summaryrefslogtreecommitdiffstats
path: root/mdk-stage1/init.c
diff options
context:
space:
mode:
Diffstat (limited to 'mdk-stage1/init.c')
-rw-r--r--mdk-stage1/init.c49
1 files changed, 25 insertions, 24 deletions
diff --git a/mdk-stage1/init.c b/mdk-stage1/init.c
index 43232b56d..b5f5631f8 100644
--- a/mdk-stage1/init.c
+++ b/mdk-stage1/init.c
@@ -139,30 +139,31 @@ void doklog()
print_warning("couldn't open tty for syslog -- still using /tmp/syslog\n");
/* now open the syslog socket */
- sockaddr.sun_family = AF_UNIX;
- strncpy(sockaddr.sun_path, "/dev/log", UNIX_PATH_MAX);
- sock = socket(AF_UNIX, SOCK_STREAM, 0);
- if (sock < 0) {
- printf("error creating socket: %d\n", errno);
- sleep(5);
- }
-
- print_str_init(log, "] got socket\n");
- if (bind(sock, (struct sockaddr *) &sockaddr, sizeof(sockaddr.sun_family) + strlen(sockaddr.sun_path))) {
- print_str_init(log, "] bind error: ");
- print_int_init(log, errno);
- print_str_init(log, "\n");
- sleep(5);
- }
-
- print_str_init(log, "] bound socket\n");
- chmod("/dev/log", 0666);
- if (listen(sock, 5)) {
- print_str_init(log, "] listen error: ");
- print_int_init(log, errno);
- print_str_init(log, "\n");
- sleep(5);
- }
+// ############# LINUX 2.4 /dev/log IS BUGGED! --> apparently the syslogs can't reach me, and it's full up after a while
+// sockaddr.sun_family = AF_UNIX;
+// strncpy(sockaddr.sun_path, "/dev/log", UNIX_PATH_MAX);
+// sock = socket(AF_UNIX, SOCK_STREAM, 0);
+// if (sock < 0) {
+// printf("error creating socket: %d\n", errno);
+// sleep(5);
+// }
+//
+// print_str_init(log, "] got socket\n");
+// if (bind(sock, (struct sockaddr *) &sockaddr, sizeof(sockaddr.sun_family) + strlen(sockaddr.sun_path))) {
+// print_str_init(log, "] bind error: ");
+// print_int_init(log, errno);
+// print_str_init(log, "\n");
+// sleep(5);
+// }
+//
+// print_str_init(log, "] bound socket\n");
+// chmod("/dev/log", 0666);
+// if (listen(sock, 5)) {
+// print_str_init(log, "] listen error: ");
+// print_int_init(log, errno);
+// print_str_init(log, "\n");
+// sleep(5);
+// }
/* disable on-console syslog output */
syslog(8, NULL, 1);
tat' width='100%'> -rw-r--r--docs/README.pxe133
-rw-r--r--docs/SHORTCUTS51
-rw-r--r--docs/TODO515
-rw-r--r--docs/advocacy87
-rw-r--r--docs/advocacy-interactive60
-rw-r--r--docs/comparisons91
-rw-r--r--docs/diskdrake.TODO23
-rw-r--r--docs/drakfont/Makefile57
-rw-r--r--docs/drakfont/dia_srcs/drakfont.diabin4599 -> 0 bytes-rw-r--r--docs/drakfont/dia_srcs/drakfont_install.diabin3662 -> 0 bytes-rw-r--r--docs/drakfont/dia_srcs/drakfont_uninstall.diabin1908 -> 0 bytes-rw-r--r--docs/drakfont/drakfont.jpgbin134044 -> 0 bytes-rw-r--r--docs/drakfont/drakfont.tex152
-rw-r--r--docs/drakfont/drakfont_install.jpgbin86455 -> 0 bytes-rw-r--r--docs/drakfont/drakfont_uninstall.jpgbin42291 -> 0 bytes-rw-r--r--docs/drakfont/mandrake.ps534
-rw-r--r--docs/draknet_advanced_doc.txt165
-rwxr-xr-xdocs/interactive/ask_from29
-rwxr-xr-xdocs/interactive/ask_from_list27
-rwxr-xr-xdocs/interactive/ask_from_listf27
-rwxr-xr-xdocs/interactive/ask_from_treelist27
-rwxr-xr-xdocs/interactive/wait_message13
-rw-r--r--docs/mdk-vs-redhat43
-rw-r--r--docs/net_object_class.fig73
-rw-r--r--docs/object_class.fig32
-rw-r--r--docs/spec-DrakX-8.0.html405
-rw-r--r--docs/wizard.doc31
-rw-r--r--kernel/.cvsignore3
-rw-r--r--kernel/Makefile13
-rwxr-xr-xkernel/check_mar.pl30
-rw-r--r--kernel/list_modules.pm186
-rw-r--r--kernel/modules.pl137
-rwxr-xr-xkernel/update_kernel100
-rw-r--r--live_update77
-rwxr-xr-xmake_boot_img512
-rw-r--r--mdk-stage1/.cvsignore12
-rw-r--r--mdk-stage1/Makefile260
-rw-r--r--mdk-stage1/Makefile.common57
-rw-r--r--mdk-stage1/Makefile.mkinitrd_helper30
-rw-r--r--mdk-stage1/adsl.c172
-rw-r--r--mdk-stage1/adsl.h34
-rw-r--r--mdk-stage1/automatic.c161
-rw-r--r--mdk-stage1/automatic.h32
-rw-r--r--mdk-stage1/bzlib/Makefile55
-rw-r--r--mdk-stage1/bzlib/blocksort.c1138
-rw-r--r--mdk-stage1/bzlib/bzlib.c1567
-rw-r--r--mdk-stage1/bzlib/bzlib.h319
-rw-r--r--mdk-stage1/bzlib/bzlib_private.h530
-rw-r--r--mdk-stage1/bzlib/compress.c720
-rw-r--r--mdk-stage1/bzlib/crctable.c148
-rw-r--r--mdk-stage1/bzlib/decompress.c664
-rw-r--r--mdk-stage1/bzlib/huffman.c232
-rw-r--r--mdk-stage1/bzlib/randtable.c128
-rw-r--r--mdk-stage1/cdrom.c181
-rw-r--r--mdk-stage1/cdrom.h29
-rw-r--r--mdk-stage1/config-stage1.h48
-rw-r--r--mdk-stage1/dhcp.c679
-rw-r--r--mdk-stage1/dhcp.h36
-rw-r--r--mdk-stage1/dietlibc/.cvsignore12
-rw-r--r--mdk-stage1/dietlibc/AUTHOR1
-rw-r--r--mdk-stage1/dietlibc/Makefile146
-rw-r--r--mdk-stage1/dietlibc/README43
-rw-r--r--mdk-stage1/dietlibc/alpha/Makefile.add5
-rw-r--r--mdk-stage1/dietlibc/alpha/__longjmp.S38
-rw-r--r--mdk-stage1/dietlibc/alpha/__time.c11
-rw-r--r--mdk-stage1/dietlibc/alpha/accept.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/bind.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/clone.S42
-rw-r--r--mdk-stage1/dietlibc/alpha/connect.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/divl.S101
-rw-r--r--mdk-stage1/dietlibc/alpha/divq.S102
-rw-r--r--mdk-stage1/dietlibc/alpha/getegid.S11
-rw-r--r--mdk-stage1/dietlibc/alpha/geteuid.S11
-rw-r--r--mdk-stage1/dietlibc/alpha/getgid.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/getpeername.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/getpid.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/getppid.S11
-rw-r--r--mdk-stage1/dietlibc/alpha/getsockname.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/getsockopt.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/getuid.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/listen.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/mmap.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/msgctl.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/msgget.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/msgrcv.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/msgsnd.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/pipe.S17
-rw-r--r--mdk-stage1/dietlibc/alpha/recv.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/recvfrom.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/recvmsg.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/reml.S101
-rw-r--r--mdk-stage1/dietlibc/alpha/remq.S97
-rw-r--r--mdk-stage1/dietlibc/alpha/semctl.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/semget.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/semop.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/send.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/sendmsg.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/sendto.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/seteuid.c7
-rw-r--r--mdk-stage1/dietlibc/alpha/setjmp.S46
-rw-r--r--mdk-stage1/dietlibc/alpha/setsockopt.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/shmat.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/shmctl.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/shmdt.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/shmget.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/shutdown.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/signal.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/sigprocmask.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/socket.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/socketcall.S5
-rw-r--r--mdk-stage1/dietlibc/alpha/start.S35
-rw-r--r--mdk-stage1/dietlibc/alpha/strlen.c32
-rw-r--r--mdk-stage1/dietlibc/alpha/time.S0
-rw-r--r--mdk-stage1/dietlibc/alpha/unified.S29
-rw-r--r--mdk-stage1/dietlibc/alpha/utime.S3
-rw-r--r--mdk-stage1/dietlibc/alpha/waitpid.S10
-rw-r--r--mdk-stage1/dietlibc/diet.c112
-rw-r--r--mdk-stage1/dietlibc/dietdirent.h6
-rw-r--r--mdk-stage1/dietlibc/dietfeatures.h42
-rw-r--r--mdk-stage1/dietlibc/dietstdarg.h12
-rw-r--r--mdk-stage1/dietlibc/dietstdio.h81
-rw-r--r--mdk-stage1/dietlibc/dietwarning.h23
-rw-r--r--mdk-stage1/dietlibc/dirstream.h78
-rw-r--r--mdk-stage1/dietlibc/i386/Makefile.add3
-rw-r--r--mdk-stage1/dietlibc/i386/__longjmp.S18
-rw-r--r--mdk-stage1/dietlibc/i386/__testandset.S8
-rw-r--r--mdk-stage1/dietlibc/i386/clone.S51
-rw-r--r--mdk-stage1/dietlibc/i386/mmap.c16
-rw-r--r--mdk-stage1/dietlibc/i386/select.S3
-rw-r--r--mdk-stage1/dietlibc/i386/setjmp.S62
-rw-r--r--mdk-stage1/dietlibc/i386/start.S42
-rw-r--r--mdk-stage1/dietlibc/i386/unified.S34
-rw-r--r--mdk-stage1/dietlibc/include/alloca.h0
-rw-r--r--mdk-stage1/dietlibc/include/arpa/inet.h19
-rw-r--r--mdk-stage1/dietlibc/include/arpa/nameser.h217
-rw-r--r--mdk-stage1/dietlibc/include/assert.h27
-rw-r--r--mdk-stage1/dietlibc/include/ctype.h28
-rw-r--r--mdk-stage1/dietlibc/include/daemon.h6
-rw-r--r--mdk-stage1/dietlibc/include/dirent.h26
-rw-r--r--mdk-stage1/dietlibc/include/dlfcn.h15
-rw-r--r--mdk-stage1/dietlibc/include/elf.h1
-rw-r--r--mdk-stage1/dietlibc/include/endian.h43
-rw-r--r--mdk-stage1/dietlibc/include/errno.h11
-rw-r--r--mdk-stage1/dietlibc/include/fcntl.h24
-rw-r--r--mdk-stage1/dietlibc/include/features.h3
-rw-r--r--mdk-stage1/dietlibc/include/fnmatch.h15
-rw-r--r--mdk-stage1/dietlibc/include/ftw.h51
-rw-r--r--mdk-stage1/dietlibc/include/getopt.h32
-rw-r--r--mdk-stage1/dietlibc/include/glob.h55
-rw-r--r--mdk-stage1/dietlibc/include/grp.h25
-rw-r--r--mdk-stage1/dietlibc/include/inttypes.h0
-rw-r--r--mdk-stage1/dietlibc/include/limits.h48
-rw-r--r--mdk-stage1/dietlibc/include/locale.h6
-rw-r--r--mdk-stage1/dietlibc/include/malloc.h1
-rw-r--r--mdk-stage1/dietlibc/include/math.h61
-rw-r--r--mdk-stage1/dietlibc/include/memory.h6
-rw-r--r--mdk-stage1/dietlibc/include/mntent.h72
-rw-r--r--mdk-stage1/dietlibc/include/net/if.h11
-rw-r--r--mdk-stage1/dietlibc/include/net/if_arp.h6
-rw-r--r--mdk-stage1/dietlibc/include/net/route.h6
-rw-r--r--mdk-stage1/dietlibc/include/netdb.h90
-rw-r--r--mdk-stage1/dietlibc/include/netinet/in.h9
-rw-r--r--mdk-stage1/dietlibc/include/netinet/in_systm.h0
-rw-r--r--mdk-stage1/dietlibc/include/netinet/ip.h6
-rw-r--r--mdk-stage1/dietlibc/include/paths.h16
-rw-r--r--mdk-stage1/dietlibc/include/pthread.h227
-rw-r--r--mdk-stage1/dietlibc/include/pwd.h24
-rw-r--r--mdk-stage1/dietlibc/include/regex.h67
-rw-r--r--mdk-stage1/dietlibc/include/resolv.h1
-rw-r--r--mdk-stage1/dietlibc/include/rpc/auth.h213
-rw-r--r--mdk-stage1/dietlibc/include/rpc/auth_des.h112
-rw-r--r--mdk-stage1/dietlibc/include/rpc/auth_unix.h90
-rw-r--r--mdk-stage1/dietlibc/include/rpc/clnt.h421
-rw-r--r--mdk-stage1/dietlibc/include/rpc/des_crypt.h97
-rw-r--r--mdk-stage1/dietlibc/include/rpc/key_prot.h346
-rw-r--r--mdk-stage1/dietlibc/include/rpc/netdb.h74
-rw-r--r--mdk-stage1/dietlibc/include/rpc/pmap_clnt.h98
-rw-r--r--mdk-stage1/dietlibc/include/rpc/pmap_prot.h108
-rw-r--r--mdk-stage1/dietlibc/include/rpc/pmap_rmt.h68
-rw-r--r--mdk-stage1/dietlibc/include/rpc/rpc.h72
-rw-r--r--mdk-stage1/dietlibc/include/rpc/rpc_des.h72
-rw-r--r--mdk-stage1/dietlibc/include/rpc/rpc_msg.h202
-rw-r--r--mdk-stage1/dietlibc/include/rpc/svc.h316
-rw-r--r--mdk-stage1/dietlibc/include/rpc/svc_auth.h54
-rw-r--r--mdk-stage1/dietlibc/include/rpc/types.h78
-rw-r--r--mdk-stage1/dietlibc/include/rpc/xdr.h379
-rw-r--r--mdk-stage1/dietlibc/include/sched.h74
-rw-r--r--mdk-stage1/dietlibc/include/scsi/scsi.h224
-rw-r--r--mdk-stage1/dietlibc/include/scsi/scsi_ioctl.h34
-rw-r--r--mdk-stage1/dietlibc/include/scsi/sg.h274
-rw-r--r--mdk-stage1/dietlibc/include/setjmp.h123
-rw-r--r--mdk-stage1/dietlibc/include/shadow.h24
-rw-r--r--mdk-stage1/dietlibc/include/signal.h35
-rw-r--r--mdk-stage1/dietlibc/include/stdint.h6
-rw-r--r--mdk-stage1/dietlibc/include/stdio.h97
-rw-r--r--mdk-stage1/dietlibc/include/stdlib.h67
-rw-r--r--mdk-stage1/dietlibc/include/string.h57
-rw-r--r--mdk-stage1/dietlibc/include/strings.h2
-rw-r--r--mdk-stage1/dietlibc/include/sys/cdefs.h36
-rw-r--r--mdk-stage1/dietlibc/include/sys/file.h19
-rw-r--r--mdk-stage1/dietlibc/include/sys/io.h41
-rw-r--r--mdk-stage1/dietlibc/include/sys/ioctl.h10
-rw-r--r--mdk-stage1/dietlibc/include/sys/ipc.h8
-rw-r--r--mdk-stage1/dietlibc/include/sys/kd.h6
-rw-r--r--mdk-stage1/dietlibc/include/sys/mman.h33
-rw-r--r--mdk-stage1/dietlibc/include/sys/mount.h19
-rw-r--r--mdk-stage1/dietlibc/include/sys/msg.h13
-rw-r--r--mdk-stage1/dietlibc/include/sys/mtio.h6
-rw-r--r--mdk-stage1/dietlibc/include/sys/param.h8
-rw-r--r--mdk-stage1/dietlibc/include/sys/poll.h11
-rw-r--r--mdk-stage1/dietlibc/include/sys/ptrace.h10
-rw-r--r--mdk-stage1/dietlibc/include/sys/reboot.h9
-rw-r--r--mdk-stage1/dietlibc/include/sys/resource.h16
-rw-r--r--mdk-stage1/dietlibc/include/sys/select.h0
-rw-r--r--mdk-stage1/dietlibc/include/sys/sem.h11
-rw-r--r--mdk-stage1/dietlibc/include/sys/sendfile.h9
-rw-r--r--mdk-stage1/dietlibc/include/sys/shm.h17
-rw-r--r--mdk-stage1/dietlibc/include/sys/signal.h1
-rw-r--r--mdk-stage1/dietlibc/include/sys/socket.h46
-rw-r--r--mdk-stage1/dietlibc/include/sys/stat.h52
-rw-r--r--mdk-stage1/dietlibc/include/sys/syscall.h6
-rw-r--r--mdk-stage1/dietlibc/include/sys/sysinfo.h9
-rw-r--r--mdk-stage1/dietlibc/include/sys/syslog.h102
-rw-r--r--mdk-stage1/dietlibc/include/sys/time.h46
-rw-r--r--mdk-stage1/dietlibc/include/sys/times.h8
-rw-r--r--mdk-stage1/dietlibc/include/sys/types.h33
-rw-r--r--mdk-stage1/dietlibc/include/sys/uio.h9
-rw-r--r--mdk-stage1/dietlibc/include/sys/un.h8
-rw-r--r--mdk-stage1/dietlibc/include/sys/utsname.h35
-rw-r--r--mdk-stage1/dietlibc/include/sys/vfs.h11
-rw-r--r--mdk-stage1/dietlibc/include/sys/wait.h37
-rw-r--r--mdk-stage1/dietlibc/include/syslog.h1
-rw-r--r--mdk-stage1/dietlibc/include/termios.h22
-rw-r--r--mdk-stage1/dietlibc/include/time.h24
-rw-r--r--mdk-stage1/dietlibc/include/unistd.h168
-rw-r--r--mdk-stage1/dietlibc/include/utime.h16
-rw-r--r--mdk-stage1/dietlibc/include/utmp.h73
-rw-r--r--mdk-stage1/dietlibc/lib/__dtostr.c104
-rw-r--r--mdk-stage1/dietlibc/lib/__fstat64.c25
-rw-r--r--mdk-stage1/dietlibc/lib/__getcwd.c10
-rw-r--r--mdk-stage1/dietlibc/lib/__isnan.c14
-rw-r--r--mdk-stage1/dietlibc/lib/__lltostr.c31
-rw-r--r--mdk-stage1/dietlibc/lib/__lstat64.c25
-rw-r--r--mdk-stage1/dietlibc/lib/__ltostr.c31
-rw-r--r--mdk-stage1/dietlibc/lib/__stat64.c25
-rw-r--r--mdk-stage1/dietlibc/lib/__stat64_cvt.c18
-rw-r--r--mdk-stage1/dietlibc/lib/__xmknod.c6
-rw-r--r--mdk-stage1/dietlibc/lib/_brk.c14
-rw-r--r--mdk-stage1/dietlibc/lib/abort.c13
-rw-r--r--mdk-stage1/dietlibc/lib/abs.c6
-rw-r--r--mdk-stage1/dietlibc/lib/accept.c14
-rw-r--r--mdk-stage1/dietlibc/lib/alarm.c47
-rw-r--r--mdk-stage1/dietlibc/lib/alloc.c243
-rw-r--r--mdk-stage1/dietlibc/lib/assert_fail.c30
-rw-r--r--mdk-stage1/dietlibc/lib/atexit.c23
-rw-r--r--mdk-stage1/dietlibc/lib/atof.c10
-rw-r--r--mdk-stage1/dietlibc/lib/atoi.c8
-rw-r--r--mdk-stage1/dietlibc/lib/atol.c8
-rw-r--r--mdk-stage1/dietlibc/lib/bind.c12
-rw-r--r--mdk-stage1/dietlibc/lib/bsearch.c20
-rw-r--r--mdk-stage1/dietlibc/lib/cfmakeraw.c14
-rw-r--r--mdk-stage1/dietlibc/lib/closedir.c10
-rw-r--r--mdk-stage1/dietlibc/lib/connect.c14
-rw-r--r--mdk-stage1/dietlibc/lib/creat.c5
-rw-r--r--mdk-stage1/dietlibc/lib/creat64.c9
-rw-r--r--mdk-stage1/dietlibc/lib/errlist.c132
-rw-r--r--mdk-stage1/dietlibc/lib/errno_location.c5
-rw-r--r--mdk-stage1/dietlibc/lib/exec_lib.c20
-rw-r--r--mdk-stage1/dietlibc/lib/exec_lib.h9
-rw-r--r--mdk-stage1/dietlibc/lib/execl.c24
-rw-r--r--mdk-stage1/dietlibc/lib/execlp.c26
-rw-r--r--mdk-stage1/dietlibc/lib/execv.c13
-rw-r--r--mdk-stage1/dietlibc/lib/execvp.c38
-rw-r--r--mdk-stage1/dietlibc/lib/ftw.c52
-rw-r--r--mdk-stage1/dietlibc/lib/getdomainname.c17
-rw-r--r--mdk-stage1/dietlibc/lib/getenv.c17
-rw-r--r--mdk-stage1/dietlibc/lib/gethostname.c18
-rw-r--r--mdk-stage1/dietlibc/lib/getopt.c118
-rw-r--r--mdk-stage1/dietlibc/lib/getpeername.c13
-rw-r--r--mdk-stage1/dietlibc/lib/getpgrp.c6
-rw-r--r--mdk-stage1/dietlibc/lib/getservent.c137
-rw-r--r--mdk-stage1/dietlibc/lib/getsockname.c13
-rw-r--r--mdk-stage1/dietlibc/lib/getsockopt.c13
-rw-r--r--mdk-stage1/dietlibc/lib/htonl.c12
-rw-r--r--mdk-stage1/dietlibc/lib/htons.c11
-rw-r--r--mdk-stage1/dietlibc/lib/if_indextoname.c29
-rw-r--r--mdk-stage1/dietlibc/lib/if_nametoindex.c27
-rw-r--r--mdk-stage1/dietlibc/lib/isalnum.c7
-rw-r--r--mdk-stage1/dietlibc/lib/isalpha.c7
-rw-r--r--mdk-stage1/dietlibc/lib/isascii.c6
-rw-r--r--mdk-stage1/dietlibc/lib/isatty.c20
-rw-r--r--mdk-stage1/dietlibc/lib/isblank.c6
-rw-r--r--mdk-stage1/dietlibc/lib/iscntrl.c7
-rw-r--r--mdk-stage1/dietlibc/lib/isdigit.c7
-rw-r--r--mdk-stage1/dietlibc/lib/isgraph.c5
-rw-r--r--mdk-stage1/dietlibc/lib/islower.c7
-rw-r--r--mdk-stage1/dietlibc/lib/isprint.c6
-rw-r--r--mdk-stage1/dietlibc/lib/ispunct.c7
-rw-r--r--mdk-stage1/dietlibc/lib/isspace.c8
-rw-r--r--mdk-stage1/dietlibc/lib/isupper.c7
-rw-r--r--mdk-stage1/dietlibc/lib/isxdigit.c5
-rw-r--r--mdk-stage1/dietlibc/lib/listen.c13
-rw-r--r--mdk-stage1/dietlibc/lib/lockf.c37
-rw-r--r--mdk-stage1/dietlibc/lib/longjmp.c51
-rw-r--r--mdk-stage1/dietlibc/lib/lseek64.c22
-rw-r--r--mdk-stage1/dietlibc/lib/memccmp.c17
-rw-r--r--mdk-stage1/dietlibc/lib/memccpy.c19
-rw-r--r--mdk-stage1/dietlibc/lib/memchr.c9
-rw-r--r--mdk-stage1/dietlibc/lib/memcmp.c16
-rw-r--r--mdk-stage1/dietlibc/lib/memcpy.c12
-rw-r--r--mdk-stage1/dietlibc/lib/memmove.c23
-rw-r--r--mdk-stage1/dietlibc/lib/memset.c9
-rw-r--r--mdk-stage1/dietlibc/lib/mkfifo.c6
-rw-r--r--mdk-stage1/dietlibc/lib/msgctl.c10
-rw-r--r--mdk-stage1/dietlibc/lib/msgget.c10
-rw-r--r--mdk-stage1/dietlibc/lib/msgrcv.c13
-rw-r--r--mdk-stage1/dietlibc/lib/msgsnd.c10
-rw-r--r--mdk-stage1/dietlibc/lib/nop.c7
-rw-r--r--mdk-stage1/dietlibc/lib/open64.c14
-rw-r--r--mdk-stage1/dietlibc/lib/opendir.c18
-rw-r--r--mdk-stage1/dietlibc/lib/perror.c22
-rw-r--r--mdk-stage1/dietlibc/lib/pread.c10
-rw-r--r--mdk-stage1/dietlibc/lib/pread64.c13
-rw-r--r--mdk-stage1/dietlibc/lib/putenv.c37
-rw-r--r--mdk-stage1/dietlibc/lib/puts.c12
-rw-r--r--mdk-stage1/dietlibc/lib/qsort.c125
-rw-r--r--mdk-stage1/dietlibc/lib/raise.c8
-rw-r--r--mdk-stage1/dietlibc/lib/rand.c9
-rw-r--r--mdk-stage1/dietlibc/lib/random.c9
-rw-r--r--mdk-stage1/dietlibc/lib/readdir.c13
-rw-r--r--mdk-stage1/dietlibc/lib/reboot.c8
-rw-r--r--mdk-stage1/dietlibc/lib/recv.c15
-rw-r--r--mdk-stage1/dietlibc/lib/recvfrom.c15
-rw-r--r--mdk-stage1/dietlibc/lib/recvmsg.c15
-rw-r--r--mdk-stage1/dietlibc/lib/remove.c11
-rw-r--r--mdk-stage1/dietlibc/lib/rewind.c6
-rw-r--r--mdk-stage1/dietlibc/lib/rewinddir.c8
-rw-r--r--mdk-stage1/dietlibc/lib/sbrk.c20
-rw-r--r--mdk-stage1/dietlibc/lib/seekdir.c8
-rw-r--r--mdk-stage1/dietlibc/lib/semctl.c10
-rw-r--r--mdk-stage1/dietlibc/lib/semget.c10
-rw-r--r--mdk-stage1/dietlibc/lib/semop.c10
-rw-r--r--mdk-stage1/dietlibc/lib/send.c15
-rw-r--r--mdk-stage1/dietlibc/lib/sendmsg.c15
-rw-r--r--mdk-stage1/dietlibc/lib/sendto.c15
-rw-r--r--mdk-stage1/dietlibc/lib/set_errno.c9
-rw-r--r--mdk-stage1/dietlibc/lib/setpgrp.c6
-rw-r--r--mdk-stage1/dietlibc/lib/setsockopt.c13
-rw-r--r--mdk-stage1/dietlibc/lib/shmat.c15
-rw-r--r--mdk-stage1/dietlibc/lib/shmctl.c10
-rw-r--r--mdk-stage1/dietlibc/lib/shmdt.c10
-rw-r--r--mdk-stage1/dietlibc/lib/shmget.c10
-rw-r--r--mdk-stage1/dietlibc/lib/shutdown.c14
-rw-r--r--mdk-stage1/dietlibc/lib/sigaddset.c15
-rw-r--r--mdk-stage1/dietlibc/lib/sigdelset.c15
-rw-r--r--mdk-stage1/dietlibc/lib/sigemptyset.c14
-rw-r--r--mdk-stage1/dietlibc/lib/sigfillset.c11
-rw-r--r--mdk-stage1/dietlibc/lib/sigismember.c21
-rw-r--r--mdk-stage1/dietlibc/lib/sigjmp.c35
-rw-r--r--mdk-stage1/dietlibc/lib/sleep.c11
-rw-r--r--mdk-stage1/dietlibc/lib/snprintf.c14
-rw-r--r--mdk-stage1/dietlibc/lib/socket.c12
-rw-r--r--mdk-stage1/dietlibc/lib/speed.c67
-rw-r--r--mdk-stage1/dietlibc/lib/sprintf.c18
-rw-r--r--mdk-stage1/dietlibc/lib/sscanf.c13
-rw-r--r--mdk-stage1/dietlibc/lib/strcasecmp.c17
-rw-r--r--mdk-stage1/dietlibc/lib/strcat.c18
-rw-r--r--mdk-stage1/dietlibc/lib/strchr.c18
-rw-r--r--mdk-stage1/dietlibc/lib/strcmp.c16
-rw-r--r--mdk-stage1/dietlibc/lib/strcpy.c15
-rw-r--r--mdk-stage1/dietlibc/lib/strcspn.c17
-rw-r--r--mdk-stage1/dietlibc/lib/strdup.c9
-rw-r--r--mdk-stage1/dietlibc/lib/strerror.c10
-rw-r--r--mdk-stage1/dietlibc/lib/strlcat.c72
-rw-r--r--mdk-stage1/dietlibc/lib/strlcpy.3169
-rw-r--r--mdk-stage1/dietlibc/lib/strlcpy.c68
-rw-r--r--mdk-stage1/dietlibc/lib/strlen.c47
-rw-r--r--mdk-stage1/dietlibc/lib/strncasecmp.c18
-rw-r--r--mdk-stage1/dietlibc/lib/strncat.c31
-rw-r--r--mdk-stage1/dietlibc/lib/strncmp.c6
-rw-r--r--mdk-stage1/dietlibc/lib/strncpy.c10
-rw-r--r--mdk-stage1/dietlibc/lib/strpbrk.c11
-rw-r--r--mdk-stage1/dietlibc/lib/strrchr.c20
-rw-r--r--mdk-stage1/dietlibc/lib/strsep.c16
-rw-r--r--mdk-stage1/dietlibc/lib/strspn.c17
-rw-r--r--mdk-stage1/dietlibc/lib/strstr.c15
-rw-r--r--mdk-stage1/dietlibc/lib/strtod.c52
-rw-r--r--mdk-stage1/dietlibc/lib/strtok.c8
-rw-r--r--mdk-stage1/dietlibc/lib/strtok_r.c21
-rw-r--r--mdk-stage1/dietlibc/lib/strtol.c15
-rw-r--r--mdk-stage1/dietlibc/lib/strtoll.c15
-rw-r--r--mdk-stage1/dietlibc/lib/strtoul.c32
-rw-r--r--mdk-stage1/dietlibc/lib/strtoull.c30
-rw-r--r--mdk-stage1/dietlibc/lib/sys_siglist.c37
-rw-r--r--mdk-stage1/dietlibc/lib/tcdrain.c8
-rw-r--r--mdk-stage1/dietlibc/lib/tcflush.c23
-rw-r--r--mdk-stage1/dietlibc/lib/tcgetattr.c7
-rw-r--r--mdk-stage1/dietlibc/lib/tcgetpgrp.c7
-rw-r--r--mdk-stage1/dietlibc/lib/tcsetattr.c27
-rw-r--r--mdk-stage1/dietlibc/lib/tcsetpgrp.c7
-rw-r--r--mdk-stage1/dietlibc/lib/telldir.c7
-rw-r--r--mdk-stage1/dietlibc/lib/tolower.c6
-rw-r--r--mdk-stage1/dietlibc/lib/toupper.c6
-rw-r--r--mdk-stage1/dietlibc/lib/ttyname.c59
-rw-r--r--mdk-stage1/dietlibc/lib/usleep.c12
-rw-r--r--mdk-stage1/dietlibc/lib/vfork.c6
-rw-r--r--mdk-stage1/dietlibc/lib/vfprintf.c19
-rw-r--r--mdk-stage1/dietlibc/lib/vprintf.c14
-rw-r--r--mdk-stage1/dietlibc/lib/vsnprintf.c238
-rw-r--r--mdk-stage1/dietlibc/lib/vsprintf.c10
-rw-r--r--mdk-stage1/dietlibc/lib/vsscanf.c304
-rw-r--r--mdk-stage1/dietlibc/lib/wait.c6
-rw-r--r--mdk-stage1/dietlibc/lib/wait3.c5
-rw-r--r--mdk-stage1/dietlibc/libcruft/___div.c11
-rw-r--r--mdk-stage1/dietlibc/libcruft/dnscruft.c115
-rw-r--r--mdk-stage1/dietlibc/libcruft/dnscruft2.c185
-rw-r--r--mdk-stage1/dietlibc/libcruft/entlib.c153
-rw-r--r--mdk-stage1/dietlibc/libcruft/entlib.h44
-rw-r--r--mdk-stage1/dietlibc/libcruft/getdtablesize.c6
-rw-r--r--mdk-stage1/dietlibc/libcruft/getgrgid.c14
-rw-r--r--mdk-stage1/dietlibc/libcruft/getgrnam.c14
-rw-r--r--mdk-stage1/dietlibc/libcruft/gethostbyaddr.c38
-rw-r--r--mdk-stage1/dietlibc/libcruft/gethostbyaddr_r.c51
-rw-r--r--mdk-stage1/dietlibc/libcruft/gethostbyname.c39
-rw-r--r--mdk-stage1/dietlibc/libcruft/gethostbyname2.c40
-rw-r--r--mdk-stage1/dietlibc/libcruft/gethostbyname2_r.c36
-rw-r--r--mdk-stage1/dietlibc/libcruft/gethostbyname_r.c30
-rw-r--r--mdk-stage1/dietlibc/libcruft/getlogin.c5
-rw-r--r--mdk-stage1/dietlibc/libcruft/getpagesize.c14
-rw-r--r--mdk-stage1/dietlibc/libcruft/getpass.c40
-rw-r--r--mdk-stage1/dietlibc/libcruft/getpwnam.c14
-rw-r--r--mdk-stage1/dietlibc/libcruft/getpwuid.c14
-rw-r--r--mdk-stage1/dietlibc/libcruft/getspnam.c14
-rw-r--r--mdk-stage1/dietlibc/libcruft/grent.c54
-rw-r--r--mdk-stage1/dietlibc/libcruft/h_errno.c1
-rw-r--r--mdk-stage1/dietlibc/libcruft/herrno_location.c5
-rw-r--r--mdk-stage1/dietlibc/libcruft/inet_addr.c11
-rw-r--r--mdk-stage1/dietlibc/libcruft/inet_aton.c43
-rw-r--r--mdk-stage1/dietlibc/libcruft/inet_ntoa.c10
-rw-r--r--mdk-stage1/dietlibc/libcruft/inet_ntoa_r.c22
-rw-r--r--mdk-stage1/dietlibc/libcruft/inet_ntop.c75
-rw-r--r--mdk-stage1/dietlibc/libcruft/inet_pton.c97
-rw-r--r--mdk-stage1/dietlibc/libcruft/initgroups.c23
-rw-r--r--mdk-stage1/dietlibc/libcruft/mkstemp.c23
-rw-r--r--mdk-stage1/dietlibc/libcruft/pwent.c43
-rw-r--r--mdk-stage1/dietlibc/libcruft/res_init.c7
-rw-r--r--mdk-stage1/dietlibc/libcruft/spent.c45
-rw-r--r--mdk-stage1/dietlibc/libcrypt/crypt.c309
-rw-r--r--mdk-stage1/dietlibc/libdl/Makefile24
-rw-r--r--mdk-stage1/dietlibc/libdl/README6
-rw-r--r--mdk-stage1/dietlibc/libdl/_dl_int.h31
-rw-r--r--mdk-stage1/dietlibc/libdl/_dl_jump.S8
-rw-r--r--mdk-stage1/dietlibc/libdl/_dl_open.c207
-rw-r--r--mdk-stage1/dietlibc/libdl/_dl_search.c84
-rw-r--r--mdk-stage1/dietlibc/libdl/dlclose.c14
-rw-r--r--mdk-stage1/dietlibc/libdl/dlerror.c4
-rw-r--r--mdk-stage1/dietlibc/libdl/dlopen.c21
-rw-r--r--mdk-stage1/dietlibc/libdl/dlsym.c7
-rw-r--r--mdk-stage1/dietlibc/libdl/elf_hash.c12
-rw-r--r--mdk-stage1/dietlibc/liblatin1/latin1-iscntrl.c5
-rw-r--r--mdk-stage1/dietlibc/liblatin1/latin1-isgraph.c4
-rw-r--r--mdk-stage1/dietlibc/liblatin1/latin1-islower.c5
-rw-r--r--mdk-stage1/dietlibc/liblatin1/latin1-isprint.c4
-rw-r--r--mdk-stage1/dietlibc/liblatin1/latin1-isupper.c5
-rw-r--r--mdk-stage1/dietlibc/libpthread/CHANGES45
-rw-r--r--mdk-stage1/dietlibc/libpthread/Makefile139
-rw-r--r--mdk-stage1/dietlibc/libpthread/README42
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_atfork.c77
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_getdetachstate.c14
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_getinheritsched.c13
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_getschedparam.c13
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_getschedpolicy.c13
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_getscope.c13
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_getstackaddr.c13
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_getstacksize.c14
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_init.c17
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_setdetachstate.c18
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_setinheritsched.c18
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_setschedparam.c23
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_setschedpolicy.c25
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_setscope.c18
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_setstackaddr.c13
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_attr_setstacksize.c17
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_cancel.c35
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_cleanup_pop.c27
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_cleanup_push.c23
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_cond_broadcast.c23
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_cond_destroy.c19
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_cond_init.c14
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_cond_signal.c24
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_cond_timedwait.c43
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_cond_wait.c37
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_condattr.c15
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_create.c76
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_detach.c36
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_exit.c17
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_getspecific.c20
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_join.c50
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_key_create.c35
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_key_delete.c21
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_mutex_destroy.c16
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_mutex_init.c18
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_mutex_lock.c33
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_mutex_trylock.c36
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_mutex_unlock.c34
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_mutexattr_getkind_np.c13
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_mutexattr_init.c15
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_mutexattr_setkind_np.c18
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_once.c9
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_self.c4
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_setcancelstate.c25
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_setcanceltype.c25
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_setspecific.c21
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_spinlock.c38
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_alloc.c26
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_close.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_create.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_fcntl.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_fsync.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_logging.c31
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_nanosleep.c11
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_open.c12
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_pause.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_read.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_sigsuspend.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_tcdrain.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_waitpid.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_sys_write.c10
-rw-r--r--mdk-stage1/dietlibc/libpthread/pthread_testcancel.c16
-rw-r--r--mdk-stage1/dietlibc/libpthread/test.c72
-rw-r--r--mdk-stage1/dietlibc/libpthread/thread_internal.c344
-rw-r--r--mdk-stage1/dietlibc/libpthread/thread_internal.h131
-rw-r--r--mdk-stage1/dietlibc/libpthread/thread_key.c41
-rw-r--r--mdk-stage1/dietlibc/libregex/rx.c434
-rw-r--r--mdk-stage1/dietlibc/librpc/auth_none.c128
-rw-r--r--mdk-stage1/dietlibc/librpc/auth_unix.c313
-rw-r--r--mdk-stage1/dietlibc/librpc/authunix_prot.c69
-rw-r--r--mdk-stage1/dietlibc/librpc/bindresvport.c79
-rw-r--r--mdk-stage1/dietlibc/librpc/clnt_generic.c112
-rw-r--r--mdk-stage1/dietlibc/librpc/clnt_perror.c302
-rw-r--r--mdk-stage1/dietlibc/librpc/clnt_raw.c230
-rw-r--r--mdk-stage1/dietlibc/librpc/clnt_simple.c116
-rw-r--r--mdk-stage1/dietlibc/librpc/clnt_tcp.c463
-rw-r--r--mdk-stage1/dietlibc/librpc/clnt_udp.c437
-rw-r--r--mdk-stage1/dietlibc/librpc/get_myaddress.c69
-rw-r--r--mdk-stage1/dietlibc/librpc/getrpcent.c274
-rw-r--r--mdk-stage1/dietlibc/librpc/getrpcport.c57
-rw-r--r--mdk-stage1/dietlibc/librpc/pmap_clnt.c118
-rw-r--r--mdk-stage1/dietlibc/librpc/pmap_getmaps.c85
-rw-r--r--mdk-stage1/dietlibc/librpc/pmap_getport.c90
-rw-r--r--mdk-stage1/dietlibc/librpc/pmap_prot.c58
-rw-r--r--mdk-stage1/dietlibc/librpc/pmap_prot2.c116
-rw-r--r--mdk-stage1/dietlibc/librpc/pmap_rmt.c403
-rw-r--r--mdk-stage1/dietlibc/librpc/rpc_callmsg.c189
-rw-r--r--mdk-stage1/dietlibc/librpc/rpc_commondata.c42
-rw-r--r--mdk-stage1/dietlibc/librpc/rpc_dtablesize.c50
-rw-r--r--mdk-stage1/dietlibc/librpc/rpc_prot.c281
-rw-r--r--mdk-stage1/dietlibc/librpc/svc.c479
-rw-r--r--mdk-stage1/dietlibc/librpc/svc_auth.c115
-rw-r--r--mdk-stage1/dietlibc/librpc/svc_auth_unix.c136
-rw-r--r--mdk-stage1/dietlibc/librpc/svc_raw.c159
-rw-r--r--mdk-stage1/dietlibc/librpc/svc_run.c71
-rw-r--r--mdk-stage1/dietlibc/librpc/svc_simple.c144
-rw-r--r--mdk-stage1/dietlibc/librpc/svc_tcp.c406
-rw-r--r--mdk-stage1/dietlibc/librpc/svc_udp.c467
-rw-r--r--mdk-stage1/dietlibc/librpc/xdr.c536
-rw-r--r--mdk-stage1/dietlibc/librpc/xdr_array.c152
-rw-r--r--mdk-stage1/dietlibc/librpc/xdr_float.c284
-rw-r--r--mdk-stage1/dietlibc/librpc/xdr_mem.c180
-rw-r--r--mdk-stage1/dietlibc/librpc/xdr_rec.c573
-rw-r--r--mdk-stage1/dietlibc/librpc/xdr_reference.c130
-rw-r--r--mdk-stage1/dietlibc/librpc/xdr_stdio.c187
-rw-r--r--mdk-stage1/dietlibc/libshell/fnmatch.c74
-rw-r--r--mdk-stage1/dietlibc/libshell/glob.c350
-rw-r--r--mdk-stage1/dietlibc/libshell/realpath.c31
-rw-r--r--mdk-stage1/dietlibc/libstdio/clearerr.c5
-rw-r--r--mdk-stage1/dietlibc/libstdio/fclose.c26
-rw-r--r--mdk-stage1/dietlibc/libstdio/fdglue.c52
-rw-r--r--mdk-stage1/dietlibc/libstdio/fdopen.c21
-rw-r--r--mdk-stage1/dietlibc/libstdio/feof.c9
-rw-r--r--mdk-stage1/dietlibc/libstdio/ferror.c5
-rw-r--r--mdk-stage1/dietlibc/libstdio/fflush.c62
-rw-r--r--mdk-stage1/dietlibc/libstdio/fgetc.c40
-rw-r--r--mdk-stage1/dietlibc/libstdio/fgets.c20
-rw-r--r--mdk-stage1/dietlibc/libstdio/fileno.c5
-rw-r--r--mdk-stage1/dietlibc/libstdio/fopen.c21
-rw-r--r--mdk-stage1/dietlibc/libstdio/fprintf.c23
-rw-r--r--mdk-stage1/dietlibc/libstdio/fputc.c19
-rw-r--r--mdk-stage1/dietlibc/libstdio/fputs.c6
-rw-r--r--mdk-stage1/dietlibc/libstdio/fread.c51
-rw-r--r--mdk-stage1/dietlibc/libstdio/freopen.c9
-rw-r--r--mdk-stage1/dietlibc/libstdio/fseek.c11
-rw-r--r--mdk-stage1/dietlibc/libstdio/ftell.c7
-rw-r--r--mdk-stage1/dietlibc/libstdio/fwrite.c30
-rw-r--r--mdk-stage1/dietlibc/libstdio/printf.c29
-rw-r--r--mdk-stage1/dietlibc/libstdio/putchar.c6
-rw-r--r--mdk-stage1/dietlibc/libstdio/setvbuf.c18
-rw-r--r--mdk-stage1/dietlibc/libstdio/stderr.c13
-rw-r--r--mdk-stage1/dietlibc/libstdio/stdin.c13
-rw-r--r--mdk-stage1/dietlibc/libstdio/stdout.c14
-rw-r--r--mdk-stage1/dietlibc/libstdio/ungetc.c11
-rw-r--r--mdk-stage1/dietlibc/libugly/asctime.c7
-rw-r--r--mdk-stage1/dietlibc/libugly/asctime_r.c29
-rw-r--r--mdk-stage1/dietlibc/libugly/asprintf.c22
-rw-r--r--mdk-stage1/dietlibc/libugly/ctime.c5
-rw-r--r--mdk-stage1/dietlibc/libugly/daemon.c35
-rw-r--r--mdk-stage1/dietlibc/libugly/endmntent.c7
-rw-r--r--mdk-stage1/dietlibc/libugly/facilitynames.c32
-rw-r--r--mdk-stage1/dietlibc/libugly/getmntent.c30
-rw-r--r--mdk-stage1/dietlibc/libugly/getprotoent.c130
-rw-r--r--mdk-stage1/dietlibc/libugly/gmtime.c6
-rw-r--r--mdk-stage1/dietlibc/libugly/gmtime_r.c35
-rw-r--r--mdk-stage1/dietlibc/libugly/isleap.c6
-rw-r--r--mdk-stage1/dietlibc/libugly/localtime.c6
-rw-r--r--mdk-stage1/dietlibc/libugly/localtime_r.c21
-rw-r--r--mdk-stage1/dietlibc/libugly/logging.c211
-rw-r--r--mdk-stage1/dietlibc/libugly/mktime.c21
-rw-r--r--mdk-stage1/dietlibc/libugly/pclose.c11
-rw-r--r--mdk-stage1/dietlibc/libugly/popen.c32
-rw-r--r--mdk-stage1/dietlibc/libugly/prioritynames.c22
-rw-r--r--mdk-stage1/dietlibc/libugly/setenv.c17
-rw-r--r--mdk-stage1/dietlibc/libugly/setmntent.c7
-rw-r--r--mdk-stage1/dietlibc/libugly/strftime.c182
-rw-r--r--mdk-stage1/dietlibc/libugly/strsignal.c92
-rw-r--r--mdk-stage1/dietlibc/libugly/system.c69
-rw-r--r--mdk-stage1/dietlibc/libugly/time_table_spd.c17
-rw-r--r--mdk-stage1/dietlibc/libugly/tzfile.c86
-rw-r--r--mdk-stage1/dietlibc/libugly/unsetenv.c6
-rw-r--r--mdk-stage1/dietlibc/ppc/Makefile.add3
-rw-r--r--mdk-stage1/dietlibc/ppc/__longjmp.S59
-rw-r--r--mdk-stage1/dietlibc/ppc/__testandset.S11
-rw-r--r--mdk-stage1/dietlibc/ppc/mmap.c37
-rw-r--r--mdk-stage1/dietlibc/ppc/setjmp.S56
-rw-r--r--mdk-stage1/dietlibc/ppc/start.S44
-rw-r--r--mdk-stage1/dietlibc/ppc/unified.S21
-rw-r--r--mdk-stage1/dietlibc/sparc/Makefile.add3
-rw-r--r--mdk-stage1/dietlibc/sparc/__longjmp.S67
-rw-r--r--mdk-stage1/dietlibc/sparc/__testandset.S6
-rw-r--r--mdk-stage1/dietlibc/sparc/clone.S45
-rw-r--r--mdk-stage1/dietlibc/sparc/fork.S25
-rw-r--r--mdk-stage1/dietlibc/sparc/mmap.c43
-rw-r--r--mdk-stage1/dietlibc/sparc/pipe.S26
-rw-r--r--mdk-stage1/dietlibc/sparc/setjmp.S37
-rw-r--r--mdk-stage1/dietlibc/sparc/shmat.c19
-rw-r--r--mdk-stage1/dietlibc/sparc/start.S46
-rw-r--r--mdk-stage1/dietlibc/sparc/udiv.S363
-rw-r--r--mdk-stage1/dietlibc/sparc/umul.S170
-rw-r--r--mdk-stage1/dietlibc/sparc/unified.S28
-rw-r--r--mdk-stage1/dietlibc/sparc/urem.S362
-rw-r--r--mdk-stage1/dietlibc/start.h14
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/_llseek.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/_newselect.c6
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/access.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/chdir.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/chmod.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/chown.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/chroot.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/clone.c1
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/close.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/dup.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/dup2.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/execve.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/exit.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/fchdir.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/fchmod.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/fchown.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/fcntl.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/flock.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/fork.c6
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/fsync.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/ftruncate.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getcwd.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getdents.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getegid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/geteuid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getgid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getgroups.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getpgid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getpid.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getppid.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getpriority.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getresgid.c8
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getresuid.c8
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getrlimit.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getrusage.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getsid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/gettimeofday.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/getuid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/ioctl.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/kill.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/lchown.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/link.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/lseek.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/mkdir.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/mknod.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/mount.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/mprotect.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/mremap.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/munmap.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/nanosleep.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/open.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/pipe.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/poll.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/read.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/readlink.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/reboot.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/rename.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/rmdir.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setdomainname.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setgid.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setgroups.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/sethostname.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setitimer.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setpgid.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setpriority.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setregid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setresgid.c8
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setresuid.c8
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setreuid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setrlimit.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setsid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/setuid.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/sigaction.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/signal.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/sigpending.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/sigprocmask.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/sigsuspend.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/socketcall.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/swapoff.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/swapon.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/symlink.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/sync.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/syslog.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/time.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/truncate.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/umask.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/umount.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/uname.c5
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/unlink.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/utime.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/vhangup.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/wait4.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/waitpid.c4
-rw-r--r--mdk-stage1/dietlibc/syscalls.c/write.c3
-rw-r--r--mdk-stage1/dietlibc/syscalls.h142
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/__getpagesize.S5
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/__pread.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/__reboot.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/_llseek.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/access.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/brk.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/chdir.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/chmod.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/chown.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/chroot.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/close.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/dup.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/dup2.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/execve.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/exit.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/fchdir.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/fchmod.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/fchown.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/fcntl.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/flock.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/fork.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/fstat.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/fstat64.S8
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/fstatfs.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/fsync.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/ftruncate.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getcwd.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getdents.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getdents64.S5
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getegid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/geteuid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getgid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getgroups.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getitimer.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getpgid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getpid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getppid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getpriority.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getresgid.S7
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getresuid.S7
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getrlimit.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getrusage.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getsid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/gettimeofday.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/getuid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/ioctl.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/ioperm.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/iopl.S6
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/ipc.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/kill.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/lchown.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/link.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/llseek.S6
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/lseek.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/lstat.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/lstat64.S8
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/mkdir.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/mknod.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/mlockall.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/mount.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/mprotect.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/mremap.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/munlockall.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/munmap.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/nanosleep.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/nice.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/open.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/pause.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/personality.S5
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/pipe.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/poll.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/ptrace.s3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/pwrite.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/query_module.S5
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/read.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/readlink.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/readv.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/rename.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/rmdir.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sched_getparam.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sched_setparam.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sched_yield.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/select.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sendfile.S6
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setdomainname.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setgid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setgroups.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sethostname.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setitimer.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setpgid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setpriority.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setregid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setresgid.S7
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setresuid.S7
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setreuid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setrlimit.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setsid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/setuid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sigaction.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sigaltstack.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/signal.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sigpending.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sigprocmask.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sigsuspend.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/socketcall.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/stat.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/stat64.S8
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/statfs.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/stime.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/swapoff.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/swapon.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/symlink.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sync.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sysctl.S5
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/sysinfo.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/syslog.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/time.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/times.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/truncate.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/umask.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/umount.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/umount2.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/uname.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/unlink.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/utime.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/vhangup.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/wait4.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/waitpid.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/write.S3
-rw-r--r--mdk-stage1/dietlibc/syscalls.s/writev.S3
-rw-r--r--mdk-stage1/disk.c342
-rw-r--r--mdk-stage1/disk.h27
-rw-r--r--mdk-stage1/dns.c213
-rw-r--r--mdk-stage1/dns.h30
-rw-r--r--mdk-stage1/doc/HACKING31
-rw-r--r--mdk-stage1/doc/README185
-rw-r--r--mdk-stage1/doc/TECH-INFOS91
-rw-r--r--mdk-stage1/doc/UPDATEMODULES74
-rw-r--r--mdk-stage1/doc/WHY-DIETLIBC50
-rw-r--r--mdk-stage1/doc/documented..frontend.h69
-rw-r--r--mdk-stage1/frontend-common.c43
-rw-r--r--mdk-stage1/frontend.h52
-rw-r--r--mdk-stage1/init-data/emptyboot.img.bz2bin6342 -> 0 bytes-rw-r--r--mdk-stage1/init-data/msgboot-blank.img.bz2bin14592 -> 0 bytes-rw-r--r--mdk-stage1/init-data/msgboot-graphicallogo-2880.img.bz2bin30301 -> 0 bytes-rw-r--r--mdk-stage1/init-data/msgboot-graphicallogo.img.bz2bin26960 -> 0 bytes-rw-r--r--mdk-stage1/init-data/msgboot.img.bz2bin30881 -> 0 bytes-rw-r--r--mdk-stage1/init-libc-headers.h44
-rw-r--r--mdk-stage1/init.c468
-rw-r--r--mdk-stage1/insmod-busybox/.cvsignore2
-rw-r--r--mdk-stage1/insmod-busybox/Config.h132
-rw-r--r--mdk-stage1/insmod-busybox/Makefile65
-rw-r--r--mdk-stage1/insmod-busybox/README8
-rw-r--r--mdk-stage1/insmod-busybox/busybox.h467
-rw-r--r--mdk-stage1/insmod-busybox/insmod-frontend.c24
-rw-r--r--mdk-stage1/insmod-busybox/insmod.c2951
-rw-r--r--mdk-stage1/insmod-busybox/loop.h5
-rw-r--r--mdk-stage1/insmod-busybox/messages.c90
-rw-r--r--mdk-stage1/insmod-busybox/utility.c1759
-rw-r--r--mdk-stage1/insmod-modutils/Makefile63
-rw-r--r--mdk-stage1/insmod-modutils/include/config.h105
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_alpha.h10
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_arm.h10
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_hppa.h9
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_hppa64.h9
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_i386.h10
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_ia64.h9
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_m68k.h10
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_mips.h24
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_ppc.h10
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_s390.h10
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_sparc.h10
-rw-r--r--mdk-stage1/insmod-modutils/include/elf_sparc64.h27
-rw-r--r--mdk-stage1/insmod-modutils/include/kallsyms.h131
-rw-r--r--mdk-stage1/insmod-modutils/include/kerneld.h46
-rw-r--r--mdk-stage1/insmod-modutils/include/modstat.h55
-rw-r--r--mdk-stage1/insmod-modutils/include/module.h210
-rw-r--r--mdk-stage1/insmod-modutils/include/obj.h275
-rw-r--r--mdk-stage1/insmod-modutils/include/util.h101
-rw-r--r--mdk-stage1/insmod-modutils/include/version.h1
-rw-r--r--mdk-stage1/insmod-modutils/insmod-frontend.c24
-rw-r--r--mdk-stage1/insmod-modutils/insmod.c1964
-rw-r--r--mdk-stage1/insmod-modutils/obj/Makefile33
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_alpha.c305
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_arm.c318
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_common.c399
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_hppa.c668
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_hppa64.c686
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_i386.c245
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_ia64.c1065
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_kallsyms.c292
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_load.c354
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_m68k.c147
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_mips.c238
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_ppc.c255
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_reloc.c435
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_s390.c245
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_sparc.c226
-rw-r--r--mdk-stage1/insmod-modutils/obj/obj_sparc64.c352
-rw-r--r--mdk-stage1/insmod-modutils/util/Makefile42
-rw-r--r--mdk-stage1/insmod-modutils/util/alias.h244
-rw-r--r--mdk-stage1/insmod-modutils/util/arch64.c35
-rw-r--r--mdk-stage1/insmod-modutils/util/config.c1591
-rw-r--r--mdk-stage1/insmod-modutils/util/gzfiles.c74
-rw-r--r--mdk-stage1/insmod-modutils/util/logger.c163
-rw-r--r--mdk-stage1/insmod-modutils/util/meta_expand.c339
-rw-r--r--mdk-stage1/insmod-modutils/util/modstat.c419
-rw-r--r--mdk-stage1/insmod-modutils/util/snap_shot.c154
-rw-r--r--mdk-stage1/insmod-modutils/util/sys_cm.c88
-rw-r--r--mdk-stage1/insmod-modutils/util/sys_dm.c37
-rw-r--r--mdk-stage1/insmod-modutils/util/sys_gks.c37
-rw-r--r--mdk-stage1/insmod-modutils/util/sys_nim.c53
-rw-r--r--mdk-stage1/insmod-modutils/util/sys_oim.c40
-rw-r--r--mdk-stage1/insmod-modutils/util/sys_qm.c56
-rw-r--r--mdk-stage1/insmod-modutils/util/xftw.c422
-rw-r--r--mdk-stage1/insmod-modutils/util/xmalloc.c39
-rw-r--r--mdk-stage1/insmod-modutils/util/xrealloc.c39
-rw-r--r--mdk-stage1/insmod-modutils/util/xstrcat.c40
-rw-r--r--mdk-stage1/insmod-modutils/util/xstrdup.c41
-rw-r--r--mdk-stage1/insmod-modutils/util/xsystem.c51
-rw-r--r--mdk-stage1/insmod.h20
-rw-r--r--mdk-stage1/linux-2.2/nfs.h226
-rw-r--r--mdk-stage1/linux-2.2/nfs_mount.h53
-rw-r--r--mdk-stage1/log.c89
-rw-r--r--mdk-stage1/log.h34
-rw-r--r--mdk-stage1/lomount.c171
-rw-r--r--mdk-stage1/lomount.h21
-rw-r--r--mdk-stage1/mar/.cvsignore1
-rw-r--r--mdk-stage1/mar/Makefile61
-rw-r--r--mdk-stage1/mar/mar-extract-only.c208
-rw-r--r--mdk-stage1/mar/mar-extract-only.h32
-rw-r--r--mdk-stage1/mar/mar-frontend.c199
-rw-r--r--mdk-stage1/mar/mar.h70
-rw-r--r--mdk-stage1/minilibc.c251
-rw-r--r--mdk-stage1/minilibc.h144
-rw-r--r--mdk-stage1/mkinitrd_helper/Makefile46
-rw-r--r--mdk-stage1/mkinitrd_helper/mkinitrd_helper.c308
-rw-r--r--mdk-stage1/modules.c437
-rw-r--r--mdk-stage1/modules.h35
-rw-r--r--mdk-stage1/modules_descr.h66
-rw-r--r--mdk-stage1/mount.c189
-rw-r--r--mdk-stage1/mount.h35
-rw-r--r--mdk-stage1/mount_rpcgen.h208
-rw-r--r--mdk-stage1/network.c833
-rw-r--r--mdk-stage1/network.h61
-rw-r--r--mdk-stage1/newt-frontend.c396
-rw-r--r--mdk-stage1/newt/Makefile56
-rw-r--r--mdk-stage1/newt/button.c190
-rw-r--r--mdk-stage1/newt/buttonbar.c46
-rw-r--r--mdk-stage1/newt/checkbox.c290
-rw-r--r--mdk-stage1/newt/checkboxtree.c714
-rw-r--r--mdk-stage1/newt/entry.c376
-rw-r--r--mdk-stage1/newt/form.c712
-rw-r--r--mdk-stage1/newt/grid.c389
-rw-r--r--mdk-stage1/newt/label.c81
-rw-r--r--mdk-stage1/newt/listbox.c752
-rw-r--r--mdk-stage1/newt/newt.c672
-rw-r--r--mdk-stage1/newt/newt.h362
-rw-r--r--mdk-stage1/newt/newt_pr.h82
-rw-r--r--mdk-stage1/newt/scale.c72
-rw-r--r--mdk-stage1/newt/scrollbar.c124
-rw-r--r--mdk-stage1/newt/textbox.c409
-rw-r--r--mdk-stage1/newt/windows.c275
-rw-r--r--mdk-stage1/nfsmount.c294
-rw-r--r--mdk-stage1/nfsmount.h328
-rw-r--r--mdk-stage1/pci-resource/.cvsignore1
-rw-r--r--mdk-stage1/pci-resource/Makefile25
-rwxr-xr-xmdk-stage1/pci-resource/update-pci-ids.pl46
-rw-r--r--mdk-stage1/pcmcia_/Makefile48
-rw-r--r--mdk-stage1/pcmcia_/bulkmem.h195
-rw-r--r--mdk-stage1/pcmcia_/cardmgr.c1652
-rw-r--r--mdk-stage1/pcmcia_/cardmgr.h112
-rw-r--r--mdk-stage1/pcmcia_/cirrus.h182
-rw-r--r--mdk-stage1/pcmcia_/cistpl.h604
-rw-r--r--mdk-stage1/pcmcia_/cs.h465
-rw-r--r--mdk-stage1/pcmcia_/cs_types.h65
-rw-r--r--mdk-stage1/pcmcia_/driver_ops.h82
-rw-r--r--mdk-stage1/pcmcia_/ds.h163
-rw-r--r--mdk-stage1/pcmcia_/i82365.h154
-rw-r--r--mdk-stage1/pcmcia_/lex_config.c2053
-rwxr-xr-xmdk-stage1/pcmcia_/merge_from_pcitable51
-rw-r--r--mdk-stage1/pcmcia_/pcmcia.h21
-rw-r--r--mdk-stage1/pcmcia_/probe.c513
-rw-r--r--mdk-stage1/pcmcia_/tcic.h266
-rw-r--r--mdk-stage1/pcmcia_/version.h4
-rw-r--r--mdk-stage1/pcmcia_/vg468.h112
-rw-r--r--mdk-stage1/pcmcia_/yacc_config.c1015
-rw-r--r--mdk-stage1/pcmcia_/yacc_config.h37
-rw-r--r--mdk-stage1/ppp/.cvsignore1
-rw-r--r--mdk-stage1/ppp/Changes-2.3441
-rw-r--r--mdk-stage1/ppp/FAQ634
-rw-r--r--mdk-stage1/ppp/PLUGINS131
-rw-r--r--mdk-stage1/ppp/README168
-rw-r--r--mdk-stage1/ppp/README.MSCHAP80284
-rw-r--r--mdk-stage1/ppp/README.cbcp97
-rw-r--r--mdk-stage1/ppp/README.linux297
-rw-r--r--mdk-stage1/ppp/README.sol2220
-rw-r--r--mdk-stage1/ppp/README.sunos462
-rw-r--r--mdk-stage1/ppp/SETUP111
-rw-r--r--mdk-stage1/ppp/chat/Makefile.linux27
-rw-r--r--mdk-stage1/ppp/chat/Makefile.linux.makeopt27
-rw-r--r--mdk-stage1/ppp/chat/Makefile.sol219
-rw-r--r--mdk-stage1/ppp/chat/Makefile.sunos419
-rw-r--r--mdk-stage1/ppp/chat/chat.8515
-rw-r--r--mdk-stage1/ppp/chat/chat.c1756
-rw-r--r--mdk-stage1/ppp/common/zlib.c5376
-rw-r--r--mdk-stage1/ppp/common/zlib.h1010
-rwxr-xr-xmdk-stage1/ppp/configure141
-rw-r--r--mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux16
-rw-r--r--mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.818
-rw-r--r--mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c92
-rw-r--r--mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh7
-rw-r--r--mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c218
-rw-r--r--mdk-stage1/ppp/etc.ppp/chap-secrets2
-rw-r--r--mdk-stage1/ppp/etc.ppp/options5
-rw-r--r--mdk-stage1/ppp/etc.ppp/options.options1
-rw-r--r--mdk-stage1/ppp/etc.ppp/pap-secrets2
-rw-r--r--mdk-stage1/ppp/include/linux/if_ppp.h155
-rw-r--r--mdk-stage1/ppp/include/linux/if_pppvar.h138
-rw-r--r--mdk-stage1/ppp/include/linux/ppp-comp.h203
-rw-r--r--mdk-stage1/ppp/include/linux/ppp_defs.h185
-rw-r--r--mdk-stage1/ppp/include/net/if_ppp.h133
-rw-r--r--mdk-stage1/ppp/include/net/ppp-comp.h165
-rw-r--r--mdk-stage1/ppp/include/net/ppp_defs.h184
-rw-r--r--mdk-stage1/ppp/include/net/pppio.h99
-rw-r--r--mdk-stage1/ppp/include/net/slcompress.h148
-rw-r--r--mdk-stage1/ppp/include/net/vjcompress.h144
-rw-r--r--mdk-stage1/ppp/include/pcap-int.h117
-rw-r--r--mdk-stage1/ppp/linux/Makefile.top55
-rw-r--r--mdk-stage1/ppp/modules/bsd-comp.c1116
-rw-r--r--mdk-stage1/ppp/modules/deflate.c760
-rw-r--r--mdk-stage1/ppp/modules/if_ppp.c865
-rw-r--r--mdk-stage1/ppp/modules/ppp.c2486
-rw-r--r--mdk-stage1/ppp/modules/ppp_ahdlc.c878
-rw-r--r--mdk-stage1/ppp/modules/ppp_comp.c1126
-rw-r--r--mdk-stage1/ppp/modules/ppp_mod.h190
-rw-r--r--mdk-stage1/ppp/modules/vjcompress.c587
-rw-r--r--mdk-stage1/ppp/pppd/.cvsignore2
-rw-r--r--mdk-stage1/ppp/pppd/Makefile59
-rw-r--r--mdk-stage1/ppp/pppd/Makefile.linux129
-rw-r--r--mdk-stage1/ppp/pppd/Makefile.linux.make131
-rw-r--r--mdk-stage1/ppp/pppd/Makefile.linux.makeopt129
-rw-r--r--mdk-stage1/ppp/pppd/Makefile.sol248
-rw-r--r--mdk-stage1/ppp/pppd/Makefile.sunos426
-rw-r--r--mdk-stage1/ppp/pppd/auth.c1939
-rw-r--r--mdk-stage1/ppp/pppd/cbcp.c456
-rw-r--r--mdk-stage1/ppp/pppd/cbcp.h26
-rw-r--r--mdk-stage1/ppp/pppd/ccp.c1257
-rw-r--r--mdk-stage1/ppp/pppd/ccp.h48
-rw-r--r--mdk-stage1/ppp/pppd/chap.c860
-rw-r--r--mdk-stage1/ppp/pppd/chap.h124
-rw-r--r--mdk-stage1/ppp/pppd/chap_ms.c338
-rw-r--r--mdk-stage1/ppp/pppd/chap_ms.h33
-rw-r--r--mdk-stage1/ppp/pppd/demand.c351
-rw-r--r--mdk-stage1/ppp/pppd/eui64.c40
-rw-r--r--mdk-stage1/ppp/pppd/eui64.h97
-rw-r--r--mdk-stage1/ppp/pppd/fsm.c762
-rw-r--r--mdk-stage1/ppp/pppd/fsm.h144
-rw-r--r--mdk-stage1/ppp/pppd/ipcp.c2054
-rw-r--r--mdk-stage1/ppp/pppd/ipcp.h73
-rw-r--r--mdk-stage1/ppp/pppd/ipv6cp.c1512
-rw-r--r--mdk-stage1/ppp/pppd/ipv6cp.h126
-rw-r--r--mdk-stage1/ppp/pppd/ipxcp.c1570
-rw-r--r--mdk-stage1/ppp/pppd/ipxcp.h71
-rw-r--r--mdk-stage1/ppp/pppd/lcp.c2224
-rw-r--r--mdk-stage1/ppp/pppd/lcp.h95
-rw-r--r--mdk-stage1/ppp/pppd/magic.c88
-rw-r--r--mdk-stage1/ppp/pppd/magic.h23
-rw-r--r--mdk-stage1/ppp/pppd/main.c1846
-rw-r--r--mdk-stage1/ppp/pppd/md4.c298
-rw-r--r--mdk-stage1/ppp/pppd/md4.h64
-rw-r--r--mdk-stage1/ppp/pppd/md5.c309
-rw-r--r--mdk-stage1/ppp/pppd/md5.h58
-rw-r--r--mdk-stage1/ppp/pppd/multilink.c397
-rw-r--r--mdk-stage1/ppp/pppd/options.c1513
-rw-r--r--mdk-stage1/ppp/pppd/patchlevel.h4
-rw-r--r--mdk-stage1/ppp/pppd/pathnames.h25
-rw-r--r--mdk-stage1/ppp/pppd/plugins/Makefile.linux19
-rw-r--r--mdk-stage1/ppp/pppd/plugins/Makefile.sol227
-rw-r--r--mdk-stage1/ppp/pppd/plugins/minconn.c46
-rw-r--r--mdk-stage1/ppp/pppd/plugins/passprompt.c108
-rw-r--r--mdk-stage1/ppp/pppd/ppp.pam6
-rw-r--r--mdk-stage1/ppp/pppd/pppd.81591
-rw-r--r--mdk-stage1/ppp/pppd/pppd.h787
-rw-r--r--mdk-stage1/ppp/pppd/pppd.h.wtmp789
-rw-r--r--mdk-stage1/ppp/pppd/sys-linux.c2672
-rw-r--r--mdk-stage1/ppp/pppd/sys-linux.c.wtmp2750
-rw-r--r--mdk-stage1/ppp/pppd/sys-solaris.c2737
-rw-r--r--mdk-stage1/ppp/pppd/sys-sunos4.c1559
-rw-r--r--mdk-stage1/ppp/pppd/tdb.c1282
-rw-r--r--mdk-stage1/ppp/pppd/tdb.h77
-rw-r--r--mdk-stage1/ppp/pppd/tty.c1164
-rw-r--r--mdk-stage1/ppp/pppd/upap.c640
-rw-r--r--mdk-stage1/ppp/pppd/upap.h87
-rw-r--r--mdk-stage1/ppp/pppd/utils.c949
-rw-r--r--mdk-stage1/ppp/pppdump/Makefile.linux17
-rw-r--r--mdk-stage1/ppp/pppdump/Makefile.linux.makeopt17
-rw-r--r--mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile17
-rw-r--r--mdk-stage1/ppp/pppdump/Makefile.sol221
-rw-r--r--mdk-stage1/ppp/pppdump/Makefile.sunos421
-rw-r--r--mdk-stage1/ppp/pppdump/bsd-comp.c750
-rw-r--r--mdk-stage1/ppp/pppdump/deflate.c344
-rw-r--r--mdk-stage1/ppp/pppdump/ppp-comp.h150
-rw-r--r--mdk-stage1/ppp/pppdump/pppdump.862
-rw-r--r--mdk-stage1/ppp/pppdump/pppdump.c502
-rw-r--r--mdk-stage1/ppp/pppdump/zlib.c4614
-rw-r--r--mdk-stage1/ppp/pppdump/zlib.h631
-rw-r--r--mdk-stage1/ppp/pppstats/Makefile.linux32
-rw-r--r--mdk-stage1/ppp/pppstats/Makefile.sol220
-rw-r--r--mdk-stage1/ppp/pppstats/Makefile.sunos430
-rw-r--r--mdk-stage1/ppp/pppstats/pppstats.8217
-rw-r--r--mdk-stage1/ppp/pppstats/pppstats.c557
-rw-r--r--mdk-stage1/ppp/sample/auth-down17
-rw-r--r--mdk-stage1/ppp/sample/auth-up17
-rw-r--r--mdk-stage1/ppp/sample/ip-down22
-rw-r--r--mdk-stage1/ppp/sample/ip-up23
-rw-r--r--mdk-stage1/ppp/sample/options153
-rw-r--r--mdk-stage1/ppp/sample/options.ttyXX14
-rw-r--r--mdk-stage1/ppp/sample/pap-secrets28
-rw-r--r--mdk-stage1/ppp/scripts/README143
-rwxr-xr-xmdk-stage1/ppp/scripts/callback77
-rw-r--r--mdk-stage1/ppp/scripts/chat-callback98
-rw-r--r--mdk-stage1/ppp/scripts/chatchat/README134
-rw-r--r--mdk-stage1/ppp/scripts/chatchat/chatchat.c409
-rw-r--r--mdk-stage1/ppp/scripts/ip-down.local.add20
-rw-r--r--mdk-stage1/ppp/scripts/ip-up.local.add24
-rw-r--r--mdk-stage1/ppp/scripts/options-rsh-loc1
-rw-r--r--mdk-stage1/ppp/scripts/options-rsh-rem1
-rw-r--r--mdk-stage1/ppp/scripts/options-ssh-loc1
-rw-r--r--mdk-stage1/ppp/scripts/options-ssh-rem1
-rwxr-xr-xmdk-stage1/ppp/scripts/ppp-off34
-rwxr-xr-xmdk-stage1/ppp/scripts/ppp-on36
-rwxr-xr-xmdk-stage1/ppp/scripts/ppp-on-dialer17
-rwxr-xr-xmdk-stage1/ppp/scripts/ppp-on-rsh72
-rwxr-xr-xmdk-stage1/ppp/scripts/ppp-on-ssh76
-rwxr-xr-xmdk-stage1/ppp/scripts/redialer96
-rw-r--r--mdk-stage1/ppp/scripts/secure-card111
-rw-r--r--mdk-stage1/ppp/solaris/Makedefs16
-rw-r--r--mdk-stage1/ppp/solaris/Makedefs.sol259
-rw-r--r--mdk-stage1/ppp/solaris/Makefile.sol266
-rw-r--r--mdk-stage1/ppp/solaris/Makefile.sol2-6485
-rw-r--r--mdk-stage1/ppp/solaris/Makefile.top50
-rw-r--r--mdk-stage1/ppp/solaris/ppp.c2486
-rw-r--r--mdk-stage1/ppp/solaris/ppp.conf1
-rw-r--r--mdk-stage1/ppp/solaris/ppp_ahdlc.c878
-rw-r--r--mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c49
-rw-r--r--mdk-stage1/ppp/solaris/ppp_comp.c1126
-rw-r--r--mdk-stage1/ppp/solaris/ppp_comp_mod.c81
-rw-r--r--mdk-stage1/ppp/solaris/ppp_mod.c174
-rw-r--r--mdk-stage1/ppp/solaris/ppp_mod.h190
-rw-r--r--mdk-stage1/ppp/sunos4/Makedefs13
-rw-r--r--mdk-stage1/ppp/sunos4/Makefile57
-rw-r--r--mdk-stage1/ppp/sunos4/Makefile.top46
-rw-r--r--mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c57
-rwxr-xr-xmdk-stage1/ppp/sunos4/ppp.INSTALL104
-rw-r--r--mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c57
-rw-r--r--mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c57
-rw-r--r--mdk-stage1/ppp/sunos4/ppp_vdcmd.c81
-rw-r--r--mdk-stage1/ppp/svr4/Makedefs16
-rw-r--r--mdk-stage1/ppp/svr4/Makedefs.sol259
-rw-r--r--mdk-stage1/ppp/svr4/Makefile.sol266
-rw-r--r--mdk-stage1/ppp/svr4/Makefile.sol2-6485
-rw-r--r--mdk-stage1/ppp/svr4/Makefile.svr460
-rw-r--r--mdk-stage1/ppp/svr4/Makefile.top50
-rw-r--r--mdk-stage1/ppp/svr4/ppp.Master1
-rw-r--r--mdk-stage1/ppp/svr4/ppp.Node1
-rw-r--r--mdk-stage1/ppp/svr4/ppp.System1
-rw-r--r--mdk-stage1/ppp/svr4/ppp.conf1
-rw-r--r--mdk-stage1/ppp/svr4/ppp_ahdl.Master1
-rw-r--r--mdk-stage1/ppp/svr4/ppp_ahdl.System1
-rw-r--r--mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c49
-rw-r--r--mdk-stage1/ppp/svr4/ppp_comp.Master1
-rw-r--r--mdk-stage1/ppp/svr4/ppp_comp.System1
-rw-r--r--mdk-stage1/ppp/svr4/ppp_comp_mod.c81
-rw-r--r--mdk-stage1/ppp/svr4/ppp_mod.c174
-rw-r--r--mdk-stage1/probing.c656
-rw-r--r--mdk-stage1/probing.h36
-rw-r--r--mdk-stage1/rescue-gui.c222
-rw-r--r--mdk-stage1/rp-pppoe/.cvsignore1
-rw-r--r--mdk-stage1/rp-pppoe/README87
-rw-r--r--mdk-stage1/rp-pppoe/configs/firewall-masq35
-rw-r--r--mdk-stage1/rp-pppoe/configs/firewall-standalone32
-rw-r--r--mdk-stage1/rp-pppoe/configs/pap-secrets9
-rw-r--r--mdk-stage1/rp-pppoe/configs/pppoe-server-options5
-rw-r--r--mdk-stage1/rp-pppoe/configs/pppoe.conf126
-rw-r--r--mdk-stage1/rp-pppoe/doc/CHANGES177
-rw-r--r--mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT295
-rw-r--r--mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE39
-rw-r--r--mdk-stage1/rp-pppoe/doc/LICENSE339
-rw-r--r--mdk-stage1/rp-pppoe/doc/PROBLEMS3
-rwxr-xr-xmdk-stage1/rp-pppoe/go43
-rwxr-xr-xmdk-stage1/rp-pppoe/go-gui92
-rw-r--r--mdk-stage1/rp-pppoe/gui/Makefile.in64
-rw-r--r--mdk-stage1/rp-pppoe/gui/html/tkpppoe.html181
-rw-r--r--mdk-stage1/rp-pppoe/gui/pppoe-wrapper.145
-rw-r--r--mdk-stage1/rp-pppoe/gui/tkpppoe.136
-rwxr-xr-xmdk-stage1/rp-pppoe/gui/tkpppoe.in2891
-rw-r--r--mdk-stage1/rp-pppoe/gui/wrapper.c234
-rw-r--r--mdk-stage1/rp-pppoe/man/adsl-connect.866
-rw-r--r--mdk-stage1/rp-pppoe/man/adsl-setup.823
-rw-r--r--mdk-stage1/rp-pppoe/man/adsl-start.827
-rw-r--r--mdk-stage1/rp-pppoe/man/adsl-status.825
-rw-r--r--mdk-stage1/rp-pppoe/man/adsl-stop.821
-rw-r--r--mdk-stage1/rp-pppoe/man/pppoe-relay.8124
-rw-r--r--mdk-stage1/rp-pppoe/man/pppoe-server.8123
-rw-r--r--mdk-stage1/rp-pppoe/man/pppoe-sniff.877
-rw-r--r--mdk-stage1/rp-pppoe/man/pppoe.8236
-rw-r--r--mdk-stage1/rp-pppoe/man/pppoe.conf.5168
-rw-r--r--mdk-stage1/rp-pppoe/rp-pppoe-gui.spec98
-rw-r--r--mdk-stage1/rp-pppoe/rp-pppoe.spec71
-rwxr-xr-xmdk-stage1/rp-pppoe/scripts/adsl-connect.in278
-rwxr-xr-xmdk-stage1/rp-pppoe/scripts/adsl-init-suse.in62
-rwxr-xr-xmdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in62
-rwxr-xr-xmdk-stage1/rp-pppoe/scripts/adsl-init.in64
-rwxr-xr-xmdk-stage1/rp-pppoe/scripts/adsl-setup.in346
-rwxr-xr-xmdk-stage1/rp-pppoe/scripts/adsl-start.in186
-rwxr-xr-xmdk-stage1/rp-pppoe/scripts/adsl-status82
-rwxr-xr-xmdk-stage1/rp-pppoe/scripts/adsl-stop.in84
-rw-r--r--mdk-stage1/rp-pppoe/src/.cvsignore2
-rw-r--r--mdk-stage1/rp-pppoe/src/Makefile58
-rw-r--r--mdk-stage1/rp-pppoe/src/Makefile.in257
-rw-r--r--mdk-stage1/rp-pppoe/src/common.c485
-rw-r--r--mdk-stage1/rp-pppoe/src/config.h135
-rw-r--r--mdk-stage1/rp-pppoe/src/config.h.in134
-rwxr-xr-xmdk-stage1/rp-pppoe/src/configure2356
-rw-r--r--mdk-stage1/rp-pppoe/src/configure.in231
-rw-r--r--mdk-stage1/rp-pppoe/src/debug.c143
-rw-r--r--mdk-stage1/rp-pppoe/src/discovery.c629
-rw-r--r--mdk-stage1/rp-pppoe/src/if.c1092
-rwxr-xr-xmdk-stage1/rp-pppoe/src/install-sh238
-rw-r--r--mdk-stage1/rp-pppoe/src/md5.c246
-rw-r--r--mdk-stage1/rp-pppoe/src/md5.h27
-rw-r--r--mdk-stage1/rp-pppoe/src/plugin.c397
-rw-r--r--mdk-stage1/rp-pppoe/src/ppp.c258
-rw-r--r--mdk-stage1/rp-pppoe/src/pppoe-server.c1247
-rw-r--r--mdk-stage1/rp-pppoe/src/pppoe-sniff.c258
-rw-r--r--mdk-stage1/rp-pppoe/src/pppoe.c834
-rw-r--r--mdk-stage1/rp-pppoe/src/pppoe.h331
-rw-r--r--mdk-stage1/rp-pppoe/src/relay.c1541
-rw-r--r--mdk-stage1/rp-pppoe/src/relay.h97
-rw-r--r--mdk-stage1/slang/Makefile56
-rw-r--r--mdk-stage1/slang/_slang.h743
-rw-r--r--mdk-stage1/slang/config.h163
-rw-r--r--mdk-stage1/slang/jdmacros.h53
-rw-r--r--mdk-stage1/slang/keywhash.c190
-rw-r--r--mdk-stage1/slang/sl-feat.h60
-rw-r--r--mdk-stage1/slang/slang.c5547
-rw-r--r--mdk-stage1/slang/slang.h1930
-rw-r--r--mdk-stage1/slang/slarith.c1656
-rw-r--r--mdk-stage1/slang/slarith.inc783
-rw-r--r--mdk-stage1/slang/slarray.c3139
-rw-r--r--mdk-stage1/slang/slarrfun.c464
-rw-r--r--mdk-stage1/slang/slarrfun.inc257
-rw-r--r--mdk-stage1/slang/slarrmis.c38
-rw-r--r--mdk-stage1/slang/slassoc.c713
-rw-r--r--mdk-stage1/slang/slbstr.c615
-rw-r--r--mdk-stage1/slang/slclass.c1391
-rw-r--r--mdk-stage1/slang/slcmd.c351
-rw-r--r--mdk-stage1/slang/slcmplex.c1142
-rw-r--r--mdk-stage1/slang/slcompat.c34
-rw-r--r--mdk-stage1/slang/slcurses.c972
-rw-r--r--mdk-stage1/slang/slcurses.h353
-rw-r--r--mdk-stage1/slang/sldisply.c2596
-rw-r--r--mdk-stage1/slang/slerr.c181
-rw-r--r--mdk-stage1/slang/slerrno.c219
-rw-r--r--mdk-stage1/slang/slgetkey.c306
-rw-r--r--mdk-stage1/slang/slimport.c281
-rw-r--r--mdk-stage1/slang/slinclud.h26
-rw-r--r--mdk-stage1/slang/slintall.c27
-rw-r--r--mdk-stage1/slang/slistruc.c218
-rw-r--r--mdk-stage1/slang/slkeymap.c596
-rw-r--r--mdk-stage1/slang/slkeypad.c163
-rw-r--r--mdk-stage1/slang/sllimits.h64
-rw-r--r--mdk-stage1/slang/slmalloc.c165
-rw-r--r--mdk-stage1/slang/slmath.c565
-rw-r--r--mdk-stage1/slang/slmemchr.c47
-rw-r--r--mdk-stage1/slang/slmemcmp.c76
-rw-r--r--mdk-stage1/slang/slmemcpy.c49
-rw-r--r--mdk-stage1/slang/slmemset.c39
-rw-r--r--mdk-stage1/slang/slmisc.c330
-rw-r--r--mdk-stage1/slang/slnspace.c242
-rw-r--r--mdk-stage1/slang/slospath.c73
-rw-r--r--mdk-stage1/slang/slpack.c785
-rw-r--r--mdk-stage1/slang/slparse.c1970
-rw-r--r--mdk-stage1/slang/slpath.c344
-rw-r--r--mdk-stage1/slang/slposdir.c1057
-rw-r--r--mdk-stage1/slang/slposio.c568
-rw-r--r--mdk-stage1/slang/slprepr.c427
-rw-r--r--mdk-stage1/slang/slproc.c155
-rw-r--r--mdk-stage1/slang/slregexp.c935
-rw-r--r--mdk-stage1/slang/slrline.c836
-rw-r--r--mdk-stage1/slang/slscanf.c718
-rw-r--r--mdk-stage1/slang/slscroll.c450
-rw-r--r--mdk-stage1/slang/slsearch.c239
-rw-r--r--mdk-stage1/slang/slsignal.c336
-rw-r--r--mdk-stage1/slang/slsmg.c1584
-rw-r--r--mdk-stage1/slang/slstd.c724
-rw-r--r--mdk-stage1/slang/slstdio.c1050
-rw-r--r--mdk-stage1/slang/slstring.c546
-rw-r--r--mdk-stage1/slang/slstrops.c1686
-rw-r--r--mdk-stage1/slang/slstruct.c932
-rw-r--r--mdk-stage1/slang/sltermin.c1155
-rw-r--r--mdk-stage1/slang/sltime.c310
-rw-r--r--mdk-stage1/slang/sltoken.c1702
-rw-r--r--mdk-stage1/slang/sltypes.c966
-rw-r--r--mdk-stage1/slang/slutty.c596
-rw-r--r--mdk-stage1/slang/slxstrng.c43
-rw-r--r--mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2bin92142 -> 0 bytes-rw-r--r--mdk-stage1/stage1-data/stage1-with-sash.tar.bz2bin345030 -> 0 bytes-rw-r--r--mdk-stage1/stage1-data/stage1.tar.bz2bin1957 -> 0 bytes-rw-r--r--mdk-stage1/stage1.c467
-rw-r--r--mdk-stage1/stage1.h59
-rw-r--r--mdk-stage1/stdio-frontend.c366
-rw-r--r--mdk-stage1/tools.c434
-rw-r--r--mdk-stage1/tools.h53
-rw-r--r--mdk-stage1/url.c501
-rw-r--r--mdk-stage1/url.h44
-rw-r--r--mdk-stage1/usb-resource/.cvsignore1
-rw-r--r--mdk-stage1/usb-resource/Makefile25
-rwxr-xr-xmdk-stage1/usb-resource/update-usb-ids.pl52
-rw-r--r--perl-install/ChangeLog25476
-rw-r--r--perl-install/Makefile237
-rw-r--r--perl-install/Makefile.config23
-rw-r--r--perl-install/Makefile.drakxtools61
-rw-r--r--perl-install/Newt/.cvsignore6
-rw-r--r--perl-install/Newt/Av_CharPtrPtr.c99
-rw-r--r--perl-install/Newt/Av_CharPtrPtr.h4
-rw-r--r--perl-install/Newt/Makefile10
-rw-r--r--perl-install/Newt/Makefile.PL13
-rw-r--r--perl-install/Newt/Newt.pm16
-rw-r--r--perl-install/Newt/Newt.xs478
-rw-r--r--perl-install/Newt/typemap25
-rw-r--r--perl-install/any.pm1188
-rw-r--r--perl-install/apps.net_monitor4
-rw-r--r--perl-install/bootloader.pm1073
-rw-r--r--perl-install/bootlook.pm321
-rw-r--r--perl-install/c.pm19
-rw-r--r--perl-install/c/.cvsignore9
-rw-r--r--perl-install/c/Makefile18
-rw-r--r--perl-install/c/Makefile.PL23
-rw-r--r--perl-install/c/README3
-rw-r--r--perl-install/c/sbus.c156
-rw-r--r--perl-install/c/silo.c817
-rw-r--r--perl-install/c/smp-test.c6
-rw-r--r--perl-install/c/smp.c509
-rw-r--r--perl-install/c/smp.h6
-rw-r--r--perl-install/c/stuff.pm34
-rw-r--r--perl-install/class_discard.pm11
-rwxr-xr-xperl-install/commands15
-rw-r--r--perl-install/commands.pm587
-rw-r--r--perl-install/common.pm186
-rw-r--r--perl-install/crypto.pm165
-rw-r--r--perl-install/detect_devices.pm633
-rw-r--r--perl-install/devices.pm185
-rw-r--r--perl-install/diskdrake/diskdrake.html139
-rw-r--r--perl-install/diskdrake/hd_gtk.pm382
-rw-r--r--perl-install/diskdrake/interactive.pm1171
-rw-r--r--perl-install/diskdrake/removable.pm53
-rw-r--r--perl-install/diskdrake/removable_gtk.pm31
-rw-r--r--perl-install/diskdrake/smbnfs_gtk.pm266
-rw-r--r--perl-install/drakxtools.spec1216
-rw-r--r--perl-install/fs.pm868
-rw-r--r--perl-install/fsedit.pm741
-rw-r--r--perl-install/ftp.pm86
-rwxr-xr-xperl-install/g_auto_install53
-rw-r--r--perl-install/harddrake/TODO169
-rw-r--r--perl-install/harddrake/data.pm70
-rw-r--r--perl-install/harddrake/ui.pmbin9700 -> 0 bytes-rw-r--r--perl-install/help.pm903
-rw-r--r--perl-install/http.pm42
-rwxr-xr-xperl-install/install238
-rw-r--r--perl-install/install2.pm642
-rw-r--r--perl-install/install_any.pm1152
-rw-r--r--perl-install/install_gtk.pm440
-rw-r--r--perl-install/install_interactive.pm272
-rw-r--r--perl-install/install_steps.pm1067
-rw-r--r--perl-install/install_steps_auto_install.pm111
-rw-r--r--perl-install/install_steps_gtk.pm695
-rw-r--r--perl-install/install_steps_interactive.pm1359
-rw-r--r--perl-install/install_steps_newt.pm61
-rw-r--r--perl-install/install_steps_stdio.pm40
-rw-r--r--perl-install/interactive.pm400
-rw-r--r--perl-install/keyboard.pm542
-rw-r--r--perl-install/lang.pm902
-rw-r--r--perl-install/list.sparc74
-rwxr-xr-xperl-install/live_install45
-rwxr-xr-xperl-install/live_install255
-rw-r--r--perl-install/log.pm58
-rw-r--r--perl-install/loopback.pm129
-rw-r--r--perl-install/lvm.pm124
-rw-r--r--perl-install/modparm.pm63
-rw-r--r--perl-install/modules.pm389
-rw-r--r--perl-install/mouse.pm565
-rw-r--r--perl-install/my_gtk.pm1323
-rw-r--r--perl-install/network.pm5
-rw-r--r--perl-install/network/adsl.pm172
-rw-r--r--perl-install/network/ethernet.pm216
-rw-r--r--perl-install/network/isdn.pm276
-rw-r--r--perl-install/network/isdn_consts.pm326
-rw-r--r--perl-install/network/modem.pm91
-rw-r--r--perl-install/network/netconnect.pm629
-rw-r--r--perl-install/network/network.pm460
-rw-r--r--perl-install/network/nfs.pm66
-rw-r--r--perl-install/network/smb.pm150
-rw-r--r--perl-install/network/smbnfs.pm58
-rw-r--r--perl-install/network/tools.pm227
-rw-r--r--perl-install/pam.net_monitor6
-rw-r--r--perl-install/partition_table.pm794
-rw-r--r--perl-install/patch/patch-oem-hp.pl323
-rwxr-xr-xperl-install/perl2etags8
-rw-r--r--perl-install/pixmaps/X.pngbin1812 -> 0 bytes-rw-r--r--perl-install/pixmaps/arrow_down.xpm14
-rw-r--r--perl-install/pixmaps/arrow_up.xpm14
-rw-r--r--perl-install/pixmaps/bootdisk.pngbin1180 -> 0 bytes-rw-r--r--perl-install/pixmaps/bootloader.pngbin1804 -> 0 bytes-rw-r--r--perl-install/pixmaps/colors.pngbin275 -> 0 bytes-rw-r--r--perl-install/pixmaps/colors16.pngbin6414 -> 0 bytes-rw-r--r--perl-install/pixmaps/colors8.pngbin798 -> 0 bytes-rw-r--r--perl-install/pixmaps/default.pngbin875 -> 0 bytes-rw-r--r--perl-install/pixmaps/eth_card_mini.pngbin2265 -> 0 bytes-rw-r--r--perl-install/pixmaps/exit.pngbin2117 -> 0 bytes-rw-r--r--perl-install/pixmaps/harddrive.pngbin2264 -> 0 bytes-rw-r--r--perl-install/pixmaps/keyboard.pngbin3115 -> 0 bytes-rw-r--r--perl-install/pixmaps/language.pngbin3297 -> 0 bytes-rw-r--r--perl-install/pixmaps/monitor-1024.pngbin7833 -> 0 bytes-rw-r--r--perl-install/pixmaps/monitor-1280.pngbin6123 -> 0 bytes-rw-r--r--perl-install/pixmaps/monitor-640.pngbin11629 -> 0 bytes-rw-r--r--perl-install/pixmaps/monitor-800.pngbin9544 -> 0 bytes-rw-r--r--perl-install/pixmaps/monitor.pngbin1813 -> 0 bytes-rw-r--r--perl-install/pixmaps/mouse.pngbin1719 -> 0 bytes-rw-r--r--perl-install/pixmaps/mouse_3b+.xpm386
-rw-r--r--perl-install/pixmaps/mouse_3b+_mini.xpm211
-rw-r--r--perl-install/pixmaps/mouse_3b.xpm386
-rw-r--r--perl-install/pixmaps/mouse_3b_mini.xpm211
-rw-r--r--perl-install/pixmaps/mouse_left.xpm142
-rw-r--r--perl-install/pixmaps/mouse_middle.xpm89
-rw-r--r--perl-install/pixmaps/mouse_right.xpm143
-rw-r--r--perl-install/pixmaps/network.pngbin1852 -> 0 bytes-rw-r--r--perl-install/pixmaps/partition.pngbin2473 -> 0 bytes-rw-r--r--perl-install/pixmaps/quit.pngbin2787 -> 0 bytes-rw-r--r--perl-install/pixmaps/rootpasswd.pngbin1799 -> 0 bytes-rw-r--r--perl-install/pixmaps/security.pngbin1799 -> 0 bytes-rw-r--r--perl-install/pixmaps/services.pngbin5048 -> 0 bytes-rw-r--r--perl-install/pixmaps/summary.pngbin1788 -> 0 bytes-rw-r--r--perl-install/pixmaps/user.pngbin3254 -> 0 bytes-rw-r--r--perl-install/pixmaps/warning.pngbin1968 -> 0 bytes-rw-r--r--perl-install/pkgs.pm1691
-rw-r--r--perl-install/printer.pm2241
-rw-r--r--perl-install/printerdrake.pm2931
-rw-r--r--perl-install/proxy.pm110
-rw-r--r--perl-install/raid.pm180
-rw-r--r--perl-install/resize_fat/.cvsignore5
-rw-r--r--perl-install/resize_fat/Makefile10
-rw-r--r--perl-install/resize_fat/Makefile.PL13
-rw-r--r--perl-install/resize_fat/README8
-rw-r--r--perl-install/resize_fat/any.pm123
-rw-r--r--perl-install/resize_fat/boot_sector.pm110
-rw-r--r--perl-install/resize_fat/c_rewritten.pm14
-rw-r--r--perl-install/resize_fat/c_rewritten.xs259
-rw-r--r--perl-install/resize_fat/dir_entry.pm77
-rw-r--r--perl-install/resize_fat/directory.pm79
-rw-r--r--perl-install/resize_fat/fat.pm138
-rw-r--r--perl-install/resize_fat/info_sector.pm37
-rw-r--r--perl-install/resize_fat/io.pm71
-rw-r--r--perl-install/resize_fat/main.pm186
-rw-r--r--perl-install/run_program.pm68
-rw-r--r--perl-install/sbus_probing/main.pm138
-rwxr-xr-xperl-install/scanner.pm227
-rw-r--r--perl-install/security/msec.pm238
-rw-r--r--perl-install/services.pm288
-rw-r--r--perl-install/share/Makefile5
-rw-r--r--perl-install/share/advertising/Makefile8
-rw-r--r--perl-install/share/advertising/list14
-rw-r--r--perl-install/share/aliases7
-rw-r--r--perl-install/share/compssList1665
-rw-r--r--perl-install/share/compssUsers92
-rw-r--r--perl-install/share/compssUsers.desktop39
-rw-r--r--perl-install/share/compssUsers.server67
-rw-r--r--perl-install/share/consolefonts/Cyr_a8x16bin9782 -> 0 bytes-rw-r--r--perl-install/share/consolefonts/lat0-sun16bin9770 -> 0 bytes-rw-r--r--perl-install/share/consolefonts/lat2-sun16bin9802 -> 0 bytes-rw-r--r--perl-install/share/consolefonts/ruscii_8x16bin9782 -> 0 bytes-rw-r--r--perl-install/share/diskdrake.rc43
-rw-r--r--perl-install/share/floppy.pngbin317 -> 0 bytes-rw-r--r--perl-install/share/fonts.tar.bz2bin1140649 -> 0 bytes-rw-r--r--perl-install/share/ftin.pngbin190 -> 0 bytes-rw-r--r--perl-install/share/ftout.pngbin190 -> 0 bytes-rwxr-xr-xperl-install/share/gen_locales.sh49
-rw-r--r--perl-install/share/help.pngbin3769 -> 0 bytes-rw-r--r--perl-install/share/install.rc21
-rw-r--r--perl-install/share/keyboards.tar.bz2bin20974 -> 0 bytes-rw-r--r--perl-install/share/keymaps.tar.bz2bin10929 -> 0 bytes-rwxr-xr-xperl-install/share/keymaps_generate18
-rwxr-xr-xperl-install/share/kmap2bkmap37
-rw-r--r--perl-install/share/list173
-rw-r--r--perl-install/share/list.alpha13
-rw-r--r--perl-install/share/list.i38611
-rw-r--r--perl-install/share/list.ia64119
-rw-r--r--perl-install/share/list.ppc15
-rw-r--r--perl-install/share/list.sparc84
-rw-r--r--perl-install/share/locales-skeleton.tar.bz2bin3355 -> 0 bytes-rw-r--r--perl-install/share/logo-mandrake.pngbin12788 -> 0 bytes-rwxr-xr-xperl-install/share/makedev.sh89
-rw-r--r--perl-install/share/po/Changelog249
-rw-r--r--perl-install/share/po/DrakX.pot10173
-rw-r--r--perl-install/share/po/Makefile75
-rw-r--r--perl-install/share/po/af.po12923
-rw-r--r--perl-install/share/po/ar.po10269
-rw-r--r--perl-install/share/po/az.po12924
-rw-r--r--perl-install/share/po/b_dump_strings.pm113
-rw-r--r--perl-install/share/po/be.po13566
-rw-r--r--perl-install/share/po/bg.po13898
-rw-r--r--perl-install/share/po/br.po12284
-rw-r--r--perl-install/share/po/bs.po12336
-rw-r--r--perl-install/share/po/ca.po14978
-rw-r--r--perl-install/share/po/cs.po12241
-rw-r--r--perl-install/share/po/cy.po12371
-rw-r--r--perl-install/share/po/da.po12282
-rw-r--r--perl-install/share/po/de.po12653
-rw-r--r--perl-install/share/po/el.po13124
-rw-r--r--perl-install/share/po/eo.po11770
-rw-r--r--perl-install/share/po/es.po12570
-rw-r--r--perl-install/share/po/et.po14194
-rw-r--r--perl-install/share/po/eu.po12369
-rwxr-xr-xperl-install/share/po/fake_c.pl22
-rw-r--r--perl-install/share/po/fi.po11489
-rw-r--r--perl-install/share/po/fr.po12589
-rw-r--r--perl-install/share/po/ga.po11023
-rw-r--r--perl-install/share/po/gl.po12241
-rwxr-xr-xperl-install/share/po/help_xml2pm.pl218
-rw-r--r--perl-install/share/po/hr.po11819
-rw-r--r--perl-install/share/po/hu.po12496
-rw-r--r--perl-install/share/po/i18n_compssUsers41
-rw-r--r--perl-install/share/po/id.po13585
-rw-r--r--perl-install/share/po/id.xsl5
-rw-r--r--perl-install/share/po/is.po12530
-rw-r--r--perl-install/share/po/it.po12041
-rw-r--r--perl-install/share/po/ja.po15415
-rw-r--r--perl-install/share/po/ko.po11766
-rw-r--r--perl-install/share/po/lt.po13994
-rw-r--r--perl-install/share/po/lv.po12830
-rw-r--r--perl-install/share/po/mt.po12071
-rw-r--r--perl-install/share/po/nl.po12264
-rw-r--r--perl-install/share/po/no.po11745
-rw-r--r--perl-install/share/po/pl.po13539
-rw-r--r--perl-install/share/po/pt.po11403
-rw-r--r--perl-install/share/po/pt_BR.po12055
-rw-r--r--perl-install/share/po/ro.po12989
-rw-r--r--perl-install/share/po/ru.po13049
-rw-r--r--perl-install/share/po/sk.po11152
-rw-r--r--perl-install/share/po/sl.po11880
-rw-r--r--perl-install/share/po/sp.po12461
-rw-r--r--perl-install/share/po/sr.po12449
-rw-r--r--perl-install/share/po/sv.po12343
-rw-r--r--perl-install/share/po/th.po11570
-rw-r--r--perl-install/share/po/tr.po12339
-rw-r--r--perl-install/share/po/uk.po14938
-rwxr-xr-xperl-install/share/po/validate.pl86
-rw-r--r--perl-install/share/po/vi.po14002
-rw-r--r--perl-install/share/po/wa.po12031
-rw-r--r--perl-install/share/po/zh_CN.po11311
-rw-r--r--perl-install/share/po/zh_TW.po11721
-rw-r--r--perl-install/share/reload.pngbin157 -> 0 bytes-rw-r--r--perl-install/share/rpmsrate571
-rw-r--r--perl-install/share/step-green-click.xpm245
-rw-r--r--perl-install/share/step-green-on.xpm242
-rw-r--r--perl-install/share/step-green.xpm243
-rw-r--r--perl-install/share/step-orange-click.xpm246
-rw-r--r--perl-install/share/step-orange-on.xpm243
-rw-r--r--perl-install/share/step-orange.xpm245
-rw-r--r--perl-install/share/step-red-click.xpm245
-rw-r--r--perl-install/share/step-red-on.xpm245
-rw-r--r--perl-install/share/step-red.xpm245
-rwxr-xr-xperl-install/share/theme-editor.pl161
-rw-r--r--perl-install/share/themes-blackwhite.rc62
-rw-r--r--perl-install/share/themes-blue.rc62
-rw-r--r--perl-install/share/themes-marble3d.rc208
-rw-r--r--perl-install/share/themes-mdk-Desktop.rc203
-rw-r--r--perl-install/share/themes-mdk.rc225
-rw-r--r--perl-install/share/themes-savane.rc62
-rw-r--r--perl-install/share/themes.rc30
-rw-r--r--perl-install/share/themes/blueHeart-button_def.pngbin2735 -> 0 bytes-rw-r--r--perl-install/share/themes/focus.pngbin345 -> 0 bytes-rw-r--r--perl-install/share/themes/marble3d-bg1.pngbin9693 -> 0 bytes-rw-r--r--perl-install/share/themes/marble3d-button1.pngbin3454 -> 0 bytes-rw-r--r--perl-install/share/themes/marble3d-button2.pngbin3840 -> 0 bytes-rw-r--r--perl-install/share/themes/marble3d-button4.pngbin2936 -> 0 bytes-rw-r--r--perl-install/share/themes/marble3d-button_def.pngbin4888 -> 0 bytes-rw-r--r--perl-install/share/themes/marble3d-check1.pngbin180 -> 0 bytes-rw-r--r--perl-install/share/themes/marble3d-check2.pngbin231 -> 0 bytes-rw-r--r--perl-install/share/themes/mdk-Desktop-bg.pngbin153 -> 0 bytes-rw-r--r--perl-install/share/themes/mdk-bg.pngbin151 -> 0 bytes-rw-r--r--perl-install/share/themes/mdk-button1.pngbin387 -> 0 bytes-rw-r--r--perl-install/share/themes/mdk-button4.pngbin369 -> 0 bytes-rw-r--r--perl-install/share/themes/mdk-check_off.pngbin754 -> 0 bytes-rw-r--r--perl-install/share/themes/mdk-check_on.pngbin850 -> 0 bytes-rw-r--r--perl-install/share/themes/mdk-toggle_off.pngbin754 -> 0 bytes-rw-r--r--perl-install/share/themes/mdk-toggle_on.pngbin850 -> 0 bytes-rwxr-xr-xperl-install/share/verify_modules.pl102
-rw-r--r--perl-install/standalone.pm186
-rwxr-xr-xperl-install/standalone/XFdrake110
-rwxr-xr-xperl-install/standalone/adduserdrake43
-rwxr-xr-xperl-install/standalone/diskdrake120
-rwxr-xr-xperl-install/standalone/drakTermServ1288
-rwxr-xr-xperl-install/standalone/drakautoinst436
-rwxr-xr-xperl-install/standalone/drakbackup3352
-rwxr-xr-xperl-install/standalone/drakboot63
-rwxr-xr-xperl-install/standalone/drakbug132
-rwxr-xr-xperl-install/standalone/drakbug_report14
-rwxr-xr-xperl-install/standalone/drakfloppy456
-rwxr-xr-xperl-install/standalone/drakfont957
-rwxr-xr-xperl-install/standalone/drakgw767
-rwxr-xr-xperl-install/standalone/drakproxy34
-rwxr-xr-xperl-install/standalone/draksec95
-rwxr-xr-xperl-install/standalone/drakxservices25
-rwxr-xr-xperl-install/standalone/drakxtv166
-rwxr-xr-xperl-install/standalone/fileshareset389
-rwxr-xr-xperl-install/standalone/harddrake26
-rw-r--r--perl-install/standalone/icons/categ.pngbin5173 -> 0 bytes-rw-r--r--perl-install/standalone/icons/drakTS.620x57.pngbin410 -> 0 bytes-rw-r--r--perl-install/standalone/icons/drakbackup.540x57.pngbin15562 -> 0 bytes-rw-r--r--perl-install/standalone/icons/drakfont.620x57.pngbin13239 -> 0 bytes-rw-r--r--perl-install/standalone/icons/eth_card_mini2.pngbin1538 -> 0 bytes-rw-r--r--perl-install/standalone/icons/fileopen.xpm34
-rw-r--r--perl-install/standalone/icons/find.xpm34
-rw-r--r--perl-install/standalone/icons/findf.xpm31
-rw-r--r--perl-install/standalone/icons/ftin.xpm30
-rw-r--r--perl-install/standalone/icons/ftout.xpm30
-rw-r--r--perl-install/standalone/icons/gmon.pngbin17411 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/cd.pngbin712 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/cpu.pngbin438 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/floppy.pngbin419 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/harddisk.pngbin731 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/harddrake.pngbin671 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/hw_mouse.pngbin606 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/hw_network.pngbin499 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/hw_printer.pngbin547 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/ide_hd.pngbin712 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/isdn.pngbin584 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/joystick.pngbin592 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/keyboard.pngbin798 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/memory.pngbin527 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/modem.pngbin533 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/scanner.pngbin685 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/scsi.pngbin390 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/scsi_hd.pngbin677 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/sound.pngbin435 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/tape.pngbin374 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/tv.pngbin543 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/unknown.pngbin461 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/usb.pngbin432 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/video.pngbin526 -> 0 bytes-rw-r--r--perl-install/standalone/icons/harddrake2/webcam.pngbin444 -> 0 bytes-rw-r--r--perl-install/standalone/icons/hori.pngbin7232 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic-drakfont-48.pngbin3337 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-CD-40.pngbin1444 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-back-up-16.pngbin594 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-back-up-32.pngbin3153 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-back-up-48.pngbin4735 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-discdurwhat-40.pngbin1873 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-dossier-32.pngbin818 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-moreoption-40.pngbin1891 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-network-40.pngbin952 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-others-40.pngbin2230 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-system-40.pngbin1169 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-systemeplus-40.pngbin1551 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-tape-40.pngbin2389 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-users-40.pngbin1836 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-when-40.pngbin1834 -> 0 bytes-rw-r--r--perl-install/standalone/icons/ic82-where-40.pngbin1124 -> 0 bytes-rw-r--r--perl-install/standalone/icons/mdk_logo.pngbin10892 -> 0 bytes-rw-r--r--perl-install/standalone/icons/net_c.pngbin3198 -> 0 bytes-rw-r--r--perl-install/standalone/icons/net_d.pngbin3192 -> 0 bytes-rw-r--r--perl-install/standalone/icons/net_u.pngbin2866 -> 0 bytes-rw-r--r--perl-install/standalone/icons/reload.xpm31
-rw-r--r--perl-install/standalone/icons/smbnfs_default.pngbin279 -> 0 bytes-rw-r--r--perl-install/standalone/icons/smbnfs_has_mntpoint.pngbin300 -> 0 bytes-rw-r--r--perl-install/standalone/icons/smbnfs_mounted.pngbin295 -> 0 bytes-rw-r--r--perl-install/standalone/icons/smbnfs_server.pngbin314 -> 0 bytes-rw-r--r--perl-install/standalone/icons/tradi.pngbin32579 -> 0 bytes-rw-r--r--perl-install/standalone/icons/verti.pngbin21123 -> 0 bytes-rw-r--r--perl-install/standalone/icons/wiz_default_left.pngbin2185 -> 0 bytes-rw-r--r--perl-install/standalone/icons/wiz_default_up.pngbin14567 -> 0 bytes-rw-r--r--perl-install/standalone/icons/wiz_drakgw.pngbin8733 -> 0 bytes-rw-r--r--perl-install/standalone/icons/wiz_firewall.pngbin7016 -> 0 bytes-rw-r--r--perl-install/standalone/icons/wiz_printerdrake.pngbin11340 -> 0 bytes-rw-r--r--perl-install/standalone/icons/wiz_scannerdrake.pngbin7158 -> 0 bytes-rw-r--r--perl-install/standalone/interactive_http/Makefile21
-rw-r--r--perl-install/standalone/interactive_http/authorised_progs13
-rw-r--r--perl-install/standalone/interactive_http/index.html.pl14
-rwxr-xr-xperl-install/standalone/interactive_http/interactive_http.cgi95
-rw-r--r--perl-install/standalone/interactive_http/miniserv.conf13
-rw-r--r--perl-install/standalone/interactive_http/miniserv.init51
-rw-r--r--perl-install/standalone/interactive_http/miniserv.logrotate7
-rw-r--r--perl-install/standalone/interactive_http/miniserv.pam5
-rw-r--r--perl-install/standalone/interactive_http/miniserv.pem18
-rw-r--r--perl-install/standalone/interactive_http/miniserv.pl1817
-rw-r--r--perl-install/standalone/interactive_http/miniserv.users1
-rwxr-xr-xperl-install/standalone/keyboarddrake72
-rwxr-xr-xperl-install/standalone/livedrake46
-rw-r--r--perl-install/standalone/localedrake40
-rwxr-xr-xperl-install/standalone/logdrake681
-rwxr-xr-xperl-install/standalone/lsnetdrake29
-rwxr-xr-xperl-install/standalone/mousedrake77
-rwxr-xr-xperl-install/standalone/net_monitor540
-rwxr-xr-xperl-install/standalone/printerdrake72
-rwxr-xr-xperl-install/standalone/scannerdrake148
-rwxr-xr-xperl-install/standalone/service_harddrake100
-rw-r--r--perl-install/standalone/service_harddrake.sh53
-rw-r--r--perl-install/steps.pm51
-rw-r--r--perl-install/swap.pm136
-rw-r--r--perl-install/timezone.pm198
-rw-r--r--perl-install/unused/.cvsignore1
-rw-r--r--perl-install/unused/cdrom.pm41
-rw-r--r--perl-install/unused/christmas-karaoke.patch98
-rw-r--r--perl-install/unused/dns.pm64
-rw-r--r--perl-install/unused/otherinsmod.pm26
-rw-r--r--perl-install/unused/scsi.pm104
-rwxr-xr-xperl-install/verify_c15
-rw-r--r--rescue/.cvsignore2
-rw-r--r--rescue/Makefile14
-rw-r--r--rescue/aliases4
-rw-r--r--rescue/devices.pl53
-rw-r--r--rescue/dirs8
-rwxr-xr-xrescue/drvinst84
-rwxr-xr-xrescue/guessmounts102
-rwxr-xr-xrescue/install_bootloader47
-rw-r--r--rescue/kernel_read_part.c26
-rw-r--r--rescue/list139
-rw-r--r--rescue/list.alpha2
-rw-r--r--rescue/list.i38613
-rw-r--r--rescue/list.ia649
-rw-r--r--rescue/list.ppc10
-rw-r--r--rescue/list.sparc3
-rwxr-xr-xrescue/lsparts127
-rwxr-xr-xrescue/make_rescue_img135
-rwxr-xr-xrescue/rescue-doc61
-rwxr-xr-xrescue/restore_ms_boot108
-rwxr-xr-xrescue/tree/bin/insmod3
-rwxr-xr-xrescue/tree/bin/login2
-rw-r--r--rescue/tree/boot/grub/menu.lst5
-rw-r--r--rescue/tree/etc/fstab4
-rw-r--r--rescue/tree/etc/group1
-rw-r--r--rescue/tree/etc/host.conf2
-rw-r--r--rescue/tree/etc/hosts1
-rw-r--r--rescue/tree/etc/inittab14
-rw-r--r--rescue/tree/etc/issue27
-rwxr-xr-xrescue/tree/etc/oem991
-rw-r--r--rescue/tree/etc/passwd3
-rw-r--r--rescue/tree/etc/profile25
-rwxr-xr-xrescue/tree/etc/rc.reboot8
-rwxr-xr-xrescue/tree/etc/rc.sysinit46
-rw-r--r--rescue/tree/etc/resolv.conf2
-rwxr-xr-xrescue/tree/sbin/fakeshutdown39
-rwxr-xr-xrescue/tree/sbin/modprobe40
-rw-r--r--rescue/tree/usr/lib/CVS.0
-rw-r--r--tools/.cvsignore4
-rw-r--r--tools/2adsldb.pm17
-rw-r--r--tools/2isdndb.pm25
-rw-r--r--tools/Makefile32
-rwxr-xr-xtools/addchangelog.pl18
-rw-r--r--tools/aewm-drakx/.cvsignore1
-rw-r--r--tools/aewm-drakx/Makefile10
-rw-r--r--tools/aewm-drakx/README53
-rw-r--r--tools/aewm-drakx/aewm-drakx.c50
-rw-r--r--tools/aewm-drakx/aewm.h34
-rw-r--r--tools/aewm-drakx/client.c122
-rw-r--r--tools/aewm-drakx/events.c106
-rw-r--r--tools/aewm-drakx/misc.c30
-rw-r--r--tools/alpha/cd/Makefile8
-rw-r--r--tools/alpha/cd/README40
-rw-r--r--tools/alpha/cd/README.milo13
-rw-r--r--tools/alpha/cd/aboot.cnf3
-rw-r--r--tools/alpha/cd/up1000/5100440A.txt25
-rw-r--r--tools/alpha/cd/up1000/README.txt16
-rwxr-xr-xtools/alpha/cd/up1000/apb.cfg2
-rwxr-xr-xtools/alpha/cd/up1000/apb.exebin120832 -> 0 bytes-rw-r--r--tools/alpha/cd/up1000/install.txt356
-rw-r--r--tools/alpha/cd/up1000/up1000.palbin30464 -> 0 bytes-rwxr-xr-xtools/alpha/e2fsck.sharedbin111080 -> 0 bytes-rwxr-xr-xtools/closurepkgs108
-rwxr-xr-xtools/cvslog2changelog.pl77
-rw-r--r--tools/extractchangelog2
-rwxr-xr-xtools/gencompss14
-rwxr-xr-xtools/gencryptofiles115
-rwxr-xr-xtools/genmodparm145
-rwxr-xr-xtools/i386/busyboxbin55508 -> 0 bytes-rwxr-xr-xtools/i386/e2fsck.sharedbin80308 -> 0 bytes-rwxr-xr-xtools/i386/mkreiserfsbin15868 -> 0 bytes-rw-r--r--tools/i386/netboot/.cvsignore4
-rw-r--r--tools/i386/netboot/3c503/nbgrubbin106660 -> 0 bytes-rw-r--r--tools/i386/netboot/3c503/pxegrubbin107684 -> 0 bytes-rwxr-xr-xtools/i386/netboot/3c503/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/3c503/stage2bin106660 -> 0 bytes-rw-r--r--tools/i386/netboot/3c507/nbgrubbin106208 -> 0 bytes-rw-r--r--tools/i386/netboot/3c507/pxegrubbin107232 -> 0 bytes-rwxr-xr-xtools/i386/netboot/3c507/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/3c507/stage2bin106272 -> 0 bytes-rw-r--r--tools/i386/netboot/3c509/nbgrubbin106712 -> 0 bytes-rw-r--r--tools/i386/netboot/3c509/pxegrubbin107736 -> 0 bytes-rwxr-xr-xtools/i386/netboot/3c509/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/3c509/stage2bin106744 -> 0 bytes-rw-r--r--tools/i386/netboot/3c529/nbgrubbin107592 -> 0 bytes-rw-r--r--tools/i386/netboot/3c529/pxegrubbin108616 -> 0 bytes-rwxr-xr-xtools/i386/netboot/3c529/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/3c529/stage2bin107624 -> 0 bytes-rw-r--r--tools/i386/netboot/3c595/nbgrubbin109440 -> 0 bytes-rw-r--r--tools/i386/netboot/3c595/pxegrubbin110464 -> 0 bytes-rwxr-xr-xtools/i386/netboot/3c595/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/3c595/stage2bin109440 -> 0 bytes-rw-r--r--tools/i386/netboot/3c90x/nbgrubbin111360 -> 0 bytes-rw-r--r--tools/i386/netboot/3c90x/pxegrubbin112384 -> 0 bytes-rwxr-xr-xtools/i386/netboot/3c90x/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/3c90x/stage2bin111360 -> 0 bytes-rw-r--r--tools/i386/netboot/depca/nbgrubbin106376 -> 0 bytes-rw-r--r--tools/i386/netboot/depca/pxegrubbin107400 -> 0 bytes-rwxr-xr-xtools/i386/netboot/depca/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/depca/stage2bin106440 -> 0 bytes-rw-r--r--tools/i386/netboot/device.map1
-rw-r--r--tools/i386/netboot/eepro/nbgrubbin106472 -> 0 bytes-rw-r--r--tools/i386/netboot/eepro/pxegrubbin107496 -> 0 bytes-rwxr-xr-xtools/i386/netboot/eepro/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/eepro/stage2bin106504 -> 0 bytes-rw-r--r--tools/i386/netboot/eepro100/nbgrubbin109408 -> 0 bytes-rw-r--r--tools/i386/netboot/eepro100/pxegrubbin110432 -> 0 bytes-rwxr-xr-xtools/i386/netboot/eepro100/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/eepro100/stage2bin109472 -> 0 bytes-rw-r--r--tools/i386/netboot/epic100/nbgrubbin108160 -> 0 bytes-rw-r--r--tools/i386/netboot/epic100/pxegrubbin109184 -> 0 bytes-rwxr-xr-xtools/i386/netboot/epic100/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/epic100/stage2bin108192 -> 0 bytes-rw-r--r--tools/i386/netboot/exos205/nbgrubbin106560 -> 0 bytes-rw-r--r--tools/i386/netboot/exos205/pxegrubbin107584 -> 0 bytes-rwxr-xr-xtools/i386/netboot/exos205/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/exos205/stage2bin106592 -> 0 bytes-rwxr-xr-xtools/i386/netboot/grubbin355291 -> 0 bytes-rw-r--r--tools/i386/netboot/lance/nbgrubbin108512 -> 0 bytes-rw-r--r--tools/i386/netboot/lance/pxegrubbin109536 -> 0 bytes-rwxr-xr-xtools/i386/netboot/lance/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/lance/stage2bin108512 -> 0 bytes-rwxr-xr-xtools/i386/netboot/makeImages31
-rwxr-xr-xtools/i386/netboot/make_boot_network17
-rw-r--r--tools/i386/netboot/menu.lst.example21
-rw-r--r--tools/i386/netboot/ne/nbgrubbin106280 -> 0 bytes-rw-r--r--tools/i386/netboot/ne/pxegrubbin107304 -> 0 bytes-rwxr-xr-xtools/i386/netboot/ne/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/ne/stage2bin106344 -> 0 bytes-rw-r--r--tools/i386/netboot/ne2100/nbgrubbin106620 -> 0 bytes-rw-r--r--tools/i386/netboot/ne2100/pxegrubbin107644 -> 0 bytes-rwxr-xr-xtools/i386/netboot/ne2100/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/ne2100/stage2bin106652 -> 0 bytes-rw-r--r--tools/i386/netboot/ni5010/nbgrubbin105608 -> 0 bytes-rw-r--r--tools/i386/netboot/ni5010/pxegrubbin106632 -> 0 bytes-rwxr-xr-xtools/i386/netboot/ni5010/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/ni5010/stage2bin105640 -> 0 bytes-rw-r--r--tools/i386/netboot/ni5210/nbgrubbin106336 -> 0 bytes-rw-r--r--tools/i386/netboot/ni5210/pxegrubbin107360 -> 0 bytes-rwxr-xr-xtools/i386/netboot/ni5210/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/ni5210/stage2bin106368 -> 0 bytes-rw-r--r--tools/i386/netboot/ni6510/nbgrubbin106588 -> 0 bytes-rw-r--r--tools/i386/netboot/ni6510/pxegrubbin107612 -> 0 bytes-rwxr-xr-xtools/i386/netboot/ni6510/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/ni6510/stage2bin106620 -> 0 bytes-rw-r--r--tools/i386/netboot/ns8390/nbgrubbin108664 -> 0 bytes-rw-r--r--tools/i386/netboot/ns8390/pxegrubbin109688 -> 0 bytes-rwxr-xr-xtools/i386/netboot/ns8390/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/ns8390/stage2bin108696 -> 0 bytes-rw-r--r--tools/i386/netboot/otulip/nbgrubbin108484 -> 0 bytes-rw-r--r--tools/i386/netboot/otulip/pxegrubbin109508 -> 0 bytes-rwxr-xr-xtools/i386/netboot/otulip/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/otulip/stage2bin108516 -> 0 bytes-rw-r--r--tools/i386/netboot/rtl8139/nbgrubbin108000 -> 0 bytes-rw-r--r--tools/i386/netboot/rtl8139/pxegrubbin109024 -> 0 bytes-rwxr-xr-xtools/i386/netboot/rtl8139/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/rtl8139/stage2bin108000 -> 0 bytes-rw-r--r--tools/i386/netboot/sis900/nbgrubbin112392 -> 0 bytes-rw-r--r--tools/i386/netboot/sis900/pxegrubbin113416 -> 0 bytes-rwxr-xr-xtools/i386/netboot/sis900/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/sis900/stage2bin112392 -> 0 bytes-rw-r--r--tools/i386/netboot/sk_g16/nbgrubbin106500 -> 0 bytes-rw-r--r--tools/i386/netboot/sk_g16/pxegrubbin107524 -> 0 bytes-rwxr-xr-xtools/i386/netboot/sk_g16/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/sk_g16/stage2bin106532 -> 0 bytes-rw-r--r--tools/i386/netboot/smc9000/nbgrubbin106976 -> 0 bytes-rw-r--r--tools/i386/netboot/smc9000/pxegrubbin108000 -> 0 bytes-rwxr-xr-xtools/i386/netboot/smc9000/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/smc9000/stage2bin106976 -> 0 bytes-rwxr-xr-xtools/i386/netboot/stage1.3c59xbin512 -> 0 bytes-rwxr-xr-xtools/i386/netboot/stage1.3c90xbin512 -> 0 bytes-rwxr-xr-xtools/i386/netboot/stage1.eepro100bin512 -> 0 bytes-rwxr-xr-xtools/i386/netboot/stage1.rtl8139bin512 -> 0 bytes-rwxr-xr-xtools/i386/netboot/stage1.tulipbin512 -> 0 bytes-rwxr-xr-xtools/i386/netboot/stage1.via-rhinebin512 -> 0 bytes-rw-r--r--tools/i386/netboot/stage2.3c59xbin80564 -> 0 bytes-rw-r--r--tools/i386/netboot/stage2.3c90xbin111100 -> 0 bytes-rw-r--r--tools/i386/netboot/stage2.eepro100bin107584 -> 0 bytes-rw-r--r--tools/i386/netboot/stage2.rtl8139bin108028 -> 0 bytes-rw-r--r--tools/i386/netboot/stage2.tulipbin94396 -> 0 bytes-rw-r--r--tools/i386/netboot/stage2.via-rhinebin88208 -> 0 bytes-rw-r--r--tools/i386/netboot/tiara/nbgrubbin105188 -> 0 bytes-rw-r--r--tools/i386/netboot/tiara/pxegrubbin106212 -> 0 bytes-rwxr-xr-xtools/i386/netboot/tiara/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/tiara/stage2bin105252 -> 0 bytes-rw-r--r--tools/i386/netboot/tulip/nbgrubbin119404 -> 0 bytes-rw-r--r--tools/i386/netboot/tulip/pxegrubbin120428 -> 0 bytes-rwxr-xr-xtools/i386/netboot/tulip/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/tulip/stage2bin119404 -> 0 bytes-rw-r--r--tools/i386/netboot/w89c840/nbgrubbin109356 -> 0 bytes-rw-r--r--tools/i386/netboot/w89c840/pxegrubbin110380 -> 0 bytes-rwxr-xr-xtools/i386/netboot/w89c840/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/w89c840/stage2bin109388 -> 0 bytes-rw-r--r--tools/i386/netboot/wd/nbgrubbin106760 -> 0 bytes-rw-r--r--tools/i386/netboot/wd/pxegrubbin107784 -> 0 bytes-rwxr-xr-xtools/i386/netboot/wd/stage1bin512 -> 0 bytes-rw-r--r--tools/i386/netboot/wd/stage2bin106792 -> 0 bytes-rwxr-xr-xtools/i386/shbin153752 -> 0 bytes-rwxr-xr-xtools/ia64/e2fsck.sharedbin1060504 -> 0 bytes-rwxr-xr-xtools/ia64/elilo.efibin315800 -> 0 bytes-rwxr-xr-xtools/mailchangelog.pl14
-rwxr-xr-xtools/make_mdkinst_stage277
-rwxr-xr-xtools/mkhdlist16
-rw-r--r--tools/ntp_servers.pl298
-rwxr-xr-xtools/oem-prepare477
-rwxr-xr-xtools/patch_pcmcia_config.pl28
-rw-r--r--tools/ppc/README39
-rwxr-xr-xtools/ppc/Xpmacbin3762427 -> 0 bytes-rwxr-xr-xtools/ppc/convert5
-rw-r--r--tools/ppc/e2fsck.sharedbin101469 -> 0 bytes-rwxr-xr-xtools/ppc/magic81
-rwxr-xr-xtools/ppc/mapping20
-rwxr-xr-xtools/ppc/mkINSTALLCD78
-rwxr-xr-xtools/ppc/mkhybrid-1.12b5.4bin488623 -> 0 bytes-rwxr-xr-xtools/ppc/mkhybrid-1.12b5.4-x86bin194471 -> 0 bytes-rw-r--r--tools/ppc/yabootbin58556 -> 0 bytes-rwxr-xr-xtools/sparc/e2fsck.sharedbin125624 -> 0 bytes-rwxr-xr-xtools/specific_arch9
-rwxr-xr-xtools/syncrpms263
-rwxr-xr-xtools/updatehdlist10
-rw-r--r--tools/xhost+.c11
1997 files changed, 0 insertions, 949989 deletions
diff --git a/.cvsignore b/.cvsignore
deleted file mode 100644
index 2a8035f11..000000000
--- a/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-docs
-images
-unused
-drakxtools.tar.bz2
-isolinux
diff --git a/Makefile b/Makefile
deleted file mode 100644
index e9901a465..000000000
--- a/Makefile
+++ /dev/null
@@ -1,109 +0,0 @@
-ROOTDEST = /export
-
-DIRS = tools kernel mdk-stage1 perl-install
-
-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
-ifeq (i386,$(ARCH))
- BOOT_IMG = cdrom.img hd.img network.img usb.img blank.img pcmcia.img other.img
-endif
-ifeq (sparc,$(ARCH))
- BOOT_IMG = cdrom.img hd.img network.img live.img tftp.img tftprd.img
- BOOT_IMG += cdrom64.img hd64.img network64.img live64.img tftp64.img tftprd64.img
-endif
-ifeq (ppc,$(ARCH))
- BOOT_IMG = all.img
-endif
-ifeq (ia64,$(ARCH))
- BOOT_IMG = all.img
-endif
-
-FBOOT_IMG = $(BOOT_IMG:%=images/%)
-FBOOT_RDZ = $(FBOOT_IMG:%.img=%.rdz) images/all.rdz
-
-.PHONY: dirs install
-
-install: dirs images rescue install_only
-
-dirs:
- @for n in $(DIRS); do $(MAKE) -C $$n all || exit 1 ; done
-
-images: $(FBOOT_IMG)
-
-$(FBOOT_RDZ): kernel/all.modules
- ./make_boot_img $@ `basename $(@:%.rdz=%)`
-
-$(FBOOT_IMG): %.img: %.rdz
- ./make_boot_img $@ `basename $(@:%.img=%)`
-
-tar: clean
- rpm -qa > needed_rpms.lst
- cd .. ; tar cfj gi.tar.bz2 gi
- rm needed_rpms.lst
-
-install_only:
- for i in images misc Mandrake Mandrake/base Mandrake/share; do install -d $(ROOTDEST)/$$i ; done
- ifneq (ppc,$(ARCH))
- for i in $(FBOOT_IMG); do cp -f $${i}* $(ROOTDEST)/images; done
- endif
- ifeq (alpha,$(ARCH))
- for i in $(FBOOT_RDZ); do cp -f $${i}* $(ROOTDEST)/boot; done
- cp -f vmlinux.gz $(ROOTDEST)/boot/instboot.gz
- make -C tools/$(ARCH)/cd install ROOTDEST=$(ROOTDEST)
- endif
- cd $(ROOTDEST)/images; rm -rf alternatives
- if [ `ls $(ROOTDEST)/images/*.img-* 2>/dev/null | wc -l` -gt 0 ]; then \
- cd $(ROOTDEST)/images; mkdir alternatives; cd alternatives; mv ../*.img-* .; md5sum *.img-* > MD5SUM; \
- fi
- cd $(ROOTDEST)/images; md5sum *.img* > MD5SUM
-
- ifeq (i386,$(ARCH))
- rm -rf $(ROOTDEST)/isolinux
- cp -af isolinux $(ROOTDEST)
- endif
-
- install live_update $(ROOTDEST)/live_update
- make -C perl-install full_stage2
- make -C perl-install/share/advertising install
-
-clean:
- rm -rf images all.modules all.modules64
- for i in $(DIRS) rescue; do make -C $$i clean; done
- find . -name "*~" -o -name ".#*" | xargs rm -f
-
-check:
- @badrights=`find $(ROOTDEST)/Mandrake/mdkinst | perl -lne 'print if !((stat)[2] & 4)'`; [ -z "$$badrights" ] || { echo "bad rights for files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$badrights" ; echo "bad rights for files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
- @missing_kb=`find -name "Entries" | xargs perl -F/ -alne 'print $$ARGV =~ m|(.*)/CVS|, "/$$F[1]" if $$F[1] =~ /\.(png|gif|bmp|xcf|gz|bz2|tar|rdz|so|a|o|mar|img|exe)$$/ && $$F[4] ne "-kb"'` ; [ -z "$$missing_kb" ] || { echo "missing -kb in CVS for files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$missing_kb" ; echo "missing -kb in CVS for files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
- $(MAKE) -C perl-install check
-
-upload:
- $(MAKE) clean
-
-# # done before make install to increment ChangeLog version
- tools/addchangelog.pl tools/cvslog2changelog.pl | tools/mailchangelog.pl &
-
- $(MAKE) install
- $(MAKE) check
- $(MAKE) upload_only
-
-upload_only:
- function upload() { rsync -qSavz --verbose --exclude '*~' -e ssh --delete $(ROOTDEST)/$$1/$$2 mandrake@ken:/c/cooker/$$1; } ;\
- upload Mandrake/mdkinst '' ;\
- upload Mandrake/base compssUsers* ;\
- upload Mandrake/base rpmsrate ;\
- upload Mandrake/base *_stage2.bz2 ;\
- upload Mandrake/share/advertising '' ;\
- upload misc gendistrib ;\
- upload misc make_mdkinst_stage2 ;\
- upload misc packdrake ;\
- upload misc packdrake.pm ;\
- upload misc rpmtools.pm ;\
- upload misc auto ;\
- upload '' live_update ;\
- upload images MD5SUM ;\
- upload images *.img* ;\
- upload images/alternatives '' ;\
- upload isolinux '' ;\
- echo
diff --git a/docs/.cvsignore b/docs/.cvsignore
deleted file mode 100644
index a0593a470..000000000
--- a/docs/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pictures
diff --git a/docs/BUGS b/docs/BUGS
deleted file mode 100644
index 1d154fcf1..000000000
--- a/docs/BUGS
+++ /dev/null
@@ -1,10 +0,0 @@
-doInstallStep: if there's not enough room, error, but packages are marked installed :(
-
-when you click directly on setupFilesystems and you have scsi, you're fucked.
-Even if you go to setupSCSI, you won't be able to have partitions again.
-
-bug non reproductible:
-- /etc/passwd is empty after `root passwd' stage :(
-- reboot at the end of package installation with a lot of error messages from
-gtk about the progressbar
-
diff --git a/docs/COPYING b/docs/COPYING
deleted file mode 100644
index 60549be51..000000000
--- a/docs/COPYING
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) 19yy <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) 19yy name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/docs/HACKING b/docs/HACKING
deleted file mode 100644
index a517839ba..000000000
--- a/docs/HACKING
+++ /dev/null
@@ -1,126 +0,0 @@
--=-=--
-DrakX is a very big project, and it needs special setups to work.
-The purpose of this file is to explain how you can setup your box to make it
-compile and run.
--=-=--
-
-Beware, don't try this on a production machine with important data.
-
-
---------------------------------------------------------------------------
-Sources installation:
-
- First grab the gi.tar.bz2 archive and untar it in your home directory,
-for example from DrakX-*.src.rpm on your Mandrake Linux distribution.
-
-cd to gi
-for i in `du -a | grep CVS/Root | cut -f 2`
-do
- sed -e 's/prigaux/anoncvs/' $i > $i.tmp
- mv $i.tmp $i
-done
-
-Then, log yourself into the cvs:
-% export CVS_RSH=ssh
-% export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-% cvs checkout gi
- (passwd: 'cvs')
-And update the gi package:
-cvs update -P -d
-
-
---------------------------------------------------------------------------
-Preparing the compilation process:
-
-(1) target directory
-
-create a /export directory and copy a recent Mandrake Linux CD in there.
-(You don't have to put have all the RPMS...) ; you'll need roughly 1.5
-Gbytes for a full install.
-
-[gc@obiwan ~/cvs/gi] su -c "mkdir /export"
-
-
-(2) devel packages
-
-you need quite a few devel packages to run the stuff; roughly: gcc, make,
-glibc-devel, perl-devel, XFree86-devel, libglib-devel, libgtk+-devel,
-perl-GTK, ldetect*, libslang-devel, libnewt-devel, e2fsprogs, dosfstools,
-rpm-devel, popt-devel, rpmtools, libbzip2*, libncurses*.
-
-you may need a few others I forgot to mention. if the compilation
-fails, try to understand the message and install any necessary
-remaining package.
-
-
-(3) sudo
-
-never build or run DrakX as root; install package sudo, and set up
-relevant permissions; the following should be enough: (in your
-/etc/sudoers)
-
-gc ALL=(root) NOPASSWD:/usr/bin/patch,NOPASSWD:/bin/rpm,NOPASSWD:/bin/mount,NOPASSWD:/bin/cp,NOPASSWD:/bin/umount,NOPASSWD:/usr/bin/install,NOPASSWD:/bin/rm,NOPASSWD:/bin/mv,NOPASSWD:/bin/tar,NOPASSWD:/bin/cpio,NOPASSWD:/bin/chown,NOPASSWD:/bin/mkdir,NOPASSWD:/usr/bin/strip
-
-
-(4) boot kernel
-
-you need one or more kernels and (all?) their modules. it's located in
-subdirectory "all.kernels" in DrakX-*.src.rpm ; if you ever grab (or
-build) another boot kernel, replace or add an entry in "all.kernels" as:
-
- (a) create your modules subdir (useful to describe the
- VERSION_RELEASE) and untar your kernel
-
-[gc@obiwan ~/cvs/gi/all.kernels] mkdir 2.4.1-BOOTcustom
-[gc@obiwan ~/cvs/gi/all.kernels] cd 2.4.1-BOOTcustom
-[gc@obiwan ~/cvs/gi/all.kernels/2.4.1-BOOTcustom] tar jxvf ~/mycustomkernel.tar.bz2
-[gc@obiwan ~/cvs/gi/all.kernels/2.4.1-BOOTcustom] ls
-boot/ cardmgr/ lib/
-
- (c) build kernel/modules stuff for stage1 and stage2
-[gc@obiwan ~/cvs/gi] ./update_kernel
-
-
-(5) pray
-
-[gc@obiwan ~/cvs/gi] make
-
-
----------------------------------------------------------------------------
-The comments written with #- are automatically stripped out at install.
-
-
----------------------------------------------------------------------------
-testing all:
-
- go to the perl-install directory and execute ./g_auto_install --test
-
- You should be able to test the whole thing in a non-destructive way.
-
-NEVER compile and/or execute DrakX as root!
-
-
-
-
-Here is how I (dams) made it work on my computer.
--------------------------------------------------
-
-- get the sources
-- install the librairies needed included newt-devel gtk+-devel popt-devel popt gtk-engines
-- cd path/to/gi
-- make
-- mkdir /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/themes /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/step-* /usr/share
-- ln -s path/to/gi/perl-install/share/help.xpm /usr/share
-- ln -s path/to/gi/perl-install/share/isdn* /etc/sysconfdir/network-scripts
-- have a cd architecture linked on /export
-- ln -s /export /tmp/rhimage
-- export PERL_INSTALL_TEST=1
-- cd path/to/gi/perl-install
-- gendistrib --noclean --distrib /export
-- ./install2 in root (dangerous) or chmod a+r /dev/hd* and ./install2 in user
-
-
-
-address all bugreports to dave@null.com
diff --git a/docs/README b/docs/README
deleted file mode 100644
index d35508e66..000000000
--- a/docs/README
+++ /dev/null
@@ -1,377 +0,0 @@
-Well here is a little description of what DrakX needs to work in comparison
-to the RH newt install.
-
-********************************************************************************
-* CVS **************************************************************************
-********************************************************************************
-Like all good free software, DrakX is in CVS :)
-
-You can access it at http://www.mandrakelinux.com/cgi-bin/cvsweb.cgi/gi
-
-or via
-
-export CVS_RSH=ssh
-export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-cvs checkout gi
- (enter password 'cvs')
-
-
-This is only read-only access. If you want more, tell me (pixel@mandrakesoft.com)
-
-Alas, all is not in CVS as a lot of things are binary files.
-
-For the boot kernel, see https://kenobi.mandrakesoft.com/~chmou/kernel/BOOT/
-or build your own:
-- install the kernel-*.src.rpm from
-- go to the /usr/src/RPM/SPECS/ (or any others topdir you have configured).
-- type rpm -ba --with BOOT kernel-2.4.spec.
-Then see function install_kernel() at the end of gi/update_kernel.
-
-For the other things, take SRPMS/DrakX-*.src.rpm
-
-Please note that redoing *all* the stuff is not for the faint of heart. I myself
-sometimes wonder what the whole make does :-%
-Instead, changing some .pm files is quite easy (nice interpreted language)
-
-********************************************************************************
-* Making your custom install ***************************************************
-********************************************************************************
-If you have your own rpms you want to add, or make your own updated cdrom, you
-just have to issue:
-
-% gendistrib --noclean --distrib <DIRS>
-
-Where <DIRS> is the root of all the media that the install will see, this first
-one is the main one :
-
-(1) network or 1-cdrom installs
- DIRS == the root directory of the Distribution
-
-(2) multi-cdrom install
- DIRS == the root directories of all the media that the install will see
-
-``gendistrib'' will scan the file Mandrake/base/hdlists in the main root
-directory (the first one in DIRS) to search for all media used. Typically you
-use Mandrake/RPMS* for RPM packages repository.
-For multi-cd, please use Mandrake/RPMS or Mandrake/RPMS1, Mandrake/RPMS2, etc.
-For one CD or a network/hd volume, please use Mandrake/RPMS.
-
-Optionnally, you can modify ``Mandrake/base/rpmsrate''; this file manages
-the relative importance of the files, and thus their installation or not.
-
-Also, mdkinst_stage2.gz must be remade if you modify files in Mandrake/mdkinst.
-See below for information about these files.
-
-********************************************************************************
-* FILES ************************************************************************
-********************************************************************************
-First here are the different things needed :
-
-Mandrake/base/hdlists
- description of the available install media.
- format is one line for one medium as
- <hdlist_name> <rpms_directory> <description>
- <hdlist_name> should be match regexp /hdlist\S*.cz2?/
- for example (two cd install) you get
- hdlist1.cz Mandrake/RPMS1 Boot CD
- hdlist2.cz Mandrake/RPMS2 Extension CD
-
-Mandrake/base/hdlist*.cz
- table of rpm's headers, referred by ``hdlists''
- their contents can be listed using ``packdrake -l <hdlist_file>'' or
- or ``parsehdlist <hdlist_file>''.
- ! Need to be remade when Mandrake/RPMS* changes (with ``gendistrib'') !
-
-Mandrake/base/depslist.ordered
- for each packages, tell which package it depends on. Also contains the
- size for some (obscure) bloody reasons.
- ! Need to be remade when Mandrake/RPMS* changes !
- (with ``gendistrib --noclean --distrib .'')
-
-Mandrake/base/compss
- obsoletes comps. It store packages in different categories, generated
- from the %{GROUP} field
- ! Need to be remade when Mandrake/RPMS* changes !
- (with ``gendistrib --noclean --distrib .'')
-
-Mandrake/base/rpmsrate
- ranks and classify packages, so that the installer will know which
- ones to install. format is :
- <intern_group>
- <level> <packages>
- where <intern_group> is a symbolic name used in Mandrake/base/compssUsers* files,
- and <level> defines importance level as described below :
- 5 must have
- 4 important
- 3 very nice
- 2 nice
- 1 maybe
- by default (for non expert), group selects packages for level 4 (important)
- and 5 (must have). export mode add 3 (very nice) level. other level (below 2)
- can only be selected using individual package selection.
-
-Mandrake/mdkinst
- live system used on certain installs. See ``Ramdisk or not'' below for
- more.
-
-Mandrake/base/mdkinst_stage2.bz2
- for the ramdisk. live sytem in ext2 filesystem bzipped2.
- generated from Mandrake/mdkinst tree using misc/make_mdkinst_stage2
- See ``Ramdisk or not'' below for more.
-
-Mandrake/base/rescue_stage2.bz2
- rescue ramdisk. live sytem in ext2 filesystem bzipped2.
- this is the ramdisk loaded when typing rescue on boot prompt.
- there is no live system available, only the ramdisk is used.
-
-images/*.img
- boot images to use with DrakX. Use:
- - cdrom for cdrom install
- - network for ftp/nfs install (non-pcmcia devices)
- - hd for hard-disk install
- - pcmcia for pcmcia install (see ``PCMCIA install'' below for more)
-
- the following modules have been removed from:
- network.img: acenic sk98lin de4x5
- cdrom.img and hd.img: BusLogic seagate fdomain g_NCR5380 dc395x_trm tmscsim
- hd.img: dpt_i2o eata eata_pio eata_dma
- cdrom.img: aztcd gscd isp16 mcd mcdx optcd cm206 sjcd
- pcmcia.img: apa1480_cb
- they are now in "other.img",
-
- blank.img is a blank boot image without a kernel nor initrd. this image
- can be used to generate custom boot disk.
-
- if you think one of those modules is used a lot, tell me, i may find some room
- to put it back on the main floppies.
-
-
-********************************************************************************
-* logs *************************************************************************
-********************************************************************************
-During install, a lot of interesting stuff can be found in different places:
-in consoles and in files. To switch to console 2 for example, do Ctrl-Alt-F2
-from the X install.
-- alt-F1: the stdout of the install. Not very interesting stuff
-- alt-F2: simple shell. Quite a lot of commands are available but as they are
-written in perl (for space), they do not handle the very same options as normal.
-After install, you can do ``chroot /mnt'' to see your system just like after
-rebooting. ``rpm -qa'' works for example.
-- alt-F3: a lot of interesting things. Be carefull, some ``ERROR'' messages are
-not interesting.
-- alt-F4: kernel's place. aka the output of dmesg.
-- alt-F7: the graphical install lives there
-
-- command "bug" puts on floppy lots of interesting stuff.
-- /tmp/stage1.log: same as alt-F3 part when stage1 run (e.g. actions
- before graphical install really begins)
-- /tmp/ddebug.log: (nearly the) same as latter alt-F3 part
-- /tmp/syslog: same as alt-F4
-- /mnt/root/drakx/ddebug.log: at the end of each step, DrakX tries to backup
- /tmp/ddebug.log to /mnt/root/drakx. Available only after mounting of /.
-- /mnt/root/drakx/install.log: the log of the installation (or upgrade) of the rpms
-(just like rpm's /mnt/tmp/(install|upgrade).log)
-- /mnt/root/drakx/auto_inst.cfg.pl: a kickstart file generated at the end of each
-step. Can be used in 2 ways: kickstart install or ``defcfg'' install. Hopefully
-you know about kickstart. ``defcfg'' is a way to customize the default values in
-install. For example, French can be the default language with a qwerty keyboard,
-the auto-partitionning partitions can be changed, the default user class can be
-set to developer (!)...
-
-********************************************************************************
-* po translation files *********************************************************
-********************************************************************************
-DrakX uses .po files for its translation. A script takes the different
-strings out of the .pm files. It generates the DrakX.pot file which contains
-all the english strings to translate.
-To add a new language, you just have to add it to lang.pm (if it's not there
-already) and put the .po in the perl-install/po directory (see ``Ramdisk or
-not'' to know if you have to regenerate the mdkinst_stage2.gz)
-
-********************************************************************************
-* PCMCIA install ***************************************************************
-********************************************************************************
-If the media you use to install is a pcmcia device, use the pcmcia boot disk.
-
-********************************************************************************
-* Ramdisk or not ***************************************************************
-********************************************************************************
-The DrakX install is much bigger than the newt one. So the ramdisk which was
-used is getting big, and costs a lot in memory
-(eg: the mdkinst_stage2 is 14MB - 23/09/99)
-(update! now size is 21MB - 24/01/01)
-(update! now size is 19MB - 26/04/01)
-
-| | newt | DrakX
-|-------+---------+----------------------------------------------------------
-| nfs | live | live
-| ftp | ramdisk | ramdisk
-| http | ramdisk | ramdisk
-| hd | ramdisk | live if Mandrake/mdkinst/usr/bin/runinstall2 is a link,
-| | | ramdisk otherwise
-| cdrom | ramdisk | live if memory < 52MB, ramdisk otherwise
-
-Where ramdisk is needed, if detected memory is below the limit allowed for
-ramdisk (maintained in file gi/mdk-stage1/config-stage1.h; currently 52 Mb),
-a failure dialog will be printed explaining that there is not enough memory
-to perform the installation.
-
-When i say live, it means that the stage1 will *mount* the
-Mandrake/mdkinst and use it that way.
-
-The ramdisk is used in place of the live in some cases. This ramdisk is filled
-with mdkinst_stage2.gz
-
-For cdrom install, the ramdisk is used to speed up things (access time is quite
-high on cdrom drives)
-
-For pcmcia, it depends on the type of install.
-
-
-********************************************************************************
-* modules **********************************************************************
-********************************************************************************
-Modules can be found in at least 2 places:
-- in /modules/modules.mar
-- in /lib/modules.cz<KERNEL_VERSION_RELEASE>
-
-/modules/modules.mar is used in mdk-stage1. It contains only modules
-interesting for one kind of install. For example in an hd install, it
-contains scsi modules. For a network install, it contains network card
-modules. (To create, extract or view files in a ``mar'' archive, please
-use gi/mdk-stage1/mar/mar; this is basically an archive format meant to
-be minimalistic)
-
-/lib/modules.cz<KERNEL_VERSION_RELEASE> contains all modules, it is used
-in stage2.
-
-
-To install a module, use modprobe which is in /usr/bin. It's a perl wrapper
-around /usr/bin/insmod. It uses the dependencies found in
-/modules/modules.dep (stage1).
-
-/usr/bin/insmod is a wrapper around /usr/bin/insmod_. It just extracts the
-module out of /lib/modules.cz in /tmp. Then it calls insmod_.
-
-/usr/bin/insmod_ is the real prog (which you usually find in /sbin/). You need
-to give it the complete path.
-
-********************************************************************************
-* Making screenshots ***********************************************************
-********************************************************************************
-1. easy solution: press "F2"!
-
-2. On a test machine, make a network install, switch to console (ctrl-alt-F2), enter:
-% xhost+
-then, on another computer:
-% DISPLAY=test_machine:0 xwd -root | convert - screenshot.png
-
-********************************************************************************
-* Miscellaneous ****************************************************************
-********************************************************************************
-> o Media access methods: nfs, ftp, http, hd, cdrom
-> o Stages: init, stage1, stage2
-> - What exactly each stage does
-
-init loads stage1
-stage1 loads stage2, on various medium type
-
-stage2 is too big to fit on a floppy, that's why stage1 exists
-
-> - How each stage relates to the various media access methods
-
-stage1 knows only how to access to the media is compiled for. It contains only
-the kernel modules needed for that media. For eg, the nfs/ftp/http stage1
-doesn't contain scsi modules nor ide.
-
-> - How one stage terminates and another begins. i.e., How does
-> stage1 find, mount, and launch stage2?
-
-/sbin/init just starts /sbin/stage1
-/sbin/stage1 takes care of mounting stage2 (in ramdisk if necessary)
- then it runs /usr/bin/runinstall2
-
-> o Text and Graphic mode installers
-> - Architectural overview of each
-
-have a look at gi/docs/object_class.fig
-
-
-********************************************************************************
-* OEM **************************************************************************
-********************************************************************************
-> I am a system OEM in Bangalore,India selling systems bundled with
-> Mandrake Linux. The problem is that with every system I sell, I need to
-> install & configure the system which takes HOURS!. Can I do a diskcopy
-> instead?
->
-> Please Help. This is a major bottleneck for me.
-
-many solutions:
-
-- make an install on drive hdb, then :
- dd if=/dev/hdb of=/dev/hdc
- but you should make sure the hardware is *REALLY* identical.
-
-- try the oem feature
- 3. - burn a cd out of *latest* cooker or 8.0 and above.
- - boot on it telling "oem" to syslinux
- !! it will destroy every data on the harddrive or
- resize (or use free space) if *ONLY* one fat partition is defined !!
- - you now have a very automated install matrix
- (duplicate it with "dd if=/dev/hdb of=/dev/hdc bs=1M count=730")
-
- put the harddrive in the oem box, the user will now have an *very* automated
- install, just asking the root password and user password, and some other
- question according its hardware.
-
- 4. just like 3. but you may have to mount /cdrom after typing rescue on
- syslinux prompt (oem script do it automatically if a automatic boot nfs
- network has been done as server is known). under /cdrom may be anything
- as long as it provides an installation tree of Mandrake Linux.
- after that run oem script by typing "/etc/oem -f" for normal installation
- or "/etc/oem -f server" for server installation (normal with server installed).
-
- 5. (just like 3. without burning a cd, doing the first part by hand)
- have a look at the /etc/oem script on the rescue and do it by hand...
-
-
-cu Pixel, fpons.
-
-
-comments:
-1. maybe copy unnecessary things -> take too long
- solution -> use bs=8k count=xxxx
-2. kernel_reread can be found on the new rescue, source is also at end of this
-mail. This solution works with one partition. Can be easily enhanced to many
-primary partitions... For extended partitions, more complicated, but not much :)
-3. has just been added in latest cooker. It may still have some pb. The main
-current limitation is IDE only, though it can be fixed easily for special cases.
-
---------------------------------------------------------------------------------
-#include <stdio.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-
-void die(char *msg)
-{
- perror(msg);
- exit(1);
-}
-
-void kernel_read(char *dev)
-{
- int fd;
- if ((fd = open(dev, O_RDONLY)) == -1) die("can't open device");
- ioctl(fd, BLKRRPART, 0);
- close(fd);
-}
-
-int main(int argc, char **argv)
-{
- if (argc != 2) {
- fprintf(stderr, "usage: kernel_read_part <hard drive device>\n");
- exit(1);
- }
- kernel_read(argv[1]);
-}
diff --git a/docs/README.devel b/docs/README.devel
deleted file mode 100644
index 0244557ba..000000000
--- a/docs/README.devel
+++ /dev/null
@@ -1,252 +0,0 @@
-Well here is a little description of how DrakX can be modified or extended.
-Please refer to README file for getting DrakX code source and to known more
-exactly how it works and what it can do.
-
-
-********************************************************************************
-* Execution of DrakX ***********************************************************
-********************************************************************************
-DrakX has originally be written by pixel in perl and C.
-entry point for stage2 is /usr/bin/runinstall2 which is typically a link to
-/usr/bin/install2 which simply load module install2.pm and execute
-install2::main with @ARGV.
-
-install2::main parse command line arguments, prepare installation, find the right
-install_interactive class (take a look at gi/docs/object_class.fig) according to
-command line, memory available and if the interactive chosen is initializing
-correctly, else it will try a less-demanding interactive object.
-Once done, $::o is set to this install & interactive object and main runs the
-various step of install2 defined in $o->{steps}, starting with $o->{steps}{first}
-and iterating with method install_any::getNextStep().
-while running step, it trap any errors that may arise and use perl exception to
-change step.
-
-********************************************************************************
-* DrakX modules descriptions ***************************************************
-********************************************************************************
-Here is a brief description of what each modules of DrakX is doing.
-
-install2: main module of DrakX as described above, main loop execution of DrakX.
-
-install_steps: generic installation module containing steps definition, all steps
- should always be defined here as some methods may be used on automatic mode.
- there is no interactivity available. typically are defined base operation for
- configuring each step according to $o.
-
-install_steps_interactive: generic installation module with generic interative
- methods. typically are found all interactive code of DrakX for each steps.
-
-install_steps_auto_install: implementation installation module without interactive
- methods to match auto_install mode. this is the simplest as almost no method are
- redefined (inherit module install_steps only, compared to other implementation
- modules described below).
-
-install_steps_stdio: implementation installation module with interactive stdio
- methods to match stdio mode. inherit modules install_steps_interactive and
- interactive_stdio.
-
-install_steps_newt: implementation installation module with interactive newt
- methods to match newt mode. inherit modules install_steps_interactive and
- interactive_newt.
-
-install_steps_gtk: implementation installation module with interactive gtk
- methods to match gtk mode. inherit modules install_steps_interactive and
- interactive_gtk.
-
-install_any: contains various methods using generic interactive interface but
- not used by standalone tools.
-
-install_gtk: contains various methods using gtk interface but not used by
- standalone tools.
-
-interactive_stdio: implementation methods for interactivity in stdio mode.
- inherit module interactive.
-
-interactive_newt: implementation methods for interactivity in newt mode.
- inherit module interactive.
-
-interactive_gtk: implementation methods for interactivity in gtk mode.
- inherit module interactive.
-
-my_gtk: basic gtk access methods.
-
-any: contains various methods using generic interactive interface. to compare
- against install_any module as this one is available for standalone tools.
-
-class_discard: simple module that implement every methods undefined to return
- nothing. this trick is used to ensure no undefined method can arise when using
- code that reference interactive method which are not defined.
-
-common: contains very simple and very usefull (common) methods to do various task.
- some methods inspired by functionnal language.
-
-c: contains wrapper to C definition of methods used by DrakX, use of C is necessary
- for C extern libraries interface (rpmlib, ldetect), kernel interface, XFree
- interface.
-
-commands: implement some un*x commands, conflicting name with perl contains
- trailing underscore (_). this module is used by commands perl script that
- determine which command to run according to $0 (this is used this way when DrakX
- is running).
-
-run_program: allow running a program with redirection but without using a shell.
- allow rooted execution.
-
-help: contains all help message displayed by DrakX.
-
-log: log facility methods.
-
-lang: language manipulation methods, get and set sysconfig file, load po.
-
-keyboard: keyboard manipulation methods, get and set sysconfig file, set console
- keyboard mapping.
-
-mouse: mouse manipulation methods, get and set sysconfig file, change mouse.
-
-timezone: time zone manipulation methods, get and set timezone.
-
-services: services manipulation methods, activate or delete services (see
- /etc/rc.d/init.d directories).
-
-detect_devices: manage detection of various class of hardware.
-
-devices: manage device file, create device special according device name.
-
-partition_table: base partition table management methods, it manages
- appriopriate partition_table_XXX object according to what has been read
- as XXX partition table type.
-
-partition_table_raw: generic class for the following partition_table_XXX.
-
-partition_table_emtpy: matches an empty partition table.
-
-partition_table_dos: matches a DOS partition table.
-
-partition_table_bsd: matches a BSD partition table.
-
-partition_table_mac: matches an Apple partition table.
-
-partition_table_sun: matches a Sun Label partition table.
-
-fs: read and write /etc/fstab file, mount and umount, format.
-
-fsedit: manage (modyfy, edit) mount point associated to partition (like editing
- /etc/fstab).
-
-swap: swap management methods, format and mount (activation).
-
-raid: raid (software only) management methods.
-
-lvm: lvm (Logical Volume Manager) management methods.
-
-loopback: loopback management methods, used for lnx4win type installation or using
- a file as a partition.
-
-diskdrake: diskdrake itself, disk graphical (using gtk) manipulation tools.
-
-ftp: ftp mangement methods, used when using ftp install.
-
-http: http management methods, used when using http install.
-
-modparm: kernel modules options management, allow building nice dialog with each
- module parameter available.
-
-modules: kernel modules management, allow loading or unloading (ala modprobe or
- insmod).
-
-printer: printer management methods, read and write both LPR or CUPS configuration.
-
-printerdrake: interactive printer management methods.
-
-network: network management methods, get and set sysconfig file.
-
-netconnect: network configuration wizard.
-
-netconnect_const: network configuration wirard data.
-
-Xconfig: X configuration (monitor + already existing config file) management.
-
-Xconfigurator: X configuration wizard.
-
-Xconfigurator_const: X configuration wizard data.
-
-booloader: bootloader (LILO, GRUB, LOADLIN, SILO) configuration management methods.
-
-pkgs: rpm package and hdlist, depslist management methods, allow selecting or
- unselecting packages, manage rpmsrate file and select group, installation and
- removal methods of rpm file.
-
-crypto: *obsoleted* module to manage crypto site and rpm file.
-
-standalone: standalone only, allow defining a standalone tools.
-
-bootlook: standalone only, interface with DrakConf to configure bootloader options.
-
-tinyfirewall: standalone only, interface with DrakConf to configure a tiny firewall.
-
-********************************************************************************
-* DrakX FAT resizer module description *****************************************
-********************************************************************************
-here is a fat resizer written in perl and C used by DrakX (diskdrake) to resize
-FAT16/FAT32 partition. it moves clusters to make sure a shrink can be done on the
-limit of the partition itself, if no cluster need to be moved, only boot sector
-partition limit are modified.
-
-any: various methods to flag cluster, compute min size.
-
-boot_sector: boot sector management methods.
-
-c_rewritten: originally resize_fat was only perl, this contains code section that
- are the most sensible to speed or memory contraints and have been rewritten to C
- using perl extension.
-
-dir_entry: manage directory structure.
-
-directory: traverse directory recursively, needed to move correctly cluster.
-
-fat: manage fat structure.
-
-info_sector: manage info sector.
-
-io: manage I/O on disk (need to take care of big file as partition size may be
- larger than 2GB).
-
-main: main resizer algortihm. if needed allocate new clusters, copy files, copy
- directories. update boot sector info.
-
-********************************************************************************
-* Adding a new step to DrakX ***************************************************
-********************************************************************************
-Say we want to add a question for setting "alawindows" option.
-We put it pretty early in the install, let's say after "Select Installation
-Class".
-
-1. in install2.pm
-
-add
-
- selectAlawindows => [ __("A la windows or not"), 0, 1, '' ],
-
-after
-
- selectInstallClass => [ __("Select installation class"), 1, 1, '' ],
-
-the 0, 1, '' means not "redoable", "skip on error", "don't hide"
-
-2. add your function selectAlawindows in install2.pm
-
-sub selectAlawindows { $o->selectAlawindows }
-
-3. add your function selectAlawindows in install_steps_interactive.pm
-
-sub selectAlawindows {
- my ($o) = @_;
- $o->{alawindows} = $o->ask_yesorno('', _("Throw everything away as windobe does?"), 1);
-}
-
-4. add your function selectAlawindows in install_steps.pm (not needed in that
-case, except for auto_install)
-
-sub selectAlawindows {}
-
-
diff --git a/docs/README.pxe b/docs/README.pxe
deleted file mode 100644
index 2ddd205fe..000000000
--- a/docs/README.pxe
+++ /dev/null
@@ -1,133 +0,0 @@
-Here is a short description to configure a PXE server using dhcpd and tftpd.
-This allows a network boot for your ethernet card conforming to the Interl
-PXE specification.
-
-********************************************************************************
-********** General overview ************
-********************************************************************************
-
-You need a dhcp server and a tftp server on one or two machines to allow the
-network boot. We are not using a PXE server to achieve this as it is not
-mandatory.
-You can install tftp-server and dhcp-server package from the Mandrake
-distribution for example.
-
-On the server machine at 192.168.2.1, you will find a "/etc/dhcpd.conf" sample
-file written by Florin Grad <florin@mandrakesoft.com>, where "mydomain.com" is
-assumed to be your domain name, and 192.168.1.1 a name server. All install are
-done on subnet 192.168.2.0.
-
-All the files that will be downloaded by the tftp daemon are located under
-"/tftpboot" :
- "/tftpboot/pxelinux.0" is a program that is loaded directly by the machine
- where a network boot will be done, this program comes
- from the SYSLINUX package by H. Peter Anvin. (look at
- http://syslinux.zytor.com/pxe.php for more information)
- "/tftpboot/pxelinux.cfg/" is a directory where all configuration file for
- pxelinux.0 will be found, pxelinux.0 will download
- these file by itself. It searches first for a file
- named accordind to the machine IP address in
- hexadecimal, for example for 192.168.2.20, it
- looks for "C0A80214" first, then "C0A8021" and so
- on down to "C0", "C" and "default".
- "/tftpboot/network.rdz" is the standard network initrd for Mandrake installation.
- "/tftpboot/vmlinuz" is the boot kernel for installation.
- "/tftpboot/help.msg" is the message displayed by pxelinux.0, note that currently
- graphical message (as for install using SYSLINUX 1.48 with
- graphic patch by Mandrake) is not supported.
-
-All file "network.rdz", "vmlinuz", "help.msg" can be found by mounting "network.img",
-or the network floppy disk used for install, "pxelinux.cfg" is just an adaptation
-of the file found on the "network.img" called "syslinux.cfg" but without the reference
-to boot.msg (as it is not currently supported).
-
-Update network configuration for your needs and start dhcp server on the machine and
-tftp server and this should work.
-
-********************************************************************************
-* /etc/dhcpd.conf **************************************************************
-********************************************************************************
-ddns-update-style ad-hoc;
-
-authoritative;
-
-option space PXE;
-option PXE.mtftp-ip code 1 = ip-address;
-option PXE.mtftp-cport code 2 = unsigned integer 16;
-option PXE.mtftp-sport code 3 = unsigned integer 16;
-option PXE.mtftp-tmout code 4 = unsigned integer 8;
-option PXE.mtftp-delay code 5 = unsigned integer 8;
-option PXE.discovery-control code 6 = unsigned integer 8;
-option PXE.discovery-mcast-addr code 7 = ip-address;
-
-default-lease-time 28800;
-max-lease-time 86400;
-
-option domain-name "mydomain.com";
-option domain-name-servers 192.168.1.1;
-
-class "PXE" {
- match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
- option vendor-class-identifier "PXEClient";
-
- vendor-option-space PXE;
- option PXE.mtftp-ip 0.0.0.0;
- next-server 192.168.2.1; #tftp server location
-
- filename "pxelinux.0"; # standard TFTP
-
-}
-
-shared-network "mynetwork" {
- subnet 192.168.2.0 netmask 255.255.255.0 {
- option subnet-mask 255.255.255.0;
- option routers 192.168.2.1;
-
- ddns-domainname = "mydomain.com";
-
- pool {
- range 192.168.2.10 192.168.2.20;
- allow members of "PXE";
- }
- }
-}
-********************************************************************************
-* /tftpboot/pxelinux.cfg/default ***********************************************
-********************************************************************************
-default linux
-prompt 1
-timeout 72
-display help.msg
-label linux
- kernel vmlinuz
- append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 vga=788
-label vgalo
- kernel vmlinuz
- append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 vga=785
-label vgahi
- kernel vmlinuz
- append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 vga=791
-label vga16
- kernel vmlinuz
- append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 vga16
-label text
- kernel vmlinuz
- append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 text
-label patch
- kernel vmlinuz
- append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 patch vga=788
-label expert
- kernel vmlinuz
- append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 expert vga=788
-label rescue
- kernel vmlinuz
- append ramdisk_size=32000 initrd=network.rdz root=/dev/ram3 rescue rw
-label oem
- kernel vmlinuz
- append ramdisk_size=32000 initrd=network.rdz automatic=method:cdrom root=/dev/ram3 rescue oem rw
-********************************************************************************
-* Usefull linkst ***************************************************************
-********************************************************************************
-
-http://syslinux.zytor.com/pxe.php
-http://www.kano.org.uk/projects/pxe/
diff --git a/docs/SHORTCUTS b/docs/SHORTCUTS
deleted file mode 100644
index 93a7133db..000000000
--- a/docs/SHORTCUTS
+++ /dev/null
@@ -1,51 +0,0 @@
-********************************************************************************
-main shortcuts
-
-F1 -> help
-F2 -> take a screenshot
-F11 -> previous step
-F12 -> next (reachable) step
-
-********************************************************************************
-diskdrake
-
-taken directly from diskdrake.pm:
-
- "a" => \&Active,
- "b" => \&Move,
- "c" => \&Create,
- "d" => \&Delete,
- "f" => \&Format,
- "m" => \&Mount_point,
- "M" => \&Mount,
- "n" => \&Create,
- "o" => \&ReadFromFile,
- "s" => \&SaveInFile,
- "q" => \&Exit,
- "r" => \&Resize,
- "t" => \&Type,
- "u" => \&Unmount,
- "w" => \&WritePartitions,
- "W" => \&WriteFstab,
-
-hopefully it is explicit enough :)
-
-********************************************************************************
-list choice
-
-- acceleration a la windows (default): enter a letter and the selection will move to the
-first entry beginning with that letter. If you enter another letter it will try
-to find the entry beginning with the 2 letters you have given. In case it fails
-the starting_word is reset.
-- incremental search a la emacs: searches trough the list
-
-Use control-s to use incremental search and then to search next occurence
-
-********************************************************************************
-in case of complete mouse sh**t
-
-XFree86 provides a way of moving the mouse pointer:
-- first, press Ctrl-Shift-NumLock
-- then move the pointer with the keypad arrows
-- press button is ``0'' (aka Inser)
-- release button is ``.'' (aka Suppr)
diff --git a/docs/TODO b/docs/TODO
deleted file mode 100644
index cb9399f82..000000000
--- a/docs/TODO
+++ /dev/null
@@ -1,515 +0,0 @@
--URGENT---------------------------------------------------------------------------------
-check for fpons/pixel BOTH that resize_fat is clean for current version
-relative to 7.0-2.
-
-heavy testing of diskdrake to avoid corrupting partition table, current version
-should be available to fix bogus partition table, writing enabled only when
-partition is Ok (fixme? allow primary partition inside extended one, but with
-warning on diskdrake startup, made them as warning ?).
-
--features-------------------------------------------------------------------------------
-add rpmdrake in menu
-
-(7.1 or later) clean SCSI CDROM autoboot.
-(done,gc,8.0) stage1 & cdrom: add ability in expert to choose the scsi cdrom drive to use
-
-(7.1)better help for partitioning in newbie
-
-(7.1)Improved network configuration (PPP and/or Ethernet)
-PPPoE install and configuration (SuSE includes it, DHCP-like)
-(7.1)standalone applications for configuration (netdrake, timetool, authentificationconf, soundcard)
-
-----
-(7.2) replace normal with standard (in the installClass's)
-
-(7.2 or later)horizontal sub-steps
-
-(7.2 or later)diskdrake in text mode
-
-ask "do you have SCSI?" before asking "probe PCI or not"
-
-(?) paride in stage1
-(done,gc,8.0) stage1 & network: add ability to choose the network interface to use
-
-(?) msec custom
-
-(?)firewall configuration (instant firewalling?)
-
-(?)widget for displaying fdisk (dindinx)
-add fdisk using the zvt widget (taken in gnome-libs)
-
-(?)help in some configuration files.
-
-ability to add nfs/weird_fs entries in fstab
-
-size of packages in crypto
-
--to test--------------------------------------------------------------------------------
-what's lseek64?
-
-ensure installClass is set to something in auto install.
-
-for axp, swriteboot -f1 if swriteboot failed.
-axp with swap part sigsegv
-
-tree for choosing monitors (buggy?)
-
-what happens if a module fails to insmod (scsi step), in beginner/normal/expert
-
-fstab must be sorted (/usr/local after /usr)
-
-RAID upgrades
-
-add choice clean /tmp or not in expert
-
-kernel chosen by default must be the one according to supermount/secure
-
-bug if ide-scsi, no more hdX, but scd0 (aka sr0)
- (and add alias block-major-11 ide-scsi ?)
-
-check on update for conf.modules and modules.conf !
-
-with /usr, /usr/local and /usr/local/e mount points i get an error at step mounting local filesystems
-
--easy fixes-----------------------------------------------------------------------------
-rpmdrake proposition for cdrom labels
-
-use option nocheck to mount for upgrades
-
--fixes needing thinking-----------------------------------------------------------------
-bug: changing mem= in miscellaneous doesn't modify lilo conf if you backtrack
-
-ask network configuration only if NIC found?
-
-configure DHCP for newbies if ethernet & DHCP card available
-
-xvidtune like screen configuration (see SuSE's yast)
-
-live cdrom for alpha (sparc?)
-
-network boot
-
-get the error when getting/reading .rpm files fail
-better timeout handling for network installs
-
-handle not enough room for update
-(fpons)verify the free space is big enough.
-
-the XFdrake test does not handle the fontset
-
-> Here I go into the printer configuration select 'HP Deskjet 722C Colour',
-> print a test ASCII page, pressing 'No' when prompted to indicate the page did
-> not print OK and then hitting cancel when prompted to choose a printer type
-> again.
-> ask_from_list cancel at /usr/lib/libDrakX/my_gtk.pm line 504.
-
-diskdrake: take from parted mklabel, hide(?)
-
-bug in kde desktop if keeps home but not an upgrade
-
-bug in users: mandrake user is added twice in strange installs
-(mixed of security 0 + ???)
-
-bugs rpmdrake:
-- just after installing a package, switch to `Installed', the package has wrong name
-- refresh the kde desktop after package installation in rpmdrake
-(restart kpanel)
-- rpmdrake and same name packages
-
-urpmi: pb if XXX-devel requires XXX = 1.2.3 and we updgrade XXX-1.2.3
-
-bug in defcfg in with lang=fr_FR, display is buggy
-
-bug keyboard focus: after switch in console at Xconfig step
-
-
-
--to look at--------------------------------------------------------------------------
-adduserdrake to remove/update users
-
-(???)free provider auto configuration facility (to be discussed).
-auto ppp-configure with free provider
-
-(?)on laptop, configure the MMU to use swap not very often
-
-(?)checkboxes in groups based on compssList (and availableSpace?)
-
-(?)see what can be done with nvram (50 bytes to save information)
-
-better wacom support
-
-(fpons)bug: CANON BJC 4X00 do not work with current rhs-printfilters
- (work with magicfilters (debian))
- (should be handled by ghostscript BJC600's driver)
-
-(pix)install text on mem=8M, mem=16M?
-
-(pix)kickstart
-partitioning? raid?
-X configuration and bootloader in kickstart
-
-XFdrake chooseResolutions with ask_from_list do not permit ``Show all''
-
-(?) options in mkfs, progress bar when formatting
-
-(?) when some error occurs, partition must be unset isFormatted
-
--hardware-------------------------------------------------------------------------------
-- with no floppy drive, mkbootdisk step fails badly
-- with bad floppy or write protected, mkbootdisk doesn't say anything
-- try detect_devices::floppies (and how are scsi floppies handled?)
-maybe: do a iotcl FDGETPRM to detect fd1, fd0.
-
-need a simple solution to precise mouse type (syslinux option?)
-
-ELSA Gloria has bad ddc info
-
-token ring is tr0 not eth0
-
-I have Mandrake 6.1 installed and working on a ThinkPad 770.
-To enable the PCMCIA Token ring I have to append the following line to
-/etc/pcmcia/config.opts
-module "ibmtr_cs" opts "mmiobase=0xd2000 srambase=0xd4000"
-
-smp not detected (mhoward@memphisonline.com on cooker, bios=BP6PW)
-
-UDMA66 (ultra66.o for promise)
-
-aha152x needs "insmod aha152x.o aha152x=0x140,11,7"
-
-(obsolete) usb module not removed if no mouse found
-
-(fpons)handle dat drives
-
-hibernation on laptop -> clock not restored
-
-# in 2.3.15 "Silicon Integrated Systems [SiS]|SiS900 10/100 Ethernet" is handled
-
-(?)enable the testing of the mouse type (under X) (wheel)
-possibility to specify the mouse
-
--(?)---------------------------------------------------------------------------------
-(?) handle NT (add entry for it in lilo, put it in fstab)
-
-(?) lilo-0.22-19mdk is buggy with boot=/dev/hde & root=/dev/sda13, it needs
-disk=/dev/hde bios=0x80 & disk=/dev/sda bios=0x81
-
-(?)using setxkb, enable the testing of the keyboard
-
-(?)XFdrake does not handle fbdev
-
-(?) Je viens de faire une installation sur une machine oů seul Be était
-installé. Je l'ai supprimé et installé (mode recommandé) Oxygen. Au
-redémarrage, le boot manager de Be apparaît et il est impossible de
-démarrer Linux.
-Pourquoi ne pas installer LILO si on supprime toutes les partitions ?
-
-(?)initrd in bzip2
-
-(?)smaller zsh (or ash in initrd)
-
-(?)is configureNetworkNet needed with dhcp/bootp?
-
-(?)bug in upgrade: install from hda1:/usr/local/blah with hda1:/
-
-(?)mandrake_desk was not installed while kdebase it there on upgrade
-
-(?)when clicking on X configuration, installation of packages is not displayed
-
-(?)maybe remove commented lines in /usr/lib/perl5/... files
-
-(?)timezone using a picture (pb: how to delimit zones)
-when asking GMT or not, display the time for each possibility
-the list is too big for USA
-
-(?)ability to select the type of install when booting of cdrom
-(?)use the ability of el torito to handle 2.88MB or more
-
-(obsolete)lilo-deinstallation in case of lilo auto-installation for beginners
-
-(?)loadFont sucks
-
-(obsolete)trash on the screen when X first starts
-
-(?)remove the gray line surrounding the logo
-
-(?)cleanup /etc/services & /etc/protocols
-
-(?)strange: no scsi of type 'fd', only 'tape'
-
-(?)remount ro before X test.
-
-(?)remove every << and >> (doesn't handle > 32bits)
-
-
--done---------------------------------------------------------------------------------
-(7.1,done,fpons) improve printerdrake to at least have the same functionalities as printtool.
-
-(done,fpons)diskdrake can olverlap partitions (resize lower, resize original typically
-after clear all and auto allocate, try maximal size available).
-
-(done,fpons)rewrite mouseconfig in perl?
-
-(done,pix)kudzu or not in miscellaneous
-
-(done,pix)warn the user if not enough ram to fulfill install
-
-(done,fpons)test after printer config
-
-(done,pix)ask for more than the memory size detected
-
-(done,fpons)modem config
-
-(done,pix)call kudzu in batch to initialize its list
-
-(done,pix)standalone generator of mdkinst_stage2.gz
-
-(done,pix)text install
-
-(done,pix) if u choose mouse usb != found mouse, it fails at X config
-
-(done,pix) diskdrake bug: saved information on floppy contains isMounted.
-
-(done,pix) update devices.c from modules.pm
-
-(done,pix) in lilo.conf, put
-disk=/dev/hdb
- bios=0x80
-
-(done,pix) diskdrake
-auto_partitions
-suggested partition tables must be better foreach installClass
-
-(done,pix) update the list of modules (in update_kernel)
-
-(done,pix) language support: only choose the right locales and upmark the packages requiring it
-
-(done,pix) move security question before isntallation of packages
-
-(done,pix) install ssh
-
-(done,fpons,pix) change the boot message of syslinux (have something different from RedHat)
-
-(done,pix) install_steps.pm: 569 (128M + 3)
-
-(done,pix) bug: mouse freeze just before network configuration (mouse primax)
- (was kudzu)
-
-(done,pix) signal 11 in stage1 nfs kickstart mount failed
-
-(done,pix) ask supermount or not, no supermount with kernel-secure
-
-(done,pix) fix bug in g_auto_install (can't go through all)
-
-(done,pix) bug: install from ciril.fr fails
-
-(done,pix)wizard for partitioning in case of one full vfat
-
-(done,dindinx)app for choosing drakxtools (drakxconf)
-(done,pix)verify being root
-(done,pix)log::l -> initlog
-
-(done,pix)install apmd for laptops (maybe not start apmd though)
-(done,pix)icewm apm (sh icewm_apm)
-(done,pix)kde apm (put Kapm.kdelnk in ~/Desktop/Autostart)
-
-(done,pix)bug in adduserdrake: missing pwconv in md5
-(done,pix)correct the default value of draksec (cp draksec)
-(done,pix)in draksec, (and maybe others) have --expert as default if /etc/sysconfig/system has TYPE=expert
-
-(done,pix)bug in XFdrake in install, cancel in choose Card do not close the window
-
-(done,pix)in XFdrake, testing should not overwrite /etc/X11/XF86Config
-
-(done,pix) hwiz and supermount and eject :(
-
-(done(replaced by msec's),pix) bug: usermod -G urpmi a not done (full install)
-
-(done,pix)perl and .ph's
-
-(done,pix) BUG bootp in network install sigsegv
-
-(done,pix) move the last done stuff before Xconfiguration if possible
-
-(done,pix)draksec is buggy, don't try security >= 4
-
-(done,pix)install apmd on laptops?? (maybe ask emcweb@btinernet.com (see alix))
-
-(done,pix)missing alias ll for root
-
-(done,pix)urpmi.addmedia: |gzip instead of doing it afterwards
-
-(done,pix)locale (and fonts?) buggy in case ramdisk is used
-
-(done,pix)rpmdrake: Installed packages not in hdlist should be there
-
-(done)in ftp install, locale not installed properly
-
-(done,pix)pcmcia.img does not handle hd/cdrom
-
-(done,pix)cyrillic font buggy in DrakX
-
-(done,fred)remove xfs user from kdm
-
-(done,pix)bug with 2 cdrom drives (.kdelnk to there for 1st drive)
-
-(done,pix(works))test ramdisk stage2 and romanian
-
-(done,pix)kfmrc
-
-(done,pix)on laptop, default to 1024x768
-
-(done,pix)mkinitrd and deps
-
-(done,fred(removed the call))XFdrake and mousedrake freeze if lothar launches them
-
-(done,pix)crypto message
-
-(done,pix)test bug with lilo and windows (if not on mbr)
-
-(done,pix)removed icons come back later (kde desktop)
-
-(done,pix(was bug in upgrade reading old config))
- segfault in linuxconf (adapter 1 empty)
- (test with the sysconfig sent)
-
-(done,fpons)bug: Lrosqu'on effectue une mise ŕ jour et que /etc/lilo.conf
-contient la variable Ť default ť positionnée sur autre chose que
-Ť linux ť ou Ť windows ť, DrakX est incapable de générer LILO.
-
-(done,fpons)bug: GeForce and hd.img?
-
-(done,fpons)for upgrade in expert, give choice of packages to install
- choosing packages available in upgrade?
-
-(done,pix)rpmdrake: pb uninstalling package with dependencies (rpmdrake is killed?!) (as root too)
-
-(done,pix)noatime option for ext2 fs on laptops (do not wake up the hd)
- Do not update inode access times on this
- file system (e.g, for faster access on the
- news spool to speed up news servers).
-
-(done,pix)kde's icons: 28 horiz and 25 vert grid for big icons
-
-(done,pix)bug: DrakConf don't follow the charset -> add setlocale(LC_ALL, "")
-(done,pix)for ko|ja|zh, gnome-terminal should point to rxvt (-CLE)
-(done,pix)group cdrom in /etc/group (gid=22)
-(done,pix)drakxtools should require urpmi
-(done,pix)bug: gdm unset LANG
-(done,pix) zip with automount -> ppa not autoloaded
-(done,pix)when you set the kde icons to Large, maybe it'd be good to chown the .kderc
-(done,pix)lilo in russian/japaneese is horrible
-(ok,pix)test ide burners
-(ok)test check bad blocks optional for mke2fs
-(done,pix)hd install: no umount is done at the end of install :(
-
-just before release:
-(done,pix)- mandrake_doc-xx, the symlink is no good in /usr/doc/mandrake as
-(done,pix)- crypto dependencies to update
-(done,pix)- update kudzu's pcitable
-(done,pix)- update pcitable for 86C368 if 3.3.6 (and other S3 3D's)
- ("ATI|3D Rage P/M Mobility AGP 2x" -> changed to Server:Mach64)
-
-(done,pix)with 2MB of video ram, chooses 8bpp instead of 16bpp
-
-(done,pix) replace
- { device => "loop7", type => 0x83, size => ((cat_('/dos/lnx4win/size.txt'))[0]*2048), mntpoint => "/", isFormatted => 1, isMounted => 1 },
-by
- { device => "loop7", type => 0x83, size => cat_('/dos/lnx4win/size.txt') * 2048, mntpoint => "/", isFormatted => 1, isMounted => 1 },
-
-(done,fpons)in ftp install, bug with X server install with wu-ftpd 2.6 (see http://www.wu-ftpd.org/broken-clients.html)
-
-(done,pix)ask package installation languages (must be put in RPM_INSTALL_LANG)
-
-(done,pix)bug (by dadou): Si la partition racine est trop petite pour installer le systčme, un
-message d'erreur apparaît pour signaler le problčme (bien) mais on ne
-peut en sortir. La seule solution est de redémarrer.
-
-(obsolete)bug when selecting compssUsers, do not deselect after (if u deselect)
-
-(done,pix)detect ide burners and then add hdX=ide-scsi to kernel cmdline
-
-(done,pix)urpmi: handle many args on cmd-line
-
-(done,pix)fix any // in path to ftp server otherwise windobe server bug :(
-
-(done,pix)diskdrake and auto partitioning, may have the last creation of partition rejected,
-try to figure why?
-
-(done,pix)in chooseResolutions: display the graphic card found
-
-(done,pix)with pcmcia, need ONBOOT=no
-
-(fpons,done) XFree: handle by card options
-eg: SIS6326 needs "no_bitblt" "no_bltimage" and 24bpp instead of 32bpp
-
-(done,pix) Xconfiguration: if "can't open fixed font", relaunch xfs.
-
-(obsolete) pb with dependencies ``missing'': icewm do not require XFree86 and so you can have icewm but no X server
-
-(obsolete) bug in ext2resizing (no sparse superbloc, don't finish properly)
-
-(done,pix,7.1)manage a lot of language (ergonomic issue as it already exists)
-
-(done,pix,7.1)tree for choosing things like timezone, monitors, graphic cards, modules, mice, keyboard? ...
-
-(done,pix,7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?)
-
-(done,pix,7.1)partitioning, keyboard shortcut.
-
-(done,fpons,7.1)index/compress hdlist? (for multi-cd)
-! for multi-cd live is mandatory, small transaction are mandatory too.
-
-(done,pix,7.1?)loopback partitions (even root one)
-
-(done,pix)in ok_cancel, focus has 3 states, should be 2 (ask dindinx)
-
-(done,pix,7.1)Generally improved package selection /ergonmic issue.
-Tree -> CTree, ``all'' branch with all packages
-show the value associated (100->a must, 90->great, 80->nice, ... 10->useless, 0->do not install)
-
-(done,pix)let diskdrake have dos/win partition automatically set up with mount point,
-this will help loopback too.
-
-(done,pix,7.1)grub
-
-(done,pix,7.1)feature missing: cancel installation
-
-(obsolete) bug in diskdrake: can in strange cases create a primary partition at sector #0
-
-(done,pix(partly, protection against bugging))bug in diskdrake:
-in expert: blank, create hda5 at beginning, create hda6 at the end, create hda7
-in the middle, remove the first one. Result hda5 at the end and bug.
-
-(obsolete) have a better time estimation of the remaining time in install packages
-
-(done,dindinx+pix)ask_many_from_list can't keyboard scroll
-
-(done,pix,7.1)individual package selection: double click is tiring...
-
-(done,fpons,7.1) sparc ehancement, avoid V7+ machine target (div and mul not in v7 standard)
-
-(done,fpons,7.1)syslinux in graphical mode to be improved for heavily bogus BIOSes.
-
-(done,pix)missing feature in lilo configuration: can't give hda2 with /boot/vmlinuz if
-already hda1 with /boot/vmlinuz
-
-(done,pix)in 640x480 install box is to small (cuz of 'Cancel' button beeing added)
-
-(done,pix)chooseGroup with individual alone
-
-(done)(7.1) rewrite crypto stuff
-(done)crypto: add a cancel & progress bar while downloading
-(done)error handling (like reading hdlist)
-(done)(7.1)progression bar on crypto.
-
-(done, daouda&pix,7.1, other persons)rescue:
-- small modification for stage1 to get the rescue stage2
-- create a stage2 with many tools (fdisk, bash...)
-the rescue could be on another cd (if multi-cd)
-! care must be taken about modules (if ide is in module...)
-
-(done,7.1)install in 800x600
-- need handling of both 640x480 (mostly for VGA16) and 800x600
-
-(done,NEED 7.1) auto-install for corporate, very important (need consolidation).
diff --git a/docs/advocacy b/docs/advocacy
deleted file mode 100644
index 9e7f00b6b..000000000
--- a/docs/advocacy
+++ /dev/null
@@ -1,87 +0,0 @@
-a little DrakX history:
-
-june 1999:
- i start rewriting redhat's install in perl, partly for the fun of it. I'm
- still working for the army
-
-5 july 1999:
- i start full time job at mandrakesoft. But we don't have many computers and i
- must share the accounting computer with Merieme who is working half-time. No
- test machine (i test on others box, and destroyed Jacques partitions once),
- guess how it slows things down?
-
-august 1999:
- at last computers, even test one
- first DrakX version which can install things, very very rough
-
-september 1999:
- a friend of mine help me 2 weeks on DrakX relayed by Francois
-
-november 1999:
- first released version of DrakX (goldpack). Not really stable yet.
-
-january 2000:
- 7.0 is out, with a DrakX quite stable
-
-july 2000:
- dams starts working on draknet
-
-mid-october -> mid-january 2000:
- gc rewrites the stage1 to win every kb we can
- -> size divided by 7 (!) for cdrom
-
-
-The DrakX team is also doing a lot of other things:
-- drakxtools
-- urpmi, early MandrakeUpdate, early rpmdrake...
-- Mandrake Control Center (new DrakConf)
-- packages maintenance/enhancing (esp. ghostscript, 3D-wrappers, lilo)
-- fixing core packages to make them installable
-- scoring packages, sorting them, flagging them... (compssList, rpmsrate)
-- reading/answering cooker and other MLs
-- helping non-perl gurus :)
-
-That doesn't give much. Me being the one more working on plain DrakX. It gives 2
-people working for 1.5 years. IMO it isn't ``spending an enormous amount of
-resources''.
-And what do you mean by ``compared to the code base size''??? DrakX is currently
-around 28K lines, which is big IMO. You can compare it with linuxconf which is
-170K lines. I think the achievement of DrakX is comparable (a 6 times code size
-win from dumb C++ to expressive perl is normal imo).
-
-
-Also it seems like we don't have the same understanding of the word
-"maintenance".
-DrakX functionalities have evolved *a lot* since the beginning:
-
-- hardware detection, configuration, debugging, work-arounding (multi-kernel installs...)
-- making things prettier
- - more bitmaps
- - "advanced" button
- - syslinux graphical boot
-- making it work with latest versions of software (eg: switching to rpm4)
-- finding out the best way to use rpmlib
-- multi-cd
-- draknet: configuring every piece of stupid protocols
-- diskdrake: raid, loopback, LVM, resizing, checking stupid users entry
-- XFdrake: multi-mice, multi-heads, 3D-accel
-- porting to axp/sparc/ppc (with Stew's help)
-- always more i18n
-- keeping things small
- - .cz format
- - moving to .png
- - getFile on demand from mdkinst for ramdisk installs
-
-[...]
-
-> You don't believe the books ? Count yourself; see the man/months spent
-> in 'pure' developoment in drakX, and the resources put in mantainance
-> of the code base; as far as i know, your count should confirm what the
-> books says; more probabily, you will discover that our numbers are
-> even worse.
-
-if you count enhancements, adding features... in maintenance, i confirm the
-numbers, and find them quite normal.
-
-if you only count bug fixing, the time would be much shorter (around 30%).
-
diff --git a/docs/advocacy-interactive b/docs/advocacy-interactive
deleted file mode 100644
index 99036008e..000000000
--- a/docs/advocacy-interactive
+++ /dev/null
@@ -1,60 +0,0 @@
-
-> > We already have some functional backends, frontends, that works great, and has
-> > not been thrown away since 1 year. We use it during install, post install, mcc
-> > and so.
->
-> But aren't generic enough.
-
-DrakX handles:
-- buttons
-- bool values (checkboxes)
-- ranges
-- entries
-- combo boxes (editable or not)
-- lists / radio boxes
-- tree lists
-- iconlist
-- wait messages
-
-Features:
-- all the entries above can be mixed
-- nice separation between data and displayed data (eg: choose in list of
-objects representing hda/hdb/... but displayed nicely with size...)
-- keyboard handled nicely in GTK frontend
-- callback on events:
- ok pressed => check before the dialog is hidden
- focus changed =>
- * enables pre-setting things based on other entries
- * value checking on the fly
-- simple/advance toggle
-- shadowing of entries
-- tooltips
-- size of windows computed the best possible
-- perl-based
-
-Misfeatures:
-- display not flexible (though i don't know any of the tools we're talking
-about that is flexible => nice)
-- quite a few features are gtk only (simple/advance toggle, shadowing of
-entries, certain events, tooltips).
-- a stdio front-end exist but handle only certain entries. It would need a
-week-work to finish it
-- a http front-end could be done (mod-perl needed)
-- perl-based
-
-The DrakX frontend (called "interactive") could be moved out of DrakX.
-
-eg of use:
-
-<#part type="text/plain" filename="~/bin/perl/imessage" disposition=attachment>
-<#/part>
-
-[...]
-
-> > -provides a lot of frontends
->
-> And you ideally have to provide a frontend by widget set.
-
-nope. The interface is completly standardised, even if it include some
-gtk-like niceties. The *complete* newt (and not just entries and radioboxes
-like bus) binding takes 241 lines.
diff --git a/docs/comparisons b/docs/comparisons
deleted file mode 100644
index 716efd938..000000000
--- a/docs/comparisons
+++ /dev/null
@@ -1,91 +0,0 @@
-redhat 6.1 (fr?), install 766MB, df 900MB, 35min (asked for all groups except "everything")
-
-upgrade to redhat 6.2, sum 757MB, df 936MB, 20min
-
-mandrake 7.1, install 755MB, df 1091MB, 17min (asked install size 910MB), 515 packages
-
-upgrade to cooker, sum 1000MB, df 1404MB, 35min
-
-
-redhat 7.0b, install 815MB, df 960MB, 18min
-redhat 7.0, install 995MB, df MB, 26min
-
-7.2b, 3.3GB 2h26
-
-
-7.2b: (lang fr)
-compssLevel df rpm time fs df/time
-
-100 64 59 0:59 ext2 500M 1.08
- 90 132 127 1:50 ext2 500M 1.20
- 80 226 218 3:26 ext2 500M 1.10
- 70 449 387 5:52 ext2 1G 1.28
- 60 614 541 8:36 ext2 1G 1.19
- 50 1113 943 17:40 ext2 2G 1.05
- 40 1193 1013 20:39 ext2 2G 0.96
- 30 1262 1072 22:28 ext2 2G 0.94
- 20 1445 1219 27:34 ext2 2G 0.87
- 10 1649 1394 36:58 ext2 2G 0.74
- 0 1943 1638 48:02 ext2 2G 0.67
--10 2957 2519 101:49 ext2 4G 0.48
-
-7.2b: (lang all)
-compssLevel df rpm time fs df/time
-
-100 70 59 1:04 ext2 500M 1.09
- 90 289 281 4:20 ext2 500M 1.11
- 80 373 361 5:41 ext2 500M 1.09
- 70 890 794 13:28 ext2 1G 1.10
-
-
-mem used 7.2cooker
-gtk: runinstall2 13608(data 9572) + FBDev 2984(data 1544)
-newt: runinstall2 9516(data 7528)
-stdio: runinstall2 9160(data 7372)
-
-8.0rc1: (lang fr)
-
-rpmsrate
-
-4 () 175 139 3:25 reiserfs 2G 0.85
-4 all 831 786 18:08 reiserfs 2G 0.76
-
-8.1b
-
-5 () 77 66 1:24 ext2 300M
-
-8.1pre_rc1 rpm df time/rpm rpm/df
-
-6 () 82 66 1:26 ext2 500M 1.05 1.24
-5 () 89 71 1:38 ext2 500M 1.10 1.25
-3 () 94 77 1:46 ext2 500M 1.13 1.22
-5 X 145 127 2:09 ext2 500M 0.89 1.14
-3 X 231 217 3:26 ext2 500M 0.89 1.06
-4 kde 393 316 4:31 ext2 2G 0.69 1.24
-4 kde 393 316 4:41 ext2 2G 0.72 1.24
-4 kde 393 316 4:43 ext2 4G 0.72 1.24
-5 all 367 337 5:02 ext2 500M 0.82 1.09
-4 kde+gnome 454 370 5:50 ext2 4G 0.77 1.23
-4 kde+gnome 454 370 6:10 ext2 4G 0.81 1.23
-4 kde+gnome 454 370 6:24 ext2 4G 0.85 1.23
-5 all 489 406 5:55 ext2 4G 0.73 1.20
-5 all 490 406 5:18 ext2 1G 0.65 1.21
-4 kd+gn+dsk 594 494 7:31 ext2 4G 0.76 1.20
-4 prev+dev 827 696 10:27 ext2 4G 0.76 1.19
-4 all 1100 988 19:34 ext2 1G 1.07 1.11
-3 all 1640 1331 31:33 ext2 2G 1.15 1.23
-3 all 1740 1434 39:38 ext2 4G 1.37 1.21
-2 all 2252 1843 54:40 ext2 4G 1.46 1.22
--1 all 2490 2048 61:02 ext2 4G 1.47 1.22
-
-# perl -alpe '$F[4] =~ /(.*):(.*)/; $r = ($1 * 60 + $2) / $F[2]; s|\S+(\s+\S+)\s*$|sprintf("%.2f", $r) . "$1"|e;'
-# perl -ape '$r = $F[2] / $F[3]; s|\S+\s*$|sprintf "%.2f\n", $r|e;'
-
-
-redhat 7.3:
-- do not halt the box when "halt" is used
-- no sysreq
-- kdm has gnome entry whereas gnome is not installed
- => choosing gnome gives a flashing black screen and kdm reruns
-
-- repartition of packages on various CDs is crap
diff --git a/docs/diskdrake.TODO b/docs/diskdrake.TODO
deleted file mode 100644
index e6f2da038..000000000
--- a/docs/diskdrake.TODO
+++ /dev/null
@@ -1,23 +0,0 @@
-- test what windows can handle (the number of partitions)
-- better keyboard focus handling
-- end sector in Create
-- add warnings for scsi drives if you create more than sdx15
-- the information put in save/restore partitions must be cleaned
-(remove mounted/formatted/..., also remove the Data::Dumper dependency)
-- test, test, test
-- do not allow swap partitions above 2Gigs
-- wanting the first partition to be extended is not used
-- maybe warn if a mounted partition change of dev number
-- text version
-- better error handling (what to do if we find a bad partition table?)
-- display the information about the correspondance color2type
-- handle the partition labels (missing information here)
-- add comments in the code
-- add documentation
-- handle the `luke' case (main extended partition must be extended)
-- ability to batch actions (like chained moves)
-- add a verification after fdiskReadPartitionTable that the start_cyl,
-end_cyl... do correspond to start and start+size. For the moment, this
-information is just discarded :(
-This verif can't be done in fdiskReadPartitionTable as start is relative in
-extended partitions
diff --git a/docs/drakfont/Makefile b/docs/drakfont/Makefile
deleted file mode 100644
index b70b4a0c8..000000000
--- a/docs/drakfont/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-#
-# Project : Projet Libre
-# file : pki.tex
-# Date : Thu Jun 21 19:26:19 CEST 2001
-# (o- Id : DUPONT Sebastien
-# /\ mail : <dupont_s@epita.fr>
-# Y_/___________________________________________
-#
-
-RM = @rm -f
-
-CD = @cd
-
-ECHO = @echo
-
-PRINTF = @echo -n
-
-FILE = drakfont
-
-DVI = @dvips -j0 -Pcmz -Pamz -o
-
-PS = @ps2pdf
-
-LATEX = @latex
-
-normal :
- $(ECHO) '/*--LATEX--*/'
- $(LATEX) $(FILE).tex
-
-all :
- $(ECHO) '/*----------latex -> dvi -> ps -> pdf------------'
- $(ECHO) '/*--LATEX--*/'
- $(LATEX) $(FILE).tex
- $(ECHO) '/*--DVI -> PS--*/'
- $(DVI) $(FILE).ps $(FILE).dvi
- $(ECHO) '/*--PS -> PDF--*/'
- $(PS) $(FILE).ps
- $(ECHO) '/*--That s all--*/'
-
-
-ps : normal
- $(ECHO) '/*--DVI -> PS--*/'
- $(DVI) $(FILE).ps $(FILE).dvi
- $(ECHO) '/*--That s all--*/'
-
-pdf : ps
- $(ECHO) '/*--PS -> PDF--*/'
- $(PS) $(FILE).ps
- $(ECHO) '/*--That s all--*/'
-
-clean :
- $(RM) $(FILE).toc $(FILE).log $(FILE).aux *~
-
-fclean :
- make clean
- $(RM) $(FILE).ps $(FILE).pdf $(FILE).dvi
diff --git a/docs/drakfont/dia_srcs/drakfont.dia b/docs/drakfont/dia_srcs/drakfont.dia
deleted file mode 100644
index c4502a12e..000000000
--- a/docs/drakfont/dia_srcs/drakfont.dia
+++ /dev/null
Binary files differ
diff --git a/docs/drakfont/dia_srcs/drakfont_install.dia b/docs/drakfont/dia_srcs/drakfont_install.dia
deleted file mode 100644
index 737c19b9f..000000000
--- a/docs/drakfont/dia_srcs/drakfont_install.dia
+++ /dev/null
Binary files differ
diff --git a/docs/drakfont/dia_srcs/drakfont_uninstall.dia b/docs/drakfont/dia_srcs/drakfont_uninstall.dia
deleted file mode 100644
index c06f92dd6..000000000
--- a/docs/drakfont/dia_srcs/drakfont_uninstall.dia
+++ /dev/null
Binary files differ
diff --git a/docs/drakfont/drakfont.jpg b/docs/drakfont/drakfont.jpg
deleted file mode 100644
index 898dfe440..000000000
--- a/docs/drakfont/drakfont.jpg
+++ /dev/null
Binary files differ
diff --git a/docs/drakfont/drakfont.tex b/docs/drakfont/drakfont.tex
deleted file mode 100644
index bbc936e5b..000000000
--- a/docs/drakfont/drakfont.tex
+++ /dev/null
@@ -1,152 +0,0 @@
-%\documentclass[pdftex]{article} \usepackage{hyperref} .
-%\documentclass[pdftex,onecolumn,11pt,oneside]{article}
-\documentclass[onecolumn,11pt,oneside]{article}%seminar}
-%\usepackage[pdftex]{hyperref}
-\usepackage{isolatin1}
-%\ifx\pdfoutput\undefined
-
-\usepackage[dvips]{graphicx}
-%\else
-%\usepackage[pdftex]{graphicx}
-%\usepackage[pdftex]{hyperref}
-%\usepackage{type1cm}
-%\fi
-%\pdfoutput=1
-\usepackage{color,graphicx,shortvrb,epsfig,verbatim,tabularx}
-\usepackage{url}
-\usepackage{hyperref}
-\urlstyle{sf}
-\usepackage{fancyheadings}
-\usepackage{program}
-\usepackage{ulem}
-\usepackage{amsfonts}
-\usepackage{xspace}
-\usepackage[english,francais]{babel}
-\pagestyle{fancy}
-\newcommand{\trtitle}{Drakfont\\ fonts importation for mandrake linux}
-\DeclareGraphicsRule{.ps}{eps}{.ps}{}
-\DeclareGraphicsExtensions{.ps}
-\renewcommand\star{{\ttfamily*}}
-\let\package\textsf
-\newlength{\gxlen}
-\settowidth{\gxlen}{\package{graphicx}: }
-\newcommand\gs{\makebox[\gxlen][l]{\package{graphics}:}}
-\newcommand\gx{\makebox[\gxlen][l]{\package{graphicx}:}}
-\MakeShortVerb{\|}
-\begin{document}
-\title{$Drakfont$ fonts importation for mandrake linux}
-
-\begin{figure}%[ht]
-\begin{center}
-%\caption{Exemple d'image}
-\mbox{\epsfig{file=mandrake.ps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-\end{center}
-\end{figure}
-%\begin{figure}
-%\begin{center}
-
-%\end{center}
-%\end{figure}
-\author{Dupont Sebastien \\ sdupont@mandrakesoft.com}
-\date{05/10/2001}
-\pagestyle{myheadings}
-\markright{\scriptsize \trtitle}
-\title{\bf \trtitle}
-\maketitle
-\section{drakfont Future Overview}
-
-\paragraph{Fonts import :\\}
-\begin{itemize}
-\item pfb ( Adobe Type 1 binary )
-\item pfa ( Adobe Type 1 ASCII )
-\item ttf ( True-Type )
-\item pcf.gz
-\item Speedo
-\item pfa ( Adobe Type 1 ASCII )
-\item ttf ( True-Type )
-\item and Bitmap (PCF, BDF, and SNF)
-\end{itemize}
-
-
-\paragraph{Features}
-\begin{itemize}
-\item Install fonts from any directory
-\item Get windows fonts on any vfat partitions
-\item UN-installation of any fonts (even if not installed through drakfont)
-\end{itemize}
-
-
-\paragraph{Support}
-\begin{itemize}
-\item Xfs
-\item ghostscript \& printer
-\item Staroffice \& printer
-\item abiword
-\item Koffice, Gnumeric, ... studying
-\item all fonts supported by printer
-\item ( aliases by RENDER in Xfree86 .... -> later )
-\end{itemize}
-
-
-\section{Window interface:}
-\begin{itemize}
-\item
-\item Fontselectiondialog widget
-\item Command buttons under Fontselectiondialog (like the actual frontend).
-\item Commands buttons:
-\item import from windows partition.
-\item import from all fat32 partitions and look for winnt/windows/font
-\item and import all (delete doublon) but don't import if already exist.
-\item import from directory
-\item look for if it exist before for each font and not delete the original.
-\item (replace all, no, none)
-\item expert options:
-\item ask the directory, and look for if it exist before
-\item if it exist ask: (replace all, no, none)
-\item uninstall with list per font type
-\item Expert additional switch
-\item option support: ghostscript, Staroffice, etc...
-\item check-button. (by default all check)
-\item Printer Application Fonts Support...
-\item check-button. (by default all check)
-\end{itemize}
-
-\section{Command line}
-\paragraph{Font Importation and monitoring application\\}
-\-\-windows\_import : import from all available windows partitions. \\
-\-\-strong : strong verification of font.\\
-\-\-install : accept any font file and any directory.\\
-\-\-uninstall : uninstall any font or any directory of font.\\
-\-\-replace : replace all font if already exist\\
-\-\-application : 0 none application.\\
- : 1 all application available supported.\\
- : name\_of\_application" like staroffice for only this one.\\
-
-\section{Graphics}
-
-to visualize the conceptual graphics please see:\\
-drakfont.jpg\\
-drakfont\_install\.jpg\\
-\& drakfont\_uninstall.jpg\\
-
-
-
-%\begin{figure}%[ht]
-%\begin{center}
-%\caption{Exemple d'image}
-%\mbox{\epsfig{file=drakfont_install.ps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-%\end{center}
-%\end{figure}
-
-
-%\begin{figure}%[ht]
-%\begin{center}
-%\caption{Exemple d'image}
-%\mbox{\epsfig{file=drakfont_uninstall.eps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-%\end{center}
-%\end{figure}
-
-\end{document}
diff --git a/docs/drakfont/drakfont_install.jpg b/docs/drakfont/drakfont_install.jpg
deleted file mode 100644
index 795a5a711..000000000
--- a/docs/drakfont/drakfont_install.jpg
+++ /dev/null
Binary files differ
diff --git a/docs/drakfont/drakfont_uninstall.jpg b/docs/drakfont/drakfont_uninstall.jpg
deleted file mode 100644
index 711f28e77..000000000
--- a/docs/drakfont/drakfont_uninstall.jpg
+++ /dev/null
Binary files differ
diff --git a/docs/drakfont/mandrake.ps b/docs/drakfont/mandrake.ps
deleted file mode 100644
index 1af9d5bb4..000000000
--- a/docs/drakfont/mandrake.ps
+++ /dev/null
@@ -1,534 +0,0 @@
-%!PS-Adobe-3.0
-%%Creator: GIMP PostScript file plugin V 1.12 by Peter Kirchgessner
-%%Title: /home/seb/drakfont/mandrake.ps
-%%CreationDate: Fri Oct 5 18:28:29 2001
-%%DocumentData: Clean7Bit
-%%LanguageLevel: 2
-%%Pages: 1
-%%BoundingBox: 14 14 424 84
-%%EndComments
-%%BeginProlog
-% Use own dictionary to avoid conflicts
-10 dict begin
-%%EndProlog
-%%Page: 1 1
-% Translate for offset
-14.173228 14.173228 translate
-% Translate to begin of first scanline
-0.000000 69.000000 translate
-409.000000 -69.000000 scale
-% Image geometry
-409 69 8
-% Transformation matrix
-[ 409 0 0 69 0 0 ]
-% Strings to hold RGB-samples per scanline
-/rstr 409 string def
-/gstr 409 string def
-/bstr 409 string def
-{currentfile /ASCII85Decode filter /RunLengthDecode filter rstr readstring pop}
-{currentfile /ASCII85Decode filter /RunLengthDecode filter gstr readstring pop}
-{currentfile /ASCII85Decode filter /RunLengthDecode filter bstr readstring pop}
-true 3
-%%BeginData: 29637 ASCII Bytes
-colorimage
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-bl7e@q"4E6s+13Ds*t~>
-bl7e@m,@els+13Ds*t~>
-bl7e@T5=@Ts+13Ds*t~>
-c2RqDnG2D<JcC<$U&TW~>
-c2RqDl/9_PJcC<$U&TW~>
-c2RqD]71%QJcC<$U&TW~>
-cMn+JnG;n/i;S<-JcDJEJ,~>
-cMn+JmbuTmh#;m)JcDJEJ,~>
-cMn+Jie^A<a8UYiJcDJEJ,~>
-cMn+DnbMk)f)($uJcDJEJ,~>
-cMn+DjkIhQchi:nJcDJEJ,~>
-cMn+DST5n_V>GiDJcDJEJ,~>
-ci47Jn+l_KeBdl?s+13Es*t~>
-ci47Jkhjh)WP\C\s+13Es*t~>
-ci47J^4K&h%!hSus+13Es*t~>
-d/OCNnbW%Rn_2+VJcC<$UAo`~>
-d/OCNn);p@^TP0>JcC<$UAo`~>
-d/OCNj+q1n%LcV6JcC<$UAo`~>
-d/OCHnG2eMo&%LUJcC<$UAo`~>
-d/OCHjkS+u^p135JcC<$UAo`~>
-d/OCHTl`:/%Lk8_JcC<$UAo`~>
-lMgqbp\sLY$2s;fp\"1NjN$P:s+13Es*t~>
-lMgqbp\sLY$2s,He&K8A[BAeGs+13Es*t~>
-lMgqbq>T^[$2r)%;B-/V%3+S`s+13Es*t~>
-li.(dk/mMerri>mqY9a_oE+4!k(3P`s.]OD~>
-li.(dk/mMersJbqin;Gk_SWgdk(3P`s.]OD~>
-li.(dmFhC'rsJbkMeO[R%M'!Pk(3P`s.]OD~>
-m/I4fjeV8=m/I1an+l\UoE4C(gAQU&JcDMFJ,~>
-m/I4fje_>>m/I4bjk\5#rk\cKUso9ns+13Fs*t~>
-m/I4flbMl_m/IIiWH^N?%Ls!Y%&s2Vs+13Fs*t~>
-mJd@ggl^4WrU'UfrU9RVp&4Lbm*a;WJcC<$U]5i~>
-mJd@gglg:XrU'UfrTiCk`r3aV];N^FJcC<$U]5i~>
-mJd@gjg<_0rU'UfrR6L%+8lZO%1J$fJcC<$U]5i~>
-mf*Iik)["5qX+:crq-'^p&+Famb#_TJcC<$U]5i~>
-mf*Iik)d(6qX+:drq#.'b/=1p"21eLoR[$ns.fUE~>
-mf*IilEnChqX+:drp>Y\/e\'l!Xrf8JcC<$U]5i~>
-n,F"!nYD2sp&>!hp%nOYp@\.TrV6BpqX41Qqt(!\hT52;s+13Fs*t~>
-n,F"!nYM8tp&>!hm-F!$l0Rm2rV6BqqW?VZ`;IIS^p(69JcC<$U]5i~>
-n,F"!o>7BVp&>!h[uQH0T!cSkrV6BqqQkK3(&JIB%70K7s+13Fs*t~>
-n,FI)^NR3SrVuomhY$U:q"X[\qY0^VpA+[ds82B`p\"CT!oq>fJcC<$U]5i~>
-n,FI)^j!BUrVuomg;hIdf%Jg6kNM-qn+?PWs82-AeAqF&!jo2uJcC<$U]5i~>
-n,FI)d@e5>rVuom_BM'9>A8)$G_hZm`nC%as80]m<Zq5K!Y$ODJcC<$U]5i~>
-nG`[jf8YC8q>UBuqVJd?m.L&NpAajeq#1!kp%eIZp%e4]kKW1@s+13Fs*t~>
-nG`[jf8YC8q>UC0qVJQ`]>_n8c-Xnhg"Y?>kiqElf#bi+_?.6OkCNYas.fUE~>
-nG`[jhm8^'q>UC0qVI;C%2gQM4%)eE@rZaAKVFlk?7QZc%Kd4N"m:I:JcDMFJ,~>
-nc&gmm]UN9m/I"a#6+8C]\r,HrUg-_rq??c!VZ3]oE4O8iVnE.JcDPGJ,~>
-nc&gmm]UQ:m/I"a(&mjRYd1mV_SX4/`lQ?JcdC7lcH*p!_?7KSh>W!*JcDPGJ,~>
-nc&gmnApp+m/I"a(&mjRCCL^_%M'-d*@NX&6:t6X5:%$?%Km:P%*&9ts+13Gs*t~>
-nc&dibD(8oq>C6srp\(Nj6cI(oE4^PjnOE,JcDPGJ,~>
-nc&dibD(;pq>C6srp\(:[(O6N_?7]o`5D>d"2VXrpjrHrs.o[F~>
-nc&dif<14fq>C6qrp\&r%J^M6%g3L](D78P%KT)pJcC<$V#Pr~>
-o)Apnm'1H"lMg\\#6!f&dH0iglLY2OnG*"XrsA\uq"XjgqtB^[JcC<$\c70~>
-o)ApnmBLT$lMg\\#6!f&\@0,fm(rqD`5^X+rqQL"rpo1Err;l[jSON.JcE:\J,~>
-o)Apnm`LrrlMg\\"T@T$+q<fI"VDOmC#f3frsA\WEU3W(qji66JcC<$\c70~>
-o)Amjb*?Map%eUlqr>9CjmVg,oEY'_p\"4Rr;QWo$2s&VmeZnNp>>Uqs+13\s*t~>
-o)Amjb*?Pbp%eUlqr>2i[_BTE_?e'"cIM%Anb`=`rsAYegtV](lHe5ZJcC<$\c70~>
-o)Amjf"$U`p%eUjqr=df%I4K1%hp3M>Ci]roD\[f$2s$mBDVSN(rc6#s+13\s*t~>
-o)Am`[;pHKrV6BrptE13kO@d/(%q:pq"X[Yp%\Lcs8M65p?qSEe(skOs+13\s*t~>
-o)Am`[W6TMrV6BrptE!V\A.@H(;n2:dFR%+k3DR:s8W)^b0fDEf>-5=JcC<$\c70~>
-o)Am`bFssSrV6BqptC`;%I4K?%hp-C8mQ7RKs0)+s8W)^Q8?5H>YX&NJcC<$\c70~>
-oD]!me>?o:lhCD`rq+[OhWjXqo`+Uap(-omq"aUUq=E"uo]5Yem/DS9JcE:\J,~>
-oD]!meYd,>lhCD`rq+[DZ+@a9_A'o,aNMlWf%T6KmIg(uccXqbaR&nWs+13\s*t~>
-oD]!mgr,DGlhCD_rq+ZT%1VS4'b:op,r7b[?>XPE\DZu+?7Vct]^5WKs+13\s*t~>
-oD]!f^6W?3nb2terp\+KipH=!o`+Uap($ilq"O+(guI)Go(DbUrdk*#s1JA^~>
-oD]!f^6`H5nb2terp\+:Zb4-;_@si+aNVuZf\>QHa2#=.eDfTZqu20HJcEC_J,~>
-oD]!fcFJk?nb2tcrp\*'%H\-7%h]a,2F:;PDg@Us1*L+oT;9Krrdk*#s1JA^~>
-oD]!]YCC#np\"OjrThAHk3qp%o_nFnp@?/4i8NJDeEQYKc-"5QrlP;YVY^&e!rCEmrQ58a`3ciI
-d/OCNp#k&U\;/o>h#@ZZp#k&V\rFr4iVs>cn`8KObf\)MdFe!gir92]puU2Tbl5cb^&\&$s*t~>
-oD]!]YCC#np\"OjrThA1\%]]>_A'o-aN2ZXdCHg.]=keag\&b7bKS30b6#MWqY1!kqUNslb6?&0
-`3ciId/OCNp#k&U\VT)@h#@ZZp#k&V]8k/7iVs>cn`8KObfe/NdFn'hir9DcpuU2Tbfe2P^V9T9
-s*t~>
-oD]!]aJt!3p\"OhrTh?P%H@p+%hp!3-mB]:J%7BArWNL]p"S9UgY;_]!n>*`p\t<kinaRe"PMAM
-b59Qc#laScjPJ7fjo4'8#laScjPS@lgAU"1%0#nbjk\\Fg=b?Co`!kM"oe>aj5&JhgAfS$qjmb;~>
-o`#-pfr/arg&(FA"oIDohWO@goFpf^hTE^[d+I+3\@B)hioYiBMk'a<!fM0fq#:d$hS6+`T:M*e
-C1Mkcdf0[Qg;:S9ZD;SVjSds8$N8Ym]Xb>FH>(\%jSoMbptsB7]<eK2rgs@hW2mGdrT4%`rTDG@
-ZDXGrT)saenX]]1~>
-o`#-pfr/asg&(FA"oIDmZ+.O/_@s_sYb@bpYJAE'\@B)hioYlDMk'a<!fM3gq#:d$hS?1aT:M*e
-C1Mnddf0[Qg;:V:ZD;SWjSds8$N8Ym]XkDGH>1b&jSoMbptsE9]<eK2rgs@hW3!MerT4%`rTDG@
-ZDXGrT)safnX]]1~>
-o`#-phSl(>g&(FA"T.;a%1V;,rs]MI#nAC@F#gb?\]3XkXJrM=rP&E>SaH4P%/o8;a1oC'[\K.H
-S+>#-$N9&:eC)RXUQ4F6hZ!r]j3uH'bep?>eGA8+#laY_hUg0!`PMPg"iA7"cKP5grs&Ggh:9`f
-_>_1NY+"mOs*t~>
-o`#-k`1LULi;W?J"o6r`jR)O$oH!MhhT2q%V6%_Zamms?io]goWKMCCDf9T7A7i^Wq>Uls_PM^#
-EG/W[H],6!df0[K[s3%5GACN#iVq^6$MV#aF)?#9>[lFajo6"lim#-6Ob7puCMe$3G'nq%P-t2M
-rseqc_lA`EF(f,p@pNR+qYpZso@s5Bs*t~>
-o`#-k`1U[Ni;W?J"o6r[[Cj?=_B$G(Yb-l2RA-dea2uK^io]goWfhOEDf9T7A7i^Wq>Uls_PM^#
-EG/W[H]5<"df0[K[s<.7GACN$iVq^6$MV&bFDc2;>[uLbjo6"lim#-6Ob7puCMe$3G'nq%PICAO
-rseqd_lA`EF(f,p@pNU,qYpZso@s5Bs*t~>
-o`#-kd(bp"i;W?J"8U`5%HJ$!%2'$U$Vu+1*4lc6i8Wnik-LYHT`1PdTU(S\rV?I%p=$pYT:h[3
-H]"0#n'_4CpW&ntT;8$8L>i-grsJMAUn"!NSr/*QqrRhkr9<%c`3ueET:MRGTqnTfZa\-TkPl"i
-kL[_[W1f]IQ'I8]k5,)[rq>LQW;hA~>
-o`#*d[?tH4iq!*Orq+U^kO]kem,#gfX.uc3c/-+Vg@4Y3s8V`JaII`jBOk^aA?5P&rseqYZA*4-
-An"tc][5[4df0XJgUa)+DIZpqkM?.FpYNZaKQL^.E9$r[rtYF__PW-/@pN2?>?b?@A7fLoF`b+j
-kl1kZ]qg0nA7#49!`N1[rVm*#m+]aaPkD!TJ,~>
-o`#*d[?tH5iq!*Qrq+UM_o(`U+2GLmT8\SmWkcK^ZHL,*n,E@eo\RZZIq35'An#;Pq>1+#rR\?0
-D.R<g>][R)iqLn$$2<2cTmU`f>^5GfrsJMW^Sup0@p<p4roX4qqq/c_LiHp1=B\p5>[_/TBQ/*:
-\,>Ii%J7B1J8/V$='/O*;cr&Xrs&Gggrugaor.n@~>
-o`#*daL[Uhiq!*Qrq+T=&eX=;rs]qU$49S'^m5IRb>Su4rr<#jhT2duQC+#+P`30KqYq$'hor9p
-R$j.jL:kmmpX9'JpY39ST:_@%Np#6u$MWDlWLorNKS\[fk5Q1nimu&PTTkChKS>2>Od;B(T;/.&
-r94.io[1OUS<f1eIXHKcG2iK##6"&QgW-\oW;hA~>
-o`#*_Y**4%ipm$Orp7u)p$;5no'G5SYcFP#`80S<da$mpg!]Zqs8DcYY`!(2BkCmdRIp@U%J7;r
-C2Rg"@9\fPp%n[9rsAYqkKfKE@U+lYh>[f[o]t&"L1=JFlK8*_qpN'DH"C;]<*!I??<^cDA7fIh
-AT[29lMhb#f;aXCARA><Dg6PQL$&F8rp%YE[[qAdm&9r7~>
-o`#*_Y**4&ipm$Orp7_N`p:Jb^q6hCN/3h#`80S%YKl1M]Wh22s8DcYY`!(3BkCmdRIp@U%J7;r
-C2Rg"@9eoRp%n[9rsAYqkKfNF@U+lYh>[f[o]t&#L1=JFlK8*_qpW-EH"C;]<**RB?X-rFA7fIh
-AT[29lMh1hf;aXCARA><DuP"jL?AO9rp%YE[[qAem&9r7~>
-o`#*__mY_]ipm$Orp619+6j@9%3>la$;[D7h<&&XcK!"r-M[W@rV>`pZBLK>R$E]4o_SRso[(%8
-R%0S,JXtfnqYnqC$2sJYcaTp<K:M;arsAYrld`SMP_,=gk5Q7phU/s3R#QQ;FaJO^I"dTHR$jJ2
-Rd9t<rsAY\`iu#$O*Z#%reLuJk5YJ\mb?C>^7Lk]W;hA~>
-o`#*ZUkW8cipcsMp"fB8mIV+`m,#gfX.uc7h=(70ftQD>j2T+,rVm5nY_6SBEG/onK^em=$iSSQ
-AoDX/BO>#Io$.1>roKu.@9o]!gA_B@WJ4hdV"!RI)#`C(R!*(K;HJLGZF-p8L1t./AnPUc]DUso
-)>M+?H=pbn?DG-N`Pp?ss8VuHXd"9O@X..9s*t~>
-o`#*ZV1rAeipcsMp"%[8mD9RQ]<IodLmP-[h=(70^o$&bj1r.lrVm5nZ%Q\DEG/onK^em=$iSSQ
-AoDX/BO>&Jo$.1>roKu.@:#c"gA_B@WeOqfV"!RI)#`C)R!*(K;HJLGZF-p8LM:70AnPUd]_q'p
-)>M+@H=pbn?DG-N`Pp?ss8VuHXd"9O@X74:s*t~>
-o`#*Z_lo/TipcsMorV=Eljj%)&ISpQ:SPe`n,)Q69AoU*Sm:^^rsJ57Xc8[=R[9,,nGE4nrS5>X
-Od;]1Ne"S/c2S%Jjhn-]K!+Xtrs%],YE=C=nE9fgrT2G=UmR0gG)iE)[BQToO-H$"R?WcQr9F;"
-ps6[OR?rbYV7X[b`ROGXs81Tm\#Gs[PNf%GJ,~>
-o`#*USpk'WipcsMo^2GHmdq7aj3"U,UTDDin,*+anBoYPs7bI*nbrIpl)/<.WHrAm@s759rsSJ2
-I:ACfH"^Ghc1oQ`#Q</JHsU*ip"TKOrR.Hg?!Y;?kPlCl^8$'h@ola#aP>qAk2+1GFD,9!@UY`"
-lMhao^RTFYA7Bc1lgXH7o_\[gps#U\B4YY(l)=W4~>
-o`#*UT710YipcsMo\e<Am_T^R[@rP8Q`A![n,*+anBoYPs7bI*nbrIpl)8B/WI&Gn@s@;:rsSJ2
-I:JIhH"^Ghc1oQ`#Q</JHsU-jp"TKOrR7Qi?!Y>@kPlCl^8$'h@ola$aP>qAk2+1HF_GB"@UYc#
-lMhao^moOZA7Bf2lgXH7o_\[gps#U\B4YY)l)=W4~>
-o`#*U^T!9KipcsMoS[$&m1'g>$OR5:U;YmVqu6WbdF%F_pYacqrVm5h`LVjeVOa*;PjJ;I$hVcD
-Ln(08RYu[Aps&gDrS#,eNe"q<g]%NWg;9eIJ&_3FrttFU_PirgJp*g.gudh_hT2LdS!f\/M6-I:
-ru(IQ]q_!^O-@uWnF?&@qu?]ke&%uMR$+!(W;hA~>
-o`#-TSpXpVgA^[C"T@]_p\""I$M!,kX.uc7h=(7?rr39#nF?DUrqQ0`rr3B*gRr(l_2W\Q@;"d$
-rs\kUW+'bVOa^kHB&<L2rs/AEVfl9Mg%sJ'#Pc0+F'E),qrn%trnXZ6D.[6aLXGVgrr<#sm`B`\
->$>!/P4JSO$NB_ai7ci8j6?C=rVn,AnE]E#]pj(TASZtFkNV-or9Wb8k/F0@AnGb*cfjZYk3)`H
-s*t~>
-o`#-TT6t$XgA^[C"T@N>dDbRk$Ga!9LmP-[h=(7?rr39#nF?DUrqQ0`rr3B*gS&.n_2`bR@;+j%
-rs\kUW+'eWP($tIBAWU3rs/AEVfl9Ng%sJ'#Pc0,F'E,-qrn%trnX]7D.[6bLXGVgrr<#sm`Bc]
->$>!/P4JSO$NB_ai7cl:j6?C=rVn,AnE]E#]ps.UASd(HkN_3pr9`h9k/F3AAnGb*cfjZZk3)`H
-s*t~>
-o`#-T^Sd0Lh#?mE"T?Pj8f@%,#n77L:SPe`n,*+`rs8Jjnb`@cq"=O`rsSh_^m'YkXJMAJMs($<%
-/o#$Nf(?RWL/KohYk_!#PlogUksTSqV2#Tps-RHLk+4Vkl2P"ilJBrR?NDkdI@&4s8W&caeauPL
-OslIo)8RqrqGmFjQ#7bn,!%^s!.O8nF5Vd]qLj]S#+d)n*KQAnaQ&6d_hlKR@9u)mdKW2mf'BhJ
-,~>
-p&>9rfUI1qAAA*6rr_uaq"=(I#jTO4W5RN\qu6*b%/\5;@X67aIVN;&b5VD?%K>h.I9iVgS:>$Q
-E97)srseu&j4W#8g[4q*f#-ePrVm?+nD;IBrVulhiRu`LrqQL&rp\gma3WGQSnqYIiVrfU$iTGD
-a6`g)o\S-WrVQU'rTr7if@K0ao\.C>rVlg-o=(-$>B&X%s8W)nimu]Zq>V-,le:"AlMgh`q8/\K
-BP(dkW9sT^rr`5OC0CL:32Q3Grq"sk`4`U`XfSb5[(FcZrr;`7_S!FWKl(F7COr.a[$dWS`50!q
-Y)I=3B52a`ZFI90PP;6[J,~>
-p&>9rfUI1qA\\37rri&Tfuh5$_?d`GLo&&Gn,*+Rrs\eJS76chQ@<RWB$1,Prsetr]7!t[aII`i
->B/d(r;R6*puL,ZfA#]jm+92@rr)j+rp\difDYaKo\nKRn,E+^%K>kSdE'\f^7T4HCZ59krsSel
-f>m7Wrq,'tir/cS!r_K>rmqA<rUegbg&:pM&+d8uBNoH9rr<#tpu9oVrV?I,rTi4kf'<87s7sR(
-H>$o$D5ck$r;Qltf5"Rg=?*/Js8MWGcG[H+YcY"3['dNop&>!cb/:m&VhJu"B5<*mZa?0pm)?fO
-]!%'3AnPk)S[,f5R[!QLs*t~>
-p&>9rgq9PJM9,Ydrri%ZC+^+e%L<LO$BrEan,*+Rrs\eS]T/*!ZDj@WMUDG&rsetsc_uAqb.Xg>
-KSegir;R6*q<I#!ioT_.nD`!err)j+rq#=.ir/oVp?CVroD\Ob%K>t_hUpZCcbH$,L#N%0rsSeq
-in3f#rq>O6lM^V[!r_WLro+.MrV#=)jSf)X&+dlSRtQUXrr<#tq<Hu!rV?I,rUAn.iU?dGs7t$U
-Vja$?QaH/Zr;QltfoULXFuZ\rs8M]Rh:U3%b/hWGc-=Vmp\t3eg"4[!`N>`"R@UCobg!f8m+Bn9
-dE/\dR@0SC^<FsK]X.@8s*t~>
-p&>9qe<bGiA\.^/rri;fq=jRMoEO?eX3pA4rpKdpp:Z]!N7jqXD.7%`qYpL'qp)$GD:$7nHsp9;
-li$i-rqG-bVh9;XWO9ORQuhZnrpJ^ob/:HB[J'1A`k&CNP0Nt&ruh:,e%:laFG6?XK4J52kPk5<
-g!RmUUOqY(gr[+(Ls#\qrsnq`b-[7VNMEen_5D=oqYpL+m]_pd>`%bGs8D-*^8cn'rVca4rqG*\
-UR%RPTs=LpoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfH+UlpI\G'/(ZK85MVUXoD3Z^lo'H#IA.
-B52C3Jph<eeu=peJpMEMAnPdpG_(KqBRfHQs*t~>
-p&>9qeX1VkB"Rm1rri;ahU9C2_?RE4UXAN,rpKdpp:Z]!N7jqXD.7(aqYpL'qp)$GD:$7oHsp9;
-li$i-rqG-bVh9>YWO9RTQuq`orpJ^ob/:HB[J'1Aa1ALOPKj('ruh:,e@_)dFbQHYK4J53kPk5<
-g!RmVUP%_)grd1)M9Gksrsnqab-[7VNMEen_5D@qqYpL+m]i!e>`%bGs8D-*^T*"(rVca4rqG*\
-Um@[QU9XUqoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfK,UlpI\G'/(ZK85MWUt5M4[%3#(H#IA.
-B52C3Jph<feuG!fJpMEMAnPdpG_(KqBRfHQs*t~>
-p&>9qft+#DNPkS`rri;GI7tRI%L*@LG1#aTrpKdpp<0q%SCt?PSs,,KqYpL'qq8lGL!\,[W02b$
-li$i-rqPR,`2olF`Qm#^\sr*crpo:3gXjTRanGAcg!Rs[\(^fXruh:0i6o0.Trl)DXHnR#kPk;D
-j58S@_Q2qsjkJ/#Yh8pRrsnqigWd+&Zbjr8e\n',qYpL+m_u]%Jskp(s8D<?eAeW;rVca,rqPO'
-_R[J$_9)TSoYn85rg<nYWS.(GrVlruke@"p3O[W8qrZY\_R?YIUnaccXKT%E_;Y@\aM+mZV4X3E
-R@BhGX/VG]f#G5%X/DV[R@0P9V5p_tQ^[?Fs*t~>
-p&>9qh3`IuAXiDbrr_rbq"=%H"QI&9o)A"U*:U4g@'&CoM/d$8Re?^\rp@4;=eXcaRs8=HV""B`
-,Q6oOY@q-TL6-A%LjW]Uk5P%GR[TP$I!M[1Y`jQ^I!fUSo_e_Fqq]5`?s\8GL2:U?@9ecXrRd?u
-QBI#DJ()9=P_4-kL%YKFp!UC%?<qlDE-@"k@q49irr3PoWJFtfV""E_i5)4IFCTpprr4)=jN*g$
-D1d%QHuQ7cnZ7LaAnG^mH'tnN`mNB$me,iCi[s?cpsm0RKlLX0=^#'8?=RSaG_1XmkFcNo?"%;V
-An>FX>?Y-1Gg1_G>$PKHralFG?X-c<=BBS.Y5a"~>
-p&>9qh3iP!AXrJcrri#Ufuh5#_?@3>b4>PuruCO6LL@4DZANX3A"3/ks8MDqFBYBr\XRhO?DR)i
-s!.L-bcb\bCPIpiI#*/[G38esTUVC9N-orM`j(_WH$k!QI.[@:1]-"IT3tuSP_O!hCLLJ,m/>S$
-PEqAeEe)WUY`sc`AqfpXrq4^MJR2W/QuR;)L1=cKqYpL+l)KPJ?)6uirSYPgMf`H\o`"k4rT)%i
-AT!0GEdVi/qsgbCDe<TpCjDGQ^W+[PkjJ-.rSfElo_?tPTnRJs?<LH:>[CoPD0UYebNGR5>[:cL
-AnGU`?<^T8=*`&@?s6fDAH$0H@p`JE>$+jJl)t&:~>
-p&>9qh7BGJO0/-Irri"VC+^+d%Km4Eb4>PuruCOJYD'@D^TaArN32dQs8MH3UO9'!ah4I3K!+VB
-s!.L1grc+;Js;grVm*+\O66H7^q@=jZ`'b5eB>>$V5L5[Sb2j[1]-:d^Q<o(S=,b7SW\Vqm/>nQ
-\%/rNTr-Gkb.+RLPbIdMrq>6rX,)+]TUDUZYEajsqYpL+l,KrjJZeMBrTDbLZ(mDOo`"k4rT`+M
-OGT3hTr=U#qshD(T:)+9SYj!@e(<I8mIKr7rSfj#o_@Cq_6'AqNJ3%>LlR^eSu&Kjg#oo6Mi<gc
-R@0G,NerOFIZr$VOGJgWQC+)-Q&gfYLP:29l)t&:~>
-p&>9ri0S\"A;0RGrri;fq=jRLoE4*fhYld?6gCXi@*J&VNH8W?MXg`Hqok^>C=;@PQZHJ=](Q+'
-rp%Lt?rMQ_`P77JBOP/&l2U+CMfW]JAS$."@r6'lA7f4[l2CX3qprKA=]_$-c+SaGB4,#@nb_+7
-M/R3CCN#8KEbJrj>'B93oZXOW<,AJK_jGIX@p<^+rVuosf;*h$?,H=6hQhEB?sHc`mJm4bi5(4Q
-EjE?WHZ!A@o('&0AS#IdBP_jEO-ucBZ*q3U`p!F%s81?YR<W=O<Duq-Am\kN&Rf6aDJsd;KO7ef
-@q'%^@p2q3<t'#lAm/8?A79%]AR/=6<rm7(Y5a"~>
-p&>9ri0\b#A;9XHrri;`hU0=0_?70AhYld?6gCXi@*J&VNcS`AMt-iIqok^>CXVIQQucS?](Q+'
-rp%Lt?rVZa`P77JBOP/&l2U+CN,rfKAS$."A8Z6nA7f4\l2CX3qprKA=]_$-c+SdHB4,&Anb_+7
-MK!BECN,AMEbJrj>'K?4oZaUX<,AJK_jPRZ@p<a,rVuosf;3n%?GcF7hm.NC?sHfbmJm4bi5(4R
-F0`HXHu<JBo(')2AS#IdBP_jEO-ucBZ*q3U`p!F%s81BZR<W=O<Dut/B4,%P&Rf6aDJsg<Kj\"j
-@q'%^@p2q3=:B/nB3SJCART.^AR/=6=93C*Y5a"~>
-p&>9ri4>bPOe;19rri;8HV,1C%Kd.DhYld?6gDU_K$Nf-Z_<_HU%/0_qq&W>K$ro&\tP+6_"Ia-
-rpACTOEHPj`P8(;RZ`8jl2U+TT9u1=Q^+/*LkgkKQ'm\hl2CX$qr-#2L3B3*c+Td@R?3$'nb_4I
-SX,h7S=?^MQBIJoJro?up"[`^H\&04_kiuoQ%k"NrVuosh8?4OJB%<]jijTgOG\IOmJm4bkLHeg
-KsJ@mVk0*@o('PkR$a;0R[p7U[(F2obKeJ^fC&Y<ruh3rdCZ6COFVLsH[U3kM34-nStDk)UOdT>
-N0K]tQ%s\aFps/NMgBPoMisHqQ]-:hFodB_Y5a"~>
-o`#-UP]^SJEpNAts7??ep$D;Pj2'a@s$ZkAU1IrnpXt[MAn6;Vs8MDpDHa4-l`?4a>@#qYs8MT-
-Uh!JR`T-LO]o6r=>bplho%(RBIqiCm<HOn>XaY%t?!u^ls"s]2]Tc]&S^Zrtj/n,S?<t/8rU&.L
-P(%.V@TRN?IUlARM<ju\Z$BA\]%ZT=bE7$Y?%_A?s!RZ_T6+:JgA'O+AS-3k;,aC]s8ColO^)V7
-i9Sg_H!=\@pX=Lu@:]@L6"akGDfpAVKo(nYS%ALrl+*7-B44b;GbVLOYFBWC@qB:fBnaC,WMYDh
-BP(^[H)@R?YKGP5WMueYFD>Du?YQ>8W<09Gn#l\@~>
-o`#-UP]^SJF6iJu"SCd-ai!M_!jnlbli0BPgnSFnhY5]cF(Ss2mJm1Q[r,BQl0GF5CKk,uqZ$Qc
-`2$pDIDt7:kIupq?sTSts74aUQ[`aY<`X@9ZE8UlAmJj*rr4hRhS#.Z=.Rh,o]**2D-gP[p&4:.
-^6="\A7AY\T7:BM:l=T7bcuFoA\-U`m)tQ:@U4WMrr4AB`h.?WA_Qq9XCZ!i>#A4rn,N@F^l_l9
-^>S>*T6XXLl1`YT@:<^GAjL'CC2\6@J;&iAR%1bbropt^G\:Ga;L,"B[BH'B@Uit^C2&C<YGnCS
-E+iim??rEIWNXIt^T"31P'(MOA7')Iri#t&b3uM5J,~>
-o`#-U[\T=SPO%l@"S@FZ.M;%X!Y#=mli0BPhnbV3hY5^3U6q+2mJm1Rc(B?gl0H9rSV_jLqZ$Qd
-f>Eo"N5aiIkJ4BrO+FJ's74aUW2c>LJ9QgEZE9[fR#H[Xrr4hRjO:SrG,*OQo]*EbSrJ99p&4:.
-^8S$$QAg6HTotC_ELH.gg<6=BICe/#m)uW0PD,:crr4DCdD)H4L"c=`a-)"2J9>q:n,N@Le[C3_
-^>S>*];CF;l1`YtO-,crrg?$?S=cRSWi`M5]"H>crp.qDV4!KrEJUEr[BH3^Ng,p!S!g%fYGnCg
-T:;74KnuV*WNXIt^T"31S>)L@QAU6hri#t&b3uM5J,~>
-o`#0XQ?d.RC=`CXrr`5dq=a^X#P.6Ah:prSnbMeYji6<Gs*X^eS76L"rSWl_B4,B:s81'6??Olp
-kbj/H>\i<ts8'mAH<=RmlhpeYbaWf_?,?77r:T0RP&"9(NPF*,fq*h.>@QXms8MN%Tk.;IdI[A;
-oXpN1>@#qYrqlBKViGOu<-5k$Z=$^Xbja>pN*KGaiVEKOiLka1>F"XUs"!`PRr)P[i7t\PD5jp_
-B:%6Erp[^p@9KJfqu,0MEE[;BrTCV-?<UZD@qGOL3bN,AF*`26p!9XhC1LLJLVhd-kiC=+Iq`J+
-BObeoj5S[aL2U[5?]*IpioKLtl/L^YZ\rm:A7'B*ro+"?mJ=!cJ,~>
-o`#0XQ?d.RC=`CXrri;^h9a+<_?[lg['-X=]"n-Y!k,,gli2A0bFN*_jo+,%G%Y2rl2UY*TO2lo
-punZ2AR'$0rr;i<YBj;Z_s@7#q95@Q?=(MBs8;QOY**R)=H1)Ijk68YAm8d*s8W)f^7f+?Fj]g[
-s7EsjEEcc&qYpBbj/@uR>uc!\d'@(]H-Gd3[u=QoWo<dQrSaH$@9f)crr4M@\XRGDI,NeeB5X`W
-EbLilp\sZtSmbg"j88f-YAm`bjo+ANE*c^S@:NmGAiaR<CNFfKX7af>JSJ_!<JSHFk31mW\pnF*
-AnY[i_W0Y-Tn[Jt@UG#Eio9%do',/nh6`,^An57idf/5-jR)fHs*t~>
-o`#0XZDF%TOkTg.rri;6GXNAF%fQn=$k3[@%K[(Cip6Vlqp`<?MWOfp[%s+OMs:9=fYE<!fD+RK
-YEt#uiVrlRfZL+DHc,1Is7t*VUlBoEpAb'`jhS?rLj56#fB(\kXI4lrj8]/Yo$Y@AI>H;Brr;W3
-\Y+e/g%t^Fp#EcnSVqcK^<j<AFc+E4iQnfeGcp$$rr(fjX-/%/mf*5;oZ=b;N0iJ`c'<p^[>9=)
-fD#:7e\@5mXQ03Vh8u@BLZSKt\W)?!NKKHlR/<:3R[p1NVo/2[a/b\qLj#!!g?.V[f".<;R$jD.
-P0)bDf<h]QR?NDqfAbfNmIKN$in_;RTp_4(MphUa!p&bFY5a"~>
-o`#0\SpbBcC8q('s8V]lq"=XY%.`iKfuLG"XLZ^>n+6GK"6[b[rp9Y=p:Z`"MX1<)Q?m4QA^gVB
-[r,BTm/>M0IUZQ1kl:YD[?G'&OQ-0;s7sX)F';l'qu6UAn$/*h>B%aLq>TigP@e$<jo>AXd]\:.
-=gIAms8V`'Rr2JHiVriV+7#tfA63'HjRh6#W5n/m\tE_>E7O^_s8LoOJ6uQaoD\bEn#qskCQ?fU
-NHDegi5i[anbr@/Y'aSseG&t.`0FV+L["j6hQqZ;=^"s4>$P?@@V#IM->.(*HI]WtFCnucBufQ:
-rr;umj0s>IAnPXcTDANWY`Ed9@UPDiq>U`q`g(a[A70WGW;hA~>
-o`#0\T7(KdC9%.(rr_oSfZF-0%)KWdXe(W3Q'8&Q^;9]`"1Y&Urp9Y=p:Z`"MX1<)Q[3=RB%-_C
-\8GNVm/>M1IUZT3kl:YD[?G'&OQ-0;s7sX)F';o(qu6UAn$/*h>B%aLq>TigP@e$=jo>AXe$"C/
-=gIAms8V`'Rr2JHiVriV+7#tfA63*IjRh6$W5n/m\tE_>E7O^_s8LoPJ6uQaoD\bEn$&$lCQHlV
-NHMkhi5i[anbr@0Y'aSteG&t.`0FV+M!=s7hQqZ<=^"s4>$P?@@V#IM->.(*He#`uFCnucC<,Z;
-rr;umj0sAJAnPXcT_\WXY`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~>
-o`#0\[&KU_Q+HhcrrhtK@jhld%L<LP$OR1D$4IC>%Kd.J\,Pao0_W]"MONl2k-LqSP)Iuklcu,M
-[d<tJ_5WZQP3DrFkg$Z$I@K6ns8VoA^7pF4gACmL-1Aj`R"U19l1t>I_7,hcM<4d;qqK5oML)_s
-rr<#jah44$L#N%1ru^RG[$H5f\`ED<WN+#'n^"t>JVDYKs8W)W_Q&ZH[e'Lu1@N2lSX6>,e$G.J
-h;HAhf(&_9fZC(LMq%M#maeq,FI27lptiE>I=$HqL51YFO->otrg>(&RAS]_]q_!ZJq:u.qu6Wp
-puAo]R@'D.NjAK\n\MT+R?WN'nbN1jps-FGR?ieol)=W4~>
-o`#0bY^gP%AUF"BrtYM!q=aIQn`o#X]W8'.Uo1&mdH'cfr:C*SaOC%Qs!@0?Lg[%Js6HG3Cgq%n
-ouW_1FkQTeb+Eug>E%qKqSoF\>[52<rr35r]:3S@DrUcqru1.$M.9eIk5G>[n#qsd>`%bGs7Edj
-C0PN+q>UBun?A-h>^,B1ruh="Vh8A[No'X3o&/HpqV830@9]8err<#sd%GYh?IeiMs$GtLMJI3l
-WL\$Lh"gg9me6VZn[4^#D4p%Yf"HrE;.[o@s8McQa0:YNB4=qD<`r[6@:a%_B4Z"YTnR;p@9eiS
-rVZ[/q:UdLB4b[`MXpf;Y`Ed9@UPDiq>U`q`g(a[A70WGW;hA~>
-o`#0bY^pV&AUO(CrtYLoh9a*W^Ug\GQ&(ZkTr4WYVR=.Sr5&QGT?[9"s!@0?Lgd+Ks6HG3Cgq(o
-ouWb3G1l]fb+O&h>E/"LqT#L]>[52<rr35r]:3S@E8plrru1.%M.9eIk5G>[n$&$e>`%bGs7Egk
-C0PQ,q>UBun?A-h>^5H2ruh="W.SJ\O5Ba4o&/HpqV861@9f>frr<#sd%P_i?e+rNs$GtLMJI3l
-WL\$Lh"gg9me6VZn[=d$D4p%Yf"HrE;.[o@s8McQa0:\OB4G%F='8d7@:a%_B4Z"YTnR;p@9noT
-rVZ[/q:UdLB4b[aMt6o<Y`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~>
-o`#0b]W7TkQC[U@rtG@EGXN>X%LijU$ORA5O/J%.$k<%C!t>X6qs=>/nA_\eY42JW[]>s`O3@4I
-]n_Htq>/RTVNHG#m/Qq2`2AK?`Uj*/#PH6PSV;mZrr2p9l,KrlJskd"s8VQ,\<_`7lMpnVbe9O"
-K\-&!rs%u3\=&&2kPkK(ro:quO+!JRqYp'Di:$O$aKUeVVX"0\s8CQbV2BfRq#::Ll,9itTWQ2I
-TTe1,qXEqHrVuE4\t5=nk4.H[Z&!FLb4>T3pZ';uR#$3<G'/"VK8PhYrg=.\T"De@SXGUlSE9_I
-rtG4]XJ2,NQB%[0s7*q4Tp_.$V"+9\#l)]UUm[O-Om/hEJ,~>
-o`#3jbCF>>ASnsUq#CBd'DV7gjOV8SX/2Yr_q3baZ*MsCnGMn\kK)$Fm/JBsWH)@^pAaWdLi?m?
-V;AUk=gIDnot?l=?X0]'s7*C\C0YK.qu6U"n?A-g>_D;?rs/PTUjlcWV"+Ha&F-<R@9]Mrs8M,[
-M.9eHkl1S]#4&4H@pFuZrr3`3dA)"m>f6.3s8DinrqXF(H<spup&=t,pq`M@>@ugls8W)RV1E2e
-Dfg)5C;'TDs!%ElW.SVlHC1@VA6;lY^#f.ks8Mocj4)&ZZE0a]K6:j;@fBsHA8HgPF(f/o@'0"s
-rtGCrV1reuA70`Ns7*=SEFrZfPO\JK#l)E)G@kAnGNl(+J,~>
-o`#3jbCOD?AT#$Vq#;*$jOhPe[Ao^TLm4C4_q3baZ)=V2^\kqN\=^n<m/JBsWH)@_pAaWdLi?m@
-V;AUk=gIDnot?l=?X9c(s7*F]C0YN/qu6U"n?A-g>_MA@rs/PTV12lYV"+Ha&F-?S@9fVts8M,\
-M.9eHkl1S]#4&7I@pFuZrr3`3dA2(n>f6.3s8DinrqXF(H<st!p&=t,pq`PA>A)mms8W)RVL`;f
-Dfg)5CVKcFs!%EmWIn_mHC:IYAQW#[^#f.ks8Mocj4)&ZZE0a]KQV!=@fBsHA8HjQF(f/o@BK+t
-rtGCrV1reuA70cOs7*=SEFrZfPO\JK#l)E*G@kAnGj21,J,~>
-o`#3jcDmA%R$u+pq#;'#L1;M>%1EUO$8Q4s_q3bg[V$!Xq[N];$_d@^s!?sKU4UDYs7!b+T9bhU
-iQdg:[d="dbIs^4J@+nIn]AA4LP4I[rr32l`OM7fQ0J;J#QEPsWfVe7nc&P"lGg)kJ?JDAro_;*
-P_,:drr2p%lbg&oK:M<-rtYLb_PW3<`Ua$.rVQQmq9ZpSNI].Drr3c/cG#s,KAc_.s8LonX-f*A
-U8+-@b5M8<0`BeGXI#0H]>1J/H?G(Xjno)Xrql6GeA]#)XJ;/DLPLnSR$jA-RA@$\R[K:l[IX4p
-'E77+Y+:uHN0N`0n\MT+R?WN'nbN1jps-FGR?ieol)=W4~>
-o`#6qhi2JbBP;n\rqcX2rTs@QiQJ^2WMHN)cJe6bqt/mh\(g-:rU^3Ub0]qNs!Ia#U1@`equ?<%
-MfWKKPI?KVHeJ5pn?A-r?!bbLs66G:A6jWHrr2p%l`,nQ?(CB_ru1aRT6O[J_=mp/rn!uq?!YVI
-s8C?>I:6K`nbrIlk,*c>?)7#irs/;5So@qLh#%!K#P"s\DHgE%r;Q^#o!Oiu>B]0.rs\eJTm:$G
-@q]FcB8?0Xs"O5]RWMk;>[1HHEJ1:2jQkXVf\"]ol1a`6kMtCKbe^K:DeN`p@V0q-C1_'eA@D7/
-rt=e+P]:;G?Ztc8nZ\'oAn#/3nbN1jpr8SCAn5:nl)=W4~>
-o`#6qhi;SdBP;n\rqcX2rT2eVZ_ES<PaA5XcJe6bqt/mhXKK+KrPAZITum)ss!Ia#UL[lgqu?<&
-N,rTLPdc]YI+e>qn?A-r?!khMs66J;A6s`Jrr2p%l`,nQ?(CB_ru1aRT6O[K_Y4$0rn+)s?!b\J
-s8C?>I:6NanbrIlk,3i??DR,jrs/;5So@qMh#%!K#P"s\DHgH&r;Q^#o!Oiu>Bf6/rs\eJU3U-H
-@qfLdB8?0Xs"O5]RWMk;?!UZLEJ1:2jQkXVg"Fosl1a`6kMtCKbe^K;DeN`p@V0q-C1_'eA[_@0
-rt=e,P]:;G?[(i9nZ\'oAn#/3nbN1jpr8VDAn5:ol)=W4~>
-o`#6qhl337R[Kr<rqcX1rOd/&%1ERN(Jp@-cJe6cqt/mhBabIK%Kd.JT_RpS-N;o=Q%@Zds7F@;
-TpVIXag?_[g%k[;`jhY!JBmohl,BilL6Ca!rr32g_m>PYW:0`c)Z%jrV2^#FpAb0lh8?4MJ'@Ze
-rRercObC(2rVm)a`3#/RY4;Mk#PZKWT883VqtpBun\qu/Lk"4Xrr32na1@^nNTU6?%/\PiV2p+[
-Ng,rtV=jcd0_il(UQ'_NI<pEsOK-@^n)i]kj5ASXp[RS4j5&80_69B$S!f\.OI;f4R@07s^A%L(
-'(<]HTp_1&OmE&;_6fo(P_c.*q>U`qcFKa=Q].'kW;hA~>
-o`#6sm&bA@AnZ4XqYL4/o^_[uY,e@pZGkP^oAlm+n,)qIb.c]qnc&._lHdfNmJeL0bFE$\j8T)R
-d>r?]DM3^N?+fV)s6HVBB3Sj$rVkNCIUccGm/I"iro']*?X'c,rr3o/\XRSB?/#2Us8'd/F'N>5
-r;ZQ,R<N(I[.aM!#Q<)DHsU*ip&=srn["Qp>^,?0qu6oeV28knEo[/urs%npP@RmUli-nnp:Zu8
->$@)HDJ!EsdJj+E(\4npDI@4VWi`_GcJS-cftXqsXe:!`qu6U*rr)WambP(/EFrcg@#Aq&AclRU
-U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g(a[AR]oKW;hA~>
-o`#6sm&bDAAnZ7YqYL4/o\[]`MhmXjZGkP^oAlp-n,)qIb-/"Z^])(P\u!F@mJeL0bFN*]j8T)R
-d?&E^DM3aO?+fV)s6HYCB3Sm%rVkNDIUccHm/I"iro'`+?X0i-rr3o/\sm\C?J>;Vs8'd/F'N>5
-r;ZQ,R<N(J[.aM!#Q<)EHsU-jp&=srn[+Wq>^5E1qu6oeVMStoF6!9!rs%npP@RmUli-nnp:Zu8
->$@)HDJ!EtdJj+E(\4qqDI@7WWi`_GcJS-cftXqsXe:$aqu6U*rr)WambP+1EFrcg@#Aq&AclRV
-U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g1g\AR]rLW;hA~>
-o`#6sm'rdWR@Bk\qYL4.oOf9T$48nBZGkP^oBO;snb`.Kb#AfZr=/o=%$LAPs!@Ql]oS!0rr;cB
-[%`t\XKIS0^@)"#lbg&sLk4C\rnbDhP_bsurr36&j27pYJ%5.Mru1OP]V((0gACpMqU30RLP"@[
-s7jjNUlgAEpAY'srRnubNe"q<rr35na1@[mNop?<rs.l(Z'pW1j8T&X#4BF=Q%>Fjrr3H$bIsO&
-H'jtfR?j2mrr)j5o#.u.N.\"-XgZ'khsgC!eBZ.V^S]QYrr3`4rV6$Qh7C%fR@&tgR[ok6R?iuB
-p\On&n&Mu4R?N>dlMpCj[%WnPLnsS:rs8DF\YPX[Ng&_+s*t~>
-oD]-ke:VIHBQ8U'qu$I:rTWITVkg?,e)^&okeDar]C5b!rThG=gZ\2"o^'uIp$Mc*p:Z`#M<b-@
-rS<QWAnZ$h=G#B*s8V5ZK4J5,jSo&"Q[*(NPOSSO#Q<&EH<ab,q>UC4n$&$i?#\g&s8V`&S8)8O
-jo5;PZ]K6:A%;=5rs/A=T64CFg%t^J#4&=M@pFuZqYpcaU5*JnGNf#*#3i+C@9ou)rr3GsYa/m*
-FiV=FB4bkDq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)SS`q>Ufm^R]IY@olp:Ir>6t!b[5Xqu7?/
-k-U(`Amef#m/QU[O)\c@@$C-Vrs8D=Q$-bOA9[::s*t~>
-oD]-ke:_OIBQA^*qu$I:rSk;MPaSMbe)^&okeMjt]C5b!rThG+Y.;<a_Rl\Wp$Mc*p:Z`#MX(6A
-rS<TXAnZ$h=G#B*s8V5[K4J5,jSo&"R!E1OPjn\P#Q<&FH<ae-q>UC4n$/*j?#em's8V`&S8)8P
-jo5;PZ]K6:A%;=5rs/A>T64CGg%t^J#4&=M@pFuZqYpcaUPESoGj,,+#3i+C@:$&*rr3GsZ'K!,
-G/qFHB4bnEq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)\Yaq>Ufm^R]IY@ols;J8Y?u!b[8Yqu7?/
-k-^.aAmef$m/QU[O)\c@@$C-Vrs8D>Q$-bOA9d@;s*t~>
-oD]-ke>&FuR\?e"qu$I3rNm"@+BkGPe)^&omF&)'_XIL(rThEe$k<1G!t>ZQp$Mc*p<0t'Rd0qQ
-rS=fSR@Bb/I$*7]s8V6#Xd+TsjSo&*\tt[NV==Ka#Q<;kVM]lSq>UC4n&Dl+LPb$is8V`6]pj_8
-jo5;P`3c8%M88ocrs/AH^S?[:g%t^J#4'78Q%PUnqYpca]W[fdP3DlE#3j.3P(C"1rr3Gs`jqIi
-M9!H.R@0DFq#14/n\DN(Oc\#NjQZ+*qu6<6^TXQ5Tps$rq>Ufmcb?0BP_4CfTUu.N!g]SOqu7?/
-kKU<'R?2ogm/QUl[%WnPLnsS:rs8DF\>5O[PEtI3s*t~>
-oD]3skbrH1ASZOGVsOE^ruh3s_Psrbh<an5ikpgsNPF3?rr<#qkeY$ekje<3d)>MBs!@0?M.*4L
-s8W)ZQ?m4V@TQdJnG`Idd\;/!>_MAAq9"eAAS-kirr35u`hIN\CuG9krs%_dLh'b>l2L\om]Vgb
->`7qJs73CMEFWXdp\t1)oYR8@?>SU"s8W)WVh8D`V"+<]#3hh8Cgq>Hrr36&goH!5?c2X;rsn@p
-N+6(Lk2;MDBOu/=rr2p%nZ@^h@Vk9*rri>h\rUh0Acl_$li-e]')U1eNc&E6<-H<EEFrfrAoc)n
-r;RH,bc6,*A6N-Ao)J6aO)\c@@$C-VrsAJ=OEG/JA9?`.WW.J~>
-oD]3skbrK2ASZOHW9jN_ruh3o[%t+Oh<an5il$q!Nka<@rr<#qkeXC'\\H"nVRQ-`s!@0?M.3:M
-s8W)ZQ[3=W@TQdJnG`Idd\D5">_VGBq9"hBAS6tkrr35u`hRT]D;bBlrs%_dLh'e@l2L\om]Vgb
->`A"Ks73CNEFW[fp\t1)oYR8@?>\[#s8W)WW.SMbV"+<]#3hk9CgqAIrr36&goQ'6?c2X;rsn@p
-N+6(Lk2;MDBOu2>rr2p%nZIdi@Vt?+rri>h\rUh0Acl_$li-e]')U4fNc&E6<HlKGEFrfrAol/o
-r;RH,c)Z;,A6N0Bo)J6aO)\c@@$C-VrsAJ=O`b8KA9Hf/WW.J~>
-oD]3skd-eER%:(W_XRR(ruh3V>_of0h<an5l.*2,SA3eNrr<#qkeTIl%1WjW$tf(ts!@0SZ%oLO
-s8W)ZZDO(YP_"%onG`IdftjYOKU:s'q9cUFR$496rr35udD;Q7LuA72rs%`,Ya'p*l2L\om`)`%
-Jt20,s73t0TTtVPp\t1)oZk7FMMU6js8W)Y`3#2SY4;Ag#3i_%SWf6#rr36&hoMjZK#m]crsnA4
-Z]p$0k2<83R[9K&rr2p%n\;?&PEP/,rri>ja0_K<R0/nXmf*+`')US3Z_!MAH&BY@TUD4:R%Dn-
-r;RH,fZ0t[Q\^!uo)J6r[%WnPLnsS:rsAJF[A0.XQ_!.8WW.J~>
-o)Bg*dtqgLAnlF@S]^I$s82'2fB2Z"kL6u'D0r;*jnJcQrsJYc_8"[ena+Z@na6>[lE,>?]Cl1'
--L%4TCLpdPK&6D)s7jL(H!t'Mn,N:<N,WB>GO5A0rpIXpE+4(Trr36&gSB=->`J.Mru1+#LLXkt
-nc/X]]7k-6BpJ>js8M,mP\afRkPkJdrR%Bf?<t/8qYqf)RXT$_DT;YTs8(!>H=1:<qu?]qiMM68
->cdMc]Qe%$C6\Mmrs/(sK5P7<\,H:*55jQB]74L*AnZ")S^HX!rqc!<cF9']AR88;ZerB<A7]Cg
-DMZI5s8W)mf!pl_ARAAEfD5I:Y`Ed9@UPDiq>Us#c&-IPB4u1McIg^bb5JLCJ,~>
-o)Bg*du%mMAnlFAT$$R%s82'2fB2Z"kL@&)DLAJ,jnJcQrsJYc_6'iM^UpANna6>[lE,>@]Cl1'
--L%7UCLpdPK&6D)s7jL(H!t'Nn,N:<NGrK?GjPJ1rpIXpE+4(Trr36&gSB=->`S4Nru1+#LLXkt
-nc/X]]7k-6C6nMls8M,mP\afRkPkJdrR%Eg?=(59qYqf)Rso-`DT;YTs8(!>H=1==qu?]qiMV<9
-?**Vd]Qn+%C6\Mmrs/(sK5P7<\,H:*55jQB]7=R+AnZ")T$lg#rqc!<cFB-^AR88;ZerB=A7]Cg
-DMZI5s8W)mf!pl_ARAAFfD5I:Y`Ed9@UPDiq>Us#c&6OQB4u1NcIgacbPeUDJ,~>
-o)Bg*e"E%mR%0kP^=i/Xs82'2fB2Z"mGQ<uP`W&jjnJcQrsJYc_*8>;%LihXna6>[lGocU_=dg-
--L%t?SX5:\Ol$!8s7jpTV36P3n,N:<Z_*YOSF$:Urp\=LT9#/urr36&hSQ:UJtDB/ru1+@YEb!S
-nc/X]`NGf"R'-)]s8M92\=J\DkPkJdrReucNe"q<qYqf)[],gaR*bg3s8(?dViZ_hqu?]qj2A$\
-J@+n:_5*KeR^)Yers/)/XIbfI`r5l955jcd_Q'&lR@9\C^#&/Trql3IgsER+R#ZK:\)4upQC+)0
-T<HoFs8W)niR#$+R#ZK?fD5I:_6fo(P_c.*q>Us#d^#L4R@BhYgZ%2BgAS2SJ,~>
-o)Ba/m(IUQ@qB=nJ![1Jce7C<f@J6]Vg;umQbhDFr;-F"qrY`0g$%bO`:<9q#6*J_F)'D)rr4>5
-W.f+u<a*6,rr<#i^n5aYBXIF3ro&]MAnPt[p&*jhVh8bsIHgb2-2YoZH='sZo)Jagd@G\sD6rp8
-s7k,rBP(q$_Ya,_]:+%ZAprqCrs/;6Soe1Bg%tRFEU03?BP2(>lM^"mYDdF1DqY-is8CB@HsL(&
-p\NU&D.[I&_>XE6oYc)fAncbIrVui^c'`OhJ7iA'B4u::SZ]T?_S<LQLiHp0:fES5o@f+9@:a(g
-H'PYSbKe,8P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]JnS_-BPrBkWhXj:p9+FG~>
-o)Ba/m(IXR@qB=nJ![4Ld+[R>f[e?_W-W)oR).MGr;-F"qrY_sXgu'C\+/nd#6*J`F)0J*rr4>5
-W.f+u<a*6,rr<#i^n5aYBXIF3ro&`NAnQ"\p&*jiVh8bsId-k3-2YoZH='sZo)Jagd@PbtDR9$9
-s7k,sBP(q%_Ya,_]UF.[Aq'"Drs/;6Soe1Cg%tRFEU06@BP2(?lM^"mYDdF1E7t6js8CBAHsL+'
-p\NU&DJ!R'_YsN7oYl2hAnceKrVui^cC/akJS/J(B4u::T!,fC_nWURLiHp0:fES5o@f.:@:a(g
-H'Y_Tbg4;:P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]K4nh.BPrBkWhXj:p9+FG~>
-o)Ba/m(f'QPaIr5Wk-3th;mk`iSiSA`MSQHT>B7Nr;-F"qrY^Z$k3XSAb#3g#6*T(U6+()rr4>5
-]<.ZgJ9Sfurr<#ic+g$<OM1;dro'oKR$jP^p\a=.`N>\rT'?7S-2Z3-VN6;8o)JagfY4>OR)&Cp
-s7k-ER[BS?dJNb#d_)KIQ(I7>rs/;D^8$O7g%tRFEU0s,R[KYMmeuV/ag.P'QJDK>s8CWfVi6/O
-p\NUASXGq?dJa+FoZ="uR%()6rVuicgq/okT9bb0R@BkN^<+gRf@8*^Yb78=GB9;0o@fq'P*_T.
-VRXe#gYLQ.\"oCPHul1Jrr;N)[%WnPLnsS:rsnq]W0s!?R\$Rn`knUap9+FG~>
-nc'R)iM^Kt?t<kbFFfLGWNrn2QuunCBp6-WlhUPTrs8Ma_8"[bf>[7Ks(;9#lH6&KFN!>@s8VZ#
-MJQNsK&6D(o^(GHP&OuPU>PtMl(Ds(AT*="XcddEAS,Ll[+3%=oXpK)>?o)?s8Vr8NH&QBIE]p?
-q;R?H@V9bCWMY2mBP(geDm\'3d-e,uA6Na,rqcY7o"B-RA8?UbXdaBWB4YXiRa]EmoY-W)=^g.b
-rp-Y+@qKV2^>dMmfnj<LAp9TQaMOii?&[14CgCFYAS>n&J;9&@Km[`H>uXU'PgK""m_s9V?".A\
-G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXB3\hR@qB=iA7:epY5a"~>
-nc'R)iM^Kt?t<kbFFfLGWj9"4R<E(FC6Q6XlhUPTrs8Ma_6'iJX0hBcs(;9#lH6)LFN!>@s8VZ$
-MelWtK&6D(o^(JIP&OuPU>PtMl(Ds(AT*@$Y**pHAS,Ll[+<.@oXpK)>?o)?s8Vr8NH&QBIEg!A
-q;RBJ@V9bDWMb8oBkCpfDm\*5d-e0!A6Nd-rqcY7o"B0SA8?UcY+0QZB4YXiS(#QpoY-W)=^p4c
-rp-\,@qKV2^>dMmfnsENAp9WRaMXrk?B!:5CgCFYAS>n&J;9&@Km[`H>uXX(Q-f+#m_s<W?".A\
-G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXBO"qS@qB=iA7:epY5a"~>
-nc'R)iNJ<#OHu<*UT:f<`lu]J];(@6JXa7"lhUPTrs8Ma_*8>;$r-6\s(;9'maoFRT$Qg's8VZ-
-Z(6brOl$!7p@74k\"B%Y\E<ejl*-V?R%LS"agRq4QC+&1a5PS)oZOe8LjmD=s8VrAZ_<bSVqKhH
-q;S9;PF8/P`l+mNQ'[l*S]B^>h<r7hQ\C.PrqcX&o#%)_QCY"hah=C>rg7/a\DQ#goZXk7Kn/"X
-rp.%bQ'n5Fd-9EIfqXaoRAILAf[[p/JXOolOc#3bR$sS@Wir\4Y,IqVMgf_kSC$j*m_tEKN0BX"
-Uoq8B^:()5P_j[*Q.,F+s7*h'Q&poVU[e0[%fYUjOc,9aQ'[r1Q&;L1Y5a"~>
-nc'L+p",mS?!CTA?t!MS@pr\J=&s:,]$fg9rUp0qqrY`/eBP_pnc)Gai3TGCAR/\cG-UrEpW.Sa
-:gh?5rqO73TQadJ>$Z,lPPXprG@4QW>$G08OFL_B=^#BOBs$TcB3S;>h#%-Oq9*kc=]o$FBP6f&
-^2mU`r`Tq;CS5cU=]np>C2'g1M.KgeFQ`K"55O#m@p3&?>$>'WQ=jB(=^c&ZNT?L@>>]7urr;`B
-JRDVb>\S1mVWGI1?<^]DBP:jZBq*B3fqN.d>?bE@rEq6b?!C?/;-%Y9dd[58qr>,4?<^T=?X[DR
-@UNJD<)HhTbjYN1s7)^m>$"^$O7E#F"nKol?WgM1=Thf*;NL@Ns*t~>
-nc'L+p",pU?!CTA?t!MS@pr\J=''C.]$fg9rUp0qqrY_rWM?N]nc)GaiO#VEAR/\dGI%,GpW7\c
-:gqE6rqO:5TQadJ>$Z,mPPXprG[OZX>$G08OFLbC=^#BOBs$TcB3S;?h#%-Oq9*nd=]o$FBP?l'
-^2mXar`Tq;CnPoW=]np>C2'g1MIfpfFm&T#55O#nA6N/@>$G-YQ=sH)=^c&[NoZXB>>];!rr;`B
-Jmhed>\S4oVrbR3?<^]DBP:m[C7EK4fqN1e>?bE@rEq6b?!C?/;HIk<dd[58qr>,5?X-c??X[DR
-@UNJD<)HhUbjYN1s7)an>$"^$OR`,G"nKol?WpS2=Thf*;NUFOs*t~>
-nc'L+p"-."K85AFOHG`kQ'.)ZH$+e2]$fg9rUp0qqrY^Z$k+u[nc*5"kKV#QQ].!!UW332pW]Ol
-GC.C"rqOsb^nm-KLl@n"ZMO4<QAC6NLk^D*R$!;]L51hRO1shcQA'R/h#%-Oq9YalL4tJJP)Sku
-^lsS.Lkp_3Jte9^L5(JEPE3H<Y*4EZMWag855O$,MhHkAL4OW0S;i;YL5_=YW8t@QKQVt/rr;`B
-S;W,XMjBou]&gYfKnbMJR@&t_J>(6Pfr9aYKo(eMrK&XlN/3%2F*3/;dd[58qr>2JJqSo;O-,Wj
-PE:]UHZF=pbjYN1s7*LXJ9uQ_TCM^V"nKp)Jpr4KJHUIKF.`!*s*t~>
-nGa:'o@UL#@Tc`5=&r:!<*O-jVSC^HpAOR^#5dQ!\[\s2nc&ag`,8sbrDsP4R.UFUgM'bkOQ-0;
-mYPO[qc>FQG45Cl\:.[a='g0Qa1$"i='KBoY1hojD.[F1jo5;[qr!`H='&mRNP4]TiO!b,<tf%s
-]Zd<l='&U?LT]@gI;<G.R-aYK+TCiPO^M6l>Ap1P`IV;r=(lrVd,:%)An[7ks8W&_]Qa?V)J"5b
-dI?,&I:$&S='K[-]%6?Io@LF+AQW&8r`9J.<)cdtAq$SmhXpdGrtP7f_j,4H='&F(=&r:!<F0sM
-cL(T0rrVc"K`65uJ$AM=rrr>daJ+0"rFQ.II^&CGs*t~>
-nG`^lo@UL#@p8k5$s$>+<Ej6lVSC^HpAOR^#5dQ!Vim_=nc&ag`,B'erE'V6R.UFUgM0knOQ-0;
-mYPR]qcGLSGOPLm\:.^c=C6BTa1$"j=BoTrYM/#lDJ*X5jo5;[qr!`I=BK*VNP4]TiO!e-=;,2!
-]Zd<m=BJgCLTfFhIV`Y2R-aYK+TCiPO^V?o>]?@R`IV>t=D</Yd,:(*B5*Ins8W&_]QjEX)J+;d
-dI?,&IUH8V=Boj/]%6?Io@LF+Am&5:r`9J.<)lk!B7HbohXpdGrtP7f_j,7J='&F(=&r:"<F:'P
-cL(T0rrVc"K`65uJ$AM=rrr>daJ+3$rFZ4JJ$ALHs*t~>
-nG`[ko@UL4J,Xa'H[9mXFEi=sW5$pJpAOR^#5dQ!57013nc&agc]s*,rH8`sWV$5fgQ-Q%S)X>F
-m\bqiqfXW:O73&0\rV,[G']"Ia1@.PG'JS&ZJ+?3LOO]6jo5;[qr"5uG'87gR(r"aiO4XCFq]7c
-]ZdR7G'8+]Pd9$#RY6-?V!RpW:&aV(S:#L'G_;d/`KY^mG(5INd,:gXIXdpSs8W&_^5[>[G(,FI
-eF;G+NdGqjG'J\/]%6?Io@LF7IsH<cH@(!bGBItMIZ12@hXpdGrtP7f_juO.G^4U^H[9jVFaAnF
-cL(T0rrVc+Q2ZR@Nk"ZTrrr>daJY#JrI+j!Nk"Y_s*t~>
-n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!ZG#VprrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e
-YeS]Op\t3lp>sQ-SrS-pGmK4fX16=.meZq]rs/Q"m+&kSOb<RW#)SnWa5?IdrVlroim%JA!mTa"
-p\tBnn(c("rO;sCb2W3!s*t~>
-n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!VmYm]rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e
-YeS]Op\t3lp>sQ-Sr\3rGmSeROK5n6h<t.=rVm-%qWubIYE=M:GmAYPS[6Aoo)8Oe!r1d"rl"r`
-iqW9J"T.ZCb.dha"22k:poaXI~>
-n,EUkpZ'?$SW*N'#`tOY]Zo="q#9a^"oIH!@u'F@rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&KLm
-YeS]Op\t3lp>sQ-U6^Z7L^Ap$R&da>h<t.=rVm-%qWubIYF1IML^/d#TsMeso)8Oe!r1d"rl"r`
-iqW9J"T.ZCb.dha"22k:poaXI~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-%%EndData
-showpage
-%%Trailer
-end
-%%EOF
diff --git a/docs/draknet_advanced_doc.txt b/docs/draknet_advanced_doc.txt
deleted file mode 100644
index a0c0c63e0..000000000
--- a/docs/draknet_advanced_doc.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-This document details the entry points you can call without the DrakX graohical
-toolkit. First, the general variables you will encounter further. If you don't
-know wht a variable is, look here. Any additional locally variables are
-commented 'in place'
-
-------------------------------
-Special types (in upper cases)
-------------------------------
- DB_FILE : file storing the ISDN ISP database. see share/isdndb.txt : file of lines in 'Unlisted - edit manually' or /^(.*)\|(.*)\|(.*)=>([0-9]*)=>(.*)=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/ where $1=Land $2=City $3=ISP_name $4=phone_number $5=hostname $6=dns1 $7=dns2
-
----------------------------------------------------------------------------------------
-Summary of common variables used (local variables are described in the function itself)
----------------------------------------------------------------------------------------
-notation : keys : description : type : format (regexp or enumeration. `...' means it's not exhaustive
- $prefix : prefix path (empty in post-install) : string : path
- $isLaptop : flag for laptop : boolean or int : guess
- $isdn : hash table containing isdn infos
- $isdn->{login} : cnx login : string
- $isdn->{passwd} : cnx passwd : string
- $isdn->{phone_in} : user phone : /^[0-9]*$/
- $isdn->{phone_out} : ISP phone : /^[0-9]*$/
- $isdn->{dialing_mode} : dialing mode : "auto" or "manual"
- $isdn->{driver} : driver used for the card : "hisax" or "b1pci" or ...
- $isdn->{type} : type of card, used for the driver, see netconnect_consts : integer : /^[1-22]|[24-37]$/
- $isdn->{irq} : irq of the ISA card : integer |
- $isdn->{mem} : mem of the ISA card : string |
- $isdn->{io} : io of the ISA card : string | see netconnect_consts for examples.
- $isdn->{io0} : io0 of the ISA card : string |
- $isdn->{io1} : i01 of the ISA card : string |
- $isdn->{idl} : amount of time after the cnx times out in secs : int
- $isdn->{user_name} : not used anymore. Not explicit. It represented the name of the connexion.
- $isdn->{card_type} : card type : string : "isa" or "pci" or "pcmcia"
- $isdn->{protocol} : cnx protocol : int : 1|2|3 : 1 for old german specific (not used anymore), 2 for europe, 3 for rest of the world
- $isdn->{id} : card id. Associated with vendor, identify strictly the card. see pcitable : integer
- $isdn->{description} : card description from pcitable : string
- $isdn->{vendor} : card vendor : integer
- $isdn->{passwd2} : passwd verification : string
- $modem : hash table containing modem infos
- $modem->{device} : device of the modem : string : /ttyS[0-9]/
- $adsl : hash table containing modem infos
- $adsl->{login} : cnx login : string
- $adsl->{passwd} : cnx passwd : string
- $adsl->{atboot} :
- $netc : hash table containing system-wide networking infos (maybe not true, correct this) :
- $netc->{NET_DEVICE}
- $netc->{dnsServer2}
- $netc->{dnsServer3}
- $netc->{DOMAINNAME2}
- $netc->{NET_INTERFACE} is set to "ppp0"
- $in : interactive object
-
-------------
-Entry points
-------------
-
-isdn_write_config_backend : write isdn info, only for ippp0 -> ask_connect_now
-input :
- $prefix
- $isdn
-$isdn input:
- $isdn->{login} $isdn->{passwd} $isdn->{phone_in} $isdn->{phone_out} $isdn->{dialing_mode}
- $isdn->{driver} $isdn->{type} $isdn->{irq} $isdn->{mem} $isdn->{io} $isdn->{io0} $isdn->{io1}
-
-write_secret_backend : write login and passwd into /etc/ppp/{chap, pap}-secrets. Replace old passwd only if same login
-input :
- $a : login : string : /^.*$/
- $b : passwd : string : /^.*$/
-
-connect_backend : launch the cnx script
-input : $prefix
-
-connect_backend : launch the cnx script
-input : $prefix
-
-read_providers_backend : build the tree of isdn ISP
-input :
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-output : the list of ISP : array of strings : array of /^(.*)\|(.*)\|(.*)$/ where $1=Land $2=City $3=ISP_name
-
-get_info_isdn_backend : fills the infos from the line of the tree returned into $isdn and $netc
-input :
- $isdn
- $netc
- $name : the line choosen in the tree of ISP : string : /^(.*)\|(.*)\|(.*)$/ with $1=Land $2=City $3=ISP_name
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-$isdn ouput
- $isdn->{user_name}, $isdn->{phone_out}, $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3},
-$netc output
- $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3}
-
-isdn_detect_backend : detects isdn pci card and fills the infos in $isdn : only detects one card
-input
- $isdn
-$isdn output:
- $isdn->{description} $isdn->{vendor} $isdn->{id} $isdn->{driver} $isdn->{card_type} $isdn->{type}
-
-isdn_get_list : return isdn cards descriptions list. This function is not use internally.
-output : descriptions : list of strings
-
-isdn_get_info : return isdn card infos. This function is not use internally.
-input : the description of the card (see isdn_get_list)
-output : a reference on the decription of the card. : ref on a hash(description,type,irq,mem,io,io0,io1card,)
-
-conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling setup_thiskind($in, 'net', !$::expert, 1) or setup_thiskind_backend before calling this function. Basically, you call this function in 2 times.
-input
- $prefix
- $netc
- $intf
- $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
- $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
- $ipadr : facultative, ip address of the interface : string
- $netadr : facultative, netaddress of the interface : string
-when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-$intf output: $device is the result of
- $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
- $intf->{$device}->{BOOTPROTO} : $type
- $intf->{$device}->{NETMASK} : '255.255.255.0'
- $intf->{$device}->{NETWORK} : $netadr
- $intf->{$device}->{ONBOOT} : "yes"
-$netc output:
- $netc->{nb_cards} : nb of ethernet cards
- $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-output:
- $all_cards : a list of a list ( (eth1, module1), ... , (ethn, modulen)). Pass the ethx as $interface in further call.
- $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-
-adsl_conf_backend : write adsl configuration
-input :
- $prefix
- $adsl
- $netc
- $adsl_type : type of cnx : string : "pptp" or "pppoe"
-$adsl input:
- $adsl->{login}, $adsl->{passwd}, $adsl->{atboot}
-$netc input:
- $netc->{NET_DEVICE}
- $netc->{dnsServer2}
- $netc->{dnsServer3}
- $netc->{DOMAINNAME2}
-$netc output:
- $netc->{NET_INTERFACE} is set to "ppp0"
-
-modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card
-input
- $modem
- $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ )
-output:
- $modem->{device} : device where the modem were detected
-
-get_net_device : return the device choosen for the net cnx
-no input
-output : name of the internet device.
-
-read_net_conf : read the information stored in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
-input:
- $prefix
- $netcnx
- $netc
-
-set_net_conf : set the information from netcnx in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
- $prefix
- $netcnx
- $netc : useless! REMOVE ME
diff --git a/docs/interactive/ask_from b/docs/interactive/ask_from
deleted file mode 100755
index dad69247e..000000000
--- a/docs/interactive/ask_from
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-
-my $irq=1;
-my $login;
-my $login2="editable";
-my $check;
-my $range=57;
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-$in->ask_from("window title - ask_from",
- "message\nexamples of utilisation of ask_from",
- [
- { label => "enter scalar", val => \$irq },
- { label => "combo (type=>combo optionnal)", val => \$login, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], type => 'combo'},
- { label => "choose from list editable and sorted", val => \$login2, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], not_edit => 0, sort => 1},
- { label => "check box", val => \$check, type => "bool", text => "text" },
- { label => "range", val => \$range, type => 'range', min => 0, max => 100 },
- ],
- complete => sub { print "complete\n";print "$irq\n$login\n$range\n"; },
-# focus_out => sub { print "focus_out\n"},
-# changed => sub { print "changed\n"; },
- ) or $in->exit(0);
-$in->exit(0);
diff --git a/docs/interactive/ask_from_list b/docs/interactive/ask_from_list
deleted file mode 100755
index 63c0ee996..000000000
--- a/docs/interactive/ask_from_list
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use interactive;
-
-my %l = (
- 0 => "Welcome To Crackers",
- 1 => "Poor",
- 2 => "Low",
- 3 => "Medium",
- 4 => "High",
- 5 => "Paranoid",
- );
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-my $level = $in->ask_from_list("window title - ask_from_list",
- "radio button\nexamples of utilisation of ask_from_list",
- [ values %l ], $l{2}
- ) or $in->exit(0);
-
-print "$level\n";
-$in->exit(0);
-
diff --git a/docs/interactive/ask_from_listf b/docs/interactive/ask_from_listf
deleted file mode 100755
index 077540b49..000000000
--- a/docs/interactive/ask_from_listf
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use Data::Dumper;
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-my @m=(
- { description => "dhcpcd",
- c => 1},
- { description => "dhcpxd",
- c => 3},
- { description => "dhcp-client",
- c => 4},
- );
-my $f = $in->ask_from_listf(_("ask_from_listf"),
- _("Which dhcp client do you want to use?\nDefault is dhcpcd"),
- sub { $_[0]{description} },
- \@m );
-
-print Data::Dumper->Dump([$f],['f']) . "\n";
-
-$in->exit(0);
-
diff --git a/docs/interactive/ask_from_treelist b/docs/interactive/ask_from_treelist
deleted file mode 100755
index ade7141d4..000000000
--- a/docs/interactive/ask_from_treelist
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use interactive;
-
-my $in = 'interactive'->vnew(undef, 'default');
-my $foo = $in->ask_from_treelist("window title - ask_from_treelist",
- "message\nexamples of utilisation of ask_from_treelist",
- '|',
- ['Custom',
- 'Other|Unlisted',
- 'Matrox|Millennium II=>Matrox Millennium II',
- 'Matrox|Millennium G200=>Matrox Millennium G200',
- 'Matrox|Millennium G400=>Matrox Millennium G400',
- 'Matrox|Millennium G450=>Matrox Millennium G450',
- 'Matrox|Millennium G550=>Matrox Millennium G550',
- 'Sun|FFB 67MHz Creator=>Sun FFB 67MHz Creator',
- 'Sun|FFB 67MHz Creator 3D=>Sun FFB 67MHz Creator 3D',
- 'Sun|FFB 75MHz Creator 3D=>Sun FFB 75MHz Creator 3D',
- ],
- 'Custom'
- ) or $in->exit(0);
-print "$foo\n";
-$in->exit(0);
diff --git a/docs/interactive/wait_message b/docs/interactive/wait_message
deleted file mode 100755
index 0caec4471..000000000
--- a/docs/interactive/wait_message
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-
-my $in = 'interactive'->vnew(undef, 'default');
-my $wait = $in->wait_message('wainting title', _("Moving files to the new partition"));
-sleep(3);
-$wait->set(_("Removing"));
-sleep(3);
-$in->exit(0);
diff --git a/docs/mdk-vs-redhat b/docs/mdk-vs-redhat
deleted file mode 100644
index 4d0de8223..000000000
--- a/docs/mdk-vs-redhat
+++ /dev/null
@@ -1,43 +0,0 @@
-+ Open Development (at least DrakX)
-+ UDMA66 (HPT366)
-+ gamerz
-+ number of packages
-+ better packages(?)
-+ no automatic handling of ide burners
-+ urpmi/rpmdrake
-+ XFdrake
-+ no newbie install
-+ reiserfs
-+ fat resizing
-+ 3D handling (eg: Voodoo3)
-+ diskdrake (vs diskdruid)
-+ usb storage (?)
-+ KDE2
-+ faces in kdm/gdm
-+ menu
-+ alternatives
-+ /etc/emacs/site-start.d
-+ default config
-+ i18n (bootloader keyboard)
-
-+ More user-friendliness in general:
- + you can choose between multiple net devices when more than one are
- detected
- + you are presented with the media descriptions (disks, cdrom's)
- when you must choose between multiple media, and not only "sda",
- "hdc", ..
- + when installing from a disk partition, you are presented with an
- extract of the directory contents when you fail to give the
- correct location, which is very helpful to correct the input
- instead of simply rebooting to remember where on earth you
- mirrored the distribution on your disks
-
-+ Automatic mode (Redhat's equivalent is called "kickstart") is not
- performed according to a file on the floppy but from kernel parameters,
- which have many pros, among them: (1) we don't need the vfat filesystem
- for that purpose, and (2) with advanced bootloaders such as grub and
- lilo you can edit parameters on the fly at boot time.
-
-- no LABEL= in fstab (for auto renumbering of devices)
-- kerberos
-- LDAP
diff --git a/docs/net_object_class.fig b/docs/net_object_class.fig
deleted file mode 100644
index 19f7f5318..000000000
--- a/docs/net_object_class.fig
+++ /dev/null
@@ -1,73 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter
-100.00
-Single
--2
-1200 2
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4050 4162 675 338 4050 4162 4725 4500
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 5700 3112 675 338 5700 3112 6375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 7275 4087 675 338 7275 4087 7950 4425
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4800 1462 975 487 4800 1462 5775 1950
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 2700 3112 675 338 2700 3112 3375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4875 5887 975 487 4875 5887 5850 6375
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 9450 5062 675 338 9450 5062 10125 5400
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4654 4038 3900 3225 4654 4038 754 813
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 4125 1875 3225 2850
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 4575 1950 4200 3750
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 5250 1950 5475 2775
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 3000 3450 3600 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 5925 3450 6675 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 2700 3450 4050 5550
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 4125 4500 4575 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 5625 3450 5025 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 5775 1575 9450 4725
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 7800 4275 9000 4800
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 4800 1950 4800 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 9000 975 9450 4725
-2 2 0 1 0 7 50 0 -1 0.000 0 0 -1 0 0 5
- 7500 75 10687 75 10687 975 7500 975 7500 75
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 7500 375 5400 1050
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
- 0 0 1.00 60.00 120.00
- 5550 1800 7200 3675
-4 0 0 50 0 0 12 0.0000 4 135 885 4350 1500 Netconnect\001
-4 0 0 50 0 0 12 0.0000 4 135 435 2475 3150 ISDN\001
-4 0 0 50 0 0 12 0.0000 4 135 720 3675 4200 MODEM\001
-4 0 0 50 0 0 12 0.0000 4 135 960 6825 4125 ETHERNET\001
-4 0 0 50 0 0 12 0.0000 4 135 480 5400 3150 ADSL\001
-4 0 0 50 0 0 12 0.0000 4 135 420 4650 5925 Tools\001
-4 0 0 50 0 0 12 0.0000 4 135 660 9150 5100 Network\001
-4 0 0 50 0 0 12 0.0000 4 135 1305 8400 375 Rest of the world\001
-4 0 0 50 0 0 12 0.0000 4 180 2595 7725 600 (draknet, printerdrake, tinyfirewall\001
-4 0 0 50 0 0 12 0.0000 4 180 2310 7725 825 ftp, http, net_monitor, drakgw)\001
-4 0 0 50 0 0 12 0.0000 4 195 2760 3525 6825 Global variables $in, $prefix, $install\001
-4 0 0 50 0 0 12 0.0000 4 180 2340 3525 7050 shared with the module globals\001
diff --git a/docs/object_class.fig b/docs/object_class.fig
deleted file mode 100644
index 44fd3fe89..000000000
--- a/docs/object_class.fig
+++ /dev/null
@@ -1,32 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter
-100.00
-Single
--2
-1200 2
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
- 2625 1200 2625 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
- 7575 1125 7575 1650
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
- 7575 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
- 5025 2025 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
- 2625 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
- 5025 2025 6075 4125
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
- 2625 1200 4950 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
- 7575 1125 4950 1725
-4 0 0 100 0 0 12 0.0000 4 180 1755 1800 1050 install_steps_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1440 6900 975 install_steps_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1140 2100 1950 interactive_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1275 6900 1950 interactive_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1875 4125 1950 install_steps_interactive\001
-4 0 0 100 0 0 12 0.0000 4 135 810 3975 3450 interactive\001
-4 0 0 100 0 0 12 0.0000 4 180 975 5625 4350 install_steps\001
diff --git a/docs/spec-DrakX-8.0.html b/docs/spec-DrakX-8.0.html
deleted file mode 100644
index 3fd545447..000000000
--- a/docs/spec-DrakX-8.0.html
+++ /dev/null
@@ -1,405 +0,0 @@
-<html><head><title>DrakX Specification for Linux-Mandrake 8.0</title></head>
-<body bgcolor="#FFFFFF" link="#0066FF" vlink="#0066FF" alink="#FF0000">
-<table border="0" cellpadding="0" cellspacing="0" width="100%">
-<tr>
-<td bgcolor="#99AAFF"><h2 align="left">DrakX Specification for Linux-Mandrake 8.0</h2></td></tr>
-<tr><td valign="top">
-Current team of Install group is :
-<p>
-<table cellpadding="2" cellspacing="2" border="1" width="30%">
-<tbody>
-<tr valign="Top">
-<td valign="Top">gc
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">damien
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">fpons
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">pixel
-
-</td>
-</tr>
-</tbody>
-</table>
-<p>
-
-<pre>
-
- <b>Boot process (stage1)</b>
-
- Installation begin by booting from CD-ROM or Diskette. From CD-ROM all
-installation method are available (CD, HD, NFS, FTP, HTTP) on options. From
-Diskette according to image selected, only some related method (network or cdrom
-or hd) are available and module managed due to size limitation to 1.44Mb.
- Options are always available by pressing on F1.
-
- <b>DrakX process (stage2)</b>
-
- DrakX installation organized in steps (execution sequence described below).
-Steps listed on left side and help available on bottom right side. most of the
-screen is available for various dialog for interacting with the user. Steps
-execution sequence is automated and described below.
-
-Mouse is probed and if none has been found or if the mouse has not moved, a
-specific mouse configuration is displayed at the begining.
-
-
-Before the graphical steps, there is a detection step. It detects various
-hardware, including modems (from tty0 to tty7), mouse (serial, usb, ps/2) and
-tablets.
-
- <b>Steps</b>
-
- <i>Choose Your language</i>: step always displayed. default choice is previous one or
-<font color="#000080"><i>English</i></font>. After choosing a language, a license splash screen translated in the
-chosen language is displayed with <font color="#000080"><i>Accept</i></font> and <font color="#000080"><i>Refuse</i></font> buttons. <font color="#000080"><i>Refuse</i></font> should
-stop installation. <font color="#000080"><i>Accept</i></font> validate language choice which are propagated to all
-DrakX visible widget. Advanced mode allow to select other language available to
-be installed. Advanced mode allow to select language which will be installed on
-system.
- If step is redone, the license is no more displayed.
-
- <font color="#000080"><i>Select Install Class</i></font>: step always displayed. default choice is previous one
-or <font color="#000080"><i>Recommended</i></font>. Only one other option available is <font color="#000080"><i>Customized</i></font>. Two buttons
-available are <font color="#000080"><i>Install</i></font> or <font color="#000080"><i>Upgrade</i></font>. Available steps (left side) are changed
-according to installation class selected, where the default is the one of
-<font color="#000080"><i>Recommended</i></font> with <font color="#000080"><i>Install</i></font>.
-
- <font color="#000080"><i>Hard Drive Detection</i></font>: step always displayed. In recommended mode,
-automatically done. In Customized mode, all modules that manage SCSI/IDE cards
-are loaded automatically and a question asking for other module to load is
-displayed.
- If clicked later or if to the question to load other module the
-answer is <font color="#000080"><i>Yes</i></font>, a list of module is displayed (or if the question to other
-module to load is. When a module is chosen, two options are available
-<font color="#000080"><i>Autoprobe</i></font> and <font color="#000080"><i>Specify options</i></font>. Autoprobe try to load the module without any
-other user options (default module parameter). Specify options allow user to
-give module parameters individually in a list for all known parameters. At this
-point <font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> are available, Cancel should stop the module installation
-and go to next step. If any error occurs during module installation, a question
-asking to try with other parameter is displayed, the same module is still used.
-
- <font color="#000080"><i>Setup filesystems</i></font>: step always displayed. display a list of available choice
-accoding to what has been probed. May contains <font color="#000080"><i>Use free space</i></font>, "Use existing
-partition<font color="#000080"><i>, </i></font>Use the window partition for loopback<font color="#000080"><i>, </i></font>Use the free space on the
-Windows partition<font color="#000080"><i>, </i></font>Remove Windows(TM)<font color="#000080"><i>|</i></font>Erase entire disk" (according to disk
-configuration =&gt; only one big fat for the first case only), "Custom disk
-partitioning".
- If <font color="#000080"><i>Use free space</i></font> mode, auto allocation in available on available disk.
- If <font color="#000080"><i>Use existing partition</i></font> mode, a list of partition named in Linux
-scheme are displayed with their approximate size in Mb and propose mount point
-to choose in list boxes for each partitions available on hard drive.
- If <font color="#000080"><i>Use the window partition for loopback</i></font> mode, DrakX use available size
-on the windows partition to create a root file and a swap file which will be
-used in loopback, this means this is a lnx4win installation.
- If <font color="#000080"><i>Use the free space on the Windows partition</i></font> mode, DrakX will resize
-the windows partition and allocate true linux filesystem (at least / and swap).
- If <font color="#000080"><i>Remove Windows(TM)</i></font>|<font color="#000080"><i>Erase entire disk</i></font> mode, DrakX clean the
-partition table before auto allocating partition.
- If <font color="#000080"><i>Custom disk partitioning</i></font> mode, diskdrake is launch. TO BE DEFINED to
-change make diskdrake use only advanced mode.
-Diskdrake show all partition of all non-removable disk graphically. All special
-partition are hidden, only user accessible partition are visible: this remove
-extended partition, whole disk partition on sparc platform. Clicking on a disk
-notebook tab show all his partitions. Clicking on a partition show all actions
-available for this partition (depend if customized or advanced mode) as well as
-information on this partition (depend if customized or advanced mode). Most
-diskdrake operation are done without writing on disk (exception are Resizing
-partitions) and everything is written once on the disk when exiting diskdrake,
-at any time if writing partition table is necessary, there are always a dialog
-box asking the user to confirm the write. If no operation are modifying
-partition table, no dialog is displayed on exit (for example if giving mount
-point to partition). General action are available too:
- <font color="#000080"><i>Clear All</i></font>: clear all partition of the given disk.
- <font color="#000080"><i>Auto allocate</i></font>: try to allocate partition in available disk (not the
-seen disk).
- <font color="#000080"><i>Undo</i></font>: undo last operation.
- <font color="#000080"><i>Done</i></font>: quit and save changes.
-Other operations are available in advanced mode:
- <font color="#000080"><i>Rescue partition table</i></font>: try to rescue a lost partition table,
-absolutely no garantee to succeed and may destroy what could be saveable by
-another tools.
- <font color="#000080"><i>Reload</i></font>: reload partition table from disk, erasing all changes in
-memory done by the user.
- <font color="#000080"><i>Wizard</i></font>: go to partition wizard, that the partition filesystems default
-behaviour on startup.
- <font color="#000080"><i>Restore from floppy</i></font>: restore a partition table from previously saved
-partition table from diskdrake.
- <font color="#000080"><i>Save to floppy</i></font>: save partition table to floppy.
- <font color="#000080"><i>Options</i></font>: global options available for filesystem configuration. This
-include <font color="#000080"><i>Removable media automouting supermount</i></font> check box disabled by default.
- Operation available on partition are:
- <font color="#000080"><i>Mount point</i></font>: change or define mount point for partition, only
-available for true filesystem partition.
- <font color="#000080"><i>Resize</i></font>: resize partition, if a specific algorithm to keep data is
-used no data may be lost, else all data are lost but nothing is written by
-diskdrake on the partition data in this last case (this means data can be
-restored by restoring original size and location).
- <font color="#000080"><i>Delete</i></font>: delete partition, if the same partition is created (same type,
-location, size) all data can be restored as diskdrake doesn't write on partition
-data.
- Operation available on partition table but in advanced mode are:
- <font color="#000080"><i>Type</i></font>: change type of partition, all data will be lost but diskdrake as
-above does not destroy them, and everyting can be restored.
- <font color="#000080"><i>Format</i></font>: format partition, at this point, all data ARE LOST.
- <font color="#000080"><i>Mount</i></font>: mount partition now, usefull for swap to increase memory
-capacity for machine low on resource that are not available to complete setup
-filesystem step correctly (problably if a resize partition is used on FAT fs).
-allow Mounting swap on customized mode too.
- A legend for partition type colors is available
-(Ext2,ReiserFS,Swap,FAT,Other,Empty). It has additionnal features to create a
-partition or change its type (only available in advanced mode).
-
- <font color="#000080"><i>Format partitions</i></font>: step always displayed. display list of partition to
-format with click boxes. Some are defined according to type of partitions and if
-the partition has been created or taken back.
-If a partition has already been formated, it is not proposed, or if it should
-not be proposed (alrady existing partition like /mnt/windows).
-On Advanced tag, an additional dialog is displayed to select partition to format
-(all available partition listed) and to format them with bad block checking.
-
- <font color="#000080"><i>Choose packages</i></font>: step always displayed. default selection done to be
-<font color="#000080"><i>correct</i></font> according to size available, Install or Upgrade, Hardware available.
-This selection is done according to <font color="#000080"><i>Mandrake first choice</i></font> of packages.
-On all mode, display groups and main desktop used (KDE or Gnome), an
-individual package selection check box is available to allow selecting package
-individually. In this case, a dialog displaying a tree with groups, (Mandrake
-first choice/alternatives) and packages is shown on the left part, a description
-window for each packages is shown on the right part.
-
- <font color="#000080"><i>Install system</i></font>: step always displayed. no interactive and display
-installation progression. include if available and on a CD basis a spash screen
-of advertising and other (pub!).
-
- <font color="#000080"><i>Hardware panel</i></font>: step always displayed. show current configuration for
-Mouse, Keyboard, TimeZone, Graphic/TV Card, Monitor.
-At each values chosen (list boxes displayed a
-synthesis description) the current dialog is removed from screen and specific
-configuration panels are displayed (like currently for mouse, keyboard ...).
-And end of these specific configuration panels, this one is remapped on screen
-to be accepted in general.
-
- <b>Sub steps of Hardware panel:</b>
-
- <font color="#000080"><i>Configure mouse</i></font>: displayed on request or if the mouse has not been
-moved (so unsafe detection), but have to be displayed earlier. A mouse tree
-selection for type is displayed with default case as what is probed or
-<font color="#000080"><i>serial/Generic 2 button Mouse</i></font> if none has been probed. <font color="#000080"><i>Cancel</i></font> disable mouse
-modification and <font color="#000080"><i>Ok</i></font> allow next mouse configuration dialog. Then comes a serial
-port dialog for serial mice (default mouse connected to COM1 if nothing found).
-Then a mouse screen control is chown (according to mouse capacity: 3 buttons
-with or without mouse, need 7 buttons checking ?). Here <font color="#000080"><i>Ok</i></font> validate to go to
-next step and <font color="#000080"><i>Cancel</i></font> to first mouse dialog displayed (mouse tree selection for
-type).
-
- <font color="#000080"><i>Configure keyboard</i></font>: displayed on request. default is set according to
-TimeZone definition (itself defaulting to language selection at the beginning).
-A list of keyboard is shown to the user and <font color="#000080"><i>Ok</i></font> validates change and return to
-<font color="#000080"><i>Hardware panel</i></font> dialog with enabled change. <font color="#000080"><i>Cancel</i></font> abort any modification and
-return to the same <font color="#000080"><i>Hardware panel</i></font> dialog.
-
- <font color="#000080"><i>Configure timezone</i></font>: displayed on request. default is set according to
-language selection. A timezone tree selection is shown with only the subtree
-corresponding to the current selection expanded (as other tree dialog). <font color="#000080"><i>Ok</i></font>
-validates change and return to <font color="#000080"><i>Hardware panel</i></font> dialog whereas <font color="#000080"><i>Cancel</i></font> avoid
-the change before returning to the same main dialog.
-
- <font color="#000080"><i>Graphic Card</i></font>: display graphic card probed. No change available.
-
- <font color="#000080"><i>TV Card</i></font>: display TV/Tuner card probed. No change available.
-
- <font color="#000080"><i>Monitor</i></font>: need execution of ddcxinfos at this point. Only Size, Max
-resolution and depth displayed. No change available.
-
-
- Miscellaneous step have been removed and dispatched to other steps. "Use
-hard drive optimisation<font color="#000080"><i> and </i></font>Enable num lock at startup<font color="#000080"><i> are removed. </i></font>Choose
-security level<font color="#000080"><i> is moved to security step. </i></font>Precise RAM size if needed" and
-<font color="#000080"><i>Clean /tmp at each boot</i></font> are moved to bootloader step.
-<font color="#000080"><i>Removable media automouting</i></font> is moved to diskdrake options.
-
- <font color="#000080"><i>Security</i></font>: step displayed only in customized mode. TO BE DEFINED. should
-display at least securty level to choose. level are <font color="#000080"><i>Low</i></font>, <font color="#000080"><i>Medium</i></font>, <font color="#000080"><i>High</i></font> and
-for advanced there are <font color="#000080"><i>Welcome To Crackers</i></font>, <font color="#000080"><i>Poor</i></font>, <font color="#000080"><i>Paranoid</i></font> too.
-
- <font color="#000080"><i>Configure networking</i></font>: step always displayed. dialog always displayed in
-both <font color="#000080"><i>Recommended</i></font> and <font color="#000080"><i>Customized</i></font> mode. A list of network configuration
-entries are shown with the following:
- <font color="#000080"><i>Configure a normal modem connection</i></font>
- <font color="#000080"><i>Configure an ISDN connection</i></font>
- "Configure a DSL (or ADSL) connection
- <font color="#000080"><i>Configure a cable connection</i></font>
- <font color="#000080"><i>Configure local network</i></font>|<font color="#000080"><i>Reconfigure local network</i></font>
- <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font>
- <font color="#000080"><i>Done</i></font>
- By cliking on a specific item, another dialog is displayed to configure
-some specific part of the network.
- <font color="#000080"><i>Configure a normal modem connection</i></font>: display a question to probe for a
-modem if not already detected, then if none are found or probe has been refused
-a list of possible serial device are listed (in the form ttySx / COM(x+1) with
-the current mouse device removed if it is serial). After that a dialog including
-all parameters than can be used is shown. This includes <font color="#000080"><i>Connection Name</i></font>,
-<font color="#000080"><i>Phone number</i></font>, <font color="#000080"><i>Login ID</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Authentication</i></font>, <font color="#000080"><i>Domain name</i></font>, <font color="#000080"><i>DNS 1</i></font>
-and <font color="#000080"><i>DNS 2</i></font>. Authentication is a combo of <font color="#000080"><i>PAP</i></font>, <font color="#000080"><i>Termina-Based</i></font> and
-<font color="#000080"><i>Script-Based</i></font> (It seems necessary to get CHAP back on this one, no way of
-testing TO BE DEFINED). If no DNS are given, the connection is configured to try
-using provider DNS. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> button are available.
- <font color="#000080"><i>Configure an ISDN connection</i></font>:
-Try to detect some PCI card. If not detected, asks if it's a ISA/pcmcia or PCI
-card, and gives the list of the cards. Information are then asked:
-<font color="#000080"><i>Card IRQ</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card mem (DMA)</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card IO</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card IO_0</i></font> only if ISA/pcmcia with io0
-<font color="#000080"><i>Card IO_1</i></font> only if ISA/pcmcia with io1
-<font color="#000080"><i>Your personal phone number</i></font> phone
-<font color="#000080"><i>Provider name (ex provider.net)</i></font>
-<font color="#000080"><i>Provider phone number</i></font>
-<font color="#000080"><i>Provider dns 1</i></font>
-<font color="#000080"><i>Provider dns 2</i></font>
-<font color="#000080"><i>Dialing mode</i></font> auto or manual
-<font color="#000080"><i>Account Login (user name)</i></font>
-<font color="#000080"><i>Account Password</i></font> hided
-<font color="#000080"><i>Confirm Password</i></font> again
- <font color="#000080"><i>Configure a DLS (or ADSL) connection</i></font>:
-The user chooses between pptp, pppoe and dhcp. If dhcp, redirection to LAN.
-If there is more than one ethernet card, The user must choose the card to use
-(displayed with the module). After that, some informations are asked:
-<font color="#000080"><i>Provider name (ex provider.net)</i></font>
-<font color="#000080"><i>Provider dns 1</i></font>
-<font color="#000080"><i>Provider dns 2</i></font>
-<font color="#000080"><i>Account Login (user name)</i></font>
-<font color="#000080"><i>Account Password</i></font> hided
-<font color="#000080"><i>Confirm Password</i></font> again
- <font color="#000080"><i>Configure a cable connection</i></font>: redirection to LAN
- <font color="#000080"><i>Configure local network</i></font>: display what has been probed with a question
-about using another module and <font color="#000080"><i>Yes</i></font>, <font color="#000080"><i>No</i></font> and <font color="#000080"><i>See hardware info</i></font> buttons.
-<font color="#000080"><i>No</i></font> is the default. If <font color="#000080"><i>Yes</i></font> is clicked a list of modules is displayed with
-<font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> buttons available. <font color="#000080"><i>Cancel</i></font> should go back to previous
-question. If <font color="#000080"><i>See hardware info</i></font> is clicked a list of probed hardware is
-displayed. If <font color="#000080"><i>Yes</i></font> is clicked, for each ethernet interface, a dialog asking for
-IP address, Netmask and Automatic IP check box (DHCP/BOOTP) is displayed. Then
-if DHCP has been chosen, only a dialog asking for Host name and another for HTTP
-proxy and FTP proxy if any. If DHCP has not been chosen, an IP address has to be
-defined and a dialog including <font color="#000080"><i>Host name</i></font>, <font color="#000080"><i>DNS server</i></font>, <font color="#000080"><i>Gateway</i></font> and "Gateway
-device" is displayed. Then the same HTTP proxy and FTP proxy dialog as above. As
-network configuration may to have been reworked a bit it has TO BE DEFINED if
-this is kept like that or not.
- <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> is just a way to toggle
-networking on or off, may be to be accessible only for advanced mode.
- <font color="#000080"><i>Quit</i></font> exit the network step.
-
-<b>NETWORK ADVANCED DOCUMENTATION:</b>
-Here is a list of entry points available in post install without using the ugly
-install graphic toolkit:
-
-<a href=<font color="#000080"><i>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</i></font>>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</a>
-
- <font color="#000080"><i>Configure Printer</i></font>: step always displayed. In recommended mode, only
-activated if a local printer is detected, else no printer are configured by
-default. In customized mode or if the step has been clicked a list of printer
-already configured is displayed and the possibility to add or exit the
-configuration. It allow configuration of printers for both LPR and CUPS
-individually (available by advanced mode when adding a printer). Printer
-protocol managed are local/usb/samba/ncp/lpd for LPR and
-local/usb/serial/samba/lpd/cups_network for CUPS.
-
- <font color="#000080"><i>Set root password</i></font>: step always displayed for Install only. In
-recommended mode display only a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry
-to select the root password. In advanced mode, a Use NIS (yellow pages) check
-boxes and Use MD5 check box are available. <font color="#000080"><i>Ok</i></font> validate root password and "No
-password<font color="#000080"><i> avoid setting a password. </i></font>No password<font color="#000080"><i> is only available in </i></font>Low"
-security level or less. The length of the minimal password depend upon security level.
-
-In corporate firewall :
- <font color="#000080"><i>Set admin password</i></font>: step always displayed for Install only. It only
- displays a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry
-to select the admin password.
-The length of the minimal password depend upon security level. (double of the
- security level)
-
- <font color="#000080"><i>Add a user</i></font>: step always displayed for Install Only. In recommend mode
-display <font color="#000080"><i>Real name</i></font>, <font color="#000080"><i>User name</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font> and icon
-choices as graphical. For customized mode a shell combo is available to choose a
-specific shell for the user depending on the package installed. The real name is
-the user friendly name of the user whereas user name is its login id name. The
-box display user that have already been added below the title. <font color="#000080"><i>Accept user</i></font>
-button allow the creation of the user and <font color="#000080"><i>Done</i></font> finish this step. High or
-higher security level implies the creation of at least one user. Password length
-are subject to same restriction according to security level. In advanced mode,
-allow to choose the user in auto login mode.
-
- <font color="#000080"><i>Create a boot disk</i></font>: step always displayed. In recommended mode this
-step is automatically done by doing nothing. If clicked or customized mode, the
-user is prompted to allow building a boot disk (default is yes). In advanced
-mode allow selection of floppy drive.
-
- <font color="#000080"><i>Install boot loader</i></font>: step always displayed. In recommended mode this
-step is automatically done. In customized mode, a combo <font color="#000080"><i>Boot device</i></font> list the
-various boot device that can be used where the bootloader can be installed. The
-boot device can the Linux description of the whole disk available (ex: /dev/hda)
-or partition available in these disk or floppy drives. Other platform
-specificity are not listed here.
- LBA check box is displayed in advanced mode (enabled by default) to
-allow using LBA addressing if available (PC with LILO). bootloader combo to
-select a given bootloader to use, available choice are <font color="#000080"><i>Grub</i></font>, "LILO with text
-menu<font color="#000080"><i>, </i></font>LILO with graphical menu<font color="#000080"><i>. default chosen is </i></font>LILO
-with graphical menu<font color="#000080"><i>. </i></font>Delay before booting default image" entry
-field is available with default value current setting (upgrade) or 5 else.
-<font color="#000080"><i>Precise RAM size if needed (found xx MB)</i></font> entry is displayed too,
-<font color="#000080"><i>clean /tmp</i></font> check box is disabled by default too.
-Boot in graphical mode (init 5) is available here in advanced mode too
-(previously in X configuration). <font color="#000080"><i>Video mode</i></font> combo, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font>,
-<font color="#000080"><i>Restrict command line options</i></font> check box is displayed.
-Video mode combo list text mode and video mode used for frame buffer, video mode
-used for frame buffer are available only if the install managed to boot with
-frame buffer activated. Password are restricted according to security level as
-other password. Password are mandatory according to security level TO BE DEFINED.
-
- <font color="#000080"><i>Configure X</i></font>: step always displayed. By default on recommended mode,
-everything is done automatically if possible up to test of graphic card, and if
-the user accept the settings no more question are asked to him. In customized
-mode a dialog is displayed to choose resolution, color depth and which version
-of XFree (with 3D optionally) is available for the current card where only a
-short description is displayed. <font color="#000080"><i>Ok</i></font> button allow to jump to test phase (for the
-first time only) if available. <font color="#000080"><i>Cancel</i></font> return to main XFree configuration
-window allowing to change Monitor, Graphic card, Server options or Resolution
-with X version to choose. <font color="#000080"><i>Show all</i></font> extend resolution list to more resolutions
-according to card (with onboard memory) only and no more monitor capabilities.
- The main dialog is a list of command to change some X configuration aspect
-according to advanced mode or not :
- <font color="#000080"><i>Change Monitor</i></font>: display a tree selection of monitors where default one
-is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available.
- <font color="#000080"><i>Change Graphic card</i></font>: display a tree selection of graphic card where
-default one is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. If <font color="#000080"><i>Unlisted</i></font>
-is chosen, then a tree of server/driver is displayed containing available server
-for XF3 or driver for XF4. <font color="#000080"><i>Cancel</i></font> return to main window and <font color="#000080"><i>Ok</i></font> validates
-change.
- <font color="#000080"><i>Change Server options</i></font>: available only in advanced mode. display list
-of check boxes options for server currently used. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> available.
- <font color="#000080"><i>Change Resolution</i></font>: change resolution and depth including with X server
-version chosen (relative to Xdrakres too).
- <font color="#000080"><i>Show Information</i></font>: display an information dialog showing current
-configuration internals of X.
- <font color="#000080"><i>Test again</i></font>: restart test with current configuration of X.
- <font color="#000080"><i>Quit</i></font>: exit X configuration main window. Other question about autologin
-and window manager to use are asked on Add user step.
-
- <font color="#000080"><i>Exit install</i></font>: step displayed only in customized mode but always
-executed. Only a text is displayed with a <font color="#000080"><i>Ok</i></font> button. If clicked and some step
-have not been executed/completed correctly, a question dialog ask the user if he
-really want to quit now, default answer is <font color="#000080"><i>No</i></font>. Advanced switch let user access
-to do the previously <font color="#000080"><i>Auto install floppy</i></font> step in DrakX &lt; 8.0. This is just a
-question asking the user to generate an auto install floppy automatically.
-</pre>
-</body>
-</html>
diff --git a/docs/wizard.doc b/docs/wizard.doc
deleted file mode 100644
index 0bbf8d254..000000000
--- a/docs/wizard.doc
+++ /dev/null
@@ -1,31 +0,0 @@
-How to handle wizard?
-
-to switch in wizard mode:
-set $::isWizard to true;
-if $::Wizard_no_previous is set to true, the wizard won't display the previous button. Usefull for first step
-if $::Wizard_finished is set to true, the wizard will display Finish instead of Next. Usefull for last step
-
-how to code:
-Code as if there were no wizard.
-OK button is displayed as Next
-Cancel is displayed as Previous
-a additional button Cancel is added, xhich die with the exception 'wizard_cancelled'
-
-You have to handle the previous button. For example:
-
-step 1:
-ask_from list( blablablabl) or return;
-step2:
-ask_from list( blablablabl) or goto step1;
-step3:
-ask_from list( blablablabl) or goto step2;
-
-etc... You don't have to handle the wizard Cancel button as it send an exception.
-
-Understood? If yes, you'll see that there is a pb with ask_yesorno. In this case, yes+next returns true, no+next returns false, Cancel send the exception 'wizard_canceled' and previous send the exception 'wizard previous'. So you have to handle the previous button manually.
-
-plop.
-
-dam's, pour vous servir
-
-
diff --git a/kernel/.cvsignore b/kernel/.cvsignore
deleted file mode 100644
index 827e0ba13..000000000
--- a/kernel/.cvsignore
+++ /dev/null
@@ -1,3 +0,0 @@
-modules.description
-all.modules
-all.kernels
diff --git a/kernel/Makefile b/kernel/Makefile
deleted file mode 100644
index 90fad04b6..000000000
--- a/kernel/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-all: all.modules
-
-all.modules: ../mdk-stage1/mar/mar update_kernel list_modules.pm
- `../tools/specific_arch ./update_kernel`
-
-../mdk-stage1/mar/mar:
- make -C `dirname $@`
-
-clean:
- rm -rf *~ modules.description all.modules all.modules64
-
-check:
- perl modules.pl check > /dev/null
diff --git a/kernel/check_mar.pl b/kernel/check_mar.pl
deleted file mode 100755
index 556a0e442..000000000
--- a/kernel/check_mar.pl
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-my $mar = '../mdk-stage1/mar/mar';
--x $mar or die "ERROR: Sorry, need $mar binary\n";
-
-my %sanity_check = (
- hd => [
- qw(aic7xxx sym53c8xx initio),
- if_(arch() !~ /ppc/, 'advansys'),
- ],
- network => [
- qw(3c59x eepro100 tulip via-rhine ne2k-pci 8139too),
- if_(arch() !~ /ppc/, 'e100'),
- if_(arch() !~ /ppc|ia64/, 'tlan'),
- ],
-);
-
-my $main_version = chomp_(cat_("all.kernels/.main"));
-
-foreach (keys %sanity_check) {
- my $marfile = "all.modules/$main_version/${_}_modules.mar";
- -e $mar or die "ERROR: missing $marfile\n";
-
- my @l = map { /(\S+)\.o/ } `$mar -l $marfile`;
- my @pbs = difference2($sanity_check{$_}, \@l);
-
- @pbs and die "ERROR: sanity check should prove that " . join(" ", @pbs) . "be part of $marfile\n";
-}
diff --git a/kernel/list_modules.pm b/kernel/list_modules.pm
deleted file mode 100644
index 48929f95e..000000000
--- a/kernel/list_modules.pm
+++ /dev/null
@@ -1,186 +0,0 @@
-package list_modules;
-
-use MDK::Common;
-
-our @ISA = qw(Exporter);
-our @EXPORT = qw(load_dependencies dependencies_closure category2modules module2category sub_categories);
-
-# the categories have 2 purposes
-# - choosing modules to include on stage1's (cf update_kernel and mdk-stage1/pci-resource/update-pci-ids.pl)
-# - performing a load_category or probe_category (modules.pm and many files in perl-install)
-
-our %l = (
- ################################################################################
- network =>
- {
- main => [
- if_(arch() =~ /ppc/, qw(mace bmac gmac)),
- if_(arch() =~ /^sparc/, qw(myri_sbus sunbmac sunhme sunqe)),
- if_(arch() !~ /alpha/ && arch() !~ /sparc/,
- qw(3c501 3c503 3c505 3c507 3c509 3c515), # 3c90x
- qw(82596 abyss ac3200 acenic aironet4500_card at1700 atp com20020-pci),
- qw(cs89x0 de600 de620),
- qw(defxx), # most unused
- qw(depca dgrs dmfe e100 e1000 e2100 eepro eepro100 eexpress epic100 eth16i),
- qw(ewrk3 hamachi hp hp-plus hp100 ibmtr),
- qw(lance natsemi ne ne2k-pci ni5010 ni52 ni65 olympic pcnet32 plip rcpci), #old_tulip
- qw(sb1000 sis900 sk98lin smc-ultra smc9194 starfire tlan tmspci tulip via-rhine), #sktr
- qw(wd winbond-840 yellowfin ns83820),
- ),
- qw(3c59x 8139too sundance dl2k), #rtl8139
- ],
- raw => [
- qw(8390 mii),
- qw(ppp_generic ppp_async slhc aironet4500_core),
- ],
- pcmcia => [
- qw(3c574_cs 3c589_cs airo airo_cs aironet4500_cs axnet_cs fmvj18x_cs),
- qw(ibmtr_cs netwave_cs nmclan_cs pcnet_cs ray_cs smc91c92_cs wavelan_cs wvlan_cs),
- qw(xirc2ps_cs xircom_cb xircom_tulip_cb),
- ],
- usb => [
- qw(pegasus kaweth usbnet catc CDCEther),
- ],
- isdn => [
- qw(hisax hysdn b1pci t1pci c4),
- ],
- },
-
- ################################################################################
- disk =>
- {
- scsi => [
- if_(arch() =~ /ppc/, qw(mesh mac53c94)),
- if_(arch() =~ /^sparc/, qw(qlogicpti)),
- if_(arch() !~ /alpha/ && arch() !~ /sparc/,
- qw(3w-xxxx AM53C974 BusLogic NCR53c406a a100u2w advansys aha152x aha1542 aha1740),
- qw(atp870u dc395x_trm dtc fdomain g_NCR5380 in2000 initio pci2220i psi240i),
- qw(qla1280 qla2x00 qlogicfas qlogicfc),
- qw(seagate sim710 sym53c416 t128 tmscsim u14-34f ultrastor wd7000),
- qw(eata eata_pio eata_dma),
- ),
- '53c7,8xx',
- qw(aic7xxx pci2000 qlogicisp sym53c8xx), # ncr53c8xx
- ],
- hardware_raid => [
- if_(arch() =~ /^sparc/, qw(pluto)),
- if_(arch() !~ /alpha/ && arch() !~ /sparc/,
- qw(DAC960 dpt_i2o megaraid aacraid ataraid cciss cpqarray gdth i2o_block),
- qw(ips ppa imm),
- ),
- ],
- pcmcia => [ qw(aha152x_cs fdomain_cs nsp_cs qlogic_cs ide-cs) ], #ide_cs
- raw => [ qw(scsi_mod sd_mod) ],
- usb => [ qw(usb-storage) ],
- cdrom => [ qw(ide-cd sr_mod cdrom) ],
- },
-
- ################################################################################
-
- bus =>
- {
- usb => [ qw(usbcore usb-uhci usb-ohci ehci-hcd usbkbd keybdev input) ],
- pcmcia => [
- if_(arch() !~ /^sparc/, qw(pcmcia_core tcic ds i82365 yenta_socket)), # cb_enabler
- ],
- #serial_cs
- #ftl_cs 3c575_cb apa1480_cb epic_cb serial_cb tulip_cb iflash2+_mtd iflash2_mtd
- #cb_enabler
- },
-
- fs =>
- {
- network => [ qw(af_packet nfs lockd sunrpc) ],
- cdrom => [ qw(isofs) ],
- loopback => [ qw(isofs loop) ],
- local => [
- if_(arch() =~ /^i.86/, qw(vfat fat)),
- if_(arch() =~ /^ppc/, qw(hfs)),
- qw(reiserfs),
- ],
- various => [ qw(smbfs romfs jbd xfs) ],
-
- },
-
- ################################################################################
- multimedia =>
- {
- sound => [
- if_(arch() =~ /ppc/, qw(dmasound_awacs)),
- if_(arch() !~ /^sparc/,
- qw(cmpci cs46xx cs4281 es1370 es1371 esssolo1 i810_audio maestro maestro3),
- qw(nm256_audio pas16 trident via82cxxx_audio sonicvibes emu10k1 ymfpci),
-
- qw(snd-ice1712 snd-cmipci snd-ens1371),
- qw(snd-es1938 snd-fm801 snd-intel8x0 snd-rme96),
- qw(snd-trident snd-ymfpci),
- ),
- ],
- tv => [ qw(bttv cpia_usb ibmcam mod_quickcam ov511 ultracam usbvideo) ],
- photo => [ qw(dc2xx mdc800) ],
- radio => [ qw(radio-maxiradio) ],
- scanner => [ qw(scanner microtek) ],
- joystick => [ qw(ns558) ],
- },
-
- various =>
- # just here for classification, unused categories (nor auto-detect, nor load_thiskind)
- {
- raid => [
- qw(linear raid0 raid1 raid5 lvm-mod md multipath xor),
- ],
- mouse => [
- qw(busmouse msbusmouse logibusmouse serial qpmouse atixlmouse),
- ],
- char => [
- qw(amd768_rng applicom n_r3964 nvram pc110pad ppdev amd768_pm),
- ],
- other => [
- qw(agpgart defxx i810_rng i810fb ide-floppy ide-scsi ide-tape loop lp nbd sg st parport parport_pc),
- ],
- },
-);
-
-my %dependencies;
-
-sub load_dependencies {
- my ($file) = @_;
-
- %dependencies = map {
- my ($f, $deps) = split ':';
- $f => [ split ' ', $deps ];
- } cat_($file);
-}
-
-sub dependencies_closure {
- my @l = map { dependencies_closure($_) } @{$dependencies{$_[0]} || []};
- (@l, $_[0]);
-}
-
-sub category2modules {
- map {
- my ($t1, $t2s) = m|(.*)/(.*)|;
- map {
- my $l = $l{$t1}{$_} or die "bad category $t1/$_\n" . backtrace();
- @$l;
- } split('\|', $t2s);
- } split(' ', $_[0]);
-}
-
-sub module2category {
- my ($module) = @_;
- foreach my $t1 (keys %l) {
- my $h = $l{$t1};
- foreach my $t2 (keys %$h) {
- $module eq $_ and return "$t1/$t2" foreach @{$h->{$t2}};
- }
- }
- return;
-}
-
-sub sub_categories {
- my ($t1) = @_;
- keys %{$l{$t1}};
-}
-
-1;
diff --git a/kernel/modules.pl b/kernel/modules.pl
deleted file mode 100644
index 067c47386..000000000
--- a/kernel/modules.pl
+++ /dev/null
@@ -1,137 +0,0 @@
-use strict;
-
-
-BEGIN {
- #- for testing purpose
- (my $f = __FILE__) =~ s|/[^/]*$||;
- push @INC, $f;
-}
-
-use MDK::Common;
-use list_modules;
-
-
-my @skip_big_modules_on_stage1 = (
-qw(
-olympic
-sk98lin acenic
-3c90x
-ns83820
-aironet4500_card aironet4500_core com20020-pci hamachi starfire winbond-840
-
-dc395x_trm
-BusLogic seagate fdomain g_NCR5380
-)
-);
-
-my @skip_modules_on_stage1 = (
- qw(sktr tmspci ibmtr abyss), # alt token ring
- qw(old_tulip rtl8139),
- if_(arch() =~ /alpha|ppc/, qw(sb1000)),
- "apa1480_cb",
- "imm",
- "ppa",
- "plip",
- qw(3w-xxxx pci2220i qla2x00 i2o_block),
- qw(eata_pio eata_dma),
- 'AM53C974', # deprecated by tmscsim
- qw(ac3200 at1700 atp ni5010 ni52 ni65), #- unused from Jeff
- "u14-34f", #- duplicate from ultrastor.o
-);
-
-my %images = (
- network => 'fs/network network/main|raw bus/pcmcia',
- cdrom => 'fs/cdrom disk/cdrom|scsi|raw',
- hd => 'fs/local fs/loopback disk/scsi|hardware_raid|raw',
- usb => 'fs/network|cdrom bus/usb network/usb|raw disk/cdrom|usb|raw',
- pcmcia => 'fs/network|cdrom disk/cdrom|pcmcia|raw bus/pcmcia network/pcmcia|raw',
- other => 'network/main disk/scsi|hardware_raid ONLY_BIG fs/network network/raw fs/cdrom disk/cdrom|raw',
- all => 'fs/network|cdrom|loopback|local bus/pcmcia|usb network/main|pcmcia|usb|raw disk/cdrom|scsi|hardware_raid|pcmcia|usb|raw',
-);
-
-my $verbose = "@ARGV" =~ /-v/;
-images() if "@ARGV" =~ /images/;
-check() if "@ARGV" =~ /check/;
-pci_modules4stage1($1) if "@ARGV" =~ /pci_modules4stage1:(.*)/;
-
-sub images {
- load_dependencies('modules.dep');
-
- while (my ($image, $l) = each %images) {
- my @modules;
- foreach (split(' ', $l)) {
- if (/ONLY_BIG/) {
- @modules = intersection(\@modules, \@skip_big_modules_on_stage1);
- next;
- }
- push @modules, category2modules($_);
- }
-
- @modules = difference2(\@modules, \@skip_modules_on_stage1);
- if ($image !~ /other|all/) {
- @modules = difference2(\@modules, \@skip_big_modules_on_stage1)
- }
- @modules = map { dependencies_closure($_) } @modules;
- printf qq(%s_modules="%s"\n), $image, join(" ", map { "$_.o" } sort @modules);
- }
-}
-
-sub pci_modules4stage1 {
- print "$_\n" foreach difference2([ category2modules($_[0]) ], \@skip_modules_on_stage1);
-}
-
-sub check {
- my $error;
- my %listed;
- my %big_modules_categories;
- while (my ($t1, $l) = each %list_modules::l) {
- while (my ($t2, $l) = each %$l) {
- ref $l or die "bad $l in $t1/$t2";
- print "MODULE: $_\n" foreach @$l;
- foreach (@$l) {
- $listed{$_} = 1;
- push @{$big_modules_categories{$t1}{$t2}}, $_ if member($_, @skip_modules_on_stage1);
- }
- }
- }
-
- # remove accepted categories for other.img
- delete $big_modules_categories{disk}{hardware_raid};
- delete $big_modules_categories{disk}{scsi};
- delete $big_modules_categories{network}{main};
-
- if (map { %$_ } values %big_modules_categories) {
- my @l = map { "$_/" . join('|', sort keys %{$big_modules_categories{$_}}) } sort keys %big_modules_categories;
- print STDERR "WEIRD CATEGORIES USED FOR other.img: ", join(" ", @l), "\n";
- if ($verbose) {
- while (my ($t1, $t2s) = each %big_modules_categories) {
- print "$t1/$_ used for other.img: ", join(" ", @{$t2s->{$_}}), "\n" foreach keys %$t2s;
- }
- }
- $error = 1;
- }
-
- my %deprecated_modules = %listed;
- my $not_listed = sub {
- my ($msg, $verbose, @l) = @_;
- my %not_listed;
- foreach (@l) {
- my ($mod) = m|([^/]*)\.o(\.gz)?$| or next;
- delete $deprecated_modules{$mod};
- next if $listed{$mod};
- s|.*?mdk(BOOT)?/||;
- s|kernel/||; s|drivers/||; s|3rdparty/||;
- $_ = dirname $_;
- $_ = dirname $_ if $mod eq basename($_);
- push @{$not_listed{$_}}, $mod;
- }
- if ($verbose) {
- print "$msg $_: ", join(" ", @{$not_listed{$_}}), "\n" foreach sort keys %not_listed;
- }
- };
- $not_listed->('NOT LISTED', 1, `cd all.kernels/2.4* ; find -name "*.o" -o -name "*.o.gz"`);
- $not_listed->('not listed', $verbose, `rpm -qpl /RPMS/kernel-2.4*`);
- print "bad/old modules : ", join(" ", sort keys %deprecated_modules), "\n" if %deprecated_modules;
-
- exit $error;
-}
diff --git a/kernel/update_kernel b/kernel/update_kernel
deleted file mode 100755
index 9cea09e7d..000000000
--- a/kernel/update_kernel
+++ /dev/null
@@ -1,100 +0,0 @@
-#!/bin/bash
-
-ALL_KERNELS="all.kernels"
-
-# move stuff to this new "kernel" directory
-if [ ! -d all.kernels ]; then
- mv ../all.kernels .
- rm -rf ../all.modules
-fi
-
-function create_marfile() {
- marfile=$1
- shift
- $GIBASEDIR/mdk-stage1/mar/mar -c $marfile $*
-}
-
-function create_modules() {
- kernel_path=$1
- kern=$2
- echo "Updating modules in '`pwd`' for kernel '$kern'"
- cp -f `find $kernel_path/lib/modules/ -name "*.o"` .
- /sbin/depmod -F $kernel_path/boot/System.map* -e *.o | perl -pe 's/\\\n//' \
- | perl -ne 's/\.o//g; s/[ \t]+/ /g; print if /: /' > modules.dep
- perl -pi -e 's/((plip|ppa|imm): parport)/$1 parport_pc/' modules.dep
-
- /sbin/modinfo -f '%{filename} %{description}\n' *.o | perl -lne 'print "$1\t$2" if /(.*?)\.o "(.*)"/' > modules.description
-
- echo -n "packdrake $kern: "
- ls *.o | packdrake -b9s "modules.cz" 400000
- echo "done"
- mv modules.cz ../modules.cz-$kern
- for i in network cdrom hd usb other pcmcia all; do
- modules_var="${i}_modules"
- eval "create_marfile ${i}_modules.mar \$$modules_var"
- done
- echo
-}
-
-[ -e $ALL_KERNELS/.main ] && main=$(cat $ALL_KERNELS/.main)
-
-rpm=$(rpm -qp --qf '%{name}' /RPMS/kernel-BOOT-*.rpm | perl -pe 's/kernel-BOOT-(.*)\.(.*)/$1-${2}BOOT/')
-if [ -n "$rpm" -a ! -e $ALL_KERNELS/$rpm ]; then
- [ -n "$main" ] && rm -rf $ALL_KERNELS/$main
- cd $ALL_KERNELS
- rm -rf $rpm ; mkdir $rpm
- cd $rpm
- rpm2cpio /RPMS/kernel-BOOT-*.rpm | cpio -id
- find -type f -name "*.o.gz" | xargs gunzip
- cd ../..
-
- for dir in /tftpboot /var/lib/tftpboot; do
- rm -f $dir/{vmlinuz,network.rdz}
- done
-fi
-
-[ -n "$main" -a -e $ALL_KERNELS/$main ] || {
- cd $ALL_KERNELS
- main=$(echo 2.* | sed 's/.* //')
- echo "Choosing $main"
- echo $main > .main
- cd ..
-}
-
-ARCH=`uname -m | sed -e 's/i.86/i386/' -e 's/sparc.*/sparc/'`
-
-eval `perl modules.pl images`
-
-if [ "$ARCH" == "i386" ]; then
- for i in $ALL_KERNELS/*/boot/vmlinuz*; do
- #disable any existing resolution!!!
- /usr/sbin/rdev -v $i 65535 #788 #785
- done
-else
- if [ "$ARCH" == "ppc" ]; then
- cp -f "$KERNEL_BOOT_PATH"/boot/vmlinux .
- else
- cp -f "$KERNEL_BOOT_PATH"/boot/vmlinux.gz .
- fi
-fi
-
-
-GIBASEDIR=`pwd`/..
-
-rm -rf all.modules ; mkdir all.modules
-for i in $ALL_KERNELS/*; do
- kern=`basename $i`
- (
- mkdir all.modules/$kern
- cd all.modules/$kern
- if [ "$kern" = "$main" ]; then
- create_modules ../../$i $kern
- else
- echo "$kern ($main)"
- create_modules ../../$i $kern 2>/dev/null
- fi
- ) || exit 1
-done
-cp -f all.modules/$main/modules.description .
-
-./check_mar.pl
diff --git a/live_update b/live_update
deleted file mode 100644
index 0778b4ae8..000000000
--- a/live_update
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-
-message=/usr/X11R6/bin/gmessage
-[ -x $message ] || message=/usr/X11R6/bin/xmessage
-[ -x $message ] || unset message
-
-if [ "$UID" -ne 0 ]; then
- if [ -x "$message" ]; then
- case "$LANG" in
- fr*) buttons="Arręter:0"
- msg="Mise ŕ jour en direct de Mandrake Linux.
-
-Vous devez ętre l'utilisateur root pour lancer cette application." ;;
- *) buttons="Abort:0"
- msg="Mandrake Linux live upgrade.
-
-You need to be root to start this program." ;;
- esac
- $message -buttons "$buttons" -print "$msg"
- else
- echo >&2 "You need to be root to start this program."
- fi
- exit 3
-fi
-
-distrib=`pwd`;
-if [ ! -x "$distrib/Mandrake/mdkinst/usr/bin/perl-install/live_install" ]; then
- distrib="/mnt/cdrom"
-fi
-if [ ! -x "$distrib/Mandrake/mdkinst/usr/bin/perl-install/live_install" ]; then
- if [ -x "$message" ]; then
- case "$LANG" in
- fr*) buttons="Arręter:0"
- msg="Mise ŕ jour en direct de Mandrake Linux.
-
-Impossible de trouver le Cédérom d'installation de Mandrake Linux dans le premier lecteur." ;;
- *) buttons="Abort:0"
- msg="Mandrake Linux live upgrade.
-
-Unable to find Mandrake Linux Installation Cd-Rom in the first drive." ;;
- esac
- $message -buttons "$buttons" -print "$msg"
- else
- echo >&2 "Unable to find Mandrake Linux Installation Cd-Rom in the first drive."
- fi
- exit 2
-fi
-
-if [ -x "$message" ]; then
- case "$LANG" in
- fr*) buttons="Mise ŕ jour:0,Annuler:1"
- msg="Mise ŕ jour en direct de Mandrake Linux.
-
-Appuyez sur \"Mise ŕ jour\" pour lancer la mise ŕ jour de votre systčme,
-cela prendra quelques minutes avant que l'écran de DrakX apparaisse.
-
-Appuyez sur \"Annuler\" pour ne pas mettre ŕ jour votre systčme de cette maničre." ;;
- *) buttons="Upgrade:0,Cancel:1"
- msg="Mandrake Linux live upgrade.
-
-Press \"Upgrade\" to start live upgrade on your system, note this will
-take some time to prepare the system before DrakX screen appears.
-
-Press \"Cancel\" to avoid upgrading your system this way." ;;
- esac
- default=`echo $buttons | cut -d: -f1`
- $message -buttons "$buttons" -default "$default" -print "$msg"
- [ $? -ne 0 ] && exit 1
-else
- echo >&2 "Press ENTER to start live upgrade on your system, note this will
-take some time to prepare the system before DrakX screen appears.
-
-Press CTRL-C to avoid upgrading your system this way."
-fi
-
-cd "$distrib/Mandrake/mdkinst/usr/bin/perl-install" && exec ./live_install
-exit 2
diff --git a/make_boot_img b/make_boot_img
deleted file mode 100755
index 9a0b71c8a..000000000
--- a/make_boot_img
+++ /dev/null
@@ -1,512 +0,0 @@
-#!/usr/bin/perl
-
-@ARGV >= 2 or die "usage: $0 <image> all|other|cdrom|hd|network|usb|blank|pcmcia|live|tftp|tftprd\n";
-
-use Config;
-use MDK::Common;
-Config->import;
-my ($arch) = $Config{archname} =~ /(.*)-/;
-
-($img, $type) = @ARGV;
-
-# move stuff to new "kernel" directory
--d 'kernel' or die "directory kernel is missing\n";
-rename 'all.kernels', 'kernel/all.kernels';
-rename 'all.modules', 'kernel/all.modules';
-
-$default_append = "ramdisk_size=32000 root=/dev/ram3";
-$default_vga = "vga=788";
-
-$instdir = "mdk-stage1";
-$mnt = "/tmp/drakx_mnt";
-$mke2fs = "/sbin/mke2fs -q -m 0 -F -s 1";
-
-if ($>) {
- $sudo = "sudo";
- $ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-}
-
-sub __ { print @_, "\n"; system(@_); }
-sub _ { __ @_; $? and die; }
-
-_ "$sudo mkdir $mnt" unless -e $mnt;
-_ "$sudo mkdir ${mnt}2" unless -e "${mnt}2";
-
-$install = $ {{
- all => "stage1-full",
- other => "stage1-full",
- blank => "stage1-full",
- live => "stage1-full",
- tftp => "stage1-full",
- tftprd => "stage1-full",
- pcmcia => "stage1-full",
- network => "stage1-network",
- usb => "stage1-usb",
- cdrom => "stage1-cdrom",
- hd => "stage1-disk",
- live64 => "stage1-full",
- tftp64 => "stage1-full",
- tftprd64 => "stage1-full",
- pcmcia64 => "stage1-full",
- network64 => "stage1-network",
- cdrom64 => "stage1-cdrom",
- hd64 => "stage1-disk",
-}}{$type} or die;
-
-mkdir "images";
-chomp($main = `cat kernel/all.kernels/.main`);
-
-if ($img =~ /blank|other|pcmcia/) {
- @kernels = $main;
-} else {
- @kernels = map { m|kernel/all.kernels/(.*)| } glob('kernel/all.kernels/*');
- $img =~ /usb/ and @kernels = grep { $_ !~ /2\.2\.14/ } @kernels; #- 2.2.14 is too old, usb support was not working properly
-}
-
-foreach (@kernels) {
- if ($img =~ /rdz$/) {
- initrd($mnt, "$img-$_");
- } else {
- $::{"boot_img_$arch"}->($mnt, "$img-$_", glob("kernel/all.kernels/$_/boot/vmlinu*"));
- rename("$img-$main", "$img");
- }
-}
-if ($arch =~ /i.86/ && $img =~ /all/) {
- isolinux($main, @kernels);
-}
-
-if (my ($tftpboot) = grep { -e $_ } qw(/tftpboot /var/lib/tftpboot)) {
- system("/bin/cp -f kernel/all.kernels/$main/boot/vmlinu* $tftpboot/vmlinuz 2>/dev/null");
- system("/bin/cp -f images/network.rdz-$main $tftpboot/network.rdz 2>/dev/null");
-}
-
-sub install_stripped { _ "strip $_[0]"; _ "$sudo install $_[0] $_[1]" }
-
-sub initrd {
- my ($mnt, $img) = @_;
- my ($ltype, $I) = $type =~ /(.*?)(64)/; $ltype ||= $type;
- my $tmp = "$ENV{HOME}/tmp/initrd";
- my $tar = "$instdir/stage1-data/stage1.tar.bz2";
-
- __ "$sudo umount $tmp $mnt 2>/dev/null";
- _ "dd if=/dev/zero of=$tmp bs=1k count=" . ($arch =~ /ia64/ ? ($type eq "all" ? 16386 : 16384) : ($type eq "all" ? 4000 : 2000));
- _ "$mke2fs $tmp";
- _ "$sudo mount -t ext2 $tmp $mnt -o loop";
-
- _ "$sudo tar xjC $mnt -f $tar";
- install_stripped("$instdir/init", "$mnt/sbin");
- install_stripped("$instdir/$install", "$mnt/sbin/stage1");
-
- if ($type eq "network" || $type eq "usb" || $type eq "all" || $type eq "other" || $type eq "blank") {
- install_stripped("$instdir/ppp/pppd-bin", "$mnt/sbin/pppd");
- install_stripped("$instdir/rp-pppoe/pppoe-bin", "$mnt/sbin/pppoe");
- _ "$sudo mknod $mnt/dev/ppp c 108 0";
- _ "$sudo mknod $mnt/dev/ptyp0 c 2 0";
- _ "$sudo mknod $mnt/dev/ttyp0 c 3 0";
- }
-
- if (member($type, qw(pcmcia all network)) && $arch !~ /ppc/ && $arch !~ /ia64/) {
- _ "$sudo cp -a /etc/pcmcia $mnt/etc";
- _ "cp $mnt/etc/pcmcia/config /tmp/pcmcia_config_tmp";
- _ "tools/patch_pcmcia_config.pl /tmp/pcmcia_config_tmp kernel/all.modules/$main/modules.dep";
- _ "sudo mv /tmp/pcmcia_config_tmp $mnt/etc/pcmcia/config";
- }
- my ($ext) = $img =~ /rdz-(.*)/ or die "bad initrd name ($img)";
- $modz = "kernel/all.modules$I/$ext";
- _ "$sudo cp -f $modz/${ltype}_modules.mar $mnt/modules/modules$I.mar" if $type !~ /blank/;
- _ "$sudo cp -f $modz/modules.dep $mnt/modules/";
- _ "$sudo umount $mnt";
-
-
-# Workaround for vfat-loop bug (quite touchy)
- _ "gzip -9f $tmp";
- _ "cp -f $tmp.gz $img";
- _ "rm -f $tmp.gz";
-# _ "gzip -9 -c $tmp > $img";
-# _ "rm -f $tmp";
-}
-
-sub entries_append {
- my ($type) = @_;
-
- my $automatic = "";
- $automatic = "automatic=method:cdrom" if ($type eq "cdrom");
- $automatic = "automatic=method:disk" if ($type eq "hd");
-
- my @simple_entries = (
- linux => "$default_vga",
- vgalo => "vga=785",
- vgahi => "vga=791",
- vga16 => "vga16",
- text => "text",
- patch => "patch $default_vga",
- expert => "expert $default_vga",
- rescue => "rescue rw",
- );
- my @entries = (
- (map { $_->[0] => "$automatic $_->[1]" } group_by2(@simple_entries)),
- if_(member($type, "cdrom", "all"), oem => "automatic=method:cdrom $default_vga rescue oem rw"),
- if_($type eq "all", all => "pcmcia $default_vga"),
- );
-
- map { [ $_->[0], "$default_append $_->[1]" ] }
- group_by2(@entries);
-}
-
-sub boot_img_i386 {
- my ($mnt, $img, $kernel) = @_;
-
- __ "$sudo umount $mnt 2>/dev/null";
-
- if ($type eq "hd") {
- _ "bunzip2 -c $instdir/init-data/msgboot.img.bz2 > $img";
- } elsif ($type eq "all") {
- _ "bunzip2 -c $instdir/init-data/msgboot-graphicallogo-2880.img.bz2 > $img";
- } elsif ($type eq "blank") {
- _ "bunzip2 -c $instdir/init-data/msgboot-blank.img.bz2 > $img";
- } else {
- _ "bunzip2 -c $instdir/init-data/msgboot-graphicallogo.img.bz2 > $img";
- }
-
-
- _ "$sudo mount -t vfat -o umask=0 $img $mnt -o loop";
- _ "cat $kernel > $mnt/vmlinuz" if $type !~ /blank/;
-
- my $rdz = $img; $rdz =~ s/\.img/.rdz/;
- initrd("${mnt}2", $rdz) if !-e $rdz;
- eval { _ "cp -f $rdz $mnt/$type.rdz" };
- if ($@) {
- unlink "$mnt/$type.rdz";
- my $avail = (split ' ', `df $mnt`)[-3];
- my $s = int((-s $rdz) / 1024);
- die sprintf("not enough room for $rdz: need %dKB (available %dKB < needed %dKB)\n", $s - $avail, $avail, $s);
- }
-
- my $timeout = 72;
- output "$mnt/syslinux.cfg",
-"default linux
-prompt 1
-timeout $timeout
-display boot.msg
-F1 help.msg
-F2 advanced.msg
-F3 boot.msg
-" . join('', map {
-"label $_->[0]
- kernel vmlinuz
- append initrd=$type.rdz $_->[1]
-" } entries_append($type));
-
- _ "sync";
- _ "df $mnt";
-}
-
-sub boot_img_alpha {
- my ($mnt, $img) = @_;
-
- __ "$sudo umount $mnt 2>/dev/null";
- _ "dd if=/dev/zero of=$img bs=1k count=1440";
- _ "$mke2fs $img";
- _ "/sbin/e2writeboot $img /boot/bootlx";
- _ "$sudo mount -t ext2 $img $mnt -o loop";
- _ "cp -f vmlinux.gz $mnt" if $type !~ /blank/;
- -f "$type.rdz" ? _ "cp -f $type.rdz $mnt" : initrd("${mnt}2", "$mnt/$type.rdz");
-
- mkdir "$mnt/etc", 0777;
- output("$mnt/etc/aboot.conf",
-"0:vmlinux.gz initrd=$type.rdz rw $default_append $type
-1:vmlinux.gz initrd=$type.rdz rw $default_append text $type
-");
- _ "sync";
- _ "df $mnt";
-}
-
-sub boot_img_ia64 {
- my ($mnt, $img, $kernel) = @_;
- my $rdz = $img; $rdz =~ s/\.img/.rdz/;
-
- __ "$sudo umount $mnt 2>/dev/null";
- _ "dd if=/dev/zero of=$img bs=1k count=16384";
- _ "mkdosfs $img";
- _ "$sudo mount -t vfat $img $mnt -o loop,umask=000";
- _ "$sudo cp -f $kernel $mnt/vmlinux";
- _ "cp -f $rdz $mnt/$type.rdz";
- _ "$sudo cp -f tools/ia64/elilo.efi $mnt";
- output("$mnt/elilo.conf", "
-prompt
-timeout=50
-
-image=vmlinux
- label=linux
- root=/dev/ram3
- initrd=$type.rdz
- append=\" ramdisk_size=120000\"
- read-only
-
-image=vmlinux
- label=rescue
- root=/dev/ram3
- initrd=$type.rdz
- append=\" rescue ramdisk_size=120000\"
-");
- _ "sync";
- _ "df $mnt";
-
-}
-
-sub boot_img_sparc {
- my ($mnt, $img) = @_;
- if ($type =~ /^live(.*)/) {
- #- hack to produce directly into /export the needed file for cdrom boot.
- my $dir = "/export";
- my $boot = "boot"; #- non-absolute pathname only!
-
- _ "mkdir -p $dir/$boot";
- _ "cp -f /boot/cd.b /boot/second.b $dir/$boot";
- _ "cp -f vmlinux$1 $dir/$boot/vmlinux$1";
- -f "live$1.rdz" ? _ "cp -f live$1.rdz $dir/$boot" : initrd("${mnt}2", "$dir/$boot/live$1.rdz");
-
- output("$dir/$boot/silo.conf", "
-partition=1
-default=linux
-timeout=100
-read-write
-message=/$boot/boot.msg
-image=\"cat /$boot/boot.msg\"
- label=1
- single-key
-image=\"cat /$boot/general.msg\"
- label=2
- single-key
-image=\"cat /$boot/expert.msg\"
- label=3
- single-key
-image=\"cat /$boot/rescue.msg\"
- label=4
- single-key
-image=\"cat /$boot/kickit.msg\"
- label=5
- single-key
-image=\"cat /$boot/param.msg\"
- label=6
- single-key
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
- label=linux
- alias=install
- initrd=/$boot/live.rdz
- append=\"ramdisk_size=32000 root=/dev/ram3\"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
- label=text
- initrd=/$boot/live.rdz
- append=\"ramdisk_size=32000 text root=/dev/ram3\"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
- label=expert
- initrd=/$boot/live.rdz
- append=\"ramdisk_size=32000 expert root=/dev/ram3\"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
- label=ks
- initrd=/$boot/live.rdz
- append=\"ramdisk_size=32000 ks root=/dev/ram3\"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
- label=rescue
- initrd=/$boot/live.rdz
- append=\"ramdisk_size=32000 rescue rw root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
- label=linux
- alias=install
- initrd=/$boot/live64.rdz
- append=\"ramdisk_size=32000 root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
- label=text
- initrd=/$boot/live64.rdz
- append=\"ramdisk_size=32000 text root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
- label=expert
- initrd=/$boot/live64.rdz
- append=\"ramdisk_size=32000 expert root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
- label=ks
- initrd=/$boot/live64.rdz
- append=\"ramdisk_size=32000 ks root=/dev/ram3\"
-image[sun4u]=/$boot/vmlinux64
- label=rescue
- initrd=/$boot/live64.rdz
- append=\"ramdisk_size=32000 rescue rw root=/dev/ram3\"
-");
-
- output("$dir/$boot/README", "
-To Build a Bootable CD-ROM, try:
- mkisofs -R -o t.iso -s /$boot/silo.conf /export
-");
- } elsif ($type =~ /^tftprd(.*)/) {
- my $dir = "/export";
- my $boot = "images";
- my $setarch = $1 ? "sparc64" : "sparc32";
-
- _ "mkdir -p $dir/$boot";
- -f "$type.rdz" or initrd("${mnt}2", "$type.rdz");
- _ "cp -f vmlinux$1.aout $dir/$boot/$type.img";
- _ "$setarch kernel$1/src/arch/sparc$1/boot/piggyback $dir/$boot/$type.img kernel$1/boot/System.map $type.rdz";
- } elsif ($type =~ /^tftp(.*)/) {
- my $dir = "/export";
- my $boot = "images";
-
- _ "mkdir -p $dir/$boot";
- _ "cp -f vmlinux$1.aout $dir/$boot/$type.img";
- } else {
- my $dir = "floppy";
- my ($ltype, $I) = $type =~ /(.*?)(64)/; $ltype ||= $type;
-
- __ "$sudo umount $mnt 2>/dev/null";
- _ "rm -rf $dir";
- _ "mkdir -p $dir";
- _ "cp -f /boot/fd.b /boot/second.b $dir";
- _ "cp -f vmlinuz$I $dir/vmlinux$I.gz" if $type !~ /blank/;
- -f "$type.rdz" ? _ "cp -f $type.rdz $dir" : initrd("${mnt}2", "$dir/$type.rdz");
-
- output("$dir/boot.msg", "
-Welcome to Mandrake Linux 7.1
-
-Press <Enter> to install or upgrade a system 7mMandrake Linux7m
-");
-
- output("$dir/silo.conf", "
-partition=1
-default=linux
-timeout=100
-read-write
-message=/boot.msg
-image=/vmlinux$I.gz
- label=linux
- initrd=/$type.rdz
- append=\"ramdisk_size=32000 $ltype root=/dev/ram3\"
-");
- _ "genromfs -d $dir -f /dev/ram -A 2048,/.. -a 512 -V \'DrakX boot disk\'";
- _ "$sudo mount -t romfs /dev/ram $mnt";
- _ "silo -r $mnt -F -i /fd.b -b /second.b -C /silo.conf";
- _ "$sudo umount $mnt";
- _ "dd if=/dev/ram of=$type.img bs=1440k count=1";
- _ "sync";
- _ "$sudo mount -t romfs /dev/ram $mnt";
- _ "df $mnt";
- }
-}
-
-sub boot_img_ppc {
- my ($mnt, $img, $kern, $modz) = @_;
- my $dir = "/export";
- my $boot = "boot"; #- non-absolute pathname only!
- my ($extension) = $modz =~ /.*\/([^\/]+)/;
- _ "mkdir -p $dir/$boot";
- _ "cp -f $kern $dir/$boot/vmlinux";
- _ "cp -f images/all.rdz$extension $dir/boot/all.gz";
- _ "cp -f tools/ppc/yaboot $dir/boot/yaboot";
-
- output("$dir/$boot/yaboot.conf", "
-init-message = \"\\nWelcome to Mandrake Linux PPC!\\nHit <TAB> for boot options.\\n\\n\"
-timeout = 150
-default = install-novideo
-
-image = cd:,\\\\\\\\vmlinux
- label = install-novideo
- root = /dev/ram3
- initrd = cd:,\\\\\\\\all.gz
- initrd-size = 32000
- append = \" video=ofonly\"
-
-image = cd:,\\\\\\\\vmlinux
- label = install-atyfb
- root = /dev/ram3
- initrd = cd:,\\\\\\\\all.gz
- initrd-size = 32000
- append = \" video=atyfb:vmode:17\"
-
-image = cd:,\\\\\\\\vmlinux
- label = install-aty128fb
- root = /dev/ram3
- initrd = cd:,\\\\\\\\all.gz
- initrd-size = 32000
- append = \" video=aty128fb:vmode:17\"
-
-image = cd:,\\\\\\\\vmlinux
- label = install-text
- root = /dev/ram3
- initrd = cd:,\\\\\\\\all.gz
- initrd-size = 32000
- append = \" text video=ofonly\"
-
-image = enet:0,vmlinux
- label = install-net
- root = /dev/ram3
- initrd = enet:0,all.gz
- initrd-size = 32000
- append = \" video=ofonly\"
-
-image = enet:0,vmlinux
- label = install-net-text
- root = /dev/ram3
- initrd = enet:0,all.gz
- initrd-size = 32000
- append = \" text video=ofonly\"
-
-image = cd:,\\\\\\\\vmlinux
- label = rescue
- root = /dev/ram3
- initrd = cd:,\\\\\\\\all.gz
- initrd-size = 32000
- append = \" rescue video=ofonly\"
-
-image = enet:0,vmlinux
- label = rescue-net
- root = /dev/ram3
- initrd = enet:0,all.gz
- initrd-size = 32000
- append = \" rescue video=ofonly\"
-");
- #- seem to need 2 yaboot.conf, one in the root, and one in boot
- _ "cp -f $dir/boot/yaboot.conf $dir/yaboot.conf";
-
- output("$dir/$boot/README", "
-To Build a Bootable CD-ROM, do:
-cd /tools/ppc
-./mkINSTALLCD /export ppc-cd.img
-");
-
-}
-
-sub isolinux {
- my ($main, @kernels) = @_;
- @kernels = ($main, grep { $_ ne $main } @kernels);
- my $debug = 1 ? '-debug' : '';
- _ "rm -rf isolinux"; mkdir "isolinux", 0777;
- my $i = 0;
- foreach (@kernels) {
- mkdir "isolinux/alt$i", 0777;
- my ($kernel) = glob("kernel/all.kernels/$_/boot/vmlinu*");
- _ "cp $kernel isolinux/alt$i/vmlinuz";
- _ "cp images/all.rdz-$_ isolinux/alt$i/all.rdz";
- $i++;
- }
- _ "cp /usr/lib/syslinux/isolinux$debug.bin isolinux/isolinux.bin";
- output "isolinux/isolinux.cfg", "
-default linux
-prompt 1
-timeout 150
-display help.msg
-" . join('', map {
-"label $_->[0]
- kernel alt0/vmlinuz
- append changedisk initrd=alt0/all.rdz $_->[1]
-" } entries_append('all'))
- . join('', map_index {
-"label alt$::i
- kernel alt$::i/vmlinuz
- append changedisk initrd=alt$::i/all.rdz $default_append $default_vga
-" } @kernels);
-
- output "isolinux/help.msg",
-"This is a special bootable CDROM giving you a choice between various kernels.
-
-The default is kernel $main.
-" . join('', map_index { $::i ? "\"alt$::i\" is kernel $_\n" : '' } @kernels);
-}
diff --git a/mdk-stage1/.cvsignore b/mdk-stage1/.cvsignore
deleted file mode 100644
index a96a43de4..000000000
--- a/mdk-stage1/.cvsignore
+++ /dev/null
@@ -1,12 +0,0 @@
-init
-stage1-full
-stage1-cdrom
-stage1-disk
-stage1-network
-debug.log
-.depend
-*.rdz*
-mkinitrd_helper.tar.bz2
-hack_*
-stage1-usb
-rescue-gui
diff --git a/mdk-stage1/Makefile b/mdk-stage1/Makefile
deleted file mode 100644
index 98fb79375..000000000
--- a/mdk-stage1/Makefile
+++ /dev/null
@@ -1,260 +0,0 @@
- #******************************************************************************
- #
- # mdk-stage1 - the program that will load second-stage install
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- # Portions from Erik Troan (ewt@redhat.com) Copyright 1996 Red Hat Software
- #
- #*****************************************************************************
- #
- # Currently:
- #
- # ix86
- # init with minilibc
- # stage1 with dietlibc
- #
- # ppc
- # init with dietlibc
- # stage1 with glibc
- #
- # ia64
- # init with glibc
- # stage1 with glibc
- #
- #*****************************************************************************
-
-
-VERSION = 8.2
-
-top_dir = .
-
-include $(top_dir)/Makefile.common
-
-
-DEFS = -DVERSION=\"$(VERSION)\" -DSPAWN_SHELL
-
-COMPILE = $(CC) $(DEFS) $(CFLAGS)
-
-
- #- stage1 "loader"
-ifeq (i386, $(ARCH))
-INITSRC = minilibc.c init.c
-INIT_DEFS = -DINIT_HEADERS=\"minilibc.h\" -fno-builtin
-else
-INITSRC = init.c
-ifeq (ia64, $(ARCH))
-INIT_DEFS = -DINIT_HEADERS=\"init-libc-headers.h\" $(GLIBC_INCLUDES)
-else
-INIT_DEFS = -DINIT_HEADERS=\"init-libc-headers.h\" $(DIETLIBC_INCLUDES)
-endif
-endif
-
-INITOBJS = $(subst .c,.o,$(INITSRC))
-
-
- #- frontends
-NEWT_FRONTEND_SRC = newt-frontend.c
-GLIBC_NEWT_FRONTEND_LIBS = newt/libnewt.a slang/libslang.a
-DIETLIBC_NEWT_FRONTEND_LIBS = $(subst .a,-DIET.a,$(GLIBC_NEWT_FRONTEND_LIBS))
-
-STDIO_FRONTEND_SRC = stdio-frontend.c
-GLIBC_STDIO_FRONTEND_LIBS =
-DIETLIBC_STDIO_FRONTEND_LIBS =
-
-
-FRONTEND_OBJS = $(subst .c,.o,$($(F)_FRONTEND_SRC))
-
-FRONTEND_LINK = $(FRONTEND_OBJS) $($(L)_$(F)_FRONTEND_LIBS)
-
-ifeq (i386, $(ARCH))
-INSMOD = insmod-busybox
-else
-INSMOD = insmod-modutils
-endif
-
-GLIBC_STAGE1_OWN_LIBS = $(INSMOD)/libinsmod.a mar/libmar.a bzlib/libbzlib.a
-DIETLIBC_STAGE1_OWN_LIBS = $(subst .a,-DIET.a,$(GLIBC_STAGE1_OWN_LIBS))
-STAGE1_OWN_LIBS = $($(L)_STAGE1_OWN_LIBS)
-
-
-ifeq (DIETLIBC, $(L))
-STAGE1_NETWORK_LIBS = $(top_dir)/dietlibc/bin-$(ARCH)/librpc.a
-endif
-
-ifeq (GLIBC, $(L))
-STAGE1_NETWORK_LIBS = /usr/lib/libresolv.a
-endif
-
- #- stage1 itself
-STAGE1SRC = stage1.c log.c tools.c modules.c probing.c mount.c automatic.c frontend-common.c
-CDROMSRC = cdrom.c
-DISKSRC = disk.c lomount.c
-NETWORKSRC = network.c nfsmount.c dhcp.c url.c dns.c adsl.c
-
-ALLSRC = $(INITSRC) $(STAGE1SRC) $(CDROMSRC) $(DISKSRC) $(NETWORKSRC)
-
-
-
-STAGE1OBJS-CDROM = $(subst .c,-CDROM.o,$(STAGE1SRC) $(CDROMSRC))
-
-CDROM_DEFS = -DDISABLE_DISK -DDISABLE_NETWORK
-
-
-STAGE1OBJS-DISK = $(subst .c,-DISK.o,$(STAGE1SRC) $(DISKSRC))
-
-DISK_DEFS = -DDISABLE_CDROM -DDISABLE_NETWORK
-
-
-STAGE1OBJS-NETWORK = $(subst .c,-NETWORK.o,$(STAGE1SRC) $(NETWORKSRC))
-
-NETWORK_DEFS = -DDISABLE_CDROM -DDISABLE_DISK
-
-
-STAGE1OBJS-USB = $(subst .c,-USB.o,$(STAGE1SRC) $(CDROMSRC) $(DISKSRC) $(NETWORKSRC))
-
-STAGE1OBJS-FULL = $(subst .c,-FULL.o,$(STAGE1SRC) $(CDROMSRC) $(DISKSRC) $(NETWORKSRC))
-
-
-ifeq (i386, $(ARCH))
-LDFLAGS_INIT = -static -nostdlib /usr/lib/crt1.o
-else
-ifeq (ia64, $(ARCH))
-LDFLAGS_INIT = $(GLIBC_LDFLAGS_STAGE1)
-INIT_LIBC = $(GLIBC_LIBC)
-else
-LDFLAGS_INIT = $(DIETLIBC_LDFLAGS_STAGE1)
-INIT_LIBC = $(DIETLIBC_LIBC)
-endif
-endif
-
-
-BINS = init stage1-full
-
-ifeq (i386, $(ARCH))
-BINS += stage1-cdrom stage1-disk stage1-network stage1-usb
-endif
-
-ifneq (ia64, $(ARCH))
-DIRS = dietlibc
-endif
-DIRS += mar pci-resource usb-resource bzlib $(INSMOD) slang newt ppp/pppd rp-pppoe/src
-ifeq (i386,$(ARCH))
-DIRS += pcmcia_
-endif
-
-
-ifeq (i386,$(ARCH))
-GLIBC_PCMCIA_LIB = pcmcia_/libpcmcia.a
-DIETLIBC_PCMCIA_LIB = $(subst .a,-DIET.a,$(GLIBC_PCMCIA_LIB))
-PCMCIA_LIB = $($(L)_PCMCIA_LIB)
-PCMCIA_DEFS = -DENABLE_PCMCIA
-endif
-
-
-USB_DEFS_GEN = -DENABLE_USB
-USB_DEFS = -DENABLE_USB -DDISABLE_PCIADAPTERS
-
-all: dirs $(BINS)
-
-dirs:
- @for n in . $(DIRS); do \
- [ "$$n" = "." ] || make -C $$n || exit 1 ;\
- done
-
-init: $(INITOBJS) $(INIT_LIBC)
- $(CC) $(LDFLAGS_INIT) -o $@ $^
- $(STRIPCMD) $@
-
-stage1-cdrom: $(STAGE1OBJS-CDROM) $(STAGE1_OWN_LIBS) $(FRONTEND_LINK) $(STAGE1_LIBC)
- $(CC) $(LDFLAGS_STAGE1) -o $@ $^
- $(STRIPCMD) $@
-
-stage1-disk: $(STAGE1OBJS-DISK) $(STAGE1_OWN_LIBS) $(FRONTEND_LINK) $(STAGE1_LIBC)
- $(CC) $(LDFLAGS_STAGE1) -o $@ $^
- $(STRIPCMD) $@
-
-stage1-network: $(STAGE1OBJS-NETWORK) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(PCMCIA_LIB) $(STAGE1_LIBC)
- $(CC) $(LDFLAGS_STAGE1) -o $@ $^
- $(STRIPCMD) $@
-
-stage1-usb: $(STAGE1OBJS-USB) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(STAGE1_LIBC)
- $(CC) $(LDFLAGS_STAGE1) -o $@ $^
- $(STRIPCMD) $@
-
-stage1-full: $(STAGE1OBJS-FULL) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(PCMCIA_LIB) $(STAGE1_LIBC)
- $(CC) $(LDFLAGS_STAGE1) -o $@ $^
- $(STRIPCMD) $@
-
-
-$(INITOBJS): %.o: %.c
- $(COMPILE) $(INIT_DEFS) -c $<
-
-$(STAGE1OBJS-CDROM): %-CDROM.o: %.c
- $(COMPILE) $(INCLUDES) $(CDROM_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-DISK): %-DISK.o: %.c
- $(COMPILE) $(INCLUDES) $(DISK_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-NETWORK): %-NETWORK.o: %.c
- $(COMPILE) $(INCLUDES) $(NETWORK_DEFS) $(PCMCIA_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-USB): %-USB.o: %.c
- $(COMPILE) $(INCLUDES) $(USB_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-FULL): %-FULL.o: %.c
- $(COMPILE) $(INCLUDES) $(USB_DEFS_GEN) $(PCMCIA_DEFS) -c $< -o $@
-
-.c.o:
- $(COMPILE) $(INCLUDES) -c $<
-
-
-clean:
- @for n in $(DIRS); do \
- (cd $$n; make clean) \
- done
- rm -f *.o .depend *.rdz *.img rescue-gui $(BINS)
-
-
-tar-mkinitrd_helper: clean
- rm -rf mkinitrd_helper-subdir
- mkdir mkinitrd_helper-subdir
- cd mkinitrd_helper-subdir ; cp -a ../dietlibc ../insmod-busybox ../Makefile.common ../insmod.h ../log.h . ; \
- cp ../Makefile.mkinitrd_helper Makefile
- tar cfj mkinitrd_helper.tar.bz2 mkinitrd_helper-subdir --exclude CVS
- rm -rf mkinitrd_helper-subdir
-
-rescue-gui: rescue-gui.o frontend-common.o $(FRONTEND_LINK) $(STAGE1_LIBC)
- $(CC) $(LDFLAGS_STAGE1) -o $@ $^
- $(STRIPCMD) $@
-
-
-.depend:
- $(CPP) $(CFLAGS) -M $(ALLSRC) > .depend
-
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-
-*-CDROM.o: %-CDROM.o: %.o
-
-*-DISK.o: %-DISK.o: %.o
-
-*-NETWORK.o: %-NETWORK.o: %.o
-
-*-USB.o: %-USB.o: %.o
-
-*-FULL.o: %-FULL.o: %.o
-
diff --git a/mdk-stage1/Makefile.common b/mdk-stage1/Makefile.common
deleted file mode 100644
index 7506c1381..000000000
--- a/mdk-stage1/Makefile.common
+++ /dev/null
@@ -1,57 +0,0 @@
- # -*- makefile -*-
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
- #- default lib is dietlibc (honoured by main Makefile whenever possible)
-L = DIETLIBC
-#L = GLIBC
-
- #- default frontend is newt (honoured by main Makefile whenever possible)
-F = NEWT
-# F = STDIO
-
- #- override in some situations
-ifeq (ia64, $(ARCH))
-L = GLIBC
-endif
-ifeq (ppc, $(ARCH))
-L = GLIBC
-endif
-
-
- #- flags used by all stuff
-ifeq (ppc, $(ARCH))
-CFLAGS = -Os -pipe -Wall -fomit-frame-pointer
-else
-CFLAGS = -Os -pipe -Wall -Werror -W -fomit-frame-pointer
-endif
-
-DIETLIBC_INCLUDES = -I$(top_dir)/dietlibc/include -I. -I$(top_dir)/bzlib
-GLIBC_INCLUDES = -I. -I$(top_dir)/bzlib
-INCLUDES = $($(L)_INCLUDES)
-
-GLIBC_LDFLAGS_STAGE1 = -static
-DIETLIBC_LDFLAGS_STAGE1 = -nostdlib $(top_dir)/dietlibc/bin-$(ARCH)/start.o
-LDFLAGS_STAGE1 = $($(L)_LDFLAGS_STAGE1)
-
-GLIBC_LIBC =
-DIETLIBC_LIBC = $(top_dir)/dietlibc/bin-$(ARCH)/dietlibc.a
-STAGE1_LIBC = $($(L)_LIBC)
-
-STRIPCMD = strip -R .note -R .comment
-
diff --git a/mdk-stage1/Makefile.mkinitrd_helper b/mdk-stage1/Makefile.mkinitrd_helper
deleted file mode 100644
index 72bef595f..000000000
--- a/mdk-stage1/Makefile.mkinitrd_helper
+++ /dev/null
@@ -1,30 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-DIRS = dietlibc insmod-busybox
-
-
-all: dirs
-
-dirs:
- @for n in . $(DIRS); do \
- [ "$$n" = "." ] || make -C $$n ;\
- done
-
-clean:
- @for n in $(DIRS); do \
- (cd $$n; make clean) \
- done
diff --git a/mdk-stage1/adsl.c b/mdk-stage1/adsl.c
deleted file mode 100644
index d542f2f35..000000000
--- a/mdk-stage1/adsl.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <sys/ioctl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <resolv.h>
-#include <signal.h>
-
-#include "stage1.h"
-#include "log.h"
-#include "network.h"
-#include "modules.h"
-#include "tools.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "adsl.h"
-
-
-static enum return_type adsl_connect(char * net_device, char * username, char * password)
-{
- char pppoe_call[500];
- char * pppd_launch[] = { "/sbin/pppd", "pty", pppoe_call, "noipdefault", "noauth", "default-asyncmap", "defaultroute",
- "hide-password", "nodetach", "usepeerdns", "local", "mtu", "1492", "mru", "1492", "noaccomp",
- "noccp", "nobsdcomp", "nodeflate", "nopcomp", "novj", "novjccomp", "user", username,
- "password", password, "lcp-echo-interval", "20", "lcp-echo-failure", "3", "lock", "persist", NULL };
- int fd;
- int retries = 10;
- char * tty_adsl = "/dev/tty6";
- enum return_type status = RETURN_ERROR;
- pid_t ppp_pid;
-
- snprintf(pppoe_call, sizeof(pppoe_call), "/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I %s -T 80 -U -m 1412", net_device);
-
-
- fd = open(tty_adsl, O_RDWR);
- if (fd == -1) {
- log_message("cannot open tty -- no pppd");
- return RETURN_ERROR;
- }
- else if (access(pppd_launch[0], X_OK)) {
- log_message("cannot open pppd - %s doesn't exist", pppd_launch[0]);
- return RETURN_ERROR;
- }
-
- if (!(ppp_pid = fork())) {
- dup2(fd, 0);
- dup2(fd, 1);
- dup2(fd, 2);
-
- close(fd);
- setsid();
- if (ioctl(0, TIOCSCTTY, NULL))
- log_perror("could not set new controlling tty");
-
- printf("\t(exec of pppd)\n");
- execve(pppd_launch[0], pppd_launch, grab_env());
- log_message("execve of %s failed: %s", pppd_launch[0], strerror(errno));
- exit(-1);
- }
- close(fd);
- while (retries > 0 && kill(ppp_pid, 0) == 0) {
- FILE * f;
- if ((f = fopen("/var/run/pppd.tdb", "rb"))) {
- while (1) {
- char buf[500];
- if (!fgets(buf, sizeof(buf), f))
- break;
- if (strstr(buf, "IPLOCAL="))
- status = RETURN_OK;
- }
- fclose(f);
- if (status == RETURN_OK) {
- log_message("PPP: connected!");
- break;
- }
- }
- retries--;
- log_message("PPP: <sleep>");
- sleep(2);
- }
-
- if (status != RETURN_OK) {
- log_message("PPP: could not connect");
- kill(ppp_pid, SIGTERM);
- sleep(1);
- kill(ppp_pid, SIGKILL);
- sleep(1);
- }
- return status;
-}
-
-
-enum return_type perform_adsl(struct interface_info * intf)
-{
- struct in_addr addr;
- char * questions[] = { "Username", "Password", NULL };
- char * questions_auto[] = { "adsluser", "adslpass", NULL };
- static char ** answers = NULL;
- enum return_type results;
-
- inet_aton("10.0.0.10", &addr);
- memcpy(&intf->ip, &addr, sizeof(addr));
-
- inet_aton("255.255.255.0", &addr);
- memcpy(&intf->netmask, &addr, sizeof(addr));
-
- *((uint32_t *) &intf->broadcast) = (*((uint32_t *) &intf->ip) &
- *((uint32_t *) &intf->netmask)) | ~(*((uint32_t *) &intf->netmask));
-
- intf->is_ptp = 0;
-
- if (configure_net_device(intf)) {
- stg1_error_message("Could not configure..");
- return RETURN_ERROR;
- }
-
- results = ask_from_entries_auto("Please enter the username and password for your ADSL account.\n"
- "(Warning! only PPPoE protocol is supported)",
- questions, &answers, 40, questions_auto, NULL);
- if (results != RETURN_OK)
- return results;
-
- intf->boot_proto = BOOTPROTO_ADSL_PPPOE;
-
- wait_message("Waiting for ADSL connection to show up...");
- my_insmod("ppp_generic", ANY_DRIVER_TYPE, NULL);
- my_insmod("ppp_async", ANY_DRIVER_TYPE, NULL);
- my_insmod("ppp", ANY_DRIVER_TYPE, NULL);
- results = adsl_connect(intf->device, answers[0], answers[1]);
- remove_wait_message();
-
- if (results != RETURN_OK) {
- wait_message("Retrying the ADSL connection...");
- results = adsl_connect(intf->device, answers[0], answers[1]);
- remove_wait_message();
- } else {
- intf->user = strdup(answers[0]);
- intf->pass = strdup(answers[1]);
- }
-
- if (results != RETURN_OK) {
- stg1_error_message("I could not connect to the ADSL network.");
- return perform_adsl(intf);
- }
-
- sleep(1);
- res_init(); /* reinit the resolver, pppd modified /etc/resolv.conf */
-
- return RETURN_OK;
-}
diff --git a/mdk-stage1/adsl.h b/mdk-stage1/adsl.h
deleted file mode 100644
index 9d32cc631..000000000
--- a/mdk-stage1/adsl.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * View the homepage: http://us.mandrakesoft.com/~gc/html/stage1.html
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from GRUB -- GRand Unified Bootloader
- * Copyright (C) 2000 Free Software Foundation, Inc.
- *
- * Itself based on etherboot-4.6.4 by Martin Renters.
- *
- */
-
-#ifndef _ADSL_H_
-#define _ADSL_H_
-
-#include "stage1.h"
-#include "network.h"
-
-enum return_type perform_adsl(struct interface_info * intf);
-
-#endif
diff --git a/mdk-stage1/automatic.c b/mdk-stage1/automatic.c
deleted file mode 100644
index 1c6e021a0..000000000
--- a/mdk-stage1/automatic.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This is supposed to replace the redhat "kickstart", by name but
- * also by design (less code pollution).
- *
- */
-
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include "tools.h"
-#include "stage1.h"
-#include "frontend.h"
-#include "log.h"
-
-#include "automatic.h"
-
-
-static struct param_elem * automatic_params;
-static char * value_not_bound = "";
-
-void grab_automatic_params(char * line)
-{
- int i, p;
- struct param_elem tmp_params[50];
-
- i = 0; p = 0;
- while (line[i] != '\0') {
- char *name, *value;
- int k;
- int j = i;
- while (line[i] != ':' && line[i] != '\0')
- i++;
- name = memdup(&line[j], i-j + 1);
- name[i-j] = 0;
-
- k = i+1;
- i++;
- while (line[i] != ',' && line[i] != '\0')
- i++;
- value = memdup(&line[k], i-k + 1);
- value[i-k] = 0;
-
- tmp_params[p].name = name;
- tmp_params[p].value = value;
- p++;
- if (line[i] == '\0')
- break;
- i++;
- }
-
- tmp_params[p++].name = NULL;
- automatic_params = memdup(tmp_params, sizeof(struct param_elem) * p);
-
- log_message("AUTOMATIC MODE: got %d params", p-1);
-}
-
-
-char * get_auto_value(char * auto_param)
-{
- struct param_elem * ptr = automatic_params;
-
- struct param_elem short_aliases[] =
- { { "method", "met" }, { "network", "netw" }, { "interface", "int" }, { "gateway", "gat" },
- { "netmask", "netm" }, { "adsluser", "adslu" }, { "adslpass", "adslp" }, { "hostname", "hos" },
- { "domain", "dom" }, { "server", "ser" }, { "directory", "dir" }, { "user", "use" },
- { "pass", "pas" }, { "disk", "dis" }, { "partition", "par" }, { NULL, NULL } };
- struct param_elem * ptr_alias = short_aliases;
- while (ptr_alias->name) {
- if (streq(auto_param, ptr_alias->name))
- break;
- ptr_alias++;
- }
-
- while (ptr->name) {
- if (streq(ptr->name, auto_param)
- || (ptr_alias->name && streq(ptr_alias->value, ptr->name)))
- return ptr->value;
- ptr++;
- }
-
- return value_not_bound;
-}
-
-
-enum return_type ask_from_list_auto(char *msg, char ** elems, char ** choice, char * auto_param, char ** elems_auto)
-{
- if (!IS_AUTOMATIC)
- return ask_from_list(msg, elems, choice);
- else {
- char ** sav_elems = elems;
- char * tmp = get_auto_value(auto_param);
- while (elems && *elems) {
- if (!strcmp(tmp, *elems_auto)) {
- *choice = *elems;
- log_message("AUTOMATIC: parameter %s for %s means returning %s", tmp, auto_param, *elems);
- return RETURN_OK;
- }
- elems++;
- elems_auto++;
- }
- unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
- return ask_from_list(msg, sav_elems, choice);
- }
-}
-
-enum return_type ask_from_list_comments_auto(char *msg, char ** elems, char ** elems_comments, char ** choice, char * auto_param, char ** elems_auto)
-{
- if (!IS_AUTOMATIC)
- return ask_from_list_comments(msg, elems, elems_comments, choice);
- else {
- char ** sav_elems = elems;
- char * tmp = get_auto_value(auto_param);
- while (elems && *elems) {
- if (!strcmp(tmp, *elems_auto)) {
- *choice = *elems;
- log_message("AUTOMATIC: parameter %s for %s means returning %s", tmp, auto_param, *elems);
- return RETURN_OK;
- }
- elems++;
- elems_auto++;
- }
- unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
- return ask_from_list_comments(msg, sav_elems, elems_comments, choice);
- }
-}
-
-
-enum return_type ask_from_entries_auto(char *msg, char ** questions, char *** answers, int entry_size, char ** questions_auto, void (*callback_func)(char ** strings))
-{
- if (!IS_AUTOMATIC)
- return ask_from_entries(msg, questions, answers, entry_size, callback_func);
- else {
- char * tmp_answers[50];
- int i = 0;
- while (questions && *questions) {
- tmp_answers[i] = get_auto_value(*questions_auto);
- log_message("AUTOMATIC: question %s answers %s because of param %s", *questions, tmp_answers[i], *questions_auto);
- i++;
- questions++;
- questions_auto++;
-
- }
- *answers = memdup(tmp_answers, sizeof(char *) * i);
- return RETURN_OK;
- }
-}
diff --git a/mdk-stage1/automatic.h b/mdk-stage1/automatic.h
deleted file mode 100644
index c2ac0a73d..000000000
--- a/mdk-stage1/automatic.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This is supposed to replace the redhat "kickstart", by name but
- * also by design (no code pollution).
- *
- */
-
-#ifndef _AUTOMATIC_H_
-#define _AUTOMATIC_H_
-
-#include "stage1.h"
-
-void grab_automatic_params(char * line);
-
-enum return_type ask_from_list_auto(char *msg, char ** elems, char ** choice, char * auto_param, char ** elems_auto);
-enum return_type ask_from_list_comments_auto(char *msg, char ** elems, char ** elems_comments, char ** choice, char * auto_param, char ** elems_auto);
-enum return_type ask_from_entries_auto(char *msg, char ** questions, char *** answers, int entry_size, char ** questions_auto, void (*callback_func)(char ** strings));
-
-#endif
diff --git a/mdk-stage1/bzlib/Makefile b/mdk-stage1/bzlib/Makefile
deleted file mode 100644
index 03a2c254b..000000000
--- a/mdk-stage1/bzlib/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libbzlib
-
-OBJS = blocksort.o bzlib.o compress.o crctable.o decompress.o huffman.o randtable.o
-
-DEFS =
-
-INCS =
-
-
-TARGETS = $(LIBNAME).a
-
-ifeq (DIETLIBC, $(L))
-TARGETS += $(LIBNAME)-DIET.a
-endif
-
-all: $(TARGETS)
-
-clean:
- rm -f *.o *.a
-
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-$(LIBNAME).a: $(OBJS)
- ar -cru $@ $^
- ranlib $@
-
-$(LIBNAME)-DIET.a: $(OBJS-DIET)
- ar -cru $@ $^
- ranlib $@
-
-$(OBJS): %.o: %.c
- $(CC) $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
- $(CC) $(CFLAGS) $(DEFS) $(INCS) $(DIETLIBC_INCLUDES) -c $< -o $@
diff --git a/mdk-stage1/bzlib/blocksort.c b/mdk-stage1/bzlib/blocksort.c
deleted file mode 100644
index c1b78c483..000000000
--- a/mdk-stage1/bzlib/blocksort.c
+++ /dev/null
@@ -1,1138 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Block sorting machinery ---*/
-/*--- blocksort.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2000 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
-
- To get some idea how the block sorting algorithms in this file
- work, read my paper
- On the Performance of BWT Sorting Algorithms
- in Proceedings of the IEEE Data Compression Conference 2000,
- Snowbird, Utah, USA, 27-30 March 2000. The main sort in this
- file implements the algorithm called cache in the paper.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*---------------------------------------------*/
-/*--- Fallback O(N log(N)^2) sorting ---*/
-/*--- algorithm, for repetitive blocks ---*/
-/*---------------------------------------------*/
-
-/*---------------------------------------------*/
-static
-__inline__
-void fallbackSimpleSort ( UInt32* fmap,
- UInt32* eclass,
- Int32 lo,
- Int32 hi )
-{
- Int32 i, j, tmp;
- UInt32 ec_tmp;
-
- if (lo == hi) return;
-
- if (hi - lo > 3) {
- for ( i = hi-4; i >= lo; i-- ) {
- tmp = fmap[i];
- ec_tmp = eclass[tmp];
- for ( j = i+4; j <= hi && ec_tmp > eclass[fmap[j]]; j += 4 )
- fmap[j-4] = fmap[j];
- fmap[j-4] = tmp;
- }
- }
-
- for ( i = hi-1; i >= lo; i-- ) {
- tmp = fmap[i];
- ec_tmp = eclass[tmp];
- for ( j = i+1; j <= hi && ec_tmp > eclass[fmap[j]]; j++ )
- fmap[j-1] = fmap[j];
- fmap[j-1] = tmp;
- }
-}
-
-
-/*---------------------------------------------*/
-#define fswap(zz1, zz2) \
- { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
-
-#define fvswap(zzp1, zzp2, zzn) \
-{ \
- Int32 yyp1 = (zzp1); \
- Int32 yyp2 = (zzp2); \
- Int32 yyn = (zzn); \
- while (yyn > 0) { \
- fswap(fmap[yyp1], fmap[yyp2]); \
- yyp1++; yyp2++; yyn--; \
- } \
-}
-
-
-#define fmin(a,b) ((a) < (b)) ? (a) : (b)
-
-#define fpush(lz,hz) { stackLo[sp] = lz; \
- stackHi[sp] = hz; \
- sp++; }
-
-#define fpop(lz,hz) { sp--; \
- lz = stackLo[sp]; \
- hz = stackHi[sp]; }
-
-#define FALLBACK_QSORT_SMALL_THRESH 10
-#define FALLBACK_QSORT_STACK_SIZE 100
-
-
-static
-void fallbackQSort3 ( UInt32* fmap,
- UInt32* eclass,
- Int32 loSt,
- Int32 hiSt )
-{
- Int32 unLo, unHi, ltLo, gtHi, n, m;
- Int32 sp, lo, hi;
- UInt32 med, r, r3;
- Int32 stackLo[FALLBACK_QSORT_STACK_SIZE];
- Int32 stackHi[FALLBACK_QSORT_STACK_SIZE];
-
- r = 0;
-
- sp = 0;
- fpush ( loSt, hiSt );
-
- while (sp > 0) {
-
- AssertH ( sp < FALLBACK_QSORT_STACK_SIZE, 1004 );
-
- fpop ( lo, hi );
- if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) {
- fallbackSimpleSort ( fmap, eclass, lo, hi );
- continue;
- }
-
- /* Random partitioning. Median of 3 sometimes fails to
- avoid bad cases. Median of 9 seems to help but
- looks rather expensive. This too seems to work but
- is cheaper. Guidance for the magic constants
- 7621 and 32768 is taken from Sedgewick's algorithms
- book, chapter 35.
- */
- r = ((r * 7621) + 1) % 32768;
- r3 = r % 3;
- if (r3 == 0) med = eclass[fmap[lo]]; else
- if (r3 == 1) med = eclass[fmap[(lo+hi)>>1]]; else
- med = eclass[fmap[hi]];
-
- unLo = ltLo = lo;
- unHi = gtHi = hi;
-
- while (1) {
- while (1) {
- if (unLo > unHi) break;
- n = (Int32)eclass[fmap[unLo]] - (Int32)med;
- if (n == 0) {
- fswap(fmap[unLo], fmap[ltLo]);
- ltLo++; unLo++;
- continue;
- };
- if (n > 0) break;
- unLo++;
- }
- while (1) {
- if (unLo > unHi) break;
- n = (Int32)eclass[fmap[unHi]] - (Int32)med;
- if (n == 0) {
- fswap(fmap[unHi], fmap[gtHi]);
- gtHi--; unHi--;
- continue;
- };
- if (n < 0) break;
- unHi--;
- }
- if (unLo > unHi) break;
- fswap(fmap[unLo], fmap[unHi]); unLo++; unHi--;
- }
-
- AssertD ( unHi == unLo-1, "fallbackQSort3(2)" );
-
- if (gtHi < ltLo) continue;
-
- n = fmin(ltLo-lo, unLo-ltLo); fvswap(lo, unLo-n, n);
- m = fmin(hi-gtHi, gtHi-unHi); fvswap(unLo, hi-m+1, m);
-
- n = lo + unLo - ltLo - 1;
- m = hi - (gtHi - unHi) + 1;
-
- if (n - lo > hi - m) {
- fpush ( lo, n );
- fpush ( m, hi );
- } else {
- fpush ( m, hi );
- fpush ( lo, n );
- }
- }
-}
-
-#undef fmin
-#undef fpush
-#undef fpop
-#undef fswap
-#undef fvswap
-#undef FALLBACK_QSORT_SMALL_THRESH
-#undef FALLBACK_QSORT_STACK_SIZE
-
-
-/*---------------------------------------------*/
-/* Pre:
- nblock > 0
- eclass exists for [0 .. nblock-1]
- ((UChar*)eclass) [0 .. nblock-1] holds block
- ptr exists for [0 .. nblock-1]
-
- Post:
- ((UChar*)eclass) [0 .. nblock-1] holds block
- All other areas of eclass destroyed
- fmap [0 .. nblock-1] holds sorted order
- bhtab [ 0 .. 2+(nblock/32) ] destroyed
-*/
-
-#define SET_BH(zz) bhtab[(zz) >> 5] |= (1 << ((zz) & 31))
-#define CLEAR_BH(zz) bhtab[(zz) >> 5] &= ~(1 << ((zz) & 31))
-#define ISSET_BH(zz) (bhtab[(zz) >> 5] & (1 << ((zz) & 31)))
-#define WORD_BH(zz) bhtab[(zz) >> 5]
-#define UNALIGNED_BH(zz) ((zz) & 0x01f)
-
-static
-void fallbackSort ( UInt32* fmap,
- UInt32* eclass,
- UInt32* bhtab,
- Int32 nblock,
- Int32 verb )
-{
- Int32 ftab[257];
- Int32 ftabCopy[256];
- Int32 H, i, j, k, l, r, cc, cc1;
- Int32 nNotDone;
- Int32 nBhtab;
- UChar* eclass8 = (UChar*)eclass;
-
- /*--
- Initial 1-char radix sort to generate
- initial fmap and initial BH bits.
- --*/
- if (verb >= 4)
- VPrintf0 ( " bucket sorting ...\n" );
- for (i = 0; i < 257; i++) ftab[i] = 0;
- for (i = 0; i < nblock; i++) ftab[eclass8[i]]++;
- for (i = 0; i < 256; i++) ftabCopy[i] = ftab[i];
- for (i = 1; i < 257; i++) ftab[i] += ftab[i-1];
-
- for (i = 0; i < nblock; i++) {
- j = eclass8[i];
- k = ftab[j] - 1;
- ftab[j] = k;
- fmap[k] = i;
- }
-
- nBhtab = 2 + (nblock / 32);
- for (i = 0; i < nBhtab; i++) bhtab[i] = 0;
- for (i = 0; i < 256; i++) SET_BH(ftab[i]);
-
- /*--
- Inductively refine the buckets. Kind-of an
- "exponential radix sort" (!), inspired by the
- Manber-Myers suffix array construction algorithm.
- --*/
-
- /*-- set sentinel bits for block-end detection --*/
- for (i = 0; i < 32; i++) {
- SET_BH(nblock + 2*i);
- CLEAR_BH(nblock + 2*i + 1);
- }
-
- /*-- the log(N) loop --*/
- H = 1;
- while (1) {
-
- if (verb >= 4)
- VPrintf1 ( " depth %6d has ", H );
-
- j = 0;
- for (i = 0; i < nblock; i++) {
- if (ISSET_BH(i)) j = i;
- k = fmap[i] - H; if (k < 0) k += nblock;
- eclass[k] = j;
- }
-
- nNotDone = 0;
- r = -1;
- while (1) {
-
- /*-- find the next non-singleton bucket --*/
- k = r + 1;
- while (ISSET_BH(k) && UNALIGNED_BH(k)) k++;
- if (ISSET_BH(k)) {
- while (WORD_BH(k) == 0xffffffff) k += 32;
- while (ISSET_BH(k)) k++;
- }
- l = k - 1;
- if (l >= nblock) break;
- while (!ISSET_BH(k) && UNALIGNED_BH(k)) k++;
- if (!ISSET_BH(k)) {
- while (WORD_BH(k) == 0x00000000) k += 32;
- while (!ISSET_BH(k)) k++;
- }
- r = k - 1;
- if (r >= nblock) break;
-
- /*-- now [l, r] bracket current bucket --*/
- if (r > l) {
- nNotDone += (r - l + 1);
- fallbackQSort3 ( fmap, eclass, l, r );
-
- /*-- scan bucket and generate header bits-- */
- cc = -1;
- for (i = l; i <= r; i++) {
- cc1 = eclass[fmap[i]];
- if (cc != cc1) { SET_BH(i); cc = cc1; };
- }
- }
- }
-
- if (verb >= 4)
- VPrintf1 ( "%6d unresolved strings\n", nNotDone );
-
- H *= 2;
- if (H > nblock || nNotDone == 0) break;
- }
-
- /*--
- Reconstruct the original block in
- eclass8 [0 .. nblock-1], since the
- previous phase destroyed it.
- --*/
- if (verb >= 4)
- VPrintf0 ( " reconstructing block ...\n" );
- j = 0;
- for (i = 0; i < nblock; i++) {
- while (ftabCopy[j] == 0) j++;
- ftabCopy[j]--;
- eclass8[fmap[i]] = (UChar)j;
- }
- AssertH ( j < 256, 1005 );
-}
-
-#undef SET_BH
-#undef CLEAR_BH
-#undef ISSET_BH
-#undef WORD_BH
-#undef UNALIGNED_BH
-
-
-/*---------------------------------------------*/
-/*--- The main, O(N^2 log(N)) sorting ---*/
-/*--- algorithm. Faster for "normal" ---*/
-/*--- non-repetitive blocks. ---*/
-/*---------------------------------------------*/
-
-/*---------------------------------------------*/
-static
-__inline__
-Bool mainGtU ( UInt32 i1,
- UInt32 i2,
- UChar* block,
- UInt16* quadrant,
- UInt32 nblock,
- Int32* budget )
-{
- Int32 k;
- UChar c1, c2;
- UInt16 s1, s2;
-
- AssertD ( i1 != i2, "mainGtU" );
- /* 1 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 2 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 3 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 4 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 5 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 6 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 7 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 8 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 9 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 10 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 11 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
- /* 12 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- i1++; i2++;
-
- k = nblock + 8;
-
- do {
- /* 1 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- s1 = quadrant[i1]; s2 = quadrant[i2];
- if (s1 != s2) return (s1 > s2);
- i1++; i2++;
- /* 2 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- s1 = quadrant[i1]; s2 = quadrant[i2];
- if (s1 != s2) return (s1 > s2);
- i1++; i2++;
- /* 3 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- s1 = quadrant[i1]; s2 = quadrant[i2];
- if (s1 != s2) return (s1 > s2);
- i1++; i2++;
- /* 4 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- s1 = quadrant[i1]; s2 = quadrant[i2];
- if (s1 != s2) return (s1 > s2);
- i1++; i2++;
- /* 5 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- s1 = quadrant[i1]; s2 = quadrant[i2];
- if (s1 != s2) return (s1 > s2);
- i1++; i2++;
- /* 6 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- s1 = quadrant[i1]; s2 = quadrant[i2];
- if (s1 != s2) return (s1 > s2);
- i1++; i2++;
- /* 7 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- s1 = quadrant[i1]; s2 = quadrant[i2];
- if (s1 != s2) return (s1 > s2);
- i1++; i2++;
- /* 8 */
- c1 = block[i1]; c2 = block[i2];
- if (c1 != c2) return (c1 > c2);
- s1 = quadrant[i1]; s2 = quadrant[i2];
- if (s1 != s2) return (s1 > s2);
- i1++; i2++;
-
- if (i1 >= nblock) i1 -= nblock;
- if (i2 >= nblock) i2 -= nblock;
-
- k -= 8;
- (*budget)--;
- }
- while (k >= 0);
-
- return False;
-}
-
-
-/*---------------------------------------------*/
-/*--
- Knuth's increments seem to work better
- than Incerpi-Sedgewick here. Possibly
- because the number of elems to sort is
- usually small, typically <= 20.
---*/
-static
-Int32 incs[14] = { 1, 4, 13, 40, 121, 364, 1093, 3280,
- 9841, 29524, 88573, 265720,
- 797161, 2391484 };
-
-static
-void mainSimpleSort ( UInt32* ptr,
- UChar* block,
- UInt16* quadrant,
- Int32 nblock,
- Int32 lo,
- Int32 hi,
- Int32 d,
- Int32* budget )
-{
- Int32 i, j, h, bigN, hp;
- UInt32 v;
-
- bigN = hi - lo + 1;
- if (bigN < 2) return;
-
- hp = 0;
- while (incs[hp] < bigN) hp++;
- hp--;
-
- for (; hp >= 0; hp--) {
- h = incs[hp];
-
- i = lo + h;
- while (True) {
-
- /*-- copy 1 --*/
- if (i > hi) break;
- v = ptr[i];
- j = i;
- while ( mainGtU (
- ptr[j-h]+d, v+d, block, quadrant, nblock, budget
- ) ) {
- ptr[j] = ptr[j-h];
- j = j - h;
- if (j <= (lo + h - 1)) break;
- }
- ptr[j] = v;
- i++;
-
- /*-- copy 2 --*/
- if (i > hi) break;
- v = ptr[i];
- j = i;
- while ( mainGtU (
- ptr[j-h]+d, v+d, block, quadrant, nblock, budget
- ) ) {
- ptr[j] = ptr[j-h];
- j = j - h;
- if (j <= (lo + h - 1)) break;
- }
- ptr[j] = v;
- i++;
-
- /*-- copy 3 --*/
- if (i > hi) break;
- v = ptr[i];
- j = i;
- while ( mainGtU (
- ptr[j-h]+d, v+d, block, quadrant, nblock, budget
- ) ) {
- ptr[j] = ptr[j-h];
- j = j - h;
- if (j <= (lo + h - 1)) break;
- }
- ptr[j] = v;
- i++;
-
- if (*budget < 0) return;
- }
- }
-}
-
-
-/*---------------------------------------------*/
-/*--
- The following is an implementation of
- an elegant 3-way quicksort for strings,
- described in a paper "Fast Algorithms for
- Sorting and Searching Strings", by Robert
- Sedgewick and Jon L. Bentley.
---*/
-
-#define mswap(zz1, zz2) \
- { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
-
-#define mvswap(zzp1, zzp2, zzn) \
-{ \
- Int32 yyp1 = (zzp1); \
- Int32 yyp2 = (zzp2); \
- Int32 yyn = (zzn); \
- while (yyn > 0) { \
- mswap(ptr[yyp1], ptr[yyp2]); \
- yyp1++; yyp2++; yyn--; \
- } \
-}
-
-static
-__inline__
-UChar mmed3 ( UChar a, UChar b, UChar c )
-{
- UChar t;
- if (a > b) { t = a; a = b; b = t; };
- if (b > c) {
- b = c;
- if (a > b) b = a;
- }
- return b;
-}
-
-#define mmin(a,b) ((a) < (b)) ? (a) : (b)
-
-#define mpush(lz,hz,dz) { stackLo[sp] = lz; \
- stackHi[sp] = hz; \
- stackD [sp] = dz; \
- sp++; }
-
-#define mpop(lz,hz,dz) { sp--; \
- lz = stackLo[sp]; \
- hz = stackHi[sp]; \
- dz = stackD [sp]; }
-
-
-#define mnextsize(az) (nextHi[az]-nextLo[az])
-
-#define mnextswap(az,bz) \
- { Int32 tz; \
- tz = nextLo[az]; nextLo[az] = nextLo[bz]; nextLo[bz] = tz; \
- tz = nextHi[az]; nextHi[az] = nextHi[bz]; nextHi[bz] = tz; \
- tz = nextD [az]; nextD [az] = nextD [bz]; nextD [bz] = tz; }
-
-
-#define MAIN_QSORT_SMALL_THRESH 20
-#define MAIN_QSORT_DEPTH_THRESH (BZ_N_RADIX + BZ_N_QSORT)
-#define MAIN_QSORT_STACK_SIZE 100
-
-static
-void mainQSort3 ( UInt32* ptr,
- UChar* block,
- UInt16* quadrant,
- Int32 nblock,
- Int32 loSt,
- Int32 hiSt,
- Int32 dSt,
- Int32* budget )
-{
- Int32 unLo, unHi, ltLo, gtHi, n, m, med;
- Int32 sp, lo, hi, d;
-
- Int32 stackLo[MAIN_QSORT_STACK_SIZE];
- Int32 stackHi[MAIN_QSORT_STACK_SIZE];
- Int32 stackD [MAIN_QSORT_STACK_SIZE];
-
- Int32 nextLo[3];
- Int32 nextHi[3];
- Int32 nextD [3];
-
- sp = 0;
- mpush ( loSt, hiSt, dSt );
-
- while (sp > 0) {
-
- AssertH ( sp < MAIN_QSORT_STACK_SIZE, 1001 );
-
- mpop ( lo, hi, d );
- if (hi - lo < MAIN_QSORT_SMALL_THRESH ||
- d > MAIN_QSORT_DEPTH_THRESH) {
- mainSimpleSort ( ptr, block, quadrant, nblock, lo, hi, d, budget );
- if (*budget < 0) return;
- continue;
- }
-
- med = (Int32)
- mmed3 ( block[ptr[ lo ]+d],
- block[ptr[ hi ]+d],
- block[ptr[ (lo+hi)>>1 ]+d] );
-
- unLo = ltLo = lo;
- unHi = gtHi = hi;
-
- while (True) {
- while (True) {
- if (unLo > unHi) break;
- n = ((Int32)block[ptr[unLo]+d]) - med;
- if (n == 0) {
- mswap(ptr[unLo], ptr[ltLo]);
- ltLo++; unLo++; continue;
- };
- if (n > 0) break;
- unLo++;
- }
- while (True) {
- if (unLo > unHi) break;
- n = ((Int32)block[ptr[unHi]+d]) - med;
- if (n == 0) {
- mswap(ptr[unHi], ptr[gtHi]);
- gtHi--; unHi--; continue;
- };
- if (n < 0) break;
- unHi--;
- }
- if (unLo > unHi) break;
- mswap(ptr[unLo], ptr[unHi]); unLo++; unHi--;
- }
-
- AssertD ( unHi == unLo-1, "mainQSort3(2)" );
-
- if (gtHi < ltLo) {
- mpush(lo, hi, d+1 );
- continue;
- }
-
- n = mmin(ltLo-lo, unLo-ltLo); mvswap(lo, unLo-n, n);
- m = mmin(hi-gtHi, gtHi-unHi); mvswap(unLo, hi-m+1, m);
-
- n = lo + unLo - ltLo - 1;
- m = hi - (gtHi - unHi) + 1;
-
- nextLo[0] = lo; nextHi[0] = n; nextD[0] = d;
- nextLo[1] = m; nextHi[1] = hi; nextD[1] = d;
- nextLo[2] = n+1; nextHi[2] = m-1; nextD[2] = d+1;
-
- if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
- if (mnextsize(1) < mnextsize(2)) mnextswap(1,2);
- if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
-
- AssertD (mnextsize(0) >= mnextsize(1), "mainQSort3(8)" );
- AssertD (mnextsize(1) >= mnextsize(2), "mainQSort3(9)" );
-
- mpush (nextLo[0], nextHi[0], nextD[0]);
- mpush (nextLo[1], nextHi[1], nextD[1]);
- mpush (nextLo[2], nextHi[2], nextD[2]);
- }
-}
-
-#undef mswap
-#undef mvswap
-#undef mpush
-#undef mpop
-#undef mmin
-#undef mnextsize
-#undef mnextswap
-#undef MAIN_QSORT_SMALL_THRESH
-#undef MAIN_QSORT_DEPTH_THRESH
-#undef MAIN_QSORT_STACK_SIZE
-
-
-/*---------------------------------------------*/
-/* Pre:
- nblock > N_OVERSHOOT
- block32 exists for [0 .. nblock-1 +N_OVERSHOOT]
- ((UChar*)block32) [0 .. nblock-1] holds block
- ptr exists for [0 .. nblock-1]
-
- Post:
- ((UChar*)block32) [0 .. nblock-1] holds block
- All other areas of block32 destroyed
- ftab [0 .. 65536 ] destroyed
- ptr [0 .. nblock-1] holds sorted order
- if (*budget < 0), sorting was abandoned
-*/
-
-#define BIGFREQ(b) (ftab[((b)+1) << 8] - ftab[(b) << 8])
-#define SETMASK (1 << 21)
-#define CLEARMASK (~(SETMASK))
-
-static
-void mainSort ( UInt32* ptr,
- UChar* block,
- UInt16* quadrant,
- UInt32* ftab,
- Int32 nblock,
- Int32 verb,
- Int32* budget )
-{
- Int32 i, j, k, ss, sb;
- Int32 runningOrder[256];
- Bool bigDone[256];
- Int32 copyStart[256];
- Int32 copyEnd [256];
- UChar c1;
- Int32 numQSorted;
- UInt16 s;
- if (verb >= 4) VPrintf0 ( " main sort initialise ...\n" );
-
- /*-- set up the 2-byte frequency table --*/
- for (i = 65536; i >= 0; i--) ftab[i] = 0;
-
- j = block[0] << 8;
- i = nblock-1;
- for (; i >= 3; i -= 4) {
- quadrant[i] = 0;
- j = (j >> 8) | ( ((UInt16)block[i]) << 8);
- ftab[j]++;
- quadrant[i-1] = 0;
- j = (j >> 8) | ( ((UInt16)block[i-1]) << 8);
- ftab[j]++;
- quadrant[i-2] = 0;
- j = (j >> 8) | ( ((UInt16)block[i-2]) << 8);
- ftab[j]++;
- quadrant[i-3] = 0;
- j = (j >> 8) | ( ((UInt16)block[i-3]) << 8);
- ftab[j]++;
- }
- for (; i >= 0; i--) {
- quadrant[i] = 0;
- j = (j >> 8) | ( ((UInt16)block[i]) << 8);
- ftab[j]++;
- }
-
- /*-- (emphasises close relationship of block & quadrant) --*/
- for (i = 0; i < BZ_N_OVERSHOOT; i++) {
- block [nblock+i] = block[i];
- quadrant[nblock+i] = 0;
- }
-
- if (verb >= 4) VPrintf0 ( " bucket sorting ...\n" );
-
- /*-- Complete the initial radix sort --*/
- for (i = 1; i <= 65536; i++) ftab[i] += ftab[i-1];
-
- s = block[0] << 8;
- i = nblock-1;
- for (; i >= 3; i -= 4) {
- s = (s >> 8) | (block[i] << 8);
- j = ftab[s] -1;
- ftab[s] = j;
- ptr[j] = i;
- s = (s >> 8) | (block[i-1] << 8);
- j = ftab[s] -1;
- ftab[s] = j;
- ptr[j] = i-1;
- s = (s >> 8) | (block[i-2] << 8);
- j = ftab[s] -1;
- ftab[s] = j;
- ptr[j] = i-2;
- s = (s >> 8) | (block[i-3] << 8);
- j = ftab[s] -1;
- ftab[s] = j;
- ptr[j] = i-3;
- }
- for (; i >= 0; i--) {
- s = (s >> 8) | (block[i] << 8);
- j = ftab[s] -1;
- ftab[s] = j;
- ptr[j] = i;
- }
-
- /*--
- Now ftab contains the first loc of every small bucket.
- Calculate the running order, from smallest to largest
- big bucket.
- --*/
- for (i = 0; i <= 255; i++) {
- bigDone [i] = False;
- runningOrder[i] = i;
- }
-
- {
- Int32 vv;
- Int32 h = 1;
- do h = 3 * h + 1; while (h <= 256);
- do {
- h = h / 3;
- for (i = h; i <= 255; i++) {
- vv = runningOrder[i];
- j = i;
- while ( BIGFREQ(runningOrder[j-h]) > BIGFREQ(vv) ) {
- runningOrder[j] = runningOrder[j-h];
- j = j - h;
- if (j <= (h - 1)) goto zero;
- }
- zero:
- runningOrder[j] = vv;
- }
- } while (h != 1);
- }
-
- /*--
- The main sorting loop.
- --*/
-
- numQSorted = 0;
-
- for (i = 0; i <= 255; i++) {
-
- /*--
- Process big buckets, starting with the least full.
- Basically this is a 3-step process in which we call
- mainQSort3 to sort the small buckets [ss, j], but
- also make a big effort to avoid the calls if we can.
- --*/
- ss = runningOrder[i];
-
- /*--
- Step 1:
- Complete the big bucket [ss] by quicksorting
- any unsorted small buckets [ss, j], for j != ss.
- Hopefully previous pointer-scanning phases have already
- completed many of the small buckets [ss, j], so
- we don't have to sort them at all.
- --*/
- for (j = 0; j <= 255; j++) {
- if (j != ss) {
- sb = (ss << 8) + j;
- if ( ! (ftab[sb] & SETMASK) ) {
- Int32 lo = ftab[sb] & CLEARMASK;
- Int32 hi = (ftab[sb+1] & CLEARMASK) - 1;
- if (hi > lo) {
- if (verb >= 4)
- VPrintf4 ( " qsort [0x%x, 0x%x] "
- "done %d this %d\n",
- ss, j, numQSorted, hi - lo + 1 );
- mainQSort3 (
- ptr, block, quadrant, nblock,
- lo, hi, BZ_N_RADIX, budget
- );
- numQSorted += (hi - lo + 1);
- if (*budget < 0) return;
- }
- }
- ftab[sb] |= SETMASK;
- }
- }
-
- AssertH ( !bigDone[ss], 1006 );
-
- /*--
- Step 2:
- Now scan this big bucket [ss] so as to synthesise the
- sorted order for small buckets [t, ss] for all t,
- including, magically, the bucket [ss,ss] too.
- This will avoid doing Real Work in subsequent Step 1's.
- --*/
- {
- for (j = 0; j <= 255; j++) {
- copyStart[j] = ftab[(j << 8) + ss] & CLEARMASK;
- copyEnd [j] = (ftab[(j << 8) + ss + 1] & CLEARMASK) - 1;
- }
- for (j = ftab[ss << 8] & CLEARMASK; j < copyStart[ss]; j++) {
- k = ptr[j]-1; if (k < 0) k += nblock;
- c1 = block[k];
- if (!bigDone[c1])
- ptr[ copyStart[c1]++ ] = k;
- }
- for (j = (ftab[(ss+1) << 8] & CLEARMASK) - 1; j > copyEnd[ss]; j--) {
- k = ptr[j]-1; if (k < 0) k += nblock;
- c1 = block[k];
- if (!bigDone[c1])
- ptr[ copyEnd[c1]-- ] = k;
- }
- }
-
- AssertH ( copyStart[ss]-1 == copyEnd[ss], 1007 );
-
- for (j = 0; j <= 255; j++) ftab[(j << 8) + ss] |= SETMASK;
-
- /*--
- Step 3:
- The [ss] big bucket is now done. Record this fact,
- and update the quadrant descriptors. Remember to
- update quadrants in the overshoot area too, if
- necessary. The "if (i < 255)" test merely skips
- this updating for the last bucket processed, since
- updating for the last bucket is pointless.
-
- The quadrant array provides a way to incrementally
- cache sort orderings, as they appear, so as to
- make subsequent comparisons in fullGtU() complete
- faster. For repetitive blocks this makes a big
- difference (but not big enough to be able to avoid
- the fallback sorting mechanism, exponential radix sort).
-
- The precise meaning is: at all times:
-
- for 0 <= i < nblock and 0 <= j <= nblock
-
- if block[i] != block[j],
-
- then the relative values of quadrant[i] and
- quadrant[j] are meaningless.
-
- else {
- if quadrant[i] < quadrant[j]
- then the string starting at i lexicographically
- precedes the string starting at j
-
- else if quadrant[i] > quadrant[j]
- then the string starting at j lexicographically
- precedes the string starting at i
-
- else
- the relative ordering of the strings starting
- at i and j has not yet been determined.
- }
- --*/
- bigDone[ss] = True;
-
- if (i < 255) {
- Int32 bbStart = ftab[ss << 8] & CLEARMASK;
- Int32 bbSize = (ftab[(ss+1) << 8] & CLEARMASK) - bbStart;
- Int32 shifts = 0;
-
- while ((bbSize >> shifts) > 65534) shifts++;
-
- for (j = bbSize-1; j >= 0; j--) {
- Int32 a2update = ptr[bbStart + j];
- UInt16 qVal = (UInt16)(j >> shifts);
- quadrant[a2update] = qVal;
- if (a2update < BZ_N_OVERSHOOT)
- quadrant[a2update + nblock] = qVal;
- }
- AssertH ( ((bbSize-1) >> shifts) <= 65535, 1002 );
- }
-
- }
-
- if (verb >= 4)
- VPrintf3 ( " %d pointers, %d sorted, %d scanned\n",
- nblock, numQSorted, nblock - numQSorted );
-}
-
-#undef BIGFREQ
-#undef SETMASK
-#undef CLEARMASK
-
-
-/*---------------------------------------------*/
-/* Pre:
- nblock > 0
- arr2 exists for [0 .. nblock-1 +N_OVERSHOOT]
- ((UChar*)arr2) [0 .. nblock-1] holds block
- arr1 exists for [0 .. nblock-1]
-
- Post:
- ((UChar*)arr2) [0 .. nblock-1] holds block
- All other areas of block destroyed
- ftab [ 0 .. 65536 ] destroyed
- arr1 [0 .. nblock-1] holds sorted order
-*/
-void BZ2_blockSort ( EState* s )
-{
- UInt32* ptr = s->ptr;
- UChar* block = s->block;
- UInt32* ftab = s->ftab;
- Int32 nblock = s->nblock;
- Int32 verb = s->verbosity;
- Int32 wfact = s->workFactor;
- UInt16* quadrant;
- Int32 budget;
- Int32 budgetInit;
- Int32 i;
-
- if (nblock < 10000) {
- fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
- } else {
- /* Calculate the location for quadrant, remembering to get
- the alignment right. Assumes that &(block[0]) is at least
- 2-byte aligned -- this should be ok since block is really
- the first section of arr2.
- */
- i = nblock+BZ_N_OVERSHOOT;
- if (i & 1) i++;
- quadrant = (UInt16*)(&(block[i]));
-
- /* (wfact-1) / 3 puts the default-factor-30
- transition point at very roughly the same place as
- with v0.1 and v0.9.0.
- Not that it particularly matters any more, since the
- resulting compressed stream is now the same regardless
- of whether or not we use the main sort or fallback sort.
- */
- if (wfact < 1 ) wfact = 1;
- if (wfact > 100) wfact = 100;
- budgetInit = nblock * ((wfact-1) / 3);
- budget = budgetInit;
-
- mainSort ( ptr, block, quadrant, ftab, nblock, verb, &budget );
- if (verb >= 3)
- VPrintf3 ( " %d work, %d block, ratio %5.2f\n",
- budgetInit - budget,
- nblock,
- (float)(budgetInit - budget) /
- (float)(nblock==0 ? 1 : nblock) );
- if (budget < 0) {
- if (verb >= 2)
- VPrintf0 ( " too repetitive; using fallback"
- " sorting algorithm\n" );
- fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
- }
- }
-
- s->origPtr = -1;
- for (i = 0; i < s->nblock; i++)
- if (ptr[i] == 0)
- { s->origPtr = i; break; };
-
- AssertH( s->origPtr != -1, 1003 );
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end blocksort.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib.c b/mdk-stage1/bzlib/bzlib.c
deleted file mode 100644
index b1fc85236..000000000
--- a/mdk-stage1/bzlib/bzlib.c
+++ /dev/null
@@ -1,1567 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Library top-level functions. ---*/
-/*--- bzlib.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2000 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-/*--
- CHANGES
- ~~~~~~~
- 0.9.0 -- original version.
-
- 0.9.0a/b -- no changes in this file.
-
- 0.9.0c
- * made zero-length BZ_FLUSH work correctly in bzCompress().
- * fixed bzWrite/bzRead to ignore zero-length requests.
- * fixed bzread to correctly handle read requests after EOF.
- * wrong parameter order in call to bzDecompressInit in
- bzBuffToBuffDecompress. Fixed.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-/*--- Compression stuff ---*/
-/*---------------------------------------------------*/
-
-
-/*---------------------------------------------------*/
-#ifndef BZ_NO_STDIO
-void BZ2_bz__AssertH__fail ( int errcode )
-{
- fprintf(stderr,
- "\n\nbzip2/libbzip2: internal error number %d.\n"
- "This is a bug in bzip2/libbzip2, %s.\n"
- "Please report it to me at: jseward@acm.org. If this happened\n"
- "when you were using some program which uses libbzip2 as a\n"
- "component, you should also report this bug to the author(s)\n"
- "of that program. Please make an effort to report this bug;\n"
- "timely and accurate bug reports eventually lead to higher\n"
- "quality software. Thanks. Julian Seward, 21 March 2000.\n\n",
- errcode,
- BZ2_bzlibVersion()
- );
- exit(3);
-}
-#endif
-
-
-/*---------------------------------------------------*/
-static
-int bz_config_ok ( void )
-{
- if (sizeof(int) != 4) return 0;
- if (sizeof(short) != 2) return 0;
- if (sizeof(char) != 1) return 0;
- return 1;
-}
-
-
-/*---------------------------------------------------*/
-static
-void* default_bzalloc ( void* opaque __attribute__ ((unused)), Int32 items, Int32 size )
-{
- void* v = malloc ( items * size );
- return v;
-}
-
-static
-void default_bzfree ( void* opaque __attribute__ ((unused)), void* addr )
-{
- if (addr != NULL) free ( addr );
-}
-
-
-/*---------------------------------------------------*/
-static
-void prepare_new_block ( EState* s )
-{
- Int32 i;
- s->nblock = 0;
- s->numZ = 0;
- s->state_out_pos = 0;
- BZ_INITIALISE_CRC ( s->blockCRC );
- for (i = 0; i < 256; i++) s->inUse[i] = False;
- s->blockNo++;
-}
-
-
-/*---------------------------------------------------*/
-static
-void init_RL ( EState* s )
-{
- s->state_in_ch = 256;
- s->state_in_len = 0;
-}
-
-
-static
-Bool isempty_RL ( EState* s )
-{
- if (s->state_in_ch < 256 && s->state_in_len > 0)
- return False; else
- return True;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressInit)
- ( bz_stream* strm,
- int blockSize100k,
- int verbosity,
- int workFactor )
-{
- Int32 n;
- EState* s;
-
- if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
- if (strm == NULL ||
- blockSize100k < 1 || blockSize100k > 9 ||
- workFactor < 0 || workFactor > 250)
- return BZ_PARAM_ERROR;
-
- if (workFactor == 0) workFactor = 30;
- if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
- if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
- s = BZALLOC( sizeof(EState) );
- if (s == NULL) return BZ_MEM_ERROR;
- s->strm = strm;
-
- s->arr1 = NULL;
- s->arr2 = NULL;
- s->ftab = NULL;
-
- n = 100000 * blockSize100k;
- s->arr1 = BZALLOC( n * sizeof(UInt32) );
- s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) );
- s->ftab = BZALLOC( 65537 * sizeof(UInt32) );
-
- if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) {
- if (s->arr1 != NULL) BZFREE(s->arr1);
- if (s->arr2 != NULL) BZFREE(s->arr2);
- if (s->ftab != NULL) BZFREE(s->ftab);
- if (s != NULL) BZFREE(s);
- return BZ_MEM_ERROR;
- }
-
- s->blockNo = 0;
- s->state = BZ_S_INPUT;
- s->mode = BZ_M_RUNNING;
- s->combinedCRC = 0;
- s->blockSize100k = blockSize100k;
- s->nblockMAX = 100000 * blockSize100k - 19;
- s->verbosity = verbosity;
- s->workFactor = workFactor;
-
- s->block = (UChar*)s->arr2;
- s->mtfv = (UInt16*)s->arr1;
- s->zbits = NULL;
- s->ptr = (UInt32*)s->arr1;
-
- strm->state = s;
- strm->total_in_lo32 = 0;
- strm->total_in_hi32 = 0;
- strm->total_out_lo32 = 0;
- strm->total_out_hi32 = 0;
- init_RL ( s );
- prepare_new_block ( s );
- return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void add_pair_to_block ( EState* s )
-{
- Int32 i;
- UChar ch = (UChar)(s->state_in_ch);
- for (i = 0; i < s->state_in_len; i++) {
- BZ_UPDATE_CRC( s->blockCRC, ch );
- }
- s->inUse[s->state_in_ch] = True;
- switch (s->state_in_len) {
- case 1:
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- break;
- case 2:
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- break;
- case 3:
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- break;
- default:
- s->inUse[s->state_in_len-4] = True;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = (UChar)ch; s->nblock++;
- s->block[s->nblock] = ((UChar)(s->state_in_len-4));
- s->nblock++;
- break;
- }
-}
-
-
-/*---------------------------------------------------*/
-static
-void flush_RL ( EState* s )
-{
- if (s->state_in_ch < 256) add_pair_to_block ( s );
- init_RL ( s );
-}
-
-
-/*---------------------------------------------------*/
-#define ADD_CHAR_TO_BLOCK(zs,zchh0) \
-{ \
- UInt32 zchh = (UInt32)(zchh0); \
- /*-- fast track the common case --*/ \
- if (zchh != zs->state_in_ch && \
- zs->state_in_len == 1) { \
- UChar ch = (UChar)(zs->state_in_ch); \
- BZ_UPDATE_CRC( zs->blockCRC, ch ); \
- zs->inUse[zs->state_in_ch] = True; \
- zs->block[zs->nblock] = (UChar)ch; \
- zs->nblock++; \
- zs->state_in_ch = zchh; \
- } \
- else \
- /*-- general, uncommon cases --*/ \
- if (zchh != zs->state_in_ch || \
- zs->state_in_len == 255) { \
- if (zs->state_in_ch < 256) \
- add_pair_to_block ( zs ); \
- zs->state_in_ch = zchh; \
- zs->state_in_len = 1; \
- } else { \
- zs->state_in_len++; \
- } \
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_input_until_stop ( EState* s )
-{
- Bool progress_in = False;
-
- if (s->mode == BZ_M_RUNNING) {
-
- /*-- fast track the common case --*/
- while (True) {
- /*-- block full? --*/
- if (s->nblock >= s->nblockMAX) break;
- /*-- no input? --*/
- if (s->strm->avail_in == 0) break;
- progress_in = True;
- ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) );
- s->strm->next_in++;
- s->strm->avail_in--;
- s->strm->total_in_lo32++;
- if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
- }
-
- } else {
-
- /*-- general, uncommon case --*/
- while (True) {
- /*-- block full? --*/
- if (s->nblock >= s->nblockMAX) break;
- /*-- no input? --*/
- if (s->strm->avail_in == 0) break;
- /*-- flush/finish end? --*/
- if (s->avail_in_expect == 0) break;
- progress_in = True;
- ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) );
- s->strm->next_in++;
- s->strm->avail_in--;
- s->strm->total_in_lo32++;
- if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
- s->avail_in_expect--;
- }
- }
- return progress_in;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_output_until_stop ( EState* s )
-{
- Bool progress_out = False;
-
- while (True) {
-
- /*-- no output space? --*/
- if (s->strm->avail_out == 0) break;
-
- /*-- block done? --*/
- if (s->state_out_pos >= s->numZ) break;
-
- progress_out = True;
- *(s->strm->next_out) = s->zbits[s->state_out_pos];
- s->state_out_pos++;
- s->strm->avail_out--;
- s->strm->next_out++;
- s->strm->total_out_lo32++;
- if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
- }
-
- return progress_out;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool handle_compress ( bz_stream* strm )
-{
- Bool progress_in = False;
- Bool progress_out = False;
- EState* s = strm->state;
-
- while (True) {
-
- if (s->state == BZ_S_OUTPUT) {
- progress_out |= copy_output_until_stop ( s );
- if (s->state_out_pos < s->numZ) break;
- if (s->mode == BZ_M_FINISHING &&
- s->avail_in_expect == 0 &&
- isempty_RL(s)) break;
- prepare_new_block ( s );
- s->state = BZ_S_INPUT;
- if (s->mode == BZ_M_FLUSHING &&
- s->avail_in_expect == 0 &&
- isempty_RL(s)) break;
- }
-
- if (s->state == BZ_S_INPUT) {
- progress_in |= copy_input_until_stop ( s );
- if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) {
- flush_RL ( s );
- BZ2_compressBlock ( s, (Bool)(s->mode == BZ_M_FINISHING) );
- s->state = BZ_S_OUTPUT;
- }
- else
- if (s->nblock >= s->nblockMAX) {
- BZ2_compressBlock ( s, False );
- s->state = BZ_S_OUTPUT;
- }
- else
- if (s->strm->avail_in == 0) {
- break;
- }
- }
-
- }
-
- return progress_in || progress_out;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompress) ( bz_stream *strm, int action )
-{
- Bool progress;
- EState* s;
- if (strm == NULL) return BZ_PARAM_ERROR;
- s = strm->state;
- if (s == NULL) return BZ_PARAM_ERROR;
- if (s->strm != strm) return BZ_PARAM_ERROR;
-
- preswitch:
- switch (s->mode) {
-
- case BZ_M_IDLE:
- return BZ_SEQUENCE_ERROR;
-
- case BZ_M_RUNNING:
- if (action == BZ_RUN) {
- progress = handle_compress ( strm );
- return progress ? BZ_RUN_OK : BZ_PARAM_ERROR;
- }
- else
- if (action == BZ_FLUSH) {
- s->avail_in_expect = strm->avail_in;
- s->mode = BZ_M_FLUSHING;
- goto preswitch;
- }
- else
- if (action == BZ_FINISH) {
- s->avail_in_expect = strm->avail_in;
- s->mode = BZ_M_FINISHING;
- goto preswitch;
- }
- else
- return BZ_PARAM_ERROR;
-
- case BZ_M_FLUSHING:
- if (action != BZ_FLUSH) return BZ_SEQUENCE_ERROR;
- if (s->avail_in_expect != s->strm->avail_in)
- return BZ_SEQUENCE_ERROR;
- progress = handle_compress ( strm );
- if (s->avail_in_expect > 0 || !isempty_RL(s) ||
- s->state_out_pos < s->numZ) return BZ_FLUSH_OK;
- s->mode = BZ_M_RUNNING;
- return BZ_RUN_OK;
-
- case BZ_M_FINISHING:
- if (action != BZ_FINISH) return BZ_SEQUENCE_ERROR;
- if (s->avail_in_expect != s->strm->avail_in)
- return BZ_SEQUENCE_ERROR;
- progress = handle_compress ( strm );
- if (!progress) return BZ_SEQUENCE_ERROR;
- if (s->avail_in_expect > 0 || !isempty_RL(s) ||
- s->state_out_pos < s->numZ) return BZ_FINISH_OK;
- s->mode = BZ_M_IDLE;
- return BZ_STREAM_END;
- }
- return BZ_OK; /*--not reached--*/
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressEnd) ( bz_stream *strm )
-{
- EState* s;
- if (strm == NULL) return BZ_PARAM_ERROR;
- s = strm->state;
- if (s == NULL) return BZ_PARAM_ERROR;
- if (s->strm != strm) return BZ_PARAM_ERROR;
-
- if (s->arr1 != NULL) BZFREE(s->arr1);
- if (s->arr2 != NULL) BZFREE(s->arr2);
- if (s->ftab != NULL) BZFREE(s->ftab);
- BZFREE(strm->state);
-
- strm->state = NULL;
-
- return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-/*--- Decompression stuff ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompressInit)
- ( bz_stream* strm,
- int verbosity,
- int small )
-{
- DState* s;
-
- if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
- if (strm == NULL) return BZ_PARAM_ERROR;
- if (small != 0 && small != 1) return BZ_PARAM_ERROR;
- if (verbosity < 0 || verbosity > 4) return BZ_PARAM_ERROR;
-
- if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
- if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
- s = BZALLOC( sizeof(DState) );
- if (s == NULL) return BZ_MEM_ERROR;
- s->strm = strm;
- strm->state = s;
- s->state = BZ_X_MAGIC_1;
- s->bsLive = 0;
- s->bsBuff = 0;
- s->calculatedCombinedCRC = 0;
- strm->total_in_lo32 = 0;
- strm->total_in_hi32 = 0;
- strm->total_out_lo32 = 0;
- strm->total_out_hi32 = 0;
- s->smallDecompress = (Bool)small;
- s->ll4 = NULL;
- s->ll16 = NULL;
- s->tt = NULL;
- s->currBlockNo = 0;
- s->verbosity = verbosity;
-
- return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_FAST ( DState* s )
-{
- UChar k1;
-
- if (s->blockRandomised) {
-
- while (True) {
- /* try to finish existing run */
- while (True) {
- if (s->strm->avail_out == 0) return;
- if (s->state_out_len == 0) break;
- *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
- BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
- s->state_out_len--;
- s->strm->next_out++;
- s->strm->avail_out--;
- s->strm->total_out_lo32++;
- if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
- }
-
- /* can a new run be started? */
- if (s->nblock_used == s->save_nblock+1) return;
-
-
- s->state_out_len = 1;
- s->state_out_ch = s->k0;
- BZ_GET_FAST(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 2;
- BZ_GET_FAST(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 3;
- BZ_GET_FAST(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- BZ_GET_FAST(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- s->state_out_len = ((Int32)k1) + 4;
- BZ_GET_FAST(s->k0); BZ_RAND_UPD_MASK;
- s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
- }
-
- } else {
-
- /* restore */
- UInt32 c_calculatedBlockCRC = s->calculatedBlockCRC;
- UChar c_state_out_ch = s->state_out_ch;
- Int32 c_state_out_len = s->state_out_len;
- Int32 c_nblock_used = s->nblock_used;
- Int32 c_k0 = s->k0;
- UInt32* c_tt = s->tt;
- UInt32 c_tPos = s->tPos;
- char* cs_next_out = s->strm->next_out;
- unsigned int cs_avail_out = s->strm->avail_out;
- /* end restore */
-
- UInt32 avail_out_INIT = cs_avail_out;
- Int32 s_save_nblockPP = s->save_nblock+1;
- unsigned int total_out_lo32_old;
-
- while (True) {
-
- /* try to finish existing run */
- if (c_state_out_len > 0) {
- while (True) {
- if (cs_avail_out == 0) goto return_notr;
- if (c_state_out_len == 1) break;
- *( (UChar*)(cs_next_out) ) = c_state_out_ch;
- BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
- c_state_out_len--;
- cs_next_out++;
- cs_avail_out--;
- }
- s_state_out_len_eq_one:
- {
- if (cs_avail_out == 0) {
- c_state_out_len = 1; goto return_notr;
- };
- *( (UChar*)(cs_next_out) ) = c_state_out_ch;
- BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
- cs_next_out++;
- cs_avail_out--;
- }
- }
- /* can a new run be started? */
- if (c_nblock_used == s_save_nblockPP) {
- c_state_out_len = 0; goto return_notr;
- };
- c_state_out_ch = c_k0;
- BZ_GET_FAST_C(k1); c_nblock_used++;
- if (k1 != c_k0) {
- c_k0 = k1; goto s_state_out_len_eq_one;
- };
- if (c_nblock_used == s_save_nblockPP)
- goto s_state_out_len_eq_one;
-
- c_state_out_len = 2;
- BZ_GET_FAST_C(k1); c_nblock_used++;
- if (c_nblock_used == s_save_nblockPP) continue;
- if (k1 != c_k0) { c_k0 = k1; continue; };
-
- c_state_out_len = 3;
- BZ_GET_FAST_C(k1); c_nblock_used++;
- if (c_nblock_used == s_save_nblockPP) continue;
- if (k1 != c_k0) { c_k0 = k1; continue; };
-
- BZ_GET_FAST_C(k1); c_nblock_used++;
- c_state_out_len = ((Int32)k1) + 4;
- BZ_GET_FAST_C(c_k0); c_nblock_used++;
- }
-
- return_notr:
- total_out_lo32_old = s->strm->total_out_lo32;
- s->strm->total_out_lo32 += (avail_out_INIT - cs_avail_out);
- if (s->strm->total_out_lo32 < total_out_lo32_old)
- s->strm->total_out_hi32++;
-
- /* save */
- s->calculatedBlockCRC = c_calculatedBlockCRC;
- s->state_out_ch = c_state_out_ch;
- s->state_out_len = c_state_out_len;
- s->nblock_used = c_nblock_used;
- s->k0 = c_k0;
- s->tt = c_tt;
- s->tPos = c_tPos;
- s->strm->next_out = cs_next_out;
- s->strm->avail_out = cs_avail_out;
- /* end save */
- }
-}
-
-
-
-/*---------------------------------------------------*/
-__inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab )
-{
- Int32 nb, na, mid;
- nb = 0;
- na = 256;
- do {
- mid = (nb + na) >> 1;
- if (indx >= cftab[mid]) nb = mid; else na = mid;
- }
- while (na - nb != 1);
- return nb;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_SMALL ( DState* s )
-{
- UChar k1;
-
- if (s->blockRandomised) {
-
- while (True) {
- /* try to finish existing run */
- while (True) {
- if (s->strm->avail_out == 0) return;
- if (s->state_out_len == 0) break;
- *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
- BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
- s->state_out_len--;
- s->strm->next_out++;
- s->strm->avail_out--;
- s->strm->total_out_lo32++;
- if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
- }
-
- /* can a new run be started? */
- if (s->nblock_used == s->save_nblock+1) return;
-
-
- s->state_out_len = 1;
- s->state_out_ch = s->k0;
- BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 2;
- BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 3;
- BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK;
- k1 ^= BZ_RAND_MASK; s->nblock_used++;
- s->state_out_len = ((Int32)k1) + 4;
- BZ_GET_SMALL(s->k0); BZ_RAND_UPD_MASK;
- s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
- }
-
- } else {
-
- while (True) {
- /* try to finish existing run */
- while (True) {
- if (s->strm->avail_out == 0) return;
- if (s->state_out_len == 0) break;
- *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
- BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
- s->state_out_len--;
- s->strm->next_out++;
- s->strm->avail_out--;
- s->strm->total_out_lo32++;
- if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
- }
-
- /* can a new run be started? */
- if (s->nblock_used == s->save_nblock+1) return;
-
- s->state_out_len = 1;
- s->state_out_ch = s->k0;
- BZ_GET_SMALL(k1); s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 2;
- BZ_GET_SMALL(k1); s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- s->state_out_len = 3;
- BZ_GET_SMALL(k1); s->nblock_used++;
- if (s->nblock_used == s->save_nblock+1) continue;
- if (k1 != s->k0) { s->k0 = k1; continue; };
-
- BZ_GET_SMALL(k1); s->nblock_used++;
- s->state_out_len = ((Int32)k1) + 4;
- BZ_GET_SMALL(s->k0); s->nblock_used++;
- }
-
- }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
-{
- DState* s;
- if (strm == NULL) return BZ_PARAM_ERROR;
- s = strm->state;
- if (s == NULL) return BZ_PARAM_ERROR;
- if (s->strm != strm) return BZ_PARAM_ERROR;
-
- while (True) {
- if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR;
- if (s->state == BZ_X_OUTPUT) {
- if (s->smallDecompress)
- unRLE_obuf_to_output_SMALL ( s ); else
- unRLE_obuf_to_output_FAST ( s );
- if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) {
- BZ_FINALISE_CRC ( s->calculatedBlockCRC );
- if (s->verbosity >= 3)
- VPrintf2 ( " {0x%x, 0x%x}", s->storedBlockCRC,
- s->calculatedBlockCRC );
- if (s->verbosity >= 2) VPrintf0 ( "]" );
- if (s->calculatedBlockCRC != s->storedBlockCRC)
- return BZ_DATA_ERROR;
- s->calculatedCombinedCRC
- = (s->calculatedCombinedCRC << 1) |
- (s->calculatedCombinedCRC >> 31);
- s->calculatedCombinedCRC ^= s->calculatedBlockCRC;
- s->state = BZ_X_BLKHDR_1;
- } else {
- return BZ_OK;
- }
- }
- if (s->state >= BZ_X_MAGIC_1) {
- Int32 r = BZ2_decompress ( s );
- if (r == BZ_STREAM_END) {
- if (s->verbosity >= 3)
- VPrintf2 ( "\n combined CRCs: stored = 0x%x, computed = 0x%x",
- s->storedCombinedCRC, s->calculatedCombinedCRC );
- if (s->calculatedCombinedCRC != s->storedCombinedCRC)
- return BZ_DATA_ERROR;
- return r;
- }
- if (s->state != BZ_X_OUTPUT) return r;
- }
- }
-
- AssertH ( 0, 6001 );
-
- return 0; /*NOTREACHED*/
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompressEnd) ( bz_stream *strm )
-{
- DState* s;
- if (strm == NULL) return BZ_PARAM_ERROR;
- s = strm->state;
- if (s == NULL) return BZ_PARAM_ERROR;
- if (s->strm != strm) return BZ_PARAM_ERROR;
-
- if (s->tt != NULL) BZFREE(s->tt);
- if (s->ll16 != NULL) BZFREE(s->ll16);
- if (s->ll4 != NULL) BZFREE(s->ll4);
-
- BZFREE(strm->state);
- strm->state = NULL;
-
- return BZ_OK;
-}
-
-
-#ifndef BZ_NO_STDIO
-/*---------------------------------------------------*/
-/*--- File I/O stuff ---*/
-/*---------------------------------------------------*/
-
-#define BZ_SETERR(eee) \
-{ \
- if (bzerror != NULL) *bzerror = eee; \
- if (bzf != NULL) bzf->lastErr = eee; \
-}
-
-typedef
- struct {
- FILE* handle;
- Char buf[BZ_MAX_UNUSED];
- Int32 bufN;
- Bool writing;
- bz_stream strm;
- Int32 lastErr;
- Bool initialisedOk;
- }
- bzFile;
-
-
-/*---------------------------------------------*/
-static Bool myfeof ( FILE* f )
-{
- return feof(f) ? True : False;
-}
-
-
-/*---------------------------------------------------*/
-BZFILE* BZ_API(BZ2_bzWriteOpen)
- ( int* bzerror,
- FILE* f,
- int blockSize100k,
- int verbosity,
- int workFactor )
-{
- Int32 ret;
- bzFile* bzf = NULL;
-
- BZ_SETERR(BZ_OK);
-
- if (f == NULL ||
- (blockSize100k < 1 || blockSize100k > 9) ||
- (workFactor < 0 || workFactor > 250) ||
- (verbosity < 0 || verbosity > 4))
- { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
-
- if (ferror(f))
- { BZ_SETERR(BZ_IO_ERROR); return NULL; };
-
- bzf = malloc ( sizeof(bzFile) );
- if (bzf == NULL)
- { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
-
- BZ_SETERR(BZ_OK);
- bzf->initialisedOk = False;
- bzf->bufN = 0;
- bzf->handle = f;
- bzf->writing = True;
- bzf->strm.bzalloc = NULL;
- bzf->strm.bzfree = NULL;
- bzf->strm.opaque = NULL;
-
- if (workFactor == 0) workFactor = 30;
- ret = BZ2_bzCompressInit ( &(bzf->strm), blockSize100k,
- verbosity, workFactor );
- if (ret != BZ_OK)
- { BZ_SETERR(ret); free(bzf); return NULL; };
-
- bzf->strm.avail_in = 0;
- bzf->initialisedOk = True;
- return bzf;
-}
-
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzWrite)
- ( int* bzerror,
- BZFILE* b,
- void* buf,
- int len )
-{
- Int32 n, n2, ret;
- bzFile* bzf = (bzFile*)b;
-
- BZ_SETERR(BZ_OK);
- if (bzf == NULL || buf == NULL || len < 0)
- { BZ_SETERR(BZ_PARAM_ERROR); return; };
- if (!(bzf->writing))
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
-
- if (len == 0)
- { BZ_SETERR(BZ_OK); return; };
-
- bzf->strm.avail_in = len;
- bzf->strm.next_in = buf;
-
- while (True) {
- bzf->strm.avail_out = BZ_MAX_UNUSED;
- bzf->strm.next_out = bzf->buf;
- ret = BZ2_bzCompress ( &(bzf->strm), BZ_RUN );
- if (ret != BZ_RUN_OK)
- { BZ_SETERR(ret); return; };
-
- if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
- n = BZ_MAX_UNUSED - bzf->strm.avail_out;
- n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar),
- n, bzf->handle );
- if (n != n2 || ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
- }
-
- if (bzf->strm.avail_in == 0)
- { BZ_SETERR(BZ_OK); return; };
- }
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzWriteClose)
- ( int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in,
- unsigned int* nbytes_out )
-{
- BZ2_bzWriteClose64 ( bzerror, b, abandon,
- nbytes_in, NULL, nbytes_out, NULL );
-}
-
-
-void BZ_API(BZ2_bzWriteClose64)
- ( int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in_lo32,
- unsigned int* nbytes_in_hi32,
- unsigned int* nbytes_out_lo32,
- unsigned int* nbytes_out_hi32 )
-{
- Int32 n, n2, ret;
- bzFile* bzf = (bzFile*)b;
-
- if (bzf == NULL)
- { BZ_SETERR(BZ_OK); return; };
- if (!(bzf->writing))
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
-
- if (nbytes_in_lo32 != NULL) *nbytes_in_lo32 = 0;
- if (nbytes_in_hi32 != NULL) *nbytes_in_hi32 = 0;
- if (nbytes_out_lo32 != NULL) *nbytes_out_lo32 = 0;
- if (nbytes_out_hi32 != NULL) *nbytes_out_hi32 = 0;
-
- if ((!abandon) && bzf->lastErr == BZ_OK) {
- while (True) {
- bzf->strm.avail_out = BZ_MAX_UNUSED;
- bzf->strm.next_out = bzf->buf;
- ret = BZ2_bzCompress ( &(bzf->strm), BZ_FINISH );
- if (ret != BZ_FINISH_OK && ret != BZ_STREAM_END)
- { BZ_SETERR(ret); return; };
-
- if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
- n = BZ_MAX_UNUSED - bzf->strm.avail_out;
- n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar),
- n, bzf->handle );
- if (n != n2 || ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
- }
-
- if (ret == BZ_STREAM_END) break;
- }
- }
-
- if ( !abandon && !ferror ( bzf->handle ) ) {
- fflush ( bzf->handle );
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return; };
- }
-
- if (nbytes_in_lo32 != NULL)
- *nbytes_in_lo32 = bzf->strm.total_in_lo32;
- if (nbytes_in_hi32 != NULL)
- *nbytes_in_hi32 = bzf->strm.total_in_hi32;
- if (nbytes_out_lo32 != NULL)
- *nbytes_out_lo32 = bzf->strm.total_out_lo32;
- if (nbytes_out_hi32 != NULL)
- *nbytes_out_hi32 = bzf->strm.total_out_hi32;
-
- BZ_SETERR(BZ_OK);
- BZ2_bzCompressEnd ( &(bzf->strm) );
- free ( bzf );
-}
-
-
-/*---------------------------------------------------*/
-BZFILE* BZ_API(BZ2_bzReadOpen)
- ( int* bzerror,
- FILE* f,
- int verbosity,
- int small,
- void* unused,
- int nUnused )
-{
- bzFile* bzf = NULL;
- int ret;
-
- BZ_SETERR(BZ_OK);
-
- if (f == NULL ||
- (small != 0 && small != 1) ||
- (verbosity < 0 || verbosity > 4) ||
- (unused == NULL && nUnused != 0) ||
- (unused != NULL && (nUnused < 0 || nUnused > BZ_MAX_UNUSED)))
- { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
-
- if (ferror(f))
- { BZ_SETERR(BZ_IO_ERROR); return NULL; };
-
- bzf = malloc ( sizeof(bzFile) );
- if (bzf == NULL)
- { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
-
- BZ_SETERR(BZ_OK);
-
- bzf->initialisedOk = False;
- bzf->handle = f;
- bzf->bufN = 0;
- bzf->writing = False;
- bzf->strm.bzalloc = NULL;
- bzf->strm.bzfree = NULL;
- bzf->strm.opaque = NULL;
-
- while (nUnused > 0) {
- bzf->buf[bzf->bufN] = *((UChar*)(unused)); bzf->bufN++;
- unused = ((void*)( 1 + ((UChar*)(unused)) ));
- nUnused--;
- }
-
- ret = BZ2_bzDecompressInit ( &(bzf->strm), verbosity, small );
- if (ret != BZ_OK)
- { BZ_SETERR(ret); free(bzf); return NULL; };
-
- bzf->strm.avail_in = bzf->bufN;
- bzf->strm.next_in = bzf->buf;
-
- bzf->initialisedOk = True;
- return bzf;
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzReadClose) ( int *bzerror, BZFILE *b )
-{
- bzFile* bzf = (bzFile*)b;
-
- BZ_SETERR(BZ_OK);
- if (bzf == NULL)
- { BZ_SETERR(BZ_OK); return; };
-
- if (bzf->writing)
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-
- if (bzf->initialisedOk)
- (void)BZ2_bzDecompressEnd ( &(bzf->strm) );
- free ( bzf );
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzRead)
- ( int* bzerror,
- BZFILE* b,
- void* buf,
- int len )
-{
- Int32 n, ret;
- bzFile* bzf = (bzFile*)b;
-
- BZ_SETERR(BZ_OK);
-
- if (bzf == NULL || buf == NULL || len < 0)
- { BZ_SETERR(BZ_PARAM_ERROR); return 0; };
-
- if (bzf->writing)
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return 0; };
-
- if (len == 0)
- { BZ_SETERR(BZ_OK); return 0; };
-
- bzf->strm.avail_out = len;
- bzf->strm.next_out = buf;
-
- while (True) {
-
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return 0; };
-
- if (bzf->strm.avail_in == 0 && !myfeof(bzf->handle)) {
- n = fread ( bzf->buf, sizeof(UChar),
- BZ_MAX_UNUSED, bzf->handle );
- if (ferror(bzf->handle))
- { BZ_SETERR(BZ_IO_ERROR); return 0; };
- bzf->bufN = n;
- bzf->strm.avail_in = bzf->bufN;
- bzf->strm.next_in = bzf->buf;
- }
-
- ret = BZ2_bzDecompress ( &(bzf->strm) );
-
- if (ret != BZ_OK && ret != BZ_STREAM_END)
- { BZ_SETERR(ret); return 0; };
-
- if (ret == BZ_OK && myfeof(bzf->handle) &&
- bzf->strm.avail_in == 0 && bzf->strm.avail_out > 0)
- { BZ_SETERR(BZ_UNEXPECTED_EOF); return 0; };
-
- if (ret == BZ_STREAM_END)
- { BZ_SETERR(BZ_STREAM_END);
- return len - bzf->strm.avail_out; };
- if (bzf->strm.avail_out == 0)
- { BZ_SETERR(BZ_OK); return len; };
-
- }
-
- return 0; /*not reached*/
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzReadGetUnused)
- ( int* bzerror,
- BZFILE* b,
- void** unused,
- int* nUnused )
-{
- bzFile* bzf = (bzFile*)b;
- if (bzf == NULL)
- { BZ_SETERR(BZ_PARAM_ERROR); return; };
- if (bzf->lastErr != BZ_STREAM_END)
- { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
- if (unused == NULL || nUnused == NULL)
- { BZ_SETERR(BZ_PARAM_ERROR); return; };
-
- BZ_SETERR(BZ_OK);
- *nUnused = bzf->strm.avail_in;
- *unused = bzf->strm.next_in;
-}
-#endif
-
-
-/*---------------------------------------------------*/
-/*--- Misc convenience stuff ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzBuffToBuffCompress)
- ( char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int blockSize100k,
- int verbosity,
- int workFactor )
-{
- bz_stream strm;
- int ret;
-
- if (dest == NULL || destLen == NULL ||
- source == NULL ||
- blockSize100k < 1 || blockSize100k > 9 ||
- verbosity < 0 || verbosity > 4 ||
- workFactor < 0 || workFactor > 250)
- return BZ_PARAM_ERROR;
-
- if (workFactor == 0) workFactor = 30;
- strm.bzalloc = NULL;
- strm.bzfree = NULL;
- strm.opaque = NULL;
- ret = BZ2_bzCompressInit ( &strm, blockSize100k,
- verbosity, workFactor );
- if (ret != BZ_OK) return ret;
-
- strm.next_in = source;
- strm.next_out = dest;
- strm.avail_in = sourceLen;
- strm.avail_out = *destLen;
-
- ret = BZ2_bzCompress ( &strm, BZ_FINISH );
- if (ret == BZ_FINISH_OK) goto output_overflow;
- if (ret != BZ_STREAM_END) goto errhandler;
-
- /* normal termination */
- *destLen -= strm.avail_out;
- BZ2_bzCompressEnd ( &strm );
- return BZ_OK;
-
- output_overflow:
- BZ2_bzCompressEnd ( &strm );
- return BZ_OUTBUFF_FULL;
-
- errhandler:
- BZ2_bzCompressEnd ( &strm );
- return ret;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzBuffToBuffDecompress)
- ( char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int small,
- int verbosity )
-{
- bz_stream strm;
- int ret;
-
- if (dest == NULL || destLen == NULL ||
- source == NULL ||
- (small != 0 && small != 1) ||
- verbosity < 0 || verbosity > 4)
- return BZ_PARAM_ERROR;
-
- strm.bzalloc = NULL;
- strm.bzfree = NULL;
- strm.opaque = NULL;
- ret = BZ2_bzDecompressInit ( &strm, verbosity, small );
- if (ret != BZ_OK) return ret;
-
- strm.next_in = source;
- strm.next_out = dest;
- strm.avail_in = sourceLen;
- strm.avail_out = *destLen;
-
- ret = BZ2_bzDecompress ( &strm );
- if (ret == BZ_OK) goto output_overflow_or_eof;
- if (ret != BZ_STREAM_END) goto errhandler;
-
- /* normal termination */
- *destLen -= strm.avail_out;
- BZ2_bzDecompressEnd ( &strm );
- return BZ_OK;
-
- output_overflow_or_eof:
- if (strm.avail_out > 0) {
- BZ2_bzDecompressEnd ( &strm );
- return BZ_UNEXPECTED_EOF;
- } else {
- BZ2_bzDecompressEnd ( &strm );
- return BZ_OUTBUFF_FULL;
- };
-
- errhandler:
- BZ2_bzDecompressEnd ( &strm );
- return ret;
-}
-
-
-/*---------------------------------------------------*/
-/*--
- Code contributed by Yoshioka Tsuneo
- (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
- to support better zlib compatibility.
- This code is not _officially_ part of libbzip2 (yet);
- I haven't tested it, documented it, or considered the
- threading-safeness of it.
- If this code breaks, please contact both Yoshioka and me.
---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-/*--
- return version like "0.9.0c".
---*/
-const char * BZ_API(BZ2_bzlibVersion)(void)
-{
- return BZ_VERSION;
-}
-
-
-#ifndef BZ_NO_STDIO
-/*---------------------------------------------------*/
-
-#if defined(_WIN32) || defined(OS2) || defined(MSDOS)
-# include <fcntl.h>
-# include <io.h>
-# define SET_BINARY_MODE(file) setmode(fileno(file),O_BINARY)
-#else
-# define SET_BINARY_MODE(file)
-#endif
-static
-BZFILE * bzopen_or_bzdopen
- ( const char *path, /* no use when bzdopen */
- int fd, /* no use when bzdopen */
- const char *mode,
- int open_mode) /* bzopen: 0, bzdopen:1 */
-{
- int bzerr;
- char unused[BZ_MAX_UNUSED];
- int blockSize100k = 9;
- int writing = 0;
- char mode2[10] = "";
- FILE *fp = NULL;
- BZFILE *bzfp = NULL;
- int verbosity = 0;
- int workFactor = 30;
- int smallMode = 0;
- int nUnused = 0;
-
- if (mode == NULL) return NULL;
- while (*mode) {
- switch (*mode) {
- case 'r':
- writing = 0; break;
- case 'w':
- writing = 1; break;
- case 's':
- smallMode = 1; break;
- default:
- if (isdigit((int)(*mode))) {
- blockSize100k = *mode-'0';
- }
- }
- mode++;
- }
- strcat(mode2, writing ? "w" : "r" );
- strcat(mode2,"b"); /* binary mode */
-
- if (open_mode==0) {
- if (path==NULL || strcmp(path,"")==0) {
- fp = (writing ? stdout : stdin);
- SET_BINARY_MODE(fp);
- } else {
- fp = fopen(path,mode2);
- }
- } else {
-#ifdef BZ_STRICT_ANSI
- fp = NULL;
-#else
- fp = fdopen(fd,mode2);
-#endif
- }
- if (fp == NULL) return NULL;
-
- if (writing) {
- /* Guard against total chaos and anarchy -- JRS */
- if (blockSize100k < 1) blockSize100k = 1;
- if (blockSize100k > 9) blockSize100k = 9;
- bzfp = BZ2_bzWriteOpen(&bzerr,fp,blockSize100k,
- verbosity,workFactor);
- } else {
- bzfp = BZ2_bzReadOpen(&bzerr,fp,verbosity,smallMode,
- unused,nUnused);
- }
- if (bzfp == NULL) {
- if (fp != stdin && fp != stdout) fclose(fp);
- return NULL;
- }
- return bzfp;
-}
-
-
-/*---------------------------------------------------*/
-/*--
- open file for read or write.
- ex) bzopen("file","w9")
- case path="" or NULL => use stdin or stdout.
---*/
-BZFILE * BZ_API(BZ2_bzopen)
- ( const char *path,
- const char *mode )
-{
- return bzopen_or_bzdopen(path,-1,mode,/*bzopen*/0);
-}
-
-
-/*---------------------------------------------------*/
-BZFILE * BZ_API(BZ2_bzdopen)
- ( int fd,
- const char *mode )
-{
- return bzopen_or_bzdopen(NULL,fd,mode,/*bzdopen*/1);
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzread) (BZFILE* b, void* buf, int len )
-{
- int bzerr, nread;
- if (((bzFile*)b)->lastErr == BZ_STREAM_END) return 0;
- nread = BZ2_bzRead(&bzerr,b,buf,len);
- if (bzerr == BZ_OK || bzerr == BZ_STREAM_END) {
- return nread;
- } else {
- return -1;
- }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzwrite) (BZFILE* b, void* buf, int len )
-{
- int bzerr;
-
- BZ2_bzWrite(&bzerr,b,buf,len);
- if(bzerr == BZ_OK){
- return len;
- }else{
- return -1;
- }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzflush) (BZFILE *b __attribute__ ((unused)))
-{
- /* do nothing now... */
- return 0;
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzclose) (BZFILE* b)
-{
- int bzerr;
- FILE *fp = ((bzFile *)b)->handle;
-
- if (b==NULL) {return;}
- if(((bzFile*)b)->writing){
- BZ2_bzWriteClose(&bzerr,b,0,NULL,NULL);
- if(bzerr != BZ_OK){
- BZ2_bzWriteClose(NULL,b,1,NULL,NULL);
- }
- }else{
- BZ2_bzReadClose(&bzerr,b);
- }
- if(fp!=stdin && fp!=stdout){
- fclose(fp);
- }
-}
-
-
-/*---------------------------------------------------*/
-/*--
- return last error code
---*/
-static char *bzerrorstrings[] = {
- "OK"
- ,"SEQUENCE_ERROR"
- ,"PARAM_ERROR"
- ,"MEM_ERROR"
- ,"DATA_ERROR"
- ,"DATA_ERROR_MAGIC"
- ,"IO_ERROR"
- ,"UNEXPECTED_EOF"
- ,"OUTBUFF_FULL"
- ,"CONFIG_ERROR"
- ,"???" /* for future */
- ,"???" /* for future */
- ,"???" /* for future */
- ,"???" /* for future */
- ,"???" /* for future */
- ,"???" /* for future */
-};
-
-
-const char * BZ_API(BZ2_bzerror) (BZFILE *b, int *errnum)
-{
- int err = ((bzFile *)b)->lastErr;
-
- if(err>0) err = 0;
- *errnum = err;
- return bzerrorstrings[err*-1];
-}
-#endif
-
-
-/*-------------------------------------------------------------*/
-/*--- end bzlib.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib.h b/mdk-stage1/bzlib/bzlib.h
deleted file mode 100644
index c9447a295..000000000
--- a/mdk-stage1/bzlib/bzlib.h
+++ /dev/null
@@ -1,319 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Public header file for the library. ---*/
-/*--- bzlib.h ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2000 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-
-#ifndef _BZLIB_H
-#define _BZLIB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define BZ_RUN 0
-#define BZ_FLUSH 1
-#define BZ_FINISH 2
-
-#define BZ_OK 0
-#define BZ_RUN_OK 1
-#define BZ_FLUSH_OK 2
-#define BZ_FINISH_OK 3
-#define BZ_STREAM_END 4
-#define BZ_SEQUENCE_ERROR (-1)
-#define BZ_PARAM_ERROR (-2)
-#define BZ_MEM_ERROR (-3)
-#define BZ_DATA_ERROR (-4)
-#define BZ_DATA_ERROR_MAGIC (-5)
-#define BZ_IO_ERROR (-6)
-#define BZ_UNEXPECTED_EOF (-7)
-#define BZ_OUTBUFF_FULL (-8)
-#define BZ_CONFIG_ERROR (-9)
-
-typedef
- struct {
- char *next_in;
- unsigned int avail_in;
- unsigned int total_in_lo32;
- unsigned int total_in_hi32;
-
- char *next_out;
- unsigned int avail_out;
- unsigned int total_out_lo32;
- unsigned int total_out_hi32;
-
- void *state;
-
- void *(*bzalloc)(void *,int,int);
- void (*bzfree)(void *,void *);
- void *opaque;
- }
- bz_stream;
-
-
-#ifndef BZ_IMPORT
-#define BZ_EXPORT
-#endif
-
-#ifdef _WIN32
-# include <stdio.h>
-# include <windows.h>
-# ifdef small
- /* windows.h define small to char */
-# undef small
-# endif
-# ifdef BZ_EXPORT
-# define BZ_API(func) WINAPI func
-# define BZ_EXTERN extern
-# else
- /* import windows dll dynamically */
-# define BZ_API(func) (WINAPI * func)
-# define BZ_EXTERN
-# endif
-#else
-# define BZ_API(func) func
-# define BZ_EXTERN extern
-#endif
-
-
-/*-- Core (low-level) library functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressInit) (
- bz_stream* strm,
- int blockSize100k,
- int verbosity,
- int workFactor
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompress) (
- bz_stream* strm,
- int action
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) (
- bz_stream* strm
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) (
- bz_stream *strm,
- int verbosity,
- int small
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompress) (
- bz_stream* strm
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) (
- bz_stream *strm
- );
-
-
-
-/*-- High(er) level library functions --*/
-
-#ifndef BZ_NO_STDIO
-#define BZ_MAX_UNUSED 5000
-
-typedef void BZFILE;
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) (
- int* bzerror,
- FILE* f,
- int verbosity,
- int small,
- void* unused,
- int nUnused
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadClose) (
- int* bzerror,
- BZFILE* b
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) (
- int* bzerror,
- BZFILE* b,
- void** unused,
- int* nUnused
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzRead) (
- int* bzerror,
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) (
- int* bzerror,
- FILE* f,
- int blockSize100k,
- int verbosity,
- int workFactor
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzWrite) (
- int* bzerror,
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose) (
- int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in,
- unsigned int* nbytes_out
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) (
- int* bzerror,
- BZFILE* b,
- int abandon,
- unsigned int* nbytes_in_lo32,
- unsigned int* nbytes_in_hi32,
- unsigned int* nbytes_out_lo32,
- unsigned int* nbytes_out_hi32
- );
-#endif
-
-
-/*-- Utility functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) (
- char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int blockSize100k,
- int verbosity,
- int workFactor
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) (
- char* dest,
- unsigned int* destLen,
- char* source,
- unsigned int sourceLen,
- int small,
- int verbosity
- );
-
-
-/*--
- Code contributed by Yoshioka Tsuneo
- (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
- to support better zlib compatibility.
- This code is not _officially_ part of libbzip2 (yet);
- I haven't tested it, documented it, or considered the
- threading-safeness of it.
- If this code breaks, please contact both Yoshioka and me.
---*/
-
-BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) (
- void
- );
-
-#ifndef BZ_NO_STDIO
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) (
- const char *path,
- const char *mode
- );
-
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) (
- int fd,
- const char *mode
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzread) (
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzwrite) (
- BZFILE* b,
- void* buf,
- int len
- );
-
-BZ_EXTERN int BZ_API(BZ2_bzflush) (
- BZFILE* b
- );
-
-BZ_EXTERN void BZ_API(BZ2_bzclose) (
- BZFILE* b
- );
-
-BZ_EXTERN const char * BZ_API(BZ2_bzerror) (
- BZFILE *b,
- int *errnum
- );
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/*-------------------------------------------------------------*/
-/*--- end bzlib.h ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib_private.h b/mdk-stage1/bzlib/bzlib_private.h
deleted file mode 100644
index fb51c7a1d..000000000
--- a/mdk-stage1/bzlib/bzlib_private.h
+++ /dev/null
@@ -1,530 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Private header file for the library. ---*/
-/*--- bzlib_private.h ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2000 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-
-#ifndef _BZLIB_PRIVATE_H
-#define _BZLIB_PRIVATE_H
-
-#include <stdlib.h>
-
-#ifndef BZ_NO_STDIO
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-#endif
-
-#include "bzlib.h"
-
-
-
-/*-- General stuff. --*/
-
-#define BZ_VERSION "1.0.1, 23-June-2000"
-
-typedef char Char;
-typedef unsigned char Bool;
-typedef unsigned char UChar;
-typedef int Int32;
-typedef unsigned int UInt32;
-typedef short Int16;
-typedef unsigned short UInt16;
-
-#define True ((Bool)1)
-#define False ((Bool)0)
-
-#ifndef __GNUC__
-#define __inline__ /* */
-#endif
-
-#ifndef BZ_NO_STDIO
-extern void BZ2_bz__AssertH__fail ( int errcode );
-#define AssertH(cond,errcode) \
- { if (!(cond)) BZ2_bz__AssertH__fail ( errcode ); }
-#if BZ_DEBUG
-#define AssertD(cond,msg) \
- { if (!(cond)) { \
- fprintf ( stderr, \
- "\n\nlibbzip2(debug build): internal error\n\t%s\n", msg );\
- exit(1); \
- }}
-#else
-#define AssertD(cond,msg) /* */
-#endif
-#define VPrintf0(zf) \
- fprintf(stderr,zf)
-#define VPrintf1(zf,za1) \
- fprintf(stderr,zf,za1)
-#define VPrintf2(zf,za1,za2) \
- fprintf(stderr,zf,za1,za2)
-#define VPrintf3(zf,za1,za2,za3) \
- fprintf(stderr,zf,za1,za2,za3)
-#define VPrintf4(zf,za1,za2,za3,za4) \
- fprintf(stderr,zf,za1,za2,za3,za4)
-#define VPrintf5(zf,za1,za2,za3,za4,za5) \
- fprintf(stderr,zf,za1,za2,za3,za4,za5)
-#else
-extern void bz_internal_error ( int errcode );
-#define AssertH(cond,errcode) \
- { if (!(cond)) bz_internal_error ( errcode ); }
-#define AssertD(cond,msg) /* */
-#define VPrintf0(zf) /* */
-#define VPrintf1(zf,za1) /* */
-#define VPrintf2(zf,za1,za2) /* */
-#define VPrintf3(zf,za1,za2,za3) /* */
-#define VPrintf4(zf,za1,za2,za3,za4) /* */
-#define VPrintf5(zf,za1,za2,za3,za4,za5) /* */
-#endif
-
-
-#define BZALLOC(nnn) (strm->bzalloc)(strm->opaque,(nnn),1)
-#define BZFREE(ppp) (strm->bzfree)(strm->opaque,(ppp))
-
-
-/*-- Constants for the back end. --*/
-
-#define BZ_MAX_ALPHA_SIZE 258
-#define BZ_MAX_CODE_LEN 23
-
-#define BZ_RUNA 0
-#define BZ_RUNB 1
-
-#define BZ_N_GROUPS 6
-#define BZ_G_SIZE 50
-#define BZ_N_ITERS 4
-
-#define BZ_MAX_SELECTORS (2 + (900000 / BZ_G_SIZE))
-
-
-
-/*-- Stuff for randomising repetitive blocks. --*/
-
-extern Int32 BZ2_rNums[512];
-
-#define BZ_RAND_DECLS \
- Int32 rNToGo; \
- Int32 rTPos \
-
-#define BZ_RAND_INIT_MASK \
- s->rNToGo = 0; \
- s->rTPos = 0 \
-
-#define BZ_RAND_MASK ((s->rNToGo == 1) ? 1 : 0)
-
-#define BZ_RAND_UPD_MASK \
- if (s->rNToGo == 0) { \
- s->rNToGo = BZ2_rNums[s->rTPos]; \
- s->rTPos++; \
- if (s->rTPos == 512) s->rTPos = 0; \
- } \
- s->rNToGo--;
-
-
-
-/*-- Stuff for doing CRCs. --*/
-
-extern UInt32 BZ2_crc32Table[256];
-
-#define BZ_INITIALISE_CRC(crcVar) \
-{ \
- crcVar = 0xffffffffL; \
-}
-
-#define BZ_FINALISE_CRC(crcVar) \
-{ \
- crcVar = ~(crcVar); \
-}
-
-#define BZ_UPDATE_CRC(crcVar,cha) \
-{ \
- crcVar = (crcVar << 8) ^ \
- BZ2_crc32Table[(crcVar >> 24) ^ \
- ((UChar)cha)]; \
-}
-
-
-
-/*-- States and modes for compression. --*/
-
-#define BZ_M_IDLE 1
-#define BZ_M_RUNNING 2
-#define BZ_M_FLUSHING 3
-#define BZ_M_FINISHING 4
-
-#define BZ_S_OUTPUT 1
-#define BZ_S_INPUT 2
-
-#define BZ_N_RADIX 2
-#define BZ_N_QSORT 12
-#define BZ_N_SHELL 18
-#define BZ_N_OVERSHOOT (BZ_N_RADIX + BZ_N_QSORT + BZ_N_SHELL + 2)
-
-
-
-
-/*-- Structure holding all the compression-side stuff. --*/
-
-typedef
- struct {
- /* pointer back to the struct bz_stream */
- bz_stream* strm;
-
- /* mode this stream is in, and whether inputting */
- /* or outputting data */
- Int32 mode;
- Int32 state;
-
- /* remembers avail_in when flush/finish requested */
- UInt32 avail_in_expect;
-
- /* for doing the block sorting */
- UInt32* arr1;
- UInt32* arr2;
- UInt32* ftab;
- Int32 origPtr;
-
- /* aliases for arr1 and arr2 */
- UInt32* ptr;
- UChar* block;
- UInt16* mtfv;
- UChar* zbits;
-
- /* for deciding when to use the fallback sorting algorithm */
- Int32 workFactor;
-
- /* run-length-encoding of the input */
- UInt32 state_in_ch;
- Int32 state_in_len;
- BZ_RAND_DECLS;
-
- /* input and output limits and current posns */
- Int32 nblock;
- Int32 nblockMAX;
- Int32 numZ;
- Int32 state_out_pos;
-
- /* map of bytes used in block */
- Int32 nInUse;
- Bool inUse[256];
- UChar unseqToSeq[256];
-
- /* the buffer for bit stream creation */
- UInt32 bsBuff;
- Int32 bsLive;
-
- /* block and combined CRCs */
- UInt32 blockCRC;
- UInt32 combinedCRC;
-
- /* misc administratium */
- Int32 verbosity;
- Int32 blockNo;
- Int32 blockSize100k;
-
- /* stuff for coding the MTF values */
- Int32 nMTF;
- Int32 mtfFreq [BZ_MAX_ALPHA_SIZE];
- UChar selector [BZ_MAX_SELECTORS];
- UChar selectorMtf[BZ_MAX_SELECTORS];
-
- UChar len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
- Int32 code [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
- Int32 rfreq [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
- /* second dimension: only 3 needed; 4 makes index calculations faster */
- UInt32 len_pack[BZ_MAX_ALPHA_SIZE][4];
-
- }
- EState;
-
-
-
-/*-- externs for compression. --*/
-
-extern void
-BZ2_blockSort ( EState* );
-
-extern void
-BZ2_compressBlock ( EState*, Bool );
-
-extern void
-BZ2_bsInitWrite ( EState* );
-
-extern void
-BZ2_hbAssignCodes ( Int32*, UChar*, Int32, Int32, Int32 );
-
-extern void
-BZ2_hbMakeCodeLengths ( UChar*, Int32*, Int32, Int32 );
-
-
-
-/*-- states for decompression. --*/
-
-#define BZ_X_IDLE 1
-#define BZ_X_OUTPUT 2
-
-#define BZ_X_MAGIC_1 10
-#define BZ_X_MAGIC_2 11
-#define BZ_X_MAGIC_3 12
-#define BZ_X_MAGIC_4 13
-#define BZ_X_BLKHDR_1 14
-#define BZ_X_BLKHDR_2 15
-#define BZ_X_BLKHDR_3 16
-#define BZ_X_BLKHDR_4 17
-#define BZ_X_BLKHDR_5 18
-#define BZ_X_BLKHDR_6 19
-#define BZ_X_BCRC_1 20
-#define BZ_X_BCRC_2 21
-#define BZ_X_BCRC_3 22
-#define BZ_X_BCRC_4 23
-#define BZ_X_RANDBIT 24
-#define BZ_X_ORIGPTR_1 25
-#define BZ_X_ORIGPTR_2 26
-#define BZ_X_ORIGPTR_3 27
-#define BZ_X_MAPPING_1 28
-#define BZ_X_MAPPING_2 29
-#define BZ_X_SELECTOR_1 30
-#define BZ_X_SELECTOR_2 31
-#define BZ_X_SELECTOR_3 32
-#define BZ_X_CODING_1 33
-#define BZ_X_CODING_2 34
-#define BZ_X_CODING_3 35
-#define BZ_X_MTF_1 36
-#define BZ_X_MTF_2 37
-#define BZ_X_MTF_3 38
-#define BZ_X_MTF_4 39
-#define BZ_X_MTF_5 40
-#define BZ_X_MTF_6 41
-#define BZ_X_ENDHDR_2 42
-#define BZ_X_ENDHDR_3 43
-#define BZ_X_ENDHDR_4 44
-#define BZ_X_ENDHDR_5 45
-#define BZ_X_ENDHDR_6 46
-#define BZ_X_CCRC_1 47
-#define BZ_X_CCRC_2 48
-#define BZ_X_CCRC_3 49
-#define BZ_X_CCRC_4 50
-
-
-
-/*-- Constants for the fast MTF decoder. --*/
-
-#define MTFA_SIZE 4096
-#define MTFL_SIZE 16
-
-
-
-/*-- Structure holding all the decompression-side stuff. --*/
-
-typedef
- struct {
- /* pointer back to the struct bz_stream */
- bz_stream* strm;
-
- /* state indicator for this stream */
- Int32 state;
-
- /* for doing the final run-length decoding */
- UChar state_out_ch;
- Int32 state_out_len;
- Bool blockRandomised;
- BZ_RAND_DECLS;
-
- /* the buffer for bit stream reading */
- UInt32 bsBuff;
- Int32 bsLive;
-
- /* misc administratium */
- Int32 blockSize100k;
- Bool smallDecompress;
- Int32 currBlockNo;
- Int32 verbosity;
-
- /* for undoing the Burrows-Wheeler transform */
- Int32 origPtr;
- UInt32 tPos;
- Int32 k0;
- Int32 unzftab[256];
- Int32 nblock_used;
- Int32 cftab[257];
- Int32 cftabCopy[257];
-
- /* for undoing the Burrows-Wheeler transform (FAST) */
- UInt32 *tt;
-
- /* for undoing the Burrows-Wheeler transform (SMALL) */
- UInt16 *ll16;
- UChar *ll4;
-
- /* stored and calculated CRCs */
- UInt32 storedBlockCRC;
- UInt32 storedCombinedCRC;
- UInt32 calculatedBlockCRC;
- UInt32 calculatedCombinedCRC;
-
- /* map of bytes used in block */
- Int32 nInUse;
- Bool inUse[256];
- Bool inUse16[16];
- UChar seqToUnseq[256];
-
- /* for decoding the MTF values */
- UChar mtfa [MTFA_SIZE];
- Int32 mtfbase[256 / MTFL_SIZE];
- UChar selector [BZ_MAX_SELECTORS];
- UChar selectorMtf[BZ_MAX_SELECTORS];
- UChar len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-
- Int32 limit [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
- Int32 base [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
- Int32 perm [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
- Int32 minLens[BZ_N_GROUPS];
-
- /* save area for scalars in the main decompress code */
- Int32 save_i;
- Int32 save_j;
- Int32 save_t;
- Int32 save_alphaSize;
- Int32 save_nGroups;
- Int32 save_nSelectors;
- Int32 save_EOB;
- Int32 save_groupNo;
- Int32 save_groupPos;
- Int32 save_nextSym;
- Int32 save_nblockMAX;
- Int32 save_nblock;
- Int32 save_es;
- Int32 save_N;
- Int32 save_curr;
- Int32 save_zt;
- Int32 save_zn;
- Int32 save_zvec;
- Int32 save_zj;
- Int32 save_gSel;
- Int32 save_gMinlen;
- Int32* save_gLimit;
- Int32* save_gBase;
- Int32* save_gPerm;
-
- }
- DState;
-
-
-
-/*-- Macros for decompression. --*/
-
-#define BZ_GET_FAST(cccc) \
- s->tPos = s->tt[s->tPos]; \
- cccc = (UChar)(s->tPos & 0xff); \
- s->tPos >>= 8;
-
-#define BZ_GET_FAST_C(cccc) \
- c_tPos = c_tt[c_tPos]; \
- cccc = (UChar)(c_tPos & 0xff); \
- c_tPos >>= 8;
-
-#define SET_LL4(i,n) \
- { if (((i) & 0x1) == 0) \
- s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0xf0) | (n); else \
- s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0x0f) | ((n) << 4); \
- }
-
-#define GET_LL4(i) \
- ((((UInt32)(s->ll4[(i) >> 1])) >> (((i) << 2) & 0x4)) & 0xF)
-
-#define SET_LL(i,n) \
- { s->ll16[i] = (UInt16)(n & 0x0000ffff); \
- SET_LL4(i, n >> 16); \
- }
-
-#define GET_LL(i) \
- (((UInt32)s->ll16[i]) | (GET_LL4(i) << 16))
-
-#define BZ_GET_SMALL(cccc) \
- cccc = BZ2_indexIntoF ( s->tPos, s->cftab ); \
- s->tPos = GET_LL(s->tPos);
-
-
-/*-- externs for decompression. --*/
-
-extern Int32
-BZ2_indexIntoF ( Int32, Int32* );
-
-extern Int32
-BZ2_decompress ( DState* );
-
-extern void
-BZ2_hbCreateDecodeTables ( Int32*, Int32*, Int32*, UChar*,
- Int32, Int32, Int32 );
-
-
-#endif
-
-
-/*-- BZ_NO_STDIO seems to make NULL disappear on some platforms. --*/
-
-#ifdef BZ_NO_STDIO
-#ifndef NULL
-#define NULL 0
-#endif
-#endif
-
-
-/*-------------------------------------------------------------*/
-/*--- end bzlib_private.h ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/compress.c b/mdk-stage1/bzlib/compress.c
deleted file mode 100644
index 58d5abe7c..000000000
--- a/mdk-stage1/bzlib/compress.c
+++ /dev/null
@@ -1,720 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Compression machinery (not incl block sorting) ---*/
-/*--- compress.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2000 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-/*--
- CHANGES
- ~~~~~~~
- 0.9.0 -- original version.
-
- 0.9.0a/b -- no changes in this file.
-
- 0.9.0c
- * changed setting of nGroups in sendMTFValues() so as to
- do a bit better on small files
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-/*--- Bit stream I/O ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-void BZ2_bsInitWrite ( EState* s )
-{
- s->bsLive = 0;
- s->bsBuff = 0;
-}
-
-
-/*---------------------------------------------------*/
-static
-void bsFinishWrite ( EState* s )
-{
- while (s->bsLive > 0) {
- s->zbits[s->numZ] = (UChar)(s->bsBuff >> 24);
- s->numZ++;
- s->bsBuff <<= 8;
- s->bsLive -= 8;
- }
-}
-
-
-/*---------------------------------------------------*/
-#define bsNEEDW(nz) \
-{ \
- while (s->bsLive >= 8) { \
- s->zbits[s->numZ] \
- = (UChar)(s->bsBuff >> 24); \
- s->numZ++; \
- s->bsBuff <<= 8; \
- s->bsLive -= 8; \
- } \
-}
-
-
-/*---------------------------------------------------*/
-static
-__inline__
-void bsW ( EState* s, Int32 n, UInt32 v )
-{
- bsNEEDW ( n );
- s->bsBuff |= (v << (32 - s->bsLive - n));
- s->bsLive += n;
-}
-
-
-/*---------------------------------------------------*/
-static
-void bsPutUInt32 ( EState* s, UInt32 u )
-{
- bsW ( s, 8, (u >> 24) & 0xffL );
- bsW ( s, 8, (u >> 16) & 0xffL );
- bsW ( s, 8, (u >> 8) & 0xffL );
- bsW ( s, 8, u & 0xffL );
-}
-
-
-/*---------------------------------------------------*/
-static
-void bsPutUChar ( EState* s, UChar c )
-{
- bsW( s, 8, (UInt32)c );
-}
-
-
-/*---------------------------------------------------*/
-/*--- The back end proper ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-static
-void makeMaps_e ( EState* s )
-{
- Int32 i;
- s->nInUse = 0;
- for (i = 0; i < 256; i++)
- if (s->inUse[i]) {
- s->unseqToSeq[i] = s->nInUse;
- s->nInUse++;
- }
-}
-
-
-/*---------------------------------------------------*/
-static
-void generateMTFValues ( EState* s )
-{
- UChar yy[256];
- Int32 i, j;
- Int32 zPend;
- Int32 wr;
- Int32 EOB;
-
- /*
- After sorting (eg, here),
- s->arr1 [ 0 .. s->nblock-1 ] holds sorted order,
- and
- ((UChar*)s->arr2) [ 0 .. s->nblock-1 ]
- holds the original block data.
-
- The first thing to do is generate the MTF values,
- and put them in
- ((UInt16*)s->arr1) [ 0 .. s->nblock-1 ].
- Because there are strictly fewer or equal MTF values
- than block values, ptr values in this area are overwritten
- with MTF values only when they are no longer needed.
-
- The final compressed bitstream is generated into the
- area starting at
- (UChar*) (&((UChar*)s->arr2)[s->nblock])
-
- These storage aliases are set up in bzCompressInit(),
- except for the last one, which is arranged in
- compressBlock().
- */
- UInt32* ptr = s->ptr;
- UChar* block = s->block;
- UInt16* mtfv = s->mtfv;
-
- makeMaps_e ( s );
- EOB = s->nInUse+1;
-
- for (i = 0; i <= EOB; i++) s->mtfFreq[i] = 0;
-
- wr = 0;
- zPend = 0;
- for (i = 0; i < s->nInUse; i++) yy[i] = (UChar) i;
-
- for (i = 0; i < s->nblock; i++) {
- UChar ll_i;
- AssertD ( wr <= i, "generateMTFValues(1)" );
- j = ptr[i]-1; if (j < 0) j += s->nblock;
- ll_i = s->unseqToSeq[block[j]];
- AssertD ( ll_i < s->nInUse, "generateMTFValues(2a)" );
-
- if (yy[0] == ll_i) {
- zPend++;
- } else {
-
- if (zPend > 0) {
- zPend--;
- while (True) {
- if (zPend & 1) {
- mtfv[wr] = BZ_RUNB; wr++;
- s->mtfFreq[BZ_RUNB]++;
- } else {
- mtfv[wr] = BZ_RUNA; wr++;
- s->mtfFreq[BZ_RUNA]++;
- }
- if (zPend < 2) break;
- zPend = (zPend - 2) / 2;
- };
- zPend = 0;
- }
- {
- register UChar rtmp;
- register UChar* ryy_j;
- register UChar rll_i;
- rtmp = yy[1];
- yy[1] = yy[0];
- ryy_j = &(yy[1]);
- rll_i = ll_i;
- while ( rll_i != rtmp ) {
- register UChar rtmp2;
- ryy_j++;
- rtmp2 = rtmp;
- rtmp = *ryy_j;
- *ryy_j = rtmp2;
- };
- yy[0] = rtmp;
- j = ryy_j - &(yy[0]);
- mtfv[wr] = j+1; wr++; s->mtfFreq[j+1]++;
- }
-
- }
- }
-
- if (zPend > 0) {
- zPend--;
- while (True) {
- if (zPend & 1) {
- mtfv[wr] = BZ_RUNB; wr++;
- s->mtfFreq[BZ_RUNB]++;
- } else {
- mtfv[wr] = BZ_RUNA; wr++;
- s->mtfFreq[BZ_RUNA]++;
- }
- if (zPend < 2) break;
- zPend = (zPend - 2) / 2;
- };
- zPend = 0;
- }
-
- mtfv[wr] = EOB; wr++; s->mtfFreq[EOB]++;
-
- s->nMTF = wr;
-}
-
-
-/*---------------------------------------------------*/
-#define BZ_LESSER_ICOST 0
-#define BZ_GREATER_ICOST 15
-
-static
-void sendMTFValues ( EState* s )
-{
- Int32 v, t, i, j, gs, ge, totc, bt, bc, iter;
- Int32 nSelectors, alphaSize, minLen, maxLen, selCtr;
- Int32 nGroups, nBytes;
-
- /*--
- UChar len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
- is a global since the decoder also needs it.
-
- Int32 code[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
- Int32 rfreq[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
- are also globals only used in this proc.
- Made global to keep stack frame size small.
- --*/
-
-
- UInt16 cost[BZ_N_GROUPS];
- Int32 fave[BZ_N_GROUPS];
-
- UInt16* mtfv = s->mtfv;
-
- if (s->verbosity >= 3)
- VPrintf3( " %d in block, %d after MTF & 1-2 coding, "
- "%d+2 syms in use\n",
- s->nblock, s->nMTF, s->nInUse );
-
- alphaSize = s->nInUse+2;
- for (t = 0; t < BZ_N_GROUPS; t++)
- for (v = 0; v < alphaSize; v++)
- s->len[t][v] = BZ_GREATER_ICOST;
-
- /*--- Decide how many coding tables to use ---*/
- AssertH ( s->nMTF > 0, 3001 );
- if (s->nMTF < 200) nGroups = 2; else
- if (s->nMTF < 600) nGroups = 3; else
- if (s->nMTF < 1200) nGroups = 4; else
- if (s->nMTF < 2400) nGroups = 5; else
- nGroups = 6;
-
- /*--- Generate an initial set of coding tables ---*/
- {
- Int32 nPart, remF, tFreq, aFreq;
-
- nPart = nGroups;
- remF = s->nMTF;
- gs = 0;
- while (nPart > 0) {
- tFreq = remF / nPart;
- ge = gs-1;
- aFreq = 0;
- while (aFreq < tFreq && ge < alphaSize-1) {
- ge++;
- aFreq += s->mtfFreq[ge];
- }
-
- if (ge > gs
- && nPart != nGroups && nPart != 1
- && ((nGroups-nPart) % 2 == 1)) {
- aFreq -= s->mtfFreq[ge];
- ge--;
- }
-
- if (s->verbosity >= 3)
- VPrintf5( " initial group %d, [%d .. %d], "
- "has %d syms (%4.1f%%)\n",
- nPart, gs, ge, aFreq,
- (100.0 * (float)aFreq) / (float)(s->nMTF) );
-
- for (v = 0; v < alphaSize; v++)
- if (v >= gs && v <= ge)
- s->len[nPart-1][v] = BZ_LESSER_ICOST; else
- s->len[nPart-1][v] = BZ_GREATER_ICOST;
-
- nPart--;
- gs = ge+1;
- remF -= aFreq;
- }
- }
-
- /*---
- Iterate up to BZ_N_ITERS times to improve the tables.
- ---*/
- for (iter = 0; iter < BZ_N_ITERS; iter++) {
-
- for (t = 0; t < nGroups; t++) fave[t] = 0;
-
- for (t = 0; t < nGroups; t++)
- for (v = 0; v < alphaSize; v++)
- s->rfreq[t][v] = 0;
-
- /*---
- Set up an auxiliary length table which is used to fast-track
- the common case (nGroups == 6).
- ---*/
- if (nGroups == 6) {
- for (v = 0; v < alphaSize; v++) {
- s->len_pack[v][0] = (s->len[1][v] << 16) | s->len[0][v];
- s->len_pack[v][1] = (s->len[3][v] << 16) | s->len[2][v];
- s->len_pack[v][2] = (s->len[5][v] << 16) | s->len[4][v];
- }
- }
-
- nSelectors = 0;
- totc = 0;
- gs = 0;
- while (True) {
-
- /*--- Set group start & end marks. --*/
- if (gs >= s->nMTF) break;
- ge = gs + BZ_G_SIZE - 1;
- if (ge >= s->nMTF) ge = s->nMTF-1;
-
- /*--
- Calculate the cost of this group as coded
- by each of the coding tables.
- --*/
- for (t = 0; t < nGroups; t++) cost[t] = 0;
-
- if (nGroups == 6 && 50 == ge-gs+1) {
- /*--- fast track the common case ---*/
- register UInt32 cost01, cost23, cost45;
- register UInt16 icv;
- cost01 = cost23 = cost45 = 0;
-
-# define BZ_ITER(nn) \
- icv = mtfv[gs+(nn)]; \
- cost01 += s->len_pack[icv][0]; \
- cost23 += s->len_pack[icv][1]; \
- cost45 += s->len_pack[icv][2]; \
-
- BZ_ITER(0); BZ_ITER(1); BZ_ITER(2); BZ_ITER(3); BZ_ITER(4);
- BZ_ITER(5); BZ_ITER(6); BZ_ITER(7); BZ_ITER(8); BZ_ITER(9);
- BZ_ITER(10); BZ_ITER(11); BZ_ITER(12); BZ_ITER(13); BZ_ITER(14);
- BZ_ITER(15); BZ_ITER(16); BZ_ITER(17); BZ_ITER(18); BZ_ITER(19);
- BZ_ITER(20); BZ_ITER(21); BZ_ITER(22); BZ_ITER(23); BZ_ITER(24);
- BZ_ITER(25); BZ_ITER(26); BZ_ITER(27); BZ_ITER(28); BZ_ITER(29);
- BZ_ITER(30); BZ_ITER(31); BZ_ITER(32); BZ_ITER(33); BZ_ITER(34);
- BZ_ITER(35); BZ_ITER(36); BZ_ITER(37); BZ_ITER(38); BZ_ITER(39);
- BZ_ITER(40); BZ_ITER(41); BZ_ITER(42); BZ_ITER(43); BZ_ITER(44);
- BZ_ITER(45); BZ_ITER(46); BZ_ITER(47); BZ_ITER(48); BZ_ITER(49);
-
-# undef BZ_ITER
-
- cost[0] = cost01 & 0xffff; cost[1] = cost01 >> 16;
- cost[2] = cost23 & 0xffff; cost[3] = cost23 >> 16;
- cost[4] = cost45 & 0xffff; cost[5] = cost45 >> 16;
-
- } else {
- /*--- slow version which correctly handles all situations ---*/
- for (i = gs; i <= ge; i++) {
- UInt16 icv = mtfv[i];
- for (t = 0; t < nGroups; t++) cost[t] += s->len[t][icv];
- }
- }
-
- /*--
- Find the coding table which is best for this group,
- and record its identity in the selector table.
- --*/
- bc = 999999999; bt = -1;
- for (t = 0; t < nGroups; t++)
- if (cost[t] < bc) { bc = cost[t]; bt = t; };
- totc += bc;
- fave[bt]++;
- s->selector[nSelectors] = bt;
- nSelectors++;
-
- /*--
- Increment the symbol frequencies for the selected table.
- --*/
- if (nGroups == 6 && 50 == ge-gs+1) {
- /*--- fast track the common case ---*/
-
-# define BZ_ITUR(nn) s->rfreq[bt][ mtfv[gs+(nn)] ]++
-
- BZ_ITUR(0); BZ_ITUR(1); BZ_ITUR(2); BZ_ITUR(3); BZ_ITUR(4);
- BZ_ITUR(5); BZ_ITUR(6); BZ_ITUR(7); BZ_ITUR(8); BZ_ITUR(9);
- BZ_ITUR(10); BZ_ITUR(11); BZ_ITUR(12); BZ_ITUR(13); BZ_ITUR(14);
- BZ_ITUR(15); BZ_ITUR(16); BZ_ITUR(17); BZ_ITUR(18); BZ_ITUR(19);
- BZ_ITUR(20); BZ_ITUR(21); BZ_ITUR(22); BZ_ITUR(23); BZ_ITUR(24);
- BZ_ITUR(25); BZ_ITUR(26); BZ_ITUR(27); BZ_ITUR(28); BZ_ITUR(29);
- BZ_ITUR(30); BZ_ITUR(31); BZ_ITUR(32); BZ_ITUR(33); BZ_ITUR(34);
- BZ_ITUR(35); BZ_ITUR(36); BZ_ITUR(37); BZ_ITUR(38); BZ_ITUR(39);
- BZ_ITUR(40); BZ_ITUR(41); BZ_ITUR(42); BZ_ITUR(43); BZ_ITUR(44);
- BZ_ITUR(45); BZ_ITUR(46); BZ_ITUR(47); BZ_ITUR(48); BZ_ITUR(49);
-
-# undef BZ_ITUR
-
- } else {
- /*--- slow version which correctly handles all situations ---*/
- for (i = gs; i <= ge; i++)
- s->rfreq[bt][ mtfv[i] ]++;
- }
-
- gs = ge+1;
- }
- if (s->verbosity >= 3) {
- VPrintf2 ( " pass %d: size is %d, grp uses are ",
- iter+1, totc/8 );
- for (t = 0; t < nGroups; t++)
- VPrintf1 ( "%d ", fave[t] );
- VPrintf0 ( "\n" );
- }
-
- /*--
- Recompute the tables based on the accumulated frequencies.
- --*/
- for (t = 0; t < nGroups; t++)
- BZ2_hbMakeCodeLengths ( &(s->len[t][0]), &(s->rfreq[t][0]),
- alphaSize, 20 );
- }
-
-
- AssertH( nGroups < 8, 3002 );
- AssertH( nSelectors < 32768 &&
- nSelectors <= (2 + (900000 / BZ_G_SIZE)),
- 3003 );
-
-
- /*--- Compute MTF values for the selectors. ---*/
- {
- UChar pos[BZ_N_GROUPS], ll_i, tmp2, tmp;
- for (i = 0; i < nGroups; i++) pos[i] = i;
- for (i = 0; i < nSelectors; i++) {
- ll_i = s->selector[i];
- j = 0;
- tmp = pos[j];
- while ( ll_i != tmp ) {
- j++;
- tmp2 = tmp;
- tmp = pos[j];
- pos[j] = tmp2;
- };
- pos[0] = tmp;
- s->selectorMtf[i] = j;
- }
- };
-
- /*--- Assign actual codes for the tables. --*/
- for (t = 0; t < nGroups; t++) {
- minLen = 32;
- maxLen = 0;
- for (i = 0; i < alphaSize; i++) {
- if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
- if (s->len[t][i] < minLen) minLen = s->len[t][i];
- }
- AssertH ( !(maxLen > 20), 3004 );
- AssertH ( !(minLen < 1), 3005 );
- BZ2_hbAssignCodes ( &(s->code[t][0]), &(s->len[t][0]),
- minLen, maxLen, alphaSize );
- }
-
- /*--- Transmit the mapping table. ---*/
- {
- Bool inUse16[16];
- for (i = 0; i < 16; i++) {
- inUse16[i] = False;
- for (j = 0; j < 16; j++)
- if (s->inUse[i * 16 + j]) inUse16[i] = True;
- }
-
- nBytes = s->numZ;
- for (i = 0; i < 16; i++)
- if (inUse16[i]) bsW(s,1,1); else bsW(s,1,0);
-
- for (i = 0; i < 16; i++)
- if (inUse16[i])
- for (j = 0; j < 16; j++) {
- if (s->inUse[i * 16 + j]) bsW(s,1,1); else bsW(s,1,0);
- }
-
- if (s->verbosity >= 3)
- VPrintf1( " bytes: mapping %d, ", s->numZ-nBytes );
- }
-
- /*--- Now the selectors. ---*/
- nBytes = s->numZ;
- bsW ( s, 3, nGroups );
- bsW ( s, 15, nSelectors );
- for (i = 0; i < nSelectors; i++) {
- for (j = 0; j < s->selectorMtf[i]; j++) bsW(s,1,1);
- bsW(s,1,0);
- }
- if (s->verbosity >= 3)
- VPrintf1( "selectors %d, ", s->numZ-nBytes );
-
- /*--- Now the coding tables. ---*/
- nBytes = s->numZ;
-
- for (t = 0; t < nGroups; t++) {
- Int32 curr = s->len[t][0];
- bsW ( s, 5, curr );
- for (i = 0; i < alphaSize; i++) {
- while (curr < s->len[t][i]) { bsW(s,2,2); curr++; /* 10 */ };
- while (curr > s->len[t][i]) { bsW(s,2,3); curr--; /* 11 */ };
- bsW ( s, 1, 0 );
- }
- }
-
- if (s->verbosity >= 3)
- VPrintf1 ( "code lengths %d, ", s->numZ-nBytes );
-
- /*--- And finally, the block data proper ---*/
- nBytes = s->numZ;
- selCtr = 0;
- gs = 0;
- while (True) {
- if (gs >= s->nMTF) break;
- ge = gs + BZ_G_SIZE - 1;
- if (ge >= s->nMTF) ge = s->nMTF-1;
- AssertH ( s->selector[selCtr] < nGroups, 3006 );
-
- if (nGroups == 6 && 50 == ge-gs+1) {
- /*--- fast track the common case ---*/
- UInt16 mtfv_i;
- UChar* s_len_sel_selCtr
- = &(s->len[s->selector[selCtr]][0]);
- Int32* s_code_sel_selCtr
- = &(s->code[s->selector[selCtr]][0]);
-
-# define BZ_ITAH(nn) \
- mtfv_i = mtfv[gs+(nn)]; \
- bsW ( s, \
- s_len_sel_selCtr[mtfv_i], \
- s_code_sel_selCtr[mtfv_i] )
-
- BZ_ITAH(0); BZ_ITAH(1); BZ_ITAH(2); BZ_ITAH(3); BZ_ITAH(4);
- BZ_ITAH(5); BZ_ITAH(6); BZ_ITAH(7); BZ_ITAH(8); BZ_ITAH(9);
- BZ_ITAH(10); BZ_ITAH(11); BZ_ITAH(12); BZ_ITAH(13); BZ_ITAH(14);
- BZ_ITAH(15); BZ_ITAH(16); BZ_ITAH(17); BZ_ITAH(18); BZ_ITAH(19);
- BZ_ITAH(20); BZ_ITAH(21); BZ_ITAH(22); BZ_ITAH(23); BZ_ITAH(24);
- BZ_ITAH(25); BZ_ITAH(26); BZ_ITAH(27); BZ_ITAH(28); BZ_ITAH(29);
- BZ_ITAH(30); BZ_ITAH(31); BZ_ITAH(32); BZ_ITAH(33); BZ_ITAH(34);
- BZ_ITAH(35); BZ_ITAH(36); BZ_ITAH(37); BZ_ITAH(38); BZ_ITAH(39);
- BZ_ITAH(40); BZ_ITAH(41); BZ_ITAH(42); BZ_ITAH(43); BZ_ITAH(44);
- BZ_ITAH(45); BZ_ITAH(46); BZ_ITAH(47); BZ_ITAH(48); BZ_ITAH(49);
-
-# undef BZ_ITAH
-
- } else {
- /*--- slow version which correctly handles all situations ---*/
- for (i = gs; i <= ge; i++) {
- bsW ( s,
- s->len [s->selector[selCtr]] [mtfv[i]],
- s->code [s->selector[selCtr]] [mtfv[i]] );
- }
- }
-
-
- gs = ge+1;
- selCtr++;
- }
- AssertH( selCtr == nSelectors, 3007 );
-
- if (s->verbosity >= 3)
- VPrintf1( "codes %d\n", s->numZ-nBytes );
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_compressBlock ( EState* s, Bool is_last_block )
-{
- if (s->nblock > 0) {
-
- BZ_FINALISE_CRC ( s->blockCRC );
- s->combinedCRC = (s->combinedCRC << 1) | (s->combinedCRC >> 31);
- s->combinedCRC ^= s->blockCRC;
- if (s->blockNo > 1) s->numZ = 0;
-
- if (s->verbosity >= 2)
- VPrintf4( " block %d: crc = 0x%8x, "
- "combined CRC = 0x%8x, size = %d\n",
- s->blockNo, s->blockCRC, s->combinedCRC, s->nblock );
-
- BZ2_blockSort ( s );
- }
-
- s->zbits = (UChar*) (&((UChar*)s->arr2)[s->nblock]);
-
- /*-- If this is the first block, create the stream header. --*/
- if (s->blockNo == 1) {
- BZ2_bsInitWrite ( s );
- bsPutUChar ( s, 'B' );
- bsPutUChar ( s, 'Z' );
- bsPutUChar ( s, 'h' );
- bsPutUChar ( s, (UChar)('0' + s->blockSize100k) );
- }
-
- if (s->nblock > 0) {
-
- bsPutUChar ( s, 0x31 ); bsPutUChar ( s, 0x41 );
- bsPutUChar ( s, 0x59 ); bsPutUChar ( s, 0x26 );
- bsPutUChar ( s, 0x53 ); bsPutUChar ( s, 0x59 );
-
- /*-- Now the block's CRC, so it is in a known place. --*/
- bsPutUInt32 ( s, s->blockCRC );
-
- /*--
- Now a single bit indicating (non-)randomisation.
- As of version 0.9.5, we use a better sorting algorithm
- which makes randomisation unnecessary. So always set
- the randomised bit to 'no'. Of course, the decoder
- still needs to be able to handle randomised blocks
- so as to maintain backwards compatibility with
- older versions of bzip2.
- --*/
- bsW(s,1,0);
-
- bsW ( s, 24, s->origPtr );
- generateMTFValues ( s );
- sendMTFValues ( s );
- }
-
-
- /*-- If this is the last block, add the stream trailer. --*/
- if (is_last_block) {
-
- bsPutUChar ( s, 0x17 ); bsPutUChar ( s, 0x72 );
- bsPutUChar ( s, 0x45 ); bsPutUChar ( s, 0x38 );
- bsPutUChar ( s, 0x50 ); bsPutUChar ( s, 0x90 );
- bsPutUInt32 ( s, s->combinedCRC );
- if (s->verbosity >= 2)
- VPrintf1( " final combined CRC = 0x%x\n ", s->combinedCRC );
- bsFinishWrite ( s );
- }
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end compress.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/crctable.c b/mdk-stage1/bzlib/crctable.c
deleted file mode 100644
index c0ea3f769..000000000
--- a/mdk-stage1/bzlib/crctable.c
+++ /dev/null
@@ -1,148 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Table for doing CRCs ---*/
-/*--- crctable.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2000 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*--
- I think this is an implementation of the AUTODIN-II,
- Ethernet & FDDI 32-bit CRC standard. Vaguely derived
- from code by Rob Warnock, in Section 51 of the
- comp.compression FAQ.
---*/
-
-UInt32 BZ2_crc32Table[256] = {
-
- /*-- Ugly, innit? --*/
-
- 0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
- 0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
- 0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
- 0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
- 0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
- 0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
- 0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
- 0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
- 0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
- 0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
- 0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
- 0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
- 0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
- 0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
- 0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
- 0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
- 0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
- 0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
- 0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
- 0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
- 0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
- 0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
- 0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
- 0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
- 0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
- 0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
- 0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
- 0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
- 0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
- 0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
- 0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
- 0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
- 0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
- 0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
- 0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
- 0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
- 0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
- 0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
- 0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
- 0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
- 0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
- 0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
- 0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
- 0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
- 0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
- 0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
- 0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
- 0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
- 0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
- 0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
- 0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
- 0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
- 0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
- 0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
- 0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
- 0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
- 0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
- 0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
- 0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
- 0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
- 0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
- 0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
- 0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
- 0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
-};
-
-
-/*-------------------------------------------------------------*/
-/*--- end crctable.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/decompress.c b/mdk-stage1/bzlib/decompress.c
deleted file mode 100644
index 65cf75d8f..000000000
--- a/mdk-stage1/bzlib/decompress.c
+++ /dev/null
@@ -1,664 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Decompression machinery ---*/
-/*--- decompress.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2000 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-static
-void makeMaps_d ( DState* s )
-{
- Int32 i;
- s->nInUse = 0;
- for (i = 0; i < 256; i++)
- if (s->inUse[i]) {
- s->seqToUnseq[s->nInUse] = i;
- s->nInUse++;
- }
-}
-
-
-/*---------------------------------------------------*/
-#define RETURN(rrr) \
- { retVal = rrr; goto save_state_and_return; };
-
-#define GET_BITS(lll,vvv,nnn) \
- case lll: s->state = lll; \
- while (True) { \
- if (s->bsLive >= nnn) { \
- UInt32 v; \
- v = (s->bsBuff >> \
- (s->bsLive-nnn)) & ((1 << nnn)-1); \
- s->bsLive -= nnn; \
- vvv = v; \
- break; \
- } \
- if (s->strm->avail_in == 0) RETURN(BZ_OK); \
- s->bsBuff \
- = (s->bsBuff << 8) | \
- ((UInt32) \
- (*((UChar*)(s->strm->next_in)))); \
- s->bsLive += 8; \
- s->strm->next_in++; \
- s->strm->avail_in--; \
- s->strm->total_in_lo32++; \
- if (s->strm->total_in_lo32 == 0) \
- s->strm->total_in_hi32++; \
- }
-
-#define GET_UCHAR(lll,uuu) \
- GET_BITS(lll,uuu,8)
-
-#define GET_BIT(lll,uuu) \
- GET_BITS(lll,uuu,1)
-
-/*---------------------------------------------------*/
-#define GET_MTF_VAL(label1,label2,lval) \
-{ \
- if (groupPos == 0) { \
- groupNo++; \
- if (groupNo >= nSelectors) \
- RETURN(BZ_DATA_ERROR); \
- groupPos = BZ_G_SIZE; \
- gSel = s->selector[groupNo]; \
- gMinlen = s->minLens[gSel]; \
- gLimit = &(s->limit[gSel][0]); \
- gPerm = &(s->perm[gSel][0]); \
- gBase = &(s->base[gSel][0]); \
- } \
- groupPos--; \
- zn = gMinlen; \
- GET_BITS(label1, zvec, zn); \
- while (1) { \
- if (zn > 20 /* the longest code */) \
- RETURN(BZ_DATA_ERROR); \
- if (zvec <= gLimit[zn]) break; \
- zn++; \
- GET_BIT(label2, zj); \
- zvec = (zvec << 1) | zj; \
- }; \
- if (zvec - gBase[zn] < 0 \
- || zvec - gBase[zn] >= BZ_MAX_ALPHA_SIZE) \
- RETURN(BZ_DATA_ERROR); \
- lval = gPerm[zvec - gBase[zn]]; \
-}
-
-
-/*---------------------------------------------------*/
-Int32 BZ2_decompress ( DState* s )
-{
- UChar uc;
- Int32 retVal;
- Int32 minLen, maxLen;
- bz_stream* strm = s->strm;
-
- /* stuff that needs to be saved/restored */
- Int32 i;
- Int32 j;
- Int32 t;
- Int32 alphaSize;
- Int32 nGroups;
- Int32 nSelectors;
- Int32 EOB;
- Int32 groupNo;
- Int32 groupPos;
- Int32 nextSym;
- Int32 nblockMAX;
- Int32 nblock;
- Int32 es;
- Int32 N;
- Int32 curr;
- Int32 zt;
- Int32 zn;
- Int32 zvec;
- Int32 zj;
- Int32 gSel;
- Int32 gMinlen;
- Int32* gLimit;
- Int32* gBase;
- Int32* gPerm;
-
- if (s->state == BZ_X_MAGIC_1) {
- /*initialise the save area*/
- s->save_i = 0;
- s->save_j = 0;
- s->save_t = 0;
- s->save_alphaSize = 0;
- s->save_nGroups = 0;
- s->save_nSelectors = 0;
- s->save_EOB = 0;
- s->save_groupNo = 0;
- s->save_groupPos = 0;
- s->save_nextSym = 0;
- s->save_nblockMAX = 0;
- s->save_nblock = 0;
- s->save_es = 0;
- s->save_N = 0;
- s->save_curr = 0;
- s->save_zt = 0;
- s->save_zn = 0;
- s->save_zvec = 0;
- s->save_zj = 0;
- s->save_gSel = 0;
- s->save_gMinlen = 0;
- s->save_gLimit = NULL;
- s->save_gBase = NULL;
- s->save_gPerm = NULL;
- }
-
- /*restore from the save area*/
- i = s->save_i;
- j = s->save_j;
- t = s->save_t;
- alphaSize = s->save_alphaSize;
- nGroups = s->save_nGroups;
- nSelectors = s->save_nSelectors;
- EOB = s->save_EOB;
- groupNo = s->save_groupNo;
- groupPos = s->save_groupPos;
- nextSym = s->save_nextSym;
- nblockMAX = s->save_nblockMAX;
- nblock = s->save_nblock;
- es = s->save_es;
- N = s->save_N;
- curr = s->save_curr;
- zt = s->save_zt;
- zn = s->save_zn;
- zvec = s->save_zvec;
- zj = s->save_zj;
- gSel = s->save_gSel;
- gMinlen = s->save_gMinlen;
- gLimit = s->save_gLimit;
- gBase = s->save_gBase;
- gPerm = s->save_gPerm;
-
- retVal = BZ_OK;
-
- switch (s->state) {
-
- GET_UCHAR(BZ_X_MAGIC_1, uc);
- if (uc != 'B') RETURN(BZ_DATA_ERROR_MAGIC);
-
- GET_UCHAR(BZ_X_MAGIC_2, uc);
- if (uc != 'Z') RETURN(BZ_DATA_ERROR_MAGIC);
-
- GET_UCHAR(BZ_X_MAGIC_3, uc)
- if (uc != 'h') RETURN(BZ_DATA_ERROR_MAGIC);
-
- GET_BITS(BZ_X_MAGIC_4, s->blockSize100k, 8)
- if (s->blockSize100k < '1' ||
- s->blockSize100k > '9') RETURN(BZ_DATA_ERROR_MAGIC);
- s->blockSize100k -= '0';
-
- if (s->smallDecompress) {
- s->ll16 = BZALLOC( s->blockSize100k * 100000 * sizeof(UInt16) );
- s->ll4 = BZALLOC(
- ((1 + s->blockSize100k * 100000) >> 1) * sizeof(UChar)
- );
- if (s->ll16 == NULL || s->ll4 == NULL) RETURN(BZ_MEM_ERROR);
- } else {
- s->tt = BZALLOC( s->blockSize100k * 100000 * sizeof(Int32) );
- if (s->tt == NULL) RETURN(BZ_MEM_ERROR);
- }
-
- GET_UCHAR(BZ_X_BLKHDR_1, uc);
-
- if (uc == 0x17) goto endhdr_2;
- if (uc != 0x31) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_2, uc);
- if (uc != 0x41) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_3, uc);
- if (uc != 0x59) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_4, uc);
- if (uc != 0x26) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_5, uc);
- if (uc != 0x53) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_BLKHDR_6, uc);
- if (uc != 0x59) RETURN(BZ_DATA_ERROR);
-
- s->currBlockNo++;
- if (s->verbosity >= 2)
- VPrintf1 ( "\n [%d: huff+mtf ", s->currBlockNo );
-
- s->storedBlockCRC = 0;
- GET_UCHAR(BZ_X_BCRC_1, uc);
- s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_BCRC_2, uc);
- s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_BCRC_3, uc);
- s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_BCRC_4, uc);
- s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-
- GET_BITS(BZ_X_RANDBIT, s->blockRandomised, 1);
-
- s->origPtr = 0;
- GET_UCHAR(BZ_X_ORIGPTR_1, uc);
- s->origPtr = (s->origPtr << 8) | ((Int32)uc);
- GET_UCHAR(BZ_X_ORIGPTR_2, uc);
- s->origPtr = (s->origPtr << 8) | ((Int32)uc);
- GET_UCHAR(BZ_X_ORIGPTR_3, uc);
- s->origPtr = (s->origPtr << 8) | ((Int32)uc);
-
- if (s->origPtr < 0)
- RETURN(BZ_DATA_ERROR);
- if (s->origPtr > 10 + 100000*s->blockSize100k)
- RETURN(BZ_DATA_ERROR);
-
- /*--- Receive the mapping table ---*/
- for (i = 0; i < 16; i++) {
- GET_BIT(BZ_X_MAPPING_1, uc);
- if (uc == 1)
- s->inUse16[i] = True; else
- s->inUse16[i] = False;
- }
-
- for (i = 0; i < 256; i++) s->inUse[i] = False;
-
- for (i = 0; i < 16; i++)
- if (s->inUse16[i])
- for (j = 0; j < 16; j++) {
- GET_BIT(BZ_X_MAPPING_2, uc);
- if (uc == 1) s->inUse[i * 16 + j] = True;
- }
- makeMaps_d ( s );
- if (s->nInUse == 0) RETURN(BZ_DATA_ERROR);
- alphaSize = s->nInUse+2;
-
- /*--- Now the selectors ---*/
- GET_BITS(BZ_X_SELECTOR_1, nGroups, 3);
- if (nGroups < 2 || nGroups > 6) RETURN(BZ_DATA_ERROR);
- GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15);
- if (nSelectors < 1) RETURN(BZ_DATA_ERROR);
- for (i = 0; i < nSelectors; i++) {
- j = 0;
- while (True) {
- GET_BIT(BZ_X_SELECTOR_3, uc);
- if (uc == 0) break;
- j++;
- if (j >= nGroups) RETURN(BZ_DATA_ERROR);
- }
- s->selectorMtf[i] = j;
- }
-
- /*--- Undo the MTF values for the selectors. ---*/
- {
- UChar pos[BZ_N_GROUPS], tmp, v;
- for (v = 0; v < nGroups; v++) pos[v] = v;
-
- for (i = 0; i < nSelectors; i++) {
- v = s->selectorMtf[i];
- tmp = pos[v];
- while (v > 0) { pos[v] = pos[v-1]; v--; }
- pos[0] = tmp;
- s->selector[i] = tmp;
- }
- }
-
- /*--- Now the coding tables ---*/
- for (t = 0; t < nGroups; t++) {
- GET_BITS(BZ_X_CODING_1, curr, 5);
- for (i = 0; i < alphaSize; i++) {
- while (True) {
- if (curr < 1 || curr > 20) RETURN(BZ_DATA_ERROR);
- GET_BIT(BZ_X_CODING_2, uc);
- if (uc == 0) break;
- GET_BIT(BZ_X_CODING_3, uc);
- if (uc == 0) curr++; else curr--;
- }
- s->len[t][i] = curr;
- }
- }
-
- /*--- Create the Huffman decoding tables ---*/
- for (t = 0; t < nGroups; t++) {
- minLen = 32;
- maxLen = 0;
- for (i = 0; i < alphaSize; i++) {
- if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
- if (s->len[t][i] < minLen) minLen = s->len[t][i];
- }
- BZ2_hbCreateDecodeTables (
- &(s->limit[t][0]),
- &(s->base[t][0]),
- &(s->perm[t][0]),
- &(s->len[t][0]),
- minLen, maxLen, alphaSize
- );
- s->minLens[t] = minLen;
- }
-
- /*--- Now the MTF values ---*/
-
- EOB = s->nInUse+1;
- nblockMAX = 100000 * s->blockSize100k;
- groupNo = -1;
- groupPos = 0;
-
- for (i = 0; i <= 255; i++) s->unzftab[i] = 0;
-
- /*-- MTF init --*/
- {
- Int32 ii, jj, kk;
- kk = MTFA_SIZE-1;
- for (ii = 256 / MTFL_SIZE - 1; ii >= 0; ii--) {
- for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
- s->mtfa[kk] = (UChar)(ii * MTFL_SIZE + jj);
- kk--;
- }
- s->mtfbase[ii] = kk + 1;
- }
- }
- /*-- end MTF init --*/
-
- nblock = 0;
- GET_MTF_VAL(BZ_X_MTF_1, BZ_X_MTF_2, nextSym);
-
- while (True) {
-
- if (nextSym == EOB) break;
-
- if (nextSym == BZ_RUNA || nextSym == BZ_RUNB) {
-
- es = -1;
- N = 1;
- do {
- if (nextSym == BZ_RUNA) es = es + (0+1) * N; else
- if (nextSym == BZ_RUNB) es = es + (1+1) * N;
- N = N * 2;
- GET_MTF_VAL(BZ_X_MTF_3, BZ_X_MTF_4, nextSym);
- }
- while (nextSym == BZ_RUNA || nextSym == BZ_RUNB);
-
- es++;
- uc = s->seqToUnseq[ s->mtfa[s->mtfbase[0]] ];
- s->unzftab[uc] += es;
-
- if (s->smallDecompress)
- while (es > 0) {
- if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
- s->ll16[nblock] = (UInt16)uc;
- nblock++;
- es--;
- }
- else
- while (es > 0) {
- if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
- s->tt[nblock] = (UInt32)uc;
- nblock++;
- es--;
- };
-
- continue;
-
- } else {
-
- if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
-
- /*-- uc = MTF ( nextSym-1 ) --*/
- {
- Int32 ii, jj, kk, pp, lno, off;
- UInt32 nn;
- nn = (UInt32)(nextSym - 1);
-
- if (nn < MTFL_SIZE) {
- /* avoid general-case expense */
- pp = s->mtfbase[0];
- uc = s->mtfa[pp+nn];
- while (nn > 3) {
- Int32 z = pp+nn;
- s->mtfa[(z) ] = s->mtfa[(z)-1];
- s->mtfa[(z)-1] = s->mtfa[(z)-2];
- s->mtfa[(z)-2] = s->mtfa[(z)-3];
- s->mtfa[(z)-3] = s->mtfa[(z)-4];
- nn -= 4;
- }
- while (nn > 0) {
- s->mtfa[(pp+nn)] = s->mtfa[(pp+nn)-1]; nn--;
- };
- s->mtfa[pp] = uc;
- } else {
- /* general case */
- lno = nn / MTFL_SIZE;
- off = nn % MTFL_SIZE;
- pp = s->mtfbase[lno] + off;
- uc = s->mtfa[pp];
- while (pp > s->mtfbase[lno]) {
- s->mtfa[pp] = s->mtfa[pp-1]; pp--;
- };
- s->mtfbase[lno]++;
- while (lno > 0) {
- s->mtfbase[lno]--;
- s->mtfa[s->mtfbase[lno]]
- = s->mtfa[s->mtfbase[lno-1] + MTFL_SIZE - 1];
- lno--;
- }
- s->mtfbase[0]--;
- s->mtfa[s->mtfbase[0]] = uc;
- if (s->mtfbase[0] == 0) {
- kk = MTFA_SIZE-1;
- for (ii = 256 / MTFL_SIZE-1; ii >= 0; ii--) {
- for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
- s->mtfa[kk] = s->mtfa[s->mtfbase[ii] + jj];
- kk--;
- }
- s->mtfbase[ii] = kk + 1;
- }
- }
- }
- }
- /*-- end uc = MTF ( nextSym-1 ) --*/
-
- s->unzftab[s->seqToUnseq[uc]]++;
- if (s->smallDecompress)
- s->ll16[nblock] = (UInt16)(s->seqToUnseq[uc]); else
- s->tt[nblock] = (UInt32)(s->seqToUnseq[uc]);
- nblock++;
-
- GET_MTF_VAL(BZ_X_MTF_5, BZ_X_MTF_6, nextSym);
- continue;
- }
- }
-
- /* Now we know what nblock is, we can do a better sanity
- check on s->origPtr.
- */
- if (s->origPtr < 0 || s->origPtr >= nblock)
- RETURN(BZ_DATA_ERROR);
-
- s->state_out_len = 0;
- s->state_out_ch = 0;
- BZ_INITIALISE_CRC ( s->calculatedBlockCRC );
- s->state = BZ_X_OUTPUT;
- if (s->verbosity >= 2) VPrintf0 ( "rt+rld" );
-
- /*-- Set up cftab to facilitate generation of T^(-1) --*/
- s->cftab[0] = 0;
- for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1];
- for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1];
-
- if (s->smallDecompress) {
-
- /*-- Make a copy of cftab, used in generation of T --*/
- for (i = 0; i <= 256; i++) s->cftabCopy[i] = s->cftab[i];
-
- /*-- compute the T vector --*/
- for (i = 0; i < nblock; i++) {
- uc = (UChar)(s->ll16[i]);
- SET_LL(i, s->cftabCopy[uc]);
- s->cftabCopy[uc]++;
- }
-
- /*-- Compute T^(-1) by pointer reversal on T --*/
- i = s->origPtr;
- j = GET_LL(i);
- do {
- Int32 tmp = GET_LL(j);
- SET_LL(j, i);
- i = j;
- j = tmp;
- }
- while (i != s->origPtr);
-
- s->tPos = s->origPtr;
- s->nblock_used = 0;
- if (s->blockRandomised) {
- BZ_RAND_INIT_MASK;
- BZ_GET_SMALL(s->k0); s->nblock_used++;
- BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK;
- } else {
- BZ_GET_SMALL(s->k0); s->nblock_used++;
- }
-
- } else {
-
- /*-- compute the T^(-1) vector --*/
- for (i = 0; i < nblock; i++) {
- uc = (UChar)(s->tt[i] & 0xff);
- s->tt[s->cftab[uc]] |= (i << 8);
- s->cftab[uc]++;
- }
-
- s->tPos = s->tt[s->origPtr] >> 8;
- s->nblock_used = 0;
- if (s->blockRandomised) {
- BZ_RAND_INIT_MASK;
- BZ_GET_FAST(s->k0); s->nblock_used++;
- BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK;
- } else {
- BZ_GET_FAST(s->k0); s->nblock_used++;
- }
-
- }
-
- RETURN(BZ_OK);
-
-
-
- endhdr_2:
-
- GET_UCHAR(BZ_X_ENDHDR_2, uc);
- if (uc != 0x72) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_ENDHDR_3, uc);
- if (uc != 0x45) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_ENDHDR_4, uc);
- if (uc != 0x38) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_ENDHDR_5, uc);
- if (uc != 0x50) RETURN(BZ_DATA_ERROR);
- GET_UCHAR(BZ_X_ENDHDR_6, uc);
- if (uc != 0x90) RETURN(BZ_DATA_ERROR);
-
- s->storedCombinedCRC = 0;
- GET_UCHAR(BZ_X_CCRC_1, uc);
- s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_CCRC_2, uc);
- s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_CCRC_3, uc);
- s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
- GET_UCHAR(BZ_X_CCRC_4, uc);
- s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-
- s->state = BZ_X_IDLE;
- RETURN(BZ_STREAM_END);
-
- default: AssertH ( False, 4001 );
- }
-
- AssertH ( False, 4002 );
-
- save_state_and_return:
-
- s->save_i = i;
- s->save_j = j;
- s->save_t = t;
- s->save_alphaSize = alphaSize;
- s->save_nGroups = nGroups;
- s->save_nSelectors = nSelectors;
- s->save_EOB = EOB;
- s->save_groupNo = groupNo;
- s->save_groupPos = groupPos;
- s->save_nextSym = nextSym;
- s->save_nblockMAX = nblockMAX;
- s->save_nblock = nblock;
- s->save_es = es;
- s->save_N = N;
- s->save_curr = curr;
- s->save_zt = zt;
- s->save_zn = zn;
- s->save_zvec = zvec;
- s->save_zj = zj;
- s->save_gSel = gSel;
- s->save_gMinlen = gMinlen;
- s->save_gLimit = gLimit;
- s->save_gBase = gBase;
- s->save_gPerm = gPerm;
-
- return retVal;
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end decompress.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/huffman.c b/mdk-stage1/bzlib/huffman.c
deleted file mode 100644
index 8994f0bb9..000000000
--- a/mdk-stage1/bzlib/huffman.c
+++ /dev/null
@@ -1,232 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Huffman coding low-level stuff ---*/
-/*--- huffman.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2000 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*---------------------------------------------------*/
-#define WEIGHTOF(zz0) ((zz0) & 0xffffff00)
-#define DEPTHOF(zz1) ((zz1) & 0x000000ff)
-#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))
-
-#define ADDWEIGHTS(zw1,zw2) \
- (WEIGHTOF(zw1)+WEIGHTOF(zw2)) | \
- (1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))
-
-#define UPHEAP(z) \
-{ \
- Int32 zz, tmp; \
- zz = z; tmp = heap[zz]; \
- while (weight[tmp] < weight[heap[zz >> 1]]) { \
- heap[zz] = heap[zz >> 1]; \
- zz >>= 1; \
- } \
- heap[zz] = tmp; \
-}
-
-#define DOWNHEAP(z) \
-{ \
- Int32 zz, yy, tmp; \
- zz = z; tmp = heap[zz]; \
- while (True) { \
- yy = zz << 1; \
- if (yy > nHeap) break; \
- if (yy < nHeap && \
- weight[heap[yy+1]] < weight[heap[yy]]) \
- yy++; \
- if (weight[tmp] < weight[heap[yy]]) break; \
- heap[zz] = heap[yy]; \
- zz = yy; \
- } \
- heap[zz] = tmp; \
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbMakeCodeLengths ( UChar *len,
- Int32 *freq,
- Int32 alphaSize,
- Int32 maxLen )
-{
- /*--
- Nodes and heap entries run from 1. Entry 0
- for both the heap and nodes is a sentinel.
- --*/
- Int32 nNodes, nHeap, n1, n2, i, j, k;
- Bool tooLong;
-
- Int32 heap [ BZ_MAX_ALPHA_SIZE + 2 ];
- Int32 weight [ BZ_MAX_ALPHA_SIZE * 2 ];
- Int32 parent [ BZ_MAX_ALPHA_SIZE * 2 ];
-
- for (i = 0; i < alphaSize; i++)
- weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8;
-
- while (True) {
-
- nNodes = alphaSize;
- nHeap = 0;
-
- heap[0] = 0;
- weight[0] = 0;
- parent[0] = -2;
-
- for (i = 1; i <= alphaSize; i++) {
- parent[i] = -1;
- nHeap++;
- heap[nHeap] = i;
- UPHEAP(nHeap);
- }
-
- AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 );
-
- while (nHeap > 1) {
- n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
- n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
- nNodes++;
- parent[n1] = parent[n2] = nNodes;
- weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]);
- parent[nNodes] = -1;
- nHeap++;
- heap[nHeap] = nNodes;
- UPHEAP(nHeap);
- }
-
- AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 );
-
- tooLong = False;
- for (i = 1; i <= alphaSize; i++) {
- j = 0;
- k = i;
- while (parent[k] >= 0) { k = parent[k]; j++; }
- len[i-1] = j;
- if (j > maxLen) tooLong = True;
- }
-
- if (! tooLong) break;
-
- for (i = 1; i < alphaSize; i++) {
- j = weight[i] >> 8;
- j = 1 + (j / 2);
- weight[i] = j << 8;
- }
- }
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbAssignCodes ( Int32 *code,
- UChar *length,
- Int32 minLen,
- Int32 maxLen,
- Int32 alphaSize )
-{
- Int32 n, vec, i;
-
- vec = 0;
- for (n = minLen; n <= maxLen; n++) {
- for (i = 0; i < alphaSize; i++)
- if (length[i] == n) { code[i] = vec; vec++; };
- vec <<= 1;
- }
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbCreateDecodeTables ( Int32 *limit,
- Int32 *base,
- Int32 *perm,
- UChar *length,
- Int32 minLen,
- Int32 maxLen,
- Int32 alphaSize )
-{
- Int32 pp, i, j, vec;
-
- pp = 0;
- for (i = minLen; i <= maxLen; i++)
- for (j = 0; j < alphaSize; j++)
- if (length[j] == i) { perm[pp] = j; pp++; };
-
- for (i = 0; i < BZ_MAX_CODE_LEN; i++) base[i] = 0;
- for (i = 0; i < alphaSize; i++) base[length[i]+1]++;
-
- for (i = 1; i < BZ_MAX_CODE_LEN; i++) base[i] += base[i-1];
-
- for (i = 0; i < BZ_MAX_CODE_LEN; i++) limit[i] = 0;
- vec = 0;
-
- for (i = minLen; i <= maxLen; i++) {
- vec += (base[i+1] - base[i]);
- limit[i] = vec-1;
- vec <<= 1;
- }
- for (i = minLen + 1; i <= maxLen; i++)
- base[i] = ((limit[i-1] + 1) << 1) - base[i];
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end huffman.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/randtable.c b/mdk-stage1/bzlib/randtable.c
deleted file mode 100644
index a1fc82cfb..000000000
--- a/mdk-stage1/bzlib/randtable.c
+++ /dev/null
@@ -1,128 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Table for randomising repetitive blocks ---*/
-/*--- randtable.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
- This file is a part of bzip2 and/or libbzip2, a program and
- library for lossless, block-sorting data compression.
-
- Copyright (C) 1996-2000 Julian R Seward. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- 2. The origin of this software must not be misrepresented; you must
- not claim that you wrote the original software. If you use this
- software in a product, an acknowledgment in the product
- documentation would be appreciated but is not required.
-
- 3. Altered source versions must be plainly marked as such, and must
- not be misrepresented as being the original software.
-
- 4. The name of the author may not be used to endorse or promote
- products derived from this software without specific prior written
- permission.
-
- THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
- OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
- GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
- Julian Seward, Cambridge, UK.
- jseward@acm.org
- bzip2/libbzip2 version 1.0 of 21 March 2000
-
- This program is based on (at least) the work of:
- Mike Burrows
- David Wheeler
- Peter Fenwick
- Alistair Moffat
- Radford Neal
- Ian H. Witten
- Robert Sedgewick
- Jon L. Bentley
-
- For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------*/
-Int32 BZ2_rNums[512] = {
- 619, 720, 127, 481, 931, 816, 813, 233, 566, 247,
- 985, 724, 205, 454, 863, 491, 741, 242, 949, 214,
- 733, 859, 335, 708, 621, 574, 73, 654, 730, 472,
- 419, 436, 278, 496, 867, 210, 399, 680, 480, 51,
- 878, 465, 811, 169, 869, 675, 611, 697, 867, 561,
- 862, 687, 507, 283, 482, 129, 807, 591, 733, 623,
- 150, 238, 59, 379, 684, 877, 625, 169, 643, 105,
- 170, 607, 520, 932, 727, 476, 693, 425, 174, 647,
- 73, 122, 335, 530, 442, 853, 695, 249, 445, 515,
- 909, 545, 703, 919, 874, 474, 882, 500, 594, 612,
- 641, 801, 220, 162, 819, 984, 589, 513, 495, 799,
- 161, 604, 958, 533, 221, 400, 386, 867, 600, 782,
- 382, 596, 414, 171, 516, 375, 682, 485, 911, 276,
- 98, 553, 163, 354, 666, 933, 424, 341, 533, 870,
- 227, 730, 475, 186, 263, 647, 537, 686, 600, 224,
- 469, 68, 770, 919, 190, 373, 294, 822, 808, 206,
- 184, 943, 795, 384, 383, 461, 404, 758, 839, 887,
- 715, 67, 618, 276, 204, 918, 873, 777, 604, 560,
- 951, 160, 578, 722, 79, 804, 96, 409, 713, 940,
- 652, 934, 970, 447, 318, 353, 859, 672, 112, 785,
- 645, 863, 803, 350, 139, 93, 354, 99, 820, 908,
- 609, 772, 154, 274, 580, 184, 79, 626, 630, 742,
- 653, 282, 762, 623, 680, 81, 927, 626, 789, 125,
- 411, 521, 938, 300, 821, 78, 343, 175, 128, 250,
- 170, 774, 972, 275, 999, 639, 495, 78, 352, 126,
- 857, 956, 358, 619, 580, 124, 737, 594, 701, 612,
- 669, 112, 134, 694, 363, 992, 809, 743, 168, 974,
- 944, 375, 748, 52, 600, 747, 642, 182, 862, 81,
- 344, 805, 988, 739, 511, 655, 814, 334, 249, 515,
- 897, 955, 664, 981, 649, 113, 974, 459, 893, 228,
- 433, 837, 553, 268, 926, 240, 102, 654, 459, 51,
- 686, 754, 806, 760, 493, 403, 415, 394, 687, 700,
- 946, 670, 656, 610, 738, 392, 760, 799, 887, 653,
- 978, 321, 576, 617, 626, 502, 894, 679, 243, 440,
- 680, 879, 194, 572, 640, 724, 926, 56, 204, 700,
- 707, 151, 457, 449, 797, 195, 791, 558, 945, 679,
- 297, 59, 87, 824, 713, 663, 412, 693, 342, 606,
- 134, 108, 571, 364, 631, 212, 174, 643, 304, 329,
- 343, 97, 430, 751, 497, 314, 983, 374, 822, 928,
- 140, 206, 73, 263, 980, 736, 876, 478, 430, 305,
- 170, 514, 364, 692, 829, 82, 855, 953, 676, 246,
- 369, 970, 294, 750, 807, 827, 150, 790, 288, 923,
- 804, 378, 215, 828, 592, 281, 565, 555, 710, 82,
- 896, 831, 547, 261, 524, 462, 293, 465, 502, 56,
- 661, 821, 976, 991, 658, 869, 905, 758, 745, 193,
- 768, 550, 608, 933, 378, 286, 215, 979, 792, 961,
- 61, 688, 793, 644, 986, 403, 106, 366, 905, 644,
- 372, 567, 466, 434, 645, 210, 389, 550, 919, 135,
- 780, 773, 635, 389, 707, 100, 626, 958, 165, 504,
- 920, 176, 193, 713, 857, 265, 203, 50, 668, 108,
- 645, 990, 626, 197, 510, 357, 358, 850, 858, 364,
- 936, 638
-};
-
-
-/*-------------------------------------------------------------*/
-/*--- end randtable.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/cdrom.c b/mdk-stage1/cdrom.c
deleted file mode 100644
index c3ff2e802..000000000
--- a/mdk-stage1/cdrom.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <sys/mount.h>
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-
-#include "cdrom.h"
-
-
-static int mount_that_cd_device(char * dev_name)
-{
- char device_fullname[50];
-
- strcpy(device_fullname, "/dev/");
- strcat(device_fullname, dev_name);
-
- return my_mount(device_fullname, IMAGE_LOCATION, "iso9660", 0);
-}
-
-
-static int test_that_cd()
-{
- return access(IMAGE_LOCATION LIVE_LOCATION, R_OK);
-}
-
-
-static enum return_type try_with_device(char * dev_name, char * dev_model);
-
-static enum return_type do_with_device(char * dev_name, char * dev_model)
-{
- if (test_that_cd()) {
- enum return_type results;
- umount(IMAGE_LOCATION);
- results = ask_yes_no("That CDROM disc does not seem to be a " DISTRIB_NAME " Installation CDROM.\nRetry with another disc?");
- if (results == RETURN_OK)
- return try_with_device(dev_name, dev_model);
- return results;
- }
-
- log_message("found a " DISTRIB_NAME " CDROM, good news!");
-
- if (IS_SPECIAL_STAGE2 || ramdisk_possible())
- load_ramdisk(); /* we don't care about return code, we'll do it live if we failed */
-
- if (IS_RESCUE)
- umount(IMAGE_LOCATION);
-
- method_name = strdup("cdrom");
- return RETURN_OK;
-}
-
-static enum return_type try_with_device(char * dev_name, char * dev_model)
-{
- wait_message("Trying to access a CDROM disc (drive %s)", dev_model);
-
- if (mount_that_cd_device(dev_name) == -1) {
- enum return_type results;
- char msg[500];
- unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
- remove_wait_message();
-
- snprintf(msg, sizeof(msg), "I can't access a " DISTRIB_NAME " Installation disc in your CDROM drive (%s).\nRetry?", dev_model);
- results = ask_yes_no(msg);
- if (results == RETURN_OK)
- return try_with_device(dev_name, dev_model);
- return results;
- }
- remove_wait_message();
-
- return do_with_device(dev_name, dev_model);
-}
-
-enum return_type cdrom_prepare(void)
-{
- char ** medias, ** ptr, ** medias_models;
- char * choice;
- int i, count = 0;
- enum return_type results;
-
- my_insmod("ide-cd", ANY_DRIVER_TYPE, NULL);
- my_insmod("sr_mod", ANY_DRIVER_TYPE, NULL);
-
- get_medias(CDROM, &medias, &medias_models);
-
- ptr = medias;
- while (ptr && *ptr) {
- count++;
- ptr++;
- }
-
- if (count == 0) {
- stg1_error_message("No CDROM device found.");
- i = ask_insmod(SCSI_ADAPTERS);
- if (i == RETURN_BACK)
- return RETURN_BACK;
- return cdrom_prepare();
- }
-
- if (count == 1) {
- results = try_with_device(*medias, *medias_models);
- if (results == RETURN_OK)
- return RETURN_OK;
- i = ask_insmod(SCSI_ADAPTERS);
- if (i == RETURN_BACK)
- return RETURN_BACK;
- return cdrom_prepare();
- }
-
- if (IS_AUTOMATIC) {
- char ** model = medias_models;
- ptr = medias;
- while (ptr && *ptr) {
- wait_message("Trying to access " DISTRIB_NAME " CDROM disc (drive %s)", *model);
- if (mount_that_cd_device(*ptr) != -1) {
- if (!test_that_cd()) {
- remove_wait_message();
- return do_with_device(*ptr, *model);
- }
- else
- umount(IMAGE_LOCATION);
- }
- remove_wait_message();
- ptr++;
- model++;
- }
- unset_param(MODE_AUTOMATIC);
- return cdrom_prepare();
- }
- else {
- results = ask_from_list_comments("Please choose the CDROM drive to use for the installation.", medias, medias_models, &choice);
- if (results == RETURN_OK) {
- char ** model = medias_models;
- ptr = medias;
- while (ptr && *ptr && model && *model) {
- if (!strcmp(*ptr, choice))
- break;
- ptr++;
- model++;
- }
- results = try_with_device(choice, *model);
- } else
- return results;
- }
-
- if (results == RETURN_OK)
- return RETURN_OK;
- if (results == RETURN_BACK)
- return cdrom_prepare();
-
- i = ask_insmod(SCSI_ADAPTERS);
- if (i == RETURN_BACK)
- return RETURN_BACK;
- return cdrom_prepare();
-}
diff --git a/mdk-stage1/cdrom.h b/mdk-stage1/cdrom.h
deleted file mode 100644
index 639487eed..000000000
--- a/mdk-stage1/cdrom.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#ifndef _CDROM_H_
-#define _CDROM_H_
-
-#include "stage1.h"
-
-enum return_type cdrom_prepare(void);
-
-#endif
diff --git a/mdk-stage1/config-stage1.h b/mdk-stage1/config-stage1.h
deleted file mode 100644
index 3af38a446..000000000
--- a/mdk-stage1/config-stage1.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _CONFIG_STAGE1_H_
-#define _CONFIG_STAGE1_H_
-
-#define _GNU_SOURCE 1
-
-
-/* If we have more than that amount of memory (in Mbytes), we assume we can load the second stage as a ramdisk */
-#define MEM_LIMIT_RAMDISK 52
-
-/* If we have more than that amount of memory (in Mbytes), we assume we can load the rescue as a ramdisk */
-#define MEM_LIMIT_RESCUE 40
-
-#define DISTRIB_NAME "Mandrake Linux"
-
-#define RAMDISK_COMPRESSION_RATIO 1.95
-
-#define LIVE_LOCATION "/Mandrake/mdkinst/"
-#define RAMDISK_LOCATION "/Mandrake/base/"
-#define IMAGE_LOCATION "/tmp/image"
-#define STAGE2_LOCATION "/tmp/stage2"
-
-/* user-definable (in Makefile): DISABLE_NETWORK, DISABLE_DISK, DISABLE_CDROM, DISABLE_PCMCIA */
-
-
-/* some factorizing for disabling more features */
-
-#ifdef DISABLE_DISK
-#ifdef DISABLE_CDROM
-#define DISABLE_MEDIAS
-#endif
-#endif
-
-
-#endif
diff --git a/mdk-stage1/dhcp.c b/mdk-stage1/dhcp.c
deleted file mode 100644
index 32c7a932b..000000000
--- a/mdk-stage1/dhcp.c
+++ /dev/null
@@ -1,679 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-/*
- * Portions from GRUB -- GRand Unified Bootloader
- * Copyright (C) 2000 Free Software Foundation, Inc.
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <net/if.h>
-#include <arpa/inet.h>
-#include <net/route.h>
-#include <errno.h>
-#include <net/ethernet.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-#include <sys/time.h>
-#include <time.h>
-#include <fcntl.h>
-#include <sys/poll.h>
-
-#include "stage1.h"
-#include "log.h"
-#include "network.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "dhcp.h"
-
-
-typedef int bp_int32;
-typedef short bp_int16;
-
-#define BOOTP_OPTION_NETMASK 1
-#define BOOTP_OPTION_GATEWAY 3
-#define BOOTP_OPTION_DNS 6
-#define BOOTP_OPTION_HOSTNAME 12
-#define BOOTP_OPTION_DOMAIN 15
-#define BOOTP_OPTION_BROADCAST 28
-
-#define DHCP_OPTION_REQADDR 50
-#define DHCP_OPTION_LEASE 51
-#define DHCP_OPTION_TYPE 53
-#define DHCP_OPTION_SERVER 54
-#define DHCP_OPTION_OPTIONREQ 55
-#define DHCP_OPTION_MAXSIZE 57
-
-#define DHCP_OPTION_CLIENT_IDENTIFIER 61
-
-#define BOOTP_CLIENT_PORT 68
-#define BOOTP_SERVER_PORT 67
-
-#define BOOTP_OPCODE_REQUEST 1
-#define BOOTP_OPCODE_REPLY 2
-
-#define DHCP_TYPE_DISCOVER 1
-#define DHCP_TYPE_OFFER 2
-#define DHCP_TYPE_REQUEST 3
-#define DHCP_TYPE_ACK 5
-#define DHCP_TYPE_RELEASE 7
-
-#define BOOTP_VENDOR_LENGTH 64
-#define DHCP_VENDOR_LENGTH 340
-
-struct bootp_request {
- char opcode;
- char hw;
- char hwlength;
- char hopcount;
- bp_int32 id;
- bp_int16 secs;
- bp_int16 flags;
- bp_int32 ciaddr, yiaddr, server_ip, bootp_gw_ip;
- char hwaddr[16];
- char servername[64];
- char bootfile[128];
- char vendor[DHCP_VENDOR_LENGTH];
-} ;
-
-static const char vendor_cookie[] = { 99, 130, 83, 99, 255 };
-
-
-static unsigned int verify_checksum(void * buf2, int length2)
-{
- unsigned int csum = 0;
- unsigned short * sp;
-
- for (sp = (unsigned short *) buf2; length2 > 0; (length2 -= 2), sp++)
- csum += *sp;
-
- while (csum >> 16)
- csum = (csum & 0xffff) + (csum >> 16);
-
- return (csum == 0xffff);
-}
-
-
-static int initial_setup_interface(char * device, int s) {
- struct sockaddr_in * addrp;
- struct ifreq req;
- struct rtentry route;
- int true = 1;
-
- addrp = (struct sockaddr_in *) &req.ifr_addr;
-
- strcpy(req.ifr_name, device);
- addrp->sin_family = AF_INET;
- addrp->sin_port = 0;
- memset(&addrp->sin_addr, 0, sizeof(addrp->sin_addr));
-
- req.ifr_flags = 0; /* take it down */
- if (ioctl(s, SIOCSIFFLAGS, &req)) {
- log_perror("SIOCSIFFLAGS (downing)");
- return -1;
- }
-
- addrp->sin_family = AF_INET;
- addrp->sin_addr.s_addr = htonl(0);
- if (ioctl(s, SIOCSIFADDR, &req)) {
- log_perror("SIOCSIFADDR");
- return -1;
- }
-
- req.ifr_flags = IFF_UP | IFF_BROADCAST | IFF_RUNNING;
- if (ioctl(s, SIOCSIFFLAGS, &req)) {
- log_perror("SIOCSIFFLAGS (upping)");
- return -1;
- }
-
- memset(&route, 0, sizeof(route));
- memcpy(&route.rt_gateway, addrp, sizeof(*addrp));
-
- addrp->sin_family = AF_INET;
- addrp->sin_port = 0;
- addrp->sin_addr.s_addr = INADDR_ANY;
- memcpy(&route.rt_dst, addrp, sizeof(*addrp));
- memcpy(&route.rt_genmask, addrp, sizeof(*addrp));
-
- route.rt_dev = device;
- route.rt_flags = RTF_UP;
- route.rt_metric = 0;
-
- if (ioctl(s, SIOCADDRT, &route)) {
- if (errno != EEXIST) {
- close(s);
- log_perror("SIOCADDRT");
- return -1;
- }
- }
-
- if (setsockopt(s, SOL_SOCKET, SO_BROADCAST, &true, sizeof(true))) {
- close(s);
- log_perror("setsockopt");
- return -1;
- }
-
- /* I need to sleep a bit in order for kernel to finish init of the
- network device; this would allow to not send further multiple
- dhcp requests when only one is needed. */
- wait_message("Bringing up networking...");
- sleep(2);
- remove_wait_message();
-
- return 0;
-}
-
-
-void set_missing_ip_info(struct interface_info * intf)
-{
- bp_int32 ipNum = *((bp_int32 *) &intf->ip);
- bp_int32 nmNum;
-
- if (intf->netmask.s_addr == 0)
- inet_aton(guess_netmask(inet_ntoa(intf->ip)), &intf->netmask);
-
- nmNum = *((bp_int32 *) &intf->netmask);
-
- if (intf->broadcast.s_addr == 0)
- *((bp_int32 *) &intf->broadcast) = (ipNum & nmNum) | ~(nmNum);
-
- if (intf->network.s_addr == 0)
- *((bp_int32 *) &intf->network) = ipNum & nmNum;
-}
-
-static void parse_reply(struct bootp_request * breq, struct interface_info * intf)
-{
- unsigned char * chptr;
- unsigned char option, length;
-
- if (breq->bootfile && strlen(breq->bootfile) > 0)
- stage2_kickstart = strdup(breq->bootfile);
-
- memcpy(&intf->ip, &breq->yiaddr, 4);
-
- chptr = breq->vendor;
- chptr += 4;
- while (*chptr != 0xFF && (void *) chptr < (void *) breq->vendor + DHCP_VENDOR_LENGTH) {
- char tmp_str[500];
- option = *chptr++;
- if (!option)
- continue;
- length = *chptr++;
-
- switch (option) {
- case BOOTP_OPTION_DNS:
- memcpy(&dns_server, chptr, sizeof(dns_server));
- log_message("got dns %s", inet_ntoa(dns_server));
- if (length >= sizeof(dns_server)*2) {
- memcpy(&dns_server2, chptr+sizeof(dns_server), sizeof(dns_server2));
- log_message("got dns2 %s", inet_ntoa(dns_server2));
- }
- break;
-
- case BOOTP_OPTION_NETMASK:
- memcpy(&intf->netmask, chptr, sizeof(intf->netmask));
- log_message("got netmask %s", inet_ntoa(intf->netmask));
- break;
-
- case BOOTP_OPTION_DOMAIN:
- memcpy(tmp_str, chptr, length);
- tmp_str[length] = '\0';
- domain = strdup(tmp_str);
- log_message("got domain %s", domain);
- break;
-
- case BOOTP_OPTION_BROADCAST:
- memcpy(&intf->broadcast, chptr, sizeof(intf->broadcast));
- log_message("got broadcast %s", inet_ntoa(intf->broadcast));
- break;
-
- case BOOTP_OPTION_GATEWAY:
- memcpy(&gateway, chptr, sizeof(gateway));
- log_message("got gateway %s", inet_ntoa(gateway));
- break;
-
- case BOOTP_OPTION_HOSTNAME:
- memcpy(tmp_str, chptr, length);
- tmp_str[length] = '\0';
- hostname = strdup(tmp_str);
- log_message("got hostname %s", hostname);
- break;
-
- }
-
- chptr += length;
- }
-
- set_missing_ip_info(intf);
-}
-
-
-static void init_vendor_codes(struct bootp_request * breq) {
- memcpy(breq->vendor, vendor_cookie, sizeof(vendor_cookie));
-}
-
-static char gen_hwaddr[16];
-
-static int prepare_request(struct bootp_request * breq, int sock, char * device)
-{
- struct ifreq req;
-
- memset(breq, 0, sizeof(*breq));
-
- breq->opcode = BOOTP_OPCODE_REQUEST;
-
- strcpy(req.ifr_name, device);
- if (ioctl(sock, SIOCGIFHWADDR, &req)) {
- log_perror("SIOCSIFHWADDR");
- return -1;
- }
-
- breq->hw = 1; /* ethernet */
- breq->hwlength = IFHWADDRLEN;
- memcpy(breq->hwaddr, req.ifr_hwaddr.sa_data, IFHWADDRLEN);
- memcpy(gen_hwaddr, req.ifr_hwaddr.sa_data, IFHWADDRLEN);
-
- breq->hopcount = 0;
-
- init_vendor_codes(breq);
-
- return 0;
-}
-
-static int get_vendor_code(struct bootp_request * bresp, unsigned char option, void * data)
-{
- unsigned char * chptr;
- unsigned int length, theOption;
-
- chptr = bresp->vendor + 4;
- while (*chptr != 0xFF && *chptr != option) {
- theOption = *chptr++;
- if (!theOption)
- continue;
- length = *chptr++;
- chptr += length;
- }
-
- if (*chptr++ == 0xff)
- return 1;
-
- length = *chptr++;
- memcpy(data, chptr, length);
-
- return 0;
-}
-
-
-static unsigned long currticks(void)
-{
- struct timeval tv;
- unsigned long csecs;
- unsigned long ticks_per_csec, ticks_per_usec;
-
- /* Note: 18.2 ticks/sec. */
-
- gettimeofday (&tv, 0);
- csecs = tv.tv_sec / 10;
- ticks_per_csec = csecs * 182;
- ticks_per_usec = (((tv.tv_sec - csecs * 10) * 1000000 + tv.tv_usec) * 182 / 10000000);
- return ticks_per_csec + ticks_per_usec;
-}
-
-
-#define BACKOFF_LIMIT 7
-#define TICKS_PER_SEC 18
-#define MAX_ARP_RETRIES 4
-
-static void rfc951_sleep(int exp)
-{
- static long seed = 0;
- long q;
- unsigned long tmo;
-
- if (exp > BACKOFF_LIMIT)
- exp = BACKOFF_LIMIT;
-
- if (!seed)
- /* Initialize linear congruential generator. */
- seed = (currticks () + *(long *) &gen_hwaddr + ((short *) gen_hwaddr)[2]);
-
- /* Simplified version of the LCG given in Bruce Scheier's
- "Applied Cryptography". */
- q = seed / 53668;
- if ((seed = 40014 * (seed - 53668 * q) - 12211 * q) < 0)
- seed += 2147483563l;
-
- /* Compute mask. */
- for (tmo = 63; tmo <= 60 * TICKS_PER_SEC && --exp > 0; tmo = 2 * tmo + 1)
- ;
-
- /* Sleep. */
- log_message("<sleep>");
-
- for (tmo = (tmo & seed) + currticks (); currticks () < tmo;);
-}
-
-
-static int handle_transaction(int s, struct bootp_request * breq, struct bootp_request * bresp,
- struct sockaddr_in * server_addr, int dhcp_type)
-{
- struct pollfd polls;
- int i, j;
- int retry = 1;
- int sin;
- char eth_packet[ETH_FRAME_LEN];
- struct iphdr * ip_hdr;
- struct udphdr * udp_hdr;
- unsigned char type;
- unsigned long starttime;
- int timeout = 1;
-
- breq->id = starttime = currticks();
- breq->secs = 0;
-
- sin = socket(AF_PACKET, SOCK_DGRAM, ntohs(ETH_P_IP));
- if (sin < 0) {
- log_perror("af_packet socket");
- return -1;
- }
-
- while (retry <= MAX_ARP_RETRIES) {
- i = sizeof(*breq);
-
- if (sendto(s, breq, i, 0, (struct sockaddr *) server_addr, sizeof(*server_addr)) != i) {
- close(s);
- log_perror("sendto");
- return -1;
- }
-
- polls.fd = sin;
- polls.events = POLLIN;
-
- while (poll(&polls, 1, timeout*1000) == 1) {
-
- if ((j = recv(sin, eth_packet, sizeof(eth_packet), 0)) == -1) {
- log_perror("recv");
- continue;
- }
-
- /* We need to do some basic sanity checking of the header */
- if (j < (signed)(sizeof(*ip_hdr) + sizeof(*udp_hdr)))
- continue;
-
- ip_hdr = (void *) eth_packet;
- if (!verify_checksum(ip_hdr, sizeof(*ip_hdr)))
- continue;
-
- if (ntohs(ip_hdr->tot_len) > j)
- continue;
-
- j = ntohs(ip_hdr->tot_len);
-
- if (ip_hdr->protocol != IPPROTO_UDP)
- continue;
-
- udp_hdr = (void *) (eth_packet + sizeof(*ip_hdr));
-
- if (ntohs(udp_hdr->source) != BOOTP_SERVER_PORT)
- continue;
-
- if (ntohs(udp_hdr->dest) != BOOTP_CLIENT_PORT)
- continue;
- /* Go on with this packet; it looks sane */
-
- /* Originally copied sizeof (*bresp) - this is a security
- problem due to a potential underflow of the source
- buffer. Also, it trusted that the packet was properly
- 0xFF terminated, which is not true in the case of the
- DHCP server on Cisco 800 series ISDN router. */
-
- memset (bresp, 0xFF, sizeof (*bresp));
- memcpy (bresp, (char *) udp_hdr + sizeof (*udp_hdr), j - sizeof (*ip_hdr) - sizeof (*udp_hdr));
-
- /* sanity checks */
- if (bresp->id != breq->id)
- continue;
- if (bresp->opcode != BOOTP_OPCODE_REPLY)
- continue;
- if (bresp->hwlength != breq->hwlength)
- continue;
- if (memcmp(bresp->hwaddr, breq->hwaddr, bresp->hwlength))
- continue;
- if (get_vendor_code(bresp, DHCP_OPTION_TYPE, &type) || type != dhcp_type)
- continue;
- if (memcmp(bresp->vendor, vendor_cookie, 4))
- continue;
- return 0;
- }
- rfc951_sleep(retry);
- breq->secs = htons ((currticks () - starttime) / 20);
- retry++;
- timeout *= 2;
- if (timeout > 5)
- timeout = 5;
- }
-
- return -1;
-}
-
-static void add_vendor_code(struct bootp_request * breq, unsigned char option, unsigned char length, void * data)
-{
- unsigned char * chptr;
- int theOption, theLength;
-
- chptr = breq->vendor;
- chptr += 4;
- while (*chptr != 0xFF && *chptr != option) {
- theOption = *chptr++;
- if (!theOption) continue;
- theLength = *chptr++;
- chptr += theLength;
- }
-
- *chptr++ = option;
- *chptr++ = length;
- memcpy(chptr, data, length);
- chptr[length] = 0xff;
-}
-
-
-char * dhcp_hostname = NULL;
-char * dhcp_domain = NULL;
-
-enum return_type perform_dhcp(struct interface_info * intf)
-{
- int s, i;
- struct sockaddr_in server_addr;
- struct sockaddr_in client_addr;
- struct sockaddr_in broadcast_addr;
- struct bootp_request breq, bresp;
- unsigned char messageType;
- unsigned int lease;
- short aShort;
- int num_options;
- char requested_options[50];
- char * client_id_str, * client_id_hwaddr;
-
- if (strncmp(intf->device, "eth", 3)) {
- stg1_error_message("DHCP available only for Ethernet networking.");
- return RETURN_ERROR;
- }
-
- s = socket(AF_INET, SOCK_DGRAM, 0);
- if (s < 0) {
- log_perror("socket");
- return RETURN_ERROR;
- }
-
- {
- enum return_type results;
- char * questions[] = { "Host name", "Domain name", NULL };
- char * questions_auto[] = { "hostname", "domain" };
- static char ** answers = NULL;
- char * boulet;
-
- client_id_str = client_id_hwaddr = NULL;
-
- results = ask_from_entries_auto("If the DHCP server needs to know you by name; please fill in this information. "
- "Valid answers are for example: `mybox' for hostname and `mynetwork.com' for "
- "domain name, for a machine called `mybox.mynetwork.com' on the Internet.",
- questions, &answers, 32, questions_auto, NULL);
- if (results == RETURN_OK)
- {
- dhcp_hostname = answers[0];
- if ((boulet = strchr(dhcp_hostname, '.')) != NULL)
- boulet[0] = '\0';
- dhcp_domain = answers[1];
-
- if (*dhcp_hostname && *dhcp_domain) {
- /* if we have both, then create client id from them */
- client_id_str = malloc(1 + strlen(dhcp_hostname) + 1 + strlen(dhcp_domain) + 1);
- client_id_str[0] = '\0';
- sprintf(client_id_str+1, "%s.%s", dhcp_hostname, dhcp_domain);
- }
- }
- }
-
- if (initial_setup_interface(intf->device, s) != 0) {
- close(s);
- return RETURN_ERROR;
- }
-
- if (prepare_request(&breq, s, intf->device) != 0) {
- close(s);
- return RETURN_ERROR;
- }
-
- messageType = DHCP_TYPE_DISCOVER;
- add_vendor_code(&breq, DHCP_OPTION_TYPE, 1, &messageType);
-
- /* add pieces needed to have DDNS/DHCP IP selection based on requested name */
- if (dhcp_hostname && *dhcp_hostname) { /* pick client id form based on absence or presence of domain name */
- if (*dhcp_domain) /* alternate style <hostname>.<domainname> */
- add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, strlen(client_id_str+1)+1, client_id_str);
- else { /* usual style (aka windows / dhcpcd) */
- /* but put MAC in form required for client identifier first */
- client_id_hwaddr = malloc(IFHWADDRLEN+2);
- client_id_hwaddr[0] = 1; /* set flag for ethernet */
- memcpy(client_id_hwaddr+1, gen_hwaddr, IFHWADDRLEN);
- add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, IFHWADDRLEN+1, client_id_hwaddr);
- }
- /* this is the one that the dhcp server really wants for DDNS updates */
- add_vendor_code(&breq, BOOTP_OPTION_HOSTNAME, strlen(dhcp_hostname), dhcp_hostname);
- log_message("DHCP: telling server to use name = %s", dhcp_hostname);
- }
-
- memset(&client_addr.sin_addr, 0, sizeof(&client_addr.sin_addr));
- client_addr.sin_family = AF_INET;
- client_addr.sin_port = htons(BOOTP_CLIENT_PORT); /* bootp client */
-
- if (bind(s, (struct sockaddr *) &client_addr, sizeof(client_addr))) {
- log_perror("bind");
- return RETURN_ERROR;
- }
-
- broadcast_addr.sin_family = AF_INET;
- broadcast_addr.sin_port = htons(BOOTP_SERVER_PORT); /* bootp server */
- memset(&broadcast_addr.sin_addr, 0xff, sizeof(broadcast_addr.sin_addr)); /* broadcast */
-
- log_message("DHCP: sending DISCOVER");
-
- wait_message("Sending DHCP request...");
- i = handle_transaction(s, &breq, &bresp, &broadcast_addr, DHCP_TYPE_OFFER);
- remove_wait_message();
-
- if (i != 0) {
- stg1_error_message("No DHCP reply received.");
- close(s);
- return RETURN_ERROR;
- }
-
- server_addr.sin_family = AF_INET;
- server_addr.sin_port = htons(BOOTP_SERVER_PORT); /* bootp server */
- if (get_vendor_code(&bresp, DHCP_OPTION_SERVER, &server_addr.sin_addr)) {
- close(s);
- log_message("DHCPOFFER didn't include server address");
- return RETURN_ERROR;
- }
-
- init_vendor_codes(&breq);
- messageType = DHCP_TYPE_REQUEST;
- add_vendor_code(&breq, DHCP_OPTION_TYPE, 1, &messageType);
- add_vendor_code(&breq, DHCP_OPTION_SERVER, 4, &server_addr.sin_addr);
- add_vendor_code(&breq, DHCP_OPTION_REQADDR, 4, &bresp.yiaddr);
-
- /* if used the first time, then have to use it again */
- if (dhcp_hostname && *dhcp_hostname) { /* add pieces needed to have DDNS/DHCP IP selection based on requested name */
- if (dhcp_domain && *dhcp_domain) /* alternate style */
- add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, strlen(client_id_str+1)+1, client_id_str);
- else /* usual style (aka windows / dhcpcd) */
- add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, IFHWADDRLEN+1, client_id_hwaddr);
- /* this is the one that the dhcp server really wants for DDNS updates */
- add_vendor_code(&breq, BOOTP_OPTION_HOSTNAME, strlen(dhcp_hostname), dhcp_hostname);
- }
-
- aShort = ntohs(sizeof(struct bootp_request));
- add_vendor_code(&breq, DHCP_OPTION_MAXSIZE, 2, &aShort);
-
- num_options = 0;
- requested_options[num_options++] = BOOTP_OPTION_NETMASK;
- requested_options[num_options++] = BOOTP_OPTION_GATEWAY;
- requested_options[num_options++] = BOOTP_OPTION_DNS;
- requested_options[num_options++] = BOOTP_OPTION_DOMAIN;
- requested_options[num_options++] = BOOTP_OPTION_BROADCAST;
- add_vendor_code(&breq, DHCP_OPTION_OPTIONREQ, num_options, requested_options);
-
- /* request a lease of 1 hour */
- i = htonl(60 * 60);
- add_vendor_code(&breq, DHCP_OPTION_LEASE, 4, &i);
-
- log_message("DHCP: sending REQUEST");
-
- i = handle_transaction(s, &breq, &bresp, &broadcast_addr, DHCP_TYPE_ACK);
-
- if (i != 0) {
- close(s);
- return RETURN_ERROR;
- }
-
- if (get_vendor_code(&bresp, DHCP_OPTION_LEASE, &lease)) {
- log_message("failed to get lease time\n");
- return RETURN_ERROR;
- }
- lease = ntohl(lease);
-
- close(s);
-
- intf->netmask.s_addr = 0;
- intf->broadcast.s_addr = 0;
- intf->network.s_addr = 0;
-
- parse_reply(&bresp, intf);
-
- return RETURN_OK;
-}
diff --git a/mdk-stage1/dhcp.h b/mdk-stage1/dhcp.h
deleted file mode 100644
index 71d062e9c..000000000
--- a/mdk-stage1/dhcp.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * View the homepage: http://us.mandrakesoft.com/~gc/html/stage1.html
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from GRUB -- GRand Unified Bootloader
- * Copyright (C) 2000 Free Software Foundation, Inc.
- *
- * Itself based on etherboot-4.6.4 by Martin Renters.
- *
- */
-
-#ifndef _DHCP_H_
-#define _DHCP_H_
-
-#include "stage1.h"
-#include "network.h"
-
-enum return_type perform_dhcp(struct interface_info * intf);
-
-extern char * dhcp_hostname;
-
-#endif
diff --git a/mdk-stage1/dietlibc/.cvsignore b/mdk-stage1/dietlibc/.cvsignore
deleted file mode 100644
index 7c88cb004..000000000
--- a/mdk-stage1/dietlibc/.cvsignore
+++ /dev/null
@@ -1,12 +0,0 @@
-t
-elftrunc
-mapfile
-t1
-load
-compile
-bin-alpha
-bin-arm
-bin-i386
-bin-mips
-bin-ppc
-bin-sparc
diff --git a/mdk-stage1/dietlibc/AUTHOR b/mdk-stage1/dietlibc/AUTHOR
deleted file mode 100644
index 6d8ab1a05..000000000
--- a/mdk-stage1/dietlibc/AUTHOR
+++ /dev/null
@@ -1 +0,0 @@
-Felix von Leitner <felix-dietlibc@fefe.de>
diff --git a/mdk-stage1/dietlibc/Makefile b/mdk-stage1/dietlibc/Makefile
deleted file mode 100644
index b6e7b2783..000000000
--- a/mdk-stage1/dietlibc/Makefile
+++ /dev/null
@@ -1,146 +0,0 @@
-ARCH=$(shell uname -m | sed 's/i[4-9]86/i386/')
-
-OBJDIR=bin-$(ARCH)
-
-all: $(OBJDIR) $(OBJDIR)/start.o $(OBJDIR)/dietlibc.a $(OBJDIR)/liblatin1.a $(OBJDIR)/librpc.a $(OBJDIR)/diet
-
-CFLAGS=-pipe
-CROSS=
-
-VPATH=lib:libstdio:libugly:libcruft:libcrypt:libshell:liblatin1:librpc:libregex:syscalls.c
-
-SYSCALLOBJ=$(patsubst syscalls.s/%.S,$(OBJDIR)/%.o,$(wildcard syscalls.s/*.S))
-
-LIBOBJ=$(patsubst lib/%.c,$(OBJDIR)/%.o,$(wildcard lib/*.c))
-LIBUGLYOBJ=$(patsubst libugly/%.c,$(OBJDIR)/%.o,$(wildcard libugly/*.c))
-LIBSTDIOOBJ=$(patsubst libstdio/%.c,$(OBJDIR)/%.o,$(wildcard libstdio/*.c))
-LIBCRUFTOBJ=$(patsubst libcruft/%.c,$(OBJDIR)/%.o,$(wildcard libcruft/*.c))
-LIBCRYPTOBJ=$(patsubst libcrypt/%.c,$(OBJDIR)/%.o,$(wildcard libcrypt/*.c))
-LIBSHELLOBJ=$(patsubst libshell/%.c,$(OBJDIR)/%.o,$(wildcard libshell/*.c))
-
-LIBRPCOBJ=$(patsubst librpc/%.c,$(OBJDIR)/%.o,$(wildcard librpc/*.c))
-LIBREGEXOBJ=$(patsubst libregex/%.c,$(OBJDIR)/%.o,$(wildcard libregex/*.c))
-
-include $(ARCH)/Makefile.add
-
-ifeq ($(CFLAGS),-pipe)
-CFLAGS+=-O -fomit-frame-pointer
-endif
-
-ifneq ($(DEBUG),)
-CFLAGS = -g
-COMMENT = :
-endif
-CFLAGS += -Wall -Wno-switch
-
-PWD=$(shell pwd)
-
-.SUFFIXES:
-.SUFFIXES: .S .c
-
-$(OBJDIR):
- mkdir $@
-
-% :: %,v
-
-$(OBJDIR)/%.o: %.S
- $(CROSS)$(CC) -I. -Iinclude $(CFLAGS) -c $< -o $@
-
-$(OBJDIR)/%.o: %.c
- $(CROSS)$(CC) -I. -Iinclude $(CFLAGS) -c $< -o $@
- $(COMMENT) $(CROSS)strip -x -R .comment -R .note $@
-
-DIETLIBC_OBJ = $(SYSCALLOBJ) $(LIBOBJ) $(LIBSTDIOOBJ) $(LIBUGLYOBJ) \
-$(LIBCRUFTOBJ) $(LIBCRYPTOBJ) $(LIBSHELLOBJ) $(LIBREGEXOBJ) \
-$(OBJDIR)/__longjmp.o $(OBJDIR)/setjmp.o $(OBJDIR)/unified.o \
-$(OBJDIR)/mmap.o $(OBJDIR)/clone.o
-
-$(OBJDIR)/dietlibc.a: $(DIETLIBC_OBJ) $(OBJDIR)/start.o
- $(CROSS)ar cru $@ $(DIETLIBC_OBJ)
-
-$(OBJDIR)/librpc.a: $(LIBRPCOBJ)
- $(CROSS)ar cru $@ $(LIBRPCOBJ)
-
-LIBLATIN1_OBJS=$(patsubst liblatin1/%.c,$(OBJDIR)/%.o,$(wildcard liblatin1/*.c))
-$(OBJDIR)/liblatin1.a: $(LIBLATIN1_OBJS)
- $(CROSS)ar cru $@ $^
-
-$(OBJDIR)/libdietc.so: $(OBJDIR)/dietlibc.a
- $(CROSS)ld -whole-archive -shared -o $@ $^
-
-$(SYSCALLOBJ): syscalls.h
-
-$(OBJDIR)/diet: diet.c $(OBJDIR)/start.o $(OBJDIR)/dietlibc.a
- $(CROSS)$(CC) -Iinclude $(CFLAGS) -nostdlib -o $@ $^ -DDIETHOME=\"$(PWD)\"
- $(CROSS)strip -R .comment -R .note $@
-
-$(OBJDIR)/djb: $(OBJDIR)/compile $(OBJDIR)/load
-
-$(OBJDIR)/compile:
- echo 'exec gcc $(CFLAGS) -I$(PWD)/$(OBJDIR)/include -c $${1+"$$@"}' > $@
- chmod 755 $@
-
-$(OBJDIR)/load:
- echo 'main="$$1"; shift; exec gcc -nostdlib -o "$$main" $(PWD)/$(OBJDIR)/start.o "$$main".o $${1+"$$@"} $(PWD)/$(OBJDIR)/dietlibc.a -lgcc' > $@
- chmod 755 $@
-
-clean:
- rm -f *.o *.a t t1 compile load exports mapfile libdietc.so
- rm -rf bin-*
-
-tar: clean
- rm -f armv4l
- ln -sf arm armv4l
- cd ..; tar cvvf dietlibc.tar.bz2 dietlibc --use=bzip2 --exclude CVS
-
-$(OBJDIR)/exports: $(OBJDIR)/dietlibc.a
- nm -g $(OBJDIR)/dietlibc.a | grep -w T | awk '{ print $$3 }' | sort -u > $(OBJDIR)/exports
-
-.PHONY: t t1
-t:
- $(CROSS)$(CC) -g $(CFLAGS) -fno-builtin -nostdlib -Iinclude -o t t.c $(OBJDIR)/start.o $(OBJDIR)/dietlibc.a -lgcc -Wl,-Map,mapfile
-
-t1:
- $(CROSS)$(CC) -g -o t1 t.c
-
-install: $(OBJDIR)/start.o $(OBJDIR)/dietlibc.a $(OBJDIR)/liblatin1.a $(OBJDIR)/diet
- cp $(OBJDIR)/start.o $(INSTALLPREFIX)$(prefix)/lib/dietstart.o
- cp $(OBJDIR)/dietlibc.a $(INSTALLPREFIX)$(prefix)/lib/libdietc.a
- cp $(OBJDIR)/liblatin1.a $(INSTALLPREFIX)$(prefix)/lib/libdietlatin1.a
- cp $(OBJDIR)/diet $(INSTALLPREFIX)$(prefix)/bin/diet
-
-.PHONY: sparc ppc mips arm alpha i386
-
-arm sparc ppc alpha i386:
- $(MAKE) ARCH=$@ CROSS=$@-linux- all t bin-$@/libdietc.so
-
-mips:
- $(MAKE) ARCH=$@ CROSS=$@-linux-gnu- all t bin-$@/libdietc.so
-
-cross:
- $(MAKE) arm sparc ppc alpha i386 mips
-
-
-# these depend on dietfeatures.h for large file backward compatibility
-$(OBJDIR)/__fstat64.o $(OBJDIR)/__lstat64.o $(OBJDIR)/__stat64.o: dietfeatures.h
-
-# these depend on dietfeatures.h for thread support
-$(OBJDIR)/alloc.o $(OBJDIR)/perror.o $(OBJDIR)/logging.o $(OBJDIR)/unified.o: dietfeatures.h
-
-# these depend on dietfeatures.h for linker warnings
-$(OBJDIR)/assert_fail.o $(OBJDIR)/sprintf.o $(OBJDIR)/vsnprintf.o $(OBJDIR)/___div.o $(OBJDIR)/fflush.o $(OBJDIR)/setvbuf.o $(OBJDIR)/system.o $(OBJDIR)/sendfile.o $(OBJDIR)/setenv.o: dietfeatures.h
-
-# these depend on dietfeatures.h for buffered stdio
-fclose.o $(OBJDIR)/fdglue.o $(OBJDIR)/fflush.o $(OBJDIR)/fgetc.o $(OBJDIR)/fputc.o $(OBJDIR)/fread.o $(OBJDIR)/fseek.o $(OBJDIR)/printf.o $(OBJDIR)/setvbuf.o $(OBJDIR)/stderr.o $(OBJDIR)/stdin.o $(OBJDIR)/stdout.o $(OBJDIR)/fwrite.o $(OBJDIR)/puts.o: dietfeatures.h
-
-# these depend on dietfeatures.h for fast string routines
-strcasecmp.o $(OBJDIR)/strcat.o $(OBJDIR)/strchr.o $(OBJDIR)/strcmp.o $(OBJDIR)/strcpy.o $(OBJDIR)/strlen.o $(OBJDIR)/strncasecmp.o $(OBJDIR)/strncat.o $(OBJDIR)/strrchr.o: dietfeatures.h
-
-# these depend on dietfeatures.h for /proc
-$(OBJDIR)/tty.o: dietfeatures.h
-
-# these depend on dietfeatures.h for ungetc support ;-)
-$(OBJDIR)/ungetc.o: dietfeatures.h
-
-# these depend on dietfeatures.h for WANT_TZFILE_PARSER
-$(OBJDIR)/localtime_r.o: dietfeatures.h
diff --git a/mdk-stage1/dietlibc/README b/mdk-stage1/dietlibc/README
deleted file mode 100644
index ce9838832..000000000
--- a/mdk-stage1/dietlibc/README
+++ /dev/null
@@ -1,43 +0,0 @@
-diet libc to statically link programs that don't need all the bloat
-from glibc.
-
-malloc, printf and scanf contributed from Olaf Dreesen.
-
-To compile:
-
- $ make
-
-make should compile the diet libc itself without warnings. In addition
-to the diet libc, the default make target includes t, which is a test
-program and probably contains code which produces warnings. You can
-safely ignore them.
-
-When make is done, it will have created dietlibc.a in bin-i386 (or
-bin-ppc, bin-alpha, bin-sparc, bin-ppc or bin-arm, depending on your
-architecture). In that directory you will also find a program called
-"diet", which you need to copy in a directory in your $PATH:
-
- # install bin-i386/diet /usr/local/bin
-
-Then you can compile programs by prepending diet to the command line,
-i.e.
-
- $ diet gcc -s -Os -pipe -o t t.c
-
-diet is cross-compiler friendly and can also be used like this:
-
- $ diet sparc-linux-gcc -o t t.c
-
-diet will then link against dietlibc.a from bin-sparc, of course.
-diet comes with a man page (diet.1), which you can copy to an
-appropriate location, too:
-
- # cp diet.1 /usr/local/man/man1
-
-After you compiled the diet libc successfully, I invite you to check out
-the embedded utils (http://www.fefe.de/embutils/) and the diet libc
-binary repository (ftp://foobar.math.fu-berlin.de/pub/dietlibc/), too.
-The embedded utils are small replacements for common utilities like mv,
-chown, ls, and even a small tar that can extract tar files. The binary
-repository contains a few utilities I linked against the diet libc, for
-example gzip, bzip2 and fdisk.
diff --git a/mdk-stage1/dietlibc/alpha/Makefile.add b/mdk-stage1/dietlibc/alpha/Makefile.add
deleted file mode 100644
index 10ff0faef..000000000
--- a/mdk-stage1/dietlibc/alpha/Makefile.add
+++ /dev/null
@@ -1,5 +0,0 @@
-
-CFLAGS+=-Os -Iinclude -fomit-frame-pointer -fstrict-aliasing
-VPATH:=alpha:syscalls.s:$(VPATH)
-
-LIBOBJ+=$(patsubst %,$(OBJDIR)/%,divq.o divl.o remq.o reml.o seteuid.o __time.o)
diff --git a/mdk-stage1/dietlibc/alpha/__longjmp.S b/mdk-stage1/dietlibc/alpha/__longjmp.S
deleted file mode 100644
index d86d76717..000000000
--- a/mdk-stage1/dietlibc/alpha/__longjmp.S
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifdef __alpha__
-
-#include <setjmp.h>
-
-.text
-.align 2
-
-.global __longjmp
-__longjmp:
- mov $17, $0 /* a1 -> v0 */
-
- ldq $9, (JB_S0*8) ($16) /* s0 */
- ldq $10, (JB_S1*8) ($16) /* s1 */
- ldq $11, (JB_S2*8) ($16) /* s2 */
- ldq $12, (JB_S3*8) ($16) /* s3 */
- ldq $13, (JB_S4*8) ($16) /* s4 */
- ldq $14, (JB_S5*8) ($16) /* s5 */
-
- ldq $26, (JB_PC*8) ($16) /* ra */
- ldq $fp, (JB_FP*8) ($16) /* fp */
- ldq $1, (JB_SP*8) ($16) /* sp */
-
- ldt $f2, (JB_F2*8) ($16) /* f2 */
- ldt $f3, (JB_F3*8) ($16) /* f3 */
- ldt $f4, (JB_F4*8) ($16) /* f4 */
- ldt $f5, (JB_F5*8) ($16) /* f5 */
- ldt $f6, (JB_F6*8) ($16) /* f6 */
- ldt $f7, (JB_F7*8) ($16) /* f7 */
- ldt $f8, (JB_F8*8) ($16) /* f8 */
- ldt $f9, (JB_F9*8) ($16) /* f9 */
-
- cmoveq $0, 0x1, $0
- mov $1, $sp
-
- ret $31, ($26), 1
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/alpha/__time.c b/mdk-stage1/dietlibc/alpha/__time.c
deleted file mode 100644
index 07275e0e3..000000000
--- a/mdk-stage1/dietlibc/alpha/__time.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <time.h>
-#include <sys/time.h>
-
-time_t time(time_t *foo) {
- struct timeval tv;
- time_t tmp=(time_t)-1;
- if (gettimeofday(&tv,0)==0)
- tmp=(time_t)tv.tv_sec;
- if (foo) *foo=tmp;
- return tmp;
-}
diff --git a/mdk-stage1/dietlibc/alpha/accept.S b/mdk-stage1/dietlibc/alpha/accept.S
deleted file mode 100644
index 459c45d7a..000000000
--- a/mdk-stage1/dietlibc/alpha/accept.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(accept,accept,__libc_accept)
diff --git a/mdk-stage1/dietlibc/alpha/bind.S b/mdk-stage1/dietlibc/alpha/bind.S
deleted file mode 100644
index 86a04cb70..000000000
--- a/mdk-stage1/dietlibc/alpha/bind.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(bind,bind)
diff --git a/mdk-stage1/dietlibc/alpha/clone.S b/mdk-stage1/dietlibc/alpha/clone.S
deleted file mode 100644
index b7e32d707..000000000
--- a/mdk-stage1/dietlibc/alpha/clone.S
+++ /dev/null
@@ -1,42 +0,0 @@
-#include "syscalls.h"
-#include <asm/errno.h>
-
-.text
-.align 2
-.weak clone
-clone:
-.global __clone
-.type __clone,@function
-__clone:
- ldiq $0, EINVAL
- beq $16, .Lerror
- beq $17, .Lerror
-
- subq $17, 16, $17
- stq $16, 0($17)
- stq $19, 8($17)
- mov $18, $16
-
- lda $0, __NR_clone($31)
- callsys
- bne $19, .Lerror
-
- beq $0, .Lstart_thread
-
- ret $31, ($26), 0x01
-
-.Lerror:
- jmp error_unified_syscall
-
-.Lstart_thread:
- clr $fp
-
- ldq $27, 0($sp)
- ldq $16, 8($sp)
-
- jsr $26, ($27), 0x04
-
- ldgp $gp, 0($26)
- mov $0, $16
- jsr $26, exit
-
diff --git a/mdk-stage1/dietlibc/alpha/connect.S b/mdk-stage1/dietlibc/alpha/connect.S
deleted file mode 100644
index c191ca808..000000000
--- a/mdk-stage1/dietlibc/alpha/connect.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(connect,connect,__libc_connect)
diff --git a/mdk-stage1/dietlibc/alpha/divl.S b/mdk-stage1/dietlibc/alpha/divl.S
deleted file mode 100644
index 3af22a5e8..000000000
--- a/mdk-stage1/dietlibc/alpha/divl.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* taken from glibc 2.2 */
-
- .set noreorder
- .set noat
-
- .ent __divlu
- .globl __divlu
-
- .align 3
-__divlu :
- lda $30 , - 48 ($30 )
- .frame $30 , 48 , $23 , 0
- .prologue 0
-.Ludiv:
- stq $1 , 0($30 )
- zapnot $25 ,15, $1
- stq $2 , 8($30 )
- zapnot $24 ,15, $2
- stq $0 , 16($30 )
- clr $27
- stq $3 , 24($30 )
- ldiq $0 , 1
- stq $4 ,32($30 )
- beq $1 , .Ldivbyzero
-
- .align 3
-
-
-1: cmpult $1 , $2 , $at
- s8addq $1 , $31 , $1
- s8addq $0 , $31 , $0
- bne $at , 1b
-
-
-
-3: addq $27 ,$0 , $4
- srl $0 , 1, $0
- cmpule $1 , $2 , $at
- subq $2 , $1 , $3
- cmovne $at ,$4 , $27
- srl $1 , 1, $1
- cmovne $at , $3 , $2
- bne $0 , 3b
-
-.Ldone: ldq $1 , 0($30 )
- ldq $2 , 8($30 )
- ldq $0 , 16($30 )
- ldq $3 , 24($30 )
- ldq $4 ,32($30 )
- lda $30 , 48 ($30 )
- ret $31 , ($23 ), 1
-
-.Ldivbyzero:
- mov $16 , $3
- ldiq $16 , -2
- call_pal 170
- mov $3 , $16
- clr $27
- br .Ldone
-
- .end __divlu
-
- .ent __divl
- .globl __divl
-
- .align 3
-__divl :
- lda $30 , - 48 ($30 )
- .frame $30 , 48 , $23 , 0
- .prologue 0
- or $24 , $25 , $at
- sextl $at , $at
- bge $at , .Ludiv
-
-
- stq $24 , 0($30 )
- negl $24 , $at
- stq $25 , 8($30 )
- cmovge $at , $at , $24
- stq $23 , 16($30 )
- negl $25 , $at
- stq $3 , 24($30 )
- cmovge $at , $at , $25
-
-
- bsr $23 , __divlu
-
-
- ldq $24 , 0($30 )
- ldq $25 , 8($30 )
- xor $24 , $25 , $at
- negl $27 , $3
- sextl $at , $at
- ldq $23 , 16($30 )
- cmovlt $at , $3 , $27
- ldq $3 , 24($30 )
-
- lda $30 , 48 ($30 )
- ret $31 , ($23 ), 1
-
- .end __divl
diff --git a/mdk-stage1/dietlibc/alpha/divq.S b/mdk-stage1/dietlibc/alpha/divq.S
deleted file mode 100644
index cf70862c4..000000000
--- a/mdk-stage1/dietlibc/alpha/divq.S
+++ /dev/null
@@ -1,102 +0,0 @@
-/* taken from glibc 2.2 */
-
- .set noreorder
- .set noat
-
- .ent __divqu
- .globl __divqu
-
- .align 3
-__divqu :
- lda $30 , - 48 ($30 )
- .frame $30 , 48 , $23 , 0
- .prologue 0
-$udiv:
- stq $1 , 0($30 )
- mov $25 , $1
- stq $2 , 8($30 )
- mov $24 , $2
- stq $0 , 16($30 )
- clr $27
- stq $3 , 24($30 )
- ldiq $0 , 1
- stq $4 ,32($30 )
- beq $1 , $divbyzero
-
- .align 3
-
-
-1: cmpult $1 , $2 , $at
- blt $1 , 2f
- addq $1 , $1 , $1
- addq $0 , $0 , $0
- bne $at , 1b
- unop
-2:
-3: addq $27 ,$0 , $4
- srl $0 , 1, $0
- cmpule $1 , $2 , $at
- subq $2 , $1 , $3
- cmovne $at ,$4 , $27
- srl $1 , 1, $1
- cmovne $at , $3 , $2
- bne $0 , 3b
-
-$done: ldq $1 , 0($30 )
- ldq $2 , 8($30 )
- ldq $0 , 16($30 )
- ldq $3 , 24($30 )
- ldq $4 ,32($30 )
- lda $30 , 48 ($30 )
- ret $31 , ($23 ), 1
-
-$divbyzero:
- mov $16 , $3
- ldiq $16 , -2
- call_pal 170
- mov $3 , $16
- clr $27
- br $done
-
- .end __divqu
-
- .ent __divq
- .globl __divq
-
- .align 3
-__divq :
- lda $30 , - 48 ($30 )
- .frame $30 , 48 , $23 , 0
- .prologue 0
- or $24 , $25 , $at
-
- bge $at , $udiv
-
-
- stq $24 , 0($30 )
- negq $24 , $at
- stq $25 , 8($30 )
- cmovge $at , $at , $24
- stq $23 , 16($30 )
- negq $25 , $at
- stq $3 , 24($30 )
- cmovge $at , $at , $25
-
-
- bsr $23 , __divqu
-
-
- ldq $24 , 0($30 )
- ldq $25 , 8($30 )
- xor $24 , $25 , $at
- negq $27 , $3
-
- ldq $23 , 16($30 )
- cmovlt $at , $3 , $27
- ldq $3 , 24($30 )
-
- lda $30 , 48 ($30 )
- ret $31 , ($23 ), 1
-
- .end __divq
-
diff --git a/mdk-stage1/dietlibc/alpha/getegid.S b/mdk-stage1/dietlibc/alpha/getegid.S
deleted file mode 100644
index 89c35d45e..000000000
--- a/mdk-stage1/dietlibc/alpha/getegid.S
+++ /dev/null
@@ -1,11 +0,0 @@
-.text
-.align 2
-.global getegid
-getegid:
- lda $sp,-8($sp)
- stq $26, 0($sp)
- jsr getgid
- ldq $26, 0($sp)
- lda $sp, 8($sp)
- cmovge $0, $20, $0
- ret
diff --git a/mdk-stage1/dietlibc/alpha/geteuid.S b/mdk-stage1/dietlibc/alpha/geteuid.S
deleted file mode 100644
index 087ca7348..000000000
--- a/mdk-stage1/dietlibc/alpha/geteuid.S
+++ /dev/null
@@ -1,11 +0,0 @@
-.text
-.align 2
-.global geteuid
-geteuid:
- lda $sp,-8($sp)
- stq $26, 0($sp)
- jsr getuid
- ldq $26, 0($sp)
- lda $sp, 8($sp)
- cmovge $0, $20, $0
- ret
diff --git a/mdk-stage1/dietlibc/alpha/getgid.S b/mdk-stage1/dietlibc/alpha/getgid.S
deleted file mode 100644
index 7350082f3..000000000
--- a/mdk-stage1/dietlibc/alpha/getgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getxgid,getgid)
diff --git a/mdk-stage1/dietlibc/alpha/getpeername.S b/mdk-stage1/dietlibc/alpha/getpeername.S
deleted file mode 100644
index 3b3f48b1a..000000000
--- a/mdk-stage1/dietlibc/alpha/getpeername.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getpeername,getpeername)
diff --git a/mdk-stage1/dietlibc/alpha/getpid.S b/mdk-stage1/dietlibc/alpha/getpid.S
deleted file mode 100644
index d8b3523b2..000000000
--- a/mdk-stage1/dietlibc/alpha/getpid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getxpid,getpid)
diff --git a/mdk-stage1/dietlibc/alpha/getppid.S b/mdk-stage1/dietlibc/alpha/getppid.S
deleted file mode 100644
index e181268c3..000000000
--- a/mdk-stage1/dietlibc/alpha/getppid.S
+++ /dev/null
@@ -1,11 +0,0 @@
-.text
-.align 2
-.global getppid
-getppid:
- lda $sp,-8($sp)
- stq $26, 0($sp)
- jsr getpid
- ldq $26, 0($sp)
- lda $sp, 8($sp)
- cmovge $0, $20, $0
- ret
diff --git a/mdk-stage1/dietlibc/alpha/getsockname.S b/mdk-stage1/dietlibc/alpha/getsockname.S
deleted file mode 100644
index 2727d88da..000000000
--- a/mdk-stage1/dietlibc/alpha/getsockname.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getsockname,getsockname)
diff --git a/mdk-stage1/dietlibc/alpha/getsockopt.S b/mdk-stage1/dietlibc/alpha/getsockopt.S
deleted file mode 100644
index 44b4a910a..000000000
--- a/mdk-stage1/dietlibc/alpha/getsockopt.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getsockopt,getsockopt)
diff --git a/mdk-stage1/dietlibc/alpha/getuid.S b/mdk-stage1/dietlibc/alpha/getuid.S
deleted file mode 100644
index fcb5570c2..000000000
--- a/mdk-stage1/dietlibc/alpha/getuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getxuid,getuid)
diff --git a/mdk-stage1/dietlibc/alpha/listen.S b/mdk-stage1/dietlibc/alpha/listen.S
deleted file mode 100644
index 1102831d4..000000000
--- a/mdk-stage1/dietlibc/alpha/listen.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(listen,listen)
diff --git a/mdk-stage1/dietlibc/alpha/mmap.S b/mdk-stage1/dietlibc/alpha/mmap.S
deleted file mode 100644
index 2e57fbb74..000000000
--- a/mdk-stage1/dietlibc/alpha/mmap.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mmap,mmap)
diff --git a/mdk-stage1/dietlibc/alpha/msgctl.S b/mdk-stage1/dietlibc/alpha/msgctl.S
deleted file mode 100644
index d7caed2cc..000000000
--- a/mdk-stage1/dietlibc/alpha/msgctl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(msgctl,msgctl)
diff --git a/mdk-stage1/dietlibc/alpha/msgget.S b/mdk-stage1/dietlibc/alpha/msgget.S
deleted file mode 100644
index 518d67ac4..000000000
--- a/mdk-stage1/dietlibc/alpha/msgget.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(msgget,msgget)
diff --git a/mdk-stage1/dietlibc/alpha/msgrcv.S b/mdk-stage1/dietlibc/alpha/msgrcv.S
deleted file mode 100644
index ab62e6c30..000000000
--- a/mdk-stage1/dietlibc/alpha/msgrcv.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(msgrcv,msgrcv)
diff --git a/mdk-stage1/dietlibc/alpha/msgsnd.S b/mdk-stage1/dietlibc/alpha/msgsnd.S
deleted file mode 100644
index 890a996a2..000000000
--- a/mdk-stage1/dietlibc/alpha/msgsnd.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(msgsnd,msgsnd)
diff --git a/mdk-stage1/dietlibc/alpha/pipe.S b/mdk-stage1/dietlibc/alpha/pipe.S
deleted file mode 100644
index 3dfef10bf..000000000
--- a/mdk-stage1/dietlibc/alpha/pipe.S
+++ /dev/null
@@ -1,17 +0,0 @@
-#include "syscalls.h"
-
-.text
-.align 2
-.global pipe
-.type pipe,@function
-pipe:
- lda $0, __NR_pipe($31)
- callsys
- bne $19, .Lerror
- stl $0, 0($16)
- stl $20, 4($16)
- clr $0
- ret $31, ($26), 0x01
-.Lerror:
- br error_unified_syscall
-
diff --git a/mdk-stage1/dietlibc/alpha/recv.S b/mdk-stage1/dietlibc/alpha/recv.S
deleted file mode 100644
index 17664f2e2..000000000
--- a/mdk-stage1/dietlibc/alpha/recv.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(recv,recv,__libc_recv)
diff --git a/mdk-stage1/dietlibc/alpha/recvfrom.S b/mdk-stage1/dietlibc/alpha/recvfrom.S
deleted file mode 100644
index d8e3922af..000000000
--- a/mdk-stage1/dietlibc/alpha/recvfrom.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(recvfrom,recvfrom,__libc_recvfrom)
diff --git a/mdk-stage1/dietlibc/alpha/recvmsg.S b/mdk-stage1/dietlibc/alpha/recvmsg.S
deleted file mode 100644
index 6ce87eebb..000000000
--- a/mdk-stage1/dietlibc/alpha/recvmsg.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(recvmsg,recvmsg)
diff --git a/mdk-stage1/dietlibc/alpha/reml.S b/mdk-stage1/dietlibc/alpha/reml.S
deleted file mode 100644
index 2d89e3280..000000000
--- a/mdk-stage1/dietlibc/alpha/reml.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* taken from glibc 2.2 */
-
- .set noreorder
- .set noat
-
- .ent __remlu
- .globl __remlu
-
- .align 3
-__remlu :
- lda $30 , -32($30)
- .frame $30 , 32 , $23 , 0
- .prologue 0
-.Ludiv:
- stq $1 , 0($30)
- zapnot $25 , 15 , $1
- stq $2 , 8($30)
- zapnot $24 , 15 , $27
- stq $0 , 16($30)
- clr $2
- stq $3 , 24($30)
- ldiq $0 , 1
-
- beq $1 , .Ldivbyzero
-
- .align 3
-
-
-1: cmpult $1 , $27 , $at
- s8addq $1 , $31 , $1
- s8addq $0 , $31 , $0
- bne $at , 1b
-
-
-
-3:
- srl $0 , 1 , $0
- cmpule $1 , $27 , $at
- subq $27 , $1 , $3
-
- srl $1 , 1 , $1
- cmovne $at , $3 , $27
- bne $0 , 3b
-
-.Ldone: ldq $1 , 0($30)
- ldq $2 , 8($30)
- ldq $0 , 16($30)
- ldq $3 , 24($30)
-
- lda $30 , 32($30)
- ret $31 , ($23), 1
-
-.Ldivbyzero:
- mov $16 , $3
- ldiq $16 , -2
- call_pal 170
- mov $3 , $16
- clr $27
- br .Ldone
-
- .end __remlu
-
- .ent __reml
- .globl __reml
-
- .align 3
-__reml :
- lda $30 , - 32 ($30 )
- .frame $30 , 32 , $23 , 0
- .prologue 0
- or $24 , $25 , $at
- sextl $at , $at
- bge $at , .Ludiv
-
-
- stq $24 , 0($30 )
- negl $24 , $at
- stq $25 , 8($30 )
- cmovge $at , $at , $24
- stq $23 , 16($30 )
- negl $25 , $at
- stq $3 , 24($30 )
- cmovge $at , $at , $25
-
-
- bsr $23 , __remlu
-
-
- ldq $24 , 0($30 )
- ldq $25 , 8($30 )
- mov $24 , $at
- negl $27 , $3
- sextl $at , $at
- ldq $23 , 16($30 )
- cmovlt $at , $3 , $27
- ldq $3 , 24($30 )
-
- lda $30 , 32 ($30 )
- ret $31 , ($23 ), 1
-
- .end __reml
diff --git a/mdk-stage1/dietlibc/alpha/remq.S b/mdk-stage1/dietlibc/alpha/remq.S
deleted file mode 100644
index 713484da3..000000000
--- a/mdk-stage1/dietlibc/alpha/remq.S
+++ /dev/null
@@ -1,97 +0,0 @@
-/* taken from glibc 2.2 */
-
- .set noreorder
- .set noat
-
- .ent __remqu
- .globl __remqu
-
- .align 3
-__remqu :
- lda $30 , - 32 ($30 )
- .frame $30 , 32 , $23 , 0
- .prologue 0
-.Ludiv:
- stq $1 , 0($30 )
- mov $25 , $1
- stq $2 , 8($30 )
- mov $24 , $27
- stq $0 , 16($30 )
- clr $2
- stq $3 , 24($30 )
- ldiq $0 , 1
-
- beq $1 , .Ldivbyzero
-
- .align 3
-
-1: cmpult $1 , $27 , $at
- blt $1 , 2f
- addq $1 , $1 , $1
- addq $0 , $0 , $0
- bne $at , 1b
- unop
-2:
-3:
- srl $0 , 1, $0
- cmpule $1 , $27 , $at
- subq $27 , $1 , $3
-
- srl $1 , 1, $1
- cmovne $at , $3 , $27
- bne $0 , 3b
-
-.Ldone: ldq $1 , 0($30 )
- ldq $2 , 8($30 )
- ldq $0 , 16($30 )
- ldq $3 , 24($30 )
-
- lda $30 , 32 ($30 )
- ret $31 , ($23 ), 1
-
-.Ldivbyzero:
- mov $16 , $3
- ldiq $16 , -2
- call_pal 170
- mov $3 , $16
- clr $27
- br .Ldone
-
- .end __remqu
-
- .ent __remq
- .globl __remq
-
- .align 3
-__remq :
- lda $30 , - 32 ($30 )
- .frame $30 , 32 , $23 , 0
- .prologue 0
- or $24 , $25 , $at
-
- bge $at , .Ludiv
-
- stq $24 , 0($30 )
- negq $24 , $at
- stq $25 , 8($30 )
- cmovge $at , $at , $24
- stq $23 , 16($30 )
- negq $25 , $at
- stq $3 , 24($30 )
- cmovge $at , $at , $25
-
- bsr $23 , __remqu
-
- ldq $24 , 0($30 )
- ldq $25 , 8($30 )
- mov $24 , $at
- negq $27 , $3
-
- ldq $23 , 16($30 )
- cmovlt $at , $3 , $27
- ldq $3 , 24($30 )
-
- lda $30 , 32 ($30 )
- ret $31 , ($23 ), 1
-
- .end __remq
diff --git a/mdk-stage1/dietlibc/alpha/semctl.S b/mdk-stage1/dietlibc/alpha/semctl.S
deleted file mode 100644
index e215ed955..000000000
--- a/mdk-stage1/dietlibc/alpha/semctl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(semctl,semctl)
diff --git a/mdk-stage1/dietlibc/alpha/semget.S b/mdk-stage1/dietlibc/alpha/semget.S
deleted file mode 100644
index 67f488546..000000000
--- a/mdk-stage1/dietlibc/alpha/semget.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(semget,semget)
diff --git a/mdk-stage1/dietlibc/alpha/semop.S b/mdk-stage1/dietlibc/alpha/semop.S
deleted file mode 100644
index 81b6fc606..000000000
--- a/mdk-stage1/dietlibc/alpha/semop.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(semop,semop)
diff --git a/mdk-stage1/dietlibc/alpha/send.S b/mdk-stage1/dietlibc/alpha/send.S
deleted file mode 100644
index cfd11be2a..000000000
--- a/mdk-stage1/dietlibc/alpha/send.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(send,send,__libc_send)
diff --git a/mdk-stage1/dietlibc/alpha/sendmsg.S b/mdk-stage1/dietlibc/alpha/sendmsg.S
deleted file mode 100644
index 14646ad68..000000000
--- a/mdk-stage1/dietlibc/alpha/sendmsg.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sendmsg,sendmsg)
diff --git a/mdk-stage1/dietlibc/alpha/sendto.S b/mdk-stage1/dietlibc/alpha/sendto.S
deleted file mode 100644
index 17a033011..000000000
--- a/mdk-stage1/dietlibc/alpha/sendto.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(sendto,sendto,__libc_sendto)
diff --git a/mdk-stage1/dietlibc/alpha/seteuid.c b/mdk-stage1/dietlibc/alpha/seteuid.c
deleted file mode 100644
index a7cf47893..000000000
--- a/mdk-stage1/dietlibc/alpha/seteuid.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <sys/types.h>
-#include <unistd.h>
-
-#undef seteuid
-int seteuid(uid_t euid) {
- return setreuid(-1,euid);
-}
diff --git a/mdk-stage1/dietlibc/alpha/setjmp.S b/mdk-stage1/dietlibc/alpha/setjmp.S
deleted file mode 100644
index 3768056be..000000000
--- a/mdk-stage1/dietlibc/alpha/setjmp.S
+++ /dev/null
@@ -1,46 +0,0 @@
-#include <setjmp.h>
-
-.text
-.global __sigsetjmp
-__sigsetjmp:
- ldgp $gp, 0($gp)
-
- mov $sp, $1
- lda $sp, -16($sp)
-
- stq $26, 0($sp) /* save ra */
-
- stq $9, (JB_S0*8) ($16) /* s0 */
- stq $10, (JB_S1*8) ($16) /* s1 */
- stq $11, (JB_S2*8) ($16) /* s2 */
- stq $12, (JB_S3*8) ($16) /* s3 */
- stq $13, (JB_S4*8) ($16) /* s4 */
- stq $14, (JB_S5*8) ($16) /* s5 */
-
- stq $26, (JB_PC*8) ($16) /* ra */
- stq $fp, (JB_FP*8) ($16) /* fp */
- stq $1, (JB_SP*8) ($16) /* sp */
-
- stt $f2, (JB_F2*8) ($16) /* f2 */
- stt $f3, (JB_F3*8) ($16) /* f3 */
- stt $f4, (JB_F4*8) ($16) /* f4 */
- stt $f5, (JB_F5*8) ($16) /* f5 */
- stt $f6, (JB_F6*8) ($16) /* f6 */
- stt $f7, (JB_F7*8) ($16) /* f7 */
- stt $f8, (JB_F8*8) ($16) /* f8 */
- stt $f9, (JB_F9*8) ($16) /* f9 */
-
- br $26, __sigjmp_save /* call __sigjmp_save */
-
- ldq $26, 0($sp) /* restore ra */
-
- lda $sp, 16($sp)
- ret $31, ($26), 1 /* back to caller */
-
-.weak setjmp
-setjmp:
-.weak __setjmp
-__setjmp:
- ldgp $gp, 0($gp)
- mov 0, $17
- br __sigsetjmp
diff --git a/mdk-stage1/dietlibc/alpha/setsockopt.S b/mdk-stage1/dietlibc/alpha/setsockopt.S
deleted file mode 100644
index e3fe1d321..000000000
--- a/mdk-stage1/dietlibc/alpha/setsockopt.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setsockopt,setsockopt)
diff --git a/mdk-stage1/dietlibc/alpha/shmat.S b/mdk-stage1/dietlibc/alpha/shmat.S
deleted file mode 100644
index 51248173d..000000000
--- a/mdk-stage1/dietlibc/alpha/shmat.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shmat,shmat)
diff --git a/mdk-stage1/dietlibc/alpha/shmctl.S b/mdk-stage1/dietlibc/alpha/shmctl.S
deleted file mode 100644
index d56caace4..000000000
--- a/mdk-stage1/dietlibc/alpha/shmctl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shmctl,shmctl)
diff --git a/mdk-stage1/dietlibc/alpha/shmdt.S b/mdk-stage1/dietlibc/alpha/shmdt.S
deleted file mode 100644
index d9812a799..000000000
--- a/mdk-stage1/dietlibc/alpha/shmdt.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shmdt,shmdt)
diff --git a/mdk-stage1/dietlibc/alpha/shmget.S b/mdk-stage1/dietlibc/alpha/shmget.S
deleted file mode 100644
index 82914223f..000000000
--- a/mdk-stage1/dietlibc/alpha/shmget.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shmget,shmget)
diff --git a/mdk-stage1/dietlibc/alpha/shutdown.S b/mdk-stage1/dietlibc/alpha/shutdown.S
deleted file mode 100644
index 9b5139325..000000000
--- a/mdk-stage1/dietlibc/alpha/shutdown.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(shutdown,shutdown)
diff --git a/mdk-stage1/dietlibc/alpha/signal.S b/mdk-stage1/dietlibc/alpha/signal.S
deleted file mode 100644
index ceca0f02d..000000000
--- a/mdk-stage1/dietlibc/alpha/signal.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(osf_signal,signal)
diff --git a/mdk-stage1/dietlibc/alpha/sigprocmask.S b/mdk-stage1/dietlibc/alpha/sigprocmask.S
deleted file mode 100644
index d9da836c2..000000000
--- a/mdk-stage1/dietlibc/alpha/sigprocmask.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(osf_sigprocmask,sigprocmask,__sigprocmask)
diff --git a/mdk-stage1/dietlibc/alpha/socket.S b/mdk-stage1/dietlibc/alpha/socket.S
deleted file mode 100644
index 85401f56e..000000000
--- a/mdk-stage1/dietlibc/alpha/socket.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(socket,socket)
diff --git a/mdk-stage1/dietlibc/alpha/socketcall.S b/mdk-stage1/dietlibc/alpha/socketcall.S
deleted file mode 100644
index b150bd5d5..000000000
--- a/mdk-stage1/dietlibc/alpha/socketcall.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-/*
- * Doesn't exist on alpha ( accept, bind, ... are SYSCALLS !?! )
- */
diff --git a/mdk-stage1/dietlibc/alpha/start.S b/mdk-stage1/dietlibc/alpha/start.S
deleted file mode 100644
index 00b8e950d..000000000
--- a/mdk-stage1/dietlibc/alpha/start.S
+++ /dev/null
@@ -1,35 +0,0 @@
-#include "start.h"
-
-#ifdef __alpha__
-
-.text
-.align 2
- .set noreorder
-
-.global __start
-__start:
-.global _start
-_start:
- clr $fp /* clear frame pointer */
-
- br $gp,.Lstart /* set global pointer */
-.Lstart:
- ldgp $gp, 0($gp)
-
-/* prepare to call main */
- ldl $16, 0($sp) /* argc */
-
- lda $17, 8($sp) /* argv */
-
- addq $16, 1, $18 /* argp */
- s8addq $18, $17, $18 /* (8*(argc+1))+argv -> argp */
-
- stq $18, environ
-
- mov $0, $21 /* mov v0(dynload) to a5 */
-
- jsr $26, main
- mov $0, $16
- jsr $26, exit /* YES, CALL! for threads and atexit ! (+4 byte) */
-
-#endif
diff --git a/mdk-stage1/dietlibc/alpha/strlen.c b/mdk-stage1/dietlibc/alpha/strlen.c
deleted file mode 100644
index ac532254a..000000000
--- a/mdk-stage1/dietlibc/alpha/strlen.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <string.h>
-
-static const unsigned long long magic = 0x0101010101010101LL;
-
-size_t strlen(const char *s)
-{
- const char *t = s;
- unsigned long long word;
-
- if (!s) return 0;
-
- /* Byte compare up until 64 bit word boundary */
- for (; ((unsigned long long) t & 7); t++)
- if (!*t) return t - s;
-
- /* Word compare */
- do {
- word = *((unsigned long long *) t); t += 8;
- word = (word - magic) &~ word;
- word &= (magic << 7);
- } while (word == 0);
-
- /* word & 0x8080808080808080 == word */
- word = (word - 1) & (magic << 8);
- word += (word << 32);
- word += (word << 16);
- word += (word << 8);
- t += word >> 56;
- return ((const char *) t) - 8 - s;
-}
-
-
diff --git a/mdk-stage1/dietlibc/alpha/time.S b/mdk-stage1/dietlibc/alpha/time.S
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/alpha/time.S
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/alpha/unified.S b/mdk-stage1/dietlibc/alpha/unified.S
deleted file mode 100644
index 02a1c9bcd..000000000
--- a/mdk-stage1/dietlibc/alpha/unified.S
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <dietfeatures.h>
-
-.global __unified_syscall
-__unified_syscall:
- callsys
- bne $19, .Lerror
- ret $31, ($26), 0x01
-
-.Lerror:
-.global error_unified_syscall
-error_unified_syscall:
-#ifdef WANT_THREAD_SAVE
- lda $sp, -16($sp) /* alloc 2 qwords on stack */
- stq $26, 0($sp) /* save ra to stack */
- stq $0, 8($sp) /* save v0 to stack */
-
- jsr $26, __errno_location /* call __errno_location */
-
- ldq $1, 8($sp) /* write old v0 to errno */
- stl $1, 0($0)
-
- lda $0, -1($31) /* new return value is -1 */
- ldq $26, 0($sp) /* restore return address */
- lda $sp, 16($sp) /* free 2 qwords on stack */
-#else
- lda $1, errno
- stl $0, 0($1)
-#endif
- ret $31, ($26), 0x01 /* return */
diff --git a/mdk-stage1/dietlibc/alpha/utime.S b/mdk-stage1/dietlibc/alpha/utime.S
deleted file mode 100644
index a9a8aada6..000000000
--- a/mdk-stage1/dietlibc/alpha/utime.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(utimes,utime)
diff --git a/mdk-stage1/dietlibc/alpha/waitpid.S b/mdk-stage1/dietlibc/alpha/waitpid.S
deleted file mode 100644
index 6dc1c99db..000000000
--- a/mdk-stage1/dietlibc/alpha/waitpid.S
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <syscalls.h>
-
-.text
-.align 2
-.weak waitpid
-waitpid:
-.global __libc_waitpid
-__libc_waitpid:
- clr $19
- br wait4
diff --git a/mdk-stage1/dietlibc/diet.c b/mdk-stage1/dietlibc/diet.c
deleted file mode 100644
index 1de6befc8..000000000
--- a/mdk-stage1/dietlibc/diet.c
+++ /dev/null
@@ -1,112 +0,0 @@
-#include <string.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-/* goal:
- * when invoked as
- * "diet gcc -c t.c"
- * exec
- * "gcc -I/path/to/dietlibc/include -c t.c"
- *
- * when invoked as
- * "diet sparc-linux-gcc -o t t.o"
- * exec
- * "sparc-linux-gcc -nostdlib -static -o t t.o /path/to/dietlibc/bin-sparc/start.o /path/to/dietlibc/bin-sparc/dietlibc.a"
-*/
-
-void error(const char *message) {
- write(2,message,strlen(message));
- exit(1);
-}
-
-int main(int argc,char *argv[]) {
- int link=0;
- int compile=0;
- char diethome[]=DIETHOME;
- char platform[1000]=DIETHOME "/bin-";
- char *nostdlib="-nostdlib";
- char *libgcc="-lgcc";
- char dashL[1000]="-L";
- int i;
-
- if (argc<2) {
- error("usage: diet [gcc command line]\n"
- "e.g. diet gcc -c t.c\n"
- "or diet sparc-linux-gcc -o foo foo.c bar.o\n");
- }
- {
- char *tmp=strchr(argv[1],0)-2;
- char *tmp2;
- char *cc=argv[1];
- if (tmp<cc) goto donttouch;
- if ((tmp2=strchr(cc,'-'))) { /* cross compiling? */
- int len=strlen(platform);
- if (tmp2-cc>90) error("platform name too long!\n");
- memmove(platform+len,argv[1],tmp2-cc);
- platform[tmp2-cc+len]=0;
-/* printf("found platform %s\n",platform); */
- } else {
-#ifdef __sparc__
- strcat(platform,"sparc");
-#endif
-#ifdef __ppc__
- strcat(platform,"ppc");
-#endif
-#ifdef __i386__
- strcat(platform,"i386");
-#endif
-#ifdef __alpha__
- strcat(platform,"alpha");
-#endif
-#ifdef __arm__
- strcat(platform,"arm");
-#endif
-#ifdef __mips__
- strcat(platform,"mips");
-#endif
- }
- strcat(dashL,platform);
- if (!strcmp(tmp,"cc")) {
- char **newargv;
- char **dest;
- char *a,*b,*c;
-/* we need to add -I... if the command line contains -c, -S or -E */
- for (i=2; i<argc; ++i)
- if (!strcmp(argv[i],"-c") || !strcmp(argv[i],"-S") || !strcmp(argv[i],"-E"))
- compile=1;
-/* we need to add -nostdlib if we are not compiling*/
- link=!compile;
-#if 0
- for (i=2; i<argc; ++i)
- if (!strcmp(argv[i],"-o"))
- if (!compile) link=1;
-#endif
- newargv=alloca(sizeof(char*)*(argc+6));
- a=alloca(strlen(diethome)+20);
- b=alloca(strlen(platform)+20);
- c=alloca(strlen(platform)+20);
-
- strcpy(a,"-I"); strcat(a,diethome); strcat(a,"/include");
- strcpy(b,platform); strcat(b,"/start.o");
- strcpy(c,platform); strcat(c,"/dietlibc.a");
-
- dest=newargv;
- *dest++=argv[1];
- if (link) { *dest++=nostdlib; *dest++=dashL; }
- if (compile || link) *dest++=a;
- for (i=2; i<argc; ++i)
- *dest++=argv[i];
- if (link) { *dest++=b; *dest++=c; *dest++=libgcc; }
- *dest=0;
- execvp(newargv[0],newargv);
- goto error;
- } else if (!strcmp(tmp,"ld")) {
- }
- }
-donttouch:
- execvp(argv[1],argv+1);
-error:
- error("execvp failed!\n");
- return 1;
-}
diff --git a/mdk-stage1/dietlibc/dietdirent.h b/mdk-stage1/dietlibc/dietdirent.h
deleted file mode 100644
index d732cf7dc..000000000
--- a/mdk-stage1/dietlibc/dietdirent.h
+++ /dev/null
@@ -1,6 +0,0 @@
-struct __dirstream {
- int fd;
- char buf[1024];
- unsigned int num;
- unsigned int cur;
-}; /* stream data from opendir() */
diff --git a/mdk-stage1/dietlibc/dietfeatures.h b/mdk-stage1/dietlibc/dietfeatures.h
deleted file mode 100644
index e1de38577..000000000
--- a/mdk-stage1/dietlibc/dietfeatures.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _DIETFEATURES_H
-#define _DIETFEATURES_H
-
-/* feel free to comment some of these out to reduce code size */
-
-//#define WANT_FLOATING_POINT_IN_PRINTF
-//#define WANT_FLOATING_POINT_IN_SCANF
-#define WANT_CHARACTER_CLASSES_IN_SCANF
-#define WANT_NULL_PRINTF
-
-#define SLASH_PROC_OK
-
-// #define WANT_BUFFERED_STDIO
-
-/* use errno_location instead of errno */
-// #define WANT_THREAD_SAFE
-
-/* make the startcode, etc. dynamic aware */
-/* #undef WANT_DYNAMIC */
-
-/* do you want smaller or faster string routines? */
-/* #define WANT_FASTER_STRING_ROUTINES */
-
-/* do you want ungetc? makes fgetc more complex */
-#define WANT_UNGETC
-
-// #define WANT_LINKER_WARNINGS
-
-/* you need to define this if you want to run your programs with large
- * file support on kernel 2.2 or 2.4 */
-// #define WANT_LARGEFILE_BACKCOMPAT
-
-/* do you want localtime(3) to read /etc/localtime?
- * Needed for daylight saving time etc. */
-// #define WANT_TZFILE_PARSER
-
-/* stop uncommenting here ;-) */
-#ifndef WANT_FASTER_STRING_ROUTINES
-#define WANT_SMALL_STRING_ROUTINES
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/dietstdarg.h b/mdk-stage1/dietlibc/dietstdarg.h
deleted file mode 100644
index 827671b22..000000000
--- a/mdk-stage1/dietlibc/dietstdarg.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <stdarg.h>
-
-/* this assumes that va_copy() will be a macro, it is on gcc */
-#ifndef va_copy
-# ifdef __va_copy
-# define va_copy(x, y) __va_copy(x, y)
-# else
-/* assume copying it works... */
-# define va_copy(x, y) x = y
-# endif
-#endif
-
diff --git a/mdk-stage1/dietlibc/dietstdio.h b/mdk-stage1/dietlibc/dietstdio.h
deleted file mode 100644
index a1cbeba83..000000000
--- a/mdk-stage1/dietlibc/dietstdio.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* diet stdio -- no buffering ;-} */
-
-#include "dietfeatures.h"
-#include <sys/types.h>
-#ifdef WANT_THREAD_SAVE
-#include <pthread.h>
-#endif
-
-#define BUFSIZE 128
-
-typedef struct __file {
- int fd;
- int flags;
-#ifdef WANT_BUFFERED_STDIO
- unsigned int bs; /* read: bytes in buffer */
- unsigned int bm; /* position in buffer */
- char buf[BUFSIZE];
- struct __file *next; /* for fflush */
-#endif
- pid_t popen_kludge;
-#ifdef WANT_UNGETC
- char ungetbuf;
- char ungotten;
-#endif
-#ifdef WANT_THREAD_SAVE
- pthread_mutex_t m;
-#endif
-} FILE;
-
-extern FILE *__stdio_root;
-
-#define ERRORINDICATOR 1
-#define EOFINDICATOR 2
-#define BUFINPUT 4
-#define BUFLINEWISE 8
-#define NOBUF 16
-#define UNSEEKABLE 32
-
-#define _IONBF 0
-#define _IOLBF 1
-#define _IOFBF 2
-
-/* internal function to flush buffer.
- * However, if next is BUFINPUT and the buffer is an input buffer, it
- * will not be flushed. Vice versa for output */
-extern int __fflush4(FILE *stream,int next);
-
-FILE *fopen (const char *path, const char *mode);
-FILE *fdopen (int fildes, const char *mode);
-FILE *freopen (const char *path, const char *mode, FILE *stream);
-
-int fgetc(FILE *stream);
-char *fgets(char *s, int size, FILE *stream);
-int getc(FILE *stream);
-int getchar(void);
-char *gets(char *s);
-int ungetc(int c, FILE *stream);
-
-int fputc(int c, FILE *stream);
-int fputs(const char *s, FILE *stream);
-int putc(int c, FILE *stream);
-int putchar(int c);
-int puts(const char *s);
-
-long fseek( FILE *stream, long offset, int whence);
-long ftell( FILE *stream);
-void rewind( FILE *stream);
-int fgetpos( FILE *stream, fpos_t *pos);
-int fsetpos( FILE *stream, fpos_t *pos);
-
-size_t fread( void *ptr, size_t size, size_t nmemb, FILE *stream);
-
-size_t fwrite( const void *ptr, size_t size, size_t nmemb, FILE *stream);
-
-int fflush(FILE *stream);
-
-int fclose(FILE *stream);
-
-extern FILE *stdout, *stderr, *stdin;
-
-#define EOF (int)(-1)
diff --git a/mdk-stage1/dietlibc/dietwarning.h b/mdk-stage1/dietlibc/dietwarning.h
deleted file mode 100644
index f7c67a175..000000000
--- a/mdk-stage1/dietlibc/dietwarning.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LINKER_WARNINGS
-
-#ifndef __ASSEMBLER__
-
-#define link_warning(symbol,msg) \
- asm (".section .gnu.warning." symbol "\n\t.string \"" msg "\"\n\t.previous");
-
-#else
-
-#define link_warning(symbol,msg) \
- .section .gnu.warning.##symbol ;\
- .string msg ;\
- .previous
-
-#endif
-
-#else
-
-#define link_warning(foo,bar)
-
-#endif
diff --git a/mdk-stage1/dietlibc/dirstream.h b/mdk-stage1/dietlibc/dirstream.h
deleted file mode 100644
index dc8fba79c..000000000
--- a/mdk-stage1/dietlibc/dirstream.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* Copyright (C) 1991, 1992 Free Software Foundation, Inc.
-This file is part of the GNU C Library.
-
-The GNU C Library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Library General Public License as
-published by the Free Software Foundation; either version 2 of the
-License, or (at your option) any later version.
-
-The GNU C Library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-Library General Public License for more details.
-
-You should have received a copy of the GNU Library General Public
-License along with the GNU C Library; see the file COPYING.LIB. If
-not, write to the, 1992 Free Software Foundation, Inc., 675 Mass Ave,
-Cambridge, MA 02139, USA. */
-
-/*
- * POSIX Standard: 5.1.2 Directory Operations <dirent.h>
- */
-
-#ifndef _DIRSTREAM_H
-
-#define _DIRSTREAM_H 1
-
-#include <sys/types.h>
-#include <dirent.h>
-#ifdef _POSIX_THREADS
-#include <pthread.h>
-#endif
-
-/* For now, syscall readdir () only supports one entry at a time. It
- * will be changed in the future.
-#define NUMENT 3
-*/
-#ifndef NUMENT
-#define NUMENT 1
-#endif
-
-#define SINGLE_READDIR 11
-#define MULTI_READDIR 12
-#define NEW_READDIR 13
-
-/* Directory stream type. */
-struct __dirstream {
- /* file descriptor */
- int dd_fd;
-
- /* offset of the next dir entry in buffer */
- off_t dd_nextloc;
-
- /* bytes of valid entries in buffer */
- size_t dd_size;
-
- /* -> directory buffer */
- struct dirent *dd_buf;
-
- /* we have to convert */
- struct dirent convbuf;
-
- /* offset of the next dir entry in directory. */
- off_t dd_nextoff;
-
- /* total size of buffer */
- size_t dd_max;
-
- enum {unknown, have_getdents, no_getdents} dd_getdents;
-
- /* lock */
-#ifdef _POSIX_THREADS
- pthread_mutex_t *dd_lock;
-#else
- void *dd_lock;
-#endif
-}; /* stream data from opendir() */
-
-#endif /* dirent.h */
diff --git a/mdk-stage1/dietlibc/i386/Makefile.add b/mdk-stage1/dietlibc/i386/Makefile.add
deleted file mode 100644
index b685cc360..000000000
--- a/mdk-stage1/dietlibc/i386/Makefile.add
+++ /dev/null
@@ -1,3 +0,0 @@
-
-CFLAGS+=-march=i386 -mcpu=i386 -Os -fomit-frame-pointer
-VPATH:=i386:syscalls.s:$(VPATH)
diff --git a/mdk-stage1/dietlibc/i386/__longjmp.S b/mdk-stage1/dietlibc/i386/__longjmp.S
deleted file mode 100644
index 098275037..000000000
--- a/mdk-stage1/dietlibc/i386/__longjmp.S
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <setjmp.h>
-
-.text
-.global __longjmp
-__longjmp:
- movl 4(%esp), %ecx /* User's jmp_buf in %ecx. */
- movl 8(%esp), %eax /* Second argument is return value. */
- /* Save the return address now. */
- movl (JB_PC*4)(%ecx), %edx
- /* Restore registers. */
- movl (JB_BX*4)(%ecx), %ebx
- movl (JB_SI*4)(%ecx), %esi
- movl (JB_DI*4)(%ecx), %edi
- movl (JB_BP*4)(%ecx), %ebp
- movl (JB_SP*4)(%ecx), %esp
- /* Jump to saved PC. */
- jmp *%edx
-.size __longjmp,.-__longjmp;
diff --git a/mdk-stage1/dietlibc/i386/__testandset.S b/mdk-stage1/dietlibc/i386/__testandset.S
deleted file mode 100644
index af7b4d5a0..000000000
--- a/mdk-stage1/dietlibc/i386/__testandset.S
+++ /dev/null
@@ -1,8 +0,0 @@
-.text
-.global __testandset
-__testandset:
- xorl %eax, %eax
- movl 0x4(%esp),%edx
- incl %eax
- xchgl %eax,(%edx)
- ret
diff --git a/mdk-stage1/dietlibc/i386/clone.S b/mdk-stage1/dietlibc/i386/clone.S
deleted file mode 100644
index ac02eb468..000000000
--- a/mdk-stage1/dietlibc/i386/clone.S
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <asm/unistd.h>
-
-.text
-.weak clone
-clone:
-.global __clone
-__clone:
- movl 4(%esp), %ecx /* have non null thread_funcion */
- testl %ecx, %ecx
- je .Lclone_error
-
- movl 8(%esp), %ecx /* have non null child_stack pointer */
- testl %ecx, %ecx
- je .Lclone_error
-
- /* put the parameter on thread stack */
- subl $8, %ecx
-
- movl 16(%esp), %eax /* arg */
- movl %eax, 4(%ecx)
-
- movl 4(%esp), %eax /* thread_func */
- movl %eax, 0(%ecx)
-
- /* the syscall */
- pushl %ebx
- movl 16(%esp), %ebx /* flags */
- movl $__NR_clone, %eax
- int $0x80
- popl %ebx
-
- testl %eax, %eax
- jl .Lclone_error
- je .Lstart_thread
- ret
-
-.Lstart_thread:
- xorl %ebp,%ebp
- call *%ebx
- pushl %eax
- call _exit
-
-.Lclone_error:
- negl %eax
- pushl %eax
- call __errno_location
- popl %ecx
- movl %ecx, (%eax)
- xorl %eax, %eax
- decl %eax
- ret
diff --git a/mdk-stage1/dietlibc/i386/mmap.c b/mdk-stage1/dietlibc/i386/mmap.c
deleted file mode 100644
index 26ecb55c0..000000000
--- a/mdk-stage1/dietlibc/i386/mmap.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <linux/types.h>
-#include <linux/unistd.h>
-
-#define __NR__mmap __NR_mmap
-_syscall1(int,_mmap,unsigned long *,buffer)
-
-char *mmap(char *addr, size_t len, int prot, int flags, int fd, unsigned long off) {
- unsigned long buffer[6];
- buffer[0] = (unsigned long)addr;
- buffer[1] = (unsigned long)len;
- buffer[2] = (unsigned long)prot;
- buffer[3] = (unsigned long)flags;
- buffer[4] = (unsigned long)fd;
- buffer[5] = (unsigned long)off;
- return (char*) _mmap(buffer);
-}
diff --git a/mdk-stage1/dietlibc/i386/select.S b/mdk-stage1/dietlibc/i386/select.S
deleted file mode 100644
index 9e7066eae..000000000
--- a/mdk-stage1/dietlibc/i386/select.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(_newselect,select,__libc_select)
diff --git a/mdk-stage1/dietlibc/i386/setjmp.S b/mdk-stage1/dietlibc/i386/setjmp.S
deleted file mode 100644
index 9bfecf565..000000000
--- a/mdk-stage1/dietlibc/i386/setjmp.S
+++ /dev/null
@@ -1,62 +0,0 @@
-#include <setjmp.h>
-
-/* setjmp for i386.
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-.section .rodata
-.text
-.weak setjmp
-setjmp:
-.globl __setjmp
-__setjmp:
- popl %eax /* Pop return address. */
- popl %ecx /* Pop jmp_buf. */
- pushl $0 /* Push zero argument. */
- pushl %ecx /* Push jmp_buf. */
- pushl %eax /* Push back return address. */
-
-.globl __sigsetjmp
-__sigsetjmp:
- movl 4(%esp), %eax /* User's jmp_buf in %eax. */
- /* Save registers. */
- movl %ebx, (JB_BX*4)(%eax)
- movl %esi, (JB_SI*4)(%eax)
- movl %edi, (JB_DI*4)(%eax)
- movl %ebp, (JB_BP*4)(%eax)
- leal 4(%esp), %ecx /* Save SP as it will be after we return. */
- movl %ecx, (JB_SP*4)(%eax)
- movl 0(%esp), %ecx /* Save PC we are returning to now. */
- movl %ecx, (JB_PC*4)(%eax)
-
- /* Make a tail call to __sigjmp_save; it takes the same args. */
-#ifdef PIC
- /* We cannot use the PLT, because it requires that %ebx be set, but
- we can't save and restore our caller's value. Instead, we do an
- indirect jump through the GOT, using for the temporary register
- %ecx, which is call-clobbered. */
- call L(here)
-L(here):
- popl %ecx
- addl $_GLOBAL_OFFSET_TABLE_+[.-L(here)], %ecx
- movl C_SYMBOL_NAME(__sigjmp_save@GOT)(%ecx), %ecx
- jmp *%ecx
-#else
- jmp __sigjmp_save
-#endif
-.size __sigsetjmp,.-__sigsetjmp;
diff --git a/mdk-stage1/dietlibc/i386/start.S b/mdk-stage1/dietlibc/i386/start.S
deleted file mode 100644
index 167bb779c..000000000
--- a/mdk-stage1/dietlibc/i386/start.S
+++ /dev/null
@@ -1,42 +0,0 @@
-#include "start.h"
-
-#ifdef __i386__
-.text
-.globl _start
-_start:
-#if 0
- popl %ecx
- movl %esp, %esi
- leal 4(%esp,%ecx,4),%eax
-#else
- movl (%esp),%ecx /* %ecx = argc */
- leal 4(%esp),%esi /* %esi = argv */
-
- leal 4(%esi,%ecx,4),%eax /* eax = 4*ecx+4 = envp */
-#endif
- pushl %eax
- pushl %esi
- pushl %ecx
- movl %eax,environ
-
-#ifdef WANT_DYNAMIC
-/* in %edx we have the dynamic _fini ( register this if non null ) */
- test %edx, %edx
- je .Linit
- push %edx
- call atexit
- pop %edx
-.Linit:
- call _init
- push $_fini
- call atexit
- pop %edx
-#endif
-
- call main
- pushl %eax
- call exit
-.Lfefe:
- .size _start,.Lfefe-_start
-#endif
-
diff --git a/mdk-stage1/dietlibc/i386/unified.S b/mdk-stage1/dietlibc/i386/unified.S
deleted file mode 100644
index f182bdb4b..000000000
--- a/mdk-stage1/dietlibc/i386/unified.S
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <dietfeatures.h>
-
-.text
-.global __unified_syscall
-__unified_syscall:
- movzbl %al, %eax
- push %edi
- push %esi
- push %ebx
- movl %esp,%edi
- movl 0x10(%edi),%ebx
- movl 0x14(%edi),%ecx
- movl 0x18(%edi),%edx
- movl 0x1c(%edi),%esi
- movl 0x20(%edi),%edi
- int $0x80
- cmp $-124,%eax
- jbe .Lnoerror
-#ifdef WANT_THREAD_SAVE
- movl %eax,%ebx
- call __errno_location
- neg %ebx
- movl %ebx,(%eax)
-#else
- neg %eax
- mov %eax,errno
-#endif
- xor %eax,%eax
- dec %eax
-.Lnoerror:
- pop %ebx
- pop %esi
- pop %edi
- ret
diff --git a/mdk-stage1/dietlibc/include/alloca.h b/mdk-stage1/dietlibc/include/alloca.h
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/include/alloca.h
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/include/arpa/inet.h b/mdk-stage1/dietlibc/include/arpa/inet.h
deleted file mode 100644
index 6d5a6dc35..000000000
--- a/mdk-stage1/dietlibc/include/arpa/inet.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ARPA_INET_H
-#define _ARPA_INET_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <netinet/in.h>
-
-int inet_aton(const char *cp, struct in_addr *inp) __THROW;
-unsigned long int inet_addr(const char *cp) __THROW;
-unsigned long int inet_network(const char *cp) __THROW;
-char *inet_ntoa(struct in_addr in) __THROW;
-struct in_addr inet_makeaddr(int net, int host) __THROW;
-unsigned long int inet_lnaof(struct in_addr in) __THROW;
-unsigned long int inet_netof(struct in_addr in) __THROW;
-
-int inet_pton (int AF, const char* CP, void* BUF) __THROW;
-const char* inet_ntop (int AF, const void* CP, char* BUF, size_t LEN) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/arpa/nameser.h b/mdk-stage1/dietlibc/include/arpa/nameser.h
deleted file mode 100644
index 1ee048d66..000000000
--- a/mdk-stage1/dietlibc/include/arpa/nameser.h
+++ /dev/null
@@ -1,217 +0,0 @@
-#ifndef _ARPA_NAMESER_H
-#define _ARPA_NAMESER_H
-
-#include <endian.h>
-
-#define NS_PACKETSZ 512 /* maximum packet size */
-#define NS_MAXDNAME 1025 /* maximum domain name */
-#define NS_MAXCDNAME 255 /* maximum compressed domain name */
-#define NS_MAXLABEL 63 /* maximum length of domain label */
-#define NS_HFIXEDSZ 12 /* #/bytes of fixed data in header */
-#define NS_QFIXEDSZ 4 /* #/bytes of fixed data in query */
-#define NS_RRFIXEDSZ 10 /* #/bytes of fixed data in r record */
-#define NS_INT32SZ 4 /* #/bytes of data in a u_int32_t */
-#define NS_INT16SZ 2 /* #/bytes of data in a u_int16_t */
-#define NS_INT8SZ 1 /* #/bytes of data in a u_int8_t */
-#define NS_INADDRSZ 4 /* IPv4 T_A */
-#define NS_IN6ADDRSZ 16 /* IPv6 T_AAAA */
-#define NS_CMPRSFLGS 0xc0 /* Flag bits indicating name compression. */
-#define NS_DEFAULTPORT 53 /* For both TCP and UDP. */
-
-/*
- * Currently defined type values for resources and queries.
- */
-typedef enum __ns_type {
- ns_t_invalid = 0, /* Cookie. */
- ns_t_a = 1, /* Host address. */
- ns_t_ns = 2, /* Authoritative server. */
- ns_t_md = 3, /* Mail destination. */
- ns_t_mf = 4, /* Mail forwarder. */
- ns_t_cname = 5, /* Canonical name. */
- ns_t_soa = 6, /* Start of authority zone. */
- ns_t_mb = 7, /* Mailbox domain name. */
- ns_t_mg = 8, /* Mail group member. */
- ns_t_mr = 9, /* Mail rename name. */
- ns_t_null = 10, /* Null resource record. */
- ns_t_wks = 11, /* Well known service. */
- ns_t_ptr = 12, /* Domain name pointer. */
- ns_t_hinfo = 13, /* Host information. */
- ns_t_minfo = 14, /* Mailbox information. */
- ns_t_mx = 15, /* Mail routing information. */
- ns_t_txt = 16, /* Text strings. */
- ns_t_rp = 17, /* Responsible person. */
- ns_t_afsdb = 18, /* AFS cell database. */
- ns_t_x25 = 19, /* X_25 calling address. */
- ns_t_isdn = 20, /* ISDN calling address. */
- ns_t_rt = 21, /* Router. */
- ns_t_nsap = 22, /* NSAP address. */
- ns_t_nsap_ptr = 23, /* Reverse NSAP lookup (deprecated). */
- ns_t_sig = 24, /* Security signature. */
- ns_t_key = 25, /* Security key. */
- ns_t_px = 26, /* X.400 mail mapping. */
- ns_t_gpos = 27, /* Geographical position (withdrawn). */
- ns_t_aaaa = 28, /* Ip6 Address. */
- ns_t_loc = 29, /* Location Information. */
- ns_t_nxt = 30, /* Next domain (security). */
- ns_t_eid = 31, /* Endpoint identifier. */
- ns_t_nimloc = 32, /* Nimrod Locator. */
- ns_t_srv = 33, /* Server Selection. */
- ns_t_atma = 34, /* ATM Address */
- ns_t_naptr = 35, /* Naming Authority PoinTeR */
- ns_t_kx = 36, /* Key Exchange */
- ns_t_cert = 37, /* Certification record */
- ns_t_a6 = 38, /* IPv6 address (deprecates AAAA) */
- ns_t_dname = 39, /* Non-terminal DNAME (for IPv6) */
- ns_t_sink = 40, /* Kitchen sink (experimentatl) */
- ns_t_opt = 41, /* EDNS0 option (meta-RR) */
- ns_t_tsig = 250, /* Transaction signature. */
- ns_t_ixfr = 251, /* Incremental zone transfer. */
- ns_t_axfr = 252, /* Transfer zone of authority. */
- ns_t_mailb = 253, /* Transfer mailbox records. */
- ns_t_maila = 254, /* Transfer mail agent records. */
- ns_t_any = 255, /* Wildcard match. */
- ns_t_zxfr = 256, /* BIND-specific, nonstandard. */
- ns_t_max = 65536
-} ns_type;
-
-/*
- * Values for class field
- */
-typedef enum __ns_class {
- ns_c_invalid = 0, /* Cookie. */
- ns_c_in = 1, /* Internet. */
- ns_c_2 = 2, /* unallocated/unsupported. */
- ns_c_chaos = 3, /* MIT Chaos-net. */
- ns_c_hs = 4, /* MIT Hesiod. */
- /* Query class values which do not appear in resource records */
- ns_c_none = 254, /* for prereq. sections in update requests */
- ns_c_any = 255, /* Wildcard match. */
- ns_c_max = 65536
-} ns_class;
-
-typedef struct {
- unsigned id :16; /* query identification number */
-#if BYTE_ORDER == BIG_ENDIAN
- /* fields in third byte */
- unsigned qr: 1; /* response flag */
- unsigned opcode: 4; /* purpose of message */
- unsigned aa: 1; /* authoritive answer */
- unsigned tc: 1; /* truncated message */
- unsigned rd: 1; /* recursion desired */
- /* fields in fourth byte */
- unsigned ra: 1; /* recursion available */
- unsigned unused :1; /* unused bits (MBZ as of 4.9.3a3) */
- unsigned ad: 1; /* authentic data from named */
- unsigned cd: 1; /* checking disabled by resolver */
- unsigned rcode :4; /* response code */
-#endif
-#if BYTE_ORDER == LITTLE_ENDIAN || BYTE_ORDER == PDP_ENDIAN
- /* fields in third byte */
- unsigned rd :1; /* recursion desired */
- unsigned tc :1; /* truncated message */
- unsigned aa :1; /* authoritive answer */
- unsigned opcode :4; /* purpose of message */
- unsigned qr :1; /* response flag */
- /* fields in fourth byte */
- unsigned rcode :4; /* response code */
- unsigned cd: 1; /* checking disabled by resolver */
- unsigned ad: 1; /* authentic data from named */
- unsigned unused :1; /* unused bits (MBZ as of 4.9.3a3) */
- unsigned ra :1; /* recursion available */
-#endif
- /* remaining bytes */
- unsigned qdcount :16; /* number of question entries */
- unsigned ancount :16; /* number of answer entries */
- unsigned nscount :16; /* number of authority entries */
- unsigned arcount :16; /* number of resource entries */
-} HEADER;
-
-#define PACKETSZ NS_PACKETSZ
-#define MAXDNAME NS_MAXDNAME
-#define MAXCDNAME NS_MAXCDNAME
-#define MAXLABEL NS_MAXLABEL
-#define HFIXEDSZ NS_HFIXEDSZ
-#define QFIXEDSZ NS_QFIXEDSZ
-#define RRFIXEDSZ NS_RRFIXEDSZ
-#define INT32SZ NS_INT32SZ
-#define INT16SZ NS_INT16SZ
-#define INADDRSZ NS_INADDRSZ
-#define IN6ADDRSZ NS_IN6ADDRSZ
-#define INDIR_MASK NS_CMPRSFLGS
-#define NAMESERVER_PORT NS_DEFAULTPORT
-
-#define S_ZONE ns_s_zn
-#define S_PREREQ ns_s_pr
-#define S_UPDATE ns_s_ud
-#define S_ADDT ns_s_ar
-
-#define QUERY ns_o_query
-#define IQUERY ns_o_iquery
-#define STATUS ns_o_status
-#define NS_NOTIFY_OP ns_o_notify
-#define NS_UPDATE_OP ns_o_update
-
-#define NOERROR ns_r_noerror
-#define FORMERR ns_r_formerr
-#define SERVFAIL ns_r_servfail
-#define NXDOMAIN ns_r_nxdomain
-#define NOTIMP ns_r_notimpl
-#define REFUSED ns_r_refused
-#define YXDOMAIN ns_r_yxdomain
-#define YXRRSET ns_r_yxrrset
-#define NXRRSET ns_r_nxrrset
-#define NOTAUTH ns_r_notauth
-#define NOTZONE ns_r_notzone
-
-#define DELETE ns_uop_delete
-#define ADD ns_uop_add
-
-#define T_A ns_t_a
-#define T_NS ns_t_ns
-#define T_MD ns_t_md
-#define T_MF ns_t_mf
-#define T_CNAME ns_t_cname
-#define T_SOA ns_t_soa
-#define T_MB ns_t_mb
-#define T_MG ns_t_mg
-#define T_MR ns_t_mr
-#define T_NULL ns_t_null
-#define T_WKS ns_t_wks
-#define T_PTR ns_t_ptr
-#define T_HINFO ns_t_hinfo
-#define T_MINFO ns_t_minfo
-#define T_MX ns_t_mx
-#define T_TXT ns_t_txt
-#define T_RP ns_t_rp
-#define T_AFSDB ns_t_afsdb
-#define T_X25 ns_t_x25
-#define T_ISDN ns_t_isdn
-#define T_RT ns_t_rt
-#define T_NSAP ns_t_nsap
-#define T_NSAP_PTR ns_t_nsap_ptr
-#define T_SIG ns_t_sig
-#define T_KEY ns_t_key
-#define T_PX ns_t_px
-#define T_GPOS ns_t_gpos
-#define T_AAAA ns_t_aaaa
-#define T_LOC ns_t_loc
-#define T_NXT ns_t_nxt
-#define T_EID ns_t_eid
-#define T_NIMLOC ns_t_nimloc
-#define T_SRV ns_t_srv
-#define T_ATMA ns_t_atma
-#define T_NAPTR ns_t_naptr
-#define T_TSIG ns_t_tsig
-#define T_IXFR ns_t_ixfr
-#define T_AXFR ns_t_axfr
-#define T_MAILB ns_t_mailb
-#define T_MAILA ns_t_maila
-#define T_ANY ns_t_any
-
-#define C_IN ns_c_in
-#define C_CHAOS ns_c_chaos
-#define C_HS ns_c_hs
-#define C_NONE ns_c_none
-#define C_ANY ns_c_any
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/assert.h b/mdk-stage1/dietlibc/include/assert.h
deleted file mode 100644
index bb573d0f2..000000000
--- a/mdk-stage1/dietlibc/include/assert.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef _ASSERT_H
-#define _ASSERT_H
-
-#include <sys/cdefs.h>
-
-/* This prints an "Assertion failed" message and aborts. */
-extern void __assert_fail (__const char *__assertion, __const char *__file,
- unsigned int __line, __const char *__function)
- __THROW __attribute__ ((__noreturn__));
-
-#ifdef __PRETTY_FUNCTION__
-#define __ASSERT_FUNCTION __PRETTY_FUNCTION__
-#else
-#define __ASSERT_FUNCTION __func__
-#endif
-
-#undef assert
-#ifdef NDEBUG
-#define assert(expr)
-#else
-# define assert(expr) \
- ((void) ((expr) ? 0 : \
- (__assert_fail (#expr, \
- __FILE__, __LINE__, __ASSERT_FUNCTION), 0)))
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/ctype.h b/mdk-stage1/dietlibc/include/ctype.h
deleted file mode 100644
index 9322e8c7b..000000000
--- a/mdk-stage1/dietlibc/include/ctype.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef _CTYPE_H
-#define _CTYPE_H
-
-#include <sys/cdefs.h>
-
-extern int isascii (int c) __THROW __attribute__ ((__const__));
-extern int isblank (int c) __THROW __attribute__ ((__const__));
-extern int isalnum (int c) __THROW __attribute__ ((__const__));
-extern int isalpha (int c) __THROW __attribute__ ((__const__));
-extern int isdigit (int c) __THROW __attribute__ ((__const__));
-extern int isspace (int c) __THROW __attribute__ ((__const__));
-
-extern int isupper (int c) __THROW __attribute__ ((__const__));
-extern int islower (int c) __THROW __attribute__ ((__const__));
-
-extern int tolower(int c) __THROW __attribute__ ((__const__));
-extern int toupper(int c) __THROW __attribute__ ((__const__));
-
-extern int isprint(int c) __THROW __attribute__ ((__const__));
-extern int ispunct(int c) __THROW __attribute__ ((__const__));
-extern int iscntrl(int c) __THROW __attribute__ ((__const__));
-
-/* fscking GNU extensions! */
-extern int isxdigit(int c) __THROW __attribute__ ((__const__));
-
-extern int isgraph(int c) __THROW __attribute__ ((__const__));
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/daemon.h b/mdk-stage1/dietlibc/include/daemon.h
deleted file mode 100644
index 9049f367d..000000000
--- a/mdk-stage1/dietlibc/include/daemon.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _DAEMON_H
-#define _DAEMON_H
-
-extern int daemon (int nochdir,int noclose);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/dirent.h b/mdk-stage1/dietlibc/include/dirent.h
deleted file mode 100644
index b0ad4f5ec..000000000
--- a/mdk-stage1/dietlibc/include/dirent.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _DIRENT_H
-#define _DIRENT_H 1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <linux/dirent.h>
-
-#define d_fileno d_ino /* Backwards compatibility. */
-
-#undef _DIRENT_HAVE_D_NAMLEN
-#define _DIRENT_HAVE_D_RECLEN
-#define _DIRENT_HAVE_D_OFF
-#define _DIRENT_HAVE_D_TYPE
-
-typedef struct __dirstream DIR;
-
-DIR *opendir (const char *__name) __THROW;
-int closedir (DIR *__dirp) __THROW;
-struct dirent *readdir (DIR *__dirp) __THROW;
-struct dirent64 *readdir64 (DIR *__dirp) __THROW;
-void rewinddir (DIR *__dirp) __THROW;
-void seekdir (DIR *__dirp, long int __pos) __THROW;
-long int telldir (DIR *__dirp) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/dlfcn.h b/mdk-stage1/dietlibc/include/dlfcn.h
deleted file mode 100644
index b96f8f615..000000000
--- a/mdk-stage1/dietlibc/include/dlfcn.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _DLFCN_H
-#define _DLFCN_H 1
-
-#define RTLD_LAZY 0x00000
-#define RTLD_NOW 0x00001
-
-#define RTLD_LOCAL 0x00000
-#define RTLD_GLOBAL 0x10000
-
-void *dlopen (const char *filename, int flag);
-const char *dlerror(void);
-void *dlsym(void *handle, char *symbol);
-int dlclose (void *handle);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/elf.h b/mdk-stage1/dietlibc/include/elf.h
deleted file mode 100644
index be09dbee4..000000000
--- a/mdk-stage1/dietlibc/include/elf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/elf.h>
diff --git a/mdk-stage1/dietlibc/include/endian.h b/mdk-stage1/dietlibc/include/endian.h
deleted file mode 100644
index 463c24fff..000000000
--- a/mdk-stage1/dietlibc/include/endian.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _ENDIAN_H
-#define _ENDIAN_H
-
-#define __LITTLE_ENDIAN 1234
-#define __BIG_ENDIAN 4321
-
-#ifdef __i386__
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#define __FLOAT_WORD_ORDER __BYTE_ORDER
-#endif
-
-#ifdef __sparc__
-#define __BYTE_ORDER __BIG_ENDIAN
-#define __FLOAT_WORD_ORDER __BYTE_ORDER
-#endif
-
-#ifdef __mips__
-#ifdef __MIPSEB__
-#define __BIG_ENDIAN__
-#endif
-#endif
-
-#ifndef __BYTE_ORDER
-#ifdef __BIG_ENDIAN__
-#define __BYTE_ORDER __BIG_ENDIAN
-#define __FLOAT_WORD_ORDER __BYTE_ORDER
-#else
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#define __FLOAT_WORD_ORDER __BYTE_ORDER
-#endif
-#endif
-
-#define LITTLE_ENDIAN __LITTLE_ENDIAN
-#define BIG_ENDIAN __BIG_ENDIAN
-#define BYTE_ORDER __BYTE_ORDER
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-# define __LONG_LONG_PAIR(HI, LO) LO, HI
-#elif __BYTE_ORDER == __BIG_ENDIAN
-# define __LONG_LONG_PAIR(HI, LO) HI, LO
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/errno.h b/mdk-stage1/dietlibc/include/errno.h
deleted file mode 100644
index d1c68f39c..000000000
--- a/mdk-stage1/dietlibc/include/errno.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _ERRNO_H
-#define _ERRNO_H
-
-extern int errno;
-
-#include <linux/errno.h>
-
-extern int *__errno_location(void);
-extern void __set_errno(int error);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/fcntl.h b/mdk-stage1/dietlibc/include/fcntl.h
deleted file mode 100644
index b792502c1..000000000
--- a/mdk-stage1/dietlibc/include/fcntl.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _FCNTL_H
-#define _FCNTL_H
-
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-#include <unistd.h>
-
-#include <asm/fcntl.h>
-
-extern int fcntl (int __fd, int __cmd, ...) __THROW;
-extern int open (const char *__file, int __oflag, ...) __THROW;
-extern int open64 (const char *__file, int __oflag, ...) __THROW;
-extern int creat (const char *__file, mode_t __mode) __THROW;
-extern int creat64 (const char *__file, mode_t __mode) __THROW;
-extern int lockf (int __fd, int __cmd, off_t __len) __THROW;
-extern int lockf64 (int __fd, int __cmd, off64_t __len) __THROW;
-
-#define F_ULOCK 0 /* Unlock a previously locked region. */
-#define F_LOCK 1 /* Lock a region for exclusive use. */
-#define F_TLOCK 2 /* Test and lock a region for exclusive use. */
-#define F_TEST 3 /* Test a region for other processes locks. */
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/features.h b/mdk-stage1/dietlibc/include/features.h
deleted file mode 100644
index 5b0283f20..000000000
--- a/mdk-stage1/dietlibc/include/features.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#warning "someone included features.h, apparently someone is including glibc headers!"
-
-#define __dietlibc__
diff --git a/mdk-stage1/dietlibc/include/fnmatch.h b/mdk-stage1/dietlibc/include/fnmatch.h
deleted file mode 100644
index 762b43ff7..000000000
--- a/mdk-stage1/dietlibc/include/fnmatch.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef _FNMATCH_H
-#define _FNMATCH_H
-
-#include <sys/cdefs.h>
-
-int fnmatch(const char *pattern, const char *string, int flags) __THROW;
-
-#define FNM_NOESCAPE 1
-#define FNM_PATHNAME 2
-#define FNM_FILE_NAME 2
-#define FNM_PERIOD 4
-#define FNM_LEADING_DIR 8
-#define FNM_CASEFOLD 16
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/ftw.h b/mdk-stage1/dietlibc/include/ftw.h
deleted file mode 100644
index c888f0021..000000000
--- a/mdk-stage1/dietlibc/include/ftw.h
+++ /dev/null
@@ -1,51 +0,0 @@
-#ifndef _FTW_H
-#define _FTW_H
-
-#include <sys/cdefs.h>
-#include <sys/stat.h>
-
-struct FTW
- {
- int base;
- int level;
- };
-
-int ftw (const char *dir, int (*fn)(const char *file, const struct stat *sb, int flag), int depth) __THROW;
-int nftw (const char *dir, int (*fn)(const char *file, const struct stat *sb, int flag, struct FTW *s), int depth, int flags) __THROW;
-
-enum
-{
- FTW_F, /* Regular file. */
-#define FTW_F FTW_F
- FTW_D, /* Directory. */
-#define FTW_D FTW_D
- FTW_DNR, /* Unreadable directory. */
-#define FTW_DNR FTW_DNR
- FTW_NS, /* Unstatable file. */
-#define FTW_NS FTW_NS
- FTW_SL, /* Symbolic link. */
-# define FTW_SL FTW_SL
-/* These flags are only passed from the `nftw' function. */
- FTW_DP, /* Directory, all subdirs have been visited. */
-# define FTW_DP FTW_DP
- FTW_SLN /* Symbolic link naming non-existing file. */
-# define FTW_SLN FTW_SLN
-};
-
-typedef int (*__ftw_func_t) (__const char *__filename,
- __const struct stat *__status, int __flag) __THROW;
-
-typedef int (*__nftw_func_t) (__const char *__filename,
- __const struct stat *__status, int __flag,
- struct FTW *__info) __THROW;
-
-#ifndef __NO_STAT64
-typedef int (*__ftw64_func_t) (__const char *__filename,
- __const struct stat64 *__status, int __flag) __THROW;
-
-typedef int (*__nftw64_func_t) (__const char *__filename,
- __const struct stat64 *__status,
- int __flag, struct FTW *__info) __THROW;
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/getopt.h b/mdk-stage1/dietlibc/include/getopt.h
deleted file mode 100644
index ebfc5522d..000000000
--- a/mdk-stage1/dietlibc/include/getopt.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __GETOPT_H__
-#define __GETOPT_H__
-
-extern int optind,opterr;
-extern char *optarg;
-int getopt(int argc, char *argv[], char *options);
-
-/* the following was taken from GNU getopt, it's not actually supported
- * by the diet libc! */
-extern int optopt;
-
-struct option {
- const char* name;
- int has_arg;
- int* flag;
- int val;
-};
-
-#define no_argument 0
-#define required_argument 1
-#define optional_argument 2
-
-extern int getopt_long(int argc, char *const *argv,
- const char *shortopts, const struct option *longopts,
- int *longind);
-
-extern int getopt_long_only(int argc, char *const *argv,
- const char *shortopts, const struct option *longopts,
- int *longind);
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/glob.h b/mdk-stage1/dietlibc/include/glob.h
deleted file mode 100644
index 80febbccf..000000000
--- a/mdk-stage1/dietlibc/include/glob.h
+++ /dev/null
@@ -1,55 +0,0 @@
-#ifndef _GLOB_H
-#define _GLOB_H
-
-
-typedef struct {
- size_t gl_pathc; /* Count of paths matched so far */
- char **gl_pathv; /* List of matched pathnames. */
- size_t gl_offs; /* Slots to reserve in `gl_pathv'. */
- int gl_flags; /* Set to FLAGS, maybe | GLOB_MAGCHAR. */
-} glob_t;
-
-
-int glob(const char *pattern, int flags,
- int errfunc(const char * epath, int eerrno),
- glob_t *pglob) __THROW;
-
-void globfree(glob_t *pglob) __THROW;
-
-
-
-/* Bits set in the FLAGS argument to `glob'. */
-#define GLOB_ERR (1 << 0)/* Return on read errors. */
-#define GLOB_MARK (1 << 1)/* Append a slash to each name. */
-#define GLOB_NOSORT (1 << 2)/* Don't sort the names. */
-#define GLOB_DOOFFS (1 << 3)/* Insert PGLOB->gl_offs NULLs. */
-#define GLOB_NOCHECK (1 << 4)/* If nothing matches, return the pattern. */
-#define GLOB_APPEND (1 << 5)/* Append to results of a previous call. */
-#define GLOB_NOESCAPE (1 << 6)/* Backslashes don't quote metacharacters. */
-#define GLOB_PERIOD (1 << 7)/* Leading `.' can be matched by metachars. */
-
-#define GLOB_MAGCHAR (1 << 8)/* Set in gl_flags if any metachars seen. */
-#define GLOB_ALTDIRFUNC (1 << 9)/* Use gl_opendir et al functions. */
-#define GLOB_BRACE (1 << 10)/* Expand "{a,b}" to "a" "b". */
-#define GLOB_NOMAGIC (1 << 11)/* If no magic chars, return the pattern. */
-#define GLOB_TILDE (1 << 12)/* Expand ~user and ~ to home directories. */
-#define GLOB_ONLYDIR (1 << 13)/* Match only directories. */
-#define GLOB_TILDE_CHECK (1 << 14)/* Like GLOB_TILDE but return an error
- if the user name is not available. */
-#define __GLOB_FLAGS (GLOB_ERR|GLOB_MARK|GLOB_NOSORT|GLOB_DOOFFS| \
- GLOB_NOESCAPE|GLOB_NOCHECK|GLOB_APPEND| \
- GLOB_PERIOD|GLOB_ALTDIRFUNC|GLOB_BRACE| \
- GLOB_NOMAGIC|GLOB_TILDE|GLOB_ONLYDIR|GLOB_TILDE_CHECK)
-
-
-/* Error returns from `glob'. */
-#define GLOB_NOSPACE 1 /* Ran out of memory. */
-#define GLOB_ABORTED 2 /* Read error. */
-#define GLOB_NOMATCH 3 /* No matches found. */
-#define GLOB_NOSYS 4 /* Not implemented. */
-/* Previous versions of this file defined GLOB_ABEND instead of
- GLOB_ABORTED. Provide a compatibility definition here. */
-#define GLOB_ABEND GLOB_ABORTED
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/grp.h b/mdk-stage1/dietlibc/include/grp.h
deleted file mode 100644
index 32bf49afc..000000000
--- a/mdk-stage1/dietlibc/include/grp.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _GRP_H
-#define _GRP_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-struct group
- {
- char *gr_name; /* Group name. */
- char *gr_passwd; /* Password. */
- gid_t gr_gid; /* Group ID. */
- char **gr_mem; /* Member list. */
- };
-
-extern struct group *getgrgid (gid_t uid) __THROW;
-extern struct group *getgrnam (const char *name) __THROW;
-
-extern struct group *getgrent(void) __THROW;
-extern void setgrent(void) __THROW;
-extern void endgrent(void) __THROW;
-
-extern int setgroups(size_t n, const gid_t *groups) __THROW;
-extern int initgroups(const char *user, gid_t group) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/inttypes.h b/mdk-stage1/dietlibc/include/inttypes.h
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/include/inttypes.h
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/include/limits.h b/mdk-stage1/dietlibc/include/limits.h
deleted file mode 100644
index a333debfd..000000000
--- a/mdk-stage1/dietlibc/include/limits.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _LIMITS_H
-#define _LIMITS_H
-
-#include <linux/limits.h>
-
-#define __WORDSIZE 32
-
-#ifdef __alpha__
-#undef __WORDSIZE
-#define __WORDSIZE 64
-#endif
-
-#ifndef PATH_MAX
-#define PATH_MAX 4096
-#endif
-
-#define CHAR_BIT 8
-
-#define SCHAR_MIN (-128)
-#define SCHAR_MAX 0x7f
-#define UCHAR_MAX 0xff
-
-#define SHRT_MIN (-SHRT_MAX-1)
-#define SHRT_MAX 0x7fff
-#define USHRT_MAX 0xffff
-
-#define INT_MIN (-INT_MAX-1)
-#define INT_MAX 0x7fffffff
-#define UINT_MAX 0xffffffff
-
-#if __WORDSIZE == 64
-#define LONG_MAX 9223372036854775807L
-#define ULONG_MAX 18446744073709551615UL
-#else
-#define LONG_MAX 2147483647L
-#define ULONG_MAX 4294967295UL
-#endif
-#define LONG_MIN (-LONG_MAX - 1L)
-
-#define LLONG_MAX 9223372036854775807LL
-#define LLONG_MIN (-LLONG_MAX - 1LL)
-
-/* Maximum value an `unsigned long long int' can hold. (Minimum is 0.) */
-#define ULLONG_MAX 18446744073709551615ULL
-
-#define PASS_MAX 256
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/locale.h b/mdk-stage1/dietlibc/include/locale.h
deleted file mode 100644
index acbeec8c1..000000000
--- a/mdk-stage1/dietlibc/include/locale.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#warning "there is no locale support for diet libc yet"
-
-#define setlocale(a,b) 0
-#define bindtextdomain
-#define textdomain
-
diff --git a/mdk-stage1/dietlibc/include/malloc.h b/mdk-stage1/dietlibc/include/malloc.h
deleted file mode 100644
index c8b49f26d..000000000
--- a/mdk-stage1/dietlibc/include/malloc.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <stdlib.h>
diff --git a/mdk-stage1/dietlibc/include/math.h b/mdk-stage1/dietlibc/include/math.h
deleted file mode 100644
index 2f4f2e33f..000000000
--- a/mdk-stage1/dietlibc/include/math.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef _MATH_H
-#define _MATH_H
-
-#include <sys/cdefs.h>
-
-#define M_E 2.7182818284590452354 /* e */
-#define M_LOG2E 1.4426950408889634074 /* log_2 e */
-#define M_LOG10E 0.43429448190325182765 /* log_10 e */
-#define M_LN2 0.69314718055994530942 /* log_e 2 */
-#define M_LN10 2.30258509299404568402 /* log_e 10 */
-#define M_PI 3.14159265358979323846 /* pi */
-#define M_PI_2 1.57079632679489661923 /* pi/2 */
-#define M_PI_4 0.78539816339744830962 /* pi/4 */
-#define M_1_PI 0.31830988618379067154 /* 1/pi */
-#define M_2_PI 0.63661977236758134308 /* 2/pi */
-#define M_2_SQRTPI 1.12837916709551257390 /* 2/sqrt(pi) */
-#define M_SQRT2 1.41421356237309504880 /* sqrt(2) */
-#define M_SQRT1_2 0.70710678118654752440 /* 1/sqrt(2) */
-
-#define M_El 2.7182818284590452353602874713526625L /* e */
-#define M_LOG2El 1.4426950408889634073599246810018922L /* log_2 e */
-#define M_LOG10El 0.4342944819032518276511289189166051L /* log_10 e */
-#define M_LN2l 0.6931471805599453094172321214581766L /* log_e 2 */
-#define M_LN10l 2.3025850929940456840179914546843642L /* log_e 10 */
-#define M_PIl 3.1415926535897932384626433832795029L /* pi */
-#define M_PI_2l 1.5707963267948966192313216916397514L /* pi/2 */
-#define M_PI_4l 0.7853981633974483096156608458198757L /* pi/4 */
-#define M_1_PIl 0.3183098861837906715377675267450287L /* 1/pi */
-#define M_2_PIl 0.6366197723675813430755350534900574L /* 2/pi */
-#define M_2_SQRTPIl 1.1283791670955125738961589031215452L /* 2/sqrt(pi) */
-#define M_SQRT2l 1.4142135623730950488016887242096981L /* sqrt(2) */
-#define M_SQRT1_2l 0.7071067811865475244008443621048490L /* 1/sqrt(2) */
-
-double sin(double d) __THROW __attribute__((__const__));
-double cos(double d) __THROW __attribute__((__const__));
-double tan(double d) __THROW __attribute__((__const__));
-
-double sinh(double d) __THROW __attribute__((__const__));
-double cosh(double d) __THROW __attribute__((__const__));
-double tanh(double d) __THROW __attribute__((__const__));
-
-double asin(double d) __THROW __attribute__((__const__));
-double acos(double d) __THROW __attribute__((__const__));
-double atan(double d) __THROW __attribute__((__const__));
-
-double asinh(double d) __THROW __attribute__((__const__));
-double acosh(double d) __THROW __attribute__((__const__));
-double atanh(double d) __THROW __attribute__((__const__));
-
-double exp(double d) __THROW __attribute__((__const__));
-double log(double d) __THROW __attribute__((__const__));
-double log10(double d) __THROW __attribute__((__const__));
-
-double pow(double x, double y) __THROW __attribute__((__const__));
-
-double sqrt(double x) __THROW __attribute__((__const__));
-double fabs(double x) __THROW __attribute__((__const__));
-double fmod(double x, double y) __THROW __attribute__((__const__));
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/memory.h b/mdk-stage1/dietlibc/include/memory.h
deleted file mode 100644
index 39adee705..000000000
--- a/mdk-stage1/dietlibc/include/memory.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _MEMORY_H
-#define _MEMORY_H
-
-#include <string.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/mntent.h b/mdk-stage1/dietlibc/include/mntent.h
deleted file mode 100644
index 301403224..000000000
--- a/mdk-stage1/dietlibc/include/mntent.h
+++ /dev/null
@@ -1,72 +0,0 @@
-#ifndef _MNTENT_H
-#define _MNTENT_H
-
-#include <sys/cdefs.h>
-#include <stdio.h>
-#include <paths.h>
-
-#define MNTTAB _PATH_MNTTAB /* Deprecated alias. */
-#define MOUNTED _PATH_MOUNTED /* Deprecated alias. */
-
-/* General filesystem types. */
-#define MNTTYPE_IGNORE "ignore" /* Ignore this entry. */
-#define MNTTYPE_NFS "nfs" /* Network file system. */
-#define MNTTYPE_SWAP "swap" /* Swap device. */
-
-
-/* Generic mount options. */
-#define MNTOPT_DEFAULTS "defaults" /* Use all default options. */
-#define MNTOPT_RO "ro" /* Read only. */
-#define MNTOPT_RW "rw" /* Read/write. */
-#define MNTOPT_SUID "suid" /* Set uid allowed. */
-#define MNTOPT_NOSUID "nosuid" /* No set uid allowed. */
-#define MNTOPT_NOAUTO "noauto" /* Do not auto mount. */
-
-__BEGIN_DECLS
-
-/* Structure describing a mount table entry. */
-struct mntent
- {
- char *mnt_fsname; /* Device or server for filesystem. */
- char *mnt_dir; /* Directory mounted on. */
- char *mnt_type; /* Type of filesystem: ufs, nfs, etc. */
- char *mnt_opts; /* Comma-separated options for fs. */
- int mnt_freq; /* Dump frequency (in days). */
- int mnt_passno; /* Pass number for `fsck'. */
- };
-
-
-/* Prepare to begin reading and/or writing mount table entries from the
- beginning of FILE. MODE is as for `fopen'. */
-extern FILE *setmntent (const char *file, const char *mode) __THROW;
-
-/* Read one mount table entry from STREAM. Returns a pointer to storage
- reused on the next call, or null for EOF or error (use feof/ferror to
- check). */
-extern struct mntent *getmntent (FILE* stream) __THROW;
-
-#ifdef __USE_MISC
-/* Reentrant version of the above function. */
-extern struct mntent *getmntent_r (FILE* stream,
- struct mntent* result,
- char* buffer,
- int bufsize) __THROW;
-#endif
-
-/* Write the mount table entry described by MNT to STREAM.
- Return zero on success, nonzero on failure. */
-extern int addmntent (FILE* stream,
- const struct mntent* mnt) __THROW;
-
-/* Close a stream opened with `setmntent'. */
-extern int endmntent (FILE *stream) __THROW;
-
-/* Search MNT->mnt_opts for an option matching OPT.
- Returns the address of the substring, or null if none found. */
-extern char *hasmntopt (const struct mntent *__mnt,
- const char *opt) __THROW;
-
-
-__END_DECLS
-
-#endif /* mntent.h */
diff --git a/mdk-stage1/dietlibc/include/net/if.h b/mdk-stage1/dietlibc/include/net/if.h
deleted file mode 100644
index 88f386f46..000000000
--- a/mdk-stage1/dietlibc/include/net/if.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _NET_IF_H
-#define _NET_IF_H
-
-#include <sys/cdefs.h>
-
-#include <linux/if.h>
-
-unsigned int if_nametoindex (const char *ifname) __THROW;
-char *if_indextoname (unsigned int ifindex, char *ifname) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/net/if_arp.h b/mdk-stage1/dietlibc/include/net/if_arp.h
deleted file mode 100644
index fe37a22dc..000000000
--- a/mdk-stage1/dietlibc/include/net/if_arp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _NET_IF_ARP_H
-#define _NET_IF_ARP_H
-
-#include <linux/if_arp.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/net/route.h b/mdk-stage1/dietlibc/include/net/route.h
deleted file mode 100644
index 5e5db7b1a..000000000
--- a/mdk-stage1/dietlibc/include/net/route.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _NET_IF_ROUTE_H
-#define _NET_IF_ROUTE_H
-
-#include <linux/route.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/netdb.h b/mdk-stage1/dietlibc/include/netdb.h
deleted file mode 100644
index e90ea81ac..000000000
--- a/mdk-stage1/dietlibc/include/netdb.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef _NETDB_H
-#define _NETDB_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-/* Absolute file name for network data base files. */
-#define _PATH_HEQUIV "/etc/hosts.equiv"
-#define _PATH_HOSTS "/etc/hosts"
-#define _PATH_NETWORKS "/etc/networks"
-#define _PATH_NSSWITCH_CONF "/etc/nsswitch.conf"
-#define _PATH_PROTOCOLS "/etc/protocols"
-#define _PATH_SERVICES "/etc/services"
-
-/* Description of data base entry for a single service. */
-struct servent
-{
- char *s_name; /* Official service name. */
- char **s_aliases; /* Alias list. */
- int s_port; /* Port number. */
- char *s_proto; /* Protocol to use. */
-};
-
-extern void endservent (void) __THROW;
-extern struct servent *getservent (void) __THROW;
-extern struct servent *getservbyname (const char *__name,
- const char *__proto) __THROW;
-extern struct servent *getservbyport (int __port, const char *__proto)
- __THROW;
-
-struct hostent
-{
- char *h_name; /* Official name of host. */
- char **h_aliases; /* Alias list. */
- int h_addrtype; /* Host address type. */
- socklen_t h_length; /* Length of address. */
- char **h_addr_list; /* List of addresses from name server. */
-#define h_addr h_addr_list[0] /* Address, for backward compatibility. */
-};
-
-extern void endhostent (void) __THROW;
-extern struct hostent *gethostent (void) __THROW;
-extern struct hostent *gethostbyaddr (const void *__addr, socklen_t __len,
- int __type) __THROW;
-extern struct hostent *gethostbyname (const char *__name) __THROW;
-extern struct hostent *gethostbyname2 (const char *__name, int __af) __THROW;
-
-/* this glibc "invention" is so ugly, I'm going to throw up any minute
- * now */
-extern int gethostbyname_r(const char* NAME, struct hostent* RESULT_BUF,char* BUF,
- size_t BUFLEN, struct hostent** RESULT,
- int* H_ERRNOP) __THROW;
-
-#define HOST_NOT_FOUND 1
-#define TRY_AGAIN 2
-#define NO_RECOVERY 3
-#define NO_ADDRESS 4
-
-extern int gethostbyaddr_r(const char* addr, size_t length, int format,
- struct hostent* result, char *buf, size_t buflen,
- struct hostent **RESULT, int *h_errnop) __THROW;
-
-struct protoent {
- char *p_name; /* official protocol name */
- char **p_aliases; /* alias list */
- int p_proto; /* protocol number */
-};
-
-struct protoent *getprotoent(void) __THROW;
-struct protoent *getprotobyname(const char *name) __THROW;
-struct protoent *getprotobynumber(int proto) __THROW;
-void setprotoent(int stayopen) __THROW;
-void endprotoent(void) __THROW;
-
-
-/* Description of data base entry for a single network. NOTE: here a
- poor assumption is made. The network number is expected to fit
- into an unsigned long int variable. */
-struct netent
-{
- char *n_name; /* Official name of network. */
- char **n_aliases; /* Alias list. */
- int n_addrtype; /* Net address type. */
- uint32_t n_net; /* Network number. */
-};
-
-extern struct netent *getnetbyname (__const char *__name) __THROW;
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/netinet/in.h b/mdk-stage1/dietlibc/include/netinet/in.h
deleted file mode 100644
index 0569c8289..000000000
--- a/mdk-stage1/dietlibc/include/netinet/in.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _NETINET_IN_H
-#define _NETINET_IN_H
-
-#include <linux/in.h>
-#include <linux/in6.h>
-
-#define IPPORT_RESERVED 1024
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/netinet/in_systm.h b/mdk-stage1/dietlibc/include/netinet/in_systm.h
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/include/netinet/in_systm.h
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/include/netinet/ip.h b/mdk-stage1/dietlibc/include/netinet/ip.h
deleted file mode 100644
index 35bf9cc42..000000000
--- a/mdk-stage1/dietlibc/include/netinet/ip.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _NETINET_IP_H
-#define _NETINET_IP_H
-
-#include <linux/ip.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/paths.h b/mdk-stage1/dietlibc/include/paths.h
deleted file mode 100644
index 0e36bb10e..000000000
--- a/mdk-stage1/dietlibc/include/paths.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _PATHS_H
-#define _PATHS_H
-
-#define _PATH_BSHELL "/bin/sh"
-#define _PATH_DEFPATH "/bin:/usr/bin:"
-
-#define _PATH_DEVNULL "/dev/null"
-
-#define _PATH_CONSOLE "/dev/console"
-#define _PATH_MOUNTED "/etc/mtab"
-
-#define _PATH_PASSWD "/etc/passwd"
-#define _PATH_GROUP "/etc/group"
-#define _PATH_SHADOW "/etc/shadow"
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/pthread.h b/mdk-stage1/dietlibc/include/pthread.h
deleted file mode 100644
index e922ab28b..000000000
--- a/mdk-stage1/dietlibc/include/pthread.h
+++ /dev/null
@@ -1,227 +0,0 @@
-#ifndef _PTHREAD_H
-#define _PTHREAD_H 1
-
-#include <sched.h>
-#include <signal.h>
-#include <setjmp.h>
-
-/* arg... kernel haeder... */
-#define ENOTSUP 524 /* Operation is not supported */
-
-#define PTHREAD_STACK_SIZE 16384
-
-#define PTHREAD_THREADS_MAX 128
-
-#define MAX_SPIN_COUNT 50
-#define SPIN_SLEEP_DURATION 2000001
-
-#define PTHREAD_KEYS_MAX 7
-#define PTHREAD_DESTRUCTOR_ITERATIONS 10
-
-typedef struct _pthread_descr_struct *_pthread_descr;
-typedef unsigned long int pthread_t;
-
-/* Fast locks */
-struct _pthread_fastlock {
- int __spinlock;
-};
-
-/* Mutexes */
-typedef struct {
- struct _pthread_fastlock lock;
- _pthread_descr owner;
- int kind;
- unsigned int count;
-} pthread_mutex_t;
-
-enum {
- PTHREAD_MUTEX_FAST_NP,
- PTHREAD_MUTEX_RECURSIVE_NP,
- PTHREAD_MUTEX_ERRORCHECK_NP,
-};
-
-enum
-{
- PTHREAD_PROCESS_PRIVATE,
-#define PTHREAD_PROCESS_PRIVATE PTHREAD_PROCESS_PRIVATE
- PTHREAD_PROCESS_SHARED
-#define PTHREAD_PROCESS_SHARED PTHREAD_PROCESS_SHARED
-};
-
-#define PTHREAD_MUTEX_INITIALIZER \
-{{0}, 0, PTHREAD_MUTEX_FAST_NP, 0}
-
-#define PTHREAD_RECURSIVE_MUTEX_INITIALIZER_NP \
-{{0}, 0, PTHREAD_MUTEX_RECURSIVE_NP, 0}
-
-#define PTHREAD_ERRORCHECK_MUTEX_INITIALIZER_NP \
-{{0}, 0, PTHREAD_MUTEX_ERRORCHECK_NP, 0}
-
-typedef struct {
- int __mutexkind;
-} pthread_mutexattr_t;
-
-int pthread_mutex_init(pthread_mutex_t *mutex,
- const pthread_mutexattr_t *mutexattr);
-int pthread_mutex_lock(pthread_mutex_t *mutex);
-int pthread_mutex_unlock(pthread_mutex_t *mutex);
-int pthread_mutex_trylock(pthread_mutex_t *mutex);
-int pthread_mutex_destroy(pthread_mutex_t *mutex);
-
-/* Conditions */
-typedef void* pthread_condattr_t;
-
-typedef struct {
- struct _pthread_fastlock lock;
- _pthread_descr wait_chain;
-} pthread_cond_t;
-
-#define PTHREAD_COND_INITIALIZER \
-{{0},0}
-
-int pthread_cond_init(pthread_cond_t *cond, pthread_condattr_t *cond_attr);
-int pthread_cond_destroy(pthread_cond_t *cond);
-int pthread_cond_signal(pthread_cond_t *cond);
-int pthread_cond_broadcast(pthread_cond_t *cond);
-int pthread_cond_timedwait(pthread_cond_t *cond, pthread_mutex_t *mutex,
- const struct timespec *abstime);
-int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex);
-
-/* only for completeness (always return NULL) */
-int pthread_condattr_init(pthread_condattr_t *attr);
-int pthread_condattr_destroy(pthread_condattr_t *attr);
-int pthread_condattr_getpshared(const pthread_condattr_t *attr, int *pshared);
-int pthread_condattr_setpshared(pthread_condattr_t *attr, int pshared);
-
-/* thread specific variables */
-typedef unsigned int pthread_key_t;
-
-int pthread_key_create(pthread_key_t *key, void (*destructor)(const void*));
-int pthread_key_delete(pthread_key_t key);
-int pthread_setspecific(pthread_key_t key, const void *value);
-const void *pthread_getspecific(pthread_key_t key);
-
-
-/* Attributes for threads. */
-typedef struct
-{
- int __detachstate;
- int __schedpolicy;
- struct sched_param __schedparam;
- int __inheritsched;
- int __scope;
- void * __stackaddr;
- unsigned long __stacksize;
-} pthread_attr_t;
-
-enum
-{
- PTHREAD_CREATE_JOINABLE,
-#define PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_JOINABLE
- PTHREAD_CREATE_DETACHED
-#define PTHREAD_CREATE_DETACHED PTHREAD_CREATE_DETACHED
-};
-
-enum
-{
- PTHREAD_EXPLICIT_SCHED,
-#define PTHREAD_EXPLICIT_SCHED PTHREAD_EXPLICIT_SCHED
- PTHREAD_INHERIT_SCHED
-#define PTHREAD_INHERIT_SCHED PTHREAD_INHERIT_SCHED
-};
-
-enum /* for completeness */
-{
- PTHREAD_SCOPE_SYSTEM,
-#define PTHREAD_SCOPE_SYSTEM PTHREAD_SCOPE_SYSTEM
- PTHREAD_SCOPE_PROCESS
-#define PTHREAD_SCOPE_PROCESS PTHREAD_SCOPE_PROCESS
-};
-
-int pthread_attr_init(pthread_attr_t *attr);
-int pthread_attr_destroy(pthread_attr_t *attr);
-
-int pthread_attr_setdetachstate(pthread_attr_t *attr, int detachstate);
-int pthread_attr_getdetachstate(const pthread_attr_t *attr, int *detachstate);
-
-int pthread_attr_setschedpolicy(pthread_attr_t *attr, int policy);
-int pthread_attr_getschedpolicy(const pthread_attr_t *attr, int *policy);
-
-int pthread_attr_setschedparam(pthread_attr_t *attr,
- const struct sched_param *param);
-int pthread_attr_getschedparam(const pthread_attr_t *attr,
- struct sched_param *param);
-
-int pthread_attr_setinheritsched(pthread_attr_t *attr, int inherit);
-int pthread_attr_getinheritsched(const pthread_attr_t *attr, int *inherit);
-
-int pthread_attr_setscope(pthread_attr_t *attr, int scope);
-int pthread_attr_getscope(const pthread_attr_t *attr, int *scope);
-
-int pthread_attr_setstackaddr(pthread_attr_t *attr, void *stack);
-int pthread_attr_getstackaddr(pthread_attr_t *attr, void **stack);
-
-int pthread_attr_setstacksize(pthread_attr_t *attr, size_t stacksize);
-int pthread_attr_getstacksize(pthread_attr_t *attr, size_t *stacksize);
-
-/* ONCE */
-typedef int pthread_once_t;
-#define PTHREAD_ONCE_INIT 0
-
-int __pthread_once(pthread_once_t* once_control, void (*init_routine)(void));
-int pthread_once(pthread_once_t* once_control, void (*init_routine)(void));
-
-/* CANCEL */
-
-enum {
- PTHREAD_CANCEL_ENABLE,
-#define PTHREAD_CANCEL_ENABLE PTHREAD_CANCEL_ENABLE
- PTHREAD_CANCEL_DISABLE,
-#define PTHREAD_CANCEL_DISABLE PTHREAD_CANCEL_DISABLE
-};
-
-enum {
- PTHREAD_CANCEL_ASYNCHRONOUS,
-#define PTHREAD_CANCEL_ASYNCHRONOUS PTHREAD_CANCEL_ASYNCHRONOUS
- PTHREAD_CANCEL_DEFERRED,
-#define PTHREAD_CANCEL_DEFERRED PTHREAD_CANCEL_DEFERRED
-};
-
-#define PTHREAD_CANCELED ((void *) -1)
-
-int pthread_cancel(pthread_t thread);
-int pthread_setcancelstate(int state, int *oldstate);
-
-int pthread_setcanceltype(int type, int *oldtype);
-
-void pthread_testcancel(void);
-
-/* CLEANUP */
-
-void pthread_cleanup_push(void (*routine)(void*), void *arg);
-void pthread_cleanup_pop (int execute);
-
-void pthread_cleanup_push_defer_np(void (*routine)(void *), void *arg);
-void pthread_cleanup_pop_restore_np(int execute);
-
-/* FORK */
-
-pid_t pthread_atfork(void (*prepare)(void), void (*parent)(void),
- void (*child)(void));
-
-/* THREADS */
-int pthread_create (pthread_t *__thread,
- const pthread_attr_t *__attr,
- void *(*__start_routine) (void *),
- void *__arg);
-
-void pthread_exit (void *__retval) __attribute__ ((__noreturn__));
-
-int pthread_join (pthread_t __th, void **__thread_return);
-
-int pthread_detach (pthread_t __th);
-
-pthread_t pthread_self (void);
-int pthread_equal (pthread_t __thread1, pthread_t __thread2);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/pwd.h b/mdk-stage1/dietlibc/include/pwd.h
deleted file mode 100644
index e6fb5d0be..000000000
--- a/mdk-stage1/dietlibc/include/pwd.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _PWD_H
-#define _PWD_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-struct passwd {
- char *pw_name; /* Username. */
- char *pw_passwd; /* Password. */
- uid_t pw_uid; /* User ID. */
- gid_t pw_gid; /* Group ID. */
- char *pw_gecos; /* Real name. */
- char *pw_dir; /* Home directory. */
- char *pw_shell; /* Shell program. */
-};
-
-extern struct passwd *getpwuid (uid_t __uid) __THROW;
-extern struct passwd *getpwnam (const char *__name) __THROW;
-
-extern struct passwd *getpwent(void) __THROW;
-extern void setpwent(void) __THROW;
-extern void endpwent(void) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/regex.h b/mdk-stage1/dietlibc/include/regex.h
deleted file mode 100644
index be609d9db..000000000
--- a/mdk-stage1/dietlibc/include/regex.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _REGEX_H
-#define _REGEX_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-typedef ptrdiff_t regoff_t;
-
-typedef struct {
- regoff_t rm_so;
- regoff_t rm_eo;
-} regmatch_t;
-
-#define REG_EXTENDED 1
-#define REG_ICASE 2
-#define REG_NOSUB 4
-#define REG_NEWLINE 8
-
-#define REG_NOTBOL 1
-#define REG_NOTEOL 2
-
-#define REG_NOMATCH -1
-
-#define RE_DUP_MAX 255
-
-struct __regex_t;
-
-typedef int (*matcher)(void*,const char*,int ofs,struct __regex_t *t,int plus,int eflags);
-
-typedef struct __regex_t {
- struct regex {
- matcher m;
- void* next;
- int pieces;
- int num;
- struct branch *b;
- } r;
- int brackets,cflags;
- regmatch_t *l;
-} regex_t;
-
-int regcomp(regex_t *preg, const char *regex, int cflags) __THROW;
-int regexec(const regex_t *preg, const char *string, size_t nmatch, regmatch_t pmatch[], int eflags) __THROW;
-size_t regerror(int errcode, const regex_t *preg, char *errbuf, size_t errbuf_size) __THROW;
-void regfree(regex_t *preg) __THROW;
-
-enum __regex_errors {
- REG_NOERROR,
- REG_BADRPT, /* Invalid use of repetition operators such as using `*' as the first character. */
- REG_BADBR, /* Invalid use of back reference operator. */
- REG_EBRACE, /* Un-matched brace interval operators. */
- REG_EBRACK, /* Un-matched bracket list operators. */
- REG_ERANGE, /* Invalid use of the range operator, eg. the ending point of the
- range occurs prior to the starting point. */
- REG_ECTYPE, /* Unknown character class name. */
- REG_ECOLLATE, /* Invalid collating element. */
- REG_EPAREN, /* Un-matched parenthesis group operators. */
- REG_ESUBREG, /* Invalid back reference to a subexpression. */
- REG_EEND, /* Non specific error. This is not defined by POSIX.2. */
- REG_EESCAPE, /* Trailing backslash. */
- REG_BADPAT, /* Invalid use of pattern operators such as group or list. */
- REG_ESIZE, /* Compiled regular expression requires a pattern buffer
- larger than 64Kb. This is not defined by POSIX.2. */
- REG_ESPACE, /* regcomp ran out of space */
-};
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/resolv.h b/mdk-stage1/dietlibc/include/resolv.h
deleted file mode 100644
index 4e90799c2..000000000
--- a/mdk-stage1/dietlibc/include/resolv.h
+++ /dev/null
@@ -1 +0,0 @@
-void res_init(void);
diff --git a/mdk-stage1/dietlibc/include/rpc/auth.h b/mdk-stage1/dietlibc/include/rpc/auth.h
deleted file mode 100644
index 4aa7d21ce..000000000
--- a/mdk-stage1/dietlibc/include/rpc/auth.h
+++ /dev/null
@@ -1,213 +0,0 @@
-/* @(#)auth.h 2.3 88/08/07 4.0 RPCSRC; from 1.17 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * auth.h, Authentication interface.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * The data structures are completely opaque to the client. The client
- * is required to pass a AUTH * to routines that create rpc
- * "sessions".
- */
-
-#ifndef _RPC_AUTH_H
-
-#define _RPC_AUTH_H 1
-#include <sys/cdefs.h>
-#include <rpc/xdr.h>
-
-__BEGIN_DECLS
-
-#define MAX_AUTH_BYTES 400
-#define MAXNETNAMELEN 255 /* maximum length of network user's name */
-
-/*
- * Status returned from authentication check
- */
-enum auth_stat {
- AUTH_OK=0,
- /*
- * failed at remote end
- */
- AUTH_BADCRED=1, /* bogus credentials (seal broken) */
- AUTH_REJECTEDCRED=2, /* client should begin new session */
- AUTH_BADVERF=3, /* bogus verifier (seal broken) */
- AUTH_REJECTEDVERF=4, /* verifier expired or was replayed */
- AUTH_TOOWEAK=5, /* rejected due to security reasons */
- /*
- * failed locally
- */
- AUTH_INVALIDRESP=6, /* bogus response verifier */
- AUTH_FAILED=7 /* some unknown reason */
-};
-
-union des_block {
- struct {
- u_int32_t high;
- u_int32_t low;
- } key;
- char c[8];
-};
-typedef union des_block des_block;
-extern bool_t xdr_des_block (XDR *__xdrs, des_block *__blkp) __THROW;
-
-/*
- * Authentication info. Opaque to client.
- */
-struct opaque_auth {
- enum_t oa_flavor; /* flavor of auth */
- caddr_t oa_base; /* address of more auth stuff */
- u_int oa_length; /* not to exceed MAX_AUTH_BYTES */
-};
-
-/*
- * Auth handle, interface to client side authenticators.
- */
-typedef struct AUTH AUTH;
-struct AUTH {
- struct opaque_auth ah_cred;
- struct opaque_auth ah_verf;
- union des_block ah_key;
- struct auth_ops {
- void (*ah_nextverf) (AUTH *);
- int (*ah_marshal) (AUTH *, XDR *); /* nextverf & serialize */
- int (*ah_validate) (AUTH *, struct opaque_auth *);
- /* validate verifier */
- int (*ah_refresh) (AUTH *); /* refresh credentials */
- void (*ah_destroy) (AUTH *); /* destroy this structure */
- } *ah_ops;
- caddr_t ah_private;
-};
-
-
-/*
- * Authentication ops.
- * The ops and the auth handle provide the interface to the authenticators.
- *
- * AUTH *auth;
- * XDR *xdrs;
- * struct opaque_auth verf;
- */
-#define AUTH_NEXTVERF(auth) \
- ((*((auth)->ah_ops->ah_nextverf))(auth))
-#define auth_nextverf(auth) \
- ((*((auth)->ah_ops->ah_nextverf))(auth))
-
-#define AUTH_MARSHALL(auth, xdrs) \
- ((*((auth)->ah_ops->ah_marshal))(auth, xdrs))
-#define auth_marshall(auth, xdrs) \
- ((*((auth)->ah_ops->ah_marshal))(auth, xdrs))
-
-#define AUTH_VALIDATE(auth, verfp) \
- ((*((auth)->ah_ops->ah_validate))((auth), verfp))
-#define auth_validate(auth, verfp) \
- ((*((auth)->ah_ops->ah_validate))((auth), verfp))
-
-#define AUTH_REFRESH(auth) \
- ((*((auth)->ah_ops->ah_refresh))(auth))
-#define auth_refresh(auth) \
- ((*((auth)->ah_ops->ah_refresh))(auth))
-
-#define AUTH_DESTROY(auth) \
- ((*((auth)->ah_ops->ah_destroy))(auth))
-#define auth_destroy(auth) \
- ((*((auth)->ah_ops->ah_destroy))(auth))
-
-
-extern struct opaque_auth _null_auth;
-
-
-/*
- * These are the various implementations of client side authenticators.
- */
-
-/*
- * Unix style authentication
- * AUTH *authunix_create(machname, uid, gid, len, aup_gids)
- * char *machname;
- * int uid;
- * int gid;
- * int len;
- * int *aup_gids;
- */
-extern AUTH *authunix_create (char *__machname,uid_t __uid, gid_t __gid,
- int __len, gid_t *__aup_gids) __THROW;
-extern AUTH *authunix_create_default (void) __THROW;
-extern AUTH *authnone_create (void) __THROW;
-extern AUTH *authdes_create (const char *__servername, u_int __window,
- struct sockaddr *__syncaddr, des_block *__ckey)
- __THROW;
-extern AUTH *authdes_pk_create (const char *, netobj *, u_int,
- struct sockaddr *, des_block *) __THROW;
-
-
-#define AUTH_NONE 0 /* no authentication */
-#define AUTH_NULL 0 /* backward compatibility */
-#define AUTH_SYS 1 /* unix style (uid, gids) */
-#define AUTH_UNIX AUTH_SYS
-#define AUTH_SHORT 2 /* short hand unix style */
-#define AUTH_DES 3 /* des style (encrypted timestamps) */
-#define AUTH_DH AUTH_DES /* Diffie-Hellman (this is DES) */
-#define AUTH_KERB 4 /* kerberos style */
-
-/*
- * Netname manipulating functions
- *
- */
-extern int getnetname (char *) __THROW;
-extern int host2netname (char *, __const char *, __const char *) __THROW;
-extern int user2netname (char *, __const uid_t, __const char *) __THROW;
-extern int netname2user (__const char *, uid_t *, gid_t *, int *, gid_t *)
- __THROW;
-extern int netname2host (__const char *, char *, __const int) __THROW;
-
-/*
- *
- * These routines interface to the keyserv daemon
- *
- */
-extern int key_decryptsession (char *, des_block *) __THROW;
-extern int key_decryptsession_pk (char *, netobj *, des_block *) __THROW;
-extern int key_encryptsession (char *, des_block *) __THROW;
-extern int key_encryptsession_pk (char *, netobj *, des_block *) __THROW;
-extern int key_gendes (des_block *) __THROW;
-extern int key_setsecret (char *) __THROW;
-extern int key_secretkey_is_set (void) __THROW;
-extern int key_get_conv (char *, des_block *) __THROW;
-
-/*
- * XDR an opaque authentication struct.
- */
-extern bool_t xdr_opaque_auth (XDR *, struct opaque_auth *) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/auth.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/auth_des.h b/mdk-stage1/dietlibc/include/rpc/auth_des.h
deleted file mode 100644
index 198b299e7..000000000
--- a/mdk-stage1/dietlibc/include/rpc/auth_des.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* Copyright (C) 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-#ifndef _RPC_AUTH_DES_H
-#define _RPC_AUTH_DES_H 1
-
-#include <sys/cdefs.h>
-#include <rpc/auth.h>
-
-__BEGIN_DECLS
-
-/* There are two kinds of "names": fullnames and nicknames */
-enum authdes_namekind
- {
- ADN_FULLNAME,
- ADN_NICKNAME
- };
-
-/* A fullname contains the network name of the client,
- a conversation key and the window */
-struct authdes_fullname
- {
- char *name; /* network name of client, up to MAXNETNAMELEN */
- des_block key; /* conversation key */
- uint32_t window; /* associated window */
- };
-
-/* A credential */
-struct authdes_cred
- {
- enum authdes_namekind adc_namekind;
- struct authdes_fullname adc_fullname;
- uint32_t adc_nickname;
- };
-
-/* A timeval replacement for !32bit platforms */
-struct rpc_timeval
- {
- uint32_t tv_sec; /* Seconds. */
- uint32_t tv_usec; /* Microseconds. */
- };
-
-/* A des authentication verifier */
-struct authdes_verf
- {
- union
- {
- struct rpc_timeval adv_ctime; /* clear time */
- des_block adv_xtime; /* crypt time */
- }
- adv_time_u;
- uint32_t adv_int_u;
- };
-
-/* des authentication verifier: client variety
-
- adv_timestamp is the current time.
- adv_winverf is the credential window + 1.
- Both are encrypted using the conversation key. */
-#define adv_timestamp adv_time_u.adv_ctime
-#define adv_xtimestamp adv_time_u.adv_xtime
-#define adv_winverf adv_int_u
-
-/* des authentication verifier: server variety
-
- adv_timeverf is the client's timestamp + client's window
- adv_nickname is the server's nickname for the client.
- adv_timeverf is encrypted using the conversation key. */
-#define adv_timeverf adv_time_u.adv_ctime
-#define adv_xtimeverf adv_time_u.adv_xtime
-#define adv_nickname adv_int_u
-
-/* Map a des credential into a unix cred. */
-extern int authdes_getucred (__const struct authdes_cred * __adc,
- uid_t * __uid, gid_t * __gid,
- short *__grouplen, gid_t * __groups) __THROW;
-
-/* Get the public key for NAME and place it in KEY. NAME can only be
- up to MAXNETNAMELEN bytes long and the destination buffer KEY should
- have HEXKEYBYTES + 1 bytes long to fit all characters from the key. */
-extern int getpublickey (__const char *__name, char *__key) __THROW;
-
-/* Get the secret key for NAME and place it in KEY. PASSWD is used to
- decrypt the encrypted key stored in the database. NAME can only be
- up to MAXNETNAMELEN bytes long and the destination buffer KEY
- should have HEXKEYBYTES + 1 bytes long to fit all characters from
- the key. */
-extern int getsecretkey (__const char *__name, char *__key,
- __const char *__passwd) __THROW;
-
-extern int rtime (struct sockaddr_in *__addrp, struct rpc_timeval *__timep,
- struct rpc_timeval *__timeout) __THROW;
-
-__END_DECLS
-
-
-#endif /* rpc/auth_des.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/auth_unix.h b/mdk-stage1/dietlibc/include/rpc/auth_unix.h
deleted file mode 100644
index 7a1bfa9f0..000000000
--- a/mdk-stage1/dietlibc/include/rpc/auth_unix.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* @(#)auth_unix.h 2.2 88/07/29 4.0 RPCSRC; from 1.8 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-/* @(#)auth_unix.h 1.5 86/07/16 SMI */
-
-/*
- * auth_unix.h, Protocol for UNIX style authentication parameters for RPC
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-/*
- * The system is very weak. The client uses no encryption for it
- * credentials and only sends null verifiers. The server sends backs
- * null verifiers or optionally a verifier that suggests a new short hand
- * for the credentials.
- */
-
-#ifndef _RPC_AUTH_UNIX_H
-#define _RPC_AUTH_UNIX_H 1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <rpc/types.h>
-#include <rpc/auth.h>
-#include <rpc/xdr.h>
-
-__BEGIN_DECLS
-
-/* The machine name is part of a credential; it may not exceed 255 bytes */
-#define MAX_MACHINE_NAME 255
-
-/* gids compose part of a credential; there may not be more than 16 of them */
-#define NGRPS 16
-
-/*
- * Unix style credentials.
- */
-struct authunix_parms
- {
- u_long aup_time;
- char *aup_machname;
- uid_t aup_uid;
- gid_t aup_gid;
- u_int aup_len;
- gid_t *aup_gids;
- };
-
-extern bool_t xdr_authunix_parms (XDR *__xdrs, struct authunix_parms *__p)
- __THROW;
-
-/*
- * If a response verifier has flavor AUTH_SHORT,
- * then the body of the response verifier encapsulates the following structure;
- * again it is serialized in the obvious fashion.
- */
-struct short_hand_verf
- {
- struct opaque_auth new_cred;
- };
-
-__END_DECLS
-
-#endif /* rpc/auth_unix.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/clnt.h b/mdk-stage1/dietlibc/include/rpc/clnt.h
deleted file mode 100644
index 60b0fafdf..000000000
--- a/mdk-stage1/dietlibc/include/rpc/clnt.h
+++ /dev/null
@@ -1,421 +0,0 @@
-/* @(#)clnt.h 2.1 88/07/29 4.0 RPCSRC; from 1.31 88/02/08 SMI*/
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * clnt.h - Client side remote procedure call interface.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_CLNT_H
-#define _RPC_CLNT_H 1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <rpc/types.h>
-#include <rpc/auth.h>
-#include <sys/un.h>
-
-__BEGIN_DECLS
-
-/*
- * Rpc calls return an enum clnt_stat. This should be looked at more,
- * since each implementation is required to live with this (implementation
- * independent) list of errors.
- */
-enum clnt_stat {
- RPC_SUCCESS=0, /* call succeeded */
- /*
- * local errors
- */
- RPC_CANTENCODEARGS=1, /* can't encode arguments */
- RPC_CANTDECODERES=2, /* can't decode results */
- RPC_CANTSEND=3, /* failure in sending call */
- RPC_CANTRECV=4, /* failure in receiving result */
- RPC_TIMEDOUT=5, /* call timed out */
- /*
- * remote errors
- */
- RPC_VERSMISMATCH=6, /* rpc versions not compatible */
- RPC_AUTHERROR=7, /* authentication error */
- RPC_PROGUNAVAIL=8, /* program not available */
- RPC_PROGVERSMISMATCH=9, /* program version mismatched */
- RPC_PROCUNAVAIL=10, /* procedure unavailable */
- RPC_CANTDECODEARGS=11, /* decode arguments error */
- RPC_SYSTEMERROR=12, /* generic "other problem" */
- RPC_NOBROADCAST = 21, /* Broadcasting not supported */
- /*
- * callrpc & clnt_create errors
- */
- RPC_UNKNOWNHOST=13, /* unknown host name */
- RPC_UNKNOWNPROTO=17, /* unknown protocol */
- RPC_UNKNOWNADDR = 19, /* Remote address unknown */
-
- /*
- * rpcbind errors
- */
- RPC_RPCBFAILURE=14, /* portmapper failed in its call */
-#define RPC_PMAPFAILURE RPC_RPCBFAILURE
- RPC_PROGNOTREGISTERED=15, /* remote program is not registered */
- RPC_N2AXLATEFAILURE = 22, /* Name to addr translation failed */
- /*
- * unspecified error
- */
- RPC_FAILED=16,
- RPC_INTR=18,
- RPC_TLIERROR=20,
- RPC_UDERROR=23,
- /*
- * asynchronous errors
- */
- RPC_INPROGRESS = 24,
- RPC_STALERACHANDLE = 25
-};
-
-
-/*
- * Error info.
- */
-struct rpc_err {
- enum clnt_stat re_status;
- union {
- int RE_errno; /* related system error */
- enum auth_stat RE_why; /* why the auth error occurred */
- struct {
- u_long low; /* lowest verion supported */
- u_long high; /* highest verion supported */
- } RE_vers;
- struct { /* maybe meaningful if RPC_FAILED */
- long s1;
- long s2;
- } RE_lb; /* life boot & debugging only */
- } ru;
-#define re_errno ru.RE_errno
-#define re_why ru.RE_why
-#define re_vers ru.RE_vers
-#define re_lb ru.RE_lb
-};
-
-
-/*
- * Client rpc handle.
- * Created by individual implementations, see e.g. rpc_udp.c.
- * Client is responsible for initializing auth, see e.g. auth_none.c.
- */
-typedef struct CLIENT CLIENT;
-struct CLIENT {
- AUTH *cl_auth; /* authenticator */
- struct clnt_ops {
- enum clnt_stat (*cl_call) (CLIENT *, u_long, xdrproc_t, caddr_t, xdrproc_t,
- caddr_t, struct timeval);
- /* call remote procedure */
- void (*cl_abort) (void); /* abort a call */
- void (*cl_geterr) (CLIENT *, struct rpc_err *);
- /* get specific error code */
- bool_t (*cl_freeres) (CLIENT *, xdrproc_t, caddr_t);
- /* frees results */
- void (*cl_destroy) (CLIENT *); /* destroy this structure */
- bool_t (*cl_control) (CLIENT *, int, char *);
- /* the ioctl() of rpc */
- } *cl_ops;
- caddr_t cl_private; /* private stuff */
-};
-
-
-/*
- * client side rpc interface ops
- *
- * Parameter types are:
- *
- */
-
-/*
- * enum clnt_stat
- * CLNT_CALL(rh, proc, xargs, argsp, xres, resp, timeout)
- * CLIENT *rh;
- * u_long proc;
- * xdrproc_t xargs;
- * caddr_t argsp;
- * xdrproc_t xres;
- * caddr_t resp;
- * struct timeval timeout;
- */
-#define CLNT_CALL(rh, proc, xargs, argsp, xres, resp, secs) \
- ((*(rh)->cl_ops->cl_call)(rh, proc, xargs, argsp, xres, resp, secs))
-#define clnt_call(rh, proc, xargs, argsp, xres, resp, secs) \
- ((*(rh)->cl_ops->cl_call)(rh, proc, xargs, argsp, xres, resp, secs))
-
-/*
- * void
- * CLNT_ABORT(rh);
- * CLIENT *rh;
- */
-#define CLNT_ABORT(rh) ((*(rh)->cl_ops->cl_abort)(rh))
-#define clnt_abort(rh) ((*(rh)->cl_ops->cl_abort)(rh))
-
-/*
- * struct rpc_err
- * CLNT_GETERR(rh);
- * CLIENT *rh;
- */
-#define CLNT_GETERR(rh,errp) ((*(rh)->cl_ops->cl_geterr)(rh, errp))
-#define clnt_geterr(rh,errp) ((*(rh)->cl_ops->cl_geterr)(rh, errp))
-
-
-/*
- * bool_t
- * CLNT_FREERES(rh, xres, resp);
- * CLIENT *rh;
- * xdrproc_t xres;
- * caddr_t resp;
- */
-#define CLNT_FREERES(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
-#define clnt_freeres(rh,xres,resp) ((*(rh)->cl_ops->cl_freeres)(rh,xres,resp))
-
-/*
- * bool_t
- * CLNT_CONTROL(cl, request, info)
- * CLIENT *cl;
- * u_int request;
- * char *info;
- */
-#define CLNT_CONTROL(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
-#define clnt_control(cl,rq,in) ((*(cl)->cl_ops->cl_control)(cl,rq,in))
-
-/*
- * control operations that apply to all transports
- *
- * Note: options marked XXX are no-ops in this implementation of RPC.
- * The are present in TI-RPC but can't be implemented here since they
- * depend on the presence of STREAMS/TLI, which we don't have.
- */
-#define CLSET_TIMEOUT 1 /* set timeout (timeval) */
-#define CLGET_TIMEOUT 2 /* get timeout (timeval) */
-#define CLGET_SERVER_ADDR 3 /* get server's address (sockaddr) */
-#define CLGET_FD 6 /* get connections file descriptor */
-#define CLGET_SVC_ADDR 7 /* get server's address (netbuf) XXX */
-#define CLSET_FD_CLOSE 8 /* close fd while clnt_destroy */
-#define CLSET_FD_NCLOSE 9 /* Do not close fd while clnt_destroy*/
-#define CLGET_XID 10 /* Get xid */
-#define CLSET_XID 11 /* Set xid */
-#define CLGET_VERS 12 /* Get version number */
-#define CLSET_VERS 13 /* Set version number */
-#define CLGET_PROG 14 /* Get program number */
-#define CLSET_PROG 15 /* Set program number */
-#define CLSET_SVC_ADDR 16 /* get server's address (netbuf) XXX */
-#define CLSET_PUSH_TIMOD 17 /* push timod if not already present XXX */
-#define CLSET_POP_TIMOD 18 /* pop timod XXX */
-/*
- * Connectionless only control operations
- */
-#define CLSET_RETRY_TIMEOUT 4 /* set retry timeout (timeval) */
-#define CLGET_RETRY_TIMEOUT 5 /* get retry timeout (timeval) */
-
-/*
- * void
- * CLNT_DESTROY(rh);
- * CLIENT *rh;
- */
-#define CLNT_DESTROY(rh) ((*(rh)->cl_ops->cl_destroy)(rh))
-#define clnt_destroy(rh) ((*(rh)->cl_ops->cl_destroy)(rh))
-
-
-/*
- * RPCTEST is a test program which is accessible on every rpc
- * transport/port. It is used for testing, performance evaluation,
- * and network administration.
- */
-
-#define RPCTEST_PROGRAM ((u_long)1)
-#define RPCTEST_VERSION ((u_long)1)
-#define RPCTEST_NULL_PROC ((u_long)2)
-#define RPCTEST_NULL_BATCH_PROC ((u_long)3)
-
-/*
- * By convention, procedure 0 takes null arguments and returns them
- */
-
-#define NULLPROC ((u_long)0)
-
-/*
- * Below are the client handle creation routines for the various
- * implementations of client side rpc. They can return NULL if a
- * creation failure occurs.
- */
-
-/*
- * Memory based rpc (for speed check and testing)
- * CLIENT *
- * clntraw_create(prog, vers)
- * u_long prog;
- * u_long vers;
- */
-extern CLIENT *clntraw_create (__const u_long __prog, __const u_long __vers)
- __THROW;
-
-
-/*
- * Generic client creation routine. Supported protocols are "udp", "tcp" and
- * "unix"
- * CLIENT *
- * clnt_create(host, prog, vers, prot)
- * char *host; -- hostname
- * u_long prog; -- program number
- * u_ong vers; -- version number
- * char *prot; -- protocol
- */
-extern CLIENT *clnt_create (__const char *__host, __const u_long __prog,
- __const u_long __vers, __const char *__prot)
- __THROW;
-
-
-/*
- * TCP based rpc
- * CLIENT *
- * clnttcp_create(raddr, prog, vers, sockp, sendsz, recvsz)
- * struct sockaddr_in *raddr;
- * u_long prog;
- * u_long version;
- * register int *sockp;
- * u_int sendsz;
- * u_int recvsz;
- */
-extern CLIENT *clnttcp_create (struct sockaddr_in *__raddr, u_long __prog,
- u_long __version, int *__sockp, u_int __sendsz,
- u_int __recvsz) __THROW;
-
-/*
- * UDP based rpc.
- * CLIENT *
- * clntudp_create(raddr, program, version, wait, sockp)
- * struct sockaddr_in *raddr;
- * u_long program;
- * u_long version;
- * struct timeval wait_resend;
- * int *sockp;
- *
- * Same as above, but you specify max packet sizes.
- * CLIENT *
- * clntudp_bufcreate(raddr, program, version, wait, sockp, sendsz, recvsz)
- * struct sockaddr_in *raddr;
- * u_long program;
- * u_long version;
- * struct timeval wait_resend;
- * int *sockp;
- * u_int sendsz;
- * u_int recvsz;
- */
-extern CLIENT *clntudp_create (struct sockaddr_in *__raddr, u_long __program,
- u_long __version, struct timeval __wait_resend,
- int *__sockp) __THROW;
-extern CLIENT *clntudp_bufcreate (struct sockaddr_in *__raddr,
- u_long __program, u_long __version,
- struct timeval __wait_resend, int *__sockp,
- u_int __sendsz, u_int __recvsz) __THROW;
-
-
-
-
-/*
- * AF_UNIX based rpc
- * CLIENT *
- * clntunix_create(raddr, prog, vers, sockp, sendsz, recvsz)
- * struct sockaddr_un *raddr;
- * u_long prog;
- * u_long version;
- * register int *sockp;
- * u_int sendsz;
- * u_int recvsz;
- */
-extern CLIENT *clntunix_create (struct sockaddr_un *__raddr, u_long __program,
- u_long __version, int *__sockp,
- u_int __sendsz, u_int __recvsz) __THROW;
-
-
-extern int callrpc (__const char *__host, __const u_long __prognum,
- __const u_long __versnum, __const u_long __procnum,
- __const xdrproc_t __inproc, __const char *__in,
- __const xdrproc_t __outproc, char *__out) __THROW;
-extern int _rpc_dtablesize (void) __THROW;
-
-/*
- * Print why creation failed
- */
-extern void clnt_pcreateerror (__const char *__msg) __THROW; /* stderr */
-extern char *clnt_spcreateerror(__const char *__msg) __THROW; /* string */
-
-/*
- * Like clnt_perror(), but is more verbose in its output
- */
-extern void clnt_perrno (enum clnt_stat __num) __THROW; /* stderr */
-
-/*
- * Print an English error message, given the client error code
- */
-extern void clnt_perror (CLIENT *__clnt, __const char *__msg) __THROW;
- /* stderr */
-extern char *clnt_sperror (CLIENT *__clnt, __const char *__msg) __THROW;
- /* string */
-
-/*
- * If a creation fails, the following allows the user to figure out why.
- */
-struct rpc_createerr {
- enum clnt_stat cf_stat;
- struct rpc_err cf_error; /* useful when cf_stat == RPC_PMAPFAILURE */
-};
-
-extern struct rpc_createerr rpc_createerr;
-
-
-
-/*
- * Copy error message to buffer.
- */
-extern char *clnt_sperrno (enum clnt_stat __num) __THROW; /* string */
-
-/*
- * get the port number on the host for the rpc program,version and proto
- */
-extern int getrpcport (__const char * __host, u_long __prognum,
- u_long __versnum, u_int proto) __THROW;
-
-/*
- * get the local host's IP address without consulting
- * name service library functions
- */
-extern void get_myaddress (struct sockaddr_in *) __THROW;
-
-#define UDPMSGSIZE 8800 /* rpc imposed limit on udp msg size */
-#define RPCSMALLMSGSIZE 400 /* a more reasonable packet size */
-
-__END_DECLS
-
-#endif /* rpc/clnt.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/des_crypt.h b/mdk-stage1/dietlibc/include/rpc/des_crypt.h
deleted file mode 100644
index 6a65887d3..000000000
--- a/mdk-stage1/dietlibc/include/rpc/des_crypt.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * @(#)des_crypt.h 2.1 88/08/11 4.0 RPCSRC; from 1.4 88/02/08 (C) 1986 SMI
- *
- * des_crypt.h, des library routine interface
- * Copyright (C) 1986, Sun Microsystems, Inc.
- */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-#ifndef __DES_CRYPT_H__
-#define __DES_CRYPT_H__ 1
-
-#include <features.h>
-
-__BEGIN_DECLS
-
-#define DES_MAXDATA 8192 /* max bytes encrypted in one call */
-#define DES_DIRMASK (1 << 0)
-#define DES_ENCRYPT (0*DES_DIRMASK) /* Encrypt */
-#define DES_DECRYPT (1*DES_DIRMASK) /* Decrypt */
-
-
-#define DES_DEVMASK (1 << 1)
-#define DES_HW (0*DES_DEVMASK) /* Use hardware device */
-#define DES_SW (1*DES_DEVMASK) /* Use software device */
-
-
-#define DESERR_NONE 0 /* succeeded */
-#define DESERR_NOHWDEVICE 1 /* succeeded, but hw device not available */
-#define DESERR_HWERROR 2 /* failed, hardware/driver error */
-#define DESERR_BADPARAM 3 /* failed, bad parameter to call */
-
-#define DES_FAILED(err) \
- ((err) > DESERR_NOHWDEVICE)
-
-/*
- * cbc_crypt()
- * ecb_crypt()
- *
- * Encrypt (or decrypt) len bytes of a buffer buf.
- * The length must be a multiple of eight.
- * The key should have odd parity in the low bit of each byte.
- * ivec is the input vector, and is updated to the new one (cbc only).
- * The mode is created by oring together the appropriate parameters.
- * DESERR_NOHWDEVICE is returned if DES_HW was specified but
- * there was no hardware to do it on (the data will still be
- * encrypted though, in software).
- */
-
-
-/*
- * Cipher Block Chaining mode
- */
-extern int cbc_crypt (char *__key, char *__buf, unsigned __len,
- unsigned __mode, char *__ivec) __THROW;
-
-/*
- * Electronic Code Book mode
- */
-extern int ecb_crypt (char *__key, char *__buf, unsigned __len,
- unsigned __mode) __THROW;
-
-/*
- * Set des parity for a key.
- * DES parity is odd and in the low bit of each byte
- */
-extern void des_setparity (char *__key) __THROW;
-
-__END_DECLS
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/rpc/key_prot.h b/mdk-stage1/dietlibc/include/rpc/key_prot.h
deleted file mode 100644
index 3e2eb7208..000000000
--- a/mdk-stage1/dietlibc/include/rpc/key_prot.h
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Please do not edit this file.
- * It was generated using rpcgen.
- */
-
-#ifndef _KEY_PROT_H_RPCGEN
-#define _KEY_PROT_H_RPCGEN
-
-#include <rpc/rpc.h>
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if 0
-#pragma ident "@(#)key_prot.x 1.7 94/04/29 SMI"
-#endif
-/* Copyright (c) 1990, 1991 Sun Microsystems, Inc. */
-
-/*
- * Compiled from key_prot.x using rpcgen.
- * DO NOT EDIT THIS FILE!
- * This is NOT source code!
- */
-#define PROOT 3
-#define HEXMODULUS "d4a0ba0250b6fd2ec626e7efd637df76c716e22d0944b88b"
-#define HEXKEYBYTES 48
-#define KEYSIZE 192
-#define KEYBYTES 24
-#define KEYCHECKSUMSIZE 16
-
-enum keystatus {
- KEY_SUCCESS = 0,
- KEY_NOSECRET = 1,
- KEY_UNKNOWN = 2,
- KEY_SYSTEMERR = 3,
-};
-typedef enum keystatus keystatus;
-#ifdef __cplusplus
-extern "C" bool_t xdr_keystatus(XDR *, keystatus*);
-#elif __STDC__
-extern bool_t xdr_keystatus(XDR *, keystatus*);
-#else /* Old Style C */
-bool_t xdr_keystatus();
-#endif /* Old Style C */
-
-
-typedef char keybuf[HEXKEYBYTES];
-#ifdef __cplusplus
-extern "C" bool_t xdr_keybuf(XDR *, keybuf);
-#elif __STDC__
-extern bool_t xdr_keybuf(XDR *, keybuf);
-#else /* Old Style C */
-bool_t xdr_keybuf();
-#endif /* Old Style C */
-
-
-typedef char *netnamestr;
-#ifdef __cplusplus
-extern "C" bool_t xdr_netnamestr(XDR *, netnamestr*);
-#elif __STDC__
-extern bool_t xdr_netnamestr(XDR *, netnamestr*);
-#else /* Old Style C */
-bool_t xdr_netnamestr();
-#endif /* Old Style C */
-
-
-struct cryptkeyarg {
- netnamestr remotename;
- des_block deskey;
-};
-typedef struct cryptkeyarg cryptkeyarg;
-#ifdef __cplusplus
-extern "C" bool_t xdr_cryptkeyarg(XDR *, cryptkeyarg*);
-#elif __STDC__
-extern bool_t xdr_cryptkeyarg(XDR *, cryptkeyarg*);
-#else /* Old Style C */
-bool_t xdr_cryptkeyarg();
-#endif /* Old Style C */
-
-
-struct cryptkeyarg2 {
- netnamestr remotename;
- netobj remotekey;
- des_block deskey;
-};
-typedef struct cryptkeyarg2 cryptkeyarg2;
-#ifdef __cplusplus
-extern "C" bool_t xdr_cryptkeyarg2(XDR *, cryptkeyarg2*);
-#elif __STDC__
-extern bool_t xdr_cryptkeyarg2(XDR *, cryptkeyarg2*);
-#else /* Old Style C */
-bool_t xdr_cryptkeyarg2();
-#endif /* Old Style C */
-
-
-struct cryptkeyres {
- keystatus status;
- union {
- des_block deskey;
- } cryptkeyres_u;
-};
-typedef struct cryptkeyres cryptkeyres;
-#ifdef __cplusplus
-extern "C" bool_t xdr_cryptkeyres(XDR *, cryptkeyres*);
-#elif __STDC__
-extern bool_t xdr_cryptkeyres(XDR *, cryptkeyres*);
-#else /* Old Style C */
-bool_t xdr_cryptkeyres();
-#endif /* Old Style C */
-
-#define MAXGIDS 16
-
-struct unixcred {
- u_int uid;
- u_int gid;
- struct {
- u_int gids_len;
- u_int *gids_val;
- } gids;
-};
-typedef struct unixcred unixcred;
-#ifdef __cplusplus
-extern "C" bool_t xdr_unixcred(XDR *, unixcred*);
-#elif __STDC__
-extern bool_t xdr_unixcred(XDR *, unixcred*);
-#else /* Old Style C */
-bool_t xdr_unixcred();
-#endif /* Old Style C */
-
-
-struct getcredres {
- keystatus status;
- union {
- unixcred cred;
- } getcredres_u;
-};
-typedef struct getcredres getcredres;
-#ifdef __cplusplus
-extern "C" bool_t xdr_getcredres(XDR *, getcredres*);
-#elif __STDC__
-extern bool_t xdr_getcredres(XDR *, getcredres*);
-#else /* Old Style C */
-bool_t xdr_getcredres();
-#endif /* Old Style C */
-
-
-struct key_netstarg {
- keybuf st_priv_key;
- keybuf st_pub_key;
- netnamestr st_netname;
-};
-typedef struct key_netstarg key_netstarg;
-#ifdef __cplusplus
-extern "C" bool_t xdr_key_netstarg(XDR *, key_netstarg*);
-#elif __STDC__
-extern bool_t xdr_key_netstarg(XDR *, key_netstarg*);
-#else /* Old Style C */
-bool_t xdr_key_netstarg();
-#endif /* Old Style C */
-
-
-struct key_netstres {
- keystatus status;
- union {
- key_netstarg knet;
- } key_netstres_u;
-};
-typedef struct key_netstres key_netstres;
-#ifdef __cplusplus
-extern "C" bool_t xdr_key_netstres(XDR *, key_netstres*);
-#elif __STDC__
-extern bool_t xdr_key_netstres(XDR *, key_netstres*);
-#else /* Old Style C */
-bool_t xdr_key_netstres();
-#endif /* Old Style C */
-
-
-#ifndef opaque
-#define opaque char
-#endif
-
-
-#define KEY_PROG ((u_long)100029)
-#define KEY_VERS ((u_long)1)
-
-#ifdef __cplusplus
-#define KEY_SET ((u_long)1)
-extern "C" keystatus * key_set_1(opaque *, CLIENT *);
-extern "C" keystatus * key_set_1_svc(opaque *, struct svc_req *);
-#define KEY_ENCRYPT ((u_long)2)
-extern "C" cryptkeyres * key_encrypt_1(cryptkeyarg *, CLIENT *);
-extern "C" cryptkeyres * key_encrypt_1_svc(cryptkeyarg *, struct svc_req *);
-#define KEY_DECRYPT ((u_long)3)
-extern "C" cryptkeyres * key_decrypt_1(cryptkeyarg *, CLIENT *);
-extern "C" cryptkeyres * key_decrypt_1_svc(cryptkeyarg *, struct svc_req *);
-#define KEY_GEN ((u_long)4)
-extern "C" des_block * key_gen_1(void *, CLIENT *);
-extern "C" des_block * key_gen_1_svc(void *, struct svc_req *);
-#define KEY_GETCRED ((u_long)5)
-extern "C" getcredres * key_getcred_1(netnamestr *, CLIENT *);
-extern "C" getcredres * key_getcred_1_svc(netnamestr *, struct svc_req *);
-
-#elif __STDC__
-#define KEY_SET ((u_long)1)
-extern keystatus * key_set_1(opaque *, CLIENT *);
-extern keystatus * key_set_1_svc(opaque *, struct svc_req *);
-#define KEY_ENCRYPT ((u_long)2)
-extern cryptkeyres * key_encrypt_1(cryptkeyarg *, CLIENT *);
-extern cryptkeyres * key_encrypt_1_svc(cryptkeyarg *, struct svc_req *);
-#define KEY_DECRYPT ((u_long)3)
-extern cryptkeyres * key_decrypt_1(cryptkeyarg *, CLIENT *);
-extern cryptkeyres * key_decrypt_1_svc(cryptkeyarg *, struct svc_req *);
-#define KEY_GEN ((u_long)4)
-extern des_block * key_gen_1(void *, CLIENT *);
-extern des_block * key_gen_1_svc(void *, struct svc_req *);
-#define KEY_GETCRED ((u_long)5)
-extern getcredres * key_getcred_1(netnamestr *, CLIENT *);
-extern getcredres * key_getcred_1_svc(netnamestr *, struct svc_req *);
-
-#else /* Old Style C */
-#define KEY_SET ((u_long)1)
-extern keystatus * key_set_1();
-extern keystatus * key_set_1_svc();
-#define KEY_ENCRYPT ((u_long)2)
-extern cryptkeyres * key_encrypt_1();
-extern cryptkeyres * key_encrypt_1_svc();
-#define KEY_DECRYPT ((u_long)3)
-extern cryptkeyres * key_decrypt_1();
-extern cryptkeyres * key_decrypt_1_svc();
-#define KEY_GEN ((u_long)4)
-extern des_block * key_gen_1();
-extern des_block * key_gen_1_svc();
-#define KEY_GETCRED ((u_long)5)
-extern getcredres * key_getcred_1();
-extern getcredres * key_getcred_1_svc();
-#endif /* Old Style C */
-#define KEY_VERS2 ((u_long)2)
-
-#ifdef __cplusplus
-extern "C" keystatus * key_set_2(opaque *, CLIENT *);
-extern "C" keystatus * key_set_2_svc(opaque *, struct svc_req *);
-extern "C" cryptkeyres * key_encrypt_2(cryptkeyarg *, CLIENT *);
-extern "C" cryptkeyres * key_encrypt_2_svc(cryptkeyarg *, struct svc_req *);
-extern "C" cryptkeyres * key_decrypt_2(cryptkeyarg *, CLIENT *);
-extern "C" cryptkeyres * key_decrypt_2_svc(cryptkeyarg *, struct svc_req *);
-extern "C" des_block * key_gen_2(void *, CLIENT *);
-extern "C" des_block * key_gen_2_svc(void *, struct svc_req *);
-extern "C" getcredres * key_getcred_2(netnamestr *, CLIENT *);
-extern "C" getcredres * key_getcred_2_svc(netnamestr *, struct svc_req *);
-#define KEY_ENCRYPT_PK ((u_long)6)
-extern "C" cryptkeyres * key_encrypt_pk_2(cryptkeyarg2 *, CLIENT *);
-extern "C" cryptkeyres * key_encrypt_pk_2_svc(cryptkeyarg2 *, struct svc_req *);
-#define KEY_DECRYPT_PK ((u_long)7)
-extern "C" cryptkeyres * key_decrypt_pk_2(cryptkeyarg2 *, CLIENT *);
-extern "C" cryptkeyres * key_decrypt_pk_2_svc(cryptkeyarg2 *, struct svc_req *);
-#define KEY_NET_PUT ((u_long)8)
-extern "C" keystatus * key_net_put_2(key_netstarg *, CLIENT *);
-extern "C" keystatus * key_net_put_2_svc(key_netstarg *, struct svc_req *);
-#define KEY_NET_GET ((u_long)9)
-extern "C" key_netstres * key_net_get_2(void *, CLIENT *);
-extern "C" key_netstres * key_net_get_2_svc(void *, struct svc_req *);
-#define KEY_GET_CONV ((u_long)10)
-extern "C" cryptkeyres * key_get_conv_2(opaque *, CLIENT *);
-extern "C" cryptkeyres * key_get_conv_2_svc(opaque *, struct svc_req *);
-
-#elif __STDC__
-extern keystatus * key_set_2(opaque *, CLIENT *);
-extern keystatus * key_set_2_svc(opaque *, struct svc_req *);
-extern cryptkeyres * key_encrypt_2(cryptkeyarg *, CLIENT *);
-extern cryptkeyres * key_encrypt_2_svc(cryptkeyarg *, struct svc_req *);
-extern cryptkeyres * key_decrypt_2(cryptkeyarg *, CLIENT *);
-extern cryptkeyres * key_decrypt_2_svc(cryptkeyarg *, struct svc_req *);
-extern des_block * key_gen_2(void *, CLIENT *);
-extern des_block * key_gen_2_svc(void *, struct svc_req *);
-extern getcredres * key_getcred_2(netnamestr *, CLIENT *);
-extern getcredres * key_getcred_2_svc(netnamestr *, struct svc_req *);
-#define KEY_ENCRYPT_PK ((u_long)6)
-extern cryptkeyres * key_encrypt_pk_2(cryptkeyarg2 *, CLIENT *);
-extern cryptkeyres * key_encrypt_pk_2_svc(cryptkeyarg2 *, struct svc_req *);
-#define KEY_DECRYPT_PK ((u_long)7)
-extern cryptkeyres * key_decrypt_pk_2(cryptkeyarg2 *, CLIENT *);
-extern cryptkeyres * key_decrypt_pk_2_svc(cryptkeyarg2 *, struct svc_req *);
-#define KEY_NET_PUT ((u_long)8)
-extern keystatus * key_net_put_2(key_netstarg *, CLIENT *);
-extern keystatus * key_net_put_2_svc(key_netstarg *, struct svc_req *);
-#define KEY_NET_GET ((u_long)9)
-extern key_netstres * key_net_get_2(void *, CLIENT *);
-extern key_netstres * key_net_get_2_svc(void *, struct svc_req *);
-#define KEY_GET_CONV ((u_long)10)
-extern cryptkeyres * key_get_conv_2(opaque *, CLIENT *);
-extern cryptkeyres * key_get_conv_2_svc(opaque *, struct svc_req *);
-
-#else /* Old Style C */
-extern keystatus * key_set_2();
-extern keystatus * key_set_2_svc();
-extern cryptkeyres * key_encrypt_2();
-extern cryptkeyres * key_encrypt_2_svc();
-extern cryptkeyres * key_decrypt_2();
-extern cryptkeyres * key_decrypt_2_svc();
-extern des_block * key_gen_2();
-extern des_block * key_gen_2_svc();
-extern getcredres * key_getcred_2();
-extern getcredres * key_getcred_2_svc();
-#define KEY_ENCRYPT_PK ((u_long)6)
-extern cryptkeyres * key_encrypt_pk_2();
-extern cryptkeyres * key_encrypt_pk_2_svc();
-#define KEY_DECRYPT_PK ((u_long)7)
-extern cryptkeyres * key_decrypt_pk_2();
-extern cryptkeyres * key_decrypt_pk_2_svc();
-#define KEY_NET_PUT ((u_long)8)
-extern keystatus * key_net_put_2();
-extern keystatus * key_net_put_2_svc();
-#define KEY_NET_GET ((u_long)9)
-extern key_netstres * key_net_get_2();
-extern key_netstres * key_net_get_2_svc();
-#define KEY_GET_CONV ((u_long)10)
-extern cryptkeyres * key_get_conv_2();
-extern cryptkeyres * key_get_conv_2_svc();
-#endif /* Old Style C */
-
-#endif /* !_KEY_PROT_H_RPCGEN */
diff --git a/mdk-stage1/dietlibc/include/rpc/netdb.h b/mdk-stage1/dietlibc/include/rpc/netdb.h
deleted file mode 100644
index da4bddfc4..000000000
--- a/mdk-stage1/dietlibc/include/rpc/netdb.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* @(#)netdb.h 2.1 88/07/29 3.9 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-/* @(#)rpc.h 1.8 87/07/24 SMI */
-
-/* Cleaned up for GNU C library roland@gnu.ai.mit.edu:
- added multiple inclusion protection and use of <sys/cdefs.h>.
- In GNU this file is #include'd by <netdb.h>. */
-
-#ifndef _RPC_NETDB_H
-#define _RPC_NETDB_H 1
-
-#include <sys/cdefs.h>
-
-#define __need_size_t
-#include <stddef.h>
-
-__BEGIN_DECLS
-
-struct rpcent
-{
- char *r_name; /* Name of server for this rpc program. */
- char **r_aliases; /* Alias list. */
- int r_number; /* RPC program number. */
-};
-
-extern void setrpcent (int __stayopen) __THROW;
-extern void endrpcent (void) __THROW;
-extern struct rpcent *getrpcbyname (__const char *__name) __THROW;
-extern struct rpcent *getrpcbynumber (int __number) __THROW;
-extern struct rpcent *getrpcent (void) __THROW;
-
-#ifdef __USE_MISC
-extern int getrpcbyname_r (__const char *__name, struct rpcent *__result_buf,
- char *__buffer, size_t __buflen,
- struct rpcent **__result) __THROW;
-
-extern int getrpcbynumber_r (int __number, struct rpcent *__result_buf,
- char *__buffer, size_t __buflen,
- struct rpcent **__result) __THROW;
-
-extern int getrpcent_r (struct rpcent *__result_buf, char *__buffer,
- size_t __buflen, struct rpcent **__result) __THROW;
-#endif
-
-__END_DECLS
-
-#endif /* rpc/netdb.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/pmap_clnt.h b/mdk-stage1/dietlibc/include/rpc/pmap_clnt.h
deleted file mode 100644
index 68bc8d8ec..000000000
--- a/mdk-stage1/dietlibc/include/rpc/pmap_clnt.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* @(#)pmap_clnt.h 2.1 88/07/29 4.0 RPCSRC; from 1.11 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * pmap_clnt.h
- * Supplies C routines to get to portmap services.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_PMAP_CLNT_H
-#define _RPC_PMAP_CLNT_H 1
-
-#include <sys/cdefs.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/clnt.h>
-
-__BEGIN_DECLS
-
-typedef bool_t (*resultproc_t) (caddr_t resp, struct sockaddr_in *raddr);
-
-/*
- * Usage:
- * success = pmap_set(program, version, protocol, port);
- * success = pmap_unset(program, version);
- * port = pmap_getport(address, program, version, protocol);
- * head = pmap_getmaps(address);
- * clnt_stat = pmap_rmtcall(address, program, version, procedure,
- * xdrargs, argsp, xdrres, resp, tout, port_ptr)
- * (works for udp only.)
- * clnt_stat = clnt_broadcast(program, version, procedure,
- * xdrargs, argsp, xdrres, resp, eachresult)
- * (like pmap_rmtcall, except the call is broadcasted to all
- * locally connected nets. For each valid response received,
- * the procedure eachresult is called. Its form is:
- * done = eachresult(resp, raddr)
- * bool_t done;
- * caddr_t resp;
- * struct sockaddr_in raddr;
- * where resp points to the results of the call and raddr is the
- * address if the responder to the broadcast.
- */
-
-extern bool_t pmap_set (__const u_long __program, __const u_long __vers,
- int __protocol, u_short __port) __THROW;
-extern bool_t pmap_unset (__const u_long __program, __const u_long __vers)
- __THROW;
-extern struct pmaplist *pmap_getmaps (struct sockaddr_in *__address) __THROW;
-extern enum clnt_stat pmap_rmtcall (struct sockaddr_in *__addr,
- __const u_long __prog,
- __const u_long __vers,
- __const u_long __proc,
- xdrproc_t __xdrargs,
- caddr_t __argsp, xdrproc_t __xdrres,
- caddr_t __resp, struct timeval __tout,
- u_long *__port_ptr) __THROW;
-extern enum clnt_stat clnt_broadcast (__const u_long __prog,
- __const u_long __vers,
- __const u_long __proc, xdrproc_t __xargs,
- caddr_t __argsp, xdrproc_t __xresults,
- caddr_t __resultsp,
- resultproc_t __eachresult) __THROW;
-extern u_short pmap_getport (struct sockaddr_in *__address,
- __const u_long __program,
- __const u_long __version, u_int __protocol)
- __THROW;
-
-__END_DECLS
-
-#endif /* rpc/pmap_clnt.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/pmap_prot.h b/mdk-stage1/dietlibc/include/rpc/pmap_prot.h
deleted file mode 100644
index fd7fb8e7e..000000000
--- a/mdk-stage1/dietlibc/include/rpc/pmap_prot.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* @(#)pmap_prot.h 2.1 88/07/29 4.0 RPCSRC; from 1.14 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * pmap_prot.h
- * Protocol for the local binder service, or pmap.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_PMAP_PROT_H
-#define _RPC_PMAP_PROT_H 1
-
-#include <sys/cdefs.h>
-
-#include <rpc/xdr.h>
-
-__BEGIN_DECLS
-
-/* The following procedures are supported by the protocol:
- *
- * PMAPPROC_NULL() returns ()
- * takes nothing, returns nothing
- *
- * PMAPPROC_SET(struct pmap) returns (bool_t)
- * TRUE is success, FALSE is failure. Registers the tuple
- * [prog, vers, prot, port].
- *
- * PMAPPROC_UNSET(struct pmap) returns (bool_t)
- * TRUE is success, FALSE is failure. Un-registers pair
- * [prog, vers]. prot and port are ignored.
- *
- * PMAPPROC_GETPORT(struct pmap) returns (long unsigned).
- * 0 is failure. Otherwise returns the port number where the pair
- * [prog, vers] is registered. It may lie!
- *
- * PMAPPROC_DUMP() RETURNS (struct pmaplist *)
- *
- * PMAPPROC_CALLIT(unsigned, unsigned, unsigned, string<>)
- * RETURNS (port, string<>);
- * usage: encapsulatedresults = PMAPPROC_CALLIT(prog, vers, proc, encapsulatedargs);
- * Calls the procedure on the local machine. If it is not registered,
- * this procedure is quite; ie it does not return error information!!!
- * This procedure only is supported on rpc/udp and calls via
- * rpc/udp. This routine only passes null authentication parameters.
- * This file has no interface to xdr routines for PMAPPROC_CALLIT.
- *
- * The service supports remote procedure calls on udp/ip or tcp/ip socket 111.
- */
-
-#define PMAPPORT ((u_short)111)
-#define PMAPPROG ((u_long)100000)
-#define PMAPVERS ((u_long)2)
-#define PMAPVERS_PROTO ((u_long)2)
-#define PMAPVERS_ORIG ((u_long)1)
-#define PMAPPROC_NULL ((u_long)0)
-#define PMAPPROC_SET ((u_long)1)
-#define PMAPPROC_UNSET ((u_long)2)
-#define PMAPPROC_GETPORT ((u_long)3)
-#define PMAPPROC_DUMP ((u_long)4)
-#define PMAPPROC_CALLIT ((u_long)5)
-
-struct pmap {
- long unsigned pm_prog;
- long unsigned pm_vers;
- long unsigned pm_prot;
- long unsigned pm_port;
-};
-
-extern bool_t xdr_pmap (XDR *__xdrs, struct pmap *__regs) __THROW;
-
-struct pmaplist {
- struct pmap pml_map;
- struct pmaplist *pml_next;
-};
-
-extern bool_t xdr_pmaplist (XDR *__xdrs, struct pmaplist **__rp) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/pmap_prot.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/pmap_rmt.h b/mdk-stage1/dietlibc/include/rpc/pmap_rmt.h
deleted file mode 100644
index 160f998ca..000000000
--- a/mdk-stage1/dietlibc/include/rpc/pmap_rmt.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* @(#)pmap_rmt.h 2.1 88/07/29 4.0 RPCSRC; from 1.2 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * Structures and XDR routines for parameters to and replies from
- * the portmapper remote-call-service.
- *
- * Copyright (C) 1986, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_PMAP_RMT_H
-#define _RPC_PMAP_RMT_H 1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-
-__BEGIN_DECLS
-
-struct rmtcallargs {
- u_long prog, vers, proc, arglen;
- caddr_t args_ptr;
- xdrproc_t xdr_args;
-};
-
-extern bool_t xdr_rmtcall_args (XDR *__xdrs, struct rmtcallargs *__crp)
- __THROW;
-
-struct rmtcallres {
- u_long *port_ptr;
- u_long resultslen;
- caddr_t results_ptr;
- xdrproc_t xdr_results;
-};
-
-extern bool_t xdr_rmtcallres (XDR *__xdrs, struct rmtcallres *__crp) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/pmap_rmt.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/rpc.h b/mdk-stage1/dietlibc/include/rpc/rpc.h
deleted file mode 100644
index 20b341d74..000000000
--- a/mdk-stage1/dietlibc/include/rpc/rpc.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* @(#)rpc.h 2.3 88/08/10 4.0 RPCSRC; from 1.9 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * rpc.h, Just includes the billions of rpc header files necessary to
- * do remote procedure calling.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_RPC_H
-#define _RPC_RPC_H 1
-
-#include <rpc/types.h> /* some typedefs */
-#include <netinet/in.h>
-
-/* external data representation interfaces */
-#include <rpc/xdr.h> /* generic (de)serializer */
-
-/* Client side only authentication */
-#include <rpc/auth.h> /* generic authenticator (client side) */
-
-/* Client side (mostly) remote procedure call */
-#include <rpc/clnt.h> /* generic rpc stuff */
-
-/* semi-private protocol headers */
-#include <rpc/rpc_msg.h> /* protocol for rpc messages */
-#include <rpc/auth_unix.h> /* protocol for unix style cred */
-#include <rpc/auth_des.h> /* protocol for des style cred */
-
-/* Server side only remote procedure callee */
-#include <rpc/svc.h> /* service manager and multiplexer */
-#include <rpc/svc_auth.h> /* service side authenticator */
-
-/*
- * COMMENT OUT THE NEXT INCLUDE IF RUNNING ON SUN OS OR ON A VERSION
- * OF UNIX BASED ON NFSSRC. These systems will already have the structures
- * defined by <rpc/netdb.h> included in <netdb.h>.
- */
-/* routines for parsing /etc/rpc */
-#include <rpc/netdb.h> /* structures and routines to parse /etc/rpc */
-
-int bindresvport(int sd, struct sockaddr_in* sin) __THROW;
-
-#endif /* rpc/rpc.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/rpc_des.h b/mdk-stage1/dietlibc/include/rpc/rpc_des.h
deleted file mode 100644
index 0f36d1697..000000000
--- a/mdk-stage1/dietlibc/include/rpc/rpc_des.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-/*
- * Generic DES driver interface
- * Keep this file hardware independent!
- * Copyright (c) 1986 by Sun Microsystems, Inc.
- */
-
-#ifndef _DES_H
-#define _DES_H
-
-#include <sys/types.h>
-
-#define DES_MAXLEN 65536 /* maximum # of bytes to encrypt */
-#define DES_QUICKLEN 16 /* maximum # of bytes to encrypt quickly */
-
-enum desdir
- {
- ENCRYPT, DECRYPT
- };
-enum desmode
- {
- CBC, ECB
- };
-
-/*
- * parameters to ioctl call
- */
-struct desparams
- {
- u_char des_key[8]; /* key (with low bit parity) */
- enum desdir des_dir; /* direction */
- enum desmode des_mode; /* mode */
- u_char des_ivec[8]; /* input vector */
- unsigned des_len; /* number of bytes to crypt */
- union
- {
- u_char UDES_data[DES_QUICKLEN];
- u_char *UDES_buf;
- }
- UDES;
-#define des_data UDES.UDES_data /* direct data here if quick */
-#define des_buf UDES.UDES_buf /* otherwise, pointer to data */
- };
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/rpc/rpc_msg.h b/mdk-stage1/dietlibc/include/rpc/rpc_msg.h
deleted file mode 100644
index 636d60ea9..000000000
--- a/mdk-stage1/dietlibc/include/rpc/rpc_msg.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* @(#)rpc_msg.h 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-/* @(#)rpc_msg.h 1.7 86/07/16 SMI */
-
-#ifndef _RPC_MSG_H
-#define _RPC_MSG_H 1
-
-#include <sys/cdefs.h>
-
-#include <rpc/xdr.h>
-#include <rpc/clnt.h>
-
-/*
- * rpc_msg.h
- * rpc message definition
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#define RPC_MSG_VERSION ((u_long) 2)
-#define RPC_SERVICE_PORT ((u_short) 2048)
-
-__BEGIN_DECLS
-
-/*
- * Bottom up definition of an rpc message.
- * NOTE: call and reply use the same overall struct but
- * different parts of unions within it.
- */
-
-enum msg_type {
- CALL=0,
- REPLY=1
-};
-
-enum reply_stat {
- MSG_ACCEPTED=0,
- MSG_DENIED=1
-};
-
-enum accept_stat {
- SUCCESS=0,
- PROG_UNAVAIL=1,
- PROG_MISMATCH=2,
- PROC_UNAVAIL=3,
- GARBAGE_ARGS=4,
- SYSTEM_ERR=5
-};
-
-enum reject_stat {
- RPC_MISMATCH=0,
- AUTH_ERROR=1
-};
-
-/*
- * Reply part of an rpc exchange
- */
-
-/*
- * Reply to an rpc request that was accepted by the server.
- * Note: there could be an error even though the request was
- * accepted.
- */
-struct accepted_reply {
- struct opaque_auth ar_verf;
- enum accept_stat ar_stat;
- union {
- struct {
- u_long low;
- u_long high;
- } AR_versions;
- struct {
- caddr_t where;
- xdrproc_t proc;
- } AR_results;
- /* and many other null cases */
- } ru;
-#define ar_results ru.AR_results
-#define ar_vers ru.AR_versions
-};
-
-/*
- * Reply to an rpc request that was rejected by the server.
- */
-struct rejected_reply {
- enum reject_stat rj_stat;
- union {
- struct {
- u_long low;
- u_long high;
- } RJ_versions;
- enum auth_stat RJ_why; /* why authentication did not work */
- } ru;
-#define rj_vers ru.RJ_versions
-#define rj_why ru.RJ_why
-};
-
-/*
- * Body of a reply to an rpc request.
- */
-struct reply_body {
- enum reply_stat rp_stat;
- union {
- struct accepted_reply RP_ar;
- struct rejected_reply RP_dr;
- } ru;
-#define rp_acpt ru.RP_ar
-#define rp_rjct ru.RP_dr
-};
-
-/*
- * Body of an rpc request call.
- */
-struct call_body {
- u_long cb_rpcvers; /* must be equal to two */
- u_long cb_prog;
- u_long cb_vers;
- u_long cb_proc;
- struct opaque_auth cb_cred;
- struct opaque_auth cb_verf; /* protocol specific - provided by client */
-};
-
-/*
- * The rpc message
- */
-struct rpc_msg {
- u_long rm_xid;
- enum msg_type rm_direction;
- union {
- struct call_body RM_cmb;
- struct reply_body RM_rmb;
- } ru;
-#define rm_call ru.RM_cmb
-#define rm_reply ru.RM_rmb
-};
-#define acpted_rply ru.RM_rmb.ru.RP_ar
-#define rjcted_rply ru.RM_rmb.ru.RP_dr
-
-
-/*
- * XDR routine to handle a rpc message.
- * xdr_callmsg(xdrs, cmsg)
- * XDR *xdrs;
- * struct rpc_msg *cmsg;
- */
-extern bool_t xdr_callmsg (XDR *__xdrs, struct rpc_msg *__cmsg) __THROW;
-
-/*
- * XDR routine to pre-serialize the static part of a rpc message.
- * xdr_callhdr(xdrs, cmsg)
- * XDR *xdrs;
- * struct rpc_msg *cmsg;
- */
-extern bool_t xdr_callhdr (XDR *__xdrs, struct rpc_msg *__cmsg) __THROW;
-
-/*
- * XDR routine to handle a rpc reply.
- * xdr_replymsg(xdrs, rmsg)
- * XDR *xdrs;
- * struct rpc_msg *rmsg;
- */
-extern bool_t xdr_replymsg (XDR *__xdrs, struct rpc_msg *__rmsg) __THROW;
-
-/*
- * Fills in the error part of a reply message.
- * _seterr_reply(msg, error)
- * struct rpc_msg *msg;
- * struct rpc_err *error;
- */
-extern void _seterr_reply (struct rpc_msg *__msg, struct rpc_err *__error)
- __THROW;
-
-__END_DECLS
-
-#endif /* rpc/rpc_msg.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/svc.h b/mdk-stage1/dietlibc/include/rpc/svc.h
deleted file mode 100644
index 27c997dde..000000000
--- a/mdk-stage1/dietlibc/include/rpc/svc.h
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * svc.h, Server-side remote procedure call interface.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_SVC_H
-#define _RPC_SVC_H 1
-
-#include <sys/cdefs.h>
-#include <rpc/rpc_msg.h>
-
-__BEGIN_DECLS
-
-/*
- * This interface must manage two items concerning remote procedure calling:
- *
- * 1) An arbitrary number of transport connections upon which rpc requests
- * are received. The two most notable transports are TCP and UDP; they are
- * created and registered by routines in svc_tcp.c and svc_udp.c, respectively;
- * they in turn call xprt_register and xprt_unregister.
- *
- * 2) An arbitrary number of locally registered services. Services are
- * described by the following four data: program number, version number,
- * "service dispatch" function, a transport handle, and a boolean that
- * indicates whether or not the exported program should be registered with a
- * local binder service; if true the program's number and version and the
- * port number from the transport handle are registered with the binder.
- * These data are registered with the rpc svc system via svc_register.
- *
- * A service's dispatch function is called whenever an rpc request comes in
- * on a transport. The request's program and version numbers must match
- * those of the registered service. The dispatch function is passed two
- * parameters, struct svc_req * and SVCXPRT *, defined below.
- */
-
-enum xprt_stat {
- XPRT_DIED,
- XPRT_MOREREQS,
- XPRT_IDLE
-};
-
-/*
- * Server side transport handle
- */
-typedef struct SVCXPRT SVCXPRT;
-struct SVCXPRT {
- int xp_sock;
- u_short xp_port; /* associated port number */
- const struct xp_ops {
- bool_t (*xp_recv) (SVCXPRT *__xprt, struct rpc_msg *__msg);
- /* receive incoming requests */
- enum xprt_stat (*xp_stat) (SVCXPRT *__xprt);
- /* get transport status */
- bool_t (*xp_getargs) (SVCXPRT *__xprt, xdrproc_t __xdr_args,
- caddr_t args_ptr); /* get arguments */
- bool_t (*xp_reply) (SVCXPRT *__xprt, struct rpc_msg *__msg);
- /* send reply */
- bool_t (*xp_freeargs) (SVCXPRT *__xprt, xdrproc_t __xdr_args,
- caddr_t args_ptr);
- /* free mem allocated for args */
- void (*xp_destroy) (SVCXPRT *__xprt);
- /* destroy this struct */
- } *xp_ops;
- int xp_addrlen; /* length of remote address */
- struct sockaddr_in xp_raddr; /* remote address */
- struct opaque_auth xp_verf; /* raw response verifier */
- caddr_t xp_p1; /* private */
- caddr_t xp_p2; /* private */
- char xp_pad [256]; /* padding, internal use */
-};
-
-/*
- * Approved way of getting address of caller
- */
-#define svc_getcaller(x) (&(x)->xp_raddr)
-
-/*
- * Operations defined on an SVCXPRT handle
- *
- * SVCXPRT *xprt;
- * struct rpc_msg *msg;
- * xdrproc_t xargs;
- * caddr_t argsp;
- */
-#define SVC_RECV(xprt, msg) \
- (*(xprt)->xp_ops->xp_recv)((xprt), (msg))
-#define svc_recv(xprt, msg) \
- (*(xprt)->xp_ops->xp_recv)((xprt), (msg))
-
-#define SVC_STAT(xprt) \
- (*(xprt)->xp_ops->xp_stat)(xprt)
-#define svc_stat(xprt) \
- (*(xprt)->xp_ops->xp_stat)(xprt)
-
-#define SVC_GETARGS(xprt, xargs, argsp) \
- (*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp))
-#define svc_getargs(xprt, xargs, argsp) \
- (*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp))
-
-#define SVC_REPLY(xprt, msg) \
- (*(xprt)->xp_ops->xp_reply) ((xprt), (msg))
-#define svc_reply(xprt, msg) \
- (*(xprt)->xp_ops->xp_reply) ((xprt), (msg))
-
-#define SVC_FREEARGS(xprt, xargs, argsp) \
- (*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp))
-#define svc_freeargs(xprt, xargs, argsp) \
- (*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp))
-
-#define SVC_DESTROY(xprt) \
- (*(xprt)->xp_ops->xp_destroy)(xprt)
-#define svc_destroy(xprt) \
- (*(xprt)->xp_ops->xp_destroy)(xprt)
-
-
-/*
- * Service request
- */
-struct svc_req {
- rpcprog_t rq_prog; /* service program number */
- rpcvers_t rq_vers; /* service protocol version */
- rpcproc_t rq_proc; /* the desired procedure */
- struct opaque_auth rq_cred; /* raw creds from the wire */
- caddr_t rq_clntcred; /* read only cooked cred */
- SVCXPRT *rq_xprt; /* associated transport */
-};
-
-#ifndef __DISPATCH_FN_T
-#define __DISPATCH_FN_T
-typedef void (*__dispatch_fn_t) (struct svc_req*, SVCXPRT*);
-#endif
-
-/*
- * Service registration
- *
- * svc_register(xprt, prog, vers, dispatch, protocol)
- * SVCXPRT *xprt;
- * rpcprog_t prog;
- * rpcvers_t vers;
- * void (*dispatch)(struct svc_req*, SVCXPRT*);
- * rpcprot_t protocol; like TCP or UDP, zero means do not register
- */
-extern bool_t svc_register (SVCXPRT *__xprt, rpcprog_t __prog,
- rpcvers_t __vers, __dispatch_fn_t __dispatch,
- rpcprot_t __protocol) __THROW;
-
-/*
- * Service un-registration
- *
- * svc_unregister(prog, vers)
- * rpcprog_t prog;
- * rpcvers_t vers;
- */
-extern void svc_unregister (rpcprog_t __prog, rpcvers_t __vers) __THROW;
-
-/*
- * Transport registration.
- *
- * xprt_register(xprt)
- * SVCXPRT *xprt;
- */
-extern void xprt_register (SVCXPRT *__xprt) __THROW;
-
-/*
- * Transport un-register
- *
- * xprt_unregister(xprt)
- * SVCXPRT *xprt;
- */
-extern void xprt_unregister (SVCXPRT *__xprt) __THROW;
-
-
-/*
- * When the service routine is called, it must first check to see if it
- * knows about the procedure; if not, it should call svcerr_noproc
- * and return. If so, it should deserialize its arguments via
- * SVC_GETARGS (defined above). If the deserialization does not work,
- * svcerr_decode should be called followed by a return. Successful
- * decoding of the arguments should be followed the execution of the
- * procedure's code and a call to svc_sendreply.
- *
- * Also, if the service refuses to execute the procedure due to too-
- * weak authentication parameters, svcerr_weakauth should be called.
- * Note: do not confuse access-control failure with weak authentication!
- *
- * NB: In pure implementations of rpc, the caller always waits for a reply
- * msg. This message is sent when svc_sendreply is called.
- * Therefore pure service implementations should always call
- * svc_sendreply even if the function logically returns void; use
- * xdr.h - xdr_void for the xdr routine. HOWEVER, tcp based rpc allows
- * for the abuse of pure rpc via batched calling or pipelining. In the
- * case of a batched call, svc_sendreply should NOT be called since
- * this would send a return message, which is what batching tries to avoid.
- * It is the service/protocol writer's responsibility to know which calls are
- * batched and which are not. Warning: responding to batch calls may
- * deadlock the caller and server processes!
- */
-
-extern bool_t svc_sendreply (SVCXPRT *xprt, xdrproc_t __xdr_results,
- caddr_t __xdr_location) __THROW;
-
-extern void svcerr_decode (SVCXPRT *__xprt) __THROW;
-
-extern void svcerr_weakauth (SVCXPRT *__xprt) __THROW;
-
-extern void svcerr_noproc (SVCXPRT *__xprt) __THROW;
-
-extern void svcerr_progvers (SVCXPRT *__xprt, rpcvers_t __low_vers,
- rpcvers_t __high_vers) __THROW;
-
-extern void svcerr_auth (SVCXPRT *__xprt, enum auth_stat __why) __THROW;
-
-extern void svcerr_noprog (SVCXPRT *__xprt) __THROW;
-
-extern void svcerr_systemerr (SVCXPRT *__xprt) __THROW;
-
-/*
- * Lowest level dispatching -OR- who owns this process anyway.
- * Somebody has to wait for incoming requests and then call the correct
- * service routine. The routine svc_run does infinite waiting; i.e.,
- * svc_run never returns.
- * Since another (coexistent) package may wish to selectively wait for
- * incoming calls or other events outside of the rpc architecture, the
- * routine svc_getreq is provided. It must be passed readfds, the
- * "in-place" results of a select system call (see select, section 2).
- */
-
-/*
- * Global keeper of rpc service descriptors in use
- * dynamic; must be inspected before each call to select
- */
-
-extern struct pollfd *svc_pollfd;
-extern int svc_max_pollfd;
-extern fd_set svc_fdset;
-#define svc_fds svc_fdset.fds_bits[0] /* compatibility */
-
-/*
- * a small program implemented by the svc_rpc implementation itself;
- * also see clnt.h for protocol numbers.
- */
-extern void svc_getreq (int __rdfds) __THROW;
-extern void svc_getreq_common (const int __fd) __THROW;
-extern void svc_getreqset (fd_set *__readfds) __THROW;
-extern void svc_getreq_poll (struct pollfd *, const int) __THROW;
-extern void svc_exit (void) __THROW;
-extern void svc_run (void) __THROW;
-
-/*
- * Socket to use on svcxxx_create call to get default socket
- */
-#define RPC_ANYSOCK -1
-
-/*
- * These are the existing service side transport implementations
- */
-
-/*
- * Memory based rpc for testing and timing.
- */
-extern SVCXPRT *svcraw_create (void) __THROW;
-
-/*
- * Udp based rpc.
- */
-extern SVCXPRT *svcudp_create (int __sock) __THROW;
-extern SVCXPRT *svcudp_bufcreate (int __sock, u_int __sendsz, u_int __recvsz)
- __THROW;
-
-/*
- * Tcp based rpc.
- */
-extern SVCXPRT *svctcp_create (int __sock, u_int __sendsize, u_int __recvsize)
- __THROW;
-
-
-/*
- * Unix based rpc.
- */
-extern SVCXPRT *svcunix_create (int __sock, u_int __sendsize, u_int __recvsize,
- char *__path) __THROW;
-
-
-__END_DECLS
-
-#endif /* rpc/svc.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/svc_auth.h b/mdk-stage1/dietlibc/include/rpc/svc_auth.h
deleted file mode 100644
index cd4b8da29..000000000
--- a/mdk-stage1/dietlibc/include/rpc/svc_auth.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* @(#)svc_auth.h 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-/* @(#)svc_auth.h 1.6 86/07/16 SMI */
-
-/*
- * svc_auth.h, Service side of rpc authentication.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_SVC_AUTH_H
-#define _RPC_SVC_AUTH_H 1
-
-#include <sys/cdefs.h>
-#include <rpc/svc.h>
-
-__BEGIN_DECLS
-
-/*
- * Server side authenticator
- */
-extern enum auth_stat _authenticate (struct svc_req *__rqst,
- struct rpc_msg *__msg) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/svc_auth.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/types.h b/mdk-stage1/dietlibc/include/rpc/types.h
deleted file mode 100644
index e2e8402be..000000000
--- a/mdk-stage1/dietlibc/include/rpc/types.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-/* fixincludes should not add extern "C" to this file */
-/*
- * Rpc additions to <sys/types.h>
- */
-#ifndef _RPC_TYPES_H
-#define _RPC_TYPES_H 1
-
-typedef int bool_t;
-typedef int enum_t;
-/* This needs to be changed to uint32_t in the future */
-typedef unsigned long rpcprog_t;
-typedef unsigned long rpcvers_t;
-typedef unsigned long rpcproc_t;
-typedef unsigned long rpcprot_t;
-typedef unsigned long rpcport_t;
-
-#define __dontcare__ -1
-
-#ifndef FALSE
-# define FALSE (0)
-#endif
-
-#ifndef TRUE
-# define TRUE (1)
-#endif
-
-#ifndef NULL
-# define NULL 0
-#endif
-
-#include <stdlib.h> /* For malloc decl. */
-#define mem_alloc(bsize) malloc(bsize)
-#define mem_free(ptr, bsize) free(ptr)
-
-#ifndef makedev /* ie, we haven't already included it */
-#include <sys/types.h>
-#endif
-#include <sys/time.h>
-#include <sys/param.h>
-
-#include <netinet/in.h>
-
-#ifndef INADDR_LOOPBACK
-#define INADDR_LOOPBACK (u_long)0x7F000001
-#endif
-#ifndef MAXHOSTNAMELEN
-#define MAXHOSTNAMELEN 64
-#endif
-
-#endif /* rpc/types.h */
diff --git a/mdk-stage1/dietlibc/include/rpc/xdr.h b/mdk-stage1/dietlibc/include/rpc/xdr.h
deleted file mode 100644
index ce092f085..000000000
--- a/mdk-stage1/dietlibc/include/rpc/xdr.h
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * xdr.h, External Data Representation Serialization Routines.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#ifndef _RPC_XDR_H
-#define _RPC_XDR_H 1
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <rpc/types.h>
-
-/* We need FILE. */
-#include <stdio.h>
-
-__BEGIN_DECLS
-
-/*
- * XDR provides a conventional way for converting between C data
- * types and an external bit-string representation. Library supplied
- * routines provide for the conversion on built-in C data types. These
- * routines and utility routines defined here are used to help implement
- * a type encode/decode routine for each user-defined type.
- *
- * Each data type provides a single procedure which takes two arguments:
- *
- * bool_t
- * xdrproc(xdrs, argresp)
- * XDR *xdrs;
- * <type> *argresp;
- *
- * xdrs is an instance of a XDR handle, to which or from which the data
- * type is to be converted. argresp is a pointer to the structure to be
- * converted. The XDR handle contains an operation field which indicates
- * which of the operations (ENCODE, DECODE * or FREE) is to be performed.
- *
- * XDR_DECODE may allocate space if the pointer argresp is null. This
- * data can be freed with the XDR_FREE operation.
- *
- * We write only one procedure per data type to make it easy
- * to keep the encode and decode procedures for a data type consistent.
- * In many cases the same code performs all operations on a user defined type,
- * because all the hard work is done in the component type routines.
- * decode as a series of calls on the nested data types.
- */
-
-/*
- * Xdr operations. XDR_ENCODE causes the type to be encoded into the
- * stream. XDR_DECODE causes the type to be extracted from the stream.
- * XDR_FREE can be used to release the space allocated by an XDR_DECODE
- * request.
- */
-enum xdr_op {
- XDR_ENCODE = 0,
- XDR_DECODE = 1,
- XDR_FREE = 2
-};
-
-/*
- * This is the number of bytes per unit of external data.
- */
-#define BYTES_PER_XDR_UNIT (4)
-/*
- * This only works if the above is a power of 2. But it's defined to be
- * 4 by the appropriate RFCs. So it will work. And it's normally quicker
- * than the old routine.
- */
-#if 1
-#define RNDUP(x) (((x) + BYTES_PER_XDR_UNIT - 1) & ~(BYTES_PER_XDR_UNIT - 1))
-#else /* this is the old routine */
-#define RNDUP(x) ((((x) + BYTES_PER_XDR_UNIT - 1) / BYTES_PER_XDR_UNIT) \
- * BYTES_PER_XDR_UNIT)
-#endif
-
-/*
- * The XDR handle.
- * Contains operation which is being applied to the stream,
- * an operations vector for the particular implementation (e.g. see xdr_mem.c),
- * and two private fields for the use of the particular implementation.
- */
-typedef struct XDR XDR;
-struct XDR
- {
- enum xdr_op x_op; /* operation; fast additional param */
- struct xdr_ops
- {
- bool_t (*x_getlong) (XDR *__xdrs, long *__lp);
- /* get a long from underlying stream */
- bool_t (*x_putlong) (XDR *__xdrs, const long *__lp);
- /* put a long to " */
- bool_t (*x_getbytes) (XDR *__xdrs, caddr_t __addr, u_int __len);
- /* get some bytes from " */
- bool_t (*x_putbytes) (XDR *__xdrs, const char *__addr, u_int __len);
- /* put some bytes to " */
- u_int (*x_getpostn) (const XDR *__xdrs);
- /* returns bytes off from beginning */
- bool_t (*x_setpostn) (XDR *__xdrs, u_int __pos);
- /* lets you reposition the stream */
- int32_t *(*x_inline) (XDR *__xdrs, int __len);
- /* buf quick ptr to buffered data */
- void (*x_destroy) (XDR *__xdrs);
- /* free privates of this xdr_stream */
- bool_t (*x_getint32) (XDR *__xdrs, int32_t *__ip);
- /* get a int from underlying stream */
- bool_t (*x_putint32) (XDR *__xdrs, const int32_t *__ip);
- /* put a int to " */
- }
- *x_ops;
- caddr_t x_public; /* users' data */
- caddr_t x_private; /* pointer to private data */
- caddr_t x_base; /* private used for position info */
- int x_handy; /* extra private word */
- };
-
-/*
- * A xdrproc_t exists for each data type which is to be encoded or decoded.
- *
- * The second argument to the xdrproc_t is a pointer to an opaque pointer.
- * The opaque pointer generally points to a structure of the data type
- * to be decoded. If this pointer is 0, then the type routines should
- * allocate dynamic storage of the appropriate size and return it.
- * bool_t (*xdrproc_t)(XDR *, caddr_t *);
- */
-typedef bool_t (*xdrproc_t) (XDR *, void *,...);
-
-
-/*
- * Operations defined on a XDR handle
- *
- * XDR *xdrs;
- * int32_t *int32p;
- * long *longp;
- * caddr_t addr;
- * u_int len;
- * u_int pos;
- */
-#define XDR_GETINT32(xdrs, int32p) \
- (*(xdrs)->x_ops->x_getint32)(xdrs, int32p)
-#define xdr_getint32(xdrs, int32p) \
- (*(xdrs)->x_ops->x_getint32)(xdrs, int32p)
-
-#define XDR_PUTINT32(xdrs, int32p) \
- (*(xdrs)->x_ops->x_putint32)(xdrs, int32p)
-#define xdr_putint32(xdrs, int32p) \
- (*(xdrs)->x_ops->x_putint32)(xdrs, int32p)
-
-#define XDR_GETLONG(xdrs, longp) \
- (*(xdrs)->x_ops->x_getlong)(xdrs, longp)
-#define xdr_getlong(xdrs, longp) \
- (*(xdrs)->x_ops->x_getlong)(xdrs, longp)
-
-#define XDR_PUTLONG(xdrs, longp) \
- (*(xdrs)->x_ops->x_putlong)(xdrs, longp)
-#define xdr_putlong(xdrs, longp) \
- (*(xdrs)->x_ops->x_putlong)(xdrs, longp)
-
-#define XDR_GETBYTES(xdrs, addr, len) \
- (*(xdrs)->x_ops->x_getbytes)(xdrs, addr, len)
-#define xdr_getbytes(xdrs, addr, len) \
- (*(xdrs)->x_ops->x_getbytes)(xdrs, addr, len)
-
-#define XDR_PUTBYTES(xdrs, addr, len) \
- (*(xdrs)->x_ops->x_putbytes)(xdrs, addr, len)
-#define xdr_putbytes(xdrs, addr, len) \
- (*(xdrs)->x_ops->x_putbytes)(xdrs, addr, len)
-
-#define XDR_GETPOS(xdrs) \
- (*(xdrs)->x_ops->x_getpostn)(xdrs)
-#define xdr_getpos(xdrs) \
- (*(xdrs)->x_ops->x_getpostn)(xdrs)
-
-#define XDR_SETPOS(xdrs, pos) \
- (*(xdrs)->x_ops->x_setpostn)(xdrs, pos)
-#define xdr_setpos(xdrs, pos) \
- (*(xdrs)->x_ops->x_setpostn)(xdrs, pos)
-
-#define XDR_INLINE(xdrs, len) \
- (*(xdrs)->x_ops->x_inline)(xdrs, len)
-#define xdr_inline(xdrs, len) \
- (*(xdrs)->x_ops->x_inline)(xdrs, len)
-
-#define XDR_DESTROY(xdrs) \
- do { \
- if ((xdrs)->x_ops->x_destroy) \
- (*(xdrs)->x_ops->x_destroy)(xdrs); \
- } while (0)
-#define xdr_destroy(xdrs) \
- do { \
- if ((xdrs)->x_ops->x_destroy) \
- (*(xdrs)->x_ops->x_destroy)(xdrs); \
- } while (0)
-
-/*
- * Support struct for discriminated unions.
- * You create an array of xdrdiscrim structures, terminated with
- * a entry with a null procedure pointer. The xdr_union routine gets
- * the discriminant value and then searches the array of structures
- * for a matching value. If a match is found the associated xdr routine
- * is called to handle that part of the union. If there is
- * no match, then a default routine may be called.
- * If there is no match and no default routine it is an error.
- */
-#define NULL_xdrproc_t ((xdrproc_t)0)
-struct xdr_discrim
-{
- int value;
- xdrproc_t proc;
-};
-
-/*
- * Inline routines for fast encode/decode of primitive data types.
- * Caveat emptor: these use single memory cycles to get the
- * data from the underlying buffer, and will fail to operate
- * properly if the data is not aligned. The standard way to use these
- * is to say:
- * if ((buf = XDR_INLINE(xdrs, count)) == NULL)
- * return (FALSE);
- * <<< macro calls >>>
- * where ``count'' is the number of bytes of data occupied
- * by the primitive data types.
- *
- * N.B. and frozen for all time: each data type here uses 4 bytes
- * of external representation.
- */
-
-#define IXDR_GET_INT32(buf) ((int32_t)ntohl((uint32_t)*(buf)++))
-#define IXDR_PUT_INT32(buf, v) (*(buf)++ = (int32_t)htonl((uint32_t)(v)))
-#define IXDR_GET_U_INT32(buf) ((uint32_t)IXDR_GET_INT32(buf))
-#define IXDR_PUT_U_INT32(buf, v) IXDR_PUT_INT32(buf, (int32_t)(v))
-
-/* WARNING: The IXDR_*_LONG defines are removed by Sun for new platforms
- * and shouldn't be used any longer. Code which use this defines or longs
- * in the RPC code will not work on 64bit Solaris platforms !
- */
-#define IXDR_GET_LONG(buf) \
- ((long)ntohl((u_long)*__extension__((u_int32_t*)(buf))++))
-#define IXDR_PUT_LONG(buf, v) \
- (*__extension__((u_int32_t*)(buf))++ = (long)htonl((u_long)(v)))
-#define IXDR_GET_U_LONG(buf) ((u_long)IXDR_GET_LONG(buf))
-#define IXDR_PUT_U_LONG(buf, v) IXDR_PUT_LONG(buf, (long)(v))
-
-
-#define IXDR_GET_BOOL(buf) ((bool_t)IXDR_GET_LONG(buf))
-#define IXDR_GET_ENUM(buf, t) ((t)IXDR_GET_LONG(buf))
-#define IXDR_GET_SHORT(buf) ((short)IXDR_GET_LONG(buf))
-#define IXDR_GET_U_SHORT(buf) ((u_short)IXDR_GET_LONG(buf))
-
-#define IXDR_PUT_BOOL(buf, v) IXDR_PUT_LONG(buf, (long)(v))
-#define IXDR_PUT_ENUM(buf, v) IXDR_PUT_LONG(buf, (long)(v))
-#define IXDR_PUT_SHORT(buf, v) IXDR_PUT_LONG(buf, (long)(v))
-#define IXDR_PUT_U_SHORT(buf, v) IXDR_PUT_LONG(buf, (long)(v))
-
-/*
- * These are the "generic" xdr routines.
- * None of these can have const applied because it's not possible to
- * know whether the call is a read or a write to the passed parameter
- * also, the XDR structure is always updated by some of these calls.
- */
-extern bool_t xdr_void (void) __THROW;
-extern bool_t xdr_short (XDR *__xdrs, short *__sp) __THROW;
-extern bool_t xdr_u_short (XDR *__xdrs, u_short *__usp) __THROW;
-extern bool_t xdr_int (XDR *__xdrs, int *__ip) __THROW;
-extern bool_t xdr_u_int (XDR *__xdrs, u_int *__up) __THROW;
-extern bool_t xdr_long (XDR *__xdrs, long *__lp) __THROW;
-extern bool_t xdr_u_long (XDR *__xdrs, u_long *__ulp) __THROW;
-extern bool_t xdr_hyper (XDR *__xdrs, __quad_t *__llp) __THROW;
-extern bool_t xdr_u_hyper (XDR *__xdrs, __u_quad_t *__ullp) __THROW;
-extern bool_t xdr_longlong_t (XDR *__xdrs, __quad_t *__llp) __THROW;
-extern bool_t xdr_u_longlong_t (XDR *__xdrs, __u_quad_t *__ullp) __THROW;
-extern bool_t xdr_int8_t (XDR *__xdrs, int8_t *__ip) __THROW;
-extern bool_t xdr_uint8_t (XDR *__xdrs, uint8_t *__up) __THROW;
-extern bool_t xdr_int16_t (XDR *__xdrs, int16_t *__ip) __THROW;
-extern bool_t xdr_uint16_t (XDR *__xdrs, uint16_t *__up) __THROW;
-extern bool_t xdr_int32_t (XDR *__xdrs, int32_t *__ip) __THROW;
-extern bool_t xdr_uint32_t (XDR *__xdrs, uint32_t *__up) __THROW;
-extern bool_t xdr_int64_t (XDR *__xdrs, int64_t *__ip) __THROW;
-extern bool_t xdr_uint64_t (XDR *__xdrs, uint64_t *__up) __THROW;
-extern bool_t xdr_bool (XDR *__xdrs, bool_t *__bp) __THROW;
-extern bool_t xdr_enum (XDR *__xdrs, enum_t *__ep) __THROW;
-extern bool_t xdr_array (XDR * _xdrs, caddr_t *__addrp, u_int *__sizep,
- u_int __maxsize, u_int __elsize, xdrproc_t __elproc)
- __THROW;
-extern bool_t xdr_bytes (XDR *__xdrs, char **__cpp, u_int *__sizep,
- u_int __maxsize) __THROW;
-extern bool_t xdr_opaque (XDR *__xdrs, caddr_t __cp, u_int __cnt) __THROW;
-extern bool_t xdr_string (XDR *__xdrs, char **__cpp, u_int __maxsize) __THROW;
-extern bool_t xdr_union (XDR *__xdrs, enum_t *__dscmp, char *__unp,
- const struct xdr_discrim *__choices,
- xdrproc_t dfault) __THROW;
-extern bool_t xdr_char (XDR *__xdrs, char *__cp) __THROW;
-extern bool_t xdr_u_char (XDR *__xdrs, u_char *__cp) __THROW;
-extern bool_t xdr_vector (XDR *__xdrs, char *__basep, u_int __nelem,
- u_int __elemsize, xdrproc_t __xdr_elem) __THROW;
-extern bool_t xdr_float (XDR *__xdrs, float *__fp) __THROW;
-extern bool_t xdr_double (XDR *__xdrs, double *__dp) __THROW;
-extern bool_t xdr_reference (XDR *__xdrs, caddr_t *__xpp, u_int __size,
- xdrproc_t __proc) __THROW;
-extern bool_t xdr_pointer (XDR *__xdrs, char **__objpp,
- u_int __obj_size, xdrproc_t __xdr_obj) __THROW;
-extern bool_t xdr_wrapstring (XDR *__xdrs, char **__cpp) __THROW;
-extern u_long xdr_sizeof (xdrproc_t, void *) __THROW;
-
-/*
- * Common opaque bytes objects used by many rpc protocols;
- * declared here due to commonality.
- */
-#define MAX_NETOBJ_SZ 1024
-struct netobj
-{
- u_int n_len;
- char *n_bytes;
-};
-typedef struct netobj netobj;
-extern bool_t xdr_netobj (XDR *__xdrs, struct netobj *__np) __THROW;
-
-/*
- * These are the public routines for the various implementations of
- * xdr streams.
- */
-
-/* XDR using memory buffers */
-extern void xdrmem_create (XDR *__xdrs, const caddr_t __addr,
- u_int __size, enum xdr_op __xop) __THROW;
-
-/* XDR using stdio library */
-extern void xdrstdio_create (XDR *__xdrs, FILE *__file, enum xdr_op __xop)
- __THROW;
-
-/* XDR pseudo records for tcp */
-extern void xdrrec_create (XDR *__xdrs, u_int __sendsize,
- u_int __recvsize, caddr_t __tcp_handle,
- int (*__readit) (char *, char *, int),
- int (*__writeit) (char *, char *, int)) __THROW;
-
-/* make end of xdr record */
-extern bool_t xdrrec_endofrecord (XDR *__xdrs, bool_t __sendnow) __THROW;
-
-/* move to beginning of next record */
-extern bool_t xdrrec_skiprecord (XDR *__xdrs) __THROW;
-
-/* true if no more input */
-extern bool_t xdrrec_eof (XDR *__xdrs) __THROW;
-
-/* free memory buffers for xdr */
-extern void xdr_free (xdrproc_t __proc, char *__objp) __THROW;
-
-__END_DECLS
-
-#endif /* rpc/xdr.h */
diff --git a/mdk-stage1/dietlibc/include/sched.h b/mdk-stage1/dietlibc/include/sched.h
deleted file mode 100644
index 5e4430d29..000000000
--- a/mdk-stage1/dietlibc/include/sched.h
+++ /dev/null
@@ -1,74 +0,0 @@
-#ifndef _SCHED_H
-#define _SCHED_H 1
-
-#include <time.h>
-
-#include <sys/types.h>
-#ifndef u16
-#define u16 __u16
-#endif
-
-/* till those F**KIN' kernel headers are sane: A COPY !
- * #include <linux/sched.h>
- * A COPY OF THE STUFF WE NEED.... *GRUMBLE* */
-
-/*
- * cloning flags:
- */
-#define CSIGNAL 0x000000ff /* signal mask to be sent at exit */
-#define CLONE_VM 0x00000100 /* set if VM shared between processes */
-#define CLONE_FS 0x00000200 /* set if fs info shared between processes */
-#define CLONE_FILES 0x00000400 /* set if open files shared between processes */
-#define CLONE_SIGHAND 0x00000800 /* set if signal handlers and blocked signals shared */
-#define CLONE_PID 0x00001000 /* set if pid shared */
-#define CLONE_PTRACE 0x00002000 /* set if we want to let tracing continue on the child too */
-#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */
-#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */
-#define CLONE_THREAD 0x00010000 /* Same thread group? */
-
-#define CLONE_SIGNAL (CLONE_SIGHAND | CLONE_THREA)
-
-/*
- * Scheduling policies
- */
-#define SCHED_OTHER 0
-#define SCHED_FIFO 1
-#define SCHED_RR 2
-
-/*
- * This is an additional bit set when we want to
- * yield the CPU for one re-schedule..
- */
-#define SCHED_YIELD 0x10
-
-struct sched_param {
- int sched_priority;
-};
-
-/* END OF COPY form kernel-header */
-
-int __sched_setparam(pid_t pid, const struct sched_param *p);
-int sched_setparam(pid_t pid, const struct sched_param *p);
-
-int __sched_getparam(pid_t pid, struct sched_param *p);
-int sched_getparam(pid_t pid, struct sched_param *p);
-
-int __sched_getscheduler(pid_t pid);
-int sched_getscheduler(pid_t pid);
-
-int __sched_setscheduler(pid_t pid, int policy, const struct sched_param *p);
-int sched_setscheduler(pid_t pid, int policy, const struct sched_param *p);
-
-int __sched_yield(void);
-int sched_yield(void);
-
-int __sched_get_priority_max(int policy);
-int sched_get_priority_max(int policy);
-
-int __sched_get_priority_min(int policy);
-int sched_get_priority_min(int policy);
-
-int __sched_rr_get_interval(pid_t pid, struct timespec *tp);
-int sched_rr_get_interval(pid_t pid, struct timespec *tp);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/scsi/scsi.h b/mdk-stage1/dietlibc/include/scsi/scsi.h
deleted file mode 100644
index 652e44ee9..000000000
--- a/mdk-stage1/dietlibc/include/scsi/scsi.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/* Copyright (C) 1998, 1999 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/*
- * This header file contains public constants and structures used by
- * the scsi code for linux.
- */
-
-#ifndef _SCSI_SCSI_H
-#define _SCSI_SCSI_H 1
-
-/*
- * SCSI opcodes
- */
-
-#define TEST_UNIT_READY 0x00
-#define REZERO_UNIT 0x01
-#define REQUEST_SENSE 0x03
-#define FORMAT_UNIT 0x04
-#define READ_BLOCK_LIMITS 0x05
-#define REASSIGN_BLOCKS 0x07
-#define READ_6 0x08
-#define WRITE_6 0x0a
-#define SEEK_6 0x0b
-#define READ_REVERSE 0x0f
-#define WRITE_FILEMARKS 0x10
-#define SPACE 0x11
-#define INQUIRY 0x12
-#define RECOVER_BUFFERED_DATA 0x14
-#define MODE_SELECT 0x15
-#define RESERVE 0x16
-#define RELEASE 0x17
-#define COPY 0x18
-#define ERASE 0x19
-#define MODE_SENSE 0x1a
-#define START_STOP 0x1b
-#define RECEIVE_DIAGNOSTIC 0x1c
-#define SEND_DIAGNOSTIC 0x1d
-#define ALLOW_MEDIUM_REMOVAL 0x1e
-
-#define SET_WINDOW 0x24
-#define READ_CAPACITY 0x25
-#define READ_10 0x28
-#define WRITE_10 0x2a
-#define SEEK_10 0x2b
-#define WRITE_VERIFY 0x2e
-#define VERIFY 0x2f
-#define SEARCH_HIGH 0x30
-#define SEARCH_EQUAL 0x31
-#define SEARCH_LOW 0x32
-#define SET_LIMITS 0x33
-#define PRE_FETCH 0x34
-#define READ_POSITION 0x34
-#define SYNCHRONIZE_CACHE 0x35
-#define LOCK_UNLOCK_CACHE 0x36
-#define READ_DEFECT_DATA 0x37
-#define MEDIUM_SCAN 0x38
-#define COMPARE 0x39
-#define COPY_VERIFY 0x3a
-#define WRITE_BUFFER 0x3b
-#define READ_BUFFER 0x3c
-#define UPDATE_BLOCK 0x3d
-#define READ_LONG 0x3e
-#define WRITE_LONG 0x3f
-#define CHANGE_DEFINITION 0x40
-#define WRITE_SAME 0x41
-#define READ_TOC 0x43
-#define LOG_SELECT 0x4c
-#define LOG_SENSE 0x4d
-#define MODE_SELECT_10 0x55
-#define RESERVE_10 0x56
-#define RELEASE_10 0x57
-#define MODE_SENSE_10 0x5a
-#define PERSISTENT_RESERVE_IN 0x5e
-#define PERSISTENT_RESERVE_OUT 0x5f
-#define MOVE_MEDIUM 0xa5
-#define READ_12 0xa8
-#define WRITE_12 0xaa
-#define WRITE_VERIFY_12 0xae
-#define SEARCH_HIGH_12 0xb0
-#define SEARCH_EQUAL_12 0xb1
-#define SEARCH_LOW_12 0xb2
-#define READ_ELEMENT_STATUS 0xb8
-#define SEND_VOLUME_TAG 0xb6
-#define WRITE_LONG_2 0xea
-
-/*
- * Status codes
- */
-
-#define GOOD 0x00
-#define CHECK_CONDITION 0x01
-#define CONDITION_GOOD 0x02
-#define BUSY 0x04
-#define INTERMEDIATE_GOOD 0x08
-#define INTERMEDIATE_C_GOOD 0x0a
-#define RESERVATION_CONFLICT 0x0c
-#define COMMAND_TERMINATED 0x11
-#define QUEUE_FULL 0x14
-
-#define STATUS_MASK 0x3e
-
-/*
- * SENSE KEYS
- */
-
-#define NO_SENSE 0x00
-#define RECOVERED_ERROR 0x01
-#define NOT_READY 0x02
-#define MEDIUM_ERROR 0x03
-#define HARDWARE_ERROR 0x04
-#define ILLEGAL_REQUEST 0x05
-#define UNIT_ATTENTION 0x06
-#define DATA_PROTECT 0x07
-#define BLANK_CHECK 0x08
-#define COPY_ABORTED 0x0a
-#define ABORTED_COMMAND 0x0b
-#define VOLUME_OVERFLOW 0x0d
-#define MISCOMPARE 0x0e
-
-
-/*
- * DEVICE TYPES
- */
-
-#define TYPE_DISK 0x00
-#define TYPE_TAPE 0x01
-#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
-#define TYPE_WORM 0x04 /* Treated as ROM by our system */
-#define TYPE_ROM 0x05
-#define TYPE_SCANNER 0x06
-#define TYPE_MOD 0x07 /* Magneto-optical disk -
- * - treated as TYPE_DISK */
-#define TYPE_MEDIUM_CHANGER 0x08
-#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
-#define TYPE_NO_LUN 0x7f
-
-/*
- * standard mode-select header prepended to all mode-select commands
- *
- * moved here from cdrom.h -- kraxel
- */
-
-struct ccs_modesel_head
- {
- unsigned char _r1; /* reserved. */
- unsigned char medium; /* device-specific medium type. */
- unsigned char _r2; /* reserved. */
- unsigned char block_desc_length; /* block descriptor length. */
- unsigned char density; /* device-specific density code. */
- unsigned char number_blocks_hi; /* number of blocks in this block
- desc. */
- unsigned char number_blocks_med;
- unsigned char number_blocks_lo;
- unsigned char _r3;
- unsigned char block_length_hi; /* block length for blocks in this
- desc. */
- unsigned char block_length_med;
- unsigned char block_length_lo;
- };
-
-/*
- * MESSAGE CODES
- */
-
-#define COMMAND_COMPLETE 0x00
-#define EXTENDED_MESSAGE 0x01
-#define EXTENDED_MODIFY_DATA_POINTER 0x00
-#define EXTENDED_SDTR 0x01
-#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */
-#define EXTENDED_WDTR 0x03
-#define SAVE_POINTERS 0x02
-#define RESTORE_POINTERS 0x03
-#define DISCONNECT 0x04
-#define INITIATOR_ERROR 0x05
-#define ABORT 0x06
-#define MESSAGE_REJECT 0x07
-#define NOP 0x08
-#define MSG_PARITY_ERROR 0x09
-#define LINKED_CMD_COMPLETE 0x0a
-#define LINKED_FLG_CMD_COMPLETE 0x0b
-#define BUS_DEVICE_RESET 0x0c
-
-#define INITIATE_RECOVERY 0x0f /* SCSI-II only */
-#define RELEASE_RECOVERY 0x10 /* SCSI-II only */
-
-#define SIMPLE_QUEUE_TAG 0x20
-#define HEAD_OF_QUEUE_TAG 0x21
-#define ORDERED_QUEUE_TAG 0x22
-
-/*
- * Here are some scsi specific ioctl commands which are sometimes useful.
- */
-/* These are a few other constants only used by scsi devices. */
-
-#define SCSI_IOCTL_GET_IDLUN 0x5382
-
-/* Used to turn on and off tagged queuing for scsi devices. */
-
-#define SCSI_IOCTL_TAGGED_ENABLE 0x5383
-#define SCSI_IOCTL_TAGGED_DISABLE 0x5384
-
-/* Used to obtain the host number of a device. */
-#define SCSI_IOCTL_PROBE_HOST 0x5385
-
-/* Used to get the bus number for a device. */
-#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386
-
-#endif /* scsi/scsi.h */
diff --git a/mdk-stage1/dietlibc/include/scsi/scsi_ioctl.h b/mdk-stage1/dietlibc/include/scsi/scsi_ioctl.h
deleted file mode 100644
index bc9931838..000000000
--- a/mdk-stage1/dietlibc/include/scsi/scsi_ioctl.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* Copyright (C) 1999 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-#ifndef _SCSI_IOCTL_H
-#define _SCSI_IOCTL_H
-
-/* IOCTLs for SCSI. */
-#define SCSI_IOCTL_SEND_COMMAND 1 /* Send a command to the SCSI host. */
-#define SCSI_IOCTL_TEST_UNIT_READY 2 /* Test if unit is ready. */
-#define SCSI_IOCTL_BENCHMARK_COMMAND 3
-#define SCSI_IOCTL_SYNC 4 /* Request synchronous parameters. */
-#define SCSI_IOCTL_START_UNIT 5
-#define SCSI_IOCTL_STOP_UNIT 6
-#define SCSI_IOCTL_DOORLOCK 0x5380 /* Lock the eject mechanism. */
-#define SCSI_IOCTL_DOORUNLOCK 0x5381 /* Unlock the mechanism. */
-
-#endif
-
-
diff --git a/mdk-stage1/dietlibc/include/scsi/sg.h b/mdk-stage1/dietlibc/include/scsi/sg.h
deleted file mode 100644
index 00334654e..000000000
--- a/mdk-stage1/dietlibc/include/scsi/sg.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/* Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/*
- History:
- Started: Aug 9 by Lawrence Foard (entropy@world.std.com), to allow user
- process control of SCSI devices.
- Development Sponsored by Killy Corp. NY NY
-*/
-
-#ifndef _SCSI_SG_H
-#define _SCSI_SG_H 1
-
-#include <sys/types.h>
-
-/* New interface introduced in the 3.x SG drivers follows */
-
-/* Same structure as used by readv() Linux system call. It defines one
- scatter-gather element. */
-typedef struct sg_iovec
-{
- void * iov_base; /* Starting address */
- size_t iov_len; /* Length in bytes */
-} sg_iovec_t;
-
-
-typedef struct sg_io_hdr
-{
- int interface_id; /* [i] 'S' for SCSI generic (required) */
- int dxfer_direction; /* [i] data transfer direction */
- unsigned char cmd_len; /* [i] SCSI command length ( <= 16 bytes) */
- unsigned char mx_sb_len; /* [i] max length to write to sbp */
- unsigned short int iovec_count; /* [i] 0 implies no scatter gather */
- unsigned int dxfer_len; /* [i] byte count of data transfer */
- void * dxferp; /* [i], [*io] points to data transfer memory
- or scatter gather list */
- unsigned char * cmdp; /* [i], [*i] points to command to perform */
- unsigned char * sbp; /* [i], [*o] points to sense_buffer memory */
- unsigned int timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */
- unsigned int flags; /* [i] 0 -> default, see SG_FLAG... */
- int pack_id; /* [i->o] unused internally (normally) */
- void * usr_ptr; /* [i->o] unused internally */
- unsigned char status; /* [o] scsi status */
- unsigned char masked_status;/* [o] shifted, masked scsi status */
- unsigned char msg_status; /* [o] messaging level data (optional) */
- unsigned char sb_len_wr; /* [o] byte count actually written to sbp */
- unsigned short int host_status; /* [o] errors from host adapter */
- unsigned short int driver_status;/* [o] errors from software driver */
- int resid; /* [o] dxfer_len - actual_transferred */
- unsigned int duration; /* [o] time taken by cmd (unit: millisec) */
- unsigned int info; /* [o] auxiliary information */
-} sg_io_hdr_t;
-
-
-/* Use negative values to flag difference from original sg_header structure. */
-#define SG_DXFER_NONE -1 /* e.g. a SCSI Test Unit Ready command */
-#define SG_DXFER_TO_DEV -2 /* e.g. a SCSI WRITE command */
-#define SG_DXFER_FROM_DEV -3 /* e.g. a SCSI READ command */
-#define SG_DXFER_TO_FROM_DEV -4 /* treated like SG_DXFER_FROM_DEV with the
- additional property than during indirect
- IO the user buffer is copied into the
- kernel buffers before the transfer */
-
-
-/* following flag values can be "or"-ed together */
-#define SG_FLAG_DIRECT_IO 1 /* default is indirect IO */
-#define SG_FLAG_LUN_INHIBIT 2 /* default is to put device's lun into */
- /* the 2nd byte of SCSI command */
-#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */
- /* user space (debug indirect IO) */
-
-/* The following 'info' values are "or"-ed together. */
-#define SG_INFO_OK_MASK 0x1
-#define SG_INFO_OK 0x0 /* no sense, host nor driver "noise" */
-#define SG_INFO_CHECK 0x1 /* something abnormal happened */
-
-#define SG_INFO_DIRECT_IO_MASK 0x6
-#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */
-#define SG_INFO_DIRECT_IO 0x2 /* direct IO requested and performed */
-#define SG_INFO_MIXED_IO 0x4 /* part direct, part indirect IO */
-
-
-/* Request information about a specific SG device, used by
- SG_GET_SCSI_ID ioctl (). */
-struct sg_scsi_id {
- /* Host number as in "scsi<n>" where 'n' is one of 0, 1, 2 etc. */
- int host_no;
- int channel;
- /* SCSI id of target device. */
- int scsi_id;
- int lun;
- /* TYPE_... defined in <scsi/scsi.h>. */
- int scsi_type;
- /* Host (adapter) maximum commands per lun. */
- short int h_cmd_per_lun;
- /* Device (or adapter) maximum queue length. */
- short int d_queue_depth;
- /* Unused, set to 0 for now. */
- int unused[2];
-};
-
-/* Used by SG_GET_REQUEST_TABLE ioctl(). */
-typedef struct sg_req_info {
- char req_state; /* 0 -> not used, 1 -> written, 2 -> ready to read */
- char orphan; /* 0 -> normal request, 1 -> from interruped SG_IO */
- char sg_io_owned; /* 0 -> complete with read(), 1 -> owned by SG_IO */
- char problem; /* 0 -> no problem detected, 1 -> error to report */
- int pack_id; /* pack_id associated with request */
- void * usr_ptr; /* user provided pointer (in new interface) */
- unsigned int duration; /* millisecs elapsed since written (req_state==1)
- or request duration (req_state==2) */
- int unused;
-} sg_req_info_t;
-
-
-/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow.
- [Those that only apply to the SG 2.x drivers are at the end of the file.]
- (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */
-
-#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */
-
-/* Used to configure SCSI command transformation layer for ATAPI devices */
-/* Only supported by the ide-scsi driver */
-#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */
- /* 3rd arg = 0 to disable transform, 1 to enable it */
-#define SG_GET_TRANSFORM 0x2205
-
-#define SG_SET_RESERVED_SIZE 0x2275 /* request a new reserved buffer size */
-#define SG_GET_RESERVED_SIZE 0x2272 /* actual size of reserved buffer */
-
-/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */
-#define SG_GET_SCSI_ID 0x2276 /* Yields fd's bus, chan, dev, lun + type */
-/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */
-
-/* Override host setting and always DMA using low memory ( <16MB on i386) */
-#define SG_SET_FORCE_LOW_DMA 0x2279 /* 0-> use adapter setting, 1-> force */
-#define SG_GET_LOW_DMA 0x227a /* 0-> use all ram for dma; 1-> low dma ram */
-
-/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which
- tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN.
- If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0
- then pack_id ignored by read() and oldest readable fetched. */
-#define SG_SET_FORCE_PACK_ID 0x227b
-#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */
-
-#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */
-
-/* Yields max scatter gather tablesize allowed by current host adapter */
-#define SG_GET_SG_TABLESIZE 0x227F /* 0 implies can't do scatter gather */
-
-#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */
-
-/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */
-#define SG_SCSI_RESET 0x2284
-/* Associated values that can be given to SG_SCSI_RESET follow */
-#define SG_SCSI_RESET_NOTHING 0
-#define SG_SCSI_RESET_DEVICE 1
-#define SG_SCSI_RESET_BUS 2
-#define SG_SCSI_RESET_HOST 3
-
-/* synchronous SCSI command ioctl, (only in version 3 interface) */
-#define SG_IO 0x2285 /* similar effect as write() followed by read() */
-
-#define SG_GET_REQUEST_TABLE 0x2286 /* yields table of active requests */
-
-/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */
-#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */
-#define SG_GET_KEEP_ORPHAN 0x2288
-
-
-#define SG_SCATTER_SZ (8 * 4096) /* PAGE_SIZE not available to user */
-/* Largest size (in bytes) a single scatter-gather list element can have.
- The value must be a power of 2 and <= (PAGE_SIZE * 32) [131072 bytes on
- i386]. The minimum value is PAGE_SIZE. If scatter-gather not supported
- by adapter then this value is the largest data block that can be
- read/written by a single scsi command. The user can find the value of
- PAGE_SIZE by calling getpagesize() defined in unistd.h . */
-
-#define SG_DEFAULT_RETRIES 1
-
-/* Defaults, commented if they differ from original sg driver */
-#define SG_DEF_FORCE_LOW_DMA 0 /* was 1 -> memory below 16MB on i386 */
-#define SG_DEF_FORCE_PACK_ID 0
-#define SG_DEF_KEEP_ORPHAN 0
-#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */
-
-/* maximum outstanding requests, write() yields EDOM if exceeded */
-#define SG_MAX_QUEUE 16
-
-#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE /* for backward compatibility */
-
-/* Alternate style type names, "..._t" variants preferred */
-typedef struct sg_io_hdr Sg_io_hdr;
-typedef struct sg_io_vec Sg_io_vec;
-typedef struct sg_scsi_id Sg_scsi_id;
-typedef struct sg_req_info Sg_req_info;
-
-
-/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */
-/* The older SG interface based on the 'sg_header' structure follows. */
-/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */
-
-#define SG_MAX_SENSE 16 /* this only applies to the sg_header interface */
-
-struct sg_header
- {
- /* Length of incoming packet (including header). */
- int pack_len;
- /* Maximal length of expected reply. */
- int reply_len;
- /* Id number of packet. */
- int pack_id;
- /* 0==ok, otherwise error number. */
- int result;
- /* Force 12 byte command length for group 6 & 7 commands. */
- unsigned int twelve_byte:1;
- /* SCSI status from target. */
- unsigned int target_status:5;
- /* Host status (see "DID" codes). */
- unsigned int host_status:8;
- /* Driver status+suggestion. */
- unsigned int driver_status:8;
- /* Unused. */
- unsigned int other_flags:10;
- /* Output in 3 cases:
- when target_status is CHECK_CONDITION or
- when target_status is COMMAND_TERMINATED or
- when (driver_status & DRIVER_SENSE) is true. */
- unsigned char sense_buffer[SG_MAX_SENSE];
- };
-
-
-/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t
- interface is used. They are kept for backward compatibility with
- the original and version 2 drivers. */
-
-#define SG_SET_TIMEOUT 0x2201 /* Set timeout; *(int *)arg==timeout. */
-#define SG_GET_TIMEOUT 0x2202 /* Get timeout; return timeout. */
-
-/* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q). */
-#define SG_GET_COMMAND_Q 0x2270 /* Yields 0 (queuing off) or 1 (on). */
-#define SG_SET_COMMAND_Q 0x2271 /* Change queuing state with 0 or 1. */
-
-/* Turn on error sense trace (1..8), dump this device to log/console (9)
- or dump all sg device states ( >9 ) to log/console. */
-#define SG_SET_DEBUG 0x227e /* 0 -> turn off debug */
-
-#define SG_NEXT_CMD_LEN 0x2283 /* Override SCSI command length with given
- number on the next write() on this file
- descriptor. */
-
-/* Defaults, commented if they differ from original sg driver */
-#define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */
-#define SG_DEF_COMMAND_Q 0 /* command queuing is always on when
- the new interface is used */
-#define SG_DEF_UNDERRUN_FLAG 0
-
-
-#endif /* scsi/sg.h */
diff --git a/mdk-stage1/dietlibc/include/setjmp.h b/mdk-stage1/dietlibc/include/setjmp.h
deleted file mode 100644
index 66fc288f4..000000000
--- a/mdk-stage1/dietlibc/include/setjmp.h
+++ /dev/null
@@ -1,123 +0,0 @@
-#ifndef _SETJMP_H
-#define _SETJMP_H
-
-#include <sys/cdefs.h>
-
-#ifdef __i386__
-#ifndef __ASSEMBLER__
-typedef int __jmp_buf[6];
-#endif
-# define JB_BX 0
-# define JB_SI 1
-# define JB_DI 2
-# define JB_BP 3
-# define JB_SP 4
-# define JB_PC 5
-# define JB_SIZE 24
-#endif
-
-#ifdef __alpha__
-#define JB_S0 0
-#define JB_S1 1
-#define JB_S2 2
-#define JB_S3 3
-#define JB_S4 4
-#define JB_S5 5
-#define JB_PC 6
-#define JB_FP 7
-#define JB_SP 8
-#define JB_F2 9
-#define JB_F3 10
-#define JB_F4 11
-#define JB_F5 12
-#define JB_F6 13
-#define JB_F7 14
-#define JB_F8 15
-#define JB_F9 16
-#ifndef __ASSEMBLER__
-typedef long int __jmp_buf[17];
-#endif
-#endif
-
-#ifdef __mips__
-#ifndef __ASSEMBLER__
-typedef struct
- {
- void * __pc; /* Program counter. */
- void * __sp; /* Stack pointer. */
- int __regs[8]; /* Callee-saved registers s0 through s7. */
- void * __fp; /* The frame pointer. */
- void * __gp; /* The global pointer. */
- int __fpc_csr; /* Floating point status register. */
- double __fpregs[6]; /* Callee-saved floating point registers. */
- } __jmp_buf[1];
-#endif
-#endif
-
-#ifdef __sparc__
-#define JB_SP 0
-#define JB_FP 1
-#define JB_PC 2
-#ifndef __ASSEMBLER__
-typedef int __jmp_buf[3];
-#endif
-#endif
-
-#ifdef __arm__
-#define __JMP_BUF_SP 8
-#ifndef __ASSEMBLER__
-typedef int __jmp_buf[10];
-#endif
-#endif
-
-#ifdef __powerpc__
-# define JB_GPR1 0 /* Also known as the stack pointer */
-# define JB_GPR2 1
-# define JB_LR 2 /* The address we will return to */
-# define JB_GPRS 3 /* GPRs 14 through 31 are saved, 18 in total */
-# define JB_CR 21 /* Condition code registers. */
-# define JB_FPRS 22 /* FPRs 14 through 31 are saved, 18*2 words total */
-# define JB_SIZE (58*4)
-#ifndef __ASSEMBLER__
-typedef long int __jmp_buf[58];
-#endif
-#endif
-
-#ifndef __ASSEMBLER__
-
-typedef int sig_atomic_t;
-#define __sig_atomic_t sig_atomic_t
-
-# define _SIGSET_NWORDS (1024 / (8 * sizeof (unsigned long int)))
-typedef struct
- {
- unsigned long int __val[_SIGSET_NWORDS];
- } __sigset_t;
-
-/* Calling environment, plus possibly a saved signal mask. */
-typedef struct __jmp_buf_tag /* C++ doesn't like tagless structs. */
- {
- /* NOTE: The machine-dependent definitions of `__sigsetjmp'
- assume that a `jmp_buf' begins with a `__jmp_buf'.
- Do not move this member or add others before it. */
- __jmp_buf __jmpbuf; /* Calling environment. */
- int __mask_was_saved; /* Saved the signal mask? */
- __sigset_t __saved_mask; /* Saved signal mask. */
- } jmp_buf[1];
-
-extern int __sigsetjmp (jmp_buf __env, int __savemask) __THROW;
-
-extern void longjmp (jmp_buf __env, int __val)
- __THROW __attribute__ ((__noreturn__));
-
-typedef jmp_buf sigjmp_buf;
-
-extern void siglongjmp (sigjmp_buf __env, int __val)
- __THROW __attribute__ ((__noreturn__));
-
-#define setjmp(env) __sigsetjmp(env,0)
-#define sigsetjmp(a,b) __sigsetjmp(a,b)
-
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/shadow.h b/mdk-stage1/dietlibc/include/shadow.h
deleted file mode 100644
index 4d6341af1..000000000
--- a/mdk-stage1/dietlibc/include/shadow.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _SHADOW_H
-#define _SHADOW_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-struct spwd {
- char *sp_namp; /* user login name */
- char *sp_pwdp; /* encrypted password */
- long sp_lstchg; /* last password change */
- int sp_min; /* days until change allowed. */
- int sp_max; /* days before change required */
- int sp_warn; /* days warning for expiration */
- int sp_inact; /* days before account inactive */
- int sp_expire; /* date when account expires */
- int sp_flag; /* reserved for future use */
-};
-
-extern struct spwd *getspent(void) __THROW;
-extern void setspent(void) __THROW;
-extern void endspent(void) __THROW;
-extern struct spwd *getspnam (__const char *__name) __THROW;
-
-#endif /* _SHADOW_H */
diff --git a/mdk-stage1/dietlibc/include/signal.h b/mdk-stage1/dietlibc/include/signal.h
deleted file mode 100644
index 9ed93fe83..000000000
--- a/mdk-stage1/dietlibc/include/signal.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _SIGNAL_H
-#define _SIGNAL_H
-
-#include <sys/cdefs.h>
-
-#define __WANT_POSIX1B_SIGNALS__
-
-#include <linux/types.h>
-#include <linux/signal.h>
-
-typedef void (*sighandler_t)(int);
-
-int sigemptyset(sigset_t *set) __THROW;
-int sigfillset(sigset_t *set) __THROW;
-int sigaddset(sigset_t *set, int signum) __THROW;
-int sigdelset(sigset_t *set, int signum) __THROW;
-int sigprocmask(int how, const sigset_t *set, sigset_t *oldset) __THROW;
-sighandler_t signal(int signum, sighandler_t action);
-int raise (int sig) __THROW;
-int sigaction(int signum, const struct sigaction *act, struct sigaction *oldact) __THROW;
-int sigaltstack(const struct sigaltstack *newstack, struct sigaltstack *oldstack) __THROW;
-
-#ifndef SIGCLD
-#define SIGCLD SIGCHLD
-#endif
-
-extern const char *const sys_siglist[];
-
-typedef __sighandler_t sig_t;
-
-#ifndef NSIG
-#define NSIG _NSIG
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/stdint.h b/mdk-stage1/dietlibc/include/stdint.h
deleted file mode 100644
index d287e6794..000000000
--- a/mdk-stage1/dietlibc/include/stdint.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _STDINT_H
-#define _STDINT_H
-
-#include <sys/types.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/stdio.h b/mdk-stage1/dietlibc/include/stdio.h
deleted file mode 100644
index 92d9dc0cb..000000000
--- a/mdk-stage1/dietlibc/include/stdio.h
+++ /dev/null
@@ -1,97 +0,0 @@
-#ifndef _STDIO_H
-#define _STDIO_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-typedef struct __stdio_file FILE;
-
-FILE *fopen (const char *path, const char *mode) __THROW;
-FILE *fdopen (int fildes, const char *mode) __THROW;
-FILE *freopen (const char *path, const char *mode, FILE *stream) __THROW;
-
-int printf(const char *format, ...) __THROW;
-int fprintf(FILE *stream, const char *format, ...) __THROW;
-int sprintf(char *str, const char *format, ...) __THROW;
-int snprintf(char *str, size_t size, const char *format, ...) __THROW;
-int asprintf(char **ptr, const char* format, ...) __THROW;
-
-int scanf( const char *format, ...) __THROW;
-int fscanf( FILE *stream, const char *format, ...) __THROW;
-int sscanf( const char *str, const char *format, ...) __THROW;
-
-#include <stdarg.h>
-
-int vprintf(const char *format, va_list ap) __THROW;
-int vfprintf(FILE *stream, const char *format, va_list ap) __THROW;
-int vsprintf(char *str, const char *format, va_list ap) __THROW;
-int vsnprintf(char *str, size_t size, const char *format, va_list ap) __THROW;
-
-int vscanf( const char *format, va_list ap) __THROW;
-int vsscanf( const char *str, const char *format, va_list ap) __THROW;
-int vfscanf( FILE *stream, const char *format, va_list ap) __THROW;
-
-int fgetc(FILE *stream) __THROW;
-char *fgets(char *s, int size, FILE *stream) __THROW;
-int getc(FILE *stream) __THROW;
-int getchar(void) __THROW;
-char *gets(char *s) __THROW;
-int ungetc(int c, FILE *stream) __THROW;
-
-int fputc(int c, FILE *stream) __THROW;
-int fputs(const char *s, FILE *stream) __THROW;
-
-#define putc(c,stream) fputc(c,stream)
-#define putchar(c) fputc(c,stdout)
-
-#define getchar() fgetc(stdin)
-#define getc(stream) fgetc(stream)
-
-int puts(const char *s) __THROW;
-
-long fseek( FILE *stream, long offset, int whence) __THROW;
-long ftell( FILE *stream) __THROW;
-void rewind( FILE *stream) __THROW;
-int fgetpos( FILE *stream, fpos_t *pos) __THROW;
-int fsetpos( FILE *stream, fpos_t *pos) __THROW;
-
-size_t fread( void *ptr, size_t size, size_t nmemb, FILE *stream) __THROW;
-
-size_t fwrite( const void *ptr, size_t size, size_t nmemb, FILE *stream) __THROW;
-
-int fflush(FILE *stream) __THROW;
-
-int fclose(FILE *stream) __THROW;
-
-void clearerr(FILE *stream) __THROW;
-int feof (FILE *stream) __THROW;
-int ferror( FILE *stream) __THROW;
-int fileno( FILE *stream) __THROW;
-
-int remove(const char *pathname) __THROW;
-
-void perror(const char *s) __THROW;
-
-extern FILE *stdin, *stdout, *stderr;
-
-#define EOF (int)(-1)
-
-#define BUFSIZ 128
-
-#define _IONBF 0
-#define _IOLBF 1
-#define _IOFBF 2
-
-int setvbuf(FILE *stream, char *buf, int mode , size_t size) __THROW;
-
-#define setbuf(stream,buf) setvbuf(stream,buf,buf?_IOFBF:_IONBF,BUFSIZ)
-#define setbuffer(stream,buf,size) setvbuf(stream,buf,buf?_IOFBF:_IONBF,size)
-#define setlinebuf(stream) setvbuf(stream,0,_IOLBF,BUFSIZ)
-
-FILE *popen(const char *command, const char *type) __THROW;
-int pclose(FILE *stream) __THROW;
-
-#define getc_unlocked(stream) getc(stream)
-#define putc_unlocked(c,stream) putc(c,stream)
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/stdlib.h b/mdk-stage1/dietlibc/include/stdlib.h
deleted file mode 100644
index 6a13a48ff..000000000
--- a/mdk-stage1/dietlibc/include/stdlib.h
+++ /dev/null
@@ -1,67 +0,0 @@
-#ifndef _STDLIB_H
-#define _STDLIB_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#define __LIBC_DIETLIBC__
-
-void *calloc(size_t nmemb, size_t size) __THROW;
-void *malloc(size_t size) __THROW;
-void free(void *ptr) __THROW;
-void *realloc(void *ptr, size_t size) __THROW;
-
-char *getenv(const char *name) __THROW __pure__;
-int putenv(const char *string) __THROW;
-int setenv(const char *name, const char *value, int overwrite) __THROW;
-void unsetenv(const char *name) __THROW;
-
-int atexit(void (*function)(void)) __THROW;
-
-double strtod(const char *nptr, char **endptr) __THROW;
-long int strtol(const char *nptr, char **endptr, int base) __THROW;
-unsigned long int strtoul(const char *nptr, char **endptr, int base) __THROW;
-
-int __ltostr(char *s, int size, unsigned long i, int base, char UpCase) __THROW;
-#ifdef __GNUC__
-long long int strtoll(const char *nptr, char **endptr, int base) __THROW;
-unsigned long long int strtoull(const char *nptr, char **endptr, int base) __THROW;
-int __lltostr(char *s, int size, unsigned long long i, int base, char UpCase) __THROW;
-#endif
-
-int atoi(const char *nptr) __THROW;
-long int atol(const char *nptr) __THROW;
-double atof(const char *nptr) __THROW;
-
-void exit(int status) __THROW __attribute__((noreturn));
-void abort(void) __THROW;
-
-/* warning: the rand() implementation of the diet libc really sucks. */
-#define RAND_MAX 32767
-
-extern int rand(void) __THROW;
-extern void srand(unsigned int seed) __THROW;
-
-void qsort(void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) __THROW;
-void *bsearch(const void *key, const void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) __THROW;
-
-extern char **environ;
-
-#define EXIT_SUCCESS 0
-#define EXIT_FAILURE 1
-
-/* now this function is the greatest bullshit I have ever seen.
- * The ISO people must be out of their minds. */
-typedef struct { int quot,rem; } div_t;
-div_t div(int numer, int denom) __THROW __attribute__((const));
-
-void *alloca(size_t size) __THROW; /* gcc built-in */
-
-char *realpath(const char *path, char *resolved_path) __THROW;
-
-int abs(int j) __THROW;
-
-long int random(void) __THROW;
-void srandom(unsigned int seed) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/string.h b/mdk-stage1/dietlibc/include/string.h
deleted file mode 100644
index 1ef78ae54..000000000
--- a/mdk-stage1/dietlibc/include/string.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _STRING_H
-#define _STRING_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-char *strcpy(char *dest, const char *src) __THROW;
-char *strncpy(char *dest, const char *src, size_t n) __THROW;
-
-void *memccpy(void *dest, const void *src, int c, size_t n) __THROW;
-void *memcpy(void *dest, const void *src, size_t n) __THROW;
-void *memmove(void *dest, const void *src, size_t n) __THROW;
-
-int memccmp(const void *s1, const void *s2, int c, size_t n) __THROW __pure__;
-int memcmp(const void *s1, const void *s2, size_t n) __THROW __pure__;
-int strcmp(const char *s1, const char *s2) __THROW __pure__;
-int strncmp(const char *s1, const char *s2, size_t n) __THROW __pure__;
-
-int strcasecmp(const char *s1, const char *s2) __THROW __pure__;
-int strncasecmp(const char *s1, const char *s2, size_t n) __THROW __pure__;
-
-size_t strlen(const char *s) __THROW __pure__;
-
-char *strstr(const char *haystack, const char *needle) __THROW __pure__;
-
-char *strdup(const char *s) __THROW;
-
-char *strchr(const char *s, int c) __THROW __pure__;
-char *strrchr(const char *s, int c) __THROW __pure__;
-
-char *strcat(char *dest, const char *src) __THROW;
-char *strncat(char *dest, const char *src, size_t n) __THROW;
-
-size_t strspn(const char *s, const char *accept) __THROW;
-size_t strcspn(const char *s, const char *reject) __THROW;
-
-char *strpbrk(const char *s, const char *accept) __THROW;
-char *strsep(char **stringp, const char *delim) __THROW;
-
-void* memset(void *s, int c, size_t n) __THROW;
-
-#undef NULL
-#define NULL (void*)0
-
-#define bzero(s,n) memset(s,0,n)
-#define bcopy(src,dest,n) memmove(dest,src,n)
-#define bcmp(a,b,n) memcmp(a,b,n)
-
-char *strerror(int errnum) __THROW;
-char *strsignal(int signum) __THROW;
-
-char *strtok(char *s, const char *delim) __THROW;
-char *strtok_r(char *s, const char *delim, char **ptrptr) __THROW;
-
-int ffs(int i) __THROW __attribute__((__const__));
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/strings.h b/mdk-stage1/dietlibc/include/strings.h
deleted file mode 100644
index ec947a9b9..000000000
--- a/mdk-stage1/dietlibc/include/strings.h
+++ /dev/null
@@ -1,2 +0,0 @@
-#warning "your code included obsolescent <strings.h>. Please change that to <string.h>!"
-#include <string.h>
diff --git a/mdk-stage1/dietlibc/include/sys/cdefs.h b/mdk-stage1/dietlibc/include/sys/cdefs.h
deleted file mode 100644
index 895bb74b8..000000000
--- a/mdk-stage1/dietlibc/include/sys/cdefs.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef _SYS_CDEFS_H
-#define _SYS_CDEFS_H
-
-#define __dietlibc__
-
-#ifndef __cplusplus
-#define throw ()
-#define __THROW
-#define __BEGIN_DECLS
-#define __END_DECLS
-#else
-#define __THROW throw ()
-#define __BEGIN_DECLS extern "C" {
-#define __END_DECLS }
-#endif
-
-#ifndef __GNUC__
-#define __attribute__(xyz)
-#endif
-
-#define __pure__
-#ifdef __GNUC__
-#if (__GNUC__ > 2) || ((__GNUC__ == 2) && (__GNUC_MINOR__ >= 96))
-#undef __pure__
-#define __pure__ __attribute__ ((__pure__))
-#endif
-
-#if (__GNUC__ == 2) && (__GNUC_MINOR__ < 95)
-#define __restrict__
-#endif
-
-#endif
-
-#define __P(x) x
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/file.h b/mdk-stage1/dietlibc/include/sys/file.h
deleted file mode 100644
index 93787fd42..000000000
--- a/mdk-stage1/dietlibc/include/sys/file.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _SYS_FILE_H
-#define _SYS_FILE_H
-
-#include <sys/cdefs.h>
-
-extern int fcntl(int fd, int cmd, ...) __THROW;
-extern int flock(int fd, int operation) __THROW;
-
-/* Operations for the `flock' call. */
-#define LOCK_SH 1 /* Shared lock. */
-#define LOCK_EX 2 /* Exclusive lock. */
-#define LOCK_UN 8 /* Unlock. */
-
-/* Can be OR'd in to one of the above. */
-#define LOCK_NB 4 /* Don't block when locking. */
-
-
-
-#endif /* _SYS_FILE_H */
diff --git a/mdk-stage1/dietlibc/include/sys/io.h b/mdk-stage1/dietlibc/include/sys/io.h
deleted file mode 100644
index cce841735..000000000
--- a/mdk-stage1/dietlibc/include/sys/io.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _IO_H
-#define _IO_H
-
-int ioperm(unsigned long from, unsigned long num, int turn_on) __THROW;
-
-#ifdef __i386__
-
-static __inline void
-outb (unsigned char value, unsigned short int port)
-{
- __asm__ __volatile__ ("outb %b0,%w1": :"a" (value), "Nd" (port));
-}
-
-static __inline unsigned char
-inb (unsigned short int port)
-{
- unsigned char _v;
-
- __asm__ __volatile__ ("inb %w1,%0":"=a" (_v):"Nd" (port));
- return _v;
-}
-
-static __inline unsigned short int
-inw (unsigned short int port)
-{
- unsigned short _v;
-
- __asm__ __volatile__ ("inw %w1,%0":"=a" (_v):"Nd" (port));
- return _v;
-}
-
-static __inline void
-outw (unsigned short int value, unsigned short int port)
-{
- __asm__ __volatile__ ("outw %w0,%w1": :"a" (value), "Nd" (port));
-
-}
-
-#endif
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/ioctl.h b/mdk-stage1/dietlibc/include/sys/ioctl.h
deleted file mode 100644
index fca1aeeab..000000000
--- a/mdk-stage1/dietlibc/include/sys/ioctl.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _IOCTL_H
-#define _IOCTL_H
-
-#include <sys/cdefs.h>
-#include <linux/ioctl.h>
-#include <asm/ioctls.h>
-
-int ioctl(int d, int request, ...) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/ipc.h b/mdk-stage1/dietlibc/include/sys/ipc.h
deleted file mode 100644
index 9184a2a82..000000000
--- a/mdk-stage1/dietlibc/include/sys/ipc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SYS_IPC_H
-#define _SYS_IPC_H
-
-#include <sys/cdefs.h>
-#include <linux/ipc.h>
-#include <asm/page.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/kd.h b/mdk-stage1/dietlibc/include/sys/kd.h
deleted file mode 100644
index 9e9a5152b..000000000
--- a/mdk-stage1/dietlibc/include/sys/kd.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SYS_KD_H
-#define _SYS_KD_H
-
-#include <linux/kd.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/mman.h b/mdk-stage1/dietlibc/include/sys/mman.h
deleted file mode 100644
index dc398ba90..000000000
--- a/mdk-stage1/dietlibc/include/sys/mman.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _SYS_MMAN_H
-#define _SYS_MMAN_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <linux/mman.h>
-#include <asm/page.h>
-
-#ifndef PAGE_SIZE
-#warning PAGE_SIZE undefined
-#endif
-
-#define MAP_FAILED ((void *) -1)
-
-extern void *mmap (void *__addr, size_t __len, int __prot,
- int __flags, int __fd, off_t __offset);
-
-extern int munmap (void *__addr, size_t __len) __THROW;
-extern int mprotect (void *__addr, size_t __len, int __prot) __THROW;
-extern int msync (void *__addr, size_t __len, int __flags) __THROW;
-extern void *mremap (void *__addr, size_t __old_len, size_t __new_len,
- int __may_move) __THROW;
-extern int mincore (void *__start, size_t __len, unsigned char *__vec);
-
-#ifdef __quad_t
-extern void *mmap64 (void *__addr, size_t __len, int __prot,
- int __flags, int __fd, off64_t __offset) __THROW;
-#endif
-
-int mlockall(int flags) __THROW;
-int munlockall(void) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/mount.h b/mdk-stage1/dietlibc/include/sys/mount.h
deleted file mode 100644
index 2e9e86774..000000000
--- a/mdk-stage1/dietlibc/include/sys/mount.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _SYS_MOUNT_H
-#define _SYS_MOUNT_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <linux/fs.h>
-
-int mount(const char* specialfile, const char* dir, const char* filesystemtype,
- unsigned long rwflag, const void * data) __THROW;
-
-int umount(const char *specialfile) __THROW;
-
-int umount(const char *dir) __THROW;
-
-int umount2(const char *specialfile, int mflag) __THROW;
-
-int umount2(const char *dir, int mflag) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/msg.h b/mdk-stage1/dietlibc/include/sys/msg.h
deleted file mode 100644
index ea1e470b6..000000000
--- a/mdk-stage1/dietlibc/include/sys/msg.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef _SYS_MSG_H
-#define _SYS_MSG_H
-
-#include <linux/msg.h>
-#include <sys/ipc.h>
-#include <asm/page.h>
-
-extern int msgctl (int msqid, int cmd, struct msqid_ds *buf) __THROW;
-extern int msgget (key_t key, int msgflg) __THROW;
-extern int msgrcv (int msqid, void *msgp, size_t msgsz, long int msgtyp, int msgflg) __THROW;
-extern int msgsnd (int msqid, const void *msgp, size_t msgsz, int msgflg) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/mtio.h b/mdk-stage1/dietlibc/include/sys/mtio.h
deleted file mode 100644
index e70663407..000000000
--- a/mdk-stage1/dietlibc/include/sys/mtio.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SYS_MTIO_H
-#define _SYS_MTIO_H
-
-#include <linux/mtio.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/param.h b/mdk-stage1/dietlibc/include/sys/param.h
deleted file mode 100644
index 05f4d40e2..000000000
--- a/mdk-stage1/dietlibc/include/sys/param.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SYS_PARAM_H
-#define _SYS_PARAM_H
-
-#include <limits.h>
-
-#define MAXPATHLEN PATH_MAX
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/poll.h b/mdk-stage1/dietlibc/include/sys/poll.h
deleted file mode 100644
index adce26687..000000000
--- a/mdk-stage1/dietlibc/include/sys/poll.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _SYS_POLL_H
-#define _SYS_POLL_H
-
-#include <sys/cdefs.h>
-
-#include <linux/poll.h>
-
-extern int poll(struct pollfd *ufds, unsigned int nfds, int timeout) __THROW;
-
-
-#endif /* _SYS_POLL_H */
diff --git a/mdk-stage1/dietlibc/include/sys/ptrace.h b/mdk-stage1/dietlibc/include/sys/ptrace.h
deleted file mode 100644
index 9dd730bc6..000000000
--- a/mdk-stage1/dietlibc/include/sys/ptrace.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _SYS_PTRACE_H
-#define _SYS_PTRACE_H
-
-#include <sys/cdefs.h>
-
-#include <linux/ptrace.h>
-
-extern long int ptrace (int request, ...) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/reboot.h b/mdk-stage1/dietlibc/include/sys/reboot.h
deleted file mode 100644
index ba58d296a..000000000
--- a/mdk-stage1/dietlibc/include/sys/reboot.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _SYS_REBOOT_H
-#define _SYS_REBOOT_H
-
-#include <linux/reboot.h>
-
-/* Reboot or halt the system. */
-int reboot (int flag, void *arg);
-
-#endif /* _SYS_REBOOT_H */
diff --git a/mdk-stage1/dietlibc/include/sys/resource.h b/mdk-stage1/dietlibc/include/sys/resource.h
deleted file mode 100644
index 442434cd1..000000000
--- a/mdk-stage1/dietlibc/include/sys/resource.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _SYS_RESOURCE_H
-#define _SYS_RESOURCE_H
-
-#include <sys/cdefs.h>
-#include <linux/resource.h>
-
-int getpriority(int which, int who) __THROW;
-int setpriority(int which, int who, int prio) __THROW;
-
-int getrlimit (int resource, struct rlimit *rlim);
-int getrusage (int who, struct rusage *usage);
-int setrlimit (int resource, const struct rlimit *rlim);
-
-typedef unsigned long rlim_t;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/select.h b/mdk-stage1/dietlibc/include/sys/select.h
deleted file mode 100644
index e69de29bb..000000000
--- a/mdk-stage1/dietlibc/include/sys/select.h
+++ /dev/null
diff --git a/mdk-stage1/dietlibc/include/sys/sem.h b/mdk-stage1/dietlibc/include/sys/sem.h
deleted file mode 100644
index cc182649c..000000000
--- a/mdk-stage1/dietlibc/include/sys/sem.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _SYS_SEM_H
-#define _SYS_SEM_H
-
-#include <linux/sem.h>
-#include <sys/ipc.h>
-
-extern int semget( key_t key, int nsems, int semflg) __THROW;
-extern int semctl(int semid, int semnum, int cmd, union semun arg) __THROW;
-extern int semop(int semid, struct sembuf *sops, unsigned nsops) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/sendfile.h b/mdk-stage1/dietlibc/include/sys/sendfile.h
deleted file mode 100644
index 2e0c04add..000000000
--- a/mdk-stage1/dietlibc/include/sys/sendfile.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _SYS_SENDFILE_H
-#define _SYS_SENDFILE_H
-
-#include <sys/cdefs.h>
-
-extern ssize_t sendfile (int __out_fd, int __in_fd, off_t *offset,
- size_t __count) __THROW;
-
-#endif /* sys/sendfile.h */
diff --git a/mdk-stage1/dietlibc/include/sys/shm.h b/mdk-stage1/dietlibc/include/sys/shm.h
deleted file mode 100644
index c27f5ddcf..000000000
--- a/mdk-stage1/dietlibc/include/sys/shm.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef _SYS_SHM_H
-#define _SYS_SHM_H
-
-#include <linux/shm.h>
-#include <sys/ipc.h>
-#include <asm/page.h>
-
-#ifndef PAGE_SIZE
-#define PAGE_SIZE getpagesize()
-#endif
-
-extern int shmget(key_t key, int size, int shmflg) __THROW;
-extern void *shmat(int shmid, const void *shmaddr, int shmflg) __THROW;
-extern int shmdt (const void *shmaddr) __THROW;
-extern int shmctl(int shmid, int cmd, struct shmid_ds *buf) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/signal.h b/mdk-stage1/dietlibc/include/sys/signal.h
deleted file mode 100644
index 2e602dad8..000000000
--- a/mdk-stage1/dietlibc/include/sys/signal.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <signal.h>
diff --git a/mdk-stage1/dietlibc/include/sys/socket.h b/mdk-stage1/dietlibc/include/sys/socket.h
deleted file mode 100644
index a1435501c..000000000
--- a/mdk-stage1/dietlibc/include/sys/socket.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _SYS_SOCKET_H
-#define _SYS_SOCKET_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <linux/socket.h>
-
-#ifndef SOCK_DGRAM
-/* the Linux kernel headers suck really badly on non-x86 */
-#define SOCK_STREAM 1 /* stream (connection) socket */
-#define SOCK_DGRAM 2 /* datagram (conn.less) socket */
-#define SOCK_RAW 3 /* raw socket */
-#define SOCK_RDM 4 /* reliably-delivered message */
-#define SOCK_SEQPACKET 5 /* sequential packet socket */
-#define SOCK_PACKET 10 /* linux specific way of */
-#endif
-
-struct sockaddr_storage {
- char __tmp[sizeof(struct sockaddr)];
-};
-
-int socket(int domain, int type, int protocol) __THROW;
-int accept(int s, struct sockaddr *addr, socklen_t *addrlen) __THROW;
-int connect(int sockfd, const struct sockaddr *serv_addr, socklen_t addrlen) __THROW;
-int bind(int sockfd, struct sockaddr *my_addr, socklen_t addrlen) __THROW;
-int recv(int s, void *buf, size_t len, int flags) __THROW;
-int recvfrom(int s, void *buf, size_t len, int flags, struct sockaddr *from, socklen_t *fromlen) __THROW;
-int recvmsg(int s, struct msghdr *msg, int flags) __THROW;
-int send(int s, const void *msg, size_t len, int flags) __THROW;
-int sendto(int s, const void *msg, size_t len, int flags, const struct sockaddr *to, socklen_t tolen) __THROW;
-int sendmsg(int s, const struct msghdr *msg, int flags) __THROW;
-
-int getpeername(int s, struct sockaddr *name, socklen_t *namelen) __THROW;
-int getsockname(int s , struct sockaddr * name , socklen_t * namelen) __THROW;
-
-int getsockopt(int s, int level, int optname, void *optval, socklen_t *optlen) __THROW;
-int setsockopt(int s, int level, int optname, const void *optval, socklen_t optlen) __THROW;
-
-int listen(int s, int backlog) __THROW;
-
-#define SHUT_RD 0
-#define SHUT_WR 1
-#define SHUT_RDWR 2
-int shutdown(int s, int how) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/stat.h b/mdk-stage1/dietlibc/include/sys/stat.h
deleted file mode 100644
index 10fddfa42..000000000
--- a/mdk-stage1/dietlibc/include/sys/stat.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef _SYS_STAT_H
-#define _SYS_STAT_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <linux/stat.h>
-#include <asm/stat.h>
-
-#ifndef STAT64_HAS_BROKEN_ST_INO
-#define __NO_STAT64
-#endif
-
-extern int stat(const char *__file, struct stat *__buf) __THROW;
-extern int fstat(int __fd, struct stat *__buf) __THROW;
-extern int lstat(const char *__file, struct stat *__buf) __THROW;
-
-#ifdef __NO_STAT64
-#undef _FILE_OFFSET_BITS
-#else
-extern int stat64(const char *__file, struct stat64 *__buf) __THROW;
-extern int fstat64(int __fd, struct stat64 *__buf) __THROW;
-extern int lstat64(const char *__file, struct stat64 *__buf) __THROW;
-#endif
-
-#if _FILE_OFFSET_BITS == 64
-#define lstat(file,buf) lstat64(file,buf)
-#define fstat(file,buf) fstat64(file,buf)
-#define stat stat64
-#endif
-
-#define major(dev) (((dev)>>8) & 0xff)
-#define minor(dev) ((dev) & 0xff)
-#define makedev(major, minor) ((((unsigned int) (major)) << 8) | ((unsigned int) (minor)))
-
-extern int chmod (const char *__file, mode_t __mode) __THROW;
-
-extern int fchmod (int __fd, mode_t __mode) __THROW;
-
-extern mode_t umask (mode_t __mask) __THROW;
-
-extern int mkdir (const char *__path, mode_t __mode) __THROW;
-
-extern int mknod (const char *__path, mode_t __mode, dev_t __dev) __THROW;
-
-extern int mkfifo (const char *__path, mode_t __mode) __THROW;
-
-#define S_IREAD S_IRUSR
-#define S_IWRITE S_IWUSR
-#define S_IEXEC S_IXUSR
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/syscall.h b/mdk-stage1/dietlibc/include/sys/syscall.h
deleted file mode 100644
index 5d6b5a4ad..000000000
--- a/mdk-stage1/dietlibc/include/sys/syscall.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _SYSCALL_H
-#define _SYSCALL_H
-
-#include <asm/unistd.h>
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/sysinfo.h b/mdk-stage1/dietlibc/include/sys/sysinfo.h
deleted file mode 100644
index 5f059d469..000000000
--- a/mdk-stage1/dietlibc/include/sys/sysinfo.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _SYS_SYSINFO_H
-#define _SYS_SYSINFO_H
-
-#include <sys/cdefs.h>
-#include <linux/kernel.h>
-
-int sysinfo(struct sysinfo *info) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/syslog.h b/mdk-stage1/dietlibc/include/sys/syslog.h
deleted file mode 100644
index 91bf0d1fa..000000000
--- a/mdk-stage1/dietlibc/include/sys/syslog.h
+++ /dev/null
@@ -1,102 +0,0 @@
-#ifndef _SYS_SYSLOG_H
-#define _SYS_SYSLOG_H 1
-
-#include <sys/cdefs.h>
-#include <stdarg.h>
-
-#define _PATH_LOG "/dev/log"
-
-/*
- * priorities/facilities are encoded into a single 32-bit quantity, where the
- * bottom 3 bits are the priority (0-7) and the top 28 bits are the facility
- * (0-big number). Both the priorities and the facilities map roughly
- * one-to-one to strings in the syslogd(8) source code. This mapping is
- * included in this file.
- *
- * priorities (these are ordered)
- */
-#define LOG_EMERG 0 /* system is unusable */
-#define LOG_ALERT 1 /* action must be taken immediately */
-#define LOG_CRIT 2 /* critical conditions */
-#define LOG_ERR 3 /* error conditions */
-#define LOG_WARNING 4 /* warning conditions */
-#define LOG_NOTICE 5 /* normal but significant condition */
-#define LOG_INFO 6 /* informational */
-#define LOG_DEBUG 7 /* debug-level messages */
-
-#define LOG_PRIMASK 0x07 /* mask to extract priority part (internal) */
- /* extract priority */
-#define LOG_PRI(p) ((p) & LOG_PRIMASK)
-#define LOG_MAKEPRI(fac, pri) (((fac) << 3) | (pri))
-
-/* facility codes */
-#define LOG_KERN (0<<3) /* kernel messages */
-#define LOG_USER (1<<3) /* random user-level messages */
-#define LOG_MAIL (2<<3) /* mail system */
-#define LOG_DAEMON (3<<3) /* system daemons */
-#define LOG_AUTH (4<<3) /* security/authorization messages */
-#define LOG_SYSLOG (5<<3) /* messages generated internally by syslogd */
-#define LOG_LPR (6<<3) /* line printer subsystem */
-#define LOG_NEWS (7<<3) /* network news subsystem */
-#define LOG_UUCP (8<<3) /* UUCP subsystem */
-#define LOG_CRON (9<<3) /* clock daemon */
-#define LOG_AUTHPRIV (10<<3) /* security/authorization messages (private) */
-#define LOG_FTP (11<<3) /* ftp daemon */
-
- /* other codes through 15 reserved for system use */
-#define LOG_LOCAL0 (16<<3) /* reserved for local use */
-#define LOG_LOCAL1 (17<<3) /* reserved for local use */
-#define LOG_LOCAL2 (18<<3) /* reserved for local use */
-#define LOG_LOCAL3 (19<<3) /* reserved for local use */
-#define LOG_LOCAL4 (20<<3) /* reserved for local use */
-#define LOG_LOCAL5 (21<<3) /* reserved for local use */
-#define LOG_LOCAL6 (22<<3) /* reserved for local use */
-#define LOG_LOCAL7 (23<<3) /* reserved for local use */
-
-#define LOG_NFACILITIES 24 /* current number of facilities */
-#define LOG_FACMASK 0x03f8 /* mask to extract facility part */
- /* facility of pri */
-#define LOG_FAC(p) (((p) & LOG_FACMASK) >> 3)
-
-/*
- * arguments to setlogmask.
- */
-#define LOG_MASK(pri) (1 << (pri)) /* mask for one priority */
-#define LOG_UPTO(pri) ((1 << ((pri)+1)) - 1) /* all priorities through pri */
-
-/*
- * Option flags for openlog.
- *
- * LOG_ODELAY no longer does anything.
- * LOG_NDELAY is the inverse of what it used to be.
- */
-#define LOG_PID 0x01 /* log the pid with each message */
-#define LOG_CONS 0x02 /* log on the console if errors in sending */
-#define LOG_ODELAY 0x04 /* delay open until first syslog() (default) */
-#define LOG_NDELAY 0x08 /* don't delay open */
-#define LOG_NOWAIT 0x10 /* don't wait for console forks: DEPRECATED */
-#define LOG_PERROR 0x20 /* log to stderr as well */
-
-/* Open connection to system logger. */
-/* against the glibc-routine ident has not to be const ! */
-/* instead ident is limited to 80 characters ! */
-void openlog (const char *ident, int option, int facility);
-
-void closelog (void) __THROW;
-
-int setlogmask (int mask) __THROW;
-
-void syslog (int priority, const char *format, ...) __THROW;
-
-void vsyslog (int priority, const char *format, va_list arg_ptr) __THROW;
-
-/* yuck yuck yuck, only needed for syslogd. */
-typedef struct _code {
- char *c_name;
- int c_val;
-} CODE;
-
-extern CODE prioritynames[];
-extern CODE facilitynames[];
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/time.h b/mdk-stage1/dietlibc/include/sys/time.h
deleted file mode 100644
index 11144f57b..000000000
--- a/mdk-stage1/dietlibc/include/sys/time.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _SYS_TIME_H
-#define _SYS_TIME_H 1
-
-#include <sys/cdefs.h>
-
-#include <sys/types.h>
-#include <linux/time.h>
-
-#if defined __USE_GNU || defined __USE_BSD
-typedef struct timezone *__timezone_ptr_t;
-#else
-typedef void *__timezone_ptr_t;
-#endif
-
-int getitimer(int which, struct itimerval *value) __THROW;
-int setitimer(int which, const struct itimerval *value, struct itimerval *ovalue) __THROW;
-
-int gettimeofday(struct timeval *tv, struct timezone *tz) __THROW;
-int settimeofday(const struct timeval *tv , const struct timezone *tz) __THROW;
-
-extern int adjtime (const struct timeval *__delta,
- struct timeval *__olddelta) __THROW;
-
-struct tm
-{
- int tm_sec; /* Seconds. [0-60] (1 leap second) */
- int tm_min; /* Minutes. [0-59] */
- int tm_hour; /* Hours. [0-23] */
- int tm_mday; /* Day. [1-31] */
- int tm_mon; /* Month. [0-11] */
- int tm_year; /* Year - 1900. */
- int tm_wday; /* Day of week. [0-6] */
- int tm_yday; /* Days in year.[0-365] */
- int tm_isdst; /* DST. [-1/0/1]*/
-
- long int tm_gmtoff; /* Seconds east of UTC. */
- const char *tm_zone; /* Timezone abbreviation. */
-};
-
-struct tm* gmtime(const time_t *t) __THROW;
-struct tm* gmtime_r(const time_t *t, struct tm *r) __THROW;
-
-struct tm* localtime(const time_t *t) __THROW;
-struct tm* localtime_r(const time_t *t, struct tm *r) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/times.h b/mdk-stage1/dietlibc/include/sys/times.h
deleted file mode 100644
index 72ec62fec..000000000
--- a/mdk-stage1/dietlibc/include/sys/times.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SYS_TIMES_H
-#define _SYS_TIMES_H
-
-#include <linux/times.h>
-
-clock_t times(struct tms *buf);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/types.h b/mdk-stage1/dietlibc/include/sys/types.h
deleted file mode 100644
index 34dbaa9f1..000000000
--- a/mdk-stage1/dietlibc/include/sys/types.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _SYS_TYPES_H
-#define _SYS_TYPES_H
-
-#include <linux/types.h>
-#include <linux/posix_types.h>
-#include <linux/socket.h>
-
-#ifdef __GNUC__
-#define __quad_t __quad_t
-typedef long long int __quad_t;
-typedef unsigned long long int __u_quad_t;
-#else
-#warning no long long support - no 64 bit file I/O support
-typedef long int __quad_t;
-typedef unsigned long int __u_quad_t;
-#endif
-
-
-#ifdef __quad_t
-typedef __quad_t off64_t;
-typedef __u_quad_t ino64_t;
-typedef __quad_t blkcnt64_t;
-#endif
-
-typedef long int fpos_t;
-
-#define socklen_t socklen_t
-typedef unsigned int socklen_t;
-
-typedef long int blksize_t;
-typedef long int blkcnt_t;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/uio.h b/mdk-stage1/dietlibc/include/sys/uio.h
deleted file mode 100644
index d64fd33c9..000000000
--- a/mdk-stage1/dietlibc/include/sys/uio.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _SYS_UIO
-#define _SYS_UIO 1
-
-#include <linux/uio.h>
-
-int readv(int filedes, const struct iovec *vector, size_t count);
-int writev(int filedes, const struct iovec *vector, size_t count);
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/un.h b/mdk-stage1/dietlibc/include/sys/un.h
deleted file mode 100644
index 213d9290e..000000000
--- a/mdk-stage1/dietlibc/include/sys/un.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _SYS_UN_H
-#define _SYS_UN_H
-
-#include <sys/cdefs.h>
-
-#include <linux/un.h>
-
-#endif /* sys/un.h */
diff --git a/mdk-stage1/dietlibc/include/sys/utsname.h b/mdk-stage1/dietlibc/include/sys/utsname.h
deleted file mode 100644
index 37bf6c811..000000000
--- a/mdk-stage1/dietlibc/include/sys/utsname.h
+++ /dev/null
@@ -1,35 +0,0 @@
-#ifndef _SYS_UTSNAME_H
-#define _SYS_UTSNAME_H 1
-
-#include <sys/cdefs.h>
-
-/* Length of the entries in `struct utsname' is 65. */
-#define _UTSNAME_LENGTH 65
-#define _UTSNAME_NODENAME_LENGTH _UTSNAME_LENGTH
-
-/* Linux provides as additional information in the `struct utsname'
- the name of the current domain. Define _UTSNAME_DOMAIN_LENGTH
- to a value != 0 to activate this entry. */
-#define _UTSNAME_DOMAIN_LENGTH _UTSNAME_LENGTH
-
-struct utsname {
- /* Name of the implementation of the operating system. */
- char sysname[_UTSNAME_LENGTH];
-
- /* Name of this node on the network. */
- char nodename[_UTSNAME_NODENAME_LENGTH];
-
- /* Current release level of this implementation. */
- char release[_UTSNAME_LENGTH];
- /* Current version level of this release. */
- char version[_UTSNAME_LENGTH];
-
- /* Name of the hardware type the system is running on. */
- char machine[_UTSNAME_LENGTH];
-
- /* Name of the domain of this node on the network. */
- char domainname[_UTSNAME_DOMAIN_LENGTH];
-};
-
-extern int uname (struct utsname *__name) __THROW;
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/vfs.h b/mdk-stage1/dietlibc/include/sys/vfs.h
deleted file mode 100644
index e4740a225..000000000
--- a/mdk-stage1/dietlibc/include/sys/vfs.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef _SYS_VFS_H
-#define _SYS_VFS_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <linux/vfs.h>
-
-int statfs(const char *path, struct statfs *buf) __THROW;
-int fstatfs(int fd, struct statfs *buf) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/sys/wait.h b/mdk-stage1/dietlibc/include/sys/wait.h
deleted file mode 100644
index eb70112e2..000000000
--- a/mdk-stage1/dietlibc/include/sys/wait.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#ifndef _SYS_WAIT_H
-#define _SYS_WAIT_H
-
-#include <sys/cdefs.h>
-#include <sys/resource.h>
-#include <linux/wait.h>
-
-/* If WIFEXITED(STATUS), the low-order 8 bits of the status. */
-#define __WEXITSTATUS(status) (((status) & 0xff00) >> 8)
-#define WEXITSTATUS __WEXITSTATUS
-
-/* If WIFSIGNALED(STATUS), the terminating signal. */
-#define __WTERMSIG(status) ((status) & 0x7f)
-#define WTERMSIG __WTERMSIG
-
-/* If WIFSTOPPED(STATUS), the signal that stopped the child. */
-#define __WSTOPSIG(status) __WEXITSTATUS(status)
-#define WSTOPSIG __WSTOPSIG
-
-/* Nonzero if STATUS indicates normal termination. */
-#define WIFEXITED(status) (__WTERMSIG(status) == 0)
-
-/* Nonzero if STATUS indicates termination by a signal. */
-#define WIFSIGNALED(status) (!WIFSTOPPED(status) && !WIFEXITED(status))
-
-/* Nonzero if STATUS indicates the child is stopped. */
-#define WIFSTOPPED(status) (((status) & 0xff) == 0x7f)
-
-
-pid_t wait(int *status) __THROW;
-pid_t waitpid(pid_t pid, int *status, int options) __THROW;
-
-pid_t wait3(int *status, int options, struct rusage *rusage) __THROW;
-
-pid_t wait4(pid_t pid, int *status, int options, struct rusage *rusage) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/syslog.h b/mdk-stage1/dietlibc/include/syslog.h
deleted file mode 100644
index 830b4928a..000000000
--- a/mdk-stage1/dietlibc/include/syslog.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <sys/syslog.h>
diff --git a/mdk-stage1/dietlibc/include/termios.h b/mdk-stage1/dietlibc/include/termios.h
deleted file mode 100644
index f10909c1b..000000000
--- a/mdk-stage1/dietlibc/include/termios.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _TERMIOS_H
-#define _TERMIOS_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-/* man, the Linux kernel headers suck */
-#define __USE_BSD
-#include <linux/termios.h>
-#undef __USE_BSD
-
-pid_t tcgetpgrp(int fd) __THROW;
-int tcsetpgrp(int fd, pid_t pgrpid) __THROW;
-int tcgetattr(int fd, struct termios *termios_p) __THROW;
-int tcsetattr(int fd, int optional_actions, struct termios *termios_p) __THROW;
-speed_t cfgetospeed(struct termios *termios_p) __THROW;
-int cfsetospeed(struct termios *termios_p, speed_t speed) __THROW;
-speed_t cfgetispeed(struct termios *termios_p) __THROW;
-int cfsetispeed(struct termios *termios_p, speed_t speed) __THROW;
-int tcflush(int fd, int queue_selector) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/time.h b/mdk-stage1/dietlibc/include/time.h
deleted file mode 100644
index 827c85b97..000000000
--- a/mdk-stage1/dietlibc/include/time.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _TIME_H
-#define _TIME_H
-
-#include <sys/cdefs.h>
-#include <sys/time.h>
-
-extern int __isleap(int year);
-
-int nanosleep(const struct timespec *req, struct timespec *rem) __THROW;
-unsigned int sleep(unsigned int secs) __THROW;
-
-time_t mktime(struct tm *timeptr) __THROW __pure__;
-
-char *asctime(const struct tm *timeptr) __THROW;
-char *asctime_r(const struct tm *timeptr, char *buf) __THROW;
-
-char *ctime(const time_t *timep) __THROW;
-
-size_t strftime(char *s, size_t max, const char *format, const struct tm *tm) __THROW;
-time_t time(time_t *t) __THROW;
-
-int stime(time_t *t) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/unistd.h b/mdk-stage1/dietlibc/include/unistd.h
deleted file mode 100644
index 1a528c0e4..000000000
--- a/mdk-stage1/dietlibc/include/unistd.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef _UNISTD_H
-#define _UNISTD_H
-
-#include <sys/cdefs.h>
-#include <dirent.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <getopt.h>
-#include <linux/sysctl.h>
-#include <sys/stat.h>
-
-/* Values for the second argument to access.
- These may be OR'd together. */
-#define R_OK 4 /* Test for read permission. */
-#define W_OK 2 /* Test for write permission. */
-#define X_OK 1 /* Test for execute permission. */
-#define F_OK 0 /* Test for existence. */
-
-/* Test for access to NAME using the real UID and real GID. */
-extern int access (__const char *__name, int __type) __THROW;
-
-#define SEEK_SET 0
-#define SEEK_CUR 1
-#define SEEK_END 2
-
-#define STDIN_FILENO 0
-#define STDOUT_FILENO 1
-#define STDERR_FILENO 2
-
-off_t lseek(int fildes, off_t offset, int whence) __THROW;
-int llseek(int fildes, unsigned long hi, unsigned long lo, loff_t* result,int whence) __THROW;
-#ifndef __NO_STAT64
-loff_t lseek64(int fildes, loff_t offset, int whence) __THROW;
-#endif
-#if _FILE_OFFSET_BITS == 64
-#define lseek(fildes,offset,whence) lseek64(fildes,offset,whence)
-#endif
-
-int chdir(const char *path) __THROW;
-int fchdir(int fd) __THROW;
-int mkdir(const char *pathname, mode_t mode) __THROW;
-int rmdir(const char *pathname) __THROW;
-char *getcwd(char *buf, size_t size) __THROW;
-
-int open(const char* pathname,int flags, ...) __THROW;
-int open64(const char* pathname,int flags, ...) __THROW;
-int creat(const char* pathname,mode_t mode) __THROW;
-int creat64(const char* pathname,mode_t mode) __THROW;
-int write(int fd,const void* buf,size_t len) __THROW;
-int read(int fd,void* buf,size_t len) __THROW;
-int close(int fd) __THROW;
-
-int unlink(const char *pathname) __THROW;
-
-int pread(int fd, void *buf, size_t count, off_t offset);
-int pwrite(int fd, const void *buf, size_t count, off_t offset);
-
-int execve(const char *filename, char *const argv [], char *const envp[]) __THROW;
-int execlp(const char *file, const char *arg, ...) __THROW;
-int execv(const char *path, char *const argv[]) __THROW;
-int execvp(const char *file, char *const argv[]) __THROW;
-int execl(const char *path, ...) __THROW;
-
-pid_t getpid(void) __attribute__((__const__)) __THROW;
-pid_t getppid(void) __THROW;
-int kill(pid_t pid, int sig) __THROW;
-
-int setpgid (pid_t pid,pid_t pgid) __THROW;
-pid_t getpgid (pid_t pid) __THROW;
-int setpgrp (void) __THROW;
-pid_t getpgrp (void) __THROW;
-pid_t setsid (void) __THROW;
-int dup (int oldfd) __THROW;
-int dup2 (int oldfd,int newfd) __THROW;
-
-int mknod(const char *pathname, mode_t mode, dev_t dev) __THROW;
-
-int getdents(unsigned int fd, struct dirent *dirp, unsigned int count) __THROW;
-int getdents64(unsigned int fd, struct dirent64 *dirp, unsigned int count) __THROW;
-
-pid_t fork(void) __THROW;
-pid_t vfork(void) __THROW;
-
-int readlink(const char *path, char *buf, size_t bufsiz) __THROW;
-int symlink(const char *oldpath, const char *newpath) __THROW;
-int link(const char *oldpath, const char *newpath) __THROW;
-
-int chown(const char *path, uid_t owner, gid_t group) __THROW;
-int fchown(int fd, uid_t owner, gid_t group) __THROW;
-int lchown(const char *path, uid_t owner, gid_t group) __THROW;
-
-int fsync(int fd) __THROW;
-
-int pipe(int filedes[2]) __THROW;
-
-char *ttyname (int desc) __THROW;
-
-int brk(void *end_data_segment) __THROW;
-void *sbrk(ptrdiff_t increment) __THROW;
-
-int gethostname(char *name, size_t len) __THROW;
-int sethostname(const char *name, size_t len) __THROW;
-
-void usleep(unsigned long usec) __THROW;
-unsigned int sleep(unsigned int seconds) __THROW;
-
-unsigned int alarm(unsigned int seconds) __THROW;
-int sync(void) __THROW;
-
-int isatty(int desc) __THROW;
-
-void _exit(int status) __THROW __attribute__((noreturn));
-
-extern int daemon (int nochdir,int noclose) __THROW;
-
-#if _FILE_OFFSET_BITS == 64
-#define open open64
-#define creat creat64
-#endif
-
-extern char* getlogin(void) __THROW;
-/* warning: the diet libc getlogin() simply returns getenv("LOGNAME") */
-
-int chroot(const char *path) __THROW;
-
-uid_t getuid(void) __THROW;
-uid_t geteuid(void) __THROW;
-gid_t getgid(void) __THROW;
-gid_t getegid(void) __THROW;
-int setuid(uid_t uid) __THROW;
-/* int seteuid(uid_t uid) __THROW; */
-int setgid(gid_t gid) __THROW;
-/* int setegid(gid_t gid) __THROW; */
-int setregid(gid_t rgid, gid_t egid) __THROW;
-int setreuid(uid_t ruid, uid_t euid) __THROW;
-#define seteuid(euid) setreuid(-1,euid)
-#define setegid(egid) setregid(-1,egid)
-
-int rename(const char *oldpath, const char *newpath) __THROW;
-int ftruncate(int fd, off_t length) __THROW;
-
-int mkstemp(char *Template) __THROW;
-
-int select(int n, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *timeout) __THROW;
-
-int nice(int inc) __THROW;
-
-extern char *__environ[];
-
-char *crypt(const char *key, const char *salt) __THROW;
-void encrypt(char block[64], int edflag) __THROW;
-void setkey(const char *key) __THROW;
-
-size_t getpagesize(void) __attribute__((__const__)) __THROW;
-
-int getdomainname(char *name, size_t len) __THROW;
-int setdomainname(const char *name, size_t len) __THROW;
-
-int getgroups(int size, gid_t list[]) __THROW;
-
-/* warning: linux specific: */
-int _sysctl(struct __sysctl_args *args) __THROW;
-int sendfile(int out_fd, int in_fd, off_t *offset, size_t count) __THROW;
-
-int getdtablesize(void) __THROW;
-char *getpass(const char * prompt) __THROW;
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/utime.h b/mdk-stage1/dietlibc/include/utime.h
deleted file mode 100644
index 41674f379..000000000
--- a/mdk-stage1/dietlibc/include/utime.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _UTIME_H
-#define _UTIME_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <time.h>
-
-struct utimbuf {
- time_t actime; /* access time */
- time_t modtime; /* modification time */
-};
-
-int utime(const char *filename, struct utimbuf *buf) __THROW;
-
-
-#endif
diff --git a/mdk-stage1/dietlibc/include/utmp.h b/mdk-stage1/dietlibc/include/utmp.h
deleted file mode 100644
index 2946be921..000000000
--- a/mdk-stage1/dietlibc/include/utmp.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _UTMP_H
-#define _UTMP_H
-
-#include <sys/cdefs.h>
-#include <sys/types.h>
-#include <time.h>
-
-#define UT_LINESIZE 32
-#define UT_NAMESIZE 32
-#define UT_HOSTSIZE 256
-
-#define _PATH_UTMP "/var/run/utmp"
-#define _PATH_WTMP "/var/log/wtmp"
-
-/* The structure describing an entry in the database of
- previous logins. */
-struct lastlog
- {
- time_t ll_time;
- char ll_line[UT_LINESIZE];
- char ll_host[UT_HOSTSIZE];
- };
-
-/* The structure describing the status of a terminated process. This
- type is used in `struct utmp' below. */
-struct exit_status
- {
- short int e_termination; /* Process termination status. */
- short int e_exit; /* Process exit status. */
- };
-
-/* The structure describing an entry in the user accounting database. */
-struct utmp
-{
- short int ut_type; /* Type of login. */
- pid_t ut_pid; /* Process ID of login process. */
- char ut_line[UT_LINESIZE]; /* Devicename. */
- char ut_id[4]; /* Inittab ID. */
- char ut_user[UT_NAMESIZE]; /* Username. */
- char ut_host[UT_HOSTSIZE]; /* Hostname for remote login. */
-#define ut_name ut_host
- struct exit_status ut_exit; /* Exit status of a process marked
- as DEAD_PROCESS. */
- long int ut_session; /* Session ID, used for windowing. */
- struct timeval ut_tv; /* Time entry was made. */
- int32_t ut_addr_v6[4]; /* Internet address of remote host. */
- char __unused[20]; /* Reserved for future use. */
-};
-
-/* Values for the `ut_type' field of a `struct utmp'. */
-#define EMPTY 0 /* No valid user accounting information. */
-
-#define RUN_LVL 1 /* The system's runlevel. */
-#define BOOT_TIME 2 /* Time of system boot. */
-#define NEW_TIME 3 /* Time after system clock changed. */
-#define OLD_TIME 4 /* Time when system clock changed. */
-
-#define INIT_PROCESS 5 /* Process spawned by the init process. */
-#define LOGIN_PROCESS 6 /* Session leader of a logged in user. */
-#define USER_PROCESS 7 /* Normal process. */
-#define DEAD_PROCESS 8 /* Terminated process. */
-
-#define ACCOUNTING 9
-
-/* Tell the user that we have a modern system with UT_HOST, UT_PID,
- UT_TYPE, UT_ID and UT_TV fields. */
-#define _HAVE_UT_TYPE 1
-#define _HAVE_UT_PID 1
-#define _HAVE_UT_ID 1
-#define _HAVE_UT_TV 1
-#define _HAVE_UT_HOST 1
-
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__dtostr.c b/mdk-stage1/dietlibc/lib/__dtostr.c
deleted file mode 100644
index e9a8a83d3..000000000
--- a/mdk-stage1/dietlibc/lib/__dtostr.c
+++ /dev/null
@@ -1,104 +0,0 @@
-#include <stdio.h>
-/* convert double to string. Helper for sprintf. */
-
-int __dtostr(double d,char *buf,int maxlen,int prec) {
- unsigned long long *x=(unsigned long long *)&d;
- /* step 1: extract sign, mantissa and exponent */
- signed int s=*x>>63;
- signed long e=((*x>>52)&((1<<11)-1))-1023;
-/* unsigned long long m=*x & ((1ull<<52)-1); */
- /* step 2: exponent is base 2, compute exponent for base 10 */
- signed long e10=1+(long)(e*0.30102999566398119802); /* log10(2) */
- /* step 3: calculate 10^e10 */
- int i;
- double tmp=10.0;
- char *oldbuf=buf;
- int initial=1;
-
- if (d==0.0) {
- *buf='0'; ++buf;
- goto done;
- }
- if (s) { d=-d; *buf='-'; --maxlen; buf++; }
-/* printf("e=%d e10=%d prec=%d\n",e,e10,prec); */
- if (e10>=0) {
- i=e10;
- while (i>10) { tmp=tmp*1e10; i-=10; }
- while (i>1) { tmp=tmp*10; --i; }
- } else {
- i=(e10=-e10);
- while (i>10) { tmp=tmp*1e-10; i-=10; }
- while (i>1) { tmp=tmp/10; --i; }
- }
- while (d/tmp<1) {
- --e10;
- tmp/=10.0;
- }
- /* step 4: see if precision is sufficient to display all digits */
- if (e10>prec) {
- /* use scientific notation */
- int len=__dtostr(d/tmp,buf,maxlen,prec);
- if (len==0) return 0;
- maxlen-=len; buf+=len;
- if (--maxlen>=0) {
- *buf='e';
- ++buf;
- }
- for (len=1000; len>0; len/=10) {
- if (e10>=len || !initial) {
- if (--maxlen>=0) {
- *buf=(e10/len)+'0';
- ++buf;
- }
- initial=0;
- e10=e10%len;
- }
- }
- if (maxlen>=0) return buf-oldbuf;
- return 0;
- }
- /* step 5: loop through the digits, inserting the decimal point when
- * appropriate */
- if (d<1.0) {
- double x=1.0;
- int first=1;
- do {
- if (--maxlen<0) return buf-oldbuf;
- *buf='0'; ++buf;
- if (first) {
- first=0;
- *buf='.'; ++buf;
- if (--maxlen<0) return buf-oldbuf;
- }
- x/=10.0;
- } while (x>d);
- }
- for (; prec>0; ) {
- double tmp2=d/tmp;
- char c;
- d-=((int)tmp2*tmp);
- c=((int)tmp2);
- if ((!initial)||c) {
- if (--maxlen>=0) {
- initial=0;
- *buf=c+'0';
- ++buf;
- } else
- return 0;
- --prec;
- }
- if (tmp>0.5 && tmp<1.5) {
- tmp=1e-1;
- initial=0;
- if (--maxlen>=0) {
- *buf='.';
- ++buf;
- } else
- return 0;
- } else
- tmp/=10.0;
- }
-done:
- *buf=0;
- return buf-oldbuf;
-}
diff --git a/mdk-stage1/dietlibc/lib/__fstat64.c b/mdk-stage1/dietlibc/lib/__fstat64.c
deleted file mode 100644
index 6f9fcb2c5..000000000
--- a/mdk-stage1/dietlibc/lib/__fstat64.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-#include <errno.h>
-
-extern int __dietlibc_fstat64(int __fd, struct stat64 *__buf);
-extern void __stat64_cvt(const struct stat *src,struct stat64 *dest);
-
-int fstat64(int __fd, struct stat64 *__buf) {
- if (__dietlibc_fstat64(__fd,__buf)) {
- struct stat temp;
-#ifdef WANT_THREAD_SAFE
- if (*__errno_location()!=ENOSYS) return -1;
-#else
- if (errno!=ENOSYS) return -1;
-#endif
- if (fstat(__fd,&temp)) return -1;
- __stat64_cvt(&temp,__buf);
- }
- return 0;
-}
-#endif
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__getcwd.c b/mdk-stage1/dietlibc/lib/__getcwd.c
deleted file mode 100644
index e97fc4520..000000000
--- a/mdk-stage1/dietlibc/lib/__getcwd.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <stdlib.h>
-
-extern int __syscall_getcwd(char* buf, size_t size);
-
-char *getcwd(char *buf, size_t size) {
- int tmp;
- if ((tmp=__syscall_getcwd(buf,size))<0) return 0;
- buf[tmp]=0;
- return buf;
-}
diff --git a/mdk-stage1/dietlibc/lib/__isnan.c b/mdk-stage1/dietlibc/lib/__isnan.c
deleted file mode 100644
index 9d21e9824..000000000
--- a/mdk-stage1/dietlibc/lib/__isnan.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <stdio.h>
-
-int __isnan(double d) {
- unsigned long long *x=(unsigned long long *)&d;
- return (*x==0x7FF8002000000000ll || *x==0x7FF0002000000000);
-}
-
-#if 0
-TestFromIeeeExtended("7FFF0000000000000000"); /* +infinity */
-TestFromIeeeExtended("FFFF0000000000000000"); /* -infinity */
-TestFromIeeeExtended("7FFF8001000000000000"); /* Quiet NaN(1) */
-TestFromIeeeExtended("7FFF0001000000000000"); /* Signalling NaN(1) */
-TestFromIeeeExtended("3FFFFEDCBA9876543210"); /* accuracy test */
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__lltostr.c b/mdk-stage1/dietlibc/lib/__lltostr.c
deleted file mode 100644
index eb4a27cef..000000000
--- a/mdk-stage1/dietlibc/lib/__lltostr.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <string.h>
-
-int __lltostr(char *s, int size, unsigned long long i, int base, char UpCase)
-{
- char *tmp;
- int j=0;
-
- s[--size]=0;
-
- tmp=s+size;
-
- if ((base==0)||(base>36)) base=10;
-
- j=0;
- if (!i)
- {
- *(--tmp)='0';
- j=1;
- }
-
- while((tmp>s)&&(i))
- {
- tmp--;
- if ((*tmp=i%base+'0')>'9') *tmp+=(UpCase?'A':'a')-'9'-1;
- i=i/base;
- j++;
- }
- memmove(s,tmp,j+1);
-
- return j;
-}
diff --git a/mdk-stage1/dietlibc/lib/__lstat64.c b/mdk-stage1/dietlibc/lib/__lstat64.c
deleted file mode 100644
index a871f3917..000000000
--- a/mdk-stage1/dietlibc/lib/__lstat64.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-#include <errno.h>
-
-extern int __dietlibc_lstat64(const char *__file, struct stat64 *__buf);
-extern void __stat64_cvt(const struct stat *src,struct stat64 *dest);
-
-int lstat64(const char *__file, struct stat64 *__buf) {
- if (__dietlibc_lstat64(__file,__buf)) {
- struct stat temp;
-#ifdef WANT_THREAD_SAFE
- if (*__errno_location()!=ENOSYS) return -1;
-#else
- if (errno!=ENOSYS) return -1;
-#endif
- if (lstat(__file,&temp)) return -1;
- __stat64_cvt(&temp,__buf);
- }
- return 0;
-}
-#endif
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__ltostr.c b/mdk-stage1/dietlibc/lib/__ltostr.c
deleted file mode 100644
index 57e0690d2..000000000
--- a/mdk-stage1/dietlibc/lib/__ltostr.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <string.h>
-
-int __ltostr(char *s, int size, unsigned long i, int base, char UpCase)
-{
- char *tmp;
- int j=0;
-
- s[--size]=0;
-
- tmp=s+size;
-
- if ((base==0)||(base>36)) base=10;
-
- j=0;
- if (!i)
- {
- *(--tmp)='0';
- j=1;
- }
-
- while((tmp>s)&&(i))
- {
- tmp--;
- if ((*tmp=i%base+'0')>'9') *tmp+=(UpCase?'A':'a')-'9'-1;
- i=i/base;
- j++;
- }
- memmove(s,tmp,j+1);
-
- return j;
-}
diff --git a/mdk-stage1/dietlibc/lib/__stat64.c b/mdk-stage1/dietlibc/lib/__stat64.c
deleted file mode 100644
index dfb0d4315..000000000
--- a/mdk-stage1/dietlibc/lib/__stat64.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-#include <errno.h>
-
-extern int __dietlibc_stat64(const char *__file, struct stat64 *__buf);
-extern void __stat64_cvt(const struct stat *src,struct stat64 *dest);
-
-int stat64(const char *__file, struct stat64 *__buf) {
- if (__dietlibc_stat64(__file,__buf)) {
- struct stat temp;
-#ifdef WANT_THREAD_SAFE
- if (*__errno_location()!=ENOSYS) return -1;
-#else
- if (errno!=ENOSYS) return -1;
-#endif
- if (stat(__file,&temp)) return -1;
- __stat64_cvt(&temp,__buf);
- }
- return 0;
-}
-#endif
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__stat64_cvt.c b/mdk-stage1/dietlibc/lib/__stat64_cvt.c
deleted file mode 100644
index dced352a4..000000000
--- a/mdk-stage1/dietlibc/lib/__stat64_cvt.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-
-void __stat64_cvt(const struct stat *src,struct stat64 *dest) {
- dest->st_dev=src->st_dev;
- dest->st_ino=src->st_ino;
- dest->st_mode=src->st_mode;
- dest->st_nlink=src->st_nlink;
- dest->st_uid=src->st_gid;
- dest->st_rdev=src->st_rdev;
- dest->st_size=src->st_size;
- dest->st_blksize=src->st_blksize;
- dest->st_blocks=src->st_blocks;
- dest->st_atime=src->st_atime;
- dest->st_mtime=src->st_mtime;
- dest->st_ctime=src->st_ctime;
-}
-#endif
diff --git a/mdk-stage1/dietlibc/lib/__xmknod.c b/mdk-stage1/dietlibc/lib/__xmknod.c
deleted file mode 100644
index 4739a1f5f..000000000
--- a/mdk-stage1/dietlibc/lib/__xmknod.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <sys/stat.h>
-
-int __xmknod(int ver,char* filename,mode_t mode,dev_t *dev) {
- return mknod(filename,mode,*dev);
-}
-
diff --git a/mdk-stage1/dietlibc/lib/_brk.c b/mdk-stage1/dietlibc/lib/_brk.c
deleted file mode 100644
index 6d0b29c03..000000000
--- a/mdk-stage1/dietlibc/lib/_brk.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <unistd.h>
-
-extern int __diet_brk(void *end_data_segment);
-
-void* __curbrk=0;
-
-int __brk(void *end_data_segment) {
- int res;
- if ((res=__diet_brk(end_data_segment))==0)
- __curbrk=end_data_segment;
- return res;
-}
-
-int brk (void *end_data_segment) __attribute__((weak,alias("__brk")));
diff --git a/mdk-stage1/dietlibc/lib/abort.c b/mdk-stage1/dietlibc/lib/abort.c
deleted file mode 100644
index 55bfb8f0f..000000000
--- a/mdk-stage1/dietlibc/lib/abort.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/types.h>
-#include <linux/signal.h>
-#include <signal.h>
-#include <stdlib.h>
-
-void abort() {
- sigset_t t;
- if (!sigemptyset(&t) && !sigaddset(&t, SIGABRT))
- sigprocmask(SIG_UNBLOCK, &t, 0);
- while (1)
- if (raise(SIGABRT))
- exit(127);
-}
diff --git a/mdk-stage1/dietlibc/lib/abs.c b/mdk-stage1/dietlibc/lib/abs.c
deleted file mode 100644
index 9d7055358..000000000
--- a/mdk-stage1/dietlibc/lib/abs.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <stdlib.h>
-
-int abs(int j)
-{
- return (j < 0) ? -j : j;
-}
diff --git a/mdk-stage1/dietlibc/lib/accept.c b/mdk-stage1/dietlibc/lib/accept.c
deleted file mode 100644
index c7e8254ca..000000000
--- a/mdk-stage1/dietlibc/lib/accept.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_accept(int a, void * addr, void * addr2) {
-#ifdef __i386__
- return socketcall(SYS_ACCEPT, (long*)&a);
-#else
- unsigned long args[] = { a, (long) addr, (long) addr2 };
- return socketcall(SYS_ACCEPT, args);
-#endif
-}
-
-int accept(int a, void * addr, void * addr2) __attribute__((weak,alias("__libc_accept")));
diff --git a/mdk-stage1/dietlibc/lib/alarm.c b/mdk-stage1/dietlibc/lib/alarm.c
deleted file mode 100644
index fd35372f2..000000000
--- a/mdk-stage1/dietlibc/lib/alarm.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (C) 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-#include <unistd.h>
-#include <sys/time.h>
-
-/* Schedule an alarm. In SECONDS seconds, the process will get a SIGALRM.
- If SECONDS is zero, any currently scheduled alarm will be cancelled.
- The function returns the number of seconds remaining until the last
- alarm scheduled would have signaled, or zero if there wasn't one.
- There is no return value to indicate an error, but you can set `errno'
- to 0 and check its value after calling `alarm', and this might tell you.
- The signal may come late due to processor scheduling. */
-unsigned int
-alarm (seconds)
- unsigned int seconds;
-{
- struct itimerval old, new;
- unsigned int retval;
-
- new.it_interval.tv_usec = 0;
- new.it_interval.tv_sec = 0;
- new.it_value.tv_usec = 0;
- new.it_value.tv_sec = (long int) seconds;
- if (setitimer (ITIMER_REAL, &new, &old) < 0)
- return 0;
-
- retval = old.it_value.tv_sec;
- if (old.it_value.tv_usec)
- ++retval;
- return retval;
-}
diff --git a/mdk-stage1/dietlibc/lib/alloc.c b/mdk-stage1/dietlibc/lib/alloc.c
deleted file mode 100644
index 8cb87a69b..000000000
--- a/mdk-stage1/dietlibc/lib/alloc.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * malloc/free by O.Dreesen
- */
-
-#include <linux/unistd.h>
-#include <asm/mman.h>
-#include <linux/errno.h>
-#include "dietfeatures.h"
-
-#if 0
-#include <sys/mman.h>
-#define _LIBC
-#include <errno.h>
-#endif
-
-#include <linux/types.h>
-
-#if defined(MAP_ANONYMOUS) && !defined(MAP_ANON)
-#define MAP_ANON MAP_ANONYMOUS
-#endif
-
-#ifndef MAP_FAILED
-#define MAP_FAILED ((void*)-1)
-#endif
-
-#ifndef NULL
-#define NULL ((void*)0)
-#endif
-
-extern void * mmap(void *start, size_t length, int prot , int flags, int fd, off_t offset);
-extern void *memset(void *s, int c, size_t n);
-extern void *memcpy(void *dest, const void *src, size_t n);
-
-typedef struct t_alloc_head {
- unsigned int magic1;
- struct t_alloc_head *ptr;
- unsigned long size;
- unsigned int magic2;
-} alloc_head;
-
-/* guess what ? the virtual block size */
-#define MEM_BLOCK_SIZE 4096
-
-/* minimum allocated bytes */
-#define MEM_ALLOC_MIN 4
-
-/* Initial start position in memory */
-#define MEM_ALLOC_START ((char*)0x18000000)
-
-/* Make every block align */
-#define MEM_ALIGN(s) (((s)+MEM_ALLOC_MIN-1)&(~(MEM_ALLOC_MIN-1)))
-#define PAGE_ALIGN(s) (((s)+MEM_BLOCK_SIZE-1)&(~(MEM_BLOCK_SIZE-1)))
-#define PAGE_ALIGNP(p) ((char*)PAGE_ALIGN((size_t)(p)))
-
-#define END_OF_BLOCK(p) ((alloc_head*)(((char*)(p))+((p)->size)))
-#define START_BLOCK(p) ((alloc_head*)(((char*)(p))-sizeof(alloc_head)))
-#define START_DATA(p) (((char*)(p))+sizeof(alloc_head))
-#define MIN_ALLOC(s) (((((s)+sizeof(alloc_head)-1)/MEM_ALLOC_MIN)+1)*MEM_ALLOC_MIN)
-
-#define ALLOC_MAGIC1 0xbad2f7ee
-#define ALLOC_MAGIC2 0xf7ee2bad
-
-/* freelist handler */
-static alloc_head base = {ALLOC_MAGIC1,&base,0,ALLOC_MAGIC2};
-static char *alloc_get_end = MEM_ALLOC_START;
-
-void __libc_free(void *ptr)
-{
- alloc_head *prev,*p,*block;
-
- if (ptr==NULL) return;
-
- block=START_BLOCK(ptr);
- if (block->magic1 != ALLOC_MAGIC1) return;
- if (block->magic2 != ALLOC_MAGIC2) return;
-
- prev=&base;
- for (p=prev->ptr ; ; prev=p, p=p->ptr)
- {
- if ((block>prev)&&(block<p)) break; /* found the gap block belongs */
- if ((prev>p)&&(block<p)) break; /* block pre freelist */
- if ((prev>p)&&(block>prev)) break; /* block after freelist */
-
- /* emergency escape: freelist has ONLY one entry the freelist base */
- if (p->ptr==p) break;
- }
- prev->ptr = block;
-
- if (END_OF_BLOCK(block)==p)
- { /* join right neighbor */
- block->ptr = p->ptr;
- block->size += p->size;
- }
- else
- block->ptr = p;
-
- if (END_OF_BLOCK(prev)==block)
- { /* join left neighbor */
- prev->size += block->size;
- prev->ptr = block->ptr;
- }
-}
-void free(void *ptr) __attribute__((weak,alias("__libc_free")));
-
-static void *alloc_get_mem(unsigned long size)
-{
- char *tmp;
- alloc_head *ah;
-
- size=PAGE_ALIGN(size);
-
- /* map free pages @ alloc_get_end */
- tmp=mmap(alloc_get_end, size, PROT_READ|PROT_WRITE,
- MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
- if (tmp==MAP_FAILED)
- {
- /* OK we can't map free pages @ alloc_get_end so try free position */
- tmp=mmap(0, size, PROT_READ|PROT_WRITE,
- MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
- if (tmp==MAP_FAILED)
- {
- errno = ENOMEM;
- return NULL; /* PANIC ! */
- }
- alloc_get_end=tmp;
- }
-
- alloc_get_end+=size;
-
- /* make a header */
- ah=(alloc_head*)tmp;
- ah->magic1=ALLOC_MAGIC1;
- ah->magic2=ALLOC_MAGIC2;
- ah->ptr=ah;
- ah->size=size;
-
- /* link new free maped pages in freelist */
- __libc_free(START_DATA(tmp));
-
- return &base;
-}
-
-void *__libc_malloc(size_t size)
-{
- alloc_head *p, *prev;
- size_t need;
-
- /* needed MEM_ALLOC_MIN */
- need=MIN_ALLOC(size);
-
- prev=&base;
- for (p=prev->ptr;;prev=p,p=p->ptr)
- {
- if (p->size>=need)
- {
- if (p->size==need)
- { /* fit PERFECT */
- prev->ptr=p->ptr; /* relink freelist */
- }
- else
- {
- alloc_head *tmp=(alloc_head*)(((char*)p)+need);
- if ((p->size-need)<sizeof(alloc_head))
- { /* work around: if there is not enough space for freelist head.
- * this waste some bytes ( < sizeof(alloc_head) ) */
- need=p->size;
- prev->ptr=p->ptr; /* relink freelist */
- }
- else
- {
- prev->ptr=tmp;
- tmp->magic1=ALLOC_MAGIC1;
- tmp->magic2=ALLOC_MAGIC2;
- tmp->ptr=p->ptr;
- tmp->size=p->size-need; /* remaining size */
- }
-
- p->size=need; /* set size */
- }
- p->ptr=p; /* self-link */
-
- return (void*)START_DATA(p);
- }
- else if (p==&base)
- {
- if ((p=alloc_get_mem(need))==NULL) goto err_out;
- }
- }
-err_out:
- return NULL;
-}
-void *malloc(size_t size) __attribute__((weak,alias("__libc_malloc")));
-
-void *calloc(size_t nmemb,size_t size)
-{
- size_t n=nmemb*size;
- void *tmp=malloc(n);
- if (tmp) memset(tmp,0,n);
- return tmp;
-}
-
-void *realloc(void *ptr,size_t size)
-{
- alloc_head *tmp=0,*tf=0;
- long need=0;
- long diff=0;
-
- if (ptr)
- {
- if (size)
- {
- tmp=START_BLOCK(ptr);
- need=MIN_ALLOC(size); /* only this size will survive */
- diff=tmp->size-need;
- if (diff<0)
- {
- if ((tf=malloc(size)))
- {
- memcpy(tf,ptr,tmp->size-sizeof(alloc_head));
- free(ptr);
- return tf;
- }
- return NULL;
- }
- if (diff>=sizeof(alloc_head))
- {
- tmp->size=need;
- tf=END_OF_BLOCK(tmp);
- tf->magic1=ALLOC_MAGIC1;
- tf->magic2=ALLOC_MAGIC2;
- tf->ptr=tf;
- tf->size=diff;
- free(START_DATA(tf));
- }
- return ptr;
- }
- else
- free(ptr);
- }
- else if (size>0)
- return malloc(size);
- return NULL;
-}
diff --git a/mdk-stage1/dietlibc/lib/assert_fail.c b/mdk-stage1/dietlibc/lib/assert_fail.c
deleted file mode 100644
index 3d6ba65c1..000000000
--- a/mdk-stage1/dietlibc/lib/assert_fail.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include "dietwarning.h"
-
-extern int __ltostr(char *s, int size, unsigned long i, int base, char UpCase);
-
-void __assert_fail (const char *assertion, const char *file, unsigned int line, const char *function)
-{
- int alen=strlen(assertion);
- int flen=strlen(file);
- int fulen=strlen(function);
- char *buf=(char*)alloca(alen+flen+fulen+50);
- if (buf) {
- char *tmp;
- *buf=0;
- if (file) strcat(strcat(buf,file),":");
- tmp=buf+strlen(buf);
- __ltostr(tmp,10,line,10,0);
- strcat(buf,": ");
- if (function) strcat(strcat(buf,function),": ");
- strcat(buf,"Assertion `");
- strcat(buf,assertion);
- strcat(buf,"' failed.\n");
- write(2,buf,strlen(buf));
- }
- abort();
-}
-
-link_warning("__assert_fail","warning: your code still has assertions enabled!")
diff --git a/mdk-stage1/dietlibc/lib/atexit.c b/mdk-stage1/dietlibc/lib/atexit.c
deleted file mode 100644
index 8204af06c..000000000
--- a/mdk-stage1/dietlibc/lib/atexit.c
+++ /dev/null
@@ -1,23 +0,0 @@
-typedef void (*function)(void);
-
-static function __atexitlist[4];
-
-int atexit(function t) {
- int i;
- for (i=0; i<4; i++)
- if (__atexitlist[i]==0) {
- __atexitlist[i]=t;
- return 0;
- }
- return -1;
-}
-
-extern void _exit(int code) __attribute__((noreturn));
-
-void exit(int code) {
- if (__atexitlist[3]) __atexitlist[3]();
- if (__atexitlist[2]) __atexitlist[2]();
- if (__atexitlist[1]) __atexitlist[1]();
- if (__atexitlist[0]) __atexitlist[0]();
- _exit(code);
-}
diff --git a/mdk-stage1/dietlibc/lib/atof.c b/mdk-stage1/dietlibc/lib/atof.c
deleted file mode 100644
index 54221390e..000000000
--- a/mdk-stage1/dietlibc/lib/atof.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <stdlib.h>
-
-double atof(const char *nptr) {
-#if 0
- return strtod(nptr,0);
-#else
- double tmp=strtod(nptr,0);
- return tmp;
-#endif
-}
diff --git a/mdk-stage1/dietlibc/lib/atoi.c b/mdk-stage1/dietlibc/lib/atoi.c
deleted file mode 100644
index fe952b8c4..000000000
--- a/mdk-stage1/dietlibc/lib/atoi.c
+++ /dev/null
@@ -1,8 +0,0 @@
-int atoi(const char* s) {
- int v=0;
- int sign=1;
- if (*s=='-') { sign=-1; ++s; } else if (*s=='+') ++s;
- while (*s && (*s>='0') && (*s<='9'))
- v=v*10+*s++-'0';
- return v*sign;
-}
diff --git a/mdk-stage1/dietlibc/lib/atol.c b/mdk-stage1/dietlibc/lib/atol.c
deleted file mode 100644
index 558a004b9..000000000
--- a/mdk-stage1/dietlibc/lib/atol.c
+++ /dev/null
@@ -1,8 +0,0 @@
-long int atol(const char* s) {
- long int v=0;
- int sign=1;
- if (*s=='-') { sign=-1; ++s; } else if (*s=='+') ++s;
- while (*s && (*s>='0') && (*s<='9'))
- v=v*10+*s++-'0';
- return v*sign;
-}
diff --git a/mdk-stage1/dietlibc/lib/bind.c b/mdk-stage1/dietlibc/lib/bind.c
deleted file mode 100644
index ec1c93e1b..000000000
--- a/mdk-stage1/dietlibc/lib/bind.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int bind(int a, void * b, int c) {
-#ifdef __i386__
- return socketcall(SYS_BIND, (long*)&a);
-#else
- unsigned long args[] = { a, (long) b, c };
- return socketcall(SYS_BIND, args);
-#endif
-}
diff --git a/mdk-stage1/dietlibc/lib/bsearch.c b/mdk-stage1/dietlibc/lib/bsearch.c
deleted file mode 100644
index d2f5c74b2..000000000
--- a/mdk-stage1/dietlibc/lib/bsearch.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <stdlib.h>
-
-void *bsearch(const void *key, const void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) {
- const char *v, *r;
- int res;
- r=base+(nmemb-1)*size;
- do {
- register int num=nmemb/2;
- v=base+num*size;
- if ((res=compar(key,v))<0) {
- r=v-size;
- nmemb=num;
- } else {
- if (res==0) return (void*)v;
- base=v+size;
- nmemb-=num;
- }
- } while ((char*)base<=r);
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/cfmakeraw.c b/mdk-stage1/dietlibc/lib/cfmakeraw.c
deleted file mode 100644
index 7f6df9913..000000000
--- a/mdk-stage1/dietlibc/lib/cfmakeraw.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <termios.h>
-#include <sys/ioctl.h>
-
-void cfmakeraw(struct termios *t)
-{
- t->c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON);
- t->c_oflag &= ~OPOST;
- t->c_lflag &= ~(ECHO|ECHONL|ICANON|ISIG|IEXTEN);
- t->c_cflag &= ~(CSIZE|PARENB);
- t->c_cflag |= CS8;
- t->c_cc[VMIN] = 1;
- t->c_cc[VTIME] = 0;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/closedir.c b/mdk-stage1/dietlibc/lib/closedir.c
deleted file mode 100644
index e73025eb1..000000000
--- a/mdk-stage1/dietlibc/lib/closedir.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-#include <stdlib.h>
-
-int closedir (DIR* d) {
- int res=close(d->fd);
- free(d);
- return res;
-}
diff --git a/mdk-stage1/dietlibc/lib/connect.c b/mdk-stage1/dietlibc/lib/connect.c
deleted file mode 100644
index 01fd61a6c..000000000
--- a/mdk-stage1/dietlibc/lib/connect.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_connect(int a, void * b, int c) {
-#ifdef __i386__
- return socketcall(SYS_CONNECT, (long*)&a);
-#else
- unsigned long args[] = { a, (long) b, c };
- return socketcall(SYS_CONNECT, args);
-#endif
-}
-
-int connect(int a, void * b, int c) __attribute__((weak,alias("__libc_connect")));
diff --git a/mdk-stage1/dietlibc/lib/creat.c b/mdk-stage1/dietlibc/lib/creat.c
deleted file mode 100644
index 82145b515..000000000
--- a/mdk-stage1/dietlibc/lib/creat.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <fcntl.h>
-
-int creat(const char *file,mode_t mode) {
- return open(file,O_WRONLY|O_CREAT|O_TRUNC,mode);
-}
diff --git a/mdk-stage1/dietlibc/lib/creat64.c b/mdk-stage1/dietlibc/lib/creat64.c
deleted file mode 100644
index 8cf897b57..000000000
--- a/mdk-stage1/dietlibc/lib/creat64.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <fcntl.h>
-
-#ifndef O_LARGEFILE
-#define O_LARGEFILE 0
-#endif
-
-int creat64(const char *file,mode_t mode) {
- return open(file,O_WRONLY|O_CREAT|O_TRUNC|O_LARGEFILE,mode);
-}
diff --git a/mdk-stage1/dietlibc/lib/errlist.c b/mdk-stage1/dietlibc/lib/errlist.c
deleted file mode 100644
index d0e712190..000000000
--- a/mdk-stage1/dietlibc/lib/errlist.c
+++ /dev/null
@@ -1,132 +0,0 @@
-
-const char *const sys_errlist[] = {
- "Success", /* 0 */
- "Operation not permitted", /* EPERM */
- "No such file or directory", /* ENOENT */
- "No such process", /* ESRCH */
- "Interrupted system call", /* EINTR */
- "I/O error", /* EIO */
- "No such device or address", /* ENXIO */
- "Arg list too long", /* E2BIG */
- "Exec format error", /* ENOEXEC */
- "Bad file number", /* EBADF */
- "No child processes", /* ECHILD */
- "Try again", /* EAGAIN */
- "Out of memory", /* ENOMEM */
- "Permission denied", /* EACCES */
- "Bad address", /* EFAULT */
- "Block device required", /* ENOTBLK */
- "Device or resource busy", /* EBUSY */
- "File exists", /* EEXIST */
- "Cross-device link", /* EXDEV */
- "No such device", /* ENODEV */
- "Not a directory", /* ENOTDIR */
- "Is a directory", /* EISDIR */
- "Invalid argument", /* EINVAL */
- "File table overflow", /* ENFILE */
- "Too many open files", /* EMFILE */
- "Not a typewriter", /* ENOTTY */
- "Text file busy", /* ETXTBSY */
- "File too large", /* EFBIG */
- "No space left on device", /* ENOSPC */
- "Illegal seek", /* ESPIPE */
- "Read-only file system", /* EROFS */
- "Too many links", /* EMLINK */
- "Broken pipe", /* EPIPE */
- "Math argument out of domain of func", /* EDOM */
- "Math result not representable", /* ERANGE */
- "Resource deadlock would occur", /* EDEADLK */
- "File name too long", /* ENAMETOOLONG */
- "No record locks available", /* ENOLCK */
- "Function not implemented", /* ENOSYS */
- "Directory not empty", /* ENOTEMPTY */
- "Too many symbolic links encountered", /* ELOOP */
- "Operation would block", /* EWOULDBLOCK */
- "No message of desired type", /* ENOMSG */
- "Identifier removed", /* EIDRM */
- "Channel number out of range", /* ECHRNG */
- "Level 2 not synchronized", /* EL2NSYNC */
- "Level 3 halted", /* EL3HLT */
- "Level 3 reset", /* EL3RST */
- "Link number out of range", /* ELNRNG */
- "Protocol driver not attached", /* EUNATCH */
- "No CSI structure available", /* ENOCSI */
- "Level 2 halted", /* EL2HLT */
- "Invalid exchange", /* EBADE */
- "Invalid request descriptor", /* EBADR */
- "Exchange full", /* EXFULL */
- "No anode", /* ENOANO */
- "Invalid request code", /* EBADRQC */
- "Invalid slot", /* EBADSLT */
- "File locking deadlock error", /* EDEADLOCK */
- "Bad font file format", /* EBFONT */
- "Device not a stream", /* ENOSTR */
- "No data available", /* ENODATA */
- "Timer expired", /* ETIME */
- "Out of streams resources", /* ENOSR */
- "Machine is not on the network", /* ENONET */
- "Package not installed", /* ENOPKG */
- "Object is remote", /* EREMOTE */
- "Link has been severed", /* ENOLINK */
- "Advertise error", /* EADV */
- "Srmount error", /* ESRMNT */
- "Communication error on send", /* ECOMM */
- "Protocol error", /* EPROTO */
- "Multihop attempted", /* EMULTIHOP */
- "RFS specific error", /* EDOTDOT */
- "Not a data message", /* EBADMSG */
- "Value too large for defined data type", /* EOVERFLOW */
- "Name not unique on network", /* ENOTUNIQ */
- "File descriptor in bad state", /* EBADFD */
- "Remote address changed", /* EREMCHG */
- "Can not access a needed shared library", /* ELIBACC */
- "Accessing a corrupted shared library", /* ELIBBAD */
- ".lib section in a.out corrupted", /* ELIBSCN */
- "Attempting to link in too many shared libraries", /* ELIBMAX */
- "Cannot exec a shared library directly", /* ELIBEXEC */
- "Illegal byte sequence", /* EILSEQ */
- "Interrupted system call should be restarted", /* ERESTART */
- "Streams pipe error", /* ESTRPIPE */
- "Too many users", /* EUSERS */
- "Socket operation on non-socket", /* ENOTSOCK */
- "Destination address required", /* EDESTADDRREQ */
- "Message too long", /* EMSGSIZE */
- "Protocol wrong type for socket", /* EPROTOTYPE */
- "Protocol not available", /* ENOPROTOOPT */
- "Protocol not supported", /* EPROTONOSUPPORT */
- "Socket type not supported", /* ESOCKTNOSUPPORT */
- "Operation not supported on transport endpoint", /* EOPNOTSUPP */
- "Protocol family not supported", /* EPFNOSUPPORT */
- "Address family not supported by protocol", /* EAFNOSUPPORT */
- "Address already in use", /* EADDRINUSE */
- "Cannot assign requested address", /* EADDRNOTAVAIL */
- "Network is down", /* ENETDOWN */
- "Network is unreachable", /* ENETUNREACH */
- "Network dropped connection because of reset", /* ENETRESET */
- "Software caused connection abort", /* ECONNABORTED */
- "Connection reset by peer", /* ECONNRESET */
- "No buffer space available", /* ENOBUFS */
- "Transport endpoint is already connected", /* EISCONN */
- "Transport endpoint is not connected", /* ENOTCONN */
- "Cannot send after transport endpoint shutdown", /* ESHUTDOWN */
- "Too many references: cannot splice", /* ETOOMANYREFS */
- "Connection timed out", /* ETIMEDOUT */
- "Connection refused", /* ECONNREFUSED */
- "Host is down", /* EHOSTDOWN */
- "No route to host", /* EHOSTUNREACH */
- "Operation already in progress", /* EALREADY */
- "Operation now in progress", /* EINPROGRESS */
- "Stale NFS file handle", /* ESTALE */
- "Structure needs cleaning", /* EUCLEAN */
- "Not a XENIX named type file", /* ENOTNAM */
- "No XENIX semaphores available", /* ENAVAIL */
- "Is a named type file", /* EISNAM */
- "Remote I/O error", /* EREMOTEIO */
- "Quota exceeded", /* EDQUOT */
- "No medium found", /* ENOMEDIUM */
- "Wrong medium type", /* EMEDIUMTYPE */
- 0
-};
-
-
-const int sys_nerr = ((sizeof (sys_errlist))/(sizeof(char *))-1);
diff --git a/mdk-stage1/dietlibc/lib/errno_location.c b/mdk-stage1/dietlibc/lib/errno_location.c
deleted file mode 100644
index 286f833c9..000000000
--- a/mdk-stage1/dietlibc/lib/errno_location.c
+++ /dev/null
@@ -1,5 +0,0 @@
-extern int errno;
-
-int *__errno_location() { return &errno; }
-
-int *errno_location() __attribute__((weak,alias("__errno_location")));
diff --git a/mdk-stage1/dietlibc/lib/exec_lib.c b/mdk-stage1/dietlibc/lib/exec_lib.c
deleted file mode 100644
index 3129224a0..000000000
--- a/mdk-stage1/dietlibc/lib/exec_lib.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <unistd.h>
-#include <paths.h>
-
-extern char **environ;
-
-int __exec_shell(const char *file, char *const argv[]) {
- int i;
-
- for (i = 0; argv[i]; i++);
-
- {
- char *shell_argv[i + 1];
- shell_argv[0] = _PATH_BSHELL;
- shell_argv[1] = (char *) file;
- for (; i > 1; i--)
- shell_argv[i] = argv[i - 1];
- return execve(_PATH_BSHELL, shell_argv, environ);
- }
-}
-
diff --git a/mdk-stage1/dietlibc/lib/exec_lib.h b/mdk-stage1/dietlibc/lib/exec_lib.h
deleted file mode 100644
index 0971bd1fb..000000000
--- a/mdk-stage1/dietlibc/lib/exec_lib.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __EXEC_LIB_H
-#define __EXEC_LIB_H
-
-#include <paths.h>
-
-extern int __exec_shell(const char *file, char *const argv[]);
-
-#endif /* __EXEC_LIB_H */
-
diff --git a/mdk-stage1/dietlibc/lib/execl.c b/mdk-stage1/dietlibc/lib/execl.c
deleted file mode 100644
index 71459e71f..000000000
--- a/mdk-stage1/dietlibc/lib/execl.c
+++ /dev/null
@@ -1,24 +0,0 @@
-#include <stdarg.h>
-#include <unistd.h>
-#include <errno.h>
-#include <stdlib.h>
-
-int execl( const char *path,...) {
- va_list ap;
- int n,i;
- char **argv,*tmp;
- va_start(ap, path);
- n=1;
- while ((tmp=va_arg(ap,char *)))
- ++n;
- va_end (ap);
- if ((argv=(char **)alloca(n*sizeof(char*)))) {
- va_start(ap, path);
- for (i=0; i<n; ++i)
- argv[i]=va_arg(ap,char *);
- va_end (ap);
- return execve(path,argv,environ);
- }
- __set_errno(ENOMEM);
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/execlp.c b/mdk-stage1/dietlibc/lib/execlp.c
deleted file mode 100644
index 3aea1e960..000000000
--- a/mdk-stage1/dietlibc/lib/execlp.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#include <stdarg.h>
-#include <unistd.h>
-#include <errno.h>
-#include <stdlib.h>
-#include "dietstdarg.h"
-
-int execlp(const char* file, const char *arg,...) {
- va_list ap,bak;
- int n,i;
- char **argv,*tmp;
- va_start(ap, arg);
- va_copy(bak,ap);
- n=2;
- while ((tmp=va_arg(ap,char *)))
- ++n;
- va_end (ap);
- if ((argv=(char **)alloca(n*sizeof(char*)))) {
- argv[0]=arg;
- for (i=0; i<n; ++i)
- argv[i+1]=va_arg(bak,char *);
- va_end (bak);
- return execvp(file,argv);
- }
- __set_errno(ENOMEM);
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/execv.c b/mdk-stage1/dietlibc/lib/execv.c
deleted file mode 100644
index efd760253..000000000
--- a/mdk-stage1/dietlibc/lib/execv.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <limits.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include "exec_lib.h"
-
-int execv(const char *file, char *const argv[]) {
- if (execve(file,argv,environ)==-1) {
- if (errno==ENOEXEC) __exec_shell(file,argv);
- }
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/execvp.c b/mdk-stage1/dietlibc/lib/execvp.c
deleted file mode 100644
index 20521d69f..000000000
--- a/mdk-stage1/dietlibc/lib/execvp.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <limits.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include "exec_lib.h"
-
-int execvp(const char *file, char *const argv[]) {
- char *path=getenv("PATH");
- char *cur,*next;
- char buf[PATH_MAX];
- if (strchr((char*)file,'/')) {
- if (execve(file,argv,environ)==-1) {
- if (errno==ENOEXEC) __exec_shell(file,argv);
- return -1;
- }
- }
- if (!path) path=_PATH_DEFPATH;
- for (cur=path; cur; cur=next) {
- next=strchr(cur,':');
- if (!next)
- next=cur+strlen(cur);
- if (next==cur) {
- buf[0]='.';
- cur--;
- } else
- memmove(buf,cur,next-cur);
- buf[next-cur]='/';
- memmove(&buf[next-cur+1],file,strlen(file)+1);
- if (execve(buf,argv,environ)==-1) {
- if (errno==ENOEXEC) return __exec_shell(buf,argv);
- if ((errno!=EACCES) && (errno!=ENOENT)) return -1;
- }
- if (*next==0) break;
- next++;
- }
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/ftw.c b/mdk-stage1/dietlibc/lib/ftw.c
deleted file mode 100644
index a3c04af9a..000000000
--- a/mdk-stage1/dietlibc/lib/ftw.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include <linux/stat.h>
-#include <unistd.h>
-#include <limits.h>
-#include <ftw.h>
-#include <dirent.h>
-#include <string.h>
-#include <stdlib.h>
-
-int ftw(const char *dir,int (*fn)(const char *file, const struct stat *sb, int flag), int depth) {
- char *cwd;
- int cwdlen;
- DIR *d;
- struct dirent *de;
- struct stat sb;
- if (chdir(dir)) return -1;
- cwd=alloca(PATH_MAX+1);
- if (!getcwd(cwd,PATH_MAX)) return -1;
- cwd[PATH_MAX]=0;
- cwdlen=strlen(cwd);
-/* write(1,"ftw in ",7); puts(cwd); */
- if (!(d=opendir("."))) return -1;
- while ((de=readdir(d))) {
- int res;
- int flag;
- int nlen;
- char *filename;
- if (de->d_name[0]=='.' &&
- (de->d_name[1]==0 ||
- (de->d_name[1]=='.' && de->d_name[2]==0))) continue;
- nlen=strlen(de->d_name);
- filename=alloca(nlen+cwdlen+3);
- memmove(filename,cwd,cwdlen);
- filename[cwdlen]='/';
- memmove(filename+cwdlen+1,de->d_name,nlen+1);
- if (!lstat(de->d_name,&sb)) {
- if (S_ISLNK(sb.st_mode)) flag=FTW_SL; else
- if (S_ISDIR(sb.st_mode)) flag=FTW_D; else
- flag=FTW_F;
- } else
- flag=FTW_NS;
- res=fn(filename,&sb,flag);
- if (res) return res;
- if (flag==FTW_D && depth>0) {
- res=ftw(filename,fn,depth-1);
- chdir(dir);
- if (res) return res;
- }
-/* puts(de->d_name); */
- }
- closedir(d);
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/getdomainname.c b/mdk-stage1/dietlibc/lib/getdomainname.c
deleted file mode 100644
index 2554fe4c3..000000000
--- a/mdk-stage1/dietlibc/lib/getdomainname.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#define _GNU_SOURCE
-
-#include <sys/types.h>
-#include <sys/utsname.h>
-
-int getdomainname(char *name,size_t len) {
- struct utsname u;
- int res=uname(&u);
- if (res==0) {
- int i;
- if (len>=_UTSNAME_DOMAIN_LENGTH)
- len=_UTSNAME_DOMAIN_LENGTH;
- for (i=0; i<len; i++)
- name[i]=u.domainname[i];
- }
- return res;
-}
diff --git a/mdk-stage1/dietlibc/lib/getenv.c b/mdk-stage1/dietlibc/lib/getenv.c
deleted file mode 100644
index fc37e9927..000000000
--- a/mdk-stage1/dietlibc/lib/getenv.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <string.h>
-
-extern char **environ;
-
-extern char *getenv(const char *s)
-{
- int i;
- unsigned int len;
-
- if (!environ || !s) return 0;
- len = strlen(s);
- for (i = 0;environ[i];++i)
- if ((memcmp(environ[i],s,len)==0) && (environ[i][len] == '='))
- return environ[i] + len + 1;
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/gethostname.c b/mdk-stage1/dietlibc/lib/gethostname.c
deleted file mode 100644
index ccc0fbc8e..000000000
--- a/mdk-stage1/dietlibc/lib/gethostname.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#define _GNU_SOURCE
-
-#include <sys/types.h>
-#include <sys/utsname.h>
-
-int gethostname(char *name,size_t len) {
- struct utsname u;
- int res=uname(&u);
- if (res==0) {
- int i;
- if (len>=_UTSNAME_NODENAME_LENGTH)
- len=_UTSNAME_NODENAME_LENGTH;
- for (i=0; i<len; i++)
- name[i]=u.nodename[i];
- }
- return res;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/getopt.c b/mdk-stage1/dietlibc/lib/getopt.c
deleted file mode 100644
index 93097122f..000000000
--- a/mdk-stage1/dietlibc/lib/getopt.c
+++ /dev/null
@@ -1,118 +0,0 @@
-#include "getopt.h"
-#include <string.h>
-
-/*
- * by Olaf Dreesen
- */
-
-int opterr;
-
-int optind=1;
-char *optarg;
-
-static int opt_unknown=1,opt_unknown_len;
-
-static int getopt_check(int c,char*o,int ol)
-{
- int i;
- if (c==':') return 2;
- for (i=0;i<ol;i++)
- {
- if (o[i]==c)
- {
- if (o[i+1]==':') return 1;
- return 0;
- }
- }
- return 2;
-}
-
-static void getopt_sort(char*v[],int oi)
-{
- int i;
- char *tmp, *tmp2=0;
-
- if (opt_unknown_len)
- {
- tmp=v[optind-(1+oi)];
- if (oi) tmp2=v[optind-1];
-
- for (i=opt_unknown+opt_unknown_len;i>opt_unknown;i--) v[i+oi]=v[i-1];
-
- v[opt_unknown++]=tmp;
- if (oi) v[opt_unknown++]=tmp2;
- }
-}
-
-static char* nextchar;
-int getopt(int c,char*v[],char*o)
-{
- int ol=strlen(o);
- int ret=0;
- int oi=0;
-
- optarg=0;
-
- while (nextchar || (optind<c))
- {
- if (nextchar)
- {
- if ((ret=(*(++nextchar))))
- {
- switch (getopt_check(ret,o,ol))
- {
- case 1:
- if (*(++nextchar))
- optarg=nextchar;
- else
- {
- if (optind<c)
- {
- oi=1;
- optarg=v[optind++];
- }
- else
- ret='?';
- }
- nextchar=0;
- case 0:
- if (!nextchar)
- getopt_sort(v,oi);
- else
- if (!(*(nextchar+1)))
- getopt_sort(v,oi);
- return ret;
- break;
- default:
- return '?';
- break;
- }
- }
- else
- nextchar=0;
- }
- else
- {
- if ((v[optind][0]=='-')&&((v[optind][1]!=0)))
- {
- if ((v[optind][1]=='-')&&(v[optind][2]==0))
- {
- getopt_sort(v,oi);
- optind=opt_unknown;
- return -1;
- }
- else
- {
- nextchar=v[optind];
- }
- }
- else
- {
- ++opt_unknown_len;
- }
- ++optind;
- }
- }
- optind=opt_unknown;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/lib/getpeername.c b/mdk-stage1/dietlibc/lib/getpeername.c
deleted file mode 100644
index 8adcddf55..000000000
--- a/mdk-stage1/dietlibc/lib/getpeername.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int getpeername(int a, void * b, int c) {
-#ifdef __i386__
- return socketcall(SYS_GETPEERNAME, (long*)&a);
-#else
- unsigned long args[] = { a, (long) b, c };
- return socketcall(SYS_GETPEERNAME, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/getpgrp.c b/mdk-stage1/dietlibc/lib/getpgrp.c
deleted file mode 100644
index ee2ab0257..000000000
--- a/mdk-stage1/dietlibc/lib/getpgrp.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <unistd.h>
-
-int getpgrp()
-{
- return getpgid(0);
-}
diff --git a/mdk-stage1/dietlibc/lib/getservent.c b/mdk-stage1/dietlibc/lib/getservent.c
deleted file mode 100644
index bf25d046b..000000000
--- a/mdk-stage1/dietlibc/lib/getservent.c
+++ /dev/null
@@ -1,137 +0,0 @@
-#include <unistd.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <sys/mman.h>
-#include <errno.h>
-#include <netinet/in.h>
-#include <string.h>
-#include <ctype.h>
-
-static int servicesfd=-1;
-static char* servicesmap;
-static unsigned int serviceslen;
-
-static char* aliases[10];
-
-static char *cur;
-
-/* nameserver 42/tcp name # IEN 116 */
-struct servent *getservent(void) {
- static struct servent se;
- char *last;
- int aliasidx;
- if (servicesfd<0) {
- servicesfd=open(_PATH_SERVICES,O_RDONLY);
- if (servicesfd<0) return 0;
- serviceslen=lseek(servicesfd,0,SEEK_END);
- servicesmap=mmap(0,serviceslen,PROT_READ|PROT_WRITE,MAP_PRIVATE,servicesfd,0);
- if ((long)servicesmap==(-1)) goto error;
- cur=servicesmap;
- }
- last=servicesmap+serviceslen;
-again:
- se.s_name=0;
- se.s_aliases=aliases; aliases[0]=0;
- se.s_port=0;
- se.s_proto=0;
- if (cur>=last) return 0;
- if (*cur=='#' || *cur=='\n') goto parseerror;
- /* first, the primary name */
- if (!isalpha(*cur)) goto parseerror;
- se.s_name=cur;
- se.s_aliases=aliases;
- while (cur<last && isalnum(*cur)) cur++;
- if (cur>=last) return 0;
- if (*cur=='\n') goto parseerror;
- *cur=0; cur++;
- /* second, the port */
- while (cur<last && isblank(*cur)) cur++;
- while (cur<last && isdigit(*cur)) {
- se.s_port=se.s_port*10+*cur-'0';
- cur++;
- }
- se.s_port=htons(se.s_port);
- if (cur>=last) return 0;
- /* third, "/tcp" or "/udp" */
- if (*cur!='/') goto parseerror;
- cur++;
- se.s_proto=cur;
- while (cur<last && isalpha(*cur)) ++cur;
- if (cur>=last) return 0;
- if (*cur=='\n') { *cur++=0; return &se; }
- *cur=0; cur++;
- /* now the aliases */
- for (aliasidx=0;aliasidx<10;++aliasidx) {
- while (cur<last && isblank(*cur)) ++cur;
- aliases[aliasidx]=cur;
- while (cur<last && isalpha(*cur)) ++cur;
- if (*cur=='\n') { *cur++=0; ++aliasidx; break; }
- if (cur>=last || !isblank(*cur)) break;
- *cur++=0;
- }
- aliases[aliasidx]=0;
- return &se;
-parseerror:
- while (cur<last && *cur!='\n') cur++;
- cur++;
- goto again;
-error:
- if (servicesmap!=(char*)-1) munmap(servicesmap,serviceslen);
- if (servicesfd!=-1) close(servicesfd);
- servicesmap=(char*)-1;
- servicesfd=-1;
- errno=ENOMEM;
- return 0;
-}
-
-void setservent(int stayopen) {
- cur=servicesmap;
-}
-
-struct servent *getservbyname(const char *name, const char *proto) {
- struct servent *s;
- setservent(0);
- for (s=getservent(); s; s=getservent()) {
- char **tmp;
-#if 0
- write(1,"found ",6);
- write(1,s->s_name,strlen(s->s_name));
- write(1,"/",1);
- write(1,s->s_proto,strlen(s->s_proto));
- write(1,"\n",1);
- if (!strcmp(name,"auth")) {
- tmp=s->s_aliases;
- write(1," aka ",5);
- while (*tmp) {
- write(1,*tmp,strlen(*tmp));
- write(1,", ",2);
- ++tmp;
- }
- write(1,"\n",1);
- }
-#endif
- if (!strcmp(name,s->s_name) && !strcmp(proto,s->s_proto))
- return s;
- tmp=s->s_aliases;
- while (*tmp)
- if (!strcmp(name,*tmp++)) return s;
- }
- return 0;
-}
-
-struct servent *getservbyport(int port, const char *proto) {
- struct servent *s;
- for (s=getservent(); s; s=getservent()) {
- if (port==s->s_port && !strcmp(proto,s->s_proto))
- return s;
- }
- return 0;
-}
-
-void endservent(void) {
- if (servicesmap!=(char*)-1) munmap(servicesmap,serviceslen);
- if (servicesfd!=-1) close(servicesfd);
- servicesmap=(char*)-1;
- servicesfd=-1;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/getsockname.c b/mdk-stage1/dietlibc/lib/getsockname.c
deleted file mode 100644
index 61a3ea24a..000000000
--- a/mdk-stage1/dietlibc/lib/getsockname.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int getsockname(int a, void * b, int c) {
-#ifdef __i386__
- return socketcall(SYS_GETSOCKNAME, (long*)&a);
-#else
- unsigned long args[] = { a, (long) b, c };
- return socketcall(SYS_GETSOCKNAME, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/getsockopt.c b/mdk-stage1/dietlibc/lib/getsockopt.c
deleted file mode 100644
index 8c0a57557..000000000
--- a/mdk-stage1/dietlibc/lib/getsockopt.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int getsockopt(int a, int b, int c, void *d, int e) {
-#ifdef __i386__
- return socketcall(SYS_GETSOCKOPT, (long*)&a);
-#else
- unsigned long args[] = { a, b, c, (long)d, e };
- return socketcall(SYS_GETSOCKOPT, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/htonl.c b/mdk-stage1/dietlibc/lib/htonl.c
deleted file mode 100644
index 490de42c4..000000000
--- a/mdk-stage1/dietlibc/lib/htonl.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <endian.h>
-
-unsigned long int htonl(unsigned long int hostlong) {
-#if __BYTE_ORDER==__LITTLE_ENDIAN
- return (hostlong>>24) | ((hostlong&0xff0000)>>8) |
- ((hostlong&0xff00)<<8) | (hostlong<<24);
-#else
- return hostlong;
-#endif
-}
-
-unsigned long int ntohl(unsigned long int hostlong) __attribute__((weak,alias("htonl")));
diff --git a/mdk-stage1/dietlibc/lib/htons.c b/mdk-stage1/dietlibc/lib/htons.c
deleted file mode 100644
index 765d3bbc5..000000000
--- a/mdk-stage1/dietlibc/lib/htons.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <endian.h>
-
-unsigned short int htons(unsigned short int hostshort) {
-#if __BYTE_ORDER==__LITTLE_ENDIAN
- return ((hostshort>>8)&0xff) | (hostshort<<8);
-#else
- return hostshort;
-#endif
-}
-
-unsigned short int ntohs(unsigned short int hostshort) __attribute__((weak,alias("htons")));
diff --git a/mdk-stage1/dietlibc/lib/if_indextoname.c b/mdk-stage1/dietlibc/lib/if_indextoname.c
deleted file mode 100644
index e683755f6..000000000
--- a/mdk-stage1/dietlibc/lib/if_indextoname.c
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <linux/if.h>
-#include <linux/net.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-#include <sys/socket.h>
-
-#ifndef SOCK_DGRAM
-#define SOCK_DGRAM 2
-#endif
-
-char* if_indextoname(unsigned int interface,char* blub) {
- struct ifreq ifr;
- int fd;
-
- fd=socket(AF_INET6,SOCK_DGRAM,0);
- if (fd<0) fd=socket(AF_INET,SOCK_DGRAM,0);
- ifr.ifr_ifindex=interface;
- if (ioctl(fd,SIOCGIFNAME,&ifr)==0) {
- int i;
- close(fd);
- for (i=0; i<IFNAMSIZ-1; i++)
- if (!(blub[i]=ifr.ifr_name[i]))
- return blub;
- blub[i]=0;
- return blub;
- }
- close(fd);
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/if_nametoindex.c b/mdk-stage1/dietlibc/lib/if_nametoindex.c
deleted file mode 100644
index 5923963b1..000000000
--- a/mdk-stage1/dietlibc/lib/if_nametoindex.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#include <linux/if.h>
-#include <linux/net.h>
-#include <sys/ioctl.h>
-#include <unistd.h>
-#include <sys/socket.h>
-
-#ifndef SOCK_DGRAM
-#define SOCK_DGRAM 2
-#endif
-
-int if_nametoindex(char* blub) {
- struct ifreq ifr;
- int fd;
- char *tmp;
- int len=sizeof(ifr.ifr_name);
- fd=socket(AF_INET6,SOCK_DGRAM,0);
- if (fd<0) fd=socket(AF_INET,SOCK_DGRAM,0);
- for (tmp=ifr.ifr_name; len>0; --len) {
- if ((*tmp++=*blub++)==0) break;
- }
- if (ioctl(fd,SIOCGIFINDEX,&ifr)==0) {
- close(fd);
- return ifr.ifr_ifindex;
- }
- close(fd);
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/isalnum.c b/mdk-stage1/dietlibc/lib/isalnum.c
deleted file mode 100644
index 4d363fab9..000000000
--- a/mdk-stage1/dietlibc/lib/isalnum.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __isalnum_ascii(int c) {
- return isalpha(c) || isdigit(c);
-}
-
-int isalnum(int c) __attribute__((weak,alias("__isalnum_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isalpha.c b/mdk-stage1/dietlibc/lib/isalpha.c
deleted file mode 100644
index 07ea69696..000000000
--- a/mdk-stage1/dietlibc/lib/isalpha.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __isalpha_ascii(int c) {
- return (c>='a' && c<='z') || (c>='A' && c<='Z');
-}
-
-int isalpha(int c) __attribute__((weak,alias("__isalpha_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isascii.c b/mdk-stage1/dietlibc/lib/isascii.c
deleted file mode 100644
index e06994783..000000000
--- a/mdk-stage1/dietlibc/lib/isascii.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <ctype.h>
-
-int isascii(int c) {
- return (c & 0x80) == 0;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/isatty.c b/mdk-stage1/dietlibc/lib/isatty.c
deleted file mode 100644
index b31609720..000000000
--- a/mdk-stage1/dietlibc/lib/isatty.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#define ioctl libc_ioctl
-#include <termios.h>
-#undef ioctl
-#include <sys/ioctl.h>
-
-extern int errno;
-
-int isatty(int fd)
-{
- int save;
- int is_tty;
- struct termios term;
-
- save = errno;
- is_tty = ioctl(fd, TCGETS, &term) == 0;
- errno = save;
-
- return is_tty;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/isblank.c b/mdk-stage1/dietlibc/lib/isblank.c
deleted file mode 100644
index 034e543b1..000000000
--- a/mdk-stage1/dietlibc/lib/isblank.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <ctype.h>
-
-int isblank(int ch)
-{
- return ((ch==' ')||(ch=='\t'));
-}
diff --git a/mdk-stage1/dietlibc/lib/iscntrl.c b/mdk-stage1/dietlibc/lib/iscntrl.c
deleted file mode 100644
index a183a54f1..000000000
--- a/mdk-stage1/dietlibc/lib/iscntrl.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __iscntrl_ascii(int c) {
- return (c<32) || (c==127);
-}
-
-int iscntrl(int c) __attribute__((weak,alias("__iscntrl_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isdigit.c b/mdk-stage1/dietlibc/lib/isdigit.c
deleted file mode 100644
index 8a7c3e801..000000000
--- a/mdk-stage1/dietlibc/lib/isdigit.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __isdigit_ascii(int c) {
- return (c>='0' && c<='9');
-}
-
-int isdigit(int c) __attribute__((weak,alias("__isdigit_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isgraph.c b/mdk-stage1/dietlibc/lib/isgraph.c
deleted file mode 100644
index 807f90ff0..000000000
--- a/mdk-stage1/dietlibc/lib/isgraph.c
+++ /dev/null
@@ -1,5 +0,0 @@
-int __isgraph_ascii(int c) {
- return (c>=33 && c<=126);
-}
-
-int isgraph(int c) __attribute__((weak,alias("__isgraph_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/islower.c b/mdk-stage1/dietlibc/lib/islower.c
deleted file mode 100644
index 6a9afa519..000000000
--- a/mdk-stage1/dietlibc/lib/islower.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __islower_ascii(int c) {
- return (c>='a' && c<='z');
-}
-
-int islower(int c) __attribute__((weak,alias("__islower_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isprint.c b/mdk-stage1/dietlibc/lib/isprint.c
deleted file mode 100644
index e980658a5..000000000
--- a/mdk-stage1/dietlibc/lib/isprint.c
+++ /dev/null
@@ -1,6 +0,0 @@
-
-int __isprint_ascii(int c) {
- return (c>=32 && c<=126);
-}
-
-int isprint(int c) __attribute__((weak,alias("__isprint_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/ispunct.c b/mdk-stage1/dietlibc/lib/ispunct.c
deleted file mode 100644
index 2fd1183b1..000000000
--- a/mdk-stage1/dietlibc/lib/ispunct.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __ispunct_ascii(int c) {
- return isprint(c) && !( isalnum(c) || isspace(c) );
-}
-
-int ispunct(int c) __attribute__((weak,alias("__ispunct_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isspace.c b/mdk-stage1/dietlibc/lib/isspace.c
deleted file mode 100644
index 916f784ab..000000000
--- a/mdk-stage1/dietlibc/lib/isspace.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <ctype.h>
-
-int __isspace_ascii(int ch)
-{
- return ((ch==' ')||(ch=='\f')||(ch=='\t')||(ch=='\v')||(ch=='\r')||(ch=='\n'));
-}
-
-int isspace(int c) __attribute__((weak,alias("__isspace_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isupper.c b/mdk-stage1/dietlibc/lib/isupper.c
deleted file mode 100644
index 933dfc169..000000000
--- a/mdk-stage1/dietlibc/lib/isupper.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <ctype.h>
-
-int __isupper_ascii(int c) {
- return (c>='A' && c<='Z');
-}
-
-int isupper(int c) __attribute__((weak,alias("__isupper_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/isxdigit.c b/mdk-stage1/dietlibc/lib/isxdigit.c
deleted file mode 100644
index 22a711f2d..000000000
--- a/mdk-stage1/dietlibc/lib/isxdigit.c
+++ /dev/null
@@ -1,5 +0,0 @@
-int __isxdigit_ascii(int c) {
- return ((c>='0'&&c<='9') || (c>='A'&&c<='F') || (c>='a'&&c<='f'));
-}
-
-int isxdigit(int c) __attribute__((weak,alias("__isxdigit_ascii")));
diff --git a/mdk-stage1/dietlibc/lib/listen.c b/mdk-stage1/dietlibc/lib/listen.c
deleted file mode 100644
index 56a51be06..000000000
--- a/mdk-stage1/dietlibc/lib/listen.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int listen(int a, int b) {
-#ifdef __i386__
- return socketcall(SYS_LISTEN, (long*)&a);
-#else
- unsigned long args[] = { a, b, 0 };
- return socketcall(SYS_LISTEN, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/lockf.c b/mdk-stage1/dietlibc/lib/lockf.c
deleted file mode 100644
index 2b1d004ef..000000000
--- a/mdk-stage1/dietlibc/lib/lockf.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <errno.h>
-
-int lockf(int fd, int cmd, off_t len) {
- struct flock fl;
- fl.l_whence=SEEK_CUR;
- fl.l_start=0;
- fl.l_len=len;
- fl.l_pid=0;
- switch (cmd) {
- case F_TEST:
- if (fcntl(fd,F_GETLK,&fl)<0)
- return -1;
- if (fl.l_type == F_UNLCK || fl.l_pid == getpid ())
- return 0;
- errno=EACCES;
- return -1;
- case F_ULOCK:
- fl.l_type=F_UNLCK;
- cmd=F_SETLK;
- break;
- case F_LOCK:
- fl.l_type = F_WRLCK;
- cmd = F_SETLKW;
- break;
- case F_TLOCK:
- fl.l_type = F_WRLCK;
- cmd = F_SETLK;
- break;
- default:
- errno=EINVAL;
- return -1;
- }
- return fcntl(fd,cmd,&fl);
-}
diff --git a/mdk-stage1/dietlibc/lib/longjmp.c b/mdk-stage1/dietlibc/lib/longjmp.c
deleted file mode 100644
index d0a5719c1..000000000
--- a/mdk-stage1/dietlibc/lib/longjmp.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Copyright (C) 1991, 92, 94, 95, 97, 98 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/* #include <stddef.h> */
-#include <setjmp.h>
-#include <signal.h>
-
-extern int __sigprocmask(int how,void* set,void* oldset);
-extern void __longjmp(void* env, int val);
-
-/*
-extern void _longjmp_unwind (jmp_buf env, int val);
-*/
-/* Set the signal mask to the one specified in ENV, and jump
- to the position specified in ENV, causing the setjmp
- call there to return VAL, or 1 if VAL is 0. */
-void __siglongjmp (sigjmp_buf env, int val)
-{
- /* Perform any cleanups needed by the frames being unwound. */
- /*
- _longjmp_unwind (env, val);
- */
-
- if (env[0].__mask_was_saved)
- /* Restore the saved signal mask. */
- (void) __sigprocmask (SIG_SETMASK, &env[0].__saved_mask,
- (sigset_t *) NULL);
-
- /* Call the machine-dependent function to restore machine state. */
- __longjmp (env[0].__jmpbuf, val ?: 1);
-}
-
-void siglongjmp (sigjmp_buf env, int val) __attribute__((weak,alias("__siglongjmp")));
-void longjmp (sigjmp_buf env, int val) __attribute__((weak,alias("__siglongjmp")));
-void _longjmp (sigjmp_buf env, int val) __attribute__((weak,alias("__siglongjmp")));
-void __libc_longjmp (sigjmp_buf env, int val) __attribute__((weak,alias("__siglongjmp")));
diff --git a/mdk-stage1/dietlibc/lib/lseek64.c b/mdk-stage1/dietlibc/lib/lseek64.c
deleted file mode 100644
index f39e779f9..000000000
--- a/mdk-stage1/dietlibc/lib/lseek64.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include "dietfeatures.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-#include <sys/stat.h>
-#ifndef __NO_STAT64
-#include <errno.h>
-#include <unistd.h>
-
-loff_t lseek64(int fildes, loff_t offset, int whence) {
- loff_t tmp;
- if (llseek(fildes,offset>>32,offset&0xffffffff,&tmp,whence)) {
-#ifdef WANT_THREAD_SAFE
- if (*__errno_location()!=ENOSYS) return -1;
-#else
- if (errno!=ENOSYS) return -1;
-#endif
- return (loff_t)lseek(fildes,(off_t)offset,whence);
- }
- return tmp;
-}
-#endif
-#endif
diff --git a/mdk-stage1/dietlibc/lib/memccmp.c b/mdk-stage1/dietlibc/lib/memccmp.c
deleted file mode 100644
index 3a8c14f60..000000000
--- a/mdk-stage1/dietlibc/lib/memccmp.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#define _POSIX_SOURCE
-#define _XOPEN_SOURCE
-#include <sys/types.h>
-
-int memccmp(const void *dst, const void *src, int c, size_t count)
-{
- register const char *a = dst;
- register const char *b = src;
- while (count--)
- {
- register int res=(*a - *b);
- if (res) return res;
- if (*a==c) return 0;
- ++a; ++b;
- }
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/memccpy.c b/mdk-stage1/dietlibc/lib/memccpy.c
deleted file mode 100644
index 6d6ac98ab..000000000
--- a/mdk-stage1/dietlibc/lib/memccpy.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#define _POSIX_SOURCE
-#define _XOPEN_SOURCE
-#include <sys/types.h>
-
-void *memccpy(void *dst, const void *src, int c, size_t count)
-{
- char *a = dst;
- const char *b = src;
- while (count--)
- {
- *a++ = *b;
- if (*b==c)
- {
- return (void *)a;
- }
- b++;
- }
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/memchr.c b/mdk-stage1/dietlibc/lib/memchr.c
deleted file mode 100644
index 93d81328a..000000000
--- a/mdk-stage1/dietlibc/lib/memchr.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <sys/types.h>
-
-char *memchr(const char *s, int c, size_t n) {
- int i;
- for (i=n; i; --i)
- if (*s++==c)
- return (char*)s;
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/memcmp.c b/mdk-stage1/dietlibc/lib/memcmp.c
deleted file mode 100644
index c05a46863..000000000
--- a/mdk-stage1/dietlibc/lib/memcmp.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <sys/types.h>
-
-int memcmp(const void *dst, const void *src, size_t count) {
- register int r;
- register const char *d=dst;
- register const char *s=src;
- while (count--) {
- if ((r=(*d - *s)))
- return r;
- ++d;
- ++s;
- }
- return 0;
-}
-
-int bcmp(const char *a,const char *b,size_t c) __attribute__((weak,alias("memcmp")));
diff --git a/mdk-stage1/dietlibc/lib/memcpy.c b/mdk-stage1/dietlibc/lib/memcpy.c
deleted file mode 100644
index 0c688b509..000000000
--- a/mdk-stage1/dietlibc/lib/memcpy.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <sys/types.h>
-
-void* memcpy(void* dst, const void* src, size_t count) {
- register char *d=dst;
- register const char *s=src;
- ++count; /* this actually produces better code than using count-- */
- while (--count) {
- *d = *s;
- ++d; ++s;
- }
- return dst;
-}
diff --git a/mdk-stage1/dietlibc/lib/memmove.c b/mdk-stage1/dietlibc/lib/memmove.c
deleted file mode 100644
index 7adb2be91..000000000
--- a/mdk-stage1/dietlibc/lib/memmove.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#define _POSIX_SOURCE
-#define _XOPEN_SOURCE
-#include <sys/types.h>
-
-void *memmove(void *dst, const void *src, size_t count)
-{
- char *a = dst;
- const char *b = src;
- if (src!=dst)
- {
- if (src>dst)
- {
- while (count--) *a++ = *b++;
- }
- else
- {
- a+=count-1;
- b+=count-1;
- while (count--) *a-- = *b--;
- }
- }
- return dst;
-}
diff --git a/mdk-stage1/dietlibc/lib/memset.c b/mdk-stage1/dietlibc/lib/memset.c
deleted file mode 100644
index 5f9ae49ee..000000000
--- a/mdk-stage1/dietlibc/lib/memset.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <sys/types.h>
-
-void * memset(void * dst, int s, size_t count) {
- register char * a = dst;
- count++; /* this actually creates smaller code than using count-- */
- while (--count)
- *a++ = s;
- return dst;
-}
diff --git a/mdk-stage1/dietlibc/lib/mkfifo.c b/mdk-stage1/dietlibc/lib/mkfifo.c
deleted file mode 100644
index 596efbe27..000000000
--- a/mdk-stage1/dietlibc/lib/mkfifo.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <linux/stat.h>
-#include <unistd.h>
-
-int mkfifo(const char *fn,mode_t mode) {
- return mknod(fn,S_IFIFO|mode,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/msgctl.c b/mdk-stage1/dietlibc/lib/msgctl.c
deleted file mode 100644
index 19ea6d8cf..000000000
--- a/mdk-stage1/dietlibc/lib/msgctl.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/msg.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int msgctl(int msqid, int cmd, struct msqid_ds *buf) {
- return __ipc(MSGCTL,msqid,cmd,0,buf);
-}
diff --git a/mdk-stage1/dietlibc/lib/msgget.c b/mdk-stage1/dietlibc/lib/msgget.c
deleted file mode 100644
index 9bca09ebe..000000000
--- a/mdk-stage1/dietlibc/lib/msgget.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/msg.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int msgget(key_t key,int flag) {
- return __ipc(MSGGET,key,flag,0,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/msgrcv.c b/mdk-stage1/dietlibc/lib/msgrcv.c
deleted file mode 100644
index b4ae9cc6c..000000000
--- a/mdk-stage1/dietlibc/lib/msgrcv.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/msg.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int msgrcv(int msqid, void *msgp, size_t msgsz, long int msgtyp, int msgflg) {
- struct ipc_kludge tmp;
- tmp.msgp = msgp;
- tmp.msgtyp = msgtyp;
- return __ipc(MSGRCV,msqid, msgsz, msgflg, &tmp);
-}
diff --git a/mdk-stage1/dietlibc/lib/msgsnd.c b/mdk-stage1/dietlibc/lib/msgsnd.c
deleted file mode 100644
index 6203053f0..000000000
--- a/mdk-stage1/dietlibc/lib/msgsnd.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/msg.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int msgsnd (int msqid, const void *msgp, size_t msgsz, int msgflg) {
- return __ipc(MSGSND,msqid, msgsz, msgflg, msgp);
-}
diff --git a/mdk-stage1/dietlibc/lib/nop.c b/mdk-stage1/dietlibc/lib/nop.c
deleted file mode 100644
index c05bea813..000000000
--- a/mdk-stage1/dietlibc/lib/nop.c
+++ /dev/null
@@ -1,7 +0,0 @@
-
-int __fflush_stdin() __attribute__((weak,alias("__return0")));
-int __fflush_stdout() __attribute__((weak,alias("__return0")));
-int __fflush_stderr() __attribute__((weak,alias("__return0")));
-
-/* used for weak aliases */
-int __return0() { return 0; }
diff --git a/mdk-stage1/dietlibc/lib/open64.c b/mdk-stage1/dietlibc/lib/open64.c
deleted file mode 100644
index f1499d017..000000000
--- a/mdk-stage1/dietlibc/lib/open64.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <linux/types.h>
-#include <linux/fcntl.h>
-
-#ifndef O_LARGEFILE
-#define O_LARGEFILE 0
-#endif
-
-extern int open(const char* file,int oflag,int mode);
-
-int __libc_open64(const char* file,int oflag,int mode) {
- return open(file,oflag|O_LARGEFILE,mode);
-}
-
-int open64(const char* file,int oflag,int mode) __attribute__((weak,alias("__libc_open64")));
diff --git a/mdk-stage1/dietlibc/lib/opendir.c b/mdk-stage1/dietlibc/lib/opendir.c
deleted file mode 100644
index 5c0c4a305..000000000
--- a/mdk-stage1/dietlibc/lib/opendir.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-#include <stdlib.h>
-#include <fcntl.h>
-
-DIR *opendir (const char *name) {
- DIR *t=(DIR*)malloc(sizeof(DIR));
- if (t) {
- if ((t->fd=open(name,O_RDONLY|O_DIRECTORY))>=0) {
- t->num=t->cur=0;
- } else {
- free(t);
- t=0;
- }
- }
- return t;
-}
diff --git a/mdk-stage1/dietlibc/lib/perror.c b/mdk-stage1/dietlibc/lib/perror.c
deleted file mode 100644
index ecab7250b..000000000
--- a/mdk-stage1/dietlibc/lib/perror.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include "dietfeatures.h"
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-
-extern char *sys_errlist[];
-extern int sys_nerr;
-extern int errno;
-
-void perror(const char *s) {
- register char *message="[unknown error]";
- write(2,s,strlen(s));
- write(2,": ",2);
- if (errno>=0 && errno<sys_nerr)
-#ifdef WANT_THREAD_SAFE
- message=sys_errlist[*__errno_location()];
-#else
- message=sys_errlist[errno];
-#endif
- write(2,message,strlen(message));
- write(2,"\n",1);
-}
diff --git a/mdk-stage1/dietlibc/lib/pread.c b/mdk-stage1/dietlibc/lib/pread.c
deleted file mode 100644
index b922aa93e..000000000
--- a/mdk-stage1/dietlibc/lib/pread.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <endian.h>
-#include <sys/types.h>
-
-extern size_t __pread(int fd, void *buf, size_t count, off_t a,off_t b);
-
-size_t __libc_pread(int fd, void *buf, size_t count, off_t offset) {
- return __pread(fd,buf,count,offset,0);
-}
-
-int pread(int fd, void *buf, size_t count, off_t offset) __attribute__((weak,alias("__libc_pread")));
diff --git a/mdk-stage1/dietlibc/lib/pread64.c b/mdk-stage1/dietlibc/lib/pread64.c
deleted file mode 100644
index e6ba4d103..000000000
--- a/mdk-stage1/dietlibc/lib/pread64.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <endian.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#ifndef __NO_STAT64
-extern size_t __pread(int fd, void *buf, size_t count, off_t a,off_t b);
-
-size_t __libc_pread64(int fd, void *buf, size_t count, off64_t offset) {
- return __pread(fd,buf,count,__LONG_LONG_PAIR (offset&0xffffffff,offset>>32));
-}
-
-int pread64(int fd, void *buf, size_t count, off_t offset) __attribute__((weak,alias("__libc_pread64")));
-#endif
diff --git a/mdk-stage1/dietlibc/lib/putenv.c b/mdk-stage1/dietlibc/lib/putenv.c
deleted file mode 100644
index 274b16b0e..000000000
--- a/mdk-stage1/dietlibc/lib/putenv.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <stdlib.h>
-#include <string.h>
-
-int putenv(const char *string) {
- int len;
- int envc;
- char *tmp;
- const char **ep;
- char **newenv;
- static char **origenv=0;
- if (!origenv) origenv=environ;
- if (!(tmp=strchr(string,'=')))
- len=strlen(string);
- else
- len=tmp-string+1;
- for (envc=0, ep=(const char**)environ; *ep; ++ep) {
- if (!memcmp(string,*ep,len)) { /* found */
- if (!tmp) {
- for (; ep[1]; ++ep) ep[0]=ep[1];
- ep[0]=0;
- return 0;
- }
- *ep=string;
- return 0;
- }
- ++envc;
- }
- if (tmp) {
- newenv=(char**)malloc((envc+2)*sizeof(char*));
- if (!newenv) return -1;
- newenv[0]=(char*)string;
- memcpy(newenv+1,environ,(envc+1)*sizeof(char*));
- if (environ!=origenv) free(environ);
- environ=newenv;
- }
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/puts.c b/mdk-stage1/dietlibc/lib/puts.c
deleted file mode 100644
index 54415151d..000000000
--- a/mdk-stage1/dietlibc/lib/puts.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <unistd.h>
-#include <string.h>
-#include "dietstdio.h"
-#include "dietfeatures.h"
-
-int puts(const char *s) {
-#ifdef WANT_BUFFERED_STDIO
- return fwrite(s,1,strlen(s),stdout) && fputc('\n',stdout);
-#else
- return write(1,s,strlen(s)) && write(1,"\n",1);
-#endif
-}
diff --git a/mdk-stage1/dietlibc/lib/qsort.c b/mdk-stage1/dietlibc/lib/qsort.c
deleted file mode 100644
index 2a8824bf3..000000000
--- a/mdk-stage1/dietlibc/lib/qsort.c
+++ /dev/null
@@ -1,125 +0,0 @@
-#include <stdlib.h>
-#include <assert.h>
-
-/* comments:
- 1. insertion sort sofort, nicht nachträglich
- 2. threshold = 16
- */
-
-static inline void iswap(void *a,void *b,size_t size) {
- register char *x=a;
- register char *y=b;
- register char *z=x+size;
- while (x<z) {
- register char tmp=*x;
- *x=*y;
- *y=tmp;
- ++x; ++y;
- }
-}
-
-static inline void swap(void *base,size_t size,size_t a,size_t b) {
- iswap(base+a*size,base+b*size,size);
-}
-
-#if 0
-extern int array[];
-
-void dumparray() {
- printf("array now {%d,%d,%d,%d,%d}\n",array[0],array[1],array[2],array[3],array[4]);
-}
-#endif
-
-void isort(void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) {
- int i;
- while (nmemb>1) {
- char *min=base;
- char *tmp=min+size;
- for (i=1; i<nmemb; ++i) {
- if (compar(tmp,min)<0)
- min=tmp;
- tmp+=size;
- }
- iswap(min,base,size);
- base+=size;
- nmemb-=1;
- }
-}
-
-void qsort(void *base, size_t nmemb, size_t size, int (*compar)(const void *, const void *)) {
-#ifdef DEBUG
- char *dbase=base;
- char *dmax=base+(nmemb-1)*size;
- char dmemb=nmemb;
-#endif
- static int level=0;
- char* v; /* pivot */
- char* mid, *max, *min;
- int lmemb;
-
-#if 0
- int left,right;
- left=(int*)base-array;
- right=left+nmemb-1;
- ++level;
- { int i; for (i=0; i<level; ++i) printf(" "); }
- printf("qsort: level %d; base=%p, %dx%d; array[%d..%d]\n",level,base,nmemb,size,left,right);
- assert(left>=0 && right<=1000);
-#endif
- if (nmemb<=8) {
- --level;
- return isort(base,nmemb,size,compar);
- }
- {
- mid=base+(nmemb/2)*size;
- max=base+(nmemb-1)*size;
-
- if (compar(base,max)<0) /* a[left] < a[right] */
- if (compar(base,mid)<0) /* a[left] < a[med] */
- if (compar(max,mid)<0) /* a[left] < a[right] < a[med] */
- v=max;
- else /* a[left] < a[med] < a[right] */
- v=mid;
- else /* a[med] < a[left] < a[right] */
- v=base;
- else /* a[right] < a[left] */
- if (compar(base,mid)<0) /* a[right] < a[left] < a[med] */
- v=base;
- else /* a[right] < a[left] && a[med] < a[left] */
- if (compar(max,mid)<0) /* a[right] < a[med] < a[left] */
- v=mid;
- else
- v=max;
-// printf("%d %d %d -> median %d\n",*(int*)base,*(int*)mid,*(int*)max,*(int*)v);
- }
- if (v != max)
- iswap(v,max,size);
- v=max;
- min=base; lmemb=0;
- for (;;) {
- while (compar(min,v)<0) { min+=size; ++lmemb; }
- while (compar(max-=size,v)>0) ;
- if (min>=max) break;
- iswap(min,max,size);
- }
- iswap(min,v,size);
-#ifdef DEBUG
-// { int i; for (i=0; i<level; ++i) printf(" "); }
-// printf("-=< base=%p, min=%p, nmemb=%d, lmemb=%d (%d)\n",base,min,nmemb,lmemb,(min-(char*)base)/size);
- assert(lmemb==((min-(char*)base)/size));
-#endif
- if (min>(char*)base+size) {
-#ifdef DEBUG
- assert(base==dbase);
-#endif
-// { int i; for (i=0; i<level; ++i) printf(" "); }
-// printf("+-left %d [%d..%d] of [%d..%d]\n",level+1,left,left+lmemb,left,right);
- qsort(base,lmemb,size,compar);
- }
- if (nmemb>lmemb+1) {
-// { int i; for (i=0; i<level; ++i) printf(" "); }
-// printf("+-right %d [%d..%d] of [%d..%d]\n",level+1,left+lmemb,right,left,right);
- qsort(min+size,nmemb-lmemb-1,size,compar);
- }
- --level;
-}
diff --git a/mdk-stage1/dietlibc/lib/raise.c b/mdk-stage1/dietlibc/lib/raise.c
deleted file mode 100644
index 606546034..000000000
--- a/mdk-stage1/dietlibc/lib/raise.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include <unistd.h>
-#include <signal.h>
-#include "syscalls.h"
-
-int raise(int sig) {
- return kill(getpid(),sig);
-}
diff --git a/mdk-stage1/dietlibc/lib/rand.c b/mdk-stage1/dietlibc/lib/rand.c
deleted file mode 100644
index 10bfaf94d..000000000
--- a/mdk-stage1/dietlibc/lib/rand.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <stdlib.h>
-
-static unsigned int seed=1;
-
-int rand() {
- return ((seed = seed * 1103515245 + 12345) % ((unsigned int)RAND_MAX + 1));
-}
-
-void srand(unsigned int i) { seed=i; }
diff --git a/mdk-stage1/dietlibc/lib/random.c b/mdk-stage1/dietlibc/lib/random.c
deleted file mode 100644
index e7785c455..000000000
--- a/mdk-stage1/dietlibc/lib/random.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <stdlib.h>
-
-static unsigned int seed=1;
-
-long int random() {
- return ((seed = seed * 1103515245 + 12345) % ((unsigned int)RAND_MAX + 1));
-}
-
-void srandom(unsigned int i) { seed=i; }
diff --git a/mdk-stage1/dietlibc/lib/readdir.c b/mdk-stage1/dietlibc/lib/readdir.c
deleted file mode 100644
index 689f5d08b..000000000
--- a/mdk-stage1/dietlibc/lib/readdir.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-#include <stdlib.h>
-
-struct dirent* readdir(DIR *d) {
- if (!d->num || (d->cur += ((struct dirent*)(d->buf+d->cur))->d_reclen)>=d->num) {
- int res=getdents(d->fd,(struct dirent*)d->buf,1023);
- if (res<=0) return 0;
- d->num=res; d->cur=0;
- }
- return (struct dirent*)(d->buf+d->cur);
-}
diff --git a/mdk-stage1/dietlibc/lib/reboot.c b/mdk-stage1/dietlibc/lib/reboot.c
deleted file mode 100644
index 7f47a95dd..000000000
--- a/mdk-stage1/dietlibc/lib/reboot.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <sys/reboot.h>
-
-int __reboot(int magic1, int magic2, int cmd, void * arg);
-
-int reboot(int cmd, void *arg)
-{
- return __reboot(LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, cmd, arg);
-}
diff --git a/mdk-stage1/dietlibc/lib/recv.c b/mdk-stage1/dietlibc/lib/recv.c
deleted file mode 100644
index bc6b1e5d7..000000000
--- a/mdk-stage1/dietlibc/lib/recv.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_recv(int a, const void * b, size_t c, int flags) {
-#ifdef __i386__
- return socketcall(SYS_RECV,(long*)&a);
-#else
- unsigned long args[] = { a, (long) b, c, flags };
- return socketcall(SYS_RECV, args);
-#endif
-}
-
-int recv(int a, const void * b, size_t c, int flags)
- __attribute__ ((weak, alias("__libc_recv")));
diff --git a/mdk-stage1/dietlibc/lib/recvfrom.c b/mdk-stage1/dietlibc/lib/recvfrom.c
deleted file mode 100644
index 802ad665f..000000000
--- a/mdk-stage1/dietlibc/lib/recvfrom.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_recvfrom(int a, const void * b, size_t c, int flags, void *to, void *tolen) {
-#ifdef __i386__
- return socketcall(SYS_RECVFROM, (long*)&a);
-#else
- unsigned long args[] = { a, (long) b, c, flags, (long) to, (long) tolen };
- return socketcall(SYS_RECVFROM, args);
-#endif
-}
-
-int recvfrom(int a, const void * b, size_t c, int flags, void *to, void *tolen)
- __attribute__ ((weak,alias("__libc_recvfrom"))) ;
diff --git a/mdk-stage1/dietlibc/lib/recvmsg.c b/mdk-stage1/dietlibc/lib/recvmsg.c
deleted file mode 100644
index c14c58c78..000000000
--- a/mdk-stage1/dietlibc/lib/recvmsg.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_recvmsg(int a, struct msghdr* msg, int flags) {
-#ifdef __i386__
- return socketcall(SYS_RECVMSG, (long*)&a);
-#else
- unsigned long args[] = { a, (long) msg, flags };
- return socketcall(SYS_RECVMSG, args);
-#endif
-}
-
-int recvmsg(int a, struct msghdr *msg, int flags)
- __attribute__ ((weak,alias("__libc_recvmsg"))) ;
diff --git a/mdk-stage1/dietlibc/lib/remove.c b/mdk-stage1/dietlibc/lib/remove.c
deleted file mode 100644
index d5125bfed..000000000
--- a/mdk-stage1/dietlibc/lib/remove.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-int remove(const char* filename) {
- if (unlink(filename)) {
- if (errno==EISDIR)
- return rmdir(filename);
- return -1;
- }
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/rewind.c b/mdk-stage1/dietlibc/lib/rewind.c
deleted file mode 100644
index 48434a316..000000000
--- a/mdk-stage1/dietlibc/lib/rewind.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <dietstdio.h>
-#include <unistd.h>
-
-void rewind( FILE *stream) {
- fseek(stream, 0L, SEEK_SET);
-}
diff --git a/mdk-stage1/dietlibc/lib/rewinddir.c b/mdk-stage1/dietlibc/lib/rewinddir.c
deleted file mode 100644
index addc7bde9..000000000
--- a/mdk-stage1/dietlibc/lib/rewinddir.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-
-void rewinddir(DIR *d) {
- if (lseek(d->fd,0,SEEK_SET) != (off_t)-1)
- d->num=d->cur=0;
-}
diff --git a/mdk-stage1/dietlibc/lib/sbrk.c b/mdk-stage1/dietlibc/lib/sbrk.c
deleted file mode 100644
index 945ad5a16..000000000
--- a/mdk-stage1/dietlibc/lib/sbrk.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <unistd.h>
-
-extern int __brk(void *end_data_segment);
-
-extern void* __curbrk;
-
-void* __sbrk(ptrdiff_t increment) {
- void* oldbrk;
- if (__curbrk==0)
- if (__brk(0) < 0)
- return (void*)-1;
- if (increment==0)
- return __curbrk;
- oldbrk=__curbrk;
- if (__brk(oldbrk+increment)<0)
- return (void*)-1;
- return oldbrk;
-}
-
-void* sbrk (ptrdiff_t increment) __attribute__((weak,alias("__sbrk")));
diff --git a/mdk-stage1/dietlibc/lib/seekdir.c b/mdk-stage1/dietlibc/lib/seekdir.c
deleted file mode 100644
index cf111fbc8..000000000
--- a/mdk-stage1/dietlibc/lib/seekdir.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-
-void seekdir(DIR *d,off_t offset) {
- if (lseek(d->fd,offset,SEEK_SET) != (off_t)-1)
- d->num=d->cur=0;
-}
diff --git a/mdk-stage1/dietlibc/lib/semctl.c b/mdk-stage1/dietlibc/lib/semctl.c
deleted file mode 100644
index ddc0aae95..000000000
--- a/mdk-stage1/dietlibc/lib/semctl.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int semctl(int semid, int semnum, int cmd, union semun arg) {
- return __ipc(SEMCTL,semid,semnum,cmd,&arg);
-}
diff --git a/mdk-stage1/dietlibc/lib/semget.c b/mdk-stage1/dietlibc/lib/semget.c
deleted file mode 100644
index 056aeae04..000000000
--- a/mdk-stage1/dietlibc/lib/semget.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int semget(key_t key, int nsems, int semflg) {
- return __ipc(SEMGET,key,nsems,semflg,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/semop.c b/mdk-stage1/dietlibc/lib/semop.c
deleted file mode 100644
index abfde73a7..000000000
--- a/mdk-stage1/dietlibc/lib/semop.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/sem.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int semop(int semid,struct sembuf *sops,unsigned nsops) {
- return __ipc(SEMOP,semid,nsops,0,sops);
-}
diff --git a/mdk-stage1/dietlibc/lib/send.c b/mdk-stage1/dietlibc/lib/send.c
deleted file mode 100644
index c1adf1b5d..000000000
--- a/mdk-stage1/dietlibc/lib/send.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_send(int a, const void * b, size_t c, int flags) {
-#ifdef __i386__
- return socketcall(SYS_SEND, (long*)&a);
-#else
- unsigned long args[] = { a, (long) b, c, flags };
- return socketcall(SYS_SEND, args);
-#endif
-}
-
-int send(int a, const void * b, size_t c, int flags)
- __attribute__ ((weak, alias("__libc_send")));
diff --git a/mdk-stage1/dietlibc/lib/sendmsg.c b/mdk-stage1/dietlibc/lib/sendmsg.c
deleted file mode 100644
index 277265985..000000000
--- a/mdk-stage1/dietlibc/lib/sendmsg.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_sendmsg(int a, const struct msghdr* msg, int flags) {
-#ifdef __i386__
- return socketcall(SYS_SENDMSG, (long*)&a);
-#else
- unsigned long args[] = { a, (long) msg, flags };
- return socketcall(SYS_SENDMSG, args);
-#endif
-}
-
-int sendmsg(int a, const struct msghdr *msg, int flags)
- __attribute__ ((weak,alias("__libc_sendmsg"))) ;
diff --git a/mdk-stage1/dietlibc/lib/sendto.c b/mdk-stage1/dietlibc/lib/sendto.c
deleted file mode 100644
index 078c010ea..000000000
--- a/mdk-stage1/dietlibc/lib/sendto.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_sendto(int a, const void * b, size_t c, int flags, void *to, int tolen) {
-#ifdef __i386__
- return socketcall(SYS_SENDTO, (long*)&a);
-#else
- unsigned long args[] = { a, (long) b, c, flags, (long) to, tolen };
- return socketcall(SYS_SENDTO, args);
-#endif
-}
-
-int sendto(int a, const void * b, size_t c, int flags, void *to, int tolen)
- __attribute__ ((weak, alias("__libc_sendto")));
diff --git a/mdk-stage1/dietlibc/lib/set_errno.c b/mdk-stage1/dietlibc/lib/set_errno.c
deleted file mode 100644
index 6553bc496..000000000
--- a/mdk-stage1/dietlibc/lib/set_errno.c
+++ /dev/null
@@ -1,9 +0,0 @@
-extern int errno;
-
-void __set_errno(int error) __attribute__ ((weak));
-
-void __set_errno(int error)
-{
- errno=error;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/setpgrp.c b/mdk-stage1/dietlibc/lib/setpgrp.c
deleted file mode 100644
index 825ca3725..000000000
--- a/mdk-stage1/dietlibc/lib/setpgrp.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <unistd.h>
-
-int setpgrp()
-{
- return setpgid(0,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/setsockopt.c b/mdk-stage1/dietlibc/lib/setsockopt.c
deleted file mode 100644
index 781e9c31c..000000000
--- a/mdk-stage1/dietlibc/lib/setsockopt.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int setsockopt(int a, int b, int c, void *d, void *e) {
-#ifdef __i386__
- return socketcall(SYS_SETSOCKOPT, (long*)&a);
-#else
- unsigned long args[] = { a, b, c, (long)d, (long) e };
- return socketcall(SYS_SETSOCKOPT, args);
-#endif
-}
-
diff --git a/mdk-stage1/dietlibc/lib/shmat.c b/mdk-stage1/dietlibc/lib/shmat.c
deleted file mode 100644
index 63284b1ea..000000000
--- a/mdk-stage1/dietlibc/lib/shmat.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern void* __ipc();
-
-void* shmat(int shmid,const void* shmaddr,int shmflg) {
- void* raddr;
- register void* result;
- result=__ipc(SHMAT,shmid,shmflg,&raddr,shmaddr);
- if ((unsigned long)result <= -(unsigned long)SHMLBA)
- result=raddr;
- return result;
-}
diff --git a/mdk-stage1/dietlibc/lib/shmctl.c b/mdk-stage1/dietlibc/lib/shmctl.c
deleted file mode 100644
index 8f942f2a4..000000000
--- a/mdk-stage1/dietlibc/lib/shmctl.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int shmctl(int shmid, int cmd, struct shmid_ds *buf) {
- return __ipc(SHMCTL,shmid,cmd,0,buf);
-}
diff --git a/mdk-stage1/dietlibc/lib/shmdt.c b/mdk-stage1/dietlibc/lib/shmdt.c
deleted file mode 100644
index 36db10f08..000000000
--- a/mdk-stage1/dietlibc/lib/shmdt.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int shmdt(const void* shmaddr) {
- return __ipc(SHMDT,0,0,0,shmaddr);
-}
diff --git a/mdk-stage1/dietlibc/lib/shmget.c b/mdk-stage1/dietlibc/lib/shmget.c
deleted file mode 100644
index 9b03f5deb..000000000
--- a/mdk-stage1/dietlibc/lib/shmget.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern int __ipc();
-
-int shmget(key_t key, int size, int shmflg) {
- return __ipc(SHMGET,key,size,shmflg,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/shutdown.c b/mdk-stage1/dietlibc/lib/shutdown.c
deleted file mode 100644
index 0a6be6c37..000000000
--- a/mdk-stage1/dietlibc/lib/shutdown.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int __libc_shutdown(int s, int how) {
-#ifdef __i386__
- return socketcall(SYS_SHUTDOWN, (long*)&s);
-#else
- unsigned long args[] = { s, (long) how, 0 };
- return socketcall(SYS_SHUTDOWN, args);
-#endif
-}
-
-int shutdown(int s, int how) __attribute__((weak,alias("__libc_shutdown")));
diff --git a/mdk-stage1/dietlibc/lib/sigaddset.c b/mdk-stage1/dietlibc/lib/sigaddset.c
deleted file mode 100644
index 8ce69ea77..000000000
--- a/mdk-stage1/dietlibc/lib/sigaddset.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#define __KERNEL__
-#define sigaddset foobar
-#include <asm/signal.h>
-#undef sigaddset
-
-int __sigaddset(sigset_t *set, int signo) {
- unsigned long sig = signo - 1;
- if (_NSIG_WORDS == 1)
- set->sig[0] |= 1UL << sig;
- else
- set->sig[sig / _NSIG_BPW] |= 1UL << (sig % _NSIG_BPW);
- return 0;
-}
-
-int sigaddset (sigset_t *env, int signo) __attribute__((weak,alias("__sigaddset")));
diff --git a/mdk-stage1/dietlibc/lib/sigdelset.c b/mdk-stage1/dietlibc/lib/sigdelset.c
deleted file mode 100644
index 2c3385ea8..000000000
--- a/mdk-stage1/dietlibc/lib/sigdelset.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#define __KERNEL__
-#define sigdelset foobar
-#include <asm/signal.h>
-#undef sigdelset
-
-int __sigdelset(sigset_t *set, int signo) {
- unsigned long sig = signo - 1;
- if (_NSIG_WORDS == 1)
- set->sig[0] &= ~(1UL << sig);
- else
- set->sig[sig / _NSIG_BPW] &= ~(1UL << (sig % _NSIG_BPW));
- return 0;
-}
-
-int sigdelset (sigset_t *env, int signo) __attribute__((weak,alias("__sigdelset")));
diff --git a/mdk-stage1/dietlibc/lib/sigemptyset.c b/mdk-stage1/dietlibc/lib/sigemptyset.c
deleted file mode 100644
index f4532f96e..000000000
--- a/mdk-stage1/dietlibc/lib/sigemptyset.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#define __USE_EXTERN_INLINES 1
-#include <signal.h>
-#include <errno.h>
-#include <string.h>
-
-int sigemptyset(sigset_t *set) {
- if (set==NULL) {
- __set_errno(EINVAL);
- return -1;
- }
- memset(set,0,sizeof(*set));
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/sigfillset.c b/mdk-stage1/dietlibc/lib/sigfillset.c
deleted file mode 100644
index ddac6e391..000000000
--- a/mdk-stage1/dietlibc/lib/sigfillset.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#define __KERNEL__
-#include <asm/signal.h>
-
-int __sigfillset (sigset_t *set) {
- int i;
- for (i=0; i<_NSIG_WORDS; i++)
- set->sig[i]=~0;
- return 0;
-}
-
-int sigfillset(sigset_t *env) __attribute__((weak,alias("__sigfillset")));
diff --git a/mdk-stage1/dietlibc/lib/sigismember.c b/mdk-stage1/dietlibc/lib/sigismember.c
deleted file mode 100644
index 67a258884..000000000
--- a/mdk-stage1/dietlibc/lib/sigismember.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#define __USE_EXTERN_INLINES 1
-#include <signal.h>
-
-# define __sigmask(sig) \
- (((unsigned long int) 1) << (((sig) - 1) % (8 * sizeof (unsigned long int))))
-
-# define __sigword(sig) (((sig) - 1) / (8 * sizeof (unsigned long int)))
-
-# define _SIGSET_NWORDS (1024 / (8 * sizeof (unsigned long int)))
-typedef struct
- {
- unsigned long int __val[_SIGSET_NWORDS];
- } __sigset_t;
-
-int __sigismember(const __sigset_t *set, int signo) {
- unsigned long int __mask = __sigmask (signo);
- unsigned long int __word = __sigword (signo);
- return (set->__val[__word] & __mask);
-}
-
-int sigismember(const sigset_t *env, int signo) __attribute__((weak,alias("__sigismember")));
diff --git a/mdk-stage1/dietlibc/lib/sigjmp.c b/mdk-stage1/dietlibc/lib/sigjmp.c
deleted file mode 100644
index be97c62cc..000000000
--- a/mdk-stage1/dietlibc/lib/sigjmp.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-#include <setjmp.h>
-#include <signal.h>
-#include <string.h>
-
-/* This function is called by the `sigsetjmp' macro
- before doing a `__setjmp' on ENV[0].__jmpbuf.
- Always return zero. */
-
-int
-__sigjmp_save (sigjmp_buf env, int savemask)
-{
- env[0].__mask_was_saved = (savemask &&
- sigprocmask (SIG_BLOCK, (sigset_t *) NULL,
- (sigset_t*)&env[0].__saved_mask) == 0);
-
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/sleep.c b/mdk-stage1/dietlibc/lib/sleep.c
deleted file mode 100644
index ec5b99533..000000000
--- a/mdk-stage1/dietlibc/lib/sleep.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <linux/time.h>
-#include <time.h>
-
-unsigned int sleep(unsigned int secs) {
- struct timespec t;
- t.tv_sec=secs;
- t.tv_nsec=0;
- nanosleep(&t,&t);
- return secs-t.tv_sec;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/snprintf.c b/mdk-stage1/dietlibc/lib/snprintf.c
deleted file mode 100644
index 096c06115..000000000
--- a/mdk-stage1/dietlibc/lib/snprintf.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <stdarg.h>
-#include <sys/types.h>
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int snprintf(char *str,size_t size,const char *format,...)
-{
- int n;
- va_list arg_ptr;
- va_start(arg_ptr, format);
- n=vsnprintf(str,size,format,arg_ptr);
- va_end (arg_ptr);
- return n;
-}
diff --git a/mdk-stage1/dietlibc/lib/socket.c b/mdk-stage1/dietlibc/lib/socket.c
deleted file mode 100644
index 1684a6a2b..000000000
--- a/mdk-stage1/dietlibc/lib/socket.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <linux/net.h>
-
-extern int socketcall(int callno,long* args);
-
-int socket(int a, int b, int c) {
-#ifdef __i386__
- return socketcall(SYS_SOCKET, (long*)&a);
-#else
- unsigned long args[] = { a, b, c };
- return socketcall(SYS_SOCKET, args);
-#endif
-}
diff --git a/mdk-stage1/dietlibc/lib/speed.c b/mdk-stage1/dietlibc/lib/speed.c
deleted file mode 100644
index a7fcca7c9..000000000
--- a/mdk-stage1/dietlibc/lib/speed.c
+++ /dev/null
@@ -1,67 +0,0 @@
-#include <unistd.h>
-#include <termios.h>
-#include <sys/types.h>
-
-#include <asm/errno.h>
-
-extern int errno;
-
-/* Hack around a kernel bug; value must correspond to the one used in tcsetattr.c */
-#define IBAUD0 020000000000
-
-
-/* Return the output baud rate stored in *TERMIOS_P. */
-speed_t cfgetospeed (struct termios *termios_p)
-{
- return termios_p->c_cflag & (CBAUD | CBAUDEX);
-}
-
-
-/* Return the input baud rate stored in *TERMIOS_P.
- Although for Linux there is no difference between input and output
- speed, the numerical 0 is a special case for the input baud rate. It
- should set the input baud rate to the output baud rate. */
-speed_t cfgetispeed (struct termios *termios_p)
-{
- return ((termios_p->c_iflag & IBAUD0)
- ? 0 : termios_p->c_cflag & (CBAUD | CBAUDEX));
-}
-
-
-/* Set the output baud rate stored in *TERMIOS_P to SPEED. */
-int cfsetospeed (struct termios *termios_p, speed_t speed)
-{
- if ((speed & ~CBAUD) != 0 && (speed < B57600 || speed > B460800)) {
- errno = EINVAL;
- return -1;
- }
-
- termios_p->c_cflag &= ~(CBAUD | CBAUDEX);
- termios_p->c_cflag |= speed;
-
- return 0;
-}
-
-
-/* Set the input baud rate stored in *TERMIOS_P to SPEED.
- Although for Linux there is no difference between input and output
- speed, the numerical 0 is a special case for the input baud rate. It
- should set the input baud rate to the output baud rate. */
-int cfsetispeed (struct termios *termios_p, speed_t speed)
-{
- if ((speed & ~CBAUD) != 0 && (speed < B57600 || speed > B460800)) {
- errno = EINVAL;
- return -1;
- }
-
- if (speed == 0)
- termios_p->c_iflag |= IBAUD0;
- else
- {
- termios_p->c_iflag &= ~IBAUD0;
- termios_p->c_cflag &= ~(CBAUD | CBAUDEX);
- termios_p->c_cflag |= speed;
- }
-
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/sprintf.c b/mdk-stage1/dietlibc/lib/sprintf.c
deleted file mode 100644
index b355d01f9..000000000
--- a/mdk-stage1/dietlibc/lib/sprintf.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdlib.h>
-#include "dietwarning.h"
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int sprintf(char *dest,const char *format,...)
-{
- int n;
- va_list arg_ptr;
- va_start(arg_ptr, format);
- n=vsnprintf(dest,1000000,format,arg_ptr);
- va_end (arg_ptr);
- return n;
-}
-
-link_warning("sprintf","warning: Avoid sprintf; use snprintf. It is more secure and faster.")
diff --git a/mdk-stage1/dietlibc/lib/sscanf.c b/mdk-stage1/dietlibc/lib/sscanf.c
deleted file mode 100644
index 341e74bba..000000000
--- a/mdk-stage1/dietlibc/lib/sscanf.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <stdarg.h>
-
-int vsscanf(const char *str, const char *format, va_list arg_ptr);
-
-int sscanf(const char *str, const char *format, ...)
-{
- int n;
- va_list arg_ptr;
- va_start(arg_ptr, format);
- n=vsscanf(str,format,arg_ptr);
- va_end (arg_ptr);
- return n;
-}
diff --git a/mdk-stage1/dietlibc/lib/strcasecmp.c b/mdk-stage1/dietlibc/lib/strcasecmp.c
deleted file mode 100644
index d978488a4..000000000
--- a/mdk-stage1/dietlibc/lib/strcasecmp.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <ctype.h>
-#include "dietfeatures.h"
-
-int strcasecmp(register const char *s,register const char *t) {
- register char x;
-
- for (;;) {
- x = tolower(*s); if (x != tolower(*t)) break; if (!x) break; ++s; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
- x = tolower(*s); if (x != tolower(*t)) break; if (!x) break; ++s; ++t;
- x = tolower(*s); if (x != tolower(*t)) break; if (!x) break; ++s; ++t;
- x = tolower(*s); if (x != tolower(*t)) break; if (!x) break; ++s; ++t;
-#endif
- }
- return ((int)(unsigned int)(unsigned char) x)
- - ((int)(unsigned int)(unsigned char) *t);
-}
diff --git a/mdk-stage1/dietlibc/lib/strcat.c b/mdk-stage1/dietlibc/lib/strcat.c
deleted file mode 100644
index 8a755afea..000000000
--- a/mdk-stage1/dietlibc/lib/strcat.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include "dietfeatures.h"
-#include <string.h>
-
-char* strcat(register char* s,register const char* t)
-{
- char *dest=s;
- s+=strlen(s);
- for (;;) {
- if (!(*s = *t)) break; ++s; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
- if (!(*s = *t)) break; ++s; ++t;
- if (!(*s = *t)) break; ++s; ++t;
- if (!(*s = *t)) break; ++s; ++t;
-#endif
- }
- return dest;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/strchr.c b/mdk-stage1/dietlibc/lib/strchr.c
deleted file mode 100644
index 0c2050da6..000000000
--- a/mdk-stage1/dietlibc/lib/strchr.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include "dietfeatures.h"
-
-char *strchr(register const char *t, int c) {
- register char ch;
-
- ch = c;
- for (;;) {
- if (*t == ch) break; if (!*t) return 0; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
- if (*t == ch) break; if (!*t) return 0; ++t;
- if (*t == ch) break; if (!*t) return 0; ++t;
- if (*t == ch) break; if (!*t) return 0; ++t;
-#endif
- }
- return (char*)t;
-}
-
-char *index(char *t,int c) __attribute__((weak,alias("strchr")));
diff --git a/mdk-stage1/dietlibc/lib/strcmp.c b/mdk-stage1/dietlibc/lib/strcmp.c
deleted file mode 100644
index 0db324e66..000000000
--- a/mdk-stage1/dietlibc/lib/strcmp.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include "dietfeatures.h"
-
-int strcmp(register const char *s,register const char *t) {
- register char x;
-
- for (;;) {
- x = *s; if (x != *t) break; if (!x) break; ++s; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
- x = *s; if (x != *t) break; if (!x) break; ++s; ++t;
- x = *s; if (x != *t) break; if (!x) break; ++s; ++t;
- x = *s; if (x != *t) break; if (!x) break; ++s; ++t;
-#endif
- }
- return ((int)(unsigned int)(unsigned char) x)
- - ((int)(unsigned int)(unsigned char) *t);
-}
diff --git a/mdk-stage1/dietlibc/lib/strcpy.c b/mdk-stage1/dietlibc/lib/strcpy.c
deleted file mode 100644
index 49693c30d..000000000
--- a/mdk-stage1/dietlibc/lib/strcpy.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include "dietfeatures.h"
-
-char* strcpy(register char* s,register const char* t)
-{
- char *dest=s;
- for (;;) {
- if (!(*s = *t)) return dest; ++s; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
- if (!(*s = *t)) return dest; ++s; ++t;
- if (!(*s = *t)) return dest; ++s; ++t;
- if (!(*s = *t)) return dest; ++s; ++t;
-#endif
- }
-}
-
diff --git a/mdk-stage1/dietlibc/lib/strcspn.c b/mdk-stage1/dietlibc/lib/strcspn.c
deleted file mode 100644
index 37053c72c..000000000
--- a/mdk-stage1/dietlibc/lib/strcspn.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-size_t strcspn(const char *s, const char *reject)
-{
- size_t l=0;
- int a=1,i,al=strlen(reject);
-
- while((a)&&(*s))
- {
- for(i=0;(a)&&(i<al);i++)
- if (*s==reject[i]) a=0;
- if (a) l++;
- s++;
- }
- return l;
-}
diff --git a/mdk-stage1/dietlibc/lib/strdup.c b/mdk-stage1/dietlibc/lib/strdup.c
deleted file mode 100644
index 6a2ea5f95..000000000
--- a/mdk-stage1/dietlibc/lib/strdup.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <string.h>
-#include <stdlib.h>
-
-char *strdup(const char *s) {
- char *tmp=(char *)malloc(strlen(s)+1);
- if (!tmp) return 0;
- strcpy(tmp,s);
- return tmp;
-}
diff --git a/mdk-stage1/dietlibc/lib/strerror.c b/mdk-stage1/dietlibc/lib/strerror.c
deleted file mode 100644
index f15b86aae..000000000
--- a/mdk-stage1/dietlibc/lib/strerror.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <string.h>
-
-extern char *sys_errlist[];
-extern int sys_nerr;
-
-char *strerror(int errnum) {
- if (errnum>=0 && errnum<sys_nerr)
- return sys_errlist[errnum];
- return "[unknown error]";
-}
diff --git a/mdk-stage1/dietlibc/lib/strlcat.c b/mdk-stage1/dietlibc/lib/strlcat.c
deleted file mode 100644
index fd35ec8af..000000000
--- a/mdk-stage1/dietlibc/lib/strlcat.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* $OpenBSD: strlcat.c,v 1.2 1999/06/17 16:28:58 millert Exp $ */
-
-/*
- * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid = "$OpenBSD: strlcat.c,v 1.2 1999/06/17 16:28:58 millert Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <string.h>
-
-/*
- * Appends src to string dst of size siz (unlike strncat, siz is the
- * full size of dst, not space left). At most siz-1 characters
- * will be copied. Always NUL terminates (unless siz == 0).
- * Returns strlen(initial dst) + strlen(src); if retval >= siz,
- * truncation occurred.
- */
-size_t strlcat(dst, src, siz)
- char *dst;
- const char *src;
- size_t siz;
-{
- register char *d = dst;
- register const char *s = src;
- register size_t n = siz;
- size_t dlen;
-
- /* Find the end of dst and adjust bytes left but don't go past end */
- while (*d != '\0' && n-- != 0)
- d++;
- dlen = d - dst;
- n = siz - dlen;
-
- if (n == 0)
- return(dlen + strlen(s));
- while (*s != '\0') {
- if (n != 1) {
- *d++ = *s;
- n--;
- }
- s++;
- }
- *d = '\0';
-
- return(dlen + (s - src)); /* count does not include NUL */
-}
diff --git a/mdk-stage1/dietlibc/lib/strlcpy.3 b/mdk-stage1/dietlibc/lib/strlcpy.3
deleted file mode 100644
index e00af8d6b..000000000
--- a/mdk-stage1/dietlibc/lib/strlcpy.3
+++ /dev/null
@@ -1,169 +0,0 @@
-.\" $OpenBSD: strlcpy.3,v 1.10 2000/11/06 01:03:25 aaron Exp $
-.\"
-.\" Copyright (c) 1998, 2000 Todd C. Miller <Todd.Miller@courtesan.com>
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. The name of the author may not be used to endorse or promote products
-.\" derived from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
-.\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
-.\" AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-.\" THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-.\" EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-.\" PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-.\" OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-.\" WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-.\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-.\" ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.Dd June 22, 1998
-.Dt STRLCPY 3
-.Os
-.Sh NAME
-.Nm strlcpy ,
-.Nm strlcat
-.Nd size-bounded string copying and concatenation
-.Sh SYNOPSIS
-.Fd #include <string.h>
-.Ft size_t
-.Fn strlcpy "char *dst" "const char *src" "size_t size"
-.Ft size_t
-.Fn strlcat "char *dst" "const char *src" "size_t size"
-.Sh DESCRIPTION
-The
-.Fn strlcpy
-and
-.Fn strlcat
-functions copy and concatenate strings respectively.
-They are designed
-to be safer, more consistent, and less error prone replacements for
-.Xr strncpy 3
-and
-.Xr strncat 3 .
-Unlike those functions,
-.Fn strlcpy
-and
-.Fn strlcat
-take the full size of the buffer (not just the length) and guarantee to
-NUL-terminate the result (as long as
-.Fa size
-is larger than 0 or, in the case of
-.Fn strlcat ,
-as long as there is at least one byte free in
-.Fa dst ) .
-Note that you should include a byte for the NUL in
-.Fa size .
-Also note that
-.Fn strlcpy
-and
-.Fn strlcat
-only operate on true
-.Dq C
-strings.
-This means that for
-.Fn strlcpy
-.Fa src
-must be NUL-terminated and for
-.Fn strlcat
-both
-.Fa src
-and
-.Fa dst
-must be NUL-terminated.
-.Pp
-The
-.Fn strlcpy
-function copies up to
-.Fa size
-- 1 characters from the NUL-terminated string
-.Fa src
-to
-.Fa dst ,
-NUL-terminating the result.
-.Pp
-The
-.Fn strlcat
-function appends the NUL-terminated string
-.Fa src
-to the end of
-.Fa dst .
-It will append at most
-.Fa size
-- strlen(dst) - 1 bytes, NUL-terminating the result.
-.Sh RETURN VALUES
-The
-.Fn strlcpy
-and
-.Fn strlcat
-functions return the total length of the string they tried to create.
-For
-.Fn strlcpy
-that means the length of
-.Fa src .
-For
-.Fn strlcat
-that means the initial length of
-.Fa dst
-plus
-the length of
-.Fa src .
-While this may seem somewhat confusing it was done to make
-truncation detection simple.
-.Sh EXAMPLES
-The following code fragment illustrates the simple case:
-.Bd -literal -offset indent
-char *s, *p, buf[BUFSIZ];
-
-\&...
-
-(void)strlcpy(buf, s, sizeof(buf));
-(void)strlcat(buf, p, sizeof(buf));
-.Ed
-.Pp
-To detect truncation, perhaps while building a pathname, something
-like the following might be used:
-.Bd -literal -offset indent
-char *dir, *file, pname[MAXPATHLEN];
-
-\&...
-
-if (strlcpy(pname, dir, sizeof(pname)) >= sizeof(pname))
- goto toolong;
-if (strlcat(pname, file, sizeof(pname)) >= sizeof(pname))
- goto toolong;
-.Ed
-.Pp
-Since we know how many characters we copied the first time, we can
-speed things up a bit by using a copy instead of an append:
-.Bd -literal -offset indent
-char *dir, *file, pname[MAXPATHLEN];
-size_t n;
-
-\&...
-
-n = strlcpy(pname, dir, sizeof(pname));
-if (n >= sizeof(pname))
- goto toolong;
-if (strlcpy(pname + n, file, sizeof(pname) - n) >= sizeof(pname) - n)
- goto toolong;
-.Ed
-.Pp
-However, one may question the validity of such optimizations, as they
-defeat the whole purpose of
-.Fn strlcpy
-and
-.Fn strlcat .
-As a matter of fact, the first version of this manual page got it wrong.
-.Sh SEE ALSO
-.Xr snprintf 3 ,
-.Xr strncat 3 ,
-.Xr strncpy 3
diff --git a/mdk-stage1/dietlibc/lib/strlcpy.c b/mdk-stage1/dietlibc/lib/strlcpy.c
deleted file mode 100644
index b935b9527..000000000
--- a/mdk-stage1/dietlibc/lib/strlcpy.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* $OpenBSD: strlcpy.c,v 1.3 1999/04/24 01:17:37 millert Exp $ */
-
-/*
- * Copyright (c) 1998 Todd C. Miller <Todd.Miller@courtesan.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#if defined(LIBC_SCCS) && !defined(lint)
-static char *rcsid = "$OpenBSD: strlcpy.c,v 1.3 1999/04/24 01:17:37 millert Exp $";
-#endif /* LIBC_SCCS and not lint */
-
-#include <sys/types.h>
-#include <string.h>
-
-/*
- * Copy src to string dst of size siz. At most siz-1 characters
- * will be copied. Always NUL terminates (unless siz == 0).
- * Returns strlen(src); if retval >= siz, truncation occurred.
- */
-size_t strlcpy(dst, src, siz)
- char *dst;
- const char *src;
- size_t siz;
-{
- register char *d = dst;
- register const char *s = src;
- register size_t n = siz;
-
- /* Copy as many bytes as will fit */
- if (n != 0 && --n != 0) {
- do {
- if ((*d++ = *s++) == 0)
- break;
- } while (--n != 0);
- }
-
- /* Not enough room in dst, add NUL and traverse rest of src */
- if (n == 0) {
- if (siz != 0)
- *d = '\0'; /* NUL-terminate dst */
- while (*s++)
- ;
- }
-
- return(s - src - 1); /* count does not include NUL */
-}
diff --git a/mdk-stage1/dietlibc/lib/strlen.c b/mdk-stage1/dietlibc/lib/strlen.c
deleted file mode 100644
index 56c085dac..000000000
--- a/mdk-stage1/dietlibc/lib/strlen.c
+++ /dev/null
@@ -1,47 +0,0 @@
-#include <endian.h>
-#include "dietfeatures.h"
-#include <string.h>
-
-#ifdef WANT_SMALL_STRING_ROUTINES
-size_t strlen(const char *s) {
- register int i;
- if (!s) return 0;
- for (i=0; *s; ++s) ++i;
- return i;
-}
-#else
-static const unsigned long magic = 0x01010101;
-
-size_t strlen(const char *s)
-{
- const char *t = s;
- unsigned long word;
-
- if (!s) return 0;
-
- /* Byte compare up until word boundary */
- for (; ((unsigned long) t & 3); t++)
- if (!*t) return t - s;
-
- /* Word compare */
- do {
- word = *((unsigned long *) t); t += 4;
- word = (word - magic) &~ word;
- word &= (magic << 7);
- } while (word == 0);
-
-#if BYTE_ORDER == LITTLE_ENDIAN
- /* word & 0x80808080 == word */
- word = (word - 1) & (magic << 10);
- word += (word << 8) + (word << 16);
- t += word >> 26;
-#else
- if ((word & 0x80800000) == 0) {
- word <<= 16;
- t += 2;
- }
- if ((word & 0x80000000) == 0) t += 1;
-#endif
- return ((const char *) t) - 4 - s;
-}
-#endif
diff --git a/mdk-stage1/dietlibc/lib/strncasecmp.c b/mdk-stage1/dietlibc/lib/strncasecmp.c
deleted file mode 100644
index 8a5445e53..000000000
--- a/mdk-stage1/dietlibc/lib/strncasecmp.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <ctype.h>
-#include <sys/types.h>
-#include <string.h>
-
-int strncasecmp(const char *s, const char *t, size_t n) {
- register char x;
- register const char* u=s+n;
- for (;;) {
- x = tolower(*s); if (x!=tolower(*t)) break; if (!x) break; if (++s>=u) return 0; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
- x = tolower(*s); if (x!=tolower(*t)) break; if (!x) break; if (++s>=u) return 0; ++t;
- x = tolower(*s); if (x!=tolower(*t)) break; if (!x) break; if (++s>=u) return 0; ++t;
- x = tolower(*s); if (x!=tolower(*t)) break; if (!x) break; if (++s>=u) return 0; ++t;
-#endif
- }
- return ((int)(unsigned int)(unsigned char) x)
- - ((int)(unsigned int)(unsigned char) *t);
-}
diff --git a/mdk-stage1/dietlibc/lib/strncat.c b/mdk-stage1/dietlibc/lib/strncat.c
deleted file mode 100644
index a08e97916..000000000
--- a/mdk-stage1/dietlibc/lib/strncat.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include "dietfeatures.h"
-#include <string.h>
-
-#ifdef WANT_NON_COMPLIANT_STRNCAT
-/* this implementation is not standards compliant.
- * the standard says that strncat(dest,"foobar",3) should write 'f', 'o'
- * and 'o'. The programmer is then expected to overwrite the last byte
- * with '\0', which is often forgotten. This implementation makes sure
- * the last written bytes is always '\0'. */
-#endif
-
-char *strncat(char *s, const char *t, size_t n) {
- char *dest=s;
- register char *max;
- s+=strlen(s);
-#ifdef WANT_NON_COMPLIANT_STRNCAT
- max=s+n-1;
-#else
- max=s+n;
-#endif
- for (;;) {
- if (!(*s = *t)) break; if (++s==max) break; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
- if (!(*s = *t)) break; if (++s==max) break; ++t;
- if (!(*s = *t)) break; if (++s==max) break; ++t;
- if (!(*s = *t)) break; if (++s==max) break; ++t;
-#endif
- }
- *s=0;
- return dest;
-}
diff --git a/mdk-stage1/dietlibc/lib/strncmp.c b/mdk-stage1/dietlibc/lib/strncmp.c
deleted file mode 100644
index 7c08c0fa7..000000000
--- a/mdk-stage1/dietlibc/lib/strncmp.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-int strncmp(const char *s1, const char *s2, size_t n) {
- return memccmp(s1,s2,0,n);
-}
diff --git a/mdk-stage1/dietlibc/lib/strncpy.c b/mdk-stage1/dietlibc/lib/strncpy.c
deleted file mode 100644
index 531387b7f..000000000
--- a/mdk-stage1/dietlibc/lib/strncpy.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#define _POSIX_SOURCE
-#define _XOPEN_SOURCE
-#include <sys/types.h>
-#include <string.h>
-
-char *strncpy(char *dest, const char *src, size_t n)
-{
- memccpy(dest,src,0,n);
- return dest;
-}
diff --git a/mdk-stage1/dietlibc/lib/strpbrk.c b/mdk-stage1/dietlibc/lib/strpbrk.c
deleted file mode 100644
index e18fd2a2d..000000000
--- a/mdk-stage1/dietlibc/lib/strpbrk.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-char *strpbrk(const char *s, const char *accept) {
- register int i,l=strlen(accept);
- for (; *s; s++)
- for (i=0; i<l; i++)
- if (*s == accept[i])
- return (char*)s;
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/strrchr.c b/mdk-stage1/dietlibc/lib/strrchr.c
deleted file mode 100644
index 1abb655e2..000000000
--- a/mdk-stage1/dietlibc/lib/strrchr.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <string.h>
-#include "dietfeatures.h"
-
-char *strrchr(const char *t, int c) {
- register char ch;
- register const char *l=0;
-
- ch = c;
- for (;;) {
- if (*t == ch) l=t; if (!*t) return (char*)l; ++t;
-#ifndef WANT_SMALL_STRING_ROUTINES
- if (*t == ch) l=t; if (!*t) return (char*)l; ++t;
- if (*t == ch) l=t; if (!*t) return (char*)l; ++t;
- if (*t == ch) l=t; if (!*t) return (char*)l; ++t;
-#endif
- }
- return (char*)l;
-}
-
-char *rindex(const char *t,int c) __attribute__((weak,alias("strrchr")));
diff --git a/mdk-stage1/dietlibc/lib/strsep.c b/mdk-stage1/dietlibc/lib/strsep.c
deleted file mode 100644
index a1bf1872a..000000000
--- a/mdk-stage1/dietlibc/lib/strsep.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <string.h>
-
-char *strsep(char **stringp, const char *delim) {
- register char *tmp=*stringp;
- register char *tmp2=tmp;
- register const char *tmp3;
- for (tmp2=tmp; *tmp2; ++tmp2) {
- for (tmp3=delim; *tmp3; ++tmp3)
- if (*tmp2==*tmp3) { /* delimiter found */
- *tmp2=0;
- *stringp=tmp2+1;
- return tmp;
- }
- }
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/strspn.c b/mdk-stage1/dietlibc/lib/strspn.c
deleted file mode 100644
index 2b3a4c116..000000000
--- a/mdk-stage1/dietlibc/lib/strspn.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-size_t strspn(const char *s, const char *accept)
-{
- size_t l=0;
- int a=1,i,al=strlen(accept);
-
- while((a)&&(*s))
- {
- for(a=i=0;(!a)&&(i<al);i++)
- if (*s==accept[i]) a=1;
- if (a) l++;
- s++;
- }
- return l;
-}
diff --git a/mdk-stage1/dietlibc/lib/strstr.c b/mdk-stage1/dietlibc/lib/strstr.c
deleted file mode 100644
index 641d9d7ac..000000000
--- a/mdk-stage1/dietlibc/lib/strstr.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <sys/types.h>
-#include <string.h>
-
-char *strstr(const char *haystack, const char *needle) {
- int nl=strlen(needle);
- int hl=strlen(haystack);
- int i;
- if (nl>hl) return 0;
- for (i=hl-nl+1; i; --i) {
- if (!memcmp(haystack,needle,nl))
- return (char*)haystack;
- ++haystack;
- }
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/lib/strtod.c b/mdk-stage1/dietlibc/lib/strtod.c
deleted file mode 100644
index cbe983d84..000000000
--- a/mdk-stage1/dietlibc/lib/strtod.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include <string.h>
-
-extern char isspace(char c);
-
-#ifdef __GNUC__
-static inline char isdigit(char c) { return (c>='0' && c<='9'); }
-#endif
-
-double strtod(const char *nptr, char **endptr) {
- double d=0;
- register const char *c=nptr;
- char neg=0;
- while (*c && isspace(*c)) ++c;
- switch (*c) {
- case '-': neg=1;
- case '+': c++; break;
- default: break;
- }
- while (isdigit(*c)) {
- d=d*10+(*c-'0');
- ++c;
- }
- if (*c=='.') {
- double factor=.1;
- while (isdigit(*++c)) {
- d=d+(factor*(*c-'0'));
- factor/=10;
- }
- }
- if ((*c|32)=='e') {
- int exp=0;
- double factor=10;
- if (c[1]<'0') {
- switch (c[1]) {
- case '-': factor=0.1;
- case '+': c++; break;
- default:
- d=0;
- c=nptr;
- goto done;
- }
- }
- while (isdigit(*++c))
- exp=exp*10+(*c-'0');
- while (exp) { /* XXX: this introduces rounding errors */
- d*=factor; --exp;
- }
- }
-done:
- if (endptr) *endptr=(char*)c;
- return d;
-}
diff --git a/mdk-stage1/dietlibc/lib/strtok.c b/mdk-stage1/dietlibc/lib/strtok.c
deleted file mode 100644
index 86337da7b..000000000
--- a/mdk-stage1/dietlibc/lib/strtok.c
+++ /dev/null
@@ -1,8 +0,0 @@
-char *strtok_r(char *s, const char *delim, char **ptrptr);
-
-static char *strtok_pos;
-
-char *strtok(char *s, const char *delim)
-{
- return strtok_r(s,delim,&strtok_pos);
-}
diff --git a/mdk-stage1/dietlibc/lib/strtok_r.c b/mdk-stage1/dietlibc/lib/strtok_r.c
deleted file mode 100644
index 93f9401de..000000000
--- a/mdk-stage1/dietlibc/lib/strtok_r.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <string.h>
-
-char *strtok_r(char *s, const char *delim, char **ptrptr)
-{
- int i;
- char *tmp=0;
-
- if (s) (*ptrptr)=s;
-
- if (**ptrptr)
- {
- while(!(i=strcspn(*ptrptr,delim))) (*ptrptr)++;
- if (**ptrptr)
- {
- tmp=(*ptrptr);
- (*ptrptr)+=i;
- if (**ptrptr) *(*ptrptr)++=0;
- }
- }
- return tmp;
-}
diff --git a/mdk-stage1/dietlibc/lib/strtol.c b/mdk-stage1/dietlibc/lib/strtol.c
deleted file mode 100644
index ead89f408..000000000
--- a/mdk-stage1/dietlibc/lib/strtol.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <ctype.h>
-
-extern unsigned long int strtoul(const char *nptr, char **endptr, int base);
-
-long int strtol(const char *nptr, char **endptr, int base)
-{
- int neg=0;
- unsigned long int v;
-
- while(isspace(*nptr)) nptr++;
-
- if (*nptr == '-' && isdigit(nptr[1])) { neg=-1; nptr++; }
- v=strtoul(nptr,endptr,base);
- return (neg?-v:v);
-}
diff --git a/mdk-stage1/dietlibc/lib/strtoll.c b/mdk-stage1/dietlibc/lib/strtoll.c
deleted file mode 100644
index 7b8e28a1d..000000000
--- a/mdk-stage1/dietlibc/lib/strtoll.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <ctype.h>
-
-extern unsigned long int strtoull(const char *nptr, char **endptr, int base);
-
-long int strtoll(const char *nptr, char **endptr, int base)
-{
- int neg=0;
- unsigned long long int v;
-
- while(isspace(*nptr)) nptr++;
-
- if (*nptr == '-' && isdigit(nptr[1])) { neg=-1; nptr++; }
- v=strtoull(nptr,endptr,base);
- return (neg?-v:v);
-}
diff --git a/mdk-stage1/dietlibc/lib/strtoul.c b/mdk-stage1/dietlibc/lib/strtoul.c
deleted file mode 100644
index 3f93962a9..000000000
--- a/mdk-stage1/dietlibc/lib/strtoul.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <ctype.h>
-
-/* static char *num="0123456789abcdefghijklmnopqrstuvwxyz"; */
-
-unsigned long int strtoul(const char *nptr, char **endptr, int base)
-{
- long int v=0;
-
- while(isspace(*nptr)) ++nptr;
-
- if (*nptr == '+') ++nptr;
- if (!base) {
- if (*nptr=='0') {
- base=8;
- if ((*(nptr+1)=='x')||(*(nptr+1)=='X')) {
- nptr+=2;
- base=16;
- }
- }
- else
- base=10;
- }
- while(*nptr) {
- register unsigned char c=*nptr;
- c=(c>='a'?c-'a'+10:c>='A'?c-'A'+10:c-'0');
- if (c>=base) break;
- v=v*base+c;
- ++nptr;
- }
- if (endptr) *endptr=(char *)nptr;
- return v;
-}
diff --git a/mdk-stage1/dietlibc/lib/strtoull.c b/mdk-stage1/dietlibc/lib/strtoull.c
deleted file mode 100644
index 40818958d..000000000
--- a/mdk-stage1/dietlibc/lib/strtoull.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <ctype.h>
-
-unsigned long long int strtoull(const char *nptr, char **endptr, int base)
-{
- long long int v=0;
-
- while(isspace(*nptr)) ++nptr;
-
- if (*nptr == '+') ++nptr;
- if (!base) {
- if (*nptr=='0') {
- base=8;
- if ((*(nptr+1)=='x')||(*(nptr+1)=='X')) {
- nptr+=2;
- base=16;
- }
- }
- else
- base=10;
- }
- while(*nptr) {
- register unsigned char c=*nptr;
- c=(c>='a'?c-'a'+10:c>='A'?c-'A'+10:c-'0');
- if (c>=base) break;
- v=v*base+c;
- ++nptr;
- }
- if (endptr) *endptr=(char *)nptr;
- return v;
-}
diff --git a/mdk-stage1/dietlibc/lib/sys_siglist.c b/mdk-stage1/dietlibc/lib/sys_siglist.c
deleted file mode 100644
index 80d7b3fb0..000000000
--- a/mdk-stage1/dietlibc/lib/sys_siglist.c
+++ /dev/null
@@ -1,37 +0,0 @@
-const char *const sys_siglist[] =
- {
- "Signal 0",
- "Hangup",
- "Interrupt",
- "Quit",
- "Illegal instruction",
- "Trace/breakpoint trap",
- "IOT trap",
- "EMT trap",
- "Floating point exception",
- "Killed",
- "Bus error",
- "Segmentation fault",
- "Bad system call",
- "Broken pipe",
- "Alarm clock",
- "Terminated",
- "Urgent I/O condition",
- "Stopped (signal)",
- "Stopped",
- "Continued",
- "Child exited",
- "Stopped (tty input)",
- "Stopped (tty output)",
- "I/O possible",
- "CPU time limit exceeded",
- "File size limit exceeded",
- "Virtual timer expired",
- "Profiling timer expired",
- "Window changed",
- "Resource lost",
- "User defined signal 1",
- "User defined signal 2",
- 0
- };
-
diff --git a/mdk-stage1/dietlibc/lib/tcdrain.c b/mdk-stage1/dietlibc/lib/tcdrain.c
deleted file mode 100644
index 7a760f643..000000000
--- a/mdk-stage1/dietlibc/lib/tcdrain.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <sys/ioctl.h>
-
-int __libc_tcdrain(int fd)
-{
- return ioctl(fd, TCSBRK, 1);
-}
-
-int tcdrain(int fd) __attribute__((weak,alias("__libc_tcdrain")));
diff --git a/mdk-stage1/dietlibc/lib/tcflush.c b/mdk-stage1/dietlibc/lib/tcflush.c
deleted file mode 100644
index a19fe11d1..000000000
--- a/mdk-stage1/dietlibc/lib/tcflush.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <termios.h>
-#include <sys/ioctl.h>
-
-#include <asm/errno.h>
-
-extern int errno;
-
-/* Flush pending data on FD. */
-int tcflush(int fd, int queue_selector)
-{
- switch (queue_selector) {
- case TCIFLUSH:
- return ioctl(fd, TCFLSH, 0);
- case TCOFLUSH:
- return ioctl(fd, TCFLSH, 1);
- case TCIOFLUSH:
- return ioctl(fd, TCFLSH, 2);
- default:
- errno = EINVAL;
- return -1;
- }
-}
diff --git a/mdk-stage1/dietlibc/lib/tcgetattr.c b/mdk-stage1/dietlibc/lib/tcgetattr.c
deleted file mode 100644
index f35d39442..000000000
--- a/mdk-stage1/dietlibc/lib/tcgetattr.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <termios.h>
-#include <sys/ioctl.h>
-
-int tcgetattr(int fildes, struct termios *termios_p)
-{
- return ioctl(fildes, TCGETS, termios_p);
-}
diff --git a/mdk-stage1/dietlibc/lib/tcgetpgrp.c b/mdk-stage1/dietlibc/lib/tcgetpgrp.c
deleted file mode 100644
index f2a290651..000000000
--- a/mdk-stage1/dietlibc/lib/tcgetpgrp.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <termios.h>
-#include <sys/ioctl.h>
-
-int tcgetpgrp(int fildes)
-{
- return ioctl(fildes, TIOCGPGRP);
-}
diff --git a/mdk-stage1/dietlibc/lib/tcsetattr.c b/mdk-stage1/dietlibc/lib/tcsetattr.c
deleted file mode 100644
index cf70354d2..000000000
--- a/mdk-stage1/dietlibc/lib/tcsetattr.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#define tcsetattr libc_tcsetattr
-#include <termios.h>
-#include <sys/ioctl.h>
-#undef tcsetattr
-
-#include <asm/errno.h>
-
-extern int errno;
-
-/* Hack around a kernel bug; value must correspond to the one used in speed.c */
-#define IBAUD0 020000000000
-
-int tcsetattr(int fildes, int optional_actions, struct termios *termios_p)
-{
- termios_p->c_iflag &= ~IBAUD0;
- switch (optional_actions) {
- case TCSANOW:
- return ioctl(fildes, TCSETS, termios_p);
- case TCSADRAIN:
- return ioctl(fildes, TCSETSW, termios_p);
- case TCSAFLUSH:
- return ioctl(fildes, TCSETSF, termios_p);
- default:
- errno = EINVAL;
- return -1;
- }
-}
diff --git a/mdk-stage1/dietlibc/lib/tcsetpgrp.c b/mdk-stage1/dietlibc/lib/tcsetpgrp.c
deleted file mode 100644
index 6c40b5c79..000000000
--- a/mdk-stage1/dietlibc/lib/tcsetpgrp.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <termios.h>
-#include <sys/ioctl.h>
-
-int tcsetpgrp(int fildes, pid_t pgrpid)
-{
- return ioctl(fildes, TIOCSPGRP, &pgrpid);
-}
diff --git a/mdk-stage1/dietlibc/lib/telldir.c b/mdk-stage1/dietlibc/lib/telldir.c
deleted file mode 100644
index 58be5d034..000000000
--- a/mdk-stage1/dietlibc/lib/telldir.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "dietdirent.h"
-#include <unistd.h>
-#include <dirent.h>
-
-off_t telldir(DIR *d) {
- return lseek(d->fd,0,SEEK_CUR)-d->num+d->cur;
-}
diff --git a/mdk-stage1/dietlibc/lib/tolower.c b/mdk-stage1/dietlibc/lib/tolower.c
deleted file mode 100644
index 4b7c7cf2d..000000000
--- a/mdk-stage1/dietlibc/lib/tolower.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <ctype.h>
-
-inline int tolower(int c) {
- return (c>='A' && c<='Z')?c-'A'+'a':c;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/toupper.c b/mdk-stage1/dietlibc/lib/toupper.c
deleted file mode 100644
index c048e60bb..000000000
--- a/mdk-stage1/dietlibc/lib/toupper.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <ctype.h>
-
-inline int toupper(int c) {
- return (c>='a' && c<='z')?c-'a'+'A':c;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/ttyname.c b/mdk-stage1/dietlibc/lib/ttyname.c
deleted file mode 100644
index a6b479088..000000000
--- a/mdk-stage1/dietlibc/lib/ttyname.c
+++ /dev/null
@@ -1,59 +0,0 @@
-#include "dietfeatures.h"
-#include <unistd.h>
-#include <sys/stat.h>
-
-#ifdef __linux__
-
-extern int __ltostr(char *s, int size, unsigned long i, int base, char UpCase);
-
-char *ttyname(int fd) {
-#ifdef SLASH_PROC_OK
- char ibuf[20];
- static char obuf[20];
- strcpy(ibuf,"/proc/self/fd/");
- ibuf[__ltostr(ibuf+14,6,fd,10,0)+14]=0;
- if (readlink(ibuf,obuf,sizeof(obuf)-1)<0) return 0;
- return obuf;
-#else
- static char buf[20]="/dev/tty";
- struct stat s;
- char *c=buf+8;
- int n;
- if (fstat(fd,&s)) return 0;
- if (S_ISCHR(s.st_mode)) {
- n=minor(s.st_rdev);
- switch (major(s.st_rdev)) {
- case 4:
- buf[5]='t'; buf[7]='y';
- if (n>63) {
- n-=64;
- *c='S';
- ++c;
- }
-num:
- c[__ltostr(c,6,n,10,0)]=0;
- break;
- case 2:
- buf[5]='p'; buf[7]='y';
- buf[8]='p'-(n>>4);
- buf[9]=n%4+'0';
- if (buf[9]>'9') *c+='a'-'0';
- buf[10]=0;
- case 136:
- case 137:
- case 138:
- case 139:
- buf[5]='p'; buf[7]='s';
- n+=(major(s.st_rdev)-136)<<8;
- *c='/'; ++c;
- goto num;
- default:
- return 0;
- }
- return buf;
- }
- return 0;
-#endif
-}
-
-#endif
diff --git a/mdk-stage1/dietlibc/lib/usleep.c b/mdk-stage1/dietlibc/lib/usleep.c
deleted file mode 100644
index 494f99233..000000000
--- a/mdk-stage1/dietlibc/lib/usleep.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <linux/time.h>
-#include <time.h>
-
-/* nano * 1000 == usecs
- * usecs * 1000 == msecs
- * msecs * 1000 = secs */
-void usleep(unsigned int usecs) {
- struct timespec t;
- t.tv_sec=usecs/1000000;
- t.tv_nsec=(usecs%1000000)*1000;
- nanosleep(&t,&t);
-}
diff --git a/mdk-stage1/dietlibc/lib/vfork.c b/mdk-stage1/dietlibc/lib/vfork.c
deleted file mode 100644
index 795cddb05..000000000
--- a/mdk-stage1/dietlibc/lib/vfork.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <linux/types.h>
-#include <unistd.h>
-
-pid_t vfork(void) {
- return fork();
-}
diff --git a/mdk-stage1/dietlibc/lib/vfprintf.c b/mdk-stage1/dietlibc/lib/vfprintf.c
deleted file mode 100644
index c33a2404b..000000000
--- a/mdk-stage1/dietlibc/lib/vfprintf.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include "dietstdarg.h"
-
-int vfprintf(FILE *fstream, const char *format, va_list ap)
-{
- char *tmp;
- va_list cp_ap;
- size_t n = 0;
-
- va_copy(cp_ap, ap);
- n=vsnprintf(0, 1000000, format, cp_ap);
- tmp=alloca(n+2);
- vsnprintf(tmp, n+1, format, ap);
- fwrite(tmp, n,1, fstream);
- return n;
-}
-
diff --git a/mdk-stage1/dietlibc/lib/vprintf.c b/mdk-stage1/dietlibc/lib/vprintf.c
deleted file mode 100644
index 46ecc47a4..000000000
--- a/mdk-stage1/dietlibc/lib/vprintf.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <unistd.h>
-#include <stdlib.h>
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int vprintf(const char *format, va_list ap)
-{
- char tmp[1000000];
- size_t n = vsnprintf(tmp, sizeof(tmp), format, ap);
- write(1, tmp, n);
- return n;
-}
diff --git a/mdk-stage1/dietlibc/lib/vsnprintf.c b/mdk-stage1/dietlibc/lib/vsnprintf.c
deleted file mode 100644
index f425066e3..000000000
--- a/mdk-stage1/dietlibc/lib/vsnprintf.c
+++ /dev/null
@@ -1,238 +0,0 @@
-#include "dietfeatures.h"
-#include <stdarg.h>
-#include <sys/types.h>
-#include <stdlib.h>
-#include <string.h>
-#include "dietwarning.h"
-
-extern int __ltostr(char *s, int size, unsigned long i, int base, char UpCase);
-extern int __dtostr(double d,char *buf,int maxlen,int prec);
-
-int vsnprintf (char *str, size_t size, const char *format, va_list arg_ptr)
-{
- size_t apos,i;
- char ch,buf[1024];
- char *pb;
- char flag_in_sign;
- char flag_hash,flag_zero,flag_left,flag_space,flag_sign,flag_dot,flag_long;
- long number,width,preci,buf_len,pad;
- char padwith;
-
- size--;
-
- apos=0;
- while (apos<size)
- {
- ch=*format++;
- switch (ch)
- {
- case '%':
- flag_hash=0;
- flag_zero=0;
- flag_left=0;
- flag_space=0;
- flag_sign=0;
- flag_dot=0;
- flag_in_sign=0;
- flag_long=0;
-
- width=0;
- padwith=' ';
-
-inn_vsnprintf:
- if (apos>=size) continue; /* ARGL !!! */
-
- ch=*format++;
- switch (ch)
- {
-/* Format end ?!? */
- case 0:
- return -1;
- break;
-
-/* Format flag chars */
- case '#':
- flag_hash=1;
- goto inn_vsnprintf;
-
- case 'l':
- ++flag_long;
- goto inn_vsnprintf;
-
- case '0':
- padwith='0';
- goto inn_vsnprintf;
-
- case '-':
- flag_left=1;
- goto inn_vsnprintf;
-
- case ' ':
- flag_space=1;
- goto inn_vsnprintf;
-
- case '+':
- flag_sign=1;
- goto inn_vsnprintf;
-
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- if(flag_dot) return -1;
- width=strtol(--format,&pb,10);
- format=pb;
- goto inn_vsnprintf;
-
- case '*':
- width=va_arg(arg_ptr,int);
- goto inn_vsnprintf;
-
- case '.':
- flag_dot=1;
- if (*format=='*') {
- preci=va_arg(arg_ptr,int);
- ++format;
- } else {
- preci=strtol(format,&pb,10);
- format=pb;
- }
- goto inn_vsnprintf;
-
-/* Format conversion chars */
- case 'c':
- ch=(char)va_arg(arg_ptr,int);
- case '%':
- if (str) str[apos]=ch; ++apos;
- break;
-
- case 's':
- pb=va_arg(arg_ptr,char *);
-#ifdef WANT_NULL_PRINTF
- if (!pb) pb="(null)";
-#endif
- buf_len=strlen(pb);
- if (flag_dot && buf_len>preci) buf_len=preci;
- if (buf_len>size-apos) buf_len=size-apos;
-
-print_out:
- if (str) {
- if (width && (!flag_left))
- {
- for (pad=width-buf_len; pad>0; --pad) str[apos++]=padwith;
- }
- for(i=0;i<buf_len;++i) { str[apos++]=pb[i]; } /* strncpy */
- if (width && (flag_left))
- {
- for (pad=width-buf_len; pad>0; --pad) str[apos++]=padwith;
- }
- } else {
- if (width) {
- apos+=width>buf_len?width:buf_len;
- } else {
- apos+=size>buf_len?buf_len:size;
- }
- }
-
- break;
-
- /* Numbers */
- case 'b':
- i=2;
- goto num_vsnprintf;
- case 'p':
- flag_hash=1;
- width=sizeof(void *)<<1;
- padwith='0';
- ch='x';
- case 'X':
- case 'x':
- i=16;
- if (flag_hash)
- {
- if (str) {
- str[apos++]='0';
- str[apos++]=ch;
- } else
- apos+=2;
- }
- goto num_vsnprintf;
- case 'd':
- case 'i':
- flag_in_sign=1;
- case 'u':
- i=10;
- goto num_vsnprintf;
- case 'o':
- i=8;
- if (flag_hash) { if (str) str[apos]='0'; ++apos; }
-
-num_vsnprintf:
- if (apos>=size) continue; /* ARGL !!! */
-
- if (flag_long)
- number=va_arg(arg_ptr,long);
- else
- number=va_arg(arg_ptr,int);
-
- if (flag_in_sign && (number<0))
- {
- number*=-1;
- flag_in_sign=2;
- }
-
- buf_len=__ltostr(buf+1,sizeof(buf)-1,(unsigned long) number,i,0);
- pb=buf+1;
-
- if (flag_in_sign==2)
- {
- *(--pb)='-';
- buf_len++;
- }
- else if ((flag_in_sign)&&(flag_sign || flag_space))
- {
- *(--pb)=(flag_sign)?'+':' ';
- buf_len++;
- }
- goto print_out;
-
-#ifdef WANT_FLOATING_POINT_IN_PRINTF
- case 'f':
- case 'g':
- {
- double d=va_arg(arg_ptr,double);
- buf_len=__dtostr(d,buf,sizeof(buf),width?width:6);
- if (flag_dot) {
- char *tmp;
- if ((tmp=strchr(buf,'.'))) {
- while (preci>-1 && *++tmp) --preci;
- *tmp=0;
- }
- }
- pb=buf;
- goto print_out;
- }
-#endif
- default:
- break;
- }
- break;
- case 0:
- if (str) str[apos]=0;
- return apos;
- default:
- if (str) str[apos]=ch; apos++;
- break;
- }
- }
- if (str) str[apos]=0;
- return apos;
-}
-
-link_warning("vsnprintf","warning: the printf functions add several kilobytes of bloat.")
-
diff --git a/mdk-stage1/dietlibc/lib/vsprintf.c b/mdk-stage1/dietlibc/lib/vsprintf.c
deleted file mode 100644
index 10ff04bd7..000000000
--- a/mdk-stage1/dietlibc/lib/vsprintf.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdlib.h>
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int vsprintf(char *dest,const char *format, va_list arg_ptr)
-{
- return vsnprintf(dest,1000000,format,arg_ptr);
-}
diff --git a/mdk-stage1/dietlibc/lib/vsscanf.c b/mdk-stage1/dietlibc/lib/vsscanf.c
deleted file mode 100644
index 1c4c9b787..000000000
--- a/mdk-stage1/dietlibc/lib/vsscanf.c
+++ /dev/null
@@ -1,304 +0,0 @@
-#include "dietfeatures.h"
-#include <stdarg.h>
-#include <sys/types.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-
-const char *skip_ws(const char *str)
-{
- while ((*str)&&(isspace(*str))) str++;
- return str;
-}
-
-extern double strtod(const char *s,char **f);
-
-int vsscanf(const char *str, const char *format, va_list arg_ptr)
-{
- int n=0,div;
- unsigned char ch;
-
- char flag_discard, flag_malloc, flag_half, flag_long, flag_longlong;
- char flag_width;
-
- unsigned long width;
-
- /* arg_ptr tmps */
-#ifdef WANT_FLOATING_POINT_IN_SCANF
- double d,*pd;
- float *pf;
-#endif
-
- long l=0,*pl;
- short *ph;
- int *pi;
- char *s;
-
- while ((*str)&&(*format))
- {
- const char *prevfmt=format;
- format=skip_ws(format);
- ch=*format++;
- if (!ch) continue;
-
- switch (ch)
- {
- case '%':
- div=0;
- flag_discard=0;
- flag_malloc=0;
- flag_half=0;
- flag_long=0;
- flag_longlong=0;
-
- flag_width=0;
- width=-1;
-
-inn_vsscanf:
- ch=*format++;
-
- switch (ch)
- {
- case 0:
- return 0;
-
- case '%':
- if (*(str++)!=ch) return n;
- break;
-
- /* flags */
- case '*':
- flag_discard=1;
- goto inn_vsscanf;
-
- case 'a':
- flag_malloc=1;
- goto inn_vsscanf;
-
- case 'h':
- flag_half=1;
- goto inn_vsscanf;
-
- case 'l':
- if (flag_long) flag_longlong=1;
- flag_long=1;
- goto inn_vsscanf;
-
- /* longlong ? NOT YET ! */
- case 'q':
- case 'L':
- flag_longlong=1;
- goto inn_vsscanf;
-
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9':
- width=strtol(format-1,&s,10);
- format=s;
- flag_width=1;
- goto inn_vsscanf;
-
- /* conversion */
-
- case 'n':
- while (width && *str)
- {
- *(s++)=*(str++);
- --width;
- l++;
- }
- if (!flag_discard)
- {
- pl=(long *)va_arg(arg_ptr,long*);
- *pl=l;
- ++n;
- }
- break;
-
- case 'p':
- case 'X':
- case 'x':
- div+=6;
- case 'd':
- div+=2;
- case 'o':
- div+=8;
- case 'u':
- case 'i':
- if (*(str=skip_ws(str)))
- {
- l=strtol(str,&s,div);
- if (str!=s)
- {
- if (!flag_discard)
- {
- if (flag_long)
- {
- pl=(long *)va_arg(arg_ptr,long*);
- *pl=l;
- }
- else if (flag_half)
- {
- ph=(short *)va_arg(arg_ptr,short*);
- *ph=l;
- }
- else
- {
- pi=(int *)va_arg(arg_ptr,int*);
- *pi=l;
- }
- ++n;
- }
- str=s;
- }
- else
- return n;
- }
- break;
-
-#ifdef WANT_FLOATING_POINT_IN_SCANF
- case 'e':
- case 'E':
- case 'f':
- case 'g':
- if (*(str=skip_ws(str)))
- {
- d=strtod(str,&s);
- if (str!=s)
- {
- if (!flag_discard)
- {
- if (flag_long)
- {
- pd=(double *)va_arg(arg_ptr,double*);
- *pd=d;
- }
- else
- {
- pf=(float *)va_arg(arg_ptr,float*);
- *pf=d;
- }
- ++n;
- }
- str=s;
- }
- else
- return n;
- }
- break;
-#endif
-
- case 'c':
- if (!flag_discard)
- {
- s=(char *)va_arg(arg_ptr,char*);
- ++n;
- }
- if (!flag_width) width=1;
- while (width && *str)
- {
- if (!flag_discard) *(s++)=*(str);
- ++str;
- --width;
- }
- break;
-
- case 's':
- if (!flag_discard)
- {
- s=(char *)va_arg(arg_ptr,char*);
- ++n;
- }
- if (*(str=skip_ws(str)))
- {
- while (width && (!isspace(*str)))
- {
- if (!flag_discard) *(s++)=*(str);
- if (!*str) break;
- ++str;
- --width;
- }
- *s=0;
- }
- break;
-
-#ifdef WANT_CHARACTER_CLASSES_IN_SCANF
- case '[':
- {
- char cset[256];
- int flag_not=0;
- int flag_dash=0;
- memset(cset,0,sizeof(cset));
- ch=*format++;
-
- /* first char specials */
- if (ch=='^')
- {
- flag_not=1;
- ch=*format++;
- }
- if ((ch=='-')||(ch==']'))
- {
- cset[ch]=1;
- ch=*format++;
- }
-
- /* almost all non special chars */
- for (;(*format) && (*format!=']');++format) {
- if (flag_dash)
- {
- register unsigned char tmp=*format;
- for (;ch<=tmp;++ch) cset[ch]=1;
- flag_dash=0;
- ch=*(++format);
- }
- else if (*format=='-') flag_dash=1;
- else
- {
- cset[ch]=1;
- ch=*format;
- }
- }
-
- /* last char specials */
- if (flag_dash) cset['-']=1;
- else cset[ch]=1;
-
- /* like %c or %s */
- if (!flag_discard)
- {
- s=(char *)va_arg(arg_ptr,char*);
- ++n;
- }
- while (width && (cset[(unsigned char)(*str)]-flag_not))
- {
- if (!flag_discard) *(s++)=*(str);
- if (!*str) break;
- ++str;
- --width;
- }
- }
- break;
-#endif
- }
- break;
-
- default:
- if (prevfmt<format) {
- while (prevfmt<format) {
- if (*str!=*prevfmt) return n;
- ++str; ++prevfmt;
- }
- } else
- if (*(str++)!=ch) return n;
- break;
- }
- }
- return n;
-}
diff --git a/mdk-stage1/dietlibc/lib/wait.c b/mdk-stage1/dietlibc/lib/wait.c
deleted file mode 100644
index 8459af18c..000000000
--- a/mdk-stage1/dietlibc/lib/wait.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <sys/types.h>
-#include <sys/wait.h>
-
-pid_t wait(int *status) {
- return waitpid(-1,status,0);
-}
diff --git a/mdk-stage1/dietlibc/lib/wait3.c b/mdk-stage1/dietlibc/lib/wait3.c
deleted file mode 100644
index 19e90740c..000000000
--- a/mdk-stage1/dietlibc/lib/wait3.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <sys/wait.h>
-
-int wait3(int* status,int opts,struct rusage* rusage) {
- return wait4(-1,status,opts,rusage);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/___div.c b/mdk-stage1/dietlibc/libcruft/___div.c
deleted file mode 100644
index d359dc47b..000000000
--- a/mdk-stage1/dietlibc/libcruft/___div.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include "dietwarning.h"
-#include <stdlib.h>
-
-div_t div(int numer, int denom) {
- div_t temp;
- temp.quot=numer/denom;
- temp.rem=numer%denom;
- return temp;
-}
-
-link_warning("div","warning: your code uses div(), which is completely superfluous!");
diff --git a/mdk-stage1/dietlibc/libcruft/dnscruft.c b/mdk-stage1/dietlibc/libcruft/dnscruft.c
deleted file mode 100644
index d7a0efa50..000000000
--- a/mdk-stage1/dietlibc/libcruft/dnscruft.c
+++ /dev/null
@@ -1,115 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <sys/socket.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <arpa/inet.h>
-#include <string.h>
-#include <ctype.h>
-#include <stdlib.h>
-
-int __dns_fd=-1;
-
-void __dns_make_fd() {
- int tmp;
- struct sockaddr_in si;
- if (__dns_fd>0) return;
- tmp=socket(PF_INET,SOCK_DGRAM,IPPROTO_UDP);
- if (tmp<0) {
- perror("__dns_make_fd!socket");
- return;
- }
- si.sin_family=AF_INET;
- si.sin_port=0;
- si.sin_addr.s_addr=INADDR_ANY;
- if (bind(tmp,(struct sockaddr*)&si,sizeof(si))) {
- perror("__dns_make_fd!bind");
- return;
- }
- __dns_fd=tmp;
-}
-
-int __dns_servers=0;
-struct sockaddr __dns_server_ips[8];
-
-int __dns_search=0;
-char *__dns_domains[8];
-
-void __dns_readstartfiles() {
- int fd;
- char *buf=alloca(4096);
- int len;
- if (__dns_servers>0) return;
- {
- struct sockaddr_in to;
- char *cacheip=getenv("DNSCACHEIP");
- if (cacheip) {
- to.sin_port=htons(53);
- to.sin_family=AF_INET;
- if (inet_aton(cacheip,&to.sin_addr)) {
- memmove(__dns_server_ips,&to,sizeof(struct sockaddr));
- ++__dns_servers;
- }
- }
- }
- if ((fd=open("/etc/resolv.conf",O_RDONLY))<0) return;
- len=read(fd,buf,4096);
- close(fd);
- {
- char *last=buf+len;
- for (; buf<last;) {
- if (!strncmp(buf,"nameserver",10)) {
- buf+=10;
- while (buf<last && *buf!='\n') {
- while (buf<last && isblank(*buf)) ++buf;
- {
- char *tmp=buf;
- struct sockaddr_in i;
- while (buf<last && !isspace(*buf)) ++buf;
- if (buf>=last) break;
- *buf=0;
- if (inet_aton(tmp,&i.sin_addr)) {
- i.sin_family=AF_INET;
- i.sin_port=htons(53);
- memmove(&__dns_server_ips[__dns_servers],&i,sizeof(struct sockaddr));
- if (__dns_servers<8) ++__dns_servers;
- }
- }
- }
- }
- if (!strncmp(buf,"search",6) || !strncmp(buf,"domain",6)) {
- buf+=6;
- }
- while (buf<last && *buf!='\n') ++buf;
- while (buf<last && *buf=='\n') ++buf;
- }
- }
-}
-
-/* return length of decoded data or -1 */
-int __dns_decodename(unsigned char *packet,int offset,unsigned char *dest,int maxlen) {
- unsigned char *tmp;
- unsigned char *max=dest+maxlen;
- unsigned char *after=packet+offset;
- int ok=0;
- for (tmp=after; maxlen>0&&*tmp; ) {
- if ((*tmp>>6)==3) { /* goofy DNS decompression */
- unsigned int ofs=((unsigned int)(*tmp&0x3f)<<8)|*(tmp+1);
- if (ofs>=offset) return -1; /* RFC1035: "pointer to a _prior_ occurrance" */
- if (after<tmp+2) after=tmp+2;
- tmp=packet+ofs;
- ok=0;
- } else {
- unsigned int duh;
- if (dest+*tmp+1>max) return -1;
- for (duh=*tmp; duh>0; --duh)
- *dest++=*++tmp;
- *dest++='.'; ok=1;
- ++tmp;
- if (tmp>after) { after=tmp; if (!*tmp) ++after; }
- }
- }
- if (ok) --dest;
- *dest=0;
- return after-packet;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/dnscruft2.c b/mdk-stage1/dietlibc/libcruft/dnscruft2.c
deleted file mode 100644
index b59207072..000000000
--- a/mdk-stage1/dietlibc/libcruft/dnscruft2.c
+++ /dev/null
@@ -1,185 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <stdio.h>
-
-extern int h_errno;
-
-static char dnspacket[]="\xfe\xfe\001\000\000\001\000\000\000\000\000\000";
-
-extern void __dns_make_fd();
-extern int __dns_fd;
-
-extern int __dns_servers;
-extern struct sockaddr __dns_server_ips[];
-
-extern void __dns_readstartfiles();
-
-extern int __dns_decodename(unsigned char *packet,int offset,unsigned char *dest,int maxlen);
-
-/* Oh boy, this interface sucks so badly, there are no words for it.
- * Not one, not two, but _three_ error signalling methods! (*h_errnop
- * nonzero? return value nonzero? *RESULT zero?) The glibc goons
- * really outdid themselves with this one. */
-int __dns_gethostbyx_r(const char* name, struct hostent* result,
- char *buf, size_t buflen,
- struct hostent **RESULT, int *h_errnop, int lookfor) {
- int names,ips;
- unsigned char *cur;
- unsigned char *max;
- unsigned char packet[512];
- __dns_make_fd();
-
- if (lookfor==1) {
- result->h_aliases=(char**)(buf+8*4);
- result->h_addrtype=AF_INET;
- result->h_length=4;
- result->h_addr_list=(char**)buf;
- } else {
- result->h_aliases=(char**)(buf+8*16);
- result->h_addrtype=AF_INET6;
- result->h_length=16;
- result->h_addr_list=(char**)buf;
- }
- result->h_aliases[0]=0;
-
- cur=buf+16*sizeof(char*);
- max=buf+buflen;
- names=ips=0;
-
- memmove(packet,dnspacket,12);
- *(unsigned short*)packet=rand();
- {
- unsigned char* x;
- const char* y,* tmp;
- x=packet+12; y=name;
- while (*y) {
- while (*y=='.') ++y;
- for (tmp=y; *tmp && *tmp!='.'; ++tmp) ;
- *x=tmp-y;
- if (!(tmp-y)) break;
- ++x;
- if (x>=packet+510-(tmp-y)) { *h_errnop=ERANGE; return 1; }
- memmove(x,y,tmp-y);
- x+=tmp-y;
- if (!*tmp) {
- *x=0;
- break;
- }
- y=tmp;
- }
- *++x= 0; *++x= lookfor; /* A */
- *++x= 0; *++x= 1; /* IN */
- ++x;
- {
- int i; /* current server */
- int j; /* timeout count down */
- struct pollfd duh;
- i=0; j=30;
- __dns_readstartfiles();
- duh.fd=__dns_fd;
- duh.events=POLLIN;
- for (j=30; j>0; --j) {
- sendto(__dns_fd,packet,x-packet,0,(struct sockaddr*)&(__dns_server_ips[i]),sizeof(struct sockaddr));
- if (++i > __dns_servers) i=0;
- if (poll(&duh,1,1) == 1) {
- /* read and parse answer */
- unsigned char inpkg[1500];
- /*int len=*/ read(__dns_fd,inpkg,1500);
-#if 0
- {
- int tft=open("duh",0);
- read(tft,inpkg,1500);
- close(tft);
- }
-#endif
- /* header, question, answer, authority, additional */
- if (inpkg[0]!=packet[0] || inpkg[1]!=packet[1]) continue; /* wrong ID */
- if ((inpkg[2]&0xf9) != 0x81) continue; /* not answer */
- if ((inpkg[3]&0x0f) != 0) break; /* error */
- tmp=inpkg+12;
- {
- char name[257];
- unsigned short q=((unsigned short)inpkg[4]<<8)+inpkg[5];
- while (q>0) {
- while (*tmp) tmp+=*tmp+1;
- tmp+=5;
- --q;
- }
- q=((unsigned short)inpkg[6]<<8)+inpkg[7];
- if (q<1) break;
- while (q>0) {
- int decofs=__dns_decodename(inpkg,tmp-(char*)inpkg,name,256);
- if (decofs<0) break;
- tmp=inpkg+decofs;
- --q;
- if (tmp[0]!=0 || tmp[1]!=lookfor || /* TYPE != A */
- tmp[2]!=0 || tmp[3]!=1) { /* CLASS != IN */
- if (tmp[1]==5) { /* CNAME */
- tmp+=10;
- decofs=__dns_decodename(inpkg,tmp-(char*)inpkg,name,256);
- if (decofs<0) break;
- tmp=inpkg+decofs;
- } else
- break;
- continue;
- }
- tmp+=10; /* skip type, class, TTL and length */
- {
- int slen;
- if (lookfor==1 || lookfor==28) /* A or AAAA*/ {
- slen=strlen(name);
- if (cur+slen+8+(lookfor==28?12:0)>=max) { *h_errnop=NO_RECOVERY; return 1; }
- } else if (lookfor==12) /* PTR */ {
- decofs=__dns_decodename(inpkg,tmp-(char*)inpkg,name,256);
- if (decofs<0) break;
- tmp=inpkg+decofs;
- slen=strlen(name);
- } else
- slen=strlen(name);
- strcpy(cur,name);
- if (names==0)
- result->h_name=cur;
- else
- result->h_aliases[names-1]=cur;
- result->h_aliases[names]=0;
- ++names;
-/* cur+=slen+1; */
- cur+=(slen|3)+1;
- result->h_addr_list[ips++] = cur;
- if (lookfor==1) /* A */ {
- *(int*)cur=*(int*)tmp;
- cur+=4;
- result->h_addr_list[ips]=0;
- } else if (lookfor==28) /* AAAA */ {
- {
- int i;
- for (i=0; i<16; ++i) cur[i]=tmp[i];
- }
- cur+=16;
- result->h_addr_list[ips]=0;
- }
- }
-/* puts(name); */
- }
- }
-/* printf("%d answers\n",((unsigned short)inpkg[6]<<8)+inpkg[7]);
- printf("ok\n");*/
- *h_errnop=0;
- *RESULT=result;
- return 0;
- }
-/*kaputt:*/
- }
- }
- }
- return 1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/entlib.c b/mdk-stage1/dietlibc/libcruft/entlib.c
deleted file mode 100644
index f88b3f057..000000000
--- a/mdk-stage1/dietlibc/libcruft/entlib.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * dietlibc/lib/entlib.c - Generic delimited-line parsing library
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-
-#include "entlib.h" /* this is our only include */
-
-
-/*
- * __ent_start
- *
- * Allocates and zeroes the module's state structure,
- * and open a handle to /etc/passwd.
- *
- * Returns -1 on failure and sets errno, or zero for success.
- */
-
-int __ent_start(const char *pathname, struct __ent_state **st_ref)
-{
- struct __ent_state *st;
-
- if (*st_ref)
- return 0;
-
- st = calloc(1, sizeof(*st));
- if (!st) {
- errno = ENOMEM;
- return -1;
- }
-
- st->fd = open(pathname, O_RDONLY);
- if (st->fd == -1) {
- /* errno should have been set by open(2) */
- free(st);
- st = NULL;
- return -1;
- }
-
- *st_ref = st;
- return 0;
-}
-
-
-/*
- * __ent_get_line
- *
- * Eliminates a previous line from the buffer, if any.
- * Then reads in a new line from /etc/passwd, if necessary.
- *
- * Returns -1 on failure, or zero for success.
- */
-
-int __ent_get_line(struct __ent_state *st)
-{
- int rc;
-
- /* overwrite previous line, by shifting the rest
- * of the rest to the front of the buffer
- */
- if (st->bufptr) {
- unsigned int slop = st->buflen - st->bufptr;
- memmove(st->ent_buf, &st->ent_buf[st->bufptr], slop);
- st->bufptr = 0;
- st->buflen = slop;
- st->ent_buf[st->buflen] = 0; /* null terminate */
- }
-
- if (st->buflen == __ENT_BUFSIZ || strchr(st->ent_buf, '\n'))
- return 0;
-
- rc = read(st->fd, &st->ent_buf[st->buflen], __ENT_BUFSIZ - st->buflen);
- if (rc < 0)
- return -1;
-
- st->buflen += rc;
- if (st->buflen == 0)
- return -1;
-
- return 0;
-}
-
-
-/*
- * __ent_split
- *
- * Splits a string into parts based on a delimiter.
- * Stops processing when \n is reached also.
- *
- * Returns -1 on failure, or zero on success.
- */
-
-int __ent_split(struct __ent_state *st, char **parts,
- int n_parts, int delimiter, int require_exact)
-{
- char *s = &st->ent_buf[st->bufptr];
- int idx = 0;
-
- /* empty list */
- if (!*s) {
- if (!require_exact)
- return 0;
- return -1;
- }
-
- /* scan through string, sticking string pointers
- * into parts[] as delimiters are found
- */
- parts[idx++] = s;
- while (*s) {
- st->bufptr++;
- if (*s == '\n') {
- *s = 0; /* null terminate */
- break;
- }
- if (*s == delimiter) {
- *s = 0; /* null terminate */
- /* boundary error: too many delimiters */
- if (idx == n_parts)
- return -1;
- s++;
- parts[idx++] = s;
- } else {
- s++;
- }
- }
-
- if (!require_exact)
- return 0;
- return (n_parts == idx) ? 0 : -1;
-}
-
-
-void __ent_set(struct __ent_state *st)
-{
- if (!st)
- return;
- st->buflen = st->bufptr = 0;
- lseek(st->fd, 0, SEEK_SET);
-}
-
-
-void __ent_end(struct __ent_state *st)
-{
- if (!st)
- return;
- close(st->fd);
- free(st);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/entlib.h b/mdk-stage1/dietlibc/libcruft/entlib.h
deleted file mode 100644
index 2659d542e..000000000
--- a/mdk-stage1/dietlibc/libcruft/entlib.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * dietlibc/lib/entlib.h - Generic delimited-line parsing library header
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-#ifndef __ENTLIB_H
-#define __ENTLIB_H
-
-#include <sys/types.h> /* for open(2), lseek(2) */
-#include <sys/stat.h> /* for open(2) */
-#include <fcntl.h> /* for open(2) */
-#include <unistd.h> /* for close(2), lseek(2) */
-#include <stdlib.h> /* for calloc(3), free(3) */
-#include <errno.h> /* for errno */
-#include <string.h> /* for memmove(3) */
-#include <stdlib.h> /* for atoi(3) */
-#include <paths.h> /* for the file locations */
-
-#include <pwd.h> /* for struct passwd */
-#include <grp.h> /* for struct group */
-#include <shadow.h> /* for struct spwd */
-
-/* should be a multiple of 64 to create decent alignment */
-#define __ENT_BUFSIZ (64 * 2)
-#define __ENT_RAW_BUFSIZ (__ENT_BUFSIZ + 2) /* some overlap required */
-
-struct __ent_state {
- char ent_buf[__ENT_RAW_BUFSIZ]; /* raw file data buffer */
- unsigned int buflen; /* amount of valid data in ent_buf */
- unsigned int bufptr; /* next valid position in ent_buf */
- int fd; /* /etc/passwd file descriptor */
-};
-
-extern int __ent_start(const char *pathname, struct __ent_state **st_ref);
-extern int __ent_get_line(struct __ent_state *st);
-extern int __ent_split(struct __ent_state *st, char **parts, int n_parts, int delimiter, int require_exact);
-extern void __ent_set(struct __ent_state *st);
-extern void __ent_end(struct __ent_state *st);
-
-#endif /* __ENTLIB_H */
diff --git a/mdk-stage1/dietlibc/libcruft/getdtablesize.c b/mdk-stage1/dietlibc/libcruft/getdtablesize.c
deleted file mode 100644
index 227354714..000000000
--- a/mdk-stage1/dietlibc/libcruft/getdtablesize.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <unistd.h>
-#include <limits.h>
-
-int getdtablesize(void) {
- return OPEN_MAX;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getgrgid.c b/mdk-stage1/dietlibc/libcruft/getgrgid.c
deleted file mode 100644
index 0c223056c..000000000
--- a/mdk-stage1/dietlibc/libcruft/getgrgid.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <grp.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct group *getgrgid(gid_t gid) {
- struct group *tmp;
- setgrent();
- for (;;) {
- tmp=getgrent();
- if (!tmp) return 0;
- if (tmp->gr_gid == gid)
- return tmp;
- }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getgrnam.c b/mdk-stage1/dietlibc/libcruft/getgrnam.c
deleted file mode 100644
index 1bdbb42a8..000000000
--- a/mdk-stage1/dietlibc/libcruft/getgrnam.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <grp.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct group *getgrnam(const char* name) {
- struct group *tmp;
- setgrent();
- for (;;) {
- tmp=getgrent();
- if (!tmp) return 0;
- if (!strcmp(tmp->gr_name,name))
- return tmp;
- }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyaddr.c b/mdk-stage1/dietlibc/libcruft/gethostbyaddr.c
deleted file mode 100644
index a4207d44d..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyaddr.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-extern int h_errno;
-
-struct hostent* gethostbyaddr(const void *addr, socklen_t len, int type) {
- static struct hostent hostbuf;
- struct hostent *hp;
- size_t hstbuflen;
- char *tmphstbuf;
- int res;
- int herr;
-
- hstbuflen = 1024;
- /* Allocate buffer, remember to free it to avoid a memory leakage. */
- tmphstbuf = malloc (hstbuflen);
-
- while ((res = gethostbyaddr_r (addr, len, type, &hostbuf, tmphstbuf, hstbuflen,
- &hp, &herr)) == ERANGE)
- {
- /* Enlarge the buffer. */
- hstbuflen *= 2;
- tmphstbuf = realloc (tmphstbuf, hstbuflen);
- }
- /* Check for errors. */
- if (res || hp == NULL)
- return NULL;
- return hp;
-}
-
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyaddr_r.c b/mdk-stage1/dietlibc/libcruft/gethostbyaddr_r.c
deleted file mode 100644
index 37174ab13..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyaddr_r.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <stdio.h>
-
-extern int __dns_gethostbyx_r(const char* name, struct hostent* result,
- char *buf, size_t buflen,
- struct hostent **RESULT, int *h_errnop, int lookfor);
-
-static int i2a(char* dest,unsigned int x) {
- register unsigned int tmp=x;
- register int len=0;
- if (x>=100) { *dest++=tmp/100+'0'; tmp=tmp%100; ++len; }
- if (x>=10) { *dest++=tmp/10+'0'; tmp=tmp%10; ++len; }
- *dest++=tmp+'0';
- return len+1;
-}
-
-/* Oh boy, this interface sucks so badly, there are no words for it.
- * Not one, not two, but _three_ error signalling methods! (*h_errnop
- * nonzero? return value nonzero? *RESULT zero?) The glibc goons
- * really outdid themselves with this one. */
-int gethostbyaddr_r(const char* addr, size_t length, int format,
- struct hostent* result, char *buf, size_t buflen,
- struct hostent **RESULT, int *h_errnop) {
- if (format==AF_INET) {
- char tmpbuf[50];
- char *tmp;
- int res;
- tmp=tmpbuf+i2a(tmpbuf,(unsigned char)addr[3]); *tmp++='.';
- tmp+=i2a(tmp,(unsigned char)addr[2]); *tmp++='.';
- tmp+=i2a(tmp,(unsigned char)addr[1]); *tmp++='.';
- tmp+=i2a(tmp,(unsigned char)addr[0]); strcpy(tmp,".in-addr.arpa");
- res= __dns_gethostbyx_r(tmpbuf,result,buf+4,buflen-4,RESULT,h_errnop,12); /* 12 == ns_t_ptr */
- if (res==0) {
- result->h_addr_list[0]=buf;
- result->h_addr_list[1]=buf;
- *(int*)buf=*(int*)addr;
- }
- return res;
- }
- return 1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyname.c b/mdk-stage1/dietlibc/libcruft/gethostbyname.c
deleted file mode 100644
index 5db5bf3c5..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyname.c
+++ /dev/null
@@ -1,39 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-extern int h_errno;
-
-struct hostent* gethostbyname (const char *host)
-{
- static struct hostent hostbuf;
- struct hostent *hp;
- size_t hstbuflen;
- char *tmphstbuf;
- int res;
- int herr;
-
- hstbuflen = 1024;
- /* Allocate buffer, remember to free it to avoid a memory leakage. */
- tmphstbuf = malloc (hstbuflen);
-
- while ((res = gethostbyname_r (host, &hostbuf, tmphstbuf, hstbuflen,
- &hp, &herr)) == ERANGE)
- {
- /* Enlarge the buffer. */
- hstbuflen *= 2;
- tmphstbuf = realloc (tmphstbuf, hstbuflen);
- }
- /* Check for errors. */
- if (res || hp == NULL)
- return NULL;
- return hp;
-}
-
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyname2.c b/mdk-stage1/dietlibc/libcruft/gethostbyname2.c
deleted file mode 100644
index 3d8296616..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyname2.c
+++ /dev/null
@@ -1,40 +0,0 @@
-
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-extern int h_errno;
-
-struct hostent* gethostbyname2(const char *host,int AF)
-{
- static struct hostent hostbuf;
- struct hostent *hp;
- size_t hstbuflen;
- char *tmphstbuf;
- int res;
- int herr;
-
- hstbuflen = 1024;
- /* Allocate buffer, remember to free it to avoid a memory leakage. */
- tmphstbuf = malloc (hstbuflen);
-
- while ((res = gethostbyname2_r (host, AF,&hostbuf, tmphstbuf, hstbuflen,
- &hp, &herr)) == ERANGE)
- {
- /* Enlarge the buffer. */
- hstbuflen *= 2;
- tmphstbuf = realloc (tmphstbuf, hstbuflen);
- }
- /* Check for errors. */
- if (res || hp == NULL)
- return NULL;
- return hp;
-}
-
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyname2_r.c b/mdk-stage1/dietlibc/libcruft/gethostbyname2_r.c
deleted file mode 100644
index b505ccfbc..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyname2_r.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <stdio.h>
-
-extern int __dns_gethostbyx_r(const char* name, struct hostent* result,
- char *buf, size_t buflen,
- struct hostent **RESULT, int *h_errnop, int lookfor);
-
-/* Oh boy, this interface sucks so badly, there are no words for it.
- * Not one, not two, but _three_ error signalling methods! (*h_errnop
- * nonzero? return value nonzero? *RESULT zero?) The glibc goons
- * really outdid themselves with this one. */
-int gethostbyname2_r(const char* name, int AF, struct hostent* result,
- char *buf, size_t buflen,
- struct hostent **RESULT, int *h_errnop) {
- int L=strlen(name);
- int lookfor=0;
- switch (AF) {
- case AF_INET: lookfor=1; break;
- case AF_INET6: lookfor=28; break;
- default: *h_errnop=EINVAL; return 1;
- }
- result->h_name=buf;
- if (buflen<L) { *h_errnop=ERANGE; return 1; }
- strcpy(buf,name);
- return __dns_gethostbyx_r(name,result,buf+L,buflen-L,RESULT,h_errnop,lookfor);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/gethostbyname_r.c b/mdk-stage1/dietlibc/libcruft/gethostbyname_r.c
deleted file mode 100644
index d5a531f0f..000000000
--- a/mdk-stage1/dietlibc/libcruft/gethostbyname_r.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <sys/poll.h>
-#include <unistd.h>
-#include <errno.h>
-
-#include <stdio.h>
-
-extern int __dns_gethostbyx_r(const char* name, struct hostent* result,
- char *buf, size_t buflen,
- struct hostent **RESULT, int *h_errnop, int lookfor);
-
-/* Oh boy, this interface sucks so badly, there are no words for it.
- * Not one, not two, but _three_ error signalling methods! (*h_errnop
- * nonzero? return value nonzero? *RESULT zero?) The glibc goons
- * really outdid themselves with this one. */
-int gethostbyname_r(const char* name, struct hostent* result,
- char *buf, size_t buflen,
- struct hostent **RESULT, int *h_errnop) {
- int L=strlen(name);
- result->h_name=buf;
- if (buflen<L) { *h_errnop=ERANGE; return 1; }
- strcpy(buf,name);
- return __dns_gethostbyx_r(name,result,buf+L,buflen-L,RESULT,h_errnop,1);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getlogin.c b/mdk-stage1/dietlibc/libcruft/getlogin.c
deleted file mode 100644
index 359f44d9f..000000000
--- a/mdk-stage1/dietlibc/libcruft/getlogin.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <stdlib.h>
-
-char* getlogin() {
- return getenv("LOGNAME");
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getpagesize.c b/mdk-stage1/dietlibc/libcruft/getpagesize.c
deleted file mode 100644
index dea4a9693..000000000
--- a/mdk-stage1/dietlibc/libcruft/getpagesize.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-
-#ifndef PAGE_SIZE
-#define PAGE_SIZE 4096
-#endif
-
-size_t __libc_getpagesize(void) {
- return PAGE_SIZE;
-}
-
-size_t getpagesize(void) __attribute__((weak,alias("__libc_getpagesize")));
-
diff --git a/mdk-stage1/dietlibc/libcruft/getpass.c b/mdk-stage1/dietlibc/libcruft/getpass.c
deleted file mode 100644
index 3da7cd2b3..000000000
--- a/mdk-stage1/dietlibc/libcruft/getpass.c
+++ /dev/null
@@ -1,40 +0,0 @@
-#include <termios.h>
-#include <unistd.h>
-#include <limits.h>
-#include <fcntl.h>
-#include <string.h>
-
-char *getpass(const char* prompt) {
- struct termios old,tmp;
- int out,in=open("/dev/tty",O_RDWR);
- int doclose=(in>=0);
- static char buf[PASS_MAX];
- if (doclose) { in=0; out=2; } else out=in;
- if (!tcgetattr(in,&old)) {
- tmp=old;
- tmp.c_lflag &= ~(ECHO|ISIG);
- tcsetattr(in,TCSAFLUSH,&tmp);
- }
- write(out,prompt,strlen(prompt));
- {
- int nread,ofs=0;
- for (;;) {
- nread=read(in,buf+ofs,PASS_MAX-ofs);
- if (nread<0) {
- buf[ofs]=0;
- break;
- } else if (ofs+nread>=PASS_MAX) {
- buf[PASS_MAX-1]=0;
- break;
- } else if (buf[ofs+nread-1]=='\n') {
- buf[ofs+nread-1]=0;
- break;
- }
- ofs+=nread;
- }
- write(out,"\n",1);
- }
- tcsetattr(in,TCSAFLUSH,&old);
- if (doclose) close(in);
- return buf;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getpwnam.c b/mdk-stage1/dietlibc/libcruft/getpwnam.c
deleted file mode 100644
index 53aae74d1..000000000
--- a/mdk-stage1/dietlibc/libcruft/getpwnam.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <pwd.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct passwd *getpwnam(const char * name) {
- struct passwd *tmp;
- setpwent();
- for (;;) {
- tmp=getpwent();
- if (!tmp) return 0;
- if (!strcmp(tmp->pw_name,name))
- return tmp;
- }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getpwuid.c b/mdk-stage1/dietlibc/libcruft/getpwuid.c
deleted file mode 100644
index eef14e6e8..000000000
--- a/mdk-stage1/dietlibc/libcruft/getpwuid.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <pwd.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct passwd *getpwuid(uid_t uid) {
- struct passwd *tmp;
- setpwent();
- for (;;) {
- tmp=getpwent();
- if (!tmp) return 0;
- if (tmp->pw_uid==uid)
- return tmp;
- }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/getspnam.c b/mdk-stage1/dietlibc/libcruft/getspnam.c
deleted file mode 100644
index e6573345d..000000000
--- a/mdk-stage1/dietlibc/libcruft/getspnam.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <shadow.h>
-#include <string.h>
-#include <stdlib.h>
-
-struct spwd *getspnam(const char * name) {
- struct spwd *tmp;
- setspent();
- for (;;) {
- tmp=getspent();
- if (!tmp) return 0;
- if (!strcmp(tmp->sp_namp,name))
- return tmp;
- }
-}
diff --git a/mdk-stage1/dietlibc/libcruft/grent.c b/mdk-stage1/dietlibc/libcruft/grent.c
deleted file mode 100644
index 0357657de..000000000
--- a/mdk-stage1/dietlibc/libcruft/grent.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * dietlibc/lib/grent.c - getgrent(3)/setgrent(3)/endgrent(3) implementation
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-
-#include "entlib.h" /* this is our only include */
-
-#define MAX_GROUP_MEMBERS 16 /* matches Linux kernel task struct */
-
-static struct __ent_state *st = NULL; /* state held across calls */
-static char *gr_mem[MAX_GROUP_MEMBERS+1];
-static struct group gr;
-
-struct group *getgrent(void)
-{
- char *parts[4], *grouplist;
- unsigned int bufptr;
-
- if (__ent_start(_PATH_GROUP, &st))
- return NULL;
- if (__ent_get_line(st))
- goto err_out;
- if (__ent_split(st, parts, 4, ':', 1) < 0)
- goto err_out;
-
- gr.gr_name = parts[0];
- gr.gr_passwd = parts[1];
- gr.gr_gid = (gid_t) atoi(parts[2]);
- grouplist = parts[3];
-
- memset(&gr_mem, 0, sizeof(gr_mem));
- gr.gr_mem = gr_mem;
-
- /* rewind bufptr to beginning of group list */
- bufptr = st->bufptr;
- st->bufptr = (int) (grouplist - st->ent_buf);
-
- __ent_split(st, gr_mem, MAX_GROUP_MEMBERS, ',', 0);
- st->bufptr = bufptr;
-
- return &gr;
-
-err_out:
- st->buflen = st->bufptr = 0; /* invalidate file data buffer */
- return NULL;
-}
-
-void setgrent(void) { __ent_set(st); }
-void endgrent(void) { __ent_end(st); st=NULL; }
diff --git a/mdk-stage1/dietlibc/libcruft/h_errno.c b/mdk-stage1/dietlibc/libcruft/h_errno.c
deleted file mode 100644
index 73ead0469..000000000
--- a/mdk-stage1/dietlibc/libcruft/h_errno.c
+++ /dev/null
@@ -1 +0,0 @@
-int h_errno;
diff --git a/mdk-stage1/dietlibc/libcruft/herrno_location.c b/mdk-stage1/dietlibc/libcruft/herrno_location.c
deleted file mode 100644
index 203f73d4b..000000000
--- a/mdk-stage1/dietlibc/libcruft/herrno_location.c
+++ /dev/null
@@ -1,5 +0,0 @@
-extern int h_errno;
-
-int *__h_errno_location() { return &h_errno; }
-
-int *h_errno_location() __attribute__((weak,alias("__h_errno_location")));
diff --git a/mdk-stage1/dietlibc/libcruft/inet_addr.c b/mdk-stage1/dietlibc/libcruft/inet_addr.c
deleted file mode 100644
index 0b8531ab1..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_addr.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-unsigned long int inet_addr(const char *cp) {
- struct in_addr foo;
- if (inet_aton(cp,&foo))
- return foo.s_addr;
- else
- return (unsigned long int)-1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_aton.c b/mdk-stage1/dietlibc/libcruft/inet_aton.c
deleted file mode 100644
index ac7d9d007..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_aton.c
+++ /dev/null
@@ -1,43 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <stdlib.h>
-
-/* inet_aton() converts the Internet host address cp from the standard
- * numbers-and-dots notation into binary data and stores it in the
- * structure that inp points to. inet_aton returns nonzero if the
- * address is valid, zero if not. */
-
-/* problem is, inet_aton is historically quite, uh, lenient.
- * the following are all acceptable:
- * 0x7f000001 == 127.1 == 127.0.0.1.0 == 127.0.0.1
- * btw: 127.0.0.x.y == 127.0.0.(x|y)
- * and: 10.1.1 == 10.1.0.1 (huh?!)
- * and: 10 == 0.0.0.10 (?!?!?)
- * The Berkeley people must have been so stoned that they are still high.
- */
-
-/* I hereby disclaim that I wrote this code. */
-int inet_aton(const char *cp, struct in_addr *inp) {
- int i;
- unsigned int ip=0;
- char *tmp=(char*)cp;
- for (i=24; ;) {
- long j;
- j=strtol(tmp,&tmp,0);
- if (*tmp==0) {
- ip|=j;
- break;
- }
- if (*tmp=='.') {
- if (j>255) return 0;
- ip|=(j<<i);
- if (i>0) i-=8;
- ++tmp;
- continue;
- }
- return 0;
- }
- inp->s_addr=htonl(ip);
- return 1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_ntoa.c b/mdk-stage1/dietlibc/libcruft/inet_ntoa.c
deleted file mode 100644
index f8c975f7a..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_ntoa.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-extern char *inet_ntoa_r(struct in_addr in,char* buf);
-
-char *inet_ntoa(struct in_addr in) {
- static char buf[20];
- return inet_ntoa_r(in,buf);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_ntoa_r.c b/mdk-stage1/dietlibc/libcruft/inet_ntoa_r.c
deleted file mode 100644
index dcf0eab7b..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_ntoa_r.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-static unsigned int i2a(char* dest,unsigned int x) {
- register unsigned int tmp=x;
- register unsigned int len=0;
- if (x>=100) { *dest++=tmp/100+'0'; tmp=tmp%100; ++len; }
- if (x>=10) { *dest++=tmp/10+'0'; tmp=tmp%10; ++len; }
- *dest++=tmp+'0';
- return len+1;
-}
-
-char *inet_ntoa_r(struct in_addr in,char* buf) {
- unsigned int len;
- unsigned char *ip=(unsigned char*)&in;
- len=i2a(buf,ip[0]); buf[len]='.'; ++len;
- len+=i2a(buf+ len,ip[1]); buf[len]='.'; ++len;
- len+=i2a(buf+ len,ip[2]); buf[len]='.'; ++len;
- len+=i2a(buf+ len,ip[3]); buf[len]=0;
- return buf;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_ntop.c b/mdk-stage1/dietlibc/libcruft/inet_ntop.c
deleted file mode 100644
index 77c47f239..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_ntop.c
+++ /dev/null
@@ -1,75 +0,0 @@
-#include <arpa/inet.h>
-
-extern char *inet_ntoa_r(struct in_addr in,char* buf);
-
-static const unsigned char V4mappedprefix[12]={0,0,0,0,0,0,0,0,0,0,0xff,0xff};
-
-static char tohex(char hexdigit) {
- return hexdigit>9?hexdigit+'a'-10:hexdigit+'0';
-}
-
-static int fmt_xlong(char* s,unsigned int i) {
- char* bak=s;
- *s=tohex((i>>12)&0xf); if (s!=bak || *s!='0') ++s;
- *s=tohex((i>>8)&0xf); if (s!=bak || *s!='0') ++s;
- *s=tohex((i>>4)&0xf); if (s!=bak || *s!='0') ++s;
- *s=tohex(i&0xf);
- return s-bak+1;
-}
-
-unsigned int fmt_ip6(char *s,const char ip[16])
-{
- unsigned int len;
- unsigned int i;
- unsigned int temp;
- unsigned int compressing;
- int j;
-
- len = 0; compressing = 0;
- for (j=0; j<16; j+=2) {
- if (j==12 && !memcmp(ip,V4mappedprefix,12)) {
- inet_ntoa_r(*(struct in_addr*)(ip+12),s);
- temp=strlen(s);
- return len+temp;
- }
- temp = ((unsigned long) (unsigned char) ip[j] << 8) +
- (unsigned long) (unsigned char) ip[j+1];
- if (temp == 0) {
- if (!compressing) {
- compressing=1;
- if (j==0) {
- *s++=':'; ++len;
- }
- }
- } else {
- if (compressing) {
- compressing=0;
- *s++=':'; ++len;
- }
- i = fmt_xlong(s,temp); len += i; s += i;
- if (j<14) {
- *s++ = ':';
- ++len;
- }
- }
- }
- *s=0;
- return len;
-}
-
-const char* inet_ntop(int AF, const void *CP, char *BUF, size_t LEN) {
- char buf[100];
- int len;
- if (AF==AF_INET) {
- inet_ntoa_r(*(struct in_addr*)CP,buf);
- len=strlen(buf);
- } else if (AF==AF_INET6) {
- len=fmt_ip6(buf,CP);
- } else
- return 0;
- if (len<LEN) {
- strcpy(BUF,buf);
- return BUF;
- }
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/inet_pton.c b/mdk-stage1/dietlibc/libcruft/inet_pton.c
deleted file mode 100644
index d5c17509c..000000000
--- a/mdk-stage1/dietlibc/libcruft/inet_pton.c
+++ /dev/null
@@ -1,97 +0,0 @@
-#include <stdlib.h>
-#include <arpa/inet.h>
-#include <errno.h>
-
-static unsigned int scan_ip6(const char *s,char ip[16])
-{
- unsigned int i;
- unsigned int len=0;
- unsigned long u;
-
- char suffix[16];
- int prefixlen=0;
- int suffixlen=0;
-
- for (i=0; i<16; i++) ip[i]=0;
-
- for (;;) {
- if (*s == ':') {
- len++;
- if (s[1] == ':') { /* Found "::", skip to part 2 */
- s+=2;
- len++;
- break;
- }
- s++;
- }
- {
- char *tmp;
- u=strtol(s,&tmp,16);
- i=tmp-s;
- }
-
- if (!i) return 0;
- if (prefixlen==12 && s[i]=='.') {
- /* the last 4 bytes may be written as IPv4 address */
- if (inet_aton(s,(struct in_addr*)(ip+12)))
- return i+len;
- else
- return 0;
- }
- ip[prefixlen++] = (u >> 8);
- ip[prefixlen++] = (u & 255);
- s += i; len += i;
- if (prefixlen==16)
- return len;
- }
-
-/* part 2, after "::" */
- for (;;) {
- if (*s == ':') {
- if (suffixlen==0)
- break;
- s++;
- len++;
- } else if (suffixlen!=0)
- break;
- {
- char *tmp;
- u=strtol(s,&tmp,16);
- i=tmp-s;
- }
- if (!i) {
- len--;
- break;
- }
- if (suffixlen+prefixlen<=12 && s[i]=='.') {
- if (inet_aton(s,(struct in_addr*)(suffix+suffixlen))) {
- suffixlen+=4;
- len+=strlen(s);
- break;
- } else
- prefixlen=12-suffixlen; /* make end-of-loop test true */
- }
- suffix[suffixlen++] = (u >> 8);
- suffix[suffixlen++] = (u & 255);
- s += i; len += i;
- if (prefixlen+suffixlen==16)
- break;
- }
- for (i=0; i<suffixlen; i++)
- ip[16-suffixlen+i] = suffix[i];
- return len;
-}
-
-int inet_pton(int AF, const char *CP, void *BUF) {
- if (AF==AF_INET) {
- if (!inet_aton(CP,(struct in_addr*)BUF))
- return 0;
- } else if (AF==AF_INET6) {
- if (CP[scan_ip6(CP,BUF)])
- return 0;
- } else {
- errno=EAFNOSUPPORT;
- return -1;
- }
- return 1;
-}
diff --git a/mdk-stage1/dietlibc/libcruft/initgroups.c b/mdk-stage1/dietlibc/libcruft/initgroups.c
deleted file mode 100644
index 7d24866e9..000000000
--- a/mdk-stage1/dietlibc/libcruft/initgroups.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <grp.h>
-#include <sys/types.h>
-#include <string.h>
-
-int initgroups(const char *user, gid_t group) {
- int n=0;
- gid_t grouplist[32];
- struct group *g;
- setgrent();
- while ((g=getgrent())) {
- char **duh=g->gr_mem;
- while (*duh) {
- if (!strcmp(*duh,user)) {
- grouplist[n]=g->gr_gid;
- if (++n>=32)
- break;
- }
- duh++;
- }
- }
- return setgroups(n,grouplist);
-}
-
diff --git a/mdk-stage1/dietlibc/libcruft/mkstemp.c b/mdk-stage1/dietlibc/libcruft/mkstemp.c
deleted file mode 100644
index 3b24ecb54..000000000
--- a/mdk-stage1/dietlibc/libcruft/mkstemp.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <fcntl.h>
-#include <string.h>
-#include <errno.h>
-
-int mkstemp(char* template) {
- char *tmp=template+strlen(template)-6;
- int randfd;
- int i,res;
- unsigned int random;
- for (i=0; i<6; ++i) if (tmp[i]!='X') { __set_errno(EINVAL); return -1; }
- randfd=open("/dev/urandom",O_RDONLY);
- for (;;) {
- read(randfd,&random,sizeof(random));
- for (i=0; i<6; ++i) {
- int hexdigit=(random>>(i*5))&0x1f;
- tmp[i]=hexdigit>9?hexdigit+'a'-10:hexdigit+'0';
- }
- res=open(template,O_CREAT|O_RDWR|O_EXCL,0600);
- if (res>=0) return res;
- }
- close(randfd);
-}
diff --git a/mdk-stage1/dietlibc/libcruft/pwent.c b/mdk-stage1/dietlibc/libcruft/pwent.c
deleted file mode 100644
index 30a8a0957..000000000
--- a/mdk-stage1/dietlibc/libcruft/pwent.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * dietlibc/lib/pwent.c - getpwent(3)/setpwent(3)/endpwent(3) implementation
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-
-#include "entlib.h" /* this is our only include */
-
-static struct __ent_state *st = NULL; /* state held across calls */
-static struct passwd pw;
-
-struct passwd *getpwent(void)
-{
- char *parts[7];
-
- if (__ent_start(_PATH_PASSWD, &st))
- return NULL;
- if (__ent_get_line(st))
- goto err_out;
- if (__ent_split(st, parts, 7, ':', 1) < 0)
- goto err_out;
-
- pw.pw_name = parts[0];
- pw.pw_passwd = parts[1];
- pw.pw_uid = (uid_t) atoi(parts[2]);
- pw.pw_gid = (gid_t) atoi(parts[3]);
- pw.pw_gecos = parts[4];
- pw.pw_dir = parts[5];
- pw.pw_shell = parts[6];
-
- return &pw;
-
-err_out:
- st->buflen = st->bufptr = 0; /* invalidate file data buffer */
- return NULL;
-}
-
-void setpwent(void) { __ent_set(st); }
-void endpwent(void) { __ent_end(st); st=NULL; }
diff --git a/mdk-stage1/dietlibc/libcruft/res_init.c b/mdk-stage1/dietlibc/libcruft/res_init.c
deleted file mode 100644
index 9322af298..000000000
--- a/mdk-stage1/dietlibc/libcruft/res_init.c
+++ /dev/null
@@ -1,7 +0,0 @@
-extern int __dns_servers;
-extern void __dns_readstartfiles(void);
-
-int res_init(void) {
- __dns_servers=0;
- __dns_readstartfiles();
-}
diff --git a/mdk-stage1/dietlibc/libcruft/spent.c b/mdk-stage1/dietlibc/libcruft/spent.c
deleted file mode 100644
index e4beb81e4..000000000
--- a/mdk-stage1/dietlibc/libcruft/spent.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * dietlibc/lib/spent.c - getspent(3)/setspent(3)/endspent(3) implementation
- *
- * Copyright 2001 Jeff Garzik <jgarzik@mandrakesoft.com>
- *
- * This is a brand new implementation, based on the interface
- * described in man-pages-1.34-1mdk man pages package.
- */
-
-
-#include "entlib.h" /* this is our only include */
-
-static struct __ent_state *st = NULL; /* state held across calls */
-static struct spwd sp;
-
-struct spwd *getspent(void)
-{
- char *parts[9];
-
- if (__ent_start(_PATH_SHADOW, &st))
- return NULL;
- if (__ent_get_line(st))
- goto err_out;
- if (__ent_split(st, parts, 9, ':', 1) < 0)
- goto err_out;
-
- sp.sp_namp = parts[0];
- sp.sp_pwdp = parts[1];
- sp.sp_lstchg = atoi(parts[2]); /* XXX: atol */
- sp.sp_min = atoi(parts[3]);
- sp.sp_max = atoi(parts[4]);
- sp.sp_warn = atoi(parts[5]);
- sp.sp_inact = atoi(parts[6]);
- sp.sp_expire = atoi(parts[7]);
- sp.sp_flag = atoi(parts[8]);
-
- return &sp;
-
-err_out:
- st->buflen = st->bufptr = 0; /* invalidate file data buffer */
- return NULL;
-}
-
-void setspent(void) { __ent_set(st); }
-void endspent(void) { __ent_end(st); st=NULL; }
diff --git a/mdk-stage1/dietlibc/libcrypt/crypt.c b/mdk-stage1/dietlibc/libcrypt/crypt.c
deleted file mode 100644
index 933397f5f..000000000
--- a/mdk-stage1/dietlibc/libcrypt/crypt.c
+++ /dev/null
@@ -1,309 +0,0 @@
-#include "dietfeatures.h"
-#include <unistd.h>
-
-/* Initial permutation, */
-static char IP[] = {
- 57,49,41,33,25,17, 9, 1,
- 59,51,43,35,27,19,11, 3,
- 61,53,45,37,29,21,13, 5,
- 63,55,47,39,31,23,15, 7,
- 56,48,40,32,24,16, 8, 0,
- 58,50,42,34,26,18,10, 2,
- 60,52,44,36,28,20,12, 4,
- 62,54,46,38,30,22,14, 6
-};
-
-/* Final permutation, FP = IP^(-1) */
-static char FP[] = {
- 39, 7,47,15,55,23,63,31,
- 38, 6,46,14,54,22,62,30,
- 37, 5,45,13,53,21,61,29,
- 36, 4,44,12,52,20,60,28,
- 35, 3,43,11,51,19,59,27,
- 34, 2,42,10,50,18,58,26,
- 33, 1,41, 9,49,17,57,25,
- 32, 0,40, 8,48,16,56,24
-};
-
-/* Permuted-choice 1 from the key bits to yield C and D.
- * Note that bits 8,16... are left out: They are intended for a parity check.
- */
-static char PC1_C[] = {
- 56,48,40,32,24,16, 8,
- 0,57,49,41,33,25,17,
- 9, 1,58,50,42,34,26,
- 18,10, 2,59,51,43,35
-};
-
-static char PC1_D[] = {
- 62,54,46,38,30,22,14,
- 6,61,53,45,37,29,21,
- 13, 5,60,52,44,36,28,
- 20,12, 4,27,19,11, 3
-};
-
-/* Sequence of shifts used for the key schedule. */
-static char shifts[] = { 1,1,2,2,2,2,2,2,1,2,2,2,2,2,2,1 };
-
-/*
- * Permuted-choice 2, to pick out the bits from the CD array that generate
- * the key schedule.
- */
-static char PC2_C[] = {
- 13, 16, 10, 23, 0, 4, 2, 27, 14, 5, 20, 9,
- 22, 18, 11, 3, 25, 7, 15, 6, 26, 19, 12, 1
-};
-
-static char PC2_D[] = {
- 12, 23, 2, 8, 18, 26, 1, 11, 22, 16, 4, 19,
- 15, 20, 10, 27, 5, 24, 17, 13, 21, 7, 0, 3
-};
-
-/* The C and D arrays used to calculate the key schedule. */
-
-static char C[28];
-static char D[28];
-/* The key schedule. Generated from the key. */
-static char KS[16][48];
-
-/* The E bit-selection table. */
-static char E[48];
-static char e2[] = {
- 32, 1, 2, 3, 4, 5, 4, 5, 6, 7, 8, 9,
- 8, 9, 10, 11, 12, 13, 12, 13, 14, 15, 16, 17,
- 16, 17, 18, 19, 20, 21, 20, 21, 22, 23, 24, 25,
- 24, 25, 26, 27, 28, 29, 28, 29, 30, 31, 32, 1
-};
-
-/* Set up the key schedule from the key. */
-void setkey(const char *key)
-{
- register int i, j, k;
- int t;
- int s;
-
- /* First, generate C and D by permuting the key. The low order bit of each
- * 8-bit char is not used, so C and D are only 28 bits apiece.
- */
- for(i=0; i < 28; i++) {
- C[i] = key[(int)PC1_C[i]];
- D[i] = key[(int)PC1_D[i]];
- }
- /* To generate Ki, rotate C and D according to schedule and pick up a
- * permutation using PC2.
- */
- for(i=0; i < 16; i++) {
- /* rotate. */
- s = shifts[i];
- for(k=0; k < s; k++) {
- t = C[0];
- for(j=0; j < 27; j++)
- C[j] = C[j+1];
- C[27] = t;
- t = D[0];
- for(j=0; j < 27; j++)
- D[j] = D[j+1];
- D[27] = t;
- }
- /* get Ki. Note C and D are concatenated. */
- for(j=0; j < 24; j++) {
- KS[i][j] = C[(int)PC2_C[j]];
- KS[i][j+24] = D[(int)PC2_D[j]];
- }
- }
-
- for(i=0; i < 48; i++)
- E[i] = e2[i];
-}
-
-/* The 8 selection functions. For some reason, they give a 0-origin index,
- * unlike everything else.
- */
-static char S[8][64] = {
- {
- 14, 4,13, 1, 2,15,11, 8, 3,10, 6,12, 5, 9, 0, 7,
- 0,15, 7, 4,14, 2,13, 1,10, 6,12,11, 9, 5, 3, 8,
- 4, 1,14, 8,13, 6, 2,11,15,12, 9, 7, 3,10, 5, 0,
- 15,12, 8, 2, 4, 9, 1, 7, 5,11, 3,14,10, 0, 6,13
- },
-
- {
- 15, 1, 8,14, 6,11, 3, 4, 9, 7, 2,13,12, 0, 5,10,
- 3,13, 4, 7,15, 2, 8,14,12, 0, 1,10, 6, 9,11, 5,
- 0,14, 7,11,10, 4,13, 1, 5, 8,12, 6, 9, 3, 2,15,
- 13, 8,10, 1, 3,15, 4, 2,11, 6, 7,12, 0, 5,14, 9
- },
-
- {
- 10, 0, 9,14, 6, 3,15, 5, 1,13,12, 7,11, 4, 2, 8,
- 13, 7, 0, 9, 3, 4, 6,10, 2, 8, 5,14,12,11,15, 1,
- 13, 6, 4, 9, 8,15, 3, 0,11, 1, 2,12, 5,10,14, 7,
- 1,10,13, 0, 6, 9, 8, 7, 4,15,14, 3,11, 5, 2,12
- },
-
- {
- 7,13,14, 3, 0, 6, 9,10, 1, 2, 8, 5,11,12, 4,15,
- 13, 8,11, 5, 6,15, 0, 3, 4, 7, 2,12, 1,10,14, 9,
- 10, 6, 9, 0,12,11, 7,13,15, 1, 3,14, 5, 2, 8, 4,
- 3,15, 0, 6,10, 1,13, 8, 9, 4, 5,11,12, 7, 2,14
- },
-
- {
- 2,12, 4, 1, 7,10,11, 6, 8, 5, 3,15,13, 0,14, 9,
- 14,11, 2,12, 4, 7,13, 1, 5, 0,15,10, 3, 9, 8, 6,
- 4, 2, 1,11,10,13, 7, 8,15, 9,12, 5, 6, 3, 0,14,
- 11, 8,12, 7, 1,14, 2,13, 6,15, 0, 9,10, 4, 5, 3
- },
-
- {
- 12, 1,10,15, 9, 2, 6, 8, 0,13, 3, 4,14, 7, 5,11,
- 10,15, 4, 2, 7,12, 9, 5, 6, 1,13,14, 0,11, 3, 8,
- 9,14,15, 5, 2, 8,12, 3, 7, 0, 4,10, 1,13,11, 6,
- 4, 3, 2,12, 9, 5,15,10,11,14, 1, 7, 6, 0, 8,13
- },
-
- {
- 4,11, 2,14,15, 0, 8,13, 3,12, 9, 7, 5,10, 6, 1,
- 13, 0,11, 7, 4, 9, 1,10,14, 3, 5,12, 2,15, 8, 6,
- 1, 4,11,13,12, 3, 7,14,10,15, 6, 8, 0, 5, 9, 2,
- 6,11,13, 8, 1, 4,10, 7, 9, 5, 0,15,14, 2, 3,12
- },
-
- {
- 13, 2, 8, 4, 6,15,11, 1,10, 9, 3,14, 5, 0,12, 7,
- 1,15,13, 8,10, 3, 7, 4,12, 5, 6,11, 0,14, 9, 2,
- 7,11, 4, 1, 9,12,14, 2, 0, 6,10,13,15, 3, 5, 8,
- 2, 1,14, 7, 4,10, 8,13,15,12, 9, 0, 3, 5, 6,11
- }
-};
-
-/* P is a permutation on the selected combination of the current L and key. */
-static char P[] = {
- 15, 6,19,20, 28,11,27,16, 0,14,22,25, 4,17,30, 9,
- 1, 7,23,13, 31,26, 2, 8, 18,12,29, 5, 21,10, 3,24
-};
-
-/* The current block, divided into 2 halves. */
-static char L[32], R[32];
-static char tempL[32];
-static char f[32];
-
-/* The combination of the key and the input, before selection. */
-static char preS[48];
-
-/* The payoff: encrypt a block. */
-void encrypt(char block[64], int edflag)
-{
- int i, ii;
- register int t, j, k;
-
- /* First, permute the bits in the input */
- for(j=0; j < 64; j++)
- L[j] = block[(int)IP[j]];
- /* Perform an encryption operation 16 times. */
- for(ii=0; ii < 16; ii++) {
- i = ii;
- /* Save the R array, which will be the new L. */
- for(j=0; j < 32; j++)
- tempL[j] = R[j];
- /* Expand R to 48 bits using the E selector;
- * exclusive-or with the current key bits.
- */
- for(j=0; j < 48; j++)
- preS[j] = R[E[j]-1] ^ KS[i][j];
- /* The pre-select bits are now considered in 8 groups of 6 bits each.
- * The 8 selection functions map these 6-bit quantities into 4-bit
- * quantities and the results permuted to make an f(R, K).
- * The indexing into the selection functions is peculiar;
- * it could be simplified by rewriting the tables.
- */
- for(j=0; j < 8; j++) {
- t = ((j<<1)+j)<<1;
- k = S[j][(preS[t]<<5)+
- (preS[t+1]<<3)+
- (preS[t+2]<<2)+
- (preS[t+3]<<1)+
- (preS[t+4] )+
- (preS[t+5]<<4)];
- t = j << 2;
- f[t ] = (k>>3)&01;
- f[t+1] = (k>>2)&01;
- f[t+2] = (k>>1)&01;
- f[t+3] = (k )&01;
- }
- /* The new R is L ^ f(R, K). The f here has to be permuted first, though. */
- for(j=0; j < 32; j++)
- R[j] = L[j] ^ f[(int)P[j]];
- /* Finally, the new L (the original R) is copied back. */
- for(j=0; j < 32; j++)
- L[j] = tempL[j];
- }
- /* The output L and R are reversed. */
- for(j=0; j < 32; j++) {
- L[j] ^= R[j];
- R[j] ^= L[j];
- L[j] ^= R[j];
- }
- /* The final output gets the inverse permutation of the very original. */
- for(j=0; j < 64; j++)
- block[j] = L[(int)FP[j]];
-}
-
-char * crypt(const char *pw, const char *salt)
-{
- register int i, j, c;
- static char block[66], iobuf[16];
-
- for(i=0; i < 66; i++)
- block[i] = 0;
- for(i=0; (c= *pw) && i < 64; pw++) {
- for(j=0; j < 7; j++, i++)
- block[i] = (c>>(6-j)) & 01;
- i++;
- }
-
- setkey(block);
-
- for(i=0; i < 66; i++)
- block[i] = 0;
-
- for(i=0; i < 2; i++) {
- c = *salt++;
- iobuf[i] = c;
- if(c > 'Z')
- c -= 6;
- if(c > '9')
- c -= 7;
- c -= '.';
- for(j=0; j < 6; j++) {
- if((c>>j) & 01) {
- int ind1 = (((i<<1)+i)<< 1) + j;
- int ind2 = ind1 + 24;
- E[ind1] ^= E[ind2];
- E[ind2] ^= E[ind1];
- E[ind1] ^= E[ind2];
- }
- }
- }
-
- for(i=0; i < 25; i++)
- encrypt(block, 0);
-
- for(i=0; i < 11; i++) {
- c = 0;
- for(j=0; j < 6; j++) {
- c <<= 1;
- c |= block[(((i<<1)+i)<<1)+j];
- }
- c += '.';
- if(c > '9')
- c += 7;
- if(c > 'Z')
- c += 6;
- iobuf[i+2] = c;
- }
- iobuf[i+2] = 0;
- if(iobuf[1] == 0)
- iobuf[1] = iobuf[0];
- return(iobuf);
-}
diff --git a/mdk-stage1/dietlibc/libdl/Makefile b/mdk-stage1/dietlibc/libdl/Makefile
deleted file mode 100644
index c0463f887..000000000
--- a/mdk-stage1/dietlibc/libdl/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-# local "test" make file
-
-SRC = $(wildcard *.c) test/test.c
-OBJ = _dl_jump.o $(SRC:.c=.o)
-
-#CFLAGS = -Wall -O2
-CFLAGS = -g
-
-%.o : %.S
- $(HOME)/bin/diet gcc $(CFLAGS) -c -o $@ $^
-
-%.o : %.c
- $(HOME)/bin/diet gcc $(CFLAGS) -c -o $@ $^
-
-all: test.out
-
-test.g: test.c
- gcc -o $@ $^ -ldl
-
-test.out: $(OBJ)
- $(HOME)/bin/diet gcc -o $@ $^
-
-clean:
- $(RM) *.o *.a *.out *~ # *.so
diff --git a/mdk-stage1/dietlibc/libdl/README b/mdk-stage1/dietlibc/libdl/README
deleted file mode 100644
index 5d77bde34..000000000
--- a/mdk-stage1/dietlibc/libdl/README
+++ /dev/null
@@ -1,6 +0,0 @@
-this is the experimental libdl test-pre-pre-alpha code
-
-written by Olaf Dreesen
-
-Shouldn't work yet had some problems with the elf specs...
-and more inconsistencies...
diff --git a/mdk-stage1/dietlibc/libdl/_dl_int.h b/mdk-stage1/dietlibc/libdl/_dl_int.h
deleted file mode 100644
index 659e6ee0f..000000000
--- a/mdk-stage1/dietlibc/libdl/_dl_int.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef ___DL_INT_H__
-#define ___DL_INT_H__
-
-#include <elf.h>
-
-struct _dl_handle {
- /* basic */
- void * mem_base; /* base address of maped *.so */
- unsigned long mem_size; /* len of mem block */
- unsigned int lnk_count; /* reference count */
-
- /* symbol resolve helper */
- unsigned long*hash_tab; /* hash table */
- Elf32_Sym * dyn_sym_tab; /* dynamic symbol table */
- char * dyn_str_tab; /* dyn_name table */
-
- Elf32_Rel * plt_rel; /* PLT relocation table */
-
- /* FINI */
- void (*fini)(void);
-};
-
-#define HASH_BUCKET_LEN(p) ((p))
-#define HASH_BUCKET(p) ((p)+2)
-
-#define HASH_CHAIN_LEN(p) ((p)+1)
-#define HASH_CHAIN(p) ((p)+2+HASH_BUCKET_LEN(p))
-
-unsigned long elf_hash(const unsigned char *name);
-
-#endif
diff --git a/mdk-stage1/dietlibc/libdl/_dl_jump.S b/mdk-stage1/dietlibc/libdl/_dl_jump.S
deleted file mode 100644
index 134f31ea5..000000000
--- a/mdk-stage1/dietlibc/libdl/_dl_jump.S
+++ /dev/null
@@ -1,8 +0,0 @@
-.text
-.global _dl_jump
-_dl_jump:
- call do_rel
- pop %edx
- pop %edx
- jmp *%eax
-
diff --git a/mdk-stage1/dietlibc/libdl/_dl_open.c b/mdk-stage1/dietlibc/libdl/_dl_open.c
deleted file mode 100644
index 1f907db21..000000000
--- a/mdk-stage1/dietlibc/libdl/_dl_open.c
+++ /dev/null
@@ -1,207 +0,0 @@
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/mman.h>
-#include <dlfcn.h>
-#include <linux/elf.h>
-
-#include "_dl_int.h"
-
-struct _dl_handle dl_test;
-
-#define _ELF_DWN_ROUND(ps,n) ((n)&(~((ps)-1)))
-#define _ELF_UP_ROUND(ps,n) ((((n)&((ps)-1))?(ps):0)+ _ELF_DWN_ROUND((ps),(n)))
-#define _ELF_RST_ROUND(ps,n) ((n)&((ps)-1))
-
-void _dl_jump();
-
-/*
- * this file is a Q. & D. hack ... don't think this is bug free or meaningfull
- */
-
-static void *do_map_in(void *base, unsigned long length, int flags, int fd, unsigned long offset)
-{
- int perm = 0;
- if (flags & PF_X) perm|=PROT_EXEC;
- if (flags & PF_R) perm|=PROT_READ;
- if (flags & PF_W) perm|=PROT_WRITE;
- return mmap(base, length, perm, MAP_PRIVATE|((base)?MAP_FIXED:0), fd, offset);
-}
-
-unsigned long do_rel(struct _dl_handle * tmp_dl, unsigned long off)
-{
-// struct _dl_handle * tmp_dl = ((void*)*((&off)-1));
- Elf32_Rel *tmp = ((void*)tmp_dl->plt_rel)+off;
- int sym=ELF32_R_SYM(tmp->r_info);
- register unsigned long sym_val;
-
- printf("do_rel %08x %08x\n",tmp_dl,off);
-
- printf ("do_rel %08x+%x\n",tmp_dl->plt_rel,off);
- printf("do_rel @ %08x with type %d -> %d\n",tmp->r_offset,ELF32_R_TYPE(tmp->r_info),sym);
-
- printf("do_rel sym %08x\n",tmp_dl->dyn_sym_tab[sym].st_value);
-
- /* modify GOT for REAL symbol */
- sym_val=((unsigned long)(tmp_dl->mem_base+tmp_dl->dyn_sym_tab[sym].st_value));
- *((unsigned long*)(tmp_dl->mem_base+tmp->r_offset))=sym_val;
-
- printf("do_rel sym %08x\n",sym_val);
- /* HOWTO JUMP ?!? */
- return sym_val;
-}
-
-void *_dl_open(const char*pathname, int fd, int flag)
-{
- int ps=getpagesize();
- int i;
- unsigned char buf[1024];
- char *m=0,*d;
- struct _dl_handle *ret=0;
-
- unsigned long l;
-
- Elf32_Ehdr *eh;
- Elf32_Phdr *ph;
-
- int ld_nr=0;
- Elf32_Phdr *ld[4]={0,0,0,0};
- Elf32_Phdr *dyn=0;
-
- if (fd==-1) return 0;
-
- printf("_dl_open: %s\n",pathname);
-
- read(fd, buf, 1024);
- eh=(Elf32_Ehdr*)buf;
- ph=(Elf32_Phdr*)&buf[eh->e_phoff];
-
- for (i=0; i<eh->e_phnum; i++) {
- if (ph[i].p_type==PT_LOAD) {
- ld[ld_nr++]=ph+i;
- }
- if (ph[i].p_type==PT_DYNAMIC) {
- dyn=ph+i;
- }
- }
-
- if (ld_nr==1) {
- unsigned long offset = _ELF_DWN_ROUND(ps,ld[0]->p_offset);
- unsigned long off = _ELF_RST_ROUND(ps,ld[0]->p_offset);
- unsigned long length = _ELF_UP_ROUND(ps,ld[0]->p_memsz+off);
- m = (char*)do_map_in(0, length, ld[0]->p_flags, fd, offset);
-
- /* zero pad bss */
- l = ld[0]->p_offset+ld[0]->p_filesz;
- memset(m+l,0,length-l);
-
- dl_test.mem_base=m;
- dl_test.mem_size=length;
- dl_test.lnk_count=0;
-
- ret = &dl_test;
- }
- else if (ld_nr==2) { /* aem... yes Quick & Really Dirty / for the avarage 99% */
- //unsigned long text_addr = _ELF_DWN_ROUND(ps,ld[0]->p_vaddr);
- unsigned long text_offset = _ELF_DWN_ROUND(ps,ld[0]->p_offset);
- unsigned long text_off = _ELF_RST_ROUND(ps,ld[0]->p_offset);
- unsigned long text_size = _ELF_UP_ROUND(ps,ld[0]->p_memsz+text_off);
-
- unsigned long data_addr = _ELF_DWN_ROUND(ps,ld[1]->p_vaddr);
- unsigned long data_offset = _ELF_DWN_ROUND(ps,ld[1]->p_offset);
- unsigned long data_off = _ELF_RST_ROUND(ps,ld[1]->p_offset);
- unsigned long data_size = _ELF_UP_ROUND(ps,ld[1]->p_memsz+data_off);
- unsigned long data_fsize = _ELF_UP_ROUND(ps,ld[1]->p_filesz+data_off);
-
- /* mmap all mem_blocks for *.so */
- l = text_size+data_size;
-
- dl_test.mem_size=l;
-
- m = (char*) do_map_in(0,l,ld[0]->p_flags,fd,text_offset);
-
- /* release data,bss part */
- mprotect(m+data_addr, data_size, PROT_NONE);
-
- /* mmap data,bss part */
- d = (char*) do_map_in(m+data_addr,data_fsize,ld[1]->p_flags,fd,data_offset);
-
- /* zero pad bss */
- l = data_off+ld[1]->p_filesz;
- memset(d+l,0,data_size-l);
-
- /* more bss ? */
- if (data_size>data_fsize) {
- l = data_size-data_fsize;
- mmap(d+data_fsize, l, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0);
- }
-
- dl_test.mem_base=m;
- dl_test.lnk_count=0;
- ret = &dl_test;
- }
-
- printf("_dl_open pre resolv\n");
- if (ret) {
- Elf32_Dyn* dyn_tab = (void*)m+dyn->p_vaddr;
- void (*init)();
- unsigned long* got=0;
- void* jmprel=0;
- int pltreltype=0;
- int pltrelsize=0;
-
- printf("_dl_open IN resolv\n");
- for(i=0;dyn_tab[i].d_tag;i++) {
- if (dyn_tab[i].d_tag==DT_HASH) {
- ret->hash_tab = (unsigned long*)(m+dyn_tab[i].d_un.d_ptr);
- }
- if (dyn_tab[i].d_tag==DT_SYMTAB) {
- ret->dyn_sym_tab = (Elf32_Sym*)(m+dyn_tab[i].d_un.d_ptr);
- }
- if (dyn_tab[i].d_tag==DT_STRTAB) {
- ret->dyn_str_tab = (char*)(m+dyn_tab[i].d_un.d_ptr);
- }
- if (dyn_tab[i].d_tag==DT_FINI) {
- ret->fini = (void(*)(void))(m+dyn_tab[i].d_un.d_val);
- }
- if (dyn_tab[i].d_tag==DT_INIT) {
- init = (void(*)(void))(m+dyn_tab[i].d_un.d_val);
- printf("init @ %08x\n",init);
- }
- if (dyn_tab[i].d_tag==DT_PLTGOT) {
- got=(unsigned long*)(m+dyn_tab[i].d_un.d_val);
- }
- if (dyn_tab[i].d_tag==DT_PLTREL) {
- pltreltype=dyn_tab[i].d_un.d_val;
- }
- if (dyn_tab[i].d_tag==DT_PLTRELSZ) {
- pltrelsize=dyn_tab[i].d_un.d_val;
- }
- if (dyn_tab[i].d_tag==DT_JMPREL) {
- jmprel=(m+dyn_tab[i].d_un.d_val);
- dl_test.plt_rel=jmprel;
- }
- }
- /* GOT */
- got[0]+=(unsigned long)m;
- got[1]=(unsigned long)&dl_test;
-// got[2]=(unsigned long)do_rel;
- got[2]=(unsigned long)(_dl_jump);
- /* */
-
- if (pltreltype == DT_REL) {
- Elf32_Rel *tmp = jmprel;
- for (;(char*)tmp<(((char*)jmprel)+pltrelsize);(char*)tmp=((char*)tmp)+sizeof(Elf32_Rel)) {
- *((unsigned long*)(m+tmp->r_offset))+=(unsigned long)m;
-// *((unsigned long*)(m+tmp->r_offset))+=(unsigned long)do_rel;
- printf("rel @ %08x with type %d -> %d\n",tmp->r_offset,ELF32_R_TYPE(tmp->r_info),ELF32_R_SYM(tmp->r_info));
- }
- }
-
- printf("_dl_open post resolv, pre init\n");
- init();
- }
- printf("_dl_open post resolv, init\n");
-
- close(fd);
- return ret;
-}
diff --git a/mdk-stage1/dietlibc/libdl/_dl_search.c b/mdk-stage1/dietlibc/libdl/_dl_search.c
deleted file mode 100644
index 5e3217d46..000000000
--- a/mdk-stage1/dietlibc/libdl/_dl_search.c
+++ /dev/null
@@ -1,84 +0,0 @@
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <dlfcn.h>
-
-#include <fcntl.h>
-#include <stdio.h>
-
-#define WANT_LD_SO_CONF_SEARCH
-
-static const char *_dl_search_rpath=0;
-void _dl_set_rpath(const char *path) { _dl_search_rpath=path; }
-
-/* search a colon (semicolon) seperated path for the libraray "filename" */
-static int _dl_search_path(char *buf, int len, const char*path, const int pathlen, const char *filename)
-{
- int fd,l=len,i=1;
- const char *c,*pe=path+pathlen;
-
- if (path) {
- for (c=path; c<pe; c+=i) {
- if ((*c==':')||(*c==';')) ++c;
- i=strcspn(c,":;");
- if (i) {
- strncpy(buf, c, i); buf[i]=0;
- l-=i;
- strncat(buf, "/", l);
- }
- else
- buf[0]=0;
- strncat(buf, filename, --l);
-// printf("_dl_search: %s\n",buf);
- if ((fd=open(buf,O_RDONLY))!=-1) return fd;
- }
- }
- return -1;
-}
-
-/* parse the SMALL file "conf" for lib directories (aem... hang me if you can :) ) */
-static int _dl_search_conf(char *buf, int len, const char *conf, const char *filename)
-{
- char ld_so_conf[1024];
- int i,l,fd=open(conf,O_RDONLY);
- if (fd!=-1) {
- l=read(fd,ld_so_conf,sizeof(ld_so_conf)-1);
- ld_so_conf[sizeof(ld_so_conf)-1]=0;
- close(fd);
- if (ld_so_conf[l-1]=='\n') ld_so_conf[--l]=0;
- for (i=0;i<l;i++) if (ld_so_conf[i]=='\n') ld_so_conf[i]=':';
- if ((fd=_dl_search_path(buf,len,ld_so_conf,l,filename))!=-1) return fd;
- }
- return -1;
-}
-
-int _dl_search(char *buf, int len, const char *filename)
-{
- int fd;
-
- /* 1. search the LD_RUN_PATH (from the executable */
- if (_dl_search_rpath) {
- if ((fd=_dl_search_path(buf,len,_dl_search_rpath,strlen(_dl_search_rpath),filename))!=-1) return fd;
- }
-
- /* 2. IF we have a "secure" enviroment THEN search LD_LIBRARY_PATH */
- if (getuid()==geteuid()) {
- char *p=getenv("LD_LIBRARY_PATH");
- if (p)
- if ((fd=_dl_search_path(buf,len,p,strlen(p),filename))!=-1) return fd;
- }
-
- /* 3. search all pathes in the the /etc/diet.ld.conf, a dietlibc extension :) */
- if ((fd=_dl_search_conf(buf,len,"/etc/diet.ld.conf",filename))!=-1) return fd;
-
-#ifdef WANT_LD_SO_CONF_SEARCH
- /* 4. search all pathes in the the /etc/ld.so.conf / can't handle this ...=lib?? crap */
- if ((fd=_dl_search_conf(buf,len,"/etc/ld.so.conf",filename))!=-1) return fd;
-#endif
-
- /* default path search */
- {
- const char* def_path="/usr/lib:/lib";
- return _dl_search_path(buf,len,def_path,strlen(def_path),filename);
- }
-}
diff --git a/mdk-stage1/dietlibc/libdl/dlclose.c b/mdk-stage1/dietlibc/libdl/dlclose.c
deleted file mode 100644
index 384550c47..000000000
--- a/mdk-stage1/dietlibc/libdl/dlclose.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include "_dl_int.h"
-
-int dlclose (void *handle)
-{
- if (handle) {
- struct _dl_handle *h = handle;
- if (h->lnk_count) {
- --h->lnk_count;
- return -1;
- }
- if (munmap(h->mem_base,h->mem_size)!=0) return -1;
- }
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libdl/dlerror.c b/mdk-stage1/dietlibc/libdl/dlerror.c
deleted file mode 100644
index 1e31bae54..000000000
--- a/mdk-stage1/dietlibc/libdl/dlerror.c
+++ /dev/null
@@ -1,4 +0,0 @@
-const char *dlerror(void)
-{
- return "HAE ?!?";
-}
diff --git a/mdk-stage1/dietlibc/libdl/dlopen.c b/mdk-stage1/dietlibc/libdl/dlopen.c
deleted file mode 100644
index 1693d889f..000000000
--- a/mdk-stage1/dietlibc/libdl/dlopen.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <fcntl.h>
-#include <dlfcn.h>
-#include <limits.h>
-
-int _dl_search(char*buf, int bufsize, const char*filename);
-void *_dl_open(const char*pathname, int fd, int flag);
-
-void *dlopen (const char *filename, int flag)
-{
- int fd;
- char buf[PATH_MAX];
- const char *p;
- if (*filename=='/')
- fd=open(p=filename,O_RDONLY);
- else {
- p=buf;
- fd=_dl_search(buf,sizeof(buf),filename);
- }
-
- return _dl_open(p,fd,flag);
-}
diff --git a/mdk-stage1/dietlibc/libdl/dlsym.c b/mdk-stage1/dietlibc/libdl/dlsym.c
deleted file mode 100644
index 2af940837..000000000
--- a/mdk-stage1/dietlibc/libdl/dlsym.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "_dl_int.h"
-
-void *dlsym(void *handle, char *symbol)
-{
- printf("dlsym(%08x,%s) -> %08x\n",handle,symbol,elf_hash(symbol)%17);
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libdl/elf_hash.c b/mdk-stage1/dietlibc/libdl/elf_hash.c
deleted file mode 100644
index 463dba0dd..000000000
--- a/mdk-stage1/dietlibc/libdl/elf_hash.c
+++ /dev/null
@@ -1,12 +0,0 @@
-unsigned long elf_hash(const unsigned char *name)
-{
- unsigned long h=0, g;
-
- while (*name)
- {
- h = (h<<4) + *(name++);
- if (g = h&0xf0000000) h ^= g>>24;
- h &= ~g;
- }
- return h;
-}
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-iscntrl.c b/mdk-stage1/dietlibc/liblatin1/latin1-iscntrl.c
deleted file mode 100644
index b0c3605b0..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-iscntrl.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <ctype.h>
-
-int iscntrl(int c) {
- return (c<32) || (c>=127 && c<=160);
-}
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-isgraph.c b/mdk-stage1/dietlibc/liblatin1/latin1-isgraph.c
deleted file mode 100644
index c8d4a5df0..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-isgraph.c
+++ /dev/null
@@ -1,4 +0,0 @@
-int isgraph(int c) {
- return (c>=33 && c<=126) || (c>=161 && c<=255);
-}
-
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-islower.c b/mdk-stage1/dietlibc/liblatin1/latin1-islower.c
deleted file mode 100644
index cab1a5171..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-islower.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <ctype.h>
-
-int islower(int c) {
- return (c>='a' && c<='z') || (c>=223 && c<=255 && c!=247);
-}
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-isprint.c b/mdk-stage1/dietlibc/liblatin1/latin1-isprint.c
deleted file mode 100644
index f632483a0..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-isprint.c
+++ /dev/null
@@ -1,4 +0,0 @@
-
-int isprint(int c) {
- return (c>=32 && c<=126) || (c>=160 && c<=255);
-}
diff --git a/mdk-stage1/dietlibc/liblatin1/latin1-isupper.c b/mdk-stage1/dietlibc/liblatin1/latin1-isupper.c
deleted file mode 100644
index 1c1d59db8..000000000
--- a/mdk-stage1/dietlibc/liblatin1/latin1-isupper.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <ctype.h>
-
-int isupper(int c) {
- return (c>='A' && c<='Z') || (c>=192 && c<=222 && c!=215);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/CHANGES b/mdk-stage1/dietlibc/libpthread/CHANGES
deleted file mode 100644
index d39d990ba..000000000
--- a/mdk-stage1/dietlibc/libpthread/CHANGES
+++ /dev/null
@@ -1,45 +0,0 @@
-This is the pthread implementation of dietlibc.
-Written from scratch by Olaf Dreesen.
-
-Thu Apr 12 16:47:12 MEST 2001
-
- added conditional variables...
- except pthread_cond_timedwait all should work man-page like
- pthread_cond_timedwait dosen't handle cancel request according to man-page
-
- added thread specific key handling (all according to man-page)
-
-Fri Mar 30 18:47:37 MEST 2001
-
- uff found some logic errors and fixed them.
- pthread_create had a problem with user provided stacks.
-
-
-Fri Mar 23 14:09:54 MET 2001
-
- arg.. the kernel-header are so inconsistent...
- on x86 it works on arm and sparc not due to MISSING defines, miss-places
- includes and __KERNEL__ checks....
- the best in this category is that the kernel-header are changed that the
- buggy (g)libc haven't to change... (f..k glibc, the headers HAVE to be
- CONSISTENT)
- a public defined symbol on arch X have to be in Y to unless marked...
- that is mainly speaking SCHED.H ! arg....
-
-
-Wed Mar 14 04:28:45 MET 2001
-
- I have implemented the "Manager Thread" so that nested thread creation
- works. really ugly stuff... don't look at it unless you're sitting on solid
- ground.
-
-
-Mon Mar 12 16:16:00 CET 2001
-
- first of all:
- I strongly suggest NOT to use it yet, it's very, very, ... very
- experimental. I guess you got the point. there is still much debug code,
- incomplete functions and unusable states....
-
- I'm still working on the final alpha...
-
diff --git a/mdk-stage1/dietlibc/libpthread/Makefile b/mdk-stage1/dietlibc/libpthread/Makefile
deleted file mode 100644
index 06420f43a..000000000
--- a/mdk-stage1/dietlibc/libpthread/Makefile
+++ /dev/null
@@ -1,139 +0,0 @@
-all: libpthread.a
-
-ARCH=$(shell uname -m | sed 's/i[4-9]86/i386/')
-
-CFLAGS=-pipe
-CROSS=
-
-CC=gcc
-
-VPATH=../$(ARCH)/
-
-PTHREAD_OBJS = \
- __testandset.o \
- \
- thread_internal.o \
- thread_key.o \
- \
- pthread_once.o pthread_spinlock.o \
- \
- pthread_create.o pthread_detach.o \
- pthread_join.o pthread_self.o \
- pthread_exit.o \
- \
- pthread_cleanup_push.o \
- pthread_cleanup_pop.o \
- \
- pthread_attr_getdetachstate.o \
- pthread_attr_getinheritsched.o \
- pthread_attr_getschedparam.o \
- pthread_attr_getschedpolicy.o \
- pthread_attr_getscope.o \
- pthread_attr_getstackaddr.o \
- pthread_attr_getstacksize.o \
- pthread_attr_init.o \
- pthread_attr_setdetachstate.o \
- pthread_attr_setinheritsched.o \
- pthread_attr_setschedparam.o \
- pthread_attr_setschedpolicy.o \
- pthread_attr_setscope.o \
- pthread_attr_setstackaddr.o \
- pthread_attr_setstacksize.o \
- \
- pthread_cancel.o pthread_setcancelstate.o \
- pthread_setcanceltype.o pthread_testcancel.o \
- \
- pthread_mutex_init.o \
- pthread_mutex_destroy.o \
- pthread_mutex_lock.o \
- pthread_mutex_trylock.o \
- pthread_mutex_unlock.o \
- \
- pthread_mutexattr_getkind_np.o \
- pthread_mutexattr_init.o \
- pthread_mutexattr_setkind_np.o \
- \
- pthread_condattr.o \
- pthread_cond_broadcast.o \
- pthread_cond_destroy.o \
- pthread_cond_init.o \
- pthread_cond_signal.o \
- pthread_cond_timedwait.o \
- pthread_cond_wait.o \
- \
- pthread_key_create.o \
- pthread_key_delete.o \
- pthread_getspecific.o \
- pthread_setspecific.o \
- \
- pthread_atfork.o \
- pthread_sys_alloc.o \
- pthread_sys_close.o \
- pthread_sys_create.o \
- pthread_sys_fcntl.o \
- pthread_sys_fsync.o \
- pthread_sys_nanosleep.o \
- pthread_sys_logging.o \
- pthread_sys_open.o \
- pthread_sys_pause.o \
- pthread_sys_read.o \
- pthread_sys_sigsuspend.o \
- pthread_sys_tcdrain.o \
- pthread_sys_waitpid.o \
- pthread_sys_write.o
-
-%.o : %.c
- $(CC) $(CFLAGS) -c -o $@ $?
-
-include ../$(ARCH)/Makefile.add
-
-ifeq ($(CFLAGS),-pipe)
-CFLAGS+=-O -fomit-frame-pointer
-endif
-
-#CFLAGS = -g
-CFLAGS += -Wall
-
-CFLAGS += -I.. -I../include -Wall
-
-PWD=$(shell pwd)
-
-.SUFFIXES:
-.SUFFIXES: .S .c
-
-% :: %,v
-
-%.o: %.S
- $(CROSS)$(CC) -I. -Iinclude $(CFLAGS) -c $<
-
-%.o: %.c
- $(CROSS)$(CC) -I. -Iinclude $(CFLAGS) -c $<
-# $(CROSS)strip -x -R .comment -R .note $@
-
-libpthread.a: $(PTHREAD_OBJS)
- ar cr $@ $^
-
-libpthread.so: libpthread.a
- $(CROSS)ld -whole-archive -shared -o $@ $^
-
-
-clean:
- $(RM) *.o *.a *.so *.out *~
-
-exports: libpthread.a
- nm -g libpthread.a | grep -w T | awk '{ print $$3 }' | sort -u > exports
-
-.PHONY: test.out
-
-test.out: test.o libpthread.a $(LIBS)
- $(CROSS)$(CC) -g $(CFLAGS) -nostdlib ../bin-$(ARCH)/start.o -o $@ $^ ../bin-$(ARCH)/dietlibc.a -lgcc
-
-
-.PHONY: sparc ppc mips arm alpha i386
-
-sparc ppc alpha i386:
- $(MAKE) ARCH=$@ CROSS=$@-linux- all t libdietc.so
-
-mips arm:
- $(MAKE) ARCH=$@ CROSS=$@-linux-gnu- all t libdietc.so
-
diff --git a/mdk-stage1/dietlibc/libpthread/README b/mdk-stage1/dietlibc/libpthread/README
deleted file mode 100644
index 3139c731d..000000000
--- a/mdk-stage1/dietlibc/libpthread/README
+++ /dev/null
@@ -1,42 +0,0 @@
-LIBPTHREAD
-
- This is the pthread implementation of dietlibc.
- Written from scratch by Olaf Dreesen.
-
-1. STATUS: incomplete but should work (or not... I had a lot of heisen-bugs...)
- On non i386 archs the kernel header have major differences...
- NO workaround yet for this problems...
-
-It's like linuxthreads a clone base thread implementation.
-
-I have implemented a "Manager Thread" with all the pain it involves...
-Nested thread creation is now working fine...
-
-
-2. HOW-TO make this lib:
-
- 1. generate the dietlibc in the parent directory.
- and make sure you have WANT_THREAD_SAVE active in the file:
- dietfeatures.h
-
- 2. change back here and type make
-
- and then you should have a libpthread.a
-
-
-3. NOTES
-
-NON STANDARD SIGNAL HANDLING for the threads:
-
- SIGHUP the targeted thread is canceled
- depends on the cancel type of the thread.
-
- ASYNCHRONOUS: the signal handler will KILL the thread immediately.
-
- DEFERRED: the signal handler mark its thread as canceled.
- (only for the sig-handler to do some sane stuff...)
-
- SIGTERM the thread is KILLED
- if the thread signaled is the main thread, then ALL child-threads
- will get a SIGHUP and after some micros a SIGTERM....
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_atfork.c b/mdk-stage1/dietlibc/libpthread/pthread_atfork.c
deleted file mode 100644
index 2dc612dcc..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_atfork.c
+++ /dev/null
@@ -1,77 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-#define PTHREAD_NUM_ATFORK 4
-
-static struct _pthread_fastlock __atfork_struct_lock;
-static struct {
- int used;
- void (*prepare)(void);
- void (*parent)(void);
- void (*child)(void);
-} pthread_atfork_buf[PTHREAD_NUM_ATFORK];
-
-int pthread_atfork(void (*prepare)(void),
- void (*parent)(void),
- void (*child)(void))
-{
- int i,ret=-1;
-
- __NO_ASYNC_CANCEL_BEGIN;
- __pthread_lock(&__atfork_struct_lock);
-
- for (i=0;i<PTHREAD_NUM_ATFORK; ++i) {
- if (!(pthread_atfork_buf[i].used)) {
- pthread_atfork_buf[i].prepare=prepare;
- pthread_atfork_buf[i].parent=parent;
- pthread_atfork_buf[i].child=child;
- ret=0;
- break;
- }
- }
-
- __pthread_unlock(&__atfork_struct_lock);
- __NO_ASYNC_CANCEL_END;
-
- if (ret) (*(__errno_location()))=ENOMEM;
- return ret;
-}
-
-pid_t fork(void)
-{
- pid_t pid;
- int i=PTHREAD_NUM_ATFORK;
-
- __NO_ASYNC_CANCEL_BEGIN;
-
- __TEST_CANCEL();
- __pthread_lock(&__atfork_struct_lock);
-
- while (i) {
- if (pthread_atfork_buf[--i].used)
- if (pthread_atfork_buf[i].prepare)
- pthread_atfork_buf[i].prepare();
- }
-
- pid=__libc_fork();
-
- if (pid>0) { /* parent */
- for (i=0;i<PTHREAD_NUM_ATFORK;++i)
- if (pthread_atfork_buf[i].used)
- if (pthread_atfork_buf[i].parent)
- pthread_atfork_buf[i].parent();
- } else if (pid==0) { /* child */
- for (i=0;i<PTHREAD_NUM_ATFORK;++i)
- if (pthread_atfork_buf[i].used)
- if (pthread_atfork_buf[i].child)
- pthread_atfork_buf[i].child();
- }
-
- __pthread_unlock(&__atfork_struct_lock);
- __NO_ASYNC_CANCEL_END;
-
- return pid;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getdetachstate.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getdetachstate.c
deleted file mode 100644
index ccdfc0e47..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getdetachstate.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getdetachstate(const pthread_attr_t *attr, int *detachstate)
-{
- __THREAD_INIT();
-
- *detachstate=attr->__detachstate;
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getinheritsched.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getinheritsched.c
deleted file mode 100644
index 314fd8ade..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getinheritsched.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getinheritsched(const pthread_attr_t *attr, int *inherit)
-{
- __THREAD_INIT();
-
- *inherit = attr->__inheritsched;
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedparam.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedparam.c
deleted file mode 100644
index f0a9a07d1..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedparam.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getschedparam(const pthread_attr_t *attr, struct sched_param *param)
-{
- __THREAD_INIT();
-
- param->sched_priority=attr->__schedparam.sched_priority;
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedpolicy.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedpolicy.c
deleted file mode 100644
index 53f1bed8c..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getschedpolicy.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getschedpolicy(const pthread_attr_t *attr, int *policy)
-{
- __THREAD_INIT();
-
- *policy = attr->__schedpolicy;
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getscope.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getscope.c
deleted file mode 100644
index 99a33110d..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getscope.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getscope(const pthread_attr_t *attr, int *scope)
-{
- __THREAD_INIT();
-
- *scope=PTHREAD_SCOPE_SYSTEM;
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getstackaddr.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getstackaddr.c
deleted file mode 100644
index d71421901..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getstackaddr.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getstackaddr(pthread_attr_t *attr, void **stack)
-{
- __THREAD_INIT();
-
- *stack=attr->__stackaddr;
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_getstacksize.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_getstacksize.c
deleted file mode 100644
index 4785979a0..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_getstacksize.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_getstacksize(pthread_attr_t *attr, size_t *stacksize)
-{
- __THREAD_INIT();
-
- *stacksize=attr->__stacksize;
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_init.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_init.c
deleted file mode 100644
index 726e88fe5..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_init.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_init(pthread_attr_t *attr)
-{
- __THREAD_INIT();
-
- memset(attr,0,sizeof(pthread_attr_t));
- attr->__stacksize=PTHREAD_STACK_SIZE;
- return 0;
-}
-
-int pthread_attr_destroy(pthread_attr_t *attr) __attribute__((alias("pthread_attr_init")));
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setdetachstate.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setdetachstate.c
deleted file mode 100644
index 690ad5f8e..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setdetachstate.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setdetachstate(pthread_attr_t *attr, int detachstate)
-{
- __THREAD_INIT();
-
- if ((detachstate == PTHREAD_CREATE_JOINABLE) ||
- (detachstate == PTHREAD_CREATE_DETACHED)) {
- attr->__detachstate=detachstate;
- return 0;
- }
- (*(__errno_location()))=EINVAL;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setinheritsched.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setinheritsched.c
deleted file mode 100644
index f38e6e35e..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setinheritsched.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setinheritsched(pthread_attr_t *attr, int inherit)
-{
- __THREAD_INIT();
-
- if ((inherit==PTHREAD_INHERIT_SCHED) ||
- (inherit==PTHREAD_EXPLICIT_SCHED)) {
- attr->__inheritsched=inherit;
- return 0;
- }
- (*(__errno_location()))=EINVAL;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedparam.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedparam.c
deleted file mode 100644
index 833c0111b..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedparam.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setschedparam(pthread_attr_t *attr, const struct sched_param *param)
-{
- __THREAD_INIT();
-
- if ((attr->__schedpolicy == SCHED_OTHER) && (param->sched_priority == 0)) {
- attr->__schedparam.sched_priority=0;
- return 0;
- }
- if (((attr->__schedpolicy == SCHED_RR) || (attr->__schedpolicy == SCHED_RR))
- && ((param->sched_priority > 0) && (param->sched_priority < 100))) {
- attr->__schedparam.sched_priority=param->sched_priority;
- return 0;
- }
- (*(__errno_location()))=EINVAL;
- return -1;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedpolicy.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedpolicy.c
deleted file mode 100644
index e845bca32..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setschedpolicy.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setschedpolicy(pthread_attr_t *attr, int policy)
-{
- __THREAD_INIT();
-
- if (policy==SCHED_OTHER) {
- attr->__schedpolicy=policy;
- return 0;
- }
- if ((policy==SCHED_FIFO) || (policy==SCHED_RR)) {
- if (geteuid()==0) {
- attr->__schedpolicy=policy;
- return 0;
- }
- (*(__errno_location()))=ENOTSUP;
- }
- else
- (*(__errno_location()))=EINVAL;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setscope.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setscope.c
deleted file mode 100644
index 39088c9b2..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setscope.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setscope(pthread_attr_t *attr, int scope)
-{
- __THREAD_INIT();
-
- if (scope==PTHREAD_SCOPE_SYSTEM) return 0;
-
- if (scope==PTHREAD_SCOPE_PROCESS)
- (*(__errno_location()))=ENOTSUP;
- else
- (*(__errno_location()))=EINVAL;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setstackaddr.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setstackaddr.c
deleted file mode 100644
index 4b320cd9d..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setstackaddr.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setstackaddr(pthread_attr_t *attr, void *stack)
-{
- __THREAD_INIT();
-
- attr->__stackaddr=stack;
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_attr_setstacksize.c b/mdk-stage1/dietlibc/libpthread/pthread_attr_setstacksize.c
deleted file mode 100644
index cfbab7747..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_attr_setstacksize.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_attr_setstacksize(pthread_attr_t *attr, size_t stacksize)
-{
- __THREAD_INIT();
-
- if (stacksize>=PTHREAD_STACK_SIZE) {
- attr->__stacksize=stacksize;
- return 0;
- }
- (*(__errno_location()))=EINVAL;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cancel.c b/mdk-stage1/dietlibc/libpthread/pthread_cancel.c
deleted file mode 100644
index 4c87a3ed1..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cancel.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cancel(pthread_t th)
-{
- pthread_t j;
- _pthread_descr thread;
-
- __THREAD_INIT();
-
- j=__find_thread_id(th);
-
- if (j==-1) {
- (*(__errno_location()))=ESRCH;
- return -1;
- }
- thread = __get_thread_struct(j);
-
- if (thread==0) {
- (*(__errno_location()))=ESRCH;
- return -1;
- }
-
- if (thread->cancelstate!=PTHREAD_CANCEL_DISABLE) {
- thread->canceled=1;
- if (thread->canceltype!=PTHREAD_CANCEL_DEFERRED) {
- kill(thread->pid,SIGHUP);
- }
- }
-
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cleanup_pop.c b/mdk-stage1/dietlibc/libpthread/pthread_cleanup_pop.c
deleted file mode 100644
index 641bb6083..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cleanup_pop.c
+++ /dev/null
@@ -1,27 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-void pthread_cleanup_pop(int execute)
-{
- _pthread_descr this;
- struct thread_cleanup_t tmp;
- int i=PTHREAD_MAX_CLEANUP;
-
- __THREAD_INIT();
-
- this = __thread_self();
-
- while(i>0) {
- if (this->cleanup_stack[--i].func) {
- tmp.func=this->cleanup_stack[i].func;
- tmp.arg=this->cleanup_stack[i].arg;
- this->cleanup_stack[i].func=0;
- break;
- }
- }
-
- if (execute) tmp.func(tmp.arg);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cleanup_push.c b/mdk-stage1/dietlibc/libpthread/pthread_cleanup_push.c
deleted file mode 100644
index cd2aabf71..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cleanup_push.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-void pthread_cleanup_push(void (*func)(void*), void *arg)
-{
- _pthread_descr this;
- int i;
-
- __THREAD_INIT();
-
- this = __thread_self();
-
- for (i=0; i<PTHREAD_MAX_CLEANUP; ++i) {
- if (this->cleanup_stack[i].func==0) {
- this->cleanup_stack[i].func=func;
- this->cleanup_stack[i].arg=arg;
- break;
- }
- }
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_broadcast.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_broadcast.c
deleted file mode 100644
index d3c2274f3..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_broadcast.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_broadcast(pthread_cond_t *cond)
-{
- _pthread_descr tmp;
-
- __THREAD_INIT();
-
- __pthread_lock(&(cond->lock));
- while ((tmp=cond->wait_chain)) {
- cond->wait_chain=tmp->waitnext;
- tmp->waitnext=0;
- tmp->waiting=0;
- }
- __pthread_unlock(&(cond->lock));
-
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_destroy.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_destroy.c
deleted file mode 100644
index 9a6cc4f0b..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_destroy.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_destroy(pthread_cond_t *cond)
-{
- __THREAD_INIT();
-
- if (cond->wait_chain) {
- (*__errno_location())=EBUSY;
- return 1;
- }
-
- memset(cond,0,sizeof(pthread_cond_t));
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_init.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_init.c
deleted file mode 100644
index 20b38bef2..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_init.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_init(pthread_cond_t *cond, pthread_condattr_t *cond_attr)
-{
- __THREAD_INIT();
-
- memset(cond,0,sizeof(pthread_cond_t));
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_signal.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_signal.c
deleted file mode 100644
index 60bf2119c..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_signal.c
+++ /dev/null
@@ -1,24 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_signal(pthread_cond_t *cond)
-{
- _pthread_descr tmp=0;
-
- __THREAD_INIT();
-
- __pthread_lock(&(cond->lock));
- if ((tmp=cond->wait_chain)) cond->wait_chain=tmp->waitnext;
- __pthread_unlock(&(cond->lock));
-
- if (tmp) {
- tmp->waitnext=0;
- tmp->waiting=0;
- }
-
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_timedwait.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_timedwait.c
deleted file mode 100644
index 6613f2ca9..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_timedwait.c
+++ /dev/null
@@ -1,43 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_timedwait(pthread_cond_t *cond, pthread_mutex_t *mutex,
- const struct timespec *abstime)
-{
- _pthread_descr tmp;
- _pthread_descr this;
- int ret;
-
- __THREAD_INIT();
-
- this=__thread_self();
-
- /* put in wait-chain */
- __pthread_lock(&(cond->lock));
- this->waiting=1;
- if (cond->wait_chain) {
- for(tmp=cond->wait_chain;tmp->waitnext;tmp=tmp->waitnext);
- tmp->waitnext=this;
- } else cond->wait_chain=this;
- __pthread_unlock(&(cond->lock));
-
- /* Aeh yeah / wait till signal */
- pthread_mutex_unlock(mutex);
- ret=nanosleep(abstime,0);
- pthread_mutex_lock(mutex);
-
- __TEST_CANCEL();
-
- if (ret) {
- if ((*__errno_location())!=EINTR) return -1;
- return 0;
- }
-
- (*__errno_location())=ETIMEDOUT;
- return -1;
-}
-
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_cond_wait.c b/mdk-stage1/dietlibc/libpthread/pthread_cond_wait.c
deleted file mode 100644
index 0c6c0ae13..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_cond_wait.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_cond_wait(pthread_cond_t *cond, pthread_mutex_t *mutex)
-{
- _pthread_descr tmp;
- _pthread_descr this;
-
- __THREAD_INIT();
-
- this=__thread_self();
-
- /* put in wait-chain */
- __pthread_lock(&(cond->lock));
- this->waiting=1;
- if (cond->wait_chain) {
- for(tmp=cond->wait_chain;tmp->waitnext;tmp=tmp->waitnext);
- tmp->waitnext=this;
- } else cond->wait_chain=this;
- __pthread_unlock(&(cond->lock));
-
- /* Aeh yeah / wait till signal */
- pthread_mutex_unlock(mutex);
- while (this->waiting) {
- __thread_wait_some_time();
- if (this->canceled) this->waiting=0; /* we got a cancel signal */
- }
- pthread_mutex_lock(mutex);
-
- __TEST_CANCEL();
- return 0;
-}
-
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_condattr.c b/mdk-stage1/dietlibc/libpthread/pthread_condattr.c
deleted file mode 100644
index c537890ba..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_condattr.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <pthread.h>
-
-int pthread_condattr_init(pthread_condattr_t *attr)
-{
- return 0;
-}
-
-int pthread_condattr_destroy(pthread_condattr_t *attr)
-__attribute__((alias("pthread_condattr_init")));
-
-int pthread_condattr_getpshared(const pthread_condattr_t *attr, int *pshared)
-__attribute__((alias("pthread_condattr_init")));
-
-int pthread_condattr_setpshared(pthread_condattr_t *attr, int pshared)
-__attribute__((alias("pthread_condattr_init")));
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_create.c b/mdk-stage1/dietlibc/libpthread/pthread_create.c
deleted file mode 100644
index b4a499081..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_create.c
+++ /dev/null
@@ -1,76 +0,0 @@
-#include <unistd.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_create (pthread_t *thread, const pthread_attr_t *attr,
- void *(*start_routine) (void *), void *arg)
-{
- int ret=0;
- _pthread_descr td;
- pthread_attr_t default_attr;
-
- __THREAD_INIT();
-
- if (start_routine==0) {
- (*(__errno_location()))=EINVAL;
- return -1;
- }
-
- td = __thread_get_free();
-
- if (td) {
- if (!(attr)) {
- pthread_attr_init(&default_attr);
- attr=&default_attr;
- }
-
- if ((td->policy!=SCHED_OTHER)&&(td->priority==0)) {
- (*(__errno_location()))=EINVAL;
- return -1;
- }
-
- if (attr->__inheritsched==PTHREAD_INHERIT_SCHED) {
- _pthread_descr this = __thread_self();
- td->policy = this->policy;
- td->priority = this->priority;
- } else {
- td->policy = attr->__schedpolicy;
- td->priority = attr->__schedparam.sched_priority;
- }
-
- td->func = start_routine;
- td->arg = arg;
-
- td->detached = attr->__detachstate;
-
- td->stack_size = attr->__stacksize;
-
- if (!(td->stack_addr)) {
- char *stack=(char*)malloc(td->stack_size);
- if (!(stack)) {
- (*(__errno_location()))=EINVAL;
- return -1;
- }
- td->stack_begin = stack;
- td->stack_addr = stack+td->stack_size;
- } else {
- td->stack_begin = 0;
- td->stack_addr = attr->__stackaddr;
- }
-
- ret = signal_manager_thread(td);
-
- if (ret>1)
- *thread=ret;
- else
- __thread_cleanup(td);
- }
- else
- (*(__errno_location()))=EAGAIN;
-
- if (ret<2) return -1;
- return ret;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_detach.c b/mdk-stage1/dietlibc/libpthread/pthread_detach.c
deleted file mode 100644
index c07280389..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_detach.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_detach(pthread_t th)
-{
- pthread_t j;
- _pthread_descr thread;
-
- __THREAD_INIT();
-
- j=__find_thread_id(th);
-
- if (j==-1) {
- (*(__errno_location()))=ESRCH;
- return -1;
- }
- thread = __get_thread_struct(j);
-
- if (thread==0) {
- (*(__errno_location()))=ESRCH;
- return -1;
- }
-
- if (thread->detached) {
- (*(__errno_location()))=EINVAL;
- return -1;
- }
-
- if (!thread->joined) {
- thread->detached=1;
- }
-
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_exit.c b/mdk-stage1/dietlibc/libpthread/pthread_exit.c
deleted file mode 100644
index 41eac0a33..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_exit.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-void pthread_exit(void *retval)
-{
- _pthread_descr this;
-
- __THREAD_INIT();
-
- this = __thread_self();
- this->retval = retval;
-
- longjmp(this->jmp_exit,1);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_getspecific.c b/mdk-stage1/dietlibc/libpthread/pthread_getspecific.c
deleted file mode 100644
index c2f84c814..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_getspecific.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-extern struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-const void *pthread_getspecific(pthread_key_t key)
-{
- int id;
- __THREAD_INIT();
-
- id=__find_thread_id(getpid());
-
- if ((key<PTHREAD_KEYS_MAX) && (__thread_keys[key].used)) {
- return __thread_keys[key].tkd[id];
- }
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_join.c b/mdk-stage1/dietlibc/libpthread/pthread_join.c
deleted file mode 100644
index 5b295bad1..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_join.c
+++ /dev/null
@@ -1,50 +0,0 @@
-#include <unistd.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#include "thread_internal.h"
-#include <pthread.h>
-
-int pthread_join(pthread_t th, void **thread_return)
-{
- pthread_t j;
- _pthread_descr this, thread;
-
- __THREAD_INIT();
-
- this = __thread_self();
- j=__find_thread_id(th);
-
- if (j==-1) {
- (*(__errno_location()))=ESRCH;
- return -1;
- }
-
- thread = __get_thread_struct(j);
-
- /* error handling */
- if (thread==0) {
- (*(__errno_location()))=ESRCH;
- return -1;
- }
-
- if (this==thread) {
- (*(__errno_location()))=EDEADLK;
- return -1;
- }
-
- if (thread->detached || thread->joined) {
- (*(__errno_location()))=EINVAL;
- return -1;
- }
-
- thread->joined=this;
- this->join=1;
-
- while(this->join) __thread_wait_some_time();
-
- if (thread_return) *thread_return=this->retval;
-
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_key_create.c b/mdk-stage1/dietlibc/libpthread/pthread_key_create.c
deleted file mode 100644
index 44fccea6a..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_key_create.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-extern struct _pthread_fastlock __thread_keys_lock;
-extern struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-int pthread_key_create(pthread_key_t *key, void (*destructor)(const void*))
-{
- int ret=-1,i;
-
- __THREAD_INIT();
-
- __NO_ASYNC_CANCEL_BEGIN;
- __pthread_lock(&__thread_keys_lock);
-
- for (i=0; i<PTHREAD_KEYS_MAX; i++) {
- if (!__thread_keys[i].used) {
- __thread_keys[i].used=1;
- __thread_keys[i].destructor=destructor;
- memset(__thread_keys[i].tkd,0,PTHREAD_THREADS_MAX*sizeof(struct _thread_key));
- *key=i;
- ret=0;
- break;
- }
- }
-
- __pthread_unlock(&__thread_keys_lock);
- __NO_ASYNC_CANCEL_END;
-
- if (ret) (*__errno_location())=EAGAIN;
- return ret;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_key_delete.c b/mdk-stage1/dietlibc/libpthread/pthread_key_delete.c
deleted file mode 100644
index b1bc366e2..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_key_delete.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-extern struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-int pthread_key_delete(pthread_key_t key)
-{
- __THREAD_INIT();
-
- if (key>=PTHREAD_KEYS_MAX) {
- (*__errno_location())=EINVAL;
- return -1;
- }
-
- __thread_keys[key].used=0;
-
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_destroy.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_destroy.c
deleted file mode 100644
index 33a16abd4..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_destroy.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutex_destroy(pthread_mutex_t *mutex)
-{
- __THREAD_INIT();
-
- if ((mutex->owner)||(mutex->lock.__spinlock)) {
- (*(__errno_location()))=EBUSY;
- return -1;
- }
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_init.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_init.c
deleted file mode 100644
index b1797fb20..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_init.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutex_init(pthread_mutex_t *mutex,
- const pthread_mutexattr_t *mutexattr)
-{
- __THREAD_INIT();
-
- memset(mutex,0,sizeof(pthread_mutex_t));
- if (mutexattr) {
- mutex->kind=mutexattr->__mutexkind;
- }
- return 0;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_lock.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_lock.c
deleted file mode 100644
index 0c3ade9e8..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_lock.c
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <unistd.h>
-#include <sched.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-/* will never return EINVAL ! */
-
-int pthread_mutex_lock(pthread_mutex_t *mutex)
-{
- _pthread_descr this;
-
- __THREAD_INIT();
-
- this = __thread_self();
-
- if (this!=mutex->owner) {
- /* wait for mutex to free */
- __pthread_lock(&(mutex->lock));
-
- mutex->owner=this;
- }
- else if (mutex->kind==PTHREAD_MUTEX_ERRORCHECK_NP)
- {
- (*(__errno_location()))=EDEADLK;
- return -1;
- }
-
- if (mutex->kind==PTHREAD_MUTEX_RECURSIVE_NP) ++(mutex->count);
-
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_trylock.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_trylock.c
deleted file mode 100644
index fcf63f75e..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_trylock.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <unistd.h>
-#include <sched.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-/* will never return EINVAL ! */
-
-int pthread_mutex_trylock(pthread_mutex_t *mutex)
-{
- _pthread_descr this;
-
- __THREAD_INIT();
-
- this = __thread_self();
-
- if (this!=mutex->owner) {
- /* wait for mutex to free */
- if (__pthread_trylock(&(mutex->lock))) {
- (*(__errno_location()))=EBUSY;
- return -1;
- }
-
- mutex->owner=this;
- }
- else if (mutex->kind==PTHREAD_MUTEX_ERRORCHECK_NP)
- {
- (*(__errno_location()))=EDEADLK;
- return -1;
- }
-
- if (mutex->kind==PTHREAD_MUTEX_RECURSIVE_NP) ++(mutex->count);
-
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutex_unlock.c b/mdk-stage1/dietlibc/libpthread/pthread_mutex_unlock.c
deleted file mode 100644
index 0b5a1d0f7..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutex_unlock.c
+++ /dev/null
@@ -1,34 +0,0 @@
-#include <unistd.h>
-#include <sched.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-/* will never return EINVAL ! */
-
-int pthread_mutex_unlock(pthread_mutex_t *mutex)
-{
- _pthread_descr this;
-
- __THREAD_INIT();
-
- this = __thread_self();
-
- if (this==mutex->owner) {
- if (mutex->kind==PTHREAD_MUTEX_RECURSIVE_NP) {
- if (--(mutex->count))
- return 0;
- }
-
- mutex->owner=0;
- __pthread_unlock(&(mutex->lock));
- }
- else if (mutex->kind==PTHREAD_MUTEX_ERRORCHECK_NP)
- {
- (*(__errno_location()))=EPERM;
- return -1;
- }
-
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_getkind_np.c b/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_getkind_np.c
deleted file mode 100644
index 63cd9133c..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_getkind_np.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutexattr_getkind_np(const pthread_mutexattr_t *attr, int *kind)
-{
- __THREAD_INIT();
-
- *kind=attr->__mutexkind;
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_init.c b/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_init.c
deleted file mode 100644
index ff60e4c74..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_init.c
+++ /dev/null
@@ -1,15 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutexattr_init(pthread_mutexattr_t *attr)
-{
- __THREAD_INIT();
-
- attr->__mutexkind = 0;
- return 0;
-}
-
-int pthread_mutexattr_destroy(pthread_mutexattr_t *attr) __attribute__((alias ("pthread_mutexattr_init")));
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_setkind_np.c b/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_setkind_np.c
deleted file mode 100644
index ac600f8ed..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_mutexattr_setkind_np.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_mutexattr_setkind_np(pthread_mutexattr_t *attr, int kind)
-{
- __THREAD_INIT();
-
- if ((kind==PTHREAD_MUTEX_FAST_NP) || (kind==PTHREAD_MUTEX_RECURSIVE_NP) ||
- (kind==PTHREAD_MUTEX_ERRORCHECK_NP)) {
- attr->__mutexkind=kind;
- return 0;
- }
- (*(__errno_location()))=EINVAL;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_once.c b/mdk-stage1/dietlibc/libpthread/pthread_once.c
deleted file mode 100644
index 16d9cb392..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_once.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <pthread.h>
-#include "thread_internal.h"
-
-int __pthread_once (pthread_once_t* once_control, void (*init_routine)(void))
-{
- if (!(__testandset(once_control))) init_routine();
- return 0;
-}
-int pthread_once (pthread_once_t* once_control, void (*init_routine)(void)) __attribute__((alias("__pthread_once")));
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_self.c b/mdk-stage1/dietlibc/libpthread/pthread_self.c
deleted file mode 100644
index 394686dd4..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_self.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <unistd.h>
-#include <pthread.h>
-
-pthread_t pthread_self() { return getpid(); }
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_setcancelstate.c b/mdk-stage1/dietlibc/libpthread/pthread_setcancelstate.c
deleted file mode 100644
index b906492fb..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_setcancelstate.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_setcancelstate(int state, int *oldstate)
-{
- _pthread_descr thread;
-
- __THREAD_INIT();
-
- if ((state==PTHREAD_CANCEL_ENABLE) || (state==PTHREAD_CANCEL_DISABLE))
- {
- thread = __thread_self();
-
- if (oldstate) *oldstate = thread->cancelstate;
- thread->cancelstate = state;
-
- return 0;
- }
-
- (*(__errno_location()))=EINVAL;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_setcanceltype.c b/mdk-stage1/dietlibc/libpthread/pthread_setcanceltype.c
deleted file mode 100644
index 03d1f53de..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_setcanceltype.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pthread_setcanceltype(int type, int *oldtype)
-{
- _pthread_descr thread;
-
- __THREAD_INIT();
-
- if ((type==PTHREAD_CANCEL_DEFERRED) || (type==PTHREAD_CANCEL_ASYNCHRONOUS))
- {
- thread = __thread_self();
-
- if (oldtype) *oldtype = thread->canceltype;
- thread->canceltype = type;
-
- return 0;
- }
-
- (*(__errno_location()))=EINVAL;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_setspecific.c b/mdk-stage1/dietlibc/libpthread/pthread_setspecific.c
deleted file mode 100644
index 78339c20b..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_setspecific.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-extern struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-int pthread_setspecific(pthread_key_t key, const void *value)
-{
- int id;
- __THREAD_INIT();
-
- id=__find_thread_id(getpid());
- if ((key<PTHREAD_KEYS_MAX) && (__thread_keys[key].used)) {
- __thread_keys[key].tkd[id]=value;
- return 0;
- }
- (*__errno_location())=EINVAL;
- return -1;
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_spinlock.c b/mdk-stage1/dietlibc/libpthread/pthread_spinlock.c
deleted file mode 100644
index 449782adf..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_spinlock.c
+++ /dev/null
@@ -1,38 +0,0 @@
-#include <time.h>
-#include <pthread.h>
-#include "thread_internal.h"
-
-static void __pthread_acquire(int * spinlock)
-{
- int cnt = 0;
- struct timespec tm;
-
- while (__testandset(spinlock)) {
- if (cnt < MAX_SPIN_COUNT) {
- sched_yield();
- cnt++;
- } else {
- tm.tv_sec = 0;
- tm.tv_nsec = SPIN_SLEEP_DURATION;
- __libc_nanosleep(&tm, 0);
- cnt = 0;
- }
- }
-}
-
-void __pthread_lock(struct _pthread_fastlock * lock)
-{
- __pthread_acquire(&lock->__spinlock);
-}
-
-int __pthread_trylock(struct _pthread_fastlock * lock)
-{
- return __testandset(&lock->__spinlock);
-}
-
-int __pthread_unlock(struct _pthread_fastlock * lock)
-{
- return (lock->__spinlock = 0);
-}
-
-
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_alloc.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_alloc.c
deleted file mode 100644
index 9f7d23d79..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_alloc.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-static pthread_mutex_t mutex_alloc = PTHREAD_MUTEX_INITIALIZER;
-
-void free(void *ptr)
-{
- __NO_ASYNC_CANCEL_BEGIN;
- pthread_mutex_lock(&mutex_alloc);
- __libc_free(ptr);
- pthread_mutex_unlock(&mutex_alloc);
- __NO_ASYNC_CANCEL_END;
-}
-
-void *malloc(size_t size)
-{
- register void *ret;
- __NO_ASYNC_CANCEL_BEGIN;
- pthread_mutex_lock(&mutex_alloc);
- ret=__libc_malloc(size);
- pthread_mutex_unlock(&mutex_alloc);
- __NO_ASYNC_CANCEL_END;
- return ret;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_close.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_close.c
deleted file mode 100644
index 84d5d5f36..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_close.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int close(int fd)
-{
- __TEST_CANCEL();
- return __libc_close(fd);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_create.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_create.c
deleted file mode 100644
index 9d47844f5..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_create.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int creat(const char *pathname, mode_t mode)
-{
- __TEST_CANCEL();
- return __libc_creat(pathname,mode);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_fcntl.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_fcntl.c
deleted file mode 100644
index 99210a488..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_fcntl.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int fcntl(int fd, int cmd, void *arg)
-{
- __TEST_CANCEL();
- return __libc_fcntl(fd,cmd,arg);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_fsync.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_fsync.c
deleted file mode 100644
index a2c995069..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_fsync.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int fsync(int fd)
-{
- __TEST_CANCEL();
- return __libc_fsync(fd);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_logging.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_logging.c
deleted file mode 100644
index 6070ad219..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_logging.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <unistd.h>
-#include <stdarg.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-static pthread_mutex_t mutex_syslog = PTHREAD_MUTEX_INITIALIZER;
-
-void closelog(void)
-{
- pthread_cleanup_push((void(*)(void*))pthread_mutex_unlock,&mutex_syslog);
- pthread_mutex_lock(&mutex_syslog);
- __libc_closelog();
- pthread_cleanup_pop(1);
-}
-
-void openlog(const char *ident, int option, int facility)
-{
- pthread_cleanup_push((void(*)(void*))pthread_mutex_unlock,&mutex_syslog);
- pthread_mutex_lock(&mutex_syslog);
- __libc_openlog(ident, option, facility);
- pthread_cleanup_pop(1);
-}
-
-void vsyslog(int priority, const char *format, va_list arg_ptr)
-{
- pthread_cleanup_push((void(*)(void*))pthread_mutex_unlock,&mutex_syslog);
- pthread_mutex_lock(&mutex_syslog);
- __libc_vsyslog(priority, format, arg_ptr);
- pthread_cleanup_pop(1);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_nanosleep.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_nanosleep.c
deleted file mode 100644
index 699de4654..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_nanosleep.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <time.h>
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int nanosleep(const struct timespec *req, struct timespec *rem)
-{
- __TEST_CANCEL();
- return __libc_nanosleep(req,rem);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_open.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_open.c
deleted file mode 100644
index 513f6a323..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_open.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int __pthread_open(const char *pathname, int flags, mode_t mode)
-{
- __TEST_CANCEL();
- return __libc_open(pathname,flags,mode);
-}
-
-int open(const char *pathname, int flags, ...) __attribute__((alias("__pthread_open")));
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_pause.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_pause.c
deleted file mode 100644
index ab15ead11..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_pause.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int pause()
-{
- __TEST_CANCEL();
- return __libc_pause();
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_read.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_read.c
deleted file mode 100644
index 60f886003..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_read.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int read(int fd, void *buf, size_t count)
-{
- __TEST_CANCEL();
- return __libc_read(fd,buf,count);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_sigsuspend.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_sigsuspend.c
deleted file mode 100644
index 72cd783ae..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_sigsuspend.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int sigsuspend(const sigset_t *mask)
-{
- __TEST_CANCEL();
- return __libc_sigsuspend(mask);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_tcdrain.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_tcdrain.c
deleted file mode 100644
index 1ac33adfc..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_tcdrain.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int tcdrain(int fd)
-{
- __TEST_CANCEL();
- return __libc_tcdrain(fd);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_waitpid.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_waitpid.c
deleted file mode 100644
index 76d5ddca7..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_waitpid.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-pid_t waitpid(pid_t pid, int *status, int options)
-{
- __TEST_CANCEL();
- return __libc_waitpid(pid,status,options);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_sys_write.c b/mdk-stage1/dietlibc/libpthread/pthread_sys_write.c
deleted file mode 100644
index 37541ae42..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_sys_write.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <unistd.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-int write(int fd, const void *buf, size_t count)
-{
- __TEST_CANCEL();
- return __libc_write(fd,buf,count);
-}
diff --git a/mdk-stage1/dietlibc/libpthread/pthread_testcancel.c b/mdk-stage1/dietlibc/libpthread/pthread_testcancel.c
deleted file mode 100644
index 68f91e743..000000000
--- a/mdk-stage1/dietlibc/libpthread/pthread_testcancel.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-void pthread_testcancel()
-{
- _pthread_descr thread;
- __THREAD_INIT();
-
- thread=__thread_self();
-
- if (thread->canceled) {
- pthread_exit(PTHREAD_CANCELED);
- }
-}
diff --git a/mdk-stage1/dietlibc/libpthread/test.c b/mdk-stage1/dietlibc/libpthread/test.c
deleted file mode 100644
index 3272c1753..000000000
--- a/mdk-stage1/dietlibc/libpthread/test.c
+++ /dev/null
@@ -1,72 +0,0 @@
-#include <stdio.h>
-#include <pthread.h>
-
-#include <unistd.h>
-#include <signal.h>
-
-#include <errno.h>
-
-int ra;
-
-void test(int sig)
-{
- printf("SIGNAL %d in %d\n",sig,getpid());
- fflush(stdout);
- signal(SIGHUP, test);
-}
-
-void* thread(void* arg)
-{
- int i;
- for (i=0;i<10; i++)
- {
- printf("child %ld %8p\n", pthread_self(),arg);
- sleep(1);
- }
- return arg;
-}
-
-void* thread2(void *arg)
-{
- pthread_t t;
- int i;
-
- printf("child %ld %8p\n", pthread_self(),arg);
- for (i=0; i<3; ++i) {
- printf("child starting next in %d secs %ld %8p\n", 3-i, pthread_self(),arg);
- sleep(1);
- }
- pthread_create(&t,0, thread, (void*)2);
- printf("new child @ %ld\n",t);
- return (void*)t;
-}
-
-int main(int argc, char*argv[])
-{
- pthread_t t;
-
- signal(SIGHUP, test);
-
- pthread_create(&t,0, thread2, 0);
- pthread_create(&t,0, thread, (void *)3);
- pthread_create(&t,0, thread, (void *)1);
-
- puts("main");
-
-#if 0
- {
- int i;
- for(i=0;i<4;i++) sleep(1);
- }
-#else
- {
- int *tt;
- int i = pthread_join(t,(void*)&tt);
- printf("join %d %p %d\n",i,tt,(*(__errno_location())));
- }
-#endif
-
- puts("main exit");
-
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libpthread/thread_internal.c b/mdk-stage1/dietlibc/libpthread/thread_internal.c
deleted file mode 100644
index a93806203..000000000
--- a/mdk-stage1/dietlibc/libpthread/thread_internal.c
+++ /dev/null
@@ -1,344 +0,0 @@
-#include <signal.h>
-#include <string.h>
-#include <sys/wait.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#include <sched.h>
-#include <sys/resource.h>
-
-#include <stdio.h>
-#include "thread_internal.h"
-
-static struct _pthread_fastlock __thread_struct_lock = {0};
-static struct _pthread_descr_struct threads[PTHREAD_THREADS_MAX];
-static int _max_used_thread_id=1;
-pthread_once_t __thread_inited;
-
-static struct _pthread_fastlock __manager_thread_signal_lock = {0};
-static struct _pthread_fastlock __manager_thread_data_lock = {1};
-static struct _pthread_fastlock __manager_thread_data_go_lock = {1};
-
-//#define DEBUG
-
-/* find thread */
-int __find_thread_id(int pid)
-{
- register int i;
- for (i=0; i<_max_used_thread_id; i++)
- if (threads[i].pid==pid)
- return i;
- return -1;
-}
-
-/* get thread */
-_pthread_descr __get_thread_struct(int id)
-{
- return threads+id;
-}
-
-/* thread errno location */
-int *__errno_location(void)
-{
- int id=0;
- if (__thread_inited) id=__find_thread_id(getpid());
- if (id<0)
- return 0;
- else
- return &threads[id].errno;
-}
-
-/* thread self */
-_pthread_descr __thread_self()
-{
- register int i=__find_thread_id(getpid());
- if (i<0)
- return 0;
- else
- return threads+i;
-}
-
-/* allocate a thread slot */
-_pthread_descr __thread_get_free()
-{
- _pthread_descr ret=0;
- int i;
-
- __NO_ASYNC_CANCEL_BEGIN;
- __pthread_lock(&__thread_struct_lock);
-
- for (i=0; i<PTHREAD_THREADS_MAX; i++) {
- if (threads[i].pid==0) {
- threads[i].pid=1; /* mark as taken */
- ret = threads+i;
- if (i>=_max_used_thread_id) _max_used_thread_id=i+1;
- break;
- }
- }
-
- __pthread_unlock(&__thread_struct_lock);
- __NO_ASYNC_CANCEL_END;
- return ret;
-}
-
-/* sleep a little (reschedule for this time) */
-void __thread_wait_some_time()
-{
- struct timespec reg;
- reg.tv_sec=0;
- reg.tv_nsec=SPIN_SLEEP_DURATION;
- __libc_nanosleep(&reg,0);
-}
-
-/* cleanup a thread struct */
-void __thread_cleanup(_pthread_descr th)
-{
- /* lib provided stack should be freed */
- if (th->stack_begin) free(th->stack_begin);
-
- /* an other thread has joined this on */
- if (th->joined) {
- th->joined->retval=th->retval;
- th->joined->join=0;
- th->joined=0;
- }
- th->pid=0; /* mark struct as free */
-}
-
-/* SIGHUP handler (thread cnacel) PTHREAD_CANCEL_ASYNCHRONOUS */
-static void __thread_cancel_handler(int sig)
-{
- _pthread_descr this;
- this = __thread_self();
- this->canceled=1;
- if (this->canceltype==PTHREAD_CANCEL_ASYNCHRONOUS)
- pthread_exit(PTHREAD_CANCELED);
- signal( SIGHUP, __thread_cancel_handler );
-}
-
-/* kill ALL threads / other then prime task and manager thread */
-static void __kill_all_threads()
-{
- int i;
-
- for (i=2; i<_max_used_thread_id; i++) {
- if (threads[i].pid>1) {
-#ifdef DEBUG
- printf("CANCEL ! %d\n",threads[i].pid);
-#endif
- threads[i].canceled=1;
- kill(threads[i].pid, SIGHUP); /* cancel thread */
- }
- }
-
- __thread_wait_some_time();
-
- for (i=2; i<_max_used_thread_id; i++) {
- if (threads[i].pid>1) {
-#ifdef DEBUG
- printf("KILL ! %d\n",threads[i].pid);
-#endif
- kill(threads[i].pid, SIGTERM); /* KILL thread */
- }
- }
-}
-
-__attribute__((weak)) volatile void __thread_start__key(int id) { return; }
-__attribute__((weak,alias("__thread_start__key"))) volatile void __thread_exit__key(int id);
-
-/* support for manager */
-static void *__mthread_starter(void *arg)
-{
- _pthread_descr td = (_pthread_descr)arg;
- int i = td->stack_size-4096;
-
- /* just to be sure */
- td->pid=getpid();
-
- /* signal handling for a thread */
- signal(SIGTERM, _exit);
- signal(SIGCHLD, SIG_DFL);
- signal(SIGHUP, __thread_cancel_handler );
-
- /* limit stack so that we NEVER have to worry */
- setrlimit(RLIMIT_STACK, (struct rlimit *)(&i));
-
- /* set scheduler */
- if (td->policy!=SCHED_OTHER) {
- struct sched_param sp;
- sp.sched_priority=td->priority;
- sched_setscheduler(td->pid,td->policy, &sp);
- }
-
- /* thread_key glue */
- __thread_start__key(td-threads);
-
-#ifdef DEBUG
- printf("in starter %d, parameter %8p\n", td->pid, td->func);
-#endif
-
- if (!td->canceled) {
- if (!(setjmp(td->jmp_exit))) {
- td->retval=td->func(td->arg);
-#ifdef DEBUG
- } else {
- printf("pthread_exit called in %d\n", td->pid);
-#endif
- }
- }
- pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED,0);
-
- /* thread_key glue */
- __thread_exit__key(td-threads);
-
-#ifdef DEBUG
- printf("end starter %d, retval %8p\n", td->pid, td->retval);
-#endif
-
- /* wake joined thread and put retval */
- if (td->joined) {
- td->joined->retval=td->retval;
- td->joined->join=0;
- td->joined=0;
- }
-
- /* execute all functions on the cleanup-stack */
- for (i=PTHREAD_MAX_CLEANUP;i;) {
- if (td->cleanup_stack[--i].func) {
- td->cleanup_stack[i].func(td->cleanup_stack[i].arg);
- }
- }
-
- return 0;
-}
-
-
-/* manager thread and signal handler */
-static char __manager_thread_stack[12*1024];
-static volatile _pthread_descr __manager_thread_data;
-static void __manager_SIGCHLD(int sig)
-{
- int pid, status, i;
-
- while(1) {
- pid = __libc_waitpid (-1, &status, WNOHANG);
- if (pid <= 0) break;
-
- for (i=0; i<_max_used_thread_id; i++) {
- if (threads[i].pid==pid) {
- __thread_cleanup(threads+i);
- break;
- }
- }
- }
-}
-
-static void __manager_SIGTERM(int sig)
-{
- __kill_all_threads();
- _exit(0);
-}
-
-static void* __manager_thread(void *arg)
-{
- struct sigaction sig_action_chld;
- sig_action_chld.sa_handler = __manager_SIGCHLD;
- sigemptyset(&sig_action_chld.sa_mask);
- sig_action_chld.sa_flags = SA_RESTART;
-
- sigaction(SIGCHLD, &sig_action_chld, 0);
- signal(SIGTERM, __manager_SIGTERM);
- signal(SIGHUP, SIG_IGN);
-
- __pthread_unlock(&__manager_thread_data_go_lock); /* release init */
- while(1) {
- do {
- __thread_wait_some_time();
- if (getppid()<0) __manager_SIGTERM(0);
- } while (__pthread_trylock(&__manager_thread_data_lock));
-
- __manager_thread_data->pid =
- __clone(__mthread_starter,
- __manager_thread_data->stack_addr,
- CLONE_VM | CLONE_FS | CLONE_FILES | SIGCHLD,
- __manager_thread_data);
- __thread_wait_some_time();
-#ifdef DEBUG
- printf("manager new thread %d\n",__manager_thread_data->pid);
-#endif
- __pthread_unlock(&__manager_thread_data_go_lock); /* release sender */
- }
- return 0;
-}
-
-/* pthread_create bottom half */
-int signal_manager_thread(_pthread_descr td)
-{
- __NO_ASYNC_CANCEL_BEGIN;
-
- __pthread_lock(&__manager_thread_signal_lock); /* lock */
-
- __manager_thread_data = td;
- __thread_wait_some_time();
- __pthread_unlock(&__manager_thread_data_lock); /* signal manager to start */
- __thread_wait_some_time();
- __pthread_lock(&__manager_thread_data_go_lock); /* wait for manager */
-
- __pthread_unlock(&__manager_thread_signal_lock); /* unlock */
-
- __NO_ASYNC_CANCEL_END;
-
- return td->pid;
-}
-
-
-/* thread stop */
-static void __thread_main_exit()
-{
- if (getpid()!=threads[0].pid) {
-#ifdef DEBUG
- printf("A THREAD ? %d\n",getpid());
-#endif
- kill(threads[0].pid, SIGTERM);
- while(1) __thread_wait_some_time();
- }
-#ifdef DEBUG
- else
- printf("EXIT ! %d\n",getpid());
-#endif
-
- /* stop ALL threads */
- kill(threads[1].pid, SIGTERM);
- __thread_wait_some_time();
- __kill_all_threads();
-}
-
-/* thread intern init */
-void __thread_init()
-{
- if (atexit(__thread_main_exit)==-1)
- exit(42);
-
-#ifdef DEBUG
- printf("INIT ! %d\n",getpid());
- memset(threads,0,sizeof(threads));
-#endif
-
- threads[0].pid = getpid();
-
- ++_max_used_thread_id;
- threads[1].stack_size=sizeof(__manager_thread_stack);
- threads[1].stack_addr=&__manager_thread_stack[sizeof(__manager_thread_stack)];
- threads[1].stack_begin=0;
- threads[1].func=__manager_thread;
-
- threads[1].pid = __clone(__mthread_starter, threads[1].stack_addr,
- CLONE_VM | CLONE_FS | CLONE_FILES, threads+1);
-
-#ifdef DEBUG
- printf("manager thread @ : %d\n",threads[1].pid);
-#endif
- __pthread_lock(&__manager_thread_data_go_lock); /* wait for manager to be ready */
-}
-
diff --git a/mdk-stage1/dietlibc/libpthread/thread_internal.h b/mdk-stage1/dietlibc/libpthread/thread_internal.h
deleted file mode 100644
index 5eb3bbd08..000000000
--- a/mdk-stage1/dietlibc/libpthread/thread_internal.h
+++ /dev/null
@@ -1,131 +0,0 @@
-#ifndef __THREAD_INTERNAL_H__
-#define __THREAD_INTERNAL_H__
-
-#include <pthread.h>
-#include <stdarg.h>
-#include <setjmp.h>
-#include "dietfeatures.h"
-#ifndef WANT_THREAD_SAFE
-#error "the diet libc is not compiled with thread safeness enabled!"
-#endif
-
-/* cleanup */
-#define PTHREAD_MAX_CLEANUP 8
-struct thread_cleanup_t {
- void (*func)(void*);
- void *arg;
-};
-
-/* the thread descriptor / internal */
-struct _pthread_descr_struct {
- /* runtime handling */
- struct _pthread_descr_struct *joined; /* a joined thread or NULL */
-
- /* conditional variables */
- struct _pthread_descr_struct *waitnext; /* an other waiting thread or NULL */
- int waiting; /* internal waiting "lock" */
-
- /* thread/process data */
- int pid; /* Process id */
-
- int policy; /* thread scheduling policy */
- int priority; /* thread priority */
-
- /* errno handling */
- int errno;
- int h_errno;
-
- /* stack handling */
- unsigned int stack_size; /* stack size for setrlimit */
- void *stack_addr; /* stack address for clone */
- void *stack_begin; /* begin of lib-stack / lowest address (free) */
-
- /* thread exit handling */
- void *retval; /* thread return value */
- int join; /* thread waits for other to return */
- jmp_buf jmp_exit; /* pthread_exit jump */
-
- /* thread flags */
- int detached; /* thread is detached */
- int canceled; /* thread canceled */
-
- /* cancel handling */
- int cancelstate; /* cancel state */
- int canceltype; /* type of cancellation */
-
- /* thread basics */
- void* (*func) (void* arg); /* thread function */
- void* arg; /* thread argument */
-
- /* create thread / manager thread lock */
- struct _pthread_fastlock *manager_lock;
-
- /* cleanup stack */
- struct thread_cleanup_t cleanup_stack[PTHREAD_MAX_CLEANUP];
-
-} __attribute__ ((aligned(32)));
-
-/* thread keys */
-struct _thread_key {
- int used;
- void (*destructor)(const void*);
- const void *tkd[PTHREAD_THREADS_MAX];
-};
-
-/* internal stuff */
-int __testandset(int *spinlock);
-
-void __pthread_lock(struct _pthread_fastlock * lock);
-int __pthread_trylock(struct _pthread_fastlock * lock);
-int __pthread_unlock(struct _pthread_fastlock * lock);
-
-int __clone(void* (*fn)(void*), void* stack, int flags, void *arg);
-
-int __find_thread_id(int pid);
-_pthread_descr __get_thread_struct(int id);
-
-_pthread_descr __thread_get_free();
-_pthread_descr __thread_self();
-
-void __thread_cleanup(_pthread_descr th);
-
-void __thread_wait_some_time();
-
-#define __NO_ASYNC_CANCEL_BEGIN { int oldtype; pthread_setcanceltype(PTHREAD_CANCEL_DEFERRED, &oldtype);
-#define __NO_ASYNC_CANCEL_END pthread_setcanceltype(oldtype,0); pthread_testcancel(); }
-#define __NO_ASYNC_CANCEL_STOP pthread_setcanceltype(oldtype,0); }
-
-/* manager thread stuff */
-int signal_manager_thread(_pthread_descr td);
-
-/* init stuff */
-extern pthread_once_t __thread_inited;
-void __thread_init();
-#define __THREAD_INIT() __pthread_once(&__thread_inited, __thread_init)
-#define __TEST_CANCEL() pthread_testcancel()
-
-/* diet libc syscalls */
-
-void __libc_free(void *ptr);
-void *__libc_malloc(size_t size);
-
-void __libc_closelog(void);
-void __libc_openlog(const char *ident, int option, int facility);
-void __libc_vsyslog(int priority, const char *format, va_list arg_ptr);
-
-pid_t __libc_fork(void);
-
-int __libc_close(int fd);
-int __libc_creat(const char *pathname, mode_t mode);
-int __libc_fcntl(int fd, int cmd, void *arg);
-int __libc_fsync(int fd);
-int __libc_nanosleep(const struct timespec *req, struct timespec *rem);
-int __libc_open(const char *pathname, int flags, mode_t mode);
-int __libc_pause(void);
-int __libc_read(int fd, void *buf, size_t count);
-int __libc_sigsuspend(const sigset_t *mask);
-int __libc_tcdrain(int fd);
-pid_t __libc_waitpid(pid_t pid, int *status, int options);
-int __libc_write(int fd, const void *buf, size_t count);
-
-#endif
diff --git a/mdk-stage1/dietlibc/libpthread/thread_key.c b/mdk-stage1/dietlibc/libpthread/thread_key.c
deleted file mode 100644
index b0f719fc9..000000000
--- a/mdk-stage1/dietlibc/libpthread/thread_key.c
+++ /dev/null
@@ -1,41 +0,0 @@
-#include <unistd.h>
-#include <errno.h>
-
-#include <pthread.h>
-#include "thread_internal.h"
-
-struct _pthread_fastlock __thread_keys_lock;
-struct _thread_key __thread_keys[PTHREAD_KEYS_MAX];
-
-void __thread_start__key(int id)
-{
- int i;
-
- __NO_ASYNC_CANCEL_BEGIN;
- __pthread_lock(&__thread_keys_lock);
-
- for (i=0; i<PTHREAD_KEYS_MAX; i++) {
- __thread_keys[i].tkd[id]=0;
- }
-
- __pthread_unlock(&__thread_keys_lock);
- __NO_ASYNC_CANCEL_END;
-}
-
-void __thread_exit__key(int id)
-{
- int i,try;
-
- __NO_ASYNC_CANCEL_BEGIN;
- __pthread_lock(&__thread_keys_lock);
-
- for (i=0; i<PTHREAD_KEYS_MAX; i++) {
- if ((__thread_keys[i].used) && (__thread_keys[i].destructor)) {
- for (try=0;__thread_keys[i].tkd[id] && (try<PTHREAD_DESTRUCTOR_ITERATIONS);++try)
- __thread_keys[i].destructor(__thread_keys[i].tkd[id]);
- }
- }
-
- __pthread_unlock(&__thread_keys_lock);
- __NO_ASYNC_CANCEL_STOP;
-}
diff --git a/mdk-stage1/dietlibc/libregex/rx.c b/mdk-stage1/dietlibc/libregex/rx.c
deleted file mode 100644
index b28358c2e..000000000
--- a/mdk-stage1/dietlibc/libregex/rx.c
+++ /dev/null
@@ -1,434 +0,0 @@
-#include <regex.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <string.h>
-
-/* this is ugly.
- * the idea is to build a parse tree, then do some poor man's OOP with a
- * generic matcher function call that is always that the start of each
- * record, and a next pointer. When the parse tree is done, we need to
- * recursively set the next pointers to point to the part of the parse
- * tree that needs to match next.
- * This is the prototype of the generic match function call pointer.
- * The first argument is the "this" pointer, the second is the text to
- * be matched against, ofs is the offset from the start of the matched
- * text (so we can match "^") and matches is an array where match
- * positions are stored. */
-/* now declared in regex.h: */
-/* typedef int (*matcher)(void*,const char*,int ofs,regmatch_t* matches,int plus,int eflags); */
-
-/* one would think that this is approach is an order of magnitude slower
- * than the standard NFA approach, but it isn't. The busybox grep took
- * 0.26 seconds for a fixed string compared to 0.19 seconds for the
- * glibc regex. */
-
-/* first part: parse a regex into a parse tree */
-struct bracketed {
- unsigned int cc[32];
-};
-
-/* now declared in regex.h:
-struct regex {
- matcher m;
- void* next;
- int pieces;
- int num;
- struct branch *b;
-}; */
-
-struct atom {
- matcher m;
- void* next;
- enum { EMPTY, REGEX, BRACKET, ANY, LINESTART, LINEEND, WORDSTART, WORDEND, CHAR, } type;
- int bnum;
- union {
- struct regex r;
- struct bracketed b;
- char c;
- } u;
-};
-
-struct piece {
- matcher m;
- void* next;
- struct atom a;
- unsigned char min,max;
-};
-
-struct branch {
- matcher m;
- void* next;
- int num;
- struct piece *p;
-};
-
-static void clearcc(unsigned int* x) {
- memset(x,0,sizeof(*x));
-}
-
-static void setcc(unsigned int* x,unsigned int bit) {
- x[bit/32]|=(1<<((bit%32)-1));
-}
-
-static int issetcc(unsigned int* x,unsigned int bit) {
- return x[bit/32] & (1<<((bit%32)-1));
-}
-
-static const char* parsebracketed(struct bracketed*__restrict__ b,const char*__restrict__ s,regex_t*__restrict__ rx) {
- const char* t;
- int i,negflag=0;
- if (*s!='[') return s;
- t=s+1;
- clearcc(b->cc);
- if (*t=='^') { negflag=1; ++t; }
- do {
- if (*t==0) return s;
- setcc(b->cc,rx->cflags&REG_ICASE?*t:tolower(*t));
- if (t[1]=='-' && t[2]!=']') {
- for (i=*t+1; i<=t[2]; ++i) setcc(b->cc,rx->cflags&REG_ICASE?i:tolower(i));
- t+=2;
- }
- ++t;
- } while (*t!=']');
- if (negflag) for (i=0; i<32; ++i) b->cc[i]=~b->cc[i];
- return t+1;
-}
-
-static const char* parseregex(struct regex* r,const char* s,regex_t* rx);
-
-static int matchatom(void*__restrict__ x,const char*__restrict__ s,int ofs,struct __regex_t*__restrict__ preg,int plus,int eflags) {
- register struct atom* a=(struct atom*)x;
- int matchlen=0;
- switch (a->type) {
- case EMPTY:
-// printf("matching EMPTY against \"%s\"\n",s);
- preg->l[a->bnum].rm_so=preg->l[a->bnum].rm_eo=ofs;
- goto match;
- case REGEX:
-// printf("matching REGEX against \"%s\"\n",s);
- if ((matchlen=a->u.r.m(a,s,ofs,preg,0,eflags))>=0) {
- preg->l[a->bnum].rm_so=ofs;
- preg->l[a->bnum].rm_eo=ofs+matchlen;
- goto match;
- }
- break;
- case BRACKET:
-// printf("matching BRACKET against \"%s\"\n",s);
- matchlen=1;
- if (*s=='\n' && (preg->cflags&REG_NEWLINE)) break;
- if (*s && issetcc(a->u.b.cc,(preg->cflags&REG_ICASE?tolower(*s):*s)))
- goto match;
- break;
- case ANY:
-// printf("matching ANY against \"%s\"\n",s);
- if (*s=='\n' && (preg->cflags&REG_NEWLINE)) break;
- matchlen=1;
- if (*s) goto match;
- break;
- case LINESTART:
-// printf("matching LINESTART against \"%s\"\n",s);
- if (ofs==0 && (eflags&REG_NOTBOL)==0) {
- goto match;
- }
- break;
- case LINEEND:
-// printf("matching LINEEND against \"%s\"\n",s);
- if ((*s && *s!='\n') || (eflags&REG_NOTEOL)==0) break;
- goto match;
- case WORDSTART:
- if ((ofs==0 || isspace(s[-1])) && !isspace(*s))
- goto match;
- break;
- case WORDEND:
- if (ofs>0 && !isspace(s[-1]) && isspace(*s))
- goto match;
- break;
- case CHAR:
-// printf("matching CHAR %c against \"%s\"\n",a->u.c,s);
- matchlen=1;
- if (((preg->cflags&REG_ICASE)?tolower(*s):*s)==a->u.c) goto match;
- break;
- }
- return -1;
-match:
- if (a->next)
- return ((struct atom*)(a->next))->m(a->next,s+matchlen,ofs+matchlen,preg,plus+matchlen,eflags);
- else
- return plus+matchlen;
-}
-
-static const char* parseatom(struct atom*__restrict__ a,const char*__restrict__ s,regex_t*__restrict__ rx) {
- const char *tmp;
- a->m=matchatom;
- a->bnum=-1;
- switch (*s) {
- case '(':
- a->bnum=++rx->brackets;
- if (s[1]==')') {
- a->type=EMPTY;
- return s+2;
- }
- a->type=REGEX;
- if ((tmp=parseregex(&a->u.r,s+1,rx))!=s) {
- if (*tmp==')')
- return tmp+1;
- }
- case 0:
- case '|':
- case ')':
- return s;
- case '[':
- a->type=BRACKET;
- if ((tmp=parsebracketed(&a->u.b,s,rx))!=s)
- return tmp;
- return s;
- case '.':
- a->type=ANY;
- break;
- case '^':
- a->type=LINESTART;
- break;
- case '$':
- a->type=LINEEND;
- break;
- case '\\':
- if (!*++s) return s;
- if (*s=='<') {
- a->type=WORDSTART;
- break;
- } else if (*s=='>') {
- a->type=WORDEND;
- break;
- }
- default:
- a->type=CHAR;
- a->u.c=rx->cflags&REG_ICASE?*s:tolower(*s);
- break;
- }
- return s+1;
-}
-
-/* needs to do "greedy" matching, i.e. match as often as possible */
-static int matchpiece(void*__restrict__ x,const char*__restrict__ s,int ofs,struct __regex_t*__restrict__ preg,int plus,int eflags) {
- register struct piece* a=(struct piece*)x;
- int matchlen=0;
- int tmp,num=0;
- unsigned int *offsets=alloca(sizeof(int)*a->max);
- offsets[0]=0;
-// printf("matchpiece \"%s\"...\n",s);
- /* first, try to match the atom as often as possible, up to a->max times */
- if (a->max == 1 && a->min == 1)
- return a->a.m(&a->a,s+matchlen,ofs+matchlen,preg,0,eflags);
- while (num<a->max) {
- void* save=a->a.next;
- a->a.next=0;
- if ((tmp=a->a.m(&a->a,s+matchlen,ofs+matchlen,preg,0,eflags))>=0) {
- a->a.next=save;
- ++num;
- matchlen+=tmp;
- offsets[num]=tmp;
- } else {
- a->a.next=save;
- break;
- }
- }
- if (num<a->min) return -1; /* already at minimum matches; signal mismatch */
- /* then, while the rest does not match, back off */
- for (;;) {
- if (a->next)
- tmp=((struct atom*)(a->next))->m(a->next,s+matchlen,ofs+matchlen,preg,plus+matchlen,eflags);
- else
- tmp=plus+matchlen;
- if (tmp>=0) break; /* it did match; don't back off any further */
- matchlen-=offsets[num];
- --num;
- }
- return tmp;
-}
-
-static const char* parsepiece(struct piece*__restrict__ p,const char*__restrict__ s,regex_t*__restrict__ rx) {
- const char* tmp=parseatom(&p->a,s,rx);
- if (tmp==s) return s;
- p->m=matchpiece;
- p->min=p->max=1;
- switch (*tmp) {
- case '*': p->min=0; p->max=RE_DUP_MAX; break;
- case '+': p->min=1; p->max=RE_DUP_MAX; break;
- case '?': p->min=0; p->max=1; break;
- case '{':
- if (isdigit(*++tmp)) {
- p->min=*tmp-'0'; p->max=RE_DUP_MAX;
- while (isdigit(*++tmp)) p->min=p->min*10+*tmp-'0';
- if (*tmp==',') {
- if (isdigit(*++tmp)) {
- p->max=*tmp-'0';
- while (isdigit(*++tmp)) p->max=p->max*10+*tmp-'0';
- }
- }
- if (*tmp!='}') return s;
- ++tmp;
- }
- default:
- return tmp;
- }
- return tmp+1;
-}
-
-/* trivial, just pass through */
-static int matchbranch(void*__restrict__ x,const char*__restrict__ s,int ofs,struct __regex_t*__restrict__ preg,int plus,int eflags) {
- register struct branch* a=(struct branch*)x;
- int tmp;
- tmp=a->p->m(a->p,s,ofs,preg,plus,eflags);
- if (tmp>=0) {
- if (a->next)
- return ((struct atom*)(a->next))->m(a->next,s+tmp,ofs+tmp,preg,plus+tmp,eflags);
- else
- return plus+tmp;
- }
- return -1;
-}
-
-static const char* parsebranch(struct branch*__restrict__ b,const char*__restrict__ s,regex_t*__restrict__ rx,int*__restrict__ pieces) {
- struct piece p;
- const char *tmp;
- b->m=matchbranch;
- b->num=0; b->p=0;
- for (;;) {
- if (*s=='|') {
- if (b->num==0) {
- tmp=s+1;
- p.a.type=EMPTY;
- p.min=p.max=1;
- }
- } else {
- tmp=parsepiece(&p,s,rx);
- if (tmp==s) return s;
- }
- if (!(b->p=realloc(b->p,++b->num*sizeof(p)))) return s;
- b->p[b->num-1]=p;
- if (*s=='|') { ++tmp; break; }
- s=tmp;
- }
- *pieces+=b->num;
- return tmp;
-}
-
-/* try the branches one by one */
-static int matchregex(void*__restrict__ x,const char*__restrict__ s,int ofs,struct __regex_t*__restrict__ preg,int plus,int eflags) {
- register struct regex* a=(struct regex*)x;
- int i,tmp;
- for (i=0; i<a->num; ++i) {
- tmp=a->b[i].m(&a->b[i],s,ofs,preg,plus,eflags);
- if (tmp>=0) {
- if (a->next)
- return ((struct atom*)(a->next))->m(a->next,s+tmp,ofs+tmp,preg,plus+tmp,eflags);
- else
- return plus+tmp;
- }
- }
- return -1;
-}
-
-static const char* parseregex(struct regex*__restrict__ r,const char*__restrict__ s,regex_t*__restrict__ p) {
- struct branch b;
- const char *tmp;
- r->m=matchregex;
- r->num=0; r->b=0; r->pieces=0;
- for (;;) {
- tmp=parsebranch(&b,s,p,&r->pieces);
- if (tmp==s) return s;
- if (!(r->b=realloc(r->b,++r->num*sizeof(b)))) return s;
- r->b[r->num-1]=b;
- s=tmp;
- }
- return tmp;
-}
-
-
-/* The matcher relies on the presence of next pointers, of which the
- * parser does not know the correct destination. So we need an
- * additional pass through the data structure that sets the next
- * pointers correctly. */
-static void regex_putnext(struct regex* r,void* next);
-
-static void atom_putnext(struct atom*__restrict__ a,void*__restrict__ next) {
- a->next=next;
- if (a->type==REGEX)
- regex_putnext(&a->u.r,next);
-}
-
-static void piece_putnext(struct piece*__restrict__ p,void*__restrict__ next) {
- p->next=next;
- atom_putnext(&p->a,next);
-}
-
-static void branch_putnext(struct branch*__restrict__ b,void*__restrict__ next) {
- int i;
- for (i=0; i<b->num-1; ++i)
- piece_putnext(&b->p[i],&b->p[i+1]);
- piece_putnext(&b->p[i],0);
- b->next=next;
-}
-
-static void regex_putnext(struct regex*__restrict__ r,void*__restrict__ next) {
- int i;
- for (i=0; i<r->num; ++i)
- branch_putnext(&r->b[i],next);
- r->next=next;
-}
-
-
-
-int regcomp(regex_t*__restrict__ preg, const char*__restrict__ regex, int cflags) {
- const char* t=parseregex(&preg->r,regex,preg);
- if (t==regex) return -1;
- regex_putnext(&preg->r,0);
- preg->cflags=cflags;
- return 0;
-}
-
-int regexec(const regex_t*__restrict__ preg, const char*__restrict__ string, size_t nmatch, regmatch_t pmatch[], int eflags) {
- int matched;
- const char *orig=string;
- ((regex_t*)preg)->l=alloca(sizeof(regmatch_t)*(preg->brackets+1));
- while (*string) {
- matched=preg->r.m((void*)&preg->r,string,string-orig,(regex_t*)preg,0,eflags);
- if (matched>=0) {
- if ((preg->cflags&REG_NOSUB)==0) memmove(pmatch,preg->l,nmatch*sizeof(regmatch_t));
- return 0;
- }
- ++string; eflags|=REG_NOTBOL;
- }
- return REG_NOMATCH;
-}
-
-
-
-void regfree(regex_t* preg) {
- int i;
- for (i=0; i<preg->r.num; ++i) {
- free(preg->r.b[i].p);
- free(preg->r.b);
- }
-}
-
-size_t regerror(int errcode, const regex_t*__restrict__ preg, char*__restrict__ errbuf, size_t errbuf_size) {
- strncpy(errbuf,"invalid regular expression (sorry)",errbuf_size);
- return strlen(errbuf);
-}
-
-
-
-
-#if 0
-int main() {
- struct regex r;
- int bnum=-1;
- const char* t=parseregex(&r,"^a*ab$",&bnum);
- regex_putnext(&r,0);
- printf("%d pieces, %s\n",r.pieces,t);
- printf("%d\n",r.m(&r,"aaab",0,0,0));
- return 0;
-}
-#endif
diff --git a/mdk-stage1/dietlibc/librpc/auth_none.c b/mdk-stage1/dietlibc/librpc/auth_none.c
deleted file mode 100644
index 7a4dffe87..000000000
--- a/mdk-stage1/dietlibc/librpc/auth_none.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* @(#)auth_none.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)auth_none.c 1.19 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * auth_none.c
- * Creates a client authentication handle for passing "null"
- * credentials and verifiers to remote systems.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/auth.h>
-#define MAX_MARSHEL_SIZE 20
-
-/*
- * Authenticator operations routines
- */
-static void authnone_verf();
-static void authnone_destroy();
-static bool_t authnone_marshal();
-static bool_t authnone_validate();
-static bool_t authnone_refresh();
-
-static struct auth_ops ops = {
- authnone_verf,
- authnone_marshal,
- authnone_validate,
- authnone_refresh,
- authnone_destroy
-};
-
-static struct authnone_private {
- AUTH no_client;
- char marshalled_client[MAX_MARSHEL_SIZE];
- u_int mcnt;
-} *authnone_private;
-
-AUTH *authnone_create()
-{
- register struct authnone_private *ap = authnone_private;
- XDR xdr_stream;
- register XDR *xdrs;
-
- if (ap == 0) {
- ap = (struct authnone_private *) calloc(1, sizeof(*ap));
- if (ap == 0)
- return (0);
- authnone_private = ap;
- }
- if (!ap->mcnt) {
- ap->no_client.ah_cred = ap->no_client.ah_verf = _null_auth;
- ap->no_client.ah_ops = &ops;
- xdrs = &xdr_stream;
- xdrmem_create(xdrs, ap->marshalled_client,
- (u_int) MAX_MARSHEL_SIZE, XDR_ENCODE);
- (void) xdr_opaque_auth(xdrs, &ap->no_client.ah_cred);
- (void) xdr_opaque_auth(xdrs, &ap->no_client.ah_verf);
- ap->mcnt = XDR_GETPOS(xdrs);
- XDR_DESTROY(xdrs);
- }
- return (&ap->no_client);
-}
-
- /*ARGSUSED*/ static bool_t authnone_marshal(client, xdrs)
-AUTH *client;
-XDR *xdrs;
-{
- register struct authnone_private *ap = authnone_private;
-
- if (ap == 0)
- return (0);
- return ((*xdrs->x_ops->x_putbytes) (xdrs,
- ap->marshalled_client, ap->mcnt));
-}
-
-static void authnone_verf()
-{
-}
-
-static bool_t authnone_validate()
-{
-
- return (TRUE);
-}
-
-static bool_t authnone_refresh()
-{
-
- return (FALSE);
-}
-
-static void authnone_destroy()
-{
-}
diff --git a/mdk-stage1/dietlibc/librpc/auth_unix.c b/mdk-stage1/dietlibc/librpc/auth_unix.c
deleted file mode 100644
index 5daeb5f4a..000000000
--- a/mdk-stage1/dietlibc/librpc/auth_unix.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/* @(#)auth_unix.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)auth_unix.c 1.19 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * auth_unix.c, Implements UNIX style authentication parameters.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * The system is very weak. The client uses no encryption for it's
- * credentials and only sends null verifiers. The server sends backs
- * null verifiers or optionally a verifier that suggests a new short hand
- * for the credentials.
- *
- */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <string.h>
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/auth.h>
-#include <rpc/auth_unix.h>
-
-/*
- * Unix authenticator operations vector
- */
-static void authunix_nextverf();
-static bool_t authunix_marshal();
-static bool_t authunix_validate();
-static bool_t authunix_refresh();
-static void authunix_destroy();
-
-static struct auth_ops auth_unix_ops = {
- authunix_nextverf,
- authunix_marshal,
- authunix_validate,
- authunix_refresh,
- authunix_destroy
-};
-
-/*
- * This struct is pointed to by the ah_private field of an auth_handle.
- */
-struct audata {
- struct opaque_auth au_origcred; /* original credentials */
- struct opaque_auth au_shcred; /* short hand cred */
- u_long au_shfaults; /* short hand cache faults */
- char au_marshed[MAX_AUTH_BYTES];
- u_int au_mpos; /* xdr pos at end of marshed */
-};
-
-#define AUTH_PRIVATE(auth) ((struct audata *)auth->ah_private)
-
-static void marshal_new_auth();
-
-
-/*
- * Create a unix style authenticator.
- * Returns an auth handle with the given stuff in it.
- */
-AUTH *authunix_create __P ((char *machname, uid_t uid,
- gid_t gid, int len,
- gid_t *aup_gids))
-{
- struct authunix_parms aup;
- char mymem[MAX_AUTH_BYTES];
- struct timeval now;
- XDR xdrs;
- register AUTH *auth;
- register struct audata *au;
-
- /*
- * Allocate and set up auth handle
- */
- auth = (AUTH *) mem_alloc(sizeof(*auth));
-#ifndef KERNEL
- if (auth == NULL) {
- (void) fprintf(stderr, "authunix_create: out of memory\n");
- return (NULL);
- }
-#endif
- au = (struct audata *) mem_alloc(sizeof(*au));
-#ifndef KERNEL
- if (au == NULL) {
- (void) fprintf(stderr, "authunix_create: out of memory\n");
- return (NULL);
- }
-#endif
- auth->ah_ops = &auth_unix_ops;
- auth->ah_private = (caddr_t) au;
- auth->ah_verf = au->au_shcred = _null_auth;
- au->au_shfaults = 0;
-
- /*
- * fill in param struct from the given params
- */
- (void) gettimeofday(&now, (struct timezone *) 0);
- aup.aup_time = now.tv_sec;
- aup.aup_machname = machname;
- aup.aup_uid = uid;
- aup.aup_gid = gid;
- aup.aup_len = (u_int) len;
- aup.aup_gids = aup_gids;
-
- /*
- * Serialize the parameters into origcred
- */
- xdrmem_create(&xdrs, mymem, MAX_AUTH_BYTES, XDR_ENCODE);
- if (!xdr_authunix_parms(&xdrs, &aup))
- abort();
- au->au_origcred.oa_length = len = XDR_GETPOS(&xdrs);
- au->au_origcred.oa_flavor = AUTH_UNIX;
-#ifdef KERNEL
- au->au_origcred.oa_base = mem_alloc((u_int) len);
-#else
- if ((au->au_origcred.oa_base = mem_alloc((u_int) len)) == NULL) {
- (void) fprintf(stderr, "authunix_create: out of memory\n");
- return (NULL);
- }
-#endif
- bcopy(mymem, au->au_origcred.oa_base, (u_int) len);
-
- /*
- * set auth handle to reflect new cred.
- */
- auth->ah_cred = au->au_origcred;
- marshal_new_auth(auth);
- return (auth);
-}
-
-/*
- * Returns an auth handle with parameters determined by doing lots of
- * syscalls.
- */
-AUTH *authunix_create_default()
-{
- register int len;
- char machname[MAX_MACHINE_NAME + 1];
- register int uid;
- register int gid;
- gid_t gids[NGRPS];
-
- if (gethostname(machname, MAX_MACHINE_NAME) == -1)
- abort();
- machname[MAX_MACHINE_NAME] = 0;
- uid = geteuid();
- gid = getegid();
- if ((len = getgroups(NGRPS, gids)) < 0)
- abort();
- return (authunix_create(machname, uid, gid, len, gids));
-}
-
-/*
- * authunix operations
- */
-
-static void authunix_nextverf(auth)
-AUTH *auth;
-{
- /* no action necessary */
-}
-
-static bool_t authunix_marshal(auth, xdrs)
-AUTH *auth;
-XDR *xdrs;
-{
- register struct audata *au = AUTH_PRIVATE(auth);
-
- return (XDR_PUTBYTES(xdrs, au->au_marshed, au->au_mpos));
-}
-
-static bool_t authunix_validate(auth, verf)
-register AUTH *auth;
-struct opaque_auth verf;
-{
- register struct audata *au;
- XDR xdrs;
-
- if (verf.oa_flavor == AUTH_SHORT) {
- au = AUTH_PRIVATE(auth);
- xdrmem_create(&xdrs, verf.oa_base, verf.oa_length, XDR_DECODE);
-
- if (au->au_shcred.oa_base != NULL) {
- mem_free(au->au_shcred.oa_base, au->au_shcred.oa_length);
- au->au_shcred.oa_base = NULL;
- }
- if (xdr_opaque_auth(&xdrs, &au->au_shcred)) {
- auth->ah_cred = au->au_shcred;
- } else {
- xdrs.x_op = XDR_FREE;
- (void) xdr_opaque_auth(&xdrs, &au->au_shcred);
- au->au_shcred.oa_base = NULL;
- auth->ah_cred = au->au_origcred;
- }
- marshal_new_auth(auth);
- }
- return (TRUE);
-}
-
-static bool_t authunix_refresh(auth)
-register AUTH *auth;
-{
- register struct audata *au = AUTH_PRIVATE(auth);
- struct authunix_parms aup;
- struct timeval now;
- XDR xdrs;
- register int stat;
-
- if (auth->ah_cred.oa_base == au->au_origcred.oa_base) {
- /* there is no hope. Punt */
- return (FALSE);
- }
- au->au_shfaults++;
-
- /* first deserialize the creds back into a struct authunix_parms */
- aup.aup_machname = NULL;
- aup.aup_gids = (gid_t *) NULL;
- xdrmem_create(&xdrs, au->au_origcred.oa_base,
- au->au_origcred.oa_length, XDR_DECODE);
- stat = xdr_authunix_parms(&xdrs, &aup);
- if (!stat)
- goto done;
-
- /* update the time and serialize in place */
- (void) gettimeofday(&now, (struct timezone *) 0);
- aup.aup_time = now.tv_sec;
- xdrs.x_op = XDR_ENCODE;
- XDR_SETPOS(&xdrs, 0);
- stat = xdr_authunix_parms(&xdrs, &aup);
- if (!stat)
- goto done;
- auth->ah_cred = au->au_origcred;
- marshal_new_auth(auth);
- done:
- /* free the struct authunix_parms created by deserializing */
- xdrs.x_op = XDR_FREE;
- (void) xdr_authunix_parms(&xdrs, &aup);
- XDR_DESTROY(&xdrs);
- return (stat);
-}
-
-static void authunix_destroy(auth)
-register AUTH *auth;
-{
- register struct audata *au = AUTH_PRIVATE(auth);
-
- mem_free(au->au_origcred.oa_base, au->au_origcred.oa_length);
-
- if (au->au_shcred.oa_base != NULL)
- mem_free(au->au_shcred.oa_base, au->au_shcred.oa_length);
-
- mem_free(auth->ah_private, sizeof(struct audata));
-
- if (auth->ah_verf.oa_base != NULL)
- mem_free(auth->ah_verf.oa_base, auth->ah_verf.oa_length);
-
- mem_free((caddr_t) auth, sizeof(*auth));
-}
-
-/*
- * Marshals (pre-serializes) an auth struct.
- * sets private data, au_marshed and au_mpos
- */
-static void marshal_new_auth(auth)
-register AUTH *auth;
-{
- XDR xdr_stream;
- register XDR *xdrs = &xdr_stream;
- register struct audata *au = AUTH_PRIVATE(auth);
-
- xdrmem_create(xdrs, au->au_marshed, MAX_AUTH_BYTES, XDR_ENCODE);
- if ((!xdr_opaque_auth(xdrs, &(auth->ah_cred))) ||
- (!xdr_opaque_auth(xdrs, &(auth->ah_verf)))) {
- perror("auth_none.c - Fatal marshalling problem");
- } else {
- au->au_mpos = XDR_GETPOS(xdrs);
- }
- XDR_DESTROY(xdrs);
-}
diff --git a/mdk-stage1/dietlibc/librpc/authunix_prot.c b/mdk-stage1/dietlibc/librpc/authunix_prot.c
deleted file mode 100644
index ddcadb808..000000000
--- a/mdk-stage1/dietlibc/librpc/authunix_prot.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* @(#)authunix_prot.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)authunix_prot.c 1.15 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * authunix_prot.c
- * XDR for UNIX style authentication parameters for RPC
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/auth.h>
-#include <rpc/auth_unix.h>
-
-/*
- * XDR for unix authentication parameters.
- */
-bool_t xdr_authunix_parms(xdrs, p)
-register XDR *xdrs;
-register struct authunix_parms *p;
-{
- int a,b;
-
- if (xdr_u_long(xdrs, &(p->aup_time))
- && xdr_string(xdrs, &(p->aup_machname), MAX_MACHINE_NAME)
- && xdr_int(xdrs, &a)
- && xdr_int(xdrs, &b)
- && xdr_array(xdrs, (caddr_t *) & (p->aup_gids),
- &(p->aup_len), NGRPS, sizeof(int), (xdrproc_t)xdr_int)) {
- p->aup_uid=(uid_t)a;
- p->aup_gid=(gid_t)b;
- return (TRUE);
- }
- return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/bindresvport.c b/mdk-stage1/dietlibc/librpc/bindresvport.c
deleted file mode 100644
index 8b65261dd..000000000
--- a/mdk-stage1/dietlibc/librpc/bindresvport.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * Copyright (c) 1987 by Sun Microsystems, Inc.
- */
-
-#include <unistd.h>
-#include <string.h>
-#include <sys/types.h>
-#include <errno.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-
-/*
- * Bind a socket to a privileged IP port
- */
-int bindresvport(sd, sin)
-int sd;
-struct sockaddr_in *sin;
-{
- int res;
- static short port;
- struct sockaddr_in myaddr;
- extern int errno;
- int i;
-
-#define STARTPORT 600
-#define ENDPORT (IPPORT_RESERVED - 1)
-#define NPORTS (ENDPORT - STARTPORT + 1)
-
- if (sin == (struct sockaddr_in *) 0) {
- sin = &myaddr;
- bzero(sin, sizeof(*sin));
- sin->sin_family = AF_INET;
- } else if (sin->sin_family != AF_INET) {
- errno = EPFNOSUPPORT;
- return (-1);
- }
- if (port == 0) {
- port = (getpid() % NPORTS) + STARTPORT;
- }
- res = -1;
- errno = EADDRINUSE;
- for (i = 0; i < NPORTS && res < 0 && errno == EADDRINUSE; i++) {
- sin->sin_port = htons(port++);
- if (port > ENDPORT) {
- port = STARTPORT;
- }
- res = bind(sd, (struct sockaddr*)sin, sizeof(struct sockaddr_in));
- }
- return (res);
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_generic.c b/mdk-stage1/dietlibc/librpc/clnt_generic.c
deleted file mode 100644
index 9bb81cc80..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_generic.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/* @(#)clnt_generic.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)clnt_generic.c 1.4 87/08/11 (C) 1987 SMI";
-#endif
-/*
- * Copyright (C) 1987, Sun Microsystems, Inc.
- */
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <errno.h>
-#include <netdb.h>
-#include <string.h>
-
-/*
- * Generic client creation: takes (hostname, program-number, protocol) and
- * returns client handle. Default options are set, which the user can
- * change using the rpc equivalent of ioctl()'s.
- */
-CLIENT *clnt_create __P ((const char *hostname, const u_long prog,
- const u_long vers, const char *proto))
-{
- struct hostent *h;
- struct protoent *p;
- struct sockaddr_in sin;
- int sock;
- struct timeval tv;
- CLIENT *client;
-
- h = gethostbyname(hostname);
- if (h == NULL) {
- rpc_createerr.cf_stat = RPC_UNKNOWNHOST;
- return (NULL);
- }
- if (h->h_addrtype != AF_INET) {
- /*
- * Only support INET for now
- */
- rpc_createerr.cf_stat = RPC_SYSTEMERROR;
- rpc_createerr.cf_error.re_errno = EAFNOSUPPORT;
- return (NULL);
- }
-#ifdef __linux__
- bzero((char *) &sin, sizeof(sin));
-#endif
- sin.sin_family = h->h_addrtype;
- sin.sin_port = 0;
-#ifndef __linux__
- bzero(sin.sin_zero, sizeof(sin.sin_zero));
-#endif
- bcopy(h->h_addr, (char *) &sin.sin_addr, h->h_length);
- p = getprotobyname(proto);
- if (p == NULL) {
- rpc_createerr.cf_stat = RPC_UNKNOWNPROTO;
- rpc_createerr.cf_error.re_errno = EPFNOSUPPORT;
- return (NULL);
- }
- sock = RPC_ANYSOCK;
- switch (p->p_proto) {
- case IPPROTO_UDP:
- tv.tv_sec = 5;
- tv.tv_usec = 0;
- client = clntudp_create(&sin, prog, vers, tv, &sock);
- if (client == NULL) {
- return (NULL);
- }
- tv.tv_sec = 25;
- clnt_control(client, CLSET_TIMEOUT, (char*)&tv);
- break;
- case IPPROTO_TCP:
- client = clnttcp_create(&sin, prog, vers, &sock, 0, 0);
- if (client == NULL) {
- return (NULL);
- }
- tv.tv_sec = 25;
- tv.tv_usec = 0;
- clnt_control(client, CLSET_TIMEOUT, (char*)&tv);
- break;
- default:
- rpc_createerr.cf_stat = RPC_SYSTEMERROR;
- rpc_createerr.cf_error.re_errno = EPFNOSUPPORT;
- return (NULL);
- }
- return (client);
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_perror.c b/mdk-stage1/dietlibc/librpc/clnt_perror.c
deleted file mode 100644
index 4ede1a43e..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_perror.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* @(#)clnt_perror.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)clnt_perror.c 1.15 87/10/07 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * clnt_perror.c
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- */
-#include <stdio.h>
-
-#include <rpc/types.h>
-#include <rpc/auth.h>
-#include <rpc/clnt.h>
-
-//extern char *sys_errlist[];
-//static char *auth_errmsg();
-
-extern char *strcpy();
-
-#if 0
-static char *buf;
-
-static char *_buf()
-{
-
- if (buf == 0)
- buf = (char *) malloc(256);
- return (buf);
-}
-#endif
-
-/*
- * Print reply error info
- */
-char *clnt_sperror __P ((CLIENT *rpch, const char *s))
-{
-#if 0
- struct rpc_err e;
- void clnt_perrno();
- char *err;
- char *str = _buf();
- char *strstart = str;
-
- if (str == 0)
- return (0);
- CLNT_GETERR(rpch, &e);
-
- (void) sprintf(str, "%s: ", s);
- str += strlen(str);
-
- (void) strcpy(str, clnt_sperrno(e.re_status));
- str += strlen(str);
-
- switch (e.re_status) {
- case RPC_SUCCESS:
- case RPC_CANTENCODEARGS:
- case RPC_CANTDECODERES:
- case RPC_TIMEDOUT:
- case RPC_PROGUNAVAIL:
- case RPC_PROCUNAVAIL:
- case RPC_CANTDECODEARGS:
- case RPC_SYSTEMERROR:
- case RPC_UNKNOWNHOST:
- case RPC_UNKNOWNPROTO:
- case RPC_PMAPFAILURE:
- case RPC_PROGNOTREGISTERED:
- case RPC_FAILED:
- break;
-
- case RPC_CANTSEND:
- case RPC_CANTRECV:
- (void) sprintf(str, "; errno = %s", sys_errlist[e.re_errno]);
- str += strlen(str);
- break;
-
- case RPC_VERSMISMATCH:
- (void) sprintf(str,
- "; low version = %lu, high version = %lu",
- e.re_vers.low, e.re_vers.high);
- str += strlen(str);
- break;
-
- case RPC_AUTHERROR:
- err = auth_errmsg(e.re_why);
- (void) sprintf(str, "; why = ");
- str += strlen(str);
- if (err != NULL) {
- (void) sprintf(str, "%s", err);
- } else {
- (void) sprintf(str,
- "(unknown authentication error - %d)",
- (int) e.re_why);
- }
- str += strlen(str);
- break;
-
- case RPC_PROGVERSMISMATCH:
- (void) sprintf(str,
- "; low version = %lu, high version = %lu",
- e.re_vers.low, e.re_vers.high);
- str += strlen(str);
- break;
-
- default: /* unknown */
- (void) sprintf(str,
- "; s1 = %lu, s2 = %lu", e.re_lb.s1, e.re_lb.s2);
- str += strlen(str);
- break;
- }
- (void) sprintf(str, "\n");
- return (strstart);
-#endif
- return (0);
-}
-
-void clnt_perror __P ((CLIENT *rpch, const char *s))
-{
- (void) fprintf(stderr, "%s", clnt_sperror(rpch, s));
-}
-
-
-struct rpc_errtab {
- enum clnt_stat status;
- char *message;
-};
-
-#if 0
-static struct rpc_errtab rpc_errlist[] = {
- {RPC_SUCCESS,
- "RPC: Success"},
- {RPC_CANTENCODEARGS,
- "RPC: Can't encode arguments"},
- {RPC_CANTDECODERES,
- "RPC: Can't decode result"},
- {RPC_CANTSEND,
- "RPC: Unable to send"},
- {RPC_CANTRECV,
- "RPC: Unable to receive"},
- {RPC_TIMEDOUT,
- "RPC: Timed out"},
- {RPC_VERSMISMATCH,
- "RPC: Incompatible versions of RPC"},
- {RPC_AUTHERROR,
- "RPC: Authentication error"},
- {RPC_PROGUNAVAIL,
- "RPC: Program unavailable"},
- {RPC_PROGVERSMISMATCH,
- "RPC: Program/version mismatch"},
- {RPC_PROCUNAVAIL,
- "RPC: Procedure unavailable"},
- {RPC_CANTDECODEARGS,
- "RPC: Server can't decode arguments"},
- {RPC_SYSTEMERROR,
- "RPC: Remote system error"},
- {RPC_UNKNOWNHOST,
- "RPC: Unknown host"},
- {RPC_UNKNOWNPROTO,
- "RPC: Unknown protocol"},
- {RPC_PMAPFAILURE,
- "RPC: Port mapper failure"},
- {RPC_PROGNOTREGISTERED,
- "RPC: Program not registered"},
- {RPC_FAILED,
- "RPC: Failed (unspecified error)"}
-};
-#endif
-
-/*
- * This interface for use by clntrpc
- */
-char *clnt_sperrno(stat)
-enum clnt_stat stat;
-{
-#if 0
- int i;
-
- for (i = 0; i < sizeof(rpc_errlist) / sizeof(struct rpc_errtab); i++) {
- if (rpc_errlist[i].status == stat) {
- return (rpc_errlist[i].message);
- }
- }
-#endif
- return ("RPC: (unknown error code)");
-}
-
-void clnt_perrno(num)
-enum clnt_stat num;
-{
- (void) fprintf(stderr, "%s", clnt_sperrno(num));
-}
-
-
-char *clnt_spcreateerror __P ((__const char *s))
-{
-#if 0
- extern int sys_nerr;
- extern char *sys_errlist[];
- char *str = _buf();
-
- if (str == 0)
- return (0);
- (void) sprintf(str, "%s: ", s);
- (void) strcat(str, clnt_sperrno(rpc_createerr.cf_stat));
- switch (rpc_createerr.cf_stat) {
- case RPC_PMAPFAILURE:
- (void) strcat(str, " - ");
- (void) strcat(str, clnt_sperrno(rpc_createerr.cf_error.re_status));
- break;
-
- case RPC_SYSTEMERROR:
- (void) strcat(str, " - ");
- if (rpc_createerr.cf_error.re_errno > 0
- && rpc_createerr.cf_error.re_errno < sys_nerr)
- (void) strcat(str,
- sys_errlist[rpc_createerr.cf_error.re_errno]);
- else
- (void) sprintf(&str[strlen(str)], "Error %d",
- rpc_createerr.cf_error.re_errno);
- break;
- }
- (void) strcat(str, "\n");
- return (str);
-#endif
- return(0);
-}
-
-extern void clnt_pcreateerror __P ((__const char *s))
-{
- (void) fprintf(stderr, "%s", clnt_spcreateerror(s));
-}
-
-struct auth_errtab {
- enum auth_stat status;
- char *message;
-};
-
-#if 0
-static struct auth_errtab auth_errlist[] = {
- {AUTH_OK,
- "Authentication OK"},
- {AUTH_BADCRED,
- "Invalid client credential"},
- {AUTH_REJECTEDCRED,
- "Server rejected credential"},
- {AUTH_BADVERF,
- "Invalid client verifier"},
- {AUTH_REJECTEDVERF,
- "Server rejected verifier"},
- {AUTH_TOOWEAK,
- "Client credential too weak"},
- {AUTH_INVALIDRESP,
- "Invalid server verifier"},
- {AUTH_FAILED,
- "Failed (unspecified error)"},
-};
-
-static char *auth_errmsg(stat)
-enum auth_stat stat;
-{
- int i;
-
- for (i = 0; i < sizeof(auth_errlist) / sizeof(struct auth_errtab); i++) {
- if (auth_errlist[i].status == stat) {
- return (auth_errlist[i].message);
- }
- }
- return (NULL);
-}
-#endif
diff --git a/mdk-stage1/dietlibc/librpc/clnt_raw.c b/mdk-stage1/dietlibc/librpc/clnt_raw.c
deleted file mode 100644
index 7479b55d6..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_raw.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* @(#)clnt_raw.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)clnt_raw.c 1.22 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * clnt_raw.c
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * Memory based rpc for simple testing and timing.
- * Interface to create an rpc client and server in the same process.
- * This lets us similate rpc and get round trip overhead, without
- * any interference from the kernal.
- */
-
-#include <rpc/rpc.h>
-
-#define MCALL_MSG_SIZE 24
-
-/*
- * This is the "network" we will be moving stuff over.
- */
-static struct clntraw_private {
- CLIENT client_object;
- XDR xdr_stream;
- char _raw_buf[UDPMSGSIZE];
- char mashl_callmsg[MCALL_MSG_SIZE];
- u_int mcnt;
-} *clntraw_private;
-
-static enum clnt_stat clntraw_call();
-static void clntraw_abort();
-static void clntraw_geterr();
-static bool_t clntraw_freeres();
-static bool_t clntraw_control();
-static void clntraw_destroy();
-
-static struct clnt_ops client_ops = {
- clntraw_call,
- clntraw_abort,
- clntraw_geterr,
- clntraw_freeres,
- clntraw_destroy,
- clntraw_control
-};
-
-void svc_getreq();
-
-/*
- * Create a client handle for memory based rpc.
- */
-CLIENT *clntraw_create(prog, vers)
-u_long prog;
-u_long vers;
-{
- register struct clntraw_private *clp = clntraw_private;
- struct rpc_msg call_msg;
- XDR *xdrs = &clp->xdr_stream;
- CLIENT *client = &clp->client_object;
-
- if (clp == 0) {
- clp = (struct clntraw_private *) calloc(1, sizeof(*clp));
- if (clp == 0)
- return (0);
- clntraw_private = clp;
- }
- /*
- * pre-serialize the staic part of the call msg and stash it away
- */
- call_msg.rm_direction = CALL;
- call_msg.rm_call.cb_rpcvers = RPC_MSG_VERSION;
- call_msg.rm_call.cb_prog = prog;
- call_msg.rm_call.cb_vers = vers;
- xdrmem_create(xdrs, clp->mashl_callmsg, MCALL_MSG_SIZE, XDR_ENCODE);
- if (!xdr_callhdr(xdrs, &call_msg)) {
- perror("clnt_raw.c - Fatal header serialization error.");
- }
- clp->mcnt = XDR_GETPOS(xdrs);
- XDR_DESTROY(xdrs);
-
- /*
- * Set xdrmem for client/server shared buffer
- */
- xdrmem_create(xdrs, clp->_raw_buf, UDPMSGSIZE, XDR_FREE);
-
- /*
- * create client handle
- */
- client->cl_ops = &client_ops;
- client->cl_auth = authnone_create();
- return (client);
-}
-
-static enum clnt_stat
-clntraw_call(h, proc, xargs, argsp, xresults, resultsp, timeout)
-CLIENT *h;
-u_long proc;
-xdrproc_t xargs;
-caddr_t argsp;
-xdrproc_t xresults;
-caddr_t resultsp;
-struct timeval timeout;
-{
- register struct clntraw_private *clp = clntraw_private;
- register XDR *xdrs = &clp->xdr_stream;
- struct rpc_msg msg;
- enum clnt_stat status;
- struct rpc_err error;
-
- if (clp == 0)
- return (RPC_FAILED);
- call_again:
- /*
- * send request
- */
- xdrs->x_op = XDR_ENCODE;
- XDR_SETPOS(xdrs, 0);
- ((struct rpc_msg *) clp->mashl_callmsg)->rm_xid++;
- if ((!XDR_PUTBYTES(xdrs, clp->mashl_callmsg, clp->mcnt)) ||
- (!XDR_PUTLONG(xdrs, (long *) &proc)) ||
- (!AUTH_MARSHALL(h->cl_auth, xdrs)) || (!(*xargs) (xdrs, argsp))) {
- return (RPC_CANTENCODEARGS);
- }
- (void) XDR_GETPOS(xdrs); /* called just to cause overhead */
-
- /*
- * We have to call server input routine here because this is
- * all going on in one process. Yuk.
- */
- svc_getreq(1);
-
- /*
- * get results
- */
- xdrs->x_op = XDR_DECODE;
- XDR_SETPOS(xdrs, 0);
- msg.acpted_rply.ar_verf = _null_auth;
- msg.acpted_rply.ar_results.where = resultsp;
- msg.acpted_rply.ar_results.proc = xresults;
- if (!xdr_replymsg(xdrs, &msg))
- return (RPC_CANTDECODERES);
- _seterr_reply(&msg, &error);
- status = error.re_status;
-
- if (status == RPC_SUCCESS) {
- if (!AUTH_VALIDATE(h->cl_auth, &msg.acpted_rply.ar_verf)) {
- status = RPC_AUTHERROR;
- }
- } /* end successful completion */
- else {
- if (AUTH_REFRESH(h->cl_auth))
- goto call_again;
- } /* end of unsuccessful completion */
-
- if (status == RPC_SUCCESS) {
- if (!AUTH_VALIDATE(h->cl_auth, &msg.acpted_rply.ar_verf)) {
- status = RPC_AUTHERROR;
- }
- if (msg.acpted_rply.ar_verf.oa_base != NULL) {
- xdrs->x_op = XDR_FREE;
- (void) xdr_opaque_auth(xdrs, &(msg.acpted_rply.ar_verf));
- }
- }
-
- return (status);
-}
-
-static void clntraw_geterr()
-{
-}
-
-
-static bool_t clntraw_freeres(cl, xdr_res, res_ptr)
-CLIENT *cl;
-xdrproc_t xdr_res;
-caddr_t res_ptr;
-{
- register struct clntraw_private *clp = clntraw_private;
- register XDR *xdrs = &clp->xdr_stream;
- bool_t rval;
-
- if (clp == 0) {
- rval = (bool_t) RPC_FAILED;
- return (rval);
- }
- xdrs->x_op = XDR_FREE;
- return ((*xdr_res) (xdrs, res_ptr));
-}
-
-static void clntraw_abort()
-{
-}
-
-static bool_t clntraw_control()
-{
- return (FALSE);
-}
-
-static void clntraw_destroy()
-{
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_simple.c b/mdk-stage1/dietlibc/librpc/clnt_simple.c
deleted file mode 100644
index f309f86ff..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_simple.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* @(#)clnt_simple.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)clnt_simple.c 1.35 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * clnt_simple.c
- * Simplified front end to rpc.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <netdb.h>
-#include <string.h>
-
-static struct callrpc_private {
- CLIENT *client;
- int socket;
- int oldprognum, oldversnum, valid;
- char *oldhost;
-} *callrpc_private;
-
-int callrpc (const char *host, const u_long prognum,
- const u_long versnum, const u_long procnum,
- const xdrproc_t inproc, const char *in,
- const xdrproc_t outproc, char *out)
-{
- register struct callrpc_private *crp = callrpc_private;
- struct sockaddr_in server_addr;
- enum clnt_stat clnt_stat;
- struct hostent *hp;
- struct timeval timeout, tottimeout;
-
- if (crp == 0) {
- crp = (struct callrpc_private *) calloc(1, sizeof(*crp));
- if (crp == 0)
- return (0);
- callrpc_private = crp;
- }
- if (crp->oldhost == NULL) {
- crp->oldhost = malloc(256);
- crp->oldhost[0] = 0;
- crp->socket = RPC_ANYSOCK;
- }
- if (crp->valid && crp->oldprognum == prognum
- && crp->oldversnum == versnum && strcmp(crp->oldhost, host) == 0) {
- /* reuse old client */
- } else {
- crp->valid = 0;
- (void) close(crp->socket);
- crp->socket = RPC_ANYSOCK;
- if (crp->client) {
- clnt_destroy(crp->client);
- crp->client = NULL;
- }
- if ((hp = gethostbyname(host)) == NULL)
- return ((int) RPC_UNKNOWNHOST);
- timeout.tv_usec = 0;
- timeout.tv_sec = 5;
- bcopy(hp->h_addr, (char *) &server_addr.sin_addr, hp->h_length);
- server_addr.sin_family = AF_INET;
- server_addr.sin_port = 0;
- if ((crp->client = clntudp_create(&server_addr, (u_long) prognum,
- (u_long) versnum, timeout,
- &crp->socket)) == NULL)
- return ((int) rpc_createerr.cf_stat);
- crp->valid = 1;
- crp->oldprognum = prognum;
- crp->oldversnum = versnum;
- (void) strcpy(crp->oldhost, host);
- }
- tottimeout.tv_sec = 25;
- tottimeout.tv_usec = 0;
- clnt_stat = clnt_call(crp->client, procnum, inproc, (char*)in,
- outproc, out, tottimeout);
- /*
- * if call failed, empty cache
- */
- if (clnt_stat != RPC_SUCCESS)
- crp->valid = 0;
- return ((int) clnt_stat);
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_tcp.c b/mdk-stage1/dietlibc/librpc/clnt_tcp.c
deleted file mode 100644
index 8c39e8933..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_tcp.c
+++ /dev/null
@@ -1,463 +0,0 @@
-/* @(#)clnt_tcp.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)clnt_tcp.c 1.37 87/10/05 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * clnt_tcp.c, Implements a TCP/IP based, client side RPC.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * TCP based RPC supports 'batched calls'.
- * A sequence of calls may be batched-up in a send buffer. The rpc call
- * return immediately to the client even though the call was not necessarily
- * sent. The batching occurs if the results' xdr routine is NULL (0) AND
- * the rpc timeout value is zero (see clnt.h, rpc).
- *
- * Clients should NOT casually batch calls that in fact return results; that is,
- * the server side should be aware that a call is batched and not produce any
- * return message. Batched calls that produce many result messages can
- * deadlock (netlock) the client and the server....
- *
- * Now go hang yourself.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <netdb.h>
-#include <errno.h>
-#include <rpc/pmap_clnt.h>
-#include <unistd.h>
-
-#define MCALL_MSG_SIZE 24
-
-extern int errno;
-
-static int readtcp();
-static int writetcp();
-
-static enum clnt_stat clnttcp_call();
-static void clnttcp_abort();
-static void clnttcp_geterr();
-static bool_t clnttcp_freeres();
-static bool_t clnttcp_control();
-static void clnttcp_destroy();
-
-static struct clnt_ops tcp_ops = {
- clnttcp_call,
- clnttcp_abort,
- clnttcp_geterr,
- clnttcp_freeres,
- clnttcp_destroy,
- clnttcp_control
-};
-
-struct ct_data {
- int ct_sock;
- bool_t ct_closeit;
- struct timeval ct_wait;
- bool_t ct_waitset; /* wait set by clnt_control? */
- struct sockaddr_in ct_addr;
- struct rpc_err ct_error;
- char ct_mcall[MCALL_MSG_SIZE]; /* marshalled callmsg */
- u_int ct_mpos; /* pos after marshal */
- XDR ct_xdrs;
-};
-
-/*
- * Create a client handle for a tcp/ip connection.
- * If *sockp<0, *sockp is set to a newly created TCP socket and it is
- * connected to raddr. If *sockp non-negative then
- * raddr is ignored. The rpc/tcp package does buffering
- * similar to stdio, so the client must pick send and receive buffer sizes,];
- * 0 => use the default.
- * If raddr->sin_port is 0, then a binder on the remote machine is
- * consulted for the right port number.
- * NB: *sockp is copied into a private area.
- * NB: It is the clients responsibility to close *sockp.
- * NB: The rpch->cl_auth is set null authentication. Caller may wish to set this
- * something more useful.
- */
-CLIENT *clnttcp_create(raddr, prog, vers, sockp, sendsz, recvsz)
-struct sockaddr_in *raddr;
-u_long prog;
-u_long vers;
-register int *sockp;
-u_int sendsz;
-u_int recvsz;
-{
- CLIENT *h;
- register struct ct_data *ct;
- struct timeval now;
- struct rpc_msg call_msg;
-
- h = (CLIENT *) mem_alloc(sizeof(*h));
- if (h == NULL) {
- (void) fprintf(stderr, "clnttcp_create: out of memory\n");
- rpc_createerr.cf_stat = RPC_SYSTEMERROR;
- rpc_createerr.cf_error.re_errno = errno;
- goto fooy;
- }
- ct = (struct ct_data *) mem_alloc(sizeof(*ct));
- if (ct == NULL) {
- (void) fprintf(stderr, "clnttcp_create: out of memory\n");
- rpc_createerr.cf_stat = RPC_SYSTEMERROR;
- rpc_createerr.cf_error.re_errno = errno;
- goto fooy;
- }
-
- /*
- * If no port number given ask the pmap for one
- */
- if (raddr->sin_port == 0) {
- u_short port;
-
- if ((port = pmap_getport(raddr, prog, vers, IPPROTO_TCP)) == 0) {
- mem_free((caddr_t) ct, sizeof(struct ct_data));
-
- mem_free((caddr_t) h, sizeof(CLIENT));
- return ((CLIENT *) NULL);
- }
- raddr->sin_port = htons(port);
- }
-
- /*
- * If no socket given, open one
- */
- if (*sockp < 0) {
- *sockp = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
- (void) bindresvport(*sockp, (struct sockaddr_in *) 0);
- if ((*sockp < 0)
- || (connect(*sockp, (struct sockaddr *) raddr,
- sizeof(*raddr)) < 0)) {
- rpc_createerr.cf_stat = RPC_SYSTEMERROR;
- rpc_createerr.cf_error.re_errno = errno;
- (void) close(*sockp);
- goto fooy;
- }
- ct->ct_closeit = TRUE;
- } else {
- ct->ct_closeit = FALSE;
- }
-
- /*
- * Set up private data struct
- */
- ct->ct_sock = *sockp;
- ct->ct_wait.tv_usec = 0;
- ct->ct_waitset = FALSE;
- ct->ct_addr = *raddr;
-
- /*
- * Initialize call message
- */
- (void) gettimeofday(&now, (struct timezone *) 0);
- call_msg.rm_xid = getpid() ^ now.tv_sec ^ now.tv_usec;
- call_msg.rm_direction = CALL;
- call_msg.rm_call.cb_rpcvers = RPC_MSG_VERSION;
- call_msg.rm_call.cb_prog = prog;
- call_msg.rm_call.cb_vers = vers;
-
- /*
- * pre-serialize the staic part of the call msg and stash it away
- */
- xdrmem_create(&(ct->ct_xdrs), ct->ct_mcall, MCALL_MSG_SIZE,
- XDR_ENCODE);
- if (!xdr_callhdr(&(ct->ct_xdrs), &call_msg)) {
- if (ct->ct_closeit) {
- (void) close(*sockp);
- }
- goto fooy;
- }
- ct->ct_mpos = XDR_GETPOS(&(ct->ct_xdrs));
- XDR_DESTROY(&(ct->ct_xdrs));
-
- /*
- * Create a client handle which uses xdrrec for serialization
- * and authnone for authentication.
- */
- xdrrec_create(&(ct->ct_xdrs), sendsz, recvsz,
- (caddr_t) ct, readtcp, writetcp);
- h->cl_ops = &tcp_ops;
- h->cl_private = (caddr_t) ct;
- h->cl_auth = authnone_create();
- return (h);
-
- fooy:
- /*
- * Something goofed, free stuff and barf
- */
- mem_free((caddr_t) ct, sizeof(struct ct_data));
-
- mem_free((caddr_t) h, sizeof(CLIENT));
- return ((CLIENT *) NULL);
-}
-
-static enum clnt_stat
-clnttcp_call(h, proc, xdr_args, args_ptr, xdr_results, results_ptr,
- timeout)
-register CLIENT *h;
-u_long proc;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-xdrproc_t xdr_results;
-caddr_t results_ptr;
-struct timeval timeout;
-{
- register struct ct_data *ct = (struct ct_data *) h->cl_private;
- register XDR *xdrs = &(ct->ct_xdrs);
- struct rpc_msg reply_msg;
- u_long x_id;
- u_long *msg_x_id = (u_long *) (ct->ct_mcall); /* yuk */
- register bool_t shipnow;
- int refreshes = 2;
-
- if (!ct->ct_waitset) {
- ct->ct_wait = timeout;
- }
-
- shipnow =
- (xdr_results == (xdrproc_t) 0 && timeout.tv_sec == 0
- && timeout.tv_usec == 0) ? FALSE : TRUE;
-
- call_again:
- xdrs->x_op = XDR_ENCODE;
- ct->ct_error.re_status = RPC_SUCCESS;
- x_id = ntohl(--(*msg_x_id));
- if ((!XDR_PUTBYTES(xdrs, ct->ct_mcall, ct->ct_mpos)) ||
- (!XDR_PUTLONG(xdrs, (long *) &proc)) ||
- (!AUTH_MARSHALL(h->cl_auth, xdrs)) ||
- (!(*xdr_args) (xdrs, args_ptr))) {
- if (ct->ct_error.re_status == RPC_SUCCESS)
- ct->ct_error.re_status = RPC_CANTENCODEARGS;
- (void) xdrrec_endofrecord(xdrs, TRUE);
- return (ct->ct_error.re_status);
- }
- if (!xdrrec_endofrecord(xdrs, shipnow))
- return (ct->ct_error.re_status = RPC_CANTSEND);
- if (!shipnow)
- return (RPC_SUCCESS);
- /*
- * Hack to provide rpc-based message passing
- */
- if (timeout.tv_sec == 0 && timeout.tv_usec == 0) {
- return (ct->ct_error.re_status = RPC_TIMEDOUT);
- }
-
-
- /*
- * Keep receiving until we get a valid transaction id
- */
- xdrs->x_op = XDR_DECODE;
- while (TRUE) {
- reply_msg.acpted_rply.ar_verf = _null_auth;
- reply_msg.acpted_rply.ar_results.where = NULL;
- reply_msg.acpted_rply.ar_results.proc = (xdrproc_t)xdr_void;
- if (!xdrrec_skiprecord(xdrs))
- return (ct->ct_error.re_status);
- /* now decode and validate the response header */
- if (!xdr_replymsg(xdrs, &reply_msg)) {
- if (ct->ct_error.re_status == RPC_SUCCESS)
- continue;
- return (ct->ct_error.re_status);
- }
- if (reply_msg.rm_xid == x_id)
- break;
- }
-
- /*
- * process header
- */
- _seterr_reply(&reply_msg, &(ct->ct_error));
- if (ct->ct_error.re_status == RPC_SUCCESS) {
- if (!AUTH_VALIDATE(h->cl_auth, &reply_msg.acpted_rply.ar_verf)) {
- ct->ct_error.re_status = RPC_AUTHERROR;
- ct->ct_error.re_why = AUTH_INVALIDRESP;
- } else if (!(*xdr_results) (xdrs, results_ptr)) {
- if (ct->ct_error.re_status == RPC_SUCCESS)
- ct->ct_error.re_status = RPC_CANTDECODERES;
- }
- /* free verifier ... */
- if (reply_msg.acpted_rply.ar_verf.oa_base != NULL) {
- xdrs->x_op = XDR_FREE;
- (void) xdr_opaque_auth(xdrs, &(reply_msg.acpted_rply.ar_verf));
- }
- } /* end successful completion */
- else {
- /* maybe our credentials need to be refreshed ... */
- if (refreshes-- && AUTH_REFRESH(h->cl_auth))
- goto call_again;
- } /* end of unsuccessful completion */
- return (ct->ct_error.re_status);
-}
-
-static void clnttcp_geterr(h, errp)
-CLIENT *h;
-struct rpc_err *errp;
-{
- register struct ct_data *ct = (struct ct_data *) h->cl_private;
-
- *errp = ct->ct_error;
-}
-
-static bool_t clnttcp_freeres(cl, xdr_res, res_ptr)
-CLIENT *cl;
-xdrproc_t xdr_res;
-caddr_t res_ptr;
-{
- register struct ct_data *ct = (struct ct_data *) cl->cl_private;
- register XDR *xdrs = &(ct->ct_xdrs);
-
- xdrs->x_op = XDR_FREE;
- return ((*xdr_res) (xdrs, res_ptr));
-}
-
-static void clnttcp_abort()
-{
-}
-
-static bool_t clnttcp_control(cl, request, info)
-CLIENT *cl;
-int request;
-char *info;
-{
- register struct ct_data *ct = (struct ct_data *) cl->cl_private;
-
- switch (request) {
- case CLSET_TIMEOUT:
- ct->ct_wait = *(struct timeval *) info;
- ct->ct_waitset = TRUE;
- break;
- case CLGET_TIMEOUT:
- *(struct timeval *) info = ct->ct_wait;
- break;
- case CLGET_SERVER_ADDR:
- *(struct sockaddr_in *) info = ct->ct_addr;
- break;
- default:
- return (FALSE);
- }
- return (TRUE);
-}
-
-
-static void clnttcp_destroy(h)
-CLIENT *h;
-{
- register struct ct_data *ct = (struct ct_data *) h->cl_private;
-
- if (ct->ct_closeit) {
- (void) close(ct->ct_sock);
- }
- XDR_DESTROY(&(ct->ct_xdrs));
- mem_free((caddr_t) ct, sizeof(struct ct_data));
-
- mem_free((caddr_t) h, sizeof(CLIENT));
-}
-
-/*
- * Interface between xdr serializer and tcp connection.
- * Behaves like the system calls, read & write, but keeps some error state
- * around for the rpc level.
- */
-static int readtcp(ct, buf, len)
-register struct ct_data *ct;
-caddr_t buf;
-register int len;
-{
-#ifdef FD_SETSIZE
- fd_set mask;
- fd_set readfds;
-
- if (len == 0)
- return (0);
- FD_ZERO(&mask);
- FD_SET(ct->ct_sock, &mask);
-#else
- register int mask = 1 << (ct->ct_sock);
- int readfds;
-
- if (len == 0)
- return (0);
-
-#endif /* def FD_SETSIZE */
- while (TRUE) {
- readfds = mask;
- switch (select
- (_rpc_dtablesize(), &readfds, 0, 0,
- &(ct->ct_wait))) {
- case 0:
- ct->ct_error.re_status = RPC_TIMEDOUT;
- return (-1);
-
- case -1:
- if (errno == EINTR)
- continue;
- ct->ct_error.re_status = RPC_CANTRECV;
- ct->ct_error.re_errno = errno;
- return (-1);
- }
- break;
- }
- switch (len = read(ct->ct_sock, buf, len)) {
-
- case 0:
- /* premature eof */
- ct->ct_error.re_errno = ECONNRESET;
- ct->ct_error.re_status = RPC_CANTRECV;
- len = -1; /* it's really an error */
- break;
-
- case -1:
- ct->ct_error.re_errno = errno;
- ct->ct_error.re_status = RPC_CANTRECV;
- break;
- }
- return (len);
-}
-
-static int writetcp(ct, buf, len)
-struct ct_data *ct;
-caddr_t buf;
-int len;
-{
- register int i, cnt;
-
- for (cnt = len; cnt > 0; cnt -= i, buf += i) {
- if ((i = write(ct->ct_sock, buf, cnt)) == -1) {
- ct->ct_error.re_errno = errno;
- ct->ct_error.re_status = RPC_CANTSEND;
- return (-1);
- }
- }
- return (len);
-}
diff --git a/mdk-stage1/dietlibc/librpc/clnt_udp.c b/mdk-stage1/dietlibc/librpc/clnt_udp.c
deleted file mode 100644
index 7305d3ff1..000000000
--- a/mdk-stage1/dietlibc/librpc/clnt_udp.c
+++ /dev/null
@@ -1,437 +0,0 @@
-/* @(#)clnt_udp.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)clnt_udp.c 1.39 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * clnt_udp.c, Implements a UDP/IP based, client side RPC.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <netdb.h>
-#include <errno.h>
-#include <rpc/pmap_clnt.h>
-#include <unistd.h>
-
-extern int errno;
-
-/*
- * UDP bases client side rpc operations
- */
-static enum clnt_stat clntudp_call();
-static void clntudp_abort();
-static void clntudp_geterr();
-static bool_t clntudp_freeres();
-static bool_t clntudp_control();
-static void clntudp_destroy();
-
-static struct clnt_ops udp_ops = {
- clntudp_call,
- clntudp_abort,
- clntudp_geterr,
- clntudp_freeres,
- clntudp_destroy,
- clntudp_control
-};
-
-/*
- * Private data kept per client handle
- */
-struct cu_data {
- int cu_sock;
- bool_t cu_closeit;
- struct sockaddr_in cu_raddr;
- int cu_rlen;
- struct timeval cu_wait;
- struct timeval cu_total;
- struct rpc_err cu_error;
- XDR cu_outxdrs;
- u_int cu_xdrpos;
- u_int cu_sendsz;
- char *cu_outbuf;
- u_int cu_recvsz;
- char cu_inbuf[1];
-};
-
-/*
- * Create a UDP based client handle.
- * If *sockp<0, *sockp is set to a newly created UPD socket.
- * If raddr->sin_port is 0 a binder on the remote machine
- * is consulted for the correct port number.
- * NB: It is the clients responsibility to close *sockp.
- * NB: The rpch->cl_auth is initialized to null authentication.
- * Caller may wish to set this something more useful.
- *
- * wait is the amount of time used between retransmitting a call if
- * no response has been heard; retransmition occurs until the actual
- * rpc call times out.
- *
- * sendsz and recvsz are the maximum allowable packet sizes that can be
- * sent and received.
- */
-CLIENT *clntudp_bufcreate(raddr, program, version, wait, sockp, sendsz,
- recvsz)
-struct sockaddr_in *raddr;
-u_long program;
-u_long version;
-struct timeval wait;
-register int *sockp;
-u_int sendsz;
-u_int recvsz;
-{
- CLIENT *cl;
- register struct cu_data *cu;
- struct timeval now;
- struct rpc_msg call_msg;
-
- cl = (CLIENT *) mem_alloc(sizeof(CLIENT));
- if (cl == NULL) {
- (void) fprintf(stderr, "clntudp_create: out of memory\n");
- rpc_createerr.cf_stat = RPC_SYSTEMERROR;
- rpc_createerr.cf_error.re_errno = errno;
- goto fooy;
- }
- sendsz = ((sendsz + 3) / 4) * 4;
- recvsz = ((recvsz + 3) / 4) * 4;
- cu = (struct cu_data *) mem_alloc(sizeof(*cu) + sendsz + recvsz);
- if (cu == NULL) {
- (void) fprintf(stderr, "clntudp_create: out of memory\n");
- rpc_createerr.cf_stat = RPC_SYSTEMERROR;
- rpc_createerr.cf_error.re_errno = errno;
- goto fooy;
- }
- cu->cu_outbuf = &cu->cu_inbuf[recvsz];
-
- (void) gettimeofday(&now, (struct timezone *) 0);
- if (raddr->sin_port == 0) {
- u_short port;
-
- if ((port =
- pmap_getport(raddr, program, version, IPPROTO_UDP)) == 0) {
- goto fooy;
- }
- raddr->sin_port = htons(port);
- }
- cl->cl_ops = &udp_ops;
- cl->cl_private = (caddr_t) cu;
- cu->cu_raddr = *raddr;
- cu->cu_rlen = sizeof(cu->cu_raddr);
- cu->cu_wait = wait;
- cu->cu_total.tv_sec = -1;
- cu->cu_total.tv_usec = -1;
- cu->cu_sendsz = sendsz;
- cu->cu_recvsz = recvsz;
- call_msg.rm_xid = getpid() ^ now.tv_sec ^ now.tv_usec;
- call_msg.rm_direction = CALL;
- call_msg.rm_call.cb_rpcvers = RPC_MSG_VERSION;
- call_msg.rm_call.cb_prog = program;
- call_msg.rm_call.cb_vers = version;
- xdrmem_create(&(cu->cu_outxdrs), cu->cu_outbuf, sendsz, XDR_ENCODE);
- if (!xdr_callhdr(&(cu->cu_outxdrs), &call_msg)) {
- goto fooy;
- }
- cu->cu_xdrpos = XDR_GETPOS(&(cu->cu_outxdrs));
- if (*sockp < 0) {
- int dontblock = 1;
-
- *sockp = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
- if (*sockp < 0) {
- rpc_createerr.cf_stat = RPC_SYSTEMERROR;
- rpc_createerr.cf_error.re_errno = errno;
- goto fooy;
- }
- /* attempt to bind to prov port */
- (void) bindresvport(*sockp, (struct sockaddr_in *) 0);
- /* the sockets rpc controls are non-blocking */
- (void) ioctl(*sockp, FIONBIO, (char *) &dontblock);
- cu->cu_closeit = TRUE;
- } else {
- cu->cu_closeit = FALSE;
- }
- cu->cu_sock = *sockp;
- cl->cl_auth = authnone_create();
- return (cl);
- fooy:
- if (cu)
- mem_free((caddr_t) cu, sizeof(*cu) + sendsz + recvsz);
- if (cl)
- mem_free((caddr_t) cl, sizeof(CLIENT));
- return ((CLIENT *) NULL);
-}
-
-CLIENT *clntudp_create(raddr, program, version, wait, sockp)
-struct sockaddr_in *raddr;
-u_long program;
-u_long version;
-struct timeval wait;
-register int *sockp;
-{
-
- return (clntudp_bufcreate(raddr, program, version, wait, sockp,
- UDPMSGSIZE, UDPMSGSIZE));
-}
-
-static enum clnt_stat
-clntudp_call(cl, proc, xargs, argsp, xresults, resultsp, utimeout)
-register CLIENT *cl; /* client handle */
-u_long proc; /* procedure number */
-xdrproc_t xargs; /* xdr routine for args */
-caddr_t argsp; /* pointer to args */
-xdrproc_t xresults; /* xdr routine for results */
-caddr_t resultsp; /* pointer to results */
-struct timeval utimeout; /* seconds to wait before giving up */
-{
- register struct cu_data *cu = (struct cu_data *) cl->cl_private;
- register XDR *xdrs;
- register int outlen;
- register int inlen;
- int fromlen;
-
-#ifdef FD_SETSIZE
- fd_set readfds;
- fd_set mask;
-#else
- int readfds;
- register int mask;
-#endif /* def FD_SETSIZE */
- struct sockaddr_in from;
- struct rpc_msg reply_msg;
- XDR reply_xdrs;
- struct timeval time_waited;
- bool_t ok;
- int nrefreshes = 2; /* number of times to refresh cred */
- struct timeval timeout;
-
- if (cu->cu_total.tv_usec == -1) {
- timeout = utimeout; /* use supplied timeout */
- } else {
- timeout = cu->cu_total; /* use default timeout */
- }
-
- time_waited.tv_sec = 0;
- time_waited.tv_usec = 0;
- call_again:
- xdrs = &(cu->cu_outxdrs);
- xdrs->x_op = XDR_ENCODE;
- XDR_SETPOS(xdrs, cu->cu_xdrpos);
- /*
- * the transaction is the first thing in the out buffer
- */
- (*(u_short *) (cu->cu_outbuf))++;
- if ((!XDR_PUTLONG(xdrs, (long *) &proc)) ||
- (!AUTH_MARSHALL(cl->cl_auth, xdrs)) || (!(*xargs) (xdrs, argsp)))
- return (cu->cu_error.re_status = RPC_CANTENCODEARGS);
- outlen = (int) XDR_GETPOS(xdrs);
-
- send_again:
- if (sendto(cu->cu_sock, cu->cu_outbuf, outlen, 0,
- (struct sockaddr *) &(cu->cu_raddr), cu->cu_rlen)
- != outlen) {
- cu->cu_error.re_errno = errno;
- return (cu->cu_error.re_status = RPC_CANTSEND);
- }
-
- /*
- * Hack to provide rpc-based message passing
- */
- if (timeout.tv_sec == 0 && timeout.tv_usec == 0) {
- return (cu->cu_error.re_status = RPC_TIMEDOUT);
- }
- /*
- * sub-optimal code appears here because we have
- * some clock time to spare while the packets are in flight.
- * (We assume that this is actually only executed once.)
- */
- reply_msg.acpted_rply.ar_verf = _null_auth;
- reply_msg.acpted_rply.ar_results.where = resultsp;
- reply_msg.acpted_rply.ar_results.proc = xresults;
-#ifdef FD_SETSIZE
- FD_ZERO(&mask);
- FD_SET(cu->cu_sock, &mask);
-#else
- mask = 1 << cu->cu_sock;
-#endif /* def FD_SETSIZE */
- for (;;) {
- readfds = mask;
- switch (select(_rpc_dtablesize(), &readfds, 0, 0, &(cu->cu_wait))) {
-
- case 0:
- time_waited.tv_sec += cu->cu_wait.tv_sec;
- time_waited.tv_usec += cu->cu_wait.tv_usec;
- while (time_waited.tv_usec >= 1000000) {
- time_waited.tv_sec++;
- time_waited.tv_usec -= 1000000;
- }
- if ((time_waited.tv_sec < timeout.tv_sec) ||
- ((time_waited.tv_sec == timeout.tv_sec) &&
- (time_waited.tv_usec < timeout.tv_usec)))
- goto send_again;
- return (cu->cu_error.re_status = RPC_TIMEDOUT);
-
- /*
- * buggy in other cases because time_waited is not being
- * updated.
- */
- case -1:
- if (errno == EINTR)
- continue;
- cu->cu_error.re_errno = errno;
- return (cu->cu_error.re_status = RPC_CANTRECV);
- }
- do {
- fromlen = sizeof(struct sockaddr);
-
- inlen = recvfrom(cu->cu_sock, cu->cu_inbuf,
- (int) cu->cu_recvsz, 0,
- (struct sockaddr *) &from, &fromlen);
- } while (inlen < 0 && errno == EINTR);
- if (inlen < 0) {
- if (errno == EWOULDBLOCK)
- continue;
- cu->cu_error.re_errno = errno;
- return (cu->cu_error.re_status = RPC_CANTRECV);
- }
- if (inlen < sizeof(u_long))
- continue;
- /* see if reply transaction id matches sent id */
- if (*((u_long *) (cu->cu_inbuf)) != *((u_long *) (cu->cu_outbuf)))
- continue;
- /* we now assume we have the proper reply */
- break;
- }
-
- /*
- * now decode and validate the response
- */
- xdrmem_create(&reply_xdrs, cu->cu_inbuf, (u_int) inlen, XDR_DECODE);
- ok = xdr_replymsg(&reply_xdrs, &reply_msg);
- /* XDR_DESTROY(&reply_xdrs); save a few cycles on noop destroy */
- if (ok) {
- _seterr_reply(&reply_msg, &(cu->cu_error));
- if (cu->cu_error.re_status == RPC_SUCCESS) {
- if (!AUTH_VALIDATE(cl->cl_auth,
- &reply_msg.acpted_rply.ar_verf)) {
- cu->cu_error.re_status = RPC_AUTHERROR;
- cu->cu_error.re_why = AUTH_INVALIDRESP;
- }
- if (reply_msg.acpted_rply.ar_verf.oa_base != NULL) {
- xdrs->x_op = XDR_FREE;
- (void) xdr_opaque_auth(xdrs,
- &(reply_msg.acpted_rply.ar_verf));
- }
- } /* end successful completion */
- else {
- /* maybe our credentials need to be refreshed ... */
- if (nrefreshes > 0 && AUTH_REFRESH(cl->cl_auth)) {
- nrefreshes--;
- goto call_again;
- }
- } /* end of unsuccessful completion */
- } /* end of valid reply message */
- else {
- cu->cu_error.re_status = RPC_CANTDECODERES;
- }
- return (cu->cu_error.re_status);
-}
-
-static void clntudp_geterr(cl, errp)
-CLIENT *cl;
-struct rpc_err *errp;
-{
- register struct cu_data *cu = (struct cu_data *) cl->cl_private;
-
- *errp = cu->cu_error;
-}
-
-
-static bool_t clntudp_freeres(cl, xdr_res, res_ptr)
-CLIENT *cl;
-xdrproc_t xdr_res;
-caddr_t res_ptr;
-{
- register struct cu_data *cu = (struct cu_data *) cl->cl_private;
- register XDR *xdrs = &(cu->cu_outxdrs);
-
- xdrs->x_op = XDR_FREE;
- return ((*xdr_res) (xdrs, res_ptr));
-}
-
-static void clntudp_abort( /*h */ )
- /*CLIENT *h; */
-{
-}
-
-static bool_t clntudp_control(cl, request, info)
-CLIENT *cl;
-int request;
-char *info;
-{
- register struct cu_data *cu = (struct cu_data *) cl->cl_private;
-
- switch (request) {
- case CLSET_TIMEOUT:
- cu->cu_total = *(struct timeval *) info;
- break;
- case CLGET_TIMEOUT:
- *(struct timeval *) info = cu->cu_total;
- break;
- case CLSET_RETRY_TIMEOUT:
- cu->cu_wait = *(struct timeval *) info;
- break;
- case CLGET_RETRY_TIMEOUT:
- *(struct timeval *) info = cu->cu_wait;
- break;
- case CLGET_SERVER_ADDR:
- *(struct sockaddr_in *) info = cu->cu_raddr;
- break;
- default:
- return (FALSE);
- }
- return (TRUE);
-}
-
-static void clntudp_destroy(cl)
-CLIENT *cl;
-{
- register struct cu_data *cu = (struct cu_data *) cl->cl_private;
-
- if (cu->cu_closeit) {
- (void) close(cu->cu_sock);
- }
- XDR_DESTROY(&(cu->cu_outxdrs));
- mem_free((caddr_t) cu, (sizeof(*cu) + cu->cu_sendsz + cu->cu_recvsz));
- mem_free((caddr_t) cl, sizeof(CLIENT));
-}
diff --git a/mdk-stage1/dietlibc/librpc/get_myaddress.c b/mdk-stage1/dietlibc/librpc/get_myaddress.c
deleted file mode 100644
index cd63383d0..000000000
--- a/mdk-stage1/dietlibc/librpc/get_myaddress.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* @(#)get_myaddress.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)get_myaddress.c 1.4 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * get_myaddress.c
- *
- * Get client's IP address via ioctl. This avoids using the yellowpages.
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/types.h>
-#include <rpc/pmap_prot.h>
-#include <sys/socket.h>
-#include <stdio.h>
-//#include <net/if.h>
-#include <sys/ioctl.h>
-#include <arpa/inet.h>
-#include <netinet/in.h>
-
-/* DO use gethostbyname because it's portable */
-#include <unistd.h>
-#include <netdb.h>
-#include <string.h>
-void get_myaddress(struct sockaddr_in* addr)
-{
- char localhost[256 + 1];
- struct hostent *hp;
-
- gethostname(localhost, 256);
- if ((hp = gethostbyname(localhost)) == NULL) {
- perror("get_myaddress: gethostbyname");
- exit(1);
- }
- addr->sin_family = AF_INET;
- bcopy((char *) hp->h_addr, (char *) &addr->sin_addr, hp->h_length);
- addr->sin_port = htons(PMAPPORT);
-}
diff --git a/mdk-stage1/dietlibc/librpc/getrpcent.c b/mdk-stage1/dietlibc/librpc/getrpcent.c
deleted file mode 100644
index 5e7f694d2..000000000
--- a/mdk-stage1/dietlibc/librpc/getrpcent.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* @(#)getrpcent.c 2.2 88/07/29 4.0 RPCSRC */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)getrpcent.c 1.9 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * Copyright (c) 1985 by Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <rpc/rpc.h>
-#include <netdb.h>
-#include <sys/socket.h>
-#include <string.h>
-
-/*
- * Internet version.
- */
-struct rpcdata {
- FILE *rpcf;
- char *current;
- int currentlen;
- int stayopen;
-#define MAXALIASES 35
- char *rpc_aliases[MAXALIASES];
- struct rpcent rpc;
- char line[BUFSIZ + 1];
- char *domain;
-} *rpcdata;
-
-static struct rpcent *interpret();
-struct hostent *gethostent();
-char *inet_ntoa();
-
-#ifndef __linux__
-static char *index();
-#else
-char *index();
-#endif
-
-static char RPCDB[] = "/etc/rpc";
-
-static struct rpcdata *_rpcdata()
-{
- register struct rpcdata *d = rpcdata;
-
- if (d == 0) {
- d = (struct rpcdata *) calloc(1, sizeof(struct rpcdata));
-
- rpcdata = d;
- }
- return (d);
-}
-
-struct rpcent *getrpcbynumber(number)
-register int number;
-{
- register struct rpcdata *d = _rpcdata();
- register struct rpcent *p;
-
- if (d == 0)
- return (0);
- setrpcent(0);
- while ((p = getrpcent())) {
- if (p->r_number == number)
- break;
- }
- endrpcent();
- return (p);
-}
-
-struct rpcent *
-#ifdef __linux__
-getrpcbyname(const char *name)
-#else
-getrpcbyname(name)
-char *name;
-#endif
-{
- struct rpcent *rpc;
- char **rp;
-
- setrpcent(0);
- while ((rpc = getrpcent())) {
- if (strcmp(rpc->r_name, name) == 0)
- return (rpc);
- for (rp = rpc->r_aliases; *rp != NULL; rp++) {
- if (strcmp(*rp, name) == 0)
- return (rpc);
- }
- }
- endrpcent();
- return (NULL);
-}
-
-#ifdef __linux__
-void
-#endif
-setrpcent(f)
-int f;
-{
- register struct rpcdata *d = _rpcdata();
-
- if (d == 0)
- return;
- if (d->rpcf == NULL)
- d->rpcf = fopen(RPCDB, "r");
- else
- rewind(d->rpcf);
- if (d->current)
- free(d->current);
- d->current = NULL;
- d->stayopen |= f;
-}
-
-#ifdef __linux__
-void
-#endif
-endrpcent()
-{
- register struct rpcdata *d = _rpcdata();
-
- if (d == 0)
- return;
- if (d->current && !d->stayopen) {
- free(d->current);
- d->current = NULL;
- }
- if (d->rpcf && !d->stayopen) {
- fclose(d->rpcf);
- d->rpcf = NULL;
- }
-}
-
-struct rpcent *getrpcent()
-{
- register struct rpcdata *d = _rpcdata();
-
- if (d == 0)
- return (NULL);
- if (d->rpcf == NULL && (d->rpcf = fopen(RPCDB, "r")) == NULL)
- return (NULL);
- if (fgets(d->line, BUFSIZ, d->rpcf) == NULL)
- return (NULL);
- return interpret(d->line, strlen(d->line));
-}
-
-#ifdef __linux__
-static char *firstwhite(s)
-char *s;
-{
- char *s1, *s2;
-
- s1 = index(s, ' ');
- s2 = index(s, '\t');
- if (s1) {
- if (s2)
- return (s1 < s2) ? s1 : s2;
- else
- return s1;
- } else
- return s2;
-}
-#endif
-
-static struct rpcent *interpret(const char* val, int len)
-{
- register struct rpcdata *d = _rpcdata();
- char *p;
- register char *cp, **q;
-
- if (d == 0)
- return 0;
- strncpy(d->line, val, len);
- p = d->line;
- d->line[len] = '\n';
- if (*p == '#')
- return (getrpcent());
- cp = index(p, '#');
- if (cp == NULL) {
- cp = index(p, '\n');
- if (cp == NULL)
- return (getrpcent());
- }
- *cp = '\0';
-#ifdef __linux__
- if ((cp = firstwhite(p)))
- *cp++ = 0;
- else
- return (getrpcent());
-#else
- cp = index(p, ' ');
- if (cp == NULL) {
- cp = index(p, '\t');
- if (cp == NULL)
- return (getrpcent());
- }
- *cp++ = '\0';
-#endif
- /* THIS STUFF IS INTERNET SPECIFIC */
- d->rpc.r_name = d->line;
- while (*cp == ' ' || *cp == '\t')
- cp++;
- d->rpc.r_number = atoi(cp);
- q = d->rpc.r_aliases = d->rpc_aliases;
-#ifdef __linux__
- if ((cp = firstwhite(cp)))
- *cp++ = '\0';
-#else
- cp = index(p, ' ');
- if (cp != NULL)
- *cp++ = '\0';
- else {
- cp = index(p, '\t');
- if (cp != NULL)
- *cp++ = '\0';
- }
-#endif
- while (cp && *cp) {
- if (*cp == ' ' || *cp == '\t') {
- cp++;
- continue;
- }
- if (q < &(d->rpc_aliases[MAXALIASES - 1]))
- *q++ = cp;
-#ifdef __linux__
- if ((cp = firstwhite(cp)))
- *cp++ = '\0';
-#else
- cp = index(p, ' ');
- if (cp != NULL)
- *cp++ = '\0';
- else {
- cp = index(p, '\t');
- if (cp != NULL)
- *cp++ = '\0';
- }
-#endif
- }
- *q = NULL;
- return (&d->rpc);
-}
diff --git a/mdk-stage1/dietlibc/librpc/getrpcport.c b/mdk-stage1/dietlibc/librpc/getrpcport.c
deleted file mode 100644
index a7085cbe7..000000000
--- a/mdk-stage1/dietlibc/librpc/getrpcport.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/* @(#)getrpcport.c 2.1 88/07/29 4.0 RPCSRC */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)getrpcport.c 1.3 87/08/11 SMI";
-#endif
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * Copyright (c) 1985 by Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <netdb.h>
-#include <sys/socket.h>
-#include <string.h>
-#include <rpc/pmap_clnt.h>
-
-extern int getrpcport (const char * host, u_long prognum,
- u_long versnum, u_int proto)
-{
- struct sockaddr_in addr;
- struct hostent *hp;
-
- if ((hp = gethostbyname(host)) == NULL)
- return (0);
- bcopy(hp->h_addr, (char *) &addr.sin_addr, hp->h_length);
- addr.sin_family = AF_INET;
- addr.sin_port = 0;
- return (pmap_getport(&addr, prognum, versnum, proto));
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_clnt.c b/mdk-stage1/dietlibc/librpc/pmap_clnt.c
deleted file mode 100644
index 428675656..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_clnt.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* @(#)pmap_clnt.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)pmap_clnt.c 1.37 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_clnt.c
- * Client interface to pmap rpc service.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <unistd.h>
-
-static struct timeval timeout = { 5, 0 };
-static struct timeval tottimeout = { 60, 0 };
-
-void clnt_perror();
-
-
-/*
- * Set a mapping between program,version and port.
- * Calls the pmap service remotely to do the mapping.
- */
-bool_t pmap_set(program, version, protocol, port)
-u_long program;
-u_long version;
-int protocol;
-u_short port;
-{
- struct sockaddr_in myaddress;
- int socket = -1;
- register CLIENT *client;
- struct pmap parms;
- bool_t rslt;
-
- get_myaddress(&myaddress);
- client = clntudp_bufcreate(&myaddress, PMAPPROG, PMAPVERS,
- timeout, &socket, RPCSMALLMSGSIZE,
- RPCSMALLMSGSIZE);
- if (client == (CLIENT *) NULL)
- return (FALSE);
- parms.pm_prog = program;
- parms.pm_vers = version;
- parms.pm_prot = protocol;
- parms.pm_port = port;
- if (CLNT_CALL(client, PMAPPROC_SET, (xdrproc_t)xdr_pmap, (caddr_t)&parms, (xdrproc_t)xdr_bool, (caddr_t)&rslt,
- tottimeout) != RPC_SUCCESS) {
- clnt_perror(client, "Cannot register service");
- return (FALSE);
- }
- CLNT_DESTROY(client);
- (void) close(socket);
- return (rslt);
-}
-
-/*
- * Remove the mapping between program,version and port.
- * Calls the pmap service remotely to do the un-mapping.
- */
-bool_t pmap_unset(program, version)
-u_long program;
-u_long version;
-{
- struct sockaddr_in myaddress;
- int socket = -1;
- register CLIENT *client;
- struct pmap parms;
- bool_t rslt;
-
- get_myaddress(&myaddress);
- client = clntudp_bufcreate(&myaddress, PMAPPROG, PMAPVERS,
- timeout, &socket, RPCSMALLMSGSIZE,
- RPCSMALLMSGSIZE);
- if (client == (CLIENT *) NULL)
- return (FALSE);
- parms.pm_prog = program;
- parms.pm_vers = version;
- parms.pm_port = parms.pm_prot = 0;
- CLNT_CALL(client, PMAPPROC_UNSET, (xdrproc_t)xdr_pmap, (caddr_t)&parms, (xdrproc_t)xdr_bool, (caddr_t)&rslt,
- tottimeout);
- CLNT_DESTROY(client);
- (void) close(socket);
- return (rslt);
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_getmaps.c b/mdk-stage1/dietlibc/librpc/pmap_getmaps.c
deleted file mode 100644
index 6940783fb..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_getmaps.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* @(#)pmap_getmaps.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)pmap_getmaps.c 1.10 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_getmap.c
- * Client interface to pmap rpc service.
- * contains pmap_getmaps, which is only tcp service involved
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <sys/socket.h>
-#include <netdb.h>
-#include <stdio.h>
-#include <errno.h>
-//#include <net/if.h>
-#include <sys/ioctl.h>
-#define NAMELEN 255
-#define MAX_BROADCAST_SIZE 1400
-#include <unistd.h>
-
-extern int errno;
-
-/*
- * Get a copy of the current port maps.
- * Calls the pmap service remotely to do get the maps.
- */
-struct pmaplist *pmap_getmaps(address)
-struct sockaddr_in *address;
-{
- struct pmaplist *head = (struct pmaplist *) NULL;
- int socket = -1;
- struct timeval minutetimeout;
- register CLIENT *client;
-
- minutetimeout.tv_sec = 60;
- minutetimeout.tv_usec = 0;
- address->sin_port = htons(PMAPPORT);
- client = clnttcp_create(address, PMAPPROG, PMAPVERS, &socket, 50, 500);
- if (client != (CLIENT *) NULL) {
- if (CLNT_CALL(client, PMAPPROC_DUMP, (xdrproc_t)xdr_void, NULL, (xdrproc_t)xdr_pmaplist,
- (caddr_t)&head, minutetimeout) != RPC_SUCCESS) {
- clnt_perror(client, "pmap_getmaps rpc problem");
- }
- CLNT_DESTROY(client);
- }
- (void) close(socket);
- address->sin_port = 0;
- return (head);
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_getport.c b/mdk-stage1/dietlibc/librpc/pmap_getport.c
deleted file mode 100644
index 174dca41a..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_getport.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* @(#)pmap_getport.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)pmap_getport.c 1.9 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_getport.c
- * Client interface to pmap rpc service.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <sys/socket.h>
-//#include <net/if.h>
-#include <unistd.h>
-
-static struct timeval timeout = { 5, 0 };
-static struct timeval tottimeout = { 60, 0 };
-
-/*
- * Find the mapped port for program,version.
- * Calls the pmap service remotely to do the lookup.
- * Returns 0 if no map exists.
- */
-u_short pmap_getport(address, program, version, protocol)
-struct sockaddr_in *address;
-u_long program;
-u_long version;
-u_int protocol;
-{
- u_short port = 0;
- int socket = -1;
- register CLIENT *client;
- struct pmap parms;
-
- address->sin_port = htons(PMAPPORT);
- client = clntudp_bufcreate(address, PMAPPROG,
- PMAPVERS, timeout, &socket, RPCSMALLMSGSIZE,
- RPCSMALLMSGSIZE);
- if (client != (CLIENT *) NULL) {
- parms.pm_prog = program;
- parms.pm_vers = version;
- parms.pm_prot = protocol;
- parms.pm_port = 0; /* not needed or used */
- if (CLNT_CALL(client, PMAPPROC_GETPORT, (xdrproc_t)xdr_pmap, (caddr_t)&parms,
- (xdrproc_t)xdr_u_short, (caddr_t)&port, tottimeout) != RPC_SUCCESS) {
- rpc_createerr.cf_stat = RPC_PMAPFAILURE;
- clnt_geterr(client, &rpc_createerr.cf_error);
- } else if (port == 0) {
- rpc_createerr.cf_stat = RPC_PROGNOTREGISTERED;
- }
- CLNT_DESTROY(client);
- }
- (void) close(socket);
- address->sin_port = 0;
- return (port);
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_prot.c b/mdk-stage1/dietlibc/librpc/pmap_prot.c
deleted file mode 100644
index ec8b5af79..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_prot.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/* @(#)pmap_prot.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)pmap_prot.c 1.17 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_prot.c
- * Protocol for the local binder service, or pmap.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/pmap_prot.h>
-
-
-bool_t xdr_pmap(xdrs, regs)
-XDR *xdrs;
-struct pmap *regs;
-{
-
- if (xdr_u_long(xdrs, &regs->pm_prog) &&
- xdr_u_long(xdrs, &regs->pm_vers) &&
- xdr_u_long(xdrs, &regs->pm_prot))
- return (xdr_u_long(xdrs, &regs->pm_port));
- return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_prot2.c b/mdk-stage1/dietlibc/librpc/pmap_prot2.c
deleted file mode 100644
index 870c844ed..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_prot2.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* @(#)pmap_prot2.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)pmap_prot2.c 1.3 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_prot2.c
- * Protocol for the local binder service, or pmap.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <rpc/pmap_prot.h>
-
-
-/*
- * What is going on with linked lists? (!)
- * First recall the link list declaration from pmap_prot.h:
- *
- * struct pmaplist {
- * struct pmap pml_map;
- * struct pmaplist *pml_map;
- * };
- *
- * Compare that declaration with a corresponding xdr declaration that
- * is (a) pointer-less, and (b) recursive:
- *
- * typedef union switch (bool_t) {
- *
- * case TRUE: struct {
- * struct pmap;
- * pmaplist_t foo;
- * };
- *
- * case FALSE: struct {};
- * } pmaplist_t;
- *
- * Notice that the xdr declaration has no nxt pointer while
- * the C declaration has no bool_t variable. The bool_t can be
- * interpreted as ``more data follows me''; if FALSE then nothing
- * follows this bool_t; if TRUE then the bool_t is followed by
- * an actual struct pmap, and then (recursively) by the
- * xdr union, pamplist_t.
- *
- * This could be implemented via the xdr_union primitive, though this
- * would cause a one recursive call per element in the list. Rather than do
- * that we can ``unwind'' the recursion
- * into a while loop and do the union arms in-place.
- *
- * The head of the list is what the C programmer wishes to past around
- * the net, yet is the data that the pointer points to which is interesting;
- * this sounds like a job for xdr_reference!
- */
-bool_t xdr_pmaplist(XDR* xdrs, struct pmaplist** rp)
-{
- /*
- * more_elements is pre-computed in case the direction is
- * XDR_ENCODE or XDR_FREE. more_elements is overwritten by
- * xdr_bool when the direction is XDR_DECODE.
- */
- bool_t more_elements;
- register int freeing = (xdrs->x_op == XDR_FREE);
- register struct pmaplist **next=0;
-
- while (TRUE) {
- more_elements = (bool_t) (*rp != NULL);
- if (!xdr_bool(xdrs, &more_elements))
- return (FALSE);
- if (!more_elements)
- return (TRUE); /* we are done */
- /*
- * the unfortunate side effect of non-recursion is that in
- * the case of freeing we must remember the next object
- * before we free the current object ...
- */
- if (freeing)
- next = &((*rp)->pml_next);
- if (!xdr_reference(xdrs, (caddr_t *) rp,
- (u_int) sizeof(struct pmaplist), (xdrproc_t)xdr_pmap))
- return (FALSE);
-
- rp = (freeing) ? next : &((*rp)->pml_next);
- }
-}
diff --git a/mdk-stage1/dietlibc/librpc/pmap_rmt.c b/mdk-stage1/dietlibc/librpc/pmap_rmt.c
deleted file mode 100644
index 02efcf91c..000000000
--- a/mdk-stage1/dietlibc/librpc/pmap_rmt.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/* @(#)pmap_rmt.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)pmap_rmt.c 1.21 87/08/27 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * pmap_rmt.c
- * Client interface to pmap rpc service.
- * remote call and broadcast service
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <rpc/pmap_rmt.h>
-#include <sys/socket.h>
-#include <stdio.h>
-#include <errno.h>
-//#include <net/if.h>
-#include <sys/ioctl.h>
-#include <arpa/inet.h>
-#define MAX_BROADCAST_SIZE 1400
-#include <unistd.h>
-#include <string.h>
-
-extern int errno;
-static struct timeval timeout = { 3, 0 };
-
-
-/*
- * pmapper remote-call-service interface.
- * This routine is used to call the pmapper remote call service
- * which will look up a service program in the port maps, and then
- * remotely call that routine with the given parameters. This allows
- * programs to do a lookup and call in one step.
-*/
-enum clnt_stat
-pmap_rmtcall(addr, prog, vers, proc, xdrargs, argsp, xdrres, resp, tout,
- port_ptr)
-struct sockaddr_in *addr;
-u_long prog, vers, proc;
-xdrproc_t xdrargs, xdrres;
-caddr_t argsp, resp;
-struct timeval tout;
-u_long *port_ptr;
-{
- int socket = -1;
- register CLIENT *client;
- struct rmtcallargs a;
- struct rmtcallres r;
- enum clnt_stat stat;
-
- addr->sin_port = htons(PMAPPORT);
- client = clntudp_create(addr, PMAPPROG, PMAPVERS, timeout, &socket);
- if (client != (CLIENT *) NULL) {
- a.prog = prog;
- a.vers = vers;
- a.proc = proc;
- a.args_ptr = argsp;
- a.xdr_args = xdrargs;
- r.port_ptr = port_ptr;
- r.results_ptr = resp;
- r.xdr_results = xdrres;
- stat = CLNT_CALL(client, PMAPPROC_CALLIT, (xdrproc_t)xdr_rmtcall_args, (caddr_t)&a,
- (xdrproc_t)xdr_rmtcallres, (caddr_t)&r, tout);
- CLNT_DESTROY(client);
- } else {
- stat = RPC_FAILED;
- }
- (void) close(socket);
- addr->sin_port = 0;
- return (stat);
-}
-
-
-/*
- * XDR remote call arguments
- * written for XDR_ENCODE direction only
- */
-bool_t xdr_rmtcall_args(XDR* xdrs, struct rmtcallargs* cap)
-{
- u_int lenposition, argposition, position;
-
- if (xdr_u_long(xdrs, &(cap->prog)) &&
- xdr_u_long(xdrs, &(cap->vers)) && xdr_u_long(xdrs, &(cap->proc))) {
- lenposition = XDR_GETPOS(xdrs);
- if (!xdr_u_long(xdrs, &(cap->arglen)))
- return (FALSE);
- argposition = XDR_GETPOS(xdrs);
- if (!(*(cap->xdr_args)) (xdrs, cap->args_ptr))
- return (FALSE);
- position = XDR_GETPOS(xdrs);
- cap->arglen = (u_long) position - (u_long) argposition;
- XDR_SETPOS(xdrs, lenposition);
- if (!xdr_u_long(xdrs, &(cap->arglen)))
- return (FALSE);
- XDR_SETPOS(xdrs, position);
- return (TRUE);
- }
- return (FALSE);
-}
-
-/*
- * XDR remote call results
- * written for XDR_DECODE direction only
- */
-bool_t xdr_rmtcallres(XDR* xdrs, struct rmtcallres* crp)
-{
- caddr_t port_ptr;
-
- port_ptr = (caddr_t) crp->port_ptr;
- if (xdr_reference(xdrs, &port_ptr, sizeof(u_long),
- (xdrproc_t)xdr_u_long) && xdr_u_long(xdrs, &crp->resultslen)) {
- crp->port_ptr = (u_long *) port_ptr;
- return ((*(crp->xdr_results)) (xdrs, crp->results_ptr));
- }
- return (FALSE);
-}
-
-
-/*
- * The following is kludged-up support for simple rpc broadcasts.
- * Someday a large, complicated system will replace these trivial
- * routines which only support udp/ip .
- */
-
-static int getbroadcastnets(addrs, sock, buf)
-struct in_addr *addrs;
-int sock; /* any valid socket will do */
-char *buf; /* why allocxate more when we can use existing... */
-{
-#ifdef __linux__
- struct sockaddr_in addr;
-
- get_myaddress(&addr);
-#if 1
- printf("%s(%d): no inet_makeaddr()\n", __FILE__, __LINE__);
-#else
- addrs[0] = inet_makeaddr(inet_netof(addr.sin_addr), INADDR_ANY);
-#endif
- return 1;
-#else
- struct ifconf ifc;
- struct ifreq ifreq, *ifr;
- struct sockaddr_in *sin;
- int n, i;
-
- ifc.ifc_len = UDPMSGSIZE;
- ifc.ifc_buf = buf;
- if (ioctl(sock, SIOCGIFCONF, (char *) &ifc) < 0) {
- perror("broadcast: ioctl (get interface configuration)");
- return (0);
- }
- ifr = ifc.ifc_req;
- for (i = 0, n = ifc.ifc_len / sizeof(struct ifreq); n > 0; n--, ifr++) {
- ifreq = *ifr;
- if (ioctl(sock, SIOCGIFFLAGS, (char *) &ifreq) < 0) {
- perror("broadcast: ioctl (get interface flags)");
- continue;
- }
- if ((ifreq.ifr_flags & IFF_BROADCAST) &&
- (ifreq.ifr_flags & IFF_UP) &&
- ifr->ifr_addr.sa_family == AF_INET) {
- sin = (struct sockaddr_in *) &ifr->ifr_addr;
-#ifdef SIOCGIFBRDADDR /* 4.3BSD */
- if (ioctl(sock, SIOCGIFBRDADDR, (char *) &ifreq) < 0) {
-#if 1
- printf("%s(%d): no inet_makeaddr()\n", __FILE__, __LINE__);
-#else
- addrs[i++] = inet_makeaddr(inet_netof
- (sin->sin_addr.s_addr),
- INADDR_ANY);
-#endif
- } else {
- addrs[i++] = ((struct sockaddr_in *)
- &ifreq.ifr_addr)->sin_addr;
- }
-#else /* 4.2 BSD */
-#if 1
- printf("%s(%d): no inet_makeaddr()\n", __FILE__, __LINE__);
-#else
- addrs[i++] = inet_makeaddr(inet_netof
- (sin->sin_addr.s_addr), INADDR_ANY);
-#endif
-#endif
- }
- }
- return (i);
-#endif
-}
-
-enum clnt_stat
-clnt_broadcast(prog, vers, proc, xargs, argsp, xresults, resultsp,
- eachresult)
-u_long prog; /* program number */
-u_long vers; /* version number */
-u_long proc; /* procedure number */
-xdrproc_t xargs; /* xdr routine for args */
-caddr_t argsp; /* pointer to args */
-xdrproc_t xresults; /* xdr routine for results */
-caddr_t resultsp; /* pointer to results */
-resultproc_t eachresult; /* call with each result obtained */
-{
- enum clnt_stat stat;
- AUTH *unix_auth = authunix_create_default();
- XDR xdr_stream;
- register XDR *xdrs = &xdr_stream;
- int outlen, inlen, fromlen, nets;
- register int sock;
- int on = 1;
-
-#ifdef FD_SETSIZE
- fd_set mask;
- fd_set readfds;
-#else
- int readfds;
- register int mask;
-#endif /* def FD_SETSIZE */
- register int i;
- bool_t done = FALSE;
- register u_long xid;
- u_long port;
- struct in_addr addrs[20];
- struct sockaddr_in baddr, raddr; /* broadcast and response addresses */
- struct rmtcallargs a;
- struct rmtcallres r;
- struct rpc_msg msg;
- struct timeval t;
- char outbuf[MAX_BROADCAST_SIZE], inbuf[UDPMSGSIZE];
-
- /*
- * initialization: create a socket, a broadcast address, and
- * preserialize the arguments into a send buffer.
- */
- if ((sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP)) < 0) {
- perror("Cannot create socket for broadcast rpc");
- stat = RPC_CANTSEND;
- goto done_broad;
- }
-#ifdef SO_BROADCAST
- if (setsockopt(sock, SOL_SOCKET, SO_BROADCAST, &on, sizeof(on)) < 0) {
- perror("Cannot set socket option SO_BROADCAST");
- stat = RPC_CANTSEND;
- goto done_broad;
- }
-#endif /* def SO_BROADCAST */
-#ifdef FD_SETSIZE
- FD_ZERO(&mask);
- FD_SET(sock, &mask);
-#else
- mask = (1 << sock);
-#endif /* def FD_SETSIZE */
- nets = getbroadcastnets(addrs, sock, inbuf);
- bzero((char *) &baddr, sizeof(baddr));
- baddr.sin_family = AF_INET;
- baddr.sin_port = htons(PMAPPORT);
- baddr.sin_addr.s_addr = htonl(INADDR_ANY);
-/* baddr.sin_addr.S_un.S_addr = htonl(INADDR_ANY); */
- (void) gettimeofday(&t, (struct timezone *) 0);
- msg.rm_xid = xid = getpid() ^ t.tv_sec ^ t.tv_usec;
- t.tv_usec = 0;
- msg.rm_direction = CALL;
- msg.rm_call.cb_rpcvers = RPC_MSG_VERSION;
- msg.rm_call.cb_prog = PMAPPROG;
- msg.rm_call.cb_vers = PMAPVERS;
- msg.rm_call.cb_proc = PMAPPROC_CALLIT;
- msg.rm_call.cb_cred = unix_auth->ah_cred;
- msg.rm_call.cb_verf = unix_auth->ah_verf;
- a.prog = prog;
- a.vers = vers;
- a.proc = proc;
- a.xdr_args = xargs;
- a.args_ptr = argsp;
- r.port_ptr = &port;
- r.xdr_results = xresults;
- r.results_ptr = resultsp;
- xdrmem_create(xdrs, outbuf, MAX_BROADCAST_SIZE, XDR_ENCODE);
- if ((!xdr_callmsg(xdrs, &msg)) || (!xdr_rmtcall_args(xdrs, &a))) {
- stat = RPC_CANTENCODEARGS;
- goto done_broad;
- }
- outlen = (int) xdr_getpos(xdrs);
- xdr_destroy(xdrs);
- /*
- * Basic loop: broadcast a packet and wait a while for response(s).
- * The response timeout grows larger per iteration.
- */
- for (t.tv_sec = 4; t.tv_sec <= 14; t.tv_sec += 2) {
- for (i = 0; i < nets; i++) {
- baddr.sin_addr = addrs[i];
- if (sendto(sock, outbuf, outlen, 0,
- (struct sockaddr *) &baddr,
- sizeof(struct sockaddr)) != outlen) {
- perror("Cannot send broadcast packet");
- stat = RPC_CANTSEND;
- goto done_broad;
- }
- }
- if (eachresult == NULL) {
- stat = RPC_SUCCESS;
- goto done_broad;
- }
- recv_again:
- msg.acpted_rply.ar_verf = _null_auth;
- msg.acpted_rply.ar_results.where = (caddr_t) & r;
- msg.acpted_rply.ar_results.proc = (xdrproc_t)xdr_rmtcallres;
- readfds = mask;
- switch (select(_rpc_dtablesize(), &readfds, 0, 0, &t)) {
-
- case 0: /* timed out */
- stat = RPC_TIMEDOUT;
- continue;
-
- case -1: /* some kind of error */
- if (errno == EINTR)
- goto recv_again;
- perror("Broadcast select problem");
- stat = RPC_CANTRECV;
- goto done_broad;
-
- } /* end of select results switch */
- try_again:
- fromlen = sizeof(struct sockaddr);
-
- inlen = recvfrom(sock, inbuf, UDPMSGSIZE, 0,
- (struct sockaddr *) &raddr, &fromlen);
- if (inlen < 0) {
- if (errno == EINTR)
- goto try_again;
- perror("Cannot receive reply to broadcast");
- stat = RPC_CANTRECV;
- goto done_broad;
- }
- if (inlen < sizeof(u_long))
- goto recv_again;
- /*
- * see if reply transaction id matches sent id.
- * If so, decode the results.
- */
- xdrmem_create(xdrs, inbuf, (u_int) inlen, XDR_DECODE);
- if (xdr_replymsg(xdrs, &msg)) {
- if ((msg.rm_xid == xid) &&
- (msg.rm_reply.rp_stat == MSG_ACCEPTED) &&
- (msg.acpted_rply.ar_stat == SUCCESS)) {
- raddr.sin_port = htons((u_short) port);
- done = (*eachresult) (resultsp, &raddr);
- }
- /* otherwise, we just ignore the errors ... */
- } else {
-#ifdef notdef
- /* some kind of deserialization problem ... */
- if (msg.rm_xid == xid)
- fprintf(stderr, "Broadcast deserialization problem");
- /* otherwise, just random garbage */
-#endif
- }
- xdrs->x_op = XDR_FREE;
- msg.acpted_rply.ar_results.proc = (xdrproc_t)xdr_void;
- (void) xdr_replymsg(xdrs, &msg);
- (void) (*xresults) (xdrs, resultsp);
- xdr_destroy(xdrs);
- if (done) {
- stat = RPC_SUCCESS;
- goto done_broad;
- } else {
- goto recv_again;
- }
- }
- done_broad:
- (void) close(sock);
- AUTH_DESTROY(unix_auth);
- return (stat);
-}
diff --git a/mdk-stage1/dietlibc/librpc/rpc_callmsg.c b/mdk-stage1/dietlibc/librpc/rpc_callmsg.c
deleted file mode 100644
index 4b3a9880e..000000000
--- a/mdk-stage1/dietlibc/librpc/rpc_callmsg.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/* @(#)rpc_callmsg.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)rpc_callmsg.c 1.4 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * rpc_callmsg.c
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- */
-
-#include <sys/param.h>
-
-#include <rpc/rpc.h>
-#include <string.h>
-
-/*
- * XDR a call message
- */
-bool_t xdr_callmsg(xdrs, cmsg)
-register XDR *xdrs;
-register struct rpc_msg *cmsg;
-{
- register int32_t *buf;
- register struct opaque_auth *oa;
-
- if (xdrs->x_op == XDR_ENCODE) {
- if (cmsg->rm_call.cb_cred.oa_length > MAX_AUTH_BYTES) {
- return (FALSE);
- }
- if (cmsg->rm_call.cb_verf.oa_length > MAX_AUTH_BYTES) {
- return (FALSE);
- }
- buf = XDR_INLINE(xdrs, 8 * BYTES_PER_XDR_UNIT
- + RNDUP(cmsg->rm_call.cb_cred.oa_length)
- + 2 * BYTES_PER_XDR_UNIT
- + RNDUP(cmsg->rm_call.cb_verf.oa_length));
- if (buf != NULL) {
- IXDR_PUT_LONG(buf, cmsg->rm_xid);
- IXDR_PUT_ENUM(buf, cmsg->rm_direction);
- if (cmsg->rm_direction != CALL) {
- return (FALSE);
- }
- IXDR_PUT_LONG(buf, cmsg->rm_call.cb_rpcvers);
- if (cmsg->rm_call.cb_rpcvers != RPC_MSG_VERSION) {
- return (FALSE);
- }
- IXDR_PUT_LONG(buf, cmsg->rm_call.cb_prog);
- IXDR_PUT_LONG(buf, cmsg->rm_call.cb_vers);
- IXDR_PUT_LONG(buf, cmsg->rm_call.cb_proc);
- oa = &cmsg->rm_call.cb_cred;
- IXDR_PUT_ENUM(buf, oa->oa_flavor);
- IXDR_PUT_LONG(buf, oa->oa_length);
- if (oa->oa_length) {
- bcopy(oa->oa_base, (caddr_t) buf, oa->oa_length);
- buf += RNDUP(oa->oa_length) / sizeof(long);
- }
- oa = &cmsg->rm_call.cb_verf;
- IXDR_PUT_ENUM(buf, oa->oa_flavor);
- IXDR_PUT_LONG(buf, oa->oa_length);
- if (oa->oa_length) {
- bcopy(oa->oa_base, (caddr_t) buf, oa->oa_length);
- /* no real need....
- buf += RNDUP(oa->oa_length) / sizeof (long);
- */
- }
- return (TRUE);
- }
- }
- if (xdrs->x_op == XDR_DECODE) {
- buf = XDR_INLINE(xdrs, 8 * BYTES_PER_XDR_UNIT);
- if (buf != NULL) {
- cmsg->rm_xid = IXDR_GET_LONG(buf);
- cmsg->rm_direction = IXDR_GET_ENUM(buf, enum msg_type);
-
- if (cmsg->rm_direction != CALL) {
- return (FALSE);
- }
- cmsg->rm_call.cb_rpcvers = IXDR_GET_LONG(buf);
- if (cmsg->rm_call.cb_rpcvers != RPC_MSG_VERSION) {
- return (FALSE);
- }
- cmsg->rm_call.cb_prog = IXDR_GET_LONG(buf);
- cmsg->rm_call.cb_vers = IXDR_GET_LONG(buf);
- cmsg->rm_call.cb_proc = IXDR_GET_LONG(buf);
- oa = &cmsg->rm_call.cb_cred;
- oa->oa_flavor = IXDR_GET_ENUM(buf, enum_t);
- oa->oa_length = IXDR_GET_LONG(buf);
- if (oa->oa_length) {
- if (oa->oa_length > MAX_AUTH_BYTES) {
- return (FALSE);
- }
- if (oa->oa_base == NULL) {
- oa->oa_base = (caddr_t)
- mem_alloc(oa->oa_length);
- }
- buf = XDR_INLINE(xdrs, RNDUP(oa->oa_length));
- if (buf == NULL) {
- if (xdr_opaque(xdrs, oa->oa_base,
- oa->oa_length) == FALSE) {
- return (FALSE);
- }
- } else {
- bcopy((caddr_t) buf, oa->oa_base, oa->oa_length);
- /* no real need....
- buf += RNDUP(oa->oa_length) /
- sizeof (long);
- */
- }
- }
- oa = &cmsg->rm_call.cb_verf;
- buf = XDR_INLINE(xdrs, 2 * BYTES_PER_XDR_UNIT);
- if (buf == NULL) {
- if (xdr_enum(xdrs, &oa->oa_flavor) == FALSE ||
- xdr_u_int(xdrs, &oa->oa_length) == FALSE) {
- return (FALSE);
- }
- } else {
- oa->oa_flavor = IXDR_GET_ENUM(buf, enum_t);
- oa->oa_length = IXDR_GET_LONG(buf);
- }
- if (oa->oa_length) {
- if (oa->oa_length > MAX_AUTH_BYTES) {
- return (FALSE);
- }
- if (oa->oa_base == NULL) {
- oa->oa_base = (caddr_t)
- mem_alloc(oa->oa_length);
- }
- buf = XDR_INLINE(xdrs, RNDUP(oa->oa_length));
- if (buf == NULL) {
- if (xdr_opaque(xdrs, oa->oa_base,
- oa->oa_length) == FALSE) {
- return (FALSE);
- }
- } else {
- bcopy((caddr_t) buf, oa->oa_base, oa->oa_length);
- /* no real need...
- buf += RNDUP(oa->oa_length) /
- sizeof (long);
- */
- }
- }
- return (TRUE);
- }
- }
- if (xdr_u_long(xdrs, &(cmsg->rm_xid)) &&
- xdr_enum(xdrs, (enum_t *) & (cmsg->rm_direction)) &&
- (cmsg->rm_direction == CALL) &&
- xdr_u_long(xdrs, &(cmsg->rm_call.cb_rpcvers)) &&
- (cmsg->rm_call.cb_rpcvers == RPC_MSG_VERSION) &&
- xdr_u_long(xdrs, &(cmsg->rm_call.cb_prog)) &&
- xdr_u_long(xdrs, &(cmsg->rm_call.cb_vers)) &&
- xdr_u_long(xdrs, &(cmsg->rm_call.cb_proc)) &&
- xdr_opaque_auth(xdrs, &(cmsg->rm_call.cb_cred)))
- return (xdr_opaque_auth(xdrs, &(cmsg->rm_call.cb_verf)));
- return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/rpc_commondata.c b/mdk-stage1/dietlibc/librpc/rpc_commondata.c
deleted file mode 100644
index 39648d284..000000000
--- a/mdk-stage1/dietlibc/librpc/rpc_commondata.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* @(#)rpc_commondata.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#include <rpc/rpc.h>
-/*
- * This file should only contain common data (global data) that is exported
- * by public interfaces
- */
-struct opaque_auth _null_auth;
-
-#ifdef FD_SETSIZE
-fd_set svc_fdset;
-#else
-int svc_fds;
-#endif /* def FD_SETSIZE */
-struct rpc_createerr rpc_createerr;
diff --git a/mdk-stage1/dietlibc/librpc/rpc_dtablesize.c b/mdk-stage1/dietlibc/librpc/rpc_dtablesize.c
deleted file mode 100644
index b08ebaccd..000000000
--- a/mdk-stage1/dietlibc/librpc/rpc_dtablesize.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/* @(#)rpc_dtablesize.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)rpc_dtablesize.c 1.2 87/08/11 Copyr 1987 Sun Micro";
-#endif
-
-#include <unistd.h>
-
-/*
- * Cache the result of getdtablesize(), so we don't have to do an
- * expensive system call every time.
- */
-int _rpc_dtablesize()
-{
- static int size;
-
- if (size == 0) {
- size = getdtablesize();
- }
- return (size);
-}
diff --git a/mdk-stage1/dietlibc/librpc/rpc_prot.c b/mdk-stage1/dietlibc/librpc/rpc_prot.c
deleted file mode 100644
index 19a4db27f..000000000
--- a/mdk-stage1/dietlibc/librpc/rpc_prot.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* @(#)rpc_prot.c 2.3 88/08/07 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)rpc_prot.c 1.36 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * rpc_prot.c
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * This set of routines implements the rpc message definition,
- * its serializer and some common rpc utility routines.
- * The routines are meant for various implementations of rpc -
- * they are NOT for the rpc client or rpc service implementations!
- * Because authentication stuff is easy and is part of rpc, the opaque
- * routines are also in this program.
- */
-
-#include <sys/param.h>
-
-#include <rpc/rpc.h>
-
-/* * * * * * * * * * * * * * XDR Authentication * * * * * * * * * * * */
-
-struct opaque_auth _null_auth;
-
-/*
- * XDR an opaque authentication struct
- * (see auth.h)
- */
-bool_t xdr_opaque_auth(xdrs, ap)
-register XDR *xdrs;
-register struct opaque_auth *ap;
-{
-
- if (xdr_enum(xdrs, &(ap->oa_flavor)))
- return (xdr_bytes(xdrs, &ap->oa_base,
- &ap->oa_length, MAX_AUTH_BYTES));
- return (FALSE);
-}
-
-/*
- * XDR a DES block
- */
-bool_t xdr_des_block(xdrs, blkp)
-register XDR *xdrs;
-register des_block *blkp;
-{
- return (xdr_opaque(xdrs, (caddr_t) blkp, sizeof(des_block)));
-}
-
-/* * * * * * * * * * * * * * XDR RPC MESSAGE * * * * * * * * * * * * * * * */
-
-/*
- * XDR the MSG_ACCEPTED part of a reply message union
- */
-bool_t xdr_accepted_reply(xdrs, ar)
-register XDR *xdrs;
-register struct accepted_reply *ar;
-{
-
- /* personalized union, rather than calling xdr_union */
- if (!xdr_opaque_auth(xdrs, &(ar->ar_verf)))
- return (FALSE);
- if (!xdr_enum(xdrs, (enum_t *) & (ar->ar_stat)))
- return (FALSE);
- switch (ar->ar_stat) {
-
- case SUCCESS:
- return ((*(ar->ar_results.proc)) (xdrs, ar->ar_results.where));
-
- case PROG_MISMATCH:
- if (!xdr_u_long(xdrs, &(ar->ar_vers.low)))
- return (FALSE);
- return (xdr_u_long(xdrs, &(ar->ar_vers.high)));
- }
- return (TRUE); /* TRUE => open ended set of problems */
-}
-
-/*
- * XDR the MSG_DENIED part of a reply message union
- */
-bool_t xdr_rejected_reply(xdrs, rr)
-register XDR *xdrs;
-register struct rejected_reply *rr;
-{
-
- /* personalized union, rather than calling xdr_union */
- if (!xdr_enum(xdrs, (enum_t *) & (rr->rj_stat)))
- return (FALSE);
- switch (rr->rj_stat) {
-
- case RPC_MISMATCH:
- if (!xdr_u_long(xdrs, &(rr->rj_vers.low)))
- return (FALSE);
- return (xdr_u_long(xdrs, &(rr->rj_vers.high)));
-
- case AUTH_ERROR:
- return (xdr_enum(xdrs, (enum_t *) & (rr->rj_why)));
- }
- return (FALSE);
-}
-
-static struct xdr_discrim reply_dscrm[3] = {
- {(int) MSG_ACCEPTED, (xdrproc_t)xdr_accepted_reply},
- {(int) MSG_DENIED, (xdrproc_t)xdr_rejected_reply},
- {__dontcare__, NULL_xdrproc_t}
-};
-
-/*
- * XDR a reply message
- */
-bool_t xdr_replymsg(xdrs, rmsg)
-register XDR *xdrs;
-register struct rpc_msg *rmsg;
-{
- if (xdr_u_long(xdrs, &(rmsg->rm_xid)) &&
- xdr_enum(xdrs, (enum_t *) & (rmsg->rm_direction)) &&
- (rmsg->rm_direction == REPLY))
- return (xdr_union(xdrs, (enum_t *) & (rmsg->rm_reply.rp_stat),
- (caddr_t) & (rmsg->rm_reply.ru), reply_dscrm,
- NULL_xdrproc_t));
- return (FALSE);
-}
-
-
-/*
- * Serializes the "static part" of a call message header.
- * The fields include: rm_xid, rm_direction, rpcvers, prog, and vers.
- * The rm_xid is not really static, but the user can easily munge on the fly.
- */
-bool_t xdr_callhdr(xdrs, cmsg)
-register XDR *xdrs;
-register struct rpc_msg *cmsg;
-{
-
- cmsg->rm_direction = CALL;
- cmsg->rm_call.cb_rpcvers = RPC_MSG_VERSION;
- if (
- (xdrs->x_op == XDR_ENCODE) &&
- xdr_u_long(xdrs, &(cmsg->rm_xid)) &&
- xdr_enum(xdrs, (enum_t *) & (cmsg->rm_direction)) &&
- xdr_u_long(xdrs, &(cmsg->rm_call.cb_rpcvers)) &&
- xdr_u_long(xdrs, &(cmsg->rm_call.cb_prog)))
- return (xdr_u_long(xdrs, &(cmsg->rm_call.cb_vers)));
- return (FALSE);
-}
-
-/* ************************** Client utility routine ************* */
-
-static void accepted(acpt_stat, error)
-register enum accept_stat acpt_stat;
-register struct rpc_err *error;
-{
-
- switch (acpt_stat) {
-
- case PROG_UNAVAIL:
- error->re_status = RPC_PROGUNAVAIL;
- return;
-
- case PROG_MISMATCH:
- error->re_status = RPC_PROGVERSMISMATCH;
- return;
-
- case PROC_UNAVAIL:
- error->re_status = RPC_PROCUNAVAIL;
- return;
-
- case GARBAGE_ARGS:
- error->re_status = RPC_CANTDECODEARGS;
- return;
-
- case SYSTEM_ERR:
- error->re_status = RPC_SYSTEMERROR;
- return;
-
- case SUCCESS:
- error->re_status = RPC_SUCCESS;
- return;
- }
- /* something's wrong, but we don't know what ... */
- error->re_status = RPC_FAILED;
- error->re_lb.s1 = (long) MSG_ACCEPTED;
- error->re_lb.s2 = (long) acpt_stat;
-}
-
-static void rejected(rjct_stat, error)
-register enum reject_stat rjct_stat;
-register struct rpc_err *error;
-{
-
- switch (rjct_stat) {
-
- case RPC_VERSMISMATCH:
- error->re_status = RPC_VERSMISMATCH;
- return;
-
- case AUTH_ERROR:
- error->re_status = RPC_AUTHERROR;
- return;
- }
- /* something's wrong, but we don't know what ... */
- error->re_status = RPC_FAILED;
- error->re_lb.s1 = (long) MSG_DENIED;
- error->re_lb.s2 = (long) rjct_stat;
-}
-
-/*
- * given a reply message, fills in the error
- */
-void _seterr_reply(msg, error)
-register struct rpc_msg *msg;
-register struct rpc_err *error;
-{
-
- /* optimized for normal, SUCCESSful case */
- switch (msg->rm_reply.rp_stat) {
-
- case MSG_ACCEPTED:
- if (msg->acpted_rply.ar_stat == SUCCESS) {
- error->re_status = RPC_SUCCESS;
- return;
- };
- accepted(msg->acpted_rply.ar_stat, error);
- break;
-
- case MSG_DENIED:
- rejected(msg->rjcted_rply.rj_stat, error);
- break;
-
- default:
- error->re_status = RPC_FAILED;
- error->re_lb.s1 = (long) (msg->rm_reply.rp_stat);
- break;
- }
- switch (error->re_status) {
-
- case RPC_VERSMISMATCH:
- error->re_vers.low = msg->rjcted_rply.rj_vers.low;
- error->re_vers.high = msg->rjcted_rply.rj_vers.high;
- break;
-
- case RPC_AUTHERROR:
- error->re_why = msg->rjcted_rply.rj_why;
- break;
-
- case RPC_PROGVERSMISMATCH:
- error->re_vers.low = msg->acpted_rply.ar_vers.low;
- error->re_vers.high = msg->acpted_rply.ar_vers.high;
- break;
- }
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc.c b/mdk-stage1/dietlibc/librpc/svc.c
deleted file mode 100644
index 4fcdb5216..000000000
--- a/mdk-stage1/dietlibc/librpc/svc.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/* @(#)svc.c 2.4 88/08/11 4.0 RPCSRC; from 1.44 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc.c 1.41 87/10/13 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc.c, Server-side remote procedure call interface.
- *
- * There are two sets of procedures here. The xprt routines are
- * for handling transport handles. The svc routines handle the
- * list of service routines.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <errno.h>
-#include <rpc/rpc.h>
-#include <rpc/pmap_clnt.h>
-#ifdef __linux__
-#include <sys/types.h>
-#endif
-
-extern int errno;
-
-#ifdef FD_SETSIZE
-static SVCXPRT **xports;
-#else
-#define NOFILE 32
-
-static SVCXPRT *xports[NOFILE];
-#endif /* def FD_SETSIZE */
-
-#define NULL_SVC ((struct svc_callout *)0)
-#define RQCRED_SIZE 400 /* this size is excessive */
-
-/*
- * The services list
- * Each entry represents a set of procedures (an rpc program).
- * The dispatch routine takes request structs and runs the
- * apropriate procedure.
- */
-static struct svc_callout {
- struct svc_callout *sc_next;
- u_long sc_prog;
- u_long sc_vers;
- void (*sc_dispatch) ();
-} *svc_head;
-
-static struct svc_callout *svc_find();
-
-/* *************** SVCXPRT related stuff **************** */
-
-/*
- * Activate a transport handle.
- */
-void xprt_register(xprt)
-SVCXPRT *xprt;
-{
- register int sock = xprt->xp_sock;
-
-#ifdef FD_SETSIZE
- if (xports == NULL) {
- xports = (SVCXPRT **)
- mem_alloc(FD_SETSIZE * sizeof(SVCXPRT *));
- }
- if (sock < _rpc_dtablesize()) {
- xports[sock] = xprt;
- FD_SET(sock, &svc_fdset);
- }
-#else
- if (sock < NOFILE) {
- xports[sock] = xprt;
- svc_fds |= (1 << sock);
- }
-#endif /* def FD_SETSIZE */
-
-}
-
-/*
- * De-activate a transport handle.
- */
-void xprt_unregister(xprt)
-SVCXPRT *xprt;
-{
- register int sock = xprt->xp_sock;
-
-#ifdef FD_SETSIZE
- if ((sock < _rpc_dtablesize()) && (xports[sock] == xprt)) {
- xports[sock] = (SVCXPRT *) 0;
- FD_CLR(sock, &svc_fdset);
- }
-#else
- if ((sock < NOFILE) && (xports[sock] == xprt)) {
- xports[sock] = (SVCXPRT *) 0;
- svc_fds &= ~(1 << sock);
- }
-#endif /* def FD_SETSIZE */
-}
-
-
-/* ********************** CALLOUT list related stuff ************* */
-
-/*
- * Add a service program to the callout list.
- * The dispatch routine will be called when a rpc request for this
- * program number comes in.
- */
-bool_t svc_register(xprt, prog, vers, dispatch, protocol)
-SVCXPRT *xprt;
-u_long prog;
-u_long vers;
-void (*dispatch) ();
-rpcprot_t protocol;
-{
- struct svc_callout *prev;
- register struct svc_callout *s;
-
- if ((s = svc_find(prog, vers, &prev)) != NULL_SVC) {
- if (s->sc_dispatch == dispatch)
- goto pmap_it; /* he is registering another xptr */
- return (FALSE);
- }
- s = (struct svc_callout *) mem_alloc(sizeof(struct svc_callout));
-
- if (s == (struct svc_callout *) 0) {
- return (FALSE);
- }
- s->sc_prog = prog;
- s->sc_vers = vers;
- s->sc_dispatch = dispatch;
- s->sc_next = svc_head;
- svc_head = s;
- pmap_it:
- /* now register the information with the local binder service */
- if (protocol) {
- return (pmap_set(prog, vers, protocol, xprt->xp_port));
- }
- return (TRUE);
-}
-
-/*
- * Remove a service program from the callout list.
- */
-void svc_unregister(prog, vers)
-u_long prog;
-u_long vers;
-{
- struct svc_callout *prev;
- register struct svc_callout *s;
-
- if ((s = svc_find(prog, vers, &prev)) == NULL_SVC)
- return;
- if (prev == NULL_SVC) {
- svc_head = s->sc_next;
- } else {
- prev->sc_next = s->sc_next;
- }
- s->sc_next = NULL_SVC;
- mem_free((char *) s, (u_int) sizeof(struct svc_callout));
-
- /* now unregister the information with the local binder service */
- (void) pmap_unset(prog, vers);
-}
-
-/*
- * Search the callout list for a program number, return the callout
- * struct.
- */
-static struct svc_callout *svc_find(prog, vers, prev)
-u_long prog;
-u_long vers;
-struct svc_callout **prev;
-{
- register struct svc_callout *s, *p;
-
- p = NULL_SVC;
- for (s = svc_head; s != NULL_SVC; s = s->sc_next) {
- if ((s->sc_prog == prog) && (s->sc_vers == vers))
- goto done;
- p = s;
- }
- done:
- *prev = p;
- return (s);
-}
-
-/* ******************* REPLY GENERATION ROUTINES ************ */
-
-/*
- * Send a reply to an rpc request
- */
-bool_t svc_sendreply(xprt, xdr_results, xdr_location)
-register SVCXPRT *xprt;
-xdrproc_t xdr_results;
-caddr_t xdr_location;
-{
- struct rpc_msg rply;
-
- rply.rm_direction = REPLY;
- rply.rm_reply.rp_stat = MSG_ACCEPTED;
- rply.acpted_rply.ar_verf = xprt->xp_verf;
- rply.acpted_rply.ar_stat = SUCCESS;
- rply.acpted_rply.ar_results.where = xdr_location;
- rply.acpted_rply.ar_results.proc = xdr_results;
- return (SVC_REPLY(xprt, &rply));
-}
-
-/*
- * No procedure error reply
- */
-void svcerr_noproc(xprt)
-register SVCXPRT *xprt;
-{
- struct rpc_msg rply;
-
- rply.rm_direction = REPLY;
- rply.rm_reply.rp_stat = MSG_ACCEPTED;
- rply.acpted_rply.ar_verf = xprt->xp_verf;
- rply.acpted_rply.ar_stat = PROC_UNAVAIL;
- SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Can't decode args error reply
- */
-void svcerr_decode(xprt)
-register SVCXPRT *xprt;
-{
- struct rpc_msg rply;
-
- rply.rm_direction = REPLY;
- rply.rm_reply.rp_stat = MSG_ACCEPTED;
- rply.acpted_rply.ar_verf = xprt->xp_verf;
- rply.acpted_rply.ar_stat = GARBAGE_ARGS;
- SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Some system error
- */
-void svcerr_systemerr(xprt)
-register SVCXPRT *xprt;
-{
- struct rpc_msg rply;
-
- rply.rm_direction = REPLY;
- rply.rm_reply.rp_stat = MSG_ACCEPTED;
- rply.acpted_rply.ar_verf = xprt->xp_verf;
- rply.acpted_rply.ar_stat = SYSTEM_ERR;
- SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Authentication error reply
- */
-void svcerr_auth(xprt, why)
-SVCXPRT *xprt;
-enum auth_stat why;
-{
- struct rpc_msg rply;
-
- rply.rm_direction = REPLY;
- rply.rm_reply.rp_stat = MSG_DENIED;
- rply.rjcted_rply.rj_stat = AUTH_ERROR;
- rply.rjcted_rply.rj_why = why;
- SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Auth too weak error reply
- */
-void svcerr_weakauth(xprt)
-SVCXPRT *xprt;
-{
-
- svcerr_auth(xprt, AUTH_TOOWEAK);
-}
-
-/*
- * Program unavailable error reply
- */
-void svcerr_noprog(xprt)
-register SVCXPRT *xprt;
-{
- struct rpc_msg rply;
-
- rply.rm_direction = REPLY;
- rply.rm_reply.rp_stat = MSG_ACCEPTED;
- rply.acpted_rply.ar_verf = xprt->xp_verf;
- rply.acpted_rply.ar_stat = PROG_UNAVAIL;
- SVC_REPLY(xprt, &rply);
-}
-
-/*
- * Program version mismatch error reply
- */
-void svcerr_progvers(xprt, low_vers, high_vers)
-register SVCXPRT *xprt;
-u_long low_vers;
-u_long high_vers;
-{
- struct rpc_msg rply;
-
- rply.rm_direction = REPLY;
- rply.rm_reply.rp_stat = MSG_ACCEPTED;
- rply.acpted_rply.ar_verf = xprt->xp_verf;
- rply.acpted_rply.ar_stat = PROG_MISMATCH;
- rply.acpted_rply.ar_vers.low = low_vers;
- rply.acpted_rply.ar_vers.high = high_vers;
- SVC_REPLY(xprt, &rply);
-}
-
-/* ******************* SERVER INPUT STUFF ******************* */
-
-/*
- * Get server side input from some transport.
- *
- * Statement of authentication parameters management:
- * This function owns and manages all authentication parameters, specifically
- * the "raw" parameters (msg.rm_call.cb_cred and msg.rm_call.cb_verf) and
- * the "cooked" credentials (rqst->rq_clntcred).
- * However, this function does not know the structure of the cooked
- * credentials, so it make the following assumptions:
- * a) the structure is contiguous (no pointers), and
- * b) the cred structure size does not exceed RQCRED_SIZE bytes.
- * In all events, all three parameters are freed upon exit from this routine.
- * The storage is trivially management on the call stack in user land, but
- * is mallocated in kernel land.
- */
-
-void svc_getreq(rdfds)
-int rdfds;
-{
-#ifdef FD_SETSIZE
- fd_set readfds;
-
- FD_ZERO(&readfds);
-/*#ifdef __linux__*/
-#if 0
- readfds = rdfds;
-#else
- readfds.fds_bits[0] = rdfds;
-#endif
- svc_getreqset(&readfds);
-#else
- int readfds = rdfds & svc_fds;
-
- svc_getreqset(&readfds);
-#endif /* def FD_SETSIZE */
-}
-
-void svc_getreqset(readfds)
-#ifdef FD_SETSIZE
-fd_set *readfds;
-{
-#else
-int *readfds;
-{
- int readfds_local = *readfds;
-#endif /* def FD_SETSIZE */
- enum xprt_stat stat;
- struct rpc_msg msg;
- int prog_found;
- u_long low_vers;
- u_long high_vers;
- struct svc_req r;
- register SVCXPRT *xprt;
- register u_long mask;
- register int bit;
- register u_long *maskp;
- register int setsize;
- register int sock;
- char cred_area[2 * MAX_AUTH_BYTES + RQCRED_SIZE];
-
- msg.rm_call.cb_cred.oa_base = cred_area;
- msg.rm_call.cb_verf.oa_base = &(cred_area[MAX_AUTH_BYTES]);
- r.rq_clntcred = &(cred_area[2 * MAX_AUTH_BYTES]);
-
-
-#ifdef FD_SETSIZE
- setsize = _rpc_dtablesize();
-#ifdef __linux__
-/*#define NFDBITS 32*/
- maskp = (u_long *) readfds;
-#else
- maskp = (u_long *) readfds->fds_bits;
-#endif
- for (sock = 0; sock < setsize; sock += NFDBITS) {
- for (mask = *maskp++; (bit = ffs(mask)); mask ^= (1 << (bit - 1))) {
- /* sock has input waiting */
- xprt = xports[sock + bit - 1];
-#else
- for (sock = 0; readfds_local != 0; sock++, readfds_local >>= 1) {
- if ((readfds_local & 1) != 0) {
- /* sock has input waiting */
- xprt = xports[sock];
-#endif /* def FD_SETSIZE */
- /* now receive msgs from xprtprt (support batch calls) */
- do {
- if (SVC_RECV(xprt, &msg)) {
-
- /* now find the exported program and call it */
- register struct svc_callout *s;
- enum auth_stat why;
-
- r.rq_xprt = xprt;
- r.rq_prog = msg.rm_call.cb_prog;
- r.rq_vers = msg.rm_call.cb_vers;
- r.rq_proc = msg.rm_call.cb_proc;
- r.rq_cred = msg.rm_call.cb_cred;
- /* first authenticate the message */
- if ((why = _authenticate(&r, &msg)) != AUTH_OK) {
- svcerr_auth(xprt, why);
- goto call_done;
- }
- /* now match message with a registered service */
- prog_found = FALSE;
- low_vers = 0 - 1;
- high_vers = 0;
- for (s = svc_head; s != NULL_SVC; s = s->sc_next) {
- if (s->sc_prog == r.rq_prog) {
- if (s->sc_vers == r.rq_vers) {
- (*s->sc_dispatch) (&r, xprt);
- goto call_done;
- } /* found correct version */
- prog_found = TRUE;
- if (s->sc_vers < low_vers)
- low_vers = s->sc_vers;
- if (s->sc_vers > high_vers)
- high_vers = s->sc_vers;
- } /* found correct program */
- }
- /*
- * if we got here, the program or version
- * is not served ...
- */
- if (prog_found)
- svcerr_progvers(xprt, low_vers, high_vers);
- else
- svcerr_noprog(xprt);
- /* Fall through to ... */
- }
- call_done:
- if ((stat = SVC_STAT(xprt)) == XPRT_DIED) {
- SVC_DESTROY(xprt);
- break;
- }
- } while (stat == XPRT_MOREREQS);
- }
- }
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_auth.c b/mdk-stage1/dietlibc/librpc/svc_auth.c
deleted file mode 100644
index 336586d95..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_auth.c
+++ /dev/null
@@ -1,115 +0,0 @@
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)svc_auth.c 2.1 88/08/07 4.0 RPCSRC; from 1.19 87/08/11 Copyr 1984 Sun Micro";
-#endif
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * svc_auth_nodes.c, Server-side rpc authenticator interface,
- * *WITHOUT* DES authentication.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-
-/*
- * svcauthsw is the bdevsw of server side authentication.
- *
- * Server side authenticators are called from authenticate by
- * using the client auth struct flavor field to index into svcauthsw.
- * The server auth flavors must implement a routine that looks
- * like:
- *
- * enum auth_stat
- * flavorx_auth(rqst, msg)
- * register struct svc_req *rqst;
- * register struct rpc_msg *msg;
- *
- */
-
-enum auth_stat _svcauth_null(); /* no authentication */
-enum auth_stat _svcauth_unix(); /* unix style (uid, gids) */
-enum auth_stat _svcauth_short(); /* short hand unix style */
-
-static struct {
- enum auth_stat (*authenticator) ();
-} svcauthsw[] = {
- { _svcauth_null }, /* AUTH_NULL */
- { _svcauth_unix }, /* AUTH_UNIX */
- { _svcauth_short }, /* AUTH_SHORT */
-};
-
-#define AUTH_MAX 2 /* HIGHEST AUTH NUMBER */
-
-
-/*
- * The call rpc message, msg has been obtained from the wire. The msg contains
- * the raw form of credentials and verifiers. authenticate returns AUTH_OK
- * if the msg is successfully authenticated. If AUTH_OK then the routine also
- * does the following things:
- * set rqst->rq_xprt->verf to the appropriate response verifier;
- * sets rqst->rq_client_cred to the "cooked" form of the credentials.
- *
- * NB: rqst->rq_cxprt->verf must be pre-alloctaed;
- * its length is set appropriately.
- *
- * The caller still owns and is responsible for msg->u.cmb.cred and
- * msg->u.cmb.verf. The authentication system retains ownership of
- * rqst->rq_client_cred, the cooked credentials.
- *
- * There is an assumption that any flavour less than AUTH_NULL is
- * invalid.
- */
-enum auth_stat _authenticate(rqst, msg)
-register struct svc_req *rqst;
-struct rpc_msg *msg;
-{
- register int cred_flavor;
-
- rqst->rq_cred = msg->rm_call.cb_cred;
- rqst->rq_xprt->xp_verf.oa_flavor = _null_auth.oa_flavor;
- rqst->rq_xprt->xp_verf.oa_length = 0;
- cred_flavor = rqst->rq_cred.oa_flavor;
- if ((cred_flavor <= AUTH_MAX) && (cred_flavor >= AUTH_NULL)) {
- return ((*(svcauthsw[cred_flavor].authenticator)) (rqst, msg));
- }
-
- return (AUTH_REJECTEDCRED);
-}
-
-enum auth_stat _svcauth_null( /*rqst, msg */ )
- /*struct svc_req *rqst;
- struct rpc_msg *msg; */
-{
-
- return (AUTH_OK);
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_auth_unix.c b/mdk-stage1/dietlibc/librpc/svc_auth_unix.c
deleted file mode 100644
index 7e0305f0a..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_auth_unix.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* @(#)svc_auth_unix.c 2.3 88/08/01 4.0 RPCSRC; from 1.28 88/02/08 SMI */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)svc_auth_unix.c 1.28 88/02/08 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc_auth_unix.c
- * Handles UNIX flavor authentication parameters on the service side of rpc.
- * There are two svc auth implementations here: AUTH_UNIX and AUTH_SHORT.
- * _svcauth_unix does full blown unix style uid,gid+gids auth,
- * _svcauth_short uses a shorthand auth to index into a cache of longhand auths.
- * Note: the shorthand has been gutted for efficiency.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <string.h>
-
-/*
- * Unix longhand authenticator
- */
-enum auth_stat _svcauth_unix(rqst, msg)
-register struct svc_req *rqst;
-register struct rpc_msg *msg;
-{
- register enum auth_stat stat;
- XDR xdrs;
- register struct authunix_parms *aup;
- register int32_t *buf;
- struct area {
- struct authunix_parms area_aup;
- char area_machname[MAX_MACHINE_NAME + 1];
- gid_t area_gids[NGRPS];
- } *area;
- u_int auth_len;
- int str_len, gid_len;
- register int i;
-
- area = (struct area *) rqst->rq_clntcred;
- aup = &area->area_aup;
- aup->aup_machname = area->area_machname;
- aup->aup_gids = area->area_gids;
- auth_len = (u_int) msg->rm_call.cb_cred.oa_length;
- xdrmem_create(&xdrs, msg->rm_call.cb_cred.oa_base, auth_len,
- XDR_DECODE);
- buf = XDR_INLINE(&xdrs, auth_len);
- if (buf != NULL) {
- aup->aup_time = IXDR_GET_LONG(buf);
- str_len = IXDR_GET_U_LONG(buf);
- if (str_len > MAX_MACHINE_NAME) {
- stat = AUTH_BADCRED;
- goto done;
- }
- bcopy((caddr_t) buf, aup->aup_machname, (u_int) str_len);
- aup->aup_machname[str_len] = 0;
- str_len = RNDUP(str_len);
- buf += str_len / sizeof(long);
-
- aup->aup_uid = IXDR_GET_LONG(buf);
- aup->aup_gid = IXDR_GET_LONG(buf);
- gid_len = IXDR_GET_U_LONG(buf);
- if (gid_len > NGRPS) {
- stat = AUTH_BADCRED;
- goto done;
- }
- aup->aup_len = gid_len;
- for (i = 0; i < gid_len; i++) {
- aup->aup_gids[i] = IXDR_GET_LONG(buf);
- }
- /*
- * five is the smallest unix credentials structure -
- * timestamp, hostname len (0), uid, gid, and gids len (0).
- */
- if ((5 + gid_len) * BYTES_PER_XDR_UNIT + str_len > auth_len) {
- (void) printf("bad auth_len gid %d str %d auth %d\n",
- gid_len, str_len, auth_len);
- stat = AUTH_BADCRED;
- goto done;
- }
- } else if (!xdr_authunix_parms(&xdrs, aup)) {
- xdrs.x_op = XDR_FREE;
- (void) xdr_authunix_parms(&xdrs, aup);
- stat = AUTH_BADCRED;
- goto done;
- }
- rqst->rq_xprt->xp_verf.oa_flavor = AUTH_NULL;
- rqst->rq_xprt->xp_verf.oa_length = 0;
- stat = AUTH_OK;
- done:
- XDR_DESTROY(&xdrs);
- return (stat);
-}
-
-
-/*
- * Shorthand unix authenticator
- * Looks up longhand in a cache.
- */
- /*ARGSUSED*/ enum auth_stat _svcauth_short(rqst, msg)
-struct svc_req *rqst;
-struct rpc_msg *msg;
-{
- return (AUTH_REJECTEDCRED);
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_raw.c b/mdk-stage1/dietlibc/librpc/svc_raw.c
deleted file mode 100644
index c13ea5e06..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_raw.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/* @(#)svc_raw.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc_raw.c 1.15 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc_raw.c, This a toy for simple testing and timing.
- * Interface to create an rpc client and server in the same UNIX process.
- * This lets us similate rpc and get rpc (round trip) overhead, without
- * any interference from the kernal.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <rpc/rpc.h>
-
-
-/*
- * This is the "network" that we will be moving data over
- */
-static struct svcraw_private {
- char _raw_buf[UDPMSGSIZE];
- SVCXPRT server;
- XDR xdr_stream;
- char verf_body[MAX_AUTH_BYTES];
-} *svcraw_private;
-
-static bool_t svcraw_recv();
-static enum xprt_stat svcraw_stat();
-static bool_t svcraw_getargs();
-static bool_t svcraw_reply();
-static bool_t svcraw_freeargs();
-static void svcraw_destroy();
-
-static struct xp_ops server_ops = {
- svcraw_recv,
- svcraw_stat,
- svcraw_getargs,
- svcraw_reply,
- svcraw_freeargs,
- svcraw_destroy
-};
-
-SVCXPRT *svcraw_create()
-{
- register struct svcraw_private *srp = svcraw_private;
-
- if (srp == 0) {
- srp = (struct svcraw_private *) calloc(1, sizeof(*srp));
- if (srp == 0)
- return (0);
- }
- srp->server.xp_sock = 0;
- srp->server.xp_port = 0;
- srp->server.xp_ops = &server_ops;
- srp->server.xp_verf.oa_base = srp->verf_body;
- xdrmem_create(&srp->xdr_stream, srp->_raw_buf, UDPMSGSIZE, XDR_FREE);
- return (&srp->server);
-}
-
-static enum xprt_stat svcraw_stat()
-{
-
- return (XPRT_IDLE);
-}
-
-static bool_t svcraw_recv(xprt, msg)
-SVCXPRT *xprt;
-struct rpc_msg *msg;
-{
- register struct svcraw_private *srp = svcraw_private;
- register XDR *xdrs;
-
- if (srp == 0)
- return (0);
- xdrs = &srp->xdr_stream;
- xdrs->x_op = XDR_DECODE;
- XDR_SETPOS(xdrs, 0);
- if (!xdr_callmsg(xdrs, msg))
- return (FALSE);
- return (TRUE);
-}
-
-static bool_t svcraw_reply(xprt, msg)
-SVCXPRT *xprt;
-struct rpc_msg *msg;
-{
- register struct svcraw_private *srp = svcraw_private;
- register XDR *xdrs;
-
- if (srp == 0)
- return (FALSE);
- xdrs = &srp->xdr_stream;
- xdrs->x_op = XDR_ENCODE;
- XDR_SETPOS(xdrs, 0);
- if (!xdr_replymsg(xdrs, msg))
- return (FALSE);
- (void) XDR_GETPOS(xdrs); /* called just for overhead */
- return (TRUE);
-}
-
-static bool_t svcraw_getargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
- register struct svcraw_private *srp = svcraw_private;
-
- if (srp == 0)
- return (FALSE);
- return ((*xdr_args) (&srp->xdr_stream, args_ptr));
-}
-
-static bool_t svcraw_freeargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
- register struct svcraw_private *srp = svcraw_private;
- register XDR *xdrs;
-
- if (srp == 0)
- return (FALSE);
- xdrs = &srp->xdr_stream;
- xdrs->x_op = XDR_FREE;
- return ((*xdr_args) (xdrs, args_ptr));
-}
-
-static void svcraw_destroy()
-{
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_run.c b/mdk-stage1/dietlibc/librpc/svc_run.c
deleted file mode 100644
index c7150e357..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_run.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* @(#)svc_run.c 2.1 88/07/29 4.0 RPCSRC */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc_run.c 1.1 87/10/13 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-
-/*
- * This is the rpc server side idle loop
- * Wait for input, call server program.
- */
-#include <rpc/rpc.h>
-#include <errno.h>
-#include <unistd.h>
-
-void svc_run()
-{
-#ifdef FD_SETSIZE
- fd_set readfds;
-#else
- int readfds;
-#endif /* def FD_SETSIZE */
- extern int errno;
-
- for (;;) {
-#ifdef FD_SETSIZE
- readfds = svc_fdset;
-#else
- readfds = svc_fds;
-#endif /* def FD_SETSIZE */
- switch (select(_rpc_dtablesize(), &readfds, 0, 0, 0)) {
- case -1:
- if (errno == EINTR) {
- continue;
- }
- perror("svc_run: - select failed");
- return;
- case 0:
- continue;
- default:
- svc_getreqset(&readfds);
- }
- }
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_simple.c b/mdk-stage1/dietlibc/librpc/svc_simple.c
deleted file mode 100644
index 0bb9a19eb..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_simple.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* @(#)svc_simple.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)svc_simple.c 1.18 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc_simple.c
- * Simplified front end to rpc.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <netdb.h>
-#include <rpc/pmap_clnt.h>
-#include <string.h>
-
-static struct proglst {
- char *(*p_progname) ();
- int p_prognum;
- int p_procnum;
- xdrproc_t p_inproc, p_outproc;
- struct proglst *p_nxt;
-} *proglst;
-static void universal();
-static SVCXPRT *transp;
-struct proglst *pl;
-
-int registerrpc(int prognum, int versnum, int procnum, char *(*progname)(), xdrproc_t inproc, xdrproc_t outproc)
-{
-
- if (procnum == NULLPROC) {
- (void) fprintf(stderr,
- "can't reassign procedure number %d\n", NULLPROC);
- return (-1);
- }
- if (transp == 0) {
- transp = svcudp_create(RPC_ANYSOCK);
- if (transp == NULL) {
- (void) fprintf(stderr, "couldn't create an rpc server\n");
- return (-1);
- }
- }
- (void) pmap_unset((u_long) prognum, (u_long) versnum);
- if (!svc_register(transp, (u_long) prognum, (u_long) versnum,
- universal, IPPROTO_UDP)) {
- (void) fprintf(stderr, "couldn't register prog %d vers %d\n",
- prognum, versnum);
- return (-1);
- }
- pl = (struct proglst *) malloc(sizeof(struct proglst));
-
- if (pl == NULL) {
- (void) fprintf(stderr, "registerrpc: out of memory\n");
- return (-1);
- }
- pl->p_progname = progname;
- pl->p_prognum = prognum;
- pl->p_procnum = procnum;
- pl->p_inproc = inproc;
- pl->p_outproc = outproc;
- pl->p_nxt = proglst;
- proglst = pl;
- return (0);
-}
-
-static void universal(rqstp, transp)
-struct svc_req *rqstp;
-SVCXPRT *transp;
-{
- int prog, proc;
- char *outdata;
- char xdrbuf[UDPMSGSIZE];
- struct proglst *pl;
-
- /*
- * enforce "procnum 0 is echo" convention
- */
- if (rqstp->rq_proc == NULLPROC) {
- if (svc_sendreply(transp, (xdrproc_t)xdr_void, (char *) NULL) == FALSE) {
- (void) fprintf(stderr, "xxx\n");
- exit(1);
- }
- return;
- }
- prog = rqstp->rq_prog;
- proc = rqstp->rq_proc;
- for (pl = proglst; pl != NULL; pl = pl->p_nxt)
- if (pl->p_prognum == prog && pl->p_procnum == proc) {
- /* decode arguments into a CLEAN buffer */
- bzero(xdrbuf, sizeof(xdrbuf)); /* required ! */
- if (!svc_getargs(transp, pl->p_inproc, xdrbuf)) {
- svcerr_decode(transp);
- return;
- }
- outdata = (*(pl->p_progname)) (xdrbuf);
- if (outdata == NULL && pl->p_outproc != (xdrproc_t)xdr_void)
- /* there was an error */
- return;
- if (!svc_sendreply(transp, pl->p_outproc, outdata)) {
- (void) fprintf(stderr,
- "trouble replying to prog %d\n",
- pl->p_prognum);
- exit(1);
- }
- /* free the decoded arguments */
- (void) svc_freeargs(transp, pl->p_inproc, xdrbuf);
- return;
- }
- (void) fprintf(stderr, "never registered prog %d\n", prog);
- exit(1);
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_tcp.c b/mdk-stage1/dietlibc/librpc/svc_tcp.c
deleted file mode 100644
index 6edafa1b1..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_tcp.c
+++ /dev/null
@@ -1,406 +0,0 @@
-/* @(#)svc_tcp.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc_tcp.c 1.21 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc_tcp.c, Server side for TCP/IP based RPC.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * Actually implements two flavors of transporter -
- * a tcp rendezvouser (a listner and connection establisher)
- * and a record/tcp stream.
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-
-/*
- * Ops vector for TCP/IP based rpc service handle
- */
-static bool_t svctcp_recv();
-static enum xprt_stat svctcp_stat();
-static bool_t svctcp_getargs();
-static bool_t svctcp_reply();
-static bool_t svctcp_freeargs();
-static void svctcp_destroy();
-
-static struct xp_ops svctcp_op = {
- svctcp_recv,
- svctcp_stat,
- svctcp_getargs,
- svctcp_reply,
- svctcp_freeargs,
- svctcp_destroy
-};
-
-/*
- * Ops vector for TCP/IP rendezvous handler
- */
-static bool_t rendezvous_request();
-static enum xprt_stat rendezvous_stat();
-
-static struct xp_ops svctcp_rendezvous_op = {
- rendezvous_request,
- rendezvous_stat,
- (void*)abort,
- (void*)abort,
- (void*)abort,
- svctcp_destroy
-};
-
-static int readtcp(), writetcp();
-static SVCXPRT *makefd_xprt();
-
-struct tcp_rendezvous { /* kept in xprt->xp_p1 */
- u_int sendsize;
- u_int recvsize;
-};
-
-struct tcp_conn { /* kept in xprt->xp_p1 */
- enum xprt_stat strm_stat;
- u_long x_id;
- XDR xdrs;
- char verf_body[MAX_AUTH_BYTES];
-};
-
-/*
- * Usage:
- * xprt = svctcp_create(sock, send_buf_size, recv_buf_size);
- *
- * Creates, registers, and returns a (rpc) tcp based transporter.
- * Once *xprt is initialized, it is registered as a transporter
- * see (svc.h, xprt_register). This routine returns
- * a NULL if a problem occurred.
- *
- * If sock<0 then a socket is created, else sock is used.
- * If the socket, sock is not bound to a port then svctcp_create
- * binds it to an arbitrary port. The routine then starts a tcp
- * listener on the socket's associated port. In any (successful) case,
- * xprt->xp_sock is the registered socket number and xprt->xp_port is the
- * associated port number.
- *
- * Since tcp streams do buffered io similar to stdio, the caller can specify
- * how big the send and receive buffers are via the second and third parms;
- * 0 => use the system default.
- */
-SVCXPRT *svctcp_create(sock, sendsize, recvsize)
-register int sock;
-u_int sendsize;
-u_int recvsize;
-{
- bool_t madesock = FALSE;
- register SVCXPRT *xprt;
- register struct tcp_rendezvous *r;
- struct sockaddr_in addr;
- int len = sizeof(struct sockaddr_in);
-
- if (sock == RPC_ANYSOCK) {
- if ((sock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP)) < 0) {
- perror("svc_tcp.c - tcp socket creation problem");
- return ((SVCXPRT *) NULL);
- }
- madesock = TRUE;
- }
- bzero((char *) &addr, sizeof(addr));
- addr.sin_family = AF_INET;
- if (bindresvport(sock, &addr)) {
- addr.sin_port = 0;
- (void) bind(sock, (struct sockaddr *) &addr, len);
- }
- if ((getsockname(sock, (struct sockaddr *) &addr, &len) != 0) ||
- (listen(sock, 2) != 0)) {
- perror("svctcp_.c - cannot getsockname or listen");
- if (madesock)
- (void) close(sock);
- return ((SVCXPRT *) NULL);
- }
- r = (struct tcp_rendezvous *) mem_alloc(sizeof(*r));
- if (r == NULL) {
- (void) fprintf(stderr, "svctcp_create: out of memory\n");
- return (NULL);
- }
- r->sendsize = sendsize;
- r->recvsize = recvsize;
- xprt = (SVCXPRT *) mem_alloc(sizeof(SVCXPRT));
- if (xprt == NULL) {
- (void) fprintf(stderr, "svctcp_create: out of memory\n");
- return (NULL);
- }
- xprt->xp_p2 = NULL;
- xprt->xp_p1 = (caddr_t) r;
- xprt->xp_verf = _null_auth;
- xprt->xp_ops = &svctcp_rendezvous_op;
- xprt->xp_port = ntohs(addr.sin_port);
- xprt->xp_sock = sock;
- xprt_register(xprt);
- return (xprt);
-}
-
-/*
- * Like svtcp_create(), except the routine takes any *open* UNIX file
- * descriptor as its first input.
- */
-SVCXPRT *svcfd_create(fd, sendsize, recvsize)
-int fd;
-u_int sendsize;
-u_int recvsize;
-{
-
- return (makefd_xprt(fd, sendsize, recvsize));
-}
-
-static SVCXPRT *makefd_xprt(fd, sendsize, recvsize)
-int fd;
-u_int sendsize;
-u_int recvsize;
-{
- register SVCXPRT *xprt;
- register struct tcp_conn *cd;
-
- xprt = (SVCXPRT *) mem_alloc(sizeof(SVCXPRT));
- if (xprt == (SVCXPRT *) NULL) {
- (void) fprintf(stderr, "svc_tcp: makefd_xprt: out of memory\n");
- goto done;
- }
- cd = (struct tcp_conn *) mem_alloc(sizeof(struct tcp_conn));
-
- if (cd == (struct tcp_conn *) NULL) {
- (void) fprintf(stderr, "svc_tcp: makefd_xprt: out of memory\n");
- mem_free((char *) xprt, sizeof(SVCXPRT));
- xprt = (SVCXPRT *) NULL;
- goto done;
- }
- cd->strm_stat = XPRT_IDLE;
- xdrrec_create(&(cd->xdrs), sendsize, recvsize,
- (caddr_t) xprt, readtcp, writetcp);
- xprt->xp_p2 = NULL;
- xprt->xp_p1 = (caddr_t) cd;
- xprt->xp_verf.oa_base = cd->verf_body;
- xprt->xp_addrlen = 0;
- xprt->xp_ops = &svctcp_op; /* truely deals with calls */
- xprt->xp_port = 0; /* this is a connection, not a rendezvouser */
- xprt->xp_sock = fd;
- xprt_register(xprt);
- done:
- return (xprt);
-}
-
-static bool_t rendezvous_request(xprt)
-register SVCXPRT *xprt;
-{
- int sock;
- struct tcp_rendezvous *r;
- struct sockaddr_in addr;
- int len;
-
- r = (struct tcp_rendezvous *) xprt->xp_p1;
- again:
- len = sizeof(struct sockaddr_in);
-
- if ((sock = accept(xprt->xp_sock, (struct sockaddr *) &addr,
- &len)) < 0) {
- if (errno == EINTR)
- goto again;
- return (FALSE);
- }
- /*
- * make a new transporter (re-uses xprt)
- */
- xprt = makefd_xprt(sock, r->sendsize, r->recvsize);
- xprt->xp_raddr = addr;
- xprt->xp_addrlen = len;
- return (FALSE); /* there is never an rpc msg to be processed */
-}
-
-static enum xprt_stat rendezvous_stat()
-{
-
- return (XPRT_IDLE);
-}
-
-static void svctcp_destroy(xprt)
-register SVCXPRT *xprt;
-{
- register struct tcp_conn *cd = (struct tcp_conn *) xprt->xp_p1;
-
- xprt_unregister(xprt);
- (void) close(xprt->xp_sock);
- if (xprt->xp_port != 0) {
- /* a rendezvouser socket */
- xprt->xp_port = 0;
- } else {
- /* an actual connection socket */
- XDR_DESTROY(&(cd->xdrs));
- }
- mem_free((caddr_t) cd, sizeof(struct tcp_conn));
-
- mem_free((caddr_t) xprt, sizeof(SVCXPRT));
-}
-
-/*
- * All read operations timeout after 35 seconds.
- * A timeout is fatal for the connection.
- */
-static struct timeval wait_per_try = { 35, 0 };
-
-/*
- * reads data from the tcp conection.
- * any error is fatal and the connection is closed.
- * (And a read of zero bytes is a half closed stream => error.)
- */
-static int readtcp(xprt, buf, len)
-register SVCXPRT *xprt;
-caddr_t buf;
-register int len;
-{
- register int sock = xprt->xp_sock;
-
-#ifdef FD_SETSIZE
- fd_set mask;
- fd_set readfds;
-
- FD_ZERO(&mask);
- FD_SET(sock, &mask);
-#else
- register int mask = 1 << sock;
- int readfds;
-#endif /* def FD_SETSIZE */
- do {
- readfds = mask;
- if (select(_rpc_dtablesize(), &readfds, 0, 0, &wait_per_try) <= 0) {
- if (errno == EINTR) {
- continue;
- }
- goto fatal_err;
- }
-#ifdef FD_SETSIZE
- } while (!FD_ISSET(sock, &readfds));
-#else
- } while (readfds != mask);
-#endif /* def FD_SETSIZE */
- if ((len = read(sock, buf, len)) > 0) {
- return (len);
- }
- fatal_err:
- ((struct tcp_conn *) (xprt->xp_p1))->strm_stat = XPRT_DIED;
- return (-1);
-}
-
-/*
- * writes data to the tcp connection.
- * Any error is fatal and the connection is closed.
- */
-static int writetcp(xprt, buf, len)
-register SVCXPRT *xprt;
-caddr_t buf;
-int len;
-{
- register int i, cnt;
-
- for (cnt = len; cnt > 0; cnt -= i, buf += i) {
- if ((i = write(xprt->xp_sock, buf, cnt)) < 0) {
- ((struct tcp_conn *) (xprt->xp_p1))->strm_stat = XPRT_DIED;
- return (-1);
- }
- }
- return (len);
-}
-
-static enum xprt_stat svctcp_stat(xprt)
-SVCXPRT *xprt;
-{
- register struct tcp_conn *cd = (struct tcp_conn *) (xprt->xp_p1);
-
- if (cd->strm_stat == XPRT_DIED)
- return (XPRT_DIED);
- if (!xdrrec_eof(&(cd->xdrs)))
- return (XPRT_MOREREQS);
- return (XPRT_IDLE);
-}
-
-static bool_t svctcp_recv(xprt, msg)
-SVCXPRT *xprt;
-register struct rpc_msg *msg;
-{
- register struct tcp_conn *cd = (struct tcp_conn *) (xprt->xp_p1);
- register XDR *xdrs = &(cd->xdrs);
-
- xdrs->x_op = XDR_DECODE;
- (void) xdrrec_skiprecord(xdrs);
- if (xdr_callmsg(xdrs, msg)) {
- cd->x_id = msg->rm_xid;
- return (TRUE);
- }
- return (FALSE);
-}
-
-static bool_t svctcp_getargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
-
- return ((*xdr_args)
- (&(((struct tcp_conn *) (xprt->xp_p1))->xdrs), args_ptr));
-}
-
-static bool_t svctcp_freeargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
- register XDR *xdrs = &(((struct tcp_conn *) (xprt->xp_p1))->xdrs);
-
- xdrs->x_op = XDR_FREE;
- return ((*xdr_args) (xdrs, args_ptr));
-}
-
-static bool_t svctcp_reply(xprt, msg)
-SVCXPRT *xprt;
-register struct rpc_msg *msg;
-{
- register struct tcp_conn *cd = (struct tcp_conn *) (xprt->xp_p1);
- register XDR *xdrs = &(cd->xdrs);
- register bool_t stat;
-
- xdrs->x_op = XDR_ENCODE;
- msg->rm_xid = cd->x_id;
- stat = xdr_replymsg(xdrs, msg);
- (void) xdrrec_endofrecord(xdrs, TRUE);
- return (stat);
-}
diff --git a/mdk-stage1/dietlibc/librpc/svc_udp.c b/mdk-stage1/dietlibc/librpc/svc_udp.c
deleted file mode 100644
index 1cdb5ce91..000000000
--- a/mdk-stage1/dietlibc/librpc/svc_udp.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/* @(#)svc_udp.c 2.2 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)svc_udp.c 1.24 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * svc_udp.c,
- * Server side for UDP/IP based RPC. (Does some caching in the hopes of
- * achieving execute-at-most-once semantics.)
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- */
-
-#include <stdio.h>
-#include <rpc/rpc.h>
-#include <sys/socket.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-
-
-#define rpc_buffer(xprt) ((xprt)->xp_p1)
-#define MAX(a, b) ((a > b) ? a : b)
-
-static bool_t svcudp_recv();
-static bool_t svcudp_reply();
-static enum xprt_stat svcudp_stat();
-static bool_t svcudp_getargs();
-static bool_t svcudp_freeargs();
-static void svcudp_destroy();
-
-static struct xp_ops svcudp_op = {
- svcudp_recv,
- svcudp_stat,
- svcudp_getargs,
- svcudp_reply,
- svcudp_freeargs,
- svcudp_destroy
-};
-
-extern int errno;
-
-/*
- * kept in xprt->xp_p2
- */
-struct svcudp_data {
- u_int su_iosz; /* byte size of send.recv buffer */
- u_long su_xid; /* transaction id */
- XDR su_xdrs; /* XDR handle */
- char su_verfbody[MAX_AUTH_BYTES]; /* verifier body */
- char *su_cache; /* cached data, NULL if no cache */
-};
-
-#define su_data(xprt) ((struct svcudp_data *)(xprt->xp_p2))
-
-static int cache_get(SVCXPRT* xprt, struct rpc_msg* msg, char** replyp, u_long* replylenp);
-static void cache_set(SVCXPRT* xprt, u_long replylen);
-
-/*
- * Usage:
- * xprt = svcudp_create(sock);
- *
- * If sock<0 then a socket is created, else sock is used.
- * If the socket, sock is not bound to a port then svcudp_create
- * binds it to an arbitrary port. In any (successful) case,
- * xprt->xp_sock is the registered socket number and xprt->xp_port is the
- * associated port number.
- * Once *xprt is initialized, it is registered as a transporter;
- * see (svc.h, xprt_register).
- * The routines returns NULL if a problem occurred.
- */
-SVCXPRT *svcudp_bufcreate(sock, sendsz, recvsz)
-register int sock;
-u_int sendsz, recvsz;
-{
- bool_t madesock = FALSE;
- register SVCXPRT *xprt;
- register struct svcudp_data *su;
- struct sockaddr_in addr;
- int len = sizeof(struct sockaddr_in);
-
- if (sock == RPC_ANYSOCK) {
- if ((sock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP)) < 0) {
- perror("svcudp_create: socket creation problem");
- return ((SVCXPRT *) NULL);
- }
- madesock = TRUE;
- }
- bzero((char *) &addr, sizeof(addr));
- addr.sin_family = AF_INET;
- if (bindresvport(sock, &addr)) {
- addr.sin_port = 0;
- (void) bind(sock, (struct sockaddr *) &addr, len);
- }
- if (getsockname(sock, (struct sockaddr *) &addr, &len) != 0) {
- perror("svcudp_create - cannot getsockname");
- if (madesock)
- (void) close(sock);
- return ((SVCXPRT *) NULL);
- }
- xprt = (SVCXPRT *) mem_alloc(sizeof(SVCXPRT));
- if (xprt == NULL) {
- (void) fprintf(stderr, "svcudp_create: out of memory\n");
- return (NULL);
- }
- su = (struct svcudp_data *) mem_alloc(sizeof(*su));
- if (su == NULL) {
- (void) fprintf(stderr, "svcudp_create: out of memory\n");
- return (NULL);
- }
- su->su_iosz = ((MAX(sendsz, recvsz) + 3) / 4) * 4;
- if ((rpc_buffer(xprt) = mem_alloc(su->su_iosz)) == NULL) {
- (void) fprintf(stderr, "svcudp_create: out of memory\n");
- return (NULL);
- }
- xdrmem_create(&(su->su_xdrs), rpc_buffer(xprt), su->su_iosz,
- XDR_DECODE);
- su->su_cache = NULL;
- xprt->xp_p2 = (caddr_t) su;
- xprt->xp_verf.oa_base = su->su_verfbody;
- xprt->xp_ops = &svcudp_op;
- xprt->xp_port = ntohs(addr.sin_port);
- xprt->xp_sock = sock;
- xprt_register(xprt);
- return (xprt);
-}
-
-SVCXPRT *svcudp_create(sock)
-int sock;
-{
-
- return (svcudp_bufcreate(sock, UDPMSGSIZE, UDPMSGSIZE));
-}
-
-static enum xprt_stat svcudp_stat(xprt)
-SVCXPRT *xprt;
-{
-
- return (XPRT_IDLE);
-}
-
-static bool_t svcudp_recv(xprt, msg)
-register SVCXPRT *xprt;
-struct rpc_msg *msg;
-{
- register struct svcudp_data *su = su_data(xprt);
- register XDR *xdrs = &(su->su_xdrs);
- register int rlen;
- char *reply;
- u_long replylen;
-
- again:
- xprt->xp_addrlen = sizeof(struct sockaddr_in);
-
- rlen = recvfrom(xprt->xp_sock, rpc_buffer(xprt), (int) su->su_iosz,
- 0, (struct sockaddr *) &(xprt->xp_raddr),
- &(xprt->xp_addrlen));
- if (rlen == -1 && errno == EINTR)
- goto again;
- if (rlen < 4 * sizeof(u_long))
- return (FALSE);
- xdrs->x_op = XDR_DECODE;
- XDR_SETPOS(xdrs, 0);
- if (!xdr_callmsg(xdrs, msg))
- return (FALSE);
- su->su_xid = msg->rm_xid;
- if (su->su_cache != NULL) {
- if (cache_get(xprt, msg, &reply, &replylen)) {
- (void) sendto(xprt->xp_sock, reply, (int) replylen, 0,
- (struct sockaddr *) &xprt->xp_raddr,
- xprt->xp_addrlen);
- return (TRUE);
- }
- }
- return (TRUE);
-}
-
-static bool_t svcudp_reply(xprt, msg)
-register SVCXPRT *xprt;
-struct rpc_msg *msg;
-{
- register struct svcudp_data *su = su_data(xprt);
- register XDR *xdrs = &(su->su_xdrs);
- register int slen;
- register bool_t stat = FALSE;
-
- xdrs->x_op = XDR_ENCODE;
- XDR_SETPOS(xdrs, 0);
- msg->rm_xid = su->su_xid;
- if (xdr_replymsg(xdrs, msg)) {
- slen = (int) XDR_GETPOS(xdrs);
- if (sendto(xprt->xp_sock, rpc_buffer(xprt), slen, 0,
- (struct sockaddr *) &(xprt->xp_raddr), xprt->xp_addrlen)
- == slen) {
- stat = TRUE;
- if (su->su_cache && slen >= 0) {
- cache_set(xprt, (u_long) slen);
- }
- }
- }
- return (stat);
-}
-
-static bool_t svcudp_getargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
-
- return ((*xdr_args) (&(su_data(xprt)->su_xdrs), args_ptr));
-}
-
-static bool_t svcudp_freeargs(xprt, xdr_args, args_ptr)
-SVCXPRT *xprt;
-xdrproc_t xdr_args;
-caddr_t args_ptr;
-{
- register XDR *xdrs = &(su_data(xprt)->su_xdrs);
-
- xdrs->x_op = XDR_FREE;
- return ((*xdr_args) (xdrs, args_ptr));
-}
-
-static void svcudp_destroy(xprt)
-register SVCXPRT *xprt;
-{
- register struct svcudp_data *su = su_data(xprt);
-
- xprt_unregister(xprt);
- (void) close(xprt->xp_sock);
- XDR_DESTROY(&(su->su_xdrs));
- mem_free(rpc_buffer(xprt), su->su_iosz);
- mem_free((caddr_t) su, sizeof(struct svcudp_data));
-
- mem_free((caddr_t) xprt, sizeof(SVCXPRT));
-}
-
-
-/***********this could be a separate file*********************/
-
-/*
- * Fifo cache for udp server
- * Copies pointers to reply buffers into fifo cache
- * Buffers are sent again if retransmissions are detected.
- */
-
-#define SPARSENESS 4 /* 75% sparse */
-
-#define CACHE_PERROR(msg) \
- (void) fprintf(stderr,"%s\n", msg)
-
-#define ALLOC(type, size) \
- (type *) mem_alloc((unsigned) (sizeof(type) * (size)))
-
-#define BZERO(addr, type, size) \
- bzero((char *) addr, sizeof(type) * (int) (size))
-
-/*
- * An entry in the cache
- */
-typedef struct cache_node *cache_ptr;
-struct cache_node {
- /*
- * Index into cache is xid, proc, vers, prog and address
- */
- u_long cache_xid;
- u_long cache_proc;
- u_long cache_vers;
- u_long cache_prog;
- struct sockaddr_in cache_addr;
- /*
- * The cached reply and length
- */
- char *cache_reply;
- u_long cache_replylen;
- /*
- * Next node on the list, if there is a collision
- */
- cache_ptr cache_next;
-};
-
-
-
-/*
- * The entire cache
- */
-struct udp_cache {
- u_long uc_size; /* size of cache */
- cache_ptr *uc_entries; /* hash table of entries in cache */
- cache_ptr *uc_fifo; /* fifo list of entries in cache */
- u_long uc_nextvictim; /* points to next victim in fifo list */
- u_long uc_prog; /* saved program number */
- u_long uc_vers; /* saved version number */
- u_long uc_proc; /* saved procedure number */
- struct sockaddr_in uc_addr; /* saved caller's address */
-};
-
-
-/*
- * the hashing function
- */
-#define CACHE_LOC(transp, xid) \
- (xid % (SPARSENESS*((struct udp_cache *) su_data(transp)->su_cache)->uc_size))
-
-
-/*
- * Enable use of the cache.
- * Note: there is no disable.
- */
-int svcudp_enablecache(SVCXPRT* transp, u_long size)
-{
- struct svcudp_data *su = su_data(transp);
- struct udp_cache *uc;
-
- if (su->su_cache != NULL) {
- CACHE_PERROR("enablecache: cache already enabled");
- return (0);
- }
- uc = ALLOC(struct udp_cache, 1);
- if (uc == NULL) {
- CACHE_PERROR("enablecache: could not allocate cache");
- return (0);
- }
- uc->uc_size = size;
- uc->uc_nextvictim = 0;
- uc->uc_entries = ALLOC(cache_ptr, size * SPARSENESS);
- if (uc->uc_entries == NULL) {
- CACHE_PERROR("enablecache: could not allocate cache data");
- return (0);
- }
- BZERO(uc->uc_entries, cache_ptr, size * SPARSENESS);
- uc->uc_fifo = ALLOC(cache_ptr, size);
- if (uc->uc_fifo == NULL) {
- CACHE_PERROR("enablecache: could not allocate cache fifo");
- return (0);
- }
- BZERO(uc->uc_fifo, cache_ptr, size);
- su->su_cache = (char *) uc;
- return (1);
-}
-
-
-/*
- * Set an entry in the cache
- */
-static void cache_set(SVCXPRT* xprt, u_long replylen)
-{
- register cache_ptr victim;
- register cache_ptr *vicp;
- register struct svcudp_data *su = su_data(xprt);
- struct udp_cache *uc = (struct udp_cache *) su->su_cache;
- u_int loc;
- char *newbuf;
-
- /*
- * Find space for the new entry, either by
- * reusing an old entry, or by mallocing a new one
- */
- victim = uc->uc_fifo[uc->uc_nextvictim];
- if (victim != NULL) {
- loc = CACHE_LOC(xprt, victim->cache_xid);
- for (vicp = &uc->uc_entries[loc];
- *vicp != NULL && *vicp != victim;
- vicp = &(*vicp)->cache_next);
- if (*vicp == NULL) {
- CACHE_PERROR("cache_set: victim not found");
- return;
- }
- *vicp = victim->cache_next; /* remote from cache */
- newbuf = victim->cache_reply;
- } else {
- victim = ALLOC(struct cache_node, 1);
-
- if (victim == NULL) {
- CACHE_PERROR("cache_set: victim alloc failed");
- return;
- }
- newbuf = mem_alloc(su->su_iosz);
- if (newbuf == NULL) {
- CACHE_PERROR("cache_set: could not allocate new rpc_buffer");
- return;
- }
- }
-
- /*
- * Store it away
- */
- victim->cache_replylen = replylen;
- victim->cache_reply = rpc_buffer(xprt);
- rpc_buffer(xprt) = newbuf;
- xdrmem_create(&(su->su_xdrs), rpc_buffer(xprt), su->su_iosz,
- XDR_ENCODE);
- victim->cache_xid = su->su_xid;
- victim->cache_proc = uc->uc_proc;
- victim->cache_vers = uc->uc_vers;
- victim->cache_prog = uc->uc_prog;
- victim->cache_addr = uc->uc_addr;
- loc = CACHE_LOC(xprt, victim->cache_xid);
- victim->cache_next = uc->uc_entries[loc];
- uc->uc_entries[loc] = victim;
- uc->uc_fifo[uc->uc_nextvictim++] = victim;
- uc->uc_nextvictim %= uc->uc_size;
-}
-
-/*
- * Try to get an entry from the cache
- * return 1 if found, 0 if not found
- */
-static int cache_get(SVCXPRT* xprt, struct rpc_msg* msg, char** replyp, u_long* replylenp)
-{
- u_int loc;
- register cache_ptr ent;
- register struct svcudp_data *su = su_data(xprt);
- register struct udp_cache *uc = (struct udp_cache *) su->su_cache;
-
-# define EQADDR(a1, a2) (bcmp((char*)&a1, (char*)&a2, sizeof(a1)) == 0)
-
- loc = CACHE_LOC(xprt, su->su_xid);
- for (ent = uc->uc_entries[loc]; ent != NULL; ent = ent->cache_next) {
- if (ent->cache_xid == su->su_xid &&
- ent->cache_proc == uc->uc_proc &&
- ent->cache_vers == uc->uc_vers &&
- ent->cache_prog == uc->uc_prog &&
- EQADDR(ent->cache_addr, uc->uc_addr)) {
- *replyp = ent->cache_reply;
- *replylenp = ent->cache_replylen;
- return (1);
- }
- }
- /*
- * Failed to find entry
- * Remember a few things so we can do a set later
- */
- uc->uc_proc = msg->rm_call.cb_proc;
- uc->uc_vers = msg->rm_call.cb_vers;
- uc->uc_prog = msg->rm_call.cb_prog;
- uc->uc_addr = xprt->xp_raddr;
- return (0);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr.c b/mdk-stage1/dietlibc/librpc/xdr.c
deleted file mode 100644
index 864b47dea..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/* @(#)xdr.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)xdr.c 1.35 87/08/12";
-#endif
-
-/*
- * xdr.c, Generic XDR routines implementation.
- *
- * Copyright (C) 1986, Sun Microsystems, Inc.
- *
- * These are the "generic" xdr routines used to serialize and de-serialize
- * most common data items. See xdr.h for more info on the interface to
- * xdr.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <string.h>
-
-/*
- * constants specific to the xdr "protocol"
- */
-#define XDR_FALSE ((long) 0)
-#define XDR_TRUE ((long) 1)
-#define LASTUNSIGNED ((u_int) 0-1)
-
-/*
- * for unit alignment
- */
-static char xdr_zero[BYTES_PER_XDR_UNIT] = { 0, 0, 0, 0 };
-
-/*
- * Free a data structure using XDR
- * Not a filter, but a convenient utility nonetheless
- */
-void xdr_free(xdrproc_t proc, char* objp)
-{
- XDR x;
-
- x.x_op = XDR_FREE;
- (*proc) (&x, objp);
-}
-
-/*
- * XDR nothing
- */
-bool_t xdr_void( /* xdrs, addr */ )
- /* XDR *xdrs; */
- /* caddr_t addr; */
-{
-
- return (TRUE);
-}
-
-/*
- * XDR integers
- */
-bool_t xdr_int(XDR* xdrs, int* ip)
-{
-
-#ifdef lint
- (void) (xdr_short(xdrs, (short *) ip));
- return (xdr_long(xdrs, (long *) ip));
-#else
- if (sizeof(int) == sizeof(long)) {
- return (xdr_long(xdrs, (long *) ip));
- } else {
- return (xdr_short(xdrs, (short *) ip));
- }
-#endif
-}
-
-/*
- * XDR unsigned integers
- */
-bool_t xdr_u_int(XDR* xdrs, unsigned int* up)
-{
-
-#ifdef lint
- (void) (xdr_short(xdrs, (short *) up));
- return (xdr_u_long(xdrs, (u_long *) up));
-#else
- if (sizeof(u_int) == sizeof(u_long)) {
- return (xdr_u_long(xdrs, (u_long *) up));
- } else {
- return (xdr_short(xdrs, (short *) up));
- }
-#endif
-}
-
-/*
- * XDR long integers
- * same as xdr_u_long - open coded to save a proc call!
- */
-bool_t xdr_long(XDR* xdrs, long* lp)
-{
-
- if (xdrs->x_op == XDR_ENCODE)
- return (XDR_PUTLONG(xdrs, lp));
-
- if (xdrs->x_op == XDR_DECODE)
- return (XDR_GETLONG(xdrs, lp));
-
- if (xdrs->x_op == XDR_FREE)
- return (TRUE);
-
- return (FALSE);
-}
-
-/*
- * XDR unsigned long integers
- * same as xdr_long - open coded to save a proc call!
- */
-bool_t xdr_u_long(XDR* xdrs, unsigned long* ulp)
-{
-
- if (xdrs->x_op == XDR_DECODE)
- return (XDR_GETLONG(xdrs, (long *) ulp));
- if (xdrs->x_op == XDR_ENCODE)
- return (XDR_PUTLONG(xdrs, (long *) ulp));
- if (xdrs->x_op == XDR_FREE)
- return (TRUE);
- return (FALSE);
-}
-
-/*
- * XDR short integers
- */
-bool_t xdr_short(XDR* xdrs, short* sp)
-{
- long l;
-
- switch (xdrs->x_op) {
-
- case XDR_ENCODE:
- l = (long) *sp;
- return (XDR_PUTLONG(xdrs, &l));
-
- case XDR_DECODE:
- if (!XDR_GETLONG(xdrs, &l)) {
- return (FALSE);
- }
- *sp = (short) l;
- return (TRUE);
-
- case XDR_FREE:
- return (TRUE);
- }
- return (FALSE);
-}
-
-/*
- * XDR unsigned short integers
- */
-bool_t xdr_u_short(XDR* xdrs, unsigned short* usp)
-{
- u_long l;
-
- switch (xdrs->x_op) {
-
- case XDR_ENCODE:
- l = (u_long) * usp;
- return (XDR_PUTLONG(xdrs, &l));
-
- case XDR_DECODE:
- if (!XDR_GETLONG(xdrs, &l)) {
- return (FALSE);
- }
- *usp = (u_short) l;
- return (TRUE);
-
- case XDR_FREE:
- return (TRUE);
- }
- return (FALSE);
-}
-
-
-/*
- * XDR a char
- */
-bool_t xdr_char(XDR* xdrs, char* cp)
-{
- int i;
-
- i = (*cp);
- if (!xdr_int(xdrs, &i)) {
- return (FALSE);
- }
- *cp = i;
- return (TRUE);
-}
-
-/*
- * XDR an unsigned char
- */
-bool_t xdr_u_char(XDR* xdrs, unsigned char* cp)
-{
- u_int u;
-
- u = (*cp);
- if (!xdr_u_int(xdrs, &u)) {
- return (FALSE);
- }
- *cp = u;
- return (TRUE);
-}
-
-/*
- * XDR booleans
- */
-bool_t xdr_bool(xdrs, bp)
-register XDR *xdrs;
-bool_t *bp;
-{
- long lb;
-
- switch (xdrs->x_op) {
-
- case XDR_ENCODE:
- lb = *bp ? XDR_TRUE : XDR_FALSE;
- return (XDR_PUTLONG(xdrs, &lb));
-
- case XDR_DECODE:
- if (!XDR_GETLONG(xdrs, &lb)) {
- return (FALSE);
- }
- *bp = (lb == XDR_FALSE) ? FALSE : TRUE;
- return (TRUE);
-
- case XDR_FREE:
- return (TRUE);
- }
- return (FALSE);
-}
-
-/*
- * XDR enumerations
- */
-bool_t xdr_enum(xdrs, ep)
-XDR *xdrs;
-enum_t *ep;
-{
-#ifndef lint
- enum sizecheck { SIZEVAL }; /* used to find the size of an enum */
-
- /*
- * enums are treated as ints
- */
- if (sizeof(enum sizecheck) == sizeof(long)) {
- return (xdr_long(xdrs, (long *) ep));
- } else if (sizeof(enum sizecheck) == sizeof(short)) {
- return (xdr_short(xdrs, (short *) ep));
- } else {
- return (FALSE);
- }
-#else
- (void) (xdr_short(xdrs, (short *) ep));
- return (xdr_long(xdrs, (long *) ep));
-#endif
-}
-
-/*
- * XDR opaque data
- * Allows the specification of a fixed size sequence of opaque bytes.
- * cp points to the opaque object and cnt gives the byte length.
- */
-bool_t xdr_opaque(xdrs, cp, cnt)
-register XDR *xdrs;
-caddr_t cp;
-register u_int cnt;
-{
- register u_int rndup;
- static char crud[BYTES_PER_XDR_UNIT];
-
- /*
- * if no data we are done
- */
- if (cnt == 0)
- return (TRUE);
-
- /*
- * round byte count to full xdr units
- */
- rndup = cnt % BYTES_PER_XDR_UNIT;
- if (rndup > 0)
- rndup = BYTES_PER_XDR_UNIT - rndup;
-
- if (xdrs->x_op == XDR_DECODE) {
- if (!XDR_GETBYTES(xdrs, cp, cnt)) {
- return (FALSE);
- }
- if (rndup == 0)
- return (TRUE);
- return (XDR_GETBYTES(xdrs, crud, rndup));
- }
-
- if (xdrs->x_op == XDR_ENCODE) {
- if (!XDR_PUTBYTES(xdrs, cp, cnt)) {
- return (FALSE);
- }
- if (rndup == 0)
- return (TRUE);
- return (XDR_PUTBYTES(xdrs, xdr_zero, rndup));
- }
-
- if (xdrs->x_op == XDR_FREE) {
- return (TRUE);
- }
-
- return (FALSE);
-}
-
-/*
- * XDR counted bytes
- * *cpp is a pointer to the bytes, *sizep is the count.
- * If *cpp is NULL maxsize bytes are allocated
- */
-bool_t xdr_bytes(xdrs, cpp, sizep, maxsize)
-register XDR *xdrs;
-char **cpp;
-register u_int *sizep;
-u_int maxsize;
-{
- register char *sp = *cpp; /* sp is the actual string pointer */
- register u_int nodesize;
-
- /*
- * first deal with the length since xdr bytes are counted
- */
- if (!xdr_u_int(xdrs, sizep)) {
- return (FALSE);
- }
- nodesize = *sizep;
- if ((nodesize > maxsize) && (xdrs->x_op != XDR_FREE)) {
- return (FALSE);
- }
-
- /*
- * now deal with the actual bytes
- */
- switch (xdrs->x_op) {
-
- case XDR_DECODE:
- if (nodesize == 0) {
- return (TRUE);
- }
- if (sp == NULL) {
- *cpp = sp = (char *) mem_alloc(nodesize);
- }
- if (sp == NULL) {
- (void) fprintf(stderr, "xdr_bytes: out of memory\n");
- return (FALSE);
- }
- /* fall into ... */
-
- case XDR_ENCODE:
- return (xdr_opaque(xdrs, sp, nodesize));
-
- case XDR_FREE:
- if (sp != NULL) {
- mem_free(sp, nodesize);
- *cpp = NULL;
- }
- return (TRUE);
- }
- return (FALSE);
-}
-
-/*
- * Implemented here due to commonality of the object.
- */
-bool_t xdr_netobj(xdrs, np)
-XDR *xdrs;
-struct netobj *np;
-{
-
- return (xdr_bytes(xdrs, &np->n_bytes, &np->n_len, MAX_NETOBJ_SZ));
-}
-
-/*
- * XDR a descriminated union
- * Support routine for discriminated unions.
- * You create an array of xdrdiscrim structures, terminated with
- * an entry with a null procedure pointer. The routine gets
- * the discriminant value and then searches the array of xdrdiscrims
- * looking for that value. It calls the procedure given in the xdrdiscrim
- * to handle the discriminant. If there is no specific routine a default
- * routine may be called.
- * If there is no specific or default routine an error is returned.
- */
-bool_t xdr_union(XDR* xdrs, enum_t* dscmp, char* unp, const struct xdr_discrim* choices, xdrproc_t dfault)
-{
- register enum_t dscm;
-
- /*
- * we deal with the discriminator; it's an enum
- */
- if (!xdr_enum(xdrs, dscmp)) {
- return (FALSE);
- }
- dscm = *dscmp;
-
- /*
- * search choices for a value that matches the discriminator.
- * if we find one, execute the xdr routine for that value.
- */
- for (; choices->proc != NULL_xdrproc_t; choices++) {
- if (choices->value == dscm)
- return ((*(choices->proc)) (xdrs, unp, LASTUNSIGNED));
- }
-
- /*
- * no match - execute the default xdr routine if there is one
- */
- return ((dfault == NULL_xdrproc_t) ? FALSE :
- (*dfault) (xdrs, unp, LASTUNSIGNED));
-}
-
-
-/*
- * Non-portable xdr primitives.
- * Care should be taken when moving these routines to new architectures.
- */
-
-
-/*
- * XDR null terminated ASCII strings
- * xdr_string deals with "C strings" - arrays of bytes that are
- * terminated by a NULL character. The parameter cpp references a
- * pointer to storage; If the pointer is null, then the necessary
- * storage is allocated. The last parameter is the max allowed length
- * of the string as specified by a protocol.
- */
-bool_t xdr_string(xdrs, cpp, maxsize)
-register XDR *xdrs;
-char **cpp;
-u_int maxsize;
-{
- register char *sp = *cpp; /* sp is the actual string pointer */
- u_int size;
- u_int nodesize;
-
- /*
- * first deal with the length since xdr strings are counted-strings
- */
- switch (xdrs->x_op) {
- case XDR_FREE:
- if (sp == NULL) {
- return (TRUE); /* already free */
- }
- /* fall through... */
- case XDR_ENCODE:
- size = strlen(sp);
- break;
- }
- if (!xdr_u_int(xdrs, &size)) {
- return (FALSE);
- }
- if (size > maxsize) {
- return (FALSE);
- }
- nodesize = size + 1;
-
- /*
- * now deal with the actual bytes
- */
- switch (xdrs->x_op) {
-
- case XDR_DECODE:
- if (nodesize == 0) {
- return (TRUE);
- }
- if (sp == NULL)
- *cpp = sp = (char *) mem_alloc(nodesize);
- if (sp == NULL) {
- (void) fprintf(stderr, "xdr_string: out of memory\n");
- return (FALSE);
- }
- sp[size] = 0;
- /* fall into ... */
-
- case XDR_ENCODE:
- return (xdr_opaque(xdrs, sp, size));
-
- case XDR_FREE:
- mem_free(sp, nodesize);
- *cpp = NULL;
- return (TRUE);
- }
- return (FALSE);
-}
-
-/*
- * Wrapper for xdr_string that can be called directly from
- * routines like clnt_call
- */
-bool_t xdr_wrapstring(xdrs, cpp)
-XDR *xdrs;
-char **cpp;
-{
- if (xdr_string(xdrs, cpp, LASTUNSIGNED)) {
- return (TRUE);
- }
- return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_array.c b/mdk-stage1/dietlibc/librpc/xdr_array.c
deleted file mode 100644
index f8ae12b19..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_array.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* @(#)xdr_array.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)xdr_array.c 1.10 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_array.c, Generic XDR routines impelmentation.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * These are the "non-trivial" xdr primitives used to serialize and de-serialize
- * arrays. See xdr.h for more info on the interface to xdr.
- */
-
-#include <stdio.h>
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <string.h>
-
-#define LASTUNSIGNED ((u_int)0-1)
-
-
-/*
- * XDR an array of arbitrary elements
- * *addrp is a pointer to the array, *sizep is the number of elements.
- * If addrp is NULL (*sizep * elsize) bytes are allocated.
- * elsize is the size (in bytes) of each element, and elproc is the
- * xdr procedure to call to handle each element of the array.
- */
-bool_t xdr_array(xdrs, addrp, sizep, maxsize, elsize, elproc)
-register XDR *xdrs;
-caddr_t *addrp; /* array pointer */
-u_int *sizep; /* number of elements */
-u_int maxsize; /* max numberof elements */
-u_int elsize; /* size in bytes of each element */
-xdrproc_t elproc; /* xdr routine to handle each element */
-{
- register u_int i;
- register caddr_t target = *addrp;
- register u_int c; /* the actual element count */
- register bool_t stat = TRUE;
- register u_int nodesize;
-
- /* like strings, arrays are really counted arrays */
- if (!xdr_u_int(xdrs, sizep)) {
- return (FALSE);
- }
- c = *sizep;
- if ((c > maxsize) && (xdrs->x_op != XDR_FREE)) {
- return (FALSE);
- }
- nodesize = c * elsize;
-
- /*
- * if we are deserializing, we may need to allocate an array.
- * We also save time by checking for a null array if we are freeing.
- */
- if (target == NULL)
- switch (xdrs->x_op) {
- case XDR_DECODE:
- if (c == 0)
- return (TRUE);
- *addrp = target = mem_alloc(nodesize);
- if (target == NULL) {
- (void) fprintf(stderr, "xdr_array: out of memory\n");
- return (FALSE);
- }
- bzero(target, nodesize);
- break;
-
- case XDR_FREE:
- return (TRUE);
- }
-
- /*
- * now we xdr each element of array
- */
- for (i = 0; (i < c) && stat; i++) {
- stat = (*elproc) (xdrs, target, LASTUNSIGNED);
- target += elsize;
- }
-
- /*
- * the array may need freeing
- */
- if (xdrs->x_op == XDR_FREE) {
- mem_free(*addrp, nodesize);
- *addrp = NULL;
- }
- return (stat);
-}
-
-/*
- * xdr_vector():
- *
- * XDR a fixed length array. Unlike variable-length arrays,
- * the storage of fixed length arrays is static and unfreeable.
- * > basep: base of the array
- * > size: size of the array
- * > elemsize: size of each element
- * > xdr_elem: routine to XDR each element
- */
-bool_t xdr_vector(xdrs, basep, nelem, elemsize, xdr_elem)
-register XDR *xdrs;
-register char *basep;
-register u_int nelem;
-register u_int elemsize;
-register xdrproc_t xdr_elem;
-{
- register u_int i;
- register char *elptr;
-
- elptr = basep;
- for (i = 0; i < nelem; i++) {
- if (!(*xdr_elem) (xdrs, elptr, LASTUNSIGNED)) {
- return (FALSE);
- }
- elptr += elemsize;
- }
- return (TRUE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_float.c b/mdk-stage1/dietlibc/librpc/xdr_float.c
deleted file mode 100644
index f8eb5e99c..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_float.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/* @(#)xdr_float.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)xdr_float.c 1.12 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_float.c, Generic XDR routines impelmentation.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * These are the "floating point" xdr routines used to (de)serialize
- * most common data items. See xdr.h for more info on the interface to
- * xdr.
- */
-
-#include <stdio.h>
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-
-/*
- * NB: Not portable.
- * This routine works on Suns (Sky / 68000's) and Vaxen.
- */
-
-#ifdef __linux__
-/* cheat big time */
-#define sparc
-#endif
-
-#ifdef vax
-
-/* What IEEE single precision floating point looks like on a Vax */
-struct ieee_single {
- unsigned int mantissa:23;
- unsigned int exp:8;
- unsigned int sign:1;
-};
-
-/* Vax single precision floating point */
-struct vax_single {
- unsigned int mantissa1:7;
- unsigned int exp:8;
- unsigned int sign:1;
- unsigned int mantissa2:16;
-};
-
-#define VAX_SNG_BIAS 0x81
-#define IEEE_SNG_BIAS 0x7f
-
-static struct sgl_limits {
- struct vax_single s;
- struct ieee_single ieee;
-} sgl_limits[2] = {
- { {
- 0x7f, 0xff, 0x0, 0xffff}, /* Max Vax */
- {
- 0x0, 0xff, 0x0}}, /* Max IEEE */
- { {
- 0x0, 0x0, 0x0, 0x0}, /* Min Vax */
- {
- 0x0, 0x0, 0x0}} /* Min IEEE */
-};
-#endif /* vax */
-
-bool_t xdr_float(xdrs, fp)
-register XDR *xdrs;
-register float *fp;
-{
-#if !defined(mc68000) && !defined(sparc)
- struct ieee_single is;
- struct vax_single vs, *vsp;
- struct sgl_limits *lim;
- int i;
-#endif
- switch (xdrs->x_op) {
-
- case XDR_ENCODE:
-#if defined(mc68000) || defined(sparc)
- return (XDR_PUTLONG(xdrs, (long *) fp));
-#else
- vs = *((struct vax_single *) fp);
- for (i = 0, lim = sgl_limits;
-
- i < sizeof(sgl_limits) / sizeof(struct sgl_limits);
- i++, lim++) {
- if ((vs.mantissa2 == lim->s.mantissa2) &&
- (vs.exp == lim->s.exp) &&
- (vs.mantissa1 == lim->s.mantissa1)) {
- is = lim->ieee;
- goto shipit;
- }
- }
- is.exp = vs.exp - VAX_SNG_BIAS + IEEE_SNG_BIAS;
- is.mantissa = (vs.mantissa1 << 16) | vs.mantissa2;
- shipit:
- is.sign = vs.sign;
- return (XDR_PUTLONG(xdrs, (long *) &is));
-#endif
-
- case XDR_DECODE:
-#if defined(mc68000) || defined(sparc)
- return (XDR_GETLONG(xdrs, (long *) fp));
-#else
- vsp = (struct vax_single *) fp;
- if (!XDR_GETLONG(xdrs, (long *) &is))
- return (FALSE);
- for (i = 0, lim = sgl_limits;
-
- i < sizeof(sgl_limits) / sizeof(struct sgl_limits);
- i++, lim++) {
- if ((is.exp == lim->ieee.exp) &&
- (is.mantissa == lim->ieee.mantissa)) {
- *vsp = lim->s;
- goto doneit;
- }
- }
- vsp->exp = is.exp - IEEE_SNG_BIAS + VAX_SNG_BIAS;
- vsp->mantissa2 = is.mantissa;
- vsp->mantissa1 = (is.mantissa >> 16);
- doneit:
- vsp->sign = is.sign;
- return (TRUE);
-#endif
-
- case XDR_FREE:
- return (TRUE);
- }
- return (FALSE);
-}
-
-/*
- * This routine works on Suns (Sky / 68000's) and Vaxen.
- */
-
-#ifdef vax
-/* What IEEE double precision floating point looks like on a Vax */
-struct ieee_double {
- unsigned int mantissa1:20;
- unsigned int exp:11;
- unsigned int sign:1;
- unsigned int mantissa2:32;
-};
-
-/* Vax double precision floating point */
-struct vax_double {
- unsigned int mantissa1:7;
- unsigned int exp:8;
- unsigned int sign:1;
- unsigned int mantissa2:16;
- unsigned int mantissa3:16;
- unsigned int mantissa4:16;
-};
-
-#define VAX_DBL_BIAS 0x81
-#define IEEE_DBL_BIAS 0x3ff
-#define MASK(nbits) ((1 << nbits) - 1)
-
-static struct dbl_limits {
- struct vax_double d;
- struct ieee_double ieee;
-} dbl_limits[2] = {
- { {
- 0x7f, 0xff, 0x0, 0xffff, 0xffff, 0xffff}, /* Max Vax */
- {
- 0x0, 0x7ff, 0x0, 0x0}}, /* Max IEEE */
- { {
- 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, /* Min Vax */
- {
- 0x0, 0x0, 0x0, 0x0}} /* Min IEEE */
-};
-
-#endif /* vax */
-
-
-bool_t xdr_double(xdrs, dp)
-register XDR *xdrs;
-double *dp;
-{
- register long *lp;
-
-#if !defined(mc68000) && !defined(sparc)
- struct ieee_double id;
- struct vax_double vd;
- register struct dbl_limits *lim;
- int i;
-#endif
-
- switch (xdrs->x_op) {
-
- case XDR_ENCODE:
-#if defined(mc68000) || defined(sparc)
- lp = (long *) dp;
-#else
- vd = *((struct vax_double *) dp);
- for (i = 0, lim = dbl_limits;
-
- i < sizeof(dbl_limits) / sizeof(struct dbl_limits);
- i++, lim++) {
- if ((vd.mantissa4 == lim->d.mantissa4) &&
- (vd.mantissa3 == lim->d.mantissa3) &&
- (vd.mantissa2 == lim->d.mantissa2) &&
- (vd.mantissa1 == lim->d.mantissa1) &&
- (vd.exp == lim->d.exp)) {
- id = lim->ieee;
- goto shipit;
- }
- }
- id.exp = vd.exp - VAX_DBL_BIAS + IEEE_DBL_BIAS;
- id.mantissa1 = (vd.mantissa1 << 13) | (vd.mantissa2 >> 3);
- id.mantissa2 = ((vd.mantissa2 & MASK(3)) << 29) |
- (vd.mantissa3 << 13) | ((vd.mantissa4 >> 3) & MASK(13));
- shipit:
- id.sign = vd.sign;
- lp = (long *) &id;
-#endif
- return (XDR_PUTLONG(xdrs, lp++) && XDR_PUTLONG(xdrs, lp));
-
- case XDR_DECODE:
-#if defined(mc68000) || defined(sparc)
- lp = (long *) dp;
- return (XDR_GETLONG(xdrs, lp++) && XDR_GETLONG(xdrs, lp));
-#else
- lp = (long *) &id;
- if (!XDR_GETLONG(xdrs, lp++) || !XDR_GETLONG(xdrs, lp))
- return (FALSE);
- for (i = 0, lim = dbl_limits;
-
- i < sizeof(dbl_limits) / sizeof(struct dbl_limits);
- i++, lim++) {
- if ((id.mantissa2 == lim->ieee.mantissa2) &&
- (id.mantissa1 == lim->ieee.mantissa1) &&
- (id.exp == lim->ieee.exp)) {
- vd = lim->d;
- goto doneit;
- }
- }
- vd.exp = id.exp - IEEE_DBL_BIAS + VAX_DBL_BIAS;
- vd.mantissa1 = (id.mantissa1 >> 13);
- vd.mantissa2 = ((id.mantissa1 & MASK(13)) << 3) |
- (id.mantissa2 >> 29);
- vd.mantissa3 = (id.mantissa2 >> 13);
- vd.mantissa4 = (id.mantissa2 << 3);
- doneit:
- vd.sign = id.sign;
- *dp = *((double *) &vd);
- return (TRUE);
-#endif
-
- case XDR_FREE:
- return (TRUE);
- }
- return (FALSE);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_mem.c b/mdk-stage1/dietlibc/librpc/xdr_mem.c
deleted file mode 100644
index 755f6abf1..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_mem.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/* @(#)xdr_mem.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)xdr_mem.c 1.19 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_mem.h, XDR implementation using memory buffers.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * If you have some data to be interpreted as external data representation
- * or to be converted to external data representation in a memory buffer,
- * then this is the package for you.
- *
- */
-
-
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <netinet/in.h>
-#include <string.h>
-
-static bool_t xdrmem_getlong();
-static bool_t xdrmem_putlong();
-static bool_t xdrmem_getbytes();
-static bool_t xdrmem_putbytes();
-static u_int xdrmem_getpos();
-static bool_t xdrmem_setpos();
-static int32_t *xdrmem_inline();
-static void xdrmem_destroy();
-
-static struct xdr_ops xdrmem_ops = {
- xdrmem_getlong,
- xdrmem_putlong,
- xdrmem_getbytes,
- xdrmem_putbytes,
- xdrmem_getpos,
- xdrmem_setpos,
- xdrmem_inline,
- xdrmem_destroy
-};
-
-/*
- * The procedure xdrmem_create initializes a stream descriptor for a
- * memory buffer.
- */
-void xdrmem_create(xdrs, addr, size, op)
-register XDR *xdrs;
-caddr_t addr;
-u_int size;
-enum xdr_op op;
-{
-
- xdrs->x_op = op;
- xdrs->x_ops = &xdrmem_ops;
- xdrs->x_private = xdrs->x_base = addr;
- xdrs->x_handy = size;
-}
-
-static void xdrmem_destroy( /*xdrs */ )
- /*XDR *xdrs; */
-{
-}
-
-static bool_t xdrmem_getlong(xdrs, lp)
-register XDR *xdrs;
-long *lp;
-{
-
- if ((xdrs->x_handy -= sizeof(long)) < 0)
- return (FALSE);
-
- *lp = (long) ntohl((u_long) (*((long *) (xdrs->x_private))));
- xdrs->x_private += sizeof(long);
-
- return (TRUE);
-}
-
-static bool_t xdrmem_putlong(xdrs, lp)
-register XDR *xdrs;
-long *lp;
-{
-
- if ((xdrs->x_handy -= sizeof(long)) < 0)
- return (FALSE);
-
- *(long *) xdrs->x_private = (long) htonl((u_long) (*lp));
- xdrs->x_private += sizeof(long);
-
- return (TRUE);
-}
-
-static bool_t xdrmem_getbytes(xdrs, addr, len)
-register XDR *xdrs;
-caddr_t addr;
-register u_int len;
-{
-
- if ((xdrs->x_handy -= len) < 0)
- return (FALSE);
- bcopy(xdrs->x_private, addr, len);
- xdrs->x_private += len;
- return (TRUE);
-}
-
-static bool_t xdrmem_putbytes(xdrs, addr, len)
-register XDR *xdrs;
-caddr_t addr;
-register u_int len;
-{
-
- if ((xdrs->x_handy -= len) < 0)
- return (FALSE);
- bcopy(addr, xdrs->x_private, len);
- xdrs->x_private += len;
- return (TRUE);
-}
-
-static u_int xdrmem_getpos(xdrs)
-register XDR *xdrs;
-{
-
- return ((u_int) xdrs->x_private - (u_int) xdrs->x_base);
-}
-
-static bool_t xdrmem_setpos(xdrs, pos)
-register XDR *xdrs;
-u_int pos;
-{
- register caddr_t newaddr = xdrs->x_base + pos;
- register caddr_t lastaddr = xdrs->x_private + xdrs->x_handy;
-
- if ((long) newaddr > (long) lastaddr)
- return (FALSE);
- xdrs->x_private = newaddr;
- xdrs->x_handy = (int) lastaddr - (int) newaddr;
- return (TRUE);
-}
-
-static int32_t *xdrmem_inline(xdrs, len)
-register XDR *xdrs;
-int len;
-{
- int32_t *buf = 0;
-
- if (xdrs->x_handy >= len) {
- xdrs->x_handy -= len;
- buf = (int32_t *) xdrs->x_private;
- xdrs->x_private += len;
- }
- return (buf);
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_rec.c b/mdk-stage1/dietlibc/librpc/xdr_rec.c
deleted file mode 100644
index 83e800f5e..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_rec.c
+++ /dev/null
@@ -1,573 +0,0 @@
-/* @(#)xdr_rec.c 2.2 88/08/01 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)xdr_rec.c 1.21 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_rec.c, Implements TCP/IP based XDR streams with a "record marking"
- * layer above tcp (for rpc's use).
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * These routines interface XDRSTREAMS to a tcp/ip connection.
- * There is a record marking layer between the xdr stream
- * and the tcp transport level. A record is composed on one or more
- * record fragments. A record fragment is a thirty-two bit header followed
- * by n bytes of data, where n is contained in the header. The header
- * is represented as a htonl(u_long). Thegh order bit encodes
- * whether or not the fragment is the last fragment of the record
- * (1 => fragment is last, 0 => more fragments to follow.
- * The other 31 bits encode the byte length of the fragment.
- */
-
-#include <stdio.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <netinet/in.h>
-#include <string.h>
-
-extern long lseek();
-
-static u_int fix_buf_size();
-
-static bool_t xdrrec_getlong();
-static bool_t xdrrec_putlong();
-static bool_t xdrrec_getbytes();
-static bool_t xdrrec_putbytes();
-static u_int xdrrec_getpos();
-static bool_t xdrrec_setpos();
-static int32_t *xdrrec_inline();
-static void xdrrec_destroy();
-
-static struct xdr_ops xdrrec_ops = {
- xdrrec_getlong,
- xdrrec_putlong,
- xdrrec_getbytes,
- xdrrec_putbytes,
- xdrrec_getpos,
- xdrrec_setpos,
- xdrrec_inline,
- xdrrec_destroy
-};
-
-/*
- * A record is composed of one or more record fragments.
- * A record fragment is a two-byte header followed by zero to
- * 2**32-1 bytes. The header is treated as a long unsigned and is
- * encode/decoded to the network via htonl/ntohl. The low order 31 bits
- * are a byte count of the fragment. The highest order bit is a boolean:
- * 1 => this fragment is the last fragment of the record,
- * 0 => this fragment is followed by more fragment(s).
- *
- * The fragment/record machinery is not general; it is constructed to
- * meet the needs of xdr and rpc based on tcp.
- */
-
-#define LAST_FRAG ((u_long)(1 << 31))
-
-typedef struct rec_strm {
- caddr_t tcp_handle;
- caddr_t the_buffer;
- /*
- * out-goung bits
- */
- int (*writeit) ();
- caddr_t out_base; /* output buffer (points to frag header) */
- caddr_t out_finger; /* next output position */
- caddr_t out_boundry; /* data cannot up to this address */
- u_long *frag_header; /* beginning of curren fragment */
- bool_t frag_sent; /* true if buffer sent in middle of record */
- /*
- * in-coming bits
- */
- int (*readit) ();
- u_long in_size; /* fixed size of the input buffer */
- caddr_t in_base;
- caddr_t in_finger; /* location of next byte to be had */
- caddr_t in_boundry; /* can read up to this location */
- long fbtbc; /* fragment bytes to be consumed */
- bool_t last_frag;
- u_int sendsize;
- u_int recvsize;
-} RECSTREAM;
-
-
-/*
- * Create an xdr handle for xdrrec
- * xdrrec_create fills in xdrs. Sendsize and recvsize are
- * send and recv buffer sizes (0 => use default).
- * tcp_handle is an opaque handle that is passed as the first parameter to
- * the procedures readit and writeit. Readit and writeit are read and
- * write respectively. They are like the system
- * calls expect that they take an opaque handle rather than an fd.
- */
-void xdrrec_create(xdrs, sendsize, recvsize, tcp_handle, readit, writeit)
-register XDR *xdrs;
-register u_int sendsize;
-register u_int recvsize;
-caddr_t tcp_handle;
-int (*readit) (); /* like read, but pass it a tcp_handle, not sock */
-int (*writeit) (); /* like write, but pass it a tcp_handle, not sock */
-{
- register RECSTREAM *rstrm = (RECSTREAM *) mem_alloc(sizeof(RECSTREAM));
-
- if (rstrm == NULL) {
- (void) fprintf(stderr, "xdrrec_create: out of memory\n");
- /*
- * This is bad. Should rework xdrrec_create to
- * return a handle, and in this case return NULL
- */
- return;
- }
- /*
- * adjust sizes and allocate buffer quad byte aligned
- */
- rstrm->sendsize = sendsize = fix_buf_size(sendsize);
- rstrm->recvsize = recvsize = fix_buf_size(recvsize);
- rstrm->the_buffer =
- mem_alloc(sendsize + recvsize + BYTES_PER_XDR_UNIT);
- if (rstrm->the_buffer == NULL) {
- (void) fprintf(stderr, "xdrrec_create: out of memory\n");
- return;
- }
- for (rstrm->out_base = rstrm->the_buffer;
- (u_int) rstrm->out_base % BYTES_PER_XDR_UNIT != 0;
- rstrm->out_base++);
- rstrm->in_base = rstrm->out_base + sendsize;
- /*
- * now the rest ...
- */
- xdrs->x_ops = &xdrrec_ops;
- xdrs->x_private = (caddr_t) rstrm;
- rstrm->tcp_handle = tcp_handle;
- rstrm->readit = readit;
- rstrm->writeit = writeit;
- rstrm->out_finger = rstrm->out_boundry = rstrm->out_base;
- rstrm->frag_header = (u_long *) rstrm->out_base;
- rstrm->out_finger += sizeof(u_long);
- rstrm->out_boundry += sendsize;
- rstrm->frag_sent = FALSE;
- rstrm->in_size = recvsize;
- rstrm->in_boundry = rstrm->in_base;
- rstrm->in_finger = (rstrm->in_boundry += recvsize);
- rstrm->fbtbc = 0;
- rstrm->last_frag = TRUE;
-}
-
-
-/*
- * The reoutines defined below are the xdr ops which will go into the
- * xdr handle filled in by xdrrec_create.
- */
-
-static bool_t xdrrec_getlong(xdrs, lp)
-XDR *xdrs;
-long *lp;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
- register long *buflp = (long *) (rstrm->in_finger);
- long mylong;
-
- /* first try the inline, fast case */
- if ((rstrm->fbtbc >= sizeof(long)) &&
- (((int) rstrm->in_boundry - (int) buflp) >= sizeof(long))) {
- *lp = (long) ntohl((u_long) (*buflp));
- rstrm->fbtbc -= sizeof(long);
- rstrm->in_finger += sizeof(long);
- } else {
- if (!xdrrec_getbytes(xdrs, (caddr_t) & mylong, sizeof(long)))
- return (FALSE);
-
- *lp = (long) ntohl((u_long) mylong);
- }
- return (TRUE);
-}
-
-/*
- * Internal useful routines
- */
-static bool_t flush_out(RECSTREAM* rstrm, bool_t eor)
-{
- register u_long eormask = (eor == TRUE) ? LAST_FRAG : 0;
- register u_long len = (u_long) (rstrm->out_finger) -
- (u_long) (rstrm->frag_header) - sizeof(u_long);
-
- *(rstrm->frag_header) = htonl(len | eormask);
- len = (u_long) (rstrm->out_finger) - (u_long) (rstrm->out_base);
- if ((*(rstrm->writeit)) (rstrm->tcp_handle, rstrm->out_base, (int) len)
- != (int) len)
- return (FALSE);
- rstrm->frag_header = (u_long *) rstrm->out_base;
- rstrm->out_finger = (caddr_t) rstrm->out_base + sizeof(u_long);
- return (TRUE);
-}
-
-static bool_t
-/* knows nothing about records! Only about input buffers */
-fill_input_buf(rstrm)
-register RECSTREAM *rstrm;
-{
- register caddr_t where;
- u_int i;
- register int len;
-
- where = rstrm->in_base;
- i = (u_int) rstrm->in_boundry % BYTES_PER_XDR_UNIT;
- where += i;
- len = rstrm->in_size - i;
- if ((len = (*(rstrm->readit)) (rstrm->tcp_handle, where, len)) == -1)
- return (FALSE);
- rstrm->in_finger = where;
- where += len;
- rstrm->in_boundry = where;
- return (TRUE);
-}
-
-static bool_t
-/* knows nothing about records! Only about input buffers */
-get_input_bytes(rstrm, addr, len)
-register RECSTREAM *rstrm;
-register caddr_t addr;
-register int len;
-{
- register int current;
-
- while (len > 0) {
- current = (int) rstrm->in_boundry - (int) rstrm->in_finger;
- if (current == 0) {
- if (!fill_input_buf(rstrm))
- return (FALSE);
- continue;
- }
- current = (len < current) ? len : current;
- bcopy(rstrm->in_finger, addr, current);
- rstrm->in_finger += current;
- addr += current;
- len -= current;
- }
- return (TRUE);
-}
-
-static bool_t
-/* next two bytes of the input stream are treated as a header */
-set_input_fragment(rstrm)
-register RECSTREAM *rstrm;
-{
- u_long header;
-
- if (!get_input_bytes(rstrm, (caddr_t) & header, sizeof(header)))
- return (FALSE);
- header = (long) ntohl(header);
- rstrm->last_frag = ((header & LAST_FRAG) == 0) ? FALSE : TRUE;
- rstrm->fbtbc = header & (~LAST_FRAG);
- return (TRUE);
-}
-
-static bool_t
-/* consumes input bytes; knows nothing about records! */
-skip_input_bytes(rstrm, cnt)
-register RECSTREAM *rstrm;
-long cnt;
-{
- register int current;
-
- while (cnt > 0) {
- current = (int) rstrm->in_boundry - (int) rstrm->in_finger;
- if (current == 0) {
- if (!fill_input_buf(rstrm))
- return (FALSE);
- continue;
- }
- current = (cnt < current) ? cnt : current;
- rstrm->in_finger += current;
- cnt -= current;
- }
- return (TRUE);
-}
-
-static u_int fix_buf_size(s)
-register u_int s;
-{
-
- if (s < 100)
- s = 4000;
- return (RNDUP(s));
-}
-static bool_t xdrrec_putlong(xdrs, lp)
-XDR *xdrs;
-long *lp;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
- register long *dest_lp = ((long *) (rstrm->out_finger));
-
- if ((rstrm->out_finger += sizeof(long)) > rstrm->out_boundry) {
- /*
- * this case should almost never happen so the code is
- * inefficient
- */
- rstrm->out_finger -= sizeof(long);
-
- rstrm->frag_sent = TRUE;
- if (!flush_out(rstrm, FALSE))
- return (FALSE);
- dest_lp = ((long *) (rstrm->out_finger));
- rstrm->out_finger += sizeof(long);
- }
- *dest_lp = (long) htonl((u_long) (*lp));
- return (TRUE);
-}
-
-static bool_t
-/* must manage buffers, fragments, and records */
-xdrrec_getbytes(xdrs, addr, len)
-XDR *xdrs;
-register caddr_t addr;
-register u_int len;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
- register int current;
-
- while (len > 0) {
- current = rstrm->fbtbc;
- if (current == 0) {
- if (rstrm->last_frag)
- return (FALSE);
- if (!set_input_fragment(rstrm))
- return (FALSE);
- continue;
- }
- current = (len < current) ? len : current;
- if (!get_input_bytes(rstrm, addr, current))
- return (FALSE);
- addr += current;
- rstrm->fbtbc -= current;
- len -= current;
- }
- return (TRUE);
-}
-
-static bool_t xdrrec_putbytes(xdrs, addr, len)
-XDR *xdrs;
-register caddr_t addr;
-register u_int len;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
- register int current;
-
- while (len > 0) {
- current = (u_int) rstrm->out_boundry - (u_int) rstrm->out_finger;
- current = (len < current) ? len : current;
- bcopy(addr, rstrm->out_finger, current);
- rstrm->out_finger += current;
- addr += current;
- len -= current;
- if (rstrm->out_finger == rstrm->out_boundry) {
- rstrm->frag_sent = TRUE;
- if (!flush_out(rstrm, FALSE))
- return (FALSE);
- }
- }
- return (TRUE);
-}
-
-static u_int xdrrec_getpos(xdrs)
-register XDR *xdrs;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) xdrs->x_private;
- register long pos;
-
- pos = lseek((int) rstrm->tcp_handle, (long) 0, 1);
- if (pos != -1)
- switch (xdrs->x_op) {
-
- case XDR_ENCODE:
- pos += rstrm->out_finger - rstrm->out_base;
- break;
-
- case XDR_DECODE:
- pos -= rstrm->in_boundry - rstrm->in_finger;
- break;
-
- default:
- pos = (u_int) - 1;
- break;
- }
- return ((u_int) pos);
-}
-
-static bool_t xdrrec_setpos(xdrs, pos)
-register XDR *xdrs;
-u_int pos;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) xdrs->x_private;
- u_int currpos = xdrrec_getpos(xdrs);
- int delta = currpos - pos;
- caddr_t newpos;
-
- if ((int) currpos != -1)
- switch (xdrs->x_op) {
-
- case XDR_ENCODE:
- newpos = rstrm->out_finger - delta;
- if ((newpos > (caddr_t) (rstrm->frag_header)) &&
- (newpos < rstrm->out_boundry)) {
- rstrm->out_finger = newpos;
- return (TRUE);
- }
- break;
-
- case XDR_DECODE:
- newpos = rstrm->in_finger - delta;
- if ((delta < (int) (rstrm->fbtbc)) &&
- (newpos <= rstrm->in_boundry) &&
- (newpos >= rstrm->in_base)) {
- rstrm->in_finger = newpos;
- rstrm->fbtbc -= delta;
- return (TRUE);
- }
- break;
- }
- return (FALSE);
-}
-
-static int32_t *xdrrec_inline(xdrs, len)
-register XDR *xdrs;
-int len;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) xdrs->x_private;
- int32_t *buf = NULL;
-
- switch (xdrs->x_op) {
-
- case XDR_ENCODE:
- if ((rstrm->out_finger + len) <= rstrm->out_boundry) {
- buf = (int32_t *) rstrm->out_finger;
- rstrm->out_finger += len;
- }
- break;
-
- case XDR_DECODE:
- if ((len <= rstrm->fbtbc) &&
- ((rstrm->in_finger + len) <= rstrm->in_boundry)) {
- buf = (int32_t *) rstrm->in_finger;
- rstrm->fbtbc -= len;
- rstrm->in_finger += len;
- }
- break;
- }
- return (buf);
-}
-
-static void xdrrec_destroy(xdrs)
-register XDR *xdrs;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) xdrs->x_private;
-
- mem_free(rstrm->the_buffer,
- rstrm->sendsize + rstrm->recvsize + BYTES_PER_XDR_UNIT);
- mem_free((caddr_t) rstrm, sizeof(RECSTREAM));
-}
-
-
-/*
- * Exported routines to manage xdr records
- */
-
-/*
- * Before reading (deserializing from the stream, one should always call
- * this procedure to guarantee proper record alignment.
- */
-bool_t xdrrec_skiprecord(xdrs)
-XDR *xdrs;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
-
- while (rstrm->fbtbc > 0 || (!rstrm->last_frag)) {
- if (!skip_input_bytes(rstrm, rstrm->fbtbc))
- return (FALSE);
- rstrm->fbtbc = 0;
- if ((!rstrm->last_frag) && (!set_input_fragment(rstrm)))
- return (FALSE);
- }
- rstrm->last_frag = FALSE;
- return (TRUE);
-}
-
-/*
- * Look ahead fuction.
- * Returns TRUE iff there is no more input in the buffer
- * after consuming the rest of the current record.
- */
-bool_t xdrrec_eof(xdrs)
-XDR *xdrs;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
-
- while (rstrm->fbtbc > 0 || (!rstrm->last_frag)) {
- if (!skip_input_bytes(rstrm, rstrm->fbtbc))
- return (TRUE);
- rstrm->fbtbc = 0;
- if ((!rstrm->last_frag) && (!set_input_fragment(rstrm)))
- return (TRUE);
- }
- if (rstrm->in_finger == rstrm->in_boundry)
- return (TRUE);
- return (FALSE);
-}
-
-/*
- * The client must tell the package when an end-of-record has occurred.
- * The second paraemters tells whether the record should be flushed to the
- * (output) tcp stream. (This let's the package support batched or
- * pipelined procedure calls.) TRUE => immmediate flush to tcp connection.
- */
-bool_t xdrrec_endofrecord(xdrs, sendnow)
-XDR *xdrs;
-bool_t sendnow;
-{
- register RECSTREAM *rstrm = (RECSTREAM *) (xdrs->x_private);
- register u_long len; /* fragment length */
-
- if (sendnow || rstrm->frag_sent ||
- ((u_long) rstrm->out_finger + sizeof(u_long) >=
- (u_long) rstrm->out_boundry)) {
- rstrm->frag_sent = FALSE;
- return (flush_out(rstrm, TRUE));
- }
- len = (u_long) (rstrm->out_finger) - (u_long) (rstrm->frag_header) -
- sizeof(u_long);
- *(rstrm->frag_header) = htonl((u_long) len | LAST_FRAG);
- rstrm->frag_header = (u_long *) rstrm->out_finger;
- rstrm->out_finger += sizeof(u_long);
- return (TRUE);
-}
-
-
diff --git a/mdk-stage1/dietlibc/librpc/xdr_reference.c b/mdk-stage1/dietlibc/librpc/xdr_reference.c
deleted file mode 100644
index 7715d821c..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_reference.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* @(#)xdr_reference.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] = "@(#)xdr_reference.c 1.11 87/08/11 SMI";
-#endif
-
-/*
- * xdr_reference.c, Generic XDR routines impelmentation.
- *
- * Copyright (C) 1987, Sun Microsystems, Inc.
- *
- * These are the "non-trivial" xdr primitives used to serialize and de-serialize
- * "pointers". See xdr.h for more info on the interface to xdr.
- */
-
-#include <stdio.h>
-#include <rpc/types.h>
-#include <rpc/xdr.h>
-#include <string.h>
-
-#define LASTUNSIGNED ((u_int)0-1)
-
-/*
- * XDR an indirect pointer
- * xdr_reference is for recursively translating a structure that is
- * referenced by a pointer inside the structure that is currently being
- * translated. pp references a pointer to storage. If *pp is null
- * the necessary storage is allocated.
- * size is the sizeof the referneced structure.
- * proc is the routine to handle the referenced structure.
- */
-bool_t xdr_reference(xdrs, pp, size, proc)
-register XDR *xdrs;
-caddr_t *pp; /* the pointer to work on */
-u_int size; /* size of the object pointed to */
-xdrproc_t proc; /* xdr routine to handle the object */
-{
- register caddr_t loc = *pp;
- register bool_t stat;
-
- if (loc == NULL)
- switch (xdrs->x_op) {
- case XDR_FREE:
- return (TRUE);
-
- case XDR_DECODE:
- *pp = loc = (caddr_t) mem_alloc(size);
- if (loc == NULL) {
- (void) fprintf(stderr, "xdr_reference: out of memory\n");
- return (FALSE);
- }
- bzero(loc, (int) size);
- break;
- }
-
- stat = (*proc) (xdrs, loc, LASTUNSIGNED);
-
- if (xdrs->x_op == XDR_FREE) {
- mem_free(loc, size);
- *pp = NULL;
- }
- return (stat);
-}
-
-
-/*
- * xdr_pointer():
- *
- * XDR a pointer to a possibly recursive data structure. This
- * differs with xdr_reference in that it can serialize/deserialiaze
- * trees correctly.
- *
- * What's sent is actually a union:
- *
- * union object_pointer switch (boolean b) {
- * case TRUE: object_data data;
- * case FALSE: void nothing;
- * }
- *
- * > objpp: Pointer to the pointer to the object.
- * > obj_size: size of the object.
- * > xdr_obj: routine to XDR an object.
- *
- */
-bool_t xdr_pointer(xdrs, objpp, obj_size, xdr_obj)
-register XDR *xdrs;
-char **objpp;
-u_int obj_size;
-xdrproc_t xdr_obj;
-{
-
- bool_t more_data;
-
- more_data = (*objpp != NULL);
- if (!xdr_bool(xdrs, &more_data)) {
- return (FALSE);
- }
- if (!more_data) {
- *objpp = NULL;
- return (TRUE);
- }
- return (xdr_reference(xdrs, objpp, obj_size, xdr_obj));
-}
diff --git a/mdk-stage1/dietlibc/librpc/xdr_stdio.c b/mdk-stage1/dietlibc/librpc/xdr_stdio.c
deleted file mode 100644
index e3190e0a9..000000000
--- a/mdk-stage1/dietlibc/librpc/xdr_stdio.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* @(#)xdr_stdio.c 2.1 88/07/29 4.0 RPCSRC */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-#if !defined(lint) && defined(SCCSIDS)
-static char sccsid[] =
-
- "@(#)xdr_stdio.c 1.16 87/08/11 Copyr 1984 Sun Micro";
-#endif
-
-/*
- * xdr_stdio.c, XDR implementation on standard i/o file.
- *
- * Copyright (C) 1984, Sun Microsystems, Inc.
- *
- * This set of routines implements a XDR on a stdio stream.
- * XDR_ENCODE serializes onto the stream, XDR_DECODE de-serializes
- * from the stream.
- */
-
-#include <rpc/types.h>
-#include <stdio.h>
-#include <rpc/xdr.h>
-
-static bool_t xdrstdio_getlong();
-static bool_t xdrstdio_putlong();
-static bool_t xdrstdio_getbytes();
-static bool_t xdrstdio_putbytes();
-static u_int xdrstdio_getpos();
-static bool_t xdrstdio_setpos();
-static int32_t *xdrstdio_inline();
-static void xdrstdio_destroy();
-
-/*
- * Ops vector for stdio type XDR
- */
-static struct xdr_ops xdrstdio_ops = {
- xdrstdio_getlong, /* deseraialize a long int */
- xdrstdio_putlong, /* seraialize a long int */
- xdrstdio_getbytes, /* deserialize counted bytes */
- xdrstdio_putbytes, /* serialize counted bytes */
- xdrstdio_getpos, /* get offset in the stream */
- xdrstdio_setpos, /* set offset in the stream */
- xdrstdio_inline, /* prime stream for inline macros */
- xdrstdio_destroy /* destroy stream */
-};
-
-/*
- * Initialize a stdio xdr stream.
- * Sets the xdr stream handle xdrs for use on the stream file.
- * Operation flag is set to op.
- */
-void xdrstdio_create(xdrs, file, op)
-register XDR *xdrs;
-FILE *file;
-enum xdr_op op;
-{
-
- xdrs->x_op = op;
- xdrs->x_ops = &xdrstdio_ops;
- xdrs->x_private = (caddr_t) file;
- xdrs->x_handy = 0;
- xdrs->x_base = 0;
-}
-
-/*
- * Destroy a stdio xdr stream.
- * Cleans up the xdr stream handle xdrs previously set up by xdrstdio_create.
- */
-static void xdrstdio_destroy(xdrs)
-register XDR *xdrs;
-{
- (void) fflush((FILE *) xdrs->x_private);
- /* xx should we close the file ?? */
-};
-
-static bool_t xdrstdio_getlong(xdrs, lp)
-XDR *xdrs;
-register long *lp;
-{
-
- if (fread((caddr_t) lp, sizeof(long), 1, (FILE *) xdrs->x_private) !=
- 1) return (FALSE);
-
-#ifndef mc68000
- *lp = ntohl(*lp);
-#endif
- return (TRUE);
-}
-
-static bool_t xdrstdio_putlong(xdrs, lp)
-XDR *xdrs;
-long *lp;
-{
-
-#ifndef mc68000
- long mycopy = htonl(*lp);
-
- lp = &mycopy;
-#endif
- if (fwrite((caddr_t) lp, sizeof(long), 1, (FILE *) xdrs->x_private) !=
- 1) return (FALSE);
-
- return (TRUE);
-}
-
-static bool_t xdrstdio_getbytes(xdrs, addr, len)
-XDR *xdrs;
-caddr_t addr;
-u_int len;
-{
-
- if ((len != 0)
- && (fread(addr, (int) len, 1, (FILE *) xdrs->x_private) != 1))
- return (FALSE);
- return (TRUE);
-}
-
-static bool_t xdrstdio_putbytes(xdrs, addr, len)
-XDR *xdrs;
-caddr_t addr;
-u_int len;
-{
-
- if ((len != 0)
- && (fwrite(addr, (int) len, 1, (FILE *) xdrs->x_private) != 1))
- return (FALSE);
- return (TRUE);
-}
-
-static u_int xdrstdio_getpos(xdrs)
-XDR *xdrs;
-{
-
- return ((u_int) ftell((FILE *) xdrs->x_private));
-}
-
-static bool_t xdrstdio_setpos(xdrs, pos)
-XDR *xdrs;
-u_int pos;
-{
-
- return ((fseek((FILE *) xdrs->x_private, (long) pos, 0) < 0) ?
- FALSE : TRUE);
-}
-
-static int32_t *xdrstdio_inline(xdrs, len)
-XDR *xdrs;
-u_int len;
-{
-
- /*
- * Must do some work to implement this: must insure
- * enough data in the underlying stdio buffer,
- * that the buffer is aligned so that we can indirect through a
- * long *, and stuff this pointer in xdrs->x_buf. Doing
- * a fread or fwrite to a scratch buffer would defeat
- * most of the gains to be had here and require storage
- * management on this buffer, so we don't do this.
- */
- return (NULL);
-}
diff --git a/mdk-stage1/dietlibc/libshell/fnmatch.c b/mdk-stage1/dietlibc/libshell/fnmatch.c
deleted file mode 100644
index 4e7664510..000000000
--- a/mdk-stage1/dietlibc/libshell/fnmatch.c
+++ /dev/null
@@ -1,74 +0,0 @@
-#include <ctype.h>
-#include <fnmatch.h>
-
-#define NOTFIRST 128
-
-static int match(char c,char d,int flags) {
- if (flags&FNM_CASEFOLD)
- return (tolower(c)==tolower(d));
- else
- return (c==d);
-}
-
-int fnmatch(const char *pattern, const char *string, int flags) {
- if (*string==0) {
- while (*pattern=='*') ++pattern;
- return (!!*pattern);
- }
- if (*string=='.' && *pattern!='.' && (flags&FNM_PERIOD)) {
- /* don't match if FNM_PERIOD and this is the first char */
- if ((flags&FNM_PERIOD) && (!(flags&NOTFIRST)))
- return 1;
- /* don't match if FNM_PERIOD and FNM_FILE_NAME and previous was '/' */
- if ((flags&(FNM_FILE_NAME|FNM_PERIOD)) && string[-1]=='/')
- return 1;
- }
- flags|=NOTFIRST;
- switch (*pattern) {
- case '[':
- ++pattern;
- while (*pattern && *pattern!=']') {
- if (flags&FNM_PATHNAME || *string!='/') {
- int res=0;
- if (pattern[1]=='-') {
- if (*string>=*pattern && *string<=pattern[2]) res=1;
- if (flags&FNM_CASEFOLD) {
- if (tolower(*string)>=tolower(*pattern) && tolower(*string)<=tolower(pattern[2])) res=1;
- }
- } else
- res=match(*pattern,*string,flags);
- if (res) {
- while (*pattern && *pattern!=']') ++pattern;
- return fnmatch(pattern+1,string+1,flags);
- }
- }
- ++pattern;
- }
- break;
- case '\\':
- if (flags&FNM_NOESCAPE) {
- if (*string=='\\')
- return fnmatch(pattern+1,string+1,flags);
- } else {
- if (*string==pattern[1])
- return fnmatch(pattern+2,string+1,flags);
- }
- break;
- case '*':
- if (!pattern[1] || fnmatch(pattern+1,string,flags)==0)
- return 0;
- else
- if (*string!='/')
- return fnmatch(pattern,string+1,flags);
- break;
- case 0:
- if (*string==0 || (*string=='/' && (flags&FNM_LEADING_DIR)))
- return 0;
- break;
- default:
- if (match(*pattern,*string,flags))
- return fnmatch(pattern+1,string+1,flags);
- break;
- }
- return 1;
-}
diff --git a/mdk-stage1/dietlibc/libshell/glob.c b/mdk-stage1/dietlibc/libshell/glob.c
deleted file mode 100644
index 34d09d87a..000000000
--- a/mdk-stage1/dietlibc/libshell/glob.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * dietlibc/libshell/glob.c
- *
- * Copyright 2001 Guillaume Cottenceau <gc@mandrakesoft.com>
- *
- * This is free software, licensed under the Gnu General Public License.
- *
- */
-
-/*
- * unsupported: GLOB_BRACE GLOB_ALTDIRFUNC GLOB_MAGCHAR
- */
-
-#define DEBUG(x)
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <assert.h>
-#include <fnmatch.h>
-#include <dirent.h>
-#include <pwd.h>
-
-#include <glob.h>
-
-
-
-/* If i18n, should be using strcoll */
-static int cmp_func(const void * a, const void * b)
-{
- const char *const s1 = *(const char *const * const) a;
- const char *const s2 = *(const char *const * const) b;
- if (s1 == NULL)
- return 1;
- if (s2 == NULL)
- return -1;
- return strcmp(s1, s2);
-}
-
-
-/* Like `glob', but PATTERN is a final pathname component,
- and matches are searched for in DIRECTORY.
- The GLOB_NOSORT bit in FLAGS is ignored. No sorting is ever done.
- The GLOB_APPEND flag is assumed to be set (always appends).
- Prepends DIRECTORY in constructed PGLOB. */
-static int glob_in_dir(const char *pattern, const char *directory, int flags,
- int errfunc(const char * epath, int eerrno),
- glob_t *pglob)
-{
- DIR *dp = opendir(directory);
- int nfound = 0;
-
- int i;
- char * ptr;
-
- void close_dir_keep_errno(void) {
- int save = errno;
- if (dp)
- closedir (dp);
- __set_errno(save);
- }
- int add_entry(const char * name) {
- pglob->gl_pathv = (char **) realloc(pglob->gl_pathv,
- (pglob->gl_pathc + pglob->gl_offs + 2)
- * sizeof (char *));
- if (pglob->gl_pathv == NULL)
- return 1;
- pglob->gl_pathv[pglob->gl_offs + pglob->gl_pathc] = strdup(name);
- pglob->gl_pathv[pglob->gl_offs + pglob->gl_pathc + 1] = NULL;
- pglob->gl_pathc++;
- nfound++;
- return 0;
- }
- void build_fullname(char * fullname, int fullnamesize, const char * directory, const char * filename) {
- if (!strcmp(directory, "/"))
- snprintf(fullname, fullnamesize, "/%s", filename);
- else if (!strcmp(directory, "."))
- snprintf(fullname, fullnamesize, "%s", filename);
- else
- snprintf(fullname, fullnamesize, "%s/%s", directory, filename);
- }
-
- if (!dp) {
- if (errno != ENOTDIR
- && ((errfunc != NULL && (*errfunc) (directory, errno))
- || (flags & GLOB_ERR)))
- return GLOB_ABORTED;
- } else {
- int fnm_flags = ((!(flags & GLOB_PERIOD) ? FNM_PERIOD : 0)
- | ((flags & GLOB_NOESCAPE) ? FNM_NOESCAPE : 0));
- struct dirent *ep;
- while ((ep = readdir(dp))) {
- i = strlen(directory) + strlen(ep->d_name) + 2;
- ptr = (char *) alloca(i);
- build_fullname(ptr, i, directory, ep->d_name);
- if (flags & GLOB_ONLYDIR) {
- struct stat statr;
- if (stat(ptr, &statr) || !S_ISDIR(statr.st_mode))
- continue;
- }
- if (fnmatch(pattern, ep->d_name, fnm_flags) == 0)
- if (add_entry(ptr))
- goto memory_error;
- }
- }
-
- close_dir_keep_errno();
-
- if (nfound != 0)
- pglob->gl_flags = flags;
- else if (flags & GLOB_NOCHECK) {
- /* nfound == 0 */
- i = strlen(directory) + strlen(pattern) + 2;
- ptr = (char *) alloca(i);
- build_fullname(ptr, i, directory, pattern);
- if (add_entry(ptr))
- goto memory_error;
- }
-
- return (nfound == 0) ? GLOB_NOMATCH : 0;
-
- memory_error:
- /* We're in trouble since we can't free the already allocated memory. [allocated from strdup(filame)]
- * Well, after all, when malloc returns NULL we're already in a bad mood, and no doubt the
- * program will manage to segfault by itself very soon :-). */
- close_dir_keep_errno();
- return GLOB_NOSPACE;
-}
-
-
-
-int glob(const char *pattern, int flags, int errfunc(const char * epath, int eerrno), glob_t *pglob)
-{
- char * pattern_;
- char * filename;
- char * dirname;
- size_t oldcount;
- struct stat statr;
-
- size_t i; /* tmp variables are declared here to save a bit of object space */
- int j, k; /* */
- char * ptr, * ptr2;
-
- if (pattern == NULL || pglob == NULL || (flags & ~__GLOB_FLAGS) != 0) {
- __set_errno (EINVAL);
- return -1;
- }
-
- if (!(flags & GLOB_DOOFFS))
- pglob->gl_offs = 0;
-
-
- /* Duplicate pattern so I can make modif to it later (to handle
- TILDE stuff replacing old contents, and to null-terminate the
- directory) */
- pattern_ = alloca(strlen(pattern) + 1);
- strcpy(pattern_, pattern);
-
- /* Check for TILDE stuff */
- if ((flags & (GLOB_TILDE|GLOB_TILDE_CHECK)) && pattern_[0] == '~') {
- char * home_dir = NULL;
- if (pattern_[1] == '\0' || pattern_[1] == '/') {
- /* She's asking for ~, her homedir */
- home_dir = getenv("HOME");
- } else {
- /* She's asking for another one's homedir */
- struct passwd * p;
- ptr2 = alloca(strlen(pattern_) + 1);
- strcpy(ptr2, pattern_ + 1);
- ptr = strchr(ptr2, '/');
- if (ptr != NULL)
- *ptr = '\0';
- if (((p = getpwnam(ptr2)) != NULL))
- home_dir = p->pw_dir;
- }
- if (home_dir != NULL) {
- i = strlen(home_dir) + strlen(pattern_); /* pessimistic (the ~ case) */
- ptr = alloca(i);
- strncpy(ptr, home_dir, i);
- ptr2 = pattern_ + 1;
- while (*ptr2 != '/' && *ptr2 != '\0')
- ptr2++;
- strncat(ptr, ptr2, i);
- pattern_ = ptr;
- } else if (flags & GLOB_TILDE_CHECK)
- return GLOB_NOMATCH;
- }
-
- /* Find the filename */
- filename = strrchr(pattern_, '/');
-
- if (filename == NULL) {
- /* We have no '/' in the pattern */
- filename = pattern_;
- dirname = ".";
- } else if (filename == pattern_) {
- /* "/pattern". */
- dirname = "/";
- filename++;
- } else {
- dirname = pattern_;
- filename++;
- /* allow dirname to be null terminated */
- *(filename-1) = '\0';
-
- if (filename[0] == '\0' && strcmp(pattern_, "/")) {
- /* "pattern/". Expand "pattern", appending slashes. */
- j = glob(dirname, flags | GLOB_MARK, errfunc, pglob);
- if (j == 0)
- pglob->gl_flags = ((pglob->gl_flags & ~GLOB_MARK)
- | (flags & GLOB_MARK));
- return j;
- }
- }
-
-
- /* Reserve memory for pglob */
- if (!(flags & GLOB_APPEND)) {
- pglob->gl_pathc = 0;
- if (!(flags & GLOB_DOOFFS))
- pglob->gl_pathv = NULL;
- else {
- pglob->gl_pathv = (char **) malloc((pglob->gl_offs + 1) * sizeof (char *));
- if (pglob->gl_pathv == NULL)
- return GLOB_NOSPACE;
- for (i = 0; i <= pglob->gl_offs; i++)
- pglob->gl_pathv[i] = NULL;
- }
- }
-
-
- oldcount = pglob->gl_pathc + pglob->gl_offs;
-
-
- /* Begin real work */
- if (!strcmp(dirname, "/") || !strcmp(dirname, ".")
- || (!strchr(dirname, '*') && !strchr(dirname, '?') && !strchr(dirname, '['))) {
- /* Approx of a terminal state, glob directly in dir. */
- j = glob_in_dir(filename, dirname, flags, errfunc, pglob);
- if (j != 0)
- return j;
- } else {
- /* We are not in a terminal state, so we have to glob for
- the directory, and then glob for the pattern in each
- directory found. */
- glob_t dirs;
-
- j = glob(dirname, ((flags & (GLOB_ERR | GLOB_NOCHECK | GLOB_NOESCAPE | GLOB_ALTDIRFUNC))
- | GLOB_NOSORT | GLOB_ONLYDIR),
- errfunc, &dirs);
- if (j != 0)
- return j;
-
- /* We have successfully globbed the directory name.
- For each name we found, call glob_in_dir on it and FILENAME,
- appending the results to PGLOB. */
- for (i = 0; i < dirs.gl_pathc; i++) {
- j = glob_in_dir(filename, dirs.gl_pathv[i], ((flags | GLOB_APPEND) & ~GLOB_NOCHECK),
- errfunc, pglob);
- if (j == GLOB_NOMATCH)
- /* No matches in this directory. Try the next. */
- continue;
- if (j != 0) {
- globfree(&dirs);
- globfree(pglob);
- return j;
- }
- }
-
- /* We have ignored the GLOB_NOCHECK flag in the `glob_in_dir' calls.
- But if we have not found any matching entry and the GLOB_NOCHECK
- flag was set we must return the list consisting of the disrectory
- names followed by the filename. */
- if (pglob->gl_pathc + pglob->gl_offs == oldcount)
- {
- /* No matches. */
- if (flags & GLOB_NOCHECK)
- {
- for (i = 0; i < dirs.gl_pathc; i++) {
- if (stat(dirs.gl_pathv[i], &statr) || !S_ISDIR(statr.st_mode))
- continue;
-
- /* stat is okay, we will add the entry, but before let's resize the pathv */
- j = pglob->gl_pathc + pglob->gl_offs;
- pglob->gl_pathv = (char **) realloc(pglob->gl_pathv, (j + 2) * sizeof (char *));
- if (pglob->gl_pathv == NULL) {
- globfree (&dirs);
- return GLOB_NOSPACE;
- }
-
- /* okay now we add the new entry */
- k = strlen(dirs.gl_pathv[i]) + 1 + strlen(filename) + 1;
- if ((pglob->gl_pathv[j] = malloc(k)) == NULL) {
- globfree(&dirs);
- globfree(pglob);
- return GLOB_NOSPACE;
- }
- snprintf(pglob->gl_pathv[j], k, "%s/%s", dirs.gl_pathv[i], filename);
- pglob->gl_pathc++;
- pglob->gl_pathv[j+1] = NULL;
- }
- } else {
- globfree(&dirs);
- return GLOB_NOMATCH;
- }
- }
-
- globfree (&dirs);
- }
-
-
- if (flags & GLOB_MARK) {
- for (i = oldcount; i < pglob->gl_pathc + pglob->gl_offs; i++)
- if (!stat(pglob->gl_pathv[i], &statr) && S_ISDIR(statr.st_mode)) {
- size_t len = strlen(pglob->gl_pathv[i]) + 2;
- ptr = realloc(pglob->gl_pathv[i], len);
- if (ptr == NULL) {
- globfree(pglob);
- return GLOB_NOSPACE;
- }
- strcpy(&ptr[len - 2], "/");
- pglob->gl_pathv[i] = ptr;
- }
- }
-
- if (!(flags & GLOB_NOSORT)) {
- qsort(&pglob->gl_pathv[oldcount],
- pglob->gl_pathc + pglob->gl_offs - oldcount,
- sizeof(char *), cmp_func);
- }
-
- return 0;
-}
-
-
-/* Free storage allocated in PGLOB by a previous `glob' call. */
-void globfree (glob_t * pglob)
-{
- if (pglob->gl_pathv != NULL) {
- size_t i;
- for (i = 0; i < pglob->gl_pathc; i++)
- if (pglob->gl_pathv[pglob->gl_offs + i] != NULL)
- free((void *) pglob->gl_pathv[pglob->gl_offs + i]);
- free((void *) pglob->gl_pathv);
- }
-}
diff --git a/mdk-stage1/dietlibc/libshell/realpath.c b/mdk-stage1/dietlibc/libshell/realpath.c
deleted file mode 100644
index 1377018e5..000000000
--- a/mdk-stage1/dietlibc/libshell/realpath.c
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <limits.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <string.h>
-#include "dietfeatures.h"
-
-char *realpath(const char *path, char *resolved_path) {
- int fd=open(".",O_RDONLY);
- char *tmp="";
- if (chdir(path)) {
-#ifdef WANT_THREAD_SAFE
- if (*__errno_location()==ENOTDIR)
-#else
- if (errno==ENOTDIR)
-#endif
- {
- if ((tmp=strrchr(path,'/'))) {
- memmove(resolved_path,path,tmp-path);
- resolved_path[tmp-path]=0;
- if (chdir(resolved_path)) { resolved_path=0; goto abort; }
- }
- }
- }
- if (!getcwd(resolved_path,PATH_MAX)) { resolved_path=0; goto abort; }
- strcat(resolved_path,tmp);
-abort:
- fchdir(fd);
- close(fd);
- return resolved_path;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/clearerr.c b/mdk-stage1/dietlibc/libstdio/clearerr.c
deleted file mode 100644
index 8bde8c702..000000000
--- a/mdk-stage1/dietlibc/libstdio/clearerr.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "dietstdio.h"
-
-void clearerr( FILE *stream) {
- stream->flags&=~(ERRORINDICATOR|EOFINDICATOR);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fclose.c b/mdk-stage1/dietlibc/libstdio/fclose.c
deleted file mode 100644
index a955c6086..000000000
--- a/mdk-stage1/dietlibc/libstdio/fclose.c
+++ /dev/null
@@ -1,26 +0,0 @@
-#include "dietstdio.h"
-#include <stdlib.h>
-#include <unistd.h>
-
-int fclose(FILE *stream) {
- int res;
-#ifdef WANT_BUFFERED_STDIO
- FILE *f,*fl;
-#endif
- if (!stream)
- return EOF;
- fflush(stream);
- res=close(stream->fd);
-#ifdef WANT_BUFFERED_STDIO
- for (fl=0,f=__stdio_root; f; fl=f,f=f->next)
- if (f==stream) {
- if (fl)
- fl->next=f->next;
- else
- __stdio_root=f->next;
- break;
- }
-#endif
- free(stream);
- return res;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fdglue.c b/mdk-stage1/dietlibc/libstdio/fdglue.c
deleted file mode 100644
index 1c3918f1f..000000000
--- a/mdk-stage1/dietlibc/libstdio/fdglue.c
+++ /dev/null
@@ -1,52 +0,0 @@
-#include "dietstdio.h"
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <stdlib.h>
-
-#ifdef WANT_BUFFERED_STDIO
-extern int __stdio_atexit;
-extern void __stdio_flushall();
-#endif
-
-int __stdio_parse_mode(const char *mode) {
- int f=0;
- for (;;) {
- switch (*mode) {
- case 0: return f;
- case 'b': break;
- case 'r': f=O_RDONLY; break;
- case 'w': f=O_WRONLY|O_CREAT|O_TRUNC; break;
- case 'a': f=O_WRONLY|O_CREAT|O_APPEND; break;
- case '+': f=(f&(~O_WRONLY))|O_RDWR; break;
- }
- ++mode;
- }
-}
-
-FILE* __stdio_init_file(int fd) {
- FILE *tmp=(FILE*)malloc(sizeof(FILE));
- if (!tmp) {
- close(fd);
- errno=ENOMEM;
- return 0;
- }
- tmp->fd=fd;
-#ifdef WANT_BUFFERED_STDIO
- tmp->bm=0;
- tmp->bs=0;
-#endif
-#ifdef WANT_UNGETC
- tmp->ungotten = 0;
-#endif
- tmp->flags=0;
-#ifdef WANT_BUFFERED_STDIO
- if (__stdio_atexit==0) {
- __stdio_atexit=1;
- atexit(__stdio_flushall);
- }
- tmp->next=__stdio_root;
- __stdio_root=tmp;
-#endif
- return tmp;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fdopen.c b/mdk-stage1/dietlibc/libstdio/fdopen.c
deleted file mode 100644
index aee14fb0c..000000000
--- a/mdk-stage1/dietlibc/libstdio/fdopen.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <sys/types.h>
-#include <dietstdio.h>
-#include <unistd.h>
-
-#define SEEK_END 2
-
-int __stdio_parse_mode(const char *mode);
-FILE* __stdio_init_file(int fd);
-
-FILE *fdopen (int filedes, const char *mode) {
- int f=0; /* O_RDONLY, O_WRONLY or O_RDWR */
- int fd;
-
- f=__stdio_parse_mode(mode);
- if ((fd=filedes)<0) return 0;
- {
- FILE * ret = __stdio_init_file(fd);
- ret->flags |= UNSEEKABLE;
- return ret;
- }
-}
diff --git a/mdk-stage1/dietlibc/libstdio/feof.c b/mdk-stage1/dietlibc/libstdio/feof.c
deleted file mode 100644
index b7e86fe3b..000000000
--- a/mdk-stage1/dietlibc/libstdio/feof.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <dietstdio.h>
-
-int feof(FILE *stream) {
-#ifdef WANT_UNGETC
- /* yuck!!! */
- if (stream->ungotten) return 0;
-#endif
- return (stream->flags&EOFINDICATOR);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/ferror.c b/mdk-stage1/dietlibc/libstdio/ferror.c
deleted file mode 100644
index e86873be0..000000000
--- a/mdk-stage1/dietlibc/libstdio/ferror.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <dietstdio.h>
-
-int ferror(FILE *stream) {
- return (stream->flags&ERRORINDICATOR);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fflush.c b/mdk-stage1/dietlibc/libstdio/fflush.c
deleted file mode 100644
index 7078e04f4..000000000
--- a/mdk-stage1/dietlibc/libstdio/fflush.c
+++ /dev/null
@@ -1,62 +0,0 @@
-#include "dietstdio.h"
-#include <unistd.h>
-#include <stdlib.h>
-#include "dietwarning.h"
-
-FILE *__stdio_root;
-
-#ifdef WANT_BUFFERED_STDIO
-int __stdio_atexit=0;
-
-void __stdio_flushall() {
- fflush(0);
-}
-
-extern int __fflush_stdin();
-extern int __fflush_stdout();
-extern int __fflush_stderr();
-
-int fflush(FILE *stream) {
- if (stream==0) {
- int res;
- FILE *f;
- __fflush_stdin();
- __fflush_stdout();
- __fflush_stderr();
- for (res=0, f=__stdio_root; f; f=f->next)
- if (fflush(f))
- res=-1;
- return res;
- }
- if (stream->flags&BUFINPUT) {
- register int tmp;
- if ((tmp=stream->bm-stream->bs)) lseek(stream->fd,tmp,SEEK_CUR);
- } else
- if (stream->bm && write(stream->fd,stream->buf,stream->bm)!=stream->bm) {
- stream->flags|=ERRORINDICATOR;
- return -1;
- }
- stream->bm=0;
- return 0;
-}
-
-int __fflush4(FILE *stream,int next) {
- if (!__stdio_atexit) {
- __stdio_atexit=1;
- atexit(__stdio_flushall);
- }
- if ((stream->flags&BUFINPUT)!=next) {
- int res=fflush(stream);
- stream->flags=(stream->flags&~BUFINPUT)|next;
- return res;
- }
- return 0;
-}
-
-#else
-int fflush(FILE *stream) {
- return 0;
-}
-#endif
-
-link_warning("fflush","warning: your code uses stdio (several kilobytes of bloat).")
diff --git a/mdk-stage1/dietlibc/libstdio/fgetc.c b/mdk-stage1/dietlibc/libstdio/fgetc.c
deleted file mode 100644
index 90d83961a..000000000
--- a/mdk-stage1/dietlibc/libstdio/fgetc.c
+++ /dev/null
@@ -1,40 +0,0 @@
-#include "dietstdio.h"
-#include <unistd.h>
-
-extern int feof(FILE *stream);
-
-int fgetc(FILE *stream) {
- unsigned char c;
-#ifdef WANT_UNGETC
- if (stream->ungotten) {
- stream->ungotten=0;
- return stream->ungetbuf;
- }
-#endif
- if (feof(stream))
- return EOF;
-#ifdef WANT_BUFFERED_STDIO
- if (__fflush4(stream,BUFINPUT)) return EOF;
- if (stream->bm>=stream->bs) {
- int len=read(stream->fd,stream->buf,BUFSIZE);
- if (len==0) {
- stream->flags|=EOFINDICATOR;
- return EOF;
- } else if (len<0) {
- stream->flags|=ERRORINDICATOR;
- return EOF;
- }
- stream->bm=0;
- stream->bs=len;
- }
- c=stream->buf[stream->bm];
- ++stream->bm;
- return c;
-#else
- if (read(stream->fd,&c,1)!=1) {
- stream->flags|=ERRORINDICATOR;
- return EOF;
- }
- return c;
-#endif
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fgets.c b/mdk-stage1/dietlibc/libstdio/fgets.c
deleted file mode 100644
index c613d452d..000000000
--- a/mdk-stage1/dietlibc/libstdio/fgets.c
+++ /dev/null
@@ -1,20 +0,0 @@
-#include "dietstdio.h"
-
-extern int ferror(FILE *stream);
-
-char *fgets(char *s, int size, FILE *stream) {
- char *orig=s;
- int l;
- for (l=size; l>0;) {
- int c=fgetc(stream);
- if (c==EOF) break;
- *s=c;
- ++s;
- --l;
- if (c=='\n') break;
- }
- if (l==size || ferror(stream))
- return 0;
- *s=0;
- return orig;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fileno.c b/mdk-stage1/dietlibc/libstdio/fileno.c
deleted file mode 100644
index f021d3881..000000000
--- a/mdk-stage1/dietlibc/libstdio/fileno.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <dietstdio.h>
-
-int fileno(FILE *stream) {
- return stream->fd;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fopen.c b/mdk-stage1/dietlibc/libstdio/fopen.c
deleted file mode 100644
index aac17be42..000000000
--- a/mdk-stage1/dietlibc/libstdio/fopen.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <sys/types.h>
-#include <dietstdio.h>
-#include <unistd.h>
-
-#define SEEK_END 2
-
-extern int __stdio_atexit;
-extern void __stdio_flushall();
-
-extern int __stdio_parse_mode(const char *mode);
-extern FILE* __stdio_init_file(int fd);
-
-FILE *fopen (const char *path, const char *mode) {
- int f=0; /* O_RDONLY, O_WRONLY or O_RDWR */
- int fd;
-
- f=__stdio_parse_mode(mode);
- if ((fd=open(path,f,0666))<0)
- return 0;
- return __stdio_init_file(fd);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fprintf.c b/mdk-stage1/dietlibc/libstdio/fprintf.c
deleted file mode 100644
index 237fd1e51..000000000
--- a/mdk-stage1/dietlibc/libstdio/fprintf.c
+++ /dev/null
@@ -1,23 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-extern int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int fprintf(FILE *f,const char *format,...) {
- int n;
- char *printf_buf;
-/* char printf_buf[1024]; */
- va_list arg_ptr;
- va_start(arg_ptr, format);
- n=vsnprintf(0,1000000,format,arg_ptr);
-/* write(1,printf_buf,strlen(printf_buf)); */
- va_end (arg_ptr);
- va_start (arg_ptr, format);
- printf_buf=alloca(n+2);
- n=vsnprintf(printf_buf,n+1,format,arg_ptr);
- va_end (arg_ptr);
- fwrite(printf_buf,n,1,f);
- return n;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fputc.c b/mdk-stage1/dietlibc/libstdio/fputc.c
deleted file mode 100644
index b816f7c4d..000000000
--- a/mdk-stage1/dietlibc/libstdio/fputc.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <dietstdio.h>
-#ifndef WANT_BUFFERED_STDIO
-#include <unistd.h>
-#endif
-
-int fputc(int c, FILE *stream) {
-#ifdef WANT_BUFFERED_STDIO
- if (__fflush4(stream,0)) return EOF;
- if (stream->bm>=BUFSIZE-1)
- if (fflush(stream)) return EOF;
- stream->buf[stream->bm]=c;
- ++stream->bm;
- if ((stream->flags&BUFLINEWISE) && c=='\n') /* puke */
- if (fflush(stream)) return EOF;
-#else
- write(stream->fd,&c,1);
-#endif
- return 0;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fputs.c b/mdk-stage1/dietlibc/libstdio/fputs.c
deleted file mode 100644
index 51ee9a96e..000000000
--- a/mdk-stage1/dietlibc/libstdio/fputs.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "dietstdio.h"
-#include <string.h>
-
-int fputs(const char *s, FILE *stream) {
- return fwrite(s,strlen(s),1,stream);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fread.c b/mdk-stage1/dietlibc/libstdio/fread.c
deleted file mode 100644
index 29afa1489..000000000
--- a/mdk-stage1/dietlibc/libstdio/fread.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <sys/types.h>
-#include "dietstdio.h"
-#include <unistd.h>
-
-size_t fread( void *ptr, size_t size, size_t nmemb, FILE *stream) {
- int res;
-#ifdef WANT_BUFFERED_STDIO
- unsigned long i,j;
- j=size*nmemb;
-#ifdef WANT_UNGETC
- if (stream->ungotten) {
- *(char*)ptr=stream->ungetbuf;
- ptr=((char*)ptr)+1;
- --j;
- }
- if (!j) return 1;
-#endif
- for (i=0; i<j; ++i) {
- res=fgetc(stream);
- if (res==EOF)
- return i/size;
- else
- ((unsigned char*)ptr)[i]=(unsigned char)res;
- }
- return nmemb;
-#else
-#ifdef WANT_UNGETC
- unsigned long j=size*nmemb;
-#endif
- fflush(stream);
-#ifdef WANT_UNGETC
- if (stream->ungotten) {
- *(char*)ptr=stream->ungetbuf;
- ptr=((char*)ptr)+1;
- --j;
- }
- if (!j) return 1;
- res=read(stream->fd,ptr,j);
-#else
- res=read(stream->fd,ptr,size*nmemb);
-#endif
- if (res<0) {
- stream->flags|=ERRORINDICATOR;
- return 0;
- } else if (res<size*nmemb)
- if (!(stream->flags & UNSEEKABLE)
- || ((stream->flags & UNSEEKABLE) && res == 0))
- stream->flags|=EOFINDICATOR;
- return res/size;
-#endif
-}
diff --git a/mdk-stage1/dietlibc/libstdio/freopen.c b/mdk-stage1/dietlibc/libstdio/freopen.c
deleted file mode 100644
index 8d4644a10..000000000
--- a/mdk-stage1/dietlibc/libstdio/freopen.c
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <sys/types.h>
-#include <dietstdio.h>
-#include <unistd.h>
-
-FILE *freopen (const char *path, const char *mode, FILE *stream) {
- fclose(stream);
- stream=fopen(path,mode);
- return stream;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fseek.c b/mdk-stage1/dietlibc/libstdio/fseek.c
deleted file mode 100644
index 5bb96bc6e..000000000
--- a/mdk-stage1/dietlibc/libstdio/fseek.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <dietstdio.h>
-#include <unistd.h>
-
-long fseek(FILE *stream, long offset, int whence) {
- fflush(stream);
-#ifdef WANT_BUFFERED_STDIO
- stream->bm=0; stream->bs=0;
-#endif
- stream->flags&=~(ERRORINDICATOR|EOFINDICATOR);
- return (lseek(stream->fd,offset,whence));
-}
diff --git a/mdk-stage1/dietlibc/libstdio/ftell.c b/mdk-stage1/dietlibc/libstdio/ftell.c
deleted file mode 100644
index 42d2c9f26..000000000
--- a/mdk-stage1/dietlibc/libstdio/ftell.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <dietstdio.h>
-#include <unistd.h>
-
-long ftell(FILE *stream) {
- fflush(stream);
- return (lseek(stream->fd,0,SEEK_CUR));
-}
diff --git a/mdk-stage1/dietlibc/libstdio/fwrite.c b/mdk-stage1/dietlibc/libstdio/fwrite.c
deleted file mode 100644
index 5691661a5..000000000
--- a/mdk-stage1/dietlibc/libstdio/fwrite.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <sys/types.h>
-#include "dietstdio.h"
-#include <unistd.h>
-
-size_t fwrite( const void *ptr, size_t size, size_t nmemb, FILE *stream) {
- int res;
-#ifdef WANT_BUFFERED_STDIO
- long len=size*nmemb;
- long i;
- if (len>BUFSIZE || (stream->flags&NOBUF)) {
- if (!(stream->flags&NOBUF)) fflush(stream);
- res=write(stream->fd,ptr,size*nmemb);
- } else {
- register const unsigned char *c=ptr;
- for (i=size*nmemb; i>0; --i,++c)
- if (fputc(*c,stream)) {
- res=-1;
- break;
- }
- res=size*nmemb;
- }
-#else
- res=write(stream->fd,ptr,size*nmemb);
-#endif
- if (res<0) {
- stream->flags|=ERRORINDICATOR;
- return 0;
- }
- return size?res/size:0;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/printf.c b/mdk-stage1/dietlibc/libstdio/printf.c
deleted file mode 100644
index 571420dc3..000000000
--- a/mdk-stage1/dietlibc/libstdio/printf.c
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include "dietstdio.h"
-
-int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int printf(const char *format,...)
-{
- int n;
- char *printf_buf;
-/* char printf_buf[1024]; */
- va_list arg_ptr;
- va_start(arg_ptr, format);
- n=vsnprintf(0,1000000,format,arg_ptr);
-/* write(1,printf_buf,strlen(printf_buf)); */
- va_end (arg_ptr);
- va_start (arg_ptr, format);
- printf_buf=alloca(n+2);
- n=vsnprintf(printf_buf,n+1,format,arg_ptr);
-#ifdef WANT_BUFFERED_STDIO
- fwrite(printf_buf,n,1,stdout);
-#else
- write(1,printf_buf,n);
-#endif
- va_end (arg_ptr);
- return n;
-}
diff --git a/mdk-stage1/dietlibc/libstdio/putchar.c b/mdk-stage1/dietlibc/libstdio/putchar.c
deleted file mode 100644
index 7e5285a48..000000000
--- a/mdk-stage1/dietlibc/libstdio/putchar.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <stdio.h>
-
-#undef putchar
-int putchar(int c) {
- return fputc(c,stdout);
-}
diff --git a/mdk-stage1/dietlibc/libstdio/setvbuf.c b/mdk-stage1/dietlibc/libstdio/setvbuf.c
deleted file mode 100644
index d0b1b7640..000000000
--- a/mdk-stage1/dietlibc/libstdio/setvbuf.c
+++ /dev/null
@@ -1,18 +0,0 @@
-#include <sys/types.h>
-#include "dietstdio.h"
-#include <unistd.h>
-#include "dietwarning.h"
-
-int setvbuf(FILE *stream, char *buf, int flags , size_t size) {
-#ifdef WANT_BUFFERED_STDIO
- switch (flags) {
- case _IONBF: stream->flags = (stream->flags & ~(BUFLINEWISE)) | NOBUF; break;
- case _IOLBF: stream->flags = (stream->flags & ~(BUFLINEWISE|NOBUF)) | BUFLINEWISE; break;
- case _IOFBF: stream->flags = stream->flags & ~(NOBUF | BUFLINEWISE); break;
- default: return -1;
- }
-#endif
- return 0;
-}
-
-link_warning("setvbuf","setvbuf does not implement changing the buffer in diet libc.")
diff --git a/mdk-stage1/dietlibc/libstdio/stderr.c b/mdk-stage1/dietlibc/libstdio/stderr.c
deleted file mode 100644
index a82b1b727..000000000
--- a/mdk-stage1/dietlibc/libstdio/stderr.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <dietstdio.h>
-
-#ifdef WANT_BUFFERED_STDIO
-static FILE __stderr = { 2, NOBUF, 0, 0 };
-
-int __fflush_stderr() {
- return fflush(stderr);
-}
-#else
-static FILE __stderr = { 2, 0 };
-#endif
-
-FILE *stderr=&__stderr;
diff --git a/mdk-stage1/dietlibc/libstdio/stdin.c b/mdk-stage1/dietlibc/libstdio/stdin.c
deleted file mode 100644
index 2db82f9ab..000000000
--- a/mdk-stage1/dietlibc/libstdio/stdin.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <dietstdio.h>
-
-#ifdef WANT_BUFFERED_STDIO
-static FILE __stdin = { 0, BUFINPUT, 0, 0 };
-
-int __fflush_stdin() {
- return fflush(stdin);
-}
-#else
-static FILE __stdin = { 0, 0 };
-#endif
-
-FILE *stdin=&__stdin;
diff --git a/mdk-stage1/dietlibc/libstdio/stdout.c b/mdk-stage1/dietlibc/libstdio/stdout.c
deleted file mode 100644
index 481fb1014..000000000
--- a/mdk-stage1/dietlibc/libstdio/stdout.c
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <dietstdio.h>
-
-#ifdef WANT_BUFFERED_STDIO
-static FILE __stdout = { 1, BUFLINEWISE, 0, 0 };
-
-int __fflush_stdout() {
- return fflush(stdout);
-}
-#else
-static FILE __stdout = { 1, 0 };
-#endif
-
-FILE *stdout=&__stdout;
-
diff --git a/mdk-stage1/dietlibc/libstdio/ungetc.c b/mdk-stage1/dietlibc/libstdio/ungetc.c
deleted file mode 100644
index ae03e9381..000000000
--- a/mdk-stage1/dietlibc/libstdio/ungetc.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include "dietstdio.h"
-
-#ifdef WANT_UNGETC
-int ungetc(int c, FILE *stream) {
- if (stream->ungotten)
- return EOF;
- stream->ungotten=1;
- stream->ungetbuf=(char)(unsigned char)c;
- return c;
-}
-#endif
diff --git a/mdk-stage1/dietlibc/libugly/asctime.c b/mdk-stage1/dietlibc/libugly/asctime.c
deleted file mode 100644
index e1fcc8706..000000000
--- a/mdk-stage1/dietlibc/libugly/asctime.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <time.h>
-
-static char buf[25];
-
-char *asctime(const struct tm *timeptr) {
- return asctime_r(timeptr,buf);
-}
diff --git a/mdk-stage1/dietlibc/libugly/asctime_r.c b/mdk-stage1/dietlibc/libugly/asctime_r.c
deleted file mode 100644
index 46325927c..000000000
--- a/mdk-stage1/dietlibc/libugly/asctime_r.c
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <time.h>
-
-static const char days[] = "Sun Mon Tue Wed Thu Fri Sat ";
-static const char months[] = "Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec ";
-
-static void num2str(char *c,int i) {
- c[0]=i/10+'0';
- c[1]=i%10+'0';
-}
-
-char *asctime_r(const struct tm *t, char *buf) {
- /* "Wed Jun 30 21:49:08 1993\n" */
- *(int*)buf=*(int*)(days+(t->tm_wday<<2));
- *(int*)(buf+4)=*(int*)(months+(t->tm_mon<<2));
- num2str(buf+8,t->tm_mday);
- if (buf[8]=='0') buf[8]=' ';
- buf[10]=' ';
- num2str(buf+11,t->tm_hour);
- if (buf[11]=='0') buf[11]=' ';
- buf[13]=':';
- num2str(buf+14,t->tm_min);
- buf[16]=':';
- num2str(buf+17,t->tm_sec);
- buf[19]=' ';
- num2str(buf+20,(t->tm_year+1900)/100);
- num2str(buf+22,(t->tm_year+1900)%100);
- buf[24]='\n';
- return buf;
-}
diff --git a/mdk-stage1/dietlibc/libugly/asprintf.c b/mdk-stage1/dietlibc/libugly/asprintf.c
deleted file mode 100644
index d10c20b4a..000000000
--- a/mdk-stage1/dietlibc/libugly/asprintf.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdlib.h>
-#include "dietwarning.h"
-
-extern int vsnprintf (char *str,size_t size,const char *format, va_list arg_ptr);
-
-int asprintf(char **s, const char *format,...)
-{
- int n;
- va_list arg_ptr;
- va_start(arg_ptr, format);
- n=vsnprintf(0,1000000,format,arg_ptr);
- va_end (arg_ptr);
- va_start (arg_ptr, format);
- if ((*s=malloc(n+2))) {
- n=vsnprintf(*s,n+1,format,arg_ptr);
- va_end(arg_ptr);
- return n;
- }
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libugly/ctime.c b/mdk-stage1/dietlibc/libugly/ctime.c
deleted file mode 100644
index a0e12d673..000000000
--- a/mdk-stage1/dietlibc/libugly/ctime.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <time.h>
-
-char *ctime(const time_t *timep) {
- return asctime(localtime(timep));
-}
diff --git a/mdk-stage1/dietlibc/libugly/daemon.c b/mdk-stage1/dietlibc/libugly/daemon.c
deleted file mode 100644
index 6748cc3c9..000000000
--- a/mdk-stage1/dietlibc/libugly/daemon.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <paths.h>
-
-#include "daemon.h"
-
-int daemon (int nochdir,int noclose)
-{
- int fd;
- switch (fork ())
- {
- case -1:
- return (-1);
- case 0:
- break;
- default:
- _exit (0);
- }
- if (setsid () == -1)
- return (-1);
- if (!nochdir) chdir ("/");
- if (!noclose)
- {
- fd = open (_PATH_DEVNULL,O_RDWR,0);
- if (fd == -1) return (-1);
- dup2 (fd,STDIN_FILENO);
- dup2 (fd,STDOUT_FILENO);
- dup2 (fd,STDERR_FILENO);
- close (fd);
- }
- return (0);
-}
-
diff --git a/mdk-stage1/dietlibc/libugly/endmntent.c b/mdk-stage1/dietlibc/libugly/endmntent.c
deleted file mode 100644
index 00ade38e5..000000000
--- a/mdk-stage1/dietlibc/libugly/endmntent.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdio.h>
-#include <mntent.h>
-
-int endmntent(FILE *filep) {
- return fclose(filep);
-}
-
diff --git a/mdk-stage1/dietlibc/libugly/facilitynames.c b/mdk-stage1/dietlibc/libugly/facilitynames.c
deleted file mode 100644
index 8b0e1f21f..000000000
--- a/mdk-stage1/dietlibc/libugly/facilitynames.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include <sys/syslog.h>
-
-#ifndef INTERNAL_MARK
-#define INTERNAL_MARK 0x300
-#endif
-
-CODE facilitynames[] =
- {
- { "auth", LOG_AUTH },
- { "authpriv", LOG_AUTHPRIV },
- { "cron", LOG_CRON },
- { "daemon", LOG_DAEMON },
- { "ftp", LOG_FTP },
- { "kern", LOG_KERN },
- { "lpr", LOG_LPR },
- { "mail", LOG_MAIL },
- { "mark", INTERNAL_MARK }, /* INTERNAL */
- { "news", LOG_NEWS },
- { "security", LOG_AUTH }, /* DEPRECATED */
- { "syslog", LOG_SYSLOG },
- { "user", LOG_USER },
- { "uucp", LOG_UUCP },
- { "local0", LOG_LOCAL0 },
- { "local1", LOG_LOCAL1 },
- { "local2", LOG_LOCAL2 },
- { "local3", LOG_LOCAL3 },
- { "local4", LOG_LOCAL4 },
- { "local5", LOG_LOCAL5 },
- { "local6", LOG_LOCAL6 },
- { "local7", LOG_LOCAL7 },
- { 0, -1 }
- };
diff --git a/mdk-stage1/dietlibc/libugly/getmntent.c b/mdk-stage1/dietlibc/libugly/getmntent.c
deleted file mode 100644
index 250a77b7f..000000000
--- a/mdk-stage1/dietlibc/libugly/getmntent.c
+++ /dev/null
@@ -1,30 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <mntent.h>
-#include <string.h>
-
-struct mntent *getmntent(FILE *filep) {
- static struct mntent m;
- char buf[1024];
- do {
- char *tmp=buf;
- int num;
- fgets(buf,1024,filep);
-/* "/dev/ide/host0/bus0/target0/lun0/part2 / reiserfs defaults 1 1" */
- for (num=0; num<6; ++num) {
- switch (num) {
- case 0: m.mnt_fsname=tmp; break;
- case 1: m.mnt_dir=tmp; break;
- case 2: m.mnt_type=tmp; break;
- case 3: m.mnt_opts=tmp; break;
- case 4: m.mnt_freq=strtol(tmp,&tmp,0); if (*tmp!=' ') continue; break;
- case 5: m.mnt_passno=strtol(tmp,&tmp,0); if (*tmp=='\n') return &m; break;
- }
- if ((tmp=strchr(tmp,' '))) {
- if (num<4) *tmp++=0;
- while (*tmp==' ') ++tmp;
- } else
- continue;
- }
- } while (1);
-}
diff --git a/mdk-stage1/dietlibc/libugly/getprotoent.c b/mdk-stage1/dietlibc/libugly/getprotoent.c
deleted file mode 100644
index a648e2307..000000000
--- a/mdk-stage1/dietlibc/libugly/getprotoent.c
+++ /dev/null
@@ -1,130 +0,0 @@
-#include <unistd.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <sys/mman.h>
-#include <errno.h>
-#include <netinet/in.h>
-#include <string.h>
-#include <ctype.h>
-
-static int protofd=-1;
-static char* protomap;
-static unsigned int protolen;
-
-static char* aliases[10];
-
-static char *cur;
-
-/* ip 0 IP # internet protocol, pseudo protocol number */
-struct protoent *getprotoent(void) {
- static struct protoent pe;
- char *last;
- int aliasidx;
- if (protofd<0) {
- protofd=open(_PATH_SERVICES,O_RDONLY);
- if (protofd<0) return 0;
- protolen=lseek(protofd,0,SEEK_END);
- protomap=mmap(0,protolen,PROT_READ|PROT_WRITE,MAP_PRIVATE,protofd,0);
- if ((long)protomap==(-1)) goto error;
- cur=protomap;
- }
- last=protomap+protolen;
-again:
- pe.p_name=0;
- pe.p_aliases=aliases; aliases[0]=0;
- pe.p_proto=0;
- if (cur>=last) return 0;
- if (*cur=='#' || *cur=='\n') goto parseerror;
- /* first, the primary name */
- if (!isalpha(*cur)) goto parseerror;
- pe.p_name=cur;
- pe.p_aliases=aliases;
- while (cur<last && isalnum(*cur)) cur++;
- if (cur>=last) return 0;
- if (*cur=='\n') goto parseerror;
- *cur=0; cur++;
- /* second, the protocol number */
- while (cur<last && isblank(*cur)) cur++;
- while (cur<last && isdigit(*cur)) {
- pe.p_proto=pe.p_proto*10+*cur-'0';
- cur++;
- }
-/* pe.p_proto=htons(pe.s_proto); */
- if (cur>=last) return 0;
- if (*cur=='\n') { *cur++=0; return &pe; }
- *cur=0; cur++;
- /* now the aliases */
- for (aliasidx=0;aliasidx<10;++aliasidx) {
- while (cur<last && isblank(*cur)) ++cur;
- aliases[aliasidx]=cur;
- while (cur<last && isalpha(*cur)) ++cur;
- if (*cur=='\n') { *cur++=0; ++aliasidx; break; }
- if (cur>=last || !isblank(*cur)) break;
- *cur++=0;
- }
- aliases[aliasidx]=0;
- return &pe;
-parseerror:
- while (cur<last && *cur!='\n') cur++;
- cur++;
- goto again;
-error:
- if (protomap!=(char*)-1) munmap(protomap,protolen);
- if (protofd!=-1) close(protofd);
- protomap=(char*)-1;
- protofd=-1;
- errno=ENOMEM;
- return 0;
-}
-
-void setprotoent(int stayopen) {
- cur=protomap;
-}
-
-struct protoent *getprotobyname(const char *name) {
- struct protoent *s;
- setprotoent(0);
- for (s=getprotoent(); s; s=getprotoent()) {
- char **tmp;
-#if 0
- write(1,"found ",6);
- write(1,s->p_name,strlen(s->p_name));
- write(1,"/",1);
- write(1,s->p_proto,strlen(s->p_proto));
- write(1,"\n",1);
- if (!strcmp(name,"auth")) {
- tmp=s->p_aliases;
- write(1," aka ",5);
- while (*tmp) {
- write(1,*tmp,strlen(*tmp));
- write(1,", ",2);
- ++tmp;
- }
- write(1,"\n",1);
- }
-#endif
- if (!strcmp(name,s->p_name))
- return s;
- tmp=s->p_aliases;
- while (*tmp)
- if (!strcmp(name,*tmp++)) return s;
- }
- return 0;
-}
-
-struct protoent *getprotobynumber(int proto) {
- struct protoent *s;
- for (s=getprotoent(); s; s=getprotoent()) {
- if (proto==s->p_proto)
- return s;
- }
- return 0;
-}
-
-void endprotoent(void) {
- if (protomap!=(char*)-1) munmap(protomap,protolen);
- if (protofd!=-1) close(protofd);
- protomap=(char*)-1;
- protofd=-1;
-}
-
diff --git a/mdk-stage1/dietlibc/libugly/gmtime.c b/mdk-stage1/dietlibc/libugly/gmtime.c
deleted file mode 100644
index d33af7972..000000000
--- a/mdk-stage1/dietlibc/libugly/gmtime.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <time.h>
-
-struct tm* gmtime(const time_t *t) {
- static struct tm tmp;
- return gmtime_r(t,&tmp);
-}
diff --git a/mdk-stage1/dietlibc/libugly/gmtime_r.c b/mdk-stage1/dietlibc/libugly/gmtime_r.c
deleted file mode 100644
index c102d10fa..000000000
--- a/mdk-stage1/dietlibc/libugly/gmtime_r.c
+++ /dev/null
@@ -1,35 +0,0 @@
-#include <time.h>
-
-/* seconds per day */
-#define SPD 24*60*60
-
-extern unsigned int __spm[];
-
-struct tm *gmtime_r(const time_t *timep, struct tm *r) {
- time_t i;
- register time_t work=*timep%(SPD);
- r->tm_sec=work%60; work/=60;
- r->tm_min=work%60; r->tm_hour=work/60;
- work=*timep/(SPD);
- r->tm_wday=(4+work)%7;
- for (i=1970; ; ++i) {
- register time_t k=__isleap(i)?366:365;
- if (work>k)
- work-=k;
- else
- break;
- }
- r->tm_year=i-1900;
- r->tm_yday=work;
-
- r->tm_mday=1;
- if (__isleap(i) && (work>58)) {
- if (work==59) r->tm_mday=2; /* 29.2. */
- work-=1;
- }
-
- for (i=11; i && __spm[i]>work; --i) ;
- r->tm_mon=i;
- r->tm_mday+=work-__spm[i];
- return r;
-}
diff --git a/mdk-stage1/dietlibc/libugly/isleap.c b/mdk-stage1/dietlibc/libugly/isleap.c
deleted file mode 100644
index dcfa1ced6..000000000
--- a/mdk-stage1/dietlibc/libugly/isleap.c
+++ /dev/null
@@ -1,6 +0,0 @@
-int __isleap(int year) {
- /* every fourth year is a leap year except for century years that are
- * not divisible by 400. */
-/* return (year % 4 == 0 && (year % 100 != 0 || year % 400 == 0)); */
- return (!(year%4) && ((year%100) || !(year%400)));
-}
diff --git a/mdk-stage1/dietlibc/libugly/localtime.c b/mdk-stage1/dietlibc/libugly/localtime.c
deleted file mode 100644
index 6fa6acf8a..000000000
--- a/mdk-stage1/dietlibc/libugly/localtime.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <time.h>
-
-struct tm* localtime(const time_t* t) {
- static struct tm tmp;
- return localtime_r(t,&tmp);
-}
diff --git a/mdk-stage1/dietlibc/libugly/localtime_r.c b/mdk-stage1/dietlibc/libugly/localtime_r.c
deleted file mode 100644
index d4bc073ce..000000000
--- a/mdk-stage1/dietlibc/libugly/localtime_r.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include "dietfeatures.h"
-#include <time.h>
-#include <sys/time.h>
-
-#ifdef WANT_TZFILE_PARSER
-extern void __maplocaltime();
-extern time_t __tzfile_map(time_t t, int *isdst);
-#endif
-
-struct tm* localtime_r(const time_t* t, struct tm* r) {
- time_t tmp;
-#ifdef WANT_TZFILE_PARSER
- __maplocaltime();
- tmp=__tzfile_map(*t,&r->tm_isdst);
-#else
- struct timezone tz;
- gettimeofday(0, &tz);
- tmp=*t-tz.tz_minuteswest*60L;
-#endif
- return gmtime_r(&tmp,r);
-}
diff --git a/mdk-stage1/dietlibc/libugly/logging.c b/mdk-stage1/dietlibc/libugly/logging.c
deleted file mode 100644
index 69c2c2337..000000000
--- a/mdk-stage1/dietlibc/libugly/logging.c
+++ /dev/null
@@ -1,211 +0,0 @@
-#include "dietfeatures.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <errno.h>
-#include <unistd.h>
-#include <asm/socket.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <string.h>
-#include <time.h>
-#include <sys/socket.h>
-#include <signal.h>
-
-#define _PATH_CONSOLE "/dev/console"
-#define BUF_SIZE 512 /* messagebuffer size (>= 200) */
-
-#define MAX_LOGTAG 80
-
-/* those have to be global *sigh* */
-static volatile int connected = 0; /* have done connect */
-static volatile int LogMask = 0xff; /* mask of priorities to be logged */
-static char LogTag[MAX_LOGTAG]; /* string to tag the entry with */
-static int LogFile = -1; /* fd for log */
-static int LogType = SOCK_DGRAM; /* type of socket connection */
-static int LogFacility = LOG_USER; /* default facility code */
-static int LogStat; /* status bits, set by openlog() */
-extern char *__progname; /* Program name, from crt0. */
-static struct sockaddr SyslogAddr; /* AF_UNIX address of local logger */
-
-static void closelog_intern(void)
-{
- if (!connected) return;
- close(LogFile);
- LogFile = -1;
- connected = 0;
-}
-
-void closelog(void)
-{
- closelog_intern();
-
- LogTag[0]=0;
- LogType = SOCK_DGRAM;
-}
-
-static void openlog_intern(int option, int facility)
-{
- LogStat = option;
- if (facility && ((facility & ~LOG_FACMASK) == 0))
- LogFacility = facility;
-
- /* yep, there is a continue inside ;) */
- while(1) {
- if (LogFile == -1) {
- SyslogAddr.sa_family = AF_UNIX;
- strncpy(SyslogAddr.sa_data, _PATH_LOG, sizeof(SyslogAddr.sa_data));
- if (LogStat & LOG_NDELAY)
- {
- if ((LogFile = socket(AF_UNIX, LogType, 0)) == -1) return;
- fcntl(LogFile, F_SETFD, 1);
- }
- }
- if ((LogFile != -1) && !connected) {
-#ifdef WANT_THREAD_SAFE
- int old_errno = (*(__errno_location()));
-#else
- int old_errno=errno;
-#endif
- if(connect(LogFile, &SyslogAddr, sizeof(SyslogAddr)) == -1) {
-#ifdef WANT_THREAD_SAFE
- int saved_errno = (*(__errno_location()));
-#else
- int saved_errno=errno;
-#endif
- close(LogFile);
- LogFile = -1;
- if((LogType == SOCK_DGRAM) && (saved_errno == EPROTOTYPE)) {
- /* retry with SOCK_STREAM instead of SOCK_DGRAM */
- LogType = SOCK_STREAM;
-#ifdef WANT_THREAD_SAFE
- (*(__errno_location()))=old_errno;
-#else
- errno=old_errno;
-#endif
- continue;
- }
- }
- else connected = 1;
- }
- break;
- }
-}
-
-/* has to be secured against multiple, simultanious call's in threaded environment */
-void openlog(const char *ident, int option, int facility)
-{
- if (ident) {
- strncpy(LogTag,ident,MAX_LOGTAG);
- LogTag[MAX_LOGTAG-1]=0;
- }
- openlog_intern(option, facility);
-}
-
-int setlogmask(int mask)
-{
- int old = LogMask;
- if (mask) LogMask = mask;
- return old;
-}
-
-void vsyslog(int priority, const char *format, va_list arg_ptr)
-{
- char buffer[BUF_SIZE];
- char time_buf[20];
- int buflen, headerlen;
- time_t now;
- struct tm now_tm;
- pid_t pid;
- int fd;
- int sigpipe;
- struct sigaction action, oldaction;
- struct sigaction *oldaction_ptr = NULL;
-#ifdef WANT_THREAD_SAFE
- int saved_errno = (*(__errno_location()));
-#else
- int saved_errno = errno;
-#endif
-
- /* check for invalid priority/facility bits */
- if (priority & ~(LOG_PRIMASK|LOG_FACMASK)) {
- syslog(LOG_ERR|LOG_CONS|LOG_PERROR|LOG_PID, "syslog: unknown facility/priorityority: %x", priority);
- priority &= LOG_PRIMASK|LOG_FACMASK;
- }
-
- /* check priority against setlogmask */
- if ((LOG_MASK(LOG_PRI(priority)) && LogMask) == 0) return;
-
- /* Set default facility if none specified. */
- if ((priority & LOG_FACMASK) == 0) priority |= LogFacility;
-
- pid = getpid();
- time(&now);
- strftime(time_buf, 20, "%h %e %T", localtime_r (&now, &now_tm));
-
- if (LogStat & LOG_PID)
- headerlen = snprintf(buffer, 130, "<%d>%s %s[%d]: ", priority, time_buf, LogTag, pid);
- else
- headerlen = snprintf(buffer, 130, "<%d>%s %s: ", priority, time_buf, LogTag);
-
- if (!LogTag[0]) {
- if ((LogStat & LOG_PID) != LOG_PID)
- headerlen = snprintf(buffer, 130, "<%d>%s (unknown)[%d]: ", priority, time_buf, pid);
- strcat(buffer+headerlen, "syslog without openlog w/ ident, please check code!");
- buflen = 41;
- }
- else {
-#ifdef WANT_THREAD_SAFE
- (*(__errno_location()))=saved_errno;
-#else
- errno=saved_errno;
-#endif
- buflen = vsnprintf(buffer+headerlen, BUF_SIZE - headerlen, format, arg_ptr);
- }
- if (LogStat & LOG_PERROR) {
- write(1, buffer+headerlen, buflen);
- if (buffer[headerlen+buflen] != '\n') write(1,"\n", 1);
- }
-
- /* prepare for broken connection */
- memset(&action, 0, sizeof(action));
- action.sa_handler = SIG_IGN;
- sigemptyset(&action.sa_mask);
-
- if ((sigpipe = sigaction (SIGPIPE, &action, &oldaction))==0)
- oldaction_ptr = &oldaction;
-
- if (!connected) openlog_intern(LogStat | LOG_NDELAY, 0);
-
- /* If we have a SOCK_STREAM connection, also send ASCII NUL as a
- * record terminator. */
- if (LogType == SOCK_STREAM) buflen++;
-
- if (!connected || (send(LogFile, buffer, buflen+headerlen, 0) != buflen+headerlen)) {
- if (LogType == SOCK_STREAM) buflen--;
- closelog_intern();
- /*
- * Output the message to the console; don't worry about blocking,
- * if console blocks everything will. Make sure the error reported
- * is the one from the syslogd failure.
- */
- if ((LogStat & LOG_CONS) &&
- ((fd = open(_PATH_CONSOLE, O_WRONLY|O_NOCTTY, 0)) >= 0))
- {
- write(fd, buffer, buflen+headerlen);
- write(fd, "\r\n", 2);
- }
- }
-
- if (sigpipe == 0)
- sigaction(SIGPIPE, &oldaction, (struct sigaction *) NULL);
-}
-
-void syslog(int priority, const char *format, ...)
-{
- va_list arg_ptr;
- va_start(arg_ptr, format);
- vsyslog(priority, format, arg_ptr);
- va_end(arg_ptr);
-}
diff --git a/mdk-stage1/dietlibc/libugly/mktime.c b/mdk-stage1/dietlibc/libugly/mktime.c
deleted file mode 100644
index ee4dab6c1..000000000
--- a/mdk-stage1/dietlibc/libugly/mktime.c
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <time.h>
-
-/* seconds per day */
-#define SPD 24*60*60
-
-extern unsigned int __spm[];
-
-time_t mktime(struct tm *t) {
- time_t x=0;
- unsigned int i;
- if (t->tm_year<70) return (time_t)(-1);
- for (i=70; i<t->tm_year; ++i) {
- x+=__isleap(i+1900)?366:365;
- }
- t->tm_yday=__spm[t->tm_mon] + t->tm_mday-1 + ((t->tm_mon>2) && __isleap(t->tm_year)?1:0);
- x+=t->tm_yday;
- /* x is now the number of days since Jan 1 1970 */
- t->tm_wday=(4+x)%7;
- x = x*SPD + t->tm_hour*60*60 + t->tm_min*60 + t->tm_sec;
- return x;
-}
diff --git a/mdk-stage1/dietlibc/libugly/pclose.c b/mdk-stage1/dietlibc/libugly/pclose.c
deleted file mode 100644
index e33076c19..000000000
--- a/mdk-stage1/dietlibc/libugly/pclose.c
+++ /dev/null
@@ -1,11 +0,0 @@
-#include <sys/types.h>
-#include <sys/wait.h>
-#include "dietstdio.h"
-
-int pclose(FILE *f) {
- int status;
- fclose(f);
- if (waitpid(f->popen_kludge,&status,0)>=0)
- return status;
- return -1;
-}
diff --git a/mdk-stage1/dietlibc/libugly/popen.c b/mdk-stage1/dietlibc/libugly/popen.c
deleted file mode 100644
index e0e441495..000000000
--- a/mdk-stage1/dietlibc/libugly/popen.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#include "dietstdio.h"
-#include <unistd.h>
-
-extern char **environ;
-
-FILE *popen(const char *command, const char *type) {
- int pfd[2];
- int fd0;
- pid_t pid;
- if (pipe(pfd)<0) return 0;
- fd0=(*type=='r');
- if ((pid=vfork())<0) {
- close(pfd[0]);
- close(pfd[1]);
- return 0;
- }
- if (!pid) { /* child */
- char *argv[]={"sh","-c",0,0};
- close(pfd[!fd0]); close(fd0);
- dup2(pfd[fd0],fd0); close(pfd[fd0]);
- argv[2]=(char*)command;
- execve("/bin/sh",argv,environ);
- _exit(255);
- }
- close(pfd[fd0]);
- {
- register FILE* f;
- if ((f=fdopen(pfd[!fd0],type)))
- f->popen_kludge=pid;
- return f;
- }
-}
diff --git a/mdk-stage1/dietlibc/libugly/prioritynames.c b/mdk-stage1/dietlibc/libugly/prioritynames.c
deleted file mode 100644
index 87a99b76d..000000000
--- a/mdk-stage1/dietlibc/libugly/prioritynames.c
+++ /dev/null
@@ -1,22 +0,0 @@
-#include <sys/syslog.h>
-
-#ifndef INTERNAL_NOPRI
-#define INTERNAL_NOPRI 0x10
-#endif
-
-CODE prioritynames[] =
- {
- { "alert", LOG_ALERT },
- { "crit", LOG_CRIT },
- { "debug", LOG_DEBUG },
- { "emerg", LOG_EMERG },
- { "err", LOG_ERR },
- { "error", LOG_ERR }, /* DEPRECATED */
- { "info", LOG_INFO },
- { "none", INTERNAL_NOPRI }, /* INTERNAL */
- { "notice", LOG_NOTICE },
- { "panic", LOG_EMERG }, /* DEPRECATED */
- { "warn", LOG_WARNING }, /* DEPRECATED */
- { "warning", LOG_WARNING },
- { 0, -1 }
- };
diff --git a/mdk-stage1/dietlibc/libugly/setenv.c b/mdk-stage1/dietlibc/libugly/setenv.c
deleted file mode 100644
index bf47cdb79..000000000
--- a/mdk-stage1/dietlibc/libugly/setenv.c
+++ /dev/null
@@ -1,17 +0,0 @@
-#include <string.h>
-#include <stdlib.h>
-
-#include <dietwarning.h>
-link_warning("setenv","setenv calls malloc. Avoid it in small programs.");
-
-int setenv(const char *name, const char *value, int overwrite) {
- char *c=malloc(strlen(name)+strlen(value)+3);
- if (getenv(name)) {
- if (!overwrite) return 0;
- unsetenv(name);
- }
- strcpy(c,name);
- strcat(c,"=");
- strcat(c,value);
- return putenv(c);
-}
diff --git a/mdk-stage1/dietlibc/libugly/setmntent.c b/mdk-stage1/dietlibc/libugly/setmntent.c
deleted file mode 100644
index a91d3902b..000000000
--- a/mdk-stage1/dietlibc/libugly/setmntent.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include <stdio.h>
-#include <mntent.h>
-
-FILE *setmntent(const char *filename, const char *type) {
- return fopen(filename,type);
-}
-
diff --git a/mdk-stage1/dietlibc/libugly/strftime.c b/mdk-stage1/dietlibc/libugly/strftime.c
deleted file mode 100644
index b7e750ab1..000000000
--- a/mdk-stage1/dietlibc/libugly/strftime.c
+++ /dev/null
@@ -1,182 +0,0 @@
-#include <sys/types.h>
-#include <time.h>
-
-static char *sweekdays[]={"Sun","Mon","Tue","Wed","Thu","Fri","Sat"};
-static char *weekdays[]={"Sunday","Monday","Tuesday","Wednesday","Thursday","Friday","Saturday"};
-static char *smonths[]={"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec"};
-static char *months[]={"January","February","March","April","May","June","July","August","September","October","November","December"};
-static char *ampm[]={"am","pm","AM","PM"};
-
-static int i2a(char* dest,unsigned int x) {
- register unsigned int tmp=x;
- register int len=0;
- *dest++=tmp/10+'0'; tmp=tmp%10; ++len;
- *dest++=tmp+'0';
- return 2;
-}
-
-static int i2as(char* dest,unsigned int x) {
- int len=i2a(dest,x);
- if (*dest=='0') *dest=' ';
- return len;
-}
-
-size_t strftime(char *s, size_t max, const char *format, const struct tm *tm) {
- char *t=s;
- const char *src;
- char buf[5];
- while (*format) {
- switch (*format) {
- case 0: break;
- case '%':
- switch (*++format) {
- case '%': *t='%'; ++t; break;
- case 'a': src=sweekdays[tm->tm_wday]; goto append;
- case 'A': src=weekdays[tm->tm_wday]; goto append;
- case 'h':
- case 'b': src=smonths[tm->tm_mon]; goto append;
- case 'B': src=months[tm->tm_mon]; goto append;
- case 'c': t+=strftime(t,max-(t-s),"%b %a %d %k:%M:%S %Z %Y",tm); break;
- case 'C': buf[i2a(buf,(tm->tm_year+1900)/100)]=0; src=buf; goto append;
- case 'd': buf[i2a(buf,tm->tm_mday)]=0; src=buf; goto append;
- case 'e': buf[i2as(buf,tm->tm_mday)]=0; src=buf; goto append;
- case 'H': buf[i2a(buf,tm->tm_hour)]=0; src=buf; goto append;
- case 'I': buf[i2a(buf,tm->tm_hour%12)]=0; src=buf; goto append;
- case 'j': buf[i2a(buf,tm->tm_yday)]=0; src=buf; goto append;
- case 'k': buf[i2as(buf,tm->tm_hour)]=0; src=buf; goto append;
- case 'l': buf[i2as(buf,tm->tm_hour%12)]=0; src=buf; goto append;
- case 'm': buf[i2a(buf,tm->tm_mon+1)]=0; src=buf; goto append;
- case 'M': buf[i2a(buf,tm->tm_min)]=0; src=buf; goto append;
- case 'n': *t='\n'; break;
- case 'p': src=ampm[tm->tm_hour>11?3:2]; goto append;
- case 'P': src=ampm[tm->tm_hour>11?1:0]; goto append;
- case 'r': t+=strftime(t,max-(t-s),"%I:%M:%S %p",tm); break;
- case 'R': t+=strftime(t,max-(t-s),"%H:%M",tm); break;
- case 'S': buf[i2a(buf,tm->tm_sec)]=0; src=buf; goto append;
- case 't': *t='\t'; break;
- case 'T': t+=strftime(t,max-(t-s),"%H:%M:%S",tm); break;
- case 'u': buf[i2a(buf,tm->tm_wday?tm->tm_wday:7)]=0; src=buf; goto append;
- case 'w': buf[i2a(buf,tm->tm_wday)]=0; src=buf; goto append;
- case 'x': t+=strftime(t,max-(t-s),"%b %a %d",tm); break;
- case 'X': t+=strftime(t,max-(t-s),"%k:%M:%S",tm); break;
- case 'y': buf[i2a(buf,tm->tm_year%100)]=0; src=buf; goto append;
- case 'Y': i2a(buf,(tm->tm_year+1900)/100); buf[i2a(buf+2,(tm->tm_year%100))+2]=0; src=buf; goto append;
- case 'Z': src="GMT"; goto append; /* hehe */
-append:
- while (*src && t<s+max) { *t=*src; ++t; ++src; }
- };
- break;
- default:
- *t=*format; ++t;
- }
- ++format;
- if (t>=s+max) break;
- continue;
- }
- *t=0; return t-s;
-}
-
-
-
-/*
- %u The day of the week as a decimal, range 1 to 7,
- Monday being 1. See also %w. (SU)
-
- %U The week number of the current year as a decimal
- number, range 00 to 53, starting with the first
- Sunday as the first day of week 01. See also %V and
- %W.
-
- %V The ISO 8601:1988 week number of the current year
- as a decimal number, range 01 to 53, where week 1
- is the first week that has at least 4 days in the
- current year, and with Monday as the first day of
- the week. See also %U and %W. (SU)
-
- %w The day of the week as a decimal, range 0 to 6,
- Sunday being 0. See also %u.
-
- %W The week number of the current year as a decimal
- number, range 00 to 53, starting with the first
- Monday as the first day of week 01.
-
- %x The preferred date representation for the current
- locale without the time.
-
- %X The preferred time representation for the current
- locale without the date.
-
- %y The year as a decimal number without a century
- (range 00 to 99).
-
- %Y The year as a decimal number including the century.
-
- %z The time-zone as hour offset from GMT. Required to
- emit RFC822-conformant dates (using "%a, %d %b %Y
- %H:%M:%S %z"). (GNU)
-
- %Z The time zone or name or abbreviation.
-
- %+ The date and time in date(1) format. (TZ)
-
- %% A literal `%' character.
-
- Some conversion specifiers can be modified by preceding
- them by the E or O modifier to indicate that an alterna­
- tive format should be used. If the alternative format or
- specification does not exist for the current locale, the
- behaviour will be as if the unmodified conversion specifi­
- cation were used. (SU) The Single Unix Specification men­
- tions %Ec, %EC, %Ex, %EX, %Ry, %EY, %Od, %Oe, %OH, %OI,
- %Om, %OM, %OS, %Ou, %OU, %OV, %Ow, %OW, %Oy, where the
- effect of the O modifier is to use alternative numeric
- symbols (say, roman numerals), and that of the E modifier
-
-
-
-GNU 29 March 1999 3
-
-
-
-
-
-STRFTIME(3) Linux Programmer's Manual STRFTIME(3)
-
-
- is to use a locale-dependent alternative representation.
-
- The broken-down time structure tm is defined in <time.h>.
- See also ctime(3).
-
-
-RETURN VALUE
- The strftime() function returns the number of characters
- placed in the array s, not including the terminating NUL
- character, provided the string, including the terminating
- NUL, fits. Otherwise, it returns 0, and the contents of
- the array is undefined. (Thus at least since libc 4.4.4;
- very old versions of libc, such as libc 4.4.1, would
- return max if the array was too small.)
-
- Note that the return value 0 does not necessarily indicate
- an error; for example, in many locales %p yields an empty
- string.
-
-ENVIRONMENT
- The environment variables TZ and LC_TIME are used.
-
-CONFORMING TO
- ANSI C, SVID 3, ISO 9899. There are strict inclusions
- between the set of conversions given in ANSI C (unmarked),
- those given in the Single Unix Specification (marked SU),
- those given in Olson's timezone package (marked TZ), and
- those given in glibc (marked GNU), except that %+ is not
- supported in glibc2. On the other hand glibc2 has several
- more extensions. POSIX.1 only refers to ANSI C; POSIX.2
- describes under date(1) several extensions that could
- apply to strftime as well.
-
-SEE ALSO
- date(1), time(2), ctime(3), setlocale(3), sprintf(3)
-
-*/
diff --git a/mdk-stage1/dietlibc/libugly/strsignal.c b/mdk-stage1/dietlibc/libugly/strsignal.c
deleted file mode 100644
index 54314d2c7..000000000
--- a/mdk-stage1/dietlibc/libugly/strsignal.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <signal.h>
-/* F....ng Kernel haeder is damn broken... */
-#ifndef _NSIG
-#define _NSIG 64
-#endif
-#include <asm/signal.h>
-
-char * strsignal(int sig) {
- if (sig==SIGHUP)
- return "Hangup";
- else if (sig==SIGINT)
- return "Interrupt";
- else if (sig==SIGQUIT)
- return "Quit";
- else if (sig==SIGILL)
- return "Illegal instruction";
- else if (sig==SIGTRAP)
- return "Trace/breakpoint trap";
- else if (sig==SIGABRT)
- return "Aborted";
- else if (sig==SIGFPE)
- return "Floating point exception";
- else if (sig==SIGKILL)
- return "Killed";
- else if (sig==SIGBUS)
- return "Bus error";
- else if (sig==SIGSEGV)
- return "Segmentation fault";
- else if (sig==SIGPIPE)
- return "Broken pipe";
- else if (sig==SIGALRM)
- return "Alarm clock";
- else if (sig==SIGTERM)
- return "Terminated";
- else if (sig==SIGURG)
- return "Urgent I/O condition";
- else if (sig==SIGSTOP)
- return "Stopped (signal)";
- else if (sig==SIGTSTP)
- return "Stopped";
- else if (sig==SIGCONT)
- return "Continue";
- else if (sig==SIGCHLD)
- return "Child exited";
- else if (sig==SIGTTIN)
- return "Stopped (tty input)";
- else if (sig==SIGTTOU)
- return "Stopped (tty output)";
- else if (sig==SIGIO)
- return "I/O possible";
- else if (sig==SIGXCPU)
- return "CPU time limit exceeded";
- else if (sig==SIGXFSZ)
- return "File size limit exceeded";
- else if (sig==SIGVTALRM)
- return "Virtual timer expired";
- else if (sig==SIGPROF)
- return "Profiling timer expired";
- else if (sig==SIGWINCH)
- return "Window changed";
- else if (sig==SIGUSR1)
- return "User defined signal 1";
- else if (sig==SIGUSR2)
- return "User defined signal 1";
-#ifdef SIGEMT
- else if (sig==SIGEMT)
- return "EMT trap";
-#endif
-#ifdef SIGSYS
- else if (sig==SIGSYS)
- return "Bad system call";
-#endif
-#ifdef SIGSTKFLT
- else if (sig==SIGSTKFLT)
- return "Stack fault";
-#endif
-#ifdef SIGINFO
- else if (sig==SIGINFO)
- return "Information request";
-#elif defined(SIGPWR) && (!defined(SIGLOST) || (SIGPWR!=SIGLOST))
- else if (sig==SIGPWR)
- return "Power falure";
-#endif
-#ifdef SIGLOST
- else if (sig==SIGLOST)
- return "Resource lost";
-#endif
- else if ((sig>=SIGRTMIN)&&(sig<=SIGRTMAX))
- return "Real time signal";
- else
- return "(unknown signal)";
-}
diff --git a/mdk-stage1/dietlibc/libugly/system.c b/mdk-stage1/dietlibc/libugly/system.c
deleted file mode 100644
index b9eea20eb..000000000
--- a/mdk-stage1/dietlibc/libugly/system.c
+++ /dev/null
@@ -1,69 +0,0 @@
-#include <signal.h>
-#include <asm/errno.h>
-#include <errno.h>
-#include <unistd.h>
-#include "dietwarning.h"
-
-#define SHELL_PATH "/bin/sh" /* Path of the shell. */
-#define SHELL_NAME "sh" /* Name to give it. */
-
-extern char **environ;
-
-int __libc_fork();
-int __libc_waitpid(int pid, int *status, int options);
-int execve(const char*filename, char *const argv[], char *const envp[]);
-void __set_errno(int errno);
-int sigaction(int signum, const struct sigaction *act, struct sigaction *oldact);
-
-int __libc_system (const char *line)
-{
- struct sigaction sa, intr, quit;
- int save,pid,ret=-1;
-
- if (line == 0) return __libc_system("exit 0") == 0;
-
- sa.sa_handler = SIG_IGN;
- sa.sa_flags = 0;
- sigemptyset (&sa.sa_mask);
-
- if (sigaction(SIGINT, &sa, &intr)<0) return -1;
- if (sigaction(SIGQUIT, &sa, &quit)<0) {
- save = errno;
- sigaction (SIGINT, &intr, (struct sigaction*)0);
- __set_errno (save);
- return -1;
- }
-
- pid=__libc_fork();
- if (pid>0)
- { /* parent */
- int n;
- do
- n=__libc_waitpid(pid, &ret, 0);
- while ((n==-1) && (errno==EINTR));
- if (n!=pid) ret=-1;
- }
- else if (!pid)
- { /* child */
- const char *nargs[4];
- nargs[0] = SHELL_NAME;
- nargs[1] = "-c";
- nargs[2] = line;
- nargs[3] = 0;
-
- sigaction(SIGINT, &intr, (struct sigaction*)0);
- sigaction(SIGQUIT, &quit, (struct sigaction*)0);
-
- execve(SHELL_PATH,(char *const *)nargs, environ);
- _exit(127);
- }
- save = errno;
- sigaction (SIGINT, &intr, (struct sigaction *)0);
- sigaction (SIGQUIT, &quit, (struct sigaction *)0);
- __set_errno(save);
- return ret;
-}
-
-int system (const char *line) __attribute__((weak,alias("__libc_system")));
-
-link_warning("system","warning: system() is a security risk. Use fork and execvp instead!")
diff --git a/mdk-stage1/dietlibc/libugly/time_table_spd.c b/mdk-stage1/dietlibc/libugly/time_table_spd.c
deleted file mode 100644
index bfe1cf86d..000000000
--- a/mdk-stage1/dietlibc/libugly/time_table_spd.c
+++ /dev/null
@@ -1,17 +0,0 @@
-
-/* seconds per month -- nonleap! */
-const unsigned int __spm[12] =
- { 0,
- (31),
- (31+28),
- (31+28+31),
- (31+28+31+30),
- (31+28+31+30+31),
- (31+28+31+30+31+30),
- (31+28+31+30+31+30+31),
- (31+28+31+30+31+30+31+31),
- (31+28+31+30+31+30+31+31+30),
- (31+28+31+30+31+30+31+31+30+31),
- (31+28+31+30+31+30+31+31+30+31+30),
- };
-
diff --git a/mdk-stage1/dietlibc/libugly/tzfile.c b/mdk-stage1/dietlibc/libugly/tzfile.c
deleted file mode 100644
index 5702d4bea..000000000
--- a/mdk-stage1/dietlibc/libugly/tzfile.c
+++ /dev/null
@@ -1,86 +0,0 @@
-#include "dietfeatures.h"
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <netinet/in.h>
-
-#include <stdio.h>
-
-#ifdef WANT_TZFILE_PARSER
-static char *tzfile=0;
-static int tzlen=-1;
-
-void __maplocaltime() {
- int fd;
- unsigned int len;
- if (tzlen>=0) return;
- tzlen=0;
- if ((fd=open("/etc/localtime",O_RDONLY))<0) return;
- len=lseek(fd,0,SEEK_END);
- if ((tzfile=mmap(0,len,PROT_READ,MAP_SHARED,fd,0))==MAP_FAILED) return;
- close(fd);
- if (ntohl(*(int*)tzfile) != 0x545a6966) return;
- tzlen=len;
-}
-
-char *tzset(void) __attribute__((weak,alias("__maplocaltime")));
-
-static unsigned long __myntohl(const unsigned char* c) {
- return (((unsigned long)c[0])<<24) +
- (((unsigned long)c[1])<<16) +
- (((unsigned long)c[2])<<8) +
- ((unsigned long)c[3]);
-}
-
-time_t __tzfile_map(time_t t, int *isdst) {
- /* "TZif" plus 16 reserved bytes. */
- char *tmp;
- int i;
- int tzh_ttisgmtcnt, tzh_ttisstdcnt, tzh_leapcnt, tzh_timecnt, tzh_typecnt, tzh_charcnt;
- *isdst=0;
- if (!tzfile) return t;
- tzh_ttisgmtcnt=ntohl(*(int*)(tzfile+20));
- tzh_ttisstdcnt=ntohl(*(int*)(tzfile+24));
- tzh_leapcnt=ntohl(*(int*)(tzfile+28));
- tzh_timecnt=ntohl(*(int*)(tzfile+32));
- tzh_typecnt=ntohl(*(int*)(tzfile+36));
- tzh_charcnt=ntohl(*(int*)(tzfile+40));
-
-#if 0
- tmp=tzfile+20+6*4;
- printf("ttisgmtcnt %d ttisstdcnt %d leapcnt %d timecnt %d typecnt %d charcnt %d\n",tzh_ttisgmtcnt,tzh_ttisstdcnt, tzh_leapcnt, tzh_timecnt, tzh_typecnt, tzh_charcnt);
- printf("transition times: ");
- for (i=0; i<tzh_timecnt; ++i) {
- printf("%s%lu",i?", ":"",ntohl(*(int*)tmp)); tmp+=4;
- }
- printf("\n");
- printf("indices: ");
- for (i=0; i<tzh_timecnt; ++i) {
- printf("%s%d",i?", ":"",*tmp); ++tmp;
- }
- printf("\n");
- printf("transition times: ");
- for (i=0; i<tzh_typecnt; ++i) {
- printf("%s(%lu,%d,%d)",i?", ":"",ntohl(*(int*)tmp),tmp[4],tmp[5]); tmp+=6;
- }
- printf("\n");
-#endif
-
- tmp=tzfile+20+6*4;
- for (i=0; i<tzh_timecnt; ++i)
- if ((time_t)__myntohl(tmp+i*4) >= t) {
-/* printf("match at %d\n",i); */
- tmp+=tzh_timecnt*4;
- i=tmp[i-1];
-/* printf("using index %d\n",i); */
- tmp+=tzh_timecnt;
- tmp+=i*6;
-/* printf("(%lu,%d,%d)\n",ntohl(*(int*)tmp),tmp[4],tmp[5]); */
- *isdst=tmp[4];
- return t+__myntohl(tmp);
- }
- return t;
-}
-#else
-void tzset(void) __attribute__((weak,alias("return0")));
-#endif
diff --git a/mdk-stage1/dietlibc/libugly/unsetenv.c b/mdk-stage1/dietlibc/libugly/unsetenv.c
deleted file mode 100644
index 46e880271..000000000
--- a/mdk-stage1/dietlibc/libugly/unsetenv.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <stdlib.h>
-
-void unsetenv(const char *name) {
- putenv(name);
-}
-
diff --git a/mdk-stage1/dietlibc/ppc/Makefile.add b/mdk-stage1/dietlibc/ppc/Makefile.add
deleted file mode 100644
index 641cf1ade..000000000
--- a/mdk-stage1/dietlibc/ppc/Makefile.add
+++ /dev/null
@@ -1,3 +0,0 @@
-
-CFLAGS+=-mpowerpc-gpopt -mpowerpc-gfxopt -Os
-VPATH:=ppc:syscalls.s:$(VPATH)
diff --git a/mdk-stage1/dietlibc/ppc/__longjmp.S b/mdk-stage1/dietlibc/ppc/__longjmp.S
deleted file mode 100644
index 8113eeeea..000000000
--- a/mdk-stage1/dietlibc/ppc/__longjmp.S
+++ /dev/null
@@ -1,59 +0,0 @@
-#include <setjmp.h>
-
-
-#ifdef PIC
-#define JUMPTARGET(name) name##@plt
-#else
-#define JUMPTARGET(name) name
-#endif
-
-.global __longjmp
-.type __longjmp,@function
-.align 2
-__longjmp:
- lwz 1,(JB_GPR1*4)(3)
- lwz 2,(JB_GPR2*4)(3)
- lwz 0,(JB_LR*4)(3)
- lwz 14,((JB_GPRS+0)*4)(3)
- lfd 14,((JB_FPRS+0*2)*4)(3)
- lwz 15,((JB_GPRS+1)*4)(3)
- lfd 15,((JB_FPRS+1*2)*4)(3)
- lwz 16,((JB_GPRS+2)*4)(3)
- lfd 16,((JB_FPRS+2*2)*4)(3)
- lwz 17,((JB_GPRS+3)*4)(3)
- lfd 17,((JB_FPRS+3*2)*4)(3)
- lwz 18,((JB_GPRS+4)*4)(3)
- lfd 18,((JB_FPRS+4*2)*4)(3)
- lwz 19,((JB_GPRS+5)*4)(3)
- lfd 19,((JB_FPRS+5*2)*4)(3)
- lwz 20,((JB_GPRS+6)*4)(3)
- lfd 20,((JB_FPRS+6*2)*4)(3)
- mtlr 0
- lwz 21,((JB_GPRS+7)*4)(3)
- lfd 21,((JB_FPRS+7*2)*4)(3)
- lwz 22,((JB_GPRS+8)*4)(3)
- lfd 22,((JB_FPRS+8*2)*4)(3)
- lwz 0,(JB_CR*4)(3)
- lwz 23,((JB_GPRS+9)*4)(3)
- lfd 23,((JB_FPRS+9*2)*4)(3)
- lwz 24,((JB_GPRS+10)*4)(3)
- lfd 24,((JB_FPRS+10*2)*4)(3)
- lwz 25,((JB_GPRS+11)*4)(3)
- lfd 25,((JB_FPRS+11*2)*4)(3)
- mtcrf 0xFF,0
- lwz 26,((JB_GPRS+12)*4)(3)
- lfd 26,((JB_FPRS+12*2)*4)(3)
- lwz 27,((JB_GPRS+13)*4)(3)
- lfd 27,((JB_FPRS+13*2)*4)(3)
- lwz 28,((JB_GPRS+14)*4)(3)
- lfd 28,((JB_FPRS+14*2)*4)(3)
- lwz 29,((JB_GPRS+15)*4)(3)
- lfd 29,((JB_FPRS+15*2)*4)(3)
- lwz 30,((JB_GPRS+16)*4)(3)
- lfd 30,((JB_FPRS+16*2)*4)(3)
- lwz 31,((JB_GPRS+17)*4)(3)
- lfd 31,((JB_FPRS+17*2)*4)(3)
- mr 3,4
- blr
-.size __longjmp,.-__longjmp
-
diff --git a/mdk-stage1/dietlibc/ppc/__testandset.S b/mdk-stage1/dietlibc/ppc/__testandset.S
deleted file mode 100644
index a6063fbb2..000000000
--- a/mdk-stage1/dietlibc/ppc/__testandset.S
+++ /dev/null
@@ -1,11 +0,0 @@
-.global __testandset
-.type __testandset,@function
-.align 2
-__testandset:
- lwarx 5,0,3
- add 0,4,5
- stwcx 0,0,3
- bne __testandset
- blr
-.size __testandset,.-__testandset
-
diff --git a/mdk-stage1/dietlibc/ppc/mmap.c b/mdk-stage1/dietlibc/ppc/mmap.c
deleted file mode 100644
index 25d2926b2..000000000
--- a/mdk-stage1/dietlibc/ppc/mmap.c
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <linux/types.h>
-#include <linux/unistd.h>
-
-int mmap(void*start,size_t length,int prot,int flags,int fd,off_t offset) {
- unsigned long __sc_ret, __sc_err;
- {
- register unsigned long __sc_0 __asm__ ("r0");
- register unsigned long __sc_3 __asm__ ("r3");
- register unsigned long __sc_4 __asm__ ("r4");
- register unsigned long __sc_5 __asm__ ("r5");
- register unsigned long __sc_6 __asm__ ("r6");
- register unsigned long __sc_7 __asm__ ("r7");
- register unsigned long __sc_8 __asm__ ("r8");
-
- __sc_3 = (unsigned long) (start);
- __sc_4 = (unsigned long) (length);
- __sc_5 = (unsigned long) (prot);
- __sc_6 = (unsigned long) (flags);
- __sc_7 = (unsigned long) (fd);
- __sc_8 = (unsigned long) (offset);
- __sc_0 = __NR_mmap;
- __asm__ __volatile__
- ("sc \n\t"
- "mfcr %1 "
- : "=&r" (__sc_3), "=&r" (__sc_0)
- : "0" (__sc_3), "1" (__sc_0),
- "r" (__sc_4),
- "r" (__sc_5),
- "r" (__sc_6),
- "r" (__sc_7),
- "r" (__sc_8)
- : __syscall_clobbers);
- __sc_ret = __sc_3;
- __sc_err = __sc_0;
- }
- __syscall_return (int);
-}
diff --git a/mdk-stage1/dietlibc/ppc/setjmp.S b/mdk-stage1/dietlibc/ppc/setjmp.S
deleted file mode 100644
index 50fa2bdd4..000000000
--- a/mdk-stage1/dietlibc/ppc/setjmp.S
+++ /dev/null
@@ -1,56 +0,0 @@
-#include <setjmp.h>
-
-#ifdef PIC
-#define JUMPTARGET(name) name##@plt
-#else
-#define JUMPTARGET(name) name
-#endif
-
-.global __sigsetjmp
-.type __sigsetjmp,@function
-.align 2
-__sigsetjmp:
- stw 1,(JB_GPR1*4)(3)
- mflr 0
- stw 2,(JB_GPR2*4)(3)
- stw 14,((JB_GPRS+0)*4)(3)
- stfd 14,((JB_FPRS+0*2)*4)(3)
- stw 0,(JB_LR*4)(3)
- stw 15,((JB_GPRS+1)*4)(3)
- stfd 15,((JB_FPRS+1*2)*4)(3)
- mfcr 0
- stw 16,((JB_GPRS+2)*4)(3)
- stfd 16,((JB_FPRS+2*2)*4)(3)
- stw 0,(JB_CR*4)(3)
- stw 17,((JB_GPRS+3)*4)(3)
- stfd 17,((JB_FPRS+3*2)*4)(3)
- stw 18,((JB_GPRS+4)*4)(3)
- stfd 18,((JB_FPRS+4*2)*4)(3)
- stw 19,((JB_GPRS+5)*4)(3)
- stfd 19,((JB_FPRS+5*2)*4)(3)
- stw 20,((JB_GPRS+6)*4)(3)
- stfd 20,((JB_FPRS+6*2)*4)(3)
- stw 21,((JB_GPRS+7)*4)(3)
- stfd 21,((JB_FPRS+7*2)*4)(3)
- stw 22,((JB_GPRS+8)*4)(3)
- stfd 22,((JB_FPRS+8*2)*4)(3)
- stw 23,((JB_GPRS+9)*4)(3)
- stfd 23,((JB_FPRS+9*2)*4)(3)
- stw 24,((JB_GPRS+10)*4)(3)
- stfd 24,((JB_FPRS+10*2)*4)(3)
- stw 25,((JB_GPRS+11)*4)(3)
- stfd 25,((JB_FPRS+11*2)*4)(3)
- stw 26,((JB_GPRS+12)*4)(3)
- stfd 26,((JB_FPRS+12*2)*4)(3)
- stw 27,((JB_GPRS+13)*4)(3)
- stfd 27,((JB_FPRS+13*2)*4)(3)
- stw 28,((JB_GPRS+14)*4)(3)
- stfd 28,((JB_FPRS+14*2)*4)(3)
- stw 29,((JB_GPRS+15)*4)(3)
- stfd 29,((JB_FPRS+15*2)*4)(3)
- stw 30,((JB_GPRS+16)*4)(3)
- stfd 30,((JB_FPRS+16*2)*4)(3)
- stw 31,((JB_GPRS+17)*4)(3)
- stfd 31,((JB_FPRS+17*2)*4)(3)
- b JUMPTARGET (__sigjmp_save)
-.size __sigsetjmp,.-__sigsetjmp
diff --git a/mdk-stage1/dietlibc/ppc/start.S b/mdk-stage1/dietlibc/ppc/start.S
deleted file mode 100644
index c7afeecd2..000000000
--- a/mdk-stage1/dietlibc/ppc/start.S
+++ /dev/null
@@ -1,44 +0,0 @@
-#include "start.h"
-
-#ifdef __powerpc__
-
-.text
-.global _start
-.type _start,@function
-_start:
- /* Save the stack pointer, in case we're statically linked under Linux. */
- mr 9,1
- /* Set up an initial stack frame, and clear the LR. */
- clrrwi 1,1,4
- li 0,0
- stwu 1,-16(1)
- mtlr 0
- stw 0,0(1)
-
- /* r9 enthält den initialen Stackpointer.
- argc = (r9)
- argv = (r9+4)
- envp = argv+(argc+1)*4 */
-
- lwzu 3,0(9) /* argc */
- addi 4,9,4 /* argv */
- add 5,0,3 /* argc... */
- addi 5,5,1 /* argc+1...*/
- slwi 5,5,2 /* (argc+1)*4 */
- add 5,5,4 /* argv+(argc+1)*4 */
-
- lis 6,environ@ha
- stw 5,environ@l(6)
-
- bl main
- b exit
-.size _start,.-_start
-
-
-/* Define a symbol for the first piece of initialized data. */
- .section ".data"
-__data_start:
-
-
-#endif
-
diff --git a/mdk-stage1/dietlibc/ppc/unified.S b/mdk-stage1/dietlibc/ppc/unified.S
deleted file mode 100644
index d2b419f0b..000000000
--- a/mdk-stage1/dietlibc/ppc/unified.S
+++ /dev/null
@@ -1,21 +0,0 @@
-#include <dietfeatures.h>
-
-.text
-.global __unified_syscall
-__unified_syscall:
- sc
- mfcr 0
- andis. 9,0,4096
- mr 0,3
- beq .L1
-#ifdef WANT_THREAD_SAVE
- bl __set_errno
-#else
- lis 9,errno@ha
- stw 3,errno@l(9)
-#endif
- li 0,-1
-.L1:
- mr 3,0
- blr
-
diff --git a/mdk-stage1/dietlibc/sparc/Makefile.add b/mdk-stage1/dietlibc/sparc/Makefile.add
deleted file mode 100644
index 0de05b1db..000000000
--- a/mdk-stage1/dietlibc/sparc/Makefile.add
+++ /dev/null
@@ -1,3 +0,0 @@
-
-CFLAGS+=-mcpu=supersparc -Os
-VPATH:=sparc:syscalls.s:$(VPATH)
diff --git a/mdk-stage1/dietlibc/sparc/__longjmp.S b/mdk-stage1/dietlibc/sparc/__longjmp.S
deleted file mode 100644
index 72e001a2f..000000000
--- a/mdk-stage1/dietlibc/sparc/__longjmp.S
+++ /dev/null
@@ -1,67 +0,0 @@
-#include <setjmp.h>
-
-#define JB_SP 0
-#define JB_FP 1
-#define JB_PC 2
-
-#define ENV(base,reg) [%base + (reg * 4)]
-#define ST_FLUSH_WINDOWS 3
-#define RW_FP [%fp + 0x48]
-
-.text
-.global __longjmp
-__longjmp:
- /* Store our arguments in global registers so we can still
- use them while unwinding frames and their register windows. */
-
- ld ENV(o0,JB_FP), %g3 /* Cache target FP in register %g3. */
- mov %o0, %g1 /* ENV in %g1 */
- orcc %o1, %g0, %g2 /* VAL in %g2 */
- be,a 0f /* Branch if zero; else skip delay slot. */
- mov 1, %g2 /* Delay slot only hit if zero: VAL = 1. */
-0:
- xor %fp, %g3, %o0
- add %fp, 512, %o1
- andncc %o0, 4095, %o0
- bne .Lthread
- cmp %o1, %g3
- bl .Lthread
-
- /* Now we will loop, unwinding the register windows up the stack
- until the restored %fp value matches the target value in %g3. */
-
-.Lloop:
- cmp %fp, %g3 /* Have we reached the target frame? */
- bl,a .Lloop /* Loop while current fp is below target. */
- restore /* Unwind register window in delay slot. */
- be,a .Lfound /* Better have hit it exactly. */
- ld ENV(g1,JB_SP), %o0 /* Delay slot: extract target SP. */
-
-.Lthread:
- /*
- * Do a "flush register windows trap". The trap handler in the
- * kernel writes all the register windows to their stack slots, and
- * marks them all as invalid (needing to be sucked up from the
- * stack when used). This ensures that all information needed to
- * unwind to these callers is in memory, not in the register
- * windows.
- */
- ta ST_FLUSH_WINDOWS
- ld ENV(g1,JB_PC), %o7 /* Set return PC. */
- ld ENV(g1,JB_SP), %fp /* Set saved SP on restore below. */
- sub %fp, 64, %sp /* Allocate a register frame. */
- st %g3, RW_FP /* Set saved FP on restore below. */
- retl
- restore %g2, 0, %o0 /* Restore values from above register frame. */
-
-.Lfound:
- /* We have unwound register windows so %fp matches the target. */
- mov %o0, %sp /* OK, install new SP. */
-
-.Lsp_ok:
- ld ENV(g1,JB_PC), %o0 /* Extract target return PC. */
- jmp %o0 + 8 /* Return there. */
- mov %g2, %o0 /* Delay slot: set return value. */
-
-.size __longjmp, . - __longjmp
-
diff --git a/mdk-stage1/dietlibc/sparc/__testandset.S b/mdk-stage1/dietlibc/sparc/__testandset.S
deleted file mode 100644
index 84f6cf597..000000000
--- a/mdk-stage1/dietlibc/sparc/__testandset.S
+++ /dev/null
@@ -1,6 +0,0 @@
-.text
-.align 4
-.global __testandset
-__testandset:
- retl
- ldstub [%o0], %o0
diff --git a/mdk-stage1/dietlibc/sparc/clone.S b/mdk-stage1/dietlibc/sparc/clone.S
deleted file mode 100644
index 58b438249..000000000
--- a/mdk-stage1/dietlibc/sparc/clone.S
+++ /dev/null
@@ -1,45 +0,0 @@
-#include <asm/errno.h>
-#include <asm/unistd.h>
-
-.text
-.align 4
-.weak clone
-clone:
-.global __clone
-__clone:
- save %sp, -96, %sp
-
- tst %i0 /* check for function pointer */
- be .Lerror
- tst %i1 /* check for stack pointer */
- be .Lerror
- nop
-
- mov %i1, %o1 /* child-stack */
- mov %i2, %o0 /* clone-flags */
- mov __NR_clone, %g1
- ta 0x10 /* syscall: clone */
- bcs .Lerror
-
- tst %o1
- bne .Lstart /* we are the child :) */
- nop
- mov %o0, %i0 /* return child pid */
- ret
- restore
-
-.Lerror:
- call __errno_location
- nop
- mov EINVAL, %l0
- st %l0, [%o0]
- ret
- restore %g0, -1, %o0
-
-.Lstart:
- call %i0 /* call child-function */
- mov %i3, %o0 /* put arg in the right place for the child */
-
- call _exit /* child returned */
- nop
-
diff --git a/mdk-stage1/dietlibc/sparc/fork.S b/mdk-stage1/dietlibc/sparc/fork.S
deleted file mode 100644
index 869c9b30c..000000000
--- a/mdk-stage1/dietlibc/sparc/fork.S
+++ /dev/null
@@ -1,25 +0,0 @@
-#include "syscalls.h"
-
-.text
-.weak fork
-fork:
-.global __libc_fork
-__libc_fork:
- mov 2, %g1
- ta 0x10
- bcc,a 1f
- nop
- save %sp, -96, %sp
-#ifdef WANT_THREAD_SAVE
- call __errno_location
- nop
-#else
- sethi %hi(errno), %o0
- or %o0, %lo(errno), %o0
-#endif
- st %i0, [ %o0 ]
- retl
- restore %g0, -1, %o0
-1: dec %o1
- retl
- and %o0, %o1, %o0
diff --git a/mdk-stage1/dietlibc/sparc/mmap.c b/mdk-stage1/dietlibc/sparc/mmap.c
deleted file mode 100644
index 25ebdc24e..000000000
--- a/mdk-stage1/dietlibc/sparc/mmap.c
+++ /dev/null
@@ -1,43 +0,0 @@
-#include <linux/types.h>
-#include <linux/unistd.h>
-
-#define __SYSCALL_STRING \
- "ta 0x10;" \
- "bcs 2f;" \
- " nop;" \
- "1:" \
- ".subsection 2;" \
- "2:" \
- "save %%sp, -192, %%sp;" \
- "call __errno_location;" \
- " nop;" \
- "st %%i0,[%%o0];" \
- "ba 1b;" \
- " restore %%g0, -1, %%o0;" \
- ".previous;"
-
-#define __SYSCALL_CLOBBERS "g2", "g3", "g4", "g5", "g7", \
- "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \
- "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \
- "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", \
- "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", \
- "cc", "memory"
-
-#define inline_syscall6(name,arg1,arg2,arg3,arg4,arg5,arg6) \
-({ \
- register long __o0 __asm__ ("o0") = (long)(arg1); \
- register long __o1 __asm__ ("o1") = (long)(arg2); \
- register long __o2 __asm__ ("o2") = (long)(arg3); \
- register long __o3 __asm__ ("o3") = (long)(arg4); \
- register long __o4 __asm__ ("o4") = (long)(arg5); \
- register long __o5 __asm__ ("o5") = (long)(arg6); \
- register long __g1 __asm__ ("g1") = __NR_##name; \
- __asm__ (__SYSCALL_STRING : "=r" (__g1), "=r" (__o0) : \
- "0" (__g1), "1" (__o0), "r" (__o1), "r" (__o2), \
- "r" (__o3), "r" (__o4), "r" (__o5) : \
- __SYSCALL_CLOBBERS); \
- __o0; \
-})
-int mmap(void*start,size_t length,int prot,int flags,int fd,off_t offset) {
- return inline_syscall6(mmap,start,length,prot,flags,fd,offset);
-}
diff --git a/mdk-stage1/dietlibc/sparc/pipe.S b/mdk-stage1/dietlibc/sparc/pipe.S
deleted file mode 100644
index 820da2570..000000000
--- a/mdk-stage1/dietlibc/sparc/pipe.S
+++ /dev/null
@@ -1,26 +0,0 @@
-#include "syscalls.h"
-
-.text
-.global pipe
-pipe:
- mov %o0, %o2
- mov __NR_pipe, %g1
- ta 0x10
- bcc,a 1f
- nop
- save %sp, -96, %sp
-#ifdef WANT_THREAD_SAVE
- call __errno_location
- nop
-#else
- sethi %hi(errno), %o0
- or %o0, %lo(errno), %o0
-#endif
- st %i0, [ %o0 ]
- ret
- restore %g0, -1, %o0
-
-1: st %o0, [ %o2 ]
- st %o1, [ %o2 + 4 ]
- retl
- mov %g0, %o0
diff --git a/mdk-stage1/dietlibc/sparc/setjmp.S b/mdk-stage1/dietlibc/sparc/setjmp.S
deleted file mode 100644
index efc5a7013..000000000
--- a/mdk-stage1/dietlibc/sparc/setjmp.S
+++ /dev/null
@@ -1,37 +0,0 @@
-#include <setjmp.h>
-
-#define JB_SP 0
-#define JB_FP 1
-#define JB_PC 2
-
-#define ST_FLUSH_WINDOWS 0x03
-
-.section .rodata
-.text
-.globl __setjmp
-__setjmp:
- b 1f
- set 0, %o1
-.size __setjmp,.-__setjmp
-
-.globl setjmp
-setjmp:
- set 1, %o1
-.size setjmp,.-setjmp
-
-.globl __sigsetjmp
-__sigsetjmp:
-1:
- /* Save our PC, SP and FP. Save the signal mask if requested with
- a tail-call for simplicity; it always returns zero. */
- ta ST_FLUSH_WINDOWS
-
- st %o7, [%o0 + (JB_PC * 4)]
- st %sp, [%o0 + (JB_SP * 4)]
- st %fp, [%o0 + (JB_FP * 4)]
-
- mov %o7, %g1
- call __sigjmp_save
- mov %g1, %o7
-.size __sigsetjmp,.-__sigsetjmp
-
diff --git a/mdk-stage1/dietlibc/sparc/shmat.c b/mdk-stage1/dietlibc/sparc/shmat.c
deleted file mode 100644
index 73b2d89a9..000000000
--- a/mdk-stage1/dietlibc/sparc/shmat.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <asm/ipc.h>
-
-extern void* __ipc();
-
-#ifndef PAGE_SIZE
-#define PAGE_SIZE 4096
-#endif
-
-void* shmat(int shmid,const void* shmaddr,int shmflg) {
- void* raddr;
- register void* result;
- result=__ipc(SHMAT,shmid,shmflg,&raddr,shmaddr);
- if ((unsigned long)result <= -(unsigned long)PAGE_SIZE)
- result=raddr;
- return result;
-}
diff --git a/mdk-stage1/dietlibc/sparc/start.S b/mdk-stage1/dietlibc/sparc/start.S
deleted file mode 100644
index e948aaddc..000000000
--- a/mdk-stage1/dietlibc/sparc/start.S
+++ /dev/null
@@ -1,46 +0,0 @@
-#include "start.h"
-
-#ifdef __sparc__
- .section ".text"
- .align 4
- .global _start
- .type _start,@function
-_start:
-
- /* Terminate the stack frame, and reserve space for functions to
- drop their arguments. */
- mov %g0, %fp
- sub %sp, 6*4, %sp
-
- /* Extract the arguments and environment as encoded on the stack. The
- argument info starts after one register window (16 words) past the SP. */
- ld [%sp+22*4], %o0
- add %sp, 23*4, %o1
- add %o1, %o0, %o2
- add %o2, %o0, %o2
- add %o2, %o0, %o2
- add %o2, %o0, %o2
- add %o2, 4, %o2
-
- sethi %hi(environ), %o3
- or %o3, %lo(environ), %o3
- st %o2, [%o3]
-
- /* When starting a binary via the dynamic linker, %g1 contains the
- address of the shared library termination function, which will be
- registered with atexit(). If we are statically linked, this will
- be NULL. */
-
- /* Let libc do the rest of the initialization, and call main. */
- call main
- mov %g1, %o5
-
- b exit
- mov %o0, %i0
-
- /* Die very horribly if exit returns. */
- unimp
-
- .size _start, .-_start
-#endif
-
diff --git a/mdk-stage1/dietlibc/sparc/udiv.S b/mdk-stage1/dietlibc/sparc/udiv.S
deleted file mode 100644
index 87479e7bd..000000000
--- a/mdk-stage1/dietlibc/sparc/udiv.S
+++ /dev/null
@@ -1,363 +0,0 @@
-#ifdef __sparc__
- /* This file is generated from divrem.m4; DO NOT EDIT! */
-/*
- * Division and remainder, from Appendix E of the Sparc Version 8
- * Architecture Manual, with fixes from Gordon Irlam.
- */
-
-/*
- * Input: dividend and divisor in %o0 and %o1 respectively.
- *
- * m4 parameters:
- * .udiv name of function to generate
- * div div=div => %o0 / %o1; div=rem => %o0 % %o1
- * false false=true => signed; false=false => unsigned
- *
- * Algorithm parameters:
- * N how many bits per iteration we try to get (4)
- * WORDSIZE total number of bits (32)
- *
- * Derived constants:
- * TOPBITS number of bits in the top decade of a number
- *
- * Important variables:
- * Q the partial quotient under development (initially 0)
- * R the remainder so far, initially the dividend
- * ITER number of main division loop iterations required;
- * equal to ceil(log2(quotient) / N). Note that this
- * is the log base (2^N) of the quotient.
- * V the current comparand, initially divisor*2^(ITER*N-1)
- *
- * Cost:
- * Current estimate for non-large dividend is
- * ceil(log2(quotient) / N) * (10 + 7N/2) + C
- * A large dividend is one greater than 2^(31-TOPBITS) and takes a
- * different path, as the upper bits of the quotient must be developed
- * one bit at a time.
- */
-
-
-
-#define C_LABEL(name) name:
-
-#define C_SYMBOL_NAME(name) name
-
-#define ENTRY(name) \
- .global C_SYMBOL_NAME(name); \
- .align 4;\
- C_LABEL(name);\
- .type name,@function;
-
-#define LOC(name) . ## L ## name
-
-#define END(name) \
- .size name, . - name
-
-#define ST_DIV0 0x02
-
-ENTRY(.udiv)
-
- ! Ready to divide. Compute size of quotient; scale comparand.
- orcc %o1, %g0, %o5
- bne 1f
- mov %o0, %o3
-
- ! Divide by zero trap. If it returns, return 0 (about as
- ! wrong as possible, but that is what SunOS does...).
- ta ST_DIV0
- retl
- clr %o0
-
-1:
- cmp %o3, %o5 ! if %o1 exceeds %o0, done
- blu LOC(got_result) ! (and algorithm fails otherwise)
- clr %o2
- sethi %hi(1 << (32 - 4 - 1)), %g1
- cmp %o3, %g1
- blu LOC(not_really_big)
- clr %o4
-
- ! Here the dividend is >= 2**(31-N) or so. We must be careful here,
- ! as our usual N-at-a-shot divide step will cause overflow and havoc.
- ! The number of bits in the result here is N*ITER+SC, where SC <= N.
- ! Compute ITER in an unorthodox manner: know we need to shift V into
- ! the top decade: so do not even bother to compare to R.
- 1:
- cmp %o5, %g1
- bgeu 3f
- mov 1, %g2
- sll %o5, 4, %o5
- b 1b
- add %o4, 1, %o4
-
- ! Now compute %g2.
- 2: addcc %o5, %o5, %o5
- bcc LOC(not_too_big)
- add %g2, 1, %g2
-
- ! We get here if the %o1 overflowed while shifting.
- ! This means that %o3 has the high-order bit set.
- ! Restore %o5 and subtract from %o3.
- sll %g1, 4, %g1 ! high order bit
- srl %o5, 1, %o5 ! rest of %o5
- add %o5, %g1, %o5
- b LOC(do_single_div)
- sub %g2, 1, %g2
-
- LOC(not_too_big):
- 3: cmp %o5, %o3
- blu 2b
- nop
- be LOC(do_single_div)
- nop
- /* NB: these are commented out in the V8-Sparc manual as well */
- /* (I do not understand this) */
- ! %o5 > %o3: went too far: back up 1 step
- ! srl %o5, 1, %o5
- ! dec %g2
- ! do single-bit divide steps
- !
- ! We have to be careful here. We know that %o3 >= %o5, so we can do the
- ! first divide step without thinking. BUT, the others are conditional,
- ! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-
- ! order bit set in the first step, just falling into the regular
- ! division loop will mess up the first time around.
- ! So we unroll slightly...
- LOC(do_single_div):
- subcc %g2, 1, %g2
- bl LOC(end_regular_divide)
- nop
- sub %o3, %o5, %o3
- mov 1, %o2
- b LOC(end_single_divloop)
- nop
- LOC(single_divloop):
- sll %o2, 1, %o2
- bl 1f
- srl %o5, 1, %o5
- ! %o3 >= 0
- sub %o3, %o5, %o3
- b 2f
- add %o2, 1, %o2
- 1: ! %o3 < 0
- add %o3, %o5, %o3
- sub %o2, 1, %o2
- 2:
- LOC(end_single_divloop):
- subcc %g2, 1, %g2
- bge LOC(single_divloop)
- tst %o3
- b,a LOC(end_regular_divide)
-
-LOC(not_really_big):
-1:
- sll %o5, 4, %o5
- cmp %o5, %o3
- bleu 1b
- addcc %o4, 1, %o4
- be LOC(got_result)
- sub %o4, 1, %o4
-
- tst %o3 ! set up for initial iteration
-LOC(divloop):
- sll %o2, 4, %o2
- ! depth 1, accumulated bits 0
- bl LOC(1.16)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 2, accumulated bits 1
- bl LOC(2.17)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits 3
- bl LOC(3.19)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 7
- bl LOC(4.23)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2+1), %o2
-
-LOC(4.23):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2-1), %o2
-
-
-LOC(3.19):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 5
- bl LOC(4.21)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2+1), %o2
-
-LOC(4.21):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2-1), %o2
-
-
-
-LOC(2.17):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits 1
- bl LOC(3.17)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 3
- bl LOC(4.19)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2+1), %o2
-
-LOC(4.19):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2-1), %o2
-
-
-LOC(3.17):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 1
- bl LOC(4.17)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2+1), %o2
-
-LOC(4.17):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2-1), %o2
-
-
-
-
-LOC(1.16):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 2, accumulated bits -1
- bl LOC(2.15)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits -1
- bl LOC(3.15)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -1
- bl LOC(4.15)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2+1), %o2
-
-LOC(4.15):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2-1), %o2
-
-
-LOC(3.15):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -3
- bl LOC(4.13)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2+1), %o2
-
-LOC(4.13):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2-1), %o2
-
-
-
-LOC(2.15):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits -3
- bl LOC(3.13)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -5
- bl LOC(4.11)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2+1), %o2
-
-LOC(4.11):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2-1), %o2
-
-
-LOC(3.13):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -7
- bl LOC(4.9)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2+1), %o2
-
-LOC(4.9):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2-1), %o2
-
-
-
-
- 9:
-LOC(end_regular_divide):
- subcc %o4, 1, %o4
- bge LOC(divloop)
- tst %o3
- bl,a LOC(got_result)
- ! non-restoring fixup here (one instruction only!)
- sub %o2, 1, %o2
-
-
-LOC(got_result):
-
- retl
- mov %o2, %o0
-
-END(.udiv)
-
-#endif
diff --git a/mdk-stage1/dietlibc/sparc/umul.S b/mdk-stage1/dietlibc/sparc/umul.S
deleted file mode 100644
index 15038ab2a..000000000
--- a/mdk-stage1/dietlibc/sparc/umul.S
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifdef __sparc__
-/*
- * Unsigned multiply. Returns %o0 * %o1 in %o1%o0 (i.e., %o1 holds the
- * upper 32 bits of the 64-bit product).
- *
- * This code optimizes short (less than 13-bit) multiplies. Short
- * multiplies require 25 instruction cycles, and long ones require
- * 45 instruction cycles.
- *
- * On return, overflow has occurred (%o1 is not zero) if and only if
- * the Z condition code is clear, allowing, e.g., the following:
- *
- * call .umul
- * nop
- * bnz overflow (or tnz)
- */
-
-#define C_LABEL(name) name:
-
-#define C_SYMBOL_NAME(name) name
-
-#define ENTRY(name) \
- .global C_SYMBOL_NAME(name); \
- .align 4;\
- C_LABEL(name);\
- .type name,@function;
-
-#define LOC(name) . ## L ## name
-
-#define END(name) \
- .size name, . - name
-
-ENTRY(.umul)
- or %o0, %o1, %o4
- mov %o0, %y ! multiplier -> Y
- andncc %o4, 0xfff, %g0 ! test bits 12..31 of *both* args
- be LOC(mul_shortway) ! if zero, can do it the short way
- andcc %g0, %g0, %o4 ! zero the partial product; clear N & V
-
- /*
- * Long multiply. 32 steps, followed by a final shift step.
- */
- mulscc %o4, %o1, %o4 ! 1
- mulscc %o4, %o1, %o4 ! 2
- mulscc %o4, %o1, %o4 ! 3
- mulscc %o4, %o1, %o4 ! 4
- mulscc %o4, %o1, %o4 ! 5
- mulscc %o4, %o1, %o4 ! 6
- mulscc %o4, %o1, %o4 ! 7
- mulscc %o4, %o1, %o4 ! 8
- mulscc %o4, %o1, %o4 ! 9
- mulscc %o4, %o1, %o4 ! 10
- mulscc %o4, %o1, %o4 ! 11
- mulscc %o4, %o1, %o4 ! 12
- mulscc %o4, %o1, %o4 ! 13
- mulscc %o4, %o1, %o4 ! 14
- mulscc %o4, %o1, %o4 ! 15
- mulscc %o4, %o1, %o4 ! 16
- mulscc %o4, %o1, %o4 ! 17
- mulscc %o4, %o1, %o4 ! 18
- mulscc %o4, %o1, %o4 ! 19
- mulscc %o4, %o1, %o4 ! 20
- mulscc %o4, %o1, %o4 ! 21
- mulscc %o4, %o1, %o4 ! 22
- mulscc %o4, %o1, %o4 ! 23
- mulscc %o4, %o1, %o4 ! 24
- mulscc %o4, %o1, %o4 ! 25
- mulscc %o4, %o1, %o4 ! 26
- mulscc %o4, %o1, %o4 ! 27
- mulscc %o4, %o1, %o4 ! 28
- mulscc %o4, %o1, %o4 ! 29
- mulscc %o4, %o1, %o4 ! 30
- mulscc %o4, %o1, %o4 ! 31
- mulscc %o4, %o1, %o4 ! 32
- mulscc %o4, %g0, %o4 ! final shift
-
- /*
- * Normally, with the shift-and-add approach, if both numbers are
- * positive you get the correct result. With 32-bit two's-complement
- * numbers, -x is represented as
- *
- * x 32
- * ( 2 - ------ ) mod 2 * 2
- * 32
- * 2
- *
- * (the `mod 2' subtracts 1 from 1.bbbb). To avoid lots of 2^32s,
- * we can treat this as if the radix point were just to the left
- * of the sign bit (multiply by 2^32), and get
- *
- * -x = (2 - x) mod 2
- *
- * Then, ignoring the `mod 2's for convenience:
- *
- * x * y = xy
- * -x * y = 2y - xy
- * x * -y = 2x - xy
- * -x * -y = 4 - 2x - 2y + xy
- *
- * For signed multiplies, we subtract (x << 32) from the partial
- * product to fix this problem for negative multipliers (see mul.s).
- * Because of the way the shift into the partial product is calculated
- * (N xor V), this term is automatically removed for the multiplicand,
- * so we don't have to adjust.
- *
- * But for unsigned multiplies, the high order bit wasn't a sign bit,
- * and the correction is wrong. So for unsigned multiplies where the
- * high order bit is one, we end up with xy - (y << 32). To fix it
- * we add y << 32.
- */
-#if 0
- tst %o1
- bl,a 1f ! if %o1 < 0 (high order bit = 1),
- add %o4, %o0, %o4 ! %o4 += %o0 (add y to upper half)
-1: rd %y, %o0 ! get lower half of product
- retl
- addcc %o4, %g0, %o1 ! put upper half in place and set Z for %o1==0
-#else
- /* Faster code from tege@sics.se. */
- sra %o1, 31, %o2 ! make mask from sign bit
- and %o0, %o2, %o2 ! %o2 = 0 or %o0, depending on sign of %o1
- rd %y, %o0 ! get lower half of product
- retl
- addcc %o4, %o2, %o1 ! add compensation and put upper half in place
-#endif
-
-LOC(mul_shortway):
- /*
- * Short multiply. 12 steps, followed by a final shift step.
- * The resulting bits are off by 12 and (32-12) = 20 bit positions,
- * but there is no problem with %o0 being negative (unlike above),
- * and overflow is impossible (the answer is at most 24 bits long).
- */
- mulscc %o4, %o1, %o4 ! 1
- mulscc %o4, %o1, %o4 ! 2
- mulscc %o4, %o1, %o4 ! 3
- mulscc %o4, %o1, %o4 ! 4
- mulscc %o4, %o1, %o4 ! 5
- mulscc %o4, %o1, %o4 ! 6
- mulscc %o4, %o1, %o4 ! 7
- mulscc %o4, %o1, %o4 ! 8
- mulscc %o4, %o1, %o4 ! 9
- mulscc %o4, %o1, %o4 ! 10
- mulscc %o4, %o1, %o4 ! 11
- mulscc %o4, %o1, %o4 ! 12
- mulscc %o4, %g0, %o4 ! final shift
-
- /*
- * %o4 has 20 of the bits that should be in the result; %y has
- * the bottom 12 (as %y's top 12). That is:
- *
- * %o4 %y
- * +----------------+----------------+
- * | -12- | -20- | -12- | -20- |
- * +------(---------+------)---------+
- * -----result-----
- *
- * The 12 bits of %o4 left of the `result' area are all zero;
- * in fact, all top 20 bits of %o4 are zero.
- */
-
- rd %y, %o5
- sll %o4, 12, %o0 ! shift middle bits left 12
- srl %o5, 20, %o5 ! shift low bits right 20
- or %o5, %o0, %o0
- retl
- addcc %g0, %g0, %o1 ! %o1 = zero, and set Z
-
-END(.umul)
-#endif
diff --git a/mdk-stage1/dietlibc/sparc/unified.S b/mdk-stage1/dietlibc/sparc/unified.S
deleted file mode 100644
index 3cd609da5..000000000
--- a/mdk-stage1/dietlibc/sparc/unified.S
+++ /dev/null
@@ -1,28 +0,0 @@
-#include <dietfeatures.h>
-
-.text
-.global __unified_syscall
-__unified_syscall:
- ta 0x10
-
- bcc 1f
- save %sp, -104, %sp
-
- neg %i0, %i0
-1:
- add %i0, 0xff, %l2
- cmp %l2, 0xfe
- bgu 2f
- neg %i0, %l3
-#ifdef WANT_THREAD_SAVE
- call __errno_location
- nop
-#else
- sethi %hi(errno), %o0
- or %o0, %lo(errno), %o0
-#endif
- st %l3, [ %o0 ]
- mov -1, %i0
-2:
- ret
- restore
diff --git a/mdk-stage1/dietlibc/sparc/urem.S b/mdk-stage1/dietlibc/sparc/urem.S
deleted file mode 100644
index 943cb7873..000000000
--- a/mdk-stage1/dietlibc/sparc/urem.S
+++ /dev/null
@@ -1,362 +0,0 @@
-#ifdef __sparc__
- /* This file is generated from divrem.m4; DO NOT EDIT! */
-/*
- * Division and remainder, from Appendix E of the Sparc Version 8
- * Architecture Manual, with fixes from Gordon Irlam.
- */
-
-/*
- * Input: dividend and divisor in %o0 and %o1 respectively.
- *
- * m4 parameters:
- * .urem name of function to generate
- * rem rem=div => %o0 / %o1; rem=rem => %o0 % %o1
- * false false=true => signed; false=false => unsigned
- *
- * Algorithm parameters:
- * N how many bits per iteration we try to get (4)
- * WORDSIZE total number of bits (32)
- *
- * Derived constants:
- * TOPBITS number of bits in the top decade of a number
- *
- * Important variables:
- * Q the partial quotient under development (initially 0)
- * R the remainder so far, initially the dividend
- * ITER number of main division loop iterations required;
- * equal to ceil(log2(quotient) / N). Note that this
- * is the log base (2^N) of the quotient.
- * V the current comparand, initially divisor*2^(ITER*N-1)
- *
- * Cost:
- * Current estimate for non-large dividend is
- * ceil(log2(quotient) / N) * (10 + 7N/2) + C
- * A large dividend is one greater than 2^(31-TOPBITS) and takes a
- * different path, as the upper bits of the quotient must be developed
- * one bit at a time.
- */
-
-
-
-#define C_LABEL(name) name:
-
-#define C_SYMBOL_NAME(name) name
-
-#define ENTRY(name) \
- .global C_SYMBOL_NAME(name); \
- .align 4;\
- C_LABEL(name);\
- .type name,@function;
-
-#define LOC(name) . ## L ## name
-
-#define END(name) \
- .size name, . - name
-
-#define ST_DIV0 0x02
-
-ENTRY(.urem)
-
- ! Ready to divide. Compute size of quotient; scale comparand.
- orcc %o1, %g0, %o5
- bne 1f
- mov %o0, %o3
-
- ! Divide by zero trap. If it returns, return 0 (about as
- ! wrong as possible, but that is what SunOS does...).
- ta ST_DIV0
- retl
- clr %o0
-
-1:
- cmp %o3, %o5 ! if %o1 exceeds %o0, done
- blu LOC(got_result) ! (and algorithm fails otherwise)
- clr %o2
- sethi %hi(1 << (32 - 4 - 1)), %g1
- cmp %o3, %g1
- blu LOC(not_really_big)
- clr %o4
-
- ! Here the dividend is >= 2**(31-N) or so. We must be careful here,
- ! as our usual N-at-a-shot divide step will cause overflow and havoc.
- ! The number of bits in the result here is N*ITER+SC, where SC <= N.
- ! Compute ITER in an unorthodox manner: know we need to shift V into
- ! the top decade: so do not even bother to compare to R.
- 1:
- cmp %o5, %g1
- bgeu 3f
- mov 1, %g2
- sll %o5, 4, %o5
- b 1b
- add %o4, 1, %o4
-
- ! Now compute %g2.
- 2: addcc %o5, %o5, %o5
- bcc LOC(not_too_big)
- add %g2, 1, %g2
-
- ! We get here if the %o1 overflowed while shifting.
- ! This means that %o3 has the high-order bit set.
- ! Restore %o5 and subtract from %o3.
- sll %g1, 4, %g1 ! high order bit
- srl %o5, 1, %o5 ! rest of %o5
- add %o5, %g1, %o5
- b LOC(do_single_div)
- sub %g2, 1, %g2
-
- LOC(not_too_big):
- 3: cmp %o5, %o3
- blu 2b
- nop
- be LOC(do_single_div)
- nop
- /* NB: these are commented out in the V8-Sparc manual as well */
- /* (I do not understand this) */
- ! %o5 > %o3: went too far: back up 1 step
- ! srl %o5, 1, %o5
- ! dec %g2
- ! do single-bit divide steps
- !
- ! We have to be careful here. We know that %o3 >= %o5, so we can do the
- ! first divide step without thinking. BUT, the others are conditional,
- ! and are only done if %o3 >= 0. Because both %o3 and %o5 may have the high-
- ! order bit set in the first step, just falling into the regular
- ! division loop will mess up the first time around.
- ! So we unroll slightly...
- LOC(do_single_div):
- subcc %g2, 1, %g2
- bl LOC(end_regular_divide)
- nop
- sub %o3, %o5, %o3
- mov 1, %o2
- b LOC(end_single_divloop)
- nop
- LOC(single_divloop):
- sll %o2, 1, %o2
- bl 1f
- srl %o5, 1, %o5
- ! %o3 >= 0
- sub %o3, %o5, %o3
- b 2f
- add %o2, 1, %o2
- 1: ! %o3 < 0
- add %o3, %o5, %o3
- sub %o2, 1, %o2
- 2:
- LOC(end_single_divloop):
- subcc %g2, 1, %g2
- bge LOC(single_divloop)
- tst %o3
- b,a LOC(end_regular_divide)
-
-LOC(not_really_big):
-1:
- sll %o5, 4, %o5
- cmp %o5, %o3
- bleu 1b
- addcc %o4, 1, %o4
- be LOC(got_result)
- sub %o4, 1, %o4
-
- tst %o3 ! set up for initial iteration
-LOC(divloop):
- sll %o2, 4, %o2
- ! depth 1, accumulated bits 0
- bl LOC(1.16)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 2, accumulated bits 1
- bl LOC(2.17)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits 3
- bl LOC(3.19)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 7
- bl LOC(4.23)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2+1), %o2
-
-LOC(4.23):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (7*2-1), %o2
-
-
-LOC(3.19):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 5
- bl LOC(4.21)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2+1), %o2
-
-LOC(4.21):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (5*2-1), %o2
-
-
-
-LOC(2.17):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits 1
- bl LOC(3.17)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits 3
- bl LOC(4.19)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2+1), %o2
-
-LOC(4.19):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (3*2-1), %o2
-
-
-LOC(3.17):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits 1
- bl LOC(4.17)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2+1), %o2
-
-LOC(4.17):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (1*2-1), %o2
-
-
-
-
-LOC(1.16):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 2, accumulated bits -1
- bl LOC(2.15)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 3, accumulated bits -1
- bl LOC(3.15)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -1
- bl LOC(4.15)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2+1), %o2
-
-LOC(4.15):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-1*2-1), %o2
-
-
-LOC(3.15):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -3
- bl LOC(4.13)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2+1), %o2
-
-LOC(4.13):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-3*2-1), %o2
-
-
-
-LOC(2.15):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 3, accumulated bits -3
- bl LOC(3.13)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- ! depth 4, accumulated bits -5
- bl LOC(4.11)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2+1), %o2
-
-LOC(4.11):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-5*2-1), %o2
-
-
-LOC(3.13):
- ! remainder is negative
- addcc %o3,%o5,%o3
- ! depth 4, accumulated bits -7
- bl LOC(4.9)
- srl %o5,1,%o5
- ! remainder is positive
- subcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2+1), %o2
-
-LOC(4.9):
- ! remainder is negative
- addcc %o3,%o5,%o3
- b 9f
- add %o2, (-7*2-1), %o2
-
-
-
-
- 9:
-LOC(end_regular_divide):
- subcc %o4, 1, %o4
- bge LOC(divloop)
- tst %o3
- bl,a LOC(got_result)
- ! non-restoring fixup here (one instruction only!)
- add %o3, %o1, %o3
-
-
-LOC(got_result):
-
- retl
- mov %o3, %o0
-
-END(.urem)
-#endif
diff --git a/mdk-stage1/dietlibc/start.h b/mdk-stage1/dietlibc/start.h
deleted file mode 100644
index 7f9e6be28..000000000
--- a/mdk-stage1/dietlibc/start.h
+++ /dev/null
@@ -1,14 +0,0 @@
-.section ".bss"
-.align 8
-
-.weak errno
-errno:
-.global __errno
-__errno:
- .long 0
-
-.weak environ
-environ:
-.global __environ
-__environ:
- .long 0
diff --git a/mdk-stage1/dietlibc/syscalls.c/_llseek.c b/mdk-stage1/dietlibc/syscalls.c/_llseek.c
deleted file mode 100644
index fdf49eba5..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/_llseek.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <unistd.h>
-#include <sys/types.h>
-#include "syscalls.h"
-
-_syscall5(int,_llseek,uint,fd,ulong,hi,ulong,lo,loff_t*,res,uint,wh);
diff --git a/mdk-stage1/dietlibc/syscalls.c/_newselect.c b/mdk-stage1/dietlibc/syscalls.c/_newselect.c
deleted file mode 100644
index cb42193bd..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/_newselect.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include <linux/types.h>
-#include <linux/time.h>
-#include "syscalls.h"
-
-_syscall5(int,_newselect,int,n,fd_set *,rd,fd_set *,wr,fd_set *,ex,struct timeval *,timeval);
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/access.c b/mdk-stage1/dietlibc/syscalls.c/access.c
deleted file mode 100644
index 80944733a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/access.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,access,const char*,pathname,int,mode)
diff --git a/mdk-stage1/dietlibc/syscalls.c/chdir.c b/mdk-stage1/dietlibc/syscalls.c/chdir.c
deleted file mode 100644
index a679f528d..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/chdir.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,chdir,void*,path)
diff --git a/mdk-stage1/dietlibc/syscalls.c/chmod.c b/mdk-stage1/dietlibc/syscalls.c/chmod.c
deleted file mode 100644
index 80ad33b40..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/chmod.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,chmod,const char * ,path,mode_t,mode)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/chown.c b/mdk-stage1/dietlibc/syscalls.c/chown.c
deleted file mode 100644
index 5a9352684..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/chown.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,chown,char*,path,uid_t,owner,gid_t,group)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/chroot.c b/mdk-stage1/dietlibc/syscalls.c/chroot.c
deleted file mode 100644
index ab39f7ebe..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/chroot.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,chroot,void*,path)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/clone.c b/mdk-stage1/dietlibc/syscalls.c/clone.c
deleted file mode 100644
index 985eee4c8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/clone.c
+++ /dev/null
@@ -1 +0,0 @@
-#warning "No CLONE support yet"
diff --git a/mdk-stage1/dietlibc/syscalls.c/close.c b/mdk-stage1/dietlibc/syscalls.c/close.c
deleted file mode 100644
index a7d7f0076..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/close.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,close,int,fd)
diff --git a/mdk-stage1/dietlibc/syscalls.c/dup.c b/mdk-stage1/dietlibc/syscalls.c/dup.c
deleted file mode 100644
index 9c28f0bd6..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/dup.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,dup,int,fd)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/dup2.c b/mdk-stage1/dietlibc/syscalls.c/dup2.c
deleted file mode 100644
index 399314aa8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/dup2.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,dup2,int,one,int,two)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/execve.c b/mdk-stage1/dietlibc/syscalls.c/execve.c
deleted file mode 100644
index c2bac0117..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/execve.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,execve,const char *,fn,void *,argv,void *,envp)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/exit.c b/mdk-stage1/dietlibc/syscalls.c/exit.c
deleted file mode 100644
index 87087c939..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/exit.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,exit,int,exitcode)
diff --git a/mdk-stage1/dietlibc/syscalls.c/fchdir.c b/mdk-stage1/dietlibc/syscalls.c/fchdir.c
deleted file mode 100644
index b3a41dc7a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fchdir.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,fchdir,int,fd)
diff --git a/mdk-stage1/dietlibc/syscalls.c/fchmod.c b/mdk-stage1/dietlibc/syscalls.c/fchmod.c
deleted file mode 100644
index 09e52b6c7..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fchmod.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,fchmod,int,filedes,mode_t,mode)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/fchown.c b/mdk-stage1/dietlibc/syscalls.c/fchown.c
deleted file mode 100644
index 58923a137..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fchown.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,fchown,int,fd,uid_t,owner,gid_t,group)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/fcntl.c b/mdk-stage1/dietlibc/syscalls.c/fcntl.c
deleted file mode 100644
index b21be9531..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fcntl.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,fcntl,int,fd,int,cmd,long,arg)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/flock.c b/mdk-stage1/dietlibc/syscalls.c/flock.c
deleted file mode 100644
index 6fcb336ef..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/flock.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,flock,int,fd,int,op)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/fork.c b/mdk-stage1/dietlibc/syscalls.c/fork.c
deleted file mode 100644
index 1d4b892b6..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fork.c
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "syscalls.h"
-
-#ifndef __sparc__
-
-_syscall0(int,fork)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/fsync.c b/mdk-stage1/dietlibc/syscalls.c/fsync.c
deleted file mode 100644
index db6198b8a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/fsync.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,fsync,int,fd)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/ftruncate.c b/mdk-stage1/dietlibc/syscalls.c/ftruncate.c
deleted file mode 100644
index 5f002a899..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/ftruncate.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <sys/types.h>
-#include "syscalls.h"
-
-_syscall2(int,ftruncate,int,fd,off_t,length)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getcwd.c b/mdk-stage1/dietlibc/syscalls.c/getcwd.c
deleted file mode 100644
index 9e5e4a3e2..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getcwd.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-/* this syscall exists since Linux 2.1.92 */
-
-_syscall2(int,getcwd,char*,buf,unsigned long,size)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getdents.c b/mdk-stage1/dietlibc/syscalls.c/getdents.c
deleted file mode 100644
index be941b21e..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getdents.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int, getdents, unsigned int, fd, void *, dirp, unsigned int, count);
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/getegid.c b/mdk-stage1/dietlibc/syscalls.c/getegid.c
deleted file mode 100644
index 3213d640c..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getegid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(gid_t,getegid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/geteuid.c b/mdk-stage1/dietlibc/syscalls.c/geteuid.c
deleted file mode 100644
index 5b31a3cca..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/geteuid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(uid_t,geteuid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getgid.c b/mdk-stage1/dietlibc/syscalls.c/getgid.c
deleted file mode 100644
index 2f7d96286..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getgid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(gid_t,getgid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getgroups.c b/mdk-stage1/dietlibc/syscalls.c/getgroups.c
deleted file mode 100644
index 3e4d6797a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getgroups.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,getgroups,int,size,int*,list)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getpgid.c b/mdk-stage1/dietlibc/syscalls.c/getpgid.c
deleted file mode 100644
index 0b4ff528b..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getpgid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(pid_t,getpgid,pid_t,pid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getpid.c b/mdk-stage1/dietlibc/syscalls.c/getpid.c
deleted file mode 100644
index d60a8db9a..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getpid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall0(int,getpid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getppid.c b/mdk-stage1/dietlibc/syscalls.c/getppid.c
deleted file mode 100644
index ee87a8eae..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getppid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall0(int,getppid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getpriority.c b/mdk-stage1/dietlibc/syscalls.c/getpriority.c
deleted file mode 100644
index 6f94bcf42..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getpriority.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,getpriority,int,which,int,who)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/getresgid.c b/mdk-stage1/dietlibc/syscalls.c/getresgid.c
deleted file mode 100644
index 264ec7dce..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getresgid.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-#ifdef __NR_getresgid
-
-_syscall3(int,getresgid,gid_t*,rgid,gid_t*,egid,gid_t*,sgid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/getresuid.c b/mdk-stage1/dietlibc/syscalls.c/getresuid.c
deleted file mode 100644
index 74e2daec2..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getresuid.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-#ifdef __getresuid
-
-_syscall3(int,getresuid,uid_t*,ruid,uid_t*,euid,uid_t*,suid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/getrlimit.c b/mdk-stage1/dietlibc/syscalls.c/getrlimit.c
deleted file mode 100644
index 635b2baf4..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getrlimit.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,getrlimit,int,resource,void*,rlim)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getrusage.c b/mdk-stage1/dietlibc/syscalls.c/getrusage.c
deleted file mode 100644
index 815d3e617..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getrusage.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,getrusage,int,who,void*,rusage)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getsid.c b/mdk-stage1/dietlibc/syscalls.c/getsid.c
deleted file mode 100644
index 69974c36c..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getsid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(pid_t,getsid,pid_t,pid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/gettimeofday.c b/mdk-stage1/dietlibc/syscalls.c/gettimeofday.c
deleted file mode 100644
index 5f4931a0c..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/gettimeofday.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include <linux/time.h>
-#include "syscalls.h"
-
-_syscall2(int,gettimeofday,struct timeval *,tv,void *,tz)
diff --git a/mdk-stage1/dietlibc/syscalls.c/getuid.c b/mdk-stage1/dietlibc/syscalls.c/getuid.c
deleted file mode 100644
index bf38447a6..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/getuid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(uid_t,getuid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/ioctl.c b/mdk-stage1/dietlibc/syscalls.c/ioctl.c
deleted file mode 100644
index 1612109d3..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/ioctl.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,ioctl,int,fd,int,request,void *,argp)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/kill.c b/mdk-stage1/dietlibc/syscalls.c/kill.c
deleted file mode 100644
index e56b0ac1b..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/kill.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,kill,pid_t,pid,int,sig)
diff --git a/mdk-stage1/dietlibc/syscalls.c/lchown.c b/mdk-stage1/dietlibc/syscalls.c/lchown.c
deleted file mode 100644
index 976d2ee1f..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/lchown.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,lchown,char*,path,uid_t,owner,gid_t,group)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/link.c b/mdk-stage1/dietlibc/syscalls.c/link.c
deleted file mode 100644
index ab9b427d9..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/link.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,link,const char *,a,const char *,b)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/lseek.c b/mdk-stage1/dietlibc/syscalls.c/lseek.c
deleted file mode 100644
index 9925a2185..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/lseek.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(unsigned long,lseek,int,fd,unsigned long,offset,int,whence)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/mkdir.c b/mdk-stage1/dietlibc/syscalls.c/mkdir.c
deleted file mode 100644
index aac682c99..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mkdir.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,mkdir,void*,path,mode_t,mode)
diff --git a/mdk-stage1/dietlibc/syscalls.c/mknod.c b/mdk-stage1/dietlibc/syscalls.c/mknod.c
deleted file mode 100644
index 00e836b73..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mknod.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,mknod,const char*,pathname,mode_t,mode,dev_t,dev)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/mount.c b/mdk-stage1/dietlibc/syscalls.c/mount.c
deleted file mode 100644
index 2d71ee812..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mount.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall5(int,mount,const char *,spec,const char *,dir,const char *,type,unsigned long,rwflag,const void *,data);
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/mprotect.c b/mdk-stage1/dietlibc/syscalls.c/mprotect.c
deleted file mode 100644
index 634a12089..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mprotect.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,mprotect,const void *,addr, size_t, len, int, prot)
diff --git a/mdk-stage1/dietlibc/syscalls.c/mremap.c b/mdk-stage1/dietlibc/syscalls.c/mremap.c
deleted file mode 100644
index 37d066bac..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/mremap.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall4(int,mremap,void*,old_address,size_t,old_size,size_t,new_size,unsigned long,flags)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/munmap.c b/mdk-stage1/dietlibc/syscalls.c/munmap.c
deleted file mode 100644
index 40bc98270..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/munmap.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,munmap,void*,start,size_t,len)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/nanosleep.c b/mdk-stage1/dietlibc/syscalls.c/nanosleep.c
deleted file mode 100644
index 71aca1f09..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/nanosleep.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include <linux/time.h>
-#include "syscalls.h"
-
-_syscall2(int,nanosleep,struct timeval *,in,struct timeval *,out)
diff --git a/mdk-stage1/dietlibc/syscalls.c/open.c b/mdk-stage1/dietlibc/syscalls.c/open.c
deleted file mode 100644
index 8b3ccfcc3..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/open.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,open,const char *,fn,int,flags,mode_t,mode)
diff --git a/mdk-stage1/dietlibc/syscalls.c/pipe.c b/mdk-stage1/dietlibc/syscalls.c/pipe.c
deleted file mode 100644
index 42197c881..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/pipe.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(int,pipe,int *,filedes)
diff --git a/mdk-stage1/dietlibc/syscalls.c/poll.c b/mdk-stage1/dietlibc/syscalls.c/poll.c
deleted file mode 100644
index 10d0d1f78..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/poll.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,poll,void *,ufds,int,nfds,int,timeout)
diff --git a/mdk-stage1/dietlibc/syscalls.c/read.c b/mdk-stage1/dietlibc/syscalls.c/read.c
deleted file mode 100644
index f5532054e..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/read.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,read,int,fd,const char *,buf,unsigned long,count)
diff --git a/mdk-stage1/dietlibc/syscalls.c/readlink.c b/mdk-stage1/dietlibc/syscalls.c/readlink.c
deleted file mode 100644
index 482f8fe27..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/readlink.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-#include <linux/types.h>
-
-_syscall3(int,readlink,char*,path,char*,buf,size_t,bufsiz)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/reboot.c b/mdk-stage1/dietlibc/syscalls.c/reboot.c
deleted file mode 100644
index 0ad474894..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/reboot.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,reboot,int,magic,int,magic_too,int,flag)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/rename.c b/mdk-stage1/dietlibc/syscalls.c/rename.c
deleted file mode 100644
index f86d50728..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/rename.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,rename,char*,oldpath,char*,newpath)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/rmdir.c b/mdk-stage1/dietlibc/syscalls.c/rmdir.c
deleted file mode 100644
index 303885264..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/rmdir.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,rmdir,void*,path)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setdomainname.c b/mdk-stage1/dietlibc/syscalls.c/setdomainname.c
deleted file mode 100644
index 83d3aa8b8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setdomainname.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,setdomainname,const char *,name,int,len)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/setgid.c b/mdk-stage1/dietlibc/syscalls.c/setgid.c
deleted file mode 100644
index 1f7263aeb..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setgid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,setgid,int,gid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setgroups.c b/mdk-stage1/dietlibc/syscalls.c/setgroups.c
deleted file mode 100644
index fed3b85c1..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setgroups.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,setgroups,int,size,const int*,list)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/sethostname.c b/mdk-stage1/dietlibc/syscalls.c/sethostname.c
deleted file mode 100644
index e4b736f87..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sethostname.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,sethostname,const char *,name,int,len)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/setitimer.c b/mdk-stage1/dietlibc/syscalls.c/setitimer.c
deleted file mode 100644
index 28935cab7..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setitimer.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,setitimer,int,which,void *,value,void *,ovalue)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/setpgid.c b/mdk-stage1/dietlibc/syscalls.c/setpgid.c
deleted file mode 100644
index 66fbf82dd..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setpgid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,setpgid,int,name,int,len)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setpriority.c b/mdk-stage1/dietlibc/syscalls.c/setpriority.c
deleted file mode 100644
index bc04227d2..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setpriority.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,setpriority,int,which,int,who,int,prio)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/setregid.c b/mdk-stage1/dietlibc/syscalls.c/setregid.c
deleted file mode 100644
index c6911aca8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setregid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,setregid,gid_t,rgid,gid_t,egid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setresgid.c b/mdk-stage1/dietlibc/syscalls.c/setresgid.c
deleted file mode 100644
index 817fd2942..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setresgid.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-#ifdef __NR_setresgid
-
-_syscall3(int,setresgid,gid_t*,rgid,gid_t*,egid,gid_t*,sgid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/setresuid.c b/mdk-stage1/dietlibc/syscalls.c/setresuid.c
deleted file mode 100644
index 7073d8ac2..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setresuid.c
+++ /dev/null
@@ -1,8 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-#ifdef __NR_setresuid
-
-_syscall3(int,setresuid,uid_t*,ruid,uid_t*,euid,uid_t*,suid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.c/setreuid.c b/mdk-stage1/dietlibc/syscalls.c/setreuid.c
deleted file mode 100644
index c0c23a12d..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setreuid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,setreuid,uid_t,ruid,uid_t,euid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setrlimit.c b/mdk-stage1/dietlibc/syscalls.c/setrlimit.c
deleted file mode 100644
index 213234282..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setrlimit.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,setrlimit,int,resource,void*,rlim)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setsid.c b/mdk-stage1/dietlibc/syscalls.c/setsid.c
deleted file mode 100644
index 4b35a1316..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setsid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall0(pid_t,setsid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/setuid.c b/mdk-stage1/dietlibc/syscalls.c/setuid.c
deleted file mode 100644
index 620876c9f..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/setuid.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,setuid,int,uid)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sigaction.c b/mdk-stage1/dietlibc/syscalls.c/sigaction.c
deleted file mode 100644
index cfa5c683f..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sigaction.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,sigaction,int,signum,void*,act,void*,oldact)
diff --git a/mdk-stage1/dietlibc/syscalls.c/signal.c b/mdk-stage1/dietlibc/syscalls.c/signal.c
deleted file mode 100644
index 1a913be45..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/signal.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,signal,int,num,void *,len)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sigpending.c b/mdk-stage1/dietlibc/syscalls.c/sigpending.c
deleted file mode 100644
index 08fb23991..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sigpending.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,sigpending,void*,set)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sigprocmask.c b/mdk-stage1/dietlibc/syscalls.c/sigprocmask.c
deleted file mode 100644
index e9dcc2d67..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sigprocmask.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,sigprocmask,int,how,void*,set,void*,oldset)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sigsuspend.c b/mdk-stage1/dietlibc/syscalls.c/sigsuspend.c
deleted file mode 100644
index 0fe90e623..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sigsuspend.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,sigsuspend,void*,mask)
diff --git a/mdk-stage1/dietlibc/syscalls.c/socketcall.c b/mdk-stage1/dietlibc/syscalls.c/socketcall.c
deleted file mode 100644
index eee1ae86d..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/socketcall.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,socketcall,int,code,unsigned long *, args)
diff --git a/mdk-stage1/dietlibc/syscalls.c/swapoff.c b/mdk-stage1/dietlibc/syscalls.c/swapoff.c
deleted file mode 100644
index e1daa89a9..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/swapoff.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,swapoff,const char *,fn)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/swapon.c b/mdk-stage1/dietlibc/syscalls.c/swapon.c
deleted file mode 100644
index 543e41e79..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/swapon.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,swapon,const char*,path,int,swapflags)
diff --git a/mdk-stage1/dietlibc/syscalls.c/symlink.c b/mdk-stage1/dietlibc/syscalls.c/symlink.c
deleted file mode 100644
index b3f4d0b1c..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/symlink.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,symlink,const char *,a,const char *,b)
diff --git a/mdk-stage1/dietlibc/syscalls.c/sync.c b/mdk-stage1/dietlibc/syscalls.c/sync.c
deleted file mode 100644
index cca17461f..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/sync.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall0(int,sync)
diff --git a/mdk-stage1/dietlibc/syscalls.c/syslog.c b/mdk-stage1/dietlibc/syscalls.c/syslog.c
deleted file mode 100644
index aace870ea..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/syslog.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,syslog,int, type, char *, buf, int, len);
diff --git a/mdk-stage1/dietlibc/syscalls.c/time.c b/mdk-stage1/dietlibc/syscalls.c/time.c
deleted file mode 100644
index dc15b28f9..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/time.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(time_t,time,time_t*,path)
diff --git a/mdk-stage1/dietlibc/syscalls.c/truncate.c b/mdk-stage1/dietlibc/syscalls.c/truncate.c
deleted file mode 100644
index 721bd7134..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/truncate.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall2(int,truncate,const char*,path,off_t,length)
diff --git a/mdk-stage1/dietlibc/syscalls.c/umask.c b/mdk-stage1/dietlibc/syscalls.c/umask.c
deleted file mode 100644
index 506038243..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/umask.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(int,umask,mode_t,mask)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/umount.c b/mdk-stage1/dietlibc/syscalls.c/umount.c
deleted file mode 100644
index 4d3ef7637..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/umount.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,umount,const char *,dir)
diff --git a/mdk-stage1/dietlibc/syscalls.c/uname.c b/mdk-stage1/dietlibc/syscalls.c/uname.c
deleted file mode 100644
index 68f135007..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/uname.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall1(int,uname,void *,utsname)
-
diff --git a/mdk-stage1/dietlibc/syscalls.c/unlink.c b/mdk-stage1/dietlibc/syscalls.c/unlink.c
deleted file mode 100644
index 860ccebbf..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/unlink.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall1(int,unlink,const char *,fn)
diff --git a/mdk-stage1/dietlibc/syscalls.c/utime.c b/mdk-stage1/dietlibc/syscalls.c/utime.c
deleted file mode 100644
index 185bdf9e8..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/utime.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall2(int,utime,void*,filename,void*,buf)
diff --git a/mdk-stage1/dietlibc/syscalls.c/vhangup.c b/mdk-stage1/dietlibc/syscalls.c/vhangup.c
deleted file mode 100644
index bb0669765..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/vhangup.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall0(int,vhangup)
diff --git a/mdk-stage1/dietlibc/syscalls.c/wait4.c b/mdk-stage1/dietlibc/syscalls.c/wait4.c
deleted file mode 100644
index 4ae7eabcd..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/wait4.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall4(int,wait4,pid_t,pid,int *,status,int,opts,void *,rusage)
diff --git a/mdk-stage1/dietlibc/syscalls.c/waitpid.c b/mdk-stage1/dietlibc/syscalls.c/waitpid.c
deleted file mode 100644
index b7167f9ce..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/waitpid.c
+++ /dev/null
@@ -1,4 +0,0 @@
-#include <linux/types.h>
-#include "syscalls.h"
-
-_syscall3(int,waitpid,int,pid,int *,status,int,options)
diff --git a/mdk-stage1/dietlibc/syscalls.c/write.c b/mdk-stage1/dietlibc/syscalls.c/write.c
deleted file mode 100644
index d1f7347d5..000000000
--- a/mdk-stage1/dietlibc/syscalls.c/write.c
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-_syscall3(int,write,int,fd,const char *,buf,unsigned long,count)
diff --git a/mdk-stage1/dietlibc/syscalls.h b/mdk-stage1/dietlibc/syscalls.h
deleted file mode 100644
index eba7a3c00..000000000
--- a/mdk-stage1/dietlibc/syscalls.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifdef __ASSEMBLER__
-
-#include <asm/unistd.h>
-
-#else
-
-#include <linux/unistd.h>
-
-#endif
-
-#ifdef __i386__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-sym: \
- movb $__NR_##name,%al; \
- jmp __unified_syscall
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-sym: \
- movb $__NR_##name,%al; \
- jmp __unified_syscall
-
-#endif
-
-#ifdef __sparc__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-sym: \
- b __unified_syscall; \
- mov __NR_##name, %g1
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-sym: \
- b __unified_syscall; \
- mov __NR_##name, %g1
-
-#endif
-
-#ifdef __powerpc__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-sym: \
- li 0,__NR_##name; \
- b __unified_syscall
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-sym: \
- li 0,__NR_##name; \
- b __unified_syscall
-
-#endif
-
-
-#ifdef __mips__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-.ent sym; \
-sym: \
- li $2,__NR_##name; \
- la $25,__unified_syscall; \
- jr $25; \
-.end sym
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-.ent sym; \
-sym: \
- li $2,__NR_##name; \
- la $25,__unified_syscall; \
- jr $25; \
-.end sym
-
-#endif
-
-#ifdef __arm__
-
-#define syscall_weak(name,wsym,sym) \
-.text; \
-.weak wsym; \
-wsym: ; \
-.global sym; \
-sym: \
- swi __NR_##name; \
- b __unified_syscall
-
-#define syscall(name,sym) \
-.text; \
-.global sym; \
-sym: \
- swi __NR_##name; \
- b __unified_syscall
-
-#endif
-
-
-#ifdef __alpha__
-
-#define syscall_weak(name,wsym,sym) \
-.text ; \
-.align 2 ; \
-.weak wsym; \
-.type wsym,@function ; \
-wsym: ; \
-.global sym ; \
-.type sym,@function ; \
-sym: ; \
- lda $0, __NR_##name($31) ; \
- br __unified_syscall
-
-#define syscall(name,sym) \
-.text ; \
-.align 2 ; \
-.global sym ; \
-.type sym,@function ; \
-sym: ; \
- lda $0, __NR_##name($31) ; \
- br __unified_syscall
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/__getpagesize.S b/mdk-stage1/dietlibc/syscalls.s/__getpagesize.S
deleted file mode 100644
index c9fd97898..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/__getpagesize.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_getpagesize
-syscall(getpagesize,getpagesize)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/__pread.S b/mdk-stage1/dietlibc/syscalls.s/__pread.S
deleted file mode 100644
index ad47c7873..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/__pread.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(pread,__pread,__libc__pread)
diff --git a/mdk-stage1/dietlibc/syscalls.s/__reboot.S b/mdk-stage1/dietlibc/syscalls.s/__reboot.S
deleted file mode 100644
index 0de4f25b2..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/__reboot.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(reboot,__reboot)
diff --git a/mdk-stage1/dietlibc/syscalls.s/_llseek.S b/mdk-stage1/dietlibc/syscalls.s/_llseek.S
deleted file mode 100644
index 3e240d822..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/_llseek.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(_llseek,_llseek)
diff --git a/mdk-stage1/dietlibc/syscalls.s/access.S b/mdk-stage1/dietlibc/syscalls.s/access.S
deleted file mode 100644
index d1edafd8c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/access.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(access,access)
diff --git a/mdk-stage1/dietlibc/syscalls.s/brk.S b/mdk-stage1/dietlibc/syscalls.s/brk.S
deleted file mode 100644
index 6e21810bd..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/brk.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(brk,__diet_brk)
diff --git a/mdk-stage1/dietlibc/syscalls.s/chdir.S b/mdk-stage1/dietlibc/syscalls.s/chdir.S
deleted file mode 100644
index 204f3dd6c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/chdir.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(chdir,chdir)
diff --git a/mdk-stage1/dietlibc/syscalls.s/chmod.S b/mdk-stage1/dietlibc/syscalls.s/chmod.S
deleted file mode 100644
index c1b85f5a4..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/chmod.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(chmod,chmod)
diff --git a/mdk-stage1/dietlibc/syscalls.s/chown.S b/mdk-stage1/dietlibc/syscalls.s/chown.S
deleted file mode 100644
index daac3bf13..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/chown.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(chown,chown)
diff --git a/mdk-stage1/dietlibc/syscalls.s/chroot.S b/mdk-stage1/dietlibc/syscalls.s/chroot.S
deleted file mode 100644
index 65de1e473..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/chroot.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(chroot,chroot)
diff --git a/mdk-stage1/dietlibc/syscalls.s/close.S b/mdk-stage1/dietlibc/syscalls.s/close.S
deleted file mode 100644
index 361ca5272..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/close.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(close,close,__libc_close)
diff --git a/mdk-stage1/dietlibc/syscalls.s/dup.S b/mdk-stage1/dietlibc/syscalls.s/dup.S
deleted file mode 100644
index b2977fd43..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/dup.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(dup,dup)
diff --git a/mdk-stage1/dietlibc/syscalls.s/dup2.S b/mdk-stage1/dietlibc/syscalls.s/dup2.S
deleted file mode 100644
index 774bfbfe7..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/dup2.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(dup2,dup2)
diff --git a/mdk-stage1/dietlibc/syscalls.s/execve.S b/mdk-stage1/dietlibc/syscalls.s/execve.S
deleted file mode 100644
index ff952ae7d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/execve.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(execve,execve)
diff --git a/mdk-stage1/dietlibc/syscalls.s/exit.S b/mdk-stage1/dietlibc/syscalls.s/exit.S
deleted file mode 100644
index 11c989529..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/exit.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(exit,exit,_exit)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fchdir.S b/mdk-stage1/dietlibc/syscalls.s/fchdir.S
deleted file mode 100644
index 0aeaf610b..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fchdir.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fchdir,fchdir)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fchmod.S b/mdk-stage1/dietlibc/syscalls.s/fchmod.S
deleted file mode 100644
index 30bc2e210..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fchmod.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fchmod,fchmod)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fchown.S b/mdk-stage1/dietlibc/syscalls.s/fchown.S
deleted file mode 100644
index bc2a296ea..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fchown.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fchown,fchown)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fcntl.S b/mdk-stage1/dietlibc/syscalls.s/fcntl.S
deleted file mode 100644
index 2285929a0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fcntl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(fcntl,fcntl,__libc_fcntl)
diff --git a/mdk-stage1/dietlibc/syscalls.s/flock.S b/mdk-stage1/dietlibc/syscalls.s/flock.S
deleted file mode 100644
index 7b4daeff7..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/flock.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(flock,flock)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fork.S b/mdk-stage1/dietlibc/syscalls.s/fork.S
deleted file mode 100644
index b40c3f708..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fork.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(fork,fork,__libc_fork)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fstat.S b/mdk-stage1/dietlibc/syscalls.s/fstat.S
deleted file mode 100644
index 9dd465cda..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fstat.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fstat,fstat)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fstat64.S b/mdk-stage1/dietlibc/syscalls.s/fstat64.S
deleted file mode 100644
index 0c7a41609..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fstat64.S
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietfeatures.h"
-#include "syscalls.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-syscall(fstat64,__dietlibc_fstat64)
-#else
-syscall(fstat64,fstat64)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/fstatfs.S b/mdk-stage1/dietlibc/syscalls.s/fstatfs.S
deleted file mode 100644
index a23c8770c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fstatfs.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(fstatfs,fstatfs)
diff --git a/mdk-stage1/dietlibc/syscalls.s/fsync.S b/mdk-stage1/dietlibc/syscalls.s/fsync.S
deleted file mode 100644
index 66af59ef9..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/fsync.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(fsync,fsync,__libc_fsync)
diff --git a/mdk-stage1/dietlibc/syscalls.s/ftruncate.S b/mdk-stage1/dietlibc/syscalls.s/ftruncate.S
deleted file mode 100644
index dde57a615..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ftruncate.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ftruncate,ftruncate)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getcwd.S b/mdk-stage1/dietlibc/syscalls.s/getcwd.S
deleted file mode 100644
index e13262f20..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getcwd.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getcwd,__syscall_getcwd)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getdents.S b/mdk-stage1/dietlibc/syscalls.s/getdents.S
deleted file mode 100644
index f476e939d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getdents.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getdents,getdents)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getdents64.S b/mdk-stage1/dietlibc/syscalls.s/getdents64.S
deleted file mode 100644
index 16859addf..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getdents64.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_getdents64
-syscall(getdents64,getdents64)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/getegid.S b/mdk-stage1/dietlibc/syscalls.s/getegid.S
deleted file mode 100644
index 64843ee35..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getegid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getegid,getegid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/geteuid.S b/mdk-stage1/dietlibc/syscalls.s/geteuid.S
deleted file mode 100644
index 55dc00981..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/geteuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(geteuid,geteuid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getgid.S b/mdk-stage1/dietlibc/syscalls.s/getgid.S
deleted file mode 100644
index 39f092685..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getgid,getgid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getgroups.S b/mdk-stage1/dietlibc/syscalls.s/getgroups.S
deleted file mode 100644
index b4c57689c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getgroups.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getgroups,getgroups)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getitimer.S b/mdk-stage1/dietlibc/syscalls.s/getitimer.S
deleted file mode 100644
index 9a2084080..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getitimer.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getitimer,getitimer)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getpgid.S b/mdk-stage1/dietlibc/syscalls.s/getpgid.S
deleted file mode 100644
index e568f060f..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getpgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getpgid,getpgid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getpid.S b/mdk-stage1/dietlibc/syscalls.s/getpid.S
deleted file mode 100644
index 093884785..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getpid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getpid,getpid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getppid.S b/mdk-stage1/dietlibc/syscalls.s/getppid.S
deleted file mode 100644
index b05e64ae3..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getppid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getppid,getppid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getpriority.S b/mdk-stage1/dietlibc/syscalls.s/getpriority.S
deleted file mode 100644
index 848b27ed7..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getpriority.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getpriority,getpriority)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getresgid.S b/mdk-stage1/dietlibc/syscalls.s/getresgid.S
deleted file mode 100644
index a1d873c15..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getresgid.S
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_getresgid
-
-syscall(getresgid,getresgid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/getresuid.S b/mdk-stage1/dietlibc/syscalls.s/getresuid.S
deleted file mode 100644
index 62f6d764f..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getresuid.S
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __getresuid
-
-syscall(getresuid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/getrlimit.S b/mdk-stage1/dietlibc/syscalls.s/getrlimit.S
deleted file mode 100644
index 1c63c0196..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getrlimit.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getrlimit,getrlimit)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getrusage.S b/mdk-stage1/dietlibc/syscalls.s/getrusage.S
deleted file mode 100644
index 2972c4938..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getrusage.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getrusage,getrusage)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getsid.S b/mdk-stage1/dietlibc/syscalls.s/getsid.S
deleted file mode 100644
index cf5cce9d5..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getsid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getsid,getsid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/gettimeofday.S b/mdk-stage1/dietlibc/syscalls.s/gettimeofday.S
deleted file mode 100644
index f364b787a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/gettimeofday.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(gettimeofday,gettimeofday)
diff --git a/mdk-stage1/dietlibc/syscalls.s/getuid.S b/mdk-stage1/dietlibc/syscalls.s/getuid.S
deleted file mode 100644
index c53c25a7a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/getuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(getuid,getuid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/ioctl.S b/mdk-stage1/dietlibc/syscalls.s/ioctl.S
deleted file mode 100644
index 463d319dc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ioctl.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ioctl,ioctl)
diff --git a/mdk-stage1/dietlibc/syscalls.s/ioperm.S b/mdk-stage1/dietlibc/syscalls.s/ioperm.S
deleted file mode 100644
index 0acfde07a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ioperm.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ioperm,ioperm)
diff --git a/mdk-stage1/dietlibc/syscalls.s/iopl.S b/mdk-stage1/dietlibc/syscalls.s/iopl.S
deleted file mode 100644
index 06a6c53fb..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/iopl.S
+++ /dev/null
@@ -1,6 +0,0 @@
-
-#include "syscalls.h"
-
-#ifdef __NR_iopl
-syscall(iopl,iopl)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/ipc.S b/mdk-stage1/dietlibc/syscalls.s/ipc.S
deleted file mode 100644
index 40479400d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ipc.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ipc,__ipc)
diff --git a/mdk-stage1/dietlibc/syscalls.s/kill.S b/mdk-stage1/dietlibc/syscalls.s/kill.S
deleted file mode 100644
index eb466dd33..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/kill.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(kill,kill)
diff --git a/mdk-stage1/dietlibc/syscalls.s/lchown.S b/mdk-stage1/dietlibc/syscalls.s/lchown.S
deleted file mode 100644
index 19dfefaef..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/lchown.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(lchown,lchown)
diff --git a/mdk-stage1/dietlibc/syscalls.s/link.S b/mdk-stage1/dietlibc/syscalls.s/link.S
deleted file mode 100644
index 8015d11c8..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/link.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(link,link)
diff --git a/mdk-stage1/dietlibc/syscalls.s/llseek.S b/mdk-stage1/dietlibc/syscalls.s/llseek.S
deleted file mode 100644
index 0318b492e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/llseek.S
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "dietfeatures.h"
-#include "syscalls.h"
-
-#ifdef __NR__llseek
-syscall(_llseek,llseek)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/lseek.S b/mdk-stage1/dietlibc/syscalls.s/lseek.S
deleted file mode 100644
index 93707a22a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/lseek.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(lseek,lseek,__libc_lseek)
diff --git a/mdk-stage1/dietlibc/syscalls.s/lstat.S b/mdk-stage1/dietlibc/syscalls.s/lstat.S
deleted file mode 100644
index 5720161c0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/lstat.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(lstat,lstat)
diff --git a/mdk-stage1/dietlibc/syscalls.s/lstat64.S b/mdk-stage1/dietlibc/syscalls.s/lstat64.S
deleted file mode 100644
index 33fd5ab94..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/lstat64.S
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietfeatures.h"
-#include "syscalls.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-syscall(lstat64,__dietlibc_lstat64)
-#else
-syscall(lstat64,lstat64)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/mkdir.S b/mdk-stage1/dietlibc/syscalls.s/mkdir.S
deleted file mode 100644
index d6214ee46..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mkdir.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mkdir,mkdir)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mknod.S b/mdk-stage1/dietlibc/syscalls.s/mknod.S
deleted file mode 100644
index c1b2af12d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mknod.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mknod,mknod)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mlockall.S b/mdk-stage1/dietlibc/syscalls.s/mlockall.S
deleted file mode 100644
index 6ad0eef9d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mlockall.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mlockall,mlockall)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mount.S b/mdk-stage1/dietlibc/syscalls.s/mount.S
deleted file mode 100644
index 2fd845561..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mount.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mount,mount)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mprotect.S b/mdk-stage1/dietlibc/syscalls.s/mprotect.S
deleted file mode 100644
index 73e9a8e17..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mprotect.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mprotect,mprotect)
diff --git a/mdk-stage1/dietlibc/syscalls.s/mremap.S b/mdk-stage1/dietlibc/syscalls.s/mremap.S
deleted file mode 100644
index 259ccec99..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/mremap.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(mremap,mremap)
diff --git a/mdk-stage1/dietlibc/syscalls.s/munlockall.S b/mdk-stage1/dietlibc/syscalls.s/munlockall.S
deleted file mode 100644
index 776811dea..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/munlockall.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(munlockall,munlockall)
diff --git a/mdk-stage1/dietlibc/syscalls.s/munmap.S b/mdk-stage1/dietlibc/syscalls.s/munmap.S
deleted file mode 100644
index b43a7b22d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/munmap.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(munmap,munmap)
diff --git a/mdk-stage1/dietlibc/syscalls.s/nanosleep.S b/mdk-stage1/dietlibc/syscalls.s/nanosleep.S
deleted file mode 100644
index 279a52604..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/nanosleep.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(nanosleep,nanosleep,__libc_nanosleep)
diff --git a/mdk-stage1/dietlibc/syscalls.s/nice.S b/mdk-stage1/dietlibc/syscalls.s/nice.S
deleted file mode 100644
index 7d3f740b2..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/nice.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(nice,nice)
diff --git a/mdk-stage1/dietlibc/syscalls.s/open.S b/mdk-stage1/dietlibc/syscalls.s/open.S
deleted file mode 100644
index 280efd0d9..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/open.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(open,open,__libc_open)
diff --git a/mdk-stage1/dietlibc/syscalls.s/pause.S b/mdk-stage1/dietlibc/syscalls.s/pause.S
deleted file mode 100644
index cdf42cabd..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/pause.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(pause,pause,__libc_pause)
diff --git a/mdk-stage1/dietlibc/syscalls.s/personality.S b/mdk-stage1/dietlibc/syscalls.s/personality.S
deleted file mode 100644
index 34b467084..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/personality.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_personality
-syscall(personality,personality)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/pipe.S b/mdk-stage1/dietlibc/syscalls.s/pipe.S
deleted file mode 100644
index 03994d055..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/pipe.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(pipe,pipe)
diff --git a/mdk-stage1/dietlibc/syscalls.s/poll.S b/mdk-stage1/dietlibc/syscalls.s/poll.S
deleted file mode 100644
index 359f55ddd..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/poll.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(poll,poll)
diff --git a/mdk-stage1/dietlibc/syscalls.s/ptrace.s b/mdk-stage1/dietlibc/syscalls.s/ptrace.s
deleted file mode 100644
index 392e6a4ed..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/ptrace.s
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(ptrace,ptrace)
diff --git a/mdk-stage1/dietlibc/syscalls.s/pwrite.S b/mdk-stage1/dietlibc/syscalls.s/pwrite.S
deleted file mode 100644
index f52ead7b2..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/pwrite.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(pwrite,__pwrite)
diff --git a/mdk-stage1/dietlibc/syscalls.s/query_module.S b/mdk-stage1/dietlibc/syscalls.s/query_module.S
deleted file mode 100644
index cb2f1d852..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/query_module.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_query_module
-syscall(query_module,query_module)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/read.S b/mdk-stage1/dietlibc/syscalls.s/read.S
deleted file mode 100644
index 33fdb7531..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/read.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(read,read,__libc_read)
diff --git a/mdk-stage1/dietlibc/syscalls.s/readlink.S b/mdk-stage1/dietlibc/syscalls.s/readlink.S
deleted file mode 100644
index 850e77c4e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/readlink.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(readlink,readlink)
diff --git a/mdk-stage1/dietlibc/syscalls.s/readv.S b/mdk-stage1/dietlibc/syscalls.s/readv.S
deleted file mode 100644
index 757c26bfb..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/readv.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(readv,readv)
diff --git a/mdk-stage1/dietlibc/syscalls.s/rename.S b/mdk-stage1/dietlibc/syscalls.s/rename.S
deleted file mode 100644
index f92f1dc5d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/rename.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(rename,rename)
diff --git a/mdk-stage1/dietlibc/syscalls.s/rmdir.S b/mdk-stage1/dietlibc/syscalls.s/rmdir.S
deleted file mode 100644
index 341216e8c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/rmdir.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(rmdir,rmdir)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S b/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S
deleted file mode 100644
index caf403672..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_get_priority_max,sched_get_priority_max)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S b/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S
deleted file mode 100644
index a0c3337dc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_get_priority_min,sched_get_priority_min)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_getparam.S b/mdk-stage1/dietlibc/syscalls.s/sched_getparam.S
deleted file mode 100644
index 7190a40ae..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_getparam.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_getparam,sched_getparam)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S b/mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S
deleted file mode 100644
index 08709b65e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_getscheduler,sched_getscheduler)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S b/mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S
deleted file mode 100644
index 150b9a98d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_rr_get_interval,sched_rr_get_interval)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_setparam.S b/mdk-stage1/dietlibc/syscalls.s/sched_setparam.S
deleted file mode 100644
index 3a6dd1dcc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_setparam.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_setparam,sched_setparam)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S b/mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S
deleted file mode 100644
index 27869d6ce..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_setscheduler,sched_setscheduler)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sched_yield.S b/mdk-stage1/dietlibc/syscalls.s/sched_yield.S
deleted file mode 100644
index ccb9ac1d0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sched_yield.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sched_yield,sched_yield)
diff --git a/mdk-stage1/dietlibc/syscalls.s/select.S b/mdk-stage1/dietlibc/syscalls.s/select.S
deleted file mode 100644
index f585d0449..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/select.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(select,select)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sendfile.S b/mdk-stage1/dietlibc/syscalls.s/sendfile.S
deleted file mode 100644
index 12d6195dd..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sendfile.S
+++ /dev/null
@@ -1,6 +0,0 @@
-#include "syscalls.h"
-#include "dietwarning.h"
-
-syscall_weak(sendfile,sendfile,__libc_sendfile)
-
-link_warning(sendfile,"sendfile is not portable and does not support large files")
diff --git a/mdk-stage1/dietlibc/syscalls.s/setdomainname.S b/mdk-stage1/dietlibc/syscalls.s/setdomainname.S
deleted file mode 100644
index eaade25da..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setdomainname.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setdomainname,setdomainname)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setgid.S b/mdk-stage1/dietlibc/syscalls.s/setgid.S
deleted file mode 100644
index 69b18a9c9..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setgid,setgid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setgroups.S b/mdk-stage1/dietlibc/syscalls.s/setgroups.S
deleted file mode 100644
index ce8e800a6..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setgroups.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setgroups,setgroups)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sethostname.S b/mdk-stage1/dietlibc/syscalls.s/sethostname.S
deleted file mode 100644
index 7616d4848..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sethostname.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sethostname,sethostname)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setitimer.S b/mdk-stage1/dietlibc/syscalls.s/setitimer.S
deleted file mode 100644
index bcb0623ba..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setitimer.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setitimer,setitimer)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setpgid.S b/mdk-stage1/dietlibc/syscalls.s/setpgid.S
deleted file mode 100644
index e93db31dc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setpgid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setpgid,setpgid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setpriority.S b/mdk-stage1/dietlibc/syscalls.s/setpriority.S
deleted file mode 100644
index 57d7bc388..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setpriority.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setpriority,setpriority)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setregid.S b/mdk-stage1/dietlibc/syscalls.s/setregid.S
deleted file mode 100644
index 3a7abbc28..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setregid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setregid,setregid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setresgid.S b/mdk-stage1/dietlibc/syscalls.s/setresgid.S
deleted file mode 100644
index 64cbac94e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setresgid.S
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __setresgid
-
-syscall(setresgid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/setresuid.S b/mdk-stage1/dietlibc/syscalls.s/setresuid.S
deleted file mode 100644
index 20b6abee9..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setresuid.S
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __setresuid
-
-syscall(setresuid)
-
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/setreuid.S b/mdk-stage1/dietlibc/syscalls.s/setreuid.S
deleted file mode 100644
index 33ca8deed..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setreuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setreuid,setreuid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setrlimit.S b/mdk-stage1/dietlibc/syscalls.s/setrlimit.S
deleted file mode 100644
index 605105658..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setrlimit.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setrlimit,setrlimit)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setsid.S b/mdk-stage1/dietlibc/syscalls.s/setsid.S
deleted file mode 100644
index d1ef1c58e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setsid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setsid,setsid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/setuid.S b/mdk-stage1/dietlibc/syscalls.s/setuid.S
deleted file mode 100644
index d20571cbf..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/setuid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(setuid,setuid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigaction.S b/mdk-stage1/dietlibc/syscalls.s/sigaction.S
deleted file mode 100644
index 32382870c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigaction.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sigaction,sigaction)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigaltstack.S b/mdk-stage1/dietlibc/syscalls.s/sigaltstack.S
deleted file mode 100644
index b07d90f40..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigaltstack.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(sigaltstack,sigaltstack,__sigaltstack)
diff --git a/mdk-stage1/dietlibc/syscalls.s/signal.S b/mdk-stage1/dietlibc/syscalls.s/signal.S
deleted file mode 100644
index 86c4d5db0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/signal.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(signal,signal)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigpending.S b/mdk-stage1/dietlibc/syscalls.s/sigpending.S
deleted file mode 100644
index 08715bef5..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigpending.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sigpending,sigpending)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigprocmask.S b/mdk-stage1/dietlibc/syscalls.s/sigprocmask.S
deleted file mode 100644
index 07f5b9d26..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigprocmask.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(sigprocmask,sigprocmask,__sigprocmask)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sigsuspend.S b/mdk-stage1/dietlibc/syscalls.s/sigsuspend.S
deleted file mode 100644
index 062264ab6..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sigsuspend.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(sigsuspend,sigsuspend,__libc_sigsuspend)
diff --git a/mdk-stage1/dietlibc/syscalls.s/socketcall.S b/mdk-stage1/dietlibc/syscalls.s/socketcall.S
deleted file mode 100644
index 5837c049a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/socketcall.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(socketcall,socketcall)
diff --git a/mdk-stage1/dietlibc/syscalls.s/stat.S b/mdk-stage1/dietlibc/syscalls.s/stat.S
deleted file mode 100644
index 2aa3bc088..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/stat.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(stat,stat)
diff --git a/mdk-stage1/dietlibc/syscalls.s/stat64.S b/mdk-stage1/dietlibc/syscalls.s/stat64.S
deleted file mode 100644
index 734fcab20..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/stat64.S
+++ /dev/null
@@ -1,8 +0,0 @@
-#include "dietfeatures.h"
-#include "syscalls.h"
-
-#ifdef WANT_LARGEFILE_BACKCOMPAT
-syscall(stat64,__dietlibc_stat64)
-#else
-syscall(stat64,stat64)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/statfs.S b/mdk-stage1/dietlibc/syscalls.s/statfs.S
deleted file mode 100644
index 7560f569d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/statfs.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(statfs,statfs)
diff --git a/mdk-stage1/dietlibc/syscalls.s/stime.S b/mdk-stage1/dietlibc/syscalls.s/stime.S
deleted file mode 100644
index 9d9f5bf0a..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/stime.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(stime,stime)
diff --git a/mdk-stage1/dietlibc/syscalls.s/swapoff.S b/mdk-stage1/dietlibc/syscalls.s/swapoff.S
deleted file mode 100644
index f75ec94e0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/swapoff.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(swapoff,swapoff)
diff --git a/mdk-stage1/dietlibc/syscalls.s/swapon.S b/mdk-stage1/dietlibc/syscalls.s/swapon.S
deleted file mode 100644
index d10594168..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/swapon.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(swapon,swapon)
diff --git a/mdk-stage1/dietlibc/syscalls.s/symlink.S b/mdk-stage1/dietlibc/syscalls.s/symlink.S
deleted file mode 100644
index 07a6a7fdc..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/symlink.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(symlink,symlink)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sync.S b/mdk-stage1/dietlibc/syscalls.s/sync.S
deleted file mode 100644
index 1ee021693..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sync.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sync,sync)
diff --git a/mdk-stage1/dietlibc/syscalls.s/sysctl.S b/mdk-stage1/dietlibc/syscalls.s/sysctl.S
deleted file mode 100644
index 536e62b3d..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sysctl.S
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "syscalls.h"
-
-#ifdef __NR_sysctl
-syscall(sysctl,_sysctl)
-#endif
diff --git a/mdk-stage1/dietlibc/syscalls.s/sysinfo.S b/mdk-stage1/dietlibc/syscalls.s/sysinfo.S
deleted file mode 100644
index eaec7941e..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/sysinfo.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(sysinfo,sysinfo)
diff --git a/mdk-stage1/dietlibc/syscalls.s/syslog.S b/mdk-stage1/dietlibc/syscalls.s/syslog.S
deleted file mode 100644
index 6af3c4eac..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/syslog.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(syslog,__syscall_syslog)
diff --git a/mdk-stage1/dietlibc/syscalls.s/time.S b/mdk-stage1/dietlibc/syscalls.s/time.S
deleted file mode 100644
index 26c79091c..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/time.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(time,time)
diff --git a/mdk-stage1/dietlibc/syscalls.s/times.S b/mdk-stage1/dietlibc/syscalls.s/times.S
deleted file mode 100644
index dcc8a6dd0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/times.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(times,times)
diff --git a/mdk-stage1/dietlibc/syscalls.s/truncate.S b/mdk-stage1/dietlibc/syscalls.s/truncate.S
deleted file mode 100644
index 7052bdcee..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/truncate.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(truncate,truncate)
diff --git a/mdk-stage1/dietlibc/syscalls.s/umask.S b/mdk-stage1/dietlibc/syscalls.s/umask.S
deleted file mode 100644
index 9f8ffeda6..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/umask.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(umask,umask)
diff --git a/mdk-stage1/dietlibc/syscalls.s/umount.S b/mdk-stage1/dietlibc/syscalls.s/umount.S
deleted file mode 100644
index 4a423d964..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/umount.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(umount,umount)
diff --git a/mdk-stage1/dietlibc/syscalls.s/umount2.S b/mdk-stage1/dietlibc/syscalls.s/umount2.S
deleted file mode 100644
index 4cdd6a200..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/umount2.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(umount2,umount2)
diff --git a/mdk-stage1/dietlibc/syscalls.s/uname.S b/mdk-stage1/dietlibc/syscalls.s/uname.S
deleted file mode 100644
index a460d2aa6..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/uname.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(uname,uname)
diff --git a/mdk-stage1/dietlibc/syscalls.s/unlink.S b/mdk-stage1/dietlibc/syscalls.s/unlink.S
deleted file mode 100644
index bd6713061..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/unlink.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(unlink,unlink)
diff --git a/mdk-stage1/dietlibc/syscalls.s/utime.S b/mdk-stage1/dietlibc/syscalls.s/utime.S
deleted file mode 100644
index 08cd22158..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/utime.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(utime,utime)
diff --git a/mdk-stage1/dietlibc/syscalls.s/vhangup.S b/mdk-stage1/dietlibc/syscalls.s/vhangup.S
deleted file mode 100644
index 6e2d1d343..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/vhangup.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(vhangup,vhangup)
diff --git a/mdk-stage1/dietlibc/syscalls.s/wait4.S b/mdk-stage1/dietlibc/syscalls.s/wait4.S
deleted file mode 100644
index ca6773569..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/wait4.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(wait4,wait4)
diff --git a/mdk-stage1/dietlibc/syscalls.s/waitpid.S b/mdk-stage1/dietlibc/syscalls.s/waitpid.S
deleted file mode 100644
index 5cdc18afb..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/waitpid.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(waitpid,waitpid,__libc_waitpid)
diff --git a/mdk-stage1/dietlibc/syscalls.s/write.S b/mdk-stage1/dietlibc/syscalls.s/write.S
deleted file mode 100644
index ba20395df..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/write.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall_weak(write,write,__libc_write)
diff --git a/mdk-stage1/dietlibc/syscalls.s/writev.S b/mdk-stage1/dietlibc/syscalls.s/writev.S
deleted file mode 100644
index 8ec7aa6b0..000000000
--- a/mdk-stage1/dietlibc/syscalls.s/writev.S
+++ /dev/null
@@ -1,3 +0,0 @@
-#include "syscalls.h"
-
-syscall(writev,writev)
diff --git a/mdk-stage1/disk.c b/mdk-stage1/disk.c
deleted file mode 100644
index 8488a767e..000000000
--- a/mdk-stage1/disk.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-#include "lomount.h"
-#include "automatic.h"
-
-#include "disk.h"
-
-struct partition_detection_anchor {
- off_t offset;
- const char * anchor;
-};
-
-static int seek_and_compare(int fd, struct partition_detection_anchor anch)
-{
- char buf[500];
- size_t count;
- if (lseek(fd, anch.offset, SEEK_SET) == (off_t)-1) {
- log_perror("seek failed");
- return -1;
- }
- count = read(fd, buf, strlen(anch.anchor));
- if (count != strlen(anch.anchor)) {
- log_perror("read failed");
- return -1;
- }
- buf[count] = '\0';
- if (strcmp(anch.anchor, buf))
- return 1;
- return 0;
-}
-
-static const char * detect_partition_type(char * dev)
-{
- struct partition_detection_info {
- const char * name;
- struct partition_detection_anchor anchor0;
- struct partition_detection_anchor anchor1;
- struct partition_detection_anchor anchor2;
- };
- struct partition_detection_info partitions_signatures[] = {
- { "Linux Swap", { 4086, "SWAP-SPACE" }, { 0, NULL }, { 0, NULL } },
- { "Linux Swap", { 4086, "SWAPSPACE2" }, { 0, NULL }, { 0, NULL } },
- { "Ext2", { 0x438, "\x53\xEF" }, { 0, NULL }, { 0, NULL } },
- { "ReiserFS", { 0x10034, "ReIsErFs" }, { 0, NULL }, { 0, NULL } },
- { "ReiserFS", { 0x10034, "ReIsEr2Fs" }, { 0, NULL }, { 0, NULL } },
- { "XFS", { 0, "XFSB" }, { 0x200, "XAGF" }, { 0x400, "XAGI" } },
- { "JFS", { 0x8000, "JFS1" }, { 0, NULL }, { 0, NULL } },
- { "NTFS", { 0x1FE, "\x55\xAA" }, { 0x3, "NTFS" }, { 0, NULL } },
- { "FAT32", { 0x1FE, "\x55\xAA" }, { 0x52, "FAT32" }, { 0, NULL } },
- { "FAT", { 0x1FE, "\x55\xAA" }, { 0x36, "FAT" }, { 0, NULL } },
- { "Linux LVM", { 0, "HM\1\0" }, { 0, NULL }, { 0, NULL } }
- };
- int partitions_signatures_nb = sizeof(partitions_signatures) / sizeof(struct partition_detection_info);
- int i;
- int fd;
-
- char device_fullname[50];
- strcpy(device_fullname, "/dev/");
- strcat(device_fullname, dev);
-
- if (ensure_dev_exists(device_fullname))
- return NULL;
- log_message("guessing type of %s", device_fullname);
-
- if ((fd = open(device_fullname, O_RDONLY, 0)) < 0) {
- log_perror("open");
- return NULL;
- }
-
- for (i=0; i<partitions_signatures_nb; i++) {
- int results = seek_and_compare(fd, partitions_signatures[i].anchor0);
- if (results == -1)
- goto detect_partition_type_end;
- if (results == 1)
- continue;
- if (!partitions_signatures[i].anchor1.anchor)
- goto detect_partition_found_it;
-
- results = seek_and_compare(fd, partitions_signatures[i].anchor1);
- if (results == -1)
- goto detect_partition_type_end;
- if (results == 1)
- continue;
- if (!partitions_signatures[i].anchor2.anchor)
- goto detect_partition_found_it;
-
- results = seek_and_compare(fd, partitions_signatures[i].anchor2);
- if (results == -1)
- goto detect_partition_type_end;
- if (results == 1)
- continue;
-
- detect_partition_found_it:
- return partitions_signatures[i].name;
- }
-
- detect_partition_type_end:
- close(fd);
- return NULL;
-}
-
-static char * disk_extract_list_directory(char * direct)
-{
- char ** full = list_directory(direct);
- char tmp[2000] = "";
- int i;
- for (i=0; i<5 ; i++) {
- if (!full || !*full)
- break;
- strcat(tmp, *full);
- strcat(tmp, "\n");
- full++;
- }
- return strdup(tmp);
-}
-
-static enum return_type try_with_device(char *dev_name)
-{
- char * questions_location[] = { "Directory or ISO image", NULL };
- char * questions_location_auto[] = { "directory", NULL };
- static char ** answers_location = NULL;
- char device_fullname[50];
- char location_full[500];
-
- char * disk_own_mount = "/tmp/hdimage";
-
- int major, minor, blocks;
- char name[100];
-
- char buf[512];
- FILE * f;
- char * parts[50];
- char * parts_comments[50];
- struct stat statbuf;
- int i = 0;
- enum return_type results;
- char * choice;
-
- if (!(f = fopen("/proc/partitions", "rb")) || !fgets(buf, sizeof(buf), f) || !fgets(buf, sizeof(buf), f)) {
- log_perror(dev_name);
- stg1_error_message("Could not read partitions information.");
- return RETURN_ERROR;
- }
-
- while (fgets(buf, sizeof(buf), f)) {
- bzero(name, sizeof(name));
- sscanf(buf, " %d %d %d %s", &major, &minor, &blocks, name);
- if ((strstr(name, dev_name) == name) && (blocks > 1) && (name[strlen(dev_name)] != '\0')) {
- const char * partition_type = detect_partition_type(name);
- parts[i] = strdup(name);
- parts_comments[i] = (char *) malloc(sizeof(char) * 100);
- sprintf(parts_comments[i], "size: %d Mbytes", blocks >> 10);
- if (partition_type) {
- strcat(parts_comments[i], ", type: ");
- strcat(parts_comments[i], partition_type);
- }
- i++;
- }
- }
- parts[i] = NULL;
- fclose(f);
-
- if (parts[0] == NULL) {
- stg1_error_message("No partitions found.");
- return RETURN_ERROR;
- }
-
- results = ask_from_list_comments_auto("Please choose the partition where " DISTRIB_NAME " is copied.",
- parts, parts_comments, &choice, "partition", parts);
- if (results != RETURN_OK)
- return results;
-
- strcpy(device_fullname, "/dev/");
- strcat(device_fullname, choice);
-
- if (my_mount(device_fullname, disk_own_mount, "ext2", 0) == -1 &&
- my_mount(device_fullname, disk_own_mount, "vfat", 0) == -1 &&
- my_mount(device_fullname, disk_own_mount, "reiserfs", 0) == -1) {
- stg1_error_message("I can't find a valid filesystem (tried: ext2, vfat, reiserfs).");
- return try_with_device(dev_name);
- }
-
- if (ask_from_entries_auto("Please enter the directory (or ISO image file) containing the " DISTRIB_NAME " Distribution.",
- questions_location, &answers_location, 24, questions_location_auto, NULL) != RETURN_OK) {
- umount(disk_own_mount);
- return try_with_device(dev_name);
- }
-
- strcpy(location_full, disk_own_mount);
- strcat(location_full, "/");
- strcat(location_full, answers_location[0]);
-
- if (access(location_full, R_OK)) {
- stg1_error_message("Directory or ISO image file could not be found on partition.\n"
- "Here's a short extract of the files in the root of the partition:\n"
- "%s", disk_extract_list_directory(disk_own_mount));
- umount(disk_own_mount);
- return try_with_device(dev_name);
- }
-
- unlink(IMAGE_LOCATION);
-
- if (!stat(location_full, &statbuf) && !S_ISDIR(statbuf.st_mode)) {
- log_message("%s exists and is not a directory, assuming this is an ISO image", location_full);
- if (lomount(location_full, IMAGE_LOCATION)) {
- stg1_error_message("Could not mount file %s as an ISO image of the " DISTRIB_NAME " Distribution.", answers_location[0]);
- umount(disk_own_mount);
- return try_with_device(dev_name);
- }
- } else
- symlink(location_full, IMAGE_LOCATION);
-
- if (IS_SPECIAL_STAGE2 || ramdisk_possible()) {
- /* RAMDISK install */
- if (access(IMAGE_LOCATION RAMDISK_LOCATION, R_OK)) {
- stg1_error_message("I can't find the " DISTRIB_NAME " Distribution in the specified directory. "
- "(I need the subdirectory " RAMDISK_LOCATION ")\n"
- "Here's a short extract of the files in the directory:\n"
- "%s", disk_extract_list_directory(IMAGE_LOCATION));
- loumount();
- umount(disk_own_mount);
- return try_with_device(dev_name);
- }
- if (load_ramdisk() != RETURN_OK) {
- stg1_error_message("Could not load program into memory.");
- loumount();
- umount(disk_own_mount);
- return try_with_device(dev_name);
- }
- } else {
- /* LIVE install */
- char p;
- if (access(IMAGE_LOCATION LIVE_LOCATION, R_OK)) {
- stg1_error_message("I can't find the " DISTRIB_NAME " Distribution in the specified directory. "
- "(I need the subdirectory " LIVE_LOCATION ")\n"
- "Here's a short extract of the files in the directory:\n"
- "%s", disk_extract_list_directory(IMAGE_LOCATION));
- loumount();
- umount(disk_own_mount);
- return try_with_device(dev_name);
- }
- if (readlink(IMAGE_LOCATION LIVE_LOCATION "/usr/bin/runinstall2", &p, 1) != 1) {
- stg1_error_message("The " DISTRIB_NAME " Distribution seems to be copied on a Windows partition. "
- "You need more memory to perform an installation from a Windows partition. "
- "Another solution if to copy the " DISTRIB_NAME " Distribution on a Linux partition.");
- loumount();
- umount(disk_own_mount);
- return try_with_device(dev_name);
- }
- log_message("found the " DISTRIB_NAME " Installation, good news!");
- }
-
- if (IS_RESCUE) {
- loumount();
- umount(disk_own_mount);
- }
-
- method_name = strdup("disk");
- return RETURN_OK;
-}
-
-enum return_type disk_prepare(void)
-{
- char ** medias, ** ptr, ** medias_models;
- char * choice;
- int i, count = 0;
- enum return_type results;
-
- my_insmod("sd_mod", ANY_DRIVER_TYPE, NULL);
-
- get_medias(DISK, &medias, &medias_models);
-
- ptr = medias;
- while (ptr && *ptr) {
- count++;
- ptr++;
- }
-
- if (count == 0) {
- stg1_error_message("No DISK drive found.");
- i = ask_insmod(SCSI_ADAPTERS);
- if (i == RETURN_BACK)
- return RETURN_BACK;
- return disk_prepare();
- }
-
- if (count == 1) {
- results = try_with_device(*medias);
- if (results == RETURN_OK)
- return RETURN_OK;
- i = ask_insmod(SCSI_ADAPTERS);
- if (i == RETURN_BACK)
- return RETURN_BACK;
- return disk_prepare();
- }
-
- results = ask_from_list_comments_auto("Please choose the DISK drive on which you copied the " DISTRIB_NAME " Distribution.",
- medias, medias_models, &choice, "disk", medias);
-
- if (results != RETURN_OK)
- return results;
-
- results = try_with_device(choice);
- if (results == RETURN_OK)
- return RETURN_OK;
- i = ask_insmod(SCSI_ADAPTERS);
- if (i == RETURN_BACK)
- return RETURN_BACK;
- return disk_prepare();
-}
diff --git a/mdk-stage1/disk.h b/mdk-stage1/disk.h
deleted file mode 100644
index 54213cf68..000000000
--- a/mdk-stage1/disk.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#ifndef _DISK_H_
-#define _DISK_H_
-
-enum return_type disk_prepare(void);
-
-#endif
diff --git a/mdk-stage1/dns.c b/mdk-stage1/dns.c
deleted file mode 100644
index d1e67c78d..000000000
--- a/mdk-stage1/dns.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#include <stdlib.h>
-
-// dietlibc can do hostname lookup, whereas glibc can't when linked statically :-(
-
-#ifdef __LIBC_DIETLIBC__
-
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <netdb.h>
-#include <sys/socket.h>
-
-#include "network.h"
-#include "log.h"
-
-#include "dns.h"
-
-int mygethostbyname(char * name, struct in_addr * addr)
-{
- struct hostent * h = gethostbyname(name);
- if (!h) {
- if (domain) {
- // gethostbyname from dietlibc doesn't support domain handling
- char fully_qualified[500];
- sprintf(fully_qualified, "%s.%s", name, domain);
- h = gethostbyname(fully_qualified);
- if (!h) {
- log_message("unknown host %s", name);
- return -1;
- }
- } else
- return -1;
- }
-
- if (h->h_addr_list && (h->h_addr_list)[0]) {
- memcpy(addr, (h->h_addr_list)[0], sizeof(*addr));
- log_message("is-at: %s", inet_ntoa(*addr));
- return 0;
- }
- return -1;
-}
-
-char * mygethostbyaddr(char * ipnum)
-{
- struct in_addr in;
- struct hostent * host;
- if (!inet_aton(ipnum, &in))
- return NULL;
- host = gethostbyaddr(&in, strlen((void *) &in), AF_INET);
- if (host && host->h_name)
- return host->h_name;
- return NULL;
-}
-
-
-#else // __LIBC_DIETLIBC__
-
-#include <alloca.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <resolv.h>
-#include <arpa/nameser.h>
-#include <arpa/inet.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "log.h"
-
-#include "dns.h"
-
-/* This is dumb, but glibc doesn't like to do hostname lookups w/o libc.so */
-
-union dns_response {
- HEADER hdr;
- u_char buf[PACKETSZ];
-} ;
-
-static int do_query(char * query, int queryType, char ** domainName, struct in_addr * ipNum)
-{
- int len, ancount, type;
- u_char * data, * end;
- char name[MAXDNAME];
- union dns_response response;
-
-#ifdef __sparc__
- /* from jj: */
- /* We have to wait till ethernet negotiation is done */
- _res.retry = 3;
-#else
- _res.retry = 2;
-#endif
-
-
- len = res_search(query, C_IN, queryType, (void *) &response, sizeof(response));
- if (len <= 0)
- return -1;
-
- if (ntohs(response.hdr.rcode) != NOERROR)
- return -1;
-
- ancount = ntohs(response.hdr.ancount);
- if (ancount < 1)
- return -1;
-
- data = response.buf + sizeof(HEADER);
- end = response.buf + len;
-
- /* skip the question */
- data += dn_skipname(data, end) + QFIXEDSZ;
-
- /* parse the answer(s) */
- while (--ancount >= 0 && data < end) {
-
- /* skip the domain name portion of the RR record */
- data += dn_skipname(data, end);
-
- /* get RR information */
- GETSHORT(type, data);
- data += INT16SZ; /* skipp class */
- data += INT32SZ; /* skipp TTL */
- GETSHORT(len, data);
-
- if (type == T_PTR) {
- /* we got a pointer */
- len = dn_expand(response.buf, end, data, name, sizeof(name));
- if (len <= 0) return -1;
- if (queryType == T_PTR && domainName) {
- /* we wanted a pointer */
- *domainName = malloc(strlen(name) + 1);
- strcpy(*domainName, name);
- return 0;
- }
- } else if (type == T_A) {
- /* we got an address */
- if (queryType == T_A && ipNum) {
- /* we wanted an address */
- memcpy(ipNum, data, sizeof(*ipNum));
- return 0;
- }
- }
-
- /* move ahead to next RR */
- data += len;
- }
-
- return -1;
-}
-
-char * mygethostbyaddr(char * ipnum) {
- int rc;
- char * result;
- char * strbuf;
- char * chptr;
- char * splits[4];
- int i;
-
- _res.retry = 1;
-
- strbuf = alloca(strlen(ipnum) + 1);
- strcpy(strbuf, ipnum);
-
- ipnum = alloca(strlen(strbuf) + 20);
-
- for (i = 0; i < 4; i++) {
- chptr = strbuf;
- while (*chptr && *chptr != '.')
- chptr++;
- *chptr = '\0';
-
- if (chptr - strbuf > 3) return NULL;
- splits[i] = strbuf;
- strbuf = chptr + 1;
- }
-
- sprintf(ipnum, "%s.%s.%s.%s.in-addr.arpa", splits[3], splits[2], splits[1], splits[0]);
-
- rc = do_query(ipnum, T_PTR, &result, NULL);
-
- if (rc)
- return NULL;
- else
- return result;
-}
-
-int mygethostbyname(char * name, struct in_addr * addr) {
- int rc = do_query(name, T_A, NULL, addr);
- if (!rc)
- log_message("is-at %s", inet_ntoa(*addr));
- return rc;
-}
-
-#endif
diff --git a/mdk-stage1/dns.h b/mdk-stage1/dns.h
deleted file mode 100644
index 97af9c08a..000000000
--- a/mdk-stage1/dns.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#ifndef H_DNS
-#define H_DNS
-
-#include <netinet/in.h>
-
-int mygethostbyname(char * name, struct in_addr * addr);
-char * mygethostbyaddr(char * ipnum);
-
-#endif
diff --git a/mdk-stage1/doc/HACKING b/mdk-stage1/doc/HACKING
deleted file mode 100644
index d196c8010..000000000
--- a/mdk-stage1/doc/HACKING
+++ /dev/null
@@ -1,31 +0,0 @@
-If you have to boot pretty often, you'll appreciate to speed the things up
-a little.
-
-Here's what we use: the GRUB feature to boot from the network using the
-DHCP protocol and the TFTP protocol.
-
-Here's the "menu.lst" to do that:
-
--=-=--
-
-timeout 0
-
-title linux
-dhcp
-tftpserver 192.168.1.17
-kernel (nd)/tftpboot/gc/vmlinuz ramdisk=32000 vga=788
-initrd (nd)/tftpboot/gc/network.rdz
-
--=-=--
-
-
-The option "tftpserver" is used to override the tftpserver address given
-as an answer by the DHCP server. That way, you'll not need to bother your
-system administrator to modify his dhcp server configuration.
-
-The directory /tftpboot seems to be the only one defaultly accepted by the
-server, and its subdirs.
-
-
-Of course, your GRUB needs to be compiled with the specific code for your
-network card; use ./configure --help in the GRUB build dir for more infos.
diff --git a/mdk-stage1/doc/README b/mdk-stage1/doc/README
deleted file mode 100644
index 09edce6c2..000000000
--- a/mdk-stage1/doc/README
+++ /dev/null
@@ -1,185 +0,0 @@
--------------------------------------------------------
-* Stage1 of the Mandrake Linux installation program *
--------------------------------------------------------
-
-
-[ Author ]
-
- Guillaume Cottenceau (gc@mandrakesoft.com)
-
-
-[ Copyright ]
-
- Copyright 2000 MandrakeSoft
-
- Partially inspired by Redhat stuff (install from 5.x and 7.x) copyright
- Red Hat Software, and Debian stuff (boot-floppies) copyright by their
- respective holders.
-
-
-[ Licence ]
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-
- *** WARNING! ***
-
- This General Public License does not permit incorporating any part
- of this program as a library into proprietary programs.
-
-
-[ Online ]
-
- http://us.mandrakesoft.com/~gc/html/stage1.html
-
-
-[ Purpose ]
-
- This code will take the control of the computer after that Linux
- kernel booted properly, and will try to run the main installer
- (also known as "stage 2") from a series of different media
- including harddrive, cdrom, and network.
-
- Use the source, Luke.
-
-
-
-
- -=-=-- Okay, now, more details --=-=-
-
-
- [ Installing Mandrake Linux ]
-
-Per default, just insert your Mandrake Linux Installation CD into your
-CDROM tray, be sure your system BIOS is configured to boot on your CDROM,
-and that's all.
-
-If you have multiple CDROM drives and the installer can't autodetect in
-which CDROM drive is the disc, it may ask you to choose the correct drive,
-between your CDROM drives.
-
-Also, if you want to install from an SCSI CDROM, the installer should
-detect your SCSI adapter; if it fails you may have to select the right
-driver and/or supply additional parameters.
-
-
- [ Position of the problem ]
-
-The need for alternate installation methods come with more specific
-hardware configuration and/or need for frequent updates of the Installer
-software.
-
-All of these methods will require to use a special boot disk. The method
-is to download it and then to copy it "physically" to a floppy with the
-command:
-
-# dd if=<boot-disk> of=/dev/fd0
-
-Our boot disks are called "cdrom.img", "network.img", etc.
-
-
- [ Installation from CDROM ]
-
-The first situation you may encounter is an old BIOS which does not permit
-you to boot from your CDROM drive.
-
-In that case, you'll need to use the "cdrom.img" image file. The steps are
-the same as with CDROM boot, and everything should be automatic.
-
-
- [ Installation from DISK ]
-
-If you like trying occasionnally our development version, the Cooker, one
-of the easiest way is to grab a local copy of the Distribution on one of
-your local hard drives, and to install from that location.
-
-At present time, you can install from IDE or SCSI drives, from Linux
-(ext2), Windows (vfat) or Reiserfs partition.
-
-In that case, you'll need to use the "hd.img" image file. The dialogs will
-ask you to choose the DISK drive to use to install from, then the
-partition on which you copied the Distribution, then the location
-(directory) in which you copied the Distribution.
-
-
- [ Installation from NETWORK ]
-
-For convenience, you can also install from a NFS volume, from a FTP
-server, or from a HTTP server. NFS installs are maybe the fastest
-and most convenient possible, so if you need to do frequent and/or
-multiple installs, you may like this option.
-
-In that case, you'll need to use the "network.img" image file. If you have
-PCI network card(s), you'll probably have to only setup your network
-options. If not, you'll have to choose the appropriate driver(s) and/or
-optional parameters. Supported network configurations include static IP
-allocation and DHCP automatic configuration.
-
-
- [ Installation from PCMCIA ]
-
-If you want to perform an installation on your laptop that is not based on
-local IDE CDROM or DISK, nor on built-in network card, but on PCMCIA
-extension (probably a network adapter or CDROM drive), you'll need the
-"pcmcia.img" image file.
-
-PCMCIA services should automatically start and be transparent to you.
-Then, you'll follow the instructions according to your preferred
-installation method.
-
-
- [ Monitoring a stage1 session ]
-
-Linux supports virtual consoles. You can switch between them by issueing
-Ctrl+Alt+Fx key, in which 'x' is the number of the console. Here's console
-occupancy during stage1.
-
-(#1) The user-interface of the stage1 is on the first console. In case of
-newt interaction, it's provided with a neat blue and black color scheme,
-and nice widgets. In case of stdio interaction (cdrom and disk installs),
-it's more basic but still usable :-).
-
-(#2) A shell is provided on second console in some cases (you need to
-compile it with -DSPAWN_SHELL and you need to provide a valid shell in the
-initrd) and of course it's not in, in image files of Mandrake Linux
-releases because it's too much diskspace.
-
-(#3) The log is printed out on the third console. This is the location
-where you can find most valuable information, prefixed by a '*'. See
-"log.h" for calls that print things out to the log.
-
-(#4) The kernel messages are printed on the fourth console. There is a
-process forked very early in the init (the program before the stage1)
-which monitors /proc/kmsg for new kernel messages. Also, syslog stuff (the
-logs commited by the programs) should appear on the /dev/log Unix socket,
-this is also printed on this console.
-
-(#5) Former place for the stderr of insmod calls. It's not used anymore.
-
-(#6) Place where a trivial interactive communication with the stage1 is
-set up if the parameter -DSPAWN_INTERACTIVE is compiled in. Basically, you
-can set switches such as "expert" and "rescue" on the fly with this
-feature. It's implemented with a fork and a Unix pipe.
-
-
- [ Rescueing a system ]
-
-Since Mandrake Linux 7.1, we provide a rescue system through each of the
-previously described methods. You don't need a special "rescue.img" file.
-Just hit "F1" at boot time, type in "rescue", and follow the first steps
-of the installation according to the method you chose (choose
-disks/partitions for disk method, network parameters for network method,
-etc). Then, you'll end up with a workable system, very useful to rescue a
-damaged system, or do other basic actions.
diff --git a/mdk-stage1/doc/TECH-INFOS b/mdk-stage1/doc/TECH-INFOS
deleted file mode 100644
index 074b35d31..000000000
--- a/mdk-stage1/doc/TECH-INFOS
+++ /dev/null
@@ -1,91 +0,0 @@
-
-| (*) Automatic install
-\----------------------
-
-This feature is used to replace redhat kickstart. It uses the kernel
-parameter "automatic" with keywords separated with commas and colons, on
-the following genres:
-
- automatic=method:nfs,network:static,ip:192.168.1.24,server:192.168.1.7,directory:/stable/i586
-
- automatic=method:ftp,network:dhcp,server:ftp.ciril.fr,directory:/pub/linux/mandrake-devel/cooker
-
- automatic=method:ftp,network:dhcp,server:companyserver,directory:/mdkinst,user:XXX,pass:XXX
-
- automatic=method:ftp,interface:eth1,network:dhcp,...
-
- automatic=method:ftp,network:adsl,adsluser:XXX,adslpass:XXX,...
-
- automatic=method:cdrom
-
- automatic=method:disk,disk:hdb,partition:hdb7
-
-
-The keywords correspond to each "virtual" question answered automatically,
-either from a list or from a free field.
-
-
-Keywords are:
-
-
-`method' <- (nfs,ftp,http,cdrom,disk)
-
-if nfs/ftp/http:
-
- `network' <- (static,dhcp,adsl)
-
- if multiple interfaces detected:
-
- `interface' <- (list-of-detected-interfaces)
-
- fi
-
- if static:
-
- `ip', `dns', `gateway', `netmask' (free fields)
-
- elsif adsl:
-
- `adsluser', `adslpass' (free field)
-
- fi
-
- if resolving fails:
-
- `hostname', `domain' (free fields)
-
- fi
-
- `server', `directory' (free fields)
-
- if ftp:
-
- `user', `pass' (free fields)
-
- fi
-
-fi
-
-if disk:
-
- `disk' <- (list-of-detected-disks)
-
- `partition' <- (list-of-detected-partitions)
-
- `directory' (free fields)
-
-fi
-
-
-
-You may use shorter versions of keywords (it helps reducing size of
-commandline), please find each keyword short-alias counterpart in file
-../automatic.c under the identifier named "short_aliases".
-
-This gives for example for:
-
- automatic=method:nfs,network:static,ip:192.168.1.24,server:192.168.1.7,directory:/stable/i586
-==>
- automatic=met:nfs,net:static,ip:192.168.1.24,ser:192.168.1.7,dir:/stable/i586
-
-
diff --git a/mdk-stage1/doc/UPDATEMODULES b/mdk-stage1/doc/UPDATEMODULES
deleted file mode 100644
index 89d86d365..000000000
--- a/mdk-stage1/doc/UPDATEMODULES
+++ /dev/null
@@ -1,74 +0,0 @@
-This is the documentation for the "Update Modules" (Update Drivers)
-feature.
-
-This feature aims to propose new modules or replacement modules for the
-install. This is useful when there is a firmware update for a given
-driver, an additional driver needed for something, etc.
-
-
-You must use a floppy disk with e2fs filesystem (NOT vfat/windows
-formatted). Use "mke2fs /dev/fd0" on your own box to format a floppy with
-e2fs filesystem.
-
-This disk may contain a number of kernel modules on the root (e.g. not in
-a subdirectory); some of them may replace existing modules, some of them
-may be added. This disk must contain a special file, named "to_load", on
-the root (not in a subdirectory). This file will contain a series of
-module names, with optional module options; the program will try to load
-all these modules one after another, using file on the floppy if present,
-else using file within standard module repository ("marfile" on the boot
-floppy). It can contain comments, these are strictly defined by the
-presence of a hash (#) character on column 0 of any line.
-
-
-Here's a typical scenario:
-
-
-1. Boot the floppy (or cdrom) with the option "updatemodules"
-
- (you may do that by pressing F1 then entering "linux updatemodules")
-
-
-2. At the very beginning of the User Interface, you are asked to insert
- the Update Modules disk. Insert the Update Modules disk and press
- Enter.
-
---=----=----=----=----=----=----=----=----=--
-Our example disk contains:
-
-[root@obiwan mnt]# ll floppy/
-total 77
-drwxr-xr-x 2 root root 12288 Jul 26 12:02 lost+found/
--rw-r--r-- 1 root root 9051 Jul 26 12:43 msdos.o
--rw-r--r-- 1 root root 13660 Jul 26 12:04 ppa.o
--rw-r--r-- 1 root root 54 Jul 26 12:46 to_load
--rw-r--r-- 1 root root 32108 Jul 26 12:04 uhci.o
--rw-r--r-- 1 root root 6572 Jul 26 12:04 wacom.o
-[root@obiwan mnt]# cat floppy/to_load
-# Update Drivers description file
-3c59x
-# fat is a dep for msdos
-fat
-# updated msdos (handling of 9+4 filenames)
-msdos
-ppa
-# ISA network card needing options
-ne io=0x300 irq=7
-[root@obiwan mnt]#
---=----=----=----=----=----=----=----=----=--
-
-
-3. The program reads the special file "to_load" and processes the files.
-
- a- 3c59x loaded from the marfile on the boot floppy
- b- fat loaded from the marfile on the boot floppy
- c- msdos loaded from the update modules floppy
- d- ppa loaded from the update modules floppy
- e- ne loaded from the marfile on the boot floppy
-
-
-
-!!! Beware !!!, the dependencies are not handled automatically in
-the case of load from the update modules floppy, that's why on
-our example we need to load "fat" from the standard modules
-before "msdos" from the update floppy.
diff --git a/mdk-stage1/doc/WHY-DIETLIBC b/mdk-stage1/doc/WHY-DIETLIBC
deleted file mode 100644
index e7c526b49..000000000
--- a/mdk-stage1/doc/WHY-DIETLIBC
+++ /dev/null
@@ -1,50 +0,0 @@
-(the dietlibc is a replacement for the glibc, which aim is to produce
-smaller statically linked binaries)
-
-
-The use for dietlibc in the stage1 was clear because currently used
-install process on x86 is from a 1.44 Mbytes floppy. On this floppy we
-need to fit the kernel, modules (scsi and network access), and the code to
-do the basic things to load the stage2. The only part on which we could
-progress was the code.
-
-As always, figures demonstrate evidences. Here are the size of the
-binaries used for the cdrom, disk, network and full floppy installs, using
-newt as the UI library:
-
- - with glibc
-
--rwxr-xr-x 1 gc gc 569448 May 15 15:29 stage1-cdrom
--rwxr-xr-x 1 gc gc 572264 May 15 15:29 stage1-disk
--rwxr-xr-x 1 gc gc 624712 May 15 15:30 stage1-network
--rwxr-xr-x 1 gc gc 720360 May 15 15:29 stage1-full
-
- - with dietlibc
-
--rwxr-xr-x 1 gc gc 169332 May 15 14:26 stage1-cdrom
--rwxr-xr-x 1 gc gc 172180 May 15 14:26 stage1-disk
--rwxr-xr-x 1 gc gc 198612 May 15 14:26 stage1-network
--rwxr-xr-x 1 gc gc 251764 May 15 14:26 stage1-full
-
-
-The `stage1-full' binary has code for many things, most notably: data
-decrunching (bzlib), archive extraction (in-house format), module loading
-(insmod from busybox), PCI detection, ide and scsi handling,
-cdrom/disk/loopback mounting, DHCP client negociation (redhat+grub), NFS
-mounting (util-linux), FTP and HTTP transmission (redhat), pcmcia
-initializing (pcmcia-cs), UI interaction (slang/newt); with use of the
-dietlibc, the binary is only 250 kbytes!
-
-
-Due to the modular coding, it is also possible to choose to not use
-slang/newt as the UI, but a stdio-only UI. In that case, the binaries get
-even smaller:
-
--rwxr-xr-x 1 gc gc 104500 May 15 15:46 stage1-cdrom*
--rwxr-xr-x 1 gc gc 107348 May 15 15:46 stage1-disk*
--rwxr-xr-x 1 gc gc 133972 May 15 15:47 stage1-network*
--rwxr-xr-x 1 gc gc 187348 May 15 15:46 stage1-full*
-
-
-
-gc [Tue May 15 15:58:34 2001] \ No newline at end of file
diff --git a/mdk-stage1/doc/documented..frontend.h b/mdk-stage1/doc/documented..frontend.h
deleted file mode 100644
index 10417ef3b..000000000
--- a/mdk-stage1/doc/documented..frontend.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Using high-level UI.
- *
- * These functions are frontend-independant: your program won't know each
- * `frontend' (e.g. each way to grab user input) will be used.
- *
- * Then you may link your binary against any `frontend' that implement all
- * these functions (and possibly necessary libraries).
- */
-
-
-#ifndef _FRONTEND_H_
-#define _FRONTEND_H_
-
-/* this must be called before anything else */
-void init_frontend(void);
-
-/* this must be called before exit of program */
-void finish_frontend(void);
-
-
-void info_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* (blocks program) */
-
-void error_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* (blocks program) */
-
-/* (doesn't block program)
- * (this is not necessarily stackable, e.g. only one wait_message at a time) */
-void wait_message(char *msg, ...) __attribute__ ((format (printf, 1, 2)));
-
-/* call this to finish the wait on wait_message */
-void remove_wait_message(void);
-
-/* monitor progression of something (downloading a file, etc)
- * if size of progression is unknown, use `0' */
-void init_progression(char *msg, int size);
-void update_progression(int current_size);
-void end_progression(void);
-
-enum frontend_return { RETURN_OK, RETURN_BACK, RETURN_ERROR };
-
-/* Yes == RETURN_OK No == RETURN_ERROR Back == RETURN_BACK */
-enum frontend_return ask_yes_no(char *msg);
-
-/* [elems] NULL terminated array of char*
- * [choice] address of a (unitialized) char* */
-enum frontend_return ask_from_list(char *msg, char ** elems, char ** choice);
-
-enum frontend_return ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice);
-
-/* [questions] NULL terminated array of char*
- * [answers] address of a (unitialized) char**, will contain a non-NULL terminated array of char*
- * [callback_func] function called at most when the answers change; it can examine the array of char* and assign some new char* */
-enum frontend_return ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings));
-
-#endif
diff --git a/mdk-stage1/frontend-common.c b/mdk-stage1/frontend-common.c
deleted file mode 100644
index caddeb7d4..000000000
--- a/mdk-stage1/frontend-common.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include "frontend.h"
-
-
-void info_message(char *msg, ...)
-{
- va_list args;
- va_start(args, msg);
- vinfo_message(msg, args);
- va_end(args);
-}
-
-void wait_message(char *msg, ...)
-{
- va_list args;
- va_start(args, msg);
- vwait_message(msg, args);
- va_end(args);
-}
-
-void error_message(char *msg, ...)
-{
- va_list args;
- va_start(args, msg);
- verror_message(msg, args);
- va_end(args);
-}
diff --git a/mdk-stage1/frontend.h b/mdk-stage1/frontend.h
deleted file mode 100644
index 9c2609281..000000000
--- a/mdk-stage1/frontend.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * For doc please read doc/documented..frontend.h
- */
-
-#ifndef _FRONTEND_H_
-#define _FRONTEND_H_
-
-#include <stdarg.h>
-
-
-enum return_type { RETURN_OK, RETURN_BACK, RETURN_ERROR };
-
-void init_frontend(char * welcome_msg);
-void finish_frontend(void);
-
-void error_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* blocking */
-void info_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* blocking */
-void wait_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* non-blocking */
-void remove_wait_message(void);
-
-void init_progression(char *msg, int size);
-void update_progression(int current_size);
-void end_progression(void);
-
-enum return_type ask_yes_no(char *msg);
-enum return_type ask_from_list(char *msg, char ** elems, char ** choice);
-enum return_type ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice);
-enum return_type ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings));
-
-void suspend_to_console(void);
-void resume_from_suspend(void);
-
-void verror_message(char *msg, va_list ap);
-void vinfo_message(char *msg, va_list ap);
-void vwait_message(char *msg, va_list ap);
-
-
-#endif
diff --git a/mdk-stage1/init-data/emptyboot.img.bz2 b/mdk-stage1/init-data/emptyboot.img.bz2
deleted file mode 100644
index 6ae939c1b..000000000
--- a/mdk-stage1/init-data/emptyboot.img.bz2
+++ /dev/null
Binary files differ
diff --git a/mdk-stage1/init-data/msgboot-blank.img.bz2 b/mdk-stage1/init-data/msgboot-blank.img.bz2
deleted file mode 100644
index a572093d9..000000000
--- a/mdk-stage1/init-data/msgboot-blank.img.bz2
+++ /dev/null
Binary files differ
diff --git a/mdk-stage1/init-data/msgboot-graphicallogo-2880.img.bz2 b/mdk-stage1/init-data/msgboot-graphicallogo-2880.img.bz2
deleted file mode 100644
index 9d5d276fb..000000000
--- a/mdk-stage1/init-data/msgboot-graphicallogo-2880.img.bz2
+++ /dev/null
Binary files differ
diff --git a/mdk-stage1/init-data/msgboot-graphicallogo.img.bz2 b/mdk-stage1/init-data/msgboot-graphicallogo.img.bz2
deleted file mode 100644
index cbbdb8cc7..000000000
--- a/mdk-stage1/init-data/msgboot-graphicallogo.img.bz2
+++ /dev/null
Binary files differ
diff --git a/mdk-stage1/init-data/msgboot.img.bz2 b/mdk-stage1/init-data/msgboot.img.bz2
deleted file mode 100644
index e06018f11..000000000
--- a/mdk-stage1/init-data/msgboot.img.bz2
+++ /dev/null
Binary files differ
diff --git a/mdk-stage1/init-libc-headers.h b/mdk-stage1/init-libc-headers.h
deleted file mode 100644
index 01761e869..000000000
--- a/mdk-stage1/init-libc-headers.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <sys/mount.h>
-#include <linux/un.h>
-#include <errno.h>
-#include <signal.h>
-#include <sys/resource.h>
-#include <sys/wait.h>
-#include <linux/unistd.h>
-#include <sys/select.h>
-
-#ifndef SOCK_STREAM
-#define SOCK_STREAM 1
-#endif
-
-static inline _syscall3(int, syslog, int, type, char *, bufp, int, len);
-static inline _syscall3(int, reboot, int, magic, int, magic2, int, flag);
diff --git a/mdk-stage1/init.c b/mdk-stage1/init.c
deleted file mode 100644
index dc4239ac3..000000000
--- a/mdk-stage1/init.c
+++ /dev/null
@@ -1,468 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#ifndef INIT_HEADERS
-#include "init-libc-headers.h"
-#else
-#include INIT_HEADERS
-#endif
-
-#include "config-stage1.h"
-
-#if defined(__powerpc__)
-#define TIOCSCTTY 0x540
-#endif
-
-char * env[] = {
- "PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sbin:/mnt/usr/sbin:/mnt/bin:/mnt/usr/bin",
- "LD_LIBRARY_PATH=/lib:/usr/lib:/mnt/lib:/mnt/usr/lib:/usr/X11R6/lib:/mnt/usr/X11R6/lib",
- "HOME=/",
- "TERM=linux",
- "TERMINFO=/etc/terminfo",
- NULL
-};
-
-
-/*
- * this needs to handle the following cases:
- *
- * 1) run from a CD root filesystem
- * 2) run from a read only nfs rooted filesystem
- * 3) run from a floppy
- * 4) run from a floppy that's been loaded into a ramdisk
- *
- */
-
-int testing;
-int klog_pid;
-
-
-void fatal_error(char *msg)
-{
- printf("FATAL ERROR IN INIT: %s\n\nI can't recover from this, please reboot manually and send bugreport.\n", msg);
- while (1);
-}
-
-void print_error(char *msg)
-{
- printf("E: %s\n", msg);
-}
-
-void print_warning(char *msg)
-{
- printf("W: %s\n", msg);
-}
-
-void print_int_init(int fd, int i)
-{
- char buf[10];
- char * chptr = buf + 9;
- int j = 0;
-
- if (i < 0)
- {
- write(1, "-", 1);
- i = -1 * i;
- }
-
- while (i)
- {
- *chptr-- = '0' + (i % 10);
- j++;
- i = i / 10;
- }
-
- write(fd, chptr + 1, j);
-}
-
-void print_str_init(int fd, char * string)
-{
- write(fd, string, strlen(string));
-}
-
-
-/* fork to:
- * (1) watch /proc/kmsg and copy the stuff to /dev/tty4
- * (2) listens to /dev/log and copy also this stuff (log from programs)
- */
-void doklog()
-{
- fd_set readset, unixs;
- int in, out, i;
- int log;
- int s;
- int sock = -1;
- struct sockaddr_un sockaddr;
- char buf[1024];
- int readfd;
-
- /* open kernel message logger */
- in = open("/proc/kmsg", O_RDONLY,0);
- if (in < 0) {
- print_error("could not open /proc/kmsg");
- return;
- }
-
- if ((log = open("/tmp/syslog", O_WRONLY | O_CREAT, 0644)) < 0) {
- print_error("error opening /tmp/syslog");
- sleep(5);
- return;
- }
-
- if ((klog_pid = fork())) {
- close(in);
- close(log);
- return;
- } else {
- close(0);
- close(1);
- close(2);
- }
-
- out = open("/dev/tty4", O_WRONLY, 0);
- if (out < 0)
- print_warning("couldn't open tty for syslog -- still using /tmp/syslog\n");
-
- /* now open the syslog socket */
-// ############# LINUX 2.4 /dev/log IS BUGGED! --> apparently the syslogs can't reach me, and it's full up after a while
-// sockaddr.sun_family = AF_UNIX;
-// strncpy(sockaddr.sun_path, "/dev/log", UNIX_PATH_MAX);
-// sock = socket(AF_UNIX, SOCK_STREAM, 0);
-// if (sock < 0) {
-// printf("error creating socket: %d\n", errno);
-// sleep(5);
-// }
-//
-// print_str_init(log, "] got socket\n");
-// if (bind(sock, (struct sockaddr *) &sockaddr, sizeof(sockaddr.sun_family) + strlen(sockaddr.sun_path))) {
-// print_str_init(log, "] bind error: ");
-// print_int_init(log, errno);
-// print_str_init(log, "\n");
-// sleep(// }
-//
-// print_str_init(log, "] bound socket\n");
-// chmod("/dev/log", 0666);
-// if (listen(sock, 5)) {
-// print_str_init(log, "] listen error: ");
-// print_int_init(log, errno);
-// print_str_init(log, "\n");
-// sleep(5);
-// }
-
- /* disable on-console syslog output */
- syslog(8, NULL, 1);
-
- print_str_init(log, "] kernel/system logger ok\n");
- FD_ZERO(&unixs);
- while (1) {
- memcpy(&readset, &unixs, sizeof(unixs));
-
- if (sock >= 0)
- FD_SET(sock, &readset);
- FD_SET(in, &readset);
-
- i = select(20, &readset, NULL, NULL, NULL);
- if (i <= 0)
- continue;
-
- /* has /proc/kmsg things to tell us? */
- if (FD_ISSET(in, &readset)) {
- i = read(in, buf, sizeof(buf));
- if (i > 0) {
- if (out >= 0)
- write(out, buf, i);
- write(log, buf, i);
- }
- }
-
- /* examine some fd's in the hope to find some syslog outputs from programs */
- for (readfd = 0; readfd < 20; ++readfd) {
- if (FD_ISSET(readfd, &readset) && FD_ISSET(readfd, &unixs)) {
- i = read(readfd, buf, sizeof(buf));
- if (i > 0) {
- /* grep out the output of RPM telling that it installed/removed some packages */
- if (!strstr(buf, "mdk installed") && !strstr(buf, "mdk removed")) {
- if (out >= 0)
- write(out, buf, i);
- write(log, buf, i);
- }
- } else if (i == 0) {
- /* socket closed */
- close(readfd);
- FD_CLR(readfd, &unixs);
- }
- }
- }
-
- /* the socket has moved, new stuff to do */
- if (sock >= 0 && FD_ISSET(sock, &readset)) {
- s = sizeof(sockaddr);
- readfd = accept(sock, (struct sockaddr *) &sockaddr, &s);
- if (readfd < 0) {
- char * msg_error = "] error in accept\n";
- if (out >= 0)
- write(out, msg_error, strlen(msg_error));
- write(log, msg_error, strlen(msg_error));
- close(sock);
- sock = -1;
- }
- else
- FD_SET(readfd, &unixs);
- }
- }
-}
-
-
-#define LOOP_CLR_FD 0x4C01
-
-void del_loop(char *device)
-{
- int fd;
- if ((fd = open(device, O_RDONLY, 0)) < 0) {
- printf("del_loop open failed\n");
- return;
- }
-
- if (ioctl(fd, LOOP_CLR_FD, 0) < 0) {
- printf("del_loop ioctl failed");
- return;
- }
-
- close(fd);
-}
-
-struct filesystem
-{
- char * dev;
- char * name;
- char * fs;
- int mounted;
-};
-
-/* attempt to unmount all filesystems in /proc/mounts */
-void unmount_filesystems(void)
-{
- int fd, size;
- char buf[65535]; /* this should be big enough */
- char *p;
- struct filesystem fs[500];
- int numfs = 0;
- int i, nb;
-
- printf("unmounting filesystems...\n");
-
- fd = open("/proc/mounts", O_RDONLY, 0);
- if (fd < 1) {
- print_error("failed to open /proc/mounts");
- sleep(2);
- return;
- }
-
- size = read(fd, buf, sizeof(buf) - 1);
- buf[size] = '\0';
-
- close(fd);
-
- p = buf;
- while (*p) {
- fs[numfs].mounted = 1;
- fs[numfs].dev = p;
- while (*p != ' ') p++;
- *p++ = '\0';
- fs[numfs].name = p;
- while (*p != ' ') p++;
- *p++ = '\0';
- fs[numfs].fs = p;
- while (*p != ' ') p++;
- *p++ = '\0';
- while (*p != '\n') p++;
- p++;
- if (strcmp(fs[numfs].name, "/") != 0) numfs++; /* skip if root, no need to take initrd root in account */
- }
-
- /* Pixel's ultra-optimized sorting algorithm:
- multiple passes trying to umount everything until nothing moves
- anymore (a.k.a holy shotgun method) */
- do {
- nb = 0;
- for (i = 0; i < numfs; i++) {
- /*printf("trying with %s\n", fs[i].name);*/
- if (fs[i].mounted && umount(fs[i].name) == 0) {
- if (strncmp(fs[i].dev + sizeof("/dev/") - 1, "loop",
- sizeof("loop") - 1) == 0)
- del_loop(fs[i].dev);
-
- printf("\t%s\n", fs[i].name);
- fs[i].mounted = 0;
- nb++;
- }
- }
- } while (nb);
-
- for (i = nb = 0; i < numfs; i++)
- if (fs[i].mounted) {
- printf("\t%s umount failed\n", fs[i].name);
- if (strcmp(fs[i].fs, "ext2") == 0) nb++; /* don't count not-ext2 umount failed */
- }
-
- if (nb) {
- printf("failed to umount some filesystems\n");
- while (1);
- }
-}
-
-int exit_value_rescue = 66;
-
-int main(int argc __attribute__ ((unused)), char **argv __attribute__ ((unused)))
-{
- pid_t installpid, childpid;
- int wait_status;
- int fd;
- int abnormal_termination = 0;
- int end_stage2 = 0;
-
- /* getpid() != 1 should work, by linuxrc tends to get a larger pid */
- testing = (getpid() > 50);
-
- if (!testing) {
- /* turn off screen blanking */
- printf("\033[9;0]");
- printf("\033[8]");
- }
- else
- printf("*** TESTING MODE ***\n");
-
-
- printf("\n\t\t\t\033[1;40mWelcome to \033[1;36mMandrake\033[0;39m Linux\n\n");
-
- if (!testing) {
- if (mount("/proc", "/proc", "proc", 0, NULL))
- fatal_error("Unable to mount proc filesystem");
- }
-
-
- /* ignore Control-C and keyboard stop signals */
- signal(SIGINT, SIG_IGN);
- signal(SIGTSTP, SIG_IGN);
-
-
- if (!testing) {
- fd = open("/dev/tty1", O_RDWR, 0);
- if (fd < 0)
- /* try with devfs */
- fd = open("/dev/vc/1", O_RDWR, 0);
-
- if (fd < 0)
- fatal_error("failed to open /dev/tty1 and /dev/vc/1");
-
- dup2(fd, 0);
- dup2(fd, 1);
- dup2(fd, 2);
- close(fd);
- }
-
-
- /* I set me up as session leader (probably not necessary?) */
- setsid();
- if (ioctl(0, TIOCSCTTY, NULL))
- print_error("could not set new controlling tty");
-
- if (!testing) {
- char my_hostname[] = "localhost.localdomain";
- sethostname(my_hostname, sizeof(my_hostname));
- /* the default domainname (as of 2.0.35) is "(none)", which confuses
- glibc */
- setdomainname("", 0);
- }
-
- if (!testing)
- doklog();
-
- /* Go into normal init mode - keep going, and then do a orderly shutdown
- when:
-
- 1) install exits
- 2) we receive a SIGHUP
- */
-
- printf("If more people were to meet doing raklets, this planet\n");
- printf("would be a safer place.\n");
- printf("\n");
- printf("Running install...\n");
-
- if (!(installpid = fork())) {
- /* child */
- char * child_argv[2];
- child_argv[0] = "/sbin/stage1";
- child_argv[1] = NULL;
-
- execve(child_argv[0], child_argv, env);
- printf("error in exec of stage1 :-(\n");
- return 0;
- }
-
- while (!end_stage2) {
- childpid = wait4(-1, &wait_status, 0, NULL);
- if (childpid == installpid)
- end_stage2 = 1;
- }
-
- if (!WIFEXITED(wait_status) || (WEXITSTATUS(wait_status) != 0 && WEXITSTATUS(wait_status) != exit_value_rescue)) {
- printf("install exited abnormally :-( ");
- if (WIFSIGNALED(wait_status))
- printf("-- received signal %d", WTERMSIG(wait_status));
- printf("\n");
- abnormal_termination = 1;
- } else if (WIFEXITED(wait_status) && WEXITSTATUS(wait_status) == exit_value_rescue) {
- kill(klog_pid, 9);
- printf("exiting init -- giving hand to rescue\n");
- return 0;
- } else
- printf("install succeeded\n");
-
- if (testing)
- return 0;
-
- sync(); sync();
-
- printf("sending termination signals...");
- kill(-1, 15);
- sleep(2);
- printf("done\n");
-
- printf("sending kill signals...");
- kill(-1, 9);
- sleep(2);
- printf("done\n");
-
- unmount_filesystems();
-
- if (!abnormal_termination) {
- printf("rebooting system\n");
- sleep(2);
- reboot(0xfee1dead, 672274793, 0x01234567);
- } else {
- printf("you may safely reboot your system\n");
- while (1);
- }
-
- return 0;
-}
diff --git a/mdk-stage1/insmod-busybox/.cvsignore b/mdk-stage1/insmod-busybox/.cvsignore
deleted file mode 100644
index 26a2c08c9..000000000
--- a/mdk-stage1/insmod-busybox/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-insmod
-insmod-DIET
diff --git a/mdk-stage1/insmod-busybox/Config.h b/mdk-stage1/insmod-busybox/Config.h
deleted file mode 100644
index 8388416b7..000000000
--- a/mdk-stage1/insmod-busybox/Config.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* vi: set sw=4 ts=4: */
-// This file defines the feature set to be compiled into busybox.
-// When you turn things off here, they won't be compiled in at all.
-//
-//// This file is parsed by sed. You MUST use single line comments.
-// i.e. //#define BB_BLAH
-//
-//
-// BusyBox Applications
-#define BB_INSMOD
-// End of Applications List
-//
-//
-//
-// ---------------------------------------------------------
-// This is where feature definitions go. Generally speaking,
-// turning this stuff off makes things a bit smaller (and less
-// pretty/useful).
-//
-//
-//
-// Turn this on to use Erik's very cool devps, and devmtab kernel drivers,
-// thereby eliminating the need for the /proc filesystem and thereby saving
-// lots and lots memory for more important things. You can not use this and
-// USE_PROCFS at the same time... NOTE: If you enable this feature, you
-// _must_ have patched the kernel to include the devps patch that is included
-// in the busybox/kernel-patches directory. You will also need to create some
-// device special files in /dev on your embedded system:
-// mknod /dev/mtab c 10 22
-// mknod /dev/ps c 10 21
-// I emailed Linus and this patch will not be going into the stock kernel.
-//#define BB_FEATURE_USE_DEVPS_PATCH
-//
-// enable features that use the /proc filesystem (apps that
-// break without this will tell you on compile)...
-// You can't use this and BB_FEATURE_USE_DEVPS_PATCH
-// at the same time...
-#define BB_FEATURE_USE_PROCFS
-
-//
-// Enable tab completion in the shell (not yet
-// working very well -- so don't turn this on)
-//#define BB_FEATURE_SH_TAB_COMPLETION
-//
-//Turn on extra fbset options
-//#define BB_FEATURE_FBSET_FANCY
-//
-//Turn on fbset readmode support
-//#define BB_FEATURE_FBSET_READMODE
-//
-// You must enable one or both of these features
-// Support installing modules from pre 2.1 kernels
-//#define BB_FEATURE_INSMOD_OLD_KERNEL
-// Support installing modules from kernel versions after 2.1.18
-#define BB_FEATURE_INSMOD_NEW_KERNEL
-//
-// Support module version checking
-//#define BB_FEATURE_INSMOD_VERSION_CHECKING
-//
-// Support for Minix filesystem, version 2
-//#define BB_FEATURE_MINIX2
-//
-//
-// Enable busybox --install [-s]
-// to create links (or symlinks) for all the commands that are
-// compiled into the binary. (needs /proc filesystem)
-// #define BB_FEATURE_INSTALLER
-//
-// Clean up all memory before exiting -- usually not needed
-// as the OS can clean up... Don't enable this unless you
-// have a really good reason for cleaning things up manually.
-//#define BB_FEATURE_CLEAN_UP
-//
-// End of Features List
-//
-//
-//
-//
-//
-//
-//---------------------------------------------------
-// Nothing beyond this point should ever be touched by
-// mere mortals so leave this stuff alone.
-//
-#ifdef BB_FEATURE_MOUNT_MTAB_SUPPORT
-#define BB_MTAB
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING && defined BB_SH
-#define BB_CMDEDIT
-#endif
-//
-#ifdef BB_KILLALL
-#ifndef BB_KILL
-#define BB_KILL
-#endif
-#endif
-//
-#ifdef BB_FEATURE_LINUXRC
-#ifndef BB_INIT
-#define BB_INIT
-#endif
-#define BB_LINUXRC
-#endif
-//
-#ifdef BB_GZIP
-#ifndef BB_GUNZIP
-#define BB_GUNZIP
-#endif
-#endif
-//
-#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT
-#define BB_NFSMOUNT
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_FEATURE_AUTOWIDTH
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_INSMOD
-#ifndef BB_FEATURE_INSMOD_OLD_KERNEL
-#define BB_FEATURE_INSMOD_NEW_KERNEL
-#endif
-#endif
diff --git a/mdk-stage1/insmod-busybox/Makefile b/mdk-stage1/insmod-busybox/Makefile
deleted file mode 100644
index c8649ae0d..000000000
--- a/mdk-stage1/insmod-busybox/Makefile
+++ /dev/null
@@ -1,65 +0,0 @@
- #******************************************************************************
- #
- # insmod from busybox (i386 only)
- #
- # $Id$
- #
- # Copyright (C) 1999,2000 by Lineo, inc.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-all: insmod insmod-DIET libinsmod.a libinsmod-DIET.a
-
-clean:
- rm -f *.o insmod insmod-DIET libinsmod.a libinsmod-DIET.a
-
-
-FLAGS = -c -Wall -Os -fomit-frame-pointer -D_GNU_SOURCE -DBB_VER='"0.47"' -DBB_BT='"2000.12.06-14:02+0000"'
-
-
-insmod: insmod-frontend.o insmod.o utility-standalone.o
- gcc -o $@ $^
- $(STRIPCMD) $@
-
-insmod-DIET: insmod-frontend-DIET.o insmod-DIET.o utility-standalone-DIET.o
- gcc $(DIETLIBC_LDFLAGS_STAGE1) -o $@ $^ $(DIETLIBC_LIBC)
- $(STRIPCMD) $@
-
-
-libinsmod.a: insmod.o utility.o
- ar cru $@ $^
- ranlib $@
-
-libinsmod-DIET.a: insmod-DIET.o utility-DIET.o
- ar cru $@ $^
- ranlib $@
-
-insmod-frontend.o: insmod-frontend.c busybox.h
- gcc $(FLAGS) $(GLIBC_INCLUDES) insmod-frontend.c
-
-insmod-frontend-DIET.o: insmod-frontend.c busybox.h
- gcc $(FLAGS) $(DIETLIBC_INCLUDES) -o $@ insmod-frontend.c
-
-utility.o: utility.c busybox.h
- gcc $(FLAGS) $(GLIBC_INCLUDES) utility.c
-
-utility-DIET.o: utility.c busybox.h
- gcc $(FLAGS) $(DIETLIBC_INCLUDES) -o $@ utility.c
-
-utility-standalone.o: utility.c busybox.h
- gcc $(FLAGS) $(GLIBC_INCLUDES) -o $@ -D_STANDALONE_ utility.c
-
-utility-standalone-DIET.o: utility.c busybox.h
- gcc $(FLAGS) $(DIETLIBC_INCLUDES) -o $@ -D_STANDALONE_ utility.c
-
-insmod.o: insmod.c busybox.h
- gcc $(FLAGS) $(GLIBC_INCLUDES) insmod.c
-
-insmod-DIET.o: insmod.c busybox.h
- gcc $(FLAGS) $(DIETLIBC_INCLUDES) -o $@ insmod.c
-
diff --git a/mdk-stage1/insmod-busybox/README b/mdk-stage1/insmod-busybox/README
deleted file mode 100644
index 06695074a..000000000
--- a/mdk-stage1/insmod-busybox/README
+++ /dev/null
@@ -1,8 +0,0 @@
-This insmod code comes from busybox-0.47
-
-ftp://ftp.lineo.com/pub/busybox
-
-It is cool but works only for ix86 architecture.
-
-
-gc
diff --git a/mdk-stage1/insmod-busybox/busybox.h b/mdk-stage1/insmod-busybox/busybox.h
deleted file mode 100644
index a2d620c8b..000000000
--- a/mdk-stage1/insmod-busybox/busybox.h
+++ /dev/null
@@ -1,467 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Busybox main internal header file
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Based in part on code from sash, Copyright (c) 1999 by David I. Bell
- * Permission has been granted to redistribute this code under the GPL.
- *
- */
-#ifndef _BB_INTERNAL_H_
-#define _BB_INTERNAL_H_ 1
-
-#include "Config.h"
-
-#ifdef DMALLOC
-#include "dmalloc.h"
-#endif
-
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/param.h>
-/* for the _syscall() macros */
-#include <sys/syscall.h>
-#include <linux/unistd.h>
-#include <linux/kernel.h>
-
-/* Some useful definitions */
-#define FALSE ((int) 1)
-#define TRUE ((int) 0)
-
-/* for mtab.c */
-#define MTAB_GETMOUNTPT '1'
-#define MTAB_GETDEVICE '2'
-
-#define BUF_SIZE 8192
-#define EXPAND_ALLOC 1024
-
-
-#define isBlank(ch) (((ch) == ' ') || ((ch) == '\t'))
-#define isDecimal(ch) (((ch) >= '0') && ((ch) <= '9'))
-#define isOctal(ch) (((ch) >= '0') && ((ch) <= '7'))
-#define isWildCard(ch) (((ch) == '*') || ((ch) == '?') || ((ch) == '['))
-
-/* Macros for min/max. */
-#ifndef MIN
-#define MIN(a,b) (((a)<(b))?(a):(b))
-#endif
-
-#ifndef MAX
-#define MAX(a,b) (((a)>(b))?(a):(b))
-#endif
-
-
-/* I don't like nested includes, but the string and io functions are used
- * too often
- */
-#include <stdio.h>
-#if !defined(NO_STRING_H) || defined(STDC_HEADERS)
-# include <string.h>
-# if !defined(STDC_HEADERS) && !defined(NO_MEMORY_H) && !defined(__GNUC__)
-# include <memory.h>
-# endif
-# define memzero(s, n) memset ((void *)(s), 0, (n))
-#else
-# include <strings.h>
-# define strchr index
-# define strrchr rindex
-# define memcpy(d, s, n) bcopy((s), (d), (n))
-# define memcmp(s1, s2, n) bcmp((s1), (s2), (n))
-# define memzero(s, n) bzero((s), (n))
-#endif
-
-
-enum Location {
- _BB_DIR_ROOT = 0,
- _BB_DIR_BIN,
- _BB_DIR_SBIN,
- _BB_DIR_USR_BIN,
- _BB_DIR_USR_SBIN
-};
-
-struct BB_applet {
- const char* name;
- int (*main)(int argc, char** argv);
- enum Location location;
- const char* usage;
-};
-/* From busybox.c */
-extern const struct BB_applet applets[];
-
-extern int ar_main(int argc, char **argv);
-extern int basename_main(int argc, char **argv);
-extern int bogomips_main(int argc, char **argv);
-extern int busybox_main(int argc, char** argv);
-extern int cat_main(int argc, char** argv);
-extern int chmod_chown_chgrp_main(int argc, char** argv);
-extern int chroot_main(int argc, char** argv);
-extern int chvt_main(int argc, char** argv);
-extern int clear_main(int argc, char** argv);
-extern int cp_mv_main(int argc, char** argv);
-extern int cut_main(int argc, char** argv);
-extern int date_main(int argc, char** argv);
-extern int dc_main(int argc, char** argv);
-extern int dd_main(int argc, char** argv);
-extern int dirname_main(int argc, char** argv);
-extern int deallocvt_main(int argc, char** argv);
-extern int df_main(int argc, char** argv);
-extern int dmesg_main(int argc, char** argv);
-extern int dos2unix_main(int argc, char** argv);
-extern int du_main(int argc, char** argv);
-extern int dumpkmap_main(int argc, char** argv);
-extern int dutmp_main(int argc, char** argv);
-extern int echo_main(int argc, char** argv);
-extern int expr_main(int argc, char** argv);
-extern int false_main(int argc, char** argv);
-extern int fbset_main(int argc, char** argv);
-extern int fdisk_main(int argc, char** argv);
-extern int fdflush_main(int argc, char **argv);
-extern int fsck_minix_main(int argc, char **argv);
-extern int find_main(int argc, char** argv);
-extern int free_main(int argc, char** argv);
-extern int freeramdisk_main(int argc, char** argv);
-extern int getopt_main(int argc, char** argv);
-extern int grep_main(int argc, char** argv);
-extern int gunzip_main (int argc, char** argv);
-extern int gzip_main(int argc, char** argv);
-extern int halt_main(int argc, char** argv);
-extern int head_main(int argc, char** argv);
-extern int hostid_main(int argc, char** argv);
-extern int hostname_main(int argc, char** argv);
-extern int id_main(int argc, char** argv);
-extern int init_main(int argc, char** argv);
-extern int insmod_main(int argc, char** argv);
-extern int kill_main(int argc, char** argv);
-extern int length_main(int argc, char** argv);
-extern int ln_main(int argc, char** argv);
-extern int loadacm_main(int argc, char** argv);
-extern int loadfont_main(int argc, char** argv);
-extern int loadkmap_main(int argc, char** argv);
-extern int losetup_main(int argc, char** argv);
-extern int logger_main(int argc, char **argv);
-extern int logname_main(int argc, char **argv);
-extern int ls_main(int argc, char** argv);
-extern int lsmod_main(int argc, char** argv);
-extern int makedevs_main(int argc, char** argv);
-extern int md5sum_main(int argc, char** argv);
-extern int mkdir_main(int argc, char** argv);
-extern int mkfifo_main(int argc, char **argv);
-extern int mkfs_minix_main(int argc, char **argv);
-extern int mknod_main(int argc, char** argv);
-extern int mkswap_main(int argc, char** argv);
-extern int mktemp_main(int argc, char **argv);
-extern int nc_main(int argc, char** argv);
-extern int more_main(int argc, char** argv);
-extern int mount_main(int argc, char** argv);
-extern int mt_main(int argc, char** argv);
-extern int nslookup_main(int argc, char **argv);
-extern int ping_main(int argc, char **argv);
-extern int poweroff_main(int argc, char **argv);
-extern int printf_main(int argc, char** argv);
-extern int ps_main(int argc, char** argv);
-extern int pwd_main(int argc, char** argv);
-extern int rdate_main(int argc, char** argv);
-extern int reboot_main(int argc, char** argv);
-extern int renice_main(int argc, char** argv);
-extern int reset_main(int argc, char** argv);
-extern int rm_main(int argc, char** argv);
-extern int rmdir_main(int argc, char **argv);
-extern int rmmod_main(int argc, char** argv);
-extern int sed_main(int argc, char** argv);
-extern int sfdisk_main(int argc, char** argv);
-extern int setkeycodes_main(int argc, char** argv);
-extern int shell_main(int argc, char** argv);
-extern int sleep_main(int argc, char** argv);
-extern int sort_main(int argc, char** argv);
-extern int swap_on_off_main(int argc, char** argv);
-extern int sync_main(int argc, char** argv);
-extern int syslogd_main(int argc, char **argv);
-extern int tail_main(int argc, char** argv);
-extern int tar_main(int argc, char** argv);
-extern int tee_main(int argc, char** argv);
-extern int test_main(int argc, char** argv);
-extern int telnet_main(int argc, char** argv);
-extern int touch_main(int argc, char** argv);
-extern int tr_main(int argc, char** argv);
-extern int true_main(int argc, char** argv);
-extern int tput_main(int argc, char** argv);
-extern int tryopen_main(int argc, char** argv);
-extern int tty_main(int argc, char** argv);
-extern int umount_main(int argc, char** argv);
-extern int uname_main(int argc, char** argv);
-extern int uniq_main(int argc, char** argv);
-extern int unix2dos_main(int argc, char** argv);
-extern int unrpm_main(int argc, char** argv);
-extern int update_main(int argc, char** argv);
-extern int uptime_main(int argc, char** argv);
-extern int usleep_main(int argc, char** argv);
-extern int uuencode_main(int argc, char** argv);
-extern int uudecode_main(int argc, char** argv);
-extern int wc_main(int argc, char** argv);
-extern int wget_main(int argc, char** argv);
-extern int which_main(int argc, char** argv);
-extern int whoami_main(int argc, char** argv);
-extern int xargs_main(int argc, char** argv);
-extern int yes_main(int argc, char** argv);
-
-extern const char ar_usage[];
-extern const char basename_usage[];
-extern const char cat_usage[];
-extern const char chgrp_usage[];
-extern const char chmod_usage[];
-extern const char chown_usage[];
-extern const char chroot_usage[];
-extern const char chvt_usage[];
-extern const char clear_usage[];
-extern const char cp_usage[];
-extern const char cut_usage[];
-extern const char date_usage[];
-extern const char dc_usage[];
-extern const char dd_usage[];
-extern const char deallocvt_usage[];
-extern const char df_usage[];
-extern const char dirname_usage[];
-extern const char dmesg_usage[];
-extern const char dos2unix_usage[];
-extern const char du_usage[];
-extern const char dumpkmap_usage[];
-extern const char dutmp_usage[];
-extern const char echo_usage[];
-extern const char expr_usage[];
-extern const char false_usage[];
-extern const char fdflush_usage[];
-extern const char find_usage[];
-extern const char free_usage[];
-extern const char freeramdisk_usage[];
-extern const char fsck_minix_usage[];
-extern const char grep_usage[];
-extern const char gunzip_usage[];
-extern const char gzip_usage[];
-extern const char halt_usage[];
-extern const char head_usage[];
-extern const char hostid_usage[];
-extern const char hostname_usage[];
-extern const char id_usage[];
-extern const char insmod_usage[];
-extern const char kill_usage[];
-extern const char killall_usage[];
-extern const char length_usage[];
-extern const char ln_usage[];
-extern const char loadacm_usage[];
-extern const char loadfont_usage[];
-extern const char loadkmap_usage[];
-extern const char logger_usage[];
-extern const char logname_usage[];
-extern const char ls_usage[];
-extern const char lsmod_usage[];
-extern const char makedevs_usage[];
-extern const char md5sum_usage[];
-extern const char mkdir_usage[];
-extern const char mkfifo_usage[];
-extern const char mkfs_minix_usage[];
-extern const char mknod_usage[];
-extern const char mkswap_usage[];
-extern const char mktemp_usage[];
-extern const char more_usage[];
-extern const char mount_usage[];
-extern const char mt_usage[];
-extern const char mv_usage[];
-extern const char nc_usage[];
-extern const char nslookup_usage[];
-extern const char ping_usage[];
-extern const char poweroff_usage[];
-extern const char printf_usage[];
-extern const char ps_usage[];
-extern const char pwd_usage[];
-extern const char rdate_usage[];
-extern const char reboot_usage[];
-extern const char renice_usage[];
-extern const char reset_usage[];
-extern const char rm_usage[];
-extern const char rmdir_usage[];
-extern const char rmmod_usage[];
-extern const char sed_usage[];
-extern const char setkeycodes_usage[];
-extern const char shell_usage[];
-extern const char sleep_usage[];
-extern const char sort_usage[];
-extern const char swapoff_usage[];
-extern const char swapon_usage[];
-extern const char sync_usage[];
-extern const char syslogd_usage[];
-extern const char tail_usage[];
-extern const char tar_usage[];
-extern const char tee_usage[];
-extern const char telnet_usage[];
-extern const char test_usage[];
-extern const char touch_usage[];
-extern const char tr_usage[];
-extern const char true_usage[];
-extern const char tty_usage[];
-extern const char umount_usage[];
-extern const char uname_usage[];
-extern const char uniq_usage[];
-extern const char unix2dos_usage[];
-extern const char unrpm_usage[];
-extern const char update_usage[];
-extern const char uptime_usage[];
-extern const char usleep_usage[];
-extern const char uudecode_usage[];
-extern const char uuencode_usage[];
-extern const char wc_usage[];
-extern const char wget_usage[];
-extern const char which_usage[];
-extern const char whoami_usage[];
-extern const char xargs_usage[];
-extern const char yes_usage[];
-
-extern const char *applet_name;
-
-extern void usage(const char *usage) __attribute__ ((noreturn));
-extern void errorMsg(const char *s, ...) __attribute__ ((format (printf, 1, 2)));
-extern void logperror(char *s);
-extern void fatalError(const char *s, ...) __attribute__ ((noreturn, format (printf, 1, 2)));
-
-const char *modeString(int mode);
-const char *timeString(time_t timeVal);
-int isDirectory(const char *name, const int followLinks, struct stat *statBuf);
-int isDevice(const char *name);
-
-typedef struct ino_dev_hash_bucket_struct {
- struct ino_dev_hash_bucket_struct *next;
- ino_t ino;
- dev_t dev;
- char name[1];
-} ino_dev_hashtable_bucket_t;
-int is_in_ino_dev_hashtable(const struct stat *statbuf, char **name);
-void add_to_ino_dev_hashtable(const struct stat *statbuf, const char *name);
-void reset_ino_dev_hashtable(void);
-
-int copyFile(const char *srcName, const char *destName,
- int setModes, int followLinks, int forceFlag);
-int copySubFile(int srcFd, int dstFd, size_t remaining);
-char *buildName(const char *dirName, const char *fileName);
-int makeString(int argc, const char **argv, char *buf, int bufLen);
-char *getChunk(int size);
-char *chunkstrdup(const char *str);
-void freeChunks(void);
-int fullWrite(int fd, const char *buf, int len);
-int fullRead(int fd, char *buf, int len);
-int recursiveAction(const char *fileName, int recurse, int followLinks, int depthFirst,
- int (*fileAction) (const char *fileName, struct stat* statbuf, void* userData),
- int (*dirAction) (const char *fileName, struct stat* statbuf, void* userData),
- void* userData);
-
-extern int createPath (const char *name, int mode);
-extern int parse_mode( const char* s, mode_t* theMode);
-
-extern int get_kernel_revision(void);
-
-extern int get_console_fd(char* tty_name);
-extern struct mntent *findMountPoint(const char *name, const char *table);
-extern void write_mtab(char* blockDevice, char* directory,
- char* filesystemType, long flags, char* string_flags);
-extern void erase_mtab(const char * name);
-extern void mtab_read(void);
-extern char *mtab_first(void **iter);
-extern char *mtab_next(void **iter);
-extern char *mtab_getinfo(const char *match, const char which);
-extern int check_wildcard_match(const char* text, const char* pattern);
-extern long getNum (const char *cp);
-extern pid_t* findPidByName( char* pidName);
-extern int find_real_root_device_name(char* name);
-extern char *get_line_from_file(FILE *file);
-extern void print_file(FILE *file);
-extern int print_file_by_name(char *filename);
-extern char process_escape_sequence(char **ptr);
-extern char *get_last_path_component(char *path);
-// extern void xregcomp(regex_t *preg, const char *regex, int cflags);
-
-#ifndef DMALLOC
-extern void *xmalloc (size_t size);
-extern void *xrealloc(void *old, size_t size);
-extern void *xcalloc(size_t nmemb, size_t size);
-extern char *xstrdup (const char *s);
-#endif
-extern char *xstrndup (const char *s, int n);
-
-
-/* These parse entries in /etc/passwd and /etc/group. This is desirable
- * for BusyBox since we want to avoid using the glibc NSS stuff, which
- * increases target size and is often not needed embedded systems. */
-extern long my_getpwnam(char *name);
-extern long my_getgrnam(char *name);
-extern void my_getpwuid(char *name, long uid);
-extern void my_getgrgid(char *group, long gid);
-extern long my_getpwnamegid(char *name);
-
-extern int device_open(char *device, int mode);
-
-#if defined BB_FEATURE_MOUNT_LOOP
-extern int del_loop(const char *device);
-extern int set_loop(const char *device, const char *file, int offset, int *loopro);
-extern char *find_unused_loop_device (void);
-#endif
-
-
-#if (__GLIBC__ < 2) && (defined BB_SYSLOGD || defined BB_INIT)
-extern int vdprintf(int d, const char *format, va_list ap);
-#endif
-
-#if defined BB_NFSMOUNT
-int nfsmount(const char *spec, const char *node, int *flags,
- char **extra_opts, char **mount_opts, int running_bg);
-#endif
-
-#ifndef RB_POWER_OFF
-/* Stop system and switch power off if possible. */
-#define RB_POWER_OFF 0x4321fedc
-#endif
-
-/* Include our own copy of struct sysinfo to avoid binary compatability
- * problems with Linux 2.4, which changed things. Grumble, grumble. */
-//struct sysinfo {
-// long uptime; /* Seconds since boot */
-// unsigned long loads[3]; /* 1, 5, and 15 minute load averages */
-// unsigned long totalram; /* Total usable main memory size */
-// unsigned long freeram; /* Available memory size */
-// unsigned long sharedram; /* Amount of shared memory */
-// unsigned long bufferram; /* Memory used by buffers */
-// unsigned long totalswap; /* Total swap space size */
-// unsigned long freeswap; /* swap space still available */
-// unsigned short procs; /* Number of current processes */
-// unsigned long totalhigh; /* Total high memory size */
-// unsigned long freehigh; /* Available high memory size */
-// unsigned int mem_unit; /* Memory unit size in bytes */
-// char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */
-//};
-extern int sysinfo (struct sysinfo* info);
-
-/* Bit map related macros -- libc5 doens't provide these... sigh. */
-#ifndef setbit
-#define NBBY CHAR_BIT
-#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
-#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY)))
-#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-#endif
-
-#endif /* _BB_INTERNAL_H_ */
diff --git a/mdk-stage1/insmod-busybox/insmod-frontend.c b/mdk-stage1/insmod-busybox/insmod-frontend.c
deleted file mode 100644
index 3e5d6b3d7..000000000
--- a/mdk-stage1/insmod-busybox/insmod-frontend.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-
-
-int insmod_main( int argc, char **argv);
-
-int main( int argc, char **argv)
-{
- printf("Using insmod provided by busybox.\n");
- return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-busybox/insmod.c b/mdk-stage1/insmod-busybox/insmod.c
deleted file mode 100644
index bdf7ba5f7..000000000
--- a/mdk-stage1/insmod-busybox/insmod.c
+++ /dev/null
@@ -1,2951 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Mini insmod implementation for busybox
- *
- * Copyright (C) 1999,2000 by Lineo, inc.
- * Written by Erik Andersen <andersen@lineo.com>
- * and Ron Alder <alder@lineo.com>
- *
- * Modified by Bryan Rittmeyer <bryan@ixiacom.com> to support SH4
- * and (theoretically) SH3. Note that there is still no true
- * multiple architecture support. You just get SH3|SH4|i386, despite
- * the mention of ARM and m68k--which may or may not work (but
- * almost certainly do not, due to at least MATCH_MACHINE). I have
- * only tested SH4 in little endian mode.
- *
- * Based almost entirely on the Linux modutils-2.3.11 implementation.
- * Copyright 1996, 1997 Linux International.
- * New implementation contributed by Richard Henderson <rth@tamu.edu>
- * Based on original work by Bjorn Ekwall <bj0rn@blox.se>
- * Restructured (and partly rewritten) by:
- * Björn Ekwall <bj0rn@blox.se> February 1999
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include "../insmod.h"
-#include "busybox.h"
-#include <stdlib.h>
-#include <stdio.h>
-#include <stddef.h>
-#include <errno.h>
-#include <unistd.h>
-#include <dirent.h>
-#include <ctype.h>
-#include <assert.h>
-#include <sys/utsname.h>
-
-//----------------------------------------------------------------------------
-//--------modutils module.h, lines 45-242
-//----------------------------------------------------------------------------
-
-/* Definitions for the Linux module syscall interface.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-
-#ifndef MODUTILS_MODULE_H
-#define MODUTILS_MODULE_H 1
-
-#ident "$Id$"
-
-/* This file contains the structures used by the 2.0 and 2.1 kernels.
- We do not use the kernel headers directly because we do not wish
- to be dependant on a particular kernel version to compile insmod. */
-
-
-/*======================================================================*/
-/* The structures used by Linux 2.0. */
-
-/* The symbol format used by get_kernel_syms(2). */
-struct old_kernel_sym
-{
- unsigned long value;
- char name[60];
-};
-
-struct old_module_ref
-{
- unsigned long module; /* kernel addresses */
- unsigned long next;
-};
-
-struct old_module_symbol
-{
- unsigned long addr;
- unsigned long name;
-};
-
-struct old_symbol_table
-{
- int size; /* total, including string table!!! */
- int n_symbols;
- int n_refs;
- struct old_module_symbol symbol[0]; /* actual size defined by n_symbols */
- struct old_module_ref ref[0]; /* actual size defined by n_refs */
-};
-
-struct old_mod_routines
-{
- unsigned long init;
- unsigned long cleanup;
-};
-
-struct old_module
-{
- unsigned long next;
- unsigned long ref; /* the list of modules that refer to me */
- unsigned long symtab;
- unsigned long name;
- int size; /* size of module in pages */
- unsigned long addr; /* address of module */
- int state;
- unsigned long cleanup; /* cleanup routine */
-};
-
-/* Sent to init_module(2) or'ed into the code size parameter. */
-#define OLD_MOD_AUTOCLEAN 0x40000000 /* big enough, but no sign problems... */
-
-int get_kernel_syms(struct old_kernel_sym *);
-int old_sys_init_module(const char *name, char *code, unsigned codesize,
- struct old_mod_routines *, struct old_symbol_table *);
-
-/*======================================================================*/
-/* For sizeof() which are related to the module platform and not to the
- environment isnmod is running in, use sizeof_xx instead of sizeof(xx). */
-
-#define tgt_sizeof_char sizeof(char)
-#define tgt_sizeof_short sizeof(short)
-#define tgt_sizeof_int sizeof(int)
-#define tgt_sizeof_long sizeof(long)
-#define tgt_sizeof_char_p sizeof(char *)
-#define tgt_sizeof_void_p sizeof(void *)
-#define tgt_long long
-
-#if defined(__sparc__) && !defined(__sparc_v9__) && defined(ARCH_sparc64)
-#undef tgt_sizeof_long
-#undef tgt_sizeof_char_p
-#undef tgt_sizeof_void_p
-#undef tgt_long
-#define tgt_sizeof_long 8
-#define tgt_sizeof_char_p 8
-#define tgt_sizeof_void_p 8
-#define tgt_long long long
-#endif
-
-/*======================================================================*/
-/* The structures used in Linux 2.1. */
-
-/* Note: new_module_symbol does not use tgt_long intentionally */
-struct new_module_symbol
-{
- unsigned long value;
- unsigned long name;
-};
-
-struct new_module_persist;
-
-struct new_module_ref
-{
- unsigned tgt_long dep; /* kernel addresses */
- unsigned tgt_long ref;
- unsigned tgt_long next_ref;
-};
-
-struct new_module
-{
- unsigned tgt_long size_of_struct; /* == sizeof(module) */
- unsigned tgt_long next;
- unsigned tgt_long name;
- unsigned tgt_long size;
-
- tgt_long usecount;
- unsigned tgt_long flags; /* AUTOCLEAN et al */
-
- unsigned nsyms;
- unsigned ndeps;
-
- unsigned tgt_long syms;
- unsigned tgt_long deps;
- unsigned tgt_long refs;
- unsigned tgt_long init;
- unsigned tgt_long cleanup;
- unsigned tgt_long ex_table_start;
- unsigned tgt_long ex_table_end;
-#ifdef __alpha__
- unsigned tgt_long gp;
-#endif
- /* Everything after here is extension. */
- unsigned tgt_long persist_start;
- unsigned tgt_long persist_end;
- unsigned tgt_long can_unload;
- unsigned tgt_long runsize;
-};
-
-struct new_module_info
-{
- unsigned long addr;
- unsigned long size;
- unsigned long flags;
- long usecount;
-};
-
-/* Bits of module.flags. */
-#define NEW_MOD_RUNNING 1
-#define NEW_MOD_DELETED 2
-#define NEW_MOD_AUTOCLEAN 4
-#define NEW_MOD_VISITED 8
-#define NEW_MOD_USED_ONCE 16
-
-int new_sys_init_module(const char *name, const struct new_module *);
-int query_module(const char *name, int which, void *buf, size_t bufsize,
- size_t *ret);
-
-/* Values for query_module's which. */
-
-#define QM_MODULES 1
-#define QM_DEPS 2
-#define QM_REFS 3
-#define QM_SYMBOLS 4
-#define QM_INFO 5
-
-/*======================================================================*/
-/* The system calls unchanged between 2.0 and 2.1. */
-
-unsigned long create_module(const char *, size_t);
-int delete_module(const char *);
-
-
-#endif /* module.h */
-
-//----------------------------------------------------------------------------
-//--------end of modutils module.h
-//----------------------------------------------------------------------------
-
-
-
-//----------------------------------------------------------------------------
-//--------modutils obj.h, lines 253-462
-//----------------------------------------------------------------------------
-
-/* Elf object file loading and relocation routines.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-
-#ifndef MODUTILS_OBJ_H
-#define MODUTILS_OBJ_H 1
-
-#ident "$Id$"
-
-/* The relocatable object is manipulated using elfin types. */
-
-#include <stdio.h>
-#include <elf.h>
-
-
-/* Machine-specific elf macros for i386 et al. */
-
-/* the SH changes have only been tested on the SH4 in =little endian= mode */
-/* I'm not sure about big endian, so let's warn: */
-
-#if (defined(__SH4__) || defined(__SH3__)) && defined(__BIG_ENDIAN__)
-#error insmod.c may require changes for use on big endian SH4/SH3
-#endif
-
-/* it may or may not work on the SH1/SH2... So let's error on those
- also */
-#if (defined(__sh__) && (!(defined(__SH3__) || defined(__SH4__))))
-#error insmod.c may require changes for non-SH3/SH4 use
-#endif
-
-#define ELFCLASSM ELFCLASS32
-#define ELFDATAM ELFDATA2LSB
-
-
-
-#if defined(__sh__)
-
-#define MATCH_MACHINE(x) (x == EM_SH)
-#define SHT_RELM SHT_RELA
-#define Elf32_RelM Elf32_Rela
-
-#else
-
-/* presumably we can use these for anything but the SH */
-/* this is the previous behavior, but it does result in
- insmod.c being broken on anything except i386 */
-
-#define MATCH_MACHINE(x) (x == EM_386)
-#define SHT_RELM SHT_REL
-#define Elf32_RelM Elf32_Rel
-
-#endif
-
-#ifndef ElfW
-# if ELFCLASSM == ELFCLASS32
-# define ElfW(x) Elf32_ ## x
-# define ELFW(x) ELF32_ ## x
-# else
-# define ElfW(x) Elf64_ ## x
-# define ELFW(x) ELF64_ ## x
-# endif
-#endif
-
-/* For some reason this is missing from libc5. */
-#ifndef ELF32_ST_INFO
-# define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
-#endif
-
-#ifndef ELF64_ST_INFO
-# define ELF64_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
-#endif
-
-struct obj_string_patch;
-struct obj_symbol_patch;
-
-struct obj_section
-{
- ElfW(Shdr) header;
- const char *name;
- char *contents;
- struct obj_section *load_next;
- int idx;
-};
-
-struct obj_symbol
-{
- struct obj_symbol *next; /* hash table link */
- const char *name;
- unsigned long value;
- unsigned long size;
- int secidx; /* the defining section index/module */
- int info;
- int ksymidx; /* for export to the kernel symtab */
- int referenced; /* actually used in the link */
-};
-
-/* Hardcode the hash table size. We shouldn't be needing so many
- symbols that we begin to degrade performance, and we get a big win
- by giving the compiler a constant divisor. */
-
-#define HASH_BUCKETS 521
-
-struct obj_file
-{
- ElfW(Ehdr) header;
- ElfW(Addr) baseaddr;
- struct obj_section **sections;
- struct obj_section *load_order;
- struct obj_section **load_order_search_start;
- struct obj_string_patch *string_patches;
- struct obj_symbol_patch *symbol_patches;
- int (*symbol_cmp)(const char *, const char *);
- unsigned long (*symbol_hash)(const char *);
- unsigned long local_symtab_size;
- struct obj_symbol **local_symtab;
- struct obj_symbol *symtab[HASH_BUCKETS];
-};
-
-enum obj_reloc
-{
- obj_reloc_ok,
- obj_reloc_overflow,
- obj_reloc_dangerous,
- obj_reloc_unhandled
-};
-
-struct obj_string_patch
-{
- struct obj_string_patch *next;
- int reloc_secidx;
- ElfW(Addr) reloc_offset;
- ElfW(Addr) string_offset;
-};
-
-struct obj_symbol_patch
-{
- struct obj_symbol_patch *next;
- int reloc_secidx;
- ElfW(Addr) reloc_offset;
- struct obj_symbol *sym;
-};
-
-
-/* Generic object manipulation routines. */
-
-unsigned long obj_elf_hash(const char *);
-
-unsigned long obj_elf_hash_n(const char *, unsigned long len);
-
-struct obj_symbol *obj_add_symbol (struct obj_file *f, const char *name,
- unsigned long symidx, int info, int secidx,
- ElfW(Addr) value, unsigned long size);
-
-struct obj_symbol *obj_find_symbol (struct obj_file *f,
- const char *name);
-
-ElfW(Addr) obj_symbol_final_value(struct obj_file *f,
- struct obj_symbol *sym);
-
-void obj_set_symbol_compare(struct obj_file *f,
- int (*cmp)(const char *, const char *),
- unsigned long (*hash)(const char *));
-
-struct obj_section *obj_find_section (struct obj_file *f,
- const char *name);
-
-void obj_insert_section_load_order (struct obj_file *f,
- struct obj_section *sec);
-
-struct obj_section *obj_create_alloced_section (struct obj_file *f,
- const char *name,
- unsigned long align,
- unsigned long size);
-
-struct obj_section *obj_create_alloced_section_first (struct obj_file *f,
- const char *name,
- unsigned long align,
- unsigned long size);
-
-void *obj_extend_section (struct obj_section *sec, unsigned long more);
-
-int obj_string_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
- const char *string);
-
-int obj_symbol_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
- struct obj_symbol *sym);
-
-int obj_check_undefineds(struct obj_file *f);
-
-void obj_allocate_commons(struct obj_file *f);
-
-unsigned long obj_load_size (struct obj_file *f);
-
-int obj_relocate (struct obj_file *f, ElfW(Addr) base);
-
-struct obj_file *obj_load(FILE *f);
-
-int obj_create_image (struct obj_file *f, char *image);
-
-/* Architecture specific manipulation routines. */
-
-struct obj_file *arch_new_file (void);
-
-struct obj_section *arch_new_section (void);
-
-struct obj_symbol *arch_new_symbol (void);
-
-enum obj_reloc arch_apply_relocation (struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- ElfW(RelM) *rel, ElfW(Addr) value);
-
-int arch_create_got (struct obj_file *f);
-
-struct new_module;
-int arch_init_module (struct obj_file *f, struct new_module *);
-
-#endif /* obj.h */
-//----------------------------------------------------------------------------
-//--------end of modutils obj.h
-//----------------------------------------------------------------------------
-
-
-
-
-
-#define _PATH_MODULES "/lib/modules"
-#define STRVERSIONLEN 32
-
-#if !defined(BB_FEATURE_INSMOD_NEW_KERNEL) && !defined(BB_FEATURE_INSMOD_OLD_KERNEL)
-#error "Must have ether BB_FEATURE_INSMOD_NEW_KERNEL or BB_FEATURE_INSMOD_OLD_KERNEL defined"
-#endif
-
-/*======================================================================*/
-
-int flag_force_load = 1;
-int flag_autoclean = 0;
-int flag_export = 1;
-
-
-/*======================================================================*/
-
-/* previously, these were named i386_* but since we could be
- compiling for the sh, I've renamed them to the more general
- arch_* These structures are the same between the x86 and SH,
- and we can't support anything else right now anyway. In the
- future maybe they should be #if defined'd */
-
-struct arch_got_entry {
- int offset;
- unsigned offset_done:1;
- unsigned reloc_done:1;
-};
-
-struct arch_file {
- struct obj_file root;
- struct obj_section *got;
-};
-
-struct arch_symbol {
- struct obj_symbol root;
- struct arch_got_entry gotent;
-};
-
-
-struct external_module {
- const char *name;
- ElfW(Addr) addr;
- int used;
- size_t nsyms;
- struct new_module_symbol *syms;
-};
-
-struct new_module_symbol *ksyms;
-size_t nksyms;
-
-struct external_module *ext_modules;
-int n_ext_modules;
-int n_ext_modules_used;
-
-
-
-/* Some firendly syscalls to cheer everyone's day... */
-#define __NR_new_sys_init_module __NR_init_module
-_syscall2(int, new_sys_init_module, const char *, name,
- const struct new_module *, info)
-#define __NR_old_sys_init_module __NR_init_module
-_syscall5(int, old_sys_init_module, const char *, name, char *, code,
- unsigned, codesize, struct old_mod_routines *, routines,
- struct old_symbol_table *, symtab)
-#ifndef BB_RMMOD
-_syscall1(int, delete_module, const char *, name)
-#else
-extern int delete_module(const char *);
-#endif
-
-/* This is kind of troublesome. See, we don't actually support
- the m68k or the arm the same way we support i386 and (now)
- sh. In doing my SH patch, I just assumed that whatever works
- for i386 also works for m68k and arm since currently insmod.c
- does nothing special for them. If this isn't true, the below
- line is rather misleading IMHO, and someone should either
- change it or add more proper architecture-dependent support
- for these boys.
-
- -- Bryan Rittmeyer <bryan@ixiacom.com> */
-
-#if defined(__i386__) || defined(__m68k__) || defined(__arm__)
-/* Jump through hoops to fixup error return codes */
-#define __NR__create_module __NR_create_module
-static inline _syscall2(long, _create_module, const char *, name, size_t,
- size)
-unsigned long create_module(const char *name, size_t size)
-{
- long ret = _create_module(name, size);
-
- if (ret == -1 && errno > 125) {
- ret = -errno;
- errno = 0;
- }
- return ret;
-}
-#else
-_syscall2(unsigned long, create_module, const char *, name, size_t, size)
-#endif
-static char m_filename[BUFSIZ + 1] = "\0";
-static char m_fullName[BUFSIZ + 1] = "\0";
-
-/*======================================================================*/
-
-
-/*======================================================================*/
-
-struct obj_file *arch_new_file(void)
-{
- struct arch_file *f;
- f = xmalloc(sizeof(*f));
- f->got = NULL;
- return &f->root;
-}
-
-struct obj_section *arch_new_section(void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *arch_new_symbol(void)
-{
- struct arch_symbol *sym;
- sym = xmalloc(sizeof(*sym));
- memset(&sym->gotent, 0, sizeof(sym->gotent));
- return &sym->root;
-}
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
-#if defined(__sh__)
- Elf32_Rela * rel, Elf32_Addr v)
-#else
- Elf32_Rel * rel, Elf32_Addr v)
-#endif
-{
- struct arch_file *ifile = (struct arch_file *) f;
- struct arch_symbol *isym = (struct arch_symbol *) sym;
-
- Elf32_Addr *loc = (Elf32_Addr *) (targsec->contents + rel->r_offset);
- Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
- Elf32_Addr got = ifile->got ? ifile->got->header.sh_addr : 0;
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (ELF32_R_TYPE(rel->r_info)) {
-
-/* even though these constants seem to be the same for
- the i386 and the sh, we "#if define" them for clarity
- and in case that ever changes */
-#if defined(__sh__)
- case R_SH_NONE:
-#else
- case R_386_NONE:
-#endif
- break;
-
-#if defined(__sh__)
- case R_SH_DIR32:
-#else
- case R_386_32:
-#endif
- *loc += v;
- break;
-
-#if defined(__sh__)
- case R_SH_REL32:
-#else
- case R_386_PLT32:
- case R_386_PC32:
-#endif
- *loc += v - dot;
- break;
-
-#if defined(__sh__)
- case R_SH_PLT32:
- *loc = v - dot;
- break;
-#endif
-
-
-#if defined(__sh__)
- case R_SH_GLOB_DAT:
- case R_SH_JMP_SLOT:
- *loc = v;
- break;
-#else
- case R_386_GLOB_DAT:
- case R_386_JMP_SLOT:
- *loc = v;
- break;
-#endif
-
-#if defined(__sh__)
- case R_SH_RELATIVE:
- *loc += f->baseaddr + rel->r_addend;
- break;
-#else
- case R_386_RELATIVE:
- *loc += f->baseaddr;
- break;
-#endif
-
-#if defined(__sh__)
- case R_SH_GOTPC:
- assert(got != 0);
- *loc += got - dot + rel->r_addend;;
- break;
-#else
- case R_386_GOTPC:
- assert(got != 0);
- *loc += got - dot;
- break;
-#endif
-
-#if defined(__sh__)
- case R_SH_GOT32:
- assert(isym != NULL);
- if (!isym->gotent.reloc_done) {
- isym->gotent.reloc_done = 1;
- *(Elf32_Addr *) (ifile->got->contents + isym->gotent.offset) =
- v;
- }
- *loc += isym->gotent.offset + rel->r_addend;
- break;
-#else
- case R_386_GOT32:
- assert(isym != NULL);
- if (!isym->gotent.reloc_done) {
- isym->gotent.reloc_done = 1;
- *(Elf32_Addr *) (ifile->got->contents + isym->gotent.offset) =
- v;
- }
- *loc += isym->gotent.offset;
- break;
-#endif
-
-#if defined(__sh__)
- case R_SH_GOTOFF:
-#else
- case R_386_GOTOFF:
-#endif
- assert(got != 0);
- *loc += v - got;
- break;
-
- default:
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int arch_create_got(struct obj_file *f)
-{
- struct arch_file *ifile = (struct arch_file *) f;
- int i, n, offset = 0, gotneeded = 0;
-
- n = ifile->root.header.e_shnum;
- for (i = 0; i < n; ++i) {
- struct obj_section *relsec, *symsec, *strsec;
-#if defined(__sh__)
- Elf32_Rela *rel, *relend;
-#else
- Elf32_Rel *rel, *relend;
-#endif
- Elf32_Sym *symtab;
- const char *strtab;
-
- relsec = ifile->root.sections[i];
- if (relsec->header.sh_type != SHT_REL)
- continue;
-
- symsec = ifile->root.sections[relsec->header.sh_link];
- strsec = ifile->root.sections[symsec->header.sh_link];
-
-
-#if defined(__sh__)
- rel = (Elf32_Rela *) relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rela));
-#else
- rel = (Elf32_Rel *) relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rel));
-#endif
- symtab = (Elf32_Sym *) symsec->contents;
- strtab = (const char *) strsec->contents;
-
- for (; rel < relend; ++rel) {
- Elf32_Sym *extsym;
- struct arch_symbol *intsym;
- const char *name;
-
- switch (ELF32_R_TYPE(rel->r_info)) {
-#if defined(__sh__)
- case R_SH_GOTPC:
- case R_SH_GOTOFF:
-#else
- case R_386_GOTPC:
- case R_386_GOTOFF:
-#endif
- gotneeded = 1;
- default:
- continue;
-
-#if defined(__sh__)
- case R_SH_GOT32:
-#else
- case R_386_GOT32:
-#endif
- break;
- }
-
- extsym = &symtab[ELF32_R_SYM(rel->r_info)];
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym =
- (struct arch_symbol *) obj_find_symbol(&ifile->root, name);
-
- if (!intsym->gotent.offset_done) {
- intsym->gotent.offset_done = 1;
- intsym->gotent.offset = offset;
- offset += 4;
- }
- }
- }
-
- if (offset > 0 || gotneeded)
- ifile->got =
- obj_create_alloced_section(&ifile->root, ".got", 4, offset);
-
- return 1;
-}
-
-int arch_init_module(struct obj_file *f, struct new_module *mod)
-{
- return 1;
-}
-
-
-/*======================================================================*/
-
-/* Standard ELF hash function. */
-inline unsigned long obj_elf_hash_n(const char *name, unsigned long n)
-{
- unsigned long h = 0;
- unsigned long g;
- unsigned char ch;
-
- while (n > 0) {
- ch = *name++;
- h = (h << 4) + ch;
- if ((g = (h & 0xf0000000)) != 0) {
- h ^= g >> 24;
- h &= ~g;
- }
- n--;
- }
- return h;
-}
-
-unsigned long obj_elf_hash(const char *name)
-{
- return obj_elf_hash_n(name, strlen(name));
-}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-/* Get the kernel version in the canonical integer form. */
-
-static int get_kernel_version(char str[STRVERSIONLEN])
-{
- struct utsname uts_info;
- char *p, *q;
- int a, b, c;
-
- if (uname(&uts_info) < 0)
- return -1;
- strncpy(str, uts_info.release, STRVERSIONLEN);
- p = uts_info.release;
-
- a = strtoul(p, &p, 10);
- if (*p != '.')
- return -1;
- b = strtoul(p + 1, &p, 10);
- if (*p != '.')
- return -1;
- c = strtoul(p + 1, &q, 10);
- if (p + 1 == q)
- return -1;
-
- return a << 16 | b << 8 | c;
-}
-
-/* String comparison for non-co-versioned kernel and module. */
-
-static int ncv_strcmp(const char *a, const char *b)
-{
- size_t alen = strlen(a), blen = strlen(b);
-
- if (blen == alen + 10 && b[alen] == '_' && b[alen + 1] == 'R')
- return strncmp(a, b, alen);
- else if (alen == blen + 10 && a[blen] == '_' && a[blen + 1] == 'R')
- return strncmp(a, b, blen);
- else
- return strcmp(a, b);
-}
-
-/* String hashing for non-co-versioned kernel and module. Here
- we are simply forced to drop the crc from the hash. */
-
-static unsigned long ncv_symbol_hash(const char *str)
-{
- size_t len = strlen(str);
- if (len > 10 && str[len - 10] == '_' && str[len - 9] == 'R')
- len -= 10;
- return obj_elf_hash_n(str, len);
-}
-
-void
-obj_set_symbol_compare(struct obj_file *f,
- int (*cmp) (const char *, const char *),
- unsigned long (*hash) (const char *))
-{
- if (cmp)
- f->symbol_cmp = cmp;
- if (hash) {
- struct obj_symbol *tmptab[HASH_BUCKETS], *sym, *next;
- int i;
-
- f->symbol_hash = hash;
-
- memcpy(tmptab, f->symtab, sizeof(tmptab));
- memset(f->symtab, 0, sizeof(f->symtab));
-
- for (i = 0; i < HASH_BUCKETS; ++i)
- for (sym = tmptab[i]; sym; sym = next) {
- unsigned long h = hash(sym->name) % HASH_BUCKETS;
- next = sym->next;
- sym->next = f->symtab[h];
- f->symtab[h] = sym;
- }
- }
-}
-
-#endif /* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-
-struct obj_symbol *obj_add_symbol(struct obj_file *f, const char *name,
- unsigned long symidx, int info,
- int secidx, ElfW(Addr) value,
- unsigned long size)
-{
- struct obj_symbol *sym;
- unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
- int n_type = ELFW(ST_TYPE) (info);
- int n_binding = ELFW(ST_BIND) (info);
-
- for (sym = f->symtab[hash]; sym; sym = sym->next)
- if (f->symbol_cmp(sym->name, name) == 0) {
- int o_secidx = sym->secidx;
- int o_info = sym->info;
- int o_type = ELFW(ST_TYPE) (o_info);
- int o_binding = ELFW(ST_BIND) (o_info);
-
- /* A redefinition! Is it legal? */
-
- if (secidx == SHN_UNDEF)
- return sym;
- else if (o_secidx == SHN_UNDEF)
- goto found;
- else if (n_binding == STB_GLOBAL && o_binding == STB_LOCAL) {
- /* Cope with local and global symbols of the same name
- in the same object file, as might have been created
- by ld -r. The only reason locals are now seen at this
- level at all is so that we can do semi-sensible things
- with parameters. */
-
- struct obj_symbol *nsym, **p;
-
- nsym = arch_new_symbol();
- nsym->next = sym->next;
- nsym->ksymidx = -1;
-
- /* Excise the old (local) symbol from the hash chain. */
- for (p = &f->symtab[hash]; *p != sym; p = &(*p)->next)
- continue;
- *p = sym = nsym;
- goto found;
- } else if (n_binding == STB_LOCAL) {
- /* Another symbol of the same name has already been defined.
- Just add this to the local table. */
- sym = arch_new_symbol();
- sym->next = NULL;
- sym->ksymidx = -1;
- f->local_symtab[symidx] = sym;
- goto found;
- } else if (n_binding == STB_WEAK)
- return sym;
- else if (o_binding == STB_WEAK)
- goto found;
- /* Don't unify COMMON symbols with object types the programmer
- doesn't expect. */
- else if (secidx == SHN_COMMON
- && (o_type == STT_NOTYPE || o_type == STT_OBJECT))
- return sym;
- else if (o_secidx == SHN_COMMON
- && (n_type == STT_NOTYPE || n_type == STT_OBJECT))
- goto found;
- else {
- /* Don't report an error if the symbol is coming from
- the kernel or some external module. */
- if (secidx <= SHN_HIRESERVE)
- errorMsg("%s multiply defined", name);
- return sym;
- }
- }
-
- /* Completely new symbol. */
- sym = arch_new_symbol();
- sym->next = f->symtab[hash];
- f->symtab[hash] = sym;
- sym->ksymidx = -1;
-
- if (ELFW(ST_BIND) (info) == STB_LOCAL)
- f->local_symtab[symidx] = sym;
-
- found:
- sym->name = name;
- sym->value = value;
- sym->size = size;
- sym->secidx = secidx;
- sym->info = info;
-
- return sym;
-}
-
-struct obj_symbol *obj_find_symbol(struct obj_file *f, const char *name)
-{
- struct obj_symbol *sym;
- unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-
- for (sym = f->symtab[hash]; sym; sym = sym->next)
- if (f->symbol_cmp(sym->name, name) == 0)
- return sym;
-
- return NULL;
-}
-
-ElfW(Addr)
- obj_symbol_final_value(struct obj_file * f, struct obj_symbol * sym)
-{
- if (sym) {
- if (sym->secidx >= SHN_LORESERVE)
- return sym->value;
-
- return sym->value + f->sections[sym->secidx]->header.sh_addr;
- } else {
- /* As a special case, a NULL sym has value zero. */
- return 0;
- }
-}
-
-struct obj_section *obj_find_section(struct obj_file *f, const char *name)
-{
- int i, n = f->header.e_shnum;
-
- for (i = 0; i < n; ++i)
- if (strcmp(f->sections[i]->name, name) == 0)
- return f->sections[i];
-
- return NULL;
-}
-
-static int obj_load_order_prio(struct obj_section *a)
-{
- unsigned long af, ac;
-
- af = a->header.sh_flags;
-
- ac = 0;
- if (a->name[0] != '.' || strlen(a->name) != 10 ||
- strcmp(a->name + 5, ".init"))
- ac |= 32;
- if (af & SHF_ALLOC)
- ac |= 16;
- if (!(af & SHF_WRITE))
- ac |= 8;
- if (af & SHF_EXECINSTR)
- ac |= 4;
- if (a->header.sh_type != SHT_NOBITS)
- ac |= 2;
-
- return ac;
-}
-
-void
-obj_insert_section_load_order(struct obj_file *f, struct obj_section *sec)
-{
- struct obj_section **p;
- int prio = obj_load_order_prio(sec);
- for (p = f->load_order_search_start; *p; p = &(*p)->load_next)
- if (obj_load_order_prio(*p) < prio)
- break;
- sec->load_next = *p;
- *p = sec;
-}
-
-struct obj_section *obj_create_alloced_section(struct obj_file *f,
- const char *name,
- unsigned long align,
- unsigned long size)
-{
- int newidx = f->header.e_shnum++;
- struct obj_section *sec;
-
- f->sections = xrealloc(f->sections, (newidx + 1) * sizeof(sec));
- f->sections[newidx] = sec = arch_new_section();
-
- memset(sec, 0, sizeof(*sec));
- sec->header.sh_type = SHT_PROGBITS;
- sec->header.sh_flags = SHF_WRITE | SHF_ALLOC;
- sec->header.sh_size = size;
- sec->header.sh_addralign = align;
- sec->name = name;
- sec->idx = newidx;
- if (size)
- sec->contents = xmalloc(size);
-
- obj_insert_section_load_order(f, sec);
-
- return sec;
-}
-
-struct obj_section *obj_create_alloced_section_first(struct obj_file *f,
- const char *name,
- unsigned long align,
- unsigned long size)
-{
- int newidx = f->header.e_shnum++;
- struct obj_section *sec;
-
- f->sections = xrealloc(f->sections, (newidx + 1) * sizeof(sec));
- f->sections[newidx] = sec = arch_new_section();
-
- memset(sec, 0, sizeof(*sec));
- sec->header.sh_type = SHT_PROGBITS;
- sec->header.sh_flags = SHF_WRITE | SHF_ALLOC;
- sec->header.sh_size = size;
- sec->header.sh_addralign = align;
- sec->name = name;
- sec->idx = newidx;
- if (size)
- sec->contents = xmalloc(size);
-
- sec->load_next = f->load_order;
- f->load_order = sec;
- if (f->load_order_search_start == &f->load_order)
- f->load_order_search_start = &sec->load_next;
-
- return sec;
-}
-
-void *obj_extend_section(struct obj_section *sec, unsigned long more)
-{
- unsigned long oldsize = sec->header.sh_size;
- sec->contents = xrealloc(sec->contents, sec->header.sh_size += more);
- return sec->contents + oldsize;
-}
-
-
-
-/* Conditionally add the symbols from the given symbol set to the
- new module. */
-
-static int
-add_symbols_from(
- struct obj_file *f,
- int idx, struct new_module_symbol *syms, size_t nsyms)
-{
- struct new_module_symbol *s;
- size_t i;
- int used = 0;
-
- for (i = 0, s = syms; i < nsyms; ++i, ++s) {
-
- /* Only add symbols that are already marked external. If we
- override locals we may cause problems for argument initialization.
- We will also create a false dependency on the module. */
- struct obj_symbol *sym;
-
- sym = obj_find_symbol(f, (char *) s->name);
- if (sym && !ELFW(ST_BIND) (sym->info) == STB_LOCAL) {
- sym = obj_add_symbol(f, (char *) s->name, -1,
- ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
- idx, s->value, 0);
- /* Did our symbol just get installed? If so, mark the
- module as "used". */
- if (sym->secidx == idx)
- used = 1;
- }
- }
-
- return used;
-}
-
-static void add_kernel_symbols(struct obj_file *f)
-{
- struct external_module *m;
- int i, nused = 0;
-
- /* Add module symbols first. */
-
- for (i = 0, m = ext_modules; i < n_ext_modules; ++i, ++m)
- if (m->nsyms
- && add_symbols_from(f, SHN_HIRESERVE + 2 + i, m->syms,
- m->nsyms)) m->used = 1, ++nused;
-
- n_ext_modules_used = nused;
-
- /* And finally the symbols from the kernel proper. */
-
- if (nksyms)
- add_symbols_from(f, SHN_HIRESERVE + 1, ksyms, nksyms);
-}
-
-static char *get_modinfo_value(struct obj_file *f, const char *key)
-{
- struct obj_section *sec;
- char *p, *v, *n, *ep;
- size_t klen = strlen(key);
-
- sec = obj_find_section(f, ".modinfo");
- if (sec == NULL)
- return NULL;
- p = sec->contents;
- ep = p + sec->header.sh_size;
- while (p < ep) {
- v = strchr(p, '=');
- n = strchr(p, '\0');
- if (v) {
- if (p + klen == v && strncmp(p, key, klen) == 0)
- return v + 1;
- } else {
- if (p + klen == n && strcmp(p, key) == 0)
- return n;
- }
- p = n + 1;
- }
-
- return NULL;
-}
-
-
-/*======================================================================*/
-/* Functions relating to module loading in pre 2.1 kernels. */
-
-static int
-old_process_module_arguments(struct obj_file *f, int argc, char **argv)
-{
- while (argc > 0) {
- char *p, *q;
- struct obj_symbol *sym;
- int *loc;
-
- p = *argv;
- if ((q = strchr(p, '=')) == NULL) {
- argc--;
- continue;
- }
- *q++ = '\0';
-
- sym = obj_find_symbol(f, p);
-
- /* Also check that the parameter was not resolved from the kernel. */
- if (sym == NULL || sym->secidx > SHN_HIRESERVE) {
- errorMsg("symbol for parameter %s not found", p);
- return 0;
- }
-
- loc = (int *) (f->sections[sym->secidx]->contents + sym->value);
-
- /* Do C quoting if we begin with a ". */
- if (*q == '"') {
- char *r, *str;
-
- str = alloca(strlen(q));
- for (r = str, q++; *q != '"'; ++q, ++r) {
- if (*q == '\0') {
- errorMsg("improperly terminated string argument for %s", p);
- return 0;
- } else if (*q == '\\')
- switch (*++q) {
- case 'a':
- *r = '\a';
- break;
- case 'b':
- *r = '\b';
- break;
- case 'e':
- *r = '\033';
- break;
- case 'f':
- *r = '\f';
- break;
- case 'n':
- *r = '\n';
- break;
- case 'r':
- *r = '\r';
- break;
- case 't':
- *r = '\t';
- break;
-
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- {
- int c = *q - '0';
- if (q[1] >= '0' && q[1] <= '7') {
- c = (c * 8) + *++q - '0';
- if (q[1] >= '0' && q[1] <= '7')
- c = (c * 8) + *++q - '0';
- }
- *r = c;
- }
- break;
-
- default:
- *r = *q;
- break;
- } else
- *r = *q;
- }
- *r = '\0';
- obj_string_patch(f, sym->secidx, sym->value, str);
- } else if (*q >= '0' && *q <= '9') {
- do
- *loc++ = strtoul(q, &q, 0);
- while (*q++ == ',');
- } else {
- char *contents = f->sections[sym->secidx]->contents;
- char *loc = contents + sym->value;
- char *r; /* To search for commas */
-
- /* Break the string with comas */
- while ((r = strchr(q, ',')) != (char *) NULL) {
- *r++ = '\0';
- obj_string_patch(f, sym->secidx, loc - contents, q);
- loc += sizeof(char *);
- q = r;
- }
-
- /* last part */
- obj_string_patch(f, sym->secidx, loc - contents, q);
- }
-
- argc--, argv++;
- }
-
- return 1;
-}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-static int old_is_module_checksummed(struct obj_file *f)
-{
- return obj_find_symbol(f, "Using_Versions") != NULL;
-}
-/* Get the module's kernel version in the canonical integer form. */
-
-static int
-old_get_module_version(struct obj_file *f, char str[STRVERSIONLEN])
-{
- struct obj_symbol *sym;
- char *p, *q;
- int a, b, c;
-
- sym = obj_find_symbol(f, "kernel_version");
- if (sym == NULL)
- return -1;
-
- p = f->sections[sym->secidx]->contents + sym->value;
- strncpy(str, p, STRVERSIONLEN);
-
- a = strtoul(p, &p, 10);
- if (*p != '.')
- return -1;
- b = strtoul(p + 1, &p, 10);
- if (*p != '.')
- return -1;
- c = strtoul(p + 1, &q, 10);
- if (p + 1 == q)
- return -1;
-
- return a << 16 | b << 8 | c;
-}
-
-#endif /* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-#ifdef BB_FEATURE_INSMOD_OLD_KERNEL
-
-/* Fetch all the symbols and divvy them up as appropriate for the modules. */
-
-static int old_get_kernel_symbols(const char *m_name)
-{
- struct old_kernel_sym *ks, *k;
- struct new_module_symbol *s;
- struct external_module *mod;
- int nks, nms, nmod, i;
-
- nks = get_kernel_syms(NULL);
- if (nks < 0) {
- errorMsg("get_kernel_syms: %s: %s", m_name, strerror(errno));
- return 0;
- }
-
- ks = k = xmalloc(nks * sizeof(*ks));
-
- if (get_kernel_syms(ks) != nks) {
- logperror("inconsistency with get_kernel_syms -- is someone else "
- "playing with modules?");
- free(ks);
- return 0;
- }
-
- /* Collect the module information. */
-
- mod = NULL;
- nmod = -1;
-
- while (k->name[0] == '#' && k->name[1]) {
- struct old_kernel_sym *k2;
- struct new_module_symbol *s;
-
- /* Find out how many symbols this module has. */
- for (k2 = k + 1; k2->name[0] != '#'; ++k2)
- continue;
- nms = k2 - k - 1;
-
- mod = xrealloc(mod, (++nmod + 1) * sizeof(*mod));
- mod[nmod].name = k->name + 1;
- mod[nmod].addr = k->value;
- mod[nmod].used = 0;
- mod[nmod].nsyms = nms;
- mod[nmod].syms = s = (nms ? xmalloc(nms * sizeof(*s)) : NULL);
-
- for (i = 0, ++k; i < nms; ++i, ++s, ++k) {
- s->name = (unsigned long) k->name;
- s->value = k->value;
- }
-
- k = k2;
- }
-
- ext_modules = mod;
- n_ext_modules = nmod + 1;
-
- /* Now collect the symbols for the kernel proper. */
-
- if (k->name[0] == '#')
- ++k;
-
- nksyms = nms = nks - (k - ks);
- ksyms = s = (nms ? xmalloc(nms * sizeof(*s)) : NULL);
-
- for (i = 0; i < nms; ++i, ++s, ++k) {
- s->name = (unsigned long) k->name;
- s->value = k->value;
- }
-
- return 1;
-}
-
-/* Return the kernel symbol checksum version, or zero if not used. */
-
-static int old_is_kernel_checksummed(void)
-{
- /* Using_Versions is the first symbol. */
- if (nksyms > 0
- && strcmp((char *) ksyms[0].name,
- "Using_Versions") == 0) return ksyms[0].value;
- else
- return 0;
-}
-
-
-static int old_create_mod_use_count(struct obj_file *f)
-{
- struct obj_section *sec;
-
- sec = obj_create_alloced_section_first(f, ".moduse", sizeof(long),
- sizeof(long));
-
- obj_add_symbol(f, "mod_use_count_", -1,
- ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT), sec->idx, 0,
- sizeof(long));
-
- return 1;
-}
-
-static int
-old_init_module(const char *m_name, struct obj_file *f,
- unsigned long m_size)
-{
- char *image;
- struct old_mod_routines routines;
- struct old_symbol_table *symtab;
- int ret;
-
- /* Create the symbol table */
- {
- int nsyms = 0, strsize = 0, total;
-
- /* Size things first... */
- if (flag_export) {
- int i;
- for (i = 0; i < HASH_BUCKETS; ++i) {
- struct obj_symbol *sym;
- for (sym = f->symtab[i]; sym; sym = sym->next)
- if (ELFW(ST_BIND) (sym->info) != STB_LOCAL
- && sym->secidx <= SHN_HIRESERVE)
- {
- sym->ksymidx = nsyms++;
- strsize += strlen(sym->name) + 1;
- }
- }
- }
-
- total = (sizeof(struct old_symbol_table)
- + nsyms * sizeof(struct old_module_symbol)
- + n_ext_modules_used * sizeof(struct old_module_ref)
- + strsize);
- symtab = xmalloc(total);
- symtab->size = total;
- symtab->n_symbols = nsyms;
- symtab->n_refs = n_ext_modules_used;
-
- if (flag_export && nsyms) {
- struct old_module_symbol *ksym;
- char *str;
- int i;
-
- ksym = symtab->symbol;
- str = ((char *) ksym + nsyms * sizeof(struct old_module_symbol)
- + n_ext_modules_used * sizeof(struct old_module_ref));
-
- for (i = 0; i < HASH_BUCKETS; ++i) {
- struct obj_symbol *sym;
- for (sym = f->symtab[i]; sym; sym = sym->next)
- if (sym->ksymidx >= 0) {
- ksym->addr = obj_symbol_final_value(f, sym);
- ksym->name =
- (unsigned long) str - (unsigned long) symtab;
-
- str = stpcpy(str, sym->name) + 1;
- ksym++;
- }
- }
- }
-
- if (n_ext_modules_used) {
- struct old_module_ref *ref;
- int i;
-
- ref = (struct old_module_ref *)
- ((char *) symtab->symbol + nsyms * sizeof(struct old_module_symbol));
-
- for (i = 0; i < n_ext_modules; ++i)
- if (ext_modules[i].used)
- ref++->module = ext_modules[i].addr;
- }
- }
-
- /* Fill in routines. */
-
- routines.init =
- obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
- routines.cleanup =
- obj_symbol_final_value(f, obj_find_symbol(f, "cleanup_module"));
-
- /* Whew! All of the initialization is complete. Collect the final
- module image and give it to the kernel. */
-
- image = xmalloc(m_size);
- obj_create_image(f, image);
-
- /* image holds the complete relocated module, accounting correctly for
- mod_use_count. However the old module kernel support assume that
- it is receiving something which does not contain mod_use_count. */
- ret = old_sys_init_module(m_name, image + sizeof(long),
- m_size | (flag_autoclean ? OLD_MOD_AUTOCLEAN
- : 0), &routines, symtab);
- if (ret)
- errorMsg("init_module: %s: %s", m_name, strerror(errno));
-
- free(image);
- free(symtab);
-
- return ret == 0;
-}
-
-#else
-
-#define old_create_mod_use_count(x) TRUE
-#define old_init_module(x, y, z) TRUE
-
-#endif /* BB_FEATURE_INSMOD_OLD_KERNEL */
-
-
-
-/*======================================================================*/
-/* Functions relating to module loading after 2.1.18. */
-
-static int
-new_process_module_arguments(struct obj_file *f, int argc, char **argv)
-{
- while (argc > 0) {
- char *p, *q, *key;
- struct obj_symbol *sym;
- char *contents, *loc;
- int min, max, n;
-
- p = *argv;
- if ((q = strchr(p, '=')) == NULL) {
- argc--;
- continue;
- }
-
- key = alloca(q - p + 6);
- memcpy(key, "parm_", 5);
- memcpy(key + 5, p, q - p);
- key[q - p + 5] = 0;
-
- p = get_modinfo_value(f, key);
- key += 5;
- if (p == NULL) {
- errorMsg("invalid parameter %s", key);
- return 0;
- }
-
- sym = obj_find_symbol(f, key);
-
- /* Also check that the parameter was not resolved from the kernel. */
- if (sym == NULL || sym->secidx > SHN_HIRESERVE) {
- errorMsg("symbol for parameter %s not found", key);
- return 0;
- }
-
- if (isdigit(*p)) {
- min = strtoul(p, &p, 10);
- if (*p == '-')
- max = strtoul(p + 1, &p, 10);
- else
- max = min;
- } else
- min = max = 1;
-
- contents = f->sections[sym->secidx]->contents;
- loc = contents + sym->value;
- n = (*++q != '\0');
-
- while (1) {
- if ((*p == 's') || (*p == 'c')) {
- char *str;
-
- /* Do C quoting if we begin with a ", else slurp the lot. */
- if (*q == '"') {
- char *r;
-
- str = alloca(strlen(q));
- for (r = str, q++; *q != '"'; ++q, ++r) {
- if (*q == '\0') {
- errorMsg("improperly terminated string argument for %s",
- key);
- return 0;
- } else if (*q == '\\')
- switch (*++q) {
- case 'a':
- *r = '\a';
- break;
- case 'b':
- *r = '\b';
- break;
- case 'e':
- *r = '\033';
- break;
- case 'f':
- *r = '\f';
- break;
- case 'n':
- *r = '\n';
- break;
- case 'r':
- *r = '\r';
- break;
- case 't':
- *r = '\t';
- break;
-
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- {
- int c = *q - '0';
- if (q[1] >= '0' && q[1] <= '7') {
- c = (c * 8) + *++q - '0';
- if (q[1] >= '0' && q[1] <= '7')
- c = (c * 8) + *++q - '0';
- }
- *r = c;
- }
- break;
-
- default:
- *r = *q;
- break;
- } else
- *r = *q;
- }
- *r = '\0';
- ++q;
- } else {
- char *r;
-
- /* In this case, the string is not quoted. We will break
- it using the coma (like for ints). If the user wants to
- include comas in a string, he just has to quote it */
-
- /* Search the next coma */
- r = strchr(q, ',');
-
- /* Found ? */
- if (r != (char *) NULL) {
- /* Recopy the current field */
- str = alloca(r - q + 1);
- memcpy(str, q, r - q);
-
- /* I don't know if it is usefull, as the previous case
- doesn't null terminate the string ??? */
- str[r - q] = '\0';
-
- /* Keep next fields */
- q = r;
- } else {
- /* last string */
- str = q;
- q = "";
- }
- }
-
- if (*p == 's') {
- /* Normal string */
- obj_string_patch(f, sym->secidx, loc - contents, str);
- loc += tgt_sizeof_char_p;
- } else {
- /* Array of chars (in fact, matrix !) */
- unsigned long charssize; /* size of each member */
-
- /* Get the size of each member */
- /* Probably we should do that outside the loop ? */
- if (!isdigit(*(p + 1))) {
- errorMsg("parameter type 'c' for %s must be followed by"
- " the maximum size", key);
- return 0;
- }
- charssize = strtoul(p + 1, (char **) NULL, 10);
-
- /* Check length */
- if (strlen(str) >= charssize) {
- errorMsg("string too long for %s (max %ld)", key,
- charssize - 1);
- return 0;
- }
-
- /* Copy to location */
- strcpy((char *) loc, str);
- loc += charssize;
- }
- } else {
- long v = strtoul(q, &q, 0);
- switch (*p) {
- case 'b':
- *loc++ = v;
- break;
- case 'h':
- *(short *) loc = v;
- loc += tgt_sizeof_short;
- break;
- case 'i':
- *(int *) loc = v;
- loc += tgt_sizeof_int;
- break;
- case 'l':
- *(long *) loc = v;
- loc += tgt_sizeof_long;
- break;
-
- default:
- errorMsg("unknown parameter type '%c' for %s", *p, key);
- return 0;
- }
- }
-
- retry_end_of_value:
- switch (*q) {
- case '\0':
- goto end_of_arg;
-
- case ' ':
- case '\t':
- case '\n':
- case '\r':
- ++q;
- goto retry_end_of_value;
-
- case ',':
- if (++n > max) {
- errorMsg("too many values for %s (max %d)", key, max);
- return 0;
- }
- ++q;
- break;
-
- default:
- errorMsg("invalid argument syntax for %s", key);
- return 0;
- }
- }
-
- end_of_arg:
- if (n < min) {
- errorMsg("too few values for %s (min %d)", key, min);
- return 0;
- }
-
- argc--, argv++;
- }
-
- return 1;
-}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-static int new_is_module_checksummed(struct obj_file *f)
-{
- const char *p = get_modinfo_value(f, "using_checksums");
- if (p)
- return atoi(p);
- else
- return 0;
-}
-
-/* Get the module's kernel version in the canonical integer form. */
-
-static int
-new_get_module_version(struct obj_file *f, char str[STRVERSIONLEN])
-{
- char *p, *q;
- int a, b, c;
-
- p = get_modinfo_value(f, "kernel_version");
- if (p == NULL)
- return -1;
- strncpy(str, p, STRVERSIONLEN);
-
- a = strtoul(p, &p, 10);
- if (*p != '.')
- return -1;
- b = strtoul(p + 1, &p, 10);
- if (*p != '.')
- return -1;
- c = strtoul(p + 1, &q, 10);
- if (p + 1 == q)
- return -1;
-
- return a << 16 | b << 8 | c;
-}
-
-#endif /* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-
-#ifdef BB_FEATURE_INSMOD_NEW_KERNEL
-
-/* Fetch the loaded modules, and all currently exported symbols. */
-
-static int new_get_kernel_symbols(void)
-{
- char *module_names, *mn;
- struct external_module *modules, *m;
- struct new_module_symbol *syms, *s;
- size_t ret, bufsize, nmod, nsyms, i, j;
-
- /* Collect the loaded modules. */
-
- module_names = xmalloc(bufsize = 256);
- retry_modules_load:
- if (query_module(NULL, QM_MODULES, module_names, bufsize, &ret)) {
- if (errno == ENOSPC) {
- module_names = xrealloc(module_names, bufsize = ret);
- goto retry_modules_load;
- }
- errorMsg("QM_MODULES: %s", strerror(errno));
- return 0;
- }
-
- n_ext_modules = nmod = ret;
- ext_modules = modules = xmalloc(nmod * sizeof(*modules));
- memset(modules, 0, nmod * sizeof(*modules));
-
- /* Collect the modules' symbols. */
-
- for (i = 0, mn = module_names, m = modules;
- i < nmod; ++i, ++m, mn += strlen(mn) + 1) {
- struct new_module_info info;
-
- if (query_module(mn, QM_INFO, &info, sizeof(info), &ret)) {
- if (errno == ENOENT) {
- /* The module was removed out from underneath us. */
- continue;
- }
- errorMsg("query_module: QM_INFO: %s: %s", mn, strerror(errno));
- return 0;
- }
-
- syms = xmalloc(bufsize = 1024);
- retry_mod_sym_load:
- if (query_module(mn, QM_SYMBOLS, syms, bufsize, &ret)) {
- switch (errno) {
- case ENOSPC:
- syms = xrealloc(syms, bufsize = ret);
- goto retry_mod_sym_load;
- case ENOENT:
- /* The module was removed out from underneath us. */
- continue;
- default:
- errorMsg("query_module: QM_SYMBOLS: %s: %s", mn, strerror(errno));
- return 0;
- }
- }
- nsyms = ret;
-
- m->name = mn;
- m->addr = info.addr;
- m->nsyms = nsyms;
- m->syms = syms;
-
- for (j = 0, s = syms; j < nsyms; ++j, ++s) {
- s->name += (unsigned long) syms;
- }
- }
-
- /* Collect the kernel's symbols. */
-
- syms = xmalloc(bufsize = 16 * 1024);
- retry_kern_sym_load:
- if (query_module(NULL, QM_SYMBOLS, syms, bufsize, &ret)) {
- if (errno == ENOSPC) {
- syms = xrealloc(syms, bufsize = ret);
- goto retry_kern_sym_load;
- }
- errorMsg("kernel: QM_SYMBOLS: %s", strerror(errno));
- return 0;
- }
- nksyms = nsyms = ret;
- ksyms = syms;
-
- for (j = 0, s = syms; j < nsyms; ++j, ++s) {
- s->name += (unsigned long) syms;
- }
- return 1;
-}
-
-
-/* Return the kernel symbol checksum version, or zero if not used. */
-
-static int new_is_kernel_checksummed(void)
-{
- struct new_module_symbol *s;
- size_t i;
-
- /* Using_Versions is not the first symbol, but it should be in there. */
-
- for (i = 0, s = ksyms; i < nksyms; ++i, ++s)
- if (strcmp((char *) s->name, "Using_Versions") == 0)
- return s->value;
-
- return 0;
-}
-
-
-static int new_create_this_module(struct obj_file *f, const char *m_name)
-{
- struct obj_section *sec;
-
- sec = obj_create_alloced_section_first(f, ".this", tgt_sizeof_long,
- sizeof(struct new_module));
- memset(sec->contents, 0, sizeof(struct new_module));
-
- obj_add_symbol(f, "__this_module", -1,
- ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT), sec->idx, 0,
- sizeof(struct new_module));
-
- obj_string_patch(f, sec->idx, offsetof(struct new_module, name),
- m_name);
-
- return 1;
-}
-
-
-static int new_create_module_ksymtab(struct obj_file *f)
-{
- struct obj_section *sec;
- int i;
-
- /* We must always add the module references. */
-
- if (n_ext_modules_used) {
- struct new_module_ref *dep;
- struct obj_symbol *tm;
-
- sec = obj_create_alloced_section(f, ".kmodtab", tgt_sizeof_void_p,
- (sizeof(struct new_module_ref)
- * n_ext_modules_used));
- if (!sec)
- return 0;
-
- tm = obj_find_symbol(f, "__this_module");
- dep = (struct new_module_ref *) sec->contents;
- for (i = 0; i < n_ext_modules; ++i)
- if (ext_modules[i].used) {
- dep->dep = ext_modules[i].addr;
- obj_symbol_patch(f, sec->idx,
- (char *) &dep->ref - sec->contents, tm);
- dep->next_ref = 0;
- ++dep;
- }
- }
-
- if (flag_export && !obj_find_section(f, "__ksymtab")) {
- size_t nsyms;
- int *loaded;
-
- sec =
- obj_create_alloced_section(f, "__ksymtab", tgt_sizeof_void_p,
- 0);
-
- /* We don't want to export symbols residing in sections that
- aren't loaded. There are a number of these created so that
- we make sure certain module options don't appear twice. */
-
- loaded = alloca(sizeof(int) * (i = f->header.e_shnum));
- while (--i >= 0)
- loaded[i] = (f->sections[i]->header.sh_flags & SHF_ALLOC) != 0;
-
- for (nsyms = i = 0; i < HASH_BUCKETS; ++i) {
- struct obj_symbol *sym;
- for (sym = f->symtab[i]; sym; sym = sym->next)
- if (ELFW(ST_BIND) (sym->info) != STB_LOCAL
- && sym->secidx <= SHN_HIRESERVE
- && (sym->secidx >= SHN_LORESERVE
- || loaded[sym->secidx])) {
- ElfW(Addr) ofs = nsyms * 2 * tgt_sizeof_void_p;
-
- obj_symbol_patch(f, sec->idx, ofs, sym);
- obj_string_patch(f, sec->idx, ofs + tgt_sizeof_void_p,
- sym->name);
-
- nsyms++;
- }
- }
-
- obj_extend_section(sec, nsyms * 2 * tgt_sizeof_char_p);
- }
-
- return 1;
-}
-
-
-static int
-new_init_module(const char *m_name, struct obj_file *f,
- unsigned long m_size)
-{
- struct new_module *module;
- struct obj_section *sec;
- void *image;
- int ret;
- tgt_long m_addr;
-
- sec = obj_find_section(f, ".this");
- module = (struct new_module *) sec->contents;
- m_addr = sec->header.sh_addr;
-
- module->size_of_struct = sizeof(*module);
- module->size = m_size;
- module->flags = flag_autoclean ? NEW_MOD_AUTOCLEAN : 0;
-
- sec = obj_find_section(f, "__ksymtab");
- if (sec && sec->header.sh_size) {
- module->syms = sec->header.sh_addr;
- module->nsyms = sec->header.sh_size / (2 * tgt_sizeof_char_p);
- }
-
- if (n_ext_modules_used) {
- sec = obj_find_section(f, ".kmodtab");
- module->deps = sec->header.sh_addr;
- module->ndeps = n_ext_modules_used;
- }
-
- module->init =
- obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
- module->cleanup =
- obj_symbol_final_value(f, obj_find_symbol(f, "cleanup_module"));
-
- sec = obj_find_section(f, "__ex_table");
- if (sec) {
- module->ex_table_start = sec->header.sh_addr;
- module->ex_table_end = sec->header.sh_addr + sec->header.sh_size;
- }
-
- sec = obj_find_section(f, ".text.init");
- if (sec) {
- module->runsize = sec->header.sh_addr - m_addr;
- }
- sec = obj_find_section(f, ".data.init");
- if (sec) {
- if (!module->runsize ||
- module->runsize > sec->header.sh_addr - m_addr)
- module->runsize = sec->header.sh_addr - m_addr;
- }
-
- if (!arch_init_module(f, module))
- return 0;
-
- /* Whew! All of the initialization is complete. Collect the final
- module image and give it to the kernel. */
-
- image = xmalloc(m_size);
- obj_create_image(f, image);
-
- ret = new_sys_init_module(m_name, (struct new_module *) image);
- if (ret)
- errorMsg("init_module: %s: %s", m_name, strerror(errno));
-
- free(image);
-
- return ret == 0;
-}
-
-#else
-
-#define new_init_module(x, y, z) TRUE
-#define new_create_this_module(x, y) 0
-#define new_create_module_ksymtab(x)
-
-#endif /* BB_FEATURE_INSMOD_OLD_KERNEL */
-
-
-/*======================================================================*/
-
-int
-obj_string_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
- const char *string)
-{
- struct obj_string_patch *p;
- struct obj_section *strsec;
- size_t len = strlen(string) + 1;
- char *loc;
-
- p = xmalloc(sizeof(*p));
- p->next = f->string_patches;
- p->reloc_secidx = secidx;
- p->reloc_offset = offset;
- f->string_patches = p;
-
- strsec = obj_find_section(f, ".kstrtab");
- if (strsec == NULL) {
- strsec = obj_create_alloced_section(f, ".kstrtab", 1, len);
- p->string_offset = 0;
- loc = strsec->contents;
- } else {
- p->string_offset = strsec->header.sh_size;
- loc = obj_extend_section(strsec, len);
- }
- memcpy(loc, string, len);
-
- return 1;
-}
-
-int
-obj_symbol_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
- struct obj_symbol *sym)
-{
- struct obj_symbol_patch *p;
-
- p = xmalloc(sizeof(*p));
- p->next = f->symbol_patches;
- p->reloc_secidx = secidx;
- p->reloc_offset = offset;
- p->sym = sym;
- f->symbol_patches = p;
-
- return 1;
-}
-
-int obj_check_undefineds(struct obj_file *f)
-{
- unsigned long i;
- int ret = 1;
-
- for (i = 0; i < HASH_BUCKETS; ++i) {
- struct obj_symbol *sym;
- for (sym = f->symtab[i]; sym; sym = sym->next)
- if (sym->secidx == SHN_UNDEF) {
- if (ELFW(ST_BIND) (sym->info) == STB_WEAK) {
- sym->secidx = SHN_ABS;
- sym->value = 0;
- } else {
- errorMsg("unresolved symbol %s", sym->name);
- ret = 0;
- }
- }
- }
-
- return ret;
-}
-
-void obj_allocate_commons(struct obj_file *f)
-{
- struct common_entry {
- struct common_entry *next;
- struct obj_symbol *sym;
- } *common_head = NULL;
-
- unsigned long i;
-
- for (i = 0; i < HASH_BUCKETS; ++i) {
- struct obj_symbol *sym;
- for (sym = f->symtab[i]; sym; sym = sym->next)
- if (sym->secidx == SHN_COMMON) {
- /* Collect all COMMON symbols and sort them by size so as to
- minimize space wasted by alignment requirements. */
- {
- struct common_entry **p, *n;
- for (p = &common_head; *p; p = &(*p)->next)
- if (sym->size <= (*p)->sym->size)
- break;
-
- n = alloca(sizeof(*n));
- n->next = *p;
- n->sym = sym;
- *p = n;
- }
- }
- }
-
- for (i = 1; i < f->local_symtab_size; ++i) {
- struct obj_symbol *sym = f->local_symtab[i];
- if (sym && sym->secidx == SHN_COMMON) {
- struct common_entry **p, *n;
- for (p = &common_head; *p; p = &(*p)->next)
- if (sym == (*p)->sym)
- break;
- else if (sym->size < (*p)->sym->size) {
- n = alloca(sizeof(*n));
- n->next = *p;
- n->sym = sym;
- *p = n;
- break;
- }
- }
- }
-
- if (common_head) {
- /* Find the bss section. */
- for (i = 0; i < f->header.e_shnum; ++i)
- if (f->sections[i]->header.sh_type == SHT_NOBITS)
- break;
-
- /* If for some reason there hadn't been one, create one. */
- if (i == f->header.e_shnum) {
- struct obj_section *sec;
-
- f->sections = xrealloc(f->sections, (i + 1) * sizeof(sec));
- f->sections[i] = sec = arch_new_section();
- f->header.e_shnum = i + 1;
-
- memset(sec, 0, sizeof(*sec));
- sec->header.sh_type = SHT_PROGBITS;
- sec->header.sh_flags = SHF_WRITE | SHF_ALLOC;
- sec->name = ".bss";
- sec->idx = i;
- }
-
- /* Allocate the COMMONS. */
- {
- ElfW(Addr) bss_size = f->sections[i]->header.sh_size;
- ElfW(Addr) max_align = f->sections[i]->header.sh_addralign;
- struct common_entry *c;
-
- for (c = common_head; c; c = c->next) {
- ElfW(Addr) align = c->sym->value;
-
- if (align > max_align)
- max_align = align;
- if (bss_size & (align - 1))
- bss_size = (bss_size | (align - 1)) + 1;
-
- c->sym->secidx = i;
- c->sym->value = bss_size;
-
- bss_size += c->sym->size;
- }
-
- f->sections[i]->header.sh_size = bss_size;
- f->sections[i]->header.sh_addralign = max_align;
- }
- }
-
- /* For the sake of patch relocation and parameter initialization,
- allocate zeroed data for NOBITS sections now. Note that after
- this we cannot assume NOBITS are really empty. */
- for (i = 0; i < f->header.e_shnum; ++i) {
- struct obj_section *s = f->sections[i];
- if (s->header.sh_type == SHT_NOBITS) {
- s->contents = memset(xmalloc(s->header.sh_size),
- 0, s->header.sh_size);
- s->header.sh_type = SHT_PROGBITS;
- }
- }
-}
-
-unsigned long obj_load_size(struct obj_file *f)
-{
- unsigned long dot = 0;
- struct obj_section *sec;
-
- /* Finalize the positions of the sections relative to one another. */
-
- for (sec = f->load_order; sec; sec = sec->load_next) {
- ElfW(Addr) align;
-
- align = sec->header.sh_addralign;
- if (align && (dot & (align - 1)))
- dot = (dot | (align - 1)) + 1;
-
- sec->header.sh_addr = dot;
- dot += sec->header.sh_size;
- }
-
- return dot;
-}
-
-int obj_relocate(struct obj_file *f, ElfW(Addr) base)
-{
- int i, n = f->header.e_shnum;
- int ret = 1;
-
- /* Finalize the addresses of the sections. */
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
-
- /* And iterate over all of the relocations. */
-
- for (i = 0; i < n; ++i) {
- struct obj_section *relsec, *symsec, *targsec, *strsec;
- ElfW(RelM) * rel, *relend;
- ElfW(Sym) * symtab;
- const char *strtab;
-
- relsec = f->sections[i];
- if (relsec->header.sh_type != SHT_RELM)
- continue;
-
- symsec = f->sections[relsec->header.sh_link];
- targsec = f->sections[relsec->header.sh_info];
- strsec = f->sections[symsec->header.sh_link];
-
- rel = (ElfW(RelM) *) relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(ElfW(RelM)));
- symtab = (ElfW(Sym) *) symsec->contents;
- strtab = (const char *) strsec->contents;
-
- for (; rel < relend; ++rel) {
- ElfW(Addr) value = 0;
- struct obj_symbol *intsym = NULL;
- unsigned long symndx;
- ElfW(Sym) * extsym = 0;
- const char *errmsg;
-
- /* Attempt to find a value to use for this relocation. */
-
- symndx = ELFW(R_SYM) (rel->r_info);
- if (symndx) {
- /* Note we've already checked for undefined symbols. */
-
- extsym = &symtab[symndx];
- if (ELFW(ST_BIND) (extsym->st_info) == STB_LOCAL) {
- /* Local symbols we look up in the local table to be sure
- we get the one that is really intended. */
- intsym = f->local_symtab[symndx];
- } else {
- /* Others we look up in the hash table. */
- const char *name;
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym = obj_find_symbol(f, name);
- }
-
- value = obj_symbol_final_value(f, intsym);
- intsym->referenced = 1;
- }
-#if SHT_RELM == SHT_RELA
-#if defined(__alpha__) && defined(AXP_BROKEN_GAS)
- /* Work around a nasty GAS bug, that is fixed as of 2.7.0.9. */
- if (!extsym || !extsym->st_name ||
- ELFW(ST_BIND) (extsym->st_info) != STB_LOCAL)
-#endif
- value += rel->r_addend;
-#endif
-
- /* Do it! */
- switch (arch_apply_relocation
- (f, targsec, symsec, intsym, rel, value)) {
- case obj_reloc_ok:
- break;
-
- case obj_reloc_overflow:
- errmsg = "Relocation overflow";
- goto bad_reloc;
- case obj_reloc_dangerous:
- errmsg = "Dangerous relocation";
- goto bad_reloc;
- case obj_reloc_unhandled:
- errmsg = "Unhandled relocation";
- bad_reloc:
- if (extsym) {
- errorMsg("%s of type %ld for %s", errmsg,
- (long) ELFW(R_TYPE) (rel->r_info),
- strtab + extsym->st_name);
- } else {
- errorMsg("%s of type %ld", errmsg,
- (long) ELFW(R_TYPE) (rel->r_info));
- }
- ret = 0;
- break;
- }
- }
- }
-
- /* Finally, take care of the patches. */
-
- if (f->string_patches) {
- struct obj_string_patch *p;
- struct obj_section *strsec;
- ElfW(Addr) strsec_base;
- strsec = obj_find_section(f, ".kstrtab");
- strsec_base = strsec->header.sh_addr;
-
- for (p = f->string_patches; p; p = p->next) {
- struct obj_section *targsec = f->sections[p->reloc_secidx];
- *(ElfW(Addr) *) (targsec->contents + p->reloc_offset)
- = strsec_base + p->string_offset;
- }
- }
-
- if (f->symbol_patches) {
- struct obj_symbol_patch *p;
-
- for (p = f->symbol_patches; p; p = p->next) {
- struct obj_section *targsec = f->sections[p->reloc_secidx];
- *(ElfW(Addr) *) (targsec->contents + p->reloc_offset)
- = obj_symbol_final_value(f, p->sym);
- }
- }
-
- return ret;
-}
-
-int obj_create_image(struct obj_file *f, char *image)
-{
- struct obj_section *sec;
- ElfW(Addr) base = f->baseaddr;
-
- for (sec = f->load_order; sec; sec = sec->load_next) {
- char *secimg;
-
- if (sec->header.sh_size == 0)
- continue;
-
- secimg = image + (sec->header.sh_addr - base);
-
- /* Note that we allocated data for NOBITS sections earlier. */
- memcpy(secimg, sec->contents, sec->header.sh_size);
- }
-
- return 1;
-}
-
-/*======================================================================*/
-
-struct obj_file *obj_load(FILE * fp)
-{
- struct obj_file *f;
- ElfW(Shdr) * section_headers;
- int shnum, i;
- char *shstrtab;
-
- /* Read the file header. */
-
- f = arch_new_file();
- memset(f, 0, sizeof(*f));
- f->symbol_cmp = strcmp;
- f->symbol_hash = obj_elf_hash;
- f->load_order_search_start = &f->load_order;
-
- fseek(fp, 0, SEEK_SET);
- if (fread(&f->header, sizeof(f->header), 1, fp) != 1) {
- errorMsg("error reading ELF header: %s", strerror(errno));
- return NULL;
- }
-
- if (f->header.e_ident[EI_MAG0] != ELFMAG0
- || f->header.e_ident[EI_MAG1] != ELFMAG1
- || f->header.e_ident[EI_MAG2] != ELFMAG2
- || f->header.e_ident[EI_MAG3] != ELFMAG3) {
- errorMsg("not an ELF file");
- return NULL;
- }
- if (f->header.e_ident[EI_CLASS] != ELFCLASSM
- || f->header.e_ident[EI_DATA] != ELFDATAM
- || f->header.e_ident[EI_VERSION] != EV_CURRENT
- || !MATCH_MACHINE(f->header.e_machine)) {
- errorMsg("ELF file not for this architecture");
- return NULL;
- }
- if (f->header.e_type != ET_REL) {
- errorMsg("ELF file not a relocatable object");
- return NULL;
- }
-
- /* Read the section headers. */
-
- if (f->header.e_shentsize != sizeof(ElfW(Shdr))) {
- errorMsg("section header size mismatch: %lu != %lu",
- (unsigned long) f->header.e_shentsize,
- (unsigned long) sizeof(ElfW(Shdr)));
- return NULL;
- }
-
- shnum = f->header.e_shnum;
- f->sections = xmalloc(sizeof(struct obj_section *) * shnum);
- memset(f->sections, 0, sizeof(struct obj_section *) * shnum);
-
- section_headers = alloca(sizeof(ElfW(Shdr)) * shnum);
- fseek(fp, f->header.e_shoff, SEEK_SET);
- if (fread(section_headers, sizeof(ElfW(Shdr)), shnum, fp) != shnum) {
- errorMsg("error reading ELF section headers: %s", strerror(errno));
- return NULL;
- }
-
- /* Read the section data. */
-
- for (i = 0; i < shnum; ++i) {
- struct obj_section *sec;
-
- f->sections[i] = sec = arch_new_section();
- memset(sec, 0, sizeof(*sec));
-
- sec->header = section_headers[i];
- sec->idx = i;
-
- switch (sec->header.sh_type) {
- case SHT_NULL:
- case SHT_NOTE:
- case SHT_NOBITS:
- /* ignore */
- break;
-
- case SHT_PROGBITS:
- case SHT_SYMTAB:
- case SHT_STRTAB:
- case SHT_RELM:
- if (sec->header.sh_size > 0) {
- sec->contents = xmalloc(sec->header.sh_size);
- fseek(fp, sec->header.sh_offset, SEEK_SET);
- if (fread(sec->contents, sec->header.sh_size, 1, fp) != 1) {
- errorMsg("error reading ELF section data: %s", strerror(errno));
- return NULL;
- }
- } else {
- sec->contents = NULL;
- }
- break;
-
-#if SHT_RELM == SHT_REL
- case SHT_RELA:
- errorMsg("RELA relocations not supported on this architecture");
- return NULL;
-#else
- case SHT_REL:
- errorMsg("REL relocations not supported on this architecture");
- return NULL;
-#endif
-
- default:
- if (sec->header.sh_type >= SHT_LOPROC) {
- /* Assume processor specific section types are debug
- info and can safely be ignored. If this is ever not
- the case (Hello MIPS?), don't put ifdefs here but
- create an arch_load_proc_section(). */
- break;
- }
-
- errorMsg("can't handle sections of type %ld",
- (long) sec->header.sh_type);
- return NULL;
- }
- }
-
- /* Do what sort of interpretation as needed by each section. */
-
- shstrtab = f->sections[f->header.e_shstrndx]->contents;
-
- for (i = 0; i < shnum; ++i) {
- struct obj_section *sec = f->sections[i];
- sec->name = shstrtab + sec->header.sh_name;
- }
-
- for (i = 0; i < shnum; ++i) {
- struct obj_section *sec = f->sections[i];
-
- if (sec->header.sh_flags & SHF_ALLOC)
- obj_insert_section_load_order(f, sec);
-
- switch (sec->header.sh_type) {
- case SHT_SYMTAB:
- {
- unsigned long nsym, j;
- char *strtab;
- ElfW(Sym) * sym;
-
- if (sec->header.sh_entsize != sizeof(ElfW(Sym))) {
- errorMsg("symbol size mismatch: %lu != %lu",
- (unsigned long) sec->header.sh_entsize,
- (unsigned long) sizeof(ElfW(Sym)));
- return NULL;
- }
-
- nsym = sec->header.sh_size / sizeof(ElfW(Sym));
- strtab = f->sections[sec->header.sh_link]->contents;
- sym = (ElfW(Sym) *) sec->contents;
-
- /* Allocate space for a table of local symbols. */
- j = f->local_symtab_size = sec->header.sh_info;
- f->local_symtab = xmalloc(j *=
- sizeof(struct obj_symbol *));
- memset(f->local_symtab, 0, j);
-
- /* Insert all symbols into the hash table. */
- for (j = 1, ++sym; j < nsym; ++j, ++sym) {
- const char *name;
- if (sym->st_name)
- name = strtab + sym->st_name;
- else
- name = f->sections[sym->st_shndx]->name;
-
- obj_add_symbol(f, name, j, sym->st_info, sym->st_shndx,
- sym->st_value, sym->st_size);
- }
- }
- break;
-
- case SHT_RELM:
- if (sec->header.sh_entsize != sizeof(ElfW(RelM))) {
- errorMsg("relocation entry size mismatch: %lu != %lu",
- (unsigned long) sec->header.sh_entsize,
- (unsigned long) sizeof(ElfW(RelM)));
- return NULL;
- }
- break;
- }
- }
-
- return f;
-}
-
-static void hide_special_symbols(struct obj_file *f)
-{
- static const char *const specials[] = {
- "cleanup_module",
- "init_module",
- "kernel_version",
- NULL
- };
-
- struct obj_symbol *sym;
- const char *const *p;
-
- for (p = specials; *p; ++p)
- if ((sym = obj_find_symbol(f, *p)) != NULL)
- sym->info =
- ELFW(ST_INFO) (STB_LOCAL, ELFW(ST_TYPE) (sym->info));
-}
-
-
-void my_usage(void)
-{
- printf("Usage.");
- exit(0);
-}
-
-extern int insmod_main( int argc, char **argv)
-{
- int k_crcs;
- int k_new_syscalls;
- int len;
- char *tmp;
- unsigned long m_size;
- ElfW(Addr) m_addr;
- FILE *fp;
- struct obj_file *f;
- char m_name[BUFSIZ + 1] = "\0";
- int exit_status = FALSE;
- int m_has_modinfo;
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
- int k_version;
- char k_strversion[STRVERSIONLEN];
- char m_strversion[STRVERSIONLEN];
- int m_version;
- int m_crcs;
-#endif
-
-
- if (argc <= 1)
- my_usage();
-
- argv++; argc--;
-
- /* Grab the module name */
- if ((tmp = strrchr(*argv, '/')) != NULL) {
- tmp++;
- } else {
- tmp = *argv;
- }
- len = strlen(tmp);
-
- if (len > 2 && tmp[len - 2] == '.' && tmp[len - 1] == 'o')
- len -= 2;
- memcpy(m_name, tmp, len);
- strcpy(m_fullName, m_name);
- strcat(m_fullName, ".o");
-
- /* Get a filedesc for the module */
- if ((fp = fopen(*argv, "r")) == NULL) {
- errorMsg("Module %s not found", *argv);
- return -1;
- } else
- memcpy(m_filename, *argv, strlen(*argv));
-
-
- if ((f = obj_load(fp)) == NULL) {
- logperror("Could not load the module");
- goto out;
- }
-
- if (get_modinfo_value(f, "kernel_version") == NULL)
- m_has_modinfo = 0;
- else
- m_has_modinfo = 1;
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
- /* Version correspondence? */
-
- k_version = get_kernel_version(k_strversion);
- if (m_has_modinfo) {
- m_version = new_get_module_version(f, m_strversion);
- } else {
- m_version = old_get_module_version(f, m_strversion);
- if (m_version == -1) {
- errorMsg("couldn't find the kernel version the module was "
- "compiled for");
- goto out;
- }
- }
-
- if (strncmp(k_strversion, m_strversion, STRVERSIONLEN) != 0) {
- if (flag_force_load) {
- errorMsg("Warning: kernel-module version mismatch\n"
- "\t%s was compiled for kernel version %s\n"
- "\twhile this kernel is version %s",
- m_filename, m_strversion, k_strversion);
- } else {
- errorMsg("kernel-module version mismatch\n"
- "\t%s was compiled for kernel version %s\n"
- "\twhile this kernel is version %s.",
- m_filename, m_strversion, k_strversion);
- goto out;
- }
- }
- k_crcs = 0;
-#endif /* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
- k_new_syscalls = !query_module(NULL, 0, NULL, 0, NULL);
-
- if (k_new_syscalls) {
-#ifdef BB_FEATURE_INSMOD_NEW_KERNEL
- if (!new_get_kernel_symbols())
- goto out;
- k_crcs = new_is_kernel_checksummed();
-#else
- errorMsg("Not configured to support new kernels");
- goto out;
-#endif
- } else {
-#ifdef BB_FEATURE_INSMOD_OLD_KERNEL
- if (!old_get_kernel_symbols(m_name))
- goto out;
- k_crcs = old_is_kernel_checksummed();
-#else
- errorMsg("Not configured to support old kernels");
- goto out;
-#endif
- }
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
- if (m_has_modinfo)
- m_crcs = new_is_module_checksummed(f);
- else
- m_crcs = old_is_module_checksummed(f);
-
- if (m_crcs != k_crcs)
- obj_set_symbol_compare(f, ncv_strcmp, ncv_symbol_hash);
-#endif /* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
- /* Let the module know about the kernel symbols. */
- add_kernel_symbols(f);
-
- /* Allocate common symbols, symbol tables, and string tables. */
-
- if (k_new_syscalls
- ? !new_create_this_module(f, m_name)
- : !old_create_mod_use_count(f))
- {
- goto out;
- }
-
- if (!obj_check_undefineds(f)) {
- goto out;
- }
- obj_allocate_commons(f);
-
- if (m_has_modinfo
- ? !new_process_module_arguments(f, argc-1, argv+1)
- : !old_process_module_arguments(f, argc-1, argv+1))
- {
- goto out;
- }
-
- arch_create_got(f);
- hide_special_symbols(f);
-
- if (k_new_syscalls)
- new_create_module_ksymtab(f);
-
- /* Find current size of the module */
- m_size = obj_load_size(f);
-
-
- errno = 0;
- m_addr = create_module(m_name, m_size);
- switch (errno) {
- case 0:
- break;
- case EEXIST:
- errorMsg("A module named %s already exists", m_name);
- /* Considered as a success in stage1 */
- fclose(fp);
- return(TRUE);
- case ENOMEM:
- errorMsg("Can't allocate kernel memory for module; needed %lu bytes",
- m_size);
- goto out;
- default:
- errorMsg("create_module: %s: %s", m_name, strerror(errno));
- goto out;
- }
-
- if (!obj_relocate(f, m_addr)) {
- delete_module(m_name);
- goto out;
- }
-
- if (k_new_syscalls
- ? !new_init_module(m_name, f, m_size)
- : !old_init_module(m_name, f, m_size))
- {
- delete_module(m_name);
- goto out;
- }
-
- exit_status = TRUE;
-
-out:
- fclose(fp);
- return(exit_status);
-}
-
-
-int insmod_call(char * full_filename, char * params)
-{
- int argc = 2;
- char *argv[50];
- char * ptr = params;
- argv[0] = "stage1";
- argv[1] = full_filename;
-
- while (ptr != NULL) {
- argv[argc] = ptr;
- argc++;
- ptr = strchr(ptr, ' ');
- if (ptr) {
- ptr[0] = '\0';
- ptr++;
- }
- }
-
- return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-busybox/loop.h b/mdk-stage1/insmod-busybox/loop.h
deleted file mode 100644
index cba8c6b2b..000000000
--- a/mdk-stage1/insmod-busybox/loop.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/posix_types.h>
-#undef dev_t
-#define dev_t __kernel_dev_t
-#include <linux/loop.h>
-#undef dev_t
diff --git a/mdk-stage1/insmod-busybox/messages.c b/mdk-stage1/insmod-busybox/messages.c
deleted file mode 100644
index 81fd9c75c..000000000
--- a/mdk-stage1/insmod-busybox/messages.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Copyright (C) 2000 by BitterSweet Enterprises, LLC.
- * Written by Karl M. Hegbloom <karlheg@debian.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*
- * Let's put all of these messages in one place, and link this in as
- * a separate object module, so that there are not going to be
- * multiple non-unique but very similar strings in the binary.
- * Perhaps this will make it simpler to internationalize also, and
- * may make the binary slightly smaller.
- */
-
-// To use this header file, include something like this:
-//
-//#define BB_DECLARE_EXTERN
-//#define bb_need_memory_exhausted
-//#include "messages.c"
-//
-//Then just use the string memory_exhausted when it is needed.
-//
-
-#include "busybox.h"
-#ifndef _BB_MESSAGES_C
-#define _BB_MESSAGES_C
-
-#ifdef BB_DECLARE_EXTERN
-# define BB_DEF_MESSAGE(symbol, string_const) extern const char *symbol;
-#else
-# define BB_DEF_MESSAGE(symbol, string_const) const char *symbol = string_const;
-#endif
-
-
-#if defined bb_need_full_version || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(full_version,
- "BusyBox v" BB_VER " (" BB_BT ") multi-call binary -- GPL2")
-#endif
-#if defined bb_need_name_too_long || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(name_too_long, "file name too long\n")
-#endif
-#if defined bb_need_omitting_directory || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(omitting_directory, "%s: omitting directory\n")
-#endif
-#if defined bb_need_not_a_directory || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(not_a_directory, "%s: not a directory\n")
-#endif
-#if defined bb_need_memory_exhausted || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(memory_exhausted, "memory exhausted\n")
-#endif
-#if defined bb_need_invalid_date || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(invalid_date, "invalid date `%s'\n")
-#endif
-#if defined bb_need_invalid_option || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(invalid_option, "invalid option -- %c\n")
-#endif
-#if defined bb_need_io_error || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(io_error, "%s: input/output error -- %s\n")
-#endif
-#if defined bb_need_help || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(dash_dash_help, "--help")
-#endif
-#if defined bb_need_write_error || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(write_error, "Write Error\n")
-#endif
-#if defined bb_need_too_few_args || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(too_few_args, "too few arguments\n")
-#endif
-#if defined bb_need_name_longer_then_foo || ! defined BB_DECLARE_EXTERN
- BB_DEF_MESSAGE(name_longer_then_foo, "Names longer then %d chars not supported.\n")
-#endif
-
-
-#endif /* _BB_MESSAGES_C */
-
diff --git a/mdk-stage1/insmod-busybox/utility.c b/mdk-stage1/insmod-busybox/utility.c
deleted file mode 100644
index ffd323347..000000000
--- a/mdk-stage1/insmod-busybox/utility.c
+++ /dev/null
@@ -1,1759 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Utility routines.
- *
- * Copyright (C) tons of folks. Tracking down who wrote what
- * isn't something I'm going to worry about... If you wrote something
- * here, please feel free to acknowledge your work.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Based in part on code from sash, Copyright (c) 1999 by David I. Bell
- * Permission has been granted to redistribute this code under the GPL.
- *
- */
-
-#include "busybox.h"
-#if defined (BB_CHMOD_CHOWN_CHGRP) \
- || defined (BB_CP_MV) \
- || defined (BB_FIND) \
- || defined (BB_INSMOD) \
- || defined (BB_LS) \
- || defined (BB_RM) \
- || defined (BB_TAR)
-/* same conditions as recursiveAction */
-#define bb_need_name_too_long
-#endif
-#define bb_need_memory_exhausted
-#define bb_need_full_version
-#define BB_DECLARE_EXTERN
-#include "messages.c"
-
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <dirent.h>
-#include <time.h>
-#include <utime.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <sys/ioctl.h>
-#include <sys/utsname.h> /* for uname(2) */
-
-/* Busybox mount uses either /proc/filesystems or /dev/mtab to get the
- * list of available filesystems used for the -t auto option */
-#if defined BB_FEATURE_USE_PROCFS && defined BB_FEATURE_USE_DEVPS_PATCH
-//#error Sorry, but busybox can't use both /proc and /dev/ps at the same time -- Pick one and try again.
-#error "Sorry, but busybox can't use both /proc and /dev/ps at the same time -- Pick one and try again."
-#endif
-
-
-#if defined BB_MOUNT || defined BB_UMOUNT || defined BB_DF
-# if defined BB_MTAB
-const char mtab_file[] = "/etc/mtab";
-# else
-# if defined BB_FEATURE_USE_PROCFS
-const char mtab_file[] = "/proc/mounts";
-# else
-# if defined BB_FEATURE_USE_DEVPS_PATCH
-const char mtab_file[] = "/dev/mtab";
-# else
-# error With (BB_MOUNT||BB_UMOUNT||BB_DF) defined, you must define either BB_MTAB or ( BB_FEATURE_USE_PROCFS | BB_FEATURE_USE_DEVPS_PATCH)
-# endif
-# endif
-# endif
-#endif
-
-#ifdef _STANDALONE_
-void errorMsg(const char *s, ...)
-{
- va_list p;
-
- fflush(stdout);
- printf("busybox: ");
- va_start(p, s);
- vprintf(s, p);
- va_end(p);
- printf("\n");
- fflush(stdout);
-}
-
-extern void logperror(char *s)
-{
- perror(s);
-}
-
-void fatalError(const char *s, ...)
-{
- va_list p;
-
- fflush(stdout);
- fprintf(stdout, "busybox: ");
- va_start(p, s);
- vfprintf(stdout, s, p);
- va_end(p);
- fprintf(stdout, "\n");
- fflush(stdout);
- exit(FALSE);
-}
-#else /* _STANDALONE_ */
-#include "../log.h"
-extern void errorMsg(const char *s, ...)
-{
- va_list p;
-
- va_start(p, s);
- vlog_message(s, p);
- va_end(p);
-}
-
-extern void logperror(char *s)
-{
- log_perror(s);
-}
-
-extern void fatalError(const char *s, ...)
-{
- va_list p;
-
- va_start(p, s);
- vlog_message(s, p);
- va_end(p);
- while (1);
-}
-#endif /* _STANDALONE_ */
-
-
-#if defined BB_INIT
-/* Returns kernel version encoded as major*65536 + minor*256 + patch,
- * so, for example, to check if the kernel is greater than 2.2.11:
- * if (get_kernel_revision() <= 2*65536+2*256+11) { <stuff> }
- */
-extern int get_kernel_revision(void)
-{
- struct utsname name;
- int major = 0, minor = 0, patch = 0;
-
- if (uname(&name) == -1) {
- perror("cannot get system information");
- return (0);
- }
- sscanf(name.version, "%d.%d.%d", &major, &minor, &patch);
- return major * 65536 + minor * 256 + patch;
-}
-#endif /* BB_INIT */
-
-
-
-#if defined BB_FREE || defined BB_INIT || defined BB_UNAME || defined BB_UPTIME
-_syscall1(int, sysinfo, struct sysinfo *, info);
-#endif /* BB_INIT */
-
-#if defined BB_MOUNT || defined BB_UMOUNT
-
-#ifndef __NR_umount2
-#define __NR_umount2 52
-#endif
-
-/* Include our own version of <sys/mount.h>, since libc5 doesn't
- * know about umount2 */
-extern _syscall1(int, umount, const char *, special_file);
-extern _syscall2(int, umount2, const char *, special_file, int, flags);
-extern _syscall5(int, mount, const char *, special_file, const char *, dir,
- const char *, fstype, unsigned long int, rwflag, const void *, data);
-#endif
-
-#if defined BB_INSMOD || defined BB_LSMOD
-#ifndef __NR_query_module
-#define __NR_query_module 167
-#endif
-_syscall5(int, query_module, const char *, name, int, which,
- void *, buf, size_t, bufsize, size_t*, ret);
-#endif
-
-
-#if defined (BB_CP_MV) || defined (BB_DU)
-
-#define HASH_SIZE 311 /* Should be prime */
-#define hash_inode(i) ((i) % HASH_SIZE)
-
-static ino_dev_hashtable_bucket_t *ino_dev_hashtable[HASH_SIZE];
-
-/*
- * Return 1 if statbuf->st_ino && statbuf->st_dev are recorded in
- * `ino_dev_hashtable', else return 0
- *
- * If NAME is a non-NULL pointer to a character pointer, and there is
- * a match, then set *NAME to the value of the name slot in that
- * bucket.
- */
-int is_in_ino_dev_hashtable(const struct stat *statbuf, char **name)
-{
- ino_dev_hashtable_bucket_t *bucket;
-
- bucket = ino_dev_hashtable[hash_inode(statbuf->st_ino)];
- while (bucket != NULL) {
- if ((bucket->ino == statbuf->st_ino) &&
- (bucket->dev == statbuf->st_dev))
- {
- if (name) *name = bucket->name;
- return 1;
- }
- bucket = bucket->next;
- }
- return 0;
-}
-
-/* Add statbuf to statbuf hash table */
-void add_to_ino_dev_hashtable(const struct stat *statbuf, const char *name)
-{
- int i;
- size_t s;
- ino_dev_hashtable_bucket_t *bucket;
-
- i = hash_inode(statbuf->st_ino);
- s = name ? strlen(name) : 0;
- bucket = xmalloc(sizeof(ino_dev_hashtable_bucket_t) + s);
- bucket->ino = statbuf->st_ino;
- bucket->dev = statbuf->st_dev;
- if (name)
- strcpy(bucket->name, name);
- else
- bucket->name[0] = '\0';
- bucket->next = ino_dev_hashtable[i];
- ino_dev_hashtable[i] = bucket;
-}
-
-/* Clear statbuf hash table */
-void reset_ino_dev_hashtable(void)
-{
- int i;
- ino_dev_hashtable_bucket_t *bucket;
-
- for (i = 0; i < HASH_SIZE; i++) {
- while (ino_dev_hashtable[i] != NULL) {
- bucket = ino_dev_hashtable[i]->next;
- free(ino_dev_hashtable[i]);
- ino_dev_hashtable[i] = bucket;
- }
- }
-}
-
-#endif /* BB_CP_MV || BB_DU */
-
-#if defined (BB_CP_MV) || defined (BB_DU) || defined (BB_LN) || defined (BB_AR)
-/*
- * Return TRUE if a fileName is a directory.
- * Nonexistant files return FALSE.
- */
-int isDirectory(const char *fileName, const int followLinks, struct stat *statBuf)
-{
- int status;
- int didMalloc = 0;
-
- if (statBuf == NULL) {
- statBuf = (struct stat *)xmalloc(sizeof(struct stat));
- ++didMalloc;
- }
-
- if (followLinks == TRUE)
- status = stat(fileName, statBuf);
- else
- status = lstat(fileName, statBuf);
-
- if (status < 0 || !(S_ISDIR(statBuf->st_mode))) {
- status = FALSE;
- }
- else status = TRUE;
-
- if (didMalloc) {
- free(statBuf);
- statBuf = NULL;
- }
- return status;
-}
-#endif
-
-#if defined (BB_AR) || defined BB_CP_MV
-/*
- * Copy readSize bytes between two file descriptors
- */
-int copySubFile(int srcFd, int dstFd, size_t remaining)
-{
- size_t size;
- char buffer[BUFSIZ];
-
- while (remaining > 0) {
- if (remaining > BUFSIZ)
- size = BUFSIZ;
- else
- size = remaining;
- if (fullWrite(dstFd, buffer, fullRead(srcFd, buffer, size)) < size)
- return(FALSE);
- remaining -= size;
- }
- return (TRUE);
-}
-#endif
-
-
-#if defined (BB_CP_MV)
-/*
- * Copy one file to another, while possibly preserving its modes, times, and
- * modes. Returns TRUE if successful, or FALSE on a failure with an error
- * message output. (Failure is not indicated if attributes cannot be set.)
- * -Erik Andersen
- */
-int
-copyFile(const char *srcName, const char *destName,
- int setModes, int followLinks, int forceFlag)
-{
- int rfd;
- int wfd;
- int status;
- struct stat srcStatBuf;
- struct stat dstStatBuf;
- struct utimbuf times;
-
- if (followLinks == TRUE)
- status = stat(srcName, &srcStatBuf);
- else
- status = lstat(srcName, &srcStatBuf);
-
- if (status < 0) {
- perror(srcName);
- return FALSE;
- }
-
- if (followLinks == TRUE)
- status = stat(destName, &dstStatBuf);
- else
- status = lstat(destName, &dstStatBuf);
-
- if (status < 0 || forceFlag==TRUE) {
- unlink(destName);
- dstStatBuf.st_ino = -1;
- dstStatBuf.st_dev = -1;
- }
-
- if ((srcStatBuf.st_dev == dstStatBuf.st_dev) &&
- (srcStatBuf.st_ino == dstStatBuf.st_ino)) {
- errorMsg("Copying file \"%s\" to itself\n", srcName);
- return FALSE;
- }
-
- if (S_ISDIR(srcStatBuf.st_mode)) {
- //fprintf(stderr, "copying directory %s to %s\n", srcName, destName);
- /* Make sure the directory is writable */
- status = mkdir(destName, 0777777 ^ umask(0));
- if (status < 0 && errno != EEXIST) {
- perror(destName);
- return FALSE;
- }
- } else if (S_ISLNK(srcStatBuf.st_mode)) {
- char link_val[BUFSIZ + 1];
- int link_size;
-
- //fprintf(stderr, "copying link %s to %s\n", srcName, destName);
- /* Warning: This could possibly truncate silently, to BUFSIZ chars */
- link_size = readlink(srcName, &link_val[0], BUFSIZ);
- if (link_size < 0) {
- perror(srcName);
- return FALSE;
- }
- link_val[link_size] = '\0';
- status = symlink(link_val, destName);
- if (status < 0) {
- perror(destName);
- return FALSE;
- }
-#if (__GLIBC__ >= 2) && (__GLIBC_MINOR__ >= 1)
- if (setModes == TRUE) {
- /* Try to set owner, but fail silently like GNU cp */
- lchown(destName, srcStatBuf.st_uid, srcStatBuf.st_gid);
- }
-#endif
- return TRUE;
- } else if (S_ISFIFO(srcStatBuf.st_mode)) {
- //fprintf(stderr, "copying fifo %s to %s\n", srcName, destName);
- if (mkfifo(destName, 0644) < 0) {
- perror(destName);
- return FALSE;
- }
- } else if (S_ISBLK(srcStatBuf.st_mode) || S_ISCHR(srcStatBuf.st_mode)
- || S_ISSOCK(srcStatBuf.st_mode)) {
- //fprintf(stderr, "copying soc, blk, or chr %s to %s\n", srcName, destName);
- if (mknod(destName, srcStatBuf.st_mode, srcStatBuf.st_rdev) < 0) {
- perror(destName);
- return FALSE;
- }
- } else if (S_ISREG(srcStatBuf.st_mode)) {
- //fprintf(stderr, "copying regular file %s to %s\n", srcName, destName);
- rfd = open(srcName, O_RDONLY);
- if (rfd < 0) {
- perror(srcName);
- return FALSE;
- }
-
- wfd = open(destName, O_WRONLY | O_CREAT | O_TRUNC,
- srcStatBuf.st_mode);
- if (wfd < 0) {
- perror(destName);
- close(rfd);
- return FALSE;
- }
-
- if (copySubFile(rfd, wfd, srcStatBuf.st_size)==FALSE)
- goto error_exit;
-
- close(rfd);
- if (close(wfd) < 0) {
- return FALSE;
- }
- }
-
- if (setModes == TRUE) {
- /* This is fine, since symlinks never get here */
- if (chown(destName, srcStatBuf.st_uid, srcStatBuf.st_gid) < 0) {
- perror(destName);
- exit FALSE;
- }
- if (chmod(destName, srcStatBuf.st_mode) < 0) {
- perror(destName);
- exit FALSE;
- }
- times.actime = srcStatBuf.st_atime;
- times.modtime = srcStatBuf.st_mtime;
- if (utime(destName, &times) < 0) {
- perror(destName);
- exit FALSE;
- }
- }
-
- return TRUE;
-
- error_exit:
- perror(destName);
- close(rfd);
- close(wfd);
-
- return FALSE;
-}
-#endif /* BB_CP_MV */
-
-
-
-#if defined BB_TAR || defined BB_LS ||defined BB_AR
-
-#define TYPEINDEX(mode) (((mode) >> 12) & 0x0f)
-#define TYPECHAR(mode) ("0pcCd?bB-?l?s???" [TYPEINDEX(mode)])
-
-/* The special bits. If set, display SMODE0/1 instead of MODE0/1 */
-static const mode_t SBIT[] = {
- 0, 0, S_ISUID,
- 0, 0, S_ISGID,
- 0, 0, S_ISVTX
-};
-
-/* The 9 mode bits to test */
-static const mode_t MBIT[] = {
- S_IRUSR, S_IWUSR, S_IXUSR,
- S_IRGRP, S_IWGRP, S_IXGRP,
- S_IROTH, S_IWOTH, S_IXOTH
-};
-
-#define MODE1 "rwxrwxrwx"
-#define MODE0 "---------"
-#define SMODE1 "..s..s..t"
-#define SMODE0 "..S..S..T"
-
-/*
- * Return the standard ls-like mode string from a file mode.
- * This is static and so is overwritten on each call.
- */
-const char *modeString(int mode)
-{
- static char buf[12];
-
- int i;
-
- buf[0] = TYPECHAR(mode);
- for (i = 0; i < 9; i++) {
- if (mode & SBIT[i])
- buf[i + 1] = (mode & MBIT[i]) ? SMODE1[i] : SMODE0[i];
- else
- buf[i + 1] = (mode & MBIT[i]) ? MODE1[i] : MODE0[i];
- }
- return buf;
-}
-#endif /* BB_TAR || BB_LS */
-
-
-#if defined BB_TAR || defined BB_AR
-/*
- * Return the standard ls-like time string from a time_t
- * This is static and so is overwritten on each call.
- */
-const char *timeString(time_t timeVal)
-{
- time_t now;
- char *str;
- static char buf[26];
-
- time(&now);
-
- str = ctime(&timeVal);
-
- strcpy(buf, &str[4]);
- buf[12] = '\0';
-
- if ((timeVal > now) || (timeVal < now - 365 * 24 * 60 * 60L)) {
- strcpy(&buf[7], &str[20]);
- buf[11] = '\0';
- }
-
- return buf;
-}
-#endif /* BB_TAR || BB_AR */
-
-#if defined BB_TAR || defined BB_CP_MV || defined BB_AR
-/*
- * Write all of the supplied buffer out to a file.
- * This does multiple writes as necessary.
- * Returns the amount written, or -1 on an error.
- */
-int fullWrite(int fd, const char *buf, int len)
-{
- int cc;
- int total;
-
- total = 0;
-
- while (len > 0) {
- cc = write(fd, buf, len);
-
- if (cc < 0)
- return -1;
-
- buf += cc;
- total += cc;
- len -= cc;
- }
-
- return total;
-}
-#endif /* BB_TAR || BB_CP_MV || BB_AR */
-
-
-#if defined BB_TAR || defined BB_TAIL || defined BB_AR || defined BB_SH || defined BB_CP_MV
-/*
- * Read all of the supplied buffer from a file.
- * This does multiple reads as necessary.
- * Returns the amount read, or -1 on an error.
- * A short read is returned on an end of file.
- */
-int fullRead(int fd, char *buf, int len)
-{
- int cc;
- int total;
-
- total = 0;
-
- while (len > 0) {
- cc = read(fd, buf, len);
-
- if (cc < 0)
- return -1;
-
- if (cc == 0)
- break;
-
- buf += cc;
- total += cc;
- len -= cc;
- }
-
- return total;
-}
-#endif /* BB_TAR || BB_TAIL || BB_AR || BB_SH */
-
-
-#if defined (BB_CHMOD_CHOWN_CHGRP) \
- || defined (BB_CP_MV) \
- || defined (BB_FIND) \
- || defined (BB_INSMOD) \
- || defined (BB_LS) \
- || defined (BB_RM) \
- || defined (BB_TAR)
-
-/*
- * Walk down all the directories under the specified
- * location, and do something (something specified
- * by the fileAction and dirAction function pointers).
- *
- * Unfortunatly, while nftw(3) could replace this and reduce
- * code size a bit, nftw() wasn't supported before GNU libc 2.1,
- * and so isn't sufficiently portable to take over since glibc2.1
- * is so stinking huge.
- */
-int recursiveAction(const char *fileName,
- int recurse, int followLinks, int depthFirst,
- int (*fileAction) (const char *fileName,
- struct stat * statbuf,
- void* userData),
- int (*dirAction) (const char *fileName,
- struct stat * statbuf,
- void* userData),
- void* userData)
-{
- int status;
- struct stat statbuf;
- struct dirent *next;
-
- if (followLinks == TRUE)
- status = stat(fileName, &statbuf);
- else
- status = lstat(fileName, &statbuf);
-
- if (status < 0) {
-#ifdef BB_DEBUG_PRINT_SCAFFOLD
- fprintf(stderr,
- "status=%d followLinks=%d TRUE=%d\n",
- status, followLinks, TRUE);
-#endif
- perror(fileName);
- return FALSE;
- }
-
- if ((followLinks == FALSE) && (S_ISLNK(statbuf.st_mode))) {
- if (fileAction == NULL)
- return TRUE;
- else
- return fileAction(fileName, &statbuf, userData);
- }
-
- if (recurse == FALSE) {
- if (S_ISDIR(statbuf.st_mode)) {
- if (dirAction != NULL)
- return (dirAction(fileName, &statbuf, userData));
- else
- return TRUE;
- }
- }
-
- if (S_ISDIR(statbuf.st_mode)) {
- DIR *dir;
-
- dir = opendir(fileName);
- if (!dir) {
- perror(fileName);
- return FALSE;
- }
- if (dirAction != NULL && depthFirst == FALSE) {
- status = dirAction(fileName, &statbuf, userData);
- if (status == FALSE) {
- perror(fileName);
- return FALSE;
- }
- }
- while ((next = readdir(dir)) != NULL) {
- char nextFile[BUFSIZ + 1];
-
- if ((strcmp(next->d_name, "..") == 0)
- || (strcmp(next->d_name, ".") == 0)) {
- continue;
- }
- if (strlen(fileName) + strlen(next->d_name) + 1 > BUFSIZ) {
- errorMsg("name_too_long");
- return FALSE;
- }
- memset(nextFile, 0, sizeof(nextFile));
- sprintf(nextFile, "%s/%s", fileName, next->d_name);
- status =
- recursiveAction(nextFile, TRUE, followLinks, depthFirst,
- fileAction, dirAction, userData);
- if (status == FALSE) {
- closedir(dir);
- return FALSE;
- }
- }
- status = closedir(dir);
- if (status < 0) {
- perror(fileName);
- return FALSE;
- }
- if (dirAction != NULL && depthFirst == TRUE) {
- status = dirAction(fileName, &statbuf, userData);
- if (status == FALSE) {
- perror(fileName);
- return FALSE;
- }
- }
- } else {
- if (fileAction == NULL)
- return TRUE;
- else
- return fileAction(fileName, &statbuf, userData);
- }
- return TRUE;
-}
-
-#endif /* BB_CHMOD_CHOWN_CHGRP || BB_CP_MV || BB_FIND || BB_LS || BB_INSMOD */
-
-
-
-#if defined (BB_TAR) || defined (BB_MKDIR) || defined (BB_AR)
-/*
- * Attempt to create the directories along the specified path, except for
- * the final component. The mode is given for the final directory only,
- * while all previous ones get default protections. Errors are not reported
- * here, as failures to restore files can be reported later.
- */
-extern int createPath(const char *name, int mode)
-{
- char *cp;
- char *cpOld;
- char buf[BUFSIZ + 1];
- int retVal = 0;
-
- strcpy(buf, name);
- for (cp = buf; *cp == '/'; cp++);
- cp = strchr(cp, '/');
- while (cp) {
- cpOld = cp;
- cp = strchr(cp + 1, '/');
- *cpOld = '\0';
- retVal = mkdir(buf, cp ? 0777 : mode);
- if (retVal != 0 && errno != EEXIST) {
- perror(buf);
- return FALSE;
- }
- *cpOld = '/';
- }
- return TRUE;
-}
-#endif /* BB_TAR || BB_MKDIR */
-
-
-
-#if defined (BB_CHMOD_CHOWN_CHGRP) || defined (BB_MKDIR) \
- || defined (BB_MKFIFO) || defined (BB_MKNOD) || defined (BB_AR)
-/* [ugoa]{+|-|=}[rwxst] */
-
-
-
-extern int parse_mode(const char *s, mode_t * theMode)
-{
- mode_t andMode =
-
- S_ISVTX | S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO;
- mode_t orMode = 0;
- mode_t mode = 0;
- mode_t groups = 0;
- char type;
- char c;
-
- if (s==NULL)
- return (FALSE);
-
- do {
- for (;;) {
- switch (c = *s++) {
- case '\0':
- return -1;
- case 'u':
- groups |= S_ISUID | S_IRWXU;
- continue;
- case 'g':
- groups |= S_ISGID | S_IRWXG;
- continue;
- case 'o':
- groups |= S_IRWXO;
- continue;
- case 'a':
- groups |= S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO;
- continue;
- case '+':
- case '=':
- case '-':
- type = c;
- if (groups == 0) /* The default is "all" */
- groups |=
- S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO;
- break;
- default:
- if (isdigit(c) && c >= '0' && c <= '7' &&
- mode == 0 && groups == 0) {
- *theMode = strtol(--s, NULL, 8);
- return (TRUE);
- } else
- return (FALSE);
- }
- break;
- }
-
- while ((c = *s++) != '\0') {
- switch (c) {
- case ',':
- break;
- case 'r':
- mode |= S_IRUSR | S_IRGRP | S_IROTH;
- continue;
- case 'w':
- mode |= S_IWUSR | S_IWGRP | S_IWOTH;
- continue;
- case 'x':
- mode |= S_IXUSR | S_IXGRP | S_IXOTH;
- continue;
- case 's':
- mode |= S_IXGRP | S_ISUID | S_ISGID;
- continue;
- case 't':
- mode |= 0;
- continue;
- default:
- *theMode &= andMode;
- *theMode |= orMode;
- return (TRUE);
- }
- break;
- }
- switch (type) {
- case '=':
- andMode &= ~(groups);
- /* fall through */
- case '+':
- orMode |= mode & groups;
- break;
- case '-':
- andMode &= ~(mode & groups);
- orMode &= andMode;
- break;
- }
- } while (c == ',');
- *theMode &= andMode;
- *theMode |= orMode;
- return (TRUE);
-}
-
-
-#endif
-/* BB_CHMOD_CHOWN_CHGRP || BB_MKDIR || BB_MKFIFO || BB_MKNOD */
-
-
-
-
-
-#if defined BB_CHMOD_CHOWN_CHGRP || defined BB_PS || defined BB_LS \
- || defined BB_TAR || defined BB_ID || defined BB_LOGGER \
- || defined BB_LOGNAME || defined BB_WHOAMI
-
-/* This parses entries in /etc/passwd and /etc/group. This is desirable
- * for BusyBox, since we want to avoid using the glibc NSS stuff, which
- * increases target size and is often not needed or wanted for embedded
- * systems.
- *
- * /etc/passwd entries look like this:
- * root:x:0:0:root:/root:/bin/bash
- * and /etc/group entries look like this:
- * root:x:0:
- *
- * This uses buf as storage to hold things.
- *
- */
-unsigned long my_getid(const char *filename, char *name, long id, long *gid)
-{
- FILE *file;
- char *rname, *start, *end, buf[128];
- long rid;
- long rgid = 0;
-
- file = fopen(filename, "r");
- if (file == NULL) {
- /* Do not complain. It is ok for /etc/passwd and
- * friends to be missing... */
- return (-1);
- }
-
- while (fgets(buf, 128, file) != NULL) {
- if (buf[0] == '#')
- continue;
-
- /* username/group name */
- start = buf;
- end = strchr(start, ':');
- if (end == NULL)
- continue;
- *end = '\0';
- rname = start;
-
- /* password */
- start = end + 1;
- end = strchr(start, ':');
- if (end == NULL)
- continue;
-
- /* uid in passwd, gid in group */
- start = end + 1;
- rid = (unsigned long) strtol(start, &end, 10);
- if (end == start)
- continue;
-
- /* gid in passwd */
- start = end + 1;
- rgid = (unsigned long) strtol(start, &end, 10);
-
- if (name) {
- if (0 == strcmp(rname, name)) {
- if (gid) *gid = rgid;
- fclose(file);
- return (rid);
- }
- }
- if (id != -1 && id == rid) {
- strncpy(name, rname, 8);
- if (gid) *gid = rgid;
- fclose(file);
- return (TRUE);
- }
- }
- fclose(file);
- return (-1);
-}
-
-/* returns a uid given a username */
-long my_getpwnam(char *name)
-{
- return my_getid("/etc/passwd", name, -1, NULL);
-}
-
-/* returns a gid given a group name */
-long my_getgrnam(char *name)
-{
- return my_getid("/etc/group", name, -1, NULL);
-}
-
-/* gets a username given a uid */
-void my_getpwuid(char *name, long uid)
-{
- my_getid("/etc/passwd", name, uid, NULL);
-}
-
-/* gets a groupname given a gid */
-void my_getgrgid(char *group, long gid)
-{
- my_getid("/etc/group", group, gid, NULL);
-}
-
-/* gets a gid given a user name */
-long my_getpwnamegid(char *name)
-{
- long gid;
- my_getid("/etc/passwd", name, -1, &gid);
- return gid;
-}
-
-#endif
- /* BB_CHMOD_CHOWN_CHGRP || BB_PS || BB_LS || BB_TAR \
- || BB_ID || BB_LOGGER || BB_LOGNAME || BB_WHOAMI */
-
-
-#if (defined BB_CHVT) || (defined BB_DEALLOCVT) || (defined BB_SETKEYCODES)
-
-/* From <linux/kd.h> */
-#define KDGKBTYPE 0x4B33 /* get keyboard type */
-#define KB_84 0x01
-#define KB_101 0x02 /* this is what we always answer */
-
-int is_a_console(int fd)
-{
- char arg;
-
- arg = 0;
- return (ioctl(fd, KDGKBTYPE, &arg) == 0
- && ((arg == KB_101) || (arg == KB_84)));
-}
-
-static int open_a_console(char *fnam)
-{
- int fd;
-
- /* try read-only */
- fd = open(fnam, O_RDWR);
-
- /* if failed, try read-only */
- if (fd < 0 && errno == EACCES)
- fd = open(fnam, O_RDONLY);
-
- /* if failed, try write-only */
- if (fd < 0 && errno == EACCES)
- fd = open(fnam, O_WRONLY);
-
- /* if failed, fail */
- if (fd < 0)
- return -1;
-
- /* if not a console, fail */
- if (!is_a_console(fd)) {
- close(fd);
- return -1;
- }
-
- /* success */
- return fd;
-}
-
-/*
- * Get an fd for use with kbd/console ioctls.
- * We try several things because opening /dev/console will fail
- * if someone else used X (which does a chown on /dev/console).
- *
- * if tty_name is non-NULL, try this one instead.
- */
-
-int get_console_fd(char *tty_name)
-{
- int fd;
-
- if (tty_name) {
- if (-1 == (fd = open_a_console(tty_name)))
- return -1;
- else
- return fd;
- }
-
- fd = open_a_console("/dev/tty");
- if (fd >= 0)
- return fd;
-
- fd = open_a_console("/dev/tty0");
- if (fd >= 0)
- return fd;
-
- fd = open_a_console("/dev/console");
- if (fd >= 0)
- return fd;
-
- for (fd = 0; fd < 3; fd++)
- if (is_a_console(fd))
- return fd;
-
- errorMsg("Couldnt get a file descriptor referring to the console\n");
- return -1; /* total failure */
-}
-
-
-#endif /* BB_CHVT || BB_DEALLOCVT || BB_SETKEYCODES */
-
-
-#if defined BB_FIND || defined BB_INSMOD
-/*
- * Routine to see if a text string is matched by a wildcard pattern.
- * Returns TRUE if the text is matched, or FALSE if it is not matched
- * or if the pattern is invalid.
- * * matches zero or more characters
- * ? matches a single character
- * [abc] matches 'a', 'b' or 'c'
- * \c quotes character c
- * Adapted from code written by Ingo Wilken, and
- * then taken from sash, Copyright (c) 1999 by David I. Bell
- * Permission is granted to use, distribute, or modify this source,
- * provided that this copyright notice remains intact.
- * Permission to distribute this code under the GPL has been granted.
- */
-extern int check_wildcard_match(const char *text, const char *pattern)
-{
- const char *retryPat;
- const char *retryText;
- int ch;
- int found;
- int len;
-
- retryPat = NULL;
- retryText = NULL;
-
- while (*text || *pattern) {
- ch = *pattern++;
-
- switch (ch) {
- case '*':
- retryPat = pattern;
- retryText = text;
- break;
-
- case '[':
- found = FALSE;
-
- while ((ch = *pattern++) != ']') {
- if (ch == '\\')
- ch = *pattern++;
-
- if (ch == '\0')
- return FALSE;
-
- if (*text == ch)
- found = TRUE;
- }
- len=strlen(text);
- if (found == FALSE && len!=0) {
- return FALSE;
- }
- if (found == TRUE) {
- if (strlen(pattern)==0 && len==1) {
- return TRUE;
- }
- if (len!=0) {
- text++;
- continue;
- }
- }
-
- /* fall into next case */
-
- case '?':
- if (*text++ == '\0')
- return FALSE;
-
- break;
-
- case '\\':
- ch = *pattern++;
-
- if (ch == '\0')
- return FALSE;
-
- /* fall into next case */
-
- default:
- if (*text == ch) {
- if (*text)
- text++;
- break;
- }
-
- if (*text) {
- pattern = retryPat;
- text = ++retryText;
- break;
- }
-
- return FALSE;
- }
-
- if (pattern == NULL)
- return FALSE;
- }
-
- return TRUE;
-}
-#endif /* BB_FIND || BB_INSMOD */
-
-
-
-
-#if defined BB_DF || defined BB_MTAB
-/*
- * Given a block device, find the mount table entry if that block device
- * is mounted.
- *
- * Given any other file (or directory), find the mount table entry for its
- * filesystem.
- */
-extern struct mntent *findMountPoint(const char *name, const char *table)
-{
- struct stat s;
- dev_t mountDevice;
- FILE *mountTable;
- struct mntent *mountEntry;
-
- if (stat(name, &s) != 0)
- return 0;
-
- if ((s.st_mode & S_IFMT) == S_IFBLK)
- mountDevice = s.st_rdev;
- else
- mountDevice = s.st_dev;
-
-
- if ((mountTable = setmntent(table, "r")) == 0)
- return 0;
-
- while ((mountEntry = getmntent(mountTable)) != 0) {
- if (strcmp(name, mountEntry->mnt_dir) == 0
- || strcmp(name, mountEntry->mnt_fsname) == 0) /* String match. */
- break;
- if (stat(mountEntry->mnt_fsname, &s) == 0 && s.st_rdev == mountDevice) /* Match the device. */
- break;
- if (stat(mountEntry->mnt_dir, &s) == 0 && s.st_dev == mountDevice) /* Match the directory's mount point. */
- break;
- }
- endmntent(mountTable);
- return mountEntry;
-}
-#endif /* BB_DF || BB_MTAB */
-
-
-
-#if defined BB_DD || defined BB_TAIL
-/*
- * Read a number with a possible multiplier.
- * Returns -1 if the number format is illegal.
- */
-extern long getNum(const char *cp)
-{
- long value;
-
- if (!isDecimal(*cp))
- return -1;
-
- value = 0;
-
- while (isDecimal(*cp))
- value = value * 10 + *cp++ - '0';
-
- switch (*cp++) {
- case 'M':
- case 'm': /* `tail' uses it traditionally */
- value *= 1048576;
- break;
-
- case 'k':
- value *= 1024;
- break;
-
- case 'b':
- value *= 512;
- break;
-
- case 'w':
- value *= 2;
- break;
-
- case '\0':
- return value;
-
- default:
- return -1;
- }
-
- if (*cp)
- return -1;
-
- return value;
-}
-#endif /* BB_DD || BB_TAIL */
-
-
-#if defined BB_INIT || defined BB_SYSLOGD
-/* try to open up the specified device */
-extern int device_open(char *device, int mode)
-{
- int m, f, fd = -1;
-
- m = mode | O_NONBLOCK;
-
- /* Retry up to 5 times */
- for (f = 0; f < 5; f++)
- if ((fd = open(device, m, 0600)) >= 0)
- break;
- if (fd < 0)
- return fd;
- /* Reset original flags. */
- if (m != mode)
- fcntl(fd, F_SETFL, mode);
- return fd;
-}
-#endif /* BB_INIT BB_SYSLOGD */
-
-
-#if defined BB_KILLALL || ( defined BB_FEATURE_LINUXRC && ( defined BB_HALT || defined BB_REBOOT || defined BB_POWEROFF ))
-#ifdef BB_FEATURE_USE_DEVPS_PATCH
-#include <linux/devps.h> /* For Erik's nifty devps device driver */
-#endif
-
-#if defined BB_FEATURE_USE_DEVPS_PATCH
-/* findPidByName()
- *
- * This finds the pid of the specified process,
- * by using the /dev/ps device driver.
- *
- * Returns a list of all matching PIDs
- */
-extern pid_t* findPidByName( char* pidName)
-{
- int fd, i, j;
- char device[] = "/dev/ps";
- pid_t num_pids;
- pid_t* pid_array = NULL;
- pid_t* pidList=NULL;
-
- /* open device */
- fd = open(device, O_RDONLY);
- if (fd < 0)
- fatalError( "open failed for `%s': %s\n", device, strerror (errno));
-
- /* Find out how many processes there are */
- if (ioctl (fd, DEVPS_GET_NUM_PIDS, &num_pids)<0)
- fatalError( "\nDEVPS_GET_PID_LIST: %s\n", strerror (errno));
-
- /* Allocate some memory -- grab a few extras just in case
- * some new processes start up while we wait. The kernel will
- * just ignore any extras if we give it too many, and will trunc.
- * the list if we give it too few. */
- pid_array = (pid_t*) xcalloc( num_pids+10, sizeof(pid_t));
- pid_array[0] = num_pids+10;
-
- /* Now grab the pid list */
- if (ioctl (fd, DEVPS_GET_PID_LIST, pid_array)<0)
- fatalError( "\nDEVPS_GET_PID_LIST: %s\n", strerror (errno));
-
- /* Now search for a match */
- for (i=1, j=0; i<pid_array[0] ; i++) {
- char* p;
- struct pid_info info;
-
- info.pid = pid_array[i];
- if (ioctl (fd, DEVPS_GET_PID_INFO, &info)<0)
- fatalError( "\nDEVPS_GET_PID_INFO: %s\n", strerror (errno));
-
- /* Make sure we only match on the process name */
- p=info.command_line+1;
- while ((*p != 0) && !isspace(*(p)) && (*(p-1) != '\\')) {
- (p)++;
- }
- if (isspace(*(p)))
- *p='\0';
-
- if ((strstr(info.command_line, pidName) != NULL)
- && (strlen(pidName) == strlen(info.command_line))) {
- pidList=xrealloc( pidList, sizeof(pid_t) * (j+2));
- pidList[j++]=info.pid;
- }
- }
- if (pidList)
- pidList[j]=0;
-
- /* Free memory */
- free( pid_array);
-
- /* close device */
- if (close (fd) != 0)
- fatalError( "close failed for `%s': %s\n",device, strerror (errno));
-
- return pidList;
-}
-#else /* BB_FEATURE_USE_DEVPS_PATCH */
-#if ! defined BB_FEATURE_USE_PROCFS
-#error Sorry, I depend on the /proc filesystem right now.
-#endif
-
-/* findPidByName()
- *
- * This finds the pid of the specified process.
- * Currently, it's implemented by rummaging through
- * the proc filesystem.
- *
- * Returns a list of all matching PIDs
- */
-extern pid_t* findPidByName( char* pidName)
-{
- DIR *dir;
- struct dirent *next;
- pid_t* pidList=NULL;
- int i=0;
-
- dir = opendir("/proc");
- if (!dir)
- fatalError( "Cannot open /proc: %s\n", strerror (errno));
-
- while ((next = readdir(dir)) != NULL) {
- FILE *status;
- char filename[256];
- char buffer[256];
-
- /* If it isn't a number, we don't want it */
- if (!isdigit(*next->d_name))
- continue;
-
- sprintf(filename, "/proc/%s/cmdline", next->d_name);
- status = fopen(filename, "r");
- if (!status) {
- continue;
- }
- fgets(buffer, 256, status);
- fclose(status);
-
- if (strstr(get_last_path_component(buffer), pidName) != NULL) {
- pidList=xrealloc( pidList, sizeof(pid_t) * (i+2));
- pidList[i++]=strtol(next->d_name, NULL, 0);
- }
- }
-
- if (pidList)
- pidList[i]=0;
- return pidList;
-}
-#endif /* BB_FEATURE_USE_DEVPS_PATCH */
-#endif /* BB_KILLALL || ( BB_FEATURE_LINUXRC && ( BB_HALT || BB_REBOOT || BB_POWEROFF )) */
-
-#ifndef DMALLOC
-/* this should really be farmed out to libbusybox.a */
-extern void *xmalloc(size_t size)
-{
- void *ptr = malloc(size);
-
- if (!ptr)
- fatalError("memory_exhausted");
- return ptr;
-}
-
-extern void *xrealloc(void *old, size_t size)
-{
- void *ptr;
- if (!size)
- size = 1;
- ptr = realloc(old, size);
- if (!ptr)
- fatalError("memory_exhausted");
- return ptr;
-}
-
-extern void *xcalloc(size_t nmemb, size_t size)
-{
- void *ptr = calloc(nmemb, size);
- if (!ptr)
- fatalError("memory_exhausted");
- return ptr;
-}
-#endif
-
-#if defined BB_FEATURE_NFSMOUNT || defined BB_SH || defined BB_LS
-# ifndef DMALLOC
-extern char * xstrdup (const char *s) {
- char *t;
-
- if (s == NULL)
- return NULL;
-
- t = strdup (s);
-
- if (t == NULL)
- fatalError("memory_exhausted");
-
- return t;
-}
-# endif
-#endif
-
-#if defined BB_FEATURE_NFSMOUNT
-extern char * xstrndup (const char *s, int n) {
- char *t;
-
- if (s == NULL)
- fatalError("xstrndup bug");
-
- t = xmalloc(n+1);
- strncpy(t,s,n);
- t[n] = 0;
-
- return t;
-}
-#endif
-
-
-#if (__GLIBC__ < 2) && (defined BB_SYSLOGD || defined BB_INIT)
-extern int vdprintf(int d, const char *format, va_list ap)
-{
- char buf[BUF_SIZE];
- int len;
-
- len = vsprintf(buf, format, ap);
- return write(d, buf, len);
-}
-#endif /* BB_SYSLOGD */
-
-
-#if defined BB_FEATURE_MOUNT_LOOP
-#include <fcntl.h>
-#include "loop.h" /* Pull in loop device support */
-
-extern int del_loop(const char *device)
-{
- int fd;
-
- if ((fd = open(device, O_RDONLY)) < 0) {
- perror(device);
- return (FALSE);
- }
- if (ioctl(fd, LOOP_CLR_FD, 0) < 0) {
- perror("ioctl: LOOP_CLR_FD");
- return (FALSE);
- }
- close(fd);
- return (TRUE);
-}
-
-extern int set_loop(const char *device, const char *file, int offset,
- int *loopro)
-{
- struct loop_info loopinfo;
- int fd, ffd, mode;
-
- mode = *loopro ? O_RDONLY : O_RDWR;
- if ((ffd = open(file, mode)) < 0 && !*loopro
- && (errno != EROFS || (ffd = open(file, mode = O_RDONLY)) < 0)) {
- perror(file);
- return 1;
- }
- if ((fd = open(device, mode)) < 0) {
- close(ffd);
- perror(device);
- return 1;
- }
- *loopro = (mode == O_RDONLY);
-
- memset(&loopinfo, 0, sizeof(loopinfo));
- strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
- loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
-
- loopinfo.lo_offset = offset;
-
- loopinfo.lo_encrypt_key_size = 0;
- if (ioctl(fd, LOOP_SET_FD, ffd) < 0) {
- perror("ioctl: LOOP_SET_FD");
- close(fd);
- close(ffd);
- return 1;
- }
- if (ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
- (void) ioctl(fd, LOOP_CLR_FD, 0);
- perror("ioctl: LOOP_SET_STATUS");
- close(fd);
- close(ffd);
- return 1;
- }
- close(fd);
- close(ffd);
- return 0;
-}
-
-extern char *find_unused_loop_device(void)
-{
- char dev[20];
- int i, fd;
- struct stat statbuf;
- struct loop_info loopinfo;
-
- for (i = 0; i <= 7; i++) {
- sprintf(dev, "/dev/loop%d", i);
- if (stat(dev, &statbuf) == 0 && S_ISBLK(statbuf.st_mode)) {
- if ((fd = open(dev, O_RDONLY)) >= 0) {
- if (ioctl(fd, LOOP_GET_STATUS, &loopinfo) == -1) {
- if (errno == ENXIO) { /* probably free */
- close(fd);
- return strdup(dev);
- }
- }
- close(fd);
- }
- }
- }
- return NULL;
-}
-#endif /* BB_FEATURE_MOUNT_LOOP */
-
-#if defined BB_MOUNT || defined BB_DF || ( defined BB_UMOUNT && ! defined BB_MTAB)
-extern int find_real_root_device_name(char* name)
-{
- DIR *dir;
- struct dirent *entry;
- struct stat statBuf, rootStat;
- char fileName[BUFSIZ];
-
- if (stat("/", &rootStat) != 0) {
- errorMsg("could not stat '/'\n");
- return( FALSE);
- }
-
- dir = opendir("/dev");
- if (!dir) {
- errorMsg("could not open '/dev'\n");
- return( FALSE);
- }
-
- while((entry = readdir(dir)) != NULL) {
-
- /* Must skip ".." since that is "/", and so we
- * would get a false positive on ".." */
- if (strcmp(entry->d_name, "..") == 0)
- continue;
-
- snprintf( fileName, strlen(name)+1, "/dev/%s", entry->d_name);
-
- if (stat(fileName, &statBuf) != 0)
- continue;
- /* Some char devices have the same dev_t as block
- * devices, so make sure this is a block device */
- if (! S_ISBLK(statBuf.st_mode))
- continue;
- if (statBuf.st_rdev == rootStat.st_rdev) {
- strcpy(name, fileName);
- return ( TRUE);
- }
- }
-
- return( FALSE);
-}
-#endif
-
-
-/* get_line_from_file() - This function reads an entire line from a text file
- * up to a newline. It returns a malloc'ed char * which must be stored and
- * free'ed by the caller. */
-extern char *get_line_from_file(FILE *file)
-{
- static const int GROWBY = 80; /* how large we will grow strings by */
-
- int ch;
- int idx = 0;
- char *linebuf = NULL;
- int linebufsz = 0;
-
- while (1) {
- ch = fgetc(file);
- if (ch == EOF)
- break;
- /* grow the line buffer as necessary */
- while (idx > linebufsz-2)
- linebuf = xrealloc(linebuf, linebufsz += GROWBY);
- linebuf[idx++] = (char)ch;
- if ((char)ch == '\n')
- break;
- }
-
- if (idx == 0)
- return NULL;
-
- linebuf[idx] = 0;
- return linebuf;
-}
-
-#if defined BB_CAT
-extern void print_file(FILE *file)
-{
- int c;
-
- while ((c = getc(file)) != EOF)
- putc(c, stdout);
- fclose(file);
- fflush(stdout);
-}
-
-extern int print_file_by_name(char *filename)
-{
- FILE *file;
- file = fopen(filename, "r");
- if (file == NULL) {
- return FALSE;
- }
- print_file(file);
- return TRUE;
-}
-#endif /* BB_CAT || BB_LSMOD */
-
-#if defined BB_ECHO || defined BB_TR
-char process_escape_sequence(char **ptr)
-{
- char c;
-
- switch (c = *(*ptr)++) {
- case 'a':
- c = '\a';
- break;
- case 'b':
- c = '\b';
- break;
- case 'f':
- c = '\f';
- break;
- case 'n':
- c = '\n';
- break;
- case 't':
- c = '\t';
- break;
- case 'v':
- c = '\v';
- break;
- case '\\':
- c = '\\';
- break;
- case '0': case '1': case '2': case '3':
- case '4': case '5': case '6': case '7':
- c -= '0';
- if ('0' <= **ptr && **ptr <= '7') {
- c = c * 8 + (*(*ptr)++ - '0');
- if ('0' <= **ptr && **ptr <= '7')
- c = c * 8 + (*(*ptr)++ - '0');
- }
- break;
- default:
- (*ptr)--;
- c = '\\';
- break;
- }
- return c;
-}
-#endif
-
-#if defined BB_BASENAME || defined BB_LN || defined BB_SH
-char *get_last_path_component(char *path)
-{
- char *s=path+strlen(path)-1;
-
- /* strip trailing slashes */
- while (s && *s == '/') {
- *s-- = '\0';
- }
-
- /* find last component */
- s = strrchr(path, '/');
- if (s==NULL) return path;
- else return s+1;
-}
-#endif
-
-#if defined BB_GREP || defined BB_SED
-void xregcomp(regex_t *preg, const char *regex, int cflags)
-{
- int ret;
- if ((ret = regcomp(preg, regex, cflags)) != 0) {
- int errmsgsz = regerror(ret, preg, NULL, 0);
- char *errmsg = xmalloc(errmsgsz);
- regerror(ret, preg, errmsg, errmsgsz);
- fatalError("bb_regcomp: %s\n", errmsg);
- }
-}
-#endif
-
-/* END CODE */
-/*
-Local Variables:
-c-file-style: "linux"
-c-basic-offset: 4
-tab-width: 4
-End:
-*/
diff --git a/mdk-stage1/insmod-modutils/Makefile b/mdk-stage1/insmod-modutils/Makefile
deleted file mode 100644
index e8f78d2d0..000000000
--- a/mdk-stage1/insmod-modutils/Makefile
+++ /dev/null
@@ -1,63 +0,0 @@
- #******************************************************************************
- #
- # insmod from modutils (generic)
- #
- # $Id$
- #
- # Copyright 1996, 1997 Linux International.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-INCS = -I./include
-
-DEFS = -Wno-error -D_GNU_SOURCE -DELF_MACHINE_H='"elf_$(ARCH).h"' -DARCH_$(ARCH)
-
-
-DIRS = util obj
-
-all: dirs insmod libinsmod.a #libinsmod-DIET.a
-
-dirs:
- @for n in . $(DIRS); do \
- [ "$$n" = "." ] || make -C $$n ;\
- done
-
-clean:
- @for n in $(DIRS); do \
- (cd $$n; make clean) \
- done
- rm -rf t *.o insmod libinsmod.a libinsmod-DIET.a
-
-
-insmod: insmod-frontend.o insmod.o ./util/libutil-STANDALONE.a ./obj/libobj.a
- gcc -o $@ $^
- $(STRIPCMD) $@
-
-t/.create_stuff: util/libutil.a obj/libobj.a
- rm -rf t
- mkdir t
- cd t && for e in $^; do ar -x ../$$e; done
- touch t/.create_stuff
-
-libinsmod.a: insmod.o t/.create_stuff
- ar cru $@ insmod.o t/*
- ranlib $@
-
-libinsmod-DIET.a: insmod-DIET.o ./util/libutil-DIET.a ./obj/libobj-DIET.a
- ar cru $@ $^
- ranlib $@
-
-insmod-frontend.o: insmod-frontend.c insmod.c
- gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c insmod-frontend.c
-
-insmod.o: insmod.c
- gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c insmod.c
-
-insmod-DIET.o: insmod.c
- gcc $(CFLAGS) $(DEFS) $(INCS) $(DIETLIBC_INCLUDES) -o $@ -c insmod.c
-
diff --git a/mdk-stage1/insmod-modutils/include/config.h b/mdk-stage1/insmod-modutils/include/config.h
deleted file mode 100644
index 11da6a523..000000000
--- a/mdk-stage1/insmod-modutils/include/config.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Configuration file management
- *
- * Copyright 1994, 1995, 1996, 1997:
- * Jacques Gelinas <jack@solucorp.qc.ca>
- * Björn Ekwall <bj0rn@blox.se> February, March 1999
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _CONFIG_H
-#define _CONFIG_H
-
-#include <stdio.h>
-#include <sys/utsname.h>
-
-#define ETC_MODULES_CONF "/etc/modules.conf"
-
-#define EXEC_PRE_INSTALL 0
-#define EXEC_POST_INSTALL 1
-#define EXEC_PRE_REMOVE 2
-#define EXEC_POST_REMOVE 3
-#define EXEC_INSTALL 4
-#define EXEC_REMOVE 5
-
-struct PATH_TYPE {
- char *type;
- char *path;
-};
-
-struct EXEC_TYPE {
- int when;
- char *module;
- char *cmd;
-};
-
-typedef struct {
- char *name;
- GLOB_LIST *opts;
- int autoclean;
-} OPT_LIST;
-
-/* config.c */
-extern int flag_autoclean;
-extern struct utsname uts_info;
-extern char *aliaslist[];
-extern struct PATH_TYPE *modpath;
-extern int nmodpath;
-extern struct EXEC_TYPE *execs;
-extern int nexecs;
-extern char *insmod_opt;
-extern char *config_file;
-extern char *optlist[];
-extern char *prune[];
-extern OPT_LIST *opt_list;
-extern OPT_LIST *abovelist;
-extern OPT_LIST *belowlist;
-extern OPT_LIST *prunelist;
-extern OPT_LIST *probe_list;
-extern OPT_LIST *probeall_list;
-extern OPT_LIST *aliases;
-extern time_t config_mtime;
-extern int root_check_off; /* Check modules are owned by root? */
-
-/* Information about generated files */
-struct gen_files {
- char *base; /* xxx in /lib/modules/`uname -r`/modules.xxx */
- char *name; /* name actually used */
- time_t mtime;
-};
-
-extern struct gen_files gen_file[];
-extern const int gen_file_count;
-/* The enum order must match the gen_file initialization order in config.c */
-enum gen_file_enum {
- GEN_GENERIC_STRINGFILE,
- GEN_PCIMAPFILE,
- GEN_ISAPNPMAPFILE,
- GEN_USBMAPFILE,
- GEN_PARPORTMAPFILE,
- GEN_DEPFILE,
-};
-
-extern char *persistdir;
-
-char *fgets_strip(char *buf, int sizebuf, FILE * fin, int *lineno);
-int config_read(int all, char *force_ver, char *base_dir, char *conf_file);
-GLOB_LIST *config_lstmod(const char *match, const char *type, int first_only);
-char *search_module_path(const char *base);
-
-#endif /* _CONFIG_H */
diff --git a/mdk-stage1/insmod-modutils/include/elf_alpha.h b/mdk-stage1/insmod-modutils/include/elf_alpha.h
deleted file mode 100644
index f1ec66f1c..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_alpha.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for the Alpha. */
-#ident "$Id$"
-
-#define ELFCLASSM ELFCLASS64
-#define ELFDATAM ELFDATA2LSB
-
-#define MATCH_MACHINE(x) (x == EM_ALPHA)
-
-#define SHT_RELM SHT_RELA
-#define Elf64_RelM Elf64_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_arm.h b/mdk-stage1/insmod-modutils/include/elf_arm.h
deleted file mode 100644
index f6b531e88..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_arm.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for ARM. */
-#ident "$Id$"
-
-#define ELFCLASSM ELFCLASS32
-#define ELFDATAM ELFDATA2LSB
-
-#define MATCH_MACHINE(x) (x == EM_ARM)
-
-#define SHT_RELM SHT_REL
-#define Elf32_RelM Elf32_Rel
diff --git a/mdk-stage1/insmod-modutils/include/elf_hppa.h b/mdk-stage1/insmod-modutils/include/elf_hppa.h
deleted file mode 100644
index 9a1bd34ce..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_hppa.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for HP-PA. */
-
-#define ELFCLASSM ELFCLASS32
-#define ELFDATAM ELFDATA2MSB
-
-#define MATCH_MACHINE(x) (x == EM_PARISC)
-
-#define SHT_RELM SHT_RELA
-#define Elf32_RelM Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_hppa64.h b/mdk-stage1/insmod-modutils/include/elf_hppa64.h
deleted file mode 100644
index 05b201aef..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_hppa64.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for HP-PA64. */
-
-#define ELFCLASSM ELFCLASS64
-#define ELFDATAM ELFDATA2MSB
-
-#define MATCH_MACHINE(x) (x == EM_PARISC)
-
-#define SHT_RELM SHT_RELA
-#define Elf64_RelM Elf64_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_i386.h b/mdk-stage1/insmod-modutils/include/elf_i386.h
deleted file mode 100644
index c6c2d326e..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_i386.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for i386 et al. */
-#ident "$Id$"
-
-#define ELFCLASSM ELFCLASS32
-#define ELFDATAM ELFDATA2LSB
-
-#define MATCH_MACHINE(x) (x == EM_386)
-
-#define SHT_RELM SHT_REL
-#define Elf32_RelM Elf32_Rel
diff --git a/mdk-stage1/insmod-modutils/include/elf_ia64.h b/mdk-stage1/insmod-modutils/include/elf_ia64.h
deleted file mode 100644
index b4d902956..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_ia64.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for ia64. */
-
-#define ELFCLASSM ELFCLASS64
-#define ELFDATAM ELFDATA2LSB
-
-#define MATCH_MACHINE(x) (x == EM_IA_64)
-
-#define SHT_RELM SHT_RELA
-#define Elf64_RelM Elf64_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_m68k.h b/mdk-stage1/insmod-modutils/include/elf_m68k.h
deleted file mode 100644
index 817fc8f2c..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_m68k.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for m68k. */
-#ident "$Id$"
-
-#define ELFCLASSM ELFCLASS32
-#define ELFDATAM ELFDATA2MSB
-
-#define MATCH_MACHINE(x) (x == EM_68K)
-
-#define SHT_RELM SHT_RELA
-#define Elf32_RelM Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_mips.h b/mdk-stage1/insmod-modutils/include/elf_mips.h
deleted file mode 100644
index 8a0430216..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_mips.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Machine-specific elf macros for MIPS. */
-#ident "$Id$"
-
-#define ELFCLASSM ELFCLASS32
-#ifdef __MIPSEB__
-#define ELFDATAM ELFDATA2MSB
-#endif
-#ifdef __MIPSEL__
-#define ELFDATAM ELFDATA2LSB
-#endif
-
-/* Account for ELF spec changes. */
-#ifndef EM_MIPS_RS3_LE
-#ifdef EM_MIPS_RS4_BE
-#define EM_MIPS_RS3_LE EM_MIPS_RS4_BE
-#else
-#define EM_MIPS_RS3_LE 10
-#endif
-#endif /* !EM_MIPS_RS3_LE */
-
-#define MATCH_MACHINE(x) (x == EM_MIPS || x == EM_MIPS_RS3_LE)
-
-#define SHT_RELM SHT_REL
-#define Elf32_RelM Elf32_Rel
diff --git a/mdk-stage1/insmod-modutils/include/elf_ppc.h b/mdk-stage1/insmod-modutils/include/elf_ppc.h
deleted file mode 100644
index 71596de8c..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_ppc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for the PowerPC. */
-#ident "$Id$"
-
-#define ELFCLASSM ELFCLASS32
-#define ELFDATAM ELFDATA2MSB
-
-#define MATCH_MACHINE(x) (x == EM_PPC)
-
-#define SHT_RELM SHT_RELA
-#define Elf32_RelM Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_s390.h b/mdk-stage1/insmod-modutils/include/elf_s390.h
deleted file mode 100644
index 547d66b83..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_s390.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for i386 et al. */
-#ident "$Id$"
-
-#define ELFCLASSM ELFCLASS32
-#define ELFDATAM ELFDATA2MSB
-
-#define MATCH_MACHINE(x) (x == EM_S390)
-
-#define SHT_RELM SHT_RELA
-#define Elf32_RelM Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_sparc.h b/mdk-stage1/insmod-modutils/include/elf_sparc.h
deleted file mode 100644
index 9b5c348d9..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_sparc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* Machine-specific elf macros for the Sparc. */
-#ident "$Id$"
-
-#define ELFCLASSM ELFCLASS32
-#define ELFDATAM ELFDATA2MSB
-
-#define MATCH_MACHINE(x) (x == EM_SPARC)
-
-#define SHT_RELM SHT_RELA
-#define Elf32_RelM Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_sparc64.h b/mdk-stage1/insmod-modutils/include/elf_sparc64.h
deleted file mode 100644
index 158edd7e1..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_sparc64.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Machine-specific elf macros for the Sparc. */
-#ident "$Id$"
-
-#define ELFCLASSM ELFCLASS64
-#define ELFDATAM ELFDATA2MSB
-
-#ifndef EM_SPARCV9
-#define EM_SPARCV9 43
-#endif
-#ifndef EM_SPARC64
-#define EM_SPARC64 11
-#endif
-#define MATCH_MACHINE(x) ((x) == EM_SPARCV9 || (x) == EM_SPARC64)
-
-#define SHT_RELM SHT_RELA
-#define Elf64_RelM Elf64_Rela
-
-#ifndef ELF64_R_SYM
-#define ELF64_R_SYM(x) ((x) >> 32)
-#define ELF64_R_TYPE(x) ((unsigned)(x))
-#endif
-
-#ifndef ELF64_ST_BIND
-#define ELF64_ST_BIND(x) ((x) >> 4)
-#define ELF64_ST_TYPE(x) ((x) & 0xf)
-#endif
-
diff --git a/mdk-stage1/insmod-modutils/include/kallsyms.h b/mdk-stage1/insmod-modutils/include/kallsyms.h
deleted file mode 100644
index 9748873cf..000000000
--- a/mdk-stage1/insmod-modutils/include/kallsyms.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* kallsyms headers
- Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
- This file is part of the Linux modutils. It is exported to kernel
- space so debuggers can access the kallsyms data.
-
- The kallsyms data contains all the non-stack symbols from a kernel
- or a module. The kernel symbols are held between __start___kallsyms
- and __stop___kallsyms. The symbols for a module are accessed via
- the struct module chain which is based at module_list.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ident "$Id$"
-
-#ifndef MODUTILS_KALLSYMS_H
-#define MODUTILS_KALLSYMS_H 1
-
-/* Have to (re)define these ElfW entries here because external kallsyms
- * code does not have access to modutils/include/obj.h. This code is
- * included from user spaces tools (modutils) and kernel, they need
- * different includes.
- */
-
-#ifndef ELFCLASS32
-#ifdef __KERNEL__
-#include <linux/elf.h>
-#else /* __KERNEL__ */
-#include <elf.h>
-#endif /* __KERNEL__ */
-#endif /* ELFCLASS32 */
-
-#ifndef ELFCLASSM
-#define ELFCLASSM ELF_CLASS
-#endif
-
-#ifndef ElfW
-# if ELFCLASSM == ELFCLASS32
-# define ElfW(x) Elf32_ ## x
-# define ELFW(x) ELF32_ ## x
-# else
-# define ElfW(x) Elf64_ ## x
-# define ELFW(x) ELF64_ ## x
-# endif
-#endif
-
-/* Format of data in the kallsyms section.
- * Most of the fields are small numbers but the total size and all
- * offsets can be large so use the 32/64 bit types for these fields.
- *
- * Do not use sizeof() on these structures, modutils may be using extra
- * fields. Instead use the size fields in the header to access the
- * other bits of data.
- */
-
-struct kallsyms_header {
- int size; /* Size of this header */
- ElfW(Word) total_size; /* Total size of kallsyms data */
- int sections; /* Number of section entries */
- ElfW(Off) section_off; /* Offset to first section entry */
- int section_size; /* Size of one section entry */
- int symbols; /* Number of symbol entries */
- ElfW(Off) symbol_off; /* Offset to first symbol entry */
- int symbol_size; /* Size of one symbol entry */
- ElfW(Off) string_off; /* Offset to first string */
- ElfW(Addr) start; /* Start address of first section */
- ElfW(Addr) end; /* End address of last section */
-};
-
-struct kallsyms_section {
- ElfW(Addr) start; /* Start address of section */
- ElfW(Word) size; /* Size of this section */
- ElfW(Off) name_off; /* Offset to section name */
- ElfW(Word) flags; /* Flags from section */
-};
-
-struct kallsyms_symbol {
- ElfW(Off) section_off; /* Offset to section that owns this symbol */
- ElfW(Addr) symbol_addr; /* Address of symbol */
- ElfW(Off) name_off; /* Offset to symbol name */
-};
-
-#define KALLSYMS_SEC_NAME "__kallsyms"
-#define KALLSYMS_IDX 2 /* obj_kallsyms creates kallsyms as section 2 */
-
-#define kallsyms_next_sec(h,s) \
- ((s) = (struct kallsyms_section *)((char *)(s) + (h)->section_size))
-#define kallsyms_next_sym(h,s) \
- ((s) = (struct kallsyms_symbol *)((char *)(s) + (h)->symbol_size))
-
-int kallsyms_symbol_to_address(
- const char *name, /* Name to lookup */
- unsigned long *token, /* Which module to start with */
- const char **mod_name, /* Set to module name or "kernel" */
- unsigned long *mod_start, /* Set to start address of module */
- unsigned long *mod_end, /* Set to end address of module */
- const char **sec_name, /* Set to section name */
- unsigned long *sec_start, /* Set to start address of section */
- unsigned long *sec_end, /* Set to end address of section */
- const char **sym_name, /* Set to full symbol name */
- unsigned long *sym_start, /* Set to start address of symbol */
- unsigned long *sym_end /* Set to end address of symbol */
- );
-
-int kallsyms_address_to_symbol(
- unsigned long address, /* Address to lookup */
- const char **mod_name, /* Set to module name */
- unsigned long *mod_start, /* Set to start address of module */
- unsigned long *mod_end, /* Set to end address of module */
- const char **sec_name, /* Set to section name */
- unsigned long *sec_start, /* Set to start address of section */
- unsigned long *sec_end, /* Set to end address of section */
- const char **sym_name, /* Set to full symbol name */
- unsigned long *sym_start, /* Set to start address of symbol */
- unsigned long *sym_end /* Set to end address of symbol */
- );
-
-#endif /* kallsyms.h */
diff --git a/mdk-stage1/insmod-modutils/include/kerneld.h b/mdk-stage1/insmod-modutils/include/kerneld.h
deleted file mode 100644
index 3bc2c9d42..000000000
--- a/mdk-stage1/insmod-modutils/include/kerneld.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* Definitions for the Linux kerneld SYSV IPC interface.
- This file was part of the Linux kernel, and so is covered by the GPL. */
-
-#ifndef MODUTILS_KERNELD_H
-#define MODUTILS_KERNELD_H
-
-#ident "$Id$"
-
-#define KERNELD_SYSTEM 1
-#define KERNELD_REQUEST_MODULE 2 /* "insmod" */
-#define KERNELD_RELEASE_MODULE 3 /* "rmmod" */
-#define KERNELD_DELAYED_RELEASE_MODULE 4 /* "rmmod" */
-#define KERNELD_CANCEL_RELEASE_MODULE 5 /* "rmmod" */
-#define KERNELD_REQUEST_ROUTE 6 /* net/ipv4/route.c */
-#define KERNELD_BLANKER 7 /* drivers/char/console.c */
-#define KERNELD_PNP 8 /* drivers/pnp/kerneld.c */
-#define KERNELD_ARP 256 /* net/ipv4/arp.c */
-
-#ifdef NEW_KERNELD_PROTOCOL
-# define OLDIPC_KERNELD 00040000 /* old kerneld message channel */
-# define IPC_KERNELD 00140000 /* new kerneld message channel */
-# define KDHDR (sizeof(long) + sizeof(short) + sizeof(short))
-# define NULL_KDHDR 0, 2, 0
-#else /* NEW_KERNELD_PROTOCOL */
-# define IPC_KERNELD 00040000
-# define KDHDR (sizeof(long))
-# define NULL_KDHDR 0
-#endif /* NEW_KERNELD_PROTOCOL */
-
-#define KERNELD_MAXCMD 0x7ffeffff
-#define KERNELD_MINSEQ 0x7fff0000 /* "commands" legal up to 0x7ffeffff */
-#define KERNELD_WAIT 0x80000000
-#define KERNELD_NOWAIT 0
-
-struct kerneld_msg
- {
- long mtype;
- long id;
-#ifdef NEW_KERNELD_PROTOCOL
- short version;
- short pid;
-#endif /* NEW_KERNELD_PROTOCOL */
- char text[1];
- };
-
-#endif /* kerneld.h */
diff --git a/mdk-stage1/insmod-modutils/include/modstat.h b/mdk-stage1/insmod-modutils/include/modstat.h
deleted file mode 100644
index b8a58eeae..000000000
--- a/mdk-stage1/insmod-modutils/include/modstat.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * For kernel module status and information
- *
- * Add module_name_list and l_module_name_list.
- * Keith Owens <kaos@ocs.com.au> November 1999.
- * Björn Ekwall <bj0rn@blox.se> February 1999.
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#ifndef _KERNEL_H
-#define _KERNEL_H
-
-#define K_SYMBOLS 1 /* Want info about symbols */
-#define K_INFO 2 /* Want extended module info */
-#define K_REFS 4 /* Want info about references */
-
-struct module_stat {
- char *name;
- unsigned long addr;
- unsigned long modstruct; /* COMPAT_2_0! *//* depends on architecture? */
- unsigned long size;
- unsigned long flags;
- long usecount;
- size_t nsyms;
- struct module_symbol *syms;
- size_t nrefs;
- struct module_stat **refs;
- unsigned long status;
-};
-
-extern struct module_stat *module_stat;
-extern size_t n_module_stat;
-extern char *module_name_list;
-extern size_t l_module_name_list;
-extern struct module_symbol *ksyms;
-extern size_t nksyms;
-extern int k_new_syscalls;
-
-int get_kernel_info(int type);
-
-#endif /* _KERNEL_H */
diff --git a/mdk-stage1/insmod-modutils/include/module.h b/mdk-stage1/insmod-modutils/include/module.h
deleted file mode 100644
index db49ab2b2..000000000
--- a/mdk-stage1/insmod-modutils/include/module.h
+++ /dev/null
@@ -1,210 +0,0 @@
-/* Definitions for the Linux module syscall interface.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-
-#ifndef MODUTILS_MODULE_H
-#define MODUTILS_MODULE_H 1
-
-#ident "$Id$"
-
-/* This file contains the structures used by the 2.0 and 2.1 kernels.
- We do not use the kernel headers directly because we do not wish
- to be dependant on a particular kernel version to compile insmod. */
-
-
-/*======================================================================*/
-/* The structures used by Linux 2.0. */
-
-/* The symbol format used by get_kernel_syms(2). */
-struct old_kernel_sym
-{
- unsigned long value;
- char name[60];
-};
-
-struct old_module_ref
-{
- unsigned long module; /* kernel addresses */
- unsigned long next;
-};
-
-struct old_module_symbol
-{
- unsigned long addr;
- unsigned long name;
-};
-
-struct old_symbol_table
-{
- int size; /* total, including string table!!! */
- int n_symbols;
- int n_refs;
- struct old_module_symbol symbol[0]; /* actual size defined by n_symbols */
- struct old_module_ref ref[0]; /* actual size defined by n_refs */
-};
-
-struct old_mod_routines
-{
- unsigned long init;
- unsigned long cleanup;
-};
-
-struct old_module
-{
- unsigned long next;
- unsigned long ref; /* the list of modules that refer to me */
- unsigned long symtab;
- unsigned long name;
- int size; /* size of module in pages */
- unsigned long addr; /* address of module */
- int state;
- unsigned long cleanup; /* cleanup routine */
-};
-
-/* Sent to init_module(2) or'ed into the code size parameter. */
-#define OLD_MOD_AUTOCLEAN 0x40000000 /* big enough, but no sign problems... */
-
-int get_kernel_syms(struct old_kernel_sym *);
-int old_sys_init_module(const char *name, char *code, unsigned codesize,
- struct old_mod_routines *, struct old_symbol_table *);
-
-/*======================================================================*/
-/* For sizeof() which are related to the module platform and not to the
- environment isnmod is running in, use sizeof_xx instead of sizeof(xx). */
-
-#define tgt_sizeof_char sizeof(char)
-#define tgt_sizeof_short sizeof(short)
-#define tgt_sizeof_int sizeof(int)
-#define tgt_sizeof_long sizeof(long)
-#define tgt_sizeof_char_p sizeof(char *)
-#define tgt_sizeof_void_p sizeof(void *)
-#define tgt_long long
-#define tgt_long_fmt "l"
-
-/* This assumes that long long on a 32 bit system is equivalent to long on the
- * equivalent 64 bit system. Also that void and char pointers are 8 bytes on
- * all 64 bit systems. Add per system tweaks if it ever becomes necessary.
- */
-#if defined(COMMON_3264) && defined(ONLY_64)
-#undef tgt_long
-#undef tgt_long_fmt
-#undef tgt_sizeof_long
-#undef tgt_sizeof_char_p
-#undef tgt_sizeof_void_p
-#define tgt_long long long
-#define tgt_long_fmt "ll"
-#define tgt_sizeof_long 8
-#define tgt_sizeof_char_p 8
-#define tgt_sizeof_void_p 8
-#endif
-
-/*======================================================================*/
-/* The structures used in Linux 2.1 onwards. */
-
-/* Note: module_symbol does not use tgt_long intentionally */
-struct module_symbol
-{
- unsigned long value;
- unsigned long name;
-};
-
-struct module_ref
-{
- unsigned tgt_long dep; /* kernel addresses */
- unsigned tgt_long ref;
- unsigned tgt_long next_ref;
-};
-
-struct module
-{
- unsigned tgt_long size_of_struct; /* == sizeof(module) */
- unsigned tgt_long next;
- unsigned tgt_long name;
- unsigned tgt_long size;
-
- tgt_long usecount;
- unsigned tgt_long flags; /* AUTOCLEAN et al */
-
- unsigned nsyms;
- unsigned ndeps;
-
- unsigned tgt_long syms;
- unsigned tgt_long deps;
- unsigned tgt_long refs;
- unsigned tgt_long init;
- unsigned tgt_long cleanup;
- unsigned tgt_long ex_table_start;
- unsigned tgt_long ex_table_end;
-#ifdef __alpha__
- unsigned tgt_long gp;
-#endif
- /* Everything after here is extension. */
- unsigned tgt_long read_start; /* Read data from existing module */
- unsigned tgt_long read_end;
- unsigned tgt_long can_unload;
- unsigned tgt_long runsize;
- unsigned tgt_long kallsyms_start;
- unsigned tgt_long kallsyms_end;
- unsigned tgt_long archdata_start;
- unsigned tgt_long archdata_end;
- unsigned tgt_long kernel_data;
-};
-
-struct module_info
-{
- unsigned long addr;
- unsigned long size;
- unsigned long flags;
- long usecount;
-};
-
-/* Bits of module.flags. */
-#define NEW_MOD_RUNNING 1
-#define NEW_MOD_DELETED 2
-#define NEW_MOD_AUTOCLEAN 4
-#define NEW_MOD_VISITED 8
-#define NEW_MOD_USED_ONCE 16
-#define NEW_MOD_INITIALIZING 64
-
-int sys_init_module(const char *name, const struct module *);
-int query_module(const char *name, int which, void *buf, size_t bufsize,
- size_t *ret);
-
-/* Values for query_module's which. */
-
-#define QM_MODULES 1
-#define QM_DEPS 2
-#define QM_REFS 3
-#define QM_SYMBOLS 4
-#define QM_INFO 5
-
-/*======================================================================*/
-/* The system calls unchanged between 2.0 and 2.1. */
-
-unsigned long create_module(const char *, size_t);
-int delete_module(const char *);
-
-/* In safe mode the last parameter is forced to be a module name and meta
- * expansion is not allowed on that name.
- */
-extern unsigned int safemode;
-
-#endif /* module.h */
diff --git a/mdk-stage1/insmod-modutils/include/obj.h b/mdk-stage1/insmod-modutils/include/obj.h
deleted file mode 100644
index b140c65c3..000000000
--- a/mdk-stage1/insmod-modutils/include/obj.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/* Elf object file loading and relocation routines.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
- obj_free() added by Björn Ekwall <bj0rn@blox.se> March 1999
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-
-#ifndef MODUTILS_OBJ_H
-#define MODUTILS_OBJ_H 1
-
-#ident "$Id$"
-
-/* The relocatable object is manipulated using elfin types. */
-
-#include <stdio.h>
-#include <elf.h>
-#include ELF_MACHINE_H
-
-#ifndef ElfW
-# if ELFCLASSM == ELFCLASS32
-# define ElfW(x) Elf32_ ## x
-# define ELFW(x) ELF32_ ## x
-# else
-# define ElfW(x) Elf64_ ## x
-# define ELFW(x) ELF64_ ## x
-# endif
-#endif
-
-#if defined(COMMON_3264) && defined(ONLY_32)
-# define ObjW(x) obj32_ ## x
-#else
-# if defined(COMMON_3264) && defined(ONLY_64)
-# define ObjW(x) obj64_ ## x
-# else
-# define ObjW(x) obj_ ## x
-# endif
-#endif
-
-/* For some reason this is missing from lib5. */
-#ifndef ELF32_ST_INFO
-# define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
-#endif
-
-#ifndef ELF64_ST_INFO
-# define ELF64_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
-#endif
-
-struct obj_string_patch_struct;
-struct obj_symbol_patch_struct;
-
-struct obj_section
-{
- ElfW(Shdr) header;
- const char *name;
- char *contents;
- struct obj_section *load_next;
- int idx;
-};
-
-struct obj_symbol
-{
- struct obj_symbol *next; /* hash table link */
- const char *name;
- unsigned long value;
- unsigned long size;
- int secidx; /* the defining section index/module */
- int info;
- int ksymidx; /* for export to the kernel symtab */
- int r_type; /* relocation type */
-};
-
-/* Hardcode the hash table size. We shouldn't be needing so many
- symbols that we begin to degrade performance, and we get a big win
- by giving the compiler a constant divisor. */
-
-#define HASH_BUCKETS 521
-
-struct obj_file
-{
- ElfW(Ehdr) header;
- ElfW(Addr) baseaddr;
- struct obj_section **sections;
- struct obj_section *load_order;
- struct obj_section **load_order_search_start;
- struct obj_string_patch_struct *string_patches;
- struct obj_symbol_patch_struct *symbol_patches;
- int (*symbol_cmp)(const char *, const char *);
- unsigned long (*symbol_hash)(const char *);
- unsigned long local_symtab_size;
- struct obj_symbol **local_symtab;
- struct obj_symbol *symtab[HASH_BUCKETS];
- const char *filename;
- char *persist;
-};
-
-enum obj_reloc
-{
- obj_reloc_ok,
- obj_reloc_overflow,
- obj_reloc_dangerous,
- obj_reloc_unhandled,
- obj_reloc_constant_gp
-};
-
-struct obj_string_patch_struct
-{
- struct obj_string_patch_struct *next;
- int reloc_secidx;
- ElfW(Addr) reloc_offset;
- ElfW(Addr) string_offset;
-};
-
-struct obj_symbol_patch_struct
-{
- struct obj_symbol_patch_struct *next;
- int reloc_secidx;
- ElfW(Addr) reloc_offset;
- struct obj_symbol *sym;
-};
-
-
-/* Generic object manipulation routines. */
-
-#define obj_elf_hash ObjW(elf_hash)
-#define obj_elf_hash_n ObjW(elf_hash_n)
-#define obj_add_symbol ObjW(add_symbol)
-#define obj_find_symbol ObjW(find_symbol)
-#define obj_symbol_final_value ObjW(symbol_final_value)
-#define obj_set_symbol_compare ObjW(set_symbol_compare)
-#define obj_find_section ObjW(find_section)
-#define obj_insert_section_load_order ObjW(insert_section_load_order)
-#define obj_create_alloced_section ObjW(create_alloced_section)
-#define obj_create_alloced_section_first \
- ObjW(create_alloced_section_first)
-#define obj_extend_section ObjW(extend_section)
-#define obj_string_patch ObjW(string_patch)
-#define obj_symbol_patch ObjW(symbol_patch)
-#define obj_check_undefineds ObjW(check_undefineds)
-#define obj_clear_undefineds ObjW(clear_undefineds)
-#define obj_allocate_commons ObjW(allocate_commons)
-#define obj_load_size ObjW(load_size)
-#define obj_relocate ObjW(relocate)
-#define obj_load ObjW(load)
-#define obj_free ObjW(free)
-#define obj_create_image ObjW(create_image)
-#define obj_addr_to_native_ptr ObjW(addr_to_native_ptr)
-#define obj_native_ptr_to_addr ObjW(native_ptr_to_addr)
-#define arch_new_file ObjW(arch_new_file)
-#define arch_new_section ObjW(arch_new_section)
-#define arch_new_symbol ObjW(arch_new_symbol)
-#define arch_apply_relocation ObjW(arch_apply_relocation)
-#define arch_create_got ObjW(arch_create_got)
-#define arch_init_module ObjW(arch_init_module)
-#define arch_load_proc_section ObjW(arch_load_proc_section)
-#define arch_finalize_section_address ObjW(arch_finalize_section_address)
-#define arch_archdata ObjW(arch_archdata)
-
-unsigned long obj_elf_hash (const char *);
-
-unsigned long obj_elf_hash_n (const char *, unsigned long len);
-
-struct obj_symbol *obj_add_symbol (struct obj_file *f, const char *name,
- unsigned long symidx, int info, int secidx,
- ElfW(Addr) value, unsigned long size);
-
-struct obj_symbol *obj_find_symbol (struct obj_file *f,
- const char *name);
-
-ElfW(Addr) obj_symbol_final_value (struct obj_file *f,
- struct obj_symbol *sym);
-
-void obj_set_symbol_compare (struct obj_file *f,
- int (*cmp)(const char *, const char *),
- unsigned long (*hash)(const char *));
-
-struct obj_section *obj_find_section (struct obj_file *f,
- const char *name);
-
-void obj_insert_section_load_order (struct obj_file *f,
- struct obj_section *sec);
-
-struct obj_section *obj_create_alloced_section (struct obj_file *f,
- const char *name,
- unsigned long align,
- unsigned long size);
-
-struct obj_section *obj_create_alloced_section_first (struct obj_file *f,
- const char *name,
- unsigned long align,
- unsigned long size);
-
-void *obj_extend_section (struct obj_section *sec, unsigned long more);
-
-int obj_string_patch (struct obj_file *f, int secidx, ElfW(Addr) offset,
- const char *string);
-
-int obj_symbol_patch (struct obj_file *f, int secidx, ElfW(Addr) offset,
- struct obj_symbol *sym);
-
-int obj_check_undefineds (struct obj_file *f, int quiet);
-
-void obj_clear_undefineds (struct obj_file *f);
-
-void obj_allocate_commons (struct obj_file *f);
-
-unsigned long obj_load_size (struct obj_file *f);
-
-int obj_relocate (struct obj_file *f, ElfW(Addr) base);
-
-struct obj_file *obj_load (int f, Elf32_Half e_type, const char *filename);
-
-void obj_free (struct obj_file *f);
-
-int obj_create_image (struct obj_file *f, char *image);
-
-int obj_kallsyms (struct obj_file *fin, struct obj_file **fout);
-
-/* Architecture specific manipulation routines. */
-
-struct obj_file *arch_new_file (void);
-
-struct obj_section *arch_new_section (void);
-
-struct obj_symbol *arch_new_symbol (void);
-
-enum obj_reloc arch_apply_relocation (struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- ElfW(RelM) *rel, ElfW(Addr) value);
-
-int arch_create_got (struct obj_file *f);
-
-struct module;
-int arch_init_module (struct obj_file *f, struct module *);
-
-int arch_load_proc_section (struct obj_section *sec, int fp);
-
-int arch_finalize_section_address (struct obj_file *f, ElfW(Addr) base);
-
-int arch_archdata (struct obj_file *fin, struct obj_section *sec);
-
-#define ARCHDATA_SEC_NAME "__archdata"
-
-/* Pointers in objects can be 32 or 64 bit */
-union obj_ptr_4 {
- Elf32_Word addr;
- void *ptr;
-};
-union obj_ptr_8 {
- Elf64_Xword addr;
- void *ptr;
-};
-
-void *obj_addr_to_native_ptr(ElfW(Addr));
-
-ElfW(Addr) obj_native_ptr_to_addr(void *);
-
-#endif /* obj.h */
diff --git a/mdk-stage1/insmod-modutils/include/util.h b/mdk-stage1/insmod-modutils/include/util.h
deleted file mode 100644
index b2e4a67c3..000000000
--- a/mdk-stage1/insmod-modutils/include/util.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* Miscelaneous utility functions.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-
-#ifndef MODUTILS_UTIL_H
-#define MODUTILS_UTIL_H 1
-
-#ident "$Id$"
-
-#include <stdio.h>
-#include <sys/stat.h>
-
-#define SHELL_META "&();|<>$`\"'\\!{}[]~=+:?*" /* Sum of bj0rn and Debian */
-
-void *xmalloc(size_t);
-void *xrealloc(void *, size_t);
-char *xstrdup(const char *);
-char *xstrcat(char *, const char *, size_t);
-int xsystem(const char *, char *const[]);
-int arch64(void);
-
-typedef int (*xftw_func_t)(const char *, const struct stat *);
-extern int xftw(const char *directory, xftw_func_t);
-
-/* Error logging */
-extern int log;
-extern int errors;
-extern const char *error_file;
-
-extern int flag_verbose;
-extern void verbose(const char *ctl,...);
-
-void error(const char *fmt, ...)
-#ifdef __GNUC__
- __attribute__((format(printf, 1, 2)))
-#endif
- ;
-
-void lprintf(const char *fmt, ...)
-#ifdef __GNUC__
- __attribute__((format(printf, 1, 2)))
-#endif
- ;
-
-void setsyslog(const char *program);
-
-/*
- * Generic globlist <bj0rn@blox.se>
- */
-typedef struct {
- int pathc; /* Count of paths matched so far */
- char **pathv; /* List of matched pathnames. */
-} GLOB_LIST;
-int meta_expand(char *pt, GLOB_LIST *g, char *base_dir, char *version, int type);
-#define ME_BUILTIN_COMMAND 1
-#define ME_SHELL_COMMAND 2
-#define ME_GLOB 4
-#define ME_ALL (ME_GLOB|ME_SHELL_COMMAND|ME_BUILTIN_COMMAND)
-
-extern void snap_shot(const char *module_name, int number);
-extern void snap_shot_log(const char *fmt,...);
-
-#ifdef CONFIG_USE_ZLIB
-int gzf_open(const char *name, int mode);
-int gzf_read(int fd, void *buf, size_t count);
-off_t gzf_lseek(int fd, off_t offset, int whence);
-void gzf_close(int fd);
-
-#else /* ! CONFIG_USE_ZLIB */
-
-#include <unistd.h>
-
-#define gzf_open open
-#define gzf_read read
-#define gzf_lseek lseek
-#define gzf_close close
-
-#endif /* CONFIG_USE_ZLIB */
-
-#define SYMPREFIX "__insmod_";
-extern const char symprefix[10]; /* Must be sizeof(SYMPREFIX), including nul */
-
-#endif /* util.h */
diff --git a/mdk-stage1/insmod-modutils/include/version.h b/mdk-stage1/insmod-modutils/include/version.h
deleted file mode 100644
index 51ca0eb29..000000000
--- a/mdk-stage1/insmod-modutils/include/version.h
+++ /dev/null
@@ -1 +0,0 @@
-#define MODUTILS_VERSION "2.4.2"
diff --git a/mdk-stage1/insmod-modutils/insmod-frontend.c b/mdk-stage1/insmod-modutils/insmod-frontend.c
deleted file mode 100644
index 2b3aa1acb..000000000
--- a/mdk-stage1/insmod-modutils/insmod-frontend.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-
-
-int insmod_main( int argc, char **argv);
-
-int main( int argc, char **argv)
-{
- printf("Using insmod provided by modutils.\n");
- return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-modutils/insmod.c b/mdk-stage1/insmod-modutils/insmod.c
deleted file mode 100644
index 359b28837..000000000
--- a/mdk-stage1/insmod-modutils/insmod.c
+++ /dev/null
@@ -1,1964 +0,0 @@
-/* Insert a module into a running kernel.
- Copyright 1996, 1997 Linux International.
-
- New implementation contributed by Richard Henderson <rth@tamu.edu>
- Based on original work by Bjorn Ekwall <bj0rn@blox.se>
- Restructured (and partly rewritten) by:
- Björn Ekwall <bj0rn@blox.se> February 1999
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
- /*
- Fixes:
-
- Adjust module size for mod_use_count in old_init_module:
- B. James Phillippe <bryan@terran.org>
-
- Merged modprobe + many fixes: Björn Ekwall <bj0rn@blox.se> February 1999
- SMP "friendliness" (and -P): Bill Zumach <zumach+@transarc.com>
-
- Ksymoops support: Keith Owens <kaos@ocs.com.au> August 1999.
-
- Add -r flag: Keith Owens <kaos@ocs.com.au> October 1999.
-
- More flexible recognition of the way the utility was called.
- Suggested by Stepan Kasal, implemented in a different way by Keith
- Owens <kaos@ocs.com.au> December 1999.
-
- Rationalize common code for 32/64 bit architectures.
- Keith Owens <kaos@ocs.com.au> December 1999.
- Add arch64().
- Keith Owens <kaos@ocs.com.au> December 1999.
- kallsyms support
- Keith Owens <kaos@ocs.com.au> April 2000.
- archdata support
- Keith Owens <kaos@ocs.com.au> August 2000.
- Add insmod -O, move print map before sys_init_module.
- Keith Owens <kaos@ocs.com.au> October 2000.
- Add insmod -S.
- Keith Owens <kaos@ocs.com.au> November 2000.
- Add persistent data support.
- Keith Owens <kaos@ocs.com.au> November 2000.
- */
-
-#ident "$Id$"
-
-#include "../insmod.h"
-#include <sys/types.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-//#include <alloca.h> provided by stdlib
-#include <limits.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stddef.h>
-#include <getopt.h>
-#include <sys/stat.h>
-#include <sys/file.h>
-
-#include "module.h"
-#include "obj.h"
-#include "kallsyms.h"
-#include "util.h"
-#include "version.h"
-
-#include "modstat.h"
-#include "config.h"
-
-#define STRVERSIONLEN 32
-
-/*======================================================================*/
-
-static int flag_force_load = 0;
-static int flag_silent_probe = 0;
-static int flag_export = 1;
-static int flag_load_map = 0;
-static int flag_ksymoops = 1;
-
-static int n_ext_modules_used;
-static int m_has_modinfo;
-
-extern int insmod_main(int argc, char **argv);
-extern int insmod_main_32(int argc, char **argv);
-extern int insmod_main_64(int argc, char **argv);
-extern int modprobe_main(int argc, char **argv);
-extern int rmmod_main(int argc, char **argv);
-extern int ksyms_main(int argc, char **argv);
-extern int lsmod_main(int argc, char **argv);
-extern int kallsyms_main(int argc, char **argv);
-
-/*======================================================================*/
-
-/* Get the kernel version in the canonical integer form. */
-
-static int get_kernel_version(char str[STRVERSIONLEN])
-{
- char *p, *q;
- int a, b, c;
-
- strncpy(str, uts_info.release, STRVERSIONLEN);
- p = uts_info.release;
-
- a = strtoul(p, &p, 10);
- if (*p != '.')
- return -1;
- b = strtoul(p + 1, &p, 10);
- if (*p != '.')
- return -1;
- c = strtoul(p + 1, &q, 10);
- if (p + 1 == q)
- return -1;
-
- return a << 16 | b << 8 | c;
-}
-
-/* String comparison for non-co-versioned kernel and module.
- * prefix should be the same as used by genksyms for this kernel.
- */
-static char *ncv_prefix = NULL; /* Overridden by --prefix option */
-static int ncv_plen = 0;
-
-/* Only set prefix once. If set by the user, use it. If not set by the
- * user, look for a well known kernel symbol and derive the prefix from
- * there. Otherwise set the prefix depending on whether uts_info
- * includes SMP or not for backwards compatibility.
- */
-static void set_ncv_prefix(char *prefix)
-{
- static char derived_prefix[256];
- static const char *well_known_symbol[] = { "get_module_symbol_R",
- "inter_module_get_R",
- };
- struct module_symbol *s;
- int i, j, l, m, pl;
- const char *name;
- char *p;
-
- if (ncv_prefix)
- return;
-
- if (prefix)
- ncv_prefix = prefix;
- else {
- /* Extract the prefix (if any) from well known symbols */
- for (i = 0, s = ksyms; i < nksyms; ++i, ++s) {
- name = (char *) s->name;
- l = strlen(name);
- for (j = 0; j < sizeof(well_known_symbol)/sizeof(well_known_symbol[0]); ++j) {
- m = strlen(well_known_symbol[j]);
- if (m + 8 > l ||
- strncmp(name, well_known_symbol[j], m))
- continue;
- pl = l - m - 8;
- if (pl > sizeof(derived_prefix)-1)
- continue; /* Prefix is wrong length */
- /* Must end with 8 hex digits */
- (void) strtoul(name+l-8, &p, 16);
- if (*p == 0) {
- strncpy(derived_prefix, name+m, pl);
- *(derived_prefix+pl) = '\0';
- ncv_prefix = derived_prefix;
- break;
- }
- }
- }
- }
- if (!ncv_prefix) {
- p = strchr(uts_info.version, ' ');
- if (p && *(++p) && !strncmp(p, "SMP ", 4))
- ncv_prefix = "smp_";
- else
- ncv_prefix = "";
- }
- ncv_plen = strlen(ncv_prefix);
- if (flag_verbose)
- lprintf("Symbol version prefix '%s'", ncv_prefix);
-}
-
-static int ncv_strcmp(const char *a, const char *b)
-{
- size_t alen = strlen(a), blen = strlen(b);
-
- if (blen == alen + 10 + ncv_plen &&
- b[alen] == '_' &&
- b[alen + 1] == 'R' &&
- !(ncv_plen && strncmp(b + alen + 2, ncv_prefix, ncv_plen))) {
- return strncmp(a, b, alen);
- } else if (alen == blen + 10 + ncv_plen &&
- a[blen] == '_' && a[blen + 1] == 'R' &&
- !(ncv_plen && strncmp(a + blen + 2, ncv_prefix, ncv_plen))) {
- return strncmp(a, b, blen);
- } else
- return strcmp(a, b);
-}
-
-/*
- * String hashing for non-co-versioned kernel and module.
- * Here we are simply forced to drop the crc from the hash.
- */
-static unsigned long ncv_symbol_hash(const char *str)
-{
- size_t len = strlen(str);
-
- if (len > 10 + ncv_plen &&
- str[len - 10 - ncv_plen] == '_' &&
- str[len - 9 - ncv_plen] == 'R' &&
- !(
- ncv_plen &&
- strncmp(str + len - (8 + ncv_plen), ncv_prefix, ncv_plen)
- ))
- len -= 10 + ncv_plen;
- return obj_elf_hash_n(str, len);
-}
-
-/*
- * Conditionally add the symbols from the given symbol set
- * to the new module.
- */
-static int add_symbols_from(struct obj_file *f, int idx,
- struct module_symbol *syms, size_t nsyms)
-{
- struct module_symbol *s;
- size_t i;
- int used = 0;
-
- for (i = 0, s = syms; i < nsyms; ++i, ++s) {
- /*
- * Only add symbols that are already marked external.
- * If we override locals we may cause problems for
- * argument initialization.
- * We will also create a false dependency on the module.
- */
- struct obj_symbol *sym;
-
- sym = obj_find_symbol(f, (char *) s->name);
- if (sym && !ELFW(ST_BIND) (sym->info) == STB_LOCAL) {
- sym = obj_add_symbol(f, (char *) s->name, -1,
- ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
- idx, s->value, 0);
- /*
- * Did our symbol just get installed?
- * If so, mark the module as "used".
- */
- if (sym->secidx == idx)
- used = 1;
- }
- }
-
- return used;
-}
-
-static void add_kernel_symbols(struct obj_file *f)
-{
- struct module_stat *m;
- size_t i, nused = 0;
-
- /* Add module symbols first. */
- for (i = 0, m = module_stat; i < n_module_stat; ++i, ++m)
- if (m->nsyms &&
- add_symbols_from(f, SHN_HIRESERVE + 2 + i, m->syms, m->nsyms))
- m->status = 1 /* used */, ++nused;
- n_ext_modules_used = nused;
-
- /* And finally the symbols from the kernel proper. */
- if (nksyms)
- add_symbols_from(f, SHN_HIRESERVE + 1, ksyms, nksyms);
-}
-
-static void hide_special_symbols(struct obj_file *f)
-{
- struct obj_symbol *sym;
- const char *const *p;
- static const char *const specials[] =
- {
- "cleanup_module",
- "init_module",
- "kernel_version",
- NULL
- };
-
- for (p = specials; *p; ++p)
- if ((sym = obj_find_symbol(f, *p)) != NULL)
- sym->info = ELFW(ST_INFO) (STB_LOCAL, ELFW(ST_TYPE) (sym->info));
-}
-
-static void print_load_map(struct obj_file *f)
-{
- struct obj_symbol *sym;
- struct obj_symbol **all, **p;
- struct obj_section *sec;
- int load_map_cmp(const void *a, const void *b) {
- struct obj_symbol **as = (struct obj_symbol **) a;
- struct obj_symbol **bs = (struct obj_symbol **) b;
- unsigned long aa = obj_symbol_final_value(f, *as);
- unsigned long ba = obj_symbol_final_value(f, *bs);
- return aa < ba ? -1 : aa > ba ? 1 : 0;
- }
- int i, nsyms, *loaded;
-
- /* Report on the section layout. */
-
- lprintf("Sections: Size %-*s Align",
- (int) (2 * sizeof(void *)), "Address");
-
- for (sec = f->load_order; sec; sec = sec->load_next) {
- int a;
- unsigned long tmp;
-
- for (a = -1, tmp = sec->header.sh_addralign; tmp; ++a)
- tmp >>= 1;
- if (a == -1)
- a = 0;
-
- lprintf("%-16s%08lx %0*lx 2**%d",
- sec->name,
- (long)sec->header.sh_size,
- (int) (2 * sizeof(void *)),
- (long)sec->header.sh_addr,
- a);
- }
-
- /* Quick reference which section indicies are loaded. */
-
- loaded = alloca(sizeof(int) * (i = f->header.e_shnum));
- while (--i >= 0)
- loaded[i] = (f->sections[i]->header.sh_flags & SHF_ALLOC) != 0;
-
- /* Collect the symbols we'll be listing. */
-
- for (nsyms = i = 0; i < HASH_BUCKETS; ++i)
- for (sym = f->symtab[i]; sym; sym = sym->next)
- if (sym->secidx <= SHN_HIRESERVE
- && (sym->secidx >= SHN_LORESERVE || loaded[sym->secidx]))
- ++nsyms;
-
- all = alloca(nsyms * sizeof(struct obj_symbol *));
-
- for (i = 0, p = all; i < HASH_BUCKETS; ++i)
- for (sym = f->symtab[i]; sym; sym = sym->next)
- if (sym->secidx <= SHN_HIRESERVE
- && (sym->secidx >= SHN_LORESERVE || loaded[sym->secidx]))
- *p++ = sym;
-
- /* Sort them by final value. */
- qsort(all, nsyms, sizeof(struct obj_file *), load_map_cmp);
-
- /* And list them. */
- lprintf("\nSymbols:");
- for (p = all; p < all + nsyms; ++p) {
- char type = '?';
- unsigned long value;
-
- sym = *p;
- if (sym->secidx == SHN_ABS) {
- type = 'A';
- value = sym->value;
- } else if (sym->secidx == SHN_UNDEF) {
- type = 'U';
- value = 0;
- } else {
- struct obj_section *sec = f->sections[sym->secidx];
-
- if (sec->header.sh_type == SHT_NOBITS)
- type = 'B';
- else if (sec->header.sh_flags & SHF_ALLOC) {
- if (sec->header.sh_flags & SHF_EXECINSTR)
- type = 'T';
- else if (sec->header.sh_flags & SHF_WRITE)
- type = 'D';
- else
- type = 'R';
- }
- value = sym->value + sec->header.sh_addr;
- }
-
- if (ELFW(ST_BIND) (sym->info) == STB_LOCAL)
- type = tolower(type);
-
- lprintf("%0*lx %c %s", (int) (2 * sizeof(void *)), value,
- type, sym->name);
- }
-}
-
-/************************************************************************/
-/* begin compat */
-
-static char * get_modinfo_value(struct obj_file *f, const char *key)
-{
- struct obj_section *sec;
- char *p, *v, *n, *ep;
- size_t klen = strlen(key);
-
- sec = obj_find_section(f, ".modinfo");
- if (sec == NULL)
- return NULL;
-
- p = sec->contents;
- ep = p + sec->header.sh_size;
- while (p < ep) {
- v = strchr(p, '=');
- n = strchr(p, '\0');
- if (v) {
- if (v - p == klen && strncmp(p, key, klen) == 0)
- return v + 1;
- } else {
- if (n - p == klen && strcmp(p, key) == 0)
- return n;
- }
- p = n + 1;
- }
-
- return NULL;
-}
-
-static int create_this_module(struct obj_file *f, const char *m_name)
-{
- struct obj_section *sec;
-
- sec = obj_create_alloced_section_first(f, ".this", tgt_sizeof_long,
- sizeof(struct module));
- memset(sec->contents, 0, sizeof(struct module));
-
- obj_add_symbol(f, "__this_module", -1, ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT),
- sec->idx, 0, sizeof(struct module));
-
- obj_string_patch(f, sec->idx, offsetof(struct module, name), m_name);
-
- return 1;
-}
-
-#ifdef COMPAT_2_0
-static int old_create_mod_use_count(struct obj_file *f)
-{
- struct obj_section *sec;
- struct obj_symbol *got;
-
- sec = obj_create_alloced_section_first(f, ".moduse",
- sizeof(long), sizeof(long));
-
- obj_add_symbol(f, "mod_use_count_",
- -1, ELFW(ST_INFO)(STB_LOCAL, STT_OBJECT),
- sec->idx, 0, sizeof(long));
-
- /*
- * patb: if there is a _GLOBAL_OFFSET_TABLE_,
- * add .got section for PIC type modules;
- * we have to do this here, because obj_* calls are not made until
- * after obj_check_undefined
- * is there a better place for this exception?
- */
- got = obj_find_symbol(f, "_GLOBAL_OFFSET_TABLE_");
- if (got)
-{
- sec = obj_create_alloced_section(f, ".got",
- sizeof(long), sizeof(long));
- got->secidx = sec->idx; /* mark the symbol as defined */
- }
- return 1;
-}
-#endif
-
-/* add an entry to the __ksymtab section, creating it if necessary */
-static void add_ksymtab(struct obj_file *f, struct obj_symbol *sym)
-{
- struct obj_section *sec;
- ElfW(Addr) ofs;
-
- /* ensure __ksymtab is allocated, EXPORT_NOSYMBOLS creates a non-alloc section.
- * If __ksymtab is defined but not marked alloc, x out the first character
- * (no obj_delete routine) and create a new __ksymtab with the correct
- * characteristics.
- */
- sec = obj_find_section(f, "__ksymtab");
- if (sec && !(sec->header.sh_flags & SHF_ALLOC)) {
- *((char *)(sec->name)) = 'x'; /* override const */
- sec = NULL;
- }
- if (!sec)
- sec = obj_create_alloced_section(f, "__ksymtab", tgt_sizeof_void_p, 0);
- if (!sec)
- return;
- sec->header.sh_flags |= SHF_ALLOC;
-
- ofs = sec->header.sh_size;
- obj_symbol_patch(f, sec->idx, ofs, sym);
- obj_string_patch(f, sec->idx, ofs + tgt_sizeof_void_p, sym->name);
- obj_extend_section(sec, 2 * tgt_sizeof_char_p);
-}
-
-static int create_module_ksymtab(struct obj_file *f)
-{
- struct obj_section *sec;
- int i;
-
- /* We must always add the module references. */
-
- if (n_ext_modules_used) {
- struct module_ref *dep;
- struct obj_symbol *tm;
-
- sec = obj_create_alloced_section(f, ".kmodtab", tgt_sizeof_void_p,
- (sizeof(struct module_ref)
- * n_ext_modules_used));
- if (!sec)
- return 0;
-
- tm = obj_find_symbol(f, "__this_module");
- dep = (struct module_ref *) sec->contents;
- for (i = 0; i < n_module_stat; ++i)
- if (module_stat[i].status /* used */) {
- dep->dep = module_stat[i].addr;
- obj_symbol_patch(f, sec->idx, (char *) &dep->ref - sec->contents, tm);
- dep->next_ref = 0;
- ++dep;
- }
- }
- if (flag_export && !obj_find_section(f, "__ksymtab")) {
- int *loaded;
-
- /* We don't want to export symbols residing in sections that
- aren't loaded. There are a number of these created so that
- we make sure certain module options don't appear twice. */
-
- loaded = alloca(sizeof(int) * (i = f->header.e_shnum));
- while (--i >= 0)
- loaded[i] = (f->sections[i]->header.sh_flags & SHF_ALLOC) != 0;
-
- for (i = 0; i < HASH_BUCKETS; ++i) {
- struct obj_symbol *sym;
- for (sym = f->symtab[i]; sym; sym = sym->next) {
- if (ELFW(ST_BIND) (sym->info) != STB_LOCAL
- && sym->secidx <= SHN_HIRESERVE
- && (sym->secidx >= SHN_LORESERVE
- || loaded[sym->secidx])) {
- add_ksymtab(f, sym);
- }
- }
- }
- }
- return 1;
-}
-
-/* Get the module's kernel version in the canonical integer form. */
-static int get_module_version(struct obj_file *f, char str[STRVERSIONLEN])
-{
- int a, b, c;
- char *p, *q;
-
- if ((p = get_modinfo_value(f, "kernel_version")) == NULL) {
- struct obj_symbol *sym;
-
- m_has_modinfo = 0;
- if ((sym = obj_find_symbol(f, "kernel_version")) == NULL)
- sym = obj_find_symbol(f, "__module_kernel_version");
- if (sym == NULL)
- return -1;
- p = f->sections[sym->secidx]->contents + sym->value;
- } else
- m_has_modinfo = 1;
-
- strncpy(str, p, STRVERSIONLEN);
-
- a = strtoul(p, &p, 10);
- if (*p != '.')
- return -1;
- b = strtoul(p + 1, &p, 10);
- if (*p != '.')
- return -1;
- c = strtoul(p + 1, &q, 10);
- if (p + 1 == q)
- return -1;
-
- return a << 16 | b << 8 | c;
-}
-
-/* Return the kernel symbol checksum version, or zero if not used. */
-static int is_kernel_checksummed(void)
-{
- struct module_symbol *s;
- size_t i;
-
- /*
- * Using_Versions might not be the first symbol,
- * but it should be in there.
- */
- for (i = 0, s = ksyms; i < nksyms; ++i, ++s)
- if (strcmp((char *) s->name, "Using_Versions") == 0)
- return s->value;
-
- return 0;
-}
-
-static int is_module_checksummed(struct obj_file *f)
-{
- if (m_has_modinfo) {
- const char *p = get_modinfo_value(f, "using_checksums");
- if (p)
- return atoi(p);
- else
- return 0;
- } else
- return obj_find_symbol(f, "Using_Versions") != NULL;
-}
-
-/* add module source, timestamp, kernel version and a symbol for the
- * start of some sections. this info is used by ksymoops to do better
- * debugging.
- */
-static void add_ksymoops_symbols(struct obj_file *f, const char *filename,
- const char *m_name)
-{
- struct obj_section *sec;
- struct obj_symbol *sym;
- char *name, *absolute_filename;
- char str[STRVERSIONLEN], real[PATH_MAX];
- int i, l, lm_name, lfilename, use_ksymtab, version;
- struct stat statbuf;
-
- static const char *section_names[] = {
- ".text",
- ".rodata",
- ".data",
- ".bss"
- };
-
- if (realpath(filename, real)) {
- absolute_filename = xstrdup(real);
- }
- else {
- int save_errno = errno;
- error("cannot get realpath for %s", filename);
- errno = save_errno;
- absolute_filename = xstrdup(filename);
- }
-
- lm_name = strlen(m_name);
- lfilename = strlen(absolute_filename);
-
- /* add to ksymtab if it already exists or there is no ksymtab and other symbols
- * are not to be exported. otherwise leave ksymtab alone for now, the
- * "export all symbols" compatibility code will export these symbols later.
- */
-
- use_ksymtab = obj_find_section(f, "__ksymtab") || !flag_export;
-
- if ((sec = obj_find_section(f, ".this"))) {
- /* tag the module header with the object name, last modified
- * timestamp and module version. worst case for module version
- * is 0xffffff, decimal 16777215. putting all three fields in
- * one symbol is less readable but saves kernel space.
- */
- l = sizeof(symprefix)+ /* "__insmod_" */
- lm_name+ /* module name */
- 2+ /* "_O" */
- lfilename+ /* object filename */
- 2+ /* "_M" */
- 2*sizeof(statbuf.st_mtime)+ /* mtime in hex */
- 2+ /* "_V" */
- 8+ /* version in dec */
- 1; /* nul */
- name = xmalloc(l);
- if (stat(absolute_filename, &statbuf) != 0)
- statbuf.st_mtime = 0;
- version = get_module_version(f, str); /* -1 if not found */
- snprintf(name, l, "%s%s_O%s_M%0*lX_V%d",
- symprefix, m_name, absolute_filename,
- 2*sizeof(statbuf.st_mtime), statbuf.st_mtime,
- version);
- sym = obj_add_symbol(f, name, -1,
- ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
- sec->idx, sec->header.sh_addr, 0);
- if (use_ksymtab)
- add_ksymtab(f, sym);
- }
- free(absolute_filename);
-
- /* record where the persistent data is going, same address as previous symbol */
-
- if (f->persist) {
- l = sizeof(symprefix)+ /* "__insmod_" */
- lm_name+ /* module name */
- 2+ /* "_P" */
- strlen(f->persist)+ /* data store */
- 1; /* nul */
- name = xmalloc(l);
- snprintf(name, l, "%s%s_P%s",
- symprefix, m_name, f->persist);
- sym = obj_add_symbol(f, name, -1, ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
- sec->idx, sec->header.sh_addr, 0);
- if (use_ksymtab)
- add_ksymtab(f, sym);
- }
-
- /* tag the desired sections if size is non-zero */
-
- for (i = 0; i < sizeof(section_names)/sizeof(section_names[0]); ++i) {
- if ((sec = obj_find_section(f, section_names[i])) &&
- sec->header.sh_size) {
- l = sizeof(symprefix)+ /* "__insmod_" */
- lm_name+ /* module name */
- 2+ /* "_S" */
- strlen(sec->name)+ /* section name */
- 2+ /* "_L" */
- 8+ /* length in dec */
- 1; /* nul */
- name = xmalloc(l);
- snprintf(name, l, "%s%s_S%s_L%ld",
- symprefix, m_name, sec->name,
- (long)sec->header.sh_size);
- sym = obj_add_symbol(f, name, -1, ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
- sec->idx, sec->header.sh_addr, 0);
- if (use_ksymtab)
- add_ksymtab(f, sym);
- }
- }
-}
-
-static int process_module_arguments(struct obj_file *f, int argc, char **argv, int required)
-{
- for (; argc > 0; ++argv, --argc) {
- struct obj_symbol *sym;
- int c;
- int min, max;
- int n;
- char *contents;
- char *input;
- char *fmt;
- char *key;
- char *loc;
-
- if ((input = strchr(*argv, '=')) == NULL)
- continue;
-
- n = input - *argv;
- input += 1; /* skip '=' */
-
- key = alloca(n + 6);
-
- if (m_has_modinfo) {
- memcpy(key, "parm_", 5);
- memcpy(key + 5, *argv, n);
- key[n + 5] = '\0';
- if ((fmt = get_modinfo_value(f, key)) == NULL) {
- if (required) {
- error("invalid parameter %s", key);
- return 0;
- }
- else {
- if (flag_verbose)
- lprintf("ignoring %s", *argv);
- continue; /* silently ignore optional parameters */
- }
- }
- key += 5;
-
- if (isdigit(*fmt)) {
- min = strtoul(fmt, &fmt, 10);
- if (*fmt == '-')
- max = strtoul(fmt + 1, &fmt, 10);
- else
- max = min;
- } else
- min = max = 1;
- } else { /* not m_has_modinfo */
- memcpy(key, *argv, n);
- key[n] = '\0';
-
- if (isdigit(*input))
- fmt = "i";
- else
- fmt = "s";
- min = max = 0;
- }
-
- sym = obj_find_symbol(f, key);
-
- /*
- * Also check that the parameter was not
- * resolved from the kernel.
- */
- if (sym == NULL || sym->secidx > SHN_HIRESERVE) {
- error("symbol for parameter %s not found", key);
- return 0;
- }
-
- contents = f->sections[sym->secidx]->contents;
- loc = contents + sym->value;
- n = 1;
-
- while (*input) {
- char *str;
-
- switch (*fmt) {
- case 's':
- case 'c':
- /*
- * Do C quoting if we begin with a ",
- * else slurp the lot.
- */
- if (*input == '"') {
- char *r;
-
- str = alloca(strlen(input));
- for (r = str, input++; *input != '"'; ++input, ++r) {
- if (*input == '\0') {
- error("improperly terminated string argument for %s", key);
- return 0;
- }
- /* else */
- if (*input != '\\') {
- *r = *input;
- continue;
- }
- /* else handle \ */
- switch (*++input) {
- case 'a': *r = '\a'; break;
- case 'b': *r = '\b'; break;
- case 'e': *r = '\033'; break;
- case 'f': *r = '\f'; break;
- case 'n': *r = '\n'; break;
- case 'r': *r = '\r'; break;
- case 't': *r = '\t'; break;
-
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- c = *input - '0';
- if ('0' <= input[1] && input[1] <= '7') {
- c = (c * 8) + *++input - '0';
- if ('0' <= input[1] && input[1] <= '7')
- c = (c * 8) + *++input - '0';
- }
- *r = c;
- break;
-
- default: *r = *input; break;
- }
- }
- *r = '\0';
- ++input;
- } else {
- /*
- * The string is not quoted.
- * We will break it using the comma
- * (like for ints).
- * If the user wants to include commas
- * in a string, he just has to quote it
- */
- char *r;
-
- /* Search the next comma */
- if ((r = strchr(input, ',')) != NULL) {
- /*
- * Found a comma
- * Recopy the current field
- */
- str = alloca(r - input + 1);
- memcpy(str, input, r - input);
- str[r - input] = '\0';
- /* Keep next fields */
- input = r;
- } else {
- /* last string */
- str = input;
- input = "";
- }
- }
-
- if (*fmt == 's') {
- /* Normal string */
- obj_string_patch(f, sym->secidx, loc - contents, str);
- loc += tgt_sizeof_char_p;
- } else {
- /* Array of chars (in fact, matrix !) */
- long charssize; /* size of each member */
-
- /* Get the size of each member */
- /* Probably we should do that outside the loop ? */
- if (!isdigit(*(fmt + 1))) {
- error("parameter type 'c' for %s must be followed by"
- " the maximum size", key);
- return 0;
- }
- charssize = strtoul(fmt + 1, (char **) NULL, 10);
-
- /* Check length */
- if (strlen(str) >= charssize-1) {
- error("string too long for %s (max %ld)",
- key, charssize - 1);
- return 0;
- }
- /* Copy to location */
- strcpy((char *) loc, str); /* safe, see check above */
- loc += charssize;
- }
- /*
- * End of 's' and 'c'
- */
- break;
-
- case 'b':
- *loc++ = strtoul(input, &input, 0);
- break;
-
- case 'h':
- *(short *) loc = strtoul(input, &input, 0);
- loc += tgt_sizeof_short;
- break;
-
- case 'i':
- *(int *) loc = strtoul(input, &input, 0);
- loc += tgt_sizeof_int;
- break;
-
- case 'l':
- *(long *) loc = strtoul(input, &input, 0);
- loc += tgt_sizeof_long;
- break;
-
- default:
- error("unknown parameter type '%c' for %s",
- *fmt, key);
- return 0;
- }
- /*
- * end of switch (*fmt)
- */
-
- while (*input && isspace(*input))
- ++input;
- if (*input == '\0')
- break; /* while (*input) */
- /* else */
-
- if (*input == ',') {
- if (max && (++n > max)) {
- error("too many values for %s (max %d)", key, max);
- return 0;
- }
- ++input;
- /* continue with while (*input) */
- } else {
- error("invalid argument syntax for %s: '%c'",
- key, *input);
- return 0;
- }
- } /* end of while (*input) */
-
- if (min && (n < min)) {
- error("too few values for %s (min %d)", key, min);
- return 0;
- }
- } /* end of for (;argc > 0;) */
-
- return 1;
-}
-
-
-/* Add a kallsyms section if the kernel supports all symbols. */
-static int add_kallsyms(struct obj_file *f,
- struct obj_section **module_kallsyms, int force_kallsyms)
-{
- struct module_symbol *s;
- struct obj_file *f_kallsyms;
- struct obj_section *sec_kallsyms;
- size_t i;
- int l;
- const char *p, *pt_R;
- unsigned long start = 0, stop = 0;
-
- for (i = 0, s = ksyms; i < nksyms; ++i, ++s) {
- p = (char *)s->name;
- pt_R = strstr(p, "_R");
- if (pt_R)
- l = pt_R - p;
- else
- l = strlen(p);
- if (strncmp(p, "__start_" KALLSYMS_SEC_NAME, l) == 0)
- start = s->value;
- else if (strncmp(p, "__stop_" KALLSYMS_SEC_NAME, l) == 0)
- stop = s->value;
- }
-
- if (start >= stop && !force_kallsyms)
- return(0);
-
- /* The kernel contains all symbols, do the same for this module. */
-
- /* Add an empty kallsyms section to the module if necessary */
- for (i = 0; i < f->header.e_shnum; ++i) {
- if (strcmp(f->sections[i]->name, KALLSYMS_SEC_NAME) == 0) {
- *module_kallsyms = f->sections[i];
- break;
- }
- }
- if (!*module_kallsyms)
- *module_kallsyms = obj_create_alloced_section(f, KALLSYMS_SEC_NAME, 0, 0);
-
- /* Size and populate kallsyms */
- if (obj_kallsyms(f, &f_kallsyms))
- return(1);
- sec_kallsyms = f_kallsyms->sections[KALLSYMS_IDX];
- (*module_kallsyms)->header.sh_addralign = sec_kallsyms->header.sh_addralign;
- (*module_kallsyms)->header.sh_size = sec_kallsyms->header.sh_size;
- free((*module_kallsyms)->contents);
- (*module_kallsyms)->contents = sec_kallsyms->contents;
- sec_kallsyms->contents = NULL;
- obj_free(f_kallsyms);
-
- return 0;
-}
-
-
-/* Add an arch data section if the arch wants it. */
-static int add_archdata(struct obj_file *f,
- struct obj_section **sec)
-{
- size_t i;
-
- *sec = NULL;
- /* Add an empty archdata section to the module if necessary */
- for (i = 0; i < f->header.e_shnum; ++i) {
- if (strcmp(f->sections[i]->name, ARCHDATA_SEC_NAME) == 0) {
- *sec = f->sections[i];
- break;
- }
- }
- if (!*sec)
- *sec = obj_create_alloced_section(f, ARCHDATA_SEC_NAME, 16, 0);
-
- /* Size and populate archdata */
- if (arch_archdata(f, *sec))
- return(1);
- return 0;
-}
-
-
-static int init_module(const char *m_name, struct obj_file *f,
- unsigned long m_size, const char *blob_name,
- unsigned int noload, unsigned int flag_load_map)
-{
- struct module *module;
- struct obj_section *sec;
- void *image;
- int ret = 0;
- tgt_long m_addr;
-
- sec = obj_find_section(f, ".this");
- module = (struct module *) sec->contents;
- m_addr = sec->header.sh_addr;
-
- module->size_of_struct = sizeof(*module);
- module->size = m_size;
- module->flags = flag_autoclean ? NEW_MOD_AUTOCLEAN : 0;
-
- sec = obj_find_section(f, "__ksymtab");
- if (sec && sec->header.sh_size) {
- module->syms = sec->header.sh_addr;
- module->nsyms = sec->header.sh_size / (2 * tgt_sizeof_char_p);
- }
- if (n_ext_modules_used) {
- sec = obj_find_section(f, ".kmodtab");
- module->deps = sec->header.sh_addr;
- module->ndeps = n_ext_modules_used;
- }
- module->init = obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
- module->cleanup = obj_symbol_final_value(f,
- obj_find_symbol(f, "cleanup_module"));
-
- sec = obj_find_section(f, "__ex_table");
- if (sec) {
- module->ex_table_start = sec->header.sh_addr;
- module->ex_table_end = sec->header.sh_addr + sec->header.sh_size;
- }
- sec = obj_find_section(f, ".text.init");
- if (sec) {
- module->runsize = sec->header.sh_addr - m_addr;
- }
- sec = obj_find_section(f, ".data.init");
- if (sec) {
- if (!module->runsize ||
- module->runsize > sec->header.sh_addr - m_addr)
- module->runsize = sec->header.sh_addr - m_addr;
- }
- sec = obj_find_section(f, ARCHDATA_SEC_NAME);
- if (sec && sec->header.sh_size) {
- module->archdata_start = sec->header.sh_addr;
- module->archdata_end = module->archdata_start + sec->header.sh_size;
- }
- sec = obj_find_section(f, KALLSYMS_SEC_NAME);
- if (sec && sec->header.sh_size) {
- module->kallsyms_start = sec->header.sh_addr;
- module->kallsyms_end = module->kallsyms_start + sec->header.sh_size;
- }
- if (!arch_init_module(f, module))
- return 0;
-
- /*
- * Whew! All of the initialization is complete.
- * Collect the final module image and give it to the kernel.
- */
- image = xmalloc(m_size);
- obj_create_image(f, image);
-
- if (flag_load_map)
- print_load_map(f);
-
- if (blob_name) {
- int fd, l;
- fd = open(blob_name, O_WRONLY|O_CREAT|O_TRUNC, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
- if (fd < 0) {
- error("open %s failed %m", blob_name);
- ret = -1;
- }
- else {
- if ((l = write(fd, image, m_size)) != m_size) {
- error("write %s failed %m", blob_name);
- ret = -1;
- }
- close(fd);
- }
- }
-
- if (ret == 0 && !noload) {
- fflush(stdout); /* Flush any debugging output */
- ret = sys_init_module(m_name, (struct module *) image);
- if (ret) {
- error("init_module: %m");
- lprintf("Hint: insmod errors can be caused by incorrect module parameters, "
- "including invalid IO or IRQ parameters");
- }
- }
-
- free(image);
-
- return ret == 0;
-}
-
-#ifdef COMPAT_2_0
-static int old_init_module(const char *m_name, struct obj_file *f,
- unsigned long m_size)
-{
- char *image;
- struct old_mod_routines routines;
- struct old_symbol_table *symtab;
- int ret;
- int nsyms = 0, strsize = 0, total;
-
- /* Create the symbol table */
- /* Size things first... */
- if (flag_export) {
- int i;
- for (i = 0; i < HASH_BUCKETS; ++i) {
- struct obj_symbol *sym;
-
- for (sym = f->symtab[i]; sym; sym = sym->next)
- if (ELFW(ST_BIND) (sym->info) != STB_LOCAL &&
- sym->secidx <= SHN_HIRESERVE) {
- sym->ksymidx = nsyms++;
- strsize += strlen(sym->name) + 1;
- }
- }
- }
- total = (sizeof(struct old_symbol_table) +
- nsyms * sizeof(struct old_module_symbol) +
- n_ext_modules_used * sizeof(struct old_module_ref) +
- strsize);
- symtab = xmalloc(total);
- symtab->size = total;
- symtab->n_symbols = nsyms;
- symtab->n_refs = n_ext_modules_used;
-
- if (flag_export && nsyms) {
- struct old_module_symbol *ksym;
- char *str;
- int i;
-
- ksym = symtab->symbol;
- str = ((char *) ksym +
- nsyms * sizeof(struct old_module_symbol) +
- n_ext_modules_used * sizeof(struct old_module_ref));
-
- for (i = 0; i < HASH_BUCKETS; ++i) {
- struct obj_symbol *sym;
- for (sym = f->symtab[i]; sym; sym = sym->next)
- if (sym->ksymidx >= 0) {
- ksym->addr = obj_symbol_final_value(f, sym);
- ksym->name = (unsigned long) str - (unsigned long) symtab;
-
- str = stpcpy(str, sym->name) + 1;
- ksym++;
- }
- }
- }
-
- if (n_ext_modules_used) {
- struct old_module_ref *ref;
- int i;
-
- ref = (struct old_module_ref *)
- ((char *) symtab->symbol + nsyms * sizeof(struct old_module_symbol));
-
- for (i = 0; i < n_module_stat; ++i) {
- if (module_stat[i].status /* used */) {
- ref++->module = module_stat[i].modstruct;
- }
- }
- }
-
- /* Fill in routines. */
-
- routines.init = obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
- routines.cleanup = obj_symbol_final_value(f,
- obj_find_symbol(f, "cleanup_module"));
-
- /*
- * Whew! All of the initialization is complete.
- * Collect the final module image and give it to the kernel.
- */
- image = xmalloc(m_size);
- obj_create_image(f, image);
-
- /*
- * image holds the complete relocated module,
- * accounting correctly for mod_use_count.
- * However the old module kernel support assume that it
- * is receiving something which does not contain mod_use_count.
- */
- ret = old_sys_init_module(m_name, image + sizeof(long),
- (m_size - sizeof(long)) |
- (flag_autoclean ? OLD_MOD_AUTOCLEAN : 0),
- &routines,
- symtab);
- if (ret)
- error("init_module: %m");
-
- free(image);
- free(symtab);
-
- return ret == 0;
-}
-#endif
-/* end compat */
-/************************************************************************/
-
-/* Check that a module parameter has a reasonable definition */
-static int check_module_parameter(struct obj_file *f, char *key, char *value, int *persist_flag)
-{
- struct obj_symbol *sym;
- int min, max;
- char *p = value;
-
- sym = obj_find_symbol(f, key);
- if (sym == NULL) {
- /* FIXME: For 2.2 kernel compatibility, only issue warnings for
- * most error conditions. Make these all errors in 2.5.
- */
- lprintf("Warning: %s symbol for parameter %s not found", error_file, key);
- return(1);
- }
-
- if (isdigit(*p)) {
- min = strtoul(p, &p, 10);
- if (*p == '-')
- max = strtoul(p + 1, &p, 10);
- else
- max = min;
- } else
- min = max = 1;
-
- if (max < min) {
- lprintf("Warning: %s parameter %s has max < min!", error_file, key);
- return(1);
- }
-
- switch (*p) {
- case 'c':
- if (!isdigit(p[1])) {
- lprintf("%s parameter %s has no size after 'c'!", error_file, key);
- return(1);
- }
- while (isdigit(p[1]))
- ++p; /* swallow c array size */
- break;
- case 'b': /* drop through */
- case 'h': /* drop through */
- case 'i': /* drop through */
- case 'l': /* drop through */
- case 's':
- break;
- case '\0':
- lprintf("%s parameter %s has no format character!", error_file, key);
- return(1);
- default:
- lprintf("%s parameter %s has unknown format character '%c'", error_file, key, *p);
- return(1);
- }
- switch (*++p) {
- case 'p':
- if (*(p-1) == 's') {
- error("parameter %s is invalid persistent string", key);
- return(1);
- }
- *persist_flag = 1;
- break;
- case '\0':
- break;
- default:
- lprintf("%s parameter %s has unknown format modifier '%c'", error_file, key, *p);
- return(1);
- }
- return(0);
-}
-
-/* Check that all module parameters have reasonable definitions */
-static void check_module_parameters(struct obj_file *f, int *persist_flag)
-{
- struct obj_section *sec;
- char *ptr, *value, *n, *endptr;
- int namelen, err = 0;
-
- sec = obj_find_section(f, ".modinfo");
- if (sec == NULL) {
- /* module does not support typed parameters */
- return;
- }
-
- ptr = sec->contents;
- endptr = ptr + sec->header.sh_size;
- while (ptr < endptr && !err) {
- value = strchr(ptr, '=');
- n = strchr(ptr, '\0');
- if (value) {
- namelen = value - ptr;
- if (namelen >= 5 && strncmp(ptr, "parm_", 5) == 0
- && !(namelen > 10 && strncmp(ptr, "parm_desc_", 10) == 0)) {
- char *pname = xmalloc(namelen + 1);
- strncpy(pname, ptr + 5, namelen - 5);
- pname[namelen - 5] = '\0';
- err = check_module_parameter(f, pname, value+1, persist_flag);
- free(pname);
- }
- } else {
- if (n - ptr >= 5 && strncmp(ptr, "parm_", 5) == 0) {
- error("parameter %s found with no value", ptr);
- err = 1;
- }
- }
- ptr = n + 1;
- }
-
- if (err)
- *persist_flag = 0;
- return;
-}
-
-
-/* For common 3264 code, only compile the usage message once, in the 64 bit version */
-#if defined(COMMON_3264) && defined(ONLY_32)
-extern void insmod_usage(void); /* Use the copy in the 64 bit version */
-#else /* Common 64 bit version or any non common code - compile usage routine */
-void insmod_usage(void)
-{
- fputs("Usage:\n"
- "insmod [-fhkLmnpqrsSvVxXyY] [-e persist_name] [-o module_name] [-O blob_name] [-P prefix] module [ symbol=value ... ]\n"
- "\n"
- " module Name of a loadable kernel module ('.o' can be omitted)\n"
- " -f, --force Force loading under wrong kernel version\n"
- " -h, --help Print this message\n"
- " -k, --autoclean Make module autoclean-able\n"
- " -L, --lock Prevent simultaneous loads of the same module\n"
- " -m, --map Generate load map (so crashes can be traced)\n"
- " -n, --noload Don't load, just show\n"
- " -p, --probe Probe mode; check if the module matches the kernel\n"
- " -q, --quiet Don't print unresolved symbols\n"
- " -r, --root Allow root to load modules not owned by root\n"
- " -s, --syslog Report errors via syslog\n"
- " -S, --kallsyms Force kallsyms on module\n"
- " -v, --verbose Verbose output\n"
- " -V, --version Show version\n"
- " -x, --noexport Do not export externs\n"
- " -X, --export Do export externs (default)\n"
- " -y, --noksymoops Do not add ksymoops symbols\n"
- " -Y, --ksymoops Do add ksymoops symbols (default)\n"
- " -e persist_name\n"
- " --persist=persist_name Filename to hold any persistent data from the module\n"
- " -o NAME, --name=NAME Set internal module name to NAME\n"
- " -O NAME, --blob=NAME Save the object as a binary blob in NAME\n"
- " -P PREFIX\n"
- " --prefix=PREFIX Prefix for kernel or module symbols\n"
- ,stderr);
- exit(1);
-}
-#endif /* defined(COMMON_3264) && defined(ONLY_32) */
-
-#if defined(COMMON_3264) && defined(ONLY_32)
-#define INSMOD_MAIN insmod_main_32 /* 32 bit version */
-#elif defined(COMMON_3264) && defined(ONLY_64)
-#define INSMOD_MAIN insmod_main_64 /* 64 bit version */
-#else
-#define INSMOD_MAIN insmod_main /* Not common code */
-#endif
-
-int INSMOD_MAIN(int argc, char **argv)
-{
- int k_version;
- int k_crcs;
- char k_strversion[STRVERSIONLEN];
- struct option long_opts[] = {
- {"force", 0, 0, 'f'},
- {"help", 0, 0, 'h'},
- {"autoclean", 0, 0, 'k'},
- {"lock", 0, 0, 'L'},
- {"map", 0, 0, 'm'},
- {"noload", 0, 0, 'n'},
- {"probe", 0, 0, 'p'},
- {"poll", 0, 0, 'p'}, /* poll is deprecated, remove in 2.5 */
- {"quiet", 0, 0, 'q'},
- {"root", 0, 0, 'r'},
- {"syslog", 0, 0, 's'},
- {"kallsyms", 0, 0, 'S'},
- {"verbose", 0, 0, 'v'},
- {"version", 0, 0, 'V'},
- {"noexport", 0, 0, 'x'},
- {"export", 0, 0, 'X'},
- {"noksymoops", 0, 0, 'y'},
- {"ksymoops", 0, 0, 'Y'},
-
- {"persist", 1, 0, 'e'},
- {"name", 1, 0, 'o'},
- {"blob", 1, 0, 'O'},
- {"prefix", 1, 0, 'P'},
- {0, 0, 0, 0}
- };
- char *m_name = NULL;
- char *blob_name = NULL; /* Save object as binary blob */
- int m_version;
- ElfW(Addr) m_addr;
- unsigned long m_size;
- int m_crcs;
- char m_strversion[STRVERSIONLEN];
- char *filename;
- char *persist_name = NULL; /* filename to hold any persistent data */
- int fp;
- struct obj_file *f;
- struct obj_section *kallsyms = NULL, *archdata = NULL;
- int o;
- int noload = 0;
- int dolock = 1; /*Note: was: 0; */
- int quiet = 0;
- int exit_status = 1;
- int force_kallsyms = 0;
- int persist_parms = 0; /* does module have persistent parms? */
- int i;
-
- error_file = "insmod";
-
- /* To handle repeated calls from combined modprobe */
- errors = optind = 0;
-
- /* Process the command line. */
- while ((o = getopt_long(argc, argv, "fhkLmnpqrsSvVxXyYe:o:O:P:R:",
- &long_opts[0], NULL)) != EOF)
- switch (o) {
- case 'f': /* force loading */
- flag_force_load = 1;
- break;
- case 'h': /* Print the usage message. */
- insmod_usage();
- break;
- case 'k': /* module loaded by kerneld, auto-cleanable */
- flag_autoclean = 1;
- break;
- case 'L': /* protect against recursion. */
- dolock = 1;
- break;
- case 'm': /* generate load map */
- flag_load_map = 1;
- break;
- case 'n': /* don't load, just check */
- noload = 1;
- break;
- case 'p': /* silent probe mode */
- flag_silent_probe = 1;
- break;
- case 'q': /* Don't print unresolved symbols */
- quiet = 1;
- break;
- case 'r': /* allow root to load non-root modules */
- root_check_off = !root_check_off;
- break;
- case 's': /* start syslog */
- setsyslog("insmod");
- break;
- case 'S': /* Force kallsyms */
- force_kallsyms = 1;
- break;
- case 'v': /* verbose output */
- flag_verbose = 1;
- break;
- case 'V':
- fputs("insmod version " MODUTILS_VERSION "\n", stderr);
- break;
- case 'x': /* do not export externs */
- flag_export = 0;
- break;
- case 'X': /* do export externs */
- flag_export = 1;
- break;
- case 'y': /* do not define ksymoops symbols */
- flag_ksymoops = 0;
- break;
- case 'Y': /* do define ksymoops symbols */
- flag_ksymoops = 1;
- break;
-
- case 'e': /* persistent data filename */
- free(persist_name);
- persist_name = xstrdup(optarg);
- break;
- case 'o': /* name the output module */
- m_name = optarg;
- break;
- case 'O': /* save the output module object */
- blob_name = optarg;
- break;
- case 'P': /* use prefix on crc */
- set_ncv_prefix(optarg);
- break;
-
- default:
- insmod_usage();
- break;
- }
-
- if (optind >= argc) {
- insmod_usage();
- }
- filename = argv[optind++];
-
- if (config_read(0, NULL, "", NULL) < 0) {
- error("Failed handle configuration");
- }
-
- if (persist_name && !*persist_name &&
- (!persistdir || !*persistdir)) {
- free(persist_name);
- persist_name = NULL;
- if (flag_verbose)
- lprintf("insmod: -e \"\" ignored, no persistdir");
- }
-
- if (m_name == NULL) {
- size_t len;
- char *p;
-
- if ((p = strrchr(filename, '/')) != NULL)
- p++;
- else
- p = filename;
- len = strlen(p);
- if (len > 2 && p[len - 2] == '.' && p[len - 1] == 'o')
- len -= 2;
- else if (len > 4 && p[len - 4] == '.' && p[len - 3] == 'm'
- && p[len - 2] == 'o' && p[len - 1] == 'd')
- len -= 4;
-#ifdef CONFIG_USE_ZLIB
- else if (len > 5 && !strcmp(p + len - 5, ".o.gz"))
- len -= 5;
-#endif
-
- m_name = xmalloc(len + 1);
- memcpy(m_name, p, len);
- m_name[len] = '\0';
- }
-
- /* Locate the file to be loaded. */
- if (!strchr(filename, '/') && !strchr(filename, '.')) {
- char *tmp = search_module_path(filename);
- if (tmp == NULL) {
- error("%s: no module by that name found", filename);
- return 1;
- }
- filename = tmp;
- lprintf("Using %s", filename);
- } else if (flag_verbose)
- lprintf("Using %s", filename);
-
- /* And open it. */
- if ((fp = gzf_open(filename, O_RDONLY)) == -1) {
- error("%s: %m", filename);
- return 1;
- }
- /* Try to prevent multiple simultaneous loads. */
- if (dolock)
- flock(fp, LOCK_EX);
-
- if (!get_kernel_info(K_SYMBOLS))
- goto out;
-
- /*
- * Set the genksyms prefix if this is a versioned kernel
- * and it's not already set.
- */
- set_ncv_prefix(NULL);
-
- for (i = 0; i < n_module_stat; ++i) {
- if (strcmp(module_stat[i].name, m_name) == 0) {
- error("a module named %s already exists", m_name);
- goto out;
- }
- }
-
- error_file = filename;
- if ((f = obj_load(fp, ET_REL, filename)) == NULL)
- goto out;
-
- /* Version correspondence? */
- k_version = get_kernel_version(k_strversion);
- m_version = get_module_version(f, m_strversion);
- if (m_version == -1) {
- error("couldn't find the kernel version the module was compiled for");
- goto out;
- }
-
- k_crcs = is_kernel_checksummed();
- m_crcs = is_module_checksummed(f);
- if ((m_crcs == 0 || k_crcs == 0) &&
- strncmp(k_strversion, m_strversion, STRVERSIONLEN) != 0) {
- if (flag_force_load) {
- lprintf("Warning: kernel-module version mismatch\n"
- "\t%s was compiled for kernel version %s\n"
- "\twhile this kernel is version %s",
- filename, m_strversion, k_strversion);
- } else {
- if (!quiet)
- error("kernel-module version mismatch\n"
- "\t%s was compiled for kernel version %s\n"
- "\twhile this kernel is version %s.",
- filename, m_strversion, k_strversion);
- goto out;
- }
- }
- if (m_crcs != k_crcs)
- obj_set_symbol_compare(f, ncv_strcmp, ncv_symbol_hash);
-
- /* Let the module know about the kernel symbols. */
- add_kernel_symbols(f);
-
- /* Allocate common symbols, symbol tables, and string tables.
- *
- * The calls marked DEPMOD indicate the bits of code that depmod
- * uses to do a pseudo relocation, ignoring undefined symbols.
- * Any changes made to the relocation sequence here should be
- * checked against depmod.
- */
-#ifdef COMPAT_2_0
- if (k_new_syscalls
- ? !create_this_module(f, m_name)
- : !old_create_mod_use_count(f))
- goto out;
-#else
- if (!create_this_module(f, m_name))
- goto out;
-#endif
-
- if (!obj_check_undefineds(f, quiet)) /* DEPMOD, obj_clear_undefineds */
- goto out;
- obj_allocate_commons(f); /* DEPMOD */
-
- check_module_parameters(f, &persist_parms);
-
- if (optind < argc) {
- if (!process_module_arguments(f, argc - optind, argv + optind, 1))
- goto out;
- }
- arch_create_got(f); /* DEPMOD */
- hide_special_symbols(f);
-
- if (persist_parms && persist_name && *persist_name) {
- f->persist = persist_name;
- persist_name = NULL;
- }
-
- if (persist_parms &&
- persist_name && !*persist_name) {
- /* -e "". This is ugly. Take the filename, compare it against
- * each of the module paths until we find a match on the start
- * of the filename, assume the rest is the relative path. Have
- * to do it this way because modprobe uses absolute filenames
- * for module names in modules.dep and the format of modules.dep
- * does not allow for any backwards compatible changes, so there
- * is nowhere to store the relative filename. The only way this
- * should fail to calculate a relative path is "insmod ./xxx", for
- * that case the user has to specify -e filename.
- */
- int j, l = strlen(filename);
- char *relative = NULL;
- char *p;
- for (i = 0; i < nmodpath; ++i) {
- p = modpath[i].path;
- j = strlen(p);
- while (j && p[j] == '/')
- --j;
- if (j < l && strncmp(filename, p, j) == 0 && filename[j] == '/') {
- while (filename[j] == '/')
- ++j;
- relative = xstrdup(filename+j);
- break;
- }
- }
- if (relative) {
- i = strlen(relative);
- if (i > 3 && strcmp(relative+i-3, ".gz") == 0)
- relative[i -= 3] = '\0';
- if (i > 2 && strcmp(relative+i-2, ".o") == 0)
- relative[i -= 2] = '\0';
- else if (i > 4 && strcmp(relative+i-4, ".mod") == 0)
- relative[i -= 4] = '\0';
- f->persist = xmalloc(strlen(persistdir) + 1 + i + 1);
- strcpy(f->persist, persistdir); /* safe, xmalloc */
- strcat(f->persist, "/"); /* safe, xmalloc */
- strcat(f->persist, relative); /* safe, xmalloc */
- free(relative);
- }
- else
- error("Cannot calculate persistent filename");
- }
-
- if (f->persist && *(f->persist) != '/') {
- error("Persistent filenames must be absolute, ignoring '%s'",
- f->persist);
- free(f->persist);
- f->persist = NULL;
- }
-
- if (f->persist && !flag_ksymoops) {
- error("has persistent data but ksymoops symbols are not available");
- free(f->persist);
- f->persist = NULL;
- }
-
- if (f->persist && !k_new_syscalls) {
- error("has persistent data but the kernel is too old to support it");
- free(f->persist);
- f->persist = NULL;
- }
-
- if (persist_parms && flag_verbose) {
- if (f->persist)
- lprintf("Persist filename '%s'", f->persist);
- else
- lprintf("No persistent filename available");
- }
-
- if (f->persist) {
- FILE *fp = fopen(f->persist, "r");
- if (!fp) {
- if (flag_verbose)
- lprintf("Cannot open persist file '%s' %m", f->persist);
- }
- else {
- int pargc = 0;
- char *pargv[1000]; /* hard coded but big enough */
- char line[3000]; /* hard coded but big enough */
- char *p;
- while (fgets(line, sizeof(line), fp)) {
- p = strchr(line, '\n');
- if (!p) {
- error("Persistent data line is too long\n%s", line);
- break;
- }
- *p = '\0';
- p = line;
- while (isspace(*p))
- ++p;
- if (!*p || *p == '#')
- continue;
- if (pargc == sizeof(pargv)/sizeof(pargv[0])) {
- error("More than %d persistent parameters", pargc);
- break;
- }
- pargv[pargc++] = xstrdup(p);
- }
- fclose(fp);
- if (!process_module_arguments(f, pargc, pargv, 0))
- goto out;
- while (pargc--)
- free(pargv[pargc]);
- }
- }
-
- if (flag_ksymoops)
- add_ksymoops_symbols(f, filename, m_name);
-
- if (k_new_syscalls)
- create_module_ksymtab(f);
-
- /* archdata based on relocatable addresses */
- if (add_archdata(f, &archdata))
- goto out;
-
- /* kallsyms based on relocatable addresses */
- if (add_kallsyms(f, &kallsyms, force_kallsyms))
- goto out;
- /**** No symbols or sections to be changed after kallsyms above ***/
-
- if (errors)
- goto out;
-
- /* If we were just checking, we made it. */
- if (flag_silent_probe) {
- exit_status = 0;
- goto out;
- }
- /* Module has now finished growing; find its size and install it. */
- m_size = obj_load_size(f); /* DEPMOD */
-
- if (noload) {
- /* Don't bother actually touching the kernel. */
- m_addr = 0x12340000;
- } else {
- errno = 0;
- m_addr = create_module(m_name, m_size);
- switch (errno) {
- case 0:
- break;
- case EEXIST:
- if (dolock) {
- /*
- * Assume that we were just invoked
- * simultaneous with another insmod
- * and return success.
- */
- exit_status = 0;
- goto out;
- }
- error("a module named %s already exists", m_name);
- goto out;
- case ENOMEM:
- error("can't allocate kernel memory for module; needed %lu bytes",
- m_size);
- goto out;
- default:
- error("create_module: %m");
- goto out;
- }
- }
-
- /* module is already built, complete with ksymoops symbols for the
- * persistent filename. If the kernel does not support persistent data
- * then give an error but continue. It is too difficult to clean up at
- * this stage and this error will only occur on backported modules.
- * rmmod will also get an error so warn the user now.
- */
- if (f->persist && !noload) {
- struct {
- struct module m;
- int data;
- } test_read;
- memset(&test_read, 0, sizeof(test_read));
- test_read.m.size_of_struct = -sizeof(test_read.m); /* -ve size => read, not write */
- test_read.m.read_start = m_addr + sizeof(struct module);
- test_read.m.read_end = test_read.m.read_start + sizeof(test_read.data);
- if (sys_init_module(m_name, (struct module *) &test_read)) {
- int old_errors = errors;
- error("has persistent data but the kernel is too old to support it."
- " Expect errors during rmmod as well");
- errors = old_errors;
- }
- }
-
- if (!obj_relocate(f, m_addr)) { /* DEPMOD */
- if (!noload)
- delete_module(m_name);
- goto out;
- }
-
- /* Do archdata again, this time we have the final addresses */
- if (add_archdata(f, &archdata))
- goto out;
-
- /* Do kallsyms again, this time we have the final addresses */
- if (add_kallsyms(f, &kallsyms, force_kallsyms))
- goto out;
-
-#ifdef COMPAT_2_0
- if (k_new_syscalls)
- init_module(m_name, f, m_size, blob_name, noload, flag_load_map);
- else if (!noload)
- old_init_module(m_name, f, m_size);
-#else
- init_module(m_name, f, m_size, blob_name, noload, flag_load_map);
-#endif
- if (errors) {
- if (!noload)
- delete_module(m_name);
- goto out;
- }
- exit_status = 0;
-
- out:
- if (dolock)
- flock(fp, LOCK_UN);
- close(fp);
- if (!noload)
- snap_shot(NULL, 0);
-
- return exit_status;
-}
-
-/* For common 3264 code, add an overall insmod_main, in the 64 bit version. */
-#if defined(COMMON_3264) && defined(ONLY_64)
-int insmod_main(int argc, char **argv)
-{
- if (arch64())
- return insmod_main_64(argc, argv);
- else
- return insmod_main_32(argc, argv);
-}
-#endif /* defined(COMMON_3264) && defined(ONLY_64) */
-
-
-
-int insmod_call(char * full_filename, char * params)
-{
- int argc = 2;
- char *argv[50];
- char * ptr = params;
- argv[0] = "stage1";
- argv[1] = full_filename;
-
- while (ptr != NULL) {
- argv[argc] = ptr;
- argc++;
- ptr = strchr(ptr, ' ');
- if (ptr) {
- ptr[0] = '\0';
- ptr++;
- }
- }
-
- return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-modutils/obj/Makefile b/mdk-stage1/insmod-modutils/obj/Makefile
deleted file mode 100644
index 34b5df2d9..000000000
--- a/mdk-stage1/insmod-modutils/obj/Makefile
+++ /dev/null
@@ -1,33 +0,0 @@
- #******************************************************************************
- #
- # insmod from modutils (generic)
- #
- # $Id$
- #
- # Copyright 1996, 1997 Linux International.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-all: libobj.a
-
-clean:
- rm -f *.o *.a
-
-
-INCS = -I./../include
-
-DEFS = -D_GNU_SOURCE -DELF_MACHINE_H='"elf_$(ARCH).h"' -DARCH_$(ARCH) -DCONFIG_ROOT_CHECK_OFF=0
-
-OBJS = obj_kallsyms.o obj_common.o obj_load.o obj_reloc.o obj_$(ARCH).o
-
-libobj.a: $(OBJS)
- ar cru $@ $^
- ranlib $@
-
-.c.o:
- gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $<
diff --git a/mdk-stage1/insmod-modutils/obj/obj_alpha.c b/mdk-stage1/insmod-modutils/obj/obj_alpha.c
deleted file mode 100644
index 4006b3442..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_alpha.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/* Alpha specific support for Elf loading and relocation.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-/*======================================================================*/
-
-struct alpha_got_entry
-{
- struct alpha_got_entry *next;
- ElfW(Addr) addend;
- int offset;
- int reloc_done;
-};
-
-struct alpha_file
-{
- struct obj_file root;
- struct obj_section *got;
-};
-
-struct alpha_symbol
-{
- struct obj_symbol root;
- struct alpha_got_entry *got_entries;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- struct alpha_file *f;
- f = xmalloc(sizeof(*f));
- f->got = NULL;
- return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- struct alpha_symbol *sym;
- sym = xmalloc(sizeof(*sym));
- sym->got_entries = NULL;
- return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- /* Assume it's just a debugging section that we can safely
- ignore ... */
- sec->contents = NULL;
-
- return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf64_Rela *rel,
- Elf64_Addr v)
-{
- struct alpha_file *af = (struct alpha_file *)f;
- struct alpha_symbol *asym = (struct alpha_symbol *)sym;
-
- unsigned long *lloc = (unsigned long *)(targsec->contents + rel->r_offset);
- unsigned int *iloc = (unsigned int *)lloc;
- Elf64_Addr dot = targsec->header.sh_addr + rel->r_offset;
- Elf64_Addr gp = af->got->header.sh_addr + 0x8000;
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (ELF64_R_TYPE(rel->r_info))
- {
- case R_ALPHA_NONE:
- case R_ALPHA_LITUSE:
- break;
-
- case R_ALPHA_REFQUAD:
- *lloc += v;
- break;
-
- case R_ALPHA_GPREL32:
- v -= gp;
- if ((Elf64_Sxword)v > 0x7fffffff
- || (Elf64_Sxword)v < -(Elf64_Sxword)0x80000000)
- ret = obj_reloc_overflow;
- *iloc = v;
- break;
-
- case R_ALPHA_LITERAL:
- {
- struct alpha_got_entry *gotent;
-
- assert(asym != NULL);
- gotent = asym->got_entries;
- while (gotent->addend != rel->r_addend)
- gotent = gotent->next;
-
- if (!gotent->reloc_done)
- {
- *(unsigned long *)(af->got->contents + gotent->offset) = v;
- gotent->reloc_done = 1;
- }
-
- *iloc = (*iloc & ~0xffff) | ((gotent->offset - 0x8000) & 0xffff);
- }
- break;
-
- case R_ALPHA_GPDISP:
- {
- unsigned int *p_ldah, *p_lda;
- unsigned int i_ldah, i_lda, hi, lo;
-
- p_ldah = iloc;
- p_lda = (unsigned int *)((char *)iloc + rel->r_addend);
- i_ldah = *p_ldah;
- i_lda = *p_lda;
-
- /* Make sure the instructions are righteous. */
- if ((i_ldah >> 26) != 9 || (i_lda >> 26) != 8)
- ret = obj_reloc_dangerous;
-
- /* Extract the existing addend. */
- v = (i_ldah & 0xffff) << 16 | (i_lda & 0xffff);
- v = (v ^ 0x80008000) - 0x80008000;
-
- v += gp - dot;
-
- if ((Elf64_Sxword)v >= 0x7fff8000
- || (Elf64_Sxword)v < -(Elf64_Sxword)0x80000000)
- ret = obj_reloc_overflow;
-
- /* Modify the instructions and finish up. */
- lo = v & 0xffff;
- hi = ((v >> 16) + ((v >> 15) & 1)) & 0xffff;
-
- *p_ldah = (i_ldah & 0xffff0000) | hi;
- *p_lda = (i_lda & 0xffff0000) | lo;
- }
- break;
-
- case R_ALPHA_BRADDR:
- v -= dot + 4;
- if (v % 4)
- ret = obj_reloc_dangerous;
- else if ((Elf64_Sxword)v > 0x3fffff
- || (Elf64_Sxword)v < -(Elf64_Sxword)0x400000)
- ret = obj_reloc_overflow;
- v /= 4;
-
- *iloc = (*iloc & ~0x1fffff) | (v & 0x1fffff);
- break;
-
- case R_ALPHA_HINT:
- v -= dot + 4;
- if (v % 4)
- ret = obj_reloc_dangerous;
- v /= 4;
-
- *iloc = (*iloc & ~0x3fff) | (v & 0x3fff);
- break;
-
- default:
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
- struct alpha_file *af = (struct alpha_file *)f;
- int i, n, offset = 0;
-
- n = af->root.header.e_shnum;
- for (i = 0; i < n; ++i)
- {
- struct obj_section *relsec, *symsec, *strsec;
- Elf64_Rela *rel, *relend;
- Elf64_Sym *symtab;
- const char *strtab;
-
- relsec = af->root.sections[i];
- if (relsec->header.sh_type != SHT_RELA)
- continue;
-
- symsec = af->root.sections[relsec->header.sh_link];
- strsec = af->root.sections[symsec->header.sh_link];
-
- rel = (Elf64_Rela *)relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(Elf64_Rela));
- symtab = (Elf64_Sym *)symsec->contents;
- strtab = (const char *)strsec->contents;
-
- for (; rel < relend; ++rel)
- {
- struct alpha_got_entry *ent;
- Elf64_Sym *extsym;
- struct alpha_symbol *intsym;
- const char *name;
-
- if (ELF64_R_TYPE(rel->r_info) != R_ALPHA_LITERAL)
- continue;
-
- extsym = &symtab[ELF64_R_SYM(rel->r_info)];
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym = (struct alpha_symbol *)obj_find_symbol(&af->root, name);
-
- for (ent = intsym->got_entries; ent ; ent = ent->next)
- if (ent->addend == rel->r_addend)
- goto found;
-
- ent = xmalloc(sizeof(*ent));
- ent->addend = rel->r_addend;
- ent->offset = offset;
- ent->reloc_done = 0;
- ent->next = intsym->got_entries;
- intsym->got_entries = ent;
- offset += 8;
-
- found:;
- }
- }
-
- if (offset > 0x10000)
- {
- error(".got section overflow: %#x > 0x10000", offset);
- return 0;
- }
-
- /* We always want a .got section so that we always have a GP for
- use with GPDISP and GPREL32 relocs. Besides, if the section
- is empty we don't use up space anyway. */
- af->got = obj_create_alloced_section(&af->root, ".got", 8, offset);
-
- return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- struct alpha_file *af = (struct alpha_file *)f;
-
- mod->gp = af->got->header.sh_addr + 0x8000;
-
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_arm.c b/mdk-stage1/insmod-modutils/obj/obj_arm.c
deleted file mode 100644
index 7a843f947..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_arm.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/* ARM specific support for Elf loading and relocation.
- Copyright 1996, 1997, 1998 Linux International.
-
- Contributed by Phil Blundell <philb@gnu.org>
- and wms <woody@corelcomputer.com>
- based on the i386 code by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct arm_plt_entry
-{
- int offset;
- int allocated:1;
- int inited:1; // has been set up
-};
-
-struct arm_got_entry
-{
- int offset;
- int allocated : 1;
- unsigned reloc_done : 1;
-};
-
-struct arm_file
-{
- struct obj_file root;
- struct obj_section *plt;
- struct obj_section *got;
-};
-
-struct arm_symbol
-{
- struct obj_symbol root;
- struct arm_plt_entry pltent;
- struct arm_got_entry gotent;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- struct arm_file *f;
- f = xmalloc(sizeof(*f));
- f->got = NULL;
- return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- struct arm_symbol *sym;
- sym = xmalloc(sizeof(*sym));
- memset(&sym->gotent, 0, sizeof(sym->gotent));
- memset(&sym->pltent, 0, sizeof(sym->pltent));
- return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- /* Assume it's just a debugging section that we can safely
- ignore ... */
- sec->contents = NULL;
-
- return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf32_Rel *rel,
- Elf32_Addr v)
-{
- struct arm_file *afile = (struct arm_file *)f;
- struct arm_symbol *asym = (struct arm_symbol *)sym;
-
- Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
- Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
- Elf32_Addr got = afile->got ? afile->got->header.sh_addr : 0;
- Elf32_Addr plt = afile->plt ? afile->plt->header.sh_addr : 0;
-
- struct arm_plt_entry *pe;
- unsigned long *ip;
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- case R_ARM_NONE:
- break;
-
- case R_ARM_ABS32:
- *loc += v;
- break;
-
- case R_ARM_GOT32:
- /* needs an entry in the .got: set it, once */
- if (! asym->gotent.reloc_done)
- {
- asym->gotent.reloc_done = 1;
- *(Elf32_Addr *)(afile->got->contents + asym->gotent.offset) = v;
- }
- /* make the reloc with_respect_to_.got */
- *loc += asym->gotent.offset;
- break;
-
- /* relative reloc, always to _GLOBAL_OFFSET_TABLE_ (which is .got)
- similar to branch, but is full 32 bits relative */
- case R_ARM_GOTPC:
- assert(got);
- *loc += got - dot;
- break;
-
- case R_ARM_PC24:
- case R_ARM_PLT32:
- /* find the plt entry and initialize it if necessary */
- assert(asym != NULL);
- pe = (struct arm_plt_entry*) &asym->pltent;
- if (! pe->inited)
- {
- ip = (unsigned long *) (afile->plt->contents + pe->offset);
- ip[0] = 0xe51ff004; /* ldr pc,[pc,#-4] */
- ip[1] = v; /* sym@ */
- pe->inited = 1;
- }
-
- /* relative distance to target */
- v -= dot;
- /* if the target is too far away.... */
- if ((int)v < -0x02000000 || (int)v >= 0x02000000)
- {
- /* go via the plt */
- v = plt + pe->offset - dot;
- }
- if (v & 3)
- ret = obj_reloc_dangerous;
-
- /* Convert to words. */
- v >>= 2;
-
- /* merge the offset into the instruction. */
- *loc = (*loc & ~0x00ffffff) | ((v + *loc) & 0x00ffffff);
- break;
-
- /* address relative to the got */
- case R_ARM_GOTOFF:
- assert(got);
- *loc += v - got;
- break;
-
- default:
- printf("Warning: unhandled reloc %d\n",ELF32_R_TYPE(rel->r_info));
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
- struct arm_file *afile = (struct arm_file *) f;
- int i;
- struct obj_section *sec, *syms, *strs;
- ElfW(Rel) *rel, *relend;
- ElfW(Sym) *symtab, *extsym;
- const char *strtab, *name;
- struct arm_symbol *intsym;
- struct arm_plt_entry *pe;
- struct arm_got_entry *ge;
- int got_offset = 0, plt_offset = 0;
-
- for (i = 0; i < f->header.e_shnum; ++i)
- {
- sec = f->sections[i];
- if (sec->header.sh_type != SHT_RELM)
- continue;
- syms = f->sections[sec->header.sh_link];
- strs = f->sections[syms->header.sh_link];
-
- rel = (ElfW(RelM) *) sec->contents;
- relend = rel + (sec->header.sh_size / sizeof(ElfW(RelM)));
- symtab = (ElfW(Sym) *) syms->contents;
- strtab = (const char *) strs->contents;
-
- for (; rel < relend; ++rel)
- {
- extsym = &symtab[ELF32_R_SYM(rel->r_info)];
-
- switch(ELF32_R_TYPE(rel->r_info)) {
- case R_ARM_PC24:
- case R_ARM_PLT32:
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym = (struct arm_symbol *) obj_find_symbol(f, name);
-
- pe = &intsym->pltent;
-
- if (! pe->allocated)
- {
- pe->allocated = 1;
- pe->offset = plt_offset;
- plt_offset += 8;
- pe->inited = 0;
- }
- break;
-
- /* these two don_t need got entries, but they need
- the .got to exist */
- case R_ARM_GOTOFF:
- case R_ARM_GOTPC:
- if (got_offset==0) got_offset = 4;
- break;
-
- case R_ARM_GOT32:
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym = (struct arm_symbol *) obj_find_symbol(f, name);
-
- ge = (struct arm_got_entry *) &intsym->gotent;
- if (! ge->allocated)
- {
- ge->allocated = 1;
- ge->offset = got_offset;
- got_offset += sizeof(void*);
- }
- break;
-
- default:
- continue;
- }
- }
- }
-
- /* if there was a _GLOBAL_OFFSET_TABLE_, then the .got section
- exists already; find it and use it */
- if (got_offset)
- {
- struct obj_section* sec = obj_find_section(f, ".got");
- if (sec)
- obj_extend_section(sec, got_offset);
- else
- {
- sec = obj_create_alloced_section(f, ".got", 8, got_offset);
- assert(sec);
- }
- afile->got = sec;
- }
-
- if (plt_offset)
- afile->plt = obj_create_alloced_section(f, ".plt", 8, plt_offset);
-
- return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_common.c b/mdk-stage1/insmod-modutils/obj/obj_common.c
deleted file mode 100644
index 2a6606c94..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_common.c
+++ /dev/null
@@ -1,399 +0,0 @@
-/* Elf file, section, and symbol manipulation routines.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-
-#include <obj.h>
-#include <util.h>
-#include <module.h>
-
-/*======================================================================*/
-
-/* Standard ELF hash function. */
-inline unsigned long
-obj_elf_hash_n(const char *name, unsigned long n)
-{
- unsigned long h = 0;
- unsigned long g;
- unsigned char ch;
-
- while (n > 0)
- {
- ch = *name++;
- h = (h << 4) + ch;
- if ((g = (h & 0xf0000000)) != 0)
- {
- h ^= g >> 24;
- h &= ~g;
- }
- n--;
- }
- return h;
-}
-
-unsigned long
-obj_elf_hash (const char *name)
-{
- return obj_elf_hash_n(name, strlen(name));
-}
-
-void
-obj_set_symbol_compare (struct obj_file *f,
- int (*cmp)(const char *, const char *),
- unsigned long (*hash)(const char *))
-{
- if (cmp)
- f->symbol_cmp = cmp;
- if (hash)
- {
- struct obj_symbol *tmptab[HASH_BUCKETS], *sym, *next;
- int i;
-
- f->symbol_hash = hash;
-
- memcpy(tmptab, f->symtab, sizeof(tmptab));
- memset(f->symtab, 0, sizeof(f->symtab));
-
- for (i = 0; i < HASH_BUCKETS; ++i)
- for (sym = tmptab[i]; sym ; sym = next)
- {
- unsigned long h = hash(sym->name) % HASH_BUCKETS;
- next = sym->next;
- sym->next = f->symtab[h];
- f->symtab[h] = sym;
- }
- }
-}
-
-struct obj_symbol *
-obj_add_symbol (struct obj_file *f, const char *name, unsigned long symidx,
- int info, int secidx, ElfW(Addr) value, unsigned long size)
-{
- struct obj_symbol *sym;
- unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
- int n_type = ELFW(ST_TYPE)(info);
- int n_binding = ELFW(ST_BIND)(info);
-
- for (sym = f->symtab[hash]; sym; sym = sym->next)
- if (f->symbol_cmp(sym->name, name) == 0)
- {
- int o_secidx = sym->secidx;
- int o_info = sym->info;
- int o_type = ELFW(ST_TYPE)(o_info);
- int o_binding = ELFW(ST_BIND)(o_info);
-
- /* A redefinition! Is it legal? */
-
- if (secidx == SHN_UNDEF)
- return sym;
- else if (o_secidx == SHN_UNDEF)
- goto found;
- else if (n_binding == STB_GLOBAL && o_binding == STB_LOCAL)
- {
- /* Cope with local and global symbols of the same name
- in the same object file, as might have been created
- by ld -r. The only reason locals are now seen at this
- level at all is so that we can do semi-sensible things
- with parameters. */
-
- struct obj_symbol *nsym, **p;
-
- nsym = arch_new_symbol();
- nsym->next = sym->next;
- nsym->ksymidx = -1;
-
- /* Excise the old (local) symbol from the hash chain. */
- for (p = &f->symtab[hash]; *p != sym; p = &(*p)->next)
- continue;
- *p = sym = nsym;
- goto found;
- }
- else if (n_binding == STB_LOCAL)
- {
- /* Another symbol of the same name has already been defined.
- Just add this to the local table. */
- sym = arch_new_symbol();
- sym->next = NULL;
- sym->ksymidx = -1;
- f->local_symtab[symidx] = sym;
- goto found;
- }
- else if (n_binding == STB_WEAK)
- return sym;
- else if (o_binding == STB_WEAK)
- goto found;
- /* Don't unify COMMON symbols with object types the programmer
- doesn't expect. */
- else if (secidx == SHN_COMMON
- && (o_type == STT_NOTYPE || o_type == STT_OBJECT))
- return sym;
- else if (o_secidx == SHN_COMMON
- && (n_type == STT_NOTYPE || n_type == STT_OBJECT))
- goto found;
- else
- {
- /* Don't report an error if the symbol is coming from
- the kernel or some external module. */
- if (secidx <= SHN_HIRESERVE)
- error("%s multiply defined", name);
- return sym;
- }
- }
-
- /* Completely new symbol. */
- sym = arch_new_symbol();
- sym->next = f->symtab[hash];
- f->symtab[hash] = sym;
- sym->ksymidx = -1;
-
- if (ELFW(ST_BIND)(info) == STB_LOCAL && symidx != -1) {
- if (symidx >= f->local_symtab_size)
- error("local symbol %s with index %ld exceeds local_symtab_size %ld",
- name, (long) symidx, (long) f->local_symtab_size);
- else
- f->local_symtab[symidx] = sym;
- }
-
-found:
- sym->name = name;
- sym->value = value;
- sym->size = size;
- sym->secidx = secidx;
- sym->info = info;
- sym->r_type = 0; /* should be R_arch_NONE for all arch */
-
- return sym;
-}
-
-struct obj_symbol *
-obj_find_symbol (struct obj_file *f, const char *name)
-{
- struct obj_symbol *sym;
- unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-
- for (sym = f->symtab[hash]; sym; sym = sym->next)
- if (f->symbol_cmp(sym->name, name) == 0)
- return sym;
-
- return NULL;
-}
-
-ElfW(Addr)
-obj_symbol_final_value (struct obj_file *f, struct obj_symbol *sym)
-{
- if (sym)
- {
- if (sym->secidx >= SHN_LORESERVE)
- return sym->value;
-
- return sym->value + f->sections[sym->secidx]->header.sh_addr;
- }
- else
- {
- /* As a special case, a NULL sym has value zero. */
- return 0;
- }
-}
-
-struct obj_section *
-obj_find_section (struct obj_file *f, const char *name)
-{
- int i, n = f->header.e_shnum;
-
- for (i = 0; i < n; ++i)
- if (strcmp(f->sections[i]->name, name) == 0)
- return f->sections[i];
-
- return NULL;
-}
-
-static int
-obj_load_order_prio(struct obj_section *a)
-{
- unsigned long af, ac;
-
- af = a->header.sh_flags;
-
- ac = 0;
- if (a->name[0] != '.' || strlen(a->name) != 10 ||
- strcmp(a->name + 5, ".init")) ac |= 32;
- if (af & SHF_ALLOC) ac |= 16;
- if (!(af & SHF_WRITE)) ac |= 8;
- if (af & SHF_EXECINSTR) ac |= 4;
- if (a->header.sh_type != SHT_NOBITS) ac |= 2;
-#if defined(ARCH_ia64)
- if (af & SHF_IA_64_SHORT) ac -= 1;
-#endif
-
- return ac;
-}
-
-void
-obj_insert_section_load_order (struct obj_file *f, struct obj_section *sec)
-{
- struct obj_section **p;
- int prio = obj_load_order_prio(sec);
- for (p = f->load_order_search_start; *p ; p = &(*p)->load_next)
- if (obj_load_order_prio(*p) < prio)
- break;
- sec->load_next = *p;
- *p = sec;
-}
-
-struct obj_section *
-obj_create_alloced_section (struct obj_file *f, const char *name,
- unsigned long align, unsigned long size)
-{
- int newidx = f->header.e_shnum++;
- struct obj_section *sec;
-
- f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
- f->sections[newidx] = sec = arch_new_section();
-
- memset(sec, 0, sizeof(*sec));
- sec->header.sh_type = SHT_PROGBITS;
- sec->header.sh_flags = SHF_WRITE|SHF_ALLOC;
- sec->header.sh_size = size;
- sec->header.sh_addralign = align;
- sec->name = name;
- sec->idx = newidx;
- if (size)
- sec->contents = xmalloc(size);
-
- obj_insert_section_load_order(f, sec);
-
- return sec;
-}
-
-struct obj_section *
-obj_create_alloced_section_first (struct obj_file *f, const char *name,
- unsigned long align, unsigned long size)
-{
- int newidx = f->header.e_shnum++;
- struct obj_section *sec;
-
- f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
- f->sections[newidx] = sec = arch_new_section();
-
- memset(sec, 0, sizeof(*sec));
- sec->header.sh_type = SHT_PROGBITS;
- sec->header.sh_flags = SHF_WRITE|SHF_ALLOC;
- sec->header.sh_size = size;
- sec->header.sh_addralign = align;
- sec->name = name;
- sec->idx = newidx;
- if (size)
- sec->contents = xmalloc(size);
-
- sec->load_next = f->load_order;
- f->load_order = sec;
- if (f->load_order_search_start == &f->load_order)
- f->load_order_search_start = &sec->load_next;
-
- return sec;
-}
-
-void *
-obj_extend_section (struct obj_section *sec, unsigned long more)
-{
- unsigned long oldsize = sec->header.sh_size;
- sec->contents = xrealloc(sec->contents, sec->header.sh_size += more);
- return sec->contents + oldsize;
-}
-
-/* Convert an object pointer (address) to a native pointer and vice versa.
- * It gets interesting when the object has 64 bit pointers but modutils
- * is running 32 bit. This is nasty code but it stops the compiler giving
- * spurious warning messages. "I know what I am doing" ...
- */
-
-void *
-obj_addr_to_native_ptr (ElfW(Addr) addr)
-{
- unsigned int convert = (sizeof(void *) << 8) + sizeof(addr); /* to, from */
- union obj_ptr_4 p4;
- union obj_ptr_8 p8;
- switch (convert) {
- case 0x0404:
- p4.addr = addr;
- return(p4.ptr);
- break;
- case 0x0408:
- p4.addr = addr;
- if (p4.addr != addr) {
- error("obj_addr_to_native_ptr truncation %" tgt_long_fmt "x",
- (tgt_long) addr);
- exit(1);
- }
- return(p4.ptr);
- break;
- case 0x0804:
- p8.addr = addr;
- return(p8.ptr);
- break;
- case 0x0808:
- p8.addr = addr;
- return(p8.ptr);
- break;
- default:
- error("obj_addr_to_native_ptr unknown conversion 0x%04x", convert);
- exit(1);
- }
-}
-
-ElfW(Addr)
-obj_native_ptr_to_addr (void *ptr)
-{
- unsigned int convert = (sizeof(ElfW(Addr)) << 8) + sizeof(ptr); /* to, from */
- union obj_ptr_4 p4;
- union obj_ptr_8 p8;
- switch (convert) {
- case 0x0404:
- p4.ptr = ptr;
- return(p4.addr);
- break;
- case 0x0408:
- p8.ptr = ptr;
- p4.addr = p8.addr;
- if (p4.addr != p8.addr) {
- error("obj_native_ptr_to_addr truncation %" tgt_long_fmt "x",
- (tgt_long) p8.addr);
- exit(1);
- }
- return(p4.addr);
- break;
- case 0x0804:
- p4.ptr = ptr;
- return(p4.addr); /* compiler expands to 8 */
- break;
- case 0x0808:
- p8.ptr = ptr;
- return(p8.addr);
- break;
- default:
- error("obj_native_ptr_to_addr unknown conversion 0x%04x", convert);
- exit(1);
- }
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_hppa.c b/mdk-stage1/insmod-modutils/obj/obj_hppa.c
deleted file mode 100644
index 4207e692e..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_hppa.c
+++ /dev/null
@@ -1,668 +0,0 @@
-/*
- * PA-RISC specific support for Elf loading and relocation.
- * Copyright 2000 David Huggins-Daines <dhd@linuxcare.com>, Linuxcare Inc.
- * Copyright 2000 Richard Hirst <rhirst@linuxcare.com>, Linuxcare Inc.
- *
- * Based on the IA-64 support, which is:
- * Copyright 2000 Mike Stephens <mike.stephens@intel.com>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-#include <modstat.h> /* For ksyms */
-
-
-typedef struct _hppa_stub_t
-{
- struct _hppa_stub_t *next;
- int offset;
- int reloc_done;
-} hppa_stub_t;
-
-typedef struct _hppa_symbol_t
-{
- struct obj_symbol root;
- hppa_stub_t *stub;
-} hppa_symbol_t;
-
-typedef struct _hppa_file_t
-{
- struct obj_file root;
- struct obj_section *stub;
- Elf32_Addr dp;
-} hppa_file_t;
-
-/* The ABI defines various more esoteric types, but these are the only
- ones we actually need. */
-enum hppa_fsel
-{
- e_fsel,
- e_lsel,
- e_rsel,
- e_lrsel,
- e_rrsel
-};
-
-/* This could be a call to obj_create_alloced_section() followed
- * by an overwrite of sec->header.sh_flags.
- */
-
-struct obj_section *
-obj_hppa_create_alloced_section (struct obj_file *f, const char *name,
- unsigned long align, unsigned long size,
- unsigned long sh_flags)
-{
- int newidx = f->header.e_shnum++;
- struct obj_section *sec;
-
- f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
- f->sections[newidx] = sec = arch_new_section();
-
- memset(sec, 0, sizeof(*sec));
- sec->header.sh_type = SHT_PROGBITS;
- sec->header.sh_flags = sh_flags;
- sec->header.sh_size = size;
- sec->header.sh_addralign = align;
- sec->name = name;
- sec->idx = newidx;
- if (size)
- sec->contents = xmalloc(size);
-
- obj_insert_section_load_order(f, sec);
-
- return sec;
-}
-
-struct obj_file *
-arch_new_file (void)
-{
- hppa_file_t *f;
- f = xmalloc(sizeof(*f));
- f->stub = NULL;
- return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- hppa_symbol_t *sym;
- sym = xmalloc(sizeof(*sym));
- sym->stub = NULL;
- return &sym->root;
-}
-
-/* This is called for architecture specific sections we might need to
- do special things to. */
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- /* Assume it's just a debugging section that we can safely
- ignore ... */
- sec->contents = NULL;
-
- return 0;
-}
-
-/* =================================================================
-
- These functions are from libhppa.h in the GNU BFD library.
- (c) 1990, 91, 92, 93, 94, 95, 96, 98, 99, 2000
- Free Software Foundation, Inc.
-
- ================================================================= */
-
-/* The *sign_extend functions are used to assemble various bitfields
- taken from an instruction and return the resulting immediate
- value. */
-
-static inline int
-sign_extend (x, len)
- int x, len;
-{
- int signbit = (1 << (len - 1));
- int mask = (signbit << 1) - 1;
- return ((x & mask) ^ signbit) - signbit;
-}
-
-static inline int
-low_sign_extend (x, len)
- int x, len;
-{
- return (x >> 1) - ((x & 1) << (len - 1));
-}
-
-
-/* The re_assemble_* functions prepare an immediate value for
- insertion into an opcode. pa-risc uses all sorts of weird bitfields
- in the instruction to hold the value. */
-
-static inline int
-sign_unext (x, len)
- int x, len;
-{
- int len_ones;
-
- len_ones = (1 << len) - 1;
-
- return x & len_ones;
-}
-
-static inline int
-low_sign_unext (x, len)
- int x, len;
-{
- int temp;
- int sign;
-
- sign = (x >> (len-1)) & 1;
-
- temp = sign_unext (x, len-1);
-
- return (temp << 1) | sign;
-}
-
-static inline int
-re_assemble_3 (as3)
- int as3;
-{
- return (( (as3 & 4) << (13-2))
- | ((as3 & 3) << (13+1)));
-}
-
-static inline int
-re_assemble_12 (as12)
- int as12;
-{
- return (( (as12 & 0x800) >> 11)
- | ((as12 & 0x400) >> (10 - 2))
- | ((as12 & 0x3ff) << (1 + 2)));
-}
-
-static inline int
-re_assemble_14 (as14)
- int as14;
-{
- return (( (as14 & 0x1fff) << 1)
- | ((as14 & 0x2000) >> 13));
-}
-
-static inline int
-re_assemble_16 (as16)
- int as16;
-{
- int s, t;
-
- /* Unusual 16-bit encoding, for wide mode only. */
- t = (as16 << 1) & 0xffff;
- s = (as16 & 0x8000);
- return (t ^ s ^ (s >> 1)) | (s >> 15);
-}
-
-static inline int
-re_assemble_17 (as17)
- int as17;
-{
- return (( (as17 & 0x10000) >> 16)
- | ((as17 & 0x0f800) << (16 - 11))
- | ((as17 & 0x00400) >> (10 - 2))
- | ((as17 & 0x003ff) << (1 + 2)));
-}
-
-static inline int
-re_assemble_21 (as21)
- int as21;
-{
- return (( (as21 & 0x100000) >> 20)
- | ((as21 & 0x0ffe00) >> 8)
- | ((as21 & 0x000180) << 7)
- | ((as21 & 0x00007c) << 14)
- | ((as21 & 0x000003) << 12));
-}
-
-static inline int
-re_assemble_22 (as22)
- int as22;
-{
- return (( (as22 & 0x200000) >> 21)
- | ((as22 & 0x1f0000) << (21 - 16))
- | ((as22 & 0x00f800) << (16 - 11))
- | ((as22 & 0x000400) >> (10 - 2))
- | ((as22 & 0x0003ff) << (1 + 2)));
-}
-
-
-/* Handle field selectors for PA instructions.
- The L and R (and LS, RS etc.) selectors are used in pairs to form a
- full 32 bit address. eg.
-
- LDIL L'start,%r1 ; put left part into r1
- LDW R'start(%r1),%r2 ; add r1 and right part to form address
-
- This function returns sign extended values in all cases.
-*/
-
-static inline unsigned int
-hppa_field_adjust (value, addend, r_field)
- unsigned int value;
- int addend;
- enum hppa_fsel r_field;
-{
- unsigned int sym_val;
-
- sym_val = value - addend;
- switch (r_field)
- {
- case e_fsel:
- /* F: No change. */
- break;
-
- case e_lsel:
- /* L: Select top 21 bits. */
- value = value >> 11;
- break;
-
- case e_rsel:
- /* R: Select bottom 11 bits. */
- value = value & 0x7ff;
- break;
-
- case e_lrsel:
- /* LR: L with rounding of the addend to nearest 8k. */
- value = sym_val + ((addend + 0x1000) & -0x2000);
- value = value >> 11;
- break;
-
- case e_rrsel:
- /* RR: R with rounding of the addend to nearest 8k.
- We need to return a value such that 2048 * LR'x + RR'x == x
- ie. RR'x = s+a - (s + (((a + 0x1000) & -0x2000) & -0x800))
- . = s+a - ((s & -0x800) + ((a + 0x1000) & -0x2000))
- . = (s & 0x7ff) + a - ((a + 0x1000) & -0x2000) */
- value = (sym_val & 0x7ff) + (((addend & 0x1fff) ^ 0x1000) - 0x1000);
- break;
-
- default:
- abort();
- }
- return value;
-}
-
-/* Insert VALUE into INSN using R_FORMAT to determine exactly what
- bits to change. */
-
-static inline int
-hppa_rebuild_insn (insn, value, r_format)
- int insn;
- int value;
- int r_format;
-{
- switch (r_format)
- {
- case 11:
- return (insn & ~ 0x7ff) | low_sign_unext (value, 11);
-
- case 12:
- return (insn & ~ 0x1ffd) | re_assemble_12 (value);
-
-
- case 10:
- return (insn & ~ 0x3ff1) | re_assemble_14 (value & -8);
-
- case -11:
- return (insn & ~ 0x3ff9) | re_assemble_14 (value & -4);
-
- case 14:
- return (insn & ~ 0x3fff) | re_assemble_14 (value);
-
-
- case -10:
- return (insn & ~ 0xfff1) | re_assemble_16 (value & -8);
-
- case -16:
- return (insn & ~ 0xfff9) | re_assemble_16 (value & -4);
-
- case 16:
- return (insn & ~ 0xffff) | re_assemble_16 (value);
-
-
- case 17:
- return (insn & ~ 0x1f1ffd) | re_assemble_17 (value);
-
- case 21:
- return (insn & ~ 0x1fffff) | re_assemble_21 (value);
-
- case 22:
- return (insn & ~ 0x3ff1ffd) | re_assemble_22 (value);
-
- case 32:
- return value;
-
- default:
- abort ();
- }
- return insn;
-}
-
-/* ====================================================================
-
- End of functions from GNU BFD.
-
- ==================================================================== */
-
-/* This is where we get the opportunity to create any extra dynamic
- sections we might need. In our case we do not need a GOT because
- our code is not PIC, but we do need to create a stub section.
-
- This is significantly less complex than what we do for shared
- libraries because, obviously, modules are not shared. Also we have
- no issues related to symbol visibility, lazy linking, etc.
- The kernels dp is fixed (at symbol data_start), and we can fix up any
- DPREL refs in the module to use that same dp value.
- All PCREL17F refs result in a stub with the following format:
-
- ldil L'func_addr,%r1
- be,n R'func_addr(%sr4,%r1)
-
- Note, all PCREL17F get a stub, regardless of whether they are
- local or external. With local ones, and external ones to other
- modules, there is a good chance we could manage without the stub.
- I'll leave that for a future optimisation.
- */
-
-#define LDIL_R1 0x20200000 /* ldil L'XXX,%r1 */
-#define BE_N_SR4_R1 0xe0202002 /* be,n R'XXX(%sr4,%r1) */
-
-#define STUB_SIZE 8
-
-int
-arch_create_got(struct obj_file *f)
-{
- hppa_file_t *hfile = (hppa_file_t *)f;
- int i, n;
- int stub_offset = 0;
-
- /* Create stub section.
- * XXX set flags, see obj_ia64.c
- */
- hfile->stub = obj_create_alloced_section(f, ".stub", STUB_SIZE, 0);
-
- /* Actually this is a lot like check_relocs() in a BFD backend. We
- walk all sections and all their relocations and look for ones
- that need special treatment. */
- n = hfile->root.header.e_shnum;
- for (i = 0; i < n; ++i)
- {
- struct obj_section *relsec, *symsec, *strsec;
- Elf32_Rela *rel, *relend;
- Elf32_Sym *symtab;
- char const *strtab;
-
- relsec = hfile->root.sections[i];
- if (relsec->header.sh_type != SHT_RELA)
- continue;
-
- symsec = hfile->root.sections[relsec->header.sh_link];
- strsec = hfile->root.sections[symsec->header.sh_link];
-
- rel = (Elf32_Rela *)relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rela));
- symtab = (Elf32_Sym *)symsec->contents;
- strtab = (char const *)strsec->contents;
-
- for (; rel < relend; rel++)
- {
- int need_stub = 0;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- default:
- continue;
-
- case R_PARISC_PCREL17F:
- need_stub = 1;
- break;
- }
-
- if (need_stub)
- {
- Elf32_Sym *extsym;
- hppa_symbol_t *hsym;
- char const *name;
- int local;
- unsigned long symndx;
-
- symndx = ELF32_R_SYM(rel->r_info);
- extsym = symtab + symndx;
- if (ELF32_ST_BIND(extsym->st_info) == STB_LOCAL)
- hsym = (hppa_symbol_t *) f->local_symtab[symndx];
- else
- {
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- hsym = (hppa_symbol_t *)obj_find_symbol(f, name);
- }
- local = hsym->root.secidx <= SHN_HIRESERVE;
-
- if (need_stub)
- {
- hppa_stub_t *stub;
-
- if (hsym->stub == NULL)
- {
- stub = (hppa_stub_t *) xmalloc(sizeof(hppa_stub_t));
- stub->offset = stub_offset;
- stub->reloc_done = 0;
- hsym->stub = stub;
- stub_offset += STUB_SIZE;
- need_stub = 0;
- }
- }
- }
- }
- }
- if (stub_offset)
- {
- hfile->stub->contents = xmalloc(stub_offset);
- hfile->stub->header.sh_size = stub_offset;
- }
- return 1;
-}
-
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf32_Rela *rel,
- Elf32_Addr v)
-{
- hppa_file_t *hfile = (hppa_file_t *) f;
- hppa_symbol_t *hsym = (hppa_symbol_t *) sym;
-
- Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
- Elf32_Addr dot = (targsec->header.sh_addr + rel->r_offset) & ~0x03;
- Elf32_Addr dp = hfile->dp;
- Elf32_Word r_info = ELF32_R_TYPE(rel->r_info);
-
- enum obj_reloc ret = obj_reloc_ok;
- enum hppa_fsel fsel = e_fsel; /* Avoid compiler warning */
- unsigned int r_format;
-
- /* Fix up the value, and determine whether we can handle this
- relocation. */
- switch (r_info)
- {
- case R_PARISC_PLABEL32:
- case R_PARISC_DIR32:
- case R_PARISC_DIR21L:
- case R_PARISC_DIR14R:
- /* Easy. */
- break;
-
- case R_PARISC_DPREL21L:
- case R_PARISC_DPREL14R:
- v -= dp;
- break;
-
- case R_PARISC_PCREL17F:
- /* Find an import stub. */
- assert(hsym->stub != NULL);
- assert(hfile->stub != NULL);
- /* XXX Optimise. We may not need a stub for short branches */
- if (!hsym->stub->reloc_done) {
- /* Need to create the .stub entry */
- Elf32_Addr *pstub, stubv;
-
- pstub = (Elf32_Addr *)(hfile->stub->contents + hsym->stub->offset);
- pstub[0] = LDIL_R1;
- pstub[1] = BE_N_SR4_R1;
- stubv = hppa_field_adjust(v, rel->r_addend, e_lrsel);
- pstub[0] = hppa_rebuild_insn(pstub[0], stubv, 21);
- stubv = hppa_field_adjust(v, rel->r_addend, e_rrsel);
- stubv >>= 2; /* Branch; divide by 4 */
- pstub[1] = hppa_rebuild_insn(pstub[1], stubv, 17);
- hsym->stub->reloc_done = 1;
- }
- v = hsym->stub->offset + hfile->stub->header.sh_addr;
- break;
-
- default:
- return obj_reloc_unhandled;
- }
-
- /* Find the field selector. */
- switch (r_info)
- {
- case R_PARISC_DIR32:
- case R_PARISC_PLABEL32:
- case R_PARISC_PCREL17F:
- fsel = e_fsel;
- break;
-
- case R_PARISC_DPREL21L:
- case R_PARISC_DIR21L:
- fsel = e_lrsel;
- break;
-
- case R_PARISC_DPREL14R:
- case R_PARISC_DIR14R:
- fsel = e_rrsel;
- break;
- }
-
- v = hppa_field_adjust(v, rel->r_addend, fsel);
-
- switch (r_info)
- {
- case R_PARISC_PCREL17F:
- case R_PARISC_PCREL17R:
- case R_PARISC_PCREL22F:
- v = v - dot - 8;
- case R_PARISC_DIR17F:
- case R_PARISC_DIR17R:
- /* This is a branch. Divide the offset by four. */
- v >>= 2;
- break;
- default:
- break;
- }
-
- /* Find the format. */
- switch (r_info)
- {
- case R_PARISC_DIR32:
- case R_PARISC_PLABEL32:
- r_format = 32;
- break;
-
- case R_PARISC_DPREL21L:
- case R_PARISC_DIR21L:
- r_format = 21;
- break;
-
- case R_PARISC_PCREL17F:
- r_format = 17;
- break;
-
- case R_PARISC_DPREL14R:
- case R_PARISC_DIR14R:
- r_format = 14;
- break;
-
- default:
- abort();
- }
-
- *loc = hppa_rebuild_insn(*loc, v, r_format);
-
- return ret;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *sec)
-{
- struct module_symbol *s;
- int i;
- hppa_file_t *hfile = (hppa_file_t *)f;
-
- /* Initialise dp to the kernels dp (symbol data_start)
- */
- for (i = 0, s = ksyms; i < nksyms; i++, s++)
- if (!strcmp((char *)s->name, "data_start"))
- break;
- if (i >= nksyms) {
- error("Cannot initialise dp, 'data_start' not found\n");
- return 1;
- }
- hfile->dp = s->value;
-
- return 0;
-}
-
diff --git a/mdk-stage1/insmod-modutils/obj/obj_hppa64.c b/mdk-stage1/insmod-modutils/obj/obj_hppa64.c
deleted file mode 100644
index fe32911ff..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_hppa64.c
+++ /dev/null
@@ -1,686 +0,0 @@
-/*
- * hppa parisc64 specific support for Elf loading and relocation.
- * Copyright 2000 Richard Hirst <rhirst@linuxcare.com>, Linuxcare Inc.
- *
- * Based on ia64 specific support which was
- * Copyright 2000 Mike Stephens <mike.stephens@intel.com>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-#include <stdlib.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-#ifndef TRUE
-#define TRUE ~FALSE
-#endif
-
-/*======================================================================*/
-
-typedef struct _hppa64_opd_t
-{
- int offset;
- int reloc_done;
-} hppa64_opd_t;
-
-typedef struct _hppa64_stub_t
-{
- struct _hppa64_stub_t *next;
- Elf64_Addr addend;
- int offset;
- int reloc_done;
-} hppa64_stub_t;
-
-typedef struct _hppa64_got_t
-{
- struct _hppa64_got_t *next;
- Elf64_Addr addend;
- int offset;
- int reloc_done;
-} hppa64_got_t;
-
-typedef struct _hppa64_symbol_t
-{
- struct obj_symbol root;
- hppa64_got_t *gotent;
- hppa64_opd_t *opdent;
- hppa64_stub_t *stubent;
-} hppa64_symbol_t;
-
-typedef struct _hppa64_file_t
-{
- struct obj_file root;
- struct obj_section *got;
- struct obj_section *opd;
- struct obj_section *stub;
- Elf64_Addr gp;
- Elf64_Addr text;
- Elf64_Addr data;
- Elf64_Addr bss;
-} hppa64_file_t;
-
-/*
- * XXX This stub assumes it can reach the .got entry with a +/- 8K offset
- * from dp. Perhaps we should use a .plt for these entries to give a
- * greater chance of that being true.
- *
- * 53 7b 00 00 ldd 0(dp),dp
- * R_PARISC_LTOFF14R <.got entry offset from dp>
- * 53 61 00 20 ldd 10(dp),r1
- * e8 20 d0 00 bve (r1)
- * 53 7b 00 30 ldd 18(dp),dp
- *
- * We need a different stub for millicode calls, which doesn't screw
- * dp:
- *
- * 53 61 00 00 ldd 0(dp),r1
- * R_PARISC_LTOFF14R <.got entry offset from dp>
- * 50 21 00 20 ldd 10(r1),r1
- * e8 20 d0 00 bve (r1)
- * 08 00 02 40 nop
- *
- */
-
-/* NOTE: to keep the code cleaner we make all stubs the same size.
- */
-
-#define SIZEOF_STUB 16
-
-unsigned char hppa64_stub_extern[] =
-{
- 0x53, 0x7b, 0x00, 0x00,
- 0x53, 0x61, 0x00, 0x20,
- 0xe8, 0x20, 0xd0, 0x00,
- 0x53, 0x7b, 0x00, 0x30,
-};
-
-unsigned char hppa64_stub_millicode[] =
-{
- 0x53, 0x61, 0x00, 0x00,
- 0x50, 0x21, 0x00, 0x20,
- 0xe8, 0x20, 0xd0, 0x00,
- 0x08, 0x00, 0x02, 0x40,
-};
-
-/*======================================================================*/
-
-enum obj_reloc
-patch_14r(Elf64_Xword v64, Elf64_Word *p)
-{
- Elf64_Word i = *p;
- Elf64_Word v = (Elf64_Word)v64;
-
- if (v & 0x80000000)
- v |= ~0x7ff;
- else
- v &= 0x7ff;
- i &= ~ 0x3fff;
- i |= (v & 0x1fff) << 1 |
- (v & 0x2000) >> 13;
- *p = i;
-
- return obj_reloc_ok;
-}
-
-enum obj_reloc
-patch_21l(Elf64_Xword v64, Elf64_Word *p)
-{
- Elf64_Word i = *p;
- Elf64_Word v = (Elf64_Word)v64;
-
- v &= 0xfffff800;
- if (v & 0x80000000)
- v += 0x800;
- i &= ~ 0x1fffff;
- i |= (v & 0x80000000) >> 31 |
- (v & 0x7ff00000) >> 19 |
- (v & 0x000c0000) >> 4 |
- (v & 0x0003e000) << 3 |
- (v & 0x00001800) << 1;
- *p = i;
-
- return obj_reloc_ok;
-}
-
-
-/* All 14 bits this time... This is used to patch the .got offset in
- * a stub for PCREL22F.
- */
-
-enum obj_reloc
-patch_14r2(Elf64_Xword v64, Elf64_Word *p)
-{
- Elf64_Word i = *p;
- Elf64_Word v = (Elf64_Word)v64;
-
- if ((Elf64_Sxword)v64 > 0x1fffL ||
- (Elf64_Sxword)v64 < -0x2000L)
- return obj_reloc_overflow;
- i &= ~ 0x3fff;
- i |= (v & 0x2000) >> 13 |
- (v & 0x1fff) << 1;
- *p = i;
-
- return obj_reloc_ok;
-}
-
-
-enum obj_reloc
-patch_22f(Elf64_Xword v64, Elf64_Word *p)
-{
- Elf64_Word i = *p;
- Elf64_Word v = (Elf64_Word)v64;
-
- if ((Elf64_Sxword)v64 > 0x800000-1 ||
- (Elf64_Sxword)v64 < -0x800000)
- return obj_reloc_overflow;
-
- i &= ~ 0x03ff1ffd;
- i |= (v & 0x00800000) >> 23 |
- (v & 0x007c0000) << 3 |
- (v & 0x0003e000) << 3 |
- (v & 0x00001000) >> 10 |
- (v & 0x00000ffc) << 1;
- *p = i;
-
- return obj_reloc_ok;
-}
-
-
-struct obj_section *
-obj_hppa64_create_alloced_section (struct obj_file *f, const char *name,
- unsigned long align, unsigned long size, unsigned long sh_flags)
-{
- int newidx = f->header.e_shnum++;
- struct obj_section *sec;
-
- f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
- f->sections[newidx] = sec = arch_new_section();
-
- memset(sec, 0, sizeof(*sec));
- sec->header.sh_type = SHT_PROGBITS;
- sec->header.sh_flags = sh_flags;
- sec->header.sh_size = size;
- sec->header.sh_addralign = align;
- sec->name = name;
- sec->idx = newidx;
- if (size)
- sec->contents = xmalloc(size);
-
- obj_insert_section_load_order(f, sec);
-
- return sec;
-}
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- hppa64_file_t *f;
- f = xmalloc(sizeof(*f));
- f->got = NULL;
- f->opd = NULL;
- f->stub = NULL;
- return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- hppa64_symbol_t *sym;
- sym = xmalloc(sizeof(*sym));
- sym->gotent = NULL;
- sym->opdent = NULL;
- sym->stubent = NULL;
- return &sym->root;
-}
-
-/* This may not be needed, but does no harm (copied from ia64).
- */
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- switch (sec->header.sh_type)
- {
- case SHT_PARISC_EXT :
- sec->contents = NULL;
- break;
-
- case SHT_PARISC_UNWIND :
- if (sec->header.sh_size > 0)
- {
- sec->contents = xmalloc(sec->header.sh_size);
- gzf_lseek(fp, sec->header.sh_offset, SEEK_SET);
- if (gzf_read(fp, sec->contents, sec->header.sh_size) != sec->header.sh_size)
- {
- error("error reading ELF section data: %m");
- return -1;
- }
- }
- else
- sec->contents = NULL;
- break;
- default:
- error("Unknown section header type: %08x", sec->header.sh_type);
- return -1;
- }
- return 0;
-}
-
-int
-arch_create_got(struct obj_file *f)
-{
- hppa64_file_t *hfile = (hppa64_file_t *)f;
- int i;
- int n;
- int got_offset = 0;
- int opd_offset = 64;
- int stub_offset = 0;
-
- n = hfile->root.header.e_shnum;
- for (i = 0; i < n; ++i)
- {
- struct obj_section *relsec, *symsec, *strsec;
- Elf64_Rela *rel, *relend;
- Elf64_Sym *symtab;
- const char *strtab;
-
- relsec = hfile->root.sections[i];
- if (relsec->header.sh_type != SHT_RELA)
- continue;
-
- symsec = hfile->root.sections[relsec->header.sh_link];
- strsec = hfile->root.sections[symsec->header.sh_link];
-
- rel = (Elf64_Rela *)relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(Elf64_Rela));
- symtab = (Elf64_Sym *)symsec->contents;
- strtab = (const char *)strsec->contents;
-
- for (; rel < relend; ++rel)
- {
- int need_got = FALSE;
- int need_opd = FALSE;
- int need_stub = FALSE;
-
- switch (ELF64_R_TYPE(rel->r_info))
- {
- default:
- {
- unsigned r_info = ELF64_R_TYPE(rel->r_info);
- printf("r_info 0x%x not handled\n", r_info);
- }
- continue;
- case R_PARISC_LTOFF14R:
- case R_PARISC_LTOFF21L:
- /* These are simple indirect references to symbols through the
- * DLT. We need to create a DLT entry for any symbols which
- * appears in a DLTIND relocation.
- */
- need_got = TRUE;
- break;
- case R_PARISC_PCREL22F:
- /* These are function calls. Depending on their precise
- * target we may need to make a stub for them. The stub
- * uses the dlt, so we need to create dlt entries for
- * these symbols too.
- */
- need_got = TRUE;
- need_stub = TRUE;
- break;
- case R_PARISC_DIR64:
- break;
- case R_PARISC_FPTR64:
- /* This is a simple OPD entry (only created for local symbols,
- * see below).
- */
- need_opd = TRUE;
- break;
- }
-
- if (need_got || need_opd || need_stub)
- {
- Elf64_Sym *extsym;
- hppa64_symbol_t *isym;
- const char *name;
- int local;
- unsigned long symndx;
-
- symndx = ELF64_R_SYM(rel->r_info);
- extsym = &symtab[symndx];
- if (ELF64_ST_BIND(extsym->st_info) == STB_LOCAL)
- {
- isym = (hppa64_symbol_t *) f->local_symtab[symndx];
- }
- else
- {
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- isym = (hppa64_symbol_t *)obj_find_symbol(f, name);
- }
- local = isym->root.secidx <= SHN_HIRESERVE;
-
- if (need_stub)
- {
- hppa64_stub_t *stub;
-
- for (stub = isym->stubent; stub != NULL; stub = stub->next)
- if (stub->addend == rel->r_addend)
- break;
- if (stub == NULL)
- {
- stub = (hppa64_stub_t *) xmalloc(sizeof(hppa64_stub_t));
- stub->next = isym->stubent;
- stub->addend = rel->r_addend;
- stub->offset = stub_offset;
- stub->reloc_done = FALSE;
- isym->stubent = stub;
- {
- stub_offset += SIZEOF_STUB;
- }
- need_stub = FALSE;
- }
- }
- if (need_got)
- {
- hppa64_got_t *got;
-
- for (got = isym->gotent; got != NULL; got = got->next)
- if (got->addend == rel->r_addend)
- break;
- if (got == NULL)
- {
- got = (hppa64_got_t *) xmalloc(sizeof(hppa64_got_t));
- got->next = isym->gotent;
- got->addend = rel->r_addend;
- got->offset = got_offset;
- got->reloc_done = FALSE;
- isym->gotent = got;
- got_offset += 8;
- need_got = FALSE;
- }
- }
- if (need_opd && local)
- {
- hppa64_opd_t *opd;
-
- if (isym->opdent == NULL)
- {
- opd = (hppa64_opd_t *) xmalloc(sizeof(hppa64_opd_t));
- opd->offset = opd_offset;
- opd->reloc_done = FALSE;
- isym->opdent = opd;
- opd_offset += 32;
- need_opd = FALSE;
- }
- }
- }
- }
- }
-
- hfile->got = obj_hppa64_create_alloced_section(f, ".got", 8, got_offset,
- (SHF_ALLOC | SHF_WRITE | SHF_PARISC_SHORT));
- assert(hfile->got != NULL);
-
- hfile->opd = obj_hppa64_create_alloced_section(f, ".opd", 16, opd_offset,
- (SHF_ALLOC | SHF_WRITE | SHF_PARISC_SHORT));
- assert(hfile->opd != NULL);
-
- if (stub_offset > 0)
- {
- hfile->stub = obj_hppa64_create_alloced_section(f, ".stub", 16,
- stub_offset, (SHF_ALLOC | SHF_EXECINSTR | SHF_PARISC_SHORT));
- assert(hfile->stub != NULL);
- }
-
- return 1;
-}
-
-
-/* This is a small simple version which seems to work fine. ia64 has
- * a much more complex algorithm. We point dp at the end of the .got,
- * which is the start of the .opd.
- */
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
- hppa64_file_t *hfile = (hppa64_file_t *)f;
- int n = f->header.e_shnum;
- int i;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
-
- /* Pick a sensible value for gp */
- hfile->gp = hfile->got->header.sh_addr + hfile->got->header.sh_size;
-
- return 1;
-}
-
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf64_Rela *rel,
- Elf64_Addr v)
-{
- hppa64_file_t *hfile = (hppa64_file_t *) f;
- hppa64_symbol_t *isym = (hppa64_symbol_t *) sym;
-
- Elf64_Word *loc = (Elf64_Word *)(targsec->contents + rel->r_offset);
- Elf64_Addr dot = (targsec->header.sh_addr + rel->r_offset) & ~0x03;
-
- Elf64_Addr got = hfile->got->header.sh_addr;
- Elf64_Addr gp = hfile->gp;
-
- Elf64_Xword r_info = ELF64_R_TYPE(rel->r_info);
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (r_info)
- {
- default:
- ret = obj_reloc_unhandled;
- break;
- case R_PARISC_LTOFF14R:
- case R_PARISC_LTOFF21L:
- {
- hppa64_got_t *ge;
-
- assert(isym != NULL);
- for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
- ge = ge->next;
- assert(ge != NULL);
- if (!ge->reloc_done)
- {
- ge->reloc_done = TRUE;
- *(Elf64_Addr *)(hfile->got->contents + ge->offset) = v;
- }
- v = got + ge->offset - gp;
- if (r_info == R_PARISC_LTOFF14R)
- ret = patch_14r(v, loc);
- else
- ret = patch_21l(v, loc);
- }
- break;
- case R_PARISC_PCREL22F:
- {
- hppa64_got_t *ge;
-
- assert(isym != NULL);
- for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
- ge = ge->next;
- assert(ge != NULL);
- if (!ge->reloc_done)
- {
- ge->reloc_done = TRUE;
- *(Elf64_Addr *)(hfile->got->contents + ge->offset) = v;
- }
- if ((isym->root.secidx > SHN_HIRESERVE) ||
- ((Elf64_Sxword) (v - dot - 8) > 0x800000-1) ||
- ((Elf64_Sxword) (v - dot - 8) < -0x800000))
- {
- hppa64_stub_t *se;
-
- for (se = isym->stubent; se != NULL && se->addend != rel->r_addend; )
- se = se->next;
- assert(se != NULL);
- if (!se->reloc_done)
- {
- /* This requires that we can get from dp to the entry in +/- 8K,
- * or +/- 1000 entries. patch_14r2() will check that.
- * Only need these dlt entries for calls to external/far
- * functions, so should probably put them in a seperate section
- * before dlt and point dp at the section. Change to that
- * scheme if we hit problems with big modules.
- */
- unsigned char *stub;
-
- if (!strncmp(isym->root.name, "$$", 2))
- stub = hppa64_stub_millicode;
- else
- stub = hppa64_stub_extern;
- se->reloc_done = TRUE;
- memcpy((Elf64_Addr *)(hfile->stub->contents + se->offset),
- stub, SIZEOF_STUB);
- v = (Elf64_Addr)(hfile->got->header.sh_addr + ge->offset) - gp;
- ret = patch_14r2(v, (Elf64_Word *)(hfile->stub->contents + se->offset));
- }
- v = hfile->stub->header.sh_addr + se->offset;
- }
- v = v - dot - 8;
- if (ret == obj_reloc_ok)
- ret = patch_22f(v, loc);
- }
- break;
- case R_PARISC_DIR64:
- {
- loc[0] = v >> 32;
- loc[1] = v;
- }
- break;
- case R_PARISC_FPTR64:
- {
- assert(isym != NULL);
- if (isym->root.secidx <= SHN_HIRESERVE) /* local */
- {
- assert(isym->opdent != NULL);
- if (!isym->opdent->reloc_done)
- {
- isym->opdent->reloc_done = TRUE;
- *(Elf64_Addr *)(hfile->opd->contents + isym->opdent->offset + 16) = v;
- *(Elf64_Addr *)(hfile->opd->contents + isym->opdent->offset + 24) = gp;
- }
- v = hfile->opd->header.sh_addr + isym->opdent->offset;
- }
- loc[0] = v >> 32;
- loc[1] = v;
- }
- break;
- }
- return ret;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- hppa64_file_t *hfile = (hppa64_file_t *)f;
- Elf64_Addr *opd = (Elf64_Addr *)(hfile->opd->contents);
-
- opd[0] = 0;
- opd[1] = 0;
- if ((opd[2] = mod->init) != 0)
- {
- opd[3] = hfile->gp;
- mod->init = hfile->opd->header.sh_addr;
- }
-
- opd[4] = 0;
- opd[5] = 0;
- if ((opd[6] = mod->cleanup) != 0)
- {
- opd[7] = hfile->gp;
- mod->cleanup = hfile->opd->header.sh_addr + 32;
- }
-
- return 1;
-}
-
-/* XXX Is this relevant to parisc? */
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *archdata_sec)
-{
- hppa64_file_t *hfile = (hppa64_file_t *)f;
- struct archdata {
- unsigned tgt_long unw_table;
- unsigned tgt_long segment_base;
- unsigned tgt_long unw_start;
- unsigned tgt_long unw_end;
- unsigned tgt_long gp;
- } *ad;
- int i;
- struct obj_section *sec;
-
- free(archdata_sec->contents);
- archdata_sec->contents = xmalloc(sizeof(struct archdata));
- memset(archdata_sec->contents, 0, sizeof(struct archdata));
- archdata_sec->header.sh_size = sizeof(struct archdata);
-
- ad = (struct archdata *)(archdata_sec->contents);
- ad->gp = hfile->gp;
- ad->unw_start = 0;
- ad->unw_end = 0;
- ad->unw_table = 0;
- ad->segment_base = f->sections[1]->header.sh_addr;
- for (i = 0; i < f->header.e_shnum; ++i)
- {
- sec = f->sections[i];
- if (sec->header.sh_type == SHT_PARISC_UNWIND)
- {
- ad->unw_start = sec->header.sh_addr;
- ad->unw_end = sec->header.sh_addr + sec->header.sh_size;
- break;
- }
- }
-
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_i386.c b/mdk-stage1/insmod-modutils/obj/obj_i386.c
deleted file mode 100644
index 28df3448c..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_i386.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/* i386 specific support for Elf loading and relocation.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct i386_got_entry
-{
- int offset;
- unsigned offset_done : 1;
- unsigned reloc_done : 1;
-};
-
-struct i386_file
-{
- struct obj_file root;
- struct obj_section *got;
-};
-
-struct i386_symbol
-{
- struct obj_symbol root;
- struct i386_got_entry gotent;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- struct i386_file *f;
- f = xmalloc(sizeof(*f));
- f->got = NULL;
- return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- struct i386_symbol *sym;
- sym = xmalloc(sizeof(*sym));
- memset(&sym->gotent, 0, sizeof(sym->gotent));
- return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- /* Assume it's just a debugging section that we can safely
- ignore ... */
- sec->contents = NULL;
-
- return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf32_Rel *rel,
- Elf32_Addr v)
-{
- struct i386_file *ifile = (struct i386_file *)f;
- struct i386_symbol *isym = (struct i386_symbol *)sym;
-
- Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
- Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
- Elf32_Addr got = ifile->got ? ifile->got->header.sh_addr : 0;
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- case R_386_NONE:
- break;
-
- case R_386_32:
- *loc += v;
- break;
-
- case R_386_PLT32:
- case R_386_PC32:
- *loc += v - dot;
- break;
-
- case R_386_GLOB_DAT:
- case R_386_JMP_SLOT:
- *loc = v;
- break;
-
- case R_386_RELATIVE:
- *loc += f->baseaddr;
- break;
-
- case R_386_GOTPC:
- assert(got != 0);
- *loc += got - dot;
- break;
-
- case R_386_GOT32:
- assert(isym != NULL);
- if (!isym->gotent.reloc_done)
- {
- isym->gotent.reloc_done = 1;
- *(Elf32_Addr *)(ifile->got->contents + isym->gotent.offset) = v;
- }
- *loc += isym->gotent.offset;
- break;
-
- case R_386_GOTOFF:
- assert(got != 0);
- *loc += v - got;
- break;
-
- default:
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
- struct i386_file *ifile = (struct i386_file *)f;
- int i, n, offset = 0, gotneeded = 0;
-
- n = ifile->root.header.e_shnum;
- for (i = 0; i < n; ++i)
- {
- struct obj_section *relsec, *symsec, *strsec;
- Elf32_Rel *rel, *relend;
- Elf32_Sym *symtab;
- const char *strtab;
-
- relsec = ifile->root.sections[i];
- if (relsec->header.sh_type != SHT_REL)
- continue;
-
- symsec = ifile->root.sections[relsec->header.sh_link];
- strsec = ifile->root.sections[symsec->header.sh_link];
-
- rel = (Elf32_Rel *)relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rel));
- symtab = (Elf32_Sym *)symsec->contents;
- strtab = (const char *)strsec->contents;
-
- for (; rel < relend; ++rel)
- {
- Elf32_Sym *extsym;
- struct i386_symbol *intsym;
- const char *name;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- case R_386_GOTPC:
- case R_386_GOTOFF:
- gotneeded = 1;
- default:
- continue;
-
- case R_386_GOT32:
- break;
- }
-
- extsym = &symtab[ELF32_R_SYM(rel->r_info)];
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym = (struct i386_symbol *)obj_find_symbol(&ifile->root, name);
-
- if (!intsym->gotent.offset_done)
- {
- intsym->gotent.offset_done = 1;
- intsym->gotent.offset = offset;
- offset += 4;
- }
- }
- }
-
- if (offset > 0 || gotneeded)
- ifile->got = obj_create_alloced_section(&ifile->root, ".got", 4, offset);
-
- return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_ia64.c b/mdk-stage1/insmod-modutils/obj/obj_ia64.c
deleted file mode 100644
index 4f92c5d27..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_ia64.c
+++ /dev/null
@@ -1,1065 +0,0 @@
-/*
- * ia64 specific support for Elf loading and relocation.
- * Copyright 2000 Mike Stephens <mike.stephens@intel.com>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-#include <stdlib.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-#ifndef TRUE
-#define TRUE ~FALSE
-#endif
-
-/*======================================================================*/
-
-typedef struct _ia64_opd_t
-{
- int offset;
- int reloc_done;
-} ia64_opd_t;
-
-typedef struct _ia64_plt_t
-{
- struct _ia64_plt_t *next;
- Elf64_Addr addend;
- int text_offset;
- int data_offset;
- int reloc_done;
-} ia64_plt_t;
-
-typedef struct _ia64_got_t
-{
- struct _ia64_got_t *next;
- Elf64_Addr addend;
- int offset;
- int reloc_done;
-} ia64_got_t;
-
-typedef struct _ia64_symbol_t
-{
- struct obj_symbol root;
- ia64_got_t *gotent;
- ia64_opd_t *opdent;
- ia64_plt_t *pltent;
-} ia64_symbol_t;
-
-typedef struct _ia64_file_t
-{
- struct obj_file root;
- struct obj_section *got;
- struct obj_section *opd;
- struct obj_section *pltt;
- struct obj_section *pltd;
- Elf64_Addr gp;
- Elf64_Addr text;
- Elf64_Addr data;
- Elf64_Addr bss;
-} ia64_file_t;
-
-/*
- * aa=gp rel address of the function descriptor in the .IA_64.pltoff section
- */
-unsigned char ia64_plt_local[] =
-{
- 0x0b, 0x78, 0x00, 0x02, 0x00, 0x24, /* [MMI] addl r15=aa,gp;; */
- 0x00, 0x41, 0x3c, 0x30, 0x28, 0xc0, /* ld8 r16=[r15],8 */
- 0x01, 0x08, 0x00, 0x84, /* mov r14=gp;; */
- 0x11, 0x08, 0x00, 0x1e, 0x18, 0x10, /* [MIB] ld8 gp=[r15] */
- 0x60, 0x80, 0x04, 0x80, 0x03, 0x00, /* mov b6=r16 */
- 0x60, 0x00, 0x80, 0x00 /* br.few b6;; */
-};
-
-unsigned char ia64_plt_extern[] =
-{
- 0x0b, 0x80, 0x00, 0x02, 0x00, 0x24, /* [MMI] addl r16=aa,gp;; */
- 0xf0, 0x00, 0x40, 0x30, 0x20, 0x00, /* ld8 r15=[r16] */
- 0x00, 0x00, 0x04, 0x00, /* nop.i 0x0;; */
- 0x0b, 0x80, 0x20, 0x1e, 0x18, 0x14, /* [MMI] ld8 r16=[r15],8;; */
- 0x10, 0x00, 0x3c, 0x30, 0x20, 0xc0, /* ld8 gp=[r15] */
- 0x00, 0x09, 0x00, 0x07, /* mov b6=r16;; */
- 0x11, 0x00, 0x00, 0x00, 0x01, 0x00, /* [MIB] nop.m 0x0 */
- 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, /* nop.i 0x0 */
- 0x60, 0x00, 0x80, 0x00 /* br.few b6;; */
-};
-
-/*======================================================================*/
-
-/*
- * return the instruction at slot in bundle
- */
-Elf64_Xword
-obj_ia64_ins_extract_from_bundle(Elf64_Addr *bundle, Elf64_Xword slot)
-{
- switch (slot)
- {
- case 0 :
- return (*bundle >> 5) & 0x1ffffffffff;
-
- case 1 :
- return (((*bundle >> 46) & 0x3ffff) |
- (*(bundle + 1) << 18)) & 0x1ffffffffff;
-
- case 2 :
- return (*(bundle + 1) >> 23) & 0x1ffffffffff;
-
- default:
- }
- return (-1);
-}
-
-/*
- * insert a instruction at slot in bundle
- */
-void
-obj_ia64_ins_insert_in_bundle(Elf64_Addr *bundle, Elf64_Xword slot, Elf64_Xword ins)
-{
- Elf64_Xword i;
- Elf64_Xword in = ins & 0x1ffffffffff;
-
- switch (slot)
- {
- case 0 :
- i = *bundle & 0xffffc0000000001f;
- *bundle = i | (in << 5);
- break;
-
- case 1 :
- i = *bundle & 0x00003fffffffffff;
- *bundle = i | (in << 46);
-
- ++bundle;
- i = *bundle & 0xffffffffff800000;
- *bundle = i | (in >> 18);
- break;
-
- case 2 :
- ++bundle;
- i = *bundle & 0x00000000007fffff;
- *bundle = i | (in << 23);
- break;
- }
-}
-
-/*
- * add a immediate 14 value to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_imm14(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
- Elf64_Xword ins;
-
- ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
- ins &= 0xffffffee07f01fff;
- ins |= ((v & 0x2000) << 23) | ((v & 0x1f80) << 20) | ((v & 0x007f) << 13);
- obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
- if (((Elf64_Sxword) v > 8191) || ((Elf64_Sxword) v < -8192))
- return obj_reloc_overflow;
- return obj_reloc_ok;
-}
-
-/*
- * add a immediate 22 value to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_imm22(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
- Elf64_Xword ins;
-
- ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
- ins &= 0xffffffe000301fff;
- ins |= ((v & 0x200000) << 15) | ((v & 0x1f0000) << 6) |
- ((v & 0x00ff80) << 20) | ((v & 0x00007f) << 13);
- obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
- if (((Elf64_Sxword) v > 2097151) || ((Elf64_Sxword) v < -2097152))
- return obj_reloc_overflow;
- return obj_reloc_ok;
-}
-
-/*
- * add a immediate 21 value (form 1) to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_pcrel21b(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
- Elf64_Xword ins;
-
- ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
- ins &= 0xffffffee00001fff;
- ins |= ((v & 0x1000000) << 12) | ((v & 0x0fffff0) << 9);
- obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
- return obj_reloc_ok;
-}
-
-/*
- * add a immediate 21 value (form 2) to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_pcrel21m(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
- Elf64_Xword ins;
-
- ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
- ins &= 0xffffffee000fe03f;
- ins |= ((v & 0x1000000) << 12) | ((v & 0x0fff800) << 9) |
- ((v & 0x00007f0) << 2);
- obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
- return obj_reloc_ok;
-}
-
-/*
- * add a immediate 21 value (form 3) to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_pcrel21f(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
- Elf64_Xword ins;
-
- ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
- ins &= 0xffffffeffc00003f;
- ins |= ((v & 0x1000000) << 12) | ((v & 0x0fffff0) << 2);
- obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
- return obj_reloc_ok;
-}
-
-/*
- * add a immediate 64 value to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_imm64(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
- Elf64_Xword ins;
-
- assert(slot == 1);
- ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
- ins &= 0xffffffee000101ff;
- ins |= ((v & 0x8000000000000000) >> 28) | ((v & 0x0000000000200000)) |
- ((v & 0x00000000001f0000) << 6) | ((v & 0x000000000000ff80) << 20) |
- ((v & 0x000000000000007f) << 13);
- obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
- obj_ia64_ins_insert_in_bundle(bundle, ++slot, ((v & 0x7fffffffffc00000) >> 22));
- return obj_reloc_ok;
-}
-
-/*
- * create a plt entry
- */
-enum obj_reloc
-obj_ia64_generate_plt(Elf64_Addr v,
- Elf64_Addr gp,
- ia64_file_t *ifile,
- ia64_symbol_t *isym,
- ia64_plt_t *pltent)
-{
- *(Elf64_Addr *)(ifile->pltd->contents + pltent->data_offset) = v;
- if (isym->root.secidx <= SHN_HIRESERVE)
- {
- /* local entry */
- *(Elf64_Addr *)(ifile->pltd->contents + pltent->data_offset + 8) = gp;
- memcpy((Elf64_Addr *)(ifile->pltt->contents + pltent->text_offset),
- ia64_plt_local, sizeof(ia64_plt_local));
- }
- else
- {
- /* external entry */
- memcpy((Elf64_Addr *)(ifile->pltt->contents + pltent->text_offset),
- ia64_plt_extern, sizeof(ia64_plt_extern));
- }
- return obj_ia64_ins_imm22(
- (ifile->pltd->header.sh_addr + pltent->data_offset - gp),
- (Elf64_Addr *)(ifile->pltt->contents + pltent->text_offset), 0);
-}
-
-struct obj_section *
-obj_ia64_create_alloced_section (struct obj_file *f, const char *name,
- unsigned long align, unsigned long size, unsigned long sh_flags)
-{
- int newidx = f->header.e_shnum++;
- struct obj_section *sec;
-
- f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
- f->sections[newidx] = sec = arch_new_section();
-
- memset(sec, 0, sizeof(*sec));
- sec->header.sh_type = SHT_PROGBITS;
- sec->header.sh_flags = sh_flags;
- sec->header.sh_size = size;
- sec->header.sh_addralign = align;
- sec->name = name;
- sec->idx = newidx;
- if (size)
- sec->contents = xmalloc(size);
-
- obj_insert_section_load_order(f, sec);
-
- return sec;
-}
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- ia64_file_t *f;
- f = xmalloc(sizeof(*f));
- f->got = NULL;
- f->opd = NULL;
- f->pltt = NULL;
- f->pltd = NULL;
- return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- ia64_symbol_t *sym;
- sym = xmalloc(sizeof(*sym));
- sym->gotent = NULL;
- sym->opdent = NULL;
- sym->pltent = NULL;
- return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- switch (sec->header.sh_type)
- {
- case SHT_IA_64_EXT :
- sec->contents = NULL;
- break;
-
- case SHT_IA_64_UNWIND :
- if (sec->header.sh_size > 0)
- {
- sec->contents = xmalloc(sec->header.sh_size);
- gzf_lseek(fp, sec->header.sh_offset, SEEK_SET);
- if (gzf_read(fp, sec->contents, sec->header.sh_size) != sec->header.sh_size)
- {
- error("error reading ELF section data: %m");
- return -1;
- }
- }
- else
- sec->contents = NULL;
- break;
-
- default:
- error("Unknown section header type: %08x", sec->header.sh_type);
- return -1;
- }
- return 0;
-}
-
-int
-arch_create_got(struct obj_file *f)
-{
- ia64_file_t *ifile = (ia64_file_t *)f;
- int i;
- int n;
- int got_offset = 0;
- int opd_offset = 32;
- int plt_text_offset = 0;
- int plt_data_offset = 0;
-
- n = ifile->root.header.e_shnum;
- for (i = 0; i < n; ++i)
- {
- struct obj_section *relsec, *symsec, *strsec;
- Elf64_Rela *rel, *relend;
- Elf64_Sym *symtab;
- const char *strtab;
-
- relsec = ifile->root.sections[i];
- if (relsec->header.sh_type != SHT_RELA)
- continue;
-
- symsec = ifile->root.sections[relsec->header.sh_link];
- strsec = ifile->root.sections[symsec->header.sh_link];
-
- rel = (Elf64_Rela *)relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(Elf64_Rela));
- symtab = (Elf64_Sym *)symsec->contents;
- strtab = (const char *)strsec->contents;
-
- for (; rel < relend; ++rel)
- {
- int need_got = FALSE;
- int need_opd = FALSE;
- int need_plt = FALSE;
-
- switch (ELF64_R_TYPE(rel->r_info))
- {
- default:
- continue;
-
- case R_IA64_FPTR64I : /* @fptr(sym + add), mov imm64 */
- case R_IA64_FPTR32LSB : /* @fptr(sym + add), data4 LSB */
- case R_IA64_FPTR64LSB : /* @fptr(sym + add), data8 LSB */
- need_opd = TRUE;
- break;
-
- case R_IA64_LTOFF22 : /* @ltoff(sym + add), add imm22 */
- case R_IA64_LTOFF22X :
- case R_IA64_LTOFF64I : /* @ltoff(sym + add), mov imm64 */
- need_got = TRUE;
- break;
-
- case R_IA64_LTOFF_FPTR22 : /* @ltoff(@fptr(s+a)), imm22 */
- case R_IA64_LTOFF_FPTR64I : /* @ltoff(@fptr(s+a)), imm64 */
- case R_IA64_LTOFF_FPTR32LSB :
- case R_IA64_LTOFF_FPTR64LSB :
- need_got = TRUE;
- need_opd = TRUE;
- break;
-
- case R_IA64_PLTOFF22 : /* @pltoff(sym + add), add imm22 */
- case R_IA64_PLTOFF64I : /* @pltoff(sym + add), mov imm64 */
- case R_IA64_PLTOFF64LSB : /* @pltoff(sym + add), data8 LSB */
-
- case R_IA64_PCREL21B : /* @pcrel(sym + add), ptb, call */
- case R_IA64_PCREL21M : /* @pcrel(sym + add), chk.s */
- case R_IA64_PCREL21F : /* @pcrel(sym + add), fchkf */
- need_plt = TRUE;
- break;
- }
-
- if (need_got || need_opd || need_plt)
- {
- Elf64_Sym *extsym;
- ia64_symbol_t *isym;
- const char *name;
- int local;
- unsigned long symndx;
-
- symndx = ELF64_R_SYM(rel->r_info);
- extsym = &symtab[symndx];
- if (ELF64_ST_BIND(extsym->st_info) == STB_LOCAL)
- {
- isym = (ia64_symbol_t *) f->local_symtab[symndx];
- }
- else
- {
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- isym = (ia64_symbol_t *)obj_find_symbol(f, name);
- }
- local = isym->root.secidx <= SHN_HIRESERVE;
-
- if (need_plt)
- {
- ia64_plt_t *plt;
-
- for (plt = isym->pltent; plt != NULL; plt = plt->next)
- if (plt->addend == rel->r_addend)
- break;
- if (plt == NULL)
- {
- plt = (ia64_plt_t *) xmalloc(sizeof(ia64_plt_t));
- plt->next = isym->pltent;
- plt->addend = rel->r_addend;
- plt->text_offset = plt_text_offset;
- plt->data_offset = plt_data_offset;
- plt->reloc_done = FALSE;
- isym->pltent = plt;
- if (local)
- {
- plt_text_offset += sizeof(ia64_plt_local);
- plt_data_offset += 16;
- }
- else
- {
- plt_text_offset += sizeof(ia64_plt_extern);
- plt_data_offset += 8;
- }
- need_plt = FALSE;
- }
- }
- if (need_got)
- {
- ia64_got_t *got;
-
- for (got = isym->gotent; got != NULL; got = got->next)
- if (got->addend == rel->r_addend)
- break;
- if (got == NULL)
- {
- got = (ia64_got_t *) xmalloc(sizeof(ia64_got_t));
- got->next = isym->gotent;
- got->addend = rel->r_addend;
- got->offset = got_offset;
- got->reloc_done = FALSE;
- isym->gotent = got;
- got_offset += 8;
- need_got = FALSE;
- }
- }
- if (need_opd && local)
- {
- ia64_opd_t *opd;
-
- if (isym->opdent == NULL)
- {
- opd = (ia64_opd_t *) xmalloc(sizeof(ia64_opd_t));
- opd->offset = opd_offset;
- opd->reloc_done = FALSE;
- isym->opdent = opd;
- opd_offset += 16;
- need_opd = FALSE;
- }
- }
- }
- }
- }
-
- ifile->got = obj_ia64_create_alloced_section(f, ".got", 8, got_offset,
- (SHF_ALLOC | SHF_WRITE | SHF_IA_64_SHORT));
- assert(ifile->got != NULL);
-
- ifile->opd = obj_ia64_create_alloced_section(f, ".opd", 16, opd_offset,
- (SHF_ALLOC | SHF_WRITE | SHF_IA_64_SHORT));
- assert(ifile->opd != NULL);
-
- if (plt_text_offset > 0)
- {
- ifile->pltt = obj_ia64_create_alloced_section(f, ".plt", 16,
- plt_text_offset, (SHF_ALLOC | SHF_EXECINSTR | SHF_IA_64_SHORT));
- ifile->pltd = obj_ia64_create_alloced_section(f, ".IA_64.pltoff",
- 16, plt_data_offset, (SHF_ALLOC | SHF_WRITE | SHF_IA_64_SHORT));
- assert(ifile->pltt != NULL);
- assert(ifile->pltd != NULL);
- }
-
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
- ia64_file_t *ifile = (ia64_file_t *)f;
- Elf64_Addr min_addr = (Elf64_Addr) -1;
- Elf64_Addr max_addr = 0;
- Elf64_Addr min_short_addr = (Elf64_Addr) -1;
- Elf64_Addr max_short_addr = 0;
- Elf64_Addr gp;
- Elf64_Addr text = (Elf64_Addr) -1;
- Elf64_Addr data = (Elf64_Addr) -1;
- Elf64_Addr bss = (Elf64_Addr) -1;
- int n = f->header.e_shnum;
- int i;
-
- /*
- * Finalize the addresses of the sections, find the min and max
- * address of all sections marked short, and collect min and max
- * address of any type, for use in selecting a nice gp.
- *
- * The algorithm used for selecting set the GP value was taken from
- * the ld/bfd code contributed by David Mosberger-Tang <davidm@hpl.hp.com>
- */
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- {
- Elf64_Shdr *header = &f->sections[i]->header;
- Elf64_Addr lo;
- Elf64_Addr hi;
-
- header->sh_addr += base;
- if (header->sh_flags & SHF_ALLOC)
- {
- lo = header->sh_addr;
- hi = header->sh_addr + header->sh_size;
- if (hi < lo)
- hi = (Elf64_Addr) -1;
-
- if (min_addr > lo)
- min_addr = lo;
- if (max_addr < hi)
- max_addr = hi;
- if (header->sh_flags & SHF_IA_64_SHORT)
- {
- if (min_short_addr > lo)
- min_short_addr = lo;
- if (max_short_addr < hi)
- max_short_addr = hi;
- }
- if ((header->sh_type & SHT_NOBITS) && (lo < bss))
- bss = lo;
- else if ((header->sh_flags & SHF_EXECINSTR) && (lo < text))
- text = lo;
- else if (lo < data)
- data = lo;
- }
- }
- /* Pick a sensible value for gp */
-
- /* Start with just the address of the .got */
- gp = ifile->got->header.sh_addr;
-
- /*
- * If it is possible to address the entire image, but we
- * don't with the choice above, adjust.
- */
- if ((max_addr - min_addr < 0x400000) && (max_addr - gp <= 0x200000) &&
- (gp - min_addr > 0x200000))
- {
- gp = min_addr + 0x200000;
- }
- else if (max_short_addr != 0)
- {
- /* If we don't cover all the short data, adjust */
- if (max_short_addr - gp >= 0x200000)
- gp = min_short_addr + 0x200000;
-
- /* If we're addressing stuff past the end, adjust back */
- if (gp > max_addr)
- gp = max_addr - 0x200000 + 8;
- }
-
- /*
- * Validate whether all SHF_IA_64_SHORT sections are within
- * range of the chosen GP.
- */
- if (max_short_addr != 0)
- {
- if (max_short_addr - min_short_addr >= 0x400000)
- {
- error("short data segment overflowed (0x%lx >= 0x400000)",
- (unsigned long)(max_short_addr - min_short_addr));
- return 0;
- }
- else if (((gp > min_short_addr) && (gp - min_short_addr > 0x200000)) ||
- ((gp < max_short_addr) && (max_short_addr - gp >= 0x200000)))
- {
- error("GP does not cover short data segment");
- return 0;
- }
- }
- ifile->gp = gp;
- ifile->text = text;
- ifile->data = data;
- ifile->bss = bss;
- return 1;
-}
-
-/* Targets can be unaligned, use memcpy instead of assignment */
-#define COPY_64LSB(loc, v) \
- do { \
- Elf64_Xword reloc = (v); \
- memcpy((void *)(loc), &reloc, 8); \
- } while(0)
-#define COPY_32LSB(loc, v) \
- do { \
- Elf32_Xword reloc = (v); \
- memcpy((void *)(loc), &reloc, 4); \
- if ((v) != reloc) \
- ret = obj_reloc_overflow; \
- } while(0)
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf64_Rela *rel,
- Elf64_Addr v)
-{
- ia64_file_t *ifile = (ia64_file_t *) f;
- ia64_symbol_t *isym = (ia64_symbol_t *) sym;
-
- Elf64_Addr loc = (Elf64_Addr)(targsec->contents + rel->r_offset);
- Elf64_Addr dot = (targsec->header.sh_addr + rel->r_offset) & ~0x03;
-
- Elf64_Addr got = ifile->got->header.sh_addr;
- Elf64_Addr gp = ifile->gp;
-
- Elf64_Addr *bundle = (Elf64_Addr *)(loc & ~0x03);
- Elf64_Xword slot = loc & 0x03;
-
- Elf64_Xword r_info = ELF64_R_TYPE(rel->r_info);
-
- enum obj_reloc ret = obj_reloc_ok;
-
- /* We cannot load modules compiled with -mconstant-gp */
-#ifndef EF_IA_64_CONS_GP
-#define EF_IA_64_CONS_GP 0x00000040
-#endif
-#ifndef EF_IA_64_NOFUNCDESC_CONS_GP
-#define EF_IA_64_NOFUNCDESC_CONS_GP 0x00000080
-#endif
- if (f->header.e_flags & (EF_IA_64_CONS_GP | EF_IA_64_NOFUNCDESC_CONS_GP))
- return obj_reloc_constant_gp;
-
- switch (r_info)
- {
- case R_IA64_NONE : /* none */
- case R_IA64_LDXMOV : /* Use of LTOFF22X. */
- break;
-
- case R_IA64_IMM14 : /* symbol + addend, add imm14 */
- ret = obj_ia64_ins_imm14(v, bundle, slot);
- break;
-
- case R_IA64_IMM22 : /* symbol + addend, add imm22 */
- ret = obj_ia64_ins_imm22(v, bundle, slot);
- break;
-
- case R_IA64_IMM64 : /* symbol + addend, movl imm64 */
- ret = obj_ia64_ins_imm64(v, bundle, slot);
- break;
-
- case R_IA64_DIR32LSB : /* symbol + addend, data4 LSB */
- COPY_32LSB(loc, v);
- break;
-
- case R_IA64_DIR64LSB : /* symbol + addend, data8 LSB */
- COPY_64LSB(loc, v);
- break;
-
- case R_IA64_GPREL22 : /* @gprel(sym + add), add imm22 */
- v -= gp;
- ret = obj_ia64_ins_imm22(v, bundle, slot);
- break;
-
- case R_IA64_GPREL64I : /* @gprel(sym + add), mov imm64 */
- v -= gp;
- ret = obj_ia64_ins_imm64(v, bundle, slot);
- break;
-
- case R_IA64_GPREL32LSB : /* @gprel(sym + add), data4 LSB */
- COPY_32LSB(loc, v-gp);
- break;
-
- case R_IA64_GPREL64LSB : /* @gprel(sym + add), data8 LSB */
- COPY_64LSB(loc, v-gp);
- break;
-
- case R_IA64_LTOFF22 : /* @ltoff(sym + add), add imm22 */
- case R_IA64_LTOFF22X : /* LTOFF22, relaxable. */
- case R_IA64_LTOFF64I : /* @ltoff(sym + add), mov imm64 */
- {
- ia64_got_t *ge;
-
- assert(isym != NULL);
- for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
- ge = ge->next;
- assert(ge != NULL);
- if (!ge->reloc_done)
- {
- ge->reloc_done = TRUE;
- *(Elf64_Addr *)(ifile->got->contents + ge->offset) = v;
- }
- v = got + ge->offset - gp;
- if (r_info == R_IA64_LTOFF64I)
- ret = obj_ia64_ins_imm64(v, bundle, slot);
- else
- ret = obj_ia64_ins_imm22(v, bundle, slot);
- }
- break;
-
- case R_IA64_PLTOFF22 : /* @pltoff(sym + add), add imm22 */
- case R_IA64_PLTOFF64I : /* @pltoff(sym + add), mov imm64 */
- case R_IA64_PLTOFF64LSB : /* @pltoff(sym + add), data8 LSB */
- {
- ia64_plt_t *pe;
-
- assert(isym != NULL);
- for (pe = isym->pltent; pe != NULL && pe->addend != rel->r_addend; )
- pe = pe->next;
- assert(pe != NULL);
- if (!pe->reloc_done)
- {
- pe->reloc_done = TRUE;
- ret = obj_ia64_generate_plt(v, gp, ifile, isym, pe);
- }
- v = ifile->pltt->header.sh_addr + pe->text_offset - gp;
- switch (r_info)
- {
- case R_IA64_PLTOFF22 :
- ret = obj_ia64_ins_imm22(v, bundle, slot);
- break;
-
- case R_IA64_PLTOFF64I :
- ret = obj_ia64_ins_imm64(v, bundle, slot);
- break;
-
- case R_IA64_PLTOFF64LSB :
- COPY_64LSB(loc, v);
- break;
- }
- }
- break;
-
- case R_IA64_FPTR64I : /* @fptr(sym + add), mov imm64 */
- case R_IA64_FPTR32LSB : /* @fptr(sym + add), data4 LSB */
- case R_IA64_FPTR64LSB : /* @fptr(sym + add), data8 LSB */
- assert(isym != NULL);
- if (isym->root.secidx <= SHN_HIRESERVE)
- {
- assert(isym->opdent != NULL);
- if (!isym->opdent->reloc_done)
- {
- isym->opdent->reloc_done = TRUE;
- *(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset) = v;
- *(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset + 8) = gp;
- }
- v = ifile->opd->header.sh_addr + isym->opdent->offset;
- }
- switch (r_info)
- {
- case R_IA64_FPTR64I :
- ret = obj_ia64_ins_imm64(v, bundle, slot);
- break;
-
- case R_IA64_FPTR32LSB :
- COPY_32LSB(loc, v);
- break;
-
- case R_IA64_FPTR64LSB : /* @fptr(sym + add), data8 LSB */
- /* Target can be unaligned */
- COPY_64LSB(loc, v);
- break;
- }
- break;
-
- case R_IA64_PCREL21B : /* @pcrel(sym + add), ptb, call */
- case R_IA64_PCREL21M : /* @pcrel(sym + add), chk.s */
- case R_IA64_PCREL21F : /* @pcrel(sym + add), fchkf */
- assert(isym != NULL);
- if ((isym->root.secidx > SHN_HIRESERVE) ||
- ((Elf64_Sxword) (v - dot) > 16777215) ||
- ((Elf64_Sxword) (v - dot) < -16777216))
- {
- ia64_plt_t *pe;
-
- for (pe = isym->pltent; pe != NULL && pe->addend != rel->r_addend; )
- pe = pe->next;
- assert(pe != NULL);
- if (!pe->reloc_done)
- {
- pe->reloc_done = TRUE;
- ret = obj_ia64_generate_plt(v, gp, ifile, isym, pe);
- }
- v = ifile->pltt->header.sh_addr + pe->text_offset;
- }
- v -= dot;
- switch (r_info)
- {
- case R_IA64_PCREL21B :
- ret = obj_ia64_ins_pcrel21b(v, bundle, slot);
- break;
-
- case R_IA64_PCREL21M :
- ret = obj_ia64_ins_pcrel21m(v, bundle, slot);
- break;
-
- case R_IA64_PCREL21F :
- ret = obj_ia64_ins_pcrel21f(v, bundle, slot);
- break;
- }
- break;
-
- case R_IA64_PCREL32LSB : /* @pcrel(sym + add), data4 LSB */
- COPY_32LSB(loc, v-dot);
- break;
-
- case R_IA64_PCREL64LSB : /* @pcrel(sym + add), data8 LSB */
- COPY_64LSB(loc, v-dot);
- break;
-
- case R_IA64_LTOFF_FPTR22 : /* @ltoff(@fptr(s+a)), imm22 */
- case R_IA64_LTOFF_FPTR64I : /* @ltoff(@fptr(s+a)), imm64 */
- case R_IA64_LTOFF_FPTR32LSB : /* @ltoff(@fptr(s+a)), data4 */
- case R_IA64_LTOFF_FPTR64LSB : /* @ltoff(@fptr(s+a)), data8 */
- {
- ia64_got_t *ge;
-
- assert(isym != NULL);
- if (isym->root.secidx <= SHN_HIRESERVE)
- {
- assert(isym->opdent != NULL);
- if (!isym->opdent->reloc_done)
- {
- isym->opdent->reloc_done = TRUE;
- *(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset) = v;
- *(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset + 8) = gp;
- }
- v = ifile->opd->header.sh_addr + isym->opdent->offset;
- }
- for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
- ge = ge->next;
- assert(ge != NULL);
- if (!ge->reloc_done)
- {
- ge->reloc_done = TRUE;
- *(Elf64_Addr *)(ifile->got->contents + ge->offset) = v;
- }
- v = got + ge->offset - gp;
- switch (r_info)
- {
- case R_IA64_LTOFF_FPTR22 :
- ret = obj_ia64_ins_imm22(v, bundle, slot);
- break;
-
- case R_IA64_LTOFF_FPTR64I :
- ret = obj_ia64_ins_imm64(v, bundle, slot);
- break;
-
- case R_IA64_LTOFF_FPTR32LSB :
- COPY_32LSB(loc, v);
- break;
-
- case R_IA64_LTOFF_FPTR64LSB :
- COPY_64LSB(loc, v);
- break;
- }
- }
- break;
-
- case R_IA64_SEGREL32LSB : /* @segrel(sym + add), data4 LSB */
- case R_IA64_SEGREL64LSB : /* @segrel(sym + add), data8 LSB */
- if (targsec->header.sh_type & SHT_NOBITS)
- v = ifile->bss - v;
- else if (targsec->header.sh_flags & SHF_EXECINSTR)
- v = ifile->text - v;
- else
- v = ifile->data - v;
- if (r_info == R_IA64_SEGREL32LSB)
- COPY_32LSB(loc, v);
- else
- COPY_64LSB(loc, v);
- break;
-
- case R_IA64_SECREL32LSB : /* @secrel(sym + add), data4 LSB */
- COPY_32LSB(loc, targsec->header.sh_addr - v);
- break;
-
- case R_IA64_SECREL64LSB : /* @secrel(sym + add), data8 LSB */
- COPY_64LSB(loc, targsec->header.sh_addr - v);
- break;
-
- /*
- * We don't handle the big-endian relocates
- *
- * R_IA64_DIR32MSB symbol + addend, data4 MSB
- * R_IA64_DIR64MSB symbol + addend, data8 MSB
- * R_IA64_GPREL32MSB @gprel(sym + add), data4 MSB
- * R_IA64_GPREL64MSB @gprel(sym + add), data8 MSB
- * R_IA64_PLTOFF64MSB @pltoff(sym + add), data8 MSB
- * R_IA64_FPTR32MSB @fptr(sym + add), data4 MSB
- * R_IA64_FPTR64MSB @fptr(sym + add), data8 MSB
- * R_IA64_PCREL32MSB @pcrel(sym + add), data4 MSB
- * R_IA64_PCREL64MSB @pcrel(sym + add), data8 MSB
- * R_IA64_SEGREL32MSB @segrel(sym + add), data4 MSB
- * R_IA64_SEGREL64MSB @segrel(sym + add), data8 MSB
- * R_IA64_SECREL32MSB @secrel(sym + add), data4 MSB
- * R_IA64_SECREL64MSB @secrel(sym + add), data8 MSB
- * R_IA64_REL32MSB data 4 + REL
- * R_IA64_REL64MSB data 8 + REL
- * R_IA64_LTV32MSB symbol + addend, data4 MSB
- * R_IA64_LTV64MSB symbol + addend, data8 MSB
- * R_IA64_IPLTMSB dynamic reloc, imported PLT, MSB
- */
- default:
- case R_IA64_REL32LSB : /* data 4 + REL */
- case R_IA64_REL64LSB : /* data 8 + REL */
- case R_IA64_LTV32LSB : /* symbol + addend, data4 LSB */
- case R_IA64_LTV64LSB : /* symbol + addend, data8 LSB */
- case R_IA64_IPLTLSB : /* dynamic reloc, imported PLT, LSB */
- ret = obj_reloc_unhandled;
- break;
- }
- return ret;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- ia64_file_t *ifile = (ia64_file_t *)f;
- Elf64_Addr *opd = (Elf64_Addr *)(ifile->opd->contents);
-
- if ((opd[0] = mod->init) != 0)
- {
- opd[1] = ifile->gp;
- mod->init = ifile->opd->header.sh_addr;
- }
-
- if ((opd[2] = mod->cleanup) != 0)
- {
- opd[3] = ifile->gp;
- mod->cleanup = ifile->opd->header.sh_addr + 16;
- }
-
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *archdata_sec)
-{
- ia64_file_t *ifile = (ia64_file_t *)f;
- struct archdata {
- unsigned tgt_long unw_table;
- unsigned tgt_long segment_base;
- unsigned tgt_long unw_start;
- unsigned tgt_long unw_end;
- unsigned tgt_long gp;
- } *ad;
- int i;
- struct obj_section *sec;
-
- free(archdata_sec->contents);
- archdata_sec->contents = xmalloc(sizeof(struct archdata));
- memset(archdata_sec->contents, 0, sizeof(struct archdata));
- archdata_sec->header.sh_size = sizeof(struct archdata);
-
- ad = (struct archdata *)(archdata_sec->contents);
- ad->gp = ifile->gp;
- ad->unw_start = 0;
- ad->unw_end = 0;
- ad->unw_table = 0;
- ad->segment_base = f->sections[1]->header.sh_addr;
- for (i = 0; i < f->header.e_shnum; ++i)
- {
- sec = f->sections[i];
- if (sec->header.sh_type == SHT_IA_64_UNWIND)
- {
- ad->unw_start = sec->header.sh_addr;
- ad->unw_end = sec->header.sh_addr + sec->header.sh_size;
- break;
- }
- }
-
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_kallsyms.c b/mdk-stage1/insmod-modutils/obj/obj_kallsyms.c
deleted file mode 100644
index 8385fb892..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_kallsyms.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/* Build a section containing all non-stack symbols.
- Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <string.h>
-#include <malloc.h>
-
-#include "obj.h"
-#include "kallsyms.h"
-#include "util.h"
-
-/*======================================================================*/
-
-#define EXPAND_BY 4096 /* Arbitrary */
-
-/* Append a string to the big list of strings */
-
-static void
-append_string (const char *s, char **strings,
- ElfW(Word) *strings_size, ElfW(Word) *strings_left)
-{
- int l = strlen(s) + 1;
- while (l > *strings_left) {
- *strings = xrealloc(*strings, *strings_size += EXPAND_BY);
- *strings_left += EXPAND_BY;
- }
- memcpy((char *)*strings+*strings_size-*strings_left, s, l);
- *strings_left -= l;
-}
-
-
-/* Append a symbol to the big list of symbols */
-
-static void
-append_symbol (const struct kallsyms_symbol *s,
- struct kallsyms_symbol **symbols,
- ElfW(Word) *symbols_size, ElfW(Word) *symbols_left)
-{
- int l = sizeof(*s);
- while (l > *symbols_left) {
- *symbols = xrealloc(*symbols, *symbols_size += EXPAND_BY);
- *symbols_left += EXPAND_BY;
- }
- memcpy((char *)*symbols+*symbols_size-*symbols_left, s, l);
- *symbols_left -= l;
-}
-
-/* qsort compare routine to sort symbols */
-
-static const char *sym_strings;
-
-static int
-symbol_compare (const void *a, const void *b)
-{
- struct kallsyms_symbol *c = (struct kallsyms_symbol *) a;
- struct kallsyms_symbol *d = (struct kallsyms_symbol *) b;
-
- if (c->symbol_addr > d->symbol_addr)
- return(1);
- if (c->symbol_addr < d->symbol_addr)
- return(-1);
- return(strcmp(sym_strings+c->name_off, sym_strings+d->name_off));
-}
-
-
-/* Extract all symbols from the input obj_file, ignore ones that are
- * no use for debugging, build an output obj_file containing only the
- * kallsyms section.
- *
- * The kallsyms section is a bit unusual. It deliberately has no
- * relocatable data, all "pointers" are represented as byte offsets
- * into the the section. This means it can be stored anywhere without
- * relocation problems. In particular it can be stored within a kernel
- * image, it can be stored separately from the kernel image, it can be
- * appended to a module just before loading, it can be stored in a
- * separate area etc.
- *
- * Format of the kallsyms section.
- *
- * Header:
- * Size of header.
- * Total size of kallsyms data, including strings.
- * Number of loaded sections.
- * Offset to first section entry from start of header.
- * Size of each section entry, excluding the name string.
- * Number of symbols.
- * Offset to first symbol entry from start of header.
- * Size of each symbol entry, excluding the name string.
- *
- * Section entry - one per loaded section.
- * Start of section[1].
- * Size of section.
- * Offset to name of section, from start of strings.
- * Section flags.
- *
- * Symbol entry - one per symbol in the input file[2].
- * Offset of section that owns this symbol, from start of section data.
- * Address of symbol within the real section[1].
- * Offset to name of symbol, from start of strings.
- *
- * Notes: [1] This is an exception to the "represent pointers as
- * offsets" rule, it is a value, not an offset. The start
- * address of a section or a symbol is extracted from the
- * obj_file data which may contain absolute or relocatable
- * addresses. If the addresses are relocatable then the
- * caller must adjust the section and/or symbol entries in
- * kallsyms after relocation.
- * [2] Only symbols that fall within loaded sections are stored.
- */
-
-int
-obj_kallsyms (struct obj_file *fin, struct obj_file **fout_result)
-{
- struct obj_file *fout;
- int i, loaded = 0, *fin_to_allsym_map;
- struct obj_section *isec, *osec;
- struct kallsyms_header *a_hdr;
- struct kallsyms_section *a_sec;
- ElfW(Off) sec_off;
- struct kallsyms_symbol *symbols = NULL, a_sym;
- ElfW(Word) symbols_size = 0, symbols_left = 0;
- char *strings = NULL, *p;
- ElfW(Word) strings_size = 0, strings_left = 0;
- ElfW(Off) file_offset;
- static char strtab[] = "\000" KALLSYMS_SEC_NAME;
-
- /* Create the kallsyms section. */
- fout = arch_new_file();
- memset(fout, 0, sizeof(*fout));
- fout->symbol_cmp = strcmp;
- fout->symbol_hash = obj_elf_hash;
- fout->load_order_search_start = &fout->load_order;
-
- /* Copy file characteristics from input file and modify to suit */
- memcpy(&fout->header, &fin->header, sizeof(fout->header));
- fout->header.e_type = ET_REL; /* Output is relocatable */
- fout->header.e_entry = 0; /* No entry point */
- fout->header.e_phoff = 0; /* No program header */
- file_offset = sizeof(fout->header); /* Step over Elf header */
- fout->header.e_shoff = file_offset; /* Section headers next */
- fout->header.e_phentsize = 0; /* No program header */
- fout->header.e_phnum = 0; /* No program header */
- fout->header.e_shnum = KALLSYMS_IDX+1; /* Initial, strtab, kallsyms */
- fout->header.e_shstrndx = KALLSYMS_IDX-1; /* strtab */
- file_offset += fout->header.e_shentsize * fout->header.e_shnum;
-
- /* Populate the section data for kallsyms itself */
- fout->sections = xmalloc(sizeof(*(fout->sections))*fout->header.e_shnum);
- memset(fout->sections, 0, sizeof(*(fout->sections))*fout->header.e_shnum);
-
- fout->sections[0] = osec = arch_new_section();
- memset(osec, 0, sizeof(*osec));
- osec->header.sh_type = SHT_NULL;
- osec->header.sh_link = SHN_UNDEF;
-
- fout->sections[KALLSYMS_IDX-1] = osec = arch_new_section();
- memset(osec, 0, sizeof(*osec));
- osec->name = ".strtab";
- osec->header.sh_type = SHT_STRTAB;
- osec->header.sh_link = SHN_UNDEF;
- osec->header.sh_offset = file_offset;
- osec->header.sh_size = sizeof(strtab);
- osec->contents = xmalloc(sizeof(strtab));
- memcpy(osec->contents, strtab, sizeof(strtab));
- file_offset += osec->header.sh_size;
-
- fout->sections[KALLSYMS_IDX] = osec = arch_new_section();
- memset(osec, 0, sizeof(*osec));
- osec->name = KALLSYMS_SEC_NAME;
- osec->header.sh_name = 1; /* Offset in strtab */
- osec->header.sh_type = SHT_PROGBITS; /* Load it */
- osec->header.sh_flags = SHF_ALLOC; /* Read only data */
- osec->header.sh_link = SHN_UNDEF;
- osec->header.sh_addralign = sizeof(ElfW(Word));
- file_offset = (file_offset + osec->header.sh_addralign - 1)
- & -(osec->header.sh_addralign);
- osec->header.sh_offset = file_offset;
-
- /* How many loaded sections are there? */
- for (i = 0; i < fin->header.e_shnum; ++i) {
- if (fin->sections[i]->header.sh_flags & SHF_ALLOC)
- ++loaded;
- }
-
- /* Initial contents, header + one entry per input section. No strings. */
- osec->header.sh_size = sizeof(*a_hdr) + loaded*sizeof(*a_sec);
- a_hdr = (struct kallsyms_header *) osec->contents =
- xmalloc(osec->header.sh_size);
- memset(osec->contents, 0, osec->header.sh_size);
- a_hdr->size = sizeof(*a_hdr);
- a_hdr->sections = loaded;
- a_hdr->section_off = a_hdr->size;
- a_hdr->section_size = sizeof(*a_sec);
- a_hdr->symbol_off = osec->header.sh_size;
- a_hdr->symbol_size = sizeof(a_sym);
- a_hdr->start = (ElfW(Addr))(~0);
-
- /* Map input section numbers to kallsyms section offsets. */
- sec_off = 0; /* Offset to first kallsyms section entry */
- fin_to_allsym_map = xmalloc(sizeof(*fin_to_allsym_map)*fin->header.e_shnum);
- for (i = 0; i < fin->header.e_shnum; ++i) {
- isec = fin->sections[i];
- if (isec->header.sh_flags & SHF_ALLOC) {
- fin_to_allsym_map[isec->idx] = sec_off;
- sec_off += a_hdr->section_size;
- }
- else
- fin_to_allsym_map[isec->idx] = -1; /* Ignore this section */
- }
-
- /* Copy the loaded section data. */
- a_sec = (struct kallsyms_section *) ((char *) a_hdr + a_hdr->section_off);
- for (i = 0; i < fin->header.e_shnum; ++i) {
- isec = fin->sections[i];
- if (!(isec->header.sh_flags & SHF_ALLOC))
- continue;
- a_sec->start = isec->header.sh_addr;
- a_sec->size = isec->header.sh_size;
- a_sec->flags = isec->header.sh_flags;
- a_sec->name_off = strings_size - strings_left;
- append_string(isec->name, &strings, &strings_size, &strings_left);
- if (a_sec->start < a_hdr->start)
- a_hdr->start = a_sec->start;
- if (a_sec->start+a_sec->size > a_hdr->end)
- a_hdr->end = a_sec->start+a_sec->size;
- ++a_sec;
- }
-
- /* Build the kallsyms symbol table from the symbol hashes. */
- for (i = 0; i < HASH_BUCKETS; ++i) {
- struct obj_symbol *sym = fin->symtab[i];
- for (sym = fin->symtab[i]; sym ; sym = sym->next) {
- if (!sym || sym->secidx >= fin->header.e_shnum)
- continue;
- if ((a_sym.section_off = fin_to_allsym_map[sym->secidx]) == -1)
- continue;
- if (strcmp(sym->name, "gcc2_compiled.") == 0 ||
- strncmp(sym->name, "__insmod_", 9) == 0)
- continue;
- a_sym.symbol_addr = sym->value;
- if (fin->header.e_type == ET_REL)
- a_sym.symbol_addr += fin->sections[sym->secidx]->header.sh_addr;
- a_sym.name_off = strings_size - strings_left;
- append_symbol(&a_sym, &symbols, &symbols_size, &symbols_left);
- append_string(sym->name, &strings, &strings_size, &strings_left);
- ++a_hdr->symbols;
- }
- }
- free(fin_to_allsym_map);
-
- /* Sort the symbols into ascending order by address and name */
- sym_strings = strings; /* For symbol_compare */
- qsort((char *) symbols, (unsigned) a_hdr->symbols,
- sizeof(* symbols), symbol_compare);
- sym_strings = NULL;
-
- /* Put the lot together */
- osec->header.sh_size = a_hdr->total_size =
- a_hdr->symbol_off +
- a_hdr->symbols*a_hdr->symbol_size +
- strings_size - strings_left;
- a_hdr = (struct kallsyms_header *) osec->contents =
- xrealloc(a_hdr, a_hdr->total_size);
- p = (char *)a_hdr + a_hdr->symbol_off;
- memcpy(p, symbols, a_hdr->symbols*a_hdr->symbol_size);
- free(symbols);
- p += a_hdr->symbols*a_hdr->symbol_size;
- a_hdr->string_off = p - (char *)a_hdr;
- memcpy(p, strings, strings_size - strings_left);
- free(strings);
-
- *fout_result = fout;
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_load.c b/mdk-stage1/insmod-modutils/obj/obj_load.c
deleted file mode 100644
index 4db20a998..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_load.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/* Elf file reader.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
- obj_free() added by Björn Ekwall <bj0rn@blox.se> March 1999
- Support for kallsyms Keith Owens <kaos@ocs.com.au> April 2000
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <alloca.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include "obj.h"
-#include "util.h"
-
-/*======================================================================*/
-
-struct obj_file *
-obj_load (int fp, Elf32_Half e_type, const char *filename)
-{
- struct obj_file *f;
- ElfW(Shdr) *section_headers;
- int shnum, i;
- char *shstrtab;
-
- /* Read the file header. */
-
- f = arch_new_file();
- memset(f, 0, sizeof(*f));
- f->symbol_cmp = strcmp;
- f->symbol_hash = obj_elf_hash;
- f->load_order_search_start = &f->load_order;
-
- gzf_lseek(fp, 0, SEEK_SET);
- if (gzf_read(fp, &f->header, sizeof(f->header)) != sizeof(f->header))
- {
- error("error reading ELF header %s: %m", filename);
- return NULL;
- }
-
- if (f->header.e_ident[EI_MAG0] != ELFMAG0
- || f->header.e_ident[EI_MAG1] != ELFMAG1
- || f->header.e_ident[EI_MAG2] != ELFMAG2
- || f->header.e_ident[EI_MAG3] != ELFMAG3)
- {
- error("%s is not an ELF file", filename);
- return NULL;
- }
- if (f->header.e_ident[EI_CLASS] != ELFCLASSM
- || f->header.e_ident[EI_DATA] != ELFDATAM
- || f->header.e_ident[EI_VERSION] != EV_CURRENT
- || !MATCH_MACHINE(f->header.e_machine))
- {
- error("ELF file %s not for this architecture", filename);
- return NULL;
- }
- if (f->header.e_type != e_type && e_type != ET_NONE)
- {
- switch (e_type) {
- case ET_REL:
- error("ELF file %s not a relocatable object", filename);
- break;
- case ET_EXEC:
- error("ELF file %s not an executable object", filename);
- break;
- default:
- error("ELF file %s has wrong type, expecting %d got %d",
- filename, e_type, f->header.e_type);
- break;
- }
- return NULL;
- }
-
- /* Read the section headers. */
-
- if (f->header.e_shentsize != sizeof(ElfW(Shdr)))
- {
- error("section header size mismatch %s: %lu != %lu",
- filename,
- (unsigned long)f->header.e_shentsize,
- (unsigned long)sizeof(ElfW(Shdr)));
- return NULL;
- }
-
- shnum = f->header.e_shnum;
- f->sections = xmalloc(sizeof(struct obj_section *) * shnum);
- memset(f->sections, 0, sizeof(struct obj_section *) * shnum);
-
- section_headers = alloca(sizeof(ElfW(Shdr)) * shnum);
- gzf_lseek(fp, f->header.e_shoff, SEEK_SET);
- if (gzf_read(fp, section_headers, sizeof(ElfW(Shdr))*shnum) != sizeof(ElfW(Shdr))*shnum)
- {
- error("error reading ELF section headers %s: %m", filename);
- return NULL;
- }
-
- /* Read the section data. */
-
- for (i = 0; i < shnum; ++i)
- {
- struct obj_section *sec;
-
- f->sections[i] = sec = arch_new_section();
- memset(sec, 0, sizeof(*sec));
-
- sec->header = section_headers[i];
- sec->idx = i;
-
- switch (sec->header.sh_type)
- {
- case SHT_NULL:
- case SHT_NOTE:
- case SHT_NOBITS:
- /* ignore */
- break;
-
- case SHT_PROGBITS:
- case SHT_SYMTAB:
- case SHT_STRTAB:
- case SHT_RELM:
- if (sec->header.sh_size > 0)
- {
- sec->contents = xmalloc(sec->header.sh_size);
- gzf_lseek(fp, sec->header.sh_offset, SEEK_SET);
- if (gzf_read(fp, sec->contents, sec->header.sh_size) != sec->header.sh_size)
- {
- error("error reading ELF section data %s: %m", filename);
- return NULL;
- }
- }
- else
- sec->contents = NULL;
- break;
-
-#if SHT_RELM == SHT_REL
- case SHT_RELA:
- if (sec->header.sh_size) {
- error("RELA relocations not supported on this architecture %s", filename);
- return NULL;
- }
- break;
-#else
- case SHT_REL:
- if (sec->header.sh_size) {
- error("REL relocations not supported on this architecture %s", filename);
- return NULL;
- }
- break;
-#endif
-
- default:
- if (sec->header.sh_type >= SHT_LOPROC)
- {
- if (arch_load_proc_section(sec, fp) < 0)
- return NULL;
- break;
- }
-
- error("can't handle sections of type %ld %s",
- (long)sec->header.sh_type, filename);
- return NULL;
- }
- }
-
- /* Do what sort of interpretation as needed by each section. */
-
- shstrtab = f->sections[f->header.e_shstrndx]->contents;
-
- for (i = 0; i < shnum; ++i)
- {
- struct obj_section *sec = f->sections[i];
- sec->name = shstrtab + sec->header.sh_name;
- }
-
- for (i = 0; i < shnum; ++i)
- {
- struct obj_section *sec = f->sections[i];
-
- /* .modinfo and .modstring should be contents only but gcc has no
- * attribute for that. The kernel may have marked these sections as
- * ALLOC, ignore the allocate bit.
- */
- if (strcmp(sec->name, ".modinfo") == 0 ||
- strcmp(sec->name, ".modstring") == 0)
- sec->header.sh_flags &= ~SHF_ALLOC;
-
- if (sec->header.sh_flags & SHF_ALLOC)
- obj_insert_section_load_order(f, sec);
-
- switch (sec->header.sh_type)
- {
- case SHT_SYMTAB:
- {
- unsigned long nsym, j;
- char *strtab;
- ElfW(Sym) *sym;
-
- if (sec->header.sh_entsize != sizeof(ElfW(Sym)))
- {
- error("symbol size mismatch %s: %lu != %lu",
- filename,
- (unsigned long)sec->header.sh_entsize,
- (unsigned long)sizeof(ElfW(Sym)));
- return NULL;
- }
-
- nsym = sec->header.sh_size / sizeof(ElfW(Sym));
- strtab = f->sections[sec->header.sh_link]->contents;
- sym = (ElfW(Sym) *) sec->contents;
-
- /* Allocate space for a table of local symbols. */
- j = f->local_symtab_size = sec->header.sh_info;
- f->local_symtab = xmalloc(j *= sizeof(struct obj_symbol *));
- memset(f->local_symtab, 0, j);
-
- /* Insert all symbols into the hash table. */
- for (j = 1, ++sym; j < nsym; ++j, ++sym)
- {
- const char *name;
- if (sym->st_name)
- name = strtab+sym->st_name;
- else
- name = f->sections[sym->st_shndx]->name;
-
- obj_add_symbol(f, name, j, sym->st_info, sym->st_shndx,
- sym->st_value, sym->st_size);
-
- }
- }
- break;
- }
- }
-
- /* second pass to add relocation data to symbols */
- for (i = 0; i < shnum; ++i)
- {
- struct obj_section *sec = f->sections[i];
- switch (sec->header.sh_type)
- {
- case SHT_RELM:
- {
- unsigned long nrel, j;
- ElfW(RelM) *rel;
- struct obj_section *symtab;
- char *strtab;
- if (sec->header.sh_entsize != sizeof(ElfW(RelM)))
- {
- error("relocation entry size mismatch %s: %lu != %lu",
- filename,
- (unsigned long)sec->header.sh_entsize,
- (unsigned long)sizeof(ElfW(RelM)));
- return NULL;
- }
-
- nrel = sec->header.sh_size / sizeof(ElfW(RelM));
- rel = (ElfW(RelM) *) sec->contents;
- symtab = f->sections[sec->header.sh_link];
- strtab = f->sections[symtab->header.sh_link]->contents;
-
- /* Save the relocate type in each symbol entry. */
- for (j = 0; j < nrel; ++j, ++rel)
- {
- ElfW(Sym) *extsym;
- struct obj_symbol *intsym;
- unsigned long symndx;
- symndx = ELFW(R_SYM)(rel->r_info);
- if (symndx)
- {
- extsym = ((ElfW(Sym) *) symtab->contents) + symndx;
- if (ELFW(ST_BIND)(extsym->st_info) == STB_LOCAL)
- {
- /* Local symbols we look up in the local table to be sure
- we get the one that is really intended. */
- intsym = f->local_symtab[symndx];
- }
- else
- {
- /* Others we look up in the hash table. */
- const char *name;
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym = obj_find_symbol(f, name);
- }
- intsym->r_type = ELFW(R_TYPE)(rel->r_info);
- }
- }
- }
- break;
- }
- }
-
- f->filename = xstrdup(filename);
-
- return f;
-}
-
-void obj_free(struct obj_file *f)
-{
- struct obj_section *sec;
- struct obj_symbol *sym;
- struct obj_symbol *next;
- int i;
- int n;
-
- if (f->sections) {
- n = f->header.e_shnum;
- for (i = 0; i < n; ++i) {
- if ((sec = f->sections[i]) != NULL) {
- if (sec->contents)
- free(sec->contents);
- free(sec);
- }
- }
- free(f->sections);
- }
-
- for (i = 0; i < HASH_BUCKETS; ++i) {
- for (sym = f->symtab[i]; sym; sym = next) {
- next = sym->next;
- free(sym);
- }
- }
-
- if (f->local_symtab)
- free(f->local_symtab);
-
- if (f->filename)
- free((char *)(f->filename));
-
- if (f->persist)
- free((char *)(f->persist));
-
- free(f);
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_m68k.c b/mdk-stage1/insmod-modutils/obj/obj_m68k.c
deleted file mode 100644
index cb485aed7..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_m68k.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* m68k specific support for Elf loading and relocation.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- return xmalloc(sizeof(struct obj_file));
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- return xmalloc(sizeof(struct obj_symbol));
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- /* Assume it's just a debugging section that we can safely
- ignore ... */
- sec->contents = NULL;
-
- return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf32_Rela *rel,
- Elf32_Addr v)
-{
- char *loc = targsec->contents + rel->r_offset;
- Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- case R_68K_NONE:
- break;
-
- case R_68K_8:
- if (v > 0xff)
- ret = obj_reloc_overflow;
- *(char *)loc = v;
- break;
- case R_68K_16:
- if (v > 0xffff)
- ret = obj_reloc_overflow;
- *(short *)loc = v;
- break;
- case R_68K_32:
- *(int *)loc = v;
- break;
-
- case R_68K_PC8:
- v -= dot;
- if ((Elf32_Sword)v > 0x7f || (Elf32_Sword)v < -(Elf32_Sword)0x80)
- ret = obj_reloc_overflow;
- *(char *)loc = v;
- break;
- case R_68K_PC16:
- v -= dot;
- if ((Elf32_Sword)v > 0x7fff || (Elf32_Sword)v < -(Elf32_Sword)0x8000)
- ret = obj_reloc_overflow;
- *(short *)loc = v;
- break;
- case R_68K_PC32:
- *(int *)loc = v - dot;
- break;
-
- case R_68K_RELATIVE:
- *(int *)loc += ef->baseaddr;
- break;
-
- default:
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int
-arch_create_got (struct obj_file *ef)
-{
- return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_mips.c b/mdk-stage1/insmod-modutils/obj/obj_mips.c
deleted file mode 100644
index c2315b659..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_mips.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/* MIPS specific support for Elf loading and relocation.
- Copyright 1997, 1998 Linux International.
- Contributed by Ralf Baechle <ralf@gnu.ai.mit.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <stdlib.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct mips_hi16
-{
- struct mips_hi16 *next;
- Elf32_Addr *addr;
- Elf32_Addr value;
-};
-
-struct mips_file
-{
- struct obj_file root;
- struct mips_hi16 *mips_hi16_list;
-};
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- struct mips_file *mf;
-
- mf = xmalloc(sizeof(*mf));
- mf->mips_hi16_list = NULL;
-
- return (struct obj_file *) mf;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- return xmalloc(sizeof(struct obj_symbol));
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- switch (sec->header.sh_type)
- {
- case SHT_MIPS_DEBUG:
- case SHT_MIPS_REGINFO:
- /* Actually these two sections are as useless as something can be ... */
- sec->contents = NULL;
- break;
-
- case SHT_MIPS_LIBLIST:
- case SHT_MIPS_CONFLICT:
- case SHT_MIPS_GPTAB:
- case SHT_MIPS_UCODE:
- case SHT_MIPS_OPTIONS:
- case SHT_MIPS_DWARF:
- case SHT_MIPS_EVENTS:
- /* These shouldn't ever be in a module file. */
- error("Unhandled section header type: %08x", sec->header.sh_type);
-
- default:
- /* We don't even know the type. This time it might as well be a
- supernova. */
- error("Unknown section header type: %08x", sec->header.sh_type);
- return -1;
- }
-
- return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf32_Rel *rel,
- Elf32_Addr v)
-{
- struct mips_file *mf = (struct mips_file *)f;
- Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
- Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
- enum obj_reloc ret = obj_reloc_ok;
-
- /* _gp_disp is a magic symbol for PIC which is not supported for
- the kernel and loadable modules. */
- if (strcmp(sym->name, "_gp_disp") == 0)
- ret = obj_reloc_unhandled;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- case R_MIPS_NONE:
- break;
-
- case R_MIPS_32:
- *loc += v;
- break;
-
- case R_MIPS_26:
- if (v % 4)
- ret = obj_reloc_dangerous;
- if ((v & 0xf0000000) != ((dot + 4) & 0xf0000000))
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x03ffffff) | ((*loc + (v >> 2)) & 0x03ffffff);
- break;
-
- case R_MIPS_HI16:
- {
- struct mips_hi16 *n;
-
- /* We cannot relocate this one now because we don't know the value
- of the carry we need to add. Save the information, and let LO16
- do the actual relocation. */
- n = (struct mips_hi16 *) xmalloc (sizeof *n);
- n->addr = loc;
- n->value = v;
- n->next = mf->mips_hi16_list;
- mf->mips_hi16_list = n;
- break;
- }
-
- case R_MIPS_LO16:
- {
- unsigned long insnlo = *loc;
- Elf32_Addr val, vallo;
-
- /* Sign extend the addend we extract from the lo insn. */
- vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
- if (mf->mips_hi16_list != NULL)
- {
- struct mips_hi16 *l;
-
- l = mf->mips_hi16_list;
- while (l != NULL)
- {
- struct mips_hi16 *next;
- unsigned long insn;
-
- /* The value for the HI16 had best be the same. */
- assert(v == l->value);
-
- /* Do the HI16 relocation. Note that we actually don't
- need to know anything about the LO16 itself, except where
- to find the low 16 bits of the addend needed by the LO16. */
- insn = *l->addr;
- val = ((insn & 0xffff) << 16) + vallo;
- val += v;
-
- /* Account for the sign extension that will happen in the
- low bits. */
- val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
- insn = (insn &~ 0xffff) | val;
- *l->addr = insn;
-
- next = l->next;
- free(l);
- l = next;
- }
-
- mf->mips_hi16_list = NULL;
- }
-
- /* Ok, we're done with the HI16 relocs. Now deal with the LO16. */
- val = v + vallo;
- insnlo = (insnlo & ~0xffff) | (val & 0xffff);
- *loc = insnlo;
- break;
- }
-
- default:
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
- return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_ppc.c b/mdk-stage1/insmod-modutils/obj/obj_ppc.c
deleted file mode 100644
index 89bb8e46b..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_ppc.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/* PowerPC specific support for Elf loading and relocation.
- Copyright 1996, 1997 Linux International.
-
- Adapted by Paul Mackerras <paulus@cs.anu.edu.au> from the
- obj-sparc.c and obj-alpha.c files.
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-#include <assert.h>
-
-
-/*======================================================================*/
-
-/*
- * Unfortunately, the bl (branch-and-link) instruction used for
- * procedure calls on the PowerPC can only reach +/- 32MB from the
- * current instruction. If the module is loaded far enough away from
- * the main kernel text (or other modules) that this limit is
- * exceeded, we have to redirect procedure calls via a procedure
- * linkage table (PLT). Each entry in the PLT contains instructions
- * to put the address of the procedure in a register and jump to it.
- */
-
-typedef unsigned int instruction; /* a powerpc instruction (4 bytes) */
-
-struct ppc_plt_entry
-{
- struct ppc_plt_entry *next;
- ElfW(Addr) addend;
- int offset;
- int inited;
-};
-
-struct ppc_file
-{
- struct obj_file file;
- struct obj_section *plt;
-};
-
-struct ppc_symbol
-{
- struct obj_symbol sym;
- struct ppc_plt_entry *plt_entries;
-};
-
-struct obj_file *
-arch_new_file (void)
-{
- struct ppc_file *f;
-
- f = xmalloc(sizeof(struct ppc_file));
- f->plt = NULL;
- return &f->file;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- struct ppc_symbol *p;
-
- p = xmalloc(sizeof(struct ppc_symbol));
- p->plt_entries = NULL;
- return &p->sym;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- /* Assume it's just a debugging section that we can safely
- ignore ... */
- sec->contents = NULL;
-
- return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf32_Rela *rel,
- Elf32_Addr v)
-{
- Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
- Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
- struct ppc_file *pf = (struct ppc_file *) ef;
- struct ppc_symbol *psym = (struct ppc_symbol *) sym;
- struct ppc_plt_entry *pe;
- instruction *ip;
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- case R_PPC_ADDR16_HA:
- *(unsigned short *)loc = (v + 0x8000) >> 16;
- break;
-
- case R_PPC_ADDR16_HI:
- *(unsigned short *)loc = v >> 16;
- break;
-
- case R_PPC_ADDR16_LO:
- *(unsigned short *)loc = v;
- break;
-
- case R_PPC_REL24:
- /* find the plt entry and initialize it if necessary */
- assert(psym != NULL);
- for (pe = psym->plt_entries; pe != NULL && pe->addend != rel->r_addend; )
- pe = pe->next;
- assert(pe != NULL);
- if (!pe->inited)
- {
- ip = (instruction *) (pf->plt->contents + pe->offset);
- ip[0] = 0x3d600000 + ((v + 0x8000) >> 16); /* lis r11,sym@ha */
- ip[1] = 0x396b0000 + (v & 0xffff); /* addi r11,r11,sym@l */
- ip[2] = 0x7d6903a6; /* mtctr r11 */
- ip[3] = 0x4e800420; /* bctr */
- pe->inited = 1;
- }
-
- v -= dot;
- if ((int)v < -0x02000000 || (int)v >= 0x02000000)
- {
- /* go via the plt */
- v = pf->plt->header.sh_addr + pe->offset - dot;
- }
- if (v & 3)
- ret = obj_reloc_dangerous;
- *loc = (*loc & ~0x03fffffc) | (v & 0x03fffffc);
- break;
-
- case R_PPC_REL32:
- *loc = v - dot;
- break;
-
- case R_PPC_ADDR32:
- *loc = v;
- break;
-
- default:
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
- struct ppc_file *pf = (struct ppc_file *) f;
- int i, offset;
- struct obj_section *sec, *syms, *strs;
- ElfW(Rela) *rel, *relend;
- ElfW(Sym) *symtab, *extsym;
- const char *strtab, *name;
- struct ppc_symbol *intsym;
- struct ppc_plt_entry *pe;
-
- offset = 0;
- for (i = 0; i < f->header.e_shnum; ++i)
- {
- sec = f->sections[i];
- if (sec->header.sh_type != SHT_RELM)
- continue;
- syms = f->sections[sec->header.sh_link];
- strs = f->sections[syms->header.sh_link];
-
- rel = (ElfW(RelM) *) sec->contents;
- relend = rel + (sec->header.sh_size / sizeof(ElfW(RelM)));
- symtab = (ElfW(Sym) *) syms->contents;
- strtab = (const char *) strs->contents;
-
- for (; rel < relend; ++rel)
- {
- if (ELF32_R_TYPE(rel->r_info) != R_PPC_REL24)
- continue;
- extsym = &symtab[ELF32_R_SYM(rel->r_info)];
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym = (struct ppc_symbol *) obj_find_symbol(f, name);
-
- for (pe = intsym->plt_entries; pe != NULL; pe = pe->next)
- if (pe->addend == rel->r_addend)
- break;
- if (pe == NULL)
- {
- pe = xmalloc(sizeof(struct ppc_plt_entry));
- pe->next = intsym->plt_entries;
- pe->addend = rel->r_addend;
- pe->offset = offset;
- pe->inited = 0;
- intsym->plt_entries = pe;
- offset += 16;
- }
- }
- }
-
- pf->plt = obj_create_alloced_section(f, ".plt", 16, offset);
-
- return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_reloc.c b/mdk-stage1/insmod-modutils/obj/obj_reloc.c
deleted file mode 100644
index f5f2de90d..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_reloc.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/* Elf relocation routines.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-#include <alloca.h>
-
-#include <obj.h>
-#include <util.h>
-
-/*======================================================================*/
-
-int
-obj_string_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
- const char *string)
-{
- struct obj_string_patch_struct *p;
- struct obj_section *strsec;
- size_t len = strlen(string)+1;
- char *loc;
-
- p = xmalloc(sizeof(*p));
- p->next = f->string_patches;
- p->reloc_secidx = secidx;
- p->reloc_offset = offset;
- f->string_patches = p;
-
- strsec = obj_find_section(f, ".kstrtab");
- if (strsec == NULL)
- {
- strsec = obj_create_alloced_section(f, ".kstrtab", 1, len);
- p->string_offset = 0;
- loc = strsec->contents;
- }
- else
- {
- p->string_offset = strsec->header.sh_size;
- loc = obj_extend_section(strsec, len);
- }
- memcpy(loc, string, len);
-
- return 1;
-}
-
-int
-obj_symbol_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
- struct obj_symbol *sym)
-{
- struct obj_symbol_patch_struct *p;
-
- p = xmalloc(sizeof(*p));
- p->next = f->symbol_patches;
- p->reloc_secidx = secidx;
- p->reloc_offset = offset;
- p->sym = sym;
- f->symbol_patches = p;
-
- return 1;
-}
-
-int
-obj_check_undefineds(struct obj_file *f, int quiet)
-{
- unsigned long i;
- int ret = 1;
-
- for (i = 0; i < HASH_BUCKETS; ++i)
- {
- struct obj_symbol *sym;
- for (sym = f->symtab[i]; sym ; sym = sym->next)
- if (sym->secidx == SHN_UNDEF)
- {
- if (ELFW(ST_BIND)(sym->info) == STB_WEAK)
- {
- sym->secidx = SHN_ABS;
- sym->value = 0;
- }
- else if (sym->r_type) /* assumes R_arch_NONE is 0 on all arch */
- {
- if (!quiet)
- error("unresolved symbol %s", sym->name);
- ret = 0;
- }
- }
- }
-
- return ret;
-}
-
-void
-obj_clear_undefineds(struct obj_file *f)
-{
- unsigned long i;
- struct obj_symbol *sym;
- for (i = 0; i < HASH_BUCKETS; ++i)
- {
- for (sym = f->symtab[i]; sym ; sym = sym->next)
- if (sym->secidx == SHN_UNDEF)
- {
- sym->secidx = SHN_ABS;
- sym->value = 0;
- }
- }
-}
-
-void
-obj_allocate_commons(struct obj_file *f)
-{
- struct common_entry
- {
- struct common_entry *next;
- struct obj_symbol *sym;
- } *common_head = NULL;
-
- unsigned long i;
-
- for (i = 0; i < HASH_BUCKETS; ++i)
- {
- struct obj_symbol *sym;
- for (sym = f->symtab[i]; sym ; sym = sym->next)
- if (sym->secidx == SHN_COMMON)
- {
- /* Collect all COMMON symbols and sort them by size so as to
- minimize space wasted by alignment requirements. */
- {
- struct common_entry **p, *n;
- for (p = &common_head; *p ; p = &(*p)->next)
- if (sym->size <= (*p)->sym->size)
- break;
-
- n = alloca(sizeof(*n));
- n->next = *p;
- n->sym = sym;
- *p = n;
- }
- }
- }
-
- for (i = 1; i < f->local_symtab_size; ++i)
- {
- struct obj_symbol *sym = f->local_symtab[i];
- if (sym && sym->secidx == SHN_COMMON)
- {
- struct common_entry **p, *n;
- for (p = &common_head; *p ; p = &(*p)->next)
- if (sym == (*p)->sym)
- break;
- else if (sym->size < (*p)->sym->size)
- {
- n = alloca(sizeof(*n));
- n->next = *p;
- n->sym = sym;
- *p = n;
- break;
- }
- }
- }
-
- if (common_head)
- {
- /* Find the bss section. */
- for (i = 0; i < f->header.e_shnum; ++i)
- if (f->sections[i]->header.sh_type == SHT_NOBITS)
- break;
-
- /* If for some reason there hadn't been one, create one. */
- if (i == f->header.e_shnum)
- {
- struct obj_section *sec;
-
- f->sections = xrealloc(f->sections, (i+1) * sizeof(sec));
- f->sections[i] = sec = arch_new_section();
- f->header.e_shnum = i+1;
-
- memset(sec, 0, sizeof(*sec));
- sec->header.sh_type = SHT_PROGBITS;
- sec->header.sh_flags = SHF_WRITE|SHF_ALLOC;
- sec->name = ".bss";
- sec->idx = i;
- }
-
- /* Allocate the COMMONS. */
- {
- ElfW(Addr) bss_size = f->sections[i]->header.sh_size;
- ElfW(Addr) max_align = f->sections[i]->header.sh_addralign;
- struct common_entry *c;
-
- for (c = common_head; c ; c = c->next)
- {
- ElfW(Addr) align = c->sym->value;
-
- if (align > max_align)
- max_align = align;
- if (bss_size & (align - 1))
- bss_size = (bss_size | (align - 1)) + 1;
-
- c->sym->secidx = i;
- c->sym->value = bss_size;
-
- bss_size += c->sym->size;
- }
-
- f->sections[i]->header.sh_size = bss_size;
- f->sections[i]->header.sh_addralign = max_align;
- }
- }
-
- /* For the sake of patch relocation and parameter initialization,
- allocate zeroed data for NOBITS sections now. Note that after
- this we cannot assume NOBITS are really empty. */
- for (i = 0; i < f->header.e_shnum; ++i)
- {
- struct obj_section *s = f->sections[i];
- if (s->header.sh_type == SHT_NOBITS)
- {
- if (s->header.sh_size)
- s->contents = memset(xmalloc(s->header.sh_size),
- 0, s->header.sh_size);
- else
- s->contents = NULL;
- s->header.sh_type = SHT_PROGBITS;
- }
- }
-}
-
-unsigned long
-obj_load_size (struct obj_file *f)
-{
- unsigned long dot = 0;
- struct obj_section *sec;
-
- /* Finalize the positions of the sections relative to one another. */
-
- for (sec = f->load_order; sec ; sec = sec->load_next)
- {
- ElfW(Addr) align;
-
- align = sec->header.sh_addralign;
- if (align && (dot & (align - 1)))
- dot = (dot | (align - 1)) + 1;
-
- sec->header.sh_addr = dot;
- dot += sec->header.sh_size;
- }
-
- return dot;
-}
-
-int
-obj_relocate (struct obj_file *f, ElfW(Addr) base)
-{
- int i, n = f->header.e_shnum;
- int ret = 1;
-
- /* Finalize the addresses of the sections. */
-
- arch_finalize_section_address(f, base);
-
- /* And iterate over all of the relocations. */
-
- for (i = 0; i < n; ++i)
- {
- struct obj_section *relsec, *symsec, *targsec, *strsec;
- ElfW(RelM) *rel, *relend;
- ElfW(Sym) *symtab;
- const char *strtab;
-
- relsec = f->sections[i];
- if (relsec->header.sh_type != SHT_RELM)
- continue;
-
- symsec = f->sections[relsec->header.sh_link];
- targsec = f->sections[relsec->header.sh_info];
- strsec = f->sections[symsec->header.sh_link];
-
- rel = (ElfW(RelM) *)relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(ElfW(RelM)));
- symtab = (ElfW(Sym) *)symsec->contents;
- strtab = (const char *)strsec->contents;
-
- for (; rel < relend; ++rel)
- {
- ElfW(Addr) value = 0;
- struct obj_symbol *intsym = NULL;
- unsigned long symndx;
- ElfW(Sym) *extsym = 0;
- const char *errmsg;
-
- /* Attempt to find a value to use for this relocation. */
-
- symndx = ELFW(R_SYM)(rel->r_info);
- if (symndx)
- {
- /* Note we've already checked for undefined symbols. */
-
- extsym = &symtab[symndx];
- if (ELFW(ST_BIND)(extsym->st_info) == STB_LOCAL)
- {
- /* Local symbols we look up in the local table to be sure
- we get the one that is really intended. */
- intsym = f->local_symtab[symndx];
- }
- else
- {
- /* Others we look up in the hash table. */
- const char *name;
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym = obj_find_symbol(f, name);
- }
-
- value = obj_symbol_final_value(f, intsym);
- }
-
-#if SHT_RELM == SHT_RELA
-#if defined(__alpha__) && defined(AXP_BROKEN_GAS)
- /* Work around a nasty GAS bug, that is fixed as of 2.7.0.9. */
- if (!extsym || !extsym->st_name ||
- ELFW(ST_BIND)(extsym->st_info) != STB_LOCAL)
-#endif
- value += rel->r_addend;
-#endif
-
- /* Do it! */
- switch (arch_apply_relocation(f,targsec,symsec,intsym,rel,value))
- {
- case obj_reloc_ok:
- break;
-
- case obj_reloc_overflow:
- errmsg = "Relocation overflow";
- goto bad_reloc;
- case obj_reloc_dangerous:
- errmsg = "Dangerous relocation";
- goto bad_reloc;
- case obj_reloc_unhandled:
- errmsg = "Unhandled relocation";
- goto bad_reloc;
- case obj_reloc_constant_gp:
- errmsg = "Modules compiled with -mconstant-gp cannot be loaded";
- goto bad_reloc;
- bad_reloc:
- if (extsym)
- {
- error("%s of type %ld for %s", errmsg,
- (long)ELFW(R_TYPE)(rel->r_info),
- strtab + extsym->st_name);
- }
- else
- {
- error("%s of type %ld", errmsg,
- (long)ELFW(R_TYPE)(rel->r_info));
- }
- ret = 0;
- break;
- }
- }
- }
-
- /* Finally, take care of the patches. */
-
- if (f->string_patches)
- {
- struct obj_string_patch_struct *p;
- struct obj_section *strsec;
- ElfW(Addr) strsec_base;
- strsec = obj_find_section(f, ".kstrtab");
- strsec_base = strsec->header.sh_addr;
-
- for (p = f->string_patches; p ; p = p->next)
- {
- struct obj_section *targsec = f->sections[p->reloc_secidx];
- *(ElfW(Addr) *)(targsec->contents + p->reloc_offset)
- = strsec_base + p->string_offset;
- }
- }
-
- if (f->symbol_patches)
- {
- struct obj_symbol_patch_struct *p;
-
- for (p = f->symbol_patches; p; p = p->next)
- {
- struct obj_section *targsec = f->sections[p->reloc_secidx];
- *(ElfW(Addr) *)(targsec->contents + p->reloc_offset)
- = obj_symbol_final_value(f, p->sym);
- }
- }
-
- return ret;
-}
-
-int
-obj_create_image (struct obj_file *f, char *image)
-{
- struct obj_section *sec;
- ElfW(Addr) base = f->baseaddr;
-
- for (sec = f->load_order; sec ; sec = sec->load_next)
- {
- char *secimg;
-
- if (sec->contents == 0)
- continue;
-
- secimg = image + (sec->header.sh_addr - base);
-
- /* Note that we allocated data for NOBITS sections earlier. */
- memcpy(secimg, sec->contents, sec->header.sh_size);
- }
-
- return 1;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_s390.c b/mdk-stage1/insmod-modutils/obj/obj_s390.c
deleted file mode 100644
index 3da72e771..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_s390.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/* S/390 specific support for Elf loading and relocation.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct s390_got_entry
-{
- int offset;
- unsigned offset_done : 1;
- unsigned reloc_done : 1;
-};
-
-struct s390_file
-{
- struct obj_file root;
- struct obj_section *got;
-};
-
-struct s390_symbol
-{
- struct obj_symbol root;
- struct s390_got_entry gotent;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- struct s390_file *f;
- f = xmalloc(sizeof(*f));
- f->got = NULL;
- return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- struct s390_symbol *sym;
- sym = xmalloc(sizeof(*sym));
- memset(&sym->gotent, 0, sizeof(sym->gotent));
- return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- /* Assume it's just a debugging section that we can safely
- ignore ... */
- sec->contents = NULL;
-
- return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf32_Rela *rel,
- Elf32_Addr v)
-{
- struct s390_file *ifile = (struct s390_file *)f;
- struct s390_symbol *isym = (struct s390_symbol *)sym;
-
- Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
- Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
- Elf32_Addr got = ifile->got ? ifile->got->header.sh_addr : 0;
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- case R_390_NONE:
- break;
-
- case R_390_32:
- *loc += v;
- break;
-
- case R_390_PLT32:
- case R_390_PC32:
- *loc += v - dot;
- break;
-
- case R_390_GLOB_DAT:
- case R_390_JMP_SLOT:
- *loc = v;
- break;
-
- case R_390_RELATIVE:
- *loc += f->baseaddr;
- break;
-
- case R_390_GOTPC:
- assert(got != 0);
- *loc += got - dot;
- break;
-
- case R_390_GOT32:
- assert(isym != NULL);
- if (!isym->gotent.reloc_done)
- {
- isym->gotent.reloc_done = 1;
- *(Elf32_Addr *)(ifile->got->contents + isym->gotent.offset) = v;
- }
- *loc += isym->gotent.offset;
- break;
-
- case R_390_GOTOFF:
- assert(got != 0);
- *loc += v - got;
- break;
-
- default:
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
- struct s390_file *ifile = (struct s390_file *)f;
- int i, n, offset = 0, gotneeded = 0;
-
- n = ifile->root.header.e_shnum;
- for (i = 0; i < n; ++i)
- {
- struct obj_section *relsec, *symsec, *strsec;
- Elf32_Rel *rel, *relend;
- Elf32_Sym *symtab;
- const char *strtab;
-
- relsec = ifile->root.sections[i];
- if (relsec->header.sh_type != SHT_REL)
- continue;
-
- symsec = ifile->root.sections[relsec->header.sh_link];
- strsec = ifile->root.sections[symsec->header.sh_link];
-
- rel = (Elf32_Rel *)relsec->contents;
- relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rel));
- symtab = (Elf32_Sym *)symsec->contents;
- strtab = (const char *)strsec->contents;
-
- for (; rel < relend; ++rel)
- {
- Elf32_Sym *extsym;
- struct s390_symbol *intsym;
- const char *name;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- case R_390_GOTPC:
- case R_390_GOTOFF:
- gotneeded = 1;
- default:
- continue;
-
- case R_390_GOT32:
- break;
- }
-
- extsym = &symtab[ELF32_R_SYM(rel->r_info)];
- if (extsym->st_name)
- name = strtab + extsym->st_name;
- else
- name = f->sections[extsym->st_shndx]->name;
- intsym = (struct s390_symbol *)obj_find_symbol(&ifile->root, name);
-
- if (!intsym->gotent.offset_done)
- {
- intsym->gotent.offset_done = 1;
- intsym->gotent.offset = offset;
- offset += 4;
- }
- }
- }
-
- if (offset > 0 || gotneeded)
- ifile->got = obj_create_alloced_section(&ifile->root, ".got", 4, offset);
-
- return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *m)
-{
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_sparc.c b/mdk-stage1/insmod-modutils/obj/obj_sparc.c
deleted file mode 100644
index 1a03c9090..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_sparc.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* Sparc specific support for Elf loading and relocation.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- return xmalloc(sizeof(struct obj_file));
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- return xmalloc(sizeof(struct obj_symbol));
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- /* Assume it's just a debugging section that we can safely
- ignore ... */
- sec->contents = NULL;
-
- return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf32_Rela *rel,
- Elf32_Addr v)
-{
- Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
- Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (ELF32_R_TYPE(rel->r_info))
- {
- case R_SPARC_NONE:
- break;
- case R_SPARC_8:
- if (v > 0xff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0xff) | (v & 0xff);
- break;
- case R_SPARC_16:
- if (v > 0xffff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0xffff) | (v & 0xffff);
- break;
- case R_SPARC_32:
- *loc = v;
- break;
- case R_SPARC_DISP8:
- v -= dot;
- if (v > 0xff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0xff) | (v & 0xff);
- break;
- case R_SPARC_DISP16:
- v -= dot;
- if (v > 0xffff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0xffff) | (v & 0xffff);
- break;
- case R_SPARC_DISP32:
- v -= dot;
- *loc = v;
- break;
- case R_SPARC_WDISP30:
- v -= dot;
- if (v % 4)
- ret = obj_reloc_dangerous;
- *loc = (*loc & ~0x3fffffff) | (v >> 2);
- break;
- case R_SPARC_WDISP22:
- v -= dot;
- if (v % 4)
- ret = obj_reloc_dangerous;
- *loc = (*loc & ~0x3fffff) | ((v >> 2) & 0x3fffff);
- break;
- case R_SPARC_HI22:
- *loc = (*loc & ~0x3fffff) | (v >> 10);
- break;
- case R_SPARC_22:
- if (v > 0x3fffff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x3fffff) | (v & 0x3fffff);
- break;
- case R_SPARC_13:
- if (v > 0x1fff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x1fff) | (v & 0x1fff);
- break;
- case R_SPARC_LO10:
- *loc = (*loc & ~0x3ff) | (v & 0x3ff);
- break;
-
- case R_SPARC_PC10:
- v -= dot;
- *loc = (*loc & ~0x3ff) | (v & 0x3ff);
- break;
- case R_SPARC_PC22:
- v -= dot;
- *loc = (*loc & ~0x3fffff) | (v >> 10);
- break;
-
- case R_SPARC_UA32:
- *(((char *)loc) + 0) = (char)(v >> 24);
- *(((char *)loc) + 1) = (char)(v >> 16);
- *(((char *)loc) + 2) = (char)(v >> 8);
- *(((char *)loc) + 3) = (char)v;
- break;
-
-#ifdef R_SPARC_10
- case R_SPARC_10:
- if (v > 0x3ff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x3ff) | (v & 0x3ff);
- break;
- case R_SPARC_11:
- if (v > 0x7ff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x7ff) | (v & 0x7ff);
- break;
- case R_SPARC_WDISP16:
- v -= dot;
- if (v % 4)
- ret = obj_reloc_dangerous;
- *loc = (*loc & ~0x303fff) | ((v << 4) & 0x300000) | ((v >> 2) & 0x3fff);
- break;
- case R_SPARC_WDISP19:
- v -= dot;
- if (v % 4)
- ret = obj_reloc_dangerous;
- *loc = (*loc & ~0x7ffff) | ((v >> 2) & 0x7ffff);
- break;
- case R_SPARC_7:
- if (v > 0x7f)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x7f) | (v & 0x7f);
- break;
- case R_SPARC_5:
- if (v > 0x1f)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x1f) | (v & 0x1f);
- break;
- case R_SPARC_6:
- if (v > 0x3f)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x3f) | (v & 0x3f);
- break;
-#endif /* R_SPARC_10 */
-
- default:
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int
-arch_create_got (struct obj_file *ef)
-{
- return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_sparc64.c b/mdk-stage1/insmod-modutils/obj/obj_sparc64.c
deleted file mode 100644
index 84e8d18a0..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_sparc64.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/* Sparc64 specific support for Elf loading and relocation.
- Copyright 1997 Linux International.
-
- Contributed by Jakub Jelinek <jj@sunsite.mff.cuni.cz>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
- return xmalloc(sizeof(struct obj_file));
-}
-
-struct obj_section *
-arch_new_section (void)
-{
- return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
- return xmalloc(sizeof(struct obj_symbol));
-}
-
-#ifdef BROKEN_SPARC64_RELOCS
-
-#undef R_SPARC_PLT32
-#undef R_SPARC_HIPLT22
-#undef R_SPARC_LOPLT10
-#undef R_SPARC_PCPLT32
-#undef R_SPARC_PCPLT22
-#undef R_SPARC_PCPLT10
-#undef R_SPARC_10
-#undef R_SPARC_11
-#undef R_SPARC_64
-#undef R_SPARC_OLO10
-#undef R_SPARC_HH22
-#undef R_SPARC_HM10
-#undef R_SPARC_LM22
-#undef R_SPARC_PC_HH22
-#undef R_SPARC_PC_HM10
-#undef R_SPARC_PC_LM22
-#undef R_SPARC_WDISP16
-#undef R_SPARC_WDISP19
-#undef R_SPARC_GLOB_JMP
-#undef R_SPARC_7
-#undef R_SPARC_5
-#undef R_SPARC_6
-
-#define R_SPARC_10 24
-#define R_SPARC_11 25
-#define R_SPARC_64 26
-#define R_SPARC_OLO10 27
-#define R_SPARC_HH22 28
-#define R_SPARC_HM10 29
-#define R_SPARC_LM22 30
-#define R_SPARC_PC_HH22 31
-#define R_SPARC_PC_HM10 32
-#define R_SPARC_PC_LM22 33
-#define R_SPARC_WDISP16 34
-#define R_SPARC_WDISP19 35
-#define R_SPARC_GLOB_JMP 36
-#define R_SPARC_7 37
-#define R_SPARC_5 38
-#define R_SPARC_6 39
-
-#else
-
-#ifndef R_SPARC_64
-
-#define R_SPARC_64 32
-#define R_SPARC_OLO10 33
-#define R_SPARC_HH22 34
-#define R_SPARC_HM10 35
-#define R_SPARC_LM22 36
-#define R_SPARC_PC_HH22 37
-#define R_SPARC_PC_HM10 38
-#define R_SPARC_PC_LM22 39
-
-#endif
-
-#endif
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
- /* Assume it's just a debugging section that we can safely
- ignore ... */
- sec->contents = NULL;
-
- return 0;
-}
-
-#define ELF64_R_TYPE_ID(info) ((info) & 0xff)
-#define ELF64_R_TYPE_DATA(info) ((info) >> 8)
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
- struct obj_section *targsec,
- struct obj_section *symsec,
- struct obj_symbol *sym,
- Elf64_Rela *rel,
- Elf64_Addr v)
-{
- unsigned int *loc = (unsigned int *)(targsec->contents + rel->r_offset);
- unsigned int dot = targsec->header.sh_addr + rel->r_offset;
-
- enum obj_reloc ret = obj_reloc_ok;
-
- switch (ELF64_R_TYPE_ID(rel->r_info))
- {
- case R_SPARC_NONE:
- break;
-
- case R_SPARC_64:
- case R_SPARC_UA64:
- if (! ((long) loc & 3)) {
- /* Common in .eh_frame */
- ((unsigned int *) loc) [0] = v >> 32;
- ((unsigned int *) loc) [1] = v;
- break;
- }
- ((unsigned char *) loc) [0] = v >> 56;
- ((unsigned char *) loc) [1] = v >> 48;
- ((unsigned char *) loc) [2] = v >> 40;
- ((unsigned char *) loc) [3] = v >> 32;
- ((unsigned char *) loc) [4] = v >> 24;
- ((unsigned char *) loc) [5] = v >> 16;
- ((unsigned char *) loc) [6] = v >> 8;
- ((unsigned char *) loc) [7] = v;
- break;
- case R_SPARC_32:
- case R_SPARC_UA32:
- if (! ((long) loc & 3)) {
- *loc = v;
- break;
- }
- ((unsigned char *) loc) [0] = v >> 24;
- ((unsigned char *) loc) [1] = v >> 16;
- ((unsigned char *) loc) [2] = v >> 8;
- ((unsigned char *) loc) [3] = v;
- break;
- case R_SPARC_16:
- if (v > 0xffff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0xffff) | (v & 0xffff);
- break;
- case R_SPARC_8:
- if (v > 0xff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0xff) | (v & 0xff);
- break;
-
- case R_SPARC_DISP32:
- v -= dot;
- *loc = v;
- break;
- case R_SPARC_DISP16:
- v -= dot;
- if (v > 0xffff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0xffff) | (v & 0xffff);
- break;
- case R_SPARC_DISP8:
- v -= dot;
- if (v > 0xff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0xff) | (v & 0xff);
- break;
- case R_SPARC_WDISP30:
- v -= dot;
- if (v % 4)
- ret = obj_reloc_dangerous;
- *loc = (*loc & ~0x3fffffff) | ((v >> 2) & 0x3fffffff);
- break;
-
- /* MEDLOW code model relocs */
- case R_SPARC_LO10:
- *loc = (*loc & ~0x3ff) | (v & 0x3ff);
- break;
- case R_SPARC_HI22:
- *loc = (*loc & ~0x3fffff) | (v >> 10);
- break;
- case R_SPARC_OLO10:
- *loc = (*loc & ~0x1fff) | (((v & 0x3ff) + ELF64_R_TYPE_DATA (rel->r_info)) & 0x1fff);
- break;
-
- /* MEDMID code model relocs */
- case R_SPARC_H44:
- *loc = (*loc & ~0x3fffff) | (v >> 22);
- break;
- case R_SPARC_M44:
- *loc = (*loc & ~0x3ff) | ((v >> 12) & 0x3ff);
- break;
- case R_SPARC_L44:
- *loc = (*loc & ~0xfff) | (v & 0xfff);
- break;
-
- /* MEDANY code model relocs */
- case R_SPARC_HH22:
- *loc = (*loc & ~0x3fffff) | (v >> 42);
- break;
- case R_SPARC_HM10:
- *loc = (*loc & ~0x3ff) | ((v >> 32) & 0x3ff);
- break;
- case R_SPARC_LM22:
- *loc = (*loc & ~0x3fffff) | ((v >> 10) & 0x3fffff);
- break;
-
- case R_SPARC_WDISP22:
- v -= dot;
- if (v % 4)
- ret = obj_reloc_dangerous;
- *loc = (*loc & ~0x3fffff) | ((v >> 2) & 0x3fffff);
- break;
- case R_SPARC_22:
- if (v > 0x3fffff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x3fffff) | (v & 0x3fffff);
- break;
- case R_SPARC_13:
- if (v > 0x1fff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x1fff) | (v & 0x1fff);
- break;
-
- case R_SPARC_PC10:
- v -= dot;
- *loc = (*loc & ~0x3ff) | (v & 0x3ff);
- break;
- case R_SPARC_PC22:
- v -= dot;
- *loc = (*loc & ~0x3fffff) | ((v >> 10) & 0x3fffff);
- break;
-
-#ifdef R_SPARC_10
- case R_SPARC_10:
- if (v > 0x3ff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x3ff) | (v & 0x3ff);
- break;
- case R_SPARC_11:
- if (v > 0x7ff)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x7ff) | (v & 0x7ff);
- break;
-
-#ifdef R_SPARC_64
- case R_SPARC_PC_HH22:
- v -= dot;
- *loc = (*loc & ~0x3fffff) | (v >> 42);
- break;
- case R_SPARC_PC_HM10:
- v -= dot;
- *loc = (*loc & ~0x3ff) | ((v >> 32) & 0x3ff);
- break;
- case R_SPARC_PC_LM22:
- v -= dot;
- *loc = (*loc & ~0x3fffff) | ((v >> 10) & 0x3fffff);
- break;
-#endif
-
- case R_SPARC_WDISP16:
- v -= dot;
- if (v % 4)
- ret = obj_reloc_dangerous;
- *loc = (*loc & ~0x303fff) | ((v << 4) & 0x300000) | ((v >> 2) & 0x3fff);
- break;
- case R_SPARC_WDISP19:
- v -= dot;
- if (v % 4)
- ret = obj_reloc_dangerous;
- *loc = (*loc & ~0x7ffff) | ((v >> 2) & 0x7ffff);
- break;
- case R_SPARC_7:
- if (v > 0x7f)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x7f) | (v & 0x7f);
- break;
- case R_SPARC_5:
- if (v > 0x1f)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x1f) | (v & 0x1f);
- break;
- case R_SPARC_6:
- if (v > 0x3f)
- ret = obj_reloc_overflow;
- *loc = (*loc & ~0x3f) | (v & 0x3f);
- break;
-#endif /* R_SPARC_10 */
-
- default:
- ret = obj_reloc_unhandled;
- break;
- }
-
- return ret;
-}
-
-int
-arch_create_got (struct obj_file *ef)
-{
- return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
- return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
- int i, n = f->header.e_shnum;
-
- f->baseaddr = base;
- for (i = 0; i < n; ++i)
- f->sections[i]->header.sh_addr += base;
- return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/util/Makefile b/mdk-stage1/insmod-modutils/util/Makefile
deleted file mode 100644
index 763f046f2..000000000
--- a/mdk-stage1/insmod-modutils/util/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
- #******************************************************************************
- #
- # insmod from modutils (generic)
- #
- # $Id$
- #
- # Copyright 1996, 1997 Linux International.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-all: libutil.a libutil-STANDALONE.a #libutil-DIET.a
-
-clean:
- rm -f *.o *.a
-
-
-INCS = -I./../include
-
-DEFS = -Wno-error -D_GNU_SOURCE -DELF_MACHINE_H='"elf_$(ARCH).h"' -DARCH_$(ARCH) -DHAVE_WORDEXP=1 -DHAVE_GLOB=1 -DCONFIG_ROOT_CHECK_OFF=0
-
-
-OBJS = xmalloc.o xrealloc.o xstrcat.o xstrdup.o xsystem.o xftw.o \
- modstat.o meta_expand.o config.o snap_shot.o arch64.o gzfiles.o sys_nim.o sys_oim.o
-
-libutil.a: $(OBJS) logger.o
- ar cru $@ $^
- ranlib $@
-
-libutil-STANDALONE.a: $(OBJS) logger-standalone.o
- ar cru $@ $^
- ranlib $@
-
-logger-standalone.o: logger.c
- gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -o $@ -D_STANDALONE_ -c logger.c
-
-.c.o:
- gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $<
diff --git a/mdk-stage1/insmod-modutils/util/alias.h b/mdk-stage1/insmod-modutils/util/alias.h
deleted file mode 100644
index c925a04f3..000000000
--- a/mdk-stage1/insmod-modutils/util/alias.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * This file is split out from config.c for easier editing
- */
-
-/*
- * tbpath and tbtype are used to build the complete set of paths for finding
- * modules, but only when we search for individual directories, they are not
- * used for [boot] and [toplevel] searches.
- */
-static char *tbpath[] =
-{
- "/lib/modules",
- NULL /* marks the end of the list! */
-};
-
-char *tbtype[] =
-{
- "kernel", /* as of 2.3.14 this must be first */
- "fs",
- "net",
- "scsi",
- "block",
- "cdrom",
- "ipv4",
- "ipv6",
- "sound",
- "fc4",
- "video",
- "misc",
- "pcmcia",
- "atm",
- "usb",
- "ide",
- "ieee1394",
- "mtd",
- NULL /* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined aliases.
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *aliaslist[] =
-{
- "binfmt-204 binfmt_aout",
- "binfmt-263 binfmt_aout",
- "binfmt-264 binfmt_aout",
- "binfmt-267 binfmt_aout",
- "binfmt-387 binfmt_aout",
- "binfmt-332 iBCS",
- "binfmt--310 binfmt_java",
-
- "block-major-1 rd",
- "block-major-2 floppy",
- "block-major-3 ide-probe-mod",
- "block-major-7 loop",
- "block-major-8 sd_mod",
- "block-major-9 md", /* For modular RAID */
- "block-major-11 sr_mod",
- "block-major-13 xd",
- "block-major-15 cdu31a",
- "block-major-16 gscd",
- "block-major-17 optcd",
- "block-major-18 sjcd",
- "block-major-20 mcdx",
- "block-major-22 ide-probe-mod",
- "block-major-23 mcd",
- "block-major-24 sonycd535",
- "block-major-25 sbpcd",
- "block-major-26 sbpcd",
- "block-major-27 sbpcd",
- "block-major-29 aztcd",
- "block-major-32 cm206",
- "block-major-33 ide-probe-mod",
- "block-major-34 ide-probe-mod",
- "block-major-37 ide-tape",
- "block-major-44 ftl", /* from David Woodhouse <dwmw2@infradead.org> */
- "block-major-56 ide-probe-mod",
- "block-major-57 ide-probe-mod",
- "block-major-88 ide-probe-mod",
- "block-major-89 ide-probe-mod",
- "block-major-90 ide-probe-mod",
- "block-major-91 ide-probe-mod",
- "block-major-93 nftl", /* from David Woodhouse <dwmw2@infradead.org> */
-
- "char-major-4 serial",
- "char-major-5 serial",
- "char-major-6 lp",
- "char-major-9 st",
- "char-major-10 off", /* was: mouse, was: misc */
- "char-major-10-0 busmouse", /* /dev/logibm Logitech bus mouse */
- "char-major-10-1 off", /* /dev/psaux PS/2-style mouse port */
- "char-major-10-2 msbusmouse", /* /dev/inportbm Microsoft Inport bus mouse */
- "char-major-10-3 atixlmouse", /* /dev/atibm ATI XL bus mouse */
- /* /dev/jbm J-mouse */
- /* /dev/amigamouse Amiga mouse (68k/Amiga) */
- /* /dev/atarimouse Atari mouse */
- /* /dev/sunmouse Sun mouse */
- /* /dev/beep Fancy beep device */
- /* /dev/modreq Kernel module load request */
- "char-major-10-130 wdt", /* /dev/watchdog Watchdog timer port */
- "char-major-10-131 wdt", /* /dev/temperature Machine internal temperature */
- /* /dev/hwtrap Hardware fault trap */
- /* /dev/exttrp External device trap */
- "char-major-10-135 off", /* rtc cannot be compiled as a module */
- "char-major-10-139 openprom", /* /dev/openprom Linux/Sparc interface */
- "char-major-10-144 nvram", /* from Tigran Aivazian <tigran@sco.COM> */
- "char-major-10-157 applicom", /* from David Woodhouse <dwmw2@infradead.org> */
- "char-major-10-175 agpgart", /* /dev/agpgart GART AGP mapping access */
- "char-major-10-184 microcode", /* Tigran Aivazian <tigran@veritas.com> */
-
- "char-major-14 soundcore",
- "char-major-19 cyclades",
- "char-major-20 cyclades",
- "char-major-21 sg",
- "char-major-22 pcxx", /* ?? */
- "char-major-23 pcxx", /* ?? */
- "char-major-27 ftape",
- "char-major-34 scc",
- "char-major-35 tclmidi",
- "char-major-36 netlink",
- "char-major-37 ide-tape",
- "char-major-48 riscom8",
- "char-major-49 riscom8",
- "char-major-57 esp",
- "char-major-58 esp",
- "char-major-63 kdebug",
- "char-major-90 mtdchar", /* from David Woodhouse <dwmw2@infradead.org> */
- "char-major-99 ppdev",
- "char-major-107 3dfx", /* from Tigran Aivazian <tigran@sco.COM> */
- "char-major-161 ircomm-tty",
-
- "dos msdos",
- "dummy0 dummy",
- "dummy1 dummy",
- "eth0 off",
- "iso9660 isofs",
- "md-personality-1 linear",
- "md-personality-2 raid0",
- "md-personality-3 raid1",
- "md-personality-4 raid5",
-
- "net-pf-1 unix", /* PF_UNIX 1 Unix domain sockets */
- "net-pf-2 ipv4", /* PF_INET 2 Internet IP Protocol */
- "net-pf-3 off", /* PF_AX25 3 Amateur Radio AX.25 */
- "net-pf-4 ipx", /* PF_IPX 4 Novell IPX */
- "net-pf-5 appletalk", /* PF_APPLETALK 5 Appletalk DDP */
- "net-pf-6 off", /* PF_NETROM 6 Amateur radio NetROM */
- /* PF_BRIDGE 7 Multiprotocol bridge */
- /* PF_AAL5 8 Reserved for Werner's ATM */
- /* PF_X25 9 Reserved for X.25 project */
- /* PF_INET6 10 IP version 6 */
-
- /* next two from <dairiki@matthews.dairiki.org> Thanks! */
- "net-pf-17 af_packet",
- "net-pf-19 off", /* acorn econet */
-
- "netalias-2 ip_alias",
- "plip0 plip",
- "plip1 plip",
- "cipcb0 cipcb",
- "cipcb1 cipcb",
- "cipcb2 cipcb",
- "cipcb3 cipcb",
- "ppp0 ppp",
- "ppp1 ppp",
- "scsi_hostadapter off", /* if not in config file */
- "slip0 slip",
- "slip1 slip",
- "tty-ldisc-1 slip",
- "tty-ldisc-3 ppp",
- "ppp-compress-21 bsd_comp",
- "ppp-compress-24 ppp_deflate",
- "ppp-compress-26 ppp_deflate",
-
-#ifndef __sparc__
- "parport_lowlevel parport_pc",
-#else
- "parport_lowlevel parport_ax",
-#endif
-
- "tty-ldisc-11 irtty",
-
- "usbdevfs usbcore",
-
- NULL /* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined options.
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *optlist[] =
-{
- "dummy0 -o dummy0",
- "dummy1 -o dummy1",
- "sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330",
- NULL /* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined "above"s,
- * used for pull-in of additional modules
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *above[] =
-{
- NULL /* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined "below"s,
- * used for push-in of additional modules
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *below[] =
-{
- NULL /* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined "prune"s,
- * used to exclude paths from scan of /lib/modules.
- * /etc/modules.conf can add entries but not remove them.
- */
-char *prune[] =
-{
- ".rhkmvtag",
- "modules.dep",
- "modules.generic_string",
- "modules.pcimap",
- "modules.isapnpmap",
- "modules.usbmap",
- "modules.parportmap",
- "System.map",
- ".config",
- "build", /* symlink to source tree */
- "vmlinux",
- "vmlinuz",
- "bzImage",
- "zImage",
- ".rhkmvtag", /* wish RedHat had told me before they did this */
- NULL /* marks the end of the list! */
-};
diff --git a/mdk-stage1/insmod-modutils/util/arch64.c b/mdk-stage1/insmod-modutils/util/arch64.c
deleted file mode 100644
index 4d5ace223..000000000
--- a/mdk-stage1/insmod-modutils/util/arch64.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Misc utility functions.
- Copyright 1996, 1997 Linux International.
- Written by Keith Owens <kaos@ocs.com.au>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <string.h>
-#include <sys/utsname.h>
-#include "util.h"
-
-/*======================================================================*/
-
-/* Indicate if the current machine uses 64 bit architecture */
-int arch64(void)
-{
- struct utsname u;
- return(!uname(&u) && strstr(u.machine, "64"));
-}
diff --git a/mdk-stage1/insmod-modutils/util/config.c b/mdk-stage1/insmod-modutils/util/config.c
deleted file mode 100644
index a860920f6..000000000
--- a/mdk-stage1/insmod-modutils/util/config.c
+++ /dev/null
@@ -1,1591 +0,0 @@
-/*
- * Handle the configuration, including /etc/modules.conf
- *
- * Copyright 1994, 1995, 1996, 1997:
- * Jacques Gelinas <jack@solucorp.qc.ca>
- * Björn Ekwall <bj0rn@blox.se> February 1999
- * Keith Owens <kaos@ocs.com.au> October 1999
- *
- * "kernelversion" idea from the Debian release via:
- * Wichert Akkerman <wakkerma@cs.leidenuniv.nl>
- *
- * Björn, inspired by Richard Henderson <rth@twiddle.net>, cleaned up
- * the wildcard handling and started using ftw in March 1999
- * Cleanup of hardcoded arrays: Björn Ekwall <bj0rn@blox.se> March 1999
- * Many additional keywords: Björn Ekwall <bj0rn@blox.se> (C) March 1999
- * Standardize on /etc/modules.conf Keith Owens <kaos@ocs.com.au> October 1999
- *
- * Alpha typecast:Michal Jaegermann <michal@ellpspace.math.ualberta.ca>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- * Specification: /etc/modules.conf / format
- * Modules may be located at different places in the filesystem.
- *
- * The file /etc/modules.conf contains different definitions to
- * control the manipulation of modules.
- *
- * Standard Unix style comments and continuation line are supported.
- * Comments begin with a # and continue until the end of the line.
- * A line continues on the next one if the last non-white character
- * is a \.
- */
-/* #Specification: /etc/modules.conf / format / official name */
-
-#include <stdio.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <limits.h>
-#include <sys/param.h>
-#include <errno.h>
-
-#include "util.h"
-#include "config.h"
-#include "alias.h"
-
-int flag_autoclean; /* set/used by modprobe and insmod */
-
-struct utsname uts_info;
-
-struct PATH_TYPE *modpath;
-int nmodpath = 0;
-static int maxpath = 0;
-
-struct EXEC_TYPE *execs;
-int nexecs = 0;
-static int maxexecs = 0;
-
-OPT_LIST *opt_list;
-static int n_opt_list;
-
-OPT_LIST *abovelist;
-static int n_abovelist;
-
-OPT_LIST *belowlist;
-static int n_belowlist;
-
-OPT_LIST *prunelist;
-static int n_prunelist;
-
-OPT_LIST *probe_list;
-static int n_probe_list;
-
-OPT_LIST *probeall_list;
-static int n_probeall_list;
-
-OPT_LIST *aliases;
-static int n_aliases;
-
-char *persistdir = "/var/lib/modules/persist";
-
-const char symprefix[] = SYMPREFIX;
-
-char *insmod_opt = NULL;
-char *config_file = NULL; /* Which file was actually used */
-time_t config_mtime;
-int root_check_off = CONFIG_ROOT_CHECK_OFF; /* Default is modules must be owned by root */
-static char *config_version; /* Hack for config_add */
-int quick = 0; /* Option -A */
-
-/* The initialization order must match the gen_file_enum order in config.h */
-struct gen_files gen_file[] = {
- {"generic_string", NULL, 0},
- {"pcimap", NULL, 0},
- {"isapnpmap", NULL, 0},
- {"usbmap", NULL, 0},
- {"parportmap", NULL, 0},
- {"dep", NULL, 0},
-};
-
-const int gen_file_count = sizeof(gen_file)/sizeof(gen_file[0]);
-
-int flag_verbose;
-
-unsigned long safemode;
-
-void verbose(const char *ctl,...)
-{
- if (flag_verbose) {
- va_list list;
- va_start(list, ctl);
- vprintf(ctl, list);
- va_end(list);
- fflush(stdout);
- }
-}
-
-
-/*
- * Check to see if the existing modules.xxx files need updating,
- * based on the timestamps of the modules and the config file.
- */
-static int check_update (const char *file, const struct stat *sb)
-{
- int len = strlen(file);
- int i;
-
- if (!S_ISREG(sb->st_mode))
- return 0;
- for (i = 0; i < gen_file_count; ++i) {
- if (sb->st_mtime > gen_file[i].mtime)
- break;
- }
- if (i == gen_file_count)
- return 0; /* All generated files are up to date */
-
- if (len > 2 && !strcmp(file + len - 2, ".o"))
- return 1;
- else if (len > 4 && !strcmp(file + len - 4, ".mod"))
- return 1;
-#ifdef CONFIG_USE_ZLIB
- else if (len > 5 && !strcmp(file + len - 5, ".o.gz"))
- return 1;
-#endif
- return 0;
-}
-
-static int need_update (const char *force_ver, const char *base_dir)
-{
- struct stat tmp;
- char dep[PATH_MAX];
- int i;
- uname (&uts_info);
- if (!force_ver)
- force_ver = uts_info.release;
-
- if (strlen (force_ver) > 50)
- /* That's just silly. */
- return 1;
-
- for (i = 0; i < gen_file_count; ++i) {
- if (stat(gen_file[i].name, &tmp))
- return 1; /* No dependency file yet, so we need to build it. */
- gen_file[i].mtime = tmp.st_mtime;
- }
-
- if (stat ("/etc/modules.conf", &tmp) &&
- stat ("/etc/conf.modules", &tmp))
- return 1;
-
- for (i = 0; i < gen_file_count; ++i) {
- if (tmp.st_mtime > gen_file[i].mtime)
- return 1; /* Config file is newer. */
- }
-
- snprintf (dep, sizeof(dep), "%s/lib/modules/%s", base_dir, force_ver);
- return xftw (dep, check_update);
-}
-
-
-/*
- * Strip white char at the end of a string.
- * Return the address of the last non white char + 1 (point on the '\0').
- */
-static char *strip_end(char *str)
-{
- int len = strlen(str);
-
- for (str += len - 1; len > 0 && (isspace(*str)); --len, --str)
- *str = '\0';
- return str + 1;
-}
-
-/*
- * Read a line of a configuration file and process continuation lines.
- * Return buf, or NULL if EOF.
- * Blank at the end of line are always stripped.
- * Everything on a line following comchar is a comment.
- *
- * Continuation character is \
- * Comment character is #
- */
-char *fgets_strip(char *buf, int sizebuf, FILE * fin, int *lineno)
-{
- int nocomment = 1; /* No comments found ? */
- int contline = 0;
- char *start = buf;
- char *ret = NULL;
- char comchar = '#';
- char contchar = '\\';
-
- *buf = '\0';
-
- while (fgets(buf, sizebuf, fin) != NULL) {
- char *end = strip_end(buf);
- char *pt = strchr(buf, comchar);
-
- if (pt != NULL) {
- nocomment = 0;
- *pt = '\0';
- end = strip_end(buf);
- }
-
- if (lineno != NULL)
- (*lineno)++;
- ret = start;
- if (contline) {
- char *pt = buf;
-
- while (isspace(*pt))
- pt++;
- if (pt > buf + 1) {
- strcpy(buf + 1, pt); /* safe, backward copy */
- buf[0] = ' ';
- end -= (int) (pt - buf) - 1;
- } else if (pt == buf + 1) {
- buf[0] = ' ';
- }
- }
- if (end > buf && *(end - 1) == contchar) {
- if (end == buf + 1 || *(end - 2) != contchar) {
- /* Continuation */
- contline = 1;
- end--;
- *end = '\0';
- buf = end;
- } else {
- *(end - 1) = '\0';
- break;
- }
- } else {
- break;
- }
- }
-
- return ret;
-}
-
-static char *next_word(char *pt)
-{
- char *match;
- char *pt2;
-
- /* find end of word */
- for (pt2 = pt; *pt2 && !(isspace(*pt2)); ++pt2) {
- if ((match = strchr("\"'`", *pt2)) != NULL) {
- for (++pt2; *pt2 && *pt2 != *match; ++pt2) {
- if (*pt2 == '\\' && *(pt2 + 1) == *match)
- ++pt2;
- }
- }
- }
-
- /* skip leading whitespace before next word */
- if (*pt2) {
- *pt2++ = '\0'; /* terminate last word */
- while (*pt2 && isspace(*pt2))
- ++pt2;
- }
- return pt2;
-}
-
-static GLOB_LIST *addlist(GLOB_LIST *orig, GLOB_LIST *add)
-{
- if (!orig)
- return add;
- /* else */
- orig->pathv = (char **)xrealloc(orig->pathv,
- (orig->pathc + add->pathc + 1) *
- sizeof(char *));
- memcpy(orig->pathv + orig->pathc, add->pathv,
- add->pathc * sizeof(char *));
- orig->pathc += add->pathc;
- orig->pathv[orig->pathc] = NULL;
- /*
- free(add->pathv);
- free(add);
- */
- return orig;
-}
-
-static void decode_list(int *n, OPT_LIST **list, char *arg, int adding,
- char *version, int opts)
-{
- GLOB_LIST *pg;
- GLOB_LIST *prevlist = NULL;
- int i, autoclean = 1;
- int where = *n;
- char *arg2 = next_word(arg);
-
- if (opts && !strcmp (arg, "-k")) {
- if (!*arg2)
- error("Missing module argument after -k\n");
- arg = arg2;
- arg2 = next_word(arg);
- autoclean = 0;
- }
-
- for (i = 0; i < *n; ++i) {
- if (strcmp((*list)[i].name, arg) == 0) {
- if (adding)
- prevlist = (*list)[i].opts;
- else
- free((*list)[i].opts);
- (*list)[i].opts = NULL;
- where = i;
- break;
- }
- }
- if (where == *n) {
- (*list) = (OPT_LIST *)xrealloc((*list),
- (*n + 2) * sizeof(OPT_LIST));
- (*list)[*n].name = xstrdup(arg);
- (*list)[*n].autoclean = autoclean;
- *n += 1;
- memset(&(*list)[*n], 0, sizeof(OPT_LIST));
- } else if (!autoclean)
- (*list)[where].autoclean = 0;
- pg = (GLOB_LIST *)xmalloc(sizeof(GLOB_LIST));
- meta_expand(arg2, pg, NULL, version, ME_ALL);
- (*list)[where].opts = addlist(prevlist, pg);
-}
-
-static void decode_exec(char *arg, int type)
-{
- char *arg2;
-
- execs[nexecs].when = type;
- arg2 = next_word(arg);
- execs[nexecs].module = xstrdup(arg);
- execs[nexecs].cmd = xstrdup(arg2);
- if (++nexecs >= maxexecs) {
- maxexecs += 10;
- execs = (struct EXEC_TYPE *)xrealloc(execs,
- maxexecs * sizeof(struct EXEC_TYPE));
- }
-}
-
-static int build_list(char **in, OPT_LIST **out, char *version, int opts)
-{
- GLOB_LIST *pg;
- int i;
-
- for (i = 0; in[i]; ++i) {
- char *p = xstrdup(in[i]);
- char *pt = next_word(p);
- char *pn = p;
-
- *out = (OPT_LIST *)xrealloc(*out, (i + 2) * sizeof(OPT_LIST));
- (*out)[i].autoclean = 1;
- if (opts && !strcmp (p, "-k")) {
- pn = pt;
- pt = next_word(pn);
- (*out)[i].autoclean = 0;
- }
- pg = (GLOB_LIST *)xmalloc(sizeof(GLOB_LIST));
- meta_expand(pt, pg, NULL, version, ME_ALL);
- (*out)[i].name = xstrdup(pn);
- (*out)[i].opts = pg;
- free(p);
- }
- memset(&(*out)[i], 0, sizeof(OPT_LIST));
-
- return i;
-}
-
-/* Environment variables can override defaults, testing only */
-static void gen_file_env(struct gen_files *gf)
-{
- if (!safemode) {
- char *e = xmalloc(strlen(gf->base)+5), *p1 = gf->base, *p2 = e;
- while ((*p2++ = toupper(*p1++))) ;
- strcpy(p2-1, "PATH"); /* safe, xmalloc */
- if ((p2 = getenv(e)) != NULL) {
- free(gf->name);
- gf->name = xstrdup(p2);
- }
- free(e);
- }
-}
-
-/* Read a config option for a generated filename */
-static int gen_file_conf(struct gen_files *gf, int assgn, const char *parm, const char *arg)
-{
-
- int l = strlen(gf->base);
- if (assgn &&
- strncmp(parm, gf->base, l) == 0 &&
- strcmp(parm+l, "file") == 0 &&
- !gf->name) {
- gf->name = xstrdup(arg);
- return(0);
- }
- return(1);
-}
-
-/* Check we have a name for a generated file */
-static int gen_file_check(struct gen_files *gf, GLOB_LIST *g,
- char *base_dir, char *version)
-{
- char tmp[PATH_MAX];
- int ret = 0;
- if (!gf->name) {
- /*
- * Specification: config file / no xxxfile parameter
- * The default value for generated filename xxx is:
- *
- * xxxfile=/lib/modules/`uname -r`/modules.xxx
- *
- * If the config file exists but lacks an xxxfile
- * specification, the default value is used since
- * the system can't work without one.
- */
- snprintf(tmp, sizeof(tmp), "%s/lib/modules/%s/modules.%s",
- base_dir, version, gf->base);
- gf->name = xstrdup(tmp);
- } else { /* xxxfile defined in modules.conf */
- /*
- * If we have a xxxfile definition in the configuration file
- * we must resolve any shell meta-chars in its value.
- */
- if (meta_expand(gf->name, g, base_dir, version, ME_ALL))
- ret = -1;
- else if (!g->pathv || g->pathv[0] == NULL)
- ret = -1;
- else {
- free(gf->name);
- gf->name = xstrdup(g->pathv[0]);
- }
- }
- return(ret);
-}
-
-/*
- * Read the configuration file.
- * If parameter "all" == 0 then ignore everything except path info
- * Return -1 if any error.
- * Error messages generated.
- */
-static int do_read(int all, char *force_ver, char *base_dir, char *conf_file, int depth)
-{
- #define MAX_LEVEL 20
- FILE *fin;
- GLOB_LIST g;
- int i;
- int assgn;
- int drop_default_paths = 1;
- int lineno = 0;
- int ret = 0;
- int state[MAX_LEVEL + 1]; /* nested "if" */
- int level = 0;
- char buf[3000];
- char tmpline[100];
- char **pathp;
- char *envpath;
- char *version;
- char *type;
- char **glb;
- char old_name[] = "/etc/conf.modules";
- int conf_file_specified = 0;
-
- /*
- * The configuration file is optional.
- * No error is printed if it is missing.
- * If it is missing the following content is assumed.
- *
- * path[boot]=/lib/modules/boot
- *
- * path[toplevel]=/lib/modules/`uname -r`
- *
- * path[toplevel]=/lib/modules/`kernelversion`
- * (where kernelversion gives the major kernel version: "2.0", "2.2"...)
- *
- * path[toplevel]=/lib/modules/default
- *
- * path[kernel]=/lib/modules/kernel
- * path[fs]=/lib/modules/fs
- * path[net]=/lib/modules/net
- * path[scsi]=/lib/modules/scsi
- * path[block]=/lib/modules/block
- * path[cdrom]=/lib/modules/cdrom
- * path[ipv4]=/lib/modules/ipv4
- * path[ipv6]=/lib/modules/ipv6
- * path[sound]=/lib/modules/sound
- * path[fc4]=/lib/modules/fc4
- * path[video]=/lib/modules/video
- * path[misc]=/lib/modules/misc
- * path[pcmcia]=/lib/modules/pcmcia
- * path[atm]=/lib/modules/atm
- * path[usb]=/lib/modules/usb
- * path[ide]=/lib/modules/ide
- * path[ieee1394]=/lib/modules/ieee1394
- * path[mtd]=/lib/modules/mtd
- *
- * The idea is that modprobe will look first if the
- * modules are compiled for the current release of the kernel.
- * If not found, it will look for modules that fit for the
- * general kernelversion (2.0, 2.2 and so on).
- * If still not found, it will look into the default release.
- * And if still not found, it will look in the other directories.
- *
- * The strategy should be like this:
- * When you install a new linux kernel, the modules should go
- * into a directory related to the release (version) of the kernel.
- * Then you can do a symlink "default" to this directory.
- *
- * Each time you compile a new kernel, the make modules_install
- * will create a new directory, but it won't change thee default.
- *
- * When you get a module unrelated to the kernel distribution
- * you can place it in one of the last three directory types.
- *
- * This is the default strategy. Of course you can overide
- * this in /etc/modules.conf.
- *
- * 2.3.15 added a new file tree walk algorithm which made it possible to
- * point at a top level directory and get the same behaviour as earlier
- * versions of modutils. 2.3.16 takes this one stage further, it
- * removes all the individual directory names from most of the scans,
- * only pointing at the top level directory. The only exception is the
- * last ditch scan, scanning all of /lib/modules would be a bad idea(TM)
- * so the last ditch scan still runs individual directory names under
- * /lib/modules.
- *
- * Additional syntax:
- *
- * [add] above module module1 ...
- * Specify additional modules to pull in on top of a module
- *
- * [add] below module module1 ...
- * Specify additional modules needed to be able to load a module
- *
- * [add] prune filename ...
- *
- * [add] probe name module1 ...
- * When "name" is requested, modprobe tries to install each
- * module in the list until it succeeds.
- *
- * [add] probeall name module1 ...
- * When "name" is requested, modprobe tries to install all
- * modules in the list.
- * If any module is installed, the command has succeeded.
- *
- * [add] options module option_list
- *
- * For all of the above, the optional "add" prefix is used to
- * add to a list instead of replacing the contents.
- *
- * include FILE_TO_INCLUDE
- * This does what you expect. No limitation on include levels.
- *
- * persistdir=persist_directory
- * Name the directory to save persistent data from modules.
- *
- * In the following WORD is a sequence if non-white characters.
- * If ' " or ` is found in the string, all characters up to the
- * matching ' " or ` will also be included, even whitespace.
- * Every WORD will then be expanded w.r.t. meta-characters.
- * If the expanded result gives more than one word, then only
- * the first word of the result will be used.
- *
- *
- * define CODE WORD
- * Do a putenv("CODE=WORD")
- *
- * EXPRESSION below can be:
- * WORD compare_op WORD
- * where compare_op is one of == != < <= >= >
- * The string values of the WORDs are compared
- * or
- * -n WORD compare_op WORD
- * where compare_op is one of == != < <= >= >
- * The numeric values of the WORDs are compared
- * or
- * WORD
- * if the expansion of WORD fails, or if the
- * expansion is "0" (zero), "false" or "" (empty)
- * then the expansion has the value FALSE.
- * Otherwise the expansion has the value TRUE
- * or
- * -f FILENAME
- * Test if the file FILENAME exists
- * or
- * -k
- * Test if "autoclean" (i.e. called from the kernel)
- * or
- * ! EXPRESSION
- * A negated expression is also an expression
- *
- * if EXPRESSION
- * any config line
- * ...
- * elseif EXPRESSION
- * any config line
- * ...
- * else
- * any config line
- * ...
- * endif
- *
- * The else and elseif keywords are optional.
- * "if"-statements nest up to 20 levels.
- */
-
- state[0] = 1;
-
- if (force_ver)
- version = force_ver;
- else
- version = uts_info.release;
-
- config_version = xstrdup(version);
-
- /* Only read the default entries on the first file */
- if (depth == 0) {
- maxpath = 100;
- modpath = (struct PATH_TYPE *)xmalloc(maxpath * sizeof(struct PATH_TYPE));
- nmodpath = 0;
-
- maxexecs = 10;
- execs = (struct EXEC_TYPE *)xmalloc(maxexecs * sizeof(struct EXEC_TYPE));
- nexecs = 0;
-
- /*
- * Build predef options
- */
- if (all && optlist[0])
- n_opt_list = build_list(optlist, &opt_list, version, 1);
-
- /*
- * Build predef above
- */
- if (all && above[0])
- n_abovelist = build_list(above, &abovelist, version, 0);
-
- /*
- * Build predef below
- */
- if (all && below[0])
- n_belowlist = build_list(below, &belowlist, version, 0);
-
- /*
- * Build predef prune list
- */
- if (prune[0])
- n_prunelist = build_list(prune, &prunelist, version, 0);
-
- /*
- * Build predef aliases
- */
- if (all && aliaslist[0])
- n_aliases = build_list(aliaslist, &aliases, version, 0);
-
- /* Order and priority is now: (MODPATH + modules.conf) || (predefs + modules.conf) */
- if ((envpath = getenv("MODPATH")) != NULL && !safemode) {
- size_t len;
- char *p;
- char *path;
-
- /* Make a copy so's we can mung it with strtok. */
- len = strlen(envpath) + 1;
- p = alloca(len);
- memcpy(p, envpath, len);
- path = alloca(PATH_MAX);
-
- for (p = strtok(p, ":"); p != NULL; p = strtok(NULL, ":")) {
- len = snprintf(path, PATH_MAX, p, version);
- modpath[nmodpath].path = xstrdup(path);
- if ((type = strrchr(path, '/')) != NULL)
- type += 1;
- else
- type = "misc";
- modpath[nmodpath].type = xstrdup(type);
- if (++nmodpath >= maxpath) {
- maxpath += 100;
- modpath = (struct PATH_TYPE *)xrealloc(modpath,
- maxpath * sizeof(struct PATH_TYPE));
- }
-
- }
- } else {
- /*
- * Build the default "path[type]" configuration
- */
- int n;
- char *k;
-
- /* The first entry in the path list */
- modpath[nmodpath].type = xstrdup("boot");
- snprintf(tmpline, sizeof(tmpline), "%s/lib/modules/boot", base_dir);
- modpath[nmodpath].path = xstrdup(tmpline);
- ++nmodpath;
-
- /* The second entry in the path list, `uname -r` */
- modpath[nmodpath].type = xstrdup("toplevel");
- snprintf(tmpline, sizeof(tmpline), "%s/lib/modules/%s", base_dir, version);
- modpath[nmodpath].path = xstrdup(tmpline);
- ++nmodpath;
-
- /* The third entry in the path list, `kernelversion` */
- modpath[nmodpath].type = xstrdup("toplevel");
- for (n = 0, k = version; *k; ++k) {
- if (*k == '.' && ++n == 2)
- break;
- }
- snprintf(tmpline, sizeof(tmpline), "%s/lib/modules/%.*s", base_dir,
- (/* typecast for Alpha */ int)(k - version), version);
- modpath[nmodpath].path = xstrdup(tmpline);
- ++nmodpath;
-
- /* The rest of the entries in the path list */
- for (pathp = tbpath; *pathp; ++pathp) {
- char **type;
-
- for (type = tbtype; *type; ++type) {
- char path[PATH_MAX];
-
- snprintf(path, sizeof(path), "%s%s/%s", base_dir, *pathp, *type);
- if (meta_expand(path, &g, NULL, version, ME_ALL))
- return -1;
-
- for (glb = g.pathv; glb && *glb; ++glb) {
- modpath[nmodpath].type = xstrdup(*type);
- modpath[nmodpath].path = *glb;
- if (++nmodpath >= maxpath) {
- maxpath += 100;
- modpath = (struct PATH_TYPE *)xrealloc(modpath,
- maxpath * sizeof(struct PATH_TYPE));
- }
- }
- }
- }
- }
-
- /* Environment overrides for testing only, undocumented */
- for (i = 0; i < gen_file_count; ++i)
- gen_file_env(gen_file+i);
-
- } /* End of depth == 0 */
-
- if (conf_file ||
- ((conf_file = getenv("MODULECONFIG")) != NULL && *conf_file && !safemode)) {
- if (!(fin = fopen(conf_file, "r"))) {
- error("Can't open %s", conf_file);
- return -1;
- }
- conf_file_specified = 1;
- } else {
- if (!(fin = fopen((conf_file = ETC_MODULES_CONF), "r"))) {
- /* Fall back to non-standard name */
- if ((fin = fopen((conf_file = old_name), "r"))) {
- fprintf(stderr,
- "Warning: modutils is reading from %s because\n"
- " %s does not exist. The use of %s is\n"
- " deprecated, please rename %s to %s\n"
- " as soon as possible. Command\n"
- " mv %s %s\n",
- old_name, ETC_MODULES_CONF,
- old_name, old_name, ETC_MODULES_CONF,
- old_name, ETC_MODULES_CONF);
- }
- /* So what... use the default configuration */
- }
- }
-
- if (fin) {
- struct stat statbuf1, statbuf2;
- if (fstat(fileno(fin), &statbuf1) == 0)
- config_mtime = statbuf1.st_mtime;
- config_file = xstrdup(conf_file); /* Save name actually used */
- if (!conf_file_specified &&
- stat(ETC_MODULES_CONF, &statbuf1) == 0 &&
- stat(old_name, &statbuf2) == 0) {
- /* Both /etc files exist */
- if (statbuf1.st_dev == statbuf2.st_dev &&
- statbuf1.st_ino == statbuf2.st_ino) {
- if (lstat(ETC_MODULES_CONF, &statbuf1) == 0 &&
- S_ISLNK(statbuf1.st_mode))
- fprintf(stderr,
- "Warning: You do not need a link from %s to\n"
- " %s. The use of %s is deprecated,\n"
- " please remove %s and rename %s\n"
- " to %s as soon as possible. Commands.\n"
- " rm %s\n"
- " mv %s %s\n",
- ETC_MODULES_CONF, old_name,
- old_name, ETC_MODULES_CONF, old_name, ETC_MODULES_CONF,
- ETC_MODULES_CONF,
- old_name, ETC_MODULES_CONF);
- else {
-#ifndef NO_WARN_ON_OLD_LINK
- fprintf(stderr,
- "Warning: You do not need a link from %s to\n"
- " %s. The use of %s is deprecated,\n"
- " please remove %s as soon as possible. Command\n"
- " rm %s\n",
- old_name, ETC_MODULES_CONF,
- old_name, old_name,
- old_name);
-#endif
- }
- }
- else
- fprintf(stderr,
- "Warning: modutils is reading from %s and\n"
- " ignoring %s. The use of %s is deprecated,\n"
- " please remove %s as soon as possible. Command\n"
- " rm %s\n",
- ETC_MODULES_CONF, old_name,
- old_name, old_name,
- old_name);
- }
- }
-
- /*
- * Finally, decode the file
- */
- while (fin && fgets_strip(buf, sizeof(buf) - 1, fin, &lineno) != NULL) {
- char *arg2;
- char *parm = buf;
- char *arg;
- int one_err = 0;
- int adding;
-
- while (isspace(*parm))
- parm++;
-
- if (strncmp(parm, "add", 3) == 0) {
- adding = 1;
- parm += 3;
- while (isspace(*parm))
- parm++;
- } else
- adding = 0;
-
- arg = parm;
-
- if (*parm == '\0')
- continue;
-
- one_err = 1;
-
- while (*arg > ' ' && *arg != '=')
- arg++;
-
- if (*arg == '=')
- assgn = 1;
- else
- assgn = 0;
- *arg++ = '\0';
- while (isspace(*arg))
- arg++;
-
- /*
- * endif
- */
- if (!assgn && strcmp(parm, "endif") == 0) {
- if (level > 0)
- --level;
- else {
- error("unmatched endif in line %d", lineno);
- return -1;
- }
- continue;
- }
-
- /*
- * else
- */
- if (!assgn && strcmp(parm, "else") == 0) {
- if (level <= 0) {
- error("else without if in line %d", lineno);
- return -1;
- }
- state[level] = !state[level];
- continue;
- }
-
- /*
- * elseif
- */
- if (!assgn && strcmp(parm, "elseif") == 0) {
- if (level <= 0) {
- error("elseif without if in line %d", lineno);
- return -1;
- }
- if (state[level] != 0) {
- /*
- * We have already found a TRUE
- * if statement in this "chain".
- * That's what "2" means.
- */
- state[level] = 2;
- continue;
- }
- /* else: No TRUE if has been found, cheat */
- /*
- * The "if" handling increments level,
- * but this is the _same_ level as before.
- * So, compensate for it.
- */
- --level;
- parm = "if";
- /* Fallthru to "if" */
- }
-
- /*
- * if
- */
- if (strcmp(parm, "if") == 0) {
- char *cmp;
- int not = 0;
- int numeric = 0;
-
- if (level >= MAX_LEVEL) {
- error("Too many nested if's in line %d\n", lineno);
- return -1;
- }
- state[++level] = 0; /* default false */
-
- if (*arg == '!') {
- not = 1;
- arg = next_word(arg);
- }
-
- if (strncmp(arg, "-k", 2) == 0) {
- state[level] = flag_autoclean;
- continue;
- }
-
- if (strncmp(arg, "-f", 2) == 0) {
- char *file = next_word(arg);
- meta_expand(file, &g, NULL, version, ME_ALL);
- if (access(g.pathc ? g.pathv[0] : file, R_OK) == 0)
- state[level] = !not;
- else
- state[level] = not;
- continue;
- }
-
- if (strncmp(arg, "-n", 2) == 0) {
- numeric = 1;
- arg = next_word(arg);
- }
-
-
- cmp = next_word(arg);
- if (*cmp) {
- GLOB_LIST g2;
- long n1 = 0;
- long n2 = 0;
- char *w1 = "";
- char *w2 = "";
-
- arg2 = next_word(cmp);
-
- meta_expand(arg, &g, NULL, version, ME_ALL);
- if (g.pathc && g.pathv[0])
- w1 = g.pathv[0];
-
- meta_expand(arg2, &g2, NULL, version, ME_ALL);
- if (g2.pathc && g2.pathv[0])
- w2 = g2.pathv[0];
-
- if (numeric) {
- n1 = strtol(w1, NULL, 0);
- n2 = strtol(w2, NULL, 0);
- }
-
- if (strcmp(cmp, "==") == 0 ||
- strcmp(cmp, "=") == 0) {
- if (numeric)
- state[level] = (n1 == n2);
- else
- state[level] = strcmp(w1, w2) == 0;
- } else if (strcmp(cmp, "!=") == 0) {
- if (numeric)
- state[level] = (n1 != n2);
- else
- state[level] = strcmp(w1, w2) != 0;
- } else if (strcmp(cmp, ">=") == 0) {
- if (numeric)
- state[level] = (n1 >= n2);
- else
- state[level] = strcmp(w1, w2) >= 0;
- } else if (strcmp(cmp, "<=") == 0) {
- if (numeric)
- state[level] = (n1 <= n2);
- else
- state[level] = strcmp(w1, w2) <= 0;
- } else if (strcmp(cmp, ">") == 0) {
- if (numeric)
- state[level] = (n1 > n2);
- else
- state[level] = strcmp(w1, w2) > 0;
- } else if (strcmp(cmp, "<") == 0) {
- if (numeric)
- state[level] = (n1 < n2);
- else
- state[level] = strcmp(w1, w2) < 0;
- }
- } else { /* Check defined value, if any */
- /* undef or defined as
- * "" or "0" or "false" => false
- * defined => true
- */
- if (!meta_expand(arg, &g, NULL, version, ME_ALL) &&
- g.pathc > 0 &&
- strcmp(g.pathv[0], "0") != 0 &&
- strcmp(g.pathv[0], "false") != 0 &&
- strlen(g.pathv[0]) != 0)
- state[level] = 1; /* true */
- }
- if (not)
- state[level] = !state[level];
-
- continue;
- }
-
- /*
- * Should we bother?
- */
- if (state[level] != 1)
- continue;
-
- /*
- * define
- */
- if (!assgn && strcmp(parm, "define") == 0) {
- char env[PATH_MAX];
-
- arg2 = next_word(arg);
- meta_expand(arg2, &g, NULL, version, ME_ALL);
- snprintf(env, sizeof(env), "%s=%s", arg, (g.pathc ? g.pathv[0] : ""));
- putenv(env);
- one_err = 0;
- }
-
- /*
- * include
- */
- if (!assgn && strcmp(parm, "include") == 0) {
- meta_expand(arg, &g, NULL, version, ME_ALL);
-
- if (!do_read(all, version, base_dir, g.pathc ? g.pathv[0] : arg, depth+1))
- one_err = 0;
- else
- error("include %s failed\n", arg);
- }
-
- /*
- * above
- */
- else if (all && !assgn && strcmp(parm, "above") == 0) {
- decode_list(&n_abovelist, &abovelist, arg, adding, version, 0);
- one_err = 0;
- }
-
- /*
- * below
- */
- else if (all && !assgn && strcmp(parm, "below") == 0) {
- decode_list(&n_belowlist, &belowlist, arg, adding, version, 0);
- one_err = 0;
- }
-
- /*
- * prune
- */
- else if (all && !assgn && strcmp(parm, "prune") == 0) {
- decode_list(&n_prunelist, &prunelist, arg, adding, version, 0);
- one_err = 0;
- }
-
- /*
- * probe
- */
- else if (all && !assgn && strcmp(parm, "probe") == 0) {
- decode_list(&n_probe_list, &probe_list, arg, adding, version, 0);
- one_err = 0;
- }
-
- /*
- * probeall
- */
- else if (all && !assgn && strcmp(parm, "probeall") == 0) {
- decode_list(&n_probeall_list, &probeall_list, arg, adding, version, 0);
- one_err = 0;
- }
-
- /*
- * options
- */
- else if (all && !assgn && strcmp(parm, "options") == 0) {
- decode_list(&n_opt_list, &opt_list, arg, adding, version, 1);
- one_err = 0;
- }
-
- /*
- * alias
- */
- else if (all && !assgn && strcmp(parm, "alias") == 0) {
- /*
- * Replace any previous (default) definitions
- * for the same module
- */
- decode_list(&n_aliases, &aliases, arg, 0, version, 0);
- one_err = 0;
- }
-
- /*
- * Specification: /etc/modules.conf
- * The format of the commands in /etc/modules.conf are:
- *
- * pre-install module command
- * install module command
- * post-install module command
- * pre-remove module command
- * remove module command
- * post-remove module command
- *
- * The different words are separated by tabs or spaces.
- */
- /*
- * pre-install
- */
- else if (all && !assgn && (strcmp(parm, "pre-install") == 0)) {
- decode_exec(arg, EXEC_PRE_INSTALL);
- one_err = 0;
- }
-
- /*
- * install
- */
- else if (all && !assgn && (strcmp(parm, "install") == 0)) {
- decode_exec(arg, EXEC_INSTALL);
- one_err = 0;
- }
-
- /*
- * post-install
- */
- else if (all && !assgn && (strcmp(parm, "post-install") == 0)) {
- decode_exec(arg, EXEC_POST_INSTALL);
- one_err = 0;
- }
-
- /*
- * pre-remove
- */
- else if (all && !assgn && (strcmp(parm, "pre-remove") == 0)) {
- decode_exec(arg, EXEC_PRE_REMOVE);
- one_err = 0;
- }
-
- /*
- * remove
- */
- else if (all && !assgn && (strcmp(parm, "remove") == 0)) {
- decode_exec(arg, EXEC_REMOVE);
- one_err = 0;
- }
-
- /*
- * post-remove
- */
- else if (all && !assgn && (strcmp(parm, "post-remove") == 0)) {
- decode_exec(arg, EXEC_POST_REMOVE);
- one_err = 0;
- }
-
- /*
- * insmod_opt=
- */
- else if (assgn && (strcmp(parm, "insmod_opt") == 0)) {
- insmod_opt = xstrdup(arg);
- one_err = 0;
- }
-
- /*
- * keep
- */
- else if (!assgn && (strcmp(parm, "keep") == 0)) {
- drop_default_paths = 0;
- one_err = 0;
- }
-
- /*
- * path...=
- */
- else if (assgn && strncmp(parm, "path", 4) == 0) {
- /*
- * Specification: config file / path parameter
- * The path parameter specifies a directory to
- * search for modules.
- * This parameter may be repeated multiple times.
- *
- * Note that the actual path may be defined using
- * wildcards and other shell meta-chars, such as "*?`".
- * For example:
- * path[misc]=/lib/modules/1.1.5?/misc
- *
- * Optionally the path keyword carries a tag.
- * This tells us a little more about the purpose of
- * this directory and allows some automated operations.
- * A path is marked with a tag by adding the tag,
- * enclosed in square brackets, to the path keyword:
- * #
- * path[boot]=/lib/modules/boot
- * #
- * This case identifies the path a of directory
- * holding modules loadable a boot time.
- */
-
- if (drop_default_paths) {
- int n;
-
- /*
- * Specification: config file / path / default
- *
- * Whenever there is a path[] specification
- * in the config file, all the default
- * path are reset.
- *
- * If one instead wants to _add_ to the default
- * set of paths, one has to have the option
- * keep
- * before the first path[]-specification line
- * in the configuration file.
- */
- drop_default_paths = 0;
- for (n = 0; n < nmodpath; n++) {
- free(modpath[n].path);
- free(modpath[n].type);
- }
- nmodpath = 0;
- }
-
- /*
- * Get (the optional) tag
- * If the tag is missing, the word "misc"
- * is assumed.
- */
- type = "misc";
-
- if (parm[4] == '[') {
- char *pt_type = parm + 5;
-
- while (*pt_type != '\0' && *pt_type != ']')
- pt_type++;
-
- if (*pt_type == ']' && pt_type[1] == '\0') {
- *pt_type = '\0';
- type = parm + 5;
- } /* else CHECKME */
- }
-
- /*
- * Handle the actual path description
- */
- if (meta_expand(arg, &g, base_dir, version, ME_ALL))
- return -1;
- for (glb = g.pathv; glb && *glb; ++glb) {
- modpath[nmodpath].type = xstrdup(type);
- modpath[nmodpath].path = *glb;
- if (++nmodpath >= maxpath) {
- maxpath += 100;
- modpath = (struct PATH_TYPE *)xrealloc(modpath,
- maxpath * sizeof(struct PATH_TYPE));
- }
- }
- one_err = 0;
- }
-
- /*
- * persistdir
- */
- else if (assgn && strcmp(parm, "persistdir") == 0) {
- meta_expand(arg, &g, NULL, version, ME_ALL);
- persistdir = xstrdup(g.pathc ? g.pathv[0] : arg);
- one_err = 0;
- }
-
- /* Names for generated files in config file */
- for (i = 0; one_err && i < gen_file_count; ++i)
- one_err = gen_file_conf(gen_file+i, assgn, parm, arg);
-
- /*
- * any errors so far?
- */
- if (all == 0)
- one_err = 0;
- else if (one_err) {
- error("Invalid line %d in %s\n\t%s",
- lineno, conf_file, buf);
- ret = -1;
- }
- }
- if (fin)
- fclose(fin);
-
- if (level) {
- error("missing endif at %s EOF", conf_file);
- ret = -1;
- }
-
- if (ret)
- return ret;
- /* else */
-
- /* Check we have names for generated files */
- for (i = 0; !ret && i < gen_file_count; ++i)
- ret = gen_file_check(gen_file+i, &g, base_dir, version);
-
- return ret;
-}
-
-int config_read(int all, char *force_ver, char *base_dir, char *conf_file)
-{
- int r;
- if (modpath != NULL)
- return 0; /* already initialized */
-
- if (uname(&uts_info) < 0) {
- error("Failed to find kernel name information");
- return -1;
- }
-
- r = do_read(all, force_ver, base_dir, conf_file, 0);
-
- if (quick && !r && !need_update (force_ver, base_dir))
- exit (0);
-
- return r;
-}
-
-/****************************************************************************/
-/*
- * FIXME: Far too much global state. KAO.
- */
-static int found;
-static int favail;
-static int one_only;
-static int meta_expand_type;
-char **list;
-static const char *filter_by_file;
-static char *filter_by_dir;
-
-/*
- * Add a file name if it exist
- */
-static int config_add(const char *file, const struct stat *sb)
-{
- int i;
- int npaths = 0;
- char **paths = NULL;
-
- if (meta_expand_type) {
- GLOB_LIST g;
- char **p;
- char full[PATH_MAX];
-
- snprintf(full, sizeof(full), "%s/%s", file, filter_by_file);
-
- if (filter_by_dir && !strstr(full, filter_by_dir))
- return 0;
-
- if (meta_expand(full, &g, NULL, config_version, meta_expand_type))
- return 1;
- for (p = g.pathv; p && *p; ++p) {
- paths = (char **)xrealloc(paths,
- (npaths + 1) * sizeof(char *));
- paths[npaths++] = *p;
- }
- } else { /* normal path match or match with "*" */
- if (!S_ISREG(sb->st_mode))
- return 0;
-
- if (strcmp(filter_by_file, "*")) {
- char *p;
-
- if ((p = strrchr(file, '/')) == NULL)
- p = (char *)file;
- else
- p += 1;
-
- if (strcmp(p, filter_by_file))
- return 0;
- }
- if (filter_by_dir && !strstr(file, filter_by_dir))
- return 0;
- paths = (char **)xmalloc(sizeof(char **));
- *paths = xstrdup(file);
- npaths = 1;
- }
-
- for (i = 0; i < npaths; ++i) {
- struct stat sbuf;
-
- if (S_ISDIR(sb->st_mode)) {
- if (stat(paths[i], &sbuf) == 0)
- sb = &sbuf;
- }
- if (S_ISREG(sb->st_mode) && sb->st_mode & S_IRUSR) {
- int j;
- char **this;
-
- if (!root_check_off) {
- if (sb->st_uid != 0) {
- error("%s is not owned by root", paths[i]);
- continue;
- }
- }
-
- /* avoid duplicates */
- for (j = 0, this = list; j < found; ++j, ++this) {
- if (strcmp(*this, paths[i]) == 0) {
- free(paths[i]);
- goto next;
- }
- }
-
- list[found] = paths[i];
- if (++found >= favail)
- list = (char **)xrealloc(list,
- (favail += 100) * sizeof(char *));
-
- if (one_only) {
- for (j = i + 1; j < npaths; ++j)
- free(paths[j]);
- free(paths);
- return 1; /* finish xftw */
- }
- }
- next:
- }
-
- if (npaths > 0)
- free(paths);
-
- return 0;
-}
-
-/*
- * Find modules matching the name "match" in directory of type "type"
- * (type == NULL matches all)
- *
- * Return a pointer to the list of modules found (or NULL if error).
- * Update the counter (sent as parameter).
- */
-GLOB_LIST *config_lstmod(const char *match, const char *type, int first_only)
-{
- /*
- * Note:
- * There are _no_ wildcards remaining in the path descriptions!
- */
- struct stat sb;
- int i;
- int ret = 0;
- char *path = NULL;
- char this[PATH_MAX];
-
- if (!match)
- match = "*";
- one_only = first_only;
- found = 0;
- filter_by_file = match;
- filter_by_dir = NULL;
- if (type) {
- char tmpdir[PATH_MAX];
- snprintf(tmpdir, sizeof(tmpdir), "/%s/", type);
- filter_by_dir = xstrdup(tmpdir);
- }
- /* In safe mode, the module name is always handled as is, without meta
- * expansion. It might have come from an end user via kmod and must
- * not be trusted. Even in unsafe mode, only apply globbing to the
- * module name, not command expansion. We trust config file input so
- * applying command expansion is safe, we do not trust command line input.
- * This assumes that the only time the user can specify -C config file
- * is when they run under their own authority. In particular all
- * mechanisms that call modprobe as root on behalf of the user must
- * run in safe mode, without letting the user supply a config filename.
- */
- meta_expand_type = 0;
- if (strpbrk(match, SHELL_META) && strcmp(match, "*") && !safemode)
- meta_expand_type = ME_GLOB|ME_BUILTIN_COMMAND;
-
- list = (char **)xmalloc((favail = 100) * sizeof(char *));
-
- for (i = 0; i < nmodpath; i++) {
- path = modpath[i].path;
- /* Special case: insmod: handle single, non-wildcard match */
- if (first_only && strpbrk(match, SHELL_META) == NULL) {
- /* Fix for "2.1.121 syntax */
- snprintf(this, sizeof(this), "%s/%s/%s", path,
- modpath[i].type, match);
- if (stat(this, &sb) == 0 &&
- config_add(this, &sb))
- break;
- /* End fix for "2.1.121 syntax */
-
- snprintf(this, sizeof(this), "%s/%s", path, match);
- if (stat(this, &sb) == 0 &&
- config_add(this, &sb))
- break;
- }
-
- /* Start looking */
- if ((ret = xftw(path, config_add))) {
- break;
- }
- }
- if (ret >= 0) {
- GLOB_LIST *g = (GLOB_LIST *)xmalloc(sizeof(GLOB_LIST));
- g->pathc = found;
- g->pathv = list;
- free(filter_by_dir);
- return g;
- }
- free(list);
- free(filter_by_dir);
- return NULL;
-}
-
-/* Given a bare module name, poke through the module path to find the file. */
-char *search_module_path(const char *base)
-{
- GLOB_LIST *g;
-
- if (config_read(0, NULL, "", NULL) < 0)
- return NULL;
- /* else */
- g = config_lstmod(base, NULL, 1);
- if (g == NULL || g->pathc == 0) {
- char base_o[PATH_MAX];
-
- snprintf(base_o, sizeof(base_o), "%s.o", base);
- g = config_lstmod(base_o, NULL, 1);
-#ifdef CONFIG_USE_ZLIB
- if (g == NULL || g->pathc == 0) {
- snprintf(base_o, sizeof(base_o), "%s.o.gz", base);
- g = config_lstmod(base_o, NULL, 1);
- }
-#endif
- }
- if (g == NULL || g->pathc == 0)
- return NULL;
- /* else */
- return g->pathv[0];
-}
diff --git a/mdk-stage1/insmod-modutils/util/gzfiles.c b/mdk-stage1/insmod-modutils/util/gzfiles.c
deleted file mode 100644
index 8d02253bb..000000000
--- a/mdk-stage1/insmod-modutils/util/gzfiles.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * This simple library intends to make it transparent to read gzipped and/or
- * standard files. This is simple enough to fit modutils' needs, but may be
- * easily adapted to anyone's needs. It's completely free, do what you want
- * with it . - Willy Tarreau <willy@meta-x.org> - 2000/05/05 -
- */
-
-#ifdef CONFIG_USE_ZLIB
-
-#include <stdio.h>
-#include <zlib.h>
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-/* redefinition of gz_stream which isn't exported by zlib */
-typedef struct gz_stream {
- z_stream stream;
- int z_err; /* error code for last stream operation */
- int z_eof; /* set if end of input file */
- FILE *file; /* .gz file */
- Byte *inbuf; /* input buffer */
- Byte *outbuf; /* output buffer */
- uLong crc; /* crc32 of uncompressed data */
- char *msg; /* error message */
- char *path; /* path name for debugging only */
- int transparent; /* 1 if input file is not a .gz file */
- char mode; /* 'w' or 'r' */
- long startpos; /* start of compressed data in file (header skipped) */
-} gz_stream;
-
-/* maximum number of simultaneous open files, also greater file descriptor number */
-#define MAXFD 64
-
-/* this static list is assumed to be filled with NULLs at runtime */
-static gzFile gzf_fds[MAXFD];
-
-/* returns the filedesc of the opened file. */
-int gzf_open(const char *name, int mode) {
- int fd;
- gzFile g;
-
- if ((g=gzopen(name, "rb")) != NULL) {
- fd=fileno(((gz_stream*)g)->file);
- gzf_fds[fd]=g;
- }
- else if ((fd=open(name, mode)) != -1) {
- gzf_fds[fd]=NULL; /* NULL means not GZ mode */
- }
- return fd;
-}
-
-off_t gzf_lseek(int fd, off_t offset, int whence) {
- if (fd<0 || fd>=MAXFD || gzf_fds[fd]==NULL)
- return lseek(fd, offset, whence);
- else
- return gzseek(gzf_fds[fd], offset, whence);
-}
-
-int gzf_read(int fd, void *buf, size_t count) {
- if (fd<0 || fd>=MAXFD || gzf_fds[fd]==NULL)
- return read(fd, buf, count);
- else
- return gzread(gzf_fds[fd], buf, count);
-}
-
-void gzf_close(int fd) {
- if (fd<0 || fd>=MAXFD || gzf_fds[fd]==NULL)
- close(fd);
- else
- gzclose(gzf_fds[fd]);
-}
-#endif
-
diff --git a/mdk-stage1/insmod-modutils/util/logger.c b/mdk-stage1/insmod-modutils/util/logger.c
deleted file mode 100644
index 3b790df5a..000000000
--- a/mdk-stage1/insmod-modutils/util/logger.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/* Error logging facilities.
- Copyright 1996, 1997 Linux International.
-
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-#ident "$Id$"
-
-#include <stdio.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <syslog.h>
-
-#include "util.h"
-
-/*======================================================================*/
-
-int errors;
-const char *error_file;
-int log;
-
-#define STOREMSG
-#ifdef STOREMSG
-struct cbuf {
- struct cbuf *next;
- int type;
- char *msg;
-} *head, *tail;
-
-static void savemsg(int type, char *msg)
-{
- struct cbuf *me = (struct cbuf *)xmalloc(sizeof(struct cbuf));
- char *s = xstrdup(msg);
-
- me->next = NULL;
- me->type = type;
- me->msg = s;
-
- if (tail)
- tail->next = me;
- else
- head = me;
- tail = me;
-}
-
-#endif /* STOREMSG */
-
-static void dumpmsg(void)
-{
- for (;head; head = head->next)
- syslog(head->type, "%s", head->msg);
-}
-
-void setsyslog(const char *program)
-{
- openlog(program, LOG_CONS, LOG_DAEMON);
-#ifdef STOREMSG
- atexit(dumpmsg);
-#endif
- log = 1;
-}
-
-
-
-#ifdef _STANDALONE_
-static int silent;
-
-const char *program_name;
-
-void error(const char *fmt,...)
-{
- va_list args;
-
- if (silent)
- ;
- else if (log) {
- char buf[1024];
- int n;
-
- if (error_file)
- n = snprintf(buf, sizeof(buf), "%s: ", error_file);
- else
- n = 0;
- va_start(args, fmt);
- vsnprintf(buf + n, sizeof(buf) - n, fmt, args);
- va_end(args);
-#ifdef STOREMSG
- savemsg(LOG_ERR, buf);
-#else
- syslog(LOG_ERR, "%s", buf);
-#endif
- } else {
- if (error_file)
- fprintf(stderr, "%s: ", error_file);
- va_start(args, fmt);
- vfprintf(stderr, fmt, args);
- va_end(args);
- putc('\n', stderr);
- }
-
- errors++;
-}
-
-void lprintf(const char *fmt,...)
-{
- va_list args;
-
- if (silent);
- else if (log) {
- char buf[1024];
- va_start(args, fmt);
- vsnprintf(buf, sizeof(buf), fmt, args);
- va_end(args);
-#ifdef STOREMSG
- savemsg(LOG_INFO, buf);
-#else
- syslog(LOG_INFO, "%s", buf);
-#endif
- } else {
- va_start(args, fmt);
- vfprintf(stdout, fmt, args);
- va_end(args);
- putchar('\n');
- }
-}
-
-#else /* _STANDALONE_ */
-#include "../../log.h"
-void error(const char *s, ...)
-{
- va_list p;
-
- va_start(p, s);
- vlog_message(s, p);
- va_end(p);
-}
-
-void lprintf(const char *s, ...)
-{
- va_list p;
-
- va_start(p, s);
- vlog_message(s, p);
- va_end(p);
-}
-#endif
diff --git a/mdk-stage1/insmod-modutils/util/meta_expand.c b/mdk-stage1/insmod-modutils/util/meta_expand.c
deleted file mode 100644
index 41fb4024c..000000000
--- a/mdk-stage1/insmod-modutils/util/meta_expand.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * Handle expansion of meta charaters
- *
- * Copyright 1999 Björn Ekwall <bj0rn@blox.se>
- *
- * "kernelversion" idea from the Debian release via:
- * Wichert Akkerman <wakkerma@cs.leidenuniv.nl>
- *
- * Use wordexp(): idea from Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * Alpha typecast: Michal Jaegermann <michal@ellpspace.math.ualberta.ca>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifdef HAVE_WORDEXP
-#undef HAVE_WORDEXP
-#define HAVE_WORDEXP 0
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <limits.h>
-#include <string.h>
-#include <ctype.h>
-#if HAVE_WORDEXP
-#include <wordexp.h>
-#elif HAVE_GLOB
-#include <glob.h>
-#endif
-#include "util.h"
-
-/*
- * Split into words delimited by whitespace,
- * handle remaining quotes though...
- * If strip_quotes != 0 then strip one level of quotes from the line.
- */
-static void split_line(GLOB_LIST *g, char *line, int strip_quotes)
-{
- int len;
- char *d;
- char *e;
- char *p;
- char tmpline[PATH_MAX];
-
- for (p = line; *p; p = e) {
- /* Skip leading whitespace */
- while (*p && isspace(*p))
- ++p;
-
- /* find end of word */
- d = tmpline;
- for (e = p; *e && !(isspace(*e)); ++e) {
- char match;
-
- /* Quote handling */
- switch (*e) {
- case '\\':
- if (!strip_quotes)
- *d++ = *e;
- break;
-
- case '"':
- case '\'':
- match = *e;
- if (!strip_quotes)
- *d++ = *e;
- for (++e; *e && *e != match; ++e) {
- *d++ = *e;
- if (*e == '\\' && *(e + 1) == match)
- *d++ = *++e;
- }
- if (!strip_quotes)
- *d++ = *e;
- break;
-
- default:
- *d++ = *e;
- break;
- }
- }
-
- if ((len = (int)(d - tmpline)) > 0) {
- char *str = xmalloc(len + 1);
- strncpy(str, tmpline, len);
- str[len] = '\0';
- g->pathv = (char **)xrealloc(g->pathv,
- (g->pathc + 2) * sizeof(char *));
- g->pathv[g->pathc++] = str;
- }
- }
-
- if (g->pathc)
- g->pathv[g->pathc] = NULL;
-}
-
-static int glob_it(char *pt, GLOB_LIST *g)
-{
-#if HAVE_WORDEXP
- wordexp_t w;
-
- memset(&w, 0, sizeof(w));
- if (wordexp(pt, &w, WRDE_UNDEF)) {
- /*
- error("wordexp %s failed", pt);
- */
- return -1;
- }
- /* else */
- g->pathc = w.we_wordc;
- g->pathv = w.we_wordv;
-
- return 0;
-#elif HAVE_GLOB /* but not wordexp */
- glob_t w;
-
- memset(&w, 0, sizeof(w));
- if (glob(pt, GLOB_NOSORT, NULL, &w)) {
- /*
- error("glob %s failed", pt);
- */
- return -1;
- }
- /* else */
- if (w.gl_pathc && strpbrk(w.gl_pathv[0], SHELL_META)) {
- globfree(&w);
- return -1;
- }
- g->pathc = w.gl_pathc;
- g->pathv = w.gl_pathv;
-
- return 0;
-#else /* Neither wordexp nor glob */
- return -1;
-#endif
-}
-
-/*
- * Expand the string (including meta-character) to a list of matches
- *
- * Return 0 if OK else -1
- */
-int meta_expand(char *pt, GLOB_LIST *g, char *base_dir, char *version, int type)
-{
- FILE *fin;
- int len = 0;
- char *line = NULL;
- char *p, *p1;
- char tmpline[PATH_MAX + 1];
- char wrk[sizeof(tmpline)];
- char tmpcmd[2*sizeof(tmpline)+20]; /* room for /bin/echo "text" */
-
- g->pathc = 0;
- g->pathv = NULL;
-
- /*
- * Take care of version dependent expansions
- * Needed for forced version handling
- */
- if ((p = strchr(pt, '`')) != NULL && (type & ME_BUILTIN_COMMAND)) {
- do {
- char *s;
-
- for (s = p + 1; isspace(*s); ++s)
- ;
-
- if (strncmp(s, "uname -r", 8) == 0) {
- while (*s && (*s != '`'))
- ++s;
- if (*s == '`') {
- *p = '\0';
- snprintf(wrk, sizeof(wrk), "%s%s%s",
- pt,
- version,
- s + 1);
- *p = '`';
- }
- strcpy(tmpline, wrk); /* safe, same size */
- pt = tmpline;
- } else if (strncmp(s, "kernelversion", 13) == 0) {
- while (*s && (*s != '`'))
- ++s;
- if (*s == '`') {
- int n;
- char *k;
-
- *p = '\0';
- for (n = 0, k = version; *k; ++k) {
- if (*k == '.' && ++n == 2)
- break;
- }
- snprintf(wrk, sizeof(wrk), "%s%.*s%s",
- pt,
- /* typecast for Alpha */
- (int)(k - version),
- version,
- s + 1);
- *p = '`';
- strcpy(tmpline, wrk); /* safe, same size */
- pt = tmpline;
- }
- } else
- break;
- } while ((p = strchr(pt, '`')) != NULL);
- }
-
- /*
- * Any remaining meta-chars?
- */
- if (strpbrk(pt, SHELL_META) == NULL) {
- /*
- * No meta-chars.
- * Split into words, delimited by whitespace.
- */
- snprintf(wrk, sizeof(wrk), "%s%s", (base_dir ? base_dir : ""), pt);
- strcpy(tmpline, wrk); /* safe, same size */
- if ((p = strtok(tmpline, " \t\n")) != NULL) {
- while (p) {
- g->pathv = (char **)xrealloc(g->pathv,
- (g->pathc + 2) * sizeof(char *));
- g->pathv[g->pathc++] = xstrdup(p);
- p = strtok(NULL, " \t\n");
- }
- }
- if (g->pathc)
- g->pathv[g->pathc] = NULL;
- return 0;
- }
- /* else */
- /*
- * Handle remaining meta-chars
- */
-
- /*
- * Just plain quotes?
- */
- if (strpbrk(pt, "&();|<>$`!{}[]~=+:?*") == NULL &&
- (p = strpbrk(pt, "\"'\\"))) {
- split_line(g, pt, 1);
- return 0;
- }
-
- if (strpbrk(pt, "&();|<>$`\"'\\!{}~+:[]~?*") == NULL) {
- /* Only "=" remaining, should be module options */
- split_line(g, pt, 0);
- return 0;
- }
-
- /*
- * If there are meta-characters and
- * if they are only shell glob meta-characters: do globbing
- */
-#if HAVE_WORDEXP
- if (strpbrk(pt, "&();|<>`\"'\\!{}~=+:") == NULL &&
- strpbrk(pt, "$[]~?*"))
-#else
- if (strpbrk(pt, "&();|<>$`\"'\\!{}~=+:") == NULL &&
- strpbrk(pt, "[]~?*"))
-#endif
- if ((type & ME_GLOB) && glob_it(pt, g) == 0)
- return 0;
-
- if (strpbrk(pt, "&();|<>$`\"'\\!{}~+:[]~?*") == NULL) {
- /* Only "=" remaining, should be module options */
- split_line(g, pt, 0);
- return 0;
- }
-
- /*
- * Last resort: Use "echo".
- * DANGER: Applying shell expansion to user supplied input is a
- * major security risk. Modutils code should only do meta
- * expansion via shell commands for trusted data. Basically
- * this means only for data in the config file. Even that
- * assumes that the user cannot run modprobe as root with
- * their own config file. Programs (including the kernel)
- * that invoke modprobe as root with user supplied input must
- * pass exactly one user supplied parameter and must set
- * safe mode.
- */
- if (!(type & ME_SHELL_COMMAND))
- return 0;
- snprintf(wrk, sizeof(wrk), "%s%s", (base_dir ? base_dir : ""), pt);
- strcpy(tmpline, wrk); /* safe, same size */
- snprintf(tmpcmd, sizeof(tmpcmd), "/bin/echo \"");
- for (p = tmpline, p1 = tmpcmd + strlen(tmpcmd); *p; ++p, ++p1) {
- if (*p == '"' || *p == '\\')
- *p1++ = '\\';
- *p1 = *p;
- }
- *p1++ = '"';
- *p1++ = '\0';
- if (p1 - tmpcmd > sizeof(tmpcmd)) {
- error("tmpcmd overflow, should never happen");
- exit(1);
- }
- if ((fin = popen(tmpcmd, "r")) == NULL) {
- error("Can't execute: %s", tmpcmd);
- return -1;
- }
- /* else */
-
- /*
- * Collect the result
- */
- while (fgets(tmpcmd, PATH_MAX, fin) != NULL) {
- int l = strlen(tmpcmd);
-
- line = (char *)xrealloc(line, len + l + 1);
- line[len] = '\0';
- strcat(line + len, tmpcmd); /* safe, realloc */
- len += l;
- }
- pclose(fin);
-
- if (line) {
- /* shell used to strip one set of quotes. Paranoia code in
- * 2.3.20 stops that strip so we do it ourselves.
- */
- split_line(g, line, 1);
- free(line);
- }
-
- return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/util/modstat.c b/mdk-stage1/insmod-modutils/util/modstat.c
deleted file mode 100644
index ad82306c0..000000000
--- a/mdk-stage1/insmod-modutils/util/modstat.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * Get kernel symbol table(s) and other relevant module info.
- *
- * Add module_name_list and l_module_name_list.
- * Keith Owens <kaos@ocs.com.au> November 1999.
- * Björn Ekwall <bj0rn@blox.se> in February 1999 (C)
- * Initial work contributed by Richard Henderson <rth@tamu.edu>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <errno.h>
-#include "util.h"
-#include "module.h"
-#include "obj.h"
-#include "modstat.h"
-
-struct module_stat *module_stat;
-size_t n_module_stat;
-char *module_name_list;
-size_t l_module_name_list;
-struct module_symbol *ksyms;
-size_t nksyms;
-int k_new_syscalls;
-
-static void *old_kernsym;
-
-/************************************************************************/
-static void drop(void)
-{
- /*
- * Clean the slate for multiple runs
- */
- if (module_stat) {
- struct module_stat *m;
- int i;
-
- for (i = 0, m = module_stat; i < n_module_stat; ++i, ++m) {
- if (m->syms)
- free(m->syms);
- if (m->refs)
- free(m->refs);
- }
- free(module_stat);
- module_stat = NULL;
- n_module_stat = 0;
- }
- if (module_name_list) {
- free(module_name_list);
- module_name_list = NULL;
- l_module_name_list = 0;
- }
- if (ksyms) {
- free(ksyms);
- ksyms = NULL;
- nksyms = 0;
- }
- if (old_kernsym) {
- free(old_kernsym);
- old_kernsym = NULL;
- }
-}
-
-static int new_get_kernel_info(int type)
-{
- struct module_stat *modules;
- struct module_stat *m;
- struct module_symbol *syms;
- struct module_symbol *s;
- size_t ret;
- size_t bufsize;
- size_t nmod;
- size_t nsyms;
- size_t i;
- size_t j;
- char *module_names;
- char *mn;
-
- drop();
-
- /*
- * Collect the loaded modules
- */
- module_names = xmalloc(bufsize = 256);
- while (query_module(NULL, QM_MODULES, module_names, bufsize, &ret)) {
- if (errno != ENOSPC) {
- error("QM_MODULES: %m\n");
- return 0;
- }
- module_names = xrealloc(module_names, bufsize = ret);
- }
- module_name_list = module_names;
- l_module_name_list = bufsize;
- n_module_stat = nmod = ret;
- module_stat = modules = xmalloc(nmod * sizeof(struct module_stat));
- memset(modules, 0, nmod * sizeof(struct module_stat));
-
- /* Collect the info from the modules */
- for (i = 0, mn = module_names, m = modules;
- i < nmod;
- ++i, ++m, mn += strlen(mn) + 1) {
- struct module_info info;
-
- m->name = mn;
- if (query_module(mn, QM_INFO, &info, sizeof(info), &ret)) {
- if (errno == ENOENT) {
- /* The module was removed out from underneath us. */
- m->flags = NEW_MOD_DELETED;
- continue;
- }
- /* else oops */
- error("module %s: QM_INFO: %m", mn);
- return 0;
- }
-
- m->addr = info.addr;
-
- if (type & K_INFO) {
- m->size = info.size;
- m->flags = info.flags;
- m->usecount = info.usecount;
- m->modstruct = info.addr;
- }
-
- if (type & K_REFS) {
- int mm;
- char *mrefs;
- char *mr;
-
- mrefs = xmalloc(bufsize = 64);
- while (query_module(mn, QM_REFS, mrefs, bufsize, &ret)) {
- if (errno != ENOSPC) {
- error("QM_REFS: %m");
- return 1;
- }
- mrefs = xrealloc(mrefs, bufsize = ret);
- }
- for (j = 0, mr = mrefs;
- j < ret;
- ++j, mr += strlen(mr) + 1) {
- for (mm = 0; mm < i; ++mm) {
- if (strcmp(mr, module_stat[mm].name) == 0) {
- m->nrefs += 1;
- m->refs = xrealloc(m->refs, m->nrefs * sizeof(struct module_stat **));
- m->refs[m->nrefs - 1] = module_stat + mm;
- break;
- }
- }
- }
- free(mrefs);
- }
-
- if (type & K_SYMBOLS) { /* Want info about symbols */
- syms = xmalloc(bufsize = 1024);
- while (query_module(mn, QM_SYMBOLS, syms, bufsize, &ret)) {
- if (errno == ENOSPC) {
- syms = xrealloc(syms, bufsize = ret);
- continue;
- }
- if (errno == ENOENT) {
- /*
- * The module was removed out
- * from underneath us.
- */
- m->flags = NEW_MOD_DELETED;
- free(syms);
- goto next;
- } else {
- error("module %s: QM_SYMBOLS: %m", mn);
- return 0;
- }
- }
- nsyms = ret;
-
- m->nsyms = nsyms;
- m->syms = syms;
-
- /* Convert string offsets to string pointers */
- for (j = 0, s = syms; j < nsyms; ++j, ++s)
- s->name += (unsigned long) syms;
- }
- next:
- }
-
- if (type & K_SYMBOLS) { /* Want info about symbols */
- /* Collect the kernel's symbols. */
- syms = xmalloc(bufsize = 16 * 1024);
- while (query_module(NULL, QM_SYMBOLS, syms, bufsize, &ret)) {
- if (errno != ENOSPC) {
- error("kernel: QM_SYMBOLS: %m");
- return 0;
- }
- syms = xrealloc(syms, bufsize = ret);
- }
- nksyms = nsyms = ret;
- ksyms = syms;
-
- /* Convert string offsets to string pointers */
- for (j = 0, s = syms; j < nsyms; ++j, ++s)
- s->name += (unsigned long) syms;
- }
-
- return 1;
-}
-
-#ifdef COMPAT_2_0
-/************************************************************************/
-
-#define mscan(offs,siz,ptr) \
- if (lseek(kmem_fd, (off_t)(offs), SEEK_SET) == -1 || \
- read(kmem_fd, (ptr), (siz)) != (siz)) { \
- if (kmem_fd != -1) \
- close(kmem_fd); \
- error("kmem: %m"); \
- return 0; \
- }
-
-#define OLD_MOD_RUNNING 1
-#define OLD_MOD_DELETED 2
-#define OLD_MOD_VISITED 0x20000000
-
-/* Fetch all the symbols and divvy them up as appropriate for the modules. */
-static int old_get_kernel_info(int type)
-{
- struct old_kernel_sym *kernsym;
- struct old_kernel_sym *k;
- struct module_stat *module;
- struct module_stat *mod;
- struct module_symbol *s = NULL;
- int kmem_fd = -1;
- int nkernsym;
- int nmod;
- int nm;
- int nms;
- int i;
-
- drop();
- module_name_list = xmalloc(1);
- *module_name_list = '\0';
-
- if ((nkernsym = get_kernel_syms(NULL)) < 0) {
- error("get_kernel_syms: %m");
- return 0;
- }
- kernsym = k = xmalloc(nkernsym * sizeof(struct old_kernel_sym));
- old_kernsym = kernsym;
- if (get_kernel_syms(kernsym) != nkernsym) {
- error("inconsistency with get_kernel_syms -- is someone else "
- "playing with modules?");
- free(kernsym);
- return 0;
- }
-
- /* Number of modules */
- for (k = kernsym, nmod = 0, i = 0; i < nkernsym; ++i, ++k) {
- if (k->name[0] == '#') {
- if (k->name[1]) {
- ++nmod;
- i = strlen(k->name+1) + 1;
- module_name_list =
- xrealloc(module_name_list,
- l_module_name_list + i);
- strcpy(module_name_list+l_module_name_list, /* safe, xrealloc */
- k->name+1);
- l_module_name_list += i; /* NUL separated strings */
- }
- else
- break;
- }
- }
- module_stat = mod = module = xmalloc(nmod * sizeof(struct module_stat));
- memset(module, 0, nmod * sizeof(struct module_stat));
- n_module_stat = nmod;
-
- /*
- * Will we need kernel internal info?
- */
- if ((type & K_INFO) || (type & K_REFS)) {
- if ((kmem_fd = open("/dev/kmem", O_RDONLY)) < 0) {
- perror("ksyms: open /dev/kmem");
- return 0;
- }
- }
-
- /*
- * Collect the module information.
- */
- for (k = kernsym, nm = 0, i = 0; i < nkernsym; ++i, ++k) {
- if (k->name[0] == '#') {
- struct old_kernel_sym *p;
- struct old_module info;
-
- if (k->name[1] == '\0')
- break; /* kernel resident symbols follow */
- /* else normal module */
-
- module = mod++;
- ++nm;
- module->name = k->name + 1;
- module->modstruct = k->value;
-
- if ((type & K_INFO) || (type & K_REFS)) {
- long tmp;
- /*
- * k->value is the address of the
- * struct old_module
- * in the kernel (for use via /dev/kmem)
- */
- mscan(k->value, sizeof(info), &info);
- module->addr = info.addr;
- module->size = info.size * getpagesize();
-
- mscan(info.addr, sizeof(long), &tmp);
- module->flags = info.state &
- (OLD_MOD_RUNNING | OLD_MOD_DELETED);
- module->flags |= NEW_MOD_USED_ONCE; /* Cheat */
- if (tmp & OLD_MOD_AUTOCLEAN)
- module->flags |= NEW_MOD_AUTOCLEAN;
- if (tmp & OLD_MOD_VISITED)
- module->flags |= NEW_MOD_VISITED;
-
- module->usecount = tmp & ~(OLD_MOD_AUTOCLEAN | OLD_MOD_VISITED);
- }
-
- if ((type & K_REFS) && info.ref) {
- struct old_module_ref mr;
- int j;
- unsigned long ref = info.ref;
-
- do {
- mscan(ref, sizeof(struct old_module_ref), &mr);
- for (j = 0; j < nm -1; ++j) {
- if (mr.module == module_stat[j].modstruct) {
- module->nrefs += 1;
- module->refs = xrealloc(module->refs, module->nrefs * sizeof(struct module_stat **));
- module->refs[module->nrefs - 1] = module_stat + j;
- break;
- }
- }
- } while ((ref = mr.next) != 0);
- }
-
- if (!(type & K_SYMBOLS))
- continue;
- /*
- * Find out how many symbols this module has.
- */
- for (nms = 0, p = k+1; p->name[0] != '#'; ++p)
- ++nms;
- s = xmalloc(nms * sizeof(struct module_symbol));
- module->syms = s;
- module->nsyms = nms;
- } else if (type & K_SYMBOLS) { /* Want info about symbols */
- s->name = (unsigned long) k->name;
- s->value = k->value;
- ++s;
- }
- }
- if ((type & K_INFO) || (type & K_REFS)) {
- if (kmem_fd != -1)
- close(kmem_fd);
- }
-
- /*
- * Kernel resident symbols follows
- */
- if (type & K_SYMBOLS) { /* Want info about symbols */
- if (k->name[0] == '#')
- ++k;
- nksyms = nkernsym - (k - kernsym);
- if (nksyms) {
- ksyms = s = xmalloc(nksyms * sizeof(struct module_symbol));
- for (i = 0; i < nksyms; ++i, ++k) {
- if (k->name[0] != '#') {
- s->name = (unsigned long) k->name;
- s->value = k->value;
- ++s;
- }
- }
- nksyms = s - ksyms;
- } else
- ksyms = NULL;
- }
-
- return 1;
-}
-#endif /* COMPAT_2_0 */
-
-int get_kernel_info(int type)
-{
- k_new_syscalls = !query_module(NULL, 0, NULL, 0, NULL);
-
-#ifdef COMPAT_2_0
- if (!k_new_syscalls)
- return old_get_kernel_info(type);
-#endif /* COMPAT_2_0 */
-
- return new_get_kernel_info(type);
-}
diff --git a/mdk-stage1/insmod-modutils/util/snap_shot.c b/mdk-stage1/insmod-modutils/util/snap_shot.c
deleted file mode 100644
index ae0cc7c79..000000000
--- a/mdk-stage1/insmod-modutils/util/snap_shot.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* Take a snap shot of ksyms and modules for Oops debugging
- Copyright 1999 Linux International.
-
- Contributed by Keith Owens <kaos@ocs.com.au>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-#ident "$Id$"
-
-#include <errno.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <time.h>
-#include <unistd.h>
-#include <string.h>
-
-#include "module.h"
-#include "obj.h"
-#include "modstat.h"
-#include "util.h"
-
-static char snap_dir[] = "/var/log/ksymoops";
-
-/* If snap_dir exists, take a snap shot of ksyms and modules to snap_dir.
- * Prefix the files with the equivalent of
- * date +%Y%m%d%T%M%S | sed -e 's/://g'
- */
-void snap_shot(const char *module_names, int n_module_names)
-{
- char file[] = "ccyymmddhhmmss.modules", buffer[4096];
- static char *infile[] = { "/proc/ksyms", "/proc/modules" };
- static char *suffix[] = { "ksyms", "modules" };
- struct tm *local;
- time_t t;
- int i, l;
- FILE *in, *out;
-
- if (module_names) {
- /* Only snap shot if the list of modules has changed.
- * Otherwise auto cleanup takes a snap shot every time
- * and ends up with a large snap shot directory.
- */
- char *new_module_names;
- size_t n_new_module_names;
- get_kernel_info(0);
- new_module_names = module_name_list;
- n_new_module_names = n_module_stat;
- if (n_module_names && n_new_module_names == n_module_names) {
- while (n_module_names) {
- if (strcmp(module_names, new_module_names))
- break; /* difference detected */
- i = strlen(module_names) + 1;
- module_names += i;
- new_module_names += i;
- --n_module_names;
- }
- }
- if (!n_module_names)
- return; /* no difference, no need for snap shot */
- }
-
- if (chdir(snap_dir))
- return;
- t = time(NULL);
- local = localtime(&t);
- for (i = 0; i < sizeof(infile)/sizeof(infile[0]); ++i) {
- snprintf(file, sizeof(file), "%04d%02d%02d%02d%02d%02d.%s",
- local->tm_year+1900,
- local->tm_mon + 1,
- local->tm_mday,
- local->tm_hour,
- local->tm_min,
- local->tm_sec,
- suffix[i]);
- out = fopen(file, "w");
- if (!out) {
- error("cannot create %s/%s %m", snap_dir, file);
- return;
- }
- in = fopen(infile[i], "r");
- if (!in) {
- error("cannot open %s %m", infile[i]);
- return;
- }
- while ((l = fread(buffer, 1, sizeof(buffer), in)) > 0) {
- if (fwrite(buffer, l, 1, out) != 1) {
- error("unable to write to %s %m", file);
- fclose(in);
- fclose(out);
- return;
- }
- }
- if (ferror(in))
- error("unable to read from %s %m", infile[i]);
- fclose(in);
- fclose(out);
- }
-}
-
-/* If snap_dir exists, log a message to snap_dir. The log file is called the
- * equivalent of date +%Y%m%d | sed -e 's/://g'. Each line is prefixed with
- * timestamp down to seconds and followed by a newline.
- */
-void snap_shot_log(const char *fmt,...)
-{
- char date[] = "ccyymmdd", file[] = "ccyymmdd.log", stamp[] = "ccyymmdd hhmmss";
- struct tm *local;
- time_t t;
- FILE *log;
- va_list args;
- int save_errno = errno;
-
- if (chdir(snap_dir))
- return;
- t = time(NULL);
- local = localtime(&t);
- snprintf(date, sizeof(date), "%04d%02d%02d",
- local->tm_year+1900,
- local->tm_mon + 1,
- local->tm_mday);
- snprintf(file, sizeof(file), "%s.log", date);
- log = fopen(file, "a");
- if (!log) {
- error("cannot create %s/%s %m", snap_dir, file);
- return;
- }
- snprintf(stamp, sizeof(stamp), "%s %02d%02d%02d",
- date,
- local->tm_hour,
- local->tm_min,
- local->tm_sec);
- fprintf(log, "%s ", stamp);
- va_start(args, fmt);
- errno = save_errno; /* fmt may use %m */
- vfprintf(log, fmt, args);
- va_end(args);
- fprintf(log, "\n");
- fclose(log);
-}
diff --git a/mdk-stage1/insmod-modutils/util/sys_cm.c b/mdk-stage1/insmod-modutils/util/sys_cm.c
deleted file mode 100644
index 851fb709e..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_cm.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* Functions for the Linux module syscall interface.
- Copyright 1996, 1997 Linux International.
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
- _syscall* defined. */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-#if defined(__i386__) || defined(__m68k__) || defined(__arm__)
-
-#define __NR__create_module __NR_create_module
-static inline _syscall2(long, _create_module, const char *, name, size_t, size)
-
-unsigned long create_module(const char *name, size_t size)
-{
- /* Why all this fuss?
-
- In linux 2.1, the address returned by create module point in
- kernel space which is now mapped at the top of user space (at
- 0xc0000000 on i386). This looks like a negative number for a
- long. The normal syscall macro of linux 2.0 (and all libc compile
- with linux 2.0 or below) consider that the return value is a
- negative number and consider it is an error number (A kernel
- convention, return value are positive or negative, indicating the
- error number).
-
- By checking the value of errno, we know if we have been fooled by
- the syscall2 macro and we fix it. */
-
- long ret = _create_module(name, size);
- if (ret == -1 && errno > 125)
- {
- ret = -errno;
- errno = 0;
- }
- return ret;
-}
-
-#elif defined(__alpha__)
-
-/* Alpha doesn't have the same problem, exactly, but a bug in older
- kernels fails to clear the error flag. Clear it here explicitly. */
-
-#define __NR__create_module __NR_create_module
-static inline _syscall4(unsigned long, _create_module, const char *, name,
- size_t, size, size_t, dummy, size_t, err);
-
-unsigned long create_module(const char *name, size_t size)
-{
- return _create_module(name, size, 0, 0);
-}
-
-#else
-
-/* Sparc, MIPS, (and Alpha, but that's another problem) don't mistake
- return values for errors due to the nature of the system call. */
-
-_syscall2(unsigned long, create_module, const char *, name, size_t, size)
-
-#endif
diff --git a/mdk-stage1/insmod-modutils/util/sys_dm.c b/mdk-stage1/insmod-modutils/util/sys_dm.c
deleted file mode 100644
index a166a30f4..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_dm.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Functions for the Linux module syscall interface.
- Copyright 1996, 1997 Linux International.
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
- _syscall* defined. */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-_syscall1(int, delete_module, const char *, name)
diff --git a/mdk-stage1/insmod-modutils/util/sys_gks.c b/mdk-stage1/insmod-modutils/util/sys_gks.c
deleted file mode 100644
index f71772c71..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_gks.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Functions for the Linux module syscall interface.
- Copyright 1996, 1997 Linux International.
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
- _syscall* defined. */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-_syscall1(int, get_kernel_syms, struct old_kernel_sym *, ksyms)
diff --git a/mdk-stage1/insmod-modutils/util/sys_nim.c b/mdk-stage1/insmod-modutils/util/sys_nim.c
deleted file mode 100644
index bbe42135c..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_nim.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/* Functions for the Linux module syscall interface.
- Copyright 1996, 1997 Linux International.
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
- _syscall* defined. */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-#ifndef CONFIG_USE_SYSCALL
-
-extern int init_module(const char *name, const struct module *info);
-
-int
-sys_init_module(const char *name, const struct module *info)
-{
- return init_module(name, info);
-}
-
-#else
-
-#define __NR_sys_init_module __NR_init_module
-_syscall2(int, sys_init_module, const char *, name,
- const struct module *, info)
-
-#endif
diff --git a/mdk-stage1/insmod-modutils/util/sys_oim.c b/mdk-stage1/insmod-modutils/util/sys_oim.c
deleted file mode 100644
index 73ac6be52..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_oim.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Functions for the Linux module syscall interface.
- Copyright 1996, 1997 Linux International.
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
- _syscall* defined. */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-#define __NR_old_sys_init_module __NR_init_module
-_syscall5(int, old_sys_init_module, const char *, name, char *, code,
- unsigned, codesize, struct old_mod_routines *, routines,
- struct old_symbol_table *, symtab)
diff --git a/mdk-stage1/insmod-modutils/util/sys_qm.c b/mdk-stage1/insmod-modutils/util/sys_qm.c
deleted file mode 100644
index 119a219a2..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_qm.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/* Functions for the Linux module syscall interface.
- Copyright 1996, 1997 Linux International.
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
- _syscall* defined. */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-/* I am fucking tired of the "this doesn't build on 2.0.x" questions.
- But if you ask, we still officially require 2.1.x to build. */
-#if !defined(__NR_query_module)
-# if defined(__i386__)
-# define __NR_query_module 167
-# elif defined(__alpha__)
-# define __NR_query_module 347
-# elif defined(__sparc__)
-# define __NR_query_module 184
-# elif defined(__mc68000__)
-# define __NR_query_module 167
-# elif defined(__arm__)
-# define __NR_query_module (__NR_SYSCALL_BASE + 167)
-# elif defined(__mips__)
-# define __NR_query_module 4187
-# endif
-#endif
-
-_syscall5(int, query_module, const char *, name, int, which,
- void *, buf, size_t, bufsize, size_t *, ret);
diff --git a/mdk-stage1/insmod-modutils/util/xftw.c b/mdk-stage1/insmod-modutils/util/xftw.c
deleted file mode 100644
index fe764a63c..000000000
--- a/mdk-stage1/insmod-modutils/util/xftw.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * modutils specific implementation of ftw().
- *
- * Copyright 2000:
- * Keith Owens <kaos@ocs.com.au> August 2000
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- modutils requires special processing during the file tree walk
- of /lib/modules/<version> and any paths that the user specifies.
- The standard ftw() does a blind walk of all paths and can end
- up following the build symlink down the kernel source tree.
- Although nftw() has the option to get more control such as not
- automatically following symbolic links, even that is not enough
- for modutils. The requirements are:
-
- Paths must be directories or symlinks to directories.
-
- Each directory is read and sorted into alphabetical order
- before processing.
-
- A directory is type 1 iff it was specified on a path statement
- (either explicit or default) and the directory contains a
- subdirectory with one of the known names and the directory name
- does not end with "/kernel". Otherwise it is type 2.
-
- In a type 1 directory, walk the kernel subdirectory if it exists,
- then the old known names in their historical order then any
- remaining directory entries in alphabetical order and finally any
- non-directory entries in alphabetical order.
-
- Entries in a type 1 directory are filtered against the "prune"
- list. A type 1 directory can contain additional files which
- are not modules nor symlinks to modules. The prune list skips
- known additional files, if a distribution wants to store
- additional text files in the top level directory they should be
- added to the prune list.
-
- A type 2 directory must contain only modules or symlinks to
- modules. They are processed in alphabetical order, without
- pruning. Symlinks to directories are an error in type 2
- directories.
-
- The user function is not called for type 1 directories, nor for
- pruned entries. It is called for type 2 directories and their
- contents. It is also called for any files left in a type 1
- directory after pruning and processing type 2 subdirectories.
- The user function never sees symlinks, they are resolved before
- calling the function.
-
- Why have different directory types? The original file tree
- walk was not well defined. Some users specified each directory
- individually, others just pointed at the top level directory.
- Either version worked until the "build" symlink was added. Now
- users who specify the top level directory end up running the
- entire kernel source tree looking for modules, not nice. We
- cannot just ignore symlinks because pcmcia uses symlinks to
- modules for backwards compatibility.
-
- Type 1 is when a user specifies the top level directory which needs
- special processing, type 2 is individual subdirectories. But the
- only way to tell the difference is by looking at the contents. The
- "/kernel" directory introduced in 2.3.12 either contains nothing
- (old make modules_install) or contains all the kernel modules using
- the same tree structure as the source. Because "/kernel" can
- contain old names but is really a type 2 directory, it is detected
- as a special case.
- */
-
-#include <dirent.h>
-#include <errno.h>
-#include <limits.h>
-#include <malloc.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-
-#include "util.h"
-#include "config.h"
-
-extern char *tbpath[];
-
-extern OPT_LIST *prune_list;
-extern int n_prune_list;
-
-extern char *tbtype[];
-
-struct xftw_dirent {
- struct stat statbuf;
- char *name;
- char *fullname;
-};
-
-#define XFTW_MAXDEPTH 64 /* Maximum directory depth handled */
-
-typedef struct {
- struct xftw_dirent *contents;
- int size;
- int used;
-} xftw_tree_t;
-
-static xftw_tree_t tree[XFTW_MAXDEPTH];
-
-/* Free all data for one tree level */
-static void xftw_free_tree(int depth)
-{
- int i;
- xftw_tree_t *t = tree+depth;
- for (i = 0; i < t->size; ++i) {
- free(t->contents[i].name);
- free(t->contents[i].fullname);
- }
- free(t->contents);
- t->contents = NULL;
- t->size = 0;
- t->used = 0;
-}
-
-/* Increment dirents used at this depth, resizing if necessary */
-static void xftw_add_dirent(int depth)
-{
- xftw_tree_t *t = tree+depth;
- int i, size = t->size;
- if (++t->used < size)
- return;
- size += 10; /* arbitrary increment */
- t->contents = xrealloc(t->contents, size*sizeof(*(t->contents)));
- for (i = t->size; i < size; ++i) {
- memset(&(t->contents[i].statbuf), 0, sizeof(t->contents[i].statbuf));
- t->contents[i].name = NULL;
- t->contents[i].fullname = NULL;
- }
- t->size = size;
-}
-
-/* Concatenate directory name and entry name into one string.
- * Note: caller must free result or leak.
- */
-static char *xftw_dir_name(const char *directory, const char *entry)
-{
- int i = strlen(directory);
- char *name;
- if (entry)
- i += strlen(entry);
- i += 2;
- name = xmalloc(i);
- strcpy(name, directory); /* safe, xmalloc */
- if (*directory && entry)
- strcat(name, "/"); /* safe, xmalloc */
- if (entry)
- strcat(name, entry); /* safe, xmalloc */
- return(name);
-}
-
-/* Call the user function for a directory entry */
-static int xftw_do_name(const char *directory, const char *entry, struct stat *sb, xftw_func_t funcptr)
-{
- int ret = 0;
- char *name = xftw_dir_name(directory, entry);
-
- if (S_ISLNK(sb->st_mode)) {
- char real[PATH_MAX], *newname;
- verbose("resolving %s symlink to ", name);
- if (!(newname = realpath(name, real))) {
- if (errno == ENOENT) {
- verbose("%s: does not exist, dangling symlink ignored\n", real);
- goto cleanup;
- }
- perror("... failed");
- goto cleanup;
- }
- verbose("%s ", newname);
- if (lstat(newname, sb)) {
- error("lstat on %s failed ", newname);
- perror("");
- goto cleanup;
- }
- free(name);
- name = xstrdup(newname);
- }
-
- if (!S_ISREG(sb->st_mode) &&
- !S_ISDIR(sb->st_mode)) {
- error("%s is not plain file nor directory\n", name);
- goto cleanup;
- }
-
- verbose("user function %s\n", name);
- ret = (*funcptr)(name, sb);
-cleanup:
- free(name);
- return(ret);
-}
-
-/* Sort directory entries into alphabetical order */
-static int xftw_sortdir(const void *a, const void *b)
-{
- return(strcmp(((struct xftw_dirent *)a)->name, ((struct xftw_dirent *)b)->name));
-}
-
-/* Read a directory and sort it, ignoring "." and ".." */
-static int xftw_readdir(const char *directory, int depth)
-{
- DIR *d;
- struct dirent *ent;
- verbose("xftw_readdir %s\n", directory);
- if (!(d = opendir(directory))) {
- perror(directory);
- return(1);
- }
- while ((ent = readdir(d))) {
- char *name;
- struct xftw_dirent *f;
- if (strcmp(ent->d_name, ".") == 0 ||
- strcmp(ent->d_name, "..") == 0)
- continue;
- name = xftw_dir_name(directory, ent->d_name);
- xftw_add_dirent(depth);
- f = tree[depth].contents+tree[depth].used-1;
- f->name = xstrdup(ent->d_name);
- f->fullname = name; /* do not free name, it is in use */
- if (lstat(name, &(f->statbuf))) {
- perror(name);
- return(1);
- }
- }
- closedir(d);
- qsort(tree[depth].contents, tree[depth].used, sizeof(*(tree[0].contents)), &xftw_sortdir);
- return(0);
-}
-
-/* Process a type 2 directory */
-int xftw_type2(const char *directory, const char *entry, int depth, xftw_func_t funcptr)
-{
- int ret, i;
- xftw_tree_t *t = tree+depth;
- struct stat statbuf;
- char *dirname = xftw_dir_name(directory, entry);
-
- verbose("type 2 %s\n", dirname);
- if (depth > XFTW_MAXDEPTH) {
- error("xftw_type2 exceeded maxdepth\n");
- ret = 1;
- goto cleanup;
- }
- if ((ret = xftw_readdir(dirname, depth)))
- goto cleanup;
-
- t = tree+depth;
- /* user function sees type 2 directories */
- if ((ret = lstat(dirname, &statbuf)) ||
- (ret = xftw_do_name("", dirname, &statbuf, funcptr)))
- goto cleanup;
-
- /* user sees all contents of type 2 directory, no pruning */
- for (i = 0; i < t->used; ++i) {
- struct xftw_dirent *c = t->contents+i;
- if (S_ISLNK(c->statbuf.st_mode)) {
- if (!stat(c->name, &(c->statbuf))) {
- if (S_ISDIR(c->statbuf.st_mode)) {
- error("symlink to directory is not allowed, %s ignored\n", c->name);
- *(c->name) = '\0'; /* ignore it */
- }
- }
- }
- if (!*(c->name))
- continue;
- if (S_ISDIR(c->statbuf.st_mode)) {
- /* recursion is the curse of the programming classes */
- ret = xftw_type2(dirname, c->name, depth+1, funcptr);
- if (ret)
- goto cleanup;
- }
- else if ((ret = xftw_do_name(dirname, c->name, &(c->statbuf), funcptr)))
- goto cleanup;
- *(c->name) = '\0'; /* processed */
- }
-
- ret = 0;
-cleanup:
- free(dirname);
- return(ret);
-}
-
-/* Only external visible function. Decide on the type of directory and
- * process accordingly.
- */
-int xftw(const char *directory, xftw_func_t funcptr)
-{
- struct stat statbuf;
- int ret, i, j, type;
- xftw_tree_t *t;
- struct xftw_dirent *c;
-
- verbose("xftw starting at %s ", directory);
- if (lstat(directory, &statbuf)) {
- verbose("lstat on %s failed\n", directory);
- return(0);
- }
- if (S_ISLNK(statbuf.st_mode)) {
- char real[PATH_MAX];
- verbose("resolving symlink to ");
- if (!(directory = realpath(directory, real))) {
- if (errno == ENOENT) {
- verbose("%s: does not exist, dangling symlink ignored\n", real);
- return(0);
- }
- perror("... failed");
- return(-1);
- }
- verbose("%s ", directory);
- if (lstat(directory, &statbuf)) {
- error("lstat on %s failed ", directory);
- perror("");
- return(-1);
- }
- }
- if (!S_ISDIR(statbuf.st_mode)) {
- error("%s is not a directory\n", directory);
- return(-1);
- }
- verbose("\n");
-
- /* All returns after this point must be via cleanup */
-
- if ((ret = xftw_readdir(directory, 0)))
- goto cleanup;
-
- t = tree; /* depth 0 */
- type = 2;
- for (i = 0 ; type == 2 && i < t->used; ++i) {
- c = t->contents+i;
- for (j = 0; tbtype[j]; ++j) {
- if (strcmp(c->name, tbtype[j]) == 0 &&
- S_ISDIR(c->statbuf.st_mode)) {
- const char *p = directory + strlen(directory) - 1;
- if (*p == '/')
- --p;
- if (p - directory >= 6 && strncmp(p-6, "/kernel", 7) == 0)
- continue; /* "/kernel" path is a special case, type 2 */
- type = 1; /* known subdirectory */
- break;
- }
- }
- }
-
- if (type == 1) {
- OPT_LIST *p;
- /* prune entries in type 1 directories only */
- for (i = 0 ; i < t->used; ++i) {
- for (p = prunelist; p->name; ++p) {
- c = t->contents+i;
- if (strcmp(p->name, c->name) == 0) {
- verbose("pruned %s\n", c->name);
- *(c->name) = '\0'; /* ignore */
- }
- }
- }
- /* run known subdirectories first in historical order, "kernel" is now top of list */
- for (i = 0 ; i < t->used; ++i) {
- c = t->contents+i;
- for (j = 0; tbtype[j]; ++j) {
- if (*(c->name) &&
- strcmp(c->name, tbtype[j]) == 0 &&
- S_ISDIR(c->statbuf.st_mode)) {
- if ((ret = xftw_type2(directory, c->name, 1, funcptr)))
- goto cleanup;
- *(c->name) = '\0'; /* processed */
- }
- }
- }
- /* any other directories left, in alphabetical order */
- for (i = 0 ; i < t->used; ++i) {
- c = t->contents+i;
- if (*(c->name) &&
- S_ISDIR(c->statbuf.st_mode)) {
- if ((ret = xftw_type2(directory, c->name, 1, funcptr)))
- goto cleanup;
- *(c->name) = '\0'; /* processed */
- }
- }
- /* anything else is passed to the user function */
- for (i = 0 ; i < t->used; ++i) {
- c = t->contents+i;
- if (*(c->name)) {
- verbose("%s found in type 1 directory %s\n", c->name, directory);
- if ((ret = xftw_do_name(directory, c->name, &(c->statbuf), funcptr)))
- goto cleanup;
- *(c->name) = '\0'; /* processed */
- }
- }
- }
- else {
- /* type 2 */
- xftw_free_tree(0);
- if ((ret = xftw_type2(directory, NULL, 0, funcptr)))
- goto cleanup;
- }
-
- /* amazing, it all worked */
- ret = 0;
-cleanup:
- for (i = 0; i < XFTW_MAXDEPTH; ++i)
- xftw_free_tree(i);
- return(ret);
-}
diff --git a/mdk-stage1/insmod-modutils/util/xmalloc.c b/mdk-stage1/insmod-modutils/util/xmalloc.c
deleted file mode 100644
index 9113d47fe..000000000
--- a/mdk-stage1/insmod-modutils/util/xmalloc.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Misc utility functions.
- Copyright 1996, 1997 Linux International.
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-void *
-xmalloc(size_t size)
-{
- void *ptr = malloc(size);
- if (!ptr)
- {
- error("Out of memory");
- exit(1);
- }
- return ptr;
-}
diff --git a/mdk-stage1/insmod-modutils/util/xrealloc.c b/mdk-stage1/insmod-modutils/util/xrealloc.c
deleted file mode 100644
index d287486f7..000000000
--- a/mdk-stage1/insmod-modutils/util/xrealloc.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Misc utility functions.
- Copyright 1996, 1997 Linux International.
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-void *
-xrealloc(void *old, size_t size)
-{
- void *ptr = realloc(old, size);
- if (!ptr)
- {
- error("Out of memory");
- exit(1);
- }
- return ptr;
-}
diff --git a/mdk-stage1/insmod-modutils/util/xstrcat.c b/mdk-stage1/insmod-modutils/util/xstrcat.c
deleted file mode 100644
index abb075c83..000000000
--- a/mdk-stage1/insmod-modutils/util/xstrcat.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Misc utility functions.
- Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id"
-
-#include <stdlib.h>
-#include <string.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-char *
-xstrcat(char *dest, const char *src, size_t size)
-{
- int ldest = strlen(dest);
- int lsrc = strlen(src);
- if ((size - ldest - 1) < lsrc) {
- error("xstrcat: destination overflow");
- exit(1);
- }
- memcpy(dest+ldest, src, lsrc+1);
- return(dest);
-}
diff --git a/mdk-stage1/insmod-modutils/util/xstrdup.c b/mdk-stage1/insmod-modutils/util/xstrdup.c
deleted file mode 100644
index 11b289eb0..000000000
--- a/mdk-stage1/insmod-modutils/util/xstrdup.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/* Misc utility functions.
- Copyright 1996, 1997 Linux International.
- Contributed by Richard Henderson <rth@tamu.edu>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id$"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-char *
-xstrdup(const char *s)
-{
- char *n = strdup(s);
- if (!n)
- {
- error("Out of memory");
- exit(1);
- }
- return n;
-}
diff --git a/mdk-stage1/insmod-modutils/util/xsystem.c b/mdk-stage1/insmod-modutils/util/xsystem.c
deleted file mode 100644
index edb995268..000000000
--- a/mdk-stage1/insmod-modutils/util/xsystem.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Misc utility functions.
- Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
- This file is part of the Linux modutils.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ident "$Id"
-
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <errno.h>
-#include <unistd.h>
-
-
-/*======================================================================*/
-
-/* Clone of the system() function From Steven's Advanced Programming in a Unix
- * Environment. Modified to use *argv[] and execvp to avoid shell expansion
- * problems, modutils runs as root so system() is unsafe.
- */
-
-int
-xsystem(const char *file, char *const argv[])
-{
- pid_t pid;
- int status;
- if ((pid = fork()) < 0)
- return(-1);
- if (pid == 0) {
- execvp(file, argv);
- _exit(127);
- }
- while (waitpid(pid, &status, 0) < 0) {
- if (errno != EINTR)
- return(-1);
- }
- return(status);
-}
diff --git a/mdk-stage1/insmod.h b/mdk-stage1/insmod.h
deleted file mode 100644
index d91f239cf..000000000
--- a/mdk-stage1/insmod.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _INSMOD_INTERFACE_H_
-#define _INSMOD_INTERFACE_H_
-
-int insmod_call(char * full_filename, char * params);
-
-#endif
diff --git a/mdk-stage1/linux-2.2/nfs.h b/mdk-stage1/linux-2.2/nfs.h
deleted file mode 100644
index 7936d5a71..000000000
--- a/mdk-stage1/linux-2.2/nfs.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * NFS protocol definitions
- */
-#ifndef _LINUX_NFS_H
-#define _LINUX_NFS_H
-
-#include <linux/sunrpc/msg_prot.h>
-
-#define NFS_PORT 2049
-#define NFS_MAXDATA 8192
-#define NFS_MAXPATHLEN 1024
-#define NFS_MAXNAMLEN 255
-#define NFS_MAXGROUPS 16
-#define NFS_FHSIZE 32
-#define NFS_COOKIESIZE 4
-#define NFS_FIFO_DEV (-1)
-#define NFSMODE_FMT 0170000
-#define NFSMODE_DIR 0040000
-#define NFSMODE_CHR 0020000
-#define NFSMODE_BLK 0060000
-#define NFSMODE_REG 0100000
-#define NFSMODE_LNK 0120000
-#define NFSMODE_SOCK 0140000
-#define NFSMODE_FIFO 0010000
-
-
-enum nfs_stat {
- NFS_OK = 0,
- NFSERR_PERM = 1,
- NFSERR_NOENT = 2,
- NFSERR_IO = 5,
- NFSERR_NXIO = 6,
- NFSERR_EAGAIN = 11,
- NFSERR_ACCES = 13,
- NFSERR_EXIST = 17,
- NFSERR_XDEV = 18,
- NFSERR_NODEV = 19,
- NFSERR_NOTDIR = 20,
- NFSERR_ISDIR = 21,
- NFSERR_INVAL = 22, /* that Sun forgot */
- NFSERR_FBIG = 27,
- NFSERR_NOSPC = 28,
- NFSERR_ROFS = 30,
- NFSERR_OPNOTSUPP = 45,
- NFSERR_NAMETOOLONG = 63,
- NFSERR_NOTEMPTY = 66,
- NFSERR_DQUOT = 69,
- NFSERR_STALE = 70,
- NFSERR_WFLUSH = 99
-};
-
-enum nfs_ftype {
- NFNON = 0,
- NFREG = 1,
- NFDIR = 2,
- NFBLK = 3,
- NFCHR = 4,
- NFLNK = 5,
- NFSOCK = 6,
- NFBAD = 7,
- NFFIFO = 8
-};
-
-struct nfs_fh {
- char data[NFS_FHSIZE];
-};
-
-#define NFS_PROGRAM 100003
-#define NFS_VERSION 2
-#define NFSPROC_NULL 0
-#define NFSPROC_GETATTR 1
-#define NFSPROC_SETATTR 2
-#define NFSPROC_ROOT 3
-#define NFSPROC_LOOKUP 4
-#define NFSPROC_READLINK 5
-#define NFSPROC_READ 6
-#define NFSPROC_WRITECACHE 7
-#define NFSPROC_WRITE 8
-#define NFSPROC_CREATE 9
-#define NFSPROC_REMOVE 10
-#define NFSPROC_RENAME 11
-#define NFSPROC_LINK 12
-#define NFSPROC_SYMLINK 13
-#define NFSPROC_MKDIR 14
-#define NFSPROC_RMDIR 15
-#define NFSPROC_READDIR 16
-#define NFSPROC_STATFS 17
-
-/* Mount support for NFSroot */
-#ifdef __KERNEL__
-#define NFS_MNT_PROGRAM 100005
-#define NFS_MNT_VERSION 1
-#define NFS_MNT_PORT 627
-#define NFS_MNTPROC_MNT 1
-#define NFS_MNTPROC_UMNT 3
-#endif
-
-#if defined(__KERNEL__) || defined(NFS_NEED_KERNEL_TYPES)
-
-extern struct rpc_program nfs_program;
-extern struct rpc_stat nfs_rpcstat;
-
-struct nfs_time {
- __u32 seconds;
- __u32 useconds;
-};
-
-struct nfs_fattr {
- enum nfs_ftype type;
- __u32 mode;
- __u32 nlink;
- __u32 uid;
- __u32 gid;
- __u32 size;
- __u32 blocksize;
- __u32 rdev;
- __u32 blocks;
- __u32 fsid;
- __u32 fileid;
- struct nfs_time atime;
- struct nfs_time mtime;
- struct nfs_time ctime;
-};
-
-struct nfs_sattr {
- __u32 mode;
- __u32 uid;
- __u32 gid;
- __u32 size;
- struct nfs_time atime;
- struct nfs_time mtime;
-};
-
-struct nfs_fsinfo {
- __u32 tsize;
- __u32 bsize;
- __u32 blocks;
- __u32 bfree;
- __u32 bavail;
-};
-
-struct nfs_writeargs {
- struct nfs_fh * fh;
- __u32 offset;
- __u32 count;
- const void * buffer;
-};
-
-#ifdef NFS_NEED_XDR_TYPES
-
-struct nfs_sattrargs {
- struct nfs_fh * fh;
- struct nfs_sattr * sattr;
-};
-
-struct nfs_diropargs {
- struct nfs_fh * fh;
- const char * name;
-};
-
-struct nfs_readargs {
- struct nfs_fh * fh;
- __u32 offset;
- __u32 count;
- void * buffer;
-};
-
-struct nfs_createargs {
- struct nfs_fh * fh;
- const char * name;
- struct nfs_sattr * sattr;
-};
-
-struct nfs_renameargs {
- struct nfs_fh * fromfh;
- const char * fromname;
- struct nfs_fh * tofh;
- const char * toname;
-};
-
-struct nfs_linkargs {
- struct nfs_fh * fromfh;
- struct nfs_fh * tofh;
- const char * toname;
-};
-
-struct nfs_symlinkargs {
- struct nfs_fh * fromfh;
- const char * fromname;
- const char * topath;
- struct nfs_sattr * sattr;
-};
-
-struct nfs_readdirargs {
- struct nfs_fh * fh;
- __u32 cookie;
- void * buffer;
- unsigned int bufsiz;
-};
-
-struct nfs_diropok {
- struct nfs_fh * fh;
- struct nfs_fattr * fattr;
-};
-
-struct nfs_readres {
- struct nfs_fattr * fattr;
- unsigned int count;
-};
-
-struct nfs_readlinkres {
- char ** string;
- unsigned int * lenp;
- unsigned int maxlen;
- void * buffer;
-};
-
-struct nfs_readdirres {
- void * buffer;
- unsigned int bufsiz;
-};
-
-#endif /* NFS_NEED_XDR_TYPES */
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/mdk-stage1/linux-2.2/nfs_mount.h b/mdk-stage1/linux-2.2/nfs_mount.h
deleted file mode 100644
index 60493b150..000000000
--- a/mdk-stage1/linux-2.2/nfs_mount.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _LINUX_NFS_MOUNT_H
-#define _LINUX_NFS_MOUNT_H
-
-/*
- * linux/include/linux/nfs_mount.h
- *
- * Copyright (C) 1992 Rick Sladkey
- *
- * structure passed from user-space to kernel-space during an nfs mount
- */
-
-/*
- * WARNING! Do not delete or change the order of these fields. If
- * a new field is required then add it to the end. The version field
- * tracks which fields are present. This will ensure some measure of
- * mount-to-kernel version compatibility. Some of these aren't used yet
- * but here they are anyway.
- */
-#define NFS_MOUNT_VERSION 3
-
-struct nfs_mount_data {
- int version; /* 1 */
- int fd; /* 1 */
- struct nfs_fh root; /* 1 */
- int flags; /* 1 */
- int rsize; /* 1 */
- int wsize; /* 1 */
- int timeo; /* 1 */
- int retrans; /* 1 */
- int acregmin; /* 1 */
- int acregmax; /* 1 */
- int acdirmin; /* 1 */
- int acdirmax; /* 1 */
- struct sockaddr_in addr; /* 1 */
- char hostname[256]; /* 1 */
- int namlen; /* 2 */
- unsigned int bsize; /* 3 */
-};
-
-/* bits in the flags field */
-
-#define NFS_MOUNT_SOFT 0x0001 /* 1 */
-#define NFS_MOUNT_INTR 0x0002 /* 1 */
-#define NFS_MOUNT_SECURE 0x0004 /* 1 */
-#define NFS_MOUNT_POSIX 0x0008 /* 1 */
-#define NFS_MOUNT_NOCTO 0x0010 /* 1 */
-#define NFS_MOUNT_NOAC 0x0020 /* 1 */
-#define NFS_MOUNT_TCP 0x0040 /* 2 */
-#define NFS_MOUNT_VER3 0x0080 /* 3 */
-#define NFS_MOUNT_KERBEROS 0x0100 /* 3 */
-#define NFS_MOUNT_NONLM 0x0200 /* 3 */
-
-#endif
diff --git a/mdk-stage1/log.c b/mdk-stage1/log.c
deleted file mode 100644
index 319079fd7..000000000
--- a/mdk-stage1/log.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <string.h>
-#include <time.h>
-#include <errno.h>
-#include "stage1.h"
-
-#include "log.h"
-
-static FILE * logtty = NULL;
-static FILE * logfile = NULL;
-
-
-void vlog_message(const char * s, va_list args)
-{
- if (logfile) {
- fprintf(logfile, "* ");
- vfprintf(logfile, s, args);
- fprintf(logfile, "\n");
- fflush(logfile);
- }
- if (logtty) {
- fprintf(logtty, "* ");
- vfprintf(logtty, s, args);
- fprintf(logtty, "\n");
- fflush(logtty);
- }
-}
-
-
-void log_message(const char * s, ...)
-{
- va_list args;
- va_start(args, s);
- vlog_message(s, args);
- va_end(args);
-
- return;
-}
-
-void log_perror(char *msg)
-{
- log_message("%s: %s", msg, strerror(errno));
-}
-
-
-void open_log(void)
-{
- if (!IS_TESTING) {
- logtty = fopen("/dev/tty3", "w");
- logfile = fopen("/tmp/stage1.log", "w");
- }
- else
- logfile = fopen("debug.log", "w");
-}
-
-void close_log(void)
-{
- if (logfile) {
- log_message("stage1: disconnecting life support systems");
- fclose(logfile);
- if (logtty)
- fclose(logtty);
- }
-}
diff --git a/mdk-stage1/log.h b/mdk-stage1/log.h
deleted file mode 100644
index 90aa3f6e6..000000000
--- a/mdk-stage1/log.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-
-#ifndef _LOG_H_
-#define _LOG_H_
-
-#include <stdarg.h>
-
-void log_message(const char * s, ...) __attribute__ ((format (printf, 1, 2)));
-void vlog_message(const char * s, va_list args);
-void log_perror(char *msg);
-void open_log(void);
-void close_log(void);
-
-#endif
diff --git a/mdk-stage1/lomount.c b/mdk-stage1/lomount.c
deleted file mode 100644
index 991a862c7..000000000
--- a/mdk-stage1/lomount.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* This code comes from util-linux-2.10n (mount/lomount.c)
- * (this is a simplified version of this code)
- */
-
-#include <sys/types.h>
-#include <sys/mount.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "stage1.h"
-#include "frontend.h"
-#include "log.h"
-#include "mount.h"
-#include "modules.h"
-
-#include "lomount.h"
-
-
-#define LO_NAME_SIZE 64
-#define LO_KEY_SIZE 32
-
-struct loop_info
-{
- int lo_number; /* ioctl r/o */
- dev_t lo_device; /* ioctl r/o */
- unsigned long lo_inode; /* ioctl r/o */
- dev_t lo_rdevice; /* ioctl r/o */
- int lo_offset;
- int lo_encrypt_type;
- int lo_encrypt_key_size; /* ioctl w/o */
- int lo_flags; /* ioctl r/o */
- char lo_name[LO_NAME_SIZE];
- unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
- unsigned long lo_init[2];
- char reserved[4];
-};
-
-#define LOOP_SET_FD 0x4C00
-#define LOOP_CLR_FD 0x4C01
-#define LOOP_SET_STATUS 0x4C02
-#define LOOP_GET_STATUS 0x4C03
-
-int
-set_loop (const char *device, const char *file)
-{
- struct loop_info loopinfo;
- int fd, ffd, mode;
-
- mode = O_RDONLY;
-
- if ((ffd = open (file, mode)) < 0)
- return 1;
-
- if ((fd = open (device, mode)) < 0) {
- close(ffd);
- return 1;
- }
-
- memset(&loopinfo, 0, sizeof (loopinfo));
- strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
- loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
- loopinfo.lo_offset = 0;
-
-#ifdef MCL_FUTURE
- /*
- * Oh-oh, sensitive data coming up. Better lock into memory to prevent
- * passwd etc being swapped out and left somewhere on disk.
- */
-
- if(mlockall(MCL_CURRENT|MCL_FUTURE)) {
- log_message("CRITICAL Couldn't lock into memory! %s (memlock)", strerror(errno));
- return 1;
- }
-#endif
-
- if (ioctl(fd, LOOP_SET_FD, ffd) < 0) {
- close(fd);
- close(ffd);
- return 1;
- }
-
- if (ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
- (void) ioctl (fd, LOOP_CLR_FD, 0);
- close(fd);
- close(ffd);
- return 1;
- }
-
- close(fd);
- close(ffd);
- return 0;
-}
-
-
-char * loopdev = "/dev/loop3"; /* Ugly. But do I care? */
-
-void
-del_loop(void)
-{
- int fd;
-
- if ((fd = open (loopdev, O_RDONLY)) < 0)
- return;
-
- if (ioctl (fd, LOOP_CLR_FD, 0) < 0)
- return;
-
- close (fd);
-}
-
-
-static char * where_mounted = NULL;
-
-int
-lomount(char *loopfile, char *where)
-{
-
- long int flag;
-
- flag = MS_MGC_VAL;
- flag |= MS_RDONLY;
-
- my_insmod("loop", ANY_DRIVER_TYPE, NULL);
-
- if (set_loop(loopdev, loopfile)) {
- log_message("set_loop failed on %s (%s)", loopdev, strerror(errno));
- return 1;
- }
-
- if (my_mount(loopdev, where, "iso9660", 0)) {
- del_loop();
- return 1;
- }
-
- where_mounted = strdup(where);
- log_message("lomount succeeded for %s on %s", loopfile, where);
- return 0;
-}
-
-
-int
-loumount()
-{
- if (where_mounted) {
- umount(where_mounted);
- where_mounted = NULL;
- }
- del_loop();
- return 0;
-}
-
-
diff --git a/mdk-stage1/lomount.h b/mdk-stage1/lomount.h
deleted file mode 100644
index 3b8a30ac1..000000000
--- a/mdk-stage1/lomount.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef LOMOUNT_H
-#define LOMOUNT_H
-
-int lomount(char *loopfile, char *where);
-int loumount(void);
-
-#endif
diff --git a/mdk-stage1/mar/.cvsignore b/mdk-stage1/mar/.cvsignore
deleted file mode 100644
index bfde37886..000000000
--- a/mdk-stage1/mar/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-mar
diff --git a/mdk-stage1/mar/Makefile b/mdk-stage1/mar/Makefile
deleted file mode 100644
index 801785947..000000000
--- a/mdk-stage1/mar/Makefile
+++ /dev/null
@@ -1,61 +0,0 @@
- #******************************************************************************
- #
- # mar - The Mandrake Archiver
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-TARGETS = libmar.a mar
-
-
-ifeq (DIETLIBC, $(L))
-TARGETS += libmar-DIET.a
-endif
-
-
-all: $(TARGETS)
-
-clean:
- rm -f *.o libmar.a libmar-DIET.a mar
-
-
-mar: mar-frontend.o mar-extract-only-standalone.o
- gcc -o mar mar-frontend.o mar-extract-only-standalone.o -lbz2
- $(STRIPCMD) $@
-
-libmar.a: mar-extract-only.o
- ar -cru $@ $^
- ranlib $@
-
-libmar-DIET.a: mar-extract-only-DIET.o
- ar -cru $@ $^
- ranlib $@
-
-mar-extract-only.o: mar-extract-only.c mar-extract-only.h mar.h
- gcc $(CFLAGS) $(GLIBC_INCLUDES) -c mar-extract-only.c
-
-mar-extract-only-DIET.o: mar-extract-only.c mar-extract-only.h mar.h
- gcc $(CFLAGS) $(DIETLIBC_INCLUDES) -o $@ -c mar-extract-only.c
-
-mar-frontend.o: mar-frontend.c mar.h mar-extract-only.h
- gcc $(CFLAGS) $(GLIBC_INCLUDES) -c mar-frontend.c
-
-mar-extract-only-standalone.o: mar-extract-only.c mar-extract-only.h mar.h
- gcc $(CFLAGS) $(GLIBC_INCLUDES) -o $@ -D_STANDALONE_ -c mar-extract-only.c
diff --git a/mdk-stage1/mar/mar-extract-only.c b/mdk-stage1/mar/mar-extract-only.c
deleted file mode 100644
index a5b6ccd2f..000000000
--- a/mdk-stage1/mar/mar-extract-only.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through zlib).
- *
- */
-
-/*
- * This code should suffice for stage1 on-the-fly uncompression of kernel modules.
- * (and it DOES perform tests and return values, blaaaah..)
- */
-
-#include "mar-extract-only.h"
-#include "mar.h"
-
-#ifdef _STANDALONE_
-void
-zerr(BZFILE * f) /* decrease code size */
-{
- fprintf(stderr, BZ2_bzerror(f, &z_errnum));
-}
-
-inline void
-log_perror(char *msg)
-{
- perror(msg);
-}
-void
-log_message(char *msg)
-{
- fprintf(stderr, msg);
-}
-#else /* _STANDALONE_ */
-#include "../log.h"
-void
-zerr(BZFILE * f) /* decrease code size */
-{
- log_message(BZ2_bzerror(f, &z_errnum));
-}
-#endif /* _STANDALONE_ */
-
-
-static int
-mar_open_file(char *filename, struct mar_stream *s)
-{
- int end_filetable = 0;
- struct mar_element * previous_element = NULL;
-
- /* mar_zfile */
- s->mar_zfile = BZ2_bzopen(filename, "rb");
- if (!s->mar_zfile)
- {
- log_perror(filename);
- return -1;
- }
-
- while (end_filetable == 0)
- {
- char buf[512];
- int ptr = 0;
- /* read filename */
- do
- {
- if (BZ2_bzread(s->mar_zfile, &(buf[ptr]), sizeof(char)) != sizeof(char))
- {
- zerr(s->mar_zfile);
- return -1;
- }
- ptr++;
- } while ((buf[ptr-1] != 0) && (ptr < 512));
- /* ptr == 1 when we arrive on the "char 0" of the end of the filetable */
- if (ptr > 1)
- {
- struct mar_element * e = (struct mar_element *) malloc(sizeof(struct mar_element));
- e->filename = strdup(buf);
- /* read file_length */
- if (BZ2_bzread(s->mar_zfile, &(e->file_length), sizeof(int)) != sizeof(int))
- {
- zerr(s->mar_zfile);
- return -1;
- }
- /* read data_offset */
- if (BZ2_bzread(s->mar_zfile, &(e->data_offset), sizeof(int)) != sizeof(int))
- {
- zerr(s->mar_zfile);
- return -1;
- }
- /* write down chaining */
- if (previous_element)
- previous_element->next_element = e;
- else
- s->first_element = e;
- previous_element = e;
- }
- else
- end_filetable = 1;
-
- }
- /* chaining for last element */
- previous_element->next_element = NULL;
-
- return 0;
-}
-
-
-char **
-mar_list_contents(char * mar_filename)
-{
- struct mar_stream s;
- struct mar_element * elem;
- char * tmp_contents[500];
- char ** answ;
- int i = 0;
-
- if (mar_open_file(mar_filename, &s))
- return NULL;
-
- elem = s.first_element;
- while (elem)
- {
- tmp_contents[i++] = strdup(elem->filename);
- elem = elem->next_element;
- }
- tmp_contents[i++] = NULL;
- answ = (char **) malloc(sizeof(char *) * i);
- memcpy(answ, tmp_contents, sizeof(char *) * i);
- return answ;
-}
-
-
-int
-mar_extract_file(char *mar_filename, char *filename_to_extract, char *dest_dir)
-{
- struct mar_stream s;
- struct mar_element * elem;
-
- if (mar_open_file(mar_filename, &s))
- return -1;
-
- elem = s.first_element;
- while (elem)
- {
- if (strcmp(elem->filename, filename_to_extract) == 0)
- {
- char garb_buf[4096];
- char *buf;
- char *dest_file;
- int fd;
- size_t i;
- dest_file = (char *) alloca(strlen(dest_dir) + strlen(filename_to_extract) + 1);
- strcpy(dest_file, dest_dir);
- strcat(dest_file, filename_to_extract);
- fd = creat(dest_file, 00660);
- if (fd == -1)
- {
- log_perror(dest_file);
- return -1;
- }
- buf = (char *) alloca(elem->file_length);
- if (!buf)
- {
- log_perror(dest_file);
- return -1;
- }
- i = elem->data_offset;
- while (i > 0) {
- int to_read = i > sizeof(garb_buf) ? sizeof(garb_buf) : i;
- if (BZ2_bzread(s.mar_zfile, garb_buf, to_read) != to_read) {
- log_message("MAR: unexpected EOF in stream");
- return -1;
- }
- i -= to_read;
- }
- if (BZ2_bzread(s.mar_zfile, buf, elem->file_length) != elem->file_length)
- {
- zerr(s.mar_zfile);
- return -1;
- }
- if (write(fd, buf, elem->file_length) != elem->file_length)
- {
- log_perror(dest_file);
- return -1;
- }
- close(fd); /* do not check return value for code size */
- BZ2_bzclose(s.mar_zfile);
- return 0;
- }
- elem = elem->next_element;
- }
- BZ2_bzclose(s.mar_zfile);
- return 1; /* 1 for file_not_found_in_archive */
-}
-
-
diff --git a/mdk-stage1/mar/mar-extract-only.h b/mdk-stage1/mar/mar-extract-only.h
deleted file mode 100644
index 6fa34efe4..000000000
--- a/mdk-stage1/mar/mar-extract-only.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through zlib).
- *
- */
-
-/*
- * Header for stage1 on-the-fly needs.
- */
-
-#ifndef MAR_EXTRACT_ONLY_H
-#define MAR_EXTRACT_ONLY_H
-
-int mar_extract_file(char *mar_filename, char *filename_to_extract, char *dest_dir);
-char ** mar_list_contents(char *mar_filename);
-
-#endif
diff --git a/mdk-stage1/mar/mar-frontend.c b/mdk-stage1/mar/mar-frontend.c
deleted file mode 100644
index f55ba6fe6..000000000
--- a/mdk-stage1/mar/mar-frontend.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through zlib).
- *
- */
-
-/*
- * This code includes the extracting and creating features.
- *
- */
-
-#include "mar.h"
-#include "mar-extract-only.h"
-
-
-int
-file_size(char *filename)
-{
- struct stat buf;
- if (stat(filename, &buf) != 0)
- {
- perror(filename);
- return -1;
- }
- return buf.st_size;
-}
-
-
-/* Yes I don't use the datastructure I directly write the final fileformat in memory then write down it.
- * Yes it's bad.
- */
-/* ``files'' is a NULL-terminated array of char* */
-
-char * fnf_tag = "FILE_NOT_FOUND&";
-
-int
-mar_create_file(char *dest_file, char **files)
-{
- int filenum = 0;
- int current_offset_filetable = 0;
- int current_delta_rawdata = 0;
- int filetable_size;
- char * temp_marfile_buffer;
- int total_length = 0;
-
- filetable_size = sizeof(char); /* ``char 0'' */
- while (files[filenum])
- {
- int fsiz = file_size(files[filenum]);
- if (fsiz == -1)
- files[filenum] = fnf_tag;
- else {
- filetable_size += 2*sizeof(int) /* file_length, data_offset */ + strlen(files[filenum]) + 1;
- total_length += fsiz;
- }
- filenum++;
- }
-
- total_length += filetable_size;
-
- temp_marfile_buffer = (char *) malloc(total_length); /* create the whole file in-memory (not with alloca! it can be bigger than typical limit for stack of programs (ulimit -s) */
- DEBUG_MAR(printf("D: mar::create_marfile total-length %d\n", total_length););
-
- filenum = 0;
- while (files[filenum])
- {
- if (strcmp(files[filenum], fnf_tag)) {
- FILE * f = fopen(files[filenum], "r");
- int fsize;
- if (!f)
- {
- perror(files[filenum]);
- return -1;
- }
-
- /* filename */
- strcpy(&(temp_marfile_buffer[current_offset_filetable]), files[filenum]);
- current_offset_filetable += strlen(files[filenum]) + 1;
-
- /* file_length */
- fsize = file_size(files[filenum]);
- if (fsize == -1) return -1;
- memcpy(&temp_marfile_buffer[current_offset_filetable], &fsize, sizeof(int));
- current_offset_filetable += sizeof(int);
-
- /* data_offset */
- memcpy(&temp_marfile_buffer[current_offset_filetable], &current_delta_rawdata, sizeof(int));
- current_offset_filetable += sizeof(int);
-
- /* data_raw_data */
- if (fread(&temp_marfile_buffer[current_delta_rawdata + filetable_size], 1, fsize, f) != (size_t)fsize)
- {
- perror(files[filenum]);
- return -1;
- }
- fclose(f);
-
- current_delta_rawdata += fsize;
- }
-
- filenum++;
- }
-
- /* write down ``char 0'' to terminate file table */
- memset(&temp_marfile_buffer[current_offset_filetable], 0, sizeof(char));
-
- /* ok, buffer is ready, let's write it on-disk */
- {
- BZFILE * f = BZ2_bzopen(dest_file, "w9");
- if (!f)
- {
- perror(dest_file);
- return -1;
- }
- if (BZ2_bzwrite(f, temp_marfile_buffer, total_length) != total_length)
- {
- fprintf(stderr, BZ2_bzerror(f, &z_errnum));
- return -1;
- }
- BZ2_bzclose(f);
- }
-
- printf("mar: created archive %s (%d files, length %d)\n", dest_file, filenum, total_length);
- return 0;
-}
-
-
-void
-print_usage(char *progname)
-{
- printf("Usage: %s [-lxc] [files..]\n", progname);
- exit(0);
-}
-
-int
-main(int argc, char **argv)
-{
- if (argc <= 2)
- print_usage(argv[0]);
-
- if (argc >= 3)
- {
- if (strcmp(argv[1], "-l") == 0)
- {
- char ** contents = mar_list_contents(argv[2]);
- if (contents)
- while (contents && *contents) {
- printf("\t%s\n", *contents);
- contents++;
- }
- exit(0);
- }
- if ((strcmp(argv[1], "-x") == 0) && argc == 4)
- {
- int res = mar_extract_file(argv[2], argv[3], "./");
- if (res == 1)
- fprintf(stderr, "W: file-not-found-in-archive %s\n", argv[3]);
- if (res == -1)
- exit(-1);
- exit(0);
- }
- if ((strcmp(argv[1], "-c") == 0) && argc >= 4)
- {
- char **files = (char **) alloca(((argc-3)+1) * sizeof(char *));
- int i = 3;
- while (i < argc)
- {
- files[i-3] = argv[i];
- i++;
- }
- files[argc-3] = NULL;
- {
- int results;
- results = mar_create_file(argv[2], files);
- if (results != 0)
- fprintf(stderr, "E: create-marfile-failed\n");
- exit(results);
- }
-
- }
- }
-
- return 0;
-}
diff --git a/mdk-stage1/mar/mar.h b/mdk-stage1/mar/mar.h
deleted file mode 100644
index 672d7ded8..000000000
--- a/mdk-stage1/mar/mar.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through bzlib).
- *
- * Designed to be small so these bad designs are inside:
- * . archive and compression are mixed together
- * . create the mar file in-memory
- * . does not free memory
- *
- */
-
-#ifndef MAR_H
-#define MAR_H
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <bzlib.h>
-
-/*
- * Format of a mar file:
- *
- * ASCIIZ filename \ |
- * int file_length | repeated | bzipped
- * int pointer_in_archive / |
- * char 0 |
- * raw_files_data /
- *
- */
-
-struct mar_element
-{
- char * filename; /* filename (ASCIIZ) of the element */
- int file_length; /* length (in bytes) of the raw data of the element */
- int data_offset; /* seek start of the raw data in the underlying mar stream */
- struct mar_element * next_element; /* pointer to the next element in the mar stream; NULL if last */
-};
-
-struct mar_stream
-{
- struct mar_element * first_element; /* pointer to the first element inside the mar stream */
- BZFILE * mar_zfile; /* associated zfile (opened) */
-};
-
-int z_errnum;
-
-#define DEBUG_MAR(x)
-
-#endif
diff --git a/mdk-stage1/minilibc.c b/mdk-stage1/minilibc.c
deleted file mode 100644
index 73d7deae5..000000000
--- a/mdk-stage1/minilibc.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-
-#define MINILIBC_INTERNAL
-
-#include "minilibc.h"
-
-int atexit (void (*__func) (void) __attribute__ ((unused)))
-{
- return 0;
-}
-
-void exit()
-{
- _do_exit(0);
- for (;;); /* Shut up gcc */
-}
-
-
-char ** _environ = NULL;
-int errno = 0;
-
-void _init (int __status __attribute__ ((unused)))
-{
-}
-
-void __libc_init_first (int __status __attribute__ ((unused)))
-{
-}
-
-int __libc_start_main (int (*main) (int, char **, char **), int argc,
- char **argv, void (*init) (void) __attribute__ ((unused)), void (*fini) (void) __attribute__ ((unused)),
- void (*rtld_fini) (void) __attribute__ ((unused)), void *stack_end __attribute__ ((unused)))
-{
- exit ((*main) (argc, argv, NULL));
- /* never get here */
- return 0;
-}
-
-void _fini (int __status __attribute__ ((unused)))
-{
-}
-
-inline int socket(int a, int b, int c)
-{
- unsigned long args[] = { a, b, c };
-
- return socketcall(SYS_SOCKET, args);
-}
-
-inline int bind(int a, void * b, int c)
-{
- unsigned long args[] = { a, (long) b, c };
-
- return socketcall(SYS_BIND, args);
-}
-
-inline int listen(int a, int b)
-{
- unsigned long args[] = { a, b, 0 };
-
- return socketcall(SYS_LISTEN, args);
-}
-
-inline int accept(int a, void * addr, void * addr2)
-{
- unsigned long args[] = { a, (long) addr, (long) addr2 };
-
- return socketcall(SYS_ACCEPT, args);
-}
-
-
-void sleep(int secs)
-{
- struct timeval tv;
-
- tv.tv_sec = secs;
- tv.tv_usec = 0;
-
- select(0, NULL, NULL, NULL, &tv);
-}
-
-
-int strlen(const char * string)
-{
- int i = 0;
-
- while (*string++) i++;
-
- return i;
-}
-
-char * strncpy(char * dst, const char * src, int len)
-{
- char * chptr = dst;
- int i = 0;
-
- while (*src && i < len) *dst++ = *src++, i++;
- if (i < len) *dst = '\0';
-
- return chptr;
-}
-
-char * strcpy(char * dst, const char * src)
-{
- char * chptr = dst;
-
- while (*src) *dst++ = *src++;
- *dst = '\0';
-
- return chptr;
-}
-
-void * memcpy(void * dst, const void * src, size_t count)
-{
- char * a = dst;
- const char * b = src;
-
- while (count--)
- *a++ = *b++;
-
- return dst;
-}
-
-
-int strcmp(const char * a, const char * b)
-{
- int i, j;
-
- i = strlen(a); j = strlen(b);
- if (i < j)
- return -1;
- else if (j < i)
- return 1;
-
- while (*a && (*a == *b)) a++, b++;
-
- if (!*a) return 0;
-
- if (*a < *b)
- return -1;
- else
- return 1;
-}
-
-int strncmp(const char * a, const char * b, int len)
-{
- char buf1[1000], buf2[1000];
-
- strncpy(buf1, a, len);
- strncpy(buf2, b, len);
- buf1[len] = '\0';
- buf2[len] = '\0';
-
- return strcmp(buf1, buf2);
-}
-
-char * strchr(char * str, int ch)
-{
- char * chptr;
-
- chptr = str;
- while (*chptr)
- {
- if (*chptr == ch) return chptr;
- chptr++;
- }
-
- return NULL;
-}
-
-
-char * strstr(char *haystack, char *needle)
-{
- char * tmp = haystack;
- while ((tmp = strchr(tmp, needle[0])) != NULL) {
- int i = 1;
- while (i < strlen(tmp) && i < strlen(needle) && tmp[i] == needle[i])
- i++;
- if (needle[i] == '\0')
- return tmp;
- tmp++;
- }
- return NULL;
-}
-
-
-/* Minimum printf which handles only characters, %d's and %s's */
-void printf(char * fmt, ...)
-{
- char buf[2048];
- char * start = buf;
- char * chptr = buf;
- va_list args;
- char * strarg;
- int numarg;
-
- strncpy(buf, fmt, sizeof(buf));
- va_start(args, fmt);
-
- while (start)
- {
- while (*chptr != '%' && *chptr) chptr++;
-
- if (*chptr == '%')
- {
- *chptr++ = '\0';
- print_str_init(1, start);
-
- switch (*chptr++)
- {
- case 's':
- strarg = va_arg(args, char *);
- print_str_init(1, strarg);
- break;
-
- case 'd':
- numarg = va_arg(args, int);
- print_int_init(1, numarg);
- break;
- }
-
- start = chptr;
- }
- else
- {
- print_str_init(1, start);
- start = NULL;
- }
- }
-}
-
diff --git a/mdk-stage1/minilibc.h b/mdk-stage1/minilibc.h
deleted file mode 100644
index e0775e3a0..000000000
--- a/mdk-stage1/minilibc.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-
-#include <stdarg.h>
-
-#define _LOOSE_KERNEL_NAMES 1
-
-#define NULL ((void *) 0)
-
-#define WIFSTOPPED(status) (((status) & 0xff) == 0x7f)
-#define WIFSIGNALED(status) (!WIFSTOPPED(status) && !WIFEXITED(status))
-#define WEXITSTATUS(status) (((status) & 0xff00) >> 8)
-#define WTERMSIG(status) ((status) & 0x7f)
-#define WSTOPSIG(status) WEXITSTATUS(status)
-#define WIFEXITED(status) (WTERMSIG(status) == 0)
-
-#define MS_MGC_VAL 0xc0ed0000
-
-#define isspace(a) (a == ' ' || a == '\t')
-
-extern char ** _environ;
-
-extern int errno;
-
-/* Aieee, gcc 2.95+ creates a stub for posix_types.h on i386 which brings
- glibc headers in and thus makes __FD_SET etc. not defined with 2.3+ kernels. */
-#define _FEATURES_H 1
-#include <linux/socket.h>
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/if.h>
-#include <linux/un.h>
-#include <linux/loop.h>
-#include <linux/net.h>
-#include <asm/posix_types.h>
-#include <asm/termios.h>
-#include <asm/ioctls.h>
-#include <asm/unistd.h>
-#include <asm/fcntl.h>
-#include <asm/signal.h>
-
-
-#ifndef MINILIBC_INTERNAL
-static inline _syscall5(int,mount,const char *,spec,const char *,dir,const char *,type,unsigned long,rwflag,const void *,data);
-static inline _syscall5(int,_newselect,int,n,fd_set *,rd,fd_set *,wr,fd_set *,ex,struct timeval *,timeval);
-static inline _syscall4(int,wait4,pid_t,pid,int *,status,int,opts,void *,rusage)
-static inline _syscall3(int,write,int,fd,const char *,buf,unsigned long,count)
-static inline _syscall3(int,reboot,int,magic,int,magic_too,int,flag)
-static inline _syscall3(int,execve,const char *,fn,void *,argv,void *,envp)
-static inline _syscall3(int,read,int,fd,const char *,buf,unsigned long,count)
-static inline _syscall3(int,open,const char *,fn,int,flags,mode_t,mode)
-static inline _syscall3(int,ioctl,int,fd,int,request,void *,argp)
-static inline _syscall2(int,dup2,int,one,int,two)
-static inline _syscall2(int,kill,pid_t,pid,int,sig)
-static inline _syscall2(int,symlink,const char *,a,const char *,b)
-static inline _syscall2(int,chmod,const char * ,path,mode_t,mode)
-static inline _syscall2(int,sethostname,const char *,name,int,len)
-static inline _syscall2(int,setdomainname,const char *,name,int,len)
-static inline _syscall2(int,setpgid,int,name,int,len)
-static inline _syscall2(int,signal,int,num,void *,len)
-static inline _syscall1(int,umount,const char *,dir)
-static inline _syscall1(int,unlink,const char *,fn)
-static inline _syscall1(int,close,int,fd)
-static inline _syscall1(int,swapoff,const char *,fn)
-static inline _syscall0(int,getpid)
-static inline _syscall0(int,sync)
-#ifdef __sparc__
-/* Nonstandard fork calling convention :( */
-static inline int fork(void) {
- int __res;
- __asm__ __volatile__ (
- "mov %0, %%g1\n\t"
- "t 0x10\n\t"
- "bcc 1f\n\t"
- "dec %%o1\n\t"
- "sethi %%hi(%2), %%g1\n\t"
- "st %%o0, [%%g1 + %%lo(%2)]\n\t"
- "b 2f\n\t"
- "mov -1, %0\n\t"
- "1:\n\t"
- "and %%o0, %%o1, %0\n\t"
- "2:\n\t"
- : "=r" (__res)
- : "0" (__NR_fork), "i" (&errno)
- : "g1", "o0", "cc");
- return __res;
-}
-#else
-static inline _syscall0(int,fork)
-#endif
-static inline _syscall0(pid_t,setsid)
-static inline _syscall3(int,syslog,int, type, char *, buf, int, len);
-#else
-static inline _syscall5(int,_newselect,int,n,fd_set *,rd,fd_set *,wr,fd_set *,ex,struct timeval *,timeval);
-static inline _syscall3(int,write,int,fd,const char *,buf,unsigned long,count)
-static inline _syscall2(int,socketcall,int,code,unsigned long *, args)
-#define __NR__do_exit __NR_exit
-extern inline _syscall1(int,_do_exit,int,exitcode)
-#endif
-
-#define select _newselect
-
-extern int errno;
-
-inline int socket(int a, int b, int c);
-inline int bind(int a, void * b, int c);
-inline int listen(int a, int b);
-inline int accept(int a, void * addr, void * addr2);
-
-void sleep(int secs);
-
-int strlen(const char * string);
-char * strcpy(char * dst, const char * src);
-void * memcpy(void * dst, const void * src, size_t count);
-int strcmp(const char * a, const char * b);
-int strncmp(const char * a, const char * b, int len);
-char * strchr(char * str, int ch);
-char * strstr(char *haystack, char *needle);
-char * strncpy(char * dst, const char * src, int len);
-
-void print_str_init(int fd, char * string);
-void print_int_init(int fd, int i);
-/* Minimum printf which handles only characters, %d's and %s's */
-void printf(char * fmt, ...) __attribute__ ((format (printf, 1, 2)));
-
diff --git a/mdk-stage1/mkinitrd_helper/Makefile b/mdk-stage1/mkinitrd_helper/Makefile
deleted file mode 100644
index 1fa6a345a..000000000
--- a/mdk-stage1/mkinitrd_helper/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-VERSION = 1.1.1
-
-DEFS = -DVERSION=\"$(VERSION)\"
-
-
-MKINITRD_HELPER_SRC = mkinitrd_helper.c
-MKINITRD_HELPER_LIBS = ../insmod-busybox/libinsmod-DIET.a
-
-MKINITRD_HELPER_OBJS = $(subst .c,.o,$(MKINITRD_HELPER_SRC))
-
-BIN = mkinitrd_helper
-
-all: $(BIN)
-
-clean:
- rm -f *.o $(BIN)
-
-FLAGS = -Wall -Werror -Os -fomit-frame-pointer -c
-
-
-$(MKINITRD_HELPER_OBJS): %.o: %.c
- $(CC) $(DEFS) $(DIETLIBC_INCLUDES) -I.. -c $< -o $@
-
-mkinitrd_helper: $(MKINITRD_HELPER_OBJS) $(MKINITRD_HELPER_LIBS) $(DIETLIBC_LIBC)
- $(CC) $(DIETLIBC_LDFLAGS_STAGE1) -o $@ $^
- $(STRIPCMD) $@
diff --git a/mdk-stage1/mkinitrd_helper/mkinitrd_helper.c b/mdk-stage1/mkinitrd_helper/mkinitrd_helper.c
deleted file mode 100644
index 67be7c340..000000000
--- a/mdk-stage1/mkinitrd_helper/mkinitrd_helper.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2001 MandrakeSoft
- *
- * This software is covered by the GPL license.
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * This little program replaces usual sash and insmod.static based script
- * from mkinitrd (that insmod modules, plus possibly mount a partition and
- * losetup a loopback-based / on the partition).
- *
- *
- * On my machine:
- * gzipped sash + insmod.static 502491 bytes
- * gzipped <this-program> 14243 bytes
- *
- * There will be room for linux-2.4 and many modules, now. Cool.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/mount.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/ioctl.h>
-#include <signal.h>
-
-#include "insmod.h"
-
-int quiet = 0;
-
-void vlog_message(const char * s, va_list args)
-{
- vprintf(s, args);
- printf("\n");
-}
-
-void log_perror(char *msg)
-{
- perror(msg);
-}
-
-
-static void fatal_error(char *msg)
-{
- printf("[] E: %s\n[] giving hand to kernel.\n", msg);
- exit(-1);
-}
-
-static void warning(char *msg)
-{
- printf("[] W: %s\n", msg);
-}
-
-static void parse_parms(const char * parm, char ** parm1, char ** parm2, char ** parm3)
-{
- char * ptr;
-
- ptr = strchr(parm, '\n');
- if (!ptr)
- fatal_error("bad config file: no newline after parms");
-
- *parm1 = malloc(ptr-parm+1); /* yup, never freed :-) */
- memcpy(*parm1, parm, ptr-parm);
- (*parm1)[ptr-parm] = '\0';
-
- if (!parm2)
- return;
-
- *parm2 = strchr(*parm1, ' ');
- if (!*parm2)
- return;
- **parm2 = '\0';
- (*parm2)++;
-
- if (!parm3)
- return;
-
- *parm3 = strchr(*parm2, ' ');
- if (!*parm3)
- return;
- **parm3 = '\0';
- (*parm3)++;
-}
-
-
-static void insmod_(const char * parm)
-{
- char * mod_name, * options;
-
- parse_parms(parm, &mod_name, &options, NULL);
-
-#ifdef DEBUG
- printf("insmod %s options %s\n", mod_name, options);
-#endif
- if (!quiet)
- printf("[] Loading module %s\n", mod_name);
-
- if (insmod_call(mod_name, options))
- perror("insmod failed");
-}
-
-
-static void mount_(const char * parm)
-{
- char * dev, * location, * fs;
- unsigned long flags;
- char * opts = NULL;
-
- parse_parms(parm, &dev, &location, &fs);
-
-#ifdef DEBUG
- printf("mounting %s on %s as type %s\n", dev, location, fs);
-#endif
- if (!quiet)
- printf("[] Mounting device containing loopback root filesystem\n");
-
- flags = MS_MGC_VAL;
-
- if (!strcmp(fs, "vfat"))
- opts = "check=relaxed";
-
- if (mount(dev, location, fs, flags, opts))
- perror("mount failed");
-}
-
-
-#define LO_NAME_SIZE 64
-#define LO_KEY_SIZE 32
-
-struct loop_info
-{
- int lo_number; /* ioctl r/o */
- dev_t lo_device; /* ioctl r/o */
- unsigned long lo_inode; /* ioctl r/o */
- dev_t lo_rdevice; /* ioctl r/o */
- int lo_offset;
- int lo_encrypt_type;
- int lo_encrypt_key_size; /* ioctl w/o */
- int lo_flags; /* ioctl r/o */
- char lo_name[LO_NAME_SIZE];
- unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
- unsigned long lo_init[2];
- char reserved[4];
-};
-
-#define LOOP_SET_FD 0x4C00
-#define LOOP_CLR_FD 0x4C01
-#define LOOP_SET_STATUS 0x4C02
-
-static void set_loop_(const char * parm)
-{
- struct loop_info loopinfo;
- int fd, ffd;
- char * device, * file;
-
- parse_parms(parm, &device, &file, NULL);
-
-#ifdef DEBUG
- printf("set_looping %s with %s\n", device, file);
-#endif
- if (!quiet)
- printf("[] Setting up loopback file %s\n", file);
-
- if ((ffd = open(file, O_RDWR)) < 0) {
- perror("set_loop, opening file in rw");
- exit(-1);
- }
-
- if ((fd = open(device, O_RDWR)) < 0) {
- perror("set_loop, opening loop device in rw");
- close(ffd);
- exit(-1);
- }
-
- memset(&loopinfo, 0, sizeof (loopinfo));
- strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
- loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
- loopinfo.lo_offset = 0;
-
- if (ioctl(fd, LOOP_SET_FD, ffd) < 0) {
- close(fd);
- close(ffd);
- perror("LOOP_SET_FD");
- exit(-1);
- }
-
- if (ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
- (void) ioctl (fd, LOOP_CLR_FD, 0);
- close(fd);
- close(ffd);
- perror("LOOP_SET_STATUS");
- exit(-1);
- }
-
- close(fd);
- close(ffd);
-}
-
-
-#define MD_MAJOR 9
-#define RAID_AUTORUN _IO (MD_MAJOR, 0x14)
-#include <linux/raid/md_u.h>
-
-static void raidautorun_(const char * parm)
-{
- char * device;
- int fd;
-
- parse_parms(parm, &device, NULL, NULL);
-
- if (!quiet)
- printf("[] Calling raid autorun for %s\n", device);
-
- fd = open(device, O_RDWR, 0);
- if (fd < 0) {
- printf("raidautorun: failed to open %s: %d\n", device, errno);
- return;
- }
-
- if (ioctl(fd, RAID_AUTORUN, 0)) {
- printf("raidautorun: RAID_AUTORUN failed: %d\n", errno);
- }
-
- close(fd);
-}
-
-static int handle_command(char ** ptr, char * cmd_name, void (*cmd_func)(const char * parm))
-{
- if (!strncmp(*ptr, cmd_name, strlen(cmd_name))) {
- *ptr = strchr(*ptr, '\n');
- if (!*ptr)
- fatal_error("Bad config file: no newline after command");
- (*ptr)++;
- cmd_func(*ptr);
- *ptr = strchr(*ptr, '\n');
- if (!*ptr)
- exit(0);
- (*ptr)++;
- return 1;
- }
- return 0;
-}
-
-
-int main(int argc, char **argv)
-{
- int fd_conf, i;
- char buf[5000];
- char * ptr;
-
- if (strstr(argv[0], "modprobe"))
- exit(0);
-
- if (mount("/proc", "/loopfs", "proc", 0, NULL))
- printf("[] couldn't mount proc filesystem\n");
- else {
- int fd_cmdline = open("/loopfs/cmdline", O_RDONLY);
- if (fd_cmdline > 0) {
- i = read(fd_cmdline, buf, sizeof(buf));
- if (i == -1)
- warning("could not read cmdline");
- else {
- buf[i] = '\0';
- if (strstr(buf, "quiet"))
- quiet = 1;
- }
- close(fd_cmdline);
- }
- umount("/loopfs");
- }
-
- if (!quiet)
- printf("[] initrd_helper v" VERSION "\n");
-
- if ((fd_conf = open("/mkinitrd_helper.conf", O_RDONLY)) < 0)
- fatal_error("could not open mkinitrd_helper config file");
-
- i = read(fd_conf, buf, sizeof(buf));
- if (i == -1)
- fatal_error("could not read mkinitrd_helper config file");
- buf[i] = '\0';
- close(fd_conf);
-
- ptr = buf;
-
- while (*ptr)
- if (!(handle_command(&ptr, "insmod", insmod_) +
- handle_command(&ptr, "mount", mount_) +
- handle_command(&ptr, "raidautorun", raidautorun_) +
- handle_command(&ptr, "set_loop", set_loop_)))
- warning("unkown command (trying to continue)");
-
- return 0;
-}
diff --git a/mdk-stage1/modules.c b/mdk-stage1/modules.c
deleted file mode 100644
index 1fe1cd42a..000000000
--- a/mdk-stage1/modules.c
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * (1) calculate dependencies
- * (2) unarchive relevant modules
- * (3) insmod them
- */
-
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include "insmod.h"
-#include "stage1.h"
-#include "log.h"
-#include "mar/mar-extract-only.h"
-#include "frontend.h"
-#include "mount.h"
-#include "modules_descr.h"
-
-#include "modules.h"
-
-static struct module_deps_elem * modules_deps = NULL;
-
-static char * archive_name = "/modules/modules.mar";
-int disable_modules = 0;
-
-
-/* unarchive and insmod given module
- * WARNING: module must not contain the trailing ".o"
- */
-static enum insmod_return insmod_archived_file(const char * mod_name, char * options)
-{
- char module_name[50];
- char final_name[50] = "/tmp/";
- int i, rc;
-
- strncpy(module_name, mod_name, sizeof(module_name));
- strcat(module_name, ".o");
- i = mar_extract_file(archive_name, module_name, "/tmp/");
- if (i == 1) {
- log_message("file-not-found-in-archive %s (maybe you can try another boot floppy such as 'other.img' for seldom used SCSI modules)", module_name);
- return INSMOD_FAILED_FILE_NOT_FOUND;
- }
- if (i != 0)
- return INSMOD_FAILED;
-
- strcat(final_name, mod_name);
- strcat(final_name, ".o");
-
- rc = insmod_call(final_name, options);
- unlink(final_name); /* sucking no space left on device */
- if (rc) {
- log_message("\tfailed");
- return INSMOD_FAILED;
- }
- return INSMOD_OK;
-}
-
-
-
-static int load_modules_dependencies(void)
-{
- char * deps_file = "/modules/modules.dep";
- char * buf, * ptr, * start, * end;
- struct stat s;
- int fd, line, i;
-
- log_message("loading modules dependencies");
-
- if (IS_TESTING)
- return 0;
-
- fd = open(deps_file, O_RDONLY);
- if (fd == -1) {
- log_perror(deps_file);
- return -1;
- }
-
- fstat(fd, &s);
- buf = alloca(s.st_size + 1);
- if (read(fd, buf, s.st_size) != (ssize_t)s.st_size) {
- log_perror(deps_file);
- return -1;
- }
- buf[s.st_size] = '\0';
- close(fd);
-
- ptr = buf;
- line = 0;
- while (ptr) {
- line++;
- ptr = strchr(ptr + 1, '\n');
- }
-
- modules_deps = malloc(sizeof(*modules_deps) * (line+1));
-
- start = buf;
- line = 0;
- while (start < (buf+s.st_size) && *start) {
- char * tmp_deps[50];
-
- end = strchr(start, '\n');
- *end = '\0';
-
- ptr = strchr(start, ':');
- if (!ptr) {
- start = end + 1;
- continue;
- }
- *ptr = '\0';
- ptr++;
-
- while (*ptr && (*ptr == ' ')) ptr++;
- if (!*ptr) {
- start = end + 1;
- continue;
- }
-
- /* sort of a good line */
- modules_deps[line].name = strdup(start);
-
- start = ptr;
- i = 0;
- while (start && *start) {
- ptr = strchr(start, ' ');
- if (ptr) *ptr = '\0';
- tmp_deps[i++] = strdup(start);
- if (ptr)
- start = ptr + 1;
- else
- start = NULL;
- while (start && *start && *start == ' ')
- start++;
- }
- tmp_deps[i++] = NULL;
-
- modules_deps[line].deps = memdup(tmp_deps, sizeof(char *) * i);
-
- line++;
- start = end + 1;
- }
- modules_deps[line].name = NULL;
-
- return 0;
-}
-
-
-void init_modules_insmoding(void)
-{
- if (load_modules_dependencies()) {
- log_message("warning, error initing modules stuff, modules loading disabled");
- disable_modules = 1;
- }
-}
-
-
-static void add_modules_conf(char * str)
-{
- static char data[5000] = "";
- char * target = "/etc/modules.conf";
- int fd;
-
- if (strlen(data) + strlen(str) >= sizeof(data))
- return;
-
- strcat(data, str);
- strcat(data, "\n");
-
- fd = open(target, O_CREAT|O_WRONLY|O_TRUNC, 00660);
-
- if (fd == -1) {
- log_perror(str);
- return;
- }
-
- if (write(fd, data, strlen(data) + 1) != (ssize_t) (strlen(data) + 1))
- log_perror(str);
-
- close(fd);
-}
-
-
-static int module_already_present(const char * name)
-{
- FILE * f;
- int answ = 0;
- f = fopen("/proc/modules", "rb");
- while (1) {
- char buf[500];
- if (!fgets(buf, sizeof(buf), f)) break;
- if (!strncmp(name, buf, strlen(name)) && buf[strlen(name)] == ' ')
- answ = 1;
- }
- fclose(f);
- return answ;
-}
-
-
-static enum insmod_return insmod_with_deps(const char * mod_name, char * options)
-{
- struct module_deps_elem * dep;
-
- dep = modules_deps;
- while (dep && dep->name && strcmp(dep->name, mod_name)) dep++;
-
- if (dep && dep->name && dep->deps) {
- char ** one_dep;
- one_dep = dep->deps;
- while (*one_dep) {
- /* here, we can fail but we don't care, if the error is
- * important, the desired module will fail also */
- insmod_with_deps(*one_dep, NULL);
- one_dep++;
- }
- }
-
- if (module_already_present(mod_name))
- return INSMOD_OK;
-
- log_message("needs %s", mod_name);
- return insmod_archived_file(mod_name, options);
-}
-
-
-#ifndef DISABLE_NETWORK
-enum insmod_return my_insmod(const char * mod_name, enum driver_type type, char * options)
-#else
-enum insmod_return my_insmod(const char * mod_name, enum driver_type type __attribute__ ((unused)), char * options)
-#endif
-{
- int i;
-#ifndef DISABLE_NETWORK
- char ** net_devices = NULL; /* fucking compiler */
-#endif
-
- log_message("have to insmod %s", mod_name);
-
- if (disable_modules) {
- log_message("\tdisabled");
- return INSMOD_OK;
- }
-
-#ifndef DISABLE_NETWORK
- if (type == NETWORK_DEVICES)
- net_devices = get_net_devices();
-#endif
-
- if (IS_TESTING)
- return INSMOD_OK;
-
- i = insmod_with_deps(mod_name, options);
- if (i == 0) {
- log_message("\tsucceeded %s", mod_name);
-#ifndef DISABLE_NETWORK
- if (type == NETWORK_DEVICES) {
- char ** new_net_devices = get_net_devices();
- while (new_net_devices && *new_net_devices) {
- char alias[500];
- char ** ptr = net_devices;
- while (ptr && *ptr) {
- if (!strcmp(*new_net_devices, *ptr))
- goto already_present;
- ptr++;
- }
- sprintf(alias, "alias %s %s", *new_net_devices, mod_name);
- add_modules_conf(alias);
- log_message("NET: %s", alias);
- net_discovered_interface(*new_net_devices);
-
- already_present:
- new_net_devices++;
- }
- }
-#endif
- } else
- log_message("warning, insmod failed (%s %s) (%d)", mod_name, options, i);
-
- return i;
-
-}
-
-static enum return_type insmod_with_options(char * mod, enum driver_type type)
-{
- char * questions[] = { "Options", NULL };
- static char ** answers = NULL;
- enum return_type results;
- char options[500] = "options ";
-
- results = ask_from_entries("Please enter the parameters to give to the kernel:", questions, &answers, 24, NULL);
- if (results != RETURN_OK)
- return results;
-
- strcat(options, mod);
- strcat(options, " ");
- strcat(options, answers[0]); // because my_insmod will eventually modify the string
-
- if (my_insmod(mod, type, answers[0]) != INSMOD_OK) {
- stg1_error_message("Insmod failed.");
- return RETURN_ERROR;
- }
-
- add_modules_conf(options);
-
- return RETURN_OK;
-}
-
-enum return_type ask_insmod(enum driver_type type)
-{
- char * mytype;
- char msg[200];
- enum return_type results;
- char * choice;
-
- unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
-
- if (type == SCSI_ADAPTERS)
- mytype = "SCSI";
- else if (type == NETWORK_DEVICES)
- mytype = "NET";
- else
- return RETURN_ERROR;
-
- if (disable_modules)
- return RETURN_BACK;
-
- snprintf(msg, sizeof(msg), "Which driver should I try to gain %s access?", mytype);
-
- {
- char ** drivers = mar_list_contents(archive_name);
- char ** descrs = malloc(sizeof(char *) * string_array_length(drivers));
- char ** p_drivers = drivers;
- char ** p_descrs = descrs;
- while (p_drivers && *p_drivers) {
- int i;
- *p_descrs = NULL;
- for (i = 0 ; i < modules_descriptions_num ; i++) {
- if (!strncmp(*p_drivers, modules_descriptions[i].module, strlen(modules_descriptions[i].module))
- && (*p_drivers)[strlen(modules_descriptions[i].module)] == '.') /* one contains '.o' not the other */
- *p_descrs = modules_descriptions[i].descr;
- }
- p_drivers++;
- p_descrs++;
- }
- results = ask_from_list_comments(msg, drivers, descrs, &choice);
- }
-
- if (results == RETURN_OK) {
- choice[strlen(choice)-2] = '\0'; /* remove trailing .o */
- return insmod_with_options(choice, type);
- } else
- return results;
-}
-
-
-void update_modules(void)
-{
- FILE * f;
- char ** disk_contents;
- char final_name[500];
- char floppy_mount_location[] = "/tmp/floppy";
-
- stg1_info_message("Please insert the Update Modules floppy.");;
-
- my_insmod("floppy", ANY_DRIVER_TYPE, NULL);
-
- if (my_mount("/dev/fd0", floppy_mount_location, "ext2", 0) == -1) {
- enum return_type results = ask_yes_no("I can't find a Linux ext2 floppy in first floppy drive.\n"
- "Retry?");
- if (results == RETURN_OK)
- return update_modules();
- return;
- }
-
- disk_contents = list_directory(floppy_mount_location);
-
- if (!(f = fopen("/tmp/floppy/to_load", "rb"))) {
- stg1_error_message("I can't find \"to_load\" file.");
- umount(floppy_mount_location);
- return update_modules();
- }
- while (1) {
- char module[500];
- char * options;
- char ** entry = disk_contents;
-
- if (!fgets(module, sizeof(module), f)) break;
- if (module[0] == '#' || strlen(module) == 0)
- continue;
-
- while (module[strlen(module)-1] == '\n')
- module[strlen(module)-1] = '\0';
- options = strchr(module, ' ');
- if (options) {
- options[0] = '\0';
- options++;
- }
-
- log_message("updatemodules: (%s) (%s)", module, options);
- while (entry && *entry) {
- if (!strncmp(*entry, module, strlen(module)) && (*entry)[strlen(module)] == '.') {
- sprintf(final_name, "%s/%s", floppy_mount_location, *entry);
- if (insmod_call(final_name, options)) {
- log_message("\t%s (floppy): failed", *entry);
- stg1_error_message("Insmod %s (floppy) failed.", *entry);
- }
- break;
- }
- entry++;
- }
- if (!entry || !*entry) {
- enum insmod_return ret = my_insmod(module, ANY_DRIVER_TYPE, options);
- if (ret != INSMOD_OK) {
- log_message("\t%s (marfile): failed", module);
- stg1_error_message("Insmod %s (marfile) failed.", module);
- }
- }
- }
- fclose(f);
- umount(floppy_mount_location);
-}
diff --git a/mdk-stage1/modules.h b/mdk-stage1/modules.h
deleted file mode 100644
index a5fccb609..000000000
--- a/mdk-stage1/modules.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _MODULES_H_
-#define _MODULES_H_
-
-#include "stage1.h"
-#include "probing.h"
-
-enum insmod_return { INSMOD_OK, INSMOD_FAILED, INSMOD_FAILED_FILE_NOT_FOUND };
-
-void init_modules_insmoding(void);
-enum insmod_return my_insmod(const char * mod_name, enum driver_type type, char * options);
-enum return_type ask_insmod(enum driver_type);
-void update_modules(void);
-
-struct module_deps_elem {
- char * name;
- char ** deps;
-};
-
-extern int disable_modules;
-
-#endif
diff --git a/mdk-stage1/modules_descr.h b/mdk-stage1/modules_descr.h
deleted file mode 100644
index d38f437d8..000000000
--- a/mdk-stage1/modules_descr.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2001 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _MODULES_DESCR_H_
-#define _MODULES_DESCR_H_
-
-struct module_descr {
- const char * module;
- char * descr;
-};
-
-struct module_descr modules_descriptions[] = {
-#ifndef DISABLE_NETWORK
- /* description of network drivers that have not very explicit names */
- { "ne", "NE1000/NE2000/clones" },
- { "ne2k-pci", "PCI NE2000" },
- { "depca", "DEC DEPCA/DE100/DE101/DE200/DE201/DE202/DE210/DE422" },
- { "dgrs", "Digi RightSwitch SE-X" },
- { "ewrk3", "DEC DE203/DE204/DE205" },
- { "lance", "Allied Telesis AT1500, HP J2405A, NE2100/NE2500" },
- { "sis900", "SiS 900/7016/630E, Am79c901, RTL8201" },
- { "via-rhine", "VIA VT86c100A Rhine-II, 3043 Rhine-I" },
- { "tulip", "DEC 21040-family based cards" },
- { "wd", "WD8003/WD8013" },
- { "bmac", "Macintosh integrated ethernet (G3)" },
- { "gmac", "Macintosh integrated ethernet (G4/iBook)" },
- { "mace", "Macintosh integrated ethernet (PowerMac)" },
-#endif
-
-#ifndef DISABLE_MEDIAS
- /* description of scsi drivers that have not very explicit names */
- { "53c7,8xx", "NCR53c810/700" },
- { "sim710", "NCR53c710" },
- { "aic7xxx", "Adaptec 7xxx family (AIC/AHA/etc)" },
- { "atp870u", "ACARD/ARTOP AEC-6710/6712" },
- { "ncr53c8xx", "Symbios 53c family" },
- { "sym53c8xx", "Symbios 53c family" },
- { "sim710", "NCR53C710 family" },
- { "mesh", "Macintosh integrated SCSI (NewWorld or internal SCSI)" },
- { "mac53c94", "Macintosh integrated SCSI (OldWorld or external SCSI)" },
-#endif
-
-#ifdef ENABLE_USB
- /* description of usb drivers that have not very explicit names */
- { "usbnet", "Netchip or Prolific USB-USB Bridge" },
- { "pegasus", "ADMtek AN986 (USB Ethernet chipset)" },
- { "kaweth", "KL5KUSB101 (USB Ethernet chipset)" },
- { "catc", "CATC EL1210A NetMate USB Ethernet" },
-#endif
-};
-
-int modules_descriptions_num = sizeof(modules_descriptions) / sizeof(struct module_descr);
-
-
-#endif
diff --git a/mdk-stage1/mount.c b/mdk-stage1/mount.c
deleted file mode 100644
index fd86a13b7..000000000
--- a/mdk-stage1/mount.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include "log.h"
-#include "modules.h"
-
-#include "mount.h"
-
-
-
-#ifndef DISABLE_MEDIAS
-/* WARNING: this won't work if the argument is not /dev/ based */
-int ensure_dev_exists(char *dev)
-{
- int major, minor;
- int type = S_IFBLK; /* my default type is block. don't forget to change for chars */
- char * name;
- struct stat buf;
- char * ptr;
-
- name = &dev[5]; /* we really need that dev be passed as /dev/something.. */
-
- if (!stat(dev, &buf))
- return 0; /* if the file already exists, we assume it's correct */
-
- if (ptr_begins_static_str(name, "sd")) {
- /* SCSI disks */
- major = 8;
- minor = (name[2] - 'a') << 4;
- if (name[3] && name[4])
- minor += 10 + (name[4] - '0');
- else if (name[3])
- minor += (name[3] - '0');
- } else if (ptr_begins_static_str(name, "hd")) {
- /* IDE disks/cd's */
- if (name[2] == 'a')
- major = 3, minor = 0;
- else if (name[2] == 'b')
- major = 3, minor = 64;
- else if (name[2] == 'c')
- major = 22, minor = 0;
- else if (name[2] == 'd')
- major = 22, minor = 64;
- else if (name[2] == 'e')
- major = 33, minor = 0;
- else if (name[2] == 'f')
- major = 33, minor = 64;
- else if (name[2] == 'g')
- major = 34, minor = 0;
- else if (name[2] == 'h')
- major = 34, minor = 64;
- else
- return -1;
-
- if (name[3] && name[4])
- minor += 10 + (name[4] - '0');
- else if (name[3])
- minor += (name[3] - '0');
- } else if (ptr_begins_static_str(name , "sr")) {
- /* SCSI cd's */
- major = 11;
- minor = name[2] - '0';
- } else if (ptr_begins_static_str(name, "ida/") ||
- ptr_begins_static_str(name, "cciss/")) {
- /* Compaq Smart Array "ida/c0d0{p1}" */
- ptr = strchr(name, '/');
- mkdir("/dev/ida", 0755);
- mkdir("/dev/cciss", 0755);
- major = ptr_begins_static_str(name, "ida/") ? 72 : 104 + charstar_to_int(ptr+2);
- ptr = strchr(ptr, 'd');
- minor = 16 * charstar_to_int(ptr+1);
- ptr = strchr(ptr, 'p');
- minor += charstar_to_int(ptr+1);
- } else if (ptr_begins_static_str(name, "rd/")) {
- /* DAC960 "rd/cXdXXpX" */
- mkdir("/dev/rd", 0755);
- major = 48 + charstar_to_int(name+4);
- ptr = strchr(name+4, 'd');
- minor = 8 * charstar_to_int(ptr+1);
- ptr = strchr(ptr, 'p');
- minor += charstar_to_int(ptr+1);
- } else {
- log_message("I don't know how to create device %s, please post bugreport to me!", dev);
- return -1;
- }
-
- if (mknod(dev, type | 0600, makedev(major, minor))) {
- log_perror(dev);
- return -1;
- }
-
- return 0;
-}
-#endif /* DISABLE_MEDIAS */
-
-
-/* mounts, creating the device if needed+possible */
-int my_mount(char *dev, char *location, char *fs, int force_rw)
-{
- unsigned long flags = MS_MGC_VAL | (force_rw ? 0 : MS_RDONLY);
- char * opts = NULL;
- struct stat buf;
- int rc;
-
-#ifndef DISABLE_MEDIAS
- if (strcmp(fs, "nfs")) {
- rc = ensure_dev_exists(dev);
- if (rc != 0) {
- log_message("could not create required device file");
- return -1;
- }
- }
-#endif
-
- log_message("mounting %s on %s as type %s", dev, location, fs);
-
- if (stat(location, &buf)) {
- if (mkdir(location, 0755)) {
- log_perror("could not create location dir");
- return -1;
- }
- } else if (!S_ISDIR(buf.st_mode)) {
- log_message("not a dir %s, will unlink and mkdir", location);
- if (unlink(location)) {
- log_perror("could not unlink");
- return -1;
- }
- if (mkdir(location, 0755)) {
- log_perror("could not create location dir");
- return -1;
- }
- }
-
-#ifndef DISABLE_MEDIAS
- if (!strcmp(fs, "vfat")) {
- my_insmod("vfat", ANY_DRIVER_TYPE, NULL);
- opts = "check=relaxed";
- }
-
- if (!strcmp(fs, "reiserfs"))
- my_insmod("reiserfs", ANY_DRIVER_TYPE, NULL);
-
- if (!strcmp(fs, "iso9660"))
- my_insmod("isofs", ANY_DRIVER_TYPE, NULL);
-#endif
-
-#ifndef DISABLE_NETWORK
- if (!strcmp(fs, "nfs")) {
- int flags = MS_RDONLY;
- my_insmod("nfs", ANY_DRIVER_TYPE, NULL);
- log_message("preparing nfsmount for %s", dev);
- rc = nfsmount_prepare(dev, &flags, &opts);
- if (rc != 0)
- return rc;
- }
-#endif
-
- rc = mount(dev, location, fs, flags, opts);
- if (rc != 0) {
- log_perror("mount failed");
- rmdir(location);
- }
-
- return rc;
-}
diff --git a/mdk-stage1/mount.h b/mdk-stage1/mount.h
deleted file mode 100644
index 82795462f..000000000
--- a/mdk-stage1/mount.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#ifndef _MOUNT_H_
-#define _MOUNT_H_
-
-#ifndef DISABLE_NETWORK
-#include "nfsmount.h"
-#endif
-
-int my_mount(char *dev, char *location, char *fs, int force_rw);
-
-#ifndef DISABLE_MEDIAS
-int ensure_dev_exists(char *dev);
-#endif
-
-#endif
diff --git a/mdk-stage1/mount_rpcgen.h b/mdk-stage1/mount_rpcgen.h
deleted file mode 100644
index d70ccaf9d..000000000
--- a/mdk-stage1/mount_rpcgen.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Please do not edit this file.
- * It was generated using rpcgen.
- */
-
-#ifndef _MOUNT_H_RPCGEN
-#define _MOUNT_H_RPCGEN
-
-#include <rpc/rpc.h>
-
-#define MNTPATHLEN 1024
-#define MNTNAMLEN 255
-#define FHSIZE 32
-
-typedef char fhandle[FHSIZE];
-#ifdef __cplusplus
-extern "C" bool_t xdr_fhandle(XDR *, fhandle);
-#elif __STDC__
-extern bool_t xdr_fhandle(XDR *, fhandle);
-#else /* Old Style C */
-bool_t xdr_fhandle();
-#endif /* Old Style C */
-
-
-struct fhstatus {
- u_int fhs_status;
- union {
- fhandle fhs_fhandle;
- } fhstatus_u;
-};
-typedef struct fhstatus fhstatus;
-#ifdef __cplusplus
-extern "C" bool_t xdr_fhstatus(XDR *, fhstatus*);
-#elif __STDC__
-extern bool_t xdr_fhstatus(XDR *, fhstatus*);
-#else /* Old Style C */
-bool_t xdr_fhstatus();
-#endif /* Old Style C */
-
-
-typedef char *dirpath;
-#ifdef __cplusplus
-extern "C" bool_t xdr_dirpath(XDR *, dirpath*);
-#elif __STDC__
-extern bool_t xdr_dirpath(XDR *, dirpath*);
-#else /* Old Style C */
-bool_t xdr_dirpath();
-#endif /* Old Style C */
-
-
-typedef char *name;
-#ifdef __cplusplus
-extern "C" bool_t xdr_name(XDR *, name*);
-#elif __STDC__
-extern bool_t xdr_name(XDR *, name*);
-#else /* Old Style C */
-bool_t xdr_name();
-#endif /* Old Style C */
-
-
-typedef struct mountbody *mountlist;
-#ifdef __cplusplus
-extern "C" bool_t xdr_mountlist(XDR *, mountlist*);
-#elif __STDC__
-extern bool_t xdr_mountlist(XDR *, mountlist*);
-#else /* Old Style C */
-bool_t xdr_mountlist();
-#endif /* Old Style C */
-
-
-struct mountbody {
- name ml_hostname;
- dirpath ml_directory;
- mountlist ml_next;
-};
-typedef struct mountbody mountbody;
-#ifdef __cplusplus
-extern "C" bool_t xdr_mountbody(XDR *, mountbody*);
-#elif __STDC__
-extern bool_t xdr_mountbody(XDR *, mountbody*);
-#else /* Old Style C */
-bool_t xdr_mountbody();
-#endif /* Old Style C */
-
-
-typedef struct groupnode *groups;
-#ifdef __cplusplus
-extern "C" bool_t xdr_groups(XDR *, groups*);
-#elif __STDC__
-extern bool_t xdr_groups(XDR *, groups*);
-#else /* Old Style C */
-bool_t xdr_groups();
-#endif /* Old Style C */
-
-
-struct groupnode {
- name gr_name;
- groups gr_next;
-};
-typedef struct groupnode groupnode;
-#ifdef __cplusplus
-extern "C" bool_t xdr_groupnode(XDR *, groupnode*);
-#elif __STDC__
-extern bool_t xdr_groupnode(XDR *, groupnode*);
-#else /* Old Style C */
-bool_t xdr_groupnode();
-#endif /* Old Style C */
-
-
-typedef struct exportnode *exports;
-#ifdef __cplusplus
-extern "C" bool_t xdr_exports(XDR *, exports*);
-#elif __STDC__
-extern bool_t xdr_exports(XDR *, exports*);
-#else /* Old Style C */
-bool_t xdr_exports();
-#endif /* Old Style C */
-
-
-struct exportnode {
- dirpath ex_dir;
- groups ex_groups;
- exports ex_next;
-};
-typedef struct exportnode exportnode;
-#ifdef __cplusplus
-extern "C" bool_t xdr_exportnode(XDR *, exportnode*);
-#elif __STDC__
-extern bool_t xdr_exportnode(XDR *, exportnode*);
-#else /* Old Style C */
-bool_t xdr_exportnode();
-#endif /* Old Style C */
-
-
-#define MOUNTPROG ((u_long)100005)
-#define MOUNTVERS ((u_long)1)
-
-#ifdef __cplusplus
-#define MOUNTPROC_NULL ((u_long)0)
-extern "C" void * mountproc_null_1(void *, CLIENT *);
-extern "C" void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern "C" fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern "C" fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern "C" mountlist * mountproc_dump_1(void *, CLIENT *);
-extern "C" mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern "C" void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern "C" void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern "C" void * mountproc_umntall_1(void *, CLIENT *);
-extern "C" void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern "C" exports * mountproc_export_1(void *, CLIENT *);
-extern "C" exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern "C" exports * mountproc_exportall_1(void *, CLIENT *);
-extern "C" exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#elif __STDC__
-#define MOUNTPROC_NULL ((u_long)0)
-extern void * mountproc_null_1(void *, CLIENT *);
-extern void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern mountlist * mountproc_dump_1(void *, CLIENT *);
-extern mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern void * mountproc_umntall_1(void *, CLIENT *);
-extern void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern exports * mountproc_export_1(void *, CLIENT *);
-extern exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern exports * mountproc_exportall_1(void *, CLIENT *);
-extern exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#else /* Old Style C */
-#define MOUNTPROC_NULL ((u_long)0)
-extern void * mountproc_null_1();
-extern void * mountproc_null_1_svc();
-#define MOUNTPROC_MNT ((u_long)1)
-extern fhstatus * mountproc_mnt_1();
-extern fhstatus * mountproc_mnt_1_svc();
-#define MOUNTPROC_DUMP ((u_long)2)
-extern mountlist * mountproc_dump_1();
-extern mountlist * mountproc_dump_1_svc();
-#define MOUNTPROC_UMNT ((u_long)3)
-extern void * mountproc_umnt_1();
-extern void * mountproc_umnt_1_svc();
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern void * mountproc_umntall_1();
-extern void * mountproc_umntall_1_svc();
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern exports * mountproc_export_1();
-extern exports * mountproc_export_1_svc();
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern exports * mountproc_exportall_1();
-extern exports * mountproc_exportall_1_svc();
-#endif /* Old Style C */
-
-#endif /* !_MOUNT_H_RPCGEN */
diff --git a/mdk-stage1/network.c b/mdk-stage1/network.c
deleted file mode 100644
index 3d3107ddf..000000000
--- a/mdk-stage1/network.c
+++ /dev/null
@@ -1,833 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <arpa/inet.h>
-#include <net/route.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <stdio.h>
-#include <netdb.h>
-#include <resolv.h>
-
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-#include "automatic.h"
-#include "dhcp.h"
-#include "adsl.h"
-#include "url.h"
-#include "dns.h"
-
-#include "network.h"
-
-
-static void error_message_net(void) /* reduce code size */
-{
- stg1_error_message("Could not configure network.");
-}
-
-
-int configure_net_device(struct interface_info * intf)
-{
- struct ifreq req;
- struct rtentry route;
- int s;
- struct sockaddr_in addr;
- struct in_addr ia;
- char ip[20], nm[20], nw[20], bc[20];
-
- addr.sin_family = AF_INET;
- addr.sin_port = 0;
-
- memcpy(&ia, &intf->ip, sizeof(intf->ip));
- strcpy(ip, inet_ntoa(ia));
-
- memcpy(&ia, &intf->netmask, sizeof(intf->netmask));
- strcpy(nm, inet_ntoa(ia));
-
- memcpy(&ia, &intf->broadcast, sizeof(intf->broadcast));
- strcpy(bc, inet_ntoa(ia));
-
- memcpy(&ia, &intf->network, sizeof(intf->network));
- strcpy(nw, inet_ntoa(ia));
-
- log_message("configuring device %s ip: %s nm: %s nw: %s bc: %s", intf->device, ip, nm, nw, bc);
-
- if (IS_TESTING)
- return 0;
-
- s = socket(AF_INET, SOCK_DGRAM, 0);
- if (s < 0) {
- log_perror("socket");
- error_message_net();
- return 1;
- }
-
- strcpy(req.ifr_name, intf->device);
-
- if (intf->is_up == 1) {
- log_message("interface already up, downing before reconfigure");
-
- req.ifr_flags = 0;
- if (ioctl(s, SIOCSIFFLAGS, &req)) {
- close(s);
- log_perror("SIOCSIFFLAGS (downing)");
- error_message_net();
- return 1;
- }
- }
-
- /* sets IP address */
- addr.sin_port = 0;
- memcpy(&addr.sin_addr, &intf->ip, sizeof(intf->ip));
- memcpy(&req.ifr_addr, &addr, sizeof(addr));
- if (ioctl(s, SIOCSIFADDR, &req)) {
- close(s);
- log_perror("SIOCSIFADDR");
- error_message_net();
- return 1;
- }
-
- /* sets broadcast */
- memcpy(&addr.sin_addr, &intf->broadcast, sizeof(intf->broadcast));
- memcpy(&req.ifr_broadaddr, &addr, sizeof(addr));
- if (ioctl(s, SIOCSIFBRDADDR, &req)) {
- close(s);
- log_perror("SIOCSIFBRDADDR");
- error_message_net();
- return 1;
- }
-
- /* sets netmask */
- memcpy(&addr.sin_addr, &intf->netmask, sizeof(intf->netmask));
- memcpy(&req.ifr_netmask, &addr, sizeof(addr));
- if (ioctl(s, SIOCSIFNETMASK, &req)) {
- close(s);
- log_perror("SIOCSIFNETMASK");
- error_message_net();
- return 1;
- }
-
- if (intf->is_ptp)
- req.ifr_flags = IFF_UP | IFF_RUNNING | IFF_POINTOPOINT | IFF_NOARP;
- else
- req.ifr_flags = IFF_UP | IFF_RUNNING | IFF_BROADCAST;
-
- /* brings up networking! */
- if (ioctl(s, SIOCSIFFLAGS, &req)) {
- close(s);
- log_perror("SIOCSIFFLAGS (upping)");
- error_message_net();
- return 1;
- }
-
- memset(&route, 0, sizeof(route));
- route.rt_dev = intf->device;
- route.rt_flags = RTF_UP;
-
- memcpy(&addr.sin_addr, &intf->network, sizeof(intf->network));
- memcpy(&route.rt_dst, &addr, sizeof(addr));
-
- memcpy(&addr.sin_addr, &intf->netmask, sizeof(intf->netmask));
- memcpy(&route.rt_genmask, &addr, sizeof(addr));
-
- /* adds route */
- if (ioctl(s, SIOCADDRT, &route)) {
- close(s);
- log_perror("SIOCADDRT");
- error_message_net();
- return 1;
- }
-
- close(s);
-
- intf->is_up = 1;
-
- if (intf->boot_proto != BOOTPROTO_DHCP && !streq(intf->device, "lo")) {
- /* I need to sleep a bit in order for kernel to finish
- init of the network device; if not, first sendto() for
- gethostbyaddr will get an EINVAL. */
- wait_message("Bringing up networking...");
- sleep(2);
- remove_wait_message();
- }
-
- return 0;
-}
-
-/* host network informations */
-char * hostname = NULL;
-char * domain = NULL;
-struct in_addr gateway = { 0 };
-struct in_addr dns_server = { 0 };
-struct in_addr dns_server2 = { 0 };
-
-static int add_default_route(void)
-{
- int s;
- struct rtentry route;
- struct sockaddr_in addr;
-
- if (IS_TESTING)
- return 0;
-
- if (gateway.s_addr == 0) {
- log_message("no gateway provided, can't add default route");
- return 0;
- }
-
- s = socket(AF_INET, SOCK_DGRAM, 0);
- if (s < 0) {
- close(s);
- log_perror("socket");
- error_message_net();
- return 1;
- }
-
- memset(&route, 0, sizeof(route));
-
- addr.sin_family = AF_INET;
- addr.sin_port = 0;
- addr.sin_addr = gateway;
- memcpy(&route.rt_gateway, &addr, sizeof(addr));
-
- addr.sin_addr.s_addr = INADDR_ANY;
- memcpy(&route.rt_dst, &addr, sizeof(addr));
- memcpy(&route.rt_genmask, &addr, sizeof(addr));
-
- route.rt_flags = RTF_UP | RTF_GATEWAY;
- route.rt_metric = 0;
-
- if (ioctl(s, SIOCADDRT, &route)) {
- close(s);
- log_perror("SIOCADDRT");
- error_message_net();
- return 1;
- }
-
- close(s);
-
- return 0;
-}
-
-
-static int write_resolvconf(void) {
- char * filename = "/etc/resolv.conf";
- FILE * f;
-
- if (dns_server.s_addr == 0) {
- log_message("resolvconf needs a dns server");
- return -1;
- }
-
- f = fopen(filename, "w");
- if (!f) {
- log_perror(filename);
- return -1;
- }
-
- if (domain)
- fprintf(f, "search %s\n", domain); /* we can live without the domain search (user will have to enter fully-qualified names) */
- fprintf(f, "nameserver %s\n", inet_ntoa(dns_server));
- if (dns_server2.s_addr != 0)
- fprintf(f, "nameserver %s\n", inet_ntoa(dns_server2));
-
- fclose(f);
- res_init(); /* reinit the resolver so DNS changes take affect */
-
- return 0;
-}
-
-
-static int save_netinfo(struct interface_info * intf) {
- char * file_network = "/tmp/network";
- char file_intf[500];
- FILE * f;
-
- f = fopen(file_network, "w");
- if (!f) {
- log_perror(file_network);
- return -1;
- }
-
- fprintf(f, "NETWORKING=yes\n");
- fprintf(f, "FORWARD_IPV4=false\n");
-
- if (hostname)
- fprintf(f, "HOSTNAME=%s\n", hostname);
- if (domain)
- fprintf(f, "DOMAINNAME=%s\n", domain);
- if (dhcp_hostname && !streq(dhcp_hostname, ""))
- fprintf(f, "DHCP_HOSTNAME=%s\n", dhcp_hostname);
-
- if (gateway.s_addr != 0)
- fprintf(f, "GATEWAY=%s\n", inet_ntoa(gateway));
-
- fclose(f);
-
-
- strcpy(file_intf, "/tmp/ifcfg-");
- strcat(file_intf, intf->device);
-
- f = fopen(file_intf, "w");
- if (!f) {
- log_perror(file_intf);
- return -1;
- }
-
- fprintf(f, "DEVICE=%s\n", intf->device);
-
- if (intf->boot_proto == BOOTPROTO_DHCP)
- fprintf(f, "BOOTPROTO=dhcp\n");
- else if (intf->boot_proto == BOOTPROTO_STATIC) {
- fprintf(f, "BOOTPROTO=static\n");
- fprintf(f, "IPADDR=%s\n", inet_ntoa(intf->ip));
- fprintf(f, "NETMASK=%s\n", inet_ntoa(intf->netmask));
- fprintf(f, "NETWORK=%s\n", inet_ntoa(intf->network));
- fprintf(f, "BROADCAST=%s\n", inet_ntoa(intf->broadcast));
- } else if (intf->boot_proto == BOOTPROTO_ADSL_PPPOE) {
- fprintf(f, "BOOTPROTO=adsl_pppoe\n");
- fprintf(f, "USER=%s\n", intf->user);
- fprintf(f, "PASS=%s\n", intf->pass);
- }
-
- fclose(f);
-
- return 0;
-}
-
-
-char * guess_netmask(char * ip_addr)
-{
- struct in_addr addr;
- unsigned long int tmp;
-
- if (streq(ip_addr, "") || !inet_aton(ip_addr, &addr))
- return "";
-
- log_message("guessing netmask");
-
- tmp = ntohl(addr.s_addr);
-
- if (((tmp & 0xFF000000) >> 24) <= 127)
- return "255.0.0.0";
- else if (((tmp & 0xFF000000) >> 24) <= 191)
- return "255.255.0.0";
- else
- return "255.255.255.0";
-}
-
-
-static void static_ip_callback(char ** strings)
-{
- struct in_addr addr;
-
- if (!inet_aton(strings[0], &addr))
- return;
-
- if (!strcmp(strings[1], "")) {
- char * ptr;
- strings[1] = strdup(strings[0]);
- ptr = strrchr(strings[1], '.');
- if (ptr)
- *(ptr+1) = '\0';
- }
-
- if (!strcmp(strings[2], ""))
- strings[2] = strdup(strings[1]);
-
- if (!strcmp(strings[3], ""))
- strings[3] = strdup(guess_netmask(strings[0]));
-}
-
-
-static enum return_type setup_network_interface(struct interface_info * intf)
-{
- enum return_type results;
- char * bootprotos[] = { "Static", "DHCP", "ADSL", NULL };
- char * bootprotos_auto[] = { "static", "dhcp", "adsl" };
- char * choice;
-
- results = ask_from_list_auto("Please choose the desired IP attribution.", bootprotos, &choice, "network", bootprotos_auto);
- if (results != RETURN_OK)
- return results;
-
- if (!strcmp(choice, "Static")) {
- char * questions[] = { "IP of this machine", "IP of DNS", "IP of default gateway", "Netmask", NULL };
- char * questions_auto[] = { "ip", "dns", "gateway", "netmask" };
- static char ** answers = NULL;
- struct in_addr addr;
-
- results = ask_from_entries_auto("Please enter the network information. (leave netmask blank for Internet standard)",
- questions, &answers, 16, questions_auto, static_ip_callback);
- if (results != RETURN_OK)
- return setup_network_interface(intf);
-
- if (streq(answers[0], "") || !inet_aton(answers[0], &addr)) {
- stg1_error_message("Invalid IP address.");
- return setup_network_interface(intf);
- }
- memcpy(&intf->ip, &addr, sizeof(addr));
-
- if (!inet_aton(answers[1], &dns_server)) {
- log_message("invalid DNS");
- dns_server.s_addr = 0; /* keep an understandable state */
- }
-
- if (!inet_aton(answers[2], &gateway)) {
- log_message("invalid gateway");
- gateway.s_addr = 0; /* keep an understandable state */
- }
-
- if ((streq(answers[3], "") && inet_aton(guess_netmask(answers[0]), &addr))
- || inet_aton(answers[3], &addr))
- memcpy(&intf->netmask, &addr, sizeof(addr));
- else {
- stg1_error_message("Invalid netmask.");
- return setup_network_interface(intf);
- }
-
- *((uint32_t *) &intf->broadcast) = (*((uint32_t *) &intf->ip) &
- *((uint32_t *) &intf->netmask)) | ~(*((uint32_t *) &intf->netmask));
-
- inet_aton("255.255.255.255", &addr);
- if (!memcmp(&addr, &intf->netmask, sizeof(addr))) {
- log_message("netmask is 255.255.255.255 -> point to point device");
- intf->network = gateway;
- intf->is_ptp = 1;
- } else {
- *((uint32_t *) &intf->network) = *((uint32_t *) &intf->ip) & *((uint32_t *) &intf->netmask);
- intf->is_ptp = 0;
- }
- intf->boot_proto = BOOTPROTO_STATIC;
-
- if (configure_net_device(intf))
- return RETURN_ERROR;
-
- } else if (streq(choice, "DHCP")) {
- results = perform_dhcp(intf);
-
- if (results == RETURN_BACK)
- return setup_network_interface(intf);
- if (results == RETURN_ERROR)
- return results;
- intf->boot_proto = BOOTPROTO_DHCP;
-
- if (configure_net_device(intf))
- return RETURN_ERROR;
-
- } else if (streq(choice, "ADSL")) {
- results = perform_adsl(intf);
-
- if (results == RETURN_BACK)
- return setup_network_interface(intf);
- if (results == RETURN_ERROR)
- return results;
- } else
- return RETURN_ERROR;
-
- return add_default_route();
-}
-
-
-static enum return_type configure_network(struct interface_info * intf)
-{
- char * dnshostname;
-
- if (hostname && domain)
- return RETURN_OK;
-
- dnshostname = mygethostbyaddr(inet_ntoa(intf->ip));
-
- if (dnshostname) {
- hostname = strdup(dnshostname);
- domain = strchr(strdup(hostname), '.') + 1;
- log_message("got hostname and domain from dns entry, %s and %s", hostname, domain);
- return RETURN_OK;
- }
-
- log_message("reverse name lookup on self failed");
-
- if (domain)
- return RETURN_OK;
-
- if (dns_server.s_addr != 0) {
- wait_message("Trying to resolve dns...");
- dnshostname = mygethostbyaddr(inet_ntoa(dns_server));
- remove_wait_message();
- }
-
- if (dnshostname) {
- domain = strchr(strdup(dnshostname), '.') + 1;
- log_message("got domain from DNS fullname, %s", domain);
- } else {
- enum return_type results;
- char * questions[] = { "Host name", "Domain name", NULL };
- char * questions_auto[] = { "hostname", "domain" };
- static char ** answers = NULL;
- char * boulet;
-
- log_message("reverse name lookup on DNS failed");
-
- results = ask_from_entries_auto("I could not guess hostname and domain name; please fill in this information. "
- "Valid answers are for example: `mybox' for hostname and `mynetwork.com' for "
- "domain name, for a machine called `mybox.mynetwork.com' on the Internet.",
- questions, &answers, 32, questions_auto, NULL);
- if (results != RETURN_OK)
- return results;
-
- hostname = answers[0];
- if ((boulet = strchr(hostname, '.')) != NULL)
- boulet[0] = '\0';
- domain = answers[1];
- }
-
- return RETURN_OK;
-}
-
-
-static enum return_type bringup_networking(struct interface_info * intf)
-{
- static struct interface_info loopback;
- enum return_type results = RETURN_ERROR;
-
- my_insmod("af_packet", ANY_DRIVER_TYPE, NULL);
-
- while (results != RETURN_OK) {
- results = setup_network_interface(intf);
- if (results != RETURN_OK)
- return results;
- write_resolvconf();
- results = configure_network(intf);
- }
-
- write_resolvconf(); /* maybe we have now domain to write also */
-
- if (loopback.is_up == 0) {
- int rc;
- strcpy(loopback.device, "lo");
- loopback.is_ptp = 0;
- loopback.is_up = 0;
- loopback.ip.s_addr = htonl(0x7f000001);
- loopback.netmask.s_addr = htonl(0xff000000);
- loopback.broadcast.s_addr = htonl(0x7fffffff);
- loopback.network.s_addr = htonl(0x7f000000);
- rc = configure_net_device(&loopback);
- if (rc)
- return RETURN_ERROR;
- }
-
- return RETURN_OK;
-}
-
-
-static char * interface_select(void)
-{
- char ** interfaces, ** ptr;
- char * descriptions[50];
- char * choice;
- int i, count = 0;
- enum return_type results;
-
- interfaces = get_net_devices();
-
- ptr = interfaces;
- while (ptr && *ptr) {
- count++;
- ptr++;
- }
-
- if (count == 0) {
- stg1_error_message("No NET device found.\n"
- "Hint: if you're using a Laptop, note that PCMCIA Network adapters are now supported either with `pcmcia.img' or `network.img', please try both these bootdisks.");
- i = ask_insmod(NETWORK_DEVICES);
- if (i == RETURN_BACK)
- return NULL;
- return interface_select();
- }
-
- if (count == 1)
- return *interfaces;
-
- i = 0;
- while (interfaces[i]) {
- descriptions[i] = get_net_intf_description(interfaces[i]);
- i++;
- }
-
- results = ask_from_list_comments_auto("Please choose the NET device to use for the installation.",
- interfaces, descriptions, &choice, "interface", interfaces);
-
- if (results != RETURN_OK)
- return NULL;
-
- return choice;
-}
-
-
-
-/* -=-=-- */
-
-
-static enum return_type intf_select_and_up(void)
-{
- static struct interface_info intf[20];
- static int num_interfaces = 0;
- struct interface_info * sel_intf = NULL;
- int i;
- enum return_type results;
- char * iface = interface_select();
-
- if (iface == NULL)
- return RETURN_BACK;
-
- for (i = 0; i < num_interfaces ; i++)
- if (!strcmp(intf[i].device, iface))
- sel_intf = &(intf[i]);
-
- if (sel_intf == NULL) {
- sel_intf = &(intf[num_interfaces]);
- strcpy(sel_intf->device, iface);
- sel_intf->is_up = 0;
- num_interfaces++;
- }
-
- results = bringup_networking(sel_intf);
-
- if (results == RETURN_OK)
- save_netinfo(sel_intf);
-
- return results;
-}
-
-
-
-enum return_type nfs_prepare(void)
-{
- char * questions[] = { "NFS server name", DISTRIB_NAME " directory", NULL };
- char * questions_auto[] = { "server", "directory", NULL };
- static char ** answers = NULL;
- char * nfsmount_location;
- enum return_type results = intf_select_and_up();
-
- if (results != RETURN_OK)
- return results;
-
- do {
- results = ask_from_entries_auto("Please enter the name or IP address of your NFS server, "
- "and the directory containing the " DISTRIB_NAME " Distribution.",
- questions, &answers, 40, questions_auto, NULL);
- if (results != RETURN_OK || streq(answers[0], "")) {
- unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
- return nfs_prepare();
- }
-
- nfsmount_location = malloc(strlen(answers[0]) + strlen(answers[1]) + 2);
- strcpy(nfsmount_location, answers[0]);
- strcat(nfsmount_location, ":");
- strcat(nfsmount_location, answers[1]);
-
- if (my_mount(nfsmount_location, IMAGE_LOCATION, "nfs", 0) == -1) {
- stg1_error_message("I can't mount the directory from the NFS server.");
- results = RETURN_BACK;
- continue;
- }
-
- if (access(IMAGE_LOCATION LIVE_LOCATION, R_OK)) {
- stg1_error_message("That NFS volume does not seem to contain the " DISTRIB_NAME " Distribution.");
- umount(IMAGE_LOCATION);
- results = RETURN_BACK;
- }
- }
- while (results == RETURN_BACK);
-
- log_message("found the " DISTRIB_NAME " Installation, good news!");
-
- if (IS_SPECIAL_STAGE2) {
- if (load_ramdisk() != RETURN_OK) {
- stg1_error_message("Could not load program into memory.");
- return nfs_prepare();
- }
- }
-
- if (IS_RESCUE)
- umount(IMAGE_LOCATION);
-
- method_name = strdup("nfs");
- return RETURN_OK;
-}
-
-
-enum return_type ftp_prepare(void)
-{
- char * questions[] = { "FTP server", DISTRIB_NAME " directory", "Login", "Password", NULL };
- char * questions_auto[] = { "server", "directory", "user", "pass", NULL };
- static char ** answers = NULL;
- enum return_type results;
-
- if (!ramdisk_possible()) {
- stg1_error_message("FTP install needs more than %d Mbytes of memory (detected %d Mbytes).",
- MEM_LIMIT_RAMDISK, total_memory());
- return RETURN_ERROR;
- }
-
- results = intf_select_and_up();
-
- if (results != RETURN_OK)
- return results;
-
- do {
- char location_full[500];
- int ftp_serv_response;
- int fd, size;
-
- results = ask_from_entries_auto("Please enter the name or IP address of the FTP server, "
- "the directory containing the " DISTRIB_NAME " Distribution, "
- "and the login/pass if necessary (leave login blank for anonymous).",
- questions, &answers, 40, questions_auto, NULL);
- if (results != RETURN_OK || streq(answers[0], "")) {
- unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
- return ftp_prepare();
- }
-
- log_message("FTP: trying to connect to %s", answers[0]);
-
- ftp_serv_response = ftp_open_connection(answers[0], answers[2], answers[3], "");
- if (ftp_serv_response < 0) {
- log_message("FTP: error connect %d", ftp_serv_response);
- if (ftp_serv_response == FTPERR_BAD_HOSTNAME)
- stg1_error_message("Error: bad hostname.");
- else if (ftp_serv_response == FTPERR_FAILED_CONNECT)
- stg1_error_message("Error: failed to connect to remote host.");
- else
- stg1_error_message("Error: couldn't connect.");
- results = RETURN_BACK;
- continue;
- }
- strcpy(location_full, answers[1]);
- strcat(location_full, get_ramdisk_realname());
-
- log_message("FTP: trying to retrieve %s", location_full);
-
- fd = ftp_start_download(ftp_serv_response, location_full, &size);
- if (fd < 0) {
- log_message("FTP: error get %d", fd);
- if (fd == FTPERR_PASSIVE_ERROR)
- stg1_error_message("Error: error with passive connection.");
- else if (fd == FTPERR_FILE_NOT_FOUND)
- stg1_error_message("Error: file not found (%s).", location_full);
- else if (fd == FTPERR_BAD_SERVER_RESPONSE)
- stg1_error_message("Error: bad server response (server too busy?).");
- else
- stg1_error_message("Error: couldn't retrieve Installation program.");
- results = RETURN_BACK;
- continue;
- }
-
- log_message("FTP: size of download %d bytes", size);
-
- results = load_ramdisk_fd(fd, size);
- if (results == RETURN_OK)
- ftp_end_data_command(ftp_serv_response);
- else
- return results;
-
- method_name = strdup("ftp");
- add_to_env("HOST", answers[0]);
- add_to_env("PREFIX", answers[1]);
- if (strcmp(answers[2], "")) {
- add_to_env("LOGIN", answers[2]);
- add_to_env("PASSWORD", answers[3]);
- }
- }
- while (results == RETURN_BACK);
-
- return RETURN_OK;
-}
-
-enum return_type http_prepare(void)
-{
- char * questions[] = { "HTTP server", DISTRIB_NAME " directory", NULL };
- char * questions_auto[] = { "server", "directory", NULL };
- static char ** answers = NULL;
- enum return_type results;
-
- if (!ramdisk_possible()) {
- stg1_error_message("HTTP install needs more than %d Mbytes of memory (detected %d Mbytes).",
- MEM_LIMIT_RAMDISK, total_memory());
- return RETURN_ERROR;
- }
-
- results = intf_select_and_up();
-
- if (results != RETURN_OK)
- return results;
-
- do {
- char location_full[500];
- int fd, size;
-
- results = ask_from_entries_auto("Please enter the name or IP address of the HTTP server, "
- "and the directory containing the " DISTRIB_NAME " Distribution.",
- questions, &answers, 40, questions_auto, NULL);
- if (results != RETURN_OK || streq(answers[0], "")) {
- unset_param(MODE_AUTOMATIC); /* we are in a fallback mode */
- return http_prepare();
- }
-
- strcpy(location_full, answers[1]);
- strcat(location_full, get_ramdisk_realname());
-
- log_message("HTTP: trying to retrieve %s from %s", location_full, answers[0]);
-
- fd = http_download_file(answers[0], location_full, &size);
- if (fd < 0) {
- log_message("HTTP: error %d", fd);
- if (fd == FTPERR_FAILED_CONNECT)
- stg1_error_message("Error: couldn't connect to server.");
- else
- stg1_error_message("Error: couldn't get file (%s).", location_full);
- results = RETURN_BACK;
- continue;
- }
-
- log_message("HTTP: size of download %d bytes", size);
-
- if (load_ramdisk_fd(fd, size) != RETURN_OK)
- return RETURN_ERROR;
-
- method_name = strdup("http");
- sprintf(location_full, "http://%s/%s", answers[0], answers[1]);
- add_to_env("URLPREFIX", location_full);
- }
- while (results == RETURN_BACK);
-
- return RETURN_OK;
-
-}
diff --git a/mdk-stage1/network.h b/mdk-stage1/network.h
deleted file mode 100644
index 02eea45b6..000000000
--- a/mdk-stage1/network.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#ifndef _NETWORK_H_
-#define _NETWORK_H_
-
-#include <netinet/in.h>
-#include <netinet/ip.h>
-#include <arpa/inet.h>
-
-
-enum return_type nfs_prepare(void);
-enum return_type ftp_prepare(void);
-enum return_type http_prepare(void);
-
-
-enum boot_proto_type { BOOTPROTO_STATIC, BOOTPROTO_DHCP, BOOTPROTO_ADSL_PPPOE };
-
-/* all of these in_addr things are in network byte order! */
-struct interface_info {
- char device[10];
- int is_ptp, is_up;
- struct in_addr ip, netmask, broadcast, network;
- enum boot_proto_type boot_proto;
- char *user, *pass; /* for ADSL connection */
-};
-
-
-/* these are to be used only by dhcp.c */
-
-char * guess_netmask(char * ip_addr);
-
-int configure_net_device(struct interface_info * intf);
-
-extern char * hostname;
-extern char * domain;
-extern struct in_addr gateway;
-extern struct in_addr dns_server;
-extern struct in_addr dns_server2;
-
-
-
-#endif
diff --git a/mdk-stage1/newt-frontend.c b/mdk-stage1/newt-frontend.c
deleted file mode 100644
index f50defee1..000000000
--- a/mdk-stage1/newt-frontend.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-
-/*
- * Each different frontend must implement all functions defined in frontend.h
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <sys/time.h>
-#include "newt/newt.h"
-
-#include "frontend.h"
-
-void init_frontend(char * welcome_msg)
-{
- int i;
- for (i=0; i<38; i++) printf("\n");
- newtInit();
- newtCls();
-
- newtDrawRootText(0, 0, welcome_msg);
-
- newtPushHelpLine(" <Alt-F1> for here, <Alt-F3> to see the logs, <Alt-F4> for kernel msg");
- newtRefresh();
-}
-
-
-void finish_frontend(void)
-{
- newtFinished();
-}
-
-
-void verror_message(char *msg, va_list ap)
-{
- newtWinMessagev("Error", "Ok", msg, ap);
-}
-
-void vinfo_message(char *msg, va_list ap)
-{
- newtWinMessagev("Notice", "Ok", msg, ap);
-}
-
-
-void vwait_message(char *msg, va_list ap)
-{
- int width, height;
- char * title = "Please wait...";
- newtComponent c, f;
- newtGrid grid;
- char * buf = NULL;
- char * flowed;
- int size = 0;
- int i = 0;
-
- do {
- size += 1000;
- if (buf) free(buf);
- buf = malloc(size);
- i = vsnprintf(buf, size, msg, ap);
- } while (i >= size || i == -1);
-
- flowed = newtReflowText(buf, 60, 5, 5, &width, &height);
-
- c = newtTextbox(-1, -1, width, height, NEWT_TEXTBOX_WRAP);
- newtTextboxSetText(c, flowed);
-
- grid = newtCreateGrid(1, 1);
- newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, c, 0, 0, 0, 0, 0, 0);
- newtGridWrappedWindow(grid, title);
-
- free(flowed);
- free(buf);
-
- f = newtForm(NULL, NULL, 0);
- newtFormAddComponent(f, c);
-
- newtDrawForm(f);
- newtRefresh();
- newtFormDestroy(f);
-}
-
-void remove_wait_message(void)
-{
- newtPopWindow();
-}
-
-
-static newtComponent form = NULL, scale = NULL;
-static int size_progress;
-static int actually_drawn;
-static char * msg_progress;
-
-void init_progression(char *msg, int size)
-{
- size_progress = size;
- if (size) {
- actually_drawn = 0;
- newtCenteredWindow(70, 5, "Please wait...");
- form = newtForm(NULL, NULL, 0);
- newtFormAddComponent(form, newtLabel(1, 1, msg));
- scale = newtScale(1, 3, 68, size);
- newtFormAddComponent(form, scale);
- newtDrawForm(form);
- newtRefresh();
- }
- else {
- wait_message(msg);
- msg_progress = msg;
- }
-}
-
-void update_progression(int current_size)
-{
- if (size_progress) {
- if (current_size <= size_progress)
- newtScaleSet(scale, current_size);
- newtRefresh();
- }
- else {
- struct timeval t;
- int time;
- static int last_time = -1;
- gettimeofday(&t, NULL);
- time = t.tv_sec*3 + t.tv_usec/300000;
- if (time != last_time) {
- char msg_prog_final[500];
- sprintf(msg_prog_final, "%s (%d bytes read) ", msg_progress, current_size);
- remove_wait_message();
- wait_message(msg_prog_final);
- }
- last_time = time;
- }
-}
-
-void end_progression(void)
-{
- if (size_progress) {
- newtPopWindow();
- newtFormDestroy(form);
- }
- else
- remove_wait_message();
-}
-
-
-enum return_type ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice)
-{
- char * items[500];
- int answer = 0, rc;
- char ** sav_elems = elems;
- int i;
-
- i = 0;
- while (elems && *elems) {
- int j = (*elems_comments) ? strlen(*elems_comments) : 0;
- items[i] = malloc(sizeof(char) * (strlen(*elems) + j + 4));
- strcpy(items[i], *elems);
- if (*elems_comments) {
- strcat(items[i], " (");
- strcat(items[i], *elems_comments);
- strcat(items[i], ")");
- }
- elems_comments++;
- i++;
- elems++;
- }
- items[i] = NULL;
-
- rc = newtWinMenu("Please choose...", msg, 52, 5, 5, 7, items, &answer, "Ok", "Cancel", NULL);
-
- if (rc == 2)
- return RETURN_BACK;
-
- *choice = strdup(sav_elems[answer]);
-
- return RETURN_OK;
-}
-
-
-enum return_type ask_from_list(char *msg, char ** elems, char ** choice)
-{
- int answer = 0, rc;
-
- rc = newtWinMenu("Please choose...", msg, 52, 5, 5, 7, elems, &answer, "Ok", "Cancel", NULL);
-
- if (rc == 2)
- return RETURN_BACK;
-
- *choice = strdup(elems[answer]);
-
- return RETURN_OK;
-}
-
-
-enum return_type ask_yes_no(char *msg)
-{
- int rc;
-
- rc = newtWinTernary("Please answer...", "Yes", "No", "Back", msg);
-
- if (rc == 1)
- return RETURN_OK;
- else if (rc == 3)
- return RETURN_BACK;
- else return RETURN_ERROR;
-}
-
-
-static void (*callback_real_function)(char ** strings) = NULL;
-
-static void default_callback(newtComponent co __attribute__ ((unused)), void * data)
-{
- newtComponent * entries = data;
- char * strings[50], ** ptr;
-
- if (!callback_real_function)
- return;
-
- ptr = strings;
- while (entries && *entries) {
- *ptr = newtEntryGetValue(*entries);
- entries++;
- ptr++;
- }
-
- callback_real_function(strings);
-
- ptr = strings;
- entries = data;
- while (entries && *entries) {
- newtEntrySet(*entries, strdup(*ptr), 1);
- entries++;
- ptr++;
- }
-}
-
-/* only supports up to 50 buttons and entries -- shucks! */
-static int mynewtWinEntries(char * title, char * text, int suggestedWidth, int flexDown,
- int flexUp, int dataWidth, void (*callback_func)(char ** strings),
- struct newtWinEntry * items, char * button1, ...) {
- newtComponent buttons[50], result, form, textw;
- newtGrid grid, buttonBar, subgrid;
- int numItems;
- int rc, i;
- int numButtons;
- char * buttonName;
- newtComponent entries[50];
-
- va_list args;
-
- textw = newtTextboxReflowed(-1, -1, text, suggestedWidth, flexDown,
- flexUp, 0);
-
- for (numItems = 0; items[numItems].text; numItems++);
-
- buttonName = button1, numButtons = 0;
- va_start(args, button1);
- while (buttonName) {
- buttons[numButtons] = newtButton(-1, -1, buttonName);
- numButtons++;
- buttonName = va_arg(args, char *);
- }
-
- va_end(args);
-
- buttonBar = newtCreateGrid(numButtons, 1);
- for (i = 0; i < numButtons; i++) {
- newtGridSetField(buttonBar, i, 0, NEWT_GRID_COMPONENT,
- buttons[i],
- i ? 1 : 0, 0, 0, 0, 0, 0);
- }
-
- if (callback_func) {
- callback_real_function = callback_func;
- entries[numItems] = NULL;
- }
- else
- callback_real_function = NULL;
-
- subgrid = newtCreateGrid(2, numItems);
- for (i = 0; i < numItems; i++) {
- newtComponent entr = newtEntry(-1, -1, items[i].value ?
- *items[i].value : NULL, dataWidth,
- items[i].value, items[i].flags);
-
- newtGridSetField(subgrid, 0, i, NEWT_GRID_COMPONENT,
- newtLabel(-1, -1, items[i].text),
- 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
- newtGridSetField(subgrid, 1, i, NEWT_GRID_COMPONENT,
- entr,
- 1, 0, 0, 0, 0, 0);
- if (callback_func) {
- entries[i] = entr;
- newtComponentAddCallback(entr, default_callback, entries);
- }
- }
-
-
- grid = newtCreateGrid(1, 3);
- form = newtForm(NULL, 0, 0);
- newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, textw,
- 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
- newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, subgrid,
- 0, 1, 0, 0, 0, 0);
- newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttonBar,
- 0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
- newtGridAddComponentsToForm(grid, form, 1);
- newtGridWrappedWindow(grid, title);
- newtGridFree(grid, 1);
-
- result = newtRunForm(form);
-
- for (rc = 0; rc < numItems; rc++)
- *items[rc].value = strdup(*items[rc].value);
-
- for (rc = 0; result != buttons[rc] && rc < numButtons; rc++);
- if (rc == numButtons)
- rc = 0; /* F12 */
- else
- rc++;
-
- newtFormDestroy(form);
- newtPopWindow();
-
- return rc;
-}
-
-
-enum return_type ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings))
-{
- struct newtWinEntry entries[50];
- int j, i = 0;
- int rc;
- char ** already_answers = NULL;
-
- while (questions && *questions) {
- entries[i].text = *questions;
- entries[i].flags = NEWT_FLAG_SCROLL | (!strcmp(*questions, "Password") ? NEWT_FLAG_PASSWORD : 0);
- i++;
- questions++;
- }
- entries[i].text = NULL;
- entries[i].value = NULL;
-
- if (*answers == NULL)
- *answers = (char **) malloc(sizeof(char *) * i);
- else
- already_answers = *answers;
-
- for (j = 0 ; j < i ; j++) {
- entries[j].value = &((*answers)[j]);
- if (already_answers && *already_answers) {
- *(entries[j].value) = *already_answers;
- already_answers++;
- } else
- *(entries[j].value) = NULL;
- }
-
- rc = mynewtWinEntries("Please fill in entries...", msg, 52, 5, 5, entry_size, callback_func, entries, "Ok", "Cancel", NULL);
-
- if (rc == 3)
- return RETURN_BACK;
- if (rc != 1)
- return RETURN_ERROR;
-
- return RETURN_OK;
-}
-
-
-void suspend_to_console(void) { newtSuspend(); }
-void resume_from_suspend(void) { newtResume(); }
diff --git a/mdk-stage1/newt/Makefile b/mdk-stage1/newt/Makefile
deleted file mode 100644
index 171bcf0cb..000000000
--- a/mdk-stage1/newt/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libnewt
-
-OBJS = newt.o button.o form.o checkbox.o entry.o label.o listbox.o scrollbar.o textbox.o scale.o grid.o windows.o buttonbar.o checkboxtree.o
-
-DEFS = -DVERSION=\"0.50.19\"
-
-INCS = -I../slang
-
-
-TARGETS = $(LIBNAME).a
-
-ifeq (DIETLIBC, $(L))
-TARGETS += $(LIBNAME)-DIET.a
-endif
-
-all: $(TARGETS)
-
-clean:
- rm -f *.o *.a
-
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-$(LIBNAME).a: $(OBJS)
- ar -cru $@ $^
- ranlib $@
-
-$(LIBNAME)-DIET.a: $(OBJS-DIET)
- ar -cru $@ $^
- ranlib $@
-
-$(OBJS): %.o: %.c
- gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
- gcc $(CFLAGS) $(DEFS) $(INCS) $(DIETLIBC_INCLUDES) -c $< -o $@
-
diff --git a/mdk-stage1/newt/button.c b/mdk-stage1/newt/button.c
deleted file mode 100644
index 1ff360dc5..000000000
--- a/mdk-stage1/newt/button.c
+++ /dev/null
@@ -1,190 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct button {
- char * text;
- int compact;
-};
-
-static void buttonDrawIt(newtComponent co, int active, int pushed);
-static void buttonDrawText(newtComponent co, int active, int pushed);
-
-static void buttonDraw(newtComponent c);
-static void buttonDestroy(newtComponent co);
-static struct eventResult buttonEvent(newtComponent c,
- struct event ev);
-static void buttonPlace(newtComponent co, int newLeft, int newTop);
-
-static struct componentOps buttonOps = {
- buttonDraw,
- buttonEvent,
- buttonDestroy,
- buttonPlace,
- newtDefaultMappedHandler,
-} ;
-
-static newtComponent createButton(int left, int row, const char * text, int compact) {
- newtComponent co;
- struct button * bu;
-
- co = malloc(sizeof(*co));
- bu = malloc(sizeof(struct button));
- co->data = bu;
-
- bu->text = strdup(text);
- bu->compact = compact;
- co->ops = &buttonOps;
-
- if (bu->compact) {
- co->height = 1;
- co->width = strlen(text) + 3;
- } else {
- co->height = 4;
- co->width = strlen(text) + 5;
- }
-
- co->top = row;
- co->left = left;
- co->takesFocus = 1;
- co->isMapped = 0;
-
- newtGotorc(co->top, co->left);
-
- return co;
-}
-
-newtComponent newtCompactButton(int left, int row, const char * text) {
- return createButton(left, row, text, 1);
-}
-
-newtComponent newtButton(int left, int row, const char * text) {
- return createButton(left, row, text, 0);
-}
-
-static void buttonDestroy(newtComponent co) {
- struct button * bu = co->data;
-
- free(bu->text);
- free(bu);
- free(co);
-}
-
-static void buttonPlace(newtComponent co, int newLeft, int newTop) {
- co->top = newTop;
- co->left = newLeft;
-
- newtGotorc(co->top, co->left);
-}
-
-static void buttonDraw(newtComponent co) {
- buttonDrawIt(co, 0, 0);
-}
-
-static void buttonDrawIt(newtComponent co, int active, int pushed) {
- struct button * bu = co->data;
-
- if (!co->isMapped) return;
-
- SLsmg_set_color(NEWT_COLORSET_BUTTON);
-
- if (bu->compact) {
- if (active)
- SLsmg_set_color(NEWT_COLORSET_COMPACTBUTTON);
- else
- SLsmg_set_color(NEWT_COLORSET_BUTTON);
- newtGotorc(co->top+ pushed, co->left + 1 + pushed);
- SLsmg_write_char('<');
- SLsmg_write_string(bu->text);
- SLsmg_write_char('>');
- } else {
- if (pushed) {
- SLsmg_set_color(NEWT_COLORSET_BUTTON);
- newtDrawBox(co->left + 1, co->top + 1, co->width - 1, 3, 0);
-
- SLsmg_set_color(NEWT_COLORSET_WINDOW);
- newtClearBox(co->left, co->top, co->width, 1);
- newtClearBox(co->left, co->top, 1, co->height);
- } else {
- newtDrawBox(co->left, co->top, co->width - 1, 3, 1);
- }
-
- buttonDrawText(co, active, pushed);
- }
-}
-
-static void buttonDrawText(newtComponent co, int active, int pushed) {
- struct button * bu = co->data;
-
- if (pushed) pushed = 1;
-
- if (active)
- SLsmg_set_color(NEWT_COLORSET_ACTBUTTON);
- else
- SLsmg_set_color(NEWT_COLORSET_BUTTON);
-
- newtGotorc(co->top + 1 + pushed, co->left + 1 + pushed);
- SLsmg_write_char(' ');
- SLsmg_write_string(bu->text);
- SLsmg_write_char(' ');
-}
-
-static struct eventResult buttonEvent(newtComponent co,
- struct event ev) {
- struct eventResult er;
- struct button * bu = co->data;
-
- if (ev.when == EV_NORMAL) {
- switch (ev.event) {
- case EV_FOCUS:
- buttonDrawIt(co, 1, 0);
- er.result = ER_SWALLOWED;
- break;
-
- case EV_UNFOCUS:
- buttonDrawIt(co, 0, 0);
- er.result = ER_SWALLOWED;
- break;
-
- case EV_KEYPRESS:
- if (ev.u.key == ' ' || ev.u.key == '\r') {
- if (!bu->compact) {
- /* look pushed */
- buttonDrawIt(co, 1, 1);
- newtRefresh();
- newtDelay(150000);
- buttonDrawIt(co, 1, 0);
- newtRefresh();
- newtDelay(150000);
- }
-
- er.result = ER_EXITFORM;
- } else
- er.result = ER_IGNORED;
- break;
- case EV_MOUSE:
- if (ev.u.mouse.type == MOUSE_BUTTON_DOWN &&
- co->top <= ev.u.mouse.y &&
- co->top + co->height - !bu->compact > ev.u.mouse.y &&
- co->left <= ev.u.mouse.x &&
- co->left + co->width - !bu->compact > ev.u.mouse.x) {
- if (!bu->compact) {
- buttonDrawIt(co, 1, 1);
- newtRefresh();
- newtDelay(150000);
- buttonDrawIt(co, 1, 0);
- newtRefresh();
- newtDelay(150000);
- }
- er.result = ER_EXITFORM;
- }
- break;
- }
- } else
- er.result = ER_IGNORED;
-
- return er;
-}
diff --git a/mdk-stage1/newt/buttonbar.c b/mdk-stage1/newt/buttonbar.c
deleted file mode 100644
index 45473c9d2..000000000
--- a/mdk-stage1/newt/buttonbar.c
+++ /dev/null
@@ -1,46 +0,0 @@
-#include <stdarg.h>
-
-#include "newt.h"
-
-/* if they try and pack more then 50 buttons, screw 'em */
-newtGrid newtButtonBarv(char * button1, newtComponent * b1comp, va_list args) {
- newtGrid grid;
- struct buttonInfo {
- char * name;
- newtComponent * compPtr;
- } buttons[50];
- int num;
- int i;
-
- buttons[0].name = button1, buttons[0].compPtr = b1comp, num = 1;
- while (1) {
- buttons[num].name = va_arg(args, char *);
- if (!buttons[num].name) break;
- buttons[num].compPtr = va_arg(args, newtComponent *);
- num++;
- }
-
- grid = newtCreateGrid(num, 1);
-
- for (i = 0; i < num; i++) {
- *buttons[i].compPtr = newtButton(-1, -1, buttons[i].name);
- newtGridSetField(grid, i, 0, NEWT_GRID_COMPONENT,
- *buttons[i].compPtr,
- num ? 1 : 0, 0, 0, 0, 0, 0);
- }
-
- return grid;
-}
-
-newtGrid newtButtonBar(char * button1, newtComponent * b1comp, ...) {
- va_list args;
- newtGrid grid;
-
- va_start(args, b1comp);
-
- grid = newtButtonBarv(button1, b1comp, args);
-
- va_end(args);
-
- return grid;
-}
diff --git a/mdk-stage1/newt/checkbox.c b/mdk-stage1/newt/checkbox.c
deleted file mode 100644
index eee514c98..000000000
--- a/mdk-stage1/newt/checkbox.c
+++ /dev/null
@@ -1,290 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-enum type { CHECK, RADIO };
-
-struct checkbox {
- char * text;
- char * seq;
- char * result;
- newtComponent prevButton, lastButton;
- enum type type;
- char value;
- int active, inactive;
- const void * data;
- int flags;
- int hasFocus;
-};
-
-static void makeActive(newtComponent co);
-
-static void cbDraw(newtComponent c);
-static void cbDestroy(newtComponent co);
-struct eventResult cbEvent(newtComponent co, struct event ev);
-
-static struct componentOps cbOps = {
- cbDraw,
- cbEvent,
- cbDestroy,
- newtDefaultPlaceHandler,
- newtDefaultMappedHandler,
-} ;
-
-newtComponent newtRadiobutton(int left, int top, const char * text, int isDefault,
- newtComponent prevButton) {
- newtComponent co;
- newtComponent curr;
- struct checkbox * rb;
- char initialValue;
-
- if (isDefault)
- initialValue = '*';
- else
- initialValue = ' ';
-
- co = newtCheckbox(left, top, text, initialValue, " *", NULL);
- rb = co->data;
- rb->type = RADIO;
-
- rb->prevButton = prevButton;
-
- for (curr = co; curr; curr = rb->prevButton) {
- rb = curr->data;
- rb->lastButton = co;
- }
-
- return co;
-}
-
-newtComponent newtRadioGetCurrent(newtComponent setMember) {
- struct checkbox * rb = setMember->data;
-
- setMember = rb->lastButton;
- rb = setMember->data;
-
- while (rb && rb->value != '*') {
- setMember = rb->prevButton;
- if (!setMember)
- return NULL;
- rb = setMember->data;
- }
-
- return setMember;
-}
-
-char newtCheckboxGetValue(newtComponent co) {
- struct checkbox * cb = co->data;
-
- return cb->value;
-}
-
-void newtCheckboxSetValue(newtComponent co, char value) {
- struct checkbox * cb = co->data;
-
- *cb->result = value;
- cbDraw(co);
-}
-
-newtComponent newtCheckbox(int left, int top, const char * text, char defValue,
- const char * seq, char * result) {
- newtComponent co;
- struct checkbox * cb;
-
- if (!seq) seq = " *";
-
- co = malloc(sizeof(*co));
- cb = malloc(sizeof(struct checkbox));
- co->data = cb;
- cb->flags = 0;
- if (result)
- cb->result = result;
- else
- cb->result = &cb->value;
-
- cb->text = strdup(text);
- cb->seq = strdup(seq);
- cb->type = CHECK;
- cb->hasFocus = 0;
- cb->inactive = COLORSET_CHECKBOX;
- cb->active = COLORSET_ACTCHECKBOX;
- defValue ? (*cb->result = defValue) : (*cb->result = cb->seq[0]);
-
- co->ops = &cbOps;
-
- co->callback = NULL;
- co->height = 1;
- co->width = strlen(text) + 4;
- co->top = top;
- co->left = left;
- co->takesFocus = 1;
-
- return co;
-}
-
-void newtCheckboxSetFlags(newtComponent co, int flags, enum newtFlagsSense sense) {
- struct checkbox * cb = co->data;
- int row, col;
-
- cb->flags = newtSetFlags(cb->flags, flags, sense);
-
- if (!(cb->flags & NEWT_FLAG_DISABLED))
- co->takesFocus = 1;
- else
- co->takesFocus = 0;
-
- newtGetrc(&row, &col);
- cbDraw(co);
- newtGotorc(row, col);
-}
-
-static void cbDraw(newtComponent c) {
- struct checkbox * cb = c->data;
-
- if (c->top == -1 || !c->isMapped) return;
-
- if (cb->flags & NEWT_FLAG_DISABLED) {
- cb->inactive = NEWT_COLORSET_DISENTRY;
- cb->active = NEWT_COLORSET_DISENTRY;
- } else {
- cb->inactive = COLORSET_CHECKBOX;
- cb->active = COLORSET_ACTCHECKBOX;
- }
-
- SLsmg_set_color(cb->inactive);
-
- newtGotorc(c->top, c->left);
-
- switch (cb->type) {
- case RADIO:
- SLsmg_write_string("( ) ");
- break;
-
- case CHECK:
- SLsmg_write_string("[ ] ");
- break;
-
- default:
- break;
- }
-
- SLsmg_write_string(cb->text);
-
- if (cb->hasFocus)
- SLsmg_set_color(cb->active);
-
- newtGotorc(c->top, c->left + 1);
- SLsmg_write_char(*cb->result);
-}
-
-static void cbDestroy(newtComponent co) {
- struct checkbox * cb = co->data;
-
- free(cb->text);
- free(cb->seq);
- free(cb);
- free(co);
-}
-
-struct eventResult cbEvent(newtComponent co, struct event ev) {
- struct checkbox * cb = co->data;
- struct eventResult er;
- const char * cur;
-
- if (ev.when == EV_NORMAL) {
- switch (ev.event) {
- case EV_FOCUS:
- cb->hasFocus = 1;
- cbDraw(co);
- er.result = ER_SWALLOWED;
- break;
-
- case EV_UNFOCUS:
- cb->hasFocus = 0;
- cbDraw(co);
- er.result = ER_SWALLOWED;
- break;
-
- case EV_KEYPRESS:
- if (ev.u.key == ' ') {
- if (cb->type == RADIO) {
- makeActive(co);
- } else if (cb->type == CHECK) {
- cur = strchr(cb->seq, *cb->result);
- if (!cur)
- *cb->result = *cb->seq;
- else {
- cur++;
- if (! *cur)
- *cb->result = *cb->seq;
- else
- *cb->result = *cur;
- }
- cbDraw(co);
- er.result = ER_SWALLOWED;
-
- if (co->callback)
- co->callback(co, co->callbackData);
- } else {
- er.result = ER_IGNORED;
- }
- } else if(ev.u.key == NEWT_KEY_ENTER) {
- er.result = ER_IGNORED;
- } else {
- er.result = ER_IGNORED;
- }
- break;
- case EV_MOUSE:
- if (ev.u.mouse.type == MOUSE_BUTTON_DOWN) {
- if (cb->type == RADIO) {
- makeActive(co);
- } else if (cb->type == CHECK) {
- cur = strchr(cb->seq, *cb->result);
- if (!cur)
- *cb->result = *cb->seq;
- else {
- cur++;
- if (! *cur)
- *cb->result = *cb->seq;
- else
- *cb->result = *cur;
- }
- cbDraw(co);
- er.result = ER_SWALLOWED;
-
- if (co->callback)
- co->callback(co, co->callbackData);
- }
- }
- }
- } else
- er.result = ER_IGNORED;
-
- return er;
-}
-
-static void makeActive(newtComponent co) {
- struct checkbox * cb = co->data;
- struct checkbox * rb;
- newtComponent curr;
-
- /* find the one that's turned off */
- curr = cb->lastButton;
- rb = curr->data;
- while (curr && rb->value == rb->seq[0]) {
- curr = rb->prevButton;
- if (curr) rb = curr->data;
- }
- if (curr) {
- rb->value = rb->seq[0];
- cbDraw(curr);
- }
- cb->value = cb->seq[1];
- cbDraw(co);
-
- if (co->callback)
- co->callback(co, co->callbackData);
-}
diff --git a/mdk-stage1/newt/checkboxtree.c b/mdk-stage1/newt/checkboxtree.c
deleted file mode 100644
index 00113f23e..000000000
--- a/mdk-stage1/newt/checkboxtree.c
+++ /dev/null
@@ -1,714 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct items {
- char * text;
- const void *data;
- unsigned char selected;
- struct items *next;
- struct items *prev;
- struct items *branch;
- int flags;
- int depth;
-};
-
-struct CheckboxTree {
- newtComponent sb;
- int curWidth; /* size of text w/o scrollbar or border*/
- int curHeight; /* size of text w/o border */
- struct items * itemlist;
- struct items ** flatList, ** currItem, ** firstItem;
- int flatCount;
- int flags;
- int pad;
- char * seq;
- char * result;
-};
-
-static void ctDraw(newtComponent c);
-static void ctDestroy(newtComponent co);
-static void ctPlace(newtComponent co, int newLeft, int newTop);
-struct eventResult ctEvent(newtComponent co, struct event ev);
-static void ctMapped(newtComponent co, int isMapped);
-static struct items * findItem(struct items * items, const void * data);
-static void buildFlatList(newtComponent co);
-static void doBuildFlatList(struct CheckboxTree * ct, struct items * item);
-enum countWhat { COUNT_EXPOSED=0, COUNT_SELECTED=1 };
-static int countItems(struct items * item, enum countWhat justExposed);
-
-static struct componentOps ctOps = {
- ctDraw,
- ctEvent,
- ctDestroy,
- ctPlace,
- ctMapped,
-} ;
-
-static int countItems(struct items * item, enum countWhat what) {
- int count = 0;
-
- while (item) {
- if ((!item->branch && item->selected == what) || (what == COUNT_EXPOSED))
- count++;
- if (item->branch || (what == COUNT_EXPOSED && item->selected))
- count += countItems(item->branch, what);
- item = item->next;
- }
-
- return count;
-}
-
-static void doBuildFlatList(struct CheckboxTree * ct, struct items * item) {
- while (item) {
- ct->flatList[ct->flatCount++] = item;
- if (item->branch && item->selected) doBuildFlatList(ct, item->branch);
- item = item->next;
- }
-}
-
-static void buildFlatList(newtComponent co) {
- struct CheckboxTree * ct = co->data;
-
- if (ct->flatList) free(ct->flatList);
- ct->flatCount = countItems(ct->itemlist, COUNT_EXPOSED);
-
- ct->flatList = malloc(sizeof(*ct->flatList) * (ct->flatCount+1));
- ct->flatCount = 0;
- doBuildFlatList(ct, ct->itemlist);
- ct->flatList[ct->flatCount] = NULL;
-}
-
-int newtCheckboxTreeAddItem(newtComponent co,
- const char * text, const void * data,
- int flags, int index, ...) {
- va_list argList;
- int numIndexes;
- int * indexes;
- int i;
-
- va_start(argList, index);
- numIndexes = 0;
- i = index;
- while (i != NEWT_ARG_LAST) {
- numIndexes++;
- i = va_arg(argList, int);
- }
-
- va_end(argList);
-
- indexes = alloca(sizeof(*indexes) * (numIndexes + 1));
- va_start(argList, index);
- numIndexes = 0;
- i = index;
- va_start(argList, index);
- while (i != NEWT_ARG_LAST) {
- indexes[numIndexes++] = i;
- i = va_arg(argList, int);
- }
- va_end(argList);
-
- indexes[numIndexes++] = NEWT_ARG_LAST;
-
- return newtCheckboxTreeAddArray(co, text, data, flags, indexes);
-}
-
-static int doFindItemPath(struct items * items, void * data, int * path,
- int * len) {
- int where = 0;
-
- while (items) {
- if (items->data == data) {
- if (path) path[items->depth] = where;
- if (len) *len = items->depth + 1;
- return 1;
- }
-
- if (items->branch && doFindItemPath(items->branch, data, path, len)) {
- if (path) path[items->depth] = where;
- return 1;
- }
-
- items = items->next;
- where++;
- }
-
- return 0;
-}
-
-int * newtCheckboxTreeFindItem(newtComponent co, void * data) {
- int len;
- int * path;
- struct CheckboxTree * ct = co->data;
-
- if (!doFindItemPath(ct->itemlist, data, NULL, &len)) return NULL;
-
- path = malloc(sizeof(*path) * (len + 1));
- doFindItemPath(ct->itemlist, data, path, NULL);
- path[len] = NEWT_ARG_LAST;
-
- return path;
-}
-
-int newtCheckboxTreeAddArray(newtComponent co,
- const char * text, const void * data,
- int flags, int * indexes) {
- struct items * curList, * newNode, * item = NULL;
- struct items ** listPtr = NULL;
- int i, index, numIndexes;
- struct CheckboxTree * ct = co->data;
-
- numIndexes = 0;
- while (indexes[numIndexes] != NEWT_ARG_LAST) numIndexes++;
-
- if (!ct->itemlist) {
- if (numIndexes > 1) return -1;
-
- ct->itemlist = malloc(sizeof(*ct->itemlist));
- item = ct->itemlist;
- item->prev = NULL;
- item->next = NULL;
- } else {
- curList = ct->itemlist;
- listPtr = &ct->itemlist;
-
- i = 0;
- index = indexes[i];
- while (i < numIndexes) {
- item = curList;
-
- if (index == NEWT_ARG_APPEND) {
- item = NULL;
- } else {
- while (index && item)
- item = item->next, index--;
- }
-
- i++;
- if (i < numIndexes) {
- curList = item->branch;
- listPtr = &item->branch;
- if (!curList && (i + 1 != numIndexes)) return -1;
-
- index = indexes[i];
- }
- }
-
- if (!curList) { /* create a new branch */
- item = malloc(sizeof(*curList->prev));
- item->next = item->prev = NULL;
- *listPtr = item;
- } else if (!item) { /* append to end */
- item = curList;
- while (item->next) item = item->next;
- item->next = malloc(sizeof(*curList->prev));
- item->next->prev = item;
- item = item->next;
- item->next = NULL;
- } else {
- newNode = malloc(sizeof(*newNode));
- newNode->prev = item->prev;
- newNode->next = item;
-
- if (item->prev) item->prev->next = newNode;
- item->prev = newNode;
- item = newNode;
- if (!item->prev) *listPtr = item;
- }
- }
-
- item->text = strdup(text);
- item->data = data;
- if (flags & NEWT_FLAG_SELECTED) {
- item->selected = 1;
- } else {
- item->selected = 0;
- }
- item->flags = flags;
- item->branch = NULL;
- item->depth = numIndexes - 1;
-
- i = 4 + (3 * item->depth);
-
- if ((strlen(text) + i + ct->pad) > (size_t)co->width) {
- co->width = strlen(text) + i + ct->pad;
- }
-
- return 0;
-}
-
-static struct items * findItem(struct items * items, const void * data) {
- struct items * i;
-
- while (items) {
- if (items->data == data) return items;
- if (items->branch) {
- i = findItem(items->branch, data);
- if (i) return i;
- }
-
- items = items->next;
- }
-
- return NULL;
-}
-
-static void listSelected(struct items * items, int * num, const void ** list, int seqindex) {
- while (items) {
- if ((seqindex ? items->selected==seqindex : items->selected) && !items->branch)
- list[(*num)++] = (void *) items->data;
- if (items->branch)
- listSelected(items->branch, num, list, seqindex);
- items = items->next;
- }
-}
-
-const void ** newtCheckboxTreeGetSelection(newtComponent co, int *numitems)
-{
- return newtCheckboxTreeGetMultiSelection(co, numitems, 0);
-}
-
-const void ** newtCheckboxTreeGetMultiSelection(newtComponent co, int *numitems, char seqnum)
-{
- struct CheckboxTree * ct;
- const void **retval;
- int seqindex=0;
-
- if(!co || !numitems) return NULL;
-
- ct = co->data;
-
- if (seqnum) {
- while( ct->seq[seqindex] && ( ct->seq[seqindex] != seqnum )) seqindex++;
- } else {
- seqindex = 0;
- }
-
- *numitems = countItems(ct->itemlist, (seqindex ? seqindex : COUNT_SELECTED));
- if (!*numitems) return NULL;
-
- retval = malloc(*numitems * sizeof(void *));
- *numitems = 0;
- listSelected(ct->itemlist, numitems, retval, seqindex);
-
- return retval;
-}
-
-newtComponent newtCheckboxTree(int left, int top, int height, int flags) {
- return newtCheckboxTreeMulti(left, top, height, NULL, flags);
-}
-
-newtComponent newtCheckboxTreeMulti(int left, int top, int height, char *seq, int flags) {
- newtComponent co;
- struct CheckboxTree * ct;
-
- co = malloc(sizeof(*co));
- ct = malloc(sizeof(struct CheckboxTree));
- co->callback = NULL;
- co->data = ct;
- co->ops = &ctOps;
- co->takesFocus = 1;
- co->height = height;
- co->width = 0;
- co->isMapped = 0;
- ct->itemlist = NULL;
- ct->firstItem = NULL;
- ct->currItem = NULL;
- ct->flatList = NULL;
- if (seq)
- ct->seq = strdup(seq);
- else
- ct->seq = strdup(" *");
- if (flags & NEWT_FLAG_SCROLL) {
- ct->sb = newtVerticalScrollbar(left, top, height,
- COLORSET_LISTBOX, COLORSET_ACTLISTBOX);
- ct->pad = 2;
- } else {
- ct->sb = NULL;
- ct->pad = 0;
- }
-
- return co;
-}
-
-static void ctMapped(newtComponent co, int isMapped) {
- struct CheckboxTree * ct = co->data;
-
- co->isMapped = isMapped;
- if (ct->sb)
- ct->sb->ops->mapped(ct->sb, isMapped);
-}
-
-static void ctPlace(newtComponent co, int newLeft, int newTop) {
- struct CheckboxTree * ct = co->data;
-
- co->top = newTop;
- co->left = newLeft;
-
- if (ct->sb)
- ct->sb->ops->place(ct->sb, co->left + co->width - 1, co->top);
-}
-
-int ctSetItem(newtComponent co, struct items *item, enum newtFlagsSense sense)
-{
- struct CheckboxTree * ct = co->data;
- struct items * currItem;
- struct items * firstItem;
-
- if (!item)
- return 1;
-
- switch(sense) {
- case NEWT_FLAGS_RESET:
- item->selected = 0;
- break;
- case NEWT_FLAGS_SET:
- item->selected = 1;
- break;
- case NEWT_FLAGS_TOGGLE:
- if (item->branch)
- item->selected = !item->selected;
- else {
- item->selected++;
- if (item->selected==strlen(ct->seq))
- item->selected = 0;
- }
- break;
- }
-
- if (item->branch) {
- currItem = *ct->currItem;
- firstItem = *ct->firstItem;
-
- buildFlatList(co);
-
- ct->currItem = ct->flatList;
- while (*ct->currItem != currItem) ct->currItem++;
-
- ct->firstItem = ct->flatList;
- if (ct->flatCount > co->height) {
- struct items ** last = ct->flatList + ct->flatCount - co->height;
- while (*ct->firstItem != firstItem && ct->firstItem != last)
- ct->firstItem++;
- }
- }
-
- return 0;
-}
-
-static void ctSetItems(struct items *item, int selected)
-{
- for (; item; item = item->next) {
- if (!item->branch)
- item->selected = selected;
- else
- ctSetItems(item->branch, selected);
- }
-}
-
-static void ctDraw(newtComponent co) {
- struct CheckboxTree * ct = co->data;
- struct items ** item;
- int i, j;
- char * spaces = NULL;
- int currRow = -1;
-
- if (!co->isMapped) return ;
-
- if (!ct->firstItem) {
- buildFlatList(co);
- ct->firstItem = ct->currItem = ct->flatList;
- }
-
- item = ct->firstItem;
-
- i = 0;
- while (*item && i < co->height) {
- newtGotorc(co->top + i, co->left);
- if (*item == *ct->currItem) {
- SLsmg_set_color(NEWT_COLORSET_ACTLISTBOX);
- currRow = co->top + i;
- } else
- SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
- for (j = 0; j < (*item)->depth; j++)
- SLsmg_write_string(" ");
-
- if ((*item)->branch) {
- if ((*item)->selected)
- SLsmg_write_string("<-> ");
- else
- SLsmg_write_string("<+> ");
- } else {
- char tmp[5];
- snprintf(tmp,5,"[%c] ",ct->seq[(*item)->selected]);
- SLsmg_write_string(tmp);
- }
-
- SLsmg_write_nstring((*item)->text, co->width - 4 -
- (3 * (*item)->depth));
- item++;
- i++;
- }
-
- /* There could be empty lines left (i.e. if the user closes an expanded
- list which is the last thing in the tree, and whose elements are
- displayed at the bottom of the screen */
- if (i < co->height) {
- spaces = alloca(co->width);
- memset(spaces, ' ', co->width);
- SLsmg_set_color(NEWT_COLORSET_LISTBOX);
- }
- while (i < co->height) {
- newtGotorc(co->top + i, co->left);
- SLsmg_write_nstring(spaces, co->width);
- i++;
- }
-
- if(ct->sb) {
- newtScrollbarSet(ct->sb, ct->currItem - ct->flatList,
- ct->flatCount - 1);
- ct->sb->ops->draw(ct->sb);
- }
-
- newtGotorc(currRow, co->left + 1);
-}
-
-static void ctDestroy(newtComponent co) {
- struct CheckboxTree * ct = co->data;
- struct items * item, * nextitem;
-
- nextitem = item = ct->itemlist;
-
- while (item != NULL) {
- nextitem = item->next;
- free(item->text);
- free(item);
- item = nextitem;
- }
-
- free(ct->seq);
- free(ct);
- free(co);
-}
-
-struct eventResult ctEvent(newtComponent co, struct event ev) {
- struct CheckboxTree * ct = co->data;
- struct eventResult er;
- struct items ** listEnd, ** lastItem;
- int key, selnum = 1;
-
- er.result = ER_IGNORED;
-
- if(ev.when == EV_EARLY || ev.when == EV_LATE) {
- return er;
- }
-
- switch(ev.event) {
- case EV_KEYPRESS:
- key = ev.u.key;
- if (key == (char) key && key != ' ') {
- for (selnum = 0; ct->seq[selnum]; selnum++)
- if (key == ct->seq[selnum])
- break;
- if (!ct->seq[selnum])
- switch (key) {
- case '-': selnum = 0; break;
- case '+':
- case '*': selnum = 1; break;
- }
- if (ct->seq[selnum])
- key = '*';
- }
- switch(key) {
- case ' ':
- case NEWT_KEY_ENTER:
- ctSetItem(co, *ct->currItem, NEWT_FLAGS_TOGGLE);
- er.result = ER_SWALLOWED;
- if (!(*ct->currItem)->branch || (*ct->currItem)->selected)
- key = NEWT_KEY_DOWN;
- else
- key = '*';
- break;
- case '*':
- if ((*ct->currItem)->branch) {
- ctSetItems((*ct->currItem)->branch, selnum);
- if (!(*ct->currItem)->selected)
- key = NEWT_KEY_DOWN;
- } else {
- (*ct->currItem)->selected = selnum;
- key = NEWT_KEY_DOWN;
- }
- er.result = ER_SWALLOWED;
- break;
- }
- switch (key) {
- case '*':
- ctDraw(co);
- if(co->callback) co->callback(co, co->callbackData);
- return er;
- case NEWT_KEY_HOME:
- ct->currItem = ct->flatList;
- ct->firstItem = ct->flatList;
- ctDraw(co);
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- return er;
- case NEWT_KEY_END:
- ct->currItem = ct->flatList + ct->flatCount - 1;
- if (ct->flatCount <= co->height)
- ct->firstItem = ct->flatList;
- else
- ct->firstItem = ct->flatList + ct->flatCount - co->height;
- ctDraw(co);
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- return er;
- case NEWT_KEY_DOWN:
- if (ev.u.key != NEWT_KEY_DOWN) {
- if(co->callback) co->callback(co, co->callbackData);
- if (strlen(ct->seq) != 2) {
- ctDraw(co);
- return er;
- }
- }
- if ((ct->currItem - ct->flatList + 1) < ct->flatCount) {
- ct->currItem++;
-
- if (ct->currItem - ct->firstItem >= co->height)
- ct->firstItem++;
-
- ctDraw(co);
- } else if (ev.u.key != NEWT_KEY_DOWN)
- ctDraw(co);
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- return er;
- case NEWT_KEY_UP:
- if (ct->currItem != ct->flatList) {
- ct->currItem--;
-
- if (ct->currItem < ct->firstItem)
- ct->firstItem = ct->currItem;
-
- ctDraw(co);
- }
- er.result = ER_SWALLOWED;
- if(co->callback) co->callback(co, co->callbackData);
- return er;
- case NEWT_KEY_PGUP:
- if (ct->firstItem - co->height < ct->flatList) {
- ct->firstItem = ct->currItem = ct->flatList;
- } else {
- ct->currItem -= co->height;
- ct->firstItem -= co->height;
- }
-
- ctDraw(co);
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- return er;
- case NEWT_KEY_PGDN:
- listEnd = ct->flatList + ct->flatCount - 1;
- lastItem = ct->firstItem + co->height - 1;
-
- if (lastItem + co->height > listEnd) {
- ct->firstItem = listEnd - co->height + 1;
- ct->currItem = listEnd;
- } else {
- ct->currItem += co->height;
- ct->firstItem += co->height;
- }
-
- ctDraw(co);
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- return er;
- }
- break;
-
- case EV_FOCUS:
- ctDraw(co);
- er.result = ER_SWALLOWED;
- break;
-
- case EV_UNFOCUS:
- ctDraw(co);
- er.result = ER_SWALLOWED;
- break;
- default:
- break;
- }
-
- return er;
-}
-
-const void * newtCheckboxTreeGetCurrent(newtComponent co) {
- struct CheckboxTree * ct = co->data;
-
- if (!ct->currItem) return NULL;
- return (*ct->currItem)->data;
-}
-
-void newtCheckboxTreeSetEntry(newtComponent co, const void * data, const char * text)
-{
- struct CheckboxTree * ct;
- struct items * item;
- int i;
-
- if (!co) return;
- ct = co->data;
- item = findItem(ct->itemlist, data);
- if (!item) return;
-
- free(item->text);
- item->text = strdup(text);
-
- i = 4 + (3 * item->depth);
-
- if ((strlen(text) + i + ct->pad) > (size_t)co->width) {
- co->width = strlen(text) + i + ct->pad;
- }
-
- ctDraw(co);
-}
-
-char newtCheckboxTreeGetEntryValue(newtComponent co, const void * data)
-{
- struct CheckboxTree * ct;
- struct items * item;
-
- if (!co) return -1;
- ct = co->data;
- item = findItem(ct->itemlist, data);
- if (!item) return -1;
- if (item->branch)
- return item->selected ? NEWT_CHECKBOXTREE_EXPANDED : NEWT_CHECKBOXTREE_COLLAPSED;
- else
- return ct->seq[item->selected];
-}
-
-void newtCheckboxTreeSetEntryValue(newtComponent co, const void * data, char value)
-{
- struct CheckboxTree * ct;
- struct items * item;
- int i;
-
- if (!co) return;
- ct = co->data;
- item = findItem(ct->itemlist, data);
- if (!item || item->branch) return;
-
- for(i = 0; ct->seq[i]; i++)
- if (value == ct->seq[i])
- break;
-
- if (!ct->seq[i]) return;
- item->selected = i;
-
- ctDraw(co);
-}
-
diff --git a/mdk-stage1/newt/entry.c b/mdk-stage1/newt/entry.c
deleted file mode 100644
index 1b33f1c6f..000000000
--- a/mdk-stage1/newt/entry.c
+++ /dev/null
@@ -1,376 +0,0 @@
-#include <ctype.h>
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct entry {
- int flags;
- char * buf;
- char ** resultPtr;
- int bufAlloced;
- int bufUsed; /* amount of the buffer that's been used */
- int cursorPosition; /* cursor *in the string* on on screen */
- int firstChar; /* first character position being shown */
- newtEntryFilter filter;
- void * filterData;
-};
-
-static void entryDraw(newtComponent co);
-static void entryDestroy(newtComponent co);
-static struct eventResult entryEvent(newtComponent co,
- struct event ev);
-
-static struct eventResult entryHandleKey(newtComponent co, int key);
-
-static struct componentOps entryOps = {
- entryDraw,
- entryEvent,
- entryDestroy,
- newtDefaultPlaceHandler,
- newtDefaultMappedHandler,
-} ;
-
-void newtEntrySet(newtComponent co, const char * value, int cursorAtEnd) {
- struct entry * en = co->data;
-
- if ((strlen(value) + 1) > (unsigned int)en->bufAlloced) {
- free(en->buf);
- en->bufAlloced = strlen(value) + 1;
- en->buf = malloc(en->bufAlloced);
- if (en->resultPtr) *en->resultPtr = en->buf;
- }
- memset(en->buf, 0, en->bufAlloced); /* clear the buffer */
- strcpy(en->buf, value);
- en->bufUsed = strlen(value);
- en->firstChar = 0;
- if (cursorAtEnd)
- en->cursorPosition = en->bufUsed;
- else
- en->cursorPosition = 0;
-
- entryDraw(co);
-} ;
-
-newtComponent newtEntry(int left, int top, const char * initialValue, int width,
- char ** resultPtr, int flags) {
- newtComponent co;
- struct entry * en;
-
- co = malloc(sizeof(*co));
- en = malloc(sizeof(struct entry));
- co->data = en;
-
- co->top = top;
- co->left = left;
- co->height = 1;
- co->width = width;
- co->isMapped = 0;
- co->callback = NULL;
-
- co->ops = &entryOps;
-
- en->flags = flags;
- en->cursorPosition = 0;
- en->firstChar = 0;
- en->bufUsed = 0;
- en->bufAlloced = width + 1;
- en->filter = NULL;
-
- if (!(en->flags & NEWT_FLAG_DISABLED))
- co->takesFocus = 1;
- else
- co->takesFocus = 0;
-
- if (initialValue && strlen(initialValue) > (unsigned int)width) {
- en->bufAlloced = strlen(initialValue) + 1;
- }
- en->buf = malloc(en->bufAlloced);
- en->resultPtr = resultPtr;
- if (en->resultPtr) *en->resultPtr = en->buf;
-
- memset(en->buf, 0, en->bufAlloced);
- if (initialValue) {
- strcpy(en->buf, initialValue);
- en->bufUsed = strlen(initialValue);
- en->cursorPosition = en->bufUsed;
- } else {
- *en->buf = '\0';
- en->bufUsed = 0;
- en->cursorPosition = 0;
- }
-
- return co;
-}
-
-static void entryDraw(newtComponent co) {
- struct entry * en = co->data;
- int i;
- char * chptr;
- int len;
-
- if (!co->isMapped) return;
-
- if (en->flags & NEWT_FLAG_DISABLED)
- SLsmg_set_color(NEWT_COLORSET_DISENTRY);
- else
- SLsmg_set_color(NEWT_COLORSET_ENTRY);
-
- if (en->flags & NEWT_FLAG_HIDDEN) {
- newtGotorc(co->top, co->left);
- for (i = 0; i < co->width; i++)
- SLsmg_write_char('_');
- newtGotorc(co->top, co->left);
-
- return;
- }
-
- newtGotorc(co->top, co->left);
-
- if (en->cursorPosition < en->firstChar) {
- /* scroll to the left */
- en->firstChar = en->cursorPosition;
- } else if ((en->firstChar + co->width) <= en->cursorPosition) {
- /* scroll to the right */
- en->firstChar = en->cursorPosition - co->width + 1;
- }
-
- chptr = en->buf + en->firstChar;
-
- if (en->flags & NEWT_FLAG_PASSWORD) {
- char *tmpptr, *p;
-
- tmpptr = alloca(strlen(chptr+2));
- strcpy(tmpptr, chptr);
- for (p = tmpptr; *p; p++)
- *p = '*';
- chptr = tmpptr;
- }
-
- len = strlen(chptr);
-
- if (len <= co->width) {
- i = len;
- SLsmg_write_string(chptr);
- while (i < co->width) {
- SLsmg_write_char('_');
- i++;
- }
- } else {
- SLsmg_write_nstring(chptr, co->width);
- }
-
- if (en->flags & NEWT_FLAG_HIDDEN)
- newtGotorc(co->top, co->left);
- else
- newtGotorc(co->top, co->left + (en->cursorPosition - en->firstChar));
-}
-
-void newtEntrySetFlags(newtComponent co, int flags, enum newtFlagsSense sense) {
- struct entry * en = co->data;
- int row, col;
-
- en->flags = newtSetFlags(en->flags, flags, sense);
-
- if (!(en->flags & NEWT_FLAG_DISABLED))
- co->takesFocus = 1;
- else
- co->takesFocus = 0;
-
- newtGetrc(&row, &col);
- entryDraw(co);
- newtGotorc(row, col);
-}
-
-static void entryDestroy(newtComponent co) {
- struct entry * en = co->data;
-
- free(en->buf);
- free(en);
- free(co);
-}
-
-static struct eventResult entryEvent(newtComponent co,
- struct event ev) {
- struct entry * en = co->data;
- struct eventResult er;
- int ch;
-
- if (ev.when == EV_NORMAL) {
- switch (ev.event) {
- case EV_FOCUS:
- newtCursorOn();
- if (en->flags & NEWT_FLAG_HIDDEN)
- newtGotorc(co->top, co->left);
- else
- newtGotorc(co->top, co->left +
- (en->cursorPosition - en->firstChar));
- er.result = ER_SWALLOWED;
- break;
-
- case EV_UNFOCUS:
- newtCursorOff();
- newtGotorc(0, 0);
- er.result = ER_SWALLOWED;
- if (co->callback)
- co->callback(co, co->callbackData);
- break;
-
- case EV_KEYPRESS:
- ch = ev.u.key;
- if (en->filter)
- ch = en->filter(co, en->filterData, ch, en->cursorPosition);
- if (ch) er = entryHandleKey(co, ch);
- break;
-
- case EV_MOUSE:
- if ((ev.u.mouse.type == MOUSE_BUTTON_DOWN) &&
- (en->flags ^ NEWT_FLAG_HIDDEN)) {
- if (strlen(en->buf) >= (size_t) (ev.u.mouse.x - co->left)) {
- en->cursorPosition = ev.u.mouse.x - co->left;
- newtGotorc(co->top,
- co->left +(en->cursorPosition - en->firstChar));
- } else {
- en->cursorPosition = strlen(en->buf);
- newtGotorc(co->top,
- co->left +(en->cursorPosition - en->firstChar));
- }
- }
- break;
- }
- } else
- er.result = ER_IGNORED;
-
- return er;
-}
-
-static struct eventResult entryHandleKey(newtComponent co, int key) {
- struct entry * en = co->data;
- struct eventResult er;
- char * chptr, * insPoint;
-
- er.result = ER_SWALLOWED;
- switch (key) {
- case '\r': /* Return */
- if (en->flags & NEWT_FLAG_RETURNEXIT) {
- er.result = ER_EXITFORM;
- } else {
- er.result = ER_NEXTCOMP;
- }
- break;
-
- case '\001': /* ^A */
- case NEWT_KEY_HOME:
- en->cursorPosition = 0;
- break;
-
- case '\005': /* ^E */
- case NEWT_KEY_END:
- en->cursorPosition = en->bufUsed;
- break;
-
- case '\013': /* ^K */
- en->bufUsed = en->cursorPosition;
- memset(en->buf + en->bufUsed, 0, en->bufAlloced - en->bufUsed);
- break;
-
- case '\002': /* ^B */
- case NEWT_KEY_LEFT:
- if (en->cursorPosition)
- en->cursorPosition--;
- break;
-
- case '\004':
- case NEWT_KEY_DELETE:
- chptr = en->buf + en->cursorPosition;
- if (*chptr) {
- chptr++;
- while (*chptr) {
- *(chptr - 1) = *chptr;
- chptr++;
- }
- *(chptr - 1) = '\0';
- en->bufUsed--;
- }
- break;
-
- case NEWT_KEY_BKSPC:
- if (en->cursorPosition) {
- /* if this isn't true, there's nothing to erase */
- chptr = en->buf + en->cursorPosition;
- en->bufUsed--;
- en->cursorPosition--;
- while (*chptr) {
- *(chptr - 1) = *chptr;
- chptr++;
- }
- *(chptr - 1) = '\0';
- }
- break;
-
- case '\006': /* ^B */
- case NEWT_KEY_RIGHT:
- if (en->cursorPosition < en->bufUsed)
- en->cursorPosition++;
- break;
-
- default:
- if ((key >= 0x20 && key <= 0x7e) || (key >= 0xa0 && key <= 0xff)) {
- if (!(en->flags & NEWT_FLAG_SCROLL) && en->bufUsed >= co->width) {
- SLtt_beep();
- break;
- }
-
- if ((en->bufUsed + 1) == en->bufAlloced) {
- en->bufAlloced += 20;
- en->buf = realloc(en->buf, en->bufAlloced);
- if (en->resultPtr) *en->resultPtr = en->buf;
- memset(en->buf + en->bufUsed + 1, 0, 20);
- }
-
- if (en->cursorPosition == en->bufUsed) {
- en->bufUsed++;
- } else {
- /* insert the new character */
-
- /* chptr is the last character in the string */
- chptr = (en->buf + en->bufUsed) - 1;
- if ((en->bufUsed + 1) == en->bufAlloced) {
- /* this string fills the buffer, so clip it */
- chptr--;
- } else
- en->bufUsed++;
-
- insPoint = en->buf + en->cursorPosition;
-
- while (chptr >= insPoint) {
- *(chptr + 1) = *chptr;
- chptr--;
- }
-
- }
-
- en->buf[en->cursorPosition++] = key;
- } else {
- er.result = ER_IGNORED;
- }
- }
-
- entryDraw(co);
-
- return er;
-}
-
-char * newtEntryGetValue(newtComponent co) {
- struct entry * en = co->data;
-
- return en->buf;
-}
-
-void newtEntrySetFilter(newtComponent co, newtEntryFilter filter, void * data) {
- struct entry * en = co->data;
- en->filter = filter;
- en->filterData = data;
-}
diff --git a/mdk-stage1/newt/form.c b/mdk-stage1/newt/form.c
deleted file mode 100644
index 4ad465e38..000000000
--- a/mdk-stage1/newt/form.c
+++ /dev/null
@@ -1,712 +0,0 @@
-#include <unistd.h>
-#include <slang.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <sys/time.h>
-#include <sys/types.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-
-/****************************************************************************
- These forms handle vertical scrolling of components with a height of 1
-
- Horizontal scrolling won't work, and scrolling large widgets will fail
- miserably. It shouldn't be too hard to fix either of those if anyone
- cares to. I only use scrolling for listboxes and text boxes though so
- I didn't bother.
-*****************************************************************************/
-
-struct element {
- int top, left; /* Actual, not virtual. These are translated */
- newtComponent co; /* into actual through vertOffset */
-};
-
-struct fdInfo {
- int fd;
- int flags;
-};
-
-struct form {
- int numCompsAlloced;
- struct element * elements;
- int numComps;
- int currComp;
- int fixedHeight;
- int flags;
- int vertOffset;
- newtComponent vertBar, exitComp;
- const char * help;
- int numRows;
- int * hotKeys;
- int numHotKeys;
- int background;
- int beenSet;
- int numFds;
- struct fdInfo * fds;
- int maxFd;
- int timer; /* in milliseconds */
- struct timeval lastTimeout;
- void * helpTag;
- newtCallback helpCb;
-};
-
-static void gotoComponent(struct form * form, int newComp);
-static struct eventResult formEvent(newtComponent co, struct event ev);
-static struct eventResult sendEvent(newtComponent comp, struct event ev);
-static void formPlace(newtComponent co, int left, int top);
-
-/* Global, ick */
-static newtCallback helpCallback;
-
-/* this isn't static as grid.c tests against it to find forms */
-struct componentOps formOps = {
- newtDrawForm,
- formEvent,
- newtFormDestroy,
- formPlace,
- newtDefaultMappedHandler,
-} ;
-
-static inline int componentFits(newtComponent co, int compNum) {
- struct form * form = co->data;
- struct element * el = form->elements + compNum;
-
- if ((co->top + form->vertOffset) > el->top) return 0;
- if ((co->top + form->vertOffset + co->height) <
- (el->top + el->co->height)) return 0;
-
- return 1;
-}
-
-newtComponent newtForm(newtComponent vertBar, void * help, int flags) {
- newtComponent co;
- struct form * form;
-
- co = malloc(sizeof(*co));
- form = malloc(sizeof(*form));
- co->data = form;
- co->width = 0;
- co->height = 0;
- co->top = -1;
- co->left = -1;
- co->isMapped = 0;
-
- co->takesFocus = 0; /* we may have 0 components */
- co->ops = &formOps;
-
- form->help = help;
- form->flags = flags;
- form->numCompsAlloced = 5;
- form->numComps = 0;
- form->currComp = -1;
- form->vertOffset = 0;
- form->fixedHeight = 0;
- form->numRows = 0;
- form->numFds = 0;
- form->maxFd = 0;
- form->fds = NULL;
- form->beenSet = 0;
- form->elements = malloc(sizeof(*(form->elements)) * form->numCompsAlloced);
-
- form->background = COLORSET_WINDOW;
- form->hotKeys = malloc(sizeof(int));
- form->numHotKeys = 0;
- form->timer = 0;
- form->lastTimeout.tv_sec = form->lastTimeout.tv_usec = 0;
- if (!(form->flags & NEWT_FLAG_NOF12)) {
- newtFormAddHotKey(co, NEWT_KEY_F12);
- }
-
- if (vertBar)
- form->vertBar = vertBar;
- else
- form->vertBar = NULL;
-
- form->helpTag = help;
- form->helpCb = helpCallback;
-
- return co;
-}
-
-newtComponent newtFormGetCurrent(newtComponent co) {
- struct form * form = co->data;
-
- return form->elements[form->currComp].co;
-}
-
-void newtFormSetCurrent(newtComponent co, newtComponent subco) {
- struct form * form = co->data;
- int i, new;
-
- for (i = 0; i < form->numComps; i++) {
- if (form->elements[i].co == subco) break;
- }
-
- if (form->elements[i].co != subco) return;
- new = i;
-
- if (co->isMapped && !componentFits(co, new)) {
- gotoComponent(form, -1);
- form->vertOffset = form->elements[new].top - co->top - 1;
- if (form->vertOffset > (form->numRows - co->height))
- form->vertOffset = form->numRows - co->height;
- }
-
- gotoComponent(form, new);
-}
-
-void newtFormSetTimer(newtComponent co, int millisecs) {
- struct form * form = co->data;
-
- form->timer = millisecs;
- form->lastTimeout.tv_usec = 0;
- form->lastTimeout.tv_sec = 0;
-}
-
-void newtFormSetHeight(newtComponent co, int height) {
- struct form * form = co->data;
-
- form->fixedHeight = 1;
- co->height = height;
-}
-
-void newtFormSetWidth(newtComponent co, int width) {
- co->width = width;
-}
-
-void newtFormAddComponent(newtComponent co, newtComponent newco) {
- struct form * form = co->data;
-
- co->takesFocus = 1;
-
- if (form->numCompsAlloced == form->numComps) {
- form->numCompsAlloced += 5;
- form->elements = realloc(form->elements,
- sizeof(*(form->elements)) * form->numCompsAlloced);
- }
-
- /* we grab real values for these a bit later */
- form->elements[form->numComps].left = -2;
- form->elements[form->numComps].top = -2;
- form->elements[form->numComps].co = newco;
-
- if (newco->takesFocus && form->currComp == -1)
- form->currComp = form->numComps;
-
- form->numComps++;
-}
-
-void newtFormAddComponents(newtComponent co, ...) {
- va_list ap;
- newtComponent subco;
-
- va_start(ap, co);
-
- while ((subco = va_arg(ap, newtComponent)))
- newtFormAddComponent(co, subco);
-
- va_end(ap);
-}
-
-static void formPlace(newtComponent co, int left, int top) {
- struct form * form = co->data;
- int vertDelta, horizDelta;
- struct element * el;
- int i;
-
- newtFormSetSize(co);
-
- vertDelta = top - co->top;
- horizDelta = left - co->left;
- co->top = top;
- co->left = left;
-
- for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
- el->co->top += vertDelta;
- el->top += vertDelta;
- el->co->left += horizDelta;
- el->left += horizDelta;
- }
-}
-
-void newtDrawForm(newtComponent co) {
- struct form * form = co->data;
- struct element * el;
- int i;
-
- newtFormSetSize(co);
-
- SLsmg_set_color(form->background);
- newtClearBox(co->left, co->top, co->width, co->height);
- for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
- /* the scrollbar *always* fits somewhere */
- if (el->co == form->vertBar) {
- el->co->ops->mapped(el->co, 1);
- el->co->ops->draw(el->co);
- } else {
- /* only draw it if it'll fit on the screen vertically */
- if (componentFits(co, i)) {
- el->co->top = el->top - form->vertOffset;
- el->co->ops->mapped(el->co, 1);
- el->co->ops->draw(el->co);
- } else {
- el->co->ops->mapped(el->co, 0);
- }
- }
- }
-
- if (form->vertBar)
- newtScrollbarSet(form->vertBar, form->vertOffset,
- form->numRows - co->height);
-}
-
-static struct eventResult formEvent(newtComponent co, struct event ev) {
- struct form * form = co->data;
- newtComponent subco = form->elements[form->currComp].co;
- int new, wrap = 0;
- struct eventResult er;
- int dir = 0, page = 0;
- int i, num, found;
- struct element * el;
-
- er.result = ER_IGNORED;
- if (!form->numComps) return er;
-
- subco = form->elements[form->currComp].co;
-
- switch (ev.when) {
- case EV_EARLY:
- if (ev.event == EV_KEYPRESS) {
- if (ev.u.key == NEWT_KEY_TAB) {
- er.result = ER_SWALLOWED;
- dir = 1;
- wrap = 1;
- } else if (ev.u.key == NEWT_KEY_UNTAB) {
- er.result = ER_SWALLOWED;
- dir = -1;
- wrap = 1;
- }
- }
-
- if (form->numComps) {
- i = form->currComp;
- num = 0;
- while (er.result == ER_IGNORED && num != form->numComps ) {
- er = form->elements[i].co->ops->event(form->elements[i].co, ev);
-
- num++;
- i++;
- if (i == form->numComps) i = 0;
- }
- }
-
- break;
-
- case EV_NORMAL:
- if (ev.event == EV_MOUSE) {
- found = 0;
- for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
- if ((el->co->top <= ev.u.mouse.y) &&
- (el->co->top + el->co->height > ev.u.mouse.y) &&
- (el->co->left <= ev.u.mouse.x) &&
- (el->co->left + el->co->width > ev.u.mouse.x)) {
- found = 1;
- if (el->co->takesFocus) {
- gotoComponent(form, i);
- subco = form->elements[form->currComp].co;
- }
- }
- /* If we did not find a co to send this event to, we
- should just swallow the event here. */
- }
- if (!found) {
- er.result = ER_SWALLOWED;
-
- return er;
- }
- }
- er = subco->ops->event(subco, ev);
- switch (er.result) {
- case ER_NEXTCOMP:
- er.result = ER_SWALLOWED;
- dir = 1;
- break;
-
- case ER_EXITFORM:
- form->exitComp = subco;
- break;
-
- default:
- break;
- }
- break;
-
- case EV_LATE:
- er = subco->ops->event(subco, ev);
-
- if (er.result == ER_IGNORED) {
- switch (ev.u.key) {
- case NEWT_KEY_UP:
- case NEWT_KEY_LEFT:
- case NEWT_KEY_BKSPC:
- er.result = ER_SWALLOWED;
- dir = -1;
- break;
-
- case NEWT_KEY_DOWN:
- case NEWT_KEY_RIGHT:
- er.result = ER_SWALLOWED;
- dir = 1;
- break;
-
- case NEWT_KEY_PGUP:
- er.result = ER_SWALLOWED;
- dir = -1;
- page = 1;
- break;
-
- case NEWT_KEY_PGDN:
- er.result = ER_SWALLOWED;
- dir = 1;
- page = 1;
- break;
- }
- }
- }
-
- if (dir) {
- new = form->currComp;
-
- if (page) {
- new += dir * co->height;
- if (new < 0)
- new = 0;
- else if (new >= form->numComps)
- new = (form->numComps - 1);
-
- while (!form->elements[new].co->takesFocus)
- new = new - dir;
- } else {
- do {
- new += dir;
-
- if (wrap) {
- if (new < 0)
- new = form->numComps - 1;
- else if (new >= form->numComps)
- new = 0;
- } else if (new < 0 || new >= form->numComps)
- return er;
- } while (!form->elements[new].co->takesFocus);
- }
-
- /* make sure this component is visible */
- if (!componentFits(co, new)) {
- gotoComponent(form, -1);
-
- if (dir < 0) {
- /* make the new component the first one */
- form->vertOffset = form->elements[new].top - co->top;
- } else {
- /* make the new component the last one */
- form->vertOffset = (form->elements[new].top +
- form->elements[new].co->height) -
- (co->top + co->height);
- }
-
- if (form->vertOffset < 0) form->vertOffset = 0;
- if (form->vertOffset > (form->numRows - co->height))
- form->vertOffset = form->numRows - co->height;
-
- newtDrawForm(co);
- }
-
- gotoComponent(form, new);
- er.result = ER_SWALLOWED;
- }
-
- return er;
-}
-
-/* this also destroys all of the components on the form */
-void newtFormDestroy(newtComponent co) {
- newtComponent subco;
- struct form * form = co->data;
- int i;
-
- /* first, destroy all of the components */
- for (i = 0; i < form->numComps; i++) {
- subco = form->elements[i].co;
- if (subco->ops->destroy) {
- subco->ops->destroy(subco);
- } else {
- if (subco->data) free(subco->data);
- free(subco);
- }
- }
-
- if (form->hotKeys) free(form->hotKeys);
-
- free(form->elements);
- free(form);
- free(co);
-}
-
-newtComponent newtRunForm(newtComponent co) {
- struct newtExitStruct es;
-
- newtFormRun(co, &es);
- if (es.reason == NEWT_EXIT_HOTKEY) {
- if (es.u.key == NEWT_KEY_F12) {
- es.reason = NEWT_EXIT_COMPONENT;
- es.u.co = co;
- } else {
- return NULL;
- }
- }
-
- return es.u.co;
-}
-
-void newtFormAddHotKey(newtComponent co, int key) {
- struct form * form = co->data;
-
- form->numHotKeys++;
- form->hotKeys = realloc(form->hotKeys, sizeof(int) * form->numHotKeys);
- form->hotKeys[form->numHotKeys - 1] = key;
-}
-
-void newtFormSetSize(newtComponent co) {
- struct form * form = co->data;
- int delta, i;
- struct element * el;
-
- if (form->beenSet) return;
-
- form->beenSet = 1;
-
- if (!form->numComps) return;
-
- co->width = 0;
- if (!form->fixedHeight) co->height = 0;
-
- co->top = form->elements[0].co->top;
- co->left = form->elements[0].co->left;
- for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
- if (el->co->ops == &formOps)
- newtFormSetSize(el->co);
-
- el->left = el->co->left;
- el->top = el->co->top;
-
- if (co->left > el->co->left) {
- delta = co->left - el->co->left;
- co->left -= delta;
- co->width += delta;
- }
-
- if (co->top > el->co->top) {
- delta = co->top - el->co->top;
- co->top -= delta;
- if (!form->fixedHeight)
- co->height += delta;
- }
-
- if ((co->left + co->width) < (el->co->left + el->co->width))
- co->width = (el->co->left + el->co->width) - co->left;
-
- if (!form->fixedHeight) {
- if ((co->top + co->height) < (el->co->top + el->co->height))
- co->height = (el->co->top + el->co->height) - co->top;
- }
-
- if ((el->co->top + el->co->height - co->top) > form->numRows) {
- form->numRows = el->co->top + el->co->height - co->top;
- }
- }
-}
-
-void newtFormRun(newtComponent co, struct newtExitStruct * es) {
- struct form * form = co->data;
- struct event ev;
- struct eventResult er;
- int key, i, max;
- int done = 0;
- fd_set readSet, writeSet;
- struct timeval nextTimeout, now, timeout;
-
- newtFormSetSize(co);
- /* draw all of the components */
- newtDrawForm(co);
-
- if (form->currComp == -1) {
- gotoComponent(form, 0);
- } else
- gotoComponent(form, form->currComp);
-
- while (!done) {
- newtRefresh();
-
- FD_ZERO(&readSet);
- FD_ZERO(&writeSet);
- FD_SET(0, &readSet);
- max = form->maxFd;
-
- for (i = 0; i < form->numFds; i++) {
- if (form->fds[i].flags & NEWT_FD_READ)
- FD_SET(form->fds[i].fd, &readSet);
- if (form->fds[i].flags & NEWT_FD_WRITE)
- FD_SET(form->fds[i].fd, &writeSet);
- }
-
- if (form->timer) {
- /* Calculate when we next need to return with a timeout. Do
- this inside the loop in case a callback resets the timer. */
- if (!form->lastTimeout.tv_sec && !form->lastTimeout.tv_usec)
- gettimeofday(&form->lastTimeout, NULL);
-
- nextTimeout.tv_sec = form->lastTimeout.tv_sec +
- (form->timer / 1000);
- nextTimeout.tv_usec = form->lastTimeout.tv_usec +
- (form->timer % 1000) * 1000;
-
- gettimeofday(&now, 0);
-
- if (now.tv_sec > nextTimeout.tv_sec) {
- timeout.tv_sec = timeout.tv_usec = 0;
- } else if (now.tv_sec == nextTimeout.tv_sec) {
- timeout.tv_sec = 0;
- if (now.tv_usec > nextTimeout.tv_usec)
- timeout.tv_usec = 0;
- else
- timeout.tv_usec = nextTimeout.tv_usec - now.tv_usec;
- } else if (now.tv_sec < nextTimeout.tv_sec) {
- timeout.tv_sec = nextTimeout.tv_sec - now.tv_sec;
- if (now.tv_usec > nextTimeout.tv_usec)
- timeout.tv_sec--,
- timeout.tv_usec = nextTimeout.tv_usec + 1000000 -
- now.tv_usec;
- else
- timeout.tv_usec = nextTimeout.tv_usec - now.tv_usec;
- }
- } else {
- timeout.tv_sec = timeout.tv_usec = 0;
- }
-
- i = select(max + 1, &readSet, &writeSet, NULL,
- form->timer ? &timeout : NULL);
- if (i < 0) continue; /* ?? What should we do here? */
-
- if (i == 0) {
- done = 1;
- es->reason = NEWT_EXIT_TIMER;
- gettimeofday(&form->lastTimeout, NULL);
- } else
- {
- if (FD_ISSET(0, &readSet)) {
-
- key = newtGetKey();
-
- if (key == NEWT_KEY_RESIZE) {
- /* newtResizeScreen(1); */
- continue;
- }
-
- for (i = 0; i < form->numHotKeys; i++) {
- if (form->hotKeys[i] == key) {
- es->reason = NEWT_EXIT_HOTKEY;
- es->u.key = key;
- done = 1;
- break;
- }
- }
-
- if (key == NEWT_KEY_F1 && form->helpTag && form->helpCb)
- form->helpCb(co, form->helpTag);
-
- if (!done) {
- ev.event = EV_KEYPRESS;
- ev.u.key = key;
-
- er = sendEvent(co, ev);
-
- if (er.result == ER_EXITFORM) {
- done = 1;
- es->reason = NEWT_EXIT_COMPONENT;
- es->u.co = form->exitComp;
- }
- }
- } else {
- es->reason = NEWT_EXIT_FDREADY;
- done = 1;
- }
- }
- }
- newtRefresh();
-}
-
-static struct eventResult sendEvent(newtComponent co, struct event ev) {
- struct eventResult er;
-
- ev.when = EV_EARLY;
- er = co->ops->event(co, ev);
-
- if (er.result == ER_IGNORED) {
- ev.when = EV_NORMAL;
- er = co->ops->event(co, ev);
- }
-
- if (er.result == ER_IGNORED) {
- ev.when = EV_LATE;
- er = co->ops->event(co, ev);
- }
-
- return er;
-}
-
-static void gotoComponent(struct form * form, int newComp) {
- struct event ev;
-
- if (form->currComp != -1) {
- ev.event = EV_UNFOCUS;
- sendEvent(form->elements[form->currComp].co, ev);
- }
-
- form->currComp = newComp;
-
- if (form->currComp != -1) {
- ev.event = EV_FOCUS;
- ev.when = EV_NORMAL;
- sendEvent(form->elements[form->currComp].co, ev);
- }
-}
-
-void newtComponentAddCallback(newtComponent co, newtCallback f, void * data) {
- co->callback = f;
- co->callbackData = data;
-}
-
-void newtComponentTakesFocus(newtComponent co, int val) {
- co->takesFocus = val;
-}
-
-void newtFormSetBackground(newtComponent co, int color) {
- struct form * form = co->data;
-
- form->background = color;
-}
-
-void newtFormWatchFd(newtComponent co, int fd, int fdFlags) {
- struct form * form = co->data;
-
- form->fds = realloc(form->fds, (form->numFds + 1) * sizeof(*form->fds));
- form->fds[form->numFds].fd = fd;
- form->fds[form->numFds++].flags = fdFlags;
- if (form->maxFd < fd) form->maxFd = fd;
-}
-
-void newtSetHelpCallback(newtCallback cb) {
- helpCallback = cb;
-}
diff --git a/mdk-stage1/newt/grid.c b/mdk-stage1/newt/grid.c
deleted file mode 100644
index 37d2b2e74..000000000
--- a/mdk-stage1/newt/grid.c
+++ /dev/null
@@ -1,389 +0,0 @@
-#include <alloca.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct gridField {
- enum newtGridElement type;
- union {
- newtGrid grid;
- newtComponent co;
- } u;
- int padLeft, padTop, padRight, padBottom;
- int anchor;
- int flags;
-};
-
-struct grid_s {
- int rows, cols;
- int width, height; /* totals, -1 means unknown */
- struct gridField ** fields;
-};
-
-/* this is a bit of a hack */
-extern struct componentOps formOps[];
-
-newtGrid newtCreateGrid(int cols, int rows) {
- newtGrid grid;
-
- grid = malloc(sizeof(*grid));
- grid->rows = rows;
- grid->cols = cols;
-
- grid->fields = malloc(sizeof(*grid->fields) * cols);
- while (cols--) {
- grid->fields[cols] = malloc(sizeof(**(grid->fields)) * rows);
- memset(grid->fields[cols], 0, sizeof(**(grid->fields)) * rows);
- }
-
- grid->width = grid->height = -1;
-
- return grid;
-}
-
-void newtGridSetField(newtGrid grid, int col, int row,
- enum newtGridElement type, void * val, int padLeft,
- int padTop, int padRight, int padBottom, int anchor,
- int flags) {
- struct gridField * field = &grid->fields[col][row];
-
- if (field->type == NEWT_GRID_SUBGRID)
- newtGridFree(field->u.grid, 1);
-
- field->type = type;
- field->u.co = (void *) val;
-
- field->padLeft = padLeft;
- field->padRight = padRight;
- field->padTop = padTop;
- field->padBottom = padBottom;
- field->anchor = anchor;
- field->flags = flags;
-
- grid->width = grid->height = -1;
-}
-
-static void distSpace(int extra, int items, int * list) {
- int all, some, i;
-
- all = extra / items;
- some = extra % items;
- for (i = 0; i < items; i++) {
- list[i] += all;
- if (some) {
- list[i]++;
- some--;
- }
- }
-}
-
-static void shuffleGrid(newtGrid grid, int left, int top, int set) {
- struct gridField * field;
- int row, col;
- int i, j;
- int minWidth, minHeight;
- int * widths, * heights;
- int thisLeft, thisTop;
- int x, y, remx, remy;
-
- widths = alloca(sizeof(*widths) * grid->cols);
- memset(widths, 0, sizeof(*widths) * grid->cols);
- heights = alloca(sizeof(*heights) * grid->rows);
- memset(heights, 0, sizeof(*heights) * grid->rows);
-
- minWidth = 0;
- for (row = 0; row < grid->rows; row++) {
- i = 0;
- for (col = 0; col < grid->cols; col++) {
- field = &grid->fields[col][row];
- if (field->type == NEWT_GRID_SUBGRID) {
- /* we'll have to redo this later */
- if (field->u.grid->width == -1)
- shuffleGrid(field->u.grid, left, top, 0);
- j = field->u.grid->width;
- } else if (field->type == NEWT_GRID_COMPONENT) {
- if (field->u.co->ops == formOps)
- newtFormSetSize(field->u.co);
- j = field->u.co->width;
- } else
- j = 0;
-
- j += field->padLeft + field->padRight;
-
- if (j > widths[col]) widths[col] = j;
- i += widths[col];
- }
-
- if (i > minWidth) minWidth = i;
- }
-
- minHeight = 0;
- for (col = 0; col < grid->cols; col++) {
- i = 0;
- for (row = 0; row < grid->rows; row++) {
- field = &grid->fields[col][row];
- if (field->type == NEWT_GRID_SUBGRID) {
- /* we'll have to redo this later */
- if (field->u.grid->height == -1)
- shuffleGrid(field->u.grid, 0, 0, 0);
- j = field->u.grid->height;
- } else if (field->type == NEWT_GRID_COMPONENT){
- j = field->u.co->height;
- } else
- j = 0;
-
- j += field->padTop + field->padBottom;
-
- if (j > heights[row]) heights[row] = j;
- i += heights[row];
- }
-
- if (i > minHeight) minHeight = i;
- }
-
- /* this catches the -1 case */
- if (grid->width < minWidth) grid->width = minWidth; /* ack! */
- if (grid->height < minHeight) grid->height = minHeight; /* ditto! */
-
- if (!set) return;
-
- distSpace(grid->width - minWidth, grid->cols, widths);
- distSpace(grid->height - minHeight, grid->rows, heights);
-
- thisTop = top;
- for (row = 0; row < grid->rows; row++) {
- i = 0;
- thisLeft = left;
- for (col = 0; col < grid->cols; col++) {
- field = &grid->fields[col][row];
-
- if (field->type == NEWT_GRID_EMPTY) continue;
-
- x = thisLeft + field->padLeft;
- remx = widths[col] - field->padLeft - field->padRight;
- y = thisTop + field->padTop;
- remy = heights[row] - field->padTop - field->padBottom;
-
- if (field->type == NEWT_GRID_SUBGRID) {
- remx -= field->u.grid->width;
- remy -= field->u.grid->height;
- } else if (field->type == NEWT_GRID_COMPONENT) {
- remx -= field->u.co->width;
- remy -= field->u.co->height;
- }
-
- if (!(field->flags & NEWT_GRID_FLAG_GROWX)) {
- if (field->anchor & NEWT_ANCHOR_RIGHT)
- x += remx;
- else if (!(field->anchor & NEWT_ANCHOR_LEFT))
- x += (remx / 2);
- }
-
- if (!(field->flags & NEWT_GRID_FLAG_GROWY)) {
- if (field->anchor & NEWT_ANCHOR_BOTTOM)
- y += remx;
- else if (!(field->anchor & NEWT_ANCHOR_TOP))
- y += (remy / 2);
- }
-
- if (field->type == NEWT_GRID_SUBGRID) {
- if (field->flags & NEWT_GRID_FLAG_GROWX)
- field->u.grid->width = widths[col] - field->padLeft
- - field->padRight;
- if (field->flags & NEWT_GRID_FLAG_GROWY)
- field->u.grid->height = heights[col] - field->padTop
- - field->padBottom;
-
- shuffleGrid(field->u.grid, x, y, 1);
- } else if (field->type == NEWT_GRID_COMPONENT) {
- field->u.co->ops->place(field->u.co, x, y);
- }
-
- thisLeft += widths[col];
- }
-
- thisTop += heights[row];
- }
-}
-
-void newtGridPlace(newtGrid grid, int left, int top) {
- shuffleGrid(grid, left, top, 1);
-}
-
-void newtGridFree(newtGrid grid, int recurse) {
- int row, col;
-
- for (col = 0; col < grid->cols; col++) {
- if (recurse) {
- for (row = 0; row < grid->rows; row++) {
- if (grid->fields[col][row].type == NEWT_GRID_SUBGRID)
- newtGridFree(grid->fields[col][row].u.grid, 1);
- }
- }
-
- free(grid->fields[col]);
- }
-
- free(grid->fields);
- free(grid);
-}
-
-void newtGridGetSize(newtGrid grid, int * width, int * height) {
- if (grid->width == -1 || grid->height == -1) {
- grid->width = grid->height = -1;
- shuffleGrid(grid, 0, 0, 1);
- }
-
- *width = grid->width;
- *height = grid->height;
-}
-
-void newtGridWrappedWindow(newtGrid grid, char * title) {
- int width, height, offset = 0;
-
- newtGridGetSize(grid, &width, &height);
- if ((size_t)width < strlen(title) + 2) {
- offset = ((strlen(title) + 2) - width) / 2;
- width = strlen(title) + 2;
- }
- newtCenteredWindow(width + 2, height + 2, title);
- newtGridPlace(grid, 1 + offset, 1);
-}
-
-void newtGridWrappedWindowAt(newtGrid grid, char * title, int left, int top) {
- int width, height;
-
- newtGridGetSize(grid, &width, &height);
- newtOpenWindow(left, top, width + 2, height + 2, title);
- newtGridPlace(grid, 1, 1);
-}
-
-void newtGridAddComponentsToForm(newtGrid grid, newtComponent form,
- int recurse) {
- int row, col;
-
- for (col = 0; col < grid->cols; col++) {
- for (row = 0; row < grid->rows; row++) {
- if (grid->fields[col][row].type == NEWT_GRID_SUBGRID && recurse)
- newtGridAddComponentsToForm(grid->fields[col][row].u.grid,
- form, 1);
- else if (grid->fields[col][row].type == NEWT_GRID_COMPONENT)
- newtFormAddComponent(form, grid->fields[col][row].u.co);
- }
- }
-}
-
-/* this handles up to 50 items */
-static newtGrid stackem(int isVert, enum newtGridElement type1, void * what1,
- va_list args, int close) {
- struct item {
- enum newtGridElement type;
- void * what;
- } items[50];
- int i, num;
- newtGrid grid;
-
- items[0].type = type1, items[0].what = what1, num = 1;
- while (1) {
- items[num].type = va_arg(args, enum newtGridElement);
- if (items[num].type == NEWT_GRID_EMPTY) break;
-
- items[num].what = va_arg(args, void *);
- num++;
- }
-
- grid = newtCreateGrid(isVert ? 1 : num, isVert ? num : 1);
-
- for (i = 0; i < num; i++) {
- newtGridSetField(grid, isVert ? 0 : i, isVert ? i : 0,
- items[i].type, items[i].what,
- close ? 0 : (i ? (isVert ? 0 : 1) : 0),
- close ? 0 : (i ? (isVert ? 1 : 0) : 0), 0, 0, 0, 0);
- }
-
- return grid;
-}
-
-newtGrid newtGridHCloseStacked(enum newtGridElement type1, void * what1, ...) {
- va_list args;
- newtGrid grid;
-
- va_start(args, what1);
-
- grid = stackem(0, type1, what1, args, 1);
-
- va_start(args, what1);
-
- return grid;
-}
-
-newtGrid newtGridVCloseStacked(enum newtGridElement type1, void * what1, ...) {
- va_list args;
- newtGrid grid;
-
- va_start(args, what1);
-
- grid = stackem(1, type1, what1, args, 1);
-
- va_start(args, what1);
-
- return grid;
-}
-
-newtGrid newtGridVStacked(enum newtGridElement type1, void * what1, ...) {
- va_list args;
- newtGrid grid;
-
- va_start(args, what1);
-
- grid = stackem(1, type1, what1, args, 0);
-
- va_start(args, what1);
-
- return grid;
-}
-
-newtGrid newtGridHStacked(enum newtGridElement type1, void * what1, ...) {
- va_list args;
- newtGrid grid;
-
- va_start(args, what1);
-
- grid = stackem(0, type1, what1, args, 0);
-
- va_start(args, what1);
-
- return grid;
-}
-
-newtGrid newtGridBasicWindow(newtComponent text, newtGrid middle,
- newtGrid buttons) {
- newtGrid grid;
-
- grid = newtCreateGrid(1, 3);
- newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, text,
- 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
- newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, middle,
- 0, 1, 0, 0, 0, 0);
- newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttons,
- 0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-
- return grid;
-}
-
-newtGrid newtGridSimpleWindow(newtComponent text, newtComponent middle,
- newtGrid buttons) {
- newtGrid grid;
-
- grid = newtCreateGrid(1, 3);
- newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, text,
- 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
- newtGridSetField(grid, 0, 1, NEWT_GRID_COMPONENT, middle,
- 0, 1, 0, 0, 0, 0);
- newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttons,
- 0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-
- return grid;
-}
diff --git a/mdk-stage1/newt/label.c b/mdk-stage1/newt/label.c
deleted file mode 100644
index f1a9cebbf..000000000
--- a/mdk-stage1/newt/label.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct label {
- char * text;
- int length;
-};
-
-static void labelDraw(newtComponent co);
-static void labelDestroy(newtComponent co);
-
-static struct componentOps labelOps = {
- labelDraw,
- newtDefaultEventHandler,
- labelDestroy,
- newtDefaultPlaceHandler,
- newtDefaultMappedHandler,
-} ;
-
-newtComponent newtLabel(int left, int top, const char * text) {
- newtComponent co;
- struct label * la;
-
- co = malloc(sizeof(*co));
- la = malloc(sizeof(struct label));
- co->data = la;
-
- co->ops = &labelOps;
-
- co->height = 1;
- co->width = strlen(text);
- co->top = top;
- co->left = left;
- co->takesFocus = 0;
-
- la->length = strlen(text);
- la->text = strdup(text);
-
- return co;
-}
-
-void newtLabelSetText(newtComponent co, const char * text) {
- int newLength;
- struct label * la = co->data;
-
- newLength = strlen(text);
- if (newLength <= la->length) {
- memset(la->text, ' ', la->length);
- memcpy(la->text, text, newLength);
- } else {
- free(la->text);
- la->text = strdup(text);
- la->length = newLength;
- co->width = newLength;
- }
-
- labelDraw(co);
-}
-
-static void labelDraw(newtComponent co) {
- struct label * la = co->data;
-
- if (co->isMapped == -1) return;
-
- SLsmg_set_color(COLORSET_LABEL);
-
- newtGotorc(co->top, co->left);
- SLsmg_write_string(la->text);
-}
-
-static void labelDestroy(newtComponent co) {
- struct label * la = co->data;
-
- free(la->text);
- free(la);
- free(co);
-}
diff --git a/mdk-stage1/newt/listbox.c b/mdk-stage1/newt/listbox.c
deleted file mode 100644
index cdbf792ca..000000000
--- a/mdk-stage1/newt/listbox.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/* This goofed-up box whacked into shape by Elliot Lee <sopwith@cuc.edu>
- (from the original listbox by Erik Troan <ewt@redhat.com>)
- and contributed to newt for use under the LGPL license.
- Copyright (C) 1996, 1997 Elliot Lee */
-
-#include <slang.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-
-/* Linked list of items in the listbox */
-struct items {
- char * text;
- const void *data;
- unsigned char isSelected;
- struct items *next;
-};
-
-/* Holds all the relevant information for this listbox */
-struct listbox {
- newtComponent sb; /* Scrollbar on right side of listbox */
- int curWidth; /* size of text w/o scrollbar or border*/
- int curHeight; /* size of text w/o border */
- int sbAdjust;
- int bdxAdjust, bdyAdjust;
- int numItems, numSelected;
- int userHasSetWidth;
- int currItem, startShowItem; /* startShowItem is the first item displayed
- on the screen */
- int isActive; /* If we handle key events all the time, it seems
- to do things even when they are supposed to be for
- another button/whatever */
- struct items *boxItems;
- int grow;
- int flags; /* flags for this listbox, right now just
- NEWT_FLAG_RETURNEXIT */
-};
-
-static void listboxDraw(newtComponent co);
-static void listboxDestroy(newtComponent co);
-static struct eventResult listboxEvent(newtComponent co, struct event ev);
-static void newtListboxRealSetCurrent(newtComponent co);
-static void listboxPlace(newtComponent co, int newLeft, int newTop);
-static inline void updateWidth(newtComponent co, struct listbox * li,
- int maxField);
-static void listboxMapped(newtComponent co, int isMapped);
-
-static struct componentOps listboxOps = {
- listboxDraw,
- listboxEvent,
- listboxDestroy,
- listboxPlace,
- listboxMapped,
-};
-
-static void listboxMapped(newtComponent co, int isMapped) {
- struct listbox * li = co->data;
-
- co->isMapped = isMapped;
- if (li->sb)
- li->sb->ops->mapped(li->sb, isMapped);
-}
-
-static void listboxPlace(newtComponent co, int newLeft, int newTop) {
- struct listbox * li = co->data;
-
- co->top = newTop;
- co->left = newLeft;
-
- if (li->sb)
- li->sb->ops->place(li->sb, co->left + co->width - li->bdxAdjust - 1,
- co->top);
-}
-
-newtComponent newtListbox(int left, int top, int height, int flags) {
- newtComponent co, sb;
- struct listbox * li;
-
- if (!(co = malloc(sizeof(*co))))
- return NULL;
-
- if (!(li = malloc(sizeof(struct listbox)))) {
- free(co);
- return NULL;
- }
-
- li->boxItems = NULL;
- li->numItems = 0;
- li->currItem = 0;
- li->numSelected = 0;
- li->isActive = 0;
- li->userHasSetWidth = 0;
- li->startShowItem = 0;
- li->sbAdjust = 0;
- li->bdxAdjust = 0;
- li->bdyAdjust = 0;
- li->flags = flags & (NEWT_FLAG_RETURNEXIT | NEWT_FLAG_BORDER |
- NEWT_FLAG_MULTIPLE);
-
- if (li->flags & NEWT_FLAG_BORDER) {
- li->bdxAdjust = 2;
- li->bdyAdjust = 1;
- }
-
- co->height = height;
- li->curHeight = co->height - (2 * li->bdyAdjust);
-
- if (height) {
- li->grow = 0;
- if (flags & NEWT_FLAG_SCROLL) {
- sb = newtVerticalScrollbar(left, top + li->bdyAdjust,
- li->curHeight,
- COLORSET_LISTBOX, COLORSET_ACTLISTBOX);
- li->sbAdjust = 3;
- } else {
- sb = NULL;
- }
- } else {
- li->grow = 1;
- sb = NULL;
- }
-
- li->sb = sb;
- co->data = li;
- co->isMapped = 0;
- co->left = left;
- co->top = top;
- co->ops = &listboxOps;
- co->takesFocus = 1;
- co->callback = NULL;
-
- updateWidth(co, li, 5);
-
- return co;
-}
-
-static inline void updateWidth(newtComponent co, struct listbox * li,
- int maxField) {
- li->curWidth = maxField;
- co->width = li->curWidth + li->sbAdjust + 2 * li->bdxAdjust;
-
- if (li->sb)
- li->sb->left = co->left + co->width - li->bdxAdjust - 1;
-}
-
-void newtListboxSetCurrentByKey(newtComponent co, void * key) {
- struct listbox * li = co->data;
- struct items * item;
- int i;
-
- item = li->boxItems, i = 0;
- while (item && item->data != key)
- item = item->next, i++;
-
- if (item)
- newtListboxSetCurrent(co, i);
-}
-
-void newtListboxSetCurrent(newtComponent co, int num)
-{
- struct listbox * li = co->data;
-
- if (num >= li->numItems)
- li->currItem = li->numItems - 1;
- else if (num < 0)
- li->currItem = 0;
- else
- li->currItem = num;
-
- if (li->currItem < li->startShowItem)
- li->startShowItem = li->currItem;
- else if (li->currItem - li->startShowItem > li->curHeight - 1)
- li->startShowItem = li->currItem - li->curHeight + 1;
- if (li->startShowItem + li->curHeight > li->numItems)
- li->startShowItem = li->numItems - li->curHeight;
- if(li->startShowItem < 0)
- li->startShowItem = 0;
-
- newtListboxRealSetCurrent(co);
-}
-
-static void newtListboxRealSetCurrent(newtComponent co)
-{
- struct listbox * li = co->data;
-
- if(li->sb)
- newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
- listboxDraw(co);
- if(co->callback) co->callback(co, co->callbackData);
-}
-
-void newtListboxSetWidth(newtComponent co, int width) {
- struct listbox * li = co->data;
-
- co->width = width;
- li->curWidth = co->width - li->sbAdjust - 2 * li->bdxAdjust;
- li->userHasSetWidth = 1;
- if (li->sb) li->sb->left = co->width + co->left - 1;
- listboxDraw(co);
-}
-
-void * newtListboxGetCurrent(newtComponent co) {
- struct listbox * li = co->data;
- int i;
- struct items *item;
-
- for(i = 0, item = li->boxItems; item != NULL && i < li->currItem;
- i++, item = item->next);
-
- if (item)
- return (void *)item->data;
- else
- return NULL;
-}
-
-void newtListboxSelectItem(newtComponent co, const void * key,
- enum newtFlagsSense sense)
-{
- struct listbox * li = co->data;
- int i;
- struct items * item;
-
- item = li->boxItems, i = 0;
- while (item && item->data != key)
- item = item->next, i++;
-
- if (!item) return;
-
- if (item->isSelected)
- li->numSelected--;
-
- switch(sense) {
- case NEWT_FLAGS_RESET:
- item->isSelected = 0; break;
- case NEWT_FLAGS_SET:
- item->isSelected = 1; break;
- case NEWT_FLAGS_TOGGLE:
- item->isSelected = !item->isSelected;
- }
-
- if (item->isSelected)
- li->numSelected++;
-
- listboxDraw(co);
-}
-
-void newtListboxClearSelection(newtComponent co)
-{
- struct items *item;
- struct listbox * li = co->data;
-
- for(item = li->boxItems; item != NULL;
- item = item->next)
- item->isSelected = 0;
- li->numSelected = 0;
- listboxDraw(co);
-}
-
-/* Free the returned array after use, but NOT the values in the array */
-void ** newtListboxGetSelection(newtComponent co, int *numitems)
-{
- struct listbox * li;
- int i;
- void **retval;
- struct items *item;
-
- if(!co || !numitems) return NULL;
-
- li = co->data;
- if(!li || !li->numSelected) return NULL;
-
- retval = malloc(li->numSelected * sizeof(void *));
- for(i = 0, item = li->boxItems; item != NULL;
- item = item->next)
- if(item->isSelected)
- retval[i++] = (void *)item->data;
- *numitems = li->numSelected;
- return retval;
-}
-
-void newtListboxSetEntry(newtComponent co, int num, const char * text) {
- struct listbox * li = co->data;
- int i;
- struct items *item;
-
- for(i = 0, item = li->boxItems; item != NULL && i < num;
- i++, item = item->next);
-
- if(!item)
- return;
- else {
- free(item->text);
- item->text = strdup(text);
- }
- if (li->userHasSetWidth == 0 && strlen(text) > (size_t)li->curWidth) {
- updateWidth(co, li, strlen(text));
- }
-
- if (num >= li->startShowItem && num <= li->startShowItem + co->height)
- listboxDraw(co);
-}
-
-void newtListboxSetData(newtComponent co, int num, void * data) {
- struct listbox * li = co->data;
- int i;
- struct items *item;
-
- for(i = 0, item = li->boxItems; item != NULL && i < num;
- i++, item = item->next);
-
- item->data = data;
-}
-
-int newtListboxAppendEntry(newtComponent co, const char * text,
- const void * data) {
- struct listbox * li = co->data;
- struct items *item;
-
- if(li->boxItems) {
- for (item = li->boxItems; item->next != NULL; item = item->next);
-
- item = item->next = malloc(sizeof(struct items));
- } else {
- item = li->boxItems = malloc(sizeof(struct items));
- }
-
- if (!li->userHasSetWidth && text && (strlen(text) > (size_t)li->curWidth))
- updateWidth(co, li, strlen(text));
-
- item->text = strdup(text); item->data = data; item->next = NULL;
- item->isSelected = 0;
-
- if (li->grow)
- co->height++, li->curHeight++;
- li->numItems++;
-
- return 0;
-}
-
-int newtListboxInsertEntry(newtComponent co, const char * text,
- const void * data, void * key) {
- struct listbox * li = co->data;
- struct items *item, *t;
-
- if (li->boxItems) {
- if (key) {
- item = li->boxItems;
- while (item && item->data != key) item = item->next;
-
- if (!item) return 1;
-
- t = item->next;
- item = item->next = malloc(sizeof(struct items));
- item->next = t;
- } else {
- t = li->boxItems;
- item = li->boxItems = malloc(sizeof(struct items));
- item->next = t;
- }
- } else if (key) {
- return 1;
- } else {
- item = li->boxItems = malloc(sizeof(struct items));
- item->next = NULL;
- }
-
- if (!li->userHasSetWidth && text && (strlen(text) > (size_t)li->curWidth))
- updateWidth(co, li, strlen(text));
-
- item->text = strdup(text?text:"(null)"); item->data = data;
- item->isSelected = 0;
-
- if (li->sb)
- li->sb->left = co->left + co->width - li->bdxAdjust - 1;
- li->numItems++;
-
- listboxDraw(co);
-
- return 0;
-}
-
-int newtListboxDeleteEntry(newtComponent co, void * key) {
- struct listbox * li = co->data;
- int widest = 0, t;
- struct items *item, *item2 = NULL;
- int num;
-
- if (li->boxItems == NULL || li->numItems <= 0)
- return 0;
-
- num = 0;
-
- item2 = NULL, item = li->boxItems;
- while (item && item->data != key) {
- item2 = item;
- item = item->next;
- num++;
- }
-
- if (!item)
- return -1;
-
- if (item2)
- item2->next = item->next;
- else
- li->boxItems = item->next;
-
- free(item->text);
- free(item);
- li->numItems--;
-
- if (!li->userHasSetWidth) {
- widest = 0;
- for (item = li->boxItems; item != NULL; item = item->next)
- if ((t = strlen(item->text)) > widest) widest = t;
- }
-
- if (li->currItem >= num)
- li->currItem--;
-
- if (!li->userHasSetWidth) {
- updateWidth(co, li, widest);
- }
-
- listboxDraw(co);
-
- return 0;
-}
-
-void newtListboxClear(newtComponent co)
-{
- struct listbox * li;
- struct items *anitem, *nextitem;
- if(co == NULL || (li = co->data) == NULL)
- return;
- for(anitem = li->boxItems; anitem != NULL; anitem = nextitem) {
- nextitem = anitem->next;
- free(anitem->text);
- free(anitem);
- }
- li->numItems = li->numSelected = li->currItem = li->startShowItem = 0;
- li->boxItems = NULL;
- if (!li->userHasSetWidth)
- updateWidth(co, li, 5);
-}
-
-/* If you don't want to get back the text, pass in NULL for the ptr-ptr. Same
- goes for the data. */
-void newtListboxGetEntry(newtComponent co, int num, char **text, void **data) {
- struct listbox * li = co->data;
- int i;
- struct items *item;
-
- if (!li->boxItems || num >= li->numItems) {
- if(text)
- *text = NULL;
- if(data)
- *data = NULL;
- return;
- }
-
- i = 0;
- item = li->boxItems;
- while (item && i < num) {
- i++, item = item->next;
- }
-
- if (item) {
- if (text)
- *text = item->text;
- if (data)
- *data = (void *)item->data;
- }
-}
-
-static void listboxDraw(newtComponent co)
-{
- struct listbox * li = co->data;
- struct items *item;
- int i, j;
-
- if (!co->isMapped) return ;
-
- if(li->flags & NEWT_FLAG_BORDER) {
- if(li->isActive)
- SLsmg_set_color(NEWT_COLORSET_ACTLISTBOX);
- else
- SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
- newtDrawBox(co->left, co->top, co->width, co->height, 0);
- }
-
- if(li->sb)
- li->sb->ops->draw(li->sb);
-
- SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
- for(i = 0, item = li->boxItems; item != NULL && i < li->startShowItem;
- i++, item = item->next);
-
- j = i;
-
- for (i = 0; item != NULL && i < li->curHeight; i++, item = item->next) {
- if (!item->text) continue;
-
- newtGotorc(co->top + i + li->bdyAdjust, co->left + li->bdxAdjust);
- if(j + i == li->currItem) {
- if(item->isSelected)
- SLsmg_set_color(NEWT_COLORSET_ACTSELLISTBOX);
- else
- SLsmg_set_color(NEWT_COLORSET_ACTLISTBOX);
- } else if(item->isSelected)
- SLsmg_set_color(NEWT_COLORSET_SELLISTBOX);
- else
- SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
- SLsmg_write_nstring(item->text, li->curWidth);
-
- }
- newtGotorc(co->top + (li->currItem - li->startShowItem), co->left);
-}
-
-static struct eventResult listboxEvent(newtComponent co, struct event ev) {
- struct eventResult er;
- struct listbox * li = co->data;
- struct items *item;
- int i;
-
- er.result = ER_IGNORED;
-
- if(ev.when == EV_EARLY || ev.when == EV_LATE) {
- return er;
- }
-
- switch(ev.event) {
- case EV_KEYPRESS:
- if (!li->isActive) break;
-
- switch(ev.u.key) {
- case ' ':
- if(!(li->flags & NEWT_FLAG_MULTIPLE)) break;
- newtListboxSelectItem(co, li->boxItems[li->currItem].data,
- NEWT_FLAGS_TOGGLE);
- er.result = ER_SWALLOWED;
- /* We don't break here, because it is cool to be able to
- hold space to select a bunch of items in a list at once */
-
- case NEWT_KEY_DOWN:
- if(li->numItems <= 0) break;
- if(li->currItem < li->numItems - 1) {
- li->currItem++;
- if(li->currItem > (li->startShowItem + li->curHeight - 1)) {
- li->startShowItem = li->currItem - li->curHeight + 1;
- if(li->startShowItem + li->curHeight > li->numItems)
- li->startShowItem = li->numItems - li->curHeight;
- }
- if(li->sb)
- newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
- listboxDraw(co);
- }
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- break;
-
- case NEWT_KEY_ENTER:
- if(li->numItems <= 0) break;
- if(li->flags & NEWT_FLAG_RETURNEXIT)
- er.result = ER_EXITFORM;
- break;
-
- case NEWT_KEY_UP:
- if(li->numItems <= 0) break;
- if(li->currItem > 0) {
- li->currItem--;
- if(li->currItem < li->startShowItem)
- li->startShowItem = li->currItem;
- if(li->sb)
- newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
- listboxDraw(co);
- }
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- break;
-
- case NEWT_KEY_PGUP:
- if(li->numItems <= 0) break;
- li->startShowItem -= li->curHeight - 1;
- if(li->startShowItem < 0)
- li->startShowItem = 0;
- li->currItem -= li->curHeight - 1;
- if(li->currItem < 0)
- li->currItem = 0;
- newtListboxRealSetCurrent(co);
- er.result = ER_SWALLOWED;
- break;
-
- case NEWT_KEY_PGDN:
- if(li->numItems <= 0) break;
- li->startShowItem += li->curHeight;
- if(li->startShowItem > (li->numItems - li->curHeight)) {
- li->startShowItem = li->numItems - li->curHeight;
- }
- li->currItem += li->curHeight;
- if(li->currItem >= li->numItems) {
- li->currItem = li->numItems - 1;
- }
- newtListboxRealSetCurrent(co);
- er.result = ER_SWALLOWED;
- break;
-
- case NEWT_KEY_HOME:
- if(li->numItems <= 0) break;
- newtListboxSetCurrent(co, 0);
- er.result = ER_SWALLOWED;
- break;
-
- case NEWT_KEY_END:
- if(li->numItems <= 0) break;
- li->startShowItem = li->numItems - li->curHeight;
- if(li->startShowItem < 0)
- li->startShowItem = 0;
- li->currItem = li->numItems - 1;
- newtListboxRealSetCurrent(co);
- er.result = ER_SWALLOWED;
- break;
- default:
- if (li->numItems <= 0) break;
- if (ev.u.key < NEWT_KEY_EXTRA_BASE && isalpha(ev.u.key)) {
- for(i = 0, item = li->boxItems; item != NULL &&
- i < li->currItem; i++, item = item->next);
-
- if (item && item->text && (toupper(*item->text) == toupper(ev.u.key))) {
- item = item->next;
- i++;
- } else {
- item = li->boxItems;
- i = 0;
- }
- while (item && item->text &&
- toupper(*item->text) != toupper(ev.u.key)) {
- item = item->next;
- i++;
- }
- if (item) {
- li->currItem = i;
- if(li->currItem < li->startShowItem ||
- li->currItem > li->startShowItem)
- li->startShowItem =
- li->currItem > li->numItems - li->curHeight ?
- li->startShowItem = li->numItems - li->curHeight :
- li->currItem;
- if(li->sb)
- newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
- newtListboxRealSetCurrent(co);
- er.result = ER_SWALLOWED;
- }
- }
- }
- break;
-
- case EV_FOCUS:
- li->isActive = 1;
- listboxDraw(co);
- er.result = ER_SWALLOWED;
- break;
-
- case EV_UNFOCUS:
- li->isActive = 0;
- listboxDraw(co);
- er.result = ER_SWALLOWED;
- break;
-
- case EV_MOUSE:
- /* if this mouse click was within the listbox, make the current
- item the item clicked on. */
- /* Up scroll arrow */
- if (li->sb &&
- ev.u.mouse.x == co->left + co->width - li->bdxAdjust - 1 &&
- ev.u.mouse.y == co->top + li->bdyAdjust) {
- if(li->numItems <= 0) break;
- if(li->currItem > 0) {
- li->currItem--;
- if(li->currItem < li->startShowItem)
- li->startShowItem = li->currItem;
- if(li->sb)
- newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
- listboxDraw(co);
- }
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- break;
- }
- /* Down scroll arrow */
- if (li->sb &&
- ev.u.mouse.x == co->left + co->width - li->bdxAdjust - 1 &&
- ev.u.mouse.y == co->top + co->height - li->bdyAdjust - 1) {
- if(li->numItems <= 0) break;
- if(li->currItem < li->numItems - 1) {
- li->currItem++;
- if(li->currItem > (li->startShowItem + li->curHeight - 1)) {
- li->startShowItem = li->currItem - li->curHeight + 1;
- if(li->startShowItem + li->curHeight > li->numItems)
- li->startShowItem = li->numItems - li->curHeight;
- }
- if(li->sb)
- newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
- listboxDraw(co);
- }
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- break;
- }
- if ((ev.u.mouse.y >= co->top + li->bdyAdjust) &&
- (ev.u.mouse.y <= co->top + co->height - (li->bdyAdjust * 2)) &&
- (ev.u.mouse.x >= co->left + li->bdxAdjust) &&
- (ev.u.mouse.x <= co->left + co->width + (li->bdxAdjust * 2))) {
- li->currItem = li->startShowItem +
- (ev.u.mouse.y - li->bdyAdjust - co->top);
- newtListboxRealSetCurrent(co);
- listboxDraw(co);
- if(co->callback) co->callback(co, co->callbackData);
- er.result = ER_SWALLOWED;
- break;
- }
- }
-
- return er;
-}
-
-static void listboxDestroy(newtComponent co) {
- struct listbox * li = co->data;
- struct items * item, * nextitem;
-
- nextitem = item = li->boxItems;
-
- while (item != NULL) {
- nextitem = item->next;
- free(item->text);
- free(item);
- item = nextitem;
- }
-
- if (li->sb) li->sb->ops->destroy(li->sb);
-
- free(li);
- free(co);
-}
diff --git a/mdk-stage1/newt/newt.c b/mdk-stage1/newt/newt.c
deleted file mode 100644
index d6cb3cd96..000000000
--- a/mdk-stage1/newt/newt.c
+++ /dev/null
@@ -1,672 +0,0 @@
-#include <slang.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/signal.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <termios.h>
-#include <unistd.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct Window {
- int height, width, top, left;
- short * buffer;
- char * title;
-};
-
-struct keymap {
- char * str;
- int code;
- char * tc;
-};
-
-static struct Window windowStack[20];
-static struct Window * currentWindow = NULL;
-
-static char * helplineStack[20];
-static char ** currentHelpline = NULL;
-
-static int cursorRow, cursorCol;
-static int needResize;
-static int cursorOn = 1;
-
-static const char * defaultHelpLine =
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen"
-;
-
-const struct newtColors newtDefaultColorPalette = {
- "cyan", "black", /* root fg, bg */
- "black", "blue", /* border fg, bg */
- "white", "blue", /* window fg, bg */
- "white", "black", /* shadow fg, bg */
- "white", "blue", /* title fg, bg */
- "black", "cyan", /* button fg, bg */
- "yellow", "cyan", /* active button fg, bg */
- "yellow", "blue", /* checkbox fg, bg */
- "blue", "brown", /* active checkbox fg, bg */
- "yellow", "blue", /* entry box fg, bg */
- "white", "blue", /* label fg, bg */
- "black", "cyan", /* listbox fg, bg */
- "yellow", "cyan", /* active listbox fg, bg */
- "white", "blue", /* textbox fg, bg */
- "cyan", "black", /* active textbox fg, bg */
- "white", "blue", /* help line */
- "yellow", "blue", /* root text */
- "blue", /* scale full */
- "red", /* scale empty */
- "blue", "cyan", /* disabled entry fg, bg */
- "white", "blue", /* compact button fg, bg */
- "yellow", "red", /* active & sel listbox */
- "black", "brown" /* selected listbox */
-};
-
-static const struct keymap keymap[] = {
- { "\033OA", NEWT_KEY_UP, "kh" },
- { "\033[A", NEWT_KEY_UP, "ku" },
- { "\033OB", NEWT_KEY_DOWN, "kd" },
- { "\033[B", NEWT_KEY_DOWN, "kd" },
- { "\033[C", NEWT_KEY_RIGHT, "kr" },
- { "\033OC", NEWT_KEY_RIGHT, "kr" },
- { "\033[D", NEWT_KEY_LEFT, "kl" },
- { "\033OD", NEWT_KEY_LEFT, "kl" },
- { "\033[H", NEWT_KEY_HOME, "kh" },
- { "\033[1~", NEWT_KEY_HOME, "kh" },
- { "\033Ow", NEWT_KEY_END, "kH" },
- { "\033[4~", NEWT_KEY_END, "kH" },
-
- { "\033[3~", NEWT_KEY_DELETE, "kl" },
- { "\033[2~", NEWT_KEY_INSERT, NULL },
-
- { "\033\t", NEWT_KEY_UNTAB, NULL },
-
- { "\033[5~", NEWT_KEY_PGUP, NULL },
- { "\033[6~", NEWT_KEY_PGDN, NULL },
- { "\033V", NEWT_KEY_PGUP, "kH" },
- { "\033v", NEWT_KEY_PGUP, "kH" },
-
- { "\033[[A", NEWT_KEY_F1, NULL },
- { "\033[[B", NEWT_KEY_F2, NULL },
- { "\033[[C", NEWT_KEY_F3, NULL },
- { "\033[[D", NEWT_KEY_F4, NULL },
- { "\033[[E", NEWT_KEY_F5, NULL },
-
- { "\033OP", NEWT_KEY_F1, NULL },
- { "\033OQ", NEWT_KEY_F2, NULL },
- { "\033OR", NEWT_KEY_F3, NULL },
- { "\033OS", NEWT_KEY_F4, NULL },
-
- { "\033[11~", NEWT_KEY_F1, NULL },
- { "\033[12~", NEWT_KEY_F2, NULL },
- { "\033[13~", NEWT_KEY_F3, NULL },
- { "\033[14~", NEWT_KEY_F4, NULL },
- { "\033[15~", NEWT_KEY_F5, NULL },
- { "\033[17~", NEWT_KEY_F6, NULL },
- { "\033[18~", NEWT_KEY_F7, NULL },
- { "\033[19~", NEWT_KEY_F8, NULL },
- { "\033[20~", NEWT_KEY_F9, NULL },
- { "\033[21~", NEWT_KEY_F10, NULL },
- { "\033[23~", NEWT_KEY_F11, NULL },
- { "\033[24~", NEWT_KEY_F12, NULL },
-
- { NULL, 0, NULL }, /* LEAVE this one */
-};
-static char keyPrefix = '\033';
-
-static const char * version = "Newt windowing library version " VERSION
- " - (C) 1996-2000 Red Hat Software. "
- "Redistributable under the term of the Library "
- "GNU Public License. "
- "Written by Erik Troan\n";
-
-static newtSuspendCallback suspendCallback = NULL;
-static void * suspendCallbackData = NULL;
-
-void newtSetSuspendCallback(newtSuspendCallback cb, void * data) {
- suspendCallback = cb;
- suspendCallbackData = data;
-}
-
-static void handleSigwinch(int signum __attribute__ ((unused))) {
- needResize = 1;
-}
-
-static int getkeyInterruptHook(void) {
- return -1;
-}
-
-void newtFlushInput(void) {
- while (SLang_input_pending(0)) {
- SLang_getkey();
- }
-}
-
-void newtRefresh(void) {
- SLsmg_refresh();
-}
-
-void newtSuspend(void) {
- SLtt_set_cursor_visibility (1);
- SLsmg_suspend_smg();
- SLang_reset_tty();
- SLtt_set_cursor_visibility (cursorOn);
-}
-
-void newtResume(void) {
- SLsmg_resume_smg ();
- SLsmg_refresh();
- SLang_init_tty(0, 0, 0);
-}
-
-void newtCls(void) {
- SLsmg_set_color(NEWT_COLORSET_ROOT);
- SLsmg_gotorc(0, 0);
- SLsmg_erase_eos();
-
- newtRefresh();
-}
-
-#if defined(THIS_DOESNT_WORK)
-void newtResizeScreen(int redraw) {
- newtPushHelpLine("");
-
- SLtt_get_screen_size();
- SLang_init_tty(0, 0, 0);
-
- SLsmg_touch_lines (0, SLtt_Screen_Rows - 1);
-
- /* I don't know why I need this */
- SLsmg_refresh();
-
- newtPopHelpLine();
-
- if (redraw)
- SLsmg_refresh();
-}
-#endif
-
-int newtInit(void) {
- char * MonoValue, * MonoEnv = "NEWT_MONO";
-
- /* use the version variable just to be sure it gets included */
- strlen(version);
-
- SLtt_get_terminfo();
- SLtt_get_screen_size();
-
- MonoValue = getenv(MonoEnv);
- if ( MonoValue == NULL ) {
- SLtt_Use_Ansi_Colors = 1;
- } else {
- SLtt_Use_Ansi_Colors = 0;
- }
-
- SLsmg_init_smg();
- SLang_init_tty(0, 0, 0);
-
- newtSetColors(newtDefaultColorPalette);
- newtCursorOff();
- /*initKeymap();*/
-
- /*memset(&sa, 0, sizeof(sa));
- sa.sa_handler = handleSigwinch;
- sigaction(SIGWINCH, &sa, NULL);*/
-
- SLsignal_intr(SIGWINCH, handleSigwinch);
- SLang_getkey_intr_hook = getkeyInterruptHook;
-
-
-
- return 0;
-}
-
-int newtFinished(void) {
- SLsmg_gotorc(SLtt_Screen_Rows - 1, 0);
- newtCursorOn();
- SLsmg_refresh();
- SLsmg_reset_smg();
- SLang_reset_tty();
-
- return 0;
-}
-
-void newtSetColors(struct newtColors colors) {
- SLtt_set_color(NEWT_COLORSET_ROOT, "", colors.rootFg, colors.rootBg);
- SLtt_set_color(NEWT_COLORSET_BORDER, "", colors.borderFg, colors.borderBg);
- SLtt_set_color(NEWT_COLORSET_WINDOW, "", colors.windowFg, colors.windowBg);
- SLtt_set_color(NEWT_COLORSET_SHADOW, "", colors.shadowFg, colors.shadowBg);
- SLtt_set_color(NEWT_COLORSET_TITLE, "", colors.titleFg, colors.titleBg);
- SLtt_set_color(NEWT_COLORSET_BUTTON, "", colors.buttonFg, colors.buttonBg);
- SLtt_set_color(NEWT_COLORSET_ACTBUTTON, "", colors.actButtonFg,
- colors.actButtonBg);
- SLtt_set_color(NEWT_COLORSET_CHECKBOX, "", colors.checkboxFg,
- colors.checkboxBg);
- SLtt_set_color(NEWT_COLORSET_ACTCHECKBOX, "", colors.actCheckboxFg,
- colors.actCheckboxBg);
- SLtt_set_color(NEWT_COLORSET_ENTRY, "", colors.entryFg, colors.entryBg);
- SLtt_set_color(NEWT_COLORSET_LABEL, "", colors.labelFg, colors.labelBg);
- SLtt_set_color(NEWT_COLORSET_LISTBOX, "", colors.listboxFg,
- colors.listboxBg);
- SLtt_set_color(NEWT_COLORSET_ACTLISTBOX, "", colors.actListboxFg,
- colors.actListboxBg);
- SLtt_set_color(NEWT_COLORSET_TEXTBOX, "", colors.textboxFg,
- colors.textboxBg);
- SLtt_set_color(NEWT_COLORSET_ACTTEXTBOX, "", colors.actTextboxFg,
- colors.actTextboxBg);
- SLtt_set_color(NEWT_COLORSET_HELPLINE, "", colors.helpLineFg,
- colors.helpLineBg);
- SLtt_set_color(NEWT_COLORSET_ROOTTEXT, "", colors.rootTextFg,
- colors.rootTextBg);
-
- SLtt_set_color(NEWT_COLORSET_EMPTYSCALE, "", "black",
- colors.emptyScale);
- SLtt_set_color(NEWT_COLORSET_FULLSCALE, "", "black",
- colors.fullScale);
- SLtt_set_color(NEWT_COLORSET_DISENTRY, "", colors.disabledEntryFg,
- colors.disabledEntryBg);
-
- SLtt_set_color(NEWT_COLORSET_COMPACTBUTTON, "", colors.compactButtonFg,
- colors.compactButtonBg);
-
- SLtt_set_color(NEWT_COLORSET_ACTSELLISTBOX, "", colors.actSelListboxFg,
- colors.actSelListboxBg);
- SLtt_set_color(NEWT_COLORSET_SELLISTBOX, "", colors.selListboxFg,
- colors.selListboxBg);
-}
-
-int newtGetKey(void) {
- int key;
- char buf[10], * chptr = buf;
- const struct keymap * curr;
-
- do {
- key = SLang_getkey();
- if (key == 0xFFFF) {
- if (needResize)
- return NEWT_KEY_RESIZE;
-
- /* ignore other signals */
- continue;
- }
-
- if (key == NEWT_KEY_SUSPEND && suspendCallback)
- suspendCallback(suspendCallbackData);
- } while (key == NEWT_KEY_SUSPEND);
-
- switch (key) {
- case 'v' | 0x80:
- case 'V' | 0x80:
- return NEWT_KEY_PGUP;
-
- case 22:
- return NEWT_KEY_PGDN;
-
- return NEWT_KEY_BKSPC;
- case 0x7f:
- return NEWT_KEY_BKSPC;
-
- case 0x08:
- return NEWT_KEY_BKSPC;
-
- default:
- if (key != keyPrefix) return key;
- }
-
- memset(buf, 0, sizeof(buf));
-
- *chptr++ = key;
- while (SLang_input_pending(5)) {
- key = SLang_getkey();
- if (key == keyPrefix) {
- /* he hit unknown keys too many times -- start over */
- memset(buf, 0, sizeof(buf));
- chptr = buf;
- }
-
- *chptr++ = key;
-
- /* this search should use bsearch(), but when we only look through
- a list of 20 (or so) keymappings, it's probably faster just to
- do a inline linear search */
-
- for (curr = keymap; curr->code; curr++) {
- if (curr->str) {
- if (!strcmp(curr->str, buf))
- return curr->code;
- }
- }
- }
-
- for (curr = keymap; curr->code; curr++) {
- if (curr->str) {
- if (!strcmp(curr->str, buf))
- return curr->code;
- }
- }
-
- /* Looks like we were a bit overzealous in reading characters. Return
- just the first character, and put everything else back in the buffer
- for later */
-
- chptr--;
- while (chptr > buf)
- SLang_ungetkey(*chptr--);
-
- return *chptr;
-}
-
-void newtWaitForKey(void) {
- newtRefresh();
-
- SLang_getkey();
- newtClearKeyBuffer();
-}
-
-void newtClearKeyBuffer(void) {
- while (SLang_input_pending(1)) {
- SLang_getkey();
- }
-}
-
-int newtOpenWindow(int left, int top, int width, int height,
- const char * title) {
- int j, row, col;
- int n;
- int i;
-
- newtFlushInput();
-
- if (!currentWindow) {
- currentWindow = windowStack;
- } else {
- currentWindow++;
- }
-
- currentWindow->left = left;
- currentWindow->top = top;
- currentWindow->width = width;
- currentWindow->height = height;
- currentWindow->title = title ? strdup(title) : NULL;
-
- currentWindow->buffer = malloc(sizeof(short) * (width + 3) * (height + 3));
-
- row = top - 1;
- col = left - 1;
- n = 0;
- for (j = 0; j < height + 3; j++, row++) {
- SLsmg_gotorc(row, col);
- SLsmg_read_raw(currentWindow->buffer + n,
- currentWindow->width + 3);
- n += currentWindow->width + 3;
- }
-
- SLsmg_set_color(NEWT_COLORSET_BORDER);
- SLsmg_draw_box(top - 1, left - 1, height + 2, width + 2);
-
- if (currentWindow->title) {
- i = strlen(currentWindow->title) + 4;
- i = ((width - i) / 2) + left;
- SLsmg_gotorc(top - 1, i);
- SLsmg_set_char_set(1);
- SLsmg_write_char(SLSMG_RTEE_CHAR);
- SLsmg_set_char_set(0);
- SLsmg_write_char(' ');
- SLsmg_set_color(NEWT_COLORSET_TITLE);
- SLsmg_write_string((char *)currentWindow->title);
- SLsmg_set_color(NEWT_COLORSET_BORDER);
- SLsmg_write_char(' ');
- SLsmg_set_char_set(1);
- SLsmg_write_char(SLSMG_LTEE_CHAR);
- SLsmg_set_char_set(0);
- }
-
- SLsmg_set_color(NEWT_COLORSET_WINDOW);
- SLsmg_fill_region(top, left, height, width, ' ');
-
- SLsmg_set_color(NEWT_COLORSET_SHADOW);
- SLsmg_fill_region(top + height + 1, left, 1, width + 2, ' ');
- SLsmg_fill_region(top, left + width + 1, height + 1, 1, ' ');
-
- for (i = top; i < (top + height + 1); i++) {
- SLsmg_gotorc(i, left + width + 1);
- SLsmg_write_string(" ");
- }
-
- return 0;
-}
-
-int newtCenteredWindow(int width, int height, const char * title) {
- int top, left;
-
- top = (SLtt_Screen_Rows - height) / 2;
-
- /* I don't know why, but this seems to look better */
- if ((SLtt_Screen_Rows % 2) && (top % 2)) top--;
-
- left = (SLtt_Screen_Cols - width) / 2;
-
- newtOpenWindow(left, top, width, height, title);
-
- return 0;
-}
-
-void newtPopWindow(void) {
- int j, row, col;
- int n = 0;
-
- row = col = 0;
-
- row = currentWindow->top - 1;
- col = currentWindow->left - 1;
- for (j = 0; j < currentWindow->height + 3; j++, row++) {
- SLsmg_gotorc(row, col);
- SLsmg_write_raw(currentWindow->buffer + n,
- currentWindow->width + 3);
- n += currentWindow->width + 3;
- }
-
- free(currentWindow->buffer);
- free(currentWindow->title);
-
- if (currentWindow == windowStack)
- currentWindow = NULL;
- else
- currentWindow--;
-
- SLsmg_set_char_set(0);
-
- newtRefresh();
-}
-
-void newtGetWindowPos(int * x, int * y) {
- if (currentWindow) {
- *x = currentWindow->left;
- *y = currentWindow->top;
- } else
- *x = *y = 0;
-}
-
-void newtGetrc(int * row, int * col) {
- *row = cursorRow;
- *col = cursorCol;
-}
-
-void newtGotorc(int newRow, int newCol) {
- if (currentWindow) {
- newRow += currentWindow->top;
- newCol += currentWindow->left;
- }
-
- cursorRow = newRow;
- cursorCol = newCol;
- SLsmg_gotorc(cursorRow, cursorCol);
-}
-
-void newtDrawBox(int left, int top, int width, int height, int shadow) {
- if (currentWindow) {
- top += currentWindow->top;
- left += currentWindow->left;
- }
-
- SLsmg_draw_box(top, left, height, width);
-
- if (shadow) {
- SLsmg_set_color(NEWT_COLORSET_SHADOW);
- SLsmg_fill_region(top + height, left + 1, 1, width - 1, ' ');
- SLsmg_fill_region(top + 1, left + width, height, 1, ' ');
- }
-}
-
-void newtClearBox(int left, int top, int width, int height) {
- if (currentWindow) {
- top += currentWindow->top;
- left += currentWindow->left;
- }
-
- SLsmg_fill_region(top, left, height, width, ' ');
-}
-
-#if 0
-/* This doesn't seem to work quite right. I don't know why not, but when
- I rsh from an rxvt into a box and run this code, the machine returns
- console key's (\033[B) rather then xterm ones (\033OB). */
-static void initKeymap(void) {
- struct keymap * curr;
-
- for (curr = keymap; curr->code; curr++) {
- if (!curr->str)
- curr->str = SLtt_tgetstr(curr->tc);
- }
-
- /* Newt's keymap handling is a bit broken. It assumes that any extended
- keystrokes begin with ESC. If you're using a homebrek terminal you
- will probably need to fix this, or just yell at me and I'll be so
- ashamed of myself for doing it this way I'll fix it */
-
- keyPrefix = 0x1b; /* ESC */
-}
-#endif
-
-void newtDelay(int usecs) {
- fd_set set;
- struct timeval tv;
-
- FD_ZERO(&set);
-
- tv.tv_sec = usecs / 1000000;
- tv.tv_usec = usecs % 1000000;
-
- select(0, &set, &set, &set, &tv);
-}
-
-struct eventResult newtDefaultEventHandler(newtComponent c __attribute__ ((unused)),
- struct event ev __attribute__ ((unused))) {
- struct eventResult er;
-
- er.result = ER_IGNORED;
- return er;
-}
-
-void newtRedrawHelpLine(void) {
- char * buf;
-
- SLsmg_set_color(NEWT_COLORSET_HELPLINE);
-
- buf = alloca(SLtt_Screen_Cols + 1);
- memset(buf, ' ', SLtt_Screen_Cols);
- buf[SLtt_Screen_Cols] = '\0';
-
- if (currentHelpline)
- memcpy(buf, *currentHelpline, strlen(*currentHelpline));
-
- SLsmg_gotorc(SLtt_Screen_Rows - 1, 0);
- SLsmg_write_string(buf);
-}
-
-void newtPushHelpLine(const char * text) {
- if (!text)
- text = defaultHelpLine;
-
- if (currentHelpline)
- (*(++currentHelpline)) = strdup(text);
- else {
- currentHelpline = helplineStack;
- *currentHelpline = strdup(text);
- }
-
- newtRedrawHelpLine();
-}
-
-void newtPopHelpLine(void) {
- if (!currentHelpline) return;
-
- free(*currentHelpline);
- if (currentHelpline == helplineStack)
- currentHelpline = NULL;
- else
- currentHelpline--;
-
- newtRedrawHelpLine();
-}
-
-void newtDrawRootText(int col, int row, const char * text) {
- SLsmg_set_color(NEWT_COLORSET_ROOTTEXT);
-
- if (col < 0) {
- col = SLtt_Screen_Cols + col;
- }
-
- if (row < 0) {
- row = SLtt_Screen_Rows + row;
- }
-
- SLsmg_gotorc(row, col);
- SLsmg_write_string((char *)text);
-}
-
-int newtSetFlags(int oldFlags, int newFlags, enum newtFlagsSense sense) {
- switch (sense) {
- case NEWT_FLAGS_SET:
- return oldFlags | newFlags;
-
- case NEWT_FLAGS_RESET:
- return oldFlags & (~newFlags);
-
- case NEWT_FLAGS_TOGGLE:
- return oldFlags ^ newFlags;
-
- default:
- return oldFlags;
- }
-}
-
-void newtBell(void)
-{
- SLtt_beep();
-}
-
-void newtGetScreenSize(int * cols, int * rows) {
- if (rows) *rows = SLtt_Screen_Rows;
- if (cols) *cols = SLtt_Screen_Cols;
-}
-
-void newtDefaultPlaceHandler(newtComponent c, int newLeft, int newTop) {
- c->left = newLeft;
- c->top = newTop;
-}
-
-void newtDefaultMappedHandler(newtComponent c, int isMapped) {
- c->isMapped = isMapped;
-}
-
-void newtCursorOff(void) {
- cursorOn = 0;
- SLtt_set_cursor_visibility (cursorOn);
-}
-
-void newtCursorOn(void) {
- cursorOn = 1;
- SLtt_set_cursor_visibility (cursorOn);
-}
diff --git a/mdk-stage1/newt/newt.h b/mdk-stage1/newt/newt.h
deleted file mode 100644
index d3fd8bedc..000000000
--- a/mdk-stage1/newt/newt.h
+++ /dev/null
@@ -1,362 +0,0 @@
-#ifndef H_NEWT
-#define H_NEWT
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdarg.h>
-
-#define NEWT_COLORSET_ROOT 2
-#define NEWT_COLORSET_BORDER 3
-#define NEWT_COLORSET_WINDOW 4
-#define NEWT_COLORSET_SHADOW 5
-#define NEWT_COLORSET_TITLE 6
-#define NEWT_COLORSET_BUTTON 7
-#define NEWT_COLORSET_ACTBUTTON 8
-#define NEWT_COLORSET_CHECKBOX 9
-#define NEWT_COLORSET_ACTCHECKBOX 10
-#define NEWT_COLORSET_ENTRY 11
-#define NEWT_COLORSET_LABEL 12
-#define NEWT_COLORSET_LISTBOX 13
-#define NEWT_COLORSET_ACTLISTBOX 14
-#define NEWT_COLORSET_TEXTBOX 15
-#define NEWT_COLORSET_ACTTEXTBOX 16
-#define NEWT_COLORSET_HELPLINE 17
-#define NEWT_COLORSET_ROOTTEXT 18
-#define NEWT_COLORSET_EMPTYSCALE 19
-#define NEWT_COLORSET_FULLSCALE 20
-#define NEWT_COLORSET_DISENTRY 21
-#define NEWT_COLORSET_COMPACTBUTTON 22
-#define NEWT_COLORSET_ACTSELLISTBOX 23
-#define NEWT_COLORSET_SELLISTBOX 24
-
-#define NEWT_ARG_LAST -100000
-#define NEWT_ARG_APPEND -1
-
-struct newtColors {
- char * rootFg, * rootBg;
- char * borderFg, * borderBg;
- char * windowFg, * windowBg;
- char * shadowFg, * shadowBg;
- char * titleFg, * titleBg;
- char * buttonFg, * buttonBg;
- char * actButtonFg, * actButtonBg;
- char * checkboxFg, * checkboxBg;
- char * actCheckboxFg, * actCheckboxBg;
- char * entryFg, * entryBg;
- char * labelFg, * labelBg;
- char * listboxFg, * listboxBg;
- char * actListboxFg, * actListboxBg;
- char * textboxFg, * textboxBg;
- char * actTextboxFg, * actTextboxBg;
- char * helpLineFg, * helpLineBg;
- char * rootTextFg, * rootTextBg;
- char * emptyScale, * fullScale;
- char * disabledEntryFg, * disabledEntryBg;
- char * compactButtonFg, * compactButtonBg;
- char * actSelListboxFg, * actSelListboxBg;
- char * selListboxFg, * selListboxBg;
-};
-
-enum newtFlagsSense { NEWT_FLAGS_SET, NEWT_FLAGS_RESET, NEWT_FLAGS_TOGGLE };
-
-#define NEWT_FLAG_RETURNEXIT (1 << 0)
-#define NEWT_FLAG_HIDDEN (1 << 1)
-#define NEWT_FLAG_SCROLL (1 << 2)
-#define NEWT_FLAG_DISABLED (1 << 3)
-/* OBSOLETE #define NEWT_FLAG_NOSCROLL (1 << 4) for listboxes */
-#define NEWT_FLAG_BORDER (1 << 5)
-#define NEWT_FLAG_WRAP (1 << 6)
-#define NEWT_FLAG_NOF12 (1 << 7)
-#define NEWT_FLAG_MULTIPLE (1 << 8)
-#define NEWT_FLAG_SELECTED (1 << 9)
-#define NEWT_FLAG_CHECKBOX (1 << 10)
-#define NEWT_FLAG_PASSWORD (1 << 11) /* draw '*' of chars in entrybox */
-#define NEWT_FD_READ (1 << 0)
-#define NEWT_FD_WRITE (1 << 1)
-
-#define NEWT_CHECKBOXTREE_COLLAPSED '\0'
-#define NEWT_CHECKBOXTREE_EXPANDED '\1'
-#define NEWT_CHECKBOXTREE_UNSELECTED ' '
-#define NEWT_CHECKBOXTREE_SELECTED '*'
-
-/* Backwards compatibility */
-#define NEWT_LISTBOX_RETURNEXIT NEWT_FLAG_RETURNEXIT
-#define NEWT_ENTRY_SCROLL NEWT_FLAG_SCROLL
-#define NEWT_ENTRY_HIDDEN NEWT_FLAG_HIDDEN
-#define NEWT_ENTRY_RETURNEXIT NEWT_FLAG_RETURNEXIT
-#define NEWT_ENTRY_DISABLED NEWT_FLAG_DISABLED
-
-#define NEWT_TEXTBOX_WRAP NEWT_FLAG_WRAP
-#define NEWT_TEXTBOX_SCROLL NEWT_FLAG_SCROLL
-#define NEWT_FORM_NOF12 NEWT_FLAG_NOF12
-
-#define newtListboxAddEntry newtListboxAppendEntry
-
-
-typedef struct newtComponent_struct * newtComponent;
-
-extern const struct newtColors newtDefaultColorPalette;
-
-typedef void (*newtCallback)(newtComponent, void *);
-typedef void (*newtSuspendCallback)(void * data);
-
-int newtInit(void);
-int newtFinished(void);
-void newtCls(void);
-void newtResizeScreen(int redraw);
-void newtWaitForKey(void);
-void newtClearKeyBuffer(void);
-void newtDelay(int usecs);
-/* top, left are *not* counting the border */
-int newtOpenWindow(int left, int top, int width, int height,
- const char * title);
-int newtCenteredWindow(int width, int height, const char * title);
-void newtPopWindow(void);
-void newtSetColors(struct newtColors colors);
-void newtRefresh(void);
-void newtSuspend(void);
-void newtSetSuspendCallback(newtSuspendCallback cb, void * data);
-void newtSetHelpCallback(newtCallback cb);
-void newtResume(void);
-void newtPushHelpLine(const char * text);
-void newtRedrawHelpLine(void);
-void newtPopHelpLine(void);
-void newtDrawRootText(int col, int row, const char * text);
-void newtBell(void);
-void newtCursorOff(void);
-void newtCursorOn(void);
-
-/* Components */
-
-newtComponent newtCompactButton(int left, int top, const char * text);
-newtComponent newtButton(int left, int top, const char * text);
-newtComponent newtCheckbox(int left, int top, const char * text, char defValue,
- const char * seq, char * result);
-char newtCheckboxGetValue(newtComponent co);
-void newtCheckboxSetValue(newtComponent co, char value);
-void newtCheckboxSetFlags(newtComponent co, int flags, enum newtFlagsSense sense);
-
-
-newtComponent newtRadiobutton(int left, int top, const char * text, int isDefault,
- newtComponent prevButton);
-newtComponent newtRadioGetCurrent(newtComponent setMember);
-newtComponent newtListitem(int left, int top, const char * text, int isDefault,
- newtComponent prevItem, const void * data, int flags);
-void newtListitemSet(newtComponent co, const char * text);
-void * newtListitemGetData(newtComponent co);
-void newtGetScreenSize(int * cols, int * rows);
-
-newtComponent newtLabel(int left, int top, const char * text);
-void newtLabelSetText(newtComponent co, const char * text);
-newtComponent newtVerticalScrollbar(int left, int top, int height,
- int normalColorset, int thumbColorset);
-void newtScrollbarSet(newtComponent co, int where, int total);
-
-newtComponent newtListbox(int left, int top, int height, int flags);
-void * newtListboxGetCurrent(newtComponent co);
-void newtListboxSetCurrent(newtComponent co, int num);
-void newtListboxSetCurrentByKey(newtComponent co, void * key);
-void newtListboxSetEntry(newtComponent co, int num, const char * text);
-void newtListboxSetWidth(newtComponent co, int width);
-void newtListboxSetData(newtComponent co, int num, void * data);
-int newtListboxAppendEntry(newtComponent co, const char * text,
- const void * data);
-/* Send the key to insert after, or NULL to insert at the top */
-int newtListboxInsertEntry(newtComponent co, const char * text, const void * data, void * key);
-int newtListboxDeleteEntry(newtComponent co, void * data);
-void newtListboxClear(newtComponent co); /* removes all entries from listbox */
-void newtListboxGetEntry(newtComponent co, int num, char **text, void **data);
-/* Returns an array of data pointers from items, last element is NULL */
-void **newtListboxGetSelection(newtComponent co, int *numitems);
-void newtListboxClearSelection(newtComponent co);
-void newtListboxSelectItem(newtComponent co, const void * key,
- enum newtFlagsSense sense);
-
-newtComponent newtCheckboxTree(int left, int top, int height, int flags);
-newtComponent newtCheckboxTreeMulti(int left, int top, int height, char *seq, int flags);
-const void ** newtCheckboxTreeGetSelection(newtComponent co, int *numitems);
-const void * newtCheckboxTreeGetCurrent(newtComponent co);
-const void ** newtCheckboxTreeGetMultiSelection(newtComponent co, int *numitems, char seqnum);
-/* last item is NEWT_ARG_LAST for all of these */
-int newtCheckboxTreeAddItem(newtComponent co,
- const char * text, const void * data,
- int flags, int index, ...);
-int newtCheckboxTreeAddArray(newtComponent co,
- const char * text, const void * data,
- int flags, int * indexes);
-int * newtCheckboxTreeFindItem(newtComponent co, void * data);
-void newtCheckboxTreeSetEntry(newtComponent co, const void * data,
- const char * text);
-char newtCheckboxTreeGetEntryValue(newtComponent co, const void * data);
-void newtCheckboxTreeSetEntryValue(newtComponent co, const void * data,
- char value);
-
-newtComponent newtTextboxReflowed(int left, int top, char * text, int width,
- int flexDown, int flexUp, int flags);
-newtComponent newtTextbox(int left, int top, int width, int height, int flags);
-void newtTextboxSetText(newtComponent co, const char * text);
-void newtTextboxSetHeight(newtComponent co, int height);
-int newtTextboxGetNumLines(newtComponent co);
-char * newtReflowText(char * text, int width, int flexDown, int flexUp,
- int * actualWidth, int * actualHeight);
-
-struct newtExitStruct {
- enum { NEWT_EXIT_HOTKEY, NEWT_EXIT_COMPONENT, NEWT_EXIT_FDREADY,
- NEWT_EXIT_TIMER } reason;
- union {
- int key;
- newtComponent co;
- } u;
-} ;
-
-newtComponent newtForm(newtComponent vertBar, void * helpTag, int flags);
-void newtFormSetTimer(newtComponent form, int millisecs);
-void newtFormWatchFd(newtComponent form, int fd, int fdFlags);
-void newtFormSetSize(newtComponent co);
-newtComponent newtFormGetCurrent(newtComponent co);
-void newtFormSetBackground(newtComponent co, int color);
-void newtFormSetCurrent(newtComponent co, newtComponent subco);
-void newtFormAddComponent(newtComponent form, newtComponent co);
-void newtFormAddComponents(newtComponent form, ...);
-void newtFormSetHeight(newtComponent co, int height);
-void newtFormSetWidth(newtComponent co, int width);
-newtComponent newtRunForm(newtComponent form); /* obsolete */
-void newtFormRun(newtComponent co, struct newtExitStruct * es);
-void newtDrawForm(newtComponent form);
-void newtFormAddHotKey(newtComponent co, int key);
-
-typedef int (*newtEntryFilter)(newtComponent entry, void * data, int ch,
- int cursor);
-newtComponent newtEntry(int left, int top, const char * initialValue, int width,
- char ** resultPtr, int flags);
-void newtEntrySet(newtComponent co, const char * value, int cursorAtEnd);
-void newtEntrySetFilter(newtComponent co, newtEntryFilter filter, void * data);
-char * newtEntryGetValue(newtComponent co);
-void newtEntrySetFlags(newtComponent co, int flags, enum newtFlagsSense sense);
-
-newtComponent newtScale(int left, int top, int width, int fullValue);
-void newtScaleSet(newtComponent co, unsigned int amount);
-
-void newtComponentAddCallback(newtComponent co, newtCallback f, void * data);
-void newtComponentTakesFocus(newtComponent co, int val);
-
-/* this also destroys all of the components (including other forms) on the
- form */
-void newtFormDestroy(newtComponent form);
-
-/* Key codes */
-
-#define NEWT_KEY_TAB '\t'
-#define NEWT_KEY_ENTER '\r'
-#define NEWT_KEY_SUSPEND '\032' /* ctrl - z*/
-#define NEWT_KEY_RETURN NEWT_KEY_ENTER
-
-#define NEWT_KEY_EXTRA_BASE 0x8000
-#define NEWT_KEY_UP NEWT_KEY_EXTRA_BASE + 1
-#define NEWT_KEY_DOWN NEWT_KEY_EXTRA_BASE + 2
-#define NEWT_KEY_LEFT NEWT_KEY_EXTRA_BASE + 4
-#define NEWT_KEY_RIGHT NEWT_KEY_EXTRA_BASE + 5
-#define NEWT_KEY_BKSPC NEWT_KEY_EXTRA_BASE + 6
-#define NEWT_KEY_DELETE NEWT_KEY_EXTRA_BASE + 7
-#define NEWT_KEY_HOME NEWT_KEY_EXTRA_BASE + 8
-#define NEWT_KEY_END NEWT_KEY_EXTRA_BASE + 9
-#define NEWT_KEY_UNTAB NEWT_KEY_EXTRA_BASE + 10
-#define NEWT_KEY_PGUP NEWT_KEY_EXTRA_BASE + 11
-#define NEWT_KEY_PGDN NEWT_KEY_EXTRA_BASE + 12
-#define NEWT_KEY_INSERT NEWT_KEY_EXTRA_BASE + 13
-
-#define NEWT_KEY_F1 NEWT_KEY_EXTRA_BASE + 101
-#define NEWT_KEY_F2 NEWT_KEY_EXTRA_BASE + 102
-#define NEWT_KEY_F3 NEWT_KEY_EXTRA_BASE + 103
-#define NEWT_KEY_F4 NEWT_KEY_EXTRA_BASE + 104
-#define NEWT_KEY_F5 NEWT_KEY_EXTRA_BASE + 105
-#define NEWT_KEY_F6 NEWT_KEY_EXTRA_BASE + 106
-#define NEWT_KEY_F7 NEWT_KEY_EXTRA_BASE + 107
-#define NEWT_KEY_F8 NEWT_KEY_EXTRA_BASE + 108
-#define NEWT_KEY_F9 NEWT_KEY_EXTRA_BASE + 109
-#define NEWT_KEY_F10 NEWT_KEY_EXTRA_BASE + 110
-#define NEWT_KEY_F11 NEWT_KEY_EXTRA_BASE + 111
-#define NEWT_KEY_F12 NEWT_KEY_EXTRA_BASE + 112
-
-/* not really a key, but newtGetKey returns it */
-#define NEWT_KEY_RESIZE NEWT_KEY_EXTRA_BASE + 113
-
-#define NEWT_ANCHOR_LEFT (1 << 0)
-#define NEWT_ANCHOR_RIGHT (1 << 1)
-#define NEWT_ANCHOR_TOP (1 << 2)
-#define NEWT_ANCHOR_BOTTOM (1 << 3)
-
-#define NEWT_GRID_FLAG_GROWX (1 << 0)
-#define NEWT_GRID_FLAG_GROWY (1 << 1)
-
-typedef struct grid_s * newtGrid;
-enum newtGridElement { NEWT_GRID_EMPTY = 0,
- NEWT_GRID_COMPONENT, NEWT_GRID_SUBGRID };
-
-newtGrid newtCreateGrid(int cols, int rows);
-/* TYPE, what, TYPE, what, ..., NULL */
-newtGrid newtGridVStacked(enum newtGridElement type, void * what, ...);
-newtGrid newtGridVCloseStacked(enum newtGridElement type, void * what, ...);
-newtGrid newtGridHStacked(enum newtGridElement type1, void * what1, ...);
-newtGrid newtGridHCloseStacked(enum newtGridElement type1, void * what1, ...);
-newtGrid newtGridBasicWindow(newtComponent text, newtGrid middle,
- newtGrid buttons);
-newtGrid newtGridSimpleWindow(newtComponent text, newtComponent middle,
- newtGrid buttons);
-void newtGridSetField(newtGrid grid, int col, int row,
- enum newtGridElement type, void * val, int padLeft,
- int padTop, int padRight, int padBottom, int anchor,
- int flags);
-void newtGridPlace(newtGrid grid, int left, int top);
-#define newtGridDestroy newtGridFree
-void newtGridFree(newtGrid grid, int recurse);
-void newtGridGetSize(newtGrid grid, int * width, int * height);
-void newtGridWrappedWindow(newtGrid grid, char * title);
-void newtGridWrappedWindowAt(newtGrid grid, char * title, int left, int top);
-void newtGridAddComponentsToForm(newtGrid grid, newtComponent form,
- int recurse);
-
-/* convienve */
-newtGrid newtButtonBarv(char * button1, newtComponent * b1comp, va_list args);
-newtGrid newtButtonBar(char * button1, newtComponent * b1comp, ...);
-
-/* automatically centered and shrink wrapped */
-void newtWinMessage(char * title, char * buttonText, char * text, ...);
-void newtWinMessagev(char * title, char * buttonText, char * text,
- va_list argv);
-
-/* having separate calls for these two seems silly, but having two separate
- variable length-arg lists seems like a bad idea as well */
-
-/* Returns 0 if F12 was pressed, 1 for button1, 2 for button2 */
-int newtWinChoice(char * title, char * button1, char * button2,
- char * text, ...);
-/* Returns 0 if F12 was pressed, 1 for button1, 2 for button2,
- 3 for button3 */
-int newtWinTernary(char * title, char * button1, char * button2,
- char * button3, char * message, ...);
-
-/* Returns the button number pressed, 0 on F12 */
-int newtWinMenu(char * title, char * text, int suggestedWidth, int flexDown,
- int flexUp, int maxListHeight, char ** items, int * listItem,
- char * button1, ...);
-
-struct newtWinEntry {
- char * text;
- char ** value; /* may be initialized to set default */
- int flags;
-};
-
-/* Returns the button number pressed, 0 on F12. The final values are
- dynamically allocated, and need to be freed. */
-int newtWinEntries(char * title, char * text, int suggestedWidth, int flexDown,
- int flexUp, int dataWidth,
- struct newtWinEntry * items, char * button1, ...);
-
-#ifdef __cplusplus
-} /* End of extern "C" { */
-#endif
-
-#endif /* H_NEWT */
diff --git a/mdk-stage1/newt/newt_pr.h b/mdk-stage1/newt/newt_pr.h
deleted file mode 100644
index 76f5e2f6f..000000000
--- a/mdk-stage1/newt/newt_pr.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef H_NEWT_PR
-#define H_NEWT_PR
-
-#define COLORSET_ROOT NEWT_COLORSET_ROOT
-#define COLORSET_BORDER NEWT_COLORSET_BORDER
-#define COLORSET_WINDOW NEWT_COLORSET_WINDOW
-#define COLORSET_SHADOW NEWT_COLORSET_SHADOW
-#define COLORSET_TITLE NEWT_COLORSET_TITLE
-#define COLORSET_BUTTON NEWT_COLORSET_BUTTON
-#define COLORSET_ACTBUTTON NEWT_COLORSET_ACTBUTTON
-#define COLORSET_CHECKBOX NEWT_COLORSET_CHECKBOX
-#define COLORSET_ACTCHECKBOX NEWT_COLORSET_ACTCHECKBOX
-#define COLORSET_ENTRY NEWT_COLORSET_ENTRY
-#define COLORSET_LABEL NEWT_COLORSET_LABEL
-#define COLORSET_LISTBOX NEWT_COLORSET_LISTBOX
-#define COLORSET_ACTLISTBOX NEWT_COLORSET_ACTLISTBOX
-#define COLORSET_TEXTBOX NEWT_COLORSET_TEXTBOX
-#define COLORSET_ACTTEXTBOX NEWT_COLORSET_ACTTEXTBOX
-
-int newtSetFlags(int oldFlags, int newFlags, enum newtFlagsSense sense);
-
-void newtGotorc(int row, int col);
-void newtGetrc(int * row, int * col);
-void newtGetWindowPos(int * x, int * y);
-void newtDrawBox(int left, int top, int width, int height, int shadow);
-void newtClearBox(int left, int top, int width, int height);
-
-int newtGetKey(void);
-
-struct newtComponent_struct {
- /* common data */
- int height, width;
- int top, left;
- int takesFocus;
- int isMapped;
-
- struct componentOps * ops;
-
- newtCallback callback;
- void * callbackData;
-
- void * data;
-} ;
-
-enum eventResultTypes { ER_IGNORED, ER_SWALLOWED, ER_EXITFORM, ER_SETFOCUS,
- ER_NEXTCOMP };
-struct eventResult {
- enum eventResultTypes result;
- union {
- newtComponent focus;
- } u;
-};
-
-enum eventTypes { EV_FOCUS, EV_UNFOCUS, EV_KEYPRESS, EV_MOUSE };
-enum eventSequence { EV_EARLY, EV_NORMAL, EV_LATE };
-
-struct event {
- enum eventTypes event;
- enum eventSequence when;
- union {
- int key;
- struct {
- enum { MOUSE_MOTION, MOUSE_BUTTON_DOWN, MOUSE_BUTTON_UP } type;
- int x, y;
- } mouse;
- } u;
-} ;
-
-struct componentOps {
- void (* draw)(newtComponent c);
- struct eventResult (* event)(newtComponent c, struct event ev);
- void (* destroy)(newtComponent c);
- void (* place)(newtComponent c, int newLeft, int newTop);
- void (* mapped)(newtComponent c, int isMapped);
-} ;
-
-void newtDefaultPlaceHandler(newtComponent c, int newLeft, int newTop);
-void newtDefaultMappedHandler(newtComponent c, int isMapped);
-struct eventResult newtDefaultEventHandler(newtComponent c,
- struct event ev);
-
-#endif /* H_NEWT_PR */
diff --git a/mdk-stage1/newt/scale.c b/mdk-stage1/newt/scale.c
deleted file mode 100644
index 800958580..000000000
--- a/mdk-stage1/newt/scale.c
+++ /dev/null
@@ -1,72 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct scale {
- int fullValue;
- int charsSet;
-};
-
-static void scaleDraw(newtComponent co);
-
-static struct componentOps scaleOps = {
- scaleDraw,
- newtDefaultEventHandler,
- NULL,
- newtDefaultPlaceHandler,
- newtDefaultMappedHandler,
-} ;
-
-newtComponent newtScale(int left, int top, int width, int fullValue) {
- newtComponent co;
- struct scale * sc;
-
- co = malloc(sizeof(*co));
- sc = malloc(sizeof(struct scale));
- co->data = sc;
-
- co->ops = &scaleOps;
-
- co->height = 1;
- co->width = width;
- co->top = top;
- co->left = left;
- co->takesFocus = 0;
-
- sc->fullValue = fullValue;
- sc->charsSet = 0;
-
- return co;
-}
-
-void newtScaleSet(newtComponent co, unsigned int amount) {
- struct scale * sc = co->data;
- int newCharsSet;
-
- newCharsSet = (amount * co->width) / sc->fullValue;
-
- if (newCharsSet != sc->charsSet) {
- sc->charsSet = newCharsSet;
- scaleDraw(co);
- }
-}
-
-static void scaleDraw(newtComponent co) {
- struct scale * sc = co->data;
- int i;
-
- if (co->top == -1) return;
-
- newtGotorc(co->top, co->left);
-
- SLsmg_set_color(NEWT_COLORSET_FULLSCALE);
- for (i = 0; i < sc->charsSet; i++)
- SLsmg_write_string(" ");
-
- SLsmg_set_color(NEWT_COLORSET_EMPTYSCALE);
- for (i = 0; i < (co->width - sc->charsSet); i++)
- SLsmg_write_string(" ");
-}
diff --git a/mdk-stage1/newt/scrollbar.c b/mdk-stage1/newt/scrollbar.c
deleted file mode 100644
index cb4bc2757..000000000
--- a/mdk-stage1/newt/scrollbar.c
+++ /dev/null
@@ -1,124 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct scrollbar {
- int curr;
- int cs, csThumb;
- int arrows;
-} ;
-
-static void sbDraw(newtComponent co);
-static void sbDestroy(newtComponent co);
-static void sbDrawThumb(newtComponent co, int isOn);
-
-static struct componentOps sbOps = {
- sbDraw,
- newtDefaultEventHandler,
- sbDestroy,
- newtDefaultPlaceHandler,
- newtDefaultMappedHandler,
-} ;
-
-void newtScrollbarSet(newtComponent co, int where, int total) {
- struct scrollbar * sb = co->data;
- int new;
-
- if (sb->arrows)
- new = (where * (co->height - 3)) / (total ? total : 1) + 1;
- else
- new = (where * (co->height - 1)) / (total ? total : 1);
- if (new != sb->curr) {
- sbDrawThumb(co, 0);
- sb->curr = new;
- sbDrawThumb(co, 1);
- }
-}
-
-newtComponent newtVerticalScrollbar(int left, int top, int height,
- int normalColorset, int thumbColorset) {
- newtComponent co;
- struct scrollbar * sb;
-
- co = malloc(sizeof(*co));
- sb = malloc(sizeof(*sb));
- co->data = sb;
-
- if (!strcmp(getenv("TERM"), "linux") && height >= 2) {
- sb->arrows = 1;
- sb->curr = 1;
- } else {
- sb->arrows = 0;
- sb->curr = 0;
- }
- sb->cs = normalColorset;
- sb->csThumb = thumbColorset;
-
- co->ops = &sbOps;
- co->isMapped = 0;
- co->left = left;
- co->top = top;
- co->height = height;
- co->width = 1;
- co->takesFocus = 0;
-
- return co;
-}
-
-static void sbDraw(newtComponent co) {
- struct scrollbar * sb = co->data;
- int i;
-
- if (!co->isMapped) return;
-
- SLsmg_set_color(sb->cs);
-
- SLsmg_set_char_set(1);
- if (sb->arrows) {
- newtGotorc(co->top, co->left);
- SLsmg_write_char('\x2d');
- for (i = 1; i < co->height - 1; i++) {
- newtGotorc(i + co->top, co->left);
- SLsmg_write_char('\x61');
- }
- newtGotorc(co->top + co->height - 1, co->left);
- SLsmg_write_char('\x2e');
- } else {
- for (i = 0; i < co->height; i++) {
- newtGotorc(i + co->top, co->left);
- SLsmg_write_char('\x61');
- }
- }
-
- SLsmg_set_char_set(0);
-
- sbDrawThumb(co, 1);
-}
-
-static void sbDrawThumb(newtComponent co, int isOn) {
- struct scrollbar * sb = co->data;
- char ch = isOn ? '#' : '\x61';
-
- if (!co->isMapped) return;
-
- newtGotorc(sb->curr + co->top, co->left);
- SLsmg_set_char_set(1);
-
- /*if (isOn)
- SLsmg_set_color(sb->csThumb);
- else*/
- SLsmg_set_color(sb->cs);
-
- SLsmg_write_char(ch);
- SLsmg_set_char_set(0);
-}
-
-static void sbDestroy(newtComponent co) {
- struct scrollbar * sb = co->data;
-
- free(sb);
- free(co);
-}
diff --git a/mdk-stage1/newt/textbox.c b/mdk-stage1/newt/textbox.c
deleted file mode 100644
index 8eb4ae4db..000000000
--- a/mdk-stage1/newt/textbox.c
+++ /dev/null
@@ -1,409 +0,0 @@
-#include <ctype.h>
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct textbox {
- char ** lines;
- int numLines;
- int linesAlloced;
- int doWrap;
- newtComponent sb;
- int topLine;
- int textWidth;
-};
-
-static char * expandTabs(const char * text);
-static void textboxDraw(newtComponent co);
-static void addLine(newtComponent co, const char * s, int len);
-static void doReflow(const char * text, char ** resultPtr, int width,
- int * badness, int * heightPtr);
-static struct eventResult textboxEvent(newtComponent c,
- struct event ev);
-static void textboxDestroy(newtComponent co);
-static void textboxPlace(newtComponent co, int newLeft, int newTop);
-static void textboxMapped(newtComponent co, int isMapped);
-
-static struct componentOps textboxOps = {
- textboxDraw,
- textboxEvent,
- textboxDestroy,
- textboxPlace,
- textboxMapped,
-} ;
-
-static void textboxMapped(newtComponent co, int isMapped) {
- struct textbox * tb = co->data;
-
- co->isMapped = isMapped;
- if (tb->sb)
- tb->sb->ops->mapped(tb->sb, isMapped);
-}
-
-static void textboxPlace(newtComponent co, int newLeft, int newTop) {
- struct textbox * tb = co->data;
-
- co->top = newTop;
- co->left = newLeft;
-
- if (tb->sb)
- tb->sb->ops->place(tb->sb, co->left + co->width - 1, co->top);
-}
-
-void newtTextboxSetHeight(newtComponent co, int height) {
- co->height = height;
-}
-
-int newtTextboxGetNumLines(newtComponent co) {
- struct textbox * tb = co->data;
-
- return (tb->numLines);
-}
-
-newtComponent newtTextboxReflowed(int left, int top, char * text, int width,
- int flexDown, int flexUp, int flags __attribute__ ((unused))) {
- newtComponent co;
- char * reflowedText;
- int actWidth, actHeight;
-
- reflowedText = newtReflowText(text, width, flexDown, flexUp,
- &actWidth, &actHeight);
-
- co = newtTextbox(left, top, actWidth, actHeight, NEWT_FLAG_WRAP);
- newtTextboxSetText(co, reflowedText);
- free(reflowedText);
-
- return co;
-}
-
-newtComponent newtTextbox(int left, int top, int width, int height, int flags) {
- newtComponent co;
- struct textbox * tb;
-
- co = malloc(sizeof(*co));
- tb = malloc(sizeof(*tb));
- co->data = tb;
-
- co->ops = &textboxOps;
-
- co->height = height;
- co->top = top;
- co->left = left;
- co->takesFocus = 0;
- co->width = width;
-
- tb->doWrap = flags & NEWT_FLAG_WRAP;
- tb->numLines = 0;
- tb->linesAlloced = 0;
- tb->lines = NULL;
- tb->topLine = 0;
- tb->textWidth = width;
-
- if (flags & NEWT_FLAG_SCROLL) {
- co->width += 2;
- tb->sb = newtVerticalScrollbar(co->left + co->width - 1, co->top,
- co->height, COLORSET_TEXTBOX, COLORSET_TEXTBOX);
- } else {
- tb->sb = NULL;
- }
-
- return co;
-}
-
-static char * expandTabs(const char * text) {
- int bufAlloced = strlen(text) + 40;
- char * buf, * dest;
- const char * src;
- int bufUsed = 0;
- int linePos = 0;
- int i;
-
- buf = malloc(bufAlloced + 1);
- for (src = text, dest = buf; *src; src++) {
- if ((bufUsed + 10) > bufAlloced) {
- bufAlloced += strlen(text) / 2;
- buf = realloc(buf, bufAlloced + 1);
- dest = buf + bufUsed;
- }
- if (*src == '\t') {
- i = 8 - (linePos & 8);
- memset(dest, ' ', i);
- dest += i, bufUsed += i, linePos += i;
- } else {
- if (*src == '\n')
- linePos = 0;
- else
- linePos++;
-
- *dest++ = *src;
- bufUsed++;
- }
- }
-
- *dest = '\0';
- return buf;
-}
-
-#define iseuckanji(c) (0xa1 <= (unsigned char)(c&0xff) && (unsigned char)(c&0xff) <= 0xfe)
-
-static void doReflow(const char * text, char ** resultPtr, int width,
- int * badness, int * heightPtr) {
- char * result = NULL;
- const char * chptr, * end;
- int i;
- int howbad = 0;
- int height = 0;
- int kanji = 0;
-
- if (resultPtr) {
- /* XXX I think this will work */
- result = malloc(strlen(text) + (strlen(text) / width) + 50);
- *result = '\0';
- }
-
- while (*text) {
- kanji = 0;
- end = strchr(text, '\n');
- if (!end)
- end = text + strlen(text);
-
- while (*text && text < end) {
- if (end - text < width) {
- if (result) {
- strncat(result, text, end - text);
- strcat(result, "\n");
- height++;
- }
-
- if (end - text < (width / 2))
- howbad += ((width / 2) - (end - text)) / 2;
- text = end;
- if (*text) text++;
- } else {
- chptr = text;
- kanji = 0;
- for ( i = 0; i < width - 1; i++ ) {
- if ( !iseuckanji(*chptr)) {
- kanji = 0;
- } else if ( kanji == 1 ) {
- kanji = 2;
- } else {
- kanji = 1;
- }
- chptr++;
- }
- if (kanji == 0) {
- while (chptr > text && !isspace(*chptr)) chptr--;
- while (chptr > text && isspace(*chptr)) chptr--;
- chptr++;
- }
-
- if (chptr-text == 1 && !isspace(*chptr))
- chptr = text + width - 1;
-
- if (chptr > text)
- howbad += width - (chptr - text) + 1;
- if (result) {
- if (kanji == 1) {
- strncat(result, text, chptr - text + 1);
- chptr++;
- kanji = 0;
- } else {
- strncat(result, text, chptr - text);
- }
- strcat(result, "\n");
- height++;
- }
-
- if (isspace(*chptr))
- text = chptr + 1;
- else
- text = chptr;
- while (isspace(*text)) text++;
- }
- }
- }
-
-// if (result) printf("result: %s\n", result);
-
- if (badness) *badness = howbad;
- if (resultPtr) *resultPtr = result;
- if (heightPtr) *heightPtr = height;
-}
-
-char * newtReflowText(char * text, int width, int flexDown, int flexUp,
- int * actualWidth, int * actualHeight) {
- int min, max;
- int i;
- char * result;
- int minbad, minbadwidth, howbad;
- char * expandedText;
-
- expandedText = expandTabs(text);
-
- if (flexDown || flexUp) {
- min = width - flexDown;
- max = width + flexUp;
-
- minbad = -1;
- minbadwidth = width;
-
- for (i = min; i <= max; i++) {
- doReflow(expandedText, NULL, i, &howbad, NULL);
-
- if (minbad == -1 || howbad < minbad) {
- minbad = howbad;
- minbadwidth = i;
- }
- }
-
- width = minbadwidth;
- }
-
- doReflow(expandedText, &result, width, NULL, actualHeight);
- free(expandedText);
- if (actualWidth) *actualWidth = width;
- return result;
-}
-
-void newtTextboxSetText(newtComponent co, const char * text) {
- const char * start, * end;
- struct textbox * tb = co->data;
- char * reflowed, * expanded;
- int badness, height;
-
- if (tb->lines) {
- free(tb->lines);
- tb->linesAlloced = tb->numLines = 0;
- }
-
- expanded = expandTabs(text);
-
- if (tb->doWrap) {
- doReflow(expanded, &reflowed, tb->textWidth, &badness, &height);
- free(expanded);
- expanded = reflowed;
- }
-
- for (start = expanded; *start; start++)
- if (*start == '\n') tb->linesAlloced++;
-
- /* This ++ leaves room for an ending line w/o a \n */
- tb->linesAlloced++;
- tb->lines = malloc(sizeof(char *) * tb->linesAlloced);
-
- start = expanded;
- while ((end = strchr(start, '\n'))) {
- addLine(co, start, end - start);
- start = end + 1;
- }
-
- if (*start)
- addLine(co, start, strlen(start));
-
- free(expanded);
-}
-
-/* This assumes the buffer is allocated properly! */
-static void addLine(newtComponent co, const char * s, int len) {
- struct textbox * tb = co->data;
-
- if (len > tb->textWidth) len = tb->textWidth;
-
- tb->lines[tb->numLines] = malloc(tb->textWidth + 1);
- memset(tb->lines[tb->numLines], ' ', tb->textWidth);
- memcpy(tb->lines[tb->numLines], s, len);
- tb->lines[tb->numLines++][tb->textWidth] = '\0';
-}
-
-static void textboxDraw(newtComponent c) {
- int i;
- struct textbox * tb = c->data;
- int size;
-
- if (tb->sb) {
- size = tb->numLines - c->height;
- newtScrollbarSet(tb->sb, tb->topLine, size ? size : 0);
- tb->sb->ops->draw(tb->sb);
- }
-
- SLsmg_set_color(NEWT_COLORSET_TEXTBOX);
-
- for (i = 0; (i + tb->topLine) < tb->numLines && i < c->height; i++) {
- newtGotorc(c->top + i, c->left);
- SLsmg_write_string(tb->lines[i + tb->topLine]);
- }
-}
-
-static struct eventResult textboxEvent(newtComponent co,
- struct event ev) {
- struct textbox * tb = co->data;
- struct eventResult er;
-
- er.result = ER_IGNORED;
-
- if (ev.when == EV_EARLY && ev.event == EV_KEYPRESS && tb->sb) {
- switch (ev.u.key) {
- case NEWT_KEY_UP:
- if (tb->topLine) tb->topLine--;
- textboxDraw(co);
- er.result = ER_SWALLOWED;
- break;
-
- case NEWT_KEY_DOWN:
- if (tb->topLine < (tb->numLines - co->height)) tb->topLine++;
- textboxDraw(co);
- er.result = ER_SWALLOWED;
- break;
-
- case NEWT_KEY_PGDN:
- tb->topLine += co->height;
- if (tb->topLine > (tb->numLines - co->height)) {
- tb->topLine = tb->numLines - co->height;
- if (tb->topLine < 0) tb->topLine = 0;
- }
- textboxDraw(co);
- er.result = ER_SWALLOWED;
- break;
-
- case NEWT_KEY_PGUP:
- tb->topLine -= co->height;
- if (tb->topLine < 0) tb->topLine = 0;
- textboxDraw(co);
- er.result = ER_SWALLOWED;
- break;
- }
- }
- if (ev.when == EV_EARLY && ev.event == EV_MOUSE && tb->sb) {
- /* Top scroll arrow */
- if (ev.u.mouse.x == co->width && ev.u.mouse.y == co->top) {
- if (tb->topLine) tb->topLine--;
- textboxDraw(co);
-
- er.result = ER_SWALLOWED;
- }
- /* Bottom scroll arrow */
- if (ev.u.mouse.x == co->width &&
- ev.u.mouse.y == co->top + co->height - 1) {
- if (tb->topLine < (tb->numLines - co->height)) tb->topLine++;
- textboxDraw(co);
-
- er.result = ER_SWALLOWED;
- }
- }
- return er;
-}
-
-static void textboxDestroy(newtComponent co) {
- int i;
- struct textbox * tb = co->data;
-
- for (i = 0; i < tb->numLines; i++)
- free(tb->lines[i]);
- free(tb->lines);
- free(tb);
- free(co);
-}
diff --git a/mdk-stage1/newt/windows.c b/mdk-stage1/newt/windows.c
deleted file mode 100644
index 30a8d526c..000000000
--- a/mdk-stage1/newt/windows.c
+++ /dev/null
@@ -1,275 +0,0 @@
-#include <errno.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "errno.h"
-#include "newt.h"
-
-static void * newtvwindow(char * title, char * button1, char * button2,
- char * button3, char * message, va_list args) {
- newtComponent b1, b2 = NULL, b3 = NULL, t, f, answer;
- char * buf = NULL;
- int size = 0;
- int i = 0;
- int scroll = 0;
- int width, height;
- char * flowedText;
- newtGrid grid, buttonGrid;
-
- do {
- size += 1000;
- if (buf) free(buf);
- buf = malloc(size);
- i = vsnprintf(buf, size, message, args);
- } while (i >= size || i == -1);
-
- flowedText = newtReflowText(buf, 50, 5, 5, &width, &height);
- if (height > 6) {
- free(flowedText);
- flowedText = newtReflowText(buf, 60, 5, 5, &width, &height);
- }
- free(buf);
-
- if (height > 12) {
- height = 12;
- scroll = NEWT_FLAG_SCROLL;
- }
- t = newtTextbox(-1, -1, width, height, NEWT_TEXTBOX_WRAP | scroll);
- newtTextboxSetText(t, flowedText);
- free(flowedText);
-
- if (button3) {
- buttonGrid = newtButtonBar(button1, &b1, button2, &b2,
- button3, &b3, NULL);
- } else if (button2) {
- buttonGrid = newtButtonBar(button1, &b1, button2, &b2, NULL);
- } else {
- buttonGrid = newtButtonBar(button1, &b1, NULL);
- }
-
- newtGridSetField(buttonGrid, 0, 0, NEWT_GRID_COMPONENT, b1,
- 0, 0, button2 ? 1 : 0, 0, 0, 0);
-
- grid = newtCreateGrid(1, 2);
- newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, t, 0, 0, 0, 0, 0, 0);
- newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, buttonGrid,
- 0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
- newtGridWrappedWindow(grid, title);
-
- f = newtForm(NULL, NULL, 0);
- newtFormAddComponents(f, t, b1, NULL);
-
- if (button2)
- newtFormAddComponent(f, b2);
- if (button3)
- newtFormAddComponent(f, b3);
-
- answer = newtRunForm(f);
- newtGridFree(grid, 1);
-
- newtFormDestroy(f);
- newtPopWindow();
-
- if (answer == f)
- return NULL;
- else if (answer == b1)
- return button1;
- else if (answer == b2)
- return button2;
-
- return button3;
-}
-
-int newtWinChoice(char * title, char * button1, char * button2,
- char * message, ...) {
- va_list args;
- void * rc;
-
- va_start(args, message);
- rc = newtvwindow(title, button1, button2, NULL, message, args);
- va_end(args);
-
- if (rc == button1)
- return 1;
- else if (rc == button2)
- return 2;
-
- return 0;
-}
-
-void newtWinMessage(char * title, char * buttonText, char * text, ...) {
- va_list args;
-
- va_start(args, text);
- newtvwindow(title, buttonText, NULL, NULL, text, args);
- va_end(args);
-}
-
-void newtWinMessagev(char * title, char * buttonText, char * text,
- va_list argv) {
- newtvwindow(title, buttonText, NULL, NULL, text, argv);
-}
-
-int newtWinTernary(char * title, char * button1, char * button2,
- char * button3, char * message, ...) {
- va_list args;
- void * rc;
-
- va_start(args, message);
- rc = newtvwindow(title, button1, button2, button3, message, args);
- va_end(args);
-
- if (rc == button1)
- return 1;
- else if (rc == button2)
- return 2;
- else if (rc == button3)
- return 3;
-
- return 0;
-}
-
-/* only supports up to 50 buttons -- shucks! */
-int newtWinMenu(char * title, char * text, int suggestedWidth, int flexDown,
- int flexUp, int maxListHeight, char ** items, int * listItem,
- char * button1, ...) {
- newtComponent textbox, listbox, result, form;
- va_list args;
- newtComponent buttons[50];
- newtGrid grid, buttonBar;
- int numButtons;
- int i, rc;
- int needScroll;
- char * buttonName;
-
- textbox = newtTextboxReflowed(-1, -1, text, suggestedWidth, flexDown,
- flexUp, 0);
-
- for (i = 0; items[i]; i++) ;
- if (i < maxListHeight) maxListHeight = i;
- needScroll = i > maxListHeight;
-
- listbox = newtListbox(-1, -1, maxListHeight,
- (needScroll ? NEWT_FLAG_SCROLL : 0) | NEWT_FLAG_RETURNEXIT);
- for (i = 0; items[i]; i++) {
- newtListboxAddEntry(listbox, items[i], (void *) (long)i);
- }
-
- newtListboxSetCurrent(listbox, *listItem);
-
- buttonName = button1, numButtons = 0;
- va_start(args, button1);
- while (buttonName) {
- buttons[numButtons] = newtButton(-1, -1, buttonName);
- numButtons++;
- buttonName = va_arg(args, char *);
- }
-
- va_end(args);
-
- buttonBar = newtCreateGrid(numButtons, 1);
- for (i = 0; i < numButtons; i++) {
- newtGridSetField(buttonBar, i, 0, NEWT_GRID_COMPONENT,
- buttons[i],
- i ? 1 : 0, 0, 0, 0, 0, 0);
- }
-
- grid = newtGridSimpleWindow(textbox, listbox, buttonBar);
- newtGridWrappedWindow(grid, title);
-
- form = newtForm(NULL, 0, 0);
- newtGridAddComponentsToForm(grid, form, 1);
- newtGridFree(grid, 1);
-
- result = newtRunForm(form);
-
- *listItem = ((long) newtListboxGetCurrent(listbox));
-
- for (rc = 0; result != buttons[rc] && rc < numButtons; rc++);
- if (rc == numButtons)
- rc = 0; /* F12 or return-on-exit (which are the same for us) */
- else
- rc++;
-
- newtFormDestroy(form);
- newtPopWindow();
-
- return rc;
-}
-
-/* only supports up to 50 buttons and entries -- shucks! */
-int newtWinEntries(char * title, char * text, int suggestedWidth, int flexDown,
- int flexUp, int dataWidth,
- struct newtWinEntry * items, char * button1, ...) {
- newtComponent buttons[50], result, form, textw;
- newtGrid grid, buttonBar, subgrid;
- int numItems;
- int rc, i;
- int numButtons;
- char * buttonName;
- va_list args;
-
- textw = newtTextboxReflowed(-1, -1, text, suggestedWidth, flexDown,
- flexUp, 0);
-
- for (numItems = 0; items[numItems].text; numItems++);
-
- buttonName = button1, numButtons = 0;
- va_start(args, button1);
- while (buttonName) {
- buttons[numButtons] = newtButton(-1, -1, buttonName);
- numButtons++;
- buttonName = va_arg(args, char *);
- }
-
- va_end(args);
-
- buttonBar = newtCreateGrid(numButtons, 1);
- for (i = 0; i < numButtons; i++) {
- newtGridSetField(buttonBar, i, 0, NEWT_GRID_COMPONENT,
- buttons[i],
- i ? 1 : 0, 0, 0, 0, 0, 0);
- }
-
- subgrid = newtCreateGrid(2, numItems);
- for (i = 0; i < numItems; i++) {
- newtGridSetField(subgrid, 0, i, NEWT_GRID_COMPONENT,
- newtLabel(-1, -1, items[i].text),
- 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
- newtGridSetField(subgrid, 1, i, NEWT_GRID_COMPONENT,
- newtEntry(-1, -1, items[i].value ?
- *items[i].value : NULL, dataWidth,
- items[i].value, items[i].flags),
- 1, 0, 0, 0, 0, 0);
- }
-
- grid = newtCreateGrid(1, 3);
- form = newtForm(NULL, 0, 0);
- newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, textw,
- 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
- newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, subgrid,
- 0, 1, 0, 0, 0, 0);
- newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttonBar,
- 0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
- newtGridAddComponentsToForm(grid, form, 1);
- newtGridWrappedWindow(grid, title);
- newtGridFree(grid, 1);
-
- result = newtRunForm(form);
-
- for (rc = 0; rc < numItems; rc++)
- *items[rc].value = strdup(*items[rc].value);
-
- for (rc = 0; result != buttons[rc] && rc < numButtons; rc++);
- if (rc == numButtons)
- rc = 0; /* F12 */
- else
- rc++;
-
- newtFormDestroy(form);
- newtPopWindow();
-
- return rc;
-}
diff --git a/mdk-stage1/nfsmount.c b/mdk-stage1/nfsmount.c
deleted file mode 100644
index 032fde60c..000000000
--- a/mdk-stage1/nfsmount.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* this is based on work from redhat, made it lighter (gc)
- */
-
-
-/* MODIFIED for Red Hat Linux installer
- * msw@redhat.com
- * o always mounts without lockd
- * o uses our own host resolution
- */
-
-/*
- * nfsmount.c -- Linux NFS mount
- * Copyright (C) 1993 Rick Sladkey <jrs@world.std.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Wed Feb 8 12:51:48 1995, biro@yggdrasil.com (Ross Biro): allow all port
- * numbers to be specified on the command line.
- *
- * Fri, 8 Mar 1996 18:01:39, Swen Thuemmler <swen@uni-paderborn.de>:
- * Omit the call to connect() for Linux version 1.3.11 or later.
- *
- * Wed Oct 1 23:55:28 1997: Dick Streefland <dick_streefland@tasking.com>
- * Implemented the "bg", "fg" and "retry" mount options for NFS.
- */
-
-/*
- * nfsmount.c,v 1.1.1.1 1993/11/18 08:40:51 jrs Exp
- */
-
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <netdb.h>
-#include <sys/mount.h>
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/utsname.h>
-#include <sys/stat.h>
-#include <arpa/inet.h>
-#include "linux-2.2/nfs.h"
-#include "linux-2.2/nfs_mount.h" //#include "mount_constants.h"
-
-#include "log.h"
-#include "dns.h"
-
-#include "nfsmount.h"
-
-
-bool_t
-xdr_fhandle(XDR *xdrs, fhandle objp)
-{
- if (!xdr_opaque(xdrs, objp, FHSIZE)) {
- return (FALSE);
- }
- return (TRUE);
-}
-
-bool_t
-xdr_fhstatus(XDR *xdrs, fhstatus *objp)
-{
-
- if (!xdr_u_int(xdrs, &objp->fhs_status)) {
- return (FALSE);
- }
- switch (objp->fhs_status) {
- case 0:
- if (!xdr_fhandle(xdrs, objp->fhstatus_u.fhs_fhandle)) {
- return (FALSE);
- }
- break;
- default:
- break;
- }
- return (TRUE);
-}
-
-bool_t
-xdr_dirpath(XDR *xdrs, dirpath *objp)
-{
-
- if (!xdr_string(xdrs, objp, MNTPATHLEN)) {
- return (FALSE);
- }
- return (TRUE);
-}
-
-
-static int nfs_mount_version = 3; /* kernel >= 2.1.32 */ /* *********** TODO for kernel 2.4, nfs-mount version 4 */
-
-
-int nfsmount_prepare(const char *spec, int *flags, char **mount_opts)
-{
- char hostdir[1024];
- CLIENT *mclient;
- char *hostname, *dirname;
- fhandle root_fhandle;
- struct timeval total_timeout;
- enum clnt_stat clnt_stat;
- static struct nfs_mount_data data;
- struct sockaddr_in server_addr;
- struct sockaddr_in mount_server_addr;
- int msock, fsock;
- struct timeval retry_timeout;
- struct fhstatus status;
- char *s;
- int port;
-
- msock = fsock = -1;
- mclient = NULL;
-
- strncpy(hostdir, spec, sizeof(hostdir));
- if ((s = (strchr(hostdir, ':')))) {
- hostname = hostdir;
- dirname = s + 1;
- *s = '\0';
- } else {
- log_message("nfsmount: format not host:dir");
- goto fail;
- }
-
- server_addr.sin_family = AF_INET;
-
- /* first, try as IP address */
- if (!inet_aton(hostname, &server_addr.sin_addr)) {
- /* failure, try as machine name */
- if (mygethostbyname(hostname, &server_addr.sin_addr))
- goto fail;
- }
-
- memcpy (&mount_server_addr, &server_addr, sizeof (mount_server_addr));
-
-
-
- /* Set default options.
- * timeo is filled in after we know whether it'll be TCP or UDP. */
- memset(&data, 0, sizeof(data));
- data.retrans = 3;
- data.acregmin = 3;
- data.acregmax = 60;
- data.acdirmin = 30;
- data.acdirmax = 60;
- data.rsize = 8192;
- data.wsize = 8192;
- data.bsize = 8192;
-#if NFS_MOUNT_VERSION >= 2
- data.namlen = NAME_MAX;
-#endif
-
-#if NFS_MOUNT_VERSION >= 3
- if (nfs_mount_version >= 3)
- data.flags |= NFS_MOUNT_NONLM; /* HACK HACK msw */
-#endif
-
- /* Adjust options if none specified */
- if (!data.timeo)
- data.timeo = 7; /* udp */
-
-
- data.version = nfs_mount_version;
- *mount_opts = (char *) &data;
-
- if (*flags & MS_REMOUNT)
- return 0;
-
-
- retry_timeout.tv_sec = 3;
- retry_timeout.tv_usec = 0;
- total_timeout.tv_sec = 20;
- total_timeout.tv_usec = 0;
-
-
- /* contact the mount daemon via TCP */
- mount_server_addr.sin_port = htons(0);
- msock = RPC_ANYSOCK;
- mclient = clnttcp_create(&mount_server_addr, MOUNTPROG, MOUNTVERS, &msock, 0, 0);
-
- /* if this fails, contact the mount daemon via UDP */
- if (!mclient) {
- mount_server_addr.sin_port = htons(0);
- msock = RPC_ANYSOCK;
- mclient = clntudp_create(&mount_server_addr, MOUNTPROG, MOUNTVERS, retry_timeout, &msock);
- }
- if (mclient) {
- /* try to mount hostname:dirname */
- mclient->cl_auth = authunix_create_default();
- clnt_stat = clnt_call(mclient, MOUNTPROC_MNT,
- (xdrproc_t) xdr_dirpath, (caddr_t) &dirname,
- (xdrproc_t) xdr_fhstatus, (caddr_t) &status,
- total_timeout);
- if (clnt_stat != RPC_SUCCESS) {
- if (errno != ECONNREFUSED) {
- log_message(clnt_sperror(mclient, "mount"));
- goto fail; /* don't retry */
- }
- log_message(clnt_sperror(mclient, "mount"));
- auth_destroy(mclient->cl_auth);
- clnt_destroy(mclient);
- mclient = 0;
- close(msock);
- }
- } else
- goto fail;
-
- if (status.fhs_status != 0) {
- if (status.fhs_status == 2)
- log_message("NFS server says: No such file or directory");
- else if (status.fhs_status == 13)
- log_message("NFS server says: Permission denied");
- else
- log_message("nfsmount prepare failed, reason given by server: %d", status.fhs_status);
- goto fail;
- }
-
- memcpy((char *) &root_fhandle, (char *) status.fhstatus_u.fhs_fhandle, sizeof (root_fhandle));
-
- /* create nfs socket for kernel */
-
- fsock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
- if (fsock < 0) {
- log_perror("nfs socket");
- goto fail;
- }
- if (bindresvport(fsock, 0) < 0) {
- log_perror("nfs bindresvport");
- goto fail;
- }
- server_addr.sin_port = PMAPPORT;
- port = pmap_getport(&server_addr, NFS_PROGRAM, NFS_VERSION, IPPROTO_UDP);
- if (port == 0)
- port = NFS_PORT;
-#ifdef NFS_MOUNT_DEBUG
- else
- log_message("used portmapper to find NFS port\n");
- log_message("using port %d for nfs deamon\n", port);
-#endif
- server_addr.sin_port = htons(port);
-
- /* prepare data structure for kernel */
-
- data.fd = fsock;
- memcpy((char *) &data.root, (char *) &root_fhandle, sizeof (root_fhandle));
- memcpy((char *) &data.addr, (char *) &server_addr, sizeof(data.addr));
- strncpy(data.hostname, hostname, sizeof(data.hostname));
-
- /* clean up */
-
- auth_destroy(mclient->cl_auth);
- clnt_destroy(mclient);
- close(msock);
- return 0;
-
- /* abort */
-
- fail:
- if (msock != -1) {
- if (mclient) {
- auth_destroy(mclient->cl_auth);
- clnt_destroy(mclient);
- }
- close(msock);
- }
- if (fsock != -1)
- close(fsock);
-
- return -1;
-}
-
diff --git a/mdk-stage1/nfsmount.h b/mdk-stage1/nfsmount.h
deleted file mode 100644
index 12ffa69a6..000000000
--- a/mdk-stage1/nfsmount.h
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- * Please do not edit this file.
- * It was generated using rpcgen.
- */
-
-#ifndef _NFSMOUNT_H_RPCGEN
-#define _NFSMOUNT_H_RPCGEN
-
-#include <rpc/rpc.h>
-
-int nfsmount_prepare(const char *spec, int *flags, char **mount_opts);
-
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part. Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user or with the express written consent of
- * Sun Microsystems, Inc.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California 94043
- */
-/*
- * Copyright (c) 1985, 1990 by Sun Microsystems, Inc.
- */
-
-/* from @(#)mount.x 1.3 91/03/11 TIRPC 1.0 */
-#ifndef _rpcsvc_mount_h
-#define _rpcsvc_mount_h
-#define MNTPATHLEN 1024
-#define MNTNAMLEN 255
-#define FHSIZE 32
-
-typedef char fhandle[FHSIZE];
-#ifdef __cplusplus
-extern "C" bool_t xdr_fhandle(XDR *, fhandle);
-#elif __STDC__
-extern bool_t xdr_fhandle(XDR *, fhandle);
-#else /* Old Style C */
-bool_t xdr_fhandle();
-#endif /* Old Style C */
-
-
-struct fhstatus {
- u_int fhs_status;
- union {
- fhandle fhs_fhandle;
- } fhstatus_u;
-};
-typedef struct fhstatus fhstatus;
-#ifdef __cplusplus
-extern "C" bool_t xdr_fhstatus(XDR *, fhstatus*);
-#elif __STDC__
-extern bool_t xdr_fhstatus(XDR *, fhstatus*);
-#else /* Old Style C */
-bool_t xdr_fhstatus();
-#endif /* Old Style C */
-
-
-typedef char *dirpath;
-#ifdef __cplusplus
-extern "C" bool_t xdr_dirpath(XDR *, dirpath*);
-#elif __STDC__
-extern bool_t xdr_dirpath(XDR *, dirpath*);
-#else /* Old Style C */
-bool_t xdr_dirpath();
-#endif /* Old Style C */
-
-
-typedef char *name;
-#ifdef __cplusplus
-extern "C" bool_t xdr_name(XDR *, name*);
-#elif __STDC__
-extern bool_t xdr_name(XDR *, name*);
-#else /* Old Style C */
-bool_t xdr_name();
-#endif /* Old Style C */
-
-
-typedef struct mountbody *mountlist;
-#ifdef __cplusplus
-extern "C" bool_t xdr_mountlist(XDR *, mountlist*);
-#elif __STDC__
-extern bool_t xdr_mountlist(XDR *, mountlist*);
-#else /* Old Style C */
-bool_t xdr_mountlist();
-#endif /* Old Style C */
-
-
-struct mountbody {
- name ml_hostname;
- dirpath ml_directory;
- mountlist ml_next;
-};
-typedef struct mountbody mountbody;
-#ifdef __cplusplus
-extern "C" bool_t xdr_mountbody(XDR *, mountbody*);
-#elif __STDC__
-extern bool_t xdr_mountbody(XDR *, mountbody*);
-#else /* Old Style C */
-bool_t xdr_mountbody();
-#endif /* Old Style C */
-
-
-typedef struct groupnode *groups;
-#ifdef __cplusplus
-extern "C" bool_t xdr_groups(XDR *, groups*);
-#elif __STDC__
-extern bool_t xdr_groups(XDR *, groups*);
-#else /* Old Style C */
-bool_t xdr_groups();
-#endif /* Old Style C */
-
-
-struct groupnode {
- name gr_name;
- groups gr_next;
-};
-typedef struct groupnode groupnode;
-#ifdef __cplusplus
-extern "C" bool_t xdr_groupnode(XDR *, groupnode*);
-#elif __STDC__
-extern bool_t xdr_groupnode(XDR *, groupnode*);
-#else /* Old Style C */
-bool_t xdr_groupnode();
-#endif /* Old Style C */
-
-
-typedef struct exportnode *exports;
-#ifdef __cplusplus
-extern "C" bool_t xdr_exports(XDR *, exports*);
-#elif __STDC__
-extern bool_t xdr_exports(XDR *, exports*);
-#else /* Old Style C */
-bool_t xdr_exports();
-#endif /* Old Style C */
-
-
-struct exportnode {
- dirpath ex_dir;
- groups ex_groups;
- exports ex_next;
-};
-typedef struct exportnode exportnode;
-#ifdef __cplusplus
-extern "C" bool_t xdr_exportnode(XDR *, exportnode*);
-#elif __STDC__
-extern bool_t xdr_exportnode(XDR *, exportnode*);
-#else /* Old Style C */
-bool_t xdr_exportnode();
-#endif /* Old Style C */
-
-
-struct ppathcnf {
- int pc_link_max;
- short pc_max_canon;
- short pc_max_input;
- short pc_name_max;
- short pc_path_max;
- short pc_pipe_buf;
- u_char pc_vdisable;
- char pc_xxx;
- short pc_mask[2];
-};
-typedef struct ppathcnf ppathcnf;
-#ifdef __cplusplus
-extern "C" bool_t xdr_ppathcnf(XDR *, ppathcnf*);
-#elif __STDC__
-extern bool_t xdr_ppathcnf(XDR *, ppathcnf*);
-#else /* Old Style C */
-bool_t xdr_ppathcnf();
-#endif /* Old Style C */
-
-#endif /*!_rpcsvc_mount_h*/
-
-#define MOUNTPROG ((u_long)100005)
-#define MOUNTVERS ((u_long)1)
-
-#ifdef __cplusplus
-#define MOUNTPROC_NULL ((u_long)0)
-extern "C" void * mountproc_null_1(void *, CLIENT *);
-extern "C" void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern "C" fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern "C" fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern "C" mountlist * mountproc_dump_1(void *, CLIENT *);
-extern "C" mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern "C" void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern "C" void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern "C" void * mountproc_umntall_1(void *, CLIENT *);
-extern "C" void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern "C" exports * mountproc_export_1(void *, CLIENT *);
-extern "C" exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern "C" exports * mountproc_exportall_1(void *, CLIENT *);
-extern "C" exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#elif __STDC__
-#define MOUNTPROC_NULL ((u_long)0)
-extern void * mountproc_null_1(void *, CLIENT *);
-extern void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern mountlist * mountproc_dump_1(void *, CLIENT *);
-extern mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern void * mountproc_umntall_1(void *, CLIENT *);
-extern void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern exports * mountproc_export_1(void *, CLIENT *);
-extern exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern exports * mountproc_exportall_1(void *, CLIENT *);
-extern exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#else /* Old Style C */
-#define MOUNTPROC_NULL ((u_long)0)
-extern void * mountproc_null_1();
-extern void * mountproc_null_1_svc();
-#define MOUNTPROC_MNT ((u_long)1)
-extern fhstatus * mountproc_mnt_1();
-extern fhstatus * mountproc_mnt_1_svc();
-#define MOUNTPROC_DUMP ((u_long)2)
-extern mountlist * mountproc_dump_1();
-extern mountlist * mountproc_dump_1_svc();
-#define MOUNTPROC_UMNT ((u_long)3)
-extern void * mountproc_umnt_1();
-extern void * mountproc_umnt_1_svc();
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern void * mountproc_umntall_1();
-extern void * mountproc_umntall_1_svc();
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern exports * mountproc_export_1();
-extern exports * mountproc_export_1_svc();
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern exports * mountproc_exportall_1();
-extern exports * mountproc_exportall_1_svc();
-#endif /* Old Style C */
-#define MOUNTVERS_POSIX ((u_long)2)
-
-#ifdef __cplusplus
-extern "C" void * mountproc_null_2(void *, CLIENT *);
-extern "C" void * mountproc_null_2_svc(void *, struct svc_req *);
-extern "C" fhstatus * mountproc_mnt_2(dirpath *, CLIENT *);
-extern "C" fhstatus * mountproc_mnt_2_svc(dirpath *, struct svc_req *);
-extern "C" mountlist * mountproc_dump_2(void *, CLIENT *);
-extern "C" mountlist * mountproc_dump_2_svc(void *, struct svc_req *);
-extern "C" void * mountproc_umnt_2(dirpath *, CLIENT *);
-extern "C" void * mountproc_umnt_2_svc(dirpath *, struct svc_req *);
-extern "C" void * mountproc_umntall_2(void *, CLIENT *);
-extern "C" void * mountproc_umntall_2_svc(void *, struct svc_req *);
-extern "C" exports * mountproc_export_2(void *, CLIENT *);
-extern "C" exports * mountproc_export_2_svc(void *, struct svc_req *);
-extern "C" exports * mountproc_exportall_2(void *, CLIENT *);
-extern "C" exports * mountproc_exportall_2_svc(void *, struct svc_req *);
-#define MOUNTPROC_PATHCONF ((u_long)7)
-extern "C" ppathcnf * mountproc_pathconf_2(dirpath *, CLIENT *);
-extern "C" ppathcnf * mountproc_pathconf_2_svc(dirpath *, struct svc_req *);
-
-#elif __STDC__
-extern void * mountproc_null_2(void *, CLIENT *);
-extern void * mountproc_null_2_svc(void *, struct svc_req *);
-extern fhstatus * mountproc_mnt_2(dirpath *, CLIENT *);
-extern fhstatus * mountproc_mnt_2_svc(dirpath *, struct svc_req *);
-extern mountlist * mountproc_dump_2(void *, CLIENT *);
-extern mountlist * mountproc_dump_2_svc(void *, struct svc_req *);
-extern void * mountproc_umnt_2(dirpath *, CLIENT *);
-extern void * mountproc_umnt_2_svc(dirpath *, struct svc_req *);
-extern void * mountproc_umntall_2(void *, CLIENT *);
-extern void * mountproc_umntall_2_svc(void *, struct svc_req *);
-extern exports * mountproc_export_2(void *, CLIENT *);
-extern exports * mountproc_export_2_svc(void *, struct svc_req *);
-extern exports * mountproc_exportall_2(void *, CLIENT *);
-extern exports * mountproc_exportall_2_svc(void *, struct svc_req *);
-#define MOUNTPROC_PATHCONF ((u_long)7)
-extern ppathcnf * mountproc_pathconf_2(dirpath *, CLIENT *);
-extern ppathcnf * mountproc_pathconf_2_svc(dirpath *, struct svc_req *);
-
-#else /* Old Style C */
-extern void * mountproc_null_2();
-extern void * mountproc_null_2_svc();
-extern fhstatus * mountproc_mnt_2();
-extern fhstatus * mountproc_mnt_2_svc();
-extern mountlist * mountproc_dump_2();
-extern mountlist * mountproc_dump_2_svc();
-extern void * mountproc_umnt_2();
-extern void * mountproc_umnt_2_svc();
-extern void * mountproc_umntall_2();
-extern void * mountproc_umntall_2_svc();
-extern exports * mountproc_export_2();
-extern exports * mountproc_export_2_svc();
-extern exports * mountproc_exportall_2();
-extern exports * mountproc_exportall_2_svc();
-#define MOUNTPROC_PATHCONF ((u_long)7)
-extern ppathcnf * mountproc_pathconf_2();
-extern ppathcnf * mountproc_pathconf_2_svc();
-#endif /* Old Style C */
-
-#endif /* !_NFSMOUNT_H_RPCGEN */
diff --git a/mdk-stage1/pci-resource/.cvsignore b/mdk-stage1/pci-resource/.cvsignore
deleted file mode 100644
index 4c7b0844b..000000000
--- a/mdk-stage1/pci-resource/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pci-ids.h
diff --git a/mdk-stage1/pci-resource/Makefile b/mdk-stage1/pci-resource/Makefile
deleted file mode 100644
index 046ab29dd..000000000
--- a/mdk-stage1/pci-resource/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
- #******************************************************************************
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-all: pci-ids.h
-
-pci-ids.h: /usr/share/ldetect-lst/pcitable update-pci-ids.pl
- perl update-pci-ids.pl > $@ || { rm -f $@; exit 1; }
-
-clean:
- rm -f pci-ids.h
diff --git a/mdk-stage1/pci-resource/update-pci-ids.pl b/mdk-stage1/pci-resource/update-pci-ids.pl
deleted file mode 100755
index 73f1d151b..000000000
--- a/mdk-stage1/pci-resource/update-pci-ids.pl
+++ /dev/null
@@ -1,46 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use MDK::Common;
-
-require '/usr/bin/merge2pcitable.pl';
-my $pci = read_pcitable("/usr/share/ldetect-lst/pcitable");
-
-print '
-#define PCI_REVISION_ID 0x08 /* Revision ID */
-
-struct pci_module_map {
- unsigned short vendor; /* PCI vendor id */
- unsigned short device; /* PCI device id */
- const char *name; /* PCI human readable name */
- const char *module; /* module to load */
-};
-
-';
-
-my %t = (
- network => 'network/main',
- medias => 'disk/scsi|hardware_raid',
-);
-
-foreach my $type (keys %t) {
- my @modules = chomp_(`perl ../../kernel/modules.pl pci_modules4stage1:"$t{$type}"`);
-
- print "#ifndef DISABLE_".uc($type)."
-struct pci_module_map ${type}_pci_ids[] = {
-";
-
- foreach my $k (sort keys %$pci) {
- my $v = $pci->{$k};
- member($v->[0], @modules) or next;
- $k =~ /^(....)(....)/;
- printf qq|\t{ 0x%s, 0x%s, "%s", "%s" },\n|,
- $1, $2, $v->[1], $v->[0];
- }
-
- print "};
-int ${type}_num_ids = sizeof(${type}_pci_ids) / sizeof(struct pci_module_map);
-#endif
-
-";
-}
diff --git a/mdk-stage1/pcmcia_/Makefile b/mdk-stage1/pcmcia_/Makefile
deleted file mode 100644
index bb3b0257e..000000000
--- a/mdk-stage1/pcmcia_/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2001 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-all: libpcmcia.a libpcmcia-DIET.a
-
-clean:
- rm -f *.o libpcmcia.a
-
-FLAGS = -D__linux__ -Wall -Werror -Os -fomit-frame-pointer -pipe -c -I..
-
-
-OBJS = probe.o cardmgr.o lex_config.o yacc_config.o
-
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-
-libpcmcia.a: $(OBJS)
- ar -cru $@ $^
- ranlib $@
-
-libpcmcia-DIET.a: $(OBJS-DIET)
- ar -cru $@ $^
- ranlib $@
-
-
-$(OBJS): %.o: %.c
- gcc $(FLAGS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
- gcc $(FLAGS) $(DIETLIBC_INCLUDES) -c $< -o $@
-
diff --git a/mdk-stage1/pcmcia_/bulkmem.h b/mdk-stage1/pcmcia_/bulkmem.h
deleted file mode 100644
index 7748d4432..000000000
--- a/mdk-stage1/pcmcia_/bulkmem.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Definitions for bulk memory services
- *
- * bulkmem.h 1.13 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- * bulkmem.h 1.3 1995/05/27 04:49:49
- */
-
-#ifndef _LINUX_BULKMEM_H
-#define _LINUX_BULKMEM_H
-
-/* For GetFirstRegion and GetNextRegion */
-typedef struct region_info_t {
- u_int Attributes;
- u_int CardOffset;
- u_int RegionSize;
- u_int AccessSpeed;
- u_int BlockSize;
- u_int PartMultiple;
- u_char JedecMfr, JedecInfo;
- memory_handle_t next;
-} region_info_t;
-
-#define REGION_TYPE 0x0001
-#define REGION_TYPE_CM 0x0000
-#define REGION_TYPE_AM 0x0001
-#define REGION_PREFETCH 0x0008
-#define REGION_CACHEABLE 0x0010
-#define REGION_BAR_MASK 0xe000
-#define REGION_BAR_SHIFT 13
-
-/* For OpenMemory */
-typedef struct open_mem_t {
- u_int Attributes;
- u_int Offset;
-} open_mem_t;
-
-/* Attributes for OpenMemory */
-#define MEMORY_TYPE 0x0001
-#define MEMORY_TYPE_CM 0x0000
-#define MEMORY_TYPE_AM 0x0001
-#define MEMORY_EXCLUSIVE 0x0002
-#define MEMORY_PREFETCH 0x0008
-#define MEMORY_CACHEABLE 0x0010
-#define MEMORY_BAR_MASK 0xe000
-#define MEMORY_BAR_SHIFT 13
-
-typedef struct eraseq_entry_t {
- memory_handle_t Handle;
- u_char State;
- u_int Size;
- u_int Offset;
- void *Optional;
-} eraseq_entry_t;
-
-typedef struct eraseq_hdr_t {
- int QueueEntryCnt;
- eraseq_entry_t *QueueEntryArray;
-} eraseq_hdr_t;
-
-#define ERASE_QUEUED 0x00
-#define ERASE_IN_PROGRESS(n) (((n) > 0) && ((n) < 0x80))
-#define ERASE_IDLE 0xff
-#define ERASE_PASSED 0xe0
-#define ERASE_FAILED 0xe1
-
-#define ERASE_MISSING 0x80
-#define ERASE_MEDIA_WRPROT 0x84
-#define ERASE_NOT_ERASABLE 0x85
-#define ERASE_BAD_OFFSET 0xc1
-#define ERASE_BAD_TECH 0xc2
-#define ERASE_BAD_SOCKET 0xc3
-#define ERASE_BAD_VCC 0xc4
-#define ERASE_BAD_VPP 0xc5
-#define ERASE_BAD_SIZE 0xc6
-
-/* For CopyMemory */
-typedef struct copy_op_t {
- u_int Attributes;
- u_int SourceOffset;
- u_int DestOffset;
- u_int Count;
-} copy_op_t;
-
-/* For ReadMemory and WriteMemory */
-typedef struct mem_op_t {
- u_int Attributes;
- u_int Offset;
- u_int Count;
-} mem_op_t;
-
-#define MEM_OP_BUFFER 0x01
-#define MEM_OP_BUFFER_USER 0x00
-#define MEM_OP_BUFFER_KERNEL 0x01
-#define MEM_OP_DISABLE_ERASE 0x02
-#define MEM_OP_VERIFY 0x04
-
-/* For RegisterMTD */
-typedef struct mtd_reg_t {
- u_int Attributes;
- u_int Offset;
- u_long MediaID;
-} mtd_reg_t;
-
-/*
- * Definitions for MTD requests
- */
-
-typedef struct mtd_request_t {
- u_int SrcCardOffset;
- u_int DestCardOffset;
- u_int TransferLength;
- u_int Function;
- u_long MediaID;
- u_int Status;
- u_int Timeout;
-} mtd_request_t;
-
-/* Fields in MTD Function */
-#define MTD_REQ_ACTION 0x003
-#define MTD_REQ_ERASE 0x000
-#define MTD_REQ_READ 0x001
-#define MTD_REQ_WRITE 0x002
-#define MTD_REQ_COPY 0x003
-#define MTD_REQ_NOERASE 0x004
-#define MTD_REQ_VERIFY 0x008
-#define MTD_REQ_READY 0x010
-#define MTD_REQ_TIMEOUT 0x020
-#define MTD_REQ_LAST 0x040
-#define MTD_REQ_FIRST 0x080
-#define MTD_REQ_KERNEL 0x100
-
-/* Status codes */
-#define MTD_WAITREQ 0x00
-#define MTD_WAITTIMER 0x01
-#define MTD_WAITRDY 0x02
-#define MTD_WAITPOWER 0x03
-
-/*
- * Definitions for MTD helper functions
- */
-
-/* For MTDModifyWindow */
-typedef struct mtd_mod_win_t {
- u_int Attributes;
- u_int AccessSpeed;
- u_int CardOffset;
-} mtd_mod_win_t;
-
-/* For MTDSetVpp */
-typedef struct mtd_vpp_req_t {
- u_char Vpp1, Vpp2;
-} mtd_vpp_req_t;
-
-/* For MTDRDYMask */
-typedef struct mtd_rdy_req_t {
- u_int Mask;
-} mtd_rdy_req_t;
-
-enum mtd_helper {
- MTDRequestWindow, MTDModifyWindow, MTDReleaseWindow,
- MTDSetVpp, MTDRDYMask
-};
-
-#ifdef IN_CARD_SERVICES
-extern int MTDHelperEntry(int func, void *a1, void *a2);
-#else
-extern int MTDHelperEntry(int func, ...);
-#endif
-
-#endif /* _LINUX_BULKMEM_H */
diff --git a/mdk-stage1/pcmcia_/cardmgr.c b/mdk-stage1/pcmcia_/cardmgr.c
deleted file mode 100644
index 1db18b55b..000000000
--- a/mdk-stage1/pcmcia_/cardmgr.c
+++ /dev/null
@@ -1,1652 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Code comes from /anonymous@projects.sourceforge.net:/pub/pcmcia-cs/pcmcia-cs-3.1.29.tar.bz2
- *
- * Licence of this code follows:
- *
- */
-/*======================================================================
-
- PCMCIA Card Manager daemon
-
- cardmgr.c 1.161 2001/08/24 12:19:19
-
- The contents of this file are subject to the Mozilla Public
- License Version 1.1 (the "License"); you may not use this file
- except in compliance with the License. You may obtain a copy of
- the License at http://www.mozilla.org/MPL/
-
- Software distributed under the License is distributed on an "AS
- IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- implied. See the License for the specific language governing
- rights and limitations under the License.
-
- The initial developer of the original code is David A. Hinds
- <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
-
- Alternatively, the contents of this file may be used under the
- terms of the GNU General Public License version 2 (the "GPL"), in
- which case the provisions of the GPL are applicable instead of the
- above. If you wish to allow the use of your version of this file
- only under the terms of the GPL and not to allow others to use
- your version of this file under the MPL, indicate your decision
- by deleting the provisions above and replace them with the notice
- and other provisions required by the GPL. If you do not delete
- the provisions above, a recipient may use your version of this
- file under either the MPL or the GPL.
-
-======================================================================*/
-
-#ifndef __linux__
-#include <pcmcia/u_compat.h>
-#endif
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-//mdk-stage1// #include <syslog.h>
-//mdk-stage1// #include <getopt.h>
-#include <signal.h>
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/wait.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/file.h>
-
-#include <pcmcia_/version.h>
-//mdk-stage1// #include <pcmcia/config.h>
-#include <pcmcia_/cs_types.h>
-#include <pcmcia_/cs.h>
-#include <pcmcia_/cistpl.h>
-#include <pcmcia_/ds.h>
-
-#include "cardmgr.h"
-
-#include "../log.h"
-#include "modules.h"
-#include "pcmcia.h"
-
-/*====================================================================*/
-
-typedef struct socket_info_t {
- int fd;
- int state;
- card_info_t *card;
- bind_info_t *bind[MAX_BINDINGS];
- mtd_ident_t *mtd[2*CISTPL_MAX_DEVICES];
-} socket_info_t;
-
-#define SOCKET_PRESENT 0x01
-#define SOCKET_READY 0x02
-#define SOCKET_HOTPLUG 0x04
-
-/* Linked list of resource adjustments */
-struct adjust_list_t *root_adjust = NULL;
-
-/* Linked list of device definitions */
-struct device_info_t *root_device = NULL;
-
-/* Special pointer to "anonymous" card definition */
-struct card_info_t *blank_card = NULL;
-
-/* Linked list of card definitions */
-struct card_info_t *root_card = NULL;
-
-/* Linked list of function definitions */
-struct card_info_t *root_func = NULL;
-
-/* Linked list of MTD definitions */
-struct mtd_ident_t *root_mtd = NULL;
-
-/* Default MTD */
-struct mtd_ident_t *default_mtd = NULL;
-
-static int sockets;
-static struct socket_info_t socket[MAX_SOCKS];
-
-/* Default path for config file, device scripts */
-#ifdef ETC
-static char *configpath = ETC;
-#else
-static char *configpath = "/etc/pcmcia";
-#endif
-
-/* Default path for pid file */
-//mdk-stage1// static char *pidfile = "/var/run/cardmgr.pid";
-
-#ifdef __linux__
-/* Default path for finding modules */
-//mdk-stage1// static char *modpath = NULL;
-#endif
-
-/* Default path for socket info table */
-static char *stabfile;
-
-/* If set, don't generate beeps when cards are inserted */
-//mdk-stage1// static int be_quiet = 0;
-
-/* If set, use modprobe instead of insmod */
-//mdk-stage1// static int do_modprobe = 0;
-
-/* If set, configure already inserted cards, then exit */
-//mdk-stage1// static int one_pass = 0;
-
-/* Extra message logging? */
-//mdk-stage1// static int verbose = 0;
-
-/*====================================================================*/
-
-#ifdef __linux__
-
-static int major = 0;
-
-static int lookup_dev(char *name)
-{
- FILE *f;
- int n;
- char s[32], t[32];
-
- f = fopen("/proc/devices", "r");
- if (f == NULL)
- return -errno;
- while (fgets(s, 32, f) != NULL) {
- if (sscanf(s, "%d %s", &n, t) == 2)
- if (strcmp(name, t) == 0)
- break;
- }
- fclose(f);
- if (strcmp(name, t) == 0)
- return n;
- else
- return -ENODEV;
-}
-
-int open_dev(dev_t dev, int mode)
-{
- char * fn = "/tmp/cardmgr_tmp";
- int fd;
-
- unlink(fn);
- if (mknod(fn, mode, dev) != 0)
- return -1;
- fd = open(fn, (mode&S_IWRITE)?O_RDWR:O_RDONLY);
- if (fd < 0)
- fd = open(fn, O_NONBLOCK|((mode&S_IWRITE)?O_RDWR:O_RDONLY));
- unlink(fn);
- return fd;
-}
-
-#endif /* __linux__ */
-
-int open_sock(int sock, int mode)
-{
-#ifdef __linux__
- dev_t dev = (major<<8)+sock;
- return open_dev(dev, mode);
-#endif
-#ifdef __BEOS__
- int fd;
- char fn[B_OS_NAME_LENGTH];
- sprintf(fn, "/dev/pcmcia/sock%d", sock);
- return open(fn, (mode & S_IWRITE) ? O_RDWR: O_RDONLY);
-#endif
-}
-
-/*======================================================================
-
- xlate_scsi_name() is a sort-of-hack used to deduce the minor
- device numbers of SCSI devices, from the information available to
- the low-level driver.
-
-======================================================================*/
-
-#ifdef __linux__
-
-#include <linux/major.h>
-#include <scsi/scsi.h>
-//mdk-stage1// #define VERSION(v,p,s) (((v)<<16)+(p<<8)+s)
-//mdk-stage1// #if (LINUX_VERSION_CODE < VERSION(2,1,126))
-//mdk-stage1// #define SCSI_DISK0_MAJOR SCSI_DISK_MAJOR
-//mdk-stage1// #endif
-
-static int xlate_scsi_name(bind_info_t *bind)
-{
- int i, fd, mode, minor;
- u_long arg[2], id1, id2;
-
- id1 = strtol(bind->name+3, NULL, 16);
- if ((bind->major == SCSI_DISK0_MAJOR) ||
- (bind->major == SCSI_CDROM_MAJOR))
- mode = S_IREAD|S_IFBLK;
- else
- mode = S_IREAD|S_IFCHR;
-
- for (i = 0; i < 16; i++) {
- minor = (bind->major == SCSI_DISK0_MAJOR) ? (i<<4) : i;
- fd = open_dev((bind->major<<8)+minor, mode);
- if (fd < 0)
- continue;
- if (ioctl(fd, SCSI_IOCTL_GET_IDLUN, arg) == 0) {
- id2 = (arg[0]&0x0f) + ((arg[0]>>4)&0xf0) +
- ((arg[0]>>8)&0xf00) + ((arg[0]>>12)&0xf000);
- if (id1 == id2) {
- close(fd);
- switch (bind->major) {
- case SCSI_DISK0_MAJOR:
- case SCSI_GENERIC_MAJOR:
- sprintf(bind->name+2, "%c", 'a'+i); break;
- case SCSI_CDROM_MAJOR:
- sprintf(bind->name, "scd%d", i); break;
- case SCSI_TAPE_MAJOR:
- sprintf(bind->name+2, "%d", i); break;
- }
- bind->minor = minor;
- return 0;
- }
- }
- close(fd);
- }
- return -1;
-}
-#endif
-
-/*====================================================================*/
-
-#define BEEP_TIME 150
-#define BEEP_OK 1000
-#define BEEP_WARN 2000
-#define BEEP_ERR 4000
-
-#ifdef __linux__
-
-//mdk-stage1// #include <sys/kd.h>
-//mdk-stage1//
-static void beep(unsigned int ms, unsigned int freq)
-{
-//mdk-stage1// int fd, arg;
-//mdk-stage1//
-//mdk-stage1// if (be_quiet)
-//mdk-stage1// return;
-//mdk-stage1// fd = open("/dev/console", O_RDWR);
-//mdk-stage1// if (fd < 0)
-//mdk-stage1// return;
-//mdk-stage1// arg = (ms << 16) | freq;
-//mdk-stage1// ioctl(fd, KDMKTONE, arg);
-//mdk-stage1// close(fd);
-//mdk-stage1// usleep(ms*1000);
-}
-
-#endif /* __linux__ */
-
-#ifdef __BEOS__
-static void beep(unsigned int ms, unsigned int freq)
-{
- if (!be_quiet) system("/bin/beep");
-}
-#endif
-
-/*====================================================================*/
-
-//mdk-stage1// static void write_pid(void)
-//mdk-stage1// {
-//mdk-stage1// FILE *f;
-//mdk-stage1// f = fopen(pidfile, "w");
-//mdk-stage1// if (f == NULL)
-//mdk-stage1// syslog(LOG_WARNING, "could not open %s: %m", pidfile);
-//mdk-stage1// else {
-//mdk-stage1// fprintf(f, "%d\n", getpid());
-//mdk-stage1// fclose(f);
-//mdk-stage1// }
-//mdk-stage1// }
-
-static void write_stab(void)
-{
- int i, j, k;
- FILE *f;
- socket_info_t *s;
- bind_info_t *bind;
-
- f = fopen(stabfile, "w");
- if (f == NULL) {
- log_message("CM: fopen(stabfile) failed: %m");
- return;
- }
-#ifndef __BEOS__
- if (flock(fileno(f), LOCK_EX) != 0) {
- log_message("CM: flock(stabfile) failed: %m");
- return;
- }
-#endif
- for (i = 0; i < sockets; i++) {
- s = &socket[i];
- fprintf(f, "Socket %d: ", i);
- if (!(s->state & SOCKET_PRESENT)) {
- fprintf(f, "empty\n");
-//mdk-stage1// } else if (s->state & SOCKET_HOTPLUG) {
-//mdk-stage1// fprintf(f, "CardBus hotplug device\n");
- } else if (!s->card) {
- fprintf(f, "unsupported card\n");
- } else {
- fprintf(f, "%s\n", s->card->name);
- for (j = 0; j < s->card->bindings; j++)
- for (k = 0, bind = s->bind[j];
- bind != NULL;
- k++, bind = bind->next) {
- char *class = s->card->device[j]->class;
- fprintf(f, "%d\t%s\t%s\t%d\t%s",
- i, (class ? class : "none"),
- bind->dev_info, k, bind->name);
- if (bind->major)
- fprintf(f, "\t%d\t%d\n",
- bind->major, bind->minor);
- else
- fputc('\n', f);
- }
- }
- }
- fflush(f);
-#ifndef __BEOS__
- flock(fileno(f), LOCK_UN);
-#endif
- fclose(f);
-}
-
-/*====================================================================*/
-
-static int get_tuple(int ns, cisdata_t code, ds_ioctl_arg_t *arg)
-{
- socket_info_t *s = &socket[ns];
-
- arg->tuple.DesiredTuple = code;
- arg->tuple.Attributes = 0;
- if (ioctl(s->fd, DS_GET_FIRST_TUPLE, arg) != 0)
- return -1;
- arg->tuple.TupleOffset = 0;
- if (ioctl(s->fd, DS_GET_TUPLE_DATA, arg) != 0) {
- log_message("CM: error reading CIS data on socket %d: %m", ns);
- return -1;
- }
- if (ioctl(s->fd, DS_PARSE_TUPLE, arg) != 0) {
- log_message("CM: error parsing CIS on socket %d: %m", ns);
- return -1;
- }
- return 0;
-}
-
-/*======================================================================
-
- Code to fetch a 2.4 kernel's hot plug PCI driver list
-
- This is distasteful but is the best I could come up with.
-
-======================================================================*/
-
-#ifdef __linux__
-
-typedef struct pci_id {
- u_short vendor, device;
- struct pci_id *next;
-} pci_id_t;
-
-static int get_pci_id(int ns, pci_id_t *id)
-{
- socket_info_t *s = &socket[ns];
- config_info_t config;
-
- config.Function = config.ConfigBase = 0;
- if ((ioctl(s->fd, DS_GET_CONFIGURATION_INFO, &config) != 0) ||
- (config.IntType != INT_CARDBUS) || !config.ConfigBase)
- return 0;
- id->vendor = config.ConfigBase & 0xffff;
- id->device = config.ConfigBase >> 16;
- return 1;
-}
-
-#endif /* __linux__ */
-
-/*====================================================================*/
-
-//mdk-stage1// static void log_card_info(cistpl_vers_1_t *vers,
-//mdk-stage1// cistpl_manfid_t *manfid,
-//mdk-stage1// cistpl_funcid_t *funcid,
-//mdk-stage1// pci_id_t *pci_id)
-//mdk-stage1// {
-//mdk-stage1// char v[256] = "";
-//mdk-stage1// int i;
-//mdk-stage1// static char *fn[] = {
-//mdk-stage1// "multi", "memory", "serial", "parallel", "fixed disk",
-//mdk-stage1// "video", "network", "AIMS", "SCSI"
-//mdk-stage1// };
-//mdk-stage1//
-//mdk-stage1// if (vers) {
-//mdk-stage1// for (i = 0; i < vers->ns; i++)
-//mdk-stage1// sprintf(v+strlen(v), "%s\"%s\"",
-//mdk-stage1// (i>0) ? ", " : "", vers->str+vers->ofs[i]);
-//mdk-stage1// syslog(LOG_INFO, " product info: %s", v);
-//mdk-stage1// } else {
-//mdk-stage1// syslog(LOG_INFO, " no product info available");
-//mdk-stage1// }
-//mdk-stage1// *v = '\0';
-//mdk-stage1// if (manfid->manf != 0)
-//mdk-stage1// sprintf(v, " manfid: 0x%04x, 0x%04x",
-//mdk-stage1// manfid->manf, manfid->card);
-//mdk-stage1// if (funcid->func != 0xff)
-//mdk-stage1// sprintf(v+strlen(v), " function: %d (%s)", funcid->func,
-//mdk-stage1// fn[funcid->func]);
-//mdk-stage1// if (strlen(v) > 0) syslog(LOG_INFO, "%s", v);
-//mdk-stage1// if (pci_id->vendor != 0)
-//mdk-stage1// syslog(LOG_INFO, " PCI id: 0x%04x, 0x%04x",
-//mdk-stage1// pci_id->vendor, pci_id->device);
-//mdk-stage1// }
-
-static card_info_t *lookup_card(int ns)
-{
- socket_info_t *s = &socket[ns];
- card_info_t *card = NULL;
- ds_ioctl_arg_t arg;
- cistpl_vers_1_t *vers = NULL;
- cistpl_manfid_t manfid = { 0, 0 };
- pci_id_t pci_id = { 0, 0 };
- cistpl_funcid_t funcid = { 0xff, 0xff };
- cs_status_t status;
- int i, ret, has_cis = 0;
-
- /* Do we have a CIS structure? */
- ret = ioctl(s->fd, DS_VALIDATE_CIS, &arg);
- has_cis = ((ret == 0) && (arg.cisinfo.Chains > 0));
-
- /* Try to read VERS_1, MANFID tuples */
- if (has_cis) {
- /* rule of thumb: cards with no FUNCID, but with common memory
- device geometry information, are probably memory cards */
- if (get_tuple(ns, CISTPL_FUNCID, &arg) == 0)
- memcpy(&funcid, &arg.tuple_parse.parse.funcid,
- sizeof(funcid));
- else if (get_tuple(ns, CISTPL_DEVICE_GEO, &arg) == 0)
- funcid.func = CISTPL_FUNCID_MEMORY;
- if (get_tuple(ns, CISTPL_MANFID, &arg) == 0)
- memcpy(&manfid, &arg.tuple_parse.parse.manfid,
- sizeof(manfid));
- if (get_tuple(ns, CISTPL_VERS_1, &arg) == 0)
- vers = &arg.tuple_parse.parse.version_1;
-
- for (card = root_card; card; card = card->next) {
-
- if (card->ident_type &
- ~(VERS_1_IDENT|MANFID_IDENT|TUPLE_IDENT))
- continue;
-
- if (card->ident_type & VERS_1_IDENT) {
- if (vers == NULL)
- continue;
- for (i = 0; i < card->id.vers.ns; i++) {
- if (strcmp(card->id.vers.pi[i], "*") == 0)
- continue;
- if (i >= vers->ns)
- break;
- if (strcmp(card->id.vers.pi[i],
- vers->str+vers->ofs[i]) != 0)
- break;
- }
- if (i < card->id.vers.ns)
- continue;
- }
-
- if (card->ident_type & MANFID_IDENT) {
- if ((manfid.manf != card->manfid.manf) ||
- (manfid.card != card->manfid.card))
- continue;
- }
-
- if (card->ident_type & TUPLE_IDENT) {
- arg.tuple.DesiredTuple = card->id.tuple.code;
- arg.tuple.Attributes = 0;
- ret = ioctl(s->fd, DS_GET_FIRST_TUPLE, &arg);
- if (ret != 0) continue;
- arg.tuple.TupleOffset = card->id.tuple.ofs;
- ret = ioctl(s->fd, DS_GET_TUPLE_DATA, &arg);
- if (ret != 0) continue;
- if (strncmp((char *)arg.tuple_parse.data,
- card->id.tuple.info,
- strlen(card->id.tuple.info)) != 0)
- continue;
- }
-
- break; /* we have a match */
- }
- }
-
- /* Check PCI vendor/device info */
- status.Function = 0;
- ioctl(s->fd, DS_GET_STATUS, &status);
- if (status.CardState & CS_EVENT_CB_DETECT) {
- if (get_pci_id(ns, &pci_id)) {
- if (!card) {
- for (card = root_card; card; card = card->next)
- if ((card->ident_type == PCI_IDENT) &&
- (pci_id.vendor == card->manfid.manf) &&
- (pci_id.device == card->manfid.card))
- break;
- }
- } else {
- /* this is a 2.4 kernel; hotplug handles these cards */
-//mdk-stage1// s->state |= SOCKET_HOTPLUG;
- log_message("CM: socket %d: CardBus hotplug device", ns);
- //beep(BEEP_TIME, BEEP_OK);
-//mdk-stage1// return NULL;
- }
- }
-
- /* Try for a FUNCID match */
- if (!card && (funcid.func != 0xff)) {
- for (card = root_func; card; card = card->next)
- if (card->id.func.funcid == funcid.func)
- break;
- }
-
- if (card) {
- log_message("CM: socket %d: %s", ns, card->name);
- beep(BEEP_TIME, BEEP_OK);
-//mdk-stage1// if (verbose) log_card_info(vers, &manfid, &funcid, &pci_id);
- return card;
- }
-
- if (!blank_card || (status.CardState & CS_EVENT_CB_DETECT) ||
- manfid.manf || manfid.card || pci_id.vendor || vers) {
- log_message("CM: unsupported card in socket %d", ns);
-//mdk-stage1// if (one_pass) return NULL;
- beep(BEEP_TIME, BEEP_ERR);
-//mdk-stage1// log_card_info(vers, &manfid, &funcid, &pci_id);
- return NULL;
- } else {
- card = blank_card;
- log_message("CM: socket %d: %s", ns, card->name);
- beep(BEEP_TIME, BEEP_WARN);
- return card;
- }
-}
-
-/*====================================================================*/
-
-static int load_config(void)
-{
- if (chdir(configpath) != 0) {
- log_message("CM: chdir to %s failed: %m", configpath);
- return -1;
- }
- if (parse_configfile("config") != 0) {
- log_message("CM: parsing of config file failed: %m");
- return -1;
- }
- if (root_device == NULL)
- log_message("CM: no device drivers defined");
- if ((root_card == NULL) && (root_func == NULL))
- log_message("CM: no cards defined");
- return 0;
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// static void free_card(card_info_t *card)
-//mdk-stage1// {
-//mdk-stage1// if (card && (--card->refs == 0)) {
-//mdk-stage1// int i;
-//mdk-stage1// free(card->name);
-//mdk-stage1// switch(card->ident_type) {
-//mdk-stage1// case VERS_1_IDENT:
-//mdk-stage1// for (i = 0; i < card->id.vers.ns; i++)
-//mdk-stage1// free(card->id.vers.pi[i]);
-//mdk-stage1// break;
-//mdk-stage1// case TUPLE_IDENT:
-//mdk-stage1// free(card->id.tuple.info);
-//mdk-stage1// break;
-//mdk-stage1// default:
-//mdk-stage1// break;
-//mdk-stage1// }
-//mdk-stage1// free(card);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// static void free_device(device_info_t *dev)
-//mdk-stage1// {
-//mdk-stage1// if (dev && (--dev->refs == 0)) {
-//mdk-stage1// int i;
-//mdk-stage1// for (i = 0; i < dev->modules; i++) {
-//mdk-stage1// free(dev->module[i]);
-//mdk-stage1// if (dev->opts[i]) free(dev->opts[i]);
-//mdk-stage1// }
-//mdk-stage1// if (dev->class) free(dev->class);
-//mdk-stage1// free(dev);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// static void free_mtd(mtd_ident_t *mtd)
-//mdk-stage1// {
-//mdk-stage1// if (mtd && (--mtd->refs == 0)) {
-//mdk-stage1// free(mtd->name);
-//mdk-stage1// free(mtd->module);
-//mdk-stage1// free(mtd);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// static void free_config(void)
-//mdk-stage1// {
-//mdk-stage1// while (root_adjust != NULL) {
-//mdk-stage1// adjust_list_t *adj = root_adjust;
-//mdk-stage1// root_adjust = root_adjust->next;
-//mdk-stage1// free(adj);
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// while (root_device != NULL) {
-//mdk-stage1// device_info_t *dev = root_device;
-//mdk-stage1// root_device = root_device->next;
-//mdk-stage1// free_device(dev);
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// while (root_card != NULL) {
-//mdk-stage1// card_info_t *card = root_card;
-//mdk-stage1// root_card = root_card->next;
-//mdk-stage1// free_card(card);
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// while (root_func != NULL) {
-//mdk-stage1// card_info_t *card = root_func;
-//mdk-stage1// root_func = root_func->next;
-//mdk-stage1// free_card(card);
-//mdk-stage1// }
-//mdk-stage1// blank_card = NULL;
-//mdk-stage1//
-//mdk-stage1// while (root_mtd != NULL) {
-//mdk-stage1// mtd_ident_t *mtd = root_mtd;
-//mdk-stage1// root_mtd = root_mtd->next;
-//mdk-stage1// free_mtd(mtd);
-//mdk-stage1// }
-//mdk-stage1// default_mtd = NULL;
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// static int execute(char *msg, char *cmd)
-//mdk-stage1// {
-//mdk-stage1// int ret;
-//mdk-stage1// FILE *f;
-//mdk-stage1// char line[256];
-//mdk-stage1//
-//mdk-stage1// syslog(LOG_INFO, "executing: '%s'", cmd);
-//mdk-stage1// strcat(cmd, " 2>&1");
-//mdk-stage1// f = popen(cmd, "r");
-//mdk-stage1// while (fgets(line, 255, f)) {
-//mdk-stage1// line[strlen(line)-1] = '\0';
-//mdk-stage1// syslog(LOG_INFO, "+ %s", line);
-//mdk-stage1// }
-//mdk-stage1// ret = pclose(f);
-//mdk-stage1// if (WIFEXITED(ret)) {
-//mdk-stage1// if (WEXITSTATUS(ret))
-//mdk-stage1// syslog(LOG_INFO, "%s exited with status %d",
-//mdk-stage1// msg, WEXITSTATUS(ret));
-//mdk-stage1// return WEXITSTATUS(ret);
-//mdk-stage1// } else
-//mdk-stage1// syslog(LOG_INFO, "%s exited on signal %d",
-//mdk-stage1// msg, WTERMSIG(ret));
-//mdk-stage1// return -1;
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// static int execute_on_dev(char *action, char *class, char *dev)
-//mdk-stage1// {
-//mdk-stage1// /* Fixed length strings are ok here */
-//mdk-stage1// char msg[128], cmd[128];
-//mdk-stage1//
-//mdk-stage1// sprintf(msg, "%s cmd", action);
-//mdk-stage1// sprintf(cmd, "./%s %s %s", class, action, dev);
-//mdk-stage1// return execute(msg, cmd);
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// static int execute_on_all(char *cmd, char *class, int sn, int fn)
-//mdk-stage1// {
-//mdk-stage1// socket_info_t *s = &socket[sn];
-//mdk-stage1// bind_info_t *bind;
-//mdk-stage1// int ret = 0;
-//mdk-stage1// for (bind = s->bind[fn]; bind != NULL; bind = bind->next)
-//mdk-stage1// if (bind->name[0] && (bind->name[2] != '#'))
-//mdk-stage1// ret |= execute_on_dev(cmd, class, bind->name);
-//mdk-stage1// return ret;
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1//
-//mdk-stage1// typedef struct module_list_t {
-//mdk-stage1// char *mod;
-//mdk-stage1// int usage;
-//mdk-stage1// struct module_list_t *next;
-//mdk-stage1// } module_list_t;
-//mdk-stage1//
-//mdk-stage1// static module_list_t *module_list = NULL;
-//mdk-stage1//
-//mdk-stage1// static int try_insmod(char *mod, char *opts)
-//mdk-stage1// {
-//mdk-stage1// char *cmd = malloc(strlen(mod) + strlen(modpath) +
-//mdk-stage1// (opts ? strlen(opts) : 0) + 30);
-//mdk-stage1// int ret;
-//mdk-stage1//
-//mdk-stage1// strcpy(cmd, "insmod ");
-//mdk-stage1// if (strchr(mod, '/') != NULL)
-//mdk-stage1// sprintf(cmd+7, "%s/%s.o", modpath, mod);
-//mdk-stage1// else
-//mdk-stage1// sprintf(cmd+7, "%s/pcmcia/%s.o", modpath, mod);
-//mdk-stage1// if (access(cmd+7, R_OK) != 0) {
-//mdk-stage1// syslog(LOG_INFO, "module %s not available", cmd+7);
-//mdk-stage1// free(cmd);
-//mdk-stage1// return -1;
-//mdk-stage1// }
-//mdk-stage1// if (opts) {
-//mdk-stage1// strcat(cmd, " ");
-//mdk-stage1// strcat(cmd, opts);
-//mdk-stage1// }
-//mdk-stage1// ret = execute("insmod", cmd);
-//mdk-stage1// free(cmd);
-//mdk-stage1// return ret;
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// static int try_modprobe(char *mod, char *opts)
-//mdk-stage1// {
-//mdk-stage1// char *cmd = malloc(strlen(mod) + (opts ? strlen(opts) : 0) + 20);
-//mdk-stage1// char *s = strrchr(mod, '/');
-//mdk-stage1// int ret;
-//mdk-stage1//
-//mdk-stage1// sprintf(cmd, "modprobe %s", (s) ? s+1 : mod);
-//mdk-stage1// if (opts) {
-//mdk-stage1// strcat(cmd, " ");
-//mdk-stage1// strcat(cmd, opts);
-//mdk-stage1// }
-//mdk-stage1// ret = execute("modprobe", cmd);
-//mdk-stage1// free(cmd);
-//mdk-stage1// return ret;
-//mdk-stage1// }
-
-static void install_module(char *mod, char *opts)
-{
- my_insmod(mod, ANY_DRIVER_TYPE, opts);
-//mdk-stage1// module_list_t *ml;
-//mdk-stage1//
-//mdk-stage1// for (ml = module_list; ml != NULL; ml = ml->next)
-//mdk-stage1// if (strcmp(mod, ml->mod) == 0) break;
-//mdk-stage1// if (ml == NULL) {
-//mdk-stage1// ml = (module_list_t *)malloc(sizeof(struct module_list_t));
-//mdk-stage1// ml->mod = mod;
-//mdk-stage1// ml->usage = 0;
-//mdk-stage1// ml->next = module_list;
-//mdk-stage1// module_list = ml;
-//mdk-stage1// }
-//mdk-stage1// ml->usage++;
-//mdk-stage1// if (ml->usage != 1)
-//mdk-stage1// return;
-//mdk-stage1//
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1// if (access("/proc/bus/pccard/drivers", R_OK) == 0) {
-//mdk-stage1// FILE *f = fopen("/proc/bus/pccard/drivers", "r");
-//mdk-stage1// if (f) {
-//mdk-stage1// char a[61], s[33];
-//mdk-stage1// while (fgets(a, 60, f)) {
-//mdk-stage1// int is_kernel;
-//mdk-stage1// sscanf(a, "%s %d", s, &is_kernel);
-//mdk-stage1// if (strcmp(s, mod) != 0) continue;
-//mdk-stage1// /* If it isn't a module, we won't try to rmmod */
-//mdk-stage1// ml->usage += is_kernel;
-//mdk-stage1// fclose(f);
-//mdk-stage1// return;
-//mdk-stage1// }
-//mdk-stage1// fclose(f);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// #endif
-//mdk-stage1//
-//mdk-stage1// if (do_modprobe) {
-//mdk-stage1// if (try_modprobe(mod, opts) != 0)
-//mdk-stage1// try_insmod(mod, opts);
-//mdk-stage1// } else {
-//mdk-stage1// if (try_insmod(mod, opts) != 0)
-//mdk-stage1// try_modprobe(mod, opts);
-//mdk-stage1// }
-}
-
-//mdk-stage1// static void remove_module(char *mod)
-//mdk-stage1// {
-//mdk-stage1// char *s, cmd[128];
-//mdk-stage1// module_list_t *ml;
-//mdk-stage1//
-//mdk-stage1// for (ml = module_list; ml != NULL; ml = ml->next)
-//mdk-stage1// if (strcmp(mod, ml->mod) == 0) break;
-//mdk-stage1// if (ml != NULL) {
-//mdk-stage1// ml->usage--;
-//mdk-stage1// if (ml->usage == 0) {
-//mdk-stage1// /* Strip off leading path names */
-//mdk-stage1// s = strrchr(mod, '/');
-//mdk-stage1// s = (s) ? s+1 : mod;
-//mdk-stage1// sprintf(cmd, do_modprobe ? "modprobe -r %s" : "rmmod %s", s);
-//mdk-stage1// execute(do_modprobe ? "modprobe" : "rmmod", cmd);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// #endif /* __linux__ */
-//mdk-stage1//
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// #ifdef __BEOS__
-//mdk-stage1//
-//mdk-stage1// #define install_module(a,b)
-//mdk-stage1// #define remove_module(a)
-//mdk-stage1//
-//mdk-stage1// static void republish_driver(char *mod)
-//mdk-stage1// {
-//mdk-stage1// int fd = open("/dev", O_RDWR);
-//mdk-stage1// write(fd, mod, strlen(mod));
-//mdk-stage1// close(fd);
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// #endif /* __BEOS__ */
-//mdk-stage1//
-//mdk-stage1// /*====================================================================*/
-
-static mtd_ident_t *lookup_mtd(region_info_t *region)
-{
- mtd_ident_t *mtd;
- int match = 0;
-
- for (mtd = root_mtd; mtd; mtd = mtd->next) {
- switch (mtd->mtd_type) {
- case JEDEC_MTD:
- if ((mtd->jedec_mfr == region->JedecMfr) &&
- (mtd->jedec_info == region->JedecInfo)) {
- match = 1;
- break;
- }
- case DTYPE_MTD:
- break;
- default:
- break;
- }
- if (match) break;
- }
- if (mtd)
- return mtd;
- else
- return default_mtd;
-}
-
-/*====================================================================*/
-
-static void bind_mtd(int sn)
-{
- socket_info_t *s = &socket[sn];
- region_info_t region;
- bind_info_t bind;
- mtd_info_t mtd_info;
- mtd_ident_t *mtd;
- int i, attr, ret, nr;
-
- nr = 0;
- for (attr = 0; attr < 2; attr++) {
- region.Attributes = attr;
- ret = ioctl(s->fd, DS_GET_FIRST_REGION, &region);
- while (ret == 0) {
- mtd = lookup_mtd(&region);
- if (mtd) {
- /* Have we seen this MTD before? */
- for (i = 0; i < nr; i++)
- if (s->mtd[i] == mtd) break;
- if (i == nr) {
- install_module(mtd->module, mtd->opts);
- s->mtd[nr] = mtd;
- mtd->refs++;
- nr++;
- }
- log_message("CM: %s memory region at 0x%x: %s",
- attr ? "Attribute" : "Common", region.CardOffset,
- mtd->name);
- /* Bind MTD to this region */
- strcpy(mtd_info.dev_info, s->mtd[i]->module);
- mtd_info.Attributes = region.Attributes;
- mtd_info.CardOffset = region.CardOffset;
- if (ioctl(s->fd, DS_BIND_MTD, &mtd_info) != 0) {
- log_message("CM: bind MTD '%s' to region at 0x%x failed: %m",
- (char *)mtd_info.dev_info, region.CardOffset);
- }
- }
- ret = ioctl(s->fd, DS_GET_NEXT_REGION, &region);
- }
- }
- s->mtd[nr] = NULL;
-
- /* Now bind each unique MTD as a normal client of this socket */
- for (i = 0; i < nr; i++) {
- strcpy(bind.dev_info, s->mtd[i]->module);
- bind.function = 0;
- if (ioctl(s->fd, DS_BIND_REQUEST, &bind) != 0)
- log_message("CM: bind MTD '%s' to socket %d failed: %m",
- (char *)bind.dev_info, sn);
- }
-}
-
-/*====================================================================*/
-
-static void update_cis(socket_info_t *s)
-{
- cisdump_t cis;
- FILE *f = fopen(s->card->cis_file, "r");
- if (f == NULL)
- log_message("CM: could not open '%s': %m", s->card->cis_file);
- else {
- cis.Length = fread(cis.Data, 1, CISTPL_MAX_CIS_SIZE, f);
- fclose(f);
- if (ioctl(s->fd, DS_REPLACE_CIS, &cis) != 0)
- log_message("CM: could not replace CIS: %m");
- }
-}
-
-/*====================================================================*/
-
-static void do_insert(int sn)
-{
- socket_info_t *s = &socket[sn];
- card_info_t *card;
- device_info_t **dev;
- bind_info_t *bind, **tail;
- int i, j, ret;
-
- /* Already identified? */
- if ((s->card != NULL) && (s->card != blank_card))
- return;
-
- log_message("CM: initializing socket %d", sn);
- card = lookup_card(sn);
- if (s->state & SOCKET_HOTPLUG) {
- write_stab();
- return;
- }
- /* Make sure we've learned something new before continuing */
- if (card == s->card)
- return;
- s->card = card;
- card->refs++;
- if (card->cis_file) update_cis(s);
-
- dev = card->device;
-
- /* Set up MTD's */
- for (i = 0; i < card->bindings; i++)
- if (dev[i]->needs_mtd)
- break;
- if (i < card->bindings)
- bind_mtd(sn);
-
-#ifdef __linux__
- /* Install kernel modules */
- for (i = 0; i < card->bindings; i++) {
- dev[i]->refs++;
- for (j = 0; j < dev[i]->modules; j++)
- install_module(dev[i]->module[j], dev[i]->opts[j]);
- }
-#endif
-
- /* Bind drivers by their dev_info identifiers */
- for (i = 0; i < card->bindings; i++) {
- bind = calloc(1, sizeof(bind_info_t));
- strcpy((char *)bind->dev_info, (char *)dev[i]->dev_info);
- if (strcmp(bind->dev_info, "cb_enabler") == 0)
- bind->function = BIND_FN_ALL;
- else
- bind->function = card->dev_fn[i];
- if (ioctl(s->fd, DS_BIND_REQUEST, bind) != 0) {
- if (errno == EBUSY) {
- log_message("CM: '%s' already bound to socket %d",
- (char *)bind->dev_info, sn);
- } else {
- log_message("CM: bind '%s' to socket %d failed: %m",
- (char *)bind->dev_info, sn);
- beep(BEEP_TIME, BEEP_ERR);
- write_stab();
- return;
- }
- }
-
-#ifdef __BEOS__
- republish_driver(dev[i]->module[0]);
-#endif
-
- for (ret = j = 0; j < 10; j++) {
- ret = ioctl(s->fd, DS_GET_DEVICE_INFO, bind);
- if ((ret == 0) || (errno != EAGAIN))
- break;
- usleep(100000);
- }
- if (ret != 0) {
- log_message("CM: get dev info on socket %d failed: %m",
- sn);
- ioctl(s->fd, DS_UNBIND_REQUEST, bind);
- beep(BEEP_TIME, BEEP_ERR);
- write_stab();
- return;
- }
- tail = &s->bind[i];
- while (ret == 0) {
- bind_info_t *old;
-#ifdef __linux__
- if ((strlen(bind->name) > 3) && (bind->name[2] == '#'))
- xlate_scsi_name(bind);
-#endif
- old = *tail = bind; tail = (bind_info_t **)&bind->next;
- bind = (bind_info_t *)malloc(sizeof(bind_info_t));
- memcpy(bind, old, sizeof(bind_info_t));
- ret = ioctl(s->fd, DS_GET_NEXT_DEVICE, bind);
- }
- *tail = NULL; free(bind);
- write_stab();
- }
-
-//mdk-stage1// /* Run "start" commands */
-//mdk-stage1// for (i = ret = 0; i < card->bindings; i++)
-//mdk-stage1// if (dev[i]->class)
-//mdk-stage1// ret |= execute_on_all("start", dev[i]->class, sn, i);
-//mdk-stage1// beep(BEEP_TIME, (ret) ? BEEP_ERR : BEEP_OK);
-
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// static int do_check(int sn)
-//mdk-stage1// {
-//mdk-stage1// socket_info_t *s = &socket[sn];
-//mdk-stage1// card_info_t *card;
-//mdk-stage1// device_info_t **dev;
-//mdk-stage1// int i, ret;
-//mdk-stage1//
-//mdk-stage1// card = s->card;
-//mdk-stage1// if (card == NULL)
-//mdk-stage1// return 0;
-//mdk-stage1//
-//mdk-stage1// /* Run "check" commands */
-//mdk-stage1// dev = card->device;
-//mdk-stage1// for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// if (dev[i]->class) {
-//mdk-stage1// ret = execute_on_all("check", dev[i]->class, sn, i);
-//mdk-stage1// if (ret != 0)
-//mdk-stage1// return CS_IN_USE;
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// return 0;
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// static void do_remove(int sn)
-//mdk-stage1// {
-//mdk-stage1// socket_info_t *s = &socket[sn];
-//mdk-stage1// card_info_t *card;
-//mdk-stage1// device_info_t **dev;
-//mdk-stage1// bind_info_t *bind;
-//mdk-stage1// int i, j;
-//mdk-stage1//
-//mdk-stage1// if (verbose) syslog(LOG_INFO, "shutting down socket %d", sn);
-//mdk-stage1//
-//mdk-stage1// card = s->card;
-//mdk-stage1// if (card == NULL)
-//mdk-stage1// goto done;
-//mdk-stage1//
-//mdk-stage1// /* Run "stop" commands */
-//mdk-stage1// dev = card->device;
-//mdk-stage1// for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// if (dev[i]->class) {
-//mdk-stage1// execute_on_all("stop", dev[i]->class, sn, i);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// /* unbind driver instances */
-//mdk-stage1// for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// if (s->bind[i]) {
-//mdk-stage1// if (ioctl(s->fd, DS_UNBIND_REQUEST, s->bind[i]) != 0)
-//mdk-stage1// syslog(LOG_INFO, "unbind '%s' from socket %d failed: %m",
-//mdk-stage1// (char *)s->bind[i]->dev_info, sn);
-//mdk-stage1// while (s->bind[i]) {
-//mdk-stage1// bind = s->bind[i];
-//mdk-stage1// s->bind[i] = bind->next;
-//mdk-stage1// free(bind);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// for (i = 0; (s->mtd[i] != NULL); i++) {
-//mdk-stage1// bind_info_t b;
-//mdk-stage1// strcpy(b.dev_info, s->mtd[i]->module);
-//mdk-stage1// b.function = 0;
-//mdk-stage1// if (ioctl(s->fd, DS_UNBIND_REQUEST, &b) != 0)
-//mdk-stage1// syslog(LOG_INFO, "unbind MTD '%s' from socket %d failed: %m",
-//mdk-stage1// s->mtd[i]->module, sn);
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// /* remove kernel modules in inverse order */
-//mdk-stage1// for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// for (j = dev[i]->modules-1; j >= 0; j--)
-//mdk-stage1// remove_module(dev[i]->module[j]);
-//mdk-stage1// free_device(dev[i]);
-//mdk-stage1// }
-//mdk-stage1// /* Remove any MTD's bound to this socket */
-//mdk-stage1// for (i = 0; (s->mtd[i] != NULL); i++) {
-//mdk-stage1// remove_module(s->mtd[i]->module);
-//mdk-stage1// free_mtd(s->mtd[i]);
-//mdk-stage1// s->mtd[i] = NULL;
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// done:
-//mdk-stage1// beep(BEEP_TIME, BEEP_OK);
-//mdk-stage1// free_card(card);
-//mdk-stage1// s->card = NULL;
-//mdk-stage1// write_stab();
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// static void do_suspend(int sn)
-//mdk-stage1// {
-//mdk-stage1// socket_info_t *s = &socket[sn];
-//mdk-stage1// card_info_t *card;
-//mdk-stage1// device_info_t **dev;
-//mdk-stage1// int i, ret;
-//mdk-stage1//
-//mdk-stage1// card = s->card;
-//mdk-stage1// if (card == NULL)
-//mdk-stage1// return;
-//mdk-stage1// dev = card->device;
-//mdk-stage1// for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// if (dev[i]->class) {
-//mdk-stage1// ret = execute_on_all("suspend", dev[i]->class, sn, i);
-//mdk-stage1// if (ret != 0)
-//mdk-stage1// beep(BEEP_TIME, BEEP_ERR);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// static void do_resume(int sn)
-//mdk-stage1// {
-//mdk-stage1// socket_info_t *s = &socket[sn];
-//mdk-stage1// card_info_t *card;
-//mdk-stage1// device_info_t **dev;
-//mdk-stage1// int i, ret;
-//mdk-stage1//
-//mdk-stage1// card = s->card;
-//mdk-stage1// if (card == NULL)
-//mdk-stage1// return;
-//mdk-stage1// dev = card->device;
-//mdk-stage1// for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// if (dev[i]->class) {
-//mdk-stage1// ret = execute_on_all("resume", dev[i]->class, sn, i);
-//mdk-stage1// if (ret != 0)
-//mdk-stage1// beep(BEEP_TIME, BEEP_ERR);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// }
-
-/*====================================================================*/
-
-static void wait_for_pending(void)
-{
- cs_status_t status;
- int i;
- status.Function = 0;
- for (;;) {
- usleep(100000);
- for (i = 0; i < sockets; i++)
- if ((ioctl(socket[i].fd, DS_GET_STATUS, &status) == 0) &&
- (status.CardState & CS_EVENT_CARD_INSERTION))
- break;
- if (i == sockets) break;
- }
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// static void free_resources(void)
-//mdk-stage1// {
-//mdk-stage1// adjust_list_t *al;
-//mdk-stage1// int fd = socket[0].fd;
-//mdk-stage1//
-//mdk-stage1// for (al = root_adjust; al; al = al->next) {
-//mdk-stage1// if (al->adj.Action == ADD_MANAGED_RESOURCE) {
-//mdk-stage1// al->adj.Action = REMOVE_MANAGED_RESOURCE;
-//mdk-stage1// ioctl(fd, DS_ADJUST_RESOURCE_INFO, &al->adj);
-//mdk-stage1// } else if ((al->adj.Action == REMOVE_MANAGED_RESOURCE) &&
-//mdk-stage1// (al->adj.Resource == RES_IRQ)) {
-//mdk-stage1// al->adj.Action = ADD_MANAGED_RESOURCE;
-//mdk-stage1// ioctl(fd, DS_ADJUST_RESOURCE_INFO, &al->adj);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// }
-
-/*====================================================================*/
-
-static void adjust_resources(void)
-{
- adjust_list_t *al;
- int ret;
- char tmp[64];
- int fd = socket[0].fd;
-
- for (al = root_adjust; al; al = al->next) {
- ret = ioctl(fd, DS_ADJUST_RESOURCE_INFO, &al->adj);
- if (ret != 0) {
- switch (al->adj.Resource) {
- case RES_MEMORY_RANGE:
- sprintf(tmp, "memory %#lx-%#lx",
- al->adj.resource.memory.Base,
- al->adj.resource.memory.Base +
- al->adj.resource.memory.Size - 1);
- break;
- case RES_IO_RANGE:
- sprintf(tmp, "IO ports %#x-%#x",
- al->adj.resource.io.BasePort,
- al->adj.resource.io.BasePort +
- al->adj.resource.io.NumPorts - 1);
- break;
- case RES_IRQ:
- sprintf(tmp, "irq %u", al->adj.resource.irq.IRQ);
- break;
- }
- log_message("CM: could not adjust resource: %s: %m", tmp);
- }
- }
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// static int cleanup_files = 0;
-//mdk-stage1//
-//mdk-stage1// static void fork_now(void)
-//mdk-stage1// {
-//mdk-stage1// int ret;
-//mdk-stage1// if ((ret = fork()) > 0) {
-//mdk-stage1// cleanup_files = 0;
-//mdk-stage1// exit(0);
-//mdk-stage1// }
-//mdk-stage1// if (ret == -1)
-//mdk-stage1// syslog(LOG_ERR, "forking: %m");
-//mdk-stage1// if (setsid() < 0)
-//mdk-stage1// syslog(LOG_ERR, "detaching from tty: %m");
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// static void done(void)
-//mdk-stage1// {
-//mdk-stage1// syslog(LOG_INFO, "exiting");
-//mdk-stage1// if (cleanup_files) {
-//mdk-stage1// unlink(pidfile);
-//mdk-stage1// unlink(stabfile);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// /* most recent signal */
-//mdk-stage1// static int caught_signal = 0;
-//mdk-stage1//
-//mdk-stage1// static void catch_signal(int sig)
-//mdk-stage1// {
-//mdk-stage1// caught_signal = sig;
-//mdk-stage1// if (signal(sig, catch_signal) == SIG_ERR)
-//mdk-stage1// syslog(LOG_INFO, "signal(%d): %m", sig);
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// static void handle_signal(void)
-//mdk-stage1// {
-//mdk-stage1// int i;
-//mdk-stage1// switch (caught_signal) {
-//mdk-stage1// case SIGTERM:
-//mdk-stage1// case SIGINT:
-//mdk-stage1// for (i = 0; i < sockets; i++)
-//mdk-stage1// if ((socket[i].state & SOCKET_PRESENT) &&
-//mdk-stage1// (do_check(i) == 0)) do_remove(i);
-//mdk-stage1// free_resources();
-//mdk-stage1// exit(0);
-//mdk-stage1// break;
-//mdk-stage1// case SIGHUP:
-//mdk-stage1// free_resources();
-//mdk-stage1// free_config();
-//mdk-stage1// syslog(LOG_INFO, "re-loading config file");
-//mdk-stage1// load_config();
-//mdk-stage1// adjust_resources();
-//mdk-stage1// break;
-//mdk-stage1// #ifdef SIGPWR
-//mdk-stage1// case SIGPWR:
-//mdk-stage1// break;
-//mdk-stage1// #endif
-//mdk-stage1// }
-//mdk-stage1// }
-
-/*====================================================================*/
-
-static int init_sockets(void)
-{
- int fd, i;
- servinfo_t serv;
-
-#ifdef __linux__
- major = lookup_dev("pcmcia");
- if (major < 0) {
- if (major == -ENODEV)
- log_message("CM: no pcmcia driver in /proc/devices");
- else
- log_message("CM: could not open /proc/devices: %m");
- return -1;
- }
-#endif
- for (fd = -1, i = 0; i < MAX_SOCKS; i++) {
- fd = open_sock(i, S_IFCHR|S_IREAD|S_IWRITE);
- if (fd < 0) break;
- socket[i].fd = fd;
- socket[i].state = 0;
- }
- if ((fd < 0) && (errno != ENODEV) && (errno != ENOENT))
- log_message("CM: open_sock(socket %d) failed: %m", i);
- sockets = i;
- if (sockets == 0) {
- log_message("CM: no sockets found!");
- return -1;
- } else
- log_message("CM: watching %d sockets", sockets);
-
- if (ioctl(socket[0].fd, DS_GET_CARD_SERVICES_INFO, &serv) == 0) {
- if (serv.Revision != CS_RELEASE_CODE)
- log_message("CM: warning, Card Services release does not match kernel (generally harmless)");
- } else {
- log_message("CM: could not get CS revision info!");
- return -1;
- }
- adjust_resources();
- return 0;
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// int main(int argc, char *argv[])
-//mdk-stage1// {
-//mdk-stage1// int optch, errflg;
-//mdk-stage1// int i, max_fd, ret, event, pass;
-//mdk-stage1// int delay_fork = 0;
-//mdk-stage1// struct timeval tv;
-//mdk-stage1// fd_set fds;
-//mdk-stage1//
-//mdk-stage1// if (access("/var/lib/pcmcia", R_OK) == 0) {
-//mdk-stage1// stabfile = "/var/lib/pcmcia/stab";
-//mdk-stage1// } else {
-//mdk-stage1// stabfile = "/var/run/stab";
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// errflg = 0;
-//mdk-stage1// while ((optch = getopt(argc, argv, "Vqdvofc:m:p:s:")) != -1) {
-//mdk-stage1// switch (optch) {
-//mdk-stage1// case 'V':
-//mdk-stage1// fprintf(stderr, "cardmgr version " CS_RELEASE "\n");
-//mdk-stage1// return 0;
-//mdk-stage1// break;
-//mdk-stage1// case 'q':
-//mdk-stage1// be_quiet = 1; break;
-//mdk-stage1// case 'v':
-//mdk-stage1// verbose = 1; break;
-//mdk-stage1// case 'o':
-//mdk-stage1// one_pass = 1; break;
-//mdk-stage1// case 'f':
-//mdk-stage1// delay_fork = 1; break;
-//mdk-stage1// case 'c':
-//mdk-stage1// configpath = strdup(optarg); break;
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1// case 'd':
-//mdk-stage1// do_modprobe = 1; break;
-//mdk-stage1// case 'm':
-//mdk-stage1// modpath = strdup(optarg); break;
-//mdk-stage1// #endif
-//mdk-stage1// case 'p':
-//mdk-stage1// pidfile = strdup(optarg); break;
-//mdk-stage1// case 's':
-//mdk-stage1// stabfile = strdup(optarg); break;
-//mdk-stage1// default:
-//mdk-stage1// errflg = 1; break;
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// if (errflg || (optind < argc)) {
-//mdk-stage1// fprintf(stderr, "usage: %s [-V] [-q] [-v] [-d] [-o] [-f] "
-//mdk-stage1// "[-c configpath] [-m modpath]\n "
-//mdk-stage1// "[-p pidfile] [-s stabfile]\n", argv[0]);
-//mdk-stage1// exit(EXIT_FAILURE);
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// #ifdef DEBUG
-//mdk-stage1// openlog("cardmgr", LOG_PID|LOG_PERROR, LOG_DAEMON);
-//mdk-stage1// #else
-//mdk-stage1// openlog("cardmgr", LOG_PID|LOG_CONS, LOG_DAEMON);
-//mdk-stage1// close(0); close(1); close(2);
-//mdk-stage1// if (!delay_fork && !one_pass)
-//mdk-stage1// fork_now();
-//mdk-stage1// #endif
-//mdk-stage1//
-//mdk-stage1// syslog(LOG_INFO, "starting, version is " CS_RELEASE);
-//mdk-stage1// atexit(&done);
-//mdk-stage1// putenv("PATH=/bin:/sbin:/usr/bin:/usr/sbin");
-//mdk-stage1// if (verbose)
-//mdk-stage1// putenv("VERBOSE=1");
-//mdk-stage1//
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1// if (modpath == NULL) {
-//mdk-stage1// if (access("/lib/modules/preferred", X_OK) == 0)
-//mdk-stage1// modpath = "/lib/modules/preferred";
-//mdk-stage1// else {
-//mdk-stage1// struct utsname utsname;
-//mdk-stage1// if (uname(&utsname) != 0) {
-//mdk-stage1// syslog(LOG_ERR, "uname(): %m");
-//mdk-stage1// exit(EXIT_FAILURE);
-//mdk-stage1// }
-//mdk-stage1// modpath = (char *)malloc(strlen(utsname.release)+14);
-//mdk-stage1// sprintf(modpath, "/lib/modules/%s", utsname.release);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// if (access(modpath, X_OK) != 0)
-//mdk-stage1// syslog(LOG_INFO, "cannot access %s: %m", modpath);
-//mdk-stage1// /* We default to using modprobe if it is available */
-//mdk-stage1// do_modprobe |= (access("/sbin/modprobe", X_OK) == 0);
-//mdk-stage1// #endif /* __linux__ */
-//mdk-stage1//
-//mdk-stage1// load_config();
-//mdk-stage1//
-//mdk-stage1// if (init_sockets() != 0)
-//mdk-stage1// exit(EXIT_FAILURE);
-//mdk-stage1//
-//mdk-stage1// /* If we've gotten this far, then clean up pid and stab at exit */
-//mdk-stage1// write_pid();
-//mdk-stage1// write_stab();
-//mdk-stage1// cleanup_files = 1;
-//mdk-stage1//
-//mdk-stage1// if (signal(SIGHUP, catch_signal) == SIG_ERR)
-//mdk-stage1// syslog(LOG_ERR, "signal(SIGHUP): %m");
-//mdk-stage1// if (signal(SIGTERM, catch_signal) == SIG_ERR)
-//mdk-stage1// syslog(LOG_ERR, "signal(SIGTERM): %m");
-//mdk-stage1// if (signal(SIGINT, catch_signal) == SIG_ERR)
-//mdk-stage1// syslog(LOG_ERR, "signal(SIGINT): %m");
-//mdk-stage1// #ifdef SIGPWR
-//mdk-stage1// if (signal(SIGPWR, catch_signal) == SIG_ERR)
-//mdk-stage1// syslog(LOG_ERR, "signal(SIGPWR): %m");
-//mdk-stage1// #endif
-//mdk-stage1//
-//mdk-stage1// for (i = max_fd = 0; i < sockets; i++)
-//mdk-stage1// max_fd = (socket[i].fd > max_fd) ? socket[i].fd : max_fd;
-//mdk-stage1//
-//mdk-stage1// /* First select() call: poll, don't wait */
-//mdk-stage1// tv.tv_sec = tv.tv_usec = 0;
-//mdk-stage1//
-//mdk-stage1// /* Wait for sockets in setup-pending state to settle */
-//mdk-stage1// if (one_pass || delay_fork)
-//mdk-stage1// wait_for_pending();
-//mdk-stage1//
-//mdk-stage1// for (pass = 0; ; pass++) {
-//mdk-stage1// FD_ZERO(&fds);
-//mdk-stage1// for (i = 0; i < sockets; i++)
-//mdk-stage1// FD_SET(socket[i].fd, &fds);
-//mdk-stage1//
-//mdk-stage1// while ((ret = select(max_fd+1, &fds, NULL, NULL,
-//mdk-stage1// ((pass == 0) ? &tv : NULL))) < 0) {
-//mdk-stage1// if (errno == EINTR) {
-//mdk-stage1// handle_signal();
-//mdk-stage1// } else {
-//mdk-stage1// syslog(LOG_ERR, "select(): %m");
-//mdk-stage1// exit(EXIT_FAILURE);
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// for (i = 0; i < sockets; i++) {
-//mdk-stage1// if (!FD_ISSET(socket[i].fd, &fds))
-//mdk-stage1// continue;
-//mdk-stage1// ret = read(socket[i].fd, &event, 4);
-//mdk-stage1// if ((ret == -1) && (errno != EAGAIN))
-//mdk-stage1// syslog(LOG_INFO, "read(%d): %m\n", i);
-//mdk-stage1// if (ret != 4)
-//mdk-stage1// continue;
-//mdk-stage1//
-//mdk-stage1// switch (event) {
-//mdk-stage1// case CS_EVENT_CARD_REMOVAL:
-//mdk-stage1// socket[i].state = 0;
-//mdk-stage1// do_remove(i);
-//mdk-stage1// break;
-//mdk-stage1// case CS_EVENT_EJECTION_REQUEST:
-//mdk-stage1// ret = do_check(i);
-//mdk-stage1// if (ret == 0) {
-//mdk-stage1// socket[i].state = 0;
-//mdk-stage1// do_remove(i);
-//mdk-stage1// }
-//mdk-stage1// write(socket[i].fd, &ret, 4);
-//mdk-stage1// break;
-//mdk-stage1// case CS_EVENT_CARD_INSERTION:
-//mdk-stage1// case CS_EVENT_INSERTION_REQUEST:
-//mdk-stage1// socket[i].state |= SOCKET_PRESENT;
-//mdk-stage1// case CS_EVENT_CARD_RESET:
-//mdk-stage1// socket[i].state |= SOCKET_READY;
-//mdk-stage1// do_insert(i);
-//mdk-stage1// break;
-//mdk-stage1// case CS_EVENT_RESET_PHYSICAL:
-//mdk-stage1// socket[i].state &= ~SOCKET_READY;
-//mdk-stage1// break;
-//mdk-stage1// case CS_EVENT_PM_SUSPEND:
-//mdk-stage1// do_suspend(i);
-//mdk-stage1// break;
-//mdk-stage1// case CS_EVENT_PM_RESUME:
-//mdk-stage1// do_resume(i);
-//mdk-stage1// break;
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// if (one_pass)
-//mdk-stage1// exit(EXIT_SUCCESS);
-//mdk-stage1// if (delay_fork) {
-//mdk-stage1// fork_now();
-//mdk-stage1// write_pid();
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// } /* repeat */
-//mdk-stage1// return 0;
-//mdk-stage1// }
-
-
-
-static void cardmgr_fail(void)
-{
- log_message("CM: cardmgr: failed");
-}
-
-int cardmgr_call(void)
-{
- int i, max_fd, ret, event;
- struct timeval tv;
- fd_set fds;
-
- stabfile = "/var/run/stab";
-
- log_message("CM: cardmgr/hacked starting, version is " CS_RELEASE);
-
- if (load_config()) {
- cardmgr_fail();
- return -1;
- }
-
- if (init_sockets()) {
- cardmgr_fail();
- return -1;
- }
-
- /* If we've gotten this far, then clean up pid and stab at exit */
- write_stab();
-
- for (i = max_fd = 0; i < sockets; i++)
- max_fd = (socket[i].fd > max_fd) ? socket[i].fd : max_fd;
-
- /* First select() call: poll, don't wait */
- tv.tv_sec = tv.tv_usec = 0;
-
- /* Wait for sockets in setup-pending state to settle */
- wait_for_pending();
-
-
- FD_ZERO(&fds);
- for (i = 0; i < sockets; i++)
- FD_SET(socket[i].fd, &fds);
-
- if (select(max_fd+1, &fds, NULL, NULL, &tv) < 0) {
- log_perror("CM: select fails");
- return -1;
- }
-
- for (i = 0; i < sockets; i++) {
- if (!FD_ISSET(socket[i].fd, &fds))
- continue;
- ret = read(socket[i].fd, &event, 4);
- if ((ret == -1) && (errno != EAGAIN))
- log_message("CM: read(%d): %m", i);
- if (ret != 4)
- continue;
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- case CS_EVENT_INSERTION_REQUEST:
- socket[i].state |= SOCKET_PRESENT;
- case CS_EVENT_CARD_RESET:
- socket[i].state |= SOCKET_READY;
- do_insert(i);
- break;
- case CS_EVENT_RESET_PHYSICAL:
- socket[i].state &= ~SOCKET_READY;
- break;
- }
-
- }
-
- return 0;
-
-}
diff --git a/mdk-stage1/pcmcia_/cardmgr.h b/mdk-stage1/pcmcia_/cardmgr.h
deleted file mode 100644
index 1d002e972..000000000
--- a/mdk-stage1/pcmcia_/cardmgr.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * cardmgr.h 1.37 2001/08/24 12:19:20
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define MAX_SOCKS 8
-#define MAX_BINDINGS 4
-#define MAX_MODULES 4
-
-typedef struct adjust_list_t {
- adjust_t adj;
- struct adjust_list_t *next;
-} adjust_list_t;
-
-typedef struct func_ident_t {
- u_char funcid;
-} func_ident_t;
-
-typedef struct manfid_ident_t {
- u_short manf;
- u_short card;
-} manfid_ident_t;
-
-typedef struct vers_ident_t {
- int ns;
- char *pi[4];
-} vers_ident_t;
-
-typedef struct tuple_ident_t {
- cisdata_t code;
- long ofs;
- char *info;
-} tuple_ident_t;
-
-typedef struct device_info_t {
- dev_info_t dev_info;
- int needs_mtd;
- int modules;
- char *module[MAX_MODULES];
- char *opts[MAX_MODULES];
- char *class;
- int refs;
- struct device_info_t *next;
-} device_info_t;
-
-#define VERS_1_IDENT 0x0001
-#define MANFID_IDENT 0x0002
-#define TUPLE_IDENT 0x0010
-#define FUNC_IDENT 0x0020
-#define BLANK_IDENT 0x0040
-#define PCI_IDENT 0x0080
-#define EXCL_IDENT 0x00f0
-
-typedef struct card_info_t {
- char *name;
- int ident_type;
- union {
- vers_ident_t vers;
- tuple_ident_t tuple;
- func_ident_t func;
- } id;
- manfid_ident_t manfid;
- int bindings;
- device_info_t *device[MAX_BINDINGS];
- int dev_fn[MAX_BINDINGS];
- char *cis_file;
- int refs;
- struct card_info_t *next;
-} card_info_t;
-
-typedef struct mtd_ident_t {
- char *name;
- enum {
- JEDEC_MTD=1, DTYPE_MTD, DEFAULT_MTD
- } mtd_type;
- int dtype, jedec_mfr, jedec_info;
- char *module, *opts;
- int refs;
- struct mtd_ident_t *next;
-} mtd_ident_t;
-
-extern adjust_list_t *root_adjust;
-extern device_info_t *root_device;
-extern card_info_t *blank_card;
-extern card_info_t *root_card, *root_func;
-extern mtd_ident_t *root_mtd, *default_mtd;
-
-int parse_configfile(char *fn);
diff --git a/mdk-stage1/pcmcia_/cirrus.h b/mdk-stage1/pcmcia_/cirrus.h
deleted file mode 100644
index 49d7fa2de..000000000
--- a/mdk-stage1/pcmcia_/cirrus.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * cirrus.h 1.10 2001/08/24 12:15:33
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CIRRUS_H
-#define _LINUX_CIRRUS_H
-
-#ifndef PCI_VENDOR_ID_CIRRUS
-#define PCI_VENDOR_ID_CIRRUS 0x1013
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6729
-#define PCI_DEVICE_ID_CIRRUS_6729 0x1100
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6832
-#define PCI_DEVICE_ID_CIRRUS_6832 0x1110
-#endif
-
-#define PD67_MISC_CTL_1 0x16 /* Misc control 1 */
-#define PD67_FIFO_CTL 0x17 /* FIFO control */
-#define PD67_MISC_CTL_2 0x1E /* Misc control 2 */
-#define PD67_CHIP_INFO 0x1f /* Chip information */
-#define PD67_ATA_CTL 0x026 /* 6730: ATA control */
-#define PD67_EXT_INDEX 0x2e /* Extension index */
-#define PD67_EXT_DATA 0x2f /* Extension data */
-
-#define pd67_ext_get(s, r) \
- (i365_set(s, PD67_EXT_INDEX, r), i365_get(s, PD67_EXT_DATA))
-#define pd67_ext_set(s, r, v) \
- (i365_set(s, PD67_EXT_INDEX, r), i365_set(s, PD67_EXT_DATA, v))
-
-/* PD6722 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD67_DATA_MASK0 0x01 /* Data mask 0 */
-#define PD67_DATA_MASK1 0x02 /* Data mask 1 */
-#define PD67_DMA_CTL 0x03 /* DMA control */
-
-/* PD6730 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD67_EXT_CTL_1 0x03 /* Extension control 1 */
-#define PD67_MEM_PAGE(n) ((n)+5) /* PCI window bits 31:24 */
-#define PD67_EXTERN_DATA 0x0a
-#define PD67_MISC_CTL_3 0x25
-#define PD67_SMB_PWR_CTL 0x26
-
-/* I/O window address offset */
-#define PD67_IO_OFF(w) (0x36+((w)<<1))
-
-/* Timing register sets */
-#define PD67_TIME_SETUP(n) (0x3a + 3*(n))
-#define PD67_TIME_CMD(n) (0x3b + 3*(n))
-#define PD67_TIME_RECOV(n) (0x3c + 3*(n))
-
-/* Flags for PD67_MISC_CTL_1 */
-#define PD67_MC1_5V_DET 0x01 /* 5v detect */
-#define PD67_MC1_MEDIA_ENA 0x01 /* 6730: Multimedia enable */
-#define PD67_MC1_VCC_3V 0x02 /* 3.3v Vcc */
-#define PD67_MC1_PULSE_MGMT 0x04
-#define PD67_MC1_PULSE_IRQ 0x08
-#define PD67_MC1_SPKR_ENA 0x10
-#define PD67_MC1_INPACK_ENA 0x80
-
-/* Flags for PD67_FIFO_CTL */
-#define PD67_FIFO_EMPTY 0x80
-
-/* Flags for PD67_MISC_CTL_2 */
-#define PD67_MC2_FREQ_BYPASS 0x01
-#define PD67_MC2_DYNAMIC_MODE 0x02
-#define PD67_MC2_SUSPEND 0x04
-#define PD67_MC2_5V_CORE 0x08
-#define PD67_MC2_LED_ENA 0x10 /* IRQ 12 is LED enable */
-#define PD67_MC2_FAST_PCI 0x10 /* 6729: PCI bus > 25 MHz */
-#define PD67_MC2_3STATE_BIT7 0x20 /* Floppy change bit */
-#define PD67_MC2_DMA_MODE 0x40
-#define PD67_MC2_IRQ15_RI 0x80 /* IRQ 15 is ring enable */
-
-/* Flags for PD67_CHIP_INFO */
-#define PD67_INFO_SLOTS 0x20 /* 0 = 1 slot, 1 = 2 slots */
-#define PD67_INFO_CHIP_ID 0xc0
-#define PD67_INFO_REV 0x1c
-
-/* Fields in PD67_TIME_* registers */
-#define PD67_TIME_SCALE 0xc0
-#define PD67_TIME_SCALE_1 0x00
-#define PD67_TIME_SCALE_16 0x40
-#define PD67_TIME_SCALE_256 0x80
-#define PD67_TIME_SCALE_4096 0xc0
-#define PD67_TIME_MULT 0x3f
-
-/* Fields in PD67_DMA_CTL */
-#define PD67_DMA_MODE 0xc0
-#define PD67_DMA_OFF 0x00
-#define PD67_DMA_DREQ_INPACK 0x40
-#define PD67_DMA_DREQ_WP 0x80
-#define PD67_DMA_DREQ_BVD2 0xc0
-#define PD67_DMA_PULLUP 0x20 /* Disable socket pullups? */
-
-/* Fields in PD67_EXT_CTL_1 */
-#define PD67_EC1_VCC_PWR_LOCK 0x01
-#define PD67_EC1_AUTO_PWR_CLEAR 0x02
-#define PD67_EC1_LED_ENA 0x04
-#define PD67_EC1_INV_CARD_IRQ 0x08
-#define PD67_EC1_INV_MGMT_IRQ 0x10
-#define PD67_EC1_PULLUP_CTL 0x20
-
-/* Fields in PD67_EXTERN_DATA */
-#define PD67_EXD_VS1(s) (0x01 << ((s)<<1))
-#define PD67_EXD_VS2(s) (0x02 << ((s)<<1))
-
-/* Fields in PD67_MISC_CTL_3 */
-#define PD67_MC3_IRQ_MASK 0x03
-#define PD67_MC3_IRQ_PCPCI 0x00
-#define PD67_MC3_IRQ_EXTERN 0x01
-#define PD67_MC3_IRQ_PCIWAY 0x02
-#define PD67_MC3_IRQ_PCI 0x03
-#define PD67_MC3_PWR_MASK 0x0c
-#define PD67_MC3_PWR_SERIAL 0x00
-#define PD67_MC3_PWR_TI2202 0x08
-#define PD67_MC3_PWR_SMB 0x0c
-
-/* Register definitions for Cirrus PD6832 PCI-to-CardBus bridge */
-
-/* PD6832 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD68_EXT_CTL_2 0x0b
-#define PD68_PCI_SPACE 0x22
-#define PD68_PCCARD_SPACE 0x23
-#define PD68_WINDOW_TYPE 0x24
-#define PD68_EXT_CSC 0x2e
-#define PD68_MISC_CTL_4 0x2f
-#define PD68_MISC_CTL_5 0x30
-#define PD68_MISC_CTL_6 0x31
-
-/* Extra flags in PD67_MISC_CTL_3 */
-#define PD68_MC3_HW_SUSP 0x10
-#define PD68_MC3_MM_EXPAND 0x40
-#define PD68_MC3_MM_ARM 0x80
-
-/* Bridge Control Register */
-#define PD6832_BCR_MGMT_IRQ_ENA 0x0800
-
-/* Socket Number Register */
-#define PD6832_SOCKET_NUMBER 0x004c /* 8 bit */
-
-/* Data structure for tracking vendor-specific state */
-typedef struct cirrus_state_t {
- u_char misc1; /* PD67_MISC_CTL_1 */
- u_char misc2; /* PD67_MISC_CTL_2 */
- u_char ectl1; /* PD67_EXT_CTL_1 */
- u_char timer[6]; /* PD67_TIME_* */
-} cirrus_state_t;
-
-#define CIRRUS_PCIC_ID \
- IS_PD6729, IS_PD6730, IS_PD6832
-
-#define CIRRUS_PCIC_INFO \
- { "Cirrus PD6729", IS_CIRRUS|IS_PCI, ID(CIRRUS, 6729) }, \
- { "Cirrus PD6730", IS_CIRRUS|IS_PCI, PCI_VENDOR_ID_CIRRUS, -1 }, \
- { "Cirrus PD6832", IS_CIRRUS|IS_CARDBUS, ID(CIRRUS, 6832) }
-
-#endif /* _LINUX_CIRRUS_H */
diff --git a/mdk-stage1/pcmcia_/cistpl.h b/mdk-stage1/pcmcia_/cistpl.h
deleted file mode 100644
index 1d4cac20e..000000000
--- a/mdk-stage1/pcmcia_/cistpl.h
+++ /dev/null
@@ -1,604 +0,0 @@
-/*
- * cistpl.h 1.35 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CISTPL_H
-#define _LINUX_CISTPL_H
-
-#define CISTPL_NULL 0x00
-#define CISTPL_DEVICE 0x01
-#define CISTPL_LONGLINK_CB 0x02
-#define CISTPL_INDIRECT 0x03
-#define CISTPL_CONFIG_CB 0x04
-#define CISTPL_CFTABLE_ENTRY_CB 0x05
-#define CISTPL_LONGLINK_MFC 0x06
-#define CISTPL_BAR 0x07
-#define CISTPL_PWR_MGMNT 0x08
-#define CISTPL_EXTDEVICE 0x09
-#define CISTPL_CHECKSUM 0x10
-#define CISTPL_LONGLINK_A 0x11
-#define CISTPL_LONGLINK_C 0x12
-#define CISTPL_LINKTARGET 0x13
-#define CISTPL_NO_LINK 0x14
-#define CISTPL_VERS_1 0x15
-#define CISTPL_ALTSTR 0x16
-#define CISTPL_DEVICE_A 0x17
-#define CISTPL_JEDEC_C 0x18
-#define CISTPL_JEDEC_A 0x19
-#define CISTPL_CONFIG 0x1a
-#define CISTPL_CFTABLE_ENTRY 0x1b
-#define CISTPL_DEVICE_OC 0x1c
-#define CISTPL_DEVICE_OA 0x1d
-#define CISTPL_DEVICE_GEO 0x1e
-#define CISTPL_DEVICE_GEO_A 0x1f
-#define CISTPL_MANFID 0x20
-#define CISTPL_FUNCID 0x21
-#define CISTPL_FUNCE 0x22
-#define CISTPL_SWIL 0x23
-#define CISTPL_END 0xff
-/* Layer 2 tuples */
-#define CISTPL_VERS_2 0x40
-#define CISTPL_FORMAT 0x41
-#define CISTPL_GEOMETRY 0x42
-#define CISTPL_BYTEORDER 0x43
-#define CISTPL_DATE 0x44
-#define CISTPL_BATTERY 0x45
-#define CISTPL_FORMAT_A 0x47
-/* Layer 3 tuples */
-#define CISTPL_ORG 0x46
-#define CISTPL_SPCL 0x90
-
-typedef struct cistpl_longlink_t {
- u_int addr;
-} cistpl_longlink_t;
-
-typedef struct cistpl_checksum_t {
- u_short addr;
- u_short len;
- u_char sum;
-} cistpl_checksum_t;
-
-#define CISTPL_MAX_FUNCTIONS 8
-#define CISTPL_MFC_ATTR 0x00
-#define CISTPL_MFC_COMMON 0x01
-
-typedef struct cistpl_longlink_mfc_t {
- u_char nfn;
- struct {
- u_char space;
- u_int addr;
- } fn[CISTPL_MAX_FUNCTIONS];
-} cistpl_longlink_mfc_t;
-
-#define CISTPL_MAX_ALTSTR_STRINGS 4
-
-typedef struct cistpl_altstr_t {
- u_char ns;
- u_char ofs[CISTPL_MAX_ALTSTR_STRINGS];
- char str[254];
-} cistpl_altstr_t;
-
-#define CISTPL_DTYPE_NULL 0x00
-#define CISTPL_DTYPE_ROM 0x01
-#define CISTPL_DTYPE_OTPROM 0x02
-#define CISTPL_DTYPE_EPROM 0x03
-#define CISTPL_DTYPE_EEPROM 0x04
-#define CISTPL_DTYPE_FLASH 0x05
-#define CISTPL_DTYPE_SRAM 0x06
-#define CISTPL_DTYPE_DRAM 0x07
-#define CISTPL_DTYPE_FUNCSPEC 0x0d
-#define CISTPL_DTYPE_EXTEND 0x0e
-
-#define CISTPL_MAX_DEVICES 4
-
-typedef struct cistpl_device_t {
- u_char ndev;
- struct {
- u_char type;
- u_char wp;
- u_int speed;
- u_int size;
- } dev[CISTPL_MAX_DEVICES];
-} cistpl_device_t;
-
-#define CISTPL_DEVICE_MWAIT 0x01
-#define CISTPL_DEVICE_3VCC 0x02
-
-typedef struct cistpl_device_o_t {
- u_char flags;
- cistpl_device_t device;
-} cistpl_device_o_t;
-
-#define CISTPL_VERS_1_MAX_PROD_STRINGS 4
-
-typedef struct cistpl_vers_1_t {
- u_char major;
- u_char minor;
- u_char ns;
- u_char ofs[CISTPL_VERS_1_MAX_PROD_STRINGS];
- char str[254];
-} cistpl_vers_1_t;
-
-typedef struct cistpl_jedec_t {
- u_char nid;
- struct {
- u_char mfr;
- u_char info;
- } id[CISTPL_MAX_DEVICES];
-} cistpl_jedec_t;
-
-typedef struct cistpl_manfid_t {
- u_short manf;
- u_short card;
-} cistpl_manfid_t;
-
-#define CISTPL_FUNCID_MULTI 0x00
-#define CISTPL_FUNCID_MEMORY 0x01
-#define CISTPL_FUNCID_SERIAL 0x02
-#define CISTPL_FUNCID_PARALLEL 0x03
-#define CISTPL_FUNCID_FIXED 0x04
-#define CISTPL_FUNCID_VIDEO 0x05
-#define CISTPL_FUNCID_NETWORK 0x06
-#define CISTPL_FUNCID_AIMS 0x07
-#define CISTPL_FUNCID_SCSI 0x08
-
-#define CISTPL_SYSINIT_POST 0x01
-#define CISTPL_SYSINIT_ROM 0x02
-
-typedef struct cistpl_funcid_t {
- u_char func;
- u_char sysinit;
-} cistpl_funcid_t;
-
-typedef struct cistpl_funce_t {
- u_char type;
- u_char data[0];
-} cistpl_funce_t;
-
-/*======================================================================
-
- Modem Function Extension Tuples
-
-======================================================================*/
-
-#define CISTPL_FUNCE_SERIAL_IF 0x00
-#define CISTPL_FUNCE_SERIAL_CAP 0x01
-#define CISTPL_FUNCE_SERIAL_SERV_DATA 0x02
-#define CISTPL_FUNCE_SERIAL_SERV_FAX 0x03
-#define CISTPL_FUNCE_SERIAL_SERV_VOICE 0x04
-#define CISTPL_FUNCE_SERIAL_CAP_DATA 0x05
-#define CISTPL_FUNCE_SERIAL_CAP_FAX 0x06
-#define CISTPL_FUNCE_SERIAL_CAP_VOICE 0x07
-#define CISTPL_FUNCE_SERIAL_IF_DATA 0x08
-#define CISTPL_FUNCE_SERIAL_IF_FAX 0x09
-#define CISTPL_FUNCE_SERIAL_IF_VOICE 0x0a
-
-/* UART identification */
-#define CISTPL_SERIAL_UART_8250 0x00
-#define CISTPL_SERIAL_UART_16450 0x01
-#define CISTPL_SERIAL_UART_16550 0x02
-#define CISTPL_SERIAL_UART_8251 0x03
-#define CISTPL_SERIAL_UART_8530 0x04
-#define CISTPL_SERIAL_UART_85230 0x05
-
-/* UART capabilities */
-#define CISTPL_SERIAL_UART_SPACE 0x01
-#define CISTPL_SERIAL_UART_MARK 0x02
-#define CISTPL_SERIAL_UART_ODD 0x04
-#define CISTPL_SERIAL_UART_EVEN 0x08
-#define CISTPL_SERIAL_UART_5BIT 0x01
-#define CISTPL_SERIAL_UART_6BIT 0x02
-#define CISTPL_SERIAL_UART_7BIT 0x04
-#define CISTPL_SERIAL_UART_8BIT 0x08
-#define CISTPL_SERIAL_UART_1STOP 0x10
-#define CISTPL_SERIAL_UART_MSTOP 0x20
-#define CISTPL_SERIAL_UART_2STOP 0x40
-
-typedef struct cistpl_serial_t {
- u_char uart_type;
- u_char uart_cap_0;
- u_char uart_cap_1;
-} cistpl_serial_t;
-
-typedef struct cistpl_modem_cap_t {
- u_char flow;
- u_char cmd_buf;
- u_char rcv_buf_0, rcv_buf_1, rcv_buf_2;
- u_char xmit_buf_0, xmit_buf_1, xmit_buf_2;
-} cistpl_modem_cap_t;
-
-#define CISTPL_SERIAL_MOD_103 0x01
-#define CISTPL_SERIAL_MOD_V21 0x02
-#define CISTPL_SERIAL_MOD_V23 0x04
-#define CISTPL_SERIAL_MOD_V22 0x08
-#define CISTPL_SERIAL_MOD_212A 0x10
-#define CISTPL_SERIAL_MOD_V22BIS 0x20
-#define CISTPL_SERIAL_MOD_V26 0x40
-#define CISTPL_SERIAL_MOD_V26BIS 0x80
-#define CISTPL_SERIAL_MOD_V27BIS 0x01
-#define CISTPL_SERIAL_MOD_V29 0x02
-#define CISTPL_SERIAL_MOD_V32 0x04
-#define CISTPL_SERIAL_MOD_V32BIS 0x08
-#define CISTPL_SERIAL_MOD_V34 0x10
-
-#define CISTPL_SERIAL_ERR_MNP2_4 0x01
-#define CISTPL_SERIAL_ERR_V42_LAPM 0x02
-
-#define CISTPL_SERIAL_CMPR_V42BIS 0x01
-#define CISTPL_SERIAL_CMPR_MNP5 0x02
-
-#define CISTPL_SERIAL_CMD_AT1 0x01
-#define CISTPL_SERIAL_CMD_AT2 0x02
-#define CISTPL_SERIAL_CMD_AT3 0x04
-#define CISTPL_SERIAL_CMD_MNP_AT 0x08
-#define CISTPL_SERIAL_CMD_V25BIS 0x10
-#define CISTPL_SERIAL_CMD_V25A 0x20
-#define CISTPL_SERIAL_CMD_DMCL 0x40
-
-typedef struct cistpl_data_serv_t {
- u_char max_data_0;
- u_char max_data_1;
- u_char modulation_0;
- u_char modulation_1;
- u_char error_control;
- u_char compression;
- u_char cmd_protocol;
- u_char escape;
- u_char encrypt;
- u_char misc_features;
- u_char ccitt_code[0];
-} cistpl_data_serv_t;
-
-typedef struct cistpl_fax_serv_t {
- u_char max_data_0;
- u_char max_data_1;
- u_char modulation;
- u_char encrypt;
- u_char features_0;
- u_char features_1;
- u_char ccitt_code[0];
-} cistpl_fax_serv_t;
-
-typedef struct cistpl_voice_serv_t {
- u_char max_data_0;
- u_char max_data_1;
-} cistpl_voice_serv_t;
-
-/*======================================================================
-
- LAN Function Extension Tuples
-
-======================================================================*/
-
-#define CISTPL_FUNCE_LAN_TECH 0x01
-#define CISTPL_FUNCE_LAN_SPEED 0x02
-#define CISTPL_FUNCE_LAN_MEDIA 0x03
-#define CISTPL_FUNCE_LAN_NODE_ID 0x04
-#define CISTPL_FUNCE_LAN_CONNECTOR 0x05
-
-/* LAN technologies */
-#define CISTPL_LAN_TECH_ARCNET 0x01
-#define CISTPL_LAN_TECH_ETHERNET 0x02
-#define CISTPL_LAN_TECH_TOKENRING 0x03
-#define CISTPL_LAN_TECH_LOCALTALK 0x04
-#define CISTPL_LAN_TECH_FDDI 0x05
-#define CISTPL_LAN_TECH_ATM 0x06
-#define CISTPL_LAN_TECH_WIRELESS 0x07
-
-typedef struct cistpl_lan_tech_t {
- u_char tech;
-} cistpl_lan_tech_t;
-
-typedef struct cistpl_lan_speed_t {
- u_int speed;
-} cistpl_lan_speed_t;
-
-/* LAN media definitions */
-#define CISTPL_LAN_MEDIA_UTP 0x01
-#define CISTPL_LAN_MEDIA_STP 0x02
-#define CISTPL_LAN_MEDIA_THIN_COAX 0x03
-#define CISTPL_LAN_MEDIA_THICK_COAX 0x04
-#define CISTPL_LAN_MEDIA_FIBER 0x05
-#define CISTPL_LAN_MEDIA_900MHZ 0x06
-#define CISTPL_LAN_MEDIA_2GHZ 0x07
-#define CISTPL_LAN_MEDIA_5GHZ 0x08
-#define CISTPL_LAN_MEDIA_DIFF_IR 0x09
-#define CISTPL_LAN_MEDIA_PTP_IR 0x0a
-
-typedef struct cistpl_lan_media_t {
- u_char media;
-} cistpl_lan_media_t;
-
-typedef struct cistpl_lan_node_id_t {
- u_char nb;
- u_char id[16];
-} cistpl_lan_node_id_t;
-
-typedef struct cistpl_lan_connector_t {
- u_char code;
-} cistpl_lan_connector_t;
-
-/*======================================================================
-
- IDE Function Extension Tuples
-
-======================================================================*/
-
-#define CISTPL_IDE_INTERFACE 0x01
-
-typedef struct cistpl_ide_interface_t {
- u_char interface;
-} cistpl_ide_interface_t;
-
-/* First feature byte */
-#define CISTPL_IDE_SILICON 0x04
-#define CISTPL_IDE_UNIQUE 0x08
-#define CISTPL_IDE_DUAL 0x10
-
-/* Second feature byte */
-#define CISTPL_IDE_HAS_SLEEP 0x01
-#define CISTPL_IDE_HAS_STANDBY 0x02
-#define CISTPL_IDE_HAS_IDLE 0x04
-#define CISTPL_IDE_LOW_POWER 0x08
-#define CISTPL_IDE_REG_INHIBIT 0x10
-#define CISTPL_IDE_HAS_INDEX 0x20
-#define CISTPL_IDE_IOIS16 0x40
-
-typedef struct cistpl_ide_feature_t {
- u_char feature1;
- u_char feature2;
-} cistpl_ide_feature_t;
-
-#define CISTPL_FUNCE_IDE_IFACE 0x01
-#define CISTPL_FUNCE_IDE_MASTER 0x02
-#define CISTPL_FUNCE_IDE_SLAVE 0x03
-
-/*======================================================================
-
- Configuration Table Entries
-
-======================================================================*/
-
-#define CISTPL_BAR_SPACE 0x07
-#define CISTPL_BAR_SPACE_IO 0x10
-#define CISTPL_BAR_PREFETCH 0x20
-#define CISTPL_BAR_CACHEABLE 0x40
-#define CISTPL_BAR_1MEG_MAP 0x80
-
-typedef struct cistpl_bar_t {
- u_char attr;
- u_int size;
-} cistpl_bar_t;
-
-typedef struct cistpl_config_t {
- u_char last_idx;
- u_int base;
- u_int rmask[4];
- u_char subtuples;
-} cistpl_config_t;
-
-/* These are bits in the 'present' field, and indices in 'param' */
-#define CISTPL_POWER_VNOM 0
-#define CISTPL_POWER_VMIN 1
-#define CISTPL_POWER_VMAX 2
-#define CISTPL_POWER_ISTATIC 3
-#define CISTPL_POWER_IAVG 4
-#define CISTPL_POWER_IPEAK 5
-#define CISTPL_POWER_IDOWN 6
-
-#define CISTPL_POWER_HIGHZ_OK 0x01
-#define CISTPL_POWER_HIGHZ_REQ 0x02
-
-typedef struct cistpl_power_t {
- u_char present;
- u_char flags;
- u_int param[7];
-} cistpl_power_t;
-
-typedef struct cistpl_timing_t {
- u_int wait, waitscale;
- u_int ready, rdyscale;
- u_int reserved, rsvscale;
-} cistpl_timing_t;
-
-#define CISTPL_IO_LINES_MASK 0x1f
-#define CISTPL_IO_8BIT 0x20
-#define CISTPL_IO_16BIT 0x40
-#define CISTPL_IO_RANGE 0x80
-
-#define CISTPL_IO_MAX_WIN 16
-
-typedef struct cistpl_io_t {
- u_char flags;
- u_char nwin;
- struct {
- u_int base;
- u_int len;
- } win[CISTPL_IO_MAX_WIN];
-} cistpl_io_t;
-
-typedef struct cistpl_irq_t {
- u_int IRQInfo1;
- u_int IRQInfo2;
-} cistpl_irq_t;
-
-#define CISTPL_MEM_MAX_WIN 8
-
-typedef struct cistpl_mem_t {
- u_char flags;
- u_char nwin;
- struct {
- u_int len;
- u_int card_addr;
- u_int host_addr;
- } win[CISTPL_MEM_MAX_WIN];
-} cistpl_mem_t;
-
-#define CISTPL_CFTABLE_DEFAULT 0x0001
-#define CISTPL_CFTABLE_BVDS 0x0002
-#define CISTPL_CFTABLE_WP 0x0004
-#define CISTPL_CFTABLE_RDYBSY 0x0008
-#define CISTPL_CFTABLE_MWAIT 0x0010
-#define CISTPL_CFTABLE_AUDIO 0x0800
-#define CISTPL_CFTABLE_READONLY 0x1000
-#define CISTPL_CFTABLE_PWRDOWN 0x2000
-
-typedef struct cistpl_cftable_entry_t {
- u_char index;
- u_short flags;
- u_char interface;
- cistpl_power_t vcc, vpp1, vpp2;
- cistpl_timing_t timing;
- cistpl_io_t io;
- cistpl_irq_t irq;
- cistpl_mem_t mem;
- u_char subtuples;
-} cistpl_cftable_entry_t;
-
-#define CISTPL_CFTABLE_MASTER 0x000100
-#define CISTPL_CFTABLE_INVALIDATE 0x000200
-#define CISTPL_CFTABLE_VGA_PALETTE 0x000400
-#define CISTPL_CFTABLE_PARITY 0x000800
-#define CISTPL_CFTABLE_WAIT 0x001000
-#define CISTPL_CFTABLE_SERR 0x002000
-#define CISTPL_CFTABLE_FAST_BACK 0x004000
-#define CISTPL_CFTABLE_BINARY_AUDIO 0x010000
-#define CISTPL_CFTABLE_PWM_AUDIO 0x020000
-
-typedef struct cistpl_cftable_entry_cb_t {
- u_char index;
- u_int flags;
- cistpl_power_t vcc, vpp1, vpp2;
- u_char io;
- cistpl_irq_t irq;
- u_char mem;
- u_char subtuples;
-} cistpl_cftable_entry_cb_t;
-
-typedef struct cistpl_device_geo_t {
- u_char ngeo;
- struct {
- u_char buswidth;
- u_int erase_block;
- u_int read_block;
- u_int write_block;
- u_int partition;
- u_int interleave;
- } geo[CISTPL_MAX_DEVICES];
-} cistpl_device_geo_t;
-
-typedef struct cistpl_vers_2_t {
- u_char vers;
- u_char comply;
- u_short dindex;
- u_char vspec8, vspec9;
- u_char nhdr;
- u_char vendor, info;
- char str[244];
-} cistpl_vers_2_t;
-
-typedef struct cistpl_org_t {
- u_char data_org;
- char desc[30];
-} cistpl_org_t;
-
-#define CISTPL_ORG_FS 0x00
-#define CISTPL_ORG_APPSPEC 0x01
-#define CISTPL_ORG_XIP 0x02
-
-typedef struct cistpl_format_t {
- u_char type;
- u_char edc;
- u_int offset;
- u_int length;
-} cistpl_format_t;
-
-#define CISTPL_FORMAT_DISK 0x00
-#define CISTPL_FORMAT_MEM 0x01
-
-#define CISTPL_EDC_NONE 0x00
-#define CISTPL_EDC_CKSUM 0x01
-#define CISTPL_EDC_CRC 0x02
-#define CISTPL_EDC_PCC 0x03
-
-typedef union cisparse_t {
- cistpl_device_t device;
- cistpl_checksum_t checksum;
- cistpl_longlink_t longlink;
- cistpl_longlink_mfc_t longlink_mfc;
- cistpl_vers_1_t version_1;
- cistpl_altstr_t altstr;
- cistpl_jedec_t jedec;
- cistpl_manfid_t manfid;
- cistpl_funcid_t funcid;
- cistpl_funce_t funce;
- cistpl_bar_t bar;
- cistpl_config_t config;
- cistpl_cftable_entry_t cftable_entry;
- cistpl_cftable_entry_cb_t cftable_entry_cb;
- cistpl_device_geo_t device_geo;
- cistpl_vers_2_t vers_2;
- cistpl_org_t org;
- cistpl_format_t format;
-} cisparse_t;
-
-typedef struct tuple_t {
- u_int Attributes;
- cisdata_t DesiredTuple;
- u_int Flags; /* internal use */
- u_int LinkOffset; /* internal use */
- u_int CISOffset; /* internal use */
- cisdata_t TupleCode;
- cisdata_t TupleLink;
- cisdata_t TupleOffset;
- cisdata_t TupleDataMax;
- cisdata_t TupleDataLen;
- cisdata_t *TupleData;
-} tuple_t;
-
-/* Special cisdata_t value */
-#define RETURN_FIRST_TUPLE 0xff
-
-/* Attributes for tuple calls */
-#define TUPLE_RETURN_LINK 0x01
-#define TUPLE_RETURN_COMMON 0x02
-
-/* For ValidateCIS */
-typedef struct cisinfo_t {
- u_int Chains;
-} cisinfo_t;
-
-#define CISTPL_MAX_CIS_SIZE 0x200
-
-/* For ReplaceCIS */
-typedef struct cisdump_t {
- u_int Length;
- cisdata_t Data[CISTPL_MAX_CIS_SIZE];
-} cisdump_t;
-
-#endif /* LINUX_CISTPL_H */
diff --git a/mdk-stage1/pcmcia_/cs.h b/mdk-stage1/pcmcia_/cs.h
deleted file mode 100644
index dea6937eb..000000000
--- a/mdk-stage1/pcmcia_/cs.h
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * cs.h 1.73 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CS_H
-#define _LINUX_CS_H
-
-/* For AccessConfigurationRegister */
-typedef struct conf_reg_t {
- u_char Function;
- u_int Action;
- off_t Offset;
- u_int Value;
-} conf_reg_t;
-
-/* Actions */
-#define CS_READ 1
-#define CS_WRITE 2
-
-/* for AdjustResourceInfo */
-typedef struct adjust_t {
- u_int Action;
- u_int Resource;
- u_int Attributes;
- union {
- struct memory {
- u_long Base;
- u_long Size;
- } memory;
- struct io {
- ioaddr_t BasePort;
- ioaddr_t NumPorts;
- u_int IOAddrLines;
- } io;
- struct irq {
- u_int IRQ;
- } irq;
- } resource;
-} adjust_t;
-
-/* Action field */
-#define REMOVE_MANAGED_RESOURCE 1
-#define ADD_MANAGED_RESOURCE 2
-#define GET_FIRST_MANAGED_RESOURCE 3
-#define GET_NEXT_MANAGED_RESOURCE 4
-/* Resource field */
-#define RES_MEMORY_RANGE 1
-#define RES_IO_RANGE 2
-#define RES_IRQ 3
-/* Attribute field */
-#define RES_IRQ_TYPE 0x03
-#define RES_IRQ_TYPE_EXCLUSIVE 0
-#define RES_IRQ_TYPE_TIME 1
-#define RES_IRQ_TYPE_DYNAMIC 2
-#define RES_IRQ_CSC 0x04
-#define RES_SHARED 0x08
-#define RES_RESERVED 0x10
-#define RES_ALLOCATED 0x20
-#define RES_REMOVED 0x40
-
-typedef struct servinfo_t {
- char Signature[2];
- u_int Count;
- u_int Revision;
- u_int CSLevel;
- char *VendorString;
-} servinfo_t;
-
-typedef struct event_callback_args_t {
- client_handle_t client_handle;
- void *info;
- void *mtdrequest;
- void *buffer;
- void *misc;
- void *client_data;
- struct bus_operations *bus;
-} event_callback_args_t;
-
-/* for GetConfigurationInfo */
-typedef struct config_info_t {
- u_char Function;
- u_int Attributes;
- u_int Vcc, Vpp1, Vpp2;
- u_int IntType;
- u_int ConfigBase;
- u_char Status, Pin, Copy, Option, ExtStatus;
- u_int Present;
- u_int CardValues;
- u_int AssignedIRQ;
- u_int IRQAttributes;
- ioaddr_t BasePort1;
- ioaddr_t NumPorts1;
- u_int Attributes1;
- ioaddr_t BasePort2;
- ioaddr_t NumPorts2;
- u_int Attributes2;
- u_int IOAddrLines;
-} config_info_t;
-
-/* For CardValues field */
-#define CV_OPTION_VALUE 0x01
-#define CV_STATUS_VALUE 0x02
-#define CV_PIN_REPLACEMENT 0x04
-#define CV_COPY_VALUE 0x08
-#define CV_EXT_STATUS 0x10
-
-/* For GetFirst/NextClient */
-typedef struct client_req_t {
- socket_t Socket;
- u_int Attributes;
-} client_req_t;
-
-#define CLIENT_THIS_SOCKET 0x01
-
-/* For RegisterClient */
-typedef struct client_reg_t {
- dev_info_t *dev_info;
- u_int Attributes;
- u_int EventMask;
- int (*event_handler)(event_t event, int priority,
- event_callback_args_t *);
- event_callback_args_t event_callback_args;
- u_int Version;
-} client_reg_t;
-
-/* ModifyConfiguration */
-typedef struct modconf_t {
- u_int Attributes;
- u_int Vcc, Vpp1, Vpp2;
-} modconf_t;
-
-/* Attributes for ModifyConfiguration */
-#define CONF_IRQ_CHANGE_VALID 0x100
-#define CONF_VCC_CHANGE_VALID 0x200
-#define CONF_VPP1_CHANGE_VALID 0x400
-#define CONF_VPP2_CHANGE_VALID 0x800
-
-/* For RequestConfiguration */
-typedef struct config_req_t {
- u_int Attributes;
- u_int Vcc, Vpp1, Vpp2;
- u_int IntType;
- u_int ConfigBase;
- u_char Status, Pin, Copy, ExtStatus;
- u_char ConfigIndex;
- u_int Present;
-} config_req_t;
-
-/* Attributes for RequestConfiguration */
-#define CONF_ENABLE_IRQ 0x01
-#define CONF_ENABLE_DMA 0x02
-#define CONF_ENABLE_SPKR 0x04
-#define CONF_VALID_CLIENT 0x100
-
-/* IntType field */
-#define INT_MEMORY 0x01
-#define INT_MEMORY_AND_IO 0x02
-#define INT_CARDBUS 0x04
-#define INT_ZOOMED_VIDEO 0x08
-
-/* For RequestIO and ReleaseIO */
-typedef struct io_req_t {
- ioaddr_t BasePort1;
- ioaddr_t NumPorts1;
- u_int Attributes1;
- ioaddr_t BasePort2;
- ioaddr_t NumPorts2;
- u_int Attributes2;
- u_int IOAddrLines;
-} io_req_t;
-
-/* Attributes for RequestIO and ReleaseIO */
-#define IO_SHARED 0x01
-#define IO_FIRST_SHARED 0x02
-#define IO_FORCE_ALIAS_ACCESS 0x04
-#define IO_DATA_PATH_WIDTH 0x18
-#define IO_DATA_PATH_WIDTH_8 0x00
-#define IO_DATA_PATH_WIDTH_16 0x08
-#define IO_DATA_PATH_WIDTH_AUTO 0x10
-
-/* For RequestIRQ and ReleaseIRQ */
-typedef struct irq_req_t {
- u_int Attributes;
- u_int AssignedIRQ;
- u_int IRQInfo1, IRQInfo2;
- void *Handler;
- void *Instance;
-} irq_req_t;
-
-/* Attributes for RequestIRQ and ReleaseIRQ */
-#define IRQ_TYPE 0x03
-#define IRQ_TYPE_EXCLUSIVE 0x00
-#define IRQ_TYPE_TIME 0x01
-#define IRQ_TYPE_DYNAMIC_SHARING 0x02
-#define IRQ_FORCED_PULSE 0x04
-#define IRQ_FIRST_SHARED 0x08
-#define IRQ_HANDLE_PRESENT 0x10
-#define IRQ_PULSE_ALLOCATED 0x100
-
-/* Bits in IRQInfo1 field */
-#define IRQ_MASK 0x0f
-#define IRQ_NMI_ID 0x01
-#define IRQ_IOCK_ID 0x02
-#define IRQ_BERR_ID 0x04
-#define IRQ_VEND_ID 0x08
-#define IRQ_INFO2_VALID 0x10
-#define IRQ_LEVEL_ID 0x20
-#define IRQ_PULSE_ID 0x40
-#define IRQ_SHARE_ID 0x80
-
-typedef struct eventmask_t {
- u_int Attributes;
- u_int EventMask;
-} eventmask_t;
-
-#define CONF_EVENT_MASK_VALID 0x01
-
-/* Configuration registers present */
-#define PRESENT_OPTION 0x001
-#define PRESENT_STATUS 0x002
-#define PRESENT_PIN_REPLACE 0x004
-#define PRESENT_COPY 0x008
-#define PRESENT_EXT_STATUS 0x010
-#define PRESENT_IOBASE_0 0x020
-#define PRESENT_IOBASE_1 0x040
-#define PRESENT_IOBASE_2 0x080
-#define PRESENT_IOBASE_3 0x100
-#define PRESENT_IOSIZE 0x200
-
-/* For GetMemPage, MapMemPage */
-typedef struct memreq_t {
- u_int CardOffset;
- page_t Page;
-} memreq_t;
-
-/* For ModifyWindow */
-typedef struct modwin_t {
- u_int Attributes;
- u_int AccessSpeed;
-} modwin_t;
-
-/* For RequestWindow */
-typedef struct win_req_t {
- u_int Attributes;
- u_long Base;
- u_int Size;
- u_int AccessSpeed;
-} win_req_t;
-
-/* Attributes for RequestWindow */
-#define WIN_ADDR_SPACE 0x0001
-#define WIN_ADDR_SPACE_MEM 0x0000
-#define WIN_ADDR_SPACE_IO 0x0001
-#define WIN_MEMORY_TYPE 0x0002
-#define WIN_MEMORY_TYPE_CM 0x0000
-#define WIN_MEMORY_TYPE_AM 0x0002
-#define WIN_ENABLE 0x0004
-#define WIN_DATA_WIDTH 0x0018
-#define WIN_DATA_WIDTH_8 0x0000
-#define WIN_DATA_WIDTH_16 0x0008
-#define WIN_DATA_WIDTH_32 0x0010
-#define WIN_PAGED 0x0020
-#define WIN_SHARED 0x0040
-#define WIN_FIRST_SHARED 0x0080
-#define WIN_USE_WAIT 0x0100
-#define WIN_STRICT_ALIGN 0x0200
-#define WIN_MAP_BELOW_1MB 0x0400
-#define WIN_PREFETCH 0x0800
-#define WIN_CACHEABLE 0x1000
-#define WIN_BAR_MASK 0xe000
-#define WIN_BAR_SHIFT 13
-
-/* Attributes for RegisterClient */
-#define INFO_MASTER_CLIENT 0x01
-#define INFO_IO_CLIENT 0x02
-#define INFO_MTD_CLIENT 0x04
-#define INFO_MEM_CLIENT 0x08
-#define MAX_NUM_CLIENTS 3
-
-#define INFO_CARD_SHARE 0x10
-#define INFO_CARD_EXCL 0x20
-
-typedef struct cs_status_t {
- u_char Function;
- event_t CardState;
- event_t SocketState;
-} cs_status_t;
-
-typedef struct error_info_t {
- int func;
- int retcode;
-} error_info_t;
-
-/* Special stuff for binding drivers to sockets */
-typedef struct bind_req_t {
- socket_t Socket;
- u_char Function;
- dev_info_t *dev_info;
-} bind_req_t;
-
-/* Flag to bind to all functions */
-#define BIND_FN_ALL 0xff
-
-typedef struct mtd_bind_t {
- socket_t Socket;
- u_int Attributes;
- u_int CardOffset;
- dev_info_t *dev_info;
-} mtd_bind_t;
-
-/* Events */
-#define CS_EVENT_PRI_LOW 0
-#define CS_EVENT_PRI_HIGH 1
-
-#define CS_EVENT_WRITE_PROTECT 0x000001
-#define CS_EVENT_CARD_LOCK 0x000002
-#define CS_EVENT_CARD_INSERTION 0x000004
-#define CS_EVENT_CARD_REMOVAL 0x000008
-#define CS_EVENT_BATTERY_DEAD 0x000010
-#define CS_EVENT_BATTERY_LOW 0x000020
-#define CS_EVENT_READY_CHANGE 0x000040
-#define CS_EVENT_CARD_DETECT 0x000080
-#define CS_EVENT_RESET_REQUEST 0x000100
-#define CS_EVENT_RESET_PHYSICAL 0x000200
-#define CS_EVENT_CARD_RESET 0x000400
-#define CS_EVENT_REGISTRATION_COMPLETE 0x000800
-#define CS_EVENT_RESET_COMPLETE 0x001000
-#define CS_EVENT_PM_SUSPEND 0x002000
-#define CS_EVENT_PM_RESUME 0x004000
-#define CS_EVENT_INSERTION_REQUEST 0x008000
-#define CS_EVENT_EJECTION_REQUEST 0x010000
-#define CS_EVENT_MTD_REQUEST 0x020000
-#define CS_EVENT_ERASE_COMPLETE 0x040000
-#define CS_EVENT_REQUEST_ATTENTION 0x080000
-#define CS_EVENT_CB_DETECT 0x100000
-#define CS_EVENT_3VCARD 0x200000
-#define CS_EVENT_XVCARD 0x400000
-
-/* Return codes */
-#define CS_SUCCESS 0x00
-#define CS_BAD_ADAPTER 0x01
-#define CS_BAD_ATTRIBUTE 0x02
-#define CS_BAD_BASE 0x03
-#define CS_BAD_EDC 0x04
-#define CS_BAD_IRQ 0x06
-#define CS_BAD_OFFSET 0x07
-#define CS_BAD_PAGE 0x08
-#define CS_READ_FAILURE 0x09
-#define CS_BAD_SIZE 0x0a
-#define CS_BAD_SOCKET 0x0b
-#define CS_BAD_TYPE 0x0d
-#define CS_BAD_VCC 0x0e
-#define CS_BAD_VPP 0x0f
-#define CS_BAD_WINDOW 0x11
-#define CS_WRITE_FAILURE 0x12
-#define CS_NO_CARD 0x14
-#define CS_UNSUPPORTED_FUNCTION 0x15
-#define CS_UNSUPPORTED_MODE 0x16
-#define CS_BAD_SPEED 0x17
-#define CS_BUSY 0x18
-#define CS_GENERAL_FAILURE 0x19
-#define CS_WRITE_PROTECTED 0x1a
-#define CS_BAD_ARG_LENGTH 0x1b
-#define CS_BAD_ARGS 0x1c
-#define CS_CONFIGURATION_LOCKED 0x1d
-#define CS_IN_USE 0x1e
-#define CS_NO_MORE_ITEMS 0x1f
-#define CS_OUT_OF_RESOURCE 0x20
-#define CS_BAD_HANDLE 0x21
-
-#define CS_BAD_TUPLE 0x40
-
-#ifdef __KERNEL__
-
-/*
- * Calls to set up low-level "Socket Services" drivers
- */
-
-typedef int (*ss_entry_t)(u_int sock, u_int cmd, void *arg);
-extern int register_ss_entry(int nsock, ss_entry_t entry);
-extern void unregister_ss_entry(ss_entry_t entry);
-
-/*
- * The main Card Services entry point
- */
-
-enum service {
- AccessConfigurationRegister, AddSocketServices,
- AdjustResourceInfo, CheckEraseQueue, CloseMemory, CopyMemory,
- DeregisterClient, DeregisterEraseQueue, GetCardServicesInfo,
- GetClientInfo, GetConfigurationInfo, GetEventMask,
- GetFirstClient, GetFirstPartion, GetFirstRegion, GetFirstTuple,
- GetNextClient, GetNextPartition, GetNextRegion, GetNextTuple,
- GetStatus, GetTupleData, MapLogSocket, MapLogWindow, MapMemPage,
- MapPhySocket, MapPhyWindow, ModifyConfiguration, ModifyWindow,
- OpenMemory, ParseTuple, ReadMemory, RegisterClient,
- RegisterEraseQueue, RegisterMTD, RegisterTimer,
- ReleaseConfiguration, ReleaseExclusive, ReleaseIO, ReleaseIRQ,
- ReleaseSocketMask, ReleaseWindow, ReplaceSocketServices,
- RequestConfiguration, RequestExclusive, RequestIO, RequestIRQ,
- RequestSocketMask, RequestWindow, ResetCard, ReturnSSEntry,
- SetEventMask, SetRegion, ValidateCIS, VendorSpecific,
- WriteMemory, BindDevice, BindMTD, ReportError,
- SuspendCard, ResumeCard, EjectCard, InsertCard, ReplaceCIS,
- GetFirstWindow, GetNextWindow, GetMemPage
-};
-
-#ifdef IN_CARD_SERVICES
-extern int CardServices(int func, void *a1, void *a2, void *a3);
-#else
-extern int CardServices(int func, ...);
-#endif
-
-#ifdef __BEOS__
-#define SS_MODULE_NAME(s) ("busses/pcmcia/" s "/v1")
-#define MTD_MODULE_NAME(s) ("busses/pcmcia/" s "/v1")
-#define CS_CLIENT_MODULE_NAME "bus_managers/pcmcia_cs/client/v1"
-typedef struct cs_client_module_info {
- bus_manager_info binfo;
- int (*_CardServices)(int, ...);
- int (*_MTDHelperEntry)(int, ...);
- void (*_add_timer)(struct timer_list *);
- void (*_del_timer)(struct timer_list *);
-} cs_client_module_info;
-#define CS_SOCKET_MODULE_NAME "bus_managers/pcmcia_cs/socket/v1"
-typedef struct cs_socket_module_info {
- bus_manager_info binfo;
- int (*_register_ss_entry)(int, ss_entry_t);
- void (*_unregister_ss_entry)(ss_entry_t);
- void (*_add_timer)(struct timer_list *);
- void (*_del_timer)(struct timer_list *);
- int (*register_resource)(int, u_long, u_long);
- int (*release_resource)(int, u_long, u_long);
- int (*check_resource)(int, u_long, u_long);
-} cs_socket_module_info;
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_CS_H */
diff --git a/mdk-stage1/pcmcia_/cs_types.h b/mdk-stage1/pcmcia_/cs_types.h
deleted file mode 100644
index a6b56b6bf..000000000
--- a/mdk-stage1/pcmcia_/cs_types.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * cs_types.h 1.19 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CS_TYPES_H
-#define _LINUX_CS_TYPES_H
-
-#ifdef __linux__
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <sys/types.h>
-#endif
-#endif
-
-typedef u_short socket_t;
-typedef u_short ioaddr_t;
-typedef u_int event_t;
-typedef u_char cisdata_t;
-typedef u_short page_t;
-
-struct client_t;
-typedef struct client_t *client_handle_t;
-
-struct window_t;
-typedef struct window_t *window_handle_t;
-
-struct region_t;
-typedef struct region_t *memory_handle_t;
-
-struct eraseq_t;
-typedef struct eraseq_t *eraseq_handle_t;
-
-#ifndef DEV_NAME_LEN
-#define DEV_NAME_LEN 32
-#endif
-
-typedef char dev_info_t[DEV_NAME_LEN];
-
-#endif /* _LINUX_CS_TYPES_H */
diff --git a/mdk-stage1/pcmcia_/driver_ops.h b/mdk-stage1/pcmcia_/driver_ops.h
deleted file mode 100644
index a7223e2c6..000000000
--- a/mdk-stage1/pcmcia_/driver_ops.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * driver_ops.h 1.16 2001/08/24 12:16:13
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_DRIVER_OPS_H
-#define _LINUX_DRIVER_OPS_H
-
-#ifndef DEV_NAME_LEN
-#define DEV_NAME_LEN 32
-#endif
-
-#ifdef __KERNEL__
-
-typedef struct dev_node_t {
- char dev_name[DEV_NAME_LEN];
- u_short major, minor;
- struct dev_node_t *next;
-} dev_node_t;
-
-typedef struct dev_locator_t {
- enum { LOC_ISA, LOC_PCI } bus;
- union {
- struct {
- u_short io_base_1, io_base_2;
- u_long mem_base;
- u_char irq, dma;
- } isa;
- struct {
- u_char bus;
- u_char devfn;
- } pci;
- } b;
-} dev_locator_t;
-
-typedef struct driver_operations {
- char *name;
- dev_node_t *(*attach) (dev_locator_t *loc);
- void (*suspend) (dev_node_t *dev);
- void (*resume) (dev_node_t *dev);
- void (*detach) (dev_node_t *dev);
-} driver_operations;
-
-int register_driver(struct driver_operations *ops);
-void unregister_driver(struct driver_operations *ops);
-
-#ifdef __BEOS__
-#define CB_ENABLER_MODULE_NAME "bus_managers/cb_enabler/v1"
-typedef struct cb_enabler_module_info {
- bus_manager_info binfo;
- int (*register_driver)(struct driver_operations *ops);
- void (*unregister_driver)(struct driver_operations *ops);
-} cb_enabler_module_info;
-#endif /* __BEOS__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_DRIVER_OPS_H */
diff --git a/mdk-stage1/pcmcia_/ds.h b/mdk-stage1/pcmcia_/ds.h
deleted file mode 100644
index d191b09d6..000000000
--- a/mdk-stage1/pcmcia_/ds.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * ds.h 1.57 2001/08/24 12:16:13
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_DS_H
-#define _LINUX_DS_H
-
-#include <pcmcia_/driver_ops.h>
-#include <pcmcia_/bulkmem.h>
-
-typedef struct tuple_parse_t {
- tuple_t tuple;
- cisdata_t data[255];
- cisparse_t parse;
-} tuple_parse_t;
-
-typedef struct win_info_t {
- window_handle_t handle;
- win_req_t window;
- memreq_t map;
-} win_info_t;
-
-typedef struct bind_info_t {
- dev_info_t dev_info;
- u_char function;
- struct dev_link_t *instance;
- char name[DEV_NAME_LEN];
- u_short major, minor;
- void *next;
-} bind_info_t;
-
-typedef struct mtd_info_t {
- dev_info_t dev_info;
- u_int Attributes;
- u_int CardOffset;
-} mtd_info_t;
-
-typedef union ds_ioctl_arg_t {
- servinfo_t servinfo;
- adjust_t adjust;
- config_info_t config;
- tuple_t tuple;
- tuple_parse_t tuple_parse;
- client_req_t client_req;
- cs_status_t status;
- conf_reg_t conf_reg;
- cisinfo_t cisinfo;
- region_info_t region;
- bind_info_t bind_info;
- mtd_info_t mtd_info;
- win_info_t win_info;
- cisdump_t cisdump;
-} ds_ioctl_arg_t;
-
-#define DS_GET_CARD_SERVICES_INFO _IOR ('d', 1, servinfo_t)
-#define DS_ADJUST_RESOURCE_INFO _IOWR('d', 2, adjust_t)
-#define DS_GET_CONFIGURATION_INFO _IOWR('d', 3, config_info_t)
-#define DS_GET_FIRST_TUPLE _IOWR('d', 4, tuple_t)
-#define DS_GET_NEXT_TUPLE _IOWR('d', 5, tuple_t)
-#define DS_GET_TUPLE_DATA _IOWR('d', 6, tuple_parse_t)
-#define DS_PARSE_TUPLE _IOWR('d', 7, tuple_parse_t)
-#define DS_RESET_CARD _IO ('d', 8)
-#define DS_GET_STATUS _IOWR('d', 9, cs_status_t)
-#define DS_ACCESS_CONFIGURATION_REGISTER _IOWR('d', 10, conf_reg_t)
-#define DS_VALIDATE_CIS _IOR ('d', 11, cisinfo_t)
-#define DS_SUSPEND_CARD _IO ('d', 12)
-#define DS_RESUME_CARD _IO ('d', 13)
-#define DS_EJECT_CARD _IO ('d', 14)
-#define DS_INSERT_CARD _IO ('d', 15)
-#define DS_GET_FIRST_REGION _IOWR('d', 16, region_info_t)
-#define DS_GET_NEXT_REGION _IOWR('d', 17, region_info_t)
-#define DS_REPLACE_CIS _IOWR('d', 18, cisdump_t)
-#define DS_GET_FIRST_WINDOW _IOR ('d', 19, win_info_t)
-#define DS_GET_NEXT_WINDOW _IOWR('d', 20, win_info_t)
-#define DS_GET_MEM_PAGE _IOWR('d', 21, win_info_t)
-
-#define DS_BIND_REQUEST _IOWR('d', 60, bind_info_t)
-#define DS_GET_DEVICE_INFO _IOWR('d', 61, bind_info_t)
-#define DS_GET_NEXT_DEVICE _IOWR('d', 62, bind_info_t)
-#define DS_UNBIND_REQUEST _IOW ('d', 63, bind_info_t)
-#define DS_BIND_MTD _IOWR('d', 64, mtd_info_t)
-
-#ifdef __KERNEL__
-
-typedef struct dev_link_t {
- dev_node_t *dev;
- u_int state, open;
- wait_queue_head_t pending;
- struct timer_list release;
- client_handle_t handle;
- io_req_t io;
- irq_req_t irq;
- config_req_t conf;
- window_handle_t win;
- void *priv;
- struct dev_link_t *next;
-} dev_link_t;
-
-/* Flags for device state */
-#define DEV_PRESENT 0x01
-#define DEV_CONFIG 0x02
-#define DEV_STALE_CONFIG 0x04 /* release on close */
-#define DEV_STALE_LINK 0x08 /* detach on release */
-#define DEV_CONFIG_PENDING 0x10
-#define DEV_RELEASE_PENDING 0x20
-#define DEV_SUSPEND 0x40
-#define DEV_BUSY 0x80
-
-#define DEV_OK(l) \
- ((l) && ((l->state & ~DEV_BUSY) == (DEV_CONFIG|DEV_PRESENT)))
-
-int register_pccard_driver(dev_info_t *dev_info,
- dev_link_t *(*attach)(void),
- void (*detach)(dev_link_t *));
-
-int unregister_pccard_driver(dev_info_t *dev_info);
-
-#define register_pcmcia_driver register_pccard_driver
-#define unregister_pcmcia_driver unregister_pccard_driver
-
-#ifdef __BEOS__
-#define DS_MODULE_NAME "bus_managers/pcmcia_ds/v1"
-typedef struct ds_module_info {
- bus_manager_info binfo;
- int (*_register_pccard_driver)(dev_info_t *,
- dev_link_t *(*)(void),
- void (*)(dev_link_t *));
- int (*_unregister_pccard_driver)(dev_info_t *);
- struct driver_info_t **root_driver;
- int *sockets;
- struct socket_info_t **socket_table;
- sem_id *list_sem;
-} ds_module_info;
-#endif /* __BEOS__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_DS_H */
diff --git a/mdk-stage1/pcmcia_/i82365.h b/mdk-stage1/pcmcia_/i82365.h
deleted file mode 100644
index 27ee5837c..000000000
--- a/mdk-stage1/pcmcia_/i82365.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * i82365.h 1.21 2001/08/24 12:15:33
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_I82365_H
-#define _LINUX_I82365_H
-
-/* register definitions for the Intel 82365SL PCMCIA controller */
-
-/* Offsets for PCIC registers */
-#define I365_IDENT 0x00 /* Identification and revision */
-#define I365_STATUS 0x01 /* Interface status */
-#define I365_POWER 0x02 /* Power and RESETDRV control */
-#define I365_INTCTL 0x03 /* Interrupt and general control */
-#define I365_CSC 0x04 /* Card status change */
-#define I365_CSCINT 0x05 /* Card status change interrupt control */
-#define I365_ADDRWIN 0x06 /* Address window enable */
-#define I365_IOCTL 0x07 /* I/O control */
-#define I365_GENCTL 0x16 /* Card detect and general control */
-#define I365_GBLCTL 0x1E /* Global control register */
-
-/* Offsets for I/O and memory window registers */
-#define I365_IO(map) (0x08+((map)<<2))
-#define I365_MEM(map) (0x10+((map)<<3))
-#define I365_W_START 0
-#define I365_W_STOP 2
-#define I365_W_OFF 4
-
-/* Flags for I365_STATUS */
-#define I365_CS_BVD1 0x01
-#define I365_CS_STSCHG 0x01
-#define I365_CS_BVD2 0x02
-#define I365_CS_SPKR 0x02
-#define I365_CS_DETECT 0x0C
-#define I365_CS_WRPROT 0x10
-#define I365_CS_READY 0x20 /* Inverted */
-#define I365_CS_POWERON 0x40
-#define I365_CS_GPI 0x80
-
-/* Flags for I365_POWER */
-#define I365_PWR_OFF 0x00 /* Turn off the socket */
-#define I365_PWR_OUT 0x80 /* Output enable */
-#define I365_PWR_NORESET 0x40 /* Disable RESETDRV on resume */
-#define I365_PWR_AUTO 0x20 /* Auto pwr switch enable */
-#define I365_VCC_MASK 0x18 /* Mask for turning off Vcc */
-/* There are different layouts for B-step and DF-step chips: the B
- step has independent Vpp1/Vpp2 control, and the DF step has only
- Vpp1 control, plus 3V control */
-#define I365_VCC_5V 0x10 /* Vcc = 5.0v */
-#define I365_VCC_3V 0x18 /* Vcc = 3.3v */
-#define I365_VPP2_MASK 0x0c /* Mask for turning off Vpp2 */
-#define I365_VPP2_5V 0x04 /* Vpp2 = 5.0v */
-#define I365_VPP2_12V 0x08 /* Vpp2 = 12.0v */
-#define I365_VPP1_MASK 0x03 /* Mask for turning off Vpp1 */
-#define I365_VPP1_5V 0x01 /* Vpp2 = 5.0v */
-#define I365_VPP1_12V 0x02 /* Vpp2 = 12.0v */
-
-/* Flags for I365_INTCTL */
-#define I365_RING_ENA 0x80
-#define I365_PC_RESET 0x40
-#define I365_PC_IOCARD 0x20
-#define I365_INTR_ENA 0x10
-#define I365_IRQ_MASK 0x0F
-
-/* Flags for I365_CSC and I365_CSCINT*/
-#define I365_CSC_BVD1 0x01
-#define I365_CSC_STSCHG 0x01
-#define I365_CSC_BVD2 0x02
-#define I365_CSC_READY 0x04
-#define I365_CSC_DETECT 0x08
-#define I365_CSC_ANY 0x0F
-#define I365_CSC_GPI 0x10
-
-/* Flags for I365_ADDRWIN */
-#define I365_ADDR_MEMCS16 0x20
-#define I365_ENA_IO(map) (0x40 << (map))
-#define I365_ENA_MEM(map) (0x01 << (map))
-
-/* Flags for I365_IOCTL */
-#define I365_IOCTL_MASK(map) (0x0F << (map<<2))
-#define I365_IOCTL_WAIT(map) (0x08 << (map<<2))
-#define I365_IOCTL_0WS(map) (0x04 << (map<<2))
-#define I365_IOCTL_IOCS16(map) (0x02 << (map<<2))
-#define I365_IOCTL_16BIT(map) (0x01 << (map<<2))
-
-/* Flags for I365_GENCTL */
-#define I365_CTL_16DELAY 0x01
-#define I365_CTL_RESET 0x02
-#define I365_CTL_GPI_ENA 0x04
-#define I365_CTL_GPI_CTL 0x08
-#define I365_CTL_RESUME 0x10
-#define I365_CTL_SW_IRQ 0x20
-
-/* Flags for I365_GBLCTL */
-#define I365_GBL_PWRDOWN 0x01
-#define I365_GBL_CSC_LEV 0x02
-#define I365_GBL_WRBACK 0x04
-#define I365_GBL_IRQ_0_LEV 0x08
-#define I365_GBL_IRQ_1_LEV 0x10
-
-/* Flags for memory window registers */
-#define I365_MEM_16BIT 0x8000 /* In memory start high byte */
-#define I365_MEM_0WS 0x4000
-#define I365_MEM_WS1 0x8000 /* In memory stop high byte */
-#define I365_MEM_WS0 0x4000
-#define I365_MEM_WRPROT 0x8000 /* In offset high byte */
-#define I365_MEM_REG 0x4000
-
-#define I365_REG(slot, reg) (((slot) << 6) | (reg))
-
-/* Default ISA interrupt mask */
-#define I365_ISA_IRQ_MASK 0xdeb8 /* irq's 3-5,7,9-12,14,15 */
-
-/* Device ID's for PCI-to-PCMCIA bridges */
-
-#ifndef PCI_VENDOR_ID_INTEL
-#define PCI_VENDOR_ID_INTEL 0x8086
-#endif
-#ifndef PCI_DEVICE_ID_INTEL_82092AA_0
-#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221
-#endif
-#ifndef PCI_VENDOR_ID_OMEGA
-#define PCI_VENDOR_ID_OMEGA 0x119b
-#endif
-#ifndef PCI_DEVICE_ID_OMEGA_82C092G
-#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221
-#endif
-
-#endif /* _LINUX_I82365_H */
diff --git a/mdk-stage1/pcmcia_/lex_config.c b/mdk-stage1/pcmcia_/lex_config.c
deleted file mode 100644
index 2f990618d..000000000
--- a/mdk-stage1/pcmcia_/lex_config.c
+++ /dev/null
@@ -1,2053 +0,0 @@
-/* A lexical scanner generated by flex */
-
-/* Scanner skeleton version:
- * $Header$
- */
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-
-#include <stdio.h>
-
-
-/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
-#ifdef c_plusplus
-#ifndef __cplusplus
-#define __cplusplus
-#endif
-#endif
-
-
-#ifdef __cplusplus
-
-#include <stdlib.h>
-#include <unistd.h>
-
-/* Use prototypes in function declarations. */
-#define YY_USE_PROTOS
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else /* ! __cplusplus */
-
-#if __STDC__
-
-#define YY_USE_PROTOS
-#define YY_USE_CONST
-
-#endif /* __STDC__ */
-#endif /* ! __cplusplus */
-
-#ifdef __TURBOC__
- #pragma warn -rch
- #pragma warn -use
-#include <io.h>
-#include <stdlib.h>
-#define YY_USE_CONST
-#define YY_USE_PROTOS
-#endif
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-
-#ifdef YY_USE_PROTOS
-#define YY_PROTO(proto) proto
-#else
-#define YY_PROTO(proto) ()
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index. If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition. This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN yy_start = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state. The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START ((yy_start - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE yyrestart( yyin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#define YY_BUF_SIZE 16384
-
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-
-extern int yyleng;
-extern FILE *yyin, *yyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
-/* The funky do-while in the following #define is used to turn the definition
- * int a single C statement (which needs a semi-colon terminator). This
- * avoids problems with code like:
- *
- * if ( condition_holds )
- * yyless( 5 );
- * else
- * do_something_else();
- *
- * Prior to using the do-while the compiler would get upset at the
- * "else" because it interpreted the "if" statement as being all
- * done when it reached the ';' after the yyless() call.
- */
-
-/* Return all but the first 'n' matched characters back to the input stream. */
-
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- *yy_cp = yy_hold_char; \
- YY_RESTORE_YY_MORE_OFFSET \
- yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up yytext again */ \
- } \
- while ( 0 )
-
-//mdk-stage1// #define unput(c) yyunput( c, yytext_ptr )
-
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-typedef unsigned int yy_size_t;
-
-
-struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- int yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
-
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
-
- int yy_buffer_status;
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via yyrestart()), so that the user can continue scanning by
- * just pointing yyin at a new input file.
- */
-#define YY_BUFFER_EOF_PENDING 2
- };
-
-static YY_BUFFER_STATE yy_current_buffer = 0;
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- */
-#define YY_CURRENT_BUFFER yy_current_buffer
-
-
-/* yy_hold_char holds the character lost when yytext is formed. */
-static char yy_hold_char;
-
-static int yy_n_chars; /* number of characters read into yy_ch_buf */
-
-
-int yyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 1; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
-
-/* Flag which is used to allow yywrap()'s to do buffer switches
- * instead of setting up a fresh yyin. A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void yyrestart YY_PROTO(( FILE *input_file ));
-
-void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer ));
-void yy_load_buffer_state YY_PROTO(( void ));
-YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size ));
-void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b ));
-void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
-void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b ));
-#define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer )
-
-YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size ));
-YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str ));
-YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len ));
-
-static void *yy_flex_alloc YY_PROTO(( yy_size_t ));
-static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t ));
-static void yy_flex_free YY_PROTO(( void * ));
-
-#define yy_new_buffer yy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
- { \
- if ( ! yy_current_buffer ) \
- yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
- yy_current_buffer->yy_is_interactive = is_interactive; \
- }
-
-#define yy_set_bol(at_bol) \
- { \
- if ( ! yy_current_buffer ) \
- yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
- yy_current_buffer->yy_at_bol = at_bol; \
- }
-
-#define YY_AT_BOL() (yy_current_buffer->yy_at_bol)
-
-typedef unsigned char YY_CHAR;
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
-typedef int yy_state_type;
-extern char *yytext;
-#define yytext_ptr yytext
-
-static yy_state_type yy_get_previous_state YY_PROTO(( void ));
-static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state ));
-static int yy_get_next_buffer YY_PROTO(( void ));
-static void yy_fatal_error YY_PROTO(( yyconst char msg[] ));
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up yytext.
- */
-#define YY_DO_BEFORE_ACTION \
- yytext_ptr = yy_bp; \
- yyleng = (int) (yy_cp - yy_bp); \
- yy_hold_char = *yy_cp; \
- *yy_cp = '\0'; \
- yy_c_buf_p = yy_cp;
-
-#define YY_NUM_RULES 45
-#define YY_END_OF_BUFFER 46
-static yyconst short int yy_accept[247] =
- { 0,
- 5, 5, 2, 2, 46, 44, 5, 4, 5, 44,
- 6, 41, 41, 44, 44, 44, 44, 44, 44, 44,
- 44, 44, 44, 44, 44, 44, 44, 44, 44, 3,
- 2, 45, 5, 5, 6, 0, 43, 0, 6, 41,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 30, 0,
- 0, 0, 3, 2, 0, 43, 0, 42, 0, 0,
- 0, 0, 9, 0, 0, 0, 0, 0, 0, 0,
- 0, 18, 0, 0, 0, 0, 23, 0, 0, 0,
-
- 0, 26, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 8, 10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 25,
- 0, 27, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 11, 0, 0, 14, 0, 0, 0, 0,
- 19, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 31, 0, 0, 0, 0, 0, 13, 0,
- 0, 0, 0, 20, 21, 22, 0, 0, 0, 28,
- 0, 0, 0, 1, 0, 0, 0, 0, 12, 15,
- 0, 0, 17, 0, 0, 0, 0, 29, 0, 0,
-
- 32, 0, 0, 0, 0, 16, 0, 0, 0, 0,
- 0, 0, 0, 39, 7, 0, 0, 24, 0, 0,
- 0, 0, 0, 36, 0, 0, 0, 0, 0, 0,
- 33, 0, 0, 0, 34, 0, 0, 0, 40, 0,
- 0, 35, 37, 0, 38, 0
- } ;
-
-static yyconst int yy_ec[256] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 4, 1, 5, 6, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 7, 8, 8,
- 8, 8, 8, 8, 8, 8, 8, 1, 6, 1,
- 1, 1, 1, 1, 9, 9, 9, 9, 9, 9,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 10, 1, 1, 11, 1, 12, 13, 14, 15,
-
- 16, 17, 18, 1, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
- 35, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1
- } ;
-
-static yyconst int yy_meta[36] =
- { 0,
- 1, 2, 3, 2, 1, 1, 4, 4, 4, 1,
- 1, 4, 4, 4, 4, 4, 4, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1
- } ;
-
-static yyconst short int yy_base[253] =
- { 0,
- 0, 0, 34, 37, 293, 294, 40, 294, 41, 41,
- 0, 41, 45, 31, 273, 42, 40, 257, 38, 34,
- 274, 47, 273, 262, 53, 271, 57, 35, 60, 0,
- 79, 294, 82, 83, 0, 83, 294, 87, 0, 87,
- 0, 263, 260, 260, 255, 253, 269, 74, 245, 265,
- 244, 253, 262, 248, 259, 249, 249, 256, 255, 80,
- 239, 240, 248, 238, 80, 236, 236, 232, 294, 236,
- 233, 245, 0, 97, 95, 97, 108, 0, 230, 234,
- 242, 241, 294, 226, 242, 234, 226, 229, 234, 235,
- 226, 294, 231, 229, 220, 213, 294, 228, 209, 212,
-
- 228, 294, 209, 219, 221, 217, 216, 206, 211, 203,
- 215, 219, 194, 294, 294, 199, 196, 212, 209, 193,
- 208, 192, 190, 206, 200, 190, 195, 187, 190, 294,
- 192, 294, 188, 184, 200, 198, 195, 192, 188, 181,
- 191, 181, 294, 181, 186, 294, 186, 189, 180, 183,
- 294, 182, 161, 179, 183, 165, 170, 167, 158, 177,
- 166, 171, 294, 161, 174, 172, 158, 152, 294, 165,
- 165, 154, 162, 294, 166, 294, 153, 154, 158, 294,
- 157, 157, 160, 294, 146, 157, 140, 136, 294, 294,
- 147, 141, 294, 150, 133, 151, 139, 294, 148, 133,
-
- 294, 143, 142, 127, 126, 294, 142, 138, 140, 140,
- 124, 124, 136, 294, 294, 126, 118, 294, 130, 118,
- 113, 114, 115, 294, 125, 127, 108, 116, 99, 87,
- 294, 90, 87, 86, 294, 96, 78, 74, 294, 75,
- 64, 294, 294, 46, 294, 294, 118, 122, 126, 130,
- 134, 64
- } ;
-
-static yyconst short int yy_def[253] =
- { 0,
- 246, 1, 247, 247, 246, 246, 246, 246, 246, 248,
- 249, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 250,
- 246, 246, 246, 246, 249, 248, 246, 251, 249, 246,
- 252, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 250, 246, 248, 248, 251, 252, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
-
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
-
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 0, 246, 246, 246, 246,
- 246, 246
- } ;
-
-static yyconst short int yy_nxt[330] =
- { 0,
- 6, 7, 8, 9, 10, 11, 12, 13, 6, 6,
- 6, 14, 15, 16, 17, 18, 19, 6, 20, 21,
- 6, 6, 22, 23, 24, 25, 6, 26, 27, 28,
- 6, 29, 6, 6, 6, 31, 32, 31, 31, 32,
- 31, 33, 33, 33, 34, 37, 35, 40, 40, 42,
- 38, 40, 40, 45, 43, 48, 51, 53, 56, 69,
- 46, 54, 57, 47, 62, 70, 63, 78, 52, 49,
- 66, 58, 67, 245, 41, 71, 59, 64, 72, 244,
- 74, 68, 74, 33, 33, 33, 34, 37, 35, 36,
- 85, 76, 38, 40, 40, 98, 77, 104, 74, 37,
-
- 74, 37, 243, 242, 38, 86, 38, 241, 105, 99,
- 36, 240, 76, 239, 238, 237, 236, 77, 30, 30,
- 30, 30, 36, 36, 36, 36, 39, 39, 235, 39,
- 73, 234, 233, 73, 75, 75, 75, 75, 232, 231,
- 230, 229, 228, 227, 226, 225, 224, 223, 222, 221,
- 220, 219, 218, 217, 216, 215, 214, 213, 212, 211,
- 210, 209, 208, 207, 206, 205, 204, 203, 202, 201,
- 200, 199, 198, 197, 196, 195, 194, 193, 192, 191,
- 190, 189, 188, 187, 186, 185, 184, 183, 182, 181,
- 180, 179, 178, 177, 176, 175, 174, 173, 172, 171,
-
- 170, 169, 168, 167, 166, 165, 164, 163, 162, 161,
- 160, 159, 158, 157, 156, 155, 154, 153, 152, 151,
- 150, 149, 148, 147, 146, 145, 144, 143, 142, 141,
- 140, 139, 138, 137, 136, 135, 134, 133, 132, 131,
- 130, 129, 128, 127, 126, 125, 124, 123, 122, 121,
- 120, 119, 118, 117, 116, 115, 114, 113, 112, 111,
- 110, 109, 108, 107, 106, 103, 102, 101, 100, 97,
- 96, 95, 94, 93, 92, 91, 90, 89, 88, 87,
- 84, 83, 82, 81, 80, 79, 65, 61, 60, 55,
- 50, 44, 246, 5, 246, 246, 246, 246, 246, 246,
-
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246
- } ;
-
-static yyconst short int yy_chk[330] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 3, 3, 3, 4, 4,
- 4, 7, 9, 7, 9, 10, 9, 12, 12, 14,
- 10, 13, 13, 16, 14, 17, 19, 20, 22, 28,
- 16, 20, 22, 16, 25, 28, 25, 252, 19, 17,
- 27, 22, 27, 244, 12, 29, 22, 25, 29, 241,
- 31, 27, 31, 33, 34, 33, 34, 36, 34, 38,
- 48, 38, 36, 40, 40, 60, 38, 65, 74, 75,
-
- 74, 76, 240, 238, 75, 48, 76, 237, 65, 60,
- 77, 236, 77, 234, 233, 232, 230, 77, 247, 247,
- 247, 247, 248, 248, 248, 248, 249, 249, 229, 249,
- 250, 228, 227, 250, 251, 251, 251, 251, 226, 225,
- 223, 222, 221, 220, 219, 217, 216, 213, 212, 211,
- 210, 209, 208, 207, 205, 204, 203, 202, 200, 199,
- 197, 196, 195, 194, 192, 191, 188, 187, 186, 185,
- 183, 182, 181, 179, 178, 177, 175, 173, 172, 171,
- 170, 168, 167, 166, 165, 164, 162, 161, 160, 159,
- 158, 157, 156, 155, 154, 153, 152, 150, 149, 148,
-
- 147, 145, 144, 142, 141, 140, 139, 138, 137, 136,
- 135, 134, 133, 131, 129, 128, 127, 126, 125, 124,
- 123, 122, 121, 120, 119, 118, 117, 116, 113, 112,
- 111, 110, 109, 108, 107, 106, 105, 104, 103, 101,
- 100, 99, 98, 96, 95, 94, 93, 91, 90, 89,
- 88, 87, 86, 85, 84, 82, 81, 80, 79, 72,
- 71, 70, 68, 67, 66, 64, 63, 62, 61, 59,
- 58, 57, 56, 55, 54, 53, 52, 51, 50, 49,
- 47, 46, 45, 44, 43, 42, 26, 24, 23, 21,
- 18, 15, 5, 246, 246, 246, 246, 246, 246, 246,
-
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246, 246,
- 246, 246, 246, 246, 246, 246, 246, 246, 246
- } ;
-
-static yy_state_type yy_last_accepting_state;
-static char *yy_last_accepting_cpos;
-
-/* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *yytext;
-#line 1 "lex_config.l"
-#define INITIAL 0
-/* Special state for handling include files */
-#define src 1
-
-#line 5 "lex_config.l"
-/*
- * lex_config.l 1.40 2001/08/24 12:21:25
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#undef src
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <syslog.h>
-#include <glob.h>
-#define src 1
-
-#include <pcmcia_/cs_types.h>
-#include <pcmcia_/cs.h>
-
-#include "yacc_config.h"
-
-/* For assembling nice error messages */
-char *current_file;
-int current_lineno;
-
-static int lex_number(char *s);
-static int lex_string(char *s);
-static void do_source(char *fn);
-static int do_eof(void);
-
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int yywrap YY_PROTO(( void ));
-#else
-extern int yywrap YY_PROTO(( void ));
-#endif
-#endif
-
-#ifndef YY_NO_UNPUT
-//mdk-stage1// static void yyunput YY_PROTO(( int c, char *buf_ptr ));
-#endif
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen YY_PROTO(( yyconst char * ));
-#endif
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
-static int yyinput YY_PROTO(( void ));
-#else
-static int input YY_PROTO(( void ));
-#endif
-#endif
-
-#if YY_STACK_USED
-static int yy_start_stack_ptr = 0;
-static int yy_start_stack_depth = 0;
-static int *yy_start_stack = 0;
-#ifndef YY_NO_PUSH_STATE
-static void yy_push_state YY_PROTO(( int new_state ));
-#endif
-#ifndef YY_NO_POP_STATE
-static void yy_pop_state YY_PROTO(( void ));
-#endif
-#ifndef YY_NO_TOP_STATE
-static int yy_top_state YY_PROTO(( void ));
-#endif
-
-#else
-#define YY_NO_PUSH_STATE 1
-#define YY_NO_POP_STATE 1
-#define YY_NO_TOP_STATE 1
-#endif
-
-#ifdef YY_MALLOC_DECL
-YY_MALLOC_DECL
-#else
-#if __STDC__
-#ifndef __cplusplus
-#include <stdlib.h>
-#endif
-#else
-/* Just try to get by without declaring the routines. This will fail
- * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
- * or sizeof(void*) != sizeof(int).
- */
-#endif
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
-#endif
-
-/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
- if ( yy_current_buffer->yy_is_interactive ) \
- { \
- int c = '*', n; \
- for ( n = 0; n < max_size && \
- (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } \
- else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
- && ferror( yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" );
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL int yylex YY_PROTO(( void ))
-#endif
-
-/* Code executed at the beginning of each rule, after yytext and yyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
- YY_USER_ACTION
-
-YY_DECL
- {
- register yy_state_type yy_current_state;
- register char *yy_cp = NULL, *yy_bp = NULL;
- register int yy_act;
-
-#line 63 "lex_config.l"
-
-
-
- if ( yy_init )
- {
- yy_init = 0;
-
-#ifdef YY_USER_INIT
- YY_USER_INIT;
-#endif
-
- if ( ! yy_start )
- yy_start = 1; /* first start state */
-
- if ( ! yyin )
- yyin = stdin;
-
- if ( ! yyout )
- yyout = stdout;
-
- if ( ! yy_current_buffer )
- yy_current_buffer =
- yy_create_buffer( yyin, YY_BUF_SIZE );
-
- yy_load_buffer_state();
- }
-
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = yy_c_buf_p;
-
- /* Support of yytext. */
- *yy_cp = yy_hold_char;
-
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
-
- yy_current_state = yy_start;
-yy_match:
- do
- {
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
- if ( yy_accept[yy_current_state] )
- {
- yy_last_accepting_state = yy_current_state;
- yy_last_accepting_cpos = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 247 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- ++yy_cp;
- }
- while ( yy_base[yy_current_state] != 294 );
-
-yy_find_action:
- yy_act = yy_accept[yy_current_state];
- if ( yy_act == 0 )
- { /* have to back up */
- yy_cp = yy_last_accepting_cpos;
- yy_current_state = yy_last_accepting_state;
- yy_act = yy_accept[yy_current_state];
- }
-
- YY_DO_BEFORE_ACTION;
-
-
-do_action: /* This label is used only to access EOF actions. */
-
-
- switch ( yy_act )
- { /* beginning of action switch */
- case 0: /* must back up */
- /* undo the effects of YY_DO_BEFORE_ACTION */
- *yy_cp = yy_hold_char;
- yy_cp = yy_last_accepting_cpos;
- yy_current_state = yy_last_accepting_state;
- goto yy_find_action;
-
-case 1:
-YY_RULE_SETUP
-#line 65 "lex_config.l"
-BEGIN(src);
- YY_BREAK
-case 2:
-YY_RULE_SETUP
-#line 66 "lex_config.l"
-/* skip */ ;
- YY_BREAK
-case 3:
-YY_RULE_SETUP
-#line 67 "lex_config.l"
-do_source(yytext); BEGIN(INITIAL);
- YY_BREAK
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(src):
-#line 68 "lex_config.l"
-if (do_eof()) yyterminate();
- YY_BREAK
-case 4:
-YY_RULE_SETUP
-#line 70 "lex_config.l"
-current_lineno++;
- YY_BREAK
-case 5:
-YY_RULE_SETUP
-#line 71 "lex_config.l"
-/* skip */ ;
- YY_BREAK
-case 6:
-YY_RULE_SETUP
-#line 72 "lex_config.l"
-/* skip */ ;
- YY_BREAK
-case 7:
-YY_RULE_SETUP
-#line 74 "lex_config.l"
-return ANONYMOUS;
- YY_BREAK
-case 8:
-YY_RULE_SETUP
-#line 75 "lex_config.l"
-return BIND;
- YY_BREAK
-case 9:
-YY_RULE_SETUP
-#line 76 "lex_config.l"
-return CIS;
- YY_BREAK
-case 10:
-YY_RULE_SETUP
-#line 77 "lex_config.l"
-return CARD;
- YY_BREAK
-case 11:
-YY_RULE_SETUP
-#line 78 "lex_config.l"
-return CLASS;
- YY_BREAK
-case 12:
-YY_RULE_SETUP
-#line 79 "lex_config.l"
-return DEFAULT;
- YY_BREAK
-case 13:
-YY_RULE_SETUP
-#line 80 "lex_config.l"
-return DEVICE;
- YY_BREAK
-case 14:
-YY_RULE_SETUP
-#line 81 "lex_config.l"
-return DTYPE;
- YY_BREAK
-case 15:
-YY_RULE_SETUP
-#line 82 "lex_config.l"
-return EXCLUDE;
- YY_BREAK
-case 16:
-YY_RULE_SETUP
-#line 83 "lex_config.l"
-return FUNCTION;
- YY_BREAK
-case 17:
-YY_RULE_SETUP
-#line 84 "lex_config.l"
-return INCLUDE;
- YY_BREAK
-case 18:
-YY_RULE_SETUP
-#line 85 "lex_config.l"
-return IRQ_NO;
- YY_BREAK
-case 19:
-YY_RULE_SETUP
-#line 86 "lex_config.l"
-return JEDEC;
- YY_BREAK
-case 20:
-YY_RULE_SETUP
-#line 87 "lex_config.l"
-return MANFID;
- YY_BREAK
-case 21:
-YY_RULE_SETUP
-#line 88 "lex_config.l"
-return MEMORY;
- YY_BREAK
-case 22:
-YY_RULE_SETUP
-#line 89 "lex_config.l"
-return MODULE;
- YY_BREAK
-case 23:
-YY_RULE_SETUP
-#line 90 "lex_config.l"
-return MTD;
- YY_BREAK
-case 24:
-YY_RULE_SETUP
-#line 91 "lex_config.l"
-return NEEDS_MTD;
- YY_BREAK
-case 25:
-YY_RULE_SETUP
-#line 92 "lex_config.l"
-return OPTS;
- YY_BREAK
-case 26:
-YY_RULE_SETUP
-#line 93 "lex_config.l"
-return PCI;
- YY_BREAK
-case 27:
-YY_RULE_SETUP
-#line 94 "lex_config.l"
-return PORT;
- YY_BREAK
-case 28:
-YY_RULE_SETUP
-#line 95 "lex_config.l"
-return REGION;
- YY_BREAK
-case 29:
-YY_RULE_SETUP
-#line 96 "lex_config.l"
-return RESERVE;
- YY_BREAK
-case 30:
-YY_RULE_SETUP
-#line 97 "lex_config.l"
-return TO;
- YY_BREAK
-case 31:
-YY_RULE_SETUP
-#line 98 "lex_config.l"
-return TUPLE;
- YY_BREAK
-case 32:
-YY_RULE_SETUP
-#line 99 "lex_config.l"
-return VERSION;
- YY_BREAK
-case 33:
-YY_RULE_SETUP
-#line 101 "lex_config.l"
-return lex_number("1");
- YY_BREAK
-case 34:
-YY_RULE_SETUP
-#line 102 "lex_config.l"
-return lex_number("2");
- YY_BREAK
-case 35:
-YY_RULE_SETUP
-#line 103 "lex_config.l"
-return lex_number("3");
- YY_BREAK
-case 36:
-YY_RULE_SETUP
-#line 104 "lex_config.l"
-return lex_number("4");
- YY_BREAK
-case 37:
-YY_RULE_SETUP
-#line 105 "lex_config.l"
-return lex_number("5");
- YY_BREAK
-case 38:
-YY_RULE_SETUP
-#line 106 "lex_config.l"
-return lex_number("6");
- YY_BREAK
-case 39:
-YY_RULE_SETUP
-#line 107 "lex_config.l"
-return lex_number("7");
- YY_BREAK
-case 40:
-YY_RULE_SETUP
-#line 108 "lex_config.l"
-return lex_number("8");
- YY_BREAK
-case 41:
-YY_RULE_SETUP
-#line 110 "lex_config.l"
-return lex_number(yytext);
- YY_BREAK
-case 42:
-YY_RULE_SETUP
-#line 112 "lex_config.l"
-return lex_number(yytext);
- YY_BREAK
-case 43:
-YY_RULE_SETUP
-#line 114 "lex_config.l"
-return lex_string(yytext);
- YY_BREAK
-case 44:
-YY_RULE_SETUP
-#line 116 "lex_config.l"
-return yytext[0];
- YY_BREAK
-case 45:
-YY_RULE_SETUP
-#line 118 "lex_config.l"
-ECHO;
- YY_BREAK
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = yy_hold_char;
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed yyin at a new source and called
- * yylex(). If so, then we have to assure
- * consistency between yy_current_buffer and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- yy_n_chars = yy_current_buffer->yy_n_chars;
- yy_current_buffer->yy_input_file = yyin;
- yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state();
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = yytext_ptr + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++yy_c_buf_p;
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = yy_c_buf_p;
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer() )
- {
- case EOB_ACT_END_OF_FILE:
- {
- yy_did_buffer_switch_on_eof = 0;
-
- if ( yywrap() )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * yytext, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- yy_c_buf_p = yytext_ptr + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! yy_did_buffer_switch_on_eof )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- yy_c_buf_p =
- yytext_ptr + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state();
-
- yy_cp = yy_c_buf_p;
- yy_bp = yytext_ptr + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- yy_c_buf_p =
- &yy_current_buffer->yy_ch_buf[yy_n_chars];
-
- yy_current_state = yy_get_previous_state();
-
- yy_cp = yy_c_buf_p;
- yy_bp = yytext_ptr + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
- } /* end of yylex */
-
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
- */
-
-static int yy_get_next_buffer()
- {
- register char *dest = yy_current_buffer->yy_ch_buf;
- register char *source = yytext_ptr;
- register int number_to_move, i;
- int ret_val;
-
- if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( yy_current_buffer->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- yy_current_buffer->yy_n_chars = yy_n_chars = 0;
-
- else
- {
- int num_to_read =
- yy_current_buffer->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-#ifdef YY_USES_REJECT
- YY_FATAL_ERROR(
-"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
-#else
-
- /* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = yy_current_buffer;
-
- int yy_c_buf_p_offset =
- (int) (yy_c_buf_p - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
- int new_size = b->yy_buf_size * 2;
-
- if ( new_size <= 0 )
- b->yy_buf_size += b->yy_buf_size / 8;
- else
- b->yy_buf_size *= 2;
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
- yy_flex_realloc( (void *) b->yy_ch_buf,
- b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
-
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
- yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];
-
- num_to_read = yy_current_buffer->yy_buf_size -
- number_to_move - 1;
-#endif
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
- yy_n_chars, num_to_read );
-
- yy_current_buffer->yy_n_chars = yy_n_chars;
- }
-
- if ( yy_n_chars == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- yyrestart( yyin );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- yy_current_buffer->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- yy_n_chars += number_to_move;
- yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
- yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
-
- yytext_ptr = &yy_current_buffer->yy_ch_buf[0];
-
- return ret_val;
- }
-
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
-static yy_state_type yy_get_previous_state()
- {
- register yy_state_type yy_current_state;
- register char *yy_cp;
-
- yy_current_state = yy_start;
-
- for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
- {
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
- if ( yy_accept[yy_current_state] )
- {
- yy_last_accepting_state = yy_current_state;
- yy_last_accepting_cpos = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 247 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- }
-
- return yy_current_state;
- }
-
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- * next_state = yy_try_NUL_trans( current_state );
- */
-
-#ifdef YY_USE_PROTOS
-static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state )
-#else
-static yy_state_type yy_try_NUL_trans( yy_current_state )
-yy_state_type yy_current_state;
-#endif
- {
- register int yy_is_jam;
- register char *yy_cp = yy_c_buf_p;
-
- register YY_CHAR yy_c = 1;
- if ( yy_accept[yy_current_state] )
- {
- yy_last_accepting_state = yy_current_state;
- yy_last_accepting_cpos = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 247 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- yy_is_jam = (yy_current_state == 246);
-
- return yy_is_jam ? 0 : yy_current_state;
- }
-
-
-//mdk-stage1// #ifndef YY_NO_UNPUT
-//mdk-stage1// #ifdef YY_USE_PROTOS
-//mdk-stage1// static void yyunput( int c, register char *yy_bp )
-//mdk-stage1// #else
-//mdk-stage1// static void yyunput( c, yy_bp )
-//mdk-stage1// int c;
-//mdk-stage1// register char *yy_bp;
-//mdk-stage1// #endif
-//mdk-stage1// {
-//mdk-stage1// register char *yy_cp = yy_c_buf_p;
-//mdk-stage1//
-//mdk-stage1// /* undo effects of setting up yytext */
-//mdk-stage1// *yy_cp = yy_hold_char;
-//mdk-stage1//
-//mdk-stage1// if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-//mdk-stage1// { /* need to shift things up to make room */
-//mdk-stage1// /* +2 for EOB chars. */
-//mdk-stage1// register int number_to_move = yy_n_chars + 2;
-//mdk-stage1// register char *dest = &yy_current_buffer->yy_ch_buf[
-//mdk-stage1// yy_current_buffer->yy_buf_size + 2];
-//mdk-stage1// register char *source =
-//mdk-stage1// &yy_current_buffer->yy_ch_buf[number_to_move];
-//mdk-stage1//
-//mdk-stage1// while ( source > yy_current_buffer->yy_ch_buf )
-//mdk-stage1// *--dest = *--source;
-//mdk-stage1//
-//mdk-stage1// yy_cp += (int) (dest - source);
-//mdk-stage1// yy_bp += (int) (dest - source);
-//mdk-stage1// yy_current_buffer->yy_n_chars =
-//mdk-stage1// yy_n_chars = yy_current_buffer->yy_buf_size;
-//mdk-stage1//
-//mdk-stage1// if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-//mdk-stage1// YY_FATAL_ERROR( "flex scanner push-back overflow" );
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// *--yy_cp = (char) c;
-//mdk-stage1//
-//mdk-stage1//
-//mdk-stage1// yytext_ptr = yy_bp;
-//mdk-stage1// yy_hold_char = *yy_cp;
-//mdk-stage1// yy_c_buf_p = yy_cp;
-//mdk-stage1// }
-//mdk-stage1// #endif /* ifndef YY_NO_UNPUT */
-
-
-#ifdef __cplusplus
-static int yyinput()
-#else
-static int input()
-#endif
- {
- int c;
-
- *yy_c_buf_p = yy_hold_char;
-
- if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
- /* This was really a NUL. */
- *yy_c_buf_p = '\0';
-
- else
- { /* need more input */
- int offset = yy_c_buf_p - yytext_ptr;
- ++yy_c_buf_p;
-
- switch ( yy_get_next_buffer() )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- yyrestart( yyin );
-
- /* fall through */
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( yywrap() )
- return EOF;
-
- if ( ! yy_did_buffer_switch_on_eof )
- YY_NEW_FILE;
-#ifdef __cplusplus
- return yyinput();
-#else
- return input();
-#endif
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- yy_c_buf_p = yytext_ptr + offset;
- break;
- }
- }
- }
-
- c = *(unsigned char *) yy_c_buf_p; /* cast for 8-bit char's */
- *yy_c_buf_p = '\0'; /* preserve yytext */
- yy_hold_char = *++yy_c_buf_p;
-
-
- return c;
- }
-
-
-#ifdef YY_USE_PROTOS
-void yyrestart( FILE *input_file )
-#else
-void yyrestart( input_file )
-FILE *input_file;
-#endif
- {
- if ( ! yy_current_buffer )
- yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE );
-
- yy_init_buffer( yy_current_buffer, input_file );
- yy_load_buffer_state();
- }
-
-
-#ifdef YY_USE_PROTOS
-void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
-#else
-void yy_switch_to_buffer( new_buffer )
-YY_BUFFER_STATE new_buffer;
-#endif
- {
- if ( yy_current_buffer == new_buffer )
- return;
-
- if ( yy_current_buffer )
- {
- /* Flush out information for old buffer. */
- *yy_c_buf_p = yy_hold_char;
- yy_current_buffer->yy_buf_pos = yy_c_buf_p;
- yy_current_buffer->yy_n_chars = yy_n_chars;
- }
-
- yy_current_buffer = new_buffer;
- yy_load_buffer_state();
-
- /* We don't actually know whether we did this switch during
- * EOF (yywrap()) processing, but the only time this flag
- * is looked at is after yywrap() is called, so it's safe
- * to go ahead and always set it.
- */
- yy_did_buffer_switch_on_eof = 1;
- }
-
-
-#ifdef YY_USE_PROTOS
-void yy_load_buffer_state( void )
-#else
-void yy_load_buffer_state()
-#endif
- {
- yy_n_chars = yy_current_buffer->yy_n_chars;
- yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
- yyin = yy_current_buffer->yy_input_file;
- yy_hold_char = *yy_c_buf_p;
- }
-
-
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
-#else
-YY_BUFFER_STATE yy_create_buffer( file, size )
-FILE *file;
-int size;
-#endif
- {
- YY_BUFFER_STATE b;
-
- b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_buf_size = size;
-
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_is_our_buffer = 1;
-
- yy_init_buffer( b, file );
-
- return b;
- }
-
-
-#ifdef YY_USE_PROTOS
-void yy_delete_buffer( YY_BUFFER_STATE b )
-#else
-void yy_delete_buffer( b )
-YY_BUFFER_STATE b;
-#endif
- {
- if ( ! b )
- return;
-
- if ( b == yy_current_buffer )
- yy_current_buffer = (YY_BUFFER_STATE) 0;
-
- if ( b->yy_is_our_buffer )
- yy_flex_free( (void *) b->yy_ch_buf );
-
- yy_flex_free( (void *) b );
- }
-
-
-#ifndef YY_ALWAYS_INTERACTIVE
-#ifndef YY_NEVER_INTERACTIVE
-extern int isatty YY_PROTO(( int ));
-#endif
-#endif
-
-#ifdef YY_USE_PROTOS
-void yy_init_buffer( YY_BUFFER_STATE b, FILE *file )
-#else
-void yy_init_buffer( b, file )
-YY_BUFFER_STATE b;
-FILE *file;
-#endif
-
-
- {
- yy_flush_buffer( b );
-
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
-
-#if YY_ALWAYS_INTERACTIVE
- b->yy_is_interactive = 1;
-#else
-#if YY_NEVER_INTERACTIVE
- b->yy_is_interactive = 0;
-#else
- b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-#endif
-#endif
- }
-
-
-#ifdef YY_USE_PROTOS
-void yy_flush_buffer( YY_BUFFER_STATE b )
-#else
-void yy_flush_buffer( b )
-YY_BUFFER_STATE b;
-#endif
-
- {
- if ( ! b )
- return;
-
- b->yy_n_chars = 0;
-
- /* We always need two end-of-buffer characters. The first causes
- * a transition to the end-of-buffer state. The second causes
- * a jam in that state.
- */
- b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
- b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
- b->yy_buf_pos = &b->yy_ch_buf[0];
-
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- if ( b == yy_current_buffer )
- yy_load_buffer_state();
- }
-
-
-#ifndef YY_NO_SCAN_BUFFER
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
-#else
-YY_BUFFER_STATE yy_scan_buffer( base, size )
-char *base;
-yy_size_t size;
-#endif
- {
- YY_BUFFER_STATE b;
-
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
- b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
-
- b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
- b->yy_buf_pos = b->yy_ch_buf = base;
- b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
- b->yy_n_chars = b->yy_buf_size;
- b->yy_is_interactive = 0;
- b->yy_at_bol = 1;
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- yy_switch_to_buffer( b );
-
- return b;
- }
-#endif
-
-
-#ifndef YY_NO_SCAN_STRING
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str )
-#else
-YY_BUFFER_STATE yy_scan_string( yy_str )
-yyconst char *yy_str;
-#endif
- {
- int len;
- for ( len = 0; yy_str[len]; ++len )
- ;
-
- return yy_scan_bytes( yy_str, len );
- }
-#endif
-
-
-#ifndef YY_NO_SCAN_BYTES
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len )
-#else
-YY_BUFFER_STATE yy_scan_bytes( bytes, len )
-yyconst char *bytes;
-int len;
-#endif
- {
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- int i;
-
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = len + 2;
- buf = (char *) yy_flex_alloc( n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
-
- for ( i = 0; i < len; ++i )
- buf[i] = bytes[i];
-
- buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;
-
- b = yy_scan_buffer( buf, n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
-
- /* It's okay to grow etc. this buffer, and we should throw it
- * away when we're done.
- */
- b->yy_is_our_buffer = 1;
-
- return b;
- }
-#endif
-
-
-#ifndef YY_NO_PUSH_STATE
-#ifdef YY_USE_PROTOS
-static void yy_push_state( int new_state )
-#else
-static void yy_push_state( new_state )
-int new_state;
-#endif
- {
- if ( yy_start_stack_ptr >= yy_start_stack_depth )
- {
- yy_size_t new_size;
-
- yy_start_stack_depth += YY_START_STACK_INCR;
- new_size = yy_start_stack_depth * sizeof( int );
-
- if ( ! yy_start_stack )
- yy_start_stack = (int *) yy_flex_alloc( new_size );
-
- else
- yy_start_stack = (int *) yy_flex_realloc(
- (void *) yy_start_stack, new_size );
-
- if ( ! yy_start_stack )
- YY_FATAL_ERROR(
- "out of memory expanding start-condition stack" );
- }
-
- yy_start_stack[yy_start_stack_ptr++] = YY_START;
-
- BEGIN(new_state);
- }
-#endif
-
-
-#ifndef YY_NO_POP_STATE
-static void yy_pop_state()
- {
- if ( --yy_start_stack_ptr < 0 )
- YY_FATAL_ERROR( "start-condition stack underflow" );
-
- BEGIN(yy_start_stack[yy_start_stack_ptr]);
- }
-#endif
-
-
-#ifndef YY_NO_TOP_STATE
-static int yy_top_state()
- {
- return yy_start_stack[yy_start_stack_ptr - 1];
- }
-#endif
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-#ifdef YY_USE_PROTOS
-static void yy_fatal_error( yyconst char msg[] )
-#else
-static void yy_fatal_error( msg )
-char msg[];
-#endif
- {
- (void) fprintf( stderr, "%s\n", msg );
- exit( YY_EXIT_FAILURE );
- }
-
-
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- yytext[yyleng] = yy_hold_char; \
- yy_c_buf_p = yytext + n; \
- yy_hold_char = *yy_c_buf_p; \
- *yy_c_buf_p = '\0'; \
- yyleng = n; \
- } \
- while ( 0 )
-
-
-/* Internal utility routines. */
-
-#ifndef yytext_ptr
-#ifdef YY_USE_PROTOS
-static void yy_flex_strncpy( char *s1, yyconst char *s2, int n )
-#else
-static void yy_flex_strncpy( s1, s2, n )
-char *s1;
-yyconst char *s2;
-int n;
-#endif
- {
- register int i;
- for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
- }
-#endif
-
-#ifdef YY_NEED_STRLEN
-#ifdef YY_USE_PROTOS
-static int yy_flex_strlen( yyconst char *s )
-#else
-static int yy_flex_strlen( s )
-yyconst char *s;
-#endif
- {
- register int n;
- for ( n = 0; s[n]; ++n )
- ;
-
- return n;
- }
-#endif
-
-
-#ifdef YY_USE_PROTOS
-static void *yy_flex_alloc( yy_size_t size )
-#else
-static void *yy_flex_alloc( size )
-yy_size_t size;
-#endif
- {
- return (void *) malloc( size );
- }
-
-#ifdef YY_USE_PROTOS
-static void *yy_flex_realloc( void *ptr, yy_size_t size )
-#else
-static void *yy_flex_realloc( ptr, size )
-void *ptr;
-yy_size_t size;
-#endif
- {
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
- * because both ANSI C and C++ allow castless assignment from
- * any pointer type to void*, and deal with argument conversions
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
- }
-
-#ifdef YY_USE_PROTOS
-static void yy_flex_free( void *ptr )
-#else
-static void yy_flex_free( ptr )
-void *ptr;
-#endif
- {
- free( ptr );
- }
-
-#if YY_MAIN
-int main()
- {
- yylex();
- return 0;
- }
-#endif
-#line 118 "lex_config.l"
-
-
-#ifndef yywrap
-int yywrap() { return 1; }
-#endif
-
-/*======================================================================
-
- Stuff to parse basic data types
-
-======================================================================*/
-
-static int lex_number(char *s)
-{
- yylval.num = strtoul(s, NULL, 0);
- return NUMBER;
-}
-
-static int lex_string(char *s)
-{
- int n = strlen(s);
- yylval.str = malloc(n-1);
- strncpy(yylval.str, s+1, n-2);
- yylval.str[n-2] = '\0';
- return STRING;
-}
-
-/*======================================================================
-
- Code to support nesting of configuration files
-
-======================================================================*/
-
-#define MAX_SOURCE_DEPTH 4
-struct source_stack {
- YY_BUFFER_STATE buffer;
- char *filename;
- int lineno, fileno;
- FILE *file;
- glob_t glob;
-} source_stack[MAX_SOURCE_DEPTH];
-static int source_stack_ptr = 0;
-static int parse_env = 0;
-
-static int get_glob(void)
-{
- struct source_stack *s = &source_stack[source_stack_ptr];
- while (s->fileno < s->glob.gl_pathc) {
- char *fn = s->glob.gl_pathv[s->fileno];
- s->file = fopen(fn, "r");
- if (s->file == NULL) {
- if (strpbrk(fn, "?*[") == NULL)
- syslog(LOG_INFO, "could not open '%s': %m", fn);
- s->fileno++;
- } else {
- current_lineno = 1;
- current_file = strdup(fn);
- yy_switch_to_buffer(yy_create_buffer(s->file, YY_BUF_SIZE));
- source_stack_ptr++;
- s->fileno++;
- return 0;
- }
- }
- return -1;
-}
-
-static void do_source(char *fn)
-{
- struct source_stack *s = &source_stack[source_stack_ptr];
-
- if (source_stack_ptr >= MAX_SOURCE_DEPTH) {
- syslog(LOG_INFO, "source depth limit exceeded");
- return;
- }
- glob(fn, GLOB_NOCHECK, NULL, &s->glob);
- s->fileno = 0;
- s->buffer = YY_CURRENT_BUFFER;
- s->lineno = current_lineno;
- s->filename = current_file;
- get_glob();
-}
-
-static int do_eof(void)
-{
- struct source_stack *s = &source_stack[--source_stack_ptr];
- if (source_stack_ptr < 0) {
- if (parse_env == 0) {
- char *t = getenv("PCMCIA_OPTS");
- if (t == NULL) return -1;
- parse_env = 1;
- source_stack_ptr = 0;
- current_file = "PCMCIA_OPTS";
- current_lineno = 1;
- yy_scan_string(t);
- return 0;
- } else
- return -1;
- }
- fclose(s->file);
- free(current_file);
- yy_delete_buffer(YY_CURRENT_BUFFER);
- if (get_glob() != 0) {
- yy_switch_to_buffer(s->buffer);
- current_lineno = s->lineno;
- current_file = s->filename;
- }
- return 0;
-}
-
-/*======================================================================
-
- The main entry point... returns -1 if the file can't be accessed.
-
-======================================================================*/
-int yyparse(void);
-
-int parse_configfile(char *fn)
-{
- FILE *f;
-
- f = fopen(fn, "r");
- if (!f) {
- syslog(LOG_INFO, "could not open '%s': %m", fn);
- return -1;
- }
- current_lineno = 1;
- current_file = fn;
- source_stack_ptr = 0;
- yyrestart(f);
- yyparse();
- fclose(f);
- return 0;
-}
-
diff --git a/mdk-stage1/pcmcia_/merge_from_pcitable b/mdk-stage1/pcmcia_/merge_from_pcitable
deleted file mode 100755
index 74fc56f31..000000000
--- a/mdk-stage1/pcmcia_/merge_from_pcitable
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/usr/bin/perl
-
-# This program will show on stdout yenta_socket stuff from pcitable
-# which is not in probe.c
-
-use MDK::Common;
-
-my @probelines = cat_('probe.c');
-my $status = 0;
-foreach (@probelines) {
- if ($status == 0) {
- /^pci_id_t pci_id\[\] = {/ and $status = 1;
- } elsif ($status == 1) {
- /^\s*{\s*0x([\da-f]+),\s*0x([\da-f]+),\s*"([^"]*)",\s*"([^"]*)"\s*}/
- and push @probes, { vendor => $1, device => $2, tag => $3, name => $4, vd => "$1$2" };
- /^};/ and last;
- }
-}
-
-require '/usr/bin/merge2pcitable.pl';
-my $drivers = read_pcitable("/usr/share/ldetect-lst/pcitable");
-
-foreach my $k (sort keys %$drivers) {
- $v = $drivers->{$k};
- $k =~ /^(....)(....)/;
- push @pcitable, { vendor => $1, device => $2, driver => $v->[0], name => $v->[1], vd => "$1$2" };
-}
-
-my @res;
-print "Missing in `probe.c':\n";
-foreach my $p (@pcitable) {
- next if $p->{driver} ne 'yenta_socket';
- member($p->{vd}, map { $_->{vd} } @probes) or
- push @res, " { 0x$p->{vendor}, 0x$p->{device}, \"..\", \"$p->{name}\" },\n";
-}
-print sort @res;
-@res = ();
-print "\n";
-
-print "Missing in pcitable:\n";
-foreach my $p (@probes) {
- my @r = grep { $_->{vd} eq $p->{vd} } @pcitable;
- @r > 1 and die "duplicate entry in pcitable <$p->{vd}>\n";
- if (@r && $r[0]->{driver} ne 'yenta_socket') {
- push @res, "0x$p->{vendor}\t0x$p->{device}\t\"yenta_socket\"\t\"$r[0]->{name}\"\n";
- $r[0]->{driver} ne 'unknown' and print STDERR "WARNING, driver for <$p->{vd}> was <$r[0]->{driver}>\n";
- }
-}
-print sort @res;
-@res = ();
-print "\n";
diff --git a/mdk-stage1/pcmcia_/pcmcia.h b/mdk-stage1/pcmcia_/pcmcia.h
deleted file mode 100644
index 1967b3497..000000000
--- a/mdk-stage1/pcmcia_/pcmcia.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _PCMCIA_CARDMGR_INTERFACE_H_
-#define _PCMCIA_CARDMGR_INTERFACE_H_
-
-char * pcmcia_probe(void);
-int cardmgr_call(void);
-
-#endif
diff --git a/mdk-stage1/pcmcia_/probe.c b/mdk-stage1/pcmcia_/probe.c
deleted file mode 100644
index 9877ad404..000000000
--- a/mdk-stage1/pcmcia_/probe.c
+++ /dev/null
@@ -1,513 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000-2001 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Code comes from /anonymous@projects.sourceforge.net:/pub/pcmcia-cs/pcmcia-cs-3.1.29.tar.bz2
- */
-
-/*======================================================================
-
- PCMCIA controller probe
-
- probe.c 1.55 2001/08/24 12:19:20
-
- The contents of this file are subject to the Mozilla Public
- License Version 1.1 (the "License"); you may not use this file
- except in compliance with the License. You may obtain a copy of
- the License at http://www.mozilla.org/MPL/
-
- Software distributed under the License is distributed on an "AS
- IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- implied. See the License for the specific language governing
- rights and limitations under the License.
-
- The initial developer of the original code is David A. Hinds
- <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
-
- Alternatively, the contents of this file may be used under the
- terms of the GNU General Public License version 2 (the "GPL"), in
- which case the provisions of the GPL are applicable instead of the
- above. If you wish to allow the use of your version of this file
- only under the terms of the GPL and not to allow others to use
- your version of this file under the MPL, indicate your decision
- by deleting the provisions above and replace them with the notice
- and other provisions required by the GPL. If you do not delete
- the provisions above, a recipient may use your version of this
- file under either the MPL or the GPL.
-
-======================================================================*/
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-
-//mdk-stage1// #include <pcmcia/config.h>
-#include "log.h"
-#include "pcmcia.h"
-
-/*====================================================================*/
-
-//mdk-stage1// #ifdef CONFIG_PCI
-
-typedef struct {
- u_short vendor, device;
- char *tag;
- char *name;
-} pci_id_t;
-
-pci_id_t pci_id[] = {
- { 0x1013, 0x1100, "Cirrus Logic CL 6729", "Cirrus PD6729" },
- { 0x1013, 0x1110, "Cirrus Logic PD 6832", "Cirrus PD6832" },
- { 0x10b3, 0xb106, "SMC 34C90", "SMC 34C90" },
- { 0x1180, 0x0465, "Ricoh RL5C465", "Ricoh RL5C465" },
- { 0x1180, 0x0466, "Ricoh RL5C466", "Ricoh RL5C466" },
- { 0x1180, 0x0475, "Ricoh RL5C475", "Ricoh RL5C475" },
- { 0x1180, 0x0476, "Ricoh RL5C476", "Ricoh RL5C476" },
- { 0x1180, 0x0477, "Ricoh RL5c477", "Ricoh RL5c477" }, //mdk-stage1// added from pcitable
- { 0x1180, 0x0478, "Ricoh RL5C478", "Ricoh RL5C478" },
- { 0x104c, 0xac12, "Texas Instruments PCI1130", "TI 1130" },
- { 0x104c, 0xac13, "Texas Instruments PCI1031", "TI 1031" },
- { 0x104c, 0xac15, "Texas Instruments PCI1131", "TI 1131" },
- { 0x104c, 0xac1a, "Texas Instruments PCI1210", "TI 1210" },
- { 0x104c, 0xac1e, "Texas Instruments PCI1211", "TI 1211" },
- { 0x104c, 0xac17, "Texas Instruments PCI1220", "TI 1220" },
- { 0x104c, 0xac19, "Texas Instruments PCI1221", "TI 1221" },
- { 0x104c, 0xac1c, "Texas Instruments PCI1225", "TI 1225" },
- { 0x104c, 0xac16, "Texas Instruments PCI1250", "TI 1250A" },
- { 0x104c, 0xac1d, "Texas Instruments PCI1251A", "TI 1251A" },
- { 0x104c, 0xac1f, "Texas Instruments PCI1251B", "TI 1251B" },
- { 0x104c, 0xac50, "Texas Instruments PCI1410", "TI 1410" },
- { 0x104c, 0xac51, "Texas Instruments PCI1420", "TI 1420" },
- { 0x104c, 0xac1b, "Texas Instruments PCI1450", "TI 1450" },
- { 0x104c, 0xac52, "Texas Instruments PCI1451", "TI 1451" },
- { 0x104c, 0xac41, "Texas Instruments PCI4410", "TI 4410" },
- { 0x104c, 0xac40, "Texas Instruments PCI4450", "TI 4450" },
- { 0x104c, 0xac42, "Texas Instruments PCI4451", "TI 4451" },
- { 0x1217, 0x6729, "O2 Micro 6729", "O2Micro OZ6729" },
- { 0x1217, 0x673a, "O2 Micro 6730", "O2Micro OZ6730" },
- { 0x1217, 0x6832, "O2 Micro 6832/6833", "O2Micro OZ6832/OZ6833" },
- { 0x1217, 0x6836, "O2 Micro 6836/6860", "O2Micro OZ6836/OZ6860" },
- { 0x1217, 0x6872, "O2 Micro 6812", "O2Micro OZ6812" },
- { 0x1217, 0x6925, "O2 Micro 6922", "O2Micro OZ6922 CardBus Controller" },
- { 0x1217, 0x6933, "O2 Micro 6933", "O2Micro OZ6933 Cardbus Controller" },
- { 0x1217, 0x6972, "O2 Micro 6912", "O2Micro OZ6912 CardBus Controller" },
- { 0x1179, 0x0603, "Toshiba ToPIC95-A", "Toshiba ToPIC95-A" },
- { 0x1179, 0x060a, "Toshiba ToPIC95-B", "Toshiba ToPIC95-B" },
- { 0x1179, 0x060f, "Toshiba ToPIC97", "Toshiba ToPIC97" },
- { 0x1179, 0x0617, "Toshiba ToPIC100", "Toshiba ToPIC100" },
- { 0x119b, 0x1221, "Omega Micro 82C092G", "Omega Micro 82C092G" },
- { 0x8086, 0x1221, "Intel 82092AA", "Intel 82092AA_0" },
- { 0x8086, 0x1222, "Intel 82092AA", "Intel 82092AA_1" } //mdk-stage1// added from pcitable
-};
-#define PCI_COUNT (sizeof(pci_id)/sizeof(pci_id_t))
-
-char * driver = NULL;
-
-static int pci_probe(void)
-{
- char s[256], *name = NULL;
- u_int device, vendor, i;
- FILE *f;
-
-//mdk-stage1// if (!module)
- log_message("PCMCIA: probing PCI bus..");
-
- if ((f = fopen("/proc/bus/pci/devices", "r")) != NULL) {
- while (fgets(s, 256, f) != NULL) {
- u_int n = strtoul(s+5, NULL, 16);
- vendor = (n >> 16); device = (n & 0xffff);
- for (i = 0; i < PCI_COUNT; i++)
- if ((vendor == pci_id[i].vendor) &&
- (device == pci_id[i].device)) break;
- if (i < PCI_COUNT) {
- name = pci_id[i].name;
- if (pci_id[i].vendor == 0x1013 && pci_id[i].device == 0x1100)
- driver = "i82365";
- else
- driver = "yenta_socket";
- break;
- }
- }
- }
-//mdk-stage1// else if ((f = fopen("/proc/pci", "r")) != NULL) {
-//mdk-stage1// while (fgets(s, 256, f) != NULL) {
-//mdk-stage1// t = strstr(s, "Device id=");
-//mdk-stage1// if (t) {
-//mdk-stage1// device = strtoul(t+10, NULL, 16);
-//mdk-stage1// t = strstr(s, "Vendor id=");
-//mdk-stage1// vendor = strtoul(t+10, NULL, 16);
-//mdk-stage1// for (i = 0; i < PCI_COUNT; i++)
-//mdk-stage1// if ((vendor == pci_id[i].vendor) &&
-//mdk-stage1// (device == pci_id[i].device)) break;
-//mdk-stage1// } else
-//mdk-stage1// for (i = 0; i < PCI_COUNT; i++)
-//mdk-stage1// if (strstr(s, pci_id[i].tag) != NULL) break;
-//mdk-stage1// if (i != PCI_COUNT) {
-//mdk-stage1// name = pci_id[i].name;
-//mdk-stage1// break;
-//mdk-stage1// } else {
-//mdk-stage1// t = strstr(s, "CardBus bridge");
-//mdk-stage1// if (t != NULL) {
-//mdk-stage1// name = t + 16;
-//mdk-stage1// t = strchr(s, '(');
-//mdk-stage1// t[-1] = '\0';
-//mdk-stage1// break;
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// }
- fclose(f);
-
- if (name) {
-//mdk-stage1// if (module)
-//mdk-stage1// printf("i82365\n");
-//mdk-stage1// else
- log_message("\t%s found, 2 sockets.", name);
- return 0;
- } else {
-//mdk-stage1// if (!module)
- log_message("\tnot found.");
- return -ENODEV;
- }
-}
-//mdk-stage1// #endif
-
-/*====================================================================*/
-
-//mdk-stage1// #ifdef CONFIG_ISA
-//mdk-stage1//
-//mdk-stage1// #ifdef __GLIBC__
-#include <sys/io.h>
-//mdk-stage1// #else
-//mdk-stage1// #include <asm/io.h>
-//mdk-stage1// #endif
-typedef u_short ioaddr_t;
-
-#include "i82365.h"
-#include "cirrus.h"
-#include "vg468.h"
-
-static ioaddr_t i365_base = 0x03e0;
-
-static u_char i365_get(u_short sock, u_short reg)
-{
- u_char val = I365_REG(sock, reg);
- outb(val, i365_base); val = inb(i365_base+1);
- return val;
-}
-
-static void i365_set(u_short sock, u_short reg, u_char data)
-{
- u_char val = I365_REG(sock, reg);
- outb(val, i365_base); outb(data, i365_base+1);
-}
-
-static void i365_bset(u_short sock, u_short reg, u_char mask)
-{
- u_char d = i365_get(sock, reg);
- d |= mask;
- i365_set(sock, reg, d);
-}
-
-static void i365_bclr(u_short sock, u_short reg, u_char mask)
-{
- u_char d = i365_get(sock, reg);
- d &= ~mask;
- i365_set(sock, reg, d);
-}
-
-int i365_probe(void)
-{
- int val, sock, done;
- char *name = "i82365sl";
-
-//mdk-stage1// if (!module)
- log_message("PCMCIA: probing for Intel PCIC (ISA)..");
-//mdk-stage1// if (verbose) printf("\n");
-
- sock = done = 0;
- if (ioperm(i365_base, 4, 1)) {
- log_perror("PCMCIA: ioperm");
- return -1;
- }
- ioperm(0x80, 1, 1);
- for (; sock < 2; sock++) {
- val = i365_get(sock, I365_IDENT);
-//mdk-stage1// if (verbose)
-//mdk-stage1// printf(" ident(%d)=%#2.2x", sock, val);
- switch (val) {
- case 0x82:
- name = "i82365sl A step";
- break;
- case 0x83:
- name = "i82365sl B step";
- break;
- case 0x84:
- name = "VLSI 82C146";
- break;
- case 0x88: case 0x89: case 0x8a:
- name = "IBM Clone";
- break;
- case 0x8b: case 0x8c:
- break;
- default:
- done = 1;
- }
- if (done) break;
- }
-
-//mdk-stage1// if (verbose) printf("\n ");
- if (sock == 0) {
-//mdk-stage1// if (!module)
- log_message("\tnot found.");
- return -ENODEV;
- }
-
- if ((sock == 2) && (strcmp(name, "VLSI 82C146") == 0))
- name = "i82365sl DF";
-
- /* Check for Vadem chips */
- outb(0x0e, i365_base);
- outb(0x37, i365_base);
- i365_bset(0, VG468_MISC, VG468_MISC_VADEMREV);
- val = i365_get(0, I365_IDENT);
- if (val & I365_IDENT_VADEM) {
- if ((val & 7) < 4)
- name = "Vadem VG-468";
- else
- name = "Vadem VG-469";
- i365_bclr(0, VG468_MISC, VG468_MISC_VADEMREV);
- }
-
- /* Check for Cirrus CL-PD67xx chips */
- i365_set(0, PD67_CHIP_INFO, 0);
- val = i365_get(0, PD67_CHIP_INFO);
- if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
- val = i365_get(0, PD67_CHIP_INFO);
- if ((val & PD67_INFO_CHIP_ID) == 0) {
- if (val & PD67_INFO_SLOTS)
- name = "Cirrus CL-PD672x";
- else {
- name = "Cirrus CL-PD6710";
- sock = 1;
- }
- i365_set(0, PD67_EXT_INDEX, 0xe5);
- if (i365_get(0, PD67_EXT_INDEX) != 0xe5)
- name = "VIA VT83C469";
- }
- }
-
-//mdk-stage1// if (module)
-//mdk-stage1// printf("i82365\n");
-//mdk-stage1// else
- printf("\t%s found, %d sockets.\n", name, sock);
- return 0;
-
-} /* i365_probe */
-
-//mdk-stage1//#endif /* CONFIG_ISA */
-
-/*====================================================================*/
-
-//mdk-stage1//#ifdef CONFIG_ISA
-
-#include "tcic.h"
-
-//mdk-stage1//static ioaddr_t tcic_base = TCIC_BASE;
-
-static u_char tcic_getb(ioaddr_t base, u_char reg)
-{
- u_char val = inb(base+reg);
- return val;
-}
-
-static void tcic_setb(ioaddr_t base, u_char reg, u_char data)
-{
- outb(data, base+reg);
-}
-
-static u_short tcic_getw(ioaddr_t base, u_char reg)
-{
- u_short val = inw(base+reg);
- return val;
-}
-
-static void tcic_setw(ioaddr_t base, u_char reg, u_short data)
-{
- outw(data, base+reg);
-}
-
-static u_short tcic_aux_getw(ioaddr_t base, u_short reg)
-{
- u_char mode = (tcic_getb(base, TCIC_MODE) & TCIC_MODE_PGMMASK) | reg;
- tcic_setb(base, TCIC_MODE, mode);
- return tcic_getw(base, TCIC_AUX);
-}
-
-static void tcic_aux_setw(ioaddr_t base, u_short reg, u_short data)
-{
- u_char mode = (tcic_getb(base, TCIC_MODE) & TCIC_MODE_PGMMASK) | reg;
- tcic_setb(base, TCIC_MODE, mode);
- tcic_setw(base, TCIC_AUX, data);
-}
-
-static int get_tcic_id(ioaddr_t base)
-{
- u_short id;
- tcic_aux_setw(base, TCIC_AUX_TEST, TCIC_TEST_DIAG);
- id = tcic_aux_getw(base, TCIC_AUX_ILOCK);
- id = (id & TCIC_ILOCKTEST_ID_MASK) >> TCIC_ILOCKTEST_ID_SH;
- tcic_aux_setw(base, TCIC_AUX_TEST, 0);
- return id;
-}
-
-int tcic_probe_at(ioaddr_t base)
-{
- int i;
- u_short old;
-
- /* Anything there?? */
- for (i = 0; i < 0x10; i += 2)
- if (tcic_getw(base, i) == 0xffff)
- return -1;
-
-//mdk-stage1// if (!module)
- log_message("\tat %#3.3x: ", base); fflush(stdout);
-
- /* Try to reset the chip */
- tcic_setw(base, TCIC_SCTRL, TCIC_SCTRL_RESET);
- tcic_setw(base, TCIC_SCTRL, 0);
-
- /* Can we set the addr register? */
- old = tcic_getw(base, TCIC_ADDR);
- tcic_setw(base, TCIC_ADDR, 0);
- if (tcic_getw(base, TCIC_ADDR) != 0) {
- tcic_setw(base, TCIC_ADDR, old);
- return -2;
- }
-
- tcic_setw(base, TCIC_ADDR, 0xc3a5);
- if (tcic_getw(base, TCIC_ADDR) != 0xc3a5)
- return -3;
-
- return 2;
-}
-
-int tcic_probe(void)
-{
- int sock, id;
-
-//mdk-stage1// if (!module)
- log_message("PCMCIA: probing for Databook TCIC-2 (ISA).."); fflush(stdout);
-
- if (ioperm(TCIC_BASE, 16, 1)) {
- log_perror("PCMCIA: ioperm");
- return -1;
- }
- ioperm(0x80, 1, 1);
- sock = tcic_probe_at(TCIC_BASE);
-
- if (sock <= 0) {
-//mdk-stage1// if (!module)
- log_message("\tnot found.");
- return -ENODEV;
- }
-
-//mdk-stage1// if (module)
-//mdk-stage1// printf("tcic\n");
-//mdk-stage1// else {
- id = get_tcic_id(TCIC_BASE);
- switch (id) {
- case TCIC_ID_DB86082:
- log_message("DB86082"); break;
- case TCIC_ID_DB86082A:
- log_message("DB86082A"); break;
- case TCIC_ID_DB86084:
- log_message("DB86084"); break;
- case TCIC_ID_DB86084A:
- log_message("DB86084A"); break;
- case TCIC_ID_DB86072:
- log_message("DB86072"); break;
- case TCIC_ID_DB86184:
- log_message("DB86184"); break;
- case TCIC_ID_DB86082B:
- log_message("DB86082B"); break;
- default:
- log_message("Unknown TCIC-2 ID 0x%02x", id);
- }
- log_message(" found at %#6x, %d sockets.", TCIC_BASE, sock);
-//mdk-stage1// }
- return 0;
-
-} /* tcic_probe */
-
-//mdk-stage1// #endif /* CONFIG_ISA */
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1//
-//mdk-stage1// int main(int argc, char *argv[])
-//mdk-stage1// {
-//mdk-stage1// int optch, errflg;
-//mdk-stage1// extern char *optarg;
-//mdk-stage1// int verbose = 0, module = 0;
-//mdk-stage1//
-//mdk-stage1// errflg = 0;
-//mdk-stage1// while ((optch = getopt(argc, argv, "t:vxm")) != -1) {
-//mdk-stage1// switch (optch) {
-//mdk-stage1// #ifdef CONFIG_ISA
-//mdk-stage1// case 't':
-//mdk-stage1// tcic_base = strtoul(optarg, NULL, 0); break;
-//mdk-stage1// #endif
-//mdk-stage1// case 'v':
-//mdk-stage1// verbose = 1; break;
-//mdk-stage1// case 'm':
-//mdk-stage1// module = 1; break;
-//mdk-stage1// default:
-//mdk-stage1// errflg = 1; break;
-//mdk-stage1// }
-//mdk-stage1// }
-//mdk-stage1// if (errflg || (optind < argc)) {
-//mdk-stage1// fprintf(stderr, "usage: %s [-t tcic_base] [-v] [-m]\n", argv[0]);
-//mdk-stage1// exit(EXIT_FAILURE);
-//mdk-stage1// }
-//mdk-stage1//
-//mdk-stage1// #ifdef CONFIG_PCI
-//mdk-stage1// if (pci_probe(verbose, module) == 0)
-//mdk-stage1// exit(EXIT_SUCCESS);
-//mdk-stage1// #endif
-//mdk-stage1// #ifdef CONFIG_ISA
-//mdk-stage1// if (i365_probe(verbose, module) == 0)
-//mdk-stage1// exit(EXIT_SUCCESS);
-//mdk-stage1// else if (tcic_probe(verbose, module, tcic_base) == 0)
-//mdk-stage1// exit(EXIT_SUCCESS);
-//mdk-stage1// #endif
-//mdk-stage1// exit(EXIT_FAILURE);
-//mdk-stage1// return 0;
-//mdk-stage1// }
-
-
-char * pcmcia_probe(void)
-{
- if (!pci_probe())
- return driver;
- else if (!i365_probe())
- return "i82365";
- else if (!tcic_probe())
- return "tcic";
- else
- return NULL;
-}
diff --git a/mdk-stage1/pcmcia_/tcic.h b/mdk-stage1/pcmcia_/tcic.h
deleted file mode 100644
index cad193885..000000000
--- a/mdk-stage1/pcmcia_/tcic.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * tcic.h 1.15 2001/08/24 12:15:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_TCIC_H
-#define _LINUX_TCIC_H
-
-#define TCIC_BASE 0x240
-
-/* offsets of registers from TCIC_BASE */
-#define TCIC_DATA 0x00
-#define TCIC_ADDR 0x02
-#define TCIC_SCTRL 0x06
-#define TCIC_SSTAT 0x07
-#define TCIC_MODE 0x08
-#define TCIC_PWR 0x09
-#define TCIC_EDC 0x0A
-#define TCIC_ICSR 0x0C
-#define TCIC_IENA 0x0D
-#define TCIC_AUX 0x0E
-
-#define TCIC_SS_SHFT 12
-#define TCIC_SS_MASK 0x7000
-
-/* Flags for TCIC_ADDR */
-#define TCIC_ADR2_REG 0x8000
-#define TCIC_ADR2_INDREG 0x0800
-
-#define TCIC_ADDR_REG 0x80000000
-#define TCIC_ADDR_SS_SHFT (TCIC_SS_SHFT+16)
-#define TCIC_ADDR_SS_MASK (TCIC_SS_MASK<<16)
-#define TCIC_ADDR_INDREG 0x08000000
-#define TCIC_ADDR_IO 0x04000000
-#define TCIC_ADDR_MASK 0x03ffffff
-
-/* Flags for TCIC_SCTRL */
-#define TCIC_SCTRL_ENA 0x01
-#define TCIC_SCTRL_INCMODE 0x18
-#define TCIC_SCTRL_INCMODE_HOLD 0x00
-#define TCIC_SCTRL_INCMODE_WORD 0x08
-#define TCIC_SCTRL_INCMODE_REG 0x10
-#define TCIC_SCTRL_INCMODE_AUTO 0x18
-#define TCIC_SCTRL_EDCSUM 0x20
-#define TCIC_SCTRL_RESET 0x80
-
-/* Flags for TCIC_SSTAT */
-#define TCIC_SSTAT_6US 0x01
-#define TCIC_SSTAT_10US 0x02
-#define TCIC_SSTAT_PROGTIME 0x04
-#define TCIC_SSTAT_LBAT1 0x08
-#define TCIC_SSTAT_LBAT2 0x10
-#define TCIC_SSTAT_RDY 0x20 /* Inverted */
-#define TCIC_SSTAT_WP 0x40
-#define TCIC_SSTAT_CD 0x80 /* Card detect */
-
-/* Flags for TCIC_MODE */
-#define TCIC_MODE_PGMMASK 0x1f
-#define TCIC_MODE_NORMAL 0x00
-#define TCIC_MODE_PGMWR 0x01
-#define TCIC_MODE_PGMRD 0x02
-#define TCIC_MODE_PGMCE 0x04
-#define TCIC_MODE_PGMDBW 0x08
-#define TCIC_MODE_PGMWORD 0x10
-#define TCIC_MODE_AUXSEL_MASK 0xe0
-
-/* Registers accessed through TCIC_AUX, by setting TCIC_MODE */
-#define TCIC_AUX_TCTL (0<<5)
-#define TCIC_AUX_PCTL (1<<5)
-#define TCIC_AUX_WCTL (2<<5)
-#define TCIC_AUX_EXTERN (3<<5)
-#define TCIC_AUX_PDATA (4<<5)
-#define TCIC_AUX_SYSCFG (5<<5)
-#define TCIC_AUX_ILOCK (6<<5)
-#define TCIC_AUX_TEST (7<<5)
-
-/* Flags for TCIC_PWR */
-#define TCIC_PWR_VCC(sock) (0x01<<(sock))
-#define TCIC_PWR_VCC_MASK 0x03
-#define TCIC_PWR_VPP(sock) (0x08<<(sock))
-#define TCIC_PWR_VPP_MASK 0x18
-#define TCIC_PWR_CLIMENA 0x40
-#define TCIC_PWR_CLIMSTAT 0x80
-
-/* Flags for TCIC_ICSR */
-#define TCIC_ICSR_CLEAR 0x01
-#define TCIC_ICSR_SET 0x02
-#define TCIC_ICSR_JAM (TCIC_ICSR_CLEAR|TCIC_ICSR_SET)
-#define TCIC_ICSR_STOPCPU 0x04
-#define TCIC_ICSR_ILOCK 0x08
-#define TCIC_ICSR_PROGTIME 0x10
-#define TCIC_ICSR_ERR 0x20
-#define TCIC_ICSR_CDCHG 0x40
-#define TCIC_ICSR_IOCHK 0x80
-
-/* Flags for TCIC_IENA */
-#define TCIC_IENA_CFG_MASK 0x03
-#define TCIC_IENA_CFG_OFF 0x00 /* disabled */
-#define TCIC_IENA_CFG_OD 0x01 /* active low, open drain */
-#define TCIC_IENA_CFG_LOW 0x02 /* active low, totem pole */
-#define TCIC_IENA_CFG_HIGH 0x03 /* active high, totem pole */
-#define TCIC_IENA_ILOCK 0x08
-#define TCIC_IENA_PROGTIME 0x10
-#define TCIC_IENA_ERR 0x20 /* overcurrent or iochk */
-#define TCIC_IENA_CDCHG 0x40
-
-/* Flags for TCIC_AUX_WCTL */
-#define TCIC_WAIT_COUNT_MASK 0x001f
-#define TCIC_WAIT_ASYNC 0x0020
-#define TCIC_WAIT_SENSE 0x0040
-#define TCIC_WAIT_SRC 0x0080
-#define TCIC_WCTL_WR 0x0100
-#define TCIC_WCTL_RD 0x0200
-#define TCIC_WCTL_CE 0x0400
-#define TCIC_WCTL_LLBAT1 0x0800
-#define TCIC_WCTL_LLBAT2 0x1000
-#define TCIC_WCTL_LRDY 0x2000
-#define TCIC_WCTL_LWP 0x4000
-#define TCIC_WCTL_LCD 0x8000
-
-/* Flags for TCIC_AUX_SYSCFG */
-#define TCIC_SYSCFG_IRQ_MASK 0x000f
-#define TCIC_SYSCFG_MCSFULL 0x0010
-#define TCIC_SYSCFG_IO1723 0x0020
-#define TCIC_SYSCFG_MCSXB 0x0040
-#define TCIC_SYSCFG_ICSXB 0x0080
-#define TCIC_SYSCFG_NOPDN 0x0100
-#define TCIC_SYSCFG_MPSEL_SHFT 9
-#define TCIC_SYSCFG_MPSEL_MASK 0x0e00
-#define TCIC_SYSCFG_MPSENSE 0x2000
-#define TCIC_SYSCFG_AUTOBUSY 0x4000
-#define TCIC_SYSCFG_ACC 0x8000
-
-#define TCIC_ILOCK_OUT 0x01
-#define TCIC_ILOCK_SENSE 0x02
-#define TCIC_ILOCK_CRESET 0x04
-#define TCIC_ILOCK_CRESENA 0x08
-#define TCIC_ILOCK_CWAIT 0x10
-#define TCIC_ILOCK_CWAITSNS 0x20
-#define TCIC_ILOCK_HOLD_MASK 0xc0
-#define TCIC_ILOCK_HOLD_CCLK 0xc0
-
-#define TCIC_ILOCKTEST_ID_SH 8
-#define TCIC_ILOCKTEST_ID_MASK 0x7f00
-#define TCIC_ILOCKTEST_MCIC_1 0x8000
-
-#define TCIC_ID_DB86082 0x02
-#define TCIC_ID_DB86082A 0x03
-#define TCIC_ID_DB86084 0x04
-#define TCIC_ID_DB86084A 0x08
-#define TCIC_ID_DB86072 0x15
-#define TCIC_ID_DB86184 0x14
-#define TCIC_ID_DB86082B 0x17
-
-#define TCIC_TEST_DIAG 0x8000
-
-/*
- * Indirectly addressed registers
- */
-
-#define TCIC_SCF1(sock) ((sock)<<3)
-#define TCIC_SCF2(sock) (((sock)<<3)+2)
-
-/* Flags for SCF1 */
-#define TCIC_SCF1_IRQ_MASK 0x000f
-#define TCIC_SCF1_IRQ_OFF 0x0000
-#define TCIC_SCF1_IRQOC 0x0010
-#define TCIC_SCF1_PCVT 0x0020
-#define TCIC_SCF1_IRDY 0x0040
-#define TCIC_SCF1_ATA 0x0080
-#define TCIC_SCF1_DMA_SHIFT 8
-#define TCIC_SCF1_DMA_MASK 0x0700
-#define TCIC_SCF1_DMA_OFF 0
-#define TCIC_SCF1_DREQ2 2
-#define TCIC_SCF1_IOSTS 0x0800
-#define TCIC_SCF1_SPKR 0x1000
-#define TCIC_SCF1_FINPACK 0x2000
-#define TCIC_SCF1_DELWR 0x4000
-#define TCIC_SCF1_HD7IDE 0x8000
-
-/* Flags for SCF2 */
-#define TCIC_SCF2_RI 0x0001
-#define TCIC_SCF2_IDBR 0x0002
-#define TCIC_SCF2_MDBR 0x0004
-#define TCIC_SCF2_MLBAT1 0x0008
-#define TCIC_SCF2_MLBAT2 0x0010
-#define TCIC_SCF2_MRDY 0x0020
-#define TCIC_SCF2_MWP 0x0040
-#define TCIC_SCF2_MCD 0x0080
-#define TCIC_SCF2_MALL 0x00f8
-
-/* Indirect addresses for memory window registers */
-#define TCIC_MWIN(sock,map) (0x100+(((map)+((sock)<<2))<<3))
-#define TCIC_MBASE_X 2
-#define TCIC_MMAP_X 4
-#define TCIC_MCTL_X 6
-
-#define TCIC_MBASE_4K_BIT 0x4000
-#define TCIC_MBASE_HA_SHFT 12
-#define TCIC_MBASE_HA_MASK 0x0fff
-
-#define TCIC_MMAP_REG 0x8000
-#define TCIC_MMAP_CA_SHFT 12
-#define TCIC_MMAP_CA_MASK 0x3fff
-
-#define TCIC_MCTL_WSCNT_MASK 0x001f
-#define TCIC_MCTL_WCLK 0x0020
-#define TCIC_MCTL_WCLK_CCLK 0x0000
-#define TCIC_MCTL_WCLK_BCLK 0x0020
-#define TCIC_MCTL_QUIET 0x0040
-#define TCIC_MCTL_WP 0x0080
-#define TCIC_MCTL_ACC 0x0100
-#define TCIC_MCTL_KE 0x0200
-#define TCIC_MCTL_EDC 0x0400
-#define TCIC_MCTL_B8 0x0800
-#define TCIC_MCTL_SS_SHFT TCIC_SS_SHFT
-#define TCIC_MCTL_SS_MASK TCIC_SS_MASK
-#define TCIC_MCTL_ENA 0x8000
-
-/* Indirect addresses for I/O window registers */
-#define TCIC_IWIN(sock,map) (0x200+(((map)+((sock)<<1))<<2))
-#define TCIC_IBASE_X 0
-#define TCIC_ICTL_X 2
-
-#define TCIC_ICTL_WSCNT_MASK TCIC_MCTL_WSCNT_MASK
-#define TCIC_ICTL_QUIET TCIC_MCTL_QUIET
-#define TCIC_ICTL_1K 0x0080
-#define TCIC_ICTL_PASS16 0x0100
-#define TCIC_ICTL_ACC TCIC_MCTL_ACC
-#define TCIC_ICTL_TINY 0x0200
-#define TCIC_ICTL_B16 0x0400
-#define TCIC_ICTL_B8 TCIC_MCTL_B8
-#define TCIC_ICTL_BW_MASK (TCIC_ICTL_B16|TCIC_ICTL_B8)
-#define TCIC_ICTL_BW_DYN 0
-#define TCIC_ICTL_BW_8 TCIC_ICTL_B8
-#define TCIC_ICTL_BW_16 TCIC_ICTL_B16
-#define TCIC_ICTL_BW_ATA (TCIC_ICTL_B16|TCIC_ICTL_B8)
-#define TCIC_ICTL_SS_SHFT TCIC_SS_SHFT
-#define TCIC_ICTL_SS_MASK TCIC_SS_MASK
-#define TCIC_ICTL_ENA TCIC_MCTL_ENA
-
-#endif /* _LINUX_TCIC_H */
diff --git a/mdk-stage1/pcmcia_/version.h b/mdk-stage1/pcmcia_/version.h
deleted file mode 100644
index 3be8f28bc..000000000
--- a/mdk-stage1/pcmcia_/version.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* version.h 1.101 2001/08/09 12:29:14 (David Hinds) */
-
-#define CS_RELEASE "3.1.29"
-#define CS_RELEASE_CODE 0x311d
diff --git a/mdk-stage1/pcmcia_/vg468.h b/mdk-stage1/pcmcia_/vg468.h
deleted file mode 100644
index 93dc00b37..000000000
--- a/mdk-stage1/pcmcia_/vg468.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * vg468.h 1.14 2001/08/24 12:15:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_VG468_H
-#define _LINUX_VG468_H
-
-/* Special bit in I365_IDENT used for Vadem chip detection */
-#define I365_IDENT_VADEM 0x08
-
-/* Special definitions in I365_POWER */
-#define VG468_VPP2_MASK 0x0c
-#define VG468_VPP2_5V 0x04
-#define VG468_VPP2_12V 0x08
-
-/* Unique Vadem registers */
-#define VG469_VSENSE 0x1f /* Card voltage sense */
-#define VG469_VSELECT 0x2f /* Card voltage select */
-#define VG468_CTL 0x38 /* Control register */
-#define VG468_TIMER 0x39 /* Timer control */
-#define VG468_MISC 0x3a /* Miscellaneous */
-#define VG468_GPIO_CFG 0x3b /* GPIO configuration */
-#define VG469_EXT_MODE 0x3c /* Extended mode register */
-#define VG468_SELECT 0x3d /* Programmable chip select */
-#define VG468_SELECT_CFG 0x3e /* Chip select configuration */
-#define VG468_ATA 0x3f /* ATA control */
-
-/* Flags for VG469_VSENSE */
-#define VG469_VSENSE_A_VS1 0x01
-#define VG469_VSENSE_A_VS2 0x02
-#define VG469_VSENSE_B_VS1 0x04
-#define VG469_VSENSE_B_VS2 0x08
-
-/* Flags for VG469_VSELECT */
-#define VG469_VSEL_VCC 0x03
-#define VG469_VSEL_5V 0x00
-#define VG469_VSEL_3V 0x03
-#define VG469_VSEL_MAX 0x0c
-#define VG469_VSEL_EXT_STAT 0x10
-#define VG469_VSEL_EXT_BUS 0x20
-#define VG469_VSEL_MIXED 0x40
-#define VG469_VSEL_ISA 0x80
-
-/* Flags for VG468_CTL */
-#define VG468_CTL_SLOW 0x01 /* 600ns memory timing */
-#define VG468_CTL_ASYNC 0x02 /* Asynchronous bus clocking */
-#define VG468_CTL_TSSI 0x08 /* Tri-state some outputs */
-#define VG468_CTL_DELAY 0x10 /* Card detect debounce */
-#define VG468_CTL_INPACK 0x20 /* Obey INPACK signal? */
-#define VG468_CTL_POLARITY 0x40 /* VCCEN polarity */
-#define VG468_CTL_COMPAT 0x80 /* Compatibility stuff */
-
-#define VG469_CTL_WS_COMPAT 0x04 /* Wait state compatibility */
-#define VG469_CTL_STRETCH 0x10 /* LED stretch */
-
-/* Flags for VG468_TIMER */
-#define VG468_TIMER_ZEROPWR 0x10 /* Zero power control */
-#define VG468_TIMER_SIGEN 0x20 /* Power up */
-#define VG468_TIMER_STATUS 0x40 /* Activity timer status */
-#define VG468_TIMER_RES 0x80 /* Timer resolution */
-#define VG468_TIMER_MASK 0x0f /* Activity timer timeout */
-
-/* Flags for VG468_MISC */
-#define VG468_MISC_GPIO 0x04 /* General-purpose IO */
-#define VG468_MISC_DMAWSB 0x08 /* DMA wait state control */
-#define VG469_MISC_LEDENA 0x10 /* LED enable */
-#define VG468_MISC_VADEMREV 0x40 /* Vadem revision control */
-#define VG468_MISC_UNLOCK 0x80 /* Unique register lock */
-
-/* Flags for VG469_EXT_MODE_A */
-#define VG469_MODE_VPPST 0x03 /* Vpp steering control */
-#define VG469_MODE_INT_SENSE 0x04 /* Internal voltage sense */
-#define VG469_MODE_CABLE 0x08
-#define VG469_MODE_COMPAT 0x10 /* i82365sl B or DF step */
-#define VG469_MODE_TEST 0x20
-#define VG469_MODE_RIO 0x40 /* Steer RIO to INTR? */
-
-/* Flags for VG469_EXT_MODE_B */
-#define VG469_MODE_B_3V 0x01 /* 3.3v for socket B */
-
-/* Data structure for tracking vendor-specific state */
-typedef struct vg46x_state_t {
- u_char ctl; /* VG468_CTL */
- u_char ema; /* VG468_EXT_MODE_A */
-} vg46x_state_t;
-
-#endif /* _LINUX_VG468_H */
diff --git a/mdk-stage1/pcmcia_/yacc_config.c b/mdk-stage1/pcmcia_/yacc_config.c
deleted file mode 100644
index 79ec16eb5..000000000
--- a/mdk-stage1/pcmcia_/yacc_config.c
+++ /dev/null
@@ -1,1015 +0,0 @@
-#define YYBYACC 1
-#define YYMAJOR 1
-#define YYMINOR 9
-#define yyclearin (yychar=(-1))
-#define yyerrok (yyerrflag=0)
-#define YYRECOVERING (yyerrflag!=0)
-#define YYPREFIX "yy"
-#line 2 "yacc_config.y"
-/*
- * yacc_config.y 1.53 2001/08/24 12:21:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#include <stdlib.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <string.h>
-#include <syslog.h>
-#include <sys/types.h>
-
-#include <pcmcia_/cs_types.h>
-#include <pcmcia_/cs.h>
-#include <pcmcia_/cistpl.h>
-#include <pcmcia_/ds.h>
-
-#include "cardmgr.h"
-
-/* If bison: generate nicer error messages */
-#define YYERROR_VERBOSE 1
-
-/* from lex_config, for nice error messages */
-extern char *current_file;
-extern int current_lineno;
-
-void yyerror(char *msg, ...);
-
-static int add_binding(card_info_t *card, char *name, int fn);
-static int add_module(device_info_t *card, char *name);
-
-#line 65 "yacc_config.y"
-typedef union {
- char *str;
- u_long num;
- struct device_info_t *device;
- struct card_info_t *card;
- struct mtd_ident_t *mtd;
- struct adjust_list_t *adjust;
-} YYSTYPE;
-#line 77 "y.tab.c"
-#define DEVICE 257
-#define CARD 258
-#define ANONYMOUS 259
-#define TUPLE 260
-#define MANFID 261
-#define VERSION 262
-#define FUNCTION 263
-#define PCI 264
-#define BIND 265
-#define CIS 266
-#define TO 267
-#define NEEDS_MTD 268
-#define MODULE 269
-#define OPTS 270
-#define CLASS 271
-#define REGION 272
-#define JEDEC 273
-#define DTYPE 274
-#define DEFAULT 275
-#define MTD 276
-#define INCLUDE 277
-#define EXCLUDE 278
-#define RESERVE 279
-#define IRQ_NO 280
-#define PORT 281
-#define MEMORY 282
-#define STRING 283
-#define NUMBER 284
-#define YYERRCODE 256
-short yylhs[] = { -1,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1,
- 1, 1, 2, 2, 2, 3, 3, 3, 3, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 8, 9,
- 10, 11, 12, 12, 13, 15, 14, 14, 14, 14,
- 4, 21, 5, 5, 5, 6, 16, 16, 16, 16,
- 18, 17, 19, 20, 20, 22,
-};
-short yylen[] = { 2,
- 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 3, 2, 4, 4, 2, 1, 1, 1, 2,
- 1, 1, 1, 1, 1, 1, 1, 1, 2, 7,
- 5, 5, 3, 3, 3, 3, 3, 5, 3, 5,
- 2, 4, 3, 3, 3, 3, 2, 1, 1, 1,
- 3, 4, 2, 3, 3, 4,
-};
-short yydefred[] = { 1,
- 0, 8, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 17, 0, 19, 0, 21, 22, 23, 24,
- 0, 26, 0, 28, 0, 49, 48, 50, 0, 6,
- 7, 16, 20, 0, 47, 0, 0, 0, 0, 9,
- 10, 11, 0, 41, 0, 0, 0, 0, 29, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 53, 0, 0, 0, 0, 13, 0, 0, 12, 43,
- 46, 44, 45, 0, 0, 33, 35, 0, 0, 36,
- 34, 0, 0, 51, 54, 55, 42, 56, 0, 0,
- 0, 0, 0, 0, 0, 52, 14, 15, 0, 31,
- 32, 38, 40, 0, 30,
-};
-short yydgoto[] = { 1,
- 11, 40, 12, 13, 14, 15, 16, 17, 18, 19,
- 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
- 30, 31,
-};
-short yysindex[] = { 0,
- -250, 0, -279, -278, -274, -265, -259, -242, -242, -242,
- -10, -248, 0, -44, 0, -249, 0, 0, 0, 0,
- -9, 0, -3, 0, -243, 0, 0, 0, -233, 0,
- 0, 0, 0, -228, 0, -227, -240, -238, -237, 0,
- 0, 0, -242, 0, -235, -232, -231, -230, 0, -234,
- -229, -226, -225, -224, -222, -221, -220, -219, -218, -217,
- 0, -215, -213, -212, -211, 0, 9, 11, 0, 0,
- 0, 0, 0, 14, 21, 0, 0, 30, -192, 0,
- 0, -191, -207, 0, 0, 0, 0, 0, -206, -205,
- -204, -203, -202, -201, -200, 0, 0, 0, 41, 0,
- 0, 0, 0, -197, 0,
-};
-short yyrindex[] = { 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 107, 149, 0, 90, 0, 124, 0, 0, 0, 0,
- 49, 0, 73, 0, 0, 0, 0, 0, 141, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
- 0, 25, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0,
-};
-short yygindex[] = { 0,
- 0, -7, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0,
-};
-#define YYTABLESIZE 428
-short yytable[] = { 48,
- 37, 41, 42, 32, 33, 2, 3, 4, 34, 49,
- 50, 51, 52, 53, 54, 55, 56, 35, 5, 44,
- 45, 6, 46, 36, 39, 7, 8, 9, 10, 59,
- 60, 61, 62, 43, 57, 69, 63, 37, 38, 39,
- 58, 64, 65, 66, 37, 67, 68, 70, 25, 74,
- 71, 72, 73, 89, 75, 90, 76, 91, 77, 78,
- 79, 80, 81, 82, 92, 83, 84, 85, 39, 86,
- 87, 88, 27, 93, 94, 95, 96, 97, 98, 99,
- 100, 101, 102, 103, 104, 105, 0, 0, 0, 18,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 2, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 5, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 4, 0, 0, 0, 0, 0, 0, 0, 3, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 47, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 37, 37, 37, 37,
- 37, 37, 37, 37, 37, 37, 37, 0, 0, 37,
- 0, 0, 37, 0, 0, 0, 37, 37, 37, 37,
- 39, 39, 39, 39, 39, 39, 39, 39, 39, 39,
- 39, 0, 0, 39, 0, 0, 39, 0, 0, 0,
- 39, 39, 39, 39, 25, 25, 25, 25, 25, 25,
- 25, 25, 25, 25, 25, 0, 0, 25, 0, 0,
- 25, 0, 0, 0, 25, 25, 25, 25, 27, 27,
- 27, 27, 27, 27, 27, 27, 27, 27, 27, 0,
- 0, 27, 0, 0, 27, 18, 18, 18, 27, 27,
- 27, 27, 0, 0, 0, 0, 0, 18, 18, 0,
- 18, 18, 2, 2, 2, 18, 18, 18, 18, 0,
- 0, 0, 0, 0, 0, 2, 0, 0, 2, 5,
- 5, 5, 2, 2, 2, 2, 0, 0, 0, 0,
- 0, 0, 5, 0, 0, 5, 4, 4, 4, 5,
- 5, 5, 5, 0, 3, 3, 3, 0, 0, 4,
- 0, 0, 4, 0, 0, 0, 4, 4, 4, 4,
- 3, 0, 0, 0, 3, 3, 3, 3,
-};
-short yycheck[] = { 44,
- 0, 9, 10, 283, 283, 256, 257, 258, 283, 259,
- 260, 261, 262, 263, 264, 265, 266, 283, 269, 268,
- 269, 272, 271, 283, 0, 276, 277, 278, 279, 273,
- 274, 275, 276, 44, 44, 43, 270, 280, 281, 282,
- 44, 270, 270, 284, 44, 284, 284, 283, 0, 284,
- 283, 283, 283, 45, 284, 45, 283, 44, 284, 284,
- 283, 283, 283, 283, 44, 284, 284, 283, 44, 283,
- 283, 283, 0, 44, 267, 267, 284, 284, 284, 284,
- 284, 284, 284, 284, 44, 283, -1, -1, -1, 0,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, 0, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, 0, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- 0, -1, -1, -1, -1, -1, -1, -1, 0, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, 270, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
- -1, -1, -1, -1, -1, -1, 256, 257, 258, 259,
- 260, 261, 262, 263, 264, 265, 266, -1, -1, 269,
- -1, -1, 272, -1, -1, -1, 276, 277, 278, 279,
- 256, 257, 258, 259, 260, 261, 262, 263, 264, 265,
- 266, -1, -1, 269, -1, -1, 272, -1, -1, -1,
- 276, 277, 278, 279, 256, 257, 258, 259, 260, 261,
- 262, 263, 264, 265, 266, -1, -1, 269, -1, -1,
- 272, -1, -1, -1, 276, 277, 278, 279, 256, 257,
- 258, 259, 260, 261, 262, 263, 264, 265, 266, -1,
- -1, 269, -1, -1, 272, 256, 257, 258, 276, 277,
- 278, 279, -1, -1, -1, -1, -1, 268, 269, -1,
- 271, 272, 256, 257, 258, 276, 277, 278, 279, -1,
- -1, -1, -1, -1, -1, 269, -1, -1, 272, 256,
- 257, 258, 276, 277, 278, 279, -1, -1, -1, -1,
- -1, -1, 269, -1, -1, 272, 256, 257, 258, 276,
- 277, 278, 279, -1, 256, 257, 258, -1, -1, 269,
- -1, -1, 272, -1, -1, -1, 276, 277, 278, 279,
- 272, -1, -1, -1, 276, 277, 278, 279,
-};
-#define YYFINAL 1
-#ifndef YYDEBUG
-#define YYDEBUG 0
-#endif
-#define YYMAXTOKEN 284
-#if YYDEBUG
-char *yyname[] = {
-"end-of-file",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,"','","'-'",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"DEVICE","CARD",
-"ANONYMOUS","TUPLE","MANFID","VERSION","FUNCTION","PCI","BIND","CIS","TO",
-"NEEDS_MTD","MODULE","OPTS","CLASS","REGION","JEDEC","DTYPE","DEFAULT","MTD",
-"INCLUDE","EXCLUDE","RESERVE","IRQ_NO","PORT","MEMORY","STRING","NUMBER",
-};
-char *yyrule[] = {
-"$accept : list",
-"list :",
-"list : list adjust",
-"list : list device",
-"list : list mtd",
-"list : list card",
-"list : list opts",
-"list : list mtd_opts",
-"list : list error",
-"adjust : INCLUDE resource",
-"adjust : EXCLUDE resource",
-"adjust : RESERVE resource",
-"adjust : adjust ',' resource",
-"resource : IRQ_NO NUMBER",
-"resource : PORT NUMBER '-' NUMBER",
-"resource : MEMORY NUMBER '-' NUMBER",
-"device : DEVICE STRING",
-"device : needs_mtd",
-"device : module",
-"device : class",
-"card : CARD STRING",
-"card : anonymous",
-"card : tuple",
-"card : manfid",
-"card : pci",
-"card : version",
-"card : function",
-"card : bind",
-"card : cis",
-"anonymous : card ANONYMOUS",
-"tuple : card TUPLE NUMBER ',' NUMBER ',' STRING",
-"manfid : card MANFID NUMBER ',' NUMBER",
-"pci : card PCI NUMBER ',' NUMBER",
-"version : card VERSION STRING",
-"version : version ',' STRING",
-"function : card FUNCTION NUMBER",
-"cis : card CIS STRING",
-"bind : card BIND STRING",
-"bind : card BIND STRING TO NUMBER",
-"bind : bind ',' STRING",
-"bind : bind ',' STRING TO NUMBER",
-"needs_mtd : device NEEDS_MTD",
-"opts : MODULE STRING OPTS STRING",
-"module : device MODULE STRING",
-"module : module OPTS STRING",
-"module : module ',' STRING",
-"class : device CLASS STRING",
-"region : REGION STRING",
-"region : dtype",
-"region : jedec",
-"region : default",
-"dtype : region DTYPE NUMBER",
-"jedec : region JEDEC NUMBER NUMBER",
-"default : region DEFAULT",
-"mtd : region MTD STRING",
-"mtd : mtd OPTS STRING",
-"mtd_opts : MTD STRING OPTS STRING",
-};
-#endif
-#ifdef YYSTACKSIZE
-#undef YYMAXDEPTH
-#define YYMAXDEPTH YYSTACKSIZE
-#else
-#ifdef YYMAXDEPTH
-#define YYSTACKSIZE YYMAXDEPTH
-#else
-#define YYSTACKSIZE 500
-#define YYMAXDEPTH 500
-#endif
-#endif
-int yydebug;
-int yynerrs;
-int yyerrflag;
-int yychar;
-short *yyssp;
-YYSTYPE *yyvsp;
-YYSTYPE yyval;
-YYSTYPE yylval;
-short yyss[YYSTACKSIZE];
-YYSTYPE yyvs[YYSTACKSIZE];
-#define yystacksize YYSTACKSIZE
-#line 468 "yacc_config.y"
-void yyerror(char *msg, ...)
-{
- va_list ap;
- char str[256];
-
- va_start(ap, msg);
- sprintf(str, "config error, file '%s' line %d: ",
- current_file, current_lineno);
- vsprintf(str+strlen(str), msg, ap);
-#if YYDEBUG
- fprintf(stderr, "%s\n", str);
-#else
- syslog(LOG_ERR, "%s", str);
-#endif
- va_end(ap);
-}
-
-static int add_binding(card_info_t *card, char *name, int fn)
-{
- device_info_t *dev = root_device;
- if (card->bindings == MAX_BINDINGS) {
- yyerror("too many bindings\n");
- return -1;
- }
- for (; dev; dev = dev->next)
- if (strcmp((char *)dev->dev_info, name) == 0) break;
- if (dev == NULL) {
- yyerror("unknown device: %s", name);
- return -1;
- }
- card->device[card->bindings] = dev;
- card->dev_fn[card->bindings] = fn;
- card->bindings++;
- free(name);
- return 0;
-}
-
-static int add_module(device_info_t *dev, char *name)
-{
- if (dev->modules == MAX_MODULES) {
- yyerror("too many modules");
- return -1;
- }
- dev->module[dev->modules] = name;
- dev->opts[dev->modules] = NULL;
- dev->modules++;
- return 0;
-}
-
-#if YYDEBUG
-adjust_list_t *root_adjust = NULL;
-device_info_t *root_device = NULL;
-card_info_t *root_card = NULL, *blank_card = NULL, *root_func = NULL;
-mtd_ident_t *root_mtd = NULL, *default_mtd = NULL;
-
-void main(int argc, char *argv[])
-{
- yydebug = 1;
- if (argc > 1)
- parse_configfile(argv[1]);
-}
-#endif
-#line 426 "y.tab.c"
-#define YYABORT goto yyabort
-#define YYREJECT goto yyabort
-#define YYACCEPT goto yyaccept
-#define YYERROR goto yyerrlab
-int yylex(void);
-int
-yyparse()
-{
- register int yym, yyn, yystate;
-#if YYDEBUG
- register char *yys;
- extern char *getenv();
-
- if (yys = getenv("YYDEBUG"))
- {
- yyn = *yys;
- if (yyn >= '0' && yyn <= '9')
- yydebug = yyn - '0';
- }
-#endif
-
- yynerrs = 0;
- yyerrflag = 0;
- yychar = (-1);
-
- yyssp = yyss;
- yyvsp = yyvs;
- *yyssp = yystate = 0;
-
-yyloop:
- if ((yyn = yydefred[yystate])) goto yyreduce;
- if (yychar < 0)
- {
- if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
- if (yydebug)
- {
- yys = 0;
- if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
- if (!yys) yys = "illegal-symbol";
- printf("%sdebug: state %d, reading %d (%s)\n",
- YYPREFIX, yystate, yychar, yys);
- }
-#endif
- }
- if ((yyn = yysindex[yystate]) && (yyn += yychar) >= 0 &&
- yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
- {
-#if YYDEBUG
- if (yydebug)
- printf("%sdebug: state %d, shifting to state %d\n",
- YYPREFIX, yystate, yytable[yyn]);
-#endif
- if (yyssp >= yyss + yystacksize - 1)
- {
- goto yyoverflow;
- }
- *++yyssp = yystate = yytable[yyn];
- *++yyvsp = yylval;
- yychar = (-1);
- if (yyerrflag > 0) --yyerrflag;
- goto yyloop;
- }
- if ((yyn = yyrindex[yystate]) && (yyn += yychar) >= 0 &&
- yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
- {
- yyn = yytable[yyn];
- goto yyreduce;
- }
- if (yyerrflag) goto yyinrecovery;
- yyerror("syntax error");
-#ifdef lint
- goto yyerrlab;
-#endif
-yyerrlab:
- ++yynerrs;
-yyinrecovery:
- if (yyerrflag < 3)
- {
- yyerrflag = 3;
- for (;;)
- {
- if ((yyn = yysindex[*yyssp]) && (yyn += YYERRCODE) >= 0 &&
- yyn <= YYTABLESIZE && yycheck[yyn] == YYERRCODE)
- {
-#if YYDEBUG
- if (yydebug)
- printf("%sdebug: state %d, error recovery shifting\
- to state %d\n", YYPREFIX, *yyssp, yytable[yyn]);
-#endif
- if (yyssp >= yyss + yystacksize - 1)
- {
- goto yyoverflow;
- }
- *++yyssp = yystate = yytable[yyn];
- *++yyvsp = yylval;
- goto yyloop;
- }
- else
- {
-#if YYDEBUG
- if (yydebug)
- printf("%sdebug: error recovery discarding state %d\n",
- YYPREFIX, *yyssp);
-#endif
- if (yyssp <= yyss) goto yyabort;
- --yyssp;
- --yyvsp;
- }
- }
- }
- else
- {
- if (yychar == 0) goto yyabort;
-#if YYDEBUG
- if (yydebug)
- {
- yys = 0;
- if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
- if (!yys) yys = "illegal-symbol";
- printf("%sdebug: state %d, error recovery discards token %d (%s)\n",
- YYPREFIX, yystate, yychar, yys);
- }
-#endif
- yychar = (-1);
- goto yyloop;
- }
-yyreduce:
-#if YYDEBUG
- if (yydebug)
- printf("%sdebug: state %d, reducing by rule %d (%s)\n",
- YYPREFIX, yystate, yyn, yyrule[yyn]);
-#endif
- yym = yylen[yyn];
- yyval = yyvsp[1-yym];
- switch (yyn)
- {
-case 2:
-#line 84 "yacc_config.y"
-{
- adjust_list_t **tail = &root_adjust;
- while (*tail != NULL) tail = &(*tail)->next;
- *tail = yyvsp[0].adjust;
- }
-break;
-case 3:
-#line 90 "yacc_config.y"
-{
- yyvsp[0].device->next = root_device;
- root_device = yyvsp[0].device;
- }
-break;
-case 4:
-#line 95 "yacc_config.y"
-{
- if (yyvsp[0].mtd->mtd_type == 0) {
- yyerror("no ID method for this card");
- YYERROR;
- }
- if (yyvsp[0].mtd->module == NULL) {
- yyerror("no MTD module specified");
- YYERROR;
- }
- yyvsp[0].mtd->next = root_mtd;
- root_mtd = yyvsp[0].mtd;
- }
-break;
-case 5:
-#line 108 "yacc_config.y"
-{
- if (yyvsp[0].card->ident_type == 0) {
- yyerror("no ID method for this card");
- YYERROR;
- }
- if (yyvsp[0].card->bindings == 0) {
- yyerror("no function bindings");
- YYERROR;
- }
- if (yyvsp[0].card->ident_type == FUNC_IDENT) {
- yyvsp[0].card->next = root_func;
- root_func = yyvsp[0].card;
- } else {
- yyvsp[0].card->next = root_card;
- root_card = yyvsp[0].card;
- }
- }
-break;
-case 9:
-#line 131 "yacc_config.y"
-{
- yyvsp[0].adjust->adj.Action = ADD_MANAGED_RESOURCE;
- yyval.adjust = yyvsp[0].adjust;
- }
-break;
-case 10:
-#line 136 "yacc_config.y"
-{
- yyvsp[0].adjust->adj.Action = REMOVE_MANAGED_RESOURCE;
- yyval.adjust = yyvsp[0].adjust;
- }
-break;
-case 11:
-#line 141 "yacc_config.y"
-{
- yyvsp[0].adjust->adj.Action = ADD_MANAGED_RESOURCE;
- yyvsp[0].adjust->adj.Attributes |= RES_RESERVED;
- yyval.adjust = yyvsp[0].adjust;
- }
-break;
-case 12:
-#line 147 "yacc_config.y"
-{
- yyvsp[0].adjust->adj.Action = yyvsp[-2].adjust->adj.Action;
- yyvsp[0].adjust->adj.Attributes = yyvsp[-2].adjust->adj.Attributes;
- yyvsp[0].adjust->next = yyvsp[-2].adjust;
- yyval.adjust = yyvsp[0].adjust;
- }
-break;
-case 13:
-#line 156 "yacc_config.y"
-{
- yyval.adjust = calloc(sizeof(adjust_list_t), 1);
- yyval.adjust->adj.Resource = RES_IRQ;
- yyval.adjust->adj.resource.irq.IRQ = yyvsp[0].num;
- }
-break;
-case 14:
-#line 162 "yacc_config.y"
-{
- if ((yyvsp[0].num < yyvsp[-2].num) || (yyvsp[0].num > 0xffff)) {
- yyerror("invalid port range");
- YYERROR;
- }
- yyval.adjust = calloc(sizeof(adjust_list_t), 1);
- yyval.adjust->adj.Resource = RES_IO_RANGE;
- yyval.adjust->adj.resource.io.BasePort = yyvsp[-2].num;
- yyval.adjust->adj.resource.io.NumPorts = yyvsp[0].num - yyvsp[-2].num + 1;
- }
-break;
-case 15:
-#line 173 "yacc_config.y"
-{
- if (yyvsp[0].num < yyvsp[-2].num) {
- yyerror("invalid address range");
- YYERROR;
- }
- yyval.adjust = calloc(sizeof(adjust_list_t), 1);
- yyval.adjust->adj.Resource = RES_MEMORY_RANGE;
- yyval.adjust->adj.resource.memory.Base = yyvsp[-2].num;
- yyval.adjust->adj.resource.memory.Size = yyvsp[0].num - yyvsp[-2].num + 1;
- }
-break;
-case 16:
-#line 186 "yacc_config.y"
-{
- yyval.device = calloc(sizeof(device_info_t), 1);
- yyval.device->refs = 1;
- strcpy(yyval.device->dev_info, yyvsp[0].str);
- free(yyvsp[0].str);
- }
-break;
-case 20:
-#line 198 "yacc_config.y"
-{
- yyval.card = calloc(sizeof(card_info_t), 1);
- yyval.card->refs = 1;
- yyval.card->name = yyvsp[0].str;
- }
-break;
-case 29:
-#line 214 "yacc_config.y"
-{
- if (yyvsp[-1].card->ident_type != 0) {
- yyerror("ID method already defined");
- YYERROR;
- }
- if (blank_card) {
- yyerror("Anonymous card already defined");
- YYERROR;
- }
- yyvsp[-1].card->ident_type = BLANK_IDENT;
- blank_card = yyvsp[-1].card;
- }
-break;
-case 30:
-#line 229 "yacc_config.y"
-{
- if (yyvsp[-6].card->ident_type != 0) {
- yyerror("ID method already defined");
- YYERROR;
- }
- yyvsp[-6].card->ident_type = TUPLE_IDENT;
- yyvsp[-6].card->id.tuple.code = yyvsp[-4].num;
- yyvsp[-6].card->id.tuple.ofs = yyvsp[-2].num;
- yyvsp[-6].card->id.tuple.info = yyvsp[0].str;
- }
-break;
-case 31:
-#line 242 "yacc_config.y"
-{
- if (yyvsp[-4].card->ident_type & EXCL_IDENT) {
- yyerror("ID method already defined");
- YYERROR;
- }
- yyvsp[-4].card->ident_type = MANFID_IDENT;
- yyvsp[-4].card->manfid.manf = yyvsp[-2].num;
- yyvsp[-4].card->manfid.card = yyvsp[0].num;
- }
-break;
-case 32:
-#line 253 "yacc_config.y"
-{
- if (yyvsp[-4].card->ident_type != 0) {
- yyerror("ID method already defined");
- YYERROR;
- }
- yyvsp[-4].card->ident_type = PCI_IDENT;
- yyvsp[-4].card->manfid.manf = yyvsp[-2].num;
- yyvsp[-4].card->manfid.card = yyvsp[0].num;
- }
-break;
-case 33:
-#line 264 "yacc_config.y"
-{
- if (yyvsp[-2].card->ident_type & EXCL_IDENT) {
- yyerror("ID method already defined\n");
- YYERROR;
- }
- yyvsp[-2].card->ident_type = VERS_1_IDENT;
- yyvsp[-2].card->id.vers.ns = 1;
- yyvsp[-2].card->id.vers.pi[0] = yyvsp[0].str;
- }
-break;
-case 34:
-#line 274 "yacc_config.y"
-{
- if (yyvsp[-2].card->id.vers.ns == 4) {
- yyerror("too many version strings");
- YYERROR;
- }
- yyvsp[-2].card->id.vers.pi[yyvsp[-2].card->id.vers.ns] = yyvsp[0].str;
- yyvsp[-2].card->id.vers.ns++;
- }
-break;
-case 35:
-#line 285 "yacc_config.y"
-{
- if (yyvsp[-2].card->ident_type != 0) {
- yyerror("ID method already defined\n");
- YYERROR;
- }
- yyvsp[-2].card->ident_type = FUNC_IDENT;
- yyvsp[-2].card->id.func.funcid = yyvsp[0].num;
- }
-break;
-case 36:
-#line 296 "yacc_config.y"
-{ yyvsp[-2].card->cis_file = strdup(yyvsp[0].str); }
-break;
-case 37:
-#line 300 "yacc_config.y"
-{
- if (add_binding(yyvsp[-2].card, yyvsp[0].str, 0) != 0)
- YYERROR;
- }
-break;
-case 38:
-#line 305 "yacc_config.y"
-{
- if (add_binding(yyvsp[-4].card, yyvsp[-2].str, yyvsp[0].num) != 0)
- YYERROR;
- }
-break;
-case 39:
-#line 310 "yacc_config.y"
-{
- if (add_binding(yyvsp[-2].card, yyvsp[0].str, 0) != 0)
- YYERROR;
- }
-break;
-case 40:
-#line 315 "yacc_config.y"
-{
- if (add_binding(yyvsp[-4].card, yyvsp[-2].str, yyvsp[0].num) != 0)
- YYERROR;
- }
-break;
-case 41:
-#line 322 "yacc_config.y"
-{
- yyvsp[-1].device->needs_mtd = 1;
- }
-break;
-case 42:
-#line 328 "yacc_config.y"
-{
- device_info_t *d;
- int i, found = 0;
- for (d = root_device; d; d = d->next) {
- for (i = 0; i < d->modules; i++)
- if (strcmp(yyvsp[-2].str, d->module[i]) == 0) break;
- if (i < d->modules) {
- if (d->opts[i])
- free(d->opts[i]);
- d->opts[i] = strdup(yyvsp[0].str);
- found = 1;
- }
- }
- free(yyvsp[-2].str); free(yyvsp[0].str);
- if (!found) {
- yyerror("module name not found!");
- YYERROR;
- }
- }
-break;
-case 43:
-#line 350 "yacc_config.y"
-{
- if (add_module(yyvsp[-2].device, yyvsp[0].str) != 0)
- YYERROR;
- }
-break;
-case 44:
-#line 355 "yacc_config.y"
-{
- if (yyvsp[-2].device->opts[yyvsp[-2].device->modules-1] == NULL) {
- yyvsp[-2].device->opts[yyvsp[-2].device->modules-1] = yyvsp[0].str;
- } else {
- yyerror("too many options");
- YYERROR;
- }
- }
-break;
-case 45:
-#line 364 "yacc_config.y"
-{
- if (add_module(yyvsp[-2].device, yyvsp[0].str) != 0)
- YYERROR;
- }
-break;
-case 46:
-#line 371 "yacc_config.y"
-{
- if (yyvsp[-2].device->class != NULL) {
- yyerror("extra class string");
- YYERROR;
- }
- yyvsp[-2].device->class = yyvsp[0].str;
- }
-break;
-case 47:
-#line 381 "yacc_config.y"
-{
- yyval.mtd = calloc(sizeof(mtd_ident_t), 1);
- yyval.mtd->refs = 1;
- yyval.mtd->name = yyvsp[0].str;
- }
-break;
-case 51:
-#line 392 "yacc_config.y"
-{
- if (yyvsp[-2].mtd->mtd_type != 0) {
- yyerror("ID method already defined");
- YYERROR;
- }
- yyvsp[-2].mtd->mtd_type = DTYPE_MTD;
- yyvsp[-2].mtd->dtype = yyvsp[0].num;
- }
-break;
-case 52:
-#line 403 "yacc_config.y"
-{
- if (yyvsp[-3].mtd->mtd_type != 0) {
- yyerror("ID method already defined");
- YYERROR;
- }
- yyvsp[-3].mtd->mtd_type = JEDEC_MTD;
- yyvsp[-3].mtd->jedec_mfr = yyvsp[-1].num;
- yyvsp[-3].mtd->jedec_info = yyvsp[0].num;
- }
-break;
-case 53:
-#line 415 "yacc_config.y"
-{
- if (yyvsp[-1].mtd->mtd_type != 0) {
- yyerror("ID method already defined");
- YYERROR;
- }
- if (default_mtd) {
- yyerror("Default MTD already defined");
- YYERROR;
- }
- yyvsp[-1].mtd->mtd_type = DEFAULT_MTD;
- default_mtd = yyvsp[-1].mtd;
- }
-break;
-case 54:
-#line 430 "yacc_config.y"
-{
- if (yyvsp[-2].mtd->module != NULL) {
- yyerror("extra MTD entry");
- YYERROR;
- }
- yyvsp[-2].mtd->module = yyvsp[0].str;
- }
-break;
-case 55:
-#line 438 "yacc_config.y"
-{
- if (yyvsp[-2].mtd->opts == NULL) {
- yyvsp[-2].mtd->opts = yyvsp[0].str;
- } else {
- yyerror("too many options");
- YYERROR;
- }
- }
-break;
-case 56:
-#line 449 "yacc_config.y"
-{
- mtd_ident_t *m;
- int found = 0;
- for (m = root_mtd; m; m = m->next)
- if (strcmp(yyvsp[-2].str, m->module) == 0) break;
- if (m) {
- if (m->opts) free(m->opts);
- m->opts = strdup(yyvsp[0].str);
- found = 1;
- }
- free(yyvsp[-2].str); free(yyvsp[0].str);
- if (!found) {
- yyerror("MTD name not found!");
- YYERROR;
- }
- }
-break;
-#line 966 "y.tab.c"
- }
- yyssp -= yym;
- yystate = *yyssp;
- yyvsp -= yym;
- yym = yylhs[yyn];
- if (yystate == 0 && yym == 0)
- {
-#if YYDEBUG
- if (yydebug)
- printf("%sdebug: after reduction, shifting from state 0 to\
- state %d\n", YYPREFIX, YYFINAL);
-#endif
- yystate = YYFINAL;
- *++yyssp = YYFINAL;
- *++yyvsp = yyval;
- if (yychar < 0)
- {
- if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
- if (yydebug)
- {
- yys = 0;
- if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
- if (!yys) yys = "illegal-symbol";
- printf("%sdebug: state %d, reading %d (%s)\n",
- YYPREFIX, YYFINAL, yychar, yys);
- }
-#endif
- }
- if (yychar == 0) goto yyaccept;
- goto yyloop;
- }
- if ((yyn = yygindex[yym]) && (yyn += yystate) >= 0 &&
- yyn <= YYTABLESIZE && yycheck[yyn] == yystate)
- yystate = yytable[yyn];
- else
- yystate = yydgoto[yym];
-#if YYDEBUG
- if (yydebug)
- printf("%sdebug: after reduction, shifting from state %d \
-to state %d\n", YYPREFIX, *yyssp, yystate);
-#endif
- if (yyssp >= yyss + yystacksize - 1)
- {
- goto yyoverflow;
- }
- *++yyssp = yystate;
- *++yyvsp = yyval;
- goto yyloop;
-yyoverflow:
- yyerror("yacc stack overflow");
-yyabort:
- return (1);
-yyaccept:
- return (0);
-}
diff --git a/mdk-stage1/pcmcia_/yacc_config.h b/mdk-stage1/pcmcia_/yacc_config.h
deleted file mode 100644
index b4902c8e6..000000000
--- a/mdk-stage1/pcmcia_/yacc_config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#define DEVICE 257
-#define CARD 258
-#define ANONYMOUS 259
-#define TUPLE 260
-#define MANFID 261
-#define VERSION 262
-#define FUNCTION 263
-#define PCI 264
-#define BIND 265
-#define CIS 266
-#define TO 267
-#define NEEDS_MTD 268
-#define MODULE 269
-#define OPTS 270
-#define CLASS 271
-#define REGION 272
-#define JEDEC 273
-#define DTYPE 274
-#define DEFAULT 275
-#define MTD 276
-#define INCLUDE 277
-#define EXCLUDE 278
-#define RESERVE 279
-#define IRQ_NO 280
-#define PORT 281
-#define MEMORY 282
-#define STRING 283
-#define NUMBER 284
-typedef union {
- char *str;
- u_long num;
- struct device_info_t *device;
- struct card_info_t *card;
- struct mtd_ident_t *mtd;
- struct adjust_list_t *adjust;
-} YYSTYPE;
-extern YYSTYPE yylval;
diff --git a/mdk-stage1/ppp/.cvsignore b/mdk-stage1/ppp/.cvsignore
deleted file mode 100644
index c258b925d..000000000
--- a/mdk-stage1/ppp/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pppd-bin
diff --git a/mdk-stage1/ppp/Changes-2.3 b/mdk-stage1/ppp/Changes-2.3
deleted file mode 100644
index f5c954b4b..000000000
--- a/mdk-stage1/ppp/Changes-2.3
+++ /dev/null
@@ -1,441 +0,0 @@
-What was new in ppp-2.3.11.
-***************************
-
-* Support for Solaris 8 has been added, including support for
- replumbing and IPV6.
-
-* The Solaris `snoop' utility should now work on ppp interfaces.
-
-* New hooks have been added - pap_logout_hook, ip_up_hook, and
- ip_down_hook.
-
-* A new `passprompt' plugin is included, thanks to Alan Curry, which
- makes it possible for pppd to call an external program to get the
- PAP password to send to the peer.
-
-* The error messages for the situation where authentication is
- required because the system has a default route have been improved.
-
-* There is a new connect_delay option which specifies how long pppd
- should pause after the connect script finishes. Previously this
- delay was fixed at 1 second. (This delay terminates as soon as pppd
- sees a valid PPP frame from the peer.)
-
-* The `hide-password' option is now the default, and there is a new
- `show-password' option to enable the printing of password strings in
- the debug output.
-
-* A fairly complete list of the names of PPP protocols has been added
- so that when pppd rejects a frame because its protocol is not
- supported, it can print the name of the unsupported protocol.
-
-* Synchronous serial lines are supported under Linux 2.3.x.
-
-* The bug where pppd would not recognize a modem hangup under Linux
- 2.3.x kernels has been fixed.
-
-
-What was new in ppp-2.3.10.
-***************************
-
-* Pppd now supports `plugins', which are pieces of code (packaged as
- shared libraries) which can be loaded into pppd at runtime and which
- can affect its behaviour. The intention is that plugins provide a
- way for people to customize the behaviour of pppd for their own
- needs without needing to change the base pppd source. I have added
- some hooks into pppd (places where pppd will call a function
- pointer, if non-zero, to replace some of pppd's code) and I will be
- receptive to suggestions about places to add more hooks. Plugins
- are supported under Linux and Solaris at present.
-
-* We have a new maintainer for the Solaris port, Adi Masputra of Sun
- Microsystems, and he has updated the Solaris port so that it should
- work on 64-bit machines under Solaris 7 and later.
-
-* Pppd now has an `allow-ip' option, which takes an argument which is
- an IP address (or subnet) which peers are permitted to use without
- authenticating themselves. The argument takes the same form as each
- element of the allowed IP address list in the secrets files. The
- allow-ip option is privileged and may be specified multiple times.
- Using the allow-ip option should be cleaner than putting a line like
- `"" * "" address' in /etc/ppp/pap-secrets.
-
-* Chat can now substitute environment variables into the script. This
- is enabled by the -E flag. (Thanks to Andreas Arens for the patch.)
-
-* If the PAP username and password from the peer contains unprintable
- characters, they will be translated to a printable form before
- looking in the pap-secrets file. Characters >= 0x80 are translated
- to a M- form, and characters from 0 to 0x1f (and 0x7f as well) are
- translated to a ^X form. If this change causes you grief, let me
- know what would be a better translation. It appears that some peers
- send nulls or other control characters in their usernames and
- passwords.
-
-* Pppd has new `ktune' and `noktune' options, which enable/disable
- it to change kernel settings as appropriate. This is only
- implemented under Linux, and requires the /proc filesystem to be
- mounted. Under Linux, with the ktune option, pppd will enable IP
- forwarding in the kernel if the proxyarp option is used, and will
- enable the dynamic IP address kernel option in demand mode if the
- local IP address changes.
-
-* Pppd no longer requires a remote address to be specified for demand
- dialling. If none is specified, it will use a default value of
- 10.112.112.112+unit_number. (It will not propose this default to
- the peer.)
-
-* The default holdoff is now 0 if no connect script is given.
-
-* The IPV6 code from Tommi Komulainen, which I unfortunately only
- partially merged in to ppp-2.3.9, has been fixed and updated.
-
-* The linux compilation glitches should be fixed now.
-
-
-What was new in ppp-2.3.9.
-**************************
-
-* Support for the new generic PPP layer under development for the
- Linux kernel.
-
-* You can now place extra options to apply to specific users at the
- end of the line with their password in the pap-secrets or
- chap-secrets file, separated from the IP address(es) with a "--"
- separator. These options are parsed after the peer is authenticated
- but before network protocol (IPCP, IPXCP) or CCP negotiation
- commences.
-
-* Pppd will apply the holdoff period if the link was terminated by the
- peer. It doesn't apply it if the link was terminated because the
- local pppd thought it was idle.
-
-* Synchronous support for Solaris has been added, thanks to John
- Morrison, and for FreeBSD, thanks to Paul Fulghum.
-
-* IPV6 support has been merged in, from Tommi Komulainen. At the
- moment it only supports Linux and it is not tested by me.
-
-* The `nodefaultip' option can be used in demand mode to say that pppd
- should not suggest its local IP address to the peer.
-
-* The `init' option has been added; this causes pppd to run a script
- to initialize the serial device (e.g. by sending an init string to
- the modem). Unlike the connect option, this can be used in a
- dial-in situation. (Thanks to Tobias Ringstrom.)
-
-* There is a new `logfile' option to send log messages to a file as
- well as syslog.
-
-* There is a new, privileged `linkname' option which sets a logical
- name for the link. Pppd will create a /var/run/ppp-<linkname>.pid
- file containing its process ID.
-
-* There is a new `maxfail' option which specifies how many consecutive
- failed connection attempts are permitted before pppd will exit. The
- default value is 10, and 0 means infinity. :-)
-
-* Sundry bugs fixed.
-
-
-What was new in ppp-2.3.8.
-**************************
-
-* The exit status of pppd will now indicate whether the link was
- successfully established, or if not, what error was encountered.
-
-* Pppd has two new options: fdlog <n> will send log messages to file
- descriptor <n> instead of standard output, and nofdlog will stop log
- messages from being sent to any file descriptor (they will still be
- sent to syslog). Pppd now will not send log messages to a file
- descriptor if the serial port is open on that file descriptor.
-
-* Pppd sets an environment variable called PPPLOGNAME for scripts that
- it runs, indicating the login name of the user who invoked pppd.
-
-* Pppd sets environment variables CONNECT_TIME, BYTES_SENT and
- BYTES_RCVD for the ip-down and auth-down scripts indicating the
- statistics for the connection just terminated. (CONNECT_TIME is in
- seconds.)
-
-* If the user has the serial device open on standard input and
- specifies a symbolic link to the serial device on the command line,
- pppd will detect this and behave correctly (i.e. not detach from its
- controlling terminal). Furthermore, if the serial port is open for
- reading and writing on standard input, pppd will assume that it is
- locked by its invoker and not lock it itself.
-
-* Chat now has a feature where if a string to be sent begins with an
- at sign (@), the rest of the string is taken as the name of a file
- (regular file or named pipe), and the actual string to send is taken
- from that file.
-
-* Support for FreeBSD-2.2.8 and 3.0 has been added, thanks to Paul
- Fulghum.
-
-* The Tru64 (aka Digital Unix aka OSF/1) port has been updated.
-
-* The system panics on Solaris SMP systems related to PPP connections
- being established and terminated should no longer occur.
-
-* Fixed quite a few bugs.
-
-
-What was new in ppp-2.3.7.
-**************************
-
-* Pppd can now automatically allocate itself a pseudo-tty to use as
- the serial device. This has made three new options possible:
-
- - `pty script' will run `script' with its standard input and output
- connected to the master side of the pty. For example:
- pppd pty 'ssh -t server.my.net pppd'
- is a basic command for setting up a PPP link (tunnel) over ssh.
- (In practice you may need to specify other options such as IP
- addresses, etc.)
-
- - `notty' tells pppd to communicate over its standard input and
- output, which do not have to be a terminal device.
-
- - `record filename' tells pppd to record all of the characters sent
- and received over the serial device to a file called `filename'.
- The data is recorded in a tagged format with timestamps, which can
- be printed in a readable form with the pppdump program, which is
- included in this distribution.
-
-* Pppd now logs the connect time and number of bytes sent and received
- (at the level of the serial device) when the connection is
- terminated.
-
-* If you use the updetach or nodetach option, pppd will print its
- messages to standard output as well as logging them with syslog
- (provided of course pppd isn't using its standard input or output as
- its serial device).
-
-* There is a new `privgroup groupname' option (a privileged option).
- If the user running pppd is in group `groupname', s/he can use
- privileged options without restriction.
-
-* There is a new `receive-all' option, which causes pppd to accept all
- control characters, even the ones that the peer should be escaping
- (i.e. the receive asyncmap is 0). This is useful with some buggy
- peers.
-
-* The default asyncmap is now 0.
-
-* There is a new `sync' option, currently only implemented under
- Linux, which allows pppd to run on synchronous HDLC devices.
-
-* If a value for the device name or for the connect, disconnect,
- welcome or pty option is given in a privileged option file
- (i.e. /etc/ppp/options or a file loaded with the `call' option), it
- cannot be overridden by a non-privileged user.
-
-* Many bugs have been fixed, notably:
- - signals are not blocked unnecessarily, as they were in 2.3.6.
- - the usepeerdns option should work now.
- - the SPEED environment variable for scripts is set correctly.
- - the /etc/ppp/auth-down script is not run until auth-up completes.
- - the device is opened as root if it is the device on standard
- input.
- - pppd doesn't die with the ioctl(PPPIOCSASYNCMAP) error under linux
- if a hangup occurs at the wrong time.
-
-* Some error messages have been changed to be clearer (I hope :-)
-
-
-What was new in ppp-2.3.6.
-**************************
-
-* Pppd now opens the tty device as the user (rather than as root) if
- the device name was given by the user, i.e. on the command line or
- in the ~/.ppprc file. If the device name was given in
- /etc/ppp/options or in a file loaded with the `call' option, the
- device is opened as root.
-
-* The default behaviour of pppd is now to let a peer which has not
- authenticated itself (e.g. your ISP) use any IP address to which the
- system does not already have a route. (This is currently only
- supported under Linux, Solaris and Digital Unix; on the other
- systems, the peer must now authenticate itself unless the noauth
- option is used.)
-
-* Added new option `usepeerdns', thanks to Nick Walker
- <nickwalker@email.com>. If the peer supplies DNS addresses, these
- will be written to /etc/ppp/resolv.conf. The ip-up script can then
- be used to add these addresses to /etc/resolv.conf if desired (see
- the ip-up.local.add and ip-down.local.add files in the scripts
- directory).
-
-* The Solaris ppp driver should now work correctly on SMP systems.
-
-* Minor corrections so that the code can compile under Solaris 7,
- and under Linux with glibc-2.1.
-
-* The Linux kernel driver has been restructured for improved
- performance.
-
-* Pppd now won't start the ip-down script until the ip-up script has
- finished.
-
-
-What was new in ppp-2.3.5.
-**************************
-
-* Minor corrections to the Digital UNIX and NetBSD ports.
-
-* A workaround to avoid tickling a bug in the `se' serial port driver
-on Sun PCI Ultra machines running Solaris.
-
-* Fixed a bug in the negotiation of the Microsoft WINS server address
-option.
-
-* Fixed a bug in the Linux port where it would fail for kernel
-versions above 2.1.99.
-
-
-What was new in ppp-2.3.4.
-**************************
-
-* The NeXT port has been updated, thanks to Steve Perkins.
-
-* ppp-2.3.4 compiles and works under Solaris 2.6, using either gcc or
-cc.
-
-* With the Solaris, SVR4 and SunOS ports, you can control the choice
-of C compiler, C compiler options, and installation directories by
-editing the svr4/Makedefs or sunos4/Makedefs file.
-
-* Until now, we have been using the number 24 to identify Deflate
-compression in the CCP negotiations, which was the number in the draft
-RFC describing Deflate. The number actually assigned to Deflate is
-26. The code has been changed to use 26, but to allow the use of 24
-for now for backwards compatibility. (This can be disabled with the
-`nodeflatedraft' option to pppd.)
-
-* Fixed some bugs in the linux driver and deflate compressor which
-were causing compression problems, including corrupting long
-incompressible packets sometimes.
-
-* Fixes to the PAM and shadow password support in pppd, from Al
-Longyear and others.
-
-* Pppd now sets some environment variables for scripts it invokes
-(ip-up/down, auth-ip/down), giving information about the connection.
-The variables it sets are PEERNAME, IPLOCAL, IPREMOTE, UID, DEVICE,
-SPEED, and IFNAME.
-
-* Pppd now has an `updetach' option, which will cause it to detach
-from its controlling terminal once the link has come up (i.e. once it
-is available for IP traffic).
-
-
-What was new in ppp-2.3.3.
-**************************
-
-* Fixed compilation problems under SunOS.
-
-* Fixed a bug introduced into chat in 2.3.2, and compilation problems
-introduced into the MS-CHAP implementation in 2.3.2.
-
-* The linux kernel driver has been updated for recent 2.1-series
-kernel changes, and it now will ask kerneld to load compression
-modules when required, if the kernel is configured to support kerneld.
-
-* Pppd should now compile correctly under linux on systems with glibc.
-
-
-What was new in ppp-2.3.2.
-**************************
-
-* In 2.3.1, I made a change which was intended to make pppd able to
-detect loss of CD during or immediately after the connection script
-runs. Unfortunately, this had the side-effect that the connection
-script wouldn't work at all on some systems. This change has been
-reversed.
-
-* Fix compilation problems in the Linux kernel driver.
-
-
-What was new in ppp-2.3.1.
-**************************
-
-* Enhancements to chat, thanks to Francis Demierre. Chat can now
-accept comments in the chat script file, and has new SAY, HANGUP,
-CLR_ABORT and CLR_REPORT keywords.
-
-* Fixed a bug which causes 2.3.0 to crash Solaris systems.
-
-* Bug-fixes and restructuring of the Linux kernel driver.
-
-* The holdoff behaviour of pppd has been changed slightly: now, if
-the link comes up for IP (or other network protocol) traffic, we
-consider that the link has been successfully established, and don't
-enforce the holdoff period after the link goes down.
-
-* Pppd should now correctly wait for CD (carrier detect) from the
-modem, even when the serial port initially had CLOCAL set, and it
-should also detect loss of CD during or immediately after the
-connection script runs.
-
-* Under linux, pppd will work with older 2.2.0* version kernel
-drivers, although demand-dialling is not supported with them.
-
-* Minor bugfixes for pppd.
-
-
-What was new in ppp-2.3.
-************************
-
-* Demand-dialling. Pppd now has a mode where it will establish the
-network interface immediately when it starts, but not actually bring
-the link up until it sees some data to be sent. Look for the demand
-option description in the pppd man page. Demand-dialling is not
-supported under Ultrix or NeXTStep.
-
-* Idle timeout. Pppd will optionally terminate the link if no data
-packets are sent or received within a certain time interval.
-
-* Pppd now runs the /etc/ppp/auth-up script, if it exists, when the
-peer successfully authenticates itself, and /etc/ppp/auth-down when
-the connection is subsequently terminated. This can be useful for
-accounting purposes.
-
-* A new packet compression scheme, Deflate, has been implemented.
-This uses the same compression method as `gzip'. This method is free
-of patent or copyright restrictions, and it achieves better
-compression than BSD-Compress. It does consume more CPU cycles for
-compression than BSD-Compress, but this shouldn't be a problem for
-links running at 100kbit/s or less.
-
-* There is no code in this distribution which is covered by Brad
-Clements' restrictive copyright notice. The STREAMS modules for SunOS
-and OSF/1 have been rewritten, based on the Solaris 2 modules, which
-were written from scratch without any Clements code.
-
-* Pppstats has been reworked to clean up the output format somewhat.
-It also has a new -d option which displays data rate in kbyte/s for
-those columns which would normally display bytes.
-
-* Pppd options beginning with - or + have been renamed, e.g. -ip
-became noip, +chap became require-chap, etc. The old options are
-still accepted for compatibility but may be removed in future.
-
-* Pppd now has some options (such as the new `noauth' option) which
-can only be specified if it is being run by root, or in an
-"privileged" options file: /etc/ppp/options or an options file in the
-/etc/ppp/peers directory. There is a new "call" option to read
-options from a file in /etc/ppp/peers, making it possible for non-root
-users to make unauthenticated connections, but only to certain trusted
-peers. My intention is to make the `auth' option the default in a
-future release.
-
-* Several minor new features have been added to pppd, including the
-maxconnect and welcome options. Pppd will now terminate the
-connection when there are no network control protocols running. The
-allowed IP address(es) field in the secrets files can now specify
-subnets (with a notation like 123.45.67.89/24) and addresses which are
-not acceptable (put a ! on the front).
-
-* Numerous bugs have been fixed (no doubt some have been introduced :-)
-Thanks to those who reported bugs in ppp-2.2.
diff --git a/mdk-stage1/ppp/FAQ b/mdk-stage1/ppp/FAQ
deleted file mode 100644
index 96bc5c708..000000000
--- a/mdk-stage1/ppp/FAQ
+++ /dev/null
@@ -1,634 +0,0 @@
-This is a list of Frequently Asked Questions about using ppp-2.x and
-their answers.
-
-
-------------------------------------------------------------------------
-
-Q: Can you give me an example of how I might set up my machine to dial
-out to an ISP?
-
-A: Here's an example for dialling out to an ISP via a modem on
-/dev/tty02. The modem uses hardware (CTS/RTS) flow control, and the
-serial port is run at 38400 baud. The ISP assigns our IP address.
-
-To configure pppd for this connection, create a file under
-/etc/ppp/peers called (say) my-isp containing the following:
-
-tty02 crtscts 38400
-connect 'chat -v -f /etc/ppp/chat/my-isp'
-defaultroute
-
-The ppp connection is then initiated using the following command:
-
-pppd call my-isp
-
-Of course, if the directory containing pppd is not in your path, you
-will need to give the full pathname for pppd, for example,
-/usr/sbin/pppd.
-
-When you run this, pppd will use the chat program to dial the ISP and
-invoke its ppp service. Chat will read the file specified with -f,
-namely /etc/ppp/chat/my-isp, to find a list of strings to expect to
-receive, and strings to send. This file would contain something like
-this:
-
-ABORT "NO CARRIER"
-ABORT "NO DIALTONE"
-ABORT "ERROR"
-ABORT "NO ANSWER"
-ABORT "BUSY"
-ABORT "Username/Password Incorrect"
-"" "at"
-OK "at&d2&c1"
-OK "atdt2479381"
-"name:" "^Uusername"
-"word:" "\qpassword"
-"annex" "\q^Uppp"
-"Switching to PPP-ppp-Switching to PPP"
-
-You will need to change the details here. The first string on each
-line is a string to expect to receive; the second is the string to
-send. You can add or delete lines according to the dialog required to
-access your ISP's system. This example is for a modem with a standard
-AT command set, dialling out to an Annex terminal server. The \q
-toggles "quiet" mode; when quiet mode is on, the strings to be sent
-are replaced by ?????? in the log. You may need to go through the
-dialog manually using kermit or tip first to determine what should go
-in the script.
-
-To terminate the link, run the following script, called (say)
-kill-ppp:
-
-#!/bin/sh
-unit=ppp${1-0}
-piddir=/var/run
-if [ -f $piddir/$unit.pid ]; then
- kill -1 `cat $piddir/$unit.pid`
-fi
-
-On some systems (SunOS, Solaris, Ultrix), you will need to change
-/var/run to /etc/ppp.
-
-
-------------------------------------------------------------------------
-
-Q: Can you give me an example of how I could set up my office machine
-so I can dial in to it from home?
-
-A: Let's assume that the office machine is called "office" and is on a
-local ethernet subnet. Call the home machine "home" and give it an IP
-address on the same subnet as "office". We'll require both machines
-to authenticate themselves to each other.
-
-Set up the files on "office" as follows:
-
-/etc/ppp/options contains:
-
-auth # require the peer to authenticate itself
-lock
-# other options can go here if desired
-
-/etc/ppp/chap-secrets contains:
-
-home office "beware the frub-jub" home
-office home "bird, my son!%&*" -
-
-Set up a modem on a serial port so that users can dial in to the
-modem and get a login prompt.
-
-On "home", set up the files as follows:
-
-/etc/ppp/options contains the same as on "office".
-
-/etc/ppp/chap-secrets contains:
-
-home office "beware the frub-jub" -
-office home "bird, my son!%&*" office
-
-Create a file called /etc/ppp/peers/office containing the following:
-
-tty02 crtscts 38400
-connect 'chat -v -f /etc/ppp/chat/office'
-defaultroute
-
-(You may need to change some of the details here.)
-
-Create the /etc/ppp/chat/office file containing the following:
-
-ABORT "NO CARRIER"
-ABORT "NO DIALTONE"
-ABORT "ERROR"
-ABORT "NO ANSWER"
-ABORT "BUSY"
-ABORT "ogin incorrect"
-"" "at"
-OK "at&d2&c1"
-OK "atdt2479381"
-"name:" "^Uusername"
-"word:" "\qpassword"
-"$" "\q^U/usr/sbin/pppd proxyarp"
-"~"
-
-You will need to change the details. Note that the "$" in the
-second-last line is expecting the shell prompt after a successful
-login - you may need to change it to "%" or something else.
-
-You then initiate the connection (from home) with the command:
-
-pppd call office
-
-------------------------------------------------------------------------
-
-Q: When I try to establish a connection, the modem successfully dials
-the remote system, but then hangs up a few seconds later. How do I
-find out what's going wrong?
-
-A: There are a number of possible problems here. The first thing to
-do is to ensure that pppd's messages are visible. Pppd uses the
-syslog facility to log messages which help to identify specific
-problems. Messages from pppd have facility "daemon" and levels
-ranging from "debug" to "error".
-
-Usually it is useful to see messages of level "notice" or higher on
-the console. To see these, find the line in /etc/syslog.conf which
-has /dev/console on the right-hand side, and add "daemon.notice" in
-the list on the left. The line will end up looking something like
-this:
-
-*.err;kern.debug;auth.notice;mail.crit;daemon.notice /dev/console
-
-Note that the whitespace is tabs, *not* spaces.
-
-If you are having problems, it may be useful to see messages of level
-"info" as well, in which case you would change "daemon.notice" to
-"daemon.info".
-
-In addition, it is useful to collect pppd's debugging output in a
-file - the debug option to pppd causes it to log the contents of all
-control packets sent and received in human-readable form. To do this,
-add a line like this to /etc/syslog.conf:
-
-daemon,local2.debug /etc/ppp/log
-
-and create an empty /etc/ppp/log file.
-
-When you change syslog.conf, you will need to send a HUP signal to
-syslogd to causes it to re-read syslog.conf. You can do this with a
-command like this (as root):
-
- kill -HUP `cat /etc/syslogd.pid`
-
-(On some systems, you need to use /var/run/syslog.pid instead of
-/etc/syslogd.pid.)
-
-After setting up syslog like this, you can use the -v flag to chat and
-the `debug' option to pppd to get more information. Try initiating
-the connection again; when it fails, inspect /etc/ppp/log to see what
-happened and where the connection failed.
-
-
-------------------------------------------------------------------------
-
-Q: When I try to establish a connection, I get an error message saying
-"Serial link is not 8-bit clean". Why?
-
-A: The most common cause is that your connection script hasn't
-successfully dialled out to the remote system and invoked ppp service
-there. Instead, pppd is talking to something (a shell or login
-process on the remote machine, or maybe just the modem) which is only
-outputting 7-bit characters.
-
-This can also arise with a modem which uses an AT command set if the
-dial command is issued before pppd is invoked, rather than within a
-connect script started by pppd. If the serial port is set to 7
-bits/character plus parity when the last AT command is issued, the
-modem serial port will be set to the same setting.
-
-Note that pppd *always* sets the local serial port to 8 bits per
-character, with no parity and 1 stop bit. So you shouldn't need to
-issue an stty command before invoking pppd.
-
-
-------------------------------------------------------------------------
-
-Q: When I try to establish a connection, I get an error message saying
-"Serial line is looped back". Why?
-
-A: Probably your connection script hasn't successfully dialled out to
-the remote system and invoked ppp service there. Instead, pppd is
-talking to something which is just echoing back the characters it
-receives. The -v option to chat can help you find out what's going
-on. It can be useful to include "~" as the last expect string to
-chat, so chat won't return until it's seen the start of the first PPP
-frame from the remote system.
-
-Another possibility is that your phone connection has dropped for some
-obscure reason and the modem is echoing the characters it receives
-from your system.
-
-
-------------------------------------------------------------------------
-
-Q: I installed pppd successfully, but when I try to run it, I get a
-message saying something like "peer authentication required but no
-authentication files accessible".
-
-A: When pppd is used on a machine which already has a connection to
-the Internet (or to be more precise, one which has a default route in
-its routing table), it will require all peers to authenticate
-themselves. The reason for this is that if you don't require
-authentication, you have a security hole, because the peer can
-basically choose any IP address it wants, even the IP address of some
-trusted host (for example, a host mentioned in some .rhosts file).
-
-On machines which don't have a default route, pppd does not require
-the peer to authenticate itself. The reason is that such machines
-would mostly be using pppd to dial out to an ISP which will refuse to
-authenticate itself. In that case the peer can use any IP address as
-long as the system does not already have a route to that address.
-For example, if you have a local ethernet network, the peer can't use
-an address on that network. (In fact it could if it authenticated
-itself and it was permitted to use that address by the pap-secrets or
-chap-secrets file.)
-
-There are 3 ways around the problem:
-
-1. If possible, arrange for the peer to authenticate itself, and
-create the necessary secrets files (/etc/ppp/pap-secrets and/or
-/etc/ppp/chap-secrets).
-
-2. If the peer refuses to authenticate itself, and will always be
-using the same IP address, or one of a small set of IP addresses, you
-can create an entry in the /etc/ppp/pap-secrets file like this:
-
- "" * "" his-ip.his-domain his-other-ip.other-domain
-
-(that is, using the empty string for the client name and password
-fields). Of couse, you replace the 4th and following fields in the
-example above with the IP address(es) that the peer may use. You can
-use either hostnames or numeric IP addresses.
-
-3. You can add the `noauth' option to the /etc/ppp/options file.
-Pppd will then not ask the peer to authenticate itself. If you do
-this, I *strongly* recommend that you remove the set-uid bit from the
-permissions on the pppd executable, with a command like this:
-
- chmod u-s /usr/sbin/pppd
-
-Then, an intruder could only use pppd maliciously if they had already
-become root, in which case they couldn't do any more damage using pppd
-than they could anyway.
-
-
-------------------------------------------------------------------------
-
-Q: What do I need to put in the secrets files?
-
-A: Three things:
- - secrets (i.e. passwords) to use for authenticating this host to
- other hosts (i.e., for proving our identity to others);
- - secrets which other hosts can use for authenticating themselves
- to us (i.e., so that they can prove their identity to us); and
- - information about which IP addresses other hosts may use, once
- they have authenticated themselves.
-
-There are two authentication files: /etc/ppp/pap-secrets, which
-contains secrets for use with PAP (the Password Authentication
-Protocol), and /etc/ppp/chap-secrets, which contains secrets for use
-with CHAP (the Challenge Handshake Authentication Protocol). Both
-files have the same simple format, which is as follows:
-
-- The file contains a series of entries, each of which contains a
-secret for authenticating one machine to another.
-
-- Each entry is contained on a single logical line. A logical line
-may be continued across several lines by placing a backslash (\) at
-the end of each line except the last.
-
-- Each entry has 3 or more fields, separated by whitespace (spaces
-and/or tabs). These fields are, in order:
- * The name of the machine that is authenticating itself
- (the "client").
- * The name of the machine that is authenticating the client
- (the "server").
- * The secret to be used for authenticating that client to that
- server. If this field begins with the at-sign `@', the rest
- of the field is taken as the name of a file containing the
- actual secret.
- * The 4th and any following fields list the IP address(es)
- that the client may use.
-
-- The file may contain comments, which begin with a `#' and continue
-to the end of the line.
-
-- Double quotes `"' should be used around a field if it contains
-characters with special significance, such as space, tab, `#', etc.
-
-- The backslash `\' may be used before characters with special
-significance (space, tab, `#', `\', etc.) to remove that significance.
-
-Some important points to note:
-
-* A machine can be *both* a "client" and a "server" for the purposes
-of authentication - this happens when both peers require the other to
-authenticate itself. So A would authenticate itself to B, and B would
-also authenticate itself to A (possibly using a different
-authentication protocol).
-
-* If both the "client" and the "server" are running ppp-2.x, they need
-to have a similar entry in the appropriate secrets file; the first two
-fields are *not* swapped on the client, compared to the server. So
-the client might have an entry like this:
-
- ay bee "our little secret" -
-
-and the corresponding entry on the server could look like this:
-
- ay bee "our little secret" 123.45.67.89
-
-
-------------------------------------------------------------------------
-
-Q: Explain about PAP and CHAP?
-
-PAP stands for the Password Authentication Protocol. With this
-protocol, the "client" (the machine that needs to authenticate itself)
-sends its name and a password, in clear text, to the "server". The
-server returns a message indicating whether the name and password are
-valid.
-
-CHAP stands for the Challenge Handshake Authentication Protocol. It
-is designed to address some of the deficiencies and vulnerabilities of
-PAP. Like PAP, it is based on the client and server having a shared
-secret, but the secret is never passed in clear text over the link.
-Instead, the server sends a "challenge" - an arbitrary string of
-bytes, and the client must prove it knows the shared secret by
-generating a hash value from the challenge combined with the shared
-secret, and sending the hash value back to the server. The server
-also generates the hash value and compares it with the value received
-from the client.
-
-At a practical level, CHAP can be slightly easier to configure than
-PAP because the server sends its name with the challenge. Thus, when
-finding the appropriate secret in the secrets file, the client knows
-the server's name. In contrast, with PAP, the client has to find its
-password (i.e. the shared secret) before it has received anything from
-the server. Thus, it may be necessary to use the `remotename' option
-to pppd when using PAP authentication so that it can select the
-appropriate secret from /etc/ppp/pap-secrets.
-
-Microsoft also has a variant of CHAP which uses a different hashing
-arrangement from normal CHAP. There is a client-side implementation
-of Microsoft's CHAP in ppp-2.3; see README.MSCHAP80.
-
-
-------------------------------------------------------------------------
-
-Q: When the modem hangs up, without the remote system having
-terminated the connection properly, pppd does not notice the hangup,
-but just keeps running. How do I get pppd to notice the hangup and
-exit?
-
-A: Pppd detects modem hangup by looking for an end-of-file indication
-from the serial driver, which should be generated when the CD (carrier
-detect) signal on the serial port is deasserted. For this to work:
-
-- The modem has to be set to assert CD when the connection is made and
-deassert it when the phone line hangs up. Usually the AT&C1 modem
-command sets this mode.
-
-- The cable from the modem to the serial port must connect the CD
-signal (on pin 8).
-
-- Some serial drivers have a "software carrier detect" mode, which
-must be *disabled*. The method of doing this varies between systems.
-Under SunOS, use the ttysoftcar command. Under NetBSD, edit /etc/ttys
-to remove the "softcar" flag from the line for the serial port, and
-run ttyflags.
-
-
-------------------------------------------------------------------------
-
-Q: Why should I use PPP compression (BSD-Compress or Deflate) when my
-modem already does V.42 compression? Won't it slow the CPU down a
-lot?
-
-A: Using PPP compression is preferable, especially when using modems
-over phone lines, for the following reasons:
-
-- The V.42 compression in the modem isn't very strong - it's an LZW
-technique (same as BSD-Compress) with a 10, 11 or 12 bit code size.
-With BSD-Compress you can use a code size of up to 15 bits and get
-much better compression, or you can use Deflate and get even better
-compression ratios.
-
-- I have found that enabling V.42 compression in my 14.4k modem
-increases the round-trip time for a character to be sent, echoed and
-returned by around 40ms, from 160ms to 200ms (with error correction
-enabled). This is enough to make it feel less responsive on rlogin or
-telnet sessions. Using PPP compression adds less than 5ms (small
-enough that I couldn't measure it reliably). I admit my modem is a
-cheapie and other modems may well perform better.
-
-- While compression and decompression do require some CPU time, they
-reduce the amount of time spent in the serial driver to transmit a
-given amount of data. Many machines require an interrupt for each
-character sent or received, and the interrupt handler can take a
-significant amount of CPU time. So the increase in CPU load isn't as
-great as you might think. My measurements indicate that a system with
-a 33MHz 486 CPU should be able to do Deflate compression for serial
-link speeds of up to 100kb/s or more. It depends somewhat on the type
-of data, of course; for example, when compressing a string of nulls
-with Deflate, it's hard to get a high output data rate from the
-compressor, simply because it compresses strings of nulls so well that
-it has to eat a very large amount of input data to get each byte of
-output.
-
-
-------------------------------------------------------------------------
-
-Q: I get messages saying "Unsupported protocol (...) received". What do
-these mean?
-
-A: If you only get one or two when pppd starts negotiating with the
-peer, they mean that the peer wanted to negotiate some PPP protocol
-that pppd doesn't understand. This doesn't represent a problem, it
-simply means that there is some functionality that the peer supports
-that pppd doesn't, so that functionality can't be used.
-
-If you get them sporadically while the link is operating, or if the
-protocol numbers (in parentheses) don't correspond to any valid PPP
-protocol that the peer might be using, then the problem is probably
-that characters are getting corrupted on the receive side, or that
-extra characters are being inserted into the receive stream somehow.
-If this is happening, most packets that get corrupted should get
-discarded by the FCS (Frame Check Sequence, a 16-bit CRC) check, but a
-small number may get through.
-
-One possibility may be that you are receiving broadcast messages on
-the remote system which are being sent over your serial link. Another
-possibility is that your modem is set for XON/XOFF (software) flow
-control and is inserting ^Q and ^S characters into the receive data
-stream.
-
-
-------------------------------------------------------------------------
-
-Q: I get messages saying "Protocol-Reject for unsupported protocol ...".
-What do these mean?
-
-A: This is the other side of the previous question. If characters are
-getting corrupted on the way to the peer, or if your system is
-inserting extra bogus characters into the transmit data stream, the
-peer may send protocol-reject messages to you, resulting in the above
-message (since your pppd doesn't recognize the protocol number
-either.)
-
-
-------------------------------------------------------------------------
-
-Q: I get a message saying something like "ioctl(TIOCSETD): Operation
-not permitted". How do I fix this?
-
-A: This is because pppd is not running as root. If you have not
-installed pppd setuid-root, you will have to be root to run it. If
-you have installed pppd setuid-root and you still get this message, it
-is probably because your shell is using some other copy of pppd than
-the installed one - for example, if you are in the pppd directory
-where you've just built pppd and your $PATH has . before /usr/sbin (or
-wherever pppd gets installed).
-
-
-------------------------------------------------------------------------
-
-Q: Has your package been ported to HP/UX or IRIX or AIX?
-
-A: No. I don't have access to systems running HP/UX or AIX. No-one
-has volunteered to port it to HP/UX. I had someone who did a port for
-AIX 4.x, but who is no longer able to maintain it. And apparently AIX
-3.x is quite different, so it would need a separate port.
-
-IRIX includes a good PPP implementation in the standard distribution,
-as far as I know.
-
-
-------------------------------------------------------------------------
-
-Q: Under SunOS 4, when I try to modload the ppp modules, I get the
-message "can't open /dev/vd: No such device".
-
-A: First check in /dev that there is an entry like this:
-
-crw-r--r-- 1 root 57, 0 Oct 2 1991 vd
-
-If not, make one (mknod /dev/vd c 57 0). If the problem still exists,
-probably your kernel has been configured without the vd driver
-included. The vd driver is needed for loadable module support.
-
-First, identify the config file that was used. When you boot your
-machine, or if you run /etc/dmesg, you'll see a line that looks
-something like this:
-
-SunOS Release 4.1.3_U1 (CAP_XBOX) #7: Thu Mar 21 15:31:56 EST 1996
- ^^^^^^^^
- this is the config file name
-
-The config file will be in the /sys/`arch -k`/conf directory (arch -k
-should return sun4m for a SparcStation 10, sun3x for a Sun 3/80,
-etc.). Look in there for a line saying "options VDDRV". If that line
-isn't present (or is commented out), add it (or uncomment it).
-
-You then need to rebuild the kernel as described in the SunOS
-manuals. Basically you need to run config and make like this:
-
- /usr/etc/config CAP_XBOX
- cd ../CAP_XBOX
- make
-
-(replacing the string CAP_XBOX by the name of the config file for your
-kernel, of course).
-
-Then copy the new kernel to /:
-
- mv /vmunix /vmunix.working
- cp vmunix /
-
-and reboot. Modload should then work.
-
-
-------------------------------------------------------------------------
-
-Q: I'm running Linux (or NetBSD or FreeBSD), and my system comes with
-PPP already. Should I consider installing this package? Why?
-
-A: The PPP that is already installed in your system is (or is derived
-from) some version of this PPP package. You can find out what version
-of this package is already installed with the command "pppd --help".
-If this is older than the latest version, you may wish to install the
-latest version so that you can take advantage of the new features or
-bug fixes.
-
-
-------------------------------------------------------------------------
-
-Q: I'm running pppd in demand mode, and I find that pppd often dials
-out unnecessarily when I try to make a connection within my local
-machine or with a machine on my local LAN. What can I do about this?
-
-A: Very often the cause of this is that a program is trying to contact
-a nameserver to resolve a hostname, and the nameserver (specified in
-/etc/resolv.conf, usually) is on the far side of the ppp link. You
-can try executing a command such as `ping myhost' (where myhost is the
-name of the local machine, or some other machine on a local LAN), to
-see whether that starts the ppp link. If it does, check the setup of
-your /etc/hosts file to make sure you have the local machine and any
-hosts on your local LAN listed, and /etc/resolv.conf and/or
-/etc/nsswitch.conf files to make sure you resolve hostnames from
-/etc/hosts if possible before trying to contact a nameserver.
-
-
-------------------------------------------------------------------------
-
-Q: Since I installed ppp-2.3.6, dialin users to my server have been
-getting this message when they run pppd:
-
-peer authentication required but no suitable secret(s) found for
-authenticating any peer to us (ispserver)
-
-A: In 2.3.6, the default is to let an unauthenticated peer only use IP
-addresses to which the machine doesn't already have a route. So on a
-machine with a default route, everyone has to authenticate. If you
-really don't want that, you can put `noauth' in the /etc/ppp/options
-file. Note that there is then no check on who is using which IP
-address. IMHO, this is undesirably insecure, but I guess it may be
-tolerable as long as you don't use any .rhosts files or anything like
-that. I recommend that you require dialin users to authenticate, even
-if just with PAP using their login password (using the `login' option
-to pppd). If you do use `noauth', you should at least have a pppusers
-group and set the permissions on pppd to allow only user and group to
-execute it.
-
-------------------------------------------------------------------------
-
-Q: When running pppd as a dial-in server, I often get the message
-"LCP: timeout sending Config-Requests" from pppd. It seems to be
-random, but dial-out always works fine. What is wrong?
-
-A: Most modern modems auto-detects the speed of the serial line
-between the modem and the computer. This auto-detection occurs when
-the computer sends characters to the modem, when the modem is in
-command mode. It does not occur when the modem is in data mode.
-Thus, if you send commands to the modem at 2400 bps, and then change
-the serial port speed to 115200 bps, the modem will not detect this
-change until something is transmitted from the computer to the modem.
-When running pppd in dial-in mode (i.e. without a connect script),
-pppd sets the speed of the serial port, but does not transmit
-anything. If the modem was already running at the specified speed,
-everything is fine, but if not, you will just receive garbage from the
-modem. To cure this, use an init script such as the following:
-
- pppd ttyS0 115200 modem crtscts init "chat '' AT OK"
-
-To reset the modem and enable auto-answer, use:
-
- pppd ttyS0 115200 modem crtscts init "chat '' ATZ OK ATS0=1 OK"
diff --git a/mdk-stage1/ppp/PLUGINS b/mdk-stage1/ppp/PLUGINS
deleted file mode 100644
index 0eeabe249..000000000
--- a/mdk-stage1/ppp/PLUGINS
+++ /dev/null
@@ -1,131 +0,0 @@
-Starting with version 2.3.10, pppd includes support for `plugins' -
-pieces of code which can be loaded into pppd at runtime and which can
-affect its behaviour in various ways. The idea of plugins is to
-provide a way for people to customize the behaviour of pppd without
-having to either apply local patches to each version or get their
-patches accepted into the standard distribution. My aim is that
-plugins will be able to be used with successive versions of pppd
-without needing to recompile the plugins.
-
-A plugin is a standard shared library object, typically with a name
-ending in .so. They are loaded using the standard dlopen() library
-call, so plugins are only supported on systems which support shared
-libraries and the dlopen call. At present pppd is compiled with
-plugin support only under Linux and Solaris.
-
-Plugins are loaded into pppd using the `plugin' option, which takes
-one argument, the name of a shared object file. The plugin option is
-a privileged option. I suggest that you give the full path name of
-the shared object file; if you don't, it may be possible for
-unscrupulous users to substitute another shared object file for the
-one you mean to load, e.g. by setting the LD_LIBRARY_PATH variable.
-
-Plugins are usually written in C and compiled and linked to a shared
-object file in the appropriate manner for your platform. Using gcc
-under Linux, a plugin called `xyz' could be compiled and linked with
-the following commands:
-
- gcc -c -O xyz.c
- gcc -shared -o xyz.so xyz.o
-
-There are some example plugins in the pppd/plugins directory in the
-ppp distribution. Currently there is one example, minconn.c, which
-implements a `minconnect' option, which specifies a minimum connect
-time before the idle timeout applies.
-
-Plugins can access global variables within pppd, so it is useful for
-them to #include "pppd.h" from the pppd source directory.
-
-Every plugin must contain a global procedure called `plugin_init'.
-This procedure will get called (with no arguments) immediately after
-the plugin is loaded.
-
-Plugins can affect the behaviour of pppd in at least three ways:
-
-1. They can add extra options which pppd will then recognize. This is
- done by calling the add_options() procedure with a pointer to an
- array of option_t structures. The last entry in the array must
- have its name field set to NULL.
-
-2. Pppd contains `hook' variables which are procedure pointers. If a
- given hook is not NULL, pppd will call the procedure it points to
- at the appropriate point in its processing. The plugin can set any
- of these hooks to point to its own procedures. See below for a
- description of the hooks which are currently implemented.
-
-3. Plugin code can call any global procedures and access any global
- variables in pppd.
-
-Here is a list of the currently implemented hooks in pppd.
-
-
-int (*idle_time_hook)(struct ppp_idle *idlep);
-
-The idle_time_hook is called when the link first comes up (i.e. when
-the first network protocol comes up) and at intervals thereafter. On
-the first call, the idlep parameter is NULL, and the return value is
-the number of seconds before pppd should check the link activity, or 0
-if there is to be no idle timeout.
-
-On subsequent calls, idlep points to a structure giving the number of
-seconds since the last packets were sent and received. If the return
-value is > 0, pppd will wait that many seconds before checking again.
-If it is <= 0, that indicates that the link should be terminated due
-to lack of activity.
-
-
-int (*holdoff_hook)(void);
-
-The holdoff_hook is called when an attempt to bring up the link fails,
-or the link is terminated, and the persist or demand option was used.
-It returns the number of seconds that pppd should wait before trying
-to reestablish the link (0 means immediately).
-
-
-int (*pap_check_hook)(void);
-int (*pap_passwd_hook)(char *user, char *passwd);
-int (*pap_auth_hook)(char *user, int userlen,
- char *passwd, int passlen,
- char **msgp, int *msglenp,
- struct wordlist **paddrs,
- struct wordlist **popts);
-
-These hooks are designed to allow a plugin to replace the normal PAP
-password processing in pppd with something different (e.g. contacting
-an external server).
-
-The pap_check_hook is called to check whether there is any possibility
-that the peer could authenticate itself to us. If it returns 1, pppd
-will ask the peer to authenticate itself. If it returns 0, pppd will
-not ask the peer to authenticate itself (but if authentication is
-required, pppd may exit, or terminate the link before network protocol
-negotiation). If it returns -1, pppd will look in the pap-secrets
-file as it would normally.
-
-The pap_passwd_hook is called to determine what username and password
-pppd should use in authenticating itself to the peer with PAP. The
-user string will already be initialized, by the `user' option, the
-`name' option, or from the hostname, but can be changed if necessary.
-MAXNAMELEN bytes of space are available at *user, and MAXSECRETLEN
-bytes of space at *passwd. If this hook returns 0, pppd will use the
-values at *user and *passwd; if it returns -1, pppd will look in the
-pap-secrets file, or use the value from the +ua or password option, as
-it would normally.
-
-The pap_auth_hook is called to determine whether the username and
-password supplied by the peer are valid. user and passwd point to
-null-terminated strings containing the username and password supplied
-by the peer, with non-printable characters converted to a printable
-form. The pap_auth_hook function should set msg to a string to be
-returned to the peer and return 1 if the username/password was valid
-and 0 if not. If the hook returns -1, pppd will look in the
-pap-secrets file as usual.
-
-If the username/password was valid, the hook can set *paddrs to point
-to a wordlist containing the IP address(es) which the peer is
-permitted to use, formatted as in the pap-secrets file. It can also
-set *popts to a wordlist containing any extra options for this user
-which pppd should apply at this point.
-
-
-## $Id$ ##
diff --git a/mdk-stage1/ppp/README b/mdk-stage1/ppp/README
deleted file mode 100644
index aa1e5f9c2..000000000
--- a/mdk-stage1/ppp/README
+++ /dev/null
@@ -1,168 +0,0 @@
-This is the README file for ppp-2.4, a package which implements the
-Point-to-Point Protocol (PPP) to provide Internet connections over
-serial lines.
-
-
-Introduction.
-*************
-
-The Point-to-Point Protocol (PPP) provides a standard way to establish
-a network connection over a serial link. At present, this package
-supports IP and the protocols layered above IP, such as TCP and UDP.
-The Linux and Solaris ports of this package have optional support for
-IPV6; the Linux port of this package also has support for IPX.
-
-This software consists of two parts:
-
-- Kernel code, which establishes a network interface and passes
-packets between the serial port, the kernel networking code and the
-PPP daemon (pppd). This code is implemented using STREAMS modules on
-SunOS 4.x and Solaris, and as a line discipline under Linux and FreeBSD.
-
-- The PPP daemon (pppd), which negotiates with the peer to establish
-the link and sets up the ppp network interface. Pppd includes support
-for authentication, so you can control which other systems may make a
-PPP connection and what IP addresses they may use.
-
-The primary platforms supported by this package are Linux and Solaris.
-Code for SunOS 4.x is included here but is largely untested. I have
-code for NeXTStep, FreeBSD, SVR4, Tru64 (Digital Unix), AIX and Ultrix
-but no active maintainers for these platforms. Code for all of these
-except AIX is included in the ppp-2.3.11 release.
-
-
-Installation.
-*************
-
-The file SETUP contains general information about setting up your
-system for using PPP. There is also a README file for each supported
-system, which contains more specific details for installing PPP on
-that system. The supported systems, and the corresponding README
-files, are:
-
- Linux README.linux
- Solaris 2 README.sol2
- SunOS 4.x README.sunos4
-
-In each case you start by running the ./configure script. This works
-out which operating system you are using and creates symbolic links to
-the appropriate makefiles. You then run `make' to compile the
-user-level code, and (as root) `make install' to install the
-user-level programs pppd, chat and pppstats.
-
-N.B. Since 2.3.0, leaving the permitted IP addresses column of the
-pap-secrets or chap-secrets file empty means that no addresses are
-permitted. You need to put a "*" in that column to allow the peer to
-use any IP address. (This only applies where the peer is
-authenticating itself to you, of course.)
-
-
-What's new in ppp-2.4.1.
-************************
-
-* Pppd can now print out the set of options that are in effect. The
- new `dump' option causes pppd to print out the option values after
- option parsing is complete. The `dryrun' option causes pppd to
- print the options and then exit.
-
-* The option parsing code has been fixed so that options in the
- per-tty options file are parsed correctly, and don't override values
- from the command line in most cases.
-
-* The plugin option now looks in /usr/lib/pppd/<pppd-version> (for
- example, /usr/lib/pppd/2.4.1b1) for shared objects for plugins if
- there is no slash in the plugin name.
-
-* When loading a plugin, pppd will now check the version of pppd for
- which the plugin was compiled, and refuse to load it if it is
- different to pppd's version string. To enable this, the plugin
- source needs to #include "pppd.h" and have a line saying:
- char pppd_version[] = VERSION;
-
-* There is a bug in zlib, discovered by James Carlson, which can cause
- kernel memory corruption if Deflate is used with the lowest setting,
- 8. As a workaround pppd will now insist on using at least 9.
-
-* Pppd should compile on Solaris and SunOS again.
-
-* Pppd should now set the MTU correctly on demand-dialled interfaces.
-
-
-What was new in ppp-2.4.0.
-**************************
-
-* Multilink: this package now allows you to combine multiple serial
- links into one logical link or `bundle', for increased bandwidth and
- reduced latency. This is currently only supported under the
- Linux-2.3.99pre5 or later kernels.
-
-* All the pppd processes running on a system now write information
- into a common database. I used the `tdb' code from samba for this.
-
-* New hooks have been added.
-
-For a list of the changes made during the 2.3 series releases of this
-package, see the Changes-2.3 file.
-
-
-Compression methods.
-********************
-
-This package supports two packet compression methods: Deflate and
-BSD-Compress. Other compression methods which are in common use
-include Predictor, LZS, and MPPC. These methods are not supported for
-two reasons - they are patent-encumbered, and they cause some packets
-to expand slightly, which pppd doesn't currently allow for.
-BSD-Compress is also patent-encumbered (its inclusion in this package
-can be considered a historical anomaly :-) but it doesn't ever expand
-packets. Neither does Deflate, which uses the same algorithm as gzip.
-
-
-Patents.
-********
-
-The BSD-Compress algorithm used for packet compression is the same as
-that used in the Unix "compress" command. It is apparently covered by
-U.S. patents 4,814,746 (owned by IBM) and 4,558,302 (owned by Unisys),
-and corresponding patents in various other countries (but not
-Australia). If this is of concern, you can build the package without
-including BSD-Compress. To do this, edit net/ppp-comp.h to change the
-definition of DO_BSD_COMPRESS to 0. The bsd-comp.c files are then no
-longer needed, so the references to bsd-comp.o may optionally be
-removed from the Makefiles.
-
-
-Contacts.
-*********
-
-The comp.protocols.ppp newsgroup is a useful place to get help if you
-have trouble getting your ppp connections to work. Please do not send
-me questions of the form "please help me get connected to my ISP" -
-I'm sorry, but I simply do not have the time to answer all the
-questions like this that I get.
-
-If you find bugs in this package, please report them to the maintainer
-for the port for the operating system you are using:
-
-Linux Paul Mackerras <paulus@linuxcare.com>
-Solaris 2 James Carlson <james.d.carlson@east.sun.com>
-SunOS 4.x Adi Masputra <adi.masputra@sun.com>
-
-
-Copyrights:
-***********
-
-All of the code can be freely used and redistributed. The individual
-source files each have their own copyright and permission notice; some
-have a BSD-style notice and some are under the GPL.
-
-
-Distribution:
-*************
-
-The primary site for releases of this software is:
-
- ftp://linuxcare.com.au/pub/ppp/
-
-
-($Id$)
diff --git a/mdk-stage1/ppp/README.MSCHAP80 b/mdk-stage1/ppp/README.MSCHAP80
deleted file mode 100644
index d3ed291b7..000000000
--- a/mdk-stage1/ppp/README.MSCHAP80
+++ /dev/null
@@ -1,284 +0,0 @@
-PPP Client Support for Microsoft's CHAP-80
-==========================================
-
-Eric Rosenquist rosenqui@strataware.com
-(updated by Paul Mackerras)
-(updated by Al Longyear)
-(updated by Farrell Woods)
-
-INTRODUCTION
-
-Microsoft has introduced an extension to the Challenge/Handshake
-Authentication Protocol (CHAP) which avoids storing cleartext
-passwords on a server. (Unfortunately, this is not as secure as it
-sounds, because the encrypted password stored on a server can be used
-by a bogus client to gain access to the server just as easily as if
-the password were stored in cleartext.) The details of the Microsoft
-extensions can be found in the document:
-
- <ftp://ftp.microsoft.com/developr/rfc/chapexts.txt>
-
-In short, MS-CHAP is identified as <auth chap 80> since the hex value
-of 80 is used to designate Microsoft's scheme. Standard PPP CHAP uses
-a value of 5. If you enable PPP debugging with the "debug" option and
-see something like the following in your logs, the remote server is
-requesting MS-CHAP:
-
- rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth chap 80> <magic 0x46a3>]
- ^^^^^^^^^^^^
-
-The standard pppd implementation will indicate its lack of support for
-MS-CHAP by NAKing it:
-
- sent [LCP ConfNak id=0x2 <auth chap 05>]
-
-Windows NT Server systems are often configured to "Accept only
-Microsoft Authentication" (this is intended to enhance security). Up
-until now, that meant that you couldn't use this version of PPPD to
-connect to such a system. I've managed to get a client-only
-implementation of MS-CHAP working; it will authenticate itself to
-another system using MS-CHAP, but if you're using PPPD as a dial-in
-server, you won't be able to use MS-CHAP to authenticate the clients.
-This would not be a lot of extra work given that the framework is in
-place, but I didn't need it myself so I didn't implement it.
-
-
-BUILDING THE PPPD
-
-MS-CHAP uses a combination of MD4 hashing and DES encryption for
-authentication. You may need to get Eric Young's libdes library in
-order to use my MS-CHAP extensions. A lot of UNIX systems already
-have DES encryption available via the crypt(3), encrypt(3) and
-setkey(3) interfaces. Some may (such as that on Digital UNIX)
-provide only the encryption mechanism and will not perform
-decryption. This is okay. We only need to encrypt to perform
-MS-CHAP authentication.
-
-If you have encrypt/setkey available, then hopefully you need only
-define these two things in your Makefile: -DUSE_CRYPT and -DCHAPMS.
-Skip the paragraphs below about obtaining and building libdes. Do
-the "make clean" and "make" as described below. Linux users
-should not need to modify their Makefiles. Instead,
-just do "make CHAPMS=1 USE_CRYPT=1".
-
-If you don't have encrypt and setkey, you will need Eric Young's
-libdes library. You can find it in:
-
-ftp://ftp.funet.fi/pub/crypt/mirrors/ftp.psy.uq.oz.au/DES/libdes-3.06.tar.gz
-
-Australian residents can get libdes from Eric Young's site:
-
-ftp://ftp.psy.uq.oz.au/pub/Crypto/DES/libdes-3.06.tar.gz
-
-It is also available on many other sites (ask Archie).
-
-I used libdes-3.06, but hopefully anything newer than that will work
-also. Get the library, build and test it on your system, and install
-it somewhere (typically /usr/local/lib and /usr/local/include).
-
-
-
-You should now be ready to (re)compile the PPPD. Go to the pppd
-subdirectory and make sure the Makefile contains "-DCHAPMS" in the
-CFLAGS or COMPILE_FLAGS macro, and that the LIBS macro (or LDADD for
-BSD systems) contains "-ldes". Depending on your system and where the
-DES library was installed, you may also need to alter the include and
-library paths used by your compiler.
-
-Do a "make clean" and then a "make" to rebuild pppd. Assuming all
-goes well, install the new pppd and move on to the CONFIGURATION
-section.
-
-
-CONFIGURATION
-
-If you've never used PPPD with CHAP before, read the man page (type
-"man pppd") and read the description in there. Basically, you need to
-edit the "chap-secrets" file typically named /etc/ppp/chap-secrets.
-This should contain the following two lines for each system with which
-you use CHAP (with no leading blanks):
-
- RemoteHost Account Secret
- Account RemoteHost Secret
-
-Note that you need both lines and that item 1 and 2 are swapped in the
-second line. I'm not sure why you need it twice, but it works and I didn't
-have time to look into it further. The "RemoteHost" is a somewhat
-arbitrary name for the remote Windows NT system you're dialing. It doesn't
-have to match the NT system's name, but it *does* have to match what you
-use with the "remotename" parameter. The "Account" is the Windows NT
-account name you have been told to use when dialing, and the "Secret" is
-the password for that account. For example, if your service provider calls
-their machine "DialupNT" and tells you your account and password are
-"customer47" and "foobar", add the following to your chap-secrets file:
-
- DialupNT customer47 foobar
- customer47 DialupNT foobar
-
-The only other thing you need to do for MS-CHAP (compared to normal CHAP)
-is to always use the "remotename" option, either on the command line or in
-your "options" file (see the pppd man page for details). In the case of
-the above example, you would need to use the following command line:
-
- pppd name customer47 remotename DialupNT <other options>
-
-or add:
-
- name customer47
- remotename DialupNT
-
-to your PPPD "options" file.
-
-The "remotename" option is required for MS-CHAP since Microsoft PPP servers
-don't send their system name in the CHAP challenge packet.
-
-
-E=691 (AUTHENTICATION_FAILURE) ERRORS WHEN YOU HAVE THE VALID SECRET (PASSWORD)
-
-If your RAS server is not the domain controller and is not a 'stand-alone'
-server then it must make a query to the domain controller for your domain.
-
-You need to specify the domain name with the user name when you attempt to
-use this type of a configuration. The domain name is specified with the
-local name in the chap-secrets file and with the option for the 'name'
-parameter.
-
-For example, the previous example would become:
-
- DialupNT domain\\customer47 foobar
- domain\\customer47 DialupNT foobar
-
-and
-
- pppd name 'domain\\customer47' remotename DialupNT <other options>
-
-or add:
-
- name domain\\customer47
- remotename DialupNT
-
-when the Windows NT domain name is simply called 'domain'.
-
-
-TROUBLESHOOTING
-
-Assuming that everything else has been configured correctly for PPP and
-CHAP, the MS-CHAP-specific problems you're likely to encounter are mostly
-related to your Windows NT account and its settings. A Microsoft server
-returns error codes in its CHAP response. The following are extracted from
-Microsoft's "chapexts.txt" file referenced above:
-
- 646 ERROR_RESTRICTED_LOGON_HOURS
- 647 ERROR_ACCT_DISABLED
- 648 ERROR_PASSWD_EXPIRED
- 649 ERROR_NO_DIALIN_PERMISSION
- 691 ERROR_AUTHENTICATION_FAILURE
- 709 ERROR_CHANGING_PASSWORD
-
-You'll see these in your pppd log as a line similar to:
-
- Remote message: E=649 R=0
-
-The "E=" is the error number from the table above, and the "R=" flag
-indicates whether the error is transient and the client should retry. If
-you consistently get error 691, then either you're using the wrong account
-name/password, or the DES library or MD4 hashing (in md4.c) aren't working
-properly. Verify your account name and password (use a Windows NT or
-Windows 95 system to dial-in if you have one available). If that checks
-out, test the DES library with the "destest" program included with the DES
-library. If DES checks out, the md4.c routines are probably failing
-(system byte ordering may be a problem) or my code is screwing up. I've
-only got access to a Linux system, so you're on your own for anything else.
-
-Another thing that might cause problems is that some RAS servers won't
-respond at all to LCP config requests without seeing the word "CLIENT"
-from the other end. If you see pppd sending out LCP config requests
-without getting any reply, try putting something in your chat script
-to send the word CLIENT after the modem has connected.
-
-If everything compiles cleanly, but fails at authentication time, then
-it might be a case of the MD4 or DES code screwing up. The following
-small program can be used to test the MS-CHAP code to see if it
-produces a known response:
-
------------------
-#include <stdio.h>
-
-#include "pppd.h"
-#include "chap.h"
-#include "chap_ms.h"
-
-int main(argc, argv)
- int argc;
- char *argv[];
-{
- u_char challenge[8];
- int challengeInt[sizeof(challenge)];
- chap_state cstate;
- int i;
-
- if (argc != 3) {
- fprintf(stderr, "Usage: %s <16-hexchar challenge> <password>\n",
- argv[0]); exit(1);
- }
-
- sscanf(argv[1], "%2x%2x%2x%2x%2x%2x%2x%2x",
- challengeInt + 0, challengeInt + 1, challengeInt + 2,
- challengeInt + 3, challengeInt + 4, challengeInt + 5,
- challengeInt + 6, challengeInt + 7);
-
- for (i = 0; i < sizeof(challenge); i++)
- challenge[i] = (u_char)challengeInt[i];
-
- ChapMS(&cstate, challenge, sizeof(challenge), argv[2], strlen(argv[2]));
- printf("Response length is %d, response is:", cstate.resp_length);
-
- for (i = 0; i < cstate.resp_length; i++) {
- if (i % 8 == 0)
- putchar('\n');
- printf("%02X ", (unsigned int)cstate.response[i]);
- }
-
- putchar('\n');
-
- exit(0);
-}
--------------
-
-This needs to link against chap_ms.o, md4.o, and the DES library. When
-you run it with the command line:
-
- $ testchap 00000000000000000000000000000000 hello
-
-it should output the following:
-
- Response length is 49, response is:
- 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00
- F4 D9 9D AF 82 64 DC 3C
- 53 F9 BC 92 14 B5 5D 9E
- 78 C4 21 48 9D B7 A8 B4
- 01
-
-if not, then either the DES library is not working, the MD4 code isn't
-working, or there are some problems with the port of the code in
-chap_ms.c.
-
-
-STILL TO DO
-
-A site using only MS-CHAP to authenticate has no need to store cleartext
-passwords in the "chap-secrets" file. A utility that spits out the ASCII
-hex MD4 hash of a given password would be nice, and would allow that hash
-to be used in chap-secrets in place of the password. The code to do this
-could quite easily be lifted from chap_ms.c (you have to convert the
-password to Unicode before hashing it). The chap_ms.c file would also have
-to be changed to recognize a password hash (16 binary bytes == 32 ASCII hex
-characters) and skip the hashing stage.
-
-A server implementation would allow MS-CHAP to be used with Windows NT and
-Windows 95 clients for enhanced security. Some new command-line options
-would be required, as would code to generate the Challenge packet and
-verify the response. Most of the helper functions are in place, so this
-shouldn't be too hard for someone to add.
diff --git a/mdk-stage1/ppp/README.cbcp b/mdk-stage1/ppp/README.cbcp
deleted file mode 100644
index 6f7b7685e..000000000
--- a/mdk-stage1/ppp/README.cbcp
+++ /dev/null
@@ -1,97 +0,0 @@
- Microsoft Call Back Configuration Protocol.
- by Pedro Roque Marques
- (updated by Paul Mackerras)
-
-The CBCP is a method by which the Microsoft Windows NT Server may
-implement additional security. It is possible to configure the server
-in such a manner so as to require that the client systems which
-connect with it are required that following a valid authentication to
-leave a method by which the number may be returned call.
-
-It is a requirement of servers so configured that the protocol be
-exchanged.
-
-So, this set of patches may be applied to the pppd process to enable
-the cbcp client *only* portion of the specification. It is primarily
-meant to permit connection with Windows NT Servers.
-
-The ietf-working specification may be obtained from ftp.microsoft.com
-in the developr/rfc directory.
-
-The ietf task group has decided to recommend that the LCP sequence be
-extended to permit the callback operation. For this reason, these
-patches are not 'part' of pppd but are an adjunct to the code.
-
-To enable CBCP support, all that is required is to change the
-appropriate Makefile in the pppd subdirectory to add "-DCBCP_SUPPORT"
-to the CFLAGS definition and add cbcp.o to the list of object files,
-and then recompile pppd. The patch below does this for Makefile.bsd
-and Makefile.linux.
-
-
---------------------------------cut here-------------------------------
-diff -r -c ppp-2.3.orig/pppd/Makefile.bsd ppp-2.3/pppd/Makefile.bsd
-*** ppp-2.3.orig/pppd/Makefile.bsd Tue Oct 8 13:33:33 1996
---- ppp-2.3/pppd/Makefile.bsd Fri Apr 11 23:59:15 1997
-***************
-*** 4,14 ****
- # -D_BITYPES is for FreeBSD, which doesn't define anything to
- # tell us that u_int32_t gets defined if <sys/types.h> is included.
- # Remove for older *BSD systems for which this isn't true.
-! CFLAGS+= -g -I.. -DHAVE_PATHS_H -D_BITYPES
-
- PROG= pppd
- SRCS= main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-! demand.c auth.c options.c sys-bsd.c
- MAN= pppd.cat8
- MAN8= pppd.8
- BINMODE=4555
---- 4,14 ----
- # -D_BITYPES is for FreeBSD, which doesn't define anything to
- # tell us that u_int32_t gets defined if <sys/types.h> is included.
- # Remove for older *BSD systems for which this isn't true.
-! CFLAGS+= -I.. -DHAVE_PATHS_H -D_BITYPES -DCBCP_SUPPORT
-
- PROG= pppd
- SRCS= main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-! demand.c auth.c options.c sys-bsd.c cbcp.c
- MAN= pppd.cat8
- MAN8= pppd.8
- BINMODE=4555
-diff -r -c ppp-2.3.orig/pppd/Makefile.linux ppp-2.3/pppd/Makefile.linux
-*** ppp-2.3.orig/pppd/Makefile.linux Tue Oct 8 15:42:41 1996
---- ppp-2.3/pppd/Makefile.linux Sat Apr 12 00:02:28 1997
-***************
-*** 14,20 ****
- ipxcp.h cbcp.h
- MANPAGES = pppd.8
- PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-! auth.o options.o demand.o sys-linux.o ipxcp.o
-
- all: pppd
-
---- 14,20 ----
- ipxcp.h cbcp.h
- MANPAGES = pppd.8
- PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-! auth.o options.o demand.o sys-linux.o ipxcp.o cbcp.o
-
- all: pppd
-
-***************
-*** 36,42 ****
- #INCLUDE_DIRS= -I/usr/include -I..
- INCLUDE_DIRS=
-
-! COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE
-
- CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
---- 36,42 ----
- #INCLUDE_DIRS= -I/usr/include -I..
- INCLUDE_DIRS=
-
-! COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DCBCP_SUPPORT
-
- CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
diff --git a/mdk-stage1/ppp/README.linux b/mdk-stage1/ppp/README.linux
deleted file mode 100644
index 62ed9ca7f..000000000
--- a/mdk-stage1/ppp/README.linux
+++ /dev/null
@@ -1,297 +0,0 @@
- PPP for Linux
- -------------
-
- Paul Mackerras
- 8 March 2001
-
- for ppp-2.4.1
-
-1. Introduction
----------------
-
-The Linux PPP implementation includes both kernel and user-level
-parts. This package contains the user-level part, which consists of
-the PPP daemon (pppd) and associated utilities. In the past this
-package has contained updated kernel drivers. This is no longer
-necessary, as the current 2.2 and 2.4 kernel sources contain
-up-to-date drivers.
-
-The Linux PPP implementation is capable of being used both for
-initiating PPP connections (as a `client') or for handling incoming
-PPP connections (as a `server'). Note that this is an operational
-distinction, based on how the connection is created, rather than a
-distinction that is made in the PPP protocols themselves.
-
-Mostly this package is used for PPP connections over modems connected
-via asynchronous serial ports, so this guide concentrates on this
-situation.
-
-The PPP protocol consists of two parts. One is a scheme for framing
-and encoding packets, the other is a series of protocols called LCP,
-IPCP, PAP and CHAP, for negotiating link options and for
-authentication. This package similarly consists of two parts: a
-kernel module which handles PPP's low-level framing protocol, and a
-user-level program called pppd which implements PPP's negotiation
-protocols.
-
-The kernel module assembles/disassembles PPP frames, handles error
-detection, and forwards packets between the serial port and either the
-kernel network code or the user-level program pppd. IP packets go
-directly to the kernel network code. So once pppd has negotiated the
-link, it in practice lies completely dormant until you want to take
-the link down, when it negotiates a graceful disconnect.
-
-
-2. Installation
----------------
-
-2.1 Kernel driver
-
-Assuming you are running a recent 2.2 or 2.4 (or later) series kernel,
-the kernel source code will contain an up-to-date kernel PPP driver.
-If the PPP driver was included in your kernel configuration when your
-kernel was built, then you only need to install the user-level
-programs. Otherwise you will need to get the source tree for your
-kernel version, configure it with PPP included, and recompile. Most
-Linux distribution vendors ship kernels with PPP included in the
-configuration.
-
-The PPP driver can be either compiled into the kernel or compiled as a
-kernel module. If it is compiled into the kernel, the PPP driver is
-included in the kernel image which is loaded at boot time. If it is
-compiled as a module, the PPP driver is present in one or more files
-under /lib/modules and is loaded into the kernel when needed.
-
-The 2.2 series kernels contain an older version of the kernel PPP
-driver, one which doesn't support multilink. If you want multilink,
-you need to run the latest 2.4 series kernel. The kernel PPP driver
-was completely rewritten for the 2.4 series kernels to support
-multilink and to allow it to operate over diverse kinds of
-communication medium (the 2.2 driver only operates over serial ports
-and devices which look like serial ports, such as pseudo-ttys).
-
-Under the 2.2 kernels, if PPP is compiled as a module, the PPP driver
-modules should be present in the /lib/modules/`uname -r`/net directory
-(where `uname -r` represents the kernel version number). The PPP
-driver module itself is called ppp.o, and there will usually be
-compression modules there, ppp_deflate.o and bsd_comp.o, as well as
-slhc.o, which handles TCP/IP header compression. If the PPP driver is
-compiled into the kernel, the compression code will still be compiled
-as modules, for kernels before 2.2.17pre12. For 2.2.17pre12 and later,
-if the PPP driver is compiled in, the compression code will also.
-
-Under the 2.4 kernels, there are two PPP modules, ppp_generic.o and
-ppp_async.o, plus the compression modules (ppp_deflate.o, bsd_comp.o
-and slhc.o). If the PPP generic driver is compiled into the kernel,
-the other four can then be present either as modules or compiled into
-the kernel. There is a sixth module, ppp_synctty.o, which is used for
-synchronous tty devices such as high-speed WAN adaptors.
-
-
-2.2 User-level programs
-
-If you obtained this package in .rpm or .deb format, you simply follow
-the usual procedure for installing the package.
-
-If you are using the .tar.gz form of this package, then cd into the
-ppp-2.4.1b1 directory you obtained by unpacking the archive and issue
-the following commands:
-
-$ ./configure
-$ make
-# make install
-
-The `make install' has to be done as root. This makes and installs
-four programs and their man pages: pppd, chat, pppstats and pppdump.
-If the /etc/ppp configuration directory doesn't exist, the `make
-install' step will create it and install some default configuration
-files.
-
-
-2.3 System setup for 2.4 kernels
-
-Under the 2.4 series kernels, pppd needs to be able to open /dev/ppp,
-character device (108,0). If you are using devfs (the device
-filesystem), the /dev/ppp node will automagically appear when the
-ppp_generic module is loaded, or at startup if ppp_generic is compiled
-in.
-
-If you have ppp_generic as a module, and you are using devfsd (the
-devfs daemon), you will need to add a line like this to your
-/etc/devfsd.conf:
-
-LOOKUP ppp MODLOAD
-
-Otherwise you will need to create a /dev/ppp device node with the
-commands:
-
-# mknod /dev/ppp c 108 0
-# chmod 600 /dev/ppp
-
-If you use module autoloading and have PPP as a module, you will need
-to add the following to your /etc/modules.conf or /etc/conf.modules:
-
-alias /dev/ppp ppp_generic
-alias char-major-108 ppp_generic
-alias tty-ldisc-3 ppp_async
-alias tty-ldisc-14 ppp_synctty
-alias ppp-compress-21 bsd_comp
-alias ppp-compress-24 ppp_deflate
-alias ppp-compress-26 ppp_deflate
-
-
-2.4 System setup under 2.2 series kernels
-
-Under the 2.2 series kernels, you should add the following to your
-/etc/modules.conf or /etc/conf.modules:
-
-alias tty-ldisc-3 ppp
-alias ppp-compress-21 bsd_comp
-alias ppp-compress-24 ppp_deflate
-alias ppp-compress-26 ppp_deflate
-
-
-3. Getting help with problems
------------------------------
-
-If you have problems with your PPP setup, or you just want to ask some
-questions, or better yet if you can help others with their PPP
-questions, then you should join the linux-ppp mailing list. Send an
-email to majordomo@vger.kernel.org with a line in the body saying
-
-subscribe linux-ppp
-
-To leave the mailing list, send an email to majordomo@vger.kernel.org
-with a line in the body saying
-
-unsubscribe linux-ppp
-
-To send a message to the list, email it to linux-ppp@vger.kernel.org.
-You don't have to be subscribed to send messages to the list.
-
-You can also email me (paulus@linuxcare.com.au) but I am overloaded
-with email and I can't respond to most messages I get in a timely
-fashion.
-
-There are also several relevant news groups, such as comp.protocols.ppp,
-comp.os.linux.networking, or comp.os.linux.setup.
-
-
-4. Configuring your dial-out PPP connections
---------------------------------------------
-
-Some Linux distribution makers include tools in their distributions
-for setting up PPP connections. For example, for Red Hat Linux and
-derivatives, you should probably use linuxconf or netcfg to set up
-your PPP connections.
-
-The two main windowing environments for Linux, KDE and Gnome, both
-come with GUI utilities for configuring and controlling PPP dial-out
-connections. They are convenient and relatively easy to configure.
-
-A third alternative is to use a PPP front-end package such as wvdial
-or ezppp. These also will handle most of the details of talking to
-the modem and setting up the PPP connection for you.
-
-Assuming that you don't want to use any of these tools, you want to
-set up the configuration manually yourself, then read on. This
-document gives a brief description and example. More details can be
-found by reading the pppd and chat man pages and the PPP-HOWTO.
-
-We assume that you have a modem that uses the Hayes-compatible AT
-command set connected to an async serial port (e.g. /dev/ttyS0) and
-that you are dialling out to an ISP.
-
-The trickiest and most variable part of setting up a dial-out PPP
-connection is the part which involves getting the modem to dial and
-then invoking PPP service at the far end. Generally, once both ends
-are talking PPP the rest is relatively straightforward.
-
-Now in fact pppd doesn't know anything about how to get modems to dial
-or what you have to say to the system at the far end to get it to talk
-PPP. That's handled by an external program such as chat, specified
-with the connect option to pppd. Chat takes a series of strings to
-expect from the modem interleaved with a series of strings to send to
-the modem. See the chat man page for more information. Here is a
-simple example for connecting to an ISP, assuming that the ISP's
-system starts talking PPP as soon as it answers the phone:
-
-pppd connect 'chat -v "" AT OK ATDT5551212 ~' \
- /dev/ttyS0 57600 crtscts debug defaultroute
-
-Going through pppd's options in order:
- connect 'chat ...' This gives a command to run to contact the
- PPP server. Here the supplied 'chat' program is used to dial a
- remote computer. The whole command is enclosed in single quotes
- because pppd expects a one-word argument for the 'connect' option.
- The options to 'chat' itself are:
-
- -v verbose mode; log what we do to syslog
- "" don't wait for any prompt, but instead...
- AT send the string "AT"
- OK expect the response "OK", then
- ATDT5551212 dial the modem, then
- ~ wait for a ~ character, indicating the start
- of a PPP frame from the server
-
- /dev/ttyS0 specifies which serial port the modem is connected to
- 57600 specifies the baud rate to use
- crtscts use hardware flow control using the RTS & CTS signals
- debug log the PPP negotiation with syslog
- defaultroute add default network route via the PPP link
-
-Pppd will write error messages and debugging logs to the syslogd
-daemon using the facility name "daemon". These messages may already
-be logged to the console or to a file like /var/log/messages; consult
-your /etc/syslog.conf file to see. If you want to make all pppd
-messages go to a file such as /var/log/ppp-debug, add the line
-
-daemon.* /var/log/ppp-debug
- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- This is one or more tabs. Do not use spaces.
-
-to syslog.conf; make sure to put one or more TAB characters (not
-spaces!) between the two fields. Then you need to create an empty
-/var/log/ppp-debug file with a command such as
-
- touch /var/log/ppp-debug
-
-and then restart syslogd, usually by sending it a SIGHUP signal with a
-command like this:
-
- killall -HUP syslogd
-
-
-4.1 Is the link up?
-
-The main way to tell if your PPP link is up and operational is the
-ifconfig ("interface configuration") command. Type
-
- /sbin/ifconfig
-
-at a shell prompt. It should print a list of interfaces including one
-like this example:
-
-ppp0 Link encap Point-to-Point Protocol
- inet addr 192.76.32.3 P-t-P 129.67.1.165 Mask 255.255.255.0
- UP POINTOPOINT RUNNING MTU 1500 Metric 1
- RX packets 33 errors 0 dropped 0 overrun 0
- TX packets 42 errors 0 dropped 0 overrun 0
-
-Assuming that ifconfig shows the ppp network interface, you can test
-the link using the ping command like this:
-
- /sbin/ping -c 3 129.67.1.165
-
-where the address you give is the address shown as the P-t-P address
-in the ifconfig output. If the link is operating correctly, you
-should see output like this:
-
- PING 129.67.1.165 (129.67.1.165): 56 data bytes
- 64 bytes from 129.67.1.165: icmp_seq=0 ttl=255 time=268 ms
- 64 bytes from 129.67.1.165: icmp_seq=1 ttl=255 time=247 ms
- 64 bytes from 129.67.1.165: icmp_seq=2 ttl=255 time=266 ms
- --- 129.67.1.165 ping statistics ---
- 3 packets transmitted, 3 packets received, 0% packet loss
- round-trip min/avg/max = 247/260/268 ms
-
diff --git a/mdk-stage1/ppp/README.sol2 b/mdk-stage1/ppp/README.sol2
deleted file mode 100644
index 4c862208f..000000000
--- a/mdk-stage1/ppp/README.sol2
+++ /dev/null
@@ -1,220 +0,0 @@
-This file describes the installation process for ppp-2.3 on systems
-running Solaris 2. The Solaris 2 and SVR4 ports share a lot of code
-but are not identical. The STREAMS kernel modules and driver for
-Solaris 2 are in the svr4 directory (and use some code from the
-modules directory).
-
-NOTE: Although the kernel driver and modules have been designed to
-operate correctly on SMP systems, they have not been extensively
-tested on SMP machines. Some users of SMP Solaris x86 systems have
-reported system problems apparently linked to the use of previous
-versions of this software. I believe these problems have been fixed.
-
-
-Installation.
-*************
-
-1. Run the configure script and make the user-level programs and the
-kernel modules.
-
- ./configure
- make
-
-If you wish to use gcc (or another compiler) instead of Sun's cc, edit
-the svr4/Makedefs file and uncomment the definition of CC. You can
-also change the options passed to the C compiler by editing the COPTS
-definition.
-
-2. Install the programs and kernel modules: as root, do
-
- make install
-
-This installs pppd, chat and pppstats in /usr/local/bin and the kernel
-modules in /kernel/drv and /kernel/strmod, and creates the /etc/ppp
-directory and populates it with default configuration files. You can
-change the installation directories by editing svr4/Makedefs.
-
-If your system normally has only one network interface, the default
-Solaris 2 system startup scripts will disable IP forwarding in the IP
-kernel module. This will prevent the remote machine from using the
-local machine as a gateway to access other hosts. The solution is to
-create an /etc/ppp/ip-up script containing something like this:
-
- #!/bin/sh
- /usr/sbin/ndd -set /dev/ip ip_forwarding 1
-
-See the man page for ip(7p) for details.
-
-Dynamic STREAMS Re-Plumbing Support.
-************************************
-
-Solaris 8 includes dynamic re-plumbing support. With this, modules
-below ip can be inserted, or removed, without having the ip stream be
-unplumbed, and re-plumbed again. All states in ip for an interface
-will therefore now be preserved. Users can install (or upgrade)
-modules like firewall, bandwidth manager, cache manager, tunneling,
-etc., without shutting the machine down.
-
-To support this, ppp driver now uses /dev/udp instead of /dev/ip for
-the ip stream. The interface stream (where ip module pushed on top of
-ppp) is then I_PLINK'ed below the ip stream. /dev/udp is used because
-STREAMS will not let a driver be PLINK'ed under itself, and /dev/ip is
-typically the driver at the bottom of the tunneling interfaces
-stream. The mux ids of the ip streams are then added using
-SIOCSxIFMUXID ioctl.
-
-Users will be able to see the modules on the interface stream by, for
-example:
-
- pikapon% ifconfig ppp modlist
- 0 ip
- 1 ppp
-
-Or arbitrarily if bandwidth manager and firewall modules are installed:
-
- pikapon% ifconfig hme0 modlist
- 0 arp
- 1 ip
- 2 ipqos
- 3 firewall
- 4 hme
-
-Snoop Support.
-**************
-
-This version includes support for /usr/sbin/snoop. Tests has been done
-on both Solaris 7 and 8. Only IPv4 and IPv6 packets will be sent up to
-stream(s) marked as promiscuous, e.g, snoop et al.
-
-Users will be able to see the packets on the ppp interface by, for example:
-
- snoop -d ppp0
-
-See the man page for snoop(1M) for details.
-
-IPv6 Support.
-*************
-
-This is for Solaris 8 and later.
-
-This version has been tested under Solaris 8 running IPv6. As of now,
-interoperability testing has only been done between Solaris machines
-in terms of the IPV6 NCP. An additional command line option for the
-pppd daemon has been added: ipv6cp-use-persistent.
-
-By default, compilation for IPv6 support is not enabled. Uncomment
-the necessary lines in pppd/Makefile.sol2 to enable it. Once done, the
-quickest way to get IPv6 running is to add the following somewhere in
-the command line option:
-
- +ipv6 ipv6cp-use-persistent
-
-The persistent id for the link-local address was added to conform to
-RFC 2472; such that if there's an EUI-48 available, use that to make
-up the EUI-64. As of now, the Solaris implementation extracts the
-EUI-48 id from the Ethernet's MAC address (the ethernet interface
-needs to be up). Future works might support other ways of obtaining a
-unique yet persistent id, such as EEPROM serial numbers, etc.
-
-There need not be any up/down scripts for ipv6, e.g. /etc/ppp/ipv6-up
-or /etc/ppp/ipv6-down, to trigger IPv6 neighbor discovery for auto
-configuration and routing. The in.ndpd daemon will perform all of the
-necessary jobs in the background. /etc/inet/ndpd.conf can be further
-customized to enable the machine as an IPv6 router. See the man page
-for in.ndpd(1M) and ndpd.conf(4) for details.
-
-Below is a sample output of "ifconfig -a" with persistent link-local
-address. Note the UNNUMBERED flag is set because hme0 and ppp0 both
-have identical link-local IPv6 addresses:
-
-lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
- inet 127.0.0.1 netmask ff000000
-hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
- inet 129.146.86.248 netmask ffffff00 broadcast 129.146.86.255
- ether 8:0:20:8d:38:c1
-lo0: flags=2000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6> mtu 8252 index 1
- inet6 ::1/128
-hme0: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
- ether 8:0:20:8d:38:c1
- inet6 fe80::a00:20ff:fe8d:38c1/10
-hme0:1: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
- inet6 fec0::56:a00:20ff:fe8d:38c1/64
-hme0:2: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
- inet6 2000::56:a00:20ff:fe8d:38c1/64
-hme0:3: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
- inet6 2::56:a00:20ff:fe8d:38c1/64
-ppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1500 index 12
- inet 172.16.1.1 --> 172.16.1.2 netmask ffffff00
-ppp0: flags=2202851<UP,POINTOPOINT,RUNNING,MULTICAST,UNNUMBERED,NONUD,IPv6> mtu 1500 index 12
- inet6 fe80::a00:20ff:fe8d:38c1/10 --> fe80::a00:20ff:fe7a:24fb
-
-Note also that a plumbed ipv6 interface stream will exist throughout
-the entire PPP session in the case where the peer rejects IPV6CP,
-which further causes the interface state to stay down. Unplumbing will
-happen when the daemon exits. This is done by design and is not a bug.
-
-64-bit Support.
-***************
-
-This version has been tested under Solaris 7 (and Solaris 8 ) in both
-32- and 64-bits environments (Ultra class machines). Installing the
-package by executing "make install" will result in additional files
-residing in /kernel/drv/sparcv9 and /kernel/strmod/sparcv9
-subdirectories.
-
-64-bit modules and driver have been compiled and tested using Sun's cc.
-
-Synchronous Serial Support.
-***************************
-
-This version has working but limited support for the on-board
-synchronous HDLC interfaces. It has been tested with the /dev/se_hdlc
-and /dev/zsh drivers. Synchronous mode was tested with a Cisco
-router.
-
-There ppp daemon does not directly support controlling the serial
-interface. It relies on the /usr/sbin/syncinit command to initialize
-HDLC mode and clocking.
-
-Some bugs remain: large sized frames are not sent/received properly,
-and may be related to the IP mtu. This may be due to bugs in pppd
-itself, bugs in Solaris or the serial drivers. The /dev/zsh driver
-seems more larger and can send/receive larger frames than the
-/dev/se_hdlc driver. There is a confirmed bug with NRZ/NRZI mode in
-the /dev/se_hdlc driver, and Solaris patch 104596-11 is needed to
-correct it. (However this patch seems to introduce other serial
-problems. If you don't apply the patch, the workaround is to change
-the nrzi mode to yes or no, whichever works)
-
-How to start pppd with synchronous support:
-
-#!/bin/sh
-
-local=1.1.1.1 # your ip address here
-baud=38400 # needed, but ignored by serial driver
-
-# Change to the correct serial driver/port
-#dev=/dev/zsh0
-dev=/dev/se_hdlc0
-
-# Change the driver, nrzi mode, speed and clocking to match your setup
-# This configuration is for external clocking from the DCE
-connect="syncinit se_hdlc0 nrzi=no speed=64000 txc=rxc rxc=rxc"
-
-/usr/sbin/pppd $dev sync $baud novj noauth $local: connect "$connect"
-
-
-Sample Cisco router config excerpt:
-
-!
-! Cisco router setup as DCE with RS-232 DCE cable
-!
-!
-interface Serial0
- ip address 1.1.1.2 255.255.255.0
- encapsulation ppp
- clockrate 64000
- no nrzi-encoding
- no shutdown
-!
-
diff --git a/mdk-stage1/ppp/README.sunos4 b/mdk-stage1/ppp/README.sunos4
deleted file mode 100644
index b48aec377..000000000
--- a/mdk-stage1/ppp/README.sunos4
+++ /dev/null
@@ -1,62 +0,0 @@
-This file describes the installation process for ppp-2.3 on systems
-running SunOS 4.1.x (or the equivalent).
-
-The STREAMS modules in the sunos4 directory provide kernel support for
-PPP on SunOS 4.1.x systems. They have been tested under SunOS 4.1.3
-on a SparcStation 1+. They should work under earlier SunOS 4.1.x
-systems, but no guarantees are given.
-
-These modules are designed to be loaded into the running kernel using
-the `modload' command.
-
-
-Installation.
-*************
-
-1. Run the configure script and make the user-level programs and the
-kernel modules.
-
- ./configure
- make
-
-If you wish to compile using gcc instead of cc, edit the
-sunos4/Makedefs file and uncomment the line saying "CC = gcc". You
-can also change the C compiler options by editing the COPTS
-definition.
-
-2. Install the pppd, pppstats and chat programs and the loadable
-module object files (you need to be root to do this):
-
- make install
-
-By default, the programs and the loadable module object files go into
-/usr/local/etc. Doing `make install' also copies a script called
-ppp.INSTALL into /dev, and makes ppp.LOAD, ppp.UNLOAD, ppp.MKDEV and
-ppp.RMDEV links to it. You can change the installation directories by
-editing sunos4/Makedefs.
-
-3. Load the ppp modules (you need to be root for this too):
-
- /dev/ppp.LOAD
-
-You will want to do this in your /etc/rc.local file once you have
-everything installed. I suggest you put something like the following
-in /etc/rc.local (or /etc/loadable, if you have one):
-
- if [ -f /dev/ppp.AUTOLOAD ]; then
- /dev/ppp.LOAD
- fi
-
-and then create a /dev/ppp.AUTOLOAD file with the command
-
- touch /dev/ppp.AUTOLOAD
-
-It is not advisable to unload the "if_ppp" module, because it creates
-network interface units, and SunOS does not provide any way to destroy
-network interfaces once created. If you do unload it, the system will
-probably crash at some later stage.
-
-If you have previously had ppp-2.2 installed, you may have statements
-in your /etc/rc.local to load the ppp module. You will need to remove
-those. Having done this, you will need to reboot to remove the old
-ppp module and load the new modules.
diff --git a/mdk-stage1/ppp/SETUP b/mdk-stage1/ppp/SETUP
deleted file mode 100644
index fb28a2138..000000000
--- a/mdk-stage1/ppp/SETUP
+++ /dev/null
@@ -1,111 +0,0 @@
- Configuring a PPP link.
-
-After you have compiled and installed this package, there are some
-configuration files which will generally need to be set up. The
-pppd(8) man page is the best reference for the full details; this file
-outlines the configuration process for the most common case, where
-this package is being used to enable a machine to dial an ISP and
-connect to the internet. The FAQ and README.linux files also provide
-useful information about setting up PPP.
-
-Dialling an ISP.
-****************
-
-Usually, an ISP will assign an IP address to your machine, and will
-refuse to authenticate itself to you. Some ISPs require a username
-and password to be entered before PPP service commences, while others
-use PPP authentication (using either the PAP or CHAP protocols).
-
-The recommended way to set up to dial an ISP is for the system
-administrator to create a file under /etc/ppp/peers, named for the ISP
-that you will be dialling. For example, suppose the file is called
-/etc/ppp/peers/isp. This file would contain something like this:
-
-cua0 # modem is connected to /dev/cua0
-38400 # run the serial port at 38400 baud
-crtscts # use hardware flow control
-noauth # don't require the ISP to authenticate itself
-defaultroute # use the ISP as our default route
-connect '/usr/sbin/chat -v -f /etc/ppp/chat-isp'
-
-If there are any other pppd options that should apply when calling
-this ISP, they can also be placed in this file.
-
-The /etc/ppp/chat-isp file named in the last line contains the script
-for chat(8) to use to dial the ISP and go through any username/
-password authentication required before PPP service starts. Here is
-an example (for dialling an Annex terminal server):
-
-ABORT "NO CARRIER"
-ABORT "NO DIALTONE"
-ABORT "ERROR"
-ABORT "NO ANSWER"
-ABORT "BUSY"
-ABORT "Username/Password Incorrect"
-"" "at"
-OK "at&d2&c1"
-OK "atdt2479381"
-"name:" "^Uusername"
-"word:" "\qpassword"
-"annex" "ppp"
-"Switching to PPP-ppp-Switching to PPP"
-
-See the chat(8) man page for details of the script. If you are not
-sure how the initial dialog with your ISP will go, you could use
-a terminal emulator such as kermit or minicom to go through the
-process manually.
-
-If your ISP requires PAP or CHAP authentication, you will have to
-create a line in /etc/ppp/pap-secrets or /etc/ppp/chap-secrets like
-this:
-
-myhostname * "password"
-
-(Replace myhostname with the hostname of your machine.)
-
-At this point, you can initiate the link with the command:
-
-/usr/sbin/pppd call isp
-
-(N.B.: pppd might be installed in a different directory on some
-systems).
-
-This will return to the shell prompt immediately, as pppd will detach
-itself from its controlling terminal. (If you don't want it to do
-this, use the "nodetach" option.)
-
-Pppd will log messages describing the progress of the connection and
-any errors using the syslog facility (see the syslogd(8) and
-syslog.conf(5) man pages). Pppd issues messages using syslog facility
-daemon (or local2 if it has been compiled with debugging enabled);
-chat uses facility local2. It is often useful to see messages of
-priority notice or higher on the console. To see these, find the line
-in /etc/syslog.conf which has /dev/console on the right-hand side, and
-add `daemon.notice' on the left. This line should end up something
-like this:
-
-*.err;kern.debug;daemon,local2,auth.notice;mail.crit /dev/console
-
-If you want to see more messages from pppd, request messages of
-priority info or higher for facility daemon, like this:
-
-*.err;kern.debug;daemon.info;local2,auth.notice;mail.crit /dev/console
-
-It is also useful to add a line like this:
-
-daemon,local2.debug /etc/ppp/ppp-log
-
-If you do this, you will need to create an empty /etc/ppp/ppp-log
-file.
-
-After modifying syslog.conf, you will then need to send a HUP signal
-to syslogd (or reboot).
-
-When you wish terminate the PPP link, you should send a TERM or INTR
-signal to pppd. Pppd writes its process ID to a file called
-ppp<n>.pid in /var/run (or /etc/ppp on older systems such as SunOS or
-Ultrix). Here <n> is the PPP interface unit number, which will be 0
-unless you have more than one PPP link running simultaneously. Thus
-you can terminate the link with a command like
-
- kill `cat /var/run/ppp0.pid`
diff --git a/mdk-stage1/ppp/chat/Makefile.linux b/mdk-stage1/ppp/chat/Makefile.linux
deleted file mode 100644
index 586cbd876..000000000
--- a/mdk-stage1/ppp/chat/Makefile.linux
+++ /dev/null
@@ -1,27 +0,0 @@
-# $Id$
-
-CDEF1= -DTERMIOS # Use the termios structure
-CDEF2= -DSIGTYPE=void # Standard definition
-CDEF3= -UNO_SLEEP # Use the usleep function
-CDEF4= -DFNDELAY=O_NDELAY # Old name value
-CDEFS= $(CDEF1) $(CDEF2) $(CDEF3) $(CDEF4)
-
-CFLAGS= $(RPM_OPT_FLAGS) $(CDEFS)
-
-INSTALL= install
-
-all: chat
-
-chat: chat.o
- $(CC) -o chat chat.o
-
-chat.o: chat.c
- $(CC) -c $(CFLAGS) -o chat.o chat.c
-
-install: chat
- mkdir -p $(BINDIR)
- $(INSTALL) -s -c chat $(BINDIR)
- $(INSTALL) -c -m 644 chat.8 $(MANDIR)/man8
-
-clean:
- rm -f chat.o chat *~
diff --git a/mdk-stage1/ppp/chat/Makefile.linux.makeopt b/mdk-stage1/ppp/chat/Makefile.linux.makeopt
deleted file mode 100644
index 974680a93..000000000
--- a/mdk-stage1/ppp/chat/Makefile.linux.makeopt
+++ /dev/null
@@ -1,27 +0,0 @@
-# $Id$
-
-CDEF1= -DTERMIOS # Use the termios structure
-CDEF2= -DSIGTYPE=void # Standard definition
-CDEF3= -UNO_SLEEP # Use the usleep function
-CDEF4= -DFNDELAY=O_NDELAY # Old name value
-CDEFS= $(CDEF1) $(CDEF2) $(CDEF3) $(CDEF4)
-
-CFLAGS= -O2 -g -pipe $(CDEFS)
-
-INSTALL= install
-
-all: chat
-
-chat: chat.o
- $(CC) -o chat chat.o
-
-chat.o: chat.c
- $(CC) -c $(CFLAGS) -o chat.o chat.c
-
-install: chat
- mkdir -p $(BINDIR)
- $(INSTALL) -s -c chat $(BINDIR)
- $(INSTALL) -c -m 644 chat.8 $(MANDIR)/man8
-
-clean:
- rm -f chat.o chat *~
diff --git a/mdk-stage1/ppp/chat/Makefile.sol2 b/mdk-stage1/ppp/chat/Makefile.sol2
deleted file mode 100644
index f566cc68b..000000000
--- a/mdk-stage1/ppp/chat/Makefile.sol2
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Makefile for chat on Solaris 2
-#
-
-include ../solaris/Makedefs
-
-CFLAGS = $(COPTS) -DNO_USLEEP -DSOL2
-
-all: chat
-
-chat: chat.o
- $(CC) -o chat chat.o
-
-install: chat
- $(INSTALL) -f $(BINDIR) chat
- $(INSTALL) -m 444 -f $(MANDIR)/man8 chat.8
-
-clean:
- rm -f *~ *.o chat
diff --git a/mdk-stage1/ppp/chat/Makefile.sunos4 b/mdk-stage1/ppp/chat/Makefile.sunos4
deleted file mode 100644
index b3507360e..000000000
--- a/mdk-stage1/ppp/chat/Makefile.sunos4
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Makefile for chat on suns
-#
-
-include ../sunos4/Makedefs
-
-CFLAGS = -DSUNOS $(COPTS)
-
-all: chat
-
-chat: chat.o
- $(CC) -o chat chat.o
-
-install: chat
- $(INSTALL) -c chat $(BINDIR)/chat
- $(INSTALL) -c -m 444 chat.8 $(MANDIR)/man8/chat.8
-
-clean:
- rm -f *~ *.o chat
diff --git a/mdk-stage1/ppp/chat/chat.8 b/mdk-stage1/ppp/chat/chat.8
deleted file mode 100644
index 8d2029609..000000000
--- a/mdk-stage1/ppp/chat/chat.8
+++ /dev/null
@@ -1,515 +0,0 @@
-.\" -*- nroff -*-
-.\" manual page [] for chat 1.8
-.\" $Id$
-.\" SH section heading
-.\" SS subsection heading
-.\" LP paragraph
-.\" IP indented paragraph
-.\" TP hanging label
-.TH CHAT 8 "22 May 1999" "Chat Version 1.22"
-.SH NAME
-chat \- Automated conversational script with a modem
-.SH SYNOPSIS
-.B chat
-[
-.I options
-]
-.I script
-.SH DESCRIPTION
-.LP
-The \fIchat\fR program defines a conversational exchange between the
-computer and the modem. Its primary purpose is to establish the
-connection between the Point-to-Point Protocol Daemon (\fIpppd\fR) and
-the remote's \fIpppd\fR process.
-.SH OPTIONS
-.TP
-.B -f \fI<chat file>
-Read the chat script from the chat \fIfile\fR. The use of this option
-is mutually exclusive with the chat script parameters. The user must
-have read access to the file. Multiple lines are permitted in the
-file. Space or horizontal tab characters should be used to separate
-the strings.
-.TP
-.B -t \fI<timeout>
-Set the timeout for the expected string to be received. If the string
-is not received within the time limit then the reply string is not
-sent. An alternate reply may be sent or the script will fail if there
-is no alternate reply string. A failed script will cause the
-\fIchat\fR program to terminate with a non-zero error code.
-.TP
-.B -r \fI<report file>
-Set the file for output of the report strings. If you use the keyword
-\fIREPORT\fR, the resulting strings are written to this file. If this
-option is not used and you still use \fIREPORT\fR keywords, the
-\fIstderr\fR file is used for the report strings.
-.TP
-.B -e
-Start with the echo option turned on. Echoing may also be turned on
-or off at specific points in the chat script by using the \fIECHO\fR
-keyword. When echoing is enabled, all output from the modem is echoed
-to \fIstderr\fR.
-.TP
-.B -E
-Enables environment variable substituion within chat scripts using the
-standard \fI$xxx\fR syntax.
-.TP
-.B -v
-Request that the \fIchat\fR script be executed in a verbose mode. The
-\fIchat\fR program will then log the execution state of the chat
-script as well as all text received from the modem and the output
-strings sent to the modem. The default is to log through the SYSLOG;
-the logging method may be altered with the -S and -s flags.
-.TP
-.B -V
-Request that the \fIchat\fR script be executed in a stderr verbose
-mode. The \fIchat\fR program will then log all text received from the
-modem and the output strings sent to the modem to the stderr device. This
-device is usually the local console at the station running the chat or
-pppd program.
-.TP
-.B -s
-Use stderr. All log messages from '-v' and all error messages will be
-sent to stderr.
-.TP
-.B -S
-Do not use the SYSLOG. By default, error messages are sent to the
-SYSLOG. The use of -S will prevent both log messages from '-v' and
-error messages from being sent to the SYSLOG.
-.TP
-.B -T \fI<phone number>
-Pass in an arbitary string, usually a phone number, that will be
-substituted for the \\T substitution metacharacter in a send string.
-.TP
-.B -U \fI<phone number 2>
-Pass in a second string, usually a phone number, that will be
-substituted for the \\U substitution metacharacter in a send string.
-This is useful when dialing an ISDN terminal adapter that requires two
-numbers.
-.TP
-.B script
-If the script is not specified in a file with the \fI-f\fR option then
-the script is included as parameters to the \fIchat\fR program.
-.SH CHAT SCRIPT
-.LP
-The \fIchat\fR script defines the communications.
-.LP
-A script consists of one or more "expect-send" pairs of strings,
-separated by spaces, with an optional "subexpect-subsend" string pair,
-separated by a dash as in the following example:
-.IP
-ogin:-BREAK-ogin: ppp ssword: hello2u2
-.LP
-This line indicates that the \fIchat\fR program should expect the string
-"ogin:". If it fails to receive a login prompt within the time interval
-allotted, it is to send a break sequence to the remote and then expect the
-string "ogin:". If the first "ogin:" is received then the break sequence is
-not generated.
-.LP
-Once it received the login prompt the \fIchat\fR program will send the
-string ppp and then expect the prompt "ssword:". When it receives the
-prompt for the password, it will send the password hello2u2.
-.LP
-A carriage return is normally sent following the reply string. It is not
-expected in the "expect" string unless it is specifically requested by using
-the \\r character sequence.
-.LP
-The expect sequence should contain only what is needed to identify the
-string. Since it is normally stored on a disk file, it should not contain
-variable information. It is generally not acceptable to look for time
-strings, network identification strings, or other variable pieces of data as
-an expect string.
-.LP
-To help correct for characters which may be corrupted during the initial
-sequence, look for the string "ogin:" rather than "login:". It is possible
-that the leading "l" character may be received in error and you may never
-find the string even though it was sent by the system. For this reason,
-scripts look for "ogin:" rather than "login:" and "ssword:" rather than
-"password:".
-.LP
-A very simple script might look like this:
-.IP
-ogin: ppp ssword: hello2u2
-.LP
-In other words, expect ....ogin:, send ppp, expect ...ssword:, send hello2u2.
-.LP
-In actual practice, simple scripts are rare. At the vary least, you
-should include sub-expect sequences should the original string not be
-received. For example, consider the following script:
-.IP
-ogin:--ogin: ppp ssword: hello2u2
-.LP
-This would be a better script than the simple one used earlier. This would look
-for the same login: prompt, however, if one was not received, a single
-return sequence is sent and then it will look for login: again. Should line
-noise obscure the first login prompt then sending the empty line will
-usually generate a login prompt again.
-.SH COMMENTS
-Comments can be embedded in the chat script. A comment is a line which
-starts with the \fB#\fR (hash) character in column 1. Such comment
-lines are just ignored by the chat program. If a '#' character is to
-be expected as the first character of the expect sequence, you should
-quote the expect string.
-If you want to wait for a prompt that starts with a # (hash)
-character, you would have to write something like this:
-.IP
-# Now wait for the prompt and send logout string
-.br
-\'# ' logout
-.LP
-
-.SH SENDING DATA FROM A FILE
-If the string to send starts with an at sign (@), the rest of the
-string is taken to be the name of a file to read to get the string to
-send. If the last character of the data read is a newline, it is
-removed. The file can be a named pipe (or fifo) instead of a regular
-file. This provides a way for \fBchat\fR to communicate with another
-program, for example, a program to prompt the user and receive a
-password typed in.
-.LP
-
-.SH ABORT STRINGS
-Many modems will report the status of the call as a string. These
-strings may be \fBCONNECTED\fR or \fBNO CARRIER\fR or \fBBUSY\fR. It
-is often desirable to terminate the script should the modem fail to
-connect to the remote. The difficulty is that a script would not know
-exactly which modem string it may receive. On one attempt, it may
-receive \fBBUSY\fR while the next time it may receive \fBNO CARRIER\fR.
-.LP
-These "abort" strings may be specified in the script using the \fIABORT\fR
-sequence. It is written in the script as in the following example:
-.IP
-ABORT BUSY ABORT 'NO CARRIER' '' ATZ OK ATDT5551212 CONNECT
-.LP
-This sequence will expect nothing; and then send the string ATZ. The
-expected response to this is the string \fIOK\fR. When it receives \fIOK\fR,
-the string ATDT5551212 to dial the telephone. The expected string is
-\fICONNECT\fR. If the string \fICONNECT\fR is received the remainder of the
-script is executed. However, should the modem find a busy telephone, it will
-send the string \fIBUSY\fR. This will cause the string to match the abort
-character sequence. The script will then fail because it found a match to
-the abort string. If it received the string \fINO CARRIER\fR, it will abort
-for the same reason. Either string may be received. Either string will
-terminate the \fIchat\fR script.
-.SH CLR_ABORT STRINGS
-This sequence allows for clearing previously set \fBABORT\fR strings.
-\fBABORT\fR strings are kept in an array of a pre-determined size (at
-compilation time); \fBCLR_ABORT\fR will reclaim the space for cleared
-entries so that new strings can use that space.
-.SH SAY STRINGS
-The \fBSAY\fR directive allows the script to send strings to the user
-at the terminal via standard error. If \fBchat\fR is being run by
-pppd, and pppd is running as a daemon (detached from its controlling
-terminal), standard error will normally be redirected to the file
-/etc/ppp/connect-errors.
-.LP
-\fBSAY\fR strings must be enclosed in single or double quotes. If
-carriage return and line feed are needed in the string to be output,
-you must explicitely add them to your string.
-.LP
-The SAY strings could be used to give progress messages in sections of
-the script where you want to have 'ECHO OFF' but still let the user
-know what is happening. An example is:
-.IP
-ABORT BUSY
-.br
-ECHO OFF
-.br
-SAY "Dialling your ISP...\\n"
-.br
-\'' ATDT5551212
-.br
-TIMEOUT 120
-.br
-SAY "Waiting up to 2 minutes for connection ... "
-.br
-CONNECT ''
-.br
-SAY "Connected, now logging in ...\n"
-.br
-ogin: account
-.br
-ssword: pass
-.br
-$ \c
-SAY "Logged in OK ...\n"
-\fIetc ...\fR
-.LP
-This sequence will only present the SAY strings to the user and all
-the details of the script will remain hidden. For example, if the
-above script works, the user will see:
-.IP
-Dialling your ISP...
-.br
-Waiting up to 2 minutes for connection ... Connected, now logging in ...
-.br
-Logged in OK ...
-.LP
-
-.SH REPORT STRINGS
-A \fBreport\fR string is similar to the ABORT string. The difference
-is that the strings, and all characters to the next control character
-such as a carriage return, are written to the report file.
-.LP
-The report strings may be used to isolate the transmission rate of the
-modem's connect string and return the value to the chat user. The
-analysis of the report string logic occurs in conjunction with the
-other string processing such as looking for the expect string. The use
-of the same string for a report and abort sequence is probably not
-very useful, however, it is possible.
-.LP
-The report strings to no change the completion code of the program.
-.LP
-These "report" strings may be specified in the script using the \fIREPORT\fR
-sequence. It is written in the script as in the following example:
-.IP
-REPORT CONNECT ABORT BUSY '' ATDT5551212 CONNECT '' ogin: account
-.LP
-This sequence will expect nothing; and then send the string
-ATDT5551212 to dial the telephone. The expected string is
-\fICONNECT\fR. If the string \fICONNECT\fR is received the remainder
-of the script is executed. In addition the program will write to the
-expect-file the string "CONNECT" plus any characters which follow it
-such as the connection rate.
-.SH CLR_REPORT STRINGS
-This sequence allows for clearing previously set \fBREPORT\fR strings.
-\fBREPORT\fR strings are kept in an array of a pre-determined size (at
-compilation time); \fBCLR_REPORT\fR will reclaim the space for cleared
-entries so that new strings can use that space.
-.SH ECHO
-The echo options controls whether the output from the modem is echoed
-to \fIstderr\fR. This option may be set with the \fI-e\fR option, but
-it can also be controlled by the \fIECHO\fR keyword. The "expect-send"
-pair \fIECHO\fR \fION\fR enables echoing, and \fIECHO\fR \fIOFF\fR
-disables it. With this keyword you can select which parts of the
-conversation should be visible. For instance, with the following
-script:
-.IP
-ABORT 'BUSY'
-.br
-ABORT 'NO CARRIER'
-.br
-'' ATZ
-.br
-OK\\r\\n ATD1234567
-.br
-\\r\\n \\c
-.br
-ECHO ON
-.br
-CONNECT \\c
-.br
-ogin: account
-.LP
-all output resulting from modem configuration and dialing is not visible,
-but starting with the \fICONNECT\fR (or \fIBUSY\fR) message, everything
-will be echoed.
-.SH HANGUP
-The HANGUP options control whether a modem hangup should be considered
-as an error or not. This option is useful in scripts for dialling
-systems which will hang up and call your system back. The HANGUP
-options can be \fBON\fR or \fBOFF\fR.
-.br
-When HANGUP is set OFF and the modem hangs up (e.g., after the first
-stage of logging in to a callback system), \fBchat\fR will continue
-running the script (e.g., waiting for the incoming call and second
-stage login prompt). As soon as the incoming call is connected, you
-should use the \fBHANGUP ON\fR directive to reinstall normal hang up
-signal behavior. Here is an (simple) example script:
-.IP
-ABORT 'BUSY'
-.br
-'' ATZ
-.br
-OK\\r\\n ATD1234567
-.br
-\\r\\n \\c
-.br
-CONNECT \\c
-.br
-\'Callback login:' call_back_ID
-.br
-HANGUP OFF
-.br
-ABORT "Bad Login"
-.br
-\'Callback Password:' Call_back_password
-.br
-TIMEOUT 120
-.br
-CONNECT \\c
-.br
-HANGUP ON
-.br
-ABORT "NO CARRIER"
-.br
-ogin:--BREAK--ogin: real_account
-.br
-\fIetc ...\fR
-.LP
-.SH TIMEOUT
-The initial timeout value is 45 seconds. This may be changed using the \fB-t\fR
-parameter.
-.LP
-To change the timeout value for the next expect string, the following
-example may be used:
-.IP
-ATZ OK ATDT5551212 CONNECT TIMEOUT 10 ogin:--ogin: TIMEOUT 5 assword: hello2u2
-.LP
-This will change the timeout to 10 seconds when it expects the login:
-prompt. The timeout is then changed to 5 seconds when it looks for the
-password prompt.
-.LP
-The timeout, once changed, remains in effect until it is changed again.
-.SH SENDING EOT
-The special reply string of \fIEOT\fR indicates that the chat program
-should send an EOT character to the remote. This is normally the
-End-of-file character sequence. A return character is not sent
-following the EOT.
-.PR
-The EOT sequence may be embedded into the send string using the
-sequence \fI^D\fR.
-.SH GENERATING BREAK
-The special reply string of \fIBREAK\fR will cause a break condition
-to be sent. The break is a special signal on the transmitter. The
-normal processing on the receiver is to change the transmission rate.
-It may be used to cycle through the available transmission rates on
-the remote until you are able to receive a valid login prompt.
-.PR
-The break sequence may be embedded into the send string using the
-\fI\\K\fR sequence.
-.SH ESCAPE SEQUENCES
-The expect and reply strings may contain escape sequences. All of the
-sequences are legal in the reply string. Many are legal in the expect.
-Those which are not valid in the expect sequence are so indicated.
-.TP
-.B ''
-Expects or sends a null string. If you send a null string then it will still
-send the return character. This sequence may either be a pair of apostrophe
-or quote characters.
-.TP
-.B \\\\b
-represents a backspace character.
-.TP
-.B \\\\c
-Suppresses the newline at the end of the reply string. This is the only
-method to send a string without a trailing return character. It must
-be at the end of the send string. For example,
-the sequence hello\\c will simply send the characters h, e, l, l, o.
-.I (not valid in expect.)
-.TP
-.B \\\\d
-Delay for one second. The program uses sleep(1) which will delay to a
-maximum of one second.
-.I (not valid in expect.)
-.TP
-.B \\\\K
-Insert a BREAK
-.I (not valid in expect.)
-.TP
-.B \\\\n
-Send a newline or linefeed character.
-.TP
-.B \\\\N
-Send a null character. The same sequence may be represented by \\0.
-.I (not valid in expect.)
-.TP
-.B \\\\p
-Pause for a fraction of a second. The delay is 1/10th of a second.
-.I (not valid in expect.)
-.TP
-.B \\\\q
-Suppress writing the string to the SYSLOG file. The string ?????? is
-written to the log in its place.
-.I (not valid in expect.)
-.TP
-.B \\\\r
-Send or expect a carriage return.
-.TP
-.B \\\\s
-Represents a space character in the string. This may be used when it
-is not desirable to quote the strings which contains spaces. The
-sequence 'HI TIM' and HI\\sTIM are the same.
-.TP
-.B \\\\t
-Send or expect a tab character.
-.TP
-.B \\\\T
-Send the phone number string as specified with the \fI-T\fR option
-.I (not valid in expect.)
-.TP
-.B \\\\U
-Send the phone number 2 string as specified with the \fI-U\fR option
-.I (not valid in expect.)
-.TP
-.B \\\\\\\\
-Send or expect a backslash character.
-.TP
-.B \\\\ddd
-Collapse the octal digits (ddd) into a single ASCII character and send that
-character.
-.I (some characters are not valid in expect.)
-.TP
-.B \^^C
-Substitute the sequence with the control character represented by C.
-For example, the character DC1 (17) is shown as \^^Q.
-.I (some characters are not valid in expect.)
-.SH ENVIRONMENT VARIABLES
-Environment variables are available within chat scripts, if the \fI-E\fR
-option was specified in the command line. The metacharacter \fI$\fR is used
-to introduce the name of the environment variable to substitute. If the
-substition fails, because the requested environment variable is not set,
-\fInothing\fR is replaced for the variable.
-.SH TERMINATION CODES
-The \fIchat\fR program will terminate with the following completion
-codes.
-.TP
-.B 0
-The normal termination of the program. This indicates that the script
-was executed without error to the normal conclusion.
-.TP
-.B 1
-One or more of the parameters are invalid or an expect string was too
-large for the internal buffers. This indicates that the program as not
-properly executed.
-.TP
-.B 2
-An error occurred during the execution of the program. This may be due
-to a read or write operation failing for some reason or chat receiving
-a signal such as SIGINT.
-.TP
-.B 3
-A timeout event occurred when there was an \fIexpect\fR string without
-having a "-subsend" string. This may mean that you did not program the
-script correctly for the condition or that some unexpected event has
-occurred and the expected string could not be found.
-.TP
-.B 4
-The first string marked as an \fIABORT\fR condition occurred.
-.TP
-.B 5
-The second string marked as an \fIABORT\fR condition occurred.
-.TP
-.B 6
-The third string marked as an \fIABORT\fR condition occurred.
-.TP
-.B 7
-The fourth string marked as an \fIABORT\fR condition occurred.
-.TP
-.B ...
-The other termination codes are also strings marked as an \fIABORT\fR
-condition.
-.LP
-Using the termination code, it is possible to determine which event
-terminated the script. It is possible to decide if the string "BUSY"
-was received from the modem as opposed to "NO DIAL TONE". While the
-first event may be retried, the second will probably have little
-chance of succeeding during a retry.
-.SH SEE ALSO
-Additional information about \fIchat\fR scripts may be found with UUCP
-documentation. The \fIchat\fR script was taken from the ideas proposed
-by the scripts used by the \fIuucico\fR program.
-.LP
-uucico(1), uucp(1)
-.SH COPYRIGHT
-The \fIchat\fR program is in public domain. This is not the GNU public
-license. If it breaks then you get to keep both pieces.
diff --git a/mdk-stage1/ppp/chat/chat.c b/mdk-stage1/ppp/chat/chat.c
deleted file mode 100644
index 1b22907a8..000000000
--- a/mdk-stage1/ppp/chat/chat.c
+++ /dev/null
@@ -1,1756 +0,0 @@
-/*
- * Chat -- a program for automatic session establishment (i.e. dial
- * the phone and log in).
- *
- * Standard termination codes:
- * 0 - successful completion of the script
- * 1 - invalid argument, expect string too large, etc.
- * 2 - error on an I/O operation or fatal error condition.
- * 3 - timeout waiting for a simple string.
- * 4 - the first string declared as "ABORT"
- * 5 - the second string declared as "ABORT"
- * 6 - ... and so on for successive ABORT strings.
- *
- * This software is in the public domain.
- *
- * -----------------
- * 22-May-99 added environment substitutuion, enabled with -E switch.
- * Andreas Arens <andras@cityweb.de>.
- *
- * 12-May-99 added a feature to read data to be sent from a file,
- * if the send string starts with @. Idea from gpk <gpk@onramp.net>.
- *
- * added -T and -U option and \T and \U substitution to pass a phone
- * number into chat script. Two are needed for some ISDN TA applications.
- * Keith Dart <kdart@cisco.com>
- *
- *
- * Added SAY keyword to send output to stderr.
- * This allows to turn ECHO OFF and to output specific, user selected,
- * text to give progress messages. This best works when stderr
- * exists (i.e.: pppd in nodetach mode).
- *
- * Added HANGUP directives to allow for us to be called
- * back. When HANGUP is set to NO, chat will not hangup at HUP signal.
- * We rely on timeouts in that case.
- *
- * Added CLR_ABORT to clear previously set ABORT string. This has been
- * dictated by the HANGUP above as "NO CARRIER" (for example) must be
- * an ABORT condition until we know the other host is going to close
- * the connection for call back. As soon as we have completed the
- * first stage of the call back sequence, "NO CARRIER" is a valid, non
- * fatal string. As soon as we got called back (probably get "CONNECT"),
- * we should re-arm the ABORT "NO CARRIER". Hence the CLR_ABORT command.
- * Note that CLR_ABORT packs the abort_strings[] array so that we do not
- * have unused entries not being reclaimed.
- *
- * In the same vein as above, added CLR_REPORT keyword.
- *
- * Allow for comments. Line starting with '#' are comments and are
- * ignored. If a '#' is to be expected as the first character, the
- * expect string must be quoted.
- *
- *
- * Francis Demierre <Francis@SwissMail.Com>
- * Thu May 15 17:15:40 MET DST 1997
- *
- *
- * Added -r "report file" switch & REPORT keyword.
- * Robert Geer <bgeer@xmission.com>
- *
- * Added -s "use stderr" and -S "don't use syslog" switches.
- * June 18, 1997
- * Karl O. Pinc <kop@meme.com>
- *
- *
- * Added -e "echo" switch & ECHO keyword
- * Dick Streefland <dicks@tasking.nl>
- *
- *
- * Considerable updates and modifications by
- * Al Longyear <longyear@pobox.com>
- * Paul Mackerras <paulus@cs.anu.edu.au>
- *
- *
- * The original author is:
- *
- * Karl Fox <karl@MorningStar.Com>
- * Morning Star Technologies, Inc.
- * 1760 Zollinger Road
- * Columbus, OH 43221
- * (614)451-1883
- *
- */
-
-#ifndef __STDC__
-#define const
-#endif
-
-#ifndef lint
-static const char rcsid[] = "$Id$";
-#endif
-
-#include <stdio.h>
-#include <ctype.h>
-#include <time.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <syslog.h>
-
-#ifndef TERMIO
-#undef TERMIOS
-#define TERMIOS
-#endif
-
-#ifdef TERMIO
-#include <termio.h>
-#endif
-#ifdef TERMIOS
-#include <termios.h>
-#endif
-
-#define STR_LEN 1024
-
-#ifndef SIGTYPE
-#define SIGTYPE void
-#endif
-
-#undef __P
-#undef __V
-
-#ifdef __STDC__
-#include <stdarg.h>
-#define __V(x) x
-#define __P(x) x
-#else
-#include <varargs.h>
-#define __V(x) (va_alist) va_dcl
-#define __P(x) ()
-#define const
-#endif
-
-#ifndef O_NONBLOCK
-#define O_NONBLOCK O_NDELAY
-#endif
-
-#ifdef SUNOS
-extern int sys_nerr;
-extern char *sys_errlist[];
-#define memmove(to, from, n) bcopy(from, to, n)
-#define strerror(n) ((unsigned)(n) < sys_nerr? sys_errlist[(n)] :\
- "unknown error")
-#endif
-
-/*************** Micro getopt() *********************************************/
-#define OPTION(c,v) (_O&2&&**v?*(*v)++:!c||_O&4?0:(!(_O&1)&& \
- (--c,++v),_O=4,c&&**v=='-'&&v[0][1]?*++*v=='-'\
- &&!v[0][1]?(--c,++v,0):(_O=2,*(*v)++):0))
-#define OPTARG(c,v) (_O&2?**v||(++v,--c)?(_O=1,--c,*v++): \
- (_O=4,(char*)0):(char*)0)
-#define OPTONLYARG(c,v) (_O&2&&**v?(_O=1,--c,*v++):(char*)0)
-#define ARG(c,v) (c?(--c,*v++):(char*)0)
-
-static int _O = 0; /* Internal state */
-/*************** Micro getopt() *********************************************/
-
-char *program_name;
-
-#define MAX_ABORTS 50
-#define MAX_REPORTS 50
-#define DEFAULT_CHAT_TIMEOUT 45
-
-int echo = 0;
-int verbose = 0;
-int to_log = 1;
-int to_stderr = 0;
-int Verbose = 0;
-int quiet = 0;
-int report = 0;
-int use_env = 0;
-int exit_code = 0;
-FILE* report_fp = (FILE *) 0;
-char *report_file = (char *) 0;
-char *chat_file = (char *) 0;
-char *phone_num = (char *) 0;
-char *phone_num2 = (char *) 0;
-int timeout = DEFAULT_CHAT_TIMEOUT;
-
-int have_tty_parameters = 0;
-
-#ifdef TERMIO
-#define term_parms struct termio
-#define get_term_param(param) ioctl(0, TCGETA, param)
-#define set_term_param(param) ioctl(0, TCSETA, param)
-struct termio saved_tty_parameters;
-#endif
-
-#ifdef TERMIOS
-#define term_parms struct termios
-#define get_term_param(param) tcgetattr(0, param)
-#define set_term_param(param) tcsetattr(0, TCSANOW, param)
-struct termios saved_tty_parameters;
-#endif
-
-char *abort_string[MAX_ABORTS], *fail_reason = (char *)0,
- fail_buffer[50];
-int n_aborts = 0, abort_next = 0, timeout_next = 0, echo_next = 0;
-int clear_abort_next = 0;
-
-char *report_string[MAX_REPORTS] ;
-char report_buffer[50] ;
-int n_reports = 0, report_next = 0, report_gathering = 0 ;
-int clear_report_next = 0;
-
-int say_next = 0, hup_next = 0;
-
-void *dup_mem __P((void *b, size_t c));
-void *copy_of __P((char *s));
-void usage __P((void));
-void logf __P((const char *fmt, ...));
-void fatal __P((int code, const char *fmt, ...));
-SIGTYPE sigalrm __P((int signo));
-SIGTYPE sigint __P((int signo));
-SIGTYPE sigterm __P((int signo));
-SIGTYPE sighup __P((int signo));
-void unalarm __P((void));
-void init __P((void));
-void set_tty_parameters __P((void));
-void echo_stderr __P((int));
-void break_sequence __P((void));
-void terminate __P((int status));
-void do_file __P((char *chat_file));
-int get_string __P((register char *string));
-int put_string __P((register char *s));
-int write_char __P((int c));
-int put_char __P((int c));
-int get_char __P((void));
-void chat_send __P((register char *s));
-char *character __P((int c));
-void chat_expect __P((register char *s));
-char *clean __P((register char *s, int sending));
-void break_sequence __P((void));
-void terminate __P((int status));
-void pack_array __P((char **array, int end));
-char *expect_strtok __P((char *, char *));
-int vfmtmsg __P((char *, int, const char *, va_list)); /* vsprintf++ */
-
-int main __P((int, char *[]));
-
-void *dup_mem(b, c)
-void *b;
-size_t c;
-{
- void *ans = malloc (c);
- if (!ans)
- fatal(2, "memory error!");
-
- memcpy (ans, b, c);
- return ans;
-}
-
-void *copy_of (s)
-char *s;
-{
- return dup_mem (s, strlen (s) + 1);
-}
-
-/*
- * chat [ -v ] [ -E ] [ -T number ] [ -U number ] [ -t timeout ] [ -f chat-file ] \
- * [ -r report-file ] \
- * [...[[expect[-say[-expect...]] say expect[-say[-expect]] ...]]]
- *
- * Perform a UUCP-dialer-like chat script on stdin and stdout.
- */
-int
-main(argc, argv)
- int argc;
- char **argv;
-{
- int option;
- char *arg;
-
- program_name = *argv;
- tzset();
-
- while ((option = OPTION(argc, argv)) != 0) {
- switch (option) {
- case 'e':
- ++echo;
- break;
-
- case 'E':
- ++use_env;
- break;
-
- case 'v':
- ++verbose;
- break;
-
- case 'V':
- ++Verbose;
- break;
-
- case 's':
- ++to_stderr;
- break;
-
- case 'S':
- to_log = 0;
- break;
-
- case 'f':
- if ((arg = OPTARG(argc, argv)) != NULL)
- chat_file = copy_of(arg);
- else
- usage();
- break;
-
- case 't':
- if ((arg = OPTARG(argc, argv)) != NULL)
- timeout = atoi(arg);
- else
- usage();
- break;
-
- case 'r':
- arg = OPTARG (argc, argv);
- if (arg) {
- if (report_fp != NULL)
- fclose (report_fp);
- report_file = copy_of (arg);
- report_fp = fopen (report_file, "a");
- if (report_fp != NULL) {
- if (verbose)
- fprintf (report_fp, "Opening \"%s\"...\n",
- report_file);
- report = 1;
- }
- }
- break;
-
- case 'T':
- if ((arg = OPTARG(argc, argv)) != NULL)
- phone_num = copy_of(arg);
- else
- usage();
- break;
-
- case 'U':
- if ((arg = OPTARG(argc, argv)) != NULL)
- phone_num2 = copy_of(arg);
- else
- usage();
- break;
-
- default:
- usage();
- break;
- }
- }
-/*
- * Default the report file to the stderr location
- */
- if (report_fp == NULL)
- report_fp = stderr;
-
- if (to_log) {
-#ifdef ultrix
- openlog("chat", LOG_PID);
-#else
- openlog("chat", LOG_PID | LOG_NDELAY, LOG_LOCAL2);
-
- if (verbose)
- setlogmask(LOG_UPTO(LOG_INFO));
- else
- setlogmask(LOG_UPTO(LOG_WARNING));
-#endif
- }
-
- init();
-
- if (chat_file != NULL) {
- arg = ARG(argc, argv);
- if (arg != NULL)
- usage();
- else
- do_file (chat_file);
- } else {
- while ((arg = ARG(argc, argv)) != NULL) {
- chat_expect(arg);
-
- if ((arg = ARG(argc, argv)) != NULL)
- chat_send(arg);
- }
- }
-
- terminate(0);
- return 0;
-}
-
-/*
- * Process a chat script when read from a file.
- */
-
-void do_file (chat_file)
-char *chat_file;
-{
- int linect, sendflg;
- char *sp, *arg, quote;
- char buf [STR_LEN];
- FILE *cfp;
-
- cfp = fopen (chat_file, "r");
- if (cfp == NULL)
- fatal(1, "%s -- open failed: %m", chat_file);
-
- linect = 0;
- sendflg = 0;
-
- while (fgets(buf, STR_LEN, cfp) != NULL) {
- sp = strchr (buf, '\n');
- if (sp)
- *sp = '\0';
-
- linect++;
- sp = buf;
-
- /* lines starting with '#' are comments. If a real '#'
- is to be expected, it should be quoted .... */
- if ( *sp == '#' )
- continue;
-
- while (*sp != '\0') {
- if (*sp == ' ' || *sp == '\t') {
- ++sp;
- continue;
- }
-
- if (*sp == '"' || *sp == '\'') {
- quote = *sp++;
- arg = sp;
- while (*sp != quote) {
- if (*sp == '\0')
- fatal(1, "unterminated quote (line %d)", linect);
-
- if (*sp++ == '\\') {
- if (*sp != '\0')
- ++sp;
- }
- }
- }
- else {
- arg = sp;
- while (*sp != '\0' && *sp != ' ' && *sp != '\t')
- ++sp;
- }
-
- if (*sp != '\0')
- *sp++ = '\0';
-
- if (sendflg)
- chat_send (arg);
- else
- chat_expect (arg);
- sendflg = !sendflg;
- }
- }
- fclose (cfp);
-}
-
-/*
- * We got an error parsing the command line.
- */
-void usage()
-{
- fprintf(stderr, "\
-Usage: %s [-e] [-E] [-v] [-V] [-t timeout] [-r report-file]\n\
- [-T phone-number] [-U phone-number2] {-f chat-file | chat-script}\n", program_name);
- exit(1);
-}
-
-char line[1024];
-
-/*
- * Send a message to syslog and/or stderr.
- */
-void logf __V((const char *fmt, ...))
-{
- va_list args;
-
-#ifdef __STDC__
- va_start(args, fmt);
-#else
- char *fmt;
- va_start(args);
- fmt = va_arg(args, char *);
-#endif
-
- vfmtmsg(line, sizeof(line), fmt, args);
- if (to_log)
- syslog(LOG_INFO, "%s", line);
- if (to_stderr)
- fprintf(stderr, "%s\n", line);
-}
-
-/*
- * Print an error message and terminate.
- */
-
-void fatal __V((int code, const char *fmt, ...))
-{
- va_list args;
-
-#ifdef __STDC__
- va_start(args, fmt);
-#else
- int code;
- char *fmt;
- va_start(args);
- code = va_arg(args, int);
- fmt = va_arg(args, char *);
-#endif
-
- vfmtmsg(line, sizeof(line), fmt, args);
- if (to_log)
- syslog(LOG_ERR, "%s", line);
- if (to_stderr)
- fprintf(stderr, "%s\n", line);
- terminate(code);
-}
-
-int alarmed = 0;
-
-SIGTYPE sigalrm(signo)
-int signo;
-{
- int flags;
-
- alarm(1);
- alarmed = 1; /* Reset alarm to avoid race window */
- signal(SIGALRM, sigalrm); /* that can cause hanging in read() */
-
- if ((flags = fcntl(0, F_GETFL, 0)) == -1)
- fatal(2, "Can't get file mode flags on stdin: %m");
-
- if (fcntl(0, F_SETFL, flags | O_NONBLOCK) == -1)
- fatal(2, "Can't set file mode flags on stdin: %m");
-
- if (verbose)
- logf("alarm");
-}
-
-void unalarm()
-{
- int flags;
-
- if ((flags = fcntl(0, F_GETFL, 0)) == -1)
- fatal(2, "Can't get file mode flags on stdin: %m");
-
- if (fcntl(0, F_SETFL, flags & ~O_NONBLOCK) == -1)
- fatal(2, "Can't set file mode flags on stdin: %m");
-}
-
-SIGTYPE sigint(signo)
-int signo;
-{
- fatal(2, "SIGINT");
-}
-
-SIGTYPE sigterm(signo)
-int signo;
-{
- fatal(2, "SIGTERM");
-}
-
-SIGTYPE sighup(signo)
-int signo;
-{
- fatal(2, "SIGHUP");
-}
-
-void init()
-{
- signal(SIGINT, sigint);
- signal(SIGTERM, sigterm);
- signal(SIGHUP, sighup);
-
- set_tty_parameters();
- signal(SIGALRM, sigalrm);
- alarm(0);
- alarmed = 0;
-}
-
-void set_tty_parameters()
-{
-#if defined(get_term_param)
- term_parms t;
-
- if (get_term_param (&t) < 0)
- fatal(2, "Can't get terminal parameters: %m");
-
- saved_tty_parameters = t;
- have_tty_parameters = 1;
-
- t.c_iflag |= IGNBRK | ISTRIP | IGNPAR;
- t.c_oflag = 0;
- t.c_lflag = 0;
- t.c_cc[VERASE] =
- t.c_cc[VKILL] = 0;
- t.c_cc[VMIN] = 1;
- t.c_cc[VTIME] = 0;
-
- if (set_term_param (&t) < 0)
- fatal(2, "Can't set terminal parameters: %m");
-#endif
-}
-
-void break_sequence()
-{
-#ifdef TERMIOS
- tcsendbreak (0, 0);
-#endif
-}
-
-void terminate(status)
-int status;
-{
- static int terminating = 0;
-
- if (terminating)
- exit(status);
- terminating = 1;
- echo_stderr(-1);
-/*
- * Allow the last of the report string to be gathered before we terminate.
- */
- if (report_gathering) {
- int c, rep_len;
-
- rep_len = strlen(report_buffer);
- while (rep_len + 1 <= sizeof(report_buffer)) {
- alarm(1);
- c = get_char();
- alarm(0);
- if (c < 0 || iscntrl(c))
- break;
- report_buffer[rep_len] = c;
- ++rep_len;
- }
- report_buffer[rep_len] = 0;
- fprintf (report_fp, "chat: %s\n", report_buffer);
- }
- if (report_file != (char *) 0 && report_fp != (FILE *) NULL) {
- if (verbose)
- fprintf (report_fp, "Closing \"%s\".\n", report_file);
- fclose (report_fp);
- report_fp = (FILE *) NULL;
- }
-
-#if defined(get_term_param)
- if (have_tty_parameters) {
- if (set_term_param (&saved_tty_parameters) < 0)
- fatal(2, "Can't restore terminal parameters: %m");
- }
-#endif
-
- exit(status);
-}
-
-/*
- * 'Clean up' this string.
- */
-char *clean(s, sending)
-register char *s;
-int sending; /* set to 1 when sending (putting) this string. */
-{
- char temp[STR_LEN], env_str[STR_LEN], cur_chr;
- register char *s1, *phchar;
- int add_return = sending;
-#define isoctal(chr) (((chr) >= '0') && ((chr) <= '7'))
-#define isalnumx(chr) ((((chr) >= '0') && ((chr) <= '9')) \
- || (((chr) >= 'a') && ((chr) <= 'z')) \
- || (((chr) >= 'A') && ((chr) <= 'Z')) \
- || (chr) == '_')
-
- s1 = temp;
- while (*s) {
- cur_chr = *s++;
- if (cur_chr == '^') {
- cur_chr = *s++;
- if (cur_chr == '\0') {
- *s1++ = '^';
- break;
- }
- cur_chr &= 0x1F;
- if (cur_chr != 0) {
- *s1++ = cur_chr;
- }
- continue;
- }
-
- if (use_env && cur_chr == '$') { /* ARI */
- phchar = env_str;
- while (isalnumx(*s))
- *phchar++ = *s++;
- *phchar = '\0';
- phchar = getenv(env_str);
- if (phchar)
- while (*phchar)
- *s1++ = *phchar++;
- continue;
- }
-
- if (cur_chr != '\\') {
- *s1++ = cur_chr;
- continue;
- }
-
- cur_chr = *s++;
- if (cur_chr == '\0') {
- if (sending) {
- *s1++ = '\\';
- *s1++ = '\\';
- }
- break;
- }
-
- switch (cur_chr) {
- case 'b':
- *s1++ = '\b';
- break;
-
- case 'c':
- if (sending && *s == '\0')
- add_return = 0;
- else
- *s1++ = cur_chr;
- break;
-
- case '\\':
- case 'K':
- case 'p':
- case 'd':
- if (sending)
- *s1++ = '\\';
- *s1++ = cur_chr;
- break;
-
- case 'T':
- if (sending && phone_num) {
- for (phchar = phone_num; *phchar != '\0'; phchar++)
- *s1++ = *phchar;
- }
- else {
- *s1++ = '\\';
- *s1++ = 'T';
- }
- break;
-
- case 'U':
- if (sending && phone_num2) {
- for (phchar = phone_num2; *phchar != '\0'; phchar++)
- *s1++ = *phchar;
- }
- else {
- *s1++ = '\\';
- *s1++ = 'U';
- }
- break;
-
- case 'q':
- quiet = 1;
- break;
-
- case 'r':
- *s1++ = '\r';
- break;
-
- case 'n':
- *s1++ = '\n';
- break;
-
- case 's':
- *s1++ = ' ';
- break;
-
- case 't':
- *s1++ = '\t';
- break;
-
- case 'N':
- if (sending) {
- *s1++ = '\\';
- *s1++ = '\0';
- }
- else
- *s1++ = 'N';
- break;
-
- case '$': /* ARI */
- if (use_env) {
- *s1++ = cur_chr;
- break;
- }
- /* FALL THROUGH */
-
- default:
- if (isoctal (cur_chr)) {
- cur_chr &= 0x07;
- if (isoctal (*s)) {
- cur_chr <<= 3;
- cur_chr |= *s++ - '0';
- if (isoctal (*s)) {
- cur_chr <<= 3;
- cur_chr |= *s++ - '0';
- }
- }
-
- if (cur_chr != 0 || sending) {
- if (sending && (cur_chr == '\\' || cur_chr == 0))
- *s1++ = '\\';
- *s1++ = cur_chr;
- }
- break;
- }
-
- if (sending)
- *s1++ = '\\';
- *s1++ = cur_chr;
- break;
- }
- }
-
- if (add_return)
- *s1++ = '\r';
-
- *s1++ = '\0'; /* guarantee closure */
- *s1++ = '\0'; /* terminate the string */
- return dup_mem (temp, (size_t) (s1 - temp)); /* may have embedded nuls */
-}
-
-/*
- * A modified version of 'strtok'. This version skips \ sequences.
- */
-
-char *expect_strtok (s, term)
- char *s, *term;
-{
- static char *str = "";
- int escape_flag = 0;
- char *result;
-
-/*
- * If a string was specified then do initial processing.
- */
- if (s)
- str = s;
-
-/*
- * If this is the escape flag then reset it and ignore the character.
- */
- if (*str)
- result = str;
- else
- result = (char *) 0;
-
- while (*str) {
- if (escape_flag) {
- escape_flag = 0;
- ++str;
- continue;
- }
-
- if (*str == '\\') {
- ++str;
- escape_flag = 1;
- continue;
- }
-
-/*
- * If this is not in the termination string, continue.
- */
- if (strchr (term, *str) == (char *) 0) {
- ++str;
- continue;
- }
-
-/*
- * This is the terminator. Mark the end of the string and stop.
- */
- *str++ = '\0';
- break;
- }
- return (result);
-}
-
-/*
- * Process the expect string
- */
-
-void chat_expect (s)
-char *s;
-{
- char *expect;
- char *reply;
-
- if (strcmp(s, "HANGUP") == 0) {
- ++hup_next;
- return;
- }
-
- if (strcmp(s, "ABORT") == 0) {
- ++abort_next;
- return;
- }
-
- if (strcmp(s, "CLR_ABORT") == 0) {
- ++clear_abort_next;
- return;
- }
-
- if (strcmp(s, "REPORT") == 0) {
- ++report_next;
- return;
- }
-
- if (strcmp(s, "CLR_REPORT") == 0) {
- ++clear_report_next;
- return;
- }
-
- if (strcmp(s, "TIMEOUT") == 0) {
- ++timeout_next;
- return;
- }
-
- if (strcmp(s, "ECHO") == 0) {
- ++echo_next;
- return;
- }
-
- if (strcmp(s, "SAY") == 0) {
- ++say_next;
- return;
- }
-
-/*
- * Fetch the expect and reply string.
- */
- for (;;) {
- expect = expect_strtok (s, "-");
- s = (char *) 0;
-
- if (expect == (char *) 0)
- return;
-
- reply = expect_strtok (s, "-");
-
-/*
- * Handle the expect string. If successful then exit.
- */
- if (get_string (expect))
- return;
-
-/*
- * If there is a sub-reply string then send it. Otherwise any condition
- * is terminal.
- */
- if (reply == (char *) 0 || exit_code != 3)
- break;
-
- chat_send (reply);
- }
-
-/*
- * The expectation did not occur. This is terminal.
- */
- if (fail_reason)
- logf("Failed (%s)", fail_reason);
- else
- logf("Failed");
- terminate(exit_code);
-}
-
-/*
- * Translate the input character to the appropriate string for printing
- * the data.
- */
-
-char *character(c)
-int c;
-{
- static char string[10];
- char *meta;
-
- meta = (c & 0x80) ? "M-" : "";
- c &= 0x7F;
-
- if (c < 32)
- sprintf(string, "%s^%c", meta, (int)c + '@');
- else if (c == 127)
- sprintf(string, "%s^?", meta);
- else
- sprintf(string, "%s%c", meta, c);
-
- return (string);
-}
-
-/*
- * process the reply string
- */
-void chat_send (s)
-register char *s;
-{
- char file_data[STR_LEN];
-
- if (say_next) {
- say_next = 0;
- s = clean(s, 1);
- write(2, s, strlen(s));
- free(s);
- return;
- }
-
- if (hup_next) {
- hup_next = 0;
- if (strcmp(s, "OFF") == 0)
- signal(SIGHUP, SIG_IGN);
- else
- signal(SIGHUP, sighup);
- return;
- }
-
- if (echo_next) {
- echo_next = 0;
- echo = (strcmp(s, "ON") == 0);
- return;
- }
-
- if (abort_next) {
- char *s1;
-
- abort_next = 0;
-
- if (n_aborts >= MAX_ABORTS)
- fatal(2, "Too many ABORT strings");
-
- s1 = clean(s, 0);
-
- if (strlen(s1) > strlen(s)
- || strlen(s1) + 1 > sizeof(fail_buffer))
- fatal(1, "Illegal or too-long ABORT string ('%v')", s);
-
- abort_string[n_aborts++] = s1;
-
- if (verbose)
- logf("abort on (%v)", s);
- return;
- }
-
- if (clear_abort_next) {
- char *s1;
- int i;
- int old_max;
- int pack = 0;
-
- clear_abort_next = 0;
-
- s1 = clean(s, 0);
-
- if (strlen(s1) > strlen(s)
- || strlen(s1) + 1 > sizeof(fail_buffer))
- fatal(1, "Illegal or too-long CLR_ABORT string ('%v')", s);
-
- old_max = n_aborts;
- for (i=0; i < n_aborts; i++) {
- if ( strcmp(s1,abort_string[i]) == 0 ) {
- free(abort_string[i]);
- abort_string[i] = NULL;
- pack++;
- n_aborts--;
- if (verbose)
- logf("clear abort on (%v)", s);
- }
- }
- free(s1);
- if (pack)
- pack_array(abort_string,old_max);
- return;
- }
-
- if (report_next) {
- char *s1;
-
- report_next = 0;
- if (n_reports >= MAX_REPORTS)
- fatal(2, "Too many REPORT strings");
-
- s1 = clean(s, 0);
-
- if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1)
- fatal(1, "Illegal or too-long REPORT string ('%v')", s);
-
- report_string[n_reports++] = s1;
-
- if (verbose)
- logf("report (%v)", s);
- return;
- }
-
- if (clear_report_next) {
- char *s1;
- int i;
- int old_max;
- int pack = 0;
-
- clear_report_next = 0;
-
- s1 = clean(s, 0);
-
- if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1)
- fatal(1, "Illegal or too-long REPORT string ('%v')", s);
-
- old_max = n_reports;
- for (i=0; i < n_reports; i++) {
- if ( strcmp(s1,report_string[i]) == 0 ) {
- free(report_string[i]);
- report_string[i] = NULL;
- pack++;
- n_reports--;
- if (verbose)
- logf("clear report (%v)", s);
- }
- }
- free(s1);
- if (pack)
- pack_array(report_string,old_max);
-
- return;
- }
-
- if (timeout_next) {
- timeout_next = 0;
- timeout = atoi(s);
-
- if (timeout <= 0)
- timeout = DEFAULT_CHAT_TIMEOUT;
-
- if (verbose)
- logf("timeout set to %d seconds", timeout);
-
- return;
- }
-
- /*
- * The syntax @filename means read the string to send from the
- * file `filename'.
- */
- if (s[0] == '@') {
- /* skip the @ and any following white-space */
- char *fn = s;
- while (*++fn == ' ' || *fn == '\t')
- ;
-
- if (*fn != 0) {
- FILE *f;
- int n = 0;
-
- /* open the file and read until STR_LEN-1 bytes or end-of-file */
- f = fopen(fn, "r");
- if (f == NULL)
- fatal(1, "%s -- open failed: %m", fn);
- while (n < STR_LEN - 1) {
- int nr = fread(&file_data[n], 1, STR_LEN - 1 - n, f);
- if (nr < 0)
- fatal(1, "%s -- read error", fn);
- if (nr == 0)
- break;
- n += nr;
- }
- fclose(f);
-
- /* use the string we got as the string to send,
- but trim off the final newline if any. */
- if (n > 0 && file_data[n-1] == '\n')
- --n;
- file_data[n] = 0;
- s = file_data;
- }
- }
-
- if (strcmp(s, "EOT") == 0)
- s = "^D\\c";
- else if (strcmp(s, "BREAK") == 0)
- s = "\\K\\c";
-
- if (!put_string(s))
- fatal(1, "Failed");
-}
-
-int get_char()
-{
- int status;
- char c;
-
- status = read(0, &c, 1);
-
- switch (status) {
- case 1:
- return ((int)c & 0x7F);
-
- default:
- logf("warning: read() on stdin returned %d", status);
-
- case -1:
- if ((status = fcntl(0, F_GETFL, 0)) == -1)
- fatal(2, "Can't get file mode flags on stdin: %m");
-
- if (fcntl(0, F_SETFL, status & ~O_NONBLOCK) == -1)
- fatal(2, "Can't set file mode flags on stdin: %m");
-
- return (-1);
- }
-}
-
-int put_char(c)
-int c;
-{
- int status;
- char ch = c;
-
- usleep(10000); /* inter-character typing delay (?) */
-
- status = write(1, &ch, 1);
-
- switch (status) {
- case 1:
- return (0);
-
- default:
- logf("warning: write() on stdout returned %d", status);
-
- case -1:
- if ((status = fcntl(0, F_GETFL, 0)) == -1)
- fatal(2, "Can't get file mode flags on stdin, %m");
-
- if (fcntl(0, F_SETFL, status & ~O_NONBLOCK) == -1)
- fatal(2, "Can't set file mode flags on stdin: %m");
-
- return (-1);
- }
-}
-
-int write_char (c)
-int c;
-{
- if (alarmed || put_char(c) < 0) {
- alarm(0);
- alarmed = 0;
-
- if (verbose) {
- if (errno == EINTR || errno == EWOULDBLOCK)
- logf(" -- write timed out");
- else
- logf(" -- write failed: %m");
- }
- return (0);
- }
- return (1);
-}
-
-int put_string (s)
-register char *s;
-{
- quiet = 0;
- s = clean(s, 1);
-
- if (verbose) {
- if (quiet)
- logf("send (??????)");
- else
- logf("send (%v)", s);
- }
-
- alarm(timeout); alarmed = 0;
-
- while (*s) {
- register char c = *s++;
-
- if (c != '\\') {
- if (!write_char (c))
- return 0;
- continue;
- }
-
- c = *s++;
- switch (c) {
- case 'd':
- sleep(1);
- break;
-
- case 'K':
- break_sequence();
- break;
-
- case 'p':
- usleep(10000); /* 1/100th of a second (arg is microseconds) */
- break;
-
- default:
- if (!write_char (c))
- return 0;
- break;
- }
- }
-
- alarm(0);
- alarmed = 0;
- return (1);
-}
-
-/*
- * Echo a character to stderr.
- * When called with -1, a '\n' character is generated when
- * the cursor is not at the beginning of a line.
- */
-void echo_stderr(n)
-int n;
-{
- static int need_lf;
- char *s;
-
- switch (n) {
- case '\r': /* ignore '\r' */
- break;
- case -1:
- if (need_lf == 0)
- break;
- /* fall through */
- case '\n':
- write(2, "\n", 1);
- need_lf = 0;
- break;
- default:
- s = character(n);
- write(2, s, strlen(s));
- need_lf = 1;
- break;
- }
-}
-
-/*
- * 'Wait for' this string to appear on this file descriptor.
- */
-int get_string(string)
-register char *string;
-{
- char temp[STR_LEN];
- int c, printed = 0, len, minlen;
- register char *s = temp, *end = s + STR_LEN;
- char *logged = temp;
-
- fail_reason = (char *)0;
- string = clean(string, 0);
- len = strlen(string);
- minlen = (len > sizeof(fail_buffer)? len: sizeof(fail_buffer)) - 1;
-
- if (verbose)
- logf("expect (%v)", string);
-
- if (len > STR_LEN) {
- logf("expect string is too long");
- exit_code = 1;
- return 0;
- }
-
- if (len == 0) {
- if (verbose)
- logf("got it");
- return (1);
- }
-
- alarm(timeout);
- alarmed = 0;
-
- while ( ! alarmed && (c = get_char()) >= 0) {
- int n, abort_len, report_len;
-
- if (echo)
- echo_stderr(c);
- if (verbose && c == '\n') {
- if (s == logged)
- logf(""); /* blank line */
- else
- logf("%0.*v", s - logged, logged);
- logged = s + 1;
- }
-
- *s++ = c;
-
- if (verbose && s >= logged + 80) {
- logf("%0.*v", s - logged, logged);
- logged = s;
- }
-
- if (Verbose) {
- if (c == '\n')
- fputc( '\n', stderr );
- else if (c != '\r')
- fprintf( stderr, "%s", character(c) );
- }
-
- if (!report_gathering) {
- for (n = 0; n < n_reports; ++n) {
- if ((report_string[n] != (char*) NULL) &&
- s - temp >= (report_len = strlen(report_string[n])) &&
- strncmp(s - report_len, report_string[n], report_len) == 0) {
- time_t time_now = time ((time_t*) NULL);
- struct tm* tm_now = localtime (&time_now);
-
- strftime (report_buffer, 20, "%b %d %H:%M:%S ", tm_now);
- strcat (report_buffer, report_string[n]);
-
- report_string[n] = (char *) NULL;
- report_gathering = 1;
- break;
- }
- }
- }
- else {
- if (!iscntrl (c)) {
- int rep_len = strlen (report_buffer);
- report_buffer[rep_len] = c;
- report_buffer[rep_len + 1] = '\0';
- }
- else {
- report_gathering = 0;
- fprintf (report_fp, "chat: %s\n", report_buffer);
- }
- }
-
- if (s - temp >= len &&
- c == string[len - 1] &&
- strncmp(s - len, string, len) == 0) {
- if (verbose) {
- if (s > logged)
- logf("%0.*v", s - logged, logged);
- logf(" -- got it\n");
- }
-
- alarm(0);
- alarmed = 0;
- return (1);
- }
-
- for (n = 0; n < n_aborts; ++n) {
- if (s - temp >= (abort_len = strlen(abort_string[n])) &&
- strncmp(s - abort_len, abort_string[n], abort_len) == 0) {
- if (verbose) {
- if (s > logged)
- logf("%0.*v", s - logged, logged);
- logf(" -- failed");
- }
-
- alarm(0);
- alarmed = 0;
- exit_code = n + 4;
- strcpy(fail_reason = fail_buffer, abort_string[n]);
- return (0);
- }
- }
-
- if (s >= end) {
- if (logged < s - minlen) {
- if (verbose)
- logf("%0.*v", s - logged, logged);
- logged = s;
- }
- s -= minlen;
- memmove(temp, s, minlen);
- logged = temp + (logged - s);
- s = temp + minlen;
- }
-
- if (alarmed && verbose)
- logf("warning: alarm synchronization problem");
- }
-
- alarm(0);
-
- if (verbose && printed) {
- if (alarmed)
- logf(" -- read timed out");
- else
- logf(" -- read failed: %m");
- }
-
- exit_code = 3;
- alarmed = 0;
- return (0);
-}
-
-/*
- * Gross kludge to handle Solaris versions >= 2.6 having usleep.
- */
-#ifdef SOL2
-#include <sys/param.h>
-#if MAXUID > 65536 /* then this is Solaris 2.6 or later */
-#undef NO_USLEEP
-#endif
-#endif /* SOL2 */
-
-#ifdef NO_USLEEP
-#include <sys/types.h>
-#include <sys/time.h>
-
-/*
- usleep -- support routine for 4.2BSD system call emulations
- last edit: 29-Oct-1984 D A Gwyn
- */
-
-extern int select();
-
-int
-usleep( usec ) /* returns 0 if ok, else -1 */
- long usec; /* delay in microseconds */
-{
- static struct { /* `timeval' */
- long tv_sec; /* seconds */
- long tv_usec; /* microsecs */
- } delay; /* _select() timeout */
-
- delay.tv_sec = usec / 1000000L;
- delay.tv_usec = usec % 1000000L;
-
- return select(0, (long *)0, (long *)0, (long *)0, &delay);
-}
-#endif
-
-void
-pack_array (array, end)
- char **array; /* The address of the array of string pointers */
- int end; /* The index of the next free entry before CLR_ */
-{
- int i, j;
-
- for (i = 0; i < end; i++) {
- if (array[i] == NULL) {
- for (j = i+1; j < end; ++j)
- if (array[j] != NULL)
- array[i++] = array[j];
- for (; i < end; ++i)
- array[i] = NULL;
- break;
- }
- }
-}
-
-/*
- * vfmtmsg - format a message into a buffer. Like vsprintf except we
- * also specify the length of the output buffer, and we handle the
- * %m (error message) format.
- * Doesn't do floating-point formats.
- * Returns the number of chars put into buf.
- */
-#define OUTCHAR(c) (buflen > 0? (--buflen, *buf++ = (c)): 0)
-
-int
-vfmtmsg(buf, buflen, fmt, args)
- char *buf;
- int buflen;
- const char *fmt;
- va_list args;
-{
- int c, i, n;
- int width, prec, fillch;
- int base, len, neg, quoted;
- unsigned long val = 0;
- char *str, *buf0;
- const char *f;
- unsigned char *p;
- char num[32];
- static char hexchars[] = "0123456789abcdef";
-
- buf0 = buf;
- --buflen;
- while (buflen > 0) {
- for (f = fmt; *f != '%' && *f != 0; ++f)
- ;
- if (f > fmt) {
- len = f - fmt;
- if (len > buflen)
- len = buflen;
- memcpy(buf, fmt, len);
- buf += len;
- buflen -= len;
- fmt = f;
- }
- if (*fmt == 0)
- break;
- c = *++fmt;
- width = prec = 0;
- fillch = ' ';
- if (c == '0') {
- fillch = '0';
- c = *++fmt;
- }
- if (c == '*') {
- width = va_arg(args, int);
- c = *++fmt;
- } else {
- while (isdigit(c)) {
- width = width * 10 + c - '0';
- c = *++fmt;
- }
- }
- if (c == '.') {
- c = *++fmt;
- if (c == '*') {
- prec = va_arg(args, int);
- c = *++fmt;
- } else {
- while (isdigit(c)) {
- prec = prec * 10 + c - '0';
- c = *++fmt;
- }
- }
- }
- str = 0;
- base = 0;
- neg = 0;
- ++fmt;
- switch (c) {
- case 'd':
- i = va_arg(args, int);
- if (i < 0) {
- neg = 1;
- val = -i;
- } else
- val = i;
- base = 10;
- break;
- case 'o':
- val = va_arg(args, unsigned int);
- base = 8;
- break;
- case 'x':
- val = va_arg(args, unsigned int);
- base = 16;
- break;
- case 'p':
- val = (unsigned long) va_arg(args, void *);
- base = 16;
- neg = 2;
- break;
- case 's':
- str = va_arg(args, char *);
- break;
- case 'c':
- num[0] = va_arg(args, int);
- num[1] = 0;
- str = num;
- break;
- case 'm':
- str = strerror(errno);
- break;
- case 'v': /* "visible" string */
- case 'q': /* quoted string */
- quoted = c == 'q';
- p = va_arg(args, unsigned char *);
- if (fillch == '0' && prec > 0) {
- n = prec;
- } else {
- n = strlen((char *)p);
- if (prec > 0 && prec < n)
- n = prec;
- }
- while (n > 0 && buflen > 0) {
- c = *p++;
- --n;
- if (!quoted && c >= 0x80) {
- OUTCHAR('M');
- OUTCHAR('-');
- c -= 0x80;
- }
- if (quoted && (c == '"' || c == '\\'))
- OUTCHAR('\\');
- if (c < 0x20 || (0x7f <= c && c < 0xa0)) {
- if (quoted) {
- OUTCHAR('\\');
- switch (c) {
- case '\t': OUTCHAR('t'); break;
- case '\n': OUTCHAR('n'); break;
- case '\b': OUTCHAR('b'); break;
- case '\f': OUTCHAR('f'); break;
- default:
- OUTCHAR('x');
- OUTCHAR(hexchars[c >> 4]);
- OUTCHAR(hexchars[c & 0xf]);
- }
- } else {
- if (c == '\t')
- OUTCHAR(c);
- else {
- OUTCHAR('^');
- OUTCHAR(c ^ 0x40);
- }
- }
- } else
- OUTCHAR(c);
- }
- continue;
- default:
- *buf++ = '%';
- if (c != '%')
- --fmt; /* so %z outputs %z etc. */
- --buflen;
- continue;
- }
- if (base != 0) {
- str = num + sizeof(num);
- *--str = 0;
- while (str > num + neg) {
- *--str = hexchars[val % base];
- val = val / base;
- if (--prec <= 0 && val == 0)
- break;
- }
- switch (neg) {
- case 1:
- *--str = '-';
- break;
- case 2:
- *--str = 'x';
- *--str = '0';
- break;
- }
- len = num + sizeof(num) - 1 - str;
- } else {
- len = strlen(str);
- if (prec > 0 && len > prec)
- len = prec;
- }
- if (width > 0) {
- if (width > buflen)
- width = buflen;
- if ((n = width - len) > 0) {
- buflen -= n;
- for (; n > 0; --n)
- *buf++ = fillch;
- }
- }
- if (len > buflen)
- len = buflen;
- memcpy(buf, str, len);
- buf += len;
- buflen -= len;
- }
- *buf = 0;
- return buf - buf0;
-}
diff --git a/mdk-stage1/ppp/common/zlib.c b/mdk-stage1/ppp/common/zlib.c
deleted file mode 100644
index 503076886..000000000
--- a/mdk-stage1/ppp/common/zlib.c
+++ /dev/null
@@ -1,5376 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-1.0.4
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets. See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp and deflateOutputPending
- * - allow strm->next_out to be NULL, meaning discard the output
- *
- * $Id$
- */
-
-/*
- * ==FILEVERSION 971210==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-#define NO_DUMMY_DECL
-#define NO_ZCFUNCS
-#define MY_ZCALLOC
-
-#if defined(__FreeBSD__) && (defined(KERNEL) || defined(_KERNEL))
-#define inflate inflate_ppp /* FreeBSD already has an inflate :-( */
-#endif
-
-
-/* +++ zutil.h */
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.16 1996/07/24 13:41:13 me Exp $ */
-
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#if defined(KERNEL) || defined(_KERNEL)
-/* Assume this is a *BSD or SVR4 kernel */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/systm.h>
-#undef u
-# define HAVE_MEMCPY
-# define memcpy(d, s, n) bcopy((s), (d), (n))
-# define memset(d, v, n) bzero((d), (n))
-# define memcmp bcmp
-
-#else
-#if defined(__KERNEL__)
-/* Assume this is a Linux kernel */
-#include <linux/string.h>
-#define HAVE_MEMCPY
-
-#else /* not kernel */
-
-#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS)
-# include <stddef.h>
-# include <errno.h>
-#else
- extern int errno;
-#endif
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-#endif
-#endif /* __KERNEL__ */
-#endif /* _KERNEL || KERNEL */
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long ulg;
-
-extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
- return (strm->msg = (char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
- /* common constants */
-
-#ifndef DEF_WBITS
-# define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES 2
-/* The three kinds of block type */
-
-#define MIN_MATCH 3
-#define MAX_MATCH 258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
- /* target dependencies */
-
-#ifdef MSDOS
-# define OS_CODE 0x00
-# ifdef __TURBOC__
-# include <alloc.h>
-# else /* MSC or DJGPP */
-# include <malloc.h>
-# endif
-#endif
-
-#ifdef OS2
-# define OS_CODE 0x06
-#endif
-
-#ifdef WIN32 /* Window 95 & Windows NT */
-# define OS_CODE 0x0b
-#endif
-
-#if defined(VAXC) || defined(VMS)
-# define OS_CODE 0x02
-# define FOPEN(name, mode) \
- fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#ifdef AMIGA
-# define OS_CODE 0x01
-#endif
-
-#if defined(ATARI) || defined(atarist)
-# define OS_CODE 0x05
-#endif
-
-#ifdef MACOS
-# define OS_CODE 0x07
-#endif
-
-#ifdef __50SERIES /* Prime/PRIMOS */
-# define OS_CODE 0x0F
-#endif
-
-#ifdef TOPS20
-# define OS_CODE 0x0a
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-# define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
- /* Common defaults */
-
-#ifndef OS_CODE
-# define OS_CODE 0x03 /* assume Unix */
-#endif
-
-#ifndef FOPEN
-# define FOPEN(name, mode) fopen((name), (mode))
-#endif
-
- /* functions */
-
-#ifdef HAVE_STRERROR
- extern char *strerror OF((int));
-# define zstrerror(errnum) strerror(errnum)
-#else
-# define zstrerror(errnum) ""
-#endif
-
-#if defined(pyr)
-# define NO_MEMCPY
-#endif
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER)
- /* Use our own functions for small and medium model with MSC <= 5.0.
- * You may have to use the same strategy for Borland C (untested).
- */
-# define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-# define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-# ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-# define zmemcpy _fmemcpy
-# define zmemcmp _fmemcmp
-# define zmemzero(dest, len) _fmemset(dest, 0, len)
-# else
-# define zmemcpy memcpy
-# define zmemcmp memcmp
-# define zmemzero(dest, len) memset(dest, 0, len)
-# endif
-#else
- extern void zmemcpy OF((Bytef* dest, Bytef* source, uInt len));
- extern int zmemcmp OF((Bytef* s1, Bytef* s2, uInt len));
- extern void zmemzero OF((Bytef* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-# include <stdio.h>
-# ifndef verbose
-# define verbose 0
-# endif
- extern void z_error OF((char *m));
-# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len));
-
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void zcfree OF((voidpf opaque, voidpf ptr));
-
-#define ZALLOC(strm, items, size) \
- (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr) (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* _Z_UTIL_H */
-/* --- zutil.h */
-
-/* +++ deflate.h */
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* From: deflate.h,v 1.10 1996/07/02 12:41:00 me Exp $ */
-
-#ifndef _DEFLATE_H
-#define _DEFLATE_H
-
-/* #include "zutil.h" */
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS 256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES 30
-/* number of distance codes */
-
-#define BL_CODES 19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE 42
-#define BUSY_STATE 113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
- union {
- ush freq; /* frequency count */
- ush code; /* bit string */
- } fc;
- union {
- ush dad; /* father node in Huffman tree */
- ush len; /* length of bit string */
- } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad dl.dad
-#define Len dl.len
-
-typedef struct static_tree_desc_s static_tree_desc;
-
-typedef struct tree_desc_s {
- ct_data *dyn_tree; /* the dynamic tree */
- int max_code; /* largest code with non zero frequency */
- static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct deflate_state {
- z_streamp strm; /* pointer back to this zlib stream */
- int status; /* as the name implies */
- Bytef *pending_buf; /* output still pending */
- ulg pending_buf_size; /* size of pending_buf */
- Bytef *pending_out; /* next pending byte to output to the stream */
- int pending; /* nb of bytes in the pending buffer */
- int noheader; /* suppress zlib header and adler32 */
- Byte data_type; /* UNKNOWN, BINARY or ASCII */
- Byte method; /* STORED (for zip only) or DEFLATED */
- int last_flush; /* value of flush param for previous deflate call */
-
- /* used by deflate.c: */
-
- uInt w_size; /* LZ77 window size (32K by default) */
- uInt w_bits; /* log2(w_size) (8..16) */
- uInt w_mask; /* w_size - 1 */
-
- Bytef *window;
- /* Sliding window. Input bytes are read into the second half of the window,
- * and move to the first half later to keep a dictionary of at least wSize
- * bytes. With this organization, matches are limited to a distance of
- * wSize-MAX_MATCH bytes, but this ensures that IO is always
- * performed with a length multiple of the block size. Also, it limits
- * the window size to 64K, which is quite useful on MSDOS.
- * To do: use the user input buffer as sliding window.
- */
-
- ulg window_size;
- /* Actual size of window: 2*wSize, except when the user input buffer
- * is directly used as sliding window.
- */
-
- Posf *prev;
- /* Link to older string with same hash index. To limit the size of this
- * array to 64K, this link is maintained only for the last 32K strings.
- * An index in this array is thus a window index modulo 32K.
- */
-
- Posf *head; /* Heads of the hash chains or NIL. */
-
- uInt ins_h; /* hash index of string to be inserted */
- uInt hash_size; /* number of elements in hash table */
- uInt hash_bits; /* log2(hash_size) */
- uInt hash_mask; /* hash_size-1 */
-
- uInt hash_shift;
- /* Number of bits by which ins_h must be shifted at each input
- * step. It must be such that after MIN_MATCH steps, the oldest
- * byte no longer takes part in the hash key, that is:
- * hash_shift * MIN_MATCH >= hash_bits
- */
-
- long block_start;
- /* Window position at the beginning of the current output block. Gets
- * negative when the window is moved backwards.
- */
-
- uInt match_length; /* length of best match */
- IPos prev_match; /* previous match */
- int match_available; /* set if previous match exists */
- uInt strstart; /* start of string to insert */
- uInt match_start; /* start of matching string */
- uInt lookahead; /* number of valid bytes ahead in window */
-
- uInt prev_length;
- /* Length of the best match at previous step. Matches not greater than this
- * are discarded. This is used in the lazy match evaluation.
- */
-
- uInt max_chain_length;
- /* To speed up deflation, hash chains are never searched beyond this
- * length. A higher limit improves compression ratio but degrades the
- * speed.
- */
-
- uInt max_lazy_match;
- /* Attempt to find a better match only when the current match is strictly
- * smaller than this value. This mechanism is used only for compression
- * levels >= 4.
- */
-# define max_insert_length max_lazy_match
- /* Insert new strings in the hash table only if the match length is not
- * greater than this length. This saves time but degrades compression.
- * max_insert_length is used only for compression levels <= 3.
- */
-
- int level; /* compression level (1..9) */
- int strategy; /* favor or force Huffman coding*/
-
- uInt good_match;
- /* Use a faster search when the previous match is longer than this */
-
- int nice_match; /* Stop searching when current match exceeds this */
-
- /* used by trees.c: */
- /* Didn't use ct_data typedef below to supress compiler warning */
- struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
- struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
- struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
-
- struct tree_desc_s l_desc; /* desc. for literal tree */
- struct tree_desc_s d_desc; /* desc. for distance tree */
- struct tree_desc_s bl_desc; /* desc. for bit length tree */
-
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
- int heap_len; /* number of elements in the heap */
- int heap_max; /* element of largest frequency */
- /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
- * The same heap array is used to build all trees.
- */
-
- uch depth[2*L_CODES+1];
- /* Depth of each subtree used as tie breaker for trees of equal frequency
- */
-
- uchf *l_buf; /* buffer for literals or lengths */
-
- uInt lit_bufsize;
- /* Size of match buffer for literals/lengths. There are 4 reasons for
- * limiting lit_bufsize to 64K:
- * - frequencies can be kept in 16 bit counters
- * - if compression is not successful for the first block, all input
- * data is still in the window so we can still emit a stored block even
- * when input comes from standard input. (This can also be done for
- * all blocks if lit_bufsize is not greater than 32K.)
- * - if compression is not successful for a file smaller than 64K, we can
- * even emit a stored file instead of a stored block (saving 5 bytes).
- * This is applicable only for zip (not gzip or zlib).
- * - creating new Huffman trees less frequently may not provide fast
- * adaptation to changes in the input data statistics. (Take for
- * example a binary file with poorly compressible code followed by
- * a highly compressible string table.) Smaller buffer sizes give
- * fast adaptation but have of course the overhead of transmitting
- * trees more frequently.
- * - I can't count above 4
- */
-
- uInt last_lit; /* running index in l_buf */
-
- ushf *d_buf;
- /* Buffer for distances. To simplify the code, d_buf and l_buf have
- * the same number of elements. To use different lengths, an extra flag
- * array would be necessary.
- */
-
- ulg opt_len; /* bit length of current block with optimal trees */
- ulg static_len; /* bit length of current block with static trees */
- ulg compressed_len; /* total bit length of compressed file */
- uInt matches; /* number of string matches in current block */
- int last_eob_len; /* bit length of EOB code for last block */
-
-#ifdef DEBUG_ZLIB
- ulg bits_sent; /* bit length of the compressed data */
-#endif
-
- ush bi_buf;
- /* Output buffer. bits are inserted starting at the bottom (least
- * significant bits).
- */
- int bi_valid;
- /* Number of valid bits in bi_buf. All bits above the last valid bit
- * are always zero.
- */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
- /* in trees.c */
-void _tr_init OF((deflate_state *s));
-int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-ulg _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-void _tr_align OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-void _tr_stored_type_only OF((deflate_state *));
-
-#endif
-/* --- deflate.h */
-
-/* +++ deflate.c */
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * ALGORITHM
- *
- * The "deflation" process depends on being able to identify portions
- * of the input text which are identical to earlier input (within a
- * sliding window trailing behind the input currently being processed).
- *
- * The most straightforward technique turns out to be the fastest for
- * most input files: try all possible matches and select the longest.
- * The key feature of this algorithm is that insertions into the string
- * dictionary are very simple and thus fast, and deletions are avoided
- * completely. Insertions are performed at each input character, whereas
- * string matches are performed only when the previous match ends. So it
- * is preferable to spend more time in matches to allow very fast string
- * insertions and avoid deletions. The matching algorithm for small
- * strings is inspired from that of Rabin & Karp. A brute force approach
- * is used to find longer strings when a small match has been found.
- * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- * (by Leonid Broukhis).
- * A previous version of this file used a more sophisticated algorithm
- * (by Fiala and Greene) which is guaranteed to run in linear amortized
- * time, but has a larger average cost, uses more memory and is patented.
- * However the F&G algorithm may be faster for some highly redundant
- * files if the parameter max_chain_length (described below) is too large.
- *
- * ACKNOWLEDGEMENTS
- *
- * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- * I found it in 'freeze' written by Leonid Broukhis.
- * Thanks to many people for bug reports and testing.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- * Available in ftp://ds.internic.net/rfc/rfc1951.txt
- *
- * A description of the Rabin and Karp algorithm is given in the book
- * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- * Fiala,E.R., and Greene,D.H.
- * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* From: deflate.c,v 1.15 1996/07/24 13:40:58 me Exp $ */
-
-/* #include "deflate.h" */
-
-char deflate_copyright[] = " deflate 1.0.4 Copyright 1995-1996 Jean-loup Gailly ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- * Function prototypes.
- */
-typedef enum {
- need_more, /* block not completed, need more input or more output */
- block_done, /* block flush performed */
- finish_started, /* finish started, need only more output at next deflate */
- finish_done /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast OF((deflate_state *s, int flush));
-local block_state deflate_slow OF((deflate_state *s, int flush));
-local void lm_init OF((deflate_state *s));
-local void putShortMSB OF((deflate_state *s, uInt b));
-local void flush_pending OF((z_streamp strm));
-local int read_buf OF((z_streamp strm, charf *buf, unsigned size));
-#ifdef ASMV
- void match_init OF((void)); /* asm code initialization */
- uInt longest_match OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match OF((deflate_state *s, IPos cur_match));
-#endif
-
-#ifdef DEBUG_ZLIB
-local void check_match OF((deflate_state *s, IPos start, IPos match,
- int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-# define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
- ush good_length; /* reduce lazy search above this match length */
- ush max_lazy; /* do not perform lazy search above this match length */
- ush nice_length; /* quit search above this match length */
- ush max_chain;
- compress_func func;
-} config;
-
-local config configuration_table[10] = {
-/* good lazy nice chain */
-/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */
-/* 1 */ {4, 4, 8, 4, deflate_fast}, /* maximum speed, no lazy matches */
-/* 2 */ {4, 5, 16, 8, deflate_fast},
-/* 3 */ {4, 6, 32, 32, deflate_fast},
-
-/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */
-/* 5 */ {8, 16, 32, 32, deflate_slow},
-/* 6 */ {8, 16, 128, 128, deflate_slow},
-/* 7 */ {8, 32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN assertion: all calls to to UPDATE_HASH are made with consecutive
- * input characters, so that a running hash key can be computed from the
- * previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * IN assertion: all calls to to INSERT_STRING are made with consecutive
- * input characters and the first MIN_MATCH bytes of str are valid
- * (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#define INSERT_STRING(s, str, match_head) \
- (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
- s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
- s->head[s->ins_h] = (Pos)(str))
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
- s->head[s->hash_size-1] = NIL; \
- zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int deflateInit_(strm, level, version, stream_size)
- z_streamp strm;
- int level;
- const char *version;
- int stream_size;
-{
- return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
- Z_DEFAULT_STRATEGY, version, stream_size);
- /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
- version, stream_size)
- z_streamp strm;
- int level;
- int method;
- int windowBits;
- int memLevel;
- int strategy;
- const char *version;
- int stream_size;
-{
- deflate_state *s;
- int noheader = 0;
- static char* my_version = ZLIB_VERSION;
-
- ushf *overlay;
- /* We overlay pending_buf and d_buf+l_buf. This works since the average
- * output size for (length,distance) codes is <= 24 bits.
- */
-
- if (version == Z_NULL || version[0] != my_version[0] ||
- stream_size != sizeof(z_stream)) {
- return Z_VERSION_ERROR;
- }
- if (strm == Z_NULL) return Z_STREAM_ERROR;
-
- strm->msg = Z_NULL;
-#ifndef NO_ZCFUNCS
- if (strm->zalloc == Z_NULL) {
- strm->zalloc = zcalloc;
- strm->opaque = (voidpf)0;
- }
- if (strm->zfree == Z_NULL) strm->zfree = zcfree;
-#endif
-
- if (level == Z_DEFAULT_COMPRESSION) level = 6;
-
- if (windowBits < 0) { /* undocumented feature: suppress zlib header */
- noheader = 1;
- windowBits = -windowBits;
- }
- if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
- windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
- strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
- return Z_STREAM_ERROR;
- }
- s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
- if (s == Z_NULL) return Z_MEM_ERROR;
- strm->state = (struct internal_state FAR *)s;
- s->strm = strm;
-
- s->noheader = noheader;
- s->w_bits = windowBits;
- s->w_size = 1 << s->w_bits;
- s->w_mask = s->w_size - 1;
-
- s->hash_bits = memLevel + 7;
- s->hash_size = 1 << s->hash_bits;
- s->hash_mask = s->hash_size - 1;
- s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
- s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
- s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
- s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
-
- s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
- overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
- s->pending_buf = (uchf *) overlay;
- s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
- if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
- s->pending_buf == Z_NULL) {
- strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
- deflateEnd (strm);
- return Z_MEM_ERROR;
- }
- s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
- s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
- s->level = level;
- s->strategy = strategy;
- s->method = (Byte)method;
-
- return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int deflateSetDictionary (strm, dictionary, dictLength)
- z_streamp strm;
- const Bytef *dictionary;
- uInt dictLength;
-{
- deflate_state *s;
- uInt length = dictLength;
- uInt n;
- IPos hash_head = 0;
-
- if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
- return Z_STREAM_ERROR;
-
- s = (deflate_state *) strm->state;
- if (s->status != INIT_STATE) return Z_STREAM_ERROR;
-
- strm->adler = adler32(strm->adler, dictionary, dictLength);
-
- if (length < MIN_MATCH) return Z_OK;
- if (length > MAX_DIST(s)) {
- length = MAX_DIST(s);
-#ifndef USE_DICT_HEAD
- dictionary += dictLength - length; /* use the tail of the dictionary */
-#endif
- }
- zmemcpy((charf *)s->window, dictionary, length);
- s->strstart = length;
- s->block_start = (long)length;
-
- /* Insert all strings in the hash table (except for the last two bytes).
- * s->lookahead stays null, so s->ins_h will be recomputed at the next
- * call of fill_window.
- */
- s->ins_h = s->window[0];
- UPDATE_HASH(s, s->ins_h, s->window[1]);
- for (n = 0; n <= length - MIN_MATCH; n++) {
- INSERT_STRING(s, n, hash_head);
- }
- if (hash_head) hash_head = 0; /* to make compiler happy */
- return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateReset (strm)
- z_streamp strm;
-{
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL ||
- strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
-
- strm->total_in = strm->total_out = 0;
- strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
- strm->data_type = Z_UNKNOWN;
-
- s = (deflate_state *)strm->state;
- s->pending = 0;
- s->pending_out = s->pending_buf;
-
- if (s->noheader < 0) {
- s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
- }
- s->status = s->noheader ? BUSY_STATE : INIT_STATE;
- strm->adler = 1;
- s->last_flush = Z_NO_FLUSH;
-
- _tr_init(s);
- lm_init(s);
-
- return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateParams(strm, level, strategy)
- z_streamp strm;
- int level;
- int strategy;
-{
- deflate_state *s;
- compress_func func;
- int err = Z_OK;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- s = (deflate_state *) strm->state;
-
- if (level == Z_DEFAULT_COMPRESSION) {
- level = 6;
- }
- if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
- return Z_STREAM_ERROR;
- }
- func = configuration_table[s->level].func;
-
- if (func != configuration_table[level].func && strm->total_in != 0) {
- /* Flush the last buffer: */
- err = deflate(strm, Z_PARTIAL_FLUSH);
- }
- if (s->level != level) {
- s->level = level;
- s->max_lazy_match = configuration_table[level].max_lazy;
- s->good_match = configuration_table[level].good_length;
- s->nice_match = configuration_table[level].nice_length;
- s->max_chain_length = configuration_table[level].max_chain;
- }
- s->strategy = strategy;
- return err;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
- deflate_state *s;
- uInt b;
-{
- put_byte(s, (Byte)(b >> 8));
- put_byte(s, (Byte)(b & 0xff));
-}
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
- z_streamp strm;
-{
- deflate_state *s = (deflate_state *) strm->state;
- unsigned len = s->pending;
-
- if (len > strm->avail_out) len = strm->avail_out;
- if (len == 0) return;
-
- if (strm->next_out != Z_NULL) {
- zmemcpy(strm->next_out, s->pending_out, len);
- strm->next_out += len;
- }
- s->pending_out += len;
- strm->total_out += len;
- strm->avail_out -= len;
- s->pending -= len;
- if (s->pending == 0) {
- s->pending_out = s->pending_buf;
- }
-}
-
-/* ========================================================================= */
-int deflate (strm, flush)
- z_streamp strm;
- int flush;
-{
- int old_flush; /* value of flush param for previous deflate call */
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL ||
- flush > Z_FINISH || flush < 0) {
- return Z_STREAM_ERROR;
- }
- s = (deflate_state *) strm->state;
-
- if ((strm->next_in == Z_NULL && strm->avail_in != 0) ||
- (s->status == FINISH_STATE && flush != Z_FINISH)) {
- ERR_RETURN(strm, Z_STREAM_ERROR);
- }
- if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
- s->strm = strm; /* just in case */
- old_flush = s->last_flush;
- s->last_flush = flush;
-
- /* Write the zlib header */
- if (s->status == INIT_STATE) {
-
- uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
- uInt level_flags = (s->level-1) >> 1;
-
- if (level_flags > 3) level_flags = 3;
- header |= (level_flags << 6);
- if (s->strstart != 0) header |= PRESET_DICT;
- header += 31 - (header % 31);
-
- s->status = BUSY_STATE;
- putShortMSB(s, header);
-
- /* Save the adler32 of the preset dictionary: */
- if (s->strstart != 0) {
- putShortMSB(s, (uInt)(strm->adler >> 16));
- putShortMSB(s, (uInt)(strm->adler & 0xffff));
- }
- strm->adler = 1L;
- }
-
- /* Flush as much pending output as possible */
- if (s->pending != 0) {
- flush_pending(strm);
- if (strm->avail_out == 0) {
- /* Since avail_out is 0, deflate will be called again with
- * more output space, but possibly with both pending and
- * avail_in equal to zero. There won't be anything to do,
- * but this is not an error situation so make sure we
- * return OK instead of BUF_ERROR at next call of deflate:
- */
- s->last_flush = -1;
- return Z_OK;
- }
-
- /* Make sure there is something to do and avoid duplicate consecutive
- * flushes. For repeated and useless calls with Z_FINISH, we keep
- * returning Z_STREAM_END instead of Z_BUFF_ERROR.
- */
- } else if (strm->avail_in == 0 && flush <= old_flush &&
- flush != Z_FINISH) {
- ERR_RETURN(strm, Z_BUF_ERROR);
- }
-
- /* User must not provide more input after the first FINISH: */
- if (s->status == FINISH_STATE && strm->avail_in != 0) {
- ERR_RETURN(strm, Z_BUF_ERROR);
- }
-
- /* Start a new block or continue the current one.
- */
- if (strm->avail_in != 0 || s->lookahead != 0 ||
- (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
- block_state bstate;
-
- bstate = (*(configuration_table[s->level].func))(s, flush);
-
- if (bstate == finish_started || bstate == finish_done) {
- s->status = FINISH_STATE;
- }
- if (bstate == need_more || bstate == finish_started) {
- if (strm->avail_out == 0) {
- s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
- }
- return Z_OK;
- /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
- * of deflate should use the same flush parameter to make sure
- * that the flush is complete. So we don't have to output an
- * empty block here, this will be done at next call. This also
- * ensures that for a very small output buffer, we emit at most
- * one empty block.
- */
- }
- if (bstate == block_done) {
- if (flush == Z_PARTIAL_FLUSH) {
- _tr_align(s);
- } else if (flush == Z_PACKET_FLUSH) {
- /* Output just the 3-bit `stored' block type value,
- but not a zero length. */
- _tr_stored_type_only(s);
- } else { /* FULL_FLUSH or SYNC_FLUSH */
- _tr_stored_block(s, (char*)0, 0L, 0);
- /* For a full flush, this empty block will be recognized
- * as a special marker by inflate_sync().
- */
- if (flush == Z_FULL_FLUSH) {
- CLEAR_HASH(s); /* forget history */
- }
- }
- flush_pending(strm);
- if (strm->avail_out == 0) {
- s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
- return Z_OK;
- }
- }
- }
- Assert(strm->avail_out > 0, "bug2");
-
- if (flush != Z_FINISH) return Z_OK;
- if (s->noheader) return Z_STREAM_END;
-
- /* Write the zlib trailer (adler32) */
- putShortMSB(s, (uInt)(strm->adler >> 16));
- putShortMSB(s, (uInt)(strm->adler & 0xffff));
- flush_pending(strm);
- /* If avail_out is zero, the application will call deflate again
- * to flush the rest.
- */
- s->noheader = -1; /* write the trailer only once! */
- return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int deflateEnd (strm)
- z_streamp strm;
-{
- int status;
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
- s = (deflate_state *) strm->state;
-
- status = s->status;
- if (status != INIT_STATE && status != BUSY_STATE &&
- status != FINISH_STATE) {
- return Z_STREAM_ERROR;
- }
-
- /* Deallocate in reverse order of allocations: */
- TRY_FREE(strm, s->pending_buf);
- TRY_FREE(strm, s->head);
- TRY_FREE(strm, s->prev);
- TRY_FREE(strm, s->window);
-
- ZFREE(strm, s);
- strm->state = Z_NULL;
-
- return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- */
-int deflateCopy (dest, source)
- z_streamp dest;
- z_streamp source;
-{
- deflate_state *ds;
- deflate_state *ss;
- ushf *overlay;
-
- if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL)
- return Z_STREAM_ERROR;
- ss = (deflate_state *) source->state;
-
- zmemcpy(dest, source, sizeof(*dest));
-
- ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
- if (ds == Z_NULL) return Z_MEM_ERROR;
- dest->state = (struct internal_state FAR *) ds;
- zmemcpy(ds, ss, sizeof(*ds));
- ds->strm = dest;
-
- ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
- ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos));
- ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos));
- overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
- ds->pending_buf = (uchf *) overlay;
-
- if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
- ds->pending_buf == Z_NULL) {
- deflateEnd (dest);
- return Z_MEM_ERROR;
- }
- /* ??? following zmemcpy doesn't work for 16-bit MSDOS */
- zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
- zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
- zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
- zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
- ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
- ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
- ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
- ds->l_desc.dyn_tree = ds->dyn_ltree;
- ds->d_desc.dyn_tree = ds->dyn_dtree;
- ds->bl_desc.dyn_tree = ds->bl_tree;
-
- return Z_OK;
-}
-
-/* ===========================================================================
- * Return the number of bytes of output which are immediately available
- * for output from the decompressor.
- */
-int deflateOutputPending (strm)
- z_streamp strm;
-{
- if (strm == Z_NULL || strm->state == Z_NULL) return 0;
-
- return ((deflate_state *)(strm->state))->pending;
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read. All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
- z_streamp strm;
- charf *buf;
- unsigned size;
-{
- unsigned len = strm->avail_in;
-
- if (len > size) len = size;
- if (len == 0) return 0;
-
- strm->avail_in -= len;
-
- if (!((deflate_state *)(strm->state))->noheader) {
- strm->adler = adler32(strm->adler, strm->next_in, len);
- }
- zmemcpy(buf, strm->next_in, len);
- strm->next_in += len;
- strm->total_in += len;
-
- return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
- deflate_state *s;
-{
- s->window_size = (ulg)2L*s->w_size;
-
- CLEAR_HASH(s);
-
- /* Set the default configuration parameters:
- */
- s->max_lazy_match = configuration_table[s->level].max_lazy;
- s->good_match = configuration_table[s->level].good_length;
- s->nice_match = configuration_table[s->level].nice_length;
- s->max_chain_length = configuration_table[s->level].max_chain;
-
- s->strstart = 0;
- s->block_start = 0L;
- s->lookahead = 0;
- s->match_length = s->prev_length = MIN_MATCH-1;
- s->match_available = 0;
- s->ins_h = 0;
-#ifdef ASMV
- match_init(); /* initialize the asm code */
-#endif
-}
-
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
- deflate_state *s;
- IPos cur_match; /* current match */
-{
- unsigned chain_length = s->max_chain_length;/* max hash chain length */
- register Bytef *scan = s->window + s->strstart; /* current string */
- register Bytef *match; /* matched string */
- register int len; /* length of current match */
- int best_len = s->prev_length; /* best match length so far */
- int nice_match = s->nice_match; /* stop if match long enough */
- IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
- s->strstart - (IPos)MAX_DIST(s) : NIL;
- /* Stop when cur_match becomes <= limit. To simplify the code,
- * we prevent matches with the string of window index 0.
- */
- Posf *prev = s->prev;
- uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
- /* Compare two bytes at a time. Note: this is not always beneficial.
- * Try with and without -DUNALIGNED_OK to check.
- */
- register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
- register ush scan_start = *(ushf*)scan;
- register ush scan_end = *(ushf*)(scan+best_len-1);
-#else
- register Bytef *strend = s->window + s->strstart + MAX_MATCH;
- register Byte scan_end1 = scan[best_len-1];
- register Byte scan_end = scan[best_len];
-#endif
-
- /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
- * It is easy to get rid of this optimization if necessary.
- */
- Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
- /* Do not waste too much time if we already have a good match: */
- if (s->prev_length >= s->good_match) {
- chain_length >>= 2;
- }
- /* Do not look for matches beyond the end of the input. This is necessary
- * to make deflate deterministic.
- */
- if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
- Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
- do {
- Assert(cur_match < s->strstart, "no future");
- match = s->window + cur_match;
-
- /* Skip to next match if the match length cannot increase
- * or if the match length is less than 2:
- */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
- /* This code assumes sizeof(unsigned short) == 2. Do not use
- * UNALIGNED_OK if your compiler uses a different size.
- */
- if (*(ushf*)(match+best_len-1) != scan_end ||
- *(ushf*)match != scan_start) continue;
-
- /* It is not necessary to compare scan[2] and match[2] since they are
- * always equal when the other bytes match, given that the hash keys
- * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
- * strstart+3, +5, ... up to strstart+257. We check for insufficient
- * lookahead only every 4th comparison; the 128th check will be made
- * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
- * necessary to put more guard bytes at the end of the window, or
- * to check more often for insufficient lookahead.
- */
- Assert(scan[2] == match[2], "scan[2]?");
- scan++, match++;
- do {
- } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- scan < strend);
- /* The funny "do {}" generates better code on most compilers */
-
- /* Here, scan <= window+strstart+257 */
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
- if (*scan == *match) scan++;
-
- len = (MAX_MATCH - 1) - (int)(strend-scan);
- scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
- if (match[best_len] != scan_end ||
- match[best_len-1] != scan_end1 ||
- *match != *scan ||
- *++match != scan[1]) continue;
-
- /* The check at best_len-1 can be removed because it will be made
- * again later. (This heuristic is not always a win.)
- * It is not necessary to compare scan[2] and match[2] since they
- * are always equal when the other bytes match, given that
- * the hash keys are equal and that HASH_BITS >= 8.
- */
- scan += 2, match++;
- Assert(*scan == *match, "match[2]?");
-
- /* We check for insufficient lookahead only every 8th comparison;
- * the 256th check will be made at strstart+258.
- */
- do {
- } while (*++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- scan < strend);
-
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
- len = MAX_MATCH - (int)(strend - scan);
- scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
- if (len > best_len) {
- s->match_start = cur_match;
- best_len = len;
- if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
- scan_end = *(ushf*)(scan+best_len-1);
-#else
- scan_end1 = scan[best_len-1];
- scan_end = scan[best_len];
-#endif
- }
- } while ((cur_match = prev[cur_match & wmask]) > limit
- && --chain_length != 0);
-
- if ((uInt)best_len <= s->lookahead) return best_len;
- return s->lookahead;
-}
-#endif /* ASMV */
-
-#ifdef DEBUG_ZLIB
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
- deflate_state *s;
- IPos start, match;
- int length;
-{
- /* check that the match is indeed a match */
- if (zmemcmp((charf *)s->window + match,
- (charf *)s->window + start, length) != EQUAL) {
- fprintf(stderr, " start %u, match %u, length %d\n",
- start, match, length);
- do {
- fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
- } while (--length != 0);
- z_error("invalid match");
- }
- if (z_verbose > 1) {
- fprintf(stderr,"\\[%d,%d]", start-match, length);
- do { putc(s->window[start++], stderr); } while (--length != 0);
- }
-}
-#else
-# define check_match(s, start, match, length)
-#endif
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- * At least one byte has been read, or avail_in == 0; reads are
- * performed for at least two bytes (required for the zip translate_eol
- * option -- not supported here).
- */
-local void fill_window(s)
- deflate_state *s;
-{
- register unsigned n, m;
- register Posf *p;
- unsigned more; /* Amount of free space at the end of the window. */
- uInt wsize = s->w_size;
-
- do {
- more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
- /* Deal with !@#$% 64K limit: */
- if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
- more = wsize;
-
- } else if (more == (unsigned)(-1)) {
- /* Very unlikely, but possible on 16 bit machine if strstart == 0
- * and lookahead == 1 (input done one byte at time)
- */
- more--;
-
- /* If the window is almost full and there is insufficient lookahead,
- * move the upper half to the lower one to make room in the upper half.
- */
- } else if (s->strstart >= wsize+MAX_DIST(s)) {
-
- zmemcpy((charf *)s->window, (charf *)s->window+wsize,
- (unsigned)wsize);
- s->match_start -= wsize;
- s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
- s->block_start -= (long) wsize;
-
- /* Slide the hash table (could be avoided with 32 bit values
- at the expense of memory usage). We slide even when level == 0
- to keep the hash table consistent if we switch back to level > 0
- later. (Using level 0 permanently is not an optimal usage of
- zlib, so we don't care about this pathological case.)
- */
- n = s->hash_size;
- p = &s->head[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- } while (--n);
-
- n = wsize;
- p = &s->prev[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- /* If n is not on any hash chain, prev[n] is garbage but
- * its value will never be used.
- */
- } while (--n);
- more += wsize;
- }
- if (s->strm->avail_in == 0) return;
-
- /* If there was no sliding:
- * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
- * more == window_size - lookahead - strstart
- * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
- * => more >= window_size - 2*WSIZE + 2
- * In the BIG_MEM or MMAP case (not yet supported),
- * window_size == input_size + MIN_LOOKAHEAD &&
- * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
- * Otherwise, window_size == 2*WSIZE so more >= 2.
- * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
- */
- Assert(more >= 2, "more < 2");
-
- n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
- more);
- s->lookahead += n;
-
- /* Initialize the hash value now that we have some input: */
- if (s->lookahead >= MIN_MATCH) {
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- }
- /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
- * but this is not important since only literal bytes will be emitted.
- */
-
- } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, eof) { \
- _tr_flush_block(s, (s->block_start >= 0L ? \
- (charf *)&s->window[(unsigned)s->block_start] : \
- (charf *)Z_NULL), \
- (ulg)((long)s->strstart - s->block_start), \
- (eof)); \
- s->block_start = s->strstart; \
- flush_pending(s->strm); \
- Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, eof) { \
- FLUSH_BLOCK_ONLY(s, eof); \
- if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
- */
-local block_state deflate_stored(s, flush)
- deflate_state *s;
- int flush;
-{
- /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
- * to pending_buf_size, and each stored block has a 5 byte header:
- */
- ulg max_block_size = 0xffff;
- ulg max_start;
-
- if (max_block_size > s->pending_buf_size - 5) {
- max_block_size = s->pending_buf_size - 5;
- }
-
- /* Copy as much as possible from input to output: */
- for (;;) {
- /* Fill the window as much as possible: */
- if (s->lookahead <= 1) {
-
- Assert(s->strstart < s->w_size+MAX_DIST(s) ||
- s->block_start >= (long)s->w_size, "slide too late");
-
- fill_window(s);
- if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
- if (s->lookahead == 0) break; /* flush the current block */
- }
- Assert(s->block_start >= 0L, "block gone");
-
- s->strstart += s->lookahead;
- s->lookahead = 0;
-
- /* Emit a stored block if pending_buf will be full: */
- max_start = s->block_start + max_block_size;
- if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
- /* strstart == 0 is possible when wraparound on 16-bit machine */
- s->lookahead = (uInt)(s->strstart - max_start);
- s->strstart = (uInt)max_start;
- FLUSH_BLOCK(s, 0);
- }
- /* Flush if we may have to slide, otherwise block_start may become
- * negative and the data will be gone:
- */
- if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
- FLUSH_BLOCK(s, 0);
- }
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of the hash chain */
- int bflush; /* set if current block must be flushed */
-
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
- return need_more;
- }
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- * At this point we have always match_length < MIN_MATCH
- */
- if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
- if (s->strategy != Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- }
- /* longest_match() sets match_start */
- }
- if (s->match_length >= MIN_MATCH) {
- check_match(s, s->strstart, s->match_start, s->match_length);
-
- bflush = _tr_tally(s, s->strstart - s->match_start,
- s->match_length - MIN_MATCH);
-
- s->lookahead -= s->match_length;
-
- /* Insert new strings in the hash table only if the match length
- * is not too large. This saves time but degrades compression.
- */
- if (s->match_length <= s->max_insert_length &&
- s->lookahead >= MIN_MATCH) {
- s->match_length--; /* string at strstart already in hash table */
- do {
- s->strstart++;
- INSERT_STRING(s, s->strstart, hash_head);
- /* strstart never exceeds WSIZE-MAX_MATCH, so there are
- * always MIN_MATCH bytes ahead.
- */
- } while (--s->match_length != 0);
- s->strstart++;
- } else {
- s->strstart += s->match_length;
- s->match_length = 0;
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
- * matter since it will be recomputed at next deflate call.
- */
- }
- } else {
- /* No match, output a literal byte */
- Tracevv((stderr,"%c", s->window[s->strstart]));
- bflush = _tr_tally (s, 0, s->window[s->strstart]);
- s->lookahead--;
- s->strstart++;
- }
- if (bflush) FLUSH_BLOCK(s, 0);
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of hash chain */
- int bflush; /* set if current block must be flushed */
-
- /* Process the input block. */
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
- return need_more;
- }
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- */
- s->prev_length = s->match_length, s->prev_match = s->match_start;
- s->match_length = MIN_MATCH-1;
-
- if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
- s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
- if (s->strategy != Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- }
- /* longest_match() sets match_start */
-
- if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
- (s->match_length == MIN_MATCH &&
- s->strstart - s->match_start > TOO_FAR))) {
-
- /* If prev_match is also MIN_MATCH, match_start is garbage
- * but we will ignore the current match anyway.
- */
- s->match_length = MIN_MATCH-1;
- }
- }
- /* If there was a match at the previous step and the current
- * match is not better, output the previous match:
- */
- if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
- uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
- /* Do not insert strings in hash table beyond this. */
-
- check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
- bflush = _tr_tally(s, s->strstart -1 - s->prev_match,
- s->prev_length - MIN_MATCH);
-
- /* Insert in hash table all strings up to the end of the match.
- * strstart-1 and strstart are already inserted. If there is not
- * enough lookahead, the last two strings are not inserted in
- * the hash table.
- */
- s->lookahead -= s->prev_length-1;
- s->prev_length -= 2;
- do {
- if (++s->strstart <= max_insert) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
- } while (--s->prev_length != 0);
- s->match_available = 0;
- s->match_length = MIN_MATCH-1;
- s->strstart++;
-
- if (bflush) FLUSH_BLOCK(s, 0);
-
- } else if (s->match_available) {
- /* If there was no match at the previous position, output a
- * single literal. If there was a match but the current match
- * is longer, truncate the previous match to a single literal.
- */
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- if (_tr_tally (s, 0, s->window[s->strstart-1])) {
- FLUSH_BLOCK_ONLY(s, 0);
- }
- s->strstart++;
- s->lookahead--;
- if (s->strm->avail_out == 0) return need_more;
- } else {
- /* There is no previous match to compare with, wait for
- * the next step to decide.
- */
- s->match_available = 1;
- s->strstart++;
- s->lookahead--;
- }
- }
- Assert (flush != Z_NO_FLUSH, "no flush?");
- if (s->match_available) {
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- _tr_tally (s, 0, s->window[s->strstart-1]);
- s->match_available = 0;
- }
- FLUSH_BLOCK(s, flush == Z_FINISH);
- return flush == Z_FINISH ? finish_done : block_done;
-}
-/* --- deflate.c */
-
-/* +++ trees.c */
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * ALGORITHM
- *
- * The "deflation" process uses several Huffman trees. The more
- * common source values are represented by shorter bit sequences.
- *
- * Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values). The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- * Storer, James A.
- * Data Compression: Methods and Theory, pp. 49-50.
- * Computer Science Press, 1988. ISBN 0-7167-8156-5.
- *
- * Sedgewick, R.
- * Algorithms, p290.
- * Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* From: trees.c,v 1.11 1996/07/24 13:41:06 me Exp $ */
-
-/* #include "deflate.h" */
-
-#ifdef DEBUG_ZLIB
-# include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6 16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10 17
-/* repeat a zero length 3-10 times (3 bits of repeat count) */
-
-#define REPZ_11_138 18
-/* repeat a zero length 11-138 times (7 bits of repeat count) */
-
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
- = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
- = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
- = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local uch bl_order[BL_CODES]
- = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-local uch dist_code[512];
-/* distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-struct static_tree_desc_s {
- ct_data *static_tree; /* static tree or NULL */
- intf *extra_bits; /* extra bits for each code or NULL */
- int extra_base; /* base index for extra_bits */
- int elems; /* max number of elements in the tree */
- int max_length; /* max bit length for the codes */
-};
-
-local static_tree_desc static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc static_d_desc =
-{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS};
-
-local static_tree_desc static_bl_desc =
-{(ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block OF((deflate_state *s));
-local void pqdownheap OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen OF((deflate_state *s, tree_desc *desc));
-local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree OF((deflate_state *s, tree_desc *desc));
-local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local int build_bl_tree OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
- int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
- ct_data *dtree));
-local void set_data_type OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup OF((deflate_state *s));
-local void bi_flush OF((deflate_state *s));
-local void copy_block OF((deflate_state *s, charf *buf, unsigned len,
- int header));
-
-#ifndef DEBUG_ZLIB
-# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
- /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG_ZLIB */
-# define send_code(s, c, tree) \
- { if (verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
- send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-#define d_code(dist) \
- ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
- put_byte(s, (uch)((w) & 0xff)); \
- put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG_ZLIB
-local void send_bits OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
- deflate_state *s;
- int value; /* value to send */
- int length; /* number of bits */
-{
- Tracevv((stderr," l %2d v %4x ", length, value));
- Assert(length > 0 && length <= 15, "invalid length");
- s->bits_sent += (ulg)length;
-
- /* If not enough room in bi_buf, use (valid) bits from bi_buf and
- * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
- * unused bits in value.
- */
- if (s->bi_valid > (int)Buf_size - length) {
- s->bi_buf |= (value << s->bi_valid);
- put_short(s, s->bi_buf);
- s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
- s->bi_valid += length - Buf_size;
- } else {
- s->bi_buf |= value << s->bi_valid;
- s->bi_valid += length;
- }
-}
-#else /* !DEBUG_ZLIB */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
- if (s->bi_valid > (int)Buf_size - len) {\
- int val = value;\
- s->bi_buf |= (val << s->bi_valid);\
- put_short(s, s->bi_buf);\
- s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
- s->bi_valid += len - Buf_size;\
- } else {\
- s->bi_buf |= (value) << s->bi_valid;\
- s->bi_valid += len;\
- }\
-}
-#endif /* DEBUG_ZLIB */
-
-
-#define MAX(a,b) (a >= b ? a : b)
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables. In a multi-threaded environment,
- * this function may be called by two threads concurrently, but this is
- * harmless since both invocations do exactly the same thing.
- */
-local void tr_static_init()
-{
- static int static_init_done = 0;
- int n; /* iterates over tree elements */
- int bits; /* bit counter */
- int length; /* length value */
- int code; /* code value */
- int dist; /* distance index */
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- if (static_init_done) return;
-
- /* Initialize the mapping length (0..255) -> length code (0..28) */
- length = 0;
- for (code = 0; code < LENGTH_CODES-1; code++) {
- base_length[code] = length;
- for (n = 0; n < (1<<extra_lbits[code]); n++) {
- length_code[length++] = (uch)code;
- }
- }
- Assert (length == 256, "tr_static_init: length != 256");
- /* Note that the length 255 (match length 258) can be represented
- * in two different ways: code 284 + 5 bits or code 285, so we
- * overwrite length_code[255] to use the best encoding:
- */
- length_code[length-1] = (uch)code;
-
- /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
- dist = 0;
- for (code = 0 ; code < 16; code++) {
- base_dist[code] = dist;
- for (n = 0; n < (1<<extra_dbits[code]); n++) {
- dist_code[dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "tr_static_init: dist != 256");
- dist >>= 7; /* from now on, all distances are divided by 128 */
- for ( ; code < D_CODES; code++) {
- base_dist[code] = dist << 7;
- for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
- dist_code[256 + dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
- /* Construct the codes of the static literal tree */
- for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
- n = 0;
- while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
- while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
- while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
- while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
- /* Codes 286 and 287 do not exist, but we must include them in the
- * tree construction to get a canonical Huffman tree (longest code
- * all ones)
- */
- gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
- /* The static distance tree is trivial: */
- for (n = 0; n < D_CODES; n++) {
- static_dtree[n].Len = 5;
- static_dtree[n].Code = bi_reverse((unsigned)n, 5);
- }
- static_init_done = 1;
-}
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void _tr_init(s)
- deflate_state *s;
-{
- tr_static_init();
-
- s->compressed_len = 0L;
-
- s->l_desc.dyn_tree = s->dyn_ltree;
- s->l_desc.stat_desc = &static_l_desc;
-
- s->d_desc.dyn_tree = s->dyn_dtree;
- s->d_desc.stat_desc = &static_d_desc;
-
- s->bl_desc.dyn_tree = s->bl_tree;
- s->bl_desc.stat_desc = &static_bl_desc;
-
- s->bi_buf = 0;
- s->bi_valid = 0;
- s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG_ZLIB
- s->bits_sent = 0L;
-#endif
-
- /* Initialize the first block of the first file: */
- init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
- deflate_state *s;
-{
- int n; /* iterates over tree elements */
-
- /* Initialize the trees. */
- for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0;
- for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0;
- for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
- s->dyn_ltree[END_BLOCK].Freq = 1;
- s->opt_len = s->static_len = 0L;
- s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
- top = s->heap[SMALLEST]; \
- s->heap[SMALLEST] = s->heap[s->heap_len--]; \
- pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
- (tree[n].Freq < tree[m].Freq || \
- (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
- deflate_state *s;
- ct_data *tree; /* the tree to restore */
- int k; /* node to move down */
-{
- int v = s->heap[k];
- int j = k << 1; /* left son of k */
- while (j <= s->heap_len) {
- /* Set j to the smallest of the two sons: */
- if (j < s->heap_len &&
- smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
- j++;
- }
- /* Exit if v is smaller than both sons */
- if (smaller(tree, v, s->heap[j], s->depth)) break;
-
- /* Exchange v with the smallest son */
- s->heap[k] = s->heap[j]; k = j;
-
- /* And continue down the tree, setting j to the left son of k */
- j <<= 1;
- }
- s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- * above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- * array bl_count contains the frequencies for each bit length.
- * The length opt_len is updated; static_len is also updated if stree is
- * not null.
- */
-local void gen_bitlen(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- int max_code = desc->max_code;
- ct_data *stree = desc->stat_desc->static_tree;
- intf *extra = desc->stat_desc->extra_bits;
- int base = desc->stat_desc->extra_base;
- int max_length = desc->stat_desc->max_length;
- int h; /* heap index */
- int n, m; /* iterate over the tree elements */
- int bits; /* bit length */
- int xbits; /* extra bits */
- ush f; /* frequency */
- int overflow = 0; /* number of elements with bit length too large */
-
- for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
- /* In a first pass, compute the optimal bit lengths (which may
- * overflow in the case of the bit length tree).
- */
- tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
- for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
- n = s->heap[h];
- bits = tree[tree[n].Dad].Len + 1;
- if (bits > max_length) bits = max_length, overflow++;
- tree[n].Len = (ush)bits;
- /* We overwrite tree[n].Dad which is no longer needed */
-
- if (n > max_code) continue; /* not a leaf node */
-
- s->bl_count[bits]++;
- xbits = 0;
- if (n >= base) xbits = extra[n-base];
- f = tree[n].Freq;
- s->opt_len += (ulg)f * (bits + xbits);
- if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
- }
- if (overflow == 0) return;
-
- Trace((stderr,"\nbit length overflow\n"));
- /* This happens for example on obj2 and pic of the Calgary corpus */
-
- /* Find the first bit length which could increase: */
- do {
- bits = max_length-1;
- while (s->bl_count[bits] == 0) bits--;
- s->bl_count[bits]--; /* move one leaf down the tree */
- s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
- s->bl_count[max_length]--;
- /* The brother of the overflow item also moves one step up,
- * but this does not affect bl_count[max_length]
- */
- overflow -= 2;
- } while (overflow > 0);
-
- /* Now recompute all bit lengths, scanning in increasing frequency.
- * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
- * lengths instead of fixing only the wrong ones. This idea is taken
- * from 'ar' written by Haruhiko Okumura.)
- */
- for (bits = max_length; bits != 0; bits--) {
- n = s->bl_count[bits];
- while (n != 0) {
- m = s->heap[--h];
- if (m > max_code) continue;
- if (tree[m].Len != (unsigned) bits) {
- Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
- s->opt_len += ((long)bits - (long)tree[m].Len)
- *(long)tree[m].Freq;
- tree[m].Len = (ush)bits;
- }
- n--;
- }
- }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- * zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
- ct_data *tree; /* the tree to decorate */
- int max_code; /* largest code with non zero frequency */
- ushf *bl_count; /* number of codes at each bit length */
-{
- ush next_code[MAX_BITS+1]; /* next code value for each bit length */
- ush code = 0; /* running code value */
- int bits; /* bit index */
- int n; /* code index */
-
- /* The distribution counts are first used to generate the code values
- * without bit reversal.
- */
- for (bits = 1; bits <= MAX_BITS; bits++) {
- next_code[bits] = code = (code + bl_count[bits-1]) << 1;
- }
- /* Check that the bit counts in bl_count are consistent. The last code
- * must be all ones.
- */
- Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
- "inconsistent bit counts");
- Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
- for (n = 0; n <= max_code; n++) {
- int len = tree[n].Len;
- if (len == 0) continue;
- /* Now reverse the bits */
- tree[n].Code = bi_reverse(next_code[len]++, len);
-
- Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
- n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
- }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- * and corresponding code. The length opt_len is updated; static_len is
- * also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- ct_data *stree = desc->stat_desc->static_tree;
- int elems = desc->stat_desc->elems;
- int n, m; /* iterate over heap elements */
- int max_code = -1; /* largest code with non zero frequency */
- int node; /* new node being created */
-
- /* Construct the initial heap, with least frequent element in
- * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
- * heap[0] is not used.
- */
- s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
- for (n = 0; n < elems; n++) {
- if (tree[n].Freq != 0) {
- s->heap[++(s->heap_len)] = max_code = n;
- s->depth[n] = 0;
- } else {
- tree[n].Len = 0;
- }
- }
-
- /* The pkzip format requires that at least one distance code exists,
- * and that at least one bit should be sent even if there is only one
- * possible code. So to avoid special checks later on we force at least
- * two codes of non zero frequency.
- */
- while (s->heap_len < 2) {
- node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
- tree[node].Freq = 1;
- s->depth[node] = 0;
- s->opt_len--; if (stree) s->static_len -= stree[node].Len;
- /* node is 0 or 1 so it does not have extra bits */
- }
- desc->max_code = max_code;
-
- /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
- * establish sub-heaps of increasing lengths:
- */
- for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
- /* Construct the Huffman tree by repeatedly combining the least two
- * frequent nodes.
- */
- node = elems; /* next internal node of the tree */
- do {
- pqremove(s, tree, n); /* n = node of least frequency */
- m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
- s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
- s->heap[--(s->heap_max)] = m;
-
- /* Create a new node father of n and m */
- tree[node].Freq = tree[n].Freq + tree[m].Freq;
- s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
- tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
- if (tree == s->bl_tree) {
- fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
- node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
- }
-#endif
- /* and insert the new node in the heap */
- s->heap[SMALLEST] = node++;
- pqdownheap(s, tree, SMALLEST);
-
- } while (s->heap_len >= 2);
-
- s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
- /* At this point, the fields freq and dad are set. We can now
- * generate the bit lengths.
- */
- gen_bitlen(s, (tree_desc *)desc);
-
- /* The field len is now set, we can generate the bit codes */
- gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- if (nextlen == 0) max_count = 138, min_count = 3;
- tree[max_code+1].Len = (ush)0xffff; /* guard */
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- s->bl_tree[curlen].Freq += count;
- } else if (curlen != 0) {
- if (curlen != prevlen) s->bl_tree[curlen].Freq++;
- s->bl_tree[REP_3_6].Freq++;
- } else if (count <= 10) {
- s->bl_tree[REPZ_3_10].Freq++;
- } else {
- s->bl_tree[REPZ_11_138].Freq++;
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- /* tree[max_code+1].Len = -1; */ /* guard already set */
- if (nextlen == 0) max_count = 138, min_count = 3;
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
- } else if (curlen != 0) {
- if (curlen != prevlen) {
- send_code(s, curlen, s->bl_tree); count--;
- }
- Assert(count >= 3 && count <= 6, " 3_6?");
- send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
- } else if (count <= 10) {
- send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
- } else {
- send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
- deflate_state *s;
-{
- int max_blindex; /* index of last bit length code of non zero freq */
-
- /* Determine the bit length frequencies for literal and distance trees */
- scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
- scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
- /* Build the bit length tree: */
- build_tree(s, (tree_desc *)(&(s->bl_desc)));
- /* opt_len now includes the length of the tree representations, except
- * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
- */
-
- /* Determine the number of bit length codes to send. The pkzip format
- * requires that at least 4 bit length codes be sent. (appnote.txt says
- * 3 but the actual value used is 4.)
- */
- for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
- if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
- }
- /* Update opt_len to include the bit length tree and counts */
- s->opt_len += 3*(max_blindex+1) + 5+5+4;
- Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
- s->opt_len, s->static_len));
-
- return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
- deflate_state *s;
- int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
- int rank; /* index in bl_order */
-
- Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
- Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
- "too many codes");
- Tracev((stderr, "\nbl counts: "));
- send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
- send_bits(s, dcodes-1, 5);
- send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */
- for (rank = 0; rank < blcodes; rank++) {
- Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
- send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
- }
- Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
- Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
- Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void _tr_stored_block(s, buf, stored_len, eof)
- deflate_state *s;
- charf *buf; /* input block */
- ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
-{
- send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */
- s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
- s->compressed_len += (stored_len + 4) << 3;
-
- copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* Send just the `stored block' type code without any length bytes or data.
- */
-void _tr_stored_type_only(s)
- deflate_state *s;
-{
- send_bits(s, (STORED_BLOCK << 1), 3);
- bi_windup(s);
- s->compressed_len = (s->compressed_len + 3) & ~7L;
-}
-
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
- */
-void _tr_align(s)
- deflate_state *s;
-{
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
- s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
- bi_flush(s);
- /* Of the 10 bits for the empty block, we have already sent
- * (10 - bi_valid) bits. The lookahead for the last real code (before
- * the EOB of the previous block) was thus at least one plus the length
- * of the EOB plus what we have just sent of the empty static block.
- */
- if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
- s->compressed_len += 10L;
- bi_flush(s);
- }
- s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
- * returns the total compressed length for the file so far.
- */
-ulg _tr_flush_block(s, buf, stored_len, eof)
- deflate_state *s;
- charf *buf; /* input block, or NULL if too old */
- ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
-{
- ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
- int max_blindex = 0; /* index of last bit length code of non zero freq */
-
- /* Build the Huffman trees unless a stored block is forced */
- if (s->level > 0) {
-
- /* Check if the file is ascii or binary */
- if (s->data_type == Z_UNKNOWN) set_data_type(s);
-
- /* Construct the literal and distance trees */
- build_tree(s, (tree_desc *)(&(s->l_desc)));
- Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
-
- build_tree(s, (tree_desc *)(&(s->d_desc)));
- Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
- /* At this point, opt_len and static_len are the total bit lengths of
- * the compressed block data, excluding the tree representations.
- */
-
- /* Build the bit length tree for the above two trees, and get the index
- * in bl_order of the last bit length code to send.
- */
- max_blindex = build_bl_tree(s);
-
- /* Determine the best encoding. Compute first the block length in bytes*/
- opt_lenb = (s->opt_len+3+7)>>3;
- static_lenb = (s->static_len+3+7)>>3;
-
- Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
- opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
- s->last_lit));
-
- if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
- } else {
- Assert(buf != (char*)0, "lost buf");
- opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
- }
-
- /* If compression failed and this is the first and last block,
- * and if the .zip file can be seeked (to rewrite the local header),
- * the whole file is transformed into a stored file:
- */
-#ifdef STORED_FILE_OK
-# ifdef FORCE_STORED_FILE
- if (eof && s->compressed_len == 0L) { /* force stored file */
-# else
- if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) {
-# endif
- /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
- if (buf == (charf*)0) error ("block vanished");
-
- copy_block(s, buf, (unsigned)stored_len, 0); /* without header */
- s->compressed_len = stored_len << 3;
- s->method = STORED;
- } else
-#endif /* STORED_FILE_OK */
-
-#ifdef FORCE_STORED
- if (buf != (char*)0) { /* force stored block */
-#else
- if (stored_len+4 <= opt_lenb && buf != (char*)0) {
- /* 4: two words for the lengths */
-#endif
- /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
- * Otherwise we can't have processed more than WSIZE input bytes since
- * the last block flush, because compression would have been
- * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
- * transform a block into a stored block.
- */
- _tr_stored_block(s, buf, stored_len, eof);
-
-#ifdef FORCE_STATIC
- } else if (static_lenb >= 0) { /* force static trees */
-#else
- } else if (static_lenb == opt_lenb) {
-#endif
- send_bits(s, (STATIC_TREES<<1)+eof, 3);
- compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
- s->compressed_len += 3 + s->static_len;
- } else {
- send_bits(s, (DYN_TREES<<1)+eof, 3);
- send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
- max_blindex+1);
- compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
- s->compressed_len += 3 + s->opt_len;
- }
- Assert (s->compressed_len == s->bits_sent, "bad compressed size");
- init_block(s);
-
- if (eof) {
- bi_windup(s);
- s->compressed_len += 7; /* align on byte boundary */
- }
- Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
- s->compressed_len-7*eof));
-
- return s->compressed_len >> 3;
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int _tr_tally (s, dist, lc)
- deflate_state *s;
- unsigned dist; /* distance of matched string */
- unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
- s->d_buf[s->last_lit] = (ush)dist;
- s->l_buf[s->last_lit++] = (uch)lc;
- if (dist == 0) {
- /* lc is the unmatched char */
- s->dyn_ltree[lc].Freq++;
- } else {
- s->matches++;
- /* Here, lc is the match length - MIN_MATCH */
- dist--; /* dist = match distance - 1 */
- Assert((ush)dist < (ush)MAX_DIST(s) &&
- (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
- (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match");
-
- s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
- s->dyn_dtree[d_code(dist)].Freq++;
- }
-
- /* Try to guess if it is profitable to stop the current block here */
- if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
- /* Compute an upper bound for the compressed length */
- ulg out_length = (ulg)s->last_lit*8L;
- ulg in_length = (ulg)((long)s->strstart - s->block_start);
- int dcode;
- for (dcode = 0; dcode < D_CODES; dcode++) {
- out_length += (ulg)s->dyn_dtree[dcode].Freq *
- (5L+extra_dbits[dcode]);
- }
- out_length >>= 3;
- Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
- s->last_lit, in_length, out_length,
- 100L - out_length*100L/in_length));
- if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
- }
- return (s->last_lit == s->lit_bufsize-1);
- /* We avoid equality with lit_bufsize because of wraparound at 64K
- * on 16 bit machines and because stored blocks are restricted to
- * 64K-1 bytes.
- */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
- deflate_state *s;
- ct_data *ltree; /* literal tree */
- ct_data *dtree; /* distance tree */
-{
- unsigned dist; /* distance of matched string */
- int lc; /* match length or unmatched char (if dist == 0) */
- unsigned lx = 0; /* running index in l_buf */
- unsigned code; /* the code to send */
- int extra; /* number of extra bits to send */
-
- if (s->last_lit != 0) do {
- dist = s->d_buf[lx];
- lc = s->l_buf[lx++];
- if (dist == 0) {
- send_code(s, lc, ltree); /* send a literal byte */
- Tracecv(isgraph(lc), (stderr," '%c' ", lc));
- } else {
- /* Here, lc is the match length - MIN_MATCH */
- code = length_code[lc];
- send_code(s, code+LITERALS+1, ltree); /* send the length code */
- extra = extra_lbits[code];
- if (extra != 0) {
- lc -= base_length[code];
- send_bits(s, lc, extra); /* send the extra length bits */
- }
- dist--; /* dist is now the match distance - 1 */
- code = d_code(dist);
- Assert (code < D_CODES, "bad d_code");
-
- send_code(s, code, dtree); /* send the distance code */
- extra = extra_dbits[code];
- if (extra != 0) {
- dist -= base_dist[code];
- send_bits(s, dist, extra); /* send the extra distance bits */
- }
- } /* literal or match pair ? */
-
- /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
- Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
-
- } while (lx < s->last_lit);
-
- send_code(s, END_BLOCK, ltree);
- s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
- */
-local void set_data_type(s)
- deflate_state *s;
-{
- int n = 0;
- unsigned ascii_freq = 0;
- unsigned bin_freq = 0;
- while (n < 7) bin_freq += s->dyn_ltree[n++].Freq;
- while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq;
- while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
- s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
- unsigned code; /* the value to invert */
- int len; /* its bit length */
-{
- register unsigned res = 0;
- do {
- res |= code & 1;
- code >>= 1, res <<= 1;
- } while (--len > 0);
- return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
- deflate_state *s;
-{
- if (s->bi_valid == 16) {
- put_short(s, s->bi_buf);
- s->bi_buf = 0;
- s->bi_valid = 0;
- } else if (s->bi_valid >= 8) {
- put_byte(s, (Byte)s->bi_buf);
- s->bi_buf >>= 8;
- s->bi_valid -= 8;
- }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
- deflate_state *s;
-{
- if (s->bi_valid > 8) {
- put_short(s, s->bi_buf);
- } else if (s->bi_valid > 0) {
- put_byte(s, (Byte)s->bi_buf);
- }
- s->bi_buf = 0;
- s->bi_valid = 0;
-#ifdef DEBUG_ZLIB
- s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
- deflate_state *s;
- charf *buf; /* the input data */
- unsigned len; /* its length */
- int header; /* true if block header must be written */
-{
- bi_windup(s); /* align on byte boundary */
- s->last_eob_len = 8; /* enough lookahead for inflate */
-
- if (header) {
- put_short(s, (ush)len);
- put_short(s, (ush)~len);
-#ifdef DEBUG_ZLIB
- s->bits_sent += 2*16;
-#endif
- }
-#ifdef DEBUG_ZLIB
- s->bits_sent += (ulg)len<<3;
-#endif
- /* bundle up the put_byte(s, *buf++) calls */
- zmemcpy(&s->pending_buf[s->pending], buf, len);
- s->pending += len;
-}
-/* --- trees.c */
-
-/* +++ inflate.c */
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-
-/* +++ infblock.h */
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-extern inflate_blocks_statef * inflate_blocks_new OF((
- z_streamp z,
- check_func c, /* check function */
- uInt w)); /* window size */
-
-extern int inflate_blocks OF((
- inflate_blocks_statef *,
- z_streamp ,
- int)); /* initial return code */
-
-extern void inflate_blocks_reset OF((
- inflate_blocks_statef *,
- z_streamp ,
- uLongf *)); /* check value on output */
-
-extern int inflate_blocks_free OF((
- inflate_blocks_statef *,
- z_streamp ,
- uLongf *)); /* check value on output */
-
-extern void inflate_set_dictionary OF((
- inflate_blocks_statef *s,
- const Bytef *d, /* dictionary */
- uInt n)); /* dictionary length */
-
-extern int inflate_addhistory OF((
- inflate_blocks_statef *,
- z_streamp));
-
-extern int inflate_packet_flush OF((
- inflate_blocks_statef *));
-/* --- infblock.h */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* inflate private state */
-struct internal_state {
-
- /* mode */
- enum {
- METHOD, /* waiting for method byte */
- FLAG, /* waiting for flag byte */
- DICT4, /* four dictionary check bytes to go */
- DICT3, /* three dictionary check bytes to go */
- DICT2, /* two dictionary check bytes to go */
- DICT1, /* one dictionary check byte to go */
- DICT0, /* waiting for inflateSetDictionary */
- BLOCKS, /* decompressing blocks */
- CHECK4, /* four check bytes to go */
- CHECK3, /* three check bytes to go */
- CHECK2, /* two check bytes to go */
- CHECK1, /* one check byte to go */
- DONE, /* finished check, done */
- BAD} /* got an error--stay here */
- mode; /* current inflate mode */
-
- /* mode dependent information */
- union {
- uInt method; /* if FLAGS, method byte */
- struct {
- uLong was; /* computed check value */
- uLong need; /* stream check value */
- } check; /* if CHECK, check values to compare */
- uInt marker; /* if BAD, inflateSync's marker bytes count */
- } sub; /* submode */
-
- /* mode independent information */
- int nowrap; /* flag for no wrapper */
- uInt wbits; /* log2(window size) (8..15, defaults to 15) */
- inflate_blocks_statef
- *blocks; /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(z)
-z_streamp z;
-{
- uLong c;
-
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- z->total_in = z->total_out = 0;
- z->msg = Z_NULL;
- z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
- inflate_blocks_reset(z->state->blocks, z, &c);
- Trace((stderr, "inflate: reset\n"));
- return Z_OK;
-}
-
-
-int inflateEnd(z)
-z_streamp z;
-{
- uLong c;
-
- if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->blocks != Z_NULL)
- inflate_blocks_free(z->state->blocks, z, &c);
- ZFREE(z, z->state);
- z->state = Z_NULL;
- Trace((stderr, "inflate: end\n"));
- return Z_OK;
-}
-
-
-int inflateInit2_(z, w, version, stream_size)
-z_streamp z;
-int w;
-const char *version;
-int stream_size;
-{
- if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
- stream_size != sizeof(z_stream))
- return Z_VERSION_ERROR;
-
- /* initialize state */
- if (z == Z_NULL)
- return Z_STREAM_ERROR;
- z->msg = Z_NULL;
-#ifndef NO_ZCFUNCS
- if (z->zalloc == Z_NULL)
- {
- z->zalloc = zcalloc;
- z->opaque = (voidpf)0;
- }
- if (z->zfree == Z_NULL) z->zfree = zcfree;
-#endif
- if ((z->state = (struct internal_state FAR *)
- ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
- return Z_MEM_ERROR;
- z->state->blocks = Z_NULL;
-
- /* handle undocumented nowrap option (no zlib header or check) */
- z->state->nowrap = 0;
- if (w < 0)
- {
- w = - w;
- z->state->nowrap = 1;
- }
-
- /* set window size */
- if (w < 8 || w > 15)
- {
- inflateEnd(z);
- return Z_STREAM_ERROR;
- }
- z->state->wbits = (uInt)w;
-
- /* create inflate_blocks state */
- if ((z->state->blocks =
- inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
- == Z_NULL)
- {
- inflateEnd(z);
- return Z_MEM_ERROR;
- }
- Trace((stderr, "inflate: allocated\n"));
-
- /* reset state */
- inflateReset(z);
- return Z_OK;
-}
-
-
-int inflateInit_(z, version, stream_size)
-z_streamp z;
-const char *version;
-int stream_size;
-{
- return inflateInit2_(z, DEF_WBITS, version, stream_size);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(z, f)
-z_streamp z;
-int f;
-{
- int r;
- uInt b;
-
- if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0)
- return Z_STREAM_ERROR;
- r = Z_BUF_ERROR;
- while (1) switch (z->state->mode)
- {
- case METHOD:
- NEEDBYTE
- if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
- {
- z->state->mode = BAD;
- z->msg = (char*)"unknown compression method";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
- {
- z->state->mode = BAD;
- z->msg = (char*)"invalid window size";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- z->state->mode = FLAG;
- case FLAG:
- NEEDBYTE
- b = NEXTBYTE;
- if (((z->state->sub.method << 8) + b) % 31)
- {
- z->state->mode = BAD;
- z->msg = (char*)"incorrect header check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Trace((stderr, "inflate: zlib header ok\n"));
- if (!(b & PRESET_DICT))
- {
- z->state->mode = BLOCKS;
- break;
- }
- z->state->mode = DICT4;
- case DICT4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = DICT3;
- case DICT3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = DICT2;
- case DICT2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = DICT1;
- case DICT1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
- z->adler = z->state->sub.check.need;
- z->state->mode = DICT0;
- return Z_NEED_DICT;
- case DICT0:
- z->state->mode = BAD;
- z->msg = (char*)"need dictionary";
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_STREAM_ERROR;
- case BLOCKS:
- r = inflate_blocks(z->state->blocks, z, r);
- if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
- r = inflate_packet_flush(z->state->blocks);
- if (r == Z_DATA_ERROR)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0; /* can try inflateSync */
- break;
- }
- if (r != Z_STREAM_END)
- return r;
- r = Z_OK;
- inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
- if (z->state->nowrap)
- {
- z->state->mode = DONE;
- break;
- }
- z->state->mode = CHECK4;
- case CHECK4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = CHECK3;
- case CHECK3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = CHECK2;
- case CHECK2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = CHECK1;
- case CHECK1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
-
- if (z->state->sub.check.was != z->state->sub.check.need)
- {
- z->state->mode = BAD;
- z->msg = (char*)"incorrect data check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Trace((stderr, "inflate: zlib check ok\n"));
- z->state->mode = DONE;
- case DONE:
- return Z_STREAM_END;
- case BAD:
- return Z_DATA_ERROR;
- default:
- return Z_STREAM_ERROR;
- }
-
- empty:
- if (f != Z_PACKET_FLUSH)
- return r;
- z->state->mode = BAD;
- z->msg = (char *)"need more for packet flush";
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_DATA_ERROR;
-}
-
-
-int inflateSetDictionary(z, dictionary, dictLength)
-z_streamp z;
-const Bytef *dictionary;
-uInt dictLength;
-{
- uInt length = dictLength;
-
- if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
- return Z_STREAM_ERROR;
-
- if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
- z->adler = 1L;
-
- if (length >= ((uInt)1<<z->state->wbits))
- {
- length = (1<<z->state->wbits)-1;
- dictionary += dictLength - length;
- }
- inflate_set_dictionary(z->state->blocks, dictionary, length);
- z->state->mode = BLOCKS;
- return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(z)
-z_stream *z;
-{
- if (z->state->mode != BLOCKS)
- return Z_DATA_ERROR;
- return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(z)
-z_streamp z;
-{
- uInt n; /* number of bytes to look at */
- Bytef *p; /* pointer to bytes */
- uInt m; /* number of marker bytes found in a row */
- uLong r, w; /* temporaries to save total_in and total_out */
-
- /* set up */
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->mode != BAD)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0;
- }
- if ((n = z->avail_in) == 0)
- return Z_BUF_ERROR;
- p = z->next_in;
- m = z->state->sub.marker;
-
- /* search */
- while (n && m < 4)
- {
- if (*p == (Byte)(m < 2 ? 0 : 0xff))
- m++;
- else if (*p)
- m = 0;
- else
- m = 4 - m;
- p++, n--;
- }
-
- /* restore */
- z->total_in += p - z->next_in;
- z->next_in = p;
- z->avail_in = n;
- z->state->sub.marker = m;
-
- /* return no joy or set up to restart on a new block */
- if (m != 4)
- return Z_DATA_ERROR;
- r = z->total_in; w = z->total_out;
- inflateReset(z);
- z->total_in = r; z->total_out = w;
- z->state->mode = BLOCKS;
- return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-/* --- inflate.c */
-
-/* +++ infblock.c */
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "infblock.h" */
-
-/* +++ inftrees.h */
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
- that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
- union {
- struct {
- Byte Exop; /* number of extra bits or operation */
- Byte Bits; /* number of bits in this code or subcode */
- } what;
- Bytef *pad; /* pad structure to a power of 2 (4 bytes for */
- } word; /* 16-bit, 8 bytes for 32-bit machines) */
- union {
- uInt Base; /* literal, length base, or distance base */
- inflate_huft *Next; /* pointer to next level of table */
- } more;
-};
-
-#ifdef DEBUG_ZLIB
- extern uInt inflate_hufts;
-#endif
-
-extern int inflate_trees_bits OF((
- uIntf *, /* 19 code lengths */
- uIntf *, /* bits tree desired/actual depth */
- inflate_huft * FAR *, /* bits tree result */
- z_streamp )); /* for zalloc, zfree functions */
-
-extern int inflate_trees_dynamic OF((
- uInt, /* number of literal/length codes */
- uInt, /* number of distance codes */
- uIntf *, /* that many (total) code lengths */
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *, /* distance tree result */
- z_streamp )); /* for zalloc, zfree functions */
-
-extern int inflate_trees_fixed OF((
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *)); /* distance tree result */
-
-extern int inflate_trees_free OF((
- inflate_huft *, /* tables to free */
- z_streamp )); /* for zfree function */
-
-/* --- inftrees.h */
-
-/* +++ infcodes.h */
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-extern inflate_codes_statef *inflate_codes_new OF((
- uInt, uInt,
- inflate_huft *, inflate_huft *,
- z_streamp ));
-
-extern int inflate_codes OF((
- inflate_blocks_statef *,
- z_streamp ,
- int));
-
-extern void inflate_codes_free OF((
- inflate_codes_statef *,
- z_streamp ));
-
-/* --- infcodes.h */
-
-/* +++ infutil.h */
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFUTIL_H
-#define _INFUTIL_H
-
-typedef enum {
- TYPE, /* get type bits (3, including end bit) */
- LENS, /* get lengths for stored */
- STORED, /* processing stored block */
- TABLE, /* get table lengths */
- BTREE, /* get bit lengths tree for a dynamic block */
- DTREE, /* get length, distance trees for a dynamic block */
- CODES, /* processing fixed or dynamic block */
- DRY, /* output remaining window bytes */
- DONEB, /* finished last block, done */
- BADB} /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
- /* mode */
- inflate_block_mode mode; /* current inflate_block mode */
-
- /* mode dependent information */
- union {
- uInt left; /* if STORED, bytes left to copy */
- struct {
- uInt table; /* table lengths (14 bits) */
- uInt index; /* index into blens (or border) */
- uIntf *blens; /* bit lengths of codes */
- uInt bb; /* bit length tree depth */
- inflate_huft *tb; /* bit length decoding tree */
- } trees; /* if DTREE, decoding info for trees */
- struct {
- inflate_huft *tl;
- inflate_huft *td; /* trees to free */
- inflate_codes_statef
- *codes;
- } decode; /* if CODES, current state */
- } sub; /* submode */
- uInt last; /* true if this block is the last block */
-
- /* mode independent information */
- uInt bitk; /* bits in bit buffer */
- uLong bitb; /* bit buffer */
- Bytef *window; /* sliding window */
- Bytef *end; /* one byte after sliding window */
- Bytef *read; /* window read pointer */
- Bytef *write; /* window write pointer */
- check_func checkfn; /* check function */
- uLong check; /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/* update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/* get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/* output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WWRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WWRAP if(m==0){FLUSH WWRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/* load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-extern uInt inflate_mask[17];
-
-/* copy as much as possible from the sliding window to the output area */
-extern int inflate_flush OF((
- inflate_blocks_statef *,
- z_streamp ,
- int));
-
-#ifndef NO_DUMMY_DECL
-struct internal_state {int dummy;}; /* for buggy compilers */
-#endif
-
-#endif
-/* --- infutil.h */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local const uInt border[] = { /* Order of the bit length code lengths */
- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
- Notes beyond the 1.93a appnote.txt:
-
- 1. Distance pointers never point before the beginning of the output
- stream.
- 2. Distance pointers can point back across blocks, up to 32k away.
- 3. There is an implied maximum of 7 bits for the bit length table and
- 15 bits for the actual data.
- 4. If only one code exists, then it is encoded using one bit. (Zero
- would be more efficient, but perhaps a little confusing.) If two
- codes exist, they are coded using one bit each (0 and 1).
- 5. There is no way of sending zero distance codes--a dummy must be
- sent if there are none. (History: a pre 2.0 version of PKZIP would
- store blocks with no distance codes, but this was discovered to be
- too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
- zero distance codes, which is sent as one code of zero bits in
- length.
- 6. There are up to 286 literal/length codes. Code 256 represents the
- end-of-block. Note however that the static length tree defines
- 288 codes just to fill out the Huffman codes. Codes 286 and 287
- cannot be used though, since there is no length base or extra bits
- defined for them. Similarily, there are up to 30 distance codes.
- However, static trees define 32 codes (all 5 bits) to fill out the
- Huffman codes, but the last two had better not show up in the data.
- 7. Unzip can check dynamic Huffman blocks for complete code sets.
- The exception is that a single code would not be complete (see #4).
- 8. The five bits following the block type is really the number of
- literal codes sent minus 257.
- 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
- (1+6+6). Therefore, to output three times the length, you output
- three codes (1+1+1), whereas to output four times the same length,
- you only need two codes (1+3). Hmm.
- 10. In the tree reconstruction algorithm, Code = Code + Increment
- only if BitLength(i) is not zero. (Pretty obvious.)
- 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
- 12. Note: length code 284 can represent 227-258, but length code 285
- really is 258. The last length deserves its own, short code
- since it gets used a lot in very redundant files. The length
- 258 is special since 258 - 3 (the min match length) is 255.
- 13. The literal/length and distance code bit lengths are read as a
- single stream of lengths. It is possible (and advantageous) for
- a repeat code (16, 17, or 18) to go across the boundary between
- the two sets of lengths.
- */
-
-
-void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
- if (s->checkfn != Z_NULL)
- *c = s->check;
- if (s->mode == BTREE || s->mode == DTREE)
- ZFREE(z, s->sub.trees.blens);
- if (s->mode == CODES)
- {
- inflate_codes_free(s->sub.decode.codes, z);
- inflate_trees_free(s->sub.decode.td, z);
- inflate_trees_free(s->sub.decode.tl, z);
- }
- s->mode = TYPE;
- s->bitk = 0;
- s->bitb = 0;
- s->read = s->write = s->window;
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0);
- Trace((stderr, "inflate: blocks reset\n"));
-}
-
-
-inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_streamp z;
-check_func c;
-uInt w;
-{
- inflate_blocks_statef *s;
-
- if ((s = (inflate_blocks_statef *)ZALLOC
- (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
- return s;
- if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
- {
- ZFREE(z, s);
- return Z_NULL;
- }
- s->end = s->window + w;
- s->checkfn = c;
- s->mode = TYPE;
- Trace((stderr, "inflate: blocks allocated\n"));
- inflate_blocks_reset(s, z, &s->check);
- return s;
-}
-
-
-#ifdef DEBUG_ZLIB
- extern uInt inflate_hufts;
-#endif
-int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
- uInt t; /* temporary storage */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input based on current state */
- while (1) switch (s->mode)
- {
- case TYPE:
- NEEDBITS(3)
- t = (uInt)b & 7;
- s->last = t & 1;
- switch (t >> 1)
- {
- case 0: /* stored */
- Trace((stderr, "inflate: stored block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- t = k & 7; /* go to byte boundary */
- DUMPBITS(t)
- s->mode = LENS; /* get length of stored block */
- break;
- case 1: /* fixed */
- Trace((stderr, "inflate: fixed codes block%s\n",
- s->last ? " (last)" : ""));
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
-
- inflate_trees_fixed(&bl, &bd, &tl, &td);
- s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
- if (s->sub.decode.codes == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.decode.tl = Z_NULL; /* don't try to free these */
- s->sub.decode.td = Z_NULL;
- }
- DUMPBITS(3)
- s->mode = CODES;
- break;
- case 2: /* dynamic */
- Trace((stderr, "inflate: dynamic codes block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- s->mode = TABLE;
- break;
- case 3: /* illegal */
- DUMPBITS(3)
- s->mode = BADB;
- z->msg = (char*)"invalid block type";
- r = Z_DATA_ERROR;
- LEAVE
- }
- break;
- case LENS:
- NEEDBITS(32)
- if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
- {
- s->mode = BADB;
- z->msg = (char*)"invalid stored block lengths";
- r = Z_DATA_ERROR;
- LEAVE
- }
- s->sub.left = (uInt)b & 0xffff;
- b = k = 0; /* dump bits */
- Tracev((stderr, "inflate: stored length %u\n", s->sub.left));
- s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
- break;
- case STORED:
- if (n == 0)
- LEAVE
- NEEDOUT
- t = s->sub.left;
- if (t > n) t = n;
- if (t > m) t = m;
- zmemcpy(q, p, t);
- p += t; n -= t;
- q += t; m -= t;
- if ((s->sub.left -= t) != 0)
- break;
- Tracev((stderr, "inflate: stored end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- s->mode = s->last ? DRY : TYPE;
- break;
- case TABLE:
- NEEDBITS(14)
- s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
- if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
- {
- s->mode = BADB;
- z->msg = (char*)"too many length or distance symbols";
- r = Z_DATA_ERROR;
- LEAVE
- }
-#endif
- t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
- if (t < 19)
- t = 19;
- if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- DUMPBITS(14)
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: table sizes ok\n"));
- s->mode = BTREE;
- case BTREE:
- while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
- {
- NEEDBITS(3)
- s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
- DUMPBITS(3)
- }
- while (s->sub.trees.index < 19)
- s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
- s->sub.trees.bb = 7;
- t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
- &s->sub.trees.tb, z);
- if (t != Z_OK)
- {
- ZFREE(z, s->sub.trees.blens);
- r = t;
- if (r == Z_DATA_ERROR)
- s->mode = BADB;
- LEAVE
- }
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: bits tree ok\n"));
- s->mode = DTREE;
- case DTREE:
- while (t = s->sub.trees.table,
- s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
- {
- inflate_huft *h;
- uInt i, j, c;
-
- t = s->sub.trees.bb;
- NEEDBITS(t)
- h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
- t = h->word.what.Bits;
- c = h->more.Base;
- if (c < 16)
- {
- DUMPBITS(t)
- s->sub.trees.blens[s->sub.trees.index++] = c;
- }
- else /* c == 16..18 */
- {
- i = c == 18 ? 7 : c - 14;
- j = c == 18 ? 11 : 3;
- NEEDBITS(t + i)
- DUMPBITS(t)
- j += (uInt)b & inflate_mask[i];
- DUMPBITS(i)
- i = s->sub.trees.index;
- t = s->sub.trees.table;
- if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
- (c == 16 && i < 1))
- {
- inflate_trees_free(s->sub.trees.tb, z);
- ZFREE(z, s->sub.trees.blens);
- s->mode = BADB;
- z->msg = (char*)"invalid bit length repeat";
- r = Z_DATA_ERROR;
- LEAVE
- }
- c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
- do {
- s->sub.trees.blens[i++] = c;
- } while (--j);
- s->sub.trees.index = i;
- }
- }
- inflate_trees_free(s->sub.trees.tb, z);
- s->sub.trees.tb = Z_NULL;
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
- inflate_codes_statef *c;
-
- bl = 9; /* must be <= 9 for lookahead assumptions */
- bd = 6; /* must be <= 9 for lookahead assumptions */
- t = s->sub.trees.table;
-#ifdef DEBUG_ZLIB
- inflate_hufts = 0;
-#endif
- t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
- s->sub.trees.blens, &bl, &bd, &tl, &td, z);
- ZFREE(z, s->sub.trees.blens);
- if (t != Z_OK)
- {
- if (t == (uInt)Z_DATA_ERROR)
- s->mode = BADB;
- r = t;
- LEAVE
- }
- Tracev((stderr, "inflate: trees ok, %d * %d bytes used\n",
- inflate_hufts, sizeof(inflate_huft)));
- if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
- {
- inflate_trees_free(td, z);
- inflate_trees_free(tl, z);
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.decode.codes = c;
- s->sub.decode.tl = tl;
- s->sub.decode.td = td;
- }
- s->mode = CODES;
- case CODES:
- UPDATE
- if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
- return inflate_flush(s, z, r);
- r = Z_OK;
- inflate_codes_free(s->sub.decode.codes, z);
- inflate_trees_free(s->sub.decode.td, z);
- inflate_trees_free(s->sub.decode.tl, z);
- LOAD
- Tracev((stderr, "inflate: codes end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- if (!s->last)
- {
- s->mode = TYPE;
- break;
- }
- if (k > 7) /* return unused byte, if any */
- {
- Assert(k < 16, "inflate_codes grabbed too many bytes")
- k -= 8;
- n++;
- p--; /* can always return one */
- }
- s->mode = DRY;
- case DRY:
- FLUSH
- if (s->read != s->write)
- LEAVE
- s->mode = DONEB;
- case DONEB:
- r = Z_STREAM_END;
- LEAVE
- case BADB:
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-int inflate_blocks_free(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
- inflate_blocks_reset(s, z, c);
- ZFREE(z, s->window);
- ZFREE(z, s);
- Trace((stderr, "inflate: blocks freed\n"));
- return Z_OK;
-}
-
-
-void inflate_set_dictionary(s, d, n)
-inflate_blocks_statef *s;
-const Bytef *d;
-uInt n;
-{
- zmemcpy((charf *)s->window, d, n);
- s->read = s->write = s->window + n;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-int inflate_addhistory(s, z)
-inflate_blocks_statef *s;
-z_stream *z;
-{
- uLong b; /* bit buffer */ /* NOT USED HERE */
- uInt k; /* bits in bit buffer */ /* NOT USED HERE */
- uInt t; /* temporary storage */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- if (s->read != s->write)
- return Z_STREAM_ERROR;
- if (s->mode != TYPE)
- return Z_DATA_ERROR;
-
- /* we're ready to rock */
- LOAD
- /* while there is input ready, copy to output buffer, moving
- * pointers as needed.
- */
- while (n) {
- t = n; /* how many to do */
- /* is there room until end of buffer? */
- if (t > m) t = m;
- /* update check information */
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(s->check, q, t);
- zmemcpy(q, p, t);
- q += t;
- p += t;
- n -= t;
- z->total_out += t;
- s->read = q; /* drag read pointer forward */
-/* WWRAP */ /* expand WWRAP macro by hand to handle s->read */
- if (q == s->end) {
- s->read = q = s->window;
- m = WAVAIL;
- }
- }
- UPDATE
- return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-int inflate_packet_flush(s)
- inflate_blocks_statef *s;
-{
- if (s->mode != LENS)
- return Z_DATA_ERROR;
- s->mode = TYPE;
- return Z_OK;
-}
-/* --- infblock.c */
-
-/* +++ inftrees.c */
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-
-char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-
-#ifndef NO_DUMMY_DECL
-struct internal_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
- uIntf *, /* code lengths in bits */
- uInt, /* number of codes */
- uInt, /* number of "simple" codes */
- const uIntf *, /* list of base values for non-simple codes */
- const uIntf *, /* list of extra bits for non-simple codes */
- inflate_huft * FAR*,/* result: starting table */
- uIntf *, /* maximum lookup bits (returns actual) */
- z_streamp )); /* for zalloc function */
-
-local voidpf falloc OF((
- voidpf, /* opaque pointer (not used) */
- uInt, /* number of items */
- uInt)); /* size of item */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
- 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
- /* see note #13 above about 258 */
-local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
- 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
- 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
- 8193, 12289, 16385, 24577};
-local const uInt cpdext[30] = { /* Extra bits for distance codes */
- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
- 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
- 12, 12, 13, 13};
-
-/*
- Huffman code decoding is performed using a multi-level table lookup.
- The fastest way to decode is to simply build a lookup table whose
- size is determined by the longest code. However, the time it takes
- to build this table can also be a factor if the data being decoded
- is not very long. The most common codes are necessarily the
- shortest codes, so those codes dominate the decoding time, and hence
- the speed. The idea is you can have a shorter table that decodes the
- shorter, more probable codes, and then point to subsidiary tables for
- the longer codes. The time it costs to decode the longer codes is
- then traded against the time it takes to make longer tables.
-
- This results of this trade are in the variables lbits and dbits
- below. lbits is the number of bits the first level table for literal/
- length codes can decode in one step, and dbits is the same thing for
- the distance codes. Subsequent tables are also less than or equal to
- those sizes. These values may be adjusted either when all of the
- codes are shorter than that, in which case the longest code length in
- bits is used, or when the shortest code is *longer* than the requested
- table size, in which case the length of the shortest code in bits is
- used.
-
- There are two different values for the two tables, since they code a
- different number of possibilities each. The literal/length table
- codes 286 possible values, or in a flat code, a little over eight
- bits. The distance table codes 30 possible values, or a little less
- than five bits, flat. The optimum values for speed end up being
- about one bit more than those, so lbits is 8+1 and dbits is 5+1.
- The optimum values may differ though from machine to machine, and
- possibly even between compilers. Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15 /* maximum bit length of any code */
-#define N_MAX 288 /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
- uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
-uIntf *b; /* code lengths in bits (all assumed <= BMAX) */
-uInt n; /* number of codes (assumed <= N_MAX) */
-uInt s; /* number of simple-valued codes (0..s-1) */
-const uIntf *d; /* list of base values for non-simple codes */
-const uIntf *e; /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t; /* result: starting table */
-uIntf *m; /* maximum lookup bits, returns actual */
-z_streamp zs; /* for zalloc function */
-/* Given a list of code lengths and a maximum table size, make a set of
- tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
- if the given code set is incomplete (the tables are still built in this
- case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of
- lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
- uInt a; /* counter for codes of length k */
- uInt c[BMAX+1]; /* bit length count table */
- uInt f; /* i repeats in table every f entries */
- int g; /* maximum code length */
- int h; /* table level */
- register uInt i; /* counter, current code */
- register uInt j; /* counter */
- register int k; /* number of bits in current code */
- int l; /* bits per table (returned in m) */
- register uIntf *p; /* pointer into c[], b[], or v[] */
- inflate_huft *q; /* points to current table */
- struct inflate_huft_s r; /* table entry for structure assignment */
- inflate_huft *u[BMAX]; /* table stack */
- uInt v[N_MAX]; /* values in order of bit length */
- register int w; /* bits before this table == (l * h) */
- uInt x[BMAX+1]; /* bit offsets, then code stack */
- uIntf *xp; /* pointer into x */
- int y; /* number of dummy codes added */
- uInt z; /* number of entries in current table */
-
-
- /* Generate counts for each bit length */
- p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
- C4 /* clear c[]--assume BMAX+1 is 16 */
- p = b; i = n;
- do {
- c[*p++]++; /* assume all entries <= BMAX */
- } while (--i);
- if (c[0] == n) /* null input--all zero length codes */
- {
- *t = (inflate_huft *)Z_NULL;
- *m = 0;
- return Z_OK;
- }
-
-
- /* Find minimum and maximum length, bound *m by those */
- l = *m;
- for (j = 1; j <= BMAX; j++)
- if (c[j])
- break;
- k = j; /* minimum code length */
- if ((uInt)l < j)
- l = j;
- for (i = BMAX; i; i--)
- if (c[i])
- break;
- g = i; /* maximum code length */
- if ((uInt)l > i)
- l = i;
- *m = l;
-
-
- /* Adjust last length count to fill out codes, if needed */
- for (y = 1 << j; j < i; j++, y <<= 1)
- if ((y -= c[j]) < 0)
- return Z_DATA_ERROR;
- if ((y -= c[i]) < 0)
- return Z_DATA_ERROR;
- c[i] += y;
-
-
- /* Generate starting offsets into the value table for each length */
- x[1] = j = 0;
- p = c + 1; xp = x + 2;
- while (--i) { /* note that i == g from above */
- *xp++ = (j += *p++);
- }
-
-
- /* Make a table of values in order of bit lengths */
- p = b; i = 0;
- do {
- if ((j = *p++) != 0)
- v[x[j]++] = i;
- } while (++i < n);
- n = x[g]; /* set n to length of v */
-
-
- /* Generate the Huffman codes and for each, make the table entries */
- x[0] = i = 0; /* first Huffman code is zero */
- p = v; /* grab values in bit order */
- h = -1; /* no tables yet--level -1 */
- w = -l; /* bits decoded == (l * h) */
- u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */
- q = (inflate_huft *)Z_NULL; /* ditto */
- z = 0; /* ditto */
-
- /* go through the bit lengths (k already is bits in shortest code) */
- for (; k <= g; k++)
- {
- a = c[k];
- while (a--)
- {
- /* here i is the Huffman code of length k bits for value *p */
- /* make tables up to required level */
- while (k > w + l)
- {
- h++;
- w += l; /* previous table always l bits */
-
- /* compute minimum size table less than or equal to l bits */
- z = g - w;
- z = z > (uInt)l ? l : z; /* table size upper limit */
- if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */
- { /* too few codes for k-w bit table */
- f -= a + 1; /* deduct codes from patterns left */
- xp = c + k;
- if (j < z)
- while (++j < z) /* try smaller tables up to z bits */
- {
- if ((f <<= 1) <= *++xp)
- break; /* enough codes to use up j bits */
- f -= *xp; /* else deduct codes from patterns */
- }
- }
- z = 1 << j; /* table entries for j-bit table */
-
- /* allocate and link in new table */
- if ((q = (inflate_huft *)ZALLOC
- (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
- {
- if (h)
- inflate_trees_free(u[0], zs);
- return Z_MEM_ERROR; /* not enough memory */
- }
-#ifdef DEBUG_ZLIB
- inflate_hufts += z + 1;
-#endif
- *t = q + 1; /* link to list for huft_free() */
- *(t = &(q->next)) = Z_NULL;
- u[h] = ++q; /* table starts after link */
-
- /* connect to last table, if there is one */
- if (h)
- {
- x[h] = i; /* save pattern for backing up */
- r.bits = (Byte)l; /* bits to dump before this table */
- r.exop = (Byte)j; /* bits in this table */
- r.next = q; /* pointer to this table */
- j = i >> (w - l); /* (get around Turbo C bug) */
- u[h-1][j] = r; /* connect to last table */
- }
- }
-
- /* set up table entry in r */
- r.bits = (Byte)(k - w);
- if (p >= v + n)
- r.exop = 128 + 64; /* out of values--invalid code */
- else if (*p < s)
- {
- r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */
- r.base = *p++; /* simple code is just the value */
- }
- else
- {
- r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
- r.base = d[*p++ - s];
- }
-
- /* fill code-like entries with r */
- f = 1 << (k - w);
- for (j = i >> w; j < z; j += f)
- q[j] = r;
-
- /* backwards increment the k-bit code i */
- for (j = 1 << (k - 1); i & j; j >>= 1)
- i ^= j;
- i ^= j;
-
- /* backup over finished tables */
- while ((i & ((1 << w) - 1)) != x[h])
- {
- h--; /* don't need to update q */
- w -= l;
- }
- }
- }
-
-
- /* Return Z_BUF_ERROR if we were given an incomplete table */
- return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-int inflate_trees_bits(c, bb, tb, z)
-uIntf *c; /* 19 code lengths */
-uIntf *bb; /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-z_streamp z; /* for zfree function */
-{
- int r;
-
- r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed dynamic bit lengths tree";
- else if (r == Z_BUF_ERROR || *bb == 0)
- {
- inflate_trees_free(*tb, z);
- z->msg = (char*)"incomplete dynamic bit lengths tree";
- r = Z_DATA_ERROR;
- }
- return r;
-}
-
-
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
-uInt nl; /* number of literal/length codes */
-uInt nd; /* number of distance codes */
-uIntf *c; /* that many (total) code lengths */
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_streamp z; /* for zfree function */
-{
- int r;
-
- /* build literal/length tree */
- r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z);
- if (r != Z_OK || *bl == 0)
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed literal/length tree";
- else if (r != Z_MEM_ERROR)
- {
- inflate_trees_free(*tl, z);
- z->msg = (char*)"incomplete literal/length tree";
- r = Z_DATA_ERROR;
- }
- return r;
- }
-
- /* build distance tree */
- r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z);
- if (r != Z_OK || (*bd == 0 && nl > 257))
- {
- if (r == Z_DATA_ERROR)
- z->msg = (char*)"oversubscribed distance tree";
- else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
- r = Z_OK;
- }
-#else
- inflate_trees_free(*td, z);
- z->msg = (char*)"incomplete distance tree";
- r = Z_DATA_ERROR;
- }
- else if (r != Z_MEM_ERROR)
- {
- z->msg = (char*)"empty distance tree with lengths";
- r = Z_DATA_ERROR;
- }
- inflate_trees_free(*tl, z);
- return r;
-#endif
- }
-
- /* done */
- return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_built = 0;
-#define FIXEDH 530 /* number of hufts used by fixed tables */
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(q, n, s)
-voidpf q; /* opaque pointer */
-uInt n; /* number of items */
-uInt s; /* size of item */
-{
- Assert(s == sizeof(inflate_huft) && n <= *(intf *)q,
- "inflate_trees falloc overflow");
- *(intf *)q -= n+s-s; /* s-s to avoid warning */
- return (voidpf)(fixed_mem + *(intf *)q);
-}
-
-
-int inflate_trees_fixed(bl, bd, tl, td)
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-{
- /* build fixed tables if not already (multiple overlapped executions ok) */
- if (!fixed_built)
- {
- int k; /* temporary variable */
- unsigned c[288]; /* length list for huft_build */
- z_stream z; /* for falloc function */
- int f = FIXEDH; /* number of hufts left in fixed_mem */
-
- /* set up fake z_stream for memory routines */
- z.zalloc = falloc;
- z.zfree = Z_NULL;
- z.opaque = (voidpf)&f;
-
- /* literal table */
- for (k = 0; k < 144; k++)
- c[k] = 8;
- for (; k < 256; k++)
- c[k] = 9;
- for (; k < 280; k++)
- c[k] = 7;
- for (; k < 288; k++)
- c[k] = 8;
- fixed_bl = 7;
- huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
- /* distance table */
- for (k = 0; k < 30; k++)
- c[k] = 5;
- fixed_bd = 5;
- huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
- /* done */
- Assert(f == 0, "invalid build of fixed tables");
- fixed_built = 1;
- }
- *bl = fixed_bl;
- *bd = fixed_bd;
- *tl = fixed_tl;
- *td = fixed_td;
- return Z_OK;
-}
-
-
-int inflate_trees_free(t, z)
-inflate_huft *t; /* table to free */
-z_streamp z; /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
- list of the tables it made, with the links in a dummy first entry of
- each table. */
-{
- register inflate_huft *p, *q, *r;
-
- /* Reverse linked list */
- p = Z_NULL;
- q = t;
- while (q != Z_NULL)
- {
- r = (q - 1)->next;
- (q - 1)->next = p;
- p = q;
- q = r;
- }
- /* Go through linked list, freeing from the malloced (t[-1]) address. */
- while (p != Z_NULL)
- {
- q = (--p)->next;
- ZFREE(z,p);
- p = q;
- }
- return Z_OK;
-}
-/* --- inftrees.c */
-
-/* +++ infcodes.c */
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-/* #include "infblock.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-
-/* +++ inffast.h */
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-extern int inflate_fast OF((
- uInt,
- uInt,
- inflate_huft *,
- inflate_huft *,
- inflate_blocks_statef *,
- z_streamp ));
-/* --- inffast.h */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
- /* mode */
- enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- START, /* x: set up for LEN */
- LEN, /* i: get length/literal/eob next */
- LENEXT, /* i: getting length extra (have base) */
- DIST, /* i: get distance next */
- DISTEXT, /* i: getting distance extra */
- COPY, /* o: copying bytes in window, waiting for space */
- LIT, /* o: got literal, waiting for output space */
- WASH, /* o: got eob, possibly still output waiting */
- END, /* x: got eob and all data flushed */
- BADCODE} /* x: got error */
- mode; /* current inflate_codes mode */
-
- /* mode dependent information */
- uInt len;
- union {
- struct {
- inflate_huft *tree; /* pointer into tree */
- uInt need; /* bits needed */
- } code; /* if LEN or DIST, where in tree */
- uInt lit; /* if LIT, literal */
- struct {
- uInt get; /* bits to get for extra */
- uInt dist; /* distance back to copy from */
- } copy; /* if EXT or COPY, where and how much */
- } sub; /* submode */
-
- /* mode independent information */
- Byte lbits; /* ltree bits decoded per branch */
- Byte dbits; /* dtree bits decoder per branch */
- inflate_huft *ltree; /* literal/length/eob tree */
- inflate_huft *dtree; /* distance tree */
-
-};
-
-
-inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-z_streamp z;
-{
- inflate_codes_statef *c;
-
- if ((c = (inflate_codes_statef *)
- ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
- {
- c->mode = START;
- c->lbits = (Byte)bl;
- c->dbits = (Byte)bd;
- c->ltree = tl;
- c->dtree = td;
- Tracev((stderr, "inflate: codes new\n"));
- }
- return c;
-}
-
-
-int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
- uInt j; /* temporary storage */
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- Bytef *f; /* pointer to copy strings from */
- inflate_codes_statef *c = s->sub.decode.codes; /* codes state */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input and output based on current state */
- while (1) switch (c->mode)
- { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- case START: /* x: set up for LEN */
-#ifndef SLOW
- if (m >= 258 && n >= 10)
- {
- UPDATE
- r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
- LOAD
- if (r != Z_OK)
- {
- c->mode = r == Z_STREAM_END ? WASH : BADCODE;
- break;
- }
- }
-#endif /* !SLOW */
- c->sub.code.need = c->lbits;
- c->sub.code.tree = c->ltree;
- c->mode = LEN;
- case LEN: /* i: get length/literal/eob next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e == 0) /* literal */
- {
- c->sub.lit = t->base;
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", t->base));
- c->mode = LIT;
- break;
- }
- if (e & 16) /* length */
- {
- c->sub.copy.get = e & 15;
- c->len = t->base;
- c->mode = LENEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t->next;
- break;
- }
- if (e & 32) /* end of block */
- {
- Tracevv((stderr, "inflate: end of block\n"));
- c->mode = WASH;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid literal/length code";
- r = Z_DATA_ERROR;
- LEAVE
- case LENEXT: /* i: getting length extra (have base) */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->len += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- c->sub.code.need = c->dbits;
- c->sub.code.tree = c->dtree;
- Tracevv((stderr, "inflate: length %u\n", c->len));
- c->mode = DIST;
- case DIST: /* i: get distance next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e & 16) /* distance */
- {
- c->sub.copy.get = e & 15;
- c->sub.copy.dist = t->base;
- c->mode = DISTEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t->next;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = (char*)"invalid distance code";
- r = Z_DATA_ERROR;
- LEAVE
- case DISTEXT: /* i: getting distance extra */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->sub.copy.dist += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));
- c->mode = COPY;
- case COPY: /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
- f = (uInt)(q - s->window) < c->sub.copy.dist ?
- s->end - (c->sub.copy.dist - (q - s->window)) :
- q - c->sub.copy.dist;
-#else
- f = q - c->sub.copy.dist;
- if ((uInt)(q - s->window) < c->sub.copy.dist)
- f = s->end - (c->sub.copy.dist - (uInt)(q - s->window));
-#endif
- while (c->len)
- {
- NEEDOUT
- OUTBYTE(*f++)
- if (f == s->end)
- f = s->window;
- c->len--;
- }
- c->mode = START;
- break;
- case LIT: /* o: got literal, waiting for output space */
- NEEDOUT
- OUTBYTE(c->sub.lit)
- c->mode = START;
- break;
- case WASH: /* o: got eob, possibly more output */
- FLUSH
- if (s->read != s->write)
- LEAVE
- c->mode = END;
- case END:
- r = Z_STREAM_END;
- LEAVE
- case BADCODE: /* x: got error */
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_streamp z;
-{
- ZFREE(z, c);
- Tracev((stderr, "inflate: codes free\n"));
-}
-/* --- infcodes.c */
-
-/* +++ infutil.c */
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "infblock.h" */
-/* #include "inftrees.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* And'ing with mask[n] masks the lower n bits */
-uInt inflate_mask[17] = {
- 0x0000,
- 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
- uInt n;
- Bytef *p;
- Bytef *q;
-
- /* local copies of source and destination pointers */
- p = z->next_out;
- q = s->read;
-
- /* compute number of bytes to copy as far as end of window */
- n = (uInt)((q <= s->write ? s->write : s->end) - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy as far as end of window */
- if (p != Z_NULL) {
- zmemcpy(p, q, n);
- p += n;
- }
- q += n;
-
- /* see if more to copy at beginning of window */
- if (q == s->end)
- {
- /* wrap pointers */
- q = s->window;
- if (s->write == s->end)
- s->write = s->window;
-
- /* compute bytes to copy */
- n = (uInt)(s->write - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy */
- if (p != Z_NULL) {
- zmemcpy(p, q, n);
- p += n;
- }
- q += n;
- }
-
- /* update pointers */
- z->next_out = p;
- s->read = q;
-
- /* done */
- return r;
-}
-/* --- infutil.c */
-
-/* +++ inffast.c */
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-/* #include "infblock.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-/* #include "inffast.h" */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
- (the maximum string length) and number of input bytes available
- at least ten. The ten bytes are six bytes for the longest length/
- distance pair plus four bytes for overloading the bit buffer. */
-
-int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-inflate_blocks_statef *s;
-z_streamp z;
-{
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- uInt ml; /* mask for literal/length tree */
- uInt md; /* mask for distance tree */
- uInt c; /* bytes to copy */
- uInt d; /* distance back to copy from */
- Bytef *r; /* copy source pointer */
-
- /* load input, output, bit values */
- LOAD
-
- /* initialize masks */
- ml = inflate_mask[bl];
- md = inflate_mask[bd];
-
- /* do until not enough input or output space for fast loop */
- do { /* assume called with m >= 258 && n >= 10 */
- /* get literal/length code */
- GRABBITS(20) /* max bits for literal/length code */
- if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- continue;
- }
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits for length */
- e &= 15;
- c = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * length %u\n", c));
-
- /* decode distance base of block to copy */
- GRABBITS(15); /* max bits for distance code */
- e = (t = td + ((uInt)b & md))->exop;
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits to add to distance base */
- e &= 15;
- GRABBITS(e) /* get extra bits (up to 13) */
- d = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * distance %u\n", d));
-
- /* do the copy */
- m -= c;
- if ((uInt)(q - s->window) >= d) /* offset before dest */
- { /* just copy */
- r = q - d;
- *q++ = *r++; c--; /* minimum count is three, */
- *q++ = *r++; c--; /* so unroll loop a little */
- }
- else /* else offset after destination */
- {
- e = d - (uInt)(q - s->window); /* bytes from offset to end */
- r = s->end - e; /* pointer to offset */
- if (c > e) /* if source crosses, */
- {
- c -= e; /* copy to end of window */
- do {
- *q++ = *r++;
- } while (--e);
- r = s->window; /* copy rest from start of window */
- }
- }
- do { /* copy all or what's left */
- *q++ = *r++;
- } while (--c);
- break;
- }
- else if ((e & 64) == 0)
- e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
- else
- {
- z->msg = (char*)"invalid distance code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- break;
- }
- if ((e & 64) == 0)
- {
- if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- break;
- }
- }
- else if (e & 32)
- {
- Tracevv((stderr, "inflate: * end of block\n"));
- UNGRAB
- UPDATE
- return Z_STREAM_END;
- }
- else
- {
- z->msg = (char*)"invalid literal/length code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- } while (m >= 258 && n >= 10);
-
- /* not enough input or output--restore pointers and return */
- UNGRAB
- UPDATE
- return Z_OK;
-}
-/* --- inffast.c */
-
-/* +++ zutil.c */
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: zutil.c,v 1.17 1996/07/24 13:41:12 me Exp $ */
-
-#ifdef DEBUG_ZLIB
-#include <stdio.h>
-#endif
-
-/* #include "zutil.h" */
-
-#ifndef NO_DUMMY_DECL
-struct internal_state {int dummy;}; /* for buggy compilers */
-#endif
-
-#ifndef STDC
-extern void exit OF((int));
-#endif
-
-const char *z_errmsg[10] = {
-"need dictionary", /* Z_NEED_DICT 2 */
-"stream end", /* Z_STREAM_END 1 */
-"", /* Z_OK 0 */
-"file error", /* Z_ERRNO (-1) */
-"stream error", /* Z_STREAM_ERROR (-2) */
-"data error", /* Z_DATA_ERROR (-3) */
-"insufficient memory", /* Z_MEM_ERROR (-4) */
-"buffer error", /* Z_BUF_ERROR (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
-
-
-const char *zlibVersion()
-{
- return ZLIB_VERSION;
-}
-
-#ifdef DEBUG_ZLIB
-void z_error (m)
- char *m;
-{
- fprintf(stderr, "%s\n", m);
- exit(1);
-}
-#endif
-
-#ifndef HAVE_MEMCPY
-
-void zmemcpy(dest, source, len)
- Bytef* dest;
- Bytef* source;
- uInt len;
-{
- if (len == 0) return;
- do {
- *dest++ = *source++; /* ??? to be unrolled */
- } while (--len != 0);
-}
-
-int zmemcmp(s1, s2, len)
- Bytef* s1;
- Bytef* s2;
- uInt len;
-{
- uInt j;
-
- for (j = 0; j < len; j++) {
- if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
- }
- return 0;
-}
-
-void zmemzero(dest, len)
- Bytef* dest;
- uInt len;
-{
- if (len == 0) return;
- do {
- *dest++ = 0; /* ??? to be unrolled */
- } while (--len != 0);
-}
-#endif
-
-#ifdef __TURBOC__
-#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
-/* Small and medium model in Turbo C are for now limited to near allocation
- * with reduced MAX_WBITS and MAX_MEM_LEVEL
- */
-# define MY_ZCALLOC
-
-/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
- * and farmalloc(64K) returns a pointer with an offset of 8, so we
- * must fix the pointer. Warning: the pointer must be put back to its
- * original form in order to free it, use zcfree().
- */
-
-#define MAX_PTR 10
-/* 10*64K = 640K */
-
-local int next_ptr = 0;
-
-typedef struct ptr_table_s {
- voidpf org_ptr;
- voidpf new_ptr;
-} ptr_table;
-
-local ptr_table table[MAX_PTR];
-/* This table is used to remember the original form of pointers
- * to large buffers (64K). Such pointers are normalized with a zero offset.
- * Since MSDOS is not a preemptive multitasking OS, this table is not
- * protected from concurrent access. This hack doesn't work anyway on
- * a protected system like OS/2. Use Microsoft C instead.
- */
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
- voidpf buf = opaque; /* just to make some compilers happy */
- ulg bsize = (ulg)items*size;
-
- /* If we allocate less than 65520 bytes, we assume that farmalloc
- * will return a usable pointer which doesn't have to be normalized.
- */
- if (bsize < 65520L) {
- buf = farmalloc(bsize);
- if (*(ush*)&buf != 0) return buf;
- } else {
- buf = farmalloc(bsize + 16L);
- }
- if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
- table[next_ptr].org_ptr = buf;
-
- /* Normalize the pointer to seg:0 */
- *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
- *(ush*)&buf = 0;
- table[next_ptr++].new_ptr = buf;
- return buf;
-}
-
-void zcfree (voidpf opaque, voidpf ptr)
-{
- int n;
- if (*(ush*)&ptr != 0) { /* object < 64K */
- farfree(ptr);
- return;
- }
- /* Find the original pointer */
- for (n = 0; n < next_ptr; n++) {
- if (ptr != table[n].new_ptr) continue;
-
- farfree(table[n].org_ptr);
- while (++n < next_ptr) {
- table[n-1] = table[n];
- }
- next_ptr--;
- return;
- }
- ptr = opaque; /* just to make some compilers happy */
- Assert(0, "zcfree: ptr not found");
-}
-#endif
-#endif /* __TURBOC__ */
-
-
-#if defined(M_I86) && !defined(__32BIT__)
-/* Microsoft C in 16-bit mode */
-
-# define MY_ZCALLOC
-
-#if (!defined(_MSC_VER) || (_MSC_VER < 600))
-# define _halloc halloc
-# define _hfree hfree
-#endif
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
- if (opaque) opaque = 0; /* to make compiler happy */
- return _halloc((long)items, size);
-}
-
-void zcfree (voidpf opaque, voidpf ptr)
-{
- if (opaque) opaque = 0; /* to make compiler happy */
- _hfree(ptr);
-}
-
-#endif /* MSC */
-
-
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp calloc OF((uInt items, uInt size));
-extern void free OF((voidpf ptr));
-#endif
-
-voidpf zcalloc (opaque, items, size)
- voidpf opaque;
- unsigned items;
- unsigned size;
-{
- if (opaque) items += size - size; /* make compiler happy */
- return (voidpf)calloc(items, size);
-}
-
-void zcfree (opaque, ptr)
- voidpf opaque;
- voidpf ptr;
-{
- free(ptr);
- if (opaque) return; /* make compiler happy */
-}
-
-#endif /* MY_ZCALLOC */
-/* --- zutil.c */
-
-/* +++ adler32.c */
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: adler32.c,v 1.10 1996/05/22 11:52:18 me Exp $ */
-
-/* #include "zlib.h" */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i) {s1 += buf[i]; s2 += s1;}
-#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf) DO8(buf,0); DO8(buf,8);
-
-/* ========================================================================= */
-uLong adler32(adler, buf, len)
- uLong adler;
- const Bytef *buf;
- uInt len;
-{
- unsigned long s1 = adler & 0xffff;
- unsigned long s2 = (adler >> 16) & 0xffff;
- int k;
-
- if (buf == Z_NULL) return 1L;
-
- while (len > 0) {
- k = len < NMAX ? len : NMAX;
- len -= k;
- while (k >= 16) {
- DO16(buf);
- buf += 16;
- k -= 16;
- }
- if (k != 0) do {
- s1 += *buf++;
- s2 += s1;
- } while (--k);
- s1 %= BASE;
- s2 %= BASE;
- }
- return (s2 << 16) | s1;
-}
-/* --- adler32.c */
diff --git a/mdk-stage1/ppp/common/zlib.h b/mdk-stage1/ppp/common/zlib.h
deleted file mode 100644
index 188ddaff9..000000000
--- a/mdk-stage1/ppp/common/zlib.h
+++ /dev/null
@@ -1,1010 +0,0 @@
-/* $Id$ */
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-1.0.4
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- * ==FILEVERSION 971127==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-
-/* +++ zlib.h */
-/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.0.4, Jul 24th, 1996.
-
- Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- gzip@prep.ai.mit.edu madler@alumni.caltech.edu
-
-
- The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
- (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* +++ zconf.h */
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: zconf.h,v 1.20 1996/07/02 15:09:28 me Exp $ */
-
-#ifndef _ZCONF_H
-#define _ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- */
-#ifdef Z_PREFIX
-# define deflateInit_ z_deflateInit_
-# define deflate z_deflate
-# define deflateEnd z_deflateEnd
-# define inflateInit_ z_inflateInit_
-# define inflate z_inflate
-# define inflateEnd z_inflateEnd
-# define deflateInit2_ z_deflateInit2_
-# define deflateSetDictionary z_deflateSetDictionary
-# define deflateCopy z_deflateCopy
-# define deflateReset z_deflateReset
-# define deflateParams z_deflateParams
-# define inflateInit2_ z_inflateInit2_
-# define inflateSetDictionary z_inflateSetDictionary
-# define inflateSync z_inflateSync
-# define inflateReset z_inflateReset
-# define compress z_compress
-# define uncompress z_uncompress
-# define adler32 z_adler32
-# define crc32 z_crc32
-# define get_crc_table z_get_crc_table
-
-# define Byte z_Byte
-# define uInt z_uInt
-# define uLong z_uLong
-# define Bytef z_Bytef
-# define charf z_charf
-# define intf z_intf
-# define uIntf z_uIntf
-# define uLongf z_uLongf
-# define voidpf z_voidpf
-# define voidp z_voidp
-#endif
-
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-# define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-# ifndef __32BIT__
-# define __32BIT__
-# endif
-#endif
-#if defined(__MSDOS__) && !defined(MSDOS)
-# define MSDOS
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#if defined(MSDOS) && !defined(__32BIT__)
-# define MAXSEG_64K
-#endif
-#ifdef MSDOS
-# define UNALIGNED_OK
-#endif
-
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32)) && !defined(STDC)
-# define STDC
-#endif
-#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC)
-# define STDC
-#endif
-
-#ifndef STDC
-# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-# define const
-# endif
-#endif
-
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
-# define NO_DUMMY_DECL
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-# ifdef MAXSEG_64K
-# define MAX_MEM_LEVEL 8
-# else
-# define MAX_MEM_LEVEL 9
-# endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-# define MAX_WBITS 15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
- 1 << (windowBits+2) + 1 << (memLevel+9)
- that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
- make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
- The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
- /* Type declarations */
-
-#ifndef OF /* function prototypes */
-# ifdef STDC
-# define OF(args) args
-# else
-# define OF(args) ()
-# endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h. If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
- /* MSC small or medium model */
-# define SMALL_MEDIUM
-# ifdef _MSC_VER
-# define FAR __far
-# else
-# define FAR far
-# endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-# ifndef __32BIT__
-# define SMALL_MEDIUM
-# define FAR __far
-# endif
-#endif
-#ifndef FAR
-# define FAR
-#endif
-
-typedef unsigned char Byte; /* 8 bits */
-typedef unsigned int uInt; /* 16 bits or more */
-typedef unsigned long uLong; /* 32 bits or more */
-
-#if defined(__BORLANDC__) && defined(SMALL_MEDIUM)
- /* Borland C/C++ ignores FAR inside typedef */
-# define Bytef Byte FAR
-#else
- typedef Byte FAR Bytef;
-#endif
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
- typedef void FAR *voidpf;
- typedef void *voidp;
-#else
- typedef Byte FAR *voidpf;
- typedef Byte *voidp;
-#endif
-
-
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL)
-# include <windows.h>
-# define EXPORT WINAPI
-#else
-# define EXPORT
-#endif
-
-#endif /* _ZCONF_H */
-/* --- zconf.h */
-
-#define ZLIB_VERSION "1.0.4P"
-
-/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms may be added later and will have the same
- stream interface.
-
- For compression the application must provide the output buffer and
- may optionally provide the input buffer for optimization. For decompression,
- the application must provide the input buffer and may optionally provide
- the output buffer for optimization.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
-
- The library does not install any signal handler. It is recommended to
- add at least a handler for SIGSEGV when decompressing; the library checks
- the consistency of the input data whenever possible but may go nuts
- for some forms of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void (*free_func) OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
- uInt avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
-
- Bytef *next_out; /* next output byte should be put there */
- uInt avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
-
- char *msg; /* last error message, NULL if no error */
- struct internal_state FAR *state; /* not visible by applications */
-
- alloc_func zalloc; /* used to allocate the internal state */
- free_func zfree; /* used to free the internal state */
- voidpf opaque; /* private data object passed to zalloc and zfree */
-
- int data_type; /* best guess about the data type: ascii or binary */
- uLong adler; /* adler32 value of the uncompressed data */
- uLong reserved; /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
-
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- opaque value.
-
- zalloc must return Z_NULL if there is not enough memory for the object.
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
-*/
-
- /* constants */
-
-#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1
-#define Z_PACKET_FLUSH 2
-#define Z_SYNC_FLUSH 3
-#define Z_FULL_FLUSH 4
-#define Z_FINISH 5
-/* Allowed flush values; see deflate() below for details */
-
-#define Z_OK 0
-#define Z_STREAM_END 1
-#define Z_NEED_DICT 2
-#define Z_ERRNO (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR (-3)
-#define Z_MEM_ERROR (-4)
-#define Z_BUF_ERROR (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION 0
-#define Z_BEST_SPEED 1
-#define Z_BEST_COMPRESSION 9
-#define Z_DEFAULT_COMPRESSION (-1)
-/* compression levels */
-
-#define Z_FILTERED 1
-#define Z_HUFFMAN_ONLY 2
-#define Z_DEFAULT_STRATEGY 0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY 0
-#define Z_ASCII 1
-#define Z_UNKNOWN 2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED 8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
- /* basic functions */
-
-extern const char * EXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- This check is automatically made by deflateInit and inflateInit.
- */
-
-/*
-extern int EXPORT deflateInit OF((z_streamp strm, int level));
-
- Initializes the internal stream state for compression. The fields
- zalloc, zfree and opaque must be initialized before by the caller.
- If zalloc and zfree are set to Z_NULL, deflateInit updates them to
- use default allocation functions.
-
- The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at
- all (the input data is simply copied a block at a time).
- Z_DEFAULT_COMPRESSION requests a default compromise between speed and
- compression (currently equivalent to level 6).
-
- deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if level is not a valid compression level,
- Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
- with the version assumed by the caller (ZLIB_VERSION).
- msg is set to null if there is no error message. deflateInit does not
- perform any compression: this will be done by deflate().
-*/
-
-
-extern int EXPORT deflate OF((z_streamp strm, int flush));
-/*
- Performs one or both of the following actions:
-
- - Compress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in and avail_in are updated and
- processing will resume at this point for the next call of deflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. This action is forced if the parameter flush is non zero.
- Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
-
- Before the call of deflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating avail_in or avail_out accordingly; avail_out
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
- and with zero avail_out, it must be called again after making room in the
- output buffer because there might be more output pending.
-
- If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
- block is terminated and flushed to the output buffer so that the
- decompressor can get all input data available so far. For method 9, a future
- variant on method 8, the current block will be flushed but not terminated.
- Z_SYNC_FLUSH has the same effect as partial flush except that the compressed
- output is byte aligned (the compressor can clear its internal bit buffer)
- and the current block is always terminated; this can be useful if the
- compressor has to be restarted from scratch after an interruption (in which
- case the internal state of the compressor may be lost).
- If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
- special marker is output and the compression dictionary is discarded; this
- is useful to allow the decompressor to synchronize if one compressed block
- has been damaged (see inflateSync below). Flushing degrades compression and
- so should be used only when necessary. Using Z_FULL_FLUSH too often can
- seriously degrade the compression. If deflate returns with avail_out == 0,
- this function must be called again with the same value of the flush
- parameter and more output space (updated avail_out), until the flush is
- complete (deflate returns with non-zero avail_out).
-
- If the parameter flush is set to Z_PACKET_FLUSH, the compression
- block is terminated, and a zero-length stored block is output,
- omitting the length bytes (the effect of this is that the 3-bit type
- code 000 for a stored block is output, and the output is then
- byte-aligned). This is designed for use at the end of a PPP packet.
-
- If the parameter flush is set to Z_FINISH, pending input is processed,
- pending output is flushed and deflate returns with Z_STREAM_END if there
- was enough output space; if deflate returns with Z_OK, this function must be
- called again with Z_FINISH and more output space (updated avail_out) but no
- more input data, until it returns with Z_STREAM_END or an error. After
- deflate has returned Z_STREAM_END, the only possible operations on the
- stream are deflateReset or deflateEnd.
-
- Z_FINISH can be used immediately after deflateInit if all the compression
- is to be done in a single step. In this case, avail_out must be at least
- 0.1% larger than avail_in plus 12 bytes. If deflate does not return
- Z_STREAM_END, then it must be called again as described above.
-
- deflate() may update data_type if it can make a good guess about
- the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
-
- deflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if all input has been
- consumed and all output has been produced (only when flush is set to
- Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
- if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int EXPORT deflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
- stream state was inconsistent, Z_DATA_ERROR if the stream was freed
- prematurely (some input or output was discarded). In the error case,
- msg may be set but then points to a static string (which must not be
- deallocated).
-*/
-
-
-/*
-extern int EXPORT inflateInit OF((z_streamp strm));
-
- Initializes the internal stream state for decompression. The fields
- zalloc, zfree and opaque must be initialized before by the caller. If
- zalloc and zfree are set to Z_NULL, inflateInit updates them to use default
- allocation functions.
-
- inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_VERSION_ERROR if the zlib library version is incompatible
- with the version assumed by the caller. msg is set to null if there is no
- error message. inflateInit does not perform any decompression: this will be
- done by inflate().
-*/
-
-
-extern int EXPORT inflate OF((z_streamp strm, int flush));
-/*
- Performs one or both of the following actions:
-
- - Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() provides as much output as possible, until there
- is no more input data or no more space in the output buffer (see below
- about the flush parameter).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate(). If inflate returns Z_OK and with zero avail_out, it
- must be called again after making room in the output buffer because there
- might be more output pending.
-
- If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
- inflate flushes as much output as possible to the output buffer. The
- flushing behavior of inflate is not specified for values of the flush
- parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
- current implementation actually flushes as much output as possible
- anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data
- has been consumed, it is expecting to see the length field of a stored
- block; if not, it returns Z_DATA_ERROR.
-
- inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster routine
- may be used for the single inflate() call.
-
- inflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if the end of the
- compressed data has been reached and all uncompressed output has been
- produced, Z_NEED_DICT if a preset dictionary is needed at this point (see
- inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted,
- Z_STREAM_ERROR if the stream structure was inconsistent (for example if
- next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
- Z_BUF_ERROR if no progress is possible or if there was not enough room in
- the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the
- application may then call inflateSync to look for a good compression block.
- In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the
- dictionary chosen by the compressor.
-*/
-
-
-extern int EXPORT inflateEnd OF((z_streamp strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
-*/
-
- /* Advanced functions */
-
-/*
- The following functions are needed only in some special applications.
-*/
-
-/*
-extern int EXPORT deflateInit2 OF((z_streamp strm,
- int level,
- int method,
- int windowBits,
- int memLevel,
- int strategy));
-
- This is another version of deflateInit with more compression options. The
- fields next_in, zalloc, zfree and opaque must be initialized before by
- the caller.
-
- The method parameter is the compression method. It must be Z_DEFLATED in
- this version of the library. (Method 9 will allow a 64K history buffer and
- partial block flushes.)
-
- The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library (the value 16 will be allowed for method 9). Larger
- values of this parameter result in better compression at the expense of
- memory usage. The default value is 15 if deflateInit is used instead.
-
- The memLevel parameter specifies how much memory should be allocated
- for the internal compression state. memLevel=1 uses minimum memory but
- is slow and reduces compression ratio; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.
-
- The strategy parameter is used to tune the compression algorithm. Use the
- value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
- filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
- string match). Filtered data consists mostly of small values with a
- somewhat random distribution. In this case, the compression algorithm is
- tuned to compress them better. The effect of Z_FILTERED is to force more
- Huffman coding and less string matching; it is somewhat intermediate
- between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
- the compression ratio but not the correctness of the compressed output even
- if it is not set appropriately.
-
- If next_in is not null, the library will use this buffer to hold also
- some history information; the buffer must either hold the entire input
- data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
- is null, the library will allocate its own history buffer (and leave next_in
- null). next_out need not be provided here but must be provided by the
- application for the next call of deflate().
-
- If the history buffer is provided by the application, next_in must
- must never be changed by the application since the compressor maintains
- information inside this buffer from call to call; the application
- must provide more input only by increasing avail_in. next_in is always
- reset by the library in this case.
-
- deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
- not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
- an invalid method). msg is set to null if there is no error message.
- deflateInit2 does not perform any compression: this will be done by
- deflate().
-*/
-
-extern int EXPORT deflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the compression dictionary (history buffer) from the given
- byte sequence without producing any compressed output. This function must
- be called immediately after deflateInit or deflateInit2, before any call
- of deflate. The compressor and decompressor must use exactly the same
- dictionary (see inflateSetDictionary).
- The dictionary should consist of strings (byte sequences) that are likely
- to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
- dictionary is most useful when the data to be compressed is short and
- can be predicted with good accuracy; the data can then be compressed better
- than with the default empty dictionary. In this version of the library,
- only the last 32K bytes of the dictionary are used.
- Upon return of this function, strm->adler is set to the Adler32 value
- of the dictionary; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The Adler32 value
- applies to the whole dictionary even if only a subset of the dictionary is
- actually used by the compressor.)
-
- deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state
- is inconsistent (for example if deflate has already been called for this
- stream). deflateSetDictionary does not perform any compression: this will
- be done by deflate().
-*/
-
-extern int EXPORT deflateCopy OF((z_streamp dest,
- z_streamp source));
-/*
- Sets the destination stream as a complete copy of the source stream. If
- the source stream is using an application-supplied history buffer, a new
- buffer is allocated for the destination stream. The compressed output
- buffer is always application-supplied. It's the responsibility of the
- application to provide the correct values of next_out and avail_out for the
- next call of deflate.
-
- This function can be useful when several compression strategies will be
- tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
- by calling deflateEnd. Note that deflateCopy duplicates the internal
- compression state which can be quite large, so this strategy is slow and
- can consume lots of memory.
-
- deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
- destination.
-*/
-
-extern int EXPORT deflateReset OF((z_streamp strm));
-/*
- This function is equivalent to deflateEnd followed by deflateInit,
- but does not free and reallocate all the internal compression state.
- The stream will keep the same compression level and any other attributes
- that may have been set by deflateInit2.
-
- deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy));
-/*
- Dynamically update the compression level and compression strategy.
- This can be used to switch between compression and straight copy of
- the input data, or to switch to a different kind of input data requiring
- a different strategy. If the compression level is changed, the input
- available so far is compressed with the old level (and may be flushed);
- the new level will take effect only at the next call of deflate().
-
- Before the call of deflateParams, the stream state must be set as for
- a call of deflate(), since the currently available input may have to
- be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
- deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
- stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
- if strm->avail_out was zero.
-*/
-
-extern int EXPORT deflateOutputPending OF((z_streamp strm));
-/*
- Returns the number of bytes of output which are immediately
- available from the compressor (i.e. without any further input
- or flush).
-*/
-
-/*
-extern int EXPORT inflateInit2 OF((z_streamp strm,
- int windowBits));
-
- This is another version of inflateInit with more compression options. The
- fields next_out, zalloc, zfree and opaque must be initialized before by
- the caller.
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library (the value 16 will be allowed soon). The
- default value is 15 if inflateInit is used instead. If a compressed stream
- with a larger window size is given as input, inflate() will return with
- the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
- If next_out is not null, the library will use this buffer for the history
- buffer; the buffer must either be large enough to hold the entire output
- data, or have at least 1<<windowBits bytes. If next_out is null, the
- library will allocate its own buffer (and leave next_out null). next_in
- need not be provided here but must be provided by the application for the
- next call of inflate().
-
- If the history buffer is provided by the application, next_out must
- never be changed by the application since the decompressor maintains
- history information inside this buffer from call to call; the application
- can only reset next_out to the beginning of the history buffer when
- avail_out is zero and all output has been consumed.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
- not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
- windowBits < 8). msg is set to null if there is no error message.
- inflateInit2 does not perform any decompression: this will be done by
- inflate().
-*/
-
-extern int EXPORT inflateSetDictionary OF((z_streamp strm,
- const Bytef *dictionary,
- uInt dictLength));
-/*
- Initializes the decompression dictionary (history buffer) from the given
- uncompressed byte sequence. This function must be called immediately after
- a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen
- by the compressor can be determined from the Adler32 value returned by this
- call of inflate. The compressor and decompressor must use exactly the same
- dictionary (see deflateSetDictionary).
-
- inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
- inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
- expected one (incorrect Adler32 value). inflateSetDictionary does not
- perform any decompression: this will be done by subsequent calls of
- inflate().
-*/
-
-extern int EXPORT inflateSync OF((z_streamp strm));
-/*
- Skips invalid compressed data until the special marker (see deflate()
- above) can be found, or until all available input is skipped. No output
- is provided.
-
- inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no marker has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
-*/
-
-extern int EXPORT inflateReset OF((z_streamp strm));
-/*
- This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
-
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
- This function adds the data at next_in (avail_in bytes) to the output
- history without performing any output. There must be no pending output,
- and the decompressor must be expecting to see the start of a block.
- Calling this function is equivalent to decompressing a stored block
- containing the data at next_in (except that the data is not output).
-*/
-
- /* utility functions */
-
-/*
- The following utility functions are implemented on top of the
- basic stream-oriented functions. To simplify the interface, some
- default options are assumed (compression level, window size,
- standard memory allocation functions). The source code of these
- utility functions can easily be modified if you need special options.
-*/
-
-extern int EXPORT compress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Compresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be at least 0.1% larger than
- sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
- compressed buffer.
- This function can be used to compress a whole file at once if the
- input file is mmap'ed.
- compress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer.
-*/
-
-extern int EXPORT uncompress OF((Bytef *dest, uLongf *destLen,
- const Bytef *source, uLong sourceLen));
-/*
- Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be large enough to hold the
- entire uncompressed data. (The size of the uncompressed data must have
- been saved previously by the compressor and transmitted to the decompressor
- by some mechanism outside the scope of this compression library.)
- Upon exit, destLen is the actual size of the compressed buffer.
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
-
- uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_BUF_ERROR if there was not enough room in the output
- buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-
-
-typedef voidp gzFile;
-
-extern gzFile EXPORT gzopen OF((const char *path, const char *mode));
-/*
- Opens a gzip (.gz) file for reading or writing. The mode parameter
- is as in fopen ("rb" or "wb") but can also include a compression level
- ("wb9"). gzopen can be used to read a file which is not in gzip format;
- in this case gzread will directly read from the file without decompression.
- gzopen returns NULL if the file could not be opened or if there was
- insufficient memory to allocate the (de)compression state; errno
- can be checked to distinguish the two cases (if errno is zero, the
- zlib error is Z_MEM_ERROR).
-*/
-
-extern gzFile EXPORT gzdopen OF((int fd, const char *mode));
-/*
- gzdopen() associates a gzFile with the file descriptor fd. File
- descriptors are obtained from calls like open, dup, creat, pipe or
- fileno (in the file has been previously opened with fopen).
- The mode parameter is as in gzopen.
- The next call of gzclose on the returned gzFile will also close the
- file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
- descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
- gzdopen returns NULL if there was insufficient memory to allocate
- the (de)compression state.
-*/
-
-extern int EXPORT gzread OF((gzFile file, voidp buf, unsigned len));
-/*
- Reads the given number of uncompressed bytes from the compressed file.
- If the input file was not in gzip format, gzread copies the given number
- of bytes into the buffer.
- gzread returns the number of uncompressed bytes actually read (0 for
- end of file, -1 for error). */
-
-extern int EXPORT gzwrite OF((gzFile file, const voidp buf, unsigned len));
-/*
- Writes the given number of uncompressed bytes into the compressed file.
- gzwrite returns the number of uncompressed bytes actually written
- (0 in case of error).
-*/
-
-extern int EXPORT gzflush OF((gzFile file, int flush));
-/*
- Flushes all pending output into the compressed file. The parameter
- flush is as in the deflate() function. The return value is the zlib
- error number (see function gzerror below). gzflush returns Z_OK if
- the flush parameter is Z_FINISH and all output could be flushed.
- gzflush should be called only when strictly necessary because it can
- degrade compression.
-*/
-
-extern int EXPORT gzclose OF((gzFile file));
-/*
- Flushes all pending output if necessary, closes the compressed file
- and deallocates all the (de)compression state. The return value is the zlib
- error number (see function gzerror below).
-*/
-
-extern const char * EXPORT gzerror OF((gzFile file, int *errnum));
-/*
- Returns the error message for the last error which occurred on the
- given compressed file. errnum is set to zlib error number. If an
- error occurred in the file system and not in the compression library,
- errnum is set to Z_ERRNO and the application may consult errno
- to get the exact error code.
-*/
-
- /* checksum functions */
-
-/*
- These functions are not related to compression but are exported
- anyway because they might be useful in applications using the
- compression library.
-*/
-
-extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
-/*
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
-
- uLong adler = adler32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- adler = adler32(adler, buffer, length);
- }
- if (adler != original_adler) error();
-*/
-
-extern uLong EXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
-/*
- Update a running crc with the bytes buf[0..len-1] and return the updated
- crc. If buf is NULL, this function returns the required initial value
- for the crc. Pre- and post-conditioning (one's complement) is performed
- within this function so it shouldn't be done by the application.
- Usage example:
-
- uLong crc = crc32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- crc = crc32(crc, buffer, length);
- }
- if (crc != original_crc) error();
-*/
-
-
- /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-extern int EXPORT deflateInit_ OF((z_streamp strm, int level,
- const char *version, int stream_size));
-extern int EXPORT inflateInit_ OF((z_streamp strm,
- const char *version, int stream_size));
-extern int EXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
- int windowBits, int memLevel, int strategy,
- const char *version, int stream_size));
-extern int EXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
- const char *version, int stream_size));
-#define deflateInit(strm, level) \
- deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
- inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
- deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
- (strategy), ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
- inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
- struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _ZLIB_H */
-/* --- zlib.h */
diff --git a/mdk-stage1/ppp/configure b/mdk-stage1/ppp/configure
deleted file mode 100755
index 544fb0d71..000000000
--- a/mdk-stage1/ppp/configure
+++ /dev/null
@@ -1,141 +0,0 @@
-#!/bin/sh
-# $Id$
-
-# if [ -d /NextApps ]; then
-# system="NeXTStep"
-# else
- system=`uname -s`
- release=`uname -r`
- machine=`uname -p`
- arch=`uname -m`
-# fi
-state="unknown"
-
-case $system in
- Linux)
- makext="linux";
- ksrc="linux";
- state="known";;
- SunOS)
- case $release in
-# [0-3]*) state="ancient";;
-# 4*) state="known"; ksrc="sunos4"; makext="sunos4";;
- 5.[1-6]*) state="known"; ksrc="solaris"; makext="sol2";;
- 5.[7-9]*) state="known"; ksrc="solaris"; makext="sol2";
- case $arch in
- sun4u) lp64='y';;
- *) ;;
- esac;;
- esac;;
- NetBSD|FreeBSD|ULTRIX|OSF1|NeXTStep|SINIX-?|UNIX_SV|UNIX_System_V)
- state="notincluded";;
-# NetBSD)
-# makext="bsd";
-# case $release in
-# 0.*) state="ancient";;
-# 1.0*) state="ancient";;
-# 1.1*) state="known"; ksrc="netbsd-1.1";;
-# 1.2*) state="known"; ksrc="netbsd-1.2"; makext="netbsd-1.2";;
-# 1.[3-9]*|[2-9]*)
-# state="late"; ksrc="netbsd-1.2";;
-# esac;;
-# ULTRIX)
-# makext="ultrix";
-# case $release in
-# [0-3]*) state="ancient";;
-# 4.[01]*) state="early"; ksrc="ultrix";;
-# 4.[234]) state="known"; ksrc="ultrix";;
-# esac;;
-# OSF1)
-# makext="osf";
-# case $release in
-# V1.*) state="neolithic"; ksrc="osf1";;
-# V[23].*) state="neolithic"; ksrc="osf1";;
-# V4.*) state="known"; ksrc="osf1";;
-# V[5-9]*) state="late"; ksrc="osf1";;
-# esac;;
-# FreeBSD)
-# makext="bsd";
-# case $release in
-# 1.*) state="known"; ksrc="freebsd-old";;
-# 2.[01]*) state="known"; ksrc="freebsd-2.0";;
-# 2.2.[2-7]*) state="late"; ksrc="freebsd-2.0";;
-# 2.2.8*) state="known"; ksrc="freebsd-2.2.8";;
-# 3.[0-1]*) state="known"; ksrc="freebsd-3.0";;
-# esac;;
-# NeXTStep)
-# makext="NeXT";
-# ksrc="NeXT";
-# state="known";;
-# SINIX-?)
-# case $release in
-# 5.4[01]) state=known; ksrc=svr4; makext=svr4;;
-# 5.4[2-9]) state=late; ksrc=svr4; makext=svr4;;
-# esac;;
-# # Intel SVR4 systems come with a bug in the uname program. Unless
-# # your provider fixed the bug, or you get a fix for it, uname -S will
-# # overwrite the system name with the node name!
-# UNIX_SV|UNIX_System_V|`uname -n`)
-# case $release in
-# 4.0) state=known; ksrc=svr4; makext=svr4;;
-# 4.2) state=late; ksrc=svr4; makext=svr4;;
-# esac;;
-esac
-
-if [ -d "$ksrc" ]; then :; else
- state="notincluded"
- unset ksrc
-fi
-
-case $state in
- neolithic)
- echo "This is a newer release on an outdated OS ($system)."
- echo " This software may or may not work on this OS."
- echo " You may want to download an older version of PPP for this OS.";;
- ancient)
- echo "This is an old release of a supported OS ($system)."
- echo "This software cannot be used as-is on this system,"
- echo "but you may be able to port it. Good luck!"
- exit;;
- early)
- echo "This is an old release of a supported OS ($system)."
- echo "This software should install and run on this system,"
- echo "but it hasn't been tested.";;
- late)
- echo "This is a newer release of $system than is supported by"
- echo "this software. It may or may not work.";;
- unknown)
- echo "This software has not been ported to this system. Sorry.";;
- notincluded)
- echo "Support for this system has not been included"
- echo "in this distribution. Sorry.";;
-esac
-
-orig_makext=$makext
-
-if [ -d "$ksrc" ]; then
- echo "Creating links to Makefiles."
- rm -f Makefile
- ln -s $ksrc/Makefile.top Makefile
- echo " Makefile -> $ksrc/Makefile.top"
- if [ "$ksrc" = solaris ]; then
- # Point to 64-bit Makefile extension
- if [ "$lp64" = y ]; then
- makext=$makext-64
- fi
- rm -f $ksrc/Makefile
- ln -s Makefile.$makext $ksrc/Makefile
- echo " $ksrc/Makefile -> Makefile.$makext"
- # Restore extension
- if [ "$lp64" = y ]; then
- makext=$orig_makext
- fi
- fi
- for dir in pppd pppstats chat pppdump; do
- rm -f $dir/Makefile
- if [ -f $dir/Makefile.$makext ]; then
- ln -s Makefile.$makext $dir/Makefile
- echo " $dir/Makefile -> Makefile.$makext"
- fi
- done
-fi
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux b/mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux
deleted file mode 100644
index 7eb217dac..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux
+++ /dev/null
@@ -1,16 +0,0 @@
-all: pppgetpass.vt pppgetpass.gtk
-
-pppgetpass.vt: pppgetpass.vt.o
-
-pppgetpass.gtk: pppgetpass.gtk.o
- $(CC) $(LDFLAGS) pppgetpass.gtk.o `gtk-config --libs` -o pppgetpass.gtk
-pppgetpass.gtk.o: pppgetpass.gtk.c
- $(CC) $(CFLAGS) -c pppgetpass.gtk.c `gtk-config --cflags`
-
-install: all
- install -m 755 pppgetpass.sh /usr/bin/pppgetpass
- install -m 4755 -o root -g root pppgetpass.vt /usr/bin/
- install -m 755 -o root -g root pppgetpass.gtk /usr/X11/bin/
-
-clean:
- rm -f *.o pppgetpass.gtk pppgetpass.vt core
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8 b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8
deleted file mode 100644
index ade576970..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8
+++ /dev/null
@@ -1,18 +0,0 @@
-.TH PPPGETPASS 8 "26 Sep 1999"
-.SH NAME
-pppgetpass \- prompt for PAP password
-.SH SYNOPSIS
-.B pppgetpass
-.I client server fd
-.SH DESCRIPTION
-.B pppgetpass
-the outer half of a plugin for PAP password prompting in pppd.
-If the peer requires PAP, and the
-.B passprompt.so
-plugin is loaded into pppd, it will run
-.B /usr/sbin/pppgetpass
-(or another program specified by the
-.B promptprog
-option) to prompt the user for the password.
-.SH SEE ALSO
-pppd(8)
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c
deleted file mode 100644
index 48ca04202..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <glib.h>
-#include <gdk/gdk.h>
-#include <gtk/gtkwindow.h>
-#include <gtk/gtkmain.h>
-#include <gtk/gtkbutton.h>
-#include <gtk/gtkvbox.h>
-#include <gtk/gtklabel.h>
-#include <gtk/gtkentry.h>
-#include <gtk/gtksignal.h>
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <syslog.h>
-
-int outfd;
-int err;
-
-static void okpressed(void *widget, void *clientdata)
-{
- GtkWidget *answer=clientdata;
- gchar *pass;
- int passlen;
- ssize_t wrote;
- (void)widget;
-
- pass=gtk_entry_get_text(GTK_ENTRY(answer));
-
- passlen=strlen(pass);
- if(!passlen)
- return;
-
- if((wrote=write(outfd, pass, passlen))!=passlen) {
- if(wrote<0)
- syslog(LOG_ERR, "write error on outpipe: %m");
- else
- syslog(LOG_ERR, "short write on outpipe");
- err=1;
- }
- gtk_main_quit();
-}
-
-int main(int argc, char **argv)
-{
- GtkWidget *mainwindow, *vbox, *question, *answer, *ok;
- char buf[1024];
- gtk_init(&argc, &argv);
-
- openlog(argv[0], LOG_PID, LOG_DAEMON);
- if(argc!=4) {
- syslog(LOG_WARNING, "Usage error");
- return 1;
- }
- outfd=atoi(argv[3]);
- mainwindow=gtk_window_new(GTK_WINDOW_TOPLEVEL);
- gtk_window_set_title(GTK_WINDOW(mainwindow), "pppgetpass");
- gtk_signal_connect(GTK_OBJECT(mainwindow), "destroy",
- GTK_SIGNAL_FUNC(gtk_main_quit), 0);
-
- vbox=gtk_vbox_new(FALSE, 5);
- gtk_container_add(GTK_CONTAINER(mainwindow), vbox);
- gtk_widget_show(vbox);
-
- if(argv[1][0] && argv[2][0])
- snprintf(buf, sizeof buf, "Password for PPP client %s on server %s: ", argv[1], argv[2]);
- else if(argv[1][0] && !argv[2][0])
- snprintf(buf, sizeof buf, "Password for PPP client %s: ", argv[1]);
- else if(!argv[1][0] && argv[2][0])
- snprintf(buf, sizeof buf, "Password for PPP on server %s: ", argv[2]);
- else
- snprintf(buf, sizeof buf, "Enter PPP password: ");
- question=gtk_label_new(buf);
- gtk_box_pack_start(GTK_BOX(vbox), question, FALSE, TRUE, 0);
- gtk_widget_show(question);
-
- answer=gtk_entry_new();
- gtk_entry_set_visibility(GTK_ENTRY(answer), 0);
- gtk_box_pack_start(GTK_BOX(vbox), answer, FALSE, TRUE, 0);
- gtk_widget_show(answer);
-
- ok=gtk_button_new_with_label("OK");
- gtk_box_pack_start(GTK_BOX(vbox), ok, FALSE, TRUE, 0);
- gtk_signal_connect(GTK_OBJECT(ok), "clicked",
- GTK_SIGNAL_FUNC(okpressed), answer);
- gtk_widget_show(ok);
-
- gtk_widget_show(mainwindow);
- gtk_main();
-
- return err;
-}
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh
deleted file mode 100644
index 09c480519..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-if [ -z "$DISPLAY" ]; then
- exec pppgetpass.vt "$@"
-else
- exec pppgetpass.gtk "$@"
-fi
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c
deleted file mode 100644
index a1520883c..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c
+++ /dev/null
@@ -1,218 +0,0 @@
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <syslog.h>
-#include <termios.h>
-#include <sys/vt.h>
-
-static int console_owner(uid_t, int);
-
-int main(int argc, char **argv)
-{
- int console;
- uid_t uid;
- struct vt_stat origstate;
- int openvtnum;
- char openvtname[256];
- int openvt;
- gid_t gid;
- int chowned;
- FILE *fp;
- struct termios t;
- char pass[256], *nl;
- int outfd, passlen;
- ssize_t wrote;
- console=open("/dev/console", O_RDWR);
-
- uid=getuid();
- gid=getgid();
- seteuid(uid);
-
- openlog(argv[0], LOG_PID, LOG_DAEMON);
-
- if(argc!=4) {
- syslog(LOG_WARNING, "Usage error");
- return 1;
- }
-
- if(console<0) {
- syslog(LOG_ERR, "open(/dev/console): %m");
- return 1;
- }
-
- if(ioctl(console, VT_GETSTATE, &origstate)<0) {
- syslog(LOG_ERR, "VT_GETSTATE: %m");
- return 1;
- }
-
- if(uid) {
- if(!console_owner(uid, origstate.v_active)) {
- int i;
- for(i=0;i<64;++i) {
- if(i!=origstate.v_active && console_owner(uid, i))
- break;
- }
- if(i==64) {
- syslog(LOG_WARNING, "run by uid %lu not at console", (unsigned long)uid);
- return 1;
- }
- }
- }
-
- if(ioctl(console, VT_OPENQRY, &openvtnum)<0) {
- syslog(LOG_ERR, "VT_OPENQRY: %m");
- return 1;
- }
- if(openvtnum==-1) {
- syslog(LOG_ERR, "No free VTs");
- return 1;
- }
-
- snprintf(openvtname, sizeof openvtname, "/dev/tty%d", openvtnum);
- seteuid(0);
- openvt=open(openvtname, O_RDWR);
- if(openvt<0) {
- seteuid(uid);
- syslog(LOG_ERR, "open(%s): %m", openvtname);
- return 1;
- }
-
- chowned=fchown(openvt, uid, gid);
- if(chowned<0) {
- seteuid(uid);
- syslog(LOG_ERR, "fchown(%s): %m", openvtname);
- return 1;
- }
-
- close(console);
-
- if(ioctl(openvt, VT_ACTIVATE, openvtnum)<0) {
- seteuid(uid);
- syslog(LOG_ERR, "VT_ACTIVATE(%d): %m", openvtnum);
- return 1;
- }
-
- while(ioctl(openvt, VT_WAITACTIVE, openvtnum)<0) {
- if(errno!=EINTR) {
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- syslog(LOG_ERR, "VT_WAITACTIVE(%d): %m", openvtnum);
- return 1;
- }
- }
-
- seteuid(uid);
- fp=fdopen(openvt, "r+");
- if(!fp) {
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- syslog(LOG_ERR, "fdopen(%s): %m", openvtname);
- return 1;
- }
-
- if(tcgetattr(openvt, &t)<0) {
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- syslog(LOG_ERR, "tcgetattr(%s): %m", openvtname);
- return 1;
- }
- t.c_lflag &= ~ECHO;
- if(tcsetattr(openvt, TCSANOW, &t)<0) {
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- syslog(LOG_ERR, "tcsetattr(%s): %m", openvtname);
- return 1;
- }
-
- if(fprintf(fp, "\033[2J\033[H")<0) {
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- syslog(LOG_ERR, "write error on %s: %m", openvtname);
- return 1;
- }
- if(argv[1][0] && argv[2][0]) {
- if(fprintf(fp, "Password for PPP client %s on server %s: ", argv[1], argv[2])<0) {
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- syslog(LOG_ERR, "write error on %s: %m", openvtname);
- return 1;
- }
- } else if(argv[1][0] && !argv[2][0]) {
- if(fprintf(fp, "Password for PPP client %s: ", argv[1])<0) {
- syslog(LOG_ERR, "write error on %s: %m", openvtname);
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- return 1;
- }
- } else if(!argv[1][0] && argv[2][0]) {
- if(fprintf(fp, "Password for PPP on server %s: ", argv[2])<0) {
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- syslog(LOG_ERR, "write error on %s: %m", openvtname);
- return 1;
- }
- } else {
- if(fprintf(fp, "Enter PPP password: ")<0) {
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- syslog(LOG_ERR, "write error on %s: %m", openvtname);
- return 1;
- }
- }
-
- if(!fgets(pass, sizeof pass, fp)) {
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- if(ferror(fp)) {
- syslog(LOG_ERR, "read error on %s: %m", openvtname);
- }
- return 1;
- }
- if((nl=strchr(pass, '\n')))
- *nl=0;
- passlen=strlen(pass);
-
- outfd=atoi(argv[3]);
- if((wrote=write(outfd, pass, passlen))!=passlen) {
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- if(wrote<0)
- syslog(LOG_ERR, "write error on outpipe: %m");
- else
- syslog(LOG_ERR, "short write on outpipe");
- return 1;
- }
-
- seteuid(0);
- ioctl(openvt, VT_ACTIVATE, origstate.v_active);
- seteuid(uid);
- return 0;
-}
-
-static int console_owner(uid_t uid, int cons)
-{
- char name[256];
- struct stat st;
- snprintf(name, sizeof name, "/dev/tty%d", cons);
- if(stat(name, &st)<0) {
- if(errno!=ENOENT)
- syslog(LOG_ERR, "stat(%s): %m", name);
- return 0;
- }
- return uid==st.st_uid;
-}
diff --git a/mdk-stage1/ppp/etc.ppp/chap-secrets b/mdk-stage1/ppp/etc.ppp/chap-secrets
deleted file mode 100644
index 7d1c3cd7c..000000000
--- a/mdk-stage1/ppp/etc.ppp/chap-secrets
+++ /dev/null
@@ -1,2 +0,0 @@
-# Secrets for authentication using CHAP
-# client server secret IP addresses
diff --git a/mdk-stage1/ppp/etc.ppp/options b/mdk-stage1/ppp/etc.ppp/options
deleted file mode 100644
index 0f77a9aa0..000000000
--- a/mdk-stage1/ppp/etc.ppp/options
+++ /dev/null
@@ -1,5 +0,0 @@
-lock
-noauth
-noipdefault
-usepeerdns
-
diff --git a/mdk-stage1/ppp/etc.ppp/options.options b/mdk-stage1/ppp/etc.ppp/options.options
deleted file mode 100644
index 4b67b6a0d..000000000
--- a/mdk-stage1/ppp/etc.ppp/options.options
+++ /dev/null
@@ -1 +0,0 @@
-lock
diff --git a/mdk-stage1/ppp/etc.ppp/pap-secrets b/mdk-stage1/ppp/etc.ppp/pap-secrets
deleted file mode 100644
index f8b7dce3c..000000000
--- a/mdk-stage1/ppp/etc.ppp/pap-secrets
+++ /dev/null
@@ -1,2 +0,0 @@
-# Secrets for authentication using PAP
-# client server secret IP addresses
diff --git a/mdk-stage1/ppp/include/linux/if_ppp.h b/mdk-stage1/ppp/include/linux/if_ppp.h
deleted file mode 100644
index 1febf0931..000000000
--- a/mdk-stage1/ppp/include/linux/if_ppp.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* $Id$ */
-
-/*
- * if_ppp.h - Point-to-Point Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- */
-
-/*
- * ==FILEVERSION 20000724==
- *
- * NOTE TO MAINTAINERS:
- * If you modify this file at all, please set the above date.
- * if_ppp.h is shipped with a PPP distribution as well as with the kernel;
- * if everyone increases the FILEVERSION number above, then scripts
- * can do the right thing when deciding whether to install a new if_ppp.h
- * file. Don't change the format of that line otherwise, so the
- * installation script can recognize it.
- */
-
-#ifndef _IF_PPP_H_
-#define _IF_PPP_H_
-
-/*
- * Packet sizes
- */
-
-#define PPP_MTU 1500 /* Default MTU (size of Info field) */
-#define PPP_MAXMRU 65000 /* Largest MRU we allow */
-#define PROTO_IPX 0x002b /* protocol numbers */
-#define PROTO_DNA_RT 0x0027 /* DNA Routing */
-
-
-/*
- * Bit definitions for flags.
- */
-
-#define SC_COMP_PROT 0x00000001 /* protocol compression (output) */
-#define SC_COMP_AC 0x00000002 /* header compression (output) */
-#define SC_COMP_TCP 0x00000004 /* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID 0x00000008 /* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC 0x00000010 /* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP 0x00000020 /* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN 0x00000040 /* Look at CCP packets */
-#define SC_CCP_UP 0x00000080 /* May send/recv compressed packets */
-#define SC_ENABLE_IP 0x00000100 /* IP packets may be exchanged */
-#define SC_LOOP_TRAFFIC 0x00000200 /* send traffic to pppd */
-#define SC_MULTILINK 0x00000400 /* do multilink encapsulation */
-#define SC_MP_SHORTSEQ 0x00000800 /* use short MP sequence numbers */
-#define SC_COMP_RUN 0x00001000 /* compressor has been inited */
-#define SC_DECOMP_RUN 0x00002000 /* decompressor has been inited */
-#define SC_MP_XSHORTSEQ 0x00004000 /* transmit short MP seq numbers */
-#define SC_DEBUG 0x00010000 /* enable debug messages */
-#define SC_LOG_INPKT 0x00020000 /* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT 0x00040000 /* log contents of pkts sent */
-#define SC_LOG_RAWIN 0x00080000 /* log all chars received */
-#define SC_LOG_FLUSH 0x00100000 /* log all chars flushed */
-#define SC_SYNC 0x00200000 /* synchronous serial mode */
-#define SC_MASK 0x0f200fff /* bits that user can change */
-
-/* state bits */
-#define SC_XMIT_BUSY 0x10000000 /* (used by isdn_ppp?) */
-#define SC_RCV_ODDP 0x08000000 /* have rcvd char with odd parity */
-#define SC_RCV_EVNP 0x04000000 /* have rcvd char with even parity */
-#define SC_RCV_B7_1 0x02000000 /* have rcvd char with bit 7 = 1 */
-#define SC_RCV_B7_0 0x01000000 /* have rcvd char with bit 7 = 0 */
-#define SC_DC_FERROR 0x00800000 /* fatal decomp error detected */
-#define SC_DC_ERROR 0x00400000 /* non-fatal decomp error detected */
-
-/*
- * Ioctl definitions.
- */
-
-struct npioctl {
- int protocol; /* PPP protocol, e.g. PPP_IP */
- enum NPmode mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
- __u8 *ptr;
- __u32 length;
- int transmit;
-};
-
-struct ifpppstatsreq {
- struct ifreq b;
- struct ppp_stats stats; /* statistic information */
-};
-
-struct ifpppcstatsreq {
- struct ifreq b;
- struct ppp_comp_stats stats;
-};
-
-#define ifr__name b.ifr_ifrn.ifrn_name
-#define stats_ptr b.ifr_ifru.ifru_data
-
-/*
- * Ioctl definitions.
- */
-
-#define PPPIOCGFLAGS _IOR('t', 90, int) /* get configuration flags */
-#define PPPIOCSFLAGS _IOW('t', 89, int) /* set configuration flags */
-#define PPPIOCGASYNCMAP _IOR('t', 88, int) /* get async map */
-#define PPPIOCSASYNCMAP _IOW('t', 87, int) /* set async map */
-#define PPPIOCGUNIT _IOR('t', 86, int) /* get ppp unit number */
-#define PPPIOCGRASYNCMAP _IOR('t', 85, int) /* get receive async map */
-#define PPPIOCSRASYNCMAP _IOW('t', 84, int) /* set receive async map */
-#define PPPIOCGMRU _IOR('t', 83, int) /* get max receive unit */
-#define PPPIOCSMRU _IOW('t', 82, int) /* set max receive unit */
-#define PPPIOCSMAXCID _IOW('t', 81, int) /* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT _IO('t', 78) /* transfer PPP unit */
-#define PPPIOCSCOMPRESS _IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE _IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE _IOW('t', 75, struct npioctl) /* set NP mode */
-#define PPPIOCSPASS _IOW('t', 71, struct sock_fprog) /* set pass filter */
-#define PPPIOCSACTIVE _IOW('t', 70, struct sock_fprog) /* set active filt */
-#define PPPIOCGDEBUG _IOR('t', 65, int) /* Read debug level */
-#define PPPIOCSDEBUG _IOW('t', 64, int) /* Set debug level */
-#define PPPIOCGIDLE _IOR('t', 63, struct ppp_idle) /* get idle time */
-#define PPPIOCNEWUNIT _IOWR('t', 62, int) /* create new ppp unit */
-#define PPPIOCATTACH _IOW('t', 61, int) /* attach to ppp unit */
-#define PPPIOCDETACH _IOW('t', 60, int) /* detach from ppp unit/chan */
-#define PPPIOCSMRRU _IOW('t', 59, int) /* set multilink MRU */
-#define PPPIOCCONNECT _IOW('t', 58, int) /* connect channel to unit */
-#define PPPIOCDISCONN _IO('t', 57) /* disconnect channel */
-#define PPPIOCATTCHAN _IOW('t', 56, int) /* attach to ppp channel */
-#define PPPIOCGCHAN _IOR('t', 55, int) /* get ppp channel number */
-
-#define SIOCGPPPSTATS (SIOCDEVPRIVATE + 0)
-#define SIOCGPPPVER (SIOCDEVPRIVATE + 1) /* NEVER change this!! */
-#define SIOCGPPPCSTATS (SIOCDEVPRIVATE + 2)
-
-#if !defined(ifr_mtu)
-#define ifr_mtu ifr_ifru.ifru_metric
-#endif
-
-#endif /* _IF_PPP_H_ */
diff --git a/mdk-stage1/ppp/include/linux/if_pppvar.h b/mdk-stage1/ppp/include/linux/if_pppvar.h
deleted file mode 100644
index b2485cd9d..000000000
--- a/mdk-stage1/ppp/include/linux/if_pppvar.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/* From: if_pppvar.h,v 1.2 1995/06/12 11:36:51 paulus Exp */
-/*
- * if_pppvar.h - private structures and declarations for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
- * ==FILEVERSION 990911==
- *
- * NOTE TO MAINTAINERS:
- * If you modify this file at all, please set the above date.
- * if_pppvar.h is shipped with a PPP distribution as well as with the kernel;
- * if everyone increases the FILEVERSION number above, then scripts
- * can do the right thing when deciding whether to install a new if_pppvar.h
- * file. Don't change the format of that line otherwise, so the
- * installation script can recognize it.
- */
-
-/*
- * Supported network protocols. These values are used for
- * indexing sc_npmode.
- */
-
-#define NP_IP 0 /* Internet Protocol */
-#define NP_IPX 1 /* IPX protocol */
-#define NP_AT 2 /* Appletalk protocol */
-#define NP_IPV6 3 /* Internet Protocol */
-#define NUM_NP 4 /* Number of NPs. */
-
-#define OBUFSIZE 256 /* # chars of output buffering */
-
-/*
- * Structure describing each ppp unit.
- */
-
-struct ppp {
- int magic; /* magic value for structure */
- struct ppp *next; /* unit with next index */
- unsigned long inuse; /* are we allocated? */
- int line; /* network interface unit # */
- __u32 flags; /* miscellaneous control flags */
- int mtu; /* maximum xmit frame size */
- int mru; /* maximum receive frame size */
- struct slcompress *slcomp; /* for TCP header compression */
- struct sk_buff_head xmt_q; /* frames to send from pppd */
- struct sk_buff_head rcv_q; /* frames for pppd to read */
- unsigned long xmit_busy; /* bit 0 set when xmitter busy */
-
- /* Information specific to using ppp on async serial lines. */
- struct tty_struct *tty; /* ptr to TTY structure */
- struct tty_struct *backup_tty; /* TTY to use if tty gets closed */
- __u8 escape; /* 0x20 if prev char was PPP_ESC */
- __u8 toss; /* toss this frame */
- volatile __u8 tty_pushing; /* internal state flag */
- volatile __u8 woke_up; /* internal state flag */
- __u32 xmit_async_map[8]; /* 1 bit means that given control
- character is quoted on output*/
- __u32 recv_async_map; /* 1 bit means that given control
- character is ignored on input*/
- __u32 bytes_sent; /* Bytes sent on frame */
- __u32 bytes_rcvd; /* Bytes recvd on frame */
-
- /* Async transmission information */
- struct sk_buff *tpkt; /* frame currently being sent */
- int tpkt_pos; /* how much of it we've done */
- __u16 tfcs; /* FCS so far for it */
- unsigned char *optr; /* where we're up to in sending */
- unsigned char *olim; /* points past last valid char */
-
- /* Async reception information */
- struct sk_buff *rpkt; /* frame currently being rcvd */
- __u16 rfcs; /* FCS so far of rpkt */
-
- /* Queues for select() functionality */
- struct wait_queue *read_wait; /* queue for reading processes */
-
- /* info for detecting idle channels */
- unsigned long last_xmit; /* time of last transmission */
- unsigned long last_recv; /* time last packet received */
-
- /* Statistic information */
- struct pppstat stats; /* statistic information */
-
- /* PPP compression protocol information */
- struct compressor *sc_xcomp; /* transmit compressor */
- void *sc_xc_state; /* transmit compressor state */
- struct compressor *sc_rcomp; /* receive decompressor */
- void *sc_rc_state; /* receive decompressor state */
-
- enum NPmode sc_npmode[NUM_NP]; /* what to do with each NP */
- int sc_xfer; /* PID of reserved PPP table */
- char name[8]; /* space for unit name */
- struct device dev; /* net device structure */
- struct enet_statistics estats; /* more detailed stats */
-
- /* tty output buffer */
- unsigned char obuf[OBUFSIZE]; /* buffer for characters to send */
-};
-
-#define PPP_MAGIC 0x5002
-#define PPP_VERSION "2.3.11"
diff --git a/mdk-stage1/ppp/include/linux/ppp-comp.h b/mdk-stage1/ppp/include/linux/ppp-comp.h
deleted file mode 100644
index 3184d0731..000000000
--- a/mdk-stage1/ppp/include/linux/ppp-comp.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * ==FILEVERSION 980319==
- *
- * NOTE TO MAINTAINERS:
- * If you modify this file at all, please set the above date.
- * ppp-comp.h is shipped with a PPP distribution as well as with the kernel;
- * if everyone increases the FILEVERSION number above, then scripts
- * can do the right thing when deciding whether to install a new ppp-comp.h
- * file. Don't change the format of that line otherwise, so the
- * installation script can recognize it.
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS 1 /* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE 1 /* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1 0
-#define DO_PREDICTOR_2 0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-
-struct compressor {
- int compress_proto; /* CCP compression protocol number */
-
- /* Allocate space for a compressor (transmit side) */
- void *(*comp_alloc) (unsigned char *options, int opt_len);
-
- /* Free space used by a compressor */
- void (*comp_free) (void *state);
-
- /* Initialize a compressor */
- int (*comp_init) (void *state, unsigned char *options,
- int opt_len, int unit, int opthdr, int debug);
-
- /* Reset a compressor */
- void (*comp_reset) (void *state);
-
- /* Compress a packet */
- int (*compress) (void *state, unsigned char *rptr,
- unsigned char *obuf, int isize, int osize);
-
- /* Return compression statistics */
- void (*comp_stat) (void *state, struct compstat *stats);
-
- /* Allocate space for a decompressor (receive side) */
- void *(*decomp_alloc) (unsigned char *options, int opt_len);
-
- /* Free space used by a decompressor */
- void (*decomp_free) (void *state);
-
- /* Initialize a decompressor */
- int (*decomp_init) (void *state, unsigned char *options,
- int opt_len, int unit, int opthdr, int mru,
- int debug);
-
- /* Reset a decompressor */
- void (*decomp_reset) (void *state);
-
- /* Decompress a packet. */
- int (*decompress) (void *state, unsigned char *ibuf, int isize,
- unsigned char *obuf, int osize);
-
- /* Update state for an incompressible packet received */
- void (*incomp) (void *state, unsigned char *ibuf, int icnt);
-
- /* Return decompression statistics */
- void (*decomp_stat) (void *state, struct compstat *stats);
-};
-
-/*
- * The return value from decompress routine is the length of the
- * decompressed packet if successful, otherwise DECOMP_ERROR
- * or DECOMP_FATALERROR if an error occurred.
- *
- * We need to make this distinction so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression. This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-
-#define DECOMP_ERROR -1 /* error detected before decomp. */
-#define DECOMP_FATALERROR -2 /* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-
-#define CCP_CONFREQ 1
-#define CCP_CONFACK 2
-#define CCP_TERMREQ 5
-#define CCP_TERMACK 6
-#define CCP_RESETREQ 14
-#define CCP_RESETACK 15
-
-/*
- * Max # bytes for a CCP option
- */
-
-#define CCP_MAX_OPTION_LENGTH 32
-
-/*
- * Parts of a CCP packet.
- */
-
-#define CCP_CODE(dp) ((dp)[0])
-#define CCP_ID(dp) ((dp)[1])
-#define CCP_LENGTH(dp) (((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN 4
-
-#define CCP_OPT_CODE(dp) ((dp)[0])
-#define CCP_OPT_LENGTH(dp) ((dp)[1])
-#define CCP_OPT_MINLEN 2
-
-/*
- * Definitions for BSD-Compress.
- */
-
-#define CI_BSD_COMPRESS 21 /* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS 3 /* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x) ((x) & 0x1F) /* number of bits requested */
-#define BSD_VERSION(x) ((x) >> 5) /* version of option format */
-#define BSD_CURRENT_VERSION 1 /* current version number */
-#define BSD_MAKE_OPT(v, n) (((v) << 5) | (n))
-
-#define BSD_MIN_BITS 9 /* smallest code size supported */
-#define BSD_MAX_BITS 15 /* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-
-#define CI_DEFLATE 26 /* config option for Deflate */
-#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */
-#define CILEN_DEFLATE 4 /* length of its config option */
-
-#define DEFLATE_MIN_SIZE 8
-#define DEFLATE_MAX_SIZE 15
-#define DEFLATE_METHOD_VAL 8
-#define DEFLATE_SIZE(x) (((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x) ((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w) ((((w) - DEFLATE_MIN_SIZE) << 4) \
- + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE 0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
-#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1 2 /* length of its config option */
-#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2 2 /* length of its config option */
-
-#ifdef __KERNEL__
-extern int ppp_register_compressor(struct compressor *);
-extern void ppp_unregister_compressor(struct compressor *);
-#endif /* __KERNEL__ */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/mdk-stage1/ppp/include/linux/ppp_defs.h b/mdk-stage1/ppp/include/linux/ppp_defs.h
deleted file mode 100644
index 46946fbdc..000000000
--- a/mdk-stage1/ppp/include/linux/ppp_defs.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/* $Id$ */
-
-/*
- * ppp_defs.h - PPP definitions.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-/*
- * ==FILEVERSION 20000114==
- *
- * NOTE TO MAINTAINERS:
- * If you modify this file at all, please set the above date.
- * ppp_defs.h is shipped with a PPP distribution as well as with the kernel;
- * if everyone increases the FILEVERSION number above, then scripts
- * can do the right thing when deciding whether to install a new ppp_defs.h
- * file. Don't change the format of that line otherwise, so the
- * installation script can recognize it.
- */
-
-#ifndef _PPP_DEFS_H_
-#define _PPP_DEFS_H_
-
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN 4 /* octets for standard ppp header */
-#define PPP_FCSLEN 2 /* octets for FCS */
-#define PPP_MRU 1500 /* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p) (((__u8 *)(p))[0])
-#define PPP_CONTROL(p) (((__u8 *)(p))[1])
-#define PPP_PROTOCOL(p) ((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */
-#define PPP_UI 0x03 /* Unnumbered Information */
-#define PPP_FLAG 0x7e /* Flag Sequence */
-#define PPP_ESCAPE 0x7d /* Asynchronous Control Escape */
-#define PPP_TRANS 0x20 /* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP 0x21 /* Internet Protocol */
-#define PPP_AT 0x29 /* AppleTalk Protocol */
-#define PPP_IPX 0x2b /* IPX protocol */
-#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */
-#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */
-#define PPP_MP 0x3d /* Multilink protocol */
-#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */
-#define PPP_COMPFRAG 0xfb /* fragment compressed below bundle */
-#define PPP_COMP 0xfd /* compressed packet */
-#define PPP_IPCP 0x8021 /* IP Control Protocol */
-#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */
-#define PPP_IPXCP 0x802b /* IPX Control Protocol */
-#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */
-#define PPP_CCPFRAG 0x80fb /* CCP at link level (below MP bundle) */
-#define PPP_CCP 0x80fd /* Compression Control Protocol */
-#define PPP_LCP 0xc021 /* Link Control Protocol */
-#define PPP_PAP 0xc023 /* Password Authentication Protocol */
-#define PPP_LQR 0xc025 /* Link Quality Report protocol */
-#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP 0xc029 /* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-
-#define PPP_INITFCS 0xffff /* Initial FCS value */
-#define PPP_GOODFCS 0xf0b8 /* Good final FCS value */
-#define PPP_FCS(fcs, c) (((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-
-typedef __u32 ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
- NPMODE_PASS, /* pass the packet through */
- NPMODE_DROP, /* silently drop the packet */
- NPMODE_ERROR, /* return an error */
- NPMODE_QUEUE /* save it up for later. */
-};
-
-/*
- * Statistics for LQRP and pppstats
- */
-struct pppstat {
- __u32 ppp_discards; /* # frames discarded */
-
- __u32 ppp_ibytes; /* bytes received */
- __u32 ppp_ioctects; /* bytes received not in error */
- __u32 ppp_ipackets; /* packets received */
- __u32 ppp_ierrors; /* receive errors */
- __u32 ppp_ilqrs; /* # LQR frames received */
-
- __u32 ppp_obytes; /* raw bytes sent */
- __u32 ppp_ooctects; /* frame bytes sent */
- __u32 ppp_opackets; /* packets sent */
- __u32 ppp_oerrors; /* transmit errors */
- __u32 ppp_olqrs; /* # LQR frames sent */
-};
-
-struct vjstat {
- __u32 vjs_packets; /* outbound packets */
- __u32 vjs_compressed; /* outbound compressed packets */
- __u32 vjs_searches; /* searches for connection state */
- __u32 vjs_misses; /* times couldn't find conn. state */
- __u32 vjs_uncompressedin; /* inbound uncompressed packets */
- __u32 vjs_compressedin; /* inbound compressed packets */
- __u32 vjs_errorin; /* inbound unknown type packets */
- __u32 vjs_tossed; /* inbound packets tossed because of error */
-};
-
-struct compstat {
- __u32 unc_bytes; /* total uncompressed bytes */
- __u32 unc_packets; /* total uncompressed packets */
- __u32 comp_bytes; /* compressed bytes */
- __u32 comp_packets; /* compressed packets */
- __u32 inc_bytes; /* incompressible bytes */
- __u32 inc_packets; /* incompressible packets */
-
- /* the compression ratio is defined as in_count / bytes_out */
- __u32 in_count; /* Bytes received */
- __u32 bytes_out; /* Bytes transmitted */
-
- double ratio; /* not computed in kernel. */
-};
-
-struct ppp_stats {
- struct pppstat p; /* basic PPP statistics */
- struct vjstat vj; /* VJ header compression statistics */
-};
-
-struct ppp_comp_stats {
- struct compstat c; /* packet compression statistics */
- struct compstat d; /* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
- time_t xmit_idle; /* time since last NP packet sent */
- time_t recv_idle; /* time since last NP packet received */
-};
-
-#ifndef __P
-#ifdef __STDC__
-#define __P(x) x
-#else
-#define __P(x) ()
-#endif
-#endif
-
-#endif /* _PPP_DEFS_H_ */
diff --git a/mdk-stage1/ppp/include/net/if_ppp.h b/mdk-stage1/ppp/include/net/if_ppp.h
deleted file mode 100644
index 1527ecf3f..000000000
--- a/mdk-stage1/ppp/include/net/if_ppp.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* $Id$ */
-
-/*
- * if_ppp.h - Point-to-Point Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _IF_PPP_H_
-#define _IF_PPP_H_
-
-/*
- * Bit definitions for flags.
- */
-#define SC_COMP_PROT 0x00000001 /* protocol compression (output) */
-#define SC_COMP_AC 0x00000002 /* header compression (output) */
-#define SC_COMP_TCP 0x00000004 /* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID 0x00000008 /* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC 0x00000010 /* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP 0x00000020 /* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN 0x00000040 /* Look at CCP packets */
-#define SC_CCP_UP 0x00000080 /* May send/recv compressed packets */
-#define SC_DEBUG 0x00010000 /* enable debug messages */
-#define SC_LOG_INPKT 0x00020000 /* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT 0x00040000 /* log contents of pkts sent */
-#define SC_LOG_RAWIN 0x00080000 /* log all chars received */
-#define SC_LOG_FLUSH 0x00100000 /* log all chars flushed */
-#define SC_RCV_B7_0 0x01000000 /* have rcvd char with bit 7 = 0 */
-#define SC_RCV_B7_1 0x02000000 /* have rcvd char with bit 7 = 1 */
-#define SC_RCV_EVNP 0x04000000 /* have rcvd char with even parity */
-#define SC_RCV_ODDP 0x08000000 /* have rcvd char with odd parity */
-#define SC_SYNC 0x00200000 /* use synchronous HDLC framing */
-#define SC_MASK 0x0fff00ff /* bits that user can change */
-
-/*
- * State bits in sc_flags, not changeable by user.
- */
-#define SC_TIMEOUT 0x00000400 /* timeout is currently pending */
-#define SC_VJ_RESET 0x00000800 /* need to reset VJ decomp */
-#define SC_COMP_RUN 0x00001000 /* compressor has been inited */
-#define SC_DECOMP_RUN 0x00002000 /* decompressor has been inited */
-#define SC_DC_ERROR 0x00004000 /* non-fatal decomp error detected */
-#define SC_DC_FERROR 0x00008000 /* fatal decomp error detected */
-#define SC_TBUSY 0x10000000 /* xmitter doesn't need a packet yet */
-#define SC_PKTLOST 0x20000000 /* have lost or dropped a packet */
-#define SC_FLUSH 0x40000000 /* flush input until next PPP_FLAG */
-#define SC_ESCAPED 0x80000000 /* saw a PPP_ESCAPE */
-
-/*
- * Ioctl definitions.
- */
-
-struct npioctl {
- int protocol; /* PPP procotol, e.g. PPP_IP */
- enum NPmode mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
- u_char *ptr;
- u_int length;
- int transmit;
-};
-
-struct ifpppstatsreq {
- char ifr_name[IFNAMSIZ];
- struct ppp_stats stats;
-};
-
-struct ifpppcstatsreq {
- char ifr_name[IFNAMSIZ];
- struct ppp_comp_stats stats;
-};
-
-/*
- * Ioctl definitions.
- */
-
-#define PPPIOCGFLAGS _IOR('t', 90, int) /* get configuration flags */
-#define PPPIOCSFLAGS _IOW('t', 89, int) /* set configuration flags */
-#define PPPIOCGASYNCMAP _IOR('t', 88, int) /* get async map */
-#define PPPIOCSASYNCMAP _IOW('t', 87, int) /* set async map */
-#define PPPIOCGUNIT _IOR('t', 86, int) /* get ppp unit number */
-#define PPPIOCGRASYNCMAP _IOR('t', 85, int) /* get receive async map */
-#define PPPIOCSRASYNCMAP _IOW('t', 84, int) /* set receive async map */
-#define PPPIOCGMRU _IOR('t', 83, int) /* get max receive unit */
-#define PPPIOCSMRU _IOW('t', 82, int) /* set max receive unit */
-#define PPPIOCSMAXCID _IOW('t', 81, int) /* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT _IO('t', 78) /* transfer PPP unit */
-#define PPPIOCSCOMPRESS _IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE _IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE _IOW('t', 75, struct npioctl) /* set NP mode */
-#define PPPIOCGIDLE _IOR('t', 74, struct ppp_idle) /* get idle time */
-#ifdef PPP_FILTER
-#define PPPIOCSPASS _IOW('t', 71, struct bpf_program) /* set pass filter */
-#define PPPIOCSACTIVE _IOW('t', 70, struct bpf_program) /* set active filt */
-#endif /* PPP_FILTER */
-
-/* PPPIOC[GS]MTU are alternatives to SIOC[GS]IFMTU, used under Ultrix */
-#define PPPIOCGMTU _IOR('t', 73, int) /* get interface MTU */
-#define PPPIOCSMTU _IOW('t', 72, int) /* set interface MTU */
-
-/*
- * These two are interface ioctls so that pppstats can do them on
- * a socket without having to open the serial device.
- */
-#define SIOCGPPPSTATS _IOWR('i', 123, struct ifpppstatsreq)
-#define SIOCGPPPCSTATS _IOWR('i', 122, struct ifpppcstatsreq)
-
-#if !defined(ifr_mtu)
-#define ifr_mtu ifr_ifru.ifru_metric
-#endif
-
-#if (defined(_KERNEL) || defined(KERNEL)) && !defined(NeXT)
-void pppattach __P((void));
-void pppintr __P((void));
-#endif
-#endif /* _IF_PPP_H_ */
diff --git a/mdk-stage1/ppp/include/net/ppp-comp.h b/mdk-stage1/ppp/include/net/ppp-comp.h
deleted file mode 100644
index 0e6a9c672..000000000
--- a/mdk-stage1/ppp/include/net/ppp-comp.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS 1 /* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE 1 /* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1 0
-#define DO_PREDICTOR_2 0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-#ifdef PACKETPTR
-struct compressor {
- int compress_proto; /* CCP compression protocol number */
-
- /* Allocate space for a compressor (transmit side) */
- void *(*comp_alloc) __P((u_char *options, int opt_len));
- /* Free space used by a compressor */
- void (*comp_free) __P((void *state));
- /* Initialize a compressor */
- int (*comp_init) __P((void *state, u_char *options, int opt_len,
- int unit, int hdrlen, int debug));
- /* Reset a compressor */
- void (*comp_reset) __P((void *state));
- /* Compress a packet */
- int (*compress) __P((void *state, PACKETPTR *mret,
- PACKETPTR mp, int orig_len, int max_len));
- /* Return compression statistics */
- void (*comp_stat) __P((void *state, struct compstat *stats));
-
- /* Allocate space for a decompressor (receive side) */
- void *(*decomp_alloc) __P((u_char *options, int opt_len));
- /* Free space used by a decompressor */
- void (*decomp_free) __P((void *state));
- /* Initialize a decompressor */
- int (*decomp_init) __P((void *state, u_char *options, int opt_len,
- int unit, int hdrlen, int mru, int debug));
- /* Reset a decompressor */
- void (*decomp_reset) __P((void *state));
- /* Decompress a packet. */
- int (*decompress) __P((void *state, PACKETPTR mp,
- PACKETPTR *dmpp));
- /* Update state for an incompressible packet received */
- void (*incomp) __P((void *state, PACKETPTR mp));
- /* Return decompression statistics */
- void (*decomp_stat) __P((void *state, struct compstat *stats));
-};
-#endif /* PACKETPTR */
-
-/*
- * Return values for decompress routine.
- * We need to make these distinctions so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression. This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-#define DECOMP_OK 0 /* everything went OK */
-#define DECOMP_ERROR 1 /* error detected before decomp. */
-#define DECOMP_FATALERROR 2 /* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-#define CCP_CONFREQ 1
-#define CCP_CONFACK 2
-#define CCP_TERMREQ 5
-#define CCP_TERMACK 6
-#define CCP_RESETREQ 14
-#define CCP_RESETACK 15
-
-/*
- * Max # bytes for a CCP option
- */
-#define CCP_MAX_OPTION_LENGTH 32
-
-/*
- * Parts of a CCP packet.
- */
-#define CCP_CODE(dp) ((dp)[0])
-#define CCP_ID(dp) ((dp)[1])
-#define CCP_LENGTH(dp) (((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN 4
-
-#define CCP_OPT_CODE(dp) ((dp)[0])
-#define CCP_OPT_LENGTH(dp) ((dp)[1])
-#define CCP_OPT_MINLEN 2
-
-/*
- * Definitions for BSD-Compress.
- */
-#define CI_BSD_COMPRESS 21 /* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS 3 /* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x) ((x) & 0x1F) /* number of bits requested */
-#define BSD_VERSION(x) ((x) >> 5) /* version of option format */
-#define BSD_CURRENT_VERSION 1 /* current version number */
-#define BSD_MAKE_OPT(v, n) (((v) << 5) | (n))
-
-#define BSD_MIN_BITS 9 /* smallest code size supported */
-#define BSD_MAX_BITS 15 /* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-#define CI_DEFLATE 26 /* config option for Deflate */
-#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */
-#define CILEN_DEFLATE 4 /* length of its config option */
-
-#define DEFLATE_MIN_SIZE 8
-#define DEFLATE_MAX_SIZE 15
-#define DEFLATE_METHOD_VAL 8
-#define DEFLATE_SIZE(x) (((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x) ((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w) ((((w) - DEFLATE_MIN_SIZE) << 4) \
- + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE 0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1 2 /* length of its config option */
-#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2 2 /* length of its config option */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/mdk-stage1/ppp/include/net/ppp_defs.h b/mdk-stage1/ppp/include/net/ppp_defs.h
deleted file mode 100644
index c35020eab..000000000
--- a/mdk-stage1/ppp/include/net/ppp_defs.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* $Id$ */
-
-/*
- * ppp_defs.h - PPP definitions.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#ifndef _PPP_DEFS_H_
-#define _PPP_DEFS_H_
-
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN 4 /* octets for standard ppp header */
-#define PPP_FCSLEN 2 /* octets for FCS */
-
-/*
- * Packet sizes
- *
- * Note - lcp shouldn't be allowed to negotiate stuff outside these
- * limits. See lcp.h in the pppd directory.
- * (XXX - these constants should simply be shared by lcp.c instead
- * of living in lcp.h)
- */
-#define PPP_MTU 1500 /* Default MTU (size of Info field) */
-#define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN)
-#define PPP_MINMTU 64
-#define PPP_MRU 1500 /* default MRU = max length of info field */
-#define PPP_MAXMRU 65000 /* Largest MRU we allow */
-#define PPP_MINMRU 128
-
-#define PPP_ADDRESS(p) (((u_char *)(p))[0])
-#define PPP_CONTROL(p) (((u_char *)(p))[1])
-#define PPP_PROTOCOL(p) ((((u_char *)(p))[2] << 8) + ((u_char *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define PPP_ALLSTATIONS 0xff /* All-Stations broadcast address */
-#define PPP_UI 0x03 /* Unnumbered Information */
-#define PPP_FLAG 0x7e /* Flag Sequence */
-#define PPP_ESCAPE 0x7d /* Asynchronous Control Escape */
-#define PPP_TRANS 0x20 /* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP 0x21 /* Internet Protocol */
-#define PPP_AT 0x29 /* AppleTalk Protocol */
-#define PPP_IPX 0x2b /* IPX protocol */
-#define PPP_VJC_COMP 0x2d /* VJ compressed TCP */
-#define PPP_VJC_UNCOMP 0x2f /* VJ uncompressed TCP */
-#define PPP_IPV6 0x57 /* Internet Protocol Version 6 */
-#define PPP_COMP 0xfd /* compressed packet */
-#define PPP_IPCP 0x8021 /* IP Control Protocol */
-#define PPP_ATCP 0x8029 /* AppleTalk Control Protocol */
-#define PPP_IPXCP 0x802b /* IPX Control Protocol */
-#define PPP_IPV6CP 0x8057 /* IPv6 Control Protocol */
-#define PPP_CCP 0x80fd /* Compression Control Protocol */
-#define PPP_LCP 0xc021 /* Link Control Protocol */
-#define PPP_PAP 0xc023 /* Password Authentication Protocol */
-#define PPP_LQR 0xc025 /* Link Quality Report protocol */
-#define PPP_CHAP 0xc223 /* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP 0xc029 /* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-#define PPP_INITFCS 0xffff /* Initial FCS value */
-#define PPP_GOODFCS 0xf0b8 /* Good final FCS value */
-#define PPP_FCS(fcs, c) (((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-/*
- * A 32-bit unsigned integral type.
- */
-
-#if !defined(__BIT_TYPES_DEFINED__) && !defined(_BITYPES) \
- && !defined(__FreeBSD__) && (NS_TARGET < 40)
-#ifdef UINT32_T
-typedef UINT32_T u_int32_t;
-#else
-typedef unsigned int u_int32_t;
-typedef unsigned short u_int16_t;
-#endif
-#endif
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-typedef u_int32_t ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
- NPMODE_PASS, /* pass the packet through */
- NPMODE_DROP, /* silently drop the packet */
- NPMODE_ERROR, /* return an error */
- NPMODE_QUEUE /* save it up for later. */
-};
-
-/*
- * Statistics.
- */
-struct pppstat {
- unsigned int ppp_ibytes; /* bytes received */
- unsigned int ppp_ipackets; /* packets received */
- unsigned int ppp_ierrors; /* receive errors */
- unsigned int ppp_obytes; /* bytes sent */
- unsigned int ppp_opackets; /* packets sent */
- unsigned int ppp_oerrors; /* transmit errors */
-};
-
-struct vjstat {
- unsigned int vjs_packets; /* outbound packets */
- unsigned int vjs_compressed; /* outbound compressed packets */
- unsigned int vjs_searches; /* searches for connection state */
- unsigned int vjs_misses; /* times couldn't find conn. state */
- unsigned int vjs_uncompressedin; /* inbound uncompressed packets */
- unsigned int vjs_compressedin; /* inbound compressed packets */
- unsigned int vjs_errorin; /* inbound unknown type packets */
- unsigned int vjs_tossed; /* inbound packets tossed because of error */
-};
-
-struct ppp_stats {
- struct pppstat p; /* basic PPP statistics */
- struct vjstat vj; /* VJ header compression statistics */
-};
-
-struct compstat {
- unsigned int unc_bytes; /* total uncompressed bytes */
- unsigned int unc_packets; /* total uncompressed packets */
- unsigned int comp_bytes; /* compressed bytes */
- unsigned int comp_packets; /* compressed packets */
- unsigned int inc_bytes; /* incompressible bytes */
- unsigned int inc_packets; /* incompressible packets */
- unsigned int ratio; /* recent compression ratio << 8 */
-};
-
-struct ppp_comp_stats {
- struct compstat c; /* packet compression statistics */
- struct compstat d; /* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
- time_t xmit_idle; /* time since last NP packet sent */
- time_t recv_idle; /* time since last NP packet received */
-};
-
-#ifndef __P
-#ifdef __STDC__
-#define __P(x) x
-#else
-#define __P(x) ()
-#endif
-#endif
-
-#endif /* _PPP_DEFS_H_ */
diff --git a/mdk-stage1/ppp/include/net/pppio.h b/mdk-stage1/ppp/include/net/pppio.h
deleted file mode 100644
index 9db1ca9ab..000000000
--- a/mdk-stage1/ppp/include/net/pppio.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * pppio.h - ioctl and other misc. definitions for STREAMS modules.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#define _PPPIO(n) (('p' << 8) + (n))
-
-#define PPPIO_NEWPPA _PPPIO(130) /* allocate a new PPP unit */
-#define PPPIO_GETSTAT _PPPIO(131) /* get PPP statistics */
-#define PPPIO_GETCSTAT _PPPIO(132) /* get PPP compression stats */
-#define PPPIO_MTU _PPPIO(133) /* set max transmission unit */
-#define PPPIO_MRU _PPPIO(134) /* set max receive unit */
-#define PPPIO_CFLAGS _PPPIO(135) /* set/clear/get compression flags */
-#define PPPIO_XCOMP _PPPIO(136) /* alloc transmit compressor */
-#define PPPIO_RCOMP _PPPIO(137) /* alloc receive decompressor */
-#define PPPIO_XACCM _PPPIO(138) /* set transmit asyncmap */
-#define PPPIO_RACCM _PPPIO(139) /* set receive asyncmap */
-#define PPPIO_VJINIT _PPPIO(140) /* initialize VJ comp/decomp */
-#define PPPIO_ATTACH _PPPIO(141) /* attach to a ppa (without putmsg) */
-#define PPPIO_LASTMOD _PPPIO(142) /* mark last ppp module */
-#define PPPIO_GCLEAN _PPPIO(143) /* get 8-bit-clean flags */
-#define PPPIO_DEBUG _PPPIO(144) /* request debug information */
-#define PPPIO_BIND _PPPIO(145) /* bind to SAP */
-#define PPPIO_NPMODE _PPPIO(146) /* set mode for handling data pkts */
-#define PPPIO_GIDLE _PPPIO(147) /* get time since last data pkt */
-#define PPPIO_PASSFILT _PPPIO(148) /* set filter for packets to pass */
-#define PPPIO_ACTIVEFILT _PPPIO(149) /* set filter for "link active" pkts */
-
-/*
- * Values for PPPIO_CFLAGS
- */
-#define COMP_AC 0x1 /* compress address/control */
-#define DECOMP_AC 0x2 /* decompress address/control */
-#define COMP_PROT 0x4 /* compress PPP protocol */
-#define DECOMP_PROT 0x8 /* decompress PPP protocol */
-
-#define COMP_VJC 0x10 /* compress TCP/IP headers */
-#define COMP_VJCCID 0x20 /* compress connection ID as well */
-#define DECOMP_VJC 0x40 /* decompress TCP/IP headers */
-#define DECOMP_VJCCID 0x80 /* accept compressed connection ID */
-
-#define CCP_ISOPEN 0x100 /* look at CCP packets */
-#define CCP_ISUP 0x200 /* do packet comp/decomp */
-#define CCP_ERROR 0x400 /* (status) error in packet decomp */
-#define CCP_FATALERROR 0x800 /* (status) fatal error ditto */
-#define CCP_COMP_RUN 0x1000 /* (status) seen CCP ack sent */
-#define CCP_DECOMP_RUN 0x2000 /* (status) seen CCP ack rcvd */
-
-/*
- * Values for 8-bit-clean flags.
- */
-#define RCV_B7_0 1 /* have rcvd char with bit 7 = 0 */
-#define RCV_B7_1 2 /* have rcvd char with bit 7 = 1 */
-#define RCV_EVNP 4 /* have rcvd char with even parity */
-#define RCV_ODDP 8 /* have rcvd char with odd parity */
-
-/*
- * Values for the first byte of M_CTL messages passed between
- * PPP modules.
- */
-#define PPPCTL_OERROR 0xe0 /* output error [up] */
-#define PPPCTL_IERROR 0xe1 /* input error (e.g. FCS) [up] */
-#define PPPCTL_MTU 0xe2 /* set MTU [down] */
-#define PPPCTL_MRU 0xe3 /* set MRU [down] */
-#define PPPCTL_UNIT 0xe4 /* note PPP unit number [down] */
-
-/*
- * Values for the integer argument to PPPIO_DEBUG.
- */
-#define PPPDBG_DUMP 0x10000 /* print out debug info now */
-#define PPPDBG_LOG 0x100 /* log various things */
-#define PPPDBG_DRIVER 0 /* identifies ppp driver as target */
-#define PPPDBG_IF 1 /* identifies ppp network i/f target */
-#define PPPDBG_COMP 2 /* identifies ppp compression target */
-#define PPPDBG_AHDLC 3 /* identifies ppp async hdlc target */
diff --git a/mdk-stage1/ppp/include/net/slcompress.h b/mdk-stage1/ppp/include/net/slcompress.h
deleted file mode 100644
index 9e19bc0ed..000000000
--- a/mdk-stage1/ppp/include/net/slcompress.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Definitions for tcp compression routines.
- *
- * $Id$
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- * - Initial distribution.
- */
-
-#ifndef _SLCOMPRESS_H_
-#define _SLCOMPRESS_H_
-
-#define MAX_STATES 16 /* must be > 2 and < 256 */
-#define MAX_HDR MLEN /* XXX 4bsd-ism: should really be 128 */
-
-/*
- * Compressed packet format:
- *
- * The first octet contains the packet type (top 3 bits), TCP
- * 'push' bit, and flags that indicate which of the 4 TCP sequence
- * numbers have changed (bottom 5 bits). The next octet is a
- * conversation number that associates a saved IP/TCP header with
- * the compressed packet. The next two octets are the TCP checksum
- * from the original datagram. The next 0 to 15 octets are
- * sequence number changes, one change per bit set in the header
- * (there may be no changes and there are two special cases where
- * the receiver implicitly knows what changed -- see below).
- *
- * There are 5 numbers which can change (they are always inserted
- * in the following order): TCP urgent pointer, window,
- * acknowlegement, sequence number and IP ID. (The urgent pointer
- * is different from the others in that its value is sent, not the
- * change in value.) Since typical use of SLIP links is biased
- * toward small packets (see comments on MTU/MSS below), changes
- * use a variable length coding with one octet for numbers in the
- * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the
- * range 256 - 65535 or 0. (If the change in sequence number or
- * ack is more than 65535, an uncompressed packet is sent.)
- */
-
-/*
- * Packet types (must not conflict with IP protocol version)
- *
- * The top nibble of the first octet is the packet type. There are
- * three possible types: IP (not proto TCP or tcp with one of the
- * control flags set); uncompressed TCP (a normal IP/TCP packet but
- * with the 8-bit protocol field replaced by an 8-bit connection id --
- * this type of packet syncs the sender & receiver); and compressed
- * TCP (described above).
- *
- * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and
- * is logically part of the 4-bit "changes" field that follows. Top
- * three bits are actual packet type. For backward compatibility
- * and in the interest of conserving bits, numbers are chosen so the
- * IP protocol version number (4) which normally appears in this nibble
- * means "IP packet".
- */
-
-/* packet types */
-#define TYPE_IP 0x40
-#define TYPE_UNCOMPRESSED_TCP 0x70
-#define TYPE_COMPRESSED_TCP 0x80
-#define TYPE_ERROR 0x00
-
-/* Bits in first octet of compressed packet */
-#define NEW_C 0x40 /* flag bits for what changed in a packet */
-#define NEW_I 0x20
-#define NEW_S 0x08
-#define NEW_A 0x04
-#define NEW_W 0x02
-#define NEW_U 0x01
-
-/* reserved, special-case values of above */
-#define SPECIAL_I (NEW_S|NEW_W|NEW_U) /* echoed interactive traffic */
-#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U) /* unidirectional data */
-#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)
-
-#define TCP_PUSH_BIT 0x10
-
-
-/*
- * "state" data for each active tcp conversation on the wire. This is
- * basically a copy of the entire IP/TCP header from the last packet
- * we saw from the conversation together with a small identifier
- * the transmit & receive ends of the line use to locate saved header.
- */
-struct cstate {
- struct cstate *cs_next; /* next most recently used cstate (xmit only) */
- u_short cs_hlen; /* size of hdr (receive only) */
- u_char cs_id; /* connection # associated with this state */
- u_char cs_filler;
- union {
- char csu_hdr[MAX_HDR];
- struct ip csu_ip; /* ip/tcp hdr from most recent packet */
- } slcs_u;
-};
-#define cs_ip slcs_u.csu_ip
-#define cs_hdr slcs_u.csu_hdr
-
-/*
- * all the state data for one serial line (we need one of these
- * per line).
- */
-struct slcompress {
- struct cstate *last_cs; /* most recently used tstate */
- u_char last_recv; /* last rcvd conn. id */
- u_char last_xmit; /* last sent conn. id */
- u_short flags;
-#ifndef SL_NO_STATS
- int sls_packets; /* outbound packets */
- int sls_compressed; /* outbound compressed packets */
- int sls_searches; /* searches for connection state */
- int sls_misses; /* times couldn't find conn. state */
- int sls_uncompressedin; /* inbound uncompressed packets */
- int sls_compressedin; /* inbound compressed packets */
- int sls_errorin; /* inbound unknown type packets */
- int sls_tossed; /* inbound packets tossed because of error */
-#endif
- struct cstate tstate[MAX_STATES]; /* xmit connection states */
- struct cstate rstate[MAX_STATES]; /* receive connection states */
-};
-/* flag values */
-#define SLF_TOSS 1 /* tossing rcvd frames because of input err */
-
-void sl_compress_init __P((struct slcompress *));
-void sl_compress_setup __P((struct slcompress *, int));
-u_int sl_compress_tcp __P((struct mbuf *,
- struct ip *, struct slcompress *, int));
-int sl_uncompress_tcp __P((u_char **, int, u_int, struct slcompress *));
-int sl_uncompress_tcp_core __P((u_char *, int, int, u_int,
- struct slcompress *, u_char **, u_int *));
-
-#endif /* _SLCOMPRESS_H_ */
diff --git a/mdk-stage1/ppp/include/net/vjcompress.h b/mdk-stage1/ppp/include/net/vjcompress.h
deleted file mode 100644
index c64596926..000000000
--- a/mdk-stage1/ppp/include/net/vjcompress.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Definitions for tcp compression routines.
- *
- * $Id$
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- * - Initial distribution.
- */
-
-#ifndef _VJCOMPRESS_H_
-#define _VJCOMPRESS_H_
-
-#define MAX_STATES 16 /* must be > 2 and < 256 */
-#define MAX_HDR 128
-
-/*
- * Compressed packet format:
- *
- * The first octet contains the packet type (top 3 bits), TCP
- * 'push' bit, and flags that indicate which of the 4 TCP sequence
- * numbers have changed (bottom 5 bits). The next octet is a
- * conversation number that associates a saved IP/TCP header with
- * the compressed packet. The next two octets are the TCP checksum
- * from the original datagram. The next 0 to 15 octets are
- * sequence number changes, one change per bit set in the header
- * (there may be no changes and there are two special cases where
- * the receiver implicitly knows what changed -- see below).
- *
- * There are 5 numbers which can change (they are always inserted
- * in the following order): TCP urgent pointer, window,
- * acknowlegement, sequence number and IP ID. (The urgent pointer
- * is different from the others in that its value is sent, not the
- * change in value.) Since typical use of SLIP links is biased
- * toward small packets (see comments on MTU/MSS below), changes
- * use a variable length coding with one octet for numbers in the
- * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the
- * range 256 - 65535 or 0. (If the change in sequence number or
- * ack is more than 65535, an uncompressed packet is sent.)
- */
-
-/*
- * Packet types (must not conflict with IP protocol version)
- *
- * The top nibble of the first octet is the packet type. There are
- * three possible types: IP (not proto TCP or tcp with one of the
- * control flags set); uncompressed TCP (a normal IP/TCP packet but
- * with the 8-bit protocol field replaced by an 8-bit connection id --
- * this type of packet syncs the sender & receiver); and compressed
- * TCP (described above).
- *
- * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and
- * is logically part of the 4-bit "changes" field that follows. Top
- * three bits are actual packet type. For backward compatibility
- * and in the interest of conserving bits, numbers are chosen so the
- * IP protocol version number (4) which normally appears in this nibble
- * means "IP packet".
- */
-
-/* packet types */
-#define TYPE_IP 0x40
-#define TYPE_UNCOMPRESSED_TCP 0x70
-#define TYPE_COMPRESSED_TCP 0x80
-#define TYPE_ERROR 0x00
-
-/* Bits in first octet of compressed packet */
-#define NEW_C 0x40 /* flag bits for what changed in a packet */
-#define NEW_I 0x20
-#define NEW_S 0x08
-#define NEW_A 0x04
-#define NEW_W 0x02
-#define NEW_U 0x01
-
-/* reserved, special-case values of above */
-#define SPECIAL_I (NEW_S|NEW_W|NEW_U) /* echoed interactive traffic */
-#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U) /* unidirectional data */
-#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)
-
-#define TCP_PUSH_BIT 0x10
-
-
-/*
- * "state" data for each active tcp conversation on the wire. This is
- * basically a copy of the entire IP/TCP header from the last packet
- * we saw from the conversation together with a small identifier
- * the transmit & receive ends of the line use to locate saved header.
- */
-struct cstate {
- struct cstate *cs_next; /* next most recently used state (xmit only) */
- u_short cs_hlen; /* size of hdr (receive only) */
- u_char cs_id; /* connection # associated with this state */
- u_char cs_filler;
- union {
- char csu_hdr[MAX_HDR];
- struct ip csu_ip; /* ip/tcp hdr from most recent packet */
- } vjcs_u;
-};
-#define cs_ip vjcs_u.csu_ip
-#define cs_hdr vjcs_u.csu_hdr
-
-/*
- * all the state data for one serial line (we need one of these per line).
- */
-struct vjcompress {
- struct cstate *last_cs; /* most recently used tstate */
- u_char last_recv; /* last rcvd conn. id */
- u_char last_xmit; /* last sent conn. id */
- u_short flags;
-#ifndef VJ_NO_STATS
- struct vjstat stats;
-#endif
- struct cstate tstate[MAX_STATES]; /* xmit connection states */
- struct cstate rstate[MAX_STATES]; /* receive connection states */
-};
-
-/* flag values */
-#define VJF_TOSS 1 /* tossing rcvd frames because of input err */
-
-extern void vj_compress_init __P((struct vjcompress *comp, int max_state));
-extern u_int vj_compress_tcp __P((struct ip *ip, u_int mlen,
- struct vjcompress *comp, int compress_cid_flag,
- u_char **vjhdrp));
-extern void vj_uncompress_err __P((struct vjcompress *comp));
-extern int vj_uncompress_uncomp __P((u_char *buf, int buflen,
- struct vjcompress *comp));
-extern int vj_uncompress_tcp __P((u_char *buf, int buflen, int total_len,
- struct vjcompress *comp, u_char **hdrp,
- u_int *hlenp));
-
-#endif /* _VJCOMPRESS_H_ */
diff --git a/mdk-stage1/ppp/include/pcap-int.h b/mdk-stage1/ppp/include/pcap-int.h
deleted file mode 100644
index 323994929..000000000
--- a/mdk-stage1/ppp/include/pcap-int.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (c) 1994, 1995, 1996
- * The Regents of the University of California. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by the Computer Systems
- * Engineering Group at Lawrence Berkeley Laboratory.
- * 4. Neither the name of the University nor of the Laboratory may be used
- * to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header$ (LBL)
- */
-
-#ifndef pcap_int_h
-#define pcap_int_h
-
-#include <pcap.h>
-
-/*
- * Savefile
- */
-struct pcap_sf {
- FILE *rfile;
- int swapped;
- int version_major;
- int version_minor;
- u_char *base;
-};
-
-struct pcap_md {
- struct pcap_stat stat;
- /*XXX*/
- int use_bpf;
- u_long TotPkts; /* can't oflow for 79 hrs on ether */
- u_long TotAccepted; /* count accepted by filter */
- u_long TotDrops; /* count of dropped packets */
- long TotMissed; /* missed by i/f during this run */
- long OrigMissed; /* missed by i/f before this run */
-#ifdef linux
- int pad;
- int skip;
- char *device;
-#endif
-};
-
-struct pcap {
- int fd;
- int snapshot;
- int linktype;
- int tzoff; /* timezone offset */
- int offset; /* offset for proper alignment */
-
- struct pcap_sf sf;
- struct pcap_md md;
-
- /*
- * Read buffer.
- */
- int bufsize;
- u_char *buffer;
- u_char *bp;
- int cc;
-
- /*
- * Place holder for pcap_next().
- */
- u_char *pkt;
-
-
- /*
- * Placeholder for filter code if bpf not in kernel.
- */
- struct bpf_program fcode;
-
- char errbuf[PCAP_ERRBUF_SIZE];
-};
-
-int yylex(void);
-
-#ifndef min
-#define min(a, b) ((a) > (b) ? (b) : (a))
-#endif
-
-/* XXX should these be in pcap.h? */
-int pcap_offline_read(pcap_t *, int, pcap_handler, u_char *);
-int pcap_read(pcap_t *, int cnt, pcap_handler, u_char *);
-
-/* Ultrix pads to make everything line up on a nice boundary */
-#if defined(ultrix) || defined(__alpha)
-#define PCAP_FDDIPAD 3
-#endif
-
-/* XXX */
-extern int pcap_fddipad;
-#endif
diff --git a/mdk-stage1/ppp/linux/Makefile.top b/mdk-stage1/ppp/linux/Makefile.top
deleted file mode 100644
index fa34ce59f..000000000
--- a/mdk-stage1/ppp/linux/Makefile.top
+++ /dev/null
@@ -1,55 +0,0 @@
-# PPP top-level Makefile for Linux.
-
-
-BINDIR = $(DESTDIR)/usr/sbin
-MANDIR = $(DESTDIR)/usr/man
-ETCDIR = $(DESTDIR)/etc/ppp
-
-# uid 0 = root
-INSTALL= install
-
-all:
- cd chat; $(MAKE) $(MFLAGS) all
- cd pppd; $(MAKE) $(MFLAGS) all
- cd pppstats; $(MAKE) $(MFLAGS) all
- cd pppdump; $(MAKE) $(MFLAGS) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
- cd chat; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
- cd pppd; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
- cd pppstats; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
- cd pppdump; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
- $(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
- $(INSTALL) -c -m 644 etc.ppp/options $@
-$(ETCDIR)/pap-secrets:
- $(INSTALL) -c -m 600 etc.ppp/pap-secrets $@
-$(ETCDIR)/chap-secrets:
- $(INSTALL) -c -m 600 etc.ppp/chap-secrets $@
-
-$(BINDIR):
- $(INSTALL) -d -m 755 $@
-$(MANDIR)/man8:
- $(INSTALL) -d -m 755 $@
-$(ETCDIR):
- $(INSTALL) -d -m 755 $@
-
-clean:
- rm -f `find . -name '*.[oas]' -print`
- rm -f `find . -name 'core' -print`
- rm -f `find . -name '*~' -print`
- cd chat; $(MAKE) clean
- cd pppd; $(MAKE) clean
- cd pppstats; $(MAKE) clean
- cd pppdump; $(MAKE) clean
-
-dist-clean: clean
- rm -f Makefile `find . -name Makefile -print`
-
-#kernel:
-# cd linux; ./kinstall.sh
diff --git a/mdk-stage1/ppp/modules/bsd-comp.c b/mdk-stage1/ppp/modules/bsd-comp.c
deleted file mode 100644
index b1b9325c7..000000000
--- a/mdk-stage1/ppp/modules/bsd-comp.c
+++ /dev/null
@@ -1,1116 +0,0 @@
-/* Because this code is derived from the 4.3BSD compress source:
- *
- *
- * Copyright (c) 1985, 1986 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * James A. Woods, derived from original work by Spencer Thomas
- * and Joseph Orost.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by the University of
- * California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * This version is for use with STREAMS under SunOS 4.x,
- * Digital UNIX, AIX 4.x, and SVR4 systems including Solaris 2.
- *
- * $Id$
- */
-
-#ifdef AIX4
-#include <net/net_globals.h>
-#endif
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/stream.h>
-#include <net/ppp_defs.h>
-#include "ppp_mod.h"
-
-#ifdef SVR4
-#include <sys/byteorder.h>
-#ifndef _BIG_ENDIAN
-#define BSD_LITTLE_ENDIAN
-#endif
-#endif
-
-#ifdef __osf__
-#undef FIRST
-#undef LAST
-#define BSD_LITTLE_ENDIAN
-#endif
-
-#define PACKETPTR mblk_t *
-#include <net/ppp-comp.h>
-
-#if DO_BSD_COMPRESS
-
-/*
- * PPP "BSD compress" compression
- * The differences between this compression and the classic BSD LZW
- * source are obvious from the requirement that the classic code worked
- * with files while this handles arbitrarily long streams that
- * are broken into packets. They are:
- *
- * When the code size expands, a block of junk is not emitted by
- * the compressor and not expected by the decompressor.
- *
- * New codes are not necessarily assigned every time an old
- * code is output by the compressor. This is because a packet
- * end forces a code to be emitted, but does not imply that a
- * new sequence has been seen.
- *
- * The compression ratio is checked at the first end of a packet
- * after the appropriate gap. Besides simplifying and speeding
- * things up, this makes it more likely that the transmitter
- * and receiver will agree when the dictionary is cleared when
- * compression is not going well.
- */
-
-/*
- * A dictionary for doing BSD compress.
- */
-struct bsd_db {
- int totlen; /* length of this structure */
- u_int hsize; /* size of the hash table */
- u_char hshift; /* used in hash function */
- u_char n_bits; /* current bits/code */
- u_char maxbits;
- u_char debug;
- u_char unit;
- u_short seqno; /* sequence number of next packet */
- u_int hdrlen; /* header length to preallocate */
- u_int mru;
- u_int maxmaxcode; /* largest valid code */
- u_int max_ent; /* largest code in use */
- u_int in_count; /* uncompressed bytes, aged */
- u_int bytes_out; /* compressed bytes, aged */
- u_int ratio; /* recent compression ratio */
- u_int checkpoint; /* when to next check the ratio */
- u_int clear_count; /* times dictionary cleared */
- u_int incomp_count; /* incompressible packets */
- u_int incomp_bytes; /* incompressible bytes */
- u_int uncomp_count; /* uncompressed packets */
- u_int uncomp_bytes; /* uncompressed bytes */
- u_int comp_count; /* compressed packets */
- u_int comp_bytes; /* compressed bytes */
- u_short *lens; /* array of lengths of codes */
- struct bsd_dict {
- union { /* hash value */
- u_int32_t fcode;
- struct {
-#ifdef BSD_LITTLE_ENDIAN
- u_short prefix; /* preceding code */
- u_char suffix; /* last character of new code */
- u_char pad;
-#else
- u_char pad;
- u_char suffix; /* last character of new code */
- u_short prefix; /* preceding code */
-#endif
- } hs;
- } f;
- u_short codem1; /* output of hash table -1 */
- u_short cptr; /* map code to hash table entry */
- } dict[1];
-};
-
-#define BSD_OVHD 2 /* BSD compress overhead/packet */
-#define BSD_INIT_BITS BSD_MIN_BITS
-
-static void *bsd_comp_alloc __P((u_char *options, int opt_len));
-static void *bsd_decomp_alloc __P((u_char *options, int opt_len));
-static void bsd_free __P((void *state));
-static int bsd_comp_init __P((void *state, u_char *options, int opt_len,
- int unit, int hdrlen, int debug));
-static int bsd_decomp_init __P((void *state, u_char *options, int opt_len,
- int unit, int hdrlen, int mru, int debug));
-static int bsd_compress __P((void *state, mblk_t **mret,
- mblk_t *mp, int slen, int maxolen));
-static void bsd_incomp __P((void *state, mblk_t *dmsg));
-static int bsd_decompress __P((void *state, mblk_t *cmp, mblk_t **dmpp));
-static void bsd_reset __P((void *state));
-static void bsd_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Procedures exported to ppp_comp.c.
- */
-struct compressor ppp_bsd_compress = {
- CI_BSD_COMPRESS, /* compress_proto */
- bsd_comp_alloc, /* comp_alloc */
- bsd_free, /* comp_free */
- bsd_comp_init, /* comp_init */
- bsd_reset, /* comp_reset */
- bsd_compress, /* compress */
- bsd_comp_stats, /* comp_stat */
- bsd_decomp_alloc, /* decomp_alloc */
- bsd_free, /* decomp_free */
- bsd_decomp_init, /* decomp_init */
- bsd_reset, /* decomp_reset */
- bsd_decompress, /* decompress */
- bsd_incomp, /* incomp */
- bsd_comp_stats, /* decomp_stat */
-};
-
-/*
- * the next two codes should not be changed lightly, as they must not
- * lie within the contiguous general code space.
- */
-#define CLEAR 256 /* table clear output code */
-#define FIRST 257 /* first free entry */
-#define LAST 255
-
-#define MAXCODE(b) ((1 << (b)) - 1)
-#define BADCODEM1 MAXCODE(BSD_MAX_BITS)
-
-#define BSD_HASH(prefix,suffix,hshift) ((((u_int32_t)(suffix)) << (hshift)) \
- ^ (u_int32_t)(prefix))
-#define BSD_KEY(prefix,suffix) ((((u_int32_t)(suffix)) << 16) \
- + (u_int32_t)(prefix))
-
-#define CHECK_GAP 10000 /* Ratio check interval */
-
-#define RATIO_SCALE_LOG 8
-#define RATIO_SCALE (1<<RATIO_SCALE_LOG)
-#define RATIO_MAX (0x7fffffff>>RATIO_SCALE_LOG)
-
-#define DECOMP_CHUNK 256
-
-/*
- * clear the dictionary
- */
-static void
-bsd_clear(db)
- struct bsd_db *db;
-{
- db->clear_count++;
- db->max_ent = FIRST-1;
- db->n_bits = BSD_INIT_BITS;
- db->ratio = 0;
- db->bytes_out = 0;
- db->in_count = 0;
- db->checkpoint = CHECK_GAP;
-}
-
-/*
- * If the dictionary is full, then see if it is time to reset it.
- *
- * Compute the compression ratio using fixed-point arithmetic
- * with 8 fractional bits.
- *
- * Since we have an infinite stream instead of a single file,
- * watch only the local compression ratio.
- *
- * Since both peers must reset the dictionary at the same time even in
- * the absence of CLEAR codes (while packets are incompressible), they
- * must compute the same ratio.
- */
-static int /* 1=output CLEAR */
-bsd_check(db)
- struct bsd_db *db;
-{
- u_int new_ratio;
-
- if (db->in_count >= db->checkpoint) {
- /* age the ratio by limiting the size of the counts */
- if (db->in_count >= RATIO_MAX
- || db->bytes_out >= RATIO_MAX) {
- db->in_count -= db->in_count/4;
- db->bytes_out -= db->bytes_out/4;
- }
-
- db->checkpoint = db->in_count + CHECK_GAP;
-
- if (db->max_ent >= db->maxmaxcode) {
- /* Reset the dictionary only if the ratio is worse,
- * or if it looks as if it has been poisoned
- * by incompressible data.
- *
- * This does not overflow, because
- * db->in_count <= RATIO_MAX.
- */
- new_ratio = db->in_count << RATIO_SCALE_LOG;
- if (db->bytes_out != 0)
- new_ratio /= db->bytes_out;
-
- if (new_ratio < db->ratio || new_ratio < 1 * RATIO_SCALE) {
- bsd_clear(db);
- return 1;
- }
- db->ratio = new_ratio;
- }
- }
- return 0;
-}
-
-/*
- * Return statistics.
- */
-static void
-bsd_comp_stats(state, stats)
- void *state;
- struct compstat *stats;
-{
- struct bsd_db *db = (struct bsd_db *) state;
- u_int out;
-
- stats->unc_bytes = db->uncomp_bytes;
- stats->unc_packets = db->uncomp_count;
- stats->comp_bytes = db->comp_bytes;
- stats->comp_packets = db->comp_count;
- stats->inc_bytes = db->incomp_bytes;
- stats->inc_packets = db->incomp_count;
- stats->ratio = db->in_count;
- out = db->bytes_out;
- if (stats->ratio <= 0x7fffff)
- stats->ratio <<= 8;
- else
- out >>= 8;
- if (out != 0)
- stats->ratio /= out;
-}
-
-/*
- * Reset state, as on a CCP ResetReq.
- */
-static void
-bsd_reset(state)
- void *state;
-{
- struct bsd_db *db = (struct bsd_db *) state;
-
- db->seqno = 0;
- bsd_clear(db);
- db->clear_count = 0;
-}
-
-/*
- * Allocate space for a (de) compressor.
- */
-static void *
-bsd_alloc(options, opt_len, decomp)
- u_char *options;
- int opt_len, decomp;
-{
- int bits;
- u_int newlen, hsize, hshift, maxmaxcode;
- struct bsd_db *db;
-
- if (opt_len != 3 || options[0] != CI_BSD_COMPRESS || options[1] != 3
- || BSD_VERSION(options[2]) != BSD_CURRENT_VERSION)
- return NULL;
-
- bits = BSD_NBITS(options[2]);
- switch (bits) {
- case 9: /* needs 82152 for both directions */
- case 10: /* needs 84144 */
- case 11: /* needs 88240 */
- case 12: /* needs 96432 */
- hsize = 5003;
- hshift = 4;
- break;
- case 13: /* needs 176784 */
- hsize = 9001;
- hshift = 5;
- break;
- case 14: /* needs 353744 */
- hsize = 18013;
- hshift = 6;
- break;
- case 15: /* needs 691440 */
- hsize = 35023;
- hshift = 7;
- break;
- case 16: /* needs 1366160--far too much, */
- /* hsize = 69001; */ /* and 69001 is too big for cptr */
- /* hshift = 8; */ /* in struct bsd_db */
- /* break; */
- default:
- return NULL;
- }
-
- maxmaxcode = MAXCODE(bits);
- newlen = sizeof(*db) + (hsize-1) * (sizeof(db->dict[0]));
-#ifdef __osf__
- db = (struct bsd_db *) ALLOC_SLEEP(newlen);
-#else
- db = (struct bsd_db *) ALLOC_NOSLEEP(newlen);
-#endif
- if (!db)
- return NULL;
- bzero(db, sizeof(*db) - sizeof(db->dict));
-
- if (!decomp) {
- db->lens = NULL;
- } else {
-#ifdef __osf__
- db->lens = (u_short *) ALLOC_SLEEP((maxmaxcode+1) * sizeof(db->lens[0]));
-#else
- db->lens = (u_short *) ALLOC_NOSLEEP((maxmaxcode+1) * sizeof(db->lens[0]));
-#endif
- if (!db->lens) {
- FREE(db, newlen);
- return NULL;
- }
- }
-
- db->totlen = newlen;
- db->hsize = hsize;
- db->hshift = hshift;
- db->maxmaxcode = maxmaxcode;
- db->maxbits = bits;
-
- return (void *) db;
-}
-
-static void
-bsd_free(state)
- void *state;
-{
- struct bsd_db *db = (struct bsd_db *) state;
-
- if (db->lens)
- FREE(db->lens, (db->maxmaxcode+1) * sizeof(db->lens[0]));
- FREE(db, db->totlen);
-}
-
-static void *
-bsd_comp_alloc(options, opt_len)
- u_char *options;
- int opt_len;
-{
- return bsd_alloc(options, opt_len, 0);
-}
-
-static void *
-bsd_decomp_alloc(options, opt_len)
- u_char *options;
- int opt_len;
-{
- return bsd_alloc(options, opt_len, 1);
-}
-
-/*
- * Initialize the database.
- */
-static int
-bsd_init(db, options, opt_len, unit, hdrlen, mru, debug, decomp)
- struct bsd_db *db;
- u_char *options;
- int opt_len, unit, hdrlen, mru, debug, decomp;
-{
- int i;
-
- if (opt_len < CILEN_BSD_COMPRESS
- || options[0] != CI_BSD_COMPRESS || options[1] != CILEN_BSD_COMPRESS
- || BSD_VERSION(options[2]) != BSD_CURRENT_VERSION
- || BSD_NBITS(options[2]) != db->maxbits
- || decomp && db->lens == NULL)
- return 0;
-
- if (decomp) {
- i = LAST+1;
- while (i != 0)
- db->lens[--i] = 1;
- }
- i = db->hsize;
- while (i != 0) {
- db->dict[--i].codem1 = BADCODEM1;
- db->dict[i].cptr = 0;
- }
-
- db->unit = unit;
- db->hdrlen = hdrlen;
- db->mru = mru;
- if (debug)
- db->debug = 1;
-
- bsd_reset(db);
-
- return 1;
-}
-
-static int
-bsd_comp_init(state, options, opt_len, unit, hdrlen, debug)
- void *state;
- u_char *options;
- int opt_len, unit, hdrlen, debug;
-{
- return bsd_init((struct bsd_db *) state, options, opt_len,
- unit, hdrlen, 0, debug, 0);
-}
-
-static int
-bsd_decomp_init(state, options, opt_len, unit, hdrlen, mru, debug)
- void *state;
- u_char *options;
- int opt_len, unit, hdrlen, mru, debug;
-{
- return bsd_init((struct bsd_db *) state, options, opt_len,
- unit, hdrlen, mru, debug, 1);
-}
-
-
-/*
- * compress a packet
- * One change from the BSD compress command is that when the
- * code size expands, we do not output a bunch of padding.
- *
- * N.B. at present, we ignore the hdrlen specified in the comp_init call.
- */
-static int /* new slen */
-bsd_compress(state, mretp, mp, slen, maxolen)
- void *state;
- mblk_t **mretp; /* return compressed mbuf chain here */
- mblk_t *mp; /* from here */
- int slen; /* uncompressed length */
- int maxolen; /* max compressed length */
-{
- struct bsd_db *db = (struct bsd_db *) state;
- int hshift = db->hshift;
- u_int max_ent = db->max_ent;
- u_int n_bits = db->n_bits;
- u_int bitno = 32;
- u_int32_t accm = 0, fcode;
- struct bsd_dict *dictp;
- u_char c;
- int hval, disp, ent, ilen;
- mblk_t *np, *mret;
- u_char *rptr, *wptr;
- u_char *cp_end;
- int olen;
- mblk_t *m, **mnp;
-
-#define PUTBYTE(v) { \
- if (wptr) { \
- *wptr++ = (v); \
- if (wptr >= cp_end) { \
- m->b_wptr = wptr; \
- m = m->b_cont; \
- if (m) { \
- wptr = m->b_wptr; \
- cp_end = m->b_datap->db_lim; \
- } else \
- wptr = NULL; \
- } \
- } \
- ++olen; \
-}
-
-#define OUTPUT(ent) { \
- bitno -= n_bits; \
- accm |= ((ent) << bitno); \
- do { \
- PUTBYTE(accm >> 24); \
- accm <<= 8; \
- bitno += 8; \
- } while (bitno <= 24); \
-}
-
- /*
- * First get the protocol and check that we're
- * interested in this packet.
- */
- *mretp = NULL;
- rptr = mp->b_rptr;
- if (rptr + PPP_HDRLEN > mp->b_wptr) {
- if (!pullupmsg(mp, PPP_HDRLEN))
- return 0;
- rptr = mp->b_rptr;
- }
- ent = PPP_PROTOCOL(rptr); /* get the protocol */
- if (ent < 0x21 || ent > 0xf9)
- return 0;
-
- /* Don't generate compressed packets which are larger than
- the uncompressed packet. */
- if (maxolen > slen)
- maxolen = slen;
-
- /* Allocate enough message blocks to give maxolen total space. */
- mnp = &mret;
- for (olen = maxolen; olen > 0; ) {
- m = allocb((olen < 4096? olen: 4096), BPRI_MED);
- *mnp = m;
- if (m == NULL) {
- if (mret != NULL) {
- freemsg(mret);
- mnp = &mret;
- }
- break;
- }
- mnp = &m->b_cont;
- olen -= m->b_datap->db_lim - m->b_wptr;
- }
- *mnp = NULL;
-
- if ((m = mret) != NULL) {
- wptr = m->b_wptr;
- cp_end = m->b_datap->db_lim;
- } else
- wptr = cp_end = NULL;
- olen = 0;
-
- /*
- * Copy the PPP header over, changing the protocol,
- * and install the 2-byte sequence number.
- */
- if (wptr) {
- wptr[0] = PPP_ADDRESS(rptr);
- wptr[1] = PPP_CONTROL(rptr);
- wptr[2] = 0; /* change the protocol */
- wptr[3] = PPP_COMP;
- wptr[4] = db->seqno >> 8;
- wptr[5] = db->seqno;
- wptr += PPP_HDRLEN + BSD_OVHD;
- }
- ++db->seqno;
- rptr += PPP_HDRLEN;
-
- slen = mp->b_wptr - rptr;
- ilen = slen + 1;
- np = mp->b_cont;
- for (;;) {
- if (slen <= 0) {
- if (!np)
- break;
- rptr = np->b_rptr;
- slen = np->b_wptr - rptr;
- np = np->b_cont;
- if (!slen)
- continue; /* handle 0-length buffers */
- ilen += slen;
- }
-
- slen--;
- c = *rptr++;
- fcode = BSD_KEY(ent, c);
- hval = BSD_HASH(ent, c, hshift);
- dictp = &db->dict[hval];
-
- /* Validate and then check the entry. */
- if (dictp->codem1 >= max_ent)
- goto nomatch;
- if (dictp->f.fcode == fcode) {
- ent = dictp->codem1+1;
- continue; /* found (prefix,suffix) */
- }
-
- /* continue probing until a match or invalid entry */
- disp = (hval == 0) ? 1 : hval;
- do {
- hval += disp;
- if (hval >= db->hsize)
- hval -= db->hsize;
- dictp = &db->dict[hval];
- if (dictp->codem1 >= max_ent)
- goto nomatch;
- } while (dictp->f.fcode != fcode);
- ent = dictp->codem1 + 1; /* finally found (prefix,suffix) */
- continue;
-
- nomatch:
- OUTPUT(ent); /* output the prefix */
-
- /* code -> hashtable */
- if (max_ent < db->maxmaxcode) {
- struct bsd_dict *dictp2;
- /* expand code size if needed */
- if (max_ent >= MAXCODE(n_bits))
- db->n_bits = ++n_bits;
-
- /* Invalidate old hash table entry using
- * this code, and then take it over.
- */
- dictp2 = &db->dict[max_ent+1];
- if (db->dict[dictp2->cptr].codem1 == max_ent)
- db->dict[dictp2->cptr].codem1 = BADCODEM1;
- dictp2->cptr = hval;
- dictp->codem1 = max_ent;
- dictp->f.fcode = fcode;
-
- db->max_ent = ++max_ent;
- }
- ent = c;
- }
-
- OUTPUT(ent); /* output the last code */
- db->bytes_out += olen;
- db->in_count += ilen;
- if (bitno < 32)
- ++db->bytes_out; /* count complete bytes */
-
- if (bsd_check(db))
- OUTPUT(CLEAR); /* do not count the CLEAR */
-
- /*
- * Pad dribble bits of last code with ones.
- * Do not emit a completely useless byte of ones.
- */
- if (bitno != 32)
- PUTBYTE((accm | (0xff << (bitno-8))) >> 24);
-
- /*
- * Increase code size if we would have without the packet
- * boundary and as the decompressor will.
- */
- if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode)
- db->n_bits++;
-
- db->uncomp_bytes += ilen;
- ++db->uncomp_count;
- if (olen + PPP_HDRLEN + BSD_OVHD > maxolen && mret != NULL) {
- /* throw away the compressed stuff if it is longer than uncompressed */
- freemsg(mret);
- mret = NULL;
- ++db->incomp_count;
- db->incomp_bytes += ilen;
- } else if (wptr != NULL) {
- m->b_wptr = wptr;
- if (m->b_cont) {
- freemsg(m->b_cont);
- m->b_cont = NULL;
- }
- ++db->comp_count;
- db->comp_bytes += olen + BSD_OVHD;
- }
-
- *mretp = mret;
- return olen + PPP_HDRLEN + BSD_OVHD;
-#undef OUTPUT
-#undef PUTBYTE
-}
-
-
-/*
- * Update the "BSD Compress" dictionary on the receiver for
- * incompressible data by pretending to compress the incoming data.
- */
-static void
-bsd_incomp(state, dmsg)
- void *state;
- mblk_t *dmsg;
-{
- struct bsd_db *db = (struct bsd_db *) state;
- u_int hshift = db->hshift;
- u_int max_ent = db->max_ent;
- u_int n_bits = db->n_bits;
- struct bsd_dict *dictp;
- u_int32_t fcode;
- u_char c;
- long hval, disp;
- int slen, ilen;
- u_int bitno = 7;
- u_char *rptr;
- u_int ent;
-
- rptr = dmsg->b_rptr;
- if (rptr + PPP_HDRLEN > dmsg->b_wptr) {
- if (!pullupmsg(dmsg, PPP_HDRLEN))
- return;
- rptr = dmsg->b_rptr;
- }
- ent = PPP_PROTOCOL(rptr); /* get the protocol */
- if (ent < 0x21 || ent > 0xf9)
- return;
-
- db->seqno++;
- ilen = 1; /* count the protocol as 1 byte */
- rptr += PPP_HDRLEN;
- for (;;) {
- slen = dmsg->b_wptr - rptr;
- if (slen <= 0) {
- dmsg = dmsg->b_cont;
- if (!dmsg)
- break;
- rptr = dmsg->b_rptr;
- continue; /* skip zero-length buffers */
- }
- ilen += slen;
-
- do {
- c = *rptr++;
- fcode = BSD_KEY(ent, c);
- hval = BSD_HASH(ent, c, hshift);
- dictp = &db->dict[hval];
-
- /* validate and then check the entry */
- if (dictp->codem1 >= max_ent)
- goto nomatch;
- if (dictp->f.fcode == fcode) {
- ent = dictp->codem1+1;
- continue; /* found (prefix,suffix) */
- }
-
- /* continue probing until a match or invalid entry */
- disp = (hval == 0) ? 1 : hval;
- do {
- hval += disp;
- if (hval >= db->hsize)
- hval -= db->hsize;
- dictp = &db->dict[hval];
- if (dictp->codem1 >= max_ent)
- goto nomatch;
- } while (dictp->f.fcode != fcode);
- ent = dictp->codem1+1;
- continue; /* finally found (prefix,suffix) */
-
- nomatch: /* output (count) the prefix */
- bitno += n_bits;
-
- /* code -> hashtable */
- if (max_ent < db->maxmaxcode) {
- struct bsd_dict *dictp2;
- /* expand code size if needed */
- if (max_ent >= MAXCODE(n_bits))
- db->n_bits = ++n_bits;
-
- /* Invalidate previous hash table entry
- * assigned this code, and then take it over.
- */
- dictp2 = &db->dict[max_ent+1];
- if (db->dict[dictp2->cptr].codem1 == max_ent)
- db->dict[dictp2->cptr].codem1 = BADCODEM1;
- dictp2->cptr = hval;
- dictp->codem1 = max_ent;
- dictp->f.fcode = fcode;
-
- db->max_ent = ++max_ent;
- db->lens[max_ent] = db->lens[ent]+1;
- }
- ent = c;
- } while (--slen != 0);
- }
- bitno += n_bits; /* output (count) the last code */
- db->bytes_out += bitno/8;
- db->in_count += ilen;
- (void)bsd_check(db);
-
- ++db->incomp_count;
- db->incomp_bytes += ilen;
- ++db->uncomp_count;
- db->uncomp_bytes += ilen;
-
- /* Increase code size if we would have without the packet
- * boundary and as the decompressor will.
- */
- if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode)
- db->n_bits++;
-}
-
-
-/*
- * Decompress "BSD Compress"
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression. For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-bsd_decompress(state, cmsg, dmpp)
- void *state;
- mblk_t *cmsg, **dmpp;
-{
- struct bsd_db *db = (struct bsd_db *) state;
- u_int max_ent = db->max_ent;
- u_int32_t accm = 0;
- u_int bitno = 32; /* 1st valid bit in accm */
- u_int n_bits = db->n_bits;
- u_int tgtbitno = 32-n_bits; /* bitno when we have a code */
- struct bsd_dict *dictp;
- int explen, i, seq, len;
- u_int incode, oldcode, finchar;
- u_char *p, *rptr, *wptr;
- mblk_t *dmsg, *mret;
- int adrs, ctrl, ilen;
- int dlen, space, codelen, extra;
-
- /*
- * Get at least the BSD Compress header in the first buffer
- */
- rptr = cmsg->b_rptr;
- if (rptr + PPP_HDRLEN + BSD_OVHD >= cmsg->b_wptr) {
- if (!pullupmsg(cmsg, PPP_HDRLEN + BSD_OVHD + 1)) {
- if (db->debug)
- printf("bsd_decomp%d: failed to pullup\n", db->unit);
- return DECOMP_ERROR;
- }
- rptr = cmsg->b_rptr;
- }
-
- /*
- * Save the address/control from the PPP header
- * and then get the sequence number.
- */
- adrs = PPP_ADDRESS(rptr);
- ctrl = PPP_CONTROL(rptr);
- rptr += PPP_HDRLEN;
- seq = (rptr[0] << 8) + rptr[1];
- rptr += BSD_OVHD;
- ilen = len = cmsg->b_wptr - rptr;
-
- /*
- * Check the sequence number and give up if it is not what we expect.
- */
- if (seq != db->seqno++) {
- if (db->debug)
- printf("bsd_decomp%d: bad sequence # %d, expected %d\n",
- db->unit, seq, db->seqno - 1);
- return DECOMP_ERROR;
- }
-
- /*
- * Allocate one message block to start with.
- */
- if ((dmsg = allocb(DECOMP_CHUNK + db->hdrlen, BPRI_MED)) == NULL)
- return DECOMP_ERROR;
- mret = dmsg;
- dmsg->b_wptr += db->hdrlen;
- dmsg->b_rptr = wptr = dmsg->b_wptr;
-
- /* Fill in the ppp header, but not the last byte of the protocol
- (that comes from the decompressed data). */
- wptr[0] = adrs;
- wptr[1] = ctrl;
- wptr[2] = 0;
- wptr += PPP_HDRLEN - 1;
- space = dmsg->b_datap->db_lim - wptr;
-
- oldcode = CLEAR;
- explen = 0;
- for (;;) {
- if (len == 0) {
- cmsg = cmsg->b_cont;
- if (!cmsg) /* quit at end of message */
- break;
- rptr = cmsg->b_rptr;
- len = cmsg->b_wptr - rptr;
- ilen += len;
- continue; /* handle 0-length buffers */
- }
-
- /*
- * Accumulate bytes until we have a complete code.
- * Then get the next code, relying on the 32-bit,
- * unsigned accm to mask the result.
- */
- bitno -= 8;
- accm |= *rptr++ << bitno;
- --len;
- if (tgtbitno < bitno)
- continue;
- incode = accm >> tgtbitno;
- accm <<= n_bits;
- bitno += n_bits;
-
- if (incode == CLEAR) {
- /*
- * The dictionary must only be cleared at
- * the end of a packet. But there could be an
- * empty message block at the end.
- */
- if (len > 0 || cmsg->b_cont != 0) {
- if (cmsg->b_cont)
- len += msgdsize(cmsg->b_cont);
- if (len > 0) {
- freemsg(dmsg);
- if (db->debug)
- printf("bsd_decomp%d: bad CLEAR\n", db->unit);
- return DECOMP_FATALERROR;
- }
- }
- bsd_clear(db);
- explen = ilen = 0;
- break;
- }
-
- if (incode > max_ent + 2 || incode > db->maxmaxcode
- || incode > max_ent && oldcode == CLEAR) {
- freemsg(dmsg);
- if (db->debug) {
- printf("bsd_decomp%d: bad code 0x%x oldcode=0x%x ",
- db->unit, incode, oldcode);
- printf("max_ent=0x%x dlen=%d seqno=%d\n",
- max_ent, dlen, db->seqno);
- }
- return DECOMP_FATALERROR; /* probably a bug */
- }
-
- /* Special case for KwKwK string. */
- if (incode > max_ent) {
- finchar = oldcode;
- extra = 1;
- } else {
- finchar = incode;
- extra = 0;
- }
-
- codelen = db->lens[finchar];
- explen += codelen + extra;
- if (explen > db->mru + 1) {
- freemsg(dmsg);
- if (db->debug)
- printf("bsd_decomp%d: ran out of mru\n", db->unit);
- return DECOMP_FATALERROR;
- }
-
- /*
- * Decode this code and install it in the decompressed buffer.
- */
- space -= codelen + extra;
- if (space < 0) {
- /* Allocate another message block. */
- dmsg->b_wptr = wptr;
- dlen = codelen + extra;
- if (dlen < DECOMP_CHUNK)
- dlen = DECOMP_CHUNK;
- if ((dmsg->b_cont = allocb(dlen, BPRI_MED)) == NULL) {
- freemsg(dmsg);
- return DECOMP_ERROR;
- }
- dmsg = dmsg->b_cont;
- wptr = dmsg->b_wptr;
- space = dmsg->b_datap->db_lim - wptr - codelen - extra;
- }
- p = (wptr += codelen);
- while (finchar > LAST) {
- dictp = &db->dict[db->dict[finchar].cptr];
-#ifdef DEBUG
- --codelen;
- if (codelen <= 0) {
- freemsg(dmsg);
- printf("bsd_decomp%d: fell off end of chain ", db->unit);
- printf("0x%x at 0x%x by 0x%x, max_ent=0x%x\n",
- incode, finchar, db->dict[finchar].cptr, max_ent);
- return DECOMP_FATALERROR;
- }
- if (dictp->codem1 != finchar-1) {
- freemsg(dmsg);
- printf("bsd_decomp%d: bad code chain 0x%x finchar=0x%x ",
- db->unit, incode, finchar);
- printf("oldcode=0x%x cptr=0x%x codem1=0x%x\n", oldcode,
- db->dict[finchar].cptr, dictp->codem1);
- return DECOMP_FATALERROR;
- }
-#endif
- *--p = dictp->f.hs.suffix;
- finchar = dictp->f.hs.prefix;
- }
- *--p = finchar;
-
-#ifdef DEBUG
- if (--codelen != 0)
- printf("bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n",
- db->unit, codelen, incode, max_ent);
-#endif
-
- if (extra) /* the KwKwK case again */
- *wptr++ = finchar;
-
- /*
- * If not first code in a packet, and
- * if not out of code space, then allocate a new code.
- *
- * Keep the hash table correct so it can be used
- * with uncompressed packets.
- */
- if (oldcode != CLEAR && max_ent < db->maxmaxcode) {
- struct bsd_dict *dictp2;
- u_int32_t fcode;
- int hval, disp;
-
- fcode = BSD_KEY(oldcode,finchar);
- hval = BSD_HASH(oldcode,finchar,db->hshift);
- dictp = &db->dict[hval];
-
- /* look for a free hash table entry */
- if (dictp->codem1 < max_ent) {
- disp = (hval == 0) ? 1 : hval;
- do {
- hval += disp;
- if (hval >= db->hsize)
- hval -= db->hsize;
- dictp = &db->dict[hval];
- } while (dictp->codem1 < max_ent);
- }
-
- /*
- * Invalidate previous hash table entry
- * assigned this code, and then take it over
- */
- dictp2 = &db->dict[max_ent+1];
- if (db->dict[dictp2->cptr].codem1 == max_ent) {
- db->dict[dictp2->cptr].codem1 = BADCODEM1;
- }
- dictp2->cptr = hval;
- dictp->codem1 = max_ent;
- dictp->f.fcode = fcode;
-
- db->max_ent = ++max_ent;
- db->lens[max_ent] = db->lens[oldcode]+1;
-
- /* Expand code size if needed. */
- if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode) {
- db->n_bits = ++n_bits;
- tgtbitno = 32-n_bits;
- }
- }
- oldcode = incode;
- }
- dmsg->b_wptr = wptr;
-
- /*
- * Keep the checkpoint right so that incompressible packets
- * clear the dictionary at the right times.
- */
- db->bytes_out += ilen;
- db->in_count += explen;
- if (bsd_check(db) && db->debug) {
- printf("bsd_decomp%d: peer should have cleared dictionary\n",
- db->unit);
- }
-
- ++db->comp_count;
- db->comp_bytes += ilen + BSD_OVHD;
- ++db->uncomp_count;
- db->uncomp_bytes += explen;
-
- *dmpp = mret;
- return DECOMP_OK;
-}
-#endif /* DO_BSD_COMPRESS */
diff --git a/mdk-stage1/ppp/modules/deflate.c b/mdk-stage1/ppp/modules/deflate.c
deleted file mode 100644
index 1b9054412..000000000
--- a/mdk-stage1/ppp/modules/deflate.c
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- * ppp_deflate.c - interface the zlib procedures for Deflate compression
- * and decompression (as used by gzip) to the PPP code.
- * This version is for use with STREAMS under SunOS 4.x, Solaris 2,
- * SVR4, OSF/1 and AIX 4.x.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#ifdef AIX4
-#include <net/net_globals.h>
-#endif
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/stream.h>
-#include <net/ppp_defs.h>
-#include "ppp_mod.h"
-
-#define PACKETPTR mblk_t *
-#include <net/ppp-comp.h>
-
-#ifdef __osf__
-#include "zlib.h"
-#else
-#include "../common/zlib.h"
-#endif
-
-#if DO_DEFLATE
-
-#define DEFLATE_DEBUG 1
-
-/*
- * State for a Deflate (de)compressor.
- */
-struct deflate_state {
- int seqno;
- int w_size;
- int unit;
- int hdrlen;
- int mru;
- int debug;
- z_stream strm;
- struct compstat stats;
-};
-
-#define DEFLATE_OVHD 2 /* Deflate overhead/packet */
-
-static void *z_alloc __P((void *, u_int items, u_int size));
-static void *z_alloc_init __P((void *, u_int items, u_int size));
-static void z_free __P((void *, void *ptr));
-static void *z_comp_alloc __P((u_char *options, int opt_len));
-static void *z_decomp_alloc __P((u_char *options, int opt_len));
-static void z_comp_free __P((void *state));
-static void z_decomp_free __P((void *state));
-static int z_comp_init __P((void *state, u_char *options, int opt_len,
- int unit, int hdrlen, int debug));
-static int z_decomp_init __P((void *state, u_char *options, int opt_len,
- int unit, int hdrlen, int mru, int debug));
-static int z_compress __P((void *state, mblk_t **mret,
- mblk_t *mp, int slen, int maxolen));
-static void z_incomp __P((void *state, mblk_t *dmsg));
-static int z_decompress __P((void *state, mblk_t *cmp,
- mblk_t **dmpp));
-static void z_comp_reset __P((void *state));
-static void z_decomp_reset __P((void *state));
-static void z_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Procedures exported to ppp_comp.c.
- */
-struct compressor ppp_deflate = {
- CI_DEFLATE, /* compress_proto */
- z_comp_alloc, /* comp_alloc */
- z_comp_free, /* comp_free */
- z_comp_init, /* comp_init */
- z_comp_reset, /* comp_reset */
- z_compress, /* compress */
- z_comp_stats, /* comp_stat */
- z_decomp_alloc, /* decomp_alloc */
- z_decomp_free, /* decomp_free */
- z_decomp_init, /* decomp_init */
- z_decomp_reset, /* decomp_reset */
- z_decompress, /* decompress */
- z_incomp, /* incomp */
- z_comp_stats, /* decomp_stat */
-};
-
-struct compressor ppp_deflate_draft = {
- CI_DEFLATE_DRAFT, /* compress_proto */
- z_comp_alloc, /* comp_alloc */
- z_comp_free, /* comp_free */
- z_comp_init, /* comp_init */
- z_comp_reset, /* comp_reset */
- z_compress, /* compress */
- z_comp_stats, /* comp_stat */
- z_decomp_alloc, /* decomp_alloc */
- z_decomp_free, /* decomp_free */
- z_decomp_init, /* decomp_init */
- z_decomp_reset, /* decomp_reset */
- z_decompress, /* decompress */
- z_incomp, /* incomp */
- z_comp_stats, /* decomp_stat */
-};
-
-#define DECOMP_CHUNK 512
-
-/*
- * Space allocation and freeing routines for use by zlib routines.
- */
-struct zchunk {
- u_int size;
- u_int guard;
-};
-
-#define GUARD_MAGIC 0x77a6011a
-
-static void *
-z_alloc_init(notused, items, size)
- void *notused;
- u_int items, size;
-{
- struct zchunk *z;
-
- size = items * size + sizeof(struct zchunk);
-#ifdef __osf__
- z = (struct zchunk *) ALLOC_SLEEP(size);
-#else
- z = (struct zchunk *) ALLOC_NOSLEEP(size);
-#endif
- z->size = size;
- z->guard = GUARD_MAGIC;
- return (void *) (z + 1);
-}
-
-static void *
-z_alloc(notused, items, size)
- void *notused;
- u_int items, size;
-{
- struct zchunk *z;
-
- size = items * size + sizeof(struct zchunk);
- z = (struct zchunk *) ALLOC_NOSLEEP(size);
- z->size = size;
- z->guard = GUARD_MAGIC;
- return (void *) (z + 1);
-}
-
-static void
-z_free(notused, ptr)
- void *notused;
- void *ptr;
-{
- struct zchunk *z = ((struct zchunk *) ptr) - 1;
-
- if (z->guard != GUARD_MAGIC) {
- printf("ppp: z_free of corrupted chunk at %x (%x, %x)\n",
- z, z->size, z->guard);
- return;
- }
- FREE(z, z->size);
-}
-
-/*
- * Allocate space for a compressor.
- */
-static void *
-z_comp_alloc(options, opt_len)
- u_char *options;
- int opt_len;
-{
- struct deflate_state *state;
- int w_size;
-
- if (opt_len != CILEN_DEFLATE
- || (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
- || options[1] != CILEN_DEFLATE
- || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
- || options[3] != DEFLATE_CHK_SEQUENCE)
- return NULL;
- w_size = DEFLATE_SIZE(options[2]);
- /*
- * N.B. the 9 below should be DEFLATE_MIN_SIZE (8), but using
- * 8 will cause kernel crashes because of a bug in zlib.
- */
- if (w_size < 9 || w_size > DEFLATE_MAX_SIZE)
- return NULL;
-
-
-#ifdef __osf__
- state = (struct deflate_state *) ALLOC_SLEEP(sizeof(*state));
-#else
- state = (struct deflate_state *) ALLOC_NOSLEEP(sizeof(*state));
-#endif
-
- if (state == NULL)
- return NULL;
-
- state->strm.next_in = NULL;
- state->strm.zalloc = (alloc_func) z_alloc_init;
- state->strm.zfree = (free_func) z_free;
- if (deflateInit2(&state->strm, Z_DEFAULT_COMPRESSION, DEFLATE_METHOD_VAL,
- -w_size, 8, Z_DEFAULT_STRATEGY) != Z_OK) {
- FREE(state, sizeof(*state));
- return NULL;
- }
-
- state->strm.zalloc = (alloc_func) z_alloc;
- state->w_size = w_size;
- bzero(&state->stats, sizeof(state->stats));
- return (void *) state;
-}
-
-static void
-z_comp_free(arg)
- void *arg;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
-
- deflateEnd(&state->strm);
- FREE(state, sizeof(*state));
-}
-
-static int
-z_comp_init(arg, options, opt_len, unit, hdrlen, debug)
- void *arg;
- u_char *options;
- int opt_len, unit, hdrlen, debug;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
-
- if (opt_len < CILEN_DEFLATE
- || (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
- || options[1] != CILEN_DEFLATE
- || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
- || DEFLATE_SIZE(options[2]) != state->w_size
- || options[3] != DEFLATE_CHK_SEQUENCE)
- return 0;
-
- state->seqno = 0;
- state->unit = unit;
- state->hdrlen = hdrlen;
- state->debug = debug;
-
- deflateReset(&state->strm);
-
- return 1;
-}
-
-static void
-z_comp_reset(arg)
- void *arg;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
-
- state->seqno = 0;
- deflateReset(&state->strm);
-}
-
-static int
-z_compress(arg, mret, mp, orig_len, maxolen)
- void *arg;
- mblk_t **mret; /* compressed packet (out) */
- mblk_t *mp; /* uncompressed packet (in) */
- int orig_len, maxolen;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
- u_char *rptr, *wptr;
- int proto, olen, wspace, r, flush;
- mblk_t *m;
-
- /*
- * Check that the protocol is in the range we handle.
- */
- *mret = NULL;
- rptr = mp->b_rptr;
- if (rptr + PPP_HDRLEN > mp->b_wptr) {
- if (!pullupmsg(mp, PPP_HDRLEN))
- return 0;
- rptr = mp->b_rptr;
- }
- proto = PPP_PROTOCOL(rptr);
- if (proto > 0x3fff || proto == 0xfd || proto == 0xfb)
- return orig_len;
-
- /* Allocate one mblk initially. */
- if (maxolen > orig_len)
- maxolen = orig_len;
- if (maxolen <= PPP_HDRLEN + 2) {
- wspace = 0;
- m = NULL;
- } else {
- wspace = maxolen + state->hdrlen;
- if (wspace > 4096)
- wspace = 4096;
- m = allocb(wspace, BPRI_MED);
- }
- if (m != NULL) {
- *mret = m;
- if (state->hdrlen + PPP_HDRLEN + 2 < wspace) {
- m->b_rptr += state->hdrlen;
- m->b_wptr = m->b_rptr;
- wspace -= state->hdrlen;
- }
- wptr = m->b_wptr;
-
- /*
- * Copy over the PPP header and store the 2-byte sequence number.
- */
- wptr[0] = PPP_ADDRESS(rptr);
- wptr[1] = PPP_CONTROL(rptr);
- wptr[2] = PPP_COMP >> 8;
- wptr[3] = PPP_COMP;
- wptr += PPP_HDRLEN;
- wptr[0] = state->seqno >> 8;
- wptr[1] = state->seqno;
- wptr += 2;
- state->strm.next_out = wptr;
- state->strm.avail_out = wspace - (PPP_HDRLEN + 2);
- } else {
- state->strm.next_out = NULL;
- state->strm.avail_out = 1000000;
- }
- ++state->seqno;
-
- rptr += (proto > 0xff)? 2: 3; /* skip 1st proto byte if 0 */
- state->strm.next_in = rptr;
- state->strm.avail_in = mp->b_wptr - rptr;
- mp = mp->b_cont;
- flush = (mp == NULL)? Z_PACKET_FLUSH: Z_NO_FLUSH;
- olen = 0;
- for (;;) {
- r = deflate(&state->strm, flush);
- if (r != Z_OK) {
- printf("z_compress: deflate returned %d (%s)\n",
- r, (state->strm.msg? state->strm.msg: ""));
- break;
- }
- if (flush != Z_NO_FLUSH && state->strm.avail_out != 0)
- break; /* all done */
- if (state->strm.avail_in == 0 && mp != NULL) {
- state->strm.next_in = mp->b_rptr;
- state->strm.avail_in = mp->b_wptr - mp->b_rptr;
- mp = mp->b_cont;
- if (mp == NULL)
- flush = Z_PACKET_FLUSH;
- }
- if (state->strm.avail_out == 0) {
- if (m != NULL) {
- m->b_wptr += wspace;
- olen += wspace;
- wspace = maxolen - olen;
- if (wspace <= 0) {
- wspace = 0;
- m->b_cont = NULL;
- } else {
- if (wspace < 32)
- wspace = 32;
- else if (wspace > 4096)
- wspace = 4096;
- m->b_cont = allocb(wspace, BPRI_MED);
- }
- m = m->b_cont;
- if (m != NULL) {
- state->strm.next_out = m->b_wptr;
- state->strm.avail_out = wspace;
- }
- }
- if (m == NULL) {
- state->strm.next_out = NULL;
- state->strm.avail_out = 1000000;
- }
- }
- }
- if (m != NULL) {
- m->b_wptr += wspace - state->strm.avail_out;
- olen += wspace - state->strm.avail_out;
- }
-
- /*
- * See if we managed to reduce the size of the packet.
- */
- if (olen < orig_len && m != NULL) {
- state->stats.comp_bytes += olen;
- state->stats.comp_packets++;
- } else {
- if (*mret != NULL) {
- freemsg(*mret);
- *mret = NULL;
- }
- state->stats.inc_bytes += orig_len;
- state->stats.inc_packets++;
- olen = orig_len;
- }
- state->stats.unc_bytes += orig_len;
- state->stats.unc_packets++;
-
- return olen;
-}
-
-static void
-z_comp_stats(arg, stats)
- void *arg;
- struct compstat *stats;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
- u_int out;
-
- *stats = state->stats;
- stats->ratio = stats->unc_bytes;
- out = stats->comp_bytes + stats->unc_bytes;
- if (stats->ratio <= 0x7ffffff)
- stats->ratio <<= 8;
- else
- out >>= 8;
- if (out != 0)
- stats->ratio /= out;
-}
-
-/*
- * Allocate space for a decompressor.
- */
-static void *
-z_decomp_alloc(options, opt_len)
- u_char *options;
- int opt_len;
-{
- struct deflate_state *state;
- int w_size;
-
- if (opt_len != CILEN_DEFLATE
- || (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
- || options[1] != CILEN_DEFLATE
- || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
- || options[3] != DEFLATE_CHK_SEQUENCE)
- return NULL;
- w_size = DEFLATE_SIZE(options[2]);
- /*
- * N.B. the 9 below should be DEFLATE_MIN_SIZE (8), but using
- * 8 will cause kernel crashes because of a bug in zlib.
- */
- if (w_size < 9 || w_size > DEFLATE_MAX_SIZE)
- return NULL;
-
-#ifdef __osf__
- state = (struct deflate_state *) ALLOC_SLEEP(sizeof(*state));
-#else
- state = (struct deflate_state *) ALLOC_NOSLEEP(sizeof(*state));
-#endif
- if (state == NULL)
- return NULL;
-
- state->strm.next_out = NULL;
- state->strm.zalloc = (alloc_func) z_alloc_init;
- state->strm.zfree = (free_func) z_free;
- if (inflateInit2(&state->strm, -w_size) != Z_OK) {
- FREE(state, sizeof(*state));
- return NULL;
- }
-
- state->strm.zalloc = (alloc_func) z_alloc;
- state->w_size = w_size;
- bzero(&state->stats, sizeof(state->stats));
- return (void *) state;
-}
-
-static void
-z_decomp_free(arg)
- void *arg;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
-
- inflateEnd(&state->strm);
- FREE(state, sizeof(*state));
-}
-
-static int
-z_decomp_init(arg, options, opt_len, unit, hdrlen, mru, debug)
- void *arg;
- u_char *options;
- int opt_len, unit, hdrlen, mru, debug;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
-
- if (opt_len < CILEN_DEFLATE
- || (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
- || options[1] != CILEN_DEFLATE
- || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
- || DEFLATE_SIZE(options[2]) != state->w_size
- || options[3] != DEFLATE_CHK_SEQUENCE)
- return 0;
-
- state->seqno = 0;
- state->unit = unit;
- state->hdrlen = hdrlen;
- state->debug = debug;
- state->mru = mru;
-
- inflateReset(&state->strm);
-
- return 1;
-}
-
-static void
-z_decomp_reset(arg)
- void *arg;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
-
- state->seqno = 0;
- inflateReset(&state->strm);
-}
-
-/*
- * Decompress a Deflate-compressed packet.
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression. For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-z_decompress(arg, mi, mop)
- void *arg;
- mblk_t *mi, **mop;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
- mblk_t *mo, *mo_head;
- u_char *rptr, *wptr;
- int rlen, olen, ospace;
- int seq, i, flush, r, decode_proto;
- u_char hdr[PPP_HDRLEN + DEFLATE_OVHD];
-
- *mop = NULL;
- rptr = mi->b_rptr;
- for (i = 0; i < PPP_HDRLEN + DEFLATE_OVHD; ++i) {
- while (rptr >= mi->b_wptr) {
- mi = mi->b_cont;
- if (mi == NULL)
- return DECOMP_ERROR;
- rptr = mi->b_rptr;
- }
- hdr[i] = *rptr++;
- }
-
- /* Check the sequence number. */
- seq = (hdr[PPP_HDRLEN] << 8) + hdr[PPP_HDRLEN+1];
- if (seq != state->seqno) {
-#if !DEFLATE_DEBUG
- if (state->debug)
-#endif
- printf("z_decompress%d: bad seq # %d, expected %d\n",
- state->unit, seq, state->seqno);
- return DECOMP_ERROR;
- }
- ++state->seqno;
-
- /* Allocate an output message block. */
- mo = allocb(DECOMP_CHUNK + state->hdrlen, BPRI_MED);
- if (mo == NULL)
- return DECOMP_ERROR;
- mo_head = mo;
- mo->b_cont = NULL;
- mo->b_rptr += state->hdrlen;
- mo->b_wptr = wptr = mo->b_rptr;
- ospace = DECOMP_CHUNK;
- olen = 0;
-
- /*
- * Fill in the first part of the PPP header. The protocol field
- * comes from the decompressed data.
- */
- wptr[0] = PPP_ADDRESS(hdr);
- wptr[1] = PPP_CONTROL(hdr);
- wptr[2] = 0;
-
- /*
- * Set up to call inflate. We set avail_out to 1 initially so we can
- * look at the first byte of the output and decide whether we have
- * a 1-byte or 2-byte protocol field.
- */
- state->strm.next_in = rptr;
- state->strm.avail_in = mi->b_wptr - rptr;
- mi = mi->b_cont;
- flush = (mi == NULL)? Z_PACKET_FLUSH: Z_NO_FLUSH;
- rlen = state->strm.avail_in + PPP_HDRLEN + DEFLATE_OVHD;
- state->strm.next_out = wptr + 3;
- state->strm.avail_out = 1;
- decode_proto = 1;
-
- /*
- * Call inflate, supplying more input or output as needed.
- */
- for (;;) {
- r = inflate(&state->strm, flush);
- if (r != Z_OK) {
-#if !DEFLATE_DEBUG
- if (state->debug)
-#endif
- printf("z_decompress%d: inflate returned %d (%s)\n",
- state->unit, r, (state->strm.msg? state->strm.msg: ""));
- freemsg(mo_head);
- return DECOMP_FATALERROR;
- }
- if (flush != Z_NO_FLUSH && state->strm.avail_out != 0)
- break; /* all done */
- if (state->strm.avail_in == 0 && mi != NULL) {
- state->strm.next_in = mi->b_rptr;
- state->strm.avail_in = mi->b_wptr - mi->b_rptr;
- rlen += state->strm.avail_in;
- mi = mi->b_cont;
- if (mi == NULL)
- flush = Z_PACKET_FLUSH;
- }
- if (state->strm.avail_out == 0) {
- if (decode_proto) {
- state->strm.avail_out = ospace - PPP_HDRLEN;
- if ((wptr[3] & 1) == 0) {
- /* 2-byte protocol field */
- wptr[2] = wptr[3];
- --state->strm.next_out;
- ++state->strm.avail_out;
- }
- decode_proto = 0;
- } else {
- mo->b_wptr += ospace;
- olen += ospace;
- mo->b_cont = allocb(DECOMP_CHUNK, BPRI_MED);
- mo = mo->b_cont;
- if (mo == NULL) {
- freemsg(mo_head);
- return DECOMP_ERROR;
- }
- state->strm.next_out = mo->b_rptr;
- state->strm.avail_out = ospace = DECOMP_CHUNK;
- }
- }
- }
- if (decode_proto) {
- freemsg(mo_head);
- return DECOMP_ERROR;
- }
- mo->b_wptr += ospace - state->strm.avail_out;
- olen += ospace - state->strm.avail_out;
-
-#if DEFLATE_DEBUG
- if (olen > state->mru + PPP_HDRLEN)
- printf("ppp_deflate%d: exceeded mru (%d > %d)\n",
- state->unit, olen, state->mru + PPP_HDRLEN);
-#endif
-
- state->stats.unc_bytes += olen;
- state->stats.unc_packets++;
- state->stats.comp_bytes += rlen;
- state->stats.comp_packets++;
-
- *mop = mo_head;
- return DECOMP_OK;
-}
-
-/*
- * Incompressible data has arrived - add it to the history.
- */
-static void
-z_incomp(arg, mi)
- void *arg;
- mblk_t *mi;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
- u_char *rptr;
- int rlen, proto, r;
-
- /*
- * Check that the protocol is one we handle.
- */
- rptr = mi->b_rptr;
- if (rptr + PPP_HDRLEN > mi->b_wptr) {
- if (!pullupmsg(mi, PPP_HDRLEN))
- return;
- rptr = mi->b_rptr;
- }
- proto = PPP_PROTOCOL(rptr);
- if (proto > 0x3fff || proto == 0xfd || proto == 0xfb)
- return;
-
- ++state->seqno;
-
- /*
- * Iterate through the message blocks, adding the characters in them
- * to the decompressor's history. For the first block, we start
- * at the either the 1st or 2nd byte of the protocol field,
- * depending on whether the protocol value is compressible.
- */
- rlen = mi->b_wptr - mi->b_rptr;
- state->strm.next_in = rptr + 3;
- state->strm.avail_in = rlen - 3;
- if (proto > 0xff) {
- --state->strm.next_in;
- ++state->strm.avail_in;
- }
- for (;;) {
- r = inflateIncomp(&state->strm);
- if (r != Z_OK) {
- /* gak! */
-#if !DEFLATE_DEBUG
- if (state->debug)
-#endif
- printf("z_incomp%d: inflateIncomp returned %d (%s)\n",
- state->unit, r, (state->strm.msg? state->strm.msg: ""));
- return;
- }
- mi = mi->b_cont;
- if (mi == NULL)
- break;
- state->strm.next_in = mi->b_rptr;
- state->strm.avail_in = mi->b_wptr - mi->b_rptr;
- rlen += state->strm.avail_in;
- }
-
- /*
- * Update stats.
- */
- state->stats.inc_bytes += rlen;
- state->stats.inc_packets++;
- state->stats.unc_bytes += rlen;
- state->stats.unc_packets++;
-}
-
-#endif /* DO_DEFLATE */
diff --git a/mdk-stage1/ppp/modules/if_ppp.c b/mdk-stage1/ppp/modules/if_ppp.c
deleted file mode 100644
index 14e89eb4a..000000000
--- a/mdk-stage1/ppp/modules/if_ppp.c
+++ /dev/null
@@ -1,865 +0,0 @@
-/*
- * if_ppp.c - a network interface connected to a STREAMS module.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under SunOS 4 and Digital UNIX.
- *
- * This file provides the glue between PPP and IP.
- */
-
-#define INET 1
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/errno.h>
-#include <sys/mbuf.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <net/netisr.h>
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include <netinet/in.h>
-#include <netinet/in_var.h>
-#ifdef __osf__
-#include <sys/ioctl.h>
-#include <net/if_types.h>
-#else
-#include <sys/sockio.h>
-#endif
-#include "ppp_mod.h"
-
-#include <sys/stream.h>
-
-#ifdef SNIT_SUPPORT
-#include <sys/time.h>
-#include <net/nit_if.h>
-#include <netinet/if_ether.h>
-#endif
-
-#ifdef __osf__
-#define SIOCSIFMTU SIOCSIPMTU
-#define SIOCGIFMTU SIOCRIPMTU
-#define IFA_ADDR(ifa) (*(ifa)->ifa_addr)
-#else
-#define IFA_ADDR(ifa) ((ifa)->ifa_addr)
-#endif
-
-#define ifr_mtu ifr_metric
-
-static int if_ppp_open __P((queue_t *, int, int, int));
-static int if_ppp_close __P((queue_t *, int));
-static int if_ppp_wput __P((queue_t *, mblk_t *));
-static int if_ppp_rput __P((queue_t *, mblk_t *));
-
-#define PPP_IF_ID 0x8021
-static struct module_info minfo = {
- PPP_IF_ID, "if_ppp", 0, INFPSZ, 4096, 128
-};
-
-static struct qinit rinit = {
- if_ppp_rput, NULL, if_ppp_open, if_ppp_close, NULL, &minfo, NULL
-};
-
-static struct qinit winit = {
- if_ppp_wput, NULL, NULL, NULL, NULL, &minfo, NULL
-};
-
-struct streamtab if_pppinfo = {
- &rinit, &winit, NULL, NULL
-};
-
-typedef struct if_ppp_state {
- int unit;
- queue_t *q;
- int flags;
-} if_ppp_t;
-
-/* Values for flags */
-#define DBGLOG 1
-
-static int if_ppp_count; /* Number of currently-active streams */
-
-static int ppp_nalloc; /* Number of elements of ifs and states */
-static struct ifnet **ifs; /* Array of pointers to interface structs */
-static if_ppp_t **states; /* Array of pointers to state structs */
-
-static int if_ppp_output __P((struct ifnet *, struct mbuf *,
- struct sockaddr *));
-static int if_ppp_ioctl __P((struct ifnet *, u_int, caddr_t));
-static struct mbuf *make_mbufs __P((mblk_t *, int));
-static mblk_t *make_message __P((struct mbuf *, int));
-
-#ifdef SNIT_SUPPORT
-/* Fake ether header for SNIT */
-static struct ether_header snit_ehdr = {{0}, {0}, ETHERTYPE_IP};
-#endif
-
-#ifndef __osf__
-static void ppp_if_detach __P((struct ifnet *));
-
-/*
- * Detach all the interfaces before unloading.
- * Not sure this works.
- */
-int
-if_ppp_unload()
-{
- int i;
-
- if (if_ppp_count > 0)
- return EBUSY;
- for (i = 0; i < ppp_nalloc; ++i)
- if (ifs[i] != 0)
- ppp_if_detach(ifs[i]);
- if (ifs) {
- FREE(ifs, ppp_nalloc * sizeof (struct ifnet *));
- FREE(states, ppp_nalloc * sizeof (struct if_ppp_t *));
- }
- ppp_nalloc = 0;
- return 0;
-}
-#endif /* __osf__ */
-
-/*
- * STREAMS module entry points.
- */
-static int
-if_ppp_open(q, dev, flag, sflag)
- queue_t *q;
- int dev;
- int flag, sflag;
-{
- if_ppp_t *sp;
-
- if (q->q_ptr == 0) {
- sp = (if_ppp_t *) ALLOC_SLEEP(sizeof (if_ppp_t));
- if (sp == 0)
- return OPENFAIL;
- bzero(sp, sizeof (if_ppp_t));
- q->q_ptr = (caddr_t) sp;
- WR(q)->q_ptr = (caddr_t) sp;
- sp->unit = -1; /* no interface unit attached at present */
- sp->q = WR(q);
- sp->flags = 0;
- ++if_ppp_count;
- }
- return 0;
-}
-
-static int
-if_ppp_close(q, flag)
- queue_t *q;
- int flag;
-{
- if_ppp_t *sp;
- struct ifnet *ifp;
-
- sp = (if_ppp_t *) q->q_ptr;
- if (sp != 0) {
- if (sp->flags & DBGLOG)
- printf("if_ppp closed, q=%x sp=%x\n", q, sp);
- if (sp->unit >= 0) {
- if (sp->unit < ppp_nalloc) {
- states[sp->unit] = 0;
- ifp = ifs[sp->unit];
- if (ifp != 0)
- ifp->if_flags &= ~(IFF_UP | IFF_RUNNING);
-#ifdef DEBUG
- } else {
- printf("if_ppp: unit %d nonexistent!\n", sp->unit);
-#endif
- }
- }
- FREE(sp, sizeof (if_ppp_t));
- --if_ppp_count;
- }
- return 0;
-}
-
-static int
-if_ppp_wput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- if_ppp_t *sp;
- struct iocblk *iop;
- int error, unit;
- struct ifnet *ifp;
-
- sp = (if_ppp_t *) q->q_ptr;
- switch (mp->b_datap->db_type) {
- case M_DATA:
- /*
- * Now why would we be getting data coming in here??
- */
- if (sp->flags & DBGLOG)
- printf("if_ppp: got M_DATA len=%d\n", msgdsize(mp));
- freemsg(mp);
- break;
-
- case M_IOCTL:
- iop = (struct iocblk *) mp->b_rptr;
- error = EINVAL;
-
- if (sp->flags & DBGLOG)
- printf("if_ppp: got ioctl cmd=%x count=%d\n",
- iop->ioc_cmd, iop->ioc_count);
-
- switch (iop->ioc_cmd) {
- case PPPIO_NEWPPA: /* well almost */
- if (iop->ioc_count != sizeof(int) || sp->unit >= 0)
- break;
- if ((error = NOTSUSER()) != 0)
- break;
- unit = *(int *)mp->b_cont->b_rptr;
-
- /* Check that this unit isn't already in use */
- if (unit < ppp_nalloc && states[unit] != 0) {
- error = EADDRINUSE;
- break;
- }
-
- /* Extend ifs and states arrays if necessary. */
- error = ENOSR;
- if (unit >= ppp_nalloc) {
- int newn;
- struct ifnet **newifs;
- if_ppp_t **newstates;
-
- newn = unit + 4;
- if (sp->flags & DBGLOG)
- printf("if_ppp: extending ifs to %d\n", newn);
- newifs = (struct ifnet **)
- ALLOC_NOSLEEP(newn * sizeof (struct ifnet *));
- if (newifs == 0)
- break;
- bzero(newifs, newn * sizeof (struct ifnet *));
- newstates = (if_ppp_t **)
- ALLOC_NOSLEEP(newn * sizeof (struct if_ppp_t *));
- if (newstates == 0) {
- FREE(newifs, newn * sizeof (struct ifnet *));
- break;
- }
- bzero(newstates, newn * sizeof (struct if_ppp_t *));
- bcopy(ifs, newifs, ppp_nalloc * sizeof(struct ifnet *));
- bcopy(states, newstates, ppp_nalloc * sizeof(if_ppp_t *));
- if (ifs) {
- FREE(ifs, ppp_nalloc * sizeof(struct ifnet *));
- FREE(states, ppp_nalloc * sizeof(if_ppp_t *));
- }
- ifs = newifs;
- states = newstates;
- ppp_nalloc = newn;
- }
-
- /* Allocate a new ifnet struct if necessary. */
- ifp = ifs[unit];
- if (ifp == 0) {
- ifp = (struct ifnet *) ALLOC_NOSLEEP(sizeof (struct ifnet));
- if (ifp == 0)
- break;
- bzero(ifp, sizeof (struct ifnet));
- ifs[unit] = ifp;
- ifp->if_name = "ppp";
- ifp->if_unit = unit;
- ifp->if_mtu = PPP_MTU;
- ifp->if_flags = IFF_POINTOPOINT | IFF_RUNNING;
-#ifndef __osf__
-#ifdef IFF_MULTICAST
- ifp->if_flags |= IFF_MULTICAST;
-#endif
-#endif /* __osf__ */
- ifp->if_output = if_ppp_output;
-#ifdef __osf__
- ifp->if_version = "Point-to-Point Protocol, version 2.3.11";
- ifp->if_mediamtu = PPP_MTU;
- ifp->if_type = IFT_PPP;
- ifp->if_hdrlen = PPP_HDRLEN;
- ifp->if_addrlen = 0;
- ifp->if_flags |= IFF_NOARP | IFF_SIMPLEX | IFF_NOTRAILERS;
-#ifdef IFF_VAR_MTU
- ifp->if_flags |= IFF_VAR_MTU;
-#endif
-#ifdef NETMASTERCPU
- ifp->if_affinity = NETMASTERCPU;
-#endif
-#endif
- ifp->if_ioctl = if_ppp_ioctl;
- ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
- if_attach(ifp);
- if (sp->flags & DBGLOG)
- printf("if_ppp: created unit %d\n", unit);
- } else {
- ifp->if_mtu = PPP_MTU;
- ifp->if_flags |= IFF_RUNNING;
- }
-
- states[unit] = sp;
- sp->unit = unit;
-
- error = 0;
- iop->ioc_count = 0;
- if (sp->flags & DBGLOG)
- printf("if_ppp: attached unit %d, sp=%x q=%x\n", unit,
- sp, sp->q);
- break;
-
- case PPPIO_DEBUG:
- error = -1;
- if (iop->ioc_count == sizeof(int)) {
- if (*(int *)mp->b_cont->b_rptr == PPPDBG_LOG + PPPDBG_IF) {
- printf("if_ppp: debug log enabled, q=%x sp=%x\n", q, sp);
- sp->flags |= DBGLOG;
- error = 0;
- iop->ioc_count = 0;
- }
- }
- break;
-
- default:
- error = -1;
- break;
- }
-
- if (sp->flags & DBGLOG)
- printf("if_ppp: ioctl result %d\n", error);
- if (error < 0)
- putnext(q, mp);
- else if (error == 0) {
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
- } else {
- mp->b_datap->db_type = M_IOCNAK;
- iop->ioc_count = 0;
- iop->ioc_error = error;
- qreply(q, mp);
- }
- break;
-
- default:
- putnext(q, mp);
- }
- return 0;
-}
-
-static int
-if_ppp_rput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- if_ppp_t *sp;
- int proto, s;
- struct mbuf *mb;
- struct ifqueue *inq;
- struct ifnet *ifp;
- int len;
-
- sp = (if_ppp_t *) q->q_ptr;
- switch (mp->b_datap->db_type) {
- case M_DATA:
- /*
- * Convert the message into an mbuf chain
- * and inject it into the network code.
- */
- if (sp->flags & DBGLOG)
- printf("if_ppp: rput pkt len %d data %x %x %x %x %x %x %x %x\n",
- msgdsize(mp), mp->b_rptr[0], mp->b_rptr[1], mp->b_rptr[2],
- mp->b_rptr[3], mp->b_rptr[4], mp->b_rptr[5], mp->b_rptr[6],
- mp->b_rptr[7]);
-
- if (sp->unit < 0) {
- freemsg(mp);
- break;
- }
- if (sp->unit >= ppp_nalloc || (ifp = ifs[sp->unit]) == 0) {
-#ifdef DEBUG
- printf("if_ppp: no unit %d!\n", sp->unit);
-#endif
- freemsg(mp);
- break;
- }
-
- if ((ifp->if_flags & IFF_UP) == 0) {
- freemsg(mp);
- break;
- }
- ++ifp->if_ipackets;
-
- proto = PPP_PROTOCOL(mp->b_rptr);
- adjmsg(mp, PPP_HDRLEN);
- len = msgdsize(mp);
- mb = make_mbufs(mp, sizeof(struct ifnet *));
- freemsg(mp);
- if (mb == NULL) {
- if (sp->flags & DBGLOG)
- printf("if_ppp%d: make_mbufs failed\n", ifp->if_unit);
- ++ifp->if_ierrors;
- break;
- }
-
-#ifdef SNIT_SUPPORT
- if (proto == PPP_IP && (ifp->if_flags & IFF_PROMISC)) {
- struct nit_if nif;
-
- nif.nif_header = (caddr_t) &snit_ehdr;
- nif.nif_hdrlen = sizeof(snit_ehdr);
- nif.nif_bodylen = len;
- nif.nif_promisc = 0;
- snit_intr(ifp, mb, &nif);
- }
-#endif
-
-/*
- * For Digital UNIX, there's space set aside in the header mbuf
- * for the interface info.
- *
- * For Sun it's smuggled around via a pointer at the front of the mbuf.
- */
-#ifdef __osf__
- mb->m_pkthdr.rcvif = ifp;
- mb->m_pkthdr.len = len;
-#else
- mb->m_off -= sizeof(struct ifnet *);
- mb->m_len += sizeof(struct ifnet *);
- *mtod(mb, struct ifnet **) = ifp;
-#endif
-
- inq = 0;
- switch (proto) {
- case PPP_IP:
- inq = &ipintrq;
- schednetisr(NETISR_IP);
- }
-
- if (inq != 0) {
- s = splhigh();
- if (IF_QFULL(inq)) {
- IF_DROP(inq);
- ++ifp->if_ierrors;
- if (sp->flags & DBGLOG)
- printf("if_ppp: inq full, proto=%x\n", proto);
- m_freem(mb);
- } else {
- IF_ENQUEUE(inq, mb);
- }
- splx(s);
- } else {
- if (sp->flags & DBGLOG)
- printf("if_ppp%d: proto=%x?\n", ifp->if_unit, proto);
- ++ifp->if_ierrors;
- m_freem(mb);
- }
- break;
-
- default:
- putnext(q, mp);
- }
- return 0;
-}
-
-/*
- * Network code wants to output a packet.
- * Turn it into a STREAMS message and send it down.
- */
-static int
-if_ppp_output(ifp, m0, dst)
- struct ifnet *ifp;
- struct mbuf *m0;
- struct sockaddr *dst;
-{
- mblk_t *mp;
- int proto, s;
- if_ppp_t *sp;
- u_char *p;
-
- if ((ifp->if_flags & IFF_UP) == 0) {
- m_freem(m0);
- return ENETDOWN;
- }
-
- if ((unsigned)ifp->if_unit >= ppp_nalloc) {
-#ifdef DEBUG
- printf("if_ppp_output: unit %d?\n", ifp->if_unit);
-#endif
- m_freem(m0);
- return EINVAL;
- }
- sp = states[ifp->if_unit];
- if (sp == 0) {
-#ifdef DEBUG
- printf("if_ppp_output: no queue?\n");
-#endif
- m_freem(m0);
- return ENETDOWN;
- }
-
- if (sp->flags & DBGLOG) {
- p = mtod(m0, u_char *);
- printf("if_ppp_output%d: af=%d data=%x %x %x %x %x %x %x %x q=%x\n",
- ifp->if_unit, dst->sa_family, p[0], p[1], p[2], p[3], p[4],
- p[5], p[6], p[7], sp->q);
- }
-
- switch (dst->sa_family) {
- case AF_INET:
- proto = PPP_IP;
-#ifdef SNIT_SUPPORT
- if (ifp->if_flags & IFF_PROMISC) {
- struct nit_if nif;
- struct mbuf *m;
- int len;
-
- for (len = 0, m = m0; m != NULL; m = m->m_next)
- len += m->m_len;
- nif.nif_header = (caddr_t) &snit_ehdr;
- nif.nif_hdrlen = sizeof(snit_ehdr);
- nif.nif_bodylen = len;
- nif.nif_promisc = 0;
- snit_intr(ifp, m0, &nif);
- }
-#endif
- break;
-
- default:
- m_freem(m0);
- return EAFNOSUPPORT;
- }
-
- ++ifp->if_opackets;
- mp = make_message(m0, PPP_HDRLEN);
- m_freem(m0);
- if (mp == 0) {
- ++ifp->if_oerrors;
- return ENOBUFS;
- }
- mp->b_rptr -= PPP_HDRLEN;
- mp->b_rptr[0] = PPP_ALLSTATIONS;
- mp->b_rptr[1] = PPP_UI;
- mp->b_rptr[2] = proto >> 8;
- mp->b_rptr[3] = proto;
-
- s = splstr();
- if (sp->flags & DBGLOG)
- printf("if_ppp: putnext(%x, %x), r=%x w=%x p=%x\n",
- sp->q, mp, mp->b_rptr, mp->b_wptr, proto);
- putnext(sp->q, mp);
- splx(s);
-
- return 0;
-}
-
-/*
- * Socket ioctl routine for ppp interfaces.
- */
-static int
-if_ppp_ioctl(ifp, cmd, data)
- struct ifnet *ifp;
- u_int cmd;
- caddr_t data;
-{
- int s, error;
- struct ifreq *ifr = (struct ifreq *) data;
- struct ifaddr *ifa = (struct ifaddr *) data;
- u_short mtu;
-
- error = 0;
- s = splimp();
- switch (cmd) {
- case SIOCSIFFLAGS:
- if ((ifp->if_flags & IFF_RUNNING) == 0)
- ifp->if_flags &= ~IFF_UP;
- break;
-
- case SIOCSIFADDR:
- if (IFA_ADDR(ifa).sa_family != AF_INET)
- error = EAFNOSUPPORT;
- break;
-
- case SIOCSIFDSTADDR:
- if (IFA_ADDR(ifa).sa_family != AF_INET)
- error = EAFNOSUPPORT;
- break;
-
- case SIOCSIFMTU:
- if ((error = NOTSUSER()) != 0)
- break;
-#ifdef __osf__
- /* this hack is necessary because ifioctl checks ifr_data
- * in 4.0 and 5.0, but ifr_data and ifr_metric overlay each
- * other in the definition of struct ifreq so pppd can't set both.
- */
- bcopy(ifr->ifr_data, &mtu, sizeof (u_short));
- ifr->ifr_mtu = mtu;
-#endif
-
- if (ifr->ifr_mtu < PPP_MINMTU || ifr->ifr_mtu > PPP_MAXMTU) {
- error = EINVAL;
- break;
- }
- ifp->if_mtu = ifr->ifr_mtu;
- break;
-
- case SIOCGIFMTU:
- ifr->ifr_mtu = ifp->if_mtu;
- break;
-
- case SIOCADDMULTI:
- case SIOCDELMULTI:
- switch(ifr->ifr_addr.sa_family) {
- case AF_INET:
- break;
- default:
- error = EAFNOSUPPORT;
- break;
- }
- break;
-
- default:
- error = EINVAL;
- }
- splx(s);
- return (error);
-}
-
-/*
- * Turn a STREAMS message into an mbuf chain.
- */
-static struct mbuf *
-make_mbufs(mp, off)
- mblk_t *mp;
- int off;
-{
- struct mbuf *head, **prevp, *m;
- int len, space, n;
- unsigned char *cp, *dp;
-
- len = msgdsize(mp);
- if (len == 0)
- return 0;
- prevp = &head;
- space = 0;
- cp = mp->b_rptr;
-#ifdef __osf__
- MGETHDR(m, M_DONTWAIT, MT_DATA);
- m->m_len = 0;
- space = MHLEN;
- *prevp = m;
- prevp = &m->m_next;
- dp = mtod(m, unsigned char *);
- len -= space;
- off = 0;
-#endif
- for (;;) {
- while (cp >= mp->b_wptr) {
- mp = mp->b_cont;
- if (mp == 0) {
- *prevp = 0;
- return head;
- }
- cp = mp->b_rptr;
- }
- n = mp->b_wptr - cp;
- if (space == 0) {
- MGET(m, M_DONTWAIT, MT_DATA);
- *prevp = m;
- if (m == 0) {
- if (head != 0)
- m_freem(head);
- return 0;
- }
- if (len + off > 2 * MLEN) {
-#ifdef __osf__
- MCLGET(m, M_DONTWAIT);
-#else
- MCLGET(m);
-#endif
- }
-#ifdef __osf__
- space = ((m->m_flags & M_EXT) ? MCLBYTES : MLEN);
-#else
- space = (m->m_off > MMAXOFF? MCLBYTES: MLEN) - off;
- m->m_off += off;
-#endif
- m->m_len = 0;
- len -= space;
- dp = mtod(m, unsigned char *);
- off = 0;
- prevp = &m->m_next;
- }
- if (n > space)
- n = space;
- bcopy(cp, dp, n);
- cp += n;
- dp += n;
- space -= n;
- m->m_len += n;
- }
-}
-
-/*
- * Turn an mbuf chain into a STREAMS message.
- */
-#define ALLOCB_MAX 4096
-
-static mblk_t *
-make_message(m, off)
- struct mbuf *m;
- int off;
-{
- mblk_t *head, **prevp, *mp;
- int len, space, n, nb;
- unsigned char *cp, *dp;
- struct mbuf *nm;
-
- len = 0;
- for (nm = m; nm != 0; nm = nm->m_next)
- len += nm->m_len;
- prevp = &head;
- space = 0;
- cp = mtod(m, unsigned char *);
- nb = m->m_len;
- for (;;) {
- while (nb <= 0) {
- m = m->m_next;
- if (m == 0) {
- *prevp = 0;
- return head;
- }
- cp = mtod(m, unsigned char *);
- nb = m->m_len;
- }
- if (space == 0) {
- space = len + off;
- if (space > ALLOCB_MAX)
- space = ALLOCB_MAX;
- mp = allocb(space, BPRI_LO);
- *prevp = mp;
- if (mp == 0) {
- if (head != 0)
- freemsg(head);
- return 0;
- }
- dp = mp->b_rptr += off;
- space -= off;
- len -= space;
- off = 0;
- prevp = &mp->b_cont;
- }
- n = nb < space? nb: space;
- bcopy(cp, dp, n);
- cp += n;
- dp += n;
- nb -= n;
- space -= n;
- mp->b_wptr = dp;
- }
-}
-
-/*
- * Digital UNIX doesn't allow for removing ifnet structures
- * from the list. But then we're not using this as a loadable
- * module anyway, so that's OK.
- *
- * Under SunOS, this should allow the module to be unloaded.
- * Unfortunately, it doesn't seem to detach all the references,
- * so your system may well crash after you unload this module :-(
- */
-#ifndef __osf__
-
-/*
- * Remove an interface from the system.
- * This routine contains magic.
- */
-#include <net/route.h>
-#include <netinet/in_pcb.h>
-#include <netinet/ip_var.h>
-#include <netinet/tcp.h>
-#include <netinet/tcp_timer.h>
-#include <netinet/tcp_var.h>
-#include <netinet/udp.h>
-#include <netinet/udp_var.h>
-
-static void
-ppp_if_detach(ifp)
- struct ifnet *ifp;
-{
- int s;
- struct inpcb *pcb;
- struct ifaddr *ifa;
- struct in_ifaddr **inap;
- struct ifnet **ifpp;
-
- s = splhigh();
-
- /*
- * Clear the interface from any routes currently cached in
- * TCP or UDP protocol control blocks.
- */
- for (pcb = tcb.inp_next; pcb != &tcb; pcb = pcb->inp_next)
- if (pcb->inp_route.ro_rt && pcb->inp_route.ro_rt->rt_ifp == ifp)
- in_losing(pcb);
- for (pcb = udb.inp_next; pcb != &udb; pcb = pcb->inp_next)
- if (pcb->inp_route.ro_rt && pcb->inp_route.ro_rt->rt_ifp == ifp)
- in_losing(pcb);
-
- /*
- * Delete routes through all addresses of the interface.
- */
- for (ifa = ifp->if_addrlist; ifa != 0; ifa = ifa->ifa_next) {
- rtinit(ifa, ifa, SIOCDELRT, RTF_HOST);
- rtinit(ifa, ifa, SIOCDELRT, 0);
- }
-
- /*
- * Unlink the interface's address(es) from the in_ifaddr list.
- */
- for (inap = &in_ifaddr; *inap != 0; ) {
- if ((*inap)->ia_ifa.ifa_ifp == ifp)
- *inap = (*inap)->ia_next;
- else
- inap = &(*inap)->ia_next;
- }
-
- /*
- * Delete the interface from the ifnet list.
- */
- for (ifpp = &ifnet; (*ifpp) != 0; ) {
- if (*ifpp == ifp)
- break;
- ifpp = &(*ifpp)->if_next;
- }
- if (*ifpp == 0)
- printf("couldn't find interface ppp%d in ifnet list\n", ifp->if_unit);
- else
- *ifpp = ifp->if_next;
-
- splx(s);
-}
-
-#endif /* __osf__ */
diff --git a/mdk-stage1/ppp/modules/ppp.c b/mdk-stage1/ppp/modules/ppp.c
deleted file mode 100644
index 44bf08dff..000000000
--- a/mdk-stage1/ppp/modules/ppp.c
+++ /dev/null
@@ -1,2486 +0,0 @@
-/*
- * ppp.c - STREAMS multiplexing pseudo-device driver for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/errno.h>
-#ifdef __osf__
-#include <sys/ioctl.h>
-#include <sys/cmn_err.h>
-#define queclass(mp) ((mp)->b_band & QPCTL)
-#else
-#include <sys/ioccom.h>
-#endif
-#include <sys/time.h>
-#ifdef SVR4
-#include <sys/cmn_err.h>
-#include <sys/conf.h>
-#include <sys/dlpi.h>
-#include <sys/ddi.h>
-#ifdef SOL2
-#include <sys/ksynch.h>
-#include <sys/kstat.h>
-#include <sys/sunddi.h>
-#include <sys/ethernet.h>
-#else
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <net/if.h>
-#include <netinet/in.h>
-#endif /* SOL2 */
-#else /* not SVR4 */
-#include <sys/user.h>
-#endif /* SVR4 */
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Modifications marked with #ifdef PRIOQ are for priority queueing of
- * interactive traffic, and are due to Marko Zec <zec@japa.tel.fer.hr>.
- */
-#ifdef PRIOQ
-#endif /* PRIOQ */
-
-#include <netinet/in.h> /* leave this outside of PRIOQ for htons */
-
-#ifdef __STDC__
-#define __P(x) x
-#else
-#define __P(x) ()
-#endif
-
-/*
- * The IP module may use this SAP value for IP packets.
- */
-#ifndef ETHERTYPE_IP
-#define ETHERTYPE_IP 0x800
-#endif
-
-#if !defined(ETHERTYPE_IPV6)
-#define ETHERTYPE_IPV6 0x86dd
-#endif /* !defined(ETHERTYPE_IPV6) */
-
-#if !defined(ETHERTYPE_ALLSAP) && defined(SOL2)
-#define ETHERTYPE_ALLSAP 0
-#endif /* !defined(ETHERTYPE_ALLSAP) && defined(SOL2) */
-
-#if !defined(PPP_ALLSAP) && defined(SOL2)
-#define PPP_ALLSAP PPP_ALLSTATIONS
-#endif /* !defined(PPP_ALLSAP) && defined(SOL2) */
-
-extern time_t time;
-
-#ifdef SOL2
-/*
- * We use this reader-writer lock to ensure that the lower streams
- * stay connected to the upper streams while the lower-side put and
- * service procedures are running. Essentially it is an existence
- * lock for the upper stream associated with each lower stream.
- */
-krwlock_t ppp_lower_lock;
-#define LOCK_LOWER_W rw_enter(&ppp_lower_lock, RW_WRITER)
-#define LOCK_LOWER_R rw_enter(&ppp_lower_lock, RW_READER)
-#define TRYLOCK_LOWER_R rw_tryenter(&ppp_lower_lock, RW_READER)
-#define UNLOCK_LOWER rw_exit(&ppp_lower_lock)
-
-#define MT_ENTER(x) mutex_enter(x)
-#define MT_EXIT(x) mutex_exit(x)
-
-/*
- * Notes on multithreaded implementation for Solaris 2:
- *
- * We use an inner perimeter around each queue pair and an outer
- * perimeter around the whole driver. The inner perimeter is
- * entered exclusively for all entry points (open, close, put,
- * service). The outer perimeter is entered exclusively for open
- * and close and shared for put and service. This is all done for
- * us by the streams framework.
- *
- * I used to think that the perimeters were entered for the lower
- * streams' put and service routines as well as for the upper streams'.
- * Because of problems experienced by people, and after reading the
- * documentation more closely, I now don't think that is true. So we
- * now use ppp_lower_lock to give us an existence guarantee on the
- * upper stream controlling each lower stream.
- *
- * Shared entry to the outer perimeter protects the existence of all
- * the upper streams and their upperstr_t structures, and guarantees
- * that the following fields of any upperstr_t won't change:
- * nextmn, next, nextppa. It guarantees that the lowerq field of an
- * upperstr_t won't go from non-zero to zero, that the global `ppas'
- * won't change and that the no lower stream will get unlinked.
- *
- * Shared (reader) access to ppa_lower_lock guarantees that no lower
- * stream will be unlinked and that the lowerq field of all upperstr_t
- * structures won't change.
- */
-
-#else /* SOL2 */
-#define LOCK_LOWER_W 0
-#define LOCK_LOWER_R 0
-#define TRYLOCK_LOWER_R 1
-#define UNLOCK_LOWER 0
-#define MT_ENTER(x) 0
-#define MT_EXIT(x) 0
-
-#endif /* SOL2 */
-
-/*
- * Private information; one per upper stream.
- */
-typedef struct upperstr {
- minor_t mn; /* minor device number */
- struct upperstr *nextmn; /* next minor device */
- queue_t *q; /* read q associated with this upper stream */
- int flags; /* flag bits, see below */
- int state; /* current DLPI state */
- int sap; /* service access point */
- int req_sap; /* which SAP the DLPI client requested */
- struct upperstr *ppa; /* control stream for our ppa */
- struct upperstr *next; /* next stream for this ppa */
- uint ioc_id; /* last ioctl ID for this stream */
- enum NPmode npmode; /* what to do with packets on this SAP */
- unsigned char rblocked; /* flow control has blocked upper read strm */
- /* N.B. rblocked is only changed by control stream's put/srv procs */
- /*
- * There is exactly one control stream for each PPA.
- * The following fields are only used for control streams.
- */
- int ppa_id;
- queue_t *lowerq; /* write queue attached below this PPA */
- struct upperstr *nextppa; /* next control stream */
- int mru;
- int mtu;
- struct pppstat stats; /* statistics */
- time_t last_sent; /* time last NP packet sent */
- time_t last_recv; /* time last NP packet rcvd */
-#ifdef SOL2
- kmutex_t stats_lock; /* lock for stats updates */
- kstat_t *kstats; /* stats for netstat */
-#endif /* SOL2 */
-#ifdef LACHTCP
- int ifflags;
- char ifname[IFNAMSIZ];
- struct ifstats ifstats;
-#endif /* LACHTCP */
-} upperstr_t;
-
-/* Values for flags */
-#define US_PRIV 1 /* stream was opened by superuser */
-#define US_CONTROL 2 /* stream is a control stream */
-#define US_BLOCKED 4 /* flow ctrl has blocked lower write stream */
-#define US_LASTMOD 8 /* no PPP modules below us */
-#define US_DBGLOG 0x10 /* log various occurrences */
-#define US_RBLOCKED 0x20 /* flow ctrl has blocked upper read stream */
-
-#if defined(SOL2)
-#if DL_CURRENT_VERSION >= 2
-#define US_PROMISC 0x40 /* stream is promiscuous */
-#endif /* DL_CURRENT_VERSION >= 2 */
-#define US_RAWDATA 0x80 /* raw M_DATA, no DLPI header */
-#endif /* defined(SOL2) */
-
-#ifdef PRIOQ
-static u_char max_band=0;
-static u_char def_band=0;
-
-#define IPPORT_DEFAULT 65535
-
-/*
- * Port priority table
- * Highest priority ports are listed first, lowest are listed last.
- * ICMP & packets using unlisted ports will be treated as "default".
- * If IPPORT_DEFAULT is not listed here, "default" packets will be
- * assigned lowest priority.
- * Each line should be terminated with "0".
- * Line containing only "0" marks the end of the list.
- */
-
-static u_short prioq_table[]= {
- 113, 53, 0,
- 22, 23, 513, 517, 518, 0,
- 514, 21, 79, 111, 0,
- 25, 109, 110, 0,
- IPPORT_DEFAULT, 0,
- 20, 70, 80, 8001, 8008, 8080, 0, /* 8001,8008,8080 - common proxy ports */
-0 };
-
-#endif /* PRIOQ */
-
-
-static upperstr_t *minor_devs = NULL;
-static upperstr_t *ppas = NULL;
-
-#ifdef SVR4
-static int pppopen __P((queue_t *, dev_t *, int, int, cred_t *));
-static int pppclose __P((queue_t *, int, cred_t *));
-#else
-static int pppopen __P((queue_t *, int, int, int));
-static int pppclose __P((queue_t *, int));
-#endif /* SVR4 */
-static int pppurput __P((queue_t *, mblk_t *));
-static int pppuwput __P((queue_t *, mblk_t *));
-static int pppursrv __P((queue_t *));
-static int pppuwsrv __P((queue_t *));
-static int ppplrput __P((queue_t *, mblk_t *));
-static int ppplwput __P((queue_t *, mblk_t *));
-static int ppplrsrv __P((queue_t *));
-static int ppplwsrv __P((queue_t *));
-#ifndef NO_DLPI
-static void dlpi_request __P((queue_t *, mblk_t *, upperstr_t *));
-static void dlpi_error __P((queue_t *, upperstr_t *, int, int, int));
-static void dlpi_ok __P((queue_t *, int));
-#endif
-static int send_data __P((mblk_t *, upperstr_t *));
-static void new_ppa __P((queue_t *, mblk_t *));
-static void attach_ppa __P((queue_t *, mblk_t *));
-static void detach_ppa __P((queue_t *, mblk_t *));
-static void detach_lower __P((queue_t *, mblk_t *));
-static void debug_dump __P((queue_t *, mblk_t *));
-static upperstr_t *find_dest __P((upperstr_t *, int));
-#if defined(SOL2)
-static upperstr_t *find_promisc __P((upperstr_t *, int));
-static mblk_t *prepend_ether __P((upperstr_t *, mblk_t *, int));
-static mblk_t *prepend_udind __P((upperstr_t *, mblk_t *, int));
-static void promisc_sendup __P((upperstr_t *, mblk_t *, int, int));
-#endif /* defined(SOL2) */
-static int putctl2 __P((queue_t *, int, int, int));
-static int putctl4 __P((queue_t *, int, int, int));
-static int pass_packet __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#ifdef FILTER_PACKETS
-static int ip_hard_filter __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#endif /* FILTER_PACKETS */
-
-#define PPP_ID 0xb1a6
-static struct module_info ppp_info = {
-#ifdef PRIOQ
- PPP_ID, "ppp", 0, 512, 512, 384
-#else
- PPP_ID, "ppp", 0, 512, 512, 128
-#endif /* PRIOQ */
-};
-
-static struct qinit pppurint = {
- pppurput, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL
-};
-
-static struct qinit pppuwint = {
- pppuwput, pppuwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplrint = {
- ppplrput, ppplrsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplwint = {
- ppplwput, ppplwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-#ifdef LACHTCP
-extern struct ifstats *ifstats;
-int pppdevflag = 0;
-#endif
-
-struct streamtab pppinfo = {
- &pppurint, &pppuwint,
- &ppplrint, &ppplwint
-};
-
-int ppp_count;
-
-/*
- * How we maintain statistics.
- */
-#ifdef SOL2
-#define INCR_IPACKETS(ppa) \
- if (ppa->kstats != 0) { \
- KSTAT_NAMED_PTR(ppa->kstats)[0].value.ul++; \
- }
-#define INCR_IERRORS(ppa) \
- if (ppa->kstats != 0) { \
- KSTAT_NAMED_PTR(ppa->kstats)[1].value.ul++; \
- }
-#define INCR_OPACKETS(ppa) \
- if (ppa->kstats != 0) { \
- KSTAT_NAMED_PTR(ppa->kstats)[2].value.ul++; \
- }
-#define INCR_OERRORS(ppa) \
- if (ppa->kstats != 0) { \
- KSTAT_NAMED_PTR(ppa->kstats)[3].value.ul++; \
- }
-#endif
-
-#ifdef LACHTCP
-#define INCR_IPACKETS(ppa) ppa->ifstats.ifs_ipackets++;
-#define INCR_IERRORS(ppa) ppa->ifstats.ifs_ierrors++;
-#define INCR_OPACKETS(ppa) ppa->ifstats.ifs_opackets++;
-#define INCR_OERRORS(ppa) ppa->ifstats.ifs_oerrors++;
-#endif
-
-/*
- * STREAMS driver entry points.
- */
-static int
-#ifdef SVR4
-pppopen(q, devp, oflag, sflag, credp)
- queue_t *q;
- dev_t *devp;
- int oflag, sflag;
- cred_t *credp;
-#else
-pppopen(q, dev, oflag, sflag)
- queue_t *q;
- int dev; /* really dev_t */
- int oflag, sflag;
-#endif
-{
- upperstr_t *up;
- upperstr_t **prevp;
- minor_t mn;
-#ifdef PRIOQ
- u_short *ptr;
- u_char new_band;
-#endif /* PRIOQ */
-
- if (q->q_ptr)
- DRV_OPEN_OK(dev); /* device is already open */
-
-#ifdef PRIOQ
- /* Calculate max_bband & def_band from definitions in prioq.h
- This colud be done at some more approtiate time (less often)
- but this way it works well so I'll just leave it here */
-
- max_band = 1;
- def_band = 0;
- ptr = prioq_table;
- while (*ptr) {
- new_band = 1;
- while (*ptr)
- if (*ptr++ == IPPORT_DEFAULT) {
- new_band = 0;
- def_band = max_band;
- }
- max_band += new_band;
- ptr++;
- }
- if (def_band)
- def_band = max_band - def_band;
- --max_band;
-#endif /* PRIOQ */
-
- if (sflag == CLONEOPEN) {
- mn = 0;
- for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
- if (up->mn != mn)
- break;
- ++mn;
- }
- } else {
-#ifdef SVR4
- mn = getminor(*devp);
-#else
- mn = minor(dev);
-#endif
- for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
- if (up->mn >= mn)
- break;
- }
- if (up->mn == mn) {
- /* this can't happen */
- q->q_ptr = WR(q)->q_ptr = (caddr_t) up;
- DRV_OPEN_OK(dev);
- }
- }
-
- /*
- * Construct a new minor node.
- */
- up = (upperstr_t *) ALLOC_SLEEP(sizeof(upperstr_t));
- bzero((caddr_t) up, sizeof(upperstr_t));
- if (up == 0) {
- DPRINT("pppopen: out of kernel memory\n");
- OPEN_ERROR(ENXIO);
- }
- up->nextmn = *prevp;
- *prevp = up;
- up->mn = mn;
-#ifdef SVR4
- *devp = makedevice(getmajor(*devp), mn);
-#endif
- up->q = q;
- if (NOTSUSER() == 0)
- up->flags |= US_PRIV;
-#ifndef NO_DLPI
- up->state = DL_UNATTACHED;
-#endif
-#ifdef LACHTCP
- up->ifflags = IFF_UP | IFF_POINTOPOINT;
-#endif
- up->sap = -1;
- up->last_sent = up->last_recv = time;
- up->npmode = NPMODE_DROP;
- q->q_ptr = (caddr_t) up;
- WR(q)->q_ptr = (caddr_t) up;
- noenable(WR(q));
-#ifdef SOL2
- mutex_init(&up->stats_lock, NULL, MUTEX_DRIVER, NULL);
-#endif
- ++ppp_count;
-
- qprocson(q);
- DRV_OPEN_OK(makedev(major(dev), mn));
-}
-
-static int
-#ifdef SVR4
-pppclose(q, flag, credp)
- queue_t *q;
- int flag;
- cred_t *credp;
-#else
-pppclose(q, flag)
- queue_t *q;
- int flag;
-#endif
-{
- upperstr_t *up, **upp;
- upperstr_t *as, *asnext;
- upperstr_t **prevp;
-
- qprocsoff(q);
-
- up = (upperstr_t *) q->q_ptr;
- if (up == 0) {
- DPRINT("pppclose: q_ptr = 0\n");
- return 0;
- }
- if (up->flags & US_DBGLOG)
- DPRINT2("ppp/%d: close, flags=%x\n", up->mn, up->flags);
- if (up->flags & US_CONTROL) {
-#ifdef LACHTCP
- struct ifstats *ifp, *pifp;
-#endif
- if (up->lowerq != 0) {
- /* Gack! the lower stream should have be unlinked earlier! */
- DPRINT1("ppp%d: lower stream still connected on close?\n",
- up->mn);
- LOCK_LOWER_W;
- up->lowerq->q_ptr = 0;
- RD(up->lowerq)->q_ptr = 0;
- up->lowerq = 0;
- UNLOCK_LOWER;
- }
-
- /*
- * This stream represents a PPA:
- * For all streams attached to the PPA, clear their
- * references to this PPA.
- * Then remove this PPA from the list of PPAs.
- */
- for (as = up->next; as != 0; as = asnext) {
- asnext = as->next;
- as->next = 0;
- as->ppa = 0;
- if (as->flags & US_BLOCKED) {
- as->flags &= ~US_BLOCKED;
- flushq(WR(as->q), FLUSHDATA);
- }
- }
- for (upp = &ppas; *upp != 0; upp = &(*upp)->nextppa)
- if (*upp == up) {
- *upp = up->nextppa;
- break;
- }
-#ifdef LACHTCP
- /* Remove the statistics from the active list. */
- for (ifp = ifstats, pifp = 0; ifp; ifp = ifp->ifs_next) {
- if (ifp == &up->ifstats) {
- if (pifp)
- pifp->ifs_next = ifp->ifs_next;
- else
- ifstats = ifp->ifs_next;
- break;
- }
- pifp = ifp;
- }
-#endif
- } else {
- /*
- * If this stream is attached to a PPA,
- * remove it from the PPA's list.
- */
- if ((as = up->ppa) != 0) {
- for (; as->next != 0; as = as->next)
- if (as->next == up) {
- as->next = up->next;
- break;
- }
- }
- }
-
-#ifdef SOL2
- if (up->kstats)
- kstat_delete(up->kstats);
- mutex_destroy(&up->stats_lock);
-#endif
-
- q->q_ptr = NULL;
- WR(q)->q_ptr = NULL;
-
- for (prevp = &minor_devs; *prevp != 0; prevp = &(*prevp)->nextmn) {
- if (*prevp == up) {
- *prevp = up->nextmn;
- break;
- }
- }
- FREE(up, sizeof(upperstr_t));
- --ppp_count;
-
- return 0;
-}
-
-/*
- * A message from on high. We do one of three things:
- * - qreply()
- * - put the message on the lower write stream
- * - queue it for our service routine
- */
-static int
-pppuwput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us, *ppa, *nps;
- struct iocblk *iop;
- struct linkblk *lb;
-#ifdef LACHTCP
- struct ifreq *ifr;
- int i;
-#endif
- queue_t *lq;
- int error, n, sap;
- mblk_t *mq;
- struct ppp_idle *pip;
-#ifdef PRIOQ
- queue_t *tlq;
-#endif /* PRIOQ */
-#ifdef NO_DLPI
- upperstr_t *os;
-#endif
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("pppuwput: q_ptr = 0!\n");
- return 0;
- }
- if (mp == 0) {
- DPRINT1("pppuwput/%d: mp = 0!\n", us->mn);
- return 0;
- }
- if (mp->b_datap == 0) {
- DPRINT1("pppuwput/%d: mp->b_datap = 0!\n", us->mn);
- return 0;
- }
- switch (mp->b_datap->db_type) {
-#ifndef NO_DLPI
- case M_PCPROTO:
- case M_PROTO:
- dlpi_request(q, mp, us);
- break;
-#endif /* NO_DLPI */
-
- case M_DATA:
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: uwput M_DATA len=%d flags=%x\n",
- us->mn, msgdsize(mp), us->flags);
- if (us->ppa == 0 || msgdsize(mp) > us->ppa->mtu + PPP_HDRLEN
-#ifndef NO_DLPI
- || (us->flags & US_CONTROL) == 0
-#endif /* NO_DLPI */
- ) {
- DPRINT1("pppuwput: junk data len=%d\n", msgdsize(mp));
- freemsg(mp);
- break;
- }
-#ifdef NO_DLPI
- if ((us->flags & US_CONTROL) == 0 && !pass_packet(us, mp, 1))
- break;
-#endif
- if (!send_data(mp, us))
- putq(q, mp);
- break;
-
- case M_IOCTL:
- iop = (struct iocblk *) mp->b_rptr;
- error = EINVAL;
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: ioctl %x count=%d\n",
- us->mn, iop->ioc_cmd, iop->ioc_count);
- switch (iop->ioc_cmd) {
-#if defined(SOL2)
- case DLIOCRAW: /* raw M_DATA mode */
- us->flags |= US_RAWDATA;
- error = 0;
- break;
-#endif /* defined(SOL2) */
- case I_LINK:
- if ((us->flags & US_CONTROL) == 0 || us->lowerq != 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl I_LINK b_cont = 0!\n", us->mn);
- break;
- }
- lb = (struct linkblk *) mp->b_cont->b_rptr;
- lq = lb->l_qbot;
- if (lq == 0) {
- DPRINT1("pppuwput/%d: ioctl I_LINK l_qbot = 0!\n", us->mn);
- break;
- }
- LOCK_LOWER_W;
- us->lowerq = lq;
- lq->q_ptr = (caddr_t) q;
- RD(lq)->q_ptr = (caddr_t) us->q;
- UNLOCK_LOWER;
- iop->ioc_count = 0;
- error = 0;
- us->flags &= ~US_LASTMOD;
- /* Unblock upper streams which now feed this lower stream. */
- qenable(q);
- /* Send useful information down to the modules which
- are now linked below us. */
- putctl2(lq, M_CTL, PPPCTL_UNIT, us->ppa_id);
- putctl4(lq, M_CTL, PPPCTL_MRU, us->mru);
- putctl4(lq, M_CTL, PPPCTL_MTU, us->mtu);
-#ifdef PRIOQ
- /* Lower tty driver's queue hiwat/lowat from default 4096/128
- to 256/128 since we don't want queueing of data on
- output to physical device */
-
- freezestr(lq);
- for (tlq = lq; tlq->q_next != NULL; tlq = tlq->q_next)
- ;
- strqset(tlq, QHIWAT, 0, 256);
- strqset(tlq, QLOWAT, 0, 128);
- unfreezestr(lq);
-#endif /* PRIOQ */
- break;
-
- case I_UNLINK:
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl I_UNLINK b_cont = 0!\n", us->mn);
- break;
- }
- lb = (struct linkblk *) mp->b_cont->b_rptr;
-#if DEBUG
- if (us->lowerq != lb->l_qbot) {
- DPRINT2("ppp unlink: lowerq=%x qbot=%x\n",
- us->lowerq, lb->l_qbot);
- break;
- }
-#endif
- iop->ioc_count = 0;
- qwriter(q, mp, detach_lower, PERIM_OUTER);
- error = -1;
- break;
-
- case PPPIO_NEWPPA:
- if (us->flags & US_CONTROL)
- break;
- if ((us->flags & US_PRIV) == 0) {
- error = EPERM;
- break;
- }
- /* Arrange to return an int */
- if ((mq = mp->b_cont) == 0
- || mq->b_datap->db_lim - mq->b_rptr < sizeof(int)) {
- mq = allocb(sizeof(int), BPRI_HI);
- if (mq == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = mq;
- mq->b_cont = 0;
- }
- iop->ioc_count = sizeof(int);
- mq->b_wptr = mq->b_rptr + sizeof(int);
- qwriter(q, mp, new_ppa, PERIM_OUTER);
- error = -1;
- break;
-
- case PPPIO_ATTACH:
- /* like dlpi_attach, for programs which can't write to
- the stream (like pppstats) */
- if (iop->ioc_count != sizeof(int) || us->ppa != 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_ATTACH b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
- if (ppa->ppa_id == n)
- break;
- if (ppa == 0)
- break;
- us->ppa = ppa;
- iop->ioc_count = 0;
- qwriter(q, mp, attach_ppa, PERIM_OUTER);
- error = -1;
- break;
-
-#ifdef NO_DLPI
- case PPPIO_BIND:
- /* Attach to a given SAP. */
- if (iop->ioc_count != sizeof(int) || us->ppa == 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_BIND b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- /* n must be a valid PPP network protocol number. */
- if (n < 0x21 || n > 0x3fff || (n & 0x101) != 1)
- break;
- /* check that no other stream is bound to this sap already. */
- for (os = us->ppa; os != 0; os = os->next)
- if (os->sap == n)
- break;
- if (os != 0)
- break;
- us->sap = n;
- iop->ioc_count = 0;
- error = 0;
- break;
-#endif /* NO_DLPI */
-
- case PPPIO_MRU:
- if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_MRU b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- if (n <= 0 || n > PPP_MAXMRU)
- break;
- if (n < PPP_MRU)
- n = PPP_MRU;
- us->mru = n;
- if (us->lowerq)
- putctl4(us->lowerq, M_CTL, PPPCTL_MRU, n);
- error = 0;
- iop->ioc_count = 0;
- break;
-
- case PPPIO_MTU:
- if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_MTU b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- if (n <= 0 || n > PPP_MAXMTU)
- break;
- us->mtu = n;
-#ifdef LACHTCP
- /* The MTU reported in netstat, not used as IP max packet size! */
- us->ifstats.ifs_mtu = n;
-#endif
- if (us->lowerq)
- putctl4(us->lowerq, M_CTL, PPPCTL_MTU, n);
- error = 0;
- iop->ioc_count = 0;
- break;
-
- case PPPIO_LASTMOD:
- us->flags |= US_LASTMOD;
- error = 0;
- break;
-
- case PPPIO_DEBUG:
- if (iop->ioc_count != sizeof(int))
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_DEBUG b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- if (n == PPPDBG_DUMP + PPPDBG_DRIVER) {
- qwriter(q, NULL, debug_dump, PERIM_OUTER);
- iop->ioc_count = 0;
- error = -1;
- } else if (n == PPPDBG_LOG + PPPDBG_DRIVER) {
- DPRINT1("ppp/%d: debug log enabled\n", us->mn);
- us->flags |= US_DBGLOG;
- iop->ioc_count = 0;
- error = 0;
- } else {
- if (us->ppa == 0 || us->ppa->lowerq == 0)
- break;
- putnext(us->ppa->lowerq, mp);
- error = -1;
- }
- break;
-
- case PPPIO_NPMODE:
- if (iop->ioc_count != 2 * sizeof(int))
- break;
- if ((us->flags & US_CONTROL) == 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_NPMODE b_cont = 0!\n", us->mn);
- break;
- }
- sap = ((int *)mp->b_cont->b_rptr)[0];
- for (nps = us->next; nps != 0; nps = nps->next) {
- if (us->flags & US_DBGLOG)
- DPRINT2("us = 0x%x, us->next->sap = 0x%x\n", nps, nps->sap);
- if (nps->sap == sap)
- break;
- }
- if (nps == 0) {
- if (us->flags & US_DBGLOG)
- DPRINT2("ppp/%d: no stream for sap %x\n", us->mn, sap);
- break;
- }
- /* XXX possibly should use qwriter here */
- nps->npmode = (enum NPmode) ((int *)mp->b_cont->b_rptr)[1];
- if (nps->npmode != NPMODE_QUEUE && (nps->flags & US_BLOCKED) != 0)
- qenable(WR(nps->q));
- iop->ioc_count = 0;
- error = 0;
- break;
-
- case PPPIO_GIDLE:
- if ((ppa = us->ppa) == 0)
- break;
- mq = allocb(sizeof(struct ppp_idle), BPRI_HI);
- if (mq == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = mq;
- mq->b_cont = 0;
- pip = (struct ppp_idle *) mq->b_wptr;
- pip->xmit_idle = time - ppa->last_sent;
- pip->recv_idle = time - ppa->last_recv;
- mq->b_wptr += sizeof(struct ppp_idle);
- iop->ioc_count = sizeof(struct ppp_idle);
- error = 0;
- break;
-
-#ifdef LACHTCP
- case SIOCSIFNAME:
- /* Sent from IP down to us. Attach the ifstats structure. */
- if (iop->ioc_count != sizeof(struct ifreq) || us->ppa == 0)
- break;
- ifr = (struct ifreq *)mp->b_cont->b_rptr;
- /* Find the unit number in the interface name. */
- for (i = 0; i < IFNAMSIZ; i++) {
- if (ifr->ifr_name[i] == 0 ||
- (ifr->ifr_name[i] >= '0' &&
- ifr->ifr_name[i] <= '9'))
- break;
- else
- us->ifname[i] = ifr->ifr_name[i];
- }
- us->ifname[i] = 0;
-
- /* Convert the unit number to binary. */
- for (n = 0; i < IFNAMSIZ; i++) {
- if (ifr->ifr_name[i] == 0) {
- break;
- }
- else {
- n = n * 10 + ifr->ifr_name[i] - '0';
- }
- }
-
- /* Verify the ppa. */
- if (us->ppa->ppa_id != n)
- break;
- ppa = us->ppa;
-
- /* Set up the netstat block. */
- strncpy (ppa->ifname, us->ifname, IFNAMSIZ);
-
- ppa->ifstats.ifs_name = ppa->ifname;
- ppa->ifstats.ifs_unit = n;
- ppa->ifstats.ifs_active = us->state != DL_UNBOUND;
- ppa->ifstats.ifs_mtu = ppa->mtu;
-
- /* Link in statistics used by netstat. */
- ppa->ifstats.ifs_next = ifstats;
- ifstats = &ppa->ifstats;
-
- iop->ioc_count = 0;
- error = 0;
- break;
-
- case SIOCGIFFLAGS:
- if (!(us->flags & US_CONTROL)) {
- if (us->ppa)
- us = us->ppa;
- else
- break;
- }
- ((struct iocblk_in *)iop)->ioc_ifflags = us->ifflags;
- error = 0;
- break;
-
- case SIOCSIFFLAGS:
- if (!(us->flags & US_CONTROL)) {
- if (us->ppa)
- us = us->ppa;
- else
- break;
- }
- us->ifflags = ((struct iocblk_in *)iop)->ioc_ifflags;
- error = 0;
- break;
-
- case SIOCSIFADDR:
- if (!(us->flags & US_CONTROL)) {
- if (us->ppa)
- us = us->ppa;
- else
- break;
- }
- us->ifflags |= IFF_RUNNING;
- ((struct iocblk_in *)iop)->ioc_ifflags |= IFF_RUNNING;
- error = 0;
- break;
-
- case SIOCSIFMTU:
- /*
- * Vanilla SVR4 systems don't handle SIOCSIFMTU, rather
- * they take the MTU from the DL_INFO_ACK we sent in response
- * to their DL_INFO_REQ. Fortunately, they will update the
- * MTU if we send an unsolicited DL_INFO_ACK up.
- */
- if ((mq = allocb(sizeof(dl_info_req_t), BPRI_HI)) == 0)
- break; /* should do bufcall */
- ((union DL_primitives *)mq->b_rptr)->dl_primitive = DL_INFO_REQ;
- mq->b_wptr = mq->b_rptr + sizeof(dl_info_req_t);
- dlpi_request(q, mq, us);
- error = 0;
- break;
-
- case SIOCGIFNETMASK:
- case SIOCSIFNETMASK:
- case SIOCGIFADDR:
- case SIOCGIFDSTADDR:
- case SIOCSIFDSTADDR:
- case SIOCGIFMETRIC:
- error = 0;
- break;
-#endif /* LACHTCP */
-
- default:
- if (us->ppa == 0 || us->ppa->lowerq == 0)
- break;
- us->ioc_id = iop->ioc_id;
- error = -1;
- switch (iop->ioc_cmd) {
- case PPPIO_GETSTAT:
- case PPPIO_GETCSTAT:
- if (us->flags & US_LASTMOD) {
- error = EINVAL;
- break;
- }
- putnext(us->ppa->lowerq, mp);
- break;
- default:
- if (us->flags & US_PRIV)
- putnext(us->ppa->lowerq, mp);
- else {
- DPRINT1("ppp ioctl %x rejected\n", iop->ioc_cmd);
- error = EPERM;
- }
- break;
- }
- break;
- }
-
- if (error > 0) {
- iop->ioc_error = error;
- mp->b_datap->db_type = M_IOCNAK;
- qreply(q, mp);
- } else if (error == 0) {
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
- }
- break;
-
- case M_FLUSH:
- if (us->flags & US_DBGLOG)
- DPRINT2("ppp/%d: flush %x\n", us->mn, *mp->b_rptr);
- if (*mp->b_rptr & FLUSHW)
- flushq(q, FLUSHDATA);
- if (*mp->b_rptr & FLUSHR) {
- *mp->b_rptr &= ~FLUSHW;
- qreply(q, mp);
- } else
- freemsg(mp);
- break;
-
- default:
- freemsg(mp);
- break;
- }
- return 0;
-}
-
-#ifndef NO_DLPI
-static void
-dlpi_request(q, mp, us)
- queue_t *q;
- mblk_t *mp;
- upperstr_t *us;
-{
- union DL_primitives *d = (union DL_primitives *) mp->b_rptr;
- int size = mp->b_wptr - mp->b_rptr;
- mblk_t *reply, *np;
- upperstr_t *ppa, *os;
- int sap, len;
- dl_info_ack_t *info;
- dl_bind_ack_t *ackp;
-#if DL_CURRENT_VERSION >= 2
- dl_phys_addr_ack_t *paddrack;
- static struct ether_addr eaddr = {0};
-#endif
-
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: dlpi prim %x len=%d\n", us->mn,
- d->dl_primitive, size);
- switch (d->dl_primitive) {
- case DL_INFO_REQ:
- if (size < sizeof(dl_info_req_t))
- goto badprim;
- if ((reply = allocb(sizeof(dl_info_ack_t), BPRI_HI)) == 0)
- break; /* should do bufcall */
- reply->b_datap->db_type = M_PCPROTO;
- info = (dl_info_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_info_ack_t);
- bzero((caddr_t) info, sizeof(dl_info_ack_t));
- info->dl_primitive = DL_INFO_ACK;
- info->dl_max_sdu = us->ppa? us->ppa->mtu: PPP_MAXMTU;
- info->dl_min_sdu = 1;
- info->dl_addr_length = sizeof(uint);
- info->dl_mac_type = DL_ETHER; /* a bigger lie */
- info->dl_current_state = us->state;
- info->dl_service_mode = DL_CLDLS;
- info->dl_provider_style = DL_STYLE2;
-#if DL_CURRENT_VERSION >= 2
- info->dl_sap_length = sizeof(uint);
- info->dl_version = DL_CURRENT_VERSION;
-#endif
- qreply(q, reply);
- break;
-
- case DL_ATTACH_REQ:
- if (size < sizeof(dl_attach_req_t))
- goto badprim;
- if (us->state != DL_UNATTACHED || us->ppa != 0) {
- dlpi_error(q, us, DL_ATTACH_REQ, DL_OUTSTATE, 0);
- break;
- }
- for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
- if (ppa->ppa_id == d->attach_req.dl_ppa)
- break;
- if (ppa == 0) {
- dlpi_error(q, us, DL_ATTACH_REQ, DL_BADPPA, 0);
- break;
- }
- us->ppa = ppa;
- qwriter(q, mp, attach_ppa, PERIM_OUTER);
- return;
-
- case DL_DETACH_REQ:
- if (size < sizeof(dl_detach_req_t))
- goto badprim;
- if (us->state != DL_UNBOUND || us->ppa == 0) {
- dlpi_error(q, us, DL_DETACH_REQ, DL_OUTSTATE, 0);
- break;
- }
- qwriter(q, mp, detach_ppa, PERIM_OUTER);
- return;
-
- case DL_BIND_REQ:
- if (size < sizeof(dl_bind_req_t))
- goto badprim;
- if (us->state != DL_UNBOUND || us->ppa == 0) {
- dlpi_error(q, us, DL_BIND_REQ, DL_OUTSTATE, 0);
- break;
- }
-#if 0
- /* apparently this test fails (unnecessarily?) on some systems */
- if (d->bind_req.dl_service_mode != DL_CLDLS) {
- dlpi_error(q, us, DL_BIND_REQ, DL_UNSUPPORTED, 0);
- break;
- }
-#endif
-
- /* saps must be valid PPP network protocol numbers,
- except that we accept ETHERTYPE_IP in place of PPP_IP. */
- sap = d->bind_req.dl_sap;
- us->req_sap = sap;
-
-#if defined(SOL2)
- if (us->flags & US_DBGLOG)
- DPRINT2("DL_BIND_REQ: ip gives sap = 0x%x, us = 0x%x", sap, us);
-
- if (sap == ETHERTYPE_IP) /* normal IFF_IPV4 */
- sap = PPP_IP;
- else if (sap == ETHERTYPE_IPV6) /* when IFF_IPV6 is set */
- sap = PPP_IPV6;
- else if (sap == ETHERTYPE_ALLSAP) /* snoop gives sap of 0 */
- sap = PPP_ALLSAP;
- else {
- DPRINT2("DL_BIND_REQ: unrecognized sap = 0x%x, us = 0x%x", sap, us);
- dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
- break;
- }
-#else
- if (sap == ETHERTYPE_IP)
- sap = PPP_IP;
- if (sap < 0x21 || sap > 0x3fff || (sap & 0x101) != 1) {
- dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
- break;
- }
-#endif /* defined(SOL2) */
-
- /* check that no other stream is bound to this sap already. */
- for (os = us->ppa; os != 0; os = os->next)
- if (os->sap == sap)
- break;
- if (os != 0) {
- dlpi_error(q, us, DL_BIND_REQ, DL_NOADDR, 0);
- break;
- }
-
- us->sap = sap;
- us->state = DL_IDLE;
-
- if ((reply = allocb(sizeof(dl_bind_ack_t) + sizeof(uint),
- BPRI_HI)) == 0)
- break; /* should do bufcall */
- ackp = (dl_bind_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_bind_ack_t) + sizeof(uint);
- reply->b_datap->db_type = M_PCPROTO;
- bzero((caddr_t) ackp, sizeof(dl_bind_ack_t));
- ackp->dl_primitive = DL_BIND_ACK;
- ackp->dl_sap = sap;
- ackp->dl_addr_length = sizeof(uint);
- ackp->dl_addr_offset = sizeof(dl_bind_ack_t);
- *(uint *)(ackp+1) = sap;
- qreply(q, reply);
- break;
-
- case DL_UNBIND_REQ:
- if (size < sizeof(dl_unbind_req_t))
- goto badprim;
- if (us->state != DL_IDLE) {
- dlpi_error(q, us, DL_UNBIND_REQ, DL_OUTSTATE, 0);
- break;
- }
- us->sap = -1;
- us->state = DL_UNBOUND;
-#ifdef LACHTCP
- us->ppa->ifstats.ifs_active = 0;
-#endif
- dlpi_ok(q, DL_UNBIND_REQ);
- break;
-
- case DL_UNITDATA_REQ:
- if (size < sizeof(dl_unitdata_req_t))
- goto badprim;
- if (us->state != DL_IDLE) {
- dlpi_error(q, us, DL_UNITDATA_REQ, DL_OUTSTATE, 0);
- break;
- }
- if ((ppa = us->ppa) == 0) {
- cmn_err(CE_CONT, "ppp: in state dl_idle but ppa == 0?\n");
- break;
- }
- len = mp->b_cont == 0? 0: msgdsize(mp->b_cont);
- if (len > ppa->mtu) {
- DPRINT2("dlpi data too large (%d > %d)\n", len, ppa->mtu);
- break;
- }
-
-#if defined(SOL2)
- /*
- * Should there be any promiscuous stream(s), send the data
- * up for each promiscuous stream that we recognize.
- */
- if (mp->b_cont)
- promisc_sendup(ppa, mp->b_cont, us->sap, 0);
-#endif /* defined(SOL2) */
-
- mp->b_band = 0;
-#ifdef PRIOQ
- /* Extract s_port & d_port from IP-packet, the code is a bit
- dirty here, but so am I, too... */
- if (mp->b_datap->db_type == M_PROTO && us->sap == PPP_IP
- && mp->b_cont != 0) {
- u_char *bb, *tlh;
- int iphlen, len;
- u_short *ptr;
- u_char band_unset, cur_band, syn;
- u_short s_port, d_port;
-
- bb = mp->b_cont->b_rptr; /* bb points to IP-header*/
- len = mp->b_cont->b_wptr - mp->b_cont->b_rptr;
- syn = 0;
- s_port = IPPORT_DEFAULT;
- d_port = IPPORT_DEFAULT;
- if (len >= 20) { /* 20 = minimum length of IP header */
- iphlen = (bb[0] & 0x0f) * 4;
- tlh = bb + iphlen;
- len -= iphlen;
- switch (bb[9]) {
- case IPPROTO_TCP:
- if (len >= 20) { /* min length of TCP header */
- s_port = (tlh[0] << 8) + tlh[1];
- d_port = (tlh[2] << 8) + tlh[3];
- syn = tlh[13] & 0x02;
- }
- break;
- case IPPROTO_UDP:
- if (len >= 8) { /* min length of UDP header */
- s_port = (tlh[0] << 8) + tlh[1];
- d_port = (tlh[2] << 8) + tlh[3];
- }
- break;
- }
- }
-
- /*
- * Now calculate b_band for this packet from the
- * port-priority table.
- */
- ptr = prioq_table;
- cur_band = max_band;
- band_unset = 1;
- while (*ptr) {
- while (*ptr && band_unset)
- if (s_port == *ptr || d_port == *ptr++) {
- mp->b_band = cur_band;
- band_unset = 0;
- break;
- }
- ptr++;
- cur_band--;
- }
- if (band_unset)
- mp->b_band = def_band;
- /* It may be usable to urge SYN packets a bit */
- if (syn)
- mp->b_band++;
- }
-#endif /* PRIOQ */
- /* this assumes PPP_HDRLEN <= sizeof(dl_unitdata_req_t) */
- if (mp->b_datap->db_ref > 1) {
- np = allocb(PPP_HDRLEN, BPRI_HI);
- if (np == 0)
- break; /* gak! */
- np->b_cont = mp->b_cont;
- mp->b_cont = 0;
- freeb(mp);
- mp = np;
- } else
- mp->b_datap->db_type = M_DATA;
- /* XXX should use dl_dest_addr_offset/length here,
- but we would have to translate ETHERTYPE_IP -> PPP_IP */
- mp->b_wptr = mp->b_rptr + PPP_HDRLEN;
- mp->b_rptr[0] = PPP_ALLSTATIONS;
- mp->b_rptr[1] = PPP_UI;
- mp->b_rptr[2] = us->sap >> 8;
- mp->b_rptr[3] = us->sap;
- if (pass_packet(us, mp, 1)) {
- if (!send_data(mp, us))
- putq(q, mp);
- }
- return;
-
-#if DL_CURRENT_VERSION >= 2
- case DL_PHYS_ADDR_REQ:
- if (size < sizeof(dl_phys_addr_req_t))
- goto badprim;
-
- /*
- * Don't check state because ifconfig sends this one down too
- */
-
- if ((reply = allocb(sizeof(dl_phys_addr_ack_t)+ETHERADDRL,
- BPRI_HI)) == 0)
- break; /* should do bufcall */
- reply->b_datap->db_type = M_PCPROTO;
- paddrack = (dl_phys_addr_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_phys_addr_ack_t);
- bzero((caddr_t) paddrack, sizeof(dl_phys_addr_ack_t)+ETHERADDRL);
- paddrack->dl_primitive = DL_PHYS_ADDR_ACK;
- paddrack->dl_addr_length = ETHERADDRL;
- paddrack->dl_addr_offset = sizeof(dl_phys_addr_ack_t);
- bcopy(&eaddr, reply->b_wptr, ETHERADDRL);
- reply->b_wptr += ETHERADDRL;
- qreply(q, reply);
- break;
-
-#if defined(SOL2)
- case DL_PROMISCON_REQ:
- if (size < sizeof(dl_promiscon_req_t))
- goto badprim;
- us->flags |= US_PROMISC;
- dlpi_ok(q, DL_PROMISCON_REQ);
- break;
-
- case DL_PROMISCOFF_REQ:
- if (size < sizeof(dl_promiscoff_req_t))
- goto badprim;
- us->flags &= ~US_PROMISC;
- dlpi_ok(q, DL_PROMISCOFF_REQ);
- break;
-#else
- case DL_PROMISCON_REQ: /* fall thru */
- case DL_PROMISCOFF_REQ: /* fall thru */
-#endif /* defined(SOL2) */
-#endif /* DL_CURRENT_VERSION >= 2 */
-
-#if DL_CURRENT_VERSION >= 2
- case DL_SET_PHYS_ADDR_REQ:
- case DL_SUBS_BIND_REQ:
- case DL_SUBS_UNBIND_REQ:
- case DL_ENABMULTI_REQ:
- case DL_DISABMULTI_REQ:
- case DL_XID_REQ:
- case DL_TEST_REQ:
- case DL_REPLY_UPDATE_REQ:
- case DL_REPLY_REQ:
- case DL_DATA_ACK_REQ:
-#endif
- case DL_CONNECT_REQ:
- case DL_TOKEN_REQ:
- dlpi_error(q, us, d->dl_primitive, DL_NOTSUPPORTED, 0);
- break;
-
- case DL_CONNECT_RES:
- case DL_DISCONNECT_REQ:
- case DL_RESET_REQ:
- case DL_RESET_RES:
- dlpi_error(q, us, d->dl_primitive, DL_OUTSTATE, 0);
- break;
-
- case DL_UDQOS_REQ:
- dlpi_error(q, us, d->dl_primitive, DL_BADQOSTYPE, 0);
- break;
-
-#if DL_CURRENT_VERSION >= 2
- case DL_TEST_RES:
- case DL_XID_RES:
- break;
-#endif
-
- default:
- cmn_err(CE_CONT, "ppp: unknown dlpi prim 0x%x\n", d->dl_primitive);
- /* fall through */
- badprim:
- dlpi_error(q, us, d->dl_primitive, DL_BADPRIM, 0);
- break;
- }
- freemsg(mp);
-}
-
-static void
-dlpi_error(q, us, prim, err, uerr)
- queue_t *q;
- upperstr_t *us;
- int prim, err, uerr;
-{
- mblk_t *reply;
- dl_error_ack_t *errp;
-
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: dlpi error, prim=%x, err=%x\n", us->mn, prim, err);
- reply = allocb(sizeof(dl_error_ack_t), BPRI_HI);
- if (reply == 0)
- return; /* XXX should do bufcall */
- reply->b_datap->db_type = M_PCPROTO;
- errp = (dl_error_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_error_ack_t);
- errp->dl_primitive = DL_ERROR_ACK;
- errp->dl_error_primitive = prim;
- errp->dl_errno = err;
- errp->dl_unix_errno = uerr;
- qreply(q, reply);
-}
-
-static void
-dlpi_ok(q, prim)
- queue_t *q;
- int prim;
-{
- mblk_t *reply;
- dl_ok_ack_t *okp;
-
- reply = allocb(sizeof(dl_ok_ack_t), BPRI_HI);
- if (reply == 0)
- return; /* XXX should do bufcall */
- reply->b_datap->db_type = M_PCPROTO;
- okp = (dl_ok_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_ok_ack_t);
- okp->dl_primitive = DL_OK_ACK;
- okp->dl_correct_primitive = prim;
- qreply(q, reply);
-}
-#endif /* NO_DLPI */
-
-static int
-pass_packet(us, mp, outbound)
- upperstr_t *us;
- mblk_t *mp;
- int outbound;
-{
- int pass;
- upperstr_t *ppa;
-
- if ((ppa = us->ppa) == 0) {
- freemsg(mp);
- return 0;
- }
-
-#ifdef FILTER_PACKETS
- pass = ip_hard_filter(us, mp, outbound);
-#else
- /*
- * Here is where we might, in future, decide whether to pass
- * or drop the packet, and whether it counts as link activity.
- */
- pass = 1;
-#endif /* FILTER_PACKETS */
-
- if (pass < 0) {
- /* pass only if link already up, and don't update time */
- if (ppa->lowerq == 0) {
- freemsg(mp);
- return 0;
- }
- pass = 1;
- } else if (pass) {
- if (outbound)
- ppa->last_sent = time;
- else
- ppa->last_recv = time;
- }
-
- return pass;
-}
-
-/*
- * We have some data to send down to the lower stream (or up the
- * control stream, if we don't have a lower stream attached).
- * Returns 1 if the message was dealt with, 0 if it wasn't able
- * to be sent on and should therefore be queued up.
- */
-static int
-send_data(mp, us)
- mblk_t *mp;
- upperstr_t *us;
-{
- upperstr_t *ppa;
-
- if ((us->flags & US_BLOCKED) || us->npmode == NPMODE_QUEUE)
- return 0;
- ppa = us->ppa;
- if (ppa == 0 || us->npmode == NPMODE_DROP || us->npmode == NPMODE_ERROR) {
- if (us->flags & US_DBGLOG)
- DPRINT2("ppp/%d: dropping pkt (npmode=%d)\n", us->mn, us->npmode);
- freemsg(mp);
- return 1;
- }
- if (ppa->lowerq == 0) {
- /* try to send it up the control stream */
- if (bcanputnext(ppa->q, mp->b_band)) {
- /*
- * The message seems to get corrupted for some reason if
- * we just send the message up as it is, so we send a copy.
- */
- mblk_t *np = copymsg(mp);
- freemsg(mp);
- if (np != 0)
- putnext(ppa->q, np);
- return 1;
- }
- } else {
- if (bcanputnext(ppa->lowerq, mp->b_band)) {
- MT_ENTER(&ppa->stats_lock);
- ppa->stats.ppp_opackets++;
- ppa->stats.ppp_obytes += msgdsize(mp);
-#ifdef INCR_OPACKETS
- INCR_OPACKETS(ppa);
-#endif
- MT_EXIT(&ppa->stats_lock);
- /*
- * The lower queue is only ever detached while holding an
- * exclusive lock on the whole driver. So we can be confident
- * that the lower queue is still there.
- */
- putnext(ppa->lowerq, mp);
- return 1;
- }
- }
- us->flags |= US_BLOCKED;
- return 0;
-}
-
-/*
- * Allocate a new PPA id and link this stream into the list of PPAs.
- * This procedure is called with an exclusive lock on all queues in
- * this driver.
- */
-static void
-new_ppa(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us, *up, **usp;
- int ppa_id;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("new_ppa: q_ptr = 0!\n");
- return;
- }
-
- usp = &ppas;
- ppa_id = 0;
- while ((up = *usp) != 0 && ppa_id == up->ppa_id) {
- ++ppa_id;
- usp = &up->nextppa;
- }
- us->ppa_id = ppa_id;
- us->ppa = us;
- us->next = 0;
- us->nextppa = *usp;
- *usp = us;
- us->flags |= US_CONTROL;
- us->npmode = NPMODE_PASS;
-
- us->mtu = PPP_MTU;
- us->mru = PPP_MRU;
-
-#ifdef SOL2
- /*
- * Create a kstats record for our statistics, so netstat -i works.
- */
- if (us->kstats == 0) {
- char unit[32];
-
- sprintf(unit, "ppp%d", us->ppa->ppa_id);
- us->kstats = kstat_create("ppp", us->ppa->ppa_id, unit,
- "net", KSTAT_TYPE_NAMED, 4, 0);
- if (us->kstats != 0) {
- kstat_named_t *kn = KSTAT_NAMED_PTR(us->kstats);
-
- strcpy(kn[0].name, "ipackets");
- kn[0].data_type = KSTAT_DATA_ULONG;
- strcpy(kn[1].name, "ierrors");
- kn[1].data_type = KSTAT_DATA_ULONG;
- strcpy(kn[2].name, "opackets");
- kn[2].data_type = KSTAT_DATA_ULONG;
- strcpy(kn[3].name, "oerrors");
- kn[3].data_type = KSTAT_DATA_ULONG;
- kstat_install(us->kstats);
- }
- }
-#endif /* SOL2 */
-
- *(int *)mp->b_cont->b_rptr = ppa_id;
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
-}
-
-static void
-attach_ppa(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us, *t;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("attach_ppa: q_ptr = 0!\n");
- return;
- }
-
-#ifndef NO_DLPI
- us->state = DL_UNBOUND;
-#endif
- for (t = us->ppa; t->next != 0; t = t->next)
- ;
- t->next = us;
- us->next = 0;
- if (mp->b_datap->db_type == M_IOCTL) {
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
- } else {
-#ifndef NO_DLPI
- dlpi_ok(q, DL_ATTACH_REQ);
-#endif
- }
-}
-
-static void
-detach_ppa(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us, *t;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("detach_ppa: q_ptr = 0!\n");
- return;
- }
-
- for (t = us->ppa; t->next != 0; t = t->next)
- if (t->next == us) {
- t->next = us->next;
- break;
- }
- us->next = 0;
- us->ppa = 0;
-#ifndef NO_DLPI
- us->state = DL_UNATTACHED;
- dlpi_ok(q, DL_DETACH_REQ);
-#endif
-}
-
-/*
- * We call this with qwriter in order to give the upper queue procedures
- * the guarantee that the lower queue is not going to go away while
- * they are executing.
- */
-static void
-detach_lower(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("detach_lower: q_ptr = 0!\n");
- return;
- }
-
- LOCK_LOWER_W;
- us->lowerq->q_ptr = 0;
- RD(us->lowerq)->q_ptr = 0;
- us->lowerq = 0;
- UNLOCK_LOWER;
-
- /* Unblock streams which now feed back up the control stream. */
- qenable(us->q);
-
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
-}
-
-static int
-pppuwsrv(q)
- queue_t *q;
-{
- upperstr_t *us, *as;
- mblk_t *mp;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("pppuwsrv: q_ptr = 0!\n");
- return 0;
- }
-
- /*
- * If this is a control stream, then this service procedure
- * probably got enabled because of flow control in the lower
- * stream being enabled (or because of the lower stream going
- * away). Therefore we enable the service procedure of all
- * attached upper streams.
- */
- if (us->flags & US_CONTROL) {
- for (as = us->next; as != 0; as = as->next)
- qenable(WR(as->q));
- }
-
- /* Try to send on any data queued here. */
- us->flags &= ~US_BLOCKED;
- while ((mp = getq(q)) != 0) {
- if (!send_data(mp, us)) {
- putbq(q, mp);
- break;
- }
- }
-
- return 0;
-}
-
-/* should never get called... */
-static int
-ppplwput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- putnext(q, mp);
- return 0;
-}
-
-static int
-ppplwsrv(q)
- queue_t *q;
-{
- queue_t *uq;
-
- /*
- * Flow control has back-enabled this stream:
- * enable the upper write service procedure for
- * the upper control stream for this lower stream.
- */
- LOCK_LOWER_R;
- uq = (queue_t *) q->q_ptr;
- if (uq != 0)
- qenable(uq);
- UNLOCK_LOWER;
- return 0;
-}
-
-/*
- * This should only get called for control streams.
- */
-static int
-pppurput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *ppa, *us;
- int proto, len;
- struct iocblk *iop;
-
- ppa = (upperstr_t *) q->q_ptr;
- if (ppa == 0) {
- DPRINT("pppurput: q_ptr = 0!\n");
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
- case M_CTL:
- MT_ENTER(&ppa->stats_lock);
- switch (*mp->b_rptr) {
- case PPPCTL_IERROR:
-#ifdef INCR_IERRORS
- INCR_IERRORS(ppa);
-#endif
- ppa->stats.ppp_ierrors++;
- break;
- case PPPCTL_OERROR:
-#ifdef INCR_OERRORS
- INCR_OERRORS(ppa);
-#endif
- ppa->stats.ppp_oerrors++;
- break;
- }
- MT_EXIT(&ppa->stats_lock);
- freemsg(mp);
- break;
-
- case M_IOCACK:
- case M_IOCNAK:
- /*
- * Attempt to match up the response with the stream
- * that the request came from.
- */
- iop = (struct iocblk *) mp->b_rptr;
- for (us = ppa; us != 0; us = us->next)
- if (us->ioc_id == iop->ioc_id)
- break;
- if (us == 0)
- freemsg(mp);
- else
- putnext(us->q, mp);
- break;
-
- case M_HANGUP:
- /*
- * The serial device has hung up. We don't want to send
- * the M_HANGUP message up to pppd because that will stop
- * us from using the control stream any more. Instead we
- * send a zero-length message as an end-of-file indication.
- */
- freemsg(mp);
- mp = allocb(1, BPRI_HI);
- if (mp == 0) {
- DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn);
- break;
- }
- putnext(ppa->q, mp);
- break;
-
- default:
- if (mp->b_datap->db_type == M_DATA) {
- len = msgdsize(mp);
- if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) {
- PULLUP(mp, PPP_HDRLEN);
- if (mp == 0) {
- DPRINT1("ppp_urput: msgpullup failed (len=%d)\n", len);
- break;
- }
- }
- MT_ENTER(&ppa->stats_lock);
- ppa->stats.ppp_ipackets++;
- ppa->stats.ppp_ibytes += len;
-#ifdef INCR_IPACKETS
- INCR_IPACKETS(ppa);
-#endif
- MT_EXIT(&ppa->stats_lock);
-
- proto = PPP_PROTOCOL(mp->b_rptr);
-
-#if defined(SOL2)
- /*
- * Should there be any promiscuous stream(s), send the data
- * up for each promiscuous stream that we recognize.
- */
- promisc_sendup(ppa, mp, proto, 1);
-#endif /* defined(SOL2) */
-
- if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) {
- /*
- * A data packet for some network protocol.
- * Queue it on the upper stream for that protocol.
- * XXX could we just putnext it? (would require thought)
- * The rblocked flag is there to ensure that we keep
- * messages in order for each network protocol.
- */
- if (!pass_packet(us, mp, 0))
- break;
- if (!us->rblocked && !canput(us->q))
- us->rblocked = 1;
- if (!us->rblocked)
- putq(us->q, mp);
- else
- putq(q, mp);
- break;
- }
- }
- /*
- * A control frame, a frame for an unknown protocol,
- * or some other message type.
- * Send it up to pppd via the control stream.
- */
- if (queclass(mp) == QPCTL || canputnext(ppa->q))
- putnext(ppa->q, mp);
- else
- putq(q, mp);
- break;
- }
-
- return 0;
-}
-
-static int
-pppursrv(q)
- queue_t *q;
-{
- upperstr_t *us, *as;
- mblk_t *mp, *hdr;
-#ifndef NO_DLPI
- dl_unitdata_ind_t *ud;
-#endif
- int proto;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("pppursrv: q_ptr = 0!\n");
- return 0;
- }
-
- if (us->flags & US_CONTROL) {
- /*
- * A control stream.
- * If there is no lower queue attached, run the write service
- * routines of other upper streams attached to this PPA.
- */
- if (us->lowerq == 0) {
- as = us;
- do {
- if (as->flags & US_BLOCKED)
- qenable(WR(as->q));
- as = as->next;
- } while (as != 0);
- }
-
- /*
- * Messages get queued on this stream's read queue if they
- * can't be queued on the read queue of the attached stream
- * that they are destined for. This is for flow control -
- * when this queue fills up, the lower read put procedure will
- * queue messages there and the flow control will propagate
- * down from there.
- */
- while ((mp = getq(q)) != 0) {
- proto = PPP_PROTOCOL(mp->b_rptr);
- if (proto < 0x8000 && (as = find_dest(us, proto)) != 0) {
- if (!canput(as->q))
- break;
- putq(as->q, mp);
- } else {
- if (!canputnext(q))
- break;
- putnext(q, mp);
- }
- }
- if (mp) {
- putbq(q, mp);
- } else {
- /* can now put stuff directly on network protocol streams again */
- for (as = us->next; as != 0; as = as->next)
- as->rblocked = 0;
- }
-
- /*
- * If this stream has a lower stream attached,
- * enable the read queue's service routine.
- * XXX we should really only do this if the queue length
- * has dropped below the low-water mark.
- */
- if (us->lowerq != 0)
- qenable(RD(us->lowerq));
-
- } else {
- /*
- * A network protocol stream. Put a DLPI header on each
- * packet and send it on.
- * (Actually, it seems that the IP module will happily
- * accept M_DATA messages without the DL_UNITDATA_IND header.)
- */
- while ((mp = getq(q)) != 0) {
- if (!canputnext(q)) {
- putbq(q, mp);
- break;
- }
-#ifndef NO_DLPI
- proto = PPP_PROTOCOL(mp->b_rptr);
- mp->b_rptr += PPP_HDRLEN;
- hdr = allocb(sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint),
- BPRI_MED);
- if (hdr == 0) {
- /* XXX should put it back and use bufcall */
- freemsg(mp);
- continue;
- }
- hdr->b_datap->db_type = M_PROTO;
- ud = (dl_unitdata_ind_t *) hdr->b_wptr;
- hdr->b_wptr += sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint);
- hdr->b_cont = mp;
- ud->dl_primitive = DL_UNITDATA_IND;
- ud->dl_dest_addr_length = sizeof(uint);
- ud->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
- ud->dl_src_addr_length = sizeof(uint);
- ud->dl_src_addr_offset = ud->dl_dest_addr_offset + sizeof(uint);
-#if DL_CURRENT_VERSION >= 2
- ud->dl_group_address = 0;
-#endif
- /* Send the DLPI client the data with the SAP they requested,
- (e.g. ETHERTYPE_IP) rather than the PPP protocol number
- (e.g. PPP_IP) */
- ((uint *)(ud + 1))[0] = us->req_sap; /* dest SAP */
- ((uint *)(ud + 1))[1] = us->req_sap; /* src SAP */
- putnext(q, hdr);
-#else /* NO_DLPI */
- putnext(q, mp);
-#endif /* NO_DLPI */
- }
- /*
- * Now that we have consumed some packets from this queue,
- * enable the control stream's read service routine so that we
- * can process any packets for us that might have got queued
- * there for flow control reasons.
- */
- if (us->ppa)
- qenable(us->ppa->q);
- }
-
- return 0;
-}
-
-static upperstr_t *
-find_dest(ppa, proto)
- upperstr_t *ppa;
- int proto;
-{
- upperstr_t *us;
-
- for (us = ppa->next; us != 0; us = us->next)
- if (proto == us->sap)
- break;
- return us;
-}
-
-#if defined (SOL2)
-/*
- * Test upstream promiscuous conditions. As of now, only pass IPv4 and
- * Ipv6 packets upstream (let PPP packets be decoded elsewhere).
- */
-static upperstr_t *
-find_promisc(us, proto)
- upperstr_t *us;
- int proto;
-{
-
- if ((proto != PPP_IP) && (proto != PPP_IPV6))
- return (upperstr_t *)0;
-
- for ( ; us; us = us->next) {
- if ((us->flags & US_PROMISC) && (us->state == DL_IDLE))
- return us;
- }
-
- return (upperstr_t *)0;
-}
-
-/*
- * Prepend an empty Ethernet header to msg for snoop, et al.
- */
-static mblk_t *
-prepend_ether(us, mp, proto)
- upperstr_t *us;
- mblk_t *mp;
- int proto;
-{
- mblk_t *eh;
- int type;
-
- if ((eh = allocb(sizeof(struct ether_header), BPRI_HI)) == 0) {
- freemsg(mp);
- return (mblk_t *)0;
- }
-
- if (proto == PPP_IP)
- type = ETHERTYPE_IP;
- else if (proto == PPP_IPV6)
- type = ETHERTYPE_IPV6;
- else
- type = proto; /* What else? Let decoder decide */
-
- eh->b_wptr += sizeof(struct ether_header);
- bzero((caddr_t)eh->b_rptr, sizeof(struct ether_header));
- ((struct ether_header *)eh->b_rptr)->ether_type = htons((short)type);
- eh->b_cont = mp;
- return (eh);
-}
-
-/*
- * Prepend DL_UNITDATA_IND mblk to msg
- */
-static mblk_t *
-prepend_udind(us, mp, proto)
- upperstr_t *us;
- mblk_t *mp;
- int proto;
-{
- dl_unitdata_ind_t *dlu;
- mblk_t *dh;
- size_t size;
-
- size = sizeof(dl_unitdata_ind_t);
- if ((dh = allocb(size, BPRI_MED)) == 0) {
- freemsg(mp);
- return (mblk_t *)0;
- }
-
- dh->b_datap->db_type = M_PROTO;
- dh->b_wptr = dh->b_datap->db_lim;
- dh->b_rptr = dh->b_wptr - size;
-
- dlu = (dl_unitdata_ind_t *)dh->b_rptr;
- dlu->dl_primitive = DL_UNITDATA_IND;
- dlu->dl_dest_addr_length = 0;
- dlu->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
- dlu->dl_src_addr_length = 0;
- dlu->dl_src_addr_offset = sizeof(dl_unitdata_ind_t);
- dlu->dl_group_address = 0;
-
- dh->b_cont = mp;
- return (dh);
-}
-
-/*
- * For any recognized promiscuous streams, send data upstream
- */
-static void
-promisc_sendup(ppa, mp, proto, skip)
- upperstr_t *ppa;
- mblk_t *mp;
- int proto, skip;
-{
- mblk_t *dup_mp, *dup_dup_mp;
- upperstr_t *prus, *nprus;
-
- if ((prus = find_promisc(ppa, proto)) != 0) {
- if (dup_mp = dupmsg(mp)) {
-
- if (skip)
- dup_mp->b_rptr += PPP_HDRLEN;
-
- for ( ; nprus = find_promisc(prus->next, proto);
- prus = nprus) {
-
- if (dup_dup_mp = dupmsg(dup_mp)) {
- if (canputnext(prus->q)) {
- if (prus->flags & US_RAWDATA) {
- dup_dup_mp = prepend_ether(prus, dup_dup_mp, proto);
- putnext(prus->q, dup_dup_mp);
- } else {
- dup_dup_mp = prepend_udind(prus, dup_dup_mp, proto);
- putnext(prus->q, dup_dup_mp);
- }
- } else {
- DPRINT("ppp_urput: data to promisc q dropped\n");
- freemsg(dup_dup_mp);
- }
- }
- }
-
- if (canputnext(prus->q)) {
- if (prus->flags & US_RAWDATA) {
- dup_mp = prepend_ether(prus, dup_mp, proto);
- putnext(prus->q, dup_mp);
- } else {
- dup_mp = prepend_udind(prus, dup_mp, proto);
- putnext(prus->q, dup_mp);
- }
- } else {
- DPRINT("ppp_urput: data to promisc q dropped\n");
- freemsg(dup_mp);
- }
- }
- }
-}
-#endif /* defined(SOL2) */
-
-/*
- * We simply put the message on to the associated upper control stream
- * (either here or in ppplrsrv). That way we enter the perimeters
- * before looking through the list of attached streams to decide which
- * stream it should go up.
- */
-static int
-ppplrput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- queue_t *uq;
- struct iocblk *iop;
-
- switch (mp->b_datap->db_type) {
- case M_IOCTL:
- iop = (struct iocblk *) mp->b_rptr;
- iop->ioc_error = EINVAL;
- mp->b_datap->db_type = M_IOCNAK;
- qreply(q, mp);
- return 0;
- case M_FLUSH:
- if (*mp->b_rptr & FLUSHR)
- flushq(q, FLUSHDATA);
- if (*mp->b_rptr & FLUSHW) {
- *mp->b_rptr &= ~FLUSHR;
- qreply(q, mp);
- } else
- freemsg(mp);
- return 0;
- }
-
- /*
- * If we can't get the lower lock straight away, queue this one
- * rather than blocking, to avoid the possibility of deadlock.
- */
- if (!TRYLOCK_LOWER_R) {
- putq(q, mp);
- return 0;
- }
-
- /*
- * Check that we're still connected to the driver.
- */
- uq = (queue_t *) q->q_ptr;
- if (uq == 0) {
- UNLOCK_LOWER;
- DPRINT1("ppplrput: q = %x, uq = 0??\n", q);
- freemsg(mp);
- return 0;
- }
-
- /*
- * Try to forward the message to the put routine for the upper
- * control stream for this lower stream.
- * If there are already messages queued here, queue this one so
- * they don't get out of order.
- */
- if (queclass(mp) == QPCTL || (qsize(q) == 0 && canput(uq)))
- put(uq, mp);
- else
- putq(q, mp);
-
- UNLOCK_LOWER;
- return 0;
-}
-
-static int
-ppplrsrv(q)
- queue_t *q;
-{
- mblk_t *mp;
- queue_t *uq;
-
- /*
- * Packets get queued here for flow control reasons
- * or if the lrput routine couldn't get the lower lock
- * without blocking.
- */
- LOCK_LOWER_R;
- uq = (queue_t *) q->q_ptr;
- if (uq == 0) {
- UNLOCK_LOWER;
- flushq(q, FLUSHALL);
- DPRINT1("ppplrsrv: q = %x, uq = 0??\n", q);
- return 0;
- }
- while ((mp = getq(q)) != 0) {
- if (queclass(mp) == QPCTL || canput(uq))
- put(uq, mp);
- else {
- putbq(q, mp);
- break;
- }
- }
- UNLOCK_LOWER;
- return 0;
-}
-
-static int
-putctl2(q, type, code, val)
- queue_t *q;
- int type, code, val;
-{
- mblk_t *mp;
-
- mp = allocb(2, BPRI_HI);
- if (mp == 0)
- return 0;
- mp->b_datap->db_type = type;
- mp->b_wptr[0] = code;
- mp->b_wptr[1] = val;
- mp->b_wptr += 2;
- putnext(q, mp);
- return 1;
-}
-
-static int
-putctl4(q, type, code, val)
- queue_t *q;
- int type, code, val;
-{
- mblk_t *mp;
-
- mp = allocb(4, BPRI_HI);
- if (mp == 0)
- return 0;
- mp->b_datap->db_type = type;
- mp->b_wptr[0] = code;
- ((short *)mp->b_wptr)[1] = val;
- mp->b_wptr += 4;
- putnext(q, mp);
- return 1;
-}
-
-static void
-debug_dump(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us;
- queue_t *uq, *lq;
-
- DPRINT("ppp upper streams:\n");
- for (us = minor_devs; us != 0; us = us->nextmn) {
- uq = us->q;
- DPRINT3(" %d: q=%x rlev=%d",
- us->mn, uq, (uq? qsize(uq): 0));
- DPRINT3(" wlev=%d flags=0x%b", (uq? qsize(WR(uq)): 0),
- us->flags, "\020\1priv\2control\3blocked\4last");
- DPRINT3(" state=%x sap=%x req_sap=%x", us->state, us->sap,
- us->req_sap);
- if (us->ppa == 0)
- DPRINT(" ppa=?\n");
- else
- DPRINT1(" ppa=%d\n", us->ppa->ppa_id);
- if (us->flags & US_CONTROL) {
- lq = us->lowerq;
- DPRINT3(" control for %d lq=%x rlev=%d",
- us->ppa_id, lq, (lq? qsize(RD(lq)): 0));
- DPRINT3(" wlev=%d mru=%d mtu=%d\n",
- (lq? qsize(lq): 0), us->mru, us->mtu);
- }
- }
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
-}
-
-#ifdef FILTER_PACKETS
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-#include <netinet/tcp.h>
-
-#define MAX_IPHDR 128 /* max TCP/IP header size */
-
-
-/* The following table contains a hard-coded list of protocol/port pairs.
- * Any matching packets are either discarded unconditionally, or,
- * if ok_if_link_up is non-zero when a connection does not currently exist
- * (i.e., they go through if the connection is present, but never initiate
- * a dial-out).
- * This idea came from a post by dm@garage.uun.org (David Mazieres)
- */
-static struct pktfilt_tab {
- int proto;
- u_short port;
- u_short ok_if_link_up;
-} pktfilt_tab[] = {
- { IPPROTO_UDP, 520, 1 }, /* RIP, ok to pass if link is up */
- { IPPROTO_UDP, 123, 1 }, /* NTP, don't keep up the link for it */
- { -1, 0, 0 } /* terminator entry has port == -1 */
-};
-
-
-static int
-ip_hard_filter(us, mp, outbound)
- upperstr_t *us;
- mblk_t *mp;
- int outbound;
-{
- struct ip *ip;
- struct pktfilt_tab *pft;
- mblk_t *temp_mp;
- int proto;
- int len, hlen;
-
-
- /* Note, the PPP header has already been pulled up in all cases */
- proto = PPP_PROTOCOL(mp->b_rptr);
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: filter, proto=0x%x, out=%d\n", us->mn, proto, outbound);
-
- switch (proto)
- {
- case PPP_IP:
- if ((mp->b_wptr - mp->b_rptr) == PPP_HDRLEN && mp->b_cont != 0) {
- temp_mp = mp->b_cont;
- len = msgdsize(temp_mp);
- hlen = (len < MAX_IPHDR) ? len : MAX_IPHDR;
- PULLUP(temp_mp, hlen);
- if (temp_mp == 0) {
- DPRINT2("ppp/%d: filter, pullup next failed, len=%d\n",
- us->mn, hlen);
- mp->b_cont = 0; /* PULLUP() freed the rest */
- freemsg(mp);
- return 0;
- }
- ip = (struct ip *)mp->b_cont->b_rptr;
- }
- else {
- len = msgdsize(mp);
- hlen = (len < (PPP_HDRLEN+MAX_IPHDR)) ? len : (PPP_HDRLEN+MAX_IPHDR);
- PULLUP(mp, hlen);
- if (mp == 0) {
- DPRINT2("ppp/%d: filter, pullup failed, len=%d\n",
- us->mn, hlen);
- return 0;
- }
- ip = (struct ip *)(mp->b_rptr + PPP_HDRLEN);
- }
-
- /* For IP traffic, certain packets (e.g., RIP) may be either
- * 1. ignored - dropped completely
- * 2. will not initiate a connection, but
- * will be passed if a connection is currently up.
- */
- for (pft=pktfilt_tab; pft->proto != -1; pft++) {
- if (ip->ip_p == pft->proto) {
- switch(pft->proto) {
- case IPPROTO_UDP:
- if (((struct udphdr *) &((int *)ip)[ip->ip_hl])->uh_dport
- == htons(pft->port)) goto endfor;
- break;
- case IPPROTO_TCP:
- if (((struct tcphdr *) &((int *)ip)[ip->ip_hl])->th_dport
- == htons(pft->port)) goto endfor;
- break;
- }
- }
- }
- endfor:
- if (pft->proto != -1) {
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: found IP pkt, proto=0x%x (%d)\n",
- us->mn, pft->proto, pft->port);
- /* Discard if not connected, or if not pass_with_link_up */
- /* else, if link is up let go by, but don't update time */
- return pft->ok_if_link_up? -1: 0;
- }
- break;
- } /* end switch (proto) */
-
- return 1;
-}
-#endif /* FILTER_PACKETS */
-
diff --git a/mdk-stage1/ppp/modules/ppp_ahdlc.c b/mdk-stage1/ppp/modules/ppp_ahdlc.c
deleted file mode 100644
index d0b961258..000000000
--- a/mdk-stage1/ppp/modules/ppp_ahdlc.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/*
- * ppp_ahdlc.c - STREAMS module for doing PPP asynchronous HDLC.
- *
- * Re-written by Adi Masputra <adi.masputra@sun.com>, based on
- * the original ppp_ahdlc.c
- *
- * Copyright (c) 2000 by Sun Microsystems, Inc.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.
- *
- * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF
- * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
- * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SUN SHALL NOT BE LIABLE FOR
- * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
- * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stream.h>
-#include <sys/errno.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/kmem.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Right now, mutex is only enabled for Solaris 2.x
- */
-#if defined(SOL2)
-#define USE_MUTEX
-#endif /* SOL2 */
-
-/*
- * intpointer_t and uintpointer_t are signed and unsigned integer types
- * large enough to hold any data pointer; that is, data pointers can be
- * assigned into or from these integer types without losing precision.
- * On recent Solaris releases, these types are defined in sys/int_types.h,
- * but not on SunOS 4.x or the earlier Solaris versions.
- */
-#if defined(_LP64) || defined(_I32LPx)
-typedef long intpointer_t;
-typedef unsigned long uintpointer_t;
-#else
-typedef int intpointer_t;
-typedef unsigned int uintpointer_t;
-#endif
-
-MOD_OPEN_DECL(ahdlc_open);
-MOD_CLOSE_DECL(ahdlc_close);
-static int ahdlc_wput __P((queue_t *, mblk_t *));
-static int ahdlc_rput __P((queue_t *, mblk_t *));
-static void ahdlc_encode __P((queue_t *, mblk_t *));
-static void ahdlc_decode __P((queue_t *, mblk_t *));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-#if defined(SOL2)
-/*
- * Don't send HDLC start flag is last transmit is within 1.5 seconds -
- * FLAG_TIME is defined is microseconds
- */
-#define FLAG_TIME 1500
-#define ABS(x) (x >= 0 ? x : (-x))
-#endif /* SOL2 */
-
-/*
- * Extract byte i of message mp
- */
-#define MSG_BYTE(mp, i) ((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
- msg_byte((mp), (i)))
-
-/*
- * Is this LCP packet one we have to transmit using LCP defaults?
- */
-#define LCP_USE_DFLT(mp) (1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-/*
- * Standard STREAMS declarations
- */
-static struct module_info minfo = {
- 0x7d23, "ppp_ahdl", 0, INFPSZ, 32768, 512
-};
-
-static struct qinit rinit = {
- ahdlc_rput, NULL, ahdlc_open, ahdlc_close, NULL, &minfo, NULL
-};
-
-static struct qinit winit = {
- ahdlc_wput, NULL, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int phdldevflag = 0;
-#define ppp_ahdlcinfo phdlinfo
-#endif /* defined(SVR4) && !defined(SOL2) */
-
-struct streamtab ppp_ahdlcinfo = {
- &rinit, /* ptr to st_rdinit */
- &winit, /* ptr to st_wrinit */
- NULL, /* ptr to st_muxrinit */
- NULL, /* ptr to st_muxwinit */
-#if defined(SUNOS4)
- NULL /* ptr to ptr to st_modlist */
-#endif /* SUNOS4 */
-};
-
-#if defined(SUNOS4)
-int ppp_ahdlc_count = 0; /* open counter */
-#endif /* SUNOS4 */
-
-/*
- * Per-stream state structure
- */
-typedef struct ahdlc_state {
-#if defined(USE_MUTEX)
- kmutex_t lock; /* lock for this structure */
-#endif /* USE_MUTEX */
- int flags; /* link flags */
- mblk_t *rx_buf; /* ptr to receive buffer */
- int rx_buf_size; /* receive buffer size */
- ushort_t infcs; /* calculated rx HDLC FCS */
- u_int32_t xaccm[8]; /* 256-bit xmit ACCM */
- u_int32_t raccm; /* 32-bit rcv ACCM */
- int mtu; /* interface MTU */
- int mru; /* link MRU */
- int unit; /* current PPP unit number */
- struct pppstat stats; /* statistic structure */
-#if defined(SOL2)
- clock_t flag_time; /* time in usec between flags */
- clock_t lbolt; /* last updated lbolt */
-#endif /* SOL2 */
-} ahdlc_state_t;
-
-/*
- * Values for flags
- */
-#define ESCAPED 0x100 /* last saw escape char on input */
-#define IFLUSH 0x200 /* flushing input due to error */
-
-/*
- * RCV_B7_1, etc., defined in net/pppio.h, are stored in flags also.
- */
-#define RCV_FLAGS (RCV_B7_1|RCV_B7_0|RCV_ODDP|RCV_EVNP)
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
- 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
- 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
- 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
- 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
- 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
- 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
- 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
- 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
- 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
- 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
- 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
- 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
- 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
- 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
- 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
- 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
- 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
- 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
- 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
- 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
- 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
- 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
- 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
- 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
- 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
- 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
- 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
- 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
- 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
- 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
- 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
- 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-static u_int32_t paritytab[8] =
-{
- 0x96696996, 0x69969669, 0x69969669, 0x96696996,
- 0x69969669, 0x96696996, 0x96696996, 0x69969669
-};
-
-/*
- * STREAMS module open (entry) point
- */
-MOD_OPEN(ahdlc_open)
-{
- ahdlc_state_t *state;
-
- /*
- * Return if it's already opened
- */
- if (q->q_ptr) {
- return 0;
- }
-
- /*
- * This can only be opened as a module
- */
- if (sflag != MODOPEN) {
- return 0;
- }
-
- state = (ahdlc_state_t *) ALLOC_NOSLEEP(sizeof(ahdlc_state_t));
- if (state == 0)
- OPEN_ERROR(ENOSR);
- bzero((caddr_t) state, sizeof(ahdlc_state_t));
-
- q->q_ptr = (caddr_t) state;
- WR(q)->q_ptr = (caddr_t) state;
-
-#if defined(USE_MUTEX)
- mutex_init(&state->lock, NULL, MUTEX_DEFAULT, NULL);
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
- state->xaccm[0] = ~0; /* escape 0x00 through 0x1f */
- state->xaccm[3] = 0x60000000; /* escape 0x7d and 0x7e */
- state->mru = PPP_MRU; /* default of 1500 bytes */
-#if defined(SOL2)
- state->flag_time = drv_usectohz(FLAG_TIME);
-#endif /* SOL2 */
-
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-
-#if defined(SUNOS4)
- ppp_ahdlc_count++;
-#endif /* SUNOS4 */
-
- qprocson(q);
-
- return 0;
-}
-
-/*
- * STREAMS module close (exit) point
- */
-MOD_CLOSE(ahdlc_close)
-{
- ahdlc_state_t *state;
-
- qprocsoff(q);
-
- state = (ahdlc_state_t *) q->q_ptr;
-
- if (state == 0) {
- DPRINT("state == 0 in ahdlc_close\n");
- return 0;
- }
-
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
- if (state->rx_buf != 0) {
- freemsg(state->rx_buf);
- state->rx_buf = 0;
- }
-
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
- mutex_destroy(&state->lock);
-#endif /* USE_MUTEX */
-
- FREE(q->q_ptr, sizeof(ahdlc_state_t));
- q->q_ptr = NULL;
- OTHERQ(q)->q_ptr = NULL;
-
-#if defined(SUNOS4)
- if (ppp_ahdlc_count)
- ppp_ahdlc_count--;
-#endif /* SUNOS4 */
-
- return 0;
-}
-
-/*
- * Write side put routine
- */
-static int
-ahdlc_wput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- ahdlc_state_t *state;
- struct iocblk *iop;
- int error;
- mblk_t *np;
- struct ppp_stats *psp;
-
- state = (ahdlc_state_t *) q->q_ptr;
- if (state == 0) {
- DPRINT("state == 0 in ahdlc_wput\n");
- freemsg(mp);
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
- case M_DATA:
- /*
- * A data packet - do character-stuffing and FCS, and
- * send it onwards.
- */
- ahdlc_encode(q, mp);
- freemsg(mp);
- break;
-
- case M_IOCTL:
- iop = (struct iocblk *) mp->b_rptr;
- error = EINVAL;
- switch (iop->ioc_cmd) {
- case PPPIO_XACCM:
- if ((iop->ioc_count < sizeof(u_int32_t)) ||
- (iop->ioc_count > sizeof(ext_accm))) {
- break;
- }
- if (mp->b_cont == 0) {
- DPRINT1("ahdlc_wput/%d: PPPIO_XACCM b_cont = 0!\n", state->unit);
- break;
- }
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)state->xaccm,
- iop->ioc_count);
- state->xaccm[2] &= ~0x40000000; /* don't escape 0x5e */
- state->xaccm[3] |= 0x60000000; /* do escape 0x7d, 0x7e */
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- iop->ioc_count = 0;
- error = 0;
- break;
-
- case PPPIO_RACCM:
- if (iop->ioc_count != sizeof(u_int32_t))
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ahdlc_wput/%d: PPPIO_RACCM b_cont = 0!\n", state->unit);
- break;
- }
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)&state->raccm,
- sizeof(u_int32_t));
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- iop->ioc_count = 0;
- error = 0;
- break;
-
- case PPPIO_GCLEAN:
- np = allocb(sizeof(int), BPRI_HI);
- if (np == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = np;
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- *(int *)np->b_wptr = state->flags & RCV_FLAGS;
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- np->b_wptr += sizeof(int);
- iop->ioc_count = sizeof(int);
- error = 0;
- break;
-
- case PPPIO_GETSTAT:
- np = allocb(sizeof(struct ppp_stats), BPRI_HI);
- if (np == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = np;
- psp = (struct ppp_stats *) np->b_wptr;
- np->b_wptr += sizeof(struct ppp_stats);
- bzero((caddr_t)psp, sizeof(struct ppp_stats));
- psp->p = state->stats;
- iop->ioc_count = sizeof(struct ppp_stats);
- error = 0;
- break;
-
- case PPPIO_LASTMOD:
- /* we knew this anyway */
- error = 0;
- break;
-
- default:
- error = -1;
- break;
- }
-
- if (error < 0)
- putnext(q, mp);
- else if (error == 0) {
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
- } else {
- mp->b_datap->db_type = M_IOCNAK;
- iop->ioc_count = 0;
- iop->ioc_error = error;
- qreply(q, mp);
- }
- break;
-
- case M_CTL:
- switch (*mp->b_rptr) {
- case PPPCTL_MTU:
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- state->mtu = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- freemsg(mp);
- break;
- case PPPCTL_MRU:
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- state->mru = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- freemsg(mp);
- break;
- case PPPCTL_UNIT:
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- state->unit = mp->b_rptr[1];
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- break;
- default:
- putnext(q, mp);
- }
- break;
-
- default:
- putnext(q, mp);
- }
-
- return 0;
-}
-
-/*
- * Read side put routine
- */
-static int
-ahdlc_rput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- ahdlc_state_t *state;
-
- state = (ahdlc_state_t *) q->q_ptr;
- if (state == 0) {
- DPRINT("state == 0 in ahdlc_rput\n");
- freemsg(mp);
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
- case M_DATA:
- ahdlc_decode(q, mp);
- freemsg(mp);
- break;
-
- case M_HANGUP:
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- if (state->rx_buf != 0) {
- /* XXX would like to send this up for debugging */
- freemsg(state->rx_buf);
- state->rx_buf = 0;
- }
- state->flags = IFLUSH;
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- putnext(q, mp);
- break;
-
- default:
- putnext(q, mp);
- }
- return 0;
-}
-
-/*
- * Extract bit c from map m, to determine if c needs to be escaped
- */
-#define IN_TX_MAP(c, m) ((m)[(c) >> 5] & (1 << ((c) & 0x1f)))
-
-static void
-ahdlc_encode(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- ahdlc_state_t *state;
- u_int32_t *xaccm, loc_xaccm[8];
- ushort_t fcs;
- size_t outmp_len;
- mblk_t *outmp, *tmp;
- uchar_t *dp, fcs_val;
- int is_lcp, code;
-#if defined(SOL2)
- clock_t lbolt;
-#endif /* SOL2 */
-
- if (msgdsize(mp) < 4) {
- return;
- }
-
- state = (ahdlc_state_t *)q->q_ptr;
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
- /*
- * Allocate an output buffer large enough to handle a case where all
- * characters need to be escaped
- */
- outmp_len = (msgdsize(mp) << 1) + /* input block x 2 */
- (sizeof(fcs) << 2) + /* HDLC FCS x 4 */
- (sizeof(uchar_t) << 1); /* HDLC flags x 2 */
-
- outmp = allocb(outmp_len, BPRI_MED);
- if (outmp == NULL) {
- state->stats.ppp_oerrors++;
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
- return;
- }
-
-#if defined(SOL2)
- /*
- * Check if our last transmit happenned within flag_time, using
- * the system's LBOLT value in clock ticks
- */
- if (drv_getparm(LBOLT, &lbolt) != -1) {
- if (ABS((clock_t)lbolt - state->lbolt) > state->flag_time) {
- *outmp->b_wptr++ = PPP_FLAG;
- }
- state->lbolt = lbolt;
- } else {
- *outmp->b_wptr++ = PPP_FLAG;
- }
-#else
- /*
- * If the driver below still has a message to process, skip the
- * HDLC flag, otherwise, put one in the beginning
- */
- if (qsize(q->q_next) == 0) {
- *outmp->b_wptr++ = PPP_FLAG;
- }
-#endif
-
- /*
- * All control characters must be escaped for LCP packets with code
- * values between 1 (Conf-Req) and 7 (Code-Rej).
- */
- is_lcp = ((MSG_BYTE(mp, 0) == PPP_ALLSTATIONS) &&
- (MSG_BYTE(mp, 1) == PPP_UI) &&
- (MSG_BYTE(mp, 2) == (PPP_LCP >> 8)) &&
- (MSG_BYTE(mp, 3) == (PPP_LCP & 0xff)) &&
- LCP_USE_DFLT(mp));
-
- xaccm = state->xaccm;
- if (is_lcp) {
- bcopy((caddr_t)state->xaccm, (caddr_t)loc_xaccm, sizeof(loc_xaccm));
- loc_xaccm[0] = ~0; /* force escape on 0x00 through 0x1f */
- xaccm = loc_xaccm;
- }
-
- fcs = PPP_INITFCS; /* Initial FCS is 0xffff */
-
- /*
- * Process this block and the rest (if any) attached to the this one
- */
- for (tmp = mp; tmp; tmp = tmp->b_cont) {
- if (tmp->b_datap->db_type == M_DATA) {
- for (dp = tmp->b_rptr; dp < tmp->b_wptr; dp++) {
- fcs = PPP_FCS(fcs, *dp);
- if (IN_TX_MAP(*dp, xaccm)) {
- *outmp->b_wptr++ = PPP_ESCAPE;
- *outmp->b_wptr++ = *dp ^ PPP_TRANS;
- } else {
- *outmp->b_wptr++ = *dp;
- }
- }
- } else {
- continue; /* skip if db_type is something other than M_DATA */
- }
- }
-
- /*
- * Append the HDLC FCS, making sure that escaping is done on any
- * necessary bytes
- */
- fcs_val = (fcs ^ 0xffff) & 0xff;
- if (IN_TX_MAP(fcs_val, xaccm)) {
- *outmp->b_wptr++ = PPP_ESCAPE;
- *outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
- } else {
- *outmp->b_wptr++ = fcs_val;
- }
-
- fcs_val = ((fcs ^ 0xffff) >> 8) & 0xff;
- if (IN_TX_MAP(fcs_val, xaccm)) {
- *outmp->b_wptr++ = PPP_ESCAPE;
- *outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
- } else {
- *outmp->b_wptr++ = fcs_val;
- }
-
- /*
- * And finally, append the HDLC flag, and send it away
- */
- *outmp->b_wptr++ = PPP_FLAG;
-
- state->stats.ppp_obytes += msgdsize(outmp);
- state->stats.ppp_opackets++;
-
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-
- putnext(q, outmp);
- return;
-}
-
-/*
- * Checks the 32-bit receive ACCM to see if the byte needs un-escaping
- */
-#define IN_RX_MAP(c, m) ((((unsigned int) (uchar_t) (c)) < 0x20) && \
- (m) & (1 << (c)))
-
-
-/*
- * Process received characters.
- */
-static void
-ahdlc_decode(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- ahdlc_state_t *state;
- mblk_t *om;
- uchar_t *dp;
- ushort_t fcs;
-#if defined(SOL2)
- mblk_t *zmp;
-#endif /* SOL2 */
-
-#if defined(SOL2)
- /*
- * In case the driver (or something below) doesn't send
- * data upstream in one message block, concatenate everything
- */
- if (!((mp->b_wptr - mp->b_rptr == msgdsize(mp)) &&
- ((intpointer_t)mp->b_rptr % sizeof(intpointer_t) == 0))) {
-
- zmp = msgpullup(mp, -1);
- freemsg(mp);
- mp = zmp;
- if (mp == 0)
- return;
- }
-#endif /* SOL2 */
-
- state = (ahdlc_state_t *) q->q_ptr;
-
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
- state->stats.ppp_ibytes += msgdsize(mp);
-
- for (dp = mp->b_rptr; dp < mp->b_wptr; dp++) {
-
- /*
- * This should detect the lack of 8-bit communication channel
- * which is necessary for PPP to work. In addition, it also
- * checks on the parity.
- */
- if (*dp & 0x80)
- state->flags |= RCV_B7_1;
- else
- state->flags |= RCV_B7_0;
-
- if (paritytab[*dp >> 5] & (1 << (*dp & 0x1f)))
- state->flags |= RCV_ODDP;
- else
- state->flags |= RCV_EVNP;
-
- /*
- * So we have a HDLC flag ...
- */
- if (*dp == PPP_FLAG) {
-
- /*
- * If we think that it marks the beginning of the frame,
- * then continue to process the next octects
- */
- if ((state->flags & IFLUSH) ||
- (state->rx_buf == 0) ||
- (msgdsize(state->rx_buf) == 0)) {
-
- state->flags &= ~IFLUSH;
- continue;
- }
-
- /*
- * We get here because the above condition isn't true,
- * in which case the HDLC flag was there to mark the end
- * of the frame (or so we think)
- */
- om = state->rx_buf;
-
- if (state->infcs == PPP_GOODFCS) {
- state->stats.ppp_ipackets++;
- adjmsg(om, -PPP_FCSLEN);
- putnext(q, om);
- } else {
- DPRINT2("ppp%d: bad fcs (len=%d)\n",
- state->unit, msgdsize(state->rx_buf));
- freemsg(state->rx_buf);
- state->flags &= ~(IFLUSH | ESCAPED);
- state->stats.ppp_ierrors++;
- putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
- }
-
- state->rx_buf = 0;
- continue;
- }
-
- if (state->flags & IFLUSH) {
- continue;
- }
-
- /*
- * Allocate a receive buffer, large enough to store a frame (after
- * un-escaping) of at least 1500 octets. If MRU is negotiated to
- * be more than the default, then allocate that much. In addition,
- * we add an extra 32-bytes for a fudge factor
- */
- if (state->rx_buf == 0) {
- state->rx_buf_size = (state->mru < PPP_MRU ? PPP_MRU : state->mru);
- state->rx_buf_size += (sizeof(u_int32_t) << 3);
- state->rx_buf = allocb(state->rx_buf_size, BPRI_MED);
-
- /*
- * If allocation fails, try again on the next frame
- */
- if (state->rx_buf == 0) {
- state->flags |= IFLUSH;
- continue;
- }
- state->flags &= ~(IFLUSH | ESCAPED);
- state->infcs = PPP_INITFCS;
- }
-
- if (*dp == PPP_ESCAPE) {
- state->flags |= ESCAPED;
- continue;
- }
-
- /*
- * Make sure we un-escape the necessary characters, as well as the
- * ones in our receive async control character map
- */
- if (state->flags & ESCAPED) {
- *dp ^= PPP_TRANS;
- state->flags &= ~ESCAPED;
- } else if (IN_RX_MAP(*dp, state->raccm))
- continue;
-
- /*
- * Unless the peer lied to us about the negotiated MRU, we should
- * never get a frame which is too long. If it happens, toss it away
- * and grab the next incoming one
- */
- if (msgdsize(state->rx_buf) < state->rx_buf_size) {
- state->infcs = PPP_FCS(state->infcs, *dp);
- *state->rx_buf->b_wptr++ = *dp;
- } else {
- DPRINT2("ppp%d: frame too long (%d)\n",
- state->unit, msgdsize(state->rx_buf));
- freemsg(state->rx_buf);
- state->rx_buf = 0;
- state->flags |= IFLUSH;
- }
- }
-
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-}
-
-static int
-msg_byte(mp, i)
- mblk_t *mp;
- unsigned int i;
-{
- while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
- mp = mp->b_cont;
- if (mp == 0)
- return -1;
- return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/modules/ppp_comp.c b/mdk-stage1/ppp/modules/ppp_comp.c
deleted file mode 100644
index f6eef5ab1..000000000
--- a/mdk-stage1/ppp/modules/ppp_comp.c
+++ /dev/null
@@ -1,1126 +0,0 @@
-/*
- * ppp_comp.c - STREAMS module for kernel-level compression and CCP support.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under SVR4, Solaris 2, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/errno.h>
-#include <sys/stream.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-#ifdef __osf__
-#include <sys/mbuf.h>
-#include <sys/protosw.h>
-#endif
-
-#include <netinet/in.h>
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <net/vjcompress.h>
-
-#define PACKETPTR mblk_t *
-#include <net/ppp-comp.h>
-
-MOD_OPEN_DECL(ppp_comp_open);
-MOD_CLOSE_DECL(ppp_comp_close);
-static int ppp_comp_rput __P((queue_t *, mblk_t *));
-static int ppp_comp_rsrv __P((queue_t *));
-static int ppp_comp_wput __P((queue_t *, mblk_t *));
-static int ppp_comp_wsrv __P((queue_t *));
-static void ppp_comp_ccp __P((queue_t *, mblk_t *, int));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-/* Extract byte i of message mp. */
-#define MSG_BYTE(mp, i) ((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
- msg_byte((mp), (i)))
-
-/* Is this LCP packet one we have to transmit using LCP defaults? */
-#define LCP_USE_DFLT(mp) (1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-#define PPP_COMP_ID 0xbadf
-static struct module_info minfo = {
-#ifdef PRIOQ
- PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16512, 16384,
-#else
- PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16384, 4096,
-#endif
-};
-
-static struct qinit r_init = {
- ppp_comp_rput, ppp_comp_rsrv, ppp_comp_open, ppp_comp_close,
- NULL, &minfo, NULL
-};
-
-static struct qinit w_init = {
- ppp_comp_wput, ppp_comp_wsrv, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int pcmpdevflag = 0;
-#define ppp_compinfo pcmpinfo
-#endif
-struct streamtab ppp_compinfo = {
- &r_init, &w_init, NULL, NULL
-};
-
-int ppp_comp_count; /* number of module instances in use */
-
-#ifdef __osf__
-
-static void ppp_comp_alloc __P((comp_state_t *));
-typedef struct memreq {
- unsigned char comp_opts[20];
- int cmd;
- int thread_status;
- char *returned_mem;
-} memreq_t;
-
-#endif
-
-typedef struct comp_state {
- int flags;
- int mru;
- int mtu;
- int unit;
- struct compressor *xcomp;
- void *xstate;
- struct compressor *rcomp;
- void *rstate;
- struct vjcompress vj_comp;
- int vj_last_ierrors;
- struct pppstat stats;
-#ifdef __osf__
- memreq_t memreq;
- thread_t thread;
-#endif
-} comp_state_t;
-
-
-#ifdef __osf__
-extern task_t first_task;
-#endif
-
-/* Bits in flags are as defined in pppio.h. */
-#define CCP_ERR (CCP_ERROR | CCP_FATALERROR)
-#define LAST_MOD 0x1000000 /* no ppp modules below us */
-#define DBGLOG 0x2000000 /* log debugging stuff */
-
-#define MAX_IPHDR 128 /* max TCP/IP header size */
-#define MAX_VJHDR 20 /* max VJ compressed header size (?) */
-
-#undef MIN /* just in case */
-#define MIN(a, b) ((a) < (b)? (a): (b))
-
-/*
- * List of compressors we know about.
- */
-
-#if DO_BSD_COMPRESS
-extern struct compressor ppp_bsd_compress;
-#endif
-#if DO_DEFLATE
-extern struct compressor ppp_deflate, ppp_deflate_draft;
-#endif
-
-struct compressor *ppp_compressors[] = {
-#if DO_BSD_COMPRESS
- &ppp_bsd_compress,
-#endif
-#if DO_DEFLATE
- &ppp_deflate,
- &ppp_deflate_draft,
-#endif
- NULL
-};
-
-/*
- * STREAMS module entry points.
- */
-MOD_OPEN(ppp_comp_open)
-{
- comp_state_t *cp;
-#ifdef __osf__
- thread_t thread;
-#endif
-
- if (q->q_ptr == NULL) {
- cp = (comp_state_t *) ALLOC_SLEEP(sizeof(comp_state_t));
- if (cp == NULL)
- OPEN_ERROR(ENOSR);
- bzero((caddr_t)cp, sizeof(comp_state_t));
- WR(q)->q_ptr = q->q_ptr = (caddr_t) cp;
- cp->mru = PPP_MRU;
- cp->mtu = PPP_MTU;
- cp->xstate = NULL;
- cp->rstate = NULL;
- vj_compress_init(&cp->vj_comp, -1);
-#ifdef __osf__
- if (!(thread = kernel_thread_w_arg(first_task, ppp_comp_alloc, (void *)cp)))
- OPEN_ERROR(ENOSR);
- cp->thread = thread;
-#endif
- ++ppp_comp_count;
- qprocson(q);
- }
- return 0;
-}
-
-MOD_CLOSE(ppp_comp_close)
-{
- comp_state_t *cp;
-
- qprocsoff(q);
- cp = (comp_state_t *) q->q_ptr;
- if (cp != NULL) {
- if (cp->xstate != NULL)
- (*cp->xcomp->comp_free)(cp->xstate);
- if (cp->rstate != NULL)
- (*cp->rcomp->decomp_free)(cp->rstate);
-#ifdef __osf__
- if (!cp->thread)
- printf("ppp_comp_close: NULL thread!\n");
- else
- thread_terminate(cp->thread);
-#endif
- FREE(cp, sizeof(comp_state_t));
- q->q_ptr = NULL;
- OTHERQ(q)->q_ptr = NULL;
- --ppp_comp_count;
- }
- return 0;
-}
-
-#ifdef __osf__
-
-/* thread for calling back to a compressor's memory allocator
- * Needed for Digital UNIX since it's VM can't handle requests
- * for large amounts of memory without blocking. The thread
- * provides a context in which we can call a memory allocator
- * that may block.
- */
-static void
-ppp_comp_alloc(comp_state_t *cp)
-{
- int len, cmd;
- unsigned char *compressor_options;
- thread_t thread;
- void *(*comp_allocator)();
-
-
-#if defined(MAJOR_VERSION) && (MAJOR_VERSION <= 2)
-
- /* In 2.x and earlier the argument gets passed
- * in the thread structure itself. Yuck.
- */
- thread = current_thread();
- cp = thread->reply_port;
- thread->reply_port = PORT_NULL;
-
-#endif
-
- for (;;) {
- assert_wait((vm_offset_t)&cp->memreq.thread_status, TRUE);
- thread_block();
-
- if (thread_should_halt(current_thread()))
- thread_halt_self();
- cmd = cp->memreq.cmd;
- compressor_options = &cp->memreq.comp_opts[0];
- len = compressor_options[1];
- if (cmd == PPPIO_XCOMP) {
- cp->memreq.returned_mem = cp->xcomp->comp_alloc(compressor_options, len);
- if (!cp->memreq.returned_mem) {
- cp->memreq.thread_status = ENOSR;
- } else {
- cp->memreq.thread_status = 0;
- }
- } else {
- cp->memreq.returned_mem = cp->rcomp->decomp_alloc(compressor_options, len);
- if (!cp->memreq.returned_mem) {
- cp->memreq.thread_status = ENOSR;
- } else {
- cp->memreq.thread_status = 0;
- }
- }
- }
-}
-
-#endif /* __osf__ */
-
-/* here's the deal with memory allocation under Digital UNIX.
- * Some other may also benefit from this...
- * We can't ask for huge chunks of memory in a context where
- * the caller can't be put to sleep (like, here.) The alloc
- * is likely to fail. Instead we do this: the first time we
- * get called, kick off a thread to do the allocation. Return
- * immediately to the caller with EAGAIN, as an indication that
- * they should send down the ioctl again. By the time the
- * second call comes in it's likely that the memory allocation
- * thread will have returned with the requested memory. We will
- * continue to return EAGAIN however until the thread has completed.
- * When it has, we return zero (and the memory) if the allocator
- * was successful and ENOSR otherwise.
- *
- * Callers of the RCOMP and XCOMP ioctls are encouraged (but not
- * required) to loop for some number of iterations with a small
- * delay in the loop body (for instance a 1/10-th second "sleep"
- * via select.)
- */
-static int
-ppp_comp_wput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- struct iocblk *iop;
- comp_state_t *cp;
- int error, len, n;
- int flags, mask;
- mblk_t *np;
- struct compressor **comp;
- struct ppp_stats *psp;
- struct ppp_comp_stats *csp;
- unsigned char *opt_data;
- int nxslots, nrslots;
-
- cp = (comp_state_t *) q->q_ptr;
- if (cp == 0) {
- DPRINT("cp == 0 in ppp_comp_wput\n");
- freemsg(mp);
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
-
- case M_DATA:
- putq(q, mp);
- break;
-
- case M_IOCTL:
- iop = (struct iocblk *) mp->b_rptr;
- error = EINVAL;
- switch (iop->ioc_cmd) {
-
- case PPPIO_CFLAGS:
- /* set/get CCP state */
- if (iop->ioc_count != 2 * sizeof(int))
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ppp_comp_wput/%d: PPPIO_CFLAGS b_cont = 0!\n", cp->unit);
- break;
- }
- flags = ((int *) mp->b_cont->b_rptr)[0];
- mask = ((int *) mp->b_cont->b_rptr)[1];
- cp->flags = (cp->flags & ~mask) | (flags & mask);
- if ((mask & CCP_ISOPEN) && (flags & CCP_ISOPEN) == 0) {
- if (cp->xstate != NULL) {
- (*cp->xcomp->comp_free)(cp->xstate);
- cp->xstate = NULL;
- }
- if (cp->rstate != NULL) {
- (*cp->rcomp->decomp_free)(cp->rstate);
- cp->rstate = NULL;
- }
- cp->flags &= ~CCP_ISUP;
- }
- error = 0;
- iop->ioc_count = sizeof(int);
- ((int *) mp->b_cont->b_rptr)[0] = cp->flags;
- mp->b_cont->b_wptr = mp->b_cont->b_rptr + sizeof(int);
- break;
-
- case PPPIO_VJINIT:
- /*
- * Initialize VJ compressor/decompressor
- */
- if (iop->ioc_count != 2)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ppp_comp_wput/%d: PPPIO_VJINIT b_cont = 0!\n", cp->unit);
- break;
- }
- nxslots = mp->b_cont->b_rptr[0] + 1;
- nrslots = mp->b_cont->b_rptr[1] + 1;
- if (nxslots > MAX_STATES || nrslots > MAX_STATES)
- break;
- vj_compress_init(&cp->vj_comp, nxslots);
- cp->vj_last_ierrors = cp->stats.ppp_ierrors;
- error = 0;
- iop->ioc_count = 0;
- break;
-
- case PPPIO_XCOMP:
- case PPPIO_RCOMP:
- if (iop->ioc_count <= 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ppp_comp_wput/%d: PPPIO_[XR]COMP b_cont = 0!\n", cp->unit);
- break;
- }
- opt_data = mp->b_cont->b_rptr;
- len = mp->b_cont->b_wptr - opt_data;
- if (len > iop->ioc_count)
- len = iop->ioc_count;
- if (opt_data[1] < 2 || opt_data[1] > len)
- break;
- for (comp = ppp_compressors; *comp != NULL; ++comp)
- if ((*comp)->compress_proto == opt_data[0]) {
- /* here's the handler! */
- error = 0;
-#ifndef __osf__
- if (iop->ioc_cmd == PPPIO_XCOMP) {
- /* A previous call may have fetched memory for a compressor
- * that's now being retired or reset. Free it using it's
- * mechanism for freeing stuff.
- */
- if (cp->xstate != NULL) {
- (*cp->xcomp->comp_free)(cp->xstate);
- cp->xstate = NULL;
- }
- cp->xcomp = *comp;
- cp->xstate = (*comp)->comp_alloc(opt_data, len);
- if (cp->xstate == NULL)
- error = ENOSR;
- } else {
- if (cp->rstate != NULL) {
- (*cp->rcomp->decomp_free)(cp->rstate);
- cp->rstate = NULL;
- }
- cp->rcomp = *comp;
- cp->rstate = (*comp)->decomp_alloc(opt_data, len);
- if (cp->rstate == NULL)
- error = ENOSR;
- }
-#else
- if ((error = cp->memreq.thread_status) != EAGAIN)
- if (iop->ioc_cmd == PPPIO_XCOMP) {
- if (cp->xstate) {
- (*cp->xcomp->comp_free)(cp->xstate);
- cp->xstate = 0;
- }
- /* sanity check for compressor options
- */
- if (sizeof (cp->memreq.comp_opts) < len) {
- printf("can't handle options for compressor %d (%d)\n", opt_data[0],
- opt_data[1]);
- cp->memreq.thread_status = ENOSR;
- cp->memreq.returned_mem = 0;
- }
- /* fill in request for the thread and kick it off
- */
- if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
- bcopy(opt_data, cp->memreq.comp_opts, len);
- cp->memreq.cmd = PPPIO_XCOMP;
- cp->xcomp = *comp;
- error = cp->memreq.thread_status = EAGAIN;
- thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
- } else {
- cp->xstate = cp->memreq.returned_mem;
- cp->memreq.returned_mem = 0;
- cp->memreq.thread_status = 0;
- }
- } else {
- if (cp->rstate) {
- (*cp->rcomp->decomp_free)(cp->rstate);
- cp->rstate = NULL;
- }
- if (sizeof (cp->memreq.comp_opts) < len) {
- printf("can't handle options for compressor %d (%d)\n", opt_data[0],
- opt_data[1]);
- cp->memreq.thread_status = ENOSR;
- cp->memreq.returned_mem = 0;
- }
- if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
- bcopy(opt_data, cp->memreq.comp_opts, len);
- cp->memreq.cmd = PPPIO_RCOMP;
- cp->rcomp = *comp;
- error = cp->memreq.thread_status = EAGAIN;
- thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
- } else {
- cp->rstate = cp->memreq.returned_mem;
- cp->memreq.returned_mem = 0;
- cp->memreq.thread_status = 0;
- }
- }
-#endif
- break;
- }
- iop->ioc_count = 0;
- break;
-
- case PPPIO_GETSTAT:
- if ((cp->flags & LAST_MOD) == 0) {
- error = -1; /* let the ppp_ahdl module handle it */
- break;
- }
- np = allocb(sizeof(struct ppp_stats), BPRI_HI);
- if (np == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = np;
- psp = (struct ppp_stats *) np->b_wptr;
- np->b_wptr += sizeof(struct ppp_stats);
- iop->ioc_count = sizeof(struct ppp_stats);
- psp->p = cp->stats;
- psp->vj = cp->vj_comp.stats;
- error = 0;
- break;
-
- case PPPIO_GETCSTAT:
- np = allocb(sizeof(struct ppp_comp_stats), BPRI_HI);
- if (np == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = np;
- csp = (struct ppp_comp_stats *) np->b_wptr;
- np->b_wptr += sizeof(struct ppp_comp_stats);
- iop->ioc_count = sizeof(struct ppp_comp_stats);
- bzero((caddr_t)csp, sizeof(struct ppp_comp_stats));
- if (cp->xstate != 0)
- (*cp->xcomp->comp_stat)(cp->xstate, &csp->c);
- if (cp->rstate != 0)
- (*cp->rcomp->decomp_stat)(cp->rstate, &csp->d);
- error = 0;
- break;
-
- case PPPIO_DEBUG:
- if (iop->ioc_count != sizeof(int))
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ppp_comp_wput/%d: PPPIO_DEBUG b_cont = 0!\n", cp->unit);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- if (n == PPPDBG_LOG + PPPDBG_COMP) {
- DPRINT1("ppp_comp%d: debug log enabled\n", cp->unit);
- cp->flags |= DBGLOG;
- error = 0;
- iop->ioc_count = 0;
- } else {
- error = -1;
- }
- break;
-
- case PPPIO_LASTMOD:
- cp->flags |= LAST_MOD;
- error = 0;
- break;
-
- default:
- error = -1;
- break;
- }
-
- if (error < 0)
- putnext(q, mp);
- else if (error == 0) {
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
- } else {
- mp->b_datap->db_type = M_IOCNAK;
- iop->ioc_error = error;
- iop->ioc_count = 0;
- qreply(q, mp);
- }
- break;
-
- case M_CTL:
- switch (*mp->b_rptr) {
- case PPPCTL_MTU:
- cp->mtu = ((unsigned short *)mp->b_rptr)[1];
- break;
- case PPPCTL_MRU:
- cp->mru = ((unsigned short *)mp->b_rptr)[1];
- break;
- case PPPCTL_UNIT:
- cp->unit = mp->b_rptr[1];
- break;
- }
- putnext(q, mp);
- break;
-
- default:
- putnext(q, mp);
- }
-
- return 0;
-}
-
-static int
-ppp_comp_wsrv(q)
- queue_t *q;
-{
- mblk_t *mp, *cmp = NULL;
- comp_state_t *cp;
- int len, proto, type, hlen, code;
- struct ip *ip;
- unsigned char *vjhdr, *dp;
-
- cp = (comp_state_t *) q->q_ptr;
- if (cp == 0) {
- DPRINT("cp == 0 in ppp_comp_wsrv\n");
- return 0;
- }
-
- while ((mp = getq(q)) != 0) {
- /* assert(mp->b_datap->db_type == M_DATA) */
-#ifdef PRIOQ
- if (!bcanputnext(q,mp->b_band))
-#else
- if (!canputnext(q))
-#endif PRIOQ
- {
- putbq(q, mp);
- break;
- }
-
- /*
- * First check the packet length and work out what the protocol is.
- */
- len = msgdsize(mp);
- if (len < PPP_HDRLEN) {
- DPRINT1("ppp_comp_wsrv: bogus short packet (%d)\n", len);
- freemsg(mp);
- cp->stats.ppp_oerrors++;
- putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
- continue;
- }
- proto = (MSG_BYTE(mp, 2) << 8) + MSG_BYTE(mp, 3);
-
- /*
- * Make sure we've got enough data in the first mblk
- * and that we are its only user.
- */
- if (proto == PPP_CCP)
- hlen = len;
- else if (proto == PPP_IP)
- hlen = PPP_HDRLEN + MAX_IPHDR;
- else
- hlen = PPP_HDRLEN;
- if (hlen > len)
- hlen = len;
- if (mp->b_wptr < mp->b_rptr + hlen || mp->b_datap->db_ref > 1) {
- PULLUP(mp, hlen);
- if (mp == 0) {
- DPRINT1("ppp_comp_wsrv: pullup failed (%d)\n", hlen);
- cp->stats.ppp_oerrors++;
- putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
- continue;
- }
- }
-
- /*
- * Do VJ compression if requested.
- */
- if (proto == PPP_IP && (cp->flags & COMP_VJC)) {
- ip = (struct ip *) (mp->b_rptr + PPP_HDRLEN);
- if (ip->ip_p == IPPROTO_TCP) {
- type = vj_compress_tcp(ip, len - PPP_HDRLEN, &cp->vj_comp,
- (cp->flags & COMP_VJCCID), &vjhdr);
- switch (type) {
- case TYPE_UNCOMPRESSED_TCP:
- mp->b_rptr[3] = proto = PPP_VJC_UNCOMP;
- break;
- case TYPE_COMPRESSED_TCP:
- dp = vjhdr - PPP_HDRLEN;
- dp[1] = mp->b_rptr[1]; /* copy control field */
- dp[0] = mp->b_rptr[0]; /* copy address field */
- dp[2] = 0; /* set protocol field */
- dp[3] = proto = PPP_VJC_COMP;
- mp->b_rptr = dp;
- break;
- }
- }
- }
-
- /*
- * Do packet compression if enabled.
- */
- if (proto == PPP_CCP)
- ppp_comp_ccp(q, mp, 0);
- else if (proto != PPP_LCP && (cp->flags & CCP_COMP_RUN)
- && cp->xstate != NULL) {
- len = msgdsize(mp);
- (*cp->xcomp->compress)(cp->xstate, &cmp, mp, len,
- (cp->flags & CCP_ISUP? cp->mtu + PPP_HDRLEN: 0));
- if (cmp != NULL) {
-#ifdef PRIOQ
- cmp->b_band=mp->b_band;
-#endif PRIOQ
- freemsg(mp);
- mp = cmp;
- }
- }
-
- /*
- * Do address/control and protocol compression if enabled.
- */
- if ((cp->flags & COMP_AC)
- && !(proto == PPP_LCP && LCP_USE_DFLT(mp))) {
- mp->b_rptr += 2; /* drop the address & ctrl fields */
- if (proto < 0x100 && (cp->flags & COMP_PROT))
- ++mp->b_rptr; /* drop the high protocol byte */
- } else if (proto < 0x100 && (cp->flags & COMP_PROT)) {
- /* shuffle up the address & ctrl fields */
- mp->b_rptr[2] = mp->b_rptr[1];
- mp->b_rptr[1] = mp->b_rptr[0];
- ++mp->b_rptr;
- }
-
- cp->stats.ppp_opackets++;
- cp->stats.ppp_obytes += msgdsize(mp);
- putnext(q, mp);
- }
-
- return 0;
-}
-
-static int
-ppp_comp_rput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- comp_state_t *cp;
- struct iocblk *iop;
- struct ppp_stats *psp;
-
- cp = (comp_state_t *) q->q_ptr;
- if (cp == 0) {
- DPRINT("cp == 0 in ppp_comp_rput\n");
- freemsg(mp);
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
-
- case M_DATA:
- putq(q, mp);
- break;
-
- case M_IOCACK:
- iop = (struct iocblk *) mp->b_rptr;
- switch (iop->ioc_cmd) {
- case PPPIO_GETSTAT:
- /*
- * Catch this on the way back from the ppp_ahdl module
- * so we can fill in the VJ stats.
- */
- if (mp->b_cont == 0 || iop->ioc_count != sizeof(struct ppp_stats))
- break;
- psp = (struct ppp_stats *) mp->b_cont->b_rptr;
- psp->vj = cp->vj_comp.stats;
- break;
- }
- putnext(q, mp);
- break;
-
- case M_CTL:
- switch (mp->b_rptr[0]) {
- case PPPCTL_IERROR:
- ++cp->stats.ppp_ierrors;
- break;
- case PPPCTL_OERROR:
- ++cp->stats.ppp_oerrors;
- break;
- }
- putnext(q, mp);
- break;
-
- default:
- putnext(q, mp);
- }
-
- return 0;
-}
-
-static int
-ppp_comp_rsrv(q)
- queue_t *q;
-{
- int proto, rv, i;
- mblk_t *mp, *dmp = NULL, *np;
- uchar_t *dp, *iphdr;
- comp_state_t *cp;
- int len, hlen, vjlen;
- u_int iphlen;
-
- cp = (comp_state_t *) q->q_ptr;
- if (cp == 0) {
- DPRINT("cp == 0 in ppp_comp_rsrv\n");
- return 0;
- }
-
- while ((mp = getq(q)) != 0) {
- /* assert(mp->b_datap->db_type == M_DATA) */
- if (!canputnext(q)) {
- putbq(q, mp);
- break;
- }
-
- len = msgdsize(mp);
- cp->stats.ppp_ibytes += len;
- cp->stats.ppp_ipackets++;
-
- /*
- * First work out the protocol and where the PPP header ends.
- */
- i = 0;
- proto = MSG_BYTE(mp, 0);
- if (proto == PPP_ALLSTATIONS) {
- i = 2;
- proto = MSG_BYTE(mp, 2);
- }
- if ((proto & 1) == 0) {
- ++i;
- proto = (proto << 8) + MSG_BYTE(mp, i);
- }
- hlen = i + 1;
-
- /*
- * Now reconstruct a complete, contiguous PPP header at the
- * start of the packet.
- */
- if (hlen < ((cp->flags & DECOMP_AC)? 0: 2)
- + ((cp->flags & DECOMP_PROT)? 1: 2)) {
- /* count these? */
- goto bad;
- }
- if (mp->b_rptr + hlen > mp->b_wptr) {
- adjmsg(mp, hlen); /* XXX check this call */
- hlen = 0;
- }
- if (hlen != PPP_HDRLEN) {
- /*
- * We need to put some bytes on the front of the packet
- * to make a full-length PPP header.
- * If we can put them in *mp, we do, otherwise we
- * tack another mblk on the front.
- * XXX we really shouldn't need to carry around
- * the address and control at this stage.
- */
- dp = mp->b_rptr + hlen - PPP_HDRLEN;
- if (dp < mp->b_datap->db_base || mp->b_datap->db_ref > 1) {
- np = allocb(PPP_HDRLEN, BPRI_MED);
- if (np == 0)
- goto bad;
- np->b_cont = mp;
- mp->b_rptr += hlen;
- mp = np;
- dp = mp->b_wptr;
- mp->b_wptr += PPP_HDRLEN;
- } else
- mp->b_rptr = dp;
-
- dp[0] = PPP_ALLSTATIONS;
- dp[1] = PPP_UI;
- dp[2] = proto >> 8;
- dp[3] = proto;
- }
-
- /*
- * Now see if we have a compressed packet to decompress,
- * or a CCP packet to take notice of.
- */
- proto = PPP_PROTOCOL(mp->b_rptr);
- if (proto == PPP_CCP) {
- len = msgdsize(mp);
- if (mp->b_wptr < mp->b_rptr + len) {
- PULLUP(mp, len);
- if (mp == 0)
- goto bad;
- }
- ppp_comp_ccp(q, mp, 1);
- } else if (proto == PPP_COMP) {
- if ((cp->flags & CCP_ISUP)
- && (cp->flags & CCP_DECOMP_RUN) && cp->rstate
- && (cp->flags & CCP_ERR) == 0) {
- rv = (*cp->rcomp->decompress)(cp->rstate, mp, &dmp);
- switch (rv) {
- case DECOMP_OK:
- freemsg(mp);
- mp = dmp;
- if (mp == NULL) {
- /* no error, but no packet returned either. */
- continue;
- }
- break;
- case DECOMP_ERROR:
- cp->flags |= CCP_ERROR;
- ++cp->stats.ppp_ierrors;
- putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
- break;
- case DECOMP_FATALERROR:
- cp->flags |= CCP_FATALERROR;
- ++cp->stats.ppp_ierrors;
- putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
- break;
- }
- }
- } else if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
- (*cp->rcomp->incomp)(cp->rstate, mp);
- }
-
- /*
- * Now do VJ decompression.
- */
- proto = PPP_PROTOCOL(mp->b_rptr);
- if (proto == PPP_VJC_COMP || proto == PPP_VJC_UNCOMP) {
- len = msgdsize(mp) - PPP_HDRLEN;
- if ((cp->flags & DECOMP_VJC) == 0 || len <= 0)
- goto bad;
-
- /*
- * Advance past the ppp header.
- * Here we assume that the whole PPP header is in the first mblk.
- */
- np = mp;
- dp = np->b_rptr + PPP_HDRLEN;
- if (dp >= mp->b_wptr) {
- np = np->b_cont;
- dp = np->b_rptr;
- }
-
- /*
- * Make sure we have sufficient contiguous data at this point.
- */
- hlen = (proto == PPP_VJC_COMP)? MAX_VJHDR: MAX_IPHDR;
- if (hlen > len)
- hlen = len;
- if (np->b_wptr < dp + hlen || np->b_datap->db_ref > 1) {
- PULLUP(mp, hlen + PPP_HDRLEN);
- if (mp == 0)
- goto bad;
- np = mp;
- dp = np->b_rptr + PPP_HDRLEN;
- }
-
- if (proto == PPP_VJC_COMP) {
- /*
- * Decompress VJ-compressed packet.
- * First reset compressor if an input error has occurred.
- */
- if (cp->stats.ppp_ierrors != cp->vj_last_ierrors) {
- if (cp->flags & DBGLOG)
- DPRINT1("ppp%d: resetting VJ\n", cp->unit);
- vj_uncompress_err(&cp->vj_comp);
- cp->vj_last_ierrors = cp->stats.ppp_ierrors;
- }
-
- vjlen = vj_uncompress_tcp(dp, np->b_wptr - dp, len,
- &cp->vj_comp, &iphdr, &iphlen);
- if (vjlen < 0) {
- if (cp->flags & DBGLOG)
- DPRINT2("ppp%d: vj_uncomp_tcp failed, pkt len %d\n",
- cp->unit, len);
- ++cp->vj_last_ierrors; /* so we don't reset next time */
- goto bad;
- }
-
- /* drop ppp and vj headers off */
- if (mp != np) {
- freeb(mp);
- mp = np;
- }
- mp->b_rptr = dp + vjlen;
-
- /* allocate a new mblk for the ppp and ip headers */
- if ((np = allocb(iphlen + PPP_HDRLEN + 4, BPRI_MED)) == 0)
- goto bad;
- dp = np->b_rptr; /* prepend mblk with TCP/IP hdr */
- dp[0] = PPP_ALLSTATIONS; /* reconstruct PPP header */
- dp[1] = PPP_UI;
- dp[2] = PPP_IP >> 8;
- dp[3] = PPP_IP;
- bcopy((caddr_t)iphdr, (caddr_t)dp + PPP_HDRLEN, iphlen);
- np->b_wptr = dp + iphlen + PPP_HDRLEN;
- np->b_cont = mp;
-
- /* XXX there seems to be a bug which causes panics in strread
- if we make an mbuf with only the IP header in it :-( */
- if (mp->b_wptr - mp->b_rptr > 4) {
- bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr, 4);
- mp->b_rptr += 4;
- np->b_wptr += 4;
- } else {
- bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr,
- mp->b_wptr - mp->b_rptr);
- np->b_wptr += mp->b_wptr - mp->b_rptr;
- np->b_cont = mp->b_cont;
- freeb(mp);
- }
-
- mp = np;
-
- } else {
- /*
- * "Decompress" a VJ-uncompressed packet.
- */
- cp->vj_last_ierrors = cp->stats.ppp_ierrors;
- if (!vj_uncompress_uncomp(dp, hlen, &cp->vj_comp)) {
- if (cp->flags & DBGLOG)
- DPRINT2("ppp%d: vj_uncomp_uncomp failed, pkt len %d\n",
- cp->unit, len);
- ++cp->vj_last_ierrors; /* don't need to reset next time */
- goto bad;
- }
- mp->b_rptr[3] = PPP_IP; /* fix up the PPP protocol field */
- }
- }
-
- putnext(q, mp);
- continue;
-
- bad:
- if (mp != 0)
- freemsg(mp);
- cp->stats.ppp_ierrors++;
- putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
- }
-
- return 0;
-}
-
-/*
- * Handle a CCP packet being sent or received.
- * Here all the data in the packet is in a single mbuf.
- */
-static void
-ppp_comp_ccp(q, mp, rcvd)
- queue_t *q;
- mblk_t *mp;
- int rcvd;
-{
- int len, clen;
- comp_state_t *cp;
- unsigned char *dp;
-
- len = msgdsize(mp);
- if (len < PPP_HDRLEN + CCP_HDRLEN)
- return;
-
- cp = (comp_state_t *) q->q_ptr;
- dp = mp->b_rptr + PPP_HDRLEN;
- len -= PPP_HDRLEN;
- clen = CCP_LENGTH(dp);
- if (clen > len)
- return;
-
- switch (CCP_CODE(dp)) {
- case CCP_CONFREQ:
- case CCP_TERMREQ:
- case CCP_TERMACK:
- cp->flags &= ~CCP_ISUP;
- break;
-
- case CCP_CONFACK:
- if ((cp->flags & (CCP_ISOPEN | CCP_ISUP)) == CCP_ISOPEN
- && clen >= CCP_HDRLEN + CCP_OPT_MINLEN
- && clen >= CCP_HDRLEN + CCP_OPT_LENGTH(dp + CCP_HDRLEN)) {
- if (!rcvd) {
- if (cp->xstate != NULL
- && (*cp->xcomp->comp_init)
- (cp->xstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
- cp->unit, 0, ((cp->flags & DBGLOG) != 0)))
- cp->flags |= CCP_COMP_RUN;
- } else {
- if (cp->rstate != NULL
- && (*cp->rcomp->decomp_init)
- (cp->rstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
- cp->unit, 0, cp->mru, ((cp->flags & DBGLOG) != 0)))
- cp->flags = (cp->flags & ~CCP_ERR) | CCP_DECOMP_RUN;
- }
- }
- break;
-
- case CCP_RESETACK:
- if (cp->flags & CCP_ISUP) {
- if (!rcvd) {
- if (cp->xstate && (cp->flags & CCP_COMP_RUN))
- (*cp->xcomp->comp_reset)(cp->xstate);
- } else {
- if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
- (*cp->rcomp->decomp_reset)(cp->rstate);
- cp->flags &= ~CCP_ERROR;
- }
- }
- }
- break;
- }
-}
-
-#if 0
-dump_msg(mp)
- mblk_t *mp;
-{
- dblk_t *db;
-
- while (mp != 0) {
- db = mp->b_datap;
- DPRINT2("mp=%x cont=%x ", mp, mp->b_cont);
- DPRINT3("rptr=%x wptr=%x datap=%x\n", mp->b_rptr, mp->b_wptr, db);
- DPRINT2(" base=%x lim=%x", db->db_base, db->db_lim);
- DPRINT2(" ref=%d type=%d\n", db->db_ref, db->db_type);
- mp = mp->b_cont;
- }
-}
-#endif
-
-static int
-msg_byte(mp, i)
- mblk_t *mp;
- unsigned int i;
-{
- while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
- mp = mp->b_cont;
- if (mp == 0)
- return -1;
- return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/modules/ppp_mod.h b/mdk-stage1/ppp/modules/ppp_mod.h
deleted file mode 100644
index f0af00886..000000000
--- a/mdk-stage1/ppp/modules/ppp_mod.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Miscellaneous definitions for PPP STREAMS modules.
- */
-
-/*
- * Macros for allocating and freeing kernel memory.
- */
-#ifdef SVR4 /* SVR4, including Solaris 2 */
-#include <sys/kmem.h>
-#define ALLOC_SLEEP(n) kmem_alloc((n), KM_SLEEP)
-#define ALLOC_NOSLEEP(n) kmem_alloc((n), KM_NOSLEEP)
-#define FREE(p, n) kmem_free((p), (n))
-#endif
-
-#ifdef SUNOS4
-#include <sys/kmem_alloc.h> /* SunOS 4.x */
-#define ALLOC_SLEEP(n) kmem_alloc((n), KMEM_SLEEP)
-#define ALLOC_NOSLEEP(n) kmem_alloc((n), KMEM_NOSLEEP)
-#define FREE(p, n) kmem_free((p), (n))
-#define NOTSUSER() (suser()? 0: EPERM)
-#define bcanputnext(q, band) canputnext((q))
-#endif /* SunOS 4 */
-
-#ifdef __osf__
-#include <sys/malloc.h>
-
-/* caution: this mirrors macros in sys/malloc.h, and uses interfaces
- * which are subject to change.
- * The problems are that:
- * - the official MALLOC macro wants the lhs of the assignment as an argument,
- * and it takes care of the assignment itself (yuck.)
- * - PPP insists on using "FREE" which conflicts with a macro of the same name.
- *
- */
-#ifdef BUCKETINDX /* V2.0 */
-#define ALLOC_SLEEP(n) (void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n) (void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_NOWAIT)
-#else
-#define ALLOC_SLEEP(n) (void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n) (void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_NOWAIT)
-#endif
-
-#define bcanputnext(q, band) canputnext((q))
-
-#ifdef FREE
-#undef FREE
-#endif
-#define FREE(p, n) free((void *)(p), M_DEVBUF)
-
-#define NO_DLPI 1
-
-#ifndef IFT_PPP
-#define IFT_PPP 0x17
-#endif
-
-#include <sys/proc.h>
-#define NOTSUSER() (suser(u.u_procp->p_rcred, &u.u_acflag) ? EPERM : 0)
-
-/* #include "ppp_osf.h" */
-
-#endif /* __osf__ */
-
-#ifdef AIX4
-#define ALLOC_SLEEP(n) xmalloc((n), 0, pinned_heap) /* AIX V4.x */
-#define ALLOC_NOSLEEP(n) xmalloc((n), 0, pinned_heap) /* AIX V4.x */
-#define FREE(p, n) xmfree((p), pinned_heap)
-#define NOTSUSER() (suser()? 0: EPERM)
-#endif /* AIX */
-
-/*
- * Macros for printing debugging stuff.
- */
-#ifdef DEBUG
-#if defined(SVR4) || defined(__osf__)
-#if defined(SNI)
-#include <sys/strlog.h>
-#define STRLOG_ID 4712
-#define DPRINT(f) strlog(STRLOG_ID, 0, 0, SL_TRACE, f)
-#define DPRINT1(f, a1) strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1)
-#define DPRINT2(f, a1, a2) strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3) strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2, a3)
-#else
-#define DPRINT(f) cmn_err(CE_CONT, f)
-#define DPRINT1(f, a1) cmn_err(CE_CONT, f, a1)
-#define DPRINT2(f, a1, a2) cmn_err(CE_CONT, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3) cmn_err(CE_CONT, f, a1, a2, a3)
-#endif /* SNI */
-#else
-#define DPRINT(f) printf(f)
-#define DPRINT1(f, a1) printf(f, a1)
-#define DPRINT2(f, a1, a2) printf(f, a1, a2)
-#define DPRINT3(f, a1, a2, a3) printf(f, a1, a2, a3)
-#endif /* SVR4 or OSF */
-
-#else
-#define DPRINT(f) 0
-#define DPRINT1(f, a1) 0
-#define DPRINT2(f, a1, a2) 0
-#define DPRINT3(f, a1, a2, a3) 0
-#endif /* DEBUG */
-
-#ifndef SVR4
-typedef unsigned char uchar_t;
-typedef unsigned short ushort_t;
-#ifndef __osf__
-typedef int minor_t;
-#endif
-#endif
-
-/*
- * If we don't have multithreading support, define substitutes.
- */
-#ifndef D_MP
-# define qprocson(q)
-# define qprocsoff(q)
-# define put(q, mp) ((*(q)->q_qinfo->qi_putp)((q), (mp)))
-# define canputnext(q) canput((q)->q_next)
-# define qwriter(q, mp, func, scope) (func)((q), (mp))
-#endif
-
-#ifdef D_MP
-/* Use msgpullup if we have other multithreading support. */
-#define PULLUP(mp, len) \
- do { \
- mblk_t *np = msgpullup((mp), (len)); \
- freemsg((mp)); \
- mp = np; \
- } while (0)
-
-#else
-/* Use pullupmsg if we don't have any multithreading support. */
-#define PULLUP(mp, len) \
- do { \
- if (!pullupmsg((mp), (len))) { \
- freemsg((mp)); \
- mp = 0; \
- } \
- } while (0)
-#endif
-
-/*
- * How to declare the open and close procedures for a module.
- */
-#ifdef SVR4
-#define MOD_OPEN_DECL(name) \
-static int name __P((queue_t *, dev_t *, int, int, cred_t *))
-
-#define MOD_CLOSE_DECL(name) \
-static int name __P((queue_t *, int, cred_t *))
-
-#define MOD_OPEN(name) \
-static int name(q, devp, flag, sflag, credp) \
- queue_t *q; \
- dev_t *devp; \
- int flag, sflag; \
- cred_t *credp;
-
-#define MOD_CLOSE(name) \
-static int name(q, flag, credp) \
- queue_t *q; \
- int flag; \
- cred_t *credp;
-
-#define OPEN_ERROR(x) return (x)
-#define DRV_OPEN_OK(dev) return 0
-
-#define NOTSUSER() (drv_priv(credp))
-
-#else /* not SVR4 */
-#define MOD_OPEN_DECL(name) \
-static int name __P((queue_t *, int, int, int))
-
-#define MOD_CLOSE_DECL(name) \
-static int name __P((queue_t *, int))
-
-#define MOD_OPEN(name) \
-static int name(q, dev, flag, sflag) \
- queue_t *q; \
- int dev; \
- int flag, sflag;
-
-#define MOD_CLOSE(name) \
-static int name(q, flag) \
- queue_t *q; \
- int flag;
-
-#define OPEN_ERROR(x) { u.u_error = (x); return OPENFAIL; }
-#define DRV_OPEN_OK(dev) return (dev)
-
-#endif /* SVR4 */
diff --git a/mdk-stage1/ppp/modules/vjcompress.c b/mdk-stage1/ppp/modules/vjcompress.c
deleted file mode 100644
index 809b87231..000000000
--- a/mdk-stage1/ppp/modules/vjcompress.c
+++ /dev/null
@@ -1,587 +0,0 @@
-/*
- * Routines to compress and uncompess tcp packets (for transmission
- * over low speed serial lines.
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- * - Initial distribution.
- *
- * Modified June 1993 by Paul Mackerras, paulus@cs.anu.edu.au,
- * so that the entire packet being decompressed doesn't have
- * to be in contiguous memory (just the compressed header).
- */
-
-/*
- * This version is used under SunOS 4.x, Digital UNIX, AIX 4.x,
- * and SVR4 systems including Solaris 2.
- *
- * $Id$
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-
-#ifdef SVR4
-#ifndef __GNUC__
-#include <sys/byteorder.h> /* for ntohl, etc. */
-#else
-/* make sure we don't get the gnu "fixed" one! */
-#include "/usr/include/sys/byteorder.h"
-#endif
-#endif
-
-#ifdef __osf__
-#include <net/net_globals.h>
-#endif
-#include <netinet/in.h>
-
-#ifdef AIX4
-#define _NETINET_IN_SYSTM_H_
-typedef u_long n_long;
-#else
-#include <netinet/in_systm.h>
-#endif
-
-#include <netinet/ip.h>
-#include <netinet/tcp.h>
-
-#include <net/ppp_defs.h>
-#include <net/vjcompress.h>
-
-#ifndef VJ_NO_STATS
-#define INCR(counter) ++comp->stats.counter
-#else
-#define INCR(counter)
-#endif
-
-#define BCMP(p1, p2, n) bcmp((char *)(p1), (char *)(p2), (int)(n))
-#undef BCOPY
-#define BCOPY(p1, p2, n) bcopy((char *)(p1), (char *)(p2), (int)(n))
-#ifndef KERNEL
-#define ovbcopy bcopy
-#endif
-
-#ifdef __osf__
-#define getip_hl(base) (((base).ip_vhl)&0xf)
-#define getth_off(base) ((((base).th_xoff)&0xf0)>>4)
-
-#else
-#define getip_hl(base) ((base).ip_hl)
-#define getth_off(base) ((base).th_off)
-#endif
-
-void
-vj_compress_init(comp, max_state)
- struct vjcompress *comp;
- int max_state;
-{
- register u_int i;
- register struct cstate *tstate = comp->tstate;
-
- if (max_state == -1)
- max_state = MAX_STATES - 1;
- bzero((char *)comp, sizeof(*comp));
- for (i = max_state; i > 0; --i) {
- tstate[i].cs_id = i;
- tstate[i].cs_next = &tstate[i - 1];
- }
- tstate[0].cs_next = &tstate[max_state];
- tstate[0].cs_id = 0;
- comp->last_cs = &tstate[0];
- comp->last_recv = 255;
- comp->last_xmit = 255;
- comp->flags = VJF_TOSS;
-}
-
-
-/* ENCODE encodes a number that is known to be non-zero. ENCODEZ
- * checks for zero (since zero has to be encoded in the long, 3 byte
- * form).
- */
-#define ENCODE(n) { \
- if ((u_short)(n) >= 256) { \
- *cp++ = 0; \
- cp[1] = (n); \
- cp[0] = (n) >> 8; \
- cp += 2; \
- } else { \
- *cp++ = (n); \
- } \
-}
-#define ENCODEZ(n) { \
- if ((u_short)(n) >= 256 || (u_short)(n) == 0) { \
- *cp++ = 0; \
- cp[1] = (n); \
- cp[0] = (n) >> 8; \
- cp += 2; \
- } else { \
- *cp++ = (n); \
- } \
-}
-
-#define DECODEL(f) { \
- if (*cp == 0) {\
- u_int32_t tmp = ntohl(f) + ((cp[1] << 8) | cp[2]); \
- (f) = htonl(tmp); \
- cp += 3; \
- } else { \
- u_int32_t tmp = ntohl(f) + (u_int32_t)*cp++; \
- (f) = htonl(tmp); \
- } \
-}
-
-#define DECODES(f) { \
- if (*cp == 0) {\
- u_short tmp = ntohs(f) + ((cp[1] << 8) | cp[2]); \
- (f) = htons(tmp); \
- cp += 3; \
- } else { \
- u_short tmp = ntohs(f) + (u_int32_t)*cp++; \
- (f) = htons(tmp); \
- } \
-}
-
-#define DECODEU(f) { \
- if (*cp == 0) {\
- (f) = htons((cp[1] << 8) | cp[2]); \
- cp += 3; \
- } else { \
- (f) = htons((u_int32_t)*cp++); \
- } \
-}
-
-u_int
-vj_compress_tcp(ip, mlen, comp, compress_cid, vjhdrp)
- register struct ip *ip;
- u_int mlen;
- struct vjcompress *comp;
- int compress_cid;
- u_char **vjhdrp;
-{
- register struct cstate *cs = comp->last_cs->cs_next;
- register u_int hlen = getip_hl(*ip);
- register struct tcphdr *oth;
- register struct tcphdr *th;
- register u_int deltaS, deltaA;
- register u_int changes = 0;
- u_char new_seq[16];
- register u_char *cp = new_seq;
-
- /*
- * Bail if this is an IP fragment or if the TCP packet isn't
- * `compressible' (i.e., ACK isn't set or some other control bit is
- * set). (We assume that the caller has already made sure the
- * packet is IP proto TCP).
- */
- if ((ip->ip_off & htons(0x3fff)) || mlen < 40)
- return (TYPE_IP);
-
- th = (struct tcphdr *)&((int *)ip)[hlen];
- if ((th->th_flags & (TH_SYN|TH_FIN|TH_RST|TH_ACK)) != TH_ACK)
- return (TYPE_IP);
- /*
- * Packet is compressible -- we're going to send either a
- * COMPRESSED_TCP or UNCOMPRESSED_TCP packet. Either way we need
- * to locate (or create) the connection state. Special case the
- * most recently used connection since it's most likely to be used
- * again & we don't have to do any reordering if it's used.
- */
- INCR(vjs_packets);
- if (ip->ip_src.s_addr != cs->cs_ip.ip_src.s_addr ||
- ip->ip_dst.s_addr != cs->cs_ip.ip_dst.s_addr ||
- *(int *)th != ((int *)&cs->cs_ip)[getip_hl(cs->cs_ip)]) {
- /*
- * Wasn't the first -- search for it.
- *
- * States are kept in a circularly linked list with
- * last_cs pointing to the end of the list. The
- * list is kept in lru order by moving a state to the
- * head of the list whenever it is referenced. Since
- * the list is short and, empirically, the connection
- * we want is almost always near the front, we locate
- * states via linear search. If we don't find a state
- * for the datagram, the oldest state is (re-)used.
- */
- register struct cstate *lcs;
- register struct cstate *lastcs = comp->last_cs;
-
- do {
- lcs = cs; cs = cs->cs_next;
- INCR(vjs_searches);
- if (ip->ip_src.s_addr == cs->cs_ip.ip_src.s_addr
- && ip->ip_dst.s_addr == cs->cs_ip.ip_dst.s_addr
- && *(int *)th == ((int *)&cs->cs_ip)[getip_hl(cs->cs_ip)])
- goto found;
- } while (cs != lastcs);
-
- /*
- * Didn't find it -- re-use oldest cstate. Send an
- * uncompressed packet that tells the other side what
- * connection number we're using for this conversation.
- * Note that since the state list is circular, the oldest
- * state points to the newest and we only need to set
- * last_cs to update the lru linkage.
- */
- INCR(vjs_misses);
- comp->last_cs = lcs;
- hlen += getth_off(*th);
- hlen <<= 2;
- if (hlen > mlen)
- return (TYPE_IP);
- goto uncompressed;
-
- found:
- /*
- * Found it -- move to the front on the connection list.
- */
- if (cs == lastcs)
- comp->last_cs = lcs;
- else {
- lcs->cs_next = cs->cs_next;
- cs->cs_next = lastcs->cs_next;
- lastcs->cs_next = cs;
- }
- }
-
- /*
- * Make sure that only what we expect to change changed. The first
- * line of the `if' checks the IP protocol version, header length &
- * type of service. The 2nd line checks the "Don't fragment" bit.
- * The 3rd line checks the time-to-live and protocol (the protocol
- * check is unnecessary but costless). The 4th line checks the TCP
- * header length. The 5th line checks IP options, if any. The 6th
- * line checks TCP options, if any. If any of these things are
- * different between the previous & current datagram, we send the
- * current datagram `uncompressed'.
- */
- oth = (struct tcphdr *)&((int *)&cs->cs_ip)[hlen];
- deltaS = hlen;
- hlen += getth_off(*th);
- hlen <<= 2;
- if (hlen > mlen)
- return (TYPE_IP);
-
- if (((u_short *)ip)[0] != ((u_short *)&cs->cs_ip)[0] ||
- ((u_short *)ip)[3] != ((u_short *)&cs->cs_ip)[3] ||
- ((u_short *)ip)[4] != ((u_short *)&cs->cs_ip)[4] ||
- getth_off(*th) != getth_off(*oth) ||
- (deltaS > 5 && BCMP(ip + 1, &cs->cs_ip + 1, (deltaS - 5) << 2)) ||
- (getth_off(*th) > 5 && BCMP(th + 1, oth + 1, (getth_off(*th) - 5) << 2)))
- goto uncompressed;
-
- /*
- * Figure out which of the changing fields changed. The
- * receiver expects changes in the order: urgent, window,
- * ack, seq (the order minimizes the number of temporaries
- * needed in this section of code).
- */
- if (th->th_flags & TH_URG) {
- deltaS = ntohs(th->th_urp);
- ENCODEZ(deltaS);
- changes |= NEW_U;
- } else if (th->th_urp != oth->th_urp)
- /* argh! URG not set but urp changed -- a sensible
- * implementation should never do this but RFC793
- * doesn't prohibit the change so we have to deal
- * with it. */
- goto uncompressed;
-
- if ((deltaS = (u_short)(ntohs(th->th_win) - ntohs(oth->th_win))) > 0) {
- ENCODE(deltaS);
- changes |= NEW_W;
- }
-
- if ((deltaA = ntohl(th->th_ack) - ntohl(oth->th_ack)) > 0) {
- if (deltaA > 0xffff)
- goto uncompressed;
- ENCODE(deltaA);
- changes |= NEW_A;
- }
-
- if ((deltaS = ntohl(th->th_seq) - ntohl(oth->th_seq)) > 0) {
- if (deltaS > 0xffff)
- goto uncompressed;
- ENCODE(deltaS);
- changes |= NEW_S;
- }
-
- switch(changes) {
-
- case 0:
- /*
- * Nothing changed. If this packet contains data and the
- * last one didn't, this is probably a data packet following
- * an ack (normal on an interactive connection) and we send
- * it compressed. Otherwise it's probably a retransmit,
- * retransmitted ack or window probe. Send it uncompressed
- * in case the other side missed the compressed version.
- */
- if (ip->ip_len != cs->cs_ip.ip_len &&
- ntohs(cs->cs_ip.ip_len) == hlen)
- break;
-
- /* (fall through) */
-
- case SPECIAL_I:
- case SPECIAL_D:
- /*
- * actual changes match one of our special case encodings --
- * send packet uncompressed.
- */
- goto uncompressed;
-
- case NEW_S|NEW_A:
- if (deltaS == deltaA && deltaS == ntohs(cs->cs_ip.ip_len) - hlen) {
- /* special case for echoed terminal traffic */
- changes = SPECIAL_I;
- cp = new_seq;
- }
- break;
-
- case NEW_S:
- if (deltaS == ntohs(cs->cs_ip.ip_len) - hlen) {
- /* special case for data xfer */
- changes = SPECIAL_D;
- cp = new_seq;
- }
- break;
- }
-
- deltaS = ntohs(ip->ip_id) - ntohs(cs->cs_ip.ip_id);
- if (deltaS != 1) {
- ENCODEZ(deltaS);
- changes |= NEW_I;
- }
- if (th->th_flags & TH_PUSH)
- changes |= TCP_PUSH_BIT;
- /*
- * Grab the cksum before we overwrite it below. Then update our
- * state with this packet's header.
- */
- deltaA = ntohs(th->th_sum);
- BCOPY(ip, &cs->cs_ip, hlen);
-
- /*
- * We want to use the original packet as our compressed packet.
- * (cp - new_seq) is the number of bytes we need for compressed
- * sequence numbers. In addition we need one byte for the change
- * mask, one for the connection id and two for the tcp checksum.
- * So, (cp - new_seq) + 4 bytes of header are needed. hlen is how
- * many bytes of the original packet to toss so subtract the two to
- * get the new packet size.
- */
- deltaS = cp - new_seq;
- cp = (u_char *)ip;
- if (compress_cid == 0 || comp->last_xmit != cs->cs_id) {
- comp->last_xmit = cs->cs_id;
- hlen -= deltaS + 4;
- *vjhdrp = (cp += hlen);
- *cp++ = changes | NEW_C;
- *cp++ = cs->cs_id;
- } else {
- hlen -= deltaS + 3;
- *vjhdrp = (cp += hlen);
- *cp++ = changes;
- }
- *cp++ = deltaA >> 8;
- *cp++ = deltaA;
- BCOPY(new_seq, cp, deltaS);
- INCR(vjs_compressed);
- return (TYPE_COMPRESSED_TCP);
-
- /*
- * Update connection state cs & send uncompressed packet (that is,
- * a regular ip/tcp packet but with the 'conversation id' we hope
- * to use on future compressed packets in the protocol field).
- */
- uncompressed:
- BCOPY(ip, &cs->cs_ip, hlen);
- ip->ip_p = cs->cs_id;
- comp->last_xmit = cs->cs_id;
- return (TYPE_UNCOMPRESSED_TCP);
-}
-
-/*
- * Called when we may have missed a packet.
- */
-void
-vj_uncompress_err(comp)
- struct vjcompress *comp;
-{
- comp->flags |= VJF_TOSS;
- INCR(vjs_errorin);
-}
-
-/*
- * "Uncompress" a packet of type TYPE_UNCOMPRESSED_TCP.
- */
-int
-vj_uncompress_uncomp(buf, buflen, comp)
- u_char *buf;
- int buflen;
- struct vjcompress *comp;
-{
- register u_int hlen;
- register struct cstate *cs;
- register struct ip *ip;
-
- ip = (struct ip *) buf;
- hlen = getip_hl(*ip) << 2;
- if (ip->ip_p >= MAX_STATES
- || hlen + sizeof(struct tcphdr) > buflen
- || (hlen += getth_off(*((struct tcphdr *)&((char *)ip)[hlen])) << 2)
- > buflen
- || hlen > MAX_HDR) {
- comp->flags |= VJF_TOSS;
- INCR(vjs_errorin);
- return (0);
- }
- cs = &comp->rstate[comp->last_recv = ip->ip_p];
- comp->flags &=~ VJF_TOSS;
- ip->ip_p = IPPROTO_TCP;
- BCOPY(ip, &cs->cs_ip, hlen);
- cs->cs_hlen = hlen;
- INCR(vjs_uncompressedin);
- return (1);
-}
-
-/*
- * Uncompress a packet of type TYPE_COMPRESSED_TCP.
- * The packet starts at buf and is of total length total_len.
- * The first buflen bytes are at buf; this must include the entire
- * compressed TCP/IP header. This procedure returns the length
- * of the VJ header, with a pointer to the uncompressed IP header
- * in *hdrp and its length in *hlenp.
- */
-int
-vj_uncompress_tcp(buf, buflen, total_len, comp, hdrp, hlenp)
- u_char *buf;
- int buflen, total_len;
- struct vjcompress *comp;
- u_char **hdrp;
- u_int *hlenp;
-{
- register u_char *cp;
- register u_int hlen, changes;
- register struct tcphdr *th;
- register struct cstate *cs;
- register u_short *bp;
- register u_int vjlen;
- register u_int32_t tmp;
-
- INCR(vjs_compressedin);
- cp = buf;
- changes = *cp++;
- if (changes & NEW_C) {
- /* Make sure the state index is in range, then grab the state.
- * If we have a good state index, clear the 'discard' flag. */
- if (*cp >= MAX_STATES)
- goto bad;
-
- comp->flags &=~ VJF_TOSS;
- comp->last_recv = *cp++;
- } else {
- /* this packet has an implicit state index. If we've
- * had a line error since the last time we got an
- * explicit state index, we have to toss the packet. */
- if (comp->flags & VJF_TOSS) {
- INCR(vjs_tossed);
- return (-1);
- }
- }
- cs = &comp->rstate[comp->last_recv];
- hlen = getip_hl(cs->cs_ip) << 2;
- th = (struct tcphdr *)&((u_char *)&cs->cs_ip)[hlen];
- th->th_sum = htons((*cp << 8) | cp[1]);
- cp += 2;
- if (changes & TCP_PUSH_BIT)
- th->th_flags |= TH_PUSH;
- else
- th->th_flags &=~ TH_PUSH;
-
- switch (changes & SPECIALS_MASK) {
- case SPECIAL_I:
- {
- register u_int32_t i = ntohs(cs->cs_ip.ip_len) - cs->cs_hlen;
- /* some compilers can't nest inline assembler.. */
- tmp = ntohl(th->th_ack) + i;
- th->th_ack = htonl(tmp);
- tmp = ntohl(th->th_seq) + i;
- th->th_seq = htonl(tmp);
- }
- break;
-
- case SPECIAL_D:
- /* some compilers can't nest inline assembler.. */
- tmp = ntohl(th->th_seq) + ntohs(cs->cs_ip.ip_len) - cs->cs_hlen;
- th->th_seq = htonl(tmp);
- break;
-
- default:
- if (changes & NEW_U) {
- th->th_flags |= TH_URG;
- DECODEU(th->th_urp);
- } else
- th->th_flags &=~ TH_URG;
- if (changes & NEW_W)
- DECODES(th->th_win);
- if (changes & NEW_A)
- DECODEL(th->th_ack);
- if (changes & NEW_S)
- DECODEL(th->th_seq);
- break;
- }
- if (changes & NEW_I) {
- DECODES(cs->cs_ip.ip_id);
- } else {
- cs->cs_ip.ip_id = ntohs(cs->cs_ip.ip_id) + 1;
- cs->cs_ip.ip_id = htons(cs->cs_ip.ip_id);
- }
-
- /*
- * At this point, cp points to the first byte of data in the
- * packet. Fill in the IP total length and update the IP
- * header checksum.
- */
- vjlen = cp - buf;
- buflen -= vjlen;
- if (buflen < 0)
- /* we must have dropped some characters (crc should detect
- * this but the old slip framing won't) */
- goto bad;
-
- total_len += cs->cs_hlen - vjlen;
- cs->cs_ip.ip_len = htons(total_len);
-
- /* recompute the ip header checksum */
- bp = (u_short *) &cs->cs_ip;
- cs->cs_ip.ip_sum = 0;
- for (changes = 0; hlen > 0; hlen -= 2)
- changes += *bp++;
- changes = (changes & 0xffff) + (changes >> 16);
- changes = (changes & 0xffff) + (changes >> 16);
- cs->cs_ip.ip_sum = ~ changes;
-
- *hdrp = (u_char *) &cs->cs_ip;
- *hlenp = cs->cs_hlen;
- return vjlen;
-
- bad:
- comp->flags |= VJF_TOSS;
- INCR(vjs_errorin);
- return (-1);
-}
diff --git a/mdk-stage1/ppp/pppd/.cvsignore b/mdk-stage1/ppp/pppd/.cvsignore
deleted file mode 100644
index 476ef2253..000000000
--- a/mdk-stage1/ppp/pppd/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-pppd
-pppd-DIET
diff --git a/mdk-stage1/ppp/pppd/Makefile b/mdk-stage1/ppp/pppd/Makefile
deleted file mode 100644
index ad2bdae90..000000000
--- a/mdk-stage1/ppp/pppd/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-TARGETS = pppd
-
-ifeq (DIETLIBC, $(L))
-TARGETS += pppd-DIET
-endif
-
-BINTARGET = ../pppd-bin
-
-
-all: $(TARGETS)
-
-clean:
- rm -f *.o *.a $(BINTARGET) pppd pppd-DIET
-
-FLAGS = -Wall -Werror -Os -fomit-frame-pointer -DDO_BSD_COMPRESS=0 -D_linux_=1 -DHAVE_MMAP -DNO_DRAND48
-
-INCS = -I../include -I.
-
-
-OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o tdb.o tty.o
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-
-pppd: $(OBJS)
- gcc -static -o $@ $^ -lcrypt
- $(STRIPCMD) $@
- cp -f $@ $(BINTARGET)
-
-pppd-DIET: $(OBJS-DIET)
- gcc $(DIETLIBC_LDFLAGS_STAGE1) -o $@ $^ $(DIETLIBC_LIBC)
- $(STRIPCMD) $@
- cp -f $@ $(BINTARGET)
-
-$(OBJS): %.o: %.c
- gcc $(FLAGS) $(INCS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
- gcc $(FLAGS) $(INCS) $(DIETLIBC_INCLUDES) -c $< -o $@
-
diff --git a/mdk-stage1/ppp/pppd/Makefile.linux b/mdk-stage1/ppp/pppd/Makefile.linux
deleted file mode 100644
index 47d6ba01e..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.linux
+++ /dev/null
@@ -1,129 +0,0 @@
-#
-# pppd makefile for Linux
-# $Id$
-#
-
-# Default installation locations
-BINDIR = $(DESTDIR)/usr/sbin
-MANDIR = $(DESTDIR)/usr/man
-
-PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
- ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
- demand.c utils.c multilink.c tdb.c tty.c
-HEADERS = callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
- ipxcp.h cbcp.h tdb.h
-MANPAGES = pppd.8
-PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
- auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
- tdb.o tty.o
-
-all: pppd
-
-#
-# include dependancies if present and backup if as a header file
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-CC = gcc
-#
-COPTS = -Wall $(RPM_OPT_FLAGS)
-LIBS = -lutil
-
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-LIBS += -lcrypt
-endif
-
-# Uncomment the next 2 lines to include support for Microsoft's
-# MS-CHAP authentication protocol.
-CHAPMS=y
-USE_CRYPT=y
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-HAVE_CRYPT_H=y
-endif
-
-# Uncomment the next line to include support for PPP packet filtering.
-# This requires that the libpcap library and headers be installed
-# and that the kernel driver support PPP packet filtering, which it
-# doesn't yet.
-#FILTER=y
-
-HAS_SHADOW=y
-USE_PAM=y
-#HAVE_INET6=y
-
-PLUGIN=y
-
-INCLUDE_DIRS= -I../include
-
-COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
-
-CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-ifdef CHAPMS
-CFLAGS += -DCHAPMS=1
-ifndef USE_CRYPT
-LIBS := -ldes $(LIBS)
-else
-CFLAGS += -DUSE_CRYPT=1
-ifneq ($(wildcard /usr/include/crypt.h),)
-CFLAGS += -DHAVE_CRYPT_H=1
-endif
-endif
-PPPDOBJS += md4.o chap_ms.o
-ifdef MSLANMAN
-CFLAGS += -DMSLANMAN=1
-endif
-endif
-
-ifdef HAS_SHADOW
-CFLAGS += -DHAS_SHADOW
-#LIBS := -lshadow $(LIBS)
-endif
-
-# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
-ifdef USE_PAM
-CFLAGS += -DUSE_PAM
-LIBS := -lpam -ldl $(LIBS)
-endif
-
-# Lock library binary for Linux is included in 'linux' subdirectory.
-ifdef LOCKLIB
-LIBS := -llock $(LIBS)
-CFLAGS += -DLOCKLIB=1
-endif
-
-ifdef PLUGIN
-CFLAGS += -DPLUGIN
-LDFLAGS += -Wl,-E
-LIBS += -ldl
-endif
-
-ifdef FILTER
-LIBS += -lpcap
-CFLAGS += -DPPP_FILTER -I/usr/include/pcap
-endif
-
-ifdef HAVE_INET6
- PPPDSRCS += ipv6cp.c eui64.c
- HEADERS += ipv6cp.h eui64.h
- PPPDOBJS += ipv6cp.o eui64.o
- CFLAGS += -DINET6=1
-endif
-
-
-INSTALL= install
-
-install: pppd
- mkdir -p $(BINDIR) $(MANDIR)
- $(INSTALL) -m 555 pppd $(BINDIR)/pppd
- $(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
-
-pppd: $(PPPDOBJS)
- $(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
-
-clean:
- rm -f $(PPPDOBJS) pppd *~ #* core
-
-depend:
- $(CPP) -M $(CFLAGS) $(PPPDSRCS) >.depend
diff --git a/mdk-stage1/ppp/pppd/Makefile.linux.make b/mdk-stage1/ppp/pppd/Makefile.linux.make
deleted file mode 100644
index d98a32562..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.linux.make
+++ /dev/null
@@ -1,131 +0,0 @@
-#
-# pppd makefile for Linux
-# $Id$
-#
-
-# Default installation locations
-BINDIR = /usr/sbin
-MANDIR = /usr/man
-
-PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
- ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
- demand.c utils.c multilink.c tdb.c tty.c
-HEADERS = callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
- ipxcp.h cbcp.h tdb.h
-MANPAGES = pppd.8
-PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
- auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
- tdb.o tty.o
-
-all: pppd
-
-#
-# include dependancies if present and backup if as a header file
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-# CC = gcc
-#
-COPTS = -O2 -pipe -Wall -g
-LIBS =
-
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-LIBS += -lcrypt
-endif
-
-# Uncomment the next 2 lines to include support for Microsoft's
-# MS-CHAP authentication protocol.
-CHAPMS=y
-USE_CRYPT=y
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-HAVE_CRYPT_H=y
-endif
-
-# Uncomment the next line to include support for PPP packet filtering.
-# This requires that the libpcap library and headers be installed
-# and that the kernel driver support PPP packet filtering, which it
-# doesn't yet.
-#FILTER=y
-
-HAS_SHADOW=y
-#USE_PAM=y
-#HAVE_INET6=y
-
-PLUGIN=y
-
-INCLUDE_DIRS= -I../include
-
-COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
-
-CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-ifdef CHAPMS
-CFLAGS += -DCHAPMS=1
-ifndef USE_CRYPT
-LIBS := -ldes $(LIBS)
-else
-CFLAGS += -DUSE_CRYPT=1
-ifneq ($(wildcard /usr/include/crypt.h),)
-CFLAGS += -DHAVE_CRYPT_H=1
-endif
-endif
-PPPDOBJS += md4.o chap_ms.o
-ifdef MSLANMAN
-CFLAGS += -DMSLANMAN=1
-endif
-endif
-
-ifdef HAS_SHADOW
-CFLAGS += -DHAS_SHADOW
-#LIBS := -lshadow $(LIBS)
-endif
-
-# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
-ifdef USE_PAM
-CFLAGS += -DUSE_PAM
-LIBS := -lpam -ldl $(LIBS)
-endif
-
-# Lock library binary for Linux is included in 'linux' subdirectory.
-ifdef LOCKLIB
-LIBS := -llock $(LIBS)
-CFLAGS += -DLOCKLIB=1
-endif
-
-ifdef PLUGIN
-CFLAGS += -DPLUGIN
-LDFLAGS += -Wl,-E
-LIBS += -ldl
-endif
-
-ifdef FILTER
-LIBS += -lpcap
-CFLAGS += -DPPP_FILTER -I/usr/include/pcap
-endif
-
-ifdef HAVE_INET6
- PPPDSRCS += ipv6cp.c eui64.c
- HEADERS += ipv6cp.h eui64.h
- PPPDOBJS += ipv6cp.o eui64.o
- CFLAGS += -DINET6=1
-endif
-
-
-INSTALL= install -o root
-
-install: pppd
- mkdir -p $(BINDIR) $(MANDIR)
- $(INSTALL) -s -c -m 555 pppd $(BINDIR)/pppd
- if chgrp pppusers $(BINDIR)/pppd 2>/dev/null; then \
- chmod o-rx,u+s $(BINDIR)/pppd; fi
- $(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
-
-pppd: $(PPPDOBJS)
- $(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
-
-clean:
- rm -f $(PPPDOBJS) pppd *~ #* core
-
-depend:
- $(CPP) -M $(CFLAGS) $(PPPDSRCS) >.depend
diff --git a/mdk-stage1/ppp/pppd/Makefile.linux.makeopt b/mdk-stage1/ppp/pppd/Makefile.linux.makeopt
deleted file mode 100644
index 3094c941c..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.linux.makeopt
+++ /dev/null
@@ -1,129 +0,0 @@
-#
-# pppd makefile for Linux
-# $Id$
-#
-
-# Default installation locations
-BINDIR = $(DESTDIR)/usr/sbin
-MANDIR = $(DESTDIR)/usr/man
-
-PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
- ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
- demand.c utils.c multilink.c tdb.c tty.c
-HEADERS = callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
- ipxcp.h cbcp.h tdb.h
-MANPAGES = pppd.8
-PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
- auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
- tdb.o tty.o
-
-all: pppd
-
-#
-# include dependancies if present and backup if as a header file
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-CC = gcc
-#
-COPTS = -O2 -pipe -Wall -g
-LIBS = -lutil
-
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-LIBS += -lcrypt
-endif
-
-# Uncomment the next 2 lines to include support for Microsoft's
-# MS-CHAP authentication protocol.
-CHAPMS=y
-USE_CRYPT=y
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-HAVE_CRYPT_H=y
-endif
-
-# Uncomment the next line to include support for PPP packet filtering.
-# This requires that the libpcap library and headers be installed
-# and that the kernel driver support PPP packet filtering, which it
-# doesn't yet.
-#FILTER=y
-
-HAS_SHADOW=y
-USE_PAM=y
-#HAVE_INET6=y
-
-PLUGIN=y
-
-INCLUDE_DIRS= -I../include
-
-COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
-
-CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-ifdef CHAPMS
-CFLAGS += -DCHAPMS=1
-ifndef USE_CRYPT
-LIBS := -ldes $(LIBS)
-else
-CFLAGS += -DUSE_CRYPT=1
-ifneq ($(wildcard /usr/include/crypt.h),)
-CFLAGS += -DHAVE_CRYPT_H=1
-endif
-endif
-PPPDOBJS += md4.o chap_ms.o
-ifdef MSLANMAN
-CFLAGS += -DMSLANMAN=1
-endif
-endif
-
-ifdef HAS_SHADOW
-CFLAGS += -DHAS_SHADOW
-#LIBS := -lshadow $(LIBS)
-endif
-
-# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
-ifdef USE_PAM
-CFLAGS += -DUSE_PAM
-LIBS := -lpam -ldl $(LIBS)
-endif
-
-# Lock library binary for Linux is included in 'linux' subdirectory.
-ifdef LOCKLIB
-LIBS := -llock $(LIBS)
-CFLAGS += -DLOCKLIB=1
-endif
-
-ifdef PLUGIN
-CFLAGS += -DPLUGIN
-LDFLAGS += -Wl,-E
-LIBS += -ldl
-endif
-
-ifdef FILTER
-LIBS += -lpcap
-CFLAGS += -DPPP_FILTER -I/usr/include/pcap
-endif
-
-ifdef HAVE_INET6
- PPPDSRCS += ipv6cp.c eui64.c
- HEADERS += ipv6cp.h eui64.h
- PPPDOBJS += ipv6cp.o eui64.o
- CFLAGS += -DINET6=1
-endif
-
-
-INSTALL= install
-
-install: pppd
- mkdir -p $(BINDIR) $(MANDIR)
- $(INSTALL) -m 555 pppd $(BINDIR)/pppd
- $(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
-
-pppd: $(PPPDOBJS)
- $(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
-
-clean:
- rm -f $(PPPDOBJS) pppd *~ #* core
-
-depend:
- $(CPP) -M $(CFLAGS) $(PPPDSRCS) >.depend
diff --git a/mdk-stage1/ppp/pppd/Makefile.sol2 b/mdk-stage1/ppp/pppd/Makefile.sol2
deleted file mode 100644
index dfdcddd97..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.sol2
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# Makefile for pppd under Solaris 2.
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-COPTS += -xO2 -xspace -W0,-Lt
-CFLAGS = -I../include -DSVR4 -DSOL2 $(COPTS)
-LIBS = -lsocket -lnsl
-
-OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o tty.o \
- ccp.o auth.o options.o demand.o utils.o sys-solaris.o tdb.o
-
-#
-# uncomment the following to enable plugins
-#
-CFLAGS += -DPLUGIN
-LIBS += -ldl
-
-#
-# Solaris 8 and above accomodates /var/run, so uncomment the
-# following to place pppd process IDs on that location
-#
-#CFLAGS += -D_PATH_VARRUN='"/var/run/"'
-
-#
-# uncomment the following to enable IPv6
-#
-# Solaris 8 and on includes support for IPv6
-#
-#CFLAGS += -DINET6
-#OBJS += ipv6cp.o eui64.o
-
-#
-# Make targets
-#
-all: pppd
-
-pppd: $(OBJS)
- $(CC) -o pppd $(OBJS) $(LIBS)
-
-install:
- $(INSTALL) -f $(BINDIR) -m 4755 -u root pppd
- $(INSTALL) -f $(MANDIR)/man8 -m 444 pppd.8
-
-clean:
- rm -f $(OBJS) pppd *~ core y.tab.c y.tab.h
diff --git a/mdk-stage1/ppp/pppd/Makefile.sunos4 b/mdk-stage1/ppp/pppd/Makefile.sunos4
deleted file mode 100644
index 694ac341f..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.sunos4
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for pppd under SunOS 4.
-# $Id$
-#
-
-include ../sunos4/Makedefs
-
-LIBS =
-
-CFLAGS = $(COPTS) -I../include -DSUNOS4 -DGIDSET_TYPE=int \
- -DLOCK_DIR=\"/usr/spool/locks\"
-
-all: pppd
-
-OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
- auth.o options.o demand.o utils.o sys-sunos4.o tty.o
-
-pppd: $(OBJS)
- $(CC) -o pppd $(OBJS) $(LIBS)
-
-install:
- $(INSTALL) -c -m 4555 pppd $(BINDIR)/pppd
- $(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8/pppd.8
-
-clean:
- rm -f $(OBJS) pppd *~ core
diff --git a/mdk-stage1/ppp/pppd/auth.c b/mdk-stage1/ppp/pppd/auth.c
deleted file mode 100644
index 5f95a2982..000000000
--- a/mdk-stage1/ppp/pppd/auth.c
+++ /dev/null
@@ -1,1939 +0,0 @@
-/*
- * auth.c - PPP authentication and phase control.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University. The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <pwd.h>
-#include <grp.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <utmp.h>
-#include <fcntl.h>
-#if defined(_PATH_LASTLOG) && defined(_linux_)
-#include <lastlog.h>
-#endif
-
-#include <netdb.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#ifdef USE_PAM
-#include <security/pam_appl.h>
-#endif
-
-#ifdef HAS_SHADOW
-#include <shadow.h>
-#ifndef PW_PPP
-#define PW_PPP PW_LOGIN
-#endif
-#endif
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "ipcp.h"
-#include "upap.h"
-#include "chap.h"
-#ifdef CBCP_SUPPORT
-#include "cbcp.h"
-#endif
-#include "pathnames.h"
-
-#include <time.h>
-
-static const char rcsid[] = RCSID;
-
-/* Bits in scan_authfile return value */
-#define NONWILD_SERVER 1
-#define NONWILD_CLIENT 2
-
-#define ISWILD(word) (word[0] == '*' && word[1] == 0)
-
-/* The name by which the peer authenticated itself to us. */
-char peer_authname[MAXNAMELEN];
-
-/* Records which authentication operations haven't completed yet. */
-static int auth_pending[NUM_PPP];
-
-/* Set if we have successfully called plogin() */
-static int logged_in;
-
-/* List of addresses which the peer may use. */
-static struct permitted_ip *addresses[NUM_PPP];
-
-/* Wordlist giving addresses which the peer may use
- without authenticating itself. */
-static struct wordlist *noauth_addrs;
-
-/* Extra options to apply, from the secrets file entry for the peer. */
-static struct wordlist *extra_options;
-
-/* Number of network protocols which we have opened. */
-static int num_np_open;
-
-/* Number of network protocols which have come up. */
-static int num_np_up;
-
-/* Set if we got the contents of passwd[] from the pap-secrets file. */
-static int passwd_from_file;
-
-/* Set if we require authentication only because we have a default route. */
-static bool default_auth;
-
-/* Hook to enable a plugin to control the idle time limit */
-int (*idle_time_hook) __P((struct ppp_idle *)) = NULL;
-
-/* Hook for a plugin to say whether we can possibly authenticate any peer */
-int (*pap_check_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to check the PAP user and password */
-int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
- struct wordlist **paddrs,
- struct wordlist **popts)) = NULL;
-
-/* Hook for a plugin to know about the PAP user logout */
-void (*pap_logout_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to get the PAP password for authenticating us */
-int (*pap_passwd_hook) __P((char *user, char *passwd)) = NULL;
-
-/*
- * This is used to ensure that we don't start an auth-up/down
- * script while one is already running.
- */
-enum script_state {
- s_down,
- s_up
-};
-
-static enum script_state auth_state = s_down;
-static enum script_state auth_script_state = s_down;
-static pid_t auth_script_pid = 0;
-
-static int used_login; /* peer authenticated against login database */
-
-/*
- * Option variables.
- */
-bool uselogin = 0; /* Use /etc/passwd for checking PAP */
-bool cryptpap = 0; /* Passwords in pap-secrets are encrypted */
-bool refuse_pap = 0; /* Don't wanna auth. ourselves with PAP */
-bool refuse_chap = 0; /* Don't wanna auth. ourselves with CHAP */
-bool usehostname = 0; /* Use hostname for our_name */
-bool auth_required = 0; /* Always require authentication from peer */
-bool allow_any_ip = 0; /* Allow peer to use any IP address */
-bool explicit_remote = 0; /* User specified explicit remote name */
-char remote_name[MAXNAMELEN]; /* Peer's name for authentication */
-
-static char *uafname; /* name of most recent +ua file */
-
-/* Bits in auth_pending[] */
-#define PAP_WITHPEER 1
-#define PAP_PEER 2
-#define CHAP_WITHPEER 4
-#define CHAP_PEER 8
-
-extern char *crypt __P((const char *, const char *));
-
-/* Prototypes for procedures local to this file. */
-
-static void network_phase __P((int));
-static void check_idle __P((void *));
-static void connect_time_expired __P((void *));
-static int plogin __P((char *, char *, char **));
-static void plogout __P((void));
-static int null_login __P((int));
-static int get_pap_passwd __P((char *));
-static int have_pap_secret __P((int *));
-static int have_chap_secret __P((char *, char *, int, int *));
-static int ip_addr_check __P((u_int32_t, struct permitted_ip *));
-static int scan_authfile __P((FILE *, char *, char *, char *,
- struct wordlist **, struct wordlist **,
- char *));
-static void free_wordlist __P((struct wordlist *));
-static void auth_script __P((char *));
-static void auth_script_done __P((void *));
-static void set_allowed_addrs __P((int, struct wordlist *, struct wordlist *));
-static int some_ip_ok __P((struct wordlist *));
-static int setupapfile __P((char **));
-static int privgroup __P((char **));
-static int set_noauth_addr __P((char **));
-static void check_access __P((FILE *, char *));
-static int wordlist_count __P((struct wordlist *));
-
-/*
- * Authentication-related options.
- */
-option_t auth_options[] = {
- { "auth", o_bool, &auth_required,
- "Require authentication from peer", OPT_PRIO | 1 },
- { "noauth", o_bool, &auth_required,
- "Don't require peer to authenticate", OPT_PRIOSUB | OPT_PRIV,
- &allow_any_ip },
- { "require-pap", o_bool, &lcp_wantoptions[0].neg_upap,
- "Require PAP authentication from peer",
- OPT_PRIOSUB | 1, &auth_required },
- { "+pap", o_bool, &lcp_wantoptions[0].neg_upap,
- "Require PAP authentication from peer",
- OPT_ALIAS | OPT_PRIOSUB | 1, &auth_required },
- { "require-chap", o_bool, &lcp_wantoptions[0].neg_chap,
- "Require CHAP authentication from peer",
- OPT_PRIOSUB | 1, &auth_required },
- { "+chap", o_bool, &lcp_wantoptions[0].neg_chap,
- "Require CHAP authentication from peer",
- OPT_ALIAS | OPT_PRIOSUB | 1, &auth_required },
-
- { "refuse-pap", o_bool, &refuse_pap,
- "Don't agree to auth to peer with PAP", 1 },
- { "-pap", o_bool, &refuse_pap,
- "Don't allow PAP authentication with peer", OPT_ALIAS | 1 },
-
- { "refuse-chap", o_bool, &refuse_chap,
- "Don't agree to auth to peer with CHAP", 1 },
- { "-chap", o_bool, &refuse_chap,
- "Don't allow CHAP authentication with peer", OPT_ALIAS | 1 },
-
- { "name", o_string, our_name,
- "Set local name for authentication",
- OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXNAMELEN },
-
- { "+ua", o_special, (void *)setupapfile,
- "Get PAP user and password from file",
- OPT_PRIO | OPT_A2STRVAL, &uafname },
-
- { "user", o_string, user,
- "Set name for auth with peer", OPT_PRIO | OPT_STATIC, NULL, MAXNAMELEN },
-
- { "password", o_string, passwd,
- "Password for authenticating us to the peer",
- OPT_PRIO | OPT_STATIC | OPT_HIDE, NULL, MAXSECRETLEN },
-
- { "usehostname", o_bool, &usehostname,
- "Must use hostname for authentication", 1 },
-
- { "remotename", o_string, remote_name,
- "Set remote name for authentication", OPT_PRIO | OPT_STATIC,
- &explicit_remote, MAXNAMELEN },
-
- { "login", o_bool, &uselogin,
- "Use system password database for PAP", 1 },
-
- { "papcrypt", o_bool, &cryptpap,
- "PAP passwords are encrypted", 1 },
-
- { "privgroup", o_special, (void *)privgroup,
- "Allow group members to use privileged options", OPT_PRIV | OPT_A2LIST },
-
- { "allow-ip", o_special, (void *)set_noauth_addr,
- "Set IP address(es) which can be used without authentication",
- OPT_PRIV | OPT_A2LIST },
-
- { NULL }
-};
-
-/*
- * setupapfile - specifies UPAP info for authenticating with peer.
- */
-static int
-setupapfile(argv)
- char **argv;
-{
- FILE *ufile;
- int l;
- char u[MAXNAMELEN], p[MAXSECRETLEN];
- char *fname;
-
- lcp_allowoptions[0].neg_upap = 1;
-
- /* open user info file */
- fname = strdup(*argv);
- if (fname == NULL)
- novm("+ua file name");
- seteuid(getuid());
- ufile = fopen(fname, "r");
- seteuid(0);
- if (ufile == NULL) {
- option_error("unable to open user login data file %s", fname);
- return 0;
- }
- check_access(ufile, fname);
- uafname = fname;
-
- /* get username */
- if (fgets(u, MAXNAMELEN - 1, ufile) == NULL
- || fgets(p, MAXSECRETLEN - 1, ufile) == NULL){
- option_error("unable to read user login data file %s", fname);
- return 0;
- }
- fclose(ufile);
-
- /* get rid of newlines */
- l = strlen(u);
- if (l > 0 && u[l-1] == '\n')
- u[l-1] = 0;
- l = strlen(p);
- if (l > 0 && p[l-1] == '\n')
- p[l-1] = 0;
-
- if (override_value("user", option_priority, fname))
- strlcpy(user, u, sizeof(user));
- if (override_value("passwd", option_priority, fname))
- strlcpy(passwd, p, sizeof(passwd));
-
- return (1);
-}
-
-
-/*
- * privgroup - allow members of the group to have privileged access.
- */
-static int
-privgroup(argv)
- char **argv;
-{
- struct group *g;
- int i;
-
- g = getgrnam(*argv);
- if (g == 0) {
- option_error("group %s is unknown", *argv);
- return 0;
- }
- for (i = 0; i < ngroups; ++i) {
- if (groups[i] == g->gr_gid) {
- privileged = 1;
- break;
- }
- }
- return 1;
-}
-
-
-/*
- * set_noauth_addr - set address(es) that can be used without authentication.
- * Equivalent to specifying an entry like `"" * "" addr' in pap-secrets.
- */
-static int
-set_noauth_addr(argv)
- char **argv;
-{
- char *addr = *argv;
- int l = strlen(addr) + 1;
- struct wordlist *wp;
-
- wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l);
- if (wp == NULL)
- novm("allow-ip argument");
- wp->word = (char *) (wp + 1);
- wp->next = noauth_addrs;
- BCOPY(addr, wp->word, l);
- noauth_addrs = wp;
- return 1;
-}
-
-
-/*
- * An Open on LCP has requested a change from Dead to Establish phase.
- * Do what's necessary to bring the physical layer up.
- */
-void
-link_required(unit)
- int unit;
-{
-}
-
-/*
- * LCP has terminated the link; go to the Dead phase and take the
- * physical layer down.
- */
-void
-link_terminated(unit)
- int unit;
-{
- if (phase == PHASE_DEAD)
- return;
- if (pap_logout_hook) {
- pap_logout_hook();
- } else {
- if (logged_in)
- plogout();
- }
- new_phase(PHASE_DEAD);
- notice("Connection terminated.");
-}
-
-/*
- * LCP has gone down; it will either die or try to re-establish.
- */
-void
-link_down(unit)
- int unit;
-{
- int i;
- struct protent *protp;
-
- auth_state = s_down;
- if (auth_script_state == s_up && auth_script_pid == 0) {
- update_link_stats(unit);
- auth_script_state = s_down;
- auth_script(_PATH_AUTHDOWN);
- }
- for (i = 0; (protp = protocols[i]) != NULL; ++i) {
- if (!protp->enabled_flag)
- continue;
- if (protp->protocol != PPP_LCP && protp->lowerdown != NULL)
- (*protp->lowerdown)(unit);
- if (protp->protocol < 0xC000 && protp->close != NULL)
- (*protp->close)(unit, "LCP down");
- }
- num_np_open = 0;
- num_np_up = 0;
- if (phase != PHASE_DEAD)
- new_phase(PHASE_TERMINATE);
-}
-
-/*
- * The link is established.
- * Proceed to the Dead, Authenticate or Network phase as appropriate.
- */
-void
-link_established(unit)
- int unit;
-{
- int auth;
- lcp_options *wo = &lcp_wantoptions[unit];
- lcp_options *go = &lcp_gotoptions[unit];
- lcp_options *ho = &lcp_hisoptions[unit];
- int i;
- struct protent *protp;
-
- /*
- * Tell higher-level protocols that LCP is up.
- */
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (protp->protocol != PPP_LCP && protp->enabled_flag
- && protp->lowerup != NULL)
- (*protp->lowerup)(unit);
-
- if (auth_required && !(go->neg_chap || go->neg_upap)) {
- /*
- * We wanted the peer to authenticate itself, and it refused:
- * if we have some address(es) it can use without auth, fine,
- * otherwise treat it as though it authenticated with PAP using
- * a username * of "" and a password of "". If that's not OK,
- * boot it out.
- */
- if (noauth_addrs != NULL) {
- set_allowed_addrs(unit, NULL, NULL);
- } else if (!wo->neg_upap || uselogin || !null_login(unit)) {
- warn("peer refused to authenticate: terminating link");
- lcp_close(unit, "peer refused to authenticate");
- status = EXIT_PEER_AUTH_FAILED;
- return;
- }
- }
-
- new_phase(PHASE_AUTHENTICATE);
- used_login = 0;
- auth = 0;
- if (go->neg_chap) {
- ChapAuthPeer(unit, our_name, go->chap_mdtype);
- auth |= CHAP_PEER;
- } else if (go->neg_upap) {
- upap_authpeer(unit);
- auth |= PAP_PEER;
- }
- if (ho->neg_chap) {
- ChapAuthWithPeer(unit, user, ho->chap_mdtype);
- auth |= CHAP_WITHPEER;
- } else if (ho->neg_upap) {
- if (passwd[0] == 0) {
- passwd_from_file = 1;
- if (!get_pap_passwd(passwd))
- error("No secret found for PAP login");
- }
- upap_authwithpeer(unit, user, passwd);
- auth |= PAP_WITHPEER;
- }
- auth_pending[unit] = auth;
-
- if (!auth)
- network_phase(unit);
-}
-
-/*
- * Proceed to the network phase.
- */
-static void
-network_phase(unit)
- int unit;
-{
- lcp_options *go = &lcp_gotoptions[unit];
-
- /*
- * If the peer had to authenticate, run the auth-up script now.
- */
- if (go->neg_chap || go->neg_upap) {
- auth_state = s_up;
- if (auth_script_state == s_down && auth_script_pid == 0) {
- auth_script_state = s_up;
- auth_script(_PATH_AUTHUP);
- }
- }
-
-#ifdef CBCP_SUPPORT
- /*
- * If we negotiated callback, do it now.
- */
- if (go->neg_cbcp) {
- new_phase(PHASE_CALLBACK);
- (*cbcp_protent.open)(unit);
- return;
- }
-#endif
-
- /*
- * Process extra options from the secrets file
- */
- if (extra_options) {
- options_from_list(extra_options, 1);
- free_wordlist(extra_options);
- extra_options = 0;
- }
- start_networks();
-}
-
-void
-start_networks()
-{
- int i;
- struct protent *protp;
-
- new_phase(PHASE_NETWORK);
-
-#ifdef HAVE_MULTILINK
- if (multilink) {
- if (mp_join_bundle()) {
- if (updetach && !nodetach)
- detach();
- return;
- }
- }
-#endif /* HAVE_MULTILINK */
-
-#ifdef PPP_FILTER
- if (!demand)
- set_filters(&pass_filter, &active_filter);
-#endif
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (protp->protocol < 0xC000 && protp->enabled_flag
- && protp->open != NULL) {
- (*protp->open)(0);
- if (protp->protocol != PPP_CCP)
- ++num_np_open;
- }
-
- if (num_np_open == 0)
- /* nothing to do */
- lcp_close(0, "No network protocols running");
-}
-
-/*
- * The peer has failed to authenticate himself using `protocol'.
- */
-void
-auth_peer_fail(unit, protocol)
- int unit, protocol;
-{
- /*
- * Authentication failure: take the link down
- */
- lcp_close(unit, "Authentication failed");
- status = EXIT_PEER_AUTH_FAILED;
-}
-
-/*
- * The peer has been successfully authenticated using `protocol'.
- */
-void
-auth_peer_success(unit, protocol, name, namelen)
- int unit, protocol;
- char *name;
- int namelen;
-{
- int bit;
-
- switch (protocol) {
- case PPP_CHAP:
- bit = CHAP_PEER;
- break;
- case PPP_PAP:
- bit = PAP_PEER;
- break;
- default:
- warn("auth_peer_success: unknown protocol %x", protocol);
- return;
- }
-
- /*
- * Save the authenticated name of the peer for later.
- */
- if (namelen > sizeof(peer_authname) - 1)
- namelen = sizeof(peer_authname) - 1;
- BCOPY(name, peer_authname, namelen);
- peer_authname[namelen] = 0;
- script_setenv("PEERNAME", peer_authname, 0);
-
- /*
- * If there is no more authentication still to be done,
- * proceed to the network (or callback) phase.
- */
- if ((auth_pending[unit] &= ~bit) == 0)
- network_phase(unit);
-}
-
-/*
- * We have failed to authenticate ourselves to the peer using `protocol'.
- */
-void
-auth_withpeer_fail(unit, protocol)
- int unit, protocol;
-{
- if (passwd_from_file)
- BZERO(passwd, MAXSECRETLEN);
- /*
- * We've failed to authenticate ourselves to our peer.
- * Some servers keep sending CHAP challenges, but there
- * is no point in persisting without any way to get updated
- * authentication secrets.
- */
- lcp_close(unit, "Failed to authenticate ourselves to peer");
- status = EXIT_AUTH_TOPEER_FAILED;
-}
-
-/*
- * We have successfully authenticated ourselves with the peer using `protocol'.
- */
-void
-auth_withpeer_success(unit, protocol)
- int unit, protocol;
-{
- int bit;
-
- switch (protocol) {
- case PPP_CHAP:
- bit = CHAP_WITHPEER;
- break;
- case PPP_PAP:
- if (passwd_from_file)
- BZERO(passwd, MAXSECRETLEN);
- bit = PAP_WITHPEER;
- break;
- default:
- warn("auth_withpeer_success: unknown protocol %x", protocol);
- bit = 0;
- }
-
- /*
- * If there is no more authentication still being done,
- * proceed to the network (or callback) phase.
- */
- if ((auth_pending[unit] &= ~bit) == 0)
- network_phase(unit);
-}
-
-
-/*
- * np_up - a network protocol has come up.
- */
-void
-np_up(unit, proto)
- int unit, proto;
-{
- int tlim;
-
- if (num_np_up == 0) {
- /*
- * At this point we consider that the link has come up successfully.
- */
- status = EXIT_OK;
- unsuccess = 0;
- new_phase(PHASE_RUNNING);
-
- if (idle_time_hook != 0)
- tlim = (*idle_time_hook)(NULL);
- else
- tlim = idle_time_limit;
- if (tlim > 0)
- TIMEOUT(check_idle, NULL, tlim);
-
- /*
- * Set a timeout to close the connection once the maximum
- * connect time has expired.
- */
- if (maxconnect > 0)
- TIMEOUT(connect_time_expired, 0, maxconnect);
-
- /*
- * Detach now, if the updetach option was given.
- */
- if (updetach && !nodetach)
- detach();
- }
- ++num_np_up;
-}
-
-/*
- * np_down - a network protocol has gone down.
- */
-void
-np_down(unit, proto)
- int unit, proto;
-{
- if (--num_np_up == 0) {
- UNTIMEOUT(check_idle, NULL);
- new_phase(PHASE_NETWORK);
- }
-}
-
-/*
- * np_finished - a network protocol has finished using the link.
- */
-void
-np_finished(unit, proto)
- int unit, proto;
-{
- if (--num_np_open <= 0) {
- /* no further use for the link: shut up shop. */
- lcp_close(0, "No network protocols running");
- }
-}
-
-/*
- * check_idle - check whether the link has been idle for long
- * enough that we can shut it down.
- */
-static void
-check_idle(arg)
- void *arg;
-{
- struct ppp_idle idle;
- time_t itime;
- int tlim;
-
- if (!get_idle_time(0, &idle))
- return;
- if (idle_time_hook != 0) {
- tlim = idle_time_hook(&idle);
- } else {
- itime = MIN(idle.xmit_idle, idle.recv_idle);
- tlim = idle_time_limit - itime;
- }
- if (tlim <= 0) {
- /* link is idle: shut it down. */
- notice("Terminating connection due to lack of activity.");
- lcp_close(0, "Link inactive");
- need_holdoff = 0;
- status = EXIT_IDLE_TIMEOUT;
- } else {
- TIMEOUT(check_idle, NULL, tlim);
- }
-}
-
-/*
- * connect_time_expired - log a message and close the connection.
- */
-static void
-connect_time_expired(arg)
- void *arg;
-{
- info("Connect time expired");
- lcp_close(0, "Connect time expired"); /* Close connection */
- status = EXIT_CONNECT_TIME;
-}
-
-/*
- * auth_check_options - called to check authentication options.
- */
-void
-auth_check_options()
-{
- lcp_options *wo = &lcp_wantoptions[0];
- int can_auth;
- int lacks_ip;
-
- /* Default our_name to hostname, and user to our_name */
- if (our_name[0] == 0 || usehostname)
- strlcpy(our_name, hostname, sizeof(our_name));
- if (user[0] == 0)
- strlcpy(user, our_name, sizeof(user));
-
- /*
- * If we have a default route, require the peer to authenticate
- * unless the noauth option was given or the real user is root.
- */
- if (!auth_required && !allow_any_ip && have_route_to(0) && !privileged) {
- auth_required = 1;
- default_auth = 1;
- }
-
- /* If authentication is required, ask peer for CHAP or PAP. */
- if (auth_required) {
- allow_any_ip = 0;
- if (!wo->neg_chap && !wo->neg_upap) {
- wo->neg_chap = 1;
- wo->neg_upap = 1;
- }
- } else {
- wo->neg_chap = 0;
- wo->neg_upap = 0;
- }
-
- /*
- * Check whether we have appropriate secrets to use
- * to authenticate the peer.
- */
- lacks_ip = 0;
- can_auth = wo->neg_upap && (uselogin || have_pap_secret(&lacks_ip));
- if (!can_auth && wo->neg_chap) {
- can_auth = have_chap_secret((explicit_remote? remote_name: NULL),
- our_name, 1, &lacks_ip);
- }
-
- if (auth_required && !can_auth && noauth_addrs == NULL) {
- if (default_auth) {
- option_error(
-"By default the remote system is required to authenticate itself");
- option_error(
-"(because this system has a default route to the internet)");
- } else if (explicit_remote)
- option_error(
-"The remote system (%s) is required to authenticate itself",
- remote_name);
- else
- option_error(
-"The remote system is required to authenticate itself");
- option_error(
-"but I couldn't find any suitable secret (password) for it to use to do so.");
- if (lacks_ip)
- option_error(
-"(None of the available passwords would let it use an IP address.)");
-
- exit(1);
- }
-}
-
-/*
- * auth_reset - called when LCP is starting negotiations to recheck
- * authentication options, i.e. whether we have appropriate secrets
- * to use for authenticating ourselves and/or the peer.
- */
-void
-auth_reset(unit)
- int unit;
-{
- lcp_options *go = &lcp_gotoptions[unit];
- lcp_options *ao = &lcp_allowoptions[0];
-
- ao->neg_upap = !refuse_pap && (passwd[0] != 0 || get_pap_passwd(NULL));
- ao->neg_chap = !refuse_chap
- && (passwd[0] != 0
- || have_chap_secret(user, (explicit_remote? remote_name: NULL),
- 0, NULL));
-
- if (go->neg_upap && !uselogin && !have_pap_secret(NULL))
- go->neg_upap = 0;
- if (go->neg_chap) {
- if (!have_chap_secret((explicit_remote? remote_name: NULL),
- our_name, 1, NULL))
- go->neg_chap = 0;
- }
-}
-
-
-/*
- * check_passwd - Check the user name and passwd against the PAP secrets
- * file. If requested, also check against the system password database,
- * and login the user if OK.
- *
- * returns:
- * UPAP_AUTHNAK: Authentication failed.
- * UPAP_AUTHACK: Authentication succeeded.
- * In either case, msg points to an appropriate message.
- */
-int
-check_passwd(unit, auser, userlen, apasswd, passwdlen, msg)
- int unit;
- char *auser;
- int userlen;
- char *apasswd;
- int passwdlen;
- char **msg;
-{
- int ret;
- char *filename;
- FILE *f;
- struct wordlist *addrs = NULL, *opts = NULL;
- char passwd[256], user[256];
- char secret[MAXWORDLEN];
- static int attempts = 0;
-
- /*
- * Make copies of apasswd and auser, then null-terminate them.
- * If there are unprintable characters in the password, make
- * them visible.
- */
- slprintf(passwd, sizeof(passwd), "%.*v", passwdlen, apasswd);
- slprintf(user, sizeof(user), "%.*v", userlen, auser);
- *msg = "";
-
- /*
- * Check if a plugin wants to handle this.
- */
- if (pap_auth_hook) {
- ret = (*pap_auth_hook)(user, passwd, msg, &addrs, &opts);
- if (ret >= 0) {
- if (ret)
- set_allowed_addrs(unit, addrs, opts);
- BZERO(passwd, sizeof(passwd));
- if (addrs != 0)
- free_wordlist(addrs);
- return ret? UPAP_AUTHACK: UPAP_AUTHNAK;
- }
- }
-
- /*
- * Open the file of pap secrets and scan for a suitable secret
- * for authenticating this user.
- */
- filename = _PATH_UPAPFILE;
- addrs = opts = NULL;
- ret = UPAP_AUTHNAK;
- f = fopen(filename, "r");
- if (f == NULL) {
- error("Can't open PAP password file %s: %m", filename);
-
- } else {
- check_access(f, filename);
- if (scan_authfile(f, user, our_name, secret, &addrs, &opts, filename) < 0) {
- warn("no PAP secret found for %s", user);
- } else {
- /*
- * If the secret is "@login", it means to check
- * the password against the login database.
- */
- int login_secret = strcmp(secret, "@login") == 0;
- ret = UPAP_AUTHACK;
- if (uselogin || login_secret) {
- /* login option or secret is @login */
- ret = plogin(user, passwd, msg);
- if (ret == UPAP_AUTHNAK)
- warn("PAP login failure for %s", user);
- else
- used_login = 1;
- }
- if (secret[0] != 0 && !login_secret) {
- /* password given in pap-secrets - must match */
- if ((cryptpap || strcmp(passwd, secret) != 0)
- && strcmp(crypt(passwd, secret), secret) != 0) {
- ret = UPAP_AUTHNAK;
- warn("PAP authentication failure for %s", user);
- }
- }
- }
- fclose(f);
- }
-
- if (ret == UPAP_AUTHNAK) {
- if (**msg == 0)
- *msg = "Login incorrect";
- /*
- * XXX can we ever get here more than once??
- * Frustrate passwd stealer programs.
- * Allow 10 tries, but start backing off after 3 (stolen from login).
- * On 10'th, drop the connection.
- */
- if (attempts++ >= 10) {
- warn("%d LOGIN FAILURES ON %s, %s", attempts, devnam, user);
- lcp_close(unit, "login failed");
- }
- if (attempts > 3)
- sleep((u_int) (attempts - 3) * 5);
- if (opts != NULL)
- free_wordlist(opts);
-
- } else {
- attempts = 0; /* Reset count */
- if (**msg == 0)
- *msg = "Login ok";
- set_allowed_addrs(unit, addrs, opts);
- }
-
- if (addrs != NULL)
- free_wordlist(addrs);
- BZERO(passwd, sizeof(passwd));
- BZERO(secret, sizeof(secret));
-
- return ret;
-}
-
-/*
- * This function is needed for PAM.
- */
-
-#ifdef USE_PAM
-/* Static variables used to communicate between the conversation function
- * and the server_login function
- */
-static char *PAM_username;
-static char *PAM_password;
-static int PAM_error = 0;
-static pam_handle_t *pamh = NULL;
-
-/* PAM conversation function
- * Here we assume (for now, at least) that echo on means login name, and
- * echo off means password.
- */
-
-static int PAM_conv (int num_msg, const struct pam_message **msg,
- struct pam_response **resp, void *appdata_ptr)
-{
- int replies = 0;
- struct pam_response *reply = NULL;
-
-#define COPY_STRING(s) (s) ? strdup(s) : NULL
-
- reply = malloc(sizeof(struct pam_response) * num_msg);
- if (!reply) return PAM_CONV_ERR;
-
- for (replies = 0; replies < num_msg; replies++) {
- switch (msg[replies]->msg_style) {
- case PAM_PROMPT_ECHO_ON:
- reply[replies].resp_retcode = PAM_SUCCESS;
- reply[replies].resp = COPY_STRING(PAM_username);
- /* PAM frees resp */
- break;
- case PAM_PROMPT_ECHO_OFF:
- reply[replies].resp_retcode = PAM_SUCCESS;
- reply[replies].resp = COPY_STRING(PAM_password);
- /* PAM frees resp */
- break;
- case PAM_TEXT_INFO:
- /* fall through */
- case PAM_ERROR_MSG:
- /* ignore it, but pam still wants a NULL response... */
- reply[replies].resp_retcode = PAM_SUCCESS;
- reply[replies].resp = NULL;
- break;
- default:
- /* Must be an error of some sort... */
- free (reply);
- PAM_error = 1;
- return PAM_CONV_ERR;
- }
- }
- *resp = reply;
- return PAM_SUCCESS;
-}
-
-static struct pam_conv PAM_conversation = {
- &PAM_conv,
- NULL
-};
-#endif /* USE_PAM */
-
-/*
- * plogin - Check the user name and password against the system
- * password database, and login the user if OK.
- *
- * returns:
- * UPAP_AUTHNAK: Login failed.
- * UPAP_AUTHACK: Login succeeded.
- * In either case, msg points to an appropriate message.
- */
-
-static int
-plogin(user, passwd, msg)
- char *user;
- char *passwd;
- char **msg;
-{
- char *tty;
-
-#ifdef USE_PAM
- int pam_error;
-
- pam_error = pam_start ("ppp", user, &PAM_conversation, &pamh);
- if (pam_error != PAM_SUCCESS) {
- *msg = (char *) pam_strerror (pamh, pam_error);
- reopen_log();
- return UPAP_AUTHNAK;
- }
- /*
- * Define the fields for the credential validation
- */
-
- PAM_username = user;
- PAM_password = passwd;
- PAM_error = 0;
- pam_set_item (pamh, PAM_TTY, devnam); /* this might be useful to some modules */
-
- /*
- * Validate the user
- */
- pam_error = pam_authenticate (pamh, PAM_SILENT);
- if (pam_error == PAM_SUCCESS && !PAM_error) {
- pam_error = pam_acct_mgmt (pamh, PAM_SILENT);
- if (pam_error == PAM_SUCCESS)
- pam_error = pam_open_session (pamh, PAM_SILENT);
- }
-
- *msg = (char *) pam_strerror (pamh, pam_error);
-
- /*
- * Clean up the mess
- */
- reopen_log(); /* apparently the PAM stuff does closelog() */
- PAM_username = NULL;
- PAM_password = NULL;
- if (pam_error != PAM_SUCCESS)
- return UPAP_AUTHNAK;
-#else /* #ifdef USE_PAM */
-
-/*
- * Use the non-PAM methods directly
- */
-
-#ifdef HAS_SHADOW
- struct spwd *spwd;
- struct spwd *getspnam();
-#endif
- struct passwd *pw = getpwnam(user);
-
- endpwent();
- if (pw == NULL)
- return (UPAP_AUTHNAK);
-
-#ifdef HAS_SHADOW
- spwd = getspnam(user);
- endspent();
- if (spwd) {
- /* check the age of the password entry */
- long now = time(NULL) / 86400L;
-
- if ((spwd->sp_expire > 0 && now >= spwd->sp_expire)
- || ((spwd->sp_max >= 0 && spwd->sp_max < 10000)
- && spwd->sp_lstchg >= 0
- && now >= spwd->sp_lstchg + spwd->sp_max)) {
- warn("Password for %s has expired", user);
- return (UPAP_AUTHNAK);
- }
- pw->pw_passwd = spwd->sp_pwdp;
- }
-#endif
-
- /*
- * If no passwd, don't let them login.
- */
- if (pw->pw_passwd == NULL || strlen(pw->pw_passwd) < 2
- || strcmp(crypt(passwd, pw->pw_passwd), pw->pw_passwd) != 0)
- return (UPAP_AUTHNAK);
-
-#endif /* #ifdef USE_PAM */
-
- /*
- * Write a wtmp entry for this user.
- */
-
- tty = devnam;
- if (strncmp(tty, "/dev/", 5) == 0)
- tty += 5;
-// logwtmp(tty, user, remote_name); /* Add wtmp login entry */
-
-#if defined(_PATH_LASTLOG) && !defined(USE_PAM)
- if (pw != (struct passwd *)NULL) {
- struct lastlog ll;
- int fd;
-
- if ((fd = open(_PATH_LASTLOG, O_RDWR, 0)) >= 0) {
- (void)lseek(fd, (off_t)(pw->pw_uid * sizeof(ll)), SEEK_SET);
- memset((void *)&ll, 0, sizeof(ll));
- (void)time(&ll.ll_time);
- (void)strncpy(ll.ll_line, tty, sizeof(ll.ll_line));
- (void)write(fd, (char *)&ll, sizeof(ll));
- (void)close(fd);
- }
- }
-#endif /* _PATH_LASTLOG and not USE_PAM */
-
- info("user %s logged in", user);
- logged_in = 1;
-
- return (UPAP_AUTHACK);
-}
-
-/*
- * plogout - Logout the user.
- */
-static void
-plogout()
-{
-#ifdef USE_PAM
- int pam_error;
-
- if (pamh != NULL) {
- pam_error = pam_close_session (pamh, PAM_SILENT);
- pam_end (pamh, pam_error);
- pamh = NULL;
- }
- /* Apparently the pam stuff does closelog(). */
- reopen_log();
-#else /* ! USE_PAM */
- char *tty;
-
- tty = devnam;
- if (strncmp(tty, "/dev/", 5) == 0)
- tty += 5;
-// logwtmp(tty, "", ""); /* Wipe out utmp logout entry */
-#endif /* ! USE_PAM */
- logged_in = 0;
-}
-
-
-/*
- * null_login - Check if a username of "" and a password of "" are
- * acceptable, and iff so, set the list of acceptable IP addresses
- * and return 1.
- */
-static int
-null_login(unit)
- int unit;
-{
- char *filename;
- FILE *f;
- int i, ret;
- struct wordlist *addrs, *opts;
- char secret[MAXWORDLEN];
-
- /*
- * Open the file of pap secrets and scan for a suitable secret.
- */
- filename = _PATH_UPAPFILE;
- addrs = NULL;
- f = fopen(filename, "r");
- if (f == NULL)
- return 0;
- check_access(f, filename);
-
- i = scan_authfile(f, "", our_name, secret, &addrs, &opts, filename);
- ret = i >= 0 && secret[0] == 0;
- BZERO(secret, sizeof(secret));
-
- if (ret)
- set_allowed_addrs(unit, addrs, opts);
- else if (opts != 0)
- free_wordlist(opts);
- if (addrs != 0)
- free_wordlist(addrs);
-
- fclose(f);
- return ret;
-}
-
-
-/*
- * get_pap_passwd - get a password for authenticating ourselves with
- * our peer using PAP. Returns 1 on success, 0 if no suitable password
- * could be found.
- * Assumes passwd points to MAXSECRETLEN bytes of space (if non-null).
- */
-static int
-get_pap_passwd(passwd)
- char *passwd;
-{
- char *filename;
- FILE *f;
- int ret;
- char secret[MAXWORDLEN];
-
- /*
- * Check whether a plugin wants to supply this.
- */
- if (pap_passwd_hook) {
- ret = (*pap_passwd_hook)(user, passwd);
- if (ret >= 0)
- return ret;
- }
-
- filename = _PATH_UPAPFILE;
- f = fopen(filename, "r");
- if (f == NULL)
- return 0;
- check_access(f, filename);
- ret = scan_authfile(f, user,
- (remote_name[0]? remote_name: NULL),
- secret, NULL, NULL, filename);
- fclose(f);
- if (ret < 0)
- return 0;
- if (passwd != NULL)
- strlcpy(passwd, secret, MAXSECRETLEN);
- BZERO(secret, sizeof(secret));
- return 1;
-}
-
-
-/*
- * have_pap_secret - check whether we have a PAP file with any
- * secrets that we could possibly use for authenticating the peer.
- */
-static int
-have_pap_secret(lacks_ipp)
- int *lacks_ipp;
-{
- FILE *f;
- int ret;
- char *filename;
- struct wordlist *addrs;
-
- /* let the plugin decide, if there is one */
- if (pap_check_hook) {
- ret = (*pap_check_hook)();
- if (ret >= 0)
- return ret;
- }
-
- filename = _PATH_UPAPFILE;
- f = fopen(filename, "r");
- if (f == NULL)
- return 0;
-
- ret = scan_authfile(f, (explicit_remote? remote_name: NULL), our_name,
- NULL, &addrs, NULL, filename);
- fclose(f);
- if (ret >= 0 && !some_ip_ok(addrs)) {
- if (lacks_ipp != 0)
- *lacks_ipp = 1;
- ret = -1;
- }
- if (addrs != 0)
- free_wordlist(addrs);
-
- return ret >= 0;
-}
-
-
-/*
- * have_chap_secret - check whether we have a CHAP file with a
- * secret that we could possibly use for authenticating `client'
- * on `server'. Either can be the null string, meaning we don't
- * know the identity yet.
- */
-static int
-have_chap_secret(client, server, need_ip, lacks_ipp)
- char *client;
- char *server;
- int need_ip;
- int *lacks_ipp;
-{
- FILE *f;
- int ret;
- char *filename;
- struct wordlist *addrs;
-
- filename = _PATH_CHAPFILE;
- f = fopen(filename, "r");
- if (f == NULL)
- return 0;
-
- if (client != NULL && client[0] == 0)
- client = NULL;
- else if (server != NULL && server[0] == 0)
- server = NULL;
-
- ret = scan_authfile(f, client, server, NULL, &addrs, NULL, filename);
- fclose(f);
- if (ret >= 0 && need_ip && !some_ip_ok(addrs)) {
- if (lacks_ipp != 0)
- *lacks_ipp = 1;
- ret = -1;
- }
- if (addrs != 0)
- free_wordlist(addrs);
-
- return ret >= 0;
-}
-
-
-/*
- * get_secret - open the CHAP secret file and return the secret
- * for authenticating the given client on the given server.
- * (We could be either client or server).
- */
-int
-get_secret(unit, client, server, secret, secret_len, am_server)
- int unit;
- char *client;
- char *server;
- char *secret;
- int *secret_len;
- int am_server;
-{
- FILE *f;
- int ret, len;
- char *filename;
- struct wordlist *addrs, *opts;
- char secbuf[MAXWORDLEN];
-
- if (!am_server && passwd[0] != 0) {
- strlcpy(secbuf, passwd, sizeof(secbuf));
- } else {
- filename = _PATH_CHAPFILE;
- addrs = NULL;
- secbuf[0] = 0;
-
- f = fopen(filename, "r");
- if (f == NULL) {
- error("Can't open chap secret file %s: %m", filename);
- return 0;
- }
- check_access(f, filename);
-
- ret = scan_authfile(f, client, server, secbuf, &addrs, &opts, filename);
- fclose(f);
- if (ret < 0)
- return 0;
-
- if (am_server)
- set_allowed_addrs(unit, addrs, opts);
- else if (opts != 0)
- free_wordlist(opts);
- if (addrs != 0)
- free_wordlist(addrs);
- }
-
- len = strlen(secbuf);
- if (len > MAXSECRETLEN) {
- error("Secret for %s on %s is too long", client, server);
- len = MAXSECRETLEN;
- }
- BCOPY(secbuf, secret, len);
- BZERO(secbuf, sizeof(secbuf));
- *secret_len = len;
-
- return 1;
-}
-
-/*
- * set_allowed_addrs() - set the list of allowed addresses.
- * Also looks for `--' indicating options to apply for this peer
- * and leaves the following words in extra_options.
- */
-static void
-set_allowed_addrs(unit, addrs, opts)
- int unit;
- struct wordlist *addrs;
- struct wordlist *opts;
-{
- int n;
- struct wordlist *ap, **plink;
- struct permitted_ip *ip;
- char *ptr_word, *ptr_mask;
- struct hostent *hp;
- u_int32_t a, mask, offset;
- struct ipcp_options *wo = &ipcp_wantoptions[unit];
- u_int32_t suggested_ip = 0;
-
- if (addresses[unit] != NULL)
- free(addresses[unit]);
- addresses[unit] = NULL;
- if (extra_options != NULL)
- free_wordlist(extra_options);
- extra_options = opts;
-
- /*
- * Count the number of IP addresses given.
- */
- n = wordlist_count(addrs) + wordlist_count(noauth_addrs);
- if (n == 0)
- return;
- ip = (struct permitted_ip *) malloc((n + 1) * sizeof(struct permitted_ip));
- if (ip == 0)
- return;
-
- /* temporarily append the noauth_addrs list to addrs */
- for (plink = &addrs; *plink != NULL; plink = &(*plink)->next)
- ;
- *plink = noauth_addrs;
-
- n = 0;
- for (ap = addrs; ap != NULL; ap = ap->next) {
- /* "-" means no addresses authorized, "*" means any address allowed */
- ptr_word = ap->word;
- if (strcmp(ptr_word, "-") == 0)
- break;
- if (strcmp(ptr_word, "*") == 0) {
- ip[n].permit = 1;
- ip[n].base = ip[n].mask = 0;
- ++n;
- break;
- }
-
- ip[n].permit = 1;
- if (*ptr_word == '!') {
- ip[n].permit = 0;
- ++ptr_word;
- }
-
- mask = ~ (u_int32_t) 0;
- offset = 0;
- ptr_mask = strchr (ptr_word, '/');
- if (ptr_mask != NULL) {
- int bit_count;
- char *endp;
-
- bit_count = (int) strtol (ptr_mask+1, &endp, 10);
- if (bit_count <= 0 || bit_count > 32) {
- warn("invalid address length %v in auth. address list",
- ptr_mask+1);
- continue;
- }
- bit_count = 32 - bit_count; /* # bits in host part */
- if (*endp == '+') {
- offset = ifunit + 1;
- ++endp;
- }
- if (*endp != 0) {
- warn("invalid address length syntax: %v", ptr_mask+1);
- continue;
- }
- *ptr_mask = '\0';
- mask <<= bit_count;
- }
-
- hp = gethostbyname(ptr_word);
- if (hp != NULL && hp->h_addrtype == AF_INET) {
- a = *(u_int32_t *)hp->h_addr;
- } else {
- printf("*** getnetbyname is unsupported, please report bug! ***\n");
- return;
- }
-
- if (ptr_mask != NULL)
- *ptr_mask = '/';
-
- if (a == (u_int32_t)-1L) {
- warn("unknown host %s in auth. address list", ap->word);
- continue;
- }
- if (offset != 0) {
- if (offset >= ~mask) {
- warn("interface unit %d too large for subnet %v",
- ifunit, ptr_word);
- continue;
- }
- a = htonl((ntohl(a) & mask) + offset);
- mask = ~(u_int32_t)0;
- }
- ip[n].mask = htonl(mask);
- ip[n].base = a & ip[n].mask;
- ++n;
- if (~mask == 0 && suggested_ip == 0)
- suggested_ip = a;
- }
- *plink = NULL;
-
- ip[n].permit = 0; /* make the last entry forbid all addresses */
- ip[n].base = 0; /* to terminate the list */
- ip[n].mask = 0;
-
- addresses[unit] = ip;
-
- /*
- * If the address given for the peer isn't authorized, or if
- * the user hasn't given one, AND there is an authorized address
- * which is a single host, then use that if we find one.
- */
- if (suggested_ip != 0
- && (wo->hisaddr == 0 || !auth_ip_addr(unit, wo->hisaddr))) {
- wo->hisaddr = suggested_ip;
- /*
- * Do we insist on this address? No, if there are other
- * addresses authorized than the suggested one.
- */
- if (n > 1)
- wo->accept_remote = 1;
- }
-}
-
-/*
- * auth_ip_addr - check whether the peer is authorized to use
- * a given IP address. Returns 1 if authorized, 0 otherwise.
- */
-int
-auth_ip_addr(unit, addr)
- int unit;
- u_int32_t addr;
-{
- int ok;
-
- /* don't allow loopback or multicast address */
- if (bad_ip_adrs(addr))
- return 0;
-
- if (addresses[unit] != NULL) {
- ok = ip_addr_check(addr, addresses[unit]);
- if (ok >= 0)
- return ok;
- }
- if (auth_required)
- return 0; /* no addresses authorized */
- return allow_any_ip || privileged || !have_route_to(addr);
-}
-
-static int
-ip_addr_check(addr, addrs)
- u_int32_t addr;
- struct permitted_ip *addrs;
-{
- for (; ; ++addrs)
- if ((addr & addrs->mask) == addrs->base)
- return addrs->permit;
-}
-
-/*
- * bad_ip_adrs - return 1 if the IP address is one we don't want
- * to use, such as an address in the loopback net or a multicast address.
- * addr is in network byte order.
- */
-int
-bad_ip_adrs(addr)
- u_int32_t addr;
-{
- addr = ntohl(addr);
- return (addr >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET
- || IN_MULTICAST(addr) || IN_BADCLASS(addr);
-}
-
-/*
- * some_ip_ok - check a wordlist to see if it authorizes any
- * IP address(es).
- */
-static int
-some_ip_ok(addrs)
- struct wordlist *addrs;
-{
- for (; addrs != 0; addrs = addrs->next) {
- if (addrs->word[0] == '-')
- break;
- if (addrs->word[0] != '!')
- return 1; /* some IP address is allowed */
- }
- return 0;
-}
-
-/*
- * check_access - complain if a secret file has too-liberal permissions.
- */
-static void
-check_access(f, filename)
- FILE *f;
- char *filename;
-{
- struct stat sbuf;
-
- if (fstat(fileno(f), &sbuf) < 0) {
- warn("cannot stat secret file %s: %m", filename);
- } else if ((sbuf.st_mode & (S_IRWXG | S_IRWXO)) != 0) {
- warn("Warning - secret file %s has world and/or group access",
- filename);
- }
-}
-
-
-/*
- * scan_authfile - Scan an authorization file for a secret suitable
- * for authenticating `client' on `server'. The return value is -1
- * if no secret is found, otherwise >= 0. The return value has
- * NONWILD_CLIENT set if the secret didn't have "*" for the client, and
- * NONWILD_SERVER set if the secret didn't have "*" for the server.
- * Any following words on the line up to a "--" (i.e. address authorization
- * info) are placed in a wordlist and returned in *addrs. Any
- * following words (extra options) are placed in a wordlist and
- * returned in *opts.
- * We assume secret is NULL or points to MAXWORDLEN bytes of space.
- */
-static int
-scan_authfile(f, client, server, secret, addrs, opts, filename)
- FILE *f;
- char *client;
- char *server;
- char *secret;
- struct wordlist **addrs;
- struct wordlist **opts;
- char *filename;
-{
- int newline, xxx;
- int got_flag, best_flag;
- FILE *sf;
- struct wordlist *ap, *addr_list, *alist, **app;
- char word[MAXWORDLEN];
- char atfile[MAXWORDLEN];
- char lsecret[MAXWORDLEN];
-
- if (addrs != NULL)
- *addrs = NULL;
- if (opts != NULL)
- *opts = NULL;
- addr_list = NULL;
- if (!getword(f, word, &newline, filename))
- return -1; /* file is empty??? */
- newline = 1;
- best_flag = -1;
- for (;;) {
- /*
- * Skip until we find a word at the start of a line.
- */
- while (!newline && getword(f, word, &newline, filename))
- ;
- if (!newline)
- break; /* got to end of file */
-
- /*
- * Got a client - check if it's a match or a wildcard.
- */
- got_flag = 0;
- if (client != NULL && strcmp(word, client) != 0 && !ISWILD(word)) {
- newline = 0;
- continue;
- }
- if (!ISWILD(word))
- got_flag = NONWILD_CLIENT;
-
- /*
- * Now get a server and check if it matches.
- */
- if (!getword(f, word, &newline, filename))
- break;
- if (newline)
- continue;
- if (!ISWILD(word)) {
- if (server != NULL && strcmp(word, server) != 0)
- continue;
- got_flag |= NONWILD_SERVER;
- }
-
- /*
- * Got some sort of a match - see if it's better than what
- * we have already.
- */
- if (got_flag <= best_flag)
- continue;
-
- /*
- * Get the secret.
- */
- if (!getword(f, word, &newline, filename))
- break;
- if (newline)
- continue;
-
- if (secret != NULL) {
- /*
- * Special syntax: @/pathname means read secret from file.
- */
- if (word[0] == '@' && word[1] == '/') {
- strlcpy(atfile, word+1, sizeof(atfile));
- if ((sf = fopen(atfile, "r")) == NULL) {
- warn("can't open indirect secret file %s", atfile);
- continue;
- }
- check_access(sf, atfile);
- if (!getword(sf, word, &xxx, atfile)) {
- warn("no secret in indirect secret file %s", atfile);
- fclose(sf);
- continue;
- }
- fclose(sf);
- }
- strlcpy(lsecret, word, sizeof(lsecret));
- }
-
- /*
- * Now read address authorization info and make a wordlist.
- */
- app = &alist;
- for (;;) {
- if (!getword(f, word, &newline, filename) || newline)
- break;
- ap = (struct wordlist *)
- malloc(sizeof(struct wordlist) + strlen(word) + 1);
- if (ap == NULL)
- novm("authorized addresses");
- ap->word = (char *) (ap + 1);
- strcpy(ap->word, word);
- *app = ap;
- app = &ap->next;
- }
- *app = NULL;
-
- /*
- * This is the best so far; remember it.
- */
- best_flag = got_flag;
- if (addr_list)
- free_wordlist(addr_list);
- addr_list = alist;
- if (secret != NULL)
- strlcpy(secret, lsecret, MAXWORDLEN);
-
- if (!newline)
- break;
- }
-
- /* scan for a -- word indicating the start of options */
- for (app = &addr_list; (ap = *app) != NULL; app = &ap->next)
- if (strcmp(ap->word, "--") == 0)
- break;
- /* ap = start of options */
- if (ap != NULL) {
- ap = ap->next; /* first option */
- free(*app); /* free the "--" word */
- *app = NULL; /* terminate addr list */
- }
- if (opts != NULL)
- *opts = ap;
- else if (ap != NULL)
- free_wordlist(ap);
- if (addrs != NULL)
- *addrs = addr_list;
- else if (addr_list != NULL)
- free_wordlist(addr_list);
-
- return best_flag;
-}
-
-/*
- * wordlist_count - return the number of items in a wordlist
- */
-static int
-wordlist_count(wp)
- struct wordlist *wp;
-{
- int n;
-
- for (n = 0; wp != NULL; wp = wp->next)
- ++n;
- return n;
-}
-
-/*
- * free_wordlist - release memory allocated for a wordlist.
- */
-static void
-free_wordlist(wp)
- struct wordlist *wp;
-{
- struct wordlist *next;
-
- while (wp != NULL) {
- next = wp->next;
- free(wp);
- wp = next;
- }
-}
-
-/*
- * auth_script_done - called when the auth-up or auth-down script
- * has finished.
- */
-static void
-auth_script_done(arg)
- void *arg;
-{
- auth_script_pid = 0;
- switch (auth_script_state) {
- case s_up:
- if (auth_state == s_down) {
- auth_script_state = s_down;
- auth_script(_PATH_AUTHDOWN);
- }
- break;
- case s_down:
- if (auth_state == s_up) {
- auth_script_state = s_up;
- auth_script(_PATH_AUTHUP);
- }
- break;
- }
-}
-
-/*
- * auth_script - execute a script with arguments
- * interface-name peer-name real-user tty speed
- */
-static void
-auth_script(script)
- char *script;
-{
- char strspeed[32];
- struct passwd *pw;
- char struid[32];
- char *user_name;
- char *argv[8];
-
- if ((pw = getpwuid(getuid())) != NULL && pw->pw_name != NULL)
- user_name = pw->pw_name;
- else {
- slprintf(struid, sizeof(struid), "%d", getuid());
- user_name = struid;
- }
- slprintf(strspeed, sizeof(strspeed), "%d", baud_rate);
-
- argv[0] = script;
- argv[1] = ifname;
- argv[2] = peer_authname;
- argv[3] = user_name;
- argv[4] = devnam;
- argv[5] = strspeed;
- argv[6] = NULL;
-
- auth_script_pid = run_program(script, argv, 0, auth_script_done, NULL);
-}
diff --git a/mdk-stage1/ppp/pppd/cbcp.c b/mdk-stage1/ppp/pppd/cbcp.c
deleted file mode 100644
index 8c57b3cde..000000000
--- a/mdk-stage1/ppp/pppd/cbcp.c
+++ /dev/null
@@ -1,456 +0,0 @@
-/*
- * cbcp - Call Back Configuration Protocol.
- *
- * Copyright (c) 1995 Pedro Roque Marques
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Pedro Roque Marques. The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-#include "pppd.h"
-#include "cbcp.h"
-#include "fsm.h"
-#include "lcp.h"
-
-static const char rcsid[] = RCSID;
-
-/*
- * Options.
- */
-static int setcbcp __P((char **));
-
-static option_t cbcp_option_list[] = {
- { "callback", o_special, setcbcp,
- "Ask for callback", OPT_PRIO | OPT_A2STRVAL, &cbcp[0].us_number },
- { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-static void cbcp_init __P((int unit));
-static void cbcp_open __P((int unit));
-static void cbcp_lowerup __P((int unit));
-static void cbcp_input __P((int unit, u_char *pkt, int len));
-static void cbcp_protrej __P((int unit));
-static int cbcp_printpkt __P((u_char *pkt, int len,
- void (*printer) __P((void *, char *, ...)),
- void *arg));
-
-struct protent cbcp_protent = {
- PPP_CBCP,
- cbcp_init,
- cbcp_input,
- cbcp_protrej,
- cbcp_lowerup,
- NULL,
- cbcp_open,
- NULL,
- cbcp_printpkt,
- NULL,
- 0,
- "CBCP",
- NULL,
- cbcp_option_list,
- NULL,
- NULL,
- NULL
-};
-
-cbcp_state cbcp[NUM_PPP];
-
-/* internal prototypes */
-
-static void cbcp_recvreq __P((cbcp_state *us, char *pckt, int len));
-static void cbcp_resp __P((cbcp_state *us));
-static void cbcp_up __P((cbcp_state *us));
-static void cbcp_recvack __P((cbcp_state *us, char *pckt, int len));
-static void cbcp_send __P((cbcp_state *us, u_char code, u_char *buf, int len));
-
-/* option processing */
-static int
-setcbcp(argv)
- char **argv;
-{
- lcp_wantoptions[0].neg_cbcp = 1;
- cbcp_protent.enabled_flag = 1;
- cbcp[0].us_number = strdup(*argv);
- if (cbcp[0].us_number == 0)
- novm("callback number");
- cbcp[0].us_type |= (1 << CB_CONF_USER);
- cbcp[0].us_type |= (1 << CB_CONF_ADMIN);
- return (1);
-}
-
-/* init state */
-static void
-cbcp_init(iface)
- int iface;
-{
- cbcp_state *us;
-
- us = &cbcp[iface];
- memset(us, 0, sizeof(cbcp_state));
- us->us_unit = iface;
- us->us_type |= (1 << CB_CONF_NO);
-}
-
-/* lower layer is up */
-static void
-cbcp_lowerup(iface)
- int iface;
-{
- cbcp_state *us = &cbcp[iface];
-
- dbglog("cbcp_lowerup");
- dbglog("want: %d", us->us_type);
-
- if (us->us_type == CB_CONF_USER)
- dbglog("phone no: %s", us->us_number);
-}
-
-static void
-cbcp_open(unit)
- int unit;
-{
- dbglog("cbcp_open");
-}
-
-/* process an incomming packet */
-static void
-cbcp_input(unit, inpacket, pktlen)
- int unit;
- u_char *inpacket;
- int pktlen;
-{
- u_char *inp;
- u_char code, id;
- u_short len;
-
- cbcp_state *us = &cbcp[unit];
-
- inp = inpacket;
-
- if (pktlen < CBCP_MINLEN) {
- error("CBCP packet is too small");
- return;
- }
-
- GETCHAR(code, inp);
- GETCHAR(id, inp);
- GETSHORT(len, inp);
-
-#if 0
- if (len > pktlen) {
- error("CBCP packet: invalid length");
- return;
- }
-#endif
-
- len -= CBCP_MINLEN;
-
- switch(code) {
- case CBCP_REQ:
- us->us_id = id;
- cbcp_recvreq(us, inp, len);
- break;
-
- case CBCP_RESP:
- dbglog("CBCP_RESP received");
- break;
-
- case CBCP_ACK:
- if (id != us->us_id)
- dbglog("id doesn't match: expected %d recv %d",
- us->us_id, id);
-
- cbcp_recvack(us, inp, len);
- break;
-
- default:
- break;
- }
-}
-
-/* protocol was rejected by foe */
-void cbcp_protrej(int iface)
-{
-}
-
-char *cbcp_codenames[] = {
- "Request", "Response", "Ack"
-};
-
-char *cbcp_optionnames[] = {
- "NoCallback",
- "UserDefined",
- "AdminDefined",
- "List"
-};
-
-/* pretty print a packet */
-static int
-cbcp_printpkt(p, plen, printer, arg)
- u_char *p;
- int plen;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int code, opt, id, len, olen, delay;
- u_char *pstart;
-
- if (plen < HEADERLEN)
- return 0;
- pstart = p;
- GETCHAR(code, p);
- GETCHAR(id, p);
- GETSHORT(len, p);
- if (len < HEADERLEN || len > plen)
- return 0;
-
- if (code >= 1 && code <= sizeof(cbcp_codenames) / sizeof(char *))
- printer(arg, " %s", cbcp_codenames[code-1]);
- else
- printer(arg, " code=0x%x", code);
-
- printer(arg, " id=0x%x", id);
- len -= HEADERLEN;
-
- switch (code) {
- case CBCP_REQ:
- case CBCP_RESP:
- case CBCP_ACK:
- while(len >= 2) {
- GETCHAR(opt, p);
- GETCHAR(olen, p);
-
- if (olen < 2 || olen > len) {
- break;
- }
-
- printer(arg, " <");
- len -= olen;
-
- if (opt >= 1 && opt <= sizeof(cbcp_optionnames) / sizeof(char *))
- printer(arg, " %s", cbcp_optionnames[opt-1]);
- else
- printer(arg, " option=0x%x", opt);
-
- if (olen > 2) {
- GETCHAR(delay, p);
- printer(arg, " delay = %d", delay);
- }
-
- if (olen > 3) {
- int addrt;
- char str[256];
-
- GETCHAR(addrt, p);
- memcpy(str, p, olen - 4);
- str[olen - 4] = 0;
- printer(arg, " number = %s", str);
- }
- printer(arg, ">");
- break;
- }
-
- default:
- break;
- }
-
- for (; len > 0; --len) {
- GETCHAR(code, p);
- printer(arg, " %.2x", code);
- }
-
- return p - pstart;
-}
-
-/* received CBCP request */
-static void
-cbcp_recvreq(us, pckt, pcktlen)
- cbcp_state *us;
- char *pckt;
- int pcktlen;
-{
- u_char type, opt_len, delay, addr_type;
- char address[256];
- int len = pcktlen;
-
- address[0] = 0;
-
- while (len) {
- dbglog("length: %d", len);
-
- GETCHAR(type, pckt);
- GETCHAR(opt_len, pckt);
-
- if (opt_len > 2)
- GETCHAR(delay, pckt);
-
- us->us_allowed |= (1 << type);
-
- switch(type) {
- case CB_CONF_NO:
- dbglog("no callback allowed");
- break;
-
- case CB_CONF_USER:
- dbglog("user callback allowed");
- if (opt_len > 4) {
- GETCHAR(addr_type, pckt);
- memcpy(address, pckt, opt_len - 4);
- address[opt_len - 4] = 0;
- if (address[0])
- dbglog("address: %s", address);
- }
- break;
-
- case CB_CONF_ADMIN:
- dbglog("user admin defined allowed");
- break;
-
- case CB_CONF_LIST:
- break;
- }
- len -= opt_len;
- }
-
- cbcp_resp(us);
-}
-
-static void
-cbcp_resp(us)
- cbcp_state *us;
-{
- u_char cb_type;
- u_char buf[256];
- u_char *bufp = buf;
- int len = 0;
-
- cb_type = us->us_allowed & us->us_type;
- dbglog("cbcp_resp cb_type=%d", cb_type);
-
-#if 0
- if (!cb_type)
- lcp_down(us->us_unit);
-#endif
-
- if (cb_type & ( 1 << CB_CONF_USER ) ) {
- dbglog("cbcp_resp CONF_USER");
- PUTCHAR(CB_CONF_USER, bufp);
- len = 3 + 1 + strlen(us->us_number) + 1;
- PUTCHAR(len , bufp);
- PUTCHAR(5, bufp); /* delay */
- PUTCHAR(1, bufp);
- BCOPY(us->us_number, bufp, strlen(us->us_number) + 1);
- cbcp_send(us, CBCP_RESP, buf, len);
- return;
- }
-
- if (cb_type & ( 1 << CB_CONF_ADMIN ) ) {
- dbglog("cbcp_resp CONF_ADMIN");
- PUTCHAR(CB_CONF_ADMIN, bufp);
- len = 3;
- PUTCHAR(len, bufp);
- PUTCHAR(5, bufp); /* delay */
- cbcp_send(us, CBCP_RESP, buf, len);
- return;
- }
-
- if (cb_type & ( 1 << CB_CONF_NO ) ) {
- dbglog("cbcp_resp CONF_NO");
- PUTCHAR(CB_CONF_NO, bufp);
- len = 3;
- PUTCHAR(len , bufp);
- PUTCHAR(0, bufp);
- cbcp_send(us, CBCP_RESP, buf, len);
- start_networks();
- return;
- }
-}
-
-static void
-cbcp_send(us, code, buf, len)
- cbcp_state *us;
- u_char code;
- u_char *buf;
- int len;
-{
- u_char *outp;
- int outlen;
-
- outp = outpacket_buf;
-
- outlen = 4 + len;
-
- MAKEHEADER(outp, PPP_CBCP);
-
- PUTCHAR(code, outp);
- PUTCHAR(us->us_id, outp);
- PUTSHORT(outlen, outp);
-
- if (len)
- BCOPY(buf, outp, len);
-
- output(us->us_unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
-
-static void
-cbcp_recvack(us, pckt, len)
- cbcp_state *us;
- char *pckt;
- int len;
-{
- u_char type, delay, addr_type;
- int opt_len;
- char address[256];
-
- if (len) {
- GETCHAR(type, pckt);
- GETCHAR(opt_len, pckt);
-
- if (opt_len > 2)
- GETCHAR(delay, pckt);
-
- if (opt_len > 4) {
- GETCHAR(addr_type, pckt);
- memcpy(address, pckt, opt_len - 4);
- address[opt_len - 4] = 0;
- if (address[0])
- dbglog("peer will call: %s", address);
- }
- if (type == CB_CONF_NO)
- return;
- }
-
- cbcp_up(us);
-}
-
-/* ok peer will do callback */
-static void
-cbcp_up(us)
- cbcp_state *us;
-{
- persist = 0;
- lcp_close(0, "Call me back, please");
- status = EXIT_CALLBACK;
-}
diff --git a/mdk-stage1/ppp/pppd/cbcp.h b/mdk-stage1/ppp/pppd/cbcp.h
deleted file mode 100644
index c2ab3f689..000000000
--- a/mdk-stage1/ppp/pppd/cbcp.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef CBCP_H
-#define CBCP_H
-
-typedef struct cbcp_state {
- int us_unit; /* Interface unit number */
- u_char us_id; /* Current id */
- u_char us_allowed;
- int us_type;
- char *us_number; /* Telefone Number */
-} cbcp_state;
-
-extern cbcp_state cbcp[];
-
-extern struct protent cbcp_protent;
-
-#define CBCP_MINLEN 4
-
-#define CBCP_REQ 1
-#define CBCP_RESP 2
-#define CBCP_ACK 3
-
-#define CB_CONF_NO 1
-#define CB_CONF_USER 2
-#define CB_CONF_ADMIN 3
-#define CB_CONF_LIST 4
-#endif
diff --git a/mdk-stage1/ppp/pppd/ccp.c b/mdk-stage1/ppp/pppd/ccp.c
deleted file mode 100644
index 7e36e384e..000000000
--- a/mdk-stage1/ppp/pppd/ccp.c
+++ /dev/null
@@ -1,1257 +0,0 @@
-/*
- * ccp.c - PPP Compression Control Protocol.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#define RCSID "$Id$"
-
-#include <stdlib.h>
-#include <string.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ccp.h"
-#include <net/ppp-comp.h>
-
-static const char rcsid[] = RCSID;
-
-/*
- * Unfortunately there is a bug in zlib which means that using a
- * size of 8 (window size = 256) for Deflate compression will cause
- * buffer overruns and kernel crashes in the deflate module.
- * Until this is fixed we only accept sizes in the range 9 .. 15.
- * Thanks to James Carlson for pointing this out.
- */
-#define DEFLATE_MIN_WORKS 9
-
-/*
- * Command-line options.
- */
-static int setbsdcomp __P((char **));
-static int setdeflate __P((char **));
-static char bsd_value[8];
-static char deflate_value[8];
-
-static option_t ccp_option_list[] = {
- { "noccp", o_bool, &ccp_protent.enabled_flag,
- "Disable CCP negotiation" },
- { "-ccp", o_bool, &ccp_protent.enabled_flag,
- "Disable CCP negotiation", OPT_ALIAS },
-
- { "bsdcomp", o_special, (void *)setbsdcomp,
- "Request BSD-Compress packet compression",
- OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, bsd_value },
- { "nobsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
- "don't allow BSD-Compress", OPT_PRIOSUB | OPT_A2CLR,
- &ccp_allowoptions[0].bsd_compress },
- { "-bsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
- "don't allow BSD-Compress", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
- &ccp_allowoptions[0].bsd_compress },
-
- { "deflate", o_special, (void *)setdeflate,
- "request Deflate compression",
- OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, deflate_value },
- { "nodeflate", o_bool, &ccp_wantoptions[0].deflate,
- "don't allow Deflate compression", OPT_PRIOSUB | OPT_A2CLR,
- &ccp_allowoptions[0].deflate },
- { "-deflate", o_bool, &ccp_wantoptions[0].deflate,
- "don't allow Deflate compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
- &ccp_allowoptions[0].deflate },
-
- { "nodeflatedraft", o_bool, &ccp_wantoptions[0].deflate_draft,
- "don't use draft deflate #", OPT_A2COPY,
- &ccp_allowoptions[0].deflate_draft },
-
- { "predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
- "request Predictor-1", 1, &ccp_allowoptions[0].predictor_1, OPT_PRIO },
- { "nopredictor1", o_bool, &ccp_wantoptions[0].predictor_1,
- "don't allow Predictor-1", OPT_PRIOSUB | OPT_A2CLR,
- &ccp_allowoptions[0].predictor_1 },
- { "-predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
- "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
- &ccp_allowoptions[0].predictor_1 },
-
- { NULL }
-};
-
-/*
- * Protocol entry points from main code.
- */
-static void ccp_init __P((int unit));
-static void ccp_open __P((int unit));
-static void ccp_close __P((int unit, char *));
-static void ccp_lowerup __P((int unit));
-static void ccp_lowerdown __P((int));
-static void ccp_input __P((int unit, u_char *pkt, int len));
-static void ccp_protrej __P((int unit));
-static int ccp_printpkt __P((u_char *pkt, int len,
- void (*printer) __P((void *, char *, ...)),
- void *arg));
-static void ccp_datainput __P((int unit, u_char *pkt, int len));
-
-struct protent ccp_protent = {
- PPP_CCP,
- ccp_init,
- ccp_input,
- ccp_protrej,
- ccp_lowerup,
- ccp_lowerdown,
- ccp_open,
- ccp_close,
- ccp_printpkt,
- ccp_datainput,
- 1,
- "CCP",
- "Compressed",
- ccp_option_list,
- NULL,
- NULL,
- NULL
-};
-
-fsm ccp_fsm[NUM_PPP];
-ccp_options ccp_wantoptions[NUM_PPP]; /* what to request the peer to use */
-ccp_options ccp_gotoptions[NUM_PPP]; /* what the peer agreed to do */
-ccp_options ccp_allowoptions[NUM_PPP]; /* what we'll agree to do */
-ccp_options ccp_hisoptions[NUM_PPP]; /* what we agreed to do */
-
-/*
- * Callbacks for fsm code.
- */
-static void ccp_resetci __P((fsm *));
-static int ccp_cilen __P((fsm *));
-static void ccp_addci __P((fsm *, u_char *, int *));
-static int ccp_ackci __P((fsm *, u_char *, int));
-static int ccp_nakci __P((fsm *, u_char *, int));
-static int ccp_rejci __P((fsm *, u_char *, int));
-static int ccp_reqci __P((fsm *, u_char *, int *, int));
-static void ccp_up __P((fsm *));
-static void ccp_down __P((fsm *));
-static int ccp_extcode __P((fsm *, int, int, u_char *, int));
-static void ccp_rack_timeout __P((void *));
-static char *method_name __P((ccp_options *, ccp_options *));
-
-static fsm_callbacks ccp_callbacks = {
- ccp_resetci,
- ccp_cilen,
- ccp_addci,
- ccp_ackci,
- ccp_nakci,
- ccp_rejci,
- ccp_reqci,
- ccp_up,
- ccp_down,
- NULL,
- NULL,
- NULL,
- NULL,
- ccp_extcode,
- "CCP"
-};
-
-/*
- * Do we want / did we get any compression?
- */
-#define ANY_COMPRESS(opt) ((opt).deflate || (opt).bsd_compress \
- || (opt).predictor_1 || (opt).predictor_2)
-
-/*
- * Local state (mainly for handling reset-reqs and reset-acks).
- */
-static int ccp_localstate[NUM_PPP];
-#define RACK_PENDING 1 /* waiting for reset-ack */
-#define RREQ_REPEAT 2 /* send another reset-req if no reset-ack */
-
-#define RACKTIMEOUT 1 /* second */
-
-static int all_rejected[NUM_PPP]; /* we rejected all peer's options */
-
-/*
- * Option parsing.
- */
-static int
-setbsdcomp(argv)
- char **argv;
-{
- int rbits, abits;
- char *str, *endp;
-
- str = *argv;
- abits = rbits = strtol(str, &endp, 0);
- if (endp != str && *endp == ',') {
- str = endp + 1;
- abits = strtol(str, &endp, 0);
- }
- if (*endp != 0 || endp == str) {
- option_error("invalid parameter '%s' for bsdcomp option", *argv);
- return 0;
- }
- if ((rbits != 0 && (rbits < BSD_MIN_BITS || rbits > BSD_MAX_BITS))
- || (abits != 0 && (abits < BSD_MIN_BITS || abits > BSD_MAX_BITS))) {
- option_error("bsdcomp option values must be 0 or %d .. %d",
- BSD_MIN_BITS, BSD_MAX_BITS);
- return 0;
- }
- if (rbits > 0) {
- ccp_wantoptions[0].bsd_compress = 1;
- ccp_wantoptions[0].bsd_bits = rbits;
- } else
- ccp_wantoptions[0].bsd_compress = 0;
- if (abits > 0) {
- ccp_allowoptions[0].bsd_compress = 1;
- ccp_allowoptions[0].bsd_bits = abits;
- } else
- ccp_allowoptions[0].bsd_compress = 0;
- slprintf(bsd_value, sizeof(bsd_value),
- rbits == abits? "%d": "%d,%d", rbits, abits);
-
- return 1;
-}
-
-static int
-setdeflate(argv)
- char **argv;
-{
- int rbits, abits;
- char *str, *endp;
-
- str = *argv;
- abits = rbits = strtol(str, &endp, 0);
- if (endp != str && *endp == ',') {
- str = endp + 1;
- abits = strtol(str, &endp, 0);
- }
- if (*endp != 0 || endp == str) {
- option_error("invalid parameter '%s' for deflate option", *argv);
- return 0;
- }
- if ((rbits != 0 && (rbits < DEFLATE_MIN_SIZE || rbits > DEFLATE_MAX_SIZE))
- || (abits != 0 && (abits < DEFLATE_MIN_SIZE
- || abits > DEFLATE_MAX_SIZE))) {
- option_error("deflate option values must be 0 or %d .. %d",
- DEFLATE_MIN_SIZE, DEFLATE_MAX_SIZE);
- return 0;
- }
- if (rbits == DEFLATE_MIN_SIZE || abits == DEFLATE_MIN_SIZE) {
- if (rbits == DEFLATE_MIN_SIZE)
- rbits = DEFLATE_MIN_WORKS;
- if (abits == DEFLATE_MIN_SIZE)
- abits = DEFLATE_MIN_WORKS;
- warn("deflate option value of %d changed to %d to avoid zlib bug",
- DEFLATE_MIN_SIZE, DEFLATE_MIN_WORKS);
- }
- if (rbits > 0) {
- ccp_wantoptions[0].deflate = 1;
- ccp_wantoptions[0].deflate_size = rbits;
- } else
- ccp_wantoptions[0].deflate = 0;
- if (abits > 0) {
- ccp_allowoptions[0].deflate = 1;
- ccp_allowoptions[0].deflate_size = abits;
- } else
- ccp_allowoptions[0].deflate = 0;
- slprintf(deflate_value, sizeof(deflate_value),
- rbits == abits? "%d": "%d,%d", rbits, abits);
-
- return 1;
-}
-
-/*
- * ccp_init - initialize CCP.
- */
-static void
-ccp_init(unit)
- int unit;
-{
- fsm *f = &ccp_fsm[unit];
-
- f->unit = unit;
- f->protocol = PPP_CCP;
- f->callbacks = &ccp_callbacks;
- fsm_init(f);
-
- memset(&ccp_wantoptions[unit], 0, sizeof(ccp_options));
- memset(&ccp_gotoptions[unit], 0, sizeof(ccp_options));
- memset(&ccp_allowoptions[unit], 0, sizeof(ccp_options));
- memset(&ccp_hisoptions[unit], 0, sizeof(ccp_options));
-
- ccp_wantoptions[0].deflate = 1;
- ccp_wantoptions[0].deflate_size = DEFLATE_MAX_SIZE;
- ccp_wantoptions[0].deflate_correct = 1;
- ccp_wantoptions[0].deflate_draft = 1;
- ccp_allowoptions[0].deflate = 1;
- ccp_allowoptions[0].deflate_size = DEFLATE_MAX_SIZE;
- ccp_allowoptions[0].deflate_correct = 1;
- ccp_allowoptions[0].deflate_draft = 1;
-
- ccp_wantoptions[0].bsd_compress = 1;
- ccp_wantoptions[0].bsd_bits = BSD_MAX_BITS;
- ccp_allowoptions[0].bsd_compress = 1;
- ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS;
-
- ccp_allowoptions[0].predictor_1 = 1;
-}
-
-/*
- * ccp_open - CCP is allowed to come up.
- */
-static void
-ccp_open(unit)
- int unit;
-{
- fsm *f = &ccp_fsm[unit];
-
- if (f->state != OPENED)
- ccp_flags_set(unit, 1, 0);
-
- /*
- * Find out which compressors the kernel supports before
- * deciding whether to open in silent mode.
- */
- ccp_resetci(f);
- if (!ANY_COMPRESS(ccp_gotoptions[unit]))
- f->flags |= OPT_SILENT;
-
- fsm_open(f);
-}
-
-/*
- * ccp_close - Terminate CCP.
- */
-static void
-ccp_close(unit, reason)
- int unit;
- char *reason;
-{
- ccp_flags_set(unit, 0, 0);
- fsm_close(&ccp_fsm[unit], reason);
-}
-
-/*
- * ccp_lowerup - we may now transmit CCP packets.
- */
-static void
-ccp_lowerup(unit)
- int unit;
-{
- fsm_lowerup(&ccp_fsm[unit]);
-}
-
-/*
- * ccp_lowerdown - we may not transmit CCP packets.
- */
-static void
-ccp_lowerdown(unit)
- int unit;
-{
- fsm_lowerdown(&ccp_fsm[unit]);
-}
-
-/*
- * ccp_input - process a received CCP packet.
- */
-static void
-ccp_input(unit, p, len)
- int unit;
- u_char *p;
- int len;
-{
- fsm *f = &ccp_fsm[unit];
- int oldstate;
-
- /*
- * Check for a terminate-request so we can print a message.
- */
- oldstate = f->state;
- fsm_input(f, p, len);
- if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED)
- notice("Compression disabled by peer.");
-
- /*
- * If we get a terminate-ack and we're not asking for compression,
- * close CCP.
- */
- if (oldstate == REQSENT && p[0] == TERMACK
- && !ANY_COMPRESS(ccp_gotoptions[unit]))
- ccp_close(unit, "No compression negotiated");
-}
-
-/*
- * Handle a CCP-specific code.
- */
-static int
-ccp_extcode(f, code, id, p, len)
- fsm *f;
- int code, id;
- u_char *p;
- int len;
-{
- switch (code) {
- case CCP_RESETREQ:
- if (f->state != OPENED)
- break;
- /* send a reset-ack, which the transmitter will see and
- reset its compression state. */
- fsm_sdata(f, CCP_RESETACK, id, NULL, 0);
- break;
-
- case CCP_RESETACK:
- if (ccp_localstate[f->unit] & RACK_PENDING && id == f->reqid) {
- ccp_localstate[f->unit] &= ~(RACK_PENDING | RREQ_REPEAT);
- UNTIMEOUT(ccp_rack_timeout, f);
- }
- break;
-
- default:
- return 0;
- }
-
- return 1;
-}
-
-/*
- * ccp_protrej - peer doesn't talk CCP.
- */
-static void
-ccp_protrej(unit)
- int unit;
-{
- ccp_flags_set(unit, 0, 0);
- fsm_lowerdown(&ccp_fsm[unit]);
-}
-
-/*
- * ccp_resetci - initialize at start of negotiation.
- */
-static void
-ccp_resetci(f)
- fsm *f;
-{
- ccp_options *go = &ccp_gotoptions[f->unit];
- u_char opt_buf[16];
-
- *go = ccp_wantoptions[f->unit];
- all_rejected[f->unit] = 0;
-
- /*
- * Check whether the kernel knows about the various
- * compression methods we might request.
- */
- if (go->bsd_compress) {
- opt_buf[0] = CI_BSD_COMPRESS;
- opt_buf[1] = CILEN_BSD_COMPRESS;
- opt_buf[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, BSD_MIN_BITS);
- if (ccp_test(f->unit, opt_buf, CILEN_BSD_COMPRESS, 0) <= 0)
- go->bsd_compress = 0;
- }
- if (go->deflate) {
- if (go->deflate_correct) {
- opt_buf[0] = CI_DEFLATE;
- opt_buf[1] = CILEN_DEFLATE;
- opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
- opt_buf[3] = DEFLATE_CHK_SEQUENCE;
- if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
- go->deflate_correct = 0;
- }
- if (go->deflate_draft) {
- opt_buf[0] = CI_DEFLATE_DRAFT;
- opt_buf[1] = CILEN_DEFLATE;
- opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
- opt_buf[3] = DEFLATE_CHK_SEQUENCE;
- if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
- go->deflate_draft = 0;
- }
- if (!go->deflate_correct && !go->deflate_draft)
- go->deflate = 0;
- }
- if (go->predictor_1) {
- opt_buf[0] = CI_PREDICTOR_1;
- opt_buf[1] = CILEN_PREDICTOR_1;
- if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_1, 0) <= 0)
- go->predictor_1 = 0;
- }
- if (go->predictor_2) {
- opt_buf[0] = CI_PREDICTOR_2;
- opt_buf[1] = CILEN_PREDICTOR_2;
- if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_2, 0) <= 0)
- go->predictor_2 = 0;
- }
-}
-
-/*
- * ccp_cilen - Return total length of our configuration info.
- */
-static int
-ccp_cilen(f)
- fsm *f;
-{
- ccp_options *go = &ccp_gotoptions[f->unit];
-
- return (go->bsd_compress? CILEN_BSD_COMPRESS: 0)
- + (go->deflate? CILEN_DEFLATE: 0)
- + (go->predictor_1? CILEN_PREDICTOR_1: 0)
- + (go->predictor_2? CILEN_PREDICTOR_2: 0);
-}
-
-/*
- * ccp_addci - put our requests in a packet.
- */
-static void
-ccp_addci(f, p, lenp)
- fsm *f;
- u_char *p;
- int *lenp;
-{
- int res;
- ccp_options *go = &ccp_gotoptions[f->unit];
- u_char *p0 = p;
-
- /*
- * Add the compression types that we can receive, in decreasing
- * preference order. Get the kernel to allocate the first one
- * in case it gets Acked.
- */
- if (go->deflate) {
- p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT;
- p[1] = CILEN_DEFLATE;
- p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
- p[3] = DEFLATE_CHK_SEQUENCE;
- for (;;) {
- res = ccp_test(f->unit, p, CILEN_DEFLATE, 0);
- if (res > 0) {
- p += CILEN_DEFLATE;
- break;
- }
- if (res < 0 || go->deflate_size <= DEFLATE_MIN_WORKS) {
- go->deflate = 0;
- break;
- }
- --go->deflate_size;
- p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
- }
- if (p != p0 && go->deflate_correct && go->deflate_draft) {
- p[0] = CI_DEFLATE_DRAFT;
- p[1] = CILEN_DEFLATE;
- p[2] = p[2 - CILEN_DEFLATE];
- p[3] = DEFLATE_CHK_SEQUENCE;
- p += CILEN_DEFLATE;
- }
- }
- if (go->bsd_compress) {
- p[0] = CI_BSD_COMPRESS;
- p[1] = CILEN_BSD_COMPRESS;
- p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
- if (p != p0) {
- p += CILEN_BSD_COMPRESS; /* not the first option */
- } else {
- for (;;) {
- res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 0);
- if (res > 0) {
- p += CILEN_BSD_COMPRESS;
- break;
- }
- if (res < 0 || go->bsd_bits <= BSD_MIN_BITS) {
- go->bsd_compress = 0;
- break;
- }
- --go->bsd_bits;
- p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
- }
- }
- }
- /* XXX Should Predictor 2 be preferable to Predictor 1? */
- if (go->predictor_1) {
- p[0] = CI_PREDICTOR_1;
- p[1] = CILEN_PREDICTOR_1;
- if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 0) <= 0) {
- go->predictor_1 = 0;
- } else {
- p += CILEN_PREDICTOR_1;
- }
- }
- if (go->predictor_2) {
- p[0] = CI_PREDICTOR_2;
- p[1] = CILEN_PREDICTOR_2;
- if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 0) <= 0) {
- go->predictor_2 = 0;
- } else {
- p += CILEN_PREDICTOR_2;
- }
- }
-
- go->method = (p > p0)? p0[0]: -1;
-
- *lenp = p - p0;
-}
-
-/*
- * ccp_ackci - process a received configure-ack, and return
- * 1 iff the packet was OK.
- */
-static int
-ccp_ackci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- ccp_options *go = &ccp_gotoptions[f->unit];
- u_char *p0 = p;
-
- if (go->deflate) {
- if (len < CILEN_DEFLATE
- || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
- || p[1] != CILEN_DEFLATE
- || p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
- || p[3] != DEFLATE_CHK_SEQUENCE)
- return 0;
- p += CILEN_DEFLATE;
- len -= CILEN_DEFLATE;
- /* XXX Cope with first/fast ack */
- if (len == 0)
- return 1;
- if (go->deflate_correct && go->deflate_draft) {
- if (len < CILEN_DEFLATE
- || p[0] != CI_DEFLATE_DRAFT
- || p[1] != CILEN_DEFLATE
- || p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
- || p[3] != DEFLATE_CHK_SEQUENCE)
- return 0;
- p += CILEN_DEFLATE;
- len -= CILEN_DEFLATE;
- }
- }
- if (go->bsd_compress) {
- if (len < CILEN_BSD_COMPRESS
- || p[0] != CI_BSD_COMPRESS || p[1] != CILEN_BSD_COMPRESS
- || p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
- return 0;
- p += CILEN_BSD_COMPRESS;
- len -= CILEN_BSD_COMPRESS;
- /* XXX Cope with first/fast ack */
- if (p == p0 && len == 0)
- return 1;
- }
- if (go->predictor_1) {
- if (len < CILEN_PREDICTOR_1
- || p[0] != CI_PREDICTOR_1 || p[1] != CILEN_PREDICTOR_1)
- return 0;
- p += CILEN_PREDICTOR_1;
- len -= CILEN_PREDICTOR_1;
- /* XXX Cope with first/fast ack */
- if (p == p0 && len == 0)
- return 1;
- }
- if (go->predictor_2) {
- if (len < CILEN_PREDICTOR_2
- || p[0] != CI_PREDICTOR_2 || p[1] != CILEN_PREDICTOR_2)
- return 0;
- p += CILEN_PREDICTOR_2;
- len -= CILEN_PREDICTOR_2;
- /* XXX Cope with first/fast ack */
- if (p == p0 && len == 0)
- return 1;
- }
-
- if (len != 0)
- return 0;
- return 1;
-}
-
-/*
- * ccp_nakci - process received configure-nak.
- * Returns 1 iff the nak was OK.
- */
-static int
-ccp_nakci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- ccp_options *go = &ccp_gotoptions[f->unit];
- ccp_options no; /* options we've seen already */
- ccp_options try; /* options to ask for next time */
-
- memset(&no, 0, sizeof(no));
- try = *go;
-
- if (go->deflate && len >= CILEN_DEFLATE
- && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
- && p[1] == CILEN_DEFLATE) {
- no.deflate = 1;
- /*
- * Peer wants us to use a different code size or something.
- * Stop asking for Deflate if we don't understand his suggestion.
- */
- if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
- || DEFLATE_SIZE(p[2]) < DEFLATE_MIN_WORKS
- || p[3] != DEFLATE_CHK_SEQUENCE)
- try.deflate = 0;
- else if (DEFLATE_SIZE(p[2]) < go->deflate_size)
- try.deflate_size = DEFLATE_SIZE(p[2]);
- p += CILEN_DEFLATE;
- len -= CILEN_DEFLATE;
- if (go->deflate_correct && go->deflate_draft
- && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT
- && p[1] == CILEN_DEFLATE) {
- p += CILEN_DEFLATE;
- len -= CILEN_DEFLATE;
- }
- }
-
- if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
- && p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
- no.bsd_compress = 1;
- /*
- * Peer wants us to use a different number of bits
- * or a different version.
- */
- if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION)
- try.bsd_compress = 0;
- else if (BSD_NBITS(p[2]) < go->bsd_bits)
- try.bsd_bits = BSD_NBITS(p[2]);
- p += CILEN_BSD_COMPRESS;
- len -= CILEN_BSD_COMPRESS;
- }
-
- /*
- * Predictor-1 and 2 have no options, so they can't be Naked.
- *
- * There may be remaining options but we ignore them.
- */
-
- if (f->state != OPENED)
- *go = try;
- return 1;
-}
-
-/*
- * ccp_rejci - reject some of our suggested compression methods.
- */
-static int
-ccp_rejci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- ccp_options *go = &ccp_gotoptions[f->unit];
- ccp_options try; /* options to request next time */
-
- try = *go;
-
- /*
- * Cope with empty configure-rejects by ceasing to send
- * configure-requests.
- */
- if (len == 0 && all_rejected[f->unit])
- return -1;
-
- if (go->deflate && len >= CILEN_DEFLATE
- && p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
- && p[1] == CILEN_DEFLATE) {
- if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
- || p[3] != DEFLATE_CHK_SEQUENCE)
- return 0; /* Rej is bad */
- if (go->deflate_correct)
- try.deflate_correct = 0;
- else
- try.deflate_draft = 0;
- p += CILEN_DEFLATE;
- len -= CILEN_DEFLATE;
- if (go->deflate_correct && go->deflate_draft
- && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT
- && p[1] == CILEN_DEFLATE) {
- if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
- || p[3] != DEFLATE_CHK_SEQUENCE)
- return 0; /* Rej is bad */
- try.deflate_draft = 0;
- p += CILEN_DEFLATE;
- len -= CILEN_DEFLATE;
- }
- if (!try.deflate_correct && !try.deflate_draft)
- try.deflate = 0;
- }
- if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
- && p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
- if (p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
- return 0;
- try.bsd_compress = 0;
- p += CILEN_BSD_COMPRESS;
- len -= CILEN_BSD_COMPRESS;
- }
- if (go->predictor_1 && len >= CILEN_PREDICTOR_1
- && p[0] == CI_PREDICTOR_1 && p[1] == CILEN_PREDICTOR_1) {
- try.predictor_1 = 0;
- p += CILEN_PREDICTOR_1;
- len -= CILEN_PREDICTOR_1;
- }
- if (go->predictor_2 && len >= CILEN_PREDICTOR_2
- && p[0] == CI_PREDICTOR_2 && p[1] == CILEN_PREDICTOR_2) {
- try.predictor_2 = 0;
- p += CILEN_PREDICTOR_2;
- len -= CILEN_PREDICTOR_2;
- }
-
- if (len != 0)
- return 0;
-
- if (f->state != OPENED)
- *go = try;
-
- return 1;
-}
-
-/*
- * ccp_reqci - processed a received configure-request.
- * Returns CONFACK, CONFNAK or CONFREJ and the packet modified
- * appropriately.
- */
-static int
-ccp_reqci(f, p, lenp, dont_nak)
- fsm *f;
- u_char *p;
- int *lenp;
- int dont_nak;
-{
- int ret, newret, res;
- u_char *p0, *retp;
- int len, clen, type, nb;
- ccp_options *ho = &ccp_hisoptions[f->unit];
- ccp_options *ao = &ccp_allowoptions[f->unit];
-
- ret = CONFACK;
- retp = p0 = p;
- len = *lenp;
-
- memset(ho, 0, sizeof(ccp_options));
- ho->method = (len > 0)? p[0]: -1;
-
- while (len > 0) {
- newret = CONFACK;
- if (len < 2 || p[1] < 2 || p[1] > len) {
- /* length is bad */
- clen = len;
- newret = CONFREJ;
-
- } else {
- type = p[0];
- clen = p[1];
-
- switch (type) {
- case CI_DEFLATE:
- case CI_DEFLATE_DRAFT:
- if (!ao->deflate || clen != CILEN_DEFLATE
- || (!ao->deflate_correct && type == CI_DEFLATE)
- || (!ao->deflate_draft && type == CI_DEFLATE_DRAFT)) {
- newret = CONFREJ;
- break;
- }
-
- ho->deflate = 1;
- ho->deflate_size = nb = DEFLATE_SIZE(p[2]);
- if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
- || p[3] != DEFLATE_CHK_SEQUENCE
- || nb > ao->deflate_size || nb < DEFLATE_MIN_WORKS) {
- newret = CONFNAK;
- if (!dont_nak) {
- p[2] = DEFLATE_MAKE_OPT(ao->deflate_size);
- p[3] = DEFLATE_CHK_SEQUENCE;
- /* fall through to test this #bits below */
- } else
- break;
- }
-
- /*
- * Check whether we can do Deflate with the window
- * size they want. If the window is too big, reduce
- * it until the kernel can cope and nak with that.
- * We only check this for the first option.
- */
- if (p == p0) {
- for (;;) {
- res = ccp_test(f->unit, p, CILEN_DEFLATE, 1);
- if (res > 0)
- break; /* it's OK now */
- if (res < 0 || nb == DEFLATE_MIN_WORKS || dont_nak) {
- newret = CONFREJ;
- p[2] = DEFLATE_MAKE_OPT(ho->deflate_size);
- break;
- }
- newret = CONFNAK;
- --nb;
- p[2] = DEFLATE_MAKE_OPT(nb);
- }
- }
- break;
-
- case CI_BSD_COMPRESS:
- if (!ao->bsd_compress || clen != CILEN_BSD_COMPRESS) {
- newret = CONFREJ;
- break;
- }
-
- ho->bsd_compress = 1;
- ho->bsd_bits = nb = BSD_NBITS(p[2]);
- if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION
- || nb > ao->bsd_bits || nb < BSD_MIN_BITS) {
- newret = CONFNAK;
- if (!dont_nak) {
- p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, ao->bsd_bits);
- /* fall through to test this #bits below */
- } else
- break;
- }
-
- /*
- * Check whether we can do BSD-Compress with the code
- * size they want. If the code size is too big, reduce
- * it until the kernel can cope and nak with that.
- * We only check this for the first option.
- */
- if (p == p0) {
- for (;;) {
- res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 1);
- if (res > 0)
- break;
- if (res < 0 || nb == BSD_MIN_BITS || dont_nak) {
- newret = CONFREJ;
- p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION,
- ho->bsd_bits);
- break;
- }
- newret = CONFNAK;
- --nb;
- p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, nb);
- }
- }
- break;
-
- case CI_PREDICTOR_1:
- if (!ao->predictor_1 || clen != CILEN_PREDICTOR_1) {
- newret = CONFREJ;
- break;
- }
-
- ho->predictor_1 = 1;
- if (p == p0
- && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 1) <= 0) {
- newret = CONFREJ;
- }
- break;
-
- case CI_PREDICTOR_2:
- if (!ao->predictor_2 || clen != CILEN_PREDICTOR_2) {
- newret = CONFREJ;
- break;
- }
-
- ho->predictor_2 = 1;
- if (p == p0
- && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 1) <= 0) {
- newret = CONFREJ;
- }
- break;
-
- default:
- newret = CONFREJ;
- }
- }
-
- if (newret == CONFNAK && dont_nak)
- newret = CONFREJ;
- if (!(newret == CONFACK || (newret == CONFNAK && ret == CONFREJ))) {
- /* we're returning this option */
- if (newret == CONFREJ && ret == CONFNAK)
- retp = p0;
- ret = newret;
- if (p != retp)
- BCOPY(p, retp, clen);
- retp += clen;
- }
-
- p += clen;
- len -= clen;
- }
-
- if (ret != CONFACK) {
- if (ret == CONFREJ && *lenp == retp - p0)
- all_rejected[f->unit] = 1;
- else
- *lenp = retp - p0;
- }
- return ret;
-}
-
-/*
- * Make a string name for a compression method (or 2).
- */
-static char *
-method_name(opt, opt2)
- ccp_options *opt, *opt2;
-{
- static char result[64];
-
- if (!ANY_COMPRESS(*opt))
- return "(none)";
- switch (opt->method) {
- case CI_DEFLATE:
- case CI_DEFLATE_DRAFT:
- if (opt2 != NULL && opt2->deflate_size != opt->deflate_size)
- slprintf(result, sizeof(result), "Deflate%s (%d/%d)",
- (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
- opt->deflate_size, opt2->deflate_size);
- else
- slprintf(result, sizeof(result), "Deflate%s (%d)",
- (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
- opt->deflate_size);
- break;
- case CI_BSD_COMPRESS:
- if (opt2 != NULL && opt2->bsd_bits != opt->bsd_bits)
- slprintf(result, sizeof(result), "BSD-Compress (%d/%d)",
- opt->bsd_bits, opt2->bsd_bits);
- else
- slprintf(result, sizeof(result), "BSD-Compress (%d)",
- opt->bsd_bits);
- break;
- case CI_PREDICTOR_1:
- return "Predictor 1";
- case CI_PREDICTOR_2:
- return "Predictor 2";
- default:
- slprintf(result, sizeof(result), "Method %d", opt->method);
- }
- return result;
-}
-
-/*
- * CCP has come up - inform the kernel driver and log a message.
- */
-static void
-ccp_up(f)
- fsm *f;
-{
- ccp_options *go = &ccp_gotoptions[f->unit];
- ccp_options *ho = &ccp_hisoptions[f->unit];
- char method1[64];
-
- ccp_flags_set(f->unit, 1, 1);
- if (ANY_COMPRESS(*go)) {
- if (ANY_COMPRESS(*ho)) {
- if (go->method == ho->method) {
- notice("%s compression enabled", method_name(go, ho));
- } else {
- strlcpy(method1, method_name(go, NULL), sizeof(method1));
- notice("%s / %s compression enabled",
- method1, method_name(ho, NULL));
- }
- } else
- notice("%s receive compression enabled", method_name(go, NULL));
- } else if (ANY_COMPRESS(*ho))
- notice("%s transmit compression enabled", method_name(ho, NULL));
-}
-
-/*
- * CCP has gone down - inform the kernel driver.
- */
-static void
-ccp_down(f)
- fsm *f;
-{
- if (ccp_localstate[f->unit] & RACK_PENDING)
- UNTIMEOUT(ccp_rack_timeout, f);
- ccp_localstate[f->unit] = 0;
- ccp_flags_set(f->unit, 1, 0);
-}
-
-/*
- * Print the contents of a CCP packet.
- */
-static char *ccp_codenames[] = {
- "ConfReq", "ConfAck", "ConfNak", "ConfRej",
- "TermReq", "TermAck", "CodeRej",
- NULL, NULL, NULL, NULL, NULL, NULL,
- "ResetReq", "ResetAck",
-};
-
-static int
-ccp_printpkt(p, plen, printer, arg)
- u_char *p;
- int plen;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- u_char *p0, *optend;
- int code, id, len;
- int optlen;
-
- p0 = p;
- if (plen < HEADERLEN)
- return 0;
- code = p[0];
- id = p[1];
- len = (p[2] << 8) + p[3];
- if (len < HEADERLEN || len > plen)
- return 0;
-
- if (code >= 1 && code <= sizeof(ccp_codenames) / sizeof(char *)
- && ccp_codenames[code-1] != NULL)
- printer(arg, " %s", ccp_codenames[code-1]);
- else
- printer(arg, " code=0x%x", code);
- printer(arg, " id=0x%x", id);
- len -= HEADERLEN;
- p += HEADERLEN;
-
- switch (code) {
- case CONFREQ:
- case CONFACK:
- case CONFNAK:
- case CONFREJ:
- /* print list of possible compression methods */
- while (len >= 2) {
- code = p[0];
- optlen = p[1];
- if (optlen < 2 || optlen > len)
- break;
- printer(arg, " <");
- len -= optlen;
- optend = p + optlen;
- switch (code) {
- case CI_DEFLATE:
- case CI_DEFLATE_DRAFT:
- if (optlen >= CILEN_DEFLATE) {
- printer(arg, "deflate%s %d",
- (code == CI_DEFLATE_DRAFT? "(old#)": ""),
- DEFLATE_SIZE(p[2]));
- if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL)
- printer(arg, " method %d", DEFLATE_METHOD(p[2]));
- if (p[3] != DEFLATE_CHK_SEQUENCE)
- printer(arg, " check %d", p[3]);
- p += CILEN_DEFLATE;
- }
- break;
- case CI_BSD_COMPRESS:
- if (optlen >= CILEN_BSD_COMPRESS) {
- printer(arg, "bsd v%d %d", BSD_VERSION(p[2]),
- BSD_NBITS(p[2]));
- p += CILEN_BSD_COMPRESS;
- }
- break;
- case CI_PREDICTOR_1:
- if (optlen >= CILEN_PREDICTOR_1) {
- printer(arg, "predictor 1");
- p += CILEN_PREDICTOR_1;
- }
- break;
- case CI_PREDICTOR_2:
- if (optlen >= CILEN_PREDICTOR_2) {
- printer(arg, "predictor 2");
- p += CILEN_PREDICTOR_2;
- }
- break;
- }
- while (p < optend)
- printer(arg, " %.2x", *p++);
- printer(arg, ">");
- }
- break;
-
- case TERMACK:
- case TERMREQ:
- if (len > 0 && *p >= ' ' && *p < 0x7f) {
- print_string((char *)p, len, printer, arg);
- p += len;
- len = 0;
- }
- break;
- }
-
- /* dump out the rest of the packet in hex */
- while (--len >= 0)
- printer(arg, " %.2x", *p++);
-
- return p - p0;
-}
-
-/*
- * We have received a packet that the decompressor failed to
- * decompress. Here we would expect to issue a reset-request, but
- * Motorola has a patent on resetting the compressor as a result of
- * detecting an error in the decompressed data after decompression.
- * (See US patent 5,130,993; international patent publication number
- * WO 91/10289; Australian patent 73296/91.)
- *
- * So we ask the kernel whether the error was detected after
- * decompression; if it was, we take CCP down, thus disabling
- * compression :-(, otherwise we issue the reset-request.
- */
-static void
-ccp_datainput(unit, pkt, len)
- int unit;
- u_char *pkt;
- int len;
-{
- fsm *f;
-
- f = &ccp_fsm[unit];
- if (f->state == OPENED) {
- if (ccp_fatal_error(unit)) {
- /*
- * Disable compression by taking CCP down.
- */
- error("Lost compression sync: disabling compression");
- ccp_close(unit, "Lost compression sync");
- } else {
- /*
- * Send a reset-request to reset the peer's compressor.
- * We don't do that if we are still waiting for an
- * acknowledgement to a previous reset-request.
- */
- if (!(ccp_localstate[f->unit] & RACK_PENDING)) {
- fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0);
- TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
- ccp_localstate[f->unit] |= RACK_PENDING;
- } else
- ccp_localstate[f->unit] |= RREQ_REPEAT;
- }
- }
-}
-
-/*
- * Timeout waiting for reset-ack.
- */
-static void
-ccp_rack_timeout(arg)
- void *arg;
-{
- fsm *f = arg;
-
- if (f->state == OPENED && ccp_localstate[f->unit] & RREQ_REPEAT) {
- fsm_sdata(f, CCP_RESETREQ, f->reqid, NULL, 0);
- TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
- ccp_localstate[f->unit] &= ~RREQ_REPEAT;
- } else
- ccp_localstate[f->unit] &= ~RACK_PENDING;
-}
-
diff --git a/mdk-stage1/ppp/pppd/ccp.h b/mdk-stage1/ppp/pppd/ccp.h
deleted file mode 100644
index 609d858c5..000000000
--- a/mdk-stage1/ppp/pppd/ccp.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * ccp.h - Definitions for PPP Compression Control Protocol.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-typedef struct ccp_options {
- bool bsd_compress; /* do BSD Compress? */
- bool deflate; /* do Deflate? */
- bool predictor_1; /* do Predictor-1? */
- bool predictor_2; /* do Predictor-2? */
- bool deflate_correct; /* use correct code for deflate? */
- bool deflate_draft; /* use draft RFC code for deflate? */
- u_short bsd_bits; /* # bits/code for BSD Compress */
- u_short deflate_size; /* lg(window size) for Deflate */
- short method; /* code for chosen compression method */
-} ccp_options;
-
-extern fsm ccp_fsm[];
-extern ccp_options ccp_wantoptions[];
-extern ccp_options ccp_gotoptions[];
-extern ccp_options ccp_allowoptions[];
-extern ccp_options ccp_hisoptions[];
-
-extern struct protent ccp_protent;
diff --git a/mdk-stage1/ppp/pppd/chap.c b/mdk-stage1/ppp/pppd/chap.c
deleted file mode 100644
index 54c0e0095..000000000
--- a/mdk-stage1/ppp/pppd/chap.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * chap.c - Challenge Handshake Authentication Protocol.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University. The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Copyright (c) 1991 Gregory M. Christy.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Gregory M. Christy. The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-#include "pppd.h"
-#include "chap.h"
-#include "md5.h"
-#ifdef CHAPMS
-#include "chap_ms.h"
-#endif
-
-static const char rcsid[] = RCSID;
-
-/*
- * Command-line options.
- */
-static option_t chap_option_list[] = {
- { "chap-restart", o_int, &chap[0].timeouttime,
- "Set timeout for CHAP", OPT_PRIO },
- { "chap-max-challenge", o_int, &chap[0].max_transmits,
- "Set max #xmits for challenge", OPT_PRIO },
- { "chap-interval", o_int, &chap[0].chal_interval,
- "Set interval for rechallenge", OPT_PRIO },
-#ifdef MSLANMAN
- { "ms-lanman", o_bool, &ms_lanman,
- "Use LanMan passwd when using MS-CHAP", 1 },
-#endif
- { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-static void ChapInit __P((int));
-static void ChapLowerUp __P((int));
-static void ChapLowerDown __P((int));
-static void ChapInput __P((int, u_char *, int));
-static void ChapProtocolReject __P((int));
-static int ChapPrintPkt __P((u_char *, int,
- void (*) __P((void *, char *, ...)), void *));
-
-struct protent chap_protent = {
- PPP_CHAP,
- ChapInit,
- ChapInput,
- ChapProtocolReject,
- ChapLowerUp,
- ChapLowerDown,
- NULL,
- NULL,
- ChapPrintPkt,
- NULL,
- 1,
- "CHAP",
- NULL,
- chap_option_list,
- NULL,
- NULL,
- NULL
-};
-
-chap_state chap[NUM_PPP]; /* CHAP state; one for each unit */
-
-static void ChapChallengeTimeout __P((void *));
-static void ChapResponseTimeout __P((void *));
-static void ChapReceiveChallenge __P((chap_state *, u_char *, int, int));
-static void ChapRechallenge __P((void *));
-static void ChapReceiveResponse __P((chap_state *, u_char *, int, int));
-static void ChapReceiveSuccess __P((chap_state *, u_char *, int, int));
-static void ChapReceiveFailure __P((chap_state *, u_char *, int, int));
-static void ChapSendStatus __P((chap_state *, int));
-static void ChapSendChallenge __P((chap_state *));
-static void ChapSendResponse __P((chap_state *));
-static void ChapGenChallenge __P((chap_state *));
-
-extern double drand48 __P((void));
-extern void srand48 __P((long));
-
-/*
- * ChapInit - Initialize a CHAP unit.
- */
-static void
-ChapInit(unit)
- int unit;
-{
- chap_state *cstate = &chap[unit];
-
- BZERO(cstate, sizeof(*cstate));
- cstate->unit = unit;
- cstate->clientstate = CHAPCS_INITIAL;
- cstate->serverstate = CHAPSS_INITIAL;
- cstate->timeouttime = CHAP_DEFTIMEOUT;
- cstate->max_transmits = CHAP_DEFTRANSMITS;
- /* random number generator is initialized in magic_init */
-}
-
-
-/*
- * ChapAuthWithPeer - Authenticate us with our peer (start client).
- *
- */
-void
-ChapAuthWithPeer(unit, our_name, digest)
- int unit;
- char *our_name;
- int digest;
-{
- chap_state *cstate = &chap[unit];
-
- cstate->resp_name = our_name;
- cstate->resp_type = digest;
-
- if (cstate->clientstate == CHAPCS_INITIAL ||
- cstate->clientstate == CHAPCS_PENDING) {
- /* lower layer isn't up - wait until later */
- cstate->clientstate = CHAPCS_PENDING;
- return;
- }
-
- /*
- * We get here as a result of LCP coming up.
- * So even if CHAP was open before, we will
- * have to re-authenticate ourselves.
- */
- cstate->clientstate = CHAPCS_LISTEN;
-}
-
-
-/*
- * ChapAuthPeer - Authenticate our peer (start server).
- */
-void
-ChapAuthPeer(unit, our_name, digest)
- int unit;
- char *our_name;
- int digest;
-{
- chap_state *cstate = &chap[unit];
-
- cstate->chal_name = our_name;
- cstate->chal_type = digest;
-
- if (cstate->serverstate == CHAPSS_INITIAL ||
- cstate->serverstate == CHAPSS_PENDING) {
- /* lower layer isn't up - wait until later */
- cstate->serverstate = CHAPSS_PENDING;
- return;
- }
-
- ChapGenChallenge(cstate);
- ChapSendChallenge(cstate); /* crank it up dude! */
- cstate->serverstate = CHAPSS_INITIAL_CHAL;
-}
-
-
-/*
- * ChapChallengeTimeout - Timeout expired on sending challenge.
- */
-static void
-ChapChallengeTimeout(arg)
- void *arg;
-{
- chap_state *cstate = (chap_state *) arg;
-
- /* if we aren't sending challenges, don't worry. then again we */
- /* probably shouldn't be here either */
- if (cstate->serverstate != CHAPSS_INITIAL_CHAL &&
- cstate->serverstate != CHAPSS_RECHALLENGE)
- return;
-
- if (cstate->chal_transmits >= cstate->max_transmits) {
- /* give up on peer */
- error("Peer failed to respond to CHAP challenge");
- cstate->serverstate = CHAPSS_BADAUTH;
- auth_peer_fail(cstate->unit, PPP_CHAP);
- return;
- }
-
- ChapSendChallenge(cstate); /* Re-send challenge */
-}
-
-
-/*
- * ChapResponseTimeout - Timeout expired on sending response.
- */
-static void
-ChapResponseTimeout(arg)
- void *arg;
-{
- chap_state *cstate = (chap_state *) arg;
-
- /* if we aren't sending a response, don't worry. */
- if (cstate->clientstate != CHAPCS_RESPONSE)
- return;
-
- ChapSendResponse(cstate); /* re-send response */
-}
-
-
-/*
- * ChapRechallenge - Time to challenge the peer again.
- */
-static void
-ChapRechallenge(arg)
- void *arg;
-{
- chap_state *cstate = (chap_state *) arg;
-
- /* if we aren't sending a response, don't worry. */
- if (cstate->serverstate != CHAPSS_OPEN)
- return;
-
- ChapGenChallenge(cstate);
- ChapSendChallenge(cstate);
- cstate->serverstate = CHAPSS_RECHALLENGE;
-}
-
-
-/*
- * ChapLowerUp - The lower layer is up.
- *
- * Start up if we have pending requests.
- */
-static void
-ChapLowerUp(unit)
- int unit;
-{
- chap_state *cstate = &chap[unit];
-
- if (cstate->clientstate == CHAPCS_INITIAL)
- cstate->clientstate = CHAPCS_CLOSED;
- else if (cstate->clientstate == CHAPCS_PENDING)
- cstate->clientstate = CHAPCS_LISTEN;
-
- if (cstate->serverstate == CHAPSS_INITIAL)
- cstate->serverstate = CHAPSS_CLOSED;
- else if (cstate->serverstate == CHAPSS_PENDING) {
- ChapGenChallenge(cstate);
- ChapSendChallenge(cstate);
- cstate->serverstate = CHAPSS_INITIAL_CHAL;
- }
-}
-
-
-/*
- * ChapLowerDown - The lower layer is down.
- *
- * Cancel all timeouts.
- */
-static void
-ChapLowerDown(unit)
- int unit;
-{
- chap_state *cstate = &chap[unit];
-
- /* Timeout(s) pending? Cancel if so. */
- if (cstate->serverstate == CHAPSS_INITIAL_CHAL ||
- cstate->serverstate == CHAPSS_RECHALLENGE)
- UNTIMEOUT(ChapChallengeTimeout, cstate);
- else if (cstate->serverstate == CHAPSS_OPEN
- && cstate->chal_interval != 0)
- UNTIMEOUT(ChapRechallenge, cstate);
- if (cstate->clientstate == CHAPCS_RESPONSE)
- UNTIMEOUT(ChapResponseTimeout, cstate);
-
- cstate->clientstate = CHAPCS_INITIAL;
- cstate->serverstate = CHAPSS_INITIAL;
-}
-
-
-/*
- * ChapProtocolReject - Peer doesn't grok CHAP.
- */
-static void
-ChapProtocolReject(unit)
- int unit;
-{
- chap_state *cstate = &chap[unit];
-
- if (cstate->serverstate != CHAPSS_INITIAL &&
- cstate->serverstate != CHAPSS_CLOSED)
- auth_peer_fail(unit, PPP_CHAP);
- if (cstate->clientstate != CHAPCS_INITIAL &&
- cstate->clientstate != CHAPCS_CLOSED)
- auth_withpeer_fail(unit, PPP_CHAP);
- ChapLowerDown(unit); /* shutdown chap */
-}
-
-
-/*
- * ChapInput - Input CHAP packet.
- */
-static void
-ChapInput(unit, inpacket, packet_len)
- int unit;
- u_char *inpacket;
- int packet_len;
-{
- chap_state *cstate = &chap[unit];
- u_char *inp;
- u_char code, id;
- int len;
-
- /*
- * Parse header (code, id and length).
- * If packet too short, drop it.
- */
- inp = inpacket;
- if (packet_len < CHAP_HEADERLEN) {
- CHAPDEBUG(("ChapInput: rcvd short header."));
- return;
- }
- GETCHAR(code, inp);
- GETCHAR(id, inp);
- GETSHORT(len, inp);
- if (len < CHAP_HEADERLEN) {
- CHAPDEBUG(("ChapInput: rcvd illegal length."));
- return;
- }
- if (len > packet_len) {
- CHAPDEBUG(("ChapInput: rcvd short packet."));
- return;
- }
- len -= CHAP_HEADERLEN;
-
- /*
- * Action depends on code (as in fact it usually does :-).
- */
- switch (code) {
- case CHAP_CHALLENGE:
- ChapReceiveChallenge(cstate, inp, id, len);
- break;
-
- case CHAP_RESPONSE:
- ChapReceiveResponse(cstate, inp, id, len);
- break;
-
- case CHAP_FAILURE:
- ChapReceiveFailure(cstate, inp, id, len);
- break;
-
- case CHAP_SUCCESS:
- ChapReceiveSuccess(cstate, inp, id, len);
- break;
-
- default: /* Need code reject? */
- warn("Unknown CHAP code (%d) received.", code);
- break;
- }
-}
-
-
-/*
- * ChapReceiveChallenge - Receive Challenge and send Response.
- */
-static void
-ChapReceiveChallenge(cstate, inp, id, len)
- chap_state *cstate;
- u_char *inp;
- int id;
- int len;
-{
- int rchallenge_len;
- u_char *rchallenge;
- int secret_len;
- char secret[MAXSECRETLEN];
- char rhostname[256];
- MD5_CTX mdContext;
- u_char hash[MD5_SIGNATURE_SIZE];
-
- if (cstate->clientstate == CHAPCS_CLOSED ||
- cstate->clientstate == CHAPCS_PENDING) {
- CHAPDEBUG(("ChapReceiveChallenge: in state %d", cstate->clientstate));
- return;
- }
-
- if (len < 2) {
- CHAPDEBUG(("ChapReceiveChallenge: rcvd short packet."));
- return;
- }
-
- GETCHAR(rchallenge_len, inp);
- len -= sizeof (u_char) + rchallenge_len; /* now name field length */
- if (len < 0) {
- CHAPDEBUG(("ChapReceiveChallenge: rcvd short packet."));
- return;
- }
- rchallenge = inp;
- INCPTR(rchallenge_len, inp);
-
- if (len >= sizeof(rhostname))
- len = sizeof(rhostname) - 1;
- BCOPY(inp, rhostname, len);
- rhostname[len] = '\000';
-
- /* Microsoft doesn't send their name back in the PPP packet */
- if (explicit_remote || (remote_name[0] != 0 && rhostname[0] == 0)) {
- strlcpy(rhostname, remote_name, sizeof(rhostname));
- CHAPDEBUG(("ChapReceiveChallenge: using '%q' as remote name",
- rhostname));
- }
-
- /* get secret for authenticating ourselves with the specified host */
- if (!get_secret(cstate->unit, cstate->resp_name, rhostname,
- secret, &secret_len, 0)) {
- secret_len = 0; /* assume null secret if can't find one */
- warn("No CHAP secret found for authenticating us to %q", rhostname);
- }
-
- /* cancel response send timeout if necessary */
- if (cstate->clientstate == CHAPCS_RESPONSE)
- UNTIMEOUT(ChapResponseTimeout, cstate);
-
- cstate->resp_id = id;
- cstate->resp_transmits = 0;
-
- /* generate MD based on negotiated type */
- switch (cstate->resp_type) {
-
- case CHAP_DIGEST_MD5:
- MD5Init(&mdContext);
- MD5Update(&mdContext, &cstate->resp_id, 1);
- MD5Update(&mdContext, secret, secret_len);
- MD5Update(&mdContext, rchallenge, rchallenge_len);
- MD5Final(hash, &mdContext);
- BCOPY(hash, cstate->response, MD5_SIGNATURE_SIZE);
- cstate->resp_length = MD5_SIGNATURE_SIZE;
- break;
-
-#ifdef CHAPMS
- case CHAP_MICROSOFT:
- ChapMS(cstate, rchallenge, rchallenge_len, secret, secret_len);
- break;
-#endif
-
- default:
- CHAPDEBUG(("unknown digest type %d", cstate->resp_type));
- return;
- }
-
- BZERO(secret, sizeof(secret));
- ChapSendResponse(cstate);
-}
-
-
-/*
- * ChapReceiveResponse - Receive and process response.
- */
-static void
-ChapReceiveResponse(cstate, inp, id, len)
- chap_state *cstate;
- u_char *inp;
- int id;
- int len;
-{
- u_char *remmd, remmd_len;
- int secret_len, old_state;
- int code;
- char rhostname[256];
- MD5_CTX mdContext;
- char secret[MAXSECRETLEN];
- u_char hash[MD5_SIGNATURE_SIZE];
-
- if (cstate->serverstate == CHAPSS_CLOSED ||
- cstate->serverstate == CHAPSS_PENDING) {
- CHAPDEBUG(("ChapReceiveResponse: in state %d", cstate->serverstate));
- return;
- }
-
- if (id != cstate->chal_id)
- return; /* doesn't match ID of last challenge */
-
- /*
- * If we have received a duplicate or bogus Response,
- * we have to send the same answer (Success/Failure)
- * as we did for the first Response we saw.
- */
- if (cstate->serverstate == CHAPSS_OPEN) {
- ChapSendStatus(cstate, CHAP_SUCCESS);
- return;
- }
- if (cstate->serverstate == CHAPSS_BADAUTH) {
- ChapSendStatus(cstate, CHAP_FAILURE);
- return;
- }
-
- if (len < 2) {
- CHAPDEBUG(("ChapReceiveResponse: rcvd short packet."));
- return;
- }
- GETCHAR(remmd_len, inp); /* get length of MD */
- remmd = inp; /* get pointer to MD */
- INCPTR(remmd_len, inp);
-
- len -= sizeof (u_char) + remmd_len;
- if (len < 0) {
- CHAPDEBUG(("ChapReceiveResponse: rcvd short packet."));
- return;
- }
-
- UNTIMEOUT(ChapChallengeTimeout, cstate);
-
- if (len >= sizeof(rhostname))
- len = sizeof(rhostname) - 1;
- BCOPY(inp, rhostname, len);
- rhostname[len] = '\000';
-
- /*
- * Get secret for authenticating them with us,
- * do the hash ourselves, and compare the result.
- */
- code = CHAP_FAILURE;
- if (!get_secret(cstate->unit, (explicit_remote? remote_name: rhostname),
- cstate->chal_name, secret, &secret_len, 1)) {
- warn("No CHAP secret found for authenticating %q", rhostname);
- } else {
-
- /* generate MD based on negotiated type */
- switch (cstate->chal_type) {
-
- case CHAP_DIGEST_MD5: /* only MD5 is defined for now */
- if (remmd_len != MD5_SIGNATURE_SIZE)
- break; /* it's not even the right length */
- MD5Init(&mdContext);
- MD5Update(&mdContext, &cstate->chal_id, 1);
- MD5Update(&mdContext, secret, secret_len);
- MD5Update(&mdContext, cstate->challenge, cstate->chal_len);
- MD5Final(hash, &mdContext);
-
- /* compare local and remote MDs and send the appropriate status */
- if (memcmp (hash, remmd, MD5_SIGNATURE_SIZE) == 0)
- code = CHAP_SUCCESS; /* they are the same! */
- break;
-
- default:
- CHAPDEBUG(("unknown digest type %d", cstate->chal_type));
- }
- }
-
- BZERO(secret, sizeof(secret));
- ChapSendStatus(cstate, code);
-
- if (code == CHAP_SUCCESS) {
- old_state = cstate->serverstate;
- cstate->serverstate = CHAPSS_OPEN;
- if (old_state == CHAPSS_INITIAL_CHAL) {
- auth_peer_success(cstate->unit, PPP_CHAP, rhostname, len);
- }
- if (cstate->chal_interval != 0)
- TIMEOUT(ChapRechallenge, cstate, cstate->chal_interval);
- notice("CHAP peer authentication succeeded for %q", rhostname);
-
- } else {
- error("CHAP peer authentication failed for remote host %q", rhostname);
- cstate->serverstate = CHAPSS_BADAUTH;
- auth_peer_fail(cstate->unit, PPP_CHAP);
- }
-}
-
-/*
- * ChapReceiveSuccess - Receive Success
- */
-static void
-ChapReceiveSuccess(cstate, inp, id, len)
- chap_state *cstate;
- u_char *inp;
- u_char id;
- int len;
-{
-
- if (cstate->clientstate == CHAPCS_OPEN)
- /* presumably an answer to a duplicate response */
- return;
-
- if (cstate->clientstate != CHAPCS_RESPONSE) {
- /* don't know what this is */
- CHAPDEBUG(("ChapReceiveSuccess: in state %d\n", cstate->clientstate));
- return;
- }
-
- UNTIMEOUT(ChapResponseTimeout, cstate);
-
- /*
- * Print message.
- */
- if (len > 0)
- PRINTMSG(inp, len);
-
- cstate->clientstate = CHAPCS_OPEN;
-
- auth_withpeer_success(cstate->unit, PPP_CHAP);
-}
-
-
-/*
- * ChapReceiveFailure - Receive failure.
- */
-static void
-ChapReceiveFailure(cstate, inp, id, len)
- chap_state *cstate;
- u_char *inp;
- u_char id;
- int len;
-{
- if (cstate->clientstate != CHAPCS_RESPONSE) {
- /* don't know what this is */
- CHAPDEBUG(("ChapReceiveFailure: in state %d\n", cstate->clientstate));
- return;
- }
-
- UNTIMEOUT(ChapResponseTimeout, cstate);
-
- /*
- * Print message.
- */
- if (len > 0)
- PRINTMSG(inp, len);
-
- error("CHAP authentication failed");
- auth_withpeer_fail(cstate->unit, PPP_CHAP);
-}
-
-
-/*
- * ChapSendChallenge - Send an Authenticate challenge.
- */
-static void
-ChapSendChallenge(cstate)
- chap_state *cstate;
-{
- u_char *outp;
- int chal_len, name_len;
- int outlen;
-
- chal_len = cstate->chal_len;
- name_len = strlen(cstate->chal_name);
- outlen = CHAP_HEADERLEN + sizeof (u_char) + chal_len + name_len;
- outp = outpacket_buf;
-
- MAKEHEADER(outp, PPP_CHAP); /* paste in a CHAP header */
-
- PUTCHAR(CHAP_CHALLENGE, outp);
- PUTCHAR(cstate->chal_id, outp);
- PUTSHORT(outlen, outp);
-
- PUTCHAR(chal_len, outp); /* put length of challenge */
- BCOPY(cstate->challenge, outp, chal_len);
- INCPTR(chal_len, outp);
-
- BCOPY(cstate->chal_name, outp, name_len); /* append hostname */
-
- output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
-
- TIMEOUT(ChapChallengeTimeout, cstate, cstate->timeouttime);
- ++cstate->chal_transmits;
-}
-
-
-/*
- * ChapSendStatus - Send a status response (ack or nak).
- */
-static void
-ChapSendStatus(cstate, code)
- chap_state *cstate;
- int code;
-{
- u_char *outp;
- int outlen, msglen;
- char msg[256];
-
- if (code == CHAP_SUCCESS)
- slprintf(msg, sizeof(msg), "Welcome to %s.", hostname);
- else
- slprintf(msg, sizeof(msg), "I don't like you. Go 'way.");
- msglen = strlen(msg);
-
- outlen = CHAP_HEADERLEN + msglen;
- outp = outpacket_buf;
-
- MAKEHEADER(outp, PPP_CHAP); /* paste in a header */
-
- PUTCHAR(code, outp);
- PUTCHAR(cstate->chal_id, outp);
- PUTSHORT(outlen, outp);
- BCOPY(msg, outp, msglen);
- output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
-
-/*
- * ChapGenChallenge is used to generate a pseudo-random challenge string of
- * a pseudo-random length between min_len and max_len. The challenge
- * string and its length are stored in *cstate, and various other fields of
- * *cstate are initialized.
- */
-
-static void
-ChapGenChallenge(cstate)
- chap_state *cstate;
-{
- int chal_len;
- u_char *ptr = cstate->challenge;
- int i;
-
- /* pick a random challenge length between MIN_CHALLENGE_LENGTH and
- MAX_CHALLENGE_LENGTH */
- chal_len = (unsigned) ((drand48() *
- (MAX_CHALLENGE_LENGTH - MIN_CHALLENGE_LENGTH)) +
- MIN_CHALLENGE_LENGTH);
- cstate->chal_len = chal_len;
- cstate->chal_id = ++cstate->id;
- cstate->chal_transmits = 0;
-
- /* generate a random string */
- for (i = 0; i < chal_len; i++)
- *ptr++ = (char) (drand48() * 0xff);
-}
-
-/*
- * ChapSendResponse - send a response packet with values as specified
- * in *cstate.
- */
-/* ARGSUSED */
-static void
-ChapSendResponse(cstate)
- chap_state *cstate;
-{
- u_char *outp;
- int outlen, md_len, name_len;
-
- md_len = cstate->resp_length;
- name_len = strlen(cstate->resp_name);
- outlen = CHAP_HEADERLEN + sizeof (u_char) + md_len + name_len;
- outp = outpacket_buf;
-
- MAKEHEADER(outp, PPP_CHAP);
-
- PUTCHAR(CHAP_RESPONSE, outp); /* we are a response */
- PUTCHAR(cstate->resp_id, outp); /* copy id from challenge packet */
- PUTSHORT(outlen, outp); /* packet length */
-
- PUTCHAR(md_len, outp); /* length of MD */
- BCOPY(cstate->response, outp, md_len); /* copy MD to buffer */
- INCPTR(md_len, outp);
-
- BCOPY(cstate->resp_name, outp, name_len); /* append our name */
-
- /* send the packet */
- output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
-
- cstate->clientstate = CHAPCS_RESPONSE;
- TIMEOUT(ChapResponseTimeout, cstate, cstate->timeouttime);
- ++cstate->resp_transmits;
-}
-
-/*
- * ChapPrintPkt - print the contents of a CHAP packet.
- */
-static char *ChapCodenames[] = {
- "Challenge", "Response", "Success", "Failure"
-};
-
-static int
-ChapPrintPkt(p, plen, printer, arg)
- u_char *p;
- int plen;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int code, id, len;
- int clen, nlen;
- u_char x;
-
- if (plen < CHAP_HEADERLEN)
- return 0;
- GETCHAR(code, p);
- GETCHAR(id, p);
- GETSHORT(len, p);
- if (len < CHAP_HEADERLEN || len > plen)
- return 0;
-
- if (code >= 1 && code <= sizeof(ChapCodenames) / sizeof(char *))
- printer(arg, " %s", ChapCodenames[code-1]);
- else
- printer(arg, " code=0x%x", code);
- printer(arg, " id=0x%x", id);
- len -= CHAP_HEADERLEN;
- switch (code) {
- case CHAP_CHALLENGE:
- case CHAP_RESPONSE:
- if (len < 1)
- break;
- clen = p[0];
- if (len < clen + 1)
- break;
- ++p;
- nlen = len - clen - 1;
- printer(arg, " <");
- for (; clen > 0; --clen) {
- GETCHAR(x, p);
- printer(arg, "%.2x", x);
- }
- printer(arg, ">, name = ");
- print_string((char *)p, nlen, printer, arg);
- break;
- case CHAP_FAILURE:
- case CHAP_SUCCESS:
- printer(arg, " ");
- print_string((char *)p, len, printer, arg);
- break;
- default:
- for (clen = len; clen > 0; --clen) {
- GETCHAR(x, p);
- printer(arg, " %.2x", x);
- }
- }
-
- return len + CHAP_HEADERLEN;
-}
diff --git a/mdk-stage1/ppp/pppd/chap.h b/mdk-stage1/ppp/pppd/chap.h
deleted file mode 100644
index 945d051d0..000000000
--- a/mdk-stage1/ppp/pppd/chap.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * chap.h - Challenge Handshake Authentication Protocol definitions.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University. The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Copyright (c) 1991 Gregory M. Christy
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the author.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-#ifndef __CHAP_INCLUDE__
-
-/* Code + ID + length */
-#define CHAP_HEADERLEN 4
-
-/*
- * CHAP codes.
- */
-
-#define CHAP_DIGEST_MD5 5 /* use MD5 algorithm */
-#define MD5_SIGNATURE_SIZE 16 /* 16 bytes in a MD5 message digest */
-#define CHAP_MICROSOFT 0x80 /* use Microsoft-compatible alg. */
-#define MS_CHAP_RESPONSE_LEN 49 /* Response length for MS-CHAP */
-
-#define CHAP_CHALLENGE 1
-#define CHAP_RESPONSE 2
-#define CHAP_SUCCESS 3
-#define CHAP_FAILURE 4
-
-/*
- * Challenge lengths (for challenges we send) and other limits.
- */
-#define MIN_CHALLENGE_LENGTH 16
-#define MAX_CHALLENGE_LENGTH 24
-#define MAX_RESPONSE_LENGTH 64 /* sufficient for MD5 or MS-CHAP */
-
-/*
- * Each interface is described by a chap structure.
- */
-
-typedef struct chap_state {
- int unit; /* Interface unit number */
- int clientstate; /* Client state */
- int serverstate; /* Server state */
- u_char challenge[MAX_CHALLENGE_LENGTH]; /* last challenge string sent */
- u_char chal_len; /* challenge length */
- u_char chal_id; /* ID of last challenge */
- u_char chal_type; /* hash algorithm for challenges */
- u_char id; /* Current id */
- char *chal_name; /* Our name to use with challenge */
- int chal_interval; /* Time until we challenge peer again */
- int timeouttime; /* Timeout time in seconds */
- int max_transmits; /* Maximum # of challenge transmissions */
- int chal_transmits; /* Number of transmissions of challenge */
- int resp_transmits; /* Number of transmissions of response */
- u_char response[MAX_RESPONSE_LENGTH]; /* Response to send */
- u_char resp_length; /* length of response */
- u_char resp_id; /* ID for response messages */
- u_char resp_type; /* hash algorithm for responses */
- char *resp_name; /* Our name to send with response */
-} chap_state;
-
-
-/*
- * Client (peer) states.
- */
-#define CHAPCS_INITIAL 0 /* Lower layer down, not opened */
-#define CHAPCS_CLOSED 1 /* Lower layer up, not opened */
-#define CHAPCS_PENDING 2 /* Auth us to peer when lower up */
-#define CHAPCS_LISTEN 3 /* Listening for a challenge */
-#define CHAPCS_RESPONSE 4 /* Sent response, waiting for status */
-#define CHAPCS_OPEN 5 /* We've received Success */
-
-/*
- * Server (authenticator) states.
- */
-#define CHAPSS_INITIAL 0 /* Lower layer down, not opened */
-#define CHAPSS_CLOSED 1 /* Lower layer up, not opened */
-#define CHAPSS_PENDING 2 /* Auth peer when lower up */
-#define CHAPSS_INITIAL_CHAL 3 /* We've sent the first challenge */
-#define CHAPSS_OPEN 4 /* We've sent a Success msg */
-#define CHAPSS_RECHALLENGE 5 /* We've sent another challenge */
-#define CHAPSS_BADAUTH 6 /* We've sent a Failure msg */
-
-/*
- * Timeouts.
- */
-#define CHAP_DEFTIMEOUT 3 /* Timeout time in seconds */
-#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */
-
-extern chap_state chap[];
-
-void ChapAuthWithPeer __P((int, char *, int));
-void ChapAuthPeer __P((int, char *, int));
-
-extern struct protent chap_protent;
-
-#define __CHAP_INCLUDE__
-#endif /* __CHAP_INCLUDE__ */
diff --git a/mdk-stage1/ppp/pppd/chap_ms.c b/mdk-stage1/ppp/pppd/chap_ms.c
deleted file mode 100644
index 81a57bb5a..000000000
--- a/mdk-stage1/ppp/pppd/chap_ms.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * chap_ms.c - Microsoft MS-CHAP compatible implementation.
- *
- * Copyright (c) 1995 Eric Rosenquist, Strata Software Limited.
- * http://www.strataware.com/
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Eric Rosenquist. The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
- * Modifications by Lauri Pesonen / lpesonen@clinet.fi, april 1997
- *
- * Implemented LANManager type password response to MS-CHAP challenges.
- * Now pppd provides both NT style and LANMan style blocks, and the
- * prefered is set by option "ms-lanman". Default is to use NT.
- * The hash text (StdText) was taken from Win95 RASAPI32.DLL.
- *
- * You should also use DOMAIN\\USERNAME as described in README.MSCHAP80
- */
-
-#define RCSID "$Id$"
-
-#ifdef CHAPMS
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <unistd.h>
-#ifdef HAVE_CRYPT_H
-#include <crypt.h>
-#endif
-
-#include "pppd.h"
-#include "chap.h"
-#include "chap_ms.h"
-#include "md4.h"
-
-#ifndef USE_CRYPT
-#include <des.h>
-#endif
-
-static const char rcsid[] = RCSID;
-
-typedef struct {
- u_char LANManResp[24];
- u_char NTResp[24];
- u_char UseNT; /* If 1, ignore the LANMan response field */
-} MS_ChapResponse;
-/* We use MS_CHAP_RESPONSE_LEN, rather than sizeof(MS_ChapResponse),
- in case this struct gets padded. */
-
-
-static void ChallengeResponse __P((u_char *, u_char *, u_char *));
-static void DesEncrypt __P((u_char *, u_char *, u_char *));
-static void MakeKey __P((u_char *, u_char *));
-static u_char Get7Bits __P((u_char *, int));
-static void ChapMS_NT __P((char *, int, char *, int, MS_ChapResponse *));
-#ifdef MSLANMAN
-static void ChapMS_LANMan __P((char *, int, char *, int, MS_ChapResponse *));
-#endif
-
-#ifdef USE_CRYPT
-static void Expand __P((u_char *, u_char *));
-static void Collapse __P((u_char *, u_char *));
-#endif
-
-#ifdef MSLANMAN
-bool ms_lanman = 0; /* Use LanMan password instead of NT */
- /* Has meaning only with MS-CHAP challenges */
-#endif
-
-static void
-ChallengeResponse(challenge, pwHash, response)
- u_char *challenge; /* IN 8 octets */
- u_char *pwHash; /* IN 16 octets */
- u_char *response; /* OUT 24 octets */
-{
- char ZPasswordHash[21];
-
- BZERO(ZPasswordHash, sizeof(ZPasswordHash));
- BCOPY(pwHash, ZPasswordHash, MD4_SIGNATURE_SIZE);
-
-#if 0
- dbglog("ChallengeResponse - ZPasswordHash %.*B",
- sizeof(ZPasswordHash), ZPasswordHash);
-#endif
-
- DesEncrypt(challenge, ZPasswordHash + 0, response + 0);
- DesEncrypt(challenge, ZPasswordHash + 7, response + 8);
- DesEncrypt(challenge, ZPasswordHash + 14, response + 16);
-
-#if 0
- dbglog("ChallengeResponse - response %.24B", response);
-#endif
-}
-
-
-#ifdef USE_CRYPT
-static void
-DesEncrypt(clear, key, cipher)
- u_char *clear; /* IN 8 octets */
- u_char *key; /* IN 7 octets */
- u_char *cipher; /* OUT 8 octets */
-{
- u_char des_key[8];
- u_char crypt_key[66];
- u_char des_input[66];
-
- MakeKey(key, des_key);
-
- Expand(des_key, crypt_key);
- setkey(crypt_key);
-
-#if 0
- CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet input : %.8B", clear));
-#endif
-
- Expand(clear, des_input);
- encrypt(des_input, 0);
- Collapse(des_input, cipher);
-
-#if 0
- CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet output: %.8B", cipher));
-#endif
-}
-
-#else /* USE_CRYPT */
-
-static void
-DesEncrypt(clear, key, cipher)
- u_char *clear; /* IN 8 octets */
- u_char *key; /* IN 7 octets */
- u_char *cipher; /* OUT 8 octets */
-{
- des_cblock des_key;
- des_key_schedule key_schedule;
-
- MakeKey(key, des_key);
-
- des_set_key(&des_key, key_schedule);
-
-#if 0
- CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet input : %.8B", clear));
-#endif
-
- des_ecb_encrypt((des_cblock *)clear, (des_cblock *)cipher, key_schedule, 1);
-
-#if 0
- CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet output: %.8B", cipher));
-#endif
-}
-
-#endif /* USE_CRYPT */
-
-
-static u_char Get7Bits(input, startBit)
- u_char *input;
- int startBit;
-{
- register unsigned int word;
-
- word = (unsigned)input[startBit / 8] << 8;
- word |= (unsigned)input[startBit / 8 + 1];
-
- word >>= 15 - (startBit % 8 + 7);
-
- return word & 0xFE;
-}
-
-#ifdef USE_CRYPT
-
-/* in == 8-byte string (expanded version of the 56-bit key)
- * out == 64-byte string where each byte is either 1 or 0
- * Note that the low-order "bit" is always ignored by by setkey()
- */
-static void Expand(in, out)
- u_char *in;
- u_char *out;
-{
- int j, c;
- int i;
-
- for(i = 0; i < 64; in++){
- c = *in;
- for(j = 7; j >= 0; j--)
- *out++ = (c >> j) & 01;
- i += 8;
- }
-}
-
-/* The inverse of Expand
- */
-static void Collapse(in, out)
- u_char *in;
- u_char *out;
-{
- int j;
- int i;
- unsigned int c;
-
- for (i = 0; i < 64; i += 8, out++) {
- c = 0;
- for (j = 7; j >= 0; j--, in++)
- c |= *in << j;
- *out = c & 0xff;
- }
-}
-#endif
-
-static void MakeKey(key, des_key)
- u_char *key; /* IN 56 bit DES key missing parity bits */
- u_char *des_key; /* OUT 64 bit DES key with parity bits added */
-{
- des_key[0] = Get7Bits(key, 0);
- des_key[1] = Get7Bits(key, 7);
- des_key[2] = Get7Bits(key, 14);
- des_key[3] = Get7Bits(key, 21);
- des_key[4] = Get7Bits(key, 28);
- des_key[5] = Get7Bits(key, 35);
- des_key[6] = Get7Bits(key, 42);
- des_key[7] = Get7Bits(key, 49);
-
-#ifndef USE_CRYPT
- des_set_odd_parity((des_cblock *)des_key);
-#endif
-
-#if 0
- CHAPDEBUG((LOG_INFO, "MakeKey: 56-bit input : %.7B", key));
- CHAPDEBUG((LOG_INFO, "MakeKey: 64-bit output: %.8B", des_key));
-#endif
-}
-
-static void
-ChapMS_NT(rchallenge, rchallenge_len, secret, secret_len, response)
- char *rchallenge;
- int rchallenge_len;
- char *secret;
- int secret_len;
- MS_ChapResponse *response;
-{
- int i;
-#ifdef __NetBSD__
- /* NetBSD uses the libc md4 routines which take bytes instead of bits */
- int mdlen = secret_len * 2;
-#else
- int mdlen = secret_len * 2 * 8;
-#endif
- MD4_CTX md4Context;
- u_char hash[MD4_SIGNATURE_SIZE];
- u_char unicodePassword[MAX_NT_PASSWORD * 2];
-
- /* Initialize the Unicode version of the secret (== password). */
- /* This implicitly supports 8-bit ISO8859/1 characters. */
- BZERO(unicodePassword, sizeof(unicodePassword));
- for (i = 0; i < secret_len; i++)
- unicodePassword[i * 2] = (u_char)secret[i];
-
- MD4Init(&md4Context);
- MD4Update(&md4Context, unicodePassword, mdlen);
-
- MD4Final(hash, &md4Context); /* Tell MD4 we're done */
-
- ChallengeResponse(rchallenge, hash, response->NTResp);
-}
-
-#ifdef MSLANMAN
-static u_char *StdText = (u_char *)"KGS!@#$%"; /* key from rasapi32.dll */
-
-static void
-ChapMS_LANMan(rchallenge, rchallenge_len, secret, secret_len, response)
- char *rchallenge;
- int rchallenge_len;
- char *secret;
- int secret_len;
- MS_ChapResponse *response;
-{
- int i;
- u_char UcasePassword[MAX_NT_PASSWORD]; /* max is actually 14 */
- u_char PasswordHash[MD4_SIGNATURE_SIZE];
-
- /* LANMan password is case insensitive */
- BZERO(UcasePassword, sizeof(UcasePassword));
- for (i = 0; i < secret_len; i++)
- UcasePassword[i] = (u_char)toupper(secret[i]);
- DesEncrypt( StdText, UcasePassword + 0, PasswordHash + 0 );
- DesEncrypt( StdText, UcasePassword + 7, PasswordHash + 8 );
- ChallengeResponse(rchallenge, PasswordHash, response->LANManResp);
-}
-#endif
-
-void
-ChapMS(cstate, rchallenge, rchallenge_len, secret, secret_len)
- chap_state *cstate;
- char *rchallenge;
- int rchallenge_len;
- char *secret;
- int secret_len;
-{
- MS_ChapResponse response;
-
-#if 0
- CHAPDEBUG((LOG_INFO, "ChapMS: secret is '%.*s'", secret_len, secret));
-#endif
- BZERO(&response, sizeof(response));
-
- /* Calculate both always */
- ChapMS_NT(rchallenge, rchallenge_len, secret, secret_len, &response);
-
-#ifdef MSLANMAN
- ChapMS_LANMan(rchallenge, rchallenge_len, secret, secret_len, &response);
-
- /* prefered method is set by option */
- response.UseNT = !ms_lanman;
-#else
- response.UseNT = 1;
-#endif
-
- BCOPY(&response, cstate->response, MS_CHAP_RESPONSE_LEN);
- cstate->resp_length = MS_CHAP_RESPONSE_LEN;
-}
-
-#endif /* CHAPMS */
diff --git a/mdk-stage1/ppp/pppd/chap_ms.h b/mdk-stage1/ppp/pppd/chap_ms.h
deleted file mode 100644
index fad2755c8..000000000
--- a/mdk-stage1/ppp/pppd/chap_ms.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * chap.h - Challenge Handshake Authentication Protocol definitions.
- *
- * Copyright (c) 1995 Eric Rosenquist, Strata Software Limited.
- * http://www.strataware.com/
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Eric Rosenquist. The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-#ifndef __CHAPMS_INCLUDE__
-
-#define MD4_SIGNATURE_SIZE 16 /* 16 bytes in a MD4 message digest */
-#define MAX_NT_PASSWORD 256 /* Maximum number of (Unicode) chars in an NT password */
-
-void ChapMS __P((chap_state *, char *, int, char *, int));
-
-#define __CHAPMS_INCLUDE__
-#endif /* __CHAPMS_INCLUDE__ */
diff --git a/mdk-stage1/ppp/pppd/demand.c b/mdk-stage1/ppp/pppd/demand.c
deleted file mode 100644
index 9a740be8d..000000000
--- a/mdk-stage1/ppp/pppd/demand.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * demand.c - Support routines for demand-dialling.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University. The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#ifdef PPP_FILTER
-#include <net/if.h>
-#include <net/bpf.h>
-#include <pcap.h>
-#endif
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-#include "lcp.h"
-
-static const char rcsid[] = RCSID;
-
-char *frame;
-int framelen;
-int framemax;
-int escape_flag;
-int flush_flag;
-int fcs;
-
-struct packet {
- int length;
- struct packet *next;
- unsigned char data[1];
-};
-
-struct packet *pend_q;
-struct packet *pend_qtail;
-
-static int active_packet __P((unsigned char *, int));
-
-/*
- * demand_conf - configure the interface for doing dial-on-demand.
- */
-void
-demand_conf()
-{
- int i;
- struct protent *protp;
-
-/* framemax = lcp_allowoptions[0].mru;
- if (framemax < PPP_MRU) */
- framemax = PPP_MRU;
- framemax += PPP_HDRLEN + PPP_FCSLEN;
- frame = malloc(framemax);
- if (frame == NULL)
- novm("demand frame");
- framelen = 0;
- pend_q = NULL;
- escape_flag = 0;
- flush_flag = 0;
- fcs = PPP_INITFCS;
-
- netif_set_mtu(0, MIN(lcp_allowoptions[0].mru, PPP_MRU));
- ppp_send_config(0, PPP_MRU, (u_int32_t) 0, 0, 0);
- ppp_recv_config(0, PPP_MRU, (u_int32_t) 0, 0, 0);
-
-#ifdef PPP_FILTER
- set_filters(&pass_filter, &active_filter);
-#endif
-
- /*
- * Call the demand_conf procedure for each protocol that's got one.
- */
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (protp->enabled_flag && protp->demand_conf != NULL)
- if (!((*protp->demand_conf)(0)))
- die(1);
-}
-
-
-/*
- * demand_block - set each network protocol to block further packets.
- */
-void
-demand_block()
-{
- int i;
- struct protent *protp;
-
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (protp->enabled_flag && protp->demand_conf != NULL)
- sifnpmode(0, protp->protocol & ~0x8000, NPMODE_QUEUE);
- get_loop_output();
-}
-
-/*
- * demand_discard - set each network protocol to discard packets
- * with an error.
- */
-void
-demand_discard()
-{
- struct packet *pkt, *nextpkt;
- int i;
- struct protent *protp;
-
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (protp->enabled_flag && protp->demand_conf != NULL)
- sifnpmode(0, protp->protocol & ~0x8000, NPMODE_ERROR);
- get_loop_output();
-
- /* discard all saved packets */
- for (pkt = pend_q; pkt != NULL; pkt = nextpkt) {
- nextpkt = pkt->next;
- free(pkt);
- }
- pend_q = NULL;
- framelen = 0;
- flush_flag = 0;
- escape_flag = 0;
- fcs = PPP_INITFCS;
-}
-
-/*
- * demand_unblock - set each enabled network protocol to pass packets.
- */
-void
-demand_unblock()
-{
- int i;
- struct protent *protp;
-
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (protp->enabled_flag && protp->demand_conf != NULL)
- sifnpmode(0, protp->protocol & ~0x8000, NPMODE_PASS);
-}
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
- 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
- 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
- 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
- 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
- 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
- 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
- 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
- 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
- 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
- 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
- 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
- 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
- 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
- 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
- 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
- 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
- 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
- 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
- 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
- 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
- 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
- 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
- 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
- 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
- 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
- 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
- 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
- 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
- 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
- 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
- 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
- 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-/*
- * loop_chars - process characters received from the loopback.
- * Calls loop_frame when a complete frame has been accumulated.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-loop_chars(p, n)
- unsigned char *p;
- int n;
-{
- int c, rv;
-
- rv = 0;
- for (; n > 0; --n) {
- c = *p++;
- if (c == PPP_FLAG) {
- if (!escape_flag && !flush_flag
- && framelen > 2 && fcs == PPP_GOODFCS) {
- framelen -= 2;
- if (loop_frame((unsigned char *)frame, framelen))
- rv = 1;
- }
- framelen = 0;
- flush_flag = 0;
- escape_flag = 0;
- fcs = PPP_INITFCS;
- continue;
- }
- if (flush_flag)
- continue;
- if (escape_flag) {
- c ^= PPP_TRANS;
- escape_flag = 0;
- } else if (c == PPP_ESCAPE) {
- escape_flag = 1;
- continue;
- }
- if (framelen >= framemax) {
- flush_flag = 1;
- continue;
- }
- frame[framelen++] = c;
- fcs = PPP_FCS(fcs, c);
- }
- return rv;
-}
-
-/*
- * loop_frame - given a frame obtained from the loopback,
- * decide whether to bring up the link or not, and, if we want
- * to transmit this frame later, put it on the pending queue.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- * We assume that the kernel driver has already applied the
- * pass_filter, so we won't get packets it rejected.
- * We apply the active_filter to see if we want this packet to
- * bring up the link.
- */
-int
-loop_frame(frame, len)
- unsigned char *frame;
- int len;
-{
- struct packet *pkt;
-
- /* dbglog("from loop: %P", frame, len); */
- if (len < PPP_HDRLEN)
- return 0;
- if ((PPP_PROTOCOL(frame) & 0x8000) != 0)
- return 0; /* shouldn't get any of these anyway */
- if (!active_packet(frame, len))
- return 0;
-
- pkt = (struct packet *) malloc(sizeof(struct packet) + len);
- if (pkt != NULL) {
- pkt->length = len;
- pkt->next = NULL;
- memcpy(pkt->data, frame, len);
- if (pend_q == NULL)
- pend_q = pkt;
- else
- pend_qtail->next = pkt;
- pend_qtail = pkt;
- }
- return 1;
-}
-
-/*
- * demand_rexmit - Resend all those frames which we got via the
- * loopback, now that the real serial link is up.
- */
-void
-demand_rexmit(proto)
- int proto;
-{
- struct packet *pkt, *prev, *nextpkt;
-
- prev = NULL;
- pkt = pend_q;
- pend_q = NULL;
- for (; pkt != NULL; pkt = nextpkt) {
- nextpkt = pkt->next;
- if (PPP_PROTOCOL(pkt->data) == proto) {
- output(0, pkt->data, pkt->length);
- free(pkt);
- } else {
- if (prev == NULL)
- pend_q = pkt;
- else
- prev->next = pkt;
- prev = pkt;
- }
- }
- pend_qtail = prev;
- if (prev != NULL)
- prev->next = NULL;
-}
-
-/*
- * Scan a packet to decide whether it is an "active" packet,
- * that is, whether it is worth bringing up the link for.
- */
-static int
-active_packet(p, len)
- unsigned char *p;
- int len;
-{
- int proto, i;
- struct protent *protp;
-
- if (len < PPP_HDRLEN)
- return 0;
- proto = PPP_PROTOCOL(p);
-#ifdef PPP_FILTER
- if (pass_filter.bf_len != 0
- && bpf_filter(pass_filter.bf_insns, p, len, len) == 0)
- return 0;
- if (active_filter.bf_len != 0
- && bpf_filter(active_filter.bf_insns, p, len, len) == 0)
- return 0;
-#endif
- for (i = 0; (protp = protocols[i]) != NULL; ++i) {
- if (protp->protocol < 0xC000 && (protp->protocol & ~0x8000) == proto) {
- if (!protp->enabled_flag)
- return 0;
- if (protp->active_pkt == NULL)
- return 1;
- return (*protp->active_pkt)(p, len);
- }
- }
- return 0; /* not a supported protocol !!?? */
-}
diff --git a/mdk-stage1/ppp/pppd/eui64.c b/mdk-stage1/ppp/pppd/eui64.c
deleted file mode 100644
index 7f3176035..000000000
--- a/mdk-stage1/ppp/pppd/eui64.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- eui64.c - EUI64 routines for IPv6CP.
- Copyright (C) 1999 Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
- Redistribution and use in source and binary forms are permitted
- provided that the above copyright notice and this paragraph are
- duplicated in all such forms and that any documentation,
- advertising materials, and other materials related to such
- distribution and use acknowledge that the software was developed
- by Tommi Komulainen. The name of the author may not be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-
- $Id$
-*/
-
-#define RCSID "$Id$"
-
-#include "pppd.h"
-
-static const char rcsid[] = RCSID;
-
-/*
- * eui64_ntoa - Make an ascii representation of an interface identifier
- */
-char *
-eui64_ntoa(e)
- eui64_t e;
-{
- static char buf[32];
-
- snprintf(buf, 32, "%02x%02x:%02x%02x:%02x%02x:%02x%02x",
- e.e8[0], e.e8[1], e.e8[2], e.e8[3],
- e.e8[4], e.e8[5], e.e8[6], e.e8[7]);
- return buf;
-}
diff --git a/mdk-stage1/ppp/pppd/eui64.h b/mdk-stage1/ppp/pppd/eui64.h
deleted file mode 100644
index ca4445345..000000000
--- a/mdk-stage1/ppp/pppd/eui64.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- eui64.h - EUI64 routines for IPv6CP.
- Copyright (C) 1999 Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
- Redistribution and use in source and binary forms are permitted
- provided that the above copyright notice and this paragraph are
- duplicated in all such forms and that any documentation,
- advertising materials, and other materials related to such
- distribution and use acknowledge that the software was developed
- by Tommi Komulainen. The name of the author may not be used
- to endorse or promote products derived from this software without
- specific prior written permission.
- THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-
- $Id$
-*/
-
-#ifndef __EUI64_H__
-#define __EUI64_H__
-
-#if !defined(INET6)
-#error "this file should only be included when INET6 is defined"
-#endif /* not defined(INET6) */
-
-#if defined(SOL2)
-#include <netinet/in.h>
-
-typedef union {
- uint8_t e8[8]; /* lower 64-bit IPv6 address */
- uint32_t e32[2]; /* lower 64-bit IPv6 address */
-} eui64_t;
-
-/*
- * Declare the two below, since in.h only defines them when _KERNEL
- * is declared - which shouldn't be true when dealing with user-land programs
- */
-#define s6_addr8 _S6_un._S6_u8
-#define s6_addr32 _S6_un._S6_u32
-
-#else /* else if not defined(SOL2) */
-
-/*
- * TODO:
- *
- * Maybe this should be done by processing struct in6_addr directly...
- */
-typedef union
-{
- u_int8_t e8[8];
- u_int16_t e16[4];
- u_int32_t e32[2];
-} eui64_t;
-
-#endif /* defined(SOL2) */
-
-#define eui64_iszero(e) (((e).e32[0] | (e).e32[1]) == 0)
-#define eui64_equals(e, o) (((e).e32[0] == (o).e32[0]) && \
- ((e).e32[1] == (o).e32[1]))
-#define eui64_zero(e) (e).e32[0] = (e).e32[1] = 0;
-
-#define eui64_copy(s, d) memcpy(&(d), &(s), sizeof(eui64_t))
-
-#define eui64_magic(e) do { \
- (e).e32[0] = magic(); \
- (e).e32[1] = magic(); \
- (e).e8[0] &= ~2; \
- } while (0)
-#define eui64_magic_nz(x) do { \
- eui64_magic(x); \
- } while (eui64_iszero(x))
-#define eui64_magic_ne(x, y) do { \
- eui64_magic(x); \
- } while (eui64_equals(x, y))
-
-#define eui64_get(ll, cp) do { \
- eui64_copy((*cp), (ll)); \
- (cp) += sizeof(eui64_t); \
- } while (0)
-
-#define eui64_put(ll, cp) do { \
- eui64_copy((ll), (*cp)); \
- (cp) += sizeof(eui64_t); \
- } while (0)
-
-#define eui64_set32(e, l) do { \
- (e).e32[0] = 0; \
- (e).e32[1] = htonl(l); \
- } while (0)
-#define eui64_setlo32(e, l) eui64_set32(e, l)
-
-char *eui64_ntoa __P((eui64_t)); /* Returns ascii representation of id */
-
-#endif /* __EUI64_H__ */
-
diff --git a/mdk-stage1/ppp/pppd/fsm.c b/mdk-stage1/ppp/pppd/fsm.c
deleted file mode 100644
index 07a8c11f1..000000000
--- a/mdk-stage1/ppp/pppd/fsm.c
+++ /dev/null
@@ -1,762 +0,0 @@
-/*
- * fsm.c - {Link, IP} Control Protocol Finite State Machine.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-/*
- * TODO:
- * Randomize fsm id on link/init.
- * Deal with variable outgoing MTU.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-
-#include "pppd.h"
-#include "fsm.h"
-
-static const char rcsid[] = RCSID;
-
-static void fsm_timeout __P((void *));
-static void fsm_rconfreq __P((fsm *, int, u_char *, int));
-static void fsm_rconfack __P((fsm *, int, u_char *, int));
-static void fsm_rconfnakrej __P((fsm *, int, int, u_char *, int));
-static void fsm_rtermreq __P((fsm *, int, u_char *, int));
-static void fsm_rtermack __P((fsm *));
-static void fsm_rcoderej __P((fsm *, u_char *, int));
-static void fsm_sconfreq __P((fsm *, int));
-
-#define PROTO_NAME(f) ((f)->callbacks->proto_name)
-
-int peer_mru[NUM_PPP];
-
-
-/*
- * fsm_init - Initialize fsm.
- *
- * Initialize fsm state.
- */
-void
-fsm_init(f)
- fsm *f;
-{
- f->state = INITIAL;
- f->flags = 0;
- f->id = 0; /* XXX Start with random id? */
- f->timeouttime = DEFTIMEOUT;
- f->maxconfreqtransmits = DEFMAXCONFREQS;
- f->maxtermtransmits = DEFMAXTERMREQS;
- f->maxnakloops = DEFMAXNAKLOOPS;
- f->term_reason_len = 0;
-}
-
-
-/*
- * fsm_lowerup - The lower layer is up.
- */
-void
-fsm_lowerup(f)
- fsm *f;
-{
- switch( f->state ){
- case INITIAL:
- f->state = CLOSED;
- break;
-
- case STARTING:
- if( f->flags & OPT_SILENT )
- f->state = STOPPED;
- else {
- /* Send an initial configure-request */
- fsm_sconfreq(f, 0);
- f->state = REQSENT;
- }
- break;
-
- default:
- FSMDEBUG(("%s: Up event in state %d!", PROTO_NAME(f), f->state));
- }
-}
-
-
-/*
- * fsm_lowerdown - The lower layer is down.
- *
- * Cancel all timeouts and inform upper layers.
- */
-void
-fsm_lowerdown(f)
- fsm *f;
-{
- switch( f->state ){
- case CLOSED:
- f->state = INITIAL;
- break;
-
- case STOPPED:
- f->state = STARTING;
- if( f->callbacks->starting )
- (*f->callbacks->starting)(f);
- break;
-
- case CLOSING:
- f->state = INITIAL;
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- break;
-
- case STOPPING:
- case REQSENT:
- case ACKRCVD:
- case ACKSENT:
- f->state = STARTING;
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- break;
-
- case OPENED:
- if( f->callbacks->down )
- (*f->callbacks->down)(f);
- f->state = STARTING;
- break;
-
- default:
- FSMDEBUG(("%s: Down event in state %d!", PROTO_NAME(f), f->state));
- }
-}
-
-
-/*
- * fsm_open - Link is allowed to come up.
- */
-void
-fsm_open(f)
- fsm *f;
-{
- switch( f->state ){
- case INITIAL:
- f->state = STARTING;
- if( f->callbacks->starting )
- (*f->callbacks->starting)(f);
- break;
-
- case CLOSED:
- if( f->flags & OPT_SILENT )
- f->state = STOPPED;
- else {
- /* Send an initial configure-request */
- fsm_sconfreq(f, 0);
- f->state = REQSENT;
- }
- break;
-
- case CLOSING:
- f->state = STOPPING;
- /* fall through */
- case STOPPED:
- case OPENED:
- if( f->flags & OPT_RESTART ){
- fsm_lowerdown(f);
- fsm_lowerup(f);
- }
- break;
- }
-}
-
-
-/*
- * fsm_close - Start closing connection.
- *
- * Cancel timeouts and either initiate close or possibly go directly to
- * the CLOSED state.
- */
-void
-fsm_close(f, reason)
- fsm *f;
- char *reason;
-{
- f->term_reason = reason;
- f->term_reason_len = (reason == NULL? 0: strlen(reason));
- switch( f->state ){
- case STARTING:
- f->state = INITIAL;
- break;
- case STOPPED:
- f->state = CLOSED;
- break;
- case STOPPING:
- f->state = CLOSING;
- break;
-
- case REQSENT:
- case ACKRCVD:
- case ACKSENT:
- case OPENED:
- if( f->state != OPENED )
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- else if( f->callbacks->down )
- (*f->callbacks->down)(f); /* Inform upper layers we're down */
-
- /* Init restart counter, send Terminate-Request */
- f->retransmits = f->maxtermtransmits;
- fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
- (u_char *) f->term_reason, f->term_reason_len);
- TIMEOUT(fsm_timeout, f, f->timeouttime);
- --f->retransmits;
-
- f->state = CLOSING;
- break;
- }
-}
-
-
-/*
- * fsm_timeout - Timeout expired.
- */
-static void
-fsm_timeout(arg)
- void *arg;
-{
- fsm *f = (fsm *) arg;
-
- switch (f->state) {
- case CLOSING:
- case STOPPING:
- if( f->retransmits <= 0 ){
- /*
- * We've waited for an ack long enough. Peer probably heard us.
- */
- f->state = (f->state == CLOSING)? CLOSED: STOPPED;
- if( f->callbacks->finished )
- (*f->callbacks->finished)(f);
- } else {
- /* Send Terminate-Request */
- fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
- (u_char *) f->term_reason, f->term_reason_len);
- TIMEOUT(fsm_timeout, f, f->timeouttime);
- --f->retransmits;
- }
- break;
-
- case REQSENT:
- case ACKRCVD:
- case ACKSENT:
- if (f->retransmits <= 0) {
- warn("%s: timeout sending Config-Requests\n", PROTO_NAME(f));
- f->state = STOPPED;
- if( (f->flags & OPT_PASSIVE) == 0 && f->callbacks->finished )
- (*f->callbacks->finished)(f);
-
- } else {
- /* Retransmit the configure-request */
- if (f->callbacks->retransmit)
- (*f->callbacks->retransmit)(f);
- fsm_sconfreq(f, 1); /* Re-send Configure-Request */
- if( f->state == ACKRCVD )
- f->state = REQSENT;
- }
- break;
-
- default:
- FSMDEBUG(("%s: Timeout event in state %d!", PROTO_NAME(f), f->state));
- }
-}
-
-
-/*
- * fsm_input - Input packet.
- */
-void
-fsm_input(f, inpacket, l)
- fsm *f;
- u_char *inpacket;
- int l;
-{
- u_char *inp;
- u_char code, id;
- int len;
-
- /*
- * Parse header (code, id and length).
- * If packet too short, drop it.
- */
- inp = inpacket;
- if (l < HEADERLEN) {
- FSMDEBUG(("fsm_input(%x): Rcvd short header.", f->protocol));
- return;
- }
- GETCHAR(code, inp);
- GETCHAR(id, inp);
- GETSHORT(len, inp);
- if (len < HEADERLEN) {
- FSMDEBUG(("fsm_input(%x): Rcvd illegal length.", f->protocol));
- return;
- }
- if (len > l) {
- FSMDEBUG(("fsm_input(%x): Rcvd short packet.", f->protocol));
- return;
- }
- len -= HEADERLEN; /* subtract header length */
-
- if( f->state == INITIAL || f->state == STARTING ){
- FSMDEBUG(("fsm_input(%x): Rcvd packet in state %d.",
- f->protocol, f->state));
- return;
- }
-
- /*
- * Action depends on code.
- */
- switch (code) {
- case CONFREQ:
- fsm_rconfreq(f, id, inp, len);
- break;
-
- case CONFACK:
- fsm_rconfack(f, id, inp, len);
- break;
-
- case CONFNAK:
- case CONFREJ:
- fsm_rconfnakrej(f, code, id, inp, len);
- break;
-
- case TERMREQ:
- fsm_rtermreq(f, id, inp, len);
- break;
-
- case TERMACK:
- fsm_rtermack(f);
- break;
-
- case CODEREJ:
- fsm_rcoderej(f, inp, len);
- break;
-
- default:
- if( !f->callbacks->extcode
- || !(*f->callbacks->extcode)(f, code, id, inp, len) )
- fsm_sdata(f, CODEREJ, ++f->id, inpacket, len + HEADERLEN);
- break;
- }
-}
-
-
-/*
- * fsm_rconfreq - Receive Configure-Request.
- */
-static void
-fsm_rconfreq(f, id, inp, len)
- fsm *f;
- u_char id;
- u_char *inp;
- int len;
-{
- int code, reject_if_disagree;
-
- switch( f->state ){
- case CLOSED:
- /* Go away, we're closed */
- fsm_sdata(f, TERMACK, id, NULL, 0);
- return;
- case CLOSING:
- case STOPPING:
- return;
-
- case OPENED:
- /* Go down and restart negotiation */
- if( f->callbacks->down )
- (*f->callbacks->down)(f); /* Inform upper layers */
- fsm_sconfreq(f, 0); /* Send initial Configure-Request */
- break;
-
- case STOPPED:
- /* Negotiation started by our peer */
- fsm_sconfreq(f, 0); /* Send initial Configure-Request */
- f->state = REQSENT;
- break;
- }
-
- /*
- * Pass the requested configuration options
- * to protocol-specific code for checking.
- */
- if (f->callbacks->reqci){ /* Check CI */
- reject_if_disagree = (f->nakloops >= f->maxnakloops);
- code = (*f->callbacks->reqci)(f, inp, &len, reject_if_disagree);
- } else if (len)
- code = CONFREJ; /* Reject all CI */
- else
- code = CONFACK;
-
- /* send the Ack, Nak or Rej to the peer */
- fsm_sdata(f, code, id, inp, len);
-
- if (code == CONFACK) {
- if (f->state == ACKRCVD) {
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- f->state = OPENED;
- if (f->callbacks->up)
- (*f->callbacks->up)(f); /* Inform upper layers */
- } else
- f->state = ACKSENT;
- f->nakloops = 0;
-
- } else {
- /* we sent CONFACK or CONFREJ */
- if (f->state != ACKRCVD)
- f->state = REQSENT;
- if( code == CONFNAK )
- ++f->nakloops;
- }
-}
-
-
-/*
- * fsm_rconfack - Receive Configure-Ack.
- */
-static void
-fsm_rconfack(f, id, inp, len)
- fsm *f;
- int id;
- u_char *inp;
- int len;
-{
- if (id != f->reqid || f->seen_ack) /* Expected id? */
- return; /* Nope, toss... */
- if( !(f->callbacks->ackci? (*f->callbacks->ackci)(f, inp, len):
- (len == 0)) ){
- /* Ack is bad - ignore it */
- error("Received bad configure-ack: %P", inp, len);
- return;
- }
- f->seen_ack = 1;
-
- switch (f->state) {
- case CLOSED:
- case STOPPED:
- fsm_sdata(f, TERMACK, id, NULL, 0);
- break;
-
- case REQSENT:
- f->state = ACKRCVD;
- f->retransmits = f->maxconfreqtransmits;
- break;
-
- case ACKRCVD:
- /* Huh? an extra valid Ack? oh well... */
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- fsm_sconfreq(f, 0);
- f->state = REQSENT;
- break;
-
- case ACKSENT:
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- f->state = OPENED;
- f->retransmits = f->maxconfreqtransmits;
- if (f->callbacks->up)
- (*f->callbacks->up)(f); /* Inform upper layers */
- break;
-
- case OPENED:
- /* Go down and restart negotiation */
- if (f->callbacks->down)
- (*f->callbacks->down)(f); /* Inform upper layers */
- fsm_sconfreq(f, 0); /* Send initial Configure-Request */
- f->state = REQSENT;
- break;
- }
-}
-
-
-/*
- * fsm_rconfnakrej - Receive Configure-Nak or Configure-Reject.
- */
-static void
-fsm_rconfnakrej(f, code, id, inp, len)
- fsm *f;
- int code, id;
- u_char *inp;
- int len;
-{
- int (*proc) __P((fsm *, u_char *, int));
- int ret;
-
- if (id != f->reqid || f->seen_ack) /* Expected id? */
- return; /* Nope, toss... */
- proc = (code == CONFNAK)? f->callbacks->nakci: f->callbacks->rejci;
- if (!proc || !(ret = proc(f, inp, len))) {
- /* Nak/reject is bad - ignore it */
- error("Received bad configure-nak/rej: %P", inp, len);
- return;
- }
- f->seen_ack = 1;
-
- switch (f->state) {
- case CLOSED:
- case STOPPED:
- fsm_sdata(f, TERMACK, id, NULL, 0);
- break;
-
- case REQSENT:
- case ACKSENT:
- /* They didn't agree to what we wanted - try another request */
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- if (ret < 0)
- f->state = STOPPED; /* kludge for stopping CCP */
- else
- fsm_sconfreq(f, 0); /* Send Configure-Request */
- break;
-
- case ACKRCVD:
- /* Got a Nak/reject when we had already had an Ack?? oh well... */
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- fsm_sconfreq(f, 0);
- f->state = REQSENT;
- break;
-
- case OPENED:
- /* Go down and restart negotiation */
- if (f->callbacks->down)
- (*f->callbacks->down)(f); /* Inform upper layers */
- fsm_sconfreq(f, 0); /* Send initial Configure-Request */
- f->state = REQSENT;
- break;
- }
-}
-
-
-/*
- * fsm_rtermreq - Receive Terminate-Req.
- */
-static void
-fsm_rtermreq(f, id, p, len)
- fsm *f;
- int id;
- u_char *p;
- int len;
-{
- switch (f->state) {
- case ACKRCVD:
- case ACKSENT:
- f->state = REQSENT; /* Start over but keep trying */
- break;
-
- case OPENED:
- if (len > 0) {
- info("%s terminated by peer (%0.*v)", PROTO_NAME(f), len, p);
- } else
- info("%s terminated by peer", PROTO_NAME(f));
- if (f->callbacks->down)
- (*f->callbacks->down)(f); /* Inform upper layers */
- f->retransmits = 0;
- f->state = STOPPING;
- TIMEOUT(fsm_timeout, f, f->timeouttime);
- break;
- }
-
- fsm_sdata(f, TERMACK, id, NULL, 0);
-}
-
-
-/*
- * fsm_rtermack - Receive Terminate-Ack.
- */
-static void
-fsm_rtermack(f)
- fsm *f;
-{
- switch (f->state) {
- case CLOSING:
- UNTIMEOUT(fsm_timeout, f);
- f->state = CLOSED;
- if( f->callbacks->finished )
- (*f->callbacks->finished)(f);
- break;
- case STOPPING:
- UNTIMEOUT(fsm_timeout, f);
- f->state = STOPPED;
- if( f->callbacks->finished )
- (*f->callbacks->finished)(f);
- break;
-
- case ACKRCVD:
- f->state = REQSENT;
- break;
-
- case OPENED:
- if (f->callbacks->down)
- (*f->callbacks->down)(f); /* Inform upper layers */
- fsm_sconfreq(f, 0);
- break;
- }
-}
-
-
-/*
- * fsm_rcoderej - Receive an Code-Reject.
- */
-static void
-fsm_rcoderej(f, inp, len)
- fsm *f;
- u_char *inp;
- int len;
-{
- u_char code, id;
-
- if (len < HEADERLEN) {
- FSMDEBUG(("fsm_rcoderej: Rcvd short Code-Reject packet!"));
- return;
- }
- GETCHAR(code, inp);
- GETCHAR(id, inp);
- warn("%s: Rcvd Code-Reject for code %d, id %d", PROTO_NAME(f), code, id);
-
- if( f->state == ACKRCVD )
- f->state = REQSENT;
-}
-
-
-/*
- * fsm_protreject - Peer doesn't speak this protocol.
- *
- * Treat this as a catastrophic error (RXJ-).
- */
-void
-fsm_protreject(f)
- fsm *f;
-{
- switch( f->state ){
- case CLOSING:
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- /* fall through */
- case CLOSED:
- f->state = CLOSED;
- if( f->callbacks->finished )
- (*f->callbacks->finished)(f);
- break;
-
- case STOPPING:
- case REQSENT:
- case ACKRCVD:
- case ACKSENT:
- UNTIMEOUT(fsm_timeout, f); /* Cancel timeout */
- /* fall through */
- case STOPPED:
- f->state = STOPPED;
- if( f->callbacks->finished )
- (*f->callbacks->finished)(f);
- break;
-
- case OPENED:
- if( f->callbacks->down )
- (*f->callbacks->down)(f);
-
- /* Init restart counter, send Terminate-Request */
- f->retransmits = f->maxtermtransmits;
- fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
- (u_char *) f->term_reason, f->term_reason_len);
- TIMEOUT(fsm_timeout, f, f->timeouttime);
- --f->retransmits;
-
- f->state = STOPPING;
- break;
-
- default:
- FSMDEBUG(("%s: Protocol-reject event in state %d!",
- PROTO_NAME(f), f->state));
- }
-}
-
-
-/*
- * fsm_sconfreq - Send a Configure-Request.
- */
-static void
-fsm_sconfreq(f, retransmit)
- fsm *f;
- int retransmit;
-{
- u_char *outp;
- int cilen;
-
- if( f->state != REQSENT && f->state != ACKRCVD && f->state != ACKSENT ){
- /* Not currently negotiating - reset options */
- if( f->callbacks->resetci )
- (*f->callbacks->resetci)(f);
- f->nakloops = 0;
- }
-
- if( !retransmit ){
- /* New request - reset retransmission counter, use new ID */
- f->retransmits = f->maxconfreqtransmits;
- f->reqid = ++f->id;
- }
-
- f->seen_ack = 0;
-
- /*
- * Make up the request packet
- */
- outp = outpacket_buf + PPP_HDRLEN + HEADERLEN;
- if( f->callbacks->cilen && f->callbacks->addci ){
- cilen = (*f->callbacks->cilen)(f);
- if( cilen > peer_mru[f->unit] - HEADERLEN )
- cilen = peer_mru[f->unit] - HEADERLEN;
- if (f->callbacks->addci)
- (*f->callbacks->addci)(f, outp, &cilen);
- } else
- cilen = 0;
-
- /* send the request to our peer */
- fsm_sdata(f, CONFREQ, f->reqid, outp, cilen);
-
- /* start the retransmit timer */
- --f->retransmits;
- TIMEOUT(fsm_timeout, f, f->timeouttime);
-}
-
-
-/*
- * fsm_sdata - Send some data.
- *
- * Used for all packets sent to our peer by this module.
- */
-void
-fsm_sdata(f, code, id, data, datalen)
- fsm *f;
- u_char code, id;
- u_char *data;
- int datalen;
-{
- u_char *outp;
- int outlen;
-
- /* Adjust length to be smaller than MTU */
- outp = outpacket_buf;
- if (datalen > peer_mru[f->unit] - HEADERLEN)
- datalen = peer_mru[f->unit] - HEADERLEN;
- if (datalen && data != outp + PPP_HDRLEN + HEADERLEN)
- BCOPY(data, outp + PPP_HDRLEN + HEADERLEN, datalen);
- outlen = datalen + HEADERLEN;
- MAKEHEADER(outp, f->protocol);
- PUTCHAR(code, outp);
- PUTCHAR(id, outp);
- PUTSHORT(outlen, outp);
- output(f->unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
diff --git a/mdk-stage1/ppp/pppd/fsm.h b/mdk-stage1/ppp/pppd/fsm.h
deleted file mode 100644
index c94a68e6c..000000000
--- a/mdk-stage1/ppp/pppd/fsm.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * fsm.h - {Link, IP} Control Protocol Finite State Machine definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Packet header = Code, id, length.
- */
-#define HEADERLEN 4
-
-
-/*
- * CP (LCP, IPCP, etc.) codes.
- */
-#define CONFREQ 1 /* Configuration Request */
-#define CONFACK 2 /* Configuration Ack */
-#define CONFNAK 3 /* Configuration Nak */
-#define CONFREJ 4 /* Configuration Reject */
-#define TERMREQ 5 /* Termination Request */
-#define TERMACK 6 /* Termination Ack */
-#define CODEREJ 7 /* Code Reject */
-
-
-/*
- * Each FSM is described by an fsm structure and fsm callbacks.
- */
-typedef struct fsm {
- int unit; /* Interface unit number */
- int protocol; /* Data Link Layer Protocol field value */
- int state; /* State */
- int flags; /* Contains option bits */
- u_char id; /* Current id */
- u_char reqid; /* Current request id */
- u_char seen_ack; /* Have received valid Ack/Nak/Rej to Req */
- int timeouttime; /* Timeout time in milliseconds */
- int maxconfreqtransmits; /* Maximum Configure-Request transmissions */
- int retransmits; /* Number of retransmissions left */
- int maxtermtransmits; /* Maximum Terminate-Request transmissions */
- int nakloops; /* Number of nak loops since last ack */
- int maxnakloops; /* Maximum number of nak loops tolerated */
- struct fsm_callbacks *callbacks; /* Callback routines */
- char *term_reason; /* Reason for closing protocol */
- int term_reason_len; /* Length of term_reason */
-} fsm;
-
-
-typedef struct fsm_callbacks {
- void (*resetci) /* Reset our Configuration Information */
- __P((fsm *));
- int (*cilen) /* Length of our Configuration Information */
- __P((fsm *));
- void (*addci) /* Add our Configuration Information */
- __P((fsm *, u_char *, int *));
- int (*ackci) /* ACK our Configuration Information */
- __P((fsm *, u_char *, int));
- int (*nakci) /* NAK our Configuration Information */
- __P((fsm *, u_char *, int));
- int (*rejci) /* Reject our Configuration Information */
- __P((fsm *, u_char *, int));
- int (*reqci) /* Request peer's Configuration Information */
- __P((fsm *, u_char *, int *, int));
- void (*up) /* Called when fsm reaches OPENED state */
- __P((fsm *));
- void (*down) /* Called when fsm leaves OPENED state */
- __P((fsm *));
- void (*starting) /* Called when we want the lower layer */
- __P((fsm *));
- void (*finished) /* Called when we don't want the lower layer */
- __P((fsm *));
- void (*protreject) /* Called when Protocol-Reject received */
- __P((int));
- void (*retransmit) /* Retransmission is necessary */
- __P((fsm *));
- int (*extcode) /* Called when unknown code received */
- __P((fsm *, int, int, u_char *, int));
- char *proto_name; /* String name for protocol (for messages) */
-} fsm_callbacks;
-
-
-/*
- * Link states.
- */
-#define INITIAL 0 /* Down, hasn't been opened */
-#define STARTING 1 /* Down, been opened */
-#define CLOSED 2 /* Up, hasn't been opened */
-#define STOPPED 3 /* Open, waiting for down event */
-#define CLOSING 4 /* Terminating the connection, not open */
-#define STOPPING 5 /* Terminating, but open */
-#define REQSENT 6 /* We've sent a Config Request */
-#define ACKRCVD 7 /* We've received a Config Ack */
-#define ACKSENT 8 /* We've sent a Config Ack */
-#define OPENED 9 /* Connection available */
-
-
-/*
- * Flags - indicate options controlling FSM operation
- */
-#define OPT_PASSIVE 1 /* Don't die if we don't get a response */
-#define OPT_RESTART 2 /* Treat 2nd OPEN as DOWN, UP */
-#define OPT_SILENT 4 /* Wait for peer to speak first */
-
-
-/*
- * Timeouts.
- */
-#define DEFTIMEOUT 3 /* Timeout time in seconds */
-#define DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */
-#define DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */
-#define DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */
-
-
-/*
- * Prototypes
- */
-void fsm_init __P((fsm *));
-void fsm_lowerup __P((fsm *));
-void fsm_lowerdown __P((fsm *));
-void fsm_open __P((fsm *));
-void fsm_close __P((fsm *, char *));
-void fsm_input __P((fsm *, u_char *, int));
-void fsm_protreject __P((fsm *));
-void fsm_sdata __P((fsm *, int, int, u_char *, int));
-
-
-/*
- * Variables
- */
-extern int peer_mru[]; /* currently negotiated peer MRU (per unit) */
diff --git a/mdk-stage1/ppp/pppd/ipcp.c b/mdk-stage1/ppp/pppd/ipcp.c
deleted file mode 100644
index 3f64357ed..000000000
--- a/mdk-stage1/ppp/pppd/ipcp.c
+++ /dev/null
@@ -1,2054 +0,0 @@
-/*
- * ipcp.c - PPP IP Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <netdb.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-#include "pathnames.h"
-
-static const char rcsid[] = RCSID;
-
-/* global vars */
-ipcp_options ipcp_wantoptions[NUM_PPP]; /* Options that we want to request */
-ipcp_options ipcp_gotoptions[NUM_PPP]; /* Options that peer ack'd */
-ipcp_options ipcp_allowoptions[NUM_PPP]; /* Options we allow peer to request */
-ipcp_options ipcp_hisoptions[NUM_PPP]; /* Options that we ack'd */
-
-u_int32_t netmask = 0; /* IP netmask to set on interface */
-
-bool disable_defaultip = 0; /* Don't use hostname for default IP adrs */
-
-/* Hook for a plugin to know when IP protocol has come up */
-void (*ip_up_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to know when IP protocol has come down */
-void (*ip_down_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to choose the remote IP address */
-void (*ip_choose_hook) __P((u_int32_t *)) = NULL;
-
-/* local vars */
-static int default_route_set[NUM_PPP]; /* Have set up a default route */
-static int proxy_arp_set[NUM_PPP]; /* Have created proxy arp entry */
-static bool usepeerdns; /* Ask peer for DNS addrs */
-static int ipcp_is_up; /* have called np_up() */
-static bool ask_for_local; /* request our address from peer */
-static char vj_value[8]; /* string form of vj option value */
-static char netmask_str[20]; /* string form of netmask value */
-
-/*
- * Callbacks for fsm code. (CI = Configuration Information)
- */
-static void ipcp_resetci __P((fsm *)); /* Reset our CI */
-static int ipcp_cilen __P((fsm *)); /* Return length of our CI */
-static void ipcp_addci __P((fsm *, u_char *, int *)); /* Add our CI */
-static int ipcp_ackci __P((fsm *, u_char *, int)); /* Peer ack'd our CI */
-static int ipcp_nakci __P((fsm *, u_char *, int)); /* Peer nak'd our CI */
-static int ipcp_rejci __P((fsm *, u_char *, int)); /* Peer rej'd our CI */
-static int ipcp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv CI */
-static void ipcp_up __P((fsm *)); /* We're UP */
-static void ipcp_down __P((fsm *)); /* We're DOWN */
-static void ipcp_finished __P((fsm *)); /* Don't need lower layer */
-
-fsm ipcp_fsm[NUM_PPP]; /* IPCP fsm structure */
-
-static fsm_callbacks ipcp_callbacks = { /* IPCP callback routines */
- ipcp_resetci, /* Reset our Configuration Information */
- ipcp_cilen, /* Length of our Configuration Information */
- ipcp_addci, /* Add our Configuration Information */
- ipcp_ackci, /* ACK our Configuration Information */
- ipcp_nakci, /* NAK our Configuration Information */
- ipcp_rejci, /* Reject our Configuration Information */
- ipcp_reqci, /* Request peer's Configuration Information */
- ipcp_up, /* Called when fsm reaches OPENED state */
- ipcp_down, /* Called when fsm leaves OPENED state */
- NULL, /* Called when we want the lower layer up */
- ipcp_finished, /* Called when we want the lower layer down */
- NULL, /* Called when Protocol-Reject received */
- NULL, /* Retransmission is necessary */
- NULL, /* Called to handle protocol-specific codes */
- "IPCP" /* String name of protocol */
-};
-
-/*
- * Command-line options.
- */
-static int setvjslots __P((char **));
-static int setdnsaddr __P((char **));
-static int setwinsaddr __P((char **));
-static int setnetmask __P((char **));
-static int setipaddr __P((char *, char **, int));
-static void printipaddr __P((option_t *, void (*)(void *, char *,...),void *));
-
-static option_t ipcp_option_list[] = {
- { "noip", o_bool, &ipcp_protent.enabled_flag,
- "Disable IP and IPCP" },
- { "-ip", o_bool, &ipcp_protent.enabled_flag,
- "Disable IP and IPCP", OPT_ALIAS },
-
- { "novj", o_bool, &ipcp_wantoptions[0].neg_vj,
- "Disable VJ compression", OPT_A2CLR, &ipcp_allowoptions[0].neg_vj },
- { "-vj", o_bool, &ipcp_wantoptions[0].neg_vj,
- "Disable VJ compression", OPT_ALIAS | OPT_A2CLR,
- &ipcp_allowoptions[0].neg_vj },
-
- { "novjccomp", o_bool, &ipcp_wantoptions[0].cflag,
- "Disable VJ connection-ID compression", OPT_A2CLR,
- &ipcp_allowoptions[0].cflag },
- { "-vjccomp", o_bool, &ipcp_wantoptions[0].cflag,
- "Disable VJ connection-ID compression", OPT_ALIAS | OPT_A2CLR,
- &ipcp_allowoptions[0].cflag },
-
- { "vj-max-slots", o_special, (void *)setvjslots,
- "Set maximum VJ header slots",
- OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, vj_value },
-
- { "ipcp-accept-local", o_bool, &ipcp_wantoptions[0].accept_local,
- "Accept peer's address for us", 1 },
- { "ipcp-accept-remote", o_bool, &ipcp_wantoptions[0].accept_remote,
- "Accept peer's address for it", 1 },
-
- { "ipparam", o_string, &ipparam,
- "Set ip script parameter", OPT_PRIO },
-
- { "noipdefault", o_bool, &disable_defaultip,
- "Don't use name for default IP adrs", 1 },
-
- { "ms-dns", 1, (void *)setdnsaddr,
- "DNS address for the peer's use" },
- { "ms-wins", 1, (void *)setwinsaddr,
- "Nameserver for SMB over TCP/IP for peer" },
-
- { "ipcp-restart", o_int, &ipcp_fsm[0].timeouttime,
- "Set timeout for IPCP", OPT_PRIO },
- { "ipcp-max-terminate", o_int, &ipcp_fsm[0].maxtermtransmits,
- "Set max #xmits for term-reqs", OPT_PRIO },
- { "ipcp-max-configure", o_int, &ipcp_fsm[0].maxconfreqtransmits,
- "Set max #xmits for conf-reqs", OPT_PRIO },
- { "ipcp-max-failure", o_int, &ipcp_fsm[0].maxnakloops,
- "Set max #conf-naks for IPCP", OPT_PRIO },
-
- { "defaultroute", o_bool, &ipcp_wantoptions[0].default_route,
- "Add default route", OPT_ENABLE|1, &ipcp_allowoptions[0].default_route },
- { "nodefaultroute", o_bool, &ipcp_allowoptions[0].default_route,
- "disable defaultroute option", OPT_A2CLR,
- &ipcp_wantoptions[0].default_route },
- { "-defaultroute", o_bool, &ipcp_allowoptions[0].default_route,
- "disable defaultroute option", OPT_ALIAS | OPT_A2CLR,
- &ipcp_wantoptions[0].default_route },
-
- { "proxyarp", o_bool, &ipcp_wantoptions[0].proxy_arp,
- "Add proxy ARP entry", OPT_ENABLE|1, &ipcp_allowoptions[0].proxy_arp },
- { "noproxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp,
- "disable proxyarp option", OPT_A2CLR,
- &ipcp_wantoptions[0].proxy_arp },
- { "-proxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp,
- "disable proxyarp option", OPT_ALIAS | OPT_A2CLR,
- &ipcp_wantoptions[0].proxy_arp },
-
- { "usepeerdns", o_bool, &usepeerdns,
- "Ask peer for DNS address(es)", 1 },
-
- { "netmask", o_special, (void *)setnetmask,
- "set netmask", OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, netmask_str },
-
- { "IP addresses", o_wild, (void *) &setipaddr,
- "set local and remote IP addresses",
- OPT_NOARG | OPT_A2PRINTER, (void *) &printipaddr },
-
- { NULL }
-};
-
-/*
- * Protocol entry points from main code.
- */
-static void ipcp_init __P((int));
-static void ipcp_open __P((int));
-static void ipcp_close __P((int, char *));
-static void ipcp_lowerup __P((int));
-static void ipcp_lowerdown __P((int));
-static void ipcp_input __P((int, u_char *, int));
-static void ipcp_protrej __P((int));
-static int ipcp_printpkt __P((u_char *, int,
- void (*) __P((void *, char *, ...)), void *));
-static void ip_check_options __P((void));
-static int ip_demand_conf __P((int));
-static int ip_active_pkt __P((u_char *, int));
-static void create_resolv __P((u_int32_t, u_int32_t));
-
-struct protent ipcp_protent = {
- PPP_IPCP,
- ipcp_init,
- ipcp_input,
- ipcp_protrej,
- ipcp_lowerup,
- ipcp_lowerdown,
- ipcp_open,
- ipcp_close,
- ipcp_printpkt,
- NULL,
- 1,
- "IPCP",
- "IP",
- ipcp_option_list,
- ip_check_options,
- ip_demand_conf,
- ip_active_pkt
-};
-
-static void ipcp_clear_addrs __P((int, u_int32_t, u_int32_t));
-static void ipcp_script __P((char *)); /* Run an up/down script */
-static void ipcp_script_done __P((void *));
-
-/*
- * Lengths of configuration options.
- */
-#define CILEN_VOID 2
-#define CILEN_COMPRESS 4 /* min length for compression protocol opt. */
-#define CILEN_VJ 6 /* length for RFC1332 Van-Jacobson opt. */
-#define CILEN_ADDR 6 /* new-style single address option */
-#define CILEN_ADDRS 10 /* old-style dual address option */
-
-
-#define CODENAME(x) ((x) == CONFACK ? "ACK" : \
- (x) == CONFNAK ? "NAK" : "REJ")
-
-/*
- * This state variable is used to ensure that we don't
- * run an ipcp-up/down script while one is already running.
- */
-static enum script_state {
- s_down,
- s_up,
-} ipcp_script_state;
-static pid_t ipcp_script_pid;
-
-/*
- * Make a string representation of a network IP address.
- */
-char *
-ip_ntoa(ipaddr)
-u_int32_t ipaddr;
-{
- static char b[64];
-
- slprintf(b, sizeof(b), "%I", ipaddr);
- return b;
-}
-
-/*
- * Option parsing.
- */
-
-/*
- * setvjslots - set maximum number of connection slots for VJ compression
- */
-static int
-setvjslots(argv)
- char **argv;
-{
- int value;
-
- if (!int_option(*argv, &value))
- return 0;
- if (value < 2 || value > 16) {
- option_error("vj-max-slots value must be between 2 and 16");
- return 0;
- }
- ipcp_wantoptions [0].maxslotindex =
- ipcp_allowoptions[0].maxslotindex = value - 1;
- slprintf(vj_value, sizeof(vj_value), "%d", value);
- return 1;
-}
-
-/*
- * setdnsaddr - set the dns address(es)
- */
-static int
-setdnsaddr(argv)
- char **argv;
-{
- u_int32_t dns;
- struct hostent *hp;
-
- dns = inet_addr(*argv);
- if (dns == (u_int32_t) -1) {
- if ((hp = gethostbyname(*argv)) == NULL) {
- option_error("invalid address parameter '%s' for ms-dns option",
- *argv);
- return 0;
- }
- dns = *(u_int32_t *)hp->h_addr;
- }
-
- /* We take the last 2 values given, the 2nd-last as the primary
- and the last as the secondary. If only one is given it
- becomes both primary and secondary. */
- if (ipcp_allowoptions[0].dnsaddr[1] == 0)
- ipcp_allowoptions[0].dnsaddr[0] = dns;
- else
- ipcp_allowoptions[0].dnsaddr[0] = ipcp_allowoptions[0].dnsaddr[1];
-
- /* always set the secondary address value. */
- ipcp_allowoptions[0].dnsaddr[1] = dns;
-
- return (1);
-}
-
-/*
- * setwinsaddr - set the wins address(es)
- * This is primrarly used with the Samba package under UNIX or for pointing
- * the caller to the existing WINS server on a Windows NT platform.
- */
-static int
-setwinsaddr(argv)
- char **argv;
-{
- u_int32_t wins;
- struct hostent *hp;
-
- wins = inet_addr(*argv);
- if (wins == (u_int32_t) -1) {
- if ((hp = gethostbyname(*argv)) == NULL) {
- option_error("invalid address parameter '%s' for ms-wins option",
- *argv);
- return 0;
- }
- wins = *(u_int32_t *)hp->h_addr;
- }
-
- /* We take the last 2 values given, the 2nd-last as the primary
- and the last as the secondary. If only one is given it
- becomes both primary and secondary. */
- if (ipcp_allowoptions[0].winsaddr[1] == 0)
- ipcp_allowoptions[0].winsaddr[0] = wins;
- else
- ipcp_allowoptions[0].winsaddr[0] = ipcp_allowoptions[0].winsaddr[1];
-
- /* always set the secondary address value. */
- ipcp_allowoptions[0].winsaddr[1] = wins;
-
- return (1);
-}
-
-/*
- * setipaddr - Set the IP address
- * If doit is 0, the call is to check whether this option is
- * potentially an IP address specification.
- */
-static int
-setipaddr(arg, argv, doit)
- char *arg;
- char **argv;
- int doit;
-{
- struct hostent *hp;
- char *colon;
- u_int32_t local, remote;
- ipcp_options *wo = &ipcp_wantoptions[0];
- static int prio_local = 0, prio_remote = 0;
-
- /*
- * IP address pair separated by ":".
- */
- if ((colon = strchr(arg, ':')) == NULL)
- return 0;
- if (!doit)
- return 1;
-
- /*
- * If colon first character, then no local addr.
- */
- if (colon != arg && option_priority >= prio_local) {
- *colon = '\0';
- if ((local = inet_addr(arg)) == (u_int32_t) -1) {
- if ((hp = gethostbyname(arg)) == NULL) {
- option_error("unknown host: %s", arg);
- return 0;
- }
- local = *(u_int32_t *)hp->h_addr;
- }
- if (bad_ip_adrs(local)) {
- option_error("bad local IP address %s", ip_ntoa(local));
- return 0;
- }
- if (local != 0)
- wo->ouraddr = local;
- *colon = ':';
- prio_local = option_priority;
- }
-
- /*
- * If colon last character, then no remote addr.
- */
- if (*++colon != '\0' && option_priority >= prio_remote) {
- if ((remote = inet_addr(colon)) == (u_int32_t) -1) {
- if ((hp = gethostbyname(colon)) == NULL) {
- option_error("unknown host: %s", colon);
- return 0;
- }
- remote = *(u_int32_t *)hp->h_addr;
- if (remote_name[0] == 0)
- strlcpy(remote_name, colon, sizeof(remote_name));
- }
- if (bad_ip_adrs(remote)) {
- option_error("bad remote IP address %s", ip_ntoa(remote));
- return 0;
- }
- if (remote != 0)
- wo->hisaddr = remote;
- prio_remote = option_priority;
- }
-
- return 1;
-}
-
-static void
-printipaddr(opt, printer, arg)
- option_t *opt;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- ipcp_options *wo = &ipcp_wantoptions[0];
-
- if (wo->ouraddr != 0)
- printer(arg, "%I", wo->ouraddr);
- printer(arg, ":");
- if (wo->hisaddr != 0)
- printer(arg, "%I", wo->hisaddr);
-}
-
-/*
- * setnetmask - set the netmask to be used on the interface.
- */
-static int
-setnetmask(argv)
- char **argv;
-{
- u_int32_t mask;
- int n;
- char *p;
-
- /*
- * Unfortunately, if we use inet_addr, we can't tell whether
- * a result of all 1s is an error or a valid 255.255.255.255.
- */
- p = *argv;
- n = parse_dotted_ip(p, &mask);
-
- mask = htonl(mask);
-
- if (n == 0 || p[n] != 0 || (netmask & ~mask) != 0) {
- option_error("invalid netmask value '%s'", *argv);
- return 0;
- }
-
- netmask = mask;
- slprintf(netmask_str, sizeof(netmask_str), "%I", mask);
-
- return (1);
-}
-
-int
-parse_dotted_ip(p, vp)
- char *p;
- u_int32_t *vp;
-{
- int n;
- u_int32_t v, b;
- char *endp, *p0 = p;
-
- v = 0;
- for (n = 3;; --n) {
- b = strtoul(p, &endp, 0);
- if (endp == p)
- return 0;
- if (b > 255) {
- if (n < 3)
- return 0;
- /* accept e.g. 0xffffff00 */
- *vp = b;
- return endp - p0;
- }
- v |= b << (n * 8);
- p = endp;
- if (n == 0)
- break;
- if (*p != '.')
- return 0;
- ++p;
- }
- *vp = v;
- return p - p0;
-}
-
-
-/*
- * ipcp_init - Initialize IPCP.
- */
-static void
-ipcp_init(unit)
- int unit;
-{
- fsm *f = &ipcp_fsm[unit];
- ipcp_options *wo = &ipcp_wantoptions[unit];
- ipcp_options *ao = &ipcp_allowoptions[unit];
-
- f->unit = unit;
- f->protocol = PPP_IPCP;
- f->callbacks = &ipcp_callbacks;
- fsm_init(&ipcp_fsm[unit]);
-
- memset(wo, 0, sizeof(*wo));
- memset(ao, 0, sizeof(*ao));
-
- wo->neg_addr = 1;
- wo->neg_vj = 1;
- wo->vj_protocol = IPCP_VJ_COMP;
- wo->maxslotindex = MAX_STATES - 1; /* really max index */
- wo->cflag = 1;
-
-
- /* max slots and slot-id compression are currently hardwired in */
- /* ppp_if.c to 16 and 1, this needs to be changed (among other */
- /* things) gmc */
-
- ao->neg_addr = 1;
- ao->neg_vj = 1;
- ao->maxslotindex = MAX_STATES - 1;
- ao->cflag = 1;
-
- /*
- * XXX These control whether the user may use the proxyarp
- * and defaultroute options.
- */
- ao->proxy_arp = 1;
- ao->default_route = 1;
-}
-
-
-/*
- * ipcp_open - IPCP is allowed to come up.
- */
-static void
-ipcp_open(unit)
- int unit;
-{
- fsm_open(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_close - Take IPCP down.
- */
-static void
-ipcp_close(unit, reason)
- int unit;
- char *reason;
-{
- fsm_close(&ipcp_fsm[unit], reason);
-}
-
-
-/*
- * ipcp_lowerup - The lower layer is up.
- */
-static void
-ipcp_lowerup(unit)
- int unit;
-{
- fsm_lowerup(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_lowerdown - The lower layer is down.
- */
-static void
-ipcp_lowerdown(unit)
- int unit;
-{
- fsm_lowerdown(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_input - Input IPCP packet.
- */
-static void
-ipcp_input(unit, p, len)
- int unit;
- u_char *p;
- int len;
-{
- fsm_input(&ipcp_fsm[unit], p, len);
-}
-
-
-/*
- * ipcp_protrej - A Protocol-Reject was received for IPCP.
- *
- * Pretend the lower layer went down, so we shut up.
- */
-static void
-ipcp_protrej(unit)
- int unit;
-{
- fsm_lowerdown(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_resetci - Reset our CI.
- * Called by fsm_sconfreq, Send Configure Request.
- */
-static void
-ipcp_resetci(f)
- fsm *f;
-{
- ipcp_options *wo = &ipcp_wantoptions[f->unit];
- ipcp_options *go = &ipcp_gotoptions[f->unit];
-
- wo->req_addr = wo->neg_addr && ipcp_allowoptions[f->unit].neg_addr;
- if (wo->ouraddr == 0)
- wo->accept_local = 1;
- if (wo->hisaddr == 0)
- wo->accept_remote = 1;
- wo->req_dns1 = usepeerdns; /* Request DNS addresses from the peer */
- wo->req_dns2 = usepeerdns;
- *go = *wo;
- if (!ask_for_local)
- go->ouraddr = 0;
- if (ip_choose_hook)
- ip_choose_hook(&wo->hisaddr);
-}
-
-
-/*
- * ipcp_cilen - Return length of our CI.
- * Called by fsm_sconfreq, Send Configure Request.
- */
-static int
-ipcp_cilen(f)
- fsm *f;
-{
- ipcp_options *go = &ipcp_gotoptions[f->unit];
- ipcp_options *wo = &ipcp_wantoptions[f->unit];
- ipcp_options *ho = &ipcp_hisoptions[f->unit];
-
-#define LENCIVJ(neg, old) (neg ? (old? CILEN_COMPRESS : CILEN_VJ) : 0)
-#define LENCIADDR(neg, old) (neg ? (old? CILEN_ADDRS : CILEN_ADDR) : 0)
-#define LENCIDNS(neg) (neg ? (CILEN_ADDR) : 0)
-
- /*
- * First see if we want to change our options to the old
- * forms because we have received old forms from the peer.
- */
- if (wo->neg_addr && !go->neg_addr && !go->old_addrs) {
- /* use the old style of address negotiation */
- go->neg_addr = 1;
- go->old_addrs = 1;
- }
- if (wo->neg_vj && !go->neg_vj && !go->old_vj) {
- /* try an older style of VJ negotiation */
- /* use the old style only if the peer did */
- if (ho->neg_vj && ho->old_vj) {
- go->neg_vj = 1;
- go->old_vj = 1;
- go->vj_protocol = ho->vj_protocol;
- }
- }
-
- return (LENCIADDR(go->neg_addr, go->old_addrs) +
- LENCIVJ(go->neg_vj, go->old_vj) +
- LENCIDNS(go->req_dns1) +
- LENCIDNS(go->req_dns2)) ;
-}
-
-
-/*
- * ipcp_addci - Add our desired CIs to a packet.
- * Called by fsm_sconfreq, Send Configure Request.
- */
-static void
-ipcp_addci(f, ucp, lenp)
- fsm *f;
- u_char *ucp;
- int *lenp;
-{
- ipcp_options *go = &ipcp_gotoptions[f->unit];
- int len = *lenp;
-
-#define ADDCIVJ(opt, neg, val, old, maxslotindex, cflag) \
- if (neg) { \
- int vjlen = old? CILEN_COMPRESS : CILEN_VJ; \
- if (len >= vjlen) { \
- PUTCHAR(opt, ucp); \
- PUTCHAR(vjlen, ucp); \
- PUTSHORT(val, ucp); \
- if (!old) { \
- PUTCHAR(maxslotindex, ucp); \
- PUTCHAR(cflag, ucp); \
- } \
- len -= vjlen; \
- } else \
- neg = 0; \
- }
-
-#define ADDCIADDR(opt, neg, old, val1, val2) \
- if (neg) { \
- int addrlen = (old? CILEN_ADDRS: CILEN_ADDR); \
- if (len >= addrlen) { \
- u_int32_t l; \
- PUTCHAR(opt, ucp); \
- PUTCHAR(addrlen, ucp); \
- l = ntohl(val1); \
- PUTLONG(l, ucp); \
- if (old) { \
- l = ntohl(val2); \
- PUTLONG(l, ucp); \
- } \
- len -= addrlen; \
- } else \
- neg = 0; \
- }
-
-#define ADDCIDNS(opt, neg, addr) \
- if (neg) { \
- if (len >= CILEN_ADDR) { \
- u_int32_t l; \
- PUTCHAR(opt, ucp); \
- PUTCHAR(CILEN_ADDR, ucp); \
- l = ntohl(addr); \
- PUTLONG(l, ucp); \
- len -= CILEN_ADDR; \
- } else \
- neg = 0; \
- }
-
- ADDCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), go->neg_addr,
- go->old_addrs, go->ouraddr, go->hisaddr);
-
- ADDCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol, go->old_vj,
- go->maxslotindex, go->cflag);
-
- ADDCIDNS(CI_MS_DNS1, go->req_dns1, go->dnsaddr[0]);
-
- ADDCIDNS(CI_MS_DNS2, go->req_dns2, go->dnsaddr[1]);
-
- *lenp -= len;
-}
-
-
-/*
- * ipcp_ackci - Ack our CIs.
- * Called by fsm_rconfack, Receive Configure ACK.
- *
- * Returns:
- * 0 - Ack was bad.
- * 1 - Ack was good.
- */
-static int
-ipcp_ackci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- ipcp_options *go = &ipcp_gotoptions[f->unit];
- u_short cilen, citype, cishort;
- u_int32_t cilong;
- u_char cimaxslotindex, cicflag;
-
- /*
- * CIs must be in exactly the same order that we sent...
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-
-#define ACKCIVJ(opt, neg, val, old, maxslotindex, cflag) \
- if (neg) { \
- int vjlen = old? CILEN_COMPRESS : CILEN_VJ; \
- if ((len -= vjlen) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != vjlen || \
- citype != opt) \
- goto bad; \
- GETSHORT(cishort, p); \
- if (cishort != val) \
- goto bad; \
- if (!old) { \
- GETCHAR(cimaxslotindex, p); \
- if (cimaxslotindex != maxslotindex) \
- goto bad; \
- GETCHAR(cicflag, p); \
- if (cicflag != cflag) \
- goto bad; \
- } \
- }
-
-#define ACKCIADDR(opt, neg, old, val1, val2) \
- if (neg) { \
- int addrlen = (old? CILEN_ADDRS: CILEN_ADDR); \
- u_int32_t l; \
- if ((len -= addrlen) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != addrlen || \
- citype != opt) \
- goto bad; \
- GETLONG(l, p); \
- cilong = htonl(l); \
- if (val1 != cilong) \
- goto bad; \
- if (old) { \
- GETLONG(l, p); \
- cilong = htonl(l); \
- if (val2 != cilong) \
- goto bad; \
- } \
- }
-
-#define ACKCIDNS(opt, neg, addr) \
- if (neg) { \
- u_int32_t l; \
- if ((len -= CILEN_ADDR) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_ADDR || citype != opt) \
- goto bad; \
- GETLONG(l, p); \
- cilong = htonl(l); \
- if (addr != cilong) \
- goto bad; \
- }
-
- ACKCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), go->neg_addr,
- go->old_addrs, go->ouraddr, go->hisaddr);
-
- ACKCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol, go->old_vj,
- go->maxslotindex, go->cflag);
-
- ACKCIDNS(CI_MS_DNS1, go->req_dns1, go->dnsaddr[0]);
-
- ACKCIDNS(CI_MS_DNS2, go->req_dns2, go->dnsaddr[1]);
-
- /*
- * If there are any remaining CIs, then this packet is bad.
- */
- if (len != 0)
- goto bad;
- return (1);
-
-bad:
- IPCPDEBUG(("ipcp_ackci: received bad Ack!"));
- return (0);
-}
-
-/*
- * ipcp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if IPCP is in the OPENED state.
- * Calback from fsm_rconfnakrej - Receive Configure-Nak or Configure-Reject.
- *
- * Returns:
- * 0 - Nak was bad.
- * 1 - Nak was good.
- */
-static int
-ipcp_nakci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- ipcp_options *go = &ipcp_gotoptions[f->unit];
- u_char cimaxslotindex, cicflag;
- u_char citype, cilen, *next;
- u_short cishort;
- u_int32_t ciaddr1, ciaddr2, l, cidnsaddr;
- ipcp_options no; /* options we've seen Naks for */
- ipcp_options try; /* options to request next time */
-
- BZERO(&no, sizeof(no));
- try = *go;
-
- /*
- * Any Nak'd CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-#define NAKCIADDR(opt, neg, old, code) \
- if (go->neg && \
- len >= (cilen = (old? CILEN_ADDRS: CILEN_ADDR)) && \
- p[1] == cilen && \
- p[0] == opt) { \
- len -= cilen; \
- INCPTR(2, p); \
- GETLONG(l, p); \
- ciaddr1 = htonl(l); \
- if (old) { \
- GETLONG(l, p); \
- ciaddr2 = htonl(l); \
- no.old_addrs = 1; \
- } else \
- ciaddr2 = 0; \
- no.neg = 1; \
- code \
- }
-
-#define NAKCIVJ(opt, neg, code) \
- if (go->neg && \
- ((cilen = p[1]) == CILEN_COMPRESS || cilen == CILEN_VJ) && \
- len >= cilen && \
- p[0] == opt) { \
- len -= cilen; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- no.neg = 1; \
- code \
- }
-
-#define NAKCIDNS(opt, neg, code) \
- if (go->neg && \
- ((cilen = p[1]) == CILEN_ADDR) && \
- len >= cilen && \
- p[0] == opt) { \
- len -= cilen; \
- INCPTR(2, p); \
- GETLONG(l, p); \
- cidnsaddr = htonl(l); \
- no.neg = 1; \
- code \
- }
-
- /*
- * Accept the peer's idea of {our,his} address, if different
- * from our idea, only if the accept_{local,remote} flag is set.
- */
- NAKCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), neg_addr, go->old_addrs,
- if (go->accept_local && ciaddr1) { /* Do we know our address? */
- try.ouraddr = ciaddr1;
- }
- if (go->accept_remote && ciaddr2) { /* Does he know his? */
- try.hisaddr = ciaddr2;
- }
- );
-
- /*
- * Accept the peer's value of maxslotindex provided that it
- * is less than what we asked for. Turn off slot-ID compression
- * if the peer wants. Send old-style compress-type option if
- * the peer wants.
- */
- NAKCIVJ(CI_COMPRESSTYPE, neg_vj,
- if (cilen == CILEN_VJ) {
- GETCHAR(cimaxslotindex, p);
- GETCHAR(cicflag, p);
- if (cishort == IPCP_VJ_COMP) {
- try.old_vj = 0;
- if (cimaxslotindex < go->maxslotindex)
- try.maxslotindex = cimaxslotindex;
- if (!cicflag)
- try.cflag = 0;
- } else {
- try.neg_vj = 0;
- }
- } else {
- if (cishort == IPCP_VJ_COMP || cishort == IPCP_VJ_COMP_OLD) {
- try.old_vj = 1;
- try.vj_protocol = cishort;
- } else {
- try.neg_vj = 0;
- }
- }
- );
-
- NAKCIDNS(CI_MS_DNS1, req_dns1,
- try.dnsaddr[0] = cidnsaddr;
- );
-
- NAKCIDNS(CI_MS_DNS2, req_dns2,
- try.dnsaddr[1] = cidnsaddr;
- );
-
- /*
- * There may be remaining CIs, if the peer is requesting negotiation
- * on an option that we didn't include in our request packet.
- * If they want to negotiate about IP addresses, we comply.
- * If they want us to ask for compression, we refuse.
- */
- while (len > CILEN_VOID) {
- GETCHAR(citype, p);
- GETCHAR(cilen, p);
- if( (len -= cilen) < 0 )
- goto bad;
- next = p + cilen - 2;
-
- switch (citype) {
- case CI_COMPRESSTYPE:
- if (go->neg_vj || no.neg_vj ||
- (cilen != CILEN_VJ && cilen != CILEN_COMPRESS))
- goto bad;
- no.neg_vj = 1;
- break;
- case CI_ADDRS:
- if ((go->neg_addr && go->old_addrs) || no.old_addrs
- || cilen != CILEN_ADDRS)
- goto bad;
- try.neg_addr = 1;
- try.old_addrs = 1;
- GETLONG(l, p);
- ciaddr1 = htonl(l);
- if (ciaddr1 && go->accept_local)
- try.ouraddr = ciaddr1;
- GETLONG(l, p);
- ciaddr2 = htonl(l);
- if (ciaddr2 && go->accept_remote)
- try.hisaddr = ciaddr2;
- no.old_addrs = 1;
- break;
- case CI_ADDR:
- if (go->neg_addr || no.neg_addr || cilen != CILEN_ADDR)
- goto bad;
- try.old_addrs = 0;
- GETLONG(l, p);
- ciaddr1 = htonl(l);
- if (ciaddr1 && go->accept_local)
- try.ouraddr = ciaddr1;
- if (try.ouraddr != 0)
- try.neg_addr = 1;
- no.neg_addr = 1;
- break;
- }
- p = next;
- }
-
- /*
- * OK, the Nak is good. Now we can update state.
- * If there are any remaining options, we ignore them.
- */
- if (f->state != OPENED)
- *go = try;
-
- return 1;
-
-bad:
- IPCPDEBUG(("ipcp_nakci: received bad Nak!"));
- return 0;
-}
-
-
-/*
- * ipcp_rejci - Reject some of our CIs.
- * Callback from fsm_rconfnakrej.
- */
-static int
-ipcp_rejci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- ipcp_options *go = &ipcp_gotoptions[f->unit];
- u_char cimaxslotindex, ciflag, cilen;
- u_short cishort;
- u_int32_t cilong;
- ipcp_options try; /* options to request next time */
-
- try = *go;
- /*
- * Any Rejected CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-#define REJCIADDR(opt, neg, old, val1, val2) \
- if (go->neg && \
- len >= (cilen = old? CILEN_ADDRS: CILEN_ADDR) && \
- p[1] == cilen && \
- p[0] == opt) { \
- u_int32_t l; \
- len -= cilen; \
- INCPTR(2, p); \
- GETLONG(l, p); \
- cilong = htonl(l); \
- /* Check rejected value. */ \
- if (cilong != val1) \
- goto bad; \
- if (old) { \
- GETLONG(l, p); \
- cilong = htonl(l); \
- /* Check rejected value. */ \
- if (cilong != val2) \
- goto bad; \
- } \
- try.neg = 0; \
- }
-
-#define REJCIVJ(opt, neg, val, old, maxslot, cflag) \
- if (go->neg && \
- p[1] == (old? CILEN_COMPRESS : CILEN_VJ) && \
- len >= p[1] && \
- p[0] == opt) { \
- len -= p[1]; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- /* Check rejected value. */ \
- if (cishort != val) \
- goto bad; \
- if (!old) { \
- GETCHAR(cimaxslotindex, p); \
- if (cimaxslotindex != maxslot) \
- goto bad; \
- GETCHAR(ciflag, p); \
- if (ciflag != cflag) \
- goto bad; \
- } \
- try.neg = 0; \
- }
-
-#define REJCIDNS(opt, neg, dnsaddr) \
- if (go->neg && \
- ((cilen = p[1]) == CILEN_ADDR) && \
- len >= cilen && \
- p[0] == opt) { \
- u_int32_t l; \
- len -= cilen; \
- INCPTR(2, p); \
- GETLONG(l, p); \
- cilong = htonl(l); \
- /* Check rejected value. */ \
- if (cilong != dnsaddr) \
- goto bad; \
- try.neg = 0; \
- }
-
-
- REJCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), neg_addr,
- go->old_addrs, go->ouraddr, go->hisaddr);
-
- REJCIVJ(CI_COMPRESSTYPE, neg_vj, go->vj_protocol, go->old_vj,
- go->maxslotindex, go->cflag);
-
- REJCIDNS(CI_MS_DNS1, req_dns1, go->dnsaddr[0]);
-
- REJCIDNS(CI_MS_DNS2, req_dns2, go->dnsaddr[1]);
-
- /*
- * If there are any remaining CIs, then this packet is bad.
- */
- if (len != 0)
- goto bad;
- /*
- * Now we can update state.
- */
- if (f->state != OPENED)
- *go = try;
- return 1;
-
-bad:
- IPCPDEBUG(("ipcp_rejci: received bad Reject!"));
- return 0;
-}
-
-
-/*
- * ipcp_reqci - Check the peer's requested CIs and send appropriate response.
- * Callback from fsm_rconfreq, Receive Configure Request
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately. If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-ipcp_reqci(f, inp, len, reject_if_disagree)
- fsm *f;
- u_char *inp; /* Requested CIs */
- int *len; /* Length of requested CIs */
- int reject_if_disagree;
-{
- ipcp_options *wo = &ipcp_wantoptions[f->unit];
- ipcp_options *ho = &ipcp_hisoptions[f->unit];
- ipcp_options *ao = &ipcp_allowoptions[f->unit];
- ipcp_options *go = &ipcp_gotoptions[f->unit];
- u_char *cip, *next; /* Pointer to current and next CIs */
- u_short cilen, citype; /* Parsed len, type */
- u_short cishort; /* Parsed short value */
- u_int32_t tl, ciaddr1, ciaddr2;/* Parsed address values */
- int rc = CONFACK; /* Final packet return code */
- int orc; /* Individual option return code */
- u_char *p; /* Pointer to next char to parse */
- u_char *ucp = inp; /* Pointer to current output char */
- int l = *len; /* Length left */
- u_char maxslotindex, cflag;
- int d;
-
- /*
- * Reset all his options.
- */
- BZERO(ho, sizeof(*ho));
-
- /*
- * Process all his options.
- */
- next = inp;
- while (l) {
- orc = CONFACK; /* Assume success */
- cip = p = next; /* Remember begining of CI */
- if (l < 2 || /* Not enough data for CI header or */
- p[1] < 2 || /* CI length too small or */
- p[1] > l) { /* CI length too big? */
- IPCPDEBUG(("ipcp_reqci: bad CI length!"));
- orc = CONFREJ; /* Reject bad CI */
- cilen = l; /* Reject till end of packet */
- l = 0; /* Don't loop again */
- goto endswitch;
- }
- GETCHAR(citype, p); /* Parse CI type */
- GETCHAR(cilen, p); /* Parse CI length */
- l -= cilen; /* Adjust remaining length */
- next += cilen; /* Step to next CI */
-
- switch (citype) { /* Check CI type */
- case CI_ADDRS:
- if (!ao->neg_addr ||
- cilen != CILEN_ADDRS) { /* Check CI length */
- orc = CONFREJ; /* Reject CI */
- break;
- }
-
- /*
- * If he has no address, or if we both have his address but
- * disagree about it, then NAK it with our idea.
- * In particular, if we don't know his address, but he does,
- * then accept it.
- */
- GETLONG(tl, p); /* Parse source address (his) */
- ciaddr1 = htonl(tl);
- if (ciaddr1 != wo->hisaddr
- && (ciaddr1 == 0 || !wo->accept_remote)) {
- orc = CONFNAK;
- if (!reject_if_disagree) {
- DECPTR(sizeof(u_int32_t), p);
- tl = ntohl(wo->hisaddr);
- PUTLONG(tl, p);
- }
- } else if (ciaddr1 == 0 && wo->hisaddr == 0) {
- /*
- * If neither we nor he knows his address, reject the option.
- */
- orc = CONFREJ;
- wo->req_addr = 0; /* don't NAK with 0.0.0.0 later */
- break;
- }
-
- /*
- * If he doesn't know our address, or if we both have our address
- * but disagree about it, then NAK it with our idea.
- */
- GETLONG(tl, p); /* Parse desination address (ours) */
- ciaddr2 = htonl(tl);
- if (ciaddr2 != wo->ouraddr) {
- if (ciaddr2 == 0 || !wo->accept_local) {
- orc = CONFNAK;
- if (!reject_if_disagree) {
- DECPTR(sizeof(u_int32_t), p);
- tl = ntohl(wo->ouraddr);
- PUTLONG(tl, p);
- }
- } else {
- go->ouraddr = ciaddr2; /* accept peer's idea */
- }
- }
-
- ho->neg_addr = 1;
- ho->old_addrs = 1;
- ho->hisaddr = ciaddr1;
- ho->ouraddr = ciaddr2;
- break;
-
- case CI_ADDR:
- if (!ao->neg_addr ||
- cilen != CILEN_ADDR) { /* Check CI length */
- orc = CONFREJ; /* Reject CI */
- break;
- }
-
- /*
- * If he has no address, or if we both have his address but
- * disagree about it, then NAK it with our idea.
- * In particular, if we don't know his address, but he does,
- * then accept it.
- */
- GETLONG(tl, p); /* Parse source address (his) */
- ciaddr1 = htonl(tl);
- if (ciaddr1 != wo->hisaddr
- && (ciaddr1 == 0 || !wo->accept_remote)) {
- orc = CONFNAK;
- if (!reject_if_disagree) {
- DECPTR(sizeof(u_int32_t), p);
- tl = ntohl(wo->hisaddr);
- PUTLONG(tl, p);
- }
- } else if (ciaddr1 == 0 && wo->hisaddr == 0) {
- /*
- * Don't ACK an address of 0.0.0.0 - reject it instead.
- */
- orc = CONFREJ;
- wo->req_addr = 0; /* don't NAK with 0.0.0.0 later */
- break;
- }
-
- ho->neg_addr = 1;
- ho->hisaddr = ciaddr1;
- break;
-
- case CI_MS_DNS1:
- case CI_MS_DNS2:
- /* Microsoft primary or secondary DNS request */
- d = citype == CI_MS_DNS2;
-
- /* If we do not have a DNS address then we cannot send it */
- if (ao->dnsaddr[d] == 0 ||
- cilen != CILEN_ADDR) { /* Check CI length */
- orc = CONFREJ; /* Reject CI */
- break;
- }
- GETLONG(tl, p);
- if (htonl(tl) != ao->dnsaddr[d]) {
- DECPTR(sizeof(u_int32_t), p);
- tl = ntohl(ao->dnsaddr[d]);
- PUTLONG(tl, p);
- orc = CONFNAK;
- }
- break;
-
- case CI_MS_WINS1:
- case CI_MS_WINS2:
- /* Microsoft primary or secondary WINS request */
- d = citype == CI_MS_WINS2;
-
- /* If we do not have a DNS address then we cannot send it */
- if (ao->winsaddr[d] == 0 ||
- cilen != CILEN_ADDR) { /* Check CI length */
- orc = CONFREJ; /* Reject CI */
- break;
- }
- GETLONG(tl, p);
- if (htonl(tl) != ao->winsaddr[d]) {
- DECPTR(sizeof(u_int32_t), p);
- tl = ntohl(ao->winsaddr[d]);
- PUTLONG(tl, p);
- orc = CONFNAK;
- }
- break;
-
- case CI_COMPRESSTYPE:
- if (!ao->neg_vj ||
- (cilen != CILEN_VJ && cilen != CILEN_COMPRESS)) {
- orc = CONFREJ;
- break;
- }
- GETSHORT(cishort, p);
-
- if (!(cishort == IPCP_VJ_COMP ||
- (cishort == IPCP_VJ_COMP_OLD && cilen == CILEN_COMPRESS))) {
- orc = CONFREJ;
- break;
- }
-
- ho->neg_vj = 1;
- ho->vj_protocol = cishort;
- if (cilen == CILEN_VJ) {
- GETCHAR(maxslotindex, p);
- if (maxslotindex > ao->maxslotindex) {
- orc = CONFNAK;
- if (!reject_if_disagree){
- DECPTR(1, p);
- PUTCHAR(ao->maxslotindex, p);
- }
- }
- GETCHAR(cflag, p);
- if (cflag && !ao->cflag) {
- orc = CONFNAK;
- if (!reject_if_disagree){
- DECPTR(1, p);
- PUTCHAR(wo->cflag, p);
- }
- }
- ho->maxslotindex = maxslotindex;
- ho->cflag = cflag;
- } else {
- ho->old_vj = 1;
- ho->maxslotindex = MAX_STATES - 1;
- ho->cflag = 1;
- }
- break;
-
- default:
- orc = CONFREJ;
- break;
- }
-endswitch:
- if (orc == CONFACK && /* Good CI */
- rc != CONFACK) /* but prior CI wasnt? */
- continue; /* Don't send this one */
-
- if (orc == CONFNAK) { /* Nak this CI? */
- if (reject_if_disagree) /* Getting fed up with sending NAKs? */
- orc = CONFREJ; /* Get tough if so */
- else {
- if (rc == CONFREJ) /* Rejecting prior CI? */
- continue; /* Don't send this one */
- if (rc == CONFACK) { /* Ack'd all prior CIs? */
- rc = CONFNAK; /* Not anymore... */
- ucp = inp; /* Backup */
- }
- }
- }
-
- if (orc == CONFREJ && /* Reject this CI */
- rc != CONFREJ) { /* but no prior ones? */
- rc = CONFREJ;
- ucp = inp; /* Backup */
- }
-
- /* Need to move CI? */
- if (ucp != cip)
- BCOPY(cip, ucp, cilen); /* Move it */
-
- /* Update output pointer */
- INCPTR(cilen, ucp);
- }
-
- /*
- * If we aren't rejecting this packet, and we want to negotiate
- * their address, and they didn't send their address, then we
- * send a NAK with a CI_ADDR option appended. We assume the
- * input buffer is long enough that we can append the extra
- * option safely.
- */
- if (rc != CONFREJ && !ho->neg_addr &&
- wo->req_addr && !reject_if_disagree) {
- if (rc == CONFACK) {
- rc = CONFNAK;
- ucp = inp; /* reset pointer */
- wo->req_addr = 0; /* don't ask again */
- }
- PUTCHAR(CI_ADDR, ucp);
- PUTCHAR(CILEN_ADDR, ucp);
- tl = ntohl(wo->hisaddr);
- PUTLONG(tl, ucp);
- }
-
- *len = ucp - inp; /* Compute output length */
- IPCPDEBUG(("ipcp: returning Configure-%s", CODENAME(rc)));
- return (rc); /* Return final code */
-}
-
-
-/*
- * ip_check_options - check that any IP-related options are OK,
- * and assign appropriate defaults.
- */
-static void
-ip_check_options()
-{
- struct hostent *hp;
- u_int32_t local;
- ipcp_options *wo = &ipcp_wantoptions[0];
-
- /*
- * Default our local IP address based on our hostname.
- * If local IP address already given, don't bother.
- */
- if (wo->ouraddr == 0 && !disable_defaultip) {
- /*
- * Look up our hostname (possibly with domain name appended)
- * and take the first IP address as our local IP address.
- * If there isn't an IP address for our hostname, too bad.
- */
- wo->accept_local = 1; /* don't insist on this default value */
- if ((hp = gethostbyname(hostname)) != NULL) {
- local = *(u_int32_t *)hp->h_addr;
- if (local != 0 && !bad_ip_adrs(local))
- wo->ouraddr = local;
- }
- }
- ask_for_local = wo->ouraddr != 0 || !disable_defaultip;
-}
-
-
-/*
- * ip_demand_conf - configure the interface as though
- * IPCP were up, for use with dial-on-demand.
- */
-static int
-ip_demand_conf(u)
- int u;
-{
- ipcp_options *wo = &ipcp_wantoptions[u];
-
- if (wo->hisaddr == 0) {
- /* make up an arbitrary address for the peer */
- wo->hisaddr = htonl(0x0a707070 + ifunit);
- wo->accept_remote = 1;
- }
- if (wo->ouraddr == 0) {
- /* make up an arbitrary address for us */
- wo->ouraddr = htonl(0x0a404040 + ifunit);
- wo->accept_local = 1;
- ask_for_local = 0; /* don't tell the peer this address */
- }
- if (!sifaddr(u, wo->ouraddr, wo->hisaddr, GetMask(wo->ouraddr)))
- return 0;
- if (!sifup(u))
- return 0;
- if (!sifnpmode(u, PPP_IP, NPMODE_QUEUE))
- return 0;
- if (wo->default_route)
- if (sifdefaultroute(u, wo->ouraddr, wo->hisaddr))
- default_route_set[u] = 1;
- if (wo->proxy_arp)
- if (sifproxyarp(u, wo->hisaddr))
- proxy_arp_set[u] = 1;
-
- notice("local IP address %I", wo->ouraddr);
- notice("remote IP address %I", wo->hisaddr);
-
- return 1;
-}
-
-
-/*
- * ipcp_up - IPCP has come UP.
- *
- * Configure the IP network interface appropriately and bring it up.
- */
-static void
-ipcp_up(f)
- fsm *f;
-{
- u_int32_t mask;
- ipcp_options *ho = &ipcp_hisoptions[f->unit];
- ipcp_options *go = &ipcp_gotoptions[f->unit];
- ipcp_options *wo = &ipcp_wantoptions[f->unit];
-
- IPCPDEBUG(("ipcp: up"));
-
- /*
- * We must have a non-zero IP address for both ends of the link.
- */
- if (!ho->neg_addr)
- ho->hisaddr = wo->hisaddr;
-
- if (go->ouraddr == 0) {
- error("Could not determine local IP address");
- ipcp_close(f->unit, "Could not determine local IP address");
- return;
- }
- if (ho->hisaddr == 0) {
- ho->hisaddr = htonl(0x0a404040 + ifunit);
- warn("Could not determine remote IP address: defaulting to %I",
- ho->hisaddr);
- }
- script_setenv("IPLOCAL", ip_ntoa(go->ouraddr), 0);
- script_setenv("IPREMOTE", ip_ntoa(ho->hisaddr), 1);
-
- if (usepeerdns && (go->dnsaddr[0] || go->dnsaddr[1])) {
- script_setenv("USEPEERDNS", "1", 0);
- if (go->dnsaddr[0])
- script_setenv("DNS1", ip_ntoa(go->dnsaddr[0]), 0);
- if (go->dnsaddr[1])
- script_setenv("DNS2", ip_ntoa(go->dnsaddr[1]), 0);
- create_resolv(go->dnsaddr[0], go->dnsaddr[1]);
- }
-
- /*
- * Check that the peer is allowed to use the IP address it wants.
- */
- if (!auth_ip_addr(f->unit, ho->hisaddr)) {
- error("Peer is not authorized to use remote address %I", ho->hisaddr);
- ipcp_close(f->unit, "Unauthorized remote IP address");
- return;
- }
-
- /* set tcp compression */
- sifvjcomp(f->unit, ho->neg_vj, ho->cflag, ho->maxslotindex);
-
- /*
- * If we are doing dial-on-demand, the interface is already
- * configured, so we put out any saved-up packets, then set the
- * interface to pass IP packets.
- */
- if (demand) {
- if (go->ouraddr != wo->ouraddr || ho->hisaddr != wo->hisaddr) {
- ipcp_clear_addrs(f->unit, wo->ouraddr, wo->hisaddr);
- if (go->ouraddr != wo->ouraddr) {
- warn("Local IP address changed to %I", go->ouraddr);
- script_setenv("OLDIPLOCAL", ip_ntoa(wo->ouraddr), 0);
- wo->ouraddr = go->ouraddr;
- } else
- script_unsetenv("OLDIPLOCAL");
- if (ho->hisaddr != wo->hisaddr) {
- warn("Remote IP address changed to %I", ho->hisaddr);
- script_setenv("OLDIPREMOTE", ip_ntoa(wo->hisaddr), 0);
- wo->hisaddr = ho->hisaddr;
- } else
- script_unsetenv("OLDIPREMOTE");
-
- /* Set the interface to the new addresses */
- mask = GetMask(go->ouraddr);
- if (!sifaddr(f->unit, go->ouraddr, ho->hisaddr, mask)) {
- if (debug)
- warn("Interface configuration failed");
- ipcp_close(f->unit, "Interface configuration failed");
- return;
- }
-
- /* assign a default route through the interface if required */
- if (ipcp_wantoptions[f->unit].default_route)
- if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
- default_route_set[f->unit] = 1;
-
- /* Make a proxy ARP entry if requested. */
- if (ipcp_wantoptions[f->unit].proxy_arp)
- if (sifproxyarp(f->unit, ho->hisaddr))
- proxy_arp_set[f->unit] = 1;
-
- }
- demand_rexmit(PPP_IP);
- sifnpmode(f->unit, PPP_IP, NPMODE_PASS);
-
- } else {
- /*
- * Set IP addresses and (if specified) netmask.
- */
- mask = GetMask(go->ouraddr);
-
-#if !(defined(SVR4) && (defined(SNI) || defined(__USLC__)))
- if (!sifaddr(f->unit, go->ouraddr, ho->hisaddr, mask)) {
- if (debug)
- warn("Interface configuration failed");
- ipcp_close(f->unit, "Interface configuration failed");
- return;
- }
-#endif
-
- /* bring the interface up for IP */
- if (!sifup(f->unit)) {
- if (debug)
- warn("Interface failed to come up");
- ipcp_close(f->unit, "Interface configuration failed");
- return;
- }
-
-#if (defined(SVR4) && (defined(SNI) || defined(__USLC__)))
- if (!sifaddr(f->unit, go->ouraddr, ho->hisaddr, mask)) {
- if (debug)
- warn("Interface configuration failed");
- ipcp_close(f->unit, "Interface configuration failed");
- return;
- }
-#endif
- sifnpmode(f->unit, PPP_IP, NPMODE_PASS);
-
- /* assign a default route through the interface if required */
- if (ipcp_wantoptions[f->unit].default_route)
- if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
- default_route_set[f->unit] = 1;
-
- /* Make a proxy ARP entry if requested. */
- if (ipcp_wantoptions[f->unit].proxy_arp)
- if (sifproxyarp(f->unit, ho->hisaddr))
- proxy_arp_set[f->unit] = 1;
-
- ipcp_wantoptions[0].ouraddr = go->ouraddr;
-
- notice("local IP address %I", go->ouraddr);
- notice("remote IP address %I", ho->hisaddr);
- if (go->dnsaddr[0])
- notice("primary DNS address %I", go->dnsaddr[0]);
- if (go->dnsaddr[1])
- notice("secondary DNS address %I", go->dnsaddr[1]);
- }
-
- np_up(f->unit, PPP_IP);
- ipcp_is_up = 1;
-
- if (ip_up_hook)
- ip_up_hook();
-
- /*
- * Execute the ip-up script, like this:
- * /etc/ppp/ip-up interface tty speed local-IP remote-IP
- */
- if (ipcp_script_state == s_down && ipcp_script_pid == 0) {
- ipcp_script_state = s_up;
- ipcp_script(_PATH_IPUP);
- }
-}
-
-
-/*
- * ipcp_down - IPCP has gone DOWN.
- *
- * Take the IP network interface down, clear its addresses
- * and delete routes through it.
- */
-static void
-ipcp_down(f)
- fsm *f;
-{
- IPCPDEBUG(("ipcp: down"));
- /* XXX a bit IPv4-centric here, we only need to get the stats
- * before the interface is marked down. */
- update_link_stats(f->unit);
- if (ip_down_hook)
- ip_down_hook();
- if (ipcp_is_up) {
- ipcp_is_up = 0;
- np_down(f->unit, PPP_IP);
- }
- sifvjcomp(f->unit, 0, 0, 0);
-
- /*
- * If we are doing dial-on-demand, set the interface
- * to queue up outgoing packets (for now).
- */
- if (demand) {
- sifnpmode(f->unit, PPP_IP, NPMODE_QUEUE);
- } else {
- sifnpmode(f->unit, PPP_IP, NPMODE_DROP);
- sifdown(f->unit);
- ipcp_clear_addrs(f->unit, ipcp_gotoptions[f->unit].ouraddr,
- ipcp_hisoptions[f->unit].hisaddr);
- }
-
- /* Execute the ip-down script */
- if (ipcp_script_state == s_up && ipcp_script_pid == 0) {
- ipcp_script_state = s_down;
- ipcp_script(_PATH_IPDOWN);
- }
-}
-
-
-/*
- * ipcp_clear_addrs() - clear the interface addresses, routes,
- * proxy arp entries, etc.
- */
-static void
-ipcp_clear_addrs(unit, ouraddr, hisaddr)
- int unit;
- u_int32_t ouraddr; /* local address */
- u_int32_t hisaddr; /* remote address */
-{
- if (proxy_arp_set[unit]) {
- cifproxyarp(unit, hisaddr);
- proxy_arp_set[unit] = 0;
- }
- if (default_route_set[unit]) {
- cifdefaultroute(unit, ouraddr, hisaddr);
- default_route_set[unit] = 0;
- }
- cifaddr(unit, ouraddr, hisaddr);
-}
-
-
-/*
- * ipcp_finished - possibly shut down the lower layers.
- */
-static void
-ipcp_finished(f)
- fsm *f;
-{
- np_finished(f->unit, PPP_IP);
-}
-
-
-/*
- * ipcp_script_done - called when the ip-up or ip-down script
- * has finished.
- */
-static void
-ipcp_script_done(arg)
- void *arg;
-{
- ipcp_script_pid = 0;
- switch (ipcp_script_state) {
- case s_up:
- if (ipcp_fsm[0].state != OPENED) {
- ipcp_script_state = s_down;
- ipcp_script(_PATH_IPDOWN);
- }
- break;
- case s_down:
- if (ipcp_fsm[0].state == OPENED) {
- ipcp_script_state = s_up;
- ipcp_script(_PATH_IPUP);
- }
- break;
- }
-}
-
-
-/*
- * ipcp_script - Execute a script with arguments
- * interface-name tty-name speed local-IP remote-IP.
- */
-static void
-ipcp_script(script)
- char *script;
-{
- char strspeed[32], strlocal[32], strremote[32];
- char *argv[8];
-
- slprintf(strspeed, sizeof(strspeed), "%d", baud_rate);
- slprintf(strlocal, sizeof(strlocal), "%I", ipcp_gotoptions[0].ouraddr);
- slprintf(strremote, sizeof(strremote), "%I", ipcp_hisoptions[0].hisaddr);
-
- argv[0] = script;
- argv[1] = ifname;
- argv[2] = devnam;
- argv[3] = strspeed;
- argv[4] = strlocal;
- argv[5] = strremote;
- argv[6] = ipparam;
- argv[7] = NULL;
- ipcp_script_pid = run_program(script, argv, 0, ipcp_script_done, NULL);
-}
-
-/*
- * create_resolv - create the replacement resolv.conf file
- */
-static void
-create_resolv(peerdns1, peerdns2)
- u_int32_t peerdns1, peerdns2;
-{
- FILE *f;
-
- f = fopen(_PATH_RESOLV, "w");
- if (f == NULL) {
- error("Failed to create %s: %m", _PATH_RESOLV);
- return;
- }
-
- if (peerdns1)
- fprintf(f, "nameserver %s\n", ip_ntoa(peerdns1));
-
- if (peerdns2)
- fprintf(f, "nameserver %s\n", ip_ntoa(peerdns2));
-
- if (ferror(f))
- error("Write failed to %s: %m", _PATH_RESOLV);
-
- fclose(f);
-}
-
-/*
- * ipcp_printpkt - print the contents of an IPCP packet.
- */
-static char *ipcp_codenames[] = {
- "ConfReq", "ConfAck", "ConfNak", "ConfRej",
- "TermReq", "TermAck", "CodeRej"
-};
-
-static int
-ipcp_printpkt(p, plen, printer, arg)
- u_char *p;
- int plen;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int code, id, len, olen;
- u_char *pstart, *optend;
- u_short cishort;
- u_int32_t cilong;
-
- if (plen < HEADERLEN)
- return 0;
- pstart = p;
- GETCHAR(code, p);
- GETCHAR(id, p);
- GETSHORT(len, p);
- if (len < HEADERLEN || len > plen)
- return 0;
-
- if (code >= 1 && code <= sizeof(ipcp_codenames) / sizeof(char *))
- printer(arg, " %s", ipcp_codenames[code-1]);
- else
- printer(arg, " code=0x%x", code);
- printer(arg, " id=0x%x", id);
- len -= HEADERLEN;
- switch (code) {
- case CONFREQ:
- case CONFACK:
- case CONFNAK:
- case CONFREJ:
- /* print option list */
- while (len >= 2) {
- GETCHAR(code, p);
- GETCHAR(olen, p);
- p -= 2;
- if (olen < 2 || olen > len) {
- break;
- }
- printer(arg, " <");
- len -= olen;
- optend = p + olen;
- switch (code) {
- case CI_ADDRS:
- if (olen == CILEN_ADDRS) {
- p += 2;
- GETLONG(cilong, p);
- printer(arg, "addrs %I", htonl(cilong));
- GETLONG(cilong, p);
- printer(arg, " %I", htonl(cilong));
- }
- break;
- case CI_COMPRESSTYPE:
- if (olen >= CILEN_COMPRESS) {
- p += 2;
- GETSHORT(cishort, p);
- printer(arg, "compress ");
- switch (cishort) {
- case IPCP_VJ_COMP:
- printer(arg, "VJ");
- break;
- case IPCP_VJ_COMP_OLD:
- printer(arg, "old-VJ");
- break;
- default:
- printer(arg, "0x%x", cishort);
- }
- }
- break;
- case CI_ADDR:
- if (olen == CILEN_ADDR) {
- p += 2;
- GETLONG(cilong, p);
- printer(arg, "addr %I", htonl(cilong));
- }
- break;
- case CI_MS_DNS1:
- case CI_MS_DNS2:
- p += 2;
- GETLONG(cilong, p);
- printer(arg, "ms-dns%d %I", code - CI_MS_DNS1 + 1,
- htonl(cilong));
- break;
- case CI_MS_WINS1:
- case CI_MS_WINS2:
- p += 2;
- GETLONG(cilong, p);
- printer(arg, "ms-wins %I", htonl(cilong));
- break;
- }
- while (p < optend) {
- GETCHAR(code, p);
- printer(arg, " %.2x", code);
- }
- printer(arg, ">");
- }
- break;
-
- case TERMACK:
- case TERMREQ:
- if (len > 0 && *p >= ' ' && *p < 0x7f) {
- printer(arg, " ");
- print_string((char *)p, len, printer, arg);
- p += len;
- len = 0;
- }
- break;
- }
-
- /* print the rest of the bytes in the packet */
- for (; len > 0; --len) {
- GETCHAR(code, p);
- printer(arg, " %.2x", code);
- }
-
- return p - pstart;
-}
-
-/*
- * ip_active_pkt - see if this IP packet is worth bringing the link up for.
- * We don't bring the link up for IP fragments or for TCP FIN packets
- * with no data.
- */
-#define IP_HDRLEN 20 /* bytes */
-#define IP_OFFMASK 0x1fff
-// #define IPPROTO_TCP 6
-#define TCP_HDRLEN 20
-#define TH_FIN 0x01
-
-/*
- * We use these macros because the IP header may be at an odd address,
- * and some compilers might use word loads to get th_off or ip_hl.
- */
-
-#define net_short(x) (((x)[0] << 8) + (x)[1])
-#define get_iphl(x) (((unsigned char *)(x))[0] & 0xF)
-#define get_ipoff(x) net_short((unsigned char *)(x) + 6)
-#define get_ipproto(x) (((unsigned char *)(x))[9])
-#define get_tcpoff(x) (((unsigned char *)(x))[12] >> 4)
-#define get_tcpflags(x) (((unsigned char *)(x))[13])
-
-static int
-ip_active_pkt(pkt, len)
- u_char *pkt;
- int len;
-{
- u_char *tcp;
- int hlen;
-
- len -= PPP_HDRLEN;
- pkt += PPP_HDRLEN;
- if (len < IP_HDRLEN)
- return 0;
- if ((get_ipoff(pkt) & IP_OFFMASK) != 0)
- return 0;
- if (get_ipproto(pkt) != IPPROTO_TCP)
- return 1;
- hlen = get_iphl(pkt) * 4;
- if (len < hlen + TCP_HDRLEN)
- return 0;
- tcp = pkt + hlen;
- if ((get_tcpflags(tcp) & TH_FIN) != 0 && len == hlen + get_tcpoff(tcp) * 4)
- return 0;
- return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/ipcp.h b/mdk-stage1/ppp/pppd/ipcp.h
deleted file mode 100644
index 8c5aca861..000000000
--- a/mdk-stage1/ppp/pppd/ipcp.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * ipcp.h - IP Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define CI_ADDRS 1 /* IP Addresses */
-#define CI_COMPRESSTYPE 2 /* Compression Type */
-#define CI_ADDR 3
-
-#define CI_MS_DNS1 129 /* Primary DNS value */
-#define CI_MS_WINS1 130 /* Primary WINS value */
-#define CI_MS_DNS2 131 /* Secondary DNS value */
-#define CI_MS_WINS2 132 /* Secondary WINS value */
-
-#define MAX_STATES 16 /* from slcompress.h */
-
-#define IPCP_VJMODE_OLD 1 /* "old" mode (option # = 0x0037) */
-#define IPCP_VJMODE_RFC1172 2 /* "old-rfc"mode (option # = 0x002d) */
-#define IPCP_VJMODE_RFC1332 3 /* "new-rfc"mode (option # = 0x002d, */
- /* maxslot and slot number compression) */
-
-#define IPCP_VJ_COMP 0x002d /* current value for VJ compression option*/
-#define IPCP_VJ_COMP_OLD 0x0037 /* "old" (i.e, broken) value for VJ */
- /* compression option*/
-
-typedef struct ipcp_options {
- bool neg_addr; /* Negotiate IP Address? */
- bool old_addrs; /* Use old (IP-Addresses) option? */
- bool req_addr; /* Ask peer to send IP address? */
- bool default_route; /* Assign default route through interface? */
- bool proxy_arp; /* Make proxy ARP entry for peer? */
- bool neg_vj; /* Van Jacobson Compression? */
- bool old_vj; /* use old (short) form of VJ option? */
- bool accept_local; /* accept peer's value for ouraddr */
- bool accept_remote; /* accept peer's value for hisaddr */
- bool req_dns1; /* Ask peer to send primary DNS address? */
- bool req_dns2; /* Ask peer to send secondary DNS address? */
- int vj_protocol; /* protocol value to use in VJ option */
- int maxslotindex; /* values for RFC1332 VJ compression neg. */
- bool cflag;
- u_int32_t ouraddr, hisaddr; /* Addresses in NETWORK BYTE ORDER */
- u_int32_t dnsaddr[2]; /* Primary and secondary MS DNS entries */
- u_int32_t winsaddr[2]; /* Primary and secondary MS WINS entries */
-} ipcp_options;
-
-extern fsm ipcp_fsm[];
-extern ipcp_options ipcp_wantoptions[];
-extern ipcp_options ipcp_gotoptions[];
-extern ipcp_options ipcp_allowoptions[];
-extern ipcp_options ipcp_hisoptions[];
-
-char *ip_ntoa __P((u_int32_t));
-
-extern struct protent ipcp_protent;
diff --git a/mdk-stage1/ppp/pppd/ipv6cp.c b/mdk-stage1/ppp/pppd/ipv6cp.c
deleted file mode 100644
index 54ff7d7d8..000000000
--- a/mdk-stage1/ppp/pppd/ipv6cp.c
+++ /dev/null
@@ -1,1512 +0,0 @@
-/*
- ipv6cp.c - PPP IPV6 Control Protocol.
- Copyright (C) 1999 Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
- Redistribution and use in source and binary forms are permitted
- provided that the above copyright notice and this paragraph are
- duplicated in all such forms. The name of the author may not be
- used to endorse or promote products derived from this software
- without specific prior written permission.
- THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-*/
-
-/* Original version, based on RFC2023 :
-
- Copyright (c) 1995, 1996, 1997 Francis.Dupont@inria.fr, INRIA Rocquencourt,
- Alain.Durand@imag.fr, IMAG,
- Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
- Copyright (c) 1998, 1999 Francis.Dupont@inria.fr, GIE DYADE,
- Alain.Durand@imag.fr, IMAG,
- Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
- Ce travail a été fait au sein du GIE DYADE (Groupement d'Intéręt
- Économique ayant pour membres BULL S.A. et l'INRIA).
-
- Ce logiciel informatique est disponible aux conditions
- usuelles dans la recherche, c'est-ŕ-dire qu'il peut
- ętre utilisé, copié, modifié, distribué ŕ l'unique
- condition que ce texte soit conservé afin que
- l'origine de ce logiciel soit reconnue.
-
- Le nom de l'Institut National de Recherche en Informatique
- et en Automatique (INRIA), de l'IMAG, ou d'une personne morale
- ou physique ayant participé ŕ l'élaboration de ce logiciel ne peut
- ętre utilisé sans son accord préalable explicite.
-
- Ce logiciel est fourni tel quel sans aucune garantie,
- support ou responsabilité d'aucune sorte.
- Ce logiciel est dérivé de sources d'origine
- "University of California at Berkeley" et
- "Digital Equipment Corporation" couvertes par des copyrights.
-
- L'Institut d'Informatique et de Mathématiques Appliquées de Grenoble (IMAG)
- est une fédération d'unités mixtes de recherche du CNRS, de l'Institut National
- Polytechnique de Grenoble et de l'Université Joseph Fourier regroupant
- sept laboratoires dont le laboratoire Logiciels, Systčmes, Réseaux (LSR).
-
- This work has been done in the context of GIE DYADE (joint R & D venture
- between BULL S.A. and INRIA).
-
- This software is available with usual "research" terms
- with the aim of retain credits of the software.
- Permission to use, copy, modify and distribute this software for any
- purpose and without fee is hereby granted, provided that the above
- copyright notice and this permission notice appear in all copies,
- and the name of INRIA, IMAG, or any contributor not be used in advertising
- or publicity pertaining to this material without the prior explicit
- permission. The software is provided "as is" without any
- warranties, support or liabilities of any kind.
- This software is derived from source code from
- "University of California at Berkeley" and
- "Digital Equipment Corporation" protected by copyrights.
-
- Grenoble's Institute of Computer Science and Applied Mathematics (IMAG)
- is a federation of seven research units funded by the CNRS, National
- Polytechnic Institute of Grenoble and University Joseph Fourier.
- The research unit in Software, Systems, Networks (LSR) is member of IMAG.
-*/
-
-/*
- * Derived from :
- *
- *
- * ipcp.c - PPP IP Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-#define RCSID "$Id$"
-
-/*
- * TODO:
- *
- * Proxy Neighbour Discovery.
- *
- * Better defines for selecting the ordering of
- * interface up / set address. (currently checks for __linux__,
- * since SVR4 && (SNI || __USLC__) didn't work properly)
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <netdb.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-#include "ipv6cp.h"
-#include "magic.h"
-#include "pathnames.h"
-
-static const char rcsid[] = RCSID;
-
-/* global vars */
-ipv6cp_options ipv6cp_wantoptions[NUM_PPP]; /* Options that we want to request */
-ipv6cp_options ipv6cp_gotoptions[NUM_PPP]; /* Options that peer ack'd */
-ipv6cp_options ipv6cp_allowoptions[NUM_PPP]; /* Options we allow peer to request */
-ipv6cp_options ipv6cp_hisoptions[NUM_PPP]; /* Options that we ack'd */
-int no_ifaceid_neg = 0;
-
-/* local vars */
-static int ipv6cp_is_up;
-
-/*
- * Callbacks for fsm code. (CI = Configuration Information)
- */
-static void ipv6cp_resetci __P((fsm *)); /* Reset our CI */
-static int ipv6cp_cilen __P((fsm *)); /* Return length of our CI */
-static void ipv6cp_addci __P((fsm *, u_char *, int *)); /* Add our CI */
-static int ipv6cp_ackci __P((fsm *, u_char *, int)); /* Peer ack'd our CI */
-static int ipv6cp_nakci __P((fsm *, u_char *, int)); /* Peer nak'd our CI */
-static int ipv6cp_rejci __P((fsm *, u_char *, int)); /* Peer rej'd our CI */
-static int ipv6cp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv CI */
-static void ipv6cp_up __P((fsm *)); /* We're UP */
-static void ipv6cp_down __P((fsm *)); /* We're DOWN */
-static void ipv6cp_finished __P((fsm *)); /* Don't need lower layer */
-
-fsm ipv6cp_fsm[NUM_PPP]; /* IPV6CP fsm structure */
-
-static fsm_callbacks ipv6cp_callbacks = { /* IPV6CP callback routines */
- ipv6cp_resetci, /* Reset our Configuration Information */
- ipv6cp_cilen, /* Length of our Configuration Information */
- ipv6cp_addci, /* Add our Configuration Information */
- ipv6cp_ackci, /* ACK our Configuration Information */
- ipv6cp_nakci, /* NAK our Configuration Information */
- ipv6cp_rejci, /* Reject our Configuration Information */
- ipv6cp_reqci, /* Request peer's Configuration Information */
- ipv6cp_up, /* Called when fsm reaches OPENED state */
- ipv6cp_down, /* Called when fsm leaves OPENED state */
- NULL, /* Called when we want the lower layer up */
- ipv6cp_finished, /* Called when we want the lower layer down */
- NULL, /* Called when Protocol-Reject received */
- NULL, /* Retransmission is necessary */
- NULL, /* Called to handle protocol-specific codes */
- "IPV6CP" /* String name of protocol */
-};
-
-/*
- * Command-line options.
- */
-static int setifaceid __P((char **arg));
-static void printifaceid __P((option_t *,
- void (*)(void *, char *, ...), void *));
-
-static option_t ipv6cp_option_list[] = {
- { "ipv6", o_special, (void *)setifaceid,
- "Set interface identifiers for IPV6",
- OPT_A2PRINTER, (void *)printifaceid },
-
- { "+ipv6", o_bool, &ipv6cp_protent.enabled_flag,
- "Enable IPv6 and IPv6CP", OPT_PRIO | 1 },
- { "noipv6", o_bool, &ipv6cp_protent.enabled_flag,
- "Disable IPv6 and IPv6CP", OPT_PRIOSUB },
- { "-ipv6", o_bool, &ipv6cp_protent.enabled_flag,
- "Disable IPv6 and IPv6CP", OPT_PRIOSUB | OPT_ALIAS },
-
- { "ipv6cp-accept-local", o_bool, &ipv6cp_allowoptions[0].accept_local,
- "Accept peer's interface identifier for us", 1 },
-
- { "ipv6cp-use-ipaddr", o_bool, &ipv6cp_allowoptions[0].use_ip,
- "Use (default) IPv4 address as interface identifier", 1 },
-
-#if defined(SOL2)
- { "ipv6cp-use-persistent", o_bool, &ipv6cp_wantoptions[0].use_persistent,
- "Use uniquely-available persistent value for link local address", 1 },
-#endif /* defined(SOL2) */
-
- { "ipv6cp-restart", o_int, &ipv6cp_fsm[0].timeouttime,
- "Set timeout for IPv6CP", OPT_PRIO },
- { "ipv6cp-max-terminate", o_int, &ipv6cp_fsm[0].maxtermtransmits,
- "Set max #xmits for term-reqs", OPT_PRIO },
- { "ipv6cp-max-configure", o_int, &ipv6cp_fsm[0].maxconfreqtransmits,
- "Set max #xmits for conf-reqs", OPT_PRIO },
- { "ipv6cp-max-failure", o_int, &ipv6cp_fsm[0].maxnakloops,
- "Set max #conf-naks for IPv6CP", OPT_PRIO },
-
- { NULL }
-};
-
-
-/*
- * Protocol entry points from main code.
- */
-static void ipv6cp_init __P((int));
-static void ipv6cp_open __P((int));
-static void ipv6cp_close __P((int, char *));
-static void ipv6cp_lowerup __P((int));
-static void ipv6cp_lowerdown __P((int));
-static void ipv6cp_input __P((int, u_char *, int));
-static void ipv6cp_protrej __P((int));
-static int ipv6cp_printpkt __P((u_char *, int,
- void (*) __P((void *, char *, ...)), void *));
-static void ipv6_check_options __P((void));
-static int ipv6_demand_conf __P((int));
-static int ipv6_active_pkt __P((u_char *, int));
-
-struct protent ipv6cp_protent = {
- PPP_IPV6CP,
- ipv6cp_init,
- ipv6cp_input,
- ipv6cp_protrej,
- ipv6cp_lowerup,
- ipv6cp_lowerdown,
- ipv6cp_open,
- ipv6cp_close,
- ipv6cp_printpkt,
- NULL,
- 0,
- "IPV6CP",
- "IPV6",
- ipv6cp_option_list,
- ipv6_check_options,
- ipv6_demand_conf,
- ipv6_active_pkt
-};
-
-static void ipv6cp_clear_addrs __P((int, eui64_t, eui64_t));
-static void ipv6cp_script __P((char *));
-static void ipv6cp_script_done __P((void *));
-
-/*
- * Lengths of configuration options.
- */
-#define CILEN_VOID 2
-#define CILEN_COMPRESS 4 /* length for RFC2023 compress opt. */
-#define CILEN_IFACEID 10 /* RFC2472, interface identifier */
-
-#define CODENAME(x) ((x) == CONFACK ? "ACK" : \
- (x) == CONFNAK ? "NAK" : "REJ")
-
-/*
- * This state variable is used to ensure that we don't
- * run an ipcp-up/down script while one is already running.
- */
-static enum script_state {
- s_down,
- s_up,
-} ipv6cp_script_state;
-static pid_t ipv6cp_script_pid;
-
-/*
- * setifaceid - set the interface identifiers manually
- */
-static int
-setifaceid(argv)
- char **argv;
-{
- char *comma, *arg, c;
- ipv6cp_options *wo = &ipv6cp_wantoptions[0];
- struct in6_addr addr;
- static int prio_local, prio_remote;
-
-#define VALIDID(a) ( (((a).s6_addr32[0] == 0) && ((a).s6_addr32[1] == 0)) && \
- (((a).s6_addr32[2] != 0) || ((a).s6_addr32[3] != 0)) )
-
- arg = *argv;
- if ((comma = strchr(arg, ',')) == NULL)
- comma = arg + strlen(arg);
-
- /*
- * If comma first character, then no local identifier
- */
- if (comma != arg) {
- c = *comma;
- *comma = '\0';
-
- if (inet_pton(AF_INET6, arg, &addr) == 0 || !VALIDID(addr)) {
- option_error("Illegal interface identifier (local): %s", arg);
- return 0;
- }
-
- if (option_priority >= prio_local) {
- eui64_copy(addr.s6_addr32[2], wo->ourid);
- wo->opt_local = 1;
- prio_local = option_priority;
- }
- *comma = c;
- }
-
- /*
- * If comma last character, the no remote identifier
- */
- if (*comma != 0 && *++comma != '\0') {
- if (inet_pton(AF_INET6, comma, &addr) == 0 || !VALIDID(addr)) {
- option_error("Illegal interface identifier (remote): %s", comma);
- return 0;
- }
- if (option_priority >= prio_remote) {
- eui64_copy(addr.s6_addr32[2], wo->hisid);
- wo->opt_remote = 1;
- prio_remote = option_priority;
- }
- }
-
- if (override_value("+ipv6", option_priority, option_source))
- ipv6cp_protent.enabled_flag = 1;
- return 1;
-}
-
-static void
-printifaceid(opt, printer, arg)
- option_t *opt;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- ipv6cp_options *wo = &ipv6cp_wantoptions[0];
-
- if (wo->opt_local)
- printer(arg, "%s", llv6_ntoa(wo->ourid));
- printer(arg, ",");
- if (wo->opt_remote)
- printer(arg, "%s", llv6_ntoa(wo->hisid));
-}
-
-/*
- * Make a string representation of a network address.
- */
-char *
-llv6_ntoa(ifaceid)
- eui64_t ifaceid;
-{
- static char b[64];
-
- sprintf(b, "fe80::%s", eui64_ntoa(ifaceid));
- return b;
-}
-
-
-/*
- * ipv6cp_init - Initialize IPV6CP.
- */
-static void
-ipv6cp_init(unit)
- int unit;
-{
- fsm *f = &ipv6cp_fsm[unit];
- ipv6cp_options *wo = &ipv6cp_wantoptions[unit];
- ipv6cp_options *ao = &ipv6cp_allowoptions[unit];
-
- f->unit = unit;
- f->protocol = PPP_IPV6CP;
- f->callbacks = &ipv6cp_callbacks;
- fsm_init(&ipv6cp_fsm[unit]);
-
- memset(wo, 0, sizeof(*wo));
- memset(ao, 0, sizeof(*ao));
-
- wo->accept_local = 1;
- wo->neg_ifaceid = 1;
- ao->neg_ifaceid = 1;
-
-#ifdef IPV6CP_COMP
- wo->neg_vj = 1;
- ao->neg_vj = 1;
- wo->vj_protocol = IPV6CP_COMP;
-#endif
-
-}
-
-
-/*
- * ipv6cp_open - IPV6CP is allowed to come up.
- */
-static void
-ipv6cp_open(unit)
- int unit;
-{
- fsm_open(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_close - Take IPV6CP down.
- */
-static void
-ipv6cp_close(unit, reason)
- int unit;
- char *reason;
-{
- fsm_close(&ipv6cp_fsm[unit], reason);
-}
-
-
-/*
- * ipv6cp_lowerup - The lower layer is up.
- */
-static void
-ipv6cp_lowerup(unit)
- int unit;
-{
- fsm_lowerup(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_lowerdown - The lower layer is down.
- */
-static void
-ipv6cp_lowerdown(unit)
- int unit;
-{
- fsm_lowerdown(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_input - Input IPV6CP packet.
- */
-static void
-ipv6cp_input(unit, p, len)
- int unit;
- u_char *p;
- int len;
-{
- fsm_input(&ipv6cp_fsm[unit], p, len);
-}
-
-
-/*
- * ipv6cp_protrej - A Protocol-Reject was received for IPV6CP.
- *
- * Pretend the lower layer went down, so we shut up.
- */
-static void
-ipv6cp_protrej(unit)
- int unit;
-{
- fsm_lowerdown(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_resetci - Reset our CI.
- */
-static void
-ipv6cp_resetci(f)
- fsm *f;
-{
- ipv6cp_options *wo = &ipv6cp_wantoptions[f->unit];
- ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-
- wo->req_ifaceid = wo->neg_ifaceid && ipv6cp_allowoptions[f->unit].neg_ifaceid;
-
- if (!wo->opt_local) {
- eui64_magic_nz(wo->ourid);
- }
-
- *go = *wo;
- eui64_zero(go->hisid); /* last proposed interface identifier */
-}
-
-
-/*
- * ipv6cp_cilen - Return length of our CI.
- */
-static int
-ipv6cp_cilen(f)
- fsm *f;
-{
- ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-
-#define LENCIVJ(neg) (neg ? CILEN_COMPRESS : 0)
-#define LENCIIFACEID(neg) (neg ? CILEN_IFACEID : 0)
-
- return (LENCIIFACEID(go->neg_ifaceid) +
- LENCIVJ(go->neg_vj));
-}
-
-
-/*
- * ipv6cp_addci - Add our desired CIs to a packet.
- */
-static void
-ipv6cp_addci(f, ucp, lenp)
- fsm *f;
- u_char *ucp;
- int *lenp;
-{
- ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
- int len = *lenp;
-
-#define ADDCIVJ(opt, neg, val) \
- if (neg) { \
- int vjlen = CILEN_COMPRESS; \
- if (len >= vjlen) { \
- PUTCHAR(opt, ucp); \
- PUTCHAR(vjlen, ucp); \
- PUTSHORT(val, ucp); \
- len -= vjlen; \
- } else \
- neg = 0; \
- }
-
-#define ADDCIIFACEID(opt, neg, val1) \
- if (neg) { \
- int idlen = CILEN_IFACEID; \
- if (len >= idlen) { \
- PUTCHAR(opt, ucp); \
- PUTCHAR(idlen, ucp); \
- eui64_put(val1, ucp); \
- len -= idlen; \
- } else \
- neg = 0; \
- }
-
- ADDCIIFACEID(CI_IFACEID, go->neg_ifaceid, go->ourid);
-
- ADDCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol);
-
- *lenp -= len;
-}
-
-
-/*
- * ipv6cp_ackci - Ack our CIs.
- *
- * Returns:
- * 0 - Ack was bad.
- * 1 - Ack was good.
- */
-static int
-ipv6cp_ackci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
- u_short cilen, citype, cishort;
- eui64_t ifaceid;
-
- /*
- * CIs must be in exactly the same order that we sent...
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-
-#define ACKCIVJ(opt, neg, val) \
- if (neg) { \
- int vjlen = CILEN_COMPRESS; \
- if ((len -= vjlen) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != vjlen || \
- citype != opt) \
- goto bad; \
- GETSHORT(cishort, p); \
- if (cishort != val) \
- goto bad; \
- }
-
-#define ACKCIIFACEID(opt, neg, val1) \
- if (neg) { \
- int idlen = CILEN_IFACEID; \
- if ((len -= idlen) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != idlen || \
- citype != opt) \
- goto bad; \
- eui64_get(ifaceid, p); \
- if (! eui64_equals(val1, ifaceid)) \
- goto bad; \
- }
-
- ACKCIIFACEID(CI_IFACEID, go->neg_ifaceid, go->ourid);
-
- ACKCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol);
-
- /*
- * If there are any remaining CIs, then this packet is bad.
- */
- if (len != 0)
- goto bad;
- return (1);
-
-bad:
- IPV6CPDEBUG(("ipv6cp_ackci: received bad Ack!"));
- return (0);
-}
-
-/*
- * ipv6cp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if IPV6CP is in the OPENED state.
- *
- * Returns:
- * 0 - Nak was bad.
- * 1 - Nak was good.
- */
-static int
-ipv6cp_nakci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
- u_char citype, cilen, *next;
- u_short cishort;
- eui64_t ifaceid;
- ipv6cp_options no; /* options we've seen Naks for */
- ipv6cp_options try; /* options to request next time */
-
- BZERO(&no, sizeof(no));
- try = *go;
-
- /*
- * Any Nak'd CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-#define NAKCIIFACEID(opt, neg, code) \
- if (go->neg && \
- len >= (cilen = CILEN_IFACEID) && \
- p[1] == cilen && \
- p[0] == opt) { \
- len -= cilen; \
- INCPTR(2, p); \
- eui64_get(ifaceid, p); \
- no.neg = 1; \
- code \
- }
-
-#define NAKCIVJ(opt, neg, code) \
- if (go->neg && \
- ((cilen = p[1]) == CILEN_COMPRESS) && \
- len >= cilen && \
- p[0] == opt) { \
- len -= cilen; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- no.neg = 1; \
- code \
- }
-
- /*
- * Accept the peer's idea of {our,his} interface identifier, if different
- * from our idea, only if the accept_{local,remote} flag is set.
- */
- NAKCIIFACEID(CI_IFACEID, neg_ifaceid,
- if (go->accept_local) {
- while (eui64_iszero(ifaceid) ||
- eui64_equals(ifaceid, go->hisid)) /* bad luck */
- eui64_magic(ifaceid);
- try.ourid = ifaceid;
- IPV6CPDEBUG(("local LL address %s", llv6_ntoa(ifaceid)));
- }
- );
-
-#ifdef IPV6CP_COMP
- NAKCIVJ(CI_COMPRESSTYPE, neg_vj,
- {
- if (cishort == IPV6CP_COMP) {
- try.vj_protocol = cishort;
- } else {
- try.neg_vj = 0;
- }
- }
- );
-#else
- NAKCIVJ(CI_COMPRESSTYPE, neg_vj,
- {
- try.neg_vj = 0;
- }
- );
-#endif
-
- /*
- * There may be remaining CIs, if the peer is requesting negotiation
- * on an option that we didn't include in our request packet.
- * If they want to negotiate about interface identifier, we comply.
- * If they want us to ask for compression, we refuse.
- */
- while (len > CILEN_VOID) {
- GETCHAR(citype, p);
- GETCHAR(cilen, p);
- if( (len -= cilen) < 0 )
- goto bad;
- next = p + cilen - 2;
-
- switch (citype) {
- case CI_COMPRESSTYPE:
- if (go->neg_vj || no.neg_vj ||
- (cilen != CILEN_COMPRESS))
- goto bad;
- no.neg_vj = 1;
- break;
- case CI_IFACEID:
- if (go->neg_ifaceid || no.neg_ifaceid || cilen != CILEN_IFACEID)
- goto bad;
- try.neg_ifaceid = 1;
- eui64_get(ifaceid, p);
- if (go->accept_local) {
- while (eui64_iszero(ifaceid) ||
- eui64_equals(ifaceid, go->hisid)) /* bad luck */
- eui64_magic(ifaceid);
- try.ourid = ifaceid;
- }
- no.neg_ifaceid = 1;
- break;
- }
- p = next;
- }
-
- /* If there is still anything left, this packet is bad. */
- if (len != 0)
- goto bad;
-
- /*
- * OK, the Nak is good. Now we can update state.
- */
- if (f->state != OPENED)
- *go = try;
-
- return 1;
-
-bad:
- IPV6CPDEBUG(("ipv6cp_nakci: received bad Nak!"));
- return 0;
-}
-
-
-/*
- * ipv6cp_rejci - Reject some of our CIs.
- */
-static int
-ipv6cp_rejci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
- u_char cilen;
- u_short cishort;
- eui64_t ifaceid;
- ipv6cp_options try; /* options to request next time */
-
- try = *go;
- /*
- * Any Rejected CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-#define REJCIIFACEID(opt, neg, val1) \
- if (go->neg && \
- len >= (cilen = CILEN_IFACEID) && \
- p[1] == cilen && \
- p[0] == opt) { \
- len -= cilen; \
- INCPTR(2, p); \
- eui64_get(ifaceid, p); \
- /* Check rejected value. */ \
- if (! eui64_equals(ifaceid, val1)) \
- goto bad; \
- try.neg = 0; \
- }
-
-#define REJCIVJ(opt, neg, val) \
- if (go->neg && \
- p[1] == CILEN_COMPRESS && \
- len >= p[1] && \
- p[0] == opt) { \
- len -= p[1]; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- /* Check rejected value. */ \
- if (cishort != val) \
- goto bad; \
- try.neg = 0; \
- }
-
- REJCIIFACEID(CI_IFACEID, neg_ifaceid, go->ourid);
-
- REJCIVJ(CI_COMPRESSTYPE, neg_vj, go->vj_protocol);
-
- /*
- * If there are any remaining CIs, then this packet is bad.
- */
- if (len != 0)
- goto bad;
- /*
- * Now we can update state.
- */
- if (f->state != OPENED)
- *go = try;
- return 1;
-
-bad:
- IPV6CPDEBUG(("ipv6cp_rejci: received bad Reject!"));
- return 0;
-}
-
-
-/*
- * ipv6cp_reqci - Check the peer's requested CIs and send appropriate response.
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately. If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-ipv6cp_reqci(f, inp, len, reject_if_disagree)
- fsm *f;
- u_char *inp; /* Requested CIs */
- int *len; /* Length of requested CIs */
- int reject_if_disagree;
-{
- ipv6cp_options *wo = &ipv6cp_wantoptions[f->unit];
- ipv6cp_options *ho = &ipv6cp_hisoptions[f->unit];
- ipv6cp_options *ao = &ipv6cp_allowoptions[f->unit];
- ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
- u_char *cip, *next; /* Pointer to current and next CIs */
- u_short cilen, citype; /* Parsed len, type */
- u_short cishort; /* Parsed short value */
- eui64_t ifaceid; /* Parsed interface identifier */
- int rc = CONFACK; /* Final packet return code */
- int orc; /* Individual option return code */
- u_char *p; /* Pointer to next char to parse */
- u_char *ucp = inp; /* Pointer to current output char */
- int l = *len; /* Length left */
-
- /*
- * Reset all his options.
- */
- BZERO(ho, sizeof(*ho));
-
- /*
- * Process all his options.
- */
- next = inp;
- while (l) {
- orc = CONFACK; /* Assume success */
- cip = p = next; /* Remember begining of CI */
- if (l < 2 || /* Not enough data for CI header or */
- p[1] < 2 || /* CI length too small or */
- p[1] > l) { /* CI length too big? */
- IPV6CPDEBUG(("ipv6cp_reqci: bad CI length!"));
- orc = CONFREJ; /* Reject bad CI */
- cilen = l; /* Reject till end of packet */
- l = 0; /* Don't loop again */
- goto endswitch;
- }
- GETCHAR(citype, p); /* Parse CI type */
- GETCHAR(cilen, p); /* Parse CI length */
- l -= cilen; /* Adjust remaining length */
- next += cilen; /* Step to next CI */
-
- switch (citype) { /* Check CI type */
- case CI_IFACEID:
- IPV6CPDEBUG(("ipv6cp: received interface identifier "));
-
- if (!ao->neg_ifaceid ||
- cilen != CILEN_IFACEID) { /* Check CI length */
- orc = CONFREJ; /* Reject CI */
- break;
- }
-
- /*
- * If he has no interface identifier, or if we both have same
- * identifier then NAK it with new idea.
- * In particular, if we don't know his identifier, but he does,
- * then accept it.
- */
- eui64_get(ifaceid, p);
- IPV6CPDEBUG(("(%s)", llv6_ntoa(ifaceid)));
- if (eui64_iszero(ifaceid) && eui64_iszero(go->ourid)) {
- orc = CONFREJ; /* Reject CI */
- break;
- }
- if (!eui64_iszero(wo->hisid) &&
- !eui64_equals(ifaceid, wo->hisid) &&
- eui64_iszero(go->hisid)) {
-
- orc = CONFNAK;
- ifaceid = wo->hisid;
- go->hisid = ifaceid;
- DECPTR(sizeof(ifaceid), p);
- eui64_put(ifaceid, p);
- } else
- if (eui64_iszero(ifaceid) || eui64_equals(ifaceid, go->ourid)) {
- orc = CONFNAK;
- if (eui64_iszero(go->hisid)) /* first time, try option */
- ifaceid = wo->hisid;
- while (eui64_iszero(ifaceid) ||
- eui64_equals(ifaceid, go->ourid)) /* bad luck */
- eui64_magic(ifaceid);
- go->hisid = ifaceid;
- DECPTR(sizeof(ifaceid), p);
- eui64_put(ifaceid, p);
- }
-
- ho->neg_ifaceid = 1;
- ho->hisid = ifaceid;
- break;
-
- case CI_COMPRESSTYPE:
- IPV6CPDEBUG(("ipv6cp: received COMPRESSTYPE "));
- if (!ao->neg_vj ||
- (cilen != CILEN_COMPRESS)) {
- orc = CONFREJ;
- break;
- }
- GETSHORT(cishort, p);
- IPV6CPDEBUG(("(%d)", cishort));
-
-#ifdef IPV6CP_COMP
- if (!(cishort == IPV6CP_COMP)) {
- orc = CONFREJ;
- break;
- }
-
- ho->neg_vj = 1;
- ho->vj_protocol = cishort;
- break;
-#else
- orc = CONFREJ;
- break;
-#endif
-
- default:
- orc = CONFREJ;
- break;
- }
-
-endswitch:
- IPV6CPDEBUG((" (%s)\n", CODENAME(orc)));
-
- if (orc == CONFACK && /* Good CI */
- rc != CONFACK) /* but prior CI wasnt? */
- continue; /* Don't send this one */
-
- if (orc == CONFNAK) { /* Nak this CI? */
- if (reject_if_disagree) /* Getting fed up with sending NAKs? */
- orc = CONFREJ; /* Get tough if so */
- else {
- if (rc == CONFREJ) /* Rejecting prior CI? */
- continue; /* Don't send this one */
- if (rc == CONFACK) { /* Ack'd all prior CIs? */
- rc = CONFNAK; /* Not anymore... */
- ucp = inp; /* Backup */
- }
- }
- }
-
- if (orc == CONFREJ && /* Reject this CI */
- rc != CONFREJ) { /* but no prior ones? */
- rc = CONFREJ;
- ucp = inp; /* Backup */
- }
-
- /* Need to move CI? */
- if (ucp != cip)
- BCOPY(cip, ucp, cilen); /* Move it */
-
- /* Update output pointer */
- INCPTR(cilen, ucp);
- }
-
- /*
- * If we aren't rejecting this packet, and we want to negotiate
- * their identifier and they didn't send their identifier, then we
- * send a NAK with a CI_IFACEID option appended. We assume the
- * input buffer is long enough that we can append the extra
- * option safely.
- */
- if (rc != CONFREJ && !ho->neg_ifaceid &&
- wo->req_ifaceid && !reject_if_disagree) {
- if (rc == CONFACK) {
- rc = CONFNAK;
- ucp = inp; /* reset pointer */
- wo->req_ifaceid = 0; /* don't ask again */
- }
- PUTCHAR(CI_IFACEID, ucp);
- PUTCHAR(CILEN_IFACEID, ucp);
- eui64_put(wo->hisid, ucp);
- }
-
- *len = ucp - inp; /* Compute output length */
- IPV6CPDEBUG(("ipv6cp: returning Configure-%s", CODENAME(rc)));
- return (rc); /* Return final code */
-}
-
-
-/*
- * ipv6_check_options - check that any IP-related options are OK,
- * and assign appropriate defaults.
- */
-static void
-ipv6_check_options()
-{
- ipv6cp_options *wo = &ipv6cp_wantoptions[0];
-
- if (!ipv6cp_protent.enabled_flag)
- return;
-
-#if defined(SOL2)
- /*
- * Persistent link-local id is only used when user has not explicitly
- * configure/hard-code the id
- */
- if ((wo->use_persistent) && (!wo->opt_local) && (!wo->opt_remote)) {
-
- /*
- * On systems where there are no Ethernet interfaces used, there
- * may be other ways to obtain a persistent id. Right now, it
- * will fall back to using magic [see eui64_magic] below when
- * an EUI-48 from MAC address can't be obtained. Other possibilities
- * include obtaining EEPROM serial numbers, or some other unique
- * yet persistent number. On Sparc platforms, this is possible,
- * but too bad there's no standards yet for x86 machines.
- */
- if (ether_to_eui64(&wo->ourid)) {
- wo->opt_local = 1;
- }
- }
-#endif
-
- if (!wo->opt_local) { /* init interface identifier */
- if (wo->use_ip && eui64_iszero(wo->ourid)) {
- eui64_setlo32(wo->ourid, ntohl(ipcp_wantoptions[0].ouraddr));
- if (!eui64_iszero(wo->ourid))
- wo->opt_local = 1;
- }
-
- while (eui64_iszero(wo->ourid))
- eui64_magic(wo->ourid);
- }
-
- if (!wo->opt_remote) {
- if (wo->use_ip && eui64_iszero(wo->hisid)) {
- eui64_setlo32(wo->hisid, ntohl(ipcp_wantoptions[0].hisaddr));
- if (!eui64_iszero(wo->hisid))
- wo->opt_remote = 1;
- }
- }
-
- if (demand && (eui64_iszero(wo->ourid) || eui64_iszero(wo->hisid))) {
- option_error("local/remote LL address required for demand-dialling\n");
- exit(1);
- }
-}
-
-
-/*
- * ipv6_demand_conf - configure the interface as though
- * IPV6CP were up, for use with dial-on-demand.
- */
-static int
-ipv6_demand_conf(u)
- int u;
-{
- ipv6cp_options *wo = &ipv6cp_wantoptions[u];
-
-#if defined(__linux__) || defined(SOL2) || (defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-#if defined(SOL2)
- if (!sif6up(u))
- return 0;
-#else
- if (!sifup(u))
- return 0;
-#endif /* defined(SOL2) */
-#endif
- if (!sif6addr(u, wo->ourid, wo->hisid))
- return 0;
-#if !defined(__linux__) && !(defined(SVR4) && (defined(SNI) || defined(__USLC__)))
- if (!sifup(u))
- return 0;
-#endif
- if (!sifnpmode(u, PPP_IPV6, NPMODE_QUEUE))
- return 0;
-
- notice("ipv6_demand_conf");
- notice("local LL address %s", llv6_ntoa(wo->ourid));
- notice("remote LL address %s", llv6_ntoa(wo->hisid));
-
- return 1;
-}
-
-
-/*
- * ipv6cp_up - IPV6CP has come UP.
- *
- * Configure the IPv6 network interface appropriately and bring it up.
- */
-static void
-ipv6cp_up(f)
- fsm *f;
-{
- ipv6cp_options *ho = &ipv6cp_hisoptions[f->unit];
- ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
- ipv6cp_options *wo = &ipv6cp_wantoptions[f->unit];
-
- IPV6CPDEBUG(("ipv6cp: up"));
-
- /*
- * We must have a non-zero LL address for both ends of the link.
- */
- if (!ho->neg_ifaceid)
- ho->hisid = wo->hisid;
-
- if(!no_ifaceid_neg) {
- if (eui64_iszero(ho->hisid)) {
- error("Could not determine remote LL address");
- ipv6cp_close(f->unit, "Could not determine remote LL address");
- return;
- }
- if (eui64_iszero(go->ourid)) {
- error("Could not determine local LL address");
- ipv6cp_close(f->unit, "Could not determine local LL address");
- return;
- }
- if (eui64_equals(go->ourid, ho->hisid)) {
- error("local and remote LL addresses are equal");
- ipv6cp_close(f->unit, "local and remote LL addresses are equal");
- return;
- }
- }
- script_setenv("LLLOCAL", llv6_ntoa(go->ourid), 0);
- script_setenv("LLREMOTE", llv6_ntoa(ho->hisid), 0);
-
-#ifdef IPV6CP_COMP
- /* set tcp compression */
- sif6comp(f->unit, ho->neg_vj);
-#endif
-
- /*
- * If we are doing dial-on-demand, the interface is already
- * configured, so we put out any saved-up packets, then set the
- * interface to pass IPv6 packets.
- */
- if (demand) {
- if (! eui64_equals(go->ourid, wo->ourid) ||
- ! eui64_equals(ho->hisid, wo->hisid)) {
- if (! eui64_equals(go->ourid, wo->ourid))
- warn("Local LL address changed to %s",
- llv6_ntoa(go->ourid));
- if (! eui64_equals(ho->hisid, wo->hisid))
- warn("Remote LL address changed to %s",
- llv6_ntoa(ho->hisid));
- ipv6cp_clear_addrs(f->unit, go->ourid, ho->hisid);
-
- /* Set the interface to the new addresses */
- if (!sif6addr(f->unit, go->ourid, ho->hisid)) {
- if (debug)
- warn("sif6addr failed");
- ipv6cp_close(f->unit, "Interface configuration failed");
- return;
- }
-
- }
- demand_rexmit(PPP_IPV6);
- sifnpmode(f->unit, PPP_IPV6, NPMODE_PASS);
-
- } else {
- /*
- * Set LL addresses
- */
-#if !defined(__linux__) && !defined(SOL2) && !(defined(SVR4) && (defined(SNI) || defined(__USLC__)))
- if (!sif6addr(f->unit, go->ourid, ho->hisid)) {
- if (debug)
- warn("sif6addr failed");
- ipv6cp_close(f->unit, "Interface configuration failed");
- return;
- }
-#endif
-
- /* bring the interface up for IPv6 */
-#if defined(SOL2)
- if (!sif6up(f->unit)) {
- if (debug)
- warn("sifup failed (IPV6)");
- ipv6cp_close(f->unit, "Interface configuration failed");
- return;
- }
-#else
- if (!sifup(f->unit)) {
- if (debug)
- warn("sifup failed (IPV6)");
- ipv6cp_close(f->unit, "Interface configuration failed");
- return;
- }
-#endif /* defined(SOL2) */
-
-#if defined(__linux__) || defined(SOL2) || (defined(SVR4) && (defined(SNI) || defined(__USLC__)))
- if (!sif6addr(f->unit, go->ourid, ho->hisid)) {
- if (debug)
- warn("sif6addr failed");
- ipv6cp_close(f->unit, "Interface configuration failed");
- return;
- }
-#endif
- sifnpmode(f->unit, PPP_IPV6, NPMODE_PASS);
-
- notice("local LL address %s", llv6_ntoa(go->ourid));
- notice("remote LL address %s", llv6_ntoa(ho->hisid));
- }
-
- np_up(f->unit, PPP_IPV6);
- ipv6cp_is_up = 1;
-
- /*
- * Execute the ipv6-up script, like this:
- * /etc/ppp/ipv6-up interface tty speed local-LL remote-LL
- */
- if (ipv6cp_script_state == s_down && ipv6cp_script_pid == 0) {
- ipv6cp_script_state = s_up;
- ipv6cp_script(_PATH_IPV6UP);
- }
-}
-
-
-/*
- * ipv6cp_down - IPV6CP has gone DOWN.
- *
- * Take the IPv6 network interface down, clear its addresses
- * and delete routes through it.
- */
-static void
-ipv6cp_down(f)
- fsm *f;
-{
- IPV6CPDEBUG(("ipv6cp: down"));
- update_link_stats(f->unit);
- if (ipv6cp_is_up) {
- ipv6cp_is_up = 0;
- np_down(f->unit, PPP_IPV6);
- }
-#ifdef IPV6CP_COMP
- sif6comp(f->unit, 0);
-#endif
-
- /*
- * If we are doing dial-on-demand, set the interface
- * to queue up outgoing packets (for now).
- */
- if (demand) {
- sifnpmode(f->unit, PPP_IPV6, NPMODE_QUEUE);
- } else {
- sifnpmode(f->unit, PPP_IPV6, NPMODE_DROP);
-#if !defined(__linux__) && !(defined(SVR4) && (defined(SNI) || defined(__USLC)))
-#if defined(SOL2)
- sif6down(f->unit);
-#else
- sifdown(f->unit);
-#endif /* defined(SOL2) */
-#endif
- ipv6cp_clear_addrs(f->unit,
- ipv6cp_gotoptions[f->unit].ourid,
- ipv6cp_hisoptions[f->unit].hisid);
-#if defined(__linux__) || (defined(SVR4) && (defined(SNI) || defined(__USLC)))
- sifdown(f->unit);
-#endif
- }
-
- /* Execute the ipv6-down script */
- if (ipv6cp_script_state == s_up && ipv6cp_script_pid == 0) {
- ipv6cp_script_state = s_down;
- ipv6cp_script(_PATH_IPV6DOWN);
- }
-}
-
-
-/*
- * ipv6cp_clear_addrs() - clear the interface addresses, routes,
- * proxy neighbour discovery entries, etc.
- */
-static void
-ipv6cp_clear_addrs(unit, ourid, hisid)
- int unit;
- eui64_t ourid;
- eui64_t hisid;
-{
- cif6addr(unit, ourid, hisid);
-}
-
-
-/*
- * ipv6cp_finished - possibly shut down the lower layers.
- */
-static void
-ipv6cp_finished(f)
- fsm *f;
-{
- np_finished(f->unit, PPP_IPV6);
-}
-
-
-/*
- * ipv6cp_script_done - called when the ipv6-up or ipv6-down script
- * has finished.
- */
-static void
-ipv6cp_script_done(arg)
- void *arg;
-{
- ipv6cp_script_pid = 0;
- switch (ipv6cp_script_state) {
- case s_up:
- if (ipv6cp_fsm[0].state != OPENED) {
- ipv6cp_script_state = s_down;
- ipv6cp_script(_PATH_IPV6DOWN);
- }
- break;
- case s_down:
- if (ipv6cp_fsm[0].state == OPENED) {
- ipv6cp_script_state = s_up;
- ipv6cp_script(_PATH_IPV6UP);
- }
- break;
- }
-}
-
-
-/*
- * ipv6cp_script - Execute a script with arguments
- * interface-name tty-name speed local-LL remote-LL.
- */
-static void
-ipv6cp_script(script)
- char *script;
-{
- char strspeed[32], strlocal[32], strremote[32];
- char *argv[8];
-
- sprintf(strspeed, "%d", baud_rate);
- strcpy(strlocal, llv6_ntoa(ipv6cp_gotoptions[0].ourid));
- strcpy(strremote, llv6_ntoa(ipv6cp_hisoptions[0].hisid));
-
- argv[0] = script;
- argv[1] = ifname;
- argv[2] = devnam;
- argv[3] = strspeed;
- argv[4] = strlocal;
- argv[5] = strremote;
- argv[6] = ipparam;
- argv[7] = NULL;
-
- ipv6cp_script_pid = run_program(script, argv, 0, ipv6cp_script_done, NULL);
-}
-
-/*
- * ipv6cp_printpkt - print the contents of an IPV6CP packet.
- */
-static char *ipv6cp_codenames[] = {
- "ConfReq", "ConfAck", "ConfNak", "ConfRej",
- "TermReq", "TermAck", "CodeRej"
-};
-
-static int
-ipv6cp_printpkt(p, plen, printer, arg)
- u_char *p;
- int plen;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int code, id, len, olen;
- u_char *pstart, *optend;
- u_short cishort;
- eui64_t ifaceid;
-
- if (plen < HEADERLEN)
- return 0;
- pstart = p;
- GETCHAR(code, p);
- GETCHAR(id, p);
- GETSHORT(len, p);
- if (len < HEADERLEN || len > plen)
- return 0;
-
- if (code >= 1 && code <= sizeof(ipv6cp_codenames) / sizeof(char *))
- printer(arg, " %s", ipv6cp_codenames[code-1]);
- else
- printer(arg, " code=0x%x", code);
- printer(arg, " id=0x%x", id);
- len -= HEADERLEN;
- switch (code) {
- case CONFREQ:
- case CONFACK:
- case CONFNAK:
- case CONFREJ:
- /* print option list */
- while (len >= 2) {
- GETCHAR(code, p);
- GETCHAR(olen, p);
- p -= 2;
- if (olen < 2 || olen > len) {
- break;
- }
- printer(arg, " <");
- len -= olen;
- optend = p + olen;
- switch (code) {
- case CI_COMPRESSTYPE:
- if (olen >= CILEN_COMPRESS) {
- p += 2;
- GETSHORT(cishort, p);
- printer(arg, "compress ");
- printer(arg, "0x%x", cishort);
- }
- break;
- case CI_IFACEID:
- if (olen == CILEN_IFACEID) {
- p += 2;
- eui64_get(ifaceid, p);
- printer(arg, "addr %s", llv6_ntoa(ifaceid));
- }
- break;
- }
- while (p < optend) {
- GETCHAR(code, p);
- printer(arg, " %.2x", code);
- }
- printer(arg, ">");
- }
- break;
-
- case TERMACK:
- case TERMREQ:
- if (len > 0 && *p >= ' ' && *p < 0x7f) {
- printer(arg, " ");
- print_string((char *)p, len, printer, arg);
- p += len;
- len = 0;
- }
- break;
- }
-
- /* print the rest of the bytes in the packet */
- for (; len > 0; --len) {
- GETCHAR(code, p);
- printer(arg, " %.2x", code);
- }
-
- return p - pstart;
-}
-
-/*
- * ipv6_active_pkt - see if this IP packet is worth bringing the link up for.
- * We don't bring the link up for IP fragments or for TCP FIN packets
- * with no data.
- */
-#define IP6_HDRLEN 40 /* bytes */
-#define IP6_NHDR_FRAG 44 /* fragment IPv6 header */
-#define IPPROTO_TCP 6
-#define TCP_HDRLEN 20
-#define TH_FIN 0x01
-
-/*
- * We use these macros because the IP header may be at an odd address,
- * and some compilers might use word loads to get th_off or ip_hl.
- */
-
-#define get_ip6nh(x) (((unsigned char *)(x))[6])
-#define get_tcpoff(x) (((unsigned char *)(x))[12] >> 4)
-#define get_tcpflags(x) (((unsigned char *)(x))[13])
-
-static int
-ipv6_active_pkt(pkt, len)
- u_char *pkt;
- int len;
-{
- u_char *tcp;
-
- len -= PPP_HDRLEN;
- pkt += PPP_HDRLEN;
- if (len < IP6_HDRLEN)
- return 0;
- if (get_ip6nh(pkt) == IP6_NHDR_FRAG)
- return 0;
- if (get_ip6nh(pkt) != IPPROTO_TCP)
- return 1;
- if (len < IP6_HDRLEN + TCP_HDRLEN)
- return 0;
- tcp = pkt + IP6_HDRLEN;
- if ((get_tcpflags(tcp) & TH_FIN) != 0 && len == IP6_HDRLEN + get_tcpoff(tcp) * 4)
- return 0;
- return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/ipv6cp.h b/mdk-stage1/ppp/pppd/ipv6cp.h
deleted file mode 100644
index 60d366eb3..000000000
--- a/mdk-stage1/ppp/pppd/ipv6cp.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- ipv6cp.h - PPP IPV6 Control Protocol.
- Copyright (C) 1999 Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
- Redistribution and use in source and binary forms are permitted
- provided that the above copyright notice and this paragraph are
- duplicated in all such forms. The name of the author may not be
- used to endorse or promote products derived from this software
- without specific prior written permission.
- THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-*/
-
-/* Original version, based on RFC2023 :
-
- Copyright (c) 1995, 1996, 1997 Francis.Dupont@inria.fr, INRIA Rocquencourt,
- Alain.Durand@imag.fr, IMAG,
- Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
- Copyright (c) 1998, 1999 Francis.Dupont@inria.fr, GIE DYADE,
- Alain.Durand@imag.fr, IMAG,
- Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
- Ce travail a été fait au sein du GIE DYADE (Groupement d'Intéręt
- Économique ayant pour membres BULL S.A. et l'INRIA).
-
- Ce logiciel informatique est disponible aux conditions
- usuelles dans la recherche, c'est-ŕ-dire qu'il peut
- ętre utilisé, copié, modifié, distribué ŕ l'unique
- condition que ce texte soit conservé afin que
- l'origine de ce logiciel soit reconnue.
-
- Le nom de l'Institut National de Recherche en Informatique
- et en Automatique (INRIA), de l'IMAG, ou d'une personne morale
- ou physique ayant participé ŕ l'élaboration de ce logiciel ne peut
- ętre utilisé sans son accord préalable explicite.
-
- Ce logiciel est fourni tel quel sans aucune garantie,
- support ou responsabilité d'aucune sorte.
- Ce logiciel est dérivé de sources d'origine
- "University of California at Berkeley" et
- "Digital Equipment Corporation" couvertes par des copyrights.
-
- L'Institut d'Informatique et de Mathématiques Appliquées de Grenoble (IMAG)
- est une fédération d'unités mixtes de recherche du CNRS, de l'Institut National
- Polytechnique de Grenoble et de l'Université Joseph Fourier regroupant
- sept laboratoires dont le laboratoire Logiciels, Systčmes, Réseaux (LSR).
-
- This work has been done in the context of GIE DYADE (joint R & D venture
- between BULL S.A. and INRIA).
-
- This software is available with usual "research" terms
- with the aim of retain credits of the software.
- Permission to use, copy, modify and distribute this software for any
- purpose and without fee is hereby granted, provided that the above
- copyright notice and this permission notice appear in all copies,
- and the name of INRIA, IMAG, or any contributor not be used in advertising
- or publicity pertaining to this material without the prior explicit
- permission. The software is provided "as is" without any
- warranties, support or liabilities of any kind.
- This software is derived from source code from
- "University of California at Berkeley" and
- "Digital Equipment Corporation" protected by copyrights.
-
- Grenoble's Institute of Computer Science and Applied Mathematics (IMAG)
- is a federation of seven research units funded by the CNRS, National
- Polytechnic Institute of Grenoble and University Joseph Fourier.
- The research unit in Software, Systems, Networks (LSR) is member of IMAG.
-*/
-
-/*
- * Derived from :
- *
- *
- * ipcp.h - IP Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define CI_IFACEID 1 /* Interface Identifier */
-#define CI_COMPRESSTYPE 2 /* Compression Type */
-
-/* No compression types yet defined.
- *#define IPV6CP_COMP 0x004f
- */
-typedef struct ipv6cp_options {
- int neg_ifaceid; /* Negotiate interface identifier? */
- int req_ifaceid; /* Ask peer to send interface identifier? */
- int accept_local; /* accept peer's value for iface id? */
- int opt_local; /* ourtoken set by option */
- int opt_remote; /* histoken set by option */
- int use_ip; /* use IP as interface identifier */
-#if defined(SOL2)
- int use_persistent; /* use uniquely persistent value for address */
-#endif /* defined(SOL2) */
- int neg_vj; /* Van Jacobson Compression? */
- u_short vj_protocol; /* protocol value to use in VJ option */
- eui64_t ourid, hisid; /* Interface identifiers */
-} ipv6cp_options;
-
-extern fsm ipv6cp_fsm[];
-extern ipv6cp_options ipv6cp_wantoptions[];
-extern ipv6cp_options ipv6cp_gotoptions[];
-extern ipv6cp_options ipv6cp_allowoptions[];
-extern ipv6cp_options ipv6cp_hisoptions[];
-
-extern struct protent ipv6cp_protent;
diff --git a/mdk-stage1/ppp/pppd/ipxcp.c b/mdk-stage1/ppp/pppd/ipxcp.c
deleted file mode 100644
index f9a12b934..000000000
--- a/mdk-stage1/ppp/pppd/ipxcp.c
+++ /dev/null
@@ -1,1570 +0,0 @@
-/*
- * ipxcp.c - PPP IPX Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifdef IPX_CHANGE
-
-#define RCSID "$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipxcp.h"
-#include "pathnames.h"
-#include "magic.h"
-
-static const char rcsid[] = RCSID;
-
-/* global vars */
-ipxcp_options ipxcp_wantoptions[NUM_PPP]; /* Options that we want to request */
-ipxcp_options ipxcp_gotoptions[NUM_PPP]; /* Options that peer ack'd */
-ipxcp_options ipxcp_allowoptions[NUM_PPP]; /* Options we allow peer to request */
-ipxcp_options ipxcp_hisoptions[NUM_PPP]; /* Options that we ack'd */
-
-#define wo (&ipxcp_wantoptions[0])
-#define ao (&ipxcp_allowoptions[0])
-#define go (&ipxcp_gotoptions[0])
-#define ho (&ipxcp_hisoptions[0])
-
-/*
- * Callbacks for fsm code. (CI = Configuration Information)
- */
-static void ipxcp_resetci __P((fsm *)); /* Reset our CI */
-static int ipxcp_cilen __P((fsm *)); /* Return length of our CI */
-static void ipxcp_addci __P((fsm *, u_char *, int *)); /* Add our CI */
-static int ipxcp_ackci __P((fsm *, u_char *, int)); /* Peer ack'd our CI */
-static int ipxcp_nakci __P((fsm *, u_char *, int)); /* Peer nak'd our CI */
-static int ipxcp_rejci __P((fsm *, u_char *, int)); /* Peer rej'd our CI */
-static int ipxcp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv CI */
-static void ipxcp_up __P((fsm *)); /* We're UP */
-static void ipxcp_down __P((fsm *)); /* We're DOWN */
-static void ipxcp_finished __P((fsm *)); /* Don't need lower layer */
-static void ipxcp_script __P((fsm *, char *)); /* Run an up/down script */
-
-fsm ipxcp_fsm[NUM_PPP]; /* IPXCP fsm structure */
-
-static fsm_callbacks ipxcp_callbacks = { /* IPXCP callback routines */
- ipxcp_resetci, /* Reset our Configuration Information */
- ipxcp_cilen, /* Length of our Configuration Information */
- ipxcp_addci, /* Add our Configuration Information */
- ipxcp_ackci, /* ACK our Configuration Information */
- ipxcp_nakci, /* NAK our Configuration Information */
- ipxcp_rejci, /* Reject our Configuration Information */
- ipxcp_reqci, /* Request peer's Configuration Information */
- ipxcp_up, /* Called when fsm reaches OPENED state */
- ipxcp_down, /* Called when fsm leaves OPENED state */
- NULL, /* Called when we want the lower layer up */
- ipxcp_finished, /* Called when we want the lower layer down */
- NULL, /* Called when Protocol-Reject received */
- NULL, /* Retransmission is necessary */
- NULL, /* Called to handle protocol-specific codes */
- "IPXCP" /* String name of protocol */
-};
-
-/*
- * Command-line options.
- */
-static int setipxnode __P((char **));
-static void printipxnode __P((option_t *,
- void (*)(void *, char *, ...), void *));
-static int setipxname __P((char **));
-
-static option_t ipxcp_option_list[] = {
- { "ipx", o_bool, &ipxcp_protent.enabled_flag,
- "Enable IPXCP (and IPX)", OPT_PRIO | 1 },
- { "+ipx", o_bool, &ipxcp_protent.enabled_flag,
- "Enable IPXCP (and IPX)", OPT_PRIOSUB | OPT_ALIAS | 1 },
- { "noipx", o_bool, &ipxcp_protent.enabled_flag,
- "Disable IPXCP (and IPX)", OPT_PRIOSUB },
- { "-ipx", o_bool, &ipxcp_protent.enabled_flag,
- "Disable IPXCP (and IPX)", OPT_PRIOSUB | OPT_ALIAS },
-
- { "ipx-network", o_uint32, &ipxcp_wantoptions[0].our_network,
- "Set our IPX network number", OPT_PRIO, &ipxcp_wantoptions[0].neg_nn },
-
- { "ipxcp-accept-network", o_bool, &ipxcp_wantoptions[0].accept_network,
- "Accept peer IPX network number", 1,
- &ipxcp_allowoptions[0].accept_network },
-
- { "ipx-node", o_special, (void *)setipxnode,
- "Set IPX node number", OPT_A2PRINTER, (void *)printipxnode },
-
- { "ipxcp-accept-local", o_bool, &ipxcp_wantoptions[0].accept_local,
- "Accept our IPX address", 1,
- &ipxcp_allowoptions[0].accept_local },
-
- { "ipxcp-accept-remote", o_bool, &ipxcp_wantoptions[0].accept_remote,
- "Accept peer's IPX address", 1,
- &ipxcp_allowoptions[0].accept_remote },
-
- { "ipx-routing", o_int, &ipxcp_wantoptions[0].router,
- "Set IPX routing proto number", OPT_PRIO,
- &ipxcp_wantoptions[0].neg_router },
-
- { "ipx-router-name", o_special, setipxname,
- "Set IPX router name", OPT_PRIO | OPT_A2STRVAL | OPT_STATIC,
- &ipxcp_wantoptions[0].name },
-
- { "ipxcp-restart", o_int, &ipxcp_fsm[0].timeouttime,
- "Set timeout for IPXCP", OPT_PRIO },
- { "ipxcp-max-terminate", o_int, &ipxcp_fsm[0].maxtermtransmits,
- "Set max #xmits for IPXCP term-reqs", OPT_PRIO },
- { "ipxcp-max-configure", o_int, &ipxcp_fsm[0].maxconfreqtransmits,
- "Set max #xmits for IPXCP conf-reqs", OPT_PRIO },
- { "ipxcp-max-failure", o_int, &ipxcp_fsm[0].maxnakloops,
- "Set max #conf-naks for IPXCP", OPT_PRIO },
-
- { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-
-static void ipxcp_init __P((int));
-static void ipxcp_open __P((int));
-static void ipxcp_close __P((int, char *));
-static void ipxcp_lowerup __P((int));
-static void ipxcp_lowerdown __P((int));
-static void ipxcp_input __P((int, u_char *, int));
-static void ipxcp_protrej __P((int));
-static int ipxcp_printpkt __P((u_char *, int,
- void (*) __P((void *, char *, ...)), void *));
-
-struct protent ipxcp_protent = {
- PPP_IPXCP,
- ipxcp_init,
- ipxcp_input,
- ipxcp_protrej,
- ipxcp_lowerup,
- ipxcp_lowerdown,
- ipxcp_open,
- ipxcp_close,
- ipxcp_printpkt,
- NULL,
- 0,
- "IPXCP",
- "IPX",
- ipxcp_option_list,
- NULL,
- NULL,
- NULL
-};
-
-/*
- * Lengths of configuration options.
- */
-
-#define CILEN_VOID 2
-#define CILEN_COMPLETE 2 /* length of complete option */
-#define CILEN_NETN 6 /* network number length option */
-#define CILEN_NODEN 8 /* node number length option */
-#define CILEN_PROTOCOL 4 /* Minimum length of routing protocol */
-#define CILEN_NAME 3 /* Minimum length of router name */
-#define CILEN_COMPRESS 4 /* Minimum length of compression protocol */
-
-#define CODENAME(x) ((x) == CONFACK ? "ACK" : \
- (x) == CONFNAK ? "NAK" : "REJ")
-
-static int ipxcp_is_up;
-
-static char *ipx_ntoa __P((u_int32_t));
-
-/* Used in printing the node number */
-#define NODE(base) base[0], base[1], base[2], base[3], base[4], base[5]
-
-/* Used to generate the proper bit mask */
-#define BIT(num) (1 << (num))
-
-/*
- * Convert from internal to external notation
- */
-
-static short int
-to_external(internal)
-short int internal;
-{
- short int external;
-
- if (internal & BIT(IPX_NONE) )
- external = IPX_NONE;
- else
- external = RIP_SAP;
-
- return external;
-}
-
-/*
- * Make a string representation of a network IP address.
- */
-
-static char *
-ipx_ntoa(ipxaddr)
-u_int32_t ipxaddr;
-{
- static char b[64];
- slprintf(b, sizeof(b), "%x", ipxaddr);
- return b;
-}
-
-
-static u_char *
-setipxnodevalue(src,dst)
-u_char *src, *dst;
-{
- int indx;
- int item;
-
- for (;;) {
- if (!isxdigit (*src))
- break;
-
- for (indx = 0; indx < 5; ++indx) {
- dst[indx] <<= 4;
- dst[indx] |= (dst[indx + 1] >> 4) & 0x0F;
- }
-
- item = toupper (*src) - '0';
- if (item > 9)
- item -= 7;
-
- dst[5] = (dst[5] << 4) | item;
- ++src;
- }
- return src;
-}
-
-static int ipx_prio_our, ipx_prio_his;
-
-static int
-setipxnode(argv)
- char **argv;
-{
- char *end;
- int have_his = 0;
- u_char our_node[6];
- u_char his_node[6];
-
- memset (our_node, 0, 6);
- memset (his_node, 0, 6);
-
- end = setipxnodevalue (*argv, our_node);
- if (*end == ':') {
- have_his = 1;
- end = setipxnodevalue (++end, his_node);
- }
-
- if (*end == '\0') {
- ipxcp_wantoptions[0].neg_node = 1;
- if (option_priority >= ipx_prio_our) {
- memcpy(&ipxcp_wantoptions[0].our_node[0], our_node, 6);
- ipx_prio_our = option_priority;
- }
- if (have_his && option_priority >= ipx_prio_his) {
- memcpy(&ipxcp_wantoptions[0].his_node[0], his_node, 6);
- ipx_prio_his = option_priority;
- }
- return 1;
- }
-
- option_error("invalid parameter '%s' for ipx-node option", *argv);
- return 0;
-}
-
-static void
-printipxnode(opt, printer, arg)
- option_t *opt;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- unsigned char *p;
-
- p = ipxcp_wantoptions[0].our_node;
- if (ipx_prio_our)
- printer(arg, "%.2x%.2x%.2x%.2x%.2x%.2x",
- p[0], p[1], p[2], p[3], p[4], p[5]);
- printer(arg, ":");
- p = ipxcp_wantoptions[0].his_node;
- if (ipx_prio_his)
- printer(arg, "%.2x%.2x%.2x%.2x%.2x%.2x",
- p[0], p[1], p[2], p[3], p[4], p[5]);
-}
-
-static int
-setipxname (argv)
- char **argv;
-{
- char *dest = ipxcp_wantoptions[0].name;
- char *src = *argv;
- int count;
- char ch;
-
- ipxcp_wantoptions[0].neg_name = 1;
- ipxcp_allowoptions[0].neg_name = 1;
- memset (dest, '\0', sizeof (ipxcp_wantoptions[0].name));
-
- count = 0;
- while (*src) {
- ch = *src++;
- if (! isalnum (ch) && ch != '_') {
- option_error("IPX router name must be alphanumeric or _");
- return 0;
- }
-
- if (count >= sizeof (ipxcp_wantoptions[0].name) - 1) {
- option_error("IPX router name is limited to %d characters",
- sizeof (ipxcp_wantoptions[0].name) - 1);
- return 0;
- }
-
- dest[count++] = toupper (ch);
- }
- dest[count] = 0;
-
- return 1;
-}
-
-/*
- * ipxcp_init - Initialize IPXCP.
- */
-static void
-ipxcp_init(unit)
- int unit;
-{
- fsm *f = &ipxcp_fsm[unit];
-
- f->unit = unit;
- f->protocol = PPP_IPXCP;
- f->callbacks = &ipxcp_callbacks;
- fsm_init(&ipxcp_fsm[unit]);
-
- memset (wo->name, 0, sizeof (wo->name));
- memset (wo->our_node, 0, sizeof (wo->our_node));
- memset (wo->his_node, 0, sizeof (wo->his_node));
-
- wo->neg_nn = 1;
- wo->neg_complete = 1;
- wo->network = 0;
-
- ao->neg_node = 1;
- ao->neg_nn = 1;
- ao->neg_name = 1;
- ao->neg_complete = 1;
- ao->neg_router = 1;
-
- ao->accept_local = 0;
- ao->accept_remote = 0;
- ao->accept_network = 0;
-
- wo->tried_rip = 0;
- wo->tried_nlsp = 0;
-}
-
-/*
- * Copy the node number
- */
-
-static void
-copy_node (src, dst)
-u_char *src, *dst;
-{
- memcpy (dst, src, sizeof (ipxcp_wantoptions[0].our_node));
-}
-
-/*
- * Compare node numbers
- */
-
-static int
-compare_node (src, dst)
-u_char *src, *dst;
-{
- return memcmp (dst, src, sizeof (ipxcp_wantoptions[0].our_node)) == 0;
-}
-
-/*
- * Is the node number zero?
- */
-
-static int
-zero_node (node)
-u_char *node;
-{
- int indx;
- for (indx = 0; indx < sizeof (ipxcp_wantoptions[0].our_node); ++indx)
- if (node [indx] != 0)
- return 0;
- return 1;
-}
-
-/*
- * Increment the node number
- */
-
-static void
-inc_node (node)
-u_char *node;
-{
- u_char *outp;
- u_int32_t magic_num;
-
- outp = node;
- magic_num = magic();
- *outp++ = '\0';
- *outp++ = '\0';
- PUTLONG (magic_num, outp);
-}
-
-/*
- * ipxcp_open - IPXCP is allowed to come up.
- */
-static void
-ipxcp_open(unit)
- int unit;
-{
- fsm_open(&ipxcp_fsm[unit]);
-}
-
-/*
- * ipxcp_close - Take IPXCP down.
- */
-static void
-ipxcp_close(unit, reason)
- int unit;
- char *reason;
-{
- fsm_close(&ipxcp_fsm[unit], reason);
-}
-
-
-/*
- * ipxcp_lowerup - The lower layer is up.
- */
-static void
-ipxcp_lowerup(unit)
- int unit;
-{
- fsm_lowerup(&ipxcp_fsm[unit]);
-}
-
-
-/*
- * ipxcp_lowerdown - The lower layer is down.
- */
-static void
-ipxcp_lowerdown(unit)
- int unit;
-{
- fsm_lowerdown(&ipxcp_fsm[unit]);
-}
-
-
-/*
- * ipxcp_input - Input IPXCP packet.
- */
-static void
-ipxcp_input(unit, p, len)
- int unit;
- u_char *p;
- int len;
-{
- fsm_input(&ipxcp_fsm[unit], p, len);
-}
-
-
-/*
- * ipxcp_protrej - A Protocol-Reject was received for IPXCP.
- *
- * Pretend the lower layer went down, so we shut up.
- */
-static void
-ipxcp_protrej(unit)
- int unit;
-{
- fsm_lowerdown(&ipxcp_fsm[unit]);
-}
-
-
-/*
- * ipxcp_resetci - Reset our CI.
- */
-static void
-ipxcp_resetci(f)
- fsm *f;
-{
- wo->req_node = wo->neg_node && ao->neg_node;
- wo->req_nn = wo->neg_nn && ao->neg_nn;
-
- if (wo->our_network == 0) {
- wo->neg_node = 1;
- ao->accept_network = 1;
- }
-/*
- * If our node number is zero then change it.
- */
- if (zero_node (wo->our_node)) {
- inc_node (wo->our_node);
- ao->accept_local = 1;
- wo->neg_node = 1;
- }
-/*
- * If his node number is zero then change it.
- */
- if (zero_node (wo->his_node)) {
- inc_node (wo->his_node);
- ao->accept_remote = 1;
- }
-/*
- * If no routing agent was specified then we do RIP/SAP according to the
- * RFC documents. If you have specified something then OK. Otherwise, we
- * do RIP/SAP.
- */
- if (ao->router == 0) {
- ao->router |= BIT(RIP_SAP);
- wo->router |= BIT(RIP_SAP);
- }
-
- /* Always specify a routing protocol unless it was REJected. */
- wo->neg_router = 1;
-/*
- * Start with these default values
- */
- *go = *wo;
-}
-
-/*
- * ipxcp_cilen - Return length of our CI.
- */
-
-static int
-ipxcp_cilen(f)
- fsm *f;
-{
- int len;
-
- len = go->neg_nn ? CILEN_NETN : 0;
- len += go->neg_node ? CILEN_NODEN : 0;
- len += go->neg_name ? CILEN_NAME + strlen (go->name) - 1 : 0;
-
- /* RFC says that defaults should not be included. */
- if (go->neg_router && to_external(go->router) != RIP_SAP)
- len += CILEN_PROTOCOL;
-
- return (len);
-}
-
-
-/*
- * ipxcp_addci - Add our desired CIs to a packet.
- */
-static void
-ipxcp_addci(f, ucp, lenp)
- fsm *f;
- u_char *ucp;
- int *lenp;
-{
-/*
- * Add the options to the record.
- */
- if (go->neg_nn) {
- PUTCHAR (IPX_NETWORK_NUMBER, ucp);
- PUTCHAR (CILEN_NETN, ucp);
- PUTLONG (go->our_network, ucp);
- }
-
- if (go->neg_node) {
- int indx;
- PUTCHAR (IPX_NODE_NUMBER, ucp);
- PUTCHAR (CILEN_NODEN, ucp);
- for (indx = 0; indx < sizeof (go->our_node); ++indx)
- PUTCHAR (go->our_node[indx], ucp);
- }
-
- if (go->neg_name) {
- int cilen = strlen (go->name);
- int indx;
- PUTCHAR (IPX_ROUTER_NAME, ucp);
- PUTCHAR (CILEN_NAME + cilen - 1, ucp);
- for (indx = 0; indx < cilen; ++indx)
- PUTCHAR (go->name [indx], ucp);
- }
-
- if (go->neg_router) {
- short external = to_external (go->router);
- if (external != RIP_SAP) {
- PUTCHAR (IPX_ROUTER_PROTOCOL, ucp);
- PUTCHAR (CILEN_PROTOCOL, ucp);
- PUTSHORT (external, ucp);
- }
- }
-}
-
-/*
- * ipxcp_ackci - Ack our CIs.
- *
- * Returns:
- * 0 - Ack was bad.
- * 1 - Ack was good.
- */
-static int
-ipxcp_ackci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- u_short cilen, citype, cishort;
- u_char cichar;
- u_int32_t cilong;
-
-#define ACKCIVOID(opt, neg) \
- if (neg) { \
- if ((len -= CILEN_VOID) < 0) \
- break; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_VOID || \
- citype != opt) \
- break; \
- }
-
-#define ACKCICOMPLETE(opt,neg) ACKCIVOID(opt, neg)
-
-#define ACKCICHARS(opt, neg, val, cnt) \
- if (neg) { \
- int indx, count = cnt; \
- len -= (count + 2); \
- if (len < 0) \
- break; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != (count + 2) || \
- citype != opt) \
- break; \
- for (indx = 0; indx < count; ++indx) {\
- GETCHAR(cichar, p); \
- if (cichar != ((u_char *) &val)[indx]) \
- break; \
- }\
- if (indx != count) \
- break; \
- }
-
-#define ACKCINODE(opt,neg,val) ACKCICHARS(opt,neg,val,sizeof(val))
-#define ACKCINAME(opt,neg,val) ACKCICHARS(opt,neg,val,strlen(val))
-
-#define ACKCINETWORK(opt, neg, val) \
- if (neg) { \
- if ((len -= CILEN_NETN) < 0) \
- break; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_NETN || \
- citype != opt) \
- break; \
- GETLONG(cilong, p); \
- if (cilong != val) \
- break; \
- }
-
-#define ACKCIPROTO(opt, neg, val) \
- if (neg) { \
- if (len < 2) \
- break; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_PROTOCOL || citype != opt) \
- break; \
- len -= cilen; \
- if (len < 0) \
- break; \
- GETSHORT(cishort, p); \
- if (cishort != to_external (val) || cishort == RIP_SAP) \
- break; \
- }
-/*
- * Process the ACK frame in the order in which the frame was assembled
- */
- do {
- ACKCINETWORK (IPX_NETWORK_NUMBER, go->neg_nn, go->our_network);
- ACKCINODE (IPX_NODE_NUMBER, go->neg_node, go->our_node);
- ACKCINAME (IPX_ROUTER_NAME, go->neg_name, go->name);
- if (len > 0)
- ACKCIPROTO (IPX_ROUTER_PROTOCOL, go->neg_router, go->router);
-/*
- * This is the end of the record.
- */
- if (len == 0)
- return (1);
- } while (0);
-/*
- * The frame is invalid
- */
- IPXCPDEBUG(("ipxcp_ackci: received bad Ack!"));
- return (0);
-}
-
-/*
- * ipxcp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if IPXCP is in the OPENED state.
- *
- * Returns:
- * 0 - Nak was bad.
- * 1 - Nak was good.
- */
-
-static int
-ipxcp_nakci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- u_char citype, cilen, *next;
- u_short s;
- u_int32_t l;
- ipxcp_options no; /* options we've seen Naks for */
- ipxcp_options try; /* options to request next time */
-
- BZERO(&no, sizeof(no));
- try = *go;
-
- while (len > CILEN_VOID) {
- GETCHAR (citype, p);
- GETCHAR (cilen, p);
- len -= cilen;
- if (len < 0)
- goto bad;
- next = &p [cilen - CILEN_VOID];
-
- switch (citype) {
- case IPX_NETWORK_NUMBER:
- if (!go->neg_nn || no.neg_nn || (cilen != CILEN_NETN))
- goto bad;
- no.neg_nn = 1;
-
- GETLONG(l, p);
- if (l && ao->accept_network)
- try.our_network = l;
- break;
-
- case IPX_NODE_NUMBER:
- if (!go->neg_node || no.neg_node || (cilen != CILEN_NODEN))
- goto bad;
- no.neg_node = 1;
-
- if (!zero_node (p) && ao->accept_local &&
- ! compare_node (p, ho->his_node))
- copy_node (p, try.our_node);
- break;
-
- /* This has never been sent. Ignore the NAK frame */
- case IPX_COMPRESSION_PROTOCOL:
- goto bad;
-
- case IPX_ROUTER_PROTOCOL:
- if (!go->neg_router || (cilen < CILEN_PROTOCOL))
- goto bad;
-
- GETSHORT (s, p);
- if (s > 15) /* This is just bad, but ignore for now. */
- break;
-
- s = BIT(s);
- if (no.router & s) /* duplicate NAKs are always bad */
- goto bad;
-
- if (no.router == 0) /* Reset on first NAK only */
- try.router = 0;
-
- no.router |= s;
- try.router |= s;
- try.neg_router = 1;
- break;
-
- /* These, according to the RFC, must never be NAKed. */
- case IPX_ROUTER_NAME:
- case IPX_COMPLETE:
- goto bad;
-
- /* These are for options which we have not seen. */
- default:
- break;
- }
- p = next;
- }
-
- /*
- * Do not permit the peer to force a router protocol which we do not
- * support. However, default to the condition that will accept "NONE".
- */
- try.router &= (ao->router | BIT(IPX_NONE));
- if (try.router == 0 && ao->router != 0)
- try.router = BIT(IPX_NONE);
-
- if (try.router != 0)
- try.neg_router = 1;
-
- /*
- * OK, the Nak is good. Now we can update state.
- * If there are any options left, we ignore them.
- */
- if (f->state != OPENED)
- *go = try;
-
- return 1;
-
-bad:
- IPXCPDEBUG(("ipxcp_nakci: received bad Nak!"));
- return 0;
-}
-
-/*
- * ipxcp_rejci - Reject some of our CIs.
- */
-static int
-ipxcp_rejci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- u_short cilen, citype, cishort;
- u_char cichar;
- u_int32_t cilong;
- ipxcp_options try; /* options to request next time */
-
-#define REJCINETWORK(opt, neg, val) \
- if (neg && p[0] == opt) { \
- if ((len -= CILEN_NETN) < 0) \
- break; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_NETN || \
- citype != opt) \
- break; \
- GETLONG(cilong, p); \
- if (cilong != val) \
- break; \
- neg = 0; \
- }
-
-#define REJCICHARS(opt, neg, val, cnt) \
- if (neg && p[0] == opt) { \
- int indx, count = cnt; \
- len -= (count + 2); \
- if (len < 0) \
- break; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != (count + 2) || \
- citype != opt) \
- break; \
- for (indx = 0; indx < count; ++indx) {\
- GETCHAR(cichar, p); \
- if (cichar != ((u_char *) &val)[indx]) \
- break; \
- }\
- if (indx != count) \
- break; \
- neg = 0; \
- }
-
-#define REJCINODE(opt,neg,val) REJCICHARS(opt,neg,val,sizeof(val))
-#define REJCINAME(opt,neg,val) REJCICHARS(opt,neg,val,strlen(val))
-
-#define REJCIVOID(opt, neg) \
- if (neg && p[0] == opt) { \
- if ((len -= CILEN_VOID) < 0) \
- break; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_VOID || citype != opt) \
- break; \
- neg = 0; \
- }
-
-/* a reject for RIP/SAP is invalid since we don't send it and you can't
- reject something which is not sent. (You can NAK, but you can't REJ.) */
-#define REJCIPROTO(opt, neg, val, bit) \
- if (neg && p[0] == opt) { \
- if ((len -= CILEN_PROTOCOL) < 0) \
- break; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_PROTOCOL) \
- break; \
- GETSHORT(cishort, p); \
- if (cishort != to_external (val) || cishort == RIP_SAP) \
- break; \
- neg = 0; \
- }
-/*
- * Any Rejected CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
- try = *go;
-
- do {
- REJCINETWORK (IPX_NETWORK_NUMBER, try.neg_nn, try.our_network);
- REJCINODE (IPX_NODE_NUMBER, try.neg_node, try.our_node);
- REJCINAME (IPX_ROUTER_NAME, try.neg_name, try.name);
- REJCIPROTO (IPX_ROUTER_PROTOCOL, try.neg_router, try.router, 0);
-/*
- * This is the end of the record.
- */
- if (len == 0) {
- if (f->state != OPENED)
- *go = try;
- return (1);
- }
- } while (0);
-/*
- * The frame is invalid at this point.
- */
- IPXCPDEBUG(("ipxcp_rejci: received bad Reject!"));
- return 0;
-}
-
-/*
- * ipxcp_reqci - Check the peer's requested CIs and send appropriate response.
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately. If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-ipxcp_reqci(f, inp, len, reject_if_disagree)
- fsm *f;
- u_char *inp; /* Requested CIs */
- int *len; /* Length of requested CIs */
- int reject_if_disagree;
-{
- u_char *cip, *next; /* Pointer to current and next CIs */
- u_short cilen, citype; /* Parsed len, type */
- u_short cishort; /* Parsed short value */
- u_int32_t cinetwork; /* Parsed address values */
- int rc = CONFACK; /* Final packet return code */
- int orc; /* Individual option return code */
- u_char *p; /* Pointer to next char to parse */
- u_char *ucp = inp; /* Pointer to current output char */
- int l = *len; /* Length left */
-
- /*
- * Reset all his options.
- */
- BZERO(ho, sizeof(*ho));
-
- /*
- * Process all his options.
- */
- next = inp;
- while (l) {
- orc = CONFACK; /* Assume success */
- cip = p = next; /* Remember begining of CI */
- if (l < 2 || /* Not enough data for CI header or */
- p[1] < 2 || /* CI length too small or */
- p[1] > l) { /* CI length too big? */
- IPXCPDEBUG(("ipxcp_reqci: bad CI length!"));
- orc = CONFREJ; /* Reject bad CI */
- cilen = l; /* Reject till end of packet */
- l = 0; /* Don't loop again */
- goto endswitch;
- }
- GETCHAR(citype, p); /* Parse CI type */
- GETCHAR(cilen, p); /* Parse CI length */
- l -= cilen; /* Adjust remaining length */
- next += cilen; /* Step to next CI */
-
- switch (citype) { /* Check CI type */
-/*
- * The network number must match. Choose the larger of the two.
- */
- case IPX_NETWORK_NUMBER:
- /* if we wont negotiate the network number or the length is wrong
- then reject the option */
- if ( !ao->neg_nn || cilen != CILEN_NETN ) {
- orc = CONFREJ;
- break;
- }
- GETLONG(cinetwork, p);
-
- /* If the network numbers match then acknowledge them. */
- if (cinetwork != 0) {
- ho->his_network = cinetwork;
- ho->neg_nn = 1;
- if (wo->our_network == cinetwork)
- break;
-/*
- * If the network number is not given or we don't accept their change or
- * the network number is too small then NAK it.
- */
- if (! ao->accept_network || cinetwork < wo->our_network) {
- DECPTR (sizeof (u_int32_t), p);
- PUTLONG (wo->our_network, p);
- orc = CONFNAK;
- }
- break;
- }
-/*
- * The peer sent '0' for the network. Give it ours if we have one.
- */
- if (go->our_network != 0) {
- DECPTR (sizeof (u_int32_t), p);
- PUTLONG (wo->our_network, p);
- orc = CONFNAK;
-/*
- * We don't have one. Reject the value.
- */
- } else
- orc = CONFREJ;
-
- break;
-/*
- * The node number is required
- */
- case IPX_NODE_NUMBER:
- /* if we wont negotiate the node number or the length is wrong
- then reject the option */
- if ( cilen != CILEN_NODEN ) {
- orc = CONFREJ;
- break;
- }
-
- copy_node (p, ho->his_node);
- ho->neg_node = 1;
-/*
- * If the remote does not have a number and we do then NAK it with the value
- * which we have for it. (We never have a default value of zero.)
- */
- if (zero_node (ho->his_node)) {
- orc = CONFNAK;
- copy_node (wo->his_node, p);
- INCPTR (sizeof (wo->his_node), p);
- break;
- }
-/*
- * If you have given me the expected network node number then I'll accept
- * it now.
- */
- if (compare_node (wo->his_node, ho->his_node)) {
- orc = CONFACK;
- ho->neg_node = 1;
- INCPTR (sizeof (wo->his_node), p);
- break;
- }
-/*
- * If his node number is the same as ours then ask him to try the next
- * value.
- */
- if (compare_node (ho->his_node, go->our_node)) {
- inc_node (ho->his_node);
- orc = CONFNAK;
- copy_node (ho->his_node, p);
- INCPTR (sizeof (wo->his_node), p);
- break;
- }
-/*
- * If we don't accept a new value then NAK it.
- */
- if (! ao->accept_remote) {
- copy_node (wo->his_node, p);
- INCPTR (sizeof (wo->his_node), p);
- orc = CONFNAK;
- break;
- }
- orc = CONFACK;
- ho->neg_node = 1;
- INCPTR (sizeof (wo->his_node), p);
- break;
-/*
- * Compression is not desired at this time. It is always rejected.
- */
- case IPX_COMPRESSION_PROTOCOL:
- orc = CONFREJ;
- break;
-/*
- * The routing protocol is a bitmask of various types. Any combination
- * of the values RIP_SAP and NLSP are permissible. 'IPX_NONE' for no
- * routing protocol must be specified only once.
- */
- case IPX_ROUTER_PROTOCOL:
- if ( !ao->neg_router || cilen < CILEN_PROTOCOL ) {
- orc = CONFREJ;
- break;
- }
-
- GETSHORT (cishort, p);
-
- if (wo->neg_router == 0) {
- wo->neg_router = 1;
- wo->router = BIT(IPX_NONE);
- }
-
- if ((cishort == IPX_NONE && ho->router != 0) ||
- (ho->router & BIT(IPX_NONE))) {
- orc = CONFREJ;
- break;
- }
-
- cishort = BIT(cishort);
- if (ho->router & cishort) {
- orc = CONFREJ;
- break;
- }
-
- ho->router |= cishort;
- ho->neg_router = 1;
-
- /* Finally do not allow a router protocol which we do not
- support. */
-
- if ((cishort & (ao->router | BIT(IPX_NONE))) == 0) {
- int protocol;
-
- if (cishort == BIT(NLSP) &&
- (ao->router & BIT(RIP_SAP)) &&
- !wo->tried_rip) {
- protocol = RIP_SAP;
- wo->tried_rip = 1;
- } else
- protocol = IPX_NONE;
-
- DECPTR (sizeof (u_int16_t), p);
- PUTSHORT (protocol, p);
- orc = CONFNAK;
- }
- break;
-/*
- * The router name is advisorary. Just accept it if it is not too large.
- */
- case IPX_ROUTER_NAME:
- if (cilen >= CILEN_NAME) {
- int name_size = cilen - CILEN_NAME;
- if (name_size > sizeof (ho->name))
- name_size = sizeof (ho->name) - 1;
- memset (ho->name, 0, sizeof (ho->name));
- memcpy (ho->name, p, name_size);
- ho->name [name_size] = '\0';
- ho->neg_name = 1;
- orc = CONFACK;
- break;
- }
- orc = CONFREJ;
- break;
-/*
- * This is advisorary.
- */
- case IPX_COMPLETE:
- if (cilen != CILEN_COMPLETE)
- orc = CONFREJ;
- else {
- ho->neg_complete = 1;
- orc = CONFACK;
- }
- break;
-/*
- * All other entries are not known at this time.
- */
- default:
- orc = CONFREJ;
- break;
- }
-endswitch:
- if (orc == CONFACK && /* Good CI */
- rc != CONFACK) /* but prior CI wasnt? */
- continue; /* Don't send this one */
-
- if (orc == CONFNAK) { /* Nak this CI? */
- if (reject_if_disagree) /* Getting fed up with sending NAKs? */
- orc = CONFREJ; /* Get tough if so */
- if (rc == CONFREJ) /* Rejecting prior CI? */
- continue; /* Don't send this one */
- if (rc == CONFACK) { /* Ack'd all prior CIs? */
- rc = CONFNAK; /* Not anymore... */
- ucp = inp; /* Backup */
- }
- }
-
- if (orc == CONFREJ && /* Reject this CI */
- rc != CONFREJ) { /* but no prior ones? */
- rc = CONFREJ;
- ucp = inp; /* Backup */
- }
-
- /* Need to move CI? */
- if (ucp != cip)
- BCOPY(cip, ucp, cilen); /* Move it */
-
- /* Update output pointer */
- INCPTR(cilen, ucp);
- }
-
- /*
- * If we aren't rejecting this packet, and we want to negotiate
- * their address, and they didn't send their address, then we
- * send a NAK with a IPX_NODE_NUMBER option appended. We assume the
- * input buffer is long enough that we can append the extra
- * option safely.
- */
-
- if (rc != CONFREJ && !ho->neg_node &&
- wo->req_nn && !reject_if_disagree) {
- if (rc == CONFACK) {
- rc = CONFNAK;
- wo->req_nn = 0; /* don't ask again */
- ucp = inp; /* reset pointer */
- }
-
- if (zero_node (wo->his_node))
- inc_node (wo->his_node);
-
- PUTCHAR (IPX_NODE_NUMBER, ucp);
- PUTCHAR (CILEN_NODEN, ucp);
- copy_node (wo->his_node, ucp);
- INCPTR (sizeof (wo->his_node), ucp);
- }
-
- *len = ucp - inp; /* Compute output length */
- IPXCPDEBUG(("ipxcp: returning Configure-%s", CODENAME(rc)));
- return (rc); /* Return final code */
-}
-
-/*
- * ipxcp_up - IPXCP has come UP.
- *
- * Configure the IP network interface appropriately and bring it up.
- */
-
-static void
-ipxcp_up(f)
- fsm *f;
-{
- int unit = f->unit;
-
- IPXCPDEBUG(("ipxcp: up"));
-
- /* The default router protocol is RIP/SAP. */
- if (ho->router == 0)
- ho->router = BIT(RIP_SAP);
-
- if (go->router == 0)
- go->router = BIT(RIP_SAP);
-
- /* Fetch the network number */
- if (!ho->neg_nn)
- ho->his_network = wo->his_network;
-
- if (!ho->neg_node)
- copy_node (wo->his_node, ho->his_node);
-
- if (!wo->neg_node && !go->neg_node)
- copy_node (wo->our_node, go->our_node);
-
- if (zero_node (go->our_node)) {
- static char errmsg[] = "Could not determine local IPX node address";
- if (debug)
- error(errmsg);
- ipxcp_close(f->unit, errmsg);
- return;
- }
-
- go->network = go->our_network;
- if (ho->his_network != 0 && ho->his_network > go->network)
- go->network = ho->his_network;
-
- if (go->network == 0) {
- static char errmsg[] = "Can not determine network number";
- if (debug)
- error(errmsg);
- ipxcp_close (unit, errmsg);
- return;
- }
-
- /* bring the interface up */
- if (!sifup(unit)) {
- if (debug)
- warn("sifup failed (IPX)");
- ipxcp_close(unit, "Interface configuration failed");
- return;
- }
- ipxcp_is_up = 1;
-
- /* set the network number for IPX */
- if (!sipxfaddr(unit, go->network, go->our_node)) {
- if (debug)
- warn("sipxfaddr failed");
- ipxcp_close(unit, "Interface configuration failed");
- return;
- }
-
- np_up(f->unit, PPP_IPX);
-
- /*
- * Execute the ipx-up script, like this:
- * /etc/ppp/ipx-up interface tty speed local-IPX remote-IPX
- */
-
- ipxcp_script (f, _PATH_IPXUP);
-}
-
-/*
- * ipxcp_down - IPXCP has gone DOWN.
- *
- * Take the IP network interface down, clear its addresses
- * and delete routes through it.
- */
-
-static void
-ipxcp_down(f)
- fsm *f;
-{
- IPXCPDEBUG(("ipxcp: down"));
-
- if (!ipxcp_is_up)
- return;
- ipxcp_is_up = 0;
- np_down(f->unit, PPP_IPX);
- cipxfaddr(f->unit);
- sifnpmode(f->unit, PPP_IPX, NPMODE_DROP);
- sifdown(f->unit);
- ipxcp_script (f, _PATH_IPXDOWN);
-}
-
-
-/*
- * ipxcp_finished - possibly shut down the lower layers.
- */
-static void
-ipxcp_finished(f)
- fsm *f;
-{
- np_finished(f->unit, PPP_IPX);
-}
-
-
-/*
- * ipxcp_script - Execute a script with arguments
- * interface-name tty-name speed local-IPX remote-IPX networks.
- */
-static void
-ipxcp_script(f, script)
- fsm *f;
- char *script;
-{
- char strspeed[32], strlocal[32], strremote[32];
- char strnetwork[32], strpid[32];
- char *argv[14], strproto_lcl[32], strproto_rmt[32];
-
- slprintf(strpid, sizeof(strpid), "%d", getpid());
- slprintf(strspeed, sizeof(strspeed),"%d", baud_rate);
-
- strproto_lcl[0] = '\0';
- if (go->neg_router && ((go->router & BIT(IPX_NONE)) == 0)) {
- if (go->router & BIT(RIP_SAP))
- strlcpy (strproto_lcl, "RIP ", sizeof(strproto_lcl));
- if (go->router & BIT(NLSP))
- strlcat (strproto_lcl, "NLSP ", sizeof(strproto_lcl));
- }
-
- if (strproto_lcl[0] == '\0')
- strlcpy (strproto_lcl, "NONE ", sizeof(strproto_lcl));
-
- strproto_lcl[strlen (strproto_lcl)-1] = '\0';
-
- strproto_rmt[0] = '\0';
- if (ho->neg_router && ((ho->router & BIT(IPX_NONE)) == 0)) {
- if (ho->router & BIT(RIP_SAP))
- strlcpy (strproto_rmt, "RIP ", sizeof(strproto_rmt));
- if (ho->router & BIT(NLSP))
- strlcat (strproto_rmt, "NLSP ", sizeof(strproto_rmt));
- }
-
- if (strproto_rmt[0] == '\0')
- strlcpy (strproto_rmt, "NONE ", sizeof(strproto_rmt));
-
- strproto_rmt[strlen (strproto_rmt)-1] = '\0';
-
- strlcpy (strnetwork, ipx_ntoa (go->network), sizeof(strnetwork));
-
- slprintf (strlocal, sizeof(strlocal), "%0.6B", go->our_node);
-
- slprintf (strremote, sizeof(strremote), "%0.6B", ho->his_node);
-
- argv[0] = script;
- argv[1] = ifname;
- argv[2] = devnam;
- argv[3] = strspeed;
- argv[4] = strnetwork;
- argv[5] = strlocal;
- argv[6] = strremote;
- argv[7] = strproto_lcl;
- argv[8] = strproto_rmt;
- argv[9] = go->name;
- argv[10] = ho->name;
- argv[11] = ipparam;
- argv[12] = strpid;
- argv[13] = NULL;
- run_program(script, argv, 0, NULL, NULL);
-}
-
-/*
- * ipxcp_printpkt - print the contents of an IPXCP packet.
- */
-static char *ipxcp_codenames[] = {
- "ConfReq", "ConfAck", "ConfNak", "ConfRej",
- "TermReq", "TermAck", "CodeRej"
-};
-
-static int
-ipxcp_printpkt(p, plen, printer, arg)
- u_char *p;
- int plen;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int code, id, len, olen;
- u_char *pstart, *optend;
- u_short cishort;
- u_int32_t cilong;
-
- if (plen < HEADERLEN)
- return 0;
- pstart = p;
- GETCHAR(code, p);
- GETCHAR(id, p);
- GETSHORT(len, p);
- if (len < HEADERLEN || len > plen)
- return 0;
-
- if (code >= 1 && code <= sizeof(ipxcp_codenames) / sizeof(char *))
- printer(arg, " %s", ipxcp_codenames[code-1]);
- else
- printer(arg, " code=0x%x", code);
- printer(arg, " id=0x%x", id);
- len -= HEADERLEN;
- switch (code) {
- case CONFREQ:
- case CONFACK:
- case CONFNAK:
- case CONFREJ:
- /* print option list */
- while (len >= 2) {
- GETCHAR(code, p);
- GETCHAR(olen, p);
- p -= 2;
- if (olen < CILEN_VOID || olen > len) {
- break;
- }
- printer(arg, " <");
- len -= olen;
- optend = p + olen;
- switch (code) {
- case IPX_NETWORK_NUMBER:
- if (olen == CILEN_NETN) {
- p += 2;
- GETLONG(cilong, p);
- printer (arg, "network %s", ipx_ntoa (cilong));
- }
- break;
- case IPX_NODE_NUMBER:
- if (olen == CILEN_NODEN) {
- p += 2;
- printer (arg, "node ");
- while (p < optend) {
- GETCHAR(code, p);
- printer(arg, "%.2x", (int) (unsigned int) (unsigned char) code);
- }
- }
- break;
- case IPX_COMPRESSION_PROTOCOL:
- if (olen == CILEN_COMPRESS) {
- p += 2;
- GETSHORT (cishort, p);
- printer (arg, "compression %d", (int) cishort);
- }
- break;
- case IPX_ROUTER_PROTOCOL:
- if (olen == CILEN_PROTOCOL) {
- p += 2;
- GETSHORT (cishort, p);
- printer (arg, "router proto %d", (int) cishort);
- }
- break;
- case IPX_ROUTER_NAME:
- if (olen >= CILEN_NAME) {
- p += 2;
- printer (arg, "router name \"");
- while (p < optend) {
- GETCHAR(code, p);
- if (code >= 0x20 && code <= 0x7E)
- printer (arg, "%c", (int) (unsigned int) (unsigned char) code);
- else
- printer (arg, " \\%.2x", (int) (unsigned int) (unsigned char) code);
- }
- printer (arg, "\"");
- }
- break;
- case IPX_COMPLETE:
- if (olen == CILEN_COMPLETE) {
- p += 2;
- printer (arg, "complete");
- }
- break;
- default:
- break;
- }
-
- while (p < optend) {
- GETCHAR(code, p);
- printer(arg, " %.2x", (int) (unsigned int) (unsigned char) code);
- }
- printer(arg, ">");
- }
- break;
-
- case TERMACK:
- case TERMREQ:
- if (len > 0 && *p >= ' ' && *p < 0x7f) {
- printer(arg, " ");
- print_string(p, len, printer, arg);
- p += len;
- len = 0;
- }
- break;
- }
-
- /* print the rest of the bytes in the packet */
- for (; len > 0; --len) {
- GETCHAR(code, p);
- printer(arg, " %.2x", (int) (unsigned int) (unsigned char) code);
- }
-
- return p - pstart;
-}
-#endif /* ifdef IPX_CHANGE */
diff --git a/mdk-stage1/ppp/pppd/ipxcp.h b/mdk-stage1/ppp/pppd/ipxcp.h
deleted file mode 100644
index 47f680d70..000000000
--- a/mdk-stage1/ppp/pppd/ipxcp.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * ipxcp.h - IPX Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define IPX_NETWORK_NUMBER 1 /* IPX Network Number */
-#define IPX_NODE_NUMBER 2
-#define IPX_COMPRESSION_PROTOCOL 3
-#define IPX_ROUTER_PROTOCOL 4
-#define IPX_ROUTER_NAME 5
-#define IPX_COMPLETE 6
-
-/* Values for the router protocol */
-#define IPX_NONE 0
-#define RIP_SAP 2
-#define NLSP 4
-
-typedef struct ipxcp_options {
- bool neg_node; /* Negotiate IPX node number? */
- bool req_node; /* Ask peer to send IPX node number? */
-
- bool neg_nn; /* Negotiate IPX network number? */
- bool req_nn; /* Ask peer to send IPX network number */
-
- bool neg_name; /* Negotiate IPX router name */
- bool neg_complete; /* Negotiate completion */
- bool neg_router; /* Negotiate IPX router number */
-
- bool accept_local; /* accept peer's value for ournode */
- bool accept_remote; /* accept peer's value for hisnode */
- bool accept_network; /* accept network number */
-
- bool tried_nlsp; /* I have suggested NLSP already */
- bool tried_rip; /* I have suggested RIP/SAP already */
-
- u_int32_t his_network; /* base network number */
- u_int32_t our_network; /* our value for network number */
- u_int32_t network; /* the final network number */
-
- u_char his_node[6]; /* peer's node number */
- u_char our_node[6]; /* our node number */
- u_char name [48]; /* name of the router */
- int router; /* routing protocol */
-} ipxcp_options;
-
-extern fsm ipxcp_fsm[];
-extern ipxcp_options ipxcp_wantoptions[];
-extern ipxcp_options ipxcp_gotoptions[];
-extern ipxcp_options ipxcp_allowoptions[];
-extern ipxcp_options ipxcp_hisoptions[];
-
-extern struct protent ipxcp_protent;
diff --git a/mdk-stage1/ppp/pppd/lcp.c b/mdk-stage1/ppp/pppd/lcp.c
deleted file mode 100644
index 41c58cad5..000000000
--- a/mdk-stage1/ppp/pppd/lcp.c
+++ /dev/null
@@ -1,2224 +0,0 @@
-/*
- * lcp.c - PPP Link Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "chap.h"
-#include "magic.h"
-
-static const char rcsid[] = RCSID;
-
-/*
- * When the link comes up we want to be able to wait for a short while,
- * or until seeing some input from the peer, before starting to send
- * configure-requests. We do this by delaying the fsm_lowerup call.
- */
-/* steal a bit in fsm flags word */
-#define DELAYED_UP 0x100
-
-static void lcp_delayed_up __P((void *));
-
-/*
- * LCP-related command-line options.
- */
-int lcp_echo_interval = 0; /* Interval between LCP echo-requests */
-int lcp_echo_fails = 0; /* Tolerance to unanswered echo-requests */
-bool lax_recv = 0; /* accept control chars in asyncmap */
-bool noendpoint = 0; /* don't send/accept endpoint discriminator */
-
-static int noopt __P((char **));
-
-#ifdef HAVE_MULTILINK
-static int setendpoint __P((char **));
-static void printendpoint __P((option_t *, void (*)(void *, char *, ...),
- void *));
-#endif /* HAVE_MULTILINK */
-
-static option_t lcp_option_list[] = {
- /* LCP options */
- { "-all", o_special_noarg, (void *)noopt,
- "Don't request/allow any LCP options" },
-
- { "noaccomp", o_bool, &lcp_wantoptions[0].neg_accompression,
- "Disable address/control compression",
- OPT_A2CLR, &lcp_allowoptions[0].neg_accompression },
- { "-ac", o_bool, &lcp_wantoptions[0].neg_accompression,
- "Disable address/control compression",
- OPT_ALIAS | OPT_A2CLR, &lcp_allowoptions[0].neg_accompression },
-
- { "asyncmap", o_uint32, &lcp_wantoptions[0].asyncmap,
- "Set asyncmap (for received packets)",
- OPT_OR, &lcp_wantoptions[0].neg_asyncmap },
- { "-as", o_uint32, &lcp_wantoptions[0].asyncmap,
- "Set asyncmap (for received packets)",
- OPT_ALIAS | OPT_OR, &lcp_wantoptions[0].neg_asyncmap },
- { "default-asyncmap", o_uint32, &lcp_wantoptions[0].asyncmap,
- "Disable asyncmap negotiation",
- OPT_OR | OPT_NOARG | OPT_VAL(~0U) | OPT_A2CLR,
- &lcp_allowoptions[0].neg_asyncmap },
- { "-am", o_uint32, &lcp_wantoptions[0].asyncmap,
- "Disable asyncmap negotiation",
- OPT_ALIAS | OPT_OR | OPT_NOARG | OPT_VAL(~0U) | OPT_A2CLR,
- &lcp_allowoptions[0].neg_asyncmap },
-
- { "nomagic", o_bool, &lcp_wantoptions[0].neg_magicnumber,
- "Disable magic number negotiation (looped-back line detection)",
- OPT_A2CLR, &lcp_allowoptions[0].neg_magicnumber },
- { "-mn", o_bool, &lcp_wantoptions[0].neg_magicnumber,
- "Disable magic number negotiation (looped-back line detection)",
- OPT_ALIAS | OPT_A2CLR, &lcp_allowoptions[0].neg_magicnumber },
-
- { "mru", o_int, &lcp_wantoptions[0].mru,
- "Set MRU (maximum received packet size) for negotiation",
- OPT_PRIO, &lcp_wantoptions[0].neg_mru },
- { "default-mru", o_bool, &lcp_wantoptions[0].neg_mru,
- "Disable MRU negotiation (use default 1500)",
- OPT_PRIOSUB | OPT_A2CLR, &lcp_allowoptions[0].neg_mru },
- { "-mru", o_bool, &lcp_wantoptions[0].neg_mru,
- "Disable MRU negotiation (use default 1500)",
- OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, &lcp_allowoptions[0].neg_mru },
-
- { "mtu", o_int, &lcp_allowoptions[0].mru,
- "Set our MTU", OPT_LIMITS, NULL, MAXMRU, MINMRU },
-
- { "nopcomp", o_bool, &lcp_wantoptions[0].neg_pcompression,
- "Disable protocol field compression",
- OPT_A2CLR, &lcp_allowoptions[0].neg_pcompression },
- { "-pc", o_bool, &lcp_wantoptions[0].neg_pcompression,
- "Disable protocol field compression",
- OPT_ALIAS | OPT_A2CLR, &lcp_allowoptions[0].neg_pcompression },
-
- { "passive", o_bool, &lcp_wantoptions[0].passive,
- "Set passive mode", 1 },
- { "-p", o_bool, &lcp_wantoptions[0].passive,
- "Set passive mode", OPT_ALIAS | 1 },
-
- { "silent", o_bool, &lcp_wantoptions[0].silent,
- "Set silent mode", 1 },
-
- { "lcp-echo-failure", o_int, &lcp_echo_fails,
- "Set number of consecutive echo failures to indicate link failure",
- OPT_PRIO },
- { "lcp-echo-interval", o_int, &lcp_echo_interval,
- "Set time in seconds between LCP echo requests", OPT_PRIO },
- { "lcp-restart", o_int, &lcp_fsm[0].timeouttime,
- "Set time in seconds between LCP retransmissions", OPT_PRIO },
- { "lcp-max-terminate", o_int, &lcp_fsm[0].maxtermtransmits,
- "Set maximum number of LCP terminate-request transmissions", OPT_PRIO },
- { "lcp-max-configure", o_int, &lcp_fsm[0].maxconfreqtransmits,
- "Set maximum number of LCP configure-request transmissions", OPT_PRIO },
- { "lcp-max-failure", o_int, &lcp_fsm[0].maxnakloops,
- "Set limit on number of LCP configure-naks", OPT_PRIO },
-
- { "receive-all", o_bool, &lax_recv,
- "Accept all received control characters", 1 },
-
-#ifdef HAVE_MULTILINK
- { "mrru", o_int, &lcp_wantoptions[0].mrru,
- "Maximum received packet size for multilink bundle",
- OPT_PRIO, &lcp_wantoptions[0].neg_mrru },
-
- { "mpshortseq", o_bool, &lcp_wantoptions[0].neg_ssnhf,
- "Use short sequence numbers in multilink headers",
- OPT_PRIO | 1, &lcp_allowoptions[0].neg_ssnhf },
- { "nompshortseq", o_bool, &lcp_wantoptions[0].neg_ssnhf,
- "Don't use short sequence numbers in multilink headers",
- OPT_PRIOSUB | OPT_A2CLR, &lcp_allowoptions[0].neg_ssnhf },
-
- { "endpoint", o_special, (void *) setendpoint,
- "Endpoint discriminator for multilink",
- OPT_PRIO | OPT_A2PRINTER, (void *) printendpoint },
-#endif /* HAVE_MULTILINK */
-
- { "noendpoint", o_bool, &noendpoint,
- "Don't send or accept multilink endpoint discriminator", 1 },
-
- {NULL}
-};
-
-/* global vars */
-fsm lcp_fsm[NUM_PPP]; /* LCP fsm structure (global)*/
-lcp_options lcp_wantoptions[NUM_PPP]; /* Options that we want to request */
-lcp_options lcp_gotoptions[NUM_PPP]; /* Options that peer ack'd */
-lcp_options lcp_allowoptions[NUM_PPP]; /* Options we allow peer to request */
-lcp_options lcp_hisoptions[NUM_PPP]; /* Options that we ack'd */
-
-static int lcp_echos_pending = 0; /* Number of outstanding echo msgs */
-static int lcp_echo_number = 0; /* ID number of next echo frame */
-static int lcp_echo_timer_running = 0; /* set if a timer is running */
-
-static u_char nak_buffer[PPP_MRU]; /* where we construct a nak packet */
-
-/*
- * Callbacks for fsm code. (CI = Configuration Information)
- */
-static void lcp_resetci __P((fsm *)); /* Reset our CI */
-static int lcp_cilen __P((fsm *)); /* Return length of our CI */
-static void lcp_addci __P((fsm *, u_char *, int *)); /* Add our CI to pkt */
-static int lcp_ackci __P((fsm *, u_char *, int)); /* Peer ack'd our CI */
-static int lcp_nakci __P((fsm *, u_char *, int)); /* Peer nak'd our CI */
-static int lcp_rejci __P((fsm *, u_char *, int)); /* Peer rej'd our CI */
-static int lcp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv peer CI */
-static void lcp_up __P((fsm *)); /* We're UP */
-static void lcp_down __P((fsm *)); /* We're DOWN */
-static void lcp_starting __P((fsm *)); /* We need lower layer up */
-static void lcp_finished __P((fsm *)); /* We need lower layer down */
-static int lcp_extcode __P((fsm *, int, int, u_char *, int));
-static void lcp_rprotrej __P((fsm *, u_char *, int));
-
-/*
- * routines to send LCP echos to peer
- */
-
-static void lcp_echo_lowerup __P((int));
-static void lcp_echo_lowerdown __P((int));
-static void LcpEchoTimeout __P((void *));
-static void lcp_received_echo_reply __P((fsm *, int, u_char *, int));
-static void LcpSendEchoRequest __P((fsm *));
-static void LcpLinkFailure __P((fsm *));
-static void LcpEchoCheck __P((fsm *));
-
-static fsm_callbacks lcp_callbacks = { /* LCP callback routines */
- lcp_resetci, /* Reset our Configuration Information */
- lcp_cilen, /* Length of our Configuration Information */
- lcp_addci, /* Add our Configuration Information */
- lcp_ackci, /* ACK our Configuration Information */
- lcp_nakci, /* NAK our Configuration Information */
- lcp_rejci, /* Reject our Configuration Information */
- lcp_reqci, /* Request peer's Configuration Information */
- lcp_up, /* Called when fsm reaches OPENED state */
- lcp_down, /* Called when fsm leaves OPENED state */
- lcp_starting, /* Called when we want the lower layer up */
- lcp_finished, /* Called when we want the lower layer down */
- NULL, /* Called when Protocol-Reject received */
- NULL, /* Retransmission is necessary */
- lcp_extcode, /* Called to handle LCP-specific codes */
- "LCP" /* String name of protocol */
-};
-
-/*
- * Protocol entry points.
- * Some of these are called directly.
- */
-
-static void lcp_init __P((int));
-static void lcp_input __P((int, u_char *, int));
-static void lcp_protrej __P((int));
-static int lcp_printpkt __P((u_char *, int,
- void (*) __P((void *, char *, ...)), void *));
-
-struct protent lcp_protent = {
- PPP_LCP,
- lcp_init,
- lcp_input,
- lcp_protrej,
- lcp_lowerup,
- lcp_lowerdown,
- lcp_open,
- lcp_close,
- lcp_printpkt,
- NULL,
- 1,
- "LCP",
- NULL,
- lcp_option_list,
- NULL,
- NULL,
- NULL
-};
-
-int lcp_loopbackfail = DEFLOOPBACKFAIL;
-
-/*
- * Length of each type of configuration option (in octets)
- */
-#define CILEN_VOID 2
-#define CILEN_CHAR 3
-#define CILEN_SHORT 4 /* CILEN_VOID + 2 */
-#define CILEN_CHAP 5 /* CILEN_VOID + 2 + 1 */
-#define CILEN_LONG 6 /* CILEN_VOID + 4 */
-#define CILEN_LQR 8 /* CILEN_VOID + 2 + 4 */
-#define CILEN_CBCP 3
-
-#define CODENAME(x) ((x) == CONFACK ? "ACK" : \
- (x) == CONFNAK ? "NAK" : "REJ")
-
-/*
- * noopt - Disable all options (why?).
- */
-static int
-noopt(argv)
- char **argv;
-{
- BZERO((char *) &lcp_wantoptions[0], sizeof (struct lcp_options));
- BZERO((char *) &lcp_allowoptions[0], sizeof (struct lcp_options));
-
- return (1);
-}
-
-#ifdef HAVE_MULTILINK
-static int
-setendpoint(argv)
- char **argv;
-{
- if (str_to_epdisc(&lcp_wantoptions[0].endpoint, *argv)) {
- lcp_wantoptions[0].neg_endpoint = 1;
- return 1;
- }
- option_error("Can't parse '%s' as an endpoint discriminator", *argv);
- return 0;
-}
-
-static void
-printendpoint(opt, printer, arg)
- option_t *opt;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- printer(arg, "%s", epdisc_to_str(&lcp_wantoptions[0].endpoint));
-}
-#endif /* HAVE_MULTILINK */
-
-/*
- * lcp_init - Initialize LCP.
- */
-static void
-lcp_init(unit)
- int unit;
-{
- fsm *f = &lcp_fsm[unit];
- lcp_options *wo = &lcp_wantoptions[unit];
- lcp_options *ao = &lcp_allowoptions[unit];
-
- f->unit = unit;
- f->protocol = PPP_LCP;
- f->callbacks = &lcp_callbacks;
-
- fsm_init(f);
-
- BZERO(wo, sizeof(*wo));
- wo->neg_mru = 1;
- wo->mru = DEFMRU;
- wo->neg_asyncmap = 1;
- wo->chap_mdtype = CHAP_DIGEST_MD5;
- wo->neg_magicnumber = 1;
- wo->neg_pcompression = 1;
- wo->neg_accompression = 1;
-
- BZERO(ao, sizeof(*ao));
- ao->neg_mru = 1;
- ao->mru = MAXMRU;
- ao->neg_asyncmap = 1;
- ao->neg_chap = 1;
- ao->chap_mdtype = CHAP_DIGEST_MD5;
- ao->neg_upap = 1;
- ao->neg_magicnumber = 1;
- ao->neg_pcompression = 1;
- ao->neg_accompression = 1;
-#ifdef CBCP_SUPPORT
- ao->neg_cbcp = 1;
-#endif
- ao->neg_endpoint = 1;
-}
-
-
-/*
- * lcp_open - LCP is allowed to come up.
- */
-void
-lcp_open(unit)
- int unit;
-{
- fsm *f = &lcp_fsm[unit];
- lcp_options *wo = &lcp_wantoptions[unit];
-
- f->flags &= ~(OPT_PASSIVE | OPT_SILENT);
- if (wo->passive)
- f->flags |= OPT_PASSIVE;
- if (wo->silent)
- f->flags |= OPT_SILENT;
- fsm_open(f);
-}
-
-
-/*
- * lcp_close - Take LCP down.
- */
-void
-lcp_close(unit, reason)
- int unit;
- char *reason;
-{
- fsm *f = &lcp_fsm[unit];
-
- if (phase != PHASE_DEAD)
- new_phase(PHASE_TERMINATE);
- if (f->state == STOPPED && f->flags & (OPT_PASSIVE|OPT_SILENT)) {
- /*
- * This action is not strictly according to the FSM in RFC1548,
- * but it does mean that the program terminates if you do a
- * lcp_close() in passive/silent mode when a connection hasn't
- * been established.
- */
- f->state = CLOSED;
- lcp_finished(f);
-
- } else
- fsm_close(&lcp_fsm[unit], reason);
-}
-
-
-/*
- * lcp_lowerup - The lower layer is up.
- */
-void
-lcp_lowerup(unit)
- int unit;
-{
- lcp_options *wo = &lcp_wantoptions[unit];
- fsm *f = &lcp_fsm[unit];
-
- /*
- * Don't use A/C or protocol compression on transmission,
- * but accept A/C and protocol compressed packets
- * if we are going to ask for A/C and protocol compression.
- */
- ppp_send_config(unit, PPP_MRU, 0xffffffff, 0, 0);
- ppp_recv_config(unit, PPP_MRU, (lax_recv? 0: 0xffffffff),
- wo->neg_pcompression, wo->neg_accompression);
- peer_mru[unit] = PPP_MRU;
-
- if (listen_time != 0) {
- f->flags |= DELAYED_UP;
- timeout(lcp_delayed_up, f, 0, listen_time * 1000);
- } else
- fsm_lowerup(f);
-}
-
-
-/*
- * lcp_lowerdown - The lower layer is down.
- */
-void
-lcp_lowerdown(unit)
- int unit;
-{
- fsm *f = &lcp_fsm[unit];
-
- if (f->flags & DELAYED_UP)
- f->flags &= ~DELAYED_UP;
- else
- fsm_lowerdown(&lcp_fsm[unit]);
-}
-
-
-/*
- * lcp_delayed_up - Bring the lower layer up now.
- */
-static void
-lcp_delayed_up(arg)
- void *arg;
-{
- fsm *f = arg;
-
- if (f->flags & DELAYED_UP) {
- f->flags &= ~DELAYED_UP;
- fsm_lowerup(f);
- }
-}
-
-
-/*
- * lcp_input - Input LCP packet.
- */
-static void
-lcp_input(unit, p, len)
- int unit;
- u_char *p;
- int len;
-{
- fsm *f = &lcp_fsm[unit];
-
- if (f->flags & DELAYED_UP) {
- f->flags &= ~DELAYED_UP;
- fsm_lowerup(f);
- }
- fsm_input(f, p, len);
-}
-
-
-/*
- * lcp_extcode - Handle a LCP-specific code.
- */
-static int
-lcp_extcode(f, code, id, inp, len)
- fsm *f;
- int code, id;
- u_char *inp;
- int len;
-{
- u_char *magp;
-
- switch( code ){
- case PROTREJ:
- lcp_rprotrej(f, inp, len);
- break;
-
- case ECHOREQ:
- if (f->state != OPENED)
- break;
- magp = inp;
- PUTLONG(lcp_gotoptions[f->unit].magicnumber, magp);
- fsm_sdata(f, ECHOREP, id, inp, len);
- break;
-
- case ECHOREP:
- lcp_received_echo_reply(f, id, inp, len);
- break;
-
- case DISCREQ:
- break;
-
- default:
- return 0;
- }
- return 1;
-}
-
-
-/*
- * lcp_rprotrej - Receive an Protocol-Reject.
- *
- * Figure out which protocol is rejected and inform it.
- */
-static void
-lcp_rprotrej(f, inp, len)
- fsm *f;
- u_char *inp;
- int len;
-{
- int i;
- struct protent *protp;
- u_short prot;
-
- if (len < 2) {
- LCPDEBUG(("lcp_rprotrej: Rcvd short Protocol-Reject packet!"));
- return;
- }
-
- GETSHORT(prot, inp);
-
- /*
- * Protocol-Reject packets received in any state other than the LCP
- * OPENED state SHOULD be silently discarded.
- */
- if( f->state != OPENED ){
- LCPDEBUG(("Protocol-Reject discarded: LCP in state %d", f->state));
- return;
- }
-
- /*
- * Upcall the proper Protocol-Reject routine.
- */
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (protp->protocol == prot && protp->enabled_flag) {
- (*protp->protrej)(f->unit);
- return;
- }
-
- warn("Protocol-Reject for unsupported protocol 0x%x", prot);
-}
-
-
-/*
- * lcp_protrej - A Protocol-Reject was received.
- */
-/*ARGSUSED*/
-static void
-lcp_protrej(unit)
- int unit;
-{
- /*
- * Can't reject LCP!
- */
- error("Received Protocol-Reject for LCP!");
- fsm_protreject(&lcp_fsm[unit]);
-}
-
-
-/*
- * lcp_sprotrej - Send a Protocol-Reject for some protocol.
- */
-void
-lcp_sprotrej(unit, p, len)
- int unit;
- u_char *p;
- int len;
-{
- /*
- * Send back the protocol and the information field of the
- * rejected packet. We only get here if LCP is in the OPENED state.
- */
- p += 2;
- len -= 2;
-
- fsm_sdata(&lcp_fsm[unit], PROTREJ, ++lcp_fsm[unit].id,
- p, len);
-}
-
-
-/*
- * lcp_resetci - Reset our CI.
- */
-static void
-lcp_resetci(f)
- fsm *f;
-{
- lcp_options *wo = &lcp_wantoptions[f->unit];
- lcp_options *go = &lcp_gotoptions[f->unit];
- lcp_options *ao = &lcp_allowoptions[f->unit];
-
- wo->magicnumber = magic();
- wo->numloops = 0;
- *go = *wo;
- if (!multilink) {
- go->neg_mrru = 0;
- go->neg_ssnhf = 0;
- go->neg_endpoint = 0;
- }
- if (noendpoint)
- ao->neg_endpoint = 0;
- peer_mru[f->unit] = PPP_MRU;
- auth_reset(f->unit);
-}
-
-
-/*
- * lcp_cilen - Return length of our CI.
- */
-static int
-lcp_cilen(f)
- fsm *f;
-{
- lcp_options *go = &lcp_gotoptions[f->unit];
-
-#define LENCIVOID(neg) ((neg) ? CILEN_VOID : 0)
-#define LENCICHAP(neg) ((neg) ? CILEN_CHAP : 0)
-#define LENCISHORT(neg) ((neg) ? CILEN_SHORT : 0)
-#define LENCILONG(neg) ((neg) ? CILEN_LONG : 0)
-#define LENCILQR(neg) ((neg) ? CILEN_LQR: 0)
-#define LENCICBCP(neg) ((neg) ? CILEN_CBCP: 0)
- /*
- * NB: we only ask for one of CHAP and UPAP, even if we will
- * accept either.
- */
- return (LENCISHORT(go->neg_mru && go->mru != DEFMRU) +
- LENCILONG(go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF) +
- LENCICHAP(go->neg_chap) +
- LENCISHORT(!go->neg_chap && go->neg_upap) +
- LENCILQR(go->neg_lqr) +
- LENCICBCP(go->neg_cbcp) +
- LENCILONG(go->neg_magicnumber) +
- LENCIVOID(go->neg_pcompression) +
- LENCIVOID(go->neg_accompression) +
- LENCISHORT(go->neg_mrru) +
- LENCIVOID(go->neg_ssnhf) +
- (go->neg_endpoint? CILEN_CHAR + go->endpoint.length: 0));
-}
-
-
-/*
- * lcp_addci - Add our desired CIs to a packet.
- */
-static void
-lcp_addci(f, ucp, lenp)
- fsm *f;
- u_char *ucp;
- int *lenp;
-{
- lcp_options *go = &lcp_gotoptions[f->unit];
- u_char *start_ucp = ucp;
-
-#define ADDCIVOID(opt, neg) \
- if (neg) { \
- PUTCHAR(opt, ucp); \
- PUTCHAR(CILEN_VOID, ucp); \
- }
-#define ADDCISHORT(opt, neg, val) \
- if (neg) { \
- PUTCHAR(opt, ucp); \
- PUTCHAR(CILEN_SHORT, ucp); \
- PUTSHORT(val, ucp); \
- }
-#define ADDCICHAP(opt, neg, val, digest) \
- if (neg) { \
- PUTCHAR(opt, ucp); \
- PUTCHAR(CILEN_CHAP, ucp); \
- PUTSHORT(val, ucp); \
- PUTCHAR(digest, ucp); \
- }
-#define ADDCILONG(opt, neg, val) \
- if (neg) { \
- PUTCHAR(opt, ucp); \
- PUTCHAR(CILEN_LONG, ucp); \
- PUTLONG(val, ucp); \
- }
-#define ADDCILQR(opt, neg, val) \
- if (neg) { \
- PUTCHAR(opt, ucp); \
- PUTCHAR(CILEN_LQR, ucp); \
- PUTSHORT(PPP_LQR, ucp); \
- PUTLONG(val, ucp); \
- }
-#define ADDCICHAR(opt, neg, val) \
- if (neg) { \
- PUTCHAR(opt, ucp); \
- PUTCHAR(CILEN_CHAR, ucp); \
- PUTCHAR(val, ucp); \
- }
-#define ADDCIENDP(opt, neg, class, val, len) \
- if (neg) { \
- int i; \
- PUTCHAR(opt, ucp); \
- PUTCHAR(CILEN_CHAR + len, ucp); \
- PUTCHAR(class, ucp); \
- for (i = 0; i < len; ++i) \
- PUTCHAR(val[i], ucp); \
- }
-
- ADDCISHORT(CI_MRU, go->neg_mru && go->mru != DEFMRU, go->mru);
- ADDCILONG(CI_ASYNCMAP, go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF,
- go->asyncmap);
- ADDCICHAP(CI_AUTHTYPE, go->neg_chap, PPP_CHAP, go->chap_mdtype);
- ADDCISHORT(CI_AUTHTYPE, !go->neg_chap && go->neg_upap, PPP_PAP);
- ADDCILQR(CI_QUALITY, go->neg_lqr, go->lqr_period);
- ADDCICHAR(CI_CALLBACK, go->neg_cbcp, CBCP_OPT);
- ADDCILONG(CI_MAGICNUMBER, go->neg_magicnumber, go->magicnumber);
- ADDCIVOID(CI_PCOMPRESSION, go->neg_pcompression);
- ADDCIVOID(CI_ACCOMPRESSION, go->neg_accompression);
- ADDCISHORT(CI_MRRU, go->neg_mrru, go->mrru);
- ADDCIVOID(CI_SSNHF, go->neg_ssnhf);
- ADDCIENDP(CI_EPDISC, go->neg_endpoint, go->endpoint.class,
- go->endpoint.value, go->endpoint.length);
-
- if (ucp - start_ucp != *lenp) {
- /* this should never happen, because peer_mtu should be 1500 */
- error("Bug in lcp_addci: wrong length");
- }
-}
-
-
-/*
- * lcp_ackci - Ack our CIs.
- * This should not modify any state if the Ack is bad.
- *
- * Returns:
- * 0 - Ack was bad.
- * 1 - Ack was good.
- */
-static int
-lcp_ackci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- lcp_options *go = &lcp_gotoptions[f->unit];
- u_char cilen, citype, cichar;
- u_short cishort;
- u_int32_t cilong;
-
- /*
- * CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-#define ACKCIVOID(opt, neg) \
- if (neg) { \
- if ((len -= CILEN_VOID) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_VOID || \
- citype != opt) \
- goto bad; \
- }
-#define ACKCISHORT(opt, neg, val) \
- if (neg) { \
- if ((len -= CILEN_SHORT) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_SHORT || \
- citype != opt) \
- goto bad; \
- GETSHORT(cishort, p); \
- if (cishort != val) \
- goto bad; \
- }
-#define ACKCICHAR(opt, neg, val) \
- if (neg) { \
- if ((len -= CILEN_CHAR) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_CHAR || \
- citype != opt) \
- goto bad; \
- GETCHAR(cichar, p); \
- if (cichar != val) \
- goto bad; \
- }
-#define ACKCICHAP(opt, neg, val, digest) \
- if (neg) { \
- if ((len -= CILEN_CHAP) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_CHAP || \
- citype != opt) \
- goto bad; \
- GETSHORT(cishort, p); \
- if (cishort != val) \
- goto bad; \
- GETCHAR(cichar, p); \
- if (cichar != digest) \
- goto bad; \
- }
-#define ACKCILONG(opt, neg, val) \
- if (neg) { \
- if ((len -= CILEN_LONG) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_LONG || \
- citype != opt) \
- goto bad; \
- GETLONG(cilong, p); \
- if (cilong != val) \
- goto bad; \
- }
-#define ACKCILQR(opt, neg, val) \
- if (neg) { \
- if ((len -= CILEN_LQR) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_LQR || \
- citype != opt) \
- goto bad; \
- GETSHORT(cishort, p); \
- if (cishort != PPP_LQR) \
- goto bad; \
- GETLONG(cilong, p); \
- if (cilong != val) \
- goto bad; \
- }
-#define ACKCIENDP(opt, neg, class, val, vlen) \
- if (neg) { \
- int i; \
- if ((len -= CILEN_CHAR + vlen) < 0) \
- goto bad; \
- GETCHAR(citype, p); \
- GETCHAR(cilen, p); \
- if (cilen != CILEN_CHAR + vlen || \
- citype != opt) \
- goto bad; \
- GETCHAR(cichar, p); \
- if (cichar != class) \
- goto bad; \
- for (i = 0; i < vlen; ++i) { \
- GETCHAR(cichar, p); \
- if (cichar != val[i]) \
- goto bad; \
- } \
- }
-
- ACKCISHORT(CI_MRU, go->neg_mru && go->mru != DEFMRU, go->mru);
- ACKCILONG(CI_ASYNCMAP, go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF,
- go->asyncmap);
- ACKCICHAP(CI_AUTHTYPE, go->neg_chap, PPP_CHAP, go->chap_mdtype);
- ACKCISHORT(CI_AUTHTYPE, !go->neg_chap && go->neg_upap, PPP_PAP);
- ACKCILQR(CI_QUALITY, go->neg_lqr, go->lqr_period);
- ACKCICHAR(CI_CALLBACK, go->neg_cbcp, CBCP_OPT);
- ACKCILONG(CI_MAGICNUMBER, go->neg_magicnumber, go->magicnumber);
- ACKCIVOID(CI_PCOMPRESSION, go->neg_pcompression);
- ACKCIVOID(CI_ACCOMPRESSION, go->neg_accompression);
- ACKCISHORT(CI_MRRU, go->neg_mrru, go->mrru);
- ACKCIVOID(CI_SSNHF, go->neg_ssnhf);
- ACKCIENDP(CI_EPDISC, go->neg_endpoint, go->endpoint.class,
- go->endpoint.value, go->endpoint.length);
-
- /*
- * If there are any remaining CIs, then this packet is bad.
- */
- if (len != 0)
- goto bad;
- return (1);
-bad:
- LCPDEBUG(("lcp_acki: received bad Ack!"));
- return (0);
-}
-
-
-/*
- * lcp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if LCP is in the OPENED state.
- *
- * Returns:
- * 0 - Nak was bad.
- * 1 - Nak was good.
- */
-static int
-lcp_nakci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- lcp_options *go = &lcp_gotoptions[f->unit];
- lcp_options *wo = &lcp_wantoptions[f->unit];
- u_char citype, cichar, *next;
- u_short cishort;
- u_int32_t cilong;
- lcp_options no; /* options we've seen Naks for */
- lcp_options try; /* options to request next time */
- int looped_back = 0;
- int cilen;
-
- BZERO(&no, sizeof(no));
- try = *go;
-
- /*
- * Any Nak'd CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-#define NAKCIVOID(opt, neg) \
- if (go->neg && \
- len >= CILEN_VOID && \
- p[1] == CILEN_VOID && \
- p[0] == opt) { \
- len -= CILEN_VOID; \
- INCPTR(CILEN_VOID, p); \
- no.neg = 1; \
- try.neg = 0; \
- }
-#define NAKCICHAP(opt, neg, code) \
- if (go->neg && \
- len >= CILEN_CHAP && \
- p[1] == CILEN_CHAP && \
- p[0] == opt) { \
- len -= CILEN_CHAP; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- GETCHAR(cichar, p); \
- no.neg = 1; \
- code \
- }
-#define NAKCICHAR(opt, neg, code) \
- if (go->neg && \
- len >= CILEN_CHAR && \
- p[1] == CILEN_CHAR && \
- p[0] == opt) { \
- len -= CILEN_CHAR; \
- INCPTR(2, p); \
- GETCHAR(cichar, p); \
- no.neg = 1; \
- code \
- }
-#define NAKCISHORT(opt, neg, code) \
- if (go->neg && \
- len >= CILEN_SHORT && \
- p[1] == CILEN_SHORT && \
- p[0] == opt) { \
- len -= CILEN_SHORT; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- no.neg = 1; \
- code \
- }
-#define NAKCILONG(opt, neg, code) \
- if (go->neg && \
- len >= CILEN_LONG && \
- p[1] == CILEN_LONG && \
- p[0] == opt) { \
- len -= CILEN_LONG; \
- INCPTR(2, p); \
- GETLONG(cilong, p); \
- no.neg = 1; \
- code \
- }
-#define NAKCILQR(opt, neg, code) \
- if (go->neg && \
- len >= CILEN_LQR && \
- p[1] == CILEN_LQR && \
- p[0] == opt) { \
- len -= CILEN_LQR; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- GETLONG(cilong, p); \
- no.neg = 1; \
- code \
- }
-#define NAKCIENDP(opt, neg) \
- if (go->neg && \
- len >= CILEN_CHAR && \
- p[0] == opt && \
- p[1] >= CILEN_CHAR && \
- p[1] <= len) { \
- len -= p[1]; \
- INCPTR(p[1], p); \
- no.neg = 1; \
- try.neg = 0; \
- }
-
- /*
- * We don't care if they want to send us smaller packets than
- * we want. Therefore, accept any MRU less than what we asked for,
- * but then ignore the new value when setting the MRU in the kernel.
- * If they send us a bigger MRU than what we asked, accept it, up to
- * the limit of the default MRU we'd get if we didn't negotiate.
- */
- if (go->neg_mru && go->mru != DEFMRU) {
- NAKCISHORT(CI_MRU, neg_mru,
- if (cishort <= wo->mru || cishort <= DEFMRU)
- try.mru = cishort;
- );
- }
-
- /*
- * Add any characters they want to our (receive-side) asyncmap.
- */
- if (go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF) {
- NAKCILONG(CI_ASYNCMAP, neg_asyncmap,
- try.asyncmap = go->asyncmap | cilong;
- );
- }
-
- /*
- * If they've nak'd our authentication-protocol, check whether
- * they are proposing a different protocol, or a different
- * hash algorithm for CHAP.
- */
- if ((go->neg_chap || go->neg_upap)
- && len >= CILEN_SHORT
- && p[0] == CI_AUTHTYPE && p[1] >= CILEN_SHORT && p[1] <= len) {
- cilen = p[1];
- len -= cilen;
- no.neg_chap = go->neg_chap;
- no.neg_upap = go->neg_upap;
- INCPTR(2, p);
- GETSHORT(cishort, p);
- if (cishort == PPP_PAP && cilen == CILEN_SHORT) {
- /*
- * If we were asking for CHAP, they obviously don't want to do it.
- * If we weren't asking for CHAP, then we were asking for PAP,
- * in which case this Nak is bad.
- */
- if (!go->neg_chap)
- goto bad;
- try.neg_chap = 0;
-
- } else if (cishort == PPP_CHAP && cilen == CILEN_CHAP) {
- GETCHAR(cichar, p);
- if (go->neg_chap) {
- /*
- * We were asking for CHAP/MD5; they must want a different
- * algorithm. If they can't do MD5, we can ask for M$-CHAP
- * if we support it, otherwise we'll have to stop
- * asking for CHAP.
- */
- if (cichar != go->chap_mdtype) {
-#ifdef CHAPMS
- if (cichar == CHAP_MICROSOFT)
- go->chap_mdtype = CHAP_MICROSOFT;
- else
-#endif /* CHAPMS */
- try.neg_chap = 0;
- }
- } else {
- /*
- * Stop asking for PAP if we were asking for it.
- */
- try.neg_upap = 0;
- }
-
- } else {
- /*
- * We don't recognize what they're suggesting.
- * Stop asking for what we were asking for.
- */
- if (go->neg_chap)
- try.neg_chap = 0;
- else
- try.neg_upap = 0;
- p += cilen - CILEN_SHORT;
- }
- }
-
- /*
- * If they can't cope with our link quality protocol, we'll have
- * to stop asking for LQR. We haven't got any other protocol.
- * If they Nak the reporting period, take their value XXX ?
- */
- NAKCILQR(CI_QUALITY, neg_lqr,
- if (cishort != PPP_LQR)
- try.neg_lqr = 0;
- else
- try.lqr_period = cilong;
- );
-
- /*
- * Only implementing CBCP...not the rest of the callback options
- */
- NAKCICHAR(CI_CALLBACK, neg_cbcp,
- try.neg_cbcp = 0;
- );
-
- /*
- * Check for a looped-back line.
- */
- NAKCILONG(CI_MAGICNUMBER, neg_magicnumber,
- try.magicnumber = magic();
- looped_back = 1;
- );
-
- /*
- * Peer shouldn't send Nak for protocol compression or
- * address/control compression requests; they should send
- * a Reject instead. If they send a Nak, treat it as a Reject.
- */
- NAKCIVOID(CI_PCOMPRESSION, neg_pcompression);
- NAKCIVOID(CI_ACCOMPRESSION, neg_accompression);
-
- /*
- * Nak for MRRU option - accept their value if it is smaller
- * than the one we want.
- */
- if (go->neg_mrru) {
- NAKCISHORT(CI_MRRU, neg_mrru,
- if (cishort <= wo->mrru)
- try.mrru = cishort;
- );
- }
-
- /*
- * Nak for short sequence numbers shouldn't be sent, treat it
- * like a reject.
- */
- NAKCIVOID(CI_SSNHF, neg_ssnhf);
-
- /*
- * Nak of the endpoint discriminator option is not permitted,
- * treat it like a reject.
- */
- NAKCIENDP(CI_EPDISC, neg_endpoint);
-
- /*
- * There may be remaining CIs, if the peer is requesting negotiation
- * on an option that we didn't include in our request packet.
- * If we see an option that we requested, or one we've already seen
- * in this packet, then this packet is bad.
- * If we wanted to respond by starting to negotiate on the requested
- * option(s), we could, but we don't, because except for the
- * authentication type and quality protocol, if we are not negotiating
- * an option, it is because we were told not to.
- * For the authentication type, the Nak from the peer means
- * `let me authenticate myself with you' which is a bit pointless.
- * For the quality protocol, the Nak means `ask me to send you quality
- * reports', but if we didn't ask for them, we don't want them.
- * An option we don't recognize represents the peer asking to
- * negotiate some option we don't support, so ignore it.
- */
- while (len > CILEN_VOID) {
- GETCHAR(citype, p);
- GETCHAR(cilen, p);
- if (cilen < CILEN_VOID || (len -= cilen) < 0)
- goto bad;
- next = p + cilen - 2;
-
- switch (citype) {
- case CI_MRU:
- if ((go->neg_mru && go->mru != DEFMRU)
- || no.neg_mru || cilen != CILEN_SHORT)
- goto bad;
- GETSHORT(cishort, p);
- if (cishort < DEFMRU) {
- try.neg_mru = 1;
- try.mru = cishort;
- }
- break;
- case CI_ASYNCMAP:
- if ((go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF)
- || no.neg_asyncmap || cilen != CILEN_LONG)
- goto bad;
- break;
- case CI_AUTHTYPE:
- if (go->neg_chap || no.neg_chap || go->neg_upap || no.neg_upap)
- goto bad;
- break;
- case CI_MAGICNUMBER:
- if (go->neg_magicnumber || no.neg_magicnumber ||
- cilen != CILEN_LONG)
- goto bad;
- break;
- case CI_PCOMPRESSION:
- if (go->neg_pcompression || no.neg_pcompression
- || cilen != CILEN_VOID)
- goto bad;
- break;
- case CI_ACCOMPRESSION:
- if (go->neg_accompression || no.neg_accompression
- || cilen != CILEN_VOID)
- goto bad;
- break;
- case CI_QUALITY:
- if (go->neg_lqr || no.neg_lqr || cilen != CILEN_LQR)
- goto bad;
- break;
- case CI_MRRU:
- if (go->neg_mrru || no.neg_mrru || cilen != CILEN_SHORT)
- goto bad;
- break;
- case CI_SSNHF:
- if (go->neg_ssnhf || no.neg_ssnhf || cilen != CILEN_VOID)
- goto bad;
- try.neg_ssnhf = 1;
- break;
- case CI_EPDISC:
- if (go->neg_endpoint || no.neg_endpoint || cilen < CILEN_CHAR)
- goto bad;
- break;
- }
- p = next;
- }
-
- /*
- * OK, the Nak is good. Now we can update state.
- * If there are any options left we ignore them.
- */
- if (f->state != OPENED) {
- if (looped_back) {
- if (++try.numloops >= lcp_loopbackfail) {
- notice("Serial line is looped back.");
- lcp_close(f->unit, "Loopback detected");
- status = EXIT_LOOPBACK;
- }
- } else
- try.numloops = 0;
- *go = try;
- }
-
- return 1;
-
-bad:
- LCPDEBUG(("lcp_nakci: received bad Nak!"));
- return 0;
-}
-
-
-/*
- * lcp_rejci - Peer has Rejected some of our CIs.
- * This should not modify any state if the Reject is bad
- * or if LCP is in the OPENED state.
- *
- * Returns:
- * 0 - Reject was bad.
- * 1 - Reject was good.
- */
-static int
-lcp_rejci(f, p, len)
- fsm *f;
- u_char *p;
- int len;
-{
- lcp_options *go = &lcp_gotoptions[f->unit];
- u_char cichar;
- u_short cishort;
- u_int32_t cilong;
- lcp_options try; /* options to request next time */
-
- try = *go;
-
- /*
- * Any Rejected CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-#define REJCIVOID(opt, neg) \
- if (go->neg && \
- len >= CILEN_VOID && \
- p[1] == CILEN_VOID && \
- p[0] == opt) { \
- len -= CILEN_VOID; \
- INCPTR(CILEN_VOID, p); \
- try.neg = 0; \
- }
-#define REJCISHORT(opt, neg, val) \
- if (go->neg && \
- len >= CILEN_SHORT && \
- p[1] == CILEN_SHORT && \
- p[0] == opt) { \
- len -= CILEN_SHORT; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- /* Check rejected value. */ \
- if (cishort != val) \
- goto bad; \
- try.neg = 0; \
- }
-#define REJCICHAP(opt, neg, val, digest) \
- if (go->neg && \
- len >= CILEN_CHAP && \
- p[1] == CILEN_CHAP && \
- p[0] == opt) { \
- len -= CILEN_CHAP; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- GETCHAR(cichar, p); \
- /* Check rejected value. */ \
- if (cishort != val || cichar != digest) \
- goto bad; \
- try.neg = 0; \
- try.neg_upap = 0; \
- }
-#define REJCILONG(opt, neg, val) \
- if (go->neg && \
- len >= CILEN_LONG && \
- p[1] == CILEN_LONG && \
- p[0] == opt) { \
- len -= CILEN_LONG; \
- INCPTR(2, p); \
- GETLONG(cilong, p); \
- /* Check rejected value. */ \
- if (cilong != val) \
- goto bad; \
- try.neg = 0; \
- }
-#define REJCILQR(opt, neg, val) \
- if (go->neg && \
- len >= CILEN_LQR && \
- p[1] == CILEN_LQR && \
- p[0] == opt) { \
- len -= CILEN_LQR; \
- INCPTR(2, p); \
- GETSHORT(cishort, p); \
- GETLONG(cilong, p); \
- /* Check rejected value. */ \
- if (cishort != PPP_LQR || cilong != val) \
- goto bad; \
- try.neg = 0; \
- }
-#define REJCICBCP(opt, neg, val) \
- if (go->neg && \
- len >= CILEN_CBCP && \
- p[1] == CILEN_CBCP && \
- p[0] == opt) { \
- len -= CILEN_CBCP; \
- INCPTR(2, p); \
- GETCHAR(cichar, p); \
- /* Check rejected value. */ \
- if (cichar != val) \
- goto bad; \
- try.neg = 0; \
- }
-#define REJCIENDP(opt, neg, class, val, vlen) \
- if (go->neg && \
- len >= CILEN_CHAR + vlen && \
- p[0] == opt && \
- p[1] == CILEN_CHAR + vlen) { \
- int i; \
- len -= CILEN_CHAR + vlen; \
- INCPTR(2, p); \
- GETCHAR(cichar, p); \
- if (cichar != class) \
- goto bad; \
- for (i = 0; i < vlen; ++i) { \
- GETCHAR(cichar, p); \
- if (cichar != val[i]) \
- goto bad; \
- } \
- try.neg = 0; \
- }
-
- REJCISHORT(CI_MRU, neg_mru, go->mru);
- REJCILONG(CI_ASYNCMAP, neg_asyncmap, go->asyncmap);
- REJCICHAP(CI_AUTHTYPE, neg_chap, PPP_CHAP, go->chap_mdtype);
- if (!go->neg_chap) {
- REJCISHORT(CI_AUTHTYPE, neg_upap, PPP_PAP);
- }
- REJCILQR(CI_QUALITY, neg_lqr, go->lqr_period);
- REJCICBCP(CI_CALLBACK, neg_cbcp, CBCP_OPT);
- REJCILONG(CI_MAGICNUMBER, neg_magicnumber, go->magicnumber);
- REJCIVOID(CI_PCOMPRESSION, neg_pcompression);
- REJCIVOID(CI_ACCOMPRESSION, neg_accompression);
- REJCISHORT(CI_MRRU, neg_mrru, go->mrru);
- REJCIVOID(CI_SSNHF, neg_ssnhf);
- REJCIENDP(CI_EPDISC, neg_endpoint, go->endpoint.class,
- go->endpoint.value, go->endpoint.length);
-
- /*
- * If there are any remaining CIs, then this packet is bad.
- */
- if (len != 0)
- goto bad;
- /*
- * Now we can update state.
- */
- if (f->state != OPENED)
- *go = try;
- return 1;
-
-bad:
- LCPDEBUG(("lcp_rejci: received bad Reject!"));
- return 0;
-}
-
-
-/*
- * lcp_reqci - Check the peer's requested CIs and send appropriate response.
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately. If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-lcp_reqci(f, inp, lenp, reject_if_disagree)
- fsm *f;
- u_char *inp; /* Requested CIs */
- int *lenp; /* Length of requested CIs */
- int reject_if_disagree;
-{
- lcp_options *go = &lcp_gotoptions[f->unit];
- lcp_options *ho = &lcp_hisoptions[f->unit];
- lcp_options *ao = &lcp_allowoptions[f->unit];
- u_char *cip, *next; /* Pointer to current and next CIs */
- int cilen, citype, cichar; /* Parsed len, type, char value */
- u_short cishort; /* Parsed short value */
- u_int32_t cilong; /* Parse long value */
- int rc = CONFACK; /* Final packet return code */
- int orc; /* Individual option return code */
- u_char *p; /* Pointer to next char to parse */
- u_char *rejp; /* Pointer to next char in reject frame */
- u_char *nakp; /* Pointer to next char in Nak frame */
- int l = *lenp; /* Length left */
-
- /*
- * Reset all his options.
- */
- BZERO(ho, sizeof(*ho));
-
- /*
- * Process all his options.
- */
- next = inp;
- nakp = nak_buffer;
- rejp = inp;
- while (l) {
- orc = CONFACK; /* Assume success */
- cip = p = next; /* Remember begining of CI */
- if (l < 2 || /* Not enough data for CI header or */
- p[1] < 2 || /* CI length too small or */
- p[1] > l) { /* CI length too big? */
- LCPDEBUG(("lcp_reqci: bad CI length!"));
- orc = CONFREJ; /* Reject bad CI */
- cilen = l; /* Reject till end of packet */
- l = 0; /* Don't loop again */
- citype = 0;
- goto endswitch;
- }
- GETCHAR(citype, p); /* Parse CI type */
- GETCHAR(cilen, p); /* Parse CI length */
- l -= cilen; /* Adjust remaining length */
- next += cilen; /* Step to next CI */
-
- switch (citype) { /* Check CI type */
- case CI_MRU:
- if (!ao->neg_mru || /* Allow option? */
- cilen != CILEN_SHORT) { /* Check CI length */
- orc = CONFREJ; /* Reject CI */
- break;
- }
- GETSHORT(cishort, p); /* Parse MRU */
-
- /*
- * He must be able to receive at least our minimum.
- * No need to check a maximum. If he sends a large number,
- * we'll just ignore it.
- */
- if (cishort < MINMRU) {
- orc = CONFNAK; /* Nak CI */
- PUTCHAR(CI_MRU, nakp);
- PUTCHAR(CILEN_SHORT, nakp);
- PUTSHORT(MINMRU, nakp); /* Give him a hint */
- break;
- }
- ho->neg_mru = 1; /* Remember he sent MRU */
- ho->mru = cishort; /* And remember value */
- break;
-
- case CI_ASYNCMAP:
- if (!ao->neg_asyncmap ||
- cilen != CILEN_LONG) {
- orc = CONFREJ;
- break;
- }
- GETLONG(cilong, p);
-
- /*
- * Asyncmap must have set at least the bits
- * which are set in lcp_allowoptions[unit].asyncmap.
- */
- if ((ao->asyncmap & ~cilong) != 0) {
- orc = CONFNAK;
- PUTCHAR(CI_ASYNCMAP, nakp);
- PUTCHAR(CILEN_LONG, nakp);
- PUTLONG(ao->asyncmap | cilong, nakp);
- break;
- }
- ho->neg_asyncmap = 1;
- ho->asyncmap = cilong;
- break;
-
- case CI_AUTHTYPE:
- if (cilen < CILEN_SHORT ||
- !(ao->neg_upap || ao->neg_chap)) {
- /*
- * Reject the option if we're not willing to authenticate.
- */
- orc = CONFREJ;
- break;
- }
- GETSHORT(cishort, p);
-
- /*
- * Authtype must be PAP or CHAP.
- *
- * Note: if both ao->neg_upap and ao->neg_chap are set,
- * and the peer sends a Configure-Request with two
- * authenticate-protocol requests, one for CHAP and one
- * for UPAP, then we will reject the second request.
- * Whether we end up doing CHAP or UPAP depends then on
- * the ordering of the CIs in the peer's Configure-Request.
- */
-
- if (cishort == PPP_PAP) {
- if (ho->neg_chap || /* we've already accepted CHAP */
- cilen != CILEN_SHORT) {
- LCPDEBUG(("lcp_reqci: rcvd AUTHTYPE PAP, rejecting..."));
- orc = CONFREJ;
- break;
- }
- if (!ao->neg_upap) { /* we don't want to do PAP */
- orc = CONFNAK; /* NAK it and suggest CHAP */
- PUTCHAR(CI_AUTHTYPE, nakp);
- PUTCHAR(CILEN_CHAP, nakp);
- PUTSHORT(PPP_CHAP, nakp);
- PUTCHAR(ao->chap_mdtype, nakp);
- /* XXX if we can do CHAP_MICROSOFT as well, we should
- probably put in another option saying so */
- break;
- }
- ho->neg_upap = 1;
- break;
- }
- if (cishort == PPP_CHAP) {
- if (ho->neg_upap || /* we've already accepted PAP */
- cilen != CILEN_CHAP) {
- LCPDEBUG(("lcp_reqci: rcvd AUTHTYPE CHAP, rejecting..."));
- orc = CONFREJ;
- break;
- }
- if (!ao->neg_chap) { /* we don't want to do CHAP */
- orc = CONFNAK; /* NAK it and suggest PAP */
- PUTCHAR(CI_AUTHTYPE, nakp);
- PUTCHAR(CILEN_SHORT, nakp);
- PUTSHORT(PPP_PAP, nakp);
- break;
- }
- GETCHAR(cichar, p); /* get digest type*/
- if (cichar != CHAP_DIGEST_MD5
-#ifdef CHAPMS
- && cichar != CHAP_MICROSOFT
-#endif
- ) {
- orc = CONFNAK;
- PUTCHAR(CI_AUTHTYPE, nakp);
- PUTCHAR(CILEN_CHAP, nakp);
- PUTSHORT(PPP_CHAP, nakp);
- PUTCHAR(ao->chap_mdtype, nakp);
- break;
- }
- ho->chap_mdtype = cichar; /* save md type */
- ho->neg_chap = 1;
- break;
- }
-
- /*
- * We don't recognize the protocol they're asking for.
- * Nak it with something we're willing to do.
- * (At this point we know ao->neg_upap || ao->neg_chap.)
- */
- orc = CONFNAK;
- PUTCHAR(CI_AUTHTYPE, nakp);
- if (ao->neg_chap) {
- PUTCHAR(CILEN_CHAP, nakp);
- PUTSHORT(PPP_CHAP, nakp);
- PUTCHAR(ao->chap_mdtype, nakp);
- } else {
- PUTCHAR(CILEN_SHORT, nakp);
- PUTSHORT(PPP_PAP, nakp);
- }
- break;
-
- case CI_QUALITY:
- if (!ao->neg_lqr ||
- cilen != CILEN_LQR) {
- orc = CONFREJ;
- break;
- }
-
- GETSHORT(cishort, p);
- GETLONG(cilong, p);
-
- /*
- * Check the protocol and the reporting period.
- * XXX When should we Nak this, and what with?
- */
- if (cishort != PPP_LQR) {
- orc = CONFNAK;
- PUTCHAR(CI_QUALITY, nakp);
- PUTCHAR(CILEN_LQR, nakp);
- PUTSHORT(PPP_LQR, nakp);
- PUTLONG(ao->lqr_period, nakp);
- break;
- }
- break;
-
- case CI_MAGICNUMBER:
- if (!(ao->neg_magicnumber || go->neg_magicnumber) ||
- cilen != CILEN_LONG) {
- orc = CONFREJ;
- break;
- }
- GETLONG(cilong, p);
-
- /*
- * He must have a different magic number.
- */
- if (go->neg_magicnumber &&
- cilong == go->magicnumber) {
- cilong = magic(); /* Don't put magic() inside macro! */
- orc = CONFNAK;
- PUTCHAR(CI_MAGICNUMBER, nakp);
- PUTCHAR(CILEN_LONG, nakp);
- PUTLONG(cilong, nakp);
- break;
- }
- ho->neg_magicnumber = 1;
- ho->magicnumber = cilong;
- break;
-
-
- case CI_PCOMPRESSION:
- if (!ao->neg_pcompression ||
- cilen != CILEN_VOID) {
- orc = CONFREJ;
- break;
- }
- ho->neg_pcompression = 1;
- break;
-
- case CI_ACCOMPRESSION:
- if (!ao->neg_accompression ||
- cilen != CILEN_VOID) {
- orc = CONFREJ;
- break;
- }
- ho->neg_accompression = 1;
- break;
-
- case CI_MRRU:
- if (!ao->neg_mrru || !multilink ||
- cilen != CILEN_SHORT) {
- orc = CONFREJ;
- break;
- }
-
- GETSHORT(cishort, p);
- /* possibly should insist on a minimum/maximum MRRU here */
- ho->neg_mrru = 1;
- ho->mrru = cishort;
- break;
-
- case CI_SSNHF:
- if (!ao->neg_ssnhf || !multilink ||
- cilen != CILEN_VOID) {
- orc = CONFREJ;
- break;
- }
- ho->neg_ssnhf = 1;
- break;
-
- case CI_EPDISC:
- if (!ao->neg_endpoint ||
- cilen < CILEN_CHAR ||
- cilen > CILEN_CHAR + MAX_ENDP_LEN) {
- orc = CONFREJ;
- break;
- }
- GETCHAR(cichar, p);
- cilen -= CILEN_CHAR;
- ho->neg_endpoint = 1;
- ho->endpoint.class = cichar;
- ho->endpoint.length = cilen;
- BCOPY(p, ho->endpoint.value, cilen);
- INCPTR(cilen, p);
- break;
-
- default:
- LCPDEBUG(("lcp_reqci: rcvd unknown option %d", citype));
- orc = CONFREJ;
- break;
- }
-
-endswitch:
- if (orc == CONFACK && /* Good CI */
- rc != CONFACK) /* but prior CI wasnt? */
- continue; /* Don't send this one */
-
- if (orc == CONFNAK) { /* Nak this CI? */
- if (reject_if_disagree /* Getting fed up with sending NAKs? */
- && citype != CI_MAGICNUMBER) {
- orc = CONFREJ; /* Get tough if so */
- } else {
- if (rc == CONFREJ) /* Rejecting prior CI? */
- continue; /* Don't send this one */
- rc = CONFNAK;
- }
- }
- if (orc == CONFREJ) { /* Reject this CI */
- rc = CONFREJ;
- if (cip != rejp) /* Need to move rejected CI? */
- BCOPY(cip, rejp, cilen); /* Move it */
- INCPTR(cilen, rejp); /* Update output pointer */
- }
- }
-
- /*
- * If we wanted to send additional NAKs (for unsent CIs), the
- * code would go here. The extra NAKs would go at *nakp.
- * At present there are no cases where we want to ask the
- * peer to negotiate an option.
- */
-
- switch (rc) {
- case CONFACK:
- *lenp = next - inp;
- break;
- case CONFNAK:
- /*
- * Copy the Nak'd options from the nak_buffer to the caller's buffer.
- */
- *lenp = nakp - nak_buffer;
- BCOPY(nak_buffer, inp, *lenp);
- break;
- case CONFREJ:
- *lenp = rejp - inp;
- break;
- }
-
- LCPDEBUG(("lcp_reqci: returning CONF%s.", CODENAME(rc)));
- return (rc); /* Return final code */
-}
-
-
-/*
- * lcp_up - LCP has come UP.
- */
-static void
-lcp_up(f)
- fsm *f;
-{
- lcp_options *wo = &lcp_wantoptions[f->unit];
- lcp_options *ho = &lcp_hisoptions[f->unit];
- lcp_options *go = &lcp_gotoptions[f->unit];
- lcp_options *ao = &lcp_allowoptions[f->unit];
- int mtu;
-
- if (!go->neg_magicnumber)
- go->magicnumber = 0;
- if (!ho->neg_magicnumber)
- ho->magicnumber = 0;
-
- /*
- * Set our MTU to the smaller of the MTU we wanted and
- * the MRU our peer wanted. If we negotiated an MRU,
- * set our MRU to the larger of value we wanted and
- * the value we got in the negotiation.
- * Note on the MTU: the link MTU can be the MRU the peer wanted,
- * the interface MTU is set to the lower of that and the
- * MTU we want to use.
- */
- mtu = ho->neg_mru? ho->mru: PPP_MRU;
-#ifdef HAVE_MULTILINK
- if (!(multilink && go->neg_mrru && ho->neg_mrru))
-#endif /* HAVE_MULTILINK */
- netif_set_mtu(f->unit, MIN(mtu, ao->mru));
- ppp_send_config(f->unit, mtu,
- (ho->neg_asyncmap? ho->asyncmap: 0xffffffff),
- ho->neg_pcompression, ho->neg_accompression);
- ppp_recv_config(f->unit, (go->neg_mru? MAX(wo->mru, go->mru): PPP_MRU),
- (lax_recv? 0: go->neg_asyncmap? go->asyncmap: 0xffffffff),
- go->neg_pcompression, go->neg_accompression);
-
- if (ho->neg_mru)
- peer_mru[f->unit] = ho->mru;
-
- lcp_echo_lowerup(f->unit); /* Enable echo messages */
-
- link_established(f->unit);
-}
-
-
-/*
- * lcp_down - LCP has gone DOWN.
- *
- * Alert other protocols.
- */
-static void
-lcp_down(f)
- fsm *f;
-{
- lcp_options *go = &lcp_gotoptions[f->unit];
-
- lcp_echo_lowerdown(f->unit);
-
- link_down(f->unit);
-
- ppp_send_config(f->unit, PPP_MRU, 0xffffffff, 0, 0);
- ppp_recv_config(f->unit, PPP_MRU,
- (go->neg_asyncmap? go->asyncmap: 0xffffffff),
- go->neg_pcompression, go->neg_accompression);
- peer_mru[f->unit] = PPP_MRU;
-}
-
-
-/*
- * lcp_starting - LCP needs the lower layer up.
- */
-static void
-lcp_starting(f)
- fsm *f;
-{
- link_required(f->unit);
-}
-
-
-/*
- * lcp_finished - LCP has finished with the lower layer.
- */
-static void
-lcp_finished(f)
- fsm *f;
-{
- link_terminated(f->unit);
-}
-
-
-/*
- * lcp_printpkt - print the contents of an LCP packet.
- */
-static char *lcp_codenames[] = {
- "ConfReq", "ConfAck", "ConfNak", "ConfRej",
- "TermReq", "TermAck", "CodeRej", "ProtRej",
- "EchoReq", "EchoRep", "DiscReq"
-};
-
-static int
-lcp_printpkt(p, plen, printer, arg)
- u_char *p;
- int plen;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int code, id, len, olen, i;
- u_char *pstart, *optend;
- u_short cishort;
- u_int32_t cilong;
-
- if (plen < HEADERLEN)
- return 0;
- pstart = p;
- GETCHAR(code, p);
- GETCHAR(id, p);
- GETSHORT(len, p);
- if (len < HEADERLEN || len > plen)
- return 0;
-
- if (code >= 1 && code <= sizeof(lcp_codenames) / sizeof(char *))
- printer(arg, " %s", lcp_codenames[code-1]);
- else
- printer(arg, " code=0x%x", code);
- printer(arg, " id=0x%x", id);
- len -= HEADERLEN;
- switch (code) {
- case CONFREQ:
- case CONFACK:
- case CONFNAK:
- case CONFREJ:
- /* print option list */
- while (len >= 2) {
- GETCHAR(code, p);
- GETCHAR(olen, p);
- p -= 2;
- if (olen < 2 || olen > len) {
- break;
- }
- printer(arg, " <");
- len -= olen;
- optend = p + olen;
- switch (code) {
- case CI_MRU:
- if (olen == CILEN_SHORT) {
- p += 2;
- GETSHORT(cishort, p);
- printer(arg, "mru %d", cishort);
- }
- break;
- case CI_ASYNCMAP:
- if (olen == CILEN_LONG) {
- p += 2;
- GETLONG(cilong, p);
- printer(arg, "asyncmap 0x%x", cilong);
- }
- break;
- case CI_AUTHTYPE:
- if (olen >= CILEN_SHORT) {
- p += 2;
- printer(arg, "auth ");
- GETSHORT(cishort, p);
- switch (cishort) {
- case PPP_PAP:
- printer(arg, "pap");
- break;
- case PPP_CHAP:
- printer(arg, "chap");
- if (p < optend) {
- switch (*p) {
- case CHAP_DIGEST_MD5:
- printer(arg, " MD5");
- ++p;
- break;
-#ifdef CHAPMS
- case CHAP_MICROSOFT:
- printer(arg, " m$oft");
- ++p;
- break;
-#endif
- }
- }
- break;
- default:
- printer(arg, "0x%x", cishort);
- }
- }
- break;
- case CI_QUALITY:
- if (olen >= CILEN_SHORT) {
- p += 2;
- printer(arg, "quality ");
- GETSHORT(cishort, p);
- switch (cishort) {
- case PPP_LQR:
- printer(arg, "lqr");
- break;
- default:
- printer(arg, "0x%x", cishort);
- }
- }
- break;
- case CI_CALLBACK:
- if (olen >= CILEN_CHAR) {
- p += 2;
- printer(arg, "callback ");
- GETCHAR(cishort, p);
- switch (cishort) {
- case CBCP_OPT:
- printer(arg, "CBCP");
- break;
- default:
- printer(arg, "0x%x", cishort);
- }
- }
- break;
- case CI_MAGICNUMBER:
- if (olen == CILEN_LONG) {
- p += 2;
- GETLONG(cilong, p);
- printer(arg, "magic 0x%x", cilong);
- }
- break;
- case CI_PCOMPRESSION:
- if (olen == CILEN_VOID) {
- p += 2;
- printer(arg, "pcomp");
- }
- break;
- case CI_ACCOMPRESSION:
- if (olen == CILEN_VOID) {
- p += 2;
- printer(arg, "accomp");
- }
- break;
- case CI_MRRU:
- if (olen == CILEN_SHORT) {
- p += 2;
- GETSHORT(cishort, p);
- printer(arg, "mrru %d", cishort);
- }
- break;
- case CI_SSNHF:
- if (olen == CILEN_VOID) {
- p += 2;
- printer(arg, "ssnhf");
- }
- break;
- case CI_EPDISC:
-#ifdef HAVE_MULTILINK
- if (olen >= CILEN_CHAR) {
- struct epdisc epd;
- p += 2;
- GETCHAR(epd.class, p);
- epd.length = olen - CILEN_CHAR;
- if (epd.length > MAX_ENDP_LEN)
- epd.length = MAX_ENDP_LEN;
- if (epd.length > 0) {
- BCOPY(p, epd.value, epd.length);
- p += epd.length;
- }
- printer(arg, "endpoint [%s]", epdisc_to_str(&epd));
- }
-#else
- printer(arg, "endpoint");
-#endif
- break;
- }
- while (p < optend) {
- GETCHAR(code, p);
- printer(arg, " %.2x", code);
- }
- printer(arg, ">");
- }
- break;
-
- case TERMACK:
- case TERMREQ:
- if (len > 0 && *p >= ' ' && *p < 0x7f) {
- printer(arg, " ");
- print_string((char *)p, len, printer, arg);
- p += len;
- len = 0;
- }
- break;
-
- case ECHOREQ:
- case ECHOREP:
- case DISCREQ:
- if (len >= 4) {
- GETLONG(cilong, p);
- printer(arg, " magic=0x%x", cilong);
- p += 4;
- len -= 4;
- }
- break;
- }
-
- /* print the rest of the bytes in the packet */
- for (i = 0; i < len && i < 32; ++i) {
- GETCHAR(code, p);
- printer(arg, " %.2x", code);
- }
- if (i < len) {
- printer(arg, " ...");
- p += len - i;
- }
-
- return p - pstart;
-}
-
-/*
- * Time to shut down the link because there is nothing out there.
- */
-
-static
-void LcpLinkFailure (f)
- fsm *f;
-{
- if (f->state == OPENED) {
- info("No response to %d echo-requests", lcp_echos_pending);
- notice("Serial link appears to be disconnected.");
- lcp_close(f->unit, "Peer not responding");
- status = EXIT_PEER_DEAD;
- }
-}
-
-/*
- * Timer expired for the LCP echo requests from this process.
- */
-
-static void
-LcpEchoCheck (f)
- fsm *f;
-{
- LcpSendEchoRequest (f);
- if (f->state != OPENED)
- return;
-
- /*
- * Start the timer for the next interval.
- */
- if (lcp_echo_timer_running)
- warn("assertion lcp_echo_timer_running==0 failed");
- TIMEOUT (LcpEchoTimeout, f, lcp_echo_interval);
- lcp_echo_timer_running = 1;
-}
-
-/*
- * LcpEchoTimeout - Timer expired on the LCP echo
- */
-
-static void
-LcpEchoTimeout (arg)
- void *arg;
-{
- if (lcp_echo_timer_running != 0) {
- lcp_echo_timer_running = 0;
- LcpEchoCheck ((fsm *) arg);
- }
-}
-
-/*
- * LcpEchoReply - LCP has received a reply to the echo
- */
-
-static void
-lcp_received_echo_reply (f, id, inp, len)
- fsm *f;
- int id;
- u_char *inp;
- int len;
-{
- u_int32_t magic;
-
- /* Check the magic number - don't count replies from ourselves. */
- if (len < 4) {
- dbglog("lcp: received short Echo-Reply, length %d", len);
- return;
- }
- GETLONG(magic, inp);
- if (lcp_gotoptions[f->unit].neg_magicnumber
- && magic == lcp_gotoptions[f->unit].magicnumber) {
- warn("appear to have received our own echo-reply!");
- return;
- }
-
- /* Reset the number of outstanding echo frames */
- lcp_echos_pending = 0;
-}
-
-/*
- * LcpSendEchoRequest - Send an echo request frame to the peer
- */
-
-static void
-LcpSendEchoRequest (f)
- fsm *f;
-{
- u_int32_t lcp_magic;
- u_char pkt[4], *pktp;
-
- /*
- * Detect the failure of the peer at this point.
- */
- if (lcp_echo_fails != 0) {
- if (lcp_echos_pending >= lcp_echo_fails) {
- LcpLinkFailure(f);
- lcp_echos_pending = 0;
- }
- }
-
- /*
- * Make and send the echo request frame.
- */
- if (f->state == OPENED) {
- lcp_magic = lcp_gotoptions[f->unit].magicnumber;
- pktp = pkt;
- PUTLONG(lcp_magic, pktp);
- fsm_sdata(f, ECHOREQ, lcp_echo_number++ & 0xFF, pkt, pktp - pkt);
- ++lcp_echos_pending;
- }
-}
-
-/*
- * lcp_echo_lowerup - Start the timer for the LCP frame
- */
-
-static void
-lcp_echo_lowerup (unit)
- int unit;
-{
- fsm *f = &lcp_fsm[unit];
-
- /* Clear the parameters for generating echo frames */
- lcp_echos_pending = 0;
- lcp_echo_number = 0;
- lcp_echo_timer_running = 0;
-
- /* If a timeout interval is specified then start the timer */
- if (lcp_echo_interval != 0)
- LcpEchoCheck (f);
-}
-
-/*
- * lcp_echo_lowerdown - Stop the timer for the LCP frame
- */
-
-static void
-lcp_echo_lowerdown (unit)
- int unit;
-{
- fsm *f = &lcp_fsm[unit];
-
- if (lcp_echo_timer_running != 0) {
- UNTIMEOUT (LcpEchoTimeout, f);
- lcp_echo_timer_running = 0;
- }
-}
diff --git a/mdk-stage1/ppp/pppd/lcp.h b/mdk-stage1/ppp/pppd/lcp.h
deleted file mode 100644
index b87a9295e..000000000
--- a/mdk-stage1/ppp/pppd/lcp.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * lcp.h - Link Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define CI_MRU 1 /* Maximum Receive Unit */
-#define CI_ASYNCMAP 2 /* Async Control Character Map */
-#define CI_AUTHTYPE 3 /* Authentication Type */
-#define CI_QUALITY 4 /* Quality Protocol */
-#define CI_MAGICNUMBER 5 /* Magic Number */
-#define CI_PCOMPRESSION 7 /* Protocol Field Compression */
-#define CI_ACCOMPRESSION 8 /* Address/Control Field Compression */
-#define CI_CALLBACK 13 /* callback */
-#define CI_MRRU 17 /* max reconstructed receive unit; multilink */
-#define CI_SSNHF 18 /* short sequence numbers for multilink */
-#define CI_EPDISC 19 /* endpoint discriminator */
-
-/*
- * LCP-specific packet types.
- */
-#define PROTREJ 8 /* Protocol Reject */
-#define ECHOREQ 9 /* Echo Request */
-#define ECHOREP 10 /* Echo Reply */
-#define DISCREQ 11 /* Discard Request */
-#define CBCP_OPT 6 /* Use callback control protocol */
-
-/*
- * The state of options is described by an lcp_options structure.
- */
-typedef struct lcp_options {
- bool passive; /* Don't die if we don't get a response */
- bool silent; /* Wait for the other end to start first */
- bool restart; /* Restart vs. exit after close */
- bool neg_mru; /* Negotiate the MRU? */
- bool neg_asyncmap; /* Negotiate the async map? */
- bool neg_upap; /* Ask for UPAP authentication? */
- bool neg_chap; /* Ask for CHAP authentication? */
- bool neg_magicnumber; /* Ask for magic number? */
- bool neg_pcompression; /* HDLC Protocol Field Compression? */
- bool neg_accompression; /* HDLC Address/Control Field Compression? */
- bool neg_lqr; /* Negotiate use of Link Quality Reports */
- bool neg_cbcp; /* Negotiate use of CBCP */
- bool neg_mrru; /* negotiate multilink MRRU */
- bool neg_ssnhf; /* negotiate short sequence numbers */
- bool neg_endpoint; /* negotiate endpoint discriminator */
- int mru; /* Value of MRU */
- int mrru; /* Value of MRRU, and multilink enable */
- u_char chap_mdtype; /* which MD type (hashing algorithm) */
- u_int32_t asyncmap; /* Value of async map */
- u_int32_t magicnumber;
- int numloops; /* Number of loops during magic number neg. */
- u_int32_t lqr_period; /* Reporting period for LQR 1/100ths second */
- struct epdisc endpoint; /* endpoint discriminator */
-} lcp_options;
-
-extern fsm lcp_fsm[];
-extern lcp_options lcp_wantoptions[];
-extern lcp_options lcp_gotoptions[];
-extern lcp_options lcp_allowoptions[];
-extern lcp_options lcp_hisoptions[];
-
-#define DEFMRU 1500 /* Try for this */
-#define MINMRU 128 /* No MRUs below this */
-#define MAXMRU 16384 /* Normally limit MRU to this */
-
-void lcp_open __P((int));
-void lcp_close __P((int, char *));
-void lcp_lowerup __P((int));
-void lcp_lowerdown __P((int));
-void lcp_sprotrej __P((int, u_char *, int)); /* send protocol reject */
-
-extern struct protent lcp_protent;
-
-/* Default number of times we receive our magic number from the peer
- before deciding the link is looped-back. */
-#define DEFLOOPBACKFAIL 10
diff --git a/mdk-stage1/ppp/pppd/magic.c b/mdk-stage1/ppp/pppd/magic.c
deleted file mode 100644
index 1682dee03..000000000
--- a/mdk-stage1/ppp/pppd/magic.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * magic.c - PPP Magic Number routines.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-#include "pppd.h"
-#include "magic.h"
-
-static const char rcsid[] = RCSID;
-
-extern long mrand48 __P((void));
-extern void srand48 __P((long));
-
-/*
- * magic_init - Initialize the magic number generator.
- *
- * Attempts to compute a random number seed which will not repeat.
- * The current method uses the current hostid, current process ID
- * and current time, currently.
- */
-void
-magic_init()
-{
- long seed;
- struct timeval t;
-
- gettimeofday(&t, NULL);
- seed = get_host_seed() ^ t.tv_sec ^ t.tv_usec ^ getpid();
- srand48(seed);
-}
-
-/*
- * magic - Returns the next magic number.
- */
-u_int32_t
-magic()
-{
- return (u_int32_t) mrand48();
-}
-
-#ifdef NO_DRAND48
-/*
- * Substitute procedures for those systems which don't have
- * drand48 et al.
- */
-
-double
-drand48()
-{
- return (double)random() / (double)0x7fffffffL; /* 2**31-1 */
-}
-
-long
-mrand48()
-{
- return random();
-}
-
-void
-srand48(seedval)
-long seedval;
-{
- srandom((int)seedval);
-}
-
-#endif
diff --git a/mdk-stage1/ppp/pppd/magic.h b/mdk-stage1/ppp/pppd/magic.h
deleted file mode 100644
index 1344626a3..000000000
--- a/mdk-stage1/ppp/pppd/magic.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * magic.h - PPP Magic Number definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-void magic_init __P((void)); /* Initialize the magic number generator */
-u_int32_t magic __P((void)); /* Returns the next magic number */
diff --git a/mdk-stage1/ppp/pppd/main.c b/mdk-stage1/ppp/pppd/main.c
deleted file mode 100644
index c074938cd..000000000
--- a/mdk-stage1/ppp/pppd/main.c
+++ /dev/null
@@ -1,1846 +0,0 @@
-/*
- * main.c - Point-to-Point Protocol main module
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <netdb.h>
-#include <utmp.h>
-#include <pwd.h>
-#include <setjmp.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "magic.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "ipcp.h"
-#ifdef INET6
-#include "ipv6cp.h"
-#endif
-#include "upap.h"
-#include "chap.h"
-#include "ccp.h"
-#include "pathnames.h"
-#include "tdb.h"
-
-#ifdef CBCP_SUPPORT
-#include "cbcp.h"
-#endif
-
-#ifdef IPX_CHANGE
-#include "ipxcp.h"
-#endif /* IPX_CHANGE */
-#ifdef AT_CHANGE
-#include "atcp.h"
-#endif
-
-static const char rcsid[] = RCSID;
-
-/* interface vars */
-char ifname[32]; /* Interface name */
-int ifunit; /* Interface unit number */
-
-struct channel *the_channel;
-
-char *progname; /* Name of this program */
-char hostname[MAXNAMELEN]; /* Our hostname */
-static char pidfilename[MAXPATHLEN]; /* name of pid file */
-static char linkpidfile[MAXPATHLEN]; /* name of linkname pid file */
-char ppp_devnam[MAXPATHLEN]; /* name of PPP tty (maybe ttypx) */
-uid_t uid; /* Our real user-id */
-struct notifier *pidchange = NULL;
-struct notifier *phasechange = NULL;
-struct notifier *exitnotify = NULL;
-struct notifier *sigreceived = NULL;
-
-int hungup; /* terminal has been hung up */
-int privileged; /* we're running as real uid root */
-int need_holdoff; /* need holdoff period before restarting */
-int detached; /* have detached from terminal */
-volatile int status; /* exit status for pppd */
-int unsuccess; /* # unsuccessful connection attempts */
-int do_callback; /* != 0 if we should do callback next */
-int doing_callback; /* != 0 if we are doing callback */
-TDB_CONTEXT *pppdb; /* database for storing status etc. */
-char db_key[32];
-
-int (*holdoff_hook) __P((void)) = NULL;
-int (*new_phase_hook) __P((int)) = NULL;
-
-static int conn_running; /* we have a [dis]connector running */
-static int devfd; /* fd of underlying device */
-static int fd_ppp = -1; /* fd for talking PPP */
-static int fd_loop; /* fd for getting demand-dial packets */
-
-int phase; /* where the link is at */
-int kill_link;
-int open_ccp_flag;
-int listen_time;
-int got_sigusr2;
-int got_sigterm;
-int got_sighup;
-
-static int waiting;
-static sigjmp_buf sigjmp;
-
-char **script_env; /* Env. variable values for scripts */
-int s_env_nalloc; /* # words avail at script_env */
-
-u_char outpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for outgoing packet */
-u_char inpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for incoming packet */
-
-static int n_children; /* # child processes still running */
-static int got_sigchld; /* set if we have received a SIGCHLD */
-
-int privopen; /* don't lock, open device as root */
-
-char *no_ppp_msg = "Sorry - this system lacks PPP kernel support\n";
-
-GIDSET_TYPE groups[NGROUPS_MAX];/* groups the user is in */
-int ngroups; /* How many groups valid in groups */
-
-static struct timeval start_time; /* Time when link was started. */
-
-struct pppd_stats link_stats;
-int link_connect_time;
-int link_stats_valid;
-
-/*
- * We maintain a list of child process pids and
- * functions to call when they exit.
- */
-struct subprocess {
- pid_t pid;
- char *prog;
- void (*done) __P((void *));
- void *arg;
- struct subprocess *next;
-};
-
-static struct subprocess *children;
-
-/* Prototypes for procedures local to this file. */
-
-static void setup_signals __P((void));
-static void create_pidfile __P((void));
-static void create_linkpidfile __P((void));
-static void cleanup __P((void));
-static void get_input __P((void));
-static void calltimeout __P((void));
-static struct timeval *timeleft __P((struct timeval *));
-static void kill_my_pg __P((int));
-static void hup __P((int));
-static void term __P((int));
-static void chld __P((int));
-static void toggle_debug __P((int));
-static void open_ccp __P((int));
-static void bad_signal __P((int));
-static void holdoff_end __P((void *));
-static int reap_kids __P((int waitfor));
-static void update_db_entry __P((void));
-static void add_db_key __P((const char *));
-static void delete_db_key __P((const char *));
-static void cleanup_db __P((void));
-static void handle_events __P((void));
-
-extern char *ttyname __P((int));
-extern char *getlogin __P((void));
-int main __P((int, char *[]));
-
-#ifdef ultrix
-#undef O_NONBLOCK
-#define O_NONBLOCK O_NDELAY
-#endif
-
-#ifdef ULTRIX
-#define setlogmask(x)
-#endif
-
-/*
- * PPP Data Link Layer "protocol" table.
- * One entry per supported protocol.
- * The last entry must be NULL.
- */
-struct protent *protocols[] = {
- &lcp_protent,
- &pap_protent,
- &chap_protent,
-#ifdef CBCP_SUPPORT
- &cbcp_protent,
-#endif
- &ipcp_protent,
-#ifdef INET6
- &ipv6cp_protent,
-#endif
- &ccp_protent,
-#ifdef IPX_CHANGE
- &ipxcp_protent,
-#endif
-#ifdef AT_CHANGE
- &atcp_protent,
-#endif
- NULL
-};
-
-/*
- * If PPP_DRV_NAME is not defined, use the default "ppp" as the device name.
- */
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME "ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
-int
-main(argc, argv)
- int argc;
- char *argv[];
-{
- int i, t;
- char *p;
- struct passwd *pw;
- struct protent *protp;
- char numbuf[16];
-
- new_phase(PHASE_INITIALIZE);
-
- /*
- * Ensure that fds 0, 1, 2 are open, to /dev/null if nowhere else.
- * This way we can close 0, 1, 2 in detach() without clobbering
- * a fd that we are using.
- */
- if ((i = open("/dev/null", O_RDWR)) >= 0) {
- while (0 <= i && i <= 2)
- i = dup(i);
- if (i >= 0)
- close(i);
- }
-
- script_env = NULL;
-
- /* Initialize syslog facilities */
- reopen_log();
-
- if (gethostname(hostname, MAXNAMELEN) < 0 ) {
- option_error("Couldn't get hostname: %m");
- exit(1);
- }
- hostname[MAXNAMELEN-1] = 0;
-
- /* make sure we don't create world or group writable files. */
- umask(umask(0777) | 022);
-
- uid = getuid();
- privileged = uid == 0;
- slprintf(numbuf, sizeof(numbuf), "%d", uid);
- script_setenv("ORIG_UID", numbuf, 0);
-
- ngroups = getgroups(NGROUPS_MAX, groups);
-
- /*
- * Initialize magic number generator now so that protocols may
- * use magic numbers in initialization.
- */
- magic_init();
-
- /*
- * Initialize each protocol.
- */
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- (*protp->init)(0);
-
- /*
- * Initialize the default channel.
- */
- tty_init();
-
- progname = *argv;
-
- /*
- * Parse, in order, the system options file, the user's options file,
- * and the command line arguments.
- */
- if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1)
- || !options_from_user()
- || !parse_args(argc-1, argv+1))
- exit(EXIT_OPTION_ERROR);
- devnam_fixed = 1; /* can no longer change device name */
-
- /*
- * Work out the device name, if it hasn't already been specified,
- * and parse the tty's options file.
- */
- if (the_channel->process_extra_options)
- (*the_channel->process_extra_options)();
-
- if (debug)
- setlogmask(LOG_UPTO(LOG_DEBUG));
-
- /*
- * Check that we are running as root.
- */
- if (geteuid() != 0) {
- option_error("must be root to run %s, since it is not setuid-root",
- argv[0]);
- exit(EXIT_NOT_ROOT);
- }
-
- if (!ppp_available()) {
- option_error("%s", no_ppp_msg);
- exit(EXIT_NO_KERNEL_SUPPORT);
- }
-
- /*
- * Check that the options given are valid and consistent.
- */
- check_options();
- if (!sys_check_options())
- exit(EXIT_OPTION_ERROR);
- auth_check_options();
-#ifdef HAVE_MULTILINK
- mp_check_options();
-#endif
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (protp->check_options != NULL)
- (*protp->check_options)();
- if (the_channel->check_options)
- (*the_channel->check_options)();
-
-
- if (dump_options || dryrun) {
- init_pr_log(NULL, LOG_INFO);
- print_options(pr_log, NULL);
- end_pr_log();
- if (dryrun)
- die(0);
- }
-
- /*
- * Initialize system-dependent stuff.
- */
- sys_init();
-
- pppdb = tdb_open(_PATH_PPPDB, 0, 0, O_RDWR|O_CREAT, 0644);
- if (pppdb != NULL) {
- slprintf(db_key, sizeof(db_key), "pppd%d", getpid());
- update_db_entry();
- } else {
- warn("Warning: couldn't open ppp database %s", _PATH_PPPDB);
- if (multilink) {
- warn("Warning: disabling multilink");
- multilink = 0;
- }
- }
-
- /*
- * Detach ourselves from the terminal, if required,
- * and identify who is running us.
- */
- if (!nodetach && !updetach)
- detach();
- p = getlogin();
- if (p == NULL) {
- pw = getpwuid(uid);
- if (pw != NULL && pw->pw_name != NULL)
- p = pw->pw_name;
- else
- p = "(unknown)";
- }
- syslog(LOG_NOTICE, "pppd %s started by %s, uid %d", VERSION, p, uid);
- script_setenv("PPPLOGNAME", p, 0);
-
- if (devnam[0])
- script_setenv("DEVICE", devnam, 1);
- slprintf(numbuf, sizeof(numbuf), "%d", getpid());
- script_setenv("PPPD_PID", numbuf, 1);
-
- setup_signals();
-
- waiting = 0;
-
- create_linkpidfile();
-
- /*
- * If we're doing dial-on-demand, set up the interface now.
- */
- if (demand) {
- /*
- * Open the loopback channel and set it up to be the ppp interface.
- */
- tdb_writelock(pppdb);
- fd_loop = open_ppp_loopback();
- set_ifunit(1);
- tdb_writeunlock(pppdb);
-
- /*
- * Configure the interface and mark it up, etc.
- */
- demand_conf();
- }
-
- do_callback = 0;
- for (;;) {
-
- listen_time = 0;
- need_holdoff = 1;
- devfd = -1;
- status = EXIT_OK;
- ++unsuccess;
- doing_callback = do_callback;
- do_callback = 0;
-
- if (demand && !doing_callback) {
- /*
- * Don't do anything until we see some activity.
- */
- new_phase(PHASE_DORMANT);
- demand_unblock();
- add_fd(fd_loop);
- for (;;) {
- handle_events();
- if (kill_link && !persist)
- break;
- if (get_loop_output())
- break;
- }
- remove_fd(fd_loop);
- if (kill_link && !persist)
- break;
-
- /*
- * Now we want to bring up the link.
- */
- demand_block();
- info("Starting link");
- }
-
- new_phase(PHASE_SERIALCONN);
-
- devfd = the_channel->connect();
- if (devfd < 0)
- goto fail;
-
- /* set up the serial device as a ppp interface */
- tdb_writelock(pppdb);
- fd_ppp = the_channel->establish_ppp(devfd);
- if (fd_ppp < 0) {
- tdb_writeunlock(pppdb);
- status = EXIT_FATAL_ERROR;
- goto disconnect;
- }
-
- if (!demand && ifunit >= 0)
- set_ifunit(1);
- tdb_writeunlock(pppdb);
-
- /*
- * Start opening the connection and wait for
- * incoming events (reply, timeout, etc.).
- */
- notice("Connect: %s <--> %s", ifname, ppp_devnam);
- gettimeofday(&start_time, NULL);
- link_stats_valid = 0;
- script_unsetenv("CONNECT_TIME");
- script_unsetenv("BYTES_SENT");
- script_unsetenv("BYTES_RCVD");
- lcp_lowerup(0);
-
- add_fd(fd_ppp);
- lcp_open(0); /* Start protocol */
- status = EXIT_NEGOTIATION_FAILED;
- new_phase(PHASE_ESTABLISH);
- while (phase != PHASE_DEAD) {
- handle_events();
- get_input();
- if (kill_link)
- lcp_close(0, "User request");
- if (open_ccp_flag) {
- if (phase == PHASE_NETWORK || phase == PHASE_RUNNING) {
- ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
- (*ccp_protent.open)(0);
- }
- }
- }
-
- /*
- * Print connect time and statistics.
- */
- if (link_stats_valid) {
- int t = (link_connect_time + 5) / 6; /* 1/10ths of minutes */
- info("Connect time %d.%d minutes.", t/10, t%10);
- info("Sent %u bytes, received %u bytes.",
- link_stats.bytes_out, link_stats.bytes_in);
- }
-
- /*
- * Delete pid file before disestablishing ppp. Otherwise it
- * can happen that another pppd gets the same unit and then
- * we delete its pid file.
- */
- if (!demand) {
- if (pidfilename[0] != 0
- && unlink(pidfilename) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- }
-
- /*
- * If we may want to bring the link up again, transfer
- * the ppp unit back to the loopback. Set the
- * real serial device back to its normal mode of operation.
- */
- remove_fd(fd_ppp);
- clean_check();
- the_channel->disestablish_ppp(devfd);
- fd_ppp = -1;
- if (!hungup)
- lcp_lowerdown(0);
- if (!demand)
- script_unsetenv("IFNAME");
-
- /*
- * Run disconnector script, if requested.
- * XXX we may not be able to do this if the line has hung up!
- */
- disconnect:
- new_phase(PHASE_DISCONNECT);
- the_channel->disconnect();
-
- fail:
- if (the_channel->cleanup)
- (*the_channel->cleanup)();
-
- if (!demand) {
- if (pidfilename[0] != 0
- && unlink(pidfilename) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- }
-
- if (!persist || (maxfail > 0 && unsuccess >= maxfail))
- break;
-
- if (demand)
- demand_discard();
- t = need_holdoff? holdoff: 0;
- if (holdoff_hook)
- t = (*holdoff_hook)();
- if (t > 0) {
- new_phase(PHASE_HOLDOFF);
- TIMEOUT(holdoff_end, NULL, t);
- do {
- handle_events();
- if (kill_link)
- new_phase(PHASE_DORMANT); /* allow signal to end holdoff */
- } while (phase == PHASE_HOLDOFF);
- if (!persist)
- break;
- }
- }
-
- /* Wait for scripts to finish */
- /* XXX should have a timeout here */
- while (n_children > 0) {
- if (debug) {
- struct subprocess *chp;
- dbglog("Waiting for %d child processes...", n_children);
- for (chp = children; chp != NULL; chp = chp->next)
- dbglog(" script %s, pid %d", chp->prog, chp->pid);
- }
- if (reap_kids(1) < 0)
- break;
- }
-
- die(status);
- return 0;
-}
-
-/*
- * handle_events - wait for something to happen and respond to it.
- */
-static void
-handle_events()
-{
- struct timeval timo;
- sigset_t mask;
-
- kill_link = open_ccp_flag = 0;
- if (sigsetjmp(sigjmp, 1) == 0) {
- sigprocmask(SIG_BLOCK, &mask, NULL);
- if (got_sighup || got_sigterm || got_sigusr2 || got_sigchld) {
- sigprocmask(SIG_UNBLOCK, &mask, NULL);
- } else {
- waiting = 1;
- sigprocmask(SIG_UNBLOCK, &mask, NULL);
- wait_input(timeleft(&timo));
- }
- }
- waiting = 0;
- calltimeout();
- if (got_sighup) {
- kill_link = 1;
- got_sighup = 0;
- if (status != EXIT_HANGUP)
- status = EXIT_USER_REQUEST;
- }
- if (got_sigterm) {
- kill_link = 1;
- persist = 0;
- status = EXIT_USER_REQUEST;
- got_sigterm = 0;
- }
- if (got_sigchld) {
- reap_kids(0); /* Don't leave dead kids lying around */
- got_sigchld = 0;
- }
- if (got_sigusr2) {
- open_ccp_flag = 1;
- got_sigusr2 = 0;
- }
-}
-
-/*
- * setup_signals - initialize signal handling.
- */
-static void
-setup_signals()
-{
- struct sigaction sa;
- sigset_t mask;
-
- /*
- * Compute mask of all interesting signals and install signal handlers
- * for each. Only one signal handler may be active at a time. Therefore,
- * all other signals should be masked when any handler is executing.
- */
- sigemptyset(&mask);
- sigaddset(&mask, SIGHUP);
- sigaddset(&mask, SIGINT);
- sigaddset(&mask, SIGTERM);
- sigaddset(&mask, SIGCHLD);
- sigaddset(&mask, SIGUSR2);
-
-#define SIGNAL(s, handler) do { \
- sa.sa_handler = handler; \
- if (sigaction(s, &sa, NULL) < 0) \
- fatal("Couldn't establish signal handler (%d): %m", s); \
- } while (0)
-
- sa.sa_mask = mask;
- sa.sa_flags = 0;
- SIGNAL(SIGHUP, hup); /* Hangup */
- SIGNAL(SIGINT, term); /* Interrupt */
- SIGNAL(SIGTERM, term); /* Terminate */
- SIGNAL(SIGCHLD, chld);
-
- SIGNAL(SIGUSR1, toggle_debug); /* Toggle debug flag */
- SIGNAL(SIGUSR2, open_ccp); /* Reopen CCP */
-
- /*
- * Install a handler for other signals which would otherwise
- * cause pppd to exit without cleaning up.
- */
- SIGNAL(SIGABRT, bad_signal);
- SIGNAL(SIGALRM, bad_signal);
- SIGNAL(SIGFPE, bad_signal);
- SIGNAL(SIGILL, bad_signal);
- SIGNAL(SIGPIPE, bad_signal);
- SIGNAL(SIGQUIT, bad_signal);
- SIGNAL(SIGSEGV, bad_signal);
-#ifdef SIGBUS
- SIGNAL(SIGBUS, bad_signal);
-#endif
-#ifdef SIGEMT
- SIGNAL(SIGEMT, bad_signal);
-#endif
-#ifdef SIGPOLL
- SIGNAL(SIGPOLL, bad_signal);
-#endif
-#ifdef SIGPROF
- SIGNAL(SIGPROF, bad_signal);
-#endif
-#ifdef SIGSYS
- SIGNAL(SIGSYS, bad_signal);
-#endif
-#ifdef SIGTRAP
- SIGNAL(SIGTRAP, bad_signal);
-#endif
-#ifdef SIGVTALRM
- SIGNAL(SIGVTALRM, bad_signal);
-#endif
-#ifdef SIGXCPU
- SIGNAL(SIGXCPU, bad_signal);
-#endif
-#ifdef SIGXFSZ
- SIGNAL(SIGXFSZ, bad_signal);
-#endif
-
- /*
- * Apparently we can get a SIGPIPE when we call syslog, if
- * syslogd has died and been restarted. Ignoring it seems
- * be sufficient.
- */
- signal(SIGPIPE, SIG_IGN);
-}
-
-/*
- * set_ifunit - do things we need to do once we know which ppp
- * unit we are using.
- */
-void
-set_ifunit(iskey)
- int iskey;
-{
- info("Using interface %s%d", PPP_DRV_NAME, ifunit);
- slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit);
- script_setenv("IFNAME", ifname, iskey);
- if (iskey) {
- create_pidfile(); /* write pid to file */
- create_linkpidfile();
- }
-}
-
-/*
- * detach - detach us from the controlling terminal.
- */
-void
-detach()
-{
- int pid;
- char numbuf[16];
-
- if (detached)
- return;
- if ((pid = fork()) < 0) {
- error("Couldn't detach (fork failed: %m)");
- die(1); /* or just return? */
- }
- if (pid != 0) {
- /* parent */
- notify(pidchange, pid);
- exit(0); /* parent dies */
- }
- setsid();
- chdir("/");
- close(0);
- close(1);
- close(2);
- detached = 1;
- if (log_default)
- log_to_fd = -1;
- /* update pid files if they have been written already */
- if (pidfilename[0])
- create_pidfile();
- if (linkpidfile[0])
- create_linkpidfile();
- slprintf(numbuf, sizeof(numbuf), "%d", getpid());
- script_setenv("PPPD_PID", numbuf, 1);
-}
-
-/*
- * reopen_log - (re)open our connection to syslog.
- */
-void
-reopen_log()
-{
-#ifdef ULTRIX
- openlog("pppd", LOG_PID);
-#else
- openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
- setlogmask(LOG_UPTO(LOG_INFO));
-#endif
-}
-
-/*
- * Create a file containing our process ID.
- */
-static void
-create_pidfile()
-{
- FILE *pidfile;
-
- slprintf(pidfilename, sizeof(pidfilename), "%s%s.pid",
- _PATH_VARRUN, ifname);
- if ((pidfile = fopen(pidfilename, "w")) != NULL) {
- fprintf(pidfile, "%d\n", getpid());
- (void) fclose(pidfile);
- } else {
- error("Failed to create pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- }
-}
-
-static void
-create_linkpidfile()
-{
- FILE *pidfile;
-
- if (linkname[0] == 0)
- return;
- script_setenv("LINKNAME", linkname, 1);
- slprintf(linkpidfile, sizeof(linkpidfile), "%sppp-%s.pid",
- _PATH_VARRUN, linkname);
- if ((pidfile = fopen(linkpidfile, "w")) != NULL) {
- fprintf(pidfile, "%d\n", getpid());
- if (ifname[0])
- fprintf(pidfile, "%s\n", ifname);
- (void) fclose(pidfile);
- } else {
- error("Failed to create pid file %s: %m", linkpidfile);
- linkpidfile[0] = 0;
- }
-}
-
-/*
- * holdoff_end - called via a timeout when the holdoff period ends.
- */
-static void
-holdoff_end(arg)
- void *arg;
-{
- new_phase(PHASE_DORMANT);
-}
-
-/* List of protocol names, to make our messages a little more informative. */
-struct protocol_list {
- u_short proto;
- const char *name;
-} protocol_list[] = {
- { 0x21, "IP" },
- { 0x23, "OSI Network Layer" },
- { 0x25, "Xerox NS IDP" },
- { 0x27, "DECnet Phase IV" },
- { 0x29, "Appletalk" },
- { 0x2b, "Novell IPX" },
- { 0x2d, "VJ compressed TCP/IP" },
- { 0x2f, "VJ uncompressed TCP/IP" },
- { 0x31, "Bridging PDU" },
- { 0x33, "Stream Protocol ST-II" },
- { 0x35, "Banyan Vines" },
- { 0x39, "AppleTalk EDDP" },
- { 0x3b, "AppleTalk SmartBuffered" },
- { 0x3d, "Multi-Link" },
- { 0x3f, "NETBIOS Framing" },
- { 0x41, "Cisco Systems" },
- { 0x43, "Ascom Timeplex" },
- { 0x45, "Fujitsu Link Backup and Load Balancing (LBLB)" },
- { 0x47, "DCA Remote Lan" },
- { 0x49, "Serial Data Transport Protocol (PPP-SDTP)" },
- { 0x4b, "SNA over 802.2" },
- { 0x4d, "SNA" },
- { 0x4f, "IP6 Header Compression" },
- { 0x6f, "Stampede Bridging" },
- { 0xfb, "single-link compression" },
- { 0xfd, "1st choice compression" },
- { 0x0201, "802.1d Hello Packets" },
- { 0x0203, "IBM Source Routing BPDU" },
- { 0x0205, "DEC LANBridge100 Spanning Tree" },
- { 0x0231, "Luxcom" },
- { 0x0233, "Sigma Network Systems" },
- { 0x8021, "Internet Protocol Control Protocol" },
- { 0x8023, "OSI Network Layer Control Protocol" },
- { 0x8025, "Xerox NS IDP Control Protocol" },
- { 0x8027, "DECnet Phase IV Control Protocol" },
- { 0x8029, "Appletalk Control Protocol" },
- { 0x802b, "Novell IPX Control Protocol" },
- { 0x8031, "Bridging NCP" },
- { 0x8033, "Stream Protocol Control Protocol" },
- { 0x8035, "Banyan Vines Control Protocol" },
- { 0x803d, "Multi-Link Control Protocol" },
- { 0x803f, "NETBIOS Framing Control Protocol" },
- { 0x8041, "Cisco Systems Control Protocol" },
- { 0x8043, "Ascom Timeplex" },
- { 0x8045, "Fujitsu LBLB Control Protocol" },
- { 0x8047, "DCA Remote Lan Network Control Protocol (RLNCP)" },
- { 0x8049, "Serial Data Control Protocol (PPP-SDCP)" },
- { 0x804b, "SNA over 802.2 Control Protocol" },
- { 0x804d, "SNA Control Protocol" },
- { 0x804f, "IP6 Header Compression Control Protocol" },
- { 0x006f, "Stampede Bridging Control Protocol" },
- { 0x80fb, "Single Link Compression Control Protocol" },
- { 0x80fd, "Compression Control Protocol" },
- { 0xc021, "Link Control Protocol" },
- { 0xc023, "Password Authentication Protocol" },
- { 0xc025, "Link Quality Report" },
- { 0xc027, "Shiva Password Authentication Protocol" },
- { 0xc029, "CallBack Control Protocol (CBCP)" },
- { 0xc081, "Container Control Protocol" },
- { 0xc223, "Challenge Handshake Authentication Protocol" },
- { 0xc281, "Proprietary Authentication Protocol" },
- { 0, NULL },
-};
-
-/*
- * protocol_name - find a name for a PPP protocol.
- */
-const char *
-protocol_name(proto)
- int proto;
-{
- struct protocol_list *lp;
-
- for (lp = protocol_list; lp->proto != 0; ++lp)
- if (proto == lp->proto)
- return lp->name;
- return NULL;
-}
-
-/*
- * get_input - called when incoming data is available.
- */
-static void
-get_input()
-{
- int len, i;
- u_char *p;
- u_short protocol;
- struct protent *protp;
-
- p = inpacket_buf; /* point to beginning of packet buffer */
-
- len = read_packet(inpacket_buf);
- if (len < 0)
- return;
-
- if (len == 0) {
- notice("Modem hangup");
- hungup = 1;
- status = EXIT_HANGUP;
- lcp_lowerdown(0); /* serial link is no longer available */
- link_terminated(0);
- return;
- }
-
- if (debug /*&& (debugflags & DBG_INPACKET)*/)
- dbglog("rcvd %P", p, len);
-
- if (len < PPP_HDRLEN) {
- MAINDEBUG(("io(): Received short packet."));
- return;
- }
-
- p += 2; /* Skip address and control */
- GETSHORT(protocol, p);
- len -= PPP_HDRLEN;
-
- /*
- * Toss all non-LCP packets unless LCP is OPEN.
- */
- if (protocol != PPP_LCP && lcp_fsm[0].state != OPENED) {
- MAINDEBUG(("get_input: Received non-LCP packet when LCP not open."));
- return;
- }
-
- /*
- * Until we get past the authentication phase, toss all packets
- * except LCP, LQR and authentication packets.
- */
- if (phase <= PHASE_AUTHENTICATE
- && !(protocol == PPP_LCP || protocol == PPP_LQR
- || protocol == PPP_PAP || protocol == PPP_CHAP)) {
- MAINDEBUG(("get_input: discarding proto 0x%x in phase %d",
- protocol, phase));
- return;
- }
-
- /*
- * Upcall the proper protocol input routine.
- */
- for (i = 0; (protp = protocols[i]) != NULL; ++i) {
- if (protp->protocol == protocol && protp->enabled_flag) {
- (*protp->input)(0, p, len);
- return;
- }
- if (protocol == (protp->protocol & ~0x8000) && protp->enabled_flag
- && protp->datainput != NULL) {
- (*protp->datainput)(0, p, len);
- return;
- }
- }
-
- if (debug) {
- const char *pname = protocol_name(protocol);
- if (pname != NULL)
- warn("Unsupported protocol '%s' (0x%x) received", pname, protocol);
- else
- warn("Unsupported protocol 0x%x received", protocol);
- }
- lcp_sprotrej(0, p - PPP_HDRLEN, len + PPP_HDRLEN);
-}
-
-/*
- * new_phase - signal the start of a new phase of pppd's operation.
- */
-void
-new_phase(p)
- int p;
-{
- phase = p;
- if (new_phase_hook)
- (*new_phase_hook)(p);
- notify(phasechange, p);
-}
-
-/*
- * die - clean up state and exit with the specified status.
- */
-void
-die(status)
- int status;
-{
- cleanup();
- notify(exitnotify, status);
- syslog(LOG_INFO, "Exit.");
- exit(status);
-}
-
-/*
- * cleanup - restore anything which needs to be restored before we exit
- */
-/* ARGSUSED */
-static void
-cleanup()
-{
- sys_cleanup();
-
- if (fd_ppp >= 0)
- the_channel->disestablish_ppp(devfd);
- if (the_channel->cleanup)
- (*the_channel->cleanup)();
-
- if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", pidfilename);
- pidfilename[0] = 0;
- if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT)
- warn("unable to delete pid file %s: %m", linkpidfile);
- linkpidfile[0] = 0;
-
- if (pppdb != NULL)
- cleanup_db();
-}
-
-/*
- * update_link_stats - get stats at link termination.
- */
-void
-update_link_stats(u)
- int u;
-{
- struct timeval now;
- char numbuf[32];
-
- if (!get_ppp_stats(u, &link_stats)
- || gettimeofday(&now, NULL) < 0)
- return;
- link_connect_time = now.tv_sec - start_time.tv_sec;
- link_stats_valid = 1;
-
- slprintf(numbuf, sizeof(numbuf), "%d", link_connect_time);
- script_setenv("CONNECT_TIME", numbuf, 0);
- slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_out);
- script_setenv("BYTES_SENT", numbuf, 0);
- slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_in);
- script_setenv("BYTES_RCVD", numbuf, 0);
-}
-
-
-struct callout {
- struct timeval c_time; /* time at which to call routine */
- void *c_arg; /* argument to routine */
- void (*c_func) __P((void *)); /* routine */
- struct callout *c_next;
-};
-
-static struct callout *callout = NULL; /* Callout list */
-static struct timeval timenow; /* Current time */
-
-/*
- * timeout - Schedule a timeout.
- *
- * Note that this timeout takes the number of milliseconds, NOT hz (as in
- * the kernel).
- */
-void
-timeout(func, arg, secs, usecs)
- void (*func) __P((void *));
- void *arg;
- int secs, usecs;
-{
- struct callout *newp, *p, **pp;
-
- MAINDEBUG(("Timeout %p:%p in %d.%03d seconds.", func, arg,
- time / 1000, time % 1000));
-
- /*
- * Allocate timeout.
- */
- if ((newp = (struct callout *) malloc(sizeof(struct callout))) == NULL)
- fatal("Out of memory in timeout()!");
- newp->c_arg = arg;
- newp->c_func = func;
- gettimeofday(&timenow, NULL);
- newp->c_time.tv_sec = timenow.tv_sec + secs;
- newp->c_time.tv_usec = timenow.tv_usec + usecs;
- if (newp->c_time.tv_usec >= 1000000) {
- newp->c_time.tv_sec += newp->c_time.tv_usec / 1000000;
- newp->c_time.tv_usec %= 1000000;
- }
-
- /*
- * Find correct place and link it in.
- */
- for (pp = &callout; (p = *pp); pp = &p->c_next)
- if (newp->c_time.tv_sec < p->c_time.tv_sec
- || (newp->c_time.tv_sec == p->c_time.tv_sec
- && newp->c_time.tv_usec < p->c_time.tv_usec))
- break;
- newp->c_next = p;
- *pp = newp;
-}
-
-
-/*
- * untimeout - Unschedule a timeout.
- */
-void
-untimeout(func, arg)
- void (*func) __P((void *));
- void *arg;
-{
- struct callout **copp, *freep;
-
- MAINDEBUG(("Untimeout %p:%p.", func, arg));
-
- /*
- * Find first matching timeout and remove it from the list.
- */
- for (copp = &callout; (freep = *copp); copp = &freep->c_next)
- if (freep->c_func == func && freep->c_arg == arg) {
- *copp = freep->c_next;
- free((char *) freep);
- break;
- }
-}
-
-
-/*
- * calltimeout - Call any timeout routines which are now due.
- */
-static void
-calltimeout()
-{
- struct callout *p;
-
- while (callout != NULL) {
- p = callout;
-
- if (gettimeofday(&timenow, NULL) < 0)
- fatal("Failed to get time of day: %m");
- if (!(p->c_time.tv_sec < timenow.tv_sec
- || (p->c_time.tv_sec == timenow.tv_sec
- && p->c_time.tv_usec <= timenow.tv_usec)))
- break; /* no, it's not time yet */
-
- callout = p->c_next;
- (*p->c_func)(p->c_arg);
-
- free((char *) p);
- }
-}
-
-
-/*
- * timeleft - return the length of time until the next timeout is due.
- */
-static struct timeval *
-timeleft(tvp)
- struct timeval *tvp;
-{
- if (callout == NULL)
- return NULL;
-
- gettimeofday(&timenow, NULL);
- tvp->tv_sec = callout->c_time.tv_sec - timenow.tv_sec;
- tvp->tv_usec = callout->c_time.tv_usec - timenow.tv_usec;
- if (tvp->tv_usec < 0) {
- tvp->tv_usec += 1000000;
- tvp->tv_sec -= 1;
- }
- if (tvp->tv_sec < 0)
- tvp->tv_sec = tvp->tv_usec = 0;
-
- return tvp;
-}
-
-
-/*
- * kill_my_pg - send a signal to our process group, and ignore it ourselves.
- */
-static void
-kill_my_pg(sig)
- int sig;
-{
- struct sigaction act, oldact;
-
- act.sa_handler = SIG_IGN;
- act.sa_flags = 0;
- kill(0, sig);
- sigaction(sig, &act, &oldact);
- sigaction(sig, &oldact, NULL);
-}
-
-
-/*
- * hup - Catch SIGHUP signal.
- *
- * Indicates that the physical layer has been disconnected.
- * We don't rely on this indication; if the user has sent this
- * signal, we just take the link down.
- */
-static void
-hup(sig)
- int sig;
-{
- info("Hangup (SIGHUP)");
- got_sighup = 1;
- if (conn_running)
- /* Send the signal to the [dis]connector process(es) also */
- kill_my_pg(sig);
- notify(sigreceived, sig);
- if (waiting)
- siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * term - Catch SIGTERM signal and SIGINT signal (^C/del).
- *
- * Indicates that we should initiate a graceful disconnect and exit.
- */
-/*ARGSUSED*/
-static void
-term(sig)
- int sig;
-{
- info("Terminating on signal %d.", sig);
- got_sigterm = 1;
- if (conn_running)
- /* Send the signal to the [dis]connector process(es) also */
- kill_my_pg(sig);
- notify(sigreceived, sig);
- if (waiting)
- siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * chld - Catch SIGCHLD signal.
- * Sets a flag so we will call reap_kids in the mainline.
- */
-static void
-chld(sig)
- int sig;
-{
- got_sigchld = 1;
- if (waiting)
- siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * toggle_debug - Catch SIGUSR1 signal.
- *
- * Toggle debug flag.
- */
-/*ARGSUSED*/
-static void
-toggle_debug(sig)
- int sig;
-{
- debug = !debug;
- if (debug) {
- setlogmask(LOG_UPTO(LOG_DEBUG));
- } else {
- setlogmask(LOG_UPTO(LOG_WARNING));
- }
-}
-
-
-/*
- * open_ccp - Catch SIGUSR2 signal.
- *
- * Try to (re)negotiate compression.
- */
-/*ARGSUSED*/
-static void
-open_ccp(sig)
- int sig;
-{
- got_sigusr2 = 1;
- if (waiting)
- siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * bad_signal - We've caught a fatal signal. Clean up state and exit.
- */
-static void
-bad_signal(sig)
- int sig;
-{
- static int crashed = 0;
-
- if (crashed)
- _exit(127);
- crashed = 1;
- error("Fatal signal %d", sig);
- if (conn_running)
- kill_my_pg(SIGTERM);
- notify(sigreceived, sig);
- die(127);
-}
-
-
-/*
- * device_script - run a program to talk to the specified fds
- * (e.g. to run the connector or disconnector script).
- * stderr gets connected to the log fd or to the _PATH_CONNERRS file.
- */
-int
-device_script(program, in, out, dont_wait)
- char *program;
- int in, out;
- int dont_wait;
-{
- int pid, fd;
- int status = -1;
- int errfd;
-
- ++conn_running;
- pid = fork();
-
- if (pid < 0) {
- --conn_running;
- error("Failed to create child process: %m");
- return -1;
- }
-
- if (pid != 0) {
- if (dont_wait) {
- record_child(pid, program, NULL, NULL);
- status = 0;
- } else {
- while (waitpid(pid, &status, 0) < 0) {
- if (errno == EINTR)
- continue;
- fatal("error waiting for (dis)connection process: %m");
- }
- --conn_running;
- }
- return (status == 0 ? 0 : -1);
- }
-
- /* here we are executing in the child */
- /* make sure fds 0, 1, 2 are occupied */
- while ((fd = dup(in)) >= 0) {
- if (fd > 2) {
- close(fd);
- break;
- }
- }
-
- /* dup in and out to fds > 2 */
- in = dup(in);
- out = dup(out);
- if (log_to_fd >= 0) {
- errfd = dup(log_to_fd);
- } else {
- errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0600);
- }
-
- /* close fds 0 - 2 and any others we can think of */
- close(0);
- close(1);
- close(2);
- sys_close();
- if (the_channel->close)
- (*the_channel->close)();
- closelog();
-
- /* dup the in, out, err fds to 0, 1, 2 */
- dup2(in, 0);
- close(in);
- dup2(out, 1);
- close(out);
- if (errfd >= 0) {
- dup2(errfd, 2);
- close(errfd);
- }
-
- setuid(uid);
- if (getuid() != uid) {
- error("setuid failed");
- exit(1);
- }
- setgid(getgid());
- {
- int argc = 0;
- char * argv[500];
- char * ptr = program;
- while (ptr != NULL) {
- argv[argc] = ptr;
- argc++;
- ptr = strchr(ptr, ' ');
- if (ptr) {
- ptr[0] = '\0';
- ptr++;
- }
- }
- argv[argc] = NULL;
- execv(argv[0], argv);
- error("could not exec %s: %m", program);
- exit(99);
- }
- /* NOTREACHED */
-}
-
-
-/*
- * run-program - execute a program with given arguments,
- * but don't wait for it.
- * If the program can't be executed, logs an error unless
- * must_exist is 0 and the program file doesn't exist.
- * Returns -1 if it couldn't fork, 0 if the file doesn't exist
- * or isn't an executable plain file, or the process ID of the child.
- * If done != NULL, (*done)(arg) will be called later (within
- * reap_kids) iff the return value is > 0.
- */
-pid_t
-run_program(prog, args, must_exist, done, arg)
- char *prog;
- char **args;
- int must_exist;
- void (*done) __P((void *));
- void *arg;
-{
- int pid;
- struct stat sbuf;
-
- /*
- * First check if the file exists and is executable.
- * We don't use access() because that would use the
- * real user-id, which might not be root, and the script
- * might be accessible only to root.
- */
- errno = EINVAL;
- if (stat(prog, &sbuf) < 0 || !S_ISREG(sbuf.st_mode)
- || (sbuf.st_mode & (S_IXUSR|S_IXGRP|S_IXOTH)) == 0) {
- if (must_exist || errno != ENOENT)
- warn("Can't execute %s: %m", prog);
- return 0;
- }
-
- pid = fork();
- if (pid == -1) {
- error("Failed to create child process for %s: %m", prog);
- return -1;
- }
- if (pid == 0) {
- int new_fd;
-
- /* Leave the current location */
- (void) setsid(); /* No controlling tty. */
- (void) umask (S_IRWXG|S_IRWXO);
- (void) chdir ("/"); /* no current directory. */
- setuid(0); /* set real UID = root */
- setgid(getegid());
-
- /* Ensure that nothing of our device environment is inherited. */
- sys_close();
- closelog();
- close (0);
- close (1);
- close (2);
- if (the_channel->close)
- (*the_channel->close)();
-
- /* Don't pass handles to the PPP device, even by accident. */
- new_fd = open (_PATH_DEVNULL, O_RDWR);
- if (new_fd >= 0) {
- if (new_fd != 0) {
- dup2 (new_fd, 0); /* stdin <- /dev/null */
- close (new_fd);
- }
- dup2 (0, 1); /* stdout -> /dev/null */
- dup2 (0, 2); /* stderr -> /dev/null */
- }
-
-#ifdef BSD
- /* Force the priority back to zero if pppd is running higher. */
- if (setpriority (PRIO_PROCESS, 0, 0) < 0)
- warn("can't reset priority to 0: %m");
-#endif
-
- /* SysV recommends a second fork at this point. */
-
- /* run the program */
- execve(prog, args, script_env);
- if (must_exist || errno != ENOENT) {
- /* have to reopen the log, there's nowhere else
- for the message to go. */
- reopen_log();
- syslog(LOG_ERR, "Can't execute %s: %m", prog);
- closelog();
- }
- _exit(-1);
- }
-
- if (debug)
- dbglog("Script %s started (pid %d)", prog, pid);
- record_child(pid, prog, done, arg);
-
- return pid;
-}
-
-
-/*
- * record_child - add a child process to the list for reap_kids
- * to use.
- */
-void
-record_child(pid, prog, done, arg)
- int pid;
- char *prog;
- void (*done) __P((void *));
- void *arg;
-{
- struct subprocess *chp;
-
- ++n_children;
-
- chp = (struct subprocess *) malloc(sizeof(struct subprocess));
- if (chp == NULL) {
- warn("losing track of %s process", prog);
- } else {
- chp->pid = pid;
- chp->prog = prog;
- chp->done = done;
- chp->arg = arg;
- chp->next = children;
- children = chp;
- }
-}
-
-
-/*
- * reap_kids - get status from any dead child processes,
- * and log a message for abnormal terminations.
- */
-static int
-reap_kids(waitfor)
- int waitfor;
-{
- int pid, status;
- struct subprocess *chp, **prevp;
-
- if (n_children == 0)
- return 0;
- while ((pid = waitpid(-1, &status, (waitfor? 0: WNOHANG))) != -1
- && pid != 0) {
- for (prevp = &children; (chp = *prevp) != NULL; prevp = &chp->next) {
- if (chp->pid == pid) {
- --n_children;
- *prevp = chp->next;
- break;
- }
- }
- if (WIFSIGNALED(status)) {
- warn("Child process %s (pid %d) terminated with signal %d",
- (chp? chp->prog: "??"), pid, WTERMSIG(status));
- } else if (debug)
- dbglog("Script %s finished (pid %d), status = 0x%x",
- (chp? chp->prog: "??"), pid, status);
- if (chp && chp->done)
- (*chp->done)(chp->arg);
- if (chp)
- free(chp);
- }
- if (pid == -1) {
- if (errno == ECHILD)
- return -1;
- if (errno != EINTR)
- error("Error waiting for child process: %m");
- }
- return 0;
-}
-
-/*
- * add_notifier - add a new function to be called when something happens.
- */
-void
-add_notifier(notif, func, arg)
- struct notifier **notif;
- notify_func func;
- void *arg;
-{
- struct notifier *np;
-
- np = malloc(sizeof(struct notifier));
- if (np == 0)
- novm("notifier struct");
- np->next = *notif;
- np->func = func;
- np->arg = arg;
- *notif = np;
-}
-
-/*
- * remove_notifier - remove a function from the list of things to
- * be called when something happens.
- */
-void
-remove_notifier(notif, func, arg)
- struct notifier **notif;
- notify_func func;
- void *arg;
-{
- struct notifier *np;
-
- for (; (np = *notif) != 0; notif = &np->next) {
- if (np->func == func && np->arg == arg) {
- *notif = np->next;
- free(np);
- break;
- }
- }
-}
-
-/*
- * notify - call a set of functions registered with add_notify.
- */
-void
-notify(notif, val)
- struct notifier *notif;
- int val;
-{
- struct notifier *np;
-
- while ((np = notif) != 0) {
- notif = np->next;
- (*np->func)(np->arg, val);
- }
-}
-
-/*
- * novm - log an error message saying we ran out of memory, and die.
- */
-void
-novm(msg)
- char *msg;
-{
- fatal("Virtual memory exhausted allocating %s\n", msg);
-}
-
-/*
- * script_setenv - set an environment variable value to be used
- * for scripts that we run (e.g. ip-up, auth-up, etc.)
- */
-void
-script_setenv(var, value, iskey)
- char *var, *value;
- int iskey;
-{
- size_t varl = strlen(var);
- size_t vl = varl + strlen(value) + 2;
- int i;
- char *p, *newstring;
-
- newstring = (char *) malloc(vl+1);
- if (newstring == 0)
- return;
- *newstring++ = iskey;
- slprintf(newstring, vl, "%s=%s", var, value);
-
- /* check if this variable is already set */
- if (script_env != 0) {
- for (i = 0; (p = script_env[i]) != 0; ++i) {
- if (strncmp(p, var, varl) == 0 && p[varl] == '=') {
- if (p[-1] && pppdb != NULL)
- delete_db_key(p);
- free(p-1);
- script_env[i] = newstring;
- if (iskey && pppdb != NULL)
- add_db_key(newstring);
- update_db_entry();
- return;
- }
- }
- } else {
- /* no space allocated for script env. ptrs. yet */
- i = 0;
- script_env = (char **) malloc(16 * sizeof(char *));
- if (script_env == 0)
- return;
- s_env_nalloc = 16;
- }
-
- /* reallocate script_env with more space if needed */
- if (i + 1 >= s_env_nalloc) {
- int new_n = i + 17;
- char **newenv = (char **) realloc((void *)script_env,
- new_n * sizeof(char *));
- if (newenv == 0)
- return;
- script_env = newenv;
- s_env_nalloc = new_n;
- }
-
- script_env[i] = newstring;
- script_env[i+1] = 0;
-
- if (pppdb != NULL) {
- if (iskey)
- add_db_key(newstring);
- update_db_entry();
- }
-}
-
-/*
- * script_unsetenv - remove a variable from the environment
- * for scripts.
- */
-void
-script_unsetenv(var)
- char *var;
-{
- int vl = strlen(var);
- int i;
- char *p;
-
- if (script_env == 0)
- return;
- for (i = 0; (p = script_env[i]) != 0; ++i) {
- if (strncmp(p, var, vl) == 0 && p[vl] == '=') {
- if (p[-1] && pppdb != NULL)
- delete_db_key(p);
- free(p-1);
- while ((script_env[i] = script_env[i+1]) != 0)
- ++i;
- break;
- }
- }
- if (pppdb != NULL)
- update_db_entry();
-}
-
-/*
- * update_db_entry - update our entry in the database.
- */
-static void
-update_db_entry()
-{
- TDB_DATA key, dbuf;
- int vlen, i;
- char *p, *q, *vbuf;
-
- if (script_env == NULL)
- return;
- vlen = 0;
- for (i = 0; (p = script_env[i]) != 0; ++i)
- vlen += strlen(p) + 1;
- vbuf = malloc(vlen);
- if (vbuf == 0)
- novm("database entry");
- q = vbuf;
- for (i = 0; (p = script_env[i]) != 0; ++i)
- q += slprintf(q, vbuf + vlen - q, "%s;", p);
-
- key.dptr = db_key;
- key.dsize = strlen(db_key);
- dbuf.dptr = vbuf;
- dbuf.dsize = vlen;
- if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
- error("tdb_store failed: %s", tdb_error(pppdb));
-
-}
-
-/*
- * add_db_key - add a key that we can use to look up our database entry.
- */
-static void
-add_db_key(str)
- const char *str;
-{
- TDB_DATA key, dbuf;
-
- key.dptr = (char *) str;
- key.dsize = strlen(str);
- dbuf.dptr = db_key;
- dbuf.dsize = strlen(db_key);
- if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
- error("tdb_store key failed: %s", tdb_error(pppdb));
-}
-
-/*
- * delete_db_key - delete a key for looking up our database entry.
- */
-static void
-delete_db_key(str)
- const char *str;
-{
- TDB_DATA key;
-
- key.dptr = (char *) str;
- key.dsize = strlen(str);
- tdb_delete(pppdb, key);
-}
-
-/*
- * cleanup_db - delete all the entries we put in the database.
- */
-static void
-cleanup_db()
-{
- TDB_DATA key;
- int i;
- char *p;
-
- key.dptr = db_key;
- key.dsize = strlen(db_key);
- tdb_delete(pppdb, key);
- for (i = 0; (p = script_env[i]) != 0; ++i)
- if (p[-1])
- delete_db_key(p);
-}
diff --git a/mdk-stage1/ppp/pppd/md4.c b/mdk-stage1/ppp/pppd/md4.c
deleted file mode 100644
index cda9f943d..000000000
--- a/mdk-stage1/ppp/pppd/md4.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
-** ********************************************************************
-** md4.c -- Implementation of MD4 Message Digest Algorithm **
-** Updated: 2/16/90 by Ronald L. Rivest **
-** (C) 1990 RSA Data Security, Inc. **
-** ********************************************************************
-*/
-
-/*
-** To use MD4:
-** -- Include md4.h in your program
-** -- Declare an MDstruct MD to hold the state of the digest
-** computation.
-** -- Initialize MD using MDbegin(&MD)
-** -- For each full block (64 bytes) X you wish to process, call
-** MD4Update(&MD,X,512)
-** (512 is the number of bits in a full block.)
-** -- For the last block (less than 64 bytes) you wish to process,
-** MD4Update(&MD,X,n)
-** where n is the number of bits in the partial block. A partial
-** block terminates the computation, so every MD computation
-** should terminate by processing a partial block, even if it
-** has n = 0.
-** -- The message digest is available in MD.buffer[0] ...
-** MD.buffer[3]. (Least-significant byte of each word
-** should be output first.)
-** -- You can print out the digest using MDprint(&MD)
-*/
-
-/* Implementation notes:
-** This implementation assumes that ints are 32-bit quantities.
-*/
-
-#define TRUE 1
-#define FALSE 0
-
-/* Compile-time includes
-*/
-#include <stdio.h>
-#include "md4.h"
-#include "pppd.h"
-
-/* Compile-time declarations of MD4 "magic constants".
-*/
-#define I0 0x67452301 /* Initial values for MD buffer */
-#define I1 0xefcdab89
-#define I2 0x98badcfe
-#define I3 0x10325476
-#define C2 013240474631 /* round 2 constant = sqrt(2) in octal */
-#define C3 015666365641 /* round 3 constant = sqrt(3) in octal */
-/* C2 and C3 are from Knuth, The Art of Programming, Volume 2
-** (Seminumerical Algorithms), Second Edition (1981), Addison-Wesley.
-** Table 2, page 660.
-*/
-
-#define fs1 3 /* round 1 shift amounts */
-#define fs2 7
-#define fs3 11
-#define fs4 19
-#define gs1 3 /* round 2 shift amounts */
-#define gs2 5
-#define gs3 9
-#define gs4 13
-#define hs1 3 /* round 3 shift amounts */
-#define hs2 9
-#define hs3 11
-#define hs4 15
-
-/* Compile-time macro declarations for MD4.
-** Note: The "rot" operator uses the variable "tmp".
-** It assumes tmp is declared as unsigned int, so that the >>
-** operator will shift in zeros rather than extending the sign bit.
-*/
-#define f(X,Y,Z) ((X&Y) | ((~X)&Z))
-#define g(X,Y,Z) ((X&Y) | (X&Z) | (Y&Z))
-#define h(X,Y,Z) (X^Y^Z)
-#define rot(X,S) (tmp=X,(tmp<<S) | (tmp>>(32-S)))
-#define ff(A,B,C,D,i,s) A = rot((A + f(B,C,D) + X[i]),s)
-#define gg(A,B,C,D,i,s) A = rot((A + g(B,C,D) + X[i] + C2),s)
-#define hh(A,B,C,D,i,s) A = rot((A + h(B,C,D) + X[i] + C3),s)
-
-/* MD4print(MDp)
-** Print message digest buffer MDp as 32 hexadecimal digits.
-** Order is from low-order byte of buffer[0] to high-order byte of
-** buffer[3].
-** Each byte is printed with high-order hexadecimal digit first.
-** This is a user-callable routine.
-*/
-void
-MD4Print(MDp)
-MD4_CTX *MDp;
-{
- int i,j;
- for (i=0;i<4;i++)
- for (j=0;j<32;j=j+8)
- printf("%02x",(MDp->buffer[i]>>j) & 0xFF);
-}
-
-/* MD4Init(MDp)
-** Initialize message digest buffer MDp.
-** This is a user-callable routine.
-*/
-void
-MD4Init(MDp)
-MD4_CTX *MDp;
-{
- int i;
- MDp->buffer[0] = I0;
- MDp->buffer[1] = I1;
- MDp->buffer[2] = I2;
- MDp->buffer[3] = I3;
- for (i=0;i<8;i++) MDp->count[i] = 0;
- MDp->done = 0;
-}
-
-/* MDblock(MDp,X)
-** Update message digest buffer MDp->buffer using 16-word data block X.
-** Assumes all 16 words of X are full of data.
-** Does not update MDp->count.
-** This routine is not user-callable.
-*/
-static void
-MDblock(MDp,Xb)
-MD4_CTX *MDp;
-unsigned char *Xb;
-{
- register unsigned int tmp, A, B, C, D;
- unsigned int X[16];
- int i;
-
- for (i = 0; i < 16; ++i) {
- X[i] = Xb[0] + (Xb[1] << 8) + (Xb[2] << 16) + (Xb[3] << 24);
- Xb += 4;
- }
-
- A = MDp->buffer[0];
- B = MDp->buffer[1];
- C = MDp->buffer[2];
- D = MDp->buffer[3];
- /* Update the message digest buffer */
- ff(A , B , C , D , 0 , fs1); /* Round 1 */
- ff(D , A , B , C , 1 , fs2);
- ff(C , D , A , B , 2 , fs3);
- ff(B , C , D , A , 3 , fs4);
- ff(A , B , C , D , 4 , fs1);
- ff(D , A , B , C , 5 , fs2);
- ff(C , D , A , B , 6 , fs3);
- ff(B , C , D , A , 7 , fs4);
- ff(A , B , C , D , 8 , fs1);
- ff(D , A , B , C , 9 , fs2);
- ff(C , D , A , B , 10 , fs3);
- ff(B , C , D , A , 11 , fs4);
- ff(A , B , C , D , 12 , fs1);
- ff(D , A , B , C , 13 , fs2);
- ff(C , D , A , B , 14 , fs3);
- ff(B , C , D , A , 15 , fs4);
- gg(A , B , C , D , 0 , gs1); /* Round 2 */
- gg(D , A , B , C , 4 , gs2);
- gg(C , D , A , B , 8 , gs3);
- gg(B , C , D , A , 12 , gs4);
- gg(A , B , C , D , 1 , gs1);
- gg(D , A , B , C , 5 , gs2);
- gg(C , D , A , B , 9 , gs3);
- gg(B , C , D , A , 13 , gs4);
- gg(A , B , C , D , 2 , gs1);
- gg(D , A , B , C , 6 , gs2);
- gg(C , D , A , B , 10 , gs3);
- gg(B , C , D , A , 14 , gs4);
- gg(A , B , C , D , 3 , gs1);
- gg(D , A , B , C , 7 , gs2);
- gg(C , D , A , B , 11 , gs3);
- gg(B , C , D , A , 15 , gs4);
- hh(A , B , C , D , 0 , hs1); /* Round 3 */
- hh(D , A , B , C , 8 , hs2);
- hh(C , D , A , B , 4 , hs3);
- hh(B , C , D , A , 12 , hs4);
- hh(A , B , C , D , 2 , hs1);
- hh(D , A , B , C , 10 , hs2);
- hh(C , D , A , B , 6 , hs3);
- hh(B , C , D , A , 14 , hs4);
- hh(A , B , C , D , 1 , hs1);
- hh(D , A , B , C , 9 , hs2);
- hh(C , D , A , B , 5 , hs3);
- hh(B , C , D , A , 13 , hs4);
- hh(A , B , C , D , 3 , hs1);
- hh(D , A , B , C , 11 , hs2);
- hh(C , D , A , B , 7 , hs3);
- hh(B , C , D , A , 15 , hs4);
- MDp->buffer[0] += A;
- MDp->buffer[1] += B;
- MDp->buffer[2] += C;
- MDp->buffer[3] += D;
-}
-
-/* MD4Update(MDp,X,count)
-** Input: X -- a pointer to an array of unsigned characters.
-** count -- the number of bits of X to use.
-** (if not a multiple of 8, uses high bits of last byte.)
-** Update MDp using the number of bits of X given by count.
-** This is the basic input routine for an MD4 user.
-** The routine completes the MD computation when count < 512, so
-** every MD computation should end with one call to MD4Update with a
-** count less than 512. A call with count 0 will be ignored if the
-** MD has already been terminated (done != 0), so an extra call with
-** count 0 can be given as a "courtesy close" to force termination
-** if desired.
-*/
-void
-MD4Update(MDp,X,count)
-MD4_CTX *MDp;
-unsigned char *X;
-unsigned int count;
-{
- unsigned int i, tmp, bit, byte, mask;
- unsigned char XX[64];
- unsigned char *p;
-
- /* return with no error if this is a courtesy close with count
- ** zero and MDp->done is true.
- */
- if (count == 0 && MDp->done) return;
- /* check to see if MD is already done and report error */
- if (MDp->done)
- { printf("\nError: MD4Update MD already done."); return; }
-
- /* Add count to MDp->count */
- tmp = count;
- p = MDp->count;
- while (tmp)
- { tmp += *p;
- *p++ = tmp;
- tmp = tmp >> 8;
- }
-
- /* Process data */
- if (count == 512)
- { /* Full block of data to handle */
- MDblock(MDp,X);
- }
- else if (count > 512) /* Check for count too large */
- {
- printf("\nError: MD4Update called with illegal count value %d.",
- count);
- return;
- }
- else /* partial block -- must be last block so finish up */
- {
- /* Find out how many bytes and residual bits there are */
- byte = count >> 3;
- bit = count & 7;
- /* Copy X into XX since we need to modify it */
- for (i=0;i<=byte;i++) XX[i] = X[i];
- for (i=byte+1;i<64;i++) XX[i] = 0;
- /* Add padding '1' bit and low-order zeros in last byte */
- mask = 1 << (7 - bit);
- XX[byte] = (XX[byte] | mask) & ~( mask - 1);
- /* If room for bit count, finish up with this block */
- if (byte <= 55)
- {
- for (i=0;i<8;i++) XX[56+i] = MDp->count[i];
- MDblock(MDp,XX);
- }
- else /* need to do two blocks to finish up */
- {
- MDblock(MDp,XX);
- for (i=0;i<56;i++) XX[i] = 0;
- for (i=0;i<8;i++) XX[56+i] = MDp->count[i];
- MDblock(MDp,XX);
- }
- /* Set flag saying we're done with MD computation */
- MDp->done = 1;
- }
-}
-
-/*
-** Finish up MD4 computation and return message digest.
-*/
-void
-MD4Final(buf, MD)
-unsigned char *buf;
-MD4_CTX *MD;
-{
- int i, j;
- unsigned int w;
-
- MD4Update(MD, NULL, 0);
- for (i = 0; i < 4; ++i) {
- w = MD->buffer[i];
- for (j = 0; j < 4; ++j) {
- *buf++ = w;
- w >>= 8;
- }
- }
-}
-
-/*
-** End of md4.c
-****************************(cut)***********************************/
diff --git a/mdk-stage1/ppp/pppd/md4.h b/mdk-stage1/ppp/pppd/md4.h
deleted file mode 100644
index 80e8f9a2a..000000000
--- a/mdk-stage1/ppp/pppd/md4.h
+++ /dev/null
@@ -1,64 +0,0 @@
-
-/*
-** ********************************************************************
-** md4.h -- Header file for implementation of **
-** MD4 Message Digest Algorithm **
-** Updated: 2/13/90 by Ronald L. Rivest **
-** (C) 1990 RSA Data Security, Inc. **
-** ********************************************************************
-*/
-
-#ifndef __P
-# if defined(__STDC__) || defined(__GNUC__)
-# define __P(x) x
-# else
-# define __P(x) ()
-# endif
-#endif
-
-
-/* MDstruct is the data structure for a message digest computation.
-*/
-typedef struct {
- unsigned int buffer[4]; /* Holds 4-word result of MD computation */
- unsigned char count[8]; /* Number of bits processed so far */
- unsigned int done; /* Nonzero means MD computation finished */
-} MD4_CTX;
-
-/* MD4Init(MD4_CTX *)
-** Initialize the MD4_CTX prepatory to doing a message digest
-** computation.
-*/
-extern void MD4Init __P((MD4_CTX *MD));
-
-/* MD4Update(MD,X,count)
-** Input: X -- a pointer to an array of unsigned characters.
-** count -- the number of bits of X to use (an unsigned int).
-** Updates MD using the first "count" bits of X.
-** The array pointed to by X is not modified.
-** If count is not a multiple of 8, MD4Update uses high bits of
-** last byte.
-** This is the basic input routine for a user.
-** The routine terminates the MD computation when count < 512, so
-** every MD computation should end with one call to MD4Update with a
-** count less than 512. Zero is OK for a count.
-*/
-extern void MD4Update __P((MD4_CTX *MD, unsigned char *X, unsigned int count));
-
-/* MD4Print(MD)
-** Prints message digest buffer MD as 32 hexadecimal digits.
-** Order is from low-order byte of buffer[0] to high-order byte
-** of buffer[3].
-** Each byte is printed with high-order hexadecimal digit first.
-*/
-extern void MD4Print __P((MD4_CTX *));
-
-/* MD4Final(buf, MD)
-** Returns message digest from MD and terminates the message
-** digest computation.
-*/
-extern void MD4Final __P((unsigned char *, MD4_CTX *));
-
-/*
-** End of md4.h
-****************************(cut)***********************************/
diff --git a/mdk-stage1/ppp/pppd/md5.c b/mdk-stage1/ppp/pppd/md5.c
deleted file mode 100644
index 0b8de3aae..000000000
--- a/mdk-stage1/ppp/pppd/md5.c
+++ /dev/null
@@ -1,309 +0,0 @@
-
-
-/*
- ***********************************************************************
- ** md5.c -- the source code for MD5 routines **
- ** RSA Data Security, Inc. MD5 Message-Digest Algorithm **
- ** Created: 2/17/90 RLR **
- ** Revised: 1/91 SRD,AJ,BSK,JT Reference C ver., 7/10 constant corr. **
- ***********************************************************************
- */
-
-/*
- ***********************************************************************
- ** Copyright (C) 1990, RSA Data Security, Inc. All rights reserved. **
- ** **
- ** License to copy and use this software is granted provided that **
- ** it is identified as the "RSA Data Security, Inc. MD5 Message- **
- ** Digest Algorithm" in all material mentioning or referencing this **
- ** software or this function. **
- ** **
- ** License is also granted to make and use derivative works **
- ** provided that such works are identified as "derived from the RSA **
- ** Data Security, Inc. MD5 Message-Digest Algorithm" in all **
- ** material mentioning or referencing the derived work. **
- ** **
- ** RSA Data Security, Inc. makes no representations concerning **
- ** either the merchantability of this software or the suitability **
- ** of this software for any particular purpose. It is provided "as **
- ** is" without express or implied warranty of any kind. **
- ** **
- ** These notices must be retained in any copies of any part of this **
- ** documentation and/or software. **
- ***********************************************************************
- */
-
-#include <stdlib.h>
-#include <string.h>
-
-#include "md5.h"
-
-/*
- ***********************************************************************
- ** Message-digest routines: **
- ** To form the message digest for a message M **
- ** (1) Initialize a context buffer mdContext using MD5Init **
- ** (2) Call MD5Update on mdContext and M **
- ** (3) Call MD5Final on mdContext **
- ** The message digest is now in mdContext->digest[0...15] **
- ***********************************************************************
- */
-
-/* forward declaration */
-static void Transform ();
-
-static unsigned char PADDING[64] = {
- 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-/* F, G, H and I are basic MD5 functions */
-#define F(x, y, z) (((x) & (y)) | ((~x) & (z)))
-#define G(x, y, z) (((x) & (z)) | ((y) & (~z)))
-#define H(x, y, z) ((x) ^ (y) ^ (z))
-#define I(x, y, z) ((y) ^ ((x) | (~z)))
-
-/* ROTATE_LEFT rotates x left n bits */
-#define ROTATE_LEFT(x, n) (((x) << (n)) | ((x) >> (32-(n))))
-
-/* FF, GG, HH, and II transformations for rounds 1, 2, 3, and 4 */
-/* Rotation is separate from addition to prevent recomputation */
-#define FF(a, b, c, d, x, s, ac) \
- {(a) += F ((b), (c), (d)) + (x) + (UINT4)(ac); \
- (a) = ROTATE_LEFT ((a), (s)); \
- (a) += (b); \
- }
-#define GG(a, b, c, d, x, s, ac) \
- {(a) += G ((b), (c), (d)) + (x) + (UINT4)(ac); \
- (a) = ROTATE_LEFT ((a), (s)); \
- (a) += (b); \
- }
-#define HH(a, b, c, d, x, s, ac) \
- {(a) += H ((b), (c), (d)) + (x) + (UINT4)(ac); \
- (a) = ROTATE_LEFT ((a), (s)); \
- (a) += (b); \
- }
-#define II(a, b, c, d, x, s, ac) \
- {(a) += I ((b), (c), (d)) + (x) + (UINT4)(ac); \
- (a) = ROTATE_LEFT ((a), (s)); \
- (a) += (b); \
- }
-
-#ifdef __STDC__
-#define UL(x) x##U
-#else
-#define UL(x) x
-#endif
-
-/* The routine MD5Init initializes the message-digest context
- mdContext. All fields are set to zero.
- */
-void MD5Init (mdContext)
-MD5_CTX *mdContext;
-{
- mdContext->i[0] = mdContext->i[1] = (UINT4)0;
-
- /* Load magic initialization constants.
- */
- mdContext->buf[0] = (UINT4)0x67452301;
- mdContext->buf[1] = (UINT4)0xefcdab89;
- mdContext->buf[2] = (UINT4)0x98badcfe;
- mdContext->buf[3] = (UINT4)0x10325476;
-}
-
-/* The routine MD5Update updates the message-digest context to
- account for the presence of each of the characters inBuf[0..inLen-1]
- in the message whose digest is being computed.
- */
-void MD5Update (mdContext, inBuf, inLen)
-MD5_CTX *mdContext;
-unsigned char *inBuf;
-unsigned int inLen;
-{
- UINT4 in[16];
- int mdi;
- unsigned int i, ii;
-
- /* compute number of bytes mod 64 */
- mdi = (int)((mdContext->i[0] >> 3) & 0x3F);
-
- /* update number of bits */
- if ((mdContext->i[0] + ((UINT4)inLen << 3)) < mdContext->i[0])
- mdContext->i[1]++;
- mdContext->i[0] += ((UINT4)inLen << 3);
- mdContext->i[1] += ((UINT4)inLen >> 29);
-
- while (inLen--) {
- /* add new character to buffer, increment mdi */
- mdContext->in[mdi++] = *inBuf++;
-
- /* transform if necessary */
- if (mdi == 0x40) {
- for (i = 0, ii = 0; i < 16; i++, ii += 4)
- in[i] = (((UINT4)mdContext->in[ii+3]) << 24) |
- (((UINT4)mdContext->in[ii+2]) << 16) |
- (((UINT4)mdContext->in[ii+1]) << 8) |
- ((UINT4)mdContext->in[ii]);
- Transform (mdContext->buf, in);
- mdi = 0;
- }
- }
-}
-
-/* The routine MD5Final terminates the message-digest computation and
- ends with the desired message digest in mdContext->digest[0...15].
- */
-void MD5Final (hash, mdContext)
-unsigned char hash[];
-MD5_CTX *mdContext;
-{
- UINT4 in[16];
- int mdi;
- unsigned int i, ii;
- unsigned int padLen;
-
- /* save number of bits */
- in[14] = mdContext->i[0];
- in[15] = mdContext->i[1];
-
- /* compute number of bytes mod 64 */
- mdi = (int)((mdContext->i[0] >> 3) & 0x3F);
-
- /* pad out to 56 mod 64 */
- padLen = (mdi < 56) ? (56 - mdi) : (120 - mdi);
- MD5Update (mdContext, PADDING, padLen);
-
- /* append length in bits and transform */
- for (i = 0, ii = 0; i < 14; i++, ii += 4)
- in[i] = (((UINT4)mdContext->in[ii+3]) << 24) |
- (((UINT4)mdContext->in[ii+2]) << 16) |
- (((UINT4)mdContext->in[ii+1]) << 8) |
- ((UINT4)mdContext->in[ii]);
- Transform (mdContext->buf, in);
-
- /* store buffer in digest */
- for (i = 0, ii = 0; i < 4; i++, ii += 4) {
- mdContext->digest[ii] = (unsigned char)(mdContext->buf[i] & 0xFF);
- mdContext->digest[ii+1] =
- (unsigned char)((mdContext->buf[i] >> 8) & 0xFF);
- mdContext->digest[ii+2] =
- (unsigned char)((mdContext->buf[i] >> 16) & 0xFF);
- mdContext->digest[ii+3] =
- (unsigned char)((mdContext->buf[i] >> 24) & 0xFF);
- }
- memcpy(hash, mdContext->digest, 16);
-}
-
-/* Basic MD5 step. Transforms buf based on in.
- */
-static void Transform (buf, in)
-UINT4 *buf;
-UINT4 *in;
-{
- UINT4 a = buf[0], b = buf[1], c = buf[2], d = buf[3];
-
- /* Round 1 */
-#define S11 7
-#define S12 12
-#define S13 17
-#define S14 22
- FF ( a, b, c, d, in[ 0], S11, UL(3614090360)); /* 1 */
- FF ( d, a, b, c, in[ 1], S12, UL(3905402710)); /* 2 */
- FF ( c, d, a, b, in[ 2], S13, UL( 606105819)); /* 3 */
- FF ( b, c, d, a, in[ 3], S14, UL(3250441966)); /* 4 */
- FF ( a, b, c, d, in[ 4], S11, UL(4118548399)); /* 5 */
- FF ( d, a, b, c, in[ 5], S12, UL(1200080426)); /* 6 */
- FF ( c, d, a, b, in[ 6], S13, UL(2821735955)); /* 7 */
- FF ( b, c, d, a, in[ 7], S14, UL(4249261313)); /* 8 */
- FF ( a, b, c, d, in[ 8], S11, UL(1770035416)); /* 9 */
- FF ( d, a, b, c, in[ 9], S12, UL(2336552879)); /* 10 */
- FF ( c, d, a, b, in[10], S13, UL(4294925233)); /* 11 */
- FF ( b, c, d, a, in[11], S14, UL(2304563134)); /* 12 */
- FF ( a, b, c, d, in[12], S11, UL(1804603682)); /* 13 */
- FF ( d, a, b, c, in[13], S12, UL(4254626195)); /* 14 */
- FF ( c, d, a, b, in[14], S13, UL(2792965006)); /* 15 */
- FF ( b, c, d, a, in[15], S14, UL(1236535329)); /* 16 */
-
- /* Round 2 */
-#define S21 5
-#define S22 9
-#define S23 14
-#define S24 20
- GG ( a, b, c, d, in[ 1], S21, UL(4129170786)); /* 17 */
- GG ( d, a, b, c, in[ 6], S22, UL(3225465664)); /* 18 */
- GG ( c, d, a, b, in[11], S23, UL( 643717713)); /* 19 */
- GG ( b, c, d, a, in[ 0], S24, UL(3921069994)); /* 20 */
- GG ( a, b, c, d, in[ 5], S21, UL(3593408605)); /* 21 */
- GG ( d, a, b, c, in[10], S22, UL( 38016083)); /* 22 */
- GG ( c, d, a, b, in[15], S23, UL(3634488961)); /* 23 */
- GG ( b, c, d, a, in[ 4], S24, UL(3889429448)); /* 24 */
- GG ( a, b, c, d, in[ 9], S21, UL( 568446438)); /* 25 */
- GG ( d, a, b, c, in[14], S22, UL(3275163606)); /* 26 */
- GG ( c, d, a, b, in[ 3], S23, UL(4107603335)); /* 27 */
- GG ( b, c, d, a, in[ 8], S24, UL(1163531501)); /* 28 */
- GG ( a, b, c, d, in[13], S21, UL(2850285829)); /* 29 */
- GG ( d, a, b, c, in[ 2], S22, UL(4243563512)); /* 30 */
- GG ( c, d, a, b, in[ 7], S23, UL(1735328473)); /* 31 */
- GG ( b, c, d, a, in[12], S24, UL(2368359562)); /* 32 */
-
- /* Round 3 */
-#define S31 4
-#define S32 11
-#define S33 16
-#define S34 23
- HH ( a, b, c, d, in[ 5], S31, UL(4294588738)); /* 33 */
- HH ( d, a, b, c, in[ 8], S32, UL(2272392833)); /* 34 */
- HH ( c, d, a, b, in[11], S33, UL(1839030562)); /* 35 */
- HH ( b, c, d, a, in[14], S34, UL(4259657740)); /* 36 */
- HH ( a, b, c, d, in[ 1], S31, UL(2763975236)); /* 37 */
- HH ( d, a, b, c, in[ 4], S32, UL(1272893353)); /* 38 */
- HH ( c, d, a, b, in[ 7], S33, UL(4139469664)); /* 39 */
- HH ( b, c, d, a, in[10], S34, UL(3200236656)); /* 40 */
- HH ( a, b, c, d, in[13], S31, UL( 681279174)); /* 41 */
- HH ( d, a, b, c, in[ 0], S32, UL(3936430074)); /* 42 */
- HH ( c, d, a, b, in[ 3], S33, UL(3572445317)); /* 43 */
- HH ( b, c, d, a, in[ 6], S34, UL( 76029189)); /* 44 */
- HH ( a, b, c, d, in[ 9], S31, UL(3654602809)); /* 45 */
- HH ( d, a, b, c, in[12], S32, UL(3873151461)); /* 46 */
- HH ( c, d, a, b, in[15], S33, UL( 530742520)); /* 47 */
- HH ( b, c, d, a, in[ 2], S34, UL(3299628645)); /* 48 */
-
- /* Round 4 */
-#define S41 6
-#define S42 10
-#define S43 15
-#define S44 21
- II ( a, b, c, d, in[ 0], S41, UL(4096336452)); /* 49 */
- II ( d, a, b, c, in[ 7], S42, UL(1126891415)); /* 50 */
- II ( c, d, a, b, in[14], S43, UL(2878612391)); /* 51 */
- II ( b, c, d, a, in[ 5], S44, UL(4237533241)); /* 52 */
- II ( a, b, c, d, in[12], S41, UL(1700485571)); /* 53 */
- II ( d, a, b, c, in[ 3], S42, UL(2399980690)); /* 54 */
- II ( c, d, a, b, in[10], S43, UL(4293915773)); /* 55 */
- II ( b, c, d, a, in[ 1], S44, UL(2240044497)); /* 56 */
- II ( a, b, c, d, in[ 8], S41, UL(1873313359)); /* 57 */
- II ( d, a, b, c, in[15], S42, UL(4264355552)); /* 58 */
- II ( c, d, a, b, in[ 6], S43, UL(2734768916)); /* 59 */
- II ( b, c, d, a, in[13], S44, UL(1309151649)); /* 60 */
- II ( a, b, c, d, in[ 4], S41, UL(4149444226)); /* 61 */
- II ( d, a, b, c, in[11], S42, UL(3174756917)); /* 62 */
- II ( c, d, a, b, in[ 2], S43, UL( 718787259)); /* 63 */
- II ( b, c, d, a, in[ 9], S44, UL(3951481745)); /* 64 */
-
- buf[0] += a;
- buf[1] += b;
- buf[2] += c;
- buf[3] += d;
-}
-
-/*
- ***********************************************************************
- ** End of md5.c **
- ******************************** (cut) ********************************
- */
diff --git a/mdk-stage1/ppp/pppd/md5.h b/mdk-stage1/ppp/pppd/md5.h
deleted file mode 100644
index 7492b2228..000000000
--- a/mdk-stage1/ppp/pppd/md5.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- ***********************************************************************
- ** md5.h -- header file for implementation of MD5 **
- ** RSA Data Security, Inc. MD5 Message-Digest Algorithm **
- ** Created: 2/17/90 RLR **
- ** Revised: 12/27/90 SRD,AJ,BSK,JT Reference C version **
- ** Revised (for MD5): RLR 4/27/91 **
- ** -- G modified to have y&~z instead of y&z **
- ** -- FF, GG, HH modified to add in last register done **
- ** -- Access pattern: round 2 works mod 5, round 3 works mod 3 **
- ** -- distinct additive constant for each step **
- ** -- round 4 added, working mod 7 **
- ***********************************************************************
- */
-
-/*
- ***********************************************************************
- ** Copyright (C) 1990, RSA Data Security, Inc. All rights reserved. **
- ** **
- ** License to copy and use this software is granted provided that **
- ** it is identified as the "RSA Data Security, Inc. MD5 Message- **
- ** Digest Algorithm" in all material mentioning or referencing this **
- ** software or this function. **
- ** **
- ** License is also granted to make and use derivative works **
- ** provided that such works are identified as "derived from the RSA **
- ** Data Security, Inc. MD5 Message-Digest Algorithm" in all **
- ** material mentioning or referencing the derived work. **
- ** **
- ** RSA Data Security, Inc. makes no representations concerning **
- ** either the merchantability of this software or the suitability **
- ** of this software for any particular purpose. It is provided "as **
- ** is" without express or implied warranty of any kind. **
- ** **
- ** These notices must be retained in any copies of any part of this **
- ** documentation and/or software. **
- ***********************************************************************
- */
-
-#ifndef __MD5_INCLUDE__
-
-/* typedef a 32-bit type */
-typedef unsigned int UINT4;
-
-/* Data structure for MD5 (Message-Digest) computation */
-typedef struct {
- UINT4 i[2]; /* number of _bits_ handled mod 2^64 */
- UINT4 buf[4]; /* scratch buffer */
- unsigned char in[64]; /* input buffer */
- unsigned char digest[16]; /* actual digest after MD5Final call */
-} MD5_CTX;
-
-void MD5Init ();
-void MD5Update ();
-void MD5Final ();
-
-#define __MD5_INCLUDE__
-#endif /* __MD5_INCLUDE__ */
diff --git a/mdk-stage1/ppp/pppd/multilink.c b/mdk-stage1/ppp/pppd/multilink.c
deleted file mode 100644
index c30b07e0a..000000000
--- a/mdk-stage1/ppp/pppd/multilink.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * multilink.c - support routines for multilink.
- *
- * Copyright (c) 2000 Paul Mackerras.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms. The name of the author may not be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <ctype.h>
-#include <netdb.h>
-#include <errno.h>
-#include <signal.h>
-#include <netinet/in.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "tdb.h"
-
-bool endpoint_specified; /* user gave explicit endpoint discriminator */
-char *bundle_id; /* identifier for our bundle */
-
-extern TDB_CONTEXT *pppdb;
-extern char db_key[];
-
-static int get_default_epdisc __P((struct epdisc *));
-static int parse_num __P((char *str, const char *key, int *valp));
-static int owns_unit __P((TDB_DATA pid, int unit));
-
-#define set_ip_epdisc(ep, addr) do { \
- ep->length = 4; \
- ep->value[0] = addr >> 24; \
- ep->value[1] = addr >> 16; \
- ep->value[2] = addr >> 8; \
- ep->value[3] = addr; \
-} while (0)
-
-#define LOCAL_IP_ADDR(addr) \
- (((addr) & 0xff000000) == 0x0a000000 /* 10.x.x.x */ \
- || ((addr) & 0xfff00000) == 0xac100000 /* 172.16.x.x */ \
- || ((addr) & 0xffff0000) == 0xc0a80000) /* 192.168.x.x */
-
-#define process_exists(n) (kill((n), 0) == 0 || errno != ESRCH)
-
-void
-mp_check_options()
-{
- lcp_options *wo = &lcp_wantoptions[0];
- lcp_options *ao = &lcp_allowoptions[0];
-
- if (!multilink)
- return;
- /* if we're doing multilink, we have to negotiate MRRU */
- if (!wo->neg_mrru) {
- /* mrru not specified, default to mru */
- wo->mrru = wo->mru;
- wo->neg_mrru = 1;
- }
- ao->mrru = ao->mru;
- ao->neg_mrru = 1;
-
- if (!wo->neg_endpoint && !noendpoint) {
- /* get a default endpoint value */
- wo->neg_endpoint = get_default_epdisc(&wo->endpoint);
- }
-}
-
-/*
- * Make a new bundle or join us to an existing bundle
- * if we are doing multilink.
- */
-int
-mp_join_bundle()
-{
- lcp_options *go = &lcp_gotoptions[0];
- lcp_options *ho = &lcp_hisoptions[0];
- lcp_options *ao = &lcp_allowoptions[0];
- int unit, pppd_pid;
- int l, mtu;
- char *p;
- TDB_DATA key, pid, rec;
-
- if (!go->neg_mrru || !ho->neg_mrru) {
- /* not doing multilink */
- if (go->neg_mrru)
- notice("oops, multilink negotiated only for receive");
- mtu = ho->neg_mru? ho->mru: PPP_MRU;
- if (mtu > ao->mru)
- mtu = ao->mru;
- if (demand) {
- /* already have a bundle */
- cfg_bundle(0, 0, 0, 0);
- netif_set_mtu(0, mtu);
- return 0;
- }
- make_new_bundle(0, 0, 0, 0);
- set_ifunit(1);
- netif_set_mtu(0, mtu);
- return 0;
- }
-
- /*
- * Find the appropriate bundle or join a new one.
- * First we make up a name for the bundle.
- * The length estimate is worst-case assuming every
- * character has to be quoted.
- */
- l = 4 * strlen(peer_authname) + 10;
- if (ho->neg_endpoint)
- l += 3 * ho->endpoint.length + 8;
- if (bundle_name)
- l += 3 * strlen(bundle_name) + 2;
- bundle_id = malloc(l);
- if (bundle_id == 0)
- novm("bundle identifier");
-
- p = bundle_id;
- p += slprintf(p, l-1, "BUNDLE=\"%q\"", peer_authname);
- if (ho->neg_endpoint || bundle_name)
- *p++ = '/';
- if (ho->neg_endpoint)
- p += slprintf(p, bundle_id+l-p, "%s",
- epdisc_to_str(&ho->endpoint));
- if (bundle_name)
- p += slprintf(p, bundle_id+l-p, "/%v", bundle_name);
-
- /*
- * For demand mode, we only need to configure the bundle
- * and attach the link.
- */
- mtu = MIN(ho->mrru, ao->mru);
- if (demand) {
- cfg_bundle(go->mrru, ho->mrru, go->neg_ssnhf, ho->neg_ssnhf);
- netif_set_mtu(0, mtu);
- script_setenv("BUNDLE", bundle_id + 7, 1);
- return 0;
- }
-
- /*
- * Check if the bundle ID is already in the database.
- */
- unit = -1;
- tdb_writelock(pppdb);
- key.dptr = bundle_id;
- key.dsize = p - bundle_id;
- pid = tdb_fetch(pppdb, key);
- if (pid.dptr != NULL) {
- /* bundle ID exists, see if the pppd record exists */
- rec = tdb_fetch(pppdb, pid);
- if (rec.dptr != NULL) {
- /* it is, parse the interface number */
- parse_num(rec.dptr, "IFNAME=ppp", &unit);
- /* check the pid value */
- if (!parse_num(rec.dptr, "PPPD_PID=", &pppd_pid)
- || !process_exists(pppd_pid)
- || !owns_unit(pid, unit))
- unit = -1;
- free(rec.dptr);
- }
- free(pid.dptr);
- }
-
- if (unit >= 0) {
- /* attach to existing unit */
- if (bundle_attach(unit)) {
- set_ifunit(0);
- script_setenv("BUNDLE", bundle_id + 7, 0);
- tdb_writeunlock(pppdb);
- info("Link attached to %s", ifname);
- return 1;
- }
- /* attach failed because bundle doesn't exist */
- }
-
- /* we have to make a new bundle */
- make_new_bundle(go->mrru, ho->mrru, go->neg_ssnhf, ho->neg_ssnhf);
- set_ifunit(1);
- netif_set_mtu(0, mtu);
- script_setenv("BUNDLE", bundle_id + 7, 1);
- tdb_writeunlock(pppdb);
- info("New bundle %s created", ifname);
- return 0;
-}
-
-static int
-parse_num(str, key, valp)
- char *str;
- const char *key;
- int *valp;
-{
- char *p, *endp;
- int i;
-
- p = strstr(str, key);
- if (p != 0) {
- p += strlen(key);
- i = strtol(p, &endp, 10);
- if (endp != p && (*endp == 0 || *endp == ';')) {
- *valp = i;
- return 1;
- }
- }
- return 0;
-}
-
-/*
- * Check whether the pppd identified by `key' still owns ppp unit `unit'.
- */
-static int
-owns_unit(key, unit)
- TDB_DATA key;
- int unit;
-{
- char ifkey[32];
- TDB_DATA kd, vd;
- int ret = 0;
-
- slprintf(ifkey, sizeof(ifkey), "IFNAME=ppp%d", unit);
- kd.dptr = ifkey;
- kd.dsize = strlen(ifkey);
- vd = tdb_fetch(pppdb, kd);
- if (vd.dptr != NULL) {
- ret = vd.dsize == key.dsize
- && memcmp(vd.dptr, key.dptr, vd.dsize) == 0;
- free(vd.dptr);
- }
- return ret;
-}
-
-static int
-get_default_epdisc(ep)
- struct epdisc *ep;
-{
- char *p;
- struct hostent *hp;
- u_int32_t addr;
-
- /* First try for an ethernet MAC address */
- p = get_first_ethernet();
- if (p != 0 && get_if_hwaddr(ep->value, p) >= 0) {
- ep->class = EPD_MAC;
- ep->length = 6;
- return 1;
- }
-
- /* see if our hostname corresponds to a reasonable IP address */
- hp = gethostbyname(hostname);
- if (hp != NULL) {
- addr = *(u_int32_t *)hp->h_addr;
- if (!bad_ip_adrs(addr)) {
- addr = ntohl(addr);
- if (!LOCAL_IP_ADDR(addr)) {
- ep->class = EPD_IP;
- set_ip_epdisc(ep, addr);
- return 1;
- }
- }
- }
-
- return 0;
-}
-
-/*
- * epdisc_to_str - make a printable string from an endpoint discriminator.
- */
-
-static char *endp_class_names[] = {
- "null", "local", "IP", "MAC", "magic", "phone"
-};
-
-char *
-epdisc_to_str(ep)
- struct epdisc *ep;
-{
- static char str[MAX_ENDP_LEN*3+8];
- u_char *p = ep->value;
- int i, mask = 0;
- char *q, c, c2;
-
- if (ep->class == EPD_NULL && ep->length == 0)
- return "null";
- if (ep->class == EPD_IP && ep->length == 4) {
- u_int32_t addr;
-
- GETLONG(addr, p);
- slprintf(str, sizeof(str), "IP:%I", htonl(addr));
- return str;
- }
-
- c = ':';
- c2 = '.';
- if (ep->class == EPD_MAC && ep->length == 6)
- c2 = ':';
- else if (ep->class == EPD_MAGIC && (ep->length % 4) == 0)
- mask = 3;
- q = str;
- if (ep->class <= EPD_PHONENUM)
- q += slprintf(q, sizeof(str)-1, "%s",
- endp_class_names[ep->class]);
- else
- q += slprintf(q, sizeof(str)-1, "%d", ep->class);
- c = ':';
- for (i = 0; i < ep->length && i < MAX_ENDP_LEN; ++i) {
- if ((i & mask) == 0) {
- *q++ = c;
- c = c2;
- }
- q += slprintf(q, str + sizeof(str) - q, "%.2x", ep->value[i]);
- }
- return str;
-}
-
-static int hexc_val(int c)
-{
- if (c >= 'a')
- return c - 'a' + 10;
- if (c >= 'A')
- return c - 'A' + 10;
- return c - '0';
-}
-
-int
-str_to_epdisc(ep, str)
- struct epdisc *ep;
- char *str;
-{
- int i, l;
- char *p, *endp;
-
- for (i = EPD_NULL; i <= EPD_PHONENUM; ++i) {
- int sl = strlen(endp_class_names[i]);
- if (strncasecmp(str, endp_class_names[i], sl) == 0) {
- str += sl;
- break;
- }
- }
- if (i > EPD_PHONENUM) {
- /* not a class name, try a decimal class number */
- i = strtol(str, &endp, 10);
- if (endp == str)
- return 0; /* can't parse class number */
- str = endp;
- }
- ep->class = i;
- if (*str == 0) {
- ep->length = 0;
- return 1;
- }
- if (*str != ':' && *str != '.')
- return 0;
- ++str;
-
- if (i == EPD_IP) {
- u_int32_t addr;
- i = parse_dotted_ip(str, &addr);
- if (i == 0 || str[i] != 0)
- return 0;
- set_ip_epdisc(ep, addr);
- return 1;
- }
- if (i == EPD_MAC && get_if_hwaddr(ep->value, str) >= 0) {
- ep->length = 6;
- return 1;
- }
-
- p = str;
- for (l = 0; l < MAX_ENDP_LEN; ++l) {
- if (*str == 0)
- break;
- if (p <= str)
- for (p = str; isxdigit(*p); ++p)
- ;
- i = p - str;
- if (i == 0)
- return 0;
- ep->value[l] = hexc_val(*str++);
- if ((i & 1) == 0)
- ep->value[l] = (ep->value[l] << 4) + hexc_val(*str++);
- if (*str == ':' || *str == '.')
- ++str;
- }
- if (*str != 0 || (ep->class == EPD_MAC && l != 6))
- return 0;
- ep->length = l;
- return 1;
-}
-
diff --git a/mdk-stage1/ppp/pppd/options.c b/mdk-stage1/ppp/pppd/options.c
deleted file mode 100644
index 1921d9ec5..000000000
--- a/mdk-stage1/ppp/pppd/options.c
+++ /dev/null
@@ -1,1513 +0,0 @@
-/*
- * options.c - handles option processing for PPP.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-#include <ctype.h>
-#include <stdio.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <string.h>
-#include <pwd.h>
-#ifdef PLUGIN
-#include <dlfcn.h>
-#endif
-#ifdef PPP_FILTER
-#include <pcap.h>
-#include <pcap-int.h> /* XXX: To get struct pcap */
-#endif
-
-#include "pppd.h"
-#include "pathnames.h"
-
-#if defined(ultrix) || defined(NeXT)
-char *strdup __P((char *));
-#endif
-
-static const char rcsid[] = RCSID;
-
-struct option_value {
- struct option_value *next;
- const char *source;
- char value[1];
-};
-
-/*
- * Option variables and default values.
- */
-#ifdef PPP_FILTER
-int dflag = 0; /* Tell libpcap we want debugging */
-#endif
-int debug = 0; /* Debug flag */
-int kdebugflag = 0; /* Tell kernel to print debug messages */
-int default_device = 1; /* Using /dev/tty or equivalent */
-char devnam[MAXPATHLEN]; /* Device name */
-bool nodetach = 0; /* Don't detach from controlling tty */
-bool updetach = 0; /* Detach once link is up */
-int maxconnect = 0; /* Maximum connect time */
-char user[MAXNAMELEN]; /* Username for PAP */
-char passwd[MAXSECRETLEN]; /* Password for PAP */
-bool persist = 0; /* Reopen link after it goes down */
-char our_name[MAXNAMELEN]; /* Our name for authentication purposes */
-bool demand = 0; /* do dial-on-demand */
-char *ipparam = NULL; /* Extra parameter for ip up/down scripts */
-int idle_time_limit = 0; /* Disconnect if idle for this many seconds */
-int holdoff = 30; /* # seconds to pause before reconnecting */
-bool holdoff_specified; /* true if a holdoff value has been given */
-int log_to_fd = 1; /* send log messages to this fd too */
-bool log_default = 1; /* log_to_fd is default (stdout) */
-int maxfail = 10; /* max # of unsuccessful connection attempts */
-char linkname[MAXPATHLEN]; /* logical name for link */
-bool tune_kernel; /* may alter kernel settings */
-int connect_delay = 1000; /* wait this many ms after connect script */
-int req_unit = -1; /* requested interface unit */
-bool multilink = 0; /* Enable multilink operation */
-char *bundle_name = NULL; /* bundle name for multilink */
-bool dump_options; /* print out option values */
-bool dryrun; /* print out option values and exit */
-char *domain; /* domain name set by domain option */
-
-extern option_t auth_options[];
-extern struct stat devstat;
-
-#ifdef PPP_FILTER
-struct bpf_program pass_filter;/* Filter program for packets to pass */
-struct bpf_program active_filter; /* Filter program for link-active pkts */
-pcap_t pc; /* Fake struct pcap so we can compile expr */
-#endif
-
-char *current_option; /* the name of the option being parsed */
-int privileged_option; /* set iff the current option came from root */
-char *option_source; /* string saying where the option came from */
-int option_priority = OPRIO_CFGFILE; /* priority of the current options */
-bool devnam_fixed; /* can no longer change device name */
-
-static int logfile_fd = -1; /* fd opened for log file */
-static char logfile_name[MAXPATHLEN]; /* name of log file */
-
-/*
- * Prototypes
- */
-static int setdomain __P((char **));
-static int readfile __P((char **));
-static int callfile __P((char **));
-static int showversion __P((char **));
-static int showhelp __P((char **));
-static void usage __P((void));
-static int setlogfile __P((char **));
-#ifdef PLUGIN
-static int loadplugin __P((char **));
-#endif
-
-#ifdef PPP_FILTER
-static int setpassfilter __P((char **));
-static int setactivefilter __P((char **));
-#endif
-
-static option_t *find_option __P((const char *name));
-static int process_option __P((option_t *, char *, char **));
-static int n_arguments __P((option_t *));
-static int number_option __P((char *, u_int32_t *, int));
-
-/*
- * Structure to store extra lists of options.
- */
-struct option_list {
- option_t *options;
- struct option_list *next;
-};
-
-static struct option_list *extra_options = NULL;
-
-/*
- * Valid arguments.
- */
-option_t general_options[] = {
- { "debug", o_int, &debug,
- "Increase debugging level", OPT_INC | OPT_NOARG | 1 },
- { "-d", o_int, &debug,
- "Increase debugging level",
- OPT_ALIAS | OPT_INC | OPT_NOARG | 1 },
-
- { "kdebug", o_int, &kdebugflag,
- "Set kernel driver debug level", OPT_PRIO },
-
- { "nodetach", o_bool, &nodetach,
- "Don't detach from controlling tty", OPT_PRIO | 1 },
- { "-detach", o_bool, &nodetach,
- "Don't detach from controlling tty", OPT_ALIAS | OPT_PRIOSUB | 1 },
- { "updetach", o_bool, &updetach,
- "Detach from controlling tty once link is up",
- OPT_PRIOSUB | OPT_A2CLR | 1, &nodetach },
-
- { "holdoff", o_int, &holdoff,
- "Set time in seconds before retrying connection", OPT_PRIO },
-
- { "idle", o_int, &idle_time_limit,
- "Set time in seconds before disconnecting idle link", OPT_PRIO },
-
- { "maxconnect", o_int, &maxconnect,
- "Set connection time limit",
- OPT_PRIO | OPT_LLIMIT | OPT_NOINCR | OPT_ZEROINF },
-
- { "domain", o_special, (void *)setdomain,
- "Add given domain name to hostname",
- OPT_PRIO | OPT_PRIV | OPT_A2STRVAL, &domain },
-
- { "file", o_special, (void *)readfile,
- "Take options from a file", OPT_NOPRINT },
- { "call", o_special, (void *)callfile,
- "Take options from a privileged file", OPT_NOPRINT },
-
- { "persist", o_bool, &persist,
- "Keep on reopening connection after close", OPT_PRIO | 1 },
- { "nopersist", o_bool, &persist,
- "Turn off persist option", OPT_PRIOSUB },
-
- { "demand", o_bool, &demand,
- "Dial on demand", OPT_INITONLY | 1, &persist },
-
- { "--version", o_special_noarg, (void *)showversion,
- "Show version number" },
- { "--help", o_special_noarg, (void *)showhelp,
- "Show brief listing of options" },
- { "-h", o_special_noarg, (void *)showhelp,
- "Show brief listing of options", OPT_ALIAS },
-
- { "logfile", o_special, (void *)setlogfile,
- "Append log messages to this file",
- OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, &logfile_name },
- { "logfd", o_int, &log_to_fd,
- "Send log messages to this file descriptor",
- OPT_PRIOSUB | OPT_A2CLR, &log_default },
- { "nolog", o_int, &log_to_fd,
- "Don't send log messages to any file",
- OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) },
- { "nologfd", o_int, &log_to_fd,
- "Don't send log messages to any file descriptor",
- OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
-
- { "linkname", o_string, linkname,
- "Set logical name for link",
- OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXPATHLEN },
-
- { "maxfail", o_int, &maxfail,
- "Maximum number of unsuccessful connection attempts to allow",
- OPT_PRIO },
-
- { "ktune", o_bool, &tune_kernel,
- "Alter kernel settings as necessary", OPT_PRIO | 1 },
- { "noktune", o_bool, &tune_kernel,
- "Don't alter kernel settings", OPT_PRIOSUB },
-
- { "connect-delay", o_int, &connect_delay,
- "Maximum time (in ms) to wait after connect script finishes",
- OPT_PRIO },
-
- { "unit", o_int, &req_unit,
- "PPP interface unit number to use if possible",
- OPT_PRIO | OPT_LLIMIT, 0, 0 },
-
- { "dump", o_bool, &dump_options,
- "Print out option values after parsing all options", 1 },
- { "dryrun", o_bool, &dryrun,
- "Stop after parsing, printing, and checking options", 1 },
-
-#ifdef HAVE_MULTILINK
- { "multilink", o_bool, &multilink,
- "Enable multilink operation", OPT_PRIO | 1 },
- { "mp", o_bool, &multilink,
- "Enable multilink operation", OPT_PRIOSUB | OPT_ALIAS | 1 },
- { "nomultilink", o_bool, &multilink,
- "Disable multilink operation", OPT_PRIOSUB | 0 },
- { "nomp", o_bool, &multilink,
- "Disable multilink operation", OPT_PRIOSUB | OPT_ALIAS | 0 },
-
- { "bundle", o_string, &bundle_name,
- "Bundle name for multilink", OPT_PRIO },
-#endif /* HAVE_MULTILINK */
-
-#ifdef PLUGIN
- { "plugin", o_special, (void *)loadplugin,
- "Load a plug-in module into pppd", OPT_PRIV | OPT_A2LIST },
-#endif
-
-#ifdef PPP_FILTER
- { "pdebug", o_int, &dflag,
- "libpcap debugging", OPT_PRIO },
-
- { "pass-filter", 1, setpassfilter,
- "set filter for packets to pass", OPT_PRIO },
-
- { "active-filter", 1, setactivefilter,
- "set filter for active pkts", OPT_PRIO },
-#endif
-
- { NULL }
-};
-
-#ifndef IMPLEMENTATION
-#define IMPLEMENTATION ""
-#endif
-
-static char *usage_string = "\
-pppd version %s\n\
-Usage: %s [ options ], where options are:\n\
- <device> Communicate over the named device\n\
- <speed> Set the baud rate to <speed>\n\
- <loc>:<rem> Set the local and/or remote interface IP\n\
- addresses. Either one may be omitted.\n\
- asyncmap <n> Set the desired async map to hex <n>\n\
- auth Require authentication from peer\n\
- connect <p> Invoke shell command <p> to set up the serial line\n\
- crtscts Use hardware RTS/CTS flow control\n\
- defaultroute Add default route through interface\n\
- file <f> Take options from file <f>\n\
- modem Use modem control lines\n\
- mru <n> Set MRU value to <n> for negotiation\n\
-See pppd(8) for more options.\n\
-";
-
-/*
- * parse_args - parse a string of arguments from the command line.
- */
-int
-parse_args(argc, argv)
- int argc;
- char **argv;
-{
- char *arg;
- option_t *opt;
- int n;
-
- privileged_option = privileged;
- option_source = "command line";
- option_priority = OPRIO_CMDLINE;
- while (argc > 0) {
- arg = *argv++;
- --argc;
- opt = find_option(arg);
- if (opt == NULL) {
- option_error("unrecognized option '%s'", arg);
- usage();
- return 0;
- }
- n = n_arguments(opt);
- if (argc < n) {
- option_error("too few parameters for option %s", arg);
- return 0;
- }
- if (!process_option(opt, arg, argv))
- return 0;
- argc -= n;
- argv += n;
- }
- return 1;
-}
-
-/*
- * options_from_file - Read a string of options from a file,
- * and interpret them.
- */
-int
-options_from_file(filename, must_exist, check_prot, priv)
- char *filename;
- int must_exist;
- int check_prot;
- int priv;
-{
- FILE *f;
- int i, newline, ret, err;
- option_t *opt;
- int oldpriv, n;
- char *oldsource;
- char *argv[MAXARGS];
- char args[MAXARGS][MAXWORDLEN];
- char cmd[MAXWORDLEN];
-
- if (check_prot)
- seteuid(getuid());
- f = fopen(filename, "r");
- err = errno;
- if (check_prot)
- seteuid(0);
- if (f == NULL) {
- errno = err;
- if (!must_exist) {
- if (err != ENOENT && err != ENOTDIR)
- warn("Warning: can't open options file %s: %m", filename);
- return 1;
- }
- option_error("Can't open options file %s: %m", filename);
- return 0;
- }
-
- oldpriv = privileged_option;
- privileged_option = priv;
- oldsource = option_source;
- option_source = strdup(filename);
- if (option_source == NULL)
- option_source = "file";
- ret = 0;
- while (getword(f, cmd, &newline, filename)) {
- opt = find_option(cmd);
- if (opt == NULL) {
- option_error("In file %s: unrecognized option '%s'",
- filename, cmd);
- goto err;
- }
- n = n_arguments(opt);
- for (i = 0; i < n; ++i) {
- if (!getword(f, args[i], &newline, filename)) {
- option_error(
- "In file %s: too few parameters for option '%s'",
- filename, cmd);
- goto err;
- }
- argv[i] = args[i];
- }
- if (!process_option(opt, cmd, argv))
- goto err;
- }
- ret = 1;
-
-err:
- fclose(f);
- privileged_option = oldpriv;
- option_source = oldsource;
- return ret;
-}
-
-/*
- * options_from_user - See if the use has a ~/.ppprc file,
- * and if so, interpret options from it.
- */
-int
-options_from_user()
-{
- char *user, *path, *file;
- int ret;
- struct passwd *pw;
- size_t pl;
-
- pw = getpwuid(getuid());
- if (pw == NULL || (user = pw->pw_dir) == NULL || user[0] == 0)
- return 1;
- file = _PATH_USEROPT;
- pl = strlen(user) + strlen(file) + 2;
- path = malloc(pl);
- if (path == NULL)
- novm("init file name");
- slprintf(path, pl, "%s/%s", user, file);
- option_priority = OPRIO_CFGFILE;
- ret = options_from_file(path, 0, 1, privileged);
- free(path);
- return ret;
-}
-
-/*
- * options_for_tty - See if an options file exists for the serial
- * device, and if so, interpret options from it.
- * We only allow the per-tty options file to override anything from
- * the command line if it is something that the user can't override
- * once it has been set by root; this is done by giving configuration
- * files a lower priority than the command line.
- */
-int
-options_for_tty()
-{
- char *dev, *path, *p;
- int ret;
- size_t pl;
-
- dev = devnam;
- if (strncmp(dev, "/dev/", 5) == 0)
- dev += 5;
- if (dev[0] == 0 || strcmp(dev, "tty") == 0)
- return 1; /* don't look for /etc/ppp/options.tty */
- pl = strlen(_PATH_TTYOPT) + strlen(dev) + 1;
- path = malloc(pl);
- if (path == NULL)
- novm("tty init file name");
- slprintf(path, pl, "%s%s", _PATH_TTYOPT, dev);
- /* Turn slashes into dots, for Solaris case (e.g. /dev/term/a) */
- for (p = path + strlen(_PATH_TTYOPT); *p != 0; ++p)
- if (*p == '/')
- *p = '.';
- option_priority = OPRIO_CFGFILE;
- ret = options_from_file(path, 0, 0, 1);
- free(path);
- return ret;
-}
-
-/*
- * options_from_list - process a string of options in a wordlist.
- */
-int
-options_from_list(w, priv)
- struct wordlist *w;
- int priv;
-{
- char *argv[MAXARGS];
- option_t *opt;
- int i, n, ret = 0;
- struct wordlist *w0;
-
- privileged_option = priv;
- option_source = "secrets file";
- option_priority = OPRIO_SECFILE;
-
- while (w != NULL) {
- opt = find_option(w->word);
- if (opt == NULL) {
- option_error("In secrets file: unrecognized option '%s'",
- w->word);
- goto err;
- }
- n = n_arguments(opt);
- w0 = w;
- for (i = 0; i < n; ++i) {
- w = w->next;
- if (w == NULL) {
- option_error(
- "In secrets file: too few parameters for option '%s'",
- w0->word);
- goto err;
- }
- argv[i] = w->word;
- }
- if (!process_option(opt, w0->word, argv))
- goto err;
- w = w->next;
- }
- ret = 1;
-
-err:
- return ret;
-}
-
-/*
- * match_option - see if this option matches an option_t structure.
- */
-static int
-match_option(name, opt, dowild)
- char *name;
- option_t *opt;
- int dowild;
-{
- int (*match) __P((char *, char **, int));
-
- if (dowild != (opt->type == o_wild))
- return 0;
- if (!dowild)
- return strcmp(name, opt->name) == 0;
- match = (int (*) __P((char *, char **, int))) opt->addr;
- return (*match)(name, NULL, 0);
-}
-
-/*
- * find_option - scan the option lists for the various protocols
- * looking for an entry with the given name.
- * This could be optimized by using a hash table.
- */
-static option_t *
-find_option(name)
- const char *name;
-{
- option_t *opt;
- struct option_list *list;
- int i, dowild;
-
- for (dowild = 0; dowild <= 1; ++dowild) {
- for (opt = general_options; opt->name != NULL; ++opt)
- if (match_option(name, opt, dowild))
- return opt;
- for (opt = auth_options; opt->name != NULL; ++opt)
- if (match_option(name, opt, dowild))
- return opt;
- for (list = extra_options; list != NULL; list = list->next)
- for (opt = list->options; opt->name != NULL; ++opt)
- if (match_option(name, opt, dowild))
- return opt;
- for (opt = the_channel->options; opt->name != NULL; ++opt)
- if (match_option(name, opt, dowild))
- return opt;
- for (i = 0; protocols[i] != NULL; ++i)
- if ((opt = protocols[i]->options) != NULL)
- for (; opt->name != NULL; ++opt)
- if (match_option(name, opt, dowild))
- return opt;
- }
- return NULL;
-}
-
-/*
- * process_option - process one new-style option.
- */
-static int
-process_option(opt, cmd, argv)
- option_t *opt;
- char *cmd;
- char **argv;
-{
- u_int32_t v;
- int iv, a;
- char *sv;
- int (*parser) __P((char **));
- int (*wildp) __P((char *, char **, int));
- char *optopt = (opt->type == o_wild)? "": " option";
- int prio = option_priority;
- option_t *mainopt = opt;
-
- if ((opt->flags & OPT_PRIVFIX) && privileged_option)
- prio += OPRIO_ROOT;
- while (mainopt->flags & OPT_PRIOSUB)
- --mainopt;
- if (mainopt->flags & OPT_PRIO) {
- if (prio < mainopt->priority) {
- /* new value doesn't override old */
- if (prio == OPRIO_CMDLINE && mainopt->priority > OPRIO_ROOT) {
- option_error("%s%s set in %s cannot be overridden\n",
- opt->name, optopt, mainopt->source);
- return 0;
- }
- return 1;
- }
- if (prio > OPRIO_ROOT && mainopt->priority == OPRIO_CMDLINE)
- warn("%s%s from %s overrides command line",
- opt->name, optopt, option_source);
- }
-
- if ((opt->flags & OPT_INITONLY) && phase != PHASE_INITIALIZE) {
- option_error("%s%s cannot be changed after initialization",
- opt->name, optopt);
- return 0;
- }
- if ((opt->flags & OPT_PRIV) && !privileged_option) {
- option_error("using the %s%s requires root privilege",
- opt->name, optopt);
- return 0;
- }
- if ((opt->flags & OPT_ENABLE) && *(bool *)(opt->addr2) == 0) {
- option_error("%s%s is disabled", opt->name, optopt);
- return 0;
- }
- if ((opt->flags & OPT_DEVEQUIV) && devnam_fixed) {
- option_error("the %s%s may not be changed in %s",
- opt->name, optopt, option_source);
- return 0;
- }
-
- switch (opt->type) {
- case o_bool:
- v = opt->flags & OPT_VALUE;
- *(bool *)(opt->addr) = v;
- if (opt->addr2 && (opt->flags & OPT_A2COPY))
- *(bool *)(opt->addr2) = v;
- break;
-
- case o_int:
- iv = 0;
- if ((opt->flags & OPT_NOARG) == 0) {
- if (!int_option(*argv, &iv))
- return 0;
- if ((((opt->flags & OPT_LLIMIT) && iv < opt->lower_limit)
- || ((opt->flags & OPT_ULIMIT) && iv > opt->upper_limit))
- && !((opt->flags & OPT_ZEROOK && iv == 0))) {
- char *zok = (opt->flags & OPT_ZEROOK)? " zero or": "";
- switch (opt->flags & OPT_LIMITS) {
- case OPT_LLIMIT:
- option_error("%s value must be%s >= %d",
- opt->name, zok, opt->lower_limit);
- break;
- case OPT_ULIMIT:
- option_error("%s value must be%s <= %d",
- opt->name, zok, opt->upper_limit);
- break;
- case OPT_LIMITS:
- option_error("%s value must be%s between %d and %d",
- opt->name, opt->lower_limit, opt->upper_limit);
- break;
- }
- return 0;
- }
- }
- a = opt->flags & OPT_VALUE;
- if (a >= 128)
- a -= 256; /* sign extend */
- iv += a;
- if (opt->flags & OPT_INC)
- iv += *(int *)(opt->addr);
- if ((opt->flags & OPT_NOINCR) && !privileged_option) {
- int oldv = *(int *)(opt->addr);
- if ((opt->flags & OPT_ZEROINF) ?
- (oldv != 0 && (iv == 0 || iv > oldv)) : (iv > oldv)) {
- option_error("%s value cannot be increased", opt->name);
- return 0;
- }
- }
- *(int *)(opt->addr) = iv;
- if (opt->addr2 && (opt->flags & OPT_A2COPY))
- *(int *)(opt->addr2) = iv;
- break;
-
- case o_uint32:
- if (opt->flags & OPT_NOARG) {
- v = opt->flags & OPT_VALUE;
- if (v & 0x80)
- v |= 0xffffff00U;
- } else if (!number_option(*argv, &v, 16))
- return 0;
- if (opt->flags & OPT_OR)
- v |= *(u_int32_t *)(opt->addr);
- *(u_int32_t *)(opt->addr) = v;
- if (opt->addr2 && (opt->flags & OPT_A2COPY))
- *(u_int32_t *)(opt->addr2) = v;
- break;
-
- case o_string:
- if (opt->flags & OPT_STATIC) {
- strlcpy((char *)(opt->addr), *argv, opt->upper_limit);
- } else {
- sv = strdup(*argv);
- if (sv == NULL)
- novm("option argument");
- *(char **)(opt->addr) = sv;
- }
- break;
-
- case o_special_noarg:
- case o_special:
- parser = (int (*) __P((char **))) opt->addr;
- if (!(*parser)(argv))
- return 0;
- if (opt->flags & OPT_A2LIST) {
- struct option_value *ovp, **pp;
-
- ovp = malloc(sizeof(*ovp) + strlen(*argv));
- if (ovp != 0) {
- strcpy(ovp->value, *argv);
- ovp->source = option_source;
- ovp->next = NULL;
- pp = (struct option_value **) &opt->addr2;
- while (*pp != 0)
- pp = &(*pp)->next;
- *pp = ovp;
- }
- }
- break;
-
- case o_wild:
- wildp = (int (*) __P((char *, char **, int))) opt->addr;
- if (!(*wildp)(cmd, argv, 1))
- return 0;
- break;
- }
-
- if (opt->addr2 && (opt->flags & (OPT_A2COPY|OPT_ENABLE
- |OPT_A2PRINTER|OPT_A2STRVAL|OPT_A2LIST)) == 0)
- *(bool *)(opt->addr2) = !(opt->flags & OPT_A2CLR);
-
- mainopt->source = option_source;
- mainopt->priority = prio;
- mainopt->winner = opt - mainopt;
-
- return 1;
-}
-
-/*
- * override_value - if the option priorities would permit us to
- * override the value of option, return 1 and update the priority
- * and source of the option value. Otherwise returns 0.
- */
-int
-override_value(option, priority, source)
- const char *option;
- int priority;
- const char *source;
-{
- option_t *opt;
-
- opt = find_option(option);
- if (opt == NULL)
- return 0;
- while (opt->flags & OPT_PRIOSUB)
- --opt;
- if ((opt->flags & OPT_PRIO) && priority < opt->priority)
- return 0;
- opt->priority = priority;
- opt->source = source;
- opt->winner = -1;
- return 1;
-}
-
-/*
- * n_arguments - tell how many arguments an option takes
- */
-static int
-n_arguments(opt)
- option_t *opt;
-{
- return (opt->type == o_bool || opt->type == o_special_noarg
- || (opt->flags & OPT_NOARG))? 0: 1;
-}
-
-/*
- * add_options - add a list of options to the set we grok.
- */
-void
-add_options(opt)
- option_t *opt;
-{
- struct option_list *list;
-
- list = malloc(sizeof(*list));
- if (list == 0)
- novm("option list entry");
- list->options = opt;
- list->next = extra_options;
- extra_options = list;
-}
-
-/*
- * check_options - check that options are valid and consistent.
- */
-void
-check_options()
-{
- if (logfile_fd >= 0 && logfile_fd != log_to_fd)
- close(logfile_fd);
-}
-
-/*
- * print_option - print out an option and its value
- */
-static void
-print_option(opt, mainopt, printer, arg)
- option_t *opt, *mainopt;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int i, v;
- char *p;
-
- if (opt->flags & OPT_NOPRINT)
- return;
- switch (opt->type) {
- case o_bool:
- v = opt->flags & OPT_VALUE;
- if (*(bool *)opt->addr != v)
- /* this can happen legitimately, e.g. lock
- option turned off for default device */
- break;
- printer(arg, "%s", opt->name);
- break;
- case o_int:
- v = opt->flags & OPT_VALUE;
- if (v >= 128)
- v -= 256;
- i = *(int *)opt->addr;
- if (opt->flags & OPT_NOARG) {
- printer(arg, "%s", opt->name);
- if (i != v) {
- if (opt->flags & OPT_INC) {
- for (; i > v; i -= v)
- printer(arg, " %s", opt->name);
- } else
- printer(arg, " # oops: %d not %d\n",
- i, v);
- }
- } else {
- printer(arg, "%s %d", opt->name, i);
- }
- break;
- case o_uint32:
- printer(arg, "%s", opt->name);
- if ((opt->flags & OPT_NOARG) == 0)
- printer(arg, " %x", *(u_int32_t *)opt->addr);
- break;
-
- case o_string:
- if (opt->flags & OPT_HIDE) {
- p = "??????";
- } else {
- p = (char *) opt->addr;
- if ((opt->flags & OPT_STATIC) == 0)
- p = *(char **)p;
- }
- printer(arg, "%s %q", opt->name, p);
- break;
-
- case o_special:
- case o_special_noarg:
- case o_wild:
- if (opt->type != o_wild) {
- printer(arg, "%s", opt->name);
- if (n_arguments(opt) == 0)
- break;
- printer(arg, " ");
- }
- if (opt->flags & OPT_A2PRINTER) {
- void (*oprt) __P((option_t *,
- void ((*)__P((void *, char *, ...))),
- void *));
- oprt = opt->addr2;
- (*oprt)(opt, printer, arg);
- } else if (opt->flags & OPT_A2STRVAL) {
- p = (char *) opt->addr2;
- if ((opt->flags & OPT_STATIC) == 0)
- p = *(char **)p;
- printer("%q", p);
- } else if (opt->flags & OPT_A2LIST) {
- struct option_value *ovp;
-
- ovp = (struct option_value *) opt->addr2;
- for (;;) {
- printer(arg, "%q", ovp->value);
- if ((ovp = ovp->next) == NULL)
- break;
- printer(arg, "\t\t# (from %s)\n%s ",
- ovp->source, opt->name);
- }
- } else {
- printer(arg, "xxx # [don't know how to print value]");
- }
- break;
-
- default:
- printer(arg, "# %s value (type %d)", opt->name, opt->type);
- break;
- }
- printer(arg, "\t\t# (from %s)\n", mainopt->source);
-}
-
-/*
- * print_option_list - print out options in effect from an
- * array of options.
- */
-static void
-print_option_list(opt, printer, arg)
- option_t *opt;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- while (opt->name != NULL) {
- if (opt->priority != OPRIO_DEFAULT
- && opt->winner != (short int) -1)
- print_option(opt + opt->winner, opt, printer, arg);
- do {
- ++opt;
- } while (opt->flags & OPT_PRIOSUB);
- }
-}
-
-/*
- * print_options - print out what options are in effect.
- */
-void
-print_options(printer, arg)
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- struct option_list *list;
- int i;
-
- printer(arg, "pppd options in effect:\n");
- print_option_list(general_options, printer, arg);
- print_option_list(auth_options, printer, arg);
- for (list = extra_options; list != NULL; list = list->next)
- print_option_list(list->options, printer, arg);
- print_option_list(the_channel->options, printer, arg);
- for (i = 0; protocols[i] != NULL; ++i)
- print_option_list(protocols[i]->options, printer, arg);
-}
-
-/*
- * usage - print out a message telling how to use the program.
- */
-static void
-usage()
-{
- if (phase == PHASE_INITIALIZE)
- fprintf(stderr, usage_string, VERSION, progname);
-}
-
-/*
- * showhelp - print out usage message and exit.
- */
-static int
-showhelp(argv)
- char **argv;
-{
- if (phase == PHASE_INITIALIZE) {
- usage();
- exit(0);
- }
- return 0;
-}
-
-/*
- * showversion - print out the version number and exit.
- */
-static int
-showversion(argv)
- char **argv;
-{
- if (phase == PHASE_INITIALIZE) {
- fprintf(stderr, "pppd version %s\n", VERSION);
- exit(0);
- }
- return 0;
-}
-
-/*
- * option_error - print a message about an error in an option.
- * The message is logged, and also sent to
- * stderr if phase == PHASE_INITIALIZE.
- */
-void
-option_error __V((char *fmt, ...))
-{
- va_list args;
- char buf[1024];
-
-#if defined(__STDC__)
- va_start(args, fmt);
-#else
- char *fmt;
- va_start(args);
- fmt = va_arg(args, char *);
-#endif
- vslprintf(buf, sizeof(buf), fmt, args);
- va_end(args);
- if (phase == PHASE_INITIALIZE)
- fprintf(stderr, "%s: %s\n", progname, buf);
- syslog(LOG_ERR, "%s", buf);
-}
-
-#if 0
-/*
- * readable - check if a file is readable by the real user.
- */
-int
-readable(fd)
- int fd;
-{
- uid_t uid;
- int i;
- struct stat sbuf;
-
- uid = getuid();
- if (uid == 0)
- return 1;
- if (fstat(fd, &sbuf) != 0)
- return 0;
- if (sbuf.st_uid == uid)
- return sbuf.st_mode & S_IRUSR;
- if (sbuf.st_gid == getgid())
- return sbuf.st_mode & S_IRGRP;
- for (i = 0; i < ngroups; ++i)
- if (sbuf.st_gid == groups[i])
- return sbuf.st_mode & S_IRGRP;
- return sbuf.st_mode & S_IROTH;
-}
-#endif
-
-/*
- * Read a word from a file.
- * Words are delimited by white-space or by quotes (" or ').
- * Quotes, white-space and \ may be escaped with \.
- * \<newline> is ignored.
- */
-int
-getword(f, word, newlinep, filename)
- FILE *f;
- char *word;
- int *newlinep;
- char *filename;
-{
- int c, len, escape;
- int quoted, comment;
- int value, digit, got, n;
-
-#define isoctal(c) ((c) >= '0' && (c) < '8')
-
- *newlinep = 0;
- len = 0;
- escape = 0;
- comment = 0;
-
- /*
- * First skip white-space and comments.
- */
- for (;;) {
- c = getc(f);
- if (c == EOF)
- break;
-
- /*
- * A newline means the end of a comment; backslash-newline
- * is ignored. Note that we cannot have escape && comment.
- */
- if (c == '\n') {
- if (!escape) {
- *newlinep = 1;
- comment = 0;
- } else
- escape = 0;
- continue;
- }
-
- /*
- * Ignore characters other than newline in a comment.
- */
- if (comment)
- continue;
-
- /*
- * If this character is escaped, we have a word start.
- */
- if (escape)
- break;
-
- /*
- * If this is the escape character, look at the next character.
- */
- if (c == '\\') {
- escape = 1;
- continue;
- }
-
- /*
- * If this is the start of a comment, ignore the rest of the line.
- */
- if (c == '#') {
- comment = 1;
- continue;
- }
-
- /*
- * A non-whitespace character is the start of a word.
- */
- if (!isspace(c))
- break;
- }
-
- /*
- * Save the delimiter for quoted strings.
- */
- if (!escape && (c == '"' || c == '\'')) {
- quoted = c;
- c = getc(f);
- } else
- quoted = 0;
-
- /*
- * Process characters until the end of the word.
- */
- while (c != EOF) {
- if (escape) {
- /*
- * This character is escaped: backslash-newline is ignored,
- * various other characters indicate particular values
- * as for C backslash-escapes.
- */
- escape = 0;
- if (c == '\n') {
- c = getc(f);
- continue;
- }
-
- got = 0;
- switch (c) {
- case 'a':
- value = '\a';
- break;
- case 'b':
- value = '\b';
- break;
- case 'f':
- value = '\f';
- break;
- case 'n':
- value = '\n';
- break;
- case 'r':
- value = '\r';
- break;
- case 's':
- value = ' ';
- break;
- case 't':
- value = '\t';
- break;
-
- default:
- if (isoctal(c)) {
- /*
- * \ddd octal sequence
- */
- value = 0;
- for (n = 0; n < 3 && isoctal(c); ++n) {
- value = (value << 3) + (c & 07);
- c = getc(f);
- }
- got = 1;
- break;
- }
-
- if (c == 'x') {
- /*
- * \x<hex_string> sequence
- */
- value = 0;
- c = getc(f);
- for (n = 0; n < 2 && isxdigit(c); ++n) {
- digit = toupper(c) - '0';
- if (digit > 10)
- digit += '0' + 10 - 'A';
- value = (value << 4) + digit;
- c = getc (f);
- }
- got = 1;
- break;
- }
-
- /*
- * Otherwise the character stands for itself.
- */
- value = c;
- break;
- }
-
- /*
- * Store the resulting character for the escape sequence.
- */
- if (len < MAXWORDLEN-1)
- word[len] = value;
- ++len;
-
- if (!got)
- c = getc(f);
- continue;
-
- }
-
- /*
- * Not escaped: see if we've reached the end of the word.
- */
- if (quoted) {
- if (c == quoted)
- break;
- } else {
- if (isspace(c) || c == '#') {
- ungetc (c, f);
- break;
- }
- }
-
- /*
- * Backslash starts an escape sequence.
- */
- if (c == '\\') {
- escape = 1;
- c = getc(f);
- continue;
- }
-
- /*
- * An ordinary character: store it in the word and get another.
- */
- if (len < MAXWORDLEN-1)
- word[len] = c;
- ++len;
-
- c = getc(f);
- }
-
- /*
- * End of the word: check for errors.
- */
- if (c == EOF) {
- if (ferror(f)) {
- if (errno == 0)
- errno = EIO;
- option_error("Error reading %s: %m", filename);
- die(1);
- }
- /*
- * If len is zero, then we didn't find a word before the
- * end of the file.
- */
- if (len == 0)
- return 0;
- }
-
- /*
- * Warn if the word was too long, and append a terminating null.
- */
- if (len >= MAXWORDLEN) {
- option_error("warning: word in file %s too long (%.20s...)",
- filename, word);
- len = MAXWORDLEN - 1;
- }
- word[len] = 0;
-
- return 1;
-
-#undef isoctal
-
-}
-
-/*
- * number_option - parse an unsigned numeric parameter for an option.
- */
-static int
-number_option(str, valp, base)
- char *str;
- u_int32_t *valp;
- int base;
-{
- char *ptr;
-
- *valp = strtoul(str, &ptr, base);
- if (ptr == str) {
- option_error("invalid numeric parameter '%s' for %s option",
- str, current_option);
- return 0;
- }
- return 1;
-}
-
-
-/*
- * int_option - like number_option, but valp is int *,
- * the base is assumed to be 0, and *valp is not changed
- * if there is an error.
- */
-int
-int_option(str, valp)
- char *str;
- int *valp;
-{
- u_int32_t v;
-
- if (!number_option(str, &v, 0))
- return 0;
- *valp = (int) v;
- return 1;
-}
-
-
-/*
- * The following procedures parse options.
- */
-
-/*
- * readfile - take commands from a file.
- */
-static int
-readfile(argv)
- char **argv;
-{
- return options_from_file(*argv, 1, 1, privileged_option);
-}
-
-/*
- * callfile - take commands from /etc/ppp/peers/<name>.
- * Name may not contain /../, start with / or ../, or end in /..
- */
-static int
-callfile(argv)
- char **argv;
-{
- char *fname, *arg, *p;
- int l, ok;
-
- arg = *argv;
- ok = 1;
- if (arg[0] == '/' || arg[0] == 0)
- ok = 0;
- else {
- for (p = arg; *p != 0; ) {
- if (p[0] == '.' && p[1] == '.' && (p[2] == '/' || p[2] == 0)) {
- ok = 0;
- break;
- }
- while (*p != '/' && *p != 0)
- ++p;
- if (*p == '/')
- ++p;
- }
- }
- if (!ok) {
- option_error("call option value may not contain .. or start with /");
- return 0;
- }
-
- l = strlen(arg) + strlen(_PATH_PEERFILES) + 1;
- if ((fname = (char *) malloc(l)) == NULL)
- novm("call file name");
- slprintf(fname, l, "%s%s", _PATH_PEERFILES, arg);
-
- ok = options_from_file(fname, 1, 1, 1);
-
- free(fname);
- return ok;
-}
-
-#ifdef PPP_FILTER
-/*
- * setpassfilter - Set the pass filter for packets
- */
-static int
-setpassfilter(argv)
- char **argv;
-{
- pc.linktype = DLT_PPP;
- pc.snapshot = PPP_HDRLEN;
-
- if (pcap_compile(&pc, &pass_filter, *argv, 1, netmask) == 0)
- return 1;
- option_error("error in pass-filter expression: %s\n", pcap_geterr(&pc));
- return 0;
-}
-
-/*
- * setactivefilter - Set the active filter for packets
- */
-static int
-setactivefilter(argv)
- char **argv;
-{
- pc.linktype = DLT_PPP;
- pc.snapshot = PPP_HDRLEN;
-
- if (pcap_compile(&pc, &active_filter, *argv, 1, netmask) == 0)
- return 1;
- option_error("error in active-filter expression: %s\n", pcap_geterr(&pc));
- return 0;
-}
-#endif
-
-/*
- * setdomain - Set domain name to append to hostname
- */
-static int
-setdomain(argv)
- char **argv;
-{
- gethostname(hostname, MAXNAMELEN);
- if (**argv != 0) {
- if (**argv != '.')
- strncat(hostname, ".", MAXNAMELEN - strlen(hostname));
- domain = hostname + strlen(hostname);
- strncat(hostname, *argv, MAXNAMELEN - strlen(hostname));
- }
- hostname[MAXNAMELEN-1] = 0;
- return (1);
-}
-
-
-static int
-setlogfile(argv)
- char **argv;
-{
- int fd, err;
-
- if (!privileged_option)
- seteuid(getuid());
- fd = open(*argv, O_WRONLY | O_APPEND | O_CREAT | O_EXCL, 0644);
- if (fd < 0 && errno == EEXIST)
- fd = open(*argv, O_WRONLY | O_APPEND);
- err = errno;
- if (!privileged_option)
- seteuid(0);
- if (fd < 0) {
- errno = err;
- option_error("Can't open log file %s: %m", *argv);
- return 0;
- }
- strlcpy(logfile_name, *argv, sizeof(logfile_name));
- if (logfile_fd >= 0)
- close(logfile_fd);
- logfile_fd = fd;
- log_to_fd = fd;
- log_default = 0;
- return 1;
-}
-
-#ifdef PLUGIN
-static int
-loadplugin(argv)
- char **argv;
-{
- char *arg = *argv;
- void *handle;
- const char *err;
- void (*init) __P((void));
- char *path = arg;
- const char *vers;
-
- if (strchr(arg, '/') == 0) {
- const char *base = _PATH_PLUGIN;
- int l = strlen(base) + strlen(arg) + 2;
- path = malloc(l);
- if (path == 0)
- novm("plugin file path");
- strlcpy(path, base, l);
- strlcat(path, "/", l);
- strlcat(path, arg, l);
- }
- handle = dlopen(path, RTLD_GLOBAL | RTLD_NOW);
- if (handle == 0) {
- err = dlerror();
- if (err != 0)
- option_error("%s", err);
- option_error("Couldn't load plugin %s", arg);
- goto err;
- }
- init = (void (*)(void))dlsym(handle, "plugin_init");
- if (init == 0) {
- option_error("%s has no initialization entry point", arg);
- goto errclose;
- }
- vers = (const char *) dlsym(handle, "pppd_version");
- if (vers == 0) {
- warn("Warning: plugin %s has no version information", arg);
- } else if (strcmp(vers, VERSION) != 0) {
- option_error("Plugin %s is for pppd version %s, this is %s",
- vers, VERSION);
- goto errclose;
- }
- info("Plugin %s loaded.", arg);
- (*init)();
- return 1;
-
- errclose:
- dlclose(handle);
- err:
- if (path != arg)
- free(path);
- return 0;
-}
-#endif /* PLUGIN */
diff --git a/mdk-stage1/ppp/pppd/patchlevel.h b/mdk-stage1/ppp/pppd/patchlevel.h
deleted file mode 100644
index 2a2d816f1..000000000
--- a/mdk-stage1/ppp/pppd/patchlevel.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $Id$ */
-
-#define VERSION "2.4.1"
-#define DATE "25 March 2001"
diff --git a/mdk-stage1/ppp/pppd/pathnames.h b/mdk-stage1/ppp/pppd/pathnames.h
deleted file mode 100644
index e80784567..000000000
--- a/mdk-stage1/ppp/pppd/pathnames.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * define path names
- *
- * $Id$
- */
-
-#define _PATH_VARRUN "/var/run/"
-#define _PATH_DEVNULL "/dev/null"
-#define _ROOT_PATH
-
-#define _PATH_UPAPFILE _ROOT_PATH "/etc/ppp/pap-secrets"
-#define _PATH_CHAPFILE _ROOT_PATH "/etc/ppp/chap-secrets"
-#define _PATH_SYSOPTIONS _ROOT_PATH "/etc/ppp/options"
-#define _PATH_IPUP _ROOT_PATH "/etc/ppp/ip-up"
-#define _PATH_IPDOWN _ROOT_PATH "/etc/ppp/ip-down"
-#define _PATH_AUTHUP _ROOT_PATH "/etc/ppp/auth-up"
-#define _PATH_AUTHDOWN _ROOT_PATH "/etc/ppp/auth-down"
-#define _PATH_TTYOPT _ROOT_PATH "/etc/ppp/options."
-#define _PATH_CONNERRS _ROOT_PATH "/etc/ppp/connect-errors"
-#define _PATH_PEERFILES _ROOT_PATH "/etc/ppp/peers/"
-#define _PATH_RESOLV _ROOT_PATH "/etc/resolv.conf"
-
-#define _PATH_USEROPT ".ppprc"
-
-#define _PATH_PPPDB _ROOT_PATH _PATH_VARRUN "pppd.tdb"
diff --git a/mdk-stage1/ppp/pppd/plugins/Makefile.linux b/mdk-stage1/ppp/pppd/plugins/Makefile.linux
deleted file mode 100644
index a64256461..000000000
--- a/mdk-stage1/ppp/pppd/plugins/Makefile.linux
+++ /dev/null
@@ -1,19 +0,0 @@
-CC = gcc
-CFLAGS = -g -O2 -I.. -I../../include -fPIC
-LDFLAGS = -shared
-INSTALL = install
-
-all: minconn.so passprompt.so
-
-minconn.so: minconn.c
- $(CC) -o $@ $(LDFLAGS) $(CFLAGS) minconn.c
-
-passprompt.so: passprompt.c
- $(CC) -o $@ $(LDFLAGS) $(CFLAGS) passprompt.c
-
-LIBDIR = /usr/lib/pppd
-
-install: minconn.so passprompt.so
- version=`awk -F '"' '/VERSION/ { print $$2; }' ../patchlevel.h`; \
- $(INSTALL) -d $(LIBDIR)/$$version; \
- $(INSTALL) $? $(LIBDIR)/$$version \ No newline at end of file
diff --git a/mdk-stage1/ppp/pppd/plugins/Makefile.sol2 b/mdk-stage1/ppp/pppd/plugins/Makefile.sol2
deleted file mode 100644
index 8f4398258..000000000
--- a/mdk-stage1/ppp/pppd/plugins/Makefile.sol2
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Makefile for plugins on Solaris 2
-#
-# $Id$
-#
-
-include ../../svr4/Makedefs
-
-CFLAGS = -c -O -I.. -I../../include $(COPTS)
-LDFLAGS = -G
-
-all: minconn.so
-
-minconn.so: minconn.o
- ld -o $@ $(LDFLAGS) -h $@ minconn.o
-
-minconn.o: minconn.c
- $(CC) $(CFLAGS) -c $?
-
-passprompt.so: passprompt.o
- ld -o $@ $(LDFLAGS) -h $@ passprompt.o
-
-passprompt.o: passprompt.c
- $(CC) $(CFLAGS) -c $?
-
-clean:
- rm -f *.o *.so
diff --git a/mdk-stage1/ppp/pppd/plugins/minconn.c b/mdk-stage1/ppp/pppd/plugins/minconn.c
deleted file mode 100644
index 02ea34bf6..000000000
--- a/mdk-stage1/ppp/pppd/plugins/minconn.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * minconn.c - pppd plugin to implement a `minconnect' option.
- *
- * Copyright 1999 Paul Mackerras.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms. The name of the author
- * may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#include <stddef.h>
-#include <time.h>
-#include "pppd.h"
-
-char pppd_version[] = VERSION;
-
-static int minconnect = 0;
-
-static option_t my_options[] = {
- { "minconnect", o_int, &minconnect,
- "Set minimum connect time before idle timeout applies" },
- { NULL }
-};
-
-static int my_get_idle(struct ppp_idle *idle)
-{
- time_t t;
-
- if (idle == NULL)
- return minconnect? minconnect: idle_time_limit;
- t = idle->xmit_idle;
- if (idle->recv_idle < t)
- t = idle->recv_idle;
- return idle_time_limit - t;
-}
-
-void plugin_init(void)
-{
- info("plugin_init");
- add_options(my_options);
- idle_time_hook = my_get_idle;
-}
diff --git a/mdk-stage1/ppp/pppd/plugins/passprompt.c b/mdk-stage1/ppp/pppd/plugins/passprompt.c
deleted file mode 100644
index 5e6a7f90b..000000000
--- a/mdk-stage1/ppp/pppd/plugins/passprompt.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * passprompt.c - pppd plugin to invoke an external PAP password prompter
- *
- * Copyright 1999 Paul Mackerras, Alan Curry.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <errno.h>
-#include <unistd.h>
-#include <sys/wait.h>
-#include <syslog.h>
-#include "pppd.h"
-
-char pppd_version[] = VERSION;
-
-static char promptprog[PATH_MAX+1];
-
-static option_t options[] = {
- { "promptprog", o_string, promptprog,
- "External PAP password prompting program",
- OPT_STATIC, NULL, PATH_MAX },
- { NULL }
-};
-
-static int promptpass(char *user, char *passwd)
-{
- int p[2];
- pid_t kid;
- int readgood, wstat;
- size_t red;
-
- if (promptprog[0] == 0 || access(promptprog, X_OK) < 0)
- return -1; /* sorry, can't help */
-
- if (!passwd)
- return 1;
-
- if (pipe(p)) {
- warn("Can't make a pipe for %s", promptprog);
- return 0;
- }
- if ((kid = fork()) == (pid_t) -1) {
- warn("Can't fork to run %s", promptprog);
- close(p[0]);
- close(p[1]);
- return 0;
- }
- if (!kid) {
- /* we are the child, exec the program */
- char *argv[4], fdstr[32];
- sys_close();
- closelog();
- close(p[0]);
- seteuid(getuid());
- setegid(getgid());
- argv[0] = promptprog;
- argv[1] = user;
- argv[2] = remote_name;
- sprintf(fdstr, "%d", p[1]);
- argv[3] = fdstr;
- argv[4] = 0;
- execv(*argv, argv);
- _exit(127);
- }
-
- /* we are the parent, read the password from the pipe */
- close(p[1]);
- readgood = 0;
- do {
- red = read(p[0], passwd + readgood, MAXSECRETLEN-1 - readgood);
- if (red == 0)
- break;
- if (red < 0) {
- error("Can't read secret from %s: %m", promptprog);
- readgood = -1;
- break;
- }
- readgood += red;
- } while (readgood < MAXSECRETLEN - 1);
- passwd[readgood] = 0;
- close(p[0]);
-
- /* now wait for child to exit */
- while (waitpid(kid, &wstat, 0) < 0) {
- if (errno != EINTR) {
- warn("error waiting for %s: %m", promptprog);
- break;
- }
- }
-
- if (readgood < 0)
- return 0;
- if (!WIFEXITED(wstat))
- warn("%s terminated abnormally", promptprog);
- if (WEXITSTATUS(wstat))
- warn("%s exited with code %d", promptprog, WEXITSTATUS(status));
-
- return 1;
-}
-
-void plugin_init(void)
-{
- add_options(options);
- pap_passwd_hook = promptpass;
-}
diff --git a/mdk-stage1/ppp/pppd/ppp.pam b/mdk-stage1/ppp/pppd/ppp.pam
deleted file mode 100644
index 475a4bc88..000000000
--- a/mdk-stage1/ppp/pppd/ppp.pam
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-# Information for the PPPD process with the 'login' option.
-auth required pam_nologin.so
-auth required pam_unix.so
-account required pam_unix.so
-session required pam_unix.so \ No newline at end of file
diff --git a/mdk-stage1/ppp/pppd/pppd.8 b/mdk-stage1/ppp/pppd/pppd.8
deleted file mode 100644
index ab091cd83..000000000
--- a/mdk-stage1/ppp/pppd/pppd.8
+++ /dev/null
@@ -1,1591 +0,0 @@
-.\" manual page [] for pppd 2.4
-.\" $Id$
-.\" SH section heading
-.\" SS subsection heading
-.\" LP paragraph
-.\" IP indented paragraph
-.\" TP hanging label
-.TH PPPD 8
-.SH NAME
-pppd \- Point to Point Protocol daemon
-.SH SYNOPSIS
-.B pppd
-[
-.I tty_name
-] [
-.I speed
-] [
-.I options
-]
-.SH DESCRIPTION
-.LP
-The Point-to-Point Protocol (PPP) provides a method for transmitting
-datagrams over serial point-to-point links. PPP
-is composed of three parts: a method for encapsulating datagrams over
-serial links, an extensible Link Control Protocol (LCP), and
-a family of Network Control Protocols (NCP) for establishing
-and configuring different network-layer protocols.
-.LP
-The encapsulation scheme is provided by driver code in the kernel.
-Pppd provides the basic LCP, authentication support, and an NCP for
-establishing and configuring the Internet Protocol (IP) (called the IP
-Control Protocol, IPCP).
-.SH FREQUENTLY USED OPTIONS
-.TP
-.I <tty_name>
-Communicate over the named device. The string "/dev/" is prepended if
-necessary. If no device name is given, or if the name of the terminal
-connected to the standard input is given, pppd will use that terminal,
-and will not fork to put itself in the background. A value for this
-option from a privileged source cannot be overridden by a
-non-privileged user.
-.TP
-.I <speed>
-Set the baud rate to <speed> (a decimal number). On systems such as
-4.4BSD and NetBSD, any speed can be specified. Other systems
-(e.g. SunOS) allow only a limited set of speeds.
-.TP
-.B asyncmap \fI<map>
-Set the async character map to <map>. This map describes which
-control characters cannot be successfully received over the serial
-line. Pppd will ask the peer to send these characters as a 2-byte
-escape sequence. The argument is a 32 bit hex number with each bit
-representing a character to escape. Bit 0 (00000001) represents the
-character 0x00; bit 31 (80000000) represents the character 0x1f or ^_.
-If multiple \fIasyncmap\fR options are given, the values are ORed
-together. If no \fIasyncmap\fR option is given, no async character
-map will be negotiated for the receive direction; the peer should then
-escape \fIall\fR control characters. To escape transmitted
-characters, use the \fIescape\fR option.
-.TP
-.B auth
-Require the peer to authenticate itself before allowing network
-packets to be sent or received. This option is the default if the
-system has a default route. If neither this option nor the
-\fInoauth\fR option is specified, pppd will only allow the peer to use
-IP addresses to which the system does not already have a route.
-.TP
-.B call \fIname
-Read options from the file /etc/ppp/peers/\fIname\fR. This file may
-contain privileged options, such as \fInoauth\fR, even if pppd
-is not being run by root. The \fIname\fR string may not begin with /
-or include .. as a pathname component. The format of the options file
-is described below.
-.TP
-.B connect \fIscript
-Use the executable or shell command specified by \fIscript\fR to set
-up the serial line. This script would typically use the chat(8)
-program to dial the modem and start the remote ppp session. A value
-for this option from a privileged source cannot be overridden by a
-non-privileged user.
-.TP
-.B crtscts
-Use hardware flow control (i.e. RTS/CTS) to control the flow of
-data on the serial port. If neither the \fIcrtscts\fR, the
-\fInocrtscts\fR, the \fIcdtrcts\fR nor the \fInocdtrcts\fR option
-is given, the hardware flow control setting for the serial port is
-left unchanged.
-Some serial ports (such as Macintosh serial ports) lack a true
-RTS output. Such serial ports use this mode to implement
-unidirectional flow control. The serial port will
-suspend transmission when requested by the modem (via CTS)
-but will be unable to request the modem stop sending to the
-computer. This mode retains the ability to use DTR as
-a modem control line.
-.TP
-.B defaultroute
-Add a default route to the system routing tables, using the peer as
-the gateway, when IPCP negotiation is successfully completed.
-This entry is removed when the PPP connection is broken. This option
-is privileged if the \fInodefaultroute\fR option has been specified.
-.TP
-.B disconnect \fIscript
-Run the executable or shell command specified by \fIscript\fR after
-pppd has terminated the link. This script could, for example, issue
-commands to the modem to cause it to hang up if hardware modem control
-signals were not available. The disconnect script is not run if the
-modem has already hung up. A value for this option from a privileged
-source cannot be overridden by a non-privileged user.
-.TP
-.B escape \fIxx,yy,...
-Specifies that certain characters should be escaped on transmission
-(regardless of whether the peer requests them to be escaped with its
-async control character map). The characters to be escaped are
-specified as a list of hex numbers separated by commas. Note that
-almost any character can be specified for the \fIescape\fR option,
-unlike the \fIasyncmap\fR option which only allows control characters
-to be specified. The characters which may not be escaped are those
-with hex values 0x20 - 0x3f or 0x5e.
-.TP
-.B file \fIname
-Read options from file \fIname\fR (the format is described below).
-The file must be readable by the user who has invoked pppd.
-.TP
-.B init \fIscript
-Run the executable or shell command specified by \fIscript\fR to
-initialize the serial line. This script would typically use the
-chat(8) program to configure the modem to enable auto answer. A value
-for this option from a privileged source cannot be overridden by a
-non-privileged user.
-.TP
-.B lock
-Specifies that pppd should create a UUCP-style lock file for the
-serial device to ensure exclusive access to the device.
-.TP
-.B mru \fIn
-Set the MRU [Maximum Receive Unit] value to \fIn\fR. Pppd
-will ask the peer to send packets of no more than \fIn\fR bytes. The
-minimum MRU value is 128. The default MRU value is 1500. A value of
-296 is recommended for slow links (40 bytes for TCP/IP header + 256
-bytes of data). (Note that for IPv6 MRU must be at least 1280)
-.TP
-.B mtu \fIn
-Set the MTU [Maximum Transmit Unit] value to \fIn\fR. Unless the
-peer requests a smaller value via MRU negotiation, pppd will
-request that the kernel networking code send data packets of no more
-than \fIn\fR bytes through the PPP network interface. (Note that for
-IPv6 MTU must be at least 1280)
-.TP
-.B passive
-Enables the "passive" option in the LCP. With this option, pppd will
-attempt to initiate a connection; if no reply is received from the
-peer, pppd will then just wait passively for a valid LCP packet from
-the peer, instead of exiting, as it would without this option.
-.SH OPTIONS
-.TP
-.I <local_IP_address>\fB:\fI<remote_IP_address>
-Set the local and/or remote interface IP addresses. Either one may be
-omitted. The IP addresses can be specified with a host name or in
-decimal dot notation (e.g. 150.234.56.78). The default local
-address is the (first) IP address of the system (unless the
-\fInoipdefault\fR
-option is given). The remote address will be obtained from the peer
-if not specified in any option. Thus, in simple cases, this option is
-not required. If a local and/or remote IP address is specified with
-this option, pppd
-will not accept a different value from the peer in the IPCP
-negotiation, unless the \fIipcp-accept-local\fR and/or
-\fIipcp-accept-remote\fR options are given, respectively.
-.TP
-.B ipv6 \fI<local_interface_identifier>\fR,\fI<remote_interface_identifier>
-Set the local and/or remote 64-bit interface identifier. Either one may be
-omitted. The identifier must be specified in standard ascii notation of
-IPv6 addresses (e.g. ::dead:beef). If the
-\fIipv6cp-use-ipaddr\fR
-option is given, the local identifier is the local IPv4 address (see above).
-On systems which supports a unique persistent id, such as EUI-48 derived
-from the Ethernet MAC address, \fIipv6cp-use-persistent\fR option can be
-used to replace the \fIipv6 <local>,<remote>\fR option. Otherwise the
-identifier is randomized.
-.TP
-.B active-filter \fIfilter-expression
-Specifies a packet filter to be applied to data packets to determine
-which packets are to be regarded as link activity, and therefore reset
-the idle timer, or cause the link to be brought up in demand-dialling
-mode. This option is useful in conjunction with the
-\fBidle\fR option if there are packets being sent or received
-regularly over the link (for example, routing information packets)
-which would otherwise prevent the link from ever appearing to be idle.
-The \fIfilter-expression\fR syntax is as described for tcpdump(1),
-except that qualifiers which are inappropriate for a PPP link, such as
-\fBether\fR and \fBarp\fR, are not permitted. Generally the filter
-expression should be enclosed in single-quotes to prevent whitespace
-in the expression from being interpreted by the shell. This option
-is currently only available under NetBSD, and then only
-if both the kernel and pppd were compiled with PPP_FILTER defined.
-.TP
-.B allow-ip \fIaddress(es)
-Allow peers to use the given IP address or subnet without
-authenticating themselves. The parameter is parsed as for each
-element of the list of allowed IP addresses in the secrets files (see
-the AUTHENTICATION section below).
-.TP
-.B bsdcomp \fInr,nt
-Request that the peer compress packets that it sends, using the
-BSD-Compress scheme, with a maximum code size of \fInr\fR bits, and
-agree to compress packets sent to the peer with a maximum code size of
-\fInt\fR bits. If \fInt\fR is not specified, it defaults to the value
-given for \fInr\fR. Values in the range 9 to 15 may be used for
-\fInr\fR and \fInt\fR; larger values give better compression but
-consume more kernel memory for compression dictionaries.
-Alternatively, a value of 0 for \fInr\fR or \fInt\fR disables
-compression in the corresponding direction. Use \fInobsdcomp\fR or
-\fIbsdcomp 0\fR to disable BSD-Compress compression entirely.
-.TP
-.B cdtrcts
-Use a non-standard hardware flow control (i.e. DTR/CTS) to control
-the flow of data on the serial port. If neither the \fIcrtscts\fR,
-the \fInocrtscts\fR, the \fIcdtrcts\fR nor the \fInocdtrcts\fR
-option is given, the hardware flow control setting for the serial
-port is left unchanged.
-Some serial ports (such as Macintosh serial ports) lack a true
-RTS output. Such serial ports use this mode to implement true
-bi-directional flow control. The sacrifice is that this flow
-control mode does not permit using DTR as a modem control line.
-.TP
-.B chap-interval \fIn
-If this option is given, pppd will rechallenge the peer every \fIn\fR
-seconds.
-.TP
-.B chap-max-challenge \fIn
-Set the maximum number of CHAP challenge transmissions to \fIn\fR
-(default 10).
-.TP
-.B chap-restart \fIn
-Set the CHAP restart interval (retransmission timeout for challenges)
-to \fIn\fR seconds (default 3).
-.TP
-.B connect-delay \fIn
-Wait for up \fIn\fR milliseconds after the connect script finishes for
-a valid PPP packet from the peer. At the end of this time, or when a
-valid PPP packet is received from the peer, pppd will commence
-negotiation by sending its first LCP packet. The default value is
-1000 (1 second). This wait period only applies if the \fBconnect\fR
-or \fBpty\fR option is used.
-.TP
-.B debug
-Enables connection debugging facilities.
-If this option is given, pppd will log the contents of all
-control packets sent or received in a readable form. The packets are
-logged through syslog with facility \fIdaemon\fR and level
-\fIdebug\fR. This information can be directed to a file by setting up
-/etc/syslog.conf appropriately (see syslog.conf(5)).
-.TP
-.B default-asyncmap
-Disable asyncmap negotiation, forcing all control characters to be
-escaped for both the transmit and the receive direction.
-.TP
-.B default-mru
-Disable MRU [Maximum Receive Unit] negotiation. With this option,
-pppd will use the default MRU value of 1500 bytes for both the
-transmit and receive direction.
-.TP
-.B deflate \fInr,nt
-Request that the peer compress packets that it sends, using the
-Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
-agree to compress packets sent to the peer with a maximum window size
-of \fI2**nt\fR bytes. If \fInt\fR is not specified, it defaults to
-the value given for \fInr\fR. Values in the range 9 to 15 may be used
-for \fInr\fR and \fInt\fR; larger values give better compression but
-consume more kernel memory for compression dictionaries.
-Alternatively, a value of 0 for \fInr\fR or \fInt\fR disables
-compression in the corresponding direction. Use \fInodeflate\fR or
-\fIdeflate 0\fR to disable Deflate compression entirely. (Note: pppd
-requests Deflate compression in preference to BSD-Compress if the peer
-can do either.)
-.TP
-.B demand
-Initiate the link only on demand, i.e. when data traffic is present.
-With this option, the remote IP address must be specified by the user
-on the command line or in an options file. Pppd will initially
-configure the interface and enable it for IP traffic without
-connecting to the peer. When traffic is available, pppd will
-connect to the peer and perform negotiation, authentication, etc.
-When this is completed, pppd will commence passing data packets
-(i.e., IP packets) across the link.
-
-The \fIdemand\fR option implies the \fIpersist\fR option. If this
-behaviour is not desired, use the \fInopersist\fR option after the
-\fIdemand\fR option. The \fIidle\fR and \fIholdoff\fR
-options are also useful in conjuction with the \fIdemand\fR option.
-.TP
-.B domain \fId
-Append the domain name \fId\fR to the local host name for authentication
-purposes. For example, if gethostname() returns the name porsche, but
-the fully qualified domain name is porsche.Quotron.COM, you could
-specify \fIdomain Quotron.COM\fR. Pppd would then use the name
-\fIporsche.Quotron.COM\fR for looking up secrets in the secrets file,
-and as the default name to send to the peer when authenticating itself
-to the peer. This option is privileged.
-.TP
-.B dryrun
-With the \fBdryrun\fR option, pppd will print out all the option
-values which have been set and then exit, after parsing the command
-line and options files and checking the option values, but before
-initiating the link. The option values are logged at level info, and
-also printed to standard output unless the device on standard output
-is the device that pppd would be using to communicate with the peer.
-.TP
-.B dump
-With the \fBdump\fR option, pppd will print out all the option values
-which have been set. This option is like the \fBdryrun\fR option
-except that pppd proceeds as normal rather than exiting.
-.TP
-.B endpoint \fI<epdisc>
-Sets the endpoint discriminator sent by the local machine to the peer
-during multilink negotiation to \fI<epdisc>\fR. The default is to use
-the MAC address of the first ethernet interface on the system, if any,
-otherwise the IPv4 address corresponding to the hostname, if any,
-provided it is not in the multicast or locally-assigned IP address
-ranges, or the localhost address. The endpoint discriminator can be
-the string \fBnull\fR or of the form \fItype\fR:\fIvalue\fR, where
-type is a decimal number or one of the strings \fBlocal\fR, \fBIP\fR,
-\fBMAC\fR, \fBmagic\fR, or \fBphone\fR. The value is an IP address in
-dotted-decimal notation for the \fBIP\fR type, or a string of bytes in
-hexadecimal, separated by periods or colons for the other types. For
-the MAC type, the value may also be the name of an ethernet or similar
-network interface. This option is currently only available under
-Linux.
-.TP
-.B hide-password
-When logging the contents of PAP packets, this option causes pppd to
-exclude the password string from the log. This is the default.
-.TP
-.B holdoff \fIn
-Specifies how many seconds to wait before re-initiating the link after
-it terminates. This option only has any effect if the \fIpersist\fR
-or \fIdemand\fR option is used. The holdoff period is not applied if
-the link was terminated because it was idle.
-.TP
-.B idle \fIn
-Specifies that pppd should disconnect if the link is idle for \fIn\fR
-seconds. The link is idle when no data packets (i.e. IP packets) are
-being sent or received. Note: it is not advisable to use this option
-with the \fIpersist\fR option without the \fIdemand\fR option.
-If the \fBactive-filter\fR
-option is given, data packets which are rejected by the specified
-activity filter also count as the link being idle.
-.TP
-.B ipcp-accept-local
-With this option, pppd will accept the peer's idea of our local IP
-address, even if the local IP address was specified in an option.
-.TP
-.B ipcp-accept-remote
-With this option, pppd will accept the peer's idea of its (remote) IP
-address, even if the remote IP address was specified in an option.
-.TP
-.B ipcp-max-configure \fIn
-Set the maximum number of IPCP configure-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B ipcp-max-failure \fIn
-Set the maximum number of IPCP configure-NAKs returned before starting
-to send configure-Rejects instead to \fIn\fR (default 10).
-.TP
-.B ipcp-max-terminate \fIn
-Set the maximum number of IPCP terminate-request transmissions to
-\fIn\fR (default 3).
-.TP
-.B ipcp-restart \fIn
-Set the IPCP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B ipparam \fIstring
-Provides an extra parameter to the ip-up and ip-down scripts. If this
-option is given, the \fIstring\fR supplied is given as the 6th
-parameter to those scripts.
-.TP
-.B ipv6cp-max-configure \fIn
-Set the maximum number of IPv6CP configure-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B ipv6cp-max-failure \fIn
-Set the maximum number of IPv6CP configure-NAKs returned before starting
-to send configure-Rejects instead to \fIn\fR (default 10).
-.TP
-.B ipv6cp-max-terminate \fIn
-Set the maximum number of IPv6CP terminate-request transmissions to
-\fIn\fR (default 3).
-.TP
-.B ipv6cp-restart \fIn
-Set the IPv6CP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B ipx
-Enable the IPXCP and IPX protocols. This option is presently only
-supported under Linux, and only if your kernel has been configured to
-include IPX support.
-.TP
-.B ipx-network \fIn
-Set the IPX network number in the IPXCP configure request frame to
-\fIn\fR, a hexadecimal number (without a leading 0x). There is no
-valid default. If this option is not specified, the network number is
-obtained from the peer. If the peer does not have the network number,
-the IPX protocol will not be started.
-.TP
-.B ipx-node \fIn\fB:\fIm
-Set the IPX node numbers. The two node numbers are separated from each
-other with a colon character. The first number \fIn\fR is the local
-node number. The second number \fIm\fR is the peer's node number. Each
-node number is a hexadecimal number, at most 10 digits long. The node
-numbers on the ipx-network must be unique. There is no valid
-default. If this option is not specified then the node numbers are
-obtained from the peer.
-.TP
-.B ipx-router-name \fI<string>
-Set the name of the router. This is a string and is sent to the peer
-as information data.
-.TP
-.B ipx-routing \fIn
-Set the routing protocol to be received by this option. More than one
-instance of \fIipx-routing\fR may be specified. The '\fInone\fR'
-option (0) may be specified as the only instance of ipx-routing. The
-values may be \fI0\fR for \fINONE\fR, \fI2\fR for \fIRIP/SAP\fR, and
-\fI4\fR for \fINLSP\fR.
-.TP
-.B ipxcp-accept-local
-Accept the peer's NAK for the node number specified in the ipx-node
-option. If a node number was specified, and non-zero, the default is
-to insist that the value be used. If you include this option then you
-will permit the peer to override the entry of the node number.
-.TP
-.B ipxcp-accept-network
-Accept the peer's NAK for the network number specified in the
-ipx-network option. If a network number was specified, and non-zero, the
-default is to insist that the value be used. If you include this
-option then you will permit the peer to override the entry of the node
-number.
-.TP
-.B ipxcp-accept-remote
-Use the peer's network number specified in the configure request
-frame. If a node number was specified for the peer and this option was
-not specified, the peer will be forced to use the value which you have
-specified.
-.TP
-.B ipxcp-max-configure \fIn
-Set the maximum number of IPXCP configure request frames which the
-system will send to \fIn\fR. The default is 10.
-.TP
-.B ipxcp-max-failure \fIn
-Set the maximum number of IPXCP NAK frames which the local system will
-send before it rejects the options. The default value is 3.
-.TP
-.B ipxcp-max-terminate \fIn
-Set the maximum nuber of IPXCP terminate request frames before the
-local system considers that the peer is not listening to them. The
-default value is 3.
-.TP
-.B kdebug \fIn
-Enable debugging code in the kernel-level PPP driver. The argument
-values depend on the specific kernel driver, but in general a value of
-1 will enable general kernel debug messages. (Note that these
-messages are usually only useful for debugging the kernel driver
-itself.) For the Linux 2.2.x kernel driver, the value is a sum of
-bits: 1 to
-enable general debug messages, 2 to request that the contents of
-received packets be printed, and 4 to request that the contents of
-transmitted packets be printed. On most systems, messages printed by
-the kernel are logged by syslog(1) to a file as directed in the
-/etc/syslog.conf configuration file.
-.TP
-.B ktune
-Enables pppd to alter kernel settings as appropriate. Under Linux,
-pppd will enable IP forwarding (i.e. set /proc/sys/net/ipv4/ip_forward
-to 1) if the \fIproxyarp\fR option is used, and will enable the
-dynamic IP address option (i.e. set /proc/sys/net/ipv4/ip_dynaddr to
-1) in demand mode if the local address changes.
-.TP
-.B lcp-echo-failure \fIn
-If this option is given, pppd will presume the peer to be dead
-if \fIn\fR LCP echo-requests are sent without receiving a valid LCP
-echo-reply. If this happens, pppd will terminate the
-connection. Use of this option requires a non-zero value for the
-\fIlcp-echo-interval\fR parameter. This option can be used to enable
-pppd to terminate after the physical connection has been broken
-(e.g., the modem has hung up) in situations where no hardware modem
-control lines are available.
-.TP
-.B lcp-echo-interval \fIn
-If this option is given, pppd will send an LCP echo-request frame to
-the peer every \fIn\fR seconds. Normally the peer should respond to
-the echo-request by sending an echo-reply. This option can be used
-with the \fIlcp-echo-failure\fR option to detect that the peer is no
-longer connected.
-.TP
-.B lcp-max-configure \fIn
-Set the maximum number of LCP configure-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B lcp-max-failure \fIn
-Set the maximum number of LCP configure-NAKs returned before starting
-to send configure-Rejects instead to \fIn\fR (default 10).
-.TP
-.B lcp-max-terminate \fIn
-Set the maximum number of LCP terminate-request transmissions to
-\fIn\fR (default 3).
-.TP
-.B lcp-restart \fIn
-Set the LCP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B linkname \fIname\fR
-Sets the logical name of the link to \fIname\fR. Pppd will create a
-file named \fBppp-\fIname\fB.pid\fR in /var/run (or /etc/ppp on some
-systems) containing its process ID. This can be useful in determining
-which instance of pppd is responsible for the link to a given peer
-system. This is a privileged option.
-.TP
-.B local
-Don't use the modem control lines. With this option, pppd will ignore
-the state of the CD (Carrier Detect) signal from the modem and will
-not change the state of the DTR (Data Terminal Ready) signal.
-.TP
-.B logfd \fIn
-Send log messages to file descriptor \fIn\fR. Pppd will send log
-messages to at most one file or file descriptor (as well as sending
-the log messages to syslog), so this option and the \fBlogfile\fR
-option are mutually exclusive. The default is for pppd to send log
-messages to stdout (file descriptor 1), unless the serial port is
-already open on stdout.
-.TP
-.B logfile \fIfilename
-Append log messages to the file \fIfilename\fR (as well as sending the
-log messages to syslog). The file is opened with the privileges of
-the user who invoked pppd, in append mode.
-.TP
-.B login
-Use the system password database for authenticating the peer using
-PAP, and record the user in the system wtmp file. Note that the peer
-must have an entry in the /etc/ppp/pap-secrets file as well as the
-system password database to be allowed access.
-.TP
-.B maxconnect \fIn
-Terminate the connection when it has been available for network
-traffic for \fIn\fR seconds (i.e. \fIn\fR seconds after the first
-network control protocol comes up).
-.TP
-.B maxfail \fIn
-Terminate after \fIn\fR consecutive failed connection attempts. A
-value of 0 means no limit. The default value is 10.
-.TP
-.B modem
-Use the modem control lines. This option is the default. With this
-option, pppd will wait for the CD (Carrier Detect) signal from the
-modem to be asserted when opening the serial device (unless a connect
-script is specified), and it will drop the DTR (Data Terminal Ready)
-signal briefly when the connection is terminated and before executing
-the connect script. On Ultrix, this option implies hardware flow
-control, as for the \fIcrtscts\fR option.
-.TP
-.B mp
-Enables the use of PPP multilink; this is an alias for the `multilink'
-option. This option is currently only available under Linux.
-.TP
-.B mpshortseq
-Enables the use of short (12-bit) sequence numbers in multilink
-headers, as opposed to 24-bit sequence numbers. This option is only
-available under Linux, and only has any effect if multilink is
-enabled (see the multilink option).
-.TP
-.B mrru \fIn
-Sets the Maximum Reconstructed Receive Unit to \fIn\fR. The MRRU is
-the maximum size for a received packet on a multilink bundle, and is
-analogous to the MRU for the individual links. This option is
-currently only available under Linux, and only has any effect if
-multilink is enabled (see the multilink option).
-.TP
-.B ms-dns \fI<addr>
-If pppd is acting as a server for Microsoft Windows clients, this
-option allows pppd to supply one or two DNS (Domain Name Server)
-addresses to the clients. The first instance of this option specifies
-the primary DNS address; the second instance (if given) specifies the
-secondary DNS address. (This option was present in some older
-versions of pppd under the name \fBdns-addr\fR.)
-.TP
-.B ms-wins \fI<addr>
-If pppd is acting as a server for Microsoft Windows or "Samba"
-clients, this option allows pppd to supply one or two WINS (Windows
-Internet Name Services) server addresses to the clients. The first
-instance of this option specifies the primary WINS address; the second
-instance (if given) specifies the secondary WINS address.
-.TP
-.B multilink
-Enables the use of the PPP multilink protocol. If the peer also
-supports multilink, then this link can become part of a bundle between
-the local system and the peer. If there is an existing bundle to the
-peer, pppd will join this link to that bundle, otherwise pppd will
-create a new bundle. See the MULTILINK section below. This option is
-currently only available under Linux.
-.TP
-.B name \fIname
-Set the name of the local system for authentication purposes to
-\fIname\fR. This is a privileged option. With this option, pppd will
-use lines in the secrets files which have \fIname\fR as the second
-field when looking for a secret to use in authenticating the peer. In
-addition, unless overridden with the \fIuser\fR option, \fIname\fR
-will be used as the name to send to the peer when authenticating the
-local system to the peer. (Note that pppd does not append the domain
-name to \fIname\fR.)
-.TP
-.B netmask \fIn
-Set the interface netmask to \fIn\fR, a 32 bit netmask in "decimal dot"
-notation (e.g. 255.255.255.0). If this option is given, the value
-specified is ORed with the default netmask. The default netmask is
-chosen based on the negotiated remote IP address; it is the
-appropriate network mask for the class of the remote IP address, ORed
-with the netmasks for any non point-to-point network interfaces in the
-system which are on the same network. (Note: on some platforms, pppd
-will always use 255.255.255.255 for the netmask, if that is the only
-appropriate value for a point-to-point interface.)
-.TP
-.B noaccomp
-Disable Address/Control compression in both directions (send and
-receive).
-.TP
-.B noauth
-Do not require the peer to authenticate itself. This option is
-privileged.
-.TP
-.B nobsdcomp
-Disables BSD-Compress compression; \fBpppd\fR will not request or
-agree to compress packets using the BSD-Compress scheme.
-.TP
-.B noccp
-Disable CCP (Compression Control Protocol) negotiation. This option
-should only be required if the peer is buggy and gets confused by
-requests from pppd for CCP negotiation.
-.TP
-.B nocrtscts
-Disable hardware flow control (i.e. RTS/CTS) on the serial port.
-If neither the \fIcrtscts\fR nor the \fInocrtscts\fR nor the
-\fIcdtrcts\fR nor the \fInocdtrcts\fR option is given, the hardware
-flow control setting for the serial port is left unchanged.
-.TP
-.B nocdtrcts
-This option is a synonym for \fInocrtscts\fR. Either of these options will
-disable both forms of hardware flow control.
-.TP
-.B nodefaultroute
-Disable the \fIdefaultroute\fR option. The system administrator who
-wishes to prevent users from creating default routes with pppd
-can do so by placing this option in the /etc/ppp/options file.
-.TP
-.B nodeflate
-Disables Deflate compression; pppd will not request or agree to
-compress packets using the Deflate scheme.
-.TP
-.B nodetach
-Don't detach from the controlling terminal. Without this option, if a
-serial device other than the terminal on the standard input is
-specified, pppd will fork to become a background process.
-.TP
-.B noendpoint
-Disables pppd from sending an endpoint discriminator to the peer or
-accepting one from the peer (see the MULTILINK section below). This
-option should only be required if the peer is buggy.
-.TP
-.B noip
-Disable IPCP negotiation and IP communication. This option should
-only be required if the peer is buggy and gets confused by requests
-from pppd for IPCP negotiation.
-.TP
-.B noipv6
-Disable IPv6CP negotiation and IPv6 communication. This option should
-only be required if the peer is buggy and gets confused by requests
-from pppd for IPv6CP negotiation.
-.TP
-.B noipdefault
-Disables the default behaviour when no local IP address is specified,
-which is to determine (if possible) the local IP address from the
-hostname. With this option, the peer will have to supply the local IP
-address during IPCP negotiation (unless it specified explicitly on the
-command line or in an options file).
-.TP
-.B noipx
-Disable the IPXCP and IPX protocols. This option should only be
-required if the peer is buggy and gets confused by requests from pppd
-for IPXCP negotiation.
-.TP
-.B noktune
-Opposite of the \fIktune\fR option; disables pppd from changing system
-settings.
-.TP
-.B nolog
-Do not send log messages to a file or file descriptor. This option
-cancels the \fBlogfd\fR and \fBlogfile\fR options.
-.TP
-.B nomagic
-Disable magic number negotiation. With this option, pppd cannot
-detect a looped-back line. This option should only be needed if the
-peer is buggy.
-.TP
-.B nomp
-Disables the use of PPP multilink. This option is currently only
-available under Linux.
-.TP
-.B nompshortseq
-Disables the use of short (12-bit) sequence numbers in the PPP
-multilink protocol, forcing the use of 24-bit sequence numbers. This
-option is currently only available under Linux, and only has any
-effect if multilink is enabled.
-.TP
-.B nomultilink
-Disables the use of PPP multilink. This option is currently only
-available under Linux.
-.TP
-.B nopcomp
-Disable protocol field compression negotiation in both the receive and
-the transmit direction.
-.TP
-.B nopersist
-Exit once a connection has been made and terminated. This is the
-default unless the \fIpersist\fR or \fIdemand\fR option has been
-specified.
-.TP
-.B nopredictor1
-Do not accept or agree to Predictor-1 compression.
-.TP
-.B noproxyarp
-Disable the \fIproxyarp\fR option. The system administrator who
-wishes to prevent users from creating proxy ARP entries with pppd can
-do so by placing this option in the /etc/ppp/options file.
-.TP
-.B notty
-Normally, pppd requires a terminal device. With this option, pppd
-will allocate itself a pseudo-tty master/slave pair and use the slave
-as its terminal device. Pppd will create a child process to act as a
-`character shunt' to transfer characters between the pseudo-tty master
-and its standard input and output. Thus pppd will transmit characters
-on its standard output and receive characters on its standard input
-even if they are not terminal devices. This option increases the
-latency and CPU overhead of transferring data over the ppp interface
-as all of the characters sent and received must flow through the
-character shunt process. An explicit device name may not be given if
-this option is used.
-.TP
-.B novj
-Disable Van Jacobson style TCP/IP header compression in both the
-transmit and the receive direction.
-.TP
-.B novjccomp
-Disable the connection-ID compression option in Van Jacobson style
-TCP/IP header compression. With this option, pppd will not omit the
-connection-ID byte from Van Jacobson compressed TCP/IP headers, nor
-ask the peer to do so.
-.TP
-.B papcrypt
-Indicates that all secrets in the /etc/ppp/pap-secrets file which are
-used for checking the identity of the peer are encrypted, and thus
-pppd should not accept a password which, before encryption, is
-identical to the secret from the /etc/ppp/pap-secrets file.
-.TP
-.B pap-max-authreq \fIn
-Set the maximum number of PAP authenticate-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B pap-restart \fIn
-Set the PAP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B pap-timeout \fIn
-Set the maximum time that pppd will wait for the peer to authenticate
-itself with PAP to \fIn\fR seconds (0 means no limit).
-.TP
-.B pass-filter \fIfilter-expression
-Specifies a packet filter to applied to data packets being sent or
-received to determine which packets should be allowed to pass.
-Packets which are rejected by the filter are silently discarded. This
-option can be used to prevent specific network daemons (such as
-routed) using up link bandwidth, or to provide a basic firewall
-capability.
-The \fIfilter-expression\fR syntax is as described for tcpdump(1),
-except that qualifiers which are inappropriate for a PPP link, such as
-\fBether\fR and \fBarp\fR, are not permitted. Generally the filter
-expression should be enclosed in single-quotes to prevent whitespace
-in the expression from being interpreted by the shell. Note that it
-is possible to apply different constraints to incoming and outgoing
-packets using the \fBinbound\fR and \fBoutbound\fR qualifiers. This
-option is currently only available under NetBSD, and then only if both
-the kernel and pppd were compiled with PPP_FILTER defined.
-.TP
-.B persist
-Do not exit after a connection is terminated; instead try to reopen
-the connection.
-.TP
-.B plugin \fIfilename
-Load the shared library object file \fIfilename\fR as a plugin. This
-is a privileged option.
-.TP
-.B predictor1
-Request that the peer compress frames that it sends using Predictor-1
-compression, and agree to compress transmitted frames with Predictor-1
-if requested. This option has no effect unless the kernel driver
-supports Predictor-1 compression.
-.TP
-.B privgroup \fIgroup-name
-Allows members of group \fIgroup-name\fR to use privileged options.
-This is a privileged option. Use of this option requires care as
-there is no guarantee that members of \fIgroup-name\fR cannot use pppd
-to become root themselves. Consider it equivalent to putting the
-members of \fIgroup-name\fR in the kmem or disk group.
-.TP
-.B proxyarp
-Add an entry to this system's ARP [Address Resolution Protocol] table
-with the IP address of the peer and the Ethernet address of this
-system. This will have the effect of making the peer appear to other
-systems to be on the local ethernet.
-.TP
-.B pty \fIscript
-Specifies that the command \fIscript\fR is to be used to communicate
-rather than a specific terminal device. Pppd will allocate itself a
-pseudo-tty master/slave pair and use the slave as its terminal
-device. The \fIscript\fR will be run in a child process with the
-pseudo-tty master as its standard input and output. An explicit
-device name may not be given if this option is used. (Note: if the
-\fIrecord\fR option is used in conjuction with the \fIpty\fR option,
-the child process will have pipes on its standard input and output.)
-.TP
-.B receive-all
-With this option, pppd will accept all control characters from the
-peer, including those marked in the receive asyncmap. Without this
-option, pppd will discard those characters as specified in RFC1662.
-This option should only be needed if the peer is buggy.
-.TP
-.B record \fIfilename
-Specifies that pppd should record all characters sent and received to
-a file named \fIfilename\fR. This file is opened in append mode,
-using the user's user-ID and permissions. This option is implemented
-using a pseudo-tty and a process to transfer characters between the
-pseudo-tty and the real serial device, so it will increase the latency
-and CPU overhead of transferring data over the ppp interface. The
-characters are stored in a tagged format with timestamps, which can be
-displayed in readable form using the pppdump(8) program.
-.TP
-.B remotename \fIname
-Set the assumed name of the remote system for authentication purposes
-to \fIname\fR.
-.TP
-.B refuse-chap
-With this option, pppd will not agree to authenticate itself to the
-peer using CHAP.
-.TP
-.B refuse-pap
-With this option, pppd will not agree to authenticate itself to the
-peer using PAP.
-.TP
-.B require-chap
-Require the peer to authenticate itself using CHAP [Challenge
-Handshake Authentication Protocol] authentication.
-.TP
-.B require-pap
-Require the peer to authenticate itself using PAP [Password
-Authentication Protocol] authentication.
-.TP
-.B show-password
-When logging the contents of PAP packets, this option causes pppd to
-show the password string in the log message.
-.TP
-.B silent
-With this option, pppd will not transmit LCP packets to initiate a
-connection until a valid LCP packet is received from the peer (as for
-the `passive' option with ancient versions of pppd).
-.TP
-.B sync
-Use synchronous HDLC serial encoding instead of asynchronous.
-The device used by pppd with this option must have sync support.
-Currently supports Microgate SyncLink adapters
-under Linux and FreeBSD 2.2.8 and later.
-.TP
-.B updetach
-With this option, pppd will detach from its controlling terminal once
-it has successfully established the ppp connection (to the point where
-the first network control protocol, usually the IP control protocol,
-has come up).
-.TP
-.B usehostname
-Enforce the use of the hostname (with domain name appended, if given)
-as the name of the local system for authentication purposes (overrides
-the \fIname\fR option). This option is not normally needed since the
-\fIname\fR option is privileged.
-.TP
-.B usepeerdns
-Ask the peer for up to 2 DNS server addresses. The addresses supplied
-by the peer (if any) are passed to the /etc/ppp/ip-up script in the
-environment variables DNS1 and DNS2. In addition, pppd will create an
-/etc/ppp/resolv.conf file containing one or two nameserver lines with
-the address(es) supplied by the peer.
-.TP
-.B user \fIname
-Sets the name used for authenticating the local system to the peer to
-\fIname\fR.
-.TP
-.B vj-max-slots \fIn
-Sets the number of connection slots to be used by the Van Jacobson
-TCP/IP header compression and decompression code to \fIn\fR, which
-must be between 2 and 16 (inclusive).
-.TP
-.B welcome \fIscript
-Run the executable or shell command specified by \fIscript\fR before
-initiating PPP negotiation, after the connect script (if any) has
-completed. A value for this option from a privileged source cannot be
-overridden by a non-privileged user.
-.TP
-.B xonxoff
-Use software flow control (i.e. XON/XOFF) to control the flow of data on
-the serial port.
-.SH OPTIONS FILES
-Options can be taken from files as well as the command line. Pppd
-reads options from the files /etc/ppp/options, ~/.ppprc and
-/etc/ppp/options.\fIttyname\fR (in that order) before processing the
-options on the command line. (In fact, the command-line options are
-scanned to find the terminal name before the options.\fIttyname\fR
-file is read.) In forming the name of the options.\fIttyname\fR file,
-the initial /dev/ is removed from the terminal name, and any remaining
-/ characters are replaced with dots.
-.PP
-An options file is parsed into a series of words, delimited by
-whitespace. Whitespace can be included in a word by enclosing the
-word in double-quotes ("). A backslash (\\) quotes the following character.
-A hash (#) starts a comment, which continues until the end of the
-line. There is no restriction on using the \fIfile\fR or \fIcall\fR
-options within an options file.
-.SH SECURITY
-.I pppd
-provides system administrators with sufficient access control that PPP
-access to a server machine can be provided to legitimate users without
-fear of compromising the security of the server or the network it's
-on. This control is provided through restrictions on which IP
-addresses the peer may use, based on its authenticated identity (if
-any), and through restrictions on which options a non-privileged user
-may use. Several of pppd's options are privileged, in particular
-those which permit potentially insecure configurations; these options
-are only accepted in files which are under the control of the system
-administrator, or if pppd is being run by root.
-.PP
-The default behaviour of pppd is to allow an unauthenticated peer to
-use a given IP address only if the system does not already have a
-route to that IP address. For example, a system with a
-permanent connection to the wider internet will normally have a
-default route, and thus all peers will have to authenticate themselves
-in order to set up a connection. On such a system, the \fIauth\fR
-option is the default. On the other hand, a system where the
-PPP link is the only connection to the internet will not normally have
-a default route, so the peer will be able to use almost any IP address
-without authenticating itself.
-.PP
-As indicated above, some security-sensitive options are privileged,
-which means that they may not be used by an ordinary non-privileged
-user running a setuid-root pppd, either on the command line, in the
-user's ~/.ppprc file, or in an options file read using the \fIfile\fR
-option. Privileged options may be used in /etc/ppp/options file or in
-an options file read using the \fIcall\fR option. If pppd is being
-run by the root user, privileged options can be used without
-restriction.
-.PP
-When opening the device, pppd uses either the invoking user's user ID
-or the root UID (that is, 0), depending on whether the device name was
-specified by the user or the system administrator. If the device name
-comes from a privileged source, that is, /etc/ppp/options or an
-options file read using the \fIcall\fR option, pppd uses full root
-privileges when opening the device. Thus, by creating an appropriate
-file under /etc/ppp/peers, the system administrator can allow users to
-establish a ppp connection via a device which they would not normally
-have permission to access. Otherwise pppd uses the invoking user's
-real UID when opening the device.
-.SH AUTHENTICATION
-Authentication is the process whereby one peer convinces the other of
-its identity. This involves the first peer sending its name to the
-other, together with some kind of secret information which could only
-come from the genuine authorized user of that name. In such an
-exchange, we will call the first peer the "client" and the other the
-"server". The client has a name by which it identifies itself to the
-server, and the server also has a name by which it identifies itself
-to the client. Generally the genuine client shares some secret (or
-password) with the server, and authenticates itself by proving that it
-knows that secret. Very often, the names used for authentication
-correspond to the internet hostnames of the peers, but this is not
-essential.
-.LP
-At present, pppd supports two authentication protocols: the Password
-Authentication Protocol (PAP) and the Challenge Handshake
-Authentication Protocol (CHAP). PAP involves the client sending its
-name and a cleartext password to the server to authenticate itself.
-In contrast, the server initiates the CHAP authentication exchange by
-sending a challenge to the client (the challenge packet includes the
-server's name). The client must respond with a response which
-includes its name plus a hash value derived from the shared secret and
-the challenge, in order to prove that it knows the secret.
-.LP
-The PPP protocol, being symmetrical, allows both peers to require the
-other to authenticate itself. In that case, two separate and
-independent authentication exchanges will occur. The two exchanges
-could use different authentication protocols, and in principle,
-different names could be used in the two exchanges.
-.LP
-The default behaviour of pppd is to agree to authenticate if
-requested, and to not require authentication from the peer. However,
-pppd will not agree to authenticate itself with a particular protocol
-if it has no secrets which could be used to do so.
-.LP
-Pppd stores secrets for use in authentication in secrets
-files (/etc/ppp/pap-secrets for PAP, /etc/ppp/chap-secrets for CHAP).
-Both secrets files have the same format. The secrets files can
-contain secrets for pppd to use in authenticating itself to other
-systems, as well as secrets for pppd to use when authenticating other
-systems to itself.
-.LP
-Each line in a secrets file contains one secret. A given secret is
-specific to a particular combination of client and server - it can
-only be used by that client to authenticate itself to that server.
-Thus each line in a secrets file has at least 3 fields: the name of
-the client, the name of the server, and the secret. These fields may
-be followed by a list of the IP addresses that the specified client
-may use when connecting to the specified server.
-.LP
-A secrets file is parsed into words as for a options file, so the
-client name, server name and secrets fields must each be one word,
-with any embedded spaces or other special characters quoted or
-escaped. Note that case is significant in the client and server names
-and in the secret.
-.LP
-If the secret starts with an `@', what follows is assumed to be the
-name of a file from which to read the secret. A "*" as the client or
-server name matches any name. When selecting a secret, pppd takes the
-best match, i.e. the match with the fewest wildcards.
-.LP
-Any following words on the same line are taken to be a list of
-acceptable IP addresses for that client. If there are only 3 words on
-the line, or if the first word is "-", then all IP addresses are
-disallowed. To allow any address, use "*". A word starting with "!"
-indicates that the specified address is \fInot\fR acceptable. An
-address may be followed by "/" and a number \fIn\fR, to indicate a
-whole subnet, i.e. all addresses which have the same value in the most
-significant \fIn\fR bits. In this form, the address may be followed
-by a plus sign ("+") to indicate that one address from the subnet is
-authorized, based on the ppp network interface unit number in use.
-In this case, the host part of the address will be set to the unit
-number plus one.
-.LP
-Thus a secrets file contains both secrets for use in authenticating
-other hosts, plus secrets which we use for authenticating ourselves to
-others. When pppd is authenticating the peer (checking the peer's
-identity), it chooses a secret with the peer's name in the first
-field and the name of the local system in the second field. The
-name of the local system defaults to the hostname, with the domain
-name appended if the \fIdomain\fR option is used. This default can be
-overridden with the \fIname\fR option, except when the
-\fIusehostname\fR option is used.
-.LP
-When pppd is choosing a secret to use in authenticating itself to the
-peer, it first determines what name it is going to use to identify
-itself to the peer. This name can be specified by the user with the
-\fIuser\fR option. If this option is not used, the name defaults to
-the name of the local system, determined as described in the previous
-paragraph. Then pppd looks for a secret with this name in the first
-field and the peer's name in the second field. Pppd will know the
-name of the peer if CHAP authentication is being used, because the
-peer will have sent it in the challenge packet. However, if PAP is being
-used, pppd will have to determine the peer's name from the options
-specified by the user. The user can specify the peer's name directly
-with the \fIremotename\fR option. Otherwise, if the remote IP address
-was specified by a name (rather than in numeric form), that name will
-be used as the peer's name. Failing that, pppd will use the null
-string as the peer's name.
-.LP
-When authenticating the peer with PAP, the supplied password is first
-compared with the secret from the secrets file. If the password
-doesn't match the secret, the password is encrypted using crypt() and
-checked against the secret again. Thus secrets for authenticating the
-peer can be stored in encrypted form if desired. If the
-\fIpapcrypt\fR option is given, the first (unencrypted) comparison is
-omitted, for better security.
-.LP
-Furthermore, if the \fIlogin\fR option was specified, the username and
-password are also checked against the system password database. Thus,
-the system administrator can set up the pap-secrets file to allow PPP
-access only to certain users, and to restrict the set of IP addresses
-that each user can use. Typically, when using the \fIlogin\fR option,
-the secret in /etc/ppp/pap-secrets would be "", which will match any
-password supplied by the peer. This avoids the need to have the same
-secret in two places.
-.LP
-Authentication must be satisfactorily completed before IPCP (or any
-other Network Control Protocol) can be started. If the peer is
-required to authenticate itself, and fails to do so, pppd will
-terminated the link (by closing LCP). If IPCP negotiates an
-unacceptable IP address for the remote host, IPCP will be closed. IP
-packets can only be sent or received when IPCP is open.
-.LP
-In some cases it is desirable to allow some hosts which can't
-authenticate themselves to connect and use one of a restricted set of
-IP addresses, even when the local host generally requires
-authentication. If the peer refuses to authenticate itself when
-requested, pppd takes that as equivalent to authenticating with PAP
-using the empty string for the username and password. Thus, by adding
-a line to the pap-secrets file which specifies the empty string for
-the client and password, it is possible to allow restricted access to
-hosts which refuse to authenticate themselves.
-.SH ROUTING
-.LP
-When IPCP negotiation is completed successfully, pppd will inform the
-kernel of the local and remote IP addresses for the ppp interface.
-This is sufficient to create a host route to the remote end of the
-link, which will enable the peers to exchange IP packets.
-Communication with other machines generally requires further
-modification to routing tables and/or ARP (Address Resolution
-Protocol) tables. In most cases the \fIdefaultroute\fR and/or
-\fIproxyarp\fR options are sufficient for this, but in some cases
-further intervention is required. The /etc/ppp/ip-up script can be
-used for this.
-.LP
-Sometimes it is desirable to add a default route through the remote
-host, as in the case of a machine whose only connection to the
-Internet is through the ppp interface. The \fIdefaultroute\fR option
-causes pppd to create such a default route when IPCP comes up, and
-delete it when the link is terminated.
-.LP
-In some cases it is desirable to use proxy ARP, for example on a
-server machine connected to a LAN, in order to allow other hosts to
-communicate with the remote host. The \fIproxyarp\fR option causes
-pppd to look for a network interface on the same subnet as the remote
-host (an interface supporting broadcast and ARP, which is up and not a
-point-to-point or loopback interface). If found, pppd creates a
-permanent, published ARP entry with the IP address of the remote host
-and the hardware address of the network interface found.
-.LP
-When the \fIdemand\fR option is used, the interface IP addresses have
-already been set at the point when IPCP comes up. If pppd has not
-been able to negotiate the same addresses that it used to configure
-the interface (for example when the peer is an ISP that uses dynamic
-IP address assignment), pppd has to change the interface IP addresses
-to the negotiated addresses. This may disrupt existing connections,
-and the use of demand dialling with peers that do dynamic IP address
-assignment is not recommended.
-.SH MULTILINK
-Multilink PPP provides the capability to combine two or more PPP links
-between a pair of machines into a single `bundle', which appears as a
-single virtual PPP link which has the combined bandwidth of the
-individual links. Currently, multilink PPP is only supported under
-Linux.
-.LP
-Pppd detects that the link it is controlling is connected to the same
-peer as another link using the peer's endpoint discriminator and the
-authenticated identity of the peer (if it authenticates itself). The
-endpoint discriminator is a block of data which is hopefully unique
-for each peer. Several types of data can be used, including
-locally-assigned strings of bytes, IP addresses, MAC addresses,
-randomly strings of bytes, or E-164 phone numbers. The endpoint
-discriminator sent to the peer by pppd can be set using the endpoint
-option.
-.LP
-In circumstances the peer may send no endpoint discriminator or a
-non-unique value. The optional bundle option adds an extra string
-which is added to the peer's endpoint discriminator and authenticated
-identity when matching up links to be joined together in a bundle.
-The bundle option can also be used to allow the establishment of
-multiple bundles between the local system and the peer. Pppd uses a
-TDB database in /var/run/pppd.tdb to match up links.
-.LP
-Assuming that multilink is enabled and the peer is willing to
-negotiate multilink, then when pppd is invoked to bring up the first
-link to the peer, it will detect that no other link is connected to
-the peer and create a new bundle, that is, another ppp network
-interface unit. When another pppd is invoked to bring up another link
-to the peer, it will detect the existing bundle and join its link to
-it. Currently, if the first pppd terminates (for example, because of
-a hangup or a received signal) the bundle is destroyed.
-.SH EXAMPLES
-.LP
-The following examples assume that the /etc/ppp/options file contains
-the \fIauth\fR option (as in the default /etc/ppp/options file in the
-ppp distribution).
-.LP
-Probably the most common use of pppd is to dial out to an ISP. This
-can be done with a command such as
-.IP
-pppd call isp
-.LP
-where the /etc/ppp/peers/isp file is set up by the system
-administrator to contain something like this:
-.IP
-ttyS0 19200 crtscts
-.br
-connect '/usr/sbin/chat -v -f /etc/ppp/chat-isp'
-.br
-noauth
-.LP
-In this example, we are using chat to dial the ISP's modem and go
-through any logon sequence required. The /etc/ppp/chat-isp file
-contains the script used by chat; it could for example contain
-something like this:
-.IP
-ABORT "NO CARRIER"
-.br
-ABORT "NO DIALTONE"
-.br
-ABORT "ERROR"
-.br
-ABORT "NO ANSWER"
-.br
-ABORT "BUSY"
-.br
-ABORT "Username/Password Incorrect"
-.br
-"" "at"
-.br
-OK "at&d0&c1"
-.br
-OK "atdt2468135"
-.br
-"name:" "^Umyuserid"
-.br
-"word:" "\\qmypassword"
-.br
-"ispts" "\\q^Uppp"
-.br
-"~-^Uppp-~"
-.LP
-See the chat(8) man page for details of chat scripts.
-.LP
-Pppd can also be used to provide a dial-in ppp service for users. If
-the users already have login accounts, the simplest way to set up the
-ppp service is to let the users log in to their accounts and run pppd
-(installed setuid-root) with a command such as
-.IP
-pppd proxyarp
-.LP
-To allow a user to use the PPP facilities, you need to allocate an IP
-address for that user's machine and create an entry in
-/etc/ppp/pap-secrets or /etc/ppp/chap-secrets (depending on which
-authentication method the PPP implementation on the user's machine
-supports), so that the user's
-machine can authenticate itself. For example, if Joe has a machine
-called "joespc" which is to be allowed to dial in to the machine
-called "server" and use the IP address joespc.my.net, you would add an
-entry like this to /etc/ppp/pap-secrets or /etc/ppp/chap-secrets:
-.IP
-joespc server "joe's secret" joespc.my.net
-.LP
-Alternatively, you can create a username called (for example) "ppp",
-whose login shell is pppd and whose home directory is /etc/ppp.
-Options to be used when pppd is run this way can be put in
-/etc/ppp/.ppprc.
-.LP
-If your serial connection is any more complicated than a piece of
-wire, you may need to arrange for some control characters to be
-escaped. In particular, it is often useful to escape XON (^Q) and
-XOFF (^S), using \fIasyncmap a0000\fR. If the path includes a telnet,
-you probably should escape ^] as well (\fIasyncmap 200a0000\fR). If
-the path includes an rlogin, you will need to use the \fIescape ff\fR
-option on the end which is running the rlogin client, since many
-rlogin implementations are not transparent; they will remove the
-sequence [0xff, 0xff, 0x73, 0x73, followed by any 8 bytes] from the
-stream.
-.SH DIAGNOSTICS
-.LP
-Messages are sent to the syslog daemon using facility LOG_DAEMON.
-(This can be overriden by recompiling pppd with the macro
-LOG_PPP defined as the desired facility.) In order to see the error
-and debug messages, you will need to edit your /etc/syslog.conf file
-to direct the messages to the desired output device or file.
-.LP
-The \fIdebug\fR option causes the contents of all control packets sent
-or received to be logged, that is, all LCP, PAP, CHAP or IPCP packets.
-This can be useful if the PPP negotiation does not succeed or if
-authentication fails.
-If debugging is enabled at compile time, the \fIdebug\fR option also
-causes other debugging messages to be logged.
-.LP
-Debugging can also be enabled or disabled by sending a SIGUSR1 signal
-to the pppd process. This signal acts as a toggle.
-.SH EXIT STATUS
-The exit status of pppd is set to indicate whether any error was
-detected, or the reason for the link being terminated. The values
-used are:
-.TP
-.B 0
-Pppd has detached, or otherwise the connection was successfully
-established and terminated at the peer's request.
-.TP
-.B 1
-An immediately fatal error of some kind occurred, such as an essential
-system call failing, or running out of virtual memory.
-.TP
-.B 2
-An error was detected in processing the options given, such as two
-mutually exclusive options being used.
-.TP
-.B 3
-Pppd is not setuid-root and the invoking user is not root.
-.TP
-.B 4
-The kernel does not support PPP, for example, the PPP kernel driver is
-not included or cannot be loaded.
-.TP
-.B 5
-Pppd terminated because it was sent a SIGINT, SIGTERM or SIGHUP
-signal.
-.TP
-.B 6
-The serial port could not be locked.
-.TP
-.B 7
-The serial port could not be opened.
-.TP
-.B 8
-The connect script failed (returned a non-zero exit status).
-.TP
-.B 9
-The command specified as the argument to the \fIpty\fR option could
-not be run.
-.TP
-.B 10
-The PPP negotiation failed, that is, it didn't reach the point where
-at least one network protocol (e.g. IP) was running.
-.TP
-.B 11
-The peer system failed (or refused) to authenticate itself.
-.TP
-.B 12
-The link was established successfully and terminated because it was
-idle.
-.TP
-.B 13
-The link was established successfully and terminated because the
-connect time limit was reached.
-.TP
-.B 14
-Callback was negotiated and an incoming call should arrive shortly.
-.TP
-.B 15
-The link was terminated because the peer is not responding to echo
-requests.
-.TP
-.B 16
-The link was terminated by the modem hanging up.
-.TP
-.B 17
-The PPP negotiation failed because serial loopback was detected.
-.TP
-.B 18
-The init script failed (returned a non-zero exit status).
-.TP
-.B 19
-We failed to authenticate ourselves to the peer.
-.SH SCRIPTS
-Pppd invokes scripts at various stages in its processing which can be
-used to perform site-specific ancillary processing. These scripts are
-usually shell scripts, but could be executable code files instead.
-Pppd does not wait for the scripts to finish. The scripts are
-executed as root (with the real and effective user-id set to 0), so
-that they can do things such as update routing tables or run
-privileged daemons. Be careful that the contents of these scripts do
-not compromise your system's security. Pppd runs the scripts with
-standard input, output and error redirected to /dev/null, and with an
-environment that is empty except for some environment variables that
-give information about the link. The environment variables that pppd
-sets are:
-.TP
-.B DEVICE
-The name of the serial tty device being used.
-.TP
-.B IFNAME
-The name of the network interface being used.
-.TP
-.B IPLOCAL
-The IP address for the local end of the link. This is only set when
-IPCP has come up.
-.TP
-.B IPREMOTE
-The IP address for the remote end of the link. This is only set when
-IPCP has come up.
-.TP
-.B PEERNAME
-The authenticated name of the peer. This is only set if the peer
-authenticates itself.
-.TP
-.B SPEED
-The baud rate of the tty device.
-.TP
-.B ORIG_UID
-The real user-id of the user who invoked pppd.
-.TP
-.B PPPLOGNAME
-The username of the real user-id that invoked pppd. This is always set.
-.P
-For the ip-down and auth-down scripts, pppd also sets the following
-variables giving statistics for the connection:
-.TP
-.B CONNECT_TIME
-The number of seconds from when the PPP negotiation started until the
-connection was terminated.
-.TP
-.B BYTES_SENT
-The number of bytes sent (at the level of the serial port) during the
-connection.
-.TP
-.B BYTES_RCVD
-The number of bytes received (at the level of the serial port) during
-the connection.
-.TP
-.B LINKNAME
-The logical name of the link, set with the \fIlinkname\fR option.
-.P
-Pppd invokes the following scripts, if they exist. It is not an error
-if they don't exist.
-.TP
-.B /etc/ppp/auth-up
-A program or script which is executed after the remote system
-successfully authenticates itself. It is executed with the parameters
-.IP
-\fIinterface-name peer-name user-name tty-device speed\fR
-.IP
-Note that this script is not executed if the peer doesn't authenticate
-itself, for example when the \fInoauth\fR option is used.
-.TP
-.B /etc/ppp/auth-down
-A program or script which is executed when the link goes down, if
-/etc/ppp/auth-up was previously executed. It is executed in the same
-manner with the same parameters as /etc/ppp/auth-up.
-.TP
-.B /etc/ppp/ip-up
-A program or script which is executed when the link is available for
-sending and receiving IP packets (that is, IPCP has come up). It is
-executed with the parameters
-.IP
-\fIinterface-name tty-device speed local-IP-address
-remote-IP-address ipparam\fR
-.TP
-.B /etc/ppp/ip-down
-A program or script which is executed when the link is no longer
-available for sending and receiving IP packets. This script can be
-used for undoing the effects of the /etc/ppp/ip-up script. It is
-invoked in the same manner and with the same parameters as the ip-up
-script.
-.TP
-.B /etc/ppp/ipv6-up
-Like /etc/ppp/ip-up, except that it is executed when the link is available
-for sending and receiving IPv6 packets. It is executed with the parameters
-.IP
-\fIinterface-name tty-device speed local-link-local-address
-remote-link-local-address ipparam\fR
-.TP
-.B /etc/ppp/ipv6-down
-Similar to /etc/ppp/ip-down, but it is executed when IPv6 packets can no
-longer be transmitted on the link. It is executed with the same parameters
-as the ipv6-up script.
-.TP
-.B /etc/ppp/ipx-up
-A program or script which is executed when the link is available for
-sending and receiving IPX packets (that is, IPXCP has come up). It is
-executed with the parameters
-.IP
-\fIinterface-name tty-device speed network-number local-IPX-node-address
-remote-IPX-node-address local-IPX-routing-protocol remote-IPX-routing-protocol
-local-IPX-router-name remote-IPX-router-name ipparam pppd-pid\fR
-.IP
-The local-IPX-routing-protocol and remote-IPX-routing-protocol field
-may be one of the following:
-.IP
-NONE to indicate that there is no routing protocol
-.br
-RIP to indicate that RIP/SAP should be used
-.br
-NLSP to indicate that Novell NLSP should be used
-.br
-RIP NLSP to indicate that both RIP/SAP and NLSP should be used
-.TP
-.B /etc/ppp/ipx-down
-A program or script which is executed when the link is no longer
-available for sending and receiving IPX packets. This script can be
-used for undoing the effects of the /etc/ppp/ipx-up script. It is
-invoked in the same manner and with the same parameters as the ipx-up
-script.
-.SH FILES
-.TP
-.B /var/run/ppp\fIn\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp\fIn\fB.pid \fR(others)
-Process-ID for pppd process on ppp interface unit \fIn\fR.
-.TP
-.B /var/run/ppp-\fIname\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp-\fIname\fB.pid \fR(others)
-Process-ID for pppd process for logical link \fIname\fR (see the
-\fIlinkname\fR option).
-.TP
-.B /etc/ppp/pap-secrets
-Usernames, passwords and IP addresses for PAP authentication. This
-file should be owned by root and not readable or writable by any other
-user. Pppd will log a warning if this is not the case.
-.TP
-.B /etc/ppp/chap-secrets
-Names, secrets and IP addresses for CHAP authentication. As for
-/etc/ppp/pap-secrets, this file should be owned by root and not
-readable or writable by any other user. Pppd will log a warning if
-this is not the case.
-.TP
-.B /etc/ppp/options
-System default options for pppd, read before user default options or
-command-line options.
-.TP
-.B ~/.ppprc
-User default options, read before /etc/ppp/options.\fIttyname\fR.
-.TP
-.B /etc/ppp/options.\fIttyname
-System default options for the serial port being used, read after
-~/.ppprc. In forming the \fIttyname\fR part of this
-filename, an initial /dev/ is stripped from the port name (if
-present), and any slashes in the remaining part are converted to
-dots.
-.TP
-.B /etc/ppp/peers
-A directory containing options files which may contain privileged
-options, even if pppd was invoked by a user other than root. The
-system administrator can create options files in this directory to
-permit non-privileged users to dial out without requiring the peer to
-authenticate, but only to certain trusted peers.
-.SH SEE ALSO
-.TP
-.B RFC1144
-Jacobson, V.
-\fICompressing TCP/IP headers for low-speed serial links.\fR
-February 1990.
-.TP
-.B RFC1321
-Rivest, R.
-.I The MD5 Message-Digest Algorithm.
-April 1992.
-.TP
-.B RFC1332
-McGregor, G.
-.I PPP Internet Protocol Control Protocol (IPCP).
-May 1992.
-.TP
-.B RFC1334
-Lloyd, B.; Simpson, W.A.
-.I PPP authentication protocols.
-October 1992.
-.TP
-.B RFC1661
-Simpson, W.A.
-.I The Point\-to\-Point Protocol (PPP).
-July 1994.
-.TP
-.B RFC1662
-Simpson, W.A.
-.I PPP in HDLC-like Framing.
-July 1994.
-.TP
-.B RFC2472
-Haskin, D.
-.I IP Version 6 over PPP
-December 1998.
-.SH NOTES
-The following signals have the specified effect when sent to pppd.
-.TP
-.B SIGINT, SIGTERM
-These signals cause pppd to terminate the link (by closing LCP),
-restore the serial device settings, and exit.
-.TP
-.B SIGHUP
-This signal causes pppd to terminate the link, restore the serial
-device settings, and close the serial device. If the \fIpersist\fR or
-\fIdemand\fR option has been specified, pppd will try to reopen the
-serial device and start another connection (after the holdoff period).
-Otherwise pppd will exit. If this signal is received during the
-holdoff period, it causes pppd to end the holdoff period immediately.
-.TP
-.B SIGUSR1
-This signal toggles the state of the \fIdebug\fR option.
-.TP
-.B SIGUSR2
-This signal causes pppd to renegotiate compression. This can be
-useful to re-enable compression after it has been disabled as a result
-of a fatal decompression error. (Fatal decompression errors generally
-indicate a bug in one or other implementation.)
-
-.SH AUTHORS
-Paul Mackerras (Paul.Mackerras@cs.anu.edu.au), based on earlier work by
-Drew Perkins,
-Brad Clements,
-Karl Fox,
-Greg Christy,
-and
-Brad Parker.
diff --git a/mdk-stage1/ppp/pppd/pppd.h b/mdk-stage1/ppp/pppd/pppd.h
deleted file mode 100644
index 02f6dfcef..000000000
--- a/mdk-stage1/ppp/pppd/pppd.h
+++ /dev/null
@@ -1,787 +0,0 @@
-/*
- * pppd.h - PPP daemon global declarations.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * TODO:
- */
-
-#ifndef __PPPD_H__
-#define __PPPD_H__
-
-#include <stdio.h> /* for FILE */
-#include <limits.h> /* for NGROUPS_MAX */
-#include <sys/param.h> /* for MAXPATHLEN and BSD4_4, if defined */
-#include <sys/types.h> /* for u_int32_t, if defined */
-#include <sys/time.h> /* for struct timeval */
-#include <net/ppp_defs.h>
-#include "patchlevel.h"
-
-#if defined(__STDC__)
-#include <stdarg.h>
-#define __V(x) x
-#else
-#include <varargs.h>
-#define __V(x) (va_alist) va_dcl
-#define const
-#define volatile
-#endif
-
-#ifdef INET6
-#include "eui64.h"
-#endif
-
-/*
- * Limits.
- */
-
-#define NUM_PPP 1 /* One PPP interface supported (per process) */
-#define MAXWORDLEN 1024 /* max length of word in file (incl null) */
-#define MAXARGS 1 /* max # args to a command */
-#define MAXNAMELEN 256 /* max length of hostname or name for auth */
-#define MAXSECRETLEN 256 /* max length of password or secret */
-
-/*
- * Option descriptor structure.
- */
-
-typedef unsigned char bool;
-
-enum opt_type {
- o_special_noarg = 0,
- o_special = 1,
- o_bool,
- o_int,
- o_uint32,
- o_string,
- o_wild,
-};
-
-typedef struct {
- char *name; /* name of the option */
- enum opt_type type;
- void *addr;
- char *description;
- int flags;
- void *addr2;
- int upper_limit;
- int lower_limit;
- const char *source;
- short int priority;
- short int winner;
-} option_t;
-
-/* Values for flags */
-#define OPT_VALUE 0xff /* mask for presupplied value */
-#define OPT_HEX 0x100 /* int option is in hex */
-#define OPT_NOARG 0x200 /* option doesn't take argument */
-#define OPT_OR 0x400 /* OR in argument to value */
-#define OPT_INC 0x800 /* increment value */
-#define OPT_PRIV 0x1000 /* privileged option */
-#define OPT_STATIC 0x2000 /* string option goes into static array */
-#define OPT_LLIMIT 0x4000 /* check value against lower limit */
-#define OPT_ULIMIT 0x8000 /* check value against upper limit */
-#define OPT_LIMITS (OPT_LLIMIT|OPT_ULIMIT)
-#define OPT_ZEROOK 0x10000 /* 0 value is OK even if not within limits */
-#define OPT_HIDE 0x10000 /* for o_string, print value as ?????? */
-#define OPT_A2LIST 0x10000 /* for o_special, keep list of values */
-#define OPT_NOINCR 0x20000 /* value mustn't be increased */
-#define OPT_ZEROINF 0x40000 /* with OPT_NOINCR, 0 == infinity */
-#define OPT_PRIO 0x80000 /* process option priorities for this option */
-#define OPT_PRIOSUB 0x100000 /* subsidiary member of priority group */
-#define OPT_ALIAS 0x200000 /* option is alias for previous option */
-#define OPT_A2COPY 0x400000 /* addr2 -> second location to rcv value */
-#define OPT_ENABLE 0x800000 /* use *addr2 as enable for option */
-#define OPT_A2CLR 0x1000000 /* clear *(bool *)addr2 */
-#define OPT_PRIVFIX 0x2000000 /* user can't override if set by root */
-#define OPT_INITONLY 0x4000000 /* option can only be set in init phase */
-#define OPT_DEVEQUIV 0x8000000 /* equiv to device name */
-#define OPT_DEVNAM (OPT_INITONLY | OPT_DEVEQUIV)
-#define OPT_A2PRINTER 0x10000000 /* *addr2 is a fn for printing option */
-#define OPT_A2STRVAL 0x20000000 /* *addr2 points to current string value */
-#define OPT_NOPRINT 0x40000000 /* don't print this option at all */
-
-#define OPT_VAL(x) ((x) & OPT_VALUE)
-
-/* Values for priority */
-#define OPRIO_DEFAULT 0 /* a default value */
-#define OPRIO_CFGFILE 1 /* value from a configuration file */
-#define OPRIO_CMDLINE 2 /* value from the command line */
-#define OPRIO_SECFILE 3 /* value from options in a secrets file */
-#define OPRIO_ROOT 100 /* added to priority if OPT_PRIVFIX && root */
-
-#ifndef GIDSET_TYPE
-#define GIDSET_TYPE gid_t
-#endif
-
-/* Structure representing a list of permitted IP addresses. */
-struct permitted_ip {
- int permit; /* 1 = permit, 0 = forbid */
- u_int32_t base; /* match if (addr & mask) == base */
- u_int32_t mask; /* base and mask are in network byte order */
-};
-
-/*
- * Unfortunately, the linux kernel driver uses a different structure
- * for statistics from the rest of the ports.
- * This structure serves as a common representation for the bits
- * pppd needs.
- */
-struct pppd_stats {
- unsigned int bytes_in;
- unsigned int bytes_out;
-};
-
-/* Used for storing a sequence of words. Usually malloced. */
-struct wordlist {
- struct wordlist *next;
- char *word;
-};
-
-/* An endpoint discriminator, used with multilink. */
-#define MAX_ENDP_LEN 20 /* maximum length of discriminator value */
-struct epdisc {
- unsigned char class;
- unsigned char length;
- unsigned char value[MAX_ENDP_LEN];
-};
-
-/* values for epdisc.class */
-#define EPD_NULL 0 /* null discriminator, no data */
-#define EPD_LOCAL 1
-#define EPD_IP 2
-#define EPD_MAC 3
-#define EPD_MAGIC 4
-#define EPD_PHONENUM 5
-
-typedef void (*notify_func) __P((void *, int));
-
-struct notifier {
- struct notifier *next;
- notify_func func;
- void *arg;
-};
-
-/*
- * Global variables.
- */
-
-extern int hungup; /* Physical layer has disconnected */
-extern int ifunit; /* Interface unit number */
-extern char ifname[]; /* Interface name */
-extern char hostname[]; /* Our hostname */
-extern u_char outpacket_buf[]; /* Buffer for outgoing packets */
-extern int phase; /* Current state of link - see values below */
-extern int baud_rate; /* Current link speed in bits/sec */
-extern char *progname; /* Name of this program */
-extern int redirect_stderr;/* Connector's stderr should go to file */
-extern char peer_authname[];/* Authenticated name of peer */
-extern int privileged; /* We were run by real-uid root */
-extern int need_holdoff; /* Need holdoff period after link terminates */
-extern char **script_env; /* Environment variables for scripts */
-extern int detached; /* Have detached from controlling tty */
-extern GIDSET_TYPE groups[NGROUPS_MAX]; /* groups the user is in */
-extern int ngroups; /* How many groups valid in groups */
-extern struct pppd_stats link_stats; /* byte/packet counts etc. for link */
-extern int link_stats_valid; /* set if link_stats is valid */
-extern int link_connect_time; /* time the link was up for */
-extern int using_pty; /* using pty as device (notty or pty opt.) */
-extern int log_to_fd; /* logging to this fd as well as syslog */
-extern bool log_default; /* log_to_fd is default (stdout) */
-extern char *no_ppp_msg; /* message to print if ppp not in kernel */
-extern volatile int status; /* exit status for pppd */
-extern bool devnam_fixed; /* can no longer change devnam */
-extern int unsuccess; /* # unsuccessful connection attempts */
-extern int do_callback; /* set if we want to do callback next */
-extern int doing_callback; /* set if this is a callback */
-extern char ppp_devnam[MAXPATHLEN];
-extern struct notifier *pidchange; /* for notifications of pid changing */
-extern struct notifier *phasechange; /* for notifications of phase changes */
-extern struct notifier *exitnotify; /* for notification that we're exiting */
-extern struct notifier *sigreceived; /* notification of received signal */
-extern int listen_time; /* time to listen first (ms) */
-
-/* Values for do_callback and doing_callback */
-#define CALLBACK_DIALIN 1 /* we are expecting the call back */
-#define CALLBACK_DIALOUT 2 /* we are dialling out to call back */
-
-/*
- * Variables set by command-line options.
- */
-
-extern int debug; /* Debug flag */
-extern int kdebugflag; /* Tell kernel to print debug messages */
-extern int default_device; /* Using /dev/tty or equivalent */
-extern char devnam[MAXPATHLEN]; /* Device name */
-extern int crtscts; /* Use hardware flow control */
-extern bool modem; /* Use modem control lines */
-extern int inspeed; /* Input/Output speed requested */
-extern u_int32_t netmask; /* IP netmask to set on interface */
-extern bool lockflag; /* Create lock file to lock the serial dev */
-extern bool nodetach; /* Don't detach from controlling tty */
-extern bool updetach; /* Detach from controlling tty when link up */
-extern char *initializer; /* Script to initialize physical link */
-extern char *connect_script; /* Script to establish physical link */
-extern char *disconnect_script; /* Script to disestablish physical link */
-extern char *welcomer; /* Script to welcome client after connection */
-extern char *ptycommand; /* Command to run on other side of pty */
-extern int maxconnect; /* Maximum connect time (seconds) */
-extern char user[MAXNAMELEN];/* Our name for authenticating ourselves */
-extern char passwd[MAXSECRETLEN]; /* Password for PAP or CHAP */
-extern bool auth_required; /* Peer is required to authenticate */
-extern bool persist; /* Reopen link after it goes down */
-extern bool uselogin; /* Use /etc/passwd for checking PAP */
-extern char our_name[MAXNAMELEN];/* Our name for authentication purposes */
-extern char remote_name[MAXNAMELEN]; /* Peer's name for authentication */
-extern bool explicit_remote;/* remote_name specified with remotename opt */
-extern bool demand; /* Do dial-on-demand */
-extern char *ipparam; /* Extra parameter for ip up/down scripts */
-extern bool cryptpap; /* Others' PAP passwords are encrypted */
-extern int idle_time_limit;/* Shut down link if idle for this long */
-extern int holdoff; /* Dead time before restarting */
-extern bool holdoff_specified; /* true if user gave a holdoff value */
-extern bool notty; /* Stdin/out is not a tty */
-extern char *pty_socket; /* Socket to connect to pty */
-extern char *record_file; /* File to record chars sent/received */
-extern bool sync_serial; /* Device is synchronous serial device */
-extern int maxfail; /* Max # of unsuccessful connection attempts */
-extern char linkname[MAXPATHLEN]; /* logical name for link */
-extern bool tune_kernel; /* May alter kernel settings as necessary */
-extern int connect_delay; /* Time to delay after connect script */
-extern int max_data_rate; /* max bytes/sec through charshunt */
-extern int req_unit; /* interface unit number to use */
-extern bool multilink; /* enable multilink operation */
-extern bool noendpoint; /* don't send or accept endpt. discrim. */
-extern char *bundle_name; /* bundle name for multilink */
-extern bool dump_options; /* print out option values */
-extern bool dryrun; /* check everything, print options, exit */
-
-#ifdef PPP_FILTER
-extern struct bpf_program pass_filter; /* Filter for pkts to pass */
-extern struct bpf_program active_filter; /* Filter for link-active pkts */
-#endif
-
-#ifdef MSLANMAN
-extern bool ms_lanman; /* Use LanMan password instead of NT */
- /* Has meaning only with MS-CHAP challenges */
-#endif
-
-extern char *current_option; /* the name of the option being parsed */
-extern int privileged_option; /* set iff the current option came from root */
-extern char *option_source; /* string saying where the option came from */
-extern int option_priority; /* priority of current options */
-
-/*
- * Values for phase.
- */
-#define PHASE_DEAD 0
-#define PHASE_INITIALIZE 1
-#define PHASE_SERIALCONN 2
-#define PHASE_DORMANT 3
-#define PHASE_ESTABLISH 4
-#define PHASE_AUTHENTICATE 5
-#define PHASE_CALLBACK 6
-#define PHASE_NETWORK 7
-#define PHASE_RUNNING 8
-#define PHASE_TERMINATE 9
-#define PHASE_DISCONNECT 10
-#define PHASE_HOLDOFF 11
-
-/*
- * The following struct gives the addresses of procedures to call
- * for a particular protocol.
- */
-struct protent {
- u_short protocol; /* PPP protocol number */
- /* Initialization procedure */
- void (*init) __P((int unit));
- /* Process a received packet */
- void (*input) __P((int unit, u_char *pkt, int len));
- /* Process a received protocol-reject */
- void (*protrej) __P((int unit));
- /* Lower layer has come up */
- void (*lowerup) __P((int unit));
- /* Lower layer has gone down */
- void (*lowerdown) __P((int unit));
- /* Open the protocol */
- void (*open) __P((int unit));
- /* Close the protocol */
- void (*close) __P((int unit, char *reason));
- /* Print a packet in readable form */
- int (*printpkt) __P((u_char *pkt, int len,
- void (*printer) __P((void *, char *, ...)),
- void *arg));
- /* Process a received data packet */
- void (*datainput) __P((int unit, u_char *pkt, int len));
- bool enabled_flag; /* 0 iff protocol is disabled */
- char *name; /* Text name of protocol */
- char *data_name; /* Text name of corresponding data protocol */
- option_t *options; /* List of command-line options */
- /* Check requested options, assign defaults */
- void (*check_options) __P((void));
- /* Configure interface for demand-dial */
- int (*demand_conf) __P((int unit));
- /* Say whether to bring up link for this pkt */
- int (*active_pkt) __P((u_char *pkt, int len));
-};
-
-/* Table of pointers to supported protocols */
-extern struct protent *protocols[];
-
-/*
- * This struct contains pointers to a set of procedures for
- * doing operations on a "channel". A channel provides a way
- * to send and receive PPP packets - the canonical example is
- * a serial port device in PPP line discipline (or equivalently
- * with PPP STREAMS modules pushed onto it).
- */
-struct channel {
- /* set of options for this channel */
- option_t *options;
- /* find and process a per-channel options file */
- void (*process_extra_options) __P((void));
- /* check all the options that have been given */
- void (*check_options) __P((void));
- /* get the channel ready to do PPP, return a file descriptor */
- int (*connect) __P((void));
- /* we're finished with the channel */
- void (*disconnect) __P((void));
- /* put the channel into PPP `mode' */
- int (*establish_ppp) __P((int));
- /* take the channel out of PPP `mode', restore loopback if demand */
- void (*disestablish_ppp) __P((int));
- /* set the transmit-side PPP parameters of the channel */
- void (*send_config) __P((int, u_int32_t, int, int));
- /* set the receive-side PPP parameters of the channel */
- void (*recv_config) __P((int, u_int32_t, int, int));
- /* cleanup on error or normal exit */
- void (*cleanup) __P((void));
- /* close the device, called in children after fork */
- void (*close) __P((void));
-};
-
-extern struct channel *the_channel;
-
-#define ppp_send_config(unit, mtu, accm, pc, acc) \
-do { \
- if (the_channel->send_config) \
- (*the_channel->send_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-#define ppp_recv_config(unit, mtu, accm, pc, acc) \
-do { \
- if (the_channel->send_config) \
- (*the_channel->recv_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-/*
- * Prototypes.
- */
-
-/* Procedures exported from main.c. */
-void set_ifunit __P((int)); /* set stuff that depends on ifunit */
-void detach __P((void)); /* Detach from controlling tty */
-void die __P((int)); /* Cleanup and exit */
-void quit __P((void)); /* like die(1) */
-void novm __P((char *)); /* Say we ran out of memory, and die */
-void timeout __P((void (*func)(void *), void *arg, int s, int us));
- /* Call func(arg) after s.us seconds */
-void untimeout __P((void (*func)(void *), void *arg));
- /* Cancel call to func(arg) */
-void record_child __P((int, char *, void (*) (void *), void *));
-int device_script __P((char *cmd, int in, int out, int dont_wait));
- /* Run `cmd' with given stdin and stdout */
-pid_t run_program __P((char *prog, char **args, int must_exist,
- void (*done)(void *), void *arg));
- /* Run program prog with args in child */
-void reopen_log __P((void)); /* (re)open the connection to syslog */
-void update_link_stats __P((int)); /* Get stats at link termination */
-void script_setenv __P((char *, char *, int)); /* set script env var */
-void script_unsetenv __P((char *)); /* unset script env var */
-void new_phase __P((int)); /* signal start of new phase */
-void add_notifier __P((struct notifier **, notify_func, void *));
-void remove_notifier __P((struct notifier **, notify_func, void *));
-void notify __P((struct notifier *, int));
-
-/* Procedures exported from tty.c. */
-void tty_init __P((void));
-
-/* Procedures exported from utils.c. */
-void log_packet __P((u_char *, int, char *, int));
- /* Format a packet and log it with syslog */
-void print_string __P((char *, int, void (*) (void *, char *, ...),
- void *)); /* Format a string for output */
-int slprintf __P((char *, int, char *, ...)); /* sprintf++ */
-int vslprintf __P((char *, int, char *, va_list)); /* vsprintf++ */
-size_t strlcpy __P((char *, const char *, size_t)); /* safe strcpy */
-size_t strlcat __P((char *, const char *, size_t)); /* safe strncpy */
-void dbglog __P((char *, ...)); /* log a debug message */
-void info __P((char *, ...)); /* log an informational message */
-void notice __P((char *, ...)); /* log a notice-level message */
-void warn __P((char *, ...)); /* log a warning message */
-void error __P((char *, ...)); /* log an error message */
-void fatal __P((char *, ...)); /* log an error message and die(1) */
-void init_pr_log __P((char *, int)); /* initialize for using pr_log */
-void pr_log __P((void *, char *, ...)); /* printer fn, output to syslog */
-void end_pr_log __P((void)); /* finish up after using pr_log */
-
-/* Procedures exported from auth.c */
-void link_required __P((int)); /* we are starting to use the link */
-void link_terminated __P((int)); /* we are finished with the link */
-void link_down __P((int)); /* the LCP layer has left the Opened state */
-void link_established __P((int)); /* the link is up; authenticate now */
-void start_networks __P((void)); /* start all the network control protos */
-void np_up __P((int, int)); /* a network protocol has come up */
-void np_down __P((int, int)); /* a network protocol has gone down */
-void np_finished __P((int, int)); /* a network protocol no longer needs link */
-void auth_peer_fail __P((int, int));
- /* peer failed to authenticate itself */
-void auth_peer_success __P((int, int, char *, int));
- /* peer successfully authenticated itself */
-void auth_withpeer_fail __P((int, int));
- /* we failed to authenticate ourselves */
-void auth_withpeer_success __P((int, int));
- /* we successfully authenticated ourselves */
-void auth_check_options __P((void));
- /* check authentication options supplied */
-void auth_reset __P((int)); /* check what secrets we have */
-int check_passwd __P((int, char *, int, char *, int, char **));
- /* Check peer-supplied username/password */
-int get_secret __P((int, char *, char *, char *, int *, int));
- /* get "secret" for chap */
-int auth_ip_addr __P((int, u_int32_t));
- /* check if IP address is authorized */
-int bad_ip_adrs __P((u_int32_t));
- /* check if IP address is unreasonable */
-
-/* Procedures exported from demand.c */
-void demand_conf __P((void)); /* config interface(s) for demand-dial */
-void demand_block __P((void)); /* set all NPs to queue up packets */
-void demand_unblock __P((void)); /* set all NPs to pass packets */
-void demand_discard __P((void)); /* set all NPs to discard packets */
-void demand_rexmit __P((int)); /* retransmit saved frames for an NP */
-int loop_chars __P((unsigned char *, int)); /* process chars from loopback */
-int loop_frame __P((unsigned char *, int)); /* should we bring link up? */
-
-/* Procedures exported from multilink.c */
-void mp_check_options __P((void)); /* Check multilink-related options */
-int mp_join_bundle __P((void)); /* join our link to an appropriate bundle */
-char *epdisc_to_str __P((struct epdisc *)); /* string from endpoint discrim. */
-int str_to_epdisc __P((struct epdisc *, char *)); /* endpt disc. from str */
-
-/* Procedures exported from sys-*.c */
-void sys_init __P((void)); /* Do system-dependent initialization */
-void sys_cleanup __P((void)); /* Restore system state before exiting */
-int sys_check_options __P((void)); /* Check options specified */
-void sys_close __P((void)); /* Clean up in a child before execing */
-int ppp_available __P((void)); /* Test whether ppp kernel support exists */
-int get_pty __P((int *, int *, char *, int)); /* Get pty master/slave */
-int open_ppp_loopback __P((void)); /* Open loopback for demand-dialling */
-int tty_establish_ppp __P((int)); /* Turn serial port into a ppp interface */
-void tty_disestablish_ppp __P((int)); /* Restore port to normal operation */
-void make_new_bundle __P((int, int, int, int)); /* Create new bundle */
-int bundle_attach __P((int)); /* Attach link to existing bundle */
-void cfg_bundle __P((int, int, int, int)); /* Configure existing bundle */
-void clean_check __P((void)); /* Check if line was 8-bit clean */
-void set_up_tty __P((int, int)); /* Set up port's speed, parameters, etc. */
-void restore_tty __P((int)); /* Restore port's original parameters */
-void setdtr __P((int, int)); /* Raise or lower port's DTR line */
-void output __P((int, u_char *, int)); /* Output a PPP packet */
-void wait_input __P((struct timeval *));
- /* Wait for input, with timeout */
-void add_fd __P((int)); /* Add fd to set to wait for */
-void remove_fd __P((int)); /* Remove fd from set to wait for */
-int read_packet __P((u_char *)); /* Read PPP packet */
-int get_loop_output __P((void)); /* Read pkts from loopback */
-void tty_send_config __P((int, u_int32_t, int, int));
- /* Configure i/f transmit parameters */
-void tty_set_xaccm __P((ext_accm));
- /* Set extended transmit ACCM */
-void tty_recv_config __P((int, u_int32_t, int, int));
- /* Configure i/f receive parameters */
-int ccp_test __P((int, u_char *, int, int));
- /* Test support for compression scheme */
-void ccp_flags_set __P((int, int, int));
- /* Set kernel CCP state */
-int ccp_fatal_error __P((int)); /* Test for fatal decomp error in kernel */
-int get_idle_time __P((int, struct ppp_idle *));
- /* Find out how long link has been idle */
-int get_ppp_stats __P((int, struct pppd_stats *));
- /* Return link statistics */
-void netif_set_mtu __P((int, int)); /* Set PPP interface MTU */
-int sifvjcomp __P((int, int, int, int));
- /* Configure VJ TCP header compression */
-int sifup __P((int)); /* Configure i/f up for one protocol */
-int sifnpmode __P((int u, int proto, enum NPmode mode));
- /* Set mode for handling packets for proto */
-int sifdown __P((int)); /* Configure i/f down for one protocol */
-int sifaddr __P((int, u_int32_t, u_int32_t, u_int32_t));
- /* Configure IPv4 addresses for i/f */
-int cifaddr __P((int, u_int32_t, u_int32_t));
- /* Reset i/f IP addresses */
-#ifdef INET6
-int sif6addr __P((int, eui64_t, eui64_t));
- /* Configure IPv6 addresses for i/f */
-int cif6addr __P((int, eui64_t, eui64_t));
- /* Remove an IPv6 address from i/f */
-#endif
-int sifdefaultroute __P((int, u_int32_t, u_int32_t));
- /* Create default route through i/f */
-int cifdefaultroute __P((int, u_int32_t, u_int32_t));
- /* Delete default route through i/f */
-int sifproxyarp __P((int, u_int32_t));
- /* Add proxy ARP entry for peer */
-int cifproxyarp __P((int, u_int32_t));
- /* Delete proxy ARP entry for peer */
-u_int32_t GetMask __P((u_int32_t)); /* Get appropriate netmask for address */
-int lock __P((char *)); /* Create lock file for device */
-int relock __P((int)); /* Rewrite lock file with new pid */
-void unlock __P((void)); /* Delete previously-created lock file */
-int get_host_seed __P((void)); /* Get host-dependent random number seed */
-int have_route_to __P((u_int32_t)); /* Check if route to addr exists */
-#ifdef PPP_FILTER
-int set_filters __P((struct bpf_program *pass, struct bpf_program *active));
- /* Set filter programs in kernel */
-#endif
-#ifdef IPX_CHANGE
-int sipxfaddr __P((int, unsigned long, unsigned char *));
-int cipxfaddr __P((int));
-#endif
-int get_if_hwaddr __P((u_char *addr, char *name));
-char *get_first_ethernet __P((void));
-
-/* Procedures exported from options.c */
-int parse_args __P((int argc, char **argv));
- /* Parse options from arguments given */
-int options_from_file __P((char *filename, int must_exist, int check_prot,
- int privileged));
- /* Parse options from an options file */
-int options_from_user __P((void)); /* Parse options from user's .ppprc */
-int options_for_tty __P((void)); /* Parse options from /etc/ppp/options.tty */
-int options_from_list __P((struct wordlist *, int privileged));
- /* Parse options from a wordlist */
-int getword __P((FILE *f, char *word, int *newlinep, char *filename));
- /* Read a word from a file */
-void option_error __P((char *fmt, ...));
- /* Print an error message about an option */
-int int_option __P((char *, int *));
- /* Simplified number_option for decimal ints */
-void add_options __P((option_t *)); /* Add extra options */
-void check_options __P((void)); /* check values after all options parsed */
-int override_value __P((const char *, int, const char *));
- /* override value if permitted by priority */
-void print_options __P((void (*) __P((void *, char *, ...)), void *));
- /* print out values of all options */
-
-int parse_dotted_ip __P((char *, u_int32_t *));
-
-/*
- * Hooks to enable plugins to change various things.
- */
-extern int (*new_phase_hook) __P((int));
-extern int (*idle_time_hook) __P((struct ppp_idle *));
-extern int (*holdoff_hook) __P((void));
-extern int (*pap_check_hook) __P((void));
-extern int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
- struct wordlist **paddrs,
- struct wordlist **popts));
-extern void (*pap_logout_hook) __P((void));
-extern int (*pap_passwd_hook) __P((char *user, char *passwd));
-extern void (*ip_up_hook) __P((void));
-extern void (*ip_down_hook) __P((void));
-extern void (*ip_choose_hook) __P((u_int32_t *));
-
-/*
- * Inline versions of get/put char/short/long.
- * Pointer is advanced; we assume that both arguments
- * are lvalues and will already be in registers.
- * cp MUST be u_char *.
- */
-#define GETCHAR(c, cp) { \
- (c) = *(cp)++; \
-}
-#define PUTCHAR(c, cp) { \
- *(cp)++ = (u_char) (c); \
-}
-
-
-#define GETSHORT(s, cp) { \
- (s) = *(cp)++ << 8; \
- (s) |= *(cp)++; \
-}
-#define PUTSHORT(s, cp) { \
- *(cp)++ = (u_char) ((s) >> 8); \
- *(cp)++ = (u_char) (s); \
-}
-
-#define GETLONG(l, cp) { \
- (l) = *(cp)++ << 8; \
- (l) |= *(cp)++; (l) <<= 8; \
- (l) |= *(cp)++; (l) <<= 8; \
- (l) |= *(cp)++; \
-}
-#define PUTLONG(l, cp) { \
- *(cp)++ = (u_char) ((l) >> 24); \
- *(cp)++ = (u_char) ((l) >> 16); \
- *(cp)++ = (u_char) ((l) >> 8); \
- *(cp)++ = (u_char) (l); \
-}
-
-#define INCPTR(n, cp) ((cp) += (n))
-#define DECPTR(n, cp) ((cp) -= (n))
-
-/*
- * System dependent definitions for user-level 4.3BSD UNIX implementation.
- */
-
-#define TIMEOUT(r, f, t) timeout((r), (f), (t), 0)
-#define UNTIMEOUT(r, f) untimeout((r), (f))
-
-#define BCOPY(s, d, l) memcpy(d, s, l)
-#define BZERO(s, n) memset(s, 0, n)
-
-#define PRINTMSG(m, l) { info("Remote message: %0.*v", l, m); }
-
-/*
- * MAKEHEADER - Add Header fields to a packet.
- */
-#define MAKEHEADER(p, t) { \
- PUTCHAR(PPP_ALLSTATIONS, p); \
- PUTCHAR(PPP_UI, p); \
- PUTSHORT(t, p); }
-
-/*
- * Exit status values.
- */
-#define EXIT_OK 0
-#define EXIT_FATAL_ERROR 1
-#define EXIT_OPTION_ERROR 2
-#define EXIT_NOT_ROOT 3
-#define EXIT_NO_KERNEL_SUPPORT 4
-#define EXIT_USER_REQUEST 5
-#define EXIT_LOCK_FAILED 6
-#define EXIT_OPEN_FAILED 7
-#define EXIT_CONNECT_FAILED 8
-#define EXIT_PTYCMD_FAILED 9
-#define EXIT_NEGOTIATION_FAILED 10
-#define EXIT_PEER_AUTH_FAILED 11
-#define EXIT_IDLE_TIMEOUT 12
-#define EXIT_CONNECT_TIME 13
-#define EXIT_CALLBACK 14
-#define EXIT_PEER_DEAD 15
-#define EXIT_HANGUP 16
-#define EXIT_LOOPBACK 17
-#define EXIT_INIT_FAILED 18
-#define EXIT_AUTH_TOPEER_FAILED 19
-
-/*
- * Debug macros. Slightly useful for finding bugs in pppd, not particularly
- * useful for finding out why your connection isn't being established.
- */
-#ifdef DEBUGALL
-#define DEBUGMAIN 1
-#define DEBUGFSM 1
-#define DEBUGLCP 1
-#define DEBUGIPCP 1
-#define DEBUGIPV6CP 1
-#define DEBUGUPAP 1
-#define DEBUGCHAP 1
-#endif
-
-#ifndef LOG_PPP /* we use LOG_LOCAL2 for syslog by default */
-#if defined(DEBUGMAIN) || defined(DEBUGFSM) || defined(DEBUGSYS) \
- || defined(DEBUGLCP) || defined(DEBUGIPCP) || defined(DEBUGUPAP) \
- || defined(DEBUGCHAP) || defined(DEBUG) || defined(DEBUGIPV6CP)
-#define LOG_PPP LOG_LOCAL2
-#else
-#define LOG_PPP LOG_DAEMON
-#endif
-#endif /* LOG_PPP */
-
-#ifdef DEBUGMAIN
-#define MAINDEBUG(x) if (debug) dbglog x
-#else
-#define MAINDEBUG(x)
-#endif
-
-#ifdef DEBUGSYS
-#define SYSDEBUG(x) if (debug) dbglog x
-#else
-#define SYSDEBUG(x)
-#endif
-
-#ifdef DEBUGFSM
-#define FSMDEBUG(x) if (debug) dbglog x
-#else
-#define FSMDEBUG(x)
-#endif
-
-#ifdef DEBUGLCP
-#define LCPDEBUG(x) if (debug) dbglog x
-#else
-#define LCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPCP
-#define IPCPDEBUG(x) if (debug) dbglog x
-#else
-#define IPCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPV6CP
-#define IPV6CPDEBUG(x) if (debug) dbglog x
-#else
-#define IPV6CPDEBUG(x)
-#endif
-
-#ifdef DEBUGUPAP
-#define UPAPDEBUG(x) if (debug) dbglog x
-#else
-#define UPAPDEBUG(x)
-#endif
-
-#ifdef DEBUGCHAP
-#define CHAPDEBUG(x) if (debug) dbglog x
-#else
-#define CHAPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPXCP
-#define IPXCPDEBUG(x) if (debug) dbglog x
-#else
-#define IPXCPDEBUG(x)
-#endif
-
-#ifndef SIGTYPE
-#if defined(sun) || defined(SYSV) || defined(POSIX_SOURCE)
-#define SIGTYPE void
-#else
-#define SIGTYPE int
-#endif /* defined(sun) || defined(SYSV) || defined(POSIX_SOURCE) */
-#endif /* SIGTYPE */
-
-#ifndef MIN
-#define MIN(a, b) ((a) < (b)? (a): (b))
-#endif
-#ifndef MAX
-#define MAX(a, b) ((a) > (b)? (a): (b))
-#endif
-
-#endif /* __PPP_H__ */
diff --git a/mdk-stage1/ppp/pppd/pppd.h.wtmp b/mdk-stage1/ppp/pppd/pppd.h.wtmp
deleted file mode 100644
index 4d440be06..000000000
--- a/mdk-stage1/ppp/pppd/pppd.h.wtmp
+++ /dev/null
@@ -1,789 +0,0 @@
-/*
- * pppd.h - PPP daemon global declarations.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * TODO:
- */
-
-#ifndef __PPPD_H__
-#define __PPPD_H__
-
-#include <stdio.h> /* for FILE */
-#include <limits.h> /* for NGROUPS_MAX */
-#include <sys/param.h> /* for MAXPATHLEN and BSD4_4, if defined */
-#include <sys/types.h> /* for u_int32_t, if defined */
-#include <sys/time.h> /* for struct timeval */
-#include <net/ppp_defs.h>
-#include "patchlevel.h"
-
-#if defined(__STDC__)
-#include <stdarg.h>
-#define __V(x) x
-#else
-#include <varargs.h>
-#define __V(x) (va_alist) va_dcl
-#define const
-#define volatile
-#endif
-
-#ifdef INET6
-#include "eui64.h"
-#endif
-
-/*
- * Limits.
- */
-
-#define NUM_PPP 1 /* One PPP interface supported (per process) */
-#define MAXWORDLEN 1024 /* max length of word in file (incl null) */
-#define MAXARGS 1 /* max # args to a command */
-#define MAXNAMELEN 256 /* max length of hostname or name for auth */
-#define MAXSECRETLEN 256 /* max length of password or secret */
-
-/*
- * Option descriptor structure.
- */
-
-typedef unsigned char bool;
-
-enum opt_type {
- o_special_noarg = 0,
- o_special = 1,
- o_bool,
- o_int,
- o_uint32,
- o_string,
- o_wild,
-};
-
-typedef struct {
- char *name; /* name of the option */
- enum opt_type type;
- void *addr;
- char *description;
- int flags;
- void *addr2;
- int upper_limit;
- int lower_limit;
- const char *source;
- short int priority;
- short int winner;
-} option_t;
-
-/* Values for flags */
-#define OPT_VALUE 0xff /* mask for presupplied value */
-#define OPT_HEX 0x100 /* int option is in hex */
-#define OPT_NOARG 0x200 /* option doesn't take argument */
-#define OPT_OR 0x400 /* OR in argument to value */
-#define OPT_INC 0x800 /* increment value */
-#define OPT_PRIV 0x1000 /* privileged option */
-#define OPT_STATIC 0x2000 /* string option goes into static array */
-#define OPT_LLIMIT 0x4000 /* check value against lower limit */
-#define OPT_ULIMIT 0x8000 /* check value against upper limit */
-#define OPT_LIMITS (OPT_LLIMIT|OPT_ULIMIT)
-#define OPT_ZEROOK 0x10000 /* 0 value is OK even if not within limits */
-#define OPT_HIDE 0x10000 /* for o_string, print value as ?????? */
-#define OPT_A2LIST 0x10000 /* for o_special, keep list of values */
-#define OPT_NOINCR 0x20000 /* value mustn't be increased */
-#define OPT_ZEROINF 0x40000 /* with OPT_NOINCR, 0 == infinity */
-#define OPT_PRIO 0x80000 /* process option priorities for this option */
-#define OPT_PRIOSUB 0x100000 /* subsidiary member of priority group */
-#define OPT_ALIAS 0x200000 /* option is alias for previous option */
-#define OPT_A2COPY 0x400000 /* addr2 -> second location to rcv value */
-#define OPT_ENABLE 0x800000 /* use *addr2 as enable for option */
-#define OPT_A2CLR 0x1000000 /* clear *(bool *)addr2 */
-#define OPT_PRIVFIX 0x2000000 /* user can't override if set by root */
-#define OPT_INITONLY 0x4000000 /* option can only be set in init phase */
-#define OPT_DEVEQUIV 0x8000000 /* equiv to device name */
-#define OPT_DEVNAM (OPT_INITONLY | OPT_DEVEQUIV)
-#define OPT_A2PRINTER 0x10000000 /* *addr2 is a fn for printing option */
-#define OPT_A2STRVAL 0x20000000 /* *addr2 points to current string value */
-#define OPT_NOPRINT 0x40000000 /* don't print this option at all */
-
-#define OPT_VAL(x) ((x) & OPT_VALUE)
-
-/* Values for priority */
-#define OPRIO_DEFAULT 0 /* a default value */
-#define OPRIO_CFGFILE 1 /* value from a configuration file */
-#define OPRIO_CMDLINE 2 /* value from the command line */
-#define OPRIO_SECFILE 3 /* value from options in a secrets file */
-#define OPRIO_ROOT 100 /* added to priority if OPT_PRIVFIX && root */
-
-#ifndef GIDSET_TYPE
-#define GIDSET_TYPE gid_t
-#endif
-
-/* Structure representing a list of permitted IP addresses. */
-struct permitted_ip {
- int permit; /* 1 = permit, 0 = forbid */
- u_int32_t base; /* match if (addr & mask) == base */
- u_int32_t mask; /* base and mask are in network byte order */
-};
-
-/*
- * Unfortunately, the linux kernel driver uses a different structure
- * for statistics from the rest of the ports.
- * This structure serves as a common representation for the bits
- * pppd needs.
- */
-struct pppd_stats {
- unsigned int bytes_in;
- unsigned int bytes_out;
-};
-
-/* Used for storing a sequence of words. Usually malloced. */
-struct wordlist {
- struct wordlist *next;
- char *word;
-};
-
-/* An endpoint discriminator, used with multilink. */
-#define MAX_ENDP_LEN 20 /* maximum length of discriminator value */
-struct epdisc {
- unsigned char class;
- unsigned char length;
- unsigned char value[MAX_ENDP_LEN];
-};
-
-/* values for epdisc.class */
-#define EPD_NULL 0 /* null discriminator, no data */
-#define EPD_LOCAL 1
-#define EPD_IP 2
-#define EPD_MAC 3
-#define EPD_MAGIC 4
-#define EPD_PHONENUM 5
-
-typedef void (*notify_func) __P((void *, int));
-
-struct notifier {
- struct notifier *next;
- notify_func func;
- void *arg;
-};
-
-/*
- * Global variables.
- */
-
-extern int hungup; /* Physical layer has disconnected */
-extern int ifunit; /* Interface unit number */
-extern char ifname[]; /* Interface name */
-extern char hostname[]; /* Our hostname */
-extern u_char outpacket_buf[]; /* Buffer for outgoing packets */
-extern int phase; /* Current state of link - see values below */
-extern int baud_rate; /* Current link speed in bits/sec */
-extern char *progname; /* Name of this program */
-extern int redirect_stderr;/* Connector's stderr should go to file */
-extern char peer_authname[];/* Authenticated name of peer */
-extern int privileged; /* We were run by real-uid root */
-extern int need_holdoff; /* Need holdoff period after link terminates */
-extern char **script_env; /* Environment variables for scripts */
-extern int detached; /* Have detached from controlling tty */
-extern GIDSET_TYPE groups[NGROUPS_MAX]; /* groups the user is in */
-extern int ngroups; /* How many groups valid in groups */
-extern struct pppd_stats link_stats; /* byte/packet counts etc. for link */
-extern int link_stats_valid; /* set if link_stats is valid */
-extern int link_connect_time; /* time the link was up for */
-extern int using_pty; /* using pty as device (notty or pty opt.) */
-extern int log_to_fd; /* logging to this fd as well as syslog */
-extern bool log_default; /* log_to_fd is default (stdout) */
-extern char *no_ppp_msg; /* message to print if ppp not in kernel */
-extern volatile int status; /* exit status for pppd */
-extern bool devnam_fixed; /* can no longer change devnam */
-extern int unsuccess; /* # unsuccessful connection attempts */
-extern int do_callback; /* set if we want to do callback next */
-extern int doing_callback; /* set if this is a callback */
-extern char ppp_devnam[MAXPATHLEN];
-extern struct notifier *pidchange; /* for notifications of pid changing */
-extern struct notifier *phasechange; /* for notifications of phase changes */
-extern struct notifier *exitnotify; /* for notification that we're exiting */
-extern struct notifier *sigreceived; /* notification of received signal */
-extern int listen_time; /* time to listen first (ms) */
-
-/* Values for do_callback and doing_callback */
-#define CALLBACK_DIALIN 1 /* we are expecting the call back */
-#define CALLBACK_DIALOUT 2 /* we are dialling out to call back */
-
-/*
- * Variables set by command-line options.
- */
-
-extern int debug; /* Debug flag */
-extern int kdebugflag; /* Tell kernel to print debug messages */
-extern int default_device; /* Using /dev/tty or equivalent */
-extern char devnam[MAXPATHLEN]; /* Device name */
-extern int crtscts; /* Use hardware flow control */
-extern bool modem; /* Use modem control lines */
-extern int inspeed; /* Input/Output speed requested */
-extern u_int32_t netmask; /* IP netmask to set on interface */
-extern bool lockflag; /* Create lock file to lock the serial dev */
-extern bool nodetach; /* Don't detach from controlling tty */
-extern bool updetach; /* Detach from controlling tty when link up */
-extern char *initializer; /* Script to initialize physical link */
-extern char *connect_script; /* Script to establish physical link */
-extern char *disconnect_script; /* Script to disestablish physical link */
-extern char *welcomer; /* Script to welcome client after connection */
-extern char *ptycommand; /* Command to run on other side of pty */
-extern int maxconnect; /* Maximum connect time (seconds) */
-extern char user[MAXNAMELEN];/* Our name for authenticating ourselves */
-extern char passwd[MAXSECRETLEN]; /* Password for PAP or CHAP */
-extern bool auth_required; /* Peer is required to authenticate */
-extern bool persist; /* Reopen link after it goes down */
-extern bool uselogin; /* Use /etc/passwd for checking PAP */
-extern char our_name[MAXNAMELEN];/* Our name for authentication purposes */
-extern char remote_name[MAXNAMELEN]; /* Peer's name for authentication */
-extern bool explicit_remote;/* remote_name specified with remotename opt */
-extern bool demand; /* Do dial-on-demand */
-extern char *ipparam; /* Extra parameter for ip up/down scripts */
-extern bool cryptpap; /* Others' PAP passwords are encrypted */
-extern int idle_time_limit;/* Shut down link if idle for this long */
-extern int holdoff; /* Dead time before restarting */
-extern bool holdoff_specified; /* true if user gave a holdoff value */
-extern bool notty; /* Stdin/out is not a tty */
-extern char *pty_socket; /* Socket to connect to pty */
-extern char *record_file; /* File to record chars sent/received */
-extern bool sync_serial; /* Device is synchronous serial device */
-extern int maxfail; /* Max # of unsuccessful connection attempts */
-extern char linkname[MAXPATHLEN]; /* logical name for link */
-extern bool tune_kernel; /* May alter kernel settings as necessary */
-extern int connect_delay; /* Time to delay after connect script */
-extern int max_data_rate; /* max bytes/sec through charshunt */
-extern int req_unit; /* interface unit number to use */
-extern bool multilink; /* enable multilink operation */
-extern bool noendpoint; /* don't send or accept endpt. discrim. */
-extern char *bundle_name; /* bundle name for multilink */
-extern bool dump_options; /* print out option values */
-extern bool dryrun; /* check everything, print options, exit */
-
-#ifdef PPP_FILTER
-extern struct bpf_program pass_filter; /* Filter for pkts to pass */
-extern struct bpf_program active_filter; /* Filter for link-active pkts */
-#endif
-
-#ifdef MSLANMAN
-extern bool ms_lanman; /* Use LanMan password instead of NT */
- /* Has meaning only with MS-CHAP challenges */
-#endif
-
-extern char *current_option; /* the name of the option being parsed */
-extern int privileged_option; /* set iff the current option came from root */
-extern char *option_source; /* string saying where the option came from */
-extern int option_priority; /* priority of current options */
-
-/*
- * Values for phase.
- */
-#define PHASE_DEAD 0
-#define PHASE_INITIALIZE 1
-#define PHASE_SERIALCONN 2
-#define PHASE_DORMANT 3
-#define PHASE_ESTABLISH 4
-#define PHASE_AUTHENTICATE 5
-#define PHASE_CALLBACK 6
-#define PHASE_NETWORK 7
-#define PHASE_RUNNING 8
-#define PHASE_TERMINATE 9
-#define PHASE_DISCONNECT 10
-#define PHASE_HOLDOFF 11
-
-/*
- * The following struct gives the addresses of procedures to call
- * for a particular protocol.
- */
-struct protent {
- u_short protocol; /* PPP protocol number */
- /* Initialization procedure */
- void (*init) __P((int unit));
- /* Process a received packet */
- void (*input) __P((int unit, u_char *pkt, int len));
- /* Process a received protocol-reject */
- void (*protrej) __P((int unit));
- /* Lower layer has come up */
- void (*lowerup) __P((int unit));
- /* Lower layer has gone down */
- void (*lowerdown) __P((int unit));
- /* Open the protocol */
- void (*open) __P((int unit));
- /* Close the protocol */
- void (*close) __P((int unit, char *reason));
- /* Print a packet in readable form */
- int (*printpkt) __P((u_char *pkt, int len,
- void (*printer) __P((void *, char *, ...)),
- void *arg));
- /* Process a received data packet */
- void (*datainput) __P((int unit, u_char *pkt, int len));
- bool enabled_flag; /* 0 iff protocol is disabled */
- char *name; /* Text name of protocol */
- char *data_name; /* Text name of corresponding data protocol */
- option_t *options; /* List of command-line options */
- /* Check requested options, assign defaults */
- void (*check_options) __P((void));
- /* Configure interface for demand-dial */
- int (*demand_conf) __P((int unit));
- /* Say whether to bring up link for this pkt */
- int (*active_pkt) __P((u_char *pkt, int len));
-};
-
-/* Table of pointers to supported protocols */
-extern struct protent *protocols[];
-
-/*
- * This struct contains pointers to a set of procedures for
- * doing operations on a "channel". A channel provides a way
- * to send and receive PPP packets - the canonical example is
- * a serial port device in PPP line discipline (or equivalently
- * with PPP STREAMS modules pushed onto it).
- */
-struct channel {
- /* set of options for this channel */
- option_t *options;
- /* find and process a per-channel options file */
- void (*process_extra_options) __P((void));
- /* check all the options that have been given */
- void (*check_options) __P((void));
- /* get the channel ready to do PPP, return a file descriptor */
- int (*connect) __P((void));
- /* we're finished with the channel */
- void (*disconnect) __P((void));
- /* put the channel into PPP `mode' */
- int (*establish_ppp) __P((int));
- /* take the channel out of PPP `mode', restore loopback if demand */
- void (*disestablish_ppp) __P((int));
- /* set the transmit-side PPP parameters of the channel */
- void (*send_config) __P((int, u_int32_t, int, int));
- /* set the receive-side PPP parameters of the channel */
- void (*recv_config) __P((int, u_int32_t, int, int));
- /* cleanup on error or normal exit */
- void (*cleanup) __P((void));
- /* close the device, called in children after fork */
- void (*close) __P((void));
-};
-
-extern struct channel *the_channel;
-
-#define ppp_send_config(unit, mtu, accm, pc, acc) \
-do { \
- if (the_channel->send_config) \
- (*the_channel->send_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-#define ppp_recv_config(unit, mtu, accm, pc, acc) \
-do { \
- if (the_channel->send_config) \
- (*the_channel->recv_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-/*
- * Prototypes.
- */
-
-/* Procedures exported from main.c. */
-void set_ifunit __P((int)); /* set stuff that depends on ifunit */
-void detach __P((void)); /* Detach from controlling tty */
-void die __P((int)); /* Cleanup and exit */
-void quit __P((void)); /* like die(1) */
-void novm __P((char *)); /* Say we ran out of memory, and die */
-void timeout __P((void (*func)(void *), void *arg, int s, int us));
- /* Call func(arg) after s.us seconds */
-void untimeout __P((void (*func)(void *), void *arg));
- /* Cancel call to func(arg) */
-void record_child __P((int, char *, void (*) (void *), void *));
-int device_script __P((char *cmd, int in, int out, int dont_wait));
- /* Run `cmd' with given stdin and stdout */
-pid_t run_program __P((char *prog, char **args, int must_exist,
- void (*done)(void *), void *arg));
- /* Run program prog with args in child */
-void reopen_log __P((void)); /* (re)open the connection to syslog */
-void update_link_stats __P((int)); /* Get stats at link termination */
-void script_setenv __P((char *, char *, int)); /* set script env var */
-void script_unsetenv __P((char *)); /* unset script env var */
-void new_phase __P((int)); /* signal start of new phase */
-void add_notifier __P((struct notifier **, notify_func, void *));
-void remove_notifier __P((struct notifier **, notify_func, void *));
-void notify __P((struct notifier *, int));
-
-/* Procedures exported from tty.c. */
-void tty_init __P((void));
-
-/* Procedures exported from utils.c. */
-void log_packet __P((u_char *, int, char *, int));
- /* Format a packet and log it with syslog */
-void print_string __P((char *, int, void (*) (void *, char *, ...),
- void *)); /* Format a string for output */
-int slprintf __P((char *, int, char *, ...)); /* sprintf++ */
-int vslprintf __P((char *, int, char *, va_list)); /* vsprintf++ */
-size_t strlcpy __P((char *, const char *, size_t)); /* safe strcpy */
-size_t strlcat __P((char *, const char *, size_t)); /* safe strncpy */
-void dbglog __P((char *, ...)); /* log a debug message */
-void info __P((char *, ...)); /* log an informational message */
-void notice __P((char *, ...)); /* log a notice-level message */
-void warn __P((char *, ...)); /* log a warning message */
-void error __P((char *, ...)); /* log an error message */
-void fatal __P((char *, ...)); /* log an error message and die(1) */
-void init_pr_log __P((char *, int)); /* initialize for using pr_log */
-void pr_log __P((void *, char *, ...)); /* printer fn, output to syslog */
-void end_pr_log __P((void)); /* finish up after using pr_log */
-
-/* Procedures exported from auth.c */
-void link_required __P((int)); /* we are starting to use the link */
-void link_terminated __P((int)); /* we are finished with the link */
-void link_down __P((int)); /* the LCP layer has left the Opened state */
-void link_established __P((int)); /* the link is up; authenticate now */
-void start_networks __P((void)); /* start all the network control protos */
-void np_up __P((int, int)); /* a network protocol has come up */
-void np_down __P((int, int)); /* a network protocol has gone down */
-void np_finished __P((int, int)); /* a network protocol no longer needs link */
-void auth_peer_fail __P((int, int));
- /* peer failed to authenticate itself */
-void auth_peer_success __P((int, int, char *, int));
- /* peer successfully authenticated itself */
-void auth_withpeer_fail __P((int, int));
- /* we failed to authenticate ourselves */
-void auth_withpeer_success __P((int, int));
- /* we successfully authenticated ourselves */
-void auth_check_options __P((void));
- /* check authentication options supplied */
-void auth_reset __P((int)); /* check what secrets we have */
-int check_passwd __P((int, char *, int, char *, int, char **));
- /* Check peer-supplied username/password */
-int get_secret __P((int, char *, char *, char *, int *, int));
- /* get "secret" for chap */
-int auth_ip_addr __P((int, u_int32_t));
- /* check if IP address is authorized */
-int bad_ip_adrs __P((u_int32_t));
- /* check if IP address is unreasonable */
-
-/* Procedures exported from demand.c */
-void demand_conf __P((void)); /* config interface(s) for demand-dial */
-void demand_block __P((void)); /* set all NPs to queue up packets */
-void demand_unblock __P((void)); /* set all NPs to pass packets */
-void demand_discard __P((void)); /* set all NPs to discard packets */
-void demand_rexmit __P((int)); /* retransmit saved frames for an NP */
-int loop_chars __P((unsigned char *, int)); /* process chars from loopback */
-int loop_frame __P((unsigned char *, int)); /* should we bring link up? */
-
-/* Procedures exported from multilink.c */
-void mp_check_options __P((void)); /* Check multilink-related options */
-int mp_join_bundle __P((void)); /* join our link to an appropriate bundle */
-char *epdisc_to_str __P((struct epdisc *)); /* string from endpoint discrim. */
-int str_to_epdisc __P((struct epdisc *, char *)); /* endpt disc. from str */
-
-/* Procedures exported from sys-*.c */
-void sys_init __P((void)); /* Do system-dependent initialization */
-void sys_cleanup __P((void)); /* Restore system state before exiting */
-int sys_check_options __P((void)); /* Check options specified */
-void sys_close __P((void)); /* Clean up in a child before execing */
-int ppp_available __P((void)); /* Test whether ppp kernel support exists */
-int get_pty __P((int *, int *, char *, int)); /* Get pty master/slave */
-int open_ppp_loopback __P((void)); /* Open loopback for demand-dialling */
-int tty_establish_ppp __P((int)); /* Turn serial port into a ppp interface */
-void tty_disestablish_ppp __P((int)); /* Restore port to normal operation */
-void make_new_bundle __P((int, int, int, int)); /* Create new bundle */
-int bundle_attach __P((int)); /* Attach link to existing bundle */
-void cfg_bundle __P((int, int, int, int)); /* Configure existing bundle */
-void clean_check __P((void)); /* Check if line was 8-bit clean */
-void set_up_tty __P((int, int)); /* Set up port's speed, parameters, etc. */
-void restore_tty __P((int)); /* Restore port's original parameters */
-void setdtr __P((int, int)); /* Raise or lower port's DTR line */
-void output __P((int, u_char *, int)); /* Output a PPP packet */
-void wait_input __P((struct timeval *));
- /* Wait for input, with timeout */
-void add_fd __P((int)); /* Add fd to set to wait for */
-void remove_fd __P((int)); /* Remove fd from set to wait for */
-int read_packet __P((u_char *)); /* Read PPP packet */
-int get_loop_output __P((void)); /* Read pkts from loopback */
-void tty_send_config __P((int, u_int32_t, int, int));
- /* Configure i/f transmit parameters */
-void tty_set_xaccm __P((ext_accm));
- /* Set extended transmit ACCM */
-void tty_recv_config __P((int, u_int32_t, int, int));
- /* Configure i/f receive parameters */
-int ccp_test __P((int, u_char *, int, int));
- /* Test support for compression scheme */
-void ccp_flags_set __P((int, int, int));
- /* Set kernel CCP state */
-int ccp_fatal_error __P((int)); /* Test for fatal decomp error in kernel */
-int get_idle_time __P((int, struct ppp_idle *));
- /* Find out how long link has been idle */
-int get_ppp_stats __P((int, struct pppd_stats *));
- /* Return link statistics */
-void netif_set_mtu __P((int, int)); /* Set PPP interface MTU */
-int sifvjcomp __P((int, int, int, int));
- /* Configure VJ TCP header compression */
-int sifup __P((int)); /* Configure i/f up for one protocol */
-int sifnpmode __P((int u, int proto, enum NPmode mode));
- /* Set mode for handling packets for proto */
-int sifdown __P((int)); /* Configure i/f down for one protocol */
-int sifaddr __P((int, u_int32_t, u_int32_t, u_int32_t));
- /* Configure IPv4 addresses for i/f */
-int cifaddr __P((int, u_int32_t, u_int32_t));
- /* Reset i/f IP addresses */
-#ifdef INET6
-int sif6addr __P((int, eui64_t, eui64_t));
- /* Configure IPv6 addresses for i/f */
-int cif6addr __P((int, eui64_t, eui64_t));
- /* Remove an IPv6 address from i/f */
-#endif
-int sifdefaultroute __P((int, u_int32_t, u_int32_t));
- /* Create default route through i/f */
-int cifdefaultroute __P((int, u_int32_t, u_int32_t));
- /* Delete default route through i/f */
-int sifproxyarp __P((int, u_int32_t));
- /* Add proxy ARP entry for peer */
-int cifproxyarp __P((int, u_int32_t));
- /* Delete proxy ARP entry for peer */
-u_int32_t GetMask __P((u_int32_t)); /* Get appropriate netmask for address */
-int lock __P((char *)); /* Create lock file for device */
-int relock __P((int)); /* Rewrite lock file with new pid */
-void unlock __P((void)); /* Delete previously-created lock file */
-void logwtmp __P((const char *, const char *, const char *));
- /* Write entry to wtmp file */
-int get_host_seed __P((void)); /* Get host-dependent random number seed */
-int have_route_to __P((u_int32_t)); /* Check if route to addr exists */
-#ifdef PPP_FILTER
-int set_filters __P((struct bpf_program *pass, struct bpf_program *active));
- /* Set filter programs in kernel */
-#endif
-#ifdef IPX_CHANGE
-int sipxfaddr __P((int, unsigned long, unsigned char *));
-int cipxfaddr __P((int));
-#endif
-int get_if_hwaddr __P((u_char *addr, char *name));
-char *get_first_ethernet __P((void));
-
-/* Procedures exported from options.c */
-int parse_args __P((int argc, char **argv));
- /* Parse options from arguments given */
-int options_from_file __P((char *filename, int must_exist, int check_prot,
- int privileged));
- /* Parse options from an options file */
-int options_from_user __P((void)); /* Parse options from user's .ppprc */
-int options_for_tty __P((void)); /* Parse options from /etc/ppp/options.tty */
-int options_from_list __P((struct wordlist *, int privileged));
- /* Parse options from a wordlist */
-int getword __P((FILE *f, char *word, int *newlinep, char *filename));
- /* Read a word from a file */
-void option_error __P((char *fmt, ...));
- /* Print an error message about an option */
-int int_option __P((char *, int *));
- /* Simplified number_option for decimal ints */
-void add_options __P((option_t *)); /* Add extra options */
-void check_options __P((void)); /* check values after all options parsed */
-int override_value __P((const char *, int, const char *));
- /* override value if permitted by priority */
-void print_options __P((void (*) __P((void *, char *, ...)), void *));
- /* print out values of all options */
-
-int parse_dotted_ip __P((char *, u_int32_t *));
-
-/*
- * Hooks to enable plugins to change various things.
- */
-extern int (*new_phase_hook) __P((int));
-extern int (*idle_time_hook) __P((struct ppp_idle *));
-extern int (*holdoff_hook) __P((void));
-extern int (*pap_check_hook) __P((void));
-extern int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
- struct wordlist **paddrs,
- struct wordlist **popts));
-extern void (*pap_logout_hook) __P((void));
-extern int (*pap_passwd_hook) __P((char *user, char *passwd));
-extern void (*ip_up_hook) __P((void));
-extern void (*ip_down_hook) __P((void));
-extern void (*ip_choose_hook) __P((u_int32_t *));
-
-/*
- * Inline versions of get/put char/short/long.
- * Pointer is advanced; we assume that both arguments
- * are lvalues and will already be in registers.
- * cp MUST be u_char *.
- */
-#define GETCHAR(c, cp) { \
- (c) = *(cp)++; \
-}
-#define PUTCHAR(c, cp) { \
- *(cp)++ = (u_char) (c); \
-}
-
-
-#define GETSHORT(s, cp) { \
- (s) = *(cp)++ << 8; \
- (s) |= *(cp)++; \
-}
-#define PUTSHORT(s, cp) { \
- *(cp)++ = (u_char) ((s) >> 8); \
- *(cp)++ = (u_char) (s); \
-}
-
-#define GETLONG(l, cp) { \
- (l) = *(cp)++ << 8; \
- (l) |= *(cp)++; (l) <<= 8; \
- (l) |= *(cp)++; (l) <<= 8; \
- (l) |= *(cp)++; \
-}
-#define PUTLONG(l, cp) { \
- *(cp)++ = (u_char) ((l) >> 24); \
- *(cp)++ = (u_char) ((l) >> 16); \
- *(cp)++ = (u_char) ((l) >> 8); \
- *(cp)++ = (u_char) (l); \
-}
-
-#define INCPTR(n, cp) ((cp) += (n))
-#define DECPTR(n, cp) ((cp) -= (n))
-
-/*
- * System dependent definitions for user-level 4.3BSD UNIX implementation.
- */
-
-#define TIMEOUT(r, f, t) timeout((r), (f), (t), 0)
-#define UNTIMEOUT(r, f) untimeout((r), (f))
-
-#define BCOPY(s, d, l) memcpy(d, s, l)
-#define BZERO(s, n) memset(s, 0, n)
-
-#define PRINTMSG(m, l) { info("Remote message: %0.*v", l, m); }
-
-/*
- * MAKEHEADER - Add Header fields to a packet.
- */
-#define MAKEHEADER(p, t) { \
- PUTCHAR(PPP_ALLSTATIONS, p); \
- PUTCHAR(PPP_UI, p); \
- PUTSHORT(t, p); }
-
-/*
- * Exit status values.
- */
-#define EXIT_OK 0
-#define EXIT_FATAL_ERROR 1
-#define EXIT_OPTION_ERROR 2
-#define EXIT_NOT_ROOT 3
-#define EXIT_NO_KERNEL_SUPPORT 4
-#define EXIT_USER_REQUEST 5
-#define EXIT_LOCK_FAILED 6
-#define EXIT_OPEN_FAILED 7
-#define EXIT_CONNECT_FAILED 8
-#define EXIT_PTYCMD_FAILED 9
-#define EXIT_NEGOTIATION_FAILED 10
-#define EXIT_PEER_AUTH_FAILED 11
-#define EXIT_IDLE_TIMEOUT 12
-#define EXIT_CONNECT_TIME 13
-#define EXIT_CALLBACK 14
-#define EXIT_PEER_DEAD 15
-#define EXIT_HANGUP 16
-#define EXIT_LOOPBACK 17
-#define EXIT_INIT_FAILED 18
-#define EXIT_AUTH_TOPEER_FAILED 19
-
-/*
- * Debug macros. Slightly useful for finding bugs in pppd, not particularly
- * useful for finding out why your connection isn't being established.
- */
-#ifdef DEBUGALL
-#define DEBUGMAIN 1
-#define DEBUGFSM 1
-#define DEBUGLCP 1
-#define DEBUGIPCP 1
-#define DEBUGIPV6CP 1
-#define DEBUGUPAP 1
-#define DEBUGCHAP 1
-#endif
-
-#ifndef LOG_PPP /* we use LOG_LOCAL2 for syslog by default */
-#if defined(DEBUGMAIN) || defined(DEBUGFSM) || defined(DEBUGSYS) \
- || defined(DEBUGLCP) || defined(DEBUGIPCP) || defined(DEBUGUPAP) \
- || defined(DEBUGCHAP) || defined(DEBUG) || defined(DEBUGIPV6CP)
-#define LOG_PPP LOG_LOCAL2
-#else
-#define LOG_PPP LOG_DAEMON
-#endif
-#endif /* LOG_PPP */
-
-#ifdef DEBUGMAIN
-#define MAINDEBUG(x) if (debug) dbglog x
-#else
-#define MAINDEBUG(x)
-#endif
-
-#ifdef DEBUGSYS
-#define SYSDEBUG(x) if (debug) dbglog x
-#else
-#define SYSDEBUG(x)
-#endif
-
-#ifdef DEBUGFSM
-#define FSMDEBUG(x) if (debug) dbglog x
-#else
-#define FSMDEBUG(x)
-#endif
-
-#ifdef DEBUGLCP
-#define LCPDEBUG(x) if (debug) dbglog x
-#else
-#define LCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPCP
-#define IPCPDEBUG(x) if (debug) dbglog x
-#else
-#define IPCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPV6CP
-#define IPV6CPDEBUG(x) if (debug) dbglog x
-#else
-#define IPV6CPDEBUG(x)
-#endif
-
-#ifdef DEBUGUPAP
-#define UPAPDEBUG(x) if (debug) dbglog x
-#else
-#define UPAPDEBUG(x)
-#endif
-
-#ifdef DEBUGCHAP
-#define CHAPDEBUG(x) if (debug) dbglog x
-#else
-#define CHAPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPXCP
-#define IPXCPDEBUG(x) if (debug) dbglog x
-#else
-#define IPXCPDEBUG(x)
-#endif
-
-#ifndef SIGTYPE
-#if defined(sun) || defined(SYSV) || defined(POSIX_SOURCE)
-#define SIGTYPE void
-#else
-#define SIGTYPE int
-#endif /* defined(sun) || defined(SYSV) || defined(POSIX_SOURCE) */
-#endif /* SIGTYPE */
-
-#ifndef MIN
-#define MIN(a, b) ((a) < (b)? (a): (b))
-#endif
-#ifndef MAX
-#define MAX(a, b) ((a) > (b)? (a): (b))
-#endif
-
-#endif /* __PPP_H__ */
diff --git a/mdk-stage1/ppp/pppd/sys-linux.c b/mdk-stage1/ppp/pppd/sys-linux.c
deleted file mode 100644
index d341bb3de..000000000
--- a/mdk-stage1/ppp/pppd/sys-linux.c
+++ /dev/null
@@ -1,2672 +0,0 @@
-/*
- * sys-linux.c - System-dependent procedures for setting up
- * PPP interfaces on Linux systems
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/errno.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/sysmacros.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <string.h>
-#include <time.h>
-#include <memory.h>
-#include <utmp.h>
-#include <mntent.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <termios.h>
-#include <unistd.h>
-
-/* This is in netdevice.h. However, this compile will fail miserably if
- you attempt to include netdevice.h because it has so many references
- to __memcpy functions which it should not attempt to do. So, since I
- really don't use it, but it must be defined, define it now. */
-
-#ifndef MAX_ADDR_LEN
-#define MAX_ADDR_LEN 7
-#endif
-
-#if __GLIBC__ >= 2
-#include <asm/types.h> /* glibc 2 conflicts with linux/types.h */
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/route.h>
-#include <netinet/if_ether.h>
-#else
-#include <linux/types.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/route.h>
-#include <linux/if_ether.h>
-#endif
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-
-#ifdef IPX_CHANGE
-#include "ipxcp.h"
-#if __GLIBC__ >= 2 && \
- !(defined(__powerpc__) && __GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-#include <netipx/ipx.h>
-#else
-#include <linux/ipx.h>
-#endif
-#endif /* IPX_CHANGE */
-
-#ifdef PPP_FILTER
-#include <net/bpf.h>
-#include <linux/filter.h>
-#endif /* PPP_FILTER */
-
-#ifdef LOCKLIB
-#include <sys/locks.h>
-#endif
-
-#ifdef INET6
-#ifndef _LINUX_IN6_H
-/*
- * This is in linux/include/net/ipv6.h.
- */
-
-struct in6_ifreq {
- struct in6_addr ifr6_addr;
- __u32 ifr6_prefixlen;
- unsigned int ifr6_ifindex;
-};
-#endif
-
-#define IN6_LLADDR_FROM_EUI64(sin6, eui64) do { \
- memset(&sin6.s6_addr, 0, sizeof(struct in6_addr)); \
- sin6.s6_addr16[0] = htons(0xfe80); \
- eui64_copy(eui64, sin6.s6_addr32[2]); \
- } while (0)
-
-#endif /* INET6 */
-
-/* We can get an EIO error on an ioctl if the modem has hung up */
-#define ok_error(num) ((num)==EIO)
-
-static int tty_disc = N_TTY; /* The TTY discipline */
-static int ppp_disc = N_PPP; /* The PPP discpline */
-static int initfdflags = -1; /* Initial file descriptor flags for fd */
-static int ppp_fd = -1; /* fd which is set to PPP discipline */
-static int sock_fd = -1; /* socket for doing interface ioctls */
-static int slave_fd = -1;
-static int master_fd = -1;
-#ifdef INET6
-static int sock6_fd = -1;
-#endif /* INET6 */
-static int ppp_dev_fd = -1; /* fd for /dev/ppp (new style driver) */
-static int chindex; /* channel index (new style driver) */
-
-static fd_set in_fds; /* set of fds that wait_input waits for */
-static int max_in_fd; /* highest fd set in in_fds */
-
-static int has_proxy_arp = 0;
-static int driver_version = 0;
-static int driver_modification = 0;
-static int driver_patch = 0;
-static int driver_is_old = 0;
-static int restore_term = 0; /* 1 => we've munged the terminal */
-static struct termios inittermios; /* Initial TTY termios */
-
-static int new_style_driver = 0;
-
-static char loop_name[20];
-static unsigned char inbuf[512]; /* buffer for chars read from loopback */
-
-static int if_is_up; /* Interface has been marked up */
-static u_int32_t default_route_gateway; /* Gateway for default route added */
-static u_int32_t proxy_arp_addr; /* Addr for proxy arp entry added */
-static char proxy_arp_dev[16]; /* Device for proxy arp entry */
-static u_int32_t our_old_addr; /* for detecting address changes */
-static int dynaddr_set; /* 1 if ip_dynaddr set */
-static int looped; /* 1 if using loop */
-static int link_mtu; /* mtu for the link (not bundle) */
-
-static struct utsname utsname; /* for the kernel version */
-static int kernel_version;
-#define KVERSION(j,n,p) ((j)*1000000 + (n)*1000 + (p))
-
-#define MAX_IFS 100
-
-#define FLAGS_GOOD (IFF_UP | IFF_BROADCAST)
-#define FLAGS_MASK (IFF_UP | IFF_BROADCAST | \
- IFF_POINTOPOINT | IFF_LOOPBACK | IFF_NOARP)
-
-#define SIN_ADDR(x) (((struct sockaddr_in *) (&(x)))->sin_addr.s_addr)
-
-/* Prototypes for procedures local to this file. */
-static int get_flags (int fd);
-static void set_flags (int fd, int flags);
-static int translate_speed (int bps);
-static int baud_rate_of (int speed);
-static void close_route_table (void);
-static int open_route_table (void);
-static int read_route_table (struct rtentry *rt);
-static int defaultroute_exists (struct rtentry *rt);
-static int get_ether_addr (u_int32_t ipaddr, struct sockaddr *hwaddr,
- char *name, int namelen);
-static void decode_version (char *buf, int *version, int *mod, int *patch);
-static int set_kdebugflag(int level);
-static int ppp_registered(void);
-static int make_ppp_unit(void);
-static void restore_loop(void); /* Transfer ppp unit back to loopback */
-
-extern u_char inpacket_buf[]; /* borrowed from main.c */
-
-/*
- * SET_SA_FAMILY - set the sa_family field of a struct sockaddr,
- * if it exists.
- */
-
-#define SET_SA_FAMILY(addr, family) \
- memset ((char *) &(addr), '\0', sizeof(addr)); \
- addr.sa_family = (family);
-
-/*
- * Determine if the PPP connection should still be present.
- */
-
-extern int hungup;
-
-/* new_fd is the fd of a tty */
-static void set_ppp_fd (int new_fd)
-{
- SYSDEBUG ((LOG_DEBUG, "setting ppp_fd to %d\n", new_fd));
- ppp_fd = new_fd;
- if (!new_style_driver)
- ppp_dev_fd = new_fd;
-}
-
-static int still_ppp(void)
-{
- if (new_style_driver)
- return !hungup && ppp_fd >= 0;
- if (!hungup || ppp_fd == slave_fd)
- return 1;
- if (slave_fd >= 0) {
- set_ppp_fd(slave_fd);
- return 1;
- }
- return 0;
-}
-
-/********************************************************************
- *
- * Functions to read and set the flags value in the device driver
- */
-
-static int get_flags (int fd)
-{
- int flags;
-
- if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &flags) < 0) {
- if ( ok_error (errno) )
- flags = 0;
- else
- fatal("ioctl(PPPIOCGFLAGS): %m");
- }
-
- SYSDEBUG ((LOG_DEBUG, "get flags = %x\n", flags));
- return flags;
-}
-
-/********************************************************************/
-
-static void set_flags (int fd, int flags)
-{
- SYSDEBUG ((LOG_DEBUG, "set flags = %x\n", flags));
-
- if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &flags) < 0) {
- if (! ok_error (errno) )
- fatal("ioctl(PPPIOCSFLAGS, %x): %m", flags, errno);
- }
-}
-
-/********************************************************************
- *
- * sys_init - System-dependent initialization.
- */
-
-void sys_init(void)
-{
- int flags;
-
- if (new_style_driver) {
- ppp_dev_fd = open("/dev/ppp", O_RDWR);
- if (ppp_dev_fd < 0)
- fatal("Couldn't open /dev/ppp: %m");
- flags = fcntl(ppp_dev_fd, F_GETFL);
- if (flags == -1
- || fcntl(ppp_dev_fd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("Couldn't set /dev/ppp to nonblock: %m");
- }
-
- /* Get an internet socket for doing socket ioctls. */
- sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
- if (sock_fd < 0)
- fatal("Couldn't create IP socket: %m(%d)", errno);
-
-#ifdef INET6
- sock6_fd = socket(AF_INET6, SOCK_DGRAM, 0);
- if (sock6_fd < 0)
- sock6_fd = -errno; /* save errno for later */
-#endif
-
- FD_ZERO(&in_fds);
- max_in_fd = 0;
-}
-
-/********************************************************************
- *
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This shouldn't call die() because it's called from die().
- */
-
-void sys_cleanup(void)
-{
-/*
- * Take down the device
- */
- if (if_is_up) {
- if_is_up = 0;
- sifdown(0);
- }
-/*
- * Delete any routes through the device.
- */
- if (default_route_gateway != 0)
- cifdefaultroute(0, 0, default_route_gateway);
-
- if (has_proxy_arp)
- cifproxyarp(0, proxy_arp_addr);
-}
-
-/********************************************************************
- *
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close(void)
-{
- if (new_style_driver)
- close(ppp_dev_fd);
- if (sock_fd >= 0)
- close(sock_fd);
- if (slave_fd >= 0)
- close(slave_fd);
- if (master_fd >= 0)
- close(master_fd);
- closelog();
-}
-
-/********************************************************************
- *
- * set_kdebugflag - Define the debugging level for the kernel
- */
-
-static int set_kdebugflag (int requested_level)
-{
- if (new_style_driver && ifunit < 0)
- return 1;
- if (ioctl(ppp_dev_fd, PPPIOCSDEBUG, &requested_level) < 0) {
- if ( ! ok_error (errno) )
- error("ioctl(PPPIOCSDEBUG): %m");
- return (0);
- }
- SYSDEBUG ((LOG_INFO, "set kernel debugging level to %d",
- requested_level));
- return (1);
-}
-
-/********************************************************************
- *
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-
-int tty_establish_ppp (int tty_fd)
-{
- int x;
- int fd = -1;
-
-/*
- * Ensure that the tty device is in exclusive mode.
- */
- if (ioctl(tty_fd, TIOCEXCL, 0) < 0) {
- if ( ! ok_error ( errno ))
- warn("Couldn't make tty exclusive: %m");
- }
-/*
- * Demand mode - prime the old ppp device to relinquish the unit.
- */
- if (!new_style_driver && looped
- && ioctl(slave_fd, PPPIOCXFERUNIT, 0) < 0) {
- error("ioctl(transfer ppp unit): %m");
- return -1;
- }
-/*
- * Set the current tty to the PPP discpline
- */
-
-#ifndef N_SYNC_PPP
-#define N_SYNC_PPP 14
-#endif
- ppp_disc = (new_style_driver && sync_serial)? N_SYNC_PPP: N_PPP;
- if (ioctl(tty_fd, TIOCSETD, &ppp_disc) < 0) {
- if ( ! ok_error (errno) ) {
- error("Couldn't set tty to PPP discipline: %m");
- return -1;
- }
- }
-
- if (new_style_driver) {
- /* Open another instance of /dev/ppp and connect the channel to it */
- int flags;
-
- if (ioctl(tty_fd, PPPIOCGCHAN, &chindex) == -1) {
- error("Couldn't get channel number: %m");
- goto err;
- }
- dbglog("using channel %d", chindex);
- fd = open("/dev/ppp", O_RDWR);
- if (fd < 0) {
- error("Couldn't reopen /dev/ppp: %m");
- goto err;
- }
- if (ioctl(fd, PPPIOCATTCHAN, &chindex) < 0) {
- error("Couldn't attach to channel %d: %m", chindex);
- goto err_close;
- }
- flags = fcntl(fd, F_GETFL);
- if (flags == -1 || fcntl(fd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("Couldn't set /dev/ppp (channel) to nonblock: %m");
- set_ppp_fd(fd);
-
- if (!looped)
- ifunit = -1;
- if (!looped && !multilink) {
- /*
- * Create a new PPP unit.
- */
- if (make_ppp_unit() < 0)
- goto err_close;
- }
-
- if (looped)
- set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) & ~SC_LOOP_TRAFFIC);
-
- if (!multilink) {
- add_fd(ppp_dev_fd);
- if (ioctl(fd, PPPIOCCONNECT, &ifunit) < 0) {
- error("Couldn't attach to PPP unit %d: %m", ifunit);
- goto err_close;
- }
- }
-
- } else {
- /*
- * Old-style driver: find out which interface we were given.
- */
- set_ppp_fd (tty_fd);
- if (ioctl(tty_fd, PPPIOCGUNIT, &x) < 0) {
- if (ok_error (errno))
- goto err;
- fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
- }
- /* Check that we got the same unit again. */
- if (looped && x != ifunit)
- fatal("transfer_ppp failed: wanted unit %d, got %d", ifunit, x);
- ifunit = x;
-
- /*
- * Fetch the initial file flags and reset blocking mode on the file.
- */
- initfdflags = fcntl(tty_fd, F_GETFL);
- if (initfdflags == -1 ||
- fcntl(tty_fd, F_SETFL, initfdflags | O_NONBLOCK) == -1) {
- if ( ! ok_error (errno))
- warn("Couldn't set device to non-blocking mode: %m");
- }
- }
-
- looped = 0;
-
- /*
- * Enable debug in the driver if requested.
- */
- if (!looped)
- set_kdebugflag (kdebugflag);
-
-#define SC_RCVB (SC_RCV_B7_0 | SC_RCV_B7_1 | SC_RCV_EVNP | SC_RCV_ODDP)
-#define SC_LOGB (SC_DEBUG | SC_LOG_INPKT | SC_LOG_OUTPKT | SC_LOG_RAWIN \
- | SC_LOG_FLUSH)
-
- set_flags(ppp_fd, ((get_flags(ppp_fd) & ~(SC_RCVB | SC_LOGB))
- | ((kdebugflag * SC_DEBUG) & SC_LOGB)));
-
- SYSDEBUG ((LOG_NOTICE, "Using version %d.%d.%d of PPP driver",
- driver_version, driver_modification, driver_patch));
-
- return ppp_fd;
-
- err_close:
- close(fd);
- err:
- if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0 && !ok_error(errno))
- warn("Couldn't reset tty to normal line discipline: %m");
- return -1;
-}
-
-/********************************************************************
- *
- * tty_disestablish_ppp - Restore the serial port to normal operation,
- * and reconnect the ppp unit to the loopback if in demand mode.
- * This shouldn't call die() because it's called from die().
- */
-
-void tty_disestablish_ppp(int tty_fd)
-{
- if (demand)
- restore_loop();
- if (!hungup) {
-/*
- * Flush the tty output buffer so that the TIOCSETD doesn't hang.
- */
- if (tcflush(tty_fd, TCIOFLUSH) < 0)
- warn("tcflush failed: %m");
-/*
- * Restore the previous line discipline
- */
- if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0) {
- if ( ! ok_error (errno))
- error("ioctl(TIOCSETD, N_TTY): %m");
- }
-
- if (ioctl(tty_fd, TIOCNXCL, 0) < 0) {
- if ( ! ok_error (errno))
- warn("ioctl(TIOCNXCL): %m(%d)", errno);
- }
-
- /* Reset non-blocking mode on fd. */
- if (initfdflags != -1 && fcntl(tty_fd, F_SETFL, initfdflags) < 0) {
- if ( ! ok_error (errno))
- warn("Couldn't restore device fd flags: %m");
- }
- }
- initfdflags = -1;
-
- if (new_style_driver) {
- close(ppp_fd);
- ppp_fd = -1;
- if (!looped && ifunit >= 0 && ioctl(ppp_dev_fd, PPPIOCDETACH) < 0)
- error("Couldn't release PPP unit: %m");
- if (!multilink)
- remove_fd(ppp_dev_fd);
- }
-}
-
-/*
- * make_ppp_unit - make a new ppp unit for ppp_dev_fd.
- * Assumes new_style_driver.
- */
-static int make_ppp_unit()
-{
- int x;
-
- ifunit = req_unit;
- x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
- if (x < 0 && req_unit >= 0 && errno == EEXIST) {
- warn("Couldn't allocate PPP unit %d as it is already in use");
- ifunit = -1;
- x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
- }
- if (x < 0)
- error("Couldn't create new ppp unit: %m");
- return x;
-}
-
-/*
- * cfg_bundle - configure the existing bundle.
- * Used in demand mode.
- */
-void cfg_bundle(int mrru, int mtru, int rssn, int tssn)
-{
- int flags;
-
- if (!new_style_driver)
- return;
-
- /* set the mrru, mtu and flags */
- if (ioctl(ppp_dev_fd, PPPIOCSMRRU, &mrru) < 0)
- error("Couldn't set MRRU: %m");
- flags = get_flags(ppp_dev_fd);
- flags &= ~(SC_MP_SHORTSEQ | SC_MP_XSHORTSEQ);
- flags |= (rssn? SC_MP_SHORTSEQ: 0) | (tssn? SC_MP_XSHORTSEQ: 0)
- | (mrru? SC_MULTILINK: 0);
-
- set_flags(ppp_dev_fd, flags);
-
- /* connect up the channel */
- if (ioctl(ppp_fd, PPPIOCCONNECT, &ifunit) < 0)
- fatal("Couldn't attach to PPP unit %d: %m", ifunit);
- add_fd(ppp_dev_fd);
-}
-
-/*
- * make_new_bundle - create a new PPP unit (i.e. a bundle)
- * and connect our channel to it. This should only get called
- * if `multilink' was set at the time establish_ppp was called.
- * In demand mode this uses our existing bundle instead of making
- * a new one.
- */
-void make_new_bundle(int mrru, int mtru, int rssn, int tssn)
-{
- if (!new_style_driver)
- return;
-
- /* make us a ppp unit */
- if (make_ppp_unit() < 0)
- die(1);
-
- /* set the mrru and flags */
- cfg_bundle(mrru, mtru, rssn, tssn);
-}
-
-/*
- * bundle_attach - attach our link to a given PPP unit.
- * We assume the unit is controlled by another pppd.
- */
-int bundle_attach(int ifnum)
-{
- if (!new_style_driver)
- return -1;
-
- if (ioctl(ppp_dev_fd, PPPIOCATTACH, &ifnum) < 0) {
- if (errno == ENXIO)
- return 0; /* doesn't still exist */
- fatal("Couldn't attach to interface unit %d: %m\n", ifnum);
- }
- if (ioctl(ppp_fd, PPPIOCCONNECT, &ifnum) < 0)
- fatal("Couldn't connect to interface unit %d: %m", ifnum);
- set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_MULTILINK);
-
- ifunit = ifnum;
- return 1;
-}
-
-/********************************************************************
- *
- * clean_check - Fetch the flags for the device and generate
- * appropriate error messages.
- */
-void clean_check(void)
-{
- int x;
- char *s;
-
- if (still_ppp()) {
- if (ioctl(ppp_fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
- s = NULL;
- switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
- case SC_RCV_B7_0:
- s = "all had bit 7 set to 1";
- break;
-
- case SC_RCV_B7_1:
- s = "all had bit 7 set to 0";
- break;
-
- case SC_RCV_EVNP:
- s = "all had odd parity";
- break;
-
- case SC_RCV_ODDP:
- s = "all had even parity";
- break;
- }
-
- if (s != NULL) {
- warn("Receive serial link is not 8-bit clean:");
- warn("Problem: %s", s);
- }
- }
- }
-}
-
-
-/*
- * List of valid speeds.
- */
-
-struct speed {
- int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
- { 50, B50 },
-#endif
-#ifdef B75
- { 75, B75 },
-#endif
-#ifdef B110
- { 110, B110 },
-#endif
-#ifdef B134
- { 134, B134 },
-#endif
-#ifdef B150
- { 150, B150 },
-#endif
-#ifdef B200
- { 200, B200 },
-#endif
-#ifdef B300
- { 300, B300 },
-#endif
-#ifdef B600
- { 600, B600 },
-#endif
-#ifdef B1200
- { 1200, B1200 },
-#endif
-#ifdef B1800
- { 1800, B1800 },
-#endif
-#ifdef B2000
- { 2000, B2000 },
-#endif
-#ifdef B2400
- { 2400, B2400 },
-#endif
-#ifdef B3600
- { 3600, B3600 },
-#endif
-#ifdef B4800
- { 4800, B4800 },
-#endif
-#ifdef B7200
- { 7200, B7200 },
-#endif
-#ifdef B9600
- { 9600, B9600 },
-#endif
-#ifdef B19200
- { 19200, B19200 },
-#endif
-#ifdef B38400
- { 38400, B38400 },
-#endif
-#ifdef B57600
- { 57600, B57600 },
-#endif
-#ifdef B76800
- { 76800, B76800 },
-#endif
-#ifdef B115200
- { 115200, B115200 },
-#endif
-#ifdef EXTA
- { 19200, EXTA },
-#endif
-#ifdef EXTB
- { 38400, EXTB },
-#endif
-#ifdef B230400
- { 230400, B230400 },
-#endif
-#ifdef B460800
- { 460800, B460800 },
-#endif
-#ifdef B921600
- { 921600, B921600 },
-#endif
- { 0, 0 }
-};
-
-/********************************************************************
- *
- * Translate from bits/second to a speed_t.
- */
-
-static int translate_speed (int bps)
-{
- struct speed *speedp;
-
- if (bps != 0) {
- for (speedp = speeds; speedp->speed_int; speedp++) {
- if (bps == speedp->speed_int)
- return speedp->speed_val;
- }
- warn("speed %d not supported", bps);
- }
- return 0;
-}
-
-/********************************************************************
- *
- * Translate from a speed_t to bits/second.
- */
-
-static int baud_rate_of (int speed)
-{
- struct speed *speedp;
-
- if (speed != 0) {
- for (speedp = speeds; speedp->speed_int; speedp++) {
- if (speed == speedp->speed_val)
- return speedp->speed_int;
- }
- }
- return 0;
-}
-
-/********************************************************************
- *
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc. If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-
-void set_up_tty(int tty_fd, int local)
-{
- int speed;
- struct termios tios;
-
- setdtr(tty_fd, 1);
- if (tcgetattr(tty_fd, &tios) < 0) {
- if (!ok_error(errno))
- fatal("tcgetattr: %m(%d)", errno);
- return;
- }
-
- if (!restore_term)
- inittermios = tios;
-
- tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
- tios.c_cflag |= CS8 | CREAD | HUPCL;
-
- tios.c_iflag = IGNBRK | IGNPAR;
- tios.c_oflag = 0;
- tios.c_lflag = 0;
- tios.c_cc[VMIN] = 1;
- tios.c_cc[VTIME] = 0;
-
- if (local || !modem)
- tios.c_cflag ^= (CLOCAL | HUPCL);
-
- switch (crtscts) {
- case 1:
- tios.c_cflag |= CRTSCTS;
- break;
-
- case -2:
- tios.c_iflag |= IXON | IXOFF;
- tios.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */
- tios.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */
- break;
-
- case -1:
- tios.c_cflag &= ~CRTSCTS;
- break;
-
- default:
- break;
- }
-
- speed = translate_speed(inspeed);
- if (speed) {
- cfsetospeed (&tios, speed);
- cfsetispeed (&tios, speed);
- }
-/*
- * We can't proceed if the serial port speed is B0,
- * since that implies that the serial port is disabled.
- */
- else {
- speed = cfgetospeed(&tios);
- if (speed == B0)
- fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
- }
-
- if (tcsetattr(tty_fd, TCSAFLUSH, &tios) < 0)
- if (!ok_error(errno))
- fatal("tcsetattr: %m");
-
- baud_rate = baud_rate_of(speed);
- restore_term = 1;
-}
-
-/********************************************************************
- *
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-
-void setdtr (int tty_fd, int on)
-{
- int modembits = TIOCM_DTR;
-
- ioctl(tty_fd, (on ? TIOCMBIS : TIOCMBIC), &modembits);
-}
-
-/********************************************************************
- *
- * restore_tty - restore the terminal to the saved settings.
- */
-
-void restore_tty (int tty_fd)
-{
- if (restore_term) {
- restore_term = 0;
-/*
- * Turn off echoing, because otherwise we can get into
- * a loop with the tty and the modem echoing to each other.
- * We presume we are the sole user of this tty device, so
- * when we close it, it will revert to its defaults anyway.
- */
- if (!default_device)
- inittermios.c_lflag &= ~(ECHO | ECHONL);
-
- if (tcsetattr(tty_fd, TCSAFLUSH, &inittermios) < 0) {
- if (! ok_error (errno))
- warn("tcsetattr: %m");
- }
- }
-}
-
-/********************************************************************
- *
- * output - Output PPP packet.
- */
-
-void output (int unit, unsigned char *p, int len)
-{
- int fd = ppp_fd;
- int proto;
-
- if (debug)
- dbglog("sent %P", p, len);
-
- if (len < PPP_HDRLEN)
- return;
- if (new_style_driver) {
- p += 2;
- len -= 2;
- proto = (p[0] << 8) + p[1];
- if (ifunit >= 0 && !(proto >= 0xc000 || proto == PPP_CCPFRAG))
- fd = ppp_dev_fd;
- }
- if (write(fd, p, len) < 0) {
- if (errno == EWOULDBLOCK || errno == ENOBUFS
- || errno == ENXIO || errno == EIO || errno == EINTR)
- warn("write: warning: %m (%d)", errno);
- else
- error("write: %m (%d)", errno);
- }
-}
-
-/********************************************************************
- *
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-
-void wait_input(struct timeval *timo)
-{
- fd_set ready, exc;
- int n;
-
- ready = in_fds;
- exc = in_fds;
- n = select(max_in_fd + 1, &ready, NULL, &exc, timo);
- if (n < 0 && errno != EINTR)
- fatal("select: %m(%d)", errno);
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(int fd)
-{
- FD_SET(fd, &in_fds);
- if (fd > max_in_fd)
- max_in_fd = fd;
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(int fd)
-{
- FD_CLR(fd, &in_fds);
-}
-
-
-/********************************************************************
- *
- * read_packet - get a PPP packet from the serial device.
- */
-
-int read_packet (unsigned char *buf)
-{
- int len, nr;
-
- len = PPP_MRU + PPP_HDRLEN;
- if (new_style_driver) {
- *buf++ = PPP_ALLSTATIONS;
- *buf++ = PPP_UI;
- len -= 2;
- }
- nr = -1;
- if (ppp_fd >= 0) {
- nr = read(ppp_fd, buf, len);
- if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
- error("read: %m");
- if (nr < 0 && errno == ENXIO)
- return 0;
- }
- if (nr < 0 && new_style_driver && ifunit >= 0) {
- /* N.B. we read ppp_fd first since LCP packets come in there. */
- nr = read(ppp_dev_fd, buf, len);
- if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
- error("read /dev/ppp: %m");
- if (nr < 0 && errno == ENXIO)
- return 0;
- }
- return (new_style_driver && nr > 0)? nr+2: nr;
-}
-
-/********************************************************************
- *
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output(void)
-{
- int rv = 0;
- int n;
-
- if (new_style_driver) {
- while ((n = read_packet(inpacket_buf)) > 0)
- if (loop_frame(inpacket_buf, n))
- rv = 1;
- return rv;
- }
-
- while ((n = read(master_fd, inbuf, sizeof(inbuf))) > 0)
- if (loop_chars(inbuf, n))
- rv = 1;
-
- if (n == 0)
- fatal("eof on loopback");
-
- if (errno != EWOULDBLOCK)
- fatal("read from loopback: %m(%d)", errno);
-
- return rv;
-}
-
-/*
- * netif_set_mtu - set the MTU on the PPP network interface.
- */
-void
-netif_set_mtu(int unit, int mtu)
-{
- struct ifreq ifr;
-
- SYSDEBUG ((LOG_DEBUG, "netif_set_mtu: mtu = %d\n", mtu));
-
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
- ifr.ifr_mtu = mtu;
-
- if (ifunit >= 0 && ioctl(sock_fd, SIOCSIFMTU, (caddr_t) &ifr) < 0)
- fatal("ioctl(SIOCSIFMTU): %m");
-}
-
-/********************************************************************
- *
- * tty_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-
-void tty_send_config (int mtu,u_int32_t asyncmap,int pcomp,int accomp)
-{
- u_int x;
-
-/*
- * Set the asyncmap and other parameters for the ppp device
- */
- if (!still_ppp())
- return;
- link_mtu = mtu;
- SYSDEBUG ((LOG_DEBUG, "send_config: asyncmap = %lx\n", asyncmap));
- if (ioctl(ppp_fd, PPPIOCSASYNCMAP, (caddr_t) &asyncmap) < 0) {
- if (!ok_error(errno))
- fatal("ioctl(PPPIOCSASYNCMAP): %m(%d)", errno);
- return;
- }
-
- x = get_flags(ppp_fd);
- x = pcomp ? x | SC_COMP_PROT : x & ~SC_COMP_PROT;
- x = accomp ? x | SC_COMP_AC : x & ~SC_COMP_AC;
- x = sync_serial ? x | SC_SYNC : x & ~SC_SYNC;
- set_flags(ppp_fd, x);
-}
-
-/********************************************************************
- *
- * tty_set_xaccm - set the extended transmit ACCM for the interface.
- */
-
-void tty_set_xaccm (ext_accm accm)
-{
- SYSDEBUG ((LOG_DEBUG, "set_xaccm: %08lx %08lx %08lx %08lx\n",
- accm[0], accm[1], accm[2], accm[3]));
-
- if (!still_ppp())
- return;
- if (ioctl(ppp_fd, PPPIOCSXASYNCMAP, accm) < 0 && errno != ENOTTY) {
- if ( ! ok_error (errno))
- warn("ioctl(set extended ACCM): %m(%d)", errno);
- }
-}
-
-/********************************************************************
- *
- * tty_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-
-void tty_recv_config (int mru,u_int32_t asyncmap,int pcomp,int accomp)
-{
- SYSDEBUG ((LOG_DEBUG, "recv_config: mru = %d\n", mru));
-/*
- * If we were called because the link has gone down then there is nothing
- * which may be done. Just return without incident.
- */
- if (!still_ppp())
- return;
-/*
- * Set the receiver parameters
- */
- if (ioctl(ppp_fd, PPPIOCSMRU, (caddr_t) &mru) < 0) {
- if ( ! ok_error (errno))
- error("ioctl(PPPIOCSMRU): %m(%d)", errno);
- }
- if (new_style_driver && ifunit >= 0
- && ioctl(ppp_dev_fd, PPPIOCSMRU, (caddr_t) &mru) < 0)
- error("Couldn't set MRU in generic PPP layer: %m");
-
- SYSDEBUG ((LOG_DEBUG, "recv_config: asyncmap = %lx\n", asyncmap));
- if (ioctl(ppp_fd, PPPIOCSRASYNCMAP, (caddr_t) &asyncmap) < 0) {
- if (!ok_error(errno))
- error("ioctl(PPPIOCSRASYNCMAP): %m(%d)", errno);
- }
-}
-
-/********************************************************************
- *
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-
-int ccp_test (int unit, u_char *opt_ptr, int opt_len, int for_transmit)
-{
- struct ppp_option_data data;
-
- memset (&data, '\0', sizeof (data));
- data.ptr = opt_ptr;
- data.length = opt_len;
- data.transmit = for_transmit;
-
- if (ioctl(ppp_dev_fd, PPPIOCSCOMPRESS, (caddr_t) &data) >= 0)
- return 1;
-
- return (errno == ENOBUFS)? 0: -1;
-}
-
-/********************************************************************
- *
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-
-void ccp_flags_set (int unit, int isopen, int isup)
-{
- if (still_ppp()) {
- int x = get_flags(ppp_dev_fd);
- x = isopen? x | SC_CCP_OPEN : x &~ SC_CCP_OPEN;
- x = isup? x | SC_CCP_UP : x &~ SC_CCP_UP;
- set_flags (ppp_dev_fd, x);
- }
-}
-
-#ifdef PPP_FILTER
-/*
- * set_filters - set the active and pass filters in the kernel driver.
- */
-int set_filters(struct bpf_program *pass, struct bpf_program *active)
-{
- struct sock_fprog fp;
-
- fp.len = pass->bf_len;
- fp.filter = (struct sock_filter *) pass->bf_insns;
- if (ioctl(ppp_dev_fd, PPPIOCSPASS, &fp) < 0) {
- if (errno == ENOTTY)
- warn("kernel does not support PPP filtering");
- else
- error("Couldn't set pass-filter in kernel: %m");
- return 0;
- }
- fp.len = active->bf_len;
- fp.filter = (struct sock_filter *) active->bf_insns;
- if (ioctl(ppp_dev_fd, PPPIOCSACTIVE, &fp) < 0) {
- error("Couldn't set active-filter in kernel: %m");
- return 0;
- }
- return 1;
-}
-#endif /* PPP_FILTER */
-
-/********************************************************************
- *
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
- int u;
- struct ppp_idle *ip;
-{
- return ioctl(ppp_dev_fd, PPPIOCGIDLE, ip) >= 0;
-}
-
-/********************************************************************
- *
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
- int u;
- struct pppd_stats *stats;
-{
- struct ifpppstatsreq req;
-
- memset (&req, 0, sizeof (req));
-
- req.stats_ptr = (caddr_t) &req.stats;
- strlcpy(req.ifr__name, ifname, sizeof(req.ifr__name));
- if (ioctl(sock_fd, SIOCGPPPSTATS, &req) < 0) {
- error("Couldn't get PPP statistics: %m");
- return 0;
- }
- stats->bytes_in = req.stats.p.ppp_ibytes;
- stats->bytes_out = req.stats.p.ppp_obytes;
- return 1;
-}
-
-/********************************************************************
- *
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise. This is necessary because of patent nonsense.
- */
-
-int ccp_fatal_error (int unit)
-{
- int x = get_flags(ppp_dev_fd);
-
- return x & SC_DC_FERROR;
-}
-
-/********************************************************************
- *
- * path_to_procfs - find the path to the proc file system mount point
- */
-static char proc_path[MAXPATHLEN];
-static int proc_path_len;
-
-static char *path_to_procfs(const char *tail)
-{
- struct mntent *mntent;
- FILE *fp;
-
- if (proc_path_len == 0) {
- /* Default the mount location of /proc */
- strlcpy (proc_path, "/proc", sizeof(proc_path));
- proc_path_len = 5;
- fp = fopen(MOUNTED, "r");
- if (fp != NULL) {
- while ((mntent = getmntent(fp)) != NULL) {
- if (strcmp(mntent->mnt_type, MNTTYPE_IGNORE) == 0)
- continue;
- if (strcmp(mntent->mnt_type, "proc") == 0) {
- strlcpy(proc_path, mntent->mnt_dir, sizeof(proc_path));
- proc_path_len = strlen(proc_path);
- break;
- }
- }
- fclose (fp);
- }
- }
-
- strlcpy(proc_path + proc_path_len, tail,
- sizeof(proc_path) - proc_path_len);
- return proc_path;
-}
-
-/*
- * /proc/net/route parsing stuff.
- */
-#define ROUTE_MAX_COLS 12
-FILE *route_fd = (FILE *) 0;
-static char route_buffer[512];
-static int route_dev_col, route_dest_col, route_gw_col;
-static int route_flags_col, route_mask_col;
-static int route_num_cols;
-
-static int open_route_table (void);
-static void close_route_table (void);
-static int read_route_table (struct rtentry *rt);
-
-/********************************************************************
- *
- * close_route_table - close the interface to the route table
- */
-
-static void close_route_table (void)
-{
- if (route_fd != (FILE *) 0) {
- fclose (route_fd);
- route_fd = (FILE *) 0;
- }
-}
-
-/********************************************************************
- *
- * open_route_table - open the interface to the route table
- */
-static char route_delims[] = " \t\n";
-
-static int open_route_table (void)
-{
- char *path;
-
- close_route_table();
-
- path = path_to_procfs("/net/route");
- route_fd = fopen (path, "r");
- if (route_fd == NULL) {
- error("can't open routing table %s: %m", path);
- return 0;
- }
-
- route_dev_col = 0; /* default to usual columns */
- route_dest_col = 1;
- route_gw_col = 2;
- route_flags_col = 3;
- route_mask_col = 7;
- route_num_cols = 8;
-
- /* parse header line */
- if (fgets(route_buffer, sizeof(route_buffer), route_fd) != 0) {
- char *p = route_buffer, *q;
- int col;
- for (col = 0; col < ROUTE_MAX_COLS; ++col) {
- int used = 1;
- if ((q = strtok(p, route_delims)) == 0)
- break;
- if (strcasecmp(q, "iface") == 0)
- route_dev_col = col;
- else if (strcasecmp(q, "destination") == 0)
- route_dest_col = col;
- else if (strcasecmp(q, "gateway") == 0)
- route_gw_col = col;
- else if (strcasecmp(q, "flags") == 0)
- route_flags_col = col;
- else if (strcasecmp(q, "mask") == 0)
- route_mask_col = col;
- else
- used = 0;
- if (used && col >= route_num_cols)
- route_num_cols = col + 1;
- p = NULL;
- }
- }
-
- return 1;
-}
-
-/********************************************************************
- *
- * read_route_table - read the next entry from the route table
- */
-
-static int read_route_table(struct rtentry *rt)
-{
- char *cols[ROUTE_MAX_COLS], *p;
- int col;
-
- memset (rt, '\0', sizeof (struct rtentry));
-
- if (fgets (route_buffer, sizeof (route_buffer), route_fd) == (char *) 0)
- return 0;
-
- p = route_buffer;
- for (col = 0; col < route_num_cols; ++col) {
- cols[col] = strtok(p, route_delims);
- if (cols[col] == NULL)
- return 0; /* didn't get enough columns */
- p = NULL;
- }
-
- SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16);
- SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16);
- SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16);
-
- rt->rt_flags = (short) strtoul(cols[route_flags_col], NULL, 16);
- rt->rt_dev = cols[route_dev_col];
-
- return 1;
-}
-
-/********************************************************************
- *
- * defaultroute_exists - determine if there is a default route
- */
-
-static int defaultroute_exists (struct rtentry *rt)
-{
- int result = 0;
-
- if (!open_route_table())
- return 0;
-
- while (read_route_table(rt) != 0) {
- if ((rt->rt_flags & RTF_UP) == 0)
- continue;
-
- if (kernel_version > KVERSION(2,1,0) && SIN_ADDR(rt->rt_genmask) != 0)
- continue;
- if (SIN_ADDR(rt->rt_dst) == 0L) {
- result = 1;
- break;
- }
- }
-
- close_route_table();
- return result;
-}
-
-/*
- * have_route_to - determine if the system has any route to
- * a given IP address. `addr' is in network byte order.
- * Return value is 1 if yes, 0 if no, -1 if don't know.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-int have_route_to(u_int32_t addr)
-{
- struct rtentry rt;
- int result = 0;
-
- if (!open_route_table())
- return -1; /* don't know */
-
- while (read_route_table(&rt)) {
- if ((rt.rt_flags & RTF_UP) == 0 || strcmp(rt.rt_dev, ifname) == 0)
- continue;
- if ((addr & SIN_ADDR(rt.rt_genmask)) == SIN_ADDR(rt.rt_dst)) {
- result = 1;
- break;
- }
- }
-
- close_route_table();
- return result;
-}
-
-/********************************************************************
- *
- * sifdefaultroute - assign a default route through the address given.
- */
-
-int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
- struct rtentry rt;
-
- if (defaultroute_exists(&rt) && strcmp(rt.rt_dev, ifname) != 0) {
- u_int32_t old_gateway = SIN_ADDR(rt.rt_gateway);
-
- if (old_gateway != gateway)
- error("not replacing existing default route to %s [%I]",
- rt.rt_dev, old_gateway);
- return 0;
- }
-
- memset (&rt, '\0', sizeof (rt));
- SET_SA_FAMILY (rt.rt_dst, AF_INET);
- SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
- if (kernel_version > KVERSION(2,1,0)) {
- SET_SA_FAMILY (rt.rt_genmask, AF_INET);
- SIN_ADDR(rt.rt_genmask) = 0L;
- }
-
- SIN_ADDR(rt.rt_gateway) = gateway;
-
- rt.rt_flags = RTF_UP | RTF_GATEWAY;
- if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
- if ( ! ok_error ( errno ))
- error("default route ioctl(SIOCADDRT): %m(%d)", errno);
- return 0;
- }
-
- default_route_gateway = gateway;
- return 1;
-}
-
-/********************************************************************
- *
- * cifdefaultroute - delete a default route through the address given.
- */
-
-int cifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
- struct rtentry rt;
-
- default_route_gateway = 0;
-
- memset (&rt, '\0', sizeof (rt));
- SET_SA_FAMILY (rt.rt_dst, AF_INET);
- SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
- if (kernel_version > KVERSION(2,1,0)) {
- SET_SA_FAMILY (rt.rt_genmask, AF_INET);
- SIN_ADDR(rt.rt_genmask) = 0L;
- }
-
- SIN_ADDR(rt.rt_gateway) = gateway;
-
- rt.rt_flags = RTF_UP | RTF_GATEWAY;
- if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
- if (still_ppp()) {
- if ( ! ok_error ( errno ))
- error("default route ioctl(SIOCDELRT): %m (%d)", errno);
- return 0;
- }
- }
-
- return 1;
-}
-
-/********************************************************************
- *
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-
-int sifproxyarp (int unit, u_int32_t his_adr)
-{
- struct arpreq arpreq;
- char *forw_path;
-
- if (has_proxy_arp == 0) {
- memset (&arpreq, '\0', sizeof(arpreq));
-
- SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
- SIN_ADDR(arpreq.arp_pa) = his_adr;
- arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-/*
- * Get the hardware address of an interface on the same subnet
- * as our local address.
- */
- if (!get_ether_addr(his_adr, &arpreq.arp_ha, proxy_arp_dev,
- sizeof(proxy_arp_dev))) {
- error("Cannot determine ethernet address for proxy ARP");
- return 0;
- }
- strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
- if (ioctl(sock_fd, SIOCSARP, (caddr_t)&arpreq) < 0) {
- if ( ! ok_error ( errno ))
- error("ioctl(SIOCSARP): %m(%d)", errno);
- return 0;
- }
- proxy_arp_addr = his_adr;
- has_proxy_arp = 1;
-
- if (tune_kernel) {
- forw_path = path_to_procfs("/sys/net/ipv4/ip_forward");
- if (forw_path != 0) {
- int fd = open(forw_path, O_WRONLY);
- if (fd >= 0) {
- if (write(fd, "1", 1) != 1)
- error("Couldn't enable IP forwarding: %m");
- close(fd);
- }
- }
- }
- }
-
- return 1;
-}
-
-/********************************************************************
- *
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-
-int cifproxyarp (int unit, u_int32_t his_adr)
-{
- struct arpreq arpreq;
-
- if (has_proxy_arp) {
- has_proxy_arp = 0;
- memset (&arpreq, '\0', sizeof(arpreq));
- SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
- SIN_ADDR(arpreq.arp_pa) = his_adr;
- arpreq.arp_flags = ATF_PERM | ATF_PUBL;
- strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
- if (ioctl(sock_fd, SIOCDARP, (caddr_t)&arpreq) < 0) {
- if ( ! ok_error ( errno ))
- warn("ioctl(SIOCDARP): %m(%d)", errno);
- return 0;
- }
- }
- return 1;
-}
-
-/********************************************************************
- *
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-
-static int get_ether_addr (u_int32_t ipaddr,
- struct sockaddr *hwaddr,
- char *name, int namelen)
-{
- struct ifreq *ifr, *ifend;
- u_int32_t ina, mask;
- char *aliasp;
- struct ifreq ifreq;
- struct ifconf ifc;
- struct ifreq ifs[MAX_IFS];
-
- ifc.ifc_len = sizeof(ifs);
- ifc.ifc_req = ifs;
- if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
- if ( ! ok_error ( errno ))
- error("ioctl(SIOCGIFCONF): %m(%d)", errno);
- return 0;
- }
-
- SYSDEBUG ((LOG_DEBUG, "proxy arp: scanning %d interfaces for IP %s",
- ifc.ifc_len / sizeof(struct ifreq), ip_ntoa(ipaddr)));
-/*
- * Scan through looking for an interface with an Internet
- * address on the same subnet as `ipaddr'.
- */
- ifend = ifs + (ifc.ifc_len / sizeof(struct ifreq));
- for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
- if (ifr->ifr_addr.sa_family == AF_INET) {
- ina = SIN_ADDR(ifr->ifr_addr);
- strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
- SYSDEBUG ((LOG_DEBUG, "proxy arp: examining interface %s",
- ifreq.ifr_name));
-/*
- * Check that the interface is up, and not point-to-point
- * nor loopback.
- */
- if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
- continue;
-
- if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
- continue;
-/*
- * Get its netmask and check that it's on the right subnet.
- */
- if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
- continue;
-
- mask = SIN_ADDR(ifreq.ifr_addr);
- SYSDEBUG ((LOG_DEBUG, "proxy arp: interface addr %s mask %lx",
- ip_ntoa(ina), ntohl(mask)));
-
- if (((ipaddr ^ ina) & mask) != 0)
- continue;
- break;
- }
- }
-
- if (ifr >= ifend)
- return 0;
-
- strlcpy(name, ifreq.ifr_name, namelen);
-
- /* trim off the :1 in eth0:1 */
- aliasp = strchr(name, ':');
- if (aliasp != 0)
- *aliasp = 0;
-
- info("found interface %s for proxy arp", name);
-/*
- * Now get the hardware address.
- */
- memset (&ifreq.ifr_hwaddr, 0, sizeof (struct sockaddr));
- if (ioctl (sock_fd, SIOCGIFHWADDR, &ifreq) < 0) {
- error("SIOCGIFHWADDR(%s): %m(%d)", ifreq.ifr_name, errno);
- return 0;
- }
-
- memcpy (hwaddr,
- &ifreq.ifr_hwaddr,
- sizeof (struct sockaddr));
-
- SYSDEBUG ((LOG_DEBUG,
- "proxy arp: found hwaddr %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
- (int) ((unsigned char *) &hwaddr->sa_data)[0],
- (int) ((unsigned char *) &hwaddr->sa_data)[1],
- (int) ((unsigned char *) &hwaddr->sa_data)[2],
- (int) ((unsigned char *) &hwaddr->sa_data)[3],
- (int) ((unsigned char *) &hwaddr->sa_data)[4],
- (int) ((unsigned char *) &hwaddr->sa_data)[5],
- (int) ((unsigned char *) &hwaddr->sa_data)[6],
- (int) ((unsigned char *) &hwaddr->sa_data)[7]));
- return 1;
-}
-
-/*
- * get_if_hwaddr - get the hardware address for the specified
- * network interface device.
- */
-int
-get_if_hwaddr(u_char *addr, char *name)
-{
- struct ifreq ifreq;
- int ret, sock_fd;
-
- sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
- if (sock_fd < 0)
- return 0;
- memset(&ifreq.ifr_hwaddr, 0, sizeof(struct sockaddr));
- strlcpy(ifreq.ifr_name, name, sizeof(ifreq.ifr_name));
- ret = ioctl(sock_fd, SIOCGIFHWADDR, &ifreq);
- close(sock_fd);
- if (ret >= 0)
- memcpy(addr, ifreq.ifr_hwaddr.sa_data, 6);
- return ret;
-}
-
-/*
- * get_first_ethernet - return the name of the first ethernet-style
- * interface on this system.
- */
-char *
-get_first_ethernet()
-{
- return "eth0";
-}
-
-/********************************************************************
- *
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'. If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-
-u_int32_t GetMask (u_int32_t addr)
-{
- u_int32_t mask, nmask, ina;
- struct ifreq *ifr, *ifend, ifreq;
- struct ifconf ifc;
- struct ifreq ifs[MAX_IFS];
-
- addr = ntohl(addr);
-
- if (IN_CLASSA(addr)) /* determine network mask for address class */
- nmask = IN_CLASSA_NET;
- else if (IN_CLASSB(addr))
- nmask = IN_CLASSB_NET;
- else
- nmask = IN_CLASSC_NET;
-
- /* class D nets are disallowed by bad_ip_adrs */
- mask = netmask | htonl(nmask);
-/*
- * Scan through the system's network interfaces.
- */
- ifc.ifc_len = sizeof(ifs);
- ifc.ifc_req = ifs;
- if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
- if ( ! ok_error ( errno ))
- warn("ioctl(SIOCGIFCONF): %m(%d)", errno);
- return mask;
- }
-
- ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
- for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-/*
- * Check the interface's internet address.
- */
- if (ifr->ifr_addr.sa_family != AF_INET)
- continue;
- ina = SIN_ADDR(ifr->ifr_addr);
- if (((ntohl(ina) ^ addr) & nmask) != 0)
- continue;
-/*
- * Check that the interface is up, and not point-to-point nor loopback.
- */
- strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
- if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
- continue;
-
- if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
- continue;
-/*
- * Get its netmask and OR it into our mask.
- */
- if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
- continue;
- mask |= SIN_ADDR(ifreq.ifr_addr);
- break;
- }
- return mask;
-}
-
-/********************************************************************
- *
- * Internal routine to decode the version.modification.patch level
- */
-
-static void decode_version (char *buf, int *version,
- int *modification, int *patch)
-{
- char *endp;
-
- *version = (int) strtoul (buf, &endp, 10);
- *modification = 0;
- *patch = 0;
-
- if (endp != buf && *endp == '.') {
- buf = endp + 1;
- *modification = (int) strtoul (buf, &endp, 10);
- if (endp != buf && *endp == '.') {
- buf = endp + 1;
- *patch = (int) strtoul (buf, &buf, 10);
- }
- }
-}
-
-/********************************************************************
- *
- * Procedure to determine if the PPP line discipline is registered.
- */
-
-static int
-ppp_registered(void)
-{
- int local_fd;
- int mfd = -1;
- int ret = 0;
- char slave[16];
-
- /*
- * We used to open the serial device and set it to the ppp line
- * discipline here, in order to create a ppp unit. But that is
- * not a good idea - the user might have specified a device that
- * they can't open (permission, or maybe it doesn't really exist).
- * So we grab a pty master/slave pair and use that.
- */
- if (!get_pty(&mfd, &local_fd, slave, 0)) {
- no_ppp_msg = "Couldn't determine if PPP is supported (no free ptys)";
- return 0;
- }
-
- /*
- * Try to put the device into the PPP discipline.
- */
- if (ioctl(local_fd, TIOCSETD, &ppp_disc) < 0) {
- error("ioctl(TIOCSETD(PPP)): %m(%d)", errno);
- } else
- ret = 1;
-
- close(local_fd);
- close(mfd);
- return ret;
-}
-
-/********************************************************************
- *
- * ppp_available - check whether the system has any ppp interfaces
- * (in fact we check whether we can do an ioctl on ppp0).
- */
-
-int ppp_available(void)
-{
- int s, ok, fd;
- struct ifreq ifr;
- int size;
- int my_version, my_modification, my_patch;
- int osmaj, osmin, ospatch;
-
- no_ppp_msg =
- "This system lacks kernel support for PPP. This could be because\n"
- "the PPP kernel module could not be loaded, or because PPP was not\n"
- "included in the kernel configuration. If PPP was included as a\n"
- "module, try `/sbin/modprobe -v ppp'. If that fails, check that\n"
- "ppp.o exists in /lib/modules/`uname -r`/net.\n"
- "See README.linux file in the ppp distribution for more details.\n";
-
- /* get the kernel version now, since we are called before sys_init */
- uname(&utsname);
- osmaj = osmin = ospatch = 0;
- sscanf(utsname.release, "%d.%d.%d", &osmaj, &osmin, &ospatch);
- kernel_version = KVERSION(osmaj, osmin, ospatch);
-
- fd = open("/dev/ppp", O_RDWR);
-#if 0
- if (fd < 0 && errno == ENOENT) {
- /* try making it and see if that helps. */
- if (mknod("/dev/ppp", S_IFCHR | S_IRUSR | S_IWUSR,
- makedev(108, 0)) >= 0) {
- fd = open("/dev/ppp", O_RDWR);
- if (fd >= 0)
- info("Created /dev/ppp device node");
- else
- unlink("/dev/ppp"); /* didn't work, undo the mknod */
- } else if (errno == EEXIST) {
- fd = open("/dev/ppp", O_RDWR);
- }
- }
-#endif /* 0 */
- if (fd >= 0) {
- new_style_driver = 1;
-
- /* XXX should get from driver */
- driver_version = 2;
- driver_modification = 4;
- driver_patch = 0;
- close(fd);
- return 1;
- }
- if (kernel_version >= KVERSION(2,3,13)) {
- if (errno == ENOENT)
- no_ppp_msg =
- "pppd is unable to open the /dev/ppp device.\n"
- "You need to create the /dev/ppp device node by\n"
- "executing the following command as root:\n"
- " mknod /dev/ppp c 108 0\n";
- return 0;
- }
-
-/*
- * Open a socket for doing the ioctl operations.
- */
- s = socket(AF_INET, SOCK_DGRAM, 0);
- if (s < 0)
- return 0;
-
- strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
- ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-/*
- * If the device did not exist then attempt to create one by putting the
- * current tty into the PPP discipline. If this works then obtain the
- * flags for the device again.
- */
- if (!ok) {
- if (ppp_registered()) {
- strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
- ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
- }
- }
-/*
- * Ensure that the hardware address is for PPP and not something else
- */
- if (ok)
- ok = ioctl (s, SIOCGIFHWADDR, (caddr_t) &ifr) >= 0;
-
- if (ok && ((ifr.ifr_hwaddr.sa_family & ~0xFF) != ARPHRD_PPP))
- ok = 0;
-
-/*
- * This is the PPP device. Validate the version of the driver at this
- * point to ensure that this program will work with the driver.
- */
- if (ok) {
- char abBuffer [1024];
-
- ifr.ifr_data = abBuffer;
- size = ioctl (s, SIOCGPPPVER, (caddr_t) &ifr);
- if (size < 0) {
- error("Couldn't read driver version: %m");
- ok = 0;
- no_ppp_msg = "Sorry, couldn't verify kernel driver version\n";
-
- } else {
- decode_version(abBuffer,
- &driver_version,
- &driver_modification,
- &driver_patch);
-/*
- * Validate the version of the driver against the version that we used.
- */
- decode_version(VERSION,
- &my_version,
- &my_modification,
- &my_patch);
-
- /* The version numbers must match */
- if (driver_version != my_version)
- ok = 0;
-
- /* The modification levels must be legal */
- if (driver_modification < 3) {
- if (driver_modification >= 2) {
- /* we can cope with 2.2.0 and above */
- driver_is_old = 1;
- } else {
- ok = 0;
- }
- }
-
- close (s);
- if (!ok) {
- slprintf(route_buffer, sizeof(route_buffer),
- "Sorry - PPP driver version %d.%d.%d is out of date\n",
- driver_version, driver_modification, driver_patch);
-
- no_ppp_msg = route_buffer;
- }
- }
- }
- return ok;
-}
-
-/********************************************************************
- *
- * sifvjcomp - config tcp header compression
- */
-
-int sifvjcomp (int u, int vjcomp, int cidcomp, int maxcid)
-{
- u_int x = get_flags(ppp_dev_fd);
-
- if (vjcomp) {
- if (ioctl (ppp_dev_fd, PPPIOCSMAXCID, (caddr_t) &maxcid) < 0) {
- if (! ok_error (errno))
- error("ioctl(PPPIOCSMAXCID): %m(%d)", errno);
- vjcomp = 0;
- }
- }
-
- x = vjcomp ? x | SC_COMP_TCP : x &~ SC_COMP_TCP;
- x = cidcomp ? x & ~SC_NO_TCP_CCID : x | SC_NO_TCP_CCID;
- set_flags (ppp_dev_fd, x);
-
- return 1;
-}
-
-/********************************************************************
- *
- * sifup - Config the interface up and enable IP packets to pass.
- */
-
-int sifup(int u)
-{
- struct ifreq ifr;
-
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
- if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
- return 0;
- }
-
- ifr.ifr_flags |= (IFF_UP | IFF_POINTOPOINT);
- if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
- return 0;
- }
- if_is_up++;
-
- return 1;
-}
-
-/********************************************************************
- *
- * sifdown - Disable the indicated protocol and config the interface
- * down if there are no remaining protocols.
- */
-
-int sifdown (int u)
-{
- struct ifreq ifr;
-
- if (if_is_up && --if_is_up > 0)
- return 1;
-
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
- if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
- return 0;
- }
-
- ifr.ifr_flags &= ~IFF_UP;
- ifr.ifr_flags |= IFF_POINTOPOINT;
- if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
- return 0;
- }
- return 1;
-}
-
-/********************************************************************
- *
- * sifaddr - Config the interface IP addresses and netmask.
- */
-
-int sifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr,
- u_int32_t net_mask)
-{
- struct ifreq ifr;
- struct rtentry rt;
-
- memset (&ifr, '\0', sizeof (ifr));
- memset (&rt, '\0', sizeof (rt));
-
- SET_SA_FAMILY (ifr.ifr_addr, AF_INET);
- SET_SA_FAMILY (ifr.ifr_dstaddr, AF_INET);
- SET_SA_FAMILY (ifr.ifr_netmask, AF_INET);
-
- strlcpy (ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-/*
- * Set our IP address
- */
- SIN_ADDR(ifr.ifr_addr) = our_adr;
- if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
- if (errno != EEXIST) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFADDR): %m(%d)", errno);
- }
- else {
- warn("ioctl(SIOCSIFADDR): Address already exists");
- }
- return (0);
- }
-/*
- * Set the gateway address
- */
- SIN_ADDR(ifr.ifr_dstaddr) = his_adr;
- if (ioctl(sock_fd, SIOCSIFDSTADDR, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFDSTADDR): %m(%d)", errno);
- return (0);
- }
-/*
- * Set the netmask.
- * For recent kernels, force the netmask to 255.255.255.255.
- */
- if (kernel_version >= KVERSION(2,1,16))
- net_mask = ~0L;
- if (net_mask != 0) {
- SIN_ADDR(ifr.ifr_netmask) = net_mask;
- if (ioctl(sock_fd, SIOCSIFNETMASK, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFNETMASK): %m(%d)", errno);
- return (0);
- }
- }
-/*
- * Add the device route
- */
- if (kernel_version < KVERSION(2,1,16)) {
- SET_SA_FAMILY (rt.rt_dst, AF_INET);
- SET_SA_FAMILY (rt.rt_gateway, AF_INET);
- rt.rt_dev = ifname;
-
- SIN_ADDR(rt.rt_gateway) = 0L;
- SIN_ADDR(rt.rt_dst) = his_adr;
- rt.rt_flags = RTF_UP | RTF_HOST;
-
- if (kernel_version > KVERSION(2,1,0)) {
- SET_SA_FAMILY (rt.rt_genmask, AF_INET);
- SIN_ADDR(rt.rt_genmask) = -1L;
- }
-
- if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCADDRT) device route: %m(%d)", errno);
- return (0);
- }
- }
-
- /* set ip_dynaddr in demand mode if address changes */
- if (demand && tune_kernel && !dynaddr_set
- && our_old_addr && our_old_addr != our_adr) {
- /* set ip_dynaddr if possible */
- char *path;
- int fd;
-
- path = path_to_procfs("/sys/net/ipv4/ip_dynaddr");
- if (path != 0 && (fd = open(path, O_WRONLY)) >= 0) {
- if (write(fd, "1", 1) != 1)
- error("Couldn't enable dynamic IP addressing: %m");
- close(fd);
- }
- dynaddr_set = 1; /* only 1 attempt */
- }
- our_old_addr = 0;
-
- return 1;
-}
-
-/********************************************************************
- *
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-
-int cifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr)
-{
- struct ifreq ifr;
-
- if (kernel_version < KVERSION(2,1,16)) {
-/*
- * Delete the route through the device
- */
- struct rtentry rt;
- memset (&rt, '\0', sizeof (rt));
-
- SET_SA_FAMILY (rt.rt_dst, AF_INET);
- SET_SA_FAMILY (rt.rt_gateway, AF_INET);
- rt.rt_dev = ifname;
-
- SIN_ADDR(rt.rt_gateway) = 0;
- SIN_ADDR(rt.rt_dst) = his_adr;
- rt.rt_flags = RTF_UP | RTF_HOST;
-
- if (kernel_version > KVERSION(2,1,0)) {
- SET_SA_FAMILY (rt.rt_genmask, AF_INET);
- SIN_ADDR(rt.rt_genmask) = -1L;
- }
-
- if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
- if (still_ppp() && ! ok_error (errno))
- error("ioctl(SIOCDELRT) device route: %m(%d)", errno);
- return (0);
- }
- }
-
- /* This way it is possible to have an IPX-only or IPv6-only interface */
- memset(&ifr, 0, sizeof(ifr));
- SET_SA_FAMILY(ifr.ifr_addr, AF_INET);
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
- if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno)) {
- error("ioctl(SIOCSIFADDR): %m(%d)", errno);
- return 0;
- }
- }
-
- our_old_addr = our_adr;
-
- return 1;
-}
-
-#ifdef INET6
-/********************************************************************
- *
- * sif6addr - Config the interface with an IPv6 link-local address
- */
-int sif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
- struct in6_ifreq ifr6;
- struct ifreq ifr;
- struct in6_rtmsg rt6;
-
- if (sock6_fd < 0) {
- errno = -sock6_fd;
- error("IPv6 socket creation failed: %m");
- return 0;
- }
- memset(&ifr, 0, sizeof (ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
- error("sif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
- return 0;
- }
-
- /* Local interface */
- memset(&ifr6, 0, sizeof(ifr6));
- IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
- ifr6.ifr6_ifindex = ifr.ifr_ifindex;
- ifr6.ifr6_prefixlen = 10;
-
- if (ioctl(sock6_fd, SIOCSIFADDR, &ifr6) < 0) {
- error("sif6addr: ioctl(SIOCSIFADDR): %m (%d)", errno);
- return 0;
- }
-
- /* Route to remote host */
- memset(&rt6, 0, sizeof(rt6));
- IN6_LLADDR_FROM_EUI64(rt6.rtmsg_dst, his_eui64);
- rt6.rtmsg_flags = RTF_UP;
- rt6.rtmsg_dst_len = 10;
- rt6.rtmsg_ifindex = ifr.ifr_ifindex;
- rt6.rtmsg_metric = 1;
-
- if (ioctl(sock6_fd, SIOCADDRT, &rt6) < 0) {
- error("sif6addr: ioctl(SIOCADDRT): %m (%d)", errno);
- return 0;
- }
-
- return 1;
-}
-
-
-/********************************************************************
- *
- * cif6addr - Remove IPv6 address from interface
- */
-int cif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
- struct ifreq ifr;
- struct in6_ifreq ifr6;
-
- if (sock6_fd < 0) {
- errno = -sock6_fd;
- error("IPv6 socket creation failed: %m");
- return 0;
- }
- memset(&ifr, 0, sizeof(ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
- error("cif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
- return 0;
- }
-
- memset(&ifr6, 0, sizeof(ifr6));
- IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
- ifr6.ifr6_ifindex = ifr.ifr_ifindex;
- ifr6.ifr6_prefixlen = 10;
-
- if (ioctl(sock6_fd, SIOCDIFADDR, &ifr6) < 0) {
- if (errno != EADDRNOTAVAIL) {
- if (! ok_error (errno))
- error("cif6addr: ioctl(SIOCDIFADDR): %m (%d)", errno);
- }
- else {
- warn("cif6addr: ioctl(SIOCDIFADDR): No such address");
- }
- return (0);
- }
- return 1;
-}
-#endif /* INET6 */
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side
- * to the uid given. Assumes slave_name points to >= 16 bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
- int *master_fdp;
- int *slave_fdp;
- char *slave_name;
- int uid;
-{
- int i, mfd, sfd = -1;
- char pty_name[16];
- struct termios tios;
-
-#ifdef TIOCGPTN
- /*
- * Try the unix98 way first.
- */
- mfd = open("/dev/ptmx", O_RDWR);
- if (mfd >= 0) {
- int ptn;
- if (ioctl(mfd, TIOCGPTN, &ptn) >= 0) {
- slprintf(pty_name, sizeof(pty_name), "/dev/pts/%d", ptn);
- chmod(pty_name, S_IRUSR | S_IWUSR);
-#ifdef TIOCSPTLCK
- ptn = 0;
- if (ioctl(mfd, TIOCSPTLCK, &ptn) < 0)
- warn("Couldn't unlock pty slave %s: %m", pty_name);
-#endif
- if ((sfd = open(pty_name, O_RDWR | O_NOCTTY)) < 0)
- warn("Couldn't open pty slave %s: %m", pty_name);
- }
- }
-#endif /* TIOCGPTN */
-
- if (sfd < 0) {
- /* the old way - scan through the pty name space */
- for (i = 0; i < 64; ++i) {
- slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
- 'p' + i / 16, i % 16);
- mfd = open(pty_name, O_RDWR, 0);
- if (mfd >= 0) {
- pty_name[5] = 't';
- sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
- if (sfd >= 0) {
- fchown(sfd, uid, -1);
- fchmod(sfd, S_IRUSR | S_IWUSR);
- break;
- }
- close(mfd);
- }
- }
- }
-
- if (sfd < 0)
- return 0;
-
- strlcpy(slave_name, pty_name, 16);
- *master_fdp = mfd;
- *slave_fdp = sfd;
- if (tcgetattr(sfd, &tios) == 0) {
- tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
- tios.c_cflag |= CS8 | CREAD | CLOCAL;
- tios.c_iflag = IGNPAR;
- tios.c_oflag = 0;
- tios.c_lflag = 0;
- if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
- warn("couldn't set attributes on pty: %m");
- } else
- warn("couldn't get attributes on pty: %m");
-
- return 1;
-}
-
-/********************************************************************
- *
- * open_loopback - open the device we use for getting packets
- * in demand mode. Under Linux, we use a pty master/slave pair.
- */
-int
-open_ppp_loopback(void)
-{
- int flags;
-
- looped = 1;
- if (new_style_driver) {
- /* allocate ourselves a ppp unit */
- if (make_ppp_unit() < 0)
- die(1);
- set_flags(ppp_dev_fd, SC_LOOP_TRAFFIC);
- set_kdebugflag(kdebugflag);
- ppp_fd = -1;
- return ppp_dev_fd;
- }
-
- if (!get_pty(&master_fd, &slave_fd, loop_name, 0))
- fatal("No free pty for loopback");
- SYSDEBUG(("using %s for loopback", loop_name));
-
- set_ppp_fd(slave_fd);
-
- flags = fcntl(master_fd, F_GETFL);
- if (flags == -1 ||
- fcntl(master_fd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set master loopback to nonblock: %m(%d)", errno);
-
- flags = fcntl(ppp_fd, F_GETFL);
- if (flags == -1 ||
- fcntl(ppp_fd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set slave loopback to nonblock: %m(%d)", errno);
-
- if (ioctl(ppp_fd, TIOCSETD, &ppp_disc) < 0)
- fatal("ioctl(TIOCSETD): %m(%d)", errno);
-/*
- * Find out which interface we were given.
- */
- if (ioctl(ppp_fd, PPPIOCGUNIT, &ifunit) < 0)
- fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-/*
- * Enable debug in the driver if requested.
- */
- set_kdebugflag (kdebugflag);
-
- return master_fd;
-}
-
-/********************************************************************
- *
- * restore_loop - reattach the ppp unit to the loopback.
- *
- * The kernel ppp driver automatically reattaches the ppp unit to
- * the loopback if the serial port is set to a line discipline other
- * than ppp, or if it detects a modem hangup. The former will happen
- * in disestablish_ppp if the latter hasn't already happened, so we
- * shouldn't need to do anything.
- *
- * Just to be sure, set the real serial port to the normal discipline.
- */
-
-static void
-restore_loop(void)
-{
- looped = 1;
- if (new_style_driver) {
- set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_LOOP_TRAFFIC);
- return;
- }
- if (ppp_fd != slave_fd) {
- (void) ioctl(ppp_fd, TIOCSETD, &tty_disc);
- set_ppp_fd(slave_fd);
- }
-}
-
-/********************************************************************
- *
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-
-int
-sifnpmode(u, proto, mode)
- int u;
- int proto;
- enum NPmode mode;
-{
- struct npioctl npi;
-
- npi.protocol = proto;
- npi.mode = mode;
- if (ioctl(ppp_dev_fd, PPPIOCSNPMODE, (caddr_t) &npi) < 0) {
- if (! ok_error (errno))
- error("ioctl(PPPIOCSNPMODE, %d, %d): %m (%d)",
- proto, mode, errno);
- return 0;
- }
- return 1;
-}
-
-
-/********************************************************************
- *
- * sipxfaddr - Config the interface IPX networknumber
- */
-
-int sipxfaddr (int unit, unsigned long int network, unsigned char * node )
-{
- int result = 1;
-
-#ifdef IPX_CHANGE
- int skfd;
- struct ifreq ifr;
- struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
- skfd = socket (AF_IPX, SOCK_DGRAM, 0);
- if (skfd < 0) {
- if (! ok_error (errno))
- dbglog("socket(AF_IPX): %m (%d)", errno);
- result = 0;
- }
- else {
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
- memcpy (sipx->sipx_node, node, IPX_NODE_LEN);
- sipx->sipx_family = AF_IPX;
- sipx->sipx_port = 0;
- sipx->sipx_network = htonl (network);
- sipx->sipx_type = IPX_FRAME_ETHERII;
- sipx->sipx_action = IPX_CRTITF;
-/*
- * Set the IPX device
- */
- if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
- result = 0;
- if (errno != EEXIST) {
- if (! ok_error (errno))
- dbglog("ioctl(SIOCSIFADDR, CRTITF): %m (%d)", errno);
- }
- else {
- warn("ioctl(SIOCSIFADDR, CRTITF): Address already exists");
- }
- }
- close (skfd);
- }
-#endif
- return result;
-}
-
-/********************************************************************
- *
- * cipxfaddr - Clear the information for the IPX network. The IPX routes
- * are removed and the device is no longer able to pass IPX
- * frames.
- */
-
-int cipxfaddr (int unit)
-{
- int result = 1;
-
-#ifdef IPX_CHANGE
- int skfd;
- struct ifreq ifr;
- struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
- skfd = socket (AF_IPX, SOCK_DGRAM, 0);
- if (skfd < 0) {
- if (! ok_error (errno))
- dbglog("socket(AF_IPX): %m (%d)", errno);
- result = 0;
- }
- else {
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
- sipx->sipx_type = IPX_FRAME_ETHERII;
- sipx->sipx_action = IPX_DLTITF;
- sipx->sipx_family = AF_IPX;
-/*
- * Set the IPX device
- */
- if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- info("ioctl(SIOCSIFADDR, IPX_DLTITF): %m (%d)", errno);
- result = 0;
- }
- close (skfd);
- }
-#endif
- return result;
-}
-
-/*
- * Use the hostname as part of the random number seed.
- */
-int
-get_host_seed()
-{
- int h;
- char *p = hostname;
-
- h = 407;
- for (p = hostname; *p != 0; ++p)
- h = h * 37 + *p;
- return h;
-}
-
-/********************************************************************
- *
- * sys_check_options - check the options that the user specified
- */
-
-int
-sys_check_options(void)
-{
-#ifdef IPX_CHANGE
-/*
- * Disable the IPX protocol if the support is not present in the kernel.
- */
- char *path;
-
- if (ipxcp_protent.enabled_flag) {
- struct stat stat_buf;
- if ((path = path_to_procfs("/net/ipx_interface")) == 0
- || lstat(path, &stat_buf) < 0) {
- error("IPX support is not present in the kernel\n");
- ipxcp_protent.enabled_flag = 0;
- }
- }
-#endif
- if (demand && driver_is_old) {
- option_error("demand dialling is not supported by kernel driver "
- "version %d.%d.%d", driver_version, driver_modification,
- driver_patch);
- return 0;
- }
- if (multilink && !new_style_driver) {
- warn("Warning: multilink is not supported by the kernel driver");
- multilink = 0;
- }
- return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/sys-linux.c.wtmp b/mdk-stage1/ppp/pppd/sys-linux.c.wtmp
deleted file mode 100644
index f1b48423e..000000000
--- a/mdk-stage1/ppp/pppd/sys-linux.c.wtmp
+++ /dev/null
@@ -1,2750 +0,0 @@
-/*
- * sys-linux.c - System-dependent procedures for setting up
- * PPP interfaces on Linux systems
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/errno.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/sysmacros.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <string.h>
-#include <time.h>
-#include <memory.h>
-#include <utmp.h>
-#include <mntent.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <termios.h>
-#include <unistd.h>
-
-/* This is in netdevice.h. However, this compile will fail miserably if
- you attempt to include netdevice.h because it has so many references
- to __memcpy functions which it should not attempt to do. So, since I
- really don't use it, but it must be defined, define it now. */
-
-#ifndef MAX_ADDR_LEN
-#define MAX_ADDR_LEN 7
-#endif
-
-#if __GLIBC__ >= 2
-#include <asm/types.h> /* glibc 2 conflicts with linux/types.h */
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/route.h>
-#include <netinet/if_ether.h>
-#else
-#include <linux/types.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/route.h>
-#include <linux/if_ether.h>
-#endif
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-
-#ifdef IPX_CHANGE
-#include "ipxcp.h"
-#if __GLIBC__ >= 2 && \
- !(defined(__powerpc__) && __GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-#include <netipx/ipx.h>
-#else
-#include <linux/ipx.h>
-#endif
-#endif /* IPX_CHANGE */
-
-#ifdef PPP_FILTER
-#include <net/bpf.h>
-#include <linux/filter.h>
-#endif /* PPP_FILTER */
-
-#ifdef LOCKLIB
-#include <sys/locks.h>
-#endif
-
-#ifdef INET6
-#ifndef _LINUX_IN6_H
-/*
- * This is in linux/include/net/ipv6.h.
- */
-
-struct in6_ifreq {
- struct in6_addr ifr6_addr;
- __u32 ifr6_prefixlen;
- unsigned int ifr6_ifindex;
-};
-#endif
-
-#define IN6_LLADDR_FROM_EUI64(sin6, eui64) do { \
- memset(&sin6.s6_addr, 0, sizeof(struct in6_addr)); \
- sin6.s6_addr16[0] = htons(0xfe80); \
- eui64_copy(eui64, sin6.s6_addr32[2]); \
- } while (0)
-
-#endif /* INET6 */
-
-/* We can get an EIO error on an ioctl if the modem has hung up */
-#define ok_error(num) ((num)==EIO)
-
-static int tty_disc = N_TTY; /* The TTY discipline */
-static int ppp_disc = N_PPP; /* The PPP discpline */
-static int initfdflags = -1; /* Initial file descriptor flags for fd */
-static int ppp_fd = -1; /* fd which is set to PPP discipline */
-static int sock_fd = -1; /* socket for doing interface ioctls */
-static int slave_fd = -1;
-static int master_fd = -1;
-#ifdef INET6
-static int sock6_fd = -1;
-#endif /* INET6 */
-static int ppp_dev_fd = -1; /* fd for /dev/ppp (new style driver) */
-static int chindex; /* channel index (new style driver) */
-
-static fd_set in_fds; /* set of fds that wait_input waits for */
-static int max_in_fd; /* highest fd set in in_fds */
-
-static int has_proxy_arp = 0;
-static int driver_version = 0;
-static int driver_modification = 0;
-static int driver_patch = 0;
-static int driver_is_old = 0;
-static int restore_term = 0; /* 1 => we've munged the terminal */
-static struct termios inittermios; /* Initial TTY termios */
-
-static int new_style_driver = 0;
-
-static char loop_name[20];
-static unsigned char inbuf[512]; /* buffer for chars read from loopback */
-
-static int if_is_up; /* Interface has been marked up */
-static u_int32_t default_route_gateway; /* Gateway for default route added */
-static u_int32_t proxy_arp_addr; /* Addr for proxy arp entry added */
-static char proxy_arp_dev[16]; /* Device for proxy arp entry */
-static u_int32_t our_old_addr; /* for detecting address changes */
-static int dynaddr_set; /* 1 if ip_dynaddr set */
-static int looped; /* 1 if using loop */
-static int link_mtu; /* mtu for the link (not bundle) */
-
-static struct utsname utsname; /* for the kernel version */
-static int kernel_version;
-#define KVERSION(j,n,p) ((j)*1000000 + (n)*1000 + (p))
-
-#define MAX_IFS 100
-
-#define FLAGS_GOOD (IFF_UP | IFF_BROADCAST)
-#define FLAGS_MASK (IFF_UP | IFF_BROADCAST | \
- IFF_POINTOPOINT | IFF_LOOPBACK | IFF_NOARP)
-
-#define SIN_ADDR(x) (((struct sockaddr_in *) (&(x)))->sin_addr.s_addr)
-
-/* Prototypes for procedures local to this file. */
-static int get_flags (int fd);
-static void set_flags (int fd, int flags);
-static int translate_speed (int bps);
-static int baud_rate_of (int speed);
-static void close_route_table (void);
-static int open_route_table (void);
-static int read_route_table (struct rtentry *rt);
-static int defaultroute_exists (struct rtentry *rt);
-static int get_ether_addr (u_int32_t ipaddr, struct sockaddr *hwaddr,
- char *name, int namelen);
-static void decode_version (char *buf, int *version, int *mod, int *patch);
-static int set_kdebugflag(int level);
-static int ppp_registered(void);
-static int make_ppp_unit(void);
-static void restore_loop(void); /* Transfer ppp unit back to loopback */
-
-extern u_char inpacket_buf[]; /* borrowed from main.c */
-
-/*
- * SET_SA_FAMILY - set the sa_family field of a struct sockaddr,
- * if it exists.
- */
-
-#define SET_SA_FAMILY(addr, family) \
- memset ((char *) &(addr), '\0', sizeof(addr)); \
- addr.sa_family = (family);
-
-/*
- * Determine if the PPP connection should still be present.
- */
-
-extern int hungup;
-
-/* new_fd is the fd of a tty */
-static void set_ppp_fd (int new_fd)
-{
- SYSDEBUG ((LOG_DEBUG, "setting ppp_fd to %d\n", new_fd));
- ppp_fd = new_fd;
- if (!new_style_driver)
- ppp_dev_fd = new_fd;
-}
-
-static int still_ppp(void)
-{
- if (new_style_driver)
- return !hungup && ppp_fd >= 0;
- if (!hungup || ppp_fd == slave_fd)
- return 1;
- if (slave_fd >= 0) {
- set_ppp_fd(slave_fd);
- return 1;
- }
- return 0;
-}
-
-/********************************************************************
- *
- * Functions to read and set the flags value in the device driver
- */
-
-static int get_flags (int fd)
-{
- int flags;
-
- if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &flags) < 0) {
- if ( ok_error (errno) )
- flags = 0;
- else
- fatal("ioctl(PPPIOCGFLAGS): %m");
- }
-
- SYSDEBUG ((LOG_DEBUG, "get flags = %x\n", flags));
- return flags;
-}
-
-/********************************************************************/
-
-static void set_flags (int fd, int flags)
-{
- SYSDEBUG ((LOG_DEBUG, "set flags = %x\n", flags));
-
- if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &flags) < 0) {
- if (! ok_error (errno) )
- fatal("ioctl(PPPIOCSFLAGS, %x): %m", flags, errno);
- }
-}
-
-/********************************************************************
- *
- * sys_init - System-dependent initialization.
- */
-
-void sys_init(void)
-{
- int flags;
-
- if (new_style_driver) {
- ppp_dev_fd = open("/dev/ppp", O_RDWR);
- if (ppp_dev_fd < 0)
- fatal("Couldn't open /dev/ppp: %m");
- flags = fcntl(ppp_dev_fd, F_GETFL);
- if (flags == -1
- || fcntl(ppp_dev_fd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("Couldn't set /dev/ppp to nonblock: %m");
- }
-
- /* Get an internet socket for doing socket ioctls. */
- sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
- if (sock_fd < 0)
- fatal("Couldn't create IP socket: %m(%d)", errno);
-
-#ifdef INET6
- sock6_fd = socket(AF_INET6, SOCK_DGRAM, 0);
- if (sock6_fd < 0)
- sock6_fd = -errno; /* save errno for later */
-#endif
-
- FD_ZERO(&in_fds);
- max_in_fd = 0;
-}
-
-/********************************************************************
- *
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This shouldn't call die() because it's called from die().
- */
-
-void sys_cleanup(void)
-{
-/*
- * Take down the device
- */
- if (if_is_up) {
- if_is_up = 0;
- sifdown(0);
- }
-/*
- * Delete any routes through the device.
- */
- if (default_route_gateway != 0)
- cifdefaultroute(0, 0, default_route_gateway);
-
- if (has_proxy_arp)
- cifproxyarp(0, proxy_arp_addr);
-}
-
-/********************************************************************
- *
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close(void)
-{
- if (new_style_driver)
- close(ppp_dev_fd);
- if (sock_fd >= 0)
- close(sock_fd);
- if (slave_fd >= 0)
- close(slave_fd);
- if (master_fd >= 0)
- close(master_fd);
- closelog();
-}
-
-/********************************************************************
- *
- * set_kdebugflag - Define the debugging level for the kernel
- */
-
-static int set_kdebugflag (int requested_level)
-{
- if (new_style_driver && ifunit < 0)
- return 1;
- if (ioctl(ppp_dev_fd, PPPIOCSDEBUG, &requested_level) < 0) {
- if ( ! ok_error (errno) )
- error("ioctl(PPPIOCSDEBUG): %m");
- return (0);
- }
- SYSDEBUG ((LOG_INFO, "set kernel debugging level to %d",
- requested_level));
- return (1);
-}
-
-/********************************************************************
- *
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-
-int tty_establish_ppp (int tty_fd)
-{
- int x;
- int fd = -1;
-
-/*
- * Ensure that the tty device is in exclusive mode.
- */
- if (ioctl(tty_fd, TIOCEXCL, 0) < 0) {
- if ( ! ok_error ( errno ))
- warn("Couldn't make tty exclusive: %m");
- }
-/*
- * Demand mode - prime the old ppp device to relinquish the unit.
- */
- if (!new_style_driver && looped
- && ioctl(slave_fd, PPPIOCXFERUNIT, 0) < 0) {
- error("ioctl(transfer ppp unit): %m");
- return -1;
- }
-/*
- * Set the current tty to the PPP discpline
- */
-
-#ifndef N_SYNC_PPP
-#define N_SYNC_PPP 14
-#endif
- ppp_disc = (new_style_driver && sync_serial)? N_SYNC_PPP: N_PPP;
- if (ioctl(tty_fd, TIOCSETD, &ppp_disc) < 0) {
- if ( ! ok_error (errno) ) {
- error("Couldn't set tty to PPP discipline: %m");
- return -1;
- }
- }
-
- if (new_style_driver) {
- /* Open another instance of /dev/ppp and connect the channel to it */
- int flags;
-
- if (ioctl(tty_fd, PPPIOCGCHAN, &chindex) == -1) {
- error("Couldn't get channel number: %m");
- goto err;
- }
- dbglog("using channel %d", chindex);
- fd = open("/dev/ppp", O_RDWR);
- if (fd < 0) {
- error("Couldn't reopen /dev/ppp: %m");
- goto err;
- }
- if (ioctl(fd, PPPIOCATTCHAN, &chindex) < 0) {
- error("Couldn't attach to channel %d: %m", chindex);
- goto err_close;
- }
- flags = fcntl(fd, F_GETFL);
- if (flags == -1 || fcntl(fd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("Couldn't set /dev/ppp (channel) to nonblock: %m");
- set_ppp_fd(fd);
-
- if (!looped)
- ifunit = -1;
- if (!looped && !multilink) {
- /*
- * Create a new PPP unit.
- */
- if (make_ppp_unit() < 0)
- goto err_close;
- }
-
- if (looped)
- set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) & ~SC_LOOP_TRAFFIC);
-
- if (!multilink) {
- add_fd(ppp_dev_fd);
- if (ioctl(fd, PPPIOCCONNECT, &ifunit) < 0) {
- error("Couldn't attach to PPP unit %d: %m", ifunit);
- goto err_close;
- }
- }
-
- } else {
- /*
- * Old-style driver: find out which interface we were given.
- */
- set_ppp_fd (tty_fd);
- if (ioctl(tty_fd, PPPIOCGUNIT, &x) < 0) {
- if (ok_error (errno))
- goto err;
- fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
- }
- /* Check that we got the same unit again. */
- if (looped && x != ifunit)
- fatal("transfer_ppp failed: wanted unit %d, got %d", ifunit, x);
- ifunit = x;
-
- /*
- * Fetch the initial file flags and reset blocking mode on the file.
- */
- initfdflags = fcntl(tty_fd, F_GETFL);
- if (initfdflags == -1 ||
- fcntl(tty_fd, F_SETFL, initfdflags | O_NONBLOCK) == -1) {
- if ( ! ok_error (errno))
- warn("Couldn't set device to non-blocking mode: %m");
- }
- }
-
- looped = 0;
-
- /*
- * Enable debug in the driver if requested.
- */
- if (!looped)
- set_kdebugflag (kdebugflag);
-
-#define SC_RCVB (SC_RCV_B7_0 | SC_RCV_B7_1 | SC_RCV_EVNP | SC_RCV_ODDP)
-#define SC_LOGB (SC_DEBUG | SC_LOG_INPKT | SC_LOG_OUTPKT | SC_LOG_RAWIN \
- | SC_LOG_FLUSH)
-
- set_flags(ppp_fd, ((get_flags(ppp_fd) & ~(SC_RCVB | SC_LOGB))
- | ((kdebugflag * SC_DEBUG) & SC_LOGB)));
-
- SYSDEBUG ((LOG_NOTICE, "Using version %d.%d.%d of PPP driver",
- driver_version, driver_modification, driver_patch));
-
- return ppp_fd;
-
- err_close:
- close(fd);
- err:
- if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0 && !ok_error(errno))
- warn("Couldn't reset tty to normal line discipline: %m");
- return -1;
-}
-
-/********************************************************************
- *
- * tty_disestablish_ppp - Restore the serial port to normal operation,
- * and reconnect the ppp unit to the loopback if in demand mode.
- * This shouldn't call die() because it's called from die().
- */
-
-void tty_disestablish_ppp(int tty_fd)
-{
- if (demand)
- restore_loop();
- if (!hungup) {
-/*
- * Flush the tty output buffer so that the TIOCSETD doesn't hang.
- */
- if (tcflush(tty_fd, TCIOFLUSH) < 0)
- warn("tcflush failed: %m");
-/*
- * Restore the previous line discipline
- */
- if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0) {
- if ( ! ok_error (errno))
- error("ioctl(TIOCSETD, N_TTY): %m");
- }
-
- if (ioctl(tty_fd, TIOCNXCL, 0) < 0) {
- if ( ! ok_error (errno))
- warn("ioctl(TIOCNXCL): %m(%d)", errno);
- }
-
- /* Reset non-blocking mode on fd. */
- if (initfdflags != -1 && fcntl(tty_fd, F_SETFL, initfdflags) < 0) {
- if ( ! ok_error (errno))
- warn("Couldn't restore device fd flags: %m");
- }
- }
- initfdflags = -1;
-
- if (new_style_driver) {
- close(ppp_fd);
- ppp_fd = -1;
- if (!looped && ifunit >= 0 && ioctl(ppp_dev_fd, PPPIOCDETACH) < 0)
- error("Couldn't release PPP unit: %m");
- if (!multilink)
- remove_fd(ppp_dev_fd);
- }
-}
-
-/*
- * make_ppp_unit - make a new ppp unit for ppp_dev_fd.
- * Assumes new_style_driver.
- */
-static int make_ppp_unit()
-{
- int x;
-
- ifunit = req_unit;
- x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
- if (x < 0 && req_unit >= 0 && errno == EEXIST) {
- warn("Couldn't allocate PPP unit %d as it is already in use");
- ifunit = -1;
- x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
- }
- if (x < 0)
- error("Couldn't create new ppp unit: %m");
- return x;
-}
-
-/*
- * cfg_bundle - configure the existing bundle.
- * Used in demand mode.
- */
-void cfg_bundle(int mrru, int mtru, int rssn, int tssn)
-{
- int flags;
-
- if (!new_style_driver)
- return;
-
- /* set the mrru, mtu and flags */
- if (ioctl(ppp_dev_fd, PPPIOCSMRRU, &mrru) < 0)
- error("Couldn't set MRRU: %m");
- flags = get_flags(ppp_dev_fd);
- flags &= ~(SC_MP_SHORTSEQ | SC_MP_XSHORTSEQ);
- flags |= (rssn? SC_MP_SHORTSEQ: 0) | (tssn? SC_MP_XSHORTSEQ: 0)
- | (mrru? SC_MULTILINK: 0);
-
- set_flags(ppp_dev_fd, flags);
-
- /* connect up the channel */
- if (ioctl(ppp_fd, PPPIOCCONNECT, &ifunit) < 0)
- fatal("Couldn't attach to PPP unit %d: %m", ifunit);
- add_fd(ppp_dev_fd);
-}
-
-/*
- * make_new_bundle - create a new PPP unit (i.e. a bundle)
- * and connect our channel to it. This should only get called
- * if `multilink' was set at the time establish_ppp was called.
- * In demand mode this uses our existing bundle instead of making
- * a new one.
- */
-void make_new_bundle(int mrru, int mtru, int rssn, int tssn)
-{
- if (!new_style_driver)
- return;
-
- /* make us a ppp unit */
- if (make_ppp_unit() < 0)
- die(1);
-
- /* set the mrru and flags */
- cfg_bundle(mrru, mtru, rssn, tssn);
-}
-
-/*
- * bundle_attach - attach our link to a given PPP unit.
- * We assume the unit is controlled by another pppd.
- */
-int bundle_attach(int ifnum)
-{
- if (!new_style_driver)
- return -1;
-
- if (ioctl(ppp_dev_fd, PPPIOCATTACH, &ifnum) < 0) {
- if (errno == ENXIO)
- return 0; /* doesn't still exist */
- fatal("Couldn't attach to interface unit %d: %m\n", ifnum);
- }
- if (ioctl(ppp_fd, PPPIOCCONNECT, &ifnum) < 0)
- fatal("Couldn't connect to interface unit %d: %m", ifnum);
- set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_MULTILINK);
-
- ifunit = ifnum;
- return 1;
-}
-
-/********************************************************************
- *
- * clean_check - Fetch the flags for the device and generate
- * appropriate error messages.
- */
-void clean_check(void)
-{
- int x;
- char *s;
-
- if (still_ppp()) {
- if (ioctl(ppp_fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
- s = NULL;
- switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
- case SC_RCV_B7_0:
- s = "all had bit 7 set to 1";
- break;
-
- case SC_RCV_B7_1:
- s = "all had bit 7 set to 0";
- break;
-
- case SC_RCV_EVNP:
- s = "all had odd parity";
- break;
-
- case SC_RCV_ODDP:
- s = "all had even parity";
- break;
- }
-
- if (s != NULL) {
- warn("Receive serial link is not 8-bit clean:");
- warn("Problem: %s", s);
- }
- }
- }
-}
-
-
-/*
- * List of valid speeds.
- */
-
-struct speed {
- int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
- { 50, B50 },
-#endif
-#ifdef B75
- { 75, B75 },
-#endif
-#ifdef B110
- { 110, B110 },
-#endif
-#ifdef B134
- { 134, B134 },
-#endif
-#ifdef B150
- { 150, B150 },
-#endif
-#ifdef B200
- { 200, B200 },
-#endif
-#ifdef B300
- { 300, B300 },
-#endif
-#ifdef B600
- { 600, B600 },
-#endif
-#ifdef B1200
- { 1200, B1200 },
-#endif
-#ifdef B1800
- { 1800, B1800 },
-#endif
-#ifdef B2000
- { 2000, B2000 },
-#endif
-#ifdef B2400
- { 2400, B2400 },
-#endif
-#ifdef B3600
- { 3600, B3600 },
-#endif
-#ifdef B4800
- { 4800, B4800 },
-#endif
-#ifdef B7200
- { 7200, B7200 },
-#endif
-#ifdef B9600
- { 9600, B9600 },
-#endif
-#ifdef B19200
- { 19200, B19200 },
-#endif
-#ifdef B38400
- { 38400, B38400 },
-#endif
-#ifdef B57600
- { 57600, B57600 },
-#endif
-#ifdef B76800
- { 76800, B76800 },
-#endif
-#ifdef B115200
- { 115200, B115200 },
-#endif
-#ifdef EXTA
- { 19200, EXTA },
-#endif
-#ifdef EXTB
- { 38400, EXTB },
-#endif
-#ifdef B230400
- { 230400, B230400 },
-#endif
-#ifdef B460800
- { 460800, B460800 },
-#endif
-#ifdef B921600
- { 921600, B921600 },
-#endif
- { 0, 0 }
-};
-
-/********************************************************************
- *
- * Translate from bits/second to a speed_t.
- */
-
-static int translate_speed (int bps)
-{
- struct speed *speedp;
-
- if (bps != 0) {
- for (speedp = speeds; speedp->speed_int; speedp++) {
- if (bps == speedp->speed_int)
- return speedp->speed_val;
- }
- warn("speed %d not supported", bps);
- }
- return 0;
-}
-
-/********************************************************************
- *
- * Translate from a speed_t to bits/second.
- */
-
-static int baud_rate_of (int speed)
-{
- struct speed *speedp;
-
- if (speed != 0) {
- for (speedp = speeds; speedp->speed_int; speedp++) {
- if (speed == speedp->speed_val)
- return speedp->speed_int;
- }
- }
- return 0;
-}
-
-/********************************************************************
- *
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc. If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-
-void set_up_tty(int tty_fd, int local)
-{
- int speed;
- struct termios tios;
-
- setdtr(tty_fd, 1);
- if (tcgetattr(tty_fd, &tios) < 0) {
- if (!ok_error(errno))
- fatal("tcgetattr: %m(%d)", errno);
- return;
- }
-
- if (!restore_term)
- inittermios = tios;
-
- tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
- tios.c_cflag |= CS8 | CREAD | HUPCL;
-
- tios.c_iflag = IGNBRK | IGNPAR;
- tios.c_oflag = 0;
- tios.c_lflag = 0;
- tios.c_cc[VMIN] = 1;
- tios.c_cc[VTIME] = 0;
-
- if (local || !modem)
- tios.c_cflag ^= (CLOCAL | HUPCL);
-
- switch (crtscts) {
- case 1:
- tios.c_cflag |= CRTSCTS;
- break;
-
- case -2:
- tios.c_iflag |= IXON | IXOFF;
- tios.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */
- tios.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */
- break;
-
- case -1:
- tios.c_cflag &= ~CRTSCTS;
- break;
-
- default:
- break;
- }
-
- speed = translate_speed(inspeed);
- if (speed) {
- cfsetospeed (&tios, speed);
- cfsetispeed (&tios, speed);
- }
-/*
- * We can't proceed if the serial port speed is B0,
- * since that implies that the serial port is disabled.
- */
- else {
- speed = cfgetospeed(&tios);
- if (speed == B0)
- fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
- }
-
- if (tcsetattr(tty_fd, TCSAFLUSH, &tios) < 0)
- if (!ok_error(errno))
- fatal("tcsetattr: %m");
-
- baud_rate = baud_rate_of(speed);
- restore_term = 1;
-}
-
-/********************************************************************
- *
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-
-void setdtr (int tty_fd, int on)
-{
- int modembits = TIOCM_DTR;
-
- ioctl(tty_fd, (on ? TIOCMBIS : TIOCMBIC), &modembits);
-}
-
-/********************************************************************
- *
- * restore_tty - restore the terminal to the saved settings.
- */
-
-void restore_tty (int tty_fd)
-{
- if (restore_term) {
- restore_term = 0;
-/*
- * Turn off echoing, because otherwise we can get into
- * a loop with the tty and the modem echoing to each other.
- * We presume we are the sole user of this tty device, so
- * when we close it, it will revert to its defaults anyway.
- */
- if (!default_device)
- inittermios.c_lflag &= ~(ECHO | ECHONL);
-
- if (tcsetattr(tty_fd, TCSAFLUSH, &inittermios) < 0) {
- if (! ok_error (errno))
- warn("tcsetattr: %m");
- }
- }
-}
-
-/********************************************************************
- *
- * output - Output PPP packet.
- */
-
-void output (int unit, unsigned char *p, int len)
-{
- int fd = ppp_fd;
- int proto;
-
- if (debug)
- dbglog("sent %P", p, len);
-
- if (len < PPP_HDRLEN)
- return;
- if (new_style_driver) {
- p += 2;
- len -= 2;
- proto = (p[0] << 8) + p[1];
- if (ifunit >= 0 && !(proto >= 0xc000 || proto == PPP_CCPFRAG))
- fd = ppp_dev_fd;
- }
- if (write(fd, p, len) < 0) {
- if (errno == EWOULDBLOCK || errno == ENOBUFS
- || errno == ENXIO || errno == EIO || errno == EINTR)
- warn("write: warning: %m (%d)", errno);
- else
- error("write: %m (%d)", errno);
- }
-}
-
-/********************************************************************
- *
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-
-void wait_input(struct timeval *timo)
-{
- fd_set ready, exc;
- int n;
-
- ready = in_fds;
- exc = in_fds;
- n = select(max_in_fd + 1, &ready, NULL, &exc, timo);
- if (n < 0 && errno != EINTR)
- fatal("select: %m(%d)", errno);
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(int fd)
-{
- FD_SET(fd, &in_fds);
- if (fd > max_in_fd)
- max_in_fd = fd;
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(int fd)
-{
- FD_CLR(fd, &in_fds);
-}
-
-
-/********************************************************************
- *
- * read_packet - get a PPP packet from the serial device.
- */
-
-int read_packet (unsigned char *buf)
-{
- int len, nr;
-
- len = PPP_MRU + PPP_HDRLEN;
- if (new_style_driver) {
- *buf++ = PPP_ALLSTATIONS;
- *buf++ = PPP_UI;
- len -= 2;
- }
- nr = -1;
- if (ppp_fd >= 0) {
- nr = read(ppp_fd, buf, len);
- if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
- error("read: %m");
- if (nr < 0 && errno == ENXIO)
- return 0;
- }
- if (nr < 0 && new_style_driver && ifunit >= 0) {
- /* N.B. we read ppp_fd first since LCP packets come in there. */
- nr = read(ppp_dev_fd, buf, len);
- if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
- error("read /dev/ppp: %m");
- if (nr < 0 && errno == ENXIO)
- return 0;
- }
- return (new_style_driver && nr > 0)? nr+2: nr;
-}
-
-/********************************************************************
- *
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output(void)
-{
- int rv = 0;
- int n;
-
- if (new_style_driver) {
- while ((n = read_packet(inpacket_buf)) > 0)
- if (loop_frame(inpacket_buf, n))
- rv = 1;
- return rv;
- }
-
- while ((n = read(master_fd, inbuf, sizeof(inbuf))) > 0)
- if (loop_chars(inbuf, n))
- rv = 1;
-
- if (n == 0)
- fatal("eof on loopback");
-
- if (errno != EWOULDBLOCK)
- fatal("read from loopback: %m(%d)", errno);
-
- return rv;
-}
-
-/*
- * netif_set_mtu - set the MTU on the PPP network interface.
- */
-void
-netif_set_mtu(int unit, int mtu)
-{
- struct ifreq ifr;
-
- SYSDEBUG ((LOG_DEBUG, "netif_set_mtu: mtu = %d\n", mtu));
-
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
- ifr.ifr_mtu = mtu;
-
- if (ifunit >= 0 && ioctl(sock_fd, SIOCSIFMTU, (caddr_t) &ifr) < 0)
- fatal("ioctl(SIOCSIFMTU): %m");
-}
-
-/********************************************************************
- *
- * tty_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-
-void tty_send_config (int mtu,u_int32_t asyncmap,int pcomp,int accomp)
-{
- u_int x;
-
-/*
- * Set the asyncmap and other parameters for the ppp device
- */
- if (!still_ppp())
- return;
- link_mtu = mtu;
- SYSDEBUG ((LOG_DEBUG, "send_config: asyncmap = %lx\n", asyncmap));
- if (ioctl(ppp_fd, PPPIOCSASYNCMAP, (caddr_t) &asyncmap) < 0) {
- if (!ok_error(errno))
- fatal("ioctl(PPPIOCSASYNCMAP): %m(%d)", errno);
- return;
- }
-
- x = get_flags(ppp_fd);
- x = pcomp ? x | SC_COMP_PROT : x & ~SC_COMP_PROT;
- x = accomp ? x | SC_COMP_AC : x & ~SC_COMP_AC;
- x = sync_serial ? x | SC_SYNC : x & ~SC_SYNC;
- set_flags(ppp_fd, x);
-}
-
-/********************************************************************
- *
- * tty_set_xaccm - set the extended transmit ACCM for the interface.
- */
-
-void tty_set_xaccm (ext_accm accm)
-{
- SYSDEBUG ((LOG_DEBUG, "set_xaccm: %08lx %08lx %08lx %08lx\n",
- accm[0], accm[1], accm[2], accm[3]));
-
- if (!still_ppp())
- return;
- if (ioctl(ppp_fd, PPPIOCSXASYNCMAP, accm) < 0 && errno != ENOTTY) {
- if ( ! ok_error (errno))
- warn("ioctl(set extended ACCM): %m(%d)", errno);
- }
-}
-
-/********************************************************************
- *
- * tty_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-
-void tty_recv_config (int mru,u_int32_t asyncmap,int pcomp,int accomp)
-{
- SYSDEBUG ((LOG_DEBUG, "recv_config: mru = %d\n", mru));
-/*
- * If we were called because the link has gone down then there is nothing
- * which may be done. Just return without incident.
- */
- if (!still_ppp())
- return;
-/*
- * Set the receiver parameters
- */
- if (ioctl(ppp_fd, PPPIOCSMRU, (caddr_t) &mru) < 0) {
- if ( ! ok_error (errno))
- error("ioctl(PPPIOCSMRU): %m(%d)", errno);
- }
- if (new_style_driver && ifunit >= 0
- && ioctl(ppp_dev_fd, PPPIOCSMRU, (caddr_t) &mru) < 0)
- error("Couldn't set MRU in generic PPP layer: %m");
-
- SYSDEBUG ((LOG_DEBUG, "recv_config: asyncmap = %lx\n", asyncmap));
- if (ioctl(ppp_fd, PPPIOCSRASYNCMAP, (caddr_t) &asyncmap) < 0) {
- if (!ok_error(errno))
- error("ioctl(PPPIOCSRASYNCMAP): %m(%d)", errno);
- }
-}
-
-/********************************************************************
- *
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-
-int ccp_test (int unit, u_char *opt_ptr, int opt_len, int for_transmit)
-{
- struct ppp_option_data data;
-
- memset (&data, '\0', sizeof (data));
- data.ptr = opt_ptr;
- data.length = opt_len;
- data.transmit = for_transmit;
-
- if (ioctl(ppp_dev_fd, PPPIOCSCOMPRESS, (caddr_t) &data) >= 0)
- return 1;
-
- return (errno == ENOBUFS)? 0: -1;
-}
-
-/********************************************************************
- *
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-
-void ccp_flags_set (int unit, int isopen, int isup)
-{
- if (still_ppp()) {
- int x = get_flags(ppp_dev_fd);
- x = isopen? x | SC_CCP_OPEN : x &~ SC_CCP_OPEN;
- x = isup? x | SC_CCP_UP : x &~ SC_CCP_UP;
- set_flags (ppp_dev_fd, x);
- }
-}
-
-#ifdef PPP_FILTER
-/*
- * set_filters - set the active and pass filters in the kernel driver.
- */
-int set_filters(struct bpf_program *pass, struct bpf_program *active)
-{
- struct sock_fprog fp;
-
- fp.len = pass->bf_len;
- fp.filter = (struct sock_filter *) pass->bf_insns;
- if (ioctl(ppp_dev_fd, PPPIOCSPASS, &fp) < 0) {
- if (errno == ENOTTY)
- warn("kernel does not support PPP filtering");
- else
- error("Couldn't set pass-filter in kernel: %m");
- return 0;
- }
- fp.len = active->bf_len;
- fp.filter = (struct sock_filter *) active->bf_insns;
- if (ioctl(ppp_dev_fd, PPPIOCSACTIVE, &fp) < 0) {
- error("Couldn't set active-filter in kernel: %m");
- return 0;
- }
- return 1;
-}
-#endif /* PPP_FILTER */
-
-/********************************************************************
- *
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
- int u;
- struct ppp_idle *ip;
-{
- return ioctl(ppp_dev_fd, PPPIOCGIDLE, ip) >= 0;
-}
-
-/********************************************************************
- *
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
- int u;
- struct pppd_stats *stats;
-{
- struct ifpppstatsreq req;
-
- memset (&req, 0, sizeof (req));
-
- req.stats_ptr = (caddr_t) &req.stats;
- strlcpy(req.ifr__name, ifname, sizeof(req.ifr__name));
- if (ioctl(sock_fd, SIOCGPPPSTATS, &req) < 0) {
- error("Couldn't get PPP statistics: %m");
- return 0;
- }
- stats->bytes_in = req.stats.p.ppp_ibytes;
- stats->bytes_out = req.stats.p.ppp_obytes;
- return 1;
-}
-
-/********************************************************************
- *
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise. This is necessary because of patent nonsense.
- */
-
-int ccp_fatal_error (int unit)
-{
- int x = get_flags(ppp_dev_fd);
-
- return x & SC_DC_FERROR;
-}
-
-/********************************************************************
- *
- * path_to_procfs - find the path to the proc file system mount point
- */
-static char proc_path[MAXPATHLEN];
-static int proc_path_len;
-
-static char *path_to_procfs(const char *tail)
-{
- struct mntent *mntent;
- FILE *fp;
-
- if (proc_path_len == 0) {
- /* Default the mount location of /proc */
- strlcpy (proc_path, "/proc", sizeof(proc_path));
- proc_path_len = 5;
- fp = fopen(MOUNTED, "r");
- if (fp != NULL) {
- while ((mntent = getmntent(fp)) != NULL) {
- if (strcmp(mntent->mnt_type, MNTTYPE_IGNORE) == 0)
- continue;
- if (strcmp(mntent->mnt_type, "proc") == 0) {
- strlcpy(proc_path, mntent->mnt_dir, sizeof(proc_path));
- proc_path_len = strlen(proc_path);
- break;
- }
- }
- fclose (fp);
- }
- }
-
- strlcpy(proc_path + proc_path_len, tail,
- sizeof(proc_path) - proc_path_len);
- return proc_path;
-}
-
-/*
- * /proc/net/route parsing stuff.
- */
-#define ROUTE_MAX_COLS 12
-FILE *route_fd = (FILE *) 0;
-static char route_buffer[512];
-static int route_dev_col, route_dest_col, route_gw_col;
-static int route_flags_col, route_mask_col;
-static int route_num_cols;
-
-static int open_route_table (void);
-static void close_route_table (void);
-static int read_route_table (struct rtentry *rt);
-
-/********************************************************************
- *
- * close_route_table - close the interface to the route table
- */
-
-static void close_route_table (void)
-{
- if (route_fd != (FILE *) 0) {
- fclose (route_fd);
- route_fd = (FILE *) 0;
- }
-}
-
-/********************************************************************
- *
- * open_route_table - open the interface to the route table
- */
-static char route_delims[] = " \t\n";
-
-static int open_route_table (void)
-{
- char *path;
-
- close_route_table();
-
- path = path_to_procfs("/net/route");
- route_fd = fopen (path, "r");
- if (route_fd == NULL) {
- error("can't open routing table %s: %m", path);
- return 0;
- }
-
- route_dev_col = 0; /* default to usual columns */
- route_dest_col = 1;
- route_gw_col = 2;
- route_flags_col = 3;
- route_mask_col = 7;
- route_num_cols = 8;
-
- /* parse header line */
- if (fgets(route_buffer, sizeof(route_buffer), route_fd) != 0) {
- char *p = route_buffer, *q;
- int col;
- for (col = 0; col < ROUTE_MAX_COLS; ++col) {
- int used = 1;
- if ((q = strtok(p, route_delims)) == 0)
- break;
- if (strcasecmp(q, "iface") == 0)
- route_dev_col = col;
- else if (strcasecmp(q, "destination") == 0)
- route_dest_col = col;
- else if (strcasecmp(q, "gateway") == 0)
- route_gw_col = col;
- else if (strcasecmp(q, "flags") == 0)
- route_flags_col = col;
- else if (strcasecmp(q, "mask") == 0)
- route_mask_col = col;
- else
- used = 0;
- if (used && col >= route_num_cols)
- route_num_cols = col + 1;
- p = NULL;
- }
- }
-
- return 1;
-}
-
-/********************************************************************
- *
- * read_route_table - read the next entry from the route table
- */
-
-static int read_route_table(struct rtentry *rt)
-{
- char *cols[ROUTE_MAX_COLS], *p;
- int col;
-
- memset (rt, '\0', sizeof (struct rtentry));
-
- if (fgets (route_buffer, sizeof (route_buffer), route_fd) == (char *) 0)
- return 0;
-
- p = route_buffer;
- for (col = 0; col < route_num_cols; ++col) {
- cols[col] = strtok(p, route_delims);
- if (cols[col] == NULL)
- return 0; /* didn't get enough columns */
- p = NULL;
- }
-
- SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16);
- SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16);
- SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16);
-
- rt->rt_flags = (short) strtoul(cols[route_flags_col], NULL, 16);
- rt->rt_dev = cols[route_dev_col];
-
- return 1;
-}
-
-/********************************************************************
- *
- * defaultroute_exists - determine if there is a default route
- */
-
-static int defaultroute_exists (struct rtentry *rt)
-{
- int result = 0;
-
- if (!open_route_table())
- return 0;
-
- while (read_route_table(rt) != 0) {
- if ((rt->rt_flags & RTF_UP) == 0)
- continue;
-
- if (kernel_version > KVERSION(2,1,0) && SIN_ADDR(rt->rt_genmask) != 0)
- continue;
- if (SIN_ADDR(rt->rt_dst) == 0L) {
- result = 1;
- break;
- }
- }
-
- close_route_table();
- return result;
-}
-
-/*
- * have_route_to - determine if the system has any route to
- * a given IP address. `addr' is in network byte order.
- * Return value is 1 if yes, 0 if no, -1 if don't know.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-int have_route_to(u_int32_t addr)
-{
- struct rtentry rt;
- int result = 0;
-
- if (!open_route_table())
- return -1; /* don't know */
-
- while (read_route_table(&rt)) {
- if ((rt.rt_flags & RTF_UP) == 0 || strcmp(rt.rt_dev, ifname) == 0)
- continue;
- if ((addr & SIN_ADDR(rt.rt_genmask)) == SIN_ADDR(rt.rt_dst)) {
- result = 1;
- break;
- }
- }
-
- close_route_table();
- return result;
-}
-
-/********************************************************************
- *
- * sifdefaultroute - assign a default route through the address given.
- */
-
-int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
- struct rtentry rt;
-
- if (defaultroute_exists(&rt) && strcmp(rt.rt_dev, ifname) != 0) {
- u_int32_t old_gateway = SIN_ADDR(rt.rt_gateway);
-
- if (old_gateway != gateway)
- error("not replacing existing default route to %s [%I]",
- rt.rt_dev, old_gateway);
- return 0;
- }
-
- memset (&rt, '\0', sizeof (rt));
- SET_SA_FAMILY (rt.rt_dst, AF_INET);
- SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
- if (kernel_version > KVERSION(2,1,0)) {
- SET_SA_FAMILY (rt.rt_genmask, AF_INET);
- SIN_ADDR(rt.rt_genmask) = 0L;
- }
-
- SIN_ADDR(rt.rt_gateway) = gateway;
-
- rt.rt_flags = RTF_UP | RTF_GATEWAY;
- if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
- if ( ! ok_error ( errno ))
- error("default route ioctl(SIOCADDRT): %m(%d)", errno);
- return 0;
- }
-
- default_route_gateway = gateway;
- return 1;
-}
-
-/********************************************************************
- *
- * cifdefaultroute - delete a default route through the address given.
- */
-
-int cifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
- struct rtentry rt;
-
- default_route_gateway = 0;
-
- memset (&rt, '\0', sizeof (rt));
- SET_SA_FAMILY (rt.rt_dst, AF_INET);
- SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
- if (kernel_version > KVERSION(2,1,0)) {
- SET_SA_FAMILY (rt.rt_genmask, AF_INET);
- SIN_ADDR(rt.rt_genmask) = 0L;
- }
-
- SIN_ADDR(rt.rt_gateway) = gateway;
-
- rt.rt_flags = RTF_UP | RTF_GATEWAY;
- if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
- if (still_ppp()) {
- if ( ! ok_error ( errno ))
- error("default route ioctl(SIOCDELRT): %m (%d)", errno);
- return 0;
- }
- }
-
- return 1;
-}
-
-/********************************************************************
- *
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-
-int sifproxyarp (int unit, u_int32_t his_adr)
-{
- struct arpreq arpreq;
- char *forw_path;
-
- if (has_proxy_arp == 0) {
- memset (&arpreq, '\0', sizeof(arpreq));
-
- SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
- SIN_ADDR(arpreq.arp_pa) = his_adr;
- arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-/*
- * Get the hardware address of an interface on the same subnet
- * as our local address.
- */
- if (!get_ether_addr(his_adr, &arpreq.arp_ha, proxy_arp_dev,
- sizeof(proxy_arp_dev))) {
- error("Cannot determine ethernet address for proxy ARP");
- return 0;
- }
- strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
- if (ioctl(sock_fd, SIOCSARP, (caddr_t)&arpreq) < 0) {
- if ( ! ok_error ( errno ))
- error("ioctl(SIOCSARP): %m(%d)", errno);
- return 0;
- }
- proxy_arp_addr = his_adr;
- has_proxy_arp = 1;
-
- if (tune_kernel) {
- forw_path = path_to_procfs("/sys/net/ipv4/ip_forward");
- if (forw_path != 0) {
- int fd = open(forw_path, O_WRONLY);
- if (fd >= 0) {
- if (write(fd, "1", 1) != 1)
- error("Couldn't enable IP forwarding: %m");
- close(fd);
- }
- }
- }
- }
-
- return 1;
-}
-
-/********************************************************************
- *
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-
-int cifproxyarp (int unit, u_int32_t his_adr)
-{
- struct arpreq arpreq;
-
- if (has_proxy_arp) {
- has_proxy_arp = 0;
- memset (&arpreq, '\0', sizeof(arpreq));
- SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
- SIN_ADDR(arpreq.arp_pa) = his_adr;
- arpreq.arp_flags = ATF_PERM | ATF_PUBL;
- strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
- if (ioctl(sock_fd, SIOCDARP, (caddr_t)&arpreq) < 0) {
- if ( ! ok_error ( errno ))
- warn("ioctl(SIOCDARP): %m(%d)", errno);
- return 0;
- }
- }
- return 1;
-}
-
-/********************************************************************
- *
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-
-static int get_ether_addr (u_int32_t ipaddr,
- struct sockaddr *hwaddr,
- char *name, int namelen)
-{
- struct ifreq *ifr, *ifend;
- u_int32_t ina, mask;
- char *aliasp;
- struct ifreq ifreq;
- struct ifconf ifc;
- struct ifreq ifs[MAX_IFS];
-
- ifc.ifc_len = sizeof(ifs);
- ifc.ifc_req = ifs;
- if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
- if ( ! ok_error ( errno ))
- error("ioctl(SIOCGIFCONF): %m(%d)", errno);
- return 0;
- }
-
- SYSDEBUG ((LOG_DEBUG, "proxy arp: scanning %d interfaces for IP %s",
- ifc.ifc_len / sizeof(struct ifreq), ip_ntoa(ipaddr)));
-/*
- * Scan through looking for an interface with an Internet
- * address on the same subnet as `ipaddr'.
- */
- ifend = ifs + (ifc.ifc_len / sizeof(struct ifreq));
- for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
- if (ifr->ifr_addr.sa_family == AF_INET) {
- ina = SIN_ADDR(ifr->ifr_addr);
- strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
- SYSDEBUG ((LOG_DEBUG, "proxy arp: examining interface %s",
- ifreq.ifr_name));
-/*
- * Check that the interface is up, and not point-to-point
- * nor loopback.
- */
- if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
- continue;
-
- if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
- continue;
-/*
- * Get its netmask and check that it's on the right subnet.
- */
- if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
- continue;
-
- mask = SIN_ADDR(ifreq.ifr_addr);
- SYSDEBUG ((LOG_DEBUG, "proxy arp: interface addr %s mask %lx",
- ip_ntoa(ina), ntohl(mask)));
-
- if (((ipaddr ^ ina) & mask) != 0)
- continue;
- break;
- }
- }
-
- if (ifr >= ifend)
- return 0;
-
- strlcpy(name, ifreq.ifr_name, namelen);
-
- /* trim off the :1 in eth0:1 */
- aliasp = strchr(name, ':');
- if (aliasp != 0)
- *aliasp = 0;
-
- info("found interface %s for proxy arp", name);
-/*
- * Now get the hardware address.
- */
- memset (&ifreq.ifr_hwaddr, 0, sizeof (struct sockaddr));
- if (ioctl (sock_fd, SIOCGIFHWADDR, &ifreq) < 0) {
- error("SIOCGIFHWADDR(%s): %m(%d)", ifreq.ifr_name, errno);
- return 0;
- }
-
- memcpy (hwaddr,
- &ifreq.ifr_hwaddr,
- sizeof (struct sockaddr));
-
- SYSDEBUG ((LOG_DEBUG,
- "proxy arp: found hwaddr %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
- (int) ((unsigned char *) &hwaddr->sa_data)[0],
- (int) ((unsigned char *) &hwaddr->sa_data)[1],
- (int) ((unsigned char *) &hwaddr->sa_data)[2],
- (int) ((unsigned char *) &hwaddr->sa_data)[3],
- (int) ((unsigned char *) &hwaddr->sa_data)[4],
- (int) ((unsigned char *) &hwaddr->sa_data)[5],
- (int) ((unsigned char *) &hwaddr->sa_data)[6],
- (int) ((unsigned char *) &hwaddr->sa_data)[7]));
- return 1;
-}
-
-/*
- * get_if_hwaddr - get the hardware address for the specified
- * network interface device.
- */
-int
-get_if_hwaddr(u_char *addr, char *name)
-{
- struct ifreq ifreq;
- int ret, sock_fd;
-
- sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
- if (sock_fd < 0)
- return 0;
- memset(&ifreq.ifr_hwaddr, 0, sizeof(struct sockaddr));
- strlcpy(ifreq.ifr_name, name, sizeof(ifreq.ifr_name));
- ret = ioctl(sock_fd, SIOCGIFHWADDR, &ifreq);
- close(sock_fd);
- if (ret >= 0)
- memcpy(addr, ifreq.ifr_hwaddr.sa_data, 6);
- return ret;
-}
-
-/*
- * get_first_ethernet - return the name of the first ethernet-style
- * interface on this system.
- */
-char *
-get_first_ethernet()
-{
- return "eth0";
-}
-
-/********************************************************************
- *
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'. If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-
-u_int32_t GetMask (u_int32_t addr)
-{
- u_int32_t mask, nmask, ina;
- struct ifreq *ifr, *ifend, ifreq;
- struct ifconf ifc;
- struct ifreq ifs[MAX_IFS];
-
- addr = ntohl(addr);
-
- if (IN_CLASSA(addr)) /* determine network mask for address class */
- nmask = IN_CLASSA_NET;
- else if (IN_CLASSB(addr))
- nmask = IN_CLASSB_NET;
- else
- nmask = IN_CLASSC_NET;
-
- /* class D nets are disallowed by bad_ip_adrs */
- mask = netmask | htonl(nmask);
-/*
- * Scan through the system's network interfaces.
- */
- ifc.ifc_len = sizeof(ifs);
- ifc.ifc_req = ifs;
- if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
- if ( ! ok_error ( errno ))
- warn("ioctl(SIOCGIFCONF): %m(%d)", errno);
- return mask;
- }
-
- ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
- for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-/*
- * Check the interface's internet address.
- */
- if (ifr->ifr_addr.sa_family != AF_INET)
- continue;
- ina = SIN_ADDR(ifr->ifr_addr);
- if (((ntohl(ina) ^ addr) & nmask) != 0)
- continue;
-/*
- * Check that the interface is up, and not point-to-point nor loopback.
- */
- strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
- if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
- continue;
-
- if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
- continue;
-/*
- * Get its netmask and OR it into our mask.
- */
- if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
- continue;
- mask |= SIN_ADDR(ifreq.ifr_addr);
- break;
- }
- return mask;
-}
-
-/********************************************************************
- *
- * Internal routine to decode the version.modification.patch level
- */
-
-static void decode_version (char *buf, int *version,
- int *modification, int *patch)
-{
- char *endp;
-
- *version = (int) strtoul (buf, &endp, 10);
- *modification = 0;
- *patch = 0;
-
- if (endp != buf && *endp == '.') {
- buf = endp + 1;
- *modification = (int) strtoul (buf, &endp, 10);
- if (endp != buf && *endp == '.') {
- buf = endp + 1;
- *patch = (int) strtoul (buf, &buf, 10);
- }
- }
-}
-
-/********************************************************************
- *
- * Procedure to determine if the PPP line discipline is registered.
- */
-
-static int
-ppp_registered(void)
-{
- int local_fd;
- int mfd = -1;
- int ret = 0;
- char slave[16];
-
- /*
- * We used to open the serial device and set it to the ppp line
- * discipline here, in order to create a ppp unit. But that is
- * not a good idea - the user might have specified a device that
- * they can't open (permission, or maybe it doesn't really exist).
- * So we grab a pty master/slave pair and use that.
- */
- if (!get_pty(&mfd, &local_fd, slave, 0)) {
- no_ppp_msg = "Couldn't determine if PPP is supported (no free ptys)";
- return 0;
- }
-
- /*
- * Try to put the device into the PPP discipline.
- */
- if (ioctl(local_fd, TIOCSETD, &ppp_disc) < 0) {
- error("ioctl(TIOCSETD(PPP)): %m(%d)", errno);
- } else
- ret = 1;
-
- close(local_fd);
- close(mfd);
- return ret;
-}
-
-/********************************************************************
- *
- * ppp_available - check whether the system has any ppp interfaces
- * (in fact we check whether we can do an ioctl on ppp0).
- */
-
-int ppp_available(void)
-{
- int s, ok, fd;
- struct ifreq ifr;
- int size;
- int my_version, my_modification, my_patch;
- int osmaj, osmin, ospatch;
-
- no_ppp_msg =
- "This system lacks kernel support for PPP. This could be because\n"
- "the PPP kernel module could not be loaded, or because PPP was not\n"
- "included in the kernel configuration. If PPP was included as a\n"
- "module, try `/sbin/modprobe -v ppp'. If that fails, check that\n"
- "ppp.o exists in /lib/modules/`uname -r`/net.\n"
- "See README.linux file in the ppp distribution for more details.\n";
-
- /* get the kernel version now, since we are called before sys_init */
- uname(&utsname);
- osmaj = osmin = ospatch = 0;
- sscanf(utsname.release, "%d.%d.%d", &osmaj, &osmin, &ospatch);
- kernel_version = KVERSION(osmaj, osmin, ospatch);
-
- fd = open("/dev/ppp", O_RDWR);
-#if 0
- if (fd < 0 && errno == ENOENT) {
- /* try making it and see if that helps. */
- if (mknod("/dev/ppp", S_IFCHR | S_IRUSR | S_IWUSR,
- makedev(108, 0)) >= 0) {
- fd = open("/dev/ppp", O_RDWR);
- if (fd >= 0)
- info("Created /dev/ppp device node");
- else
- unlink("/dev/ppp"); /* didn't work, undo the mknod */
- } else if (errno == EEXIST) {
- fd = open("/dev/ppp", O_RDWR);
- }
- }
-#endif /* 0 */
- if (fd >= 0) {
- new_style_driver = 1;
-
- /* XXX should get from driver */
- driver_version = 2;
- driver_modification = 4;
- driver_patch = 0;
- close(fd);
- return 1;
- }
- if (kernel_version >= KVERSION(2,3,13)) {
- if (errno == ENOENT)
- no_ppp_msg =
- "pppd is unable to open the /dev/ppp device.\n"
- "You need to create the /dev/ppp device node by\n"
- "executing the following command as root:\n"
- " mknod /dev/ppp c 108 0\n";
- return 0;
- }
-
-/*
- * Open a socket for doing the ioctl operations.
- */
- s = socket(AF_INET, SOCK_DGRAM, 0);
- if (s < 0)
- return 0;
-
- strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
- ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-/*
- * If the device did not exist then attempt to create one by putting the
- * current tty into the PPP discipline. If this works then obtain the
- * flags for the device again.
- */
- if (!ok) {
- if (ppp_registered()) {
- strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
- ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
- }
- }
-/*
- * Ensure that the hardware address is for PPP and not something else
- */
- if (ok)
- ok = ioctl (s, SIOCGIFHWADDR, (caddr_t) &ifr) >= 0;
-
- if (ok && ((ifr.ifr_hwaddr.sa_family & ~0xFF) != ARPHRD_PPP))
- ok = 0;
-
-/*
- * This is the PPP device. Validate the version of the driver at this
- * point to ensure that this program will work with the driver.
- */
- if (ok) {
- char abBuffer [1024];
-
- ifr.ifr_data = abBuffer;
- size = ioctl (s, SIOCGPPPVER, (caddr_t) &ifr);
- if (size < 0) {
- error("Couldn't read driver version: %m");
- ok = 0;
- no_ppp_msg = "Sorry, couldn't verify kernel driver version\n";
-
- } else {
- decode_version(abBuffer,
- &driver_version,
- &driver_modification,
- &driver_patch);
-/*
- * Validate the version of the driver against the version that we used.
- */
- decode_version(VERSION,
- &my_version,
- &my_modification,
- &my_patch);
-
- /* The version numbers must match */
- if (driver_version != my_version)
- ok = 0;
-
- /* The modification levels must be legal */
- if (driver_modification < 3) {
- if (driver_modification >= 2) {
- /* we can cope with 2.2.0 and above */
- driver_is_old = 1;
- } else {
- ok = 0;
- }
- }
-
- close (s);
- if (!ok) {
- slprintf(route_buffer, sizeof(route_buffer),
- "Sorry - PPP driver version %d.%d.%d is out of date\n",
- driver_version, driver_modification, driver_patch);
-
- no_ppp_msg = route_buffer;
- }
- }
- }
- return ok;
-}
-
-/********************************************************************
- *
- * Update the wtmp file with the appropriate user name and tty device.
- */
-
-void logwtmp (const char *line, const char *name, const char *host)
-{
- struct utmp ut, *utp;
- pid_t mypid = getpid();
-#if __GLIBC__ < 2
- int wtmp;
-#endif
-
-/*
- * Update the signon database for users.
- * Christoph Lameter: Copied from poeigl-1.36 Jan 3, 1996
- */
- utmpname(_PATH_UTMP);
- setutent();
- while ((utp = getutent()) && (utp->ut_pid != mypid))
- /* nothing */;
-
- /* Is this call really necessary? There is another one after the 'put' */
- endutent();
-
- if (utp)
- memcpy(&ut, utp, sizeof(ut));
- else
- /* some gettys/telnetds don't initialize utmp... */
- memset(&ut, 0, sizeof(ut));
-
- if (ut.ut_id[0] == 0)
- strncpy(ut.ut_id, line + 3, sizeof(ut.ut_id));
-
- strncpy(ut.ut_user, name, sizeof(ut.ut_user));
- strncpy(ut.ut_line, line, sizeof(ut.ut_line));
-
- time(&ut.ut_time);
-
- ut.ut_type = USER_PROCESS;
- ut.ut_pid = mypid;
-
- /* Insert the host name if one is supplied */
- if (*host)
- strncpy (ut.ut_host, host, sizeof(ut.ut_host));
-
- /* Insert the IP address of the remote system if IP is enabled */
- if (ipcp_protent.enabled_flag && ipcp_hisoptions[0].neg_addr)
- memcpy(&ut.ut_addr, (char *) &ipcp_hisoptions[0].hisaddr,
- sizeof(ut.ut_addr));
-
- /* CL: Makes sure that the logout works */
- if (*host == 0 && *name==0)
- ut.ut_host[0]=0;
-
- pututline(&ut);
- endutent();
-/*
- * Update the wtmp file.
- */
-#if __GLIBC__ >= 2
- updwtmp(_PATH_WTMP, &ut);
-#else
- wtmp = open(_PATH_WTMP, O_APPEND|O_WRONLY);
- if (wtmp >= 0) {
- flock(wtmp, LOCK_EX);
-
- if (write (wtmp, (char *)&ut, sizeof(ut)) != sizeof(ut))
- warn("error writing %s: %m", _PATH_WTMP);
-
- flock(wtmp, LOCK_UN);
-
- close (wtmp);
- }
-#endif
-}
-
-
-/********************************************************************
- *
- * sifvjcomp - config tcp header compression
- */
-
-int sifvjcomp (int u, int vjcomp, int cidcomp, int maxcid)
-{
- u_int x = get_flags(ppp_dev_fd);
-
- if (vjcomp) {
- if (ioctl (ppp_dev_fd, PPPIOCSMAXCID, (caddr_t) &maxcid) < 0) {
- if (! ok_error (errno))
- error("ioctl(PPPIOCSMAXCID): %m(%d)", errno);
- vjcomp = 0;
- }
- }
-
- x = vjcomp ? x | SC_COMP_TCP : x &~ SC_COMP_TCP;
- x = cidcomp ? x & ~SC_NO_TCP_CCID : x | SC_NO_TCP_CCID;
- set_flags (ppp_dev_fd, x);
-
- return 1;
-}
-
-/********************************************************************
- *
- * sifup - Config the interface up and enable IP packets to pass.
- */
-
-int sifup(int u)
-{
- struct ifreq ifr;
-
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
- if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
- return 0;
- }
-
- ifr.ifr_flags |= (IFF_UP | IFF_POINTOPOINT);
- if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
- return 0;
- }
- if_is_up++;
-
- return 1;
-}
-
-/********************************************************************
- *
- * sifdown - Disable the indicated protocol and config the interface
- * down if there are no remaining protocols.
- */
-
-int sifdown (int u)
-{
- struct ifreq ifr;
-
- if (if_is_up && --if_is_up > 0)
- return 1;
-
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
- if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
- return 0;
- }
-
- ifr.ifr_flags &= ~IFF_UP;
- ifr.ifr_flags |= IFF_POINTOPOINT;
- if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
- return 0;
- }
- return 1;
-}
-
-/********************************************************************
- *
- * sifaddr - Config the interface IP addresses and netmask.
- */
-
-int sifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr,
- u_int32_t net_mask)
-{
- struct ifreq ifr;
- struct rtentry rt;
-
- memset (&ifr, '\0', sizeof (ifr));
- memset (&rt, '\0', sizeof (rt));
-
- SET_SA_FAMILY (ifr.ifr_addr, AF_INET);
- SET_SA_FAMILY (ifr.ifr_dstaddr, AF_INET);
- SET_SA_FAMILY (ifr.ifr_netmask, AF_INET);
-
- strlcpy (ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-/*
- * Set our IP address
- */
- SIN_ADDR(ifr.ifr_addr) = our_adr;
- if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
- if (errno != EEXIST) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFADDR): %m(%d)", errno);
- }
- else {
- warn("ioctl(SIOCSIFADDR): Address already exists");
- }
- return (0);
- }
-/*
- * Set the gateway address
- */
- SIN_ADDR(ifr.ifr_dstaddr) = his_adr;
- if (ioctl(sock_fd, SIOCSIFDSTADDR, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFDSTADDR): %m(%d)", errno);
- return (0);
- }
-/*
- * Set the netmask.
- * For recent kernels, force the netmask to 255.255.255.255.
- */
- if (kernel_version >= KVERSION(2,1,16))
- net_mask = ~0L;
- if (net_mask != 0) {
- SIN_ADDR(ifr.ifr_netmask) = net_mask;
- if (ioctl(sock_fd, SIOCSIFNETMASK, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCSIFNETMASK): %m(%d)", errno);
- return (0);
- }
- }
-/*
- * Add the device route
- */
- if (kernel_version < KVERSION(2,1,16)) {
- SET_SA_FAMILY (rt.rt_dst, AF_INET);
- SET_SA_FAMILY (rt.rt_gateway, AF_INET);
- rt.rt_dev = ifname;
-
- SIN_ADDR(rt.rt_gateway) = 0L;
- SIN_ADDR(rt.rt_dst) = his_adr;
- rt.rt_flags = RTF_UP | RTF_HOST;
-
- if (kernel_version > KVERSION(2,1,0)) {
- SET_SA_FAMILY (rt.rt_genmask, AF_INET);
- SIN_ADDR(rt.rt_genmask) = -1L;
- }
-
- if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
- if (! ok_error (errno))
- error("ioctl(SIOCADDRT) device route: %m(%d)", errno);
- return (0);
- }
- }
-
- /* set ip_dynaddr in demand mode if address changes */
- if (demand && tune_kernel && !dynaddr_set
- && our_old_addr && our_old_addr != our_adr) {
- /* set ip_dynaddr if possible */
- char *path;
- int fd;
-
- path = path_to_procfs("/sys/net/ipv4/ip_dynaddr");
- if (path != 0 && (fd = open(path, O_WRONLY)) >= 0) {
- if (write(fd, "1", 1) != 1)
- error("Couldn't enable dynamic IP addressing: %m");
- close(fd);
- }
- dynaddr_set = 1; /* only 1 attempt */
- }
- our_old_addr = 0;
-
- return 1;
-}
-
-/********************************************************************
- *
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-
-int cifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr)
-{
- struct ifreq ifr;
-
- if (kernel_version < KVERSION(2,1,16)) {
-/*
- * Delete the route through the device
- */
- struct rtentry rt;
- memset (&rt, '\0', sizeof (rt));
-
- SET_SA_FAMILY (rt.rt_dst, AF_INET);
- SET_SA_FAMILY (rt.rt_gateway, AF_INET);
- rt.rt_dev = ifname;
-
- SIN_ADDR(rt.rt_gateway) = 0;
- SIN_ADDR(rt.rt_dst) = his_adr;
- rt.rt_flags = RTF_UP | RTF_HOST;
-
- if (kernel_version > KVERSION(2,1,0)) {
- SET_SA_FAMILY (rt.rt_genmask, AF_INET);
- SIN_ADDR(rt.rt_genmask) = -1L;
- }
-
- if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
- if (still_ppp() && ! ok_error (errno))
- error("ioctl(SIOCDELRT) device route: %m(%d)", errno);
- return (0);
- }
- }
-
- /* This way it is possible to have an IPX-only or IPv6-only interface */
- memset(&ifr, 0, sizeof(ifr));
- SET_SA_FAMILY(ifr.ifr_addr, AF_INET);
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
- if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno)) {
- error("ioctl(SIOCSIFADDR): %m(%d)", errno);
- return 0;
- }
- }
-
- our_old_addr = our_adr;
-
- return 1;
-}
-
-#ifdef INET6
-/********************************************************************
- *
- * sif6addr - Config the interface with an IPv6 link-local address
- */
-int sif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
- struct in6_ifreq ifr6;
- struct ifreq ifr;
- struct in6_rtmsg rt6;
-
- if (sock6_fd < 0) {
- errno = -sock6_fd;
- error("IPv6 socket creation failed: %m");
- return 0;
- }
- memset(&ifr, 0, sizeof (ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
- error("sif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
- return 0;
- }
-
- /* Local interface */
- memset(&ifr6, 0, sizeof(ifr6));
- IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
- ifr6.ifr6_ifindex = ifr.ifr_ifindex;
- ifr6.ifr6_prefixlen = 10;
-
- if (ioctl(sock6_fd, SIOCSIFADDR, &ifr6) < 0) {
- error("sif6addr: ioctl(SIOCSIFADDR): %m (%d)", errno);
- return 0;
- }
-
- /* Route to remote host */
- memset(&rt6, 0, sizeof(rt6));
- IN6_LLADDR_FROM_EUI64(rt6.rtmsg_dst, his_eui64);
- rt6.rtmsg_flags = RTF_UP;
- rt6.rtmsg_dst_len = 10;
- rt6.rtmsg_ifindex = ifr.ifr_ifindex;
- rt6.rtmsg_metric = 1;
-
- if (ioctl(sock6_fd, SIOCADDRT, &rt6) < 0) {
- error("sif6addr: ioctl(SIOCADDRT): %m (%d)", errno);
- return 0;
- }
-
- return 1;
-}
-
-
-/********************************************************************
- *
- * cif6addr - Remove IPv6 address from interface
- */
-int cif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
- struct ifreq ifr;
- struct in6_ifreq ifr6;
-
- if (sock6_fd < 0) {
- errno = -sock6_fd;
- error("IPv6 socket creation failed: %m");
- return 0;
- }
- memset(&ifr, 0, sizeof(ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
- error("cif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
- return 0;
- }
-
- memset(&ifr6, 0, sizeof(ifr6));
- IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
- ifr6.ifr6_ifindex = ifr.ifr_ifindex;
- ifr6.ifr6_prefixlen = 10;
-
- if (ioctl(sock6_fd, SIOCDIFADDR, &ifr6) < 0) {
- if (errno != EADDRNOTAVAIL) {
- if (! ok_error (errno))
- error("cif6addr: ioctl(SIOCDIFADDR): %m (%d)", errno);
- }
- else {
- warn("cif6addr: ioctl(SIOCDIFADDR): No such address");
- }
- return (0);
- }
- return 1;
-}
-#endif /* INET6 */
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side
- * to the uid given. Assumes slave_name points to >= 16 bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
- int *master_fdp;
- int *slave_fdp;
- char *slave_name;
- int uid;
-{
- int i, mfd, sfd = -1;
- char pty_name[16];
- struct termios tios;
-
-#ifdef TIOCGPTN
- /*
- * Try the unix98 way first.
- */
- mfd = open("/dev/ptmx", O_RDWR);
- if (mfd >= 0) {
- int ptn;
- if (ioctl(mfd, TIOCGPTN, &ptn) >= 0) {
- slprintf(pty_name, sizeof(pty_name), "/dev/pts/%d", ptn);
- chmod(pty_name, S_IRUSR | S_IWUSR);
-#ifdef TIOCSPTLCK
- ptn = 0;
- if (ioctl(mfd, TIOCSPTLCK, &ptn) < 0)
- warn("Couldn't unlock pty slave %s: %m", pty_name);
-#endif
- if ((sfd = open(pty_name, O_RDWR | O_NOCTTY)) < 0)
- warn("Couldn't open pty slave %s: %m", pty_name);
- }
- }
-#endif /* TIOCGPTN */
-
- if (sfd < 0) {
- /* the old way - scan through the pty name space */
- for (i = 0; i < 64; ++i) {
- slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
- 'p' + i / 16, i % 16);
- mfd = open(pty_name, O_RDWR, 0);
- if (mfd >= 0) {
- pty_name[5] = 't';
- sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
- if (sfd >= 0) {
- fchown(sfd, uid, -1);
- fchmod(sfd, S_IRUSR | S_IWUSR);
- break;
- }
- close(mfd);
- }
- }
- }
-
- if (sfd < 0)
- return 0;
-
- strlcpy(slave_name, pty_name, 16);
- *master_fdp = mfd;
- *slave_fdp = sfd;
- if (tcgetattr(sfd, &tios) == 0) {
- tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
- tios.c_cflag |= CS8 | CREAD | CLOCAL;
- tios.c_iflag = IGNPAR;
- tios.c_oflag = 0;
- tios.c_lflag = 0;
- if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
- warn("couldn't set attributes on pty: %m");
- } else
- warn("couldn't get attributes on pty: %m");
-
- return 1;
-}
-
-/********************************************************************
- *
- * open_loopback - open the device we use for getting packets
- * in demand mode. Under Linux, we use a pty master/slave pair.
- */
-int
-open_ppp_loopback(void)
-{
- int flags;
-
- looped = 1;
- if (new_style_driver) {
- /* allocate ourselves a ppp unit */
- if (make_ppp_unit() < 0)
- die(1);
- set_flags(ppp_dev_fd, SC_LOOP_TRAFFIC);
- set_kdebugflag(kdebugflag);
- ppp_fd = -1;
- return ppp_dev_fd;
- }
-
- if (!get_pty(&master_fd, &slave_fd, loop_name, 0))
- fatal("No free pty for loopback");
- SYSDEBUG(("using %s for loopback", loop_name));
-
- set_ppp_fd(slave_fd);
-
- flags = fcntl(master_fd, F_GETFL);
- if (flags == -1 ||
- fcntl(master_fd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set master loopback to nonblock: %m(%d)", errno);
-
- flags = fcntl(ppp_fd, F_GETFL);
- if (flags == -1 ||
- fcntl(ppp_fd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set slave loopback to nonblock: %m(%d)", errno);
-
- if (ioctl(ppp_fd, TIOCSETD, &ppp_disc) < 0)
- fatal("ioctl(TIOCSETD): %m(%d)", errno);
-/*
- * Find out which interface we were given.
- */
- if (ioctl(ppp_fd, PPPIOCGUNIT, &ifunit) < 0)
- fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-/*
- * Enable debug in the driver if requested.
- */
- set_kdebugflag (kdebugflag);
-
- return master_fd;
-}
-
-/********************************************************************
- *
- * restore_loop - reattach the ppp unit to the loopback.
- *
- * The kernel ppp driver automatically reattaches the ppp unit to
- * the loopback if the serial port is set to a line discipline other
- * than ppp, or if it detects a modem hangup. The former will happen
- * in disestablish_ppp if the latter hasn't already happened, so we
- * shouldn't need to do anything.
- *
- * Just to be sure, set the real serial port to the normal discipline.
- */
-
-static void
-restore_loop(void)
-{
- looped = 1;
- if (new_style_driver) {
- set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_LOOP_TRAFFIC);
- return;
- }
- if (ppp_fd != slave_fd) {
- (void) ioctl(ppp_fd, TIOCSETD, &tty_disc);
- set_ppp_fd(slave_fd);
- }
-}
-
-/********************************************************************
- *
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-
-int
-sifnpmode(u, proto, mode)
- int u;
- int proto;
- enum NPmode mode;
-{
- struct npioctl npi;
-
- npi.protocol = proto;
- npi.mode = mode;
- if (ioctl(ppp_dev_fd, PPPIOCSNPMODE, (caddr_t) &npi) < 0) {
- if (! ok_error (errno))
- error("ioctl(PPPIOCSNPMODE, %d, %d): %m (%d)",
- proto, mode, errno);
- return 0;
- }
- return 1;
-}
-
-
-/********************************************************************
- *
- * sipxfaddr - Config the interface IPX networknumber
- */
-
-int sipxfaddr (int unit, unsigned long int network, unsigned char * node )
-{
- int result = 1;
-
-#ifdef IPX_CHANGE
- int skfd;
- struct ifreq ifr;
- struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
- skfd = socket (AF_IPX, SOCK_DGRAM, 0);
- if (skfd < 0) {
- if (! ok_error (errno))
- dbglog("socket(AF_IPX): %m (%d)", errno);
- result = 0;
- }
- else {
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
- memcpy (sipx->sipx_node, node, IPX_NODE_LEN);
- sipx->sipx_family = AF_IPX;
- sipx->sipx_port = 0;
- sipx->sipx_network = htonl (network);
- sipx->sipx_type = IPX_FRAME_ETHERII;
- sipx->sipx_action = IPX_CRTITF;
-/*
- * Set the IPX device
- */
- if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
- result = 0;
- if (errno != EEXIST) {
- if (! ok_error (errno))
- dbglog("ioctl(SIOCSIFADDR, CRTITF): %m (%d)", errno);
- }
- else {
- warn("ioctl(SIOCSIFADDR, CRTITF): Address already exists");
- }
- }
- close (skfd);
- }
-#endif
- return result;
-}
-
-/********************************************************************
- *
- * cipxfaddr - Clear the information for the IPX network. The IPX routes
- * are removed and the device is no longer able to pass IPX
- * frames.
- */
-
-int cipxfaddr (int unit)
-{
- int result = 1;
-
-#ifdef IPX_CHANGE
- int skfd;
- struct ifreq ifr;
- struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
- skfd = socket (AF_IPX, SOCK_DGRAM, 0);
- if (skfd < 0) {
- if (! ok_error (errno))
- dbglog("socket(AF_IPX): %m (%d)", errno);
- result = 0;
- }
- else {
- memset (&ifr, '\0', sizeof (ifr));
- strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
- sipx->sipx_type = IPX_FRAME_ETHERII;
- sipx->sipx_action = IPX_DLTITF;
- sipx->sipx_family = AF_IPX;
-/*
- * Set the IPX device
- */
- if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
- if (! ok_error (errno))
- info("ioctl(SIOCSIFADDR, IPX_DLTITF): %m (%d)", errno);
- result = 0;
- }
- close (skfd);
- }
-#endif
- return result;
-}
-
-/*
- * Use the hostname as part of the random number seed.
- */
-int
-get_host_seed()
-{
- int h;
- char *p = hostname;
-
- h = 407;
- for (p = hostname; *p != 0; ++p)
- h = h * 37 + *p;
- return h;
-}
-
-/********************************************************************
- *
- * sys_check_options - check the options that the user specified
- */
-
-int
-sys_check_options(void)
-{
-#ifdef IPX_CHANGE
-/*
- * Disable the IPX protocol if the support is not present in the kernel.
- */
- char *path;
-
- if (ipxcp_protent.enabled_flag) {
- struct stat stat_buf;
- if ((path = path_to_procfs("/net/ipx_interface")) == 0
- || lstat(path, &stat_buf) < 0) {
- error("IPX support is not present in the kernel\n");
- ipxcp_protent.enabled_flag = 0;
- }
- }
-#endif
- if (demand && driver_is_old) {
- option_error("demand dialling is not supported by kernel driver "
- "version %d.%d.%d", driver_version, driver_modification,
- driver_patch);
- return 0;
- }
- if (multilink && !new_style_driver) {
- warn("Warning: multilink is not supported by the kernel driver");
- multilink = 0;
- }
- return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/sys-solaris.c b/mdk-stage1/ppp/pppd/sys-solaris.c
deleted file mode 100644
index da5f9c45a..000000000
--- a/mdk-stage1/ppp/pppd/sys-solaris.c
+++ /dev/null
@@ -1,2737 +0,0 @@
-/*
- * System-dependent procedures for pppd under Solaris 2.
- *
- * Parts re-written by Adi Masputra <adi.masputra@sun.com>, based on
- * the original sys-svr4.c
- *
- * Copyright (c) 2000 by Sun Microsystems, Inc.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.
- *
- * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF
- * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
- * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SUN SHALL NOT BE LIABLE FOR
- * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
- * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#define RCSID "$Id$"
-
-#include <limits.h>
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <termios.h>
-#ifndef CRTSCTS
-#include <sys/termiox.h>
-#endif
-#include <signal.h>
-#include <utmpx.h>
-#include <sys/types.h>
-#include <sys/ioccom.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <sys/sysmacros.h>
-#include <sys/systeminfo.h>
-#include <sys/dlpi.h>
-#include <sys/stat.h>
-#include <sys/mkdev.h>
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/route.h>
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include <netinet/in.h>
-#ifdef SOL2
-#include <sys/tihdr.h>
-#include <sys/tiuser.h>
-#include <inet/common.h>
-#include <inet/mib2.h>
-#include <sys/ethernet.h>
-#endif
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "ipcp.h"
-#include "ccp.h"
-
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME "ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
-#if !defined(PPP_DEV_NAME)
-#define PPP_DEV_NAME "/dev/" PPP_DRV_NAME
-#endif /* !defined(PPP_DEV_NAME) */
-
-#if !defined(AHDLC_MOD_NAME)
-#define AHDLC_MOD_NAME "ppp_ahdl"
-#endif /* !defined(AHDLC_MOD_NAME) */
-
-#if !defined(COMP_MOD_NAME)
-#define COMP_MOD_NAME "ppp_comp"
-#endif /* !defined(COMP_MOD_NAME) */
-
-#if !defined(IP_DEV_NAME)
-#define IP_DEV_NAME "/dev/ip"
-#endif /* !defined(IP_DEV_NAME) */
-
-#if !defined(IP_MOD_NAME)
-#define IP_MOD_NAME "ip"
-#endif /* !defined(IP_MOD_NAME) */
-
-#if !defined(UDP_DEV_NAME) && defined(SOL2)
-#define UDP_DEV_NAME "/dev/udp"
-#endif /* !defined(UDP_DEV_NAME) && defined(SOL2) */
-
-#if !defined(UDP6_DEV_NAME) && defined(SOL2)
-#define UDP6_DEV_NAME "/dev/udp6"
-#endif /* !defined(UDP6_DEV_NAME) && defined(SOL2) */
-
-static const char rcsid[] = RCSID;
-
-#if defined(SOL2)
-/*
- * "/dev/udp" is used as a multiplexor to PLINK the interface stream
- * under. It is used in place of "/dev/ip" since STREAMS will not let
- * a driver be PLINK'ed under itself, and "/dev/ip" is typically the
- * driver at the bottom of the tunneling interfaces stream.
- */
-static char *mux_dev_name = UDP_DEV_NAME;
-#else
-static char *mux_dev_name = IP_DEV_NAME;
-#endif
-static int pppfd;
-static int fdmuxid = -1;
-static int ipfd;
-static int ipmuxid = -1;
-
-#if defined(INET6) && defined(SOL2)
-static int ip6fd; /* IP file descriptor */
-static int ip6muxid = -1; /* Multiplexer file descriptor */
-static int if6_is_up = 0; /* IPv6 interface has been marked up */
-
-#define _IN6_LLX_FROM_EUI64(l, s, eui64, as) do { \
- s->sin6_addr.s6_addr32[0] = htonl(as); \
- eui64_copy(eui64, s->sin6_addr.s6_addr32[2]); \
- s->sin6_family = AF_INET6; \
- l.lifr_addr.ss_family = AF_INET6; \
- l.lifr_addrlen = 10; \
- l.lifr_addr = laddr; \
- } while (0)
-
-#define IN6_LLADDR_FROM_EUI64(l, s, eui64) \
- _IN6_LLX_FROM_EUI64(l, s, eui64, 0xfe800000)
-
-#define IN6_LLTOKEN_FROM_EUI64(l, s, eui64) \
- _IN6_LLX_FROM_EUI64(l, s, eui64, 0)
-
-#endif /* defined(INET6) && defined(SOL2) */
-
-#if defined(INET6) && defined(SOL2)
-static char first_ether_name[LIFNAMSIZ]; /* Solaris 8 and above */
-#else
-static char first_ether_name[IFNAMSIZ]; /* Before Solaris 8 */
-#define MAXIFS 256 /* Max # of interfaces */
-#endif /* defined(INET6) && defined(SOL2) */
-
-static int restore_term;
-static struct termios inittermios;
-#ifndef CRTSCTS
-static struct termiox inittermiox;
-static int termiox_ok;
-#endif
-static struct winsize wsinfo; /* Initial window size info */
-static pid_t tty_sid; /* original session ID for terminal */
-
-extern u_char inpacket_buf[]; /* borrowed from main.c */
-
-#define MAX_POLLFDS 32
-static struct pollfd pollfds[MAX_POLLFDS];
-static int n_pollfds;
-
-static int link_mtu, link_mru;
-
-#define NMODULES 32
-static int tty_nmodules;
-static char tty_modules[NMODULES][FMNAMESZ+1];
-static int tty_npushed;
-
-static int if_is_up; /* Interface has been marked up */
-static u_int32_t remote_addr; /* IP address of peer */
-static u_int32_t default_route_gateway; /* Gateway for default route added */
-static u_int32_t proxy_arp_addr; /* Addr for proxy arp entry added */
-
-/* Prototypes for procedures local to this file. */
-static int translate_speed __P((int));
-static int baud_rate_of __P((int));
-static int get_ether_addr __P((u_int32_t, struct sockaddr *));
-static int get_hw_addr __P((char *, u_int32_t, struct sockaddr *));
-static int get_hw_addr_dlpi __P((char *, struct sockaddr *));
-static int dlpi_attach __P((int, int));
-static int dlpi_info_req __P((int));
-static int dlpi_get_reply __P((int, union DL_primitives *, int, int));
-static int strioctl __P((int, int, void *, int, int));
-
-#ifdef SOL2
-/*
- * sifppa - Sets interface ppa
- *
- * without setting the ppa, ip module will return EINVAL upon setting the
- * interface UP (SIOCSxIFFLAGS). This is because ip module in 2.8 expects
- * two DLPI_INFO_REQ to be sent down to the driver (below ip) before
- * IFF_UP can be set. Plumbing the device causes one DLPI_INFO_REQ to
- * be sent down, and the second DLPI_INFO_REQ is sent upon receiving
- * IF_UNITSEL (old) or SIOCSLIFNAME (new) ioctls. Such setting of the ppa
- * is required because the ppp DLPI provider advertises itself as
- * a DLPI style 2 type, which requires a point of attachment to be
- * specified. The only way the user can specify a point of attachment
- * is via SIOCSLIFNAME or IF_UNITSEL.
- *
- * Such changes in the behavior of ip module was made to meet new or
- * evolving standards requirements.
- *
- */
-static int
-sifppa(fd, ppa)
- int fd;
- int ppa;
-{
- return (int)ioctl(fd, IF_UNITSEL, (char *)&ppa);
-}
-#endif /* SOL2 */
-
-#if defined(SOL2) && defined(INET6)
-/*
- * get_first_ethernet - returns the first Ethernet interface name found in
- * the system, or NULL if none is found
- *
- * NOTE: This is the lifreq version (Solaris 8 and above)
- */
-char *
-get_first_ethernet()
-{
- struct lifnum lifn;
- struct lifconf lifc;
- struct lifreq *plifreq;
- struct lifreq lifr;
- int fd, num_ifs, i, found;
- uint_t fl, req_size;
- char *req;
-
- fd = socket(AF_INET, SOCK_DGRAM, 0);
- if (fd < 0) {
- return 0;
- }
-
- /*
- * Find out how many interfaces are running
- */
- lifn.lifn_family = AF_UNSPEC;
- lifn.lifn_flags = LIFC_NOXMIT;
- if (ioctl(fd, SIOCGLIFNUM, &lifn) < 0) {
- close(fd);
- error("could not determine number of interfaces: %m");
- return 0;
- }
-
- num_ifs = lifn.lifn_count;
- req_size = num_ifs * sizeof(struct lifreq);
- req = malloc(req_size);
- if (req == NULL) {
- close(fd);
- error("out of memory");
- return 0;
- }
-
- /*
- * Get interface configuration info for all interfaces
- */
- lifc.lifc_family = AF_UNSPEC;
- lifc.lifc_flags = LIFC_NOXMIT;
- lifc.lifc_len = req_size;
- lifc.lifc_buf = req;
- if (ioctl(fd, SIOCGLIFCONF, &lifc) < 0) {
- close(fd);
- free(req);
- error("SIOCGLIFCONF: %m");
- return 0;
- }
-
- /*
- * And traverse each interface to look specifically for the first
- * occurence of an Ethernet interface which has been marked up
- */
- plifreq = lifc.lifc_req;
- found = 0;
- for (i = lifc.lifc_len / sizeof(struct lifreq); i > 0; i--, plifreq++) {
-
- if (strchr(plifreq->lifr_name, ':') != NULL)
- continue;
-
- memset(&lifr, 0, sizeof(lifr));
- strncpy(lifr.lifr_name, plifreq->lifr_name, sizeof(lifr.lifr_name));
- if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
- close(fd);
- free(req);
- error("SIOCGLIFFLAGS: %m");
- return 0;
- }
- fl = lifr.lifr_flags;
-
- if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
- != (IFF_UP | IFF_BROADCAST))
- continue;
-
- found = 1;
- break;
- }
- free(req);
- close(fd);
-
- if (found) {
- strncpy(first_ether_name, lifr.lifr_name, sizeof(first_ether_name));
- return (char *)first_ether_name;
- } else
- return NULL;
-}
-#else
-/*
- * get_first_ethernet - returns the first Ethernet interface name found in
- * the system, or NULL if none is found
- *
- * NOTE: This is the ifreq version (before Solaris 8).
- */
-char *
-get_first_ethernet()
-{
- struct ifconf ifc;
- struct ifreq *pifreq;
- struct ifreq ifr;
- int fd, num_ifs, i, found;
- uint_t fl, req_size;
- char *req;
-
- fd = socket(AF_INET, SOCK_DGRAM, 0);
- if (fd < 0) {
- return 0;
- }
-
- /*
- * Find out how many interfaces are running
- */
- if (ioctl(fd, SIOCGIFNUM, (char *)&num_ifs) < 0) {
- num_ifs = MAXIFS;
- }
-
- req_size = num_ifs * sizeof(struct ifreq);
- req = malloc(req_size);
- if (req == NULL) {
- close(fd);
- error("out of memory");
- return 0;
- }
-
- /*
- * Get interface configuration info for all interfaces
- */
- ifc.ifc_len = req_size;
- ifc.ifc_buf = req;
- if (ioctl(fd, SIOCGIFCONF, &ifc) < 0) {
- close(fd);
- free(req);
- error("SIOCGIFCONF: %m");
- return 0;
- }
-
- /*
- * And traverse each interface to look specifically for the first
- * occurence of an Ethernet interface which has been marked up
- */
- pifreq = ifc.ifc_req;
- found = 0;
- for (i = ifc.ifc_len / sizeof(struct ifreq); i > 0; i--, pifreq++) {
-
- if (strchr(pifreq->ifr_name, ':') != NULL)
- continue;
-
- memset(&ifr, 0, sizeof(ifr));
- strncpy(ifr.ifr_name, pifreq->ifr_name, sizeof(ifr.ifr_name));
- if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) {
- close(fd);
- free(req);
- error("SIOCGIFFLAGS: %m");
- return 0;
- }
- fl = ifr.ifr_flags;
-
- if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
- != (IFF_UP | IFF_BROADCAST))
- continue;
-
- found = 1;
- break;
- }
- free(req);
- close(fd);
-
- if (found) {
- strncpy(first_ether_name, ifr.ifr_name, sizeof(first_ether_name));
- return (char *)first_ether_name;
- } else
- return NULL;
-}
-#endif /* defined(SOL2) && defined(INET6) */
-
-#if defined(SOL2)
-/*
- * get_if_hwaddr - get the hardware address for the specified
- * network interface device.
- */
-int
-get_if_hwaddr(u_char *addr, char *if_name)
-{
- struct sockaddr s_eth_addr;
- struct ether_addr *eth_addr = (struct ether_addr *)&s_eth_addr.sa_data;
-
- if (if_name == NULL)
- return -1;
-
- /*
- * Send DL_INFO_REQ to the driver to solicit its MAC address
- */
- if (!get_hw_addr_dlpi(if_name, &s_eth_addr)) {
- error("could not obtain hardware address for %s", if_name);
- return -1;
- }
-
- memcpy(addr, eth_addr->ether_addr_octet, 6);
- return 1;
-}
-#endif /* SOL2 */
-
-#if defined(SOL2) && defined(INET6)
-/*
- * slifname - Sets interface ppa and flags
- *
- * in addition to the comments stated in sifppa(), IFF_IPV6 bit must
- * be set in order to declare this as an IPv6 interface
- */
-static int
-slifname(fd, ppa)
- int fd;
- int ppa;
-{
- struct lifreq lifr;
- int ret;
-
- memset(&lifr, 0, sizeof(lifr));
- ret = ioctl(fd, SIOCGLIFFLAGS, &lifr);
- if (ret < 0)
- goto slifname_done;
-
- lifr.lifr_flags |= IFF_IPV6;
- lifr.lifr_flags &= ~(IFF_BROADCAST | IFF_IPV4);
- lifr.lifr_ppa = ppa;
- strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-
- ret = ioctl(fd, SIOCSLIFNAME, &lifr);
-
-slifname_done:
- return ret;
-
-
-}
-
-
-/*
- * ether_to_eui64 - Convert 48-bit Ethernet address into 64-bit EUI
- *
- * walks the list of valid ethernet interfaces, and convert the first
- * found 48-bit MAC address into EUI 64. caller also assumes that
- * the system has a properly configured Ethernet interface for this
- * function to return non-zero.
- */
-int
-ether_to_eui64(eui64_t *p_eui64)
-{
- struct sockaddr s_eth_addr;
- struct ether_addr *eth_addr = (struct ether_addr *)&s_eth_addr.sa_data;
- char *if_name;
-
- if ((if_name = get_first_ethernet()) == NULL) {
- error("no persistent id can be found");
- return 0;
- }
-
- /*
- * Send DL_INFO_REQ to the driver to solicit its MAC address
- */
- if (!get_hw_addr_dlpi(if_name, &s_eth_addr)) {
- error("could not obtain hardware address for %s", if_name);
- return 0;
- }
-
- /*
- * And convert the EUI-48 into EUI-64, per RFC 2472 [sec 4.1]
- */
- p_eui64->e8[0] = (eth_addr->ether_addr_octet[0] & 0xFF) | 0x02;
- p_eui64->e8[1] = (eth_addr->ether_addr_octet[1] & 0xFF);
- p_eui64->e8[2] = (eth_addr->ether_addr_octet[2] & 0xFF);
- p_eui64->e8[3] = 0xFF;
- p_eui64->e8[4] = 0xFE;
- p_eui64->e8[5] = (eth_addr->ether_addr_octet[3] & 0xFF);
- p_eui64->e8[6] = (eth_addr->ether_addr_octet[4] & 0xFF);
- p_eui64->e8[7] = (eth_addr->ether_addr_octet[5] & 0xFF);
-
- return 1;
-}
-#endif /* defined(SOL2) && defined(INET6) */
-
-/*
- * sys_init - System-dependent initialization.
- */
-void
-sys_init()
-{
- int ifd, x;
- struct ifreq ifr;
-#if defined(INET6) && defined(SOL2)
- int i6fd;
- struct lifreq lifr;
-#endif /* defined(INET6) && defined(SOL2) */
-#if !defined(SOL2)
- struct {
- union DL_primitives prim;
- char space[64];
- } reply;
-#endif /* !defined(SOL2) */
-
- ipfd = open(mux_dev_name, O_RDWR, 0);
- if (ipfd < 0)
- fatal("Couldn't open IP device: %m");
-
-#if defined(INET6) && defined(SOL2)
- ip6fd = open(UDP6_DEV_NAME, O_RDWR, 0);
- if (ip6fd < 0)
- fatal("Couldn't open IP device (2): %m");
-#endif /* defined(INET6) && defined(SOL2) */
-
- if (default_device && !notty)
- tty_sid = getsid((pid_t)0);
-
- pppfd = open(PPP_DEV_NAME, O_RDWR | O_NONBLOCK, 0);
- if (pppfd < 0)
- fatal("Can't open %s: %m", PPP_DEV_NAME);
- if (kdebugflag & 1) {
- x = PPPDBG_LOG + PPPDBG_DRIVER;
- strioctl(pppfd, PPPIO_DEBUG, &x, sizeof(int), 0);
- }
-
- /* Assign a new PPA and get its unit number. */
- if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0)
- fatal("Can't create new PPP interface: %m");
-
-#if defined(SOL2)
- /*
- * Since sys_init() is called prior to ifname being set in main(),
- * we need to get the ifname now, otherwise slifname(), and others,
- * will fail, or maybe, I should move them to a later point ?
- * <adi.masputra@sun.com>
- */
- sprintf(ifname, PPP_DRV_NAME "%d", ifunit);
-#endif /* defined(SOL2) */
- /*
- * Open the ppp device again and link it under the ip multiplexor.
- * IP will assign a unit number which hopefully is the same as ifunit.
- * I don't know any way to be certain they will be the same. :-(
- */
- ifd = open(PPP_DEV_NAME, O_RDWR, 0);
- if (ifd < 0)
- fatal("Can't open %s (2): %m", PPP_DEV_NAME);
- if (kdebugflag & 1) {
- x = PPPDBG_LOG + PPPDBG_DRIVER;
- strioctl(ifd, PPPIO_DEBUG, &x, sizeof(int), 0);
- }
-
-#if defined(INET6) && defined(SOL2)
- i6fd = open(PPP_DEV_NAME, O_RDWR, 0);
- if (i6fd < 0) {
- close(ifd);
- fatal("Can't open %s (3): %m", PPP_DEV_NAME);
- }
- if (kdebugflag & 1) {
- x = PPPDBG_LOG + PPPDBG_DRIVER;
- strioctl(i6fd, PPPIO_DEBUG, &x, sizeof(int), 0);
- }
-#endif /* defined(INET6) && defined(SOL2) */
-
-#if defined(SOL2)
- if (ioctl(ifd, I_PUSH, IP_MOD_NAME) < 0) {
- close(ifd);
-#if defined(INET6)
- close(i6fd);
-#endif /* defined(INET6) */
- fatal("Can't push IP module: %m");
- }
-
- /*
- * Assign ppa according to the unit number returned by ppp device
- * after plumbing is completed above.
- */
- if (sifppa(ifd, ifunit) < 0) {
- close (ifd);
-#if defined(INET6)
- close(i6fd);
-#endif /* defined(INET6) */
- fatal("Can't set ppa for unit %d: %m", ifunit);
- }
-
-#if defined(INET6)
- /*
- * An IPv6 interface is created anyway, even when the user does not
- * explicitly enable it. Note that the interface will be marked
- * IPv6 during slifname().
- */
- if (ioctl(i6fd, I_PUSH, IP_MOD_NAME) < 0) {
- close(ifd);
- close(i6fd);
- fatal("Can't push IP module (2): %m");
- }
-
- /*
- * Assign ppa according to the unit number returned by ppp device
- * after plumbing is completed above. In addition, mark the interface
- * as an IPv6 interface.
- */
- if (slifname(i6fd, ifunit) < 0) {
- close(ifd);
- close(i6fd);
- fatal("Can't set ifname for unit %d: %m", ifunit);
- }
-#endif /* defined(INET6) */
-
- ipmuxid = ioctl(ipfd, I_PLINK, ifd);
- close(ifd);
- if (ipmuxid < 0) {
-#if defined(INET6)
- close(i6fd);
-#endif /* defined(INET6) */
- fatal("Can't I_PLINK PPP device to IP: %m");
- }
-
- memset(&ifr, 0, sizeof(ifr));
- sprintf(ifr.ifr_name, "%s", ifname);
- ifr.ifr_ip_muxid = ipmuxid;
-
- /*
- * In Sol 8 and later, STREAMS dynamic module plumbing feature exists.
- * This is so that an arbitrary module can be inserted, or deleted,
- * between ip module and the device driver without tearing down the
- * existing stream. Such feature requires the mux ids, which is set
- * by SIOCSIFMUXID (or SIOCLSIFMUXID).
- */
- if (ioctl(ipfd, SIOCSIFMUXID, &ifr) < 0) {
- ioctl(ipfd, I_PUNLINK, ipmuxid);
-#if defined(INET6)
- close(i6fd);
-#endif /* defined(INET6) */
- fatal("SIOCSIFMUXID: %m");
- }
-
-#else /* else if !defined(SOL2) */
-
- if (dlpi_attach(ifd, ifunit) < 0 ||
- dlpi_get_reply(ifd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0) {
- close(ifd);
- fatal("Can't attach to ppp%d: %m", ifunit);
- }
-
- ipmuxid = ioctl(ipfd, I_LINK, ifd);
- close(ifd);
- if (ipmuxid < 0)
- fatal("Can't link PPP device to IP: %m");
-#endif /* defined(SOL2) */
-
-#if defined(INET6) && defined(SOL2)
- ip6muxid = ioctl(ip6fd, I_PLINK, i6fd);
- close(i6fd);
- if (ip6muxid < 0) {
- ioctl(ipfd, I_PUNLINK, ipmuxid);
- fatal("Can't I_PLINK PPP device to IP (2): %m");
- }
-
- memset(&lifr, 0, sizeof(lifr));
- sprintf(lifr.lifr_name, "%s", ifname);
- lifr.lifr_ip_muxid = ip6muxid;
-
- /*
- * Let IP know of the mux id [see comment for SIOCSIFMUXID above]
- */
- if (ioctl(ip6fd, SIOCSLIFMUXID, &lifr) < 0) {
- ioctl(ipfd, I_PUNLINK, ipmuxid);
- ioctl(ip6fd, I_PUNLINK, ip6muxid);
- fatal("Can't link PPP device to IP (2): %m");
- }
-#endif /* defined(INET6) && defined(SOL2) */
-
-#if !defined(SOL2)
- /* Set the interface name for the link. */
- slprintf(ifr.ifr_name, sizeof(ifr.ifr_name), PPP_DRV_NAME "%d", ifunit);
- ifr.ifr_metric = ipmuxid;
- if (strioctl(ipfd, SIOCSIFNAME, (char *)&ifr, sizeof ifr, 0) < 0)
- fatal("Can't set interface name %s: %m", ifr.ifr_name);
-#endif /* !defined(SOL2) */
-
- n_pollfds = 0;
-}
-
-/*
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This should call die() because it's called from die().
- */
-void
-sys_cleanup()
-{
-#if defined(SOL2)
- struct ifreq ifr;
-#if defined(INET6)
- struct lifreq lifr;
-#endif /* defined(INET6) */
-#endif /* defined(SOL2) */
-
-#if defined(SOL2) && defined(INET6)
- if (if6_is_up)
- sif6down(0);
-#endif /* defined(SOL2) && defined(INET6) */
- if (if_is_up)
- sifdown(0);
- if (default_route_gateway)
- cifdefaultroute(0, default_route_gateway, default_route_gateway);
- if (proxy_arp_addr)
- cifproxyarp(0, proxy_arp_addr);
-#if defined(SOL2)
- /*
- * Make sure we ask ip what the muxid, because 'ifconfig modlist' will
- * unlink and re-link the modules, causing the muxid to change.
- */
- memset(&ifr, 0, sizeof(ifr));
- sprintf(ifr.ifr_name, "%s", ifname);
- if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
- error("SIOCGIFFLAGS: %m");
- return;
- }
-
- if (ioctl(ipfd, SIOCGIFMUXID, &ifr) < 0) {
- error("SIOCGIFMUXID: %m");
- return;
- }
-
- ipmuxid = ifr.ifr_ip_muxid;
-
- if (ioctl(ipfd, I_PUNLINK, ipmuxid) < 0) {
- error("Can't I_PUNLINK PPP from IP: %m");
- return;
- }
-#if defined(INET6)
- /*
- * Make sure we ask ip what the muxid, because 'ifconfig modlist' will
- * unlink and re-link the modules, causing the muxid to change.
- */
- memset(&lifr, 0, sizeof(lifr));
- sprintf(lifr.lifr_name, "%s", ifname);
- if (ioctl(ip6fd, SIOCGLIFFLAGS, &lifr) < 0) {
- error("SIOCGLIFFLAGS: %m");
- return;
- }
-
- if (ioctl(ip6fd, SIOCGLIFMUXID, &lifr) < 0) {
- error("SIOCGLIFMUXID: %m");
- return;
- }
-
- ip6muxid = lifr.lifr_ip_muxid;
-
- if (ioctl(ip6fd, I_PUNLINK, ip6muxid) < 0) {
- error("Can't I_PUNLINK PPP from IP (2): %m");
- }
-#endif /* defined(INET6) */
-#endif /* defined(SOL2) */
-}
-
-/*
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close()
-{
- close(ipfd);
-#if defined(INET6) && defined(SOL2)
- close(ip6fd);
-#endif /* defined(INET6) && defined(SOL2) */
- if (pppfd >= 0)
- close(pppfd);
-}
-
-/*
- * sys_check_options - check the options that the user specified
- */
-int
-sys_check_options()
-{
- return 1;
-}
-
-#if 0
-/*
- * daemon - Detach us from controlling terminal session.
- */
-int
-daemon(nochdir, noclose)
- int nochdir, noclose;
-{
- int pid;
-
- if ((pid = fork()) < 0)
- return -1;
- if (pid != 0)
- exit(0); /* parent dies */
- setsid();
- if (!nochdir)
- chdir("/");
- if (!noclose) {
- fclose(stdin); /* don't need stdin, stdout, stderr */
- fclose(stdout);
- fclose(stderr);
- }
- return 0;
-}
-#endif
-
-/*
- * ppp_available - check whether the system has any ppp interfaces
- */
-int
-ppp_available()
-{
- struct stat buf;
-
- return stat(PPP_DEV_NAME, &buf) >= 0;
-}
-
-/*
- * any_compressions - see if compression is enabled or not
- *
- * In the STREAMS implementation of kernel-portion pppd,
- * the comp STREAMS module performs the ACFC, PFC, as well
- * CCP and VJ compressions. However, if the user has explicitly
- * declare to not enable them from the command line, there is
- * no point of having the comp module be pushed on the stream.
- */
-static int
-any_compressions()
-{
- if ((!lcp_wantoptions[0].neg_accompression) &&
- (!lcp_wantoptions[0].neg_pcompression) &&
- (!ccp_protent.enabled_flag) &&
- (!ipcp_wantoptions[0].neg_vj)) {
- return 0;
- }
- return 1;
-}
-
-/*
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-int
-tty_establish_ppp(fd)
- int fd;
-{
- int i;
-
- /* Pop any existing modules off the tty stream. */
- for (i = 0;; ++i)
- if (ioctl(fd, I_LOOK, tty_modules[i]) < 0
- || strcmp(tty_modules[i], "ptem") == 0
- || ioctl(fd, I_POP, 0) < 0)
- break;
- tty_nmodules = i;
-
- /* Push the async hdlc module and the compressor module. */
- tty_npushed = 0;
-
- if(!sync_serial) {
- if (ioctl(fd, I_PUSH, AHDLC_MOD_NAME) < 0) {
- error("Couldn't push PPP Async HDLC module: %m");
- return -1;
- }
- ++tty_npushed;
- }
- if (kdebugflag & 4) {
- i = PPPDBG_LOG + PPPDBG_AHDLC;
- strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0);
- }
- /*
- * There's no need to push comp module if we don't intend
- * to compress anything
- */
- if (any_compressions()) {
- if (ioctl(fd, I_PUSH, COMP_MOD_NAME) < 0)
- error("Couldn't push PPP compression module: %m");
- else
- ++tty_npushed;
- }
-
- if (kdebugflag & 2) {
- i = PPPDBG_LOG;
- if (any_compressions())
- i += PPPDBG_COMP;
- strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0);
- }
-
- /* Link the serial port under the PPP multiplexor. */
- if ((fdmuxid = ioctl(pppfd, I_LINK, fd)) < 0) {
- error("Can't link tty to PPP mux: %m");
- return -1;
- }
-
- return pppfd;
-}
-
-/*
- * tty_disestablish_ppp - Restore the serial port to normal operation.
- * It attempts to reconstruct the stream with the previously popped
- * modules. This shouldn't call die() because it's called from die().
- */
-void
-tty_disestablish_ppp(fd)
- int fd;
-{
- int i;
-
- if (fdmuxid >= 0) {
- if (ioctl(pppfd, I_UNLINK, fdmuxid) < 0) {
- if (!hungup)
- error("Can't unlink tty from PPP mux: %m");
- }
- fdmuxid = -1;
-
- if (!hungup) {
- while (tty_npushed > 0 && ioctl(fd, I_POP, 0) >= 0)
- --tty_npushed;
- for (i = tty_nmodules - 1; i >= 0; --i)
- if (ioctl(fd, I_PUSH, tty_modules[i]) < 0)
- error("Couldn't restore tty module %s: %m",
- tty_modules[i]);
- }
- if (hungup && default_device && tty_sid > 0) {
- /*
- * If we have received a hangup, we need to send a SIGHUP
- * to the terminal's controlling process. The reason is
- * that the original stream head for the terminal hasn't
- * seen the M_HANGUP message (it went up through the ppp
- * driver to the stream head for our fd to /dev/ppp).
- */
- kill(tty_sid, SIGHUP);
- }
- }
-}
-
-/*
- * Check whether the link seems not to be 8-bit clean.
- */
-void
-clean_check()
-{
- int x;
- char *s;
-
- if (strioctl(pppfd, PPPIO_GCLEAN, &x, 0, sizeof(x)) < 0)
- return;
- s = NULL;
- switch (~x) {
- case RCV_B7_0:
- s = "bit 7 set to 1";
- break;
- case RCV_B7_1:
- s = "bit 7 set to 0";
- break;
- case RCV_EVNP:
- s = "odd parity";
- break;
- case RCV_ODDP:
- s = "even parity";
- break;
- }
- if (s != NULL) {
- warn("Serial link is not 8-bit clean:");
- warn("All received characters had %s", s);
- }
-}
-
-/*
- * List of valid speeds.
- */
-struct speed {
- int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
- { 50, B50 },
-#endif
-#ifdef B75
- { 75, B75 },
-#endif
-#ifdef B110
- { 110, B110 },
-#endif
-#ifdef B134
- { 134, B134 },
-#endif
-#ifdef B150
- { 150, B150 },
-#endif
-#ifdef B200
- { 200, B200 },
-#endif
-#ifdef B300
- { 300, B300 },
-#endif
-#ifdef B600
- { 600, B600 },
-#endif
-#ifdef B1200
- { 1200, B1200 },
-#endif
-#ifdef B1800
- { 1800, B1800 },
-#endif
-#ifdef B2000
- { 2000, B2000 },
-#endif
-#ifdef B2400
- { 2400, B2400 },
-#endif
-#ifdef B3600
- { 3600, B3600 },
-#endif
-#ifdef B4800
- { 4800, B4800 },
-#endif
-#ifdef B7200
- { 7200, B7200 },
-#endif
-#ifdef B9600
- { 9600, B9600 },
-#endif
-#ifdef B19200
- { 19200, B19200 },
-#endif
-#ifdef B38400
- { 38400, B38400 },
-#endif
-#ifdef EXTA
- { 19200, EXTA },
-#endif
-#ifdef EXTB
- { 38400, EXTB },
-#endif
-#ifdef B57600
- { 57600, B57600 },
-#endif
-#ifdef B76800
- { 76800, B76800 },
-#endif
-#ifdef B115200
- { 115200, B115200 },
-#endif
-#ifdef B153600
- { 153600, B153600 },
-#endif
-#ifdef B230400
- { 230400, B230400 },
-#endif
-#ifdef B307200
- { 307200, B307200 },
-#endif
-#ifdef B460800
- { 460800, B460800 },
-#endif
- { 0, 0 }
-};
-
-/*
- * Translate from bits/second to a speed_t.
- */
-static int
-translate_speed(bps)
- int bps;
-{
- struct speed *speedp;
-
- if (bps == 0)
- return 0;
- for (speedp = speeds; speedp->speed_int; speedp++)
- if (bps == speedp->speed_int)
- return speedp->speed_val;
- warn("speed %d not supported", bps);
- return 0;
-}
-
-/*
- * Translate from a speed_t to bits/second.
- */
-static int
-baud_rate_of(speed)
- int speed;
-{
- struct speed *speedp;
-
- if (speed == 0)
- return 0;
- for (speedp = speeds; speedp->speed_int; speedp++)
- if (speed == speedp->speed_val)
- return speedp->speed_int;
- return 0;
-}
-
-/*
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc. If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-void
-set_up_tty(fd, local)
- int fd, local;
-{
- int speed;
- struct termios tios;
-#if !defined (CRTSCTS)
- struct termiox tiox;
-#endif
-
- if (!sync_serial && tcgetattr(fd, &tios) < 0)
- fatal("tcgetattr: %m");
-
-#ifndef CRTSCTS
- termiox_ok = 1;
- if (!sync_serial && ioctl (fd, TCGETX, &tiox) < 0) {
- termiox_ok = 0;
- if (errno != ENOTTY)
- error("TCGETX: %m");
- }
-#endif
-
- if (!restore_term) {
- inittermios = tios;
-#ifndef CRTSCTS
- inittermiox = tiox;
-#endif
- if (!sync_serial)
- ioctl(fd, TIOCGWINSZ, &wsinfo);
- }
-
- tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
-#ifdef CRTSCTS
- if (crtscts > 0)
- tios.c_cflag |= CRTSCTS;
- else if (crtscts < 0)
- tios.c_cflag &= ~CRTSCTS;
-#else
- if (crtscts != 0 && !termiox_ok) {
- error("Can't set RTS/CTS flow control");
- } else if (crtscts > 0) {
- tiox.x_hflag |= RTSXOFF|CTSXON;
- } else if (crtscts < 0) {
- tiox.x_hflag &= ~(RTSXOFF|CTSXON);
- }
-#endif
-
- tios.c_cflag |= CS8 | CREAD | HUPCL;
- if (local || !modem)
- tios.c_cflag |= CLOCAL;
- tios.c_iflag = IGNBRK | IGNPAR;
- tios.c_oflag = 0;
- tios.c_lflag = 0;
- tios.c_cc[VMIN] = 1;
- tios.c_cc[VTIME] = 0;
-
- if (crtscts == -2) {
- tios.c_iflag |= IXON | IXOFF;
- tios.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */
- tios.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */
- }
-
- speed = translate_speed(inspeed);
- if (speed) {
- cfsetospeed(&tios, speed);
- cfsetispeed(&tios, speed);
- } else {
- speed = cfgetospeed(&tios);
- /*
- * We can't proceed if the serial port speed is 0,
- * since that implies that the serial port is disabled.
- */
- if ((speed == B0) && !sync_serial)
- fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
- }
-
- if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &tios) < 0)
- fatal("tcsetattr: %m");
-
-#ifndef CRTSCTS
- if (!sync_serial && termiox_ok && ioctl (fd, TCSETXF, &tiox) < 0){
- error("TCSETXF: %m");
- }
-#endif
-
- baud_rate = inspeed = baud_rate_of(speed);
- if (!sync_serial)
- restore_term = 1;
-}
-
-/*
- * restore_tty - restore the terminal to the saved settings.
- */
-void
-restore_tty(fd)
- int fd;
-{
- if (restore_term) {
- if (!default_device) {
- /*
- * Turn off echoing, because otherwise we can get into
- * a loop with the tty and the modem echoing to each other.
- * We presume we are the sole user of this tty device, so
- * when we close it, it will revert to its defaults anyway.
- */
- inittermios.c_lflag &= ~(ECHO | ECHONL);
- }
- if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
- if (!hungup && errno != ENXIO)
- warn("tcsetattr: %m");
-#ifndef CRTSCTS
- if (!sync_serial && ioctl (fd, TCSETXF, &inittermiox) < 0){
- if (!hungup && errno != ENXIO)
- error("TCSETXF: %m");
- }
-#endif
- if (!sync_serial)
- ioctl(fd, TIOCSWINSZ, &wsinfo);
- restore_term = 0;
- }
-}
-
-/*
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-void
-setdtr(fd, on)
-int fd, on;
-{
- int modembits = TIOCM_DTR;
-
- ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits);
-}
-
-/*
- * open_loopback - open the device we use for getting packets
- * in demand mode. Under Solaris 2, we use our existing fd
- * to the ppp driver.
- */
-int
-open_ppp_loopback()
-{
- return pppfd;
-}
-
-/*
- * output - Output PPP packet.
- */
-void
-output(unit, p, len)
- int unit;
- u_char *p;
- int len;
-{
- struct strbuf data;
- int retries;
- struct pollfd pfd;
-
- if (debug)
- dbglog("sent %P", p, len);
-
- data.len = len;
- data.buf = (caddr_t) p;
- retries = 4;
- while (putmsg(pppfd, NULL, &data, 0) < 0) {
- if (--retries < 0 || (errno != EWOULDBLOCK && errno != EAGAIN)) {
- if (errno != ENXIO)
- error("Couldn't send packet: %m");
- break;
- }
- pfd.fd = pppfd;
- pfd.events = POLLOUT;
- poll(&pfd, 1, 250); /* wait for up to 0.25 seconds */
- }
-}
-
-
-/*
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_input(timo)
- struct timeval *timo;
-{
- int t;
-
- t = timo == NULL? -1: timo->tv_sec * 1000 + timo->tv_usec / 1000;
- if (poll(pollfds, n_pollfds, t) < 0 && errno != EINTR)
- fatal("poll: %m");
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(fd)
- int fd;
-{
- int n;
-
- for (n = 0; n < n_pollfds; ++n)
- if (pollfds[n].fd == fd)
- return;
- if (n_pollfds < MAX_POLLFDS) {
- pollfds[n_pollfds].fd = fd;
- pollfds[n_pollfds].events = POLLIN | POLLPRI | POLLHUP;
- ++n_pollfds;
- } else
- error("Too many inputs!");
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(fd)
- int fd;
-{
- int n;
-
- for (n = 0; n < n_pollfds; ++n) {
- if (pollfds[n].fd == fd) {
- while (++n < n_pollfds)
- pollfds[n-1] = pollfds[n];
- --n_pollfds;
- break;
- }
- }
-}
-
-#if 0
-/*
- * wait_loop_output - wait until there is data available on the
- * loopback, for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_loop_output(timo)
- struct timeval *timo;
-{
- wait_input(timo);
-}
-
-/*
- * wait_time - wait for a given length of time or until a
- * signal is received.
- */
-void
-wait_time(timo)
- struct timeval *timo;
-{
- int n;
-
- n = select(0, NULL, NULL, NULL, timo);
- if (n < 0 && errno != EINTR)
- fatal("select: %m");
-}
-#endif
-
-
-/*
- * read_packet - get a PPP packet from the serial device.
- */
-int
-read_packet(buf)
- u_char *buf;
-{
- struct strbuf ctrl, data;
- int flags, len;
- unsigned char ctrlbuf[sizeof(union DL_primitives) + 64];
-
- for (;;) {
- data.maxlen = PPP_MRU + PPP_HDRLEN;
- data.buf = (caddr_t) buf;
- ctrl.maxlen = sizeof(ctrlbuf);
- ctrl.buf = (caddr_t) ctrlbuf;
- flags = 0;
- len = getmsg(pppfd, &ctrl, &data, &flags);
- if (len < 0) {
- if (errno == EAGAIN || errno == EINTR)
- return -1;
- fatal("Error reading packet: %m");
- }
-
- if (ctrl.len <= 0)
- return data.len;
-
- /*
- * Got a M_PROTO or M_PCPROTO message. Interpret it
- * as a DLPI primitive??
- */
- if (debug)
- dbglog("got dlpi prim 0x%x, len=%d",
- ((union DL_primitives *)ctrlbuf)->dl_primitive, ctrl.len);
-
- }
-}
-
-/*
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output()
-{
- int len;
- int rv = 0;
-
- while ((len = read_packet(inpacket_buf)) > 0) {
- if (loop_frame(inpacket_buf, len))
- rv = 1;
- }
- return rv;
-}
-
-/*
- * netif_set_mtu - set the MTU on the PPP network interface.
- */
-void
-netif_set_mtu(unit, mtu)
- int unit, mtu;
-{
- struct ifreq ifr;
-#if defined(INET6) && defined(SOL2)
- struct lifreq lifr;
- int fd;
-#endif /* defined(INET6) && defined(SOL2) */
-
- memset(&ifr, 0, sizeof(ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- ifr.ifr_metric = link_mtu;
- if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) {
- error("Couldn't set IP MTU (%s): %m", ifr.ifr_name);
- }
-
-#if defined(INET6) && defined(SOL2)
- fd = socket(AF_INET6, SOCK_DGRAM, 0);
- if (fd < 0)
- error("Couldn't open IPv6 socket: %m");
-
- memset(&lifr, 0, sizeof(lifr));
- strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
- lifr.lifr_mtu = link_mtu;
- if (ioctl(fd, SIOCSLIFMTU, &lifr) < 0) {
- close(fd);
- error("Couldn't set IPv6 MTU (%s): %m", ifr.ifr_name);
- }
- close(fd);
-#endif /* defined(INET6) && defined(SOL2) */
-}
-
-/*
- * tty_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-void
-tty_send_config(mtu, asyncmap, pcomp, accomp)
- int mtu;
- u_int32_t asyncmap;
- int pcomp, accomp;
-{
- int cf[2];
-
- link_mtu = mtu;
- if (strioctl(pppfd, PPPIO_MTU, &mtu, sizeof(mtu), 0) < 0) {
- if (hungup && errno == ENXIO)
- return;
- error("Couldn't set MTU: %m");
- }
- if (fdmuxid >= 0) {
- if (!sync_serial) {
- if (strioctl(pppfd, PPPIO_XACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
- error("Couldn't set transmit ACCM: %m");
- }
- }
- cf[0] = (pcomp? COMP_PROT: 0) + (accomp? COMP_AC: 0);
- cf[1] = COMP_PROT | COMP_AC;
- if (any_compressions() &&
- strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- error("Couldn't set prot/AC compression: %m");
- }
- }
-}
-
-/*
- * ppp_set_xaccm - set the extended transmit ACCM for the interface.
- */
-void
-tty_set_xaccm(accm)
- ext_accm accm;
-{
- if (sync_serial)
- return;
-
- if (fdmuxid >= 0
- && strioctl(pppfd, PPPIO_XACCM, accm, sizeof(ext_accm), 0) < 0) {
- if (!hungup || errno != ENXIO)
- warn("Couldn't set extended ACCM: %m");
- }
-}
-
-/*
- * ppp_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-void
-tty_recv_config(mru, asyncmap, pcomp, accomp)
- int mru;
- u_int32_t asyncmap;
- int pcomp, accomp;
-{
- int cf[2];
-
- link_mru = mru;
- if (strioctl(pppfd, PPPIO_MRU, &mru, sizeof(mru), 0) < 0) {
- if (hungup && errno == ENXIO)
- return;
- error("Couldn't set MRU: %m");
- }
- if (fdmuxid >= 0) {
- if (!sync_serial) {
- if (strioctl(pppfd, PPPIO_RACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
- error("Couldn't set receive ACCM: %m");
- }
- }
- cf[0] = (pcomp? DECOMP_PROT: 0) + (accomp? DECOMP_AC: 0);
- cf[1] = DECOMP_PROT | DECOMP_AC;
- if (any_compressions() &&
- strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- error("Couldn't set prot/AC decompression: %m");
- }
- }
-}
-
-/*
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-int
-ccp_test(unit, opt_ptr, opt_len, for_transmit)
- int unit, opt_len, for_transmit;
- u_char *opt_ptr;
-{
- if (strioctl(pppfd, (for_transmit? PPPIO_XCOMP: PPPIO_RCOMP),
- opt_ptr, opt_len, 0) >= 0)
- return 1;
- return (errno == ENOSR)? 0: -1;
-}
-
-/*
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-void
-ccp_flags_set(unit, isopen, isup)
- int unit, isopen, isup;
-{
- int cf[2];
-
- cf[0] = (isopen? CCP_ISOPEN: 0) + (isup? CCP_ISUP: 0);
- cf[1] = CCP_ISOPEN | CCP_ISUP | CCP_ERROR | CCP_FATALERROR;
- if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- if (!hungup || errno != ENXIO)
- error("Couldn't set kernel CCP state: %m");
- }
-}
-
-/*
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
- int u;
- struct ppp_idle *ip;
-{
- return strioctl(pppfd, PPPIO_GIDLE, ip, 0, sizeof(struct ppp_idle)) >= 0;
-}
-
-/*
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
- int u;
- struct pppd_stats *stats;
-{
- struct ppp_stats s;
-
- if (!sync_serial &&
- strioctl(pppfd, PPPIO_GETSTAT, &s, 0, sizeof(s)) < 0) {
- error("Couldn't get link statistics: %m");
- return 0;
- }
- stats->bytes_in = s.p.ppp_ibytes;
- stats->bytes_out = s.p.ppp_obytes;
- return 1;
-}
-
-#if 0
-/*
- * set_filters - transfer the pass and active filters to the kernel.
- */
-int
-set_filters(pass, active)
- struct bpf_program *pass, *active;
-{
- int ret = 1;
-
- if (pass->bf_len > 0) {
- if (strioctl(pppfd, PPPIO_PASSFILT, pass,
- sizeof(struct bpf_program), 0) < 0) {
- error("Couldn't set pass-filter in kernel: %m");
- ret = 0;
- }
- }
- if (active->bf_len > 0) {
- if (strioctl(pppfd, PPPIO_ACTIVEFILT, active,
- sizeof(struct bpf_program), 0) < 0) {
- error("Couldn't set active-filter in kernel: %m");
- ret = 0;
- }
- }
- return ret;
-}
-#endif
-
-/*
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise. This is necessary because of patent nonsense.
- */
-int
-ccp_fatal_error(unit)
- int unit;
-{
- int cf[2];
-
- cf[0] = cf[1] = 0;
- if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- if (errno != ENXIO && errno != EINVAL)
- error("Couldn't get compression flags: %m");
- return 0;
- }
- return cf[0] & CCP_FATALERROR;
-}
-
-/*
- * sifvjcomp - config tcp header compression
- */
-int
-sifvjcomp(u, vjcomp, xcidcomp, xmaxcid)
- int u, vjcomp, xcidcomp, xmaxcid;
-{
- int cf[2];
- char maxcid[2];
-
- if (vjcomp) {
- maxcid[0] = xcidcomp;
- maxcid[1] = 15; /* XXX should be rmaxcid */
- if (strioctl(pppfd, PPPIO_VJINIT, maxcid, sizeof(maxcid), 0) < 0) {
- error("Couldn't initialize VJ compression: %m");
- }
- }
-
- cf[0] = (vjcomp? COMP_VJC + DECOMP_VJC: 0) /* XXX this is wrong */
- + (xcidcomp? COMP_VJCCID + DECOMP_VJCCID: 0);
- cf[1] = COMP_VJC + DECOMP_VJC + COMP_VJCCID + DECOMP_VJCCID;
- if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- if (vjcomp)
- error("Couldn't enable VJ compression: %m");
- }
-
- return 1;
-}
-
-/*
- * sifup - Config the interface up and enable IP packets to pass.
- */
-int
-sifup(u)
- int u;
-{
- struct ifreq ifr;
-
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
- error("Couldn't mark interface up (get): %m");
- return 0;
- }
- ifr.ifr_flags |= IFF_UP;
- if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
- error("Couldn't mark interface up (set): %m");
- return 0;
- }
- if_is_up = 1;
- return 1;
-}
-
-/*
- * sifdown - Config the interface down and disable IP.
- */
-int
-sifdown(u)
- int u;
-{
- struct ifreq ifr;
-
- if (ipmuxid < 0)
- return 1;
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
- error("Couldn't mark interface down (get): %m");
- return 0;
- }
- ifr.ifr_flags &= ~IFF_UP;
- if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
- error("Couldn't mark interface down (set): %m");
- return 0;
- }
- if_is_up = 0;
- return 1;
-}
-
-/*
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-int
-sifnpmode(u, proto, mode)
- int u;
- int proto;
- enum NPmode mode;
-{
- int npi[2];
-
- npi[0] = proto;
- npi[1] = (int) mode;
- if (strioctl(pppfd, PPPIO_NPMODE, &npi, 2 * sizeof(int), 0) < 0) {
- error("ioctl(set NP %d mode to %d): %m", proto, mode);
- return 0;
- }
- return 1;
-}
-
-#if defined(SOL2) && defined(INET6)
-/*
- * sif6up - Config the IPv6 interface up and enable IPv6 packets to pass.
- */
-int
-sif6up(u)
- int u;
-{
- struct lifreq lifr;
- int fd;
-
- fd = socket(AF_INET6, SOCK_DGRAM, 0);
- if (fd < 0) {
- return 0;
- }
-
- memset(&lifr, 0, sizeof(lifr));
- strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
- if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
- close(fd);
- return 0;
- }
-
- lifr.lifr_flags |= IFF_UP;
- strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
- if (ioctl(fd, SIOCSLIFFLAGS, &lifr) < 0) {
- close(fd);
- return 0;
- }
-
- if6_is_up = 1;
- close(fd);
- return 1;
-}
-
-/*
- * sifdown - Config the IPv6 interface down and disable IPv6.
- */
-int
-sif6down(u)
- int u;
-{
- struct lifreq lifr;
- int fd;
-
- fd = socket(AF_INET6, SOCK_DGRAM, 0);
- if (fd < 0)
- return 0;
-
- memset(&lifr, 0, sizeof(lifr));
- strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
- if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
- close(fd);
- return 0;
- }
-
- lifr.lifr_flags &= ~IFF_UP;
- strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
- if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
- close(fd);
- return 0;
- }
-
- if6_is_up = 0;
- close(fd);
- return 1;
-}
-
-/*
- * sif6addr - Config the interface with an IPv6 link-local address
- */
-int
-sif6addr(u, o, h)
- int u;
- eui64_t o, h;
-{
- struct lifreq lifr;
- struct sockaddr_storage laddr;
- struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&laddr;
- int fd;
-
- fd = socket(AF_INET6, SOCK_DGRAM, 0);
- if (fd < 0)
- return 0;
-
- memset(&lifr, 0, sizeof(lifr));
- strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-
- /*
- * Do this because /dev/ppp responds to DL_PHYS_ADDR_REQ with
- * zero values, hence the interface token came to be zero too,
- * and without this, in.ndpd will complain
- */
- IN6_LLTOKEN_FROM_EUI64(lifr, sin6, o);
- if (ioctl(fd, SIOCSLIFTOKEN, &lifr) < 0) {
- close(fd);
- return 0;
- }
-
- /*
- * Set the interface address and destination address
- */
- IN6_LLADDR_FROM_EUI64(lifr, sin6, o);
- if (ioctl(fd, SIOCSLIFADDR, &lifr) < 0) {
- close(fd);
- return 0;
- }
-
- memset(&lifr, 0, sizeof(lifr));
- strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
- IN6_LLADDR_FROM_EUI64(lifr, sin6, h);
- if (ioctl(fd, SIOCSLIFDSTADDR, &lifr) < 0) {
- close(fd);
- return 0;
- }
-
- return 1;
-}
-
-/*
- * cif6addr - Remove the IPv6 address from interface
- */
-int
-cif6addr(u, o, h)
- int u;
- eui64_t o, h;
-{
- return 1;
-}
-
-#endif /* defined(SOL2) && defined(INET6) */
-
-
-#define INET_ADDR(x) (((struct sockaddr_in *) &(x))->sin_addr.s_addr)
-
-/*
- * sifaddr - Config the interface IP addresses and netmask.
- */
-int
-sifaddr(u, o, h, m)
- int u;
- u_int32_t o, h, m;
-{
- struct ifreq ifr;
- int ret = 1;
-
- memset(&ifr, 0, sizeof(ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- ifr.ifr_addr.sa_family = AF_INET;
- INET_ADDR(ifr.ifr_addr) = m;
- if (ioctl(ipfd, SIOCSIFNETMASK, &ifr) < 0) {
- error("Couldn't set IP netmask: %m");
- ret = 0;
- }
- ifr.ifr_addr.sa_family = AF_INET;
- INET_ADDR(ifr.ifr_addr) = o;
- if (ioctl(ipfd, SIOCSIFADDR, &ifr) < 0) {
- error("Couldn't set local IP address: %m");
- ret = 0;
- }
-
- /*
- * On some systems, we have to explicitly set the point-to-point
- * flag bit before we can set a destination address.
- */
- if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) >= 0
- && (ifr.ifr_flags & IFF_POINTOPOINT) == 0) {
- ifr.ifr_flags |= IFF_POINTOPOINT;
- if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
- error("Couldn't mark interface pt-to-pt: %m");
- ret = 0;
- }
- }
- ifr.ifr_dstaddr.sa_family = AF_INET;
- INET_ADDR(ifr.ifr_dstaddr) = h;
- if (ioctl(ipfd, SIOCSIFDSTADDR, &ifr) < 0) {
- error("Couldn't set remote IP address: %m");
- ret = 0;
- }
-#if 0 /* now done in ppp_send_config */
- ifr.ifr_metric = link_mtu;
- if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) {
- error("Couldn't set IP MTU: %m");
- }
-#endif
-
- remote_addr = h;
- return ret;
-}
-
-/*
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-int
-cifaddr(u, o, h)
- int u;
- u_int32_t o, h;
-{
-#if defined(__USLC__) /* was: #if 0 */
- cifroute(unit, ouraddr, hisaddr);
- if (ipmuxid >= 0) {
- notice("Removing ppp interface unit");
- if (ioctl(ipfd, I_UNLINK, ipmuxid) < 0) {
- error("Can't remove ppp interface unit: %m");
- return 0;
- }
- ipmuxid = -1;
- }
-#endif
- remote_addr = 0;
- return 1;
-}
-
-/*
- * sifdefaultroute - assign a default route through the address given.
- */
-int
-sifdefaultroute(u, l, g)
- int u;
- u_int32_t l, g;
-{
- struct rtentry rt;
-
-#if defined(__USLC__)
- g = l; /* use the local address as gateway */
-#endif
- memset(&rt, 0, sizeof(rt));
- rt.rt_dst.sa_family = AF_INET;
- INET_ADDR(rt.rt_dst) = 0;
- rt.rt_gateway.sa_family = AF_INET;
- INET_ADDR(rt.rt_gateway) = g;
- rt.rt_flags = RTF_GATEWAY;
-
- if (ioctl(ipfd, SIOCADDRT, &rt) < 0) {
- error("Can't add default route: %m");
- return 0;
- }
-
- default_route_gateway = g;
- return 1;
-}
-
-/*
- * cifdefaultroute - delete a default route through the address given.
- */
-int
-cifdefaultroute(u, l, g)
- int u;
- u_int32_t l, g;
-{
- struct rtentry rt;
-
-#if defined(__USLC__)
- g = l; /* use the local address as gateway */
-#endif
- memset(&rt, 0, sizeof(rt));
- rt.rt_dst.sa_family = AF_INET;
- INET_ADDR(rt.rt_dst) = 0;
- rt.rt_gateway.sa_family = AF_INET;
- INET_ADDR(rt.rt_gateway) = g;
- rt.rt_flags = RTF_GATEWAY;
-
- if (ioctl(ipfd, SIOCDELRT, &rt) < 0) {
- error("Can't delete default route: %m");
- return 0;
- }
-
- default_route_gateway = 0;
- return 1;
-}
-
-/*
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-int
-sifproxyarp(unit, hisaddr)
- int unit;
- u_int32_t hisaddr;
-{
- struct arpreq arpreq;
-
- memset(&arpreq, 0, sizeof(arpreq));
- if (!get_ether_addr(hisaddr, &arpreq.arp_ha))
- return 0;
-
- arpreq.arp_pa.sa_family = AF_INET;
- INET_ADDR(arpreq.arp_pa) = hisaddr;
- arpreq.arp_flags = ATF_PERM | ATF_PUBL;
- if (ioctl(ipfd, SIOCSARP, (caddr_t) &arpreq) < 0) {
- error("Couldn't set proxy ARP entry: %m");
- return 0;
- }
-
- proxy_arp_addr = hisaddr;
- return 1;
-}
-
-/*
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-int
-cifproxyarp(unit, hisaddr)
- int unit;
- u_int32_t hisaddr;
-{
- struct arpreq arpreq;
-
- memset(&arpreq, 0, sizeof(arpreq));
- arpreq.arp_pa.sa_family = AF_INET;
- INET_ADDR(arpreq.arp_pa) = hisaddr;
- if (ioctl(ipfd, SIOCDARP, (caddr_t)&arpreq) < 0) {
- error("Couldn't delete proxy ARP entry: %m");
- return 0;
- }
-
- proxy_arp_addr = 0;
- return 1;
-}
-
-/*
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-#define MAX_IFS 32
-
-static int
-get_ether_addr(ipaddr, hwaddr)
- u_int32_t ipaddr;
- struct sockaddr *hwaddr;
-{
- struct ifreq *ifr, *ifend, ifreq;
- int nif;
- struct ifconf ifc;
- u_int32_t ina, mask;
-
- /*
- * Scan through the system's network interfaces.
- */
-#ifdef SIOCGIFNUM
- if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0)
-#endif
- nif = MAX_IFS;
- ifc.ifc_len = nif * sizeof(struct ifreq);
- ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len);
- if (ifc.ifc_buf == 0)
- return 0;
- if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) {
- warn("Couldn't get system interface list: %m");
- free(ifc.ifc_buf);
- return 0;
- }
- ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
- for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) {
- if (ifr->ifr_addr.sa_family != AF_INET)
- continue;
- /*
- * Check that the interface is up, and not point-to-point or loopback.
- */
- strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
- if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0)
- continue;
- if ((ifreq.ifr_flags &
- (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
- != (IFF_UP|IFF_BROADCAST))
- continue;
- /*
- * Get its netmask and check that it's on the right subnet.
- */
- if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0)
- continue;
- ina = INET_ADDR(ifr->ifr_addr);
- mask = INET_ADDR(ifreq.ifr_addr);
- if ((ipaddr & mask) == (ina & mask))
- break;
- }
-
- if (ifr >= ifend) {
- warn("No suitable interface found for proxy ARP");
- free(ifc.ifc_buf);
- return 0;
- }
-
- info("found interface %s for proxy ARP", ifr->ifr_name);
- if (!get_hw_addr(ifr->ifr_name, ina, hwaddr)) {
- error("Couldn't get hardware address for %s", ifr->ifr_name);
- free(ifc.ifc_buf);
- return 0;
- }
-
- free(ifc.ifc_buf);
- return 1;
-}
-
-/*
- * get_hw_addr_dlpi - obtain the hardware address using DLPI
- */
-static int
-get_hw_addr_dlpi(name, hwaddr)
- char *name;
- struct sockaddr *hwaddr;
-{
- char *p, *q;
- int unit, iffd, adrlen;
- unsigned char *adrp;
- char ifdev[24];
- struct {
- union DL_primitives prim;
- char space[64];
- } reply;
-
- /*
- * We have to open the device and ask it for its hardware address.
- * First split apart the device name and unit.
- */
- slprintf(ifdev, sizeof(ifdev), "/dev/%s", name);
- for (q = ifdev + strlen(ifdev); --q >= ifdev; )
- if (!isdigit(*q))
- break;
- unit = atoi(q+1);
- q[1] = 0;
-
- /*
- * Open the device and do a DLPI attach and phys_addr_req.
- */
- iffd = open(ifdev, O_RDWR);
- if (iffd < 0) {
- error("Can't open %s: %m", ifdev);
- return 0;
- }
- if (dlpi_attach(iffd, unit) < 0
- || dlpi_get_reply(iffd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0
- || dlpi_info_req(iffd) < 0
- || dlpi_get_reply(iffd, &reply.prim, DL_INFO_ACK, sizeof(reply)) < 0) {
- close(iffd);
- return 0;
- }
-
- adrlen = reply.prim.info_ack.dl_addr_length;
- adrp = (unsigned char *)&reply + reply.prim.info_ack.dl_addr_offset;
-
-#if DL_CURRENT_VERSION >= 2
- if (reply.prim.info_ack.dl_sap_length < 0)
- adrlen += reply.prim.info_ack.dl_sap_length;
- else
- adrp += reply.prim.info_ack.dl_sap_length;
-#endif
-
- hwaddr->sa_family = AF_UNSPEC;
- memcpy(hwaddr->sa_data, adrp, adrlen);
-
- return 1;
-}
-/*
- * get_hw_addr - obtain the hardware address for a named interface.
- */
-static int
-get_hw_addr(name, ina, hwaddr)
- char *name;
- u_int32_t ina;
- struct sockaddr *hwaddr;
-{
- /* New way - get the address by doing an arp request. */
- int s;
- struct arpreq req;
-
- s = socket(AF_INET, SOCK_DGRAM, 0);
- if (s < 0)
- return 0;
- memset(&req, 0, sizeof(req));
- req.arp_pa.sa_family = AF_INET;
- INET_ADDR(req.arp_pa) = ina;
- if (ioctl(s, SIOCGARP, &req) < 0) {
- error("Couldn't get ARP entry for %s: %m", ip_ntoa(ina));
- return 0;
- }
- *hwaddr = req.arp_ha;
- hwaddr->sa_family = AF_UNSPEC;
-
- return 1;
-}
-
-static int
-dlpi_attach(fd, ppa)
- int fd, ppa;
-{
- dl_attach_req_t req;
- struct strbuf buf;
-
- req.dl_primitive = DL_ATTACH_REQ;
- req.dl_ppa = ppa;
- buf.len = sizeof(req);
- buf.buf = (void *) &req;
- return putmsg(fd, &buf, NULL, RS_HIPRI);
-}
-
-static int
-dlpi_info_req(fd)
- int fd;
-{
- dl_info_req_t req;
- struct strbuf buf;
-
- req.dl_primitive = DL_INFO_REQ;
- buf.len = sizeof(req);
- buf.buf = (void *) &req;
- return putmsg(fd, &buf, NULL, RS_HIPRI);
-}
-
-static int
-dlpi_get_reply(fd, reply, expected_prim, maxlen)
- union DL_primitives *reply;
- int fd, expected_prim, maxlen;
-{
- struct strbuf buf;
- int flags, n;
- struct pollfd pfd;
-
- /*
- * Use poll to wait for a message with a timeout.
- */
- pfd.fd = fd;
- pfd.events = POLLIN | POLLPRI;
- do {
- n = poll(&pfd, 1, 1000);
- } while (n == -1 && errno == EINTR);
- if (n <= 0)
- return -1;
-
- /*
- * Get the reply.
- */
- buf.maxlen = maxlen;
- buf.buf = (void *) reply;
- flags = 0;
- if (getmsg(fd, &buf, NULL, &flags) < 0)
- return -1;
-
- if (buf.len < sizeof(ulong)) {
- if (debug)
- dbglog("dlpi response short (len=%d)\n", buf.len);
- return -1;
- }
-
- if (reply->dl_primitive == expected_prim)
- return 0;
-
- if (debug) {
- if (reply->dl_primitive == DL_ERROR_ACK) {
- dbglog("dlpi error %d (unix errno %d) for prim %x\n",
- reply->error_ack.dl_errno, reply->error_ack.dl_unix_errno,
- reply->error_ack.dl_error_primitive);
- } else {
- dbglog("dlpi unexpected response prim %x\n",
- reply->dl_primitive);
- }
- }
-
- return -1;
-}
-
-/*
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'. If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-u_int32_t
-GetMask(addr)
- u_int32_t addr;
-{
- u_int32_t mask, nmask, ina;
- struct ifreq *ifr, *ifend, ifreq;
- int nif;
- struct ifconf ifc;
-
- addr = ntohl(addr);
- if (IN_CLASSA(addr)) /* determine network mask for address class */
- nmask = IN_CLASSA_NET;
- else if (IN_CLASSB(addr))
- nmask = IN_CLASSB_NET;
- else
- nmask = IN_CLASSC_NET;
- /* class D nets are disallowed by bad_ip_adrs */
- mask = netmask | htonl(nmask);
-
- /*
- * Scan through the system's network interfaces.
- */
-#ifdef SIOCGIFNUM
- if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0)
-#endif
- nif = MAX_IFS;
- ifc.ifc_len = nif * sizeof(struct ifreq);
- ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len);
- if (ifc.ifc_buf == 0)
- return mask;
- if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) {
- warn("Couldn't get system interface list: %m");
- free(ifc.ifc_buf);
- return mask;
- }
- ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
- for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) {
- /*
- * Check the interface's internet address.
- */
- if (ifr->ifr_addr.sa_family != AF_INET)
- continue;
- ina = INET_ADDR(ifr->ifr_addr);
- if ((ntohl(ina) & nmask) != (addr & nmask))
- continue;
- /*
- * Check that the interface is up, and not point-to-point or loopback.
- */
- strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
- if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0)
- continue;
- if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK))
- != IFF_UP)
- continue;
- /*
- * Get its netmask and OR it into our mask.
- */
- if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0)
- continue;
- mask |= INET_ADDR(ifreq.ifr_addr);
- }
-
- free(ifc.ifc_buf);
- return mask;
-}
-
-/*
- * logwtmp - write an accounting record to the /var/adm/wtmp file.
- */
-void
-logwtmp(line, name, host)
- const char *line, *name, *host;
-{
- static struct utmpx utmpx;
-
- if (name[0] != 0) {
- /* logging in */
- strncpy(utmpx.ut_user, name, sizeof(utmpx.ut_user));
- strncpy(utmpx.ut_id, ifname, sizeof(utmpx.ut_id));
- strncpy(utmpx.ut_line, line, sizeof(utmpx.ut_line));
- utmpx.ut_pid = getpid();
- utmpx.ut_type = USER_PROCESS;
- } else {
- utmpx.ut_type = DEAD_PROCESS;
- }
- gettimeofday(&utmpx.ut_tv, NULL);
- updwtmpx("/var/adm/wtmpx", &utmpx);
-}
-
-/*
- * get_host_seed - return the serial number of this machine.
- */
-int
-get_host_seed()
-{
- char buf[32];
-
- if (sysinfo(SI_HW_SERIAL, buf, sizeof(buf)) < 0) {
- error("sysinfo: %m");
- return 0;
- }
- return (int) strtoul(buf, NULL, 16);
-}
-
-static int
-strioctl(fd, cmd, ptr, ilen, olen)
- int fd, cmd, ilen, olen;
- void *ptr;
-{
- struct strioctl str;
-
- str.ic_cmd = cmd;
- str.ic_timout = 0;
- str.ic_len = ilen;
- str.ic_dp = ptr;
- if (ioctl(fd, I_STR, &str) == -1)
- return -1;
- if (str.ic_len != olen)
- dbglog("strioctl: expected %d bytes, got %d for cmd %x\n",
- olen, str.ic_len, cmd);
- return 0;
-}
-
-#if 0
-/*
- * lock - create a lock file for the named lock device
- */
-
-#define LOCK_PREFIX "/var/spool/locks/LK."
-static char lock_file[40]; /* name of lock file created */
-
-int
-lock(dev)
- char *dev;
-{
- int n, fd, pid;
- struct stat sbuf;
- char ascii_pid[12];
-
- if (stat(dev, &sbuf) < 0) {
- error("Can't get device number for %s: %m", dev);
- return -1;
- }
- if ((sbuf.st_mode & S_IFMT) != S_IFCHR) {
- error("Can't lock %s: not a character device", dev);
- return -1;
- }
- slprintf(lock_file, sizeof(lock_file), "%s%03d.%03d.%03d",
- LOCK_PREFIX, major(sbuf.st_dev),
- major(sbuf.st_rdev), minor(sbuf.st_rdev));
-
- while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
- if (errno == EEXIST
- && (fd = open(lock_file, O_RDONLY, 0)) >= 0) {
- /* Read the lock file to find out who has the device locked */
- n = read(fd, ascii_pid, 11);
- if (n <= 0) {
- error("Can't read pid from lock file %s", lock_file);
- close(fd);
- } else {
- ascii_pid[n] = 0;
- pid = atoi(ascii_pid);
- if (pid > 0 && kill(pid, 0) == -1 && errno == ESRCH) {
- /* pid no longer exists - remove the lock file */
- if (unlink(lock_file) == 0) {
- close(fd);
- notice("Removed stale lock on %s (pid %d)",
- dev, pid);
- continue;
- } else
- warn("Couldn't remove stale lock on %s",
- dev);
- } else
- notice("Device %s is locked by pid %d",
- dev, pid);
- }
- close(fd);
- } else
- error("Can't create lock file %s: %m", lock_file);
- lock_file[0] = 0;
- return -1;
- }
-
- slprintf(ascii_pid, sizeof(ascii_pid), "%10d\n", getpid());
- write(fd, ascii_pid, 11);
-
- close(fd);
- return 1;
-}
-
-/*
- * unlock - remove our lockfile
- */
-void
-unlock()
-{
- if (lock_file[0]) {
- unlink(lock_file);
- lock_file[0] = 0;
- }
-}
-#endif
-
-/*
- * cifroute - delete a route through the addresses given.
- */
-int
-cifroute(u, our, his)
- int u;
- u_int32_t our, his;
-{
- struct rtentry rt;
-
- memset(&rt, 0, sizeof(rt));
- rt.rt_dst.sa_family = AF_INET;
- INET_ADDR(rt.rt_dst) = his;
- rt.rt_gateway.sa_family = AF_INET;
- INET_ADDR(rt.rt_gateway) = our;
- rt.rt_flags = RTF_HOST;
-
- if (ioctl(ipfd, SIOCDELRT, &rt) < 0) {
- error("Can't delete route: %m");
- return 0;
- }
-
- return 1;
-}
-
-/*
- * have_route_to - determine if the system has a route to the specified
- * IP address. Returns 0 if not, 1 if so, -1 if we can't tell.
- * `addr' is in network byte order.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-#ifndef T_CURRENT /* needed for Solaris 2.5 */
-#define T_CURRENT MI_T_CURRENT
-#endif
-
-int
-have_route_to(addr)
- u_int32_t addr;
-{
-#ifdef SOL2
- int fd, r, flags, i;
- struct {
- struct T_optmgmt_req req;
- struct opthdr hdr;
- } req;
- union {
- struct T_optmgmt_ack ack;
- unsigned char space[64];
- } ack;
- struct opthdr *rh;
- struct strbuf cbuf, dbuf;
- int nroutes;
- mib2_ipRouteEntry_t routes[8];
- mib2_ipRouteEntry_t *rp;
-
- fd = open(mux_dev_name, O_RDWR);
- if (fd < 0) {
- warn("have_route_to: couldn't open %s: %m", mux_dev_name);
- return -1;
- }
-
- req.req.PRIM_type = T_OPTMGMT_REQ;
- req.req.OPT_offset = (char *) &req.hdr - (char *) &req;
- req.req.OPT_length = sizeof(req.hdr);
- req.req.MGMT_flags = T_CURRENT;
-
- req.hdr.level = MIB2_IP;
- req.hdr.name = 0;
- req.hdr.len = 0;
-
- cbuf.buf = (char *) &req;
- cbuf.len = sizeof(req);
-
- if (putmsg(fd, &cbuf, NULL, 0) == -1) {
- warn("have_route_to: putmsg: %m");
- close(fd);
- return -1;
- }
-
- for (;;) {
- cbuf.buf = (char *) &ack;
- cbuf.maxlen = sizeof(ack);
- dbuf.buf = (char *) routes;
- dbuf.maxlen = sizeof(routes);
- flags = 0;
- r = getmsg(fd, &cbuf, &dbuf, &flags);
- if (r == -1) {
- warn("have_route_to: getmsg: %m");
- close(fd);
- return -1;
- }
-
- if (cbuf.len < sizeof(struct T_optmgmt_ack)
- || ack.ack.PRIM_type != T_OPTMGMT_ACK
- || ack.ack.MGMT_flags != T_SUCCESS
- || ack.ack.OPT_length < sizeof(struct opthdr)) {
- dbglog("have_route_to: bad message len=%d prim=%d",
- cbuf.len, ack.ack.PRIM_type);
- close(fd);
- return -1;
- }
-
- rh = (struct opthdr *) ((char *)&ack + ack.ack.OPT_offset);
- if (rh->level == 0 && rh->name == 0)
- break;
- if (rh->level != MIB2_IP || rh->name != MIB2_IP_21) {
- while (r == MOREDATA)
- r = getmsg(fd, NULL, &dbuf, &flags);
- continue;
- }
-
- for (;;) {
- nroutes = dbuf.len / sizeof(mib2_ipRouteEntry_t);
- for (rp = routes, i = 0; i < nroutes; ++i, ++rp) {
- if (rp->ipRouteMask != ~0) {
- dbglog("have_route_to: dest=%x gw=%x mask=%x\n",
- rp->ipRouteDest, rp->ipRouteNextHop,
- rp->ipRouteMask);
- if (((addr ^ rp->ipRouteDest) & rp->ipRouteMask) == 0
- && rp->ipRouteNextHop != remote_addr)
- return 1;
- }
- }
- if (r == 0)
- break;
- r = getmsg(fd, NULL, &dbuf, &flags);
- }
- }
- close(fd);
- return 0;
-#else
- return -1;
-#endif /* SOL2 */
-}
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side to
- * the uid given. Assumes slave_name points to MAXPATHLEN bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
- int *master_fdp;
- int *slave_fdp;
- char *slave_name;
- int uid;
-{
- int mfd, sfd;
- char *pty_name;
- struct termios tios;
-
- mfd = open("/dev/ptmx", O_RDWR);
- if (mfd < 0) {
- error("Couldn't open pty master: %m");
- return 0;
- }
-
- pty_name = ptsname(mfd);
- if (pty_name == NULL) {
- error("Couldn't get name of pty slave");
- close(mfd);
- return 0;
- }
- if (chown(pty_name, uid, -1) < 0)
- warn("Couldn't change owner of pty slave: %m");
- if (chmod(pty_name, S_IRUSR | S_IWUSR) < 0)
- warn("Couldn't change permissions on pty slave: %m");
- if (unlockpt(mfd) < 0)
- warn("Couldn't unlock pty slave: %m");
-
- sfd = open(pty_name, O_RDWR);
- if (sfd < 0) {
- error("Couldn't open pty slave %s: %m", pty_name);
- close(mfd);
- return 0;
- }
- if (ioctl(sfd, I_PUSH, "ptem") < 0)
- warn("Couldn't push ptem module on pty slave: %m");
-
- dbglog("Using %s", pty_name);
- strlcpy(slave_name, pty_name, MAXPATHLEN);
- *master_fdp = mfd;
- *slave_fdp = sfd;
-
- return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/sys-sunos4.c b/mdk-stage1/ppp/pppd/sys-sunos4.c
deleted file mode 100644
index 3344948e9..000000000
--- a/mdk-stage1/ppp/pppd/sys-sunos4.c
+++ /dev/null
@@ -1,1559 +0,0 @@
-/*
- * System-dependent procedures for pppd under SunOS 4.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#define RCSID "$Id$"
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <termios.h>
-#include <signal.h>
-#include <malloc.h>
-#include <utmp.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/stat.h>
-#include <sys/time.h>
-#include <sys/poll.h>
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/nit_if.h>
-#include <net/route.h>
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include <netinet/in.h>
-
-#include "pppd.h"
-
-#if defined(sun) && defined(sparc)
-#include <alloca.h>
-#ifndef __GNUC__
-extern void *alloca();
-#endif
-#endif /*sparc*/
-
-static const char rcsid[] = RCSID;
-
-static int pppfd;
-static int fdmuxid = -1;
-static int iffd;
-static int sockfd;
-
-static int restore_term;
-static struct termios inittermios;
-static struct winsize wsinfo; /* Initial window size info */
-static pid_t parent_pid; /* PID of our parent */
-
-extern u_char inpacket_buf[]; /* borrowed from main.c */
-
-#define MAX_POLLFDS 32
-static struct pollfd pollfds[MAX_POLLFDS];
-static int n_pollfds;
-
-static int link_mtu, link_mru;
-
-#define NMODULES 32
-static int tty_nmodules;
-static char tty_modules[NMODULES][FMNAMESZ+1];
-
-static int if_is_up; /* Interface has been marked up */
-static u_int32_t ifaddrs[2]; /* local and remote addresses */
-static u_int32_t default_route_gateway; /* Gateway for default route added */
-static u_int32_t proxy_arp_addr; /* Addr for proxy arp entry added */
-
-/* Prototypes for procedures local to this file. */
-static int translate_speed __P((int));
-static int baud_rate_of __P((int));
-static int get_ether_addr __P((u_int32_t, struct sockaddr *));
-static int strioctl __P((int, int, void *, int, int));
-
-
-/*
- * sys_init - System-dependent initialization.
- */
-void
-sys_init()
-{
- int x;
-
- /* Get an internet socket for doing socket ioctl's on. */
- if ((sockfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
- fatal("Couldn't create IP socket: %m");
-
- /*
- * We may want to send a SIGHUP to the session leader associated
- * with our controlling terminal later. Because SunOS doesn't
- * have getsid(), we make do with sending the signal to our
- * parent process.
- */
- parent_pid = getppid();
-
- /*
- * Open the ppp device.
- */
- pppfd = open("/dev/ppp", O_RDWR | O_NONBLOCK, 0);
- if (pppfd < 0)
- fatal("Can't open /dev/ppp: %m");
- if (kdebugflag) {
- x = PPPDBG_LOG + PPPDBG_DRIVER;
- strioctl(pppfd, PPPIO_DEBUG, &x, sizeof(int), 0);
- }
-
- /* Assign a new PPA and get its unit number. */
- if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0)
- fatal("Can't create new PPP interface: %m");
-
- /*
- * Open the ppp device again and push the if_ppp module on it.
- */
- iffd = open("/dev/ppp", O_RDWR, 0);
- if (iffd < 0)
- fatal("Can't open /dev/ppp (2): %m");
- if (kdebugflag) {
- x = PPPDBG_LOG + PPPDBG_DRIVER;
- strioctl(iffd, PPPIO_DEBUG, &x, sizeof(int), 0);
- }
- if (strioctl(iffd, PPPIO_ATTACH, &ifunit, sizeof(int), 0) < 0)
- fatal("Couldn't attach ppp interface to device: %m");
- if (ioctl(iffd, I_PUSH, "if_ppp") < 0)
- fatal("Can't push ppp interface module: %m");
- if (kdebugflag) {
- x = PPPDBG_LOG + PPPDBG_IF;
- strioctl(iffd, PPPIO_DEBUG, &x, sizeof(int), 0);
- }
- if (strioctl(iffd, PPPIO_NEWPPA, &ifunit, sizeof(int), 0) < 0)
- fatal("Couldn't create ppp interface unit: %m");
- x = PPP_IP;
- if (strioctl(iffd, PPPIO_BIND, &x, sizeof(int), 0) < 0)
- fatal("Couldn't bind ppp interface to IP SAP: %m");
-
- n_pollfds = 0;
-}
-
-/*
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This shouldn't call die() because it's called from die().
- */
-void
-sys_cleanup()
-{
- if (if_is_up)
- sifdown(0);
- if (ifaddrs[0])
- cifaddr(0, ifaddrs[0], ifaddrs[1]);
- if (default_route_gateway)
- cifdefaultroute(0, 0, default_route_gateway);
- if (proxy_arp_addr)
- cifproxyarp(0, proxy_arp_addr);
-}
-
-/*
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close()
-{
- close(iffd);
- close(pppfd);
- close(sockfd);
-}
-
-/*
- * sys_check_options - check the options that the user specified
- */
-int
-sys_check_options()
-{
- return 1;
-}
-
-#if 0
-/*
- * daemon - Detach us from controlling terminal session.
- */
-int
-daemon(nochdir, noclose)
- int nochdir, noclose;
-{
- int pid;
-
- if ((pid = fork()) < 0)
- return -1;
- if (pid != 0)
- exit(0); /* parent dies */
- setsid();
- if (!nochdir)
- chdir("/");
- if (!noclose) {
- fclose(stdin); /* don't need stdin, stdout, stderr */
- fclose(stdout);
- fclose(stderr);
- }
- return 0;
-}
-#endif
-
-/*
- * ppp_available - check whether the system has any ppp interfaces
- */
-int
-ppp_available()
-{
- struct stat buf;
-
- return stat("/dev/ppp", &buf) >= 0;
-}
-
-/*
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-int
-tty_establish_ppp(fd)
- int fd;
-{
- int i;
-
- /* Pop any existing modules off the tty stream. */
- for (i = 0;; ++i)
- if (ioctl(fd, I_LOOK, tty_modules[i]) < 0
- || ioctl(fd, I_POP, 0) < 0)
- break;
- tty_nmodules = i;
-
- /* Push the async hdlc module and the compressor module. */
- if (ioctl(fd, I_PUSH, "ppp_ahdl") < 0)
- fatal("Couldn't push PPP Async HDLC module: %m");
- if (ioctl(fd, I_PUSH, "ppp_comp") < 0)
- error("Couldn't push PPP compression module: %m");
-
- /* Link the serial port under the PPP multiplexor. */
- if ((fdmuxid = ioctl(pppfd, I_LINK, fd)) < 0)
- fatal("Can't link tty to PPP mux: %m");
-
- return pppfd;
-}
-
-/*
- * disestablish_ppp - Restore the serial port to normal operation.
- * It attempts to reconstruct the stream with the previously popped
- * modules. This shouldn't call die() because it's called from die().
- */
-void
-tty_disestablish_ppp(fd)
- int fd;
-{
- int i;
-
- if (fdmuxid >= 0) {
- if (ioctl(pppfd, I_UNLINK, fdmuxid) < 0) {
- if (!hungup)
- error("Can't unlink tty from PPP mux: %m");
- }
- fdmuxid = -1;
-
- if (!hungup) {
- while (ioctl(fd, I_POP, 0) >= 0)
- ;
- for (i = tty_nmodules - 1; i >= 0; --i)
- if (ioctl(fd, I_PUSH, tty_modules[i]) < 0)
- error("Couldn't restore tty module %s: %m",
- tty_modules[i]);
- }
- if (hungup && default_device && parent_pid > 0) {
- /*
- * If we have received a hangup, we need to send a SIGHUP
- * to the terminal's controlling process. The reason is
- * that the original stream head for the terminal hasn't
- * seen the M_HANGUP message (it went up through the ppp
- * driver to the stream head for our fd to /dev/ppp).
- * Actually we send the signal to the process that invoked
- * pppd, since SunOS doesn't have getsid().
- */
- kill(parent_pid, SIGHUP);
- }
- }
-}
-
-/*
- * Check whether the link seems not to be 8-bit clean.
- */
-void
-clean_check()
-{
- int x;
- char *s;
-
- if (strioctl(pppfd, PPPIO_GCLEAN, &x, 0, sizeof(x)) < 0)
- return;
- s = NULL;
- switch (~x) {
- case RCV_B7_0:
- s = "bit 7 set to 1";
- break;
- case RCV_B7_1:
- s = "bit 7 set to 0";
- break;
- case RCV_EVNP:
- s = "odd parity";
- break;
- case RCV_ODDP:
- s = "even parity";
- break;
- }
- if (s != NULL) {
- warn("Serial link is not 8-bit clean:");
- warn("All received characters had %s", s);
- }
-}
-
-/*
- * List of valid speeds.
- */
-struct speed {
- int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
- { 50, B50 },
-#endif
-#ifdef B75
- { 75, B75 },
-#endif
-#ifdef B110
- { 110, B110 },
-#endif
-#ifdef B134
- { 134, B134 },
-#endif
-#ifdef B150
- { 150, B150 },
-#endif
-#ifdef B200
- { 200, B200 },
-#endif
-#ifdef B300
- { 300, B300 },
-#endif
-#ifdef B600
- { 600, B600 },
-#endif
-#ifdef B1200
- { 1200, B1200 },
-#endif
-#ifdef B1800
- { 1800, B1800 },
-#endif
-#ifdef B2000
- { 2000, B2000 },
-#endif
-#ifdef B2400
- { 2400, B2400 },
-#endif
-#ifdef B3600
- { 3600, B3600 },
-#endif
-#ifdef B4800
- { 4800, B4800 },
-#endif
-#ifdef B7200
- { 7200, B7200 },
-#endif
-#ifdef B9600
- { 9600, B9600 },
-#endif
-#ifdef B19200
- { 19200, B19200 },
-#endif
-#ifdef B38400
- { 38400, B38400 },
-#endif
-#ifdef EXTA
- { 19200, EXTA },
-#endif
-#ifdef EXTB
- { 38400, EXTB },
-#endif
-#ifdef B57600
- { 57600, B57600 },
-#endif
-#ifdef B115200
- { 115200, B115200 },
-#endif
- { 0, 0 }
-};
-
-/*
- * Translate from bits/second to a speed_t.
- */
-static int
-translate_speed(bps)
- int bps;
-{
- struct speed *speedp;
-
- if (bps == 0)
- return 0;
- for (speedp = speeds; speedp->speed_int; speedp++)
- if (bps == speedp->speed_int)
- return speedp->speed_val;
- warn("speed %d not supported", bps);
- return 0;
-}
-
-/*
- * Translate from a speed_t to bits/second.
- */
-static int
-baud_rate_of(speed)
- int speed;
-{
- struct speed *speedp;
-
- if (speed == 0)
- return 0;
- for (speedp = speeds; speedp->speed_int; speedp++)
- if (speed == speedp->speed_val)
- return speedp->speed_int;
- return 0;
-}
-
-/*
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc. If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-void
-set_up_tty(fd, local)
- int fd, local;
-{
- int speed;
- struct termios tios;
-
- if (tcgetattr(fd, &tios) < 0)
- fatal("tcgetattr: %m");
-
- if (!restore_term) {
- inittermios = tios;
- ioctl(fd, TIOCGWINSZ, &wsinfo);
- }
-
- tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
- if (crtscts > 0)
- tios.c_cflag |= CRTSCTS;
- else if (crtscts < 0)
- tios.c_cflag &= ~CRTSCTS;
-
- tios.c_cflag |= CS8 | CREAD | HUPCL;
- if (local || !modem)
- tios.c_cflag |= CLOCAL;
- tios.c_iflag = IGNBRK | IGNPAR;
- tios.c_oflag = 0;
- tios.c_lflag = 0;
- tios.c_cc[VMIN] = 1;
- tios.c_cc[VTIME] = 0;
-
- if (crtscts == -2) {
- tios.c_iflag |= IXON | IXOFF;
- tios.c_cc[VSTOP] = 0x13; /* DC3 = XOFF = ^S */
- tios.c_cc[VSTART] = 0x11; /* DC1 = XON = ^Q */
- }
-
- speed = translate_speed(inspeed);
- if (speed) {
- cfsetospeed(&tios, speed);
- cfsetispeed(&tios, speed);
- } else {
- speed = cfgetospeed(&tios);
- /*
- * We can't proceed if the serial port speed is 0,
- * since that implies that the serial port is disabled.
- */
- if (speed == B0)
- fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
- }
-
- if (tcsetattr(fd, TCSAFLUSH, &tios) < 0)
- fatal("tcsetattr: %m");
-
- baud_rate = inspeed = baud_rate_of(speed);
- restore_term = 1;
-}
-
-/*
- * restore_tty - restore the terminal to the saved settings.
- */
-void
-restore_tty(fd)
- int fd;
-{
- if (restore_term) {
- if (!default_device) {
- /*
- * Turn off echoing, because otherwise we can get into
- * a loop with the tty and the modem echoing to each other.
- * We presume we are the sole user of this tty device, so
- * when we close it, it will revert to its defaults anyway.
- */
- inittermios.c_lflag &= ~(ECHO | ECHONL);
- }
- if (tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
- if (!hungup && errno != ENXIO)
- warn("tcsetattr: %m");
- ioctl(fd, TIOCSWINSZ, &wsinfo);
- restore_term = 0;
- }
-}
-
-/*
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-void
-setdtr(fd, on)
-int fd, on;
-{
- int modembits = TIOCM_DTR;
-
- ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits);
-}
-
-/*
- * open_loopback - open the device we use for getting packets
- * in demand mode. Under SunOS, we use our existing fd
- * to the ppp driver.
- */
-int
-open_ppp_loopback()
-{
- return pppfd;
-}
-
-/*
- * output - Output PPP packet.
- */
-void
-output(unit, p, len)
- int unit;
- u_char *p;
- int len;
-{
- struct strbuf data;
- int retries;
- struct pollfd pfd;
-
- if (debug)
- dbglog("sent %P", p, len);
-
- data.len = len;
- data.buf = (caddr_t) p;
- retries = 4;
- while (putmsg(pppfd, NULL, &data, 0) < 0) {
- if (--retries < 0 || (errno != EWOULDBLOCK && errno != EAGAIN)) {
- if (errno != ENXIO)
- error("Couldn't send packet: %m");
- break;
- }
- pfd.fd = pppfd;
- pfd.events = POLLOUT;
- poll(&pfd, 1, 250); /* wait for up to 0.25 seconds */
- }
-}
-
-
-/*
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_input(timo)
- struct timeval *timo;
-{
- int t;
-
- t = timo == NULL? -1: timo->tv_sec * 1000 + timo->tv_usec / 1000;
- if (poll(pollfds, n_pollfds, t) < 0 && errno != EINTR) {
- if (errno != EAGAIN)
- fatal("poll: %m");
- /* we can get EAGAIN on a heavily loaded system,
- * just wait a short time and try again. */
- usleep(50000);
- }
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(fd)
- int fd;
-{
- int n;
-
- for (n = 0; n < n_pollfds; ++n)
- if (pollfds[n].fd == fd)
- return;
- if (n_pollfds < MAX_POLLFDS) {
- pollfds[n_pollfds].fd = fd;
- pollfds[n_pollfds].events = POLLIN | POLLPRI | POLLHUP;
- ++n_pollfds;
- } else
- error("Too many inputs!");
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(fd)
- int fd;
-{
- int n;
-
- for (n = 0; n < n_pollfds; ++n) {
- if (pollfds[n].fd == fd) {
- while (++n < n_pollfds)
- pollfds[n-1] = pollfds[n];
- --n_pollfds;
- break;
- }
- }
-}
-
-#if 0
-/*
- * wait_loop_output - wait until there is data available on the
- * loopback, for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_loop_output(timo)
- struct timeval *timo;
-{
- wait_input(timo);
-}
-
-/*
- * wait_time - wait for a given length of time or until a
- * signal is received.
- */
-void
-wait_time(timo)
- struct timeval *timo;
-{
- int n;
-
- n = select(0, NULL, NULL, NULL, timo);
- if (n < 0 && errno != EINTR)
- fatal("select: %m");
-}
-#endif
-
-/*
- * read_packet - get a PPP packet from the serial device.
- */
-int
-read_packet(buf)
- u_char *buf;
-{
- struct strbuf ctrl, data;
- int flags, len;
- unsigned char ctrlbuf[64];
-
- for (;;) {
- data.maxlen = PPP_MRU + PPP_HDRLEN;
- data.buf = (caddr_t) buf;
- ctrl.maxlen = sizeof(ctrlbuf);
- ctrl.buf = (caddr_t) ctrlbuf;
- flags = 0;
- len = getmsg(pppfd, &ctrl, &data, &flags);
- if (len < 0) {
- if (errno == EAGAIN || errno == EINTR)
- return -1;
- fatal("Error reading packet: %m");
- }
-
- if (ctrl.len <= 0)
- return data.len;
-
- /*
- * Got a M_PROTO or M_PCPROTO message. Huh?
- */
- if (debug)
- dbglog("got ctrl msg len=%d", ctrl.len);
-
- }
-}
-
-/*
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output()
-{
- int len;
- int rv = 0;
-
- while ((len = read_packet(inpacket_buf)) > 0) {
- if (loop_frame(inpacket_buf, len))
- rv = 1;
- }
- return rv;
-}
-
-/*
- * ppp_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-void
-ppp_send_config(unit, mtu, asyncmap, pcomp, accomp)
- int unit, mtu;
- u_int32_t asyncmap;
- int pcomp, accomp;
-{
- int cf[2];
- struct ifreq ifr;
-
- link_mtu = mtu;
- if (strioctl(pppfd, PPPIO_MTU, &mtu, sizeof(mtu), 0) < 0) {
- if (hungup && errno == ENXIO)
- return;
- error("Couldn't set MTU: %m");
- }
- if (strioctl(pppfd, PPPIO_XACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
- error("Couldn't set transmit ACCM: %m");
- }
- cf[0] = (pcomp? COMP_PROT: 0) + (accomp? COMP_AC: 0);
- cf[1] = COMP_PROT | COMP_AC;
- if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- error("Couldn't set prot/AC compression: %m");
- }
-
- /* set mtu for ip as well */
- memset(&ifr, 0, sizeof(ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- ifr.ifr_metric = link_mtu;
- if (ioctl(sockfd, SIOCSIFMTU, &ifr) < 0) {
- error("Couldn't set IP MTU: %m");
- }
-}
-
-/*
- * ppp_set_xaccm - set the extended transmit ACCM for the interface.
- */
-void
-ppp_set_xaccm(unit, accm)
- int unit;
- ext_accm accm;
-{
- if (strioctl(pppfd, PPPIO_XACCM, accm, sizeof(ext_accm), 0) < 0) {
- if (!hungup || errno != ENXIO)
- warn("Couldn't set extended ACCM: %m");
- }
-}
-
-/*
- * ppp_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-void
-ppp_recv_config(unit, mru, asyncmap, pcomp, accomp)
- int unit, mru;
- u_int32_t asyncmap;
- int pcomp, accomp;
-{
- int cf[2];
-
- link_mru = mru;
- if (strioctl(pppfd, PPPIO_MRU, &mru, sizeof(mru), 0) < 0) {
- if (hungup && errno == ENXIO)
- return;
- error("Couldn't set MRU: %m");
- }
- if (strioctl(pppfd, PPPIO_RACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
- error("Couldn't set receive ACCM: %m");
- }
- cf[0] = (pcomp? DECOMP_PROT: 0) + (accomp? DECOMP_AC: 0);
- cf[1] = DECOMP_PROT | DECOMP_AC;
- if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- error("Couldn't set prot/AC decompression: %m");
- }
-}
-
-/*
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-int
-ccp_test(unit, opt_ptr, opt_len, for_transmit)
- int unit, opt_len, for_transmit;
- u_char *opt_ptr;
-{
- if (strioctl(pppfd, (for_transmit? PPPIO_XCOMP: PPPIO_RCOMP),
- opt_ptr, opt_len, 0) >= 0)
- return 1;
- return (errno == ENOSR)? 0: -1;
-}
-
-/*
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-void
-ccp_flags_set(unit, isopen, isup)
- int unit, isopen, isup;
-{
- int cf[2];
-
- cf[0] = (isopen? CCP_ISOPEN: 0) + (isup? CCP_ISUP: 0);
- cf[1] = CCP_ISOPEN | CCP_ISUP | CCP_ERROR | CCP_FATALERROR;
- if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- if (!hungup || errno != ENXIO)
- error("Couldn't set kernel CCP state: %m");
- }
-}
-
-/*
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
- int u;
- struct ppp_idle *ip;
-{
- return strioctl(pppfd, PPPIO_GIDLE, ip, 0, sizeof(struct ppp_idle)) >= 0;
-}
-
-/*
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
- int u;
- struct pppd_stats *stats;
-{
- struct ppp_stats s;
-
- if (strioctl(pppfd, PPPIO_GETSTAT, &s, 0, sizeof(s)) < 0) {
- error("Couldn't get link statistics: %m");
- return 0;
- }
- stats->bytes_in = s.p.ppp_ibytes;
- stats->bytes_out = s.p.ppp_obytes;
- return 1;
-}
-
-
-/*
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise. This is necessary because of patent nonsense.
- */
-int
-ccp_fatal_error(unit)
- int unit;
-{
- int cf[2];
-
- cf[0] = cf[1] = 0;
- if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- if (errno != ENXIO && errno != EINVAL)
- error("Couldn't get compression flags: %m");
- return 0;
- }
- return cf[0] & CCP_FATALERROR;
-}
-
-/*
- * sifvjcomp - config tcp header compression
- */
-int
-sifvjcomp(u, vjcomp, xcidcomp, xmaxcid)
- int u, vjcomp, xcidcomp, xmaxcid;
-{
- int cf[2];
- char maxcid[2];
-
- if (vjcomp) {
- maxcid[0] = xcidcomp;
- maxcid[1] = 15; /* XXX should be rmaxcid */
- if (strioctl(pppfd, PPPIO_VJINIT, maxcid, sizeof(maxcid), 0) < 0) {
- error("Couldn't initialize VJ compression: %m");
- }
- }
-
- cf[0] = (vjcomp? COMP_VJC + DECOMP_VJC: 0) /* XXX this is wrong */
- + (xcidcomp? COMP_VJCCID + DECOMP_VJCCID: 0);
- cf[1] = COMP_VJC + DECOMP_VJC + COMP_VJCCID + DECOMP_VJCCID;
- if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
- if (vjcomp)
- error("Couldn't enable VJ compression: %m");
- }
-
- return 1;
-}
-
-/*
- * sifup - Config the interface up and enable IP packets to pass.
- */
-int
-sifup(u)
- int u;
-{
- struct ifreq ifr;
-
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(sockfd, SIOCGIFFLAGS, &ifr) < 0) {
- error("Couldn't mark interface up (get): %m");
- return 0;
- }
- ifr.ifr_flags |= IFF_UP;
- if (ioctl(sockfd, SIOCSIFFLAGS, &ifr) < 0) {
- error("Couldn't mark interface up (set): %m");
- return 0;
- }
- if_is_up = 1;
- return 1;
-}
-
-/*
- * sifdown - Config the interface down and disable IP.
- */
-int
-sifdown(u)
- int u;
-{
- struct ifreq ifr;
-
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(sockfd, SIOCGIFFLAGS, &ifr) < 0) {
- error("Couldn't mark interface down (get): %m");
- return 0;
- }
- if ((ifr.ifr_flags & IFF_UP) != 0) {
- ifr.ifr_flags &= ~IFF_UP;
- if (ioctl(sockfd, SIOCSIFFLAGS, &ifr) < 0) {
- error("Couldn't mark interface down (set): %m");
- return 0;
- }
- }
- if_is_up = 0;
- return 1;
-}
-
-/*
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-int
-sifnpmode(u, proto, mode)
- int u;
- int proto;
- enum NPmode mode;
-{
- int npi[2];
-
- npi[0] = proto;
- npi[1] = (int) mode;
- if (strioctl(pppfd, PPPIO_NPMODE, npi, 2 * sizeof(int), 0) < 0) {
- error("ioctl(set NP %d mode to %d): %m", proto, mode);
- return 0;
- }
- return 1;
-}
-
-#define INET_ADDR(x) (((struct sockaddr_in *) &(x))->sin_addr.s_addr)
-
-/*
- * sifaddr - Config the interface IP addresses and netmask.
- */
-int
-sifaddr(u, o, h, m)
- int u;
- u_int32_t o, h, m;
-{
- struct ifreq ifr;
-
- memset(&ifr, 0, sizeof(ifr));
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- ifr.ifr_addr.sa_family = AF_INET;
- INET_ADDR(ifr.ifr_addr) = m;
- if (ioctl(sockfd, SIOCSIFNETMASK, &ifr) < 0) {
- error("Couldn't set IP netmask: %m");
- }
- ifr.ifr_addr.sa_family = AF_INET;
- INET_ADDR(ifr.ifr_addr) = o;
- if (ioctl(sockfd, SIOCSIFADDR, &ifr) < 0) {
- error("Couldn't set local IP address: %m");
- }
- ifr.ifr_dstaddr.sa_family = AF_INET;
- INET_ADDR(ifr.ifr_dstaddr) = h;
- if (ioctl(sockfd, SIOCSIFDSTADDR, &ifr) < 0) {
- error("Couldn't set remote IP address: %m");
- }
-#if 0 /* now done in ppp_send_config */
- ifr.ifr_metric = link_mtu;
- if (ioctl(sockfd, SIOCSIFMTU, &ifr) < 0) {
- error("Couldn't set IP MTU: %m");
- }
-#endif
- ifaddrs[0] = o;
- ifaddrs[1] = h;
-
- return 1;
-}
-
-/*
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-int
-cifaddr(u, o, h)
- int u;
- u_int32_t o, h;
-{
- struct rtentry rt;
-
- bzero(&rt, sizeof(rt));
- rt.rt_dst.sa_family = AF_INET;
- INET_ADDR(rt.rt_dst) = h;
- rt.rt_gateway.sa_family = AF_INET;
- INET_ADDR(rt.rt_gateway) = o;
- rt.rt_flags = RTF_HOST;
- if (ioctl(sockfd, SIOCDELRT, &rt) < 0)
- error("Couldn't delete route through interface: %m");
- ifaddrs[0] = 0;
- return 1;
-}
-
-/*
- * sifdefaultroute - assign a default route through the address given.
- */
-int
-sifdefaultroute(u, l, g)
- int u;
- u_int32_t l, g;
-{
- struct rtentry rt;
-
- bzero(&rt, sizeof(rt));
- rt.rt_dst.sa_family = AF_INET;
- INET_ADDR(rt.rt_dst) = 0;
- rt.rt_gateway.sa_family = AF_INET;
- INET_ADDR(rt.rt_gateway) = g;
- rt.rt_flags = RTF_GATEWAY;
-
- if (ioctl(sockfd, SIOCADDRT, &rt) < 0) {
- error("Can't add default route: %m");
- return 0;
- }
-
- default_route_gateway = g;
- return 1;
-}
-
-/*
- * cifdefaultroute - delete a default route through the address given.
- */
-int
-cifdefaultroute(u, l, g)
- int u;
- u_int32_t l, g;
-{
- struct rtentry rt;
-
- bzero(&rt, sizeof(rt));
- rt.rt_dst.sa_family = AF_INET;
- INET_ADDR(rt.rt_dst) = 0;
- rt.rt_gateway.sa_family = AF_INET;
- INET_ADDR(rt.rt_gateway) = g;
- rt.rt_flags = RTF_GATEWAY;
-
- if (ioctl(sockfd, SIOCDELRT, &rt) < 0) {
- error("Can't delete default route: %m");
- return 0;
- }
-
- default_route_gateway = 0;
- return 1;
-}
-
-/*
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-int
-sifproxyarp(unit, hisaddr)
- int unit;
- u_int32_t hisaddr;
-{
- struct arpreq arpreq;
-
- bzero(&arpreq, sizeof(arpreq));
- if (!get_ether_addr(hisaddr, &arpreq.arp_ha))
- return 0;
-
- arpreq.arp_pa.sa_family = AF_INET;
- INET_ADDR(arpreq.arp_pa) = hisaddr;
- arpreq.arp_flags = ATF_PERM | ATF_PUBL;
- if (ioctl(sockfd, SIOCSARP, (caddr_t) &arpreq) < 0) {
- error("Couldn't set proxy ARP entry: %m");
- return 0;
- }
-
- proxy_arp_addr = hisaddr;
- return 1;
-}
-
-/*
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-int
-cifproxyarp(unit, hisaddr)
- int unit;
- u_int32_t hisaddr;
-{
- struct arpreq arpreq;
-
- bzero(&arpreq, sizeof(arpreq));
- arpreq.arp_pa.sa_family = AF_INET;
- INET_ADDR(arpreq.arp_pa) = hisaddr;
- if (ioctl(sockfd, SIOCDARP, (caddr_t)&arpreq) < 0) {
- error("Couldn't delete proxy ARP entry: %m");
- return 0;
- }
-
- proxy_arp_addr = 0;
- return 1;
-}
-
-/*
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-#define MAX_IFS 32
-
-static int
-get_ether_addr(ipaddr, hwaddr)
- u_int32_t ipaddr;
- struct sockaddr *hwaddr;
-{
- struct ifreq *ifr, *ifend;
- u_int32_t ina, mask;
- struct ifreq ifreq;
- struct ifconf ifc;
- struct ifreq ifs[MAX_IFS];
- int nit_fd;
-
- ifc.ifc_len = sizeof(ifs);
- ifc.ifc_req = ifs;
- if (ioctl(sockfd, SIOCGIFCONF, &ifc) < 0) {
- error("ioctl(SIOCGIFCONF): %m");
- return 0;
- }
-
- /*
- * Scan through looking for an interface with an Internet
- * address on the same subnet as `ipaddr'.
- */
- ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
- for (ifr = ifc.ifc_req; ifr < ifend; ifr = (struct ifreq *)
- ((char *)&ifr->ifr_addr + sizeof(struct sockaddr))) {
- if (ifr->ifr_addr.sa_family == AF_INET) {
-
- /*
- * Check that the interface is up, and not point-to-point
- * or loopback.
- */
- strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
- if (ioctl(sockfd, SIOCGIFFLAGS, &ifreq) < 0)
- continue;
- if ((ifreq.ifr_flags &
- (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
- != (IFF_UP|IFF_BROADCAST))
- continue;
-
- /*
- * Get its netmask and check that it's on the right subnet.
- */
- if (ioctl(sockfd, SIOCGIFNETMASK, &ifreq) < 0)
- continue;
- ina = ((struct sockaddr_in *) &ifr->ifr_addr)->sin_addr.s_addr;
- mask = ((struct sockaddr_in *) &ifreq.ifr_addr)->sin_addr.s_addr;
- if ((ipaddr & mask) != (ina & mask))
- continue;
-
- break;
- }
- }
-
- if (ifr >= ifend)
- return 0;
- info("found interface %s for proxy arp", ifr->ifr_name);
-
- /*
- * Grab the physical address for this interface.
- */
- if ((nit_fd = open("/dev/nit", O_RDONLY)) < 0) {
- error("Couldn't open /dev/nit: %m");
- return 0;
- }
- strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
- if (ioctl(nit_fd, NIOCBIND, &ifreq) < 0
- || ioctl(nit_fd, SIOCGIFADDR, &ifreq) < 0) {
- error("Couldn't get hardware address for %s: %m",
- ifreq.ifr_name);
- close(nit_fd);
- return 0;
- }
-
- hwaddr->sa_family = AF_UNSPEC;
- memcpy(hwaddr->sa_data, ifreq.ifr_addr.sa_data, 6);
- close(nit_fd);
- return 1;
-}
-
-/*
- * have_route_to - determine if the system has any route to
- * a given IP address.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-int have_route_to(addr)
- u_int32_t addr;
-{
- return -1;
-}
-
-#define WTMPFILE "/usr/adm/wtmp"
-
-void
-logwtmp(line, name, host)
- const char *line, *name, *host;
-{
- int fd;
- struct stat buf;
- struct utmp ut;
-
- if ((fd = open(WTMPFILE, O_WRONLY|O_APPEND, 0)) < 0)
- return;
- if (!fstat(fd, &buf)) {
- strncpy(ut.ut_line, line, sizeof(ut.ut_line));
- strncpy(ut.ut_name, name, sizeof(ut.ut_name));
- strncpy(ut.ut_host, host, sizeof(ut.ut_host));
- (void)time(&ut.ut_time);
- if (write(fd, (char *)&ut, sizeof(struct utmp)) != sizeof(struct utmp))
- (void)ftruncate(fd, buf.st_size);
- }
- close(fd);
-}
-
-/*
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'. If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-u_int32_t
-GetMask(addr)
- u_int32_t addr;
-{
- u_int32_t mask, nmask, ina;
- struct ifreq *ifr, *ifend, ifreq;
- struct ifconf ifc;
-
- addr = ntohl(addr);
- if (IN_CLASSA(addr)) /* determine network mask for address class */
- nmask = IN_CLASSA_NET;
- else if (IN_CLASSB(addr))
- nmask = IN_CLASSB_NET;
- else
- nmask = IN_CLASSC_NET;
- /* class D nets are disallowed by bad_ip_adrs */
- mask = netmask | htonl(nmask);
-
- /*
- * Scan through the system's network interfaces.
- */
- ifc.ifc_len = MAX_IFS * sizeof(struct ifreq);
- ifc.ifc_req = alloca(ifc.ifc_len);
- if (ifc.ifc_req == 0)
- return mask;
- if (ioctl(sockfd, SIOCGIFCONF, &ifc) < 0) {
- warn("Couldn't get system interface list: %m");
- return mask;
- }
- ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
- for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) {
- /*
- * Check the interface's internet address.
- */
- if (ifr->ifr_addr.sa_family != AF_INET)
- continue;
- ina = INET_ADDR(ifr->ifr_addr);
- if ((ntohl(ina) & nmask) != (addr & nmask))
- continue;
- /*
- * Check that the interface is up, and not point-to-point or loopback.
- */
- strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
- if (ioctl(sockfd, SIOCGIFFLAGS, &ifreq) < 0)
- continue;
- if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK))
- != IFF_UP)
- continue;
- /*
- * Get its netmask and OR it into our mask.
- */
- if (ioctl(sockfd, SIOCGIFNETMASK, &ifreq) < 0)
- continue;
- mask |= INET_ADDR(ifreq.ifr_addr);
- }
-
- return mask;
-}
-
-static int
-strioctl(fd, cmd, ptr, ilen, olen)
- int fd, cmd, ilen, olen;
- void *ptr;
-{
- struct strioctl str;
-
- str.ic_cmd = cmd;
- str.ic_timout = 0;
- str.ic_len = ilen;
- str.ic_dp = ptr;
- if (ioctl(fd, I_STR, &str) == -1)
- return -1;
- if (str.ic_len != olen)
- dbglog("strioctl: expected %d bytes, got %d for cmd %x\n",
- olen, str.ic_len, cmd);
- return 0;
-}
-
-/*
- * Use the hostid as part of the random number seed.
- */
-int
-get_host_seed()
-{
- return gethostid();
-}
-
-#if 0
-/*
- * Code for locking/unlocking the serial device.
- * This code is derived from chat.c.
- */
-
-#if !defined(HDB) && !defined(SUNOS3)
-#define HDB 1 /* ascii lock files are the default */
-#endif
-
-#ifndef LOCK_DIR
-# if HDB
-# define PIDSTRING
-# define LOCK_PREFIX "/usr/spool/locks/LCK.."
-# else /* HDB */
-# define LOCK_PREFIX "/usr/spool/uucp/LCK.."
-# endif /* HDB */
-#endif /* LOCK_DIR */
-
-static char *lock_file; /* name of lock file created */
-
-/*
- * lock - create a lock file for the named device.
- */
-int
-lock(dev)
- char *dev;
-{
- char hdb_lock_buffer[12];
- int fd, pid, n;
- char *p;
- size_t l;
-
- if ((p = strrchr(dev, '/')) != NULL)
- dev = p + 1;
- l = strlen(LOCK_PREFIX) + strlen(dev) + 1;
- lock_file = malloc(l);
- if (lock_file == NULL)
- novm("lock file name");
- slprintf(lock_file, l, "%s%s", LOCK_PREFIX, dev);
-
- while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
- if (errno == EEXIST
- && (fd = open(lock_file, O_RDONLY, 0)) >= 0) {
- /* Read the lock file to find out who has the device locked */
-#ifdef PIDSTRING
- n = read(fd, hdb_lock_buffer, 11);
- if (n > 0) {
- hdb_lock_buffer[n] = 0;
- pid = atoi(hdb_lock_buffer);
- }
-#else
- n = read(fd, &pid, sizeof(pid));
-#endif
- if (n <= 0) {
- error("Can't read pid from lock file %s", lock_file);
- close(fd);
- } else {
- if (kill(pid, 0) == -1 && errno == ESRCH) {
- /* pid no longer exists - remove the lock file */
- if (unlink(lock_file) == 0) {
- close(fd);
- notice("Removed stale lock on %s (pid %d)",
- dev, pid);
- continue;
- } else
- warn("Couldn't remove stale lock on %s",
- dev);
- } else
- notice("Device %s is locked by pid %d",
- dev, pid);
- }
- close(fd);
- } else
- error("Can't create lock file %s: %m", lock_file);
- free(lock_file);
- lock_file = NULL;
- return -1;
- }
-
-#ifdef PIDSTRING
- slprintf(hdb_lock_buffer, sizeof(hdb_lock_buffer), "%10d\n", getpid());
- write(fd, hdb_lock_buffer, 11);
-#else
- pid = getpid();
- write(fd, &pid, sizeof pid);
-#endif
-
- close(fd);
- return 0;
-}
-
-/*
- * unlock - remove our lockfile
- */
-void
-unlock()
-{
- if (lock_file) {
- unlink(lock_file);
- free(lock_file);
- lock_file = NULL;
- }
-}
-#endif /* lock stuff removed */
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side
- * to the uid given. Assumes slave_name points to >= 12 bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
- int *master_fdp;
- int *slave_fdp;
- char *slave_name;
- int uid;
-{
- int i, mfd, sfd;
- char pty_name[12];
- struct termios tios;
-
- sfd = -1;
- for (i = 0; i < 64; ++i) {
- slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
- 'p' + i / 16, i % 16);
- mfd = open(pty_name, O_RDWR, 0);
- if (mfd >= 0) {
- pty_name[5] = 't';
- sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
- if (sfd >= 0)
- break;
- close(mfd);
- }
- }
- if (sfd < 0)
- return 0;
-
- strlcpy(slave_name, pty_name, 12);
- *master_fdp = mfd;
- *slave_fdp = sfd;
- fchown(sfd, uid, -1);
- fchmod(sfd, S_IRUSR | S_IWUSR);
- if (tcgetattr(sfd, &tios) == 0) {
- tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
- tios.c_cflag |= CS8 | CREAD;
- tios.c_iflag = IGNPAR | CLOCAL;
- tios.c_oflag = 0;
- tios.c_lflag = 0;
- if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
- warn("couldn't set attributes on pty: %m");
- } else
- warn("couldn't get attributes on pty: %m");
-
- return 1;
-}
-
-/*
- * SunOS doesn't have strtoul :-(
- */
-unsigned long
-strtoul(str, ptr, base)
- char *str, **ptr;
- int base;
-{
- return (unsigned long) strtol(str, ptr, base);
-}
-
-/*
- * Or strerror :-(
- */
-extern char *sys_errlist[];
-extern int sys_nerr;
-
-char *
-strerror(n)
- int n;
-{
- static char unknown[32];
-
- if (n > 0 && n < sys_nerr)
- return sys_errlist[n];
- slprintf(unknown, sizeof(unknown), "Error %d", n);
- return unknown;
-}
diff --git a/mdk-stage1/ppp/pppd/tdb.c b/mdk-stage1/ppp/pppd/tdb.c
deleted file mode 100644
index 7fd58291e..000000000
--- a/mdk-stage1/ppp/pppd/tdb.c
+++ /dev/null
@@ -1,1282 +0,0 @@
-/*
- * Database functions
- * Copyright (C) Andrew Tridgell 1999
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms AND provided that this software or
- * any derived work is only used as part of the PPP daemon (pppd)
- * and related utilities.
- * The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Note: this software is also available under the Gnu Public License
- * version 2 or later.
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include "tdb.h"
-
-#define TDB_VERSION (0x26011967 + 1)
-#define TDB_MAGIC (0x26011999U)
-#define TDB_FREE_MAGIC (~TDB_MAGIC)
-#define TDB_ALIGN 4
-#define MIN_REC_SIZE (2*sizeof(struct list_struct) + TDB_ALIGN)
-#define DEFAULT_HASH_SIZE 128
-#define TDB_PAGE_SIZE 0x2000
-#define TDB_LEN_MULTIPLIER 10
-#define FREELIST_TOP (sizeof(struct tdb_header))
-
-#define LOCK_SET 1
-#define LOCK_CLEAR 0
-
-/* lock offsets */
-#define GLOBAL_LOCK 0
-#define ACTIVE_LOCK 4
-#define LIST_LOCK_BASE 1024
-
-#define BUCKET(hash) ((hash) % tdb->header.hash_size)
-
-#ifndef MAP_FILE
-#define MAP_FILE 0
-#endif
-
-/* the body of the database is made of one list_struct for the free space
- plus a separate data list for each hash value */
-struct list_struct {
- tdb_len rec_len; /* total byte length of record */
- tdb_off next; /* offset of the next record in the list */
- tdb_len key_len; /* byte length of key */
- tdb_len data_len; /* byte length of data */
- unsigned full_hash; /* the full 32 bit hash of the key */
- unsigned magic; /* try to catch errors */
- /*
- the following union is implied
- union {
- char record[rec_len];
- struct {
- char key[key_len];
- char data[data_len];
- }
- }
- */
-};
-
-/* a null data record - useful for error returns */
-static TDB_DATA null_data;
-
-/* a byte range locking function - return 0 on success
- this functions locks/unlocks 1 byte at the specified offset */
-static int tdb_brlock(TDB_CONTEXT *tdb, tdb_off offset,
- int set, int rw_type, int lck_type)
-{
-#if NOLOCK
- return 0;
-#else
- struct flock fl;
-
- if (tdb->fd == -1) return 0; /* for in memory tdb */
-
- if (tdb->read_only) return -1;
-
- fl.l_type = set==LOCK_SET?rw_type:F_UNLCK;
- fl.l_whence = SEEK_SET;
- fl.l_start = offset;
- fl.l_len = 1;
- fl.l_pid = 0;
-
- if (fcntl(tdb->fd, lck_type, &fl) != 0) {
-#if TDB_DEBUG
- if (lck_type == F_SETLKW) {
- printf("lock %d failed at %d (%s)\n",
- set, offset, strerror(errno));
- }
-#endif
- tdb->ecode = TDB_ERR_LOCK;
- return -1;
- }
- return 0;
-#endif
-}
-
-/* lock a list in the database. list -1 is the alloc list */
-static int tdb_lock(TDB_CONTEXT *tdb, int list)
-{
- if (list < -1 || list >= (int)tdb->header.hash_size) {
-#if TDB_DEBUG
- printf("bad list %d\n", list);
-#endif
- return -1;
- }
- if (tdb->locked[list+1] == 0) {
- if (tdb_brlock(tdb, LIST_LOCK_BASE + 4*list, LOCK_SET,
- F_WRLCK, F_SETLKW) != 0) {
- return -1;
- }
- }
- tdb->locked[list+1]++;
- return 0;
-}
-
-/* unlock the database. */
-static int tdb_unlock(TDB_CONTEXT *tdb, int list)
-{
- if (list < -1 || list >= (int)tdb->header.hash_size) {
-#if TDB_DEBUG
- printf("bad unlock list %d\n", list);
-#endif
- return -1;
- }
-
- if (tdb->locked[list+1] == 0) {
-#if TDB_DEBUG
- printf("not locked %d\n", list);
-#endif
- tdb->ecode = TDB_ERR_LOCK;
- return -1;
- }
- if (tdb->locked[list+1] == 1) {
- if (tdb_brlock(tdb, LIST_LOCK_BASE + 4*list, LOCK_CLEAR,
- F_WRLCK, F_SETLKW) != 0) {
- return -1;
- }
- }
- tdb->locked[list+1]--;
- return 0;
-}
-
-/* the hash algorithm - turn a key into an integer
- This is based on the hash agorithm from gdbm */
-static unsigned tdb_hash(TDB_DATA *key)
-{
- unsigned value; /* Used to compute the hash value. */
- unsigned i; /* Used to cycle through random values. */
-
- /* Set the initial value from the key size. */
- value = 0x238F13AF * key->dsize;
- for (i=0; i < key->dsize; i++) {
- value = (value + (key->dptr[i] << (i*5 % 24)));
- }
-
- value = (1103515243 * value + 12345);
-
- return value;
-}
-
-/* find the top of the hash chain for an open database */
-static tdb_off tdb_hash_top(TDB_CONTEXT *tdb, unsigned hash)
-{
- tdb_off ret;
- hash = BUCKET(hash);
- ret = FREELIST_TOP + (hash+1)*sizeof(tdb_off);
- return ret;
-}
-
-
-/* check for an out of bounds access - if it is out of bounds then
- see if the database has been expanded by someone else and expand
- if necessary */
-static int tdb_oob(TDB_CONTEXT *tdb, tdb_off offset)
-{
- struct stat st;
- if ((offset <= tdb->map_size) || (tdb->fd == -1)) return 0;
-
- fstat(tdb->fd, &st);
- if (st.st_size <= (ssize_t)offset) {
- tdb->ecode = TDB_ERR_IO;
- return -1;
- }
-
-#if HAVE_MMAP
- if (tdb->map_ptr) {
- munmap(tdb->map_ptr, tdb->map_size);
- tdb->map_ptr = NULL;
- }
-#endif
-
- tdb->map_size = st.st_size;
-#if HAVE_MMAP
- tdb->map_ptr = (void *)mmap(NULL, tdb->map_size,
- tdb->read_only?PROT_READ:PROT_READ|PROT_WRITE,
- MAP_SHARED | MAP_FILE, tdb->fd, 0);
-#endif
- return 0;
-}
-
-
-/* write a lump of data at a specified offset */
-static int tdb_write(TDB_CONTEXT *tdb, tdb_off offset, const char *buf, tdb_len len)
-{
- if (tdb_oob(tdb, offset + len) != 0) {
- /* oops - trying to write beyond the end of the database! */
- return -1;
- }
-
- if (tdb->map_ptr) {
- memcpy(offset + (char *)tdb->map_ptr, buf, len);
- } else {
- if (lseek(tdb->fd, offset, SEEK_SET) != offset ||
- write(tdb->fd, buf, len) != (ssize_t)len) {
- tdb->ecode = TDB_ERR_IO;
- return -1;
- }
- }
- return 0;
-}
-
-/* read a lump of data at a specified offset */
-static int tdb_read(TDB_CONTEXT *tdb, tdb_off offset, char *buf, tdb_len len)
-{
- if (tdb_oob(tdb, offset + len) != 0) {
- /* oops - trying to read beyond the end of the database! */
- return -1;
- }
-
- if (tdb->map_ptr) {
- memcpy(buf, offset + (char *)tdb->map_ptr, len);
- } else {
- if (lseek(tdb->fd, offset, SEEK_SET) != offset ||
- read(tdb->fd, buf, len) != (ssize_t)len) {
- tdb->ecode = TDB_ERR_IO;
- return -1;
- }
- }
- return 0;
-}
-
-
-/* read a lump of data, allocating the space for it */
-static char *tdb_alloc_read(TDB_CONTEXT *tdb, tdb_off offset, tdb_len len)
-{
- char *buf;
-
- buf = (char *)malloc(len);
-
- if (!buf) {
- tdb->ecode = TDB_ERR_OOM;
- return NULL;
- }
-
- if (tdb_read(tdb, offset, buf, len) == -1) {
- free(buf);
- return NULL;
- }
-
- return buf;
-}
-
-/* convenience routine for writing a record */
-static int rec_write(TDB_CONTEXT *tdb, tdb_off offset, struct list_struct *rec)
-{
- return tdb_write(tdb, offset, (char *)rec, sizeof(*rec));
-}
-
-/* convenience routine for writing a tdb_off */
-static int ofs_write(TDB_CONTEXT *tdb, tdb_off offset, tdb_off *d)
-{
- return tdb_write(tdb, offset, (char *)d, sizeof(*d));
-}
-
-/* read a tdb_off from the store */
-static int ofs_read(TDB_CONTEXT *tdb, tdb_off offset, tdb_off *d)
-{
- return tdb_read(tdb, offset, (char *)d, sizeof(*d));
-}
-
-/* read a record and check for simple errors */
-static int rec_read(TDB_CONTEXT *tdb, tdb_off offset, struct list_struct *rec)
-{
- if (tdb_read(tdb, offset, (char *)rec, sizeof(*rec)) == -1) return -1;
- if (rec->magic != TDB_MAGIC) {
-#if TDB_DEBUG
- printf("bad magic 0x%08x at offset %d\n",
- rec->magic, offset);
-#endif
- tdb->ecode = TDB_ERR_CORRUPT;
- return -1;
- }
- if (tdb_oob(tdb, rec->next) != 0) {
- return -1;
- }
- return 0;
-}
-
-/* expand the database at least length bytes by expanding the
- underlying file and doing the mmap again if necessary */
-static int tdb_expand(TDB_CONTEXT *tdb, tdb_off length)
-{
- struct list_struct rec;
- tdb_off offset, ptr;
- char b = 0;
-
- tdb_lock(tdb,-1);
-
- /* make sure we know about any previous expansions by another
- process */
- tdb_oob(tdb,tdb->map_size + 1);
-
- /* always make room for at least 10 more records */
- length *= TDB_LEN_MULTIPLIER;
-
- /* and round the database up to a multiple of TDB_PAGE_SIZE */
- length = ((tdb->map_size + length + TDB_PAGE_SIZE) & ~(TDB_PAGE_SIZE - 1)) - tdb->map_size;
-
- /* expand the file itself */
- if (tdb->fd != -1) {
- lseek(tdb->fd, tdb->map_size + length - 1, SEEK_SET);
- if (write(tdb->fd, &b, 1) != 1) goto fail;
- }
-
- /* form a new freelist record */
- offset = FREELIST_TOP;
- rec.rec_len = length - sizeof(rec);
- rec.magic = TDB_FREE_MAGIC;
- if (ofs_read(tdb, offset, &rec.next) == -1) {
- goto fail;
- }
-
-#if HAVE_MMAP
- if (tdb->fd != -1 && tdb->map_ptr) {
- munmap(tdb->map_ptr, tdb->map_size);
- tdb->map_ptr = NULL;
- }
-#endif
-
- tdb->map_size += length;
-
- if (tdb->fd == -1) {
- tdb->map_ptr = realloc(tdb->map_ptr, tdb->map_size);
- }
-
- /* write it out */
- if (rec_write(tdb, tdb->map_size - length, &rec) == -1) {
- goto fail;
- }
-
- /* link it into the free list */
- ptr = tdb->map_size - length;
- if (ofs_write(tdb, offset, &ptr) == -1) goto fail;
-
-#if HAVE_MMAP
- if (tdb->fd != -1) {
- tdb->map_ptr = (void *)mmap(NULL, tdb->map_size,
- PROT_READ|PROT_WRITE,
- MAP_SHARED | MAP_FILE, tdb->fd, 0);
- }
-#endif
-
- tdb_unlock(tdb, -1);
- return 0;
-
- fail:
- tdb_unlock(tdb,-1);
- return -1;
-}
-
-/* allocate some space from the free list. The offset returned points
- to a unconnected list_struct within the database with room for at
- least length bytes of total data
-
- 0 is returned if the space could not be allocated
- */
-static tdb_off tdb_allocate(TDB_CONTEXT *tdb, tdb_len length)
-{
- tdb_off offset, rec_ptr, last_ptr;
- struct list_struct rec, lastrec, newrec;
-
- tdb_lock(tdb, -1);
-
- again:
- last_ptr = 0;
- offset = FREELIST_TOP;
-
- /* read in the freelist top */
- if (ofs_read(tdb, offset, &rec_ptr) == -1) {
- goto fail;
- }
-
- /* keep looking until we find a freelist record that is big
- enough */
- while (rec_ptr) {
- if (tdb_read(tdb, rec_ptr, (char *)&rec, sizeof(rec)) == -1) {
- goto fail;
- }
-
- if (rec.magic != TDB_FREE_MAGIC) {
-#if TDB_DEBUG
- printf("bad magic 0x%08x in free list\n", rec.magic);
-#endif
- goto fail;
- }
-
- if (rec.rec_len >= length) {
- /* found it - now possibly split it up */
- if (rec.rec_len > length + MIN_REC_SIZE) {
- length = (length + TDB_ALIGN) & ~(TDB_ALIGN-1);
-
- newrec.rec_len = rec.rec_len - (sizeof(rec) + length);
- newrec.next = rec.next;
- newrec.magic = TDB_FREE_MAGIC;
-
- rec.rec_len = length;
- rec.next = rec_ptr + sizeof(rec) + rec.rec_len;
-
- if (rec_write(tdb, rec.next, &newrec) == -1) {
- goto fail;
- }
-
- if (rec_write(tdb, rec_ptr, &rec) == -1) {
- goto fail;
- }
- }
-
- /* remove it from the list */
- if (last_ptr == 0) {
- offset = FREELIST_TOP;
-
- if (ofs_write(tdb, offset, &rec.next) == -1) {
- goto fail;
- }
- } else {
- lastrec.next = rec.next;
- if (rec_write(tdb, last_ptr, &lastrec) == -1) {
- goto fail;
- }
- }
-
- /* all done - return the new record offset */
- tdb_unlock(tdb, -1);
- return rec_ptr;
- }
-
- /* move to the next record */
- lastrec = rec;
- last_ptr = rec_ptr;
- rec_ptr = rec.next;
- }
-
- /* we didn't find enough space. See if we can expand the
- database and if we can then try again */
- if (tdb_expand(tdb, length + sizeof(rec)) == 0) goto again;
-
- fail:
-#if TDB_DEBUG
- printf("tdb_allocate failed for size %u\n", length);
-#endif
- tdb_unlock(tdb, -1);
- return 0;
-}
-
-/* initialise a new database with a specified hash size */
-static int tdb_new_database(TDB_CONTEXT *tdb, int hash_size)
-{
- struct tdb_header header;
- tdb_off offset;
- int i, size = 0;
- tdb_off buf[16];
-
- /* create the header */
- memset(&header, 0, sizeof(header));
- memcpy(header.magic_food, TDB_MAGIC_FOOD, strlen(TDB_MAGIC_FOOD)+1);
- header.version = TDB_VERSION;
- header.hash_size = hash_size;
- lseek(tdb->fd, 0, SEEK_SET);
- ftruncate(tdb->fd, 0);
-
- if (tdb->fd != -1 && write(tdb->fd, &header, sizeof(header)) !=
- sizeof(header)) {
- tdb->ecode = TDB_ERR_IO;
- return -1;
- } else size += sizeof(header);
-
- /* the freelist and hash pointers */
- offset = 0;
- memset(buf, 0, sizeof(buf));
-
- for (i=0;(hash_size+1)-i >= 16; i += 16) {
- if (tdb->fd != -1 && write(tdb->fd, buf, sizeof(buf)) !=
- sizeof(buf)) {
- tdb->ecode = TDB_ERR_IO;
- return -1;
- } else size += sizeof(buf);
- }
-
- for (;i<hash_size+1; i++) {
- if (tdb->fd != -1 && write(tdb->fd, buf, sizeof(tdb_off)) !=
- sizeof(tdb_off)) {
- tdb->ecode = TDB_ERR_IO;
- return -1;
- } else size += sizeof(tdb_off);
- }
-
- if (tdb->fd == -1) {
- tdb->map_ptr = calloc(size, 1);
- tdb->map_size = size;
- if (tdb->map_ptr == NULL) {
- tdb->ecode = TDB_ERR_IO;
- return -1;
- }
- memcpy(&tdb->header, &header, sizeof(header));
- }
-
-#if TDB_DEBUG
- printf("initialised database of hash_size %u\n",
- hash_size);
-#endif
- return 0;
-}
-
-/* Returns 0 on fail. On success, return offset of record, and fills
- in rec */
-static tdb_off tdb_find(TDB_CONTEXT *tdb, TDB_DATA key, unsigned int hash,
- struct list_struct *rec)
-{
- tdb_off offset, rec_ptr;
-
- /* find the top of the hash chain */
- offset = tdb_hash_top(tdb, hash);
-
- /* read in the hash top */
- if (ofs_read(tdb, offset, &rec_ptr) == -1)
- return 0;
-
- /* keep looking until we find the right record */
- while (rec_ptr) {
- if (rec_read(tdb, rec_ptr, rec) == -1)
- return 0;
-
- if (hash == rec->full_hash && key.dsize == rec->key_len) {
- char *k;
- /* a very likely hit - read the key */
- k = tdb_alloc_read(tdb, rec_ptr + sizeof(*rec),
- rec->key_len);
-
- if (!k)
- return 0;
-
- if (memcmp(key.dptr, k, key.dsize) == 0) {
- free(k);
- return rec_ptr;
- }
- free(k);
- }
-
- /* move to the next record */
- rec_ptr = rec->next;
- }
- return 0;
-}
-
-/*
- return an error string for the last tdb error
-*/
-char *tdb_error(TDB_CONTEXT *tdb)
-{
- int i;
- static struct {
- enum TDB_ERROR ecode;
- char *estring;
- } emap[] = {
- {TDB_SUCCESS, "Success"},
- {TDB_ERR_CORRUPT, "Corrupt database"},
- {TDB_ERR_IO, "IO Error"},
- {TDB_ERR_LOCK, "Locking error"},
- {TDB_ERR_OOM, "Out of memory"},
- {TDB_ERR_EXISTS, "Record exists"},
- {-1, NULL}};
- if (tdb != NULL) {
- for (i=0;emap[i].estring;i++) {
- if (tdb->ecode == emap[i].ecode) return emap[i].estring;
- }
- } else {
- return "Invalid tdb context";
- }
- return "Invalid error code";
-}
-
-
-/* update an entry in place - this only works if the new data size
- is <= the old data size and the key exists.
- on failure return -1
-*/
-int tdb_update(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf)
-{
- unsigned hash;
- struct list_struct rec;
- tdb_off rec_ptr;
- int ret = -1;
-
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_update() called with null context\n");
-#endif
- return -1;
- }
-
- /* find which hash bucket it is in */
- hash = tdb_hash(&key);
-
- tdb_lock(tdb, BUCKET(hash));
- rec_ptr = tdb_find(tdb, key, hash, &rec);
-
- if (!rec_ptr)
- goto out;
-
- /* must be long enough */
- if (rec.rec_len < key.dsize + dbuf.dsize)
- goto out;
-
- if (tdb_write(tdb, rec_ptr + sizeof(rec) + rec.key_len,
- dbuf.dptr, dbuf.dsize) == -1)
- goto out;
-
- if (dbuf.dsize != rec.data_len) {
- /* update size */
- rec.data_len = dbuf.dsize;
- ret = rec_write(tdb, rec_ptr, &rec);
- } else
- ret = 0;
-
- out:
- tdb_unlock(tdb, BUCKET(hash));
- return ret;
-}
-
-/* find an entry in the database given a key */
-TDB_DATA tdb_fetch(TDB_CONTEXT *tdb, TDB_DATA key)
-{
- unsigned hash;
- tdb_off rec_ptr;
- struct list_struct rec;
- TDB_DATA ret = null_data;
-
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_fetch() called with null context\n");
-#endif
- return null_data;
- }
-
- /* find which hash bucket it is in */
- hash = tdb_hash(&key);
-
- tdb_lock(tdb, BUCKET(hash));
- rec_ptr = tdb_find(tdb, key, hash, &rec);
-
- if (rec_ptr) {
- ret.dptr = tdb_alloc_read(tdb,
- rec_ptr + sizeof(rec) + rec.key_len,
- rec.data_len);
- ret.dsize = rec.data_len;
- }
-
- tdb_unlock(tdb, BUCKET(hash));
- return ret;
-}
-
-/* check if an entry in the database exists
-
- note that 1 is returned if the key is found and 0 is returned if not found
- this doesn't match the conventions in the rest of this module, but is
- compatible with gdbm
-*/
-int tdb_exists(TDB_CONTEXT *tdb, TDB_DATA key)
-{
- unsigned hash;
- tdb_off rec_ptr;
- struct list_struct rec;
-
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_exists() called with null context\n");
-#endif
- return 0;
- }
-
- /* find which hash bucket it is in */
- hash = tdb_hash(&key);
-
- tdb_lock(tdb, BUCKET(hash));
- rec_ptr = tdb_find(tdb, key, hash, &rec);
- tdb_unlock(tdb, BUCKET(hash));
-
- return rec_ptr != 0;
-}
-
-/* traverse the entire database - calling fn(tdb, key, data) on each element.
- return -1 on error or the record count traversed
- if fn is NULL then it is not called
- a non-zero return value from fn() indicates that the traversal should stop
- */
-int tdb_traverse(TDB_CONTEXT *tdb, int (*fn)(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, void* state), void* state)
-{
- int count = 0;
- unsigned h;
- tdb_off offset, rec_ptr;
- struct list_struct rec;
- char *data;
- TDB_DATA key, dbuf;
-
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_traverse() called with null context\n");
-#endif
- return -1;
- }
-
- /* loop over all hash chains */
- for (h = 0; h < tdb->header.hash_size; h++) {
- tdb_lock(tdb, BUCKET(h));
-
- /* read in the hash top */
- offset = tdb_hash_top(tdb, h);
- if (ofs_read(tdb, offset, &rec_ptr) == -1) {
- goto fail;
- }
-
- /* traverse all records for this hash */
- while (rec_ptr) {
- if (rec_read(tdb, rec_ptr, &rec) == -1) {
- goto fail;
- }
-
- /* now read the full record */
- data = tdb_alloc_read(tdb, rec_ptr + sizeof(rec),
- rec.key_len + rec.data_len);
- if (!data) {
- goto fail;
- }
-
- key.dptr = data;
- key.dsize = rec.key_len;
- dbuf.dptr = data + rec.key_len;
- dbuf.dsize = rec.data_len;
- count++;
-
- if (fn && fn(tdb, key, dbuf, state) != 0) {
- /* they want us to stop traversing */
- free(data);
- tdb_unlock(tdb, BUCKET(h));
- return count;
- }
-
- /* a miss - drat */
- free(data);
-
- /* move to the next record */
- rec_ptr = rec.next;
- }
- tdb_unlock(tdb, BUCKET(h));
- }
-
- /* return the number traversed */
- return count;
-
- fail:
- tdb_unlock(tdb, BUCKET(h));
- return -1;
-}
-
-
-/* find the first entry in the database and return its key */
-TDB_DATA tdb_firstkey(TDB_CONTEXT *tdb)
-{
- tdb_off offset, rec_ptr;
- struct list_struct rec;
- unsigned hash;
- TDB_DATA ret;
-
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_firstkey() called with null context\n");
-#endif
- return null_data;
- }
-
- /* look for a non-empty hash chain */
- for (hash = 0, rec_ptr = 0;
- hash < tdb->header.hash_size;
- hash++) {
- /* find the top of the hash chain */
- offset = tdb_hash_top(tdb, hash);
-
- tdb_lock(tdb, BUCKET(hash));
-
- /* read in the hash top */
- if (ofs_read(tdb, offset, &rec_ptr) == -1) {
- goto fail;
- }
-
- if (rec_ptr) break;
-
- tdb_unlock(tdb, BUCKET(hash));
- }
-
- if (rec_ptr == 0) return null_data;
-
- /* we've found a non-empty chain, now read the record */
- if (rec_read(tdb, rec_ptr, &rec) == -1) {
- goto fail;
- }
-
- /* allocate and read the key space */
- ret.dptr = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), rec.key_len);
- ret.dsize = rec.key_len;
- tdb_unlock(tdb, BUCKET(hash));
- return ret;
-
- fail:
- tdb_unlock(tdb, BUCKET(hash));
- return null_data;
-}
-
-/* find the next entry in the database, returning its key */
-TDB_DATA tdb_nextkey(TDB_CONTEXT *tdb, TDB_DATA key)
-{
- unsigned hash, hbucket;
- tdb_off rec_ptr, offset;
- struct list_struct rec;
- TDB_DATA ret;
-
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_nextkey() called with null context\n");
-#endif
- return null_data;
- }
-
- /* find which hash bucket it is in */
- hash = tdb_hash(&key);
- hbucket = BUCKET(hash);
-
- tdb_lock(tdb, hbucket);
- rec_ptr = tdb_find(tdb, key, hash, &rec);
- if (rec_ptr) {
- /* we want the next record after this one */
- rec_ptr = rec.next;
- }
-
- /* not found or last in hash: look for next non-empty hash chain */
- while (rec_ptr == 0) {
- tdb_unlock(tdb, hbucket);
-
- if (++hbucket >= tdb->header.hash_size - 1)
- return null_data;
-
- offset = tdb_hash_top(tdb, hbucket);
- tdb_lock(tdb, hbucket);
- /* read in the hash top */
- if (ofs_read(tdb, offset, &rec_ptr) == -1) {
- tdb_unlock(tdb, hbucket);
- return null_data;
- }
- }
-
- /* Read the record. */
- if (rec_read(tdb, rec_ptr, &rec) == -1) {
- tdb_unlock(tdb, hbucket);
- return null_data;
- }
- /* allocate and read the key */
- ret.dptr = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), rec.key_len);
- ret.dsize = rec.key_len;
- tdb_unlock(tdb, hbucket);
-
- return ret;
-}
-
-/* delete an entry in the database given a key */
-int tdb_delete(TDB_CONTEXT *tdb, TDB_DATA key)
-{
- unsigned hash;
- tdb_off offset, rec_ptr, last_ptr;
- struct list_struct rec, lastrec;
- char *data = NULL;
-
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_delete() called with null context\n");
-#endif
- return -1;
- }
-
- /* find which hash bucket it is in */
- hash = tdb_hash(&key);
-
- tdb_lock(tdb, BUCKET(hash));
-
- /* find the top of the hash chain */
- offset = tdb_hash_top(tdb, hash);
-
- /* read in the hash top */
- if (ofs_read(tdb, offset, &rec_ptr) == -1) {
- goto fail;
- }
-
- last_ptr = 0;
-
- /* keep looking until we find the right record */
- while (rec_ptr) {
- if (rec_read(tdb, rec_ptr, &rec) == -1) {
- goto fail;
- }
-
- if (hash == rec.full_hash && key.dsize == rec.key_len) {
- /* a very likely hit - read the record and full key */
- data = tdb_alloc_read(tdb, rec_ptr + sizeof(rec),
- rec.key_len);
- if (!data) {
- goto fail;
- }
-
- if (memcmp(key.dptr, data, key.dsize) == 0) {
- /* a definite match - delete it */
- if (last_ptr == 0) {
- offset = tdb_hash_top(tdb, hash);
- if (ofs_write(tdb, offset, &rec.next) == -1) {
- goto fail;
- }
- } else {
- lastrec.next = rec.next;
- if (rec_write(tdb, last_ptr, &lastrec) == -1) {
- goto fail;
- }
- }
- tdb_unlock(tdb, BUCKET(hash));
- tdb_lock(tdb, -1);
- /* and recover the space */
- offset = FREELIST_TOP;
- if (ofs_read(tdb, offset, &rec.next) == -1) {
- goto fail2;
- }
- rec.magic = TDB_FREE_MAGIC;
- if (rec_write(tdb, rec_ptr, &rec) == -1) {
- goto fail2;
- }
- if (ofs_write(tdb, offset, &rec_ptr) == -1) {
- goto fail2;
- }
-
- /* yipee - all done */
- free(data);
- tdb_unlock(tdb, -1);
- return 0;
- }
-
- /* a miss - drat */
- free(data);
- data = NULL;
- }
-
- /* move to the next record */
- last_ptr = rec_ptr;
- lastrec = rec;
- rec_ptr = rec.next;
- }
-
- fail:
- if (data) free(data);
- tdb_unlock(tdb, BUCKET(hash));
- return -1;
-
- fail2:
- if (data) free(data);
- tdb_unlock(tdb, -1);
- return -1;
-}
-
-
-/* store an element in the database, replacing any existing element
- with the same key
-
- return 0 on success, -1 on failure
-*/
-int tdb_store(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, int flag)
-{
- struct list_struct rec;
- unsigned hash;
- tdb_off rec_ptr, offset;
- char *p = NULL;
-
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_store() called with null context\n");
-#endif
- return -1;
- }
-
- /* find which hash bucket it is in */
- hash = tdb_hash(&key);
-
- /* check for it existing */
- if (flag == TDB_INSERT && tdb_exists(tdb, key)) {
- tdb->ecode = TDB_ERR_EXISTS;
- return -1;
- }
-
- /* first try in-place update */
- if (flag != TDB_INSERT && tdb_update(tdb, key, dbuf) == 0) {
- return 0;
- }
-
- rec_ptr = tdb_allocate(tdb, key.dsize + dbuf.dsize);
- if (rec_ptr == 0) {
- return -1;
- }
-
- tdb_lock(tdb, BUCKET(hash));
-
- /* delete any existing record - if it doesn't exist we don't care */
- if (flag != TDB_INSERT) {
- tdb_delete(tdb, key);
- }
-
- /* read the newly created record */
- if (tdb_read(tdb, rec_ptr, (char *)&rec, sizeof(rec)) == -1) {
- goto fail;
- }
-
- if (rec.magic != TDB_FREE_MAGIC) goto fail;
-
- /* find the top of the hash chain */
- offset = tdb_hash_top(tdb, hash);
-
- /* read in the hash top diretcly into our next pointer */
- if (ofs_read(tdb, offset, &rec.next) == -1) {
- goto fail;
- }
-
- rec.key_len = key.dsize;
- rec.data_len = dbuf.dsize;
- rec.full_hash = hash;
- rec.magic = TDB_MAGIC;
-
- p = (char *)malloc(sizeof(rec) + key.dsize + dbuf.dsize);
- if (!p) {
- tdb->ecode = TDB_ERR_OOM;
- goto fail;
- }
-
- memcpy(p, &rec, sizeof(rec));
- memcpy(p+sizeof(rec), key.dptr, key.dsize);
- memcpy(p+sizeof(rec)+key.dsize, dbuf.dptr, dbuf.dsize);
-
- if (tdb_write(tdb, rec_ptr, p, sizeof(rec)+key.dsize+dbuf.dsize) == -1)
- goto fail;
-
- free(p);
- p = NULL;
-
- /* and point the top of the hash chain at it */
- if (ofs_write(tdb, offset, &rec_ptr) == -1) goto fail;
-
- tdb_unlock(tdb, BUCKET(hash));
- return 0;
-
- fail:
-#if TDB_DEBUG
- printf("store failed for hash 0x%08x in bucket %u\n", hash, BUCKET(hash));
-#endif
- if (p) free(p);
- tdb_unlock(tdb, BUCKET(hash));
- return -1;
-}
-
-
-/* open the database, creating it if necessary
-
- The open_flags and mode are passed straight to the open call on the database
- file. A flags value of O_WRONLY is invalid
-
- The hash size is advisory, use zero for a default value.
-
- return is NULL on error
-*/
-TDB_CONTEXT *tdb_open(char *name, int hash_size, int tdb_flags,
- int open_flags, mode_t mode)
-{
- TDB_CONTEXT tdb, *ret;
- struct stat st;
-
- memset(&tdb, 0, sizeof(tdb));
-
- tdb.fd = -1;
- tdb.name = NULL;
- tdb.map_ptr = NULL;
-
- if ((open_flags & O_ACCMODE) == O_WRONLY) {
- goto fail;
- }
-
- if (hash_size == 0) hash_size = DEFAULT_HASH_SIZE;
-
- tdb.read_only = ((open_flags & O_ACCMODE) == O_RDONLY);
-
- if (name != NULL) {
- tdb.fd = open(name, open_flags, mode);
- if (tdb.fd == -1) {
- goto fail;
- }
- }
-
- /* ensure there is only one process initialising at once */
- tdb_brlock(&tdb, GLOBAL_LOCK, LOCK_SET, F_WRLCK, F_SETLKW);
-
- if (tdb_flags & TDB_CLEAR_IF_FIRST) {
- /* we need to zero the database if we are the only
- one with it open */
- if (tdb_brlock(&tdb, ACTIVE_LOCK, LOCK_SET, F_WRLCK, F_SETLK) == 0) {
- ftruncate(tdb.fd, 0);
- tdb_brlock(&tdb, ACTIVE_LOCK, LOCK_CLEAR, F_WRLCK, F_SETLK);
- }
- }
-
- /* leave this lock in place */
- tdb_brlock(&tdb, ACTIVE_LOCK, LOCK_SET, F_RDLCK, F_SETLKW);
-
- if (read(tdb.fd, &tdb.header, sizeof(tdb.header)) != sizeof(tdb.header) ||
- strcmp(tdb.header.magic_food, TDB_MAGIC_FOOD) != 0 ||
- tdb.header.version != TDB_VERSION) {
- /* its not a valid database - possibly initialise it */
- if (!(open_flags & O_CREAT)) {
- goto fail;
- }
- if (tdb_new_database(&tdb, hash_size) == -1) goto fail;
-
- lseek(tdb.fd, 0, SEEK_SET);
- if (tdb.fd != -1 && read(tdb.fd, &tdb.header,
- sizeof(tdb.header)) !=
- sizeof(tdb.header))
- goto fail;
- }
-
- if (tdb.fd != -1) {
- fstat(tdb.fd, &st);
-
- /* map the database and fill in the return structure */
- tdb.name = (char *)strdup(name);
- tdb.map_size = st.st_size;
- }
-
- tdb.locked = (int *)calloc(tdb.header.hash_size+1,
- sizeof(tdb.locked[0]));
- if (!tdb.locked) {
- goto fail;
- }
-
-#if HAVE_MMAP
- if (tdb.fd != -1) {
- tdb.map_ptr = (void *)mmap(NULL, st.st_size,
- tdb.read_only? PROT_READ : PROT_READ|PROT_WRITE,
- MAP_SHARED | MAP_FILE, tdb.fd, 0);
- }
-#endif
-
- ret = (TDB_CONTEXT *)malloc(sizeof(tdb));
- if (!ret) goto fail;
-
- *ret = tdb;
-
-#if TDB_DEBUG
- printf("mapped database of hash_size %u map_size=%u\n",
- hash_size, tdb.map_size);
-#endif
-
- tdb_brlock(&tdb, GLOBAL_LOCK, LOCK_CLEAR, F_WRLCK, F_SETLKW);
- return ret;
-
- fail:
- if (tdb.name) free(tdb.name);
- if (tdb.fd != -1) close(tdb.fd);
- if (tdb.map_ptr) munmap(tdb.map_ptr, tdb.map_size);
-
- return NULL;
-}
-
-/* close a database */
-int tdb_close(TDB_CONTEXT *tdb)
-{
- if (!tdb) return -1;
-
- if (tdb->name) free(tdb->name);
- if (tdb->fd != -1) close(tdb->fd);
- if (tdb->locked) free(tdb->locked);
-
- if (tdb->map_ptr) {
- if (tdb->fd != -1) {
- munmap(tdb->map_ptr, tdb->map_size);
- } else {
- free(tdb->map_ptr);
- }
- }
-
- memset(tdb, 0, sizeof(*tdb));
- free(tdb);
-
- return 0;
-}
-
-/* lock the database. If we already have it locked then don't do anything */
-int tdb_writelock(TDB_CONTEXT *tdb)
-{
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_writelock() called with null context\n");
-#endif
- return -1;
- }
-
- return tdb_lock(tdb, -1);
-}
-
-/* unlock the database. */
-int tdb_writeunlock(TDB_CONTEXT *tdb)
-{
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_writeunlock() called with null context\n");
-#endif
- return -1;
- }
-
- return tdb_unlock(tdb, -1);
-}
-
-/* lock one hash chain. This is meant to be used to reduce locking
- contention - it cannot guarantee how many records will be locked */
-int tdb_lockchain(TDB_CONTEXT *tdb, TDB_DATA key)
-{
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_lockchain() called with null context\n");
-#endif
- return -1;
- }
-
- return tdb_lock(tdb, BUCKET(tdb_hash(&key)));
-}
-
-
-/* unlock one hash chain */
-int tdb_unlockchain(TDB_CONTEXT *tdb, TDB_DATA key)
-{
- if (tdb == NULL) {
-#ifdef TDB_DEBUG
- printf("tdb_unlockchain() called with null context\n");
-#endif
- return -1;
- }
-
- return tdb_unlock(tdb, BUCKET(tdb_hash(&key)));
-}
diff --git a/mdk-stage1/ppp/pppd/tdb.h b/mdk-stage1/ppp/pppd/tdb.h
deleted file mode 100644
index 56ae0ac2a..000000000
--- a/mdk-stage1/ppp/pppd/tdb.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#define STANDALONE 1
-/*
- * Database functions
- * Copyright (C) Andrew Tridgell 1999
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms AND provided that this software or
- * any derived work is only used as part of the PPP daemon (pppd)
- * and related utilities.
- * The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Note: this software is also available under the Gnu Public License
- * version 2 or later.
- */
-
-typedef unsigned tdb_len;
-typedef unsigned tdb_off;
-
-#define TDB_MAGIC_FOOD "TDB file\n"
-
-/* this is stored at the front of every database */
-struct tdb_header {
- char magic_food[32]; /* for /etc/magic */
- unsigned version; /* version of the code */
- unsigned hash_size; /* number of hash entries */
-};
-
-typedef struct {
- char *dptr;
- size_t dsize;
-} TDB_DATA;
-
-/* this is the context structure that is returned from a db open */
-typedef struct {
- char *name; /* the name of the database */
- void *map_ptr; /* where it is currently mapped */
- int fd; /* open file descriptor for the database */
- tdb_len map_size; /* how much space has been mapped */
- int read_only; /* opened read-only */
- int *locked; /* set if we have a chain locked */
- int ecode; /* error code for last tdb error */
- struct tdb_header header; /* a cached copy of the header */
-} TDB_CONTEXT;
-
-/* flags to tdb_store() */
-#define TDB_REPLACE 1
-#define TDB_INSERT 2
-
-/* flags for tdb_open() */
-#define TDB_CLEAR_IF_FIRST 1
-
-/* error codes */
-enum TDB_ERROR {TDB_SUCCESS=0, TDB_ERR_CORRUPT, TDB_ERR_IO, TDB_ERR_LOCK,
- TDB_ERR_OOM, TDB_ERR_EXISTS};
-
-#if STANDALONE
-TDB_CONTEXT *tdb_open(char *name, int hash_size, int tdb_flags,
- int open_flags, mode_t mode);
-char *tdb_error(TDB_CONTEXT *tdb);
-int tdb_writelock(TDB_CONTEXT *tdb);
-int tdb_writeunlock(TDB_CONTEXT *tdb);
-TDB_DATA tdb_fetch(TDB_CONTEXT *tdb, TDB_DATA key);
-int tdb_delete(TDB_CONTEXT *tdb, TDB_DATA key);
-int tdb_store(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, int flag);
-int tdb_close(TDB_CONTEXT *tdb);
-TDB_DATA tdb_firstkey(TDB_CONTEXT *tdb);
-TDB_DATA tdb_nextkey(TDB_CONTEXT *tdb, TDB_DATA key);
-int tdb_traverse(TDB_CONTEXT *tdb,
- int (*fn)(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, void *state),
- void *state);
-int tdb_exists(TDB_CONTEXT *tdb, TDB_DATA key);
-#endif
diff --git a/mdk-stage1/ppp/pppd/tty.c b/mdk-stage1/ppp/pppd/tty.c
deleted file mode 100644
index 4db707968..000000000
--- a/mdk-stage1/ppp/pppd/tty.c
+++ /dev/null
@@ -1,1164 +0,0 @@
-/*
- * tty.c - code for handling serial ports in pppd.
- *
- * Copyright (C) 2000 Paul Mackerras.
- * All rights reserved.
- *
- * Portions Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <netdb.h>
-#include <utmp.h>
-#include <pwd.h>
-#include <setjmp.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-
-void tty_process_extra_options __P((void));
-void tty_check_options __P((void));
-int connect_tty __P((void));
-void disconnect_tty __P((void));
-void tty_close_fds __P((void));
-void cleanup_tty __P((void));
-void tty_do_send_config __P((int, u_int32_t, int, int));
-
-static int setdevname __P((char *, char **, int));
-static int setspeed __P((char *, char **, int));
-static int setxonxoff __P((char **));
-static int setescape __P((char **));
-static void printescape __P((option_t *, void (*)(void *, char *,...),void *));
-static void finish_tty __P((void));
-static int start_charshunt __P((int, int));
-static void stop_charshunt __P((void *, int));
-static void charshunt_done __P((void *));
-static void charshunt __P((int, int, char *));
-static int record_write __P((FILE *, int code, u_char *buf, int nb,
- struct timeval *));
-static int open_socket __P((char *));
-static void maybe_relock __P((void *, int));
-
-static int pty_master; /* fd for master side of pty */
-static int pty_slave; /* fd for slave side of pty */
-static int real_ttyfd; /* fd for actual serial port (not pty) */
-static int ttyfd; /* Serial port file descriptor */
-static char speed_str[16]; /* Serial port speed as string */
-
-mode_t tty_mode = (mode_t)-1; /* Original access permissions to tty */
-int baud_rate; /* Actual bits/second for serial device */
-char *callback_script; /* script for doing callback */
-int charshunt_pid; /* Process ID for charshunt */
-int locked; /* lock() has succeeded */
-struct stat devstat; /* result of stat() on devnam */
-
-/* option variables */
-int crtscts = 0; /* Use hardware flow control */
-bool modem = 1; /* Use modem control lines */
-int inspeed = 0; /* Input/Output speed requested */
-bool lockflag = 0; /* Create lock file to lock the serial dev */
-char *initializer = NULL; /* Script to initialize physical link */
-char *connect_script = NULL; /* Script to establish physical link */
-char *disconnect_script = NULL; /* Script to disestablish physical link */
-char *welcomer = NULL; /* Script to run after phys link estab. */
-char *ptycommand = NULL; /* Command to run on other side of pty */
-bool notty = 0; /* Stdin/out is not a tty */
-char *record_file = NULL; /* File to record chars sent/received */
-int max_data_rate; /* max bytes/sec through charshunt */
-bool sync_serial = 0; /* Device is synchronous serial device */
-char *pty_socket = NULL; /* Socket to connect to pty */
-int using_pty = 0; /* we're allocating a pty as the device */
-
-extern uid_t uid;
-extern int kill_link;
-
-/* XXX */
-extern int privopen; /* don't lock, open device as root */
-
-u_int32_t xmit_accm[8]; /* extended transmit ACCM */
-
-/* option descriptors */
-option_t tty_options[] = {
- /* device name must be first, or change connect_tty() below! */
- { "device name", o_wild, (void *) &setdevname,
- "Serial port device name",
- OPT_DEVNAM | OPT_PRIVFIX | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC,
- devnam},
-
- { "tty speed", o_wild, (void *) &setspeed,
- "Baud rate for serial port",
- OPT_PRIO | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC, speed_str },
-
- { "lock", o_bool, &lockflag,
- "Lock serial device with UUCP-style lock file", OPT_PRIO | 1 },
- { "nolock", o_bool, &lockflag,
- "Don't lock serial device", OPT_PRIOSUB | OPT_PRIV },
-
- { "init", o_string, &initializer,
- "A program to initialize the device", OPT_PRIO | OPT_PRIVFIX },
-
- { "connect", o_string, &connect_script,
- "A program to set up a connection", OPT_PRIO | OPT_PRIVFIX },
-
- { "disconnect", o_string, &disconnect_script,
- "Program to disconnect serial device", OPT_PRIO | OPT_PRIVFIX },
-
- { "welcome", o_string, &welcomer,
- "Script to welcome client", OPT_PRIO | OPT_PRIVFIX },
-
- { "pty", o_string, &ptycommand,
- "Script to run on pseudo-tty master side",
- OPT_PRIO | OPT_PRIVFIX | OPT_DEVNAM },
-
- { "notty", o_bool, &notty,
- "Input/output is not a tty", OPT_DEVNAM | 1 },
-
- { "socket", o_string, &pty_socket,
- "Send and receive over socket, arg is host:port",
- OPT_PRIO | OPT_DEVNAM },
-
- { "record", o_string, &record_file,
- "Record characters sent/received to file", OPT_PRIO },
-
- { "crtscts", o_int, &crtscts,
- "Set hardware (RTS/CTS) flow control",
- OPT_PRIO | OPT_NOARG | OPT_VAL(1) },
- { "cdtrcts", o_int, &crtscts,
- "Set alternate hardware (DTR/CTS) flow control",
- OPT_PRIOSUB | OPT_NOARG | OPT_VAL(2) },
- { "nocrtscts", o_int, &crtscts,
- "Disable hardware flow control",
- OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) },
- { "-crtscts", o_int, &crtscts,
- "Disable hardware flow control",
- OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
- { "nocdtrcts", o_int, &crtscts,
- "Disable hardware flow control",
- OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
- { "xonxoff", o_special_noarg, (void *)setxonxoff,
- "Set software (XON/XOFF) flow control", OPT_PRIOSUB },
-
- { "modem", o_bool, &modem,
- "Use modem control lines", OPT_PRIO | 1 },
- { "local", o_bool, &modem,
- "Don't use modem control lines", OPT_PRIOSUB | 0 },
-
- { "sync", o_bool, &sync_serial,
- "Use synchronous HDLC serial encoding", 1 },
-
- { "datarate", o_int, &max_data_rate,
- "Maximum data rate in bytes/sec (with pty, notty or record option)",
- OPT_PRIO },
-
- { "escape", o_special, (void *)setescape,
- "List of character codes to escape on transmission",
- OPT_A2PRINTER, (void *)printescape },
-
- { NULL }
-};
-
-
-struct channel tty_channel = {
- tty_options,
- &tty_process_extra_options,
- &tty_check_options,
- &connect_tty,
- &disconnect_tty,
- &tty_establish_ppp,
- &tty_disestablish_ppp,
- &tty_do_send_config,
- &tty_recv_config,
- &cleanup_tty,
- &tty_close_fds
-};
-
-/*
- * setspeed - Set the serial port baud rate.
- * If doit is 0, the call is to check whether this option is
- * potentially a speed value.
- */
-static int
-setspeed(arg, argv, doit)
- char *arg;
- char **argv;
- int doit;
-{
- char *ptr;
- int spd;
-
- spd = strtol(arg, &ptr, 0);
- if (ptr == arg || *ptr != 0 || spd == 0)
- return 0;
- if (doit) {
- inspeed = spd;
- slprintf(speed_str, sizeof(speed_str), "%d", spd);
- }
- return 1;
-}
-
-
-/*
- * setdevname - Set the device name.
- * If doit is 0, the call is to check whether this option is
- * potentially a device name.
- */
-static int
-setdevname(cp, argv, doit)
- char *cp;
- char **argv;
- int doit;
-{
- struct stat statbuf;
- char dev[MAXPATHLEN];
-
- if (*cp == 0)
- return 0;
-
- if (strncmp("/dev/", cp, 5) != 0) {
- strlcpy(dev, "/dev/", sizeof(dev));
- strlcat(dev, cp, sizeof(dev));
- cp = dev;
- }
-
- /*
- * Check if there is a character device by this name.
- */
- if (stat(cp, &statbuf) < 0) {
- if (!doit)
- return errno != ENOENT;
- option_error("Couldn't stat %s: %m", cp);
- return 0;
- }
- if (!S_ISCHR(statbuf.st_mode)) {
- if (doit)
- option_error("%s is not a character device", cp);
- return 0;
- }
-
- if (doit) {
- strlcpy(devnam, cp, sizeof(devnam));
- devstat = statbuf;
- default_device = 0;
- }
-
- return 1;
-}
-
-static int
-setxonxoff(argv)
- char **argv;
-{
- lcp_wantoptions[0].asyncmap |= 0x000A0000; /* escape ^S and ^Q */
- lcp_wantoptions[0].neg_asyncmap = 1;
-
- crtscts = -2;
- return 1;
-}
-
-/*
- * setescape - add chars to the set we escape on transmission.
- */
-static int
-setescape(argv)
- char **argv;
-{
- int n, ret;
- char *p, *endp;
-
- p = *argv;
- ret = 1;
- while (*p) {
- n = strtol(p, &endp, 16);
- if (p == endp) {
- option_error("escape parameter contains invalid hex number '%s'",
- p);
- return 0;
- }
- p = endp;
- if (n < 0 || n == 0x5E || n > 0xFF) {
- option_error("can't escape character 0x%x", n);
- ret = 0;
- } else
- xmit_accm[n >> 5] |= 1 << (n & 0x1F);
- while (*p == ',' || *p == ' ')
- ++p;
- }
- lcp_allowoptions[0].asyncmap = xmit_accm[0];
- return ret;
-}
-
-static void
-printescape(opt, printer, arg)
- option_t *opt;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int n;
- int first = 1;
-
- for (n = 0; n < 256; ++n) {
- if (n == 0x7d)
- n += 2; /* skip 7d, 7e */
- if (xmit_accm[n >> 5] & (1 << (n & 0x1f))) {
- if (!first)
- printer(arg, ",");
- else
- first = 0;
- printer(arg, "%x", n);
- }
- }
- if (first)
- printer(arg, "oops # nothing escaped");
-}
-
-/*
- * tty_init - do various tty-related initializations.
- */
-void tty_init()
-{
- add_notifier(&pidchange, maybe_relock, 0);
- the_channel = &tty_channel;
- xmit_accm[3] = 0x60000000;
-}
-
-/*
- * tty_process_extra_options - work out which tty device we are using
- * and read its options file.
- */
-void tty_process_extra_options()
-{
- using_pty = notty || ptycommand != NULL || pty_socket != NULL;
- if (using_pty)
- return;
- if (default_device) {
- char *p;
- if (!isatty(0) || (p = ttyname(0)) == NULL) {
- option_error("no device specified and stdin is not a tty");
- exit(EXIT_OPTION_ERROR);
- }
- strlcpy(devnam, p, sizeof(devnam));
- if (stat(devnam, &devstat) < 0)
- fatal("Couldn't stat default device %s: %m", devnam);
- }
-
-
- /*
- * Parse the tty options file.
- * The per-tty options file should not change
- * ptycommand, pty_socket, notty or devnam.
- * options_for_tty doesn't override options set on the command line,
- * except for some privileged options.
- */
- if (!options_for_tty())
- exit(EXIT_OPTION_ERROR);
-}
-
-/*
- * tty_check_options - do consistency checks on the options we were given.
- */
-void
-tty_check_options()
-{
- struct stat statbuf;
- int fdflags;
-
- if (demand && connect_script == 0) {
- option_error("connect script is required for demand-dialling\n");
- exit(EXIT_OPTION_ERROR);
- }
- /* default holdoff to 0 if no connect script has been given */
- if (connect_script == 0 && !holdoff_specified)
- holdoff = 0;
-
- if (using_pty) {
- if (!default_device) {
- option_error("%s option precludes specifying device name",
- notty? "notty": "pty");
- exit(EXIT_OPTION_ERROR);
- }
- if (ptycommand != NULL && notty) {
- option_error("pty option is incompatible with notty option");
- exit(EXIT_OPTION_ERROR);
- }
- if (pty_socket != NULL && (ptycommand != NULL || notty)) {
- option_error("socket option is incompatible with pty and notty");
- exit(EXIT_OPTION_ERROR);
- }
- default_device = notty;
- lockflag = 0;
- modem = 0;
- if (notty && log_to_fd <= 1)
- log_to_fd = -1;
- } else {
- /*
- * If the user has specified a device which is the same as
- * the one on stdin, pretend they didn't specify any.
- * If the device is already open read/write on stdin,
- * we assume we don't need to lock it, and we can open it
- * as root.
- */
- if (fstat(0, &statbuf) >= 0 && S_ISCHR(statbuf.st_mode)
- && statbuf.st_rdev == devstat.st_rdev) {
- default_device = 1;
- fdflags = fcntl(0, F_GETFL);
- if (fdflags != -1 && (fdflags & O_ACCMODE) == O_RDWR)
- privopen = 1;
- }
- }
- if (default_device)
- nodetach = 1;
-
- /*
- * Don't send log messages to the serial port, it tends to
- * confuse the peer. :-)
- */
- if (log_to_fd >= 0 && fstat(log_to_fd, &statbuf) >= 0
- && S_ISCHR(statbuf.st_mode) && statbuf.st_rdev == devstat.st_rdev)
- log_to_fd = -1;
-}
-
-/*
- * connect_tty - get the serial port ready to start doing PPP.
- * That is, open the serial port, set its speed and mode, and run
- * the connector and/or welcomer.
- */
-int connect_tty()
-{
- char *connector;
- int fdflags;
- struct stat statbuf;
- char numbuf[16];
-
- /*
- * Get a pty master/slave pair if the pty, notty, socket,
- * or record options were specified.
- */
- strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
- pty_master = -1;
- pty_slave = -1;
- real_ttyfd = -1;
- if (using_pty || record_file != NULL) {
- if (!get_pty(&pty_master, &pty_slave, ppp_devnam, uid)) {
- error("Couldn't allocate pseudo-tty");
- status = EXIT_FATAL_ERROR;
- return -1;
- }
- set_up_tty(pty_slave, 1);
- }
-
- /*
- * Lock the device if we've been asked to.
- */
- status = EXIT_LOCK_FAILED;
- if (lockflag && !privopen) {
- if (lock(devnam) < 0)
- return -1;
- locked = 1;
- }
-
- /*
- * Open the serial device and set it up to be the ppp interface.
- * First we open it in non-blocking mode so we can set the
- * various termios flags appropriately. If we aren't dialling
- * out and we want to use the modem lines, we reopen it later
- * in order to wait for the carrier detect signal from the modem.
- */
- hungup = 0;
- kill_link = 0;
- connector = doing_callback? callback_script: connect_script;
- if (devnam[0] != 0) {
- for (;;) {
- /* If the user specified the device name, become the
- user before opening it. */
- int err, prio;
-
- prio = privopen? OPRIO_ROOT: tty_options[0].priority;
- if (prio < OPRIO_ROOT)
- seteuid(uid);
- ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0);
- err = errno;
- if (prio < OPRIO_ROOT)
- seteuid(0);
- if (ttyfd >= 0)
- break;
- errno = err;
- if (err != EINTR) {
- error("Failed to open %s: %m", devnam);
- status = EXIT_OPEN_FAILED;
- }
- if (!persist || err != EINTR)
- return -1;
- }
- real_ttyfd = ttyfd;
- if ((fdflags = fcntl(ttyfd, F_GETFL)) == -1
- || fcntl(ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
- warn("Couldn't reset non-blocking mode on device: %m");
-
- /*
- * Do the equivalent of `mesg n' to stop broadcast messages.
- */
- if (fstat(ttyfd, &statbuf) < 0
- || fchmod(ttyfd, statbuf.st_mode & ~(S_IWGRP | S_IWOTH)) < 0) {
- warn("Couldn't restrict write permissions to %s: %m", devnam);
- } else
- tty_mode = statbuf.st_mode;
-
- /*
- * Set line speed, flow control, etc.
- * If we have a non-null connection or initializer script,
- * on most systems we set CLOCAL for now so that we can talk
- * to the modem before carrier comes up. But this has the
- * side effect that we might miss it if CD drops before we
- * get to clear CLOCAL below. On systems where we can talk
- * successfully to the modem with CLOCAL clear and CD down,
- * we could clear CLOCAL at this point.
- */
- set_up_tty(ttyfd, ((connector != NULL && connector[0] != 0)
- || initializer != NULL));
- }
-
- /*
- * If the pty, socket, notty and/or record option was specified,
- * start up the character shunt now.
- */
- status = EXIT_PTYCMD_FAILED;
- if (ptycommand != NULL) {
- if (record_file != NULL) {
- int ipipe[2], opipe[2], ok;
-
- if (pipe(ipipe) < 0 || pipe(opipe) < 0)
- fatal("Couldn't create pipes for record option: %m");
- ok = device_script(ptycommand, opipe[0], ipipe[1], 1) == 0
- && start_charshunt(ipipe[0], opipe[1]);
- close(ipipe[0]);
- close(ipipe[1]);
- close(opipe[0]);
- close(opipe[1]);
- if (!ok)
- return -1;
- } else {
- if (device_script(ptycommand, pty_master, pty_master, 1) < 0)
- return -1;
- ttyfd = pty_slave;
- close(pty_master);
- pty_master = -1;
- }
- } else if (pty_socket != NULL) {
- int fd = open_socket(pty_socket);
- if (fd < 0)
- return -1;
- if (!start_charshunt(fd, fd))
- return -1;
- } else if (notty) {
- if (!start_charshunt(0, 1))
- return -1;
- } else if (record_file != NULL) {
- if (!start_charshunt(ttyfd, ttyfd))
- return -1;
- }
-
- /* run connection script */
- if ((connector && connector[0]) || initializer) {
- if (real_ttyfd != -1) {
- /* XXX do this if doing_callback == CALLBACK_DIALIN? */
- if (!default_device && modem) {
- setdtr(real_ttyfd, 0); /* in case modem is off hook */
- sleep(1);
- setdtr(real_ttyfd, 1);
- }
- }
-
- if (initializer && initializer[0]) {
- if (device_script(initializer, ttyfd, ttyfd, 0) < 0) {
- error("Initializer script failed");
- status = EXIT_INIT_FAILED;
- return -1;
- }
- if (kill_link) {
- disconnect_tty();
- return -1;
- }
- info("Serial port initialized.");
- }
-
- if (connector && connector[0]) {
- if (device_script(connector, ttyfd, ttyfd, 0) < 0) {
- error("Connect script failed");
- status = EXIT_CONNECT_FAILED;
- return -1;
- }
- if (kill_link) {
- disconnect_tty();
- return -1;
- }
- info("Serial connection established.");
- }
-
- /* set line speed, flow control, etc.;
- clear CLOCAL if modem option */
- if (real_ttyfd != -1)
- set_up_tty(real_ttyfd, 0);
-
- if (doing_callback == CALLBACK_DIALIN)
- connector = NULL;
- }
-
- /* reopen tty if necessary to wait for carrier */
- if (connector == NULL && modem && devnam[0] != 0) {
- int i;
- for (;;) {
- if ((i = open(devnam, O_RDWR)) >= 0)
- break;
- if (errno != EINTR) {
- error("Failed to reopen %s: %m", devnam);
- status = EXIT_OPEN_FAILED;
- }
- if (!persist || errno != EINTR || hungup || kill_link)
- return -1;
- }
- close(i);
- }
-
- slprintf(numbuf, sizeof(numbuf), "%d", baud_rate);
- script_setenv("SPEED", numbuf, 0);
-
- /* run welcome script, if any */
- if (welcomer && welcomer[0]) {
- if (device_script(welcomer, ttyfd, ttyfd, 0) < 0)
- warn("Welcome script failed");
- }
-
- /*
- * If we are initiating this connection, wait for a short
- * time for something from the peer. This can avoid bouncing
- * our packets off his tty before he has it set up.
- */
- if (connector != NULL || ptycommand != NULL)
- listen_time = connect_delay;
-
- return ttyfd;
-}
-
-
-void disconnect_tty()
-{
- if (disconnect_script == NULL || hungup)
- return;
- if (real_ttyfd >= 0)
- set_up_tty(real_ttyfd, 1);
- if (device_script(disconnect_script, ttyfd, ttyfd, 0) < 0) {
- warn("disconnect script failed");
- } else {
- info("Serial link disconnected.");
- }
-}
-
-void tty_close_fds()
-{
- if (pty_master >= 0)
- close(pty_master);
- if (pty_slave >= 0)
- close(pty_slave);
- if (real_ttyfd >= 0) {
- close(real_ttyfd);
- real_ttyfd = -1;
- }
- /* N.B. ttyfd will == either pty_slave or real_ttyfd */
-}
-
-void cleanup_tty()
-{
- if (real_ttyfd >= 0)
- finish_tty();
- tty_close_fds();
- if (locked) {
- unlock();
- locked = 0;
- }
-}
-
-/*
- * tty_do_send_config - set transmit-side PPP configuration.
- * We set the extended transmit ACCM here as well.
- */
-void
-tty_do_send_config(mtu, accm, pcomp, accomp)
- int mtu;
- u_int32_t accm;
- int pcomp, accomp;
-{
- tty_set_xaccm(xmit_accm);
- tty_send_config(mtu, accm, pcomp, accomp);
-}
-
-/*
- * finish_tty - restore the terminal device to its original settings
- */
-static void
-finish_tty()
-{
- /* drop dtr to hang up */
- if (!default_device && modem) {
- setdtr(real_ttyfd, 0);
- /*
- * This sleep is in case the serial port has CLOCAL set by default,
- * and consequently will reassert DTR when we close the device.
- */
- sleep(1);
- }
-
- restore_tty(real_ttyfd);
-
- if (tty_mode != (mode_t) -1) {
- if (fchmod(real_ttyfd, tty_mode) != 0) {
- /* XXX if devnam is a symlink, this will change the link */
- chmod(devnam, tty_mode);
- }
- }
-
- close(real_ttyfd);
- real_ttyfd = -1;
-}
-
-/*
- * maybe_relock - our PID has changed, maybe update the lock file.
- */
-static void
-maybe_relock(arg, pid)
- void *arg;
- int pid;
-{
- if (locked)
- relock(pid);
-}
-
-/*
- * open_socket - establish a stream socket connection to the nominated
- * host and port.
- */
-static int
-open_socket(dest)
- char *dest;
-{
- char *sep, *endp = NULL;
- int sock, port = -1;
- u_int32_t host;
- struct hostent *hent;
- struct sockaddr_in sad;
-
- /* parse host:port and resolve host to an IP address */
- sep = strchr(dest, ':');
- if (sep != NULL)
- port = strtol(sep+1, &endp, 10);
- if (port < 0 || endp == sep+1 || sep == dest) {
- error("Can't parse host:port for socket destination");
- return -1;
- }
- *sep = 0;
- host = inet_addr(dest);
- if (host == (u_int32_t) -1) {
- hent = gethostbyname(dest);
- if (hent == NULL) {
- error("%s: unknown host in socket option", dest);
- *sep = ':';
- return -1;
- }
- host = *(u_int32_t *)(hent->h_addr_list[0]);
- }
- *sep = ':';
-
- /* get a socket and connect it to the other end */
- sock = socket(PF_INET, SOCK_STREAM, 0);
- if (sock < 0) {
- error("Can't create socket: %m");
- return -1;
- }
- memset(&sad, 0, sizeof(sad));
- sad.sin_family = AF_INET;
- sad.sin_port = htons(port);
- sad.sin_addr.s_addr = host;
- if (connect(sock, (struct sockaddr *)&sad, sizeof(sad)) < 0) {
- error("Can't connect to %s: %m", dest);
- close(sock);
- return -1;
- }
-
- return sock;
-}
-
-
-/*
- * start_charshunt - create a child process to run the character shunt.
- */
-static int
-start_charshunt(ifd, ofd)
- int ifd, ofd;
-{
- int cpid;
-
- cpid = fork();
- if (cpid == -1) {
- error("Can't fork process for character shunt: %m");
- return 0;
- }
- if (cpid == 0) {
- /* child */
- close(pty_slave);
- setuid(uid);
- if (getuid() != uid)
- fatal("setuid failed");
- setgid(getgid());
- if (!nodetach)
- log_to_fd = -1;
- charshunt(ifd, ofd, record_file);
- exit(0);
- }
- charshunt_pid = cpid;
- add_notifier(&sigreceived, stop_charshunt, 0);
- close(pty_master);
- pty_master = -1;
- ttyfd = pty_slave;
- record_child(cpid, "pppd (charshunt)", charshunt_done, NULL);
- return 1;
-}
-
-static void
-charshunt_done(arg)
- void *arg;
-{
- charshunt_pid = 0;
-}
-
-static void
-stop_charshunt(arg, sig)
- void *arg;
- int sig;
-{
- if (charshunt_pid)
- kill(charshunt_pid, (sig == SIGINT? sig: SIGTERM));
-}
-
-/*
- * charshunt - the character shunt, which passes characters between
- * the pty master side and the serial port (or stdin/stdout).
- * This runs as the user (not as root).
- * (We assume ofd >= ifd which is true the way this gets called. :-).
- */
-static void
-charshunt(ifd, ofd, record_file)
- int ifd, ofd;
- char *record_file;
-{
- int n, nfds;
- fd_set ready, writey;
- u_char *ibufp, *obufp;
- int nibuf, nobuf;
- int flags;
- int pty_readable, stdin_readable;
- struct timeval lasttime;
- FILE *recordf = NULL;
- int ilevel, olevel, max_level;
- struct timeval levelt, tout, *top;
- extern u_char inpacket_buf[];
-
- /*
- * Reset signal handlers.
- */
- signal(SIGHUP, SIG_IGN); /* Hangup */
- signal(SIGINT, SIG_DFL); /* Interrupt */
- signal(SIGTERM, SIG_DFL); /* Terminate */
- signal(SIGCHLD, SIG_DFL);
- signal(SIGUSR1, SIG_DFL);
- signal(SIGUSR2, SIG_DFL);
- signal(SIGABRT, SIG_DFL);
- signal(SIGALRM, SIG_DFL);
- signal(SIGFPE, SIG_DFL);
- signal(SIGILL, SIG_DFL);
- signal(SIGPIPE, SIG_DFL);
- signal(SIGQUIT, SIG_DFL);
- signal(SIGSEGV, SIG_DFL);
-#ifdef SIGBUS
- signal(SIGBUS, SIG_DFL);
-#endif
-#ifdef SIGEMT
- signal(SIGEMT, SIG_DFL);
-#endif
-#ifdef SIGPOLL
- signal(SIGPOLL, SIG_DFL);
-#endif
-#ifdef SIGPROF
- signal(SIGPROF, SIG_DFL);
-#endif
-#ifdef SIGSYS
- signal(SIGSYS, SIG_DFL);
-#endif
-#ifdef SIGTRAP
- signal(SIGTRAP, SIG_DFL);
-#endif
-#ifdef SIGVTALRM
- signal(SIGVTALRM, SIG_DFL);
-#endif
-#ifdef SIGXCPU
- signal(SIGXCPU, SIG_DFL);
-#endif
-#ifdef SIGXFSZ
- signal(SIGXFSZ, SIG_DFL);
-#endif
-
- /*
- * Open the record file if required.
- */
- if (record_file != NULL) {
- recordf = fopen(record_file, "a");
- if (recordf == NULL)
- error("Couldn't create record file %s: %m", record_file);
- }
-
- /* set all the fds to non-blocking mode */
- flags = fcntl(pty_master, F_GETFL);
- if (flags == -1
- || fcntl(pty_master, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set pty master to nonblock: %m");
- flags = fcntl(ifd, F_GETFL);
- if (flags == -1
- || fcntl(ifd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set %s to nonblock: %m", (ifd==0? "stdin": "tty"));
- if (ofd != ifd) {
- flags = fcntl(ofd, F_GETFL);
- if (flags == -1
- || fcntl(ofd, F_SETFL, flags | O_NONBLOCK) == -1)
- warn("couldn't set stdout to nonblock: %m");
- }
-
- nibuf = nobuf = 0;
- ibufp = obufp = NULL;
- pty_readable = stdin_readable = 1;
-
- ilevel = olevel = 0;
- gettimeofday(&levelt, NULL);
- if (max_data_rate) {
- max_level = max_data_rate / 10;
- if (max_level < 100)
- max_level = 100;
- } else
- max_level = PPP_MRU + PPP_HDRLEN + 1;
-
- nfds = (ofd > pty_master? ofd: pty_master) + 1;
- if (recordf != NULL) {
- gettimeofday(&lasttime, NULL);
- putc(7, recordf); /* put start marker */
- putc(lasttime.tv_sec >> 24, recordf);
- putc(lasttime.tv_sec >> 16, recordf);
- putc(lasttime.tv_sec >> 8, recordf);
- putc(lasttime.tv_sec, recordf);
- lasttime.tv_usec = 0;
- }
-
- while (nibuf != 0 || nobuf != 0 || pty_readable || stdin_readable) {
- top = 0;
- tout.tv_sec = 0;
- tout.tv_usec = 10000;
- FD_ZERO(&ready);
- FD_ZERO(&writey);
- if (nibuf != 0) {
- if (ilevel >= max_level)
- top = &tout;
- else
- FD_SET(pty_master, &writey);
- } else if (stdin_readable)
- FD_SET(ifd, &ready);
- if (nobuf != 0) {
- if (olevel >= max_level)
- top = &tout;
- else
- FD_SET(ofd, &writey);
- } else if (pty_readable)
- FD_SET(pty_master, &ready);
- if (select(nfds, &ready, &writey, NULL, top) < 0) {
- if (errno != EINTR)
- fatal("select");
- continue;
- }
- if (max_data_rate) {
- double dt;
- int nbt;
- struct timeval now;
-
- gettimeofday(&now, NULL);
- dt = (now.tv_sec - levelt.tv_sec
- + (now.tv_usec - levelt.tv_usec) / 1e6);
- nbt = (int)(dt * max_data_rate);
- ilevel = (nbt < 0 || nbt > ilevel)? 0: ilevel - nbt;
- olevel = (nbt < 0 || nbt > olevel)? 0: olevel - nbt;
- levelt = now;
- } else
- ilevel = olevel = 0;
- if (FD_ISSET(ifd, &ready)) {
- ibufp = inpacket_buf;
- nibuf = read(ifd, ibufp, PPP_MRU + PPP_HDRLEN);
- if (nibuf < 0 && errno == EIO)
- nibuf = 0;
- if (nibuf < 0) {
- if (!(errno == EINTR || errno == EAGAIN)) {
- error("Error reading standard input: %m");
- break;
- }
- nibuf = 0;
- } else if (nibuf == 0) {
- /* end of file from stdin */
- stdin_readable = 0;
- /* do a 0-length write, hopefully this will generate
- an EOF (hangup) on the slave side. */
- write(pty_master, inpacket_buf, 0);
- if (recordf)
- if (!record_write(recordf, 4, NULL, 0, &lasttime))
- recordf = NULL;
- } else {
- FD_SET(pty_master, &writey);
- if (recordf)
- if (!record_write(recordf, 2, ibufp, nibuf, &lasttime))
- recordf = NULL;
- }
- }
- if (FD_ISSET(pty_master, &ready)) {
- obufp = outpacket_buf;
- nobuf = read(pty_master, obufp, PPP_MRU + PPP_HDRLEN);
- if (nobuf < 0 && errno == EIO)
- nobuf = 0;
- if (nobuf < 0) {
- if (!(errno == EINTR || errno == EAGAIN)) {
- error("Error reading pseudo-tty master: %m");
- break;
- }
- nobuf = 0;
- } else if (nobuf == 0) {
- /* end of file from the pty - slave side has closed */
- pty_readable = 0;
- stdin_readable = 0; /* pty is not writable now */
- nibuf = 0;
- close(ofd);
- if (recordf)
- if (!record_write(recordf, 3, NULL, 0, &lasttime))
- recordf = NULL;
- } else {
- FD_SET(ofd, &writey);
- if (recordf)
- if (!record_write(recordf, 1, obufp, nobuf, &lasttime))
- recordf = NULL;
- }
- }
- if (FD_ISSET(ofd, &writey)) {
- n = nobuf;
- if (olevel + n > max_level)
- n = max_level - olevel;
- n = write(ofd, obufp, n);
- if (n < 0) {
- if (errno == EIO) {
- pty_readable = 0;
- nobuf = 0;
- } else if (errno != EAGAIN && errno != EINTR) {
- error("Error writing standard output: %m");
- break;
- }
- } else {
- obufp += n;
- nobuf -= n;
- olevel += n;
- }
- }
- if (FD_ISSET(pty_master, &writey)) {
- n = nibuf;
- if (ilevel + n > max_level)
- n = max_level - ilevel;
- n = write(pty_master, ibufp, n);
- if (n < 0) {
- if (errno == EIO) {
- stdin_readable = 0;
- nibuf = 0;
- } else if (errno != EAGAIN && errno != EINTR) {
- error("Error writing pseudo-tty master: %m");
- break;
- }
- } else {
- ibufp += n;
- nibuf -= n;
- ilevel += n;
- }
- }
- }
- exit(0);
-}
-
-static int
-record_write(f, code, buf, nb, tp)
- FILE *f;
- int code;
- u_char *buf;
- int nb;
- struct timeval *tp;
-{
- struct timeval now;
- int diff;
-
- gettimeofday(&now, NULL);
- now.tv_usec /= 100000; /* actually 1/10 s, not usec now */
- diff = (now.tv_sec - tp->tv_sec) * 10 + (now.tv_usec - tp->tv_usec);
- if (diff > 0) {
- if (diff > 255) {
- putc(5, f);
- putc(diff >> 24, f);
- putc(diff >> 16, f);
- putc(diff >> 8, f);
- putc(diff, f);
- } else {
- putc(6, f);
- putc(diff, f);
- }
- *tp = now;
- }
- putc(code, f);
- if (buf != NULL) {
- putc(nb >> 8, f);
- putc(nb, f);
- fwrite(buf, nb, 1, f);
- }
- fflush(f);
- if (ferror(f)) {
- error("Error writing record file: %m");
- return 0;
- }
- return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/upap.c b/mdk-stage1/ppp/pppd/upap.c
deleted file mode 100644
index bd569fb74..000000000
--- a/mdk-stage1/ppp/pppd/upap.c
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * upap.c - User/Password Authentication Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-
-#include "pppd.h"
-#include "upap.h"
-
-static const char rcsid[] = RCSID;
-
-static bool hide_password = 1;
-
-/*
- * Command-line options.
- */
-static option_t pap_option_list[] = {
- { "hide-password", o_bool, &hide_password,
- "Don't output passwords to log", OPT_PRIO | 1 },
- { "show-password", o_bool, &hide_password,
- "Show password string in debug log messages", OPT_PRIOSUB | 0 },
-
- { "pap-restart", o_int, &upap[0].us_timeouttime,
- "Set retransmit timeout for PAP", OPT_PRIO },
- { "pap-max-authreq", o_int, &upap[0].us_maxtransmits,
- "Set max number of transmissions for auth-reqs", OPT_PRIO },
- { "pap-timeout", o_int, &upap[0].us_reqtimeout,
- "Set time limit for peer PAP authentication", OPT_PRIO },
-
- { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-static void upap_init __P((int));
-static void upap_lowerup __P((int));
-static void upap_lowerdown __P((int));
-static void upap_input __P((int, u_char *, int));
-static void upap_protrej __P((int));
-static int upap_printpkt __P((u_char *, int,
- void (*) __P((void *, char *, ...)), void *));
-
-struct protent pap_protent = {
- PPP_PAP,
- upap_init,
- upap_input,
- upap_protrej,
- upap_lowerup,
- upap_lowerdown,
- NULL,
- NULL,
- upap_printpkt,
- NULL,
- 1,
- "PAP",
- NULL,
- pap_option_list,
- NULL,
- NULL,
- NULL
-};
-
-upap_state upap[NUM_PPP]; /* UPAP state; one for each unit */
-
-static void upap_timeout __P((void *));
-static void upap_reqtimeout __P((void *));
-static void upap_rauthreq __P((upap_state *, u_char *, int, int));
-static void upap_rauthack __P((upap_state *, u_char *, int, int));
-static void upap_rauthnak __P((upap_state *, u_char *, int, int));
-static void upap_sauthreq __P((upap_state *));
-static void upap_sresp __P((upap_state *, int, int, char *, int));
-
-
-/*
- * upap_init - Initialize a UPAP unit.
- */
-static void
-upap_init(unit)
- int unit;
-{
- upap_state *u = &upap[unit];
-
- u->us_unit = unit;
- u->us_user = NULL;
- u->us_userlen = 0;
- u->us_passwd = NULL;
- u->us_passwdlen = 0;
- u->us_clientstate = UPAPCS_INITIAL;
- u->us_serverstate = UPAPSS_INITIAL;
- u->us_id = 0;
- u->us_timeouttime = UPAP_DEFTIMEOUT;
- u->us_maxtransmits = 10;
- u->us_reqtimeout = UPAP_DEFREQTIME;
-}
-
-
-/*
- * upap_authwithpeer - Authenticate us with our peer (start client).
- *
- * Set new state and send authenticate's.
- */
-void
-upap_authwithpeer(unit, user, password)
- int unit;
- char *user, *password;
-{
- upap_state *u = &upap[unit];
-
- /* Save the username and password we're given */
- u->us_user = user;
- u->us_userlen = strlen(user);
- u->us_passwd = password;
- u->us_passwdlen = strlen(password);
- u->us_transmits = 0;
-
- /* Lower layer up yet? */
- if (u->us_clientstate == UPAPCS_INITIAL ||
- u->us_clientstate == UPAPCS_PENDING) {
- u->us_clientstate = UPAPCS_PENDING;
- return;
- }
-
- upap_sauthreq(u); /* Start protocol */
-}
-
-
-/*
- * upap_authpeer - Authenticate our peer (start server).
- *
- * Set new state.
- */
-void
-upap_authpeer(unit)
- int unit;
-{
- upap_state *u = &upap[unit];
-
- /* Lower layer up yet? */
- if (u->us_serverstate == UPAPSS_INITIAL ||
- u->us_serverstate == UPAPSS_PENDING) {
- u->us_serverstate = UPAPSS_PENDING;
- return;
- }
-
- u->us_serverstate = UPAPSS_LISTEN;
- if (u->us_reqtimeout > 0)
- TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout);
-}
-
-
-/*
- * upap_timeout - Retransmission timer for sending auth-reqs expired.
- */
-static void
-upap_timeout(arg)
- void *arg;
-{
- upap_state *u = (upap_state *) arg;
-
- if (u->us_clientstate != UPAPCS_AUTHREQ)
- return;
-
- if (u->us_transmits >= u->us_maxtransmits) {
- /* give up in disgust */
- error("No response to PAP authenticate-requests");
- u->us_clientstate = UPAPCS_BADAUTH;
- auth_withpeer_fail(u->us_unit, PPP_PAP);
- return;
- }
-
- upap_sauthreq(u); /* Send Authenticate-Request */
-}
-
-
-/*
- * upap_reqtimeout - Give up waiting for the peer to send an auth-req.
- */
-static void
-upap_reqtimeout(arg)
- void *arg;
-{
- upap_state *u = (upap_state *) arg;
-
- if (u->us_serverstate != UPAPSS_LISTEN)
- return; /* huh?? */
-
- auth_peer_fail(u->us_unit, PPP_PAP);
- u->us_serverstate = UPAPSS_BADAUTH;
-}
-
-
-/*
- * upap_lowerup - The lower layer is up.
- *
- * Start authenticating if pending.
- */
-static void
-upap_lowerup(unit)
- int unit;
-{
- upap_state *u = &upap[unit];
-
- if (u->us_clientstate == UPAPCS_INITIAL)
- u->us_clientstate = UPAPCS_CLOSED;
- else if (u->us_clientstate == UPAPCS_PENDING) {
- upap_sauthreq(u); /* send an auth-request */
- }
-
- if (u->us_serverstate == UPAPSS_INITIAL)
- u->us_serverstate = UPAPSS_CLOSED;
- else if (u->us_serverstate == UPAPSS_PENDING) {
- u->us_serverstate = UPAPSS_LISTEN;
- if (u->us_reqtimeout > 0)
- TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout);
- }
-}
-
-
-/*
- * upap_lowerdown - The lower layer is down.
- *
- * Cancel all timeouts.
- */
-static void
-upap_lowerdown(unit)
- int unit;
-{
- upap_state *u = &upap[unit];
-
- if (u->us_clientstate == UPAPCS_AUTHREQ) /* Timeout pending? */
- UNTIMEOUT(upap_timeout, u); /* Cancel timeout */
- if (u->us_serverstate == UPAPSS_LISTEN && u->us_reqtimeout > 0)
- UNTIMEOUT(upap_reqtimeout, u);
-
- u->us_clientstate = UPAPCS_INITIAL;
- u->us_serverstate = UPAPSS_INITIAL;
-}
-
-
-/*
- * upap_protrej - Peer doesn't speak this protocol.
- *
- * This shouldn't happen. In any case, pretend lower layer went down.
- */
-static void
-upap_protrej(unit)
- int unit;
-{
- upap_state *u = &upap[unit];
-
- if (u->us_clientstate == UPAPCS_AUTHREQ) {
- error("PAP authentication failed due to protocol-reject");
- auth_withpeer_fail(unit, PPP_PAP);
- }
- if (u->us_serverstate == UPAPSS_LISTEN) {
- error("PAP authentication of peer failed (protocol-reject)");
- auth_peer_fail(unit, PPP_PAP);
- }
- upap_lowerdown(unit);
-}
-
-
-/*
- * upap_input - Input UPAP packet.
- */
-static void
-upap_input(unit, inpacket, l)
- int unit;
- u_char *inpacket;
- int l;
-{
- upap_state *u = &upap[unit];
- u_char *inp;
- u_char code, id;
- int len;
-
- /*
- * Parse header (code, id and length).
- * If packet too short, drop it.
- */
- inp = inpacket;
- if (l < UPAP_HEADERLEN) {
- UPAPDEBUG(("pap_input: rcvd short header."));
- return;
- }
- GETCHAR(code, inp);
- GETCHAR(id, inp);
- GETSHORT(len, inp);
- if (len < UPAP_HEADERLEN) {
- UPAPDEBUG(("pap_input: rcvd illegal length."));
- return;
- }
- if (len > l) {
- UPAPDEBUG(("pap_input: rcvd short packet."));
- return;
- }
- len -= UPAP_HEADERLEN;
-
- /*
- * Action depends on code.
- */
- switch (code) {
- case UPAP_AUTHREQ:
- upap_rauthreq(u, inp, id, len);
- break;
-
- case UPAP_AUTHACK:
- upap_rauthack(u, inp, id, len);
- break;
-
- case UPAP_AUTHNAK:
- upap_rauthnak(u, inp, id, len);
- break;
-
- default: /* XXX Need code reject */
- break;
- }
-}
-
-
-/*
- * upap_rauth - Receive Authenticate.
- */
-static void
-upap_rauthreq(u, inp, id, len)
- upap_state *u;
- u_char *inp;
- int id;
- int len;
-{
- u_char ruserlen, rpasswdlen;
- char *ruser, *rpasswd;
- int retcode;
- char *msg;
- int msglen;
-
- if (u->us_serverstate < UPAPSS_LISTEN)
- return;
-
- /*
- * If we receive a duplicate authenticate-request, we are
- * supposed to return the same status as for the first request.
- */
- if (u->us_serverstate == UPAPSS_OPEN) {
- upap_sresp(u, UPAP_AUTHACK, id, "", 0); /* return auth-ack */
- return;
- }
- if (u->us_serverstate == UPAPSS_BADAUTH) {
- upap_sresp(u, UPAP_AUTHNAK, id, "", 0); /* return auth-nak */
- return;
- }
-
- /*
- * Parse user/passwd.
- */
- if (len < 1) {
- UPAPDEBUG(("pap_rauth: rcvd short packet."));
- return;
- }
- GETCHAR(ruserlen, inp);
- len -= sizeof (u_char) + ruserlen + sizeof (u_char);
- if (len < 0) {
- UPAPDEBUG(("pap_rauth: rcvd short packet."));
- return;
- }
- ruser = (char *) inp;
- INCPTR(ruserlen, inp);
- GETCHAR(rpasswdlen, inp);
- if (len < rpasswdlen) {
- UPAPDEBUG(("pap_rauth: rcvd short packet."));
- return;
- }
- rpasswd = (char *) inp;
-
- /*
- * Check the username and password given.
- */
- retcode = check_passwd(u->us_unit, ruser, ruserlen, rpasswd,
- rpasswdlen, &msg);
- BZERO(rpasswd, rpasswdlen);
- msglen = strlen(msg);
- if (msglen > 255)
- msglen = 255;
-
- upap_sresp(u, retcode, id, msg, msglen);
-
- if (retcode == UPAP_AUTHACK) {
- u->us_serverstate = UPAPSS_OPEN;
- auth_peer_success(u->us_unit, PPP_PAP, ruser, ruserlen);
- } else {
- u->us_serverstate = UPAPSS_BADAUTH;
- auth_peer_fail(u->us_unit, PPP_PAP);
- }
-
- if (u->us_reqtimeout > 0)
- UNTIMEOUT(upap_reqtimeout, u);
-}
-
-
-/*
- * upap_rauthack - Receive Authenticate-Ack.
- */
-static void
-upap_rauthack(u, inp, id, len)
- upap_state *u;
- u_char *inp;
- int id;
- int len;
-{
- u_char msglen;
- char *msg;
-
- if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */
- return;
-
- /*
- * Parse message.
- */
- if (len < 1) {
- UPAPDEBUG(("pap_rauthack: ignoring missing msg-length."));
- } else {
- GETCHAR(msglen, inp);
- if (msglen > 0) {
- len -= sizeof (u_char);
- if (len < msglen) {
- UPAPDEBUG(("pap_rauthack: rcvd short packet."));
- return;
- }
- msg = (char *) inp;
- PRINTMSG(msg, msglen);
- }
- }
-
- u->us_clientstate = UPAPCS_OPEN;
-
- auth_withpeer_success(u->us_unit, PPP_PAP);
-}
-
-
-/*
- * upap_rauthnak - Receive Authenticate-Nakk.
- */
-static void
-upap_rauthnak(u, inp, id, len)
- upap_state *u;
- u_char *inp;
- int id;
- int len;
-{
- u_char msglen;
- char *msg;
-
- if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */
- return;
-
- /*
- * Parse message.
- */
- if (len < 1) {
- UPAPDEBUG(("pap_rauthnak: ignoring missing msg-length."));
- } else {
- GETCHAR(msglen, inp);
- if (msglen > 0) {
- len -= sizeof (u_char);
- if (len < msglen) {
- UPAPDEBUG(("pap_rauthnak: rcvd short packet."));
- return;
- }
- msg = (char *) inp;
- PRINTMSG(msg, msglen);
- }
- }
-
- u->us_clientstate = UPAPCS_BADAUTH;
-
- error("PAP authentication failed");
- auth_withpeer_fail(u->us_unit, PPP_PAP);
-}
-
-
-/*
- * upap_sauthreq - Send an Authenticate-Request.
- */
-static void
-upap_sauthreq(u)
- upap_state *u;
-{
- u_char *outp;
- int outlen;
-
- outlen = UPAP_HEADERLEN + 2 * sizeof (u_char) +
- u->us_userlen + u->us_passwdlen;
- outp = outpacket_buf;
-
- MAKEHEADER(outp, PPP_PAP);
-
- PUTCHAR(UPAP_AUTHREQ, outp);
- PUTCHAR(++u->us_id, outp);
- PUTSHORT(outlen, outp);
- PUTCHAR(u->us_userlen, outp);
- BCOPY(u->us_user, outp, u->us_userlen);
- INCPTR(u->us_userlen, outp);
- PUTCHAR(u->us_passwdlen, outp);
- BCOPY(u->us_passwd, outp, u->us_passwdlen);
-
- output(u->us_unit, outpacket_buf, outlen + PPP_HDRLEN);
-
- TIMEOUT(upap_timeout, u, u->us_timeouttime);
- ++u->us_transmits;
- u->us_clientstate = UPAPCS_AUTHREQ;
-}
-
-
-/*
- * upap_sresp - Send a response (ack or nak).
- */
-static void
-upap_sresp(u, code, id, msg, msglen)
- upap_state *u;
- u_char code, id;
- char *msg;
- int msglen;
-{
- u_char *outp;
- int outlen;
-
- outlen = UPAP_HEADERLEN + sizeof (u_char) + msglen;
- outp = outpacket_buf;
- MAKEHEADER(outp, PPP_PAP);
-
- PUTCHAR(code, outp);
- PUTCHAR(id, outp);
- PUTSHORT(outlen, outp);
- PUTCHAR(msglen, outp);
- BCOPY(msg, outp, msglen);
- output(u->us_unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
-
-/*
- * upap_printpkt - print the contents of a PAP packet.
- */
-static char *upap_codenames[] = {
- "AuthReq", "AuthAck", "AuthNak"
-};
-
-static int
-upap_printpkt(p, plen, printer, arg)
- u_char *p;
- int plen;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int code, id, len;
- int mlen, ulen, wlen;
- char *user, *pwd, *msg;
- u_char *pstart;
-
- if (plen < UPAP_HEADERLEN)
- return 0;
- pstart = p;
- GETCHAR(code, p);
- GETCHAR(id, p);
- GETSHORT(len, p);
- if (len < UPAP_HEADERLEN || len > plen)
- return 0;
-
- if (code >= 1 && code <= sizeof(upap_codenames) / sizeof(char *))
- printer(arg, " %s", upap_codenames[code-1]);
- else
- printer(arg, " code=0x%x", code);
- printer(arg, " id=0x%x", id);
- len -= UPAP_HEADERLEN;
- switch (code) {
- case UPAP_AUTHREQ:
- if (len < 1)
- break;
- ulen = p[0];
- if (len < ulen + 2)
- break;
- wlen = p[ulen + 1];
- if (len < ulen + wlen + 2)
- break;
- user = (char *) (p + 1);
- pwd = (char *) (p + ulen + 2);
- p += ulen + wlen + 2;
- len -= ulen + wlen + 2;
- printer(arg, " user=");
- print_string(user, ulen, printer, arg);
- printer(arg, " password=");
- if (!hide_password)
- print_string(pwd, wlen, printer, arg);
- else
- printer(arg, "<hidden>");
- break;
- case UPAP_AUTHACK:
- case UPAP_AUTHNAK:
- if (len < 1)
- break;
- mlen = p[0];
- if (len < mlen + 1)
- break;
- msg = (char *) (p + 1);
- p += mlen + 1;
- len -= mlen + 1;
- printer(arg, " ");
- print_string(msg, mlen, printer, arg);
- break;
- }
-
- /* print the rest of the bytes in the packet */
- for (; len > 0; --len) {
- GETCHAR(code, p);
- printer(arg, " %.2x", code);
- }
-
- return p - pstart;
-}
diff --git a/mdk-stage1/ppp/pppd/upap.h b/mdk-stage1/ppp/pppd/upap.h
deleted file mode 100644
index 42d6f4f0f..000000000
--- a/mdk-stage1/ppp/pppd/upap.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * upap.h - User/Password Authentication Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Packet header = Code, id, length.
- */
-#define UPAP_HEADERLEN 4
-
-
-/*
- * UPAP codes.
- */
-#define UPAP_AUTHREQ 1 /* Authenticate-Request */
-#define UPAP_AUTHACK 2 /* Authenticate-Ack */
-#define UPAP_AUTHNAK 3 /* Authenticate-Nak */
-
-
-/*
- * Each interface is described by upap structure.
- */
-typedef struct upap_state {
- int us_unit; /* Interface unit number */
- char *us_user; /* User */
- int us_userlen; /* User length */
- char *us_passwd; /* Password */
- int us_passwdlen; /* Password length */
- int us_clientstate; /* Client state */
- int us_serverstate; /* Server state */
- u_char us_id; /* Current id */
- int us_timeouttime; /* Timeout (seconds) for auth-req retrans. */
- int us_transmits; /* Number of auth-reqs sent */
- int us_maxtransmits; /* Maximum number of auth-reqs to send */
- int us_reqtimeout; /* Time to wait for auth-req from peer */
-} upap_state;
-
-
-/*
- * Client states.
- */
-#define UPAPCS_INITIAL 0 /* Connection down */
-#define UPAPCS_CLOSED 1 /* Connection up, haven't requested auth */
-#define UPAPCS_PENDING 2 /* Connection down, have requested auth */
-#define UPAPCS_AUTHREQ 3 /* We've sent an Authenticate-Request */
-#define UPAPCS_OPEN 4 /* We've received an Ack */
-#define UPAPCS_BADAUTH 5 /* We've received a Nak */
-
-/*
- * Server states.
- */
-#define UPAPSS_INITIAL 0 /* Connection down */
-#define UPAPSS_CLOSED 1 /* Connection up, haven't requested auth */
-#define UPAPSS_PENDING 2 /* Connection down, have requested auth */
-#define UPAPSS_LISTEN 3 /* Listening for an Authenticate */
-#define UPAPSS_OPEN 4 /* We've sent an Ack */
-#define UPAPSS_BADAUTH 5 /* We've sent a Nak */
-
-
-/*
- * Timeouts.
- */
-#define UPAP_DEFTIMEOUT 3 /* Timeout (seconds) for retransmitting req */
-#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */
-
-extern upap_state upap[];
-
-void upap_authwithpeer __P((int, char *, char *));
-void upap_authpeer __P((int));
-
-extern struct protent pap_protent;
diff --git a/mdk-stage1/ppp/pppd/utils.c b/mdk-stage1/ppp/pppd/utils.c
deleted file mode 100644
index 9c987cfcd..000000000
--- a/mdk-stage1/ppp/pppd/utils.c
+++ /dev/null
@@ -1,949 +0,0 @@
-/*
- * utils.c - various utility functions used in pppd.
- *
- * Copyright (c) 1999 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University. The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID "$Id$"
-
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <netdb.h>
-#include <utmp.h>
-#include <pwd.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#ifdef SVR4
-#include <sys/mkdev.h>
-#endif
-
-#include "pppd.h"
-#include <time.h>
-
-static const char rcsid[] = RCSID;
-
-#if defined(SUNOS4)
-extern char *strerror();
-#endif
-
-static void logit __P((int, char *, va_list));
-static void log_write __P((int, char *));
-static void vslp_printer __P((void *, char *, ...));
-static void format_packet __P((u_char *, int, void (*) (void *, char *, ...),
- void *));
-
-struct buffer_info {
- char *ptr;
- int len;
-};
-
-/*
- * strlcpy - like strcpy/strncpy, doesn't overflow destination buffer,
- * always leaves destination null-terminated (for len > 0).
- */
-size_t
-strlcpy(dest, src, len)
- char *dest;
- const char *src;
- size_t len;
-{
- size_t ret = strlen(src);
-
- if (len != 0) {
- if (ret < len)
- strcpy(dest, src);
- else {
- strncpy(dest, src, len - 1);
- dest[len-1] = 0;
- }
- }
- return ret;
-}
-
-/*
- * strlcat - like strcat/strncat, doesn't overflow destination buffer,
- * always leaves destination null-terminated (for len > 0).
- */
-size_t
-strlcat(dest, src, len)
- char *dest;
- const char *src;
- size_t len;
-{
- size_t dlen = strlen(dest);
-
- return dlen + strlcpy(dest + dlen, src, (len > dlen? len - dlen: 0));
-}
-
-
-/*
- * slprintf - format a message into a buffer. Like sprintf except we
- * also specify the length of the output buffer, and we handle
- * %r (recursive format), %m (error message), %v (visible string),
- * %q (quoted string), %t (current time) and %I (IP address) formats.
- * Doesn't do floating-point formats.
- * Returns the number of chars put into buf.
- */
-int
-slprintf __V((char *buf, int buflen, char *fmt, ...))
-{
- va_list args;
- int n;
-
-#if defined(__STDC__)
- va_start(args, fmt);
-#else
- char *buf;
- int buflen;
- char *fmt;
- va_start(args);
- buf = va_arg(args, char *);
- buflen = va_arg(args, int);
- fmt = va_arg(args, char *);
-#endif
- n = vslprintf(buf, buflen, fmt, args);
- va_end(args);
- return n;
-}
-
-/*
- * vslprintf - like slprintf, takes a va_list instead of a list of args.
- */
-#define OUTCHAR(c) (buflen > 0? (--buflen, *buf++ = (c)): 0)
-
-int
-vslprintf(buf, buflen, fmt, args)
- char *buf;
- int buflen;
- char *fmt;
- va_list args;
-{
- int c, i, n;
- int width, prec, fillch;
- int base, len, neg, quoted;
- unsigned long val = 0;
- char *str, *f, *buf0;
- unsigned char *p;
- char num[32];
- time_t t;
- u_int32_t ip;
- static char hexchars[] = "0123456789abcdef";
- struct buffer_info bufinfo;
-
- buf0 = buf;
- --buflen;
- while (buflen > 0) {
- for (f = fmt; *f != '%' && *f != 0; ++f)
- ;
- if (f > fmt) {
- len = f - fmt;
- if (len > buflen)
- len = buflen;
- memcpy(buf, fmt, len);
- buf += len;
- buflen -= len;
- fmt = f;
- }
- if (*fmt == 0)
- break;
- c = *++fmt;
- width = 0;
- prec = -1;
- fillch = ' ';
- if (c == '0') {
- fillch = '0';
- c = *++fmt;
- }
- if (c == '*') {
- width = va_arg(args, int);
- c = *++fmt;
- } else {
- while (isdigit(c)) {
- width = width * 10 + c - '0';
- c = *++fmt;
- }
- }
- if (c == '.') {
- c = *++fmt;
- if (c == '*') {
- prec = va_arg(args, int);
- c = *++fmt;
- } else {
- prec = 0;
- while (isdigit(c)) {
- prec = prec * 10 + c - '0';
- c = *++fmt;
- }
- }
- }
- str = 0;
- base = 0;
- neg = 0;
- ++fmt;
- switch (c) {
- case 'd':
- i = va_arg(args, int);
- if (i < 0) {
- neg = 1;
- val = -i;
- } else
- val = i;
- base = 10;
- break;
- case 'u':
- val = va_arg(args, unsigned int);
- base = 10;
- break;
- case 'o':
- val = va_arg(args, unsigned int);
- base = 8;
- break;
- case 'x':
- case 'X':
- val = va_arg(args, unsigned int);
- base = 16;
- break;
- case 'p':
- val = (unsigned long) va_arg(args, void *);
- base = 16;
- neg = 2;
- break;
- case 's':
- str = va_arg(args, char *);
- break;
- case 'c':
- num[0] = va_arg(args, int);
- num[1] = 0;
- str = num;
- break;
- case 'm':
- str = strerror(errno);
- break;
- case 'I':
- ip = va_arg(args, u_int32_t);
- ip = ntohl(ip);
- slprintf(num, sizeof(num), "%d.%d.%d.%d", (ip >> 24) & 0xff,
- (ip >> 16) & 0xff, (ip >> 8) & 0xff, ip & 0xff);
- str = num;
- break;
- case 'r':
- f = va_arg(args, char *);
-#ifndef __powerpc__
- n = vslprintf(buf, buflen + 1, f, va_arg(args, va_list));
-#else
- /* On the powerpc, a va_list is an array of 1 structure */
- n = vslprintf(buf, buflen + 1, f, va_arg(args, void *));
-#endif
- buf += n;
- buflen -= n;
- continue;
- case 't':
- time(&t);
- str = ctime(&t);
- str += 4; /* chop off the day name */
- str[15] = 0; /* chop off year and newline */
- break;
- case 'v': /* "visible" string */
- case 'q': /* quoted string */
- quoted = c == 'q';
- p = va_arg(args, unsigned char *);
- if (fillch == '0' && prec >= 0) {
- n = prec;
- } else {
- n = strlen((char *)p);
- if (prec >= 0 && n > prec)
- n = prec;
- }
- while (n > 0 && buflen > 0) {
- c = *p++;
- --n;
- if (!quoted && c >= 0x80) {
- OUTCHAR('M');
- OUTCHAR('-');
- c -= 0x80;
- }
- if (quoted && (c == '"' || c == '\\'))
- OUTCHAR('\\');
- if (c < 0x20 || (0x7f <= c && c < 0xa0)) {
- if (quoted) {
- OUTCHAR('\\');
- switch (c) {
- case '\t': OUTCHAR('t'); break;
- case '\n': OUTCHAR('n'); break;
- case '\b': OUTCHAR('b'); break;
- case '\f': OUTCHAR('f'); break;
- default:
- OUTCHAR('x');
- OUTCHAR(hexchars[c >> 4]);
- OUTCHAR(hexchars[c & 0xf]);
- }
- } else {
- if (c == '\t')
- OUTCHAR(c);
- else {
- OUTCHAR('^');
- OUTCHAR(c ^ 0x40);
- }
- }
- } else
- OUTCHAR(c);
- }
- continue;
- case 'P': /* print PPP packet */
- bufinfo.ptr = buf;
- bufinfo.len = buflen + 1;
- p = va_arg(args, unsigned char *);
- n = va_arg(args, int);
- format_packet(p, n, vslp_printer, &bufinfo);
- buf = bufinfo.ptr;
- buflen = bufinfo.len - 1;
- continue;
- case 'B':
- p = va_arg(args, unsigned char *);
- for (n = prec; n > 0; --n) {
- c = *p++;
- if (fillch == ' ')
- OUTCHAR(' ');
- OUTCHAR(hexchars[(c >> 4) & 0xf]);
- OUTCHAR(hexchars[c & 0xf]);
- }
- continue;
- default:
- *buf++ = '%';
- if (c != '%')
- --fmt; /* so %z outputs %z etc. */
- --buflen;
- continue;
- }
- if (base != 0) {
- str = num + sizeof(num);
- *--str = 0;
- while (str > num + neg) {
- *--str = hexchars[val % base];
- val = val / base;
- if (--prec <= 0 && val == 0)
- break;
- }
- switch (neg) {
- case 1:
- *--str = '-';
- break;
- case 2:
- *--str = 'x';
- *--str = '0';
- break;
- }
- len = num + sizeof(num) - 1 - str;
- } else {
- len = strlen(str);
- if (prec >= 0 && len > prec)
- len = prec;
- }
- if (width > 0) {
- if (width > buflen)
- width = buflen;
- if ((n = width - len) > 0) {
- buflen -= n;
- for (; n > 0; --n)
- *buf++ = fillch;
- }
- }
- if (len > buflen)
- len = buflen;
- memcpy(buf, str, len);
- buf += len;
- buflen -= len;
- }
- *buf = 0;
- return buf - buf0;
-}
-
-/*
- * vslp_printer - used in processing a %P format
- */
-static void
-vslp_printer __V((void *arg, char *fmt, ...))
-{
- int n;
- va_list pvar;
- struct buffer_info *bi;
-
-#if defined(__STDC__)
- va_start(pvar, fmt);
-#else
- void *arg;
- char *fmt;
- va_start(pvar);
- arg = va_arg(pvar, void *);
- fmt = va_arg(pvar, char *);
-#endif
-
- bi = (struct buffer_info *) arg;
- n = vslprintf(bi->ptr, bi->len, fmt, pvar);
- va_end(pvar);
-
- bi->ptr += n;
- bi->len -= n;
-}
-
-#ifdef unused
-/*
- * log_packet - format a packet and log it.
- */
-
-void
-log_packet(p, len, prefix, level)
- u_char *p;
- int len;
- char *prefix;
- int level;
-{
- init_pr_log(prefix, level);
- format_packet(p, len, pr_log, &level);
- end_pr_log();
-}
-#endif /* unused */
-
-/*
- * format_packet - make a readable representation of a packet,
- * calling `printer(arg, format, ...)' to output it.
- */
-static void
-format_packet(p, len, printer, arg)
- u_char *p;
- int len;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int i, n;
- u_short proto;
- struct protent *protp;
-
- if (len >= PPP_HDRLEN && p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) {
- p += 2;
- GETSHORT(proto, p);
- len -= PPP_HDRLEN;
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (proto == protp->protocol)
- break;
- if (protp != NULL) {
- printer(arg, "[%s", protp->name);
- n = (*protp->printpkt)(p, len, printer, arg);
- printer(arg, "]");
- p += n;
- len -= n;
- } else {
- for (i = 0; (protp = protocols[i]) != NULL; ++i)
- if (proto == (protp->protocol & ~0x8000))
- break;
- if (protp != 0 && protp->data_name != 0) {
- printer(arg, "[%s data]", protp->data_name);
- if (len > 8)
- printer(arg, "%.8B ...", p);
- else
- printer(arg, "%.*B", len, p);
- len = 0;
- } else
- printer(arg, "[proto=0x%x]", proto);
- }
- }
-
- if (len > 32)
- printer(arg, "%.32B ...", p);
- else
- printer(arg, "%.*B", len, p);
-}
-
-/*
- * init_pr_log, end_pr_log - initialize and finish use of pr_log.
- */
-
-static char line[256]; /* line to be logged accumulated here */
-static char *linep; /* current pointer within line */
-static int llevel; /* level for logging */
-
-void
-init_pr_log(prefix, level)
- char *prefix;
- int level;
-{
- linep = line;
- if (prefix != NULL) {
- strlcpy(line, prefix, sizeof(line));
- linep = line + strlen(line);
- }
- llevel = level;
-}
-
-void
-end_pr_log()
-{
- if (linep != line) {
- *linep = 0;
- log_write(llevel, line);
- }
-}
-
-/*
- * pr_log - printer routine for outputting to syslog
- */
-void
-pr_log __V((void *arg, char *fmt, ...))
-{
- int l, n;
- va_list pvar;
- char *p, *eol;
- char buf[256];
-
-#if defined(__STDC__)
- va_start(pvar, fmt);
-#else
- void *arg;
- char *fmt;
- va_start(pvar);
- arg = va_arg(pvar, void *);
- fmt = va_arg(pvar, char *);
-#endif
-
- n = vslprintf(buf, sizeof(buf), fmt, pvar);
- va_end(pvar);
-
- p = buf;
- eol = strchr(buf, '\n');
- if (linep != line) {
- l = (eol == NULL)? n: eol - buf;
- if (linep + l < line + sizeof(line)) {
- if (l > 0) {
- memcpy(linep, buf, l);
- linep += l;
- }
- if (eol == NULL)
- return;
- p = eol + 1;
- eol = strchr(p, '\n');
- }
- *linep = 0;
- log_write(llevel, line);
- linep = line;
- }
-
- while (eol != NULL) {
- *eol = 0;
- log_write(llevel, p);
- p = eol + 1;
- eol = strchr(p, '\n');
- }
-
- /* assumes sizeof(buf) <= sizeof(line) */
- l = buf + n - p;
- if (l > 0) {
- memcpy(line, p, n);
- linep = line + l;
- }
-}
-
-/*
- * print_string - print a readable representation of a string using
- * printer.
- */
-void
-print_string(p, len, printer, arg)
- char *p;
- int len;
- void (*printer) __P((void *, char *, ...));
- void *arg;
-{
- int c;
-
- printer(arg, "\"");
- for (; len > 0; --len) {
- c = *p++;
- if (' ' <= c && c <= '~') {
- if (c == '\\' || c == '"')
- printer(arg, "\\");
- printer(arg, "%c", c);
- } else {
- switch (c) {
- case '\n':
- printer(arg, "\\n");
- break;
- case '\r':
- printer(arg, "\\r");
- break;
- case '\t':
- printer(arg, "\\t");
- break;
- default:
- printer(arg, "\\%.3o", c);
- }
- }
- }
- printer(arg, "\"");
-}
-
-/*
- * logit - does the hard work for fatal et al.
- */
-static void
-logit(level, fmt, args)
- int level;
- char *fmt;
- va_list args;
-{
- int n;
- char buf[1024];
-
- n = vslprintf(buf, sizeof(buf), fmt, args);
- log_write(level, buf);
-}
-
-static void
-log_write(level, buf)
- int level;
- char *buf;
-{
- syslog(level, "%s", buf);
- if (log_to_fd >= 0 && (level != LOG_DEBUG || debug)) {
- int n = strlen(buf);
-
- if (n > 0 && buf[n-1] == '\n')
- --n;
- if (write(log_to_fd, buf, n) != n
- || write(log_to_fd, "\n", 1) != 1)
- log_to_fd = -1;
- }
-}
-
-/*
- * fatal - log an error message and die horribly.
- */
-void
-fatal __V((char *fmt, ...))
-{
- va_list pvar;
-
-#if defined(__STDC__)
- va_start(pvar, fmt);
-#else
- char *fmt;
- va_start(pvar);
- fmt = va_arg(pvar, char *);
-#endif
-
- logit(LOG_ERR, fmt, pvar);
- va_end(pvar);
-
- die(1); /* as promised */
-}
-
-/*
- * error - log an error message.
- */
-void
-error __V((char *fmt, ...))
-{
- va_list pvar;
-
-#if defined(__STDC__)
- va_start(pvar, fmt);
-#else
- char *fmt;
- va_start(pvar);
- fmt = va_arg(pvar, char *);
-#endif
-
- logit(LOG_ERR, fmt, pvar);
- va_end(pvar);
-}
-
-/*
- * warn - log a warning message.
- */
-void
-warn __V((char *fmt, ...))
-{
- va_list pvar;
-
-#if defined(__STDC__)
- va_start(pvar, fmt);
-#else
- char *fmt;
- va_start(pvar);
- fmt = va_arg(pvar, char *);
-#endif
-
- logit(LOG_WARNING, fmt, pvar);
- va_end(pvar);
-}
-
-/*
- * notice - log a notice-level message.
- */
-void
-notice __V((char *fmt, ...))
-{
- va_list pvar;
-
-#if defined(__STDC__)
- va_start(pvar, fmt);
-#else
- char *fmt;
- va_start(pvar);
- fmt = va_arg(pvar, char *);
-#endif
-
- logit(LOG_NOTICE, fmt, pvar);
- va_end(pvar);
-}
-
-/*
- * info - log an informational message.
- */
-void
-info __V((char *fmt, ...))
-{
- va_list pvar;
-
-#if defined(__STDC__)
- va_start(pvar, fmt);
-#else
- char *fmt;
- va_start(pvar);
- fmt = va_arg(pvar, char *);
-#endif
-
- logit(LOG_INFO, fmt, pvar);
- va_end(pvar);
-}
-
-/*
- * dbglog - log a debug message.
- */
-void
-dbglog __V((char *fmt, ...))
-{
- va_list pvar;
-
-#if defined(__STDC__)
- va_start(pvar, fmt);
-#else
- char *fmt;
- va_start(pvar);
- fmt = va_arg(pvar, char *);
-#endif
-
- logit(LOG_DEBUG, fmt, pvar);
- va_end(pvar);
-}
-
-/* Procedures for locking the serial device using a lock file. */
-#ifndef LOCK_DIR
-#ifdef _linux_
-#define LOCK_DIR "/var/lock"
-#else
-#ifdef SVR4
-#define LOCK_DIR "/var/spool/locks"
-#else
-#define LOCK_DIR "/var/spool/lock"
-#endif
-#endif
-#endif /* LOCK_DIR */
-
-static char lock_file[MAXPATHLEN];
-
-/*
- * lock - create a lock file for the named device
- */
-int
-lock(dev)
- char *dev;
-{
-#ifdef LOCKLIB
- int result;
-
- result = mklock (dev, (void *) 0);
- if (result == 0) {
- strlcpy(lock_file, sizeof(lock_file), dev);
- return 0;
- }
-
- if (result > 0)
- notice("Device %s is locked by pid %d", dev, result);
- else
- error("Can't create lock file %s", lock_file);
- return -1;
-
-#else /* LOCKLIB */
-
- char lock_buffer[12];
- int fd, pid, n;
-
-#ifdef SVR4
- struct stat sbuf;
-
- if (stat(dev, &sbuf) < 0) {
- error("Can't get device number for %s: %m", dev);
- return -1;
- }
- if ((sbuf.st_mode & S_IFMT) != S_IFCHR) {
- error("Can't lock %s: not a character device", dev);
- return -1;
- }
- slprintf(lock_file, sizeof(lock_file), "%s/LK.%03d.%03d.%03d",
- LOCK_DIR, major(sbuf.st_dev),
- major(sbuf.st_rdev), minor(sbuf.st_rdev));
-#else
- char *p;
-
- if ((p = strrchr(dev, '/')) != NULL)
- dev = p + 1;
- slprintf(lock_file, sizeof(lock_file), "%s/LCK..%s", LOCK_DIR, dev);
-#endif
-
- while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
- if (errno != EEXIST) {
- error("Can't create lock file %s: %m", lock_file);
- break;
- }
-
- /* Read the lock file to find out who has the device locked. */
- fd = open(lock_file, O_RDONLY, 0);
- if (fd < 0) {
- if (errno == ENOENT) /* This is just a timing problem. */
- continue;
- error("Can't open existing lock file %s: %m", lock_file);
- break;
- }
-#ifndef LOCK_BINARY
- n = read(fd, lock_buffer, 11);
-#else
- n = read(fd, &pid, sizeof(pid));
-#endif /* LOCK_BINARY */
- close(fd);
- fd = -1;
- if (n <= 0) {
- error("Can't read pid from lock file %s", lock_file);
- break;
- }
-
- /* See if the process still exists. */
-#ifndef LOCK_BINARY
- lock_buffer[n] = 0;
- pid = atoi(lock_buffer);
-#endif /* LOCK_BINARY */
- if (pid == getpid())
- return 1; /* somebody else locked it for us */
- if (pid == 0
- || (kill(pid, 0) == -1 && errno == ESRCH)) {
- if (unlink (lock_file) == 0) {
- notice("Removed stale lock on %s (pid %d)", dev, pid);
- continue;
- }
- warn("Couldn't remove stale lock on %s", dev);
- } else
- notice("Device %s is locked by pid %d", dev, pid);
- break;
- }
-
- if (fd < 0) {
- lock_file[0] = 0;
- return -1;
- }
-
- pid = getpid();
-#ifndef LOCK_BINARY
- slprintf(lock_buffer, sizeof(lock_buffer), "%10d\n", pid);
- write (fd, lock_buffer, 11);
-#else
- write(fd, &pid, sizeof (pid));
-#endif
- close(fd);
- return 0;
-
-#endif
-}
-
-/*
- * relock - called to update our lockfile when we are about to detach,
- * thus changing our pid (we fork, the child carries on, and the parent dies).
- * Note that this is called by the parent, with pid equal to the pid
- * of the child. This avoids a potential race which would exist if
- * we had the child rewrite the lockfile (the parent might die first,
- * and another process could think the lock was stale if it checked
- * between when the parent died and the child rewrote the lockfile).
- */
-int
-relock(pid)
- int pid;
-{
-#ifdef LOCKLIB
- /* XXX is there a way to do this? */
- return -1;
-#else /* LOCKLIB */
-
- int fd;
- char lock_buffer[12];
-
- if (lock_file[0] == 0)
- return -1;
- fd = open(lock_file, O_WRONLY, 0);
- if (fd < 0) {
- error("Couldn't reopen lock file %s: %m", lock_file);
- lock_file[0] = 0;
- return -1;
- }
-
-#ifndef LOCK_BINARY
- slprintf(lock_buffer, sizeof(lock_buffer), "%10d\n", pid);
- write (fd, lock_buffer, 11);
-#else
- write(fd, &pid, sizeof(pid));
-#endif /* LOCK_BINARY */
- close(fd);
- return 0;
-
-#endif /* LOCKLIB */
-}
-
-/*
- * unlock - remove our lockfile
- */
-void
-unlock()
-{
- if (lock_file[0]) {
-#ifdef LOCKLIB
- (void) rmlock(lock_file, (void *) 0);
-#else
- unlink(lock_file);
-#endif
- lock_file[0] = 0;
- }
-}
-
diff --git a/mdk-stage1/ppp/pppdump/Makefile.linux b/mdk-stage1/ppp/pppdump/Makefile.linux
deleted file mode 100644
index 1d8d78ff7..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.linux
+++ /dev/null
@@ -1,17 +0,0 @@
-CFLAGS= -I../include/net $(RPM_OPT_FLAGS)
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-INSTALL= install
-
-all: pppdump
-
-pppdump: $(OBJS)
- $(CC) $(RPM_OPT_FLAGS) -o pppdump $(OBJS)
-
-clean:
- rm -f pppdump $(OBJS) *~
-
-install:
- mkdir -p $(BINDIR) $(MANDIR)/man8
- $(INSTALL) -s -c pppdump $(BINDIR)
- $(INSTALL) -c pppdump.8 $(MANDIR)/man8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.linux.makeopt b/mdk-stage1/ppp/pppdump/Makefile.linux.makeopt
deleted file mode 100644
index d02fecde8..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.linux.makeopt
+++ /dev/null
@@ -1,17 +0,0 @@
-CFLAGS= -O -I../include/net
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-INSTALL= install
-
-all: pppdump
-
-pppdump: $(OBJS)
- $(CC) -o pppdump $(OBJS)
-
-clean:
- rm -f pppdump $(OBJS) *~
-
-install:
- mkdir -p $(BINDIR) $(MANDIR)/man8
- $(INSTALL) -s -c pppdump $(BINDIR)
- $(INSTALL) -c -m 444 pppdump.8 $(MANDIR)/man8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile b/mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile
deleted file mode 100644
index 4c98b6c6d..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-CFLAGS= -O -I../include/net
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-INSTALL= install
-
-all: pppdump
-
-pppdump: $(OBJS)
- $(CC) $(RPM_OPT_FLAGS) -o pppdump $(OBJS)
-
-clean:
- rm -f pppdump $(OBJS) *~
-
-install:
- mkdir -p $(BINDIR) $(MANDIR)/man8
- $(INSTALL) -s -c pppdump $(BINDIR)
- $(INSTALL) -c -m 444 pppdump.8 $(MANDIR)/man8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.sol2 b/mdk-stage1/ppp/pppdump/Makefile.sol2
deleted file mode 100644
index d7e6b413e..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.sol2
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# pppdump Makefile for SVR4 systems
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-CFLAGS= $(COPTS) -I../include/net
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-all: pppdump
-
-pppdump: $(OBJS)
- $(CC) -o pppdump $(OBJS)
-
-clean:
- rm -f $(OBJS) pppdump *~
-
-install:
- $(INSTALL) -f $(BINDIR) pppdump
- $(INSTALL) -m 444 -f $(MANDIR)/man8 pppdump.8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.sunos4 b/mdk-stage1/ppp/pppdump/Makefile.sunos4
deleted file mode 100644
index 915c8267d..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.sunos4
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# pppstats makefile
-# $Id$
-#
-
-include ../sunos4/Makedefs
-
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-CFLAGS = $(COPTS) -I../include/net
-
-all: pppdump
-
-pppdump: $(OBJS)
- $(CC) -o pppdump $(OBJS)
-
-clean:
- rm -f pppdump $(OBJS) *~
-
-install: pppdump
- $(INSTALL) -c pppdump $(BINDIR)/pppdump
- $(INSTALL) -c -m 444 pppdump.8 $(MANDIR)/man8/pppdump.8
diff --git a/mdk-stage1/ppp/pppdump/bsd-comp.c b/mdk-stage1/ppp/pppdump/bsd-comp.c
deleted file mode 100644
index 1e14e98bb..000000000
--- a/mdk-stage1/ppp/pppdump/bsd-comp.c
+++ /dev/null
@@ -1,750 +0,0 @@
-/* Because this code is derived from the 4.3BSD compress source:
- *
- *
- * Copyright (c) 1985, 1986 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * James A. Woods, derived from original work by Spencer Thomas
- * and Joseph Orost.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by the University of
- * California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * $Id$
- */
-
-#include <sys/types.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include "ppp_defs.h"
-#include "ppp-comp.h"
-
-#if DO_BSD_COMPRESS
-
-/*
- * PPP "BSD compress" compression
- * The differences between this compression and the classic BSD LZW
- * source are obvious from the requirement that the classic code worked
- * with files while this handles arbitrarily long streams that
- * are broken into packets. They are:
- *
- * When the code size expands, a block of junk is not emitted by
- * the compressor and not expected by the decompressor.
- *
- * New codes are not necessarily assigned every time an old
- * code is output by the compressor. This is because a packet
- * end forces a code to be emitted, but does not imply that a
- * new sequence has been seen.
- *
- * The compression ratio is checked at the first end of a packet
- * after the appropriate gap. Besides simplifying and speeding
- * things up, this makes it more likely that the transmitter
- * and receiver will agree when the dictionary is cleared when
- * compression is not going well.
- */
-
-/*
- * A dictionary for doing BSD compress.
- */
-struct bsd_db {
- int totlen; /* length of this structure */
- u_int hsize; /* size of the hash table */
- u_char hshift; /* used in hash function */
- u_char n_bits; /* current bits/code */
- u_char maxbits;
- u_char debug;
- u_char unit;
- u_short seqno; /* sequence number of next packet */
- u_int hdrlen; /* header length to preallocate */
- u_int mru;
- u_int maxmaxcode; /* largest valid code */
- u_int max_ent; /* largest code in use */
- u_int in_count; /* uncompressed bytes, aged */
- u_int bytes_out; /* compressed bytes, aged */
- u_int ratio; /* recent compression ratio */
- u_int checkpoint; /* when to next check the ratio */
- u_int clear_count; /* times dictionary cleared */
- u_int incomp_count; /* incompressible packets */
- u_int incomp_bytes; /* incompressible bytes */
- u_int uncomp_count; /* uncompressed packets */
- u_int uncomp_bytes; /* uncompressed bytes */
- u_int comp_count; /* compressed packets */
- u_int comp_bytes; /* compressed bytes */
- u_short *lens; /* array of lengths of codes */
- struct bsd_dict {
- union { /* hash value */
- u_int32_t fcode;
- struct {
-#ifdef BSD_LITTLE_ENDIAN
- u_short prefix; /* preceding code */
- u_char suffix; /* last character of new code */
- u_char pad;
-#else
- u_char pad;
- u_char suffix; /* last character of new code */
- u_short prefix; /* preceding code */
-#endif
- } hs;
- } f;
- u_short codem1; /* output of hash table -1 */
- u_short cptr; /* map code to hash table entry */
- } dict[1];
-};
-
-#define BSD_OVHD 2 /* BSD compress overhead/packet */
-#define BSD_INIT_BITS BSD_MIN_BITS
-
-static void *bsd_decomp_alloc __P((u_char *options, int opt_len));
-static void bsd_free __P((void *state));
-static int bsd_decomp_init __P((void *state, u_char *options, int opt_len,
- int unit, int hdrlen, int mru, int debug));
-static void bsd_incomp __P((void *state, u_char *dmsg, int len));
-static int bsd_decompress __P((void *state, u_char *cmp, int inlen,
- u_char *dmp, int *outlen));
-static void bsd_reset __P((void *state));
-static void bsd_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Exported procedures.
- */
-struct compressor ppp_bsd_compress = {
- CI_BSD_COMPRESS, /* compress_proto */
- bsd_decomp_alloc, /* decomp_alloc */
- bsd_free, /* decomp_free */
- bsd_decomp_init, /* decomp_init */
- bsd_reset, /* decomp_reset */
- bsd_decompress, /* decompress */
- bsd_incomp, /* incomp */
- bsd_comp_stats, /* decomp_stat */
-};
-
-/*
- * the next two codes should not be changed lightly, as they must not
- * lie within the contiguous general code space.
- */
-#define CLEAR 256 /* table clear output code */
-#define FIRST 257 /* first free entry */
-#define LAST 255
-
-#define MAXCODE(b) ((1 << (b)) - 1)
-#define BADCODEM1 MAXCODE(BSD_MAX_BITS)
-
-#define BSD_HASH(prefix,suffix,hshift) ((((u_int32_t)(suffix)) << (hshift)) \
- ^ (u_int32_t)(prefix))
-#define BSD_KEY(prefix,suffix) ((((u_int32_t)(suffix)) << 16) \
- + (u_int32_t)(prefix))
-
-#define CHECK_GAP 10000 /* Ratio check interval */
-
-#define RATIO_SCALE_LOG 8
-#define RATIO_SCALE (1<<RATIO_SCALE_LOG)
-#define RATIO_MAX (0x7fffffff>>RATIO_SCALE_LOG)
-
-/*
- * clear the dictionary
- */
-static void
-bsd_clear(db)
- struct bsd_db *db;
-{
- db->clear_count++;
- db->max_ent = FIRST-1;
- db->n_bits = BSD_INIT_BITS;
- db->ratio = 0;
- db->bytes_out = 0;
- db->in_count = 0;
- db->checkpoint = CHECK_GAP;
-}
-
-/*
- * If the dictionary is full, then see if it is time to reset it.
- *
- * Compute the compression ratio using fixed-point arithmetic
- * with 8 fractional bits.
- *
- * Since we have an infinite stream instead of a single file,
- * watch only the local compression ratio.
- *
- * Since both peers must reset the dictionary at the same time even in
- * the absence of CLEAR codes (while packets are incompressible), they
- * must compute the same ratio.
- */
-static int /* 1=output CLEAR */
-bsd_check(db)
- struct bsd_db *db;
-{
- u_int new_ratio;
-
- if (db->in_count >= db->checkpoint) {
- /* age the ratio by limiting the size of the counts */
- if (db->in_count >= RATIO_MAX
- || db->bytes_out >= RATIO_MAX) {
- db->in_count -= db->in_count/4;
- db->bytes_out -= db->bytes_out/4;
- }
-
- db->checkpoint = db->in_count + CHECK_GAP;
-
- if (db->max_ent >= db->maxmaxcode) {
- /* Reset the dictionary only if the ratio is worse,
- * or if it looks as if it has been poisoned
- * by incompressible data.
- *
- * This does not overflow, because
- * db->in_count <= RATIO_MAX.
- */
- new_ratio = db->in_count << RATIO_SCALE_LOG;
- if (db->bytes_out != 0)
- new_ratio /= db->bytes_out;
-
- if (new_ratio < db->ratio || new_ratio < 1 * RATIO_SCALE) {
- bsd_clear(db);
- return 1;
- }
- db->ratio = new_ratio;
- }
- }
- return 0;
-}
-
-/*
- * Return statistics.
- */
-static void
-bsd_comp_stats(state, stats)
- void *state;
- struct compstat *stats;
-{
- struct bsd_db *db = (struct bsd_db *) state;
- u_int out;
-
- stats->unc_bytes = db->uncomp_bytes;
- stats->unc_packets = db->uncomp_count;
- stats->comp_bytes = db->comp_bytes;
- stats->comp_packets = db->comp_count;
- stats->inc_bytes = db->incomp_bytes;
- stats->inc_packets = db->incomp_count;
- stats->ratio = db->in_count;
- out = db->bytes_out;
- if (stats->ratio <= 0x7fffff)
- stats->ratio <<= 8;
- else
- out >>= 8;
- if (out != 0)
- stats->ratio /= out;
-}
-
-/*
- * Reset state, as on a CCP ResetReq.
- */
-static void
-bsd_reset(state)
- void *state;
-{
- struct bsd_db *db = (struct bsd_db *) state;
-
- db->seqno = 0;
- bsd_clear(db);
- db->clear_count = 0;
-}
-
-/*
- * Allocate space for a (de) compressor.
- */
-static void *
-bsd_alloc(options, opt_len, decomp)
- u_char *options;
- int opt_len, decomp;
-{
- int bits;
- u_int newlen, hsize, hshift, maxmaxcode;
- struct bsd_db *db;
-
- if (opt_len != 3 || options[0] != CI_BSD_COMPRESS || options[1] != 3
- || BSD_VERSION(options[2]) != BSD_CURRENT_VERSION)
- return NULL;
-
- bits = BSD_NBITS(options[2]);
- switch (bits) {
- case 9: /* needs 82152 for both directions */
- case 10: /* needs 84144 */
- case 11: /* needs 88240 */
- case 12: /* needs 96432 */
- hsize = 5003;
- hshift = 4;
- break;
- case 13: /* needs 176784 */
- hsize = 9001;
- hshift = 5;
- break;
- case 14: /* needs 353744 */
- hsize = 18013;
- hshift = 6;
- break;
- case 15: /* needs 691440 */
- hsize = 35023;
- hshift = 7;
- break;
- case 16: /* needs 1366160--far too much, */
- /* hsize = 69001; */ /* and 69001 is too big for cptr */
- /* hshift = 8; */ /* in struct bsd_db */
- /* break; */
- default:
- return NULL;
- }
-
- maxmaxcode = MAXCODE(bits);
- newlen = sizeof(*db) + (hsize-1) * (sizeof(db->dict[0]));
- db = (struct bsd_db *) malloc(newlen);
- if (!db)
- return NULL;
- memset(db, 0, sizeof(*db) - sizeof(db->dict));
-
- if (!decomp) {
- db->lens = NULL;
- } else {
- db->lens = (u_short *) malloc((maxmaxcode+1) * sizeof(db->lens[0]));
- if (!db->lens) {
- free(db);
- return NULL;
- }
- }
-
- db->totlen = newlen;
- db->hsize = hsize;
- db->hshift = hshift;
- db->maxmaxcode = maxmaxcode;
- db->maxbits = bits;
-
- return (void *) db;
-}
-
-static void
-bsd_free(state)
- void *state;
-{
- struct bsd_db *db = (struct bsd_db *) state;
-
- if (db->lens)
- free(db->lens);
- free(db);
-}
-
-static void *
-bsd_decomp_alloc(options, opt_len)
- u_char *options;
- int opt_len;
-{
- return bsd_alloc(options, opt_len, 1);
-}
-
-/*
- * Initialize the database.
- */
-static int
-bsd_init(db, options, opt_len, unit, hdrlen, mru, debug, decomp)
- struct bsd_db *db;
- u_char *options;
- int opt_len, unit, hdrlen, mru, debug, decomp;
-{
- int i;
-
- if (opt_len < CILEN_BSD_COMPRESS
- || options[0] != CI_BSD_COMPRESS || options[1] != CILEN_BSD_COMPRESS
- || BSD_VERSION(options[2]) != BSD_CURRENT_VERSION
- || BSD_NBITS(options[2]) != db->maxbits
- || decomp && db->lens == NULL)
- return 0;
-
- if (decomp) {
- i = LAST+1;
- while (i != 0)
- db->lens[--i] = 1;
- }
- i = db->hsize;
- while (i != 0) {
- db->dict[--i].codem1 = BADCODEM1;
- db->dict[i].cptr = 0;
- }
-
- db->unit = unit;
- db->hdrlen = hdrlen;
- db->mru = mru;
- if (debug)
- db->debug = 1;
-
- bsd_reset(db);
-
- return 1;
-}
-
-static int
-bsd_decomp_init(state, options, opt_len, unit, hdrlen, mru, debug)
- void *state;
- u_char *options;
- int opt_len, unit, hdrlen, mru, debug;
-{
- return bsd_init((struct bsd_db *) state, options, opt_len,
- unit, hdrlen, mru, debug, 1);
-}
-
-
-/*
- * Update the "BSD Compress" dictionary on the receiver for
- * incompressible data by pretending to compress the incoming data.
- */
-static void
-bsd_incomp(state, dmsg, mlen)
- void *state;
- u_char *dmsg;
- int mlen;
-{
- struct bsd_db *db = (struct bsd_db *) state;
- u_int hshift = db->hshift;
- u_int max_ent = db->max_ent;
- u_int n_bits = db->n_bits;
- struct bsd_dict *dictp;
- u_int32_t fcode;
- u_char c;
- long hval, disp;
- int slen, ilen;
- u_int bitno = 7;
- u_char *rptr;
- u_int ent;
-
- rptr = dmsg;
- ent = rptr[0]; /* get the protocol */
- if (ent == 0) {
- ++rptr;
- --mlen;
- ent = rptr[0];
- }
- if ((ent & 1) == 0 || ent < 0x21 || ent > 0xf9)
- return;
-
- db->seqno++;
- ilen = 1; /* count the protocol as 1 byte */
- ++rptr;
- slen = dmsg + mlen - rptr;
- ilen += slen;
- for (; slen > 0; --slen) {
- c = *rptr++;
- fcode = BSD_KEY(ent, c);
- hval = BSD_HASH(ent, c, hshift);
- dictp = &db->dict[hval];
-
- /* validate and then check the entry */
- if (dictp->codem1 >= max_ent)
- goto nomatch;
- if (dictp->f.fcode == fcode) {
- ent = dictp->codem1+1;
- continue; /* found (prefix,suffix) */
- }
-
- /* continue probing until a match or invalid entry */
- disp = (hval == 0) ? 1 : hval;
- do {
- hval += disp;
- if (hval >= db->hsize)
- hval -= db->hsize;
- dictp = &db->dict[hval];
- if (dictp->codem1 >= max_ent)
- goto nomatch;
- } while (dictp->f.fcode != fcode);
- ent = dictp->codem1+1;
- continue; /* finally found (prefix,suffix) */
-
- nomatch: /* output (count) the prefix */
- bitno += n_bits;
-
- /* code -> hashtable */
- if (max_ent < db->maxmaxcode) {
- struct bsd_dict *dictp2;
- /* expand code size if needed */
- if (max_ent >= MAXCODE(n_bits))
- db->n_bits = ++n_bits;
-
- /* Invalidate previous hash table entry
- * assigned this code, and then take it over.
- */
- dictp2 = &db->dict[max_ent+1];
- if (db->dict[dictp2->cptr].codem1 == max_ent)
- db->dict[dictp2->cptr].codem1 = BADCODEM1;
- dictp2->cptr = hval;
- dictp->codem1 = max_ent;
- dictp->f.fcode = fcode;
-
- db->max_ent = ++max_ent;
- db->lens[max_ent] = db->lens[ent]+1;
- }
- ent = c;
- }
- bitno += n_bits; /* output (count) the last code */
- db->bytes_out += bitno/8;
- db->in_count += ilen;
- (void)bsd_check(db);
-
- ++db->incomp_count;
- db->incomp_bytes += ilen;
- ++db->uncomp_count;
- db->uncomp_bytes += ilen;
-
- /* Increase code size if we would have without the packet
- * boundary and as the decompressor will.
- */
- if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode)
- db->n_bits++;
-}
-
-
-/*
- * Decompress "BSD Compress"
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression. For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-bsd_decompress(state, cmsg, inlen, dmp, outlenp)
- void *state;
- u_char *cmsg, *dmp;
- int inlen, *outlenp;
-{
- struct bsd_db *db = (struct bsd_db *) state;
- u_int max_ent = db->max_ent;
- u_int32_t accm = 0;
- u_int bitno = 32; /* 1st valid bit in accm */
- u_int n_bits = db->n_bits;
- u_int tgtbitno = 32-n_bits; /* bitno when we have a code */
- struct bsd_dict *dictp;
- int explen, i, seq, len;
- u_int incode, oldcode, finchar;
- u_char *p, *rptr, *wptr;
- int ilen;
- int dlen, space, codelen, extra;
-
- rptr = cmsg;
- if (*rptr == 0)
- ++rptr;
- ++rptr; /* skip protocol (assumed 0xfd) */
- seq = (rptr[0] << 8) + rptr[1];
- rptr += BSD_OVHD;
- ilen = len = cmsg + inlen - rptr;
-
- /*
- * Check the sequence number and give up if it is not what we expect.
- */
- if (seq != db->seqno++) {
- if (db->debug)
- printf("bsd_decomp%d: bad sequence # %d, expected %d\n",
- db->unit, seq, db->seqno - 1);
- return DECOMP_ERROR;
- }
-
- wptr = dmp + db->hdrlen;
-
- oldcode = CLEAR;
- explen = 0;
- while (len > 0) {
- /*
- * Accumulate bytes until we have a complete code.
- * Then get the next code, relying on the 32-bit,
- * unsigned accm to mask the result.
- */
- bitno -= 8;
- accm |= *rptr++ << bitno;
- --len;
- if (tgtbitno < bitno)
- continue;
- incode = accm >> tgtbitno;
- accm <<= n_bits;
- bitno += n_bits;
-
- if (incode == CLEAR) {
- /*
- * The dictionary must only be cleared at
- * the end of a packet. But there could be an
- * empty message block at the end.
- */
- if (len > 0) {
- if (db->debug)
- printf("bsd_decomp%d: bad CLEAR\n", db->unit);
- return DECOMP_FATALERROR;
- }
- bsd_clear(db);
- explen = ilen = 0;
- break;
- }
-
- if (incode > max_ent + 2 || incode > db->maxmaxcode
- || incode > max_ent && oldcode == CLEAR) {
- if (db->debug) {
- printf("bsd_decomp%d: bad code 0x%x oldcode=0x%x ",
- db->unit, incode, oldcode);
- printf("max_ent=0x%x dlen=%d seqno=%d\n",
- max_ent, dlen, db->seqno);
- }
- return DECOMP_FATALERROR; /* probably a bug */
- }
-
- /* Special case for KwKwK string. */
- if (incode > max_ent) {
- finchar = oldcode;
- extra = 1;
- } else {
- finchar = incode;
- extra = 0;
- }
-
- codelen = db->lens[finchar];
- explen += codelen + extra;
- if (explen > db->mru + 1) {
- if (db->debug)
- printf("bsd_decomp%d: ran out of mru\n", db->unit);
- return DECOMP_FATALERROR;
- }
-
- /*
- * Decode this code and install it in the decompressed buffer.
- */
- p = (wptr += codelen);
- while (finchar > LAST) {
- dictp = &db->dict[db->dict[finchar].cptr];
-#ifdef DEBUG
- --codelen;
- if (codelen <= 0) {
- printf("bsd_decomp%d: fell off end of chain ", db->unit);
- printf("0x%x at 0x%x by 0x%x, max_ent=0x%x\n",
- incode, finchar, db->dict[finchar].cptr, max_ent);
- return DECOMP_FATALERROR;
- }
- if (dictp->codem1 != finchar-1) {
- printf("bsd_decomp%d: bad code chain 0x%x finchar=0x%x ",
- db->unit, incode, finchar);
- printf("oldcode=0x%x cptr=0x%x codem1=0x%x\n", oldcode,
- db->dict[finchar].cptr, dictp->codem1);
- return DECOMP_FATALERROR;
- }
-#endif
- *--p = dictp->f.hs.suffix;
- finchar = dictp->f.hs.prefix;
- }
- *--p = finchar;
-
-#ifdef DEBUG
- if (--codelen != 0)
- printf("bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n",
- db->unit, codelen, incode, max_ent);
-#endif
-
- if (extra) /* the KwKwK case again */
- *wptr++ = finchar;
-
- /*
- * If not first code in a packet, and
- * if not out of code space, then allocate a new code.
- *
- * Keep the hash table correct so it can be used
- * with uncompressed packets.
- */
- if (oldcode != CLEAR && max_ent < db->maxmaxcode) {
- struct bsd_dict *dictp2;
- u_int32_t fcode;
- int hval, disp;
-
- fcode = BSD_KEY(oldcode,finchar);
- hval = BSD_HASH(oldcode,finchar,db->hshift);
- dictp = &db->dict[hval];
-
- /* look for a free hash table entry */
- if (dictp->codem1 < max_ent) {
- disp = (hval == 0) ? 1 : hval;
- do {
- hval += disp;
- if (hval >= db->hsize)
- hval -= db->hsize;
- dictp = &db->dict[hval];
- } while (dictp->codem1 < max_ent);
- }
-
- /*
- * Invalidate previous hash table entry
- * assigned this code, and then take it over
- */
- dictp2 = &db->dict[max_ent+1];
- if (db->dict[dictp2->cptr].codem1 == max_ent) {
- db->dict[dictp2->cptr].codem1 = BADCODEM1;
- }
- dictp2->cptr = hval;
- dictp->codem1 = max_ent;
- dictp->f.fcode = fcode;
-
- db->max_ent = ++max_ent;
- db->lens[max_ent] = db->lens[oldcode]+1;
-
- /* Expand code size if needed. */
- if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode) {
- db->n_bits = ++n_bits;
- tgtbitno = 32-n_bits;
- }
- }
- oldcode = incode;
- }
- *outlenp = wptr - (dmp + db->hdrlen);
-
- /*
- * Keep the checkpoint right so that incompressible packets
- * clear the dictionary at the right times.
- */
- db->bytes_out += ilen;
- db->in_count += explen;
- if (bsd_check(db) && db->debug) {
- printf("bsd_decomp%d: peer should have cleared dictionary\n",
- db->unit);
- }
-
- ++db->comp_count;
- db->comp_bytes += ilen + BSD_OVHD;
- ++db->uncomp_count;
- db->uncomp_bytes += explen;
-
- return DECOMP_OK;
-}
-#endif /* DO_BSD_COMPRESS */
diff --git a/mdk-stage1/ppp/pppdump/deflate.c b/mdk-stage1/ppp/pppdump/deflate.c
deleted file mode 100644
index 08e8abc0d..000000000
--- a/mdk-stage1/ppp/pppdump/deflate.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * ppp_deflate.c - interface the zlib procedures for Deflate compression
- * and decompression (as used by gzip) to the PPP code.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#include <sys/types.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include "ppp_defs.h"
-#include "ppp-comp.h"
-#include "zlib.h"
-
-#if DO_DEFLATE
-
-#define DEFLATE_DEBUG 1
-
-/*
- * State for a Deflate (de)compressor.
- */
-struct deflate_state {
- int seqno;
- int w_size;
- int unit;
- int hdrlen;
- int mru;
- int debug;
- z_stream strm;
- struct compstat stats;
-};
-
-#define DEFLATE_OVHD 2 /* Deflate overhead/packet */
-
-static void *z_alloc __P((void *, u_int items, u_int size));
-static void z_free __P((void *, void *ptr, u_int nb));
-static void *z_decomp_alloc __P((u_char *options, int opt_len));
-static void z_decomp_free __P((void *state));
-static int z_decomp_init __P((void *state, u_char *options, int opt_len,
- int unit, int hdrlen, int mru, int debug));
-static void z_incomp __P((void *state, u_char *dmsg, int len));
-static int z_decompress __P((void *state, u_char *cmp, int inlen,
- u_char *dmp, int *outlenp));
-static void z_decomp_reset __P((void *state));
-static void z_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Procedures exported to if_ppp.c.
- */
-struct compressor ppp_deflate = {
- CI_DEFLATE, /* compress_proto */
- z_decomp_alloc, /* decomp_alloc */
- z_decomp_free, /* decomp_free */
- z_decomp_init, /* decomp_init */
- z_decomp_reset, /* decomp_reset */
- z_decompress, /* decompress */
- z_incomp, /* incomp */
- z_comp_stats, /* decomp_stat */
-};
-
-/*
- * Space allocation and freeing routines for use by zlib routines.
- */
-static void *
-z_alloc(notused, items, size)
- void *notused;
- u_int items, size;
-{
- return malloc(items * size);
-}
-
-static void
-z_free(notused, ptr, nbytes)
- void *notused;
- void *ptr;
- u_int nbytes;
-{
- free(ptr);
-}
-
-static void
-z_comp_stats(arg, stats)
- void *arg;
- struct compstat *stats;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
- u_int out;
-
- *stats = state->stats;
- stats->ratio = stats->unc_bytes;
- out = stats->comp_bytes + stats->unc_bytes;
- if (stats->ratio <= 0x7ffffff)
- stats->ratio <<= 8;
- else
- out >>= 8;
- if (out != 0)
- stats->ratio /= out;
-}
-
-/*
- * Allocate space for a decompressor.
- */
-static void *
-z_decomp_alloc(options, opt_len)
- u_char *options;
- int opt_len;
-{
- struct deflate_state *state;
- int w_size;
-
- if (opt_len != CILEN_DEFLATE || options[0] != CI_DEFLATE
- || options[1] != CILEN_DEFLATE
- || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
- || options[3] != DEFLATE_CHK_SEQUENCE)
- return NULL;
- w_size = DEFLATE_SIZE(options[2]);
- if (w_size < DEFLATE_MIN_SIZE || w_size > DEFLATE_MAX_SIZE)
- return NULL;
-
- state = (struct deflate_state *) malloc(sizeof(*state));
- if (state == NULL)
- return NULL;
-
- state->strm.next_out = NULL;
- state->strm.zalloc = (alloc_func) z_alloc;
- state->strm.zfree = (free_func) z_free;
- if (inflateInit2(&state->strm, -w_size) != Z_OK) {
- free(state);
- return NULL;
- }
-
- state->w_size = w_size;
- memset(&state->stats, 0, sizeof(state->stats));
- return (void *) state;
-}
-
-static void
-z_decomp_free(arg)
- void *arg;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
-
- inflateEnd(&state->strm);
- free(state);
-}
-
-static int
-z_decomp_init(arg, options, opt_len, unit, hdrlen, mru, debug)
- void *arg;
- u_char *options;
- int opt_len, unit, hdrlen, mru, debug;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
-
- if (opt_len < CILEN_DEFLATE || options[0] != CI_DEFLATE
- || options[1] != CILEN_DEFLATE
- || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
- || DEFLATE_SIZE(options[2]) != state->w_size
- || options[3] != DEFLATE_CHK_SEQUENCE)
- return 0;
-
- state->seqno = 0;
- state->unit = unit;
- state->hdrlen = hdrlen;
- state->debug = debug;
- state->mru = mru;
-
- inflateReset(&state->strm);
-
- return 1;
-}
-
-static void
-z_decomp_reset(arg)
- void *arg;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
-
- state->seqno = 0;
- inflateReset(&state->strm);
-}
-
-/*
- * Decompress a Deflate-compressed packet.
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression. For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-z_decompress(arg, mi, inlen, mo, outlenp)
- void *arg;
- u_char *mi, *mo;
- int inlen, *outlenp;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
- u_char *rptr, *wptr;
- int rlen, olen, ospace;
- int seq, i, flush, r, decode_proto;
-
- rptr = mi;
- if (*rptr == 0)
- ++rptr;
- ++rptr;
-
- /* Check the sequence number. */
- seq = (rptr[0] << 8) + rptr[1];
- rptr += 2;
- if (seq != state->seqno) {
-#if !DEFLATE_DEBUG
- if (state->debug)
-#endif
- printf("z_decompress%d: bad seq # %d, expected %d\n",
- state->unit, seq, state->seqno);
- return DECOMP_ERROR;
- }
- ++state->seqno;
-
- /*
- * Set up to call inflate.
- */
- wptr = mo;
- state->strm.next_in = rptr;
- state->strm.avail_in = mi + inlen - rptr;
- rlen = state->strm.avail_in + PPP_HDRLEN + DEFLATE_OVHD;
- state->strm.next_out = wptr;
- state->strm.avail_out = state->mru + 2;
-
- r = inflate(&state->strm, Z_PACKET_FLUSH);
- if (r != Z_OK) {
-#if !DEFLATE_DEBUG
- if (state->debug)
-#endif
- printf("z_decompress%d: inflate returned %d (%s)\n",
- state->unit, r, (state->strm.msg? state->strm.msg: ""));
- return DECOMP_FATALERROR;
- }
- olen = state->mru + 2 - state->strm.avail_out;
- *outlenp = olen;
-
- if ((wptr[0] & 1) != 0)
- ++olen; /* for suppressed protocol high byte */
- olen += 2; /* for address, control */
-
-#if DEFLATE_DEBUG
- if (olen > state->mru + PPP_HDRLEN)
- printf("ppp_deflate%d: exceeded mru (%d > %d)\n",
- state->unit, olen, state->mru + PPP_HDRLEN);
-#endif
-
- state->stats.unc_bytes += olen;
- state->stats.unc_packets++;
- state->stats.comp_bytes += rlen;
- state->stats.comp_packets++;
-
- return DECOMP_OK;
-}
-
-/*
- * Incompressible data has arrived - add it to the history.
- */
-static void
-z_incomp(arg, mi, mlen)
- void *arg;
- u_char *mi;
- int mlen;
-{
- struct deflate_state *state = (struct deflate_state *) arg;
- u_char *rptr;
- int rlen, proto, r;
-
- /*
- * Check that the protocol is one we handle.
- */
- rptr = mi;
- proto = rptr[0];
- if ((proto & 1) == 0)
- proto = (proto << 8) + rptr[1];
- if (proto > 0x3fff || proto == 0xfd || proto == 0xfb)
- return;
-
- ++state->seqno;
-
- if (rptr[0] == 0)
- ++rptr;
- rlen = mi + mlen - rptr;
- state->strm.next_in = rptr;
- state->strm.avail_in = rlen;
- r = inflateIncomp(&state->strm);
- if (r != Z_OK) {
- /* gak! */
-#if !DEFLATE_DEBUG
- if (state->debug)
-#endif
- printf("z_incomp%d: inflateIncomp returned %d (%s)\n",
- state->unit, r, (state->strm.msg? state->strm.msg: ""));
- return;
- }
-
- /*
- * Update stats.
- */
- if (proto <= 0xff)
- ++rlen;
- rlen += 2;
- state->stats.inc_bytes += rlen;
- state->stats.inc_packets++;
- state->stats.unc_bytes += rlen;
- state->stats.unc_packets++;
-}
-
-#endif /* DO_DEFLATE */
diff --git a/mdk-stage1/ppp/pppdump/ppp-comp.h b/mdk-stage1/ppp/pppdump/ppp-comp.h
deleted file mode 100644
index 9221c0db4..000000000
--- a/mdk-stage1/ppp/pppdump/ppp-comp.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS 1 /* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE 1 /* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1 0
-#define DO_PREDICTOR_2 0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-struct compressor {
- int compress_proto; /* CCP compression protocol number */
-
- /* Allocate space for a decompressor (receive side) */
- void *(*decomp_alloc) __P((u_char *options, int opt_len));
- /* Free space used by a decompressor */
- void (*decomp_free) __P((void *state));
- /* Initialize a decompressor */
- int (*decomp_init) __P((void *state, u_char *options, int opt_len,
- int unit, int hdrlen, int mru, int debug));
- /* Reset a decompressor */
- void (*decomp_reset) __P((void *state));
- /* Decompress a packet. */
- int (*decompress) __P((void *state, u_char *mp, int inlen,
- u_char *dmp, int *outlen));
- /* Update state for an incompressible packet received */
- void (*incomp) __P((void *state, u_char *mp, int len));
- /* Return decompression statistics */
- void (*decomp_stat) __P((void *state, struct compstat *stats));
-};
-
-/*
- * Return values for decompress routine.
- * We need to make these distinctions so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression. This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-#define DECOMP_OK 0 /* everything went OK */
-#define DECOMP_ERROR 1 /* error detected before decomp. */
-#define DECOMP_FATALERROR 2 /* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-#define CCP_CONFREQ 1
-#define CCP_CONFACK 2
-#define CCP_CONFNAK 3
-#define CCP_CONFREJ 4
-#define CCP_TERMREQ 5
-#define CCP_TERMACK 6
-#define CCP_RESETREQ 14
-#define CCP_RESETACK 15
-
-/*
- * Max # bytes for a CCP option
- */
-#define CCP_MAX_OPTION_LENGTH 32
-
-/*
- * Parts of a CCP packet.
- */
-#define CCP_CODE(dp) ((dp)[0])
-#define CCP_ID(dp) ((dp)[1])
-#define CCP_LENGTH(dp) (((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN 4
-
-#define CCP_OPT_CODE(dp) ((dp)[0])
-#define CCP_OPT_LENGTH(dp) ((dp)[1])
-#define CCP_OPT_MINLEN 2
-
-/*
- * Definitions for BSD-Compress.
- */
-#define CI_BSD_COMPRESS 21 /* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS 3 /* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x) ((x) & 0x1F) /* number of bits requested */
-#define BSD_VERSION(x) ((x) >> 5) /* version of option format */
-#define BSD_CURRENT_VERSION 1 /* current version number */
-#define BSD_MAKE_OPT(v, n) (((v) << 5) | (n))
-
-#define BSD_MIN_BITS 9 /* smallest code size supported */
-#define BSD_MAX_BITS 15 /* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-#define CI_DEFLATE 26 /* config option for Deflate */
-#define CI_DEFLATE_DRAFT 24 /* value used in original draft RFC */
-#define CILEN_DEFLATE 4 /* length of its config option */
-
-#define DEFLATE_MIN_SIZE 8
-#define DEFLATE_MAX_SIZE 15
-#define DEFLATE_METHOD_VAL 8
-#define DEFLATE_SIZE(x) (((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x) ((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w) ((((w) - DEFLATE_MIN_SIZE) << 4) \
- + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE 0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-#define CI_PREDICTOR_1 1 /* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1 2 /* length of its config option */
-#define CI_PREDICTOR_2 2 /* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2 2 /* length of its config option */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/mdk-stage1/ppp/pppdump/pppdump.8 b/mdk-stage1/ppp/pppdump/pppdump.8
deleted file mode 100644
index c0172f519..000000000
--- a/mdk-stage1/ppp/pppdump/pppdump.8
+++ /dev/null
@@ -1,62 +0,0 @@
-.\" @(#) $Id$
-.TH PPPDUMP 8 "1 April 1999"
-.SH NAME
-pppdump \- convert PPP record file to readable format
-.SH SYNOPSIS
-.B pppdump
-[
-.B -h
-|
-.B -p
-[
-.B -d
-]] [
-.B -r
-] [
-.B -m \fImru
-] [
-.I file \fR...
-]
-.ti 12
-.SH DESCRIPTION
-The
-.B pppdump
-utility converts the files written using the \fIrecord\fR option of
-.B pppd
-into a human-readable format. If one or more filenames are specified,
-.B pppdump
-will read each in turn; otherwise it will read its standard input. In
-each case the result is written to standard output.
-.PP
-The options are as follows:
-.TP
-.B -h
-Prints the bytes sent and received in hexadecimal. If neither this
-option nor the \fB-p\fR option is specified, the bytes are printed as
-the characters themselves, with non-printing and non-ASCII characters
-printed as escape sequences.
-.TP
-.B -p
-Collects the bytes sent and received into PPP packets, interpreting
-the async HDLC framing and escape characters and checking the FCS
-(frame check sequence) of each packet. The packets are printed as hex
-values and as characters (non-printable characters are printed as
-`.').
-.TP
-.B -d
-With the \fB-p\fR option, this option causes
-.B pppdump
-to decompress packets which have been compressed with the BSD-Compress
-or Deflate methods.
-.TP
-.B -r
-Reverses the direction indicators, so that `sent' is printed for
-bytes or packets received, and `rcvd' is printed for bytes or packets
-sent.
-.TP
-.B -m \fImru
-Use \fImru\fR as the MRU (maximum receive unit) for both directions of
-the link when checking for over-length PPP packets (with the \fB-p\fR
-option).
-.SH SEE ALSO
-pppd(8)
diff --git a/mdk-stage1/ppp/pppdump/pppdump.c b/mdk-stage1/ppp/pppdump/pppdump.c
deleted file mode 100644
index a8e69d4bf..000000000
--- a/mdk-stage1/ppp/pppdump/pppdump.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * pppdump - print out the contents of a record file generated by
- * pppd in readable form.
- *
- * Copyright (C) 1999 Paul Mackerras. All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms. The name of the author
- * may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#include <stdio.h>
-#include <unistd.h>
-#include <time.h>
-#include <sys/types.h>
-#include "ppp_defs.h"
-#include "ppp-comp.h"
-
-int hexmode;
-int pppmode;
-int reverse;
-int decompress;
-int mru = 1500;
-int abs_times;
-time_t start_time;
-int start_time_tenths;
-int tot_sent, tot_rcvd;
-
-extern int optind;
-extern char *optarg;
-
-main(ac, av)
- int ac;
- char **av;
-{
- int i;
- char *p;
- FILE *f;
-
- while ((i = getopt(ac, av, "hprdm:a")) != -1) {
- switch (i) {
- case 'h':
- hexmode = 1;
- break;
- case 'p':
- pppmode = 1;
- break;
- case 'r':
- reverse = 1;
- break;
- case 'd':
- decompress = 1;
- break;
- case 'm':
- mru = atoi(optarg);
- break;
- case 'a':
- abs_times = 1;
- break;
- default:
- fprintf(stderr, "Usage: %s [-h | -p[d]] [-r] [-m mru] [-a] [file ...]\n", av[0]);
- exit(1);
- }
- }
- if (optind >= ac)
- dumplog(stdin);
- else {
- for (i = optind; i < ac; ++i) {
- p = av[i];
- if ((f = fopen(p, "r")) == NULL) {
- perror(p);
- exit(1);
- }
- if (pppmode)
- dumpppp(f);
- else
- dumplog(f);
- fclose(f);
- }
- }
- exit(0);
-}
-
-dumplog(f)
- FILE *f;
-{
- int c, n, k, col;
- int nb, c2;
- unsigned char buf[16];
-
- while ((c = getc(f)) != EOF) {
- switch (c) {
- case 1:
- case 2:
- if (reverse)
- c = 3 - c;
- printf("%s %c", c==1? "sent": "rcvd", hexmode? ' ': '"');
- col = 6;
- n = getc(f);
- n = (n << 8) + getc(f);
- *(c==1? &tot_sent: &tot_rcvd) += n;
- nb = 0;
- for (; n > 0; --n) {
- c = getc(f);
- if (c == EOF) {
- printf("\nEOF\n");
- exit(0);
- }
- if (hexmode) {
- if (nb >= 16) {
- printf(" ");
- for (k = 0; k < nb; ++k) {
- c2 = buf[k];
- putchar((' ' <= c2 && c2 <= '~')? c2: '.');
- }
- printf("\n ");
- nb = 0;
- }
- buf[nb++] = c;
- printf(" %.2x", c);
- } else {
- k = (' ' <= c && c <= '~')? (c != '\\' && c != '"')? 1: 2: 3;
- if ((col += k) >= 78) {
- printf("\n ");
- col = 6 + k;
- }
- switch (k) {
- case 1:
- putchar(c);
- break;
- case 2:
- printf("\\%c", c);
- break;
- case 3:
- printf("\\%.2x", c);
- break;
- }
- }
- }
- if (hexmode) {
- for (k = nb; k < 16; ++k)
- printf(" ");
- printf(" ");
- for (k = 0; k < nb; ++k) {
- c2 = buf[k];
- putchar((' ' <= c2 && c2 <= '~')? c2: '.');
- }
- } else
- putchar('"');
- printf("\n");
- break;
- case 3:
- case 4:
- printf("end %s\n", c==3? "send": "recv");
- break;
- case 5:
- case 6:
- case 7:
- show_time(f, c);
- break;
- default:
- printf("?%.2x\n");
- }
- }
-}
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
- 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
- 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
- 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
- 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
- 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
- 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
- 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
- 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
- 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
- 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
- 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
- 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
- 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
- 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
- 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
- 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
- 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
- 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
- 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
- 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
- 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
- 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
- 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
- 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
- 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
- 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
- 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
- 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
- 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
- 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
- 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
- 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-struct pkt {
- int cnt;
- int esc;
- int flags;
- struct compressor *comp;
- void *state;
- unsigned char buf[8192];
-} spkt, rpkt;
-
-/* Values for flags */
-#define CCP_ISUP 1
-#define CCP_ERROR 2
-#define CCP_FATALERROR 4
-#define CCP_ERR (CCP_ERROR | CCP_FATALERROR)
-#define CCP_DECOMP_RUN 8
-
-unsigned char dbuf[8192];
-
-dumpppp(f)
- FILE *f;
-{
- int c, n, k;
- int nb, nl, dn, proto, rv;
- char *dir, *q;
- unsigned char *p, *r, *endp;
- unsigned char *d;
- unsigned short fcs;
- struct pkt *pkt;
-
- spkt.cnt = rpkt.cnt = 0;
- spkt.esc = rpkt.esc = 0;
- while ((c = getc(f)) != EOF) {
- switch (c) {
- case 1:
- case 2:
- if (reverse)
- c = 3 - c;
- dir = c==1? "sent": "rcvd";
- pkt = c==1? &spkt: &rpkt;
- n = getc(f);
- n = (n << 8) + getc(f);
- *(c==1? &tot_sent: &tot_rcvd) += n;
- for (; n > 0; --n) {
- c = getc(f);
- switch (c) {
- case EOF:
- printf("\nEOF\n");
- if (spkt.cnt > 0)
- printf("[%d bytes in incomplete send packet]\n",
- spkt.cnt);
- if (rpkt.cnt > 0)
- printf("[%d bytes in incomplete recv packet]\n",
- rpkt.cnt);
- exit(0);
- case '~':
- if (pkt->cnt > 0) {
- q = dir;
- if (pkt->esc) {
- printf("%s aborted packet:\n ", dir);
- q = " ";
- }
- nb = pkt->cnt;
- p = pkt->buf;
- pkt->cnt = 0;
- pkt->esc = 0;
- if (nb <= 2) {
- printf("%s short packet [%d bytes]:", q, nb);
- for (k = 0; k < nb; ++k)
- printf(" %.2x", p[k]);
- printf("\n");
- break;
- }
- fcs = PPP_INITFCS;
- for (k = 0; k < nb; ++k)
- fcs = PPP_FCS(fcs, p[k]);
- fcs &= 0xFFFF;
- nb -= 2;
- endp = p + nb;
- r = p;
- if (r[0] == 0xff && r[1] == 3)
- r += 2;
- if ((r[0] & 1) == 0)
- ++r;
- ++r;
- if (endp - r > mru)
- printf(" ERROR: length (%d) > MRU (%d)\n",
- endp - r, mru);
- if (decompress && fcs == PPP_GOODFCS) {
- /* See if this is a CCP or compressed packet */
- d = dbuf;
- r = p;
- if (r[0] == 0xff && r[1] == 3) {
- *d++ = *r++;
- *d++ = *r++;
- }
- proto = r[0];
- if ((proto & 1) == 0)
- proto = (proto << 8) + r[1];
- if (proto == PPP_CCP) {
- handle_ccp(pkt, r + 2, endp - r - 2);
- } else if (proto == PPP_COMP) {
- if ((pkt->flags & CCP_ISUP)
- && (pkt->flags & CCP_DECOMP_RUN)
- && pkt->state
- && (pkt->flags & CCP_ERR) == 0) {
- rv = pkt->comp->decompress(pkt->state, r,
- endp - r, d, &dn);
- switch (rv) {
- case DECOMP_OK:
- p = dbuf;
- nb = d + dn - p;
- if ((d[0] & 1) == 0)
- --dn;
- --dn;
- if (dn > mru)
- printf(" ERROR: decompressed length (%d) > MRU (%d)\n", dn, mru);
- break;
- case DECOMP_ERROR:
- printf(" DECOMPRESSION ERROR\n");
- pkt->flags |= CCP_ERROR;
- break;
- case DECOMP_FATALERROR:
- printf(" FATAL DECOMPRESSION ERROR\n");
- pkt->flags |= CCP_FATALERROR;
- break;
- }
- }
- } else if (pkt->state
- && (pkt->flags & CCP_DECOMP_RUN)) {
- pkt->comp->incomp(pkt->state, r, endp - r);
- }
- }
- do {
- nl = nb < 16? nb: 16;
- printf("%s ", q);
- for (k = 0; k < nl; ++k)
- printf(" %.2x", p[k]);
- for (; k < 16; ++k)
- printf(" ");
- printf(" ");
- for (k = 0; k < nl; ++k) {
- c = p[k];
- putchar((' ' <= c && c <= '~')? c: '.');
- }
- printf("\n");
- q = " ";
- p += nl;
- nb -= nl;
- } while (nb > 0);
- if (fcs != PPP_GOODFCS)
- printf(" BAD FCS: (residue = %x)\n", fcs);
- }
- break;
- case '}':
- if (!pkt->esc) {
- pkt->esc = 1;
- break;
- }
- /* else fall through */
- default:
- if (pkt->esc) {
- c ^= 0x20;
- pkt->esc = 0;
- }
- pkt->buf[pkt->cnt++] = c;
- break;
- }
- }
- break;
- case 3:
- case 4:
- if (reverse)
- c = 7 - c;
- dir = c==3? "send": "recv";
- pkt = c==3? &spkt: &rpkt;
- printf("end %s", dir);
- if (pkt->cnt > 0)
- printf(" [%d bytes in incomplete packet]", pkt->cnt);
- printf("\n");
- break;
- case 5:
- case 6:
- case 7:
- show_time(f, c);
- break;
- default:
- printf("?%.2x\n");
- }
- }
-}
-
-extern struct compressor ppp_bsd_compress, ppp_deflate;
-
-struct compressor *compressors[] = {
-#if DO_BSD_COMPRESS
- &ppp_bsd_compress,
-#endif
-#if DO_DEFLATE
- &ppp_deflate,
-#endif
- NULL
-};
-
-handle_ccp(cp, dp, len)
- struct pkt *cp;
- u_char *dp;
- int len;
-{
- int clen;
- struct compressor **comp;
-
- if (len < CCP_HDRLEN)
- return;
- clen = CCP_LENGTH(dp);
- if (clen > len)
- return;
-
- switch (CCP_CODE(dp)) {
- case CCP_CONFACK:
- cp->flags &= ~(CCP_DECOMP_RUN | CCP_ISUP);
- if (clen < CCP_HDRLEN + CCP_OPT_MINLEN
- || clen < CCP_HDRLEN + CCP_OPT_LENGTH(dp + CCP_HDRLEN))
- break;
- dp += CCP_HDRLEN;
- clen -= CCP_HDRLEN;
- for (comp = compressors; *comp != NULL; ++comp) {
- if ((*comp)->compress_proto == dp[0]) {
- if (cp->state != NULL) {
- (*cp->comp->decomp_free)(cp->state);
- cp->state = NULL;
- }
- cp->comp = *comp;
- cp->state = (*comp)->decomp_alloc(dp, CCP_OPT_LENGTH(dp));
- cp->flags |= CCP_ISUP;
- if (cp->state != NULL
- && (*cp->comp->decomp_init)
- (cp->state, dp, clen, 0, 0, 8192, 1))
- cp->flags = (cp->flags & ~CCP_ERR) | CCP_DECOMP_RUN;
- break;
- }
- }
- break;
-
- case CCP_CONFNAK:
- case CCP_CONFREJ:
- cp->flags &= ~(CCP_DECOMP_RUN | CCP_ISUP);
- break;
-
- case CCP_RESETACK:
- if (cp->flags & CCP_ISUP) {
- if (cp->state && (cp->flags & CCP_DECOMP_RUN)) {
- (*cp->comp->decomp_reset)(cp->state);
- cp->flags &= ~CCP_ERROR;
- }
- }
- break;
- }
-}
-
-show_time(f, c)
- FILE *f;
- int c;
-{
- time_t t;
- int n;
- struct tm *tm;
-
- if (c == 7) {
- t = getc(f);
- t = (t << 8) + getc(f);
- t = (t << 8) + getc(f);
- t = (t << 8) + getc(f);
- printf("start %s", ctime(&t));
- start_time = t;
- start_time_tenths = 0;
- tot_sent = tot_rcvd = 0;
- } else {
- n = getc(f);
- if (c == 5) {
- for (c = 3; c > 0; --c)
- n = (n << 8) + getc(f);
- }
- if (abs_times) {
- n += start_time_tenths;
- start_time += n / 10;
- start_time_tenths = n % 10;
- tm = localtime(&start_time);
- printf("time %.2d:%.2d:%.2d.%d", tm->tm_hour, tm->tm_min,
- tm->tm_sec, start_time_tenths);
- printf(" (sent %d, rcvd %d)\n", tot_sent, tot_rcvd);
- } else
- printf("time %.1fs\n", (double) n / 10);
- }
-}
diff --git a/mdk-stage1/ppp/pppdump/zlib.c b/mdk-stage1/ppp/pppdump/zlib.c
deleted file mode 100644
index 5b8372719..000000000
--- a/mdk-stage1/ppp/pppdump/zlib.c
+++ /dev/null
@@ -1,4614 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets. See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - changed functions not used outside this file to "local"
- * - added minCompression parameter to deflateInit2
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp
- *
- * $Id$
- */
-
-
-/*+++++*/
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */
-
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#ifdef STDC
-# include <string.h>
-#endif
-
-#ifndef local
-# define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-#define FAR
-
-typedef unsigned char uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long ulg;
-
-extern char *z_errmsg[]; /* indexed by 1-zlib_error */
-
-#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err)
-/* To be used only when the state is known to be valid */
-
-#ifndef NULL
-#define NULL ((void *) 0)
-#endif
-
- /* common constants */
-
-#define DEFLATED 8
-
-#ifndef DEF_WBITS
-# define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-# define DEF_MEM_LEVEL 8
-#else
-# define DEF_MEM_LEVEL MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES 2
-/* The three kinds of block type */
-
-#define MIN_MATCH 3
-#define MAX_MATCH 258
-/* The minimum and maximum match lengths */
-
- /* functions */
-
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-# define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-# define zmemcpy memcpy
-# define zmemzero(dest, len) memset(dest, 0, len)
-#else
-# define zmemcpy(d, s, n) bcopy((s), (d), (n))
-# define zmemzero bzero
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-# include <stdio.h>
-# ifndef verbose
-# define verbose 0
-# endif
-# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len));
-
-/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */
-/* void zcfree OF((voidpf opaque, voidpf ptr)); */
-
-#define ZALLOC(strm, items, size) \
- (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr, size) \
- (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size))
-#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);}
-
-/* deflate.h -- internal compression state
- * Copyright (C) 1995 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-
-/*+++++*/
-/* From: deflate.h,v 1.5 1995/05/03 17:27:09 jloup Exp */
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-/* Data type */
-#define BINARY 0
-#define ASCII 1
-#define UNKNOWN 2
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS 256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES 30
-/* number of distance codes */
-
-#define BL_CODES 19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE 42
-#define BUSY_STATE 113
-#define FLUSH_STATE 124
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
- union {
- ush freq; /* frequency count */
- ush code; /* bit string */
- } fc;
- union {
- ush dad; /* father node in Huffman tree */
- ush len; /* length of bit string */
- } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad dl.dad
-#define Len dl.len
-
-typedef struct static_tree_desc_s static_tree_desc;
-
-typedef struct tree_desc_s {
- ct_data *dyn_tree; /* the dynamic tree */
- int max_code; /* largest code with non zero frequency */
- static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct deflate_state {
- z_stream *strm; /* pointer back to this zlib stream */
- int status; /* as the name implies */
- Bytef *pending_buf; /* output still pending */
- Bytef *pending_out; /* next pending byte to output to the stream */
- int pending; /* nb of bytes in the pending buffer */
- uLong adler; /* adler32 of uncompressed data */
- int noheader; /* suppress zlib header and adler32 */
- Byte data_type; /* UNKNOWN, BINARY or ASCII */
- Byte method; /* STORED (for zip only) or DEFLATED */
- int minCompr; /* min size decrease for Z_FLUSH_NOSTORE */
-
- /* used by deflate.c: */
-
- uInt w_size; /* LZ77 window size (32K by default) */
- uInt w_bits; /* log2(w_size) (8..16) */
- uInt w_mask; /* w_size - 1 */
-
- Bytef *window;
- /* Sliding window. Input bytes are read into the second half of the window,
- * and move to the first half later to keep a dictionary of at least wSize
- * bytes. With this organization, matches are limited to a distance of
- * wSize-MAX_MATCH bytes, but this ensures that IO is always
- * performed with a length multiple of the block size. Also, it limits
- * the window size to 64K, which is quite useful on MSDOS.
- * To do: use the user input buffer as sliding window.
- */
-
- ulg window_size;
- /* Actual size of window: 2*wSize, except when the user input buffer
- * is directly used as sliding window.
- */
-
- Posf *prev;
- /* Link to older string with same hash index. To limit the size of this
- * array to 64K, this link is maintained only for the last 32K strings.
- * An index in this array is thus a window index modulo 32K.
- */
-
- Posf *head; /* Heads of the hash chains or NIL. */
-
- uInt ins_h; /* hash index of string to be inserted */
- uInt hash_size; /* number of elements in hash table */
- uInt hash_bits; /* log2(hash_size) */
- uInt hash_mask; /* hash_size-1 */
-
- uInt hash_shift;
- /* Number of bits by which ins_h must be shifted at each input
- * step. It must be such that after MIN_MATCH steps, the oldest
- * byte no longer takes part in the hash key, that is:
- * hash_shift * MIN_MATCH >= hash_bits
- */
-
- long block_start;
- /* Window position at the beginning of the current output block. Gets
- * negative when the window is moved backwards.
- */
-
- uInt match_length; /* length of best match */
- IPos prev_match; /* previous match */
- int match_available; /* set if previous match exists */
- uInt strstart; /* start of string to insert */
- uInt match_start; /* start of matching string */
- uInt lookahead; /* number of valid bytes ahead in window */
-
- uInt prev_length;
- /* Length of the best match at previous step. Matches not greater than this
- * are discarded. This is used in the lazy match evaluation.
- */
-
- uInt max_chain_length;
- /* To speed up deflation, hash chains are never searched beyond this
- * length. A higher limit improves compression ratio but degrades the
- * speed.
- */
-
- uInt max_lazy_match;
- /* Attempt to find a better match only when the current match is strictly
- * smaller than this value. This mechanism is used only for compression
- * levels >= 4.
- */
-# define max_insert_length max_lazy_match
- /* Insert new strings in the hash table only if the match length is not
- * greater than this length. This saves time but degrades compression.
- * max_insert_length is used only for compression levels <= 3.
- */
-
- int level; /* compression level (1..9) */
- int strategy; /* favor or force Huffman coding*/
-
- uInt good_match;
- /* Use a faster search when the previous match is longer than this */
-
- int nice_match; /* Stop searching when current match exceeds this */
-
- /* used by trees.c: */
- /* Didn't use ct_data typedef below to supress compiler warning */
- struct ct_data_s dyn_ltree[HEAP_SIZE]; /* literal and length tree */
- struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
- struct ct_data_s bl_tree[2*BL_CODES+1]; /* Huffman tree for bit lengths */
-
- struct tree_desc_s l_desc; /* desc. for literal tree */
- struct tree_desc_s d_desc; /* desc. for distance tree */
- struct tree_desc_s bl_desc; /* desc. for bit length tree */
-
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */
- int heap_len; /* number of elements in the heap */
- int heap_max; /* element of largest frequency */
- /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
- * The same heap array is used to build all trees.
- */
-
- uch depth[2*L_CODES+1];
- /* Depth of each subtree used as tie breaker for trees of equal frequency
- */
-
- uchf *l_buf; /* buffer for literals or lengths */
-
- uInt lit_bufsize;
- /* Size of match buffer for literals/lengths. There are 4 reasons for
- * limiting lit_bufsize to 64K:
- * - frequencies can be kept in 16 bit counters
- * - if compression is not successful for the first block, all input
- * data is still in the window so we can still emit a stored block even
- * when input comes from standard input. (This can also be done for
- * all blocks if lit_bufsize is not greater than 32K.)
- * - if compression is not successful for a file smaller than 64K, we can
- * even emit a stored file instead of a stored block (saving 5 bytes).
- * This is applicable only for zip (not gzip or zlib).
- * - creating new Huffman trees less frequently may not provide fast
- * adaptation to changes in the input data statistics. (Take for
- * example a binary file with poorly compressible code followed by
- * a highly compressible string table.) Smaller buffer sizes give
- * fast adaptation but have of course the overhead of transmitting
- * trees more frequently.
- * - I can't count above 4
- */
-
- uInt last_lit; /* running index in l_buf */
-
- ushf *d_buf;
- /* Buffer for distances. To simplify the code, d_buf and l_buf have
- * the same number of elements. To use different lengths, an extra flag
- * array would be necessary.
- */
-
- ulg opt_len; /* bit length of current block with optimal trees */
- ulg static_len; /* bit length of current block with static trees */
- ulg compressed_len; /* total bit length of compressed file */
- uInt matches; /* number of string matches in current block */
- int last_eob_len; /* bit length of EOB code for last block */
-
-#ifdef DEBUG_ZLIB
- ulg bits_sent; /* bit length of the compressed data */
-#endif
-
- ush bi_buf;
- /* Output buffer. bits are inserted starting at the bottom (least
- * significant bits).
- */
- int bi_valid;
- /* Number of valid bits in bi_buf. All bits above the last valid bit
- * are always zero.
- */
-
- uInt blocks_in_packet;
- /* Number of blocks produced since the last time Z_PACKET_FLUSH
- * was used.
- */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s) ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
- /* in trees.c */
-local void ct_init OF((deflate_state *s));
-local int ct_tally OF((deflate_state *s, int dist, int lc));
-local ulg ct_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int flush));
-local void ct_align OF((deflate_state *s));
-local void ct_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-local void ct_stored_type_only OF((deflate_state *s));
-
-
-/*+++++*/
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * ALGORITHM
- *
- * The "deflation" process depends on being able to identify portions
- * of the input text which are identical to earlier input (within a
- * sliding window trailing behind the input currently being processed).
- *
- * The most straightforward technique turns out to be the fastest for
- * most input files: try all possible matches and select the longest.
- * The key feature of this algorithm is that insertions into the string
- * dictionary are very simple and thus fast, and deletions are avoided
- * completely. Insertions are performed at each input character, whereas
- * string matches are performed only when the previous match ends. So it
- * is preferable to spend more time in matches to allow very fast string
- * insertions and avoid deletions. The matching algorithm for small
- * strings is inspired from that of Rabin & Karp. A brute force approach
- * is used to find longer strings when a small match has been found.
- * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- * (by Leonid Broukhis).
- * A previous version of this file used a more sophisticated algorithm
- * (by Fiala and Greene) which is guaranteed to run in linear amortized
- * time, but has a larger average cost, uses more memory and is patented.
- * However the F&G algorithm may be faster for some highly redundant
- * files if the parameter max_chain_length (described below) is too large.
- *
- * ACKNOWLEDGEMENTS
- *
- * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- * I found it in 'freeze' written by Leonid Broukhis.
- * Thanks to many people for bug reports and testing.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- * A description of the Rabin and Karp algorithm is given in the book
- * "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- * Fiala,E.R., and Greene,D.H.
- * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* From: deflate.c,v 1.8 1995/05/03 17:27:08 jloup Exp */
-
-local char zlib_copyright[] = " deflate Copyright 1995 Jean-loup Gailly ";
-/*
- If you use the zlib library in a product, an acknowledgment is welcome
- in the documentation of your product. If for some reason you cannot
- include such an acknowledgment, I would appreciate that you keep this
- copyright string in the executable of your product.
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-# define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-
-typedef struct config_s {
- ush good_length; /* reduce lazy search above this match length */
- ush max_lazy; /* do not perform lazy search above this match length */
- ush nice_length; /* quit search above this match length */
- ush max_chain;
-} config;
-
-local config configuration_table[10] = {
-/* good lazy nice chain */
-/* 0 */ {0, 0, 0, 0}, /* store only */
-/* 1 */ {4, 4, 8, 4}, /* maximum speed, no lazy matches */
-/* 2 */ {4, 5, 16, 8},
-/* 3 */ {4, 6, 32, 32},
-
-/* 4 */ {4, 4, 16, 16}, /* lazy matches */
-/* 5 */ {8, 16, 32, 32},
-/* 6 */ {8, 16, 128, 128},
-/* 7 */ {8, 32, 128, 256},
-/* 8 */ {32, 128, 258, 1024},
-/* 9 */ {32, 258, 258, 4096}}; /* maximum compression */
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-/* ===========================================================================
- * Prototypes for local functions.
- */
-
-local void fill_window OF((deflate_state *s));
-local int deflate_fast OF((deflate_state *s, int flush));
-local int deflate_slow OF((deflate_state *s, int flush));
-local void lm_init OF((deflate_state *s));
-local int longest_match OF((deflate_state *s, IPos cur_match));
-local void putShortMSB OF((deflate_state *s, uInt b));
-local void flush_pending OF((z_stream *strm));
-local int read_buf OF((z_stream *strm, charf *buf, unsigned size));
-#ifdef ASMV
- void match_init OF((void)); /* asm code initialization */
-#endif
-
-#ifdef DEBUG_ZLIB
-local void check_match OF((deflate_state *s, IPos start, IPos match,
- int length));
-#endif
-
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN assertion: all calls to to UPDATE_HASH are made with consecutive
- * input characters, so that a running hash key can be computed from the
- * previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * IN assertion: all calls to to INSERT_STRING are made with consecutive
- * input characters and the first MIN_MATCH bytes of str are valid
- * (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#define INSERT_STRING(s, str, match_head) \
- (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
- s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
- s->head[s->ins_h] = (str))
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
- s->head[s->hash_size-1] = NIL; \
- zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int deflateInit (strm, level)
- z_stream *strm;
- int level;
-{
- return deflateInit2 (strm, level, DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
- 0, 0);
- /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int deflateInit2 (strm, level, method, windowBits, memLevel,
- strategy, minCompression)
- z_stream *strm;
- int level;
- int method;
- int windowBits;
- int memLevel;
- int strategy;
- int minCompression;
-{
- deflate_state *s;
- int noheader = 0;
-
- if (strm == Z_NULL) return Z_STREAM_ERROR;
-
- strm->msg = Z_NULL;
-/* if (strm->zalloc == Z_NULL) strm->zalloc = zcalloc; */
-/* if (strm->zfree == Z_NULL) strm->zfree = zcfree; */
-
- if (level == Z_DEFAULT_COMPRESSION) level = 6;
-
- if (windowBits < 0) { /* undocumented feature: suppress zlib header */
- noheader = 1;
- windowBits = -windowBits;
- }
- if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != DEFLATED ||
- windowBits < 8 || windowBits > 15 || level < 1 || level > 9) {
- return Z_STREAM_ERROR;
- }
- s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
- if (s == Z_NULL) return Z_MEM_ERROR;
- strm->state = (struct internal_state FAR *)s;
- s->strm = strm;
-
- s->noheader = noheader;
- s->w_bits = windowBits;
- s->w_size = 1 << s->w_bits;
- s->w_mask = s->w_size - 1;
-
- s->hash_bits = memLevel + 7;
- s->hash_size = 1 << s->hash_bits;
- s->hash_mask = s->hash_size - 1;
- s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
- s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
- s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
- s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
-
- s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
- s->pending_buf = (uchf *) ZALLOC(strm, s->lit_bufsize, 2*sizeof(ush));
-
- if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
- s->pending_buf == Z_NULL) {
- strm->msg = z_errmsg[1-Z_MEM_ERROR];
- deflateEnd (strm);
- return Z_MEM_ERROR;
- }
- s->d_buf = (ushf *) &(s->pending_buf[s->lit_bufsize]);
- s->l_buf = (uchf *) &(s->pending_buf[3*s->lit_bufsize]);
- /* We overlay pending_buf and d_buf+l_buf. This works since the average
- * output size for (length,distance) codes is <= 32 bits (worst case
- * is 15+15+13=33).
- */
-
- s->level = level;
- s->strategy = strategy;
- s->method = (Byte)method;
- s->minCompr = minCompression;
- s->blocks_in_packet = 0;
-
- return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int deflateReset (strm)
- z_stream *strm;
-{
- deflate_state *s;
-
- if (strm == Z_NULL || strm->state == Z_NULL ||
- strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
-
- strm->total_in = strm->total_out = 0;
- strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
- strm->data_type = Z_UNKNOWN;
-
- s = (deflate_state *)strm->state;
- s->pending = 0;
- s->pending_out = s->pending_buf;
-
- if (s->noheader < 0) {
- s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
- }
- s->status = s->noheader ? BUSY_STATE : INIT_STATE;
- s->adler = 1;
-
- ct_init(s);
- lm_init(s);
-
- return Z_OK;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
- deflate_state *s;
- uInt b;
-{
- put_byte(s, (Byte)(b >> 8));
- put_byte(s, (Byte)(b & 0xff));
-}
-
-/* =========================================================================
- * Flush as much pending output as possible.
- */
-local void flush_pending(strm)
- z_stream *strm;
-{
- deflate_state *state = (deflate_state *) strm->state;
- unsigned len = state->pending;
-
- if (len > strm->avail_out) len = strm->avail_out;
- if (len == 0) return;
-
- if (strm->next_out != NULL) {
- zmemcpy(strm->next_out, state->pending_out, len);
- strm->next_out += len;
- }
- state->pending_out += len;
- strm->total_out += len;
- strm->avail_out -= len;
- state->pending -= len;
- if (state->pending == 0) {
- state->pending_out = state->pending_buf;
- }
-}
-
-/* ========================================================================= */
-int deflate (strm, flush)
- z_stream *strm;
- int flush;
-{
- deflate_state *state = (deflate_state *) strm->state;
-
- if (strm == Z_NULL || state == Z_NULL) return Z_STREAM_ERROR;
-
- if (strm->next_in == Z_NULL && strm->avail_in != 0) {
- ERR_RETURN(strm, Z_STREAM_ERROR);
- }
- if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
- state->strm = strm; /* just in case */
-
- /* Write the zlib header */
- if (state->status == INIT_STATE) {
-
- uInt header = (DEFLATED + ((state->w_bits-8)<<4)) << 8;
- uInt level_flags = (state->level-1) >> 1;
-
- if (level_flags > 3) level_flags = 3;
- header |= (level_flags << 6);
- header += 31 - (header % 31);
-
- state->status = BUSY_STATE;
- putShortMSB(state, header);
- }
-
- /* Flush as much pending output as possible */
- if (state->pending != 0) {
- flush_pending(strm);
- if (strm->avail_out == 0) return Z_OK;
- }
-
- /* If we came back in here to get the last output from
- * a previous flush, we're done for now.
- */
- if (state->status == FLUSH_STATE) {
- state->status = BUSY_STATE;
- if (flush != Z_NO_FLUSH && flush != Z_FINISH)
- return Z_OK;
- }
-
- /* User must not provide more input after the first FINISH: */
- if (state->status == FINISH_STATE && strm->avail_in != 0) {
- ERR_RETURN(strm, Z_BUF_ERROR);
- }
-
- /* Start a new block or continue the current one.
- */
- if (strm->avail_in != 0 || state->lookahead != 0 ||
- (flush == Z_FINISH && state->status != FINISH_STATE)) {
- int quit;
-
- if (flush == Z_FINISH) {
- state->status = FINISH_STATE;
- }
- if (state->level <= 3) {
- quit = deflate_fast(state, flush);
- } else {
- quit = deflate_slow(state, flush);
- }
- if (quit || strm->avail_out == 0)
- return Z_OK;
- /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
- * of deflate should use the same flush parameter to make sure
- * that the flush is complete. So we don't have to output an
- * empty block here, this will be done at next call. This also
- * ensures that for a very small output buffer, we emit at most
- * one empty block.
- */
- }
-
- /* If a flush was requested, we have a little more to output now. */
- if (flush != Z_NO_FLUSH && flush != Z_FINISH
- && state->status != FINISH_STATE) {
- switch (flush) {
- case Z_PARTIAL_FLUSH:
- ct_align(state);
- break;
- case Z_PACKET_FLUSH:
- /* Output just the 3-bit `stored' block type value,
- but not a zero length. */
- ct_stored_type_only(state);
- break;
- default:
- ct_stored_block(state, (char*)0, 0L, 0);
- /* For a full flush, this empty block will be recognized
- * as a special marker by inflate_sync().
- */
- if (flush == Z_FULL_FLUSH) {
- CLEAR_HASH(state); /* forget history */
- }
- }
- flush_pending(strm);
- if (strm->avail_out == 0) {
- /* We'll have to come back to get the rest of the output;
- * this ensures we don't output a second zero-length stored
- * block (or whatever).
- */
- state->status = FLUSH_STATE;
- return Z_OK;
- }
- }
-
- Assert(strm->avail_out > 0, "bug2");
-
- if (flush != Z_FINISH) return Z_OK;
- if (state->noheader) return Z_STREAM_END;
-
- /* Write the zlib trailer (adler32) */
- putShortMSB(state, (uInt)(state->adler >> 16));
- putShortMSB(state, (uInt)(state->adler & 0xffff));
- flush_pending(strm);
- /* If avail_out is zero, the application will call deflate again
- * to flush the rest.
- */
- state->noheader = -1; /* write the trailer only once! */
- return state->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int deflateEnd (strm)
- z_stream *strm;
-{
- deflate_state *state = (deflate_state *) strm->state;
-
- if (strm == Z_NULL || state == Z_NULL) return Z_STREAM_ERROR;
-
- TRY_FREE(strm, state->window, state->w_size * 2 * sizeof(Byte));
- TRY_FREE(strm, state->prev, state->w_size * sizeof(Pos));
- TRY_FREE(strm, state->head, state->hash_size * sizeof(Pos));
- TRY_FREE(strm, state->pending_buf, state->lit_bufsize * 2 * sizeof(ush));
-
- ZFREE(strm, state, sizeof(deflate_state));
- strm->state = Z_NULL;
-
- return Z_OK;
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.
- */
-local int read_buf(strm, buf, size)
- z_stream *strm;
- charf *buf;
- unsigned size;
-{
- unsigned len = strm->avail_in;
- deflate_state *state = (deflate_state *) strm->state;
-
- if (len > size) len = size;
- if (len == 0) return 0;
-
- strm->avail_in -= len;
-
- if (!state->noheader) {
- state->adler = adler32(state->adler, strm->next_in, len);
- }
- zmemcpy(buf, strm->next_in, len);
- strm->next_in += len;
- strm->total_in += len;
-
- return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
- deflate_state *s;
-{
- s->window_size = (ulg)2L*s->w_size;
-
- CLEAR_HASH(s);
-
- /* Set the default configuration parameters:
- */
- s->max_lazy_match = configuration_table[s->level].max_lazy;
- s->good_match = configuration_table[s->level].good_length;
- s->nice_match = configuration_table[s->level].nice_length;
- s->max_chain_length = configuration_table[s->level].max_chain;
-
- s->strstart = 0;
- s->block_start = 0L;
- s->lookahead = 0;
- s->match_length = MIN_MATCH-1;
- s->match_available = 0;
- s->ins_h = 0;
-#ifdef ASMV
- match_init(); /* initialize the asm code */
-#endif
-}
-
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local int longest_match(s, cur_match)
- deflate_state *s;
- IPos cur_match; /* current match */
-{
- unsigned chain_length = s->max_chain_length;/* max hash chain length */
- register Bytef *scan = s->window + s->strstart; /* current string */
- register Bytef *match; /* matched string */
- register int len; /* length of current match */
- int best_len = s->prev_length; /* best match length so far */
- IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
- s->strstart - (IPos)MAX_DIST(s) : NIL;
- /* Stop when cur_match becomes <= limit. To simplify the code,
- * we prevent matches with the string of window index 0.
- */
- Posf *prev = s->prev;
- uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
- /* Compare two bytes at a time. Note: this is not always beneficial.
- * Try with and without -DUNALIGNED_OK to check.
- */
- register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
- register ush scan_start = *(ushf*)scan;
- register ush scan_end = *(ushf*)(scan+best_len-1);
-#else
- register Bytef *strend = s->window + s->strstart + MAX_MATCH;
- register Byte scan_end1 = scan[best_len-1];
- register Byte scan_end = scan[best_len];
-#endif
-
- /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
- * It is easy to get rid of this optimization if necessary.
- */
- Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
- /* Do not waste too much time if we already have a good match: */
- if (s->prev_length >= s->good_match) {
- chain_length >>= 2;
- }
- Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
- do {
- Assert(cur_match < s->strstart, "no future");
- match = s->window + cur_match;
-
- /* Skip to next match if the match length cannot increase
- * or if the match length is less than 2:
- */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
- /* This code assumes sizeof(unsigned short) == 2. Do not use
- * UNALIGNED_OK if your compiler uses a different size.
- */
- if (*(ushf*)(match+best_len-1) != scan_end ||
- *(ushf*)match != scan_start) continue;
-
- /* It is not necessary to compare scan[2] and match[2] since they are
- * always equal when the other bytes match, given that the hash keys
- * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
- * strstart+3, +5, ... up to strstart+257. We check for insufficient
- * lookahead only every 4th comparison; the 128th check will be made
- * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
- * necessary to put more guard bytes at the end of the window, or
- * to check more often for insufficient lookahead.
- */
- Assert(scan[2] == match[2], "scan[2]?");
- scan++, match++;
- do {
- } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
- scan < strend);
- /* The funny "do {}" generates better code on most compilers */
-
- /* Here, scan <= window+strstart+257 */
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
- if (*scan == *match) scan++;
-
- len = (MAX_MATCH - 1) - (int)(strend-scan);
- scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
- if (match[best_len] != scan_end ||
- match[best_len-1] != scan_end1 ||
- *match != *scan ||
- *++match != scan[1]) continue;
-
- /* The check at best_len-1 can be removed because it will be made
- * again later. (This heuristic is not always a win.)
- * It is not necessary to compare scan[2] and match[2] since they
- * are always equal when the other bytes match, given that
- * the hash keys are equal and that HASH_BITS >= 8.
- */
- scan += 2, match++;
- Assert(*scan == *match, "match[2]?");
-
- /* We check for insufficient lookahead only every 8th comparison;
- * the 256th check will be made at strstart+258.
- */
- do {
- } while (*++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- *++scan == *++match && *++scan == *++match &&
- scan < strend);
-
- Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
- len = MAX_MATCH - (int)(strend - scan);
- scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
- if (len > best_len) {
- s->match_start = cur_match;
- best_len = len;
- if (len >= s->nice_match) break;
-#ifdef UNALIGNED_OK
- scan_end = *(ushf*)(scan+best_len-1);
-#else
- scan_end1 = scan[best_len-1];
- scan_end = scan[best_len];
-#endif
- }
- } while ((cur_match = prev[cur_match & wmask]) > limit
- && --chain_length != 0);
-
- return best_len;
-}
-#endif /* ASMV */
-
-#ifdef DEBUG_ZLIB
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
- deflate_state *s;
- IPos start, match;
- int length;
-{
- /* check that the match is indeed a match */
- if (memcmp((charf *)s->window + match,
- (charf *)s->window + start, length) != EQUAL) {
- fprintf(stderr,
- " start %u, match %u, length %d\n",
- start, match, length);
- do { fprintf(stderr, "%c%c", s->window[match++],
- s->window[start++]); } while (--length != 0);
- z_error("invalid match");
- }
- if (verbose > 1) {
- fprintf(stderr,"\\[%d,%d]", start-match, length);
- do { putc(s->window[start++], stderr); } while (--length != 0);
- }
-}
-#else
-# define check_match(s, start, match, length)
-#endif
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- * At least one byte has been read, or avail_in == 0; reads are
- * performed for at least two bytes (required for the zip translate_eol
- * option -- not supported here).
- */
-local void fill_window(s)
- deflate_state *s;
-{
- register unsigned n, m;
- register Posf *p;
- unsigned more; /* Amount of free space at the end of the window. */
- uInt wsize = s->w_size;
-
- do {
- more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
- /* Deal with !@#$% 64K limit: */
- if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
- more = wsize;
- } else if (more == (unsigned)(-1)) {
- /* Very unlikely, but possible on 16 bit machine if strstart == 0
- * and lookahead == 1 (input done one byte at time)
- */
- more--;
-
- /* If the window is almost full and there is insufficient lookahead,
- * move the upper half to the lower one to make room in the upper half.
- */
- } else if (s->strstart >= wsize+MAX_DIST(s)) {
-
- /* By the IN assertion, the window is not empty so we can't confuse
- * more == 0 with more == 64K on a 16 bit machine.
- */
- zmemcpy((charf *)s->window, (charf *)s->window+wsize,
- (unsigned)wsize);
- s->match_start -= wsize;
- s->strstart -= wsize; /* we now have strstart >= MAX_DIST */
-
- s->block_start -= (long) wsize;
-
- /* Slide the hash table (could be avoided with 32 bit values
- at the expense of memory usage):
- */
- n = s->hash_size;
- p = &s->head[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- } while (--n);
-
- n = wsize;
- p = &s->prev[n];
- do {
- m = *--p;
- *p = (Pos)(m >= wsize ? m-wsize : NIL);
- /* If n is not on any hash chain, prev[n] is garbage but
- * its value will never be used.
- */
- } while (--n);
-
- more += wsize;
- }
- if (s->strm->avail_in == 0) return;
-
- /* If there was no sliding:
- * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
- * more == window_size - lookahead - strstart
- * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
- * => more >= window_size - 2*WSIZE + 2
- * In the BIG_MEM or MMAP case (not yet supported),
- * window_size == input_size + MIN_LOOKAHEAD &&
- * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
- * Otherwise, window_size == 2*WSIZE so more >= 2.
- * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
- */
- Assert(more >= 2, "more < 2");
-
- n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
- more);
- s->lookahead += n;
-
- /* Initialize the hash value now that we have some input: */
- if (s->lookahead >= MIN_MATCH) {
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- }
- /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
- * but this is not important since only literal bytes will be emitted.
- */
-
- } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, flush) { \
- ct_flush_block(s, (s->block_start >= 0L ? \
- (charf *)&s->window[(unsigned)s->block_start] : \
- (charf *)Z_NULL), (long)s->strstart - s->block_start, (flush)); \
- s->block_start = s->strstart; \
- flush_pending(s->strm); \
- Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, flush) { \
- FLUSH_BLOCK_ONLY(s, flush); \
- if (s->strm->avail_out == 0) return 1; \
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return true if
- * processing was terminated prematurely (no more input or output space).
- * This function does not perform lazy evaluationof matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local int deflate_fast(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of the hash chain */
- int bflush; /* set if current block must be flushed */
-
- s->prev_length = MIN_MATCH-1;
-
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) return 1;
-
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- * At this point we have always match_length < MIN_MATCH
- */
- if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
- if (s->strategy != Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- }
- /* longest_match() sets match_start */
-
- if (s->match_length > s->lookahead) s->match_length = s->lookahead;
- }
- if (s->match_length >= MIN_MATCH) {
- check_match(s, s->strstart, s->match_start, s->match_length);
-
- bflush = ct_tally(s, s->strstart - s->match_start,
- s->match_length - MIN_MATCH);
-
- s->lookahead -= s->match_length;
-
- /* Insert new strings in the hash table only if the match length
- * is not too large. This saves time but degrades compression.
- */
- if (s->match_length <= s->max_insert_length &&
- s->lookahead >= MIN_MATCH) {
- s->match_length--; /* string at strstart already in hash table */
- do {
- s->strstart++;
- INSERT_STRING(s, s->strstart, hash_head);
- /* strstart never exceeds WSIZE-MAX_MATCH, so there are
- * always MIN_MATCH bytes ahead.
- */
- } while (--s->match_length != 0);
- s->strstart++;
- } else {
- s->strstart += s->match_length;
- s->match_length = 0;
- s->ins_h = s->window[s->strstart];
- UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
- Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
- /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
- * matter since it will be recomputed at next deflate call.
- */
- }
- } else {
- /* No match, output a literal byte */
- Tracevv((stderr,"%c", s->window[s->strstart]));
- bflush = ct_tally (s, 0, s->window[s->strstart]);
- s->lookahead--;
- s->strstart++;
- }
- if (bflush) FLUSH_BLOCK(s, Z_NO_FLUSH);
- }
- FLUSH_BLOCK(s, flush);
- return 0; /* normal exit */
-}
-
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local int deflate_slow(s, flush)
- deflate_state *s;
- int flush;
-{
- IPos hash_head = NIL; /* head of hash chain */
- int bflush; /* set if current block must be flushed */
-
- /* Process the input block. */
- for (;;) {
- /* Make sure that we always have enough lookahead, except
- * at the end of the input file. We need MAX_MATCH bytes
- * for the next match, plus MIN_MATCH bytes to insert the
- * string following the next match.
- */
- if (s->lookahead < MIN_LOOKAHEAD) {
- fill_window(s);
- if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) return 1;
-
- if (s->lookahead == 0) break; /* flush the current block */
- }
-
- /* Insert the string window[strstart .. strstart+2] in the
- * dictionary, and set hash_head to the head of the hash chain:
- */
- if (s->lookahead >= MIN_MATCH) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
-
- /* Find the longest match, discarding those <= prev_length.
- */
- s->prev_length = s->match_length, s->prev_match = s->match_start;
- s->match_length = MIN_MATCH-1;
-
- if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
- s->strstart - hash_head <= MAX_DIST(s)) {
- /* To simplify the code, we prevent matches with the string
- * of window index 0 (in particular we have to avoid a match
- * of the string with itself at the start of the input file).
- */
- if (s->strategy != Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- }
- /* longest_match() sets match_start */
- if (s->match_length > s->lookahead) s->match_length = s->lookahead;
-
- if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
- (s->match_length == MIN_MATCH &&
- s->strstart - s->match_start > TOO_FAR))) {
-
- /* If prev_match is also MIN_MATCH, match_start is garbage
- * but we will ignore the current match anyway.
- */
- s->match_length = MIN_MATCH-1;
- }
- }
- /* If there was a match at the previous step and the current
- * match is not better, output the previous match:
- */
- if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
- uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
- /* Do not insert strings in hash table beyond this. */
-
- check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
- bflush = ct_tally(s, s->strstart -1 - s->prev_match,
- s->prev_length - MIN_MATCH);
-
- /* Insert in hash table all strings up to the end of the match.
- * strstart-1 and strstart are already inserted. If there is not
- * enough lookahead, the last two strings are not inserted in
- * the hash table.
- */
- s->lookahead -= s->prev_length-1;
- s->prev_length -= 2;
- do {
- if (++s->strstart <= max_insert) {
- INSERT_STRING(s, s->strstart, hash_head);
- }
- } while (--s->prev_length != 0);
- s->match_available = 0;
- s->match_length = MIN_MATCH-1;
- s->strstart++;
-
- if (bflush) FLUSH_BLOCK(s, Z_NO_FLUSH);
-
- } else if (s->match_available) {
- /* If there was no match at the previous position, output a
- * single literal. If there was a match but the current match
- * is longer, truncate the previous match to a single literal.
- */
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- if (ct_tally (s, 0, s->window[s->strstart-1])) {
- FLUSH_BLOCK_ONLY(s, Z_NO_FLUSH);
- }
- s->strstart++;
- s->lookahead--;
- if (s->strm->avail_out == 0) return 1;
- } else {
- /* There is no previous match to compare with, wait for
- * the next step to decide.
- */
- s->match_available = 1;
- s->strstart++;
- s->lookahead--;
- }
- }
- Assert (flush != Z_NO_FLUSH, "no flush?");
- if (s->match_available) {
- Tracevv((stderr,"%c", s->window[s->strstart-1]));
- ct_tally (s, 0, s->window[s->strstart-1]);
- s->match_available = 0;
- }
- FLUSH_BLOCK(s, flush);
- return 0;
-}
-
-
-/*+++++*/
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * ALGORITHM
- *
- * The "deflation" process uses several Huffman trees. The more
- * common source values are represented by shorter bit sequences.
- *
- * Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values). The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- * REFERENCES
- *
- * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- * Storer, James A.
- * Data Compression: Methods and Theory, pp. 49-50.
- * Computer Science Press, 1988. ISBN 0-7167-8156-5.
- *
- * Sedgewick, R.
- * Algorithms, p290.
- * Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* From: trees.c,v 1.5 1995/05/03 17:27:12 jloup Exp */
-
-#ifdef DEBUG_ZLIB
-# include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6 16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10 17
-/* repeat a zero length 3-10 times (3 bits of repeat count) */
-
-#define REPZ_11_138 18
-/* repeat a zero length 11-138 times (7 bits of repeat count) */
-
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
- = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
- = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
- = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local uch bl_order[BL_CODES]
- = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- * To do: initialize at compile time to be completely reentrant. ???
- */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see ct_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-local uch dist_code[512];
-/* distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-struct static_tree_desc_s {
- ct_data *static_tree; /* static tree or NULL */
- intf *extra_bits; /* extra bits for each code or NULL */
- int extra_base; /* base index for extra_bits */
- int elems; /* max number of elements in the tree */
- int max_length; /* max bit length for the codes */
-};
-
-local static_tree_desc static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc static_d_desc =
-{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS};
-
-local static_tree_desc static_bl_desc =
-{(ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void ct_static_init OF((void));
-local void init_block OF((deflate_state *s));
-local void pqdownheap OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen OF((deflate_state *s, tree_desc *desc));
-local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree OF((deflate_state *s, tree_desc *desc));
-local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree OF((deflate_state *s, ct_data *tree, int max_code));
-local int build_bl_tree OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
- int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
- ct_data *dtree));
-local void set_data_type OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup OF((deflate_state *s));
-local void bi_flush OF((deflate_state *s));
-local void copy_block OF((deflate_state *s, charf *buf, unsigned len,
- int header));
-
-#ifndef DEBUG_ZLIB
-# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
- /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG_ZLIB */
-# define send_code(s, c, tree) \
- { if (verbose>1) fprintf(stderr,"\ncd %3d ",(c)); \
- send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-#define d_code(dist) \
- ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
- put_byte(s, (uch)((w) & 0xff)); \
- put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG_ZLIB
-local void send_bits OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
- deflate_state *s;
- int value; /* value to send */
- int length; /* number of bits */
-{
- Tracev((stderr," l %2d v %4x ", length, value));
- Assert(length > 0 && length <= 15, "invalid length");
- s->bits_sent += (ulg)length;
-
- /* If not enough room in bi_buf, use (valid) bits from bi_buf and
- * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
- * unused bits in value.
- */
- if (s->bi_valid > (int)Buf_size - length) {
- s->bi_buf |= (value << s->bi_valid);
- put_short(s, s->bi_buf);
- s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
- s->bi_valid += length - Buf_size;
- } else {
- s->bi_buf |= value << s->bi_valid;
- s->bi_valid += length;
- }
-}
-#else /* !DEBUG_ZLIB */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
- if (s->bi_valid > (int)Buf_size - len) {\
- int val = value;\
- s->bi_buf |= (val << s->bi_valid);\
- put_short(s, s->bi_buf);\
- s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
- s->bi_valid += len - Buf_size;\
- } else {\
- s->bi_buf |= (value) << s->bi_valid;\
- s->bi_valid += len;\
- }\
-}
-#endif /* DEBUG_ZLIB */
-
-
-#define MAX(a,b) (a >= b ? a : b)
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables.
- * To do: do this at compile time.
- */
-local void ct_static_init()
-{
- int n; /* iterates over tree elements */
- int bits; /* bit counter */
- int length; /* length value */
- int code; /* code value */
- int dist; /* distance index */
- ush bl_count[MAX_BITS+1];
- /* number of codes at each bit length for an optimal tree */
-
- /* Initialize the mapping length (0..255) -> length code (0..28) */
- length = 0;
- for (code = 0; code < LENGTH_CODES-1; code++) {
- base_length[code] = length;
- for (n = 0; n < (1<<extra_lbits[code]); n++) {
- length_code[length++] = (uch)code;
- }
- }
- Assert (length == 256, "ct_static_init: length != 256");
- /* Note that the length 255 (match length 258) can be represented
- * in two different ways: code 284 + 5 bits or code 285, so we
- * overwrite length_code[255] to use the best encoding:
- */
- length_code[length-1] = (uch)code;
-
- /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
- dist = 0;
- for (code = 0 ; code < 16; code++) {
- base_dist[code] = dist;
- for (n = 0; n < (1<<extra_dbits[code]); n++) {
- dist_code[dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "ct_static_init: dist != 256");
- dist >>= 7; /* from now on, all distances are divided by 128 */
- for ( ; code < D_CODES; code++) {
- base_dist[code] = dist << 7;
- for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
- dist_code[256 + dist++] = (uch)code;
- }
- }
- Assert (dist == 256, "ct_static_init: 256+dist != 512");
-
- /* Construct the codes of the static literal tree */
- for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
- n = 0;
- while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
- while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
- while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
- while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
- /* Codes 286 and 287 do not exist, but we must include them in the
- * tree construction to get a canonical Huffman tree (longest code
- * all ones)
- */
- gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
- /* The static distance tree is trivial: */
- for (n = 0; n < D_CODES; n++) {
- static_dtree[n].Len = 5;
- static_dtree[n].Code = bi_reverse(n, 5);
- }
-}
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-local void ct_init(s)
- deflate_state *s;
-{
- if (static_dtree[0].Len == 0) {
- ct_static_init(); /* To do: at compile time */
- }
-
- s->compressed_len = 0L;
-
- s->l_desc.dyn_tree = s->dyn_ltree;
- s->l_desc.stat_desc = &static_l_desc;
-
- s->d_desc.dyn_tree = s->dyn_dtree;
- s->d_desc.stat_desc = &static_d_desc;
-
- s->bl_desc.dyn_tree = s->bl_tree;
- s->bl_desc.stat_desc = &static_bl_desc;
-
- s->bi_buf = 0;
- s->bi_valid = 0;
- s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG_ZLIB
- s->bits_sent = 0L;
-#endif
- s->blocks_in_packet = 0;
-
- /* Initialize the first block of the first file: */
- init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
- deflate_state *s;
-{
- int n; /* iterates over tree elements */
-
- /* Initialize the trees. */
- for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0;
- for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0;
- for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
- s->dyn_ltree[END_BLOCK].Freq = 1;
- s->opt_len = s->static_len = 0L;
- s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
- top = s->heap[SMALLEST]; \
- s->heap[SMALLEST] = s->heap[s->heap_len--]; \
- pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
- (tree[n].Freq < tree[m].Freq || \
- (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
- deflate_state *s;
- ct_data *tree; /* the tree to restore */
- int k; /* node to move down */
-{
- int v = s->heap[k];
- int j = k << 1; /* left son of k */
- while (j <= s->heap_len) {
- /* Set j to the smallest of the two sons: */
- if (j < s->heap_len &&
- smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
- j++;
- }
- /* Exit if v is smaller than both sons */
- if (smaller(tree, v, s->heap[j], s->depth)) break;
-
- /* Exchange v with the smallest son */
- s->heap[k] = s->heap[j]; k = j;
-
- /* And continue down the tree, setting j to the left son of k */
- j <<= 1;
- }
- s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- * above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- * array bl_count contains the frequencies for each bit length.
- * The length opt_len is updated; static_len is also updated if stree is
- * not null.
- */
-local void gen_bitlen(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- int max_code = desc->max_code;
- ct_data *stree = desc->stat_desc->static_tree;
- intf *extra = desc->stat_desc->extra_bits;
- int base = desc->stat_desc->extra_base;
- int max_length = desc->stat_desc->max_length;
- int h; /* heap index */
- int n, m; /* iterate over the tree elements */
- int bits; /* bit length */
- int xbits; /* extra bits */
- ush f; /* frequency */
- int overflow = 0; /* number of elements with bit length too large */
-
- for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
- /* In a first pass, compute the optimal bit lengths (which may
- * overflow in the case of the bit length tree).
- */
- tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
- for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
- n = s->heap[h];
- bits = tree[tree[n].Dad].Len + 1;
- if (bits > max_length) bits = max_length, overflow++;
- tree[n].Len = (ush)bits;
- /* We overwrite tree[n].Dad which is no longer needed */
-
- if (n > max_code) continue; /* not a leaf node */
-
- s->bl_count[bits]++;
- xbits = 0;
- if (n >= base) xbits = extra[n-base];
- f = tree[n].Freq;
- s->opt_len += (ulg)f * (bits + xbits);
- if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
- }
- if (overflow == 0) return;
-
- Trace((stderr,"\nbit length overflow\n"));
- /* This happens for example on obj2 and pic of the Calgary corpus */
-
- /* Find the first bit length which could increase: */
- do {
- bits = max_length-1;
- while (s->bl_count[bits] == 0) bits--;
- s->bl_count[bits]--; /* move one leaf down the tree */
- s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
- s->bl_count[max_length]--;
- /* The brother of the overflow item also moves one step up,
- * but this does not affect bl_count[max_length]
- */
- overflow -= 2;
- } while (overflow > 0);
-
- /* Now recompute all bit lengths, scanning in increasing frequency.
- * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
- * lengths instead of fixing only the wrong ones. This idea is taken
- * from 'ar' written by Haruhiko Okumura.)
- */
- for (bits = max_length; bits != 0; bits--) {
- n = s->bl_count[bits];
- while (n != 0) {
- m = s->heap[--h];
- if (m > max_code) continue;
- if (tree[m].Len != (unsigned) bits) {
- Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
- s->opt_len += ((long)bits - (long)tree[m].Len)
- *(long)tree[m].Freq;
- tree[m].Len = (ush)bits;
- }
- n--;
- }
- }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- * zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
- ct_data *tree; /* the tree to decorate */
- int max_code; /* largest code with non zero frequency */
- ushf *bl_count; /* number of codes at each bit length */
-{
- ush next_code[MAX_BITS+1]; /* next code value for each bit length */
- ush code = 0; /* running code value */
- int bits; /* bit index */
- int n; /* code index */
-
- /* The distribution counts are first used to generate the code values
- * without bit reversal.
- */
- for (bits = 1; bits <= MAX_BITS; bits++) {
- next_code[bits] = code = (code + bl_count[bits-1]) << 1;
- }
- /* Check that the bit counts in bl_count are consistent. The last code
- * must be all ones.
- */
- Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
- "inconsistent bit counts");
- Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
- for (n = 0; n <= max_code; n++) {
- int len = tree[n].Len;
- if (len == 0) continue;
- /* Now reverse the bits */
- tree[n].Code = bi_reverse(next_code[len]++, len);
-
- Tracec(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
- n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
- }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- * and corresponding code. The length opt_len is updated; static_len is
- * also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
- deflate_state *s;
- tree_desc *desc; /* the tree descriptor */
-{
- ct_data *tree = desc->dyn_tree;
- ct_data *stree = desc->stat_desc->static_tree;
- int elems = desc->stat_desc->elems;
- int n, m; /* iterate over heap elements */
- int max_code = -1; /* largest code with non zero frequency */
- int node; /* new node being created */
-
- /* Construct the initial heap, with least frequent element in
- * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
- * heap[0] is not used.
- */
- s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
- for (n = 0; n < elems; n++) {
- if (tree[n].Freq != 0) {
- s->heap[++(s->heap_len)] = max_code = n;
- s->depth[n] = 0;
- } else {
- tree[n].Len = 0;
- }
- }
-
- /* The pkzip format requires that at least one distance code exists,
- * and that at least one bit should be sent even if there is only one
- * possible code. So to avoid special checks later on we force at least
- * two codes of non zero frequency.
- */
- while (s->heap_len < 2) {
- node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
- tree[node].Freq = 1;
- s->depth[node] = 0;
- s->opt_len--; if (stree) s->static_len -= stree[node].Len;
- /* node is 0 or 1 so it does not have extra bits */
- }
- desc->max_code = max_code;
-
- /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
- * establish sub-heaps of increasing lengths:
- */
- for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
- /* Construct the Huffman tree by repeatedly combining the least two
- * frequent nodes.
- */
- node = elems; /* next internal node of the tree */
- do {
- pqremove(s, tree, n); /* n = node of least frequency */
- m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
- s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
- s->heap[--(s->heap_max)] = m;
-
- /* Create a new node father of n and m */
- tree[node].Freq = tree[n].Freq + tree[m].Freq;
- s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
- tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
- if (tree == s->bl_tree) {
- fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
- node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
- }
-#endif
- /* and insert the new node in the heap */
- s->heap[SMALLEST] = node++;
- pqdownheap(s, tree, SMALLEST);
-
- } while (s->heap_len >= 2);
-
- s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
- /* At this point, the fields freq and dad are set. We can now
- * generate the bit lengths.
- */
- gen_bitlen(s, (tree_desc *)desc);
-
- /* The field len is now set, we can generate the bit codes */
- gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- if (nextlen == 0) max_count = 138, min_count = 3;
- tree[max_code+1].Len = (ush)0xffff; /* guard */
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- s->bl_tree[curlen].Freq += count;
- } else if (curlen != 0) {
- if (curlen != prevlen) s->bl_tree[curlen].Freq++;
- s->bl_tree[REP_3_6].Freq++;
- } else if (count <= 10) {
- s->bl_tree[REPZ_3_10].Freq++;
- } else {
- s->bl_tree[REPZ_11_138].Freq++;
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
- deflate_state *s;
- ct_data *tree; /* the tree to be scanned */
- int max_code; /* and its largest code of non zero frequency */
-{
- int n; /* iterates over all tree elements */
- int prevlen = -1; /* last emitted length */
- int curlen; /* length of current code */
- int nextlen = tree[0].Len; /* length of next code */
- int count = 0; /* repeat count of the current code */
- int max_count = 7; /* max repeat count */
- int min_count = 4; /* min repeat count */
-
- /* tree[max_code+1].Len = -1; */ /* guard already set */
- if (nextlen == 0) max_count = 138, min_count = 3;
-
- for (n = 0; n <= max_code; n++) {
- curlen = nextlen; nextlen = tree[n+1].Len;
- if (++count < max_count && curlen == nextlen) {
- continue;
- } else if (count < min_count) {
- do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
- } else if (curlen != 0) {
- if (curlen != prevlen) {
- send_code(s, curlen, s->bl_tree); count--;
- }
- Assert(count >= 3 && count <= 6, " 3_6?");
- send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
- } else if (count <= 10) {
- send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
- } else {
- send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
- }
- count = 0; prevlen = curlen;
- if (nextlen == 0) {
- max_count = 138, min_count = 3;
- } else if (curlen == nextlen) {
- max_count = 6, min_count = 3;
- } else {
- max_count = 7, min_count = 4;
- }
- }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
- deflate_state *s;
-{
- int max_blindex; /* index of last bit length code of non zero freq */
-
- /* Determine the bit length frequencies for literal and distance trees */
- scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
- scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
- /* Build the bit length tree: */
- build_tree(s, (tree_desc *)(&(s->bl_desc)));
- /* opt_len now includes the length of the tree representations, except
- * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
- */
-
- /* Determine the number of bit length codes to send. The pkzip format
- * requires that at least 4 bit length codes be sent. (appnote.txt says
- * 3 but the actual value used is 4.)
- */
- for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
- if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
- }
- /* Update opt_len to include the bit length tree and counts */
- s->opt_len += 3*(max_blindex+1) + 5+5+4;
- Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
- s->opt_len, s->static_len));
-
- return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
- deflate_state *s;
- int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
- int rank; /* index in bl_order */
-
- Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
- Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
- "too many codes");
- Tracev((stderr, "\nbl counts: "));
- send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
- send_bits(s, dcodes-1, 5);
- send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */
- for (rank = 0; rank < blcodes; rank++) {
- Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
- send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
- }
- Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
- Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
- send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
- Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-local void ct_stored_block(s, buf, stored_len, eof)
- deflate_state *s;
- charf *buf; /* input block */
- ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
-{
- send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */
- s->compressed_len = (s->compressed_len + 3 + 7) & ~7L;
- s->compressed_len += (stored_len + 4) << 3;
-
- copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* Send just the `stored block' type code without any length bytes or data.
- */
-local void ct_stored_type_only(s)
- deflate_state *s;
-{
- send_bits(s, (STORED_BLOCK << 1), 3);
- bi_windup(s);
- s->compressed_len = (s->compressed_len + 3) & ~7L;
-}
-
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the EOB
- * code for the previous block was coded on 5 bits or less, inflate
- * may have only 5+3 bits of lookahead to decode this EOB.
- * (There are no problems if the previous block is stored or fixed.)
- */
-local void ct_align(s)
- deflate_state *s;
-{
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
- s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
- bi_flush(s);
- /* Of the 10 bits for the empty block, we have already sent
- * (10 - bi_valid) bits. The lookahead for the EOB of the previous
- * block was thus its length plus what we have just sent.
- */
- if (s->last_eob_len + 10 - s->bi_valid < 9) {
- send_bits(s, STATIC_TREES<<1, 3);
- send_code(s, END_BLOCK, static_ltree);
- s->compressed_len += 10L;
- bi_flush(s);
- }
- s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
- * returns the total compressed length for the file so far.
- */
-local ulg ct_flush_block(s, buf, stored_len, flush)
- deflate_state *s;
- charf *buf; /* input block, or NULL if too old */
- ulg stored_len; /* length of input block */
- int flush; /* Z_FINISH if this is the last block for a file */
-{
- ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
- int max_blindex; /* index of last bit length code of non zero freq */
- int eof = flush == Z_FINISH;
-
- ++s->blocks_in_packet;
-
- /* Check if the file is ascii or binary */
- if (s->data_type == UNKNOWN) set_data_type(s);
-
- /* Construct the literal and distance trees */
- build_tree(s, (tree_desc *)(&(s->l_desc)));
- Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
-
- build_tree(s, (tree_desc *)(&(s->d_desc)));
- Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
- s->static_len));
- /* At this point, opt_len and static_len are the total bit lengths of
- * the compressed block data, excluding the tree representations.
- */
-
- /* Build the bit length tree for the above two trees, and get the index
- * in bl_order of the last bit length code to send.
- */
- max_blindex = build_bl_tree(s);
-
- /* Determine the best encoding. Compute first the block length in bytes */
- opt_lenb = (s->opt_len+3+7)>>3;
- static_lenb = (s->static_len+3+7)>>3;
-
- Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
- opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
- s->last_lit));
-
- if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
- /* If compression failed and this is the first and last block,
- * and if the .zip file can be seeked (to rewrite the local header),
- * the whole file is transformed into a stored file:
- */
-#ifdef STORED_FILE_OK
-# ifdef FORCE_STORED_FILE
- if (eof && compressed_len == 0L) /* force stored file */
-# else
- if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable())
-# endif
- {
- /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
- if (buf == (charf*)0) error ("block vanished");
-
- copy_block(buf, (unsigned)stored_len, 0); /* without header */
- s->compressed_len = stored_len << 3;
- s->method = STORED;
- } else
-#endif /* STORED_FILE_OK */
-
- /* For Z_PACKET_FLUSH, if we don't achieve the required minimum
- * compression, and this block contains all the data since the last
- * time we used Z_PACKET_FLUSH, then just omit this block completely
- * from the output.
- */
- if (flush == Z_PACKET_FLUSH && s->blocks_in_packet == 1
- && opt_lenb > stored_len - s->minCompr) {
- s->blocks_in_packet = 0;
- /* output nothing */
- } else
-
-#ifdef FORCE_STORED
- if (buf != (char*)0) /* force stored block */
-#else
- if (stored_len+4 <= opt_lenb && buf != (char*)0)
- /* 4: two words for the lengths */
-#endif
- {
- /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
- * Otherwise we can't have processed more than WSIZE input bytes since
- * the last block flush, because compression would have been
- * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
- * transform a block into a stored block.
- */
- ct_stored_block(s, buf, stored_len, eof);
- } else
-
-#ifdef FORCE_STATIC
- if (static_lenb >= 0) /* force static trees */
-#else
- if (static_lenb == opt_lenb)
-#endif
- {
- send_bits(s, (STATIC_TREES<<1)+eof, 3);
- compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
- s->compressed_len += 3 + s->static_len;
- } else {
- send_bits(s, (DYN_TREES<<1)+eof, 3);
- send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
- max_blindex+1);
- compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
- s->compressed_len += 3 + s->opt_len;
- }
- Assert (s->compressed_len == s->bits_sent, "bad compressed size");
- init_block(s);
-
- if (eof) {
- bi_windup(s);
- s->compressed_len += 7; /* align on byte boundary */
- }
- Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
- s->compressed_len-7*eof));
-
- return s->compressed_len >> 3;
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-local int ct_tally (s, dist, lc)
- deflate_state *s;
- int dist; /* distance of matched string */
- int lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
- s->d_buf[s->last_lit] = (ush)dist;
- s->l_buf[s->last_lit++] = (uch)lc;
- if (dist == 0) {
- /* lc is the unmatched char */
- s->dyn_ltree[lc].Freq++;
- } else {
- s->matches++;
- /* Here, lc is the match length - MIN_MATCH */
- dist--; /* dist = match distance - 1 */
- Assert((ush)dist < (ush)MAX_DIST(s) &&
- (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
- (ush)d_code(dist) < (ush)D_CODES, "ct_tally: bad match");
-
- s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
- s->dyn_dtree[d_code(dist)].Freq++;
- }
-
- /* Try to guess if it is profitable to stop the current block here */
- if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
- /* Compute an upper bound for the compressed length */
- ulg out_length = (ulg)s->last_lit*8L;
- ulg in_length = (ulg)s->strstart - s->block_start;
- int dcode;
- for (dcode = 0; dcode < D_CODES; dcode++) {
- out_length += (ulg)s->dyn_dtree[dcode].Freq *
- (5L+extra_dbits[dcode]);
- }
- out_length >>= 3;
- Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
- s->last_lit, in_length, out_length,
- 100L - out_length*100L/in_length));
- if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
- }
- return (s->last_lit == s->lit_bufsize-1);
- /* We avoid equality with lit_bufsize because of wraparound at 64K
- * on 16 bit machines and because stored blocks are restricted to
- * 64K-1 bytes.
- */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
- deflate_state *s;
- ct_data *ltree; /* literal tree */
- ct_data *dtree; /* distance tree */
-{
- unsigned dist; /* distance of matched string */
- int lc; /* match length or unmatched char (if dist == 0) */
- unsigned lx = 0; /* running index in l_buf */
- unsigned code; /* the code to send */
- int extra; /* number of extra bits to send */
-
- if (s->last_lit != 0) do {
- dist = s->d_buf[lx];
- lc = s->l_buf[lx++];
- if (dist == 0) {
- send_code(s, lc, ltree); /* send a literal byte */
- Tracecv(isgraph(lc), (stderr," '%c' ", lc));
- } else {
- /* Here, lc is the match length - MIN_MATCH */
- code = length_code[lc];
- send_code(s, code+LITERALS+1, ltree); /* send the length code */
- extra = extra_lbits[code];
- if (extra != 0) {
- lc -= base_length[code];
- send_bits(s, lc, extra); /* send the extra length bits */
- }
- dist--; /* dist is now the match distance - 1 */
- code = d_code(dist);
- Assert (code < D_CODES, "bad d_code");
-
- send_code(s, code, dtree); /* send the distance code */
- extra = extra_dbits[code];
- if (extra != 0) {
- dist -= base_dist[code];
- send_bits(s, dist, extra); /* send the extra distance bits */
- }
- } /* literal or match pair ? */
-
- /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
- Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
-
- } while (lx < s->last_lit);
-
- send_code(s, END_BLOCK, ltree);
- s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
- */
-local void set_data_type(s)
- deflate_state *s;
-{
- int n = 0;
- unsigned ascii_freq = 0;
- unsigned bin_freq = 0;
- while (n < 7) bin_freq += s->dyn_ltree[n++].Freq;
- while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq;
- while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
- s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? BINARY : ASCII);
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
- unsigned code; /* the value to invert */
- int len; /* its bit length */
-{
- register unsigned res = 0;
- do {
- res |= code & 1;
- code >>= 1, res <<= 1;
- } while (--len > 0);
- return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
- deflate_state *s;
-{
- if (s->bi_valid == 16) {
- put_short(s, s->bi_buf);
- s->bi_buf = 0;
- s->bi_valid = 0;
- } else if (s->bi_valid >= 8) {
- put_byte(s, (Byte)s->bi_buf);
- s->bi_buf >>= 8;
- s->bi_valid -= 8;
- }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
- deflate_state *s;
-{
- if (s->bi_valid > 8) {
- put_short(s, s->bi_buf);
- } else if (s->bi_valid > 0) {
- put_byte(s, (Byte)s->bi_buf);
- }
- s->bi_buf = 0;
- s->bi_valid = 0;
-#ifdef DEBUG_ZLIB
- s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
- deflate_state *s;
- charf *buf; /* the input data */
- unsigned len; /* its length */
- int header; /* true if block header must be written */
-{
- bi_windup(s); /* align on byte boundary */
- s->last_eob_len = 8; /* enough lookahead for inflate */
-
- if (header) {
- put_short(s, (ush)len);
- put_short(s, (ush)~len);
-#ifdef DEBUG_ZLIB
- s->bits_sent += 2*16;
-#endif
- }
-#ifdef DEBUG_ZLIB
- s->bits_sent += (ulg)len<<3;
-#endif
- while (len--) {
- put_byte(s, *buf++);
- }
-}
-
-
-/*+++++*/
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-local inflate_blocks_statef * inflate_blocks_new OF((
- z_stream *z,
- check_func c, /* check function */
- uInt w)); /* window size */
-
-local int inflate_blocks OF((
- inflate_blocks_statef *,
- z_stream *,
- int)); /* initial return code */
-
-local void inflate_blocks_reset OF((
- inflate_blocks_statef *,
- z_stream *,
- uLongf *)); /* check value on output */
-
-local int inflate_blocks_free OF((
- inflate_blocks_statef *,
- z_stream *,
- uLongf *)); /* check value on output */
-
-local int inflate_addhistory OF((
- inflate_blocks_statef *,
- z_stream *));
-
-local int inflate_packet_flush OF((
- inflate_blocks_statef *));
-
-/*+++++*/
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
- that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
- union {
- struct {
- Byte Exop; /* number of extra bits or operation */
- Byte Bits; /* number of bits in this code or subcode */
- } what;
- uInt Nalloc; /* number of these allocated here */
- Bytef *pad; /* pad structure to a power of 2 (4 bytes for */
- } word; /* 16-bit, 8 bytes for 32-bit machines) */
- union {
- uInt Base; /* literal, length base, or distance base */
- inflate_huft *Next; /* pointer to next level of table */
- } more;
-};
-
-#ifdef DEBUG_ZLIB
- local uInt inflate_hufts;
-#endif
-
-local int inflate_trees_bits OF((
- uIntf *, /* 19 code lengths */
- uIntf *, /* bits tree desired/actual depth */
- inflate_huft * FAR *, /* bits tree result */
- z_stream *)); /* for zalloc, zfree functions */
-
-local int inflate_trees_dynamic OF((
- uInt, /* number of literal/length codes */
- uInt, /* number of distance codes */
- uIntf *, /* that many (total) code lengths */
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *, /* distance tree result */
- z_stream *)); /* for zalloc, zfree functions */
-
-local int inflate_trees_fixed OF((
- uIntf *, /* literal desired/actual bit depth */
- uIntf *, /* distance desired/actual bit depth */
- inflate_huft * FAR *, /* literal/length tree result */
- inflate_huft * FAR *)); /* distance tree result */
-
-local int inflate_trees_free OF((
- inflate_huft *, /* tables to free */
- z_stream *)); /* for zfree function */
-
-
-/*+++++*/
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-local inflate_codes_statef *inflate_codes_new OF((
- uInt, uInt,
- inflate_huft *, inflate_huft *,
- z_stream *));
-
-local int inflate_codes OF((
- inflate_blocks_statef *,
- z_stream *,
- int));
-
-local void inflate_codes_free OF((
- inflate_codes_statef *,
- z_stream *));
-
-
-/*+++++*/
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* inflate private state */
-struct internal_state {
-
- /* mode */
- enum {
- METHOD, /* waiting for method byte */
- FLAG, /* waiting for flag byte */
- BLOCKS, /* decompressing blocks */
- CHECK4, /* four check bytes to go */
- CHECK3, /* three check bytes to go */
- CHECK2, /* two check bytes to go */
- CHECK1, /* one check byte to go */
- DONE, /* finished check, done */
- BAD} /* got an error--stay here */
- mode; /* current inflate mode */
-
- /* mode dependent information */
- union {
- uInt method; /* if FLAGS, method byte */
- struct {
- uLong was; /* computed check value */
- uLong need; /* stream check value */
- } check; /* if CHECK, check values to compare */
- uInt marker; /* if BAD, inflateSync's marker bytes count */
- } sub; /* submode */
-
- /* mode independent information */
- int nowrap; /* flag for no wrapper */
- uInt wbits; /* log2(window size) (8..15, defaults to 15) */
- inflate_blocks_statef
- *blocks; /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(z)
-z_stream *z;
-{
- uLong c;
-
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- z->total_in = z->total_out = 0;
- z->msg = Z_NULL;
- z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
- inflate_blocks_reset(z->state->blocks, z, &c);
- Trace((stderr, "inflate: reset\n"));
- return Z_OK;
-}
-
-
-int inflateEnd(z)
-z_stream *z;
-{
- uLong c;
-
- if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->blocks != Z_NULL)
- inflate_blocks_free(z->state->blocks, z, &c);
- ZFREE(z, z->state, sizeof(struct internal_state));
- z->state = Z_NULL;
- Trace((stderr, "inflate: end\n"));
- return Z_OK;
-}
-
-
-int inflateInit2(z, w)
-z_stream *z;
-int w;
-{
- /* initialize state */
- if (z == Z_NULL)
- return Z_STREAM_ERROR;
-/* if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */
-/* if (z->zfree == Z_NULL) z->zfree = zcfree; */
- if ((z->state = (struct internal_state FAR *)
- ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
- return Z_MEM_ERROR;
- z->state->blocks = Z_NULL;
-
- /* handle undocumented nowrap option (no zlib header or check) */
- z->state->nowrap = 0;
- if (w < 0)
- {
- w = - w;
- z->state->nowrap = 1;
- }
-
- /* set window size */
- if (w < 8 || w > 15)
- {
- inflateEnd(z);
- return Z_STREAM_ERROR;
- }
- z->state->wbits = (uInt)w;
-
- /* create inflate_blocks state */
- if ((z->state->blocks =
- inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
- == Z_NULL)
- {
- inflateEnd(z);
- return Z_MEM_ERROR;
- }
- Trace((stderr, "inflate: allocated\n"));
-
- /* reset state */
- inflateReset(z);
- return Z_OK;
-}
-
-
-int inflateInit(z)
-z_stream *z;
-{
- return inflateInit2(z, DEF_WBITS);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(z, f)
-z_stream *z;
-int f;
-{
- int r;
- uInt b;
-
- if (z == Z_NULL || z->next_in == Z_NULL)
- return Z_STREAM_ERROR;
- r = Z_BUF_ERROR;
- while (1) switch (z->state->mode)
- {
- case METHOD:
- NEEDBYTE
- if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED)
- {
- z->state->mode = BAD;
- z->msg = "unknown compression method";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
- {
- z->state->mode = BAD;
- z->msg = "invalid window size";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- z->state->mode = FLAG;
- case FLAG:
- NEEDBYTE
- if ((b = NEXTBYTE) & 0x20)
- {
- z->state->mode = BAD;
- z->msg = "invalid reserved bit";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- if (((z->state->sub.method << 8) + b) % 31)
- {
- z->state->mode = BAD;
- z->msg = "incorrect header check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Trace((stderr, "inflate: zlib header ok\n"));
- z->state->mode = BLOCKS;
- case BLOCKS:
- r = inflate_blocks(z->state->blocks, z, r);
- if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
- r = inflate_packet_flush(z->state->blocks);
- if (r == Z_DATA_ERROR)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0; /* can try inflateSync */
- break;
- }
- if (r != Z_STREAM_END)
- return r;
- r = Z_OK;
- inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
- if (z->state->nowrap)
- {
- z->state->mode = DONE;
- break;
- }
- z->state->mode = CHECK4;
- case CHECK4:
- NEEDBYTE
- z->state->sub.check.need = (uLong)NEXTBYTE << 24;
- z->state->mode = CHECK3;
- case CHECK3:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 16;
- z->state->mode = CHECK2;
- case CHECK2:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE << 8;
- z->state->mode = CHECK1;
- case CHECK1:
- NEEDBYTE
- z->state->sub.check.need += (uLong)NEXTBYTE;
-
- if (z->state->sub.check.was != z->state->sub.check.need)
- {
- z->state->mode = BAD;
- z->msg = "incorrect data check";
- z->state->sub.marker = 5; /* can't try inflateSync */
- break;
- }
- Trace((stderr, "inflate: zlib check ok\n"));
- z->state->mode = DONE;
- case DONE:
- return Z_STREAM_END;
- case BAD:
- return Z_DATA_ERROR;
- default:
- return Z_STREAM_ERROR;
- }
-
- empty:
- if (f != Z_PACKET_FLUSH)
- return r;
- z->state->mode = BAD;
- z->state->sub.marker = 0; /* can try inflateSync */
- return Z_DATA_ERROR;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(z)
-z_stream *z;
-{
- if (z->state->mode != BLOCKS)
- return Z_DATA_ERROR;
- return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(z)
-z_stream *z;
-{
- uInt n; /* number of bytes to look at */
- Bytef *p; /* pointer to bytes */
- uInt m; /* number of marker bytes found in a row */
- uLong r, w; /* temporaries to save total_in and total_out */
-
- /* set up */
- if (z == Z_NULL || z->state == Z_NULL)
- return Z_STREAM_ERROR;
- if (z->state->mode != BAD)
- {
- z->state->mode = BAD;
- z->state->sub.marker = 0;
- }
- if ((n = z->avail_in) == 0)
- return Z_BUF_ERROR;
- p = z->next_in;
- m = z->state->sub.marker;
-
- /* search */
- while (n && m < 4)
- {
- if (*p == (Byte)(m < 2 ? 0 : 0xff))
- m++;
- else if (*p)
- m = 0;
- else
- m = 4 - m;
- p++, n--;
- }
-
- /* restore */
- z->total_in += p - z->next_in;
- z->next_in = p;
- z->avail_in = n;
- z->state->sub.marker = m;
-
- /* return no joy or set up to restart on a new block */
- if (m != 4)
- return Z_DATA_ERROR;
- r = z->total_in; w = z->total_out;
- inflateReset(z);
- z->total_in = r; z->total_out = w;
- z->state->mode = BLOCKS;
- return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-
-/*+++++*/
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
- /* mode */
- enum {
- TYPE, /* get type bits (3, including end bit) */
- LENS, /* get lengths for stored */
- STORED, /* processing stored block */
- TABLE, /* get table lengths */
- BTREE, /* get bit lengths tree for a dynamic block */
- DTREE, /* get length, distance trees for a dynamic block */
- CODES, /* processing fixed or dynamic block */
- DRY, /* output remaining window bytes */
- DONEB, /* finished last block, done */
- BADB} /* got a data error--stuck here */
- mode; /* current inflate_block mode */
-
- /* mode dependent information */
- union {
- uInt left; /* if STORED, bytes left to copy */
- struct {
- uInt table; /* table lengths (14 bits) */
- uInt index; /* index into blens (or border) */
- uIntf *blens; /* bit lengths of codes */
- uInt bb; /* bit length tree depth */
- inflate_huft *tb; /* bit length decoding tree */
- int nblens; /* # elements allocated at blens */
- } trees; /* if DTREE, decoding info for trees */
- struct {
- inflate_huft *tl, *td; /* trees to free */
- inflate_codes_statef
- *codes;
- } decode; /* if CODES, current state */
- } sub; /* submode */
- uInt last; /* true if this block is the last block */
-
- /* mode independent information */
- uInt bitk; /* bits in bit buffer */
- uLong bitb; /* bit buffer */
- Bytef *window; /* sliding window */
- Bytef *end; /* one byte after sliding window */
- Bytef *read; /* window read pointer */
- Bytef *write; /* window write pointer */
- check_func checkfn; /* check function */
- uLong check; /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/* update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/* get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/* output bytes */
-#define WAVAIL (q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/* load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* And'ing with mask[n] masks the lower n bits */
-local uInt inflate_mask[] = {
- 0x0000,
- 0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
- 0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush OF((
- inflate_blocks_statef *,
- z_stream *,
- int));
-
-/*+++++*/
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-local int inflate_fast OF((
- uInt,
- uInt,
- inflate_huft *,
- inflate_huft *,
- inflate_blocks_statef *,
- z_stream *));
-
-
-/*+++++*/
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local uInt border[] = { /* Order of the bit length code lengths */
- 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
- Notes beyond the 1.93a appnote.txt:
-
- 1. Distance pointers never point before the beginning of the output
- stream.
- 2. Distance pointers can point back across blocks, up to 32k away.
- 3. There is an implied maximum of 7 bits for the bit length table and
- 15 bits for the actual data.
- 4. If only one code exists, then it is encoded using one bit. (Zero
- would be more efficient, but perhaps a little confusing.) If two
- codes exist, they are coded using one bit each (0 and 1).
- 5. There is no way of sending zero distance codes--a dummy must be
- sent if there are none. (History: a pre 2.0 version of PKZIP would
- store blocks with no distance codes, but this was discovered to be
- too harsh a criterion.) Valid only for 1.93a. 2.04c does allow
- zero distance codes, which is sent as one code of zero bits in
- length.
- 6. There are up to 286 literal/length codes. Code 256 represents the
- end-of-block. Note however that the static length tree defines
- 288 codes just to fill out the Huffman codes. Codes 286 and 287
- cannot be used though, since there is no length base or extra bits
- defined for them. Similarily, there are up to 30 distance codes.
- However, static trees define 32 codes (all 5 bits) to fill out the
- Huffman codes, but the last two had better not show up in the data.
- 7. Unzip can check dynamic Huffman blocks for complete code sets.
- The exception is that a single code would not be complete (see #4).
- 8. The five bits following the block type is really the number of
- literal codes sent minus 257.
- 9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
- (1+6+6). Therefore, to output three times the length, you output
- three codes (1+1+1), whereas to output four times the same length,
- you only need two codes (1+3). Hmm.
- 10. In the tree reconstruction algorithm, Code = Code + Increment
- only if BitLength(i) is not zero. (Pretty obvious.)
- 11. Correction: 4 Bits: # of Bit Length codes - 4 (4 - 19)
- 12. Note: length code 284 can represent 227-258, but length code 285
- really is 258. The last length deserves its own, short code
- since it gets used a lot in very redundant files. The length
- 258 is special since 258 - 3 (the min match length) is 255.
- 13. The literal/length and distance code bit lengths are read as a
- single stream of lengths. It is possible (and advantageous) for
- a repeat code (16, 17, or 18) to go across the boundary between
- the two sets of lengths.
- */
-
-
-local void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_stream *z;
-uLongf *c;
-{
- if (s->checkfn != Z_NULL)
- *c = s->check;
- if (s->mode == BTREE || s->mode == DTREE)
- ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
- if (s->mode == CODES)
- {
- inflate_codes_free(s->sub.decode.codes, z);
- inflate_trees_free(s->sub.decode.td, z);
- inflate_trees_free(s->sub.decode.tl, z);
- }
- s->mode = TYPE;
- s->bitk = 0;
- s->bitb = 0;
- s->read = s->write = s->window;
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(0L, Z_NULL, 0);
- Trace((stderr, "inflate: blocks reset\n"));
-}
-
-
-local inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_stream *z;
-check_func c;
-uInt w;
-{
- inflate_blocks_statef *s;
-
- if ((s = (inflate_blocks_statef *)ZALLOC
- (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
- return s;
- if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
- {
- ZFREE(z, s, sizeof(struct inflate_blocks_state));
- return Z_NULL;
- }
- s->end = s->window + w;
- s->checkfn = c;
- s->mode = TYPE;
- Trace((stderr, "inflate: blocks allocated\n"));
- inflate_blocks_reset(s, z, &s->check);
- return s;
-}
-
-
-local int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
- uInt t; /* temporary storage */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input based on current state */
- while (1) switch (s->mode)
- {
- case TYPE:
- NEEDBITS(3)
- t = (uInt)b & 7;
- s->last = t & 1;
- switch (t >> 1)
- {
- case 0: /* stored */
- Trace((stderr, "inflate: stored block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- t = k & 7; /* go to byte boundary */
- DUMPBITS(t)
- s->mode = LENS; /* get length of stored block */
- break;
- case 1: /* fixed */
- Trace((stderr, "inflate: fixed codes block%s\n",
- s->last ? " (last)" : ""));
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
-
- inflate_trees_fixed(&bl, &bd, &tl, &td);
- s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
- if (s->sub.decode.codes == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.decode.tl = Z_NULL; /* don't try to free these */
- s->sub.decode.td = Z_NULL;
- }
- DUMPBITS(3)
- s->mode = CODES;
- break;
- case 2: /* dynamic */
- Trace((stderr, "inflate: dynamic codes block%s\n",
- s->last ? " (last)" : ""));
- DUMPBITS(3)
- s->mode = TABLE;
- break;
- case 3: /* illegal */
- DUMPBITS(3)
- s->mode = BADB;
- z->msg = "invalid block type";
- r = Z_DATA_ERROR;
- LEAVE
- }
- break;
- case LENS:
- NEEDBITS(32)
- if (((~b) >> 16) != (b & 0xffff))
- {
- s->mode = BADB;
- z->msg = "invalid stored block lengths";
- r = Z_DATA_ERROR;
- LEAVE
- }
- s->sub.left = (uInt)b & 0xffff;
- b = k = 0; /* dump bits */
- Tracev((stderr, "inflate: stored length %u\n", s->sub.left));
- s->mode = s->sub.left ? STORED : TYPE;
- break;
- case STORED:
- if (n == 0)
- LEAVE
- NEEDOUT
- t = s->sub.left;
- if (t > n) t = n;
- if (t > m) t = m;
- zmemcpy(q, p, t);
- p += t; n -= t;
- q += t; m -= t;
- if ((s->sub.left -= t) != 0)
- break;
- Tracev((stderr, "inflate: stored end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- s->mode = s->last ? DRY : TYPE;
- break;
- case TABLE:
- NEEDBITS(14)
- s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
- if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
- {
- s->mode = BADB;
- z->msg = "too many length or distance symbols";
- r = Z_DATA_ERROR;
- LEAVE
- }
-#endif
- t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
- if (t < 19)
- t = 19;
- if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
- {
- r = Z_MEM_ERROR;
- LEAVE
- }
- s->sub.trees.nblens = t;
- DUMPBITS(14)
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: table sizes ok\n"));
- s->mode = BTREE;
- case BTREE:
- while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
- {
- NEEDBITS(3)
- s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
- DUMPBITS(3)
- }
- while (s->sub.trees.index < 19)
- s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
- s->sub.trees.bb = 7;
- t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
- &s->sub.trees.tb, z);
- if (t != Z_OK)
- {
- r = t;
- if (r == Z_DATA_ERROR)
- s->mode = BADB;
- LEAVE
- }
- s->sub.trees.index = 0;
- Tracev((stderr, "inflate: bits tree ok\n"));
- s->mode = DTREE;
- case DTREE:
- while (t = s->sub.trees.table,
- s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
- {
- inflate_huft *h;
- uInt i, j, c;
-
- t = s->sub.trees.bb;
- NEEDBITS(t)
- h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
- t = h->word.what.Bits;
- c = h->more.Base;
- if (c < 16)
- {
- DUMPBITS(t)
- s->sub.trees.blens[s->sub.trees.index++] = c;
- }
- else /* c == 16..18 */
- {
- i = c == 18 ? 7 : c - 14;
- j = c == 18 ? 11 : 3;
- NEEDBITS(t + i)
- DUMPBITS(t)
- j += (uInt)b & inflate_mask[i];
- DUMPBITS(i)
- i = s->sub.trees.index;
- t = s->sub.trees.table;
- if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
- (c == 16 && i < 1))
- {
- s->mode = BADB;
- z->msg = "invalid bit length repeat";
- r = Z_DATA_ERROR;
- LEAVE
- }
- c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
- do {
- s->sub.trees.blens[i++] = c;
- } while (--j);
- s->sub.trees.index = i;
- }
- }
- inflate_trees_free(s->sub.trees.tb, z);
- s->sub.trees.tb = Z_NULL;
- {
- uInt bl, bd;
- inflate_huft *tl, *td;
- inflate_codes_statef *c;
-
- bl = 9; /* must be <= 9 for lookahead assumptions */
- bd = 6; /* must be <= 9 for lookahead assumptions */
- t = s->sub.trees.table;
- t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
- s->sub.trees.blens, &bl, &bd, &tl, &td, z);
- if (t != Z_OK)
- {
- if (t == (uInt)Z_DATA_ERROR)
- s->mode = BADB;
- r = t;
- LEAVE
- }
- Tracev((stderr, "inflate: trees ok\n"));
- if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
- {
- inflate_trees_free(td, z);
- inflate_trees_free(tl, z);
- r = Z_MEM_ERROR;
- LEAVE
- }
- ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
- s->sub.decode.codes = c;
- s->sub.decode.tl = tl;
- s->sub.decode.td = td;
- }
- s->mode = CODES;
- case CODES:
- UPDATE
- if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
- return inflate_flush(s, z, r);
- r = Z_OK;
- inflate_codes_free(s->sub.decode.codes, z);
- inflate_trees_free(s->sub.decode.td, z);
- inflate_trees_free(s->sub.decode.tl, z);
- LOAD
- Tracev((stderr, "inflate: codes end, %lu total out\n",
- z->total_out + (q >= s->read ? q - s->read :
- (s->end - s->read) + (q - s->window))));
- if (!s->last)
- {
- s->mode = TYPE;
- break;
- }
- if (k > 7) /* return unused byte, if any */
- {
- Assert(k < 16, "inflate_codes grabbed too many bytes")
- k -= 8;
- n++;
- p--; /* can always return one */
- }
- s->mode = DRY;
- case DRY:
- FLUSH
- if (s->read != s->write)
- LEAVE
- s->mode = DONEB;
- case DONEB:
- r = Z_STREAM_END;
- LEAVE
- case BADB:
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-local int inflate_blocks_free(s, z, c)
-inflate_blocks_statef *s;
-z_stream *z;
-uLongf *c;
-{
- inflate_blocks_reset(s, z, c);
- ZFREE(z, s->window, s->end - s->window);
- ZFREE(z, s, sizeof(struct inflate_blocks_state));
- Trace((stderr, "inflate: blocks freed\n"));
- return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output. The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS). On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-local int inflate_addhistory(s, z)
-inflate_blocks_statef *s;
-z_stream *z;
-{
- uLong b; /* bit buffer */ /* NOT USED HERE */
- uInt k; /* bits in bit buffer */ /* NOT USED HERE */
- uInt t; /* temporary storage */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
-
- if (s->read != s->write)
- return Z_STREAM_ERROR;
- if (s->mode != TYPE)
- return Z_DATA_ERROR;
-
- /* we're ready to rock */
- LOAD
- /* while there is input ready, copy to output buffer, moving
- * pointers as needed.
- */
- while (n) {
- t = n; /* how many to do */
- /* is there room until end of buffer? */
- if (t > m) t = m;
- /* update check information */
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(s->check, q, t);
- zmemcpy(q, p, t);
- q += t;
- p += t;
- n -= t;
- z->total_out += t;
- s->read = q; /* drag read pointer forward */
-/* WRAP */ /* expand WRAP macro by hand to handle s->read */
- if (q == s->end) {
- s->read = q = s->window;
- m = WAVAIL;
- }
- }
- UPDATE
- return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-local int inflate_packet_flush(s)
- inflate_blocks_statef *s;
-{
- if (s->mode != LENS)
- return Z_DATA_ERROR;
- s->mode = TYPE;
- return Z_OK;
-}
-
-
-/*+++++*/
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
- uIntf *, /* code lengths in bits */
- uInt, /* number of codes */
- uInt, /* number of "simple" codes */
- uIntf *, /* list of base values for non-simple codes */
- uIntf *, /* list of extra bits for non-simple codes */
- inflate_huft * FAR*,/* result: starting table */
- uIntf *, /* maximum lookup bits (returns actual) */
- z_stream *)); /* for zalloc function */
-
-local voidpf falloc OF((
- voidpf, /* opaque pointer (not used) */
- uInt, /* number of items */
- uInt)); /* size of item */
-
-local void ffree OF((
- voidpf q, /* opaque pointer (not used) */
- voidpf p, /* what to free (not used) */
- uInt n)); /* number of bytes (not used) */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */
- 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
- 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
- /* actually lengths - 2; also see note #13 above about 258 */
-local uInt cplext[] = { /* Extra bits for literal codes 257..285 */
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
- 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
-local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */
- 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
- 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
- 8193, 12289, 16385, 24577};
-local uInt cpdext[] = { /* Extra bits for distance codes */
- 0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
- 7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
- 12, 12, 13, 13};
-
-/*
- Huffman code decoding is performed using a multi-level table lookup.
- The fastest way to decode is to simply build a lookup table whose
- size is determined by the longest code. However, the time it takes
- to build this table can also be a factor if the data being decoded
- is not very long. The most common codes are necessarily the
- shortest codes, so those codes dominate the decoding time, and hence
- the speed. The idea is you can have a shorter table that decodes the
- shorter, more probable codes, and then point to subsidiary tables for
- the longer codes. The time it costs to decode the longer codes is
- then traded against the time it takes to make longer tables.
-
- This results of this trade are in the variables lbits and dbits
- below. lbits is the number of bits the first level table for literal/
- length codes can decode in one step, and dbits is the same thing for
- the distance codes. Subsequent tables are also less than or equal to
- those sizes. These values may be adjusted either when all of the
- codes are shorter than that, in which case the longest code length in
- bits is used, or when the shortest code is *longer* than the requested
- table size, in which case the length of the shortest code in bits is
- used.
-
- There are two different values for the two tables, since they code a
- different number of possibilities each. The literal/length table
- codes 286 possible values, or in a flat code, a little over eight
- bits. The distance table codes 30 possible values, or a little less
- than five bits, flat. The optimum values for speed end up being
- about one bit more than those, so lbits is 8+1 and dbits is 5+1.
- The optimum values may differ though from machine to machine, and
- possibly even between compilers. Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15 /* maximum bit length of any code */
-#define N_MAX 288 /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
- uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
-uIntf *b; /* code lengths in bits (all assumed <= BMAX) */
-uInt n; /* number of codes (assumed <= N_MAX) */
-uInt s; /* number of simple-valued codes (0..s-1) */
-uIntf *d; /* list of base values for non-simple codes */
-uIntf *e; /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t; /* result: starting table */
-uIntf *m; /* maximum lookup bits, returns actual */
-z_stream *zs; /* for zalloc function */
-/* Given a list of code lengths and a maximum table size, make a set of
- tables to decode that set of codes. Return Z_OK on success, Z_BUF_ERROR
- if the given code set is incomplete (the tables are still built in this
- case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
- over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
- uInt a; /* counter for codes of length k */
- uInt c[BMAX+1]; /* bit length count table */
- uInt f; /* i repeats in table every f entries */
- int g; /* maximum code length */
- int h; /* table level */
- register uInt i; /* counter, current code */
- register uInt j; /* counter */
- register int k; /* number of bits in current code */
- int l; /* bits per table (returned in m) */
- register uIntf *p; /* pointer into c[], b[], or v[] */
- inflate_huft *q; /* points to current table */
- struct inflate_huft_s r; /* table entry for structure assignment */
- inflate_huft *u[BMAX]; /* table stack */
- uInt v[N_MAX]; /* values in order of bit length */
- register int w; /* bits before this table == (l * h) */
- uInt x[BMAX+1]; /* bit offsets, then code stack */
- uIntf *xp; /* pointer into x */
- int y; /* number of dummy codes added */
- uInt z; /* number of entries in current table */
-
-
- /* Generate counts for each bit length */
- p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
- C4 /* clear c[]--assume BMAX+1 is 16 */
- p = b; i = n;
- do {
- c[*p++]++; /* assume all entries <= BMAX */
- } while (--i);
- if (c[0] == n) /* null input--all zero length codes */
- {
- *t = (inflate_huft *)Z_NULL;
- *m = 0;
- return Z_OK;
- }
-
-
- /* Find minimum and maximum length, bound *m by those */
- l = *m;
- for (j = 1; j <= BMAX; j++)
- if (c[j])
- break;
- k = j; /* minimum code length */
- if ((uInt)l < j)
- l = j;
- for (i = BMAX; i; i--)
- if (c[i])
- break;
- g = i; /* maximum code length */
- if ((uInt)l > i)
- l = i;
- *m = l;
-
-
- /* Adjust last length count to fill out codes, if needed */
- for (y = 1 << j; j < i; j++, y <<= 1)
- if ((y -= c[j]) < 0)
- return Z_DATA_ERROR;
- if ((y -= c[i]) < 0)
- return Z_DATA_ERROR;
- c[i] += y;
-
-
- /* Generate starting offsets into the value table for each length */
- x[1] = j = 0;
- p = c + 1; xp = x + 2;
- while (--i) { /* note that i == g from above */
- *xp++ = (j += *p++);
- }
-
-
- /* Make a table of values in order of bit lengths */
- p = b; i = 0;
- do {
- if ((j = *p++) != 0)
- v[x[j]++] = i;
- } while (++i < n);
-
-
- /* Generate the Huffman codes and for each, make the table entries */
- x[0] = i = 0; /* first Huffman code is zero */
- p = v; /* grab values in bit order */
- h = -1; /* no tables yet--level -1 */
- w = -l; /* bits decoded == (l * h) */
- u[0] = (inflate_huft *)Z_NULL; /* just to keep compilers happy */
- q = (inflate_huft *)Z_NULL; /* ditto */
- z = 0; /* ditto */
-
- /* go through the bit lengths (k already is bits in shortest code) */
- for (; k <= g; k++)
- {
- a = c[k];
- while (a--)
- {
- /* here i is the Huffman code of length k bits for value *p */
- /* make tables up to required level */
- while (k > w + l)
- {
- h++;
- w += l; /* previous table always l bits */
-
- /* compute minimum size table less than or equal to l bits */
- z = (z = g - w) > (uInt)l ? l : z; /* table size upper limit */
- if ((f = 1 << (j = k - w)) > a + 1) /* try a k-w bit table */
- { /* too few codes for k-w bit table */
- f -= a + 1; /* deduct codes from patterns left */
- xp = c + k;
- if (j < z)
- while (++j < z) /* try smaller tables up to z bits */
- {
- if ((f <<= 1) <= *++xp)
- break; /* enough codes to use up j bits */
- f -= *xp; /* else deduct codes from patterns */
- }
- }
- z = 1 << j; /* table entries for j-bit table */
-
- /* allocate and link in new table */
- if ((q = (inflate_huft *)ZALLOC
- (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
- {
- if (h)
- inflate_trees_free(u[0], zs);
- return Z_MEM_ERROR; /* not enough memory */
- }
- q->word.Nalloc = z + 1;
-#ifdef DEBUG_ZLIB
- inflate_hufts += z + 1;
-#endif
- *t = q + 1; /* link to list for huft_free() */
- *(t = &(q->next)) = Z_NULL;
- u[h] = ++q; /* table starts after link */
-
- /* connect to last table, if there is one */
- if (h)
- {
- x[h] = i; /* save pattern for backing up */
- r.bits = (Byte)l; /* bits to dump before this table */
- r.exop = (Byte)j; /* bits in this table */
- r.next = q; /* pointer to this table */
- j = i >> (w - l); /* (get around Turbo C bug) */
- u[h-1][j] = r; /* connect to last table */
- }
- }
-
- /* set up table entry in r */
- r.bits = (Byte)(k - w);
- if (p >= v + n)
- r.exop = 128 + 64; /* out of values--invalid code */
- else if (*p < s)
- {
- r.exop = (Byte)(*p < 256 ? 0 : 32 + 64); /* 256 is end-of-block */
- r.base = *p++; /* simple code is just the value */
- }
- else
- {
- r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
- r.base = d[*p++ - s];
- }
-
- /* fill code-like entries with r */
- f = 1 << (k - w);
- for (j = i >> w; j < z; j += f)
- q[j] = r;
-
- /* backwards increment the k-bit code i */
- for (j = 1 << (k - 1); i & j; j >>= 1)
- i ^= j;
- i ^= j;
-
- /* backup over finished tables */
- while ((i & ((1 << w) - 1)) != x[h])
- {
- h--; /* don't need to update q */
- w -= l;
- }
- }
- }
-
-
- /* Return Z_BUF_ERROR if we were given an incomplete table */
- return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-local int inflate_trees_bits(c, bb, tb, z)
-uIntf *c; /* 19 code lengths */
-uIntf *bb; /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-z_stream *z; /* for zfree function */
-{
- int r;
-
- r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
- if (r == Z_DATA_ERROR)
- z->msg = "oversubscribed dynamic bit lengths tree";
- else if (r == Z_BUF_ERROR)
- {
- inflate_trees_free(*tb, z);
- z->msg = "incomplete dynamic bit lengths tree";
- r = Z_DATA_ERROR;
- }
- return r;
-}
-
-
-local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
-uInt nl; /* number of literal/length codes */
-uInt nd; /* number of distance codes */
-uIntf *c; /* that many (total) code lengths */
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_stream *z; /* for zfree function */
-{
- int r;
-
- /* build literal/length tree */
- if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
- {
- if (r == Z_DATA_ERROR)
- z->msg = "oversubscribed literal/length tree";
- else if (r == Z_BUF_ERROR)
- {
- inflate_trees_free(*tl, z);
- z->msg = "incomplete literal/length tree";
- r = Z_DATA_ERROR;
- }
- return r;
- }
-
- /* build distance tree */
- if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
- {
- if (r == Z_DATA_ERROR)
- z->msg = "oversubscribed literal/length tree";
- else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
- r = Z_OK;
- }
-#else
- inflate_trees_free(*td, z);
- z->msg = "incomplete literal/length tree";
- r = Z_DATA_ERROR;
- }
- inflate_trees_free(*tl, z);
- return r;
-#endif
- }
-
- /* done */
- return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_lock = 0;
-local int fixed_built = 0;
-#define FIXEDH 530 /* number of hufts used by fixed tables */
-local uInt fixed_left = FIXEDH;
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(q, n, s)
-voidpf q; /* opaque pointer (not used) */
-uInt n; /* number of items */
-uInt s; /* size of item */
-{
- Assert(s == sizeof(inflate_huft) && n <= fixed_left,
- "inflate_trees falloc overflow");
- if (q) s++; /* to make some compilers happy */
- fixed_left -= n;
- return (voidpf)(fixed_mem + fixed_left);
-}
-
-
-local void ffree(q, p, n)
-voidpf q;
-voidpf p;
-uInt n;
-{
- Assert(0, "inflate_trees ffree called!");
- if (q) q = p; /* to make some compilers happy */
-}
-
-
-local int inflate_trees_fixed(bl, bd, tl, td)
-uIntf *bl; /* literal desired/actual bit depth */
-uIntf *bd; /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-{
- /* build fixed tables if not built already--lock out other instances */
- while (++fixed_lock > 1)
- fixed_lock--;
- if (!fixed_built)
- {
- int k; /* temporary variable */
- unsigned c[288]; /* length list for huft_build */
- z_stream z; /* for falloc function */
-
- /* set up fake z_stream for memory routines */
- z.zalloc = falloc;
- z.zfree = ffree;
- z.opaque = Z_NULL;
-
- /* literal table */
- for (k = 0; k < 144; k++)
- c[k] = 8;
- for (; k < 256; k++)
- c[k] = 9;
- for (; k < 280; k++)
- c[k] = 7;
- for (; k < 288; k++)
- c[k] = 8;
- fixed_bl = 7;
- huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
- /* distance table */
- for (k = 0; k < 30; k++)
- c[k] = 5;
- fixed_bd = 5;
- huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
- /* done */
- fixed_built = 1;
- }
- fixed_lock--;
- *bl = fixed_bl;
- *bd = fixed_bd;
- *tl = fixed_tl;
- *td = fixed_td;
- return Z_OK;
-}
-
-
-local int inflate_trees_free(t, z)
-inflate_huft *t; /* table to free */
-z_stream *z; /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
- list of the tables it made, with the links in a dummy first entry of
- each table. */
-{
- register inflate_huft *p, *q;
-
- /* Go through linked list, freeing from the malloced (t[-1]) address. */
- p = t;
- while (p != Z_NULL)
- {
- q = (--p)->next;
- ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft));
- p = q;
- }
- return Z_OK;
-}
-
-/*+++++*/
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
- /* mode */
- enum { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- START, /* x: set up for LEN */
- LEN, /* i: get length/literal/eob next */
- LENEXT, /* i: getting length extra (have base) */
- DIST, /* i: get distance next */
- DISTEXT, /* i: getting distance extra */
- COPY, /* o: copying bytes in window, waiting for space */
- LIT, /* o: got literal, waiting for output space */
- WASH, /* o: got eob, possibly still output waiting */
- END, /* x: got eob and all data flushed */
- BADCODE} /* x: got error */
- mode; /* current inflate_codes mode */
-
- /* mode dependent information */
- uInt len;
- union {
- struct {
- inflate_huft *tree; /* pointer into tree */
- uInt need; /* bits needed */
- } code; /* if LEN or DIST, where in tree */
- uInt lit; /* if LIT, literal */
- struct {
- uInt get; /* bits to get for extra */
- uInt dist; /* distance back to copy from */
- } copy; /* if EXT or COPY, where and how much */
- } sub; /* submode */
-
- /* mode independent information */
- Byte lbits; /* ltree bits decoded per branch */
- Byte dbits; /* dtree bits decoder per branch */
- inflate_huft *ltree; /* literal/length/eob tree */
- inflate_huft *dtree; /* distance tree */
-
-};
-
-
-local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl, *td;
-z_stream *z;
-{
- inflate_codes_statef *c;
-
- if ((c = (inflate_codes_statef *)
- ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
- {
- c->mode = START;
- c->lbits = (Byte)bl;
- c->dbits = (Byte)bd;
- c->ltree = tl;
- c->dtree = td;
- Tracev((stderr, "inflate: codes new\n"));
- }
- return c;
-}
-
-
-local int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
- uInt j; /* temporary storage */
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- Bytef *f; /* pointer to copy strings from */
- inflate_codes_statef *c = s->sub.decode.codes; /* codes state */
-
- /* copy input/output information to locals (UPDATE macro restores) */
- LOAD
-
- /* process input and output based on current state */
- while (1) switch (c->mode)
- { /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
- case START: /* x: set up for LEN */
-#ifndef SLOW
- if (m >= 258 && n >= 10)
- {
- UPDATE
- r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
- LOAD
- if (r != Z_OK)
- {
- c->mode = r == Z_STREAM_END ? WASH : BADCODE;
- break;
- }
- }
-#endif /* !SLOW */
- c->sub.code.need = c->lbits;
- c->sub.code.tree = c->ltree;
- c->mode = LEN;
- case LEN: /* i: get length/literal/eob next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e == 0) /* literal */
- {
- c->sub.lit = t->base;
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", t->base));
- c->mode = LIT;
- break;
- }
- if (e & 16) /* length */
- {
- c->sub.copy.get = e & 15;
- c->len = t->base;
- c->mode = LENEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t->next;
- break;
- }
- if (e & 32) /* end of block */
- {
- Tracevv((stderr, "inflate: end of block\n"));
- c->mode = WASH;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = "invalid literal/length code";
- r = Z_DATA_ERROR;
- LEAVE
- case LENEXT: /* i: getting length extra (have base) */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->len += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- c->sub.code.need = c->dbits;
- c->sub.code.tree = c->dtree;
- Tracevv((stderr, "inflate: length %u\n", c->len));
- c->mode = DIST;
- case DIST: /* i: get distance next */
- j = c->sub.code.need;
- NEEDBITS(j)
- t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
- DUMPBITS(t->bits)
- e = (uInt)(t->exop);
- if (e & 16) /* distance */
- {
- c->sub.copy.get = e & 15;
- c->sub.copy.dist = t->base;
- c->mode = DISTEXT;
- break;
- }
- if ((e & 64) == 0) /* next table */
- {
- c->sub.code.need = e;
- c->sub.code.tree = t->next;
- break;
- }
- c->mode = BADCODE; /* invalid code */
- z->msg = "invalid distance code";
- r = Z_DATA_ERROR;
- LEAVE
- case DISTEXT: /* i: getting distance extra */
- j = c->sub.copy.get;
- NEEDBITS(j)
- c->sub.copy.dist += (uInt)b & inflate_mask[j];
- DUMPBITS(j)
- Tracevv((stderr, "inflate: distance %u\n", c->sub.copy.dist));
- c->mode = COPY;
- case COPY: /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
- f = (uInt)(q - s->window) < c->sub.copy.dist ?
- s->end - (c->sub.copy.dist - (q - s->window)) :
- q - c->sub.copy.dist;
-#else
- f = q - c->sub.copy.dist;
- if ((uInt)(q - s->window) < c->sub.copy.dist)
- f = s->end - (c->sub.copy.dist - (q - s->window));
-#endif
- while (c->len)
- {
- NEEDOUT
- OUTBYTE(*f++)
- if (f == s->end)
- f = s->window;
- c->len--;
- }
- c->mode = START;
- break;
- case LIT: /* o: got literal, waiting for output space */
- NEEDOUT
- OUTBYTE(c->sub.lit)
- c->mode = START;
- break;
- case WASH: /* o: got eob, possibly more output */
- FLUSH
- if (s->read != s->write)
- LEAVE
- c->mode = END;
- case END:
- r = Z_STREAM_END;
- LEAVE
- case BADCODE: /* x: got error */
- r = Z_DATA_ERROR;
- LEAVE
- default:
- r = Z_STREAM_ERROR;
- LEAVE
- }
-}
-
-
-local void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_stream *z;
-{
- ZFREE(z, c, sizeof(struct inflate_codes_state));
- Tracev((stderr, "inflate: codes free\n"));
-}
-
-/*+++++*/
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
- uInt n;
- Bytef *p, *q;
-
- /* local copies of source and destination pointers */
- p = z->next_out;
- q = s->read;
-
- /* compute number of bytes to copy as far as end of window */
- n = (uInt)((q <= s->write ? s->write : s->end) - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy as far as end of window */
- if (p != NULL) {
- zmemcpy(p, q, n);
- p += n;
- }
- q += n;
-
- /* see if more to copy at beginning of window */
- if (q == s->end)
- {
- /* wrap pointers */
- q = s->window;
- if (s->write == s->end)
- s->write = s->window;
-
- /* compute bytes to copy */
- n = (uInt)(s->write - q);
- if (n > z->avail_out) n = z->avail_out;
- if (n && r == Z_BUF_ERROR) r = Z_OK;
-
- /* update counters */
- z->avail_out -= n;
- z->total_out += n;
-
- /* update check information */
- if (s->checkfn != Z_NULL)
- s->check = (*s->checkfn)(s->check, q, n);
-
- /* copy */
- if (p != NULL) {
- zmemcpy(p, q, n);
- p += n;
- }
- q += n;
- }
-
- /* update pointers */
- z->next_out = p;
- s->read = q;
-
- /* done */
- return r;
-}
-
-
-/*+++++*/
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
- (the maximum string length) and number of input bytes available
- at least ten. The ten bytes are six bytes for the longest length/
- distance pair plus four bytes for overloading the bit buffer. */
-
-local int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl, *td;
-inflate_blocks_statef *s;
-z_stream *z;
-{
- inflate_huft *t; /* temporary pointer */
- uInt e; /* extra bits or operation */
- uLong b; /* bit buffer */
- uInt k; /* bits in bit buffer */
- Bytef *p; /* input data pointer */
- uInt n; /* bytes available there */
- Bytef *q; /* output window write pointer */
- uInt m; /* bytes to end of window or read pointer */
- uInt ml; /* mask for literal/length tree */
- uInt md; /* mask for distance tree */
- uInt c; /* bytes to copy */
- uInt d; /* distance back to copy from */
- Bytef *r; /* copy source pointer */
-
- /* load input, output, bit values */
- LOAD
-
- /* initialize masks */
- ml = inflate_mask[bl];
- md = inflate_mask[bd];
-
- /* do until not enough input or output space for fast loop */
- do { /* assume called with m >= 258 && n >= 10 */
- /* get literal/length code */
- GRABBITS(20) /* max bits for literal/length code */
- if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- continue;
- }
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits for length */
- e &= 15;
- c = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * length %u\n", c));
-
- /* decode distance base of block to copy */
- GRABBITS(15); /* max bits for distance code */
- e = (t = td + ((uInt)b & md))->exop;
- do {
- DUMPBITS(t->bits)
- if (e & 16)
- {
- /* get extra bits to add to distance base */
- e &= 15;
- GRABBITS(e) /* get extra bits (up to 13) */
- d = t->base + ((uInt)b & inflate_mask[e]);
- DUMPBITS(e)
- Tracevv((stderr, "inflate: * distance %u\n", d));
-
- /* do the copy */
- m -= c;
- if ((uInt)(q - s->window) >= d) /* offset before dest */
- { /* just copy */
- r = q - d;
- *q++ = *r++; c--; /* minimum count is three, */
- *q++ = *r++; c--; /* so unroll loop a little */
- }
- else /* else offset after destination */
- {
- e = d - (q - s->window); /* bytes from offset to end */
- r = s->end - e; /* pointer to offset */
- if (c > e) /* if source crosses, */
- {
- c -= e; /* copy to end of window */
- do {
- *q++ = *r++;
- } while (--e);
- r = s->window; /* copy rest from start of window */
- }
- }
- do { /* copy all or what's left */
- *q++ = *r++;
- } while (--c);
- break;
- }
- else if ((e & 64) == 0)
- e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
- else
- {
- z->msg = "invalid distance code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- break;
- }
- if ((e & 64) == 0)
- {
- if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
- {
- DUMPBITS(t->bits)
- Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
- "inflate: * literal '%c'\n" :
- "inflate: * literal 0x%02x\n", t->base));
- *q++ = (Byte)t->base;
- m--;
- break;
- }
- }
- else if (e & 32)
- {
- Tracevv((stderr, "inflate: * end of block\n"));
- UNGRAB
- UPDATE
- return Z_STREAM_END;
- }
- else
- {
- z->msg = "invalid literal/length code";
- UNGRAB
- UPDATE
- return Z_DATA_ERROR;
- }
- } while (1);
- } while (m >= 258 && n >= 10);
-
- /* not enough input or output--restore pointers and return */
- UNGRAB
- UPDATE
- return Z_OK;
-}
-
-
-/*+++++*/
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */
-
-char *zlib_version = ZLIB_VERSION;
-
-char *z_errmsg[] = {
-"stream end", /* Z_STREAM_END 1 */
-"", /* Z_OK 0 */
-"file error", /* Z_ERRNO (-1) */
-"stream error", /* Z_STREAM_ERROR (-2) */
-"data error", /* Z_DATA_ERROR (-3) */
-"insufficient memory", /* Z_MEM_ERROR (-4) */
-"buffer error", /* Z_BUF_ERROR (-5) */
-""};
-
-
-/*+++++*/
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf) {s1 += *buf++; s2 += s1;}
-#define DO2(buf) DO1(buf); DO1(buf);
-#define DO4(buf) DO2(buf); DO2(buf);
-#define DO8(buf) DO4(buf); DO4(buf);
-#define DO16(buf) DO8(buf); DO8(buf);
-
-/* ========================================================================= */
-uLong adler32(adler, buf, len)
- uLong adler;
- Bytef *buf;
- uInt len;
-{
- unsigned long s1 = adler & 0xffff;
- unsigned long s2 = (adler >> 16) & 0xffff;
- int k;
-
- if (buf == Z_NULL) return 1L;
-
- while (len > 0) {
- k = len < NMAX ? len : NMAX;
- len -= k;
- while (k >= 16) {
- DO16(buf);
- k -= 16;
- }
- if (k != 0) do {
- DO1(buf);
- } while (--k);
- s1 %= BASE;
- s2 %= BASE;
- }
- return (s2 << 16) | s1;
-}
diff --git a/mdk-stage1/ppp/pppdump/zlib.h b/mdk-stage1/ppp/pppdump/zlib.h
deleted file mode 100644
index 9c7ac734d..000000000
--- a/mdk-stage1/ppp/pppdump/zlib.h
+++ /dev/null
@@ -1,631 +0,0 @@
-/* $Id$ */
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 0.95, Aug 16th, 1995.
-
- Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- gzip@prep.ai.mit.edu madler@alumni.caltech.edu
- */
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-/* #include "zconf.h" */ /* included directly here */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
-
-/*
- The library does not install any signal handler. It is recommended to
- add at least a handler for SIGSEGV when decompressing; the library checks
- the consistency of the input data whenever possible but may go nuts
- for some forms of corrupted input.
- */
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
- * at addresses which are not a multiple of their size.
- * Under DOS, -DFAR=far or -DFAR=__far may be needed.
- */
-
-#ifndef STDC
-# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
-# define STDC
-# endif
-#endif
-
-#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-# include <unix.h>
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-# ifdef MAXSEG_64K
-# define MAX_MEM_LEVEL 8
-# else
-# define MAX_MEM_LEVEL 9
-# endif
-#endif
-
-#ifndef FAR
-# define FAR
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-# define MAX_WBITS 15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
- 1 << (windowBits+2) + 1 << (memLevel+9)
- that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
- make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
- The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
- /* Type declarations */
-
-#ifndef OF /* function prototypes */
-# ifdef STDC
-# define OF(args) args
-# else
-# define OF(args) ()
-# endif
-#endif
-
-typedef unsigned char Byte; /* 8 bits */
-typedef unsigned int uInt; /* 16 bits or more */
-typedef unsigned long uLong; /* 32 bits or more */
-
-typedef Byte FAR Bytef;
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
- typedef void FAR *voidpf;
- typedef void *voidp;
-#else
- typedef Byte FAR *voidpf;
- typedef Byte *voidp;
-#endif
-
-/* end of original zconf.h */
-
-#define ZLIB_VERSION "0.95P"
-
-/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms may be added later and will have the same
- stream interface.
-
- For compression the application must provide the output buffer and
- may optionally provide the input buffer for optimization. For decompression,
- the application must provide the input buffer and may optionally provide
- the output buffer for optimization.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes));
-
-struct internal_state;
-
-typedef struct z_stream_s {
- Bytef *next_in; /* next input byte */
- uInt avail_in; /* number of bytes available at next_in */
- uLong total_in; /* total nb of input bytes read so far */
-
- Bytef *next_out; /* next output byte should be put there */
- uInt avail_out; /* remaining free space at next_out */
- uLong total_out; /* total nb of bytes output so far */
-
- char *msg; /* last error message, NULL if no error */
- struct internal_state FAR *state; /* not visible by applications */
-
- alloc_func zalloc; /* used to allocate the internal state */
- free_func zfree; /* used to free the internal state */
- voidp opaque; /* private data object passed to zalloc and zfree */
-
- Byte data_type; /* best guess about the data type: ascii or binary */
-
-} z_stream;
-
-/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
-
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- opaque value.
-
- zalloc must return Z_NULL if there is not enough memory for the object.
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
-*/
-
- /* constants */
-
-#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1
-#define Z_FULL_FLUSH 2
-#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */
-#define Z_FINISH 4
-#define Z_PACKET_FLUSH 5
-/* See deflate() below for the usage of these constants */
-
-#define Z_OK 0
-#define Z_STREAM_END 1
-#define Z_ERRNO (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR (-3)
-#define Z_MEM_ERROR (-4)
-#define Z_BUF_ERROR (-5)
-/* error codes for the compression/decompression functions */
-
-#define Z_BEST_SPEED 1
-#define Z_BEST_COMPRESSION 9
-#define Z_DEFAULT_COMPRESSION (-1)
-/* compression levels */
-
-#define Z_FILTERED 1
-#define Z_HUFFMAN_ONLY 2
-#define Z_DEFAULT_STRATEGY 0
-
-#define Z_BINARY 0
-#define Z_ASCII 1
-#define Z_UNKNOWN 2
-/* Used to set the data_type field */
-
-#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
-
-extern char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- */
-
- /* basic functions */
-
-extern int deflateInit OF((z_stream *strm, int level));
-/*
- Initializes the internal stream state for compression. The fields
- zalloc, zfree and opaque must be initialized before by the caller.
- If zalloc and zfree are set to Z_NULL, deflateInit updates them to
- use default allocation functions.
-
- The compression level must be Z_DEFAULT_COMPRESSION, or between 1 and 9:
- 1 gives best speed, 9 gives best compression. Z_DEFAULT_COMPRESSION requests
- a default compromise between speed and compression (currently equivalent
- to level 6).
-
- deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if level is not a valid compression level.
- msg is set to null if there is no error message. deflateInit does not
- perform any compression: this will be done by deflate().
-*/
-
-
-extern int deflate OF((z_stream *strm, int flush));
-/*
- Performs one or both of the following actions:
-
- - Compress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in and avail_in are updated and
- processing will resume at this point for the next call of deflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. This action is forced if the parameter flush is non zero.
- Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
-
- Before the call of deflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating avail_in or avail_out accordingly; avail_out
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (avail_out == 0), or after each call of deflate().
-
- If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
- block is terminated and flushed to the output buffer so that the
- decompressor can get all input data available so far. For method 9, a future
- variant on method 8, the current block will be flushed but not terminated.
- If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
- special marker is output and the compression dictionary is discarded; this
- is useful to allow the decompressor to synchronize if one compressed block
- has been damaged (see inflateSync below). Flushing degrades compression and
- so should be used only when necessary. Using Z_FULL_FLUSH too often can
- seriously degrade the compression. If deflate returns with avail_out == 0,
- this function must be called again with the same value of the flush
- parameter and more output space (updated avail_out), until the flush is
- complete (deflate returns with non-zero avail_out).
-
- If the parameter flush is set to Z_PACKET_FLUSH, the compression
- block is terminated, and a zero-length stored block is output,
- omitting the length bytes (the effect of this is that the 3-bit type
- code 000 for a stored block is output, and the output is then
- byte-aligned). This is designed for use at the end of a PPP packet.
- In addition, if the current compression block contains all the data
- since the last Z_PACKET_FLUSH, it is never output as a stored block.
- If the current compression block output as a static or dynamic block
- would not be at least `minCompression' bytes smaller than the
- original data, then nothing is output for that block. (The type
- code for the zero-length stored block is still output, resulting in
- a single zero byte being output for the whole packet.)
- `MinCompression' is a parameter to deflateInit2, or 0 if deflateInit
- is used.
-
- If the parameter flush is set to Z_FINISH, all pending input is processed,
- all pending output is flushed and deflate returns with Z_STREAM_END if there
- was enough output space; if deflate returns with Z_OK, this function must be
- called again with Z_FINISH and more output space (updated avail_out) but no
- more input data, until it returns with Z_STREAM_END or an error. After
- deflate has returned Z_STREAM_END, the only possible operations on the
- stream are deflateReset or deflateEnd.
-
- Z_FINISH can be used immediately after deflateInit if all the compression
- is to be done in a single step. In this case, avail_out must be at least
- 0.1% larger than avail_in plus 12 bytes. If deflate does not return
- Z_STREAM_END, then it must be called again as described above.
-
- deflate() may update data_type if it can make a good guess about
- the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
-
- deflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if all input has been
- consumed and all output has been produced (only when flush is set to
- Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
- if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int deflateEnd OF((z_stream *strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
- stream state was inconsistent. In the error case, msg may be set
- but then points to a static string (which must not be deallocated).
-*/
-
-
-extern int inflateInit OF((z_stream *strm));
-/*
- Initializes the internal stream state for decompression. The fields
- zalloc and zfree must be initialized before by the caller. If zalloc and
- zfree are set to Z_NULL, inflateInit updates them to use default allocation
- functions.
-
- inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory. msg is set to null if there is no error message.
- inflateInit does not perform any decompression: this will be done by
- inflate().
-*/
-
-
-extern int inflate OF((z_stream *strm, int flush));
-/*
- Performs one or both of the following actions:
-
- - Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
-
- - Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() always provides as much output as possible
- (until there is no more input data or no more space in the output buffer).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate().
-
- If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
- inflate flushes as much output as possible to the output buffer. The
- flushing behavior of inflate is not specified for values of the flush
- parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
- current implementation actually flushes as much output as possible
- anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data
- has been consumed, it is expecting to see the length field of a stored
- block; if not, it returns Z_DATA_ERROR.
-
- inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster routine
- may be used for the single inflate() call.
-
- inflate() returns Z_OK if some progress has been made (more input
- processed or more output produced), Z_STREAM_END if the end of the
- compressed data has been reached and all uncompressed output has been
- produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
- the stream structure was inconsistent (for example if next_in or next_out
- was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
- progress is possible or if there was not enough room in the output buffer
- when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
- call inflateSync to look for a good compression block. */
-
-
-extern int inflateEnd OF((z_stream *strm));
-/*
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
-
- inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
- static string (which must not be deallocated).
-*/
-
- /* advanced functions */
-
-/*
- The following functions are needed only in some special applications.
-*/
-
-extern int deflateInit2 OF((z_stream *strm,
- int level,
- int method,
- int windowBits,
- int memLevel,
- int strategy,
- int minCompression));
-/*
- This is another version of deflateInit with more compression options. The
- fields next_in, zalloc and zfree must be initialized before by the caller.
-
- The method parameter is the compression method. It must be 8 in this
- version of the library. (Method 9 will allow a 64K history buffer and
- partial block flushes.)
-
- The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library (the value 16 will be allowed for method 9). Larger
- values of this parameter result in better compression at the expense of
- memory usage. The default value is 15 if deflateInit is used instead.
-
- The memLevel parameter specifies how much memory should be allocated
- for the internal compression state. memLevel=1 uses minimum memory but
- is slow and reduces compression ratio; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.
-
- The strategy parameter is used to tune the compression algorithm. Use
- the value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data
- produced by a filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman
- encoding only (no string match). Filtered data consists mostly of small
- values with a somewhat random distribution. In this case, the
- compression algorithm is tuned to compress them better. The strategy
- parameter only affects the compression ratio but not the correctness of
- the compressed output even if it is not set appropriately.
-
- The minCompression parameter specifies the minimum reduction in size
- required for a compressed block to be output when Z_PACKET_FLUSH is
- used (see the description of deflate above).
-
- If next_in is not null, the library will use this buffer to hold also
- some history information; the buffer must either hold the entire input
- data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
- is null, the library will allocate its own history buffer (and leave next_in
- null). next_out need not be provided here but must be provided by the
- application for the next call of deflate().
-
- If the history buffer is provided by the application, next_in must
- must never be changed by the application since the compressor maintains
- information inside this buffer from call to call; the application
- must provide more input only by increasing avail_in. next_in is always
- reset by the library in this case.
-
- deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
- not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
- an invalid method). msg is set to null if there is no error message.
- deflateInit2 does not perform any compression: this will be done by
- deflate().
-*/
-
-extern int deflateCopy OF((z_stream *dest,
- z_stream *source));
-/*
- Sets the destination stream as a complete copy of the source stream. If
- the source stream is using an application-supplied history buffer, a new
- buffer is allocated for the destination stream. The compressed output
- buffer is always application-supplied. It's the responsibility of the
- application to provide the correct values of next_out and avail_out for the
- next call of deflate.
-
- This function is useful when several compression strategies will be
- tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
- by calling deflateEnd. Note that deflateCopy duplicates the internal
- compression state which can be quite large, so this strategy is slow and
- can consume lots of memory.
-
- deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
- destination.
-*/
-
-extern int deflateReset OF((z_stream *strm));
-/*
- This function is equivalent to deflateEnd followed by deflateInit,
- but does not free and reallocate all the internal compression state.
- The stream will keep the same compression level and any other attributes
- that may have been set by deflateInit2.
-
- deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateInit2 OF((z_stream *strm,
- int windowBits));
-/*
- This is another version of inflateInit with more compression options. The
- fields next_out, zalloc and zfree must be initialized before by the caller.
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library (the value 16 will be allowed soon). The
- default value is 15 if inflateInit is used instead. If a compressed stream
- with a larger window size is given as input, inflate() will return with
- the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
- If next_out is not null, the library will use this buffer for the history
- buffer; the buffer must either be large enough to hold the entire output
- data, or have at least 1<<windowBits bytes. If next_out is null, the
- library will allocate its own buffer (and leave next_out null). next_in
- need not be provided here but must be provided by the application for the
- next call of inflate().
-
- If the history buffer is provided by the application, next_out must
- never be changed by the application since the decompressor maintains
- history information inside this buffer from call to call; the application
- can only reset next_out to the beginning of the history buffer when
- avail_out is zero and all output has been consumed.
-
- inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
- not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
- windowBits < 8). msg is set to null if there is no error message.
- inflateInit2 does not perform any decompression: this will be done by
- inflate().
-*/
-
-extern int inflateSync OF((z_stream *strm));
-/*
- Skips invalid compressed data until the special marker (see deflate()
- above) can be found, or until all available input is skipped. No output
- is provided.
-
- inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no marker has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
-*/
-
-extern int inflateReset OF((z_stream *strm));
-/*
- This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
-
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
- This function adds the data at next_in (avail_in bytes) to the output
- history without performing any output. There must be no pending output,
- and the decompressor must be expecting to see the start of a block.
- Calling this function is equivalent to decompressing a stored block
- containing the data at next_in (except that the data is not output).
-*/
-
- /* checksum functions */
-
-/*
- This function is not related to compression but is exported
- anyway because it might be useful in applications using the
- compression library.
-*/
-
-extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
-
-/*
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
-
- uLong adler = adler32(0L, Z_NULL, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- adler = adler32(adler, buffer, length);
- }
- if (adler != original_adler) error();
-*/
-
-#ifndef _Z_UTIL_H
- struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-#endif /* _ZLIB_H */
diff --git a/mdk-stage1/ppp/pppstats/Makefile.linux b/mdk-stage1/ppp/pppstats/Makefile.linux
deleted file mode 100644
index ef0764c5d..000000000
--- a/mdk-stage1/ppp/pppstats/Makefile.linux
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# pppstats makefile
-# $Id$
-#
-
-PPPSTATSRCS = pppstats.c
-PPPSTATOBJS = pppstats.o
-
-#CC = gcc
-COPTS = -O
-COMPILE_FLAGS = -D_linux_ -I../include
-LIBS =
-
-INSTALL= install -o root -g daemon
-
-CFLAGS = $(COPTS) $(COMPILE_FLAGS)
-
-all: pppstats
-
-install: pppstats
- $(INSTALL) -s -c pppstats $(BINDIR)/pppstats
- $(INSTALL) -c -m 444 pppstats.8 $(MANDIR)/man8/pppstats.8
-
-pppstats: $(PPPSTATSRCS)
- $(CC) $(CFLAGS) -o pppstats pppstats.c $(LIBS)
-
-clean:
- rm -f pppstats *~ #* core
-
-depend:
- cpp -M $(CFLAGS) $(PPPSTATSRCS) >.depend
-# makedepend $(CFLAGS) $(PPPSTATSRCS)
diff --git a/mdk-stage1/ppp/pppstats/Makefile.sol2 b/mdk-stage1/ppp/pppstats/Makefile.sol2
deleted file mode 100644
index a6544e61b..000000000
--- a/mdk-stage1/ppp/pppstats/Makefile.sol2
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# pppstats Makefile for SVR4 systems
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-CFLAGS = -DSTREAMS -I../include $(COPTS)
-
-all: pppstats
-
-pppstats: pppstats.c
- $(CC) $(CFLAGS) -o pppstats pppstats.c
-
-install: pppstats
- $(INSTALL) -f $(BINDIR) pppstats
- $(INSTALL) -m 444 -f $(MANDIR)/man8 pppstats.8
-
-clean:
- rm -f pppstats *~ core
diff --git a/mdk-stage1/ppp/pppstats/Makefile.sunos4 b/mdk-stage1/ppp/pppstats/Makefile.sunos4
deleted file mode 100644
index 2a036f28f..000000000
--- a/mdk-stage1/ppp/pppstats/Makefile.sunos4
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# pppstats makefile
-# $Id$
-#
-
-include ../sunos4/Makedefs
-
-PPPSTATSRCS = pppstats.c
-PPPSTATOBJS = pppstats.o
-
-COMPILE_FLAGS = -DSTREAMS -DSUNOS4
-LIBS =
-
-CFLAGS = -I../include $(COPTS) $(COMPILE_FLAGS)
-
-all: pppstats
-
-install: pppstats
- $(INSTALL) -c pppstats $(BINDIR)/pppstats
- $(INSTALL) -c -m 444 pppstats.8 $(MANDIR)/man8/pppstats.8
-
-pppstats: $(PPPSTATSRCS)
- $(CC) $(CFLAGS) -o pppstats pppstats.c $(LIBS)
-
-clean:
- rm -f pppstats *~ #* core
-
-depend:
- cpp -M $(CFLAGS) $(PPPSTATSRCS) >.depend
-# makedepend $(CFLAGS) $(PPPSTATSRCS)
diff --git a/mdk-stage1/ppp/pppstats/pppstats.8 b/mdk-stage1/ppp/pppstats/pppstats.8
deleted file mode 100644
index 1ba8d5779..000000000
--- a/mdk-stage1/ppp/pppstats/pppstats.8
+++ /dev/null
@@ -1,217 +0,0 @@
-.\" @(#) $Id$
-.TH PPPSTATS 8 "26 June 1995"
-.SH NAME
-pppstats \- print PPP statistics
-.SH SYNOPSIS
-.B pppstats
-[
-.B -a
-] [
-.B -v
-] [
-.B -r
-] [
-.B -z
-] [
-.B -c
-.I <count>
-] [
-.B -w
-.I <secs>
-] [
-.I interface
-]
-.ti 12
-.SH DESCRIPTION
-The
-.B pppstats
-utility reports PPP-related statistics at regular intervals for the
-specified PPP interface. If the interface is unspecified, it will
-default to ppp0.
-The display is split horizontally
-into input and output sections containing columns of statistics
-describing the properties and volume of packets received and
-transmitted by the interface.
-.PP
-The options are as follows:
-.TP
-.B -a
-Display absolute values rather than deltas. With this option, all
-reports show statistics for the time since the link was initiated.
-Without this option, the second and subsequent reports show statistics
-for the time since the last report.
-.TP
-.B -c \fIcount
-Repeat the display
-.I count
-times. If this option is not specified, the default repeat count is 1
-if the
-.B -w
-option is not specified, otherwise infinity.
-.TP
-.B -r
-Display additional statistics summarizing the compression ratio
-achieved by the packet compression algorithm in use.
-.TP
-.B -v
-Display additional statistics relating to the performance of the Van
-Jacobson TCP header compression algorithm.
-.TP
-.B -w \fIwait
-Pause
-.I wait
-seconds between each display. If this option is not specified, the
-default interval is 5 seconds.
-.TP
-.B -z
-Instead of the standard display, show statistics indicating the
-performance of the packet compression algorithm in use.
-.PP
-The following fields are printed on the input side when the
-.B -z
-option is not used:
-.TP
-.B IN
-The total number of bytes received by this interface.
-.TP
-.B PACK
-The total number of packets received by this interface.
-.TP
-.B VJCOMP
-The number of header-compressed TCP packets received by this interface.
-.TP
-.B VJUNC
-The number of header-uncompressed TCP packets received by this
-interface. Not reported when the
-.B -r
-option is specified.
-.TP
-.B VJERR
-The number of corrupted or bogus header-compressed TCP packets
-received by this interface. Not reported when the
-.B -r
-option is specified.
-.TP
-.B VJTOSS
-The number of VJ header-compressed TCP packets dropped on reception by
-this interface because of preceding errors. Only reported when the
-.B -v
-option is specified.
-.TP
-.B NON-VJ
-The total number of non-TCP packets received by this interface. Only
-reported when the
-.B -v
-option is specified.
-.TP
-.B RATIO
-The compression ratio achieved for received packets by the
-packet compression scheme in use, defined as the uncompressed size
-divided by the compressed size.
-Only reported when the
-.B -r
-option is specified.
-.TP
-.B UBYTE
-The total number of bytes received, after decompression of compressed
-packets. Only reported when the
-.B -r
-option is specified.
-.PP
-The following fields are printed on the output side:
-.TP
-.B OUT
-The total number of bytes transmitted from this interface.
-.TP
-.B PACK
-The total number of packets transmitted from this interface.
-.TP
-.B VJCOMP
-The number of TCP packets transmitted from this interface with
-VJ-compressed TCP headers.
-.TP
-.B VJUNC
-The number of TCP packets transmitted from this interface with
-VJ-uncompressed TCP headers.
-Not reported when the
-.B -r
-option is specified.
-.TP
-.B NON-VJ
-The total number of non-TCP packets transmitted from this interface.
-Not reported when the
-.B -r
-option is specified.
-.TP
-.B VJSRCH
-The number of searches for the cached header entry for a VJ header
-compressed TCP packet. Only reported when the
-.B -v
-option is specified.
-.TP
-.B VJMISS
-The number of failed searches for the cached header entry for a
-VJ header compressed TCP packet. Only reported when the
-.B -v
-option is specified.
-.TP
-.B RATIO
-The compression ratio achieved for transmitted packets by the
-packet compression scheme in use, defined as the size
-before compression divided by the compressed size.
-Only reported when the
-.B -r
-option is specified.
-.TP
-.B UBYTE
-The total number of bytes to be transmitted, before packet compression
-is applied. Only reported when the
-.B -r
-option is specified.
-.PP
-When the
-.B -z
-option is specified,
-.Nm pppstats
-instead displays the following fields, relating to the packet
-compression algorithm currently in use. If packet compression is not
-in use, these fields will all display zeroes. The fields displayed on
-the input side are:
-.TP
-.B COMPRESSED BYTE
-The number of bytes of compressed packets received.
-.TP
-.B COMPRESSED PACK
-The number of compressed packets received.
-.TP
-.B INCOMPRESSIBLE BYTE
-The number of bytes of incompressible packets (that is, those which
-were transmitted in uncompressed form) received.
-.TP
-.B INCOMPRESSIBLE PACK
-The number of incompressible packets received.
-.TP
-.B COMP RATIO
-The recent compression ratio for incoming packets, defined as the
-uncompressed size divided by the compressed size (including both
-compressible and incompressible packets).
-.PP
-The fields displayed on the output side are:
-.TP
-.B COMPRESSED BYTE
-The number of bytes of compressed packets transmitted.
-.TP
-.B COMPRESSED PACK
-The number of compressed packets transmitted.
-.TP
-.B INCOMPRESSIBLE BYTE
-The number of bytes of incompressible packets transmitted (that is,
-those which were transmitted in uncompressed form).
-.TP
-.B INCOMPRESSIBLE PACK
-The number of incompressible packets transmitted.
-.TP
-.B COMP RATIO
-The recent compression ratio for outgoing packets.
-.SH SEE ALSO
-pppd(8)
diff --git a/mdk-stage1/ppp/pppstats/pppstats.c b/mdk-stage1/ppp/pppstats/pppstats.c
deleted file mode 100644
index 77b803723..000000000
--- a/mdk-stage1/ppp/pppstats/pppstats.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- * print PPP statistics:
- * pppstats [-a|-d] [-v|-r|-z] [-c count] [-w wait] [interface]
- *
- * -a Show absolute values rather than deltas
- * -d Show data rate (kB/s) rather than bytes
- * -v Show more stats for VJ TCP header compression
- * -r Show compression ratio
- * -z Show compression statistics instead of default display
- *
- * History:
- * perkins@cps.msu.edu: Added compression statistics and alternate
- * display. 11/94
- * Brad Parker (brad@cayman.com) 6/92
- *
- * from the original "slstats" by Van Jacobson
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley. The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __STDC__
-#define const
-#endif
-
-#ifndef lint
-static const char rcsid[] = "$Id$";
-#endif
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/ioctl.h>
-
-#ifndef STREAMS
-#if defined(_linux_) && defined(__powerpc__) \
- && (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-/* kludge alert! */
-#undef __GLIBC__
-#endif
-#include <sys/socket.h> /* *BSD, Linux, NeXT, Ultrix etc. */
-#ifndef _linux_
-#include <net/if.h>
-#include <net/ppp_defs.h>
-#include <net/if_ppp.h>
-#else
-/* Linux */
-#if __GLIBC__ >= 2
-#include <asm/types.h> /* glibc 2 conflicts with linux/types.h */
-#include <net/if.h>
-#else
-#include <linux/types.h>
-#include <linux/if.h>
-#endif
-#include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
-#endif /* _linux_ */
-
-#else /* STREAMS */
-#include <sys/stropts.h> /* SVR4, Solaris 2, SunOS 4, OSF/1, etc. */
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-
-#endif /* STREAMS */
-
-int vflag, rflag, zflag; /* select type of display */
-int aflag; /* print absolute values, not deltas */
-int dflag; /* print data rates, not bytes */
-int interval, count;
-int infinite;
-int unit;
-int s; /* socket or /dev/ppp file descriptor */
-int signalled; /* set if alarm goes off "early" */
-char *progname;
-char *interface;
-
-#if defined(SUNOS4) || defined(ULTRIX) || defined(NeXT)
-extern int optind;
-extern char *optarg;
-#endif
-
-/*
- * If PPP_DRV_NAME is not defined, use the legacy "ppp" as the
- * device name.
- */
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME "ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
-static void usage __P((void));
-static void catchalarm __P((int));
-static void get_ppp_stats __P((struct ppp_stats *));
-static void get_ppp_cstats __P((struct ppp_comp_stats *));
-static void intpr __P((void));
-
-int main __P((int, char *argv[]));
-
-static void
-usage()
-{
- fprintf(stderr, "Usage: %s [-a|-d] [-v|-r|-z] [-c count] [-w wait] [interface]\n",
- progname);
- exit(1);
-}
-
-/*
- * Called if an interval expires before intpr has completed a loop.
- * Sets a flag to not wait for the alarm.
- */
-static void
-catchalarm(arg)
- int arg;
-{
- signalled = 1;
-}
-
-
-#ifndef STREAMS
-static void
-get_ppp_stats(curp)
- struct ppp_stats *curp;
-{
- struct ifpppstatsreq req;
-
- memset (&req, 0, sizeof (req));
-
-#ifdef _linux_
- req.stats_ptr = (caddr_t) &req.stats;
-#undef ifr_name
-#define ifr_name ifr__name
-#endif
-
- strncpy(req.ifr_name, interface, sizeof(req.ifr_name));
- if (ioctl(s, SIOCGPPPSTATS, &req) < 0) {
- fprintf(stderr, "%s: ", progname);
- if (errno == ENOTTY)
- fprintf(stderr, "kernel support missing\n");
- else
- perror("couldn't get PPP statistics");
- exit(1);
- }
- *curp = req.stats;
-}
-
-static void
-get_ppp_cstats(csp)
- struct ppp_comp_stats *csp;
-{
- struct ifpppcstatsreq creq;
-
- memset (&creq, 0, sizeof (creq));
-
-#ifdef _linux_
- creq.stats_ptr = (caddr_t) &creq.stats;
-#undef ifr_name
-#define ifr_name ifr__name
-#endif
-
- strncpy(creq.ifr_name, interface, sizeof(creq.ifr_name));
- if (ioctl(s, SIOCGPPPCSTATS, &creq) < 0) {
- fprintf(stderr, "%s: ", progname);
- if (errno == ENOTTY) {
- fprintf(stderr, "no kernel compression support\n");
- if (zflag)
- exit(1);
- rflag = 0;
- } else {
- perror("couldn't get PPP compression stats");
- exit(1);
- }
- }
-
-#ifdef _linux_
- if (creq.stats.c.bytes_out == 0) {
- creq.stats.c.bytes_out = creq.stats.c.comp_bytes + creq.stats.c.inc_bytes;
- creq.stats.c.in_count = creq.stats.c.unc_bytes;
- }
- if (creq.stats.c.bytes_out == 0)
- creq.stats.c.ratio = 0.0;
- else
- creq.stats.c.ratio = 256.0 * creq.stats.c.in_count /
- creq.stats.c.bytes_out;
-
- if (creq.stats.d.bytes_out == 0) {
- creq.stats.d.bytes_out = creq.stats.d.comp_bytes + creq.stats.d.inc_bytes;
- creq.stats.d.in_count = creq.stats.d.unc_bytes;
- }
- if (creq.stats.d.bytes_out == 0)
- creq.stats.d.ratio = 0.0;
- else
- creq.stats.d.ratio = 256.0 * creq.stats.d.in_count /
- creq.stats.d.bytes_out;
-#endif
-
- *csp = creq.stats;
-}
-
-#else /* STREAMS */
-
-int
-strioctl(fd, cmd, ptr, ilen, olen)
- int fd, cmd, ilen, olen;
- char *ptr;
-{
- struct strioctl str;
-
- str.ic_cmd = cmd;
- str.ic_timout = 0;
- str.ic_len = ilen;
- str.ic_dp = ptr;
- if (ioctl(fd, I_STR, &str) == -1)
- return -1;
- if (str.ic_len != olen)
- fprintf(stderr, "strioctl: expected %d bytes, got %d for cmd %x\n",
- olen, str.ic_len, cmd);
- return 0;
-}
-
-static void
-get_ppp_stats(curp)
- struct ppp_stats *curp;
-{
- if (strioctl(s, PPPIO_GETSTAT, curp, 0, sizeof(*curp)) < 0) {
- fprintf(stderr, "%s: ", progname);
- if (errno == EINVAL)
- fprintf(stderr, "kernel support missing\n");
- else
- perror("couldn't get PPP statistics");
- exit(1);
- }
-}
-
-static void
-get_ppp_cstats(csp)
- struct ppp_comp_stats *csp;
-{
- if (strioctl(s, PPPIO_GETCSTAT, csp, 0, sizeof(*csp)) < 0) {
- fprintf(stderr, "%s: ", progname);
- if (errno == ENOTTY) {
- fprintf(stderr, "no kernel compression support\n");
- if (zflag)
- exit(1);
- rflag = 0;
- } else {
- perror("couldn't get PPP compression statistics");
- exit(1);
- }
- }
-}
-
-#endif /* STREAMS */
-
-#define MAX0(a) ((int)(a) > 0? (a): 0)
-#define V(offset) MAX0(cur.offset - old.offset)
-#define W(offset) MAX0(ccs.offset - ocs.offset)
-
-#define RATIO(c, i, u) ((c) == 0? 1.0: (u) / ((double)(c) + (i)))
-#define CRATE(x) RATIO(W(x.comp_bytes), W(x.inc_bytes), W(x.unc_bytes))
-
-#define KBPS(n) ((n) / (interval * 1000.0))
-
-/*
- * Print a running summary of interface statistics.
- * Repeat display every interval seconds, showing statistics
- * collected over that interval. Assumes that interval is non-zero.
- * First line printed is cumulative.
- */
-static void
-intpr()
-{
- register int line = 0;
- sigset_t oldmask, mask;
- char *bunit;
- int ratef = 0;
- struct ppp_stats cur, old;
- struct ppp_comp_stats ccs, ocs;
-
- memset(&old, 0, sizeof(old));
- memset(&ocs, 0, sizeof(ocs));
-
- while (1) {
- get_ppp_stats(&cur);
- if (zflag || rflag)
- get_ppp_cstats(&ccs);
-
- (void)signal(SIGALRM, catchalarm);
- signalled = 0;
- (void)alarm(interval);
-
- if ((line % 20) == 0) {
- if (zflag) {
- printf("IN: COMPRESSED INCOMPRESSIBLE COMP | ");
- printf("OUT: COMPRESSED INCOMPRESSIBLE COMP\n");
- bunit = dflag? "KB/S": "BYTE";
- printf(" %s PACK %s PACK RATIO | ", bunit, bunit);
- printf(" %s PACK %s PACK RATIO", bunit, bunit);
- } else {
- printf("%8.8s %6.6s %6.6s",
- "IN", "PACK", "VJCOMP");
-
- if (!rflag)
- printf(" %6.6s %6.6s", "VJUNC", "VJERR");
- if (vflag)
- printf(" %6.6s %6.6s", "VJTOSS", "NON-VJ");
- if (rflag)
- printf(" %6.6s %6.6s", "RATIO", "UBYTE");
- printf(" | %8.8s %6.6s %6.6s",
- "OUT", "PACK", "VJCOMP");
-
- if (!rflag)
- printf(" %6.6s %6.6s", "VJUNC", "NON-VJ");
- if (vflag)
- printf(" %6.6s %6.6s", "VJSRCH", "VJMISS");
- if (rflag)
- printf(" %6.6s %6.6s", "RATIO", "UBYTE");
- }
- putchar('\n');
- }
-
- if (zflag) {
- if (ratef) {
- printf("%8.3f %6u %8.3f %6u %6.2f",
- KBPS(W(d.comp_bytes)),
- W(d.comp_packets),
- KBPS(W(d.inc_bytes)),
- W(d.inc_packets),
- ccs.d.ratio / 256.0);
- printf(" | %8.3f %6u %8.3f %6u %6.2f",
- KBPS(W(c.comp_bytes)),
- W(c.comp_packets),
- KBPS(W(c.inc_bytes)),
- W(c.inc_packets),
- ccs.c.ratio / 256.0);
- } else {
- printf("%8u %6u %8u %6u %6.2f",
- W(d.comp_bytes),
- W(d.comp_packets),
- W(d.inc_bytes),
- W(d.inc_packets),
- ccs.d.ratio / 256.0);
- printf(" | %8u %6u %8u %6u %6.2f",
- W(c.comp_bytes),
- W(c.comp_packets),
- W(c.inc_bytes),
- W(c.inc_packets),
- ccs.c.ratio / 256.0);
- }
-
- } else {
- if (ratef)
- printf("%8.3f", KBPS(V(p.ppp_ibytes)));
- else
- printf("%8u", V(p.ppp_ibytes));
- printf(" %6u %6u",
- V(p.ppp_ipackets),
- V(vj.vjs_compressedin));
- if (!rflag)
- printf(" %6u %6u",
- V(vj.vjs_uncompressedin),
- V(vj.vjs_errorin));
- if (vflag)
- printf(" %6u %6u",
- V(vj.vjs_tossed),
- V(p.ppp_ipackets) - V(vj.vjs_compressedin)
- - V(vj.vjs_uncompressedin) - V(vj.vjs_errorin));
- if (rflag) {
- printf(" %6.2f ", CRATE(d));
- if (ratef)
- printf("%6.2f", KBPS(W(d.unc_bytes)));
- else
- printf("%6u", W(d.unc_bytes));
- }
- if (ratef)
- printf(" | %8.3f", KBPS(V(p.ppp_obytes)));
- else
- printf(" | %8u", V(p.ppp_obytes));
- printf(" %6u %6u",
- V(p.ppp_opackets),
- V(vj.vjs_compressed));
- if (!rflag)
- printf(" %6u %6u",
- V(vj.vjs_packets) - V(vj.vjs_compressed),
- V(p.ppp_opackets) - V(vj.vjs_packets));
- if (vflag)
- printf(" %6u %6u",
- V(vj.vjs_searches),
- V(vj.vjs_misses));
- if (rflag) {
- printf(" %6.2f ", CRATE(c));
- if (ratef)
- printf("%6.2f", KBPS(W(c.unc_bytes)));
- else
- printf("%6u", W(c.unc_bytes));
- }
-
- }
-
- putchar('\n');
- fflush(stdout);
- line++;
-
- count--;
- if (!infinite && !count)
- break;
-
- sigemptyset(&mask);
- sigaddset(&mask, SIGALRM);
- sigprocmask(SIG_BLOCK, &mask, &oldmask);
- if (!signalled) {
- sigemptyset(&mask);
- sigsuspend(&mask);
- }
- sigprocmask(SIG_SETMASK, &oldmask, NULL);
- signalled = 0;
- (void)alarm(interval);
-
- if (!aflag) {
- old = cur;
- ocs = ccs;
- ratef = dflag;
- }
- }
-}
-
-int
-main(argc, argv)
- int argc;
- char *argv[];
-{
- int c;
-#ifdef STREAMS
- char *dev;
-#endif
-
- interface = PPP_DRV_NAME "0";
- if ((progname = strrchr(argv[0], '/')) == NULL)
- progname = argv[0];
- else
- ++progname;
-
- while ((c = getopt(argc, argv, "advrzc:w:")) != -1) {
- switch (c) {
- case 'a':
- ++aflag;
- break;
- case 'd':
- ++dflag;
- break;
- case 'v':
- ++vflag;
- break;
- case 'r':
- ++rflag;
- break;
- case 'z':
- ++zflag;
- break;
- case 'c':
- count = atoi(optarg);
- if (count <= 0)
- usage();
- break;
- case 'w':
- interval = atoi(optarg);
- if (interval <= 0)
- usage();
- break;
- default:
- usage();
- }
- }
- argc -= optind;
- argv += optind;
-
- if (!interval && count)
- interval = 5;
- if (interval && !count)
- infinite = 1;
- if (!interval && !count)
- count = 1;
- if (aflag)
- dflag = 0;
-
- if (argc > 1)
- usage();
- if (argc > 0)
- interface = argv[0];
-
- if (sscanf(interface, PPP_DRV_NAME "%d", &unit) != 1) {
- fprintf(stderr, "%s: invalid interface '%s' specified\n",
- progname, interface);
- }
-
-#ifndef STREAMS
- {
- struct ifreq ifr;
-
- s = socket(AF_INET, SOCK_DGRAM, 0);
- if (s < 0) {
- fprintf(stderr, "%s: ", progname);
- perror("couldn't create IP socket");
- exit(1);
- }
-
-#ifdef _linux_
-#undef ifr_name
-#define ifr_name ifr_ifrn.ifrn_name
-#endif
- strncpy(ifr.ifr_name, interface, sizeof(ifr.ifr_name));
- if (ioctl(s, SIOCGIFFLAGS, (caddr_t)&ifr) < 0) {
- fprintf(stderr, "%s: nonexistent interface '%s' specified\n",
- progname, interface);
- exit(1);
- }
- }
-
-#else /* STREAMS */
-#ifdef __osf__
- dev = "/dev/streams/ppp";
-#else
- dev = "/dev/" PPP_DRV_NAME;
-#endif
- if ((s = open(dev, O_RDONLY)) < 0) {
- fprintf(stderr, "%s: couldn't open ", progname);
- perror(dev);
- exit(1);
- }
- if (strioctl(s, PPPIO_ATTACH, &unit, sizeof(int), 0) < 0) {
- fprintf(stderr, "%s: ppp%d is not available\n", progname, unit);
- exit(1);
- }
-
-#endif /* STREAMS */
-
- intpr();
- exit(0);
-}
diff --git a/mdk-stage1/ppp/sample/auth-down b/mdk-stage1/ppp/sample/auth-down
deleted file mode 100644
index edde65db1..000000000
--- a/mdk-stage1/ppp/sample/auth-down
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# A program or script which is executed after the remote system
-# successfully authenticates itself. It is executed with the parameters
-# <interface-name> <peer-name> <user-name> <tty-device> <speed>
-#
-
-#
-# The environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-echo auth-down `date +'%y/%m/%d %T'` $* >> /var/log/pppstats
-
-# last line
diff --git a/mdk-stage1/ppp/sample/auth-up b/mdk-stage1/ppp/sample/auth-up
deleted file mode 100644
index 54722a3c0..000000000
--- a/mdk-stage1/ppp/sample/auth-up
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# A program or script which is executed after the remote system
-# successfully authenticates itself. It is executed with the parameters
-# <interface-name> <peer-name> <user-name> <tty-device> <speed>
-#
-
-#
-# The environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-echo auth-up `date +'%y/%m/%d %T'` $* >> /var/log/pppstats
-
-# last line
diff --git a/mdk-stage1/ppp/sample/ip-down b/mdk-stage1/ppp/sample/ip-down
deleted file mode 100644
index b771fb644..000000000
--- a/mdk-stage1/ppp/sample/ip-down
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-#
-# This script is run by the pppd _after_ the link is brought down.
-# It should be used to delete routes, unset IP addresses etc.
-#
-# This script is called with the following arguments:
-# Arg Name Example
-# $1 Interface name ppp0
-# $2 The tty ttyS1
-# $3 The link speed 38400
-# $4 Local IP number 12.34.56.78
-# $5 Peer IP number 12.34.56.99
-#
-
-#
-# The environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-# last line
diff --git a/mdk-stage1/ppp/sample/ip-up b/mdk-stage1/ppp/sample/ip-up
deleted file mode 100644
index 02bb71c44..000000000
--- a/mdk-stage1/ppp/sample/ip-up
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# This script is run by the pppd after the link is established.
-# It should be used to add routes, set IP address, run the mailq
-# etc.
-#
-# This script is called with the following arguments:
-# Arg Name Example
-# $1 Interface name ppp0
-# $2 The tty ttyS1
-# $3 The link speed 38400
-# $4 Local IP number 12.34.56.78
-# $5 Peer IP number 12.34.56.99
-#
-
-#
-# The environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-# last line
diff --git a/mdk-stage1/ppp/sample/options b/mdk-stage1/ppp/sample/options
deleted file mode 100644
index 8d0a3f963..000000000
--- a/mdk-stage1/ppp/sample/options
+++ /dev/null
@@ -1,153 +0,0 @@
-# /etc/ppp/options
-
-# The name of this server. Often, the FQDN is used here.
-#name <host>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-usehostname
-
-# If no local IP address is given, pppd will use the first IP address
-# that belongs to the local hostname. If "noipdefault" is given, this
-# is disabled and the peer will have to supply an IP address.
-noipdefault
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-#ms-dns 192.168.1.1
-#ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-#wins-addr 192.168.1.50
-#wins-addr 192.168.1.51
-
-# enable this on a server that already has a permanent default route
-#nodefaultroute
-
-# Run the executable or shell command specified after pppd has terminated
-# the link. This script could, for example, issue commands to the modem
-# to cause it to hang up if hardware modem control signals were not
-# available.
-# If mgetty is running, it will reset the modem anyway. So there is no need
-# to do it here.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# Increase debugging level (same as -d). The debug output is written
-# to syslog LOG_LOCAL2.
-debug
-
-# Enable debugging code in the kernel-level PPP driver. The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# authentication can either be pap or chap. As most people only want to
-# use pap, you can also disable chap:
-#require-pap
-#refuse-chap
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Use the modem control lines.
-modem
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it. 0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-# To allow pppd to work over a rlogin/telnet connection, ou should escape
-# XON (^Q), XOFF (^S) and ^]: (The peer should use "escape ff".)
-#asyncmap 200a0000
-asyncmap 0
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map). The characters to be escaped are
-# specified as a list of hex numbers separated by commas. Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified. The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128. The default MRU value is 1500. A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-nodetach
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system. {proxyarp,noproxyarp}
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-#login
-
-# If this option is given, pppd will send an LCP echo-request frame to
-# the peer every n seconds. Under Linux, the echo-request is sent when
-# no packets have been received from the peer for n seconds. Normally
-# the peer should respond to the echo-request by sending an echo-reply.
-# This option can be used with the lcp-echo-failure option to detect
-# that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection. Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Specifies that pppd should disconnect if the link is idle for n seconds.
-idle 600
-
-# Disable the IPXCP and IPX protocols.
-noipx
-
-# ---<End of File>---
diff --git a/mdk-stage1/ppp/sample/options.ttyXX b/mdk-stage1/ppp/sample/options.ttyXX
deleted file mode 100644
index d4202f534..000000000
--- a/mdk-stage1/ppp/sample/options.ttyXX
+++ /dev/null
@@ -1,14 +0,0 @@
-# If you need to set up multiple serial lines then copy this file to
-# options.<ttyname> for each tty with a modem on it.
-#
-# The options.tty file will assign an IP address to each PPP connection
-# as it comes up. They must all be distinct!
-#
-# Example:
-# options.ttyS1 for com2 under DOS.
-#
-# Edit the following line so that the first IP address
-# mentioned is the ip address of the serial port while the second
-# is the IP address of your host
-#
-hostname-s1:hostname
diff --git a/mdk-stage1/ppp/sample/pap-secrets b/mdk-stage1/ppp/sample/pap-secrets
deleted file mode 100644
index 098971b9f..000000000
--- a/mdk-stage1/ppp/sample/pap-secrets
+++ /dev/null
@@ -1,28 +0,0 @@
-# Secrets for authentication using PAP
-# client server secret IP addresses
-
-# OUTBOUND CONNECTIONS
-# Here you should add your userid password to connect to your providers via
-# pap. The * means that the password is to be used for ANY host you connect
-# to. Thus you do not have to worry about the foreign machine name. Just
-# replace password with your password.
-# If you have different providers with different passwords then you better
-# remove the following line.
-#hostname * password
-
-# INBOUND CONNECTIONS
-#client hostname <password> 192.168.1.1
-
-# If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config,
-# all users in /etc/passwd can use their password for pap-authentication.
-#
-# Every regular user can use PPP and has to use passwords from /etc/passwd
-#* hostname ""
-# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any
-# other accounts that should not be able to use pppd! Replace hostname
-# with your local hostname.
-#guest hostname "*" -
-#master hostname "*" -
-#root hostname "*" -
-#support hostname "*" -
-#stats hostname "*" -
diff --git a/mdk-stage1/ppp/scripts/README b/mdk-stage1/ppp/scripts/README
deleted file mode 100644
index 00e032ca6..000000000
--- a/mdk-stage1/ppp/scripts/README
+++ /dev/null
@@ -1,143 +0,0 @@
-This directory contains a set of scripts which have been used on Linux
-as well as Solaris 2.x systems to initiate or maintain a connection
-with PPP. The files in this directory were contributed by Al Longyear
-(longyear@netcom.com) and Adi Masputra (adi.masputra@sun.com)
-
-------------------------------------------------------------------------
-
-1. README
-
-This file. You are reading it. It is just documentation.
-
-------------------------------------------------------------------------
-
-2. ppp-on
-
-This script will initiate a connection to the PPP system. It will run
-the chat program with the connection script as a parameter. This is a
-possible security hole. However, it is simple. It is meant to replace
-the previous version of ppp-on which was not very functional.
-
-The ppp-on script has entries for the account name, password, IP
-addresses, and telephone numbers. The parameters are passed to the
-pppd process and, then in turn, to the second part of the connect
-script, as a set of environment variables.
-
-Please make sure that you put the full path name to the ppp-on-dialer
-script in the reference to it in ppp-on.
-
-------------------------------------------------------------------------
-
-3. ppp-on-dialer
-
-This is the second part to the simple calling script, ppp-on. It
-executes the chat program to connect the user with a standard UNIX
-style getty/login connection sequence.
-
-------------------------------------------------------------------------
-
-4. callback
-
-This script may be used in lieu of the ppp-on-dialer to permit the
-common modem callback sequence. You may need to make changes to the
-expected prompt string for the modem.
-
-The script works by disabling the system's detection of the DCD
-condition and working on the modem status message "NO CARRIER" which
-is generated when the modem disconnects.
-
-It is crude. It does work for my modem connection. Use as you see fit.
-
-------------------------------------------------------------------------
-
-5. redialer
-
-The redialer script is a replacement for the ppp-on-dialer script. It
-will do 'attack dialing' or 'demon dialing' of one or more telephone
-numbers. The first number which responds will be used for a
-connection.
-
-There is a limit of ten attempts and a 15 second delay between dialing
-attempts. Both values are set in the script.
-
-------------------------------------------------------------------------
-
-6. ppp-off
-
-This is a script which will terminate the active ppp connection. Use
-as either "ppp-off" to terminate ppp0, or "ppp-off <device>" to
-terminate the connection on <device>. For example, "ppp-off ppp2" will
-terminate the ppp2 connection.
-
-------------------------------------------------------------------------
-
-7. secure-card
-
-This script was written by Jim Isaacson <jcisaac@crl.com>. It is a script
-for the 'expect' programming language used with Tcl. You need to have
-expect and Tcl installed before this script may be used.
-
-This script will operate with a device marketed under the name "SecureCARD".
-This little device is mated with its controller. On the credit card size
-device, there is a sequence number which changes on a random basis. In order
-for you to connect you need to enter a fixed portion of your account name
-and the number which is displayed on this card device. The number must match
-the value at the controller in order for the account name to be used.
-
-The problem is that chat uses fixed response strings. In addition, the
-timing for running the script may prevent the use of a script that reads the
-value before it starts the dial sequence. What was needed was a script which
-asked the user at the user's console at the time that it is needed.
-
-This led to the use of expect.
-
-------------------------------------------------------------------------
-
-8. ppp-on-rsh
-
-This script will initiate a PPP connection to a remote machine using rsh.
-This is implemented by creating a master/slave pseudo-tty with the slave
-pointing to rsh, specifically with the 'pty' and 'notty' options of pppd.
-It is assumed that the remote machine contains some sort of trust
-mechanisms (such as ~/.rhosts, et al) to allow the local machine to
-connect via rsh as root.
-
-------------------------------------------------------------------------
-
-9. ppp-on-ssh
-
-This script will initiate a PPP connection to a remote machine using the
-secure shell, or ssh. I've only tested this on ssh 1.x, so those of you
-who are running ssh 2.x mahy need to modify the ssh options slightly.
-This is implemented by creating a master/slave pseudo-ttyt with the slave
-pointing to ssh, specifically with the 'pty' and 'notty' options of pppd.
-It is assumed that the remote machine can accept the ssh connection from
-the local host, in the sense that all ssh authentication mechanisms have
-been properly configured, so that a remote root user can open a ssh
-connection.
-
-------------------------------------------------------------------------
-
-10. options-rsh-loc & options-rsh-rem
-
-These options files accompany the ppp-on-rsh script mentioned above. In
-theory, you'd want to copy the options-rsh-rem to the remote machine where
-in.rshd is running. The only extra option required on the remote machine
-options file is the 'notty' option. In addition, all ASCII control characters
-[0x00 to 0x1f], plus 0xff, are escaped. This may need to be modified
-depending on the rsh (or pseudo-tty) implementation which may differ across
-platforms, for further optimizations.
-
-------------------------------------------------------------------------
-
-11. options-ssh-loc & options-ssh-rem
-
-These options files accompany the ppp-on-ssh script mentioned above. I've
-only tested this on ssh 1.x, so those of you who are running ssh 2.x need
-to modify the ssh options slightly. In theory, you'd want to copy the
-options-ssh-rem to the remote machine where sshd daemon is running. The only
-extra options required on the remote machine options file is the 'notty'
-option. In addition, all ASCII control characters [0x00 to 0x1f], plus 0xff,
-are escaped. This may need to be modified depending on the ssh (or
-pseudo-tty) implementation which may differ across platforms, for further
-optimizations.
diff --git a/mdk-stage1/ppp/scripts/callback b/mdk-stage1/ppp/scripts/callback
deleted file mode 100755
index 3e74e10b2..000000000
--- a/mdk-stage1/ppp/scripts/callback
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-###################################################################
-#
-# Script to dial the remote system, negotiate the connection, and send
-# it the id. Then wait for the modem to disconnect. Reset the modem
-# to answer mode and wait for the system to call back.
-#
-# The telephone number and modempass are used when establishing the
-# connection to the modem.
-#
-PHONE=555-1212
-MODEMPASS=modem_identifier
-#
-# Once the modem calls back, the account name and password are used for
-# a UNIX style login operation.
-#
-ACCOUNT=my_account_name
-PASSWORD=my_password
-
-###################################################################
-#
-# Step 1. Dial the modem and negotiate the initial dialog.
-# note: the modem is configured to ignore loss of DCD at this point.
-# it is important that this be performed because the loss of DCD
-# will normally prevent system from working since 'modem' is used
-# for pppd.
-#
-# The script is terminated normally when the carrier is lost.
-#
-chat -v \
- TIMEOUT 3 \
- ABORT '\nBUSY\r' \
- ABORT '\nNO ANSWER\r' \
- ABORT '\nRINGING\r\n\r\nRINGING\r' \
- '' AT \
- 'OK-+++\c-OK' 'AT&C0&D2S0=0H0 \
- TIMEOUT 30 \
- OK ATDT$TELEPHONE \
- CONNECT '' \
- assword: $MODEMPASS \
- "\nNO CARRIER\r"
-
-if [ "$?" = "0" ]; then
-
-###################################################################
-#
-# Step 2. Wait for the call back from the remote. This will wait for at most
-# 30 seconds for the call back should the first attempt fail or
-# something happen with the callback logic at the remote.
-#
-# note: when the callback occurs, the DCD setting is re-enabled.
-#
-# If some voice call should happen during this period, the system will
-# answer the telephone and then hang up on them. I realize that this is
-# rude, but there is little that this script can do.
-#
- chat -v \
- TIMEOUT 30 \
- ABORT '\nVOICE\r' \
- '\nRING\r' 'AT&C1A' \
- CONNECT '' \
- TIMEOUT 10 \
- ogin:--ogin: $ACCOUNT \
- TIMEOUT 45 \
- assword: $PASSWORD
-
- if [ "$?" = "0" ]; then
- exit 0
- fi
-fi
-
-###################################################################
-#
-# The script has failed. Terminate the connection mode.
-#
-chat -v TIMEOUT 3 "" AT 'OK-+++\c-OK' 'AT&C1&D2S0=0H0' OK
-exit 1
diff --git a/mdk-stage1/ppp/scripts/chat-callback b/mdk-stage1/ppp/scripts/chat-callback
deleted file mode 100644
index d014d6af3..000000000
--- a/mdk-stage1/ppp/scripts/chat-callback
+++ /dev/null
@@ -1,98 +0,0 @@
-# =====================================================================================
-# Chat script to dial our Company PPP account.
-# They uses a call-back system to identify us and to reverse
-# charge the call cost.
-# =====================================================================================
-#
-ECHO OFF
-# All the usual abort strings
-ABORT "NO CARRIER"
-ABORT "VOICE"
-ABORT "BUSY"
-ABORT "NO DIALTONE"
-ABORT "NO ANSWER"
-#
-# If calling outside allowed time we get this:
-#
-ABORT "Access denied"
-#
-# Modem initialisation stuff
-#
-TIMEOUT 5
-SAY "Initialising modem ...\n"
-'' ATE1
-'OK\r\n' ATS0=1S11=60X4&K4S42.1=1
-#
-# Now dial our ISP and wait for connection
-#
-SAY "Dialling our ISP ...\n"
-'OK\r\n' ATDT09834657
-TIMEOUT 60
-CONNECT \c
-SAY "Connected ...\n"
-#
-# This is the first stage login, we identify ourself so that the remote
-# system will agree to call us back.
-#
-TIMEOUT 30
-SAY "Sending Callback login ID ...\n"
-name:-BREAK-name: callme
-#
-# From now on, we must assume no carrier is normal as well
-# as receiving a HANGUP signal because it will be the
-# case if our ISP clears the call to call us back.
-#
-CLR_ABORT "NO CARRIER"
-HANGUP OFF
-#
-ABORT "Invalid"
-#
-# Now send password and wait to see what happens
-#
-SAY "Sending Callback password ...\n"
-word:--word: xvsgsgs
-"You will be" \c
-#
-# What can happen now is:
-# either: we get "You will be called back..." which is the successful case
-# or: we get "Invalid login" and we abort (bad login ID or password)
-# or: we get "NO CARRIER" because of an error, this will not abort
-# and we will time out after 30 seconds
-# or: we get nothing and we will time out after 30 seconds
-#
-#
-# We reach here if we got "You will be called back..."
-#
-CLR_ABORT "Invalid"
-SAY "Now waiting for Call back ...\n"
-#
-# The remote system will now hangup and we will get both "NO CARRIER"
-# and a hangup signal which are ignored. We now wait for a connection
-# for up to 120 seconds. What happens here if somebody else calls before
-# the remote system is a bit dangerous:
-#
-# If a malicious user connects and says 'name:', he will see 'PPPuser'
-# If he then says 'word:' he will see the passowrd 'blipblop'. I may not
-# know to which systems these belong to, though. It is up to you to consider
-# that case and decide wether the risk is too big or not ....
-#
-TIMEOUT 120
-"CONNECT" \c
-#
-# We have been called, re-arm ABORT on NO CARRIER and normal hangup signal
-# behaviour
-#
-HANGUP ON
-ABORT "NO CARRIER"
-#
-# Second stage login in order to start PPP
-#
-SAY "Remote system called back, logging in ...\n"
-SAY "Sending login ID ...\n"
-name:-BREAK-name: PPPuser
-SAY "Sending password ...\n"
-word:--word: blipblop
-SAY "Asking to start PPP ...\n"
-'CnetSrv' "ppp default"
-"Entering PPP mode" \c
-SAY "ISP PPP started ...\n"
diff --git a/mdk-stage1/ppp/scripts/chatchat/README b/mdk-stage1/ppp/scripts/chatchat/README
deleted file mode 100644
index 88a4c6939..000000000
--- a/mdk-stage1/ppp/scripts/chatchat/README
+++ /dev/null
@@ -1,134 +0,0 @@
-v 0.1 gpk@onramp.net 3/27/99
-
-I Intro
-
- This document covers the use of the modified "chat" program and its
-adjunct "chatchat" to login using the Security Dynamics SecurID card
-on a linux system.
-
- This set of files comprises a modified version of the chat program
-(the one distributed with ppp-2.3.5) and a new program called chatchat
-that allows you to supply data from the keyboard to the chat program.
-
- The SecurID card generates passwords that have a lifetime of one
-minute and are used as a first layer in dial up security. The only
-software I know of for this card is for windows, so I wrote my own.
-This software allows you to type in the time-sensitive password right
-when your chat script is asked to supply the passcode by the remote
-system.
-
-
-II How It Works
-
- This version of chat his an additional command that can be put into
-its options that says "Don't reply with this string. Open this pipe,
-read the contents, and reply with that instead." Chatchat creates a
-pipe and lets you type your passcode into it, then chat picks that up
-and sends it out just as though the passcode was hardcoded into the
-options.
-
-
-III Installation
-
- I've provided intel binaries and source code the the modified chat
-program and the chatchat program. I'll recommend that you copy the
-chat.c program into your ppp-2.3.5/chat directory (save your original
-chat.c program first!) and re-make it using the Makefile that comes
-with chat. Copy the new chat somewhere into your path. (On my system
-chat lives in /usr/sbin/chat, so I've copied the modified one into
-/usr/sbin/chat.new and changed my dial in script to call chat.new
-instead of chat.
-
- Second, compile chatchat.c and install it somewhere in your path:
-
- gcc -g -o chatchat chatchat.c
- cp chatchat /usr/sbin
-
- Third, modify your chat script to use the chatchat program. Mine
-looks something like this:
-
-
- --------------------
-
-#!/bin/sh
-#
-# This is part 2 of the ppp-on script. It will perform the connection
-# protocol for the desired connection.
-# use atm0 to turn down the speaker volume on my sportster x2 voice modem
-# gpk 11/2/97
-
-exec /usr/sbin/chat.new -V -v \
- ABORT "BUSY" \
- ABORT "NO DIAL TONE" \
- ABORT "NO ANSWER" \
- TIMEOUT 50 \
- "" "atm0" \
- OK ATDT$TELEPHONE \
- CONNECT '' \
- name: \\da0xxxxxx \
- word: @/var/tmp/p \
- compress. ''
-
-
- -----------------------
-
- This is a standard chat script:
-
-* abort if the modem is busy, you don't get a dial tone, no one
- answers, or 50 seconds elapses.
-
-* use atm0 to mute the modem
-
-* dial the modem, when it connects, wait to be asked for account name
-
-* when we see "name:" prompt, delay briefly then respond with your
- account name (fill in your account name)
-
-Now we get to the new stuff:
-
-* when we see "word:" in the password prompt, instead of responding
- with "@/var/tmp/p", the modified chat program will open the pipe
- /var/tmp/p, read the passcode out of there, and send it
-
-* when we see "compress." (the last word before ppp starts), reply
- with nothing. The script ends and we start ppp.
-
-Note:
-
-* Make sure there is some whitespace between the filename and the \.
-
-
-IV Usage
-
- To use this install the modified chat and chatchat programs, and
-modify your chat script similar to the above. Before you dial in,
-start that chatchat program giving it the same pipe as in your config
-file. In the above case:
-
-chatchat /var/tmp/p
-
- Wait until you have one or two tick marks left on your card's
-current number, then start your dial up process that eventually calls
-chat. When chat goes to open and read the pipe, chatchat will prompt:
-
-
-type PIN into SecurID card and
- enter resulting passcode:
-
- At that point, type your PIN number into your Securid card, press
-the diamond, and type the resulting numbers in as your passcode. If
-you've left the -V -v options on your chat command you'll see
-everything so out, otherwise it works silently.
-
- If you type the number wrong or run out of time, the server will
-respond with an authentication failure. In that case you will have to
-hang up and start again. I don't know how to build a conditional script
-that says either expect "compress" next, but if you see "name:" again,
-do this instead.
-
-
-V Additional Information
-
- You can obtain additional information about chat and ppp from the
-man pages for chat and pppd, as well as the PPP-HOWTO.
-
diff --git a/mdk-stage1/ppp/scripts/chatchat/chatchat.c b/mdk-stage1/ppp/scripts/chatchat/chatchat.c
deleted file mode 100644
index 4534fb9e3..000000000
--- a/mdk-stage1/ppp/scripts/chatchat/chatchat.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/* *************************************************************************
-* NAME: chatchat.c
-*
-* DESCRIPTION:
-*
-* This program creates a pipe for the chat process to read. The user
-* can supply information (like a password) that will be picked up
-* by chat and sent just like the regular contents of a chat script.
-*
-* Usage is:
-*
-* chatchat <filename>
-*
-* where <filename> matches the option given in the chat script.
-*
-* for instance the chat script fragment:
-*
-* ...
-* name: \\dmyname \
-* word: @/var/tmp/p \
-* ...
-* ^
-* (note: leave some whitespace after the filename)
-*
-* expect "name:", reply with a delay followed by "myname"
-* expect "word:", reply with the data read from the pipe /var/tmp/p
-*
-* the matching usage of chatchat would be:
-*
-* chatchat /var/tmp/p
-*
-* eg:
-*
-* $chatchat /var/tmp/p
-* ...
-* some other process eventually starts:
-* chat ...
-* chat parses the "@/var/tmp/p" option and opens
-* /var/tmp/p
-* (chatchat prompts:)
-*
-* type PIN into SecurID card
-* enter resulting passcode: [user inputs something]
-*
-* chat reads /var/tmp/p & gets what the
-* user typed at chatchat's "enter string" prompt
-* chat removes the pipe file
-* chat sends the user's input as a response in
-* place of "@/var/tmp/p"
-*
-* PROCESS:
-*
-* gcc -g -o chatchat chatchat.c
-*
-*
-* GLOBALS: none
-*
-* REFERENCES:
-*
-* see the man pages and documentation that come with the 'chat' program
-* (part of the ppp package). you will need to use the modified chat
-* program that accepts the '@' operator.
-*
-* LIMITATIONS:
-*
-* REVISION HISTORY:
-*
-* STR Description Author
-*
-* 23-Mar-99 initial coding gpk
-* 12-May-99 unlink the pipe after closing paulus
-*
-* TARGET: ANSI C
-* This program is in the public domain.
-*
-*
-* ************************************************************************* */
-
-
-
-
-#include <sys/time.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-
-/* MAXINPUT - the data typed into chatchat must be fewer */
-/* characters than this. */
-
-#define MAXINPUT 80
-
-
-
-
-
-
-/* *************************************************************************
-
-
- NAME: main
-
-
- USAGE:
-
- int argc;
- char * argv[];
-
- main(argc, argv[]);
-
- returns: int
-
- DESCRIPTION:
- if the pipe file name is given on the command line,
- create the pipe, prompt the user and put whatever
- is typed into the pipe.
-
- returns -1 on error
- else # characters entered
- REFERENCES:
-
- LIMITATIONS:
-
- GLOBAL VARIABLES:
-
- accessed: none
-
- modified: none
-
- FUNCTIONS CALLED:
-
- REVISION HISTORY:
-
- STR Description of Revision Author
-
- 25-Mar-99 initial coding gpk
-
- ************************************************************************* */
-
-int main(int argc, char * argv[])
-{
- int retval;
-
- int create_and_write_pipe(char * pipename);
-
- if (argc != 2)
- {
- fprintf(stderr, "usage: %s pipename\n", argv[0]);
- retval = -1;
- }
- else
- {
- retval = create_and_write_pipe(argv[1]);
- }
- return (retval);
-}
-
-
-
-
-/* *************************************************************************
-
-
- NAME: create_and_write_pipe
-
-
- USAGE:
-
- int some_int;
- char * pipename;
-
- some_int = create_and_write_pipe(pipename);
-
- returns: int
-
- DESCRIPTION:
- given the pipename, create the pipe, open it,
- prompt the user for a string to put into the
- pipe, write the string, and close the pipe
-
- on error, print out an error message and return -1
-
- returns -1 on error
- else #bytes written into the pipe
- REFERENCES:
-
- LIMITATIONS:
-
- GLOBAL VARIABLES:
-
- accessed: none
-
- modified: none
-
- FUNCTIONS CALLED:
-
- REVISION HISTORY:
-
- STR Description of Revision Author
-
- 25-Mar-99 initial coding gpk
- 12-May-99 remove pipe after closing paulus
-
- ************************************************************************* */
-
-int create_and_write_pipe(char * pipename)
-{
- int retval, created, pipefd, nread, nwritten;
- char input[MAXINPUT];
- char errstring[180];
-
- int create_pipe(char * pipename);
- int write_to_pipe(int pipefd, char * input, int nchar);
-
- created = create_pipe(pipename);
-
- if (-1 == created)
- {
- sprintf(errstring, "unable to create pipe '%s'", pipename);
- perror(errstring);
- retval = -1;
- }
- else
- {
-
- /* note: this open won't succeed until chat has the pipe */
- /* open and ready to read. this makes for nice timing. */
-
- pipefd = open(pipename, O_WRONLY);
-
- if (-1 == pipefd)
- {
- sprintf(errstring, "unable to open pipe '%s'", pipename);
- perror(errstring);
- retval = -1;
- }
- else
- {
- fprintf(stderr, "%s \n %s",
- "type PIN into SecurID card and",
- "enter resulting passcode:");
- nread = read(STDIN_FILENO, (void *)input, MAXINPUT);
-
-
- if (0 >= nread)
- {
- perror("unable to read from stdin");
- retval = -1;
- }
- else
- {
- /* munch off the newline character, chat supplies */
- /* a return when it sends the string out. */
- input[nread -1] = 0;
- nread--;
- nwritten = write_to_pipe(pipefd, input, nread);
- /* printf("wrote [%d]: '%s'\n", nwritten, input); */
- retval = nwritten;
- }
- close(pipefd);
-
- /* Now make the pipe go away. It won't actually go away
- completely until chat closes it. */
- if (unlink(pipename) < 0)
- perror("Warning: couldn't remove pipe");
- }
- }
- return(retval);
-}
-
-
-
-
-
-
-
-/* *************************************************************************
-
-
- NAME: create_pipe
-
-
- USAGE:
-
- int some_int;
- char * pipename;
-
- some_int = create_pipe(pipename);
-
- returns: int
-
- DESCRIPTION:
- create a pipe of the given name
-
- if there is an error (like the pipe already exists)
- print an error message and return
-
- return -1 on failure else success
-
- REFERENCES:
-
- LIMITATIONS:
-
- GLOBAL VARIABLES:
-
- accessed: none
-
- modified: none
-
- FUNCTIONS CALLED:
-
- REVISION HISTORY:
-
- STR Description of Revision Author
-
- 25-Mar-99 initial coding gpk
-
- ************************************************************************* */
-
-int create_pipe(char * pipename)
-{
- mode_t old_umask;
- int created;
-
- /* hijack the umask temporarily to get the mode I want */
- /* on the pipe. */
-
- old_umask = umask(000);
-
- created = mknod(pipename, S_IFIFO | S_IRWXU | S_IWGRP | S_IWOTH,
- (dev_t)NULL);
-
- /* now restore umask. */
-
- (void)umask(old_umask);
-
- if (-1 == created)
- {
- perror("unable to create pipe");
- }
-
- return(created);
-}
-
-
-
-
-
-
-/* *************************************************************************
-
-
- NAME: write_to_pipe
-
-
- USAGE:
-
- int some_int;
- int pipefd;
- char * input;
- int nchar;
-
- some_int = write_to_pipe(pipefd, input, nchar);
-
- returns: int
-
- DESCRIPTION:
- write nchars of data from input to pipefd
-
- on error print a message to stderr
-
- return -1 on error, else # bytes written
- REFERENCES:
-
- LIMITATIONS:
-
- GLOBAL VARIABLES:
-
- accessed: none
-
- modified: none
-
- FUNCTIONS CALLED:
-
- REVISION HISTORY:
-
- STR Description of Revision Author
-
- 25-Mar-99 initial coding gpk
- 12-May-99 don't write count word first paulus
-
- ************************************************************************* */
-
-int write_to_pipe(int pipefd, char * input, int nchar)
-{
- int nwritten;
-
- /* nwritten = write(pipefd, (void *)&nchar, sizeof(nchar)); */
- nwritten = write(pipefd, (void *)input, nchar);
-
- if (-1 == nwritten)
- {
- perror("unable to write to pipe");
- }
-
- return(nwritten);
-}
diff --git a/mdk-stage1/ppp/scripts/ip-down.local.add b/mdk-stage1/ppp/scripts/ip-down.local.add
deleted file mode 100644
index b93590e49..000000000
--- a/mdk-stage1/ppp/scripts/ip-down.local.add
+++ /dev/null
@@ -1,20 +0,0 @@
-
-#
-# This sample code shows you one way to modify your setup to allow automatic
-# configuration of your resolv.conf for peer supplied DNS addresses when using
-# the `usepeerdns' option.
-#
-# In my case I just added this to my /etc/ppp/ip-down.local script. You may need to
-# create an executable script if one does not exist.
-#
-# Nick Walker (nickwalker@email.com)
-#
-
-if [ -n "$USEPEERDNS" -a -f /etc/ppp/resolv.conf ]; then
- if [ -f /etc/ppp/resolv.prev ]; then
- cp -f /etc/ppp/resolv.prev /etc/resolv.conf
- else
- rm -f /etc/resolv.conf
- fi
-fi
-
diff --git a/mdk-stage1/ppp/scripts/ip-up.local.add b/mdk-stage1/ppp/scripts/ip-up.local.add
deleted file mode 100644
index 80172093a..000000000
--- a/mdk-stage1/ppp/scripts/ip-up.local.add
+++ /dev/null
@@ -1,24 +0,0 @@
-
-#
-# This sample code shows you one way to modify your setup to allow automatic
-# configuration of your resolv.conf for peer supplied DNS addresses when using
-# the `usepeerdns' option.
-#
-# In my case I just added this to my /etc/ppp/ip-up.local script. You may need to
-# create an executable script if one does not exist.
-#
-# Nick Walker (nickwalker@email.com)
-#
-
-if [ -n "$USEPEERDNS" -a -f /etc/ppp/resolv.conf ]; then
- rm -f /etc/ppp/resolv.prev
- if [ -f /etc/resolv.conf ]; then
- cp /etc/resolv.conf /etc/ppp/resolv.prev
- grep domain /etc/ppp/resolv.prev > /etc/resolv.conf
- grep search /etc/ppp/resolv.prev >> /etc/resolv.conf
- cat /etc/ppp/resolv.conf >> /etc/resolv.conf
- else
- cp /etc/ppp/resolv.conf /etc
- fi
-fi
-
diff --git a/mdk-stage1/ppp/scripts/options-rsh-loc b/mdk-stage1/ppp/scripts/options-rsh-loc
deleted file mode 100644
index b015b87fe..000000000
--- a/mdk-stage1/ppp/scripts/options-rsh-loc
+++ /dev/null
@@ -1 +0,0 @@
-debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1460
diff --git a/mdk-stage1/ppp/scripts/options-rsh-rem b/mdk-stage1/ppp/scripts/options-rsh-rem
deleted file mode 100644
index 4b10bb9e9..000000000
--- a/mdk-stage1/ppp/scripts/options-rsh-rem
+++ /dev/null
@@ -1 +0,0 @@
-notty debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1460
diff --git a/mdk-stage1/ppp/scripts/options-ssh-loc b/mdk-stage1/ppp/scripts/options-ssh-loc
deleted file mode 100644
index add03d659..000000000
--- a/mdk-stage1/ppp/scripts/options-ssh-loc
+++ /dev/null
@@ -1 +0,0 @@
-debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1400
diff --git a/mdk-stage1/ppp/scripts/options-ssh-rem b/mdk-stage1/ppp/scripts/options-ssh-rem
deleted file mode 100644
index d690722c6..000000000
--- a/mdk-stage1/ppp/scripts/options-ssh-rem
+++ /dev/null
@@ -1 +0,0 @@
-notty debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1400
diff --git a/mdk-stage1/ppp/scripts/ppp-off b/mdk-stage1/ppp/scripts/ppp-off
deleted file mode 100755
index a22b5ea3d..000000000
--- a/mdk-stage1/ppp/scripts/ppp-off
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-######################################################################
-#
-# Determine the device to be terminated.
-#
-if [ "$1" = "" ]; then
- DEVICE=ppp0
-else
- DEVICE=$1
-fi
-
-######################################################################
-#
-# If the ppp0 pid file is present then the program is running. Stop it.
-if [ -r /var/run/$DEVICE.pid ]; then
- kill -INT `cat /var/run/$DEVICE.pid`
-#
-# If the kill did not work then there is no process running for this
-# pid. It may also mean that the lock file will be left. You may wish
-# to delete the lock file at the same time.
- if [ ! "$?" = "0" ]; then
- rm -f /var/run/$DEVICE.pid
- echo "ERROR: Removed stale pid file"
- exit 1
- fi
-#
-# Success. Let pppd clean up its own junk.
- echo "PPP link to $DEVICE terminated."
- exit 0
-fi
-#
-# The ppp process is not running for ppp0
-echo "ERROR: PPP link is not active on $DEVICE"
-exit 1
diff --git a/mdk-stage1/ppp/scripts/ppp-on b/mdk-stage1/ppp/scripts/ppp-on
deleted file mode 100755
index ab79db471..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-#
-# Script to initiate a ppp connection. This is the first part of the
-# pair of scripts. This is not a secure pair of scripts as the codes
-# are visible with the 'ps' command. However, it is simple.
-#
-# These are the parameters. Change as needed.
-TELEPHONE=555-1212 # The telephone number for the connection
-ACCOUNT=george # The account name for logon (as in 'George Burns')
-PASSWORD=gracie # The password for this account (and 'Gracie Allen')
-LOCAL_IP=0.0.0.0 # Local IP address if known. Dynamic = 0.0.0.0
-REMOTE_IP=0.0.0.0 # Remote IP address if desired. Normally 0.0.0.0
-NETMASK=255.255.255.0 # The proper netmask if needed
-#
-# Export them so that they will be available at 'ppp-on-dialer' time.
-export TELEPHONE ACCOUNT PASSWORD
-#
-# This is the location of the script which dials the phone and logs
-# in. Please use the absolute file name as the $PATH variable is not
-# used on the connect option. (To do so on a 'root' account would be
-# a security hole so don't ask.)
-#
-DIALER_SCRIPT=/etc/ppp/ppp-on-dialer
-#
-# Initiate the connection
-#
-# I put most of the common options on this command. Please, don't
-# forget the 'lock' option or some programs such as mgetty will not
-# work. The asyncmap and escape will permit the PPP link to work with
-# a telnet or rlogin connection. You are welcome to make any changes
-# as desired. Don't use the 'defaultroute' option if you currently
-# have a default route to an ethernet gateway.
-#
-exec /usr/sbin/pppd debug lock modem crtscts /dev/ttyS0 38400 \
- asyncmap 20A0000 escape FF kdebug 0 $LOCAL_IP:$REMOTE_IP \
- noipdefault netmask $NETMASK defaultroute connect $DIALER_SCRIPT
diff --git a/mdk-stage1/ppp/scripts/ppp-on-dialer b/mdk-stage1/ppp/scripts/ppp-on-dialer
deleted file mode 100755
index 7d66765f1..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on-dialer
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# This is part 2 of the ppp-on script. It will perform the connection
-# protocol for the desired connection.
-#
-exec chat -v \
- TIMEOUT 3 \
- ABORT '\nBUSY\r' \
- ABORT '\nNO ANSWER\r' \
- ABORT '\nRINGING\r\n\r\nRINGING\r' \
- '' \rAT \
- 'OK-+++\c-OK' ATH0 \
- TIMEOUT 30 \
- OK ATDT$TELEPHONE \
- CONNECT '' \
- ogin:--ogin: $ACCOUNT \
- assword: $PASSWORD
diff --git a/mdk-stage1/ppp/scripts/ppp-on-rsh b/mdk-stage1/ppp/scripts/ppp-on-rsh
deleted file mode 100755
index 30a50dba6..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on-rsh
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/sh
-#
-# A sample script to establish PPP session(s) via rsh
-#
-# Adi Masputra <adi.masputra@sun.com>
-# Jan 24, 2000
-#
-
-#
-# You'd definitely want to change the following addresses to suit
-# your network configuration
-#
-LOC_IP=10.0.0.1
-REM_IP=10.0.0.2
-NETMASK=255.255.0.0
-
-export LOC_IP REM_IP
-
-#
-# This is the remote peer where in.rshd is running, either
-# its hostname or IP address
-#
-PPPD_RHOST=myremotehost
-
-#
-# For this example, we assume that pppd on both local and remote
-# machines reside in the same place, /usr/local/bin/pppd
-#
-PPPD_LOC=/usr/local/bin/pppd
-
-#
-# The location of local options file (where rsh client is running).
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example. In
-# reality, you'd probably want to remove such option.
-#
-PPPD_LOC_OPT=/etc/ppp/options-rsh-loc
-
-#
-# The location of remote options file (where in.rshd daemon is running).
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example. In
-# reality, you'd probably want to remove such option. Also note that
-# the remote options file need to include the 'notty' option for this
-# to work
-#
-PPPD_REM_OPT=/etc/ppp/options-rsh-rem
-
-#
-# The location of rsh client on the local machine
-#
-RSH_LOC=/bin/rsh
-
-export PPPD_LOC PPPD_LOC_OPT PPPD_REM_OPT PPPD_RHOST RSH_LOC
-
-#
-# Uncomment the following to enable IPv6, note that the IPv6 support
-# needs to be enabled during compilation
-#
-# PPPD_IPV6='+ipv6 ipv6cp-use-ipaddr'
-export PPPD_IPV6
-
-#
-# And execute pppd with the pty option, specifying rsh client as the
-# slave side of the pseduo-tty master/slave pair.
-#
-exec $PPPD_LOC \
- pty '$RSH_LOC $PPPD_RHOST $PPPD_LOC $REM_IP:$LOC_IP $PPPD_IPV6 file $PPPD_REM_OPT' \
- $LOC_IP:$REM_IP netmask $NETMASK $PPPD_IPV6 file $PPPD_LOC_OPT
-
diff --git a/mdk-stage1/ppp/scripts/ppp-on-ssh b/mdk-stage1/ppp/scripts/ppp-on-ssh
deleted file mode 100755
index 0e41acac6..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on-ssh
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/bin/sh
-#
-# A sample script to establish PPP session(s) via SSH 1.x
-#
-# Adi Masputra <adi.masputra@sun.com>
-# Jan 24, 2000
-#
-
-#
-# You'd definitely want to change the following addresses to suit
-# your network configuration
-#
-LOC_IP=10.0.0.1
-REM_IP=10.0.0.2
-NETMASK=255.255.0.0
-
-export LOC_IP REM_IP
-
-#
-# This is the remote peer where sshd is running, either
-# its hostname or IP address
-#
-PPPD_RHOST=myremotehost
-
-#
-# For this example, we assume that pppd on both local and remote
-# machines reside in the same place, /usr/local/bin/pppd
-#
-PPPD_LOC=/usr/local/bin/pppd
-
-#
-# The location of local options file (where ssh client is running).
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example, although
-# some may choose to have it there and rely on ssh authentication
-# instead.
-#
-PPPD_LOC_OPT=/etc/ppp/options-ssh-loc
-
-#
-# The location of remote options file (where sshd daemon is running)
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example, although
-# some may choose to have it there and rely on ssh authentication
-# instead. Also note that the remote options file need to include the 'notty'
-# options for this to work.
-#
-PPPD_REM_OPT=/etc/ppp/options-ssh-rem
-
-#
-# The location of ssh client on the local machine
-#
-SSH_LOC=/usr/local/bin/ssh
-
-export PPPD_LOC PPPD_LOC_OPT PPPD_REM_OPT PPPD_RHOST SSH_LOC
-
-#
-# Uncomment the following to enable IPv6, note that the IPv6 support
-# needs to be enabled during compilation
-#
-# PPPD_IPV6='+ipv6 ipv6cp-use-ipaddr'
-export PPPD_IPV6
-
-#
-# And execute pppd with the pty option, specifying ssh client as the
-# slave side of the pseudo-tty master/slave pair. Note that on this example,
-# ssh has been compiled to allow NULL encryption (thus the '-c none' option),
-# but in reality, you'd probably want to specify the encryption algorithm.
-# See the man page of ssh(1) for details.
-#
-exec $PPPD_LOC \
- pty '$SSH_LOC -c none $PPPD_RHOST $PPPD_LOC $REM_IP:$LOC_IP $PPPD_IPV6 file $PPPD_REM_OPT' \
- $LOC_IP:$REM_IP netmask $NETMASK $PPPD_IPV6 file $PPPD_LOC_OPT
-
diff --git a/mdk-stage1/ppp/scripts/redialer b/mdk-stage1/ppp/scripts/redialer
deleted file mode 100755
index 5bbde4e9d..000000000
--- a/mdk-stage1/ppp/scripts/redialer
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/sh
-###################################################################
-#
-# These parameters control the attack dialing sequence.
-#
-# Maximum number of attempts to reach the telephone number(s)
-MAX_ATTEMPTS=10
-
-# Delay between each of the attempts. This is a parameter to sleep
-# so use "15s" for 15 seconds, "1m" for 1 minute, etc.
-SLEEP_DELAY=15s
-
-###################################################################
-#
-# This is a list of telephone numbers. Add new numbers if you wish
-# and see the function 'callall' below for the dial process.
-PHONE1=555-1212
-PHONE2=411
-
-###################################################################
-#
-# If you use the ppp-on script, then these are passed to this routine
-# automatically. There is no need to define them here. If not, then
-# you will need to set the values.
-#
-ACCOUNT=my_account_name
-PASSWORD=my_password
-
-###################################################################
-#
-# Function to initialize the modem and ensure that it is in command
-# state. This may not be needed, but it doesn't hurt.
-#
-function initialize
-{
- chat -v TIMEOUT 3 '' AT 'OK-+++\c-OK'
- return
-}
-
-###################################################################
-#
-# Script to dial a telephone
-#
-function callnumber
-{
-chat -v \
- ABORT '\nBUSY\r' \
- ABORT '\nNO ANSWER\r' \
- ABORT '\nRINGING\r\n\r\nRINGING\r' \
- '' ATDT$1 \
- CONNECT '' \
- ogin:--ogin: $ACCOUNT \
- assword: $PASSWORD
-#
-# If the connection was successful then end the whole script with a
-# success.
-#
- if [ "$?" = "0" ]; then
- exit 0
- fi
-
- return
-}
-
-###################################################################
-#
-# Script to dial any telephone number
-#
-function callall
-{
-# echo "dialing attempt number: $1" >/dev/console
- callnumber $PHONE1
-# callnumber $PHONE2
-}
-
-###################################################################
-#
-# Initialize the modem to ensure that it is in the command state
-#
-initialize
-if [ ! "$?" = "0" ]; then
- exit 1
-fi
-
-#
-# Dial telephone numbers until one answers
-#
-attempt=0
-while : ; do
- attempt=`expr $attempt + 1`
- callall $attempt
- if [ "$attempt" = "$MAX_ATTEMPTS" ]; then
- exit 1
- fi
- sleep "$SLEEP_DELAY"
-done
diff --git a/mdk-stage1/ppp/scripts/secure-card b/mdk-stage1/ppp/scripts/secure-card
deleted file mode 100644
index a32138b7d..000000000
--- a/mdk-stage1/ppp/scripts/secure-card
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/usr/local/bin/expect -f
-#
-# This script was written by Jim Isaacson <jcisaac@crl.com>. It is
-# designed to work as a script to use the SecureCARD(tm) device. This
-# little device is mated with a central controller. The number displayed
-# on this card changes every so often and you need to enter the number
-# along with your user account name in order to gain access. Since chat
-# is based upon fixed strings this procedure will not work with chat.
-#
-# It is included by permission. An excellent reference for the expect
-# program used by this script is in the book:
-#
-# "Exploring Expect"
-# by Don Libes
-# Published by O'Rielly and Associates
-#
-
-send_user "hello, starting ppp\n"
-
-system "stty 19200 -echoe -echo raw < /dev/cua3 > /dev/cua3"
-
-#
-# These are the parameters for the program.
-#
-set user Pxxxxxx
-set password xxxxxxx
-set modem /dev/cua3
-set dialup <put phone number here>
-set timeout 60
-
-spawn -noecho -open [open $modem "r+"]
-
-send "AT&F\r"
-expect "OK"
-
-send "ATe0v1x4&c1q0&d2&c1s2=128s0=0DT $dialup\r"
-set timeout 15
-set counter 0
-
-set still_connecting 1
-
-expect {
- -re ".*CONNECT.*\n" {
- set timeout 5
- set still_connecting 0
- continue -expect
- }
- -re ".*CONNECT.*\r" {
- set timeout 5
- set still_connecting 0
- continue -expect
- }
- -re ".*NO.*CARRIER" {
- send_user "Failed to Connect, exiting...\n"
- exit
- }
- -re ".*NO.*DIAL.*TONE" {
- send_user "Failed to Connect, exiting...\n"
- exit
- }
- -re ".*VOICE" {
- send_user "Failed to Connect, exiting...\n"
- exit
- }
- -re ".*sscode:.*\n" {
- continue -expect
- }
- -re ".*sscode:" {
- set timeout -1
- expect_user -re "(.*)\n"
- send "$expect_out(1,string)\r"
- set timeout 30
- continue -expect
- }
- -re ".*Next.*:" {
- set timeout -1
- expect_user -re "(.*)\n"
- send "$expect_out(1,string)\r"
- set timeout 30
- continue -expect
- }
- -re "Your.*" {
- send "\r"
- continue -expect
- }
- -re ".*in:" {
- send "$user\r"
- continue -expect
- }
- -re ".*word:" {
- send "$password\r"
- }
-
- timeout {
- if { $still_connecting > 0 } {
- continue -expect
- }
- set timeout 15
- send "\r"
- incr counter
- if { $counter > 8 } {
- send_user "Cannot Connect\n"
- exit
- } else {
- continue -expect
- }
- }
-}
-
-overlay -0 $spawn_id -1 $spawn_id pppd /dev/cua3 19200 192.111.187.215: \
- crtscts modem defaultroute debug
diff --git a/mdk-stage1/ppp/solaris/Makedefs b/mdk-stage1/ppp/solaris/Makedefs
deleted file mode 100644
index 81db8ab2e..000000000
--- a/mdk-stage1/ppp/solaris/Makedefs
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# defines common to several Makefiles
-#
-
-INSTALL= /usr/sbin/install
-
-BINDIR = /usr/local/bin
-MANDIR = /usr/local/man
-ETCDIR = /etc/ppp
-
-COPTS = -O -Xa
-
-# For compiling with gcc, comment out the COPTS definition above and
-# uncomment the next 2 definitions.
-#CC = gcc
-#COPTS = -O2
diff --git a/mdk-stage1/ppp/solaris/Makedefs.sol2 b/mdk-stage1/ppp/solaris/Makedefs.sol2
deleted file mode 100644
index 1282c6e74..000000000
--- a/mdk-stage1/ppp/solaris/Makedefs.sol2
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# Generic make definitions for Solaris 2
-#
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-CPPFLAGS = -D_KERNEL -DSVR4 -DSOL2 -DPRIOQ -DDEBUG -I../include
-CFLAGS = $(CPPFLAGS) $(COPTS)
-
-# lint-specific variables
-LINT = lint
-LINT_OPT_32 =
-LINT_OPT_64 = -Xarch=v9 -errchk=longptr64
-
-LINT_32 =
-LINT_32 += -erroff=E_BAD_PTR_CAST_ALIGN
-LINT_32 += -erroff=E_SUPPRESSION_DIRECTIVE_UNUSED
-LINT_32 += -erroff=E_SUSPICIOUS_COMPARISON
-LINT_32 += -erroff=E_CAST_UINT_TO_SIGNED_INT
-LINT_32 += -erroff=E_PASS_UINT_TO_SIGNED_INT
-LINT_32 += -erroff=E_INVALID_ANNOTATION_NAME
-LINT_32 += -erroff=E_FUNC_ARG_UNUSED
-# This might be needed, but zlib.c and vjcompress.c will squawk
-# when not ignored
-LINT_32 += -erroff=E_CASE_FALLTHRU
-LINT_32 += -erroff=E_RET_INT_IMPLICITLY
-LINT_32 += -erroff=E_FUNC_NO_RET_VAL
-# Some STREAMS macros will be noisy too when this isn't ignored
-LINT_32 += -erroff=E_CONSTANT_CONDITION
-LINT_32 += -erroff=E_CONST_EXPR
-
-# Extra noise suppressant for 64-bit
-EXTRA_OFF =
-EXTRA_OFF += -erroff=E_CAST_INT_TO_SMALL_INT
-EXTRA_OFF += -erroff=E_CAST_INT_CONST_TO_SMALL_INT
-EXTRA_OFF += -erroff=E_CAST_TO_PTR_FROM_INT
-EXTRA_OFF += -erroff=E_ASSIGN_INT_TO_SMALL_INT
-EXTRA_OFF += -erroff=E_ASSIGN_INT_FROM_BIG_CONST
-EXTRA_OFF += -erroff=E_CONST_PROMOTED_UNSIGNED_LL
-EXTRA_OFF += -erroff=E_CONST_PROMOTED_LONG_LONG
-EXTRA_OFF += -erroff=E_CONST_TRUNCATED_BY_ASSIGN
-EXTRA_OFF += -erroff=E_PASS_INT_FROM_BIG_CONST
-EXTRA_OFF += -erroff=E_COMP_INT_WITH_LARGE_INT
-EXTRA_OFF += -erroff=E_ASSIGN_UINT_TO_SIGNED_INT
-EXTRA_OFF += -erroff=E_ASSIGN_NARROW_CONV
-EXTRA_OFF += -erroff=E_PASS_INT_TO_SMALL_INT
-EXTRA_OFF += -erroff=E_PTR_CONV_LOSES_BITS
-
-LINT_64 = $(LINT_32)
-LINT_64 += $(EXTRA_OFF)
-
-LINTFLAGS64 = -Xa -nsxmuF -errtags=yes $(LINT_OPT_64) $(LINT_64)
-LINT64 = $(LINT) -c $(LINTFLAGS64) $(CPPFLAGS)
-
-LINTFLAGS32 = -Xa -nsxmuF -errtags=yes $(LINT_OPT_32) $(LINT_32)
-LINT32 = $(LINT) -c $(LINTFLAGS32) $(CPPFLAGS)
-
diff --git a/mdk-stage1/ppp/solaris/Makefile.sol2 b/mdk-stage1/ppp/solaris/Makefile.sol2
deleted file mode 100644
index 78628847b..000000000
--- a/mdk-stage1/ppp/solaris/Makefile.sol2
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# Makefile for STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-COPTS += -xO2 -xspace -W0,-Lt
-
-COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
- ppp_comp_mod.o
-
-all: ppp ppp_ahdl ppp_comp
-
-ppp: ppp.o ppp_mod.o
- ld -r -o $@ ppp.o ppp_mod.o
- chmod +x $@
-
-ppp_ahdl: ppp_ahdlc.o ppp_ahdlc_mod.o
- ld -r -o $@ ppp_ahdlc.o ppp_ahdlc_mod.o
- chmod +x $@
-
-ppp_comp: $(COMP_OBJS)
- ld -r -o $@ $(COMP_OBJS)
- chmod +x $@
-
-bsd-comp.o: ../modules/bsd-comp.c
- $(CC) $(CFLAGS) -c $?
-deflate.o: ../modules/deflate.c
- $(CC) $(CFLAGS) -c $?
-ppp.o: ppp.c
- $(CC) $(CFLAGS) -c $?
-ppp_mod.o: ppp_mod.c
- $(CC) $(CFLAGS) -c $?
-ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
- $(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ppp_ahdlc.c
- $(CC) $(CFLAGS) -c $?
-ppp_comp.o: ppp_comp.c
- $(CC) $(CFLAGS) -c $?
-ppp_comp_mod.o: ppp_comp_mod.c
- $(CC) $(CFLAGS) -c $?
-vjcompress.o: ../modules/vjcompress.c
- $(CC) $(CFLAGS) -c $?
-zlib.o: ../common/zlib.c
- $(CC) $(CFLAGS) -c $?
-
-install:
- cp ppp ppp.conf /kernel/drv
- cp ppp_comp ppp_ahdl /kernel/strmod
- if grep clone:ppp /etc/minor_perm; then :; else \
- echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
- /usr/sbin/rem_drv ppp 2>/dev/null || true
- /usr/sbin/add_drv ppp
-
-SRCS = ppp.c ppp_mod.c ppp_ahdlc.c ppp_ahdlc_mod.c \
- ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
- ../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
- $(LINT32) $(SRCS)
-
-clean:
- rm -f ppp ppp_comp ppp_ahdl *.o *~ core
- rm -f *.ln
diff --git a/mdk-stage1/ppp/solaris/Makefile.sol2-64 b/mdk-stage1/ppp/solaris/Makefile.sol2-64
deleted file mode 100644
index 63e75fc54..000000000
--- a/mdk-stage1/ppp/solaris/Makefile.sol2-64
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# Makefile for 64-bit STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-# Sun's cc flag for LP64 compilation / linkage
-COPTS += -xchip=ultra -xarch=v9 -Wc,-xcode=abs32 -Wc,-Qiselect-regsym=0 -xO3 -xspace -W0,-Lt
-
-# subdirectory where 64-bit objects / binaries will be placed
-LP64DIR = sparcv9
-
-# Name of legacy Makefile (for 32-bit binaries)
-STD_MAKE = Makefile.sol2
-
-COMP_OBJS = $(LP64DIR)/ppp_comp.o $(LP64DIR)/bsd-comp.o \
- $(LP64DIR)/deflate.o $(LP64DIR)/zlib.o $(LP64DIR)/vjcompress.o \
- $(LP64DIR)/ppp_comp_mod.o
-
-all: std_objs $(LP64DIR) ppp ppp_ahdl ppp_comp
-
-std_objs:
- $(MAKE) -f $(STD_MAKE) all
-
-ppp: $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
- ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
- chmod +x $(LP64DIR)/$@
-
-ppp_ahdl: $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
- ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
- chmod +x $(LP64DIR)/$@
-
-ppp_comp: $(COMP_OBJS)
- ld -r -o $(LP64DIR)/$@ $(COMP_OBJS)
- chmod +x $(LP64DIR)/$@
-
-$(LP64DIR)/bsd-comp.o: ../modules/bsd-comp.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/deflate.o: ../modules/deflate.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp.o: ppp.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_mod.o: ppp_mod.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc.o: ppp_ahdlc.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp.o: ppp_comp.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp_mod.o: ppp_comp_mod.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/vjcompress.o: ../modules/vjcompress.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/zlib.o: ../common/zlib.c
- $(CC) $(CFLAGS) -c $? -o $@
-
-$(LP64DIR):
- mkdir -m 755 -p $@
-
-install:
- cp ppp ppp.conf /kernel/drv
- cp ppp_comp ppp_ahdl /kernel/strmod
- cp $(LP64DIR)/ppp /kernel/drv/$(LP64DIR)
- cp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl /kernel/strmod/$(LP64DIR)
- if grep clone:ppp /etc/minor_perm; then :; else \
- echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
- /usr/sbin/rem_drv ppp 2>/dev/null || true
- /usr/sbin/add_drv ppp
-
-SRCS = ppp.c ppp_mod.c ppp_ahdlc.c ppp_ahdlc_mod.c \
- ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
- ../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
- $(LINT64) $(SRCS)
-
-lint-32:
- $(LINT32) $(SRCS)
-
-clean:
- $(MAKE) -f $(STD_MAKE) clean
- rm -f $(LP64DIR)/ppp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl $(LP64DIR)/*.o $(LP64DIR)/*~ $(LP64DIR)/core
diff --git a/mdk-stage1/ppp/solaris/Makefile.top b/mdk-stage1/ppp/solaris/Makefile.top
deleted file mode 100644
index f1200b852..000000000
--- a/mdk-stage1/ppp/solaris/Makefile.top
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# ppp top level makefile for SVR4 and Solaris 2
-#
-# $Id$
-#
-
-include solaris/Makedefs
-
-all:
- cd chat; $(MAKE) all
- cd pppd; $(MAKE) all
- cd pppstats; $(MAKE) all
- cd pppdump; $(MAKE) all
- cd solaris; $(MAKE) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
- cd chat; $(MAKE) install
- cd pppd; $(MAKE) install
- cd pppstats; $(MAKE) install
- cd pppdump; $(MAKE) install
- cd solaris; $(MAKE) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
- $(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
- cp etc.ppp/options $@
- chmod go-w $@
-$(ETCDIR)/pap-secrets:
- $(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/pap-secrets
-$(ETCDIR)/chap-secrets:
- $(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/chap-secrets
-
-$(BINDIR):
- mkdir -m 755 -p $@
-$(MANDIR)/man8:
- mkdir -m 755 -p $@
-$(ETCDIR):
- mkdir -m 755 -p $@
-
-clean:
- rm -f *~
- cd chat; $(MAKE) clean
- cd pppd; $(MAKE) clean
- cd pppstats; $(MAKE) clean
- cd pppdump; $(MAKE) clean
- cd solaris; $(MAKE) clean
-
diff --git a/mdk-stage1/ppp/solaris/ppp.c b/mdk-stage1/ppp/solaris/ppp.c
deleted file mode 100644
index 44bf08dff..000000000
--- a/mdk-stage1/ppp/solaris/ppp.c
+++ /dev/null
@@ -1,2486 +0,0 @@
-/*
- * ppp.c - STREAMS multiplexing pseudo-device driver for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/errno.h>
-#ifdef __osf__
-#include <sys/ioctl.h>
-#include <sys/cmn_err.h>
-#define queclass(mp) ((mp)->b_band & QPCTL)
-#else
-#include <sys/ioccom.h>
-#endif
-#include <sys/time.h>
-#ifdef SVR4
-#include <sys/cmn_err.h>
-#include <sys/conf.h>
-#include <sys/dlpi.h>
-#include <sys/ddi.h>
-#ifdef SOL2
-#include <sys/ksynch.h>
-#include <sys/kstat.h>
-#include <sys/sunddi.h>
-#include <sys/ethernet.h>
-#else
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <net/if.h>
-#include <netinet/in.h>
-#endif /* SOL2 */
-#else /* not SVR4 */
-#include <sys/user.h>
-#endif /* SVR4 */
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Modifications marked with #ifdef PRIOQ are for priority queueing of
- * interactive traffic, and are due to Marko Zec <zec@japa.tel.fer.hr>.
- */
-#ifdef PRIOQ
-#endif /* PRIOQ */
-
-#include <netinet/in.h> /* leave this outside of PRIOQ for htons */
-
-#ifdef __STDC__
-#define __P(x) x
-#else
-#define __P(x) ()
-#endif
-
-/*
- * The IP module may use this SAP value for IP packets.
- */
-#ifndef ETHERTYPE_IP
-#define ETHERTYPE_IP 0x800
-#endif
-
-#if !defined(ETHERTYPE_IPV6)
-#define ETHERTYPE_IPV6 0x86dd
-#endif /* !defined(ETHERTYPE_IPV6) */
-
-#if !defined(ETHERTYPE_ALLSAP) && defined(SOL2)
-#define ETHERTYPE_ALLSAP 0
-#endif /* !defined(ETHERTYPE_ALLSAP) && defined(SOL2) */
-
-#if !defined(PPP_ALLSAP) && defined(SOL2)
-#define PPP_ALLSAP PPP_ALLSTATIONS
-#endif /* !defined(PPP_ALLSAP) && defined(SOL2) */
-
-extern time_t time;
-
-#ifdef SOL2
-/*
- * We use this reader-writer lock to ensure that the lower streams
- * stay connected to the upper streams while the lower-side put and
- * service procedures are running. Essentially it is an existence
- * lock for the upper stream associated with each lower stream.
- */
-krwlock_t ppp_lower_lock;
-#define LOCK_LOWER_W rw_enter(&ppp_lower_lock, RW_WRITER)
-#define LOCK_LOWER_R rw_enter(&ppp_lower_lock, RW_READER)
-#define TRYLOCK_LOWER_R rw_tryenter(&ppp_lower_lock, RW_READER)
-#define UNLOCK_LOWER rw_exit(&ppp_lower_lock)
-
-#define MT_ENTER(x) mutex_enter(x)
-#define MT_EXIT(x) mutex_exit(x)
-
-/*
- * Notes on multithreaded implementation for Solaris 2:
- *
- * We use an inner perimeter around each queue pair and an outer
- * perimeter around the whole driver. The inner perimeter is
- * entered exclusively for all entry points (open, close, put,
- * service). The outer perimeter is entered exclusively for open
- * and close and shared for put and service. This is all done for
- * us by the streams framework.
- *
- * I used to think that the perimeters were entered for the lower
- * streams' put and service routines as well as for the upper streams'.
- * Because of problems experienced by people, and after reading the
- * documentation more closely, I now don't think that is true. So we
- * now use ppp_lower_lock to give us an existence guarantee on the
- * upper stream controlling each lower stream.
- *
- * Shared entry to the outer perimeter protects the existence of all
- * the upper streams and their upperstr_t structures, and guarantees
- * that the following fields of any upperstr_t won't change:
- * nextmn, next, nextppa. It guarantees that the lowerq field of an
- * upperstr_t won't go from non-zero to zero, that the global `ppas'
- * won't change and that the no lower stream will get unlinked.
- *
- * Shared (reader) access to ppa_lower_lock guarantees that no lower
- * stream will be unlinked and that the lowerq field of all upperstr_t
- * structures won't change.
- */
-
-#else /* SOL2 */
-#define LOCK_LOWER_W 0
-#define LOCK_LOWER_R 0
-#define TRYLOCK_LOWER_R 1
-#define UNLOCK_LOWER 0
-#define MT_ENTER(x) 0
-#define MT_EXIT(x) 0
-
-#endif /* SOL2 */
-
-/*
- * Private information; one per upper stream.
- */
-typedef struct upperstr {
- minor_t mn; /* minor device number */
- struct upperstr *nextmn; /* next minor device */
- queue_t *q; /* read q associated with this upper stream */
- int flags; /* flag bits, see below */
- int state; /* current DLPI state */
- int sap; /* service access point */
- int req_sap; /* which SAP the DLPI client requested */
- struct upperstr *ppa; /* control stream for our ppa */
- struct upperstr *next; /* next stream for this ppa */
- uint ioc_id; /* last ioctl ID for this stream */
- enum NPmode npmode; /* what to do with packets on this SAP */
- unsigned char rblocked; /* flow control has blocked upper read strm */
- /* N.B. rblocked is only changed by control stream's put/srv procs */
- /*
- * There is exactly one control stream for each PPA.
- * The following fields are only used for control streams.
- */
- int ppa_id;
- queue_t *lowerq; /* write queue attached below this PPA */
- struct upperstr *nextppa; /* next control stream */
- int mru;
- int mtu;
- struct pppstat stats; /* statistics */
- time_t last_sent; /* time last NP packet sent */
- time_t last_recv; /* time last NP packet rcvd */
-#ifdef SOL2
- kmutex_t stats_lock; /* lock for stats updates */
- kstat_t *kstats; /* stats for netstat */
-#endif /* SOL2 */
-#ifdef LACHTCP
- int ifflags;
- char ifname[IFNAMSIZ];
- struct ifstats ifstats;
-#endif /* LACHTCP */
-} upperstr_t;
-
-/* Values for flags */
-#define US_PRIV 1 /* stream was opened by superuser */
-#define US_CONTROL 2 /* stream is a control stream */
-#define US_BLOCKED 4 /* flow ctrl has blocked lower write stream */
-#define US_LASTMOD 8 /* no PPP modules below us */
-#define US_DBGLOG 0x10 /* log various occurrences */
-#define US_RBLOCKED 0x20 /* flow ctrl has blocked upper read stream */
-
-#if defined(SOL2)
-#if DL_CURRENT_VERSION >= 2
-#define US_PROMISC 0x40 /* stream is promiscuous */
-#endif /* DL_CURRENT_VERSION >= 2 */
-#define US_RAWDATA 0x80 /* raw M_DATA, no DLPI header */
-#endif /* defined(SOL2) */
-
-#ifdef PRIOQ
-static u_char max_band=0;
-static u_char def_band=0;
-
-#define IPPORT_DEFAULT 65535
-
-/*
- * Port priority table
- * Highest priority ports are listed first, lowest are listed last.
- * ICMP & packets using unlisted ports will be treated as "default".
- * If IPPORT_DEFAULT is not listed here, "default" packets will be
- * assigned lowest priority.
- * Each line should be terminated with "0".
- * Line containing only "0" marks the end of the list.
- */
-
-static u_short prioq_table[]= {
- 113, 53, 0,
- 22, 23, 513, 517, 518, 0,
- 514, 21, 79, 111, 0,
- 25, 109, 110, 0,
- IPPORT_DEFAULT, 0,
- 20, 70, 80, 8001, 8008, 8080, 0, /* 8001,8008,8080 - common proxy ports */
-0 };
-
-#endif /* PRIOQ */
-
-
-static upperstr_t *minor_devs = NULL;
-static upperstr_t *ppas = NULL;
-
-#ifdef SVR4
-static int pppopen __P((queue_t *, dev_t *, int, int, cred_t *));
-static int pppclose __P((queue_t *, int, cred_t *));
-#else
-static int pppopen __P((queue_t *, int, int, int));
-static int pppclose __P((queue_t *, int));
-#endif /* SVR4 */
-static int pppurput __P((queue_t *, mblk_t *));
-static int pppuwput __P((queue_t *, mblk_t *));
-static int pppursrv __P((queue_t *));
-static int pppuwsrv __P((queue_t *));
-static int ppplrput __P((queue_t *, mblk_t *));
-static int ppplwput __P((queue_t *, mblk_t *));
-static int ppplrsrv __P((queue_t *));
-static int ppplwsrv __P((queue_t *));
-#ifndef NO_DLPI
-static void dlpi_request __P((queue_t *, mblk_t *, upperstr_t *));
-static void dlpi_error __P((queue_t *, upperstr_t *, int, int, int));
-static void dlpi_ok __P((queue_t *, int));
-#endif
-static int send_data __P((mblk_t *, upperstr_t *));
-static void new_ppa __P((queue_t *, mblk_t *));
-static void attach_ppa __P((queue_t *, mblk_t *));
-static void detach_ppa __P((queue_t *, mblk_t *));
-static void detach_lower __P((queue_t *, mblk_t *));
-static void debug_dump __P((queue_t *, mblk_t *));
-static upperstr_t *find_dest __P((upperstr_t *, int));
-#if defined(SOL2)
-static upperstr_t *find_promisc __P((upperstr_t *, int));
-static mblk_t *prepend_ether __P((upperstr_t *, mblk_t *, int));
-static mblk_t *prepend_udind __P((upperstr_t *, mblk_t *, int));
-static void promisc_sendup __P((upperstr_t *, mblk_t *, int, int));
-#endif /* defined(SOL2) */
-static int putctl2 __P((queue_t *, int, int, int));
-static int putctl4 __P((queue_t *, int, int, int));
-static int pass_packet __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#ifdef FILTER_PACKETS
-static int ip_hard_filter __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#endif /* FILTER_PACKETS */
-
-#define PPP_ID 0xb1a6
-static struct module_info ppp_info = {
-#ifdef PRIOQ
- PPP_ID, "ppp", 0, 512, 512, 384
-#else
- PPP_ID, "ppp", 0, 512, 512, 128
-#endif /* PRIOQ */
-};
-
-static struct qinit pppurint = {
- pppurput, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL
-};
-
-static struct qinit pppuwint = {
- pppuwput, pppuwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplrint = {
- ppplrput, ppplrsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplwint = {
- ppplwput, ppplwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-#ifdef LACHTCP
-extern struct ifstats *ifstats;
-int pppdevflag = 0;
-#endif
-
-struct streamtab pppinfo = {
- &pppurint, &pppuwint,
- &ppplrint, &ppplwint
-};
-
-int ppp_count;
-
-/*
- * How we maintain statistics.
- */
-#ifdef SOL2
-#define INCR_IPACKETS(ppa) \
- if (ppa->kstats != 0) { \
- KSTAT_NAMED_PTR(ppa->kstats)[0].value.ul++; \
- }
-#define INCR_IERRORS(ppa) \
- if (ppa->kstats != 0) { \
- KSTAT_NAMED_PTR(ppa->kstats)[1].value.ul++; \
- }
-#define INCR_OPACKETS(ppa) \
- if (ppa->kstats != 0) { \
- KSTAT_NAMED_PTR(ppa->kstats)[2].value.ul++; \
- }
-#define INCR_OERRORS(ppa) \
- if (ppa->kstats != 0) { \
- KSTAT_NAMED_PTR(ppa->kstats)[3].value.ul++; \
- }
-#endif
-
-#ifdef LACHTCP
-#define INCR_IPACKETS(ppa) ppa->ifstats.ifs_ipackets++;
-#define INCR_IERRORS(ppa) ppa->ifstats.ifs_ierrors++;
-#define INCR_OPACKETS(ppa) ppa->ifstats.ifs_opackets++;
-#define INCR_OERRORS(ppa) ppa->ifstats.ifs_oerrors++;
-#endif
-
-/*
- * STREAMS driver entry points.
- */
-static int
-#ifdef SVR4
-pppopen(q, devp, oflag, sflag, credp)
- queue_t *q;
- dev_t *devp;
- int oflag, sflag;
- cred_t *credp;
-#else
-pppopen(q, dev, oflag, sflag)
- queue_t *q;
- int dev; /* really dev_t */
- int oflag, sflag;
-#endif
-{
- upperstr_t *up;
- upperstr_t **prevp;
- minor_t mn;
-#ifdef PRIOQ
- u_short *ptr;
- u_char new_band;
-#endif /* PRIOQ */
-
- if (q->q_ptr)
- DRV_OPEN_OK(dev); /* device is already open */
-
-#ifdef PRIOQ
- /* Calculate max_bband & def_band from definitions in prioq.h
- This colud be done at some more approtiate time (less often)
- but this way it works well so I'll just leave it here */
-
- max_band = 1;
- def_band = 0;
- ptr = prioq_table;
- while (*ptr) {
- new_band = 1;
- while (*ptr)
- if (*ptr++ == IPPORT_DEFAULT) {
- new_band = 0;
- def_band = max_band;
- }
- max_band += new_band;
- ptr++;
- }
- if (def_band)
- def_band = max_band - def_band;
- --max_band;
-#endif /* PRIOQ */
-
- if (sflag == CLONEOPEN) {
- mn = 0;
- for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
- if (up->mn != mn)
- break;
- ++mn;
- }
- } else {
-#ifdef SVR4
- mn = getminor(*devp);
-#else
- mn = minor(dev);
-#endif
- for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
- if (up->mn >= mn)
- break;
- }
- if (up->mn == mn) {
- /* this can't happen */
- q->q_ptr = WR(q)->q_ptr = (caddr_t) up;
- DRV_OPEN_OK(dev);
- }
- }
-
- /*
- * Construct a new minor node.
- */
- up = (upperstr_t *) ALLOC_SLEEP(sizeof(upperstr_t));
- bzero((caddr_t) up, sizeof(upperstr_t));
- if (up == 0) {
- DPRINT("pppopen: out of kernel memory\n");
- OPEN_ERROR(ENXIO);
- }
- up->nextmn = *prevp;
- *prevp = up;
- up->mn = mn;
-#ifdef SVR4
- *devp = makedevice(getmajor(*devp), mn);
-#endif
- up->q = q;
- if (NOTSUSER() == 0)
- up->flags |= US_PRIV;
-#ifndef NO_DLPI
- up->state = DL_UNATTACHED;
-#endif
-#ifdef LACHTCP
- up->ifflags = IFF_UP | IFF_POINTOPOINT;
-#endif
- up->sap = -1;
- up->last_sent = up->last_recv = time;
- up->npmode = NPMODE_DROP;
- q->q_ptr = (caddr_t) up;
- WR(q)->q_ptr = (caddr_t) up;
- noenable(WR(q));
-#ifdef SOL2
- mutex_init(&up->stats_lock, NULL, MUTEX_DRIVER, NULL);
-#endif
- ++ppp_count;
-
- qprocson(q);
- DRV_OPEN_OK(makedev(major(dev), mn));
-}
-
-static int
-#ifdef SVR4
-pppclose(q, flag, credp)
- queue_t *q;
- int flag;
- cred_t *credp;
-#else
-pppclose(q, flag)
- queue_t *q;
- int flag;
-#endif
-{
- upperstr_t *up, **upp;
- upperstr_t *as, *asnext;
- upperstr_t **prevp;
-
- qprocsoff(q);
-
- up = (upperstr_t *) q->q_ptr;
- if (up == 0) {
- DPRINT("pppclose: q_ptr = 0\n");
- return 0;
- }
- if (up->flags & US_DBGLOG)
- DPRINT2("ppp/%d: close, flags=%x\n", up->mn, up->flags);
- if (up->flags & US_CONTROL) {
-#ifdef LACHTCP
- struct ifstats *ifp, *pifp;
-#endif
- if (up->lowerq != 0) {
- /* Gack! the lower stream should have be unlinked earlier! */
- DPRINT1("ppp%d: lower stream still connected on close?\n",
- up->mn);
- LOCK_LOWER_W;
- up->lowerq->q_ptr = 0;
- RD(up->lowerq)->q_ptr = 0;
- up->lowerq = 0;
- UNLOCK_LOWER;
- }
-
- /*
- * This stream represents a PPA:
- * For all streams attached to the PPA, clear their
- * references to this PPA.
- * Then remove this PPA from the list of PPAs.
- */
- for (as = up->next; as != 0; as = asnext) {
- asnext = as->next;
- as->next = 0;
- as->ppa = 0;
- if (as->flags & US_BLOCKED) {
- as->flags &= ~US_BLOCKED;
- flushq(WR(as->q), FLUSHDATA);
- }
- }
- for (upp = &ppas; *upp != 0; upp = &(*upp)->nextppa)
- if (*upp == up) {
- *upp = up->nextppa;
- break;
- }
-#ifdef LACHTCP
- /* Remove the statistics from the active list. */
- for (ifp = ifstats, pifp = 0; ifp; ifp = ifp->ifs_next) {
- if (ifp == &up->ifstats) {
- if (pifp)
- pifp->ifs_next = ifp->ifs_next;
- else
- ifstats = ifp->ifs_next;
- break;
- }
- pifp = ifp;
- }
-#endif
- } else {
- /*
- * If this stream is attached to a PPA,
- * remove it from the PPA's list.
- */
- if ((as = up->ppa) != 0) {
- for (; as->next != 0; as = as->next)
- if (as->next == up) {
- as->next = up->next;
- break;
- }
- }
- }
-
-#ifdef SOL2
- if (up->kstats)
- kstat_delete(up->kstats);
- mutex_destroy(&up->stats_lock);
-#endif
-
- q->q_ptr = NULL;
- WR(q)->q_ptr = NULL;
-
- for (prevp = &minor_devs; *prevp != 0; prevp = &(*prevp)->nextmn) {
- if (*prevp == up) {
- *prevp = up->nextmn;
- break;
- }
- }
- FREE(up, sizeof(upperstr_t));
- --ppp_count;
-
- return 0;
-}
-
-/*
- * A message from on high. We do one of three things:
- * - qreply()
- * - put the message on the lower write stream
- * - queue it for our service routine
- */
-static int
-pppuwput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us, *ppa, *nps;
- struct iocblk *iop;
- struct linkblk *lb;
-#ifdef LACHTCP
- struct ifreq *ifr;
- int i;
-#endif
- queue_t *lq;
- int error, n, sap;
- mblk_t *mq;
- struct ppp_idle *pip;
-#ifdef PRIOQ
- queue_t *tlq;
-#endif /* PRIOQ */
-#ifdef NO_DLPI
- upperstr_t *os;
-#endif
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("pppuwput: q_ptr = 0!\n");
- return 0;
- }
- if (mp == 0) {
- DPRINT1("pppuwput/%d: mp = 0!\n", us->mn);
- return 0;
- }
- if (mp->b_datap == 0) {
- DPRINT1("pppuwput/%d: mp->b_datap = 0!\n", us->mn);
- return 0;
- }
- switch (mp->b_datap->db_type) {
-#ifndef NO_DLPI
- case M_PCPROTO:
- case M_PROTO:
- dlpi_request(q, mp, us);
- break;
-#endif /* NO_DLPI */
-
- case M_DATA:
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: uwput M_DATA len=%d flags=%x\n",
- us->mn, msgdsize(mp), us->flags);
- if (us->ppa == 0 || msgdsize(mp) > us->ppa->mtu + PPP_HDRLEN
-#ifndef NO_DLPI
- || (us->flags & US_CONTROL) == 0
-#endif /* NO_DLPI */
- ) {
- DPRINT1("pppuwput: junk data len=%d\n", msgdsize(mp));
- freemsg(mp);
- break;
- }
-#ifdef NO_DLPI
- if ((us->flags & US_CONTROL) == 0 && !pass_packet(us, mp, 1))
- break;
-#endif
- if (!send_data(mp, us))
- putq(q, mp);
- break;
-
- case M_IOCTL:
- iop = (struct iocblk *) mp->b_rptr;
- error = EINVAL;
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: ioctl %x count=%d\n",
- us->mn, iop->ioc_cmd, iop->ioc_count);
- switch (iop->ioc_cmd) {
-#if defined(SOL2)
- case DLIOCRAW: /* raw M_DATA mode */
- us->flags |= US_RAWDATA;
- error = 0;
- break;
-#endif /* defined(SOL2) */
- case I_LINK:
- if ((us->flags & US_CONTROL) == 0 || us->lowerq != 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl I_LINK b_cont = 0!\n", us->mn);
- break;
- }
- lb = (struct linkblk *) mp->b_cont->b_rptr;
- lq = lb->l_qbot;
- if (lq == 0) {
- DPRINT1("pppuwput/%d: ioctl I_LINK l_qbot = 0!\n", us->mn);
- break;
- }
- LOCK_LOWER_W;
- us->lowerq = lq;
- lq->q_ptr = (caddr_t) q;
- RD(lq)->q_ptr = (caddr_t) us->q;
- UNLOCK_LOWER;
- iop->ioc_count = 0;
- error = 0;
- us->flags &= ~US_LASTMOD;
- /* Unblock upper streams which now feed this lower stream. */
- qenable(q);
- /* Send useful information down to the modules which
- are now linked below us. */
- putctl2(lq, M_CTL, PPPCTL_UNIT, us->ppa_id);
- putctl4(lq, M_CTL, PPPCTL_MRU, us->mru);
- putctl4(lq, M_CTL, PPPCTL_MTU, us->mtu);
-#ifdef PRIOQ
- /* Lower tty driver's queue hiwat/lowat from default 4096/128
- to 256/128 since we don't want queueing of data on
- output to physical device */
-
- freezestr(lq);
- for (tlq = lq; tlq->q_next != NULL; tlq = tlq->q_next)
- ;
- strqset(tlq, QHIWAT, 0, 256);
- strqset(tlq, QLOWAT, 0, 128);
- unfreezestr(lq);
-#endif /* PRIOQ */
- break;
-
- case I_UNLINK:
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl I_UNLINK b_cont = 0!\n", us->mn);
- break;
- }
- lb = (struct linkblk *) mp->b_cont->b_rptr;
-#if DEBUG
- if (us->lowerq != lb->l_qbot) {
- DPRINT2("ppp unlink: lowerq=%x qbot=%x\n",
- us->lowerq, lb->l_qbot);
- break;
- }
-#endif
- iop->ioc_count = 0;
- qwriter(q, mp, detach_lower, PERIM_OUTER);
- error = -1;
- break;
-
- case PPPIO_NEWPPA:
- if (us->flags & US_CONTROL)
- break;
- if ((us->flags & US_PRIV) == 0) {
- error = EPERM;
- break;
- }
- /* Arrange to return an int */
- if ((mq = mp->b_cont) == 0
- || mq->b_datap->db_lim - mq->b_rptr < sizeof(int)) {
- mq = allocb(sizeof(int), BPRI_HI);
- if (mq == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = mq;
- mq->b_cont = 0;
- }
- iop->ioc_count = sizeof(int);
- mq->b_wptr = mq->b_rptr + sizeof(int);
- qwriter(q, mp, new_ppa, PERIM_OUTER);
- error = -1;
- break;
-
- case PPPIO_ATTACH:
- /* like dlpi_attach, for programs which can't write to
- the stream (like pppstats) */
- if (iop->ioc_count != sizeof(int) || us->ppa != 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_ATTACH b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
- if (ppa->ppa_id == n)
- break;
- if (ppa == 0)
- break;
- us->ppa = ppa;
- iop->ioc_count = 0;
- qwriter(q, mp, attach_ppa, PERIM_OUTER);
- error = -1;
- break;
-
-#ifdef NO_DLPI
- case PPPIO_BIND:
- /* Attach to a given SAP. */
- if (iop->ioc_count != sizeof(int) || us->ppa == 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_BIND b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- /* n must be a valid PPP network protocol number. */
- if (n < 0x21 || n > 0x3fff || (n & 0x101) != 1)
- break;
- /* check that no other stream is bound to this sap already. */
- for (os = us->ppa; os != 0; os = os->next)
- if (os->sap == n)
- break;
- if (os != 0)
- break;
- us->sap = n;
- iop->ioc_count = 0;
- error = 0;
- break;
-#endif /* NO_DLPI */
-
- case PPPIO_MRU:
- if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_MRU b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- if (n <= 0 || n > PPP_MAXMRU)
- break;
- if (n < PPP_MRU)
- n = PPP_MRU;
- us->mru = n;
- if (us->lowerq)
- putctl4(us->lowerq, M_CTL, PPPCTL_MRU, n);
- error = 0;
- iop->ioc_count = 0;
- break;
-
- case PPPIO_MTU:
- if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_MTU b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- if (n <= 0 || n > PPP_MAXMTU)
- break;
- us->mtu = n;
-#ifdef LACHTCP
- /* The MTU reported in netstat, not used as IP max packet size! */
- us->ifstats.ifs_mtu = n;
-#endif
- if (us->lowerq)
- putctl4(us->lowerq, M_CTL, PPPCTL_MTU, n);
- error = 0;
- iop->ioc_count = 0;
- break;
-
- case PPPIO_LASTMOD:
- us->flags |= US_LASTMOD;
- error = 0;
- break;
-
- case PPPIO_DEBUG:
- if (iop->ioc_count != sizeof(int))
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_DEBUG b_cont = 0!\n", us->mn);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- if (n == PPPDBG_DUMP + PPPDBG_DRIVER) {
- qwriter(q, NULL, debug_dump, PERIM_OUTER);
- iop->ioc_count = 0;
- error = -1;
- } else if (n == PPPDBG_LOG + PPPDBG_DRIVER) {
- DPRINT1("ppp/%d: debug log enabled\n", us->mn);
- us->flags |= US_DBGLOG;
- iop->ioc_count = 0;
- error = 0;
- } else {
- if (us->ppa == 0 || us->ppa->lowerq == 0)
- break;
- putnext(us->ppa->lowerq, mp);
- error = -1;
- }
- break;
-
- case PPPIO_NPMODE:
- if (iop->ioc_count != 2 * sizeof(int))
- break;
- if ((us->flags & US_CONTROL) == 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("pppuwput/%d: ioctl PPPIO_NPMODE b_cont = 0!\n", us->mn);
- break;
- }
- sap = ((int *)mp->b_cont->b_rptr)[0];
- for (nps = us->next; nps != 0; nps = nps->next) {
- if (us->flags & US_DBGLOG)
- DPRINT2("us = 0x%x, us->next->sap = 0x%x\n", nps, nps->sap);
- if (nps->sap == sap)
- break;
- }
- if (nps == 0) {
- if (us->flags & US_DBGLOG)
- DPRINT2("ppp/%d: no stream for sap %x\n", us->mn, sap);
- break;
- }
- /* XXX possibly should use qwriter here */
- nps->npmode = (enum NPmode) ((int *)mp->b_cont->b_rptr)[1];
- if (nps->npmode != NPMODE_QUEUE && (nps->flags & US_BLOCKED) != 0)
- qenable(WR(nps->q));
- iop->ioc_count = 0;
- error = 0;
- break;
-
- case PPPIO_GIDLE:
- if ((ppa = us->ppa) == 0)
- break;
- mq = allocb(sizeof(struct ppp_idle), BPRI_HI);
- if (mq == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = mq;
- mq->b_cont = 0;
- pip = (struct ppp_idle *) mq->b_wptr;
- pip->xmit_idle = time - ppa->last_sent;
- pip->recv_idle = time - ppa->last_recv;
- mq->b_wptr += sizeof(struct ppp_idle);
- iop->ioc_count = sizeof(struct ppp_idle);
- error = 0;
- break;
-
-#ifdef LACHTCP
- case SIOCSIFNAME:
- /* Sent from IP down to us. Attach the ifstats structure. */
- if (iop->ioc_count != sizeof(struct ifreq) || us->ppa == 0)
- break;
- ifr = (struct ifreq *)mp->b_cont->b_rptr;
- /* Find the unit number in the interface name. */
- for (i = 0; i < IFNAMSIZ; i++) {
- if (ifr->ifr_name[i] == 0 ||
- (ifr->ifr_name[i] >= '0' &&
- ifr->ifr_name[i] <= '9'))
- break;
- else
- us->ifname[i] = ifr->ifr_name[i];
- }
- us->ifname[i] = 0;
-
- /* Convert the unit number to binary. */
- for (n = 0; i < IFNAMSIZ; i++) {
- if (ifr->ifr_name[i] == 0) {
- break;
- }
- else {
- n = n * 10 + ifr->ifr_name[i] - '0';
- }
- }
-
- /* Verify the ppa. */
- if (us->ppa->ppa_id != n)
- break;
- ppa = us->ppa;
-
- /* Set up the netstat block. */
- strncpy (ppa->ifname, us->ifname, IFNAMSIZ);
-
- ppa->ifstats.ifs_name = ppa->ifname;
- ppa->ifstats.ifs_unit = n;
- ppa->ifstats.ifs_active = us->state != DL_UNBOUND;
- ppa->ifstats.ifs_mtu = ppa->mtu;
-
- /* Link in statistics used by netstat. */
- ppa->ifstats.ifs_next = ifstats;
- ifstats = &ppa->ifstats;
-
- iop->ioc_count = 0;
- error = 0;
- break;
-
- case SIOCGIFFLAGS:
- if (!(us->flags & US_CONTROL)) {
- if (us->ppa)
- us = us->ppa;
- else
- break;
- }
- ((struct iocblk_in *)iop)->ioc_ifflags = us->ifflags;
- error = 0;
- break;
-
- case SIOCSIFFLAGS:
- if (!(us->flags & US_CONTROL)) {
- if (us->ppa)
- us = us->ppa;
- else
- break;
- }
- us->ifflags = ((struct iocblk_in *)iop)->ioc_ifflags;
- error = 0;
- break;
-
- case SIOCSIFADDR:
- if (!(us->flags & US_CONTROL)) {
- if (us->ppa)
- us = us->ppa;
- else
- break;
- }
- us->ifflags |= IFF_RUNNING;
- ((struct iocblk_in *)iop)->ioc_ifflags |= IFF_RUNNING;
- error = 0;
- break;
-
- case SIOCSIFMTU:
- /*
- * Vanilla SVR4 systems don't handle SIOCSIFMTU, rather
- * they take the MTU from the DL_INFO_ACK we sent in response
- * to their DL_INFO_REQ. Fortunately, they will update the
- * MTU if we send an unsolicited DL_INFO_ACK up.
- */
- if ((mq = allocb(sizeof(dl_info_req_t), BPRI_HI)) == 0)
- break; /* should do bufcall */
- ((union DL_primitives *)mq->b_rptr)->dl_primitive = DL_INFO_REQ;
- mq->b_wptr = mq->b_rptr + sizeof(dl_info_req_t);
- dlpi_request(q, mq, us);
- error = 0;
- break;
-
- case SIOCGIFNETMASK:
- case SIOCSIFNETMASK:
- case SIOCGIFADDR:
- case SIOCGIFDSTADDR:
- case SIOCSIFDSTADDR:
- case SIOCGIFMETRIC:
- error = 0;
- break;
-#endif /* LACHTCP */
-
- default:
- if (us->ppa == 0 || us->ppa->lowerq == 0)
- break;
- us->ioc_id = iop->ioc_id;
- error = -1;
- switch (iop->ioc_cmd) {
- case PPPIO_GETSTAT:
- case PPPIO_GETCSTAT:
- if (us->flags & US_LASTMOD) {
- error = EINVAL;
- break;
- }
- putnext(us->ppa->lowerq, mp);
- break;
- default:
- if (us->flags & US_PRIV)
- putnext(us->ppa->lowerq, mp);
- else {
- DPRINT1("ppp ioctl %x rejected\n", iop->ioc_cmd);
- error = EPERM;
- }
- break;
- }
- break;
- }
-
- if (error > 0) {
- iop->ioc_error = error;
- mp->b_datap->db_type = M_IOCNAK;
- qreply(q, mp);
- } else if (error == 0) {
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
- }
- break;
-
- case M_FLUSH:
- if (us->flags & US_DBGLOG)
- DPRINT2("ppp/%d: flush %x\n", us->mn, *mp->b_rptr);
- if (*mp->b_rptr & FLUSHW)
- flushq(q, FLUSHDATA);
- if (*mp->b_rptr & FLUSHR) {
- *mp->b_rptr &= ~FLUSHW;
- qreply(q, mp);
- } else
- freemsg(mp);
- break;
-
- default:
- freemsg(mp);
- break;
- }
- return 0;
-}
-
-#ifndef NO_DLPI
-static void
-dlpi_request(q, mp, us)
- queue_t *q;
- mblk_t *mp;
- upperstr_t *us;
-{
- union DL_primitives *d = (union DL_primitives *) mp->b_rptr;
- int size = mp->b_wptr - mp->b_rptr;
- mblk_t *reply, *np;
- upperstr_t *ppa, *os;
- int sap, len;
- dl_info_ack_t *info;
- dl_bind_ack_t *ackp;
-#if DL_CURRENT_VERSION >= 2
- dl_phys_addr_ack_t *paddrack;
- static struct ether_addr eaddr = {0};
-#endif
-
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: dlpi prim %x len=%d\n", us->mn,
- d->dl_primitive, size);
- switch (d->dl_primitive) {
- case DL_INFO_REQ:
- if (size < sizeof(dl_info_req_t))
- goto badprim;
- if ((reply = allocb(sizeof(dl_info_ack_t), BPRI_HI)) == 0)
- break; /* should do bufcall */
- reply->b_datap->db_type = M_PCPROTO;
- info = (dl_info_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_info_ack_t);
- bzero((caddr_t) info, sizeof(dl_info_ack_t));
- info->dl_primitive = DL_INFO_ACK;
- info->dl_max_sdu = us->ppa? us->ppa->mtu: PPP_MAXMTU;
- info->dl_min_sdu = 1;
- info->dl_addr_length = sizeof(uint);
- info->dl_mac_type = DL_ETHER; /* a bigger lie */
- info->dl_current_state = us->state;
- info->dl_service_mode = DL_CLDLS;
- info->dl_provider_style = DL_STYLE2;
-#if DL_CURRENT_VERSION >= 2
- info->dl_sap_length = sizeof(uint);
- info->dl_version = DL_CURRENT_VERSION;
-#endif
- qreply(q, reply);
- break;
-
- case DL_ATTACH_REQ:
- if (size < sizeof(dl_attach_req_t))
- goto badprim;
- if (us->state != DL_UNATTACHED || us->ppa != 0) {
- dlpi_error(q, us, DL_ATTACH_REQ, DL_OUTSTATE, 0);
- break;
- }
- for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
- if (ppa->ppa_id == d->attach_req.dl_ppa)
- break;
- if (ppa == 0) {
- dlpi_error(q, us, DL_ATTACH_REQ, DL_BADPPA, 0);
- break;
- }
- us->ppa = ppa;
- qwriter(q, mp, attach_ppa, PERIM_OUTER);
- return;
-
- case DL_DETACH_REQ:
- if (size < sizeof(dl_detach_req_t))
- goto badprim;
- if (us->state != DL_UNBOUND || us->ppa == 0) {
- dlpi_error(q, us, DL_DETACH_REQ, DL_OUTSTATE, 0);
- break;
- }
- qwriter(q, mp, detach_ppa, PERIM_OUTER);
- return;
-
- case DL_BIND_REQ:
- if (size < sizeof(dl_bind_req_t))
- goto badprim;
- if (us->state != DL_UNBOUND || us->ppa == 0) {
- dlpi_error(q, us, DL_BIND_REQ, DL_OUTSTATE, 0);
- break;
- }
-#if 0
- /* apparently this test fails (unnecessarily?) on some systems */
- if (d->bind_req.dl_service_mode != DL_CLDLS) {
- dlpi_error(q, us, DL_BIND_REQ, DL_UNSUPPORTED, 0);
- break;
- }
-#endif
-
- /* saps must be valid PPP network protocol numbers,
- except that we accept ETHERTYPE_IP in place of PPP_IP. */
- sap = d->bind_req.dl_sap;
- us->req_sap = sap;
-
-#if defined(SOL2)
- if (us->flags & US_DBGLOG)
- DPRINT2("DL_BIND_REQ: ip gives sap = 0x%x, us = 0x%x", sap, us);
-
- if (sap == ETHERTYPE_IP) /* normal IFF_IPV4 */
- sap = PPP_IP;
- else if (sap == ETHERTYPE_IPV6) /* when IFF_IPV6 is set */
- sap = PPP_IPV6;
- else if (sap == ETHERTYPE_ALLSAP) /* snoop gives sap of 0 */
- sap = PPP_ALLSAP;
- else {
- DPRINT2("DL_BIND_REQ: unrecognized sap = 0x%x, us = 0x%x", sap, us);
- dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
- break;
- }
-#else
- if (sap == ETHERTYPE_IP)
- sap = PPP_IP;
- if (sap < 0x21 || sap > 0x3fff || (sap & 0x101) != 1) {
- dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
- break;
- }
-#endif /* defined(SOL2) */
-
- /* check that no other stream is bound to this sap already. */
- for (os = us->ppa; os != 0; os = os->next)
- if (os->sap == sap)
- break;
- if (os != 0) {
- dlpi_error(q, us, DL_BIND_REQ, DL_NOADDR, 0);
- break;
- }
-
- us->sap = sap;
- us->state = DL_IDLE;
-
- if ((reply = allocb(sizeof(dl_bind_ack_t) + sizeof(uint),
- BPRI_HI)) == 0)
- break; /* should do bufcall */
- ackp = (dl_bind_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_bind_ack_t) + sizeof(uint);
- reply->b_datap->db_type = M_PCPROTO;
- bzero((caddr_t) ackp, sizeof(dl_bind_ack_t));
- ackp->dl_primitive = DL_BIND_ACK;
- ackp->dl_sap = sap;
- ackp->dl_addr_length = sizeof(uint);
- ackp->dl_addr_offset = sizeof(dl_bind_ack_t);
- *(uint *)(ackp+1) = sap;
- qreply(q, reply);
- break;
-
- case DL_UNBIND_REQ:
- if (size < sizeof(dl_unbind_req_t))
- goto badprim;
- if (us->state != DL_IDLE) {
- dlpi_error(q, us, DL_UNBIND_REQ, DL_OUTSTATE, 0);
- break;
- }
- us->sap = -1;
- us->state = DL_UNBOUND;
-#ifdef LACHTCP
- us->ppa->ifstats.ifs_active = 0;
-#endif
- dlpi_ok(q, DL_UNBIND_REQ);
- break;
-
- case DL_UNITDATA_REQ:
- if (size < sizeof(dl_unitdata_req_t))
- goto badprim;
- if (us->state != DL_IDLE) {
- dlpi_error(q, us, DL_UNITDATA_REQ, DL_OUTSTATE, 0);
- break;
- }
- if ((ppa = us->ppa) == 0) {
- cmn_err(CE_CONT, "ppp: in state dl_idle but ppa == 0?\n");
- break;
- }
- len = mp->b_cont == 0? 0: msgdsize(mp->b_cont);
- if (len > ppa->mtu) {
- DPRINT2("dlpi data too large (%d > %d)\n", len, ppa->mtu);
- break;
- }
-
-#if defined(SOL2)
- /*
- * Should there be any promiscuous stream(s), send the data
- * up for each promiscuous stream that we recognize.
- */
- if (mp->b_cont)
- promisc_sendup(ppa, mp->b_cont, us->sap, 0);
-#endif /* defined(SOL2) */
-
- mp->b_band = 0;
-#ifdef PRIOQ
- /* Extract s_port & d_port from IP-packet, the code is a bit
- dirty here, but so am I, too... */
- if (mp->b_datap->db_type == M_PROTO && us->sap == PPP_IP
- && mp->b_cont != 0) {
- u_char *bb, *tlh;
- int iphlen, len;
- u_short *ptr;
- u_char band_unset, cur_band, syn;
- u_short s_port, d_port;
-
- bb = mp->b_cont->b_rptr; /* bb points to IP-header*/
- len = mp->b_cont->b_wptr - mp->b_cont->b_rptr;
- syn = 0;
- s_port = IPPORT_DEFAULT;
- d_port = IPPORT_DEFAULT;
- if (len >= 20) { /* 20 = minimum length of IP header */
- iphlen = (bb[0] & 0x0f) * 4;
- tlh = bb + iphlen;
- len -= iphlen;
- switch (bb[9]) {
- case IPPROTO_TCP:
- if (len >= 20) { /* min length of TCP header */
- s_port = (tlh[0] << 8) + tlh[1];
- d_port = (tlh[2] << 8) + tlh[3];
- syn = tlh[13] & 0x02;
- }
- break;
- case IPPROTO_UDP:
- if (len >= 8) { /* min length of UDP header */
- s_port = (tlh[0] << 8) + tlh[1];
- d_port = (tlh[2] << 8) + tlh[3];
- }
- break;
- }
- }
-
- /*
- * Now calculate b_band for this packet from the
- * port-priority table.
- */
- ptr = prioq_table;
- cur_band = max_band;
- band_unset = 1;
- while (*ptr) {
- while (*ptr && band_unset)
- if (s_port == *ptr || d_port == *ptr++) {
- mp->b_band = cur_band;
- band_unset = 0;
- break;
- }
- ptr++;
- cur_band--;
- }
- if (band_unset)
- mp->b_band = def_band;
- /* It may be usable to urge SYN packets a bit */
- if (syn)
- mp->b_band++;
- }
-#endif /* PRIOQ */
- /* this assumes PPP_HDRLEN <= sizeof(dl_unitdata_req_t) */
- if (mp->b_datap->db_ref > 1) {
- np = allocb(PPP_HDRLEN, BPRI_HI);
- if (np == 0)
- break; /* gak! */
- np->b_cont = mp->b_cont;
- mp->b_cont = 0;
- freeb(mp);
- mp = np;
- } else
- mp->b_datap->db_type = M_DATA;
- /* XXX should use dl_dest_addr_offset/length here,
- but we would have to translate ETHERTYPE_IP -> PPP_IP */
- mp->b_wptr = mp->b_rptr + PPP_HDRLEN;
- mp->b_rptr[0] = PPP_ALLSTATIONS;
- mp->b_rptr[1] = PPP_UI;
- mp->b_rptr[2] = us->sap >> 8;
- mp->b_rptr[3] = us->sap;
- if (pass_packet(us, mp, 1)) {
- if (!send_data(mp, us))
- putq(q, mp);
- }
- return;
-
-#if DL_CURRENT_VERSION >= 2
- case DL_PHYS_ADDR_REQ:
- if (size < sizeof(dl_phys_addr_req_t))
- goto badprim;
-
- /*
- * Don't check state because ifconfig sends this one down too
- */
-
- if ((reply = allocb(sizeof(dl_phys_addr_ack_t)+ETHERADDRL,
- BPRI_HI)) == 0)
- break; /* should do bufcall */
- reply->b_datap->db_type = M_PCPROTO;
- paddrack = (dl_phys_addr_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_phys_addr_ack_t);
- bzero((caddr_t) paddrack, sizeof(dl_phys_addr_ack_t)+ETHERADDRL);
- paddrack->dl_primitive = DL_PHYS_ADDR_ACK;
- paddrack->dl_addr_length = ETHERADDRL;
- paddrack->dl_addr_offset = sizeof(dl_phys_addr_ack_t);
- bcopy(&eaddr, reply->b_wptr, ETHERADDRL);
- reply->b_wptr += ETHERADDRL;
- qreply(q, reply);
- break;
-
-#if defined(SOL2)
- case DL_PROMISCON_REQ:
- if (size < sizeof(dl_promiscon_req_t))
- goto badprim;
- us->flags |= US_PROMISC;
- dlpi_ok(q, DL_PROMISCON_REQ);
- break;
-
- case DL_PROMISCOFF_REQ:
- if (size < sizeof(dl_promiscoff_req_t))
- goto badprim;
- us->flags &= ~US_PROMISC;
- dlpi_ok(q, DL_PROMISCOFF_REQ);
- break;
-#else
- case DL_PROMISCON_REQ: /* fall thru */
- case DL_PROMISCOFF_REQ: /* fall thru */
-#endif /* defined(SOL2) */
-#endif /* DL_CURRENT_VERSION >= 2 */
-
-#if DL_CURRENT_VERSION >= 2
- case DL_SET_PHYS_ADDR_REQ:
- case DL_SUBS_BIND_REQ:
- case DL_SUBS_UNBIND_REQ:
- case DL_ENABMULTI_REQ:
- case DL_DISABMULTI_REQ:
- case DL_XID_REQ:
- case DL_TEST_REQ:
- case DL_REPLY_UPDATE_REQ:
- case DL_REPLY_REQ:
- case DL_DATA_ACK_REQ:
-#endif
- case DL_CONNECT_REQ:
- case DL_TOKEN_REQ:
- dlpi_error(q, us, d->dl_primitive, DL_NOTSUPPORTED, 0);
- break;
-
- case DL_CONNECT_RES:
- case DL_DISCONNECT_REQ:
- case DL_RESET_REQ:
- case DL_RESET_RES:
- dlpi_error(q, us, d->dl_primitive, DL_OUTSTATE, 0);
- break;
-
- case DL_UDQOS_REQ:
- dlpi_error(q, us, d->dl_primitive, DL_BADQOSTYPE, 0);
- break;
-
-#if DL_CURRENT_VERSION >= 2
- case DL_TEST_RES:
- case DL_XID_RES:
- break;
-#endif
-
- default:
- cmn_err(CE_CONT, "ppp: unknown dlpi prim 0x%x\n", d->dl_primitive);
- /* fall through */
- badprim:
- dlpi_error(q, us, d->dl_primitive, DL_BADPRIM, 0);
- break;
- }
- freemsg(mp);
-}
-
-static void
-dlpi_error(q, us, prim, err, uerr)
- queue_t *q;
- upperstr_t *us;
- int prim, err, uerr;
-{
- mblk_t *reply;
- dl_error_ack_t *errp;
-
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: dlpi error, prim=%x, err=%x\n", us->mn, prim, err);
- reply = allocb(sizeof(dl_error_ack_t), BPRI_HI);
- if (reply == 0)
- return; /* XXX should do bufcall */
- reply->b_datap->db_type = M_PCPROTO;
- errp = (dl_error_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_error_ack_t);
- errp->dl_primitive = DL_ERROR_ACK;
- errp->dl_error_primitive = prim;
- errp->dl_errno = err;
- errp->dl_unix_errno = uerr;
- qreply(q, reply);
-}
-
-static void
-dlpi_ok(q, prim)
- queue_t *q;
- int prim;
-{
- mblk_t *reply;
- dl_ok_ack_t *okp;
-
- reply = allocb(sizeof(dl_ok_ack_t), BPRI_HI);
- if (reply == 0)
- return; /* XXX should do bufcall */
- reply->b_datap->db_type = M_PCPROTO;
- okp = (dl_ok_ack_t *) reply->b_wptr;
- reply->b_wptr += sizeof(dl_ok_ack_t);
- okp->dl_primitive = DL_OK_ACK;
- okp->dl_correct_primitive = prim;
- qreply(q, reply);
-}
-#endif /* NO_DLPI */
-
-static int
-pass_packet(us, mp, outbound)
- upperstr_t *us;
- mblk_t *mp;
- int outbound;
-{
- int pass;
- upperstr_t *ppa;
-
- if ((ppa = us->ppa) == 0) {
- freemsg(mp);
- return 0;
- }
-
-#ifdef FILTER_PACKETS
- pass = ip_hard_filter(us, mp, outbound);
-#else
- /*
- * Here is where we might, in future, decide whether to pass
- * or drop the packet, and whether it counts as link activity.
- */
- pass = 1;
-#endif /* FILTER_PACKETS */
-
- if (pass < 0) {
- /* pass only if link already up, and don't update time */
- if (ppa->lowerq == 0) {
- freemsg(mp);
- return 0;
- }
- pass = 1;
- } else if (pass) {
- if (outbound)
- ppa->last_sent = time;
- else
- ppa->last_recv = time;
- }
-
- return pass;
-}
-
-/*
- * We have some data to send down to the lower stream (or up the
- * control stream, if we don't have a lower stream attached).
- * Returns 1 if the message was dealt with, 0 if it wasn't able
- * to be sent on and should therefore be queued up.
- */
-static int
-send_data(mp, us)
- mblk_t *mp;
- upperstr_t *us;
-{
- upperstr_t *ppa;
-
- if ((us->flags & US_BLOCKED) || us->npmode == NPMODE_QUEUE)
- return 0;
- ppa = us->ppa;
- if (ppa == 0 || us->npmode == NPMODE_DROP || us->npmode == NPMODE_ERROR) {
- if (us->flags & US_DBGLOG)
- DPRINT2("ppp/%d: dropping pkt (npmode=%d)\n", us->mn, us->npmode);
- freemsg(mp);
- return 1;
- }
- if (ppa->lowerq == 0) {
- /* try to send it up the control stream */
- if (bcanputnext(ppa->q, mp->b_band)) {
- /*
- * The message seems to get corrupted for some reason if
- * we just send the message up as it is, so we send a copy.
- */
- mblk_t *np = copymsg(mp);
- freemsg(mp);
- if (np != 0)
- putnext(ppa->q, np);
- return 1;
- }
- } else {
- if (bcanputnext(ppa->lowerq, mp->b_band)) {
- MT_ENTER(&ppa->stats_lock);
- ppa->stats.ppp_opackets++;
- ppa->stats.ppp_obytes += msgdsize(mp);
-#ifdef INCR_OPACKETS
- INCR_OPACKETS(ppa);
-#endif
- MT_EXIT(&ppa->stats_lock);
- /*
- * The lower queue is only ever detached while holding an
- * exclusive lock on the whole driver. So we can be confident
- * that the lower queue is still there.
- */
- putnext(ppa->lowerq, mp);
- return 1;
- }
- }
- us->flags |= US_BLOCKED;
- return 0;
-}
-
-/*
- * Allocate a new PPA id and link this stream into the list of PPAs.
- * This procedure is called with an exclusive lock on all queues in
- * this driver.
- */
-static void
-new_ppa(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us, *up, **usp;
- int ppa_id;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("new_ppa: q_ptr = 0!\n");
- return;
- }
-
- usp = &ppas;
- ppa_id = 0;
- while ((up = *usp) != 0 && ppa_id == up->ppa_id) {
- ++ppa_id;
- usp = &up->nextppa;
- }
- us->ppa_id = ppa_id;
- us->ppa = us;
- us->next = 0;
- us->nextppa = *usp;
- *usp = us;
- us->flags |= US_CONTROL;
- us->npmode = NPMODE_PASS;
-
- us->mtu = PPP_MTU;
- us->mru = PPP_MRU;
-
-#ifdef SOL2
- /*
- * Create a kstats record for our statistics, so netstat -i works.
- */
- if (us->kstats == 0) {
- char unit[32];
-
- sprintf(unit, "ppp%d", us->ppa->ppa_id);
- us->kstats = kstat_create("ppp", us->ppa->ppa_id, unit,
- "net", KSTAT_TYPE_NAMED, 4, 0);
- if (us->kstats != 0) {
- kstat_named_t *kn = KSTAT_NAMED_PTR(us->kstats);
-
- strcpy(kn[0].name, "ipackets");
- kn[0].data_type = KSTAT_DATA_ULONG;
- strcpy(kn[1].name, "ierrors");
- kn[1].data_type = KSTAT_DATA_ULONG;
- strcpy(kn[2].name, "opackets");
- kn[2].data_type = KSTAT_DATA_ULONG;
- strcpy(kn[3].name, "oerrors");
- kn[3].data_type = KSTAT_DATA_ULONG;
- kstat_install(us->kstats);
- }
- }
-#endif /* SOL2 */
-
- *(int *)mp->b_cont->b_rptr = ppa_id;
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
-}
-
-static void
-attach_ppa(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us, *t;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("attach_ppa: q_ptr = 0!\n");
- return;
- }
-
-#ifndef NO_DLPI
- us->state = DL_UNBOUND;
-#endif
- for (t = us->ppa; t->next != 0; t = t->next)
- ;
- t->next = us;
- us->next = 0;
- if (mp->b_datap->db_type == M_IOCTL) {
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
- } else {
-#ifndef NO_DLPI
- dlpi_ok(q, DL_ATTACH_REQ);
-#endif
- }
-}
-
-static void
-detach_ppa(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us, *t;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("detach_ppa: q_ptr = 0!\n");
- return;
- }
-
- for (t = us->ppa; t->next != 0; t = t->next)
- if (t->next == us) {
- t->next = us->next;
- break;
- }
- us->next = 0;
- us->ppa = 0;
-#ifndef NO_DLPI
- us->state = DL_UNATTACHED;
- dlpi_ok(q, DL_DETACH_REQ);
-#endif
-}
-
-/*
- * We call this with qwriter in order to give the upper queue procedures
- * the guarantee that the lower queue is not going to go away while
- * they are executing.
- */
-static void
-detach_lower(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("detach_lower: q_ptr = 0!\n");
- return;
- }
-
- LOCK_LOWER_W;
- us->lowerq->q_ptr = 0;
- RD(us->lowerq)->q_ptr = 0;
- us->lowerq = 0;
- UNLOCK_LOWER;
-
- /* Unblock streams which now feed back up the control stream. */
- qenable(us->q);
-
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
-}
-
-static int
-pppuwsrv(q)
- queue_t *q;
-{
- upperstr_t *us, *as;
- mblk_t *mp;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("pppuwsrv: q_ptr = 0!\n");
- return 0;
- }
-
- /*
- * If this is a control stream, then this service procedure
- * probably got enabled because of flow control in the lower
- * stream being enabled (or because of the lower stream going
- * away). Therefore we enable the service procedure of all
- * attached upper streams.
- */
- if (us->flags & US_CONTROL) {
- for (as = us->next; as != 0; as = as->next)
- qenable(WR(as->q));
- }
-
- /* Try to send on any data queued here. */
- us->flags &= ~US_BLOCKED;
- while ((mp = getq(q)) != 0) {
- if (!send_data(mp, us)) {
- putbq(q, mp);
- break;
- }
- }
-
- return 0;
-}
-
-/* should never get called... */
-static int
-ppplwput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- putnext(q, mp);
- return 0;
-}
-
-static int
-ppplwsrv(q)
- queue_t *q;
-{
- queue_t *uq;
-
- /*
- * Flow control has back-enabled this stream:
- * enable the upper write service procedure for
- * the upper control stream for this lower stream.
- */
- LOCK_LOWER_R;
- uq = (queue_t *) q->q_ptr;
- if (uq != 0)
- qenable(uq);
- UNLOCK_LOWER;
- return 0;
-}
-
-/*
- * This should only get called for control streams.
- */
-static int
-pppurput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *ppa, *us;
- int proto, len;
- struct iocblk *iop;
-
- ppa = (upperstr_t *) q->q_ptr;
- if (ppa == 0) {
- DPRINT("pppurput: q_ptr = 0!\n");
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
- case M_CTL:
- MT_ENTER(&ppa->stats_lock);
- switch (*mp->b_rptr) {
- case PPPCTL_IERROR:
-#ifdef INCR_IERRORS
- INCR_IERRORS(ppa);
-#endif
- ppa->stats.ppp_ierrors++;
- break;
- case PPPCTL_OERROR:
-#ifdef INCR_OERRORS
- INCR_OERRORS(ppa);
-#endif
- ppa->stats.ppp_oerrors++;
- break;
- }
- MT_EXIT(&ppa->stats_lock);
- freemsg(mp);
- break;
-
- case M_IOCACK:
- case M_IOCNAK:
- /*
- * Attempt to match up the response with the stream
- * that the request came from.
- */
- iop = (struct iocblk *) mp->b_rptr;
- for (us = ppa; us != 0; us = us->next)
- if (us->ioc_id == iop->ioc_id)
- break;
- if (us == 0)
- freemsg(mp);
- else
- putnext(us->q, mp);
- break;
-
- case M_HANGUP:
- /*
- * The serial device has hung up. We don't want to send
- * the M_HANGUP message up to pppd because that will stop
- * us from using the control stream any more. Instead we
- * send a zero-length message as an end-of-file indication.
- */
- freemsg(mp);
- mp = allocb(1, BPRI_HI);
- if (mp == 0) {
- DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn);
- break;
- }
- putnext(ppa->q, mp);
- break;
-
- default:
- if (mp->b_datap->db_type == M_DATA) {
- len = msgdsize(mp);
- if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) {
- PULLUP(mp, PPP_HDRLEN);
- if (mp == 0) {
- DPRINT1("ppp_urput: msgpullup failed (len=%d)\n", len);
- break;
- }
- }
- MT_ENTER(&ppa->stats_lock);
- ppa->stats.ppp_ipackets++;
- ppa->stats.ppp_ibytes += len;
-#ifdef INCR_IPACKETS
- INCR_IPACKETS(ppa);
-#endif
- MT_EXIT(&ppa->stats_lock);
-
- proto = PPP_PROTOCOL(mp->b_rptr);
-
-#if defined(SOL2)
- /*
- * Should there be any promiscuous stream(s), send the data
- * up for each promiscuous stream that we recognize.
- */
- promisc_sendup(ppa, mp, proto, 1);
-#endif /* defined(SOL2) */
-
- if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) {
- /*
- * A data packet for some network protocol.
- * Queue it on the upper stream for that protocol.
- * XXX could we just putnext it? (would require thought)
- * The rblocked flag is there to ensure that we keep
- * messages in order for each network protocol.
- */
- if (!pass_packet(us, mp, 0))
- break;
- if (!us->rblocked && !canput(us->q))
- us->rblocked = 1;
- if (!us->rblocked)
- putq(us->q, mp);
- else
- putq(q, mp);
- break;
- }
- }
- /*
- * A control frame, a frame for an unknown protocol,
- * or some other message type.
- * Send it up to pppd via the control stream.
- */
- if (queclass(mp) == QPCTL || canputnext(ppa->q))
- putnext(ppa->q, mp);
- else
- putq(q, mp);
- break;
- }
-
- return 0;
-}
-
-static int
-pppursrv(q)
- queue_t *q;
-{
- upperstr_t *us, *as;
- mblk_t *mp, *hdr;
-#ifndef NO_DLPI
- dl_unitdata_ind_t *ud;
-#endif
- int proto;
-
- us = (upperstr_t *) q->q_ptr;
- if (us == 0) {
- DPRINT("pppursrv: q_ptr = 0!\n");
- return 0;
- }
-
- if (us->flags & US_CONTROL) {
- /*
- * A control stream.
- * If there is no lower queue attached, run the write service
- * routines of other upper streams attached to this PPA.
- */
- if (us->lowerq == 0) {
- as = us;
- do {
- if (as->flags & US_BLOCKED)
- qenable(WR(as->q));
- as = as->next;
- } while (as != 0);
- }
-
- /*
- * Messages get queued on this stream's read queue if they
- * can't be queued on the read queue of the attached stream
- * that they are destined for. This is for flow control -
- * when this queue fills up, the lower read put procedure will
- * queue messages there and the flow control will propagate
- * down from there.
- */
- while ((mp = getq(q)) != 0) {
- proto = PPP_PROTOCOL(mp->b_rptr);
- if (proto < 0x8000 && (as = find_dest(us, proto)) != 0) {
- if (!canput(as->q))
- break;
- putq(as->q, mp);
- } else {
- if (!canputnext(q))
- break;
- putnext(q, mp);
- }
- }
- if (mp) {
- putbq(q, mp);
- } else {
- /* can now put stuff directly on network protocol streams again */
- for (as = us->next; as != 0; as = as->next)
- as->rblocked = 0;
- }
-
- /*
- * If this stream has a lower stream attached,
- * enable the read queue's service routine.
- * XXX we should really only do this if the queue length
- * has dropped below the low-water mark.
- */
- if (us->lowerq != 0)
- qenable(RD(us->lowerq));
-
- } else {
- /*
- * A network protocol stream. Put a DLPI header on each
- * packet and send it on.
- * (Actually, it seems that the IP module will happily
- * accept M_DATA messages without the DL_UNITDATA_IND header.)
- */
- while ((mp = getq(q)) != 0) {
- if (!canputnext(q)) {
- putbq(q, mp);
- break;
- }
-#ifndef NO_DLPI
- proto = PPP_PROTOCOL(mp->b_rptr);
- mp->b_rptr += PPP_HDRLEN;
- hdr = allocb(sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint),
- BPRI_MED);
- if (hdr == 0) {
- /* XXX should put it back and use bufcall */
- freemsg(mp);
- continue;
- }
- hdr->b_datap->db_type = M_PROTO;
- ud = (dl_unitdata_ind_t *) hdr->b_wptr;
- hdr->b_wptr += sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint);
- hdr->b_cont = mp;
- ud->dl_primitive = DL_UNITDATA_IND;
- ud->dl_dest_addr_length = sizeof(uint);
- ud->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
- ud->dl_src_addr_length = sizeof(uint);
- ud->dl_src_addr_offset = ud->dl_dest_addr_offset + sizeof(uint);
-#if DL_CURRENT_VERSION >= 2
- ud->dl_group_address = 0;
-#endif
- /* Send the DLPI client the data with the SAP they requested,
- (e.g. ETHERTYPE_IP) rather than the PPP protocol number
- (e.g. PPP_IP) */
- ((uint *)(ud + 1))[0] = us->req_sap; /* dest SAP */
- ((uint *)(ud + 1))[1] = us->req_sap; /* src SAP */
- putnext(q, hdr);
-#else /* NO_DLPI */
- putnext(q, mp);
-#endif /* NO_DLPI */
- }
- /*
- * Now that we have consumed some packets from this queue,
- * enable the control stream's read service routine so that we
- * can process any packets for us that might have got queued
- * there for flow control reasons.
- */
- if (us->ppa)
- qenable(us->ppa->q);
- }
-
- return 0;
-}
-
-static upperstr_t *
-find_dest(ppa, proto)
- upperstr_t *ppa;
- int proto;
-{
- upperstr_t *us;
-
- for (us = ppa->next; us != 0; us = us->next)
- if (proto == us->sap)
- break;
- return us;
-}
-
-#if defined (SOL2)
-/*
- * Test upstream promiscuous conditions. As of now, only pass IPv4 and
- * Ipv6 packets upstream (let PPP packets be decoded elsewhere).
- */
-static upperstr_t *
-find_promisc(us, proto)
- upperstr_t *us;
- int proto;
-{
-
- if ((proto != PPP_IP) && (proto != PPP_IPV6))
- return (upperstr_t *)0;
-
- for ( ; us; us = us->next) {
- if ((us->flags & US_PROMISC) && (us->state == DL_IDLE))
- return us;
- }
-
- return (upperstr_t *)0;
-}
-
-/*
- * Prepend an empty Ethernet header to msg for snoop, et al.
- */
-static mblk_t *
-prepend_ether(us, mp, proto)
- upperstr_t *us;
- mblk_t *mp;
- int proto;
-{
- mblk_t *eh;
- int type;
-
- if ((eh = allocb(sizeof(struct ether_header), BPRI_HI)) == 0) {
- freemsg(mp);
- return (mblk_t *)0;
- }
-
- if (proto == PPP_IP)
- type = ETHERTYPE_IP;
- else if (proto == PPP_IPV6)
- type = ETHERTYPE_IPV6;
- else
- type = proto; /* What else? Let decoder decide */
-
- eh->b_wptr += sizeof(struct ether_header);
- bzero((caddr_t)eh->b_rptr, sizeof(struct ether_header));
- ((struct ether_header *)eh->b_rptr)->ether_type = htons((short)type);
- eh->b_cont = mp;
- return (eh);
-}
-
-/*
- * Prepend DL_UNITDATA_IND mblk to msg
- */
-static mblk_t *
-prepend_udind(us, mp, proto)
- upperstr_t *us;
- mblk_t *mp;
- int proto;
-{
- dl_unitdata_ind_t *dlu;
- mblk_t *dh;
- size_t size;
-
- size = sizeof(dl_unitdata_ind_t);
- if ((dh = allocb(size, BPRI_MED)) == 0) {
- freemsg(mp);
- return (mblk_t *)0;
- }
-
- dh->b_datap->db_type = M_PROTO;
- dh->b_wptr = dh->b_datap->db_lim;
- dh->b_rptr = dh->b_wptr - size;
-
- dlu = (dl_unitdata_ind_t *)dh->b_rptr;
- dlu->dl_primitive = DL_UNITDATA_IND;
- dlu->dl_dest_addr_length = 0;
- dlu->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
- dlu->dl_src_addr_length = 0;
- dlu->dl_src_addr_offset = sizeof(dl_unitdata_ind_t);
- dlu->dl_group_address = 0;
-
- dh->b_cont = mp;
- return (dh);
-}
-
-/*
- * For any recognized promiscuous streams, send data upstream
- */
-static void
-promisc_sendup(ppa, mp, proto, skip)
- upperstr_t *ppa;
- mblk_t *mp;
- int proto, skip;
-{
- mblk_t *dup_mp, *dup_dup_mp;
- upperstr_t *prus, *nprus;
-
- if ((prus = find_promisc(ppa, proto)) != 0) {
- if (dup_mp = dupmsg(mp)) {
-
- if (skip)
- dup_mp->b_rptr += PPP_HDRLEN;
-
- for ( ; nprus = find_promisc(prus->next, proto);
- prus = nprus) {
-
- if (dup_dup_mp = dupmsg(dup_mp)) {
- if (canputnext(prus->q)) {
- if (prus->flags & US_RAWDATA) {
- dup_dup_mp = prepend_ether(prus, dup_dup_mp, proto);
- putnext(prus->q, dup_dup_mp);
- } else {
- dup_dup_mp = prepend_udind(prus, dup_dup_mp, proto);
- putnext(prus->q, dup_dup_mp);
- }
- } else {
- DPRINT("ppp_urput: data to promisc q dropped\n");
- freemsg(dup_dup_mp);
- }
- }
- }
-
- if (canputnext(prus->q)) {
- if (prus->flags & US_RAWDATA) {
- dup_mp = prepend_ether(prus, dup_mp, proto);
- putnext(prus->q, dup_mp);
- } else {
- dup_mp = prepend_udind(prus, dup_mp, proto);
- putnext(prus->q, dup_mp);
- }
- } else {
- DPRINT("ppp_urput: data to promisc q dropped\n");
- freemsg(dup_mp);
- }
- }
- }
-}
-#endif /* defined(SOL2) */
-
-/*
- * We simply put the message on to the associated upper control stream
- * (either here or in ppplrsrv). That way we enter the perimeters
- * before looking through the list of attached streams to decide which
- * stream it should go up.
- */
-static int
-ppplrput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- queue_t *uq;
- struct iocblk *iop;
-
- switch (mp->b_datap->db_type) {
- case M_IOCTL:
- iop = (struct iocblk *) mp->b_rptr;
- iop->ioc_error = EINVAL;
- mp->b_datap->db_type = M_IOCNAK;
- qreply(q, mp);
- return 0;
- case M_FLUSH:
- if (*mp->b_rptr & FLUSHR)
- flushq(q, FLUSHDATA);
- if (*mp->b_rptr & FLUSHW) {
- *mp->b_rptr &= ~FLUSHR;
- qreply(q, mp);
- } else
- freemsg(mp);
- return 0;
- }
-
- /*
- * If we can't get the lower lock straight away, queue this one
- * rather than blocking, to avoid the possibility of deadlock.
- */
- if (!TRYLOCK_LOWER_R) {
- putq(q, mp);
- return 0;
- }
-
- /*
- * Check that we're still connected to the driver.
- */
- uq = (queue_t *) q->q_ptr;
- if (uq == 0) {
- UNLOCK_LOWER;
- DPRINT1("ppplrput: q = %x, uq = 0??\n", q);
- freemsg(mp);
- return 0;
- }
-
- /*
- * Try to forward the message to the put routine for the upper
- * control stream for this lower stream.
- * If there are already messages queued here, queue this one so
- * they don't get out of order.
- */
- if (queclass(mp) == QPCTL || (qsize(q) == 0 && canput(uq)))
- put(uq, mp);
- else
- putq(q, mp);
-
- UNLOCK_LOWER;
- return 0;
-}
-
-static int
-ppplrsrv(q)
- queue_t *q;
-{
- mblk_t *mp;
- queue_t *uq;
-
- /*
- * Packets get queued here for flow control reasons
- * or if the lrput routine couldn't get the lower lock
- * without blocking.
- */
- LOCK_LOWER_R;
- uq = (queue_t *) q->q_ptr;
- if (uq == 0) {
- UNLOCK_LOWER;
- flushq(q, FLUSHALL);
- DPRINT1("ppplrsrv: q = %x, uq = 0??\n", q);
- return 0;
- }
- while ((mp = getq(q)) != 0) {
- if (queclass(mp) == QPCTL || canput(uq))
- put(uq, mp);
- else {
- putbq(q, mp);
- break;
- }
- }
- UNLOCK_LOWER;
- return 0;
-}
-
-static int
-putctl2(q, type, code, val)
- queue_t *q;
- int type, code, val;
-{
- mblk_t *mp;
-
- mp = allocb(2, BPRI_HI);
- if (mp == 0)
- return 0;
- mp->b_datap->db_type = type;
- mp->b_wptr[0] = code;
- mp->b_wptr[1] = val;
- mp->b_wptr += 2;
- putnext(q, mp);
- return 1;
-}
-
-static int
-putctl4(q, type, code, val)
- queue_t *q;
- int type, code, val;
-{
- mblk_t *mp;
-
- mp = allocb(4, BPRI_HI);
- if (mp == 0)
- return 0;
- mp->b_datap->db_type = type;
- mp->b_wptr[0] = code;
- ((short *)mp->b_wptr)[1] = val;
- mp->b_wptr += 4;
- putnext(q, mp);
- return 1;
-}
-
-static void
-debug_dump(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- upperstr_t *us;
- queue_t *uq, *lq;
-
- DPRINT("ppp upper streams:\n");
- for (us = minor_devs; us != 0; us = us->nextmn) {
- uq = us->q;
- DPRINT3(" %d: q=%x rlev=%d",
- us->mn, uq, (uq? qsize(uq): 0));
- DPRINT3(" wlev=%d flags=0x%b", (uq? qsize(WR(uq)): 0),
- us->flags, "\020\1priv\2control\3blocked\4last");
- DPRINT3(" state=%x sap=%x req_sap=%x", us->state, us->sap,
- us->req_sap);
- if (us->ppa == 0)
- DPRINT(" ppa=?\n");
- else
- DPRINT1(" ppa=%d\n", us->ppa->ppa_id);
- if (us->flags & US_CONTROL) {
- lq = us->lowerq;
- DPRINT3(" control for %d lq=%x rlev=%d",
- us->ppa_id, lq, (lq? qsize(RD(lq)): 0));
- DPRINT3(" wlev=%d mru=%d mtu=%d\n",
- (lq? qsize(lq): 0), us->mru, us->mtu);
- }
- }
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
-}
-
-#ifdef FILTER_PACKETS
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-#include <netinet/tcp.h>
-
-#define MAX_IPHDR 128 /* max TCP/IP header size */
-
-
-/* The following table contains a hard-coded list of protocol/port pairs.
- * Any matching packets are either discarded unconditionally, or,
- * if ok_if_link_up is non-zero when a connection does not currently exist
- * (i.e., they go through if the connection is present, but never initiate
- * a dial-out).
- * This idea came from a post by dm@garage.uun.org (David Mazieres)
- */
-static struct pktfilt_tab {
- int proto;
- u_short port;
- u_short ok_if_link_up;
-} pktfilt_tab[] = {
- { IPPROTO_UDP, 520, 1 }, /* RIP, ok to pass if link is up */
- { IPPROTO_UDP, 123, 1 }, /* NTP, don't keep up the link for it */
- { -1, 0, 0 } /* terminator entry has port == -1 */
-};
-
-
-static int
-ip_hard_filter(us, mp, outbound)
- upperstr_t *us;
- mblk_t *mp;
- int outbound;
-{
- struct ip *ip;
- struct pktfilt_tab *pft;
- mblk_t *temp_mp;
- int proto;
- int len, hlen;
-
-
- /* Note, the PPP header has already been pulled up in all cases */
- proto = PPP_PROTOCOL(mp->b_rptr);
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: filter, proto=0x%x, out=%d\n", us->mn, proto, outbound);
-
- switch (proto)
- {
- case PPP_IP:
- if ((mp->b_wptr - mp->b_rptr) == PPP_HDRLEN && mp->b_cont != 0) {
- temp_mp = mp->b_cont;
- len = msgdsize(temp_mp);
- hlen = (len < MAX_IPHDR) ? len : MAX_IPHDR;
- PULLUP(temp_mp, hlen);
- if (temp_mp == 0) {
- DPRINT2("ppp/%d: filter, pullup next failed, len=%d\n",
- us->mn, hlen);
- mp->b_cont = 0; /* PULLUP() freed the rest */
- freemsg(mp);
- return 0;
- }
- ip = (struct ip *)mp->b_cont->b_rptr;
- }
- else {
- len = msgdsize(mp);
- hlen = (len < (PPP_HDRLEN+MAX_IPHDR)) ? len : (PPP_HDRLEN+MAX_IPHDR);
- PULLUP(mp, hlen);
- if (mp == 0) {
- DPRINT2("ppp/%d: filter, pullup failed, len=%d\n",
- us->mn, hlen);
- return 0;
- }
- ip = (struct ip *)(mp->b_rptr + PPP_HDRLEN);
- }
-
- /* For IP traffic, certain packets (e.g., RIP) may be either
- * 1. ignored - dropped completely
- * 2. will not initiate a connection, but
- * will be passed if a connection is currently up.
- */
- for (pft=pktfilt_tab; pft->proto != -1; pft++) {
- if (ip->ip_p == pft->proto) {
- switch(pft->proto) {
- case IPPROTO_UDP:
- if (((struct udphdr *) &((int *)ip)[ip->ip_hl])->uh_dport
- == htons(pft->port)) goto endfor;
- break;
- case IPPROTO_TCP:
- if (((struct tcphdr *) &((int *)ip)[ip->ip_hl])->th_dport
- == htons(pft->port)) goto endfor;
- break;
- }
- }
- }
- endfor:
- if (pft->proto != -1) {
- if (us->flags & US_DBGLOG)
- DPRINT3("ppp/%d: found IP pkt, proto=0x%x (%d)\n",
- us->mn, pft->proto, pft->port);
- /* Discard if not connected, or if not pass_with_link_up */
- /* else, if link is up let go by, but don't update time */
- return pft->ok_if_link_up? -1: 0;
- }
- break;
- } /* end switch (proto) */
-
- return 1;
-}
-#endif /* FILTER_PACKETS */
-
diff --git a/mdk-stage1/ppp/solaris/ppp.conf b/mdk-stage1/ppp/solaris/ppp.conf
deleted file mode 100644
index e443a7aac..000000000
--- a/mdk-stage1/ppp/solaris/ppp.conf
+++ /dev/null
@@ -1 +0,0 @@
-name="ppp" parent="pseudo" instance=0;
diff --git a/mdk-stage1/ppp/solaris/ppp_ahdlc.c b/mdk-stage1/ppp/solaris/ppp_ahdlc.c
deleted file mode 100644
index d0b961258..000000000
--- a/mdk-stage1/ppp/solaris/ppp_ahdlc.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/*
- * ppp_ahdlc.c - STREAMS module for doing PPP asynchronous HDLC.
- *
- * Re-written by Adi Masputra <adi.masputra@sun.com>, based on
- * the original ppp_ahdlc.c
- *
- * Copyright (c) 2000 by Sun Microsystems, Inc.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.
- *
- * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF
- * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
- * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE, OR NON-INFRINGEMENT. SUN SHALL NOT BE LIABLE FOR
- * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
- * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stream.h>
-#include <sys/errno.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/kmem.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Right now, mutex is only enabled for Solaris 2.x
- */
-#if defined(SOL2)
-#define USE_MUTEX
-#endif /* SOL2 */
-
-/*
- * intpointer_t and uintpointer_t are signed and unsigned integer types
- * large enough to hold any data pointer; that is, data pointers can be
- * assigned into or from these integer types without losing precision.
- * On recent Solaris releases, these types are defined in sys/int_types.h,
- * but not on SunOS 4.x or the earlier Solaris versions.
- */
-#if defined(_LP64) || defined(_I32LPx)
-typedef long intpointer_t;
-typedef unsigned long uintpointer_t;
-#else
-typedef int intpointer_t;
-typedef unsigned int uintpointer_t;
-#endif
-
-MOD_OPEN_DECL(ahdlc_open);
-MOD_CLOSE_DECL(ahdlc_close);
-static int ahdlc_wput __P((queue_t *, mblk_t *));
-static int ahdlc_rput __P((queue_t *, mblk_t *));
-static void ahdlc_encode __P((queue_t *, mblk_t *));
-static void ahdlc_decode __P((queue_t *, mblk_t *));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-#if defined(SOL2)
-/*
- * Don't send HDLC start flag is last transmit is within 1.5 seconds -
- * FLAG_TIME is defined is microseconds
- */
-#define FLAG_TIME 1500
-#define ABS(x) (x >= 0 ? x : (-x))
-#endif /* SOL2 */
-
-/*
- * Extract byte i of message mp
- */
-#define MSG_BYTE(mp, i) ((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
- msg_byte((mp), (i)))
-
-/*
- * Is this LCP packet one we have to transmit using LCP defaults?
- */
-#define LCP_USE_DFLT(mp) (1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-/*
- * Standard STREAMS declarations
- */
-static struct module_info minfo = {
- 0x7d23, "ppp_ahdl", 0, INFPSZ, 32768, 512
-};
-
-static struct qinit rinit = {
- ahdlc_rput, NULL, ahdlc_open, ahdlc_close, NULL, &minfo, NULL
-};
-
-static struct qinit winit = {
- ahdlc_wput, NULL, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int phdldevflag = 0;
-#define ppp_ahdlcinfo phdlinfo
-#endif /* defined(SVR4) && !defined(SOL2) */
-
-struct streamtab ppp_ahdlcinfo = {
- &rinit, /* ptr to st_rdinit */
- &winit, /* ptr to st_wrinit */
- NULL, /* ptr to st_muxrinit */
- NULL, /* ptr to st_muxwinit */
-#if defined(SUNOS4)
- NULL /* ptr to ptr to st_modlist */
-#endif /* SUNOS4 */
-};
-
-#if defined(SUNOS4)
-int ppp_ahdlc_count = 0; /* open counter */
-#endif /* SUNOS4 */
-
-/*
- * Per-stream state structure
- */
-typedef struct ahdlc_state {
-#if defined(USE_MUTEX)
- kmutex_t lock; /* lock for this structure */
-#endif /* USE_MUTEX */
- int flags; /* link flags */
- mblk_t *rx_buf; /* ptr to receive buffer */
- int rx_buf_size; /* receive buffer size */
- ushort_t infcs; /* calculated rx HDLC FCS */
- u_int32_t xaccm[8]; /* 256-bit xmit ACCM */
- u_int32_t raccm; /* 32-bit rcv ACCM */
- int mtu; /* interface MTU */
- int mru; /* link MRU */
- int unit; /* current PPP unit number */
- struct pppstat stats; /* statistic structure */
-#if defined(SOL2)
- clock_t flag_time; /* time in usec between flags */
- clock_t lbolt; /* last updated lbolt */
-#endif /* SOL2 */
-} ahdlc_state_t;
-
-/*
- * Values for flags
- */
-#define ESCAPED 0x100 /* last saw escape char on input */
-#define IFLUSH 0x200 /* flushing input due to error */
-
-/*
- * RCV_B7_1, etc., defined in net/pppio.h, are stored in flags also.
- */
-#define RCV_FLAGS (RCV_B7_1|RCV_B7_0|RCV_ODDP|RCV_EVNP)
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
- 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
- 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
- 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
- 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
- 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
- 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
- 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
- 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
- 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
- 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
- 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
- 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
- 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
- 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
- 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
- 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
- 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
- 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
- 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
- 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
- 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
- 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
- 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
- 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
- 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
- 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
- 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
- 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
- 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
- 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
- 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
- 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-static u_int32_t paritytab[8] =
-{
- 0x96696996, 0x69969669, 0x69969669, 0x96696996,
- 0x69969669, 0x96696996, 0x96696996, 0x69969669
-};
-
-/*
- * STREAMS module open (entry) point
- */
-MOD_OPEN(ahdlc_open)
-{
- ahdlc_state_t *state;
-
- /*
- * Return if it's already opened
- */
- if (q->q_ptr) {
- return 0;
- }
-
- /*
- * This can only be opened as a module
- */
- if (sflag != MODOPEN) {
- return 0;
- }
-
- state = (ahdlc_state_t *) ALLOC_NOSLEEP(sizeof(ahdlc_state_t));
- if (state == 0)
- OPEN_ERROR(ENOSR);
- bzero((caddr_t) state, sizeof(ahdlc_state_t));
-
- q->q_ptr = (caddr_t) state;
- WR(q)->q_ptr = (caddr_t) state;
-
-#if defined(USE_MUTEX)
- mutex_init(&state->lock, NULL, MUTEX_DEFAULT, NULL);
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
- state->xaccm[0] = ~0; /* escape 0x00 through 0x1f */
- state->xaccm[3] = 0x60000000; /* escape 0x7d and 0x7e */
- state->mru = PPP_MRU; /* default of 1500 bytes */
-#if defined(SOL2)
- state->flag_time = drv_usectohz(FLAG_TIME);
-#endif /* SOL2 */
-
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-
-#if defined(SUNOS4)
- ppp_ahdlc_count++;
-#endif /* SUNOS4 */
-
- qprocson(q);
-
- return 0;
-}
-
-/*
- * STREAMS module close (exit) point
- */
-MOD_CLOSE(ahdlc_close)
-{
- ahdlc_state_t *state;
-
- qprocsoff(q);
-
- state = (ahdlc_state_t *) q->q_ptr;
-
- if (state == 0) {
- DPRINT("state == 0 in ahdlc_close\n");
- return 0;
- }
-
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
- if (state->rx_buf != 0) {
- freemsg(state->rx_buf);
- state->rx_buf = 0;
- }
-
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
- mutex_destroy(&state->lock);
-#endif /* USE_MUTEX */
-
- FREE(q->q_ptr, sizeof(ahdlc_state_t));
- q->q_ptr = NULL;
- OTHERQ(q)->q_ptr = NULL;
-
-#if defined(SUNOS4)
- if (ppp_ahdlc_count)
- ppp_ahdlc_count--;
-#endif /* SUNOS4 */
-
- return 0;
-}
-
-/*
- * Write side put routine
- */
-static int
-ahdlc_wput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- ahdlc_state_t *state;
- struct iocblk *iop;
- int error;
- mblk_t *np;
- struct ppp_stats *psp;
-
- state = (ahdlc_state_t *) q->q_ptr;
- if (state == 0) {
- DPRINT("state == 0 in ahdlc_wput\n");
- freemsg(mp);
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
- case M_DATA:
- /*
- * A data packet - do character-stuffing and FCS, and
- * send it onwards.
- */
- ahdlc_encode(q, mp);
- freemsg(mp);
- break;
-
- case M_IOCTL:
- iop = (struct iocblk *) mp->b_rptr;
- error = EINVAL;
- switch (iop->ioc_cmd) {
- case PPPIO_XACCM:
- if ((iop->ioc_count < sizeof(u_int32_t)) ||
- (iop->ioc_count > sizeof(ext_accm))) {
- break;
- }
- if (mp->b_cont == 0) {
- DPRINT1("ahdlc_wput/%d: PPPIO_XACCM b_cont = 0!\n", state->unit);
- break;
- }
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)state->xaccm,
- iop->ioc_count);
- state->xaccm[2] &= ~0x40000000; /* don't escape 0x5e */
- state->xaccm[3] |= 0x60000000; /* do escape 0x7d, 0x7e */
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- iop->ioc_count = 0;
- error = 0;
- break;
-
- case PPPIO_RACCM:
- if (iop->ioc_count != sizeof(u_int32_t))
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ahdlc_wput/%d: PPPIO_RACCM b_cont = 0!\n", state->unit);
- break;
- }
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)&state->raccm,
- sizeof(u_int32_t));
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- iop->ioc_count = 0;
- error = 0;
- break;
-
- case PPPIO_GCLEAN:
- np = allocb(sizeof(int), BPRI_HI);
- if (np == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = np;
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- *(int *)np->b_wptr = state->flags & RCV_FLAGS;
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- np->b_wptr += sizeof(int);
- iop->ioc_count = sizeof(int);
- error = 0;
- break;
-
- case PPPIO_GETSTAT:
- np = allocb(sizeof(struct ppp_stats), BPRI_HI);
- if (np == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = np;
- psp = (struct ppp_stats *) np->b_wptr;
- np->b_wptr += sizeof(struct ppp_stats);
- bzero((caddr_t)psp, sizeof(struct ppp_stats));
- psp->p = state->stats;
- iop->ioc_count = sizeof(struct ppp_stats);
- error = 0;
- break;
-
- case PPPIO_LASTMOD:
- /* we knew this anyway */
- error = 0;
- break;
-
- default:
- error = -1;
- break;
- }
-
- if (error < 0)
- putnext(q, mp);
- else if (error == 0) {
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
- } else {
- mp->b_datap->db_type = M_IOCNAK;
- iop->ioc_count = 0;
- iop->ioc_error = error;
- qreply(q, mp);
- }
- break;
-
- case M_CTL:
- switch (*mp->b_rptr) {
- case PPPCTL_MTU:
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- state->mtu = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- freemsg(mp);
- break;
- case PPPCTL_MRU:
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- state->mru = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- freemsg(mp);
- break;
- case PPPCTL_UNIT:
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- state->unit = mp->b_rptr[1];
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- break;
- default:
- putnext(q, mp);
- }
- break;
-
- default:
- putnext(q, mp);
- }
-
- return 0;
-}
-
-/*
- * Read side put routine
- */
-static int
-ahdlc_rput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- ahdlc_state_t *state;
-
- state = (ahdlc_state_t *) q->q_ptr;
- if (state == 0) {
- DPRINT("state == 0 in ahdlc_rput\n");
- freemsg(mp);
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
- case M_DATA:
- ahdlc_decode(q, mp);
- freemsg(mp);
- break;
-
- case M_HANGUP:
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
- if (state->rx_buf != 0) {
- /* XXX would like to send this up for debugging */
- freemsg(state->rx_buf);
- state->rx_buf = 0;
- }
- state->flags = IFLUSH;
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- putnext(q, mp);
- break;
-
- default:
- putnext(q, mp);
- }
- return 0;
-}
-
-/*
- * Extract bit c from map m, to determine if c needs to be escaped
- */
-#define IN_TX_MAP(c, m) ((m)[(c) >> 5] & (1 << ((c) & 0x1f)))
-
-static void
-ahdlc_encode(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- ahdlc_state_t *state;
- u_int32_t *xaccm, loc_xaccm[8];
- ushort_t fcs;
- size_t outmp_len;
- mblk_t *outmp, *tmp;
- uchar_t *dp, fcs_val;
- int is_lcp, code;
-#if defined(SOL2)
- clock_t lbolt;
-#endif /* SOL2 */
-
- if (msgdsize(mp) < 4) {
- return;
- }
-
- state = (ahdlc_state_t *)q->q_ptr;
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
- /*
- * Allocate an output buffer large enough to handle a case where all
- * characters need to be escaped
- */
- outmp_len = (msgdsize(mp) << 1) + /* input block x 2 */
- (sizeof(fcs) << 2) + /* HDLC FCS x 4 */
- (sizeof(uchar_t) << 1); /* HDLC flags x 2 */
-
- outmp = allocb(outmp_len, BPRI_MED);
- if (outmp == NULL) {
- state->stats.ppp_oerrors++;
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
- putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
- return;
- }
-
-#if defined(SOL2)
- /*
- * Check if our last transmit happenned within flag_time, using
- * the system's LBOLT value in clock ticks
- */
- if (drv_getparm(LBOLT, &lbolt) != -1) {
- if (ABS((clock_t)lbolt - state->lbolt) > state->flag_time) {
- *outmp->b_wptr++ = PPP_FLAG;
- }
- state->lbolt = lbolt;
- } else {
- *outmp->b_wptr++ = PPP_FLAG;
- }
-#else
- /*
- * If the driver below still has a message to process, skip the
- * HDLC flag, otherwise, put one in the beginning
- */
- if (qsize(q->q_next) == 0) {
- *outmp->b_wptr++ = PPP_FLAG;
- }
-#endif
-
- /*
- * All control characters must be escaped for LCP packets with code
- * values between 1 (Conf-Req) and 7 (Code-Rej).
- */
- is_lcp = ((MSG_BYTE(mp, 0) == PPP_ALLSTATIONS) &&
- (MSG_BYTE(mp, 1) == PPP_UI) &&
- (MSG_BYTE(mp, 2) == (PPP_LCP >> 8)) &&
- (MSG_BYTE(mp, 3) == (PPP_LCP & 0xff)) &&
- LCP_USE_DFLT(mp));
-
- xaccm = state->xaccm;
- if (is_lcp) {
- bcopy((caddr_t)state->xaccm, (caddr_t)loc_xaccm, sizeof(loc_xaccm));
- loc_xaccm[0] = ~0; /* force escape on 0x00 through 0x1f */
- xaccm = loc_xaccm;
- }
-
- fcs = PPP_INITFCS; /* Initial FCS is 0xffff */
-
- /*
- * Process this block and the rest (if any) attached to the this one
- */
- for (tmp = mp; tmp; tmp = tmp->b_cont) {
- if (tmp->b_datap->db_type == M_DATA) {
- for (dp = tmp->b_rptr; dp < tmp->b_wptr; dp++) {
- fcs = PPP_FCS(fcs, *dp);
- if (IN_TX_MAP(*dp, xaccm)) {
- *outmp->b_wptr++ = PPP_ESCAPE;
- *outmp->b_wptr++ = *dp ^ PPP_TRANS;
- } else {
- *outmp->b_wptr++ = *dp;
- }
- }
- } else {
- continue; /* skip if db_type is something other than M_DATA */
- }
- }
-
- /*
- * Append the HDLC FCS, making sure that escaping is done on any
- * necessary bytes
- */
- fcs_val = (fcs ^ 0xffff) & 0xff;
- if (IN_TX_MAP(fcs_val, xaccm)) {
- *outmp->b_wptr++ = PPP_ESCAPE;
- *outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
- } else {
- *outmp->b_wptr++ = fcs_val;
- }
-
- fcs_val = ((fcs ^ 0xffff) >> 8) & 0xff;
- if (IN_TX_MAP(fcs_val, xaccm)) {
- *outmp->b_wptr++ = PPP_ESCAPE;
- *outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
- } else {
- *outmp->b_wptr++ = fcs_val;
- }
-
- /*
- * And finally, append the HDLC flag, and send it away
- */
- *outmp->b_wptr++ = PPP_FLAG;
-
- state->stats.ppp_obytes += msgdsize(outmp);
- state->stats.ppp_opackets++;
-
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-
- putnext(q, outmp);
- return;
-}
-
-/*
- * Checks the 32-bit receive ACCM to see if the byte needs un-escaping
- */
-#define IN_RX_MAP(c, m) ((((unsigned int) (uchar_t) (c)) < 0x20) && \
- (m) & (1 << (c)))
-
-
-/*
- * Process received characters.
- */
-static void
-ahdlc_decode(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- ahdlc_state_t *state;
- mblk_t *om;
- uchar_t *dp;
- ushort_t fcs;
-#if defined(SOL2)
- mblk_t *zmp;
-#endif /* SOL2 */
-
-#if defined(SOL2)
- /*
- * In case the driver (or something below) doesn't send
- * data upstream in one message block, concatenate everything
- */
- if (!((mp->b_wptr - mp->b_rptr == msgdsize(mp)) &&
- ((intpointer_t)mp->b_rptr % sizeof(intpointer_t) == 0))) {
-
- zmp = msgpullup(mp, -1);
- freemsg(mp);
- mp = zmp;
- if (mp == 0)
- return;
- }
-#endif /* SOL2 */
-
- state = (ahdlc_state_t *) q->q_ptr;
-
-#if defined(USE_MUTEX)
- mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
- state->stats.ppp_ibytes += msgdsize(mp);
-
- for (dp = mp->b_rptr; dp < mp->b_wptr; dp++) {
-
- /*
- * This should detect the lack of 8-bit communication channel
- * which is necessary for PPP to work. In addition, it also
- * checks on the parity.
- */
- if (*dp & 0x80)
- state->flags |= RCV_B7_1;
- else
- state->flags |= RCV_B7_0;
-
- if (paritytab[*dp >> 5] & (1 << (*dp & 0x1f)))
- state->flags |= RCV_ODDP;
- else
- state->flags |= RCV_EVNP;
-
- /*
- * So we have a HDLC flag ...
- */
- if (*dp == PPP_FLAG) {
-
- /*
- * If we think that it marks the beginning of the frame,
- * then continue to process the next octects
- */
- if ((state->flags & IFLUSH) ||
- (state->rx_buf == 0) ||
- (msgdsize(state->rx_buf) == 0)) {
-
- state->flags &= ~IFLUSH;
- continue;
- }
-
- /*
- * We get here because the above condition isn't true,
- * in which case the HDLC flag was there to mark the end
- * of the frame (or so we think)
- */
- om = state->rx_buf;
-
- if (state->infcs == PPP_GOODFCS) {
- state->stats.ppp_ipackets++;
- adjmsg(om, -PPP_FCSLEN);
- putnext(q, om);
- } else {
- DPRINT2("ppp%d: bad fcs (len=%d)\n",
- state->unit, msgdsize(state->rx_buf));
- freemsg(state->rx_buf);
- state->flags &= ~(IFLUSH | ESCAPED);
- state->stats.ppp_ierrors++;
- putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
- }
-
- state->rx_buf = 0;
- continue;
- }
-
- if (state->flags & IFLUSH) {
- continue;
- }
-
- /*
- * Allocate a receive buffer, large enough to store a frame (after
- * un-escaping) of at least 1500 octets. If MRU is negotiated to
- * be more than the default, then allocate that much. In addition,
- * we add an extra 32-bytes for a fudge factor
- */
- if (state->rx_buf == 0) {
- state->rx_buf_size = (state->mru < PPP_MRU ? PPP_MRU : state->mru);
- state->rx_buf_size += (sizeof(u_int32_t) << 3);
- state->rx_buf = allocb(state->rx_buf_size, BPRI_MED);
-
- /*
- * If allocation fails, try again on the next frame
- */
- if (state->rx_buf == 0) {
- state->flags |= IFLUSH;
- continue;
- }
- state->flags &= ~(IFLUSH | ESCAPED);
- state->infcs = PPP_INITFCS;
- }
-
- if (*dp == PPP_ESCAPE) {
- state->flags |= ESCAPED;
- continue;
- }
-
- /*
- * Make sure we un-escape the necessary characters, as well as the
- * ones in our receive async control character map
- */
- if (state->flags & ESCAPED) {
- *dp ^= PPP_TRANS;
- state->flags &= ~ESCAPED;
- } else if (IN_RX_MAP(*dp, state->raccm))
- continue;
-
- /*
- * Unless the peer lied to us about the negotiated MRU, we should
- * never get a frame which is too long. If it happens, toss it away
- * and grab the next incoming one
- */
- if (msgdsize(state->rx_buf) < state->rx_buf_size) {
- state->infcs = PPP_FCS(state->infcs, *dp);
- *state->rx_buf->b_wptr++ = *dp;
- } else {
- DPRINT2("ppp%d: frame too long (%d)\n",
- state->unit, msgdsize(state->rx_buf));
- freemsg(state->rx_buf);
- state->rx_buf = 0;
- state->flags |= IFLUSH;
- }
- }
-
-#if defined(USE_MUTEX)
- mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-}
-
-static int
-msg_byte(mp, i)
- mblk_t *mp;
- unsigned int i;
-{
- while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
- mp = mp->b_cont;
- if (mp == 0)
- return -1;
- return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c b/mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c
deleted file mode 100644
index f81be8abb..000000000
--- a/mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_ahdlcinfo;
-
-static struct fmodsw fsw = {
- "ppp_ahdl",
- &ppp_ahdlcinfo,
- D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
- &mod_strmodops,
- "PPP async HDLC module",
- &fsw
-};
-
-static struct modlinkage modlinkage = {
- MODREV_1,
- (void *) &modlstrmod,
- NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
- return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
- return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
- struct modinfo *mip;
-{
- return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_comp.c b/mdk-stage1/ppp/solaris/ppp_comp.c
deleted file mode 100644
index f6eef5ab1..000000000
--- a/mdk-stage1/ppp/solaris/ppp_comp.c
+++ /dev/null
@@ -1,1126 +0,0 @@
-/*
- * ppp_comp.c - STREAMS module for kernel-level compression and CCP support.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under SVR4, Solaris 2, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/errno.h>
-#include <sys/stream.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-#ifdef __osf__
-#include <sys/mbuf.h>
-#include <sys/protosw.h>
-#endif
-
-#include <netinet/in.h>
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <net/vjcompress.h>
-
-#define PACKETPTR mblk_t *
-#include <net/ppp-comp.h>
-
-MOD_OPEN_DECL(ppp_comp_open);
-MOD_CLOSE_DECL(ppp_comp_close);
-static int ppp_comp_rput __P((queue_t *, mblk_t *));
-static int ppp_comp_rsrv __P((queue_t *));
-static int ppp_comp_wput __P((queue_t *, mblk_t *));
-static int ppp_comp_wsrv __P((queue_t *));
-static void ppp_comp_ccp __P((queue_t *, mblk_t *, int));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-/* Extract byte i of message mp. */
-#define MSG_BYTE(mp, i) ((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
- msg_byte((mp), (i)))
-
-/* Is this LCP packet one we have to transmit using LCP defaults? */
-#define LCP_USE_DFLT(mp) (1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-#define PPP_COMP_ID 0xbadf
-static struct module_info minfo = {
-#ifdef PRIOQ
- PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16512, 16384,
-#else
- PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16384, 4096,
-#endif
-};
-
-static struct qinit r_init = {
- ppp_comp_rput, ppp_comp_rsrv, ppp_comp_open, ppp_comp_close,
- NULL, &minfo, NULL
-};
-
-static struct qinit w_init = {
- ppp_comp_wput, ppp_comp_wsrv, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int pcmpdevflag = 0;
-#define ppp_compinfo pcmpinfo
-#endif
-struct streamtab ppp_compinfo = {
- &r_init, &w_init, NULL, NULL
-};
-
-int ppp_comp_count; /* number of module instances in use */
-
-#ifdef __osf__
-
-static void ppp_comp_alloc __P((comp_state_t *));
-typedef struct memreq {
- unsigned char comp_opts[20];
- int cmd;
- int thread_status;
- char *returned_mem;
-} memreq_t;
-
-#endif
-
-typedef struct comp_state {
- int flags;
- int mru;
- int mtu;
- int unit;
- struct compressor *xcomp;
- void *xstate;
- struct compressor *rcomp;
- void *rstate;
- struct vjcompress vj_comp;
- int vj_last_ierrors;
- struct pppstat stats;
-#ifdef __osf__
- memreq_t memreq;
- thread_t thread;
-#endif
-} comp_state_t;
-
-
-#ifdef __osf__
-extern task_t first_task;
-#endif
-
-/* Bits in flags are as defined in pppio.h. */
-#define CCP_ERR (CCP_ERROR | CCP_FATALERROR)
-#define LAST_MOD 0x1000000 /* no ppp modules below us */
-#define DBGLOG 0x2000000 /* log debugging stuff */
-
-#define MAX_IPHDR 128 /* max TCP/IP header size */
-#define MAX_VJHDR 20 /* max VJ compressed header size (?) */
-
-#undef MIN /* just in case */
-#define MIN(a, b) ((a) < (b)? (a): (b))
-
-/*
- * List of compressors we know about.
- */
-
-#if DO_BSD_COMPRESS
-extern struct compressor ppp_bsd_compress;
-#endif
-#if DO_DEFLATE
-extern struct compressor ppp_deflate, ppp_deflate_draft;
-#endif
-
-struct compressor *ppp_compressors[] = {
-#if DO_BSD_COMPRESS
- &ppp_bsd_compress,
-#endif
-#if DO_DEFLATE
- &ppp_deflate,
- &ppp_deflate_draft,
-#endif
- NULL
-};
-
-/*
- * STREAMS module entry points.
- */
-MOD_OPEN(ppp_comp_open)
-{
- comp_state_t *cp;
-#ifdef __osf__
- thread_t thread;
-#endif
-
- if (q->q_ptr == NULL) {
- cp = (comp_state_t *) ALLOC_SLEEP(sizeof(comp_state_t));
- if (cp == NULL)
- OPEN_ERROR(ENOSR);
- bzero((caddr_t)cp, sizeof(comp_state_t));
- WR(q)->q_ptr = q->q_ptr = (caddr_t) cp;
- cp->mru = PPP_MRU;
- cp->mtu = PPP_MTU;
- cp->xstate = NULL;
- cp->rstate = NULL;
- vj_compress_init(&cp->vj_comp, -1);
-#ifdef __osf__
- if (!(thread = kernel_thread_w_arg(first_task, ppp_comp_alloc, (void *)cp)))
- OPEN_ERROR(ENOSR);
- cp->thread = thread;
-#endif
- ++ppp_comp_count;
- qprocson(q);
- }
- return 0;
-}
-
-MOD_CLOSE(ppp_comp_close)
-{
- comp_state_t *cp;
-
- qprocsoff(q);
- cp = (comp_state_t *) q->q_ptr;
- if (cp != NULL) {
- if (cp->xstate != NULL)
- (*cp->xcomp->comp_free)(cp->xstate);
- if (cp->rstate != NULL)
- (*cp->rcomp->decomp_free)(cp->rstate);
-#ifdef __osf__
- if (!cp->thread)
- printf("ppp_comp_close: NULL thread!\n");
- else
- thread_terminate(cp->thread);
-#endif
- FREE(cp, sizeof(comp_state_t));
- q->q_ptr = NULL;
- OTHERQ(q)->q_ptr = NULL;
- --ppp_comp_count;
- }
- return 0;
-}
-
-#ifdef __osf__
-
-/* thread for calling back to a compressor's memory allocator
- * Needed for Digital UNIX since it's VM can't handle requests
- * for large amounts of memory without blocking. The thread
- * provides a context in which we can call a memory allocator
- * that may block.
- */
-static void
-ppp_comp_alloc(comp_state_t *cp)
-{
- int len, cmd;
- unsigned char *compressor_options;
- thread_t thread;
- void *(*comp_allocator)();
-
-
-#if defined(MAJOR_VERSION) && (MAJOR_VERSION <= 2)
-
- /* In 2.x and earlier the argument gets passed
- * in the thread structure itself. Yuck.
- */
- thread = current_thread();
- cp = thread->reply_port;
- thread->reply_port = PORT_NULL;
-
-#endif
-
- for (;;) {
- assert_wait((vm_offset_t)&cp->memreq.thread_status, TRUE);
- thread_block();
-
- if (thread_should_halt(current_thread()))
- thread_halt_self();
- cmd = cp->memreq.cmd;
- compressor_options = &cp->memreq.comp_opts[0];
- len = compressor_options[1];
- if (cmd == PPPIO_XCOMP) {
- cp->memreq.returned_mem = cp->xcomp->comp_alloc(compressor_options, len);
- if (!cp->memreq.returned_mem) {
- cp->memreq.thread_status = ENOSR;
- } else {
- cp->memreq.thread_status = 0;
- }
- } else {
- cp->memreq.returned_mem = cp->rcomp->decomp_alloc(compressor_options, len);
- if (!cp->memreq.returned_mem) {
- cp->memreq.thread_status = ENOSR;
- } else {
- cp->memreq.thread_status = 0;
- }
- }
- }
-}
-
-#endif /* __osf__ */
-
-/* here's the deal with memory allocation under Digital UNIX.
- * Some other may also benefit from this...
- * We can't ask for huge chunks of memory in a context where
- * the caller can't be put to sleep (like, here.) The alloc
- * is likely to fail. Instead we do this: the first time we
- * get called, kick off a thread to do the allocation. Return
- * immediately to the caller with EAGAIN, as an indication that
- * they should send down the ioctl again. By the time the
- * second call comes in it's likely that the memory allocation
- * thread will have returned with the requested memory. We will
- * continue to return EAGAIN however until the thread has completed.
- * When it has, we return zero (and the memory) if the allocator
- * was successful and ENOSR otherwise.
- *
- * Callers of the RCOMP and XCOMP ioctls are encouraged (but not
- * required) to loop for some number of iterations with a small
- * delay in the loop body (for instance a 1/10-th second "sleep"
- * via select.)
- */
-static int
-ppp_comp_wput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- struct iocblk *iop;
- comp_state_t *cp;
- int error, len, n;
- int flags, mask;
- mblk_t *np;
- struct compressor **comp;
- struct ppp_stats *psp;
- struct ppp_comp_stats *csp;
- unsigned char *opt_data;
- int nxslots, nrslots;
-
- cp = (comp_state_t *) q->q_ptr;
- if (cp == 0) {
- DPRINT("cp == 0 in ppp_comp_wput\n");
- freemsg(mp);
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
-
- case M_DATA:
- putq(q, mp);
- break;
-
- case M_IOCTL:
- iop = (struct iocblk *) mp->b_rptr;
- error = EINVAL;
- switch (iop->ioc_cmd) {
-
- case PPPIO_CFLAGS:
- /* set/get CCP state */
- if (iop->ioc_count != 2 * sizeof(int))
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ppp_comp_wput/%d: PPPIO_CFLAGS b_cont = 0!\n", cp->unit);
- break;
- }
- flags = ((int *) mp->b_cont->b_rptr)[0];
- mask = ((int *) mp->b_cont->b_rptr)[1];
- cp->flags = (cp->flags & ~mask) | (flags & mask);
- if ((mask & CCP_ISOPEN) && (flags & CCP_ISOPEN) == 0) {
- if (cp->xstate != NULL) {
- (*cp->xcomp->comp_free)(cp->xstate);
- cp->xstate = NULL;
- }
- if (cp->rstate != NULL) {
- (*cp->rcomp->decomp_free)(cp->rstate);
- cp->rstate = NULL;
- }
- cp->flags &= ~CCP_ISUP;
- }
- error = 0;
- iop->ioc_count = sizeof(int);
- ((int *) mp->b_cont->b_rptr)[0] = cp->flags;
- mp->b_cont->b_wptr = mp->b_cont->b_rptr + sizeof(int);
- break;
-
- case PPPIO_VJINIT:
- /*
- * Initialize VJ compressor/decompressor
- */
- if (iop->ioc_count != 2)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ppp_comp_wput/%d: PPPIO_VJINIT b_cont = 0!\n", cp->unit);
- break;
- }
- nxslots = mp->b_cont->b_rptr[0] + 1;
- nrslots = mp->b_cont->b_rptr[1] + 1;
- if (nxslots > MAX_STATES || nrslots > MAX_STATES)
- break;
- vj_compress_init(&cp->vj_comp, nxslots);
- cp->vj_last_ierrors = cp->stats.ppp_ierrors;
- error = 0;
- iop->ioc_count = 0;
- break;
-
- case PPPIO_XCOMP:
- case PPPIO_RCOMP:
- if (iop->ioc_count <= 0)
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ppp_comp_wput/%d: PPPIO_[XR]COMP b_cont = 0!\n", cp->unit);
- break;
- }
- opt_data = mp->b_cont->b_rptr;
- len = mp->b_cont->b_wptr - opt_data;
- if (len > iop->ioc_count)
- len = iop->ioc_count;
- if (opt_data[1] < 2 || opt_data[1] > len)
- break;
- for (comp = ppp_compressors; *comp != NULL; ++comp)
- if ((*comp)->compress_proto == opt_data[0]) {
- /* here's the handler! */
- error = 0;
-#ifndef __osf__
- if (iop->ioc_cmd == PPPIO_XCOMP) {
- /* A previous call may have fetched memory for a compressor
- * that's now being retired or reset. Free it using it's
- * mechanism for freeing stuff.
- */
- if (cp->xstate != NULL) {
- (*cp->xcomp->comp_free)(cp->xstate);
- cp->xstate = NULL;
- }
- cp->xcomp = *comp;
- cp->xstate = (*comp)->comp_alloc(opt_data, len);
- if (cp->xstate == NULL)
- error = ENOSR;
- } else {
- if (cp->rstate != NULL) {
- (*cp->rcomp->decomp_free)(cp->rstate);
- cp->rstate = NULL;
- }
- cp->rcomp = *comp;
- cp->rstate = (*comp)->decomp_alloc(opt_data, len);
- if (cp->rstate == NULL)
- error = ENOSR;
- }
-#else
- if ((error = cp->memreq.thread_status) != EAGAIN)
- if (iop->ioc_cmd == PPPIO_XCOMP) {
- if (cp->xstate) {
- (*cp->xcomp->comp_free)(cp->xstate);
- cp->xstate = 0;
- }
- /* sanity check for compressor options
- */
- if (sizeof (cp->memreq.comp_opts) < len) {
- printf("can't handle options for compressor %d (%d)\n", opt_data[0],
- opt_data[1]);
- cp->memreq.thread_status = ENOSR;
- cp->memreq.returned_mem = 0;
- }
- /* fill in request for the thread and kick it off
- */
- if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
- bcopy(opt_data, cp->memreq.comp_opts, len);
- cp->memreq.cmd = PPPIO_XCOMP;
- cp->xcomp = *comp;
- error = cp->memreq.thread_status = EAGAIN;
- thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
- } else {
- cp->xstate = cp->memreq.returned_mem;
- cp->memreq.returned_mem = 0;
- cp->memreq.thread_status = 0;
- }
- } else {
- if (cp->rstate) {
- (*cp->rcomp->decomp_free)(cp->rstate);
- cp->rstate = NULL;
- }
- if (sizeof (cp->memreq.comp_opts) < len) {
- printf("can't handle options for compressor %d (%d)\n", opt_data[0],
- opt_data[1]);
- cp->memreq.thread_status = ENOSR;
- cp->memreq.returned_mem = 0;
- }
- if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
- bcopy(opt_data, cp->memreq.comp_opts, len);
- cp->memreq.cmd = PPPIO_RCOMP;
- cp->rcomp = *comp;
- error = cp->memreq.thread_status = EAGAIN;
- thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
- } else {
- cp->rstate = cp->memreq.returned_mem;
- cp->memreq.returned_mem = 0;
- cp->memreq.thread_status = 0;
- }
- }
-#endif
- break;
- }
- iop->ioc_count = 0;
- break;
-
- case PPPIO_GETSTAT:
- if ((cp->flags & LAST_MOD) == 0) {
- error = -1; /* let the ppp_ahdl module handle it */
- break;
- }
- np = allocb(sizeof(struct ppp_stats), BPRI_HI);
- if (np == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = np;
- psp = (struct ppp_stats *) np->b_wptr;
- np->b_wptr += sizeof(struct ppp_stats);
- iop->ioc_count = sizeof(struct ppp_stats);
- psp->p = cp->stats;
- psp->vj = cp->vj_comp.stats;
- error = 0;
- break;
-
- case PPPIO_GETCSTAT:
- np = allocb(sizeof(struct ppp_comp_stats), BPRI_HI);
- if (np == 0) {
- error = ENOSR;
- break;
- }
- if (mp->b_cont != 0)
- freemsg(mp->b_cont);
- mp->b_cont = np;
- csp = (struct ppp_comp_stats *) np->b_wptr;
- np->b_wptr += sizeof(struct ppp_comp_stats);
- iop->ioc_count = sizeof(struct ppp_comp_stats);
- bzero((caddr_t)csp, sizeof(struct ppp_comp_stats));
- if (cp->xstate != 0)
- (*cp->xcomp->comp_stat)(cp->xstate, &csp->c);
- if (cp->rstate != 0)
- (*cp->rcomp->decomp_stat)(cp->rstate, &csp->d);
- error = 0;
- break;
-
- case PPPIO_DEBUG:
- if (iop->ioc_count != sizeof(int))
- break;
- if (mp->b_cont == 0) {
- DPRINT1("ppp_comp_wput/%d: PPPIO_DEBUG b_cont = 0!\n", cp->unit);
- break;
- }
- n = *(int *)mp->b_cont->b_rptr;
- if (n == PPPDBG_LOG + PPPDBG_COMP) {
- DPRINT1("ppp_comp%d: debug log enabled\n", cp->unit);
- cp->flags |= DBGLOG;
- error = 0;
- iop->ioc_count = 0;
- } else {
- error = -1;
- }
- break;
-
- case PPPIO_LASTMOD:
- cp->flags |= LAST_MOD;
- error = 0;
- break;
-
- default:
- error = -1;
- break;
- }
-
- if (error < 0)
- putnext(q, mp);
- else if (error == 0) {
- mp->b_datap->db_type = M_IOCACK;
- qreply(q, mp);
- } else {
- mp->b_datap->db_type = M_IOCNAK;
- iop->ioc_error = error;
- iop->ioc_count = 0;
- qreply(q, mp);
- }
- break;
-
- case M_CTL:
- switch (*mp->b_rptr) {
- case PPPCTL_MTU:
- cp->mtu = ((unsigned short *)mp->b_rptr)[1];
- break;
- case PPPCTL_MRU:
- cp->mru = ((unsigned short *)mp->b_rptr)[1];
- break;
- case PPPCTL_UNIT:
- cp->unit = mp->b_rptr[1];
- break;
- }
- putnext(q, mp);
- break;
-
- default:
- putnext(q, mp);
- }
-
- return 0;
-}
-
-static int
-ppp_comp_wsrv(q)
- queue_t *q;
-{
- mblk_t *mp, *cmp = NULL;
- comp_state_t *cp;
- int len, proto, type, hlen, code;
- struct ip *ip;
- unsigned char *vjhdr, *dp;
-
- cp = (comp_state_t *) q->q_ptr;
- if (cp == 0) {
- DPRINT("cp == 0 in ppp_comp_wsrv\n");
- return 0;
- }
-
- while ((mp = getq(q)) != 0) {
- /* assert(mp->b_datap->db_type == M_DATA) */
-#ifdef PRIOQ
- if (!bcanputnext(q,mp->b_band))
-#else
- if (!canputnext(q))
-#endif PRIOQ
- {
- putbq(q, mp);
- break;
- }
-
- /*
- * First check the packet length and work out what the protocol is.
- */
- len = msgdsize(mp);
- if (len < PPP_HDRLEN) {
- DPRINT1("ppp_comp_wsrv: bogus short packet (%d)\n", len);
- freemsg(mp);
- cp->stats.ppp_oerrors++;
- putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
- continue;
- }
- proto = (MSG_BYTE(mp, 2) << 8) + MSG_BYTE(mp, 3);
-
- /*
- * Make sure we've got enough data in the first mblk
- * and that we are its only user.
- */
- if (proto == PPP_CCP)
- hlen = len;
- else if (proto == PPP_IP)
- hlen = PPP_HDRLEN + MAX_IPHDR;
- else
- hlen = PPP_HDRLEN;
- if (hlen > len)
- hlen = len;
- if (mp->b_wptr < mp->b_rptr + hlen || mp->b_datap->db_ref > 1) {
- PULLUP(mp, hlen);
- if (mp == 0) {
- DPRINT1("ppp_comp_wsrv: pullup failed (%d)\n", hlen);
- cp->stats.ppp_oerrors++;
- putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
- continue;
- }
- }
-
- /*
- * Do VJ compression if requested.
- */
- if (proto == PPP_IP && (cp->flags & COMP_VJC)) {
- ip = (struct ip *) (mp->b_rptr + PPP_HDRLEN);
- if (ip->ip_p == IPPROTO_TCP) {
- type = vj_compress_tcp(ip, len - PPP_HDRLEN, &cp->vj_comp,
- (cp->flags & COMP_VJCCID), &vjhdr);
- switch (type) {
- case TYPE_UNCOMPRESSED_TCP:
- mp->b_rptr[3] = proto = PPP_VJC_UNCOMP;
- break;
- case TYPE_COMPRESSED_TCP:
- dp = vjhdr - PPP_HDRLEN;
- dp[1] = mp->b_rptr[1]; /* copy control field */
- dp[0] = mp->b_rptr[0]; /* copy address field */
- dp[2] = 0; /* set protocol field */
- dp[3] = proto = PPP_VJC_COMP;
- mp->b_rptr = dp;
- break;
- }
- }
- }
-
- /*
- * Do packet compression if enabled.
- */
- if (proto == PPP_CCP)
- ppp_comp_ccp(q, mp, 0);
- else if (proto != PPP_LCP && (cp->flags & CCP_COMP_RUN)
- && cp->xstate != NULL) {
- len = msgdsize(mp);
- (*cp->xcomp->compress)(cp->xstate, &cmp, mp, len,
- (cp->flags & CCP_ISUP? cp->mtu + PPP_HDRLEN: 0));
- if (cmp != NULL) {
-#ifdef PRIOQ
- cmp->b_band=mp->b_band;
-#endif PRIOQ
- freemsg(mp);
- mp = cmp;
- }
- }
-
- /*
- * Do address/control and protocol compression if enabled.
- */
- if ((cp->flags & COMP_AC)
- && !(proto == PPP_LCP && LCP_USE_DFLT(mp))) {
- mp->b_rptr += 2; /* drop the address & ctrl fields */
- if (proto < 0x100 && (cp->flags & COMP_PROT))
- ++mp->b_rptr; /* drop the high protocol byte */
- } else if (proto < 0x100 && (cp->flags & COMP_PROT)) {
- /* shuffle up the address & ctrl fields */
- mp->b_rptr[2] = mp->b_rptr[1];
- mp->b_rptr[1] = mp->b_rptr[0];
- ++mp->b_rptr;
- }
-
- cp->stats.ppp_opackets++;
- cp->stats.ppp_obytes += msgdsize(mp);
- putnext(q, mp);
- }
-
- return 0;
-}
-
-static int
-ppp_comp_rput(q, mp)
- queue_t *q;
- mblk_t *mp;
-{
- comp_state_t *cp;
- struct iocblk *iop;
- struct ppp_stats *psp;
-
- cp = (comp_state_t *) q->q_ptr;
- if (cp == 0) {
- DPRINT("cp == 0 in ppp_comp_rput\n");
- freemsg(mp);
- return 0;
- }
-
- switch (mp->b_datap->db_type) {
-
- case M_DATA:
- putq(q, mp);
- break;
-
- case M_IOCACK:
- iop = (struct iocblk *) mp->b_rptr;
- switch (iop->ioc_cmd) {
- case PPPIO_GETSTAT:
- /*
- * Catch this on the way back from the ppp_ahdl module
- * so we can fill in the VJ stats.
- */
- if (mp->b_cont == 0 || iop->ioc_count != sizeof(struct ppp_stats))
- break;
- psp = (struct ppp_stats *) mp->b_cont->b_rptr;
- psp->vj = cp->vj_comp.stats;
- break;
- }
- putnext(q, mp);
- break;
-
- case M_CTL:
- switch (mp->b_rptr[0]) {
- case PPPCTL_IERROR:
- ++cp->stats.ppp_ierrors;
- break;
- case PPPCTL_OERROR:
- ++cp->stats.ppp_oerrors;
- break;
- }
- putnext(q, mp);
- break;
-
- default:
- putnext(q, mp);
- }
-
- return 0;
-}
-
-static int
-ppp_comp_rsrv(q)
- queue_t *q;
-{
- int proto, rv, i;
- mblk_t *mp, *dmp = NULL, *np;
- uchar_t *dp, *iphdr;
- comp_state_t *cp;
- int len, hlen, vjlen;
- u_int iphlen;
-
- cp = (comp_state_t *) q->q_ptr;
- if (cp == 0) {
- DPRINT("cp == 0 in ppp_comp_rsrv\n");
- return 0;
- }
-
- while ((mp = getq(q)) != 0) {
- /* assert(mp->b_datap->db_type == M_DATA) */
- if (!canputnext(q)) {
- putbq(q, mp);
- break;
- }
-
- len = msgdsize(mp);
- cp->stats.ppp_ibytes += len;
- cp->stats.ppp_ipackets++;
-
- /*
- * First work out the protocol and where the PPP header ends.
- */
- i = 0;
- proto = MSG_BYTE(mp, 0);
- if (proto == PPP_ALLSTATIONS) {
- i = 2;
- proto = MSG_BYTE(mp, 2);
- }
- if ((proto & 1) == 0) {
- ++i;
- proto = (proto << 8) + MSG_BYTE(mp, i);
- }
- hlen = i + 1;
-
- /*
- * Now reconstruct a complete, contiguous PPP header at the
- * start of the packet.
- */
- if (hlen < ((cp->flags & DECOMP_AC)? 0: 2)
- + ((cp->flags & DECOMP_PROT)? 1: 2)) {
- /* count these? */
- goto bad;
- }
- if (mp->b_rptr + hlen > mp->b_wptr) {
- adjmsg(mp, hlen); /* XXX check this call */
- hlen = 0;
- }
- if (hlen != PPP_HDRLEN) {
- /*
- * We need to put some bytes on the front of the packet
- * to make a full-length PPP header.
- * If we can put them in *mp, we do, otherwise we
- * tack another mblk on the front.
- * XXX we really shouldn't need to carry around
- * the address and control at this stage.
- */
- dp = mp->b_rptr + hlen - PPP_HDRLEN;
- if (dp < mp->b_datap->db_base || mp->b_datap->db_ref > 1) {
- np = allocb(PPP_HDRLEN, BPRI_MED);
- if (np == 0)
- goto bad;
- np->b_cont = mp;
- mp->b_rptr += hlen;
- mp = np;
- dp = mp->b_wptr;
- mp->b_wptr += PPP_HDRLEN;
- } else
- mp->b_rptr = dp;
-
- dp[0] = PPP_ALLSTATIONS;
- dp[1] = PPP_UI;
- dp[2] = proto >> 8;
- dp[3] = proto;
- }
-
- /*
- * Now see if we have a compressed packet to decompress,
- * or a CCP packet to take notice of.
- */
- proto = PPP_PROTOCOL(mp->b_rptr);
- if (proto == PPP_CCP) {
- len = msgdsize(mp);
- if (mp->b_wptr < mp->b_rptr + len) {
- PULLUP(mp, len);
- if (mp == 0)
- goto bad;
- }
- ppp_comp_ccp(q, mp, 1);
- } else if (proto == PPP_COMP) {
- if ((cp->flags & CCP_ISUP)
- && (cp->flags & CCP_DECOMP_RUN) && cp->rstate
- && (cp->flags & CCP_ERR) == 0) {
- rv = (*cp->rcomp->decompress)(cp->rstate, mp, &dmp);
- switch (rv) {
- case DECOMP_OK:
- freemsg(mp);
- mp = dmp;
- if (mp == NULL) {
- /* no error, but no packet returned either. */
- continue;
- }
- break;
- case DECOMP_ERROR:
- cp->flags |= CCP_ERROR;
- ++cp->stats.ppp_ierrors;
- putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
- break;
- case DECOMP_FATALERROR:
- cp->flags |= CCP_FATALERROR;
- ++cp->stats.ppp_ierrors;
- putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
- break;
- }
- }
- } else if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
- (*cp->rcomp->incomp)(cp->rstate, mp);
- }
-
- /*
- * Now do VJ decompression.
- */
- proto = PPP_PROTOCOL(mp->b_rptr);
- if (proto == PPP_VJC_COMP || proto == PPP_VJC_UNCOMP) {
- len = msgdsize(mp) - PPP_HDRLEN;
- if ((cp->flags & DECOMP_VJC) == 0 || len <= 0)
- goto bad;
-
- /*
- * Advance past the ppp header.
- * Here we assume that the whole PPP header is in the first mblk.
- */
- np = mp;
- dp = np->b_rptr + PPP_HDRLEN;
- if (dp >= mp->b_wptr) {
- np = np->b_cont;
- dp = np->b_rptr;
- }
-
- /*
- * Make sure we have sufficient contiguous data at this point.
- */
- hlen = (proto == PPP_VJC_COMP)? MAX_VJHDR: MAX_IPHDR;
- if (hlen > len)
- hlen = len;
- if (np->b_wptr < dp + hlen || np->b_datap->db_ref > 1) {
- PULLUP(mp, hlen + PPP_HDRLEN);
- if (mp == 0)
- goto bad;
- np = mp;
- dp = np->b_rptr + PPP_HDRLEN;
- }
-
- if (proto == PPP_VJC_COMP) {
- /*
- * Decompress VJ-compressed packet.
- * First reset compressor if an input error has occurred.
- */
- if (cp->stats.ppp_ierrors != cp->vj_last_ierrors) {
- if (cp->flags & DBGLOG)
- DPRINT1("ppp%d: resetting VJ\n", cp->unit);
- vj_uncompress_err(&cp->vj_comp);
- cp->vj_last_ierrors = cp->stats.ppp_ierrors;
- }
-
- vjlen = vj_uncompress_tcp(dp, np->b_wptr - dp, len,
- &cp->vj_comp, &iphdr, &iphlen);
- if (vjlen < 0) {
- if (cp->flags & DBGLOG)
- DPRINT2("ppp%d: vj_uncomp_tcp failed, pkt len %d\n",
- cp->unit, len);
- ++cp->vj_last_ierrors; /* so we don't reset next time */
- goto bad;
- }
-
- /* drop ppp and vj headers off */
- if (mp != np) {
- freeb(mp);
- mp = np;
- }
- mp->b_rptr = dp + vjlen;
-
- /* allocate a new mblk for the ppp and ip headers */
- if ((np = allocb(iphlen + PPP_HDRLEN + 4, BPRI_MED)) == 0)
- goto bad;
- dp = np->b_rptr; /* prepend mblk with TCP/IP hdr */
- dp[0] = PPP_ALLSTATIONS; /* reconstruct PPP header */
- dp[1] = PPP_UI;
- dp[2] = PPP_IP >> 8;
- dp[3] = PPP_IP;
- bcopy((caddr_t)iphdr, (caddr_t)dp + PPP_HDRLEN, iphlen);
- np->b_wptr = dp + iphlen + PPP_HDRLEN;
- np->b_cont = mp;
-
- /* XXX there seems to be a bug which causes panics in strread
- if we make an mbuf with only the IP header in it :-( */
- if (mp->b_wptr - mp->b_rptr > 4) {
- bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr, 4);
- mp->b_rptr += 4;
- np->b_wptr += 4;
- } else {
- bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr,
- mp->b_wptr - mp->b_rptr);
- np->b_wptr += mp->b_wptr - mp->b_rptr;
- np->b_cont = mp->b_cont;
- freeb(mp);
- }
-
- mp = np;
-
- } else {
- /*
- * "Decompress" a VJ-uncompressed packet.
- */
- cp->vj_last_ierrors = cp->stats.ppp_ierrors;
- if (!vj_uncompress_uncomp(dp, hlen, &cp->vj_comp)) {
- if (cp->flags & DBGLOG)
- DPRINT2("ppp%d: vj_uncomp_uncomp failed, pkt len %d\n",
- cp->unit, len);
- ++cp->vj_last_ierrors; /* don't need to reset next time */
- goto bad;
- }
- mp->b_rptr[3] = PPP_IP; /* fix up the PPP protocol field */
- }
- }
-
- putnext(q, mp);
- continue;
-
- bad:
- if (mp != 0)
- freemsg(mp);
- cp->stats.ppp_ierrors++;
- putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
- }
-
- return 0;
-}
-
-/*
- * Handle a CCP packet being sent or received.
- * Here all the data in the packet is in a single mbuf.
- */
-static void
-ppp_comp_ccp(q, mp, rcvd)
- queue_t *q;
- mblk_t *mp;
- int rcvd;
-{
- int len, clen;
- comp_state_t *cp;
- unsigned char *dp;
-
- len = msgdsize(mp);
- if (len < PPP_HDRLEN + CCP_HDRLEN)
- return;
-
- cp = (comp_state_t *) q->q_ptr;
- dp = mp->b_rptr + PPP_HDRLEN;
- len -= PPP_HDRLEN;
- clen = CCP_LENGTH(dp);
- if (clen > len)
- return;
-
- switch (CCP_CODE(dp)) {
- case CCP_CONFREQ:
- case CCP_TERMREQ:
- case CCP_TERMACK:
- cp->flags &= ~CCP_ISUP;
- break;
-
- case CCP_CONFACK:
- if ((cp->flags & (CCP_ISOPEN | CCP_ISUP)) == CCP_ISOPEN
- && clen >= CCP_HDRLEN + CCP_OPT_MINLEN
- && clen >= CCP_HDRLEN + CCP_OPT_LENGTH(dp + CCP_HDRLEN)) {
- if (!rcvd) {
- if (cp->xstate != NULL
- && (*cp->xcomp->comp_init)
- (cp->xstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
- cp->unit, 0, ((cp->flags & DBGLOG) != 0)))
- cp->flags |= CCP_COMP_RUN;
- } else {
- if (cp->rstate != NULL
- && (*cp->rcomp->decomp_init)
- (cp->rstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
- cp->unit, 0, cp->mru, ((cp->flags & DBGLOG) != 0)))
- cp->flags = (cp->flags & ~CCP_ERR) | CCP_DECOMP_RUN;
- }
- }
- break;
-
- case CCP_RESETACK:
- if (cp->flags & CCP_ISUP) {
- if (!rcvd) {
- if (cp->xstate && (cp->flags & CCP_COMP_RUN))
- (*cp->xcomp->comp_reset)(cp->xstate);
- } else {
- if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
- (*cp->rcomp->decomp_reset)(cp->rstate);
- cp->flags &= ~CCP_ERROR;
- }
- }
- }
- break;
- }
-}
-
-#if 0
-dump_msg(mp)
- mblk_t *mp;
-{
- dblk_t *db;
-
- while (mp != 0) {
- db = mp->b_datap;
- DPRINT2("mp=%x cont=%x ", mp, mp->b_cont);
- DPRINT3("rptr=%x wptr=%x datap=%x\n", mp->b_rptr, mp->b_wptr, db);
- DPRINT2(" base=%x lim=%x", db->db_base, db->db_lim);
- DPRINT2(" ref=%d type=%d\n", db->db_ref, db->db_type);
- mp = mp->b_cont;
- }
-}
-#endif
-
-static int
-msg_byte(mp, i)
- mblk_t *mp;
- unsigned int i;
-{
- while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
- mp = mp->b_cont;
- if (mp == 0)
- return -1;
- return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_comp_mod.c b/mdk-stage1/ppp/solaris/ppp_comp_mod.c
deleted file mode 100644
index 83ff8e252..000000000
--- a/mdk-stage1/ppp/solaris/ppp_comp_mod.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * ppp_comp_mod.c - modload support for PPP compression STREAMS module.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_compinfo;
-
-static struct fmodsw fsw = {
- "ppp_comp",
- &ppp_compinfo,
- D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
- &mod_strmodops,
- "PPP compression module",
- &fsw
-};
-
-static struct modlinkage modlinkage = {
- MODREV_1,
- (void *) &modlstrmod,
- NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
- return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
- return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
- struct modinfo *mip;
-{
- return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_mod.c b/mdk-stage1/ppp/solaris/ppp_mod.c
deleted file mode 100644
index a4b1538a5..000000000
--- a/mdk-stage1/ppp/solaris/ppp_mod.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * ppp_mod.c - modload support for PPP pseudo-device driver.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-#include <sys/ksynch.h>
-
-#ifdef __STDC__
-#define __P(x) x
-#else
-#define __P(x) ()
-#endif
-
-static int ppp_identify __P((dev_info_t *));
-static int ppp_attach __P((dev_info_t *, ddi_attach_cmd_t));
-static int ppp_detach __P((dev_info_t *, ddi_detach_cmd_t));
-static int ppp_devinfo __P((dev_info_t *, ddi_info_cmd_t, void *, void **));
-
-extern struct streamtab pppinfo;
-extern krwlock_t ppp_lower_lock;
-
-static dev_info_t *ppp_dip;
-
-static struct cb_ops cb_ppp_ops = {
- nulldev, nulldev, nodev, nodev, /* cb_open, ... */
- nodev, nodev, nodev, nodev, /* cb_dump, ... */
- nodev, nodev, nodev, nochpoll, /* cb_devmap, ... */
- ddi_prop_op, /* cb_prop_op */
- &pppinfo, /* cb_stream */
- D_NEW|D_MP|D_MTQPAIR|D_MTOUTPERIM|D_MTOCEXCL /* cb_flag */
-};
-
-static struct dev_ops ppp_ops = {
- DEVO_REV, /* devo_rev */
- 0, /* devo_refcnt */
- ppp_devinfo, /* devo_getinfo */
- ppp_identify, /* devo_identify */
- nulldev, /* devo_probe */
- ppp_attach, /* devo_attach */
- ppp_detach, /* devo_detach */
- nodev, /* devo_reset */
- &cb_ppp_ops, /* devo_cb_ops */
- NULL /* devo_bus_ops */
-};
-
-/*
- * Module linkage information
- */
-
-static struct modldrv modldrv = {
- &mod_driverops, /* says this is a pseudo driver */
- "PPP-2.3 multiplexing driver",
- &ppp_ops /* driver ops */
-};
-
-static struct modlinkage modlinkage = {
- MODREV_1,
- (void *) &modldrv,
- NULL
-};
-
-int
-_init(void)
-{
- return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
- return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
- struct modinfo *mip;
-{
- return mod_info(&modlinkage, mip);
-}
-
-static int
-ppp_identify(dip)
- dev_info_t *dip;
-{
- return strcmp(ddi_get_name(dip), "ppp") == 0? DDI_IDENTIFIED:
- DDI_NOT_IDENTIFIED;
-}
-
-static int
-ppp_attach(dip, cmd)
- dev_info_t *dip;
- ddi_attach_cmd_t cmd;
-{
-
- if (cmd != DDI_ATTACH)
- return DDI_FAILURE;
- if (ddi_create_minor_node(dip, "ppp", S_IFCHR, 0, DDI_PSEUDO, CLONE_DEV)
- == DDI_FAILURE) {
- ddi_remove_minor_node(dip, NULL);
- return DDI_FAILURE;
- }
- rw_init(&ppp_lower_lock, NULL, RW_DRIVER, NULL);
- return DDI_SUCCESS;
-}
-
-static int
-ppp_detach(dip, cmd)
- dev_info_t *dip;
- ddi_detach_cmd_t cmd;
-{
- rw_destroy(&ppp_lower_lock);
- ddi_remove_minor_node(dip, NULL);
- return DDI_SUCCESS;
-}
-
-static int
-ppp_devinfo(dip, cmd, arg, result)
- dev_info_t *dip;
- ddi_info_cmd_t cmd;
- void *arg;
- void **result;
-{
- int error;
-
- error = DDI_SUCCESS;
- switch (cmd) {
- case DDI_INFO_DEVT2DEVINFO:
- if (ppp_dip == NULL)
- error = DDI_FAILURE;
- else
- *result = (void *) ppp_dip;
- break;
- case DDI_INFO_DEVT2INSTANCE:
- *result = NULL;
- break;
- default:
- error = DDI_FAILURE;
- }
- return error;
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_mod.h b/mdk-stage1/ppp/solaris/ppp_mod.h
deleted file mode 100644
index f0af00886..000000000
--- a/mdk-stage1/ppp/solaris/ppp_mod.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Miscellaneous definitions for PPP STREAMS modules.
- */
-
-/*
- * Macros for allocating and freeing kernel memory.
- */
-#ifdef SVR4 /* SVR4, including Solaris 2 */
-#include <sys/kmem.h>
-#define ALLOC_SLEEP(n) kmem_alloc((n), KM_SLEEP)
-#define ALLOC_NOSLEEP(n) kmem_alloc((n), KM_NOSLEEP)
-#define FREE(p, n) kmem_free((p), (n))
-#endif
-
-#ifdef SUNOS4
-#include <sys/kmem_alloc.h> /* SunOS 4.x */
-#define ALLOC_SLEEP(n) kmem_alloc((n), KMEM_SLEEP)
-#define ALLOC_NOSLEEP(n) kmem_alloc((n), KMEM_NOSLEEP)
-#define FREE(p, n) kmem_free((p), (n))
-#define NOTSUSER() (suser()? 0: EPERM)
-#define bcanputnext(q, band) canputnext((q))
-#endif /* SunOS 4 */
-
-#ifdef __osf__
-#include <sys/malloc.h>
-
-/* caution: this mirrors macros in sys/malloc.h, and uses interfaces
- * which are subject to change.
- * The problems are that:
- * - the official MALLOC macro wants the lhs of the assignment as an argument,
- * and it takes care of the assignment itself (yuck.)
- * - PPP insists on using "FREE" which conflicts with a macro of the same name.
- *
- */
-#ifdef BUCKETINDX /* V2.0 */
-#define ALLOC_SLEEP(n) (void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n) (void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_NOWAIT)
-#else
-#define ALLOC_SLEEP(n) (void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n) (void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_NOWAIT)
-#endif
-
-#define bcanputnext(q, band) canputnext((q))
-
-#ifdef FREE
-#undef FREE
-#endif
-#define FREE(p, n) free((void *)(p), M_DEVBUF)
-
-#define NO_DLPI 1
-
-#ifndef IFT_PPP
-#define IFT_PPP 0x17
-#endif
-
-#include <sys/proc.h>
-#define NOTSUSER() (suser(u.u_procp->p_rcred, &u.u_acflag) ? EPERM : 0)
-
-/* #include "ppp_osf.h" */
-
-#endif /* __osf__ */
-
-#ifdef AIX4
-#define ALLOC_SLEEP(n) xmalloc((n), 0, pinned_heap) /* AIX V4.x */
-#define ALLOC_NOSLEEP(n) xmalloc((n), 0, pinned_heap) /* AIX V4.x */
-#define FREE(p, n) xmfree((p), pinned_heap)
-#define NOTSUSER() (suser()? 0: EPERM)
-#endif /* AIX */
-
-/*
- * Macros for printing debugging stuff.
- */
-#ifdef DEBUG
-#if defined(SVR4) || defined(__osf__)
-#if defined(SNI)
-#include <sys/strlog.h>
-#define STRLOG_ID 4712
-#define DPRINT(f) strlog(STRLOG_ID, 0, 0, SL_TRACE, f)
-#define DPRINT1(f, a1) strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1)
-#define DPRINT2(f, a1, a2) strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3) strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2, a3)
-#else
-#define DPRINT(f) cmn_err(CE_CONT, f)
-#define DPRINT1(f, a1) cmn_err(CE_CONT, f, a1)
-#define DPRINT2(f, a1, a2) cmn_err(CE_CONT, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3) cmn_err(CE_CONT, f, a1, a2, a3)
-#endif /* SNI */
-#else
-#define DPRINT(f) printf(f)
-#define DPRINT1(f, a1) printf(f, a1)
-#define DPRINT2(f, a1, a2) printf(f, a1, a2)
-#define DPRINT3(f, a1, a2, a3) printf(f, a1, a2, a3)
-#endif /* SVR4 or OSF */
-
-#else
-#define DPRINT(f) 0
-#define DPRINT1(f, a1) 0
-#define DPRINT2(f, a1, a2) 0
-#define DPRINT3(f, a1, a2, a3) 0
-#endif /* DEBUG */
-
-#ifndef SVR4
-typedef unsigned char uchar_t;
-typedef unsigned short ushort_t;
-#ifndef __osf__
-typedef int minor_t;
-#endif
-#endif
-
-/*
- * If we don't have multithreading support, define substitutes.
- */
-#ifndef D_MP
-# define qprocson(q)
-# define qprocsoff(q)
-# define put(q, mp) ((*(q)->q_qinfo->qi_putp)((q), (mp)))
-# define canputnext(q) canput((q)->q_next)
-# define qwriter(q, mp, func, scope) (func)((q), (mp))
-#endif
-
-#ifdef D_MP
-/* Use msgpullup if we have other multithreading support. */
-#define PULLUP(mp, len) \
- do { \
- mblk_t *np = msgpullup((mp), (len)); \
- freemsg((mp)); \
- mp = np; \
- } while (0)
-
-#else
-/* Use pullupmsg if we don't have any multithreading support. */
-#define PULLUP(mp, len) \
- do { \
- if (!pullupmsg((mp), (len))) { \
- freemsg((mp)); \
- mp = 0; \
- } \
- } while (0)
-#endif
-
-/*
- * How to declare the open and close procedures for a module.
- */
-#ifdef SVR4
-#define MOD_OPEN_DECL(name) \
-static int name __P((queue_t *, dev_t *, int, int, cred_t *))
-
-#define MOD_CLOSE_DECL(name) \
-static int name __P((queue_t *, int, cred_t *))
-
-#define MOD_OPEN(name) \
-static int name(q, devp, flag, sflag, credp) \
- queue_t *q; \
- dev_t *devp; \
- int flag, sflag; \
- cred_t *credp;
-
-#define MOD_CLOSE(name) \
-static int name(q, flag, credp) \
- queue_t *q; \
- int flag; \
- cred_t *credp;
-
-#define OPEN_ERROR(x) return (x)
-#define DRV_OPEN_OK(dev) return 0
-
-#define NOTSUSER() (drv_priv(credp))
-
-#else /* not SVR4 */
-#define MOD_OPEN_DECL(name) \
-static int name __P((queue_t *, int, int, int))
-
-#define MOD_CLOSE_DECL(name) \
-static int name __P((queue_t *, int))
-
-#define MOD_OPEN(name) \
-static int name(q, dev, flag, sflag) \
- queue_t *q; \
- int dev; \
- int flag, sflag;
-
-#define MOD_CLOSE(name) \
-static int name(q, flag) \
- queue_t *q; \
- int flag;
-
-#define OPEN_ERROR(x) { u.u_error = (x); return OPENFAIL; }
-#define DRV_OPEN_OK(dev) return (dev)
-
-#endif /* SVR4 */
diff --git a/mdk-stage1/ppp/sunos4/Makedefs b/mdk-stage1/ppp/sunos4/Makedefs
deleted file mode 100644
index 8b56a2b67..000000000
--- a/mdk-stage1/ppp/sunos4/Makedefs
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# defines common to several Makefiles
-#
-
-INSTALL= install -o root -g daemon
-
-BINDIR = /usr/local/etc
-MANDIR = /usr/local/man
-ETCDIR = /etc/ppp
-
-# To use gcc, uncomment the next line.
-#CC = gcc
-COPTS = -O
diff --git a/mdk-stage1/ppp/sunos4/Makefile b/mdk-stage1/ppp/sunos4/Makefile
deleted file mode 100644
index 701e24e14..000000000
--- a/mdk-stage1/ppp/sunos4/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-# Makefile for STREAMS modules for SunOS 4.
-#
-# $Id$
-#
-
-include Makedefs
-
-LD = /usr/bin/ld # make sure we don't get gnu ld
-
-# Defining __$(ARCH)__ is for gcc's broken version of sun/vddrv.h.
-ARCH = `/bin/arch -k`
-DEFINES= -DKERNEL -D_KERNEL -DSUNOS4 -D$(ARCH) -D__$(ARCH)__ \
- -DDEBUG -DNO_DLPI -DSNIT_SUPPORT
-CFLAGS= $(DEFINES) -I../include $(COPTS)
-
-MODULES= ppp_mod.o ppp_ahdl_mod.o ppp_comp_mod.o if_ppp_mod.o
-
-all: $(MODULES)
-
-ppp_mod.o: ppp.o ppp_vdcmd.o
- $(LD) -r -o ppp_mod.o ppp.o ppp_vdcmd.o
-
-ppp_ahdl_mod.o: ppp_ahdlc.o ppp_ahdlc_vdcmd.o
- $(LD) -r -o ppp_ahdl_mod.o ppp_ahdlc.o ppp_ahdlc_vdcmd.o
-
-COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
- ppp_comp_vdcmd.o
-ppp_comp_mod.o: $(COMP_OBJS)
- $(LD) -r -o $@ $(COMP_OBJS)
-
-if_ppp.o: ../modules/if_ppp.c
- $(CC) $(CFLAGS) -c $?
-bsd-comp.o: ../modules/bsd-comp.c
- $(CC) $(CFLAGS) -c $?
-deflate.o: ../modules/deflate.c
- $(CC) $(CFLAGS) -c $?
-ppp.o: ../modules/ppp.c
- $(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ../modules/ppp_ahdlc.c
- $(CC) $(CFLAGS) -c $?
-ppp_comp.o: ../modules/ppp_comp.c
- $(CC) $(CFLAGS) -c $?
-vjcompress.o: ../modules/vjcompress.c
- $(CC) $(CFLAGS) -c $?
-zlib.o: ../common/zlib.c
- $(CC) $(CFLAGS) -c $?
-
-if_ppp_mod.o: if_ppp.o if_ppp_vdcmd.o
- $(LD) -r -o if_ppp_mod.o if_ppp.o if_ppp_vdcmd.o
-
-install: all
- $(INSTALL) $(MODULES) $(BINDIR)
- ./ppp.INSTALL
-
-clean:
- rm -f ppp ppp_comp ppp_ahdl *.o *~ core
diff --git a/mdk-stage1/ppp/sunos4/Makefile.top b/mdk-stage1/ppp/sunos4/Makefile.top
deleted file mode 100644
index c86e0884d..000000000
--- a/mdk-stage1/ppp/sunos4/Makefile.top
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# ppp top level makefile
-#
-
-include sunos4/Makedefs
-
-all:
- cd chat; $(MAKE) all
- cd pppd; $(MAKE) all
- cd pppstats; $(MAKE) all
- cd sunos4; $(MAKE) all
- cd pppdump; $(MAKE) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
- cd chat; $(MAKE) install
- cd pppd; $(MAKE) install
- cd pppstats; $(MAKE) install
- cd pppdump; $(MAKE) install
- cd sunos4; $(MAKE) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
- $(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
- $(INSTALL) -c -m 644 etc.ppp/options $@
-$(ETCDIR)/pap-secrets:
- $(INSTALL) -c -m 600 etc.ppp/pap-secrets $@
-$(ETCDIR)/chap-secrets:
- $(INSTALL) -c -m 600 etc.ppp/chap-secrets $@
-
-$(BINDIR):
- $(INSTALL) -d -m 755 $@
-$(MANDIR)/man8:
- $(INSTALL) -d -m 755 $@
-$(ETCDIR):
- $(INSTALL) -d -m 755 $@
-
-clean:
- rm -f *~
- cd chat; $(MAKE) clean
- cd pppd; $(MAKE) clean
- cd pppstats; $(MAKE) clean
- cd sunos4; $(MAKE) clean
-
diff --git a/mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c b/mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c
deleted file mode 100644
index 2bf9710f4..000000000
--- a/mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab if_pppinfo;
-
-static struct vdldrv vd = {
- VDMAGIC_USER,
- "if_ppp"
-};
-
-static int fmodsw_index = -1;
-
-int
-if_ppp_vdcmd(fun, vdp, vdi, vds)
- unsigned int fun;
- struct vddrv *vdp;
- addr_t vdi;
- struct vdstat *vds;
-{
- int n, error;
-
- switch (fun) {
- case VDLOAD:
- vdp->vdd_vdtab = (struct vdlinkage *) &vd;
- if (fmodsw_index >= 0)
- return EBUSY;
- for (n = 0; n < fmodcnt; ++n)
- if (fmodsw[n].f_str == 0)
- break;
- if (n >= fmodcnt)
- return ENODEV;
- strncpy(fmodsw[n].f_name, vd.Drv_name, FMNAMESZ+1);
- fmodsw[n].f_str = &if_pppinfo;
- fmodsw_index = n;
- break;
-
- case VDUNLOAD:
- if (fmodsw_index <= 0)
- return EINVAL;
- error = if_ppp_unload();
- if (error != 0)
- return error;
- fmodsw[fmodsw_index].f_name[0] = 0;
- fmodsw[fmodsw_index].f_str = 0;
- fmodsw_index = -1;
- break;
-
- case VDSTAT:
- break;
-
- default:
- return EIO;
- }
- return 0;
-}
diff --git a/mdk-stage1/ppp/sunos4/ppp.INSTALL b/mdk-stage1/ppp/sunos4/ppp.INSTALL
deleted file mode 100755
index 0018bf8d0..000000000
--- a/mdk-stage1/ppp/sunos4/ppp.INSTALL
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/sh
-
-# Script for loading, unloading, etc. ppp modules.
-
-moddir=/usr/local/etc
-etcppp=/etc/ppp
-
-PATH=/usr/etc:/usr/bin
-
-# Check that we're superuser
-touch /tmp/su$$
-if chown root /tmp/su$$ >/dev/null; then :
-else
- echo "$0: must be root."
- rm -f /tmp/su$$
- exit 1
-fi
-rm -f /tmp/su$$
-
-case "$0" in
-*ppp.INSTALL)
- if [ ! -f ppp.INSTALL ]; then
- echo "ppp.INSTALL: not found"
- exit 1
- fi
- for n in INSTALL LOAD UNLOAD MKDEV RMDEV; do
- if [ -h /dev/ppp.$n -o -f /dev/ppp.$n ]; then
- rm /dev/ppp.$n
- fi
- done
- cp ppp.INSTALL /dev
- for n in LOAD UNLOAD MKDEV RMDEV; do
- ln -s ppp.INSTALL /dev/ppp.$n
- done
- ;;
-
-*ppp.LOAD)
- if modstat | grep -w ppp >/dev/null; then
- echo "ppp driver is already loaded."
- exit 1
- fi
- if modstat | grep -w if_ppp >/dev/null; then
- echo "if_ppp module already loaded: not reloading."
- else
- echo -n "if_ppp: "
- modload $moddir/if_ppp_mod.o -sym -entry _if_ppp_vdcmd \
- -o $etcppp/if_ppp_mod
- fi
- echo -n "ppp: "
- modload $moddir/ppp_mod.o -sym -entry _ppp_vdcmd -exec /dev/ppp.MKDEV \
- -o $etcppp/ppp_mod
- echo -n "ppp_comp: "
- modload $moddir/ppp_comp_mod.o -sym -entry _ppp_comp_vdcmd \
- -o $etcppp/ppp_comp
- echo -n "ppp_ahdl: "
- modload $moddir/ppp_ahdl_mod.o -sym -entry _ppp_ahdlc_vdcmd \
- -o $etcppp/ppp_ahdl
- exit 0
- ;;
-
-*ppp.MKDEV)
- # args: module number, type, b-major, c-major
- if [ $# -ne 4 ]; then
- echo "Usage: $0 module-id module-type b-major c-major"
- exit 1
- fi
- if [ "$2" -ne "12345607" -a "$2" -ne "12345600" ]; then
- echo "$0: $2: bad module type"
- exit 1
- fi
- rm -f /dev/ppp
- # we "just know" that 37 is the major number of the clone driver
- mknod /dev/ppp c 37 $4
- chmod 644 /dev/ppp
- exit 0
- ;;
-
-*ppp.UNLOAD)
- stat=0
- if modstat | grep -w if_ppp >/dev/null; then
- echo "$0: not unloading if_ppp module."
- fi
- for mod in ppp ppp_comp ppp_ahdl; do
- id=`modstat | grep -w $mod | awk '{print $1}'`
- if [ x$id = x ]; then
- echo "$mod is not loaded."
- stat=1
- else
- modunload -id $id
- fi
- done
- exit $stat
- ;;
-
-*ppp.RMDEV)
- rm -f /dev/ppp
- exit 0
- ;;
-
-*)
- echo "Invocation names: ppp.INSTALL ppp.LOAD ppp.UNLOAD ppp.MKDEV ppp.RMDEV"
- exit 1
- ;;
-esac
diff --git a/mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c b/mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c
deleted file mode 100644
index 2dbe8262b..000000000
--- a/mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab ppp_ahdlcinfo;
-extern int ppp_ahdlc_count;
-
-static struct vdldrv vd = {
- VDMAGIC_USER,
- "ppp_ahdl"
-};
-
-static int fmodsw_index = -1;
-
-int
-ppp_ahdlc_vdcmd(fun, vdp, vdi, vds)
- unsigned int fun;
- struct vddrv *vdp;
- addr_t vdi;
- struct vdstat *vds;
-{
- int n;
-
- switch (fun) {
- case VDLOAD:
- vdp->vdd_vdtab = (struct vdlinkage *) &vd;
- if (fmodsw_index >= 0)
- return EBUSY;
- for (n = 0; n < fmodcnt; ++n)
- if (fmodsw[n].f_str == 0)
- break;
- if (n >= fmodcnt)
- return ENODEV;
- strncpy(fmodsw[n].f_name, vd.Drv_name, FMNAMESZ+1);
- fmodsw[n].f_str = &ppp_ahdlcinfo;
- fmodsw_index = n;
- break;
-
- case VDUNLOAD:
- if (ppp_ahdlc_count > 0)
- return EBUSY;
- if (fmodsw_index <= 0)
- return EINVAL;
- fmodsw[fmodsw_index].f_name[0] = 0;
- fmodsw[fmodsw_index].f_str = 0;
- fmodsw_index = -1;
- break;
-
- case VDSTAT:
- break;
-
- default:
- return EIO;
- }
- return 0;
-}
diff --git a/mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c b/mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c
deleted file mode 100644
index b81bc47e8..000000000
--- a/mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab ppp_compinfo;
-extern int ppp_comp_count;
-
-static struct vdldrv vd = {
- VDMAGIC_USER,
- "ppp_comp"
-};
-
-static int fmodsw_index = -1;
-
-int
-ppp_comp_vdcmd(fun, vdp, vdi, vds)
- unsigned int fun;
- struct vddrv *vdp;
- addr_t vdi;
- struct vdstat *vds;
-{
- int n;
-
- switch (fun) {
- case VDLOAD:
- vdp->vdd_vdtab = (struct vdlinkage *) &vd;
- if (fmodsw_index >= 0)
- return EBUSY;
- for (n = 0; n < fmodcnt; ++n)
- if (fmodsw[n].f_str == 0)
- break;
- if (n >= fmodcnt)
- return ENODEV;
- strncpy(fmodsw[n].f_name, vd.Drv_name, FMNAMESZ+1);
- fmodsw[n].f_str = &ppp_compinfo;
- fmodsw_index = n;
- break;
-
- case VDUNLOAD:
- if (ppp_comp_count > 0)
- return EBUSY;
- if (fmodsw_index <= 0)
- return EINVAL;
- fmodsw[fmodsw_index].f_name[0] = 0;
- fmodsw[fmodsw_index].f_str = 0;
- fmodsw_index = -1;
- break;
-
- case VDSTAT:
- break;
-
- default:
- return EIO;
- }
- return 0;
-}
diff --git a/mdk-stage1/ppp/sunos4/ppp_vdcmd.c b/mdk-stage1/ppp/sunos4/ppp_vdcmd.c
deleted file mode 100644
index 68095c92e..000000000
--- a/mdk-stage1/ppp/sunos4/ppp_vdcmd.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab pppinfo;
-extern int ppp_count;
-extern int nchrdev;
-
-static struct vdldrv vd = {
- VDMAGIC_PSEUDO,
- "ppp"
-};
-
-extern int nodev();
-
-static struct cdevsw ppp_cdevsw = {
- nodev, nodev, nodev, nodev, nodev, nodev, nodev, 0,
- &pppinfo
-};
-
-static struct cdevsw old_entry;
-
-int
-ppp_vdcmd(fun, vdp, vdi, vds)
- unsigned int fun;
- struct vddrv *vdp;
- addr_t vdi;
- struct vdstat *vds;
-{
- static int majnum = -1;
- int n, maj;
-
- switch (fun) {
- case VDLOAD:
- /*
- * It seems like modload doesn't install the cdevsw entry
- * for us. Oh well...
- */
- for (maj = 1; maj < nchrdev; ++maj)
- if (cdevsw[maj].d_open == vd_unuseddev)
- break;
- if (maj >= nchrdev)
- return ENODEV;
- vd.Drv_charmajor = maj;
- old_entry = cdevsw[maj];
- cdevsw[maj] = ppp_cdevsw;
- vd.Drv_cdevsw = &ppp_cdevsw;
- vdp->vdd_vdtab = (struct vdlinkage *) &vd;
- majnum = maj;
- break;
-
- case VDUNLOAD:
- if (ppp_count > 0)
- return EBUSY;
- if (vd.Drv_charmajor > 0)
- cdevsw[vd.Drv_charmajor] = old_entry;
- break;
-
- case VDSTAT:
- /*
- * We have to fool the modstat command into thinking
- * that this module is actually a driver! This is
- * so that installation commands that use the -exec
- * option of modload to run a shell script find out
- * the block and/or char major numbers of the driver
- * loaded (so that the shell script can go off to
- * /dev and *MAKE* the bloody device nodes- remember
- * they might change from one load to another if
- * you don't hardwire the number!).
- */
- vds->vds_magic = VDMAGIC_DRV;
- vds->vds_modinfo[0] = (char) 0;
- vds->vds_modinfo[1] = (char) majnum;
- break;
-
- default:
- return EIO;
- }
- return 0;
-}
diff --git a/mdk-stage1/ppp/svr4/Makedefs b/mdk-stage1/ppp/svr4/Makedefs
deleted file mode 100644
index 81db8ab2e..000000000
--- a/mdk-stage1/ppp/svr4/Makedefs
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# defines common to several Makefiles
-#
-
-INSTALL= /usr/sbin/install
-
-BINDIR = /usr/local/bin
-MANDIR = /usr/local/man
-ETCDIR = /etc/ppp
-
-COPTS = -O -Xa
-
-# For compiling with gcc, comment out the COPTS definition above and
-# uncomment the next 2 definitions.
-#CC = gcc
-#COPTS = -O2
diff --git a/mdk-stage1/ppp/svr4/Makedefs.sol2 b/mdk-stage1/ppp/svr4/Makedefs.sol2
deleted file mode 100644
index e8b8d282e..000000000
--- a/mdk-stage1/ppp/svr4/Makedefs.sol2
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# Generic make definitions for Solaris 2
-#
-# $Id$
-#
-
-include ../svr4/Makedefs
-
-CPPFLAGS = -D_KERNEL -DSVR4 -DSOL2 -DPRIOQ -DDEBUG -I../include
-CFLAGS = $(CPPFLAGS) $(COPTS)
-
-# lint-specific variables
-LINT = lint
-LINT_OPT_32 =
-LINT_OPT_64 = -Xarch=v9 -errchk=longptr64
-
-LINT_32 =
-LINT_32 += -erroff=E_BAD_PTR_CAST_ALIGN
-LINT_32 += -erroff=E_SUPPRESSION_DIRECTIVE_UNUSED
-LINT_32 += -erroff=E_SUSPICIOUS_COMPARISON
-LINT_32 += -erroff=E_CAST_UINT_TO_SIGNED_INT
-LINT_32 += -erroff=E_PASS_UINT_TO_SIGNED_INT
-LINT_32 += -erroff=E_INVALID_ANNOTATION_NAME
-LINT_32 += -erroff=E_FUNC_ARG_UNUSED
-# This might be needed, but zlib.c and vjcompress.c will squawk
-# when not ignored
-LINT_32 += -erroff=E_CASE_FALLTHRU
-LINT_32 += -erroff=E_RET_INT_IMPLICITLY
-LINT_32 += -erroff=E_FUNC_NO_RET_VAL
-# Some STREAMS macros will be noisy too when this isn't ignored
-LINT_32 += -erroff=E_CONSTANT_CONDITION
-LINT_32 += -erroff=E_CONST_EXPR
-
-# Extra noise suppressant for 64-bit
-EXTRA_OFF =
-EXTRA_OFF += -erroff=E_CAST_INT_TO_SMALL_INT
-EXTRA_OFF += -erroff=E_CAST_INT_CONST_TO_SMALL_INT
-EXTRA_OFF += -erroff=E_CAST_TO_PTR_FROM_INT
-EXTRA_OFF += -erroff=E_ASSIGN_INT_TO_SMALL_INT
-EXTRA_OFF += -erroff=E_ASSIGN_INT_FROM_BIG_CONST
-EXTRA_OFF += -erroff=E_CONST_PROMOTED_UNSIGNED_LL
-EXTRA_OFF += -erroff=E_CONST_PROMOTED_LONG_LONG
-EXTRA_OFF += -erroff=E_CONST_TRUNCATED_BY_ASSIGN
-EXTRA_OFF += -erroff=E_PASS_INT_FROM_BIG_CONST
-EXTRA_OFF += -erroff=E_COMP_INT_WITH_LARGE_INT
-EXTRA_OFF += -erroff=E_ASSIGN_UINT_TO_SIGNED_INT
-EXTRA_OFF += -erroff=E_ASSIGN_NARROW_CONV
-EXTRA_OFF += -erroff=E_PASS_INT_TO_SMALL_INT
-EXTRA_OFF += -erroff=E_PTR_CONV_LOSES_BITS
-
-LINT_64 = $(LINT_32)
-LINT_64 += $(EXTRA_OFF)
-
-LINTFLAGS64 = -Xa -nsxmuF -errtags=yes $(LINT_OPT_64) $(LINT_64)
-LINT64 = $(LINT) -c $(LINTFLAGS64) $(CPPFLAGS)
-
-LINTFLAGS32 = -Xa -nsxmuF -errtags=yes $(LINT_OPT_32) $(LINT_32)
-LINT32 = $(LINT) -c $(LINTFLAGS32) $(CPPFLAGS)
-
diff --git a/mdk-stage1/ppp/svr4/Makefile.sol2 b/mdk-stage1/ppp/svr4/Makefile.sol2
deleted file mode 100644
index 5b2ca8635..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.sol2
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# Makefile for STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-COPTS += -xO2 -xspace -W0,-Lt
-
-COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
- ppp_comp_mod.o
-
-all: ppp ppp_ahdl ppp_comp
-
-ppp: ppp.o ppp_mod.o
- ld -r -o $@ ppp.o ppp_mod.o
- chmod +x $@
-
-ppp_ahdl: ppp_ahdlc.o ppp_ahdlc_mod.o
- ld -r -o $@ ppp_ahdlc.o ppp_ahdlc_mod.o
- chmod +x $@
-
-ppp_comp: $(COMP_OBJS)
- ld -r -o $@ $(COMP_OBJS)
- chmod +x $@
-
-bsd-comp.o: ../modules/bsd-comp.c
- $(CC) $(CFLAGS) -c $?
-deflate.o: ../modules/deflate.c
- $(CC) $(CFLAGS) -c $?
-ppp.o: ../modules/ppp.c
- $(CC) $(CFLAGS) -c $?
-ppp_mod.o: ppp_mod.c
- $(CC) $(CFLAGS) -c $?
-ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
- $(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ../modules/ppp_ahdlc.c
- $(CC) $(CFLAGS) -c $?
-ppp_comp.o: ../modules/ppp_comp.c
- $(CC) $(CFLAGS) -c $?
-ppp_comp_mod.o: ppp_comp_mod.c
- $(CC) $(CFLAGS) -c $?
-vjcompress.o: ../modules/vjcompress.c
- $(CC) $(CFLAGS) -c $?
-zlib.o: ../common/zlib.c
- $(CC) $(CFLAGS) -c $?
-
-install:
- cp ppp ppp.conf /kernel/drv
- cp ppp_comp ppp_ahdl /kernel/strmod
- if grep clone:ppp /etc/minor_perm; then :; else \
- echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
- /usr/sbin/rem_drv ppp 2>/dev/null || true
- /usr/sbin/add_drv ppp
-
-SRCS = ../modules/ppp.c ppp_mod.c ../modules/ppp_ahdlc.c ppp_ahdlc_mod.c \
- ../modules/ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
- ../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
- $(LINT32) $(SRCS)
-
-clean:
- rm -f ppp ppp_comp ppp_ahdl *.o *~ core
- rm -f *.ln
diff --git a/mdk-stage1/ppp/svr4/Makefile.sol2-64 b/mdk-stage1/ppp/svr4/Makefile.sol2-64
deleted file mode 100644
index 80c6b185e..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.sol2-64
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# Makefile for 64-bit STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-# Sun's cc flag for LP64 compilation / linkage
-COPTS += -xchip=ultra -xarch=v9 -Wc,-xcode=abs32 -Wc,-Qiselect-regsym=0 -xO3 -xspace -W0,-Lt
-
-# subdirectory where 64-bit objects / binaries will be placed
-LP64DIR = sparcv9
-
-# Name of legacy Makefile (for 32-bit binaries)
-STD_MAKE = Makefile.sol2
-
-COMP_OBJS = $(LP64DIR)/ppp_comp.o $(LP64DIR)/bsd-comp.o \
- $(LP64DIR)/deflate.o $(LP64DIR)/zlib.o $(LP64DIR)/vjcompress.o \
- $(LP64DIR)/ppp_comp_mod.o
-
-all: std_objs $(LP64DIR) ppp ppp_ahdl ppp_comp
-
-std_objs:
- $(MAKE) -f $(STD_MAKE) all
-
-ppp: $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
- ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
- chmod +x $(LP64DIR)/$@
-
-ppp_ahdl: $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
- ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
- chmod +x $(LP64DIR)/$@
-
-ppp_comp: $(COMP_OBJS)
- ld -r -o $(LP64DIR)/$@ $(COMP_OBJS)
- chmod +x $(LP64DIR)/$@
-
-$(LP64DIR)/bsd-comp.o: ../modules/bsd-comp.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/deflate.o: ../modules/deflate.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp.o: ../modules/ppp.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_mod.o: ppp_mod.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc.o: ../modules/ppp_ahdlc.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp.o: ../modules/ppp_comp.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp_mod.o: ppp_comp_mod.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/vjcompress.o: ../modules/vjcompress.c
- $(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/zlib.o: ../common/zlib.c
- $(CC) $(CFLAGS) -c $? -o $@
-
-$(LP64DIR):
- mkdir -m 755 -p $@
-
-install:
- cp ppp ppp.conf /kernel/drv
- cp ppp_comp ppp_ahdl /kernel/strmod
- cp $(LP64DIR)/ppp /kernel/drv/$(LP64DIR)
- cp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl /kernel/strmod/$(LP64DIR)
- if grep clone:ppp /etc/minor_perm; then :; else \
- echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
- /usr/sbin/rem_drv ppp 2>/dev/null || true
- /usr/sbin/add_drv ppp
-
-SRCS = ../modules/ppp.c ppp_mod.c ../modules/ppp_ahdlc.c ppp_ahdlc_mod.c \
- ../modules/ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
- ../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
- $(LINT64) $(SRCS)
-
-lint-32:
- $(LINT32) $(SRCS)
-
-clean:
- $(MAKE) -f $(STD_MAKE) clean
- rm -f $(LP64DIR)/ppp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl $(LP64DIR)/*.o $(LP64DIR)/*~ $(LP64DIR)/core
diff --git a/mdk-stage1/ppp/svr4/Makefile.svr4 b/mdk-stage1/ppp/svr4/Makefile.svr4
deleted file mode 100644
index 252c52428..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.svr4
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Makefile for STREAMS modules for SVR4.
-#
-# $Id$
-#
-
-COPTS = -O
-
-CFLAGS= -D_KERNEL -DSVR4 -DLACHTCP -I../include $(COPTS)
-
-all: ppp ppp_ahdl ppp_comp
-
-ppp: ppp.o
- ld -r -o $@ ppp.o
-
-ppp_ahdl: ppp_ahdlc.o
- ld -r -o $@ ppp_ahdlc.o
-
-ppp_comp: ppp_comp.o bsd-comp.o vjcompress.o deflate.o zlib.o
- ld -r -o $@ ppp_comp.o bsd-comp.o vjcompress.o deflate.o zlib.o
-
-bsd-comp.o: ../modules/bsd-comp.c
- $(CC) $(CFLAGS) -c $?
-deflate.o: ../modules/deflate.c
- $(CC) $(CFLAGS) -c $?
-ppp.o: ../modules/ppp.c
- $(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ../modules/ppp_ahdlc.c
- $(CC) $(CFLAGS) -c $?
-ppp_comp.o: ../modules/ppp_comp.c
- $(CC) $(CFLAGS) -c $?
-vjcompress.o: ../modules/vjcompress.c
- $(CC) $(CFLAGS) -c $?
-zlib.o: ../common/zlib.c
- $(CC) $(CFLAGS) -c $?
-
-install: all
- cp ppp Driver.o
- cp ppp.Master Master
- cp ppp.System System
- cp ppp.Node Node
- /etc/conf/bin/idinstall -d ppp
- /etc/conf/bin/idinstall -a ppp
- cp ppp_comp Driver.o
- cp ppp_comp.Master Master
- cp ppp_comp.System System
- /etc/conf/bin/idinstall -d ppp_comp
- /etc/conf/bin/idinstall -a ppp_comp
- cp ppp_ahdl Driver.o
- cp ppp_ahdl.Master Master
- cp ppp_ahdl.System System
- /etc/conf/bin/idinstall -d ppp_ahdl
- /etc/conf/bin/idinstall -a ppp_ahdl
- @echo
- @echo 'NOTE: You must rebuild your kernel to incorporate the driver.'
- @echo '(use /etc/conf/bin/idbuild)'
- @echo
-
-clean:
- rm -f ppp ppp_comp ppp_ahdl *.o *~ core
diff --git a/mdk-stage1/ppp/svr4/Makefile.top b/mdk-stage1/ppp/svr4/Makefile.top
deleted file mode 100644
index 253e48acb..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.top
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# ppp top level makefile for SVR4 and Solaris 2
-#
-# $Id$
-#
-
-include svr4/Makedefs
-
-all:
- cd chat; $(MAKE) all
- cd pppd; $(MAKE) all
- cd pppstats; $(MAKE) all
- cd pppdump; $(MAKE) all
- cd svr4; $(MAKE) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
- cd chat; $(MAKE) install
- cd pppd; $(MAKE) install
- cd pppstats; $(MAKE) install
- cd pppdump; $(MAKE) install
- cd svr4; $(MAKE) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
- $(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
- cp etc.ppp/options $@
- chmod go-w $@
-$(ETCDIR)/pap-secrets:
- $(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/pap-secrets
-$(ETCDIR)/chap-secrets:
- $(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/chap-secrets
-
-$(BINDIR):
- mkdir -m 755 -p $@
-$(MANDIR)/man8:
- mkdir -m 755 -p $@
-$(ETCDIR):
- mkdir -m 755 -p $@
-
-clean:
- rm -f *~
- cd chat; $(MAKE) clean
- cd pppd; $(MAKE) clean
- cd pppstats; $(MAKE) clean
- cd pppdump; $(MAKE) clean
- cd svr4; $(MAKE) clean
-
diff --git a/mdk-stage1/ppp/svr4/ppp.Master b/mdk-stage1/ppp/svr4/ppp.Master
deleted file mode 100644
index 346db035b..000000000
--- a/mdk-stage1/ppp/svr4/ppp.Master
+++ /dev/null
@@ -1 +0,0 @@
-ppp - Sciof ppp 0 0 1 128 -1
diff --git a/mdk-stage1/ppp/svr4/ppp.Node b/mdk-stage1/ppp/svr4/ppp.Node
deleted file mode 100644
index 7767ade71..000000000
--- a/mdk-stage1/ppp/svr4/ppp.Node
+++ /dev/null
@@ -1 +0,0 @@
-clone ppp c ppp
diff --git a/mdk-stage1/ppp/svr4/ppp.System b/mdk-stage1/ppp/svr4/ppp.System
deleted file mode 100644
index e60c0eec3..000000000
--- a/mdk-stage1/ppp/svr4/ppp.System
+++ /dev/null
@@ -1 +0,0 @@
-ppp Y 1 0 0 0 0 0 0 0
diff --git a/mdk-stage1/ppp/svr4/ppp.conf b/mdk-stage1/ppp/svr4/ppp.conf
deleted file mode 100644
index e443a7aac..000000000
--- a/mdk-stage1/ppp/svr4/ppp.conf
+++ /dev/null
@@ -1 +0,0 @@
-name="ppp" parent="pseudo" instance=0;
diff --git a/mdk-stage1/ppp/svr4/ppp_ahdl.Master b/mdk-stage1/ppp/svr4/ppp_ahdl.Master
deleted file mode 100644
index 4fde52596..000000000
--- a/mdk-stage1/ppp/svr4/ppp_ahdl.Master
+++ /dev/null
@@ -1 +0,0 @@
-ppp_ahdl - iSf phdl 0 0 1 1 -1
diff --git a/mdk-stage1/ppp/svr4/ppp_ahdl.System b/mdk-stage1/ppp/svr4/ppp_ahdl.System
deleted file mode 100644
index f41a500f4..000000000
--- a/mdk-stage1/ppp/svr4/ppp_ahdl.System
+++ /dev/null
@@ -1 +0,0 @@
-ppp_ahdl Y 1 0 0 0 0 0 0 0
diff --git a/mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c b/mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c
deleted file mode 100644
index f81be8abb..000000000
--- a/mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_ahdlcinfo;
-
-static struct fmodsw fsw = {
- "ppp_ahdl",
- &ppp_ahdlcinfo,
- D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
- &mod_strmodops,
- "PPP async HDLC module",
- &fsw
-};
-
-static struct modlinkage modlinkage = {
- MODREV_1,
- (void *) &modlstrmod,
- NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
- return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
- return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
- struct modinfo *mip;
-{
- return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/svr4/ppp_comp.Master b/mdk-stage1/ppp/svr4/ppp_comp.Master
deleted file mode 100644
index 78019064e..000000000
--- a/mdk-stage1/ppp/svr4/ppp_comp.Master
+++ /dev/null
@@ -1 +0,0 @@
-ppp_comp - iSf pcmp 0 0 1 1 -1
diff --git a/mdk-stage1/ppp/svr4/ppp_comp.System b/mdk-stage1/ppp/svr4/ppp_comp.System
deleted file mode 100644
index e69d4a1a3..000000000
--- a/mdk-stage1/ppp/svr4/ppp_comp.System
+++ /dev/null
@@ -1 +0,0 @@
-ppp_comp Y 1 0 0 0 0 0 0 0
diff --git a/mdk-stage1/ppp/svr4/ppp_comp_mod.c b/mdk-stage1/ppp/svr4/ppp_comp_mod.c
deleted file mode 100644
index 83ff8e252..000000000
--- a/mdk-stage1/ppp/svr4/ppp_comp_mod.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * ppp_comp_mod.c - modload support for PPP compression STREAMS module.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_compinfo;
-
-static struct fmodsw fsw = {
- "ppp_comp",
- &ppp_compinfo,
- D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
- &mod_strmodops,
- "PPP compression module",
- &fsw
-};
-
-static struct modlinkage modlinkage = {
- MODREV_1,
- (void *) &modlstrmod,
- NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
- return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
- return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
- struct modinfo *mip;
-{
- return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/svr4/ppp_mod.c b/mdk-stage1/ppp/svr4/ppp_mod.c
deleted file mode 100644
index a4b1538a5..000000000
--- a/mdk-stage1/ppp/svr4/ppp_mod.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * ppp_mod.c - modload support for PPP pseudo-device driver.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies. This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-#include <sys/ksynch.h>
-
-#ifdef __STDC__
-#define __P(x) x
-#else
-#define __P(x) ()
-#endif
-
-static int ppp_identify __P((dev_info_t *));
-static int ppp_attach __P((dev_info_t *, ddi_attach_cmd_t));
-static int ppp_detach __P((dev_info_t *, ddi_detach_cmd_t));
-static int ppp_devinfo __P((dev_info_t *, ddi_info_cmd_t, void *, void **));
-
-extern struct streamtab pppinfo;
-extern krwlock_t ppp_lower_lock;
-
-static dev_info_t *ppp_dip;
-
-static struct cb_ops cb_ppp_ops = {
- nulldev, nulldev, nodev, nodev, /* cb_open, ... */
- nodev, nodev, nodev, nodev, /* cb_dump, ... */
- nodev, nodev, nodev, nochpoll, /* cb_devmap, ... */
- ddi_prop_op, /* cb_prop_op */
- &pppinfo, /* cb_stream */
- D_NEW|D_MP|D_MTQPAIR|D_MTOUTPERIM|D_MTOCEXCL /* cb_flag */
-};
-
-static struct dev_ops ppp_ops = {
- DEVO_REV, /* devo_rev */
- 0, /* devo_refcnt */
- ppp_devinfo, /* devo_getinfo */
- ppp_identify, /* devo_identify */
- nulldev, /* devo_probe */
- ppp_attach, /* devo_attach */
- ppp_detach, /* devo_detach */
- nodev, /* devo_reset */
- &cb_ppp_ops, /* devo_cb_ops */
- NULL /* devo_bus_ops */
-};
-
-/*
- * Module linkage information
- */
-
-static struct modldrv modldrv = {
- &mod_driverops, /* says this is a pseudo driver */
- "PPP-2.3 multiplexing driver",
- &ppp_ops /* driver ops */
-};
-
-static struct modlinkage modlinkage = {
- MODREV_1,
- (void *) &modldrv,
- NULL
-};
-
-int
-_init(void)
-{
- return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
- return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
- struct modinfo *mip;
-{
- return mod_info(&modlinkage, mip);
-}
-
-static int
-ppp_identify(dip)
- dev_info_t *dip;
-{
- return strcmp(ddi_get_name(dip), "ppp") == 0? DDI_IDENTIFIED:
- DDI_NOT_IDENTIFIED;
-}
-
-static int
-ppp_attach(dip, cmd)
- dev_info_t *dip;
- ddi_attach_cmd_t cmd;
-{
-
- if (cmd != DDI_ATTACH)
- return DDI_FAILURE;
- if (ddi_create_minor_node(dip, "ppp", S_IFCHR, 0, DDI_PSEUDO, CLONE_DEV)
- == DDI_FAILURE) {
- ddi_remove_minor_node(dip, NULL);
- return DDI_FAILURE;
- }
- rw_init(&ppp_lower_lock, NULL, RW_DRIVER, NULL);
- return DDI_SUCCESS;
-}
-
-static int
-ppp_detach(dip, cmd)
- dev_info_t *dip;
- ddi_detach_cmd_t cmd;
-{
- rw_destroy(&ppp_lower_lock);
- ddi_remove_minor_node(dip, NULL);
- return DDI_SUCCESS;
-}
-
-static int
-ppp_devinfo(dip, cmd, arg, result)
- dev_info_t *dip;
- ddi_info_cmd_t cmd;
- void *arg;
- void **result;
-{
- int error;
-
- error = DDI_SUCCESS;
- switch (cmd) {
- case DDI_INFO_DEVT2DEVINFO:
- if (ppp_dip == NULL)
- error = DDI_FAILURE;
- else
- *result = (void *) ppp_dip;
- break;
- case DDI_INFO_DEVT2INSTANCE:
- *result = NULL;
- break;
- default:
- error = DDI_FAILURE;
- }
- return error;
-}
diff --git a/mdk-stage1/probing.c b/mdk-stage1/probing.c
deleted file mode 100644
index 04afc9ce0..000000000
--- a/mdk-stage1/probing.c
+++ /dev/null
@@ -1,656 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-
-/*
- * This contains stuff related to probing:
- * (1) any (actually only SCSI, NET, CPQ, USB Controllers) devices (autoprobe for PCI and USB)
- * (2) IDE media
- * (3) SCSI media
- * (4) ETH devices
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include "stage1.h"
-
-#include "log.h"
-#include "frontend.h"
-#include "modules.h"
-#include "pci-resource/pci-ids.h"
-#ifdef ENABLE_USB
-#include "usb-resource/usb-ids.h"
-#endif
-
-#include "probing.h"
-
-
-struct media_info {
- char * name;
- char * model;
- enum media_type type;
-};
-
-
-static void warning_insmod_failed(enum insmod_return r)
-{
- if (IS_AUTOMATIC && r == INSMOD_FAILED_FILE_NOT_FOUND)
- return;
- if (r != INSMOD_OK) {
- if (r == INSMOD_FAILED_FILE_NOT_FOUND)
- stg1_error_message("This floppy doesn't contain the driver.");
- else
- stg1_error_message("Warning, installation of driver failed. (please include msg from <Alt-F3> for bugreports)");
- }
-}
-
-#ifndef DISABLE_NETWORK
-struct net_description_elem
-{
- char * intf_name;
- char * intf_description;
-};
-static struct net_description_elem net_descriptions[50];
-static int net_descr_number = 0;
-static char * intf_descr_for_discover = NULL;
-static char * net_intf_too_early_name[50]; /* for modules providing more than one net intf */
-static int net_intf_too_early_number = 0;
-static int net_intf_too_early_ptr = 0;
-
-void prepare_intf_descr(const char * intf_descr)
-{
- intf_descr_for_discover = strdup(intf_descr);
-}
-
-void net_discovered_interface(char * intf_name)
-{
- if (!intf_descr_for_discover) {
- net_intf_too_early_name[net_intf_too_early_number++] = strdup(intf_name);
- return;
- }
- if (!intf_name) {
- if (net_intf_too_early_ptr >= net_intf_too_early_number) {
- log_message("NET: was expecting another network interface (broken net module?)");
- return;
- }
- net_descriptions[net_descr_number].intf_name = net_intf_too_early_name[net_intf_too_early_ptr++];
- }
- else
- net_descriptions[net_descr_number].intf_name = strdup(intf_name);
- net_descriptions[net_descr_number].intf_description = strdup(intf_descr_for_discover);
- intf_descr_for_discover = NULL;
- net_descr_number++;
-}
-
-char * get_net_intf_description(char * intf_name)
-{
- int i;
- for (i = 0; i < net_descr_number ; i++)
- if (!strcmp(net_descriptions[i].intf_name, intf_name))
- return net_descriptions[i].intf_description;
- return strdup("unknown");
-}
-#endif
-
-void probe_that_type(enum driver_type type)
-{
- if (IS_EXPERT) {
- ask_insmod(type);
- return;
- }
-
-
- /* ---- PCI probe ---------------------------------------------- */
- {
- FILE * f;
- int len = 0;
- char buf[200];
- struct pci_module_map * pcidb = NULL;
-
- switch (type) {
-#ifndef DISABLE_PCIADAPTERS
-#ifndef DISABLE_MEDIAS
- case SCSI_ADAPTERS:
- pcidb = medias_pci_ids;
- len = medias_num_ids;
- break;
-#endif
-#ifndef DISABLE_NETWORK
- case NETWORK_DEVICES:
- pcidb = network_pci_ids;
- len = network_num_ids;
- break;
-#endif
-#endif
-#ifdef ENABLE_USB
- case USB_CONTROLLERS:
- pcidb = usb_pci_ids;
- len = usb_num_ids;
- break;
-#endif
- default:
- goto end_pci_probe;
- }
-
- if (!(f = fopen("/proc/bus/pci/devices", "rb"))) {
- log_message("PCI: could not open proc file");
- goto end_pci_probe;
- }
-
- while (1) {
- int i, garb, vendor, device;
-
- if (!fgets(buf, sizeof(buf), f)) break;
-
- sscanf(buf, "%x %x", &garb, &vendor);
- device = vendor & 0xFFFF; /* because scanf from dietlibc does not support %4f */
- vendor = (vendor >> 16) & 0xFFFF;
-
- for (i = 0; i < len; i++) {
- if (pcidb[i].vendor == vendor && pcidb[i].device == device) {
- log_message("PCI: device %04x %04x is \"%s\" (%s)", vendor, device, pcidb[i].name, pcidb[i].module);
-#ifndef DISABLE_MEDIAS
- if (type == SCSI_ADAPTERS) {
- int wait_msg = 0;
- enum insmod_return failed;
- if (IS_AUTOMATIC) {
- wait_message("Loading driver for SCSI adapter:\n \n%s", pcidb[i].name);
- wait_msg = 1;
- } else
- stg1_info_message("About to load driver for SCSI adapter:\n \n%s", pcidb[i].name);
- failed = my_insmod(pcidb[i].module, SCSI_ADAPTERS, NULL);
- if (wait_msg)
- remove_wait_message();
- warning_insmod_failed(failed);
-
- }
-#endif
-#ifndef DISABLE_NETWORK
- if (type == NETWORK_DEVICES) {
- stg1_info_message("About to load driver for network device:\n \n%s", pcidb[i].name);
- prepare_intf_descr(pcidb[i].name);
- warning_insmod_failed(my_insmod(pcidb[i].module, NETWORK_DEVICES, NULL));
- if (intf_descr_for_discover) /* for modules providing more than one net intf */
- net_discovered_interface(NULL);
- }
-#endif
-#ifdef ENABLE_USB
- if (type == USB_CONTROLLERS)
- my_insmod(pcidb[i].module, USB_CONTROLLERS, NULL);
-#endif
- }
- }
- }
- fclose(f);
- end_pci_probe:;
- }
-
-
-#ifdef ENABLE_USB
- /* ---- USB probe ---------------------------------------------- */
- {
- static int already_probed_usb_controllers = 0;
- static int already_mounted_usbdev = 0;
-
- FILE * f;
- int len = 0;
- char buf[200];
- struct usb_module_map * usbdb = NULL;
-
- if (!already_probed_usb_controllers) {
- already_probed_usb_controllers = 1;
- probe_that_type(USB_CONTROLLERS);
- }
-
- if (!already_mounted_usbdev) {
- already_mounted_usbdev = 1;
- my_insmod("usb-storage", SCSI_ADAPTERS, NULL);
- if (mount("/proc/bus/usb", "/proc/bus/usb", "usbdevfs", 0, NULL)) {
- log_message("USB: couldn't mount /proc/bus/usb");
- goto end_usb_probe;
- }
- wait_message("Waiting for USB stuff to show up.");
- sleep(4); /* sucking background work */
- remove_wait_message();
- }
-
- if (!(f = fopen("/proc/bus/usb/devices", "rb"))) {
- log_message("USB: could not open proc file");
- goto end_usb_probe;
- }
-
- switch (type) {
- case NETWORK_DEVICES:
- usbdb = usb_usb_ids;
- len = usb_usb_num_ids;
- break;
- default:
- goto end_usb_probe;
- }
-
- while (1) {
- int i, vendor, id;
-
- if (!fgets(buf, sizeof(buf), f)) break;
-
- if (strstr(buf, "Keyboard")) {
- my_insmod("usbkbd", ANY_DRIVER_TYPE, NULL);
- my_insmod("keybdev", ANY_DRIVER_TYPE, NULL);
- }
-
- if (sscanf(buf, "P: Vendor=%x ProdID=%x", &vendor, &id) != 2)
- continue;
-
- for (i = 0; i < len; i++) {
- if (usbdb[i].vendor == vendor && usbdb[i].id == id) {
- log_message("USB: device %04x %04x is \"%s\" (%s)", vendor, id, usbdb[i].name, usbdb[i].module);
-#ifndef DISABLE_NETWORK
- if (type == NETWORK_DEVICES) {
- stg1_info_message("About to load driver for usb network device:\n \n%s", usbdb[i].name);
- prepare_intf_descr(usbdb[i].name);
- warning_insmod_failed(my_insmod(usbdb[i].module, NETWORK_DEVICES, NULL));
- if (intf_descr_for_discover) /* for modules providing more than one net intf */
- net_discovered_interface(NULL);
- }
-#endif
-
- }
- }
- }
- fclose(f);
- end_usb_probe:;
- }
-#endif
-}
-
-
-#ifndef DISABLE_MEDIAS
-static struct media_info * medias = NULL;
-
-static void find_media(void)
-{
- char b[50];
- char buf[5000];
- struct media_info tmp[50];
- int count;
- int fd;
-
- if (!medias)
- probe_that_type(SCSI_ADAPTERS);
- else
- free(medias); /* that does not free the strings, by the way */
-
- /* ----------------------------------------------- */
- log_message("looking for ide media");
-
- count = 0;
- strcpy(b, "/proc/ide/hd");
- for (b[12] = 'a'; b[12] <= 'h'; b[12]++) {
- int i;
- char ide_disk[] = "disk";
- char ide_cdrom[] = "cdrom";
- char ide_tape[] = "tape";
- char ide_floppy[] = "floppy";
-
- /* first, test if file exists (will tell if attached medium exists) */
- b[13] = '\0';
- if (access(b, R_OK))
- continue;
-
- tmp[count].name = strdup("hda");
- tmp[count].name[2] = b[12];
-
- /* media type */
- strcpy(b + 13, "/media");
- fd = open(b, O_RDONLY);
- if (fd == -1) {
- log_message("failed to open %s for reading", b);
- continue;
- }
-
- i = read(fd, buf, sizeof(buf));
- if (i == -1) {
- log_message("failed to read %s", b);
- continue;
- }
- buf[i] = '\0';
- close(fd);
-
- if (ptr_begins_static_str(buf, ide_disk))
- tmp[count].type = DISK;
- else if (ptr_begins_static_str(buf, ide_cdrom))
- tmp[count].type = CDROM;
- else if (ptr_begins_static_str(buf, ide_tape))
- tmp[count].type = TAPE;
- else if (ptr_begins_static_str(buf, ide_floppy))
- tmp[count].type = FLOPPY;
- else
- tmp[count].type = UNKNOWN_MEDIA;
-
- /* media model */
- strcpy(b + 13, "/model");
- fd = open(b, O_RDONLY);
- if (fd == -1) {
- log_message("failed to open %s for reading", b);
- continue;
- }
-
- i = read(fd, buf, sizeof(buf));
- if (i <= 0) {
- log_message("failed to read %s", b);
- tmp[count].model = strdup("(none)");
- }
- else {
- buf[i-1] = '\0'; /* eat the \n */
- tmp[count].model = strdup(buf);
- }
- close(fd);
-
- log_message("IDE/%d: %s is a %s", tmp[count].type, tmp[count].name, tmp[count].model);
- count++;
- }
-
-
- /* ----------------------------------------------- */
- log_message("looking for scsi media");
-
- fd = open("/proc/scsi/scsi", O_RDONLY);
- if (fd != -1) {
- enum { SCSI_TOP, SCSI_HOST, SCSI_VENDOR, SCSI_TYPE } state = SCSI_TOP;
- char * start, * chptr, * next, * end;
- char scsi_disk_count = 'a';
- char scsi_cdrom_count = '0';
- char scsi_tape_count = '0';
-
- char scsi_no_devices[] = "Attached devices: none";
- char scsi_some_devices[] = "Attached devices: ";
- char scsi_host[] = "Host: ";
- char scsi_vendor[] = " Vendor: ";
-
- int i = read(fd, &buf, sizeof(buf)-1);
- if (i < 1) {
- close(fd);
- goto end_scsi;
- }
- close(fd);
- buf[i] = '\0';
-
- if (ptr_begins_static_str(buf, scsi_no_devices))
- goto end_scsi;
-
- start = buf;
- while (*start) {
- char tmp_model[50];
- char tmp_name[10];
-
- chptr = start;
- while (*chptr != '\n') chptr++;
- *chptr = '\0';
- next = chptr + 1;
-
- switch (state) {
- case SCSI_TOP:
- if (!ptr_begins_static_str(start, scsi_some_devices))
- goto end_scsi;
- state = SCSI_HOST;
- break;
-
- case SCSI_HOST:
- if (!ptr_begins_static_str(start, scsi_host))
- goto end_scsi;
- state = SCSI_VENDOR;
- break;
-
- case SCSI_VENDOR:
- if (!ptr_begins_static_str(start, scsi_vendor))
- goto end_scsi;
-
- /* (1) Grab Vendor info */
- start += 10;
- end = chptr = strstr(start, "Model:");
- if (!chptr)
- goto end_scsi;
-
- chptr--;
- while (*chptr == ' ')
- chptr--;
- if (*chptr == ':') {
- chptr++;
- *(chptr + 1) = '\0';
- strcpy(tmp_model,"(unknown)");
- } else {
- *(chptr + 1) = '\0';
- strcpy(tmp_model, start);
- }
-
- /* (2) Grab Model info */
- start = end;
- start += 7;
-
- chptr = strstr(start, "Rev:");
- if (!chptr)
- goto end_scsi;
-
- chptr--;
- while (*chptr == ' ') chptr--;
- *(chptr + 1) = '\0';
-
- strcat(tmp_model, " ");
- strcat(tmp_model, start);
-
- tmp[count].model = strdup(tmp_model);
-
- state = SCSI_TYPE;
-
- break;
-
- case SCSI_TYPE:
- if (strncmp(" Type:", start, 7))
- goto end_scsi;
- *tmp_name = '\0';
-
- if (strstr(start, "Direct-Access")) {
- sprintf(tmp_name, "sd%c", scsi_disk_count++);
- tmp[count].type = DISK;
- } else if (strstr(start, "Sequential-Access")) {
- sprintf(tmp_name, "st%c", scsi_tape_count++);
- tmp[count].type = TAPE;
- } else if (strstr(start, "CD-ROM")) {
- sprintf(tmp_name, "sr%c", scsi_cdrom_count++);
- tmp[count].type = CDROM;
- }
-
- if (*tmp_name) {
- tmp[count].name = strdup(tmp_name);
- log_message("SCSI/%d: %s is a %s", tmp[count].type, tmp[count].name, tmp[count].model);
- count++;
- }
-
- state = SCSI_HOST;
- }
-
- start = next;
- }
-
- end_scsi:;
- }
-
- /* ----------------------------------------------- */
- log_message("looking for Compaq Smart Array media");
- {
- char * procfiles[] = { "/proc/driver/cpqarray/ida0", "/proc/driver/cciss/cciss0", // 2.4 style
- "/proc/array/ida", "/proc/cciss/cciss", // 2.2 style
- NULL };
- static char cpq_descr[] = "Compaq RAID logical disk";
- char ** procfile = procfiles;
- FILE * f;
- while (procfile && *procfile && (f = fopen(*procfile, "rb"))) {
- while (fgets(buf, sizeof(buf), f)) {
- if (ptr_begins_static_str(buf, "ida/") || ptr_begins_static_str(buf, "cciss/")) {
- char * end = strchr(buf, ':');
- if (!end)
- log_message("Inconsistency in %s, line:\n%s", *procfile, buf);
- else {
- *end = '\0';
- tmp[count].name = strdup(buf);
- tmp[count].type = DISK;
- tmp[count].model = cpq_descr;
- log_message("CPQ: found %s", tmp[count].name);
- count++;
- }
- }
- }
- fclose(f);
- procfile++;
- }
- }
-
- /* ----------------------------------------------- */
- log_message("looking for DAC960");
- {
- FILE * f;
- if ((f = fopen("/tmp/syslog", "rb"))) {
- while (fgets(buf, sizeof(buf), f)) {
- char * start;
- if ((start = strstr(buf, "/dev/rd/"))) {
- char * end = strchr(start, ':');
- if (!end)
- log_message("Inconsistency in syslog, line:\n%s", buf);
- else {
- *end = '\0';
- tmp[count].name = strdup(start+5);
- tmp[count].type = DISK;
- start = end + 2;
- end = strchr(start, ',');
- if (end) {
- *end = '\0';
- tmp[count].model = strdup(start);
- } else
- tmp[count].model = "(unknown)";
- log_message("DAC960: found %s (%s)", tmp[count].name, tmp[count].model);
- count++;
- }
- }
- }
- fclose(f);
- }
- }
-
- /* ----------------------------------------------- */
- tmp[count].name = NULL;
- count++;
-
- medias = memdup(tmp, sizeof(struct media_info) * count);
-}
-
-
-/* Finds by media */
-void get_medias(enum media_type media, char *** names, char *** models)
-{
- struct media_info * m;
- char * tmp_names[50];
- char * tmp_models[50];
- int count;
-
- find_media();
-
- m = medias;
-
- count = 0;
- while (m && m->name) {
- if (m->type == media) {
- tmp_names[count] = strdup(m->name);
- tmp_models[count++] = strdup(m->model);
- }
- m++;
- }
- tmp_names[count] = NULL;
- tmp_models[count++] = NULL;
-
- *names = memdup(tmp_names, sizeof(char *) * count);
- *models = memdup(tmp_models, sizeof(char *) * count);
-}
-#endif /* DISABLE_MEDIAS */
-
-
-#ifndef DISABLE_NETWORK
-int net_device_available(char * device) {
- struct ifreq req;
- int s;
-
- s = socket(AF_INET, SOCK_DGRAM, 0);
- if (s < 0) {
- log_perror(device);
- return 0;
- }
- strcpy(req.ifr_name, device);
- if (ioctl(s, SIOCGIFFLAGS, &req)) {
- /* if we can't get the flags, the networking device isn't available */
- close(s);
- return 0;
- }
- close(s);
- return 1;
-}
-
-
-char ** get_net_devices(void)
-{
- char * devices[] = {
- "eth0", "eth1", "eth2", "eth3", "eth4", "eth5",
- "tr0",
- "plip0", "plip1", "plip2",
- "fddi0",
-#ifdef ENABLE_USB
- "usb0", "usb1", "usb2", "usb3",
-#endif
- NULL
- };
- char ** ptr = devices;
- char * tmp[50];
- int i = 0;
- static int already_probed = 0;
-
- if (!already_probed) {
- already_probed = 1; /* cut off loop brought by: probe_that_type => my_insmod => get_net_devices */
- probe_that_type(NETWORK_DEVICES);
- }
-
- while (ptr && *ptr) {
- if (net_device_available(*ptr))
- tmp[i++] = strdup(*ptr);
- ptr++;
- }
- tmp[i++] = NULL;
-
- return memdup(tmp, sizeof(char *) * i);
-}
-#endif /* DISABLE_NETWORK */
diff --git a/mdk-stage1/probing.h b/mdk-stage1/probing.h
deleted file mode 100644
index d2bf1e567..000000000
--- a/mdk-stage1/probing.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#ifndef _PROBING_H_
-#define _PROBING_H_
-
-enum media_type { CDROM, DISK, FLOPPY, TAPE, UNKNOWN_MEDIA };
-
-enum driver_type { SCSI_ADAPTERS, NETWORK_DEVICES, USB_CONTROLLERS, ANY_DRIVER_TYPE };
-
-void get_medias(enum media_type media, char *** names, char *** models);
-char ** get_net_devices(void);
-void net_discovered_interface(char * intf_name);
-char * get_net_intf_description(char * intf_name);
-void prepare_intf_descr(const char * intf_descr);
-
-
-#endif
diff --git a/mdk-stage1/rescue-gui.c b/mdk-stage1/rescue-gui.c
deleted file mode 100644
index dd4b9a0df..000000000
--- a/mdk-stage1/rescue-gui.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2001 MandrakeSoft
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#define _USE_BSD
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/wait.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <linux/unistd.h>
-#include <sys/select.h>
-
-#include "config-stage1.h"
-#include "frontend.h"
-#include "tools.h"
-
-char * env[] = {
- "PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sbin:/mnt/usr/sbin:/mnt/bin:/mnt/usr/bin",
- "LD_LIBRARY_PATH=/lib:/usr/lib:/mnt/lib:/mnt/usr/lib:/usr/X11R6/lib:/mnt/usr/X11R6/lib",
- "HOME=/",
- "TERM=linux",
- "TERMINFO=/etc/terminfo",
- NULL
-};
-
-void pause(void) { unsigned char t; fflush(stdout); read(0, &t, 1); }
-
-
-/* ------ UUURGH this is duplicated from `init.c', don't edit here........ */
-static inline _syscall3(int, reboot, int, magic, int, magic2, int, flag);
-#define LOOP_CLR_FD 0x4C01
-void del_loop(char *device)
-{
- int fd;
- if ((fd = open(device, O_RDONLY, 0)) < 0) {
- printf("del_loop open failed\n");
- return;
- }
-
- if (ioctl(fd, LOOP_CLR_FD, 0) < 0) {
- printf("del_loop ioctl failed");
- return;
- }
-
- close(fd);
-}
-struct filesystem { char * dev; char * name; char * fs; int mounted; };
-void unmount_filesystems(void)
-{
- int fd, size;
- char buf[65535]; /* this should be big enough */
- char *p;
- struct filesystem fs[500];
- int numfs = 0;
- int i, nb;
-
- printf("unmounting filesystems...\n");
-
- fd = open("/proc/mounts", O_RDONLY, 0);
- if (fd < 1) {
- printf("ERROR: failed to open /proc/mounts");
- sleep(2);
- return;
- }
-
- size = read(fd, buf, sizeof(buf) - 1);
- buf[size] = '\0';
-
- close(fd);
-
- p = buf;
- while (*p) {
- fs[numfs].mounted = 1;
- fs[numfs].dev = p;
- while (*p != ' ') p++;
- *p++ = '\0';
- fs[numfs].name = p;
- while (*p != ' ') p++;
- *p++ = '\0';
- fs[numfs].fs = p;
- while (*p != ' ') p++;
- *p++ = '\0';
- while (*p != '\n') p++;
- p++;
- if (strcmp(fs[numfs].name, "/") != 0) numfs++; /* skip if root, no need to take initrd root in account */
- }
-
- /* Pixel's ultra-optimized sorting algorithm:
- multiple passes trying to umount everything until nothing moves
- anymore (a.k.a holy shotgun method) */
- do {
- nb = 0;
- for (i = 0; i < numfs; i++) {
- /*printf("trying with %s\n", fs[i].name);*/
- if (fs[i].mounted && umount(fs[i].name) == 0) {
- if (strncmp(fs[i].dev + sizeof("/dev/") - 1, "loop",
- sizeof("loop") - 1) == 0)
- del_loop(fs[i].dev);
-
- printf("\t%s\n", fs[i].name);
- fs[i].mounted = 0;
- nb++;
- }
- }
- } while (nb);
-
- for (i = nb = 0; i < numfs; i++)
- if (fs[i].mounted) {
- printf("\t%s umount failed\n", fs[i].name);
- if (strcmp(fs[i].fs, "ext2") == 0) nb++; /* don't count not-ext2 umount failed */
- }
-
- if (nb) {
- printf("failed to umount some filesystems\n");
- while (1);
- }
-}
-/* ------ UUURGH -- end */
-
-
-int main(int argc, char **argv)
-{
- enum return_type results;
-
- char install_bootloader[] = "Re-install Boot Loader";
-#ifdef __i386__
- char restore_ms_boot[] = "Restore Windows Boot Loader";
-#endif
- char mount_parts[] = "Mount your partitions under /mnt";
- char go_to_console[] = "Go to console";
- char reboot_[] = "Reboot";
- char doc[] = "Doc: what's addressed by this Rescue?";
-
- char * actions[] = { install_bootloader,
-#ifdef __i386__
- restore_ms_boot,
-#endif
- mount_parts, go_to_console, reboot_, doc, NULL };
- char * choice;
-
- init_frontend("Welcome to " DISTRIB_NAME " Rescue (" VERSION ") " __DATE__ " " __TIME__);
-
- do {
- int pid;
- char * binary = NULL;
-
- choice = "";
- results = ask_from_list("Please choose the desired action.", actions, &choice);
-
- if (ptr_begins_static_str(choice, install_bootloader)) {
- binary = "/usr/bin/install_bootloader";
- }
-#ifdef __i386__
- if (ptr_begins_static_str(choice, restore_ms_boot)) {
- binary = "/usr/bin/restore_ms_boot";
- }
-#endif
- if (ptr_begins_static_str(choice, mount_parts)) {
- binary = "/usr/bin/guessmounts";
- }
- if (ptr_begins_static_str(choice, reboot_)) {
- finish_frontend();
- unmount_filesystems();
- printf("rebooting system\n");
- sleep(2);
- reboot(0xfee1dead, 672274793, 0x01234567);
- }
- if (ptr_begins_static_str(choice, doc)) {
- binary = "/usr/bin/rescue-doc";
- }
-
- if (binary) {
- int wait_status;
- suspend_to_console();
- if (!(pid = fork())) {
-
- char * child_argv[2];
- child_argv[0] = binary;
- child_argv[1] = NULL;
-
- execve(child_argv[0], child_argv, env);
- printf("Can't execute binary (%s)\n<press Enter>\n", binary);
- pause();
-
- return 33;
- }
- while (wait4(-1, &wait_status, 0, NULL) != pid) {};
- printf("<press Enter to return to Rescue GUI>");
- pause();
- resume_from_suspend();
- if (!WIFEXITED(wait_status) || WEXITSTATUS(wait_status) != 0) {
- error_message("Program exited abnormally (return code %d).", WEXITSTATUS(wait_status));
- if (WIFSIGNALED(wait_status))
- error_message("(received signal %d)", WTERMSIG(wait_status));
- }
- }
-
- } while (results == RETURN_OK && !ptr_begins_static_str(choice, go_to_console));
-
- finish_frontend();
- printf("Bye.\n");
-
- return 0;
-}
diff --git a/mdk-stage1/rp-pppoe/.cvsignore b/mdk-stage1/rp-pppoe/.cvsignore
deleted file mode 100644
index 1f345b56b..000000000
--- a/mdk-stage1/rp-pppoe/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pppoe-bin
diff --git a/mdk-stage1/rp-pppoe/README b/mdk-stage1/rp-pppoe/README
deleted file mode 100644
index 269fc16be..000000000
--- a/mdk-stage1/rp-pppoe/README
+++ /dev/null
@@ -1,87 +0,0 @@
-pppoe: a PPP-over-Ethernet redirector for pppd
-Copyright (C) 2001 Roaring Penguin Software Inc.
-
-Much inspiration from an earlier client by Luke Stras.
-
-The MSS clamping was inspired by mssclampfw by Marc Boucher <marc@mbsi.ca>
-with acknowledgements to Rebel.com (http://www.rebel.com). However, the
-actual MSS clamping code is original and is licensed under the GPL, unlike
-the original mssclampfw.
-
-Introduction
-============
-
-pppoe is a user-space redirector which permits the use of PPPoE
-(Point-to-Point Over Ethernet) with Linux. PPPoE is used by many
-ADSL service providers.
-
-Installation
-============
-
-Requirements
-------------
-
-1) Linux 2.2.9 or later on Intel, Sparc or PowerPC. It may work on
- Alpha, too -- anyone care to let me know?
-
- OR
-
- Linux 2.0.36 or later.
-
- OR
-
- FreeBSD, NetBSD or OpenBSD with BPF support. I have access only
- to FreeBSD. In general, I can't answer questions about the *BSD's
- as well as I can about Linux.
-
-
-2) pppd 2.3.10 or later. Versions 2.3.7 and later work unless you use
- demand-dialling. For demand dialling, you *must* use 2.3.10 or later.
-
-QUICKSTART
-----------
-
-If you're lucky, the "quickstart" method will work. After unpacking
-the archive, become root and type:
-
- ./go
-
-This should configure, compile and install the software and set up your
-ADSL connection. You'll have to answer a few questions along the way.
-
-If you want the GUI wrapper, type:
-
- ./go-gui
-
-If ./go and ./go-gui didn't work, read the rest of this README.
-
-Compiling
----------
-
-Compile and install pppd if you don't already have it. Then:
-
-1) Unpack:
-
- $ tar xzvf rp-pppoe-xxx.tar.gz
-
-2) Change to source directory:
-
- $ cd src
-
-3) Configure:
-
- $ ./configure
-
-4) Compile:
-
- $ make
-
-4) Install (this step must be done as root)
-
- # make install
-
-5) Now read doc/HOW-TO-CONNECT
-
---
-David F. Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc.
-http://www.roaringpenguin.com | Linux and UNIX Specialists \ No newline at end of file
diff --git a/mdk-stage1/rp-pppoe/configs/firewall-masq b/mdk-stage1/rp-pppoe/configs/firewall-masq
deleted file mode 100644
index cb16fbecf..000000000
--- a/mdk-stage1/rp-pppoe/configs/firewall-masq
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-#
-# firewall-masq This script sets up firewall rules for a machine
-# acting as a masquerading gateway
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc. This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Interface to Internet
-EXTIF=ppp+
-
-ANY=0.0.0.0/0
-
-ipchains -P input ACCEPT
-ipchains -P output ACCEPT
-ipchains -P forward DENY
-
-ipchains -F forward
-ipchains -F input
-ipchains -F output
-
-# Deny TCP and UDP packets to privileged ports
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p udp -j DENY
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p tcp -j DENY
-
-# Deny TCP connection attempts
-ipchains -A input -l -i $EXTIF -p tcp -y -j DENY
-
-# Deny ICMP echo-requests
-ipchains -A input -l -i $EXTIF -s $ANY echo-request -p icmp -j DENY
-
-# Do masquerading
-ipchains -A forward -j MASQ
-echo 1 > /proc/sys/net/ipv4/ip_forward
diff --git a/mdk-stage1/rp-pppoe/configs/firewall-standalone b/mdk-stage1/rp-pppoe/configs/firewall-standalone
deleted file mode 100644
index bcb1e92b1..000000000
--- a/mdk-stage1/rp-pppoe/configs/firewall-standalone
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# firewall-standalone This script sets up firewall rules for a standalone
-# machine
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc. This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Interface to Internet
-EXTIF=ppp+
-
-ANY=0.0.0.0/0
-
-ipchains -P input ACCEPT
-ipchains -P output ACCEPT
-ipchains -P forward DENY
-
-ipchains -F forward
-ipchains -F input
-ipchains -F output
-
-# Deny TCP and UDP packets to privileged ports
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p udp -j DENY
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p tcp -j DENY
-
-# Deny TCP connection attempts
-ipchains -A input -l -i $EXTIF -p tcp -y -j DENY
-
-# Deny ICMP echo-requests
-ipchains -A input -l -i $EXTIF -s $ANY echo-request -p icmp -j DENY
-
diff --git a/mdk-stage1/rp-pppoe/configs/pap-secrets b/mdk-stage1/rp-pppoe/configs/pap-secrets
deleted file mode 100644
index f4483a723..000000000
--- a/mdk-stage1/rp-pppoe/configs/pap-secrets
+++ /dev/null
@@ -1,9 +0,0 @@
-# Edit this file and place it in /etc/ppp/pap-secrets
-
-#User #Server #Password #IP
-bxxxxx@sympatico.ca * my_password *
-
-# Replace bxxxxx@sympatico.ca with your Sympatico user-ID
-# Replace my_password with your Sympatico password
-
-# For Magma, use xxyyzz@magma.ca
diff --git a/mdk-stage1/rp-pppoe/configs/pppoe-server-options b/mdk-stage1/rp-pppoe/configs/pppoe-server-options
deleted file mode 100644
index 8319870ac..000000000
--- a/mdk-stage1/rp-pppoe/configs/pppoe-server-options
+++ /dev/null
@@ -1,5 +0,0 @@
-# PPP options for the PPPoE server
-require-pap
-login
-lcp-echo-interval 10
-lcp-echo-failure 2
diff --git a/mdk-stage1/rp-pppoe/configs/pppoe.conf b/mdk-stage1/rp-pppoe/configs/pppoe.conf
deleted file mode 100644
index 9f77b913c..000000000
--- a/mdk-stage1/rp-pppoe/configs/pppoe.conf
+++ /dev/null
@@ -1,126 +0,0 @@
-#***********************************************************************
-#
-# pppoe.conf
-#
-# Configuration file for rp-pppoe. Edit as appropriate and install in
-# /etc/ppp/pppoe.conf
-#
-# NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and
-# adsl-status shell scripts. It is *not* used in any way by the
-# "pppoe" executable.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# $Id$
-#***********************************************************************
-
-# When you configure a variable, DO NOT leave spaces around the "=" sign.
-
-# Ethernet card connected to ADSL modem
-ETH=eth1
-
-# ADSL user name. You may have to supply "@provider.com" Sympatico
-# users in Canada do need to include "@sympatico.ca"
-# Sympatico uses PAP authentication. Make sure /etc/ppp/pap-secrets
-# contains the right username/password combination.
-# For Magma, use xxyyzz@magma.ca
-USER=bxxxnxnx@sympatico.ca
-
-# Bring link up on demand? Default is to leave link up all the time.
-# If you want the link to come up on demand, set DEMAND to a number indicating
-# the idle time after which the link is brought down.
-DEMAND=no
-#DEMAND=300
-
-# DNS type: SERVER=obtain from server; SPECIFY=use DNS1 and DNS2;
-# NOCHANGE=do not adjust.
-DNSTYPE=SERVER
-
-# Obtain DNS server addresses from the peer (recent versions of pppd only)
-USEPEERDNS=yes
-
-DNS1=
-DNS2=
-
-### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT
-
-# How long adsl-start waits for a new PPP interface to appear before
-# concluding something went wrong. If you use 0, then adsl-start
-# exits immediately with a successful status and does not wait for the
-# link to come up. Time is in seconds.
-#
-# WARNING WARNING WARNING:
-#
-# If you are using rp-pppoe on a physically-inaccessible host, set
-# CONNECT_TIMEOUT to 0. This makes SURE that the machine keeps trying
-# to connect forever after adsl-start is called. Otherwise, it will
-# give out after CONNECT_TIMEOUT seconds and will not attempt to
-# connect again, making it impossible to reach.
-CONNECT_TIMEOUT=30
-
-# How often in seconds adsl-start polls to check if link is up
-CONNECT_POLL=2
-
-# Specific desired AC Name
-ACNAME=
-
-# Specific desired service name
-SERVICENAME=
-
-# Character to echo at each poll. Use PING="" if you don't want
-# anything echoed
-PING="."
-
-# File where the adsl-connect script writes its process-ID.
-# Three files are actually used:
-# $PIDFILE contains PID of adsl-connect script
-# $PIDFILE.pppoe contains PID of pppoe process
-# $PIDFILE.pppd contains PID of pppd process
-CF_BASE=`basename $CONFIG`
-PIDFILE="/var/run/$CF_BASE-adsl.pid"
-
-# Do you want to use synchronous PPP? "yes" or "no". "yes" is much
-# easier on CPU usage, but may not work for you. It is safer to use
-# "no", but you may want to experiment with "yes". "yes" is generally
-# safe on Linux machines with the n_hdlc line discipline; unsafe on others.
-SYNCHRONOUS=no
-
-# Do you want to clamp the MSS? Here's how to decide:
-# - If you have only a SINGLE computer connected to the ADSL modem, choose
-# "no".
-# - If you have a computer acting as a gateway for a LAN, choose "1412".
-# The setting of 1412 is safe for either setup, but uses slightly more
-# CPU power.
-CLAMPMSS=1412
-#CLAMPMSS=no
-
-# LCP echo interval and failure count.
-LCP_INTERVAL=20
-LCP_FAILURE=3
-
-# PPPOE_TIMEOUT should be about 4*LCP_INTERVAL
-PPPOE_TIMEOUT=80
-
-# Firewalling: One of NONE, STANDALONE or MASQUERADE
-FIREWALL=NONE
-
-# Linux kernel-mode plugin for pppd. If you want to try the kernel-mode
-# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
-LINUX_PLUGIN=
-
-# Any extra arguments to pass to pppoe. Normally, use a blank string
-# like this:
-PPPOE_EXTRA=""
-
-# Rumour has it that "Citizen's Communications" with a 3Com
-# HomeConnect ADSL Modem DualLink requires these extra options:
-# PPPOE_EXTRA="-f 3c12:3c13 -S ISP"
-
-# Any extra arguments to pass to pppd. Normally, use a blank string
-# like this:
-PPPD_EXTRA=""
-
-
diff --git a/mdk-stage1/rp-pppoe/doc/CHANGES b/mdk-stage1/rp-pppoe/doc/CHANGES
deleted file mode 100644
index 9afce027d..000000000
--- a/mdk-stage1/rp-pppoe/doc/CHANGES
+++ /dev/null
@@ -1,177 +0,0 @@
-Changes from Version 2.8 to 3.0:
-
-- Many small improvements to server. Server now only makes one
- discovery socket, systemwide, with addition of "-n" option to pppoe.
-
-- Fixes for compilation problems on BSD, Solaris and some Linux platforms.
-
-- Added "-p" option to pppoe-server to allow you to specify a pool of
- IP addresses to assign to clients.
-
-- Added GUI system (tkpppoe). This work was funded by Iospan
- Wireless, Inc. The GUI includes a Set-UID wrapper (pppoe-wrapper)
- which allows ordinary users to control a link (if so authorized.)
- I believe the wrapper script is secure, but please audit the
- source code (gui/wrapper.c) if you have any concerns.
-
-- Changes to scripts and pppoe.conf. DNS setup is now dynamic (happens
- each time adsl-connect runs.)
-
-- Made relay.c check packet lengths rigorously; made it throw out Ethernet
- frame padding on session packets as well as discovery packets.
-
-Changes from Version 2.7 to 2.8:
-
-- Added init scripts for TurboLinux, courtesy of Yasuhiro Sumi.
-
-- Made relay.c check packet lengths rigorously; made it throw out Ethernet
- frame padding on discovery packets.
-
-*** NOTE: 2.7 was not released publicly
-
-Changes from Version 2.6 to 2.7:
-
-- Completely restructured source file tree.
-
-- Much internal restructuring to eliminate a bunch of global variables.
-
-- adsl-connect now executes /etc/ppp/adsl-lost whenever connection is dropped
- or cannot be established.
-
-- Split pppoe.c into pppoe.c and discovery.c.
-
-- Added relay agent (pppoe-relay).
-
-- Made adsl-connect script use the "-U" (host-unique) option to better support
- multiple PPPoE links.
-
-- Added support for kernel-mode PPPoE (EXPERIMENTAL, UNSUPPORTED!)
-
-- Added "-o" option to PPPoE server; encoded server PID in pppoe-server
- cookie.
-
-Changes from Version 2.5 to 2.6:
-
-- Code should now compile cleanly on Caldera and Slackware Linux
-
-- Fixed rp-pppoe.spec file to work on Mandrake and Red Hat.
-
-- Deleted some obsolete files
-
-- Fixed bug in Solaris/x86 port (thanks to Philippe Levan)
-
-- Made shell scripts nicer under Solaris (again, Philippe Levan)
-
-- Made adsl-status look under /var/run and /etc/ppp for PID files. Should
- fix problems with NetBSD.
-
-- Added PPPD_EXTRA to pppoe.conf; made the PID file depend on the config
- file name. This makes it easier to run multiple PPPoE sessions.
-
-Changes from Version 2.4 to 2.5:
-
-- Tested for zero-length TCP option-length field, and for reverse-packing
- of type/code bitfields. Thanks to Robert Schlabbach for pointing out
- these problems.
-
-- Set umask to 077 in adsl-setup.in to protect created files like
- /etc/ppp/pap-secrets.
-
-Changes from Version 2.3 to 2.4:
-
-- Fixed spec file to automatically add .gz extension to man files as required
-
-- Tightened firewall rules.
-
-- Better check for /var/run in adsl-status; minor shell script fixes and
- cleanups for NetBSD and Solaris.
-
-- Added FAQ to HOW-TO-CONNECT regarding running a script each time a
- connection is made.
-
-Changes from Version 2.2 to 2.3:
-
-- Fixed the init script to create/remove /var/lock/subsys/adsl (patch
- courtesy of Charley Carter.)
-
-- Added support (under Linux) for N_HDLC line discipline which should
- greatly reduce CPU usage. My tests show it cuts CPU usage in half.
- My 486 DX2/66 gets 800 kb/s at 22% CPU usage.
-
-- adsl-connect uses "setsid" (if available) so that adsl-stop doesn't kill
- its caller. There is (IMO) a bug in pppd which kills all processes in
- its process group if the "pty" option is used. The setsid program gets
- around this bug, on Linux at least.
-
-- Port to Solaris, courtesy of David Holland.
-
-- Renamed spec file from "spec" to "rp-pppoe.spec" and made some cleanups.
- NOTE: Red Hat, in their infinite wisdom, decided to make the new RPM
- compress man pages automatically. You may have problems building RPM's
- from source unless you get the latest rpm package and make sure it
- compresses man pages.
-
-Changes from Version 2.1 to 2.2:
-
-- Added "-f" option to pppoe to allow use of any Ethernet frame type
- for PPPoE. USE WITH CAUTION -- this is a workaround for broken DSL
- providers, not something you should monkey with freely!
-
-- Added pppoe-sniff program to help expose non-standard PPPoE implementations.
-
-Changes from Version 2.0 to 2.1:
-
-- Fixed minor bugs in bounds-checking
-
-- Modified adsl-status to use output of "netstat -r -n" to determine whether
- or not link is up. This should make it independent of locale, I hope!
-
-- Added "-k" and "-d" options to pppoe.
-
-Changes from Version 1.9 to 2.0:
-
-- Addition of pppoe-server
-
-- Massive internal code restructuring
-
-- Zealous bounds-checking everywhere.
-
-- adsl-setup now quotes user name and password in /etc/ppp/pap-secrets.
-
-- Ported to OpenBSD, FreeBSD and NetBSD, courtesy of Geoff Mottram
- and Yannis Sismanis.
-
-- Rearranged adsl-* shell scripts, courtesy of Heiko Schlittermann.
-
-- Fixed bug in which Host-Uniq did not work if access concentrator sent
- a cookie.
-
-- Addition of SuSE-specific "init" script, courtesy of Gary Cameron.
-
-Changes from Version 1.8 to 1.9:
-
-- Added some more documentation to HOW-TO-CONNECT
-
-- Demand-dialling option now works correctly
-
-- SIGHUP terminates pppoe after sending a PADT to the access concentrator
-
-- Minor cleanups to connection shell scripts
-
-Changes from Version 1.7 to 1.8:
-
-- Added demand-dialling option
-
-- Clarified HOW-TO-CONNECT
-
-- Added adsl-status script
-
-- Added "restart" and "status" options to Red Hat /etc/rc.d/init.d/adsl script
-
-- Made adsl-setup check for existence of pppd
-
-- Wildcarded external interface in firewall rules
-
-- Made pppoe send a PADT frame if connection is terminated
-
-$Id$
diff --git a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT b/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT
deleted file mode 100644
index 3e888af69..000000000
--- a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT
+++ /dev/null
@@ -1,295 +0,0 @@
-$Id$
-
-This package lets you connect a Linux machine to Sympatico HSE or Magma's
-high-speed service using a Nortel 1-meg modem.
-
-Follow these steps and you should have your high-speed service up and running.
-
-0. Install the rp-pppoe-software
---------------------------------
-
-You should have already done this by the time you're reading this. If not,
-go back and read README.
-
-1. Set up your Ethernet hardware
---------------------------------
-
-First, make sure the Ethernet card you intend to use with the modem is
-visible to the Linux kernel. Just how to do this is beyond the scope
-of this document. However, if the card is the only Ethernet card in
-the system, executing:
-
- ifconfig eth0
-
-should display something like this:
-
- eth0 Link encap:Ethernet HWaddr 00:60:67:62:31:D4
-
-plust some more lines. Your HWaddr will be different. As long as you see
-the HWaddr line, your card should be working.
-
-DO NOT assign an IP address to the Ethernet card. DO NOT configure the
-card to come up at boot time.
-
-2. Configure various files
---------------------------
-
-Several files need editing. The easiest way to do this is to run
-the following command as root:
-
- adsl-setup
-
-Answer the questions and you should be all set. If you want to know what
-goes on behind the scenes, continue reading this document. If you don't
-care and your connection works, stop reading. :-)
-
-3. Edit pap-secrets
--------------------
-
-Edit the "pap-secrets" file, inserting your proper user-ID and password.
-Install the file (or copy the relevant lines) to /etc/ppp/pap-secrets.
-Your ISP may use CHAP authentication. In this case, add the line to
-/etc/ppp/chap-secrets.
-
-4. Edit /etc/ppp/pppoe.conf
------------------------------
-
-The file /etc/ppp/pppoe.conf contains configuration information for the
-ADSL connection. You need to edit the following items:
-
-- Change ETH=eth1 to the correct Ethernet device for your modem.
-- Change USER=bxxxnxnx@sympatico.ca to your proper ADSL user-ID.
-
-Don't edit any of the other settings unless you're an expert.
-
-5. Set up DNS
--------------
-
-If you are using DNS servers supplied by your ISP, edit the file
-/etc/resolv.conf to contain these lines:
-
- nameserver ip_addr_of_first_dns_server
- nameserver ip_addr_of_second_dns_server
-
-For example:
-
- nameserver 204.101.251.1
- nameserver 204.101.251.2
-
-
-6. Firewall your machine
-------------------------
-
-MAKE SURE YOU FIREWALL YOUR MACHINE. A sample firewall script is given
-in the shell script "firewall" To install the script:
-
-a) Copy it to /etc/rc.d/init.d/firewall
-b) Type: chkconfig firewall on
-c) Start the firewall: sh /etc/rc.d/init.d/firewall start
-
-(The above procedure works ONLY on Red Hat-like systems.)
-
-You may want to tweak the script somewhat.
-
-7. Bring up the connection at boot time
----------------------------------------
-
-On a Red Hat system, the installation procedure should have installed
-a script called /etc/rc.d/init.d/adsl. To bring up the connection
-at boot time, just type this command as root:
-
- chkconfig --add adsl
-
-On non-Red-Hat systems, add this line to the end
-of /etc/rc.d/rc.local:
-
- /usr/sbin/adsl-start
-
-8. Configure LAN Hosts
-----------------------
-
-If you have a LAN behind the firewall, you have to lower the TCP
-maximum segment size from the normal 1460 to 1452 (or better, 1412.)
-You have two options: Either set the MTU of all the interfaces on
-other hosts on the LAN to 1452, or use the "-m 1412" option to pppoe.
-The "-m" option for pppoe is far simpler and makes it easier to add
-hosts to the LAN, but consumes some extra CPU time.
-
-If you want to manually configure the LAN hosts, here's how:
-
-In Linux, use: "ifconfig eth0 mtu 1452". For best results, put this
-in an /etc/rc.d/rc.local script.
-
-For Windows, machines, see http://lan.cns.ksu.edu/OS/WIN95/slip95.htm.
-Set the MaxMTU to 1452.
-
-9. Commands to control the ADSL link
-------------------------------------
-
-As root, bring up the link by typing: adsl-start
-As root, bring down the link by typing: adsl-stop
-
-That's it!
-
---
-David F. Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc.
-http://www.roaringpenguin.com | Linux and UNIX Specialists
-
-PROBLEMS! DAVE, IT DOESN'T WORK!
----------------------------------
-
-Here are some problems PPPoE users have encountered.
-
------------------------------------------------------------------------------
-A) Can't see the Ethernet interface
-
-Well, I can't really help you here. To use these instructions, you must
-have Linux working to the point where it recognizes your Ethernet card.
-If you type "ifconfig ethx" and you get back a HWAddr value, your Ethernet
-card is probably OK. But I really can't help with hardware configuration
-issues.
-
------------------------------------------------------------------------------
-B) Connection seems to come up, but I can't browse the web or ping anything
-
-You probably don't have DNS set up. See step 6.
-
------------------------------------------------------------------------------
-C) Can't compile PPPoE
-
-I have only tested compilation on 2.2-kernel machines. Make sure you have
-"make", the C compiler and all development header files installed.
-
------------------------------------------------------------------------------
-D) pppd complains about (i) "unknown option pty" or (ii) "pty option precludes
- specifying device name"
-
-(i) Your pppd is too old. You need at least 2.3.7.
-(ii) Your /etc/ppp/options file is not empty. Empty it!
-
------------------------------------------------------------------------------
-E) pppoe dies with the log message "Message too long"
-
-You set the MTU of the Ethernet interface connected to the ADSL modem
-to less than 1500. Don't do that.
-
------------------------------------------------------------------------------
-F) Internal hosts can't see the Internet
-
-Do you have masquerading set up? I can't help you in great detail, but
-see the IPCHAINS-HOWTO and the IP-Masquerade mini-HOWTO.
-
------------------------------------------------------------------------------
-G) Authentication fails
-
-Make sure you have the right secret in /etc/ppp/pap-secrets. Your ISP
-may be using CHAP; it won't hurt to copy the line to /etc/ppp/chap-secrets.
-
-Also, MAKE SURE that /etc/ppp/options is EMPTY. The "adsl-connect" script
-supplies all required options on the command line; additional options
-in /etc/ppp/options may mess things up.
-
------------------------------------------------------------------------------
-H) VPN software does not work
-
-If you are using VPN software on a Windows or Linux machine with another
-Linux machine running PPPoE as the gateway, you MUST NOT use the "-m" option
-to pppoe. This alters IP packets, which will break any VPN which uses IPSec.
-In /etc/ppp/pppoe.conf, set CLAMPMSS to "no". You'll also have to reduce
-the MTU on the hosts behind the gateway to 1452.
-
------------------------------------------------------------------------------
-I) I can browse some web sites just fine, but others stall forever.
-
-There is probably a buggy router or firewall between you and the Web server.
-One possible workaround: In /etc/ppp/pppoe.conf, find the line which reads:
-
- CLAMPMSS=1412
-
-Try lowering the 1412 until it works (go down in steps of 100 or so.) Each
-time you lower the value, you have to restart your connection like this:
-
- adsl-stop; adsl-start
-
-This should work around buggy routers which do not support Path MTU discovery.
-
------------------------------------------------------------------------------
-J) Whenever I connect using ADSL, my internal LAN no longer sees the gateway
-
-You are more than likely running a 2.0.X Linux kernel. To solve this
-problem, give the Ethernet card connected to the DSL modem a fake IP
-address. For example, if eth0 is your internal LAN card and eth1 goes to
-the DSL modem, do something like this:
-
- ifconfig eth1 10.0.0.1 netmask 255.255.255.0
-
-(You may have to choose a different IP address; experiment.)
------------------------------------------------------------------------------
-K) How can I run a script every time I connect and get a new IP address?
-
-Put the script in /etc/ppp/ip-up. See the pppd(8) man page.
------------------------------------------------------------------------------
-L) Nothing works!
-
-You may need to put your Ethernet card in half-duplex, 10Mb/s mode to
-work with the DSL modem. You may have to run a DOS program to do this,
-or pass special parameters to the Linux driver.
-
-Some providers object to attempts to set the MRU or MTU. Try removing
-"mtu 1492 mru 1492" from PPP_STD_OPTIONS in the adsl-connect script.
-This problem has been seen with an ISP in Hong Kong.
-
-Your DSL provider may be using non-standard PPPoE frames or require
-something special in the Service-Name field. If you have two computers,
-you can try sniffing out these values with the "pppoe-sniff" program.
-Type "man pppoe-sniff" for details. If you don't have two computers,
-you'll have to ask your DSL provider if it uses non-standard PPPoE frames
-or special Service-Name fields. Good luck getting an answer...
-
-If pppoe-sniff indicates that nothing is amiss, make sure the Ethernet
-card associated with the ADSL modem does NOT have a valid IP address.
-(NOTE: For 2.0 kernels, you may have to give it a fake IP address
-which is not on your internal subnet. Something like 192.168.42.42
-might work if you are not using 192.168.42.*)
-
-If you are using synchronous PPP on a slow machine, try switching to
-asynchronous PPP.
-
-Make sure no entries in the routing table go through the Ethernet card
-connected to the ADSL modem. You might want to add these lines in
-adsl-connect:
-
- ifconfig ethx down
- ifconfig ethx up mtu 1500
-
-which should reset things to sane values.
-
-#######################################################################
-# WHEN ALL ELSE FAILS: #
-#######################################################################
-
-If you are completely unable to connect, run the adsl-start script in
-debugging mode. If you are using bash as your shell (if you don't
-know what your shell is, it's probably bash), type this:
-
- DEBUG=1 adsl-start
-
-In tcsh or csh, use:
-
- setenv DEBUG 1; adsl-start
-
-Then follow the instructions to mail the debugging file to me. PLEASE
-DON'T DO THIS until you have exhausted all other avenues; rp-pppoe is
-free software and it costs me time and money to help people with
-problems. While I don't mind doing this, I do mind it if you don't
-make an effort to fix the problem yourself first.
-
-WARNING: If you run adsl-start in debugging mode and you manage to
-connect, your connection will be extremely slow and huge amounts of
-data will quickly fill your /tmp directory. Do not use debugging mode
-unless you really cannot get your connection to work.
-
-Be aware that debugging mode produces hex dumps which potentially reveal
-your user name and password. If the debugging output includes packets
-labeled "PPPOE Session", you may wish to remove these packets from the
-dump before mailing it to me.
diff --git a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE b/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE
deleted file mode 100644
index 454c4b870..000000000
--- a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE
+++ /dev/null
@@ -1,39 +0,0 @@
-RP-PPPoE now supports kernel-mode PPPoE on Linux kernels 2.4.x. However,
-the default "./go" build procedure does not make kernel-mode support.
-
-Here's what you need to do:
-
-1) Download Michal Ostrowski's patched version of pppd which supports
-a PPPoE plugin. The latest version as of this writing is
-at http://www.math.uwaterloo.ca/~mostrows/ in
-http://www.math.uwaterloo.ca/~mostrows/ppp-2.4.0-pppoe4.tgz. It is
-also mirrored at http://www.roaringpenguin.com/pppoe/
-
-2) Unpack that version of pppd and build and install it.
-
-3) In the rp-pppoe directory, change to src/ and type:
-
- ./configure --enable-plugin=/path/to/ppp-tree
-
-Here, /path/to/ppp-tree is where you unpacked the pppd software. It
-should be the directory named ppp-2.4.0.pppoe
-
-4) Type make; make install
-
-5) Edit /etc/ppp/pppoe.conf to include this line:
-
- LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
-
-6) Make sure your kernel was built with support for PPP, PPPOX and that
-all modules are locatable by modprobe. Make sure you have a /dev/ppp
-device:
-
- mknod /dev/ppp c 108 0
-
-After that, adsl-start should use kernel-mode PPPoE.
-
-This code is experimental and unsupported. Use at your own risk.
-
---
-David F. Skoll <dfs@roaringpenguin.com>
-
diff --git a/mdk-stage1/rp-pppoe/doc/LICENSE b/mdk-stage1/rp-pppoe/doc/LICENSE
deleted file mode 100644
index 9ed341535..000000000
--- a/mdk-stage1/rp-pppoe/doc/LICENSE
+++ /dev/null
@@ -1,339 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 675 Mass Ave, Cambridge, MA 02139, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- Appendix: How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) 19yy <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) 19yy name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/mdk-stage1/rp-pppoe/doc/PROBLEMS b/mdk-stage1/rp-pppoe/doc/PROBLEMS
deleted file mode 100644
index f0b7d7d59..000000000
--- a/mdk-stage1/rp-pppoe/doc/PROBLEMS
+++ /dev/null
@@ -1,3 +0,0 @@
-Problems?
-
-See the last section of HOW-TO-CONNECT.
diff --git a/mdk-stage1/rp-pppoe/go b/mdk-stage1/rp-pppoe/go
deleted file mode 100755
index 305ac9ee4..000000000
--- a/mdk-stage1/rp-pppoe/go
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# go
-#
-# Quick-start shell script to set up ADSL
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# Figure out directory of script
-MYDIR=`dirname $0`
-cd $MYDIR/src
-
-echo "Running ./configure..."
-./configure
-if [ "$?" != 0 ] ; then
- echo "Oops! It looks like ./configure failed."
- exit 1
-fi
-
-echo "Running make..."
-make
-if [ "$?" != 0 ] ; then
- echo "Oops! It looks like make failed."
- exit 1
-fi
-
-echo "Running make install..."
-make install
-
-if [ "$?" != 0 ] ; then
- echo "Oops! It looks like make install failed."
- exit 1
-fi
-
-for i in a a a a a a a a a a a a a a a a a a a a a a a a a a a a ; do
- echo ""
-done
-
-sh ../scripts/adsl-setup
diff --git a/mdk-stage1/rp-pppoe/go-gui b/mdk-stage1/rp-pppoe/go-gui
deleted file mode 100755
index ddce984fd..000000000
--- a/mdk-stage1/rp-pppoe/go-gui
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# go-gui
-#
-# Quick-start shell script to set up ADSL and GUI wrapper
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# GUI only works on Linux
-if test "`uname`" != "Linux" ; then
- echo "Sorry, the GUI only works on Linux."
- exit 1
-fi
-
-# Figure out directory of script
-MYDIR=`dirname $0`
-cd $MYDIR/src
-
-echo "Running ./configure..."
-./configure
-if [ "$?" != 0 ] ; then
- echo "Oops! It looks like ./configure failed."
- exit 1
-fi
-
-echo "Running make..."
-make
-if [ "$?" != 0 ] ; then
- echo "Oops! It looks like make failed."
- exit 1
-fi
-
-echo "Running make install..."
-make install
-
-if [ "$?" != 0 ] ; then
- echo "Oops! It looks like make install failed."
- exit 1
-fi
-
-echo "Building GUI wrapper..."
-cd ../gui
-make
-if [ "$?" != 0 ] ; then
- echo "Oops! It looks like make failed."
- exit 1
-fi
-
-echo "Installing GUI..."
-make install
-
-if [ "$?" != 0 ] ; then
- echo "Oops! It looks like make install failed."
- exit 1
-fi
-
-# Install entry in KDE menu
-if test -n "$KDEDIR" ; then
- echo "Installing KDE menu entry Internet : TkPPPoE..."
- mkdir -p "$KDEDIR/share/applnk/Internet"
- cat <<EOF > "$KDEDIR/share/applnk/Internet/tkpppoe.kdelnk"
-# KDE Config File
-[KDE Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-
-# Install entry in GNOME menus
-GNOMEDIR=`gnome-config --datadir 2>/dev/null`
-if test -n "$GNOMEDIR" ; then
- echo "Installing GNOME menu entry Internet : TkPPPoE..."
- mkdir -p "$GNOMEDIR/gnome/apps/Internet"
-cat <<EOF > "$GNOMEDIR/gnome/apps/Internet/tkpppoe.desktop"
-[Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-echo "Running GUI configuration tool..."
-tkpppoe &
-exit 0
diff --git a/mdk-stage1/rp-pppoe/gui/Makefile.in b/mdk-stage1/rp-pppoe/gui/Makefile.in
deleted file mode 100644
index a9b0844c0..000000000
--- a/mdk-stage1/rp-pppoe/gui/Makefile.in
+++ /dev/null
@@ -1,64 +0,0 @@
-# @configure_input@
-#***********************************************************************
-#
-# Makefile
-#
-# Makefile for GUI for Roaring Penguin's Linux user-space PPPoE client.
-#
-# Copyright (C) 2001 Roaring Penguin Software Inc.
-#
-# This program may be distributed according to the terms of the GNU
-# General Public License, version 2 or (at your option) any later version.
-#
-# $Id$
-#***********************************************************************
-DEFINES=
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-mandir=@mandir@
-install=@INSTALL@
-install_dir=@INSTALL@ -d
-sbindir=@sbindir@
-bindir=@bindir@
-
-ADSL_START_PATH=@sbindir@/adsl-start
-ADSL_STOP_PATH=@sbindir@/adsl-stop
-ADSL_STATUS_PATH=@sbindir@/adsl-status
-
-PATHS='-DADSL_START_PATH="$(ADSL_START_PATH)"' '-DADSL_STOP_PATH="$(ADSL_STOP_PATH)"' '-DADSL_STATUS_PATH="$(ADSL_STATUS_PATH)"'
-
-CFLAGS= @CFLAGS@ $(DEFINES) $(PATHS)
-
-all: pppoe-wrapper
- @echo ""
- @echo "Type 'make install' as root to install the software."
-
-pppoe-wrapper: wrapper.o
- @CC@ -o pppoe-wrapper wrapper.o
-
-wrapper.o: wrapper.c
- @CC@ $(CFLAGS) -c -o wrapper.o wrapper.c
-
-install: all
- -mkdir -p $(RPM_INSTALL_ROOT)$(sbindir)
- -mkdir -p $(RPM_INSTALL_ROOT)$(bindir)
- -mkdir -p $(RPM_INSTALL_ROOT)/etc/ppp/rp-pppoe-gui
- $(install) -m 4755 -s pppoe-wrapper $(RPM_INSTALL_ROOT)$(sbindir)
- $(install) -m 755 tkpppoe $(RPM_INSTALL_ROOT)$(bindir)
- -mkdir -p $(RPM_INSTALL_ROOT)$(mandir)/man1
- $(install) -m 644 pppoe-wrapper.1 $(RPM_INSTALL_ROOT)$(mandir)/man1
- $(install) -m 644 tkpppoe.1 $(RPM_INSTALL_ROOT)$(mandir)/man1
- -mkdir -p $(RPM_INSTALL_ROOT)/usr/share/rp-pppoe-gui
- for i in tkpppoe.html mainwin-busy.png mainwin-nonroot.png mainwin.png props-advanced.png props-basic.png props-nic.png props-options.png ; do \
- $(install) -m 644 html/$$i $(RPM_INSTALL_ROOT)/usr/share/rp-pppoe-gui; \
- done
-
-clean:
- rm -f *.o *~ pppoe-wrapper
-
-distclean: clean
- rm -f Makefile tkpppoe
-
-.PHONY: clean
-
-.PHONY: distclean
diff --git a/mdk-stage1/rp-pppoe/gui/html/tkpppoe.html b/mdk-stage1/rp-pppoe/gui/html/tkpppoe.html
deleted file mode 100644
index 51aadb895..000000000
--- a/mdk-stage1/rp-pppoe/gui/html/tkpppoe.html
+++ /dev/null
@@ -1,181 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
- <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
- <meta name="GENERATOR" content="Mozilla/4.76 [en] (X11; U; Linux 2.2.14-5.0 i686) [Netscape]">
- <title>TkPPPoE Manual</title>
-</head>
-<body text="#000000" bgcolor="#FFFFFF" link="#0000EF" vlink="#59188E" alink="#FF0000">
-
-<center>
-<h1>tkpppoe - A GUI for managing PPPoE Connections</h1>
-</center>
-
-<h1>Introduction</h1>
-
-TkPPPoE is a graphical user interface for managing PPPoE connections. It
-performs two different functions:
-<ul>
-<li>TkPPPoE lets you <em>define</em> connection properties. This step must
-be done as root.
-<li>TkPPPoE lets you <em>start and stop</em> PPPoE connections. This step
-may be done as a normal user, depending on how you configured the connection.
-</ul>
-
-<h1>Defining Connections</h1>
-
-To define connections, start TkPPPoE as root. You can do this from
-a terminal by typing <code>tkpppoe</code>, or from the KDE or GNOME menus
-by selecting <b>Internet : TkPPPoE</b>. The following window pops up:
-
-<p>
-<center><img src="mainwin.png" width="361" height="73" alt="Main Window">
-</center>
-
-<p>
-Because you have not yet defined any connections, the connection property
-window also pops up:
-
-<p>
-<center><img src="props-basic.png" width="440" height="259" alt="Connection Properties - Basic">
-</center>
-
-You can pop up the connection property window at any time by clicking
-<b>New Connection...</b> You can edit the properties of an existing
-connection by selecting the connection's name and clicking
-<b>Properties...</b>
-<h4>Basic Information</h4>
-
-Let's fill in the basic information:
-<ul>
-<li>For <b>Connection Name</b>, enter a unique name for this connection. It
-can be anything you like, but must contain only letters, numbers, underscores
-or dashes. In particular, it can't contain spaces. If you have only one
-PPPoE connection, a good name is <b>Default</b>.
-<li>For <b>User Name</b>, enter the user name supplied by your ISP. Enter
-only the user name; do not enter an "@isp.com" part.
-<li>For <b>Network</b>, you may have to enter your ISP's domain name.
-(For example, <b>isp.com</b>.) Some DSL providers add this to your user
-name; others do not. You may have to experiment a bit. The two most likely
-choices are your ISP's domain name, or blank. Try both.
-<li>For <b>Password</b>, enter the password your ISP provided you with.
-</ul>
-
-<h4>NIC and DNS</h4>
-Click on the <b>NIC and DNS</b> tab:
-
-<p>
-<center><img src="props-nic.png" width="440" height="259" alt="Connection Properties - NIC and DNS"></center>
-<p>
-<ul>
-<li>For <b>Ethernet Interface</b>, enter the Ethernet interface connected
-to the DSL modem. It is something like <b>eth0</b> or <b>eth1</b>. Click
-on <b>...</b> to browse a list of detected Ethernet interfaces.
-<li>For <b>DNS Setup</b>, you have three options:
-<ol>
-<li><b>From Server</b> means that the system will obtain DNS information from
-the PPPoE server. This is the correct choice for most ISPs.
-<li><b>Specify</b> means that you will enter the IP addresses of your DNS
-servers manually. In this case, enter the addresses in the <b>Primary DNS</b>
-and <b>Secondary DNS</b> entries.
-<li><b>Do not Adjust</b> means that you want RP-PPPoE to leave your
-DNS setup alone. Use this if you are running your own caching DNS server
-or know that you don't want the DNS setup touched.
-</ol>
-</ul>
-
-<h4>Options</h4>
-Click on the <b>Options</b> tab:
-
-<p>
-<center><img src="props-options.png" width="440" height="259" alt="Connection Properties - Options"></center>
-<p>
-<ul>
-<li>If you want ordinary users to be able to start and stop this connection,
-enable <b>Allow use by non-root users</b>. If you do not enable this,
-non-root users will be able to monitor the connection, but not control it.
-<li>If you want to use synchronous PPP, enable <b>Use synchronous PPP</b>.
-This is recommended as it conserves CPU usage, but may not work on some
-(misconfigured) Linux kernels.
-<li>For <b>Firewalling</b>, you have three options:
-<ol>
-<li><b>Stand-Alone</b> installs a simple firewall ruleset for stand-alone
-machines. Use this if you have only a single computer connected to the DSL
-modem.
-<li><b>Masquerading</b> installs a simple firewall ruleset for using
-your Linux computer as an Internet sharing device. If you have two Ethernet
-cards, you can connect one card to the DSL modem and the other to an
-internal LAN. The masquerading firewall ruleset lets internal machines
-share the DSL connection.
-<li><b>None</b>. If you already have your own firewall rules, or you wish
-to run servers on your machine, select None. This is <em>not recommended</em>
-unless you take steps to secure your machine, and know what you are doing.
-</ol>
-</ul>
-
-<h4>Advanced</h4>
-Click on the <b>Advanced</b> tab:
-
-<p>
-<center><img src="props-advanced.png" width="440" height="259" alt="Connection Properties - Advanced"></center>
-<p>
-
-In most cases, you can leave <b>AC-Name</b> and <b>Service-Name</b> blank.
-In some cases, your ISP may require you to enter information in these fields;
-contact your ISP for more information.
-
-<h1>Controlling Connections</h1>
-For these examples, run <code>tkpppoe</code> as a normal user (not root).
-The main window appears like this:
-
-<p>
-<center><img src="mainwin-nonroot.png" width="206" height="73" alt="Main Window - Non-root">
-</center>
-<p>
-<ul>
-<li>To start a connection, press <b>Start</b>. The two LEDs flash red
-and grey. If the connection is established, they turn green.
-<li>To stop a connection, press <b>Stop</b>.
-</ul>
-
-<p>The two rectangles to the right of the connection name are the
-<em>status LEDs</em>. The top LED corresponds to transmitted data and
-the bottom to received. The LEDs are colored as follows:
-<ul>
-<li>Grey -- connection is not established.
-<li>Flashing red/grey -- connection is being started.
-<li>Green -- connection is up, but idle.
-<li>Yellow -- connection is up and data is being sent or received.
-<li>Red -- connection has been lost, but the system is trying to reestablish it.
-</ul>
-
-<p>
-When a connection is established, two graphs appear:
-
-<p>
-<center><img src="mainwin-busy.png" width="206" height="73" alt="Main Window - Established Connection">
-</center>
-<p>
-
-The left (red) graph shows transmitted packets and the average
-transmission speed (in bits per second) over the sample time. The
-right (green) graph shows received packets.
-
-<h1>Miscellaneous Information</h1>
-<ul>
-<li>The connection menu has an entry called <b>User's Manual</b> which
-will pop up this user manual (if you have Netscape installed.)
-<li>You can define multiple PPPoE connections, but you should not use
-more than one simultaneuously unless you feel comfortable editing scripts
-and setting up routing tables. By default, TkPPPoE tries to add a default
-route for connections. This does not work well with multiple simultaneous
-connections.
-<li>If you exit from TkPPPoE, connections which are up remain up. You
-have to explicitly stop connections if you want them terminated.
-</ul>
-<hr>
-<a href="http://www.roaringpenguin.com/pppoe/">TkPPPoE</a> is Copyright 2001 by <a href="http://www.roaringpenguin.com">Roaring Penguin Software Inc</a> and
-is licensed under the GNU General Public License.
-<p>Screenshots show TkPPPoE running under the <a href="http://www.xfce.org">XFCE</a> desktop, a lightweight UNIX and Linux desktop.
-</body>
-</html>
diff --git a/mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1 b/mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1
deleted file mode 100644
index 4fbf2bce2..000000000
--- a/mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1
+++ /dev/null
@@ -1,45 +0,0 @@
-.\" $Id$
-.TH PPPOE-WRAPPER 1 "26 February 2001"
-.UC 4
-.SH NAME
-pppoe-wrapper \- SUID wrapper for starting and stopping PPPoE connections.
-.SH SYNOPSIS
-.B pppoe-wrapper start linkname
-.P
-.B pppoe-wrapper stop linkname
-.P
-.B pppoe-wrapper status linkname
-
-.SH DESCRIPTION
-\fBpppoe-wrapper\fR is a small SUID program which allows non-root users
-to start and stop PPPoE links. It operates as follows:
-
-.TP
-.B o
-First, \fIlinkname\fR is sanity-checked. Too-long names and names containing
-illegal characters are rejected.
-
-.TP
-.B o
-Second, \fBpppoe-wrapper\fR opens the file \fB/etc/ppp/rp-pppoe-gui/\fR\fIlinkname\fR for reading. If that file does not contain the line:
-.nf
-
- NONROOT=OK
-
-.fi
-then \fBpppoe-wrapper\fR fails.
-
-.TP
-.B o
-Otherwise, \fBpppoe-wrapper\fR runs \fBadsl-start\fR, \fBadsl-stop\fR or
-\fBadsl-status\fR with the above filename as its single argument.
-
-.SH AUTHOR
-\fBpppoe-wrapper\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-status(8), tkpppoe(1)
-
-
diff --git a/mdk-stage1/rp-pppoe/gui/tkpppoe.1 b/mdk-stage1/rp-pppoe/gui/tkpppoe.1
deleted file mode 100644
index 183476568..000000000
--- a/mdk-stage1/rp-pppoe/gui/tkpppoe.1
+++ /dev/null
@@ -1,36 +0,0 @@
-.\" $Id$
-.TH TKPPPOE 1 "26 February 2001"
-.UC 4
-.SH NAME
-tkpppoe \- Graphical interface for controlling rp-pppoe
-.SH SYNOPSIS
-.B tkpppoe
-
-.SH DESCRIPTION
-\fBtkpppoe\fR is a graphical program for controlling PPPoE links.
-It works with the RP-PPPoE package and has its own HTML manual.
-
-.SH FILES
-
-.TP
-.B /etc/ppp/rp-pppoe-gui/connection-info
-Contains connection information. This file is not human-editable.
-
-.TP
-.B /etc/ppp/rp-pppoe-gui/passwd
-Contains passwords for each connection. This file is not human-editable.
-
-.TP
-.B /etc/ppp/rp-pppoe-gui/conf.*
-These configuration files are used by \fBadsl-start\fR. They are
-generated anew by \fBtkpppoe\fR each time a change is made to a
-connection's properties.
-
-.SH AUTHOR
-\fBtkpppoe\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), pppoe-wrapper(8).
-
diff --git a/mdk-stage1/rp-pppoe/gui/tkpppoe.in b/mdk-stage1/rp-pppoe/gui/tkpppoe.in
deleted file mode 100755
index 37dbf8cc1..000000000
--- a/mdk-stage1/rp-pppoe/gui/tkpppoe.in
+++ /dev/null
@@ -1,2891 +0,0 @@
-#!/bin/sh
-# -*-Mode: TCL;-*-
-
-#--------------------------------------------------------------
-# tkpppoe
-#
-# A graphical front-end for configuring and using rp-pppoe.
-#
-# Copyright (C) 2001 by Roaring Penguin Software Inc.
-# This file may be distributed under the terms of the GNU General Public
-# License, Version 2, or (at your option) any later version.
-#
-# The "Roaring Penguin" logo is a trademark of Roaring Penguin Software Inc.
-#
-# http://www.roaringpenguin.com
-#
-#--------------------------------------------------------------
-
-# $Id$
-
-# the next line restarts using wish \
-umask 022; \
-exec wish "$0" "$@" || clear; echo "*****"; echo "Cannot find 'wish' -- you need Tcl/Tk installed to run this program"; exit 1
-
-# Set app name
-tk appname TkPPPoE
-
-# Set this to one if you want to allow multiple instances of TkPPPoE
-set AllowMultipleInstances 0
-
-# Check for other instances
-if {"[tk appname]" != "TkPPPoE"} {
- # Must be another instance running...
- if {!$AllowMultipleInstances} {
- send TkPPPoE AnotherInstance
- exit 0
- }
-}
-
-# Location of config directory
-set ConfigDir /etc/ppp/rp-pppoe-gui
-
-# Are we running as root?
-set Admin 0
-
-# Location of connection info file
-set ConnectionInfoFile [file join $ConfigDir connection-info]
-
-# Location of password file
-set PasswordFile [file join $ConfigDir passwd]
-
-# Location of "already run" file
-set AlreadyRunFile [file join $ConfigDir gui-already-run]
-
-# Connection information
-set ConnectionInfo {}
-
-# Connection options
-set OPTS(nonroot) 0
-set OPTS(sync) 1
-
-# Location of wrapper
-set Wrapper "@WRAPPER@"
-
-# Timer token for UpdateConnectionState
-set UpdateToken {}
-
-# Update interval in milliseconds
-set UpdateInterval 500
-
-# Packet counters for signalling activity
-set Packets(in) 0
-set Packets(out) 0
-set Bytes(in) 0
-set Bytes(out) 0
-set MeasureTime 0
-
-# Set up some options to make it look better
-option add *Button.borderWidth 1
-option add *Button.Pad 1
-option add *Menubutton.borderWidth 1
-option add *Menubutton.Pad 1
-option add *Entry.Background white
-
-# Array holding help strings for windows
-array set HelpData {}
-
-bind HelpWin <Enter> "HelpWindowEntered %W"
-bind HelpWin <Leave> "HelpWindowLeft %W"
-
-proc AnotherInstance {} {
- wm deiconify .
- raise .
-}
-
-#***********************************************************************
-# %PROCEDURE: HelpWindowEntered
-# %ARGUMENTS:
-# w -- window
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Looks for procedure in HelpData; evals it if found.
-#***********************************************************************
-proc HelpWindowEntered { w } {
- global HelpData
- if {[info exists HelpData($w)]} {
- set cmd "$HelpData($w) Enter"
- uplevel #0 $cmd
- }
-}
-
-#***********************************************************************
-# %PROCEDURE: HelpWindowLeft
-# %ARGUMENTS:
-# w -- window
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Looks for procedure in HelpData; evals it if found.
-#***********************************************************************
-proc HelpWindowLeft { w } {
- global HelpData
- if {[info exists HelpData($w)]} {
- set cmd "$HelpData($w) Leave"
- uplevel #0 $cmd
- }
-}
-
-#***********************************************************************
-# %PROCEDURE: RegisterHelpWindow
-# %ARGUMENTS:
-# w -- window we need help about
-# helptext -- the help text
-# win -- window in which to put help messages
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Sets things up so help text appears in "$win" when mouse enters "$w"
-#***********************************************************************
-proc RegisterHelpWindow {w helptext win} {
- global HelpData
- set tags [bindtags $w]
- if {[lsearch -exact $tags HelpWin] < 0} {
- lappend tags HelpWin
- bindtags $w $tags
- }
- set HelpData($w) [list HelpInTextWin $helptext $win]
-}
-
-#***********************************************************************
-# %PROCEDURE: HelpInTextWin
-# %ARGUMENTS:
-# text -- help text
-# tw -- window in which to write text
-# what -- one of "Enter" or "Leave"
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Clears out $tw; if $what is "Enter", puts $text in $tw.
-#***********************************************************************
-proc HelpInTextWin {text tw what} {
- $tw configure -state normal
- $tw delete 1.0 end
- if {"$what" == "Enter"} {
- $tw insert end $text
- }
- $tw configure -state disabled
-}
-
-
-#***********************************************************************
-# %PROCEDURE: drawLogo
-# %ARGUMENTS:
-# c -- canvas to draw logo in
-# bg -- background color of canvas
-# pencolor -- color of the word "Penguin"
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Draws Roaring Penguin logo in a Tcl canvas
-#***********************************************************************
-proc drawLogo { c bg {pengcolor #6699cc} } {
- $c create polygon 372.249 5.182 361.23 5.519 \
- 346.164 8.892 316.482 20.023 305.463 17.774 296.468 \
- 19.573 288.935 24.97 282.864 33.177 267.348 55.102 \
- 254.531 77.814 236.204 125.26 225.635 174.844 \
- 221.026 226.113 213.605 228.025 208.658 232.634 \
- 225.523 240.28 250.708 243.316 282.752 242.416 \
- 320.079 238.818 330.985 193.17 338.181 146.735 \
- 338.743 99.963 335.483 76.577 329.524 53.191 345.602 \
- 48.131 353.135 45.995 359.768 41.048 342.679 43.184 \
- 324.689 40.036 334.583 28.905 348.3 18.674 372.249 \
- 5.182 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create line 372.249 5.182 361.23 5.519 \
- 346.164 8.892 316.482 20.023 305.463 17.774 296.468 \
- 19.573 288.935 24.97 282.864 33.177 267.348 55.102 \
- 254.531 77.814 236.204 125.26 225.635 174.844 \
- 221.026 226.113 213.605 228.025 208.658 232.634 \
- 225.523 240.28 250.708 243.316 282.752 242.416 \
- 320.079 238.818 330.985 193.17 338.181 146.735 \
- 338.743 99.963 335.483 76.577 329.524 53.191 345.602 \
- 48.131 353.135 45.995 359.768 41.048 342.679 43.184 \
- 324.689 40.036 334.583 28.905 348.3 18.674 372.249 \
- 5.182 -tags logo
-
- $c create polygon 298.605 109.632 290.734 \
- 159.328 282.752 182.939 271.958 205.65 262.851 \
- 171.133 263.75 138.752 264.537 164.5 271.958 192.833 \
- 286.687 157.192 298.605 109.632 -fill #ffffff \
- -outline {} -width 1 -tags logo
-
- $c create line 298.605 109.632 290.734 159.328 \
- 282.752 182.939 271.958 205.65 262.851 171.133 \
- 263.75 138.752 264.537 164.5 271.958 192.833 286.687 \
- 157.192 298.605 109.632 -tags logo
-
- $c create polygon 312.546 30.592 315.132 35.876 \
- 310.747 39.586 308.161 34.414 312.546 30.592 -fill \
- #ffffff -outline {} -width 1 -tags logo
-
- $c create line 312.546 30.592 315.132 35.876 \
- 310.747 39.586 308.161 34.414 312.546 30.592 -tags logo
-
- $c create polygon 328.624 54.427 322.665 58.7 \
- 314.458 61.286 289.16 59.15 284.55 74.665 285.338 \
- 90.181 303.214 98.951 308.499 106.259 310.523 \
- 116.378 305.913 130.208 312.771 141.563 308.049 \
- 167.76 299.729 192.158 279.041 238.593 313.558 \
- 233.871 327.388 185.75 335.033 139.989 335.82 96.253 \
- 328.624 54.427 -fill #ffffff -outline {} -width 1 -tags logo
-
- $c create line 328.624 54.427 322.665 58.7 \
- 314.458 61.286 289.16 59.15 284.55 74.665 285.338 \
- 90.181 303.214 98.951 308.499 106.259 310.523 \
- 116.378 305.913 130.208 312.771 141.563 308.049 \
- 167.76 299.729 192.158 279.041 238.593 313.558 \
- 233.871 327.388 185.75 335.033 139.989 335.82 96.253 \
- 328.624 54.427 -tags logo
-
- $c create polygon 53.837 185.412 54.399 185.862 \
- 53.837 188.223 54.399 188.673 53.837 188.673 53.837 \
- 189.572 53.837 190.472 53.387 191.034 52.938 192.833 \
- 50.577 195.644 49.677 196.656 49.677 197.105 48.215 \
- 198.455 47.316 198.904 46.866 198.904 44.505 200.816 \
- 43.606 200.366 42.594 201.265 42.144 201.715 41.245 \
- 202.277 40.795 202.727 40.345 202.277 39.783 202.277 \
- 36.972 203.177 36.522 203.177 36.073 203.177 35.623 \
- 203.627 34.723 203.627 34.161 203.627 34.161 204.076 \
- 30.901 204.526 28.54 205.538 26.291 205.088 25.729 \
- 205.088 24.829 205.088 24.38 204.526 23.93 204.526 \
- 23.48 204.526 22.918 205.088 22.918 206.437 22.918 \
- 206.887 22.918 207.337 22.468 207.337 22.468 208.798 \
- 22.018 209.248 22.018 211.16 22.018 211.609 21.569 \
- 213.521 21.119 215.769 21.569 216.781 20.669 218.13 \
- 20.669 219.592 20.669 220.042 20.107 220.941 20.107 \
- 221.953 20.107 223.752 19.657 225.664 19.208 226.113 \
- 19.657 227.013 18.308 230.835 17.858 240.167 17.296 \
- 248.15 17.296 249.05 16.846 250.062 15.947 250.062 \
- 15.048 250.062 15.048 250.511 12.686 251.86 12.237 \
- 251.86 11.675 251.411 11.675 250.511 11.675 246.689 \
- 11.225 245.339 11.225 243.878 10.775 240.617 11.225 \
- 239.268 11.225 238.818 10.775 238.256 10.325 237.357 \
- 10.325 236.007 9.876 232.634 9.876 231.735 9.876 \
- 231.285 9.876 230.835 9.876 230.386 9.876 229.824 \
- 9.426 229.374 9.426 226.113 9.876 226.113 9.876 \
- 225.664 9.426 224.202 9.426 223.752 9.426 223.302 \
- 10.325 221.953 9.426 220.941 9.426 219.592 9.426 \
- 219.142 9.426 218.58 9.426 217.681 9.426 217.231 \
- 9.426 216.781 8.864 216.332 8.864 214.42 8.864 \
- 213.97 8.414 213.521 8.414 210.148 8.414 209.248 \
- 7.964 207.899 8.414 205.988 8.414 204.526 7.065 \
- 201.265 7.515 200.816 9.426 201.715 10.325 201.265 \
- 10.775 200.816 10.775 198.904 11.225 198.005 11.225 \
- 197.555 10.775 197.555 9.876 196.094 9.426 194.744 \
- 7.515 194.295 6.615 193.845 6.053 193.845 5.153 \
- 193.283 3.804 191.484 3.804 190.022 3.804 189.572 \
- 3.804 189.123 3.242 188.673 3.242 186.762 3.804 \
- 185.412 4.254 184.85 4.704 184.4 7.964 180.24 10.325 \
- 178.779 11.225 178.779 12.237 177.879 14.036 176.98 \
- 15.497 175.968 21.569 173.607 22.918 173.157 23.48 \
- 173.157 24.38 172.707 24.829 172.707 29.102 171.808 \
- 29.551 171.808 30.001 171.358 31.35 170.796 31.913 \
- 171.358 32.362 170.796 39.783 171.358 40.345 170.796 \
- 42.144 171.358 47.766 174.619 48.778 176.418 49.227 \
- 176.418 49.677 176.98 50.127 176.98 51.588 178.329 \
- 52.038 179.228 52.488 180.69 52.038 181.14 52.038 \
- 181.59 52.488 182.039 52.938 182.039 53.387 182.601 \
- 53.837 183.051 53.837 183.501 53.837 185.412 -fill \
- $pengcolor -outline {} -width 1 -tags logo
-
- $c create polygon 42.594 222.853 43.156 221.953 \
- 41.694 222.403 39.783 224.202 39.783 224.764 39.783 \
- 225.214 40.345 225.214 41.245 224.202 41.694 223.752 \
- 42.594 222.853 -fill $pengcolor -outline {} -width 1 -tags logo
-
- $c create polygon 58.559 234.096 59.009 234.096 \
- 59.009 234.546 58.559 234.995 58.559 235.445 57.21 \
- 236.907 56.648 237.806 52.938 241.067 52.038 241.629 \
- 52.038 242.079 51.026 242.529 50.577 242.978 50.127 \
- 242.978 49.227 244.44 45.405 246.239 44.055 246.689 \
- 43.606 246.689 43.606 247.251 42.144 247.251 41.694 \
- 247.7 40.795 247.7 38.434 248.15 36.522 248.15 \
- 35.173 247.7 34.161 246.689 33.711 246.239 32.812 \
- 244.44 32.362 241.629 32.812 239.718 32.812 239.268 \
- 33.711 234.995 36.522 229.824 35.623 228.474 35.623 \
- 227.013 36.522 225.664 37.534 224.202 38.883 222.853 \
- 41.694 220.492 42.594 219.592 43.156 219.592 43.606 \
- 219.142 45.405 217.681 45.967 217.681 46.416 217.231 \
- 48.778 215.769 52.038 214.87 53.387 214.42 54.849 \
- 214.87 55.299 214.87 56.198 215.769 56.198 217.681 \
- 56.198 218.58 54.399 221.953 53.837 222.853 53.837 \
- 223.302 53.387 223.752 50.577 226.113 49.677 226.563 \
- 47.316 228.474 43.156 230.386 41.245 230.835 40.795 \
- 230.835 40.345 230.835 39.333 230.835 38.883 230.835 \
- 38.883 229.824 39.783 229.374 40.795 228.474 41.694 \
- 228.025 42.594 227.575 45.967 227.013 46.866 226.563 \
- 50.127 224.764 51.588 223.302 52.488 221.953 52.488 \
- 220.492 52.488 219.142 51.026 218.13 49.677 218.13 \
- 48.778 218.13 47.766 219.142 47.316 219.142 47.316 \
- 219.592 46.866 219.592 45.967 220.941 44.505 221.953 \
- 44.055 222.403 43.606 222.853 42.594 223.752 41.694 \
- 225.664 41.245 225.664 41.245 226.113 40.345 226.563 \
- 39.333 227.575 39.333 228.474 38.434 229.374 36.522 \
- 233.197 35.623 236.457 35.623 237.357 35.623 238.256 \
- 35.173 241.067 35.623 242.079 36.522 243.428 37.534 \
- 243.878 37.984 244.44 38.434 244.89 38.883 244.89 \
- 39.783 245.339 43.156 245.339 45.967 244.44 49.227 \
- 242.529 50.127 241.629 50.577 241.067 54.399 238.818 \
- 54.399 238.256 54.399 237.806 56.198 236.907 58.559 \
- 234.096 -fill $pengcolor -outline {} -width 1 -tags logo
-
- $c create polygon 92.289 248.6 92.739 249.05 \
- 92.289 249.05 91.84 249.05 90.94 248.6 90.378 248.6 \
- 89.478 247.7 89.029 247.251 88.129 246.689 87.117 \
- 245.789 85.768 244.89 85.318 244.44 85.768 244.44 \
- 85.318 242.529 84.756 242.079 84.756 240.617 84.756 \
- 240.167 84.756 239.718 84.756 239.268 83.857 236.457 \
- 83.407 234.096 83.407 233.197 83.407 231.735 83.407 \
- 223.302 83.407 221.391 82.957 220.941 82.508 221.953 \
- 80.596 226.113 80.146 226.563 80.146 227.013 79.697 \
- 228.025 79.135 228.474 79.697 228.474 76.324 234.096 \
- 75.874 234.995 75.424 236.457 74.975 236.457 74.975 \
- 236.907 74.975 237.357 74.075 239.268 73.513 239.718 \
- 73.063 240.167 72.613 241.067 72.164 242.529 71.714 \
- 242.529 71.714 243.878 70.252 245.789 69.803 246.689 \
- 68.903 246.689 68.903 247.251 67.891 247.7 66.542 \
- 247.7 66.092 247.7 65.643 247.7 65.08 247.251 65.08 \
- 246.689 65.08 245.789 64.631 242.079 65.08 242.079 \
- 64.631 241.629 65.08 241.067 65.08 238.818 64.631 \
- 237.806 64.631 236.457 64.631 234.546 64.631 233.197 \
- 64.631 232.634 64.631 232.185 64.631 231.735 64.631 \
- 228.924 64.631 227.575 64.631 225.664 64.631 225.214 \
- 64.631 224.764 64.631 223.302 64.631 217.231 65.08 \
- 216.332 65.643 215.769 69.803 214.87 70.252 215.32 \
- 70.252 216.332 70.252 217.681 70.252 218.58 69.803 \
- 219.142 69.803 220.492 69.353 220.941 69.353 221.391 \
- 68.903 221.953 68.903 225.664 68.453 226.563 68.453 \
- 228.025 68.453 228.474 67.891 228.924 67.891 230.835 \
- 68.453 236.457 68.453 237.806 68.453 238.818 68.453 \
- 240.617 68.453 241.067 68.903 241.067 68.903 241.629 \
- 69.353 241.629 70.702 241.067 70.702 240.617 71.264 \
- 240.167 71.264 239.268 72.164 238.256 73.063 236.457 \
- 74.525 234.546 74.975 233.197 76.324 230.835 77.336 \
- 229.824 78.235 227.575 78.235 227.013 78.685 226.563 \
- 78.685 225.664 79.135 225.214 79.697 224.764 79.697 \
- 224.202 80.146 222.403 81.046 220.941 81.945 217.681 \
- 82.957 215.769 85.318 214.87 85.768 214.87 87.567 \
- 214.42 87.567 215.769 87.117 216.332 87.567 216.781 \
- 88.129 219.592 87.567 219.592 87.567 220.492 87.567 \
- 221.391 87.567 224.764 87.567 225.664 87.567 226.113 \
- 87.117 226.113 87.117 227.575 87.567 229.374 88.579 \
- 235.445 89.029 239.268 89.029 239.718 89.029 241.067 \
- 89.478 242.529 89.478 242.978 89.928 243.878 89.928 \
- 244.44 90.378 244.89 90.94 246.239 92.289 248.6 \
- -fill $pengcolor -outline {} -width 1 -tags logo
-
- $c create polygon 117.587 220.492 118.037 \
- 222.403 117.587 222.853 117.587 224.764 116.687 \
- 226.113 116.687 227.013 116.238 228.025 114.776 \
- 229.374 113.877 231.285 112.865 231.735 109.154 \
- 234.995 106.343 236.457 105.444 237.357 103.982 \
- 237.806 103.083 238.256 102.633 238.818 102.183 \
- 238.818 101.172 239.268 99.822 239.718 98.361 \
- 239.268 97.461 239.718 96.562 239.268 96.0 238.818 \
- 95.55 238.818 94.201 236.907 94.201 235.445 94.201 \
- 233.646 94.65 233.197 94.65 232.634 95.1 232.185 \
- 95.1 231.735 95.55 231.735 96.0 230.386 97.461 \
- 228.025 97.461 227.575 98.361 226.563 99.822 224.764 \
- 101.172 223.302 101.172 222.853 102.633 221.391 \
- 103.083 220.941 104.432 219.592 103.982 218.58 \
- 103.982 217.231 103.982 216.781 103.982 215.32 \
- 104.432 214.42 103.982 210.148 103.982 209.698 \
- 103.982 209.248 104.432 208.798 104.432 207.899 \
- 104.432 205.988 104.432 205.538 104.994 203.177 \
- 104.994 202.277 104.994 201.265 104.994 200.816 \
- 104.994 200.366 104.994 199.916 105.894 199.467 \
- 106.343 198.904 106.793 198.455 107.243 198.904 \
- 108.255 198.904 108.255 199.467 108.705 199.467 \
- 108.705 202.727 108.255 204.076 108.255 205.538 \
- 108.255 205.988 107.805 205.988 107.805 206.887 \
- 107.805 209.698 107.243 210.71 106.793 212.059 \
- 106.343 214.87 106.343 215.32 106.343 215.769 \
- 105.894 217.681 106.343 217.681 106.793 217.681 \
- 107.243 217.231 108.705 215.32 109.604 215.32 \
- 110.054 214.42 110.054 213.97 110.616 213.97 110.616 \
- 214.42 111.965 214.87 112.415 214.87 112.865 215.32 \
- 114.326 216.332 116.238 217.681 116.687 218.58 \
- 117.137 219.592 117.587 220.042 117.587 220.492 \
- -fill $pengcolor -outline {} -width 1 -tags logo
-
- $c create polygon 123.658 258.944 123.658 \
- 259.394 123.658 260.293 123.658 261.755 123.658 \
- 262.654 123.658 263.104 123.209 266.364 123.209 \
- 267.376 122.759 269.175 122.309 269.737 121.859 \
- 271.087 121.859 271.536 121.859 271.986 121.297 \
- 271.986 121.297 272.548 120.847 273.448 120.398 \
- 273.448 120.398 273.897 118.486 276.259 118.037 \
- 276.708 117.587 277.608 117.137 278.17 116.687 \
- 278.17 115.675 278.62 115.675 279.069 113.427 \
- 280.419 112.865 280.981 112.415 280.981 111.965 \
- 281.43 110.054 282.33 109.154 282.33 108.705 282.78 \
- 108.255 282.78 107.805 283.229 104.994 283.792 \
- 104.432 283.792 103.982 283.792 103.533 283.792 \
- 103.083 283.792 102.633 283.792 102.183 283.792 \
- 101.172 283.792 100.722 283.792 99.822 283.792 98.81 \
- 283.792 96.562 282.33 96.0 282.78 95.1 281.88 94.201 \
- 281.43 91.84 279.969 92.289 279.519 92.289 278.62 \
- 93.751 279.069 93.751 279.519 94.201 279.519 94.65 \
- 279.969 95.1 279.969 96.0 280.981 98.81 281.88 \
- 101.172 281.88 101.621 281.88 102.633 281.88 103.083 \
- 281.88 103.533 281.88 104.432 281.43 104.994 281.88 \
- 105.444 281.43 106.793 281.43 107.805 280.981 \
- 108.705 280.419 109.154 280.419 109.604 279.969 \
- 110.054 279.969 110.616 279.969 111.066 279.519 \
- 112.865 278.17 113.427 277.608 113.877 277.608 \
- 113.877 277.158 114.326 277.158 114.326 276.708 \
- 114.776 276.259 115.226 276.259 116.238 274.347 \
- 116.687 274.347 116.687 273.897 117.587 272.998 \
- 117.587 272.548 118.037 271.986 119.498 267.826 \
- 120.398 265.015 120.398 262.204 119.948 259.843 \
- 119.948 259.394 119.948 258.944 119.498 257.482 \
- 118.486 254.222 118.037 253.772 117.587 251.86 \
- 115.675 249.05 115.226 248.6 114.776 248.15 113.877 \
- 247.251 111.965 246.239 111.515 246.239 110.616 \
- 246.239 110.054 246.239 109.154 246.239 107.243 \
- 247.251 106.343 247.251 105.444 247.7 104.994 247.7 \
- 103.083 248.15 102.183 248.6 101.621 248.6 101.172 \
- 249.05 100.722 249.499 99.822 250.062 98.361 250.062 \
- 97.461 249.499 97.012 249.499 96.562 249.05 96.562 \
- 248.6 97.012 248.15 99.822 245.789 100.272 245.339 \
- 101.621 244.44 101.621 243.878 102.183 243.428 \
- 102.633 243.428 102.633 242.978 103.982 241.629 \
- 103.982 241.067 103.982 240.617 103.982 240.167 \
- 105.444 239.268 108.705 236.907 108.705 236.457 \
- 109.154 236.457 110.054 235.445 111.066 234.546 \
- 112.415 234.096 112.865 233.646 113.427 233.646 \
- 113.877 233.646 113.877 234.096 114.326 234.995 \
- 114.776 235.445 114.776 236.457 114.326 237.357 \
- 113.427 238.818 112.415 239.268 112.415 240.167 \
- 111.965 240.167 111.515 240.617 110.054 241.629 \
- 110.054 242.079 109.604 242.529 108.705 242.978 \
- 110.054 242.978 113.427 242.079 114.326 242.529 \
- 115.226 242.978 116.687 244.44 119.048 246.689 \
- 119.498 247.7 119.498 248.15 119.948 248.6 119.948 \
- 249.05 120.398 249.05 120.398 249.499 120.847 \
- 249.499 120.847 250.062 121.297 250.511 121.297 \
- 251.411 121.859 252.31 122.759 252.872 122.759 \
- 254.222 122.759 254.671 123.658 258.494 123.658 \
- 258.944 -fill $pengcolor -outline {} -width 1 -tags logo
-
- $c create polygon 147.607 215.769 148.506 215.32 \
- 148.506 217.231 148.506 217.681 148.506 218.13 \
- 148.956 218.58 148.506 220.492 148.506 220.941 \
- 148.506 222.853 148.956 224.764 148.956 226.113 \
- 148.506 226.563 148.956 226.563 148.506 228.924 \
- 148.956 229.824 148.956 231.285 148.506 232.185 \
- 148.956 232.634 148.956 233.646 149.405 234.995 \
- 148.956 234.995 149.405 235.445 149.405 236.907 \
- 149.405 237.357 149.968 238.818 150.867 240.167 \
- 150.867 240.617 151.317 242.079 152.216 243.428 \
- 153.228 245.339 154.128 245.789 155.027 246.239 \
- 156.939 245.789 157.388 246.239 156.489 246.689 \
- 155.027 247.7 154.128 247.7 153.228 247.7 152.216 \
- 247.7 151.767 247.7 150.867 247.251 150.417 246.239 \
- 149.405 246.239 148.056 245.339 147.607 244.44 \
- 147.157 243.428 145.695 241.629 145.695 240.617 \
- 145.245 240.167 145.245 239.718 144.796 238.256 \
- 144.346 236.907 144.346 235.445 143.784 234.546 \
- 143.784 233.197 143.784 232.185 143.784 230.835 \
- 143.334 229.824 143.784 229.374 143.334 229.374 \
- 143.334 228.474 142.884 230.386 141.985 231.735 \
- 140.973 233.197 140.523 234.096 140.523 234.546 \
- 140.523 234.995 139.624 236.457 139.174 237.806 \
- 138.162 239.718 137.263 241.067 136.813 242.079 \
- 135.913 242.978 134.452 244.89 134.002 245.789 \
- 133.552 245.789 132.091 246.689 131.191 247.251 \
- 129.73 248.15 129.28 248.15 128.38 247.7 128.38 \
- 248.15 126.919 247.7 126.019 247.251 125.12 246.239 \
- 125.12 245.339 124.67 244.89 124.67 244.44 124.67 \
- 243.428 124.67 242.529 124.67 241.067 124.67 239.718 \
- 125.12 239.268 124.67 239.268 124.67 238.256 125.12 \
- 237.806 125.12 237.357 125.12 236.907 125.12 236.007 \
- 125.12 234.096 125.57 233.197 125.57 232.185 126.019 \
- 232.185 126.019 231.285 126.019 230.386 126.019 \
- 229.374 126.469 228.474 126.469 227.013 126.469 \
- 225.214 126.019 225.214 126.469 225.214 126.019 \
- 223.302 126.019 221.953 126.019 220.492 125.57 \
- 220.042 125.12 219.592 124.108 219.142 123.209 \
- 219.142 121.859 220.042 121.297 220.042 120.398 \
- 220.941 119.498 221.391 119.048 221.391 118.486 \
- 221.953 118.037 221.953 118.037 221.391 118.486 \
- 220.941 119.498 220.042 120.847 219.142 122.759 \
- 217.681 124.108 216.781 125.12 215.769 126.469 \
- 214.87 126.919 214.87 127.481 214.87 128.38 214.87 \
- 128.83 214.87 129.73 214.87 129.73 215.769 130.292 \
- 215.769 130.742 216.781 130.742 217.681 130.292 \
- 219.142 130.292 221.953 130.292 223.302 130.292 \
- 224.202 129.73 225.214 129.28 227.013 128.83 227.575 \
- 129.28 227.575 129.28 228.474 128.83 229.374 129.28 \
- 229.824 129.28 230.386 128.83 231.735 128.38 234.096 \
- 128.38 234.995 127.931 236.457 127.931 239.268 \
- 127.931 240.167 127.931 241.629 128.83 242.978 \
- 129.28 243.878 129.73 244.44 130.742 244.44 131.191 \
- 244.44 132.091 244.44 133.103 243.878 134.002 \
- 242.978 134.902 242.079 135.351 241.067 135.913 \
- 240.167 136.363 239.268 136.813 238.818 137.263 \
- 237.806 137.712 236.907 138.162 235.445 138.724 \
- 234.546 139.174 233.646 139.624 232.634 140.523 \
- 230.835 140.973 228.924 141.535 227.013 142.435 \
- 225.664 142.884 223.302 143.334 221.391 143.334 \
- 220.941 143.334 219.142 144.346 217.681 144.796 \
- 216.781 145.695 216.332 146.595 216.332 147.607 \
- 215.769 -fill $pengcolor -outline {} -width 1 -tags logo
-
- $c create polygon 165.371 241.067 165.371 \
- 241.067 164.921 243.878 164.921 246.239 163.46 \
- 246.689 161.211 247.251 160.649 247.251 160.199 \
- 244.44 160.199 243.878 160.199 243.428 160.199 \
- 242.079 160.199 240.167 160.199 239.718 159.749 \
- 239.268 160.199 237.806 159.749 237.357 159.749 \
- 236.007 159.749 230.835 159.749 229.824 159.749 \
- 228.924 159.749 226.113 159.749 225.664 159.749 \
- 223.752 159.749 222.853 159.749 218.58 159.749 \
- 218.13 159.749 217.681 160.199 217.231 161.661 \
- 216.781 162.11 216.781 162.56 216.781 163.46 216.781 \
- 164.022 219.142 163.46 222.403 163.46 222.853 163.46 \
- 224.202 163.46 225.664 163.46 226.563 163.46 227.013 \
- 163.46 228.924 163.01 230.835 163.01 232.634 163.46 \
- 233.197 164.022 232.634 164.472 232.634 164.921 \
- 232.185 164.921 231.735 165.371 231.735 165.821 \
- 232.185 165.371 233.646 165.821 236.007 165.371 \
- 238.256 165.371 238.818 165.371 240.617 165.371 \
- 241.067 -fill $pengcolor -outline {} -width 1 -tags logo
-
- $c create polygon 165.821 214.42 166.833 215.32 \
- 166.271 215.32 165.821 216.332 165.371 216.332 \
- 165.371 216.781 165.821 217.681 165.821 218.13 \
- 165.371 219.142 165.371 220.042 164.921 222.853 \
- 165.371 224.764 164.921 225.664 165.371 227.575 \
- 165.371 228.474 164.921 228.474 164.472 227.575 \
- 164.472 226.113 164.022 224.764 164.472 224.202 \
- 164.472 223.752 164.472 222.403 164.921 214.87 \
- 164.472 213.521 164.472 212.959 164.472 212.509 \
- 164.022 212.509 163.46 212.509 163.01 212.959 162.56 \
- 212.959 161.661 212.959 161.211 212.059 161.211 \
- 211.609 160.649 211.609 160.199 209.698 160.649 \
- 208.349 163.46 206.437 164.472 206.437 165.821 \
- 207.899 165.821 208.349 166.833 210.148 166.833 \
- 210.71 165.821 211.609 165.371 212.059 165.371 \
- 212.959 165.821 213.97 165.821 214.42 -fill $pengcolor \
- -outline {} -width 1 -tags logo
-
- $c create polygon 201.462 248.6 201.462 249.05 \
- 201.012 249.05 200.563 249.05 200.001 248.6 199.551 \
- 248.6 198.651 247.7 197.752 247.251 196.74 246.689 \
- 196.29 245.789 194.379 244.89 194.379 244.44 194.379 \
- 242.529 193.929 242.079 193.479 240.617 193.479 \
- 240.167 193.929 239.718 193.479 239.268 193.03 \
- 236.457 192.58 234.096 192.58 233.197 192.58 231.735 \
- 192.58 223.302 192.58 221.391 192.13 220.941 191.568 \
- 221.953 189.769 226.113 189.319 226.563 189.319 \
- 227.013 188.757 228.025 188.307 228.474 188.757 \
- 228.474 185.497 234.096 185.047 234.995 184.597 \
- 236.457 184.147 236.457 184.147 236.907 184.147 \
- 237.357 183.136 239.268 182.686 239.268 182.686 \
- 239.718 182.236 240.167 181.786 241.067 181.337 \
- 242.529 180.887 242.529 180.887 243.878 179.425 \
- 245.789 178.975 246.689 178.076 246.689 178.076 \
- 247.251 177.064 247.7 175.715 247.7 175.265 247.7 \
- 174.703 247.7 174.253 247.251 174.253 246.689 \
- 174.253 245.789 173.804 242.079 174.253 242.079 \
- 173.804 241.629 173.804 241.067 173.804 238.818 \
- 173.804 237.806 173.804 236.457 173.354 234.546 \
- 173.354 233.197 173.804 232.634 173.804 232.185 \
- 173.804 231.735 173.804 228.924 173.354 227.575 \
- 173.804 227.575 173.804 225.664 173.804 225.214 \
- 173.804 224.764 173.804 223.302 173.804 217.231 \
- 174.253 216.332 174.703 215.769 178.526 214.87 \
- 179.425 215.32 179.425 216.332 179.425 217.681 \
- 179.425 218.58 178.975 219.142 178.526 220.492 \
- 178.526 220.941 178.076 221.391 178.076 221.953 \
- 178.076 225.664 177.514 226.563 177.514 228.025 \
- 177.064 228.474 177.064 228.924 177.064 230.835 \
- 177.514 236.457 177.064 237.806 177.514 237.806 \
- 177.514 238.818 177.514 240.617 177.514 241.067 \
- 178.076 241.629 178.526 241.629 179.425 241.067 \
- 179.875 240.617 179.875 240.167 180.325 239.268 \
- 181.337 238.256 182.236 236.457 183.698 234.546 \
- 184.147 233.197 185.497 230.835 186.509 229.824 \
- 187.408 227.575 187.408 227.013 187.408 226.563 \
- 187.858 225.664 188.307 225.214 188.757 224.764 \
- 188.757 224.202 189.319 222.403 190.219 220.941 \
- 191.118 217.681 192.13 215.769 194.379 214.87 \
- 194.941 214.87 196.74 214.42 196.74 215.769 196.29 \
- 215.769 196.29 216.332 196.29 216.781 196.74 219.592 \
- 196.74 220.492 196.29 221.391 196.74 224.764 196.29 \
- 225.664 196.29 226.113 196.29 227.575 196.74 229.374 \
- 197.19 235.445 198.202 239.268 198.202 239.718 \
- 198.202 241.067 198.202 242.529 198.651 242.978 \
- 199.101 243.878 199.101 244.44 199.551 244.89 \
- 200.001 246.239 201.462 248.6 -fill $pengcolor -outline \
- {} -width 1 -tags logo
-
- $c create polygon 71.714 185.412 71.714 110.869 \
- 81.496 110.869 82.845 110.981 83.969 111.431 85.094 \
- 112.106 86.105 113.118 86.893 114.467 87.567 116.041 \
- 88.017 117.39 88.242 118.065 88.467 118.852 88.579 \
- 119.639 88.804 120.538 88.916 121.438 89.029 122.337 \
- 89.141 123.349 89.254 124.361 89.366 125.485 89.366 \
- 126.61 89.478 127.734 89.478 128.971 89.478 130.208 \
- 89.478 131.444 89.478 132.456 89.478 133.468 89.478 \
- 134.48 89.366 135.492 89.254 136.391 89.254 137.291 \
- 89.141 138.19 89.029 139.09 88.916 139.877 88.804 \
- 140.664 88.691 141.451 88.579 142.238 88.354 143.362 \
- 88.129 144.374 87.904 145.386 87.567 146.398 87.342 \
- 147.297 87.005 148.197 86.668 148.984 86.218 149.771 \
- 87.005 151.233 87.342 152.02 87.68 152.919 87.904 \
- 153.931 88.129 154.943 88.129 155.505 88.354 156.854 \
- 88.354 157.641 88.354 158.428 88.467 159.328 88.467 \
- 160.34 88.467 161.352 88.467 162.476 88.579 163.6 \
- 88.579 164.837 88.579 166.186 88.579 166.973 88.691 \
- 167.873 88.804 168.885 88.916 169.897 89.029 171.021 \
- 89.029 172.258 89.029 173.719 89.029 175.068 89.029 \
- 176.305 89.029 177.542 89.141 178.554 89.141 179.566 \
- 89.141 180.353 89.141 181.14 89.254 181.814 89.366 \
- 182.714 89.478 183.051 89.478 185.412 83.857 185.412 \
- 83.857 184.738 83.744 183.951 83.744 183.276 83.744 \
- 182.489 83.744 180.803 83.857 179.791 83.857 178.891 \
- 83.857 177.879 83.857 176.867 83.857 175.743 83.857 \
- 174.619 83.857 173.27 83.857 172.033 83.744 170.908 \
- 83.744 170.009 83.632 169.109 83.632 168.322 83.52 \
- 166.973 83.407 166.524 83.407 166.186 83.407 165.062 \
- 83.407 164.05 83.295 163.151 83.295 162.251 83.295 \
- 161.464 83.182 160.789 82.957 159.553 81.945 158.203 \
- 80.596 157.754 76.886 157.754 76.886 185.412 71.714 \
- 185.412 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 92.289 148.309 92.289 147.185 \
- 92.289 146.061 92.289 145.049 92.402 143.924 92.402 \
- 142.8 92.402 141.788 92.402 140.664 92.514 139.652 \
- 92.514 138.64 92.627 137.628 92.627 136.616 92.739 \
- 135.717 92.739 134.705 92.851 133.805 92.964 132.793 \
- 92.964 131.894 93.076 130.995 93.301 129.196 93.414 \
- 128.409 93.526 127.509 93.639 126.722 93.751 125.935 \
- 93.863 125.148 93.976 124.361 94.313 122.787 94.426 \
- 122.112 94.65 121.325 94.763 120.651 95.1 119.301 \
- 95.55 117.615 96.112 116.041 96.674 114.692 97.236 \
- 113.455 97.799 112.443 98.361 111.544 99.035 110.757 \
- 99.71 110.082 100.385 109.632 101.059 109.295 \
- 101.846 109.07 102.633 108.958 104.207 109.295 \
- 104.882 109.632 105.556 110.082 106.231 110.757 \
- 106.906 111.544 107.468 112.443 108.03 113.455 \
- 108.592 114.692 109.154 116.041 109.604 117.615 \
- 110.054 119.301 110.279 119.976 110.616 121.325 \
- 110.841 122.112 110.953 122.787 111.178 123.574 \
- 111.403 125.148 111.628 125.935 111.74 126.722 \
- 111.853 127.622 111.965 128.409 112.078 129.308 \
- 112.19 130.208 112.302 130.995 112.415 132.006 \
- 112.64 133.805 112.752 134.817 112.865 135.717 \
- 112.977 136.729 112.977 137.741 113.089 138.752 \
- 113.089 139.764 113.202 140.776 113.202 141.788 \
- 113.314 142.912 113.314 143.924 113.314 145.049 \
- 113.427 146.061 113.427 147.185 113.427 148.309 \
- 113.427 149.546 113.314 150.783 113.314 151.907 \
- 113.314 153.032 113.314 154.156 113.202 155.28 \
- 113.202 156.405 113.089 157.529 113.089 158.541 \
- 112.977 159.553 112.865 160.565 112.752 161.576 \
- 112.64 162.588 112.527 163.6 112.415 164.5 112.302 \
- 165.512 112.19 166.411 112.078 167.311 111.965 \
- 168.21 111.853 169.109 111.628 169.897 111.515 \
- 170.796 111.403 171.583 111.178 172.37 111.066 \
- 173.157 110.616 174.731 110.504 175.518 110.279 \
- 176.193 110.054 176.98 109.604 178.666 109.154 \
- 180.128 108.592 181.59 108.03 182.826 107.468 \
- 183.951 106.906 184.963 106.231 185.75 105.556 \
- 186.424 104.882 186.986 104.207 187.436 103.42 \
- 187.661 102.633 187.661 101.846 187.661 101.059 \
- 187.436 100.385 186.986 99.71 186.424 99.035 185.75 \
- 98.361 184.963 97.799 183.951 97.236 182.826 96.674 \
- 181.59 96.112 180.128 95.55 178.666 95.1 176.98 \
- 94.988 176.193 94.763 175.518 94.538 174.731 94.426 \
- 173.944 94.088 172.37 93.976 171.583 93.863 170.796 \
- 93.639 169.897 93.526 169.109 93.414 168.21 93.301 \
- 167.311 93.189 166.411 93.076 165.512 92.964 164.5 \
- 92.964 163.6 92.851 162.588 92.739 161.576 92.627 \
- 160.565 92.627 159.553 92.514 158.541 92.514 157.529 \
- 92.514 156.405 92.402 155.28 92.402 154.156 92.402 \
- 153.032 92.289 151.907 92.289 150.783 92.289 149.546 \
- 92.289 148.309 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 121.859 110.869 127.481 \
- 110.869 134.902 185.412 129.28 185.412 127.931 \
- 171.808 120.847 171.808 119.948 185.412 114.326 \
- 185.412 121.859 110.869 -fill #000000 -outline {} \
- -width 1 -tags logo
-
- $c create polygon 137.263 185.412 137.263 \
- 110.869 147.157 110.869 148.394 110.981 149.518 \
- 111.431 150.417 112.106 151.317 113.118 152.104 \
- 114.467 152.778 116.041 153.228 117.39 153.341 \
- 118.065 153.566 118.852 153.903 120.538 154.015 \
- 121.438 154.128 122.337 154.24 123.349 154.353 \
- 124.361 154.465 125.485 154.465 126.61 154.577 \
- 127.734 154.577 128.971 154.577 130.208 154.577 \
- 131.444 154.577 132.456 154.577 133.468 154.577 \
- 134.48 154.577 135.492 154.577 136.391 154.577 \
- 137.291 154.577 138.19 154.465 139.09 154.465 \
- 139.877 154.353 140.664 154.24 141.451 154.128 \
- 142.238 153.903 143.362 153.678 144.374 153.341 \
- 145.386 153.003 146.398 152.554 147.297 152.216 \
- 148.197 151.767 148.984 151.317 149.771 152.104 \
- 151.233 152.441 152.02 152.778 152.919 153.003 \
- 153.931 153.228 154.943 153.341 155.505 153.453 \
- 156.854 153.566 157.641 153.678 158.428 153.79 \
- 159.328 153.903 160.34 154.015 161.352 154.015 \
- 162.476 154.128 163.6 154.128 164.837 154.128 \
- 166.186 154.128 166.973 154.128 167.873 154.128 \
- 168.885 154.128 169.897 154.128 171.021 154.128 \
- 172.258 154.128 173.719 154.24 175.068 154.24 \
- 176.305 154.353 177.542 154.353 178.554 154.465 \
- 179.566 154.577 180.353 154.69 181.14 154.69 181.814 \
- 154.915 182.714 155.027 183.051 155.027 185.412 \
- 149.405 185.412 149.405 184.738 149.293 183.951 \
- 149.293 183.276 149.181 182.489 149.181 180.803 \
- 149.068 179.791 149.068 178.891 149.068 177.879 \
- 149.068 176.867 148.956 175.743 148.956 174.619 \
- 148.956 173.27 148.956 172.033 148.956 170.908 \
- 148.956 170.009 148.956 169.109 148.956 168.322 \
- 148.956 166.973 148.956 166.524 148.956 166.186 \
- 148.956 165.062 148.843 164.05 148.731 163.151 \
- 148.618 162.251 148.506 161.464 148.394 160.789 \
- 148.056 159.553 147.269 158.203 146.145 157.754 \
- 142.435 157.754 142.435 185.412 137.263 185.412 \
- -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 158.4 185.412 158.4 110.869 \
- 164.022 110.869 164.022 185.412 158.4 185.412 -fill \
- #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 168.182 185.412 168.182 \
- 110.869 173.804 110.869 177.514 135.267 177.739 \
- 136.054 177.851 136.954 177.964 137.853 178.076 \
- 138.752 178.301 139.539 178.413 140.439 178.526 \
- 141.338 178.751 143.137 178.975 144.037 179.088 \
- 144.824 179.2 145.723 179.313 146.623 179.425 147.41 \
- 179.538 148.422 179.763 149.321 179.875 150.333 \
- 180.1 151.233 180.212 152.132 180.437 153.032 180.55 \
- 154.043 180.774 154.943 180.887 155.842 180.999 \
- 156.742 181.224 157.754 181.337 158.653 181.337 \
- 157.641 181.224 156.629 181.224 155.617 181.224 \
- 154.606 181.224 153.594 181.112 152.582 181.112 \
- 151.682 181.112 150.67 180.999 149.771 180.999 \
- 148.759 180.999 147.86 180.887 146.96 180.887 \
- 145.948 180.887 145.049 180.887 144.149 180.887 \
- 143.25 180.887 142.125 180.887 141.114 180.887 \
- 140.102 180.887 139.09 180.887 138.078 180.887 \
- 137.178 180.887 136.166 180.887 135.267 180.887 \
- 134.368 180.887 133.468 180.887 132.569 180.887 \
- 131.669 180.887 130.882 180.887 130.095 180.887 \
- 110.869 185.946 110.869 185.946 185.412 180.325 \
- 185.412 176.165 160.565 176.052 159.778 175.94 \
- 158.99 175.827 158.203 175.602 156.517 175.49 \
- 155.617 175.378 154.718 175.265 153.931 175.153 \
- 153.032 175.04 152.02 174.928 151.12 174.703 150.221 \
- 174.591 149.321 174.478 148.422 174.366 147.41 \
- 174.141 146.51 174.028 145.611 173.804 144.599 \
- 173.691 143.587 173.579 142.575 173.354 141.676 \
- 173.241 140.551 173.017 139.539 172.904 138.528 \
- 172.904 139.539 172.904 140.551 173.017 141.563 \
- 173.017 142.575 173.017 143.587 173.129 144.599 \
- 173.129 145.498 173.129 146.51 173.241 147.41 \
- 173.241 148.422 173.241 149.321 173.354 150.221 \
- 173.354 151.233 173.354 152.132 173.354 153.144 \
- 173.354 154.156 173.354 155.055 173.354 156.067 \
- 173.354 156.967 173.354 157.866 173.354 158.766 \
- 173.354 159.553 173.354 160.452 173.354 161.239 \
- 173.354 162.026 173.354 162.926 173.354 185.412 \
- 168.182 185.412 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 206.184 185.412 205.622 \
- 175.968 205.397 177.092 205.172 178.217 204.948 \
- 179.228 204.61 180.128 204.385 181.027 204.048 \
- 181.814 203.823 182.489 203.486 183.164 203.149 \
- 183.838 202.811 184.4 202.024 185.75 201.125 186.762 \
- 200.113 187.436 199.101 187.661 198.089 187.549 \
- 197.19 186.986 196.29 186.087 195.391 184.85 194.941 \
- 184.176 194.491 183.389 194.042 182.489 193.592 \
- 181.477 193.255 180.465 192.805 179.341 192.467 \
- 178.217 192.13 176.98 191.905 176.193 191.68 175.406 \
- 191.568 174.619 191.456 173.832 191.231 172.932 \
- 191.118 172.145 191.006 171.246 190.781 169.559 \
- 190.669 168.66 190.556 167.648 190.444 166.748 \
- 190.331 165.736 190.219 164.725 190.106 163.825 \
- 189.994 162.926 189.994 162.026 189.882 161.127 \
- 189.769 160.227 189.769 159.215 189.657 158.316 \
- 189.544 157.304 189.544 156.405 189.432 155.393 \
- 189.432 154.381 189.319 153.369 189.319 152.357 \
- 189.319 151.345 189.319 150.333 189.319 149.321 \
- 189.319 148.197 189.319 146.96 189.319 145.948 \
- 189.319 144.824 189.319 143.7 189.319 142.688 \
- 189.432 141.563 189.432 140.551 189.544 139.539 \
- 189.544 138.528 189.544 137.516 189.657 136.504 \
- 189.769 135.492 189.769 134.592 189.882 133.581 \
- 189.994 132.681 189.994 131.782 190.106 130.882 \
- 190.219 129.983 190.331 129.083 190.556 127.397 \
- 190.669 126.61 190.781 125.823 191.006 124.923 \
- 191.118 124.136 191.231 123.462 191.568 121.887 \
- 191.793 121.213 191.905 120.426 192.13 119.751 \
- 192.58 117.952 193.142 116.378 193.704 114.917 \
- 194.266 113.567 194.941 112.443 195.616 111.431 \
- 196.29 110.532 196.965 109.857 197.752 109.295 \
- 198.426 108.845 199.214 108.62 200.001 108.508 \
- 201.799 108.958 202.699 109.407 203.374 110.194 \
- 204.161 111.094 204.835 112.218 205.51 113.567 \
- 206.184 115.141 206.634 116.491 206.859 117.165 \
- 206.971 117.952 207.421 119.526 207.534 120.426 \
- 207.758 121.325 207.871 122.225 207.983 123.124 \
- 208.096 124.136 208.208 125.036 208.321 126.047 \
- 208.433 127.172 208.545 128.184 208.658 129.308 \
- 208.77 130.32 208.77 131.557 208.883 132.681 208.995 \
- 133.805 204.273 133.805 204.161 132.681 203.936 \
- 131.557 203.711 130.432 203.486 129.533 203.261 \
- 128.633 202.924 127.734 202.699 126.947 202.362 \
- 126.385 201.35 124.586 200.001 124.024 199.438 \
- 124.136 198.989 124.361 198.426 124.923 197.977 \
- 125.598 197.527 126.497 197.077 127.622 196.628 \
- 128.971 196.29 130.545 196.178 131.219 195.953 \
- 132.681 195.84 133.356 195.728 134.143 195.616 \
- 134.93 195.503 135.829 195.278 137.516 195.278 \
- 138.303 195.166 139.315 195.166 140.214 195.053 \
- 141.114 195.053 142.125 194.941 143.137 194.941 \
- 144.149 194.941 145.161 194.941 146.173 194.941 \
- 147.297 194.941 148.309 194.941 149.546 194.941 \
- 150.67 194.941 151.907 194.941 152.919 195.053 \
- 154.043 195.053 155.168 195.166 156.18 195.166 \
- 157.192 195.278 158.091 195.391 159.103 195.391 \
- 160.002 195.503 160.902 195.616 161.801 195.728 \
- 162.588 195.84 163.375 196.065 164.162 196.178 \
- 164.949 196.29 165.736 196.628 167.198 197.077 \
- 168.547 197.527 169.672 197.977 170.571 198.426 \
- 171.246 198.989 171.808 199.438 172.145 200.001 \
- 172.258 200.9 171.92 201.575 171.246 202.249 170.009 \
- 202.811 168.547 203.149 167.76 203.374 166.973 \
- 203.598 166.186 203.823 165.399 204.048 164.5 \
- 204.273 163.488 204.385 162.476 204.498 161.464 \
- 204.61 160.34 204.723 159.103 200.001 159.103 \
- 200.001 145.049 209.445 145.049 209.445 185.412 \
- 206.184 185.412 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 148.506 261.305 148.506 \
- 263.554 143.784 263.554 143.784 261.305 143.671 \
- 260.068 143.334 259.394 142.772 259.056 141.985 \
- 258.944 141.085 259.056 140.523 259.394 140.074 \
- 261.755 140.074 263.104 140.523 264.678 141.085 \
- 265.465 141.985 266.364 146.145 270.637 147.607 \
- 271.874 148.506 272.998 148.843 274.01 148.956 \
- 275.359 148.956 277.158 148.843 278.507 148.506 \
- 279.632 147.944 280.643 147.157 281.43 146.482 \
- 281.88 145.695 282.218 144.796 282.442 143.784 \
- 282.667 142.659 282.78 141.535 282.78 140.298 282.78 \
- 139.286 282.78 138.387 282.667 137.6 282.442 136.925 \
- 282.218 136.363 281.88 135.576 281.093 135.014 \
- 280.194 134.564 278.957 134.452 277.608 134.452 \
- 275.359 139.624 275.359 139.624 277.608 139.736 \
- 279.069 140.074 279.969 141.535 280.419 142.659 \
- 280.081 143.334 279.519 143.671 278.62 143.784 \
- 277.158 143.784 275.809 143.671 275.022 143.334 \
- 274.235 142.772 273.448 141.985 272.548 137.263 \
- 267.376 136.251 266.364 135.351 265.465 135.014 \
- 264.565 134.902 263.554 134.902 261.755 135.014 \
- 260.518 135.464 259.506 136.026 258.719 136.813 \
- 257.932 137.488 257.595 138.275 257.145 139.174 \
- 256.92 140.186 256.695 141.31 256.583 142.435 \
- 256.583 143.447 256.583 144.458 256.583 145.245 \
- 256.695 145.92 256.92 147.157 257.482 147.719 \
- 258.157 148.169 258.944 148.394 260.068 148.506 \
- 261.305 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 165.821 270.187 165.821 \
- 276.708 165.821 277.833 165.708 278.957 165.483 \
- 279.856 165.259 280.643 164.921 281.318 164.472 \
- 281.88 163.909 282.218 163.235 282.555 162.448 \
- 282.667 161.548 282.78 160.536 282.78 159.3 282.78 \
- 158.175 282.78 157.051 282.78 156.151 282.667 \
- 155.364 282.555 154.69 282.218 154.128 281.88 \
- 153.678 281.318 153.341 280.643 153.116 279.856 \
- 152.891 278.845 152.778 277.833 152.778 276.708 \
- 152.778 270.187 152.778 269.063 152.891 268.051 \
- 153.116 267.264 153.341 266.589 154.128 265.465 \
- 155.364 264.678 156.151 264.453 157.051 264.228 \
- 158.063 264.116 159.3 264.116 160.424 264.116 \
- 161.548 264.228 162.448 264.453 163.235 264.678 \
- 163.909 265.015 164.472 265.465 164.921 265.915 \
- 165.483 267.264 165.708 268.051 165.821 269.063 \
- 165.821 270.187 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 177.514 256.583 177.514 \
- 258.494 177.064 258.494 176.165 258.606 175.715 \
- 258.944 175.378 259.281 175.265 259.843 175.265 \
- 264.565 177.514 264.565 177.514 266.927 175.265 \
- 266.927 175.265 282.78 170.543 282.78 170.543 \
- 266.927 168.632 266.927 168.632 264.565 170.543 \
- 264.565 170.543 261.305 170.655 259.843 170.993 \
- 258.606 171.442 257.707 171.892 257.032 173.579 \
- 256.358 174.703 256.133 176.165 256.133 176.727 \
- 256.133 177.064 256.133 177.514 256.583 -fill \
- #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 185.946 259.843 185.946 \
- 264.565 188.757 264.565 188.757 266.927 185.946 \
- 266.927 185.946 278.62 186.171 279.407 186.509 \
- 279.969 187.071 280.306 187.858 280.419 188.307 \
- 280.419 188.757 280.419 188.757 282.78 188.645 \
- 282.78 188.307 282.78 187.183 282.78 186.509 282.78 \
- 185.159 282.78 183.923 282.555 182.911 282.33 \
- 182.236 281.88 181.786 281.206 181.561 280.419 \
- 181.337 279.407 181.337 278.17 181.337 266.927 \
- 179.425 266.927 179.425 264.565 181.337 264.565 \
- 181.337 261.305 185.946 259.843 -fill #000000 \
- -outline {} -width 1 -tags logo
-
- $c create polygon 190.219 264.565 194.379 \
- 264.565 196.29 279.519 196.74 279.519 199.101 \
- 264.565 204.723 264.565 207.084 279.519 207.534 \
- 279.519 209.895 264.565 213.605 264.565 209.895 \
- 282.78 204.723 282.78 201.912 267.376 201.462 \
- 267.376 199.101 282.78 193.479 282.78 190.219 \
- 264.565 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 229.121 269.175 229.121 282.78 \
- 224.848 282.78 224.848 280.981 224.061 281.768 \
- 223.049 282.33 221.925 282.667 220.688 282.78 \
- 219.564 282.78 218.44 282.555 217.54 282.33 216.866 \
- 281.88 216.528 281.318 216.191 280.531 216.079 \
- 279.632 215.966 278.62 215.966 275.359 216.079 \
- 274.347 216.978 272.998 217.877 272.548 218.44 \
- 272.211 219.114 271.986 219.789 271.761 220.688 \
- 271.536 221.588 271.424 222.6 271.311 223.724 \
- 271.199 224.848 271.087 224.848 269.175 224.736 \
- 267.826 224.399 266.927 223.612 266.477 222.487 \
- 266.364 221.7 266.477 221.138 266.927 220.688 \
- 268.726 220.688 269.175 216.416 269.175 216.528 \
- 267.938 216.753 266.702 217.203 265.69 217.877 \
- 265.015 218.44 264.678 219.114 264.453 219.901 \
- 264.228 220.801 264.116 221.925 264.116 223.049 \
- 264.116 224.061 264.116 225.073 264.116 225.86 \
- 264.228 226.535 264.453 227.659 265.015 228.334 \
- 265.69 228.783 266.702 229.008 267.938 229.121 \
- 269.175 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 243.175 264.565 243.175 \
- 266.927 242.725 266.927 241.601 266.927 240.701 \
- 267.151 239.914 267.489 239.352 267.826 239.015 \
- 268.276 238.678 268.95 238.565 269.737 238.453 \
- 270.637 238.453 282.78 233.731 282.78 233.731 \
- 264.565 238.453 264.565 238.453 265.915 239.352 \
- 265.128 240.364 264.565 242.163 264.116 242.725 \
- 264.565 243.175 264.565 -fill #000000 -outline {} \
- -width 1 -tags logo
-
- $c create polygon 258.129 270.187 258.129 \
- 274.347 249.696 274.347 249.696 278.17 249.809 \
- 279.294 250.146 279.969 250.708 280.643 251.607 \
- 280.981 252.732 280.643 253.406 279.969 253.744 \
- 279.294 253.969 278.17 253.969 276.708 258.129 \
- 276.708 258.129 277.608 258.129 278.957 257.904 \
- 280.081 257.454 281.093 256.779 281.88 256.217 \
- 282.218 254.643 282.667 253.744 282.78 252.732 \
- 282.78 251.607 282.78 250.371 282.78 249.359 282.78 \
- 248.459 282.667 247.672 282.442 246.436 281.88 \
- 245.986 281.318 245.649 280.643 245.424 279.856 \
- 245.199 278.957 245.086 277.833 244.974 276.708 \
- 244.974 270.187 245.086 269.063 245.199 268.051 \
- 245.311 267.264 245.649 266.589 245.986 265.915 \
- 246.436 265.465 246.998 265.015 247.672 264.678 \
- 248.459 264.453 249.359 264.228 250.371 264.116 \
- 251.607 264.116 252.732 264.116 253.744 264.228 \
- 254.756 264.453 255.543 264.678 256.217 265.015 \
- 256.779 265.465 257.229 265.915 257.566 266.589 \
- 257.791 267.264 258.016 268.051 258.129 269.063 \
- 258.129 270.187 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 272.183 256.583 277.355 \
- 256.583 277.355 282.78 272.183 282.78 272.183 \
- 256.583 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 295.569 268.726 295.569 282.78 \
- 290.959 282.78 290.959 269.175 290.847 268.051 \
- 290.509 267.376 289.947 266.702 289.048 266.364 \
- 287.923 266.702 287.136 267.376 287.024 268.051 \
- 287.136 269.175 287.136 282.78 282.527 282.78 \
- 282.527 264.565 286.687 264.565 287.136 265.915 \
- 288.036 265.128 289.048 264.565 290.172 264.228 \
- 291.409 264.116 292.533 264.116 293.433 264.341 \
- 294.107 264.565 294.669 265.015 295.344 266.477 \
- 295.569 267.489 295.569 268.726 -fill #000000 \
- -outline {} -width 1 -tags logo
-
- $c create polygon 312.434 269.737 312.434 \
- 270.637 308.274 270.637 308.274 269.175 308.161 \
- 267.826 307.824 266.927 307.262 266.477 306.363 \
- 266.364 305.576 266.477 305.013 266.927 304.676 \
- 267.826 304.564 269.175 304.564 278.17 304.676 \
- 279.294 305.013 279.969 306.363 280.981 307.262 \
- 280.643 307.824 279.969 307.937 279.294 307.824 \
- 278.17 307.824 276.259 312.434 276.259 312.434 \
- 277.608 312.434 278.957 312.209 280.081 311.759 \
- 281.093 311.085 281.88 310.523 282.218 309.173 \
- 282.667 308.386 282.78 307.374 282.78 306.363 282.78 \
- 305.238 282.78 304.226 282.78 303.327 282.667 \
- 302.427 282.442 301.753 282.218 301.191 281.88 \
- 300.853 281.318 300.516 280.643 300.179 279.856 \
- 299.954 278.957 299.841 277.833 299.841 276.708 \
- 299.841 270.187 299.841 269.063 299.954 268.051 \
- 300.179 267.264 300.404 266.589 301.191 265.465 \
- 302.427 264.678 303.327 264.453 304.226 264.228 \
- 305.238 264.116 306.363 264.116 307.374 264.116 \
- 308.386 264.228 309.173 264.453 309.96 264.678 \
- 310.523 265.015 311.085 265.465 311.759 266.252 \
- 312.209 267.264 312.434 268.388 312.434 269.737 \
- -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 316.706 279.069 320.866 \
- 279.069 320.866 282.78 316.706 282.78 316.706 \
- 279.069 -fill #000000 -outline {} -width 1 -tags logo
-
- $c create polygon 48.215 186.312 48.215 185.412 \
- 47.766 184.4 47.766 183.501 47.316 183.501 47.316 \
- 182.601 46.416 181.59 46.416 181.14 45.967 180.24 \
- 45.405 179.791 44.955 179.228 44.055 178.329 43.606 \
- 177.879 43.156 177.43 42.144 176.98 41.694 176.418 \
- 41.245 175.968 38.883 175.068 36.972 174.169 36.522 \
- 174.169 35.173 173.607 34.723 174.169 31.913 173.607 \
- 31.913 174.169 29.551 173.607 29.551 174.169 28.54 \
- 174.169 28.09 174.619 27.19 174.169 27.19 174.619 \
- 26.741 174.619 25.729 175.068 23.93 175.518 22.918 \
- 175.068 22.468 175.518 20.669 176.418 19.657 176.418 \
- 15.048 178.779 14.036 179.228 12.686 180.24 12.237 \
- 180.69 11.225 181.59 10.775 182.039 10.325 182.601 \
- 10.775 182.601 10.325 184.4 10.775 184.85 11.225 \
- 186.312 14.036 188.223 14.485 188.673 16.846 190.022 \
- 17.296 190.472 17.296 191.034 15.947 191.933 15.048 \
- 192.383 14.485 192.833 14.036 193.283 13.136 193.845 \
- 12.237 194.295 12.686 195.644 12.686 196.094 12.237 \
- 197.555 12.237 198.005 11.675 198.904 12.237 200.816 \
- 12.237 202.277 12.237 204.526 11.675 205.988 12.237 \
- 205.988 12.237 206.437 12.237 207.337 12.686 208.349 \
- 12.686 209.248 13.136 209.698 12.686 211.16 13.136 \
- 212.509 13.136 213.521 13.586 215.32 13.586 216.781 \
- 13.586 217.681 14.036 220.492 14.485 222.403 15.048 \
- 222.853 15.947 222.853 15.947 222.403 16.397 221.953 \
- 16.846 216.781 17.296 215.32 17.858 211.609 18.308 \
- 210.71 18.308 210.148 18.308 209.248 17.858 208.798 \
- 17.858 207.899 18.308 206.437 18.308 205.538 18.308 \
- 205.088 18.308 203.627 16.846 203.627 15.947 203.177 \
- 15.947 202.727 15.947 202.277 16.397 201.715 16.846 \
- 201.715 17.858 201.715 18.308 201.715 18.758 201.265 \
- 18.308 200.816 17.858 199.916 18.308 198.455 17.858 \
- 198.455 17.858 193.283 19.208 192.383 20.107 191.933 \
- 21.569 191.484 22.018 191.484 22.918 192.383 22.918 \
- 192.833 23.48 192.833 23.93 198.005 23.48 199.467 \
- 23.93 202.277 25.279 202.277 29.551 202.727 30.001 \
- 202.277 30.901 202.277 31.913 202.277 35.623 201.265 \
- 36.522 201.265 36.972 200.816 37.984 200.816 38.883 \
- 200.816 39.333 200.366 40.345 199.916 40.795 199.916 \
- 42.594 198.455 44.055 198.005 44.055 197.555 44.505 \
- 197.105 46.416 195.644 46.416 194.744 46.866 194.295 \
- 47.316 193.845 47.766 193.283 47.316 192.833 48.215 \
- 190.472 48.215 190.022 48.215 189.572 48.215 188.673 \
- 48.215 187.211 48.215 186.762 48.215 186.312 -fill \
- $bg -outline {} -width 1 -tags logo
-
- $c create polygon 76.886 142.688 81.046 142.688 \
- 82.508 142.35 83.407 140.889 83.632 140.327 83.969 \
- 138.865 84.082 137.965 84.194 137.066 84.307 136.054 \
- 84.307 134.93 84.307 133.805 84.307 132.456 84.194 \
- 131.332 84.082 130.208 83.857 129.308 83.632 128.409 \
- 83.407 127.734 82.395 126.272 81.046 125.823 76.886 \
- 125.823 76.886 142.688 -fill $bg -outline {} -width \
- 1 -tags logo
-
- $c create polygon 97.461 148.309 97.461 149.546 \
- 97.461 150.783 97.461 152.02 97.574 153.144 97.574 \
- 154.268 97.686 155.28 97.686 156.405 97.799 157.416 \
- 97.799 158.316 97.911 159.328 98.023 160.227 98.136 \
- 161.127 98.361 162.701 98.473 163.488 98.586 164.275 \
- 98.698 164.949 98.81 165.736 99.373 167.535 99.822 \
- 169.109 100.497 170.234 101.059 171.133 101.846 \
- 171.583 102.633 171.808 104.095 171.133 104.769 \
- 170.234 105.332 169.109 105.894 167.535 106.343 \
- 165.736 106.456 164.949 106.681 164.275 106.793 \
- 163.488 106.906 162.701 107.018 161.914 107.243 \
- 160.227 107.355 159.328 107.355 158.316 107.468 \
- 157.416 107.58 156.405 107.58 155.28 107.693 154.268 \
- 107.693 153.144 107.693 152.02 107.693 150.783 \
- 107.805 149.546 107.805 148.309 107.805 147.073 \
- 107.693 145.836 107.693 144.711 107.693 143.587 \
- 107.693 142.463 107.58 141.338 107.58 140.327 \
- 107.468 139.315 107.355 138.303 107.355 137.403 \
- 107.243 136.504 107.131 135.604 106.906 133.918 \
- 106.793 133.131 106.681 132.456 106.456 131.669 \
- 106.343 130.995 105.894 129.196 105.332 127.622 \
- 104.769 126.497 104.095 125.598 103.42 125.148 \
- 102.633 124.923 101.846 125.148 101.059 125.598 \
- 100.497 126.497 99.822 127.622 99.373 129.196 98.81 \
- 130.995 98.698 131.669 98.586 132.456 98.473 133.131 \
- 98.361 133.918 98.248 134.817 98.023 136.504 97.911 \
- 137.403 97.799 138.303 97.799 139.315 97.686 140.327 \
- 97.686 141.338 97.574 142.463 97.574 143.587 97.461 \
- 144.711 97.461 145.836 97.461 147.073 97.461 148.309 \
- -fill $bg -outline {} -width 1 -tags logo
-
- $c create polygon 122.309 156.292 126.919 \
- 156.292 124.67 130.545 122.309 156.292 -fill $bg \
- -outline {} -width 1 -tags logo
-
- $c create polygon 142.435 142.688 146.145 \
- 142.688 147.607 142.35 148.506 140.889 148.731 \
- 140.327 149.068 138.865 149.181 137.965 149.293 \
- 137.066 149.405 136.054 149.405 134.93 149.405 \
- 133.805 149.405 132.456 149.405 131.332 149.405 \
- 130.208 149.293 129.308 149.181 128.409 148.956 \
- 127.734 148.056 126.272 146.595 125.823 142.435 \
- 125.823 142.435 142.688 -fill $bg -outline {} -width \
- 1 -tags logo
-
- $c create polygon 111.515 228.924 111.515 \
- 227.575 111.066 225.664 108.705 221.391 108.255 \
- 220.042 108.255 219.142 108.255 218.58 108.255 \
- 218.13 107.805 217.681 106.793 218.58 104.994 \
- 220.941 104.432 221.953 102.633 224.202 102.183 \
- 224.764 101.621 225.214 99.822 228.474 97.461 \
- 233.197 97.461 234.096 97.461 234.995 97.911 235.445 \
- 98.361 236.007 99.822 236.457 102.633 236.457 \
- 104.432 235.445 105.894 234.995 106.343 234.546 \
- 106.793 234.546 107.805 233.646 110.616 230.835 \
- 111.515 229.824 111.515 229.374 111.515 228.924 \
- -fill $bg -outline {} -width 1 -tags logo
-
- $c create polygon 161.211 269.175 160.986 \
- 267.826 160.649 266.927 160.199 266.477 159.3 \
- 266.364 158.4 266.477 157.838 266.927 157.613 \
- 267.826 157.388 269.175 157.388 278.17 157.613 \
- 279.294 157.838 279.969 159.3 280.981 160.199 \
- 280.643 160.649 279.969 160.986 279.294 161.211 \
- 278.17 161.211 269.175 -fill $bg -outline {} -width \
- 1 -tags logo
-
- $c create polygon 224.848 273.448 223.836 \
- 273.448 222.825 273.56 222.15 273.673 221.588 \
- 273.897 220.913 274.684 220.688 275.809 220.688 \
- 278.17 220.801 279.294 221.138 279.969 221.7 280.643 \
- 222.487 280.981 223.612 280.643 224.399 279.969 \
- 224.736 279.294 224.848 278.17 224.848 273.448 -fill \
- $bg -outline {} -width 1 -tags logo
-
- $c create polygon 253.969 269.175 253.744 \
- 267.826 253.406 266.927 252.732 266.477 251.607 \
- 266.364 250.708 266.477 250.146 266.927 249.696 \
- 269.175 249.696 272.548 253.969 272.548 253.969 \
- 269.175 -fill $bg -outline {} -width 1 -tags logo
-
-}
-
-#***********************************************************************
-# %PROCEDURE: LoadConnectionInfo
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Loads the connection information into the global ConnectionInfo variable
-#***********************************************************************
-proc LoadConnectionInfo {} {
- global ConnectionInfoFile ConnectionInfo PasswordFile
- set ConnectionInfo {}
- if {![file exists $ConnectionInfoFile]} {
- return
- }
- set problem [catch {
- set fp [open $ConnectionInfoFile "r"]
- while {1} {
- if {[gets $fp line] < 0} {
- break
- }
- set line [string trim $line]
- if {[string match "#*" $line]} {
- continue
- }
- if {"$line" == ""} {
- continue
- }
- set ConnectionInfo $line
- break
- }
- close $fp
- } err]
- if {$problem} {
- tk_dialog .err Error "Error loading configuration file: $err" error 0 OK
- }
- # Try loading and merging passwords if the password file is readable
- if {![file readable $PasswordFile]} {
- return
- }
-
- set fp [open $PasswordFile "r"]
- while {1} {
- if {[gets $fp line] < 0} {
- break
- }
- set line [string trim $line]
- if {[string match "#*" $line]} {
- continue
- }
- if {"$line" == ""} {
- continue
- }
- set passwords $line
- break
- }
- close $fp
-
- # Merge passwords
- foreach thing $passwords {
- set name [value $thing ConnectionName]
- set password [value $thing Password]
- set conn [GetConnection $name]
- if {"$conn" != ""} {
- lappend conn Password $password
- ReplaceConnection $conn
- }
- }
-}
-
-#***********************************************************************
-# %PROCEDURE: GetConnection
-# %ARGUMENTS:
-# name -- name of connection
-# %RETURNS:
-# key/value pair listing connection configuration, or "" if not found.
-#***********************************************************************
-proc GetConnection { name } {
- global ConnectionInfo
- foreach thing $ConnectionInfo {
- if {[value $thing ConnectionName] == "$name"} {
- return $thing
- }
- }
- return ""
-}
-
-
-#***********************************************************************
-# %PROCEDURE: DeleteConnection
-# %ARGUMENTS:
-# name -- name of connection
-# %RETURNS:
-# Nothing, but deletes connection named "$name"
-#***********************************************************************
-proc DeleteConnection { name } {
- global ConnectionInfo ConfigDir
- set newInfo {}
- set found 0
- foreach thing $ConnectionInfo {
- if {[value $thing ConnectionName] == "$name"} {
- set found 1
- } else {
- lappend newInfo $thing
- }
- }
- if {!$found} {
- return
- }
- set ConnectionInfo $newInfo
- SaveConnectionInfo
-
- # Delete the config file
- set fname [file join $ConfigDir conf.$name]
- catch { file delete $fname }
-
- BuildConnectionMenu
- if {[GetCurrentConnection] == $name} {
- if {[llength $ConnectionInfo] == 0} {
- SwitchConnection ""
- } else {
- set name [value [lindex $ConnectionInfo 0] ConnectionName]
- SwitchConnection $name
- }
- }
-}
-
-#***********************************************************************
-# %PROCEDURE: ReplaceConnection
-# %ARGUMENTS:
-# conn -- new name/value pairs
-# %RETURNS:
-# Nothing, but replaces connection in ConnectionInfo. If no such
-# connection exists, appends new connection.
-#***********************************************************************
-proc ReplaceConnection { conn } {
- global ConnectionInfo
- set name [value $conn ConnectionName]
- set newInfo {}
- set found 0
- foreach thing $ConnectionInfo {
- if {[value $thing ConnectionName] == "$name"} {
- lappend newInfo $conn
- set found 1
- } else {
- lappend newInfo $thing
- }
- }
- if {!$found} {
- lappend newInfo $conn
- }
- set ConnectionInfo $newInfo
-}
-
-proc DeletePPPoEConnection {} {
- set conn [GetCurrentConnection]
- if {"$conn" == ""} {
- return
- }
- set ans [tk_dialog .confirm "Confirm Deletion - RP-PPPoE" "Are you sure you wish to delete the connection `$conn'?" warning 0 No Yes]
- if {$ans} {
- DeleteConnection $conn
- }
-}
-
-#***********************************************************************
-# %PROCEDURE: CreateMainDialog
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Creates the main window
-#***********************************************************************
-proc CreateMainDialog {} {
- global ConnectionInfoFile
- global ConnectionInfo
- global Admin
- wm title . "RP-PPPoE"
- wm iconname . "PPPoE"
- frame .f1
- label .l1 -text "Connection: "
- menubutton .m1 -text "" -indicatoron 1 -menu .m1.menu -relief raised
- menu .m1.menu -tearoff 0
- pack .l1 .m1 -in .f1 -side left -expand 0 -fill x
- canvas .c -width 40 -height 20
- pack .c -in .f1 -side left -expand 0 -fill none
-
- # Draw the LED's
- .c create rectangle 10 1 30 8 -outline "#808080" -fill "#A0A0A0" -tags xmitrect
- .c create rectangle 10 10 30 18 -outline "#808080" -fill "#A0A0A0" -tags recvrect
-
- frame .buttons
- button .start -text "Start" -command "StartPPPoEConnection"
- button .stop -text "Stop" -command "StopPPPoEConnection"
- button .exit -text "Exit" -command "exit"
- canvas .graph -width 1 -height 1
- if {[file writable $ConnectionInfoFile]} {
- set Admin 1
- pack .f1 -side top -expand 1 -fill both
- pack .buttons -side top -expand 0 -fill x
- button .delete -text "Delete" -command "DeletePPPoEConnection"
- button .new -text "New Connection..." -command "NewPPPoEConnection"
- button .props -text "Properties..." -command "EditConnectionProps"
- pack .graph -in .f1 -side left -expand 1 -fill both
- pack .start .stop .delete .props .new .exit -in .buttons -side left -expand 0 -fill none
- } else {
- set Admin 0
- pack .f1 -side top -expand 0 -fill x
- pack .buttons -side top -expand 1 -fill both
- pack .start .stop .exit -in .buttons -side left -expand 0 -fill none
- pack .graph -in .buttons -side left -expand 1 -fill both
- }
-
- LoadConnectionInfo
- BuildConnectionMenu
- # If no connections exist, pop up new connection dialog
- if {[llength $ConnectionInfo] == 0} {
- SwitchConnection ""
- if {$Admin} {
- update idletasks
- NewPPPoEConnection
- } else {
- tk_dialog .note Note "Note: There are no connections defined. You must run this program as root to define connections" warning 0 OK
- }
- } else {
- set con [lindex $ConnectionInfo 0]
- set name [value $con ConnectionName]
- SwitchConnection $name
- }
-}
-
-#***********************************************************************
-# %PROCEDURE: GetCurrentConnection
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# The name of the current connection in the GUI.
-#***********************************************************************
-proc GetCurrentConnection {} {
- .m1 cget -text
-}
-
-#***********************************************************************
-# %PROCEDURE: value
-# %ARGUMENTS:
-# lst -- a list of key/value pairs
-# key -- key we're looking for
-# %RETURNS:
-# value corresponding to $key, or "" if not found.
-#***********************************************************************
-proc value { lst key } {
- set idx [lsearch -exact $lst $key]
- if {$idx >= 0} {
- return [lindex $lst [expr $idx+1]]
- }
- return ""
-}
-
-#***********************************************************************
-# %PROCEDURE: SwitchConnection
-# %ARGUMENTS:
-# name -- new connection name
-# %DESCRIPTION:
-# Makes $name the active connection
-#***********************************************************************
-proc SwitchConnection { name } {
- .m1 configure -text $name
- SetButtonStates
- UpdateConnectionState 0
-}
-
-#***********************************************************************
-# %PROCEDURE: EditConnectionProps
-# %ARGUMENTS:
-# None
-# %DESCRIPTION:
-# Pops up edit window for current connection
-#***********************************************************************
-proc EditConnectionProps {} {
- global ConnectionInfo
- set conn [GetCurrentConnection]
- NewPPPoEConnection $conn
-}
-
-#***********************************************************************
-# %PROCEDURE: FillConnectionGui
-# %ARGUMENTS:
-# w -- connection property GUI
-# name -- name of connection
-# %DESCRIPTION:
-# Fills GUI with values corresponding to $name.
-#***********************************************************************
-proc FillConnectionGui { w name } {
- global ConnectionInfo
- set found [GetConnection $name]
- if {"$found" != ""} {
- ListToSetupGui $w $found
- }
-}
-
-#***********************************************************************
-# %PROCEDURE: BuildConnectionMenu
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Builds the connection menu
-#***********************************************************************
-proc BuildConnectionMenu {} {
- global ConnectionInfo
- .m1.menu delete 0 end
- foreach connection $ConnectionInfo {
- set name [value $connection ConnectionName]
- .m1.menu add command -label $name -command [list SwitchConnection $name]
- }
- .m1.menu add separator
- .m1.menu add command -label "User's Manual" -command Help
-}
-
-#***********************************************************************
-# %PROCEDURE: SetButtonStates
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Enables or disables buttons, as appropriate
-#***********************************************************************
-proc SetButtonStates {} {
- global Admin
- set conn [GetCurrentConnection]
- if {"$conn" == ""} {
- .start configure -state disabled
- .stop configure -state disabled
- catch {
- .delete configure -state disabled
- .props configure -state disabled
- .new configure -state normal
- }
- } else {
- foreach {startstop updown interface} [GetConnectionStatus $conn] {break}
- if {"$startstop" == "started"} {
- .start configure -state disabled
- .stop configure -state normal
- } else {
- .start configure -state normal
- .stop configure -state disabled
- }
- catch {
- .delete configure -state normal
- .props configure -state normal
- .new configure -state normal
- }
- if {!$Admin} {
- set ok [value [GetConnection $conn] NonrootOK]
- if {!$ok} {
- .start configure -state disabled
- .stop configure -state disabled
- }
- }
- }
-}
-
-#***********************************************************************
-# %PROCEDURE: GetEthernetInterfaces
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# A list of Ethernet interfaces
-#***********************************************************************
-proc GetEthernetInterfaces {} {
- set ifs {}
- set fp [open "|/sbin/ifconfig" "r"]
- while {[gets $fp line] >= 0} {
- if {[regexp {^eth[0-9]+} $line eth]} {
- lappend ifs $eth
- }
- }
- return $ifs
-}
-
-#***********************************************************************
-# %PROCEDURE: StartPPPoEConnection
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Starts currently-selected PPPoE connection.
-#***********************************************************************
-proc StartPPPoEConnection {} {
- global Wrapper
- global StartState
- global UpdateToken
-
- set conn [GetCurrentConnection]
- if {"$conn" == ""} {
- return
- }
-
- if {"$UpdateToken" != ""} {
- after cancel $UpdateToken
- set UpdateToken ""
- }
-
- catch { unset StartState }
- set StartState(chars) ""
- set StartState(status) ""
- set StartState(msg) ""
- set StartState(flip) 0
-
- set fp [open "|$Wrapper start $conn" "r"]
-
- # Set fileevent
- fileevent $fp readable [list StartFPReadable $fp]
-
- LockGui $fp
- vwait StartState(status)
- UnlockGui
-
- if {$StartState(status) == "failed"} {
- tk_dialog .err Error "Error starting connection: $StartState(msg)" error 0 OK
- }
- SetButtonStates
- UpdateConnectionState 0
-}
-
-proc LockGui { fp } {
- .start configure -state disabled
- .stop configure -state normal -command [list AbortConnection $fp]
- .exit configure -state disabled
- .m1 configure -state disabled
- grab set .stop
-}
-
-proc UnlockGui {} {
- .start configure -state normal
- .stop configure -state disabled -command StopPPPoEConnection
- .exit configure -state normal
- .m1 configure -state normal
- grab release .stop
-}
-
-proc AbortConnection { fp } {
- global StartState
- catch { StopPPPoEConnection }
- catch { close $fp }
- set StartState(msg) "Connection aborted by user"
- set StartState(status) "failed"
-}
-
-#***********************************************************************
-# %PROCEDURE: StartFPReadable
-# %ARGUMENTS:
-# fp -- file handle
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Called when the "adsl-start" file handle is readable.
-#***********************************************************************
-proc StartFPReadable { fp } {
- global StartState
- set char [read $fp 1]
- if {$char == ""} {
- set uhoh [catch {close $fp} err]
- if {$uhoh} {
- set StartState(status) "failed"
- set StartState(msg) $err
- } else {
- set StartState(status) "succeeded"
- }
- return
- }
- append StartState(chars) $char
- if {$StartState(flip)} {
- ConnectionStateDown
- } else {
- ConnectionStateOff
- }
- set StartState(flip) [expr 1 - $StartState(flip)]
-}
-
-#***********************************************************************
-# %PROCEDURE: StopPPPoEConnection
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Stops currently-selected PPPoE connection.
-#***********************************************************************
-proc StopPPPoEConnection {} {
- global Wrapper
- set conn [GetCurrentConnection]
- if {"$conn" == ""} {
- return
- }
- set fp [open "|$Wrapper stop $conn" "r"]
- while {1} {
- set char [read $fp 1]
- if {"$char" == ""} {
- break;
- }
- }
- set uhoh [catch {close $fp} err]
- if {$uhoh} {
- # Ignore a common error
- if {![string match "*appears to have died*" $err]} {
- tk_dialog .err Error "Error stopping connection: $err" error 0 OK
- }
- }
- SetButtonStates
- UpdateConnectionState 0
-}
-
-#***********************************************************************
-# %PROCEDURE: NewPPPoEConnection
-# %ARGUMENTS:
-# name -- if supplied, we're editing the existing connection "name"
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Creates a new PPPoE connection
-#***********************************************************************
-proc NewPPPoEConnection {{name ""}} {
- set w .newcon
- if {[winfo exists $w]} {
- wm deiconify $w
- raise $w
- return
- }
-
- toplevel $w
- if {"$name" == ""} {
- wm title $w "New Connection - RP-PPPoE"
- wm iconname $w "New Connection"
- } else {
- wm title $w "Edit Connection - RP-PPPoE"
- wm iconname $w "Edit Connection"
- }
- wm withdraw $w
-
- tabnotebook_create $w.tn
- set basic [tabnotebook_page $w.tn "Basic"]
- set interface [tabnotebook_page $w.tn "NIC and DNS"]
- set opts [tabnotebook_page $w.tn "Options"]
- set advanced [tabnotebook_page $w.tn "Advanced"]
-
- # ----------- BASIC PAGE -------------
- label $w.lconName -text "Connection Name: " -anchor e
- if {"$name" != ""} {
- label $w.conName -text $name -anchor w
- } else {
- entry $w.conName -width 15
- RegisterHelpWindow $w.lconName "Enter a name for this connection. It can contain letters, numbers, undescores and the minus-sign." $w.help
- RegisterHelpWindow $w.conName "Enter a name for this connection. It can contain letters, numbers, undescores and the minus-sign." $w.help
- }
-
- label $w.luser -text "User Name: " -anchor e
- entry $w.user -width 15
- RegisterHelpWindow $w.luser "Enter your user name. Do not add a domain-name after the user name." $w.help
- RegisterHelpWindow $w.user "Enter your user name. Do not add a domain-name after the user name." $w.help
-
- label $w.lnet -text "Network: " -anchor e
- entry $w.network -width 15
- RegisterHelpWindow $w.lnet "Some ISP's require you to enter their domain-name here (e.g. \"sympatico.ca\")." $w.help
- RegisterHelpWindow $w.network "Some ISP's require you to enter their domain-name here (e.g. \"sympatico.ca\")." $w.help
-
- label $w.lpass -text "Password: " -anchor e
- entry $w.pass -width 15 -show "*"
- RegisterHelpWindow $w.lpass "Enter your password." $w.help
- RegisterHelpWindow $w.pass "Enter your password." $w.help
-
- grid $w.lconName $w.conName -in $basic -sticky nsew
- grid $w.luser $w.user -in $basic -sticky nsew
- grid $w.lnet $w.network -in $basic -sticky nsew
- grid $w.lpass $w.pass -in $basic -sticky nsew
- grid columnconfigure $basic 1 -weight 1
-
- # ----------- INTERFACES PAGE -------------
- set ifs {}
- catch {set ifs [GetEthernetInterfaces]}
-
- label $w.lifname -text "Ethernet Interface: " -anchor e
- entry $w.ifname -width 8
- RegisterHelpWindow $w.lifname "Enter Ethernet interface to which DSL modem is attached." $w.help
- RegisterHelpWindow $w.ifname "Enter Ethernet interface to which DSL modem is attached." $w.help
-
- if {[llength $ifs] > 0} {
- menubutton $w.ifmb -relief raised -text "..." -menu $w.ifmb.menu
- RegisterHelpWindow $w.ifmb "Browse detected Ethernet interface names." $w.help
- menu $w.ifmb.menu -tearoff 0
- foreach if $ifs {
- $w.ifmb.menu add command -label $if -command "$w.ifname delete 0 end; $w.ifname insert end [list $if]"
- }
- grid $w.lifname $w.ifname $w.ifmb -in $interface -sticky nsew
- } else {
- grid $w.lifname $w.ifname - -in $interface -sticky nsew
- }
-
- label $w.ldns -text "DNS Setup: " -anchor e
- menubutton $w.dns -text "From Server" -menu $w.dns.menu -relief raised -indicatoron 1
- menu $w.dns.menu -tearoff 0
- foreach thing {"From Server" "Specify" "Do not Adjust"} {
- $w.dns.menu add command -label $thing -command [list SetDNSOption $w $thing]
- }
- RegisterHelpWindow $w.ldns "DNS server options:\n'From Server' - Let PPPoE server specify DNS servers\n'Specify' - Enter IP addresses of DNS servers yourself\n'Do not Adjust' - Leave your DNS setup alone." $w.help
- RegisterHelpWindow $w.dns "DNS server options:\n'From Server' - Let PPPoE server specify DNS servers\n'Specify' - Enter IP addresses of DNS servers yourself\n'Do not Adjust' - Leave your DNS setup alone." $w.help
-
- label $w.ldns1 -text "Primary DNS: " -anchor e
- entry $w.dns1 -width 16
- RegisterHelpWindow $w.ldns1 "Enter the IP address of the primary DNS server." $w.help
- RegisterHelpWindow $w.dns1 "Enter the IP address of the primary DNS server." $w.help
- label $w.ldns2 -text "Secondary DNS: " -anchor e
- entry $w.dns2 -width 16
- RegisterHelpWindow $w.ldns2 "Enter the IP address of the secondary DNS server." $w.help
- RegisterHelpWindow $w.dns2 "Enter the IP address of the secondary DNS server." $w.help
-
- SetDNSOption $w "From Server"
- grid $w.ldns $w.dns - -in $interface -sticky nsew
- grid $w.ldns1 $w.dns1 - -in $interface -sticky nsew
- grid $w.ldns2 $w.dns2 - -in $interface -sticky nsew
-
- # If only one Ethernet interface, select it by default
- if {[llength $ifs] == 1} {
- $w.ifname insert end [lindex $ifs 0]
- }
-
- grid columnconfigure $interface 1 -weight 1
- # ----------- OPTS PAGE -------------
- checkbutton $w.nonroot -text "Allow use by non-root users" -variable OPTS(nonroot) -anchor w
- RegisterHelpWindow $w.nonroot "If enabled, ordinary users can start and stop this connection." $w.help
- checkbutton $w.sync -text "Use synchronous PPP" -variable OPTS(sync) -anchor w
- RegisterHelpWindow $w.sync "Use synchronous PPP (recommended -- easier on the CPU.)" $w.help
- label $w.lfw -text "Firewalling: " -anchor e
- if {[llength $ifs] == 1} {
- set defaultFW "Stand-Alone"
- } else {
- set defaultFW "Masquerading"
- }
- menubutton $w.fw -text $defaultFW -menu $w.fw.menu -indicatoron 1 -relief raised
- menu $w.fw.menu -tearoff 0
- foreach type {Stand-Alone Masquerading None} {
- $w.fw.menu add command -label $type -command [list $w.fw configure -text $type]
- }
-
- RegisterHelpWindow $w.lfw "Firewalling options:\nStand-Alone - A stand-alone machine.\nMasquerading - A gateway machine used for Internet sharing.\nNone - Use if you already have your own firewall rules or want to run servers." $w.help
- RegisterHelpWindow $w.fw "Firewalling options:\nStand-Alone - A stand-alone machine.\nMasquerading - A gateway machine used for Internet sharing.\nNone - Use if you already have your own firewall rules or want to run servers." $w.help
- grid $w.nonroot - -in $opts -sticky nsew
- grid $w.sync - -in $opts -sticky nsew
- grid $w.lfw $w.fw -in $opts -sticky nsw
- grid columnconfigure $opts 1 -weight 1
-
- # ----------- ADVANCED PAGE -------------
- label $w.lsn -text "Service-Name: " -anchor e
- entry $w.servicename -width 24
-
- label $w.lac -text "AC-Name: " -anchor e
- entry $w.acname -width 24
-
- RegisterHelpWindow $w.lac "Enter access concentrator name if required. Most ISPs do not require this; try leaving it blank." $w.help
- RegisterHelpWindow $w.acname "Enter access concentrator name if required. Most ISPs do not require this; try leaving it blank." $w.help
- grid $w.lsn $w.servicename -in $advanced -sticky nsew
- grid $w.lac $w.acname -in $advanced -sticky nsew
- RegisterHelpWindow $w.lsn "Enter service name if required. Most ISPs do not require this; try leaving it blank." $w.help
- RegisterHelpWindow $w.servicename "Enter service name if required. Most ISPs do not require this; try leaving it blank." $w.help
-
- grid columnconfigure $advanced 1 -weight 1
-
- # ----------- BUTTONS -------------
- frame $w.buttons
- button $w.ok -text "OK" -command [list NewPPPoEConnectionOK $name $w]
- button $w.cancel -text "Cancel" -command [list destroy $w]
- pack $w.ok $w.cancel -in $w.buttons -expand 0 -fill none -side left
-
- pack $w.tn -side top -expand 1 -fill both
-
- text $w.help -width 60 -wrap word -state disabled -height 6
- pack $w.help -side top -expand 0 -fill both
- pack $w.buttons -side top -expand 0 -fill x
-
- # If we're editing existing connection, fill GUI with current values
- if {"$name" != ""} {
- FillConnectionGui $w $name
- }
- wm deiconify $w
- update idletasks
- raise $w
-}
-
-#***********************************************************************
-# %PROCEDURE: SetDNSOption
-# %ARGUMENTS:
-# w -- connection-editing window
-# opt -- value of DNS option
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Adjusts GUI for specified option
-#***********************************************************************
-proc SetDNSOption { w opt } {
- $w.dns configure -text $opt
- if {"$opt" == "Specify"} {
- $w.dns1 configure -state normal -background white
- $w.dns2 configure -state normal -background white
- } else {
- $w.dns1 configure -state disabled -background "#d9d9d9"
- $w.dns2 configure -state disabled -background "#d9d9d9"
- }
-}
-
-# ----------------------------------------------------------------------
-# Tabbed notebook code from "Effective Tcl/Tk Programming"
-# ----------------------------------------------------------------------
-# EXAMPLE: tabnotebook that can dial up pages
-# ----------------------------------------------------------------------
-# Effective Tcl/Tk Programming
-# Mark Harrison, DSC Communications Corp.
-# Michael McLennan, Bell Labs Innovations for Lucent Technologies
-# Addison-Wesley Professional Computing Series
-# ======================================================================
-# Copyright (c) 1996-1997 Lucent Technologies Inc. and Mark Harrison
-# ======================================================================
-
-option add *Tabnotebook.tabs.background #666666 widgetDefault
-option add *Tabnotebook.margin 6 widgetDefault
-option add *Tabnotebook.tabColor #a6a6a6 widgetDefault
-option add *Tabnotebook.activeTabColor #d9d9d9 widgetDefault
-option add *Tabnotebook.tabFont \
- -*-helvetica-bold-r-normal--*-120-* widgetDefault
-
-proc tabnotebook_create {win} {
- global tnInfo
-
- frame $win -class Tabnotebook
- canvas $win.tabs -highlightthickness 0
- pack $win.tabs -fill x
-
- notebook_create $win.notebook
- pack $win.notebook -expand yes -fill both
-
- set tnInfo($win-tabs) ""
- set tnInfo($win-current) ""
- set tnInfo($win-pending) ""
- return $win
-}
-
-proc tabnotebook_page {win name} {
- global tnInfo
-
- set page [notebook_page $win.notebook $name]
- lappend tnInfo($win-tabs) $name
-
- if {$tnInfo($win-pending) == ""} {
- set id [after idle [list tabnotebook_refresh $win]]
- set tnInfo($win-pending) $id
- }
- return $page
-}
-
-proc tabnotebook_refresh {win} {
- global tnInfo
-
- $win.tabs delete all
-
- set margin [option get $win margin Margin]
- set color [option get $win tabColor Color]
- set font [option get $win tabFont Font]
- set x 2
- set maxh 0
-
- foreach name $tnInfo($win-tabs) {
- set id [$win.tabs create text \
- [expr $x+$margin+2] [expr -0.5*$margin] \
- -anchor sw -text $name -font $font \
- -tags [list $name]]
-
- set bbox [$win.tabs bbox $id]
- set wd [expr [lindex $bbox 2]-[lindex $bbox 0]]
- set ht [expr [lindex $bbox 3]-[lindex $bbox 1]]
- if {$ht > $maxh} {
- set maxh $ht
- }
-
- $win.tabs create polygon 0 0 $x 0 \
- [expr $x+$margin] [expr -$ht-$margin] \
- [expr $x+$margin+$wd] [expr -$ht-$margin] \
- [expr $x+$wd+2*$margin] 0 \
- 2000 0 2000 10 0 10 \
- -outline black -fill $color \
- -tags [list $name tab tab-$name]
-
- $win.tabs raise $id
-
- $win.tabs bind $name <ButtonPress-1> \
- [list tabnotebook_display $win $name]
-
- set x [expr $x+$wd+2*$margin]
- }
- set height [expr $maxh+2*$margin]
- $win.tabs move all 0 $height
-
- $win.tabs configure -width $x -height [expr $height+4]
-
- if {$tnInfo($win-current) != ""} {
- tabnotebook_display $win $tnInfo($win-current)
- } else {
- tabnotebook_display $win [lindex $tnInfo($win-tabs) 0]
- }
- set tnInfo($win-pending) ""
-}
-
-proc tabnotebook_display {win name} {
- global tnInfo
-
- notebook_display $win.notebook $name
-
- set normal [option get $win tabColor Color]
- $win.tabs itemconfigure tab -fill $normal
-
- set active [option get $win activeTabColor Color]
- $win.tabs itemconfigure tab-$name -fill $active
- $win.tabs raise $name
-
- set tnInfo($win-current) $name
-}
-
-# ----------------------------------------------------------------------
-# EXAMPLE: simple notebook that can dial up pages
-# ----------------------------------------------------------------------
-# Effective Tcl/Tk Programming
-# Mark Harrison, DSC Communications Corp.
-# Michael McLennan, Bell Labs Innovations for Lucent Technologies
-# Addison-Wesley Professional Computing Series
-# ======================================================================
-# Copyright (c) 1996-1997 Lucent Technologies Inc. and Mark Harrison
-# ======================================================================
-
-option add *Notebook.borderWidth 2 widgetDefault
-option add *Notebook.relief sunken widgetDefault
-
-proc notebook_create {win} {
- global nbInfo
-
- frame $win -class Notebook
- pack propagate $win 0
-
- set nbInfo($win-count) 0
- set nbInfo($win-pages) ""
- set nbInfo($win-current) ""
- return $win
-}
-
-proc notebook_page {win name} {
- global nbInfo
-
- set page "$win.page[incr nbInfo($win-count)]"
- lappend nbInfo($win-pages) $page
- set nbInfo($win-page-$name) $page
-
- frame $page
-
- if {$nbInfo($win-count) == 1} {
- after idle [list notebook_display $win $name]
- }
- return $page
-}
-
-proc notebook_display {win name} {
- global nbInfo
-
- set page ""
- if {[info exists nbInfo($win-page-$name)]} {
- set page $nbInfo($win-page-$name)
- } elseif {[winfo exists $win.page$name]} {
- set page $win.page$name
- }
- if {$page == ""} {
- error "bad notebook page \"$name\""
- }
-
- notebook_fix_size $win
-
- if {$nbInfo($win-current) != ""} {
- pack forget $nbInfo($win-current)
- }
- pack $page -expand yes -fill both
- set nbInfo($win-current) $page
-}
-
-proc notebook_fix_size {win} {
- global nbInfo
-
- update idletasks
-
- set maxw 0
- set maxh 0
- foreach page $nbInfo($win-pages) {
- set w [winfo reqwidth $page]
- if {$w > $maxw} {
- set maxw $w
- }
- set h [winfo reqheight $page]
- if {$h > $maxh} {
- set maxh $h
- }
- }
- set bd [$win cget -borderwidth]
- set maxw [expr $maxw+2*$bd]
- set maxh [expr $maxh+2*$bd]
- $win configure -width $maxw -height $maxh
-}
-
-#***********************************************************************
-# %PROCEDURE: SetupGuiToList
-# %ARGUMENTS:
-# w -- the PPPoE connection setup window
-# %RETURNS:
-# A list of (name value) pairs for the connection.
-# %DESCRIPTION:
-# Reads values from the GUI; makes a list.
-#***********************************************************************
-proc SetupGuiToList { w } {
- global OPTS
- set ans {}
- if {[catch {lappend ans ConnectionName [$w.conName get]}]} {
- lappend ans ConnectionName [$w.conName cget -text]
- }
- lappend ans UserName [$w.user get]
- lappend ans NetworkName [$w.network get]
- lappend ans Password [$w.pass get]
- lappend ans Interface [$w.ifname get]
- lappend ans DNSType [$w.dns cget -text]
- lappend ans DNS1 [$w.dns1 get]
- lappend ans DNS2 [$w.dns2 get]
- lappend ans NonrootOK $OPTS(nonroot)
- lappend ans Sync $OPTS(sync)
- lappend ans FirewallType [$w.fw cget -text]
- lappend ans ServiceName [$w.servicename get]
- lappend ans ACName [$w.acname get]
-
- # Validate
- set name [value $ans ConnectionName]
- if {![regexp -nocase {^[-a-z0-9_]+$} $name]} {
- error "Connection name must be non-blank and contain only letters, digits, `_' and `-'"
- }
-
- # Check DNS
- set type [value $ans DNSType]
- if {"$type" == "Specify"} {
- set dns [value $ans DNS1]
- if {![regexp {[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+} "$dns"]} {
- error "Primary DNS entry must consist of four dot-separated decimal numbers"
- }
- set dns [value $ans DNS2]
- if {"$dns" != "" && ![regexp {[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+} "$dns"]} {
- error "Secondary DNS entry must consist of four dot-separated decimal numbers"
- }
- }
- return $ans
-}
-
-#***********************************************************************
-# %PROCEDURE: ListToSetupGui
-# %ARGUMENTS:
-# w -- the PPPoE connection setup window
-# lst -- a list of name/value pairs
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Updates GUI to reflect lst
-#***********************************************************************
-proc ListToSetupGui { w lst } {
- global OPTS
- foreach {key value} $lst {
- switch -exact -- $key {
- ConnectionName {
- catch {
- $w.conName delete 0 end
- $w.conName insert end $value
- }
- catch {
- $w.conName configure -text $value
- }
- }
- UserName {
- $w.user delete 0 end
- $w.user insert end $value
- }
- NetworkName {
- $w.network delete 0 end
- $w.network insert end $value
- }
- Password {
- $w.pass delete 0 end
- $w.pass insert end $value
- }
- Interface {
- $w.ifname delete 0 end
- $w.ifname insert end $value
- }
- DNSType {
- SetDNSOption $w $value
- }
- DNS1 {
- set oldstate [$w.dns1 cget -state]
- $w.dns1 configure -state normal
- $w.dns1 delete 0 end
- $w.dns1 insert end $value
- $w.dns1 configure -state $oldstate
- }
- DNS2 {
- set oldstate [$w.dns2 cget -state]
- $w.dns2 configure -state normal
- $w.dns2 delete 0 end
- $w.dns2 insert end $value
- $w.dns2 configure -state $oldstate
- }
- NonrootOK {
- set OPTS(nonroot) $value
- }
- Sync {
- set OPTS(sync) $value
- }
- FirewallType {
- $w.fw configure -text $value
- }
- ServiceName {
- $w.servicename delete 0 end
- $w.servicename insert end $value
- }
- ACName {
- $w.acname delete 0 end
- $w.acname insert end $value
- }
- }
- }
-}
-
-proc NewPPPoEConnectionOK { name w } {
- if {[catch {set conn [SetupGuiToList $w]} err]} {
- tk_dialog .err "Invalid Parameters" "$err" error 0 OK
- return
- }
- if {"$name" == ""} {
- set name [value $conn ConnectionName]
- set tmp [GetConnection $name]
- if {"$tmp" != ""} {
- tk_dialog .err "Connection Exists" "The connection `$name' already exists. Pick another name." error 0 OK
- return
- }
- }
- ReplaceConnection $conn
- SaveConnectionInfo
- BuildConnectionMenu
- SwitchConnection $name
- destroy $w
-}
-
-proc SaveConnectionInfo {} {
- global ConnectionInfo ConnectionInfoFile PasswordFile
- set fp [open "$ConnectionInfoFile.new" "w"]
- puts $fp "# RP-PPPoE GUI Configuration Information."
- puts $fp "# This file may *look* human-editable, but it is NOT."
- puts $fp "# So, you with the text editor: Keep away from this file."
- puts $fp "#"
- set expunged {}
- set passwords {}
- foreach thing $ConnectionInfo {
- set name [value $thing ConnectionName]
- set password [value $thing Password]
- set pwindex [lsearch -exact $thing Password]
- set safe [lreplace $thing $pwindex [expr $pwindex+1]]
- set pwd [list ConnectionName $name Password $password]
- lappend expunged $safe
- lappend passwords $pwd
- }
- puts $fp $expunged
- close $fp
- set fp [open "$PasswordFile.new" "w"]
- exec chmod 600 "$PasswordFile.new"
- puts $fp "# RP-PPPoE GUI Configuration Information."
- puts $fp "# This file may *look* human-editable, but it is NOT."
- puts $fp "# So, you with the text editor: Keep away from this file."
- puts $fp "#"
- puts $fp $passwords
- close $fp
- file rename -force "$ConnectionInfoFile.new" "$ConnectionInfoFile"
- file rename -force "$PasswordFile.new" "$PasswordFile"
-
- # Generate config files for adsl-start for each connection
- foreach thing $ConnectionInfo {
- GenerateConfigFile $thing
- }
-
- # Now update /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
- foreach thing $ConnectionInfo {
- GenerateSecretsEntry $thing
- }
-}
-
-#***********************************************************************
-# %PROCEDURE: ReadShellEscapedWord
-# %ARGUMENTS:
-# str -- a string
-# %RETURNS:
-# A two-element list -- the first element is a shell-escaped word
-# extracted from $str, just the way pppd parses /etc/ppp/pap-secrets.
-# The second element is the remaining portion of $str
-#***********************************************************************
-proc ReadShellEscapedWord { str } {
- set ans {}
- set rest $str
-
- # Chew up leading spaces
- set rest [string trimleft $rest]
-
- # If first char is a quote, read until a quote
- if {"[string index $rest 0]" == "\""} {
- set rest [string range $rest 1 end]
- set nextquote [string first "\"" $rest]
- # If no following quote, pretend we haven't seen a quote, I guess.
- if {$nextquote >= 0} {
- set ans [string range $rest 0 [expr $nextquote-1]]
- set rest [string range $rest [expr $nextquote+1] end]
- return [list $ans $rest]
- }
- }
-
- # Not a quote; chew through the string until an unescaped space
- while {[string length $rest] > 0} {
- set char [string index $rest 0]
- set rest [string range $rest 1 end]
- # Sneaky test for whitespace in Tcl 8.0
- if {"[string trim $char]" == ""} {
- return [list $ans $rest]
- }
- if {"$char" == "\\"} {
- set char [string index $rest 0]
- set rest [string range $rest 1 end]
- }
- append ans $char
- }
- return [list $ans $rest]
-}
-
-
-#***********************************************************************
-# %PROCEDURE: GenerateSecretsEntry
-# %ARGUMENTS:
-# conn -- a connection key/value list
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Adds entries to /etc/ppp/pap-secrets and /etc/ppp/chap-secrets.
-#***********************************************************************
-proc GenerateSecretsEntry { conn } {
- set user [value $conn UserName]
- set net [value $conn NetworkName]
- set password [value $conn Password]
- if {"$net" != ""} {
- set user "$user@$net"
- }
- GenerateSecretsEntryForFile $user $password "/etc/ppp/pap-secrets"
- GenerateSecretsEntryForFile $user $password "/etc/ppp/chap-secrets"
-}
-
-#***********************************************************************
-# %PROCEDURE: GenerateSecretsEntryForFile
-# %ARGUMENTS:
-# user -- user name
-# password -- password
-# fname -- file to add entry to.
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Adds entries to /etc/ppp/pap-secrets or /etc/ppp/chap-secrets.
-#***********************************************************************
-proc GenerateSecretsEntryForFile { user password fname } {
- # Copy $fname to $fname.new
- set out [open "$fname.new" "w"]
- exec chmod go-rwx "$fname.new"
- if {[file exists $fname]} {
- set in [open $fname "r"]
- while {[gets $in line] >= 0} {
- set trimmed [string trim $line]
- if {"$trimmed" == ""} {
- puts $out $line
- continue
- }
- if {[string match "#*" $trimmed]} {
- puts $out $line
- continue
- }
-
- # Read the user name off the line; copy it unless it's our
- # user name.
- foreach {word dummy} [ReadShellEscapedWord $line] {break}
- if {$word != $user} {
- puts $out $line
- }
- }
- close $in
- }
-
- # Now add our line
- set user [ShellEscape $user]
- set password [ShellEscape $password]
- puts $out "$user\t*\t$password\t*"
- close $out
- file rename -force $fname.new $fname
-}
-
-#***********************************************************************
-# %PROCEDURE: ShellEscape
-# %ARGUMENTS:
-# str
-# %RETURNS:
-# A version of $str with shell meta-characters escaped
-#***********************************************************************
-proc ShellEscape { str } {
- set ans ""
- foreach char [split $str ""] {
- if {[string first $char "01234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_+=-@./"] >= 0} {
- append ans $char
- } else {
- append ans "\\$char"
- }
- }
- return $ans
-}
-
-
-#***********************************************************************
-# %PROCEDURE: GenerateConfigFile
-# %ARGUMENTS:
-# conn -- a connection key/value list
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Generates a configuration file for adsl-start and friends under
-# /etc/ppp/rp-pppoe-gui
-#***********************************************************************
-proc GenerateConfigFile { conn } {
- global ConfigDir
- set name [value $conn ConnectionName]
- set fname [file join $ConfigDir conf.$name]
- set fp [open "$fname.new" w]
- puts $fp "# Configuration file for connection `$name'."
- puts $fp "# Automatically generated. Do not edit by hand."
- puts $fp ""
- foreach {var val} $conn {
- switch -exact $var {
- UserName {
- set net [value $conn NetworkName]
- if {"$net" != ""} {
- set user "$val@$net"
- } else {
- set user "$val"
- }
- puts $fp [ShellEscape "USER=$user"]
- }
- Interface {
- puts $fp [ShellEscape "ETH=$val"]
- }
- DNSType {
- if {"$val" == "From Server"} {
- puts $fp "DNSTYPE=SERVER"
- puts $fp "USEPEERDNS=yes"
- } elseif {"$val" == "Specify"} {
- puts $fp "DNSTYPE=SPECIFY"
- puts $fp "USEPEERDNS=no"
- } else {
- puts $fp "DNSTYPE=NOCHANGE"
- puts $fp "USEPEERDNS=no"
- }
- }
- DNS1 {
- puts $fp [ShellEscape "DNS1=$val"]
- }
- DNS2 {
- puts $fp [ShellEscape "DNS2=$val"]
- }
- NonrootOK {
- if {$val} {
- puts $fp "NONROOT=OK"
- }
- }
- ACName {
- puts $fp [ShellEscape "ACNAME=$val"]
- }
- ServiceName {
- puts $fp [ShellEscape "SERVICENAME=$val"]
- }
- FirewallType {
- if {"$val" == "None"} {
- puts $fp "FIREWALL=NONE"
- } elseif {"$val" == "Masquerading"} {
- puts $fp "FIREWALL=MASQUERADE"
- } else {
- puts $fp "FIREWALL=STANDALONE"
- }
- }
- Sync {
- if {$val} {
- puts $fp "SYNCHRONOUS=yes"
- } else {
- puts $fp "SYNCHRONOUS=no"
- }
- }
- }
- }
- puts $fp "CONNECT_TIMEOUT=30"
- puts $fp "CONNECT_POLL=1"
- puts $fp "FORCEPING=\".\""
- puts $fp "PIDFILE=/var/run/adsl-$name.pid"
- puts $fp "CLAMPMSS=1412"
- puts $fp "LCP_INTERVAL=20"
- puts $fp "LCP_FAILURE=3"
- puts $fp "PPPOE_TIMEOUT=80"
- puts $fp "LINUX_PLUGIN="
- puts $fp "DEMAND=no"
- close $fp
- file rename -force "$fname.new" "$fname"
-}
-
-#***********************************************************************
-# %PROCEDURE: GetConnectionStatus
-# %ARGUMENTS:
-# conn -- connection name
-# %RETURNS:
-# A three-element list:
-# {started/stopped up/down if}
-# If first element is "started", then connection has been started.
-# If second element is "up", then connection is up.
-# If connection is up, third element is PPP interface.
-#***********************************************************************
-proc GetConnectionStatus { conn } {
- set pidfile "/var/run/adsl-$conn.pid"
-
- # Check for PID file
- if {![file readable $pidfile]} {
- return {stopped down ""}
- }
- set fp [open $pidfile "r"]
- gets $fp pid
- close $fp
-
- # Check if process is dead
- if {![file exists "/proc/$pid"]} {
- # The pppd might still be running... doh...
- if {![file readable "$pidfile.pppd"]} {
- return {stopped down ""}
- }
- set fp [open "$pidfile.pppd" "r"]
- gets $fp pid
- close $fp
- if {![file exists "/proc/$pid"]} {
- return {stopped down ""}
- }
- }
-
- # Now get PID of pppd
- if {![file readable "$pidfile.pppd"]} {
- return {started down ""}
- }
- set fp [open "$pidfile.pppd" "r"]
- gets $fp pid
- close $fp
-
- # Find interface to which it corresponds
- set pppdfiles [glob -nocomplain "/var/run/ppp*.pid"]
- set found {}
- foreach file $pppdfiles {
- set fp [open $file "r"]
- gets $fp ifpid
- close $fp
- if {$ifpid == $pid} {
- set found [file rootname [file tail $file]]
- break
- }
- }
- if {"$found" == ""} {
- return {started down ""}
- }
- return [list started up $found]
-}
-
-#***********************************************************************
-# %PROCEDURE: UpdateConnectionState
-# %ARGUMENTS:
-# fromAfter -- if 1, was called from an "after" callback.
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Updates the "LED" displays; periodically reschedules itself to keep
-# updating display.
-#***********************************************************************
-proc UpdateConnectionState {{fromAfter 1}} {
- global UpdateToken
- global Packets
- global Bytes
- global UpdateInterval
- global MeasureTime
- if {$fromAfter} {
- set UpdateToken ""
- }
-
- set conn [GetCurrentConnection]
- if {"$conn" == ""} {
- ConnectionStateOff
- ResetGraph
- if {"$UpdateToken" != ""} {
- after cancel $UpdateToken
- set UpdateToken {}
- }
- return
- }
-
- foreach {startstop updown interface} [GetConnectionStatus $conn] {break}
- if {"$startstop" == "stopped"} {
- ConnectionStateOff
- ResetGraph
- } elseif {"$updown" == "down"} {
- ConnectionStateDown
- ResetGraph
- } else {
- # Get the packet counts
- set found 0
- set fp [open "/proc/net/dev" "r"]
- while {[gets $fp line] >= 0} {
- if {![string match "*$interface:*" $line]} {
- continue
- }
- set colon [string first ":" $line]
- if {$colon < 0} {
- continue
- }
- set line [string range $line [expr $colon+1] end]
- set found 1
- set MeasureTime [clock seconds]
- break
- }
- close $fp
- if {$found} {
- foreach {rbytes rpacks rerrs rdrop rfifo rframe rcomp rmulti tbytes tpacks} $line {break}
- if {!$fromAfter} {
- set Packets(in) $rpacks
- set Packets(out) $tpacks
- set Bytes(in) $rbytes
- set Bytes(out) $tbytes
- ConnectionStateUp
- ResetGraph
- } else {
- if {$rpacks != $Packets(in)} {
- ConnectionReceiveActive
- } else {
- ConnectionReceiveUp
- }
- if {$tpacks != $Packets(out)} {
- ConnectionTransmitActive
- } else {
- ConnectionTransmitUp
- }
- set Packets(in) $rpacks
- set Packets(out) $tpacks
- set Bytes(in) $rbytes
- set Bytes(out) $tbytes
- UpdateGraph
- }
- } else {
- ConnectionStateUp
- ResetGraph
- }
- }
- if {"$UpdateToken" == ""} {
- set UpdateToken [after $UpdateInterval UpdateConnectionState]
- }
- if {$fromAfter} {
- SetButtonStates
- }
-}
-
-proc ConnectionStateOff {} {
- .c itemconfigure xmitrect -fill "#A0A0A0"
- .c itemconfigure recvrect -fill "#A0A0A0"
-}
-
-proc ConnectionStateDown {} {
- .c itemconfigure xmitrect -fill "#A00000"
- .c itemconfigure recvrect -fill "#A00000"
-}
-
-proc ConnectionStateUp {} {
- .c itemconfigure xmitrect -fill "#00D000"
- .c itemconfigure recvrect -fill "#00D000"
-}
-
-proc ConnectionTransmitActive {} {
- .c itemconfigure xmitrect -fill "#FFFF00"
-}
-
-proc ConnectionTransmitUp {} {
- .c itemconfigure xmitrect -fill "#00D000"
-}
-
-proc ConnectionReceiveActive {} {
- .c itemconfigure recvrect -fill "#FFFF00"
-}
-
-proc ConnectionReceiveUp {} {
- .c itemconfigure recvrect -fill "#00D000"
-}
-
-proc ResetGraph {} {
- global GraphPoints
- set GraphPoints(in) {}
- set GraphPoints(out) {}
- set GraphPoints(times) {}
- .graph delete all
- UpdateGraph
-}
-
-proc UpdateGraph {} {
- global GraphPoints Bytes UpdateInterval MeasureTime
- lappend GraphPoints(times) $MeasureTime
- lappend GraphPoints(in) $Bytes(in)
- lappend GraphPoints(out) $Bytes(out)
-
- set w [winfo width .graph]
- set w2 [expr $w/2]
-
- set h [winfo height .graph]
- set toChop [expr [llength $GraphPoints(in)] - $w2 - 1]
- if {$toChop > 0} {
- set GraphPoints(in) [lrange $GraphPoints(in) $toChop end]
- }
- set toChop [expr [llength $GraphPoints(out)] - $w2 - 1]
- if {$toChop > 0} {
- set GraphPoints(out) [lrange $GraphPoints(out) $toChop end]
- }
- set toChop [expr [llength $GraphPoints(times)] - $w2 - 1]
- if {$toChop > 0} {
- set GraphPoints(times) [lrange $GraphPoints(times) $toChop end]
- }
-
- set prev [lindex $GraphPoints(in) 0]
- set incoords {}
- set outcoords {}
- set inmax 0
- set outmax 0
- foreach thing [lrange $GraphPoints(in) 1 end] {
- set diff [expr $thing - $prev]
- set prev $thing
- lappend incoords $diff
- if {$diff > $inmax} {
- set inmax $diff
- }
- }
-
- set prev [lindex $GraphPoints(out) 0]
- foreach thing [lrange $GraphPoints(out) 1 end] {
- set diff [expr $thing - $prev]
- set prev $thing
- lappend outcoords $diff
- if {$diff > $outmax} {
- set outmax $diff
- }
- }
-
- if {$inmax == 0} { set inmax 1 }
- if {$outmax == 0} { set outmax 1 }
- # Draw the transmit line
- set x 0
- set hh [expr $h-4]
- set scaled {}
- foreach thing $outcoords {
- lappend scaled $x [expr double($h) - 2 - (double($hh) * double($thing) / double($outmax))]
- incr x
- }
-
- .graph delete all
- if {[llength $scaled] >= 4} {
- eval ".graph create line $scaled -fill #A00000"
- set bits [expr 8.0 * ([lindex $GraphPoints(out) end] - [lindex $GraphPoints(out) 0])]
- set timediff [expr [lindex $GraphPoints(times) end] - [lindex $GraphPoints(times) 0]]
- if {$timediff != 0} {
- set bps [Pretty [expr double($bits) / $timediff]]
- .graph create text 2 2 -anchor nw -font fixed -text "$bps"
- }
- }
-
- # Draw the receive line
- set x $w2
- set scaled {}
- foreach thing $incoords {
- lappend scaled $x [expr double($h) - 2 - (double($hh) * double($thing) / double($inmax))]
- incr x
- }
-
- if {[llength $scaled] >= 4} {
- eval ".graph create line $scaled -fill #00A000"
- set bits [expr 8.0 * ([lindex $GraphPoints(in) end] - [lindex $GraphPoints(in) 0])]
- set timediff [expr [lindex $GraphPoints(times) end] - [lindex $GraphPoints(times) 0]]
- if {$timediff != 0} {
- set bps [Pretty [expr double($bits) / $timediff]]
- .graph create text [expr $w2+2] 2 -anchor nw -font fixed -text "$bps"
- }
- }
-}
-
-proc Pretty { n } {
- if {$n < 0} {
- return "***"
- }
- if {$n < 1000} {
- return [format "%.1f" $n]
- }
- set n [expr $n/1000.0]
- if {$n < 1000} {
- return [format "%.1fk" $n]
- }
- set n [expr $n/1000.0]
- if {$n < 1000} {
- return [format "%.1fM" $n]
- }
- set n [expr $n/1000.0]
- return [format "%.1fG" $n]
-}
-
-#***********************************************************************
-# %PROCEDURE: Help
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Opens help page
-#***********************************************************************
-proc Help {} {
- if {![file readable /usr/share/rp-pppoe-gui/tkpppoe.html]} {
- tk_dialog .err Error "Help file '/usr/share/rp-pppoe-gui/tkpppoe.html' is not installed" error 0 OK
- return
- }
- catch { exec /bin/sh -c "netscape -remote 'openURL(/usr/share/rp-pppoe-gui/tkpppoe.html)' || netscape /usr/share/rp-pppoe-gui/tkpppoe.html" > /dev/null 2>/dev/null & }
-}
-
-
-
-#***********************************************************************
-# %PROCEDURE: doLogo
-# %ARGUMENTS:
-# None
-# %RETURNS:
-# Nothing
-# %DESCRIPTION:
-# Does the logo thing
-#***********************************************************************
-proc doLogo {} {
- global AlreadyRunFile ConfigDir
- if {[file exists $AlreadyRunFile]} {
- return
- }
- catch { file mkdir $ConfigDir }
- catch { close [open $AlreadyRunFile "w"] }
- canvas .c -width 374 -height 286 -bg #FFFFCC
- pack .c
- drawLogo .c #FFFFCC
-
- # Funky effect
- .c create text 4 4 -anchor nw -text "Welcome to RP-PPPoE" \
- -fill red -font {-family times -size -24 -weight bold} -tags pppoe
- .c lower pppoe
-
- .c move logo -300 0
-
- update idletasks
-
- for {set i 0} {$i < 15} {incr i} {
- .c move logo 20 0
- update idletasks
- after 25
- }
-
- .c create text 4 28 -anchor nw -text "http://www.roaringpenguin.com" \
- -fill red -font {-family courier -size -14 -weight bold}
- update idletasks
- after 2500
-}
-
-doLogo
-catch { destroy .c }
-
-# Try creating an empty config file if none exists
-if {![file readable $ConnectionInfoFile]} {
- catch { file mkdir $ConfigDir }
- catch {
- set fp [open $ConnectionInfoFile "w"]
- close $fp
- }
-}
-
-CreateMainDialog
diff --git a/mdk-stage1/rp-pppoe/gui/wrapper.c b/mdk-stage1/rp-pppoe/gui/wrapper.c
deleted file mode 100644
index e2b99662a..000000000
--- a/mdk-stage1/rp-pppoe/gui/wrapper.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/* -*-Mode: C;-*- */
-
-/***********************************************************************
-*
-* wrapper.c
-*
-* C wrapper designed to run SUID root for controlling PPPoE connections.
-*
-* Copyright (C) 2001 by Roaring Penguin Software Inc.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#define _SVID_SOURCE 1 /* For putenv */
-#define _POSIX_SOURCE 1 /* For fileno */
-#define _BSD_SOURCE 1 /* For setreuid */
-#include <stdlib.h>
-#include <string.h>
-#include <stdio.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-#define CONN_NAME_LEN 64
-#define LINELEN 512
-
-static char const *adsl_start = ADSL_START_PATH;
-static char const *adsl_stop = ADSL_STOP_PATH;
-static char const *adsl_status = ADSL_STATUS_PATH;
-
-/**********************************************************************
- *%FUNCTION: PathOK
- *%ARGUMENTS:
- * fname -- a file name.
- *%RETURNS:
- * 1 if path to fname is secure; 0 otherwise.
- *%DESCRIPTION:
- * Makes sure ownership/permissions of file and parent directories
- * are safe.
- **********************************************************************/
-static int
-PathOK(char const *fname)
-{
- char path[LINELEN];
- struct stat buf;
- char const *slash;
-
- if (strlen(fname) > LINELEN) {
- fprintf(stderr, "Pathname '%s' too long\n", fname);
- return 0;
- }
-
- /* Must be absolute path */
- if (*fname != '/') {
- fprintf(stderr, "Unsafe path '%s' not absolute\n", fname);
- return 0;
- }
-
- /* Check root directory */
- if (stat("/", &buf) < 0) {
- perror("stat");
- return 0;
- }
- if (buf.st_uid) {
- fprintf(stderr, "SECURITY ALERT: Root directory (/) not owned by root\n");
- return 0;
- }
- if (buf.st_mode & (S_IWGRP | S_IWOTH)) {
- fprintf(stderr, "SECURITY ALERT: Root directory (/) writable by group or other\n");
- return 0;
- }
-
- /* Check each component */
- slash = fname;
-
- while(*slash) {
- slash = strchr(slash+1, '/');
- if (!slash) {
- slash = fname + strlen(fname);
- }
- memcpy(path, fname, slash-fname);
- path[slash-fname] = 0;
- if (stat(path, &buf) < 0) {
- perror("stat");
- return 0;
- }
- if (buf.st_uid) {
- fprintf(stderr, "SECURITY ALERT: '%s' not owned by root\n", path);
- return 0;
- }
-
- if (buf.st_mode & (S_IWGRP | S_IWOTH)) {
- fprintf(stderr, "SECURITY ALERT: '%s' writable by group or other\n",
- path);
- return 0;
- }
- }
- return 1;
-}
-
-/**********************************************************************
- *%FUNCTION: CleanEnvironment
- *%ARGUMENTS:
- * envp -- environment passed to main
- *%RETURNS:
- * Nothing
- *%DESCRIPTION:
- * Deletes all environment variables; makes safe environment
- **********************************************************************/
-static void
-CleanEnvironment(char *envp[])
-{
- envp[0] = NULL;
- putenv("PATH=/bin:/usr/bin:/sbin:/usr/sbin");
-}
-
-/**********************************************************************
- *%FUNCTION: main
- *%ARGUMENTS:
- * argc, argv -- usual suspects
- * Usage: pppoe-wrapper {start|stop|status} {connection_name}
- *%RETURNS:
- * Whatever adsl-start, adsl-stop or adsl-status returns.
- *%DESCRIPTION:
- * Runs adsl-start, adsl-stop or adsl-status on given connection if
- * non-root users are allowed to do it.
- **********************************************************************/
-int
-main(int argc, char *argv[])
-{
- int amRoot;
- char *cp;
- char fname[64+CONN_NAME_LEN];
- char line[LINELEN+1];
- int allowed = 0;
-
- FILE *fp;
-
- extern char **environ;
-
- /* Clean out environment */
- CleanEnvironment(environ);
-
- /* Are we root? */
- amRoot = (getuid() == 0);
-
- /* Validate arguments */
- if (argc != 3) {
- fprintf(stderr, "Usage: %s {start|stop|status} connection_name\n",
- argv[0]);
- exit(1);
- }
-
- if (strcmp(argv[1], "start") &&
- strcmp(argv[1], "stop") &&
- strcmp(argv[1], "status")) {
- fprintf(stderr, "Usage: %s {start|stop|status} connection_name\n",
- argv[0]);
- exit(1);
- }
-
- /* Connection name can be at most CONN_NAME_LEN chars; alpha, num, underscore */
- if (strlen(argv[2]) > CONN_NAME_LEN) {
- fprintf(stderr, "%s: Connection name '%s' too long.\n",
- argv[0], argv[2]);
- exit(1);
- }
-
- for (cp = argv[2]; *cp; cp++) {
- if (!strchr("abcdefghijklmnopqrstuvwxyz"
- "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
- "0123456789_-", *cp)) {
- fprintf(stderr, "%s: Connection name '%s' contains illegal character '%c'\n", argv[0], argv[2], *cp);
- exit(1);
- }
- }
-
- /* Open the connection file */
- sprintf(fname, "/etc/ppp/rp-pppoe-gui/conf.%s", argv[2]);
- /* Check path sanity */
- if (!PathOK(fname)) {
- exit(1);
- }
-
- fp = fopen(fname, "r");
- if (!fp) {
- fprintf(stderr, "%s: Could not open '%s': %s\n",
- argv[0], fname, strerror(errno));
- exit(1);
- }
-
- /* Check if non-root users can control it */
- if (amRoot) {
- allowed = 1;
- } else {
- while (!feof(fp)) {
- if (!fgets(line, LINELEN, fp)) {
- break;
- }
- if (!strcmp(line, "NONROOT=OK\n")) {
- allowed = 1;
- break;
- }
- }
- }
- fclose(fp);
-
- if (!allowed) {
- fprintf(stderr, "%s: Non-root users are not permitted to control connection '%s'\n", argv[0], argv[2]);
- exit(1);
- }
-
- /* Become root with setuid() to defeat is-root checks in shell scripts */
- if (setreuid(0, 0) < 0) {
- perror("setreuid");
- exit(1);
- }
-
- /* It's OK -- do it. */
- if (!strcmp(argv[1], "start")) {
- if (!PathOK(adsl_start)) exit(1);
- execl(adsl_start, "adsl-start", fname, NULL);
- } else if (!strcmp(argv[1], "stop")) {
- if (!PathOK(adsl_stop)) exit(1);
- execl(adsl_stop, "adsl-stop", fname, NULL);
- } else {
- if (!PathOK(adsl_status)) exit(1);
- execl(adsl_status, "adsl-status", fname, NULL);
- }
- fprintf(stderr, "%s: execl: %s\n", argv[0], strerror(errno));
- exit(1);
-}
diff --git a/mdk-stage1/rp-pppoe/man/adsl-connect.8 b/mdk-stage1/rp-pppoe/man/adsl-connect.8
deleted file mode 100644
index 1b34a74e5..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-connect.8
+++ /dev/null
@@ -1,66 +0,0 @@
-.\" $Id$
-.TH ADSL-CONNECT 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-connect \- Shell script to manage a PPPoE link
-
-.SH SYNOPSIS
-.B adsl-connect \fR[\fIconfig_file\fR]
-.P
-.B adsl-connect \fR\fIinterface user\fR [\fIconfig_file\fR]
-
-
-.SH DESCRIPTION
-\fBadsl-connect\fR is a shell script which manages an ADSL connection
-using the Roaring Penguin user-space PPPoE client. If you omit
-\fIconfig_file\fR, the default file \fB/etc/ppp/pppoe.conf\fR is used.
-If you supply \fIinterface\fR and \fIuser\fR, then they override the
-Ethernet interface and user-name settings in the configuration file.
-.P
-Note that normally, you should \fInot\fR invoke \fBadsl-connect\fR
-directly. Instead, use \fBadsl-start\fR to bring up the ADSL connection.
-.P
-\fBadsl-connect\fR first reads a configuration file. It then brings
-up a PPPoE connection. If the connection ever drops, a message is logged
-to syslog, and \fBadsl-connect\fR re-establishes the connection. In addition,
-each time the connection is dropped or cannot be established,
-\fBadsl-connect\fR executes the script \fB/etc/ppp/adsl-lost\fR if it
-exists and is executable.
-
-.P
-The shell script \fBadsl-stop\fR causes \fBadsl-connect\fR to break out
-of its loop, bring the connection down, and exit.
-
-.SH TECHNICAL DETAILS
-\fBadsl-connect\fR uses the following shell variables from the
-configuration file:
-
-.TP
-.B ETH
-The Ethernet interface connected to the ADSL modem (for example, eth0).
-
-.TP
-.B USER
-The ADSL user-id (for example, b1xxnxnx@sympatico.ca).
-
-.TP
-.B PIDFILE
-A file in which to write the process-ID of the adsl-connect process
-(for example, \fB/var/run/pppoe.pid\fR). Two additional files
-($PIDFILE.pppd and $PIDFILE.pppoe) hold the process-ID's of the
-\fBpppd\fR and \fBpppoe\fR processes, respectively.
-
-.P
-By using different configuration files with different PIDFILE
-settings, you can manage multiple PPPoE connections. Just specify the
-configuration file as an argument to \fBadsl-start\fR and
-\fBadsl-stop\fR.
-
-.SH AUTHOR
-\fBadsl-connect\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-stop(8), pppd(8), pppoe.conf(5), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-server(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-setup.8 b/mdk-stage1/rp-pppoe/man/adsl-setup.8
deleted file mode 100644
index 9e78fa547..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-setup.8
+++ /dev/null
@@ -1,23 +0,0 @@
-.\" $Id$
-.TH ADSL-SETUP 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-setup \- Shell script to configure Roaring Penguin PPPoE client
-.SH SYNOPSIS
-.B adsl-setup
-
-.SH DESCRIPTION
-\fBadsl-setup\fR is a shell script which prompts you for various pieces
-of information and sets up an /etc/ppp/pppoe.conf configuration script
-for the \fBadsl-start\fR, \fBadsl-stop\fR and \fBadsl-connect\fR scripts.
-
-.SH AUTHOR
-\fBadsl-setup\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8),
-pppoe.conf(5), adsl-status(8), pppoe-sniff(8), pppoe-relay(8),
-pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-start.8 b/mdk-stage1/rp-pppoe/man/adsl-start.8
deleted file mode 100644
index 87250b381..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-start.8
+++ /dev/null
@@ -1,27 +0,0 @@
-.\" $Id$
-.TH ADSL-START 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-start \- Shell script to bring up a PPPoE link
-.SH SYNOPSIS
-.B adsl-start \fR[\fIconfig_file\fR]
-.P
-.B adsl-start \fR\fIinterface user\fR [\fIconfig_file\fR]
-
-.SH DESCRIPTION
-\fBadsl-start\fR is a shell script which starts the Roaring Penguin
-user-space PPPoE client. If you omit \fIconfig_file\fR, the default
-file \fB/etc/ppp/pppoe.conf\fR is used. If you supply
-\fIinterface\fR and \fIuser\fR, then they override the Ethernet interface
-and user-name settings in the configuration file.
-
-.SH AUTHOR
-\fBadsl-start\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8),
-pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-status.8 b/mdk-stage1/rp-pppoe/man/adsl-status.8
deleted file mode 100644
index 2114d461e..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-status.8
+++ /dev/null
@@ -1,25 +0,0 @@
-.\" $Id$
-.TH ADSL-STATUS 8 "16 March 2000"
-.UC 4
-.SH NAME
-adsl-status \- Shell script to report on status of PPPoE link
-.SH SYNOPSIS
-.B adsl-status \fR[\fIconfig_file\fR]
-
-.SH DESCRIPTION
-\fBadsl-status\fR is a shell script which checks the status of the
-PPPoE link established by the Roaring Penguin user-space PPPoE client.
-If you omit \fIconfig_file\fR, the default file
-\fB/etc/ppp/pppoe.conf\fR is used.
-
-.SH AUTHOR
-\fBadsl-status\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-adsl-setup(8), adsl-stop(8), pppoe-sniff(8), pppoe-relay(8),
-pppoe-server(8)
-
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-stop.8 b/mdk-stage1/rp-pppoe/man/adsl-stop.8
deleted file mode 100644
index 2ac7fef8e..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-stop.8
+++ /dev/null
@@ -1,21 +0,0 @@
-.\" $Id$
-.TH ADSL-STOP 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-stop \- Shell script to shut down a PPPoE link
-.SH SYNOPSIS
-.B adsl-stop \fR[\fIconfig_file\fR]
-
-.SH DESCRIPTION
-\fBadsl-stop\fR is a shell script which stops the Roaring Penguin
-user-space PPPoE client. If you omit \fIconfig_file\fR, the default
-file \fB/etc/ppp/pppoe.conf\fR is used.
-
-.SH AUTHOR
-\fBadsl-stop\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-connect(8), pppd(8), pppoe.conf(5), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8), pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe-relay.8 b/mdk-stage1/rp-pppoe/man/pppoe-relay.8
deleted file mode 100644
index 5f79b09a1..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe-relay.8
+++ /dev/null
@@ -1,124 +0,0 @@
-.\" $Id$
-.TH PPPOE-RELAY 8 "26 January 2001"
-.\""
-.UC 4
-.SH NAME
-pppoe-relay \- user-space PPPoE relay agent.
-.SH SYNOPSIS
-.B pppoe-relay \fR[\fIoptions\fR]
-
-.SH DESCRIPTION
-\fBpppoe-relay\fR is a user-space relay agent for PPPoE
-(Point-to-Point Protocol over Ethernet) for Linux. \fBpppoe-relay\fR
-works in concert with the \fBpppoe\fR client and \fBpppoe-server\fR
-server. See the OPERATION section later in this manual for
-details on how \fBpppoe-relay\fR works.
-
-.SH OPTIONS
-.TP
-.B \-S \fIinterface\fR
-Adds the Ethernet interface \fIinterface\fR to the list of interfaces
-managed by \fBpppoe-relay\fR. Only PPPoE servers may be connected to
-this interface.
-
-.TP
-.B \-C \fIinterface\fR
-Adds the Ethernet interface \fIinterface\fR to the list of interfaces
-managed by \fBpppoe-relay\fR. Only PPPoE clients may be connected to
-this interface.
-
-.TP
-.B \-B \fIinterface\fR
-Adds the Ethernet interface \fIinterface\fR to the list of interfaces
-managed by \fBpppoe-relay\fR. Both PPPoE clients and servers may be
-connected to this interface.
-
-.TP
-.B \-n \fInum\fR
-Allows at most \fInum\fR concurrent PPPoE sessions. If not specified,
-the default is 5000. \fInum\fR can range from 1 to 65534.
-
-.TP
-.B \-i \fItimeout\fR
-Specifies the session idle timeout. If both peers in a session are idle
-for more than \fItimeout\fR seconds, the session is terminated.
-If \fItimeout\fR is specified as zero, sessions will never be terminated
-because of idleness.
-
-Note that the idle-session expiry routine is never run more frequently than
-every 30 seconds, so the timeout is approximate. The default value for
-\fItimeout\fR is 600 seconds (10 minutes.)
-
-.TP
-.B \-F
-The \fB\-F\fR option causes \fBpppoe-relay\fR \fInot\fR to fork into the
-background; instead, it remains in the foreground.
-
-.TP
-.B \-h
-The \fB\-h\fR option prints a brief usage message and exits.
-
-.SH OPERATION
-
-\fBpppoe-relay\fR listens for incoming PPPoE PADI frames on all interfaces
-specified with \fB-B\fR or \fB-C\fR options. When a PADI frame appears,
-\fBpppoe-relay\fR adds a Relay-Session-ID tag and broadcasts the PADI
-on all interfaces specified with \fB-B\fR or \fB-S\fR options (except the
-interface on which the frame arrived.)
-
-Any PADO frames received are relayed back to the client which sent the
-PADI (assuming they contain valid Relay-Session-ID tags.) Likewise,
-PADR frames from clients are relayed back to the matching access
-concentrator.
-
-When a PADS frame is received, \fBpppoe-relay\fR enters the two peers'
-MAC addresses and session-ID's into a hash table. (The session-ID seen
-by the access concentrator may be different from that seen by the client;
-\fBpppoe-relay\fR must renumber sessions to avoid the possibility of duplicate
-session-ID's.) Whenever either peer sends a session frame, \fBpppoe-relay\fR
-looks up the session entry in the hash table and relays the frame to
-the correct peer.
-
-When a PADT frame is received, \fBpppoe-relay\fR relays it to the peer
-and deletes the session entry from its hash table.
-
-If a client and server crash (or frames are lost), PADT frames may never
-be sent, and \fBpppoe-relay\fR's hash table can fill up with stale sessions.
-Therefore, a session-cleaning routine runs periodically, and removes old
-sessions from the hash table. A session is considered "old" if no traffic
-has been seen within \fItimeout\fR seconds. When a session is deleted because
-of a timeout, a PADT frame is sent to each peer to make certain that they
-are aware the session has been killed.
-
-.SH EXAMPLE INVOCATIONS
-
-.nf
-pppoe-relay -C eth0 -S eth1
-.fi
-
-The example above relays frames between PPPoE clients on the eth0 network
-and PPPoE servers on the eth1 network.
-
-.nf
-pppoe-relay -B eth0 -B eth1
-.fi
-
-This example is a transparent relay -- frames are relayed between any mix
-of clients and servers on the eth0 and eth1 networks.
-
-.nf
-pppoe-relay -S eth0 -C eth1 -C eth2 -C eth3
-.fi
-
-This example relays frames between servers on the eth0 network and
-clients on the eth1, eth2 and eth3 networks.
-
-.SH AUTHORS
-\fBpppoe-relay\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-pppoe(8), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe-server.8 b/mdk-stage1/rp-pppoe/man/pppoe-server.8
deleted file mode 100644
index aacf11f1f..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe-server.8
+++ /dev/null
@@ -1,123 +0,0 @@
-.\" $Id$
-.TH PPPOE-SERVER 8 "3 July 2000"
-.\""
-.UC 4
-.SH NAME
-pppoe-server \- user-space PPPoE server
-.SH SYNOPSIS
-.B pppoe-server \fR[\fIoptions\fR]
-
-.SH DESCRIPTION
-\fBpppoe-server\fR is a user-space server for PPPoE (Point-to-Point Protocol
-over Ethernet) for Linux and other UNIX systems. \fBpppoe-server\fR works in
-concert with the \fBpppoe\fR client to respond to PPPoE discovery packets
-and set up PPPoE sessions.
-
-.SH OPTIONS
-.TP
-.B \-F
-The \fB\-F\fR option causes \fBpppoe-server\fR not to fork and become a
-daemon. The default is to fork and become a daemon.
-
-.TP
-.B \-I \fIinterface\fR
-The \fB\-I\fR option specifies the Ethernet interface to use. Under Linux,
-it is typically \fIeth0\fR or \fIeth1\fR. The interface should be "up"
-before you start \fBpppoe-server\fR, but should \fInot\fR be configured to have
-an IP address.
-
-.TP
-.B \-T \fItimeout\fR
-This option is passed directly to \fBpppoe\fR; see \fBpppoe\fR(8) for
-details.
-
-.TP
-.B \-C \fIac_name\fR
-Specifies which name to report as the access concentrator name. If not
-supplied, the host name is used.
-
-.TP
-.B \-m \fIMSS\fR
-This option is passed directly to \fBpppoe\fR; see \fBpppoe\fR(8) for
-details.
-
-.TP
-.B \-s
-This option is passed directly to \fBpppoe\fR; see \fBpppoe\fR(8) for
-details. In addition, it causes \fBpppd\fR to be invoked with the
-\fIsync\fR option.
-
-.TP
-.B \-L \fIip\fR
-Sets the local IP address. This is passed to spawned \fBpppd\fR processes.
-If not specified, the default is 10.0.0.1.
-
-.TP
-.B \-R \fIip\fR
-Sets the starting remote IP address. As sessions are established,
-IP addresses are assigned starting from \fIip\fR. \fBpppoe-server\fR
-automatically keeps track of the pool of addresses and passes a
-valid remote IP address to \fBpppd\fR. If not specified, a starting address
-of 10.67.15.1 is used.
-
-.TP
-.B \-N \fInum\fR
-Allows at most \fInum\fR concurrent PPPoE sessions. If not specified,
-the default is 64.
-
-.TP
-.B \-p \fIfname\fR
-Reads the specified file \fIfname\fR which is a text file consisting of
-one IP address per line. These IP addresses will be assigned to clients.
-The number of sessions allowed will equal the number of addresses found
-in the file. The \fB\-p\fR option overrides both \fB\-R\fR and \fB\-N\fR.
-
-.TP
-.B \-o \fIoffset\fR
-Instead of numbering PPPoE sessions starting at 1, they will be numbered
-starting at \fIoffset\fR+1. This allows you to run multiple servers on
-a given machine; just make sure that their session numbers do not
-overlap.
-
-.TP
-.B \-f disc:sess
-The \fB\-f\fR option sets the Ethernet frame types for PPPoE discovery
-and session frames. The types are specified as hexadecimal numbers
-separated by a colon. Standard PPPoE uses frame types 8863:8864.
-\fIYou should not use this option\fR unless you are absolutely sure
-the peer you are dealing with uses non-standard frame types.
-
-.TP
-.B \-h
-The \fB\-h\fR option prints a brief usage message and exits.
-
-.SH OPERATION
-
-\fBpppoe-server\fR listens for incoming PPPoE discovery packets. When
-a session is established, it spawns a \fBpppd\fR process. The following
-options are passed to \fBpppd\fR:
-
-.nf
-nodetach noaccomp nobsdcom nodeflate nopcomp novj novjccomp
-default-asyncmap
-.fi
-
-In addition, the local and remote IP address are set based on the
-\fB\-L\fR and \fB\-R\fR options. The \fBpty\fR option is supplied along
-with a \fBpppoe\fR command to initiate the PPPoE session. Finally,
-additional \fBpppd\fR options can be placed in the file
-\fB/etc/ppp/pppoe-server-options\fR (which must exist, even if it is just
-empty!)
-
-Note that \fBpppoe-server\fR is meant mainly for testing PPPoE clients.
-It is \fInot\fR a high-performance server meant for production use.
-
-.SH AUTHORS
-\fBpppoe-server\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-pppoe(8), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe-sniff.8 b/mdk-stage1/rp-pppoe/man/pppoe-sniff.8
deleted file mode 100644
index 431830a22..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe-sniff.8
+++ /dev/null
@@ -1,77 +0,0 @@
-.\" $Id$
-.TH PPPOE-SNIFF 8 "3 July 2000"
-.\""
-.UC 4
-.SH NAME
-pppoe-sniff \- examine network for non-standard PPPoE frames
-.SH SYNOPSIS
-.B pppoe-sniff \fR[\fIoptions\fR]
-
-.SH DESCRIPTION
-\fBpppoe-sniff\fR listens for likely-looking PPPoE PADR and session frames
-and deduces extra options required for \fBpppoe(8)\fR to work.
-
-Some DSL providers seem to use non-standard frame types for PPPoE frames,
-and/or require a certain value in the Service-Name field. It is often
-easier to sniff those values from a machine which can successfully connect
-rather than try to pry them out of the DSL provider.
-
-To use \fBpppoe-sniff\fR, you need two computers, a DSL modem and
-an Ethernet hub (\fInot\fR an Ethernet switch.)
-
-If the DSL modem normally connects directly to your computer's
-Ethernet card, connect it to the "uplink" port on the Ethernet hub.
-Plug two computers into normal ports on the hub. On one computer, run
-whatever software the DSL provider gave you on whatever operating
-system the DSL provider supports. On the other computer, run Linux and
-log in as root.
-
-On the Linux machine, put the Ethernet interface into promiscuous mode
-and start \fBpppoe-sniff\fR. If the ethernet interface is \fIeth0\fR,
-for example, type these commands:
-
-.nf
- ifconfig eth0 promisc
- pppoe-sniff -I eth0
-.fi
-
-On the other machine, start your DSL connection as usual. After a short
-time, \fBpppoe-sniff\fR should print recommendations for the value
-of \fBPPPOE_EXTRA\fR. Set this value in \fB/etc/ppp/pppoe.conf\fR.
-If \fBpppoe-sniff\fR indicates that something special is required in
-\fBPPPOE_EXTRA\fR, please e-mail this to \fBpppoe@roaringpenguin.com\fR
-along with the name of your ISP and the manufacturer and model number of
-your DSL modem. This information will be collated and provided on the
-PPPoE web page for users who do not have two computers.
-
-After \fBpppoe-sniff\fR finishes (or you stop it if it seems hung),
-remember to turn off promiscuous mode:
-
-.nf
- ifconfig eth0 -promisc
-.fi
-
-.SH OPTIONS
-.TP
-.B \-I \fIinterface\fR
-The \fB\-I\fR option specifies the Ethernet interface to use. Under Linux,
-it is typically \fIeth0\fR or \fIeth1\fR. The interface should be "up"
-and in promiscuous mode before you start \fBpppoe-sniff\fR.
-
-.TP
-.B \-V
-The \fB\-V\fR option causes \fBpppoe-sniff\fR to print its version number and
-exit.
-
-.SH BUGS
-\fBpppoe-sniff\fR only works on Linux.
-
-.SH AUTHORS
-\fBpppoe-sniff\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-pppoe(8), adsl-setup(8), adsl-status(8), pppoe-server(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe.8 b/mdk-stage1/rp-pppoe/man/pppoe.8
deleted file mode 100644
index 999c3d2ed..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe.8
+++ /dev/null
@@ -1,236 +0,0 @@
-.\" $Id$
-.TH PPPOE 8 "3 July 2000"
-.UC 4
-.SH NAME
-pppoe \- user-space PPPoE client.
-.SH SYNOPSIS
-.B pppd pty 'pppoe \fR[\fIpppoe_options\fR]\fB' \fR[\fIpppd_options\fR]
-.P
-.B pppoe -A \fR[\fIpppoe_options\fR]
-.SH DESCRIPTION
-\fBpppoe\fR is a user-space client for PPPoE (Point-to-Point Protocol
-over Ethernet) for Linux and other UNIX systems. \fBpppoe\fR works in
-concert with the \fBpppd\fR PPP daemon to provide a PPP connection
-over Ethernet, as is used by many ADSL service providers.
-
-.SH OPTIONS
-.TP
-.B \-I \fIinterface\fR
-The \fB\-I\fR option specifies the Ethernet interface to use. Under Linux,
-it is typically \fIeth0\fR or \fIeth1\fR. The interface should be "up"
-before you start \fBpppoe\fR, but should \fInot\fR be configured to have
-an IP address.
-
-.TP
-.B \-T \fItimeout\fR
-The \fB\-T\fR option causes \fBpppoe\fR to exit if no session traffic
-is detected for \fItimeout\fR seconds. I recommend that you use this
-option as an extra safety measure, but if you do, you should make sure
-that PPP generates enough traffic so the timeout will normally not be
-triggered. The best way to do this is to use the
-\fIlcp-echo-interval\fR option to \fBpppd\fR. You should set the
-PPPoE timeout to be about four times the LCP echo interval.
-
-.TP
-.B \-D \fIfile_name\fR
-The \fB\-D\fR option causes every packet to be dumped to the specified
-\fIfile_name\fR. This is intended for debugging only; it produces huge
-amounts of output and greatly reduces performance.
-
-.TP
-.B \-V
-The \fB\-V\fR option causes \fBpppoe\fR to print its version number and
-exit.
-
-.TP
-.B \-A
-The \fB\-A\fR option causes \fBpppoe\fR to send a PADI packet and then print
-the names of access concentrators in each PADO packet it receives. Do not
-use this option in conjunction with \fBpppd\fR; the \fB\-A\fR option is
-meant to be used interactively to give interesting information about the
-access concentrator.
-
-.TP
-.B \-S \fIservice_name\fR
-Specifies the desired service name. \fBpppoe\fR will only initiate sessions
-with access concentrators which can provide the specified service. In
-most cases, you should \fInot\fR specify this option. Use it only if you
-know that there are multiple access concentrators or know that you need a
-specific service name.
-
-.TP
-.B \-C \fIac_name\fR
-Specifies the desired access concentrator name. \fBpppoe\fR will only
-initiate sessions with the specified access concentrator. In
-most cases, you should \fInot\fR specify this option. Use it only if you
-know that there are multiple access concentrators. If both the
-\fB\-S\fR and \fB\-C\fR options are specified, they must \fIboth\fR match
-for \fBpppoe\fR to initiate a session.
-
-.TP
-.B \-U
-Causes \fBpppoe\fR to use the Host-Uniq tag in its discovery packets. This
-lets you run multiple \fBpppoe\fR daemons without having their discovery
-packets interfere with one another. You must supply this option to
-\fIall\fR \fBpppoe\fR daemons if you intend to run multiple daemons
-simultaneously.
-
-.TP
-.B \-s
-Causes \fBpppoe\fR to use \fIsynchronous\fR PPP encapsulation. If you
-use this option, then you \fImust\fR use the \fBsync\fR option with
-\fBpppd\fR. You are encouraged to use this option if it works, because
-it greatly reduces the CPU overhead of \fBpppoe\fR. However, it
-MAY be unreliable on slow machines -- there is a race condition between
-pppd writing data and pppoe reading it. For this reason, the default
-setting is asynchronous. If you encounter bugs or crashes with Synchronous
-PPP, turn it off -- don't e-mail me for support!
-
-.TP
-.B \-m \fIMSS\fR
-Causes \fBpppoe\fR to \fIclamp\fR the TCP maximum segment size at the specified
-value. Because of PPPoE overhead, the maximum segment size for PPPoE is
-smaller than for normal Ethernet encapsulation. This could cause problems
-for machines on a LAN behind a gateway using PPPoE. If you have a LAN
-behind a gateway, and the gateway connects to the Internet using PPPoE,
-you are strongly recommended to use a \fB\-m 1412\fR option. This avoids
-having to set the MTU on all the hosts on the LAN.
-
-.TP
-.B \-p \fIfile\fR
-Causes \fBpppoe\fR to write its process-ID to the specified file. This
-can be used to locate and kill \fBpppoe\fR processes.
-
-.TP
-.B \-e \fIsess:mac\fR
-Causes \fBpppoe\fR to skip the discovery phase and move directly to the
-session phase. The session is given by \fIsess\fR and the MAC address of
-the peer by \fImac\fR. This mode is \fInot\fR meant for normal use; it
-is designed only for \fBpppoe-server\fR(8).
-
-.TP
-.B \-n
-Causes \fBpppoe\fR not to open a discovery socket. This mode is
-\fInot\fR meant for normal use; it is designed only for
-\fBpppoe-server\fR(8).
-
-.TP
-.B \-k
-Causes \fBpppoe\fR to terminate an existing session by sending a PADT frame,
-and then exit. You must use the \fB\-e\fR option in conjunction with this
-option to specify the session to kill. This may be useful for killing
-sessions when a buggy peer does not realize the session has ended.
-
-.TP
-.B \-d
-Causes \fBpppoe\fR to perform discovery and then exit, after printing
-session information to standard output. The session information is printed
-in exactly the format expected by the \fB\-e\fR option. This option lets
-you initiate a PPPoE discovery, perform some other work, and then start
-the actual PPP session. \fIBe careful\fR; if you use this option in a loop,
-you can create many sessions, which may annoy your peer.
-
-.TP
-.B \-f disc:sess
-The \fB\-f\fR option sets the Ethernet frame types for PPPoE discovery
-and session frames. The types are specified as hexadecimal numbers
-separated by a colon. Standard PPPoE uses frame types 8863:8864.
-\fIYou should not use this option\fR unless you are absolutely sure
-the peer you are dealing with uses non-standard frame types. If your
-ISP uses non-standard frame types, complain!
-
-.TP
-.B \-h
-The \fB\-h\fR option causes \fBpppoe\fR to print usage information and
-exit.
-
-.SH PPPOE BACKGROUND
-
-PPPoE (Point-to-Point Protocol over Ethernet) is described in RFC 2516
-and is a protocol which allows the session abstraction to be maintained
-over bridged Ethernet networks.
-
-PPPoE works by encapsulating PPP frames in Ethernet frames. The protocol
-has two distinct stages: The \fIdiscovery\fR and the \fIsession\fR stage.
-
-In the discovery stage, the host broadcasts a special PADI (PPPoE
-Active Discovery Initiation) frame to discover any \fIaccess
-concentrators\fR. The access concentrators (typically, only one
-access concentrator) reply with PADO (PPPoE Active Discovery Offer)
-packets, announcing their presence and the services they offer. The
-host picks one of the access concentrators and transmits a PADR (PPPoE
-Active Discovery Request) packet, asking for a session. The access
-concentrator replies with a PADS (PPPoE Active Discovery
-Session-Confirmation) packet. The protocol then moves to the session stage.
-
-In the session stage, the host and access concentrator exchange PPP frames
-embedded in Ethernet frames. The normal Ethernet MTU is 1500 bytes, but
-the PPPoE overhead plus two bytes of overhead for the encapsulated PPP
-frame mean that the MTU of the PPP interface is at most 1492 bytes.
-This causes \fIall kinds of problems\fR if you are using a Linux machine
-as a firewall and interfaces behind the firewall have an MTU greater than
-1492. In fact, to be safe, I recommend setting the MTU of machines
-behind the firewall to 1412, to allow for worst-case TCP and IP options
-in their respective headers.
-
-Normally, PPP uses the Link Control Protocol (LCP) to shut down a PPP
-link. However, the PPPoE specification allows the link to be shut down
-with a special PADT (PPPoE Active Discovery Terminate) packet. This client
-recognizes this packet and will correctly terminate if a terminate request
-is received for the PPP session.
-
-.SH DESIGN GOALS
-
-My design goals for this PPPoE client were as follows, in descending order
-of importance:
-
-.TP
-.B o
-It must work.
-
-.TP
-.B o
-It must be a user-space program and not a kernel patch.
-
-.TP
-.B o
-The code must be easy to read and maintain.
-
-.TP
-.B o
-It must be fully compliant with RFC 2516, the proposed PPPoE standard.
-
-.TP
-.B o
-It must never hang up forever -- if the connection is broken, it must
-detect this and exit, allowing a wrapper script to restart the connection.
-
-.TP
-.B o
-It must be fairly efficient.
-
-.P
-I believe I have achieved all of these goals, but (of course) am open
-to suggestions, patches and ideas. See my home page,
-http://www.roaringpenguin.com, for contact information.
-
-.SH NOTES
-
-For best results, you must give \fBpppd\fR an mtu option of
-1492. I have observed problems with excessively-large frames
-unless I set this option. Also, if \fBpppoe\fR is running on a firewall
-machine, all machines behind the firewall should have MTU's of 1412.
-
-If you have problems, check your system logs. \fBpppoe\fR logs interesting
-things to syslog. You may have to turn on logging of \fIdebug\fR-level
-messages for complete diagnosis.
-
-.SH AUTHORS
-\fBpppoe\fR was written by David F. Skoll <dfs@roaringpenguin.com>,
-with much inspiration from an earlier version by Luke Stras.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-server(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe.conf.5 b/mdk-stage1/rp-pppoe/man/pppoe.conf.5
deleted file mode 100644
index 731fd98d4..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe.conf.5
+++ /dev/null
@@ -1,168 +0,0 @@
-.\" $Id$
-.\""
-.TH PPPOE.CONF 5 "21 February 2000"
-.UC 4
-.SH NAME
-pppoe.conf \- Configuration file used by \fBadsl-start\fR(8),
-\fBadsl-stop\fR(8), \fBadsl-status(8)\fR and \fBadsl-connect\fR(8).
-
-.SH DESCRIPTION
-\fB/etc/ppp/pppoe.conf\fR is a shell script which contains configuration
-information for Roaring Penguin's ADSL scripts. Note that \fBpppoe.conf\fR
-is used only by the various adsl-* shell scripts, not by \fBpppoe\fR
-itself.
-
-\fBpppoe.conf\fR consists of a sequence of shell variable assignments.
-The variables and their meanings are:
-
-.TP
-.B ETH
-The Ethernet interface connected to the ADSL modem (for example, eth0).
-
-.TP
-.B USER
-The ADSL user-id (for example, b1xxnxnx@sympatico.ca).
-
-.TP
-.B SERVICENAME
-If this is not blank, then it is passed with the \fB\-S\fR option to
-\fBpppoe\fR. It specifies a service name to ask for. Usually, you
-should leave it blank.
-
-.TP
-.B ACNAME
-If this is not blank, then it is passed with the \fB\-C\fR option to
-\fBpppoe\fR. It specifies the name of the access concentrator to connect
-to. Usually, you should leave it blank.
-
-.TP
-.B DEMAND
-If set to a number, the link is activated on demand and brought down
-after after \fBDEMAND\fR seconds. If set to \fBno\fR, the link is kept
-up all the time rather than being activated on demand.
-
-.TP
-.B DNSTYPE
-One of \fBNOCHANGE\fR, \fBSPECIFY\fR or \fBSERVER\fR. If
-set to NOCHANGE, \fBadsl-connect\fR will not adjust the DNS setup in
-any way. If set to SPECIFY, it will re-write /etc/resolv.conf with
-the values of DNS1 and DNS2. If set to \fBSERVER\fR, it will
-supply the \fIusepeerdns\fR option to \fBpppd\fR, and make a symlink
-from /etc/resolv.conf to /etc/ppp/resolv.conf.
-
-.TP
-.B DNS1, DNS2
-IP addresses of DNS servers if you use DNSTYPE=SPECIFY.
-
-.TP
-.B NONROOT
-If the line \fBNONROOT=OK\fR (exactly like that; no whitespace or comments)
-appears in the configuration file, then \fBpppoe-wrapper\fR will allow
-non-root users to bring the conneciton up or down. The wrapper is installed
-only if you installed the rp-pppoe-gui package.
-
-.TP
-.B USEPEERDNS
-If set to "yes", then \fBadsl-connect\fR will supply the \fIusepeerdns\fR
-option to \fBpppd\fR, which causes it to obtain DNS server addresses
-from the peer and create a new \fB/etc/resolv.conf\fR file. Otherwise,
-\fBadsl-connect\fR will not supply this option, and \fBpppd\fR will not
-modify \fB/etc/resolv.conf\fR.
-
-.TP
-.B CONNECT_POLL
-How often (in seconds) \fBadsl-start\fR should check to see if a new PPP
-interface has come up. If this is set to 0, the \fBadsl-start\fR simply
-initiates the PPP session, but does not wait to see if it comes up
-successfully.
-
-.TP
-.B CONNECT_TIMEOUT
-How long (in seconds) \fBadsl-start\fR should wait for a new PPP interface
-to come up before concluding that \fBadsl-connect\fR has failed and killing
-the session.
-
-.TP
-.B PING
-A character which is echoed every \fBCONNECT_POLL\fR seconds while
-\fBadsl-start\fR is waiting for the PPP interface to come up.
-
-.TP
-.B FORCEPING
-A character which is echoed every \fBCONNECT_POLL\fR seconds while
-\fBadsl-start\fR is waiting for the PPP interface to come up. Similar
-to \fBPING\fR, but the character is echoed even if \fBadsl-start\fR's
-standard output is not a tty.
-
-.TP
-.B PIDFILE
-A file in which to write the process-ID of the adsl-connect process
-(for example, \fB/var/run/pppoe.pid\fR). Two additional files
-($PIDFILE.pppd and $PIDFILE.pppoe) hold the process-ID's of the
-\fBpppd\fR and \fBpppoe\fR processes, respectively.
-
-.TP
-.B SYNCHRONOUS
-An indication of whether or not to use synchronous PPP (\fByes\fR or
-\fBno\fR). Synchronous PPP is safe on Linux machines with the n_hdlc
-line discipline. (If you have a file called "n_hdlc.o" in your
-modules directory, you have the line discipline.) It is \fInot
-recommended\fR on other machines or on Linux machines without the
-n_hdlc line discipline due to some known and unsolveable race
-conditions in a user-mode client.
-
-.TP
-.B CLAMPMSS
-The value at which to "clamp" the advertised MSS for TCP sessions. The
-default of 1412 should be fine.
-
-.TP
-.B LCP_INTERVAL
-How often (in seconds) \fBpppd\fR sends out LCP echo-request packets.
-
-.TP
-.B LCP_FAILURE
-How many unanswered LCP echo-requests must occur before \fBpppd\fR
-concludes the link is dead.
-
-.TP
-.B PPPOE_TIMEOUT
-If this many seconds elapse without any activity seen by \fBpppoe\fR,
-then \fBpppoe\fR exits.
-
-.TP
-.B FIREWALL
-One of NONE, STANDALONE or MASQUERADE. If NONE, then \fBadsl-connect\fR does
-not add any firewall rules. If STANDALONE, then it clears existing firewall
-rules and sets up basic rules for a standalone machine. If MASQUERADE, then
-it clears existing firewall rules and sets up basic rules for an Internet
-gateway. If you run services on your machine, these simple firewall scripts
-are inadequate; you'll have to make your own firewall rules and set FIREWALL
-to NONE.
-
-.TP
-.B PPPOE_EXTRA
-Any extra arguments to pass to \fBpppoe\fR
-
-.TP
-.B PPPD_EXTRA
-Any extra arguments to pass to \fBpppd\fR
-
-.TP
-.B LINUX_PLUGIN
-If non-blank, the full path of the Linux kernel-mode PPPoE plugin
-(typically \fB/etc/ppp/plugins/rp-pppoe.so\fR.) This forces
-\fBadsl-connect\fR to use kernel-mode PPPoE on Linux 2.4.x systems.
-This code is experimental and unsupported. Use of the plugin causes
-\fBadsl-connect\fR to ignore CLAMPMSS, PPPOE_EXTRA, SYNCHRONOUS and
-PPPOE_TIMEOUT.
-
-.P
-By using different configuration files with different PIDFILE
-settings, you can manage multiple PPPoE connections. Just specify the
-configuration file as an argument to \fBadsl-start\fR and \fBadsl-stop\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-connect(8), adsl-start(8), adsl-stop(8), pppd(8), adsl-setup(8),
-pppoe-wrapper(8)
-
diff --git a/mdk-stage1/rp-pppoe/rp-pppoe-gui.spec b/mdk-stage1/rp-pppoe/rp-pppoe-gui.spec
deleted file mode 100644
index 3222a602e..000000000
--- a/mdk-stage1/rp-pppoe/rp-pppoe-gui.spec
+++ /dev/null
@@ -1,98 +0,0 @@
-Summary: PPP Over Ethernet (xDSL support)
-Name: rp-pppoe-gui
-Version: 3.0
-%if %(%{expand:test %{_vendor} != mandrake ; echo $?})
-Release: 1mdk
-%else
-Release: 1
-%endif
-Copyright: GPL
-Group: System Environment/Daemons
-Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-3.0.tar.gz
-Url: http://www.roaringpenguin.com/pppoe/
-Packager: David F. Skoll <dfs@roaringpenguin.com>
-BuildRoot: /tmp/pppoe-build
-Vendor: Roaring Penguin Software Inc.
-Requires: ppp >= 2.3.7
-Requires: rp-pppoe >= 3.0
-
-%description
-This is a graphical wrapper around the rp-pppoe PPPoE client. PPPoE is
-a protocol used by many DSL Internet Service Providers.
-
-%prep
-umask 022
-mkdir -p $RPM_BUILD_ROOT
-cd $RPM_BUILD_ROOT
-rm -rf $RPM_BUILD_ROOT/rp-pppoe-%{version}
-zcat $RPM_SOURCE_DIR/rp-pppoe-%{version}.tar.gz | tar xvf -
-cd $RPM_BUILD_ROOT/rp-pppoe-%{version}/src
-./configure --mandir=%{_mandir}
-
-%build
-cd $RPM_BUILD_ROOT/rp-pppoe-%{version}/gui
-make
-
-%install
-cd $RPM_BUILD_ROOT/rp-pppoe-%{version}/gui
-make install RPM_INSTALL_ROOT=$RPM_BUILD_ROOT
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-# Install entry in KDE menu
-if test -n "$KDEDIR" ; then
- mkdir -p "$KDEDIR/share/applnk/Internet"
- cat <<EOF > "$KDEDIR/share/applnk/Internet/tkpppoe.kdelnk"
-# KDE Config File
-[KDE Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-
-# Install entry in GNOME menus
-GNOMEDIR=`gnome-config --datadir 2>/dev/null`
-if test -n "$GNOMEDIR" ; then
- mkdir -p "$GNOMEDIR/gnome/apps/Internet"
-cat <<EOF > "$GNOMEDIR/gnome/apps/Internet/tkpppoe.desktop"
-[Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-
-%postun
-# Remove KDE menu entry
-if test -n "$KDEDIR" ; then
- rm -f "$KDEDIR/share/applnk/Internet/tkpppoe.kdelnk"
-fi
-
-# Remove GNOME menu entry
-GNOMEDIR=`gnome-config --datadir 2>/dev/null`
-if test -n "$GNOMEDIR" ; then
- rm -f "$GNOMEDIR/gnome/apps/Internet/tkpppoe.desktop"
-fi
-
-%files
-%defattr(-,root,root)
-%dir /etc/ppp/rp-pppoe-gui
-/usr/sbin/pppoe-wrapper
-/usr/bin/tkpppoe
-%{_mandir}/man1/tkpppoe.1*
-%{_mandir}/man1/pppoe-wrapper.1*
-/usr/share/rp-pppoe-gui/tkpppoe.html
-/usr/share/rp-pppoe-gui/mainwin-busy.png
-/usr/share/rp-pppoe-gui/mainwin-nonroot.png
-/usr/share/rp-pppoe-gui/mainwin.png
-/usr/share/rp-pppoe-gui/props-advanced.png
-/usr/share/rp-pppoe-gui/props-basic.png
-/usr/share/rp-pppoe-gui/props-nic.png
-/usr/share/rp-pppoe-gui/props-options.png
diff --git a/mdk-stage1/rp-pppoe/rp-pppoe.spec b/mdk-stage1/rp-pppoe/rp-pppoe.spec
deleted file mode 100644
index 622e3bb80..000000000
--- a/mdk-stage1/rp-pppoe/rp-pppoe.spec
+++ /dev/null
@@ -1,71 +0,0 @@
-Summary: PPP Over Ethernet (xDSL support)
-Name: rp-pppoe
-Version: 3.0
-%if %(%{expand:test %{_vendor} != mandrake ; echo $?})
-Release: 1mdk
-%else
-Release: 1
-%endif
-Copyright: GPL
-Group: System Environment/Daemons
-Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-3.0.tar.gz
-Url: http://www.roaringpenguin.com/pppoe/
-Packager: David F. Skoll <dfs@roaringpenguin.com>
-BuildRoot: /tmp/pppoe-build
-Vendor: Roaring Penguin Software Inc.
-Requires: ppp >= 2.3.7
-
-%description
-PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by
-many ADSL Internet Service Providers. Roaring Penguin has a free
-client for Linux systems to connect to PPPoE service providers.
-
-The client is a user-mode program and does not require any kernel
-modifications. It is fully compliant with RFC 2516, the official PPPoE
-specification.
-
-%prep
-%setup
-cd src
-./configure --mandir=%{_mandir}
-
-%build
-cd src
-make
-
-%install
-cd src
-make install RPM_INSTALL_ROOT=$RPM_BUILD_ROOT
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-,root,root)
-%doc doc/CHANGES doc/HOW-TO-CONNECT doc/LICENSE doc/KERNEL-MODE-PPPOE README
-%config /etc/ppp/pppoe.conf
-%config /etc/ppp/pppoe-server-options
-%config /etc/ppp/firewall-masq
-%config /etc/ppp/firewall-standalone
-/etc/ppp/plugins/*
-/usr/sbin/pppoe
-/usr/sbin/pppoe-server
-/usr/sbin/pppoe-sniff
-/usr/sbin/pppoe-relay
-/usr/sbin/adsl-connect
-/usr/sbin/adsl-start
-/usr/sbin/adsl-stop
-/usr/sbin/adsl-setup
-/usr/sbin/adsl-status
-%{_mandir}/man5/pppoe.conf.5*
-%{_mandir}/man8/pppoe.8*
-%{_mandir}/man8/pppoe-server.8*
-%{_mandir}/man8/pppoe-relay.8*
-%{_mandir}/man8/pppoe-sniff.8*
-%{_mandir}/man8/adsl-connect.8*
-%{_mandir}/man8/adsl-start.8*
-%{_mandir}/man8/adsl-stop.8*
-%{_mandir}/man8/adsl-status.8*
-%{_mandir}/man8/adsl-setup.8*
-/etc/rc.d/init.d/adsl
-
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-connect.in b/mdk-stage1/rp-pppoe/scripts/adsl-connect.in
deleted file mode 100755
index 85dfb3d8d..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-connect.in
+++ /dev/null
@@ -1,278 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-connect
-#
-# Shell script to connect to an ADSL provider using PPPoE
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-connect [config_file]
-# adsl-connect interface user [config_file]
-# Second form overrides USER and ETH from config file.
-# If config_file is omitted, defaults to /etc//ppp/pppoe.conf
-#
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-localstatedir=/var
-
-# Paths to programs
-IFCONFIG=/sbin/ifconfig
-PPPD=@PPPD@
-SETSID=@SETSID@
-PPPOE=@sbindir@/pppoe
-LOGGER="/usr/bin/logger -t `basename $0`"
-
-# Must be root
-if test "`@ID@ -u`" != 0 ; then
- echo "$0: You must be root to run this script" >& 2
- exit 1
-fi
-
-if test "$SETSID" != "" -a ! -x "$SETSID"; then
- SETSID=""
-fi
-
-CONFIG=/etc//ppp/pppoe.conf
-USER=""
-ETH=""
-
-# Sort out command-line arguments
-case "$#" in
- 1)
- CONFIG="$1"
- ;;
- 3)
- CONFIG="$3"
- ;;
-esac
-
-if test ! -f "$CONFIG" -o ! -r "$CONFIG" ; then
- echo "$0: Cannot read configuration file '$CONFIG'" >& 2
- exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-
-# Check for command-line overriding of ETH and USER
-case "$#" in
- 2|3)
- ETH="$1"
- USER="$2"
- ;;
-esac
-
-# Check that config file is sane
-if test "$USER" = "" ; then
- echo "$0: Check '$CONFIG' -- no setting for USER" >& 2
- exit 1
-fi
-if test "$ETH" = "" ; then
- echo "$0: Check '$CONFIG' -- no setting for ETH" >& 2
- exit 1
-fi
-
-PPPD_PID=0
-
-# Catch common error
-if test "$DEBUG" = "1" ; then
- echo "*** If you want to use DEBUG, invoke adsl-start, not adsl-connect."
- exit 1
-fi
-
-if test "$DEBUG" != "" ; then
- if test "$LINUX_PLUGIN" != "" ; then
- echo "Cannot use DEBUG mode and LINUX_PLUGIN at the same time."
- echo "Kernel-mode PPPoE is experimental and unsupported."
- exit 1
- fi
- echo "* The following section identifies your Ethernet interface" >> $DEBUG
- echo "* and user name. Some ISP's need 'username'; others" >> $DEBUG
- echo "* need 'username@isp.com'. Try both" >> $DEBUG
- echo "ETH=$ETH; USER=$USER" >> $DEBUG
- echo "---------------------------------------------" >> $DEBUG
-fi
-
-# MTU of Ethernet card attached to modem MUST be 1500. This apparently
-# fails on some *BSD's, so we'll only do it under Linux
-
-if test `uname -s` = Linux ; then
- $IFCONFIG $ETH up mtu 1500
- # For 2.4 kernels. Will fail on 2.2.x, but who cares?
- modprobe ppp_generic > /dev/null 2>&1
- modprobe ppp_async > /dev/null 2>&1
- modprobe ppp_synctty > /dev/null 2>&1
- if test -n "$LINUX_PLUGIN" ; then
- modprobe pppox > /dev/null 2>&1
- modprobe pppoe > /dev/null 2>&1
- fi
-fi
-
-if test "$SYNCHRONOUS" = "yes" ; then
- PPPOE_SYNC=-s
- PPPD_SYNC=sync
- # Increase the chances of it working on Linux...
- if test `uname -s` = Linux ; then
- modprobe n_hdlc > /dev/null 2>&1
- fi
-else
- PPPOE_SYNC=""
- PPPD_SYNC=""
-fi
-
-if test -n "$ACNAME" ; then
- ACNAME="-C $ACNAME"
-fi
-
-if test -n "$SERVICENAME" ; then
- SERVICENAME="-S $SERVICENAME"
-fi
-
-if test "$CLAMPMSS" = "no" ; then
- CLAMPMSS=""
-else
- CLAMPMSS="-m $CLAMPMSS"
-fi
-
-# If DNSTYPE is SERVER, we must use "usepeerdns" option to pppd.
-if test "$DNSTYPE" = "SERVER" ; then
- USEPEERDNS=yes
-fi
-
-if test "$USEPEERDNS" = "yes" ; then
- USEPEERDNS="usepeerdns"
-else
- USEPEERDNS=""
-fi
-
-# Backward config file compatibility
-if test "$DEMAND" = "" ; then
- DEMAND=no
-fi
-
-if test "$DEMAND" = "no" ; then
- DEMAND=""
-else
- DEMAND="demand persist idle $DEMAND 10.112.112.112:10.112.112.113 ipcp-accept-remote ipcp-accept-local connect true noipdefault ktune"
-fi
-
-case "$FIREWALL" in
- STANDALONE)
- . /etc/ppp/firewall-standalone
- ;;
- MASQUERADE)
- . /etc/ppp/firewall-masq
- ;;
-esac
-
-# If we're using kernel-mode PPPoE on Linux...
-if test "$LINUX_PLUGIN" != "" ; then
- PLUGIN_OPTS="plugin $LINUX_PLUGIN $ETH"
- modprobe pppoe > /dev/null 2>&1
-fi
-
-# Standard PPP options we always use
-PPP_STD_OPTIONS="$PLUGIN_OPTS noipdefault noauth default-asyncmap defaultroute hide-password nodetach $USEPEERDNS local mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp user $USER lcp-echo-interval $LCP_INTERVAL lcp-echo-failure $LCP_FAILURE $PPPD_EXTRA"
-
-# Jigger DNS if required...
-if test "$DNSTYPE" = "SERVER" ; then
- # Sorry, dude...
- rm -f /etc/resolv.conf
- ln -s /etc/ppp/resolv.conf /etc/resolv.conf
-elif test "$DNSTYPE" = "SPECIFY" ; then
- # Sorry, dude...
- rm -f /etc/resolv.conf
- echo "nameserver $DNS1" > /etc/resolv.conf
- if test -n "$DNS2" ; then
- echo "nameserver $DNS2" >> /etc/resolv.conf
- fi
-fi
-
-# PPPoE invocation
-PPPOE_CMD="$PPPOE -p $PPPOE_PIDFILE -I $ETH -T $PPPOE_TIMEOUT -U $PPPOE_SYNC $CLAMPMSS $ACNAME $SERVICENAME $PPPOE_EXTRA"
-if test "$DEBUG" != "" ; then
- if test "$DEMAND" != "" ; then
- echo "(Turning off DEMAND for debugging purposes)"
- DEMAND=""
- fi
- echo "* The following section shows the pppd command we will invoke" >> $DEBUG
- echo "pppd invocation" >> $DEBUG
- echo "$SETSID $PPPD pty '$PPPOE_CMD' $PPP_STD_OPTIONS $PPPD_SYNC debug" >> $DEBUG
- echo "---------------------------------------------" >> $DEBUG
- $SETSID $PPPD pty "$PPPOE_CMD -D $DEBUG-0" \
- $PPP_STD_OPTIONS \
- $PPPD_SYNC \
- debug >> $DEBUG 2>&1
- echo "---------------------------------------------" >> $DEBUG
- echo "* The following section is an extract from your log." >> $DEBUG
- echo "* Look for error messages from pppd, such as" >> $DEBUG
- echo "* a lack of kernel support for PPP, authentication failure" >> $DEBUG
- echo "* etc." >> $DEBUG
- echo "Extract from /var/log/messages" >> $DEBUG
- grep 'ppp' /var/log/messages | tail -150 >> $DEBUG
- date >> $DEBUG
- echo "---------------------------------------------" >> $DEBUG
- echo "* The following section is a dump of the packets" >> $DEBUG
- echo "* sent and received by rp-pppoe. If you don't see" >> $DEBUG
- echo "* any output, it's an Ethernet driver problem. If you only" >> $DEBUG
- echo "* see three PADI packets and nothing else, check your cables" >> $DEBUG
- echo "* and modem. Make sure the modem lights flash when you try" >> $DEBUG
- echo "* to connect. Check that your Ethernet card is in" >> $DEBUG
- echo "* half-duplex, 10Mb/s mode. If all else fails," >> $DEBUG
- echo "* try using pppoe-sniff." >> $DEBUG
- echo "rp-pppoe debugging dump" >> $DEBUG
- cat $DEBUG-0 >> $DEBUG
- rm -f $DEBUG-0
- for i in 1 2 3 4 5 6 7 8 9 10 ; do
- echo ""
- echo ""
- echo ""
- done
- echo "*** Finished debugging run. Please review the file"
- echo "*** '$DEBUG' and try to"
- echo "*** figure out what is going on."
- echo "***"
- echo "*** Unfortunately, we can NO LONGER accept debugging"
- echo "*** output for analysis. Please do not send this to"
- echo "*** Roaring Penguin; it is too time-consuming for"
- echo "*** us to deal with all the analyses we have been sent."
- exit 0
-fi
-
-echo $$ > $PIDFILE
-
-while [ true ] ; do
- if test "$LINUX_PLUGIN" != "" ; then
- $SETSID $PPPD $PPP_STD_OPTIONS $DEMAND &
- echo "$!" > $PPPD_PIDFILE
- else
- $SETSID $PPPD pty "$PPPOE_CMD" \
- $PPP_STD_OPTIONS \
- $DEMAND \
- $PPPD_SYNC &
- echo "$!" > $PPPD_PIDFILE
- fi
- wait
-
- # Run /etc/ppp/adsl-lost if it exists
- test -x /etc/ppp/adsl-lost && /etc/ppp/adsl-lost
-
- # Re-establish the connection
- $LOGGER -p daemon.notice \
- "ADSL connection lost; attempting re-connection."
-
- # Wait a bit in case a problem causes tons of log messages :-)
- sleep 5
-done
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in b/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in
deleted file mode 100755
index 936f5fba7..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-# adsl This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc. This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-# Modifed to work with SuSE 6.4 linux by Gary Cameron.
-#
-# Source function library.
-#. /etc/rc.d/init.d/functions # For red hat?
-. /etc/rc.config # For SuSE, enables setting from /etc/rc.config
-
-#Tweak this
-restart_time=120
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-
-test "$ADSL_START" = "yes" || exit 0
-
-# The echo return value for success (defined in /etc/rc.config).
-return=$rc_done
-case "$1" in
- start)
- echo -n "Bringing up ADSL link"
- $START > /dev/null 2>&1 || return=$rc_failed
- echo -e "$return"
- ;;
-
- stop)
- echo -n "Shutting down ADSL link"
- $STOP > /dev/null 2>&1 || return=$rc_failed
- echo -e "$return"
- ;;
-
- restart)
- $0 stop
- echo "Waiting" $restart_time "seconds for the host to reset itself"
- sleep $restart_time #Note: Need time for host to reset itself
- $0 start
- ;;
-
- status)
- $STATUS
- ;;
-
- *)
- echo "Usage: adsl {start|stop|restart|status}"
- exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in b/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in
deleted file mode 100755
index 3b22f1345..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-# adsl This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc. This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Source function library if it exists
-test -r /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-case "$1" in
- start)
- echo -n "Bringing up ADSL link: "
-
- $START
- if [ $? = 0 ] ; then
- echo success
- touch /var/lock/subsys/adsl
- else
- echo failure
- fi
- ;;
-
- stop)
- echo -n "Shutting down ADSL link: "
-
- $STOP > /dev/null 2>&1
- if [ $? = 0 ] ; then
- echo success
- rm -f /var/lock/subsys/adsl
- else
- echo failure
- fi
- ;;
-
- restart)
- $0 stop
- $0 start
- ;;
-
- status)
- $STATUS
- ;;
-
- *)
- echo "Usage: adsl {start|stop|restart|status}"
- exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init.in b/mdk-stage1/rp-pppoe/scripts/adsl-init.in
deleted file mode 100755
index ab9146fd3..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init.in
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-#
-# adsl This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc. This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Source function library if it exists
-test -r /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-case "$1" in
- start)
- echo -n "Bringing up ADSL link"
-
- $START
- if [ $? = 0 ] ; then
- touch /var/lock/subsys/adsl
- echo_success
- else
- echo_failure
- fi
- echo ""
- ;;
-
- stop)
- echo -n "Shutting down ADSL link"
-
- $STOP > /dev/null 2>&1
- if [ $? = 0 ] ; then
- rm -f /var/lock/subsys/adsl
- echo_success
- else
- echo_failure
- fi
- echo ""
- ;;
-
- restart)
- $0 stop
- $0 start
- ;;
-
- status)
- $STATUS
- ;;
-
- *)
- echo "Usage: adsl {start|stop|restart|status}"
- exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-setup.in b/mdk-stage1/rp-pppoe/scripts/adsl-setup.in
deleted file mode 100755
index a8c7fa039..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-setup.in
+++ /dev/null
@@ -1,346 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# adsl-setup
-#
-# All-purpose slicing/dicing shell script to configure rp-pppoe.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-IFCONFIG=/sbin/ifconfig
-PPPD=@PPPD@
-PPPOE=@sbindir@/pppoe
-ECHO=@ECHO@
-LOGGER="/usr/bin/logger -t `basename $0`"
-
-CONFIG=/etc/ppp/pppoe.conf
-
-# Protect created files
-umask 077
-
-copy() {
- cp $1 $2
- if [ "$?" != 0 ] ; then
- $ECHO "*** Error copying $1 to $2"
- $ECHO "*** Quitting."
- exit 1
- fi
-}
-
-$ECHO "Welcome to the Roaring Penguin ADSL client setup. First, I will run"
-$ECHO "some checks on your system to make sure the PPPoE client is installed"
-$ECHO "properly..."
-$ECHO ""
-
-# Must be root
-if [ "`@ID@ -u`" != 0 ] ; then
- $ECHO "$0: Sorry, you must be root to run this script"
- exit 1
-fi
-
-# Prototype config file must exist
-if [ ! -r "$CONFIG" ] ; then
- $ECHO "Oh, dear, I don't see the file '$CONFIG' anywhere. Please"
- $ECHO "re-install the PPPoE client."
- exit 1
-fi
-
-# Must have pppd
-if [ ! -x $PPPD ] ; then
- $ECHO "Oops, I can't execute the program '$PPPD'. You"
- $ECHO "must install the PPP software suite, version 2.3.10 or later."
- exit 1
-fi
-
-. $CONFIG
-
-if [ "$DEMAND" = "" ] ; then
- DEMAND=no
-fi
-
-# pppoe must exist
-if [ ! -x "$PPPOE" ] ; then
- $ECHO "Oh, dear, I can't execute the program '$PPPOE'. Please"
- $ECHO "re-install the rp-pppoe client."
- exit 1
-fi
-
-$ECHO "Looks good! Now, please enter some information:"
-
-while [ true ] ; do
- $ECHO ""
- $ECHO "USER NAME"
- $ECHO ""
- $ECHO -n ">>> Enter your PPPoE user name (default $USER): "
- read U
-
- if [ "$U" = "" ] ; then
- U="$USER"
- fi
-
- # Under Linux, "fix" the default interface if eth1 is not available
- if test `uname -s` = "Linux" ; then
- $IFCONFIG $ETH > /dev/null 2>&1 || ETH=eth0
- fi
- $ECHO ""
- $ECHO "INTERFACE"
- $ECHO ""
- $ECHO ">>> Enter the Ethernet interface connected to the ADSL modem"
- $ECHO "For Solaris, this is likely to be something like /dev/hme0."
- $ECHO "For Linux, it will be ethn, where 'n' is a number."
- $ECHO -n "(default $ETH): "
- read E
-
- if [ "$E" = "" ] ; then
- E="$ETH"
- fi
-
- $ECHO ""
- $ECHO "Do you want the link to come up on demand, or stay up continuously?"
- $ECHO "If you want it to come up on demand, enter the idle time in seconds"
- $ECHO "after which the link should be dropped. If you want the link to"
- $ECHO "stay up permanently, enter 'no' (two letters, lower-case.)"
- $ECHO "NOTE: Demand-activated links do not interact well with dynamic IP"
- $ECHO "addresses. You may have some problems with demand-activated links."
- $ECHO -n ">>> Enter the demand value (default $DEMAND): "
- read D
- if [ "$D" = "" ] ; then
- D=$DEMAND
- fi
-
- $ECHO ""
- $ECHO "DNS"
- $ECHO ""
- $ECHO "Please enter the IP address of your ISP's primary DNS server."
- $ECHO "If your ISP claims that 'the server will provide DNS addresses',"
- $ECHO "enter 'server' (all lower-case) here."
- $ECHO "If you just press enter, I will assume you know what you are"
- $ECHO "doing and not modify your DNS setup."
- $ECHO -n ">>> Enter the DNS information here: "
-
- read DNS1
-
-
- if [ "$DNS1" != "" ] ; then
- if [ "$DNS1" != "server" ] ; then
- $ECHO "Please enter the IP address of your ISP's secondary DNS server."
- $ECHO "If you just press enter, I will assume there is only one DNS server."
- $ECHO -n ">>> Enter the secondary DNS server address here: "
- read DNS2
- fi
- fi
-
- while [ true ] ; do
- $ECHO ""
- $ECHO "PASSWORD"
- $ECHO ""
- stty -echo
- $ECHO -n ">>> Please enter your PPPoE password: "
- read PWD1
- $ECHO ""
- $ECHO -n ">>> Please re-enter your PPPoE password: "
- read PWD2
- $ECHO ""
- stty echo
- if [ "$PWD1" = "$PWD2" ] ; then
- break
- fi
-
- $ECHO -n ">>> Sorry, the passwords do not match. Try again? (y/n)"
- read ANS
- case "$ANS" in
- N|No|NO|Non|n|no|non)
- $ECHO "OK, quitting. Bye."
- exit 1
- esac
- done
-
- # Firewalling
- $ECHO ""
- $ECHO "FIREWALLING"
- $ECHO ""
- if test `uname -s` != "Linux" ; then
- $ECHO "Sorry, firewalling is only supported under Linux. Consult"
- $ECHO "your operating system manuals for details on setting up"
- $ECHO "packet filters for your system."
- FIREWALL=NONE
- else
- $ECHO "Please choose the firewall rules to use. Note that these rules are"
- $ECHO "very basic. You are strongly encouraged to use a more sophisticated"
- $ECHO "firewall setup; however, these will provide basic security. If you"
- $ECHO "are running any servers on your machine, you must choose 'NONE' and"
- $ECHO "set up firewalling yourself. Otherwise, the firewall rules will deny"
- $ECHO "access to all standard servers like Web, e-mail, ftp, etc. If you"
- $ECHO "are using SSH, the rules will block outgoing SSH connections which"
- $ECHO "allocate a privileged source port."
- $ECHO ""
- while [ true ] ; do
- $ECHO "The firewall choices are:"
- $ECHO "0 - NONE: This script will not set any firewall rules. You are responsible"
- $ECHO " for ensuring the security of your machine. You are STRONGLY"
- $ECHO " recommended to use some kind of firewall rules."
- $ECHO "1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation"
- $ECHO "2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway"
- $ECHO " for a LAN"
- $ECHO -n ">>> Choose a type of firewall (0-2): "
- read a
- if [ "$a" = 0 -o "$a" = 1 -o "$a" = 2 ] ; then
- break
- fi
- $ECHO "Please enter a number from 0 to 2"
- done
-
- case "$a" in
- 0)
- FIREWALL=NONE
- ;;
- 1)
- FIREWALL=STANDALONE
- ;;
- 2)
- FIREWALL=MASQUERADE
- ;;
- esac
- fi
-
- $ECHO ""
- $ECHO "** Summary of what you entered **"
- $ECHO ""
- $ECHO "Ethernet Interface: $E"
- $ECHO "User name: $U"
- if [ "$D" = "no" ] ; then
- $ECHO "Activate-on-demand: No"
- else
- $ECHO "Activate-on-demand: Yes; idle timeout = $D seconds"
- fi
-
- if [ "$DNS1" != "" ] ; then
- if [ "$DNS1" = "server" ] ; then
- $ECHO "DNS addresses: Supplied by ISP's server"
- else
- $ECHO "Primary DNS: $DNS1"
- if [ "$DNS2" != "" ] ; then
- $ECHO "Secondary DNS: $DNS2"
- fi
- fi
- else
- $ECHO "DNS: Do not adjust"
- fi
- $ECHO "Firewalling: $FIREWALL"
- $ECHO ""
- while [ true ] ; do
- $ECHO -n '>>> Accept these settings and adjust configuration files (y/n)? '
- read ANS
- case "ANS" in
- Y|y|yes|Yes|oui|Oui)
- ANS=y
- ;;
- N|n|no|No|non|Non)
- ANS=n
- ;;
- esac
- if [ "$ANS" = "y" -o "$ANS" = "n" ] ; then
- break
- fi
- done
- if [ "$ANS" = "y" ] ; then
- break
- fi
-done
-
-# Adjust configuration files. First to $CONFIG
-
-$ECHO "Adjusting $CONFIG"
-
-copy $CONFIG $CONFIG-bak
-if [ "$DNS1" = "server" ] ; then
- DNSTYPE=SERVER
- DNS1=""
- USEPEERDNS=yes
-else
- USEPEERDNS=no
- if [ "$DNS1" = "" ] ; then
- DNSTYPE=NOCHANGE
- else
- DNSTYPE=SPECIFY
- fi
-fi
-
-# Where is pppd likely to put its pid?
-if [ -d /var/run ] ; then
- VARRUN=/var/run
-else
- VARRUN=/etc/ppp
-fi
-
-# Some #$(*& ISP's use a slash in the user name...
-sed -e "s&^USER=.*&USER='$U'&" \
- -e "s&^ETH=.*&ETH='$E'&" \
- -e "s&^PIDFILE=.*&PIDFILE=\"$VARRUN/\$CF_BASE-adsl.pid\"&" \
- -e "s/^FIREWALL=.*/FIREWALL=$FIREWALL/" \
- -e "s/^DEMAND=.*/DEMAND=$D/" \
- -e "s/^DNSTYPE=.*/DNSTYPE=$DNSTYPE/" \
- -e "s/^DNS1=.*/DNS1=$DNS1/" \
- -e "s/^DNS2=.*/DNS2=$DNS2/" \
- -e "s/^USEPEERDNS=.*/USEPEERDNS=$USEPEERDNS/" \
- < $CONFIG-bak > $CONFIG
-
-if [ $? != 0 ] ; then
- $ECHO "** Error modifying $CONFIG"
- $ECHO "** Quitting"
- exit 1
-fi
-
-if [ "$DNS1" != "" ] ; then
- if [ "$DNS1" != "server" ] ; then
- $ECHO "Adjusting /etc/resolv.conf"
- if [ -r /etc/resolv.conf ] ; then
- grep -s "MADE-BY-RP-PPPOE" /etc/resolv.conf > /dev/null 2>&1
- if [ "$?" != 0 ] ; then
- $ECHO " (But first backing it up to /etc/resolv.conf-bak)"
- copy /etc/resolv.conf /etc/resolv.conf-bak
- fi
- fi
- $ECHO "# MADE-BY-RP-PPPOE" > /etc/resolv.conf
- $ECHO "nameserver $DNS1" >> /etc/resolv.conf
- if [ "$DNS2" != "" ] ; then
- $ECHO "nameserver $DNS2" >> /etc/resolv.conf
- fi
- fi
-fi
-
-$ECHO "Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets"
-if [ -r /etc/ppp/pap-secrets ] ; then
- $ECHO " (But first backing it up to /etc/ppp/pap-secrets-bak)"
- copy /etc/ppp/pap-secrets /etc/ppp/pap-secrets-bak
-else
- cp /dev/null /etc/ppp/pap-secrets-bak
-fi
-if [ -r /etc/ppp/chap-secrets ] ; then
- $ECHO " (But first backing it up to /etc/ppp/chap-secrets-bak)"
- copy /etc/ppp/chap-secrets /etc/ppp/chap-secrets-bak
-else
- cp /dev/null /etc/ppp/chap-secrets-bak
-fi
-
-egrep -v "^$U|^\"$U\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets
-$ECHO "\"$U\" * \"$PWD1\"" >> /etc/ppp/pap-secrets
-egrep -v "^$U|^\"$U\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets
-$ECHO "\"$U\" * \"$PWD1\"" >> /etc/ppp/chap-secrets
-
-$ECHO ""
-$ECHO ""
-$ECHO ""
-$ECHO "Congratulations, it should be all set up!"
-$ECHO ""
-$ECHO "Type 'adsl-start' to bring up your ADSL link and 'adsl-stop' to bring"
-$ECHO "it down. Type 'adsl-status' to see the link status."
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-start.in b/mdk-stage1/rp-pppoe/scripts/adsl-start.in
deleted file mode 100755
index 33251a851..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-start.in
+++ /dev/null
@@ -1,186 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-start
-#
-# Shell script to bring up an ADSL connection
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-start [config_file]
-# adsl-start interface user [config_file]
-# Second form overrides USER and ETH from config file.
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-CONNECT=@sbindir@/adsl-connect
-ECHO=@ECHO@
-IFCONFIG=/sbin/ifconfig
-
-# Defaults
-CONFIG=/etc/ppp/pppoe.conf
-USER=""
-ETH=""
-ME=`basename $0`
-# Must be root
-if [ "`@ID@ -u`" != 0 ] ; then
- $ECHO "$ME: You must be root to run this script" >& 2
- exit 1
-fi
-
-# Debugging
-if [ "$DEBUG" = "1" ] ; then
- $ECHO "*** Running in debug mode... please be patient..."
- DEBUG=/tmp/pppoe-debug-$$
- export DEBUG
- mkdir $DEBUG
- if [ "$?" != 0 ] ; then
- $ECHO "Could not create directory $DEBUG... exiting"
- exit 1
- fi
- DEBUG=$DEBUG/pppoe-debug.txt
-
- # Initial debug output
- $ECHO "---------------------------------------------" > $DEBUG
- $ECHO "* The following section contains information about your system" >> $DEBUG
- date >> $DEBUG
- $ECHO "Output of uname -a" >> $DEBUG
- uname -a >> $DEBUG
- $ECHO "---------------------------------------------" >> $DEBUG
- $ECHO "* The following section contains information about your network" >> $DEBUG
- $ECHO "* interfaces. The one you chose for PPPoE should contain the words:" >> $DEBUG
- $ECHO "* 'UP' and 'RUNNING'. If it does not, you probably have an Ethernet" >> $DEBUG
- $ECHO "* driver problem." >> $DEBUG
- $ECHO "Output of ifconfig -a" >> $DEBUG
- $IFCONFIG -a >> $DEBUG
- $ECHO "---------------------------------------------" >> $DEBUG
- if [ "`uname -s`" = "Linux" ] ; then
- $ECHO "* The following section contains information about kernel modules" >> $DEBUG
- $ECHO "* If the module for your Ethernet card is 'tulip', you might" >> $DEBUG
- $ECHO "* want to look for an updated version at http://www.scyld.com" >> $DEBUG
- $ECHO "Output of lsmod" >> $DEBUG
- lsmod >> $DEBUG
- $ECHO "---------------------------------------------" >> $DEBUG
- fi
- $ECHO "* The following section lists your routing table." >> $DEBUG
- $ECHO "* If you have an entry which starts with '0.0.0.0', you probably" >> $DEBUG
- $ECHO "* have defined a default route and gateway, and pppd will" >> $DEBUG
- $ECHO "* not create a default route using your ISP. Try getting" >> $DEBUG
- $ECHO "* rid of this route." >> $DEBUG
- $ECHO "Output of netstat -n -r" >> $DEBUG
- netstat -n -r >> $DEBUG
- $ECHO "---------------------------------------------" >> $DEBUG
- $ECHO "Contents of /etc/resolv.conf" >> $DEBUG
- $ECHO "* The following section lists DNS setup." >> $DEBUG
- $ECHO "* If you can browse by IP address, but not name, suspect" >> $DEBUG
- $ECHO "* a DNS problem." >> $DEBUG
- cat /etc/resolv.conf >> $DEBUG
- $ECHO "---------------------------------------------" >> $DEBUG
- $ECHO "* The following section lists /etc/ppp/options." >> $DEBUG
- $ECHO "* You should have NOTHING in that file." >> $DEBUG
- $ECHO "Contents of /etc/ppp/options" >> $DEBUG
- cat /etc/ppp/options >> $DEBUG 2>/dev/null
- $ECHO "---------------------------------------------" >> $DEBUG
-else
- DEBUG=""
-fi
-
-# Sort out command-line arguments
-case "$#" in
- 1)
- CONFIG="$1"
- ;;
- 3)
- CONFIG="$3"
- ;;
-esac
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
- $ECHO "$ME: Cannot read configuration file '$CONFIG'" >& 2
- exit 1
-fi
-
-. $CONFIG
-
-# Check for command-line overriding of ETH and USER
-case "$#" in
- 2|3)
- ETH="$1"
- USER="$2"
- ;;
-esac
-
-# Check for pidfile
-if [ -r "$PIDFILE" ] ; then
- PID=`cat "$PIDFILE"`
- # Check if still running
- kill -0 $PID > /dev/null 2>&1
- if [ $? = 0 ] ; then
- $ECHO "$ME: There already seems to be an ADSL connection up (PID $PID)" >& 2
- exit 1
- fi
- # Delete bogus PIDFILE
- rm -f "$PIDFILE" "$PIDFILE.pppd" "$PIDFILE.pppoe" "$PIDFILE.start"
-fi
-
-echo $$ > $PIDFILE.start
-
-# Start the connection in the background unless we're debugging
-if [ "$DEBUG" != "" ] ; then
- $CONNECT "$@"
- exit 0
-fi
-
-$CONNECT "$@" > /dev/null 2>&1 &
-CONNECT_PID=$!
-
-if [ "$CONNECT_TIMEOUT" = "" -o "$CONNECT_TIMEOUT" = 0 ] ; then
- exit 0
-fi
-
-# Don't monitor connection if dial-on-demand
-if [ "$DEMAND" != "" -a "$DEMAND" != "no" ] ; then
- exit 0
-fi
-
-# Monitor connection
-TIME=0
-while [ true ] ; do
- @sbindir@/adsl-status $CONFIG > /dev/null 2>&1
-
- # Looks like the interface came up
- if [ $? = 0 ] ; then
- # Print newline if standard input is a TTY
- tty -s && $ECHO " Connected!"
- exit 0
- fi
-
- if test -n "$FORCEPING" ; then
- $ECHO -n "$FORCEPING"
- else
- tty -s && $ECHO -n "$PING"
- fi
- sleep $CONNECT_POLL
- TIME=`expr $TIME + $CONNECT_POLL`
- if [ $TIME -gt $CONNECT_TIMEOUT ] ; then
- break
- fi
-done
-
-$ECHO "TIMED OUT" >& 2
-# Timed out! Kill the adsl-connect process and quit
-kill $CONNECT_PID > /dev/null 2>&1
-exit 1
-
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-status b/mdk-stage1/rp-pppoe/scripts/adsl-status
deleted file mode 100755
index 18b100ab2..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-status
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# adsl-status
-#
-# Shell script to report on status of ADSL connection
-#
-# Copyright (C) 2000-2001 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-status [config_file]
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-# Defaults
-CONFIG=/etc/ppp/pppoe.conf
-
-case "$#" in
- 1)
- CONFIG="$1"
- ;;
-esac
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
- echo "$0: Cannot read configuration file '$CONFIG'" >& 2
- exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-
-if [ "$DEMAND" != "no" ] ; then
- echo "Note: You have enabled demand-connection; adsl-status may be inaccurate."
-fi
-
-# If no PPPOE_PIDFILE, connection is down, unless we're using the Linux plugin
-if [ "$LINUX_PLUGIN" = "" ] ; then
- if [ ! -r "$PPPOE_PIDFILE" ] ; then
- echo "adsl-status: Link is down (can't read pppoe PID file $PPPOE_PIDFILE)"
- exit 1
- fi
-fi
-
-# If no PPPD_PIDFILE, something fishy!
-if [ ! -r "$PPPD_PIDFILE" ] ; then
- echo "adsl-status: Link is down (can't read pppd PID file $PPPD_PIDFILE)"
- exit 1
-fi
-
-PPPD_PID=`cat "$PPPD_PIDFILE"`
-
-# Sigh. Some versions of pppd put PID files in /var/run; others put them
-# in /etc/ppp. Since it's too messy to figure out what pppd does, we
-# try both locations.
-for i in /etc/ppp/ppp*.pid /var/run/ppp*.pid ; do
- if [ -r $i ] ; then
- PID=`cat $i`
- if [ "$PID" = "$PPPD_PID" ] ; then
- IF=`basename $i .pid`
- netstat -rn | grep " ${IF}\$" > /dev/null
- # /sbin/ifconfig $IF | grep "UP.*POINTOPOINT" > /dev/null
- if [ "$?" != "0" ] ; then
- echo "adsl-status: Link is attached to $IF, but $IF is down"
- exit 1
- fi
- echo "adsl-status: Link is up and running on interface $IF"
- /sbin/ifconfig $IF
- exit 0
- fi
- fi
-done
-
-echo "adsl-status: Link is down -- could not find interface corresponding to"
-echo "pppd pid $PPPD_PID"
-exit 1 \ No newline at end of file
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-stop.in b/mdk-stage1/rp-pppoe/scripts/adsl-stop.in
deleted file mode 100755
index af0867573..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-stop.in
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-stop
-#
-# Shell script to bring down an ADSL connection
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-stop [config_file]
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-ME="`basename $0`"
-LOGGER="/usr/bin/logger -t $ME"
-CONFIG="$1"
-if [ "$CONFIG" = "" ] ; then
- CONFIG=/etc/ppp/pppoe.conf
-fi
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
- echo "$ME: Cannot read configuration file '$CONFIG'" >& 2
- exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-STARTPID="$PIDFILE.start"
-
-# Backward config file compatibility
-if test "$DEMAND" = "" ; then
- DEMAND=no
-fi
-
-# Ignore SIGTERM
-trap "" 15
-
-# Check for pidfile
-if [ -r "$PIDFILE" ] ; then
- PID=`cat $PIDFILE`
-
- # Check if still running
- kill -0 $PID > /dev/null 2>&1
- if [ $? != 0 ] ; then
- echo "$ME: The adsl-connect script (PID $PID) appears to have died" >& 2
- fi
-
- # Kill pppd, which should in turn kill pppoe
- if [ -r "$PPPD_PIDFILE" ] ; then
- PPPD_PID=`cat "$PPPD_PIDFILE"`
- $LOGGER -p daemon.notice "Killing pppd"
- echo "Killing pppd ($PPPD_PID)"
- kill $PPPD_PID > /dev/null 2>&1 || exit 1
- fi
-
- # Kill adsl-start
- PIDS=`cat $STARTPID`
- kill -0 $PIDS > /dev/null 2>&1
- if [ $? = 0 ] ; then
- $LOGGER -p daemon.notice "Killing adsl-connect"
- kill $PIDS > /dev/null 2>&1
- fi
-
- # Kill adsl-connect
- $LOGGER -p daemon.notice "Killing adsl-connect"
- echo "Killing adsl-connect ($PID)"
- kill $PID > /dev/null 2>&1
-
- rm -f "$PIDFILE" "$PPPD_PIDFILE" "$PPPOE_PIDFILE" "$STARTPID"
-else
- echo "$ME: No ADSL connection appears to be running" >&2
- exit 1
-fi
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/src/.cvsignore b/mdk-stage1/rp-pppoe/src/.cvsignore
deleted file mode 100644
index a59197332..000000000
--- a/mdk-stage1/rp-pppoe/src/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-pppoe
-pppoe-DIET
diff --git a/mdk-stage1/rp-pppoe/src/Makefile b/mdk-stage1/rp-pppoe/src/Makefile
deleted file mode 100644
index f96b5714e..000000000
--- a/mdk-stage1/rp-pppoe/src/Makefile
+++ /dev/null
@@ -1,58 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-TARGETS = pppoe
-
-ifeq (DIETLIBC, $(L))
-TARGETS += pppoe-DIET
-endif
-
-BINTARGET = ../pppoe-bin
-
-
-all: $(TARGETS)
-
-clean:
- rm -f *.o *.a $(BINTARGET) pppoe pppoe-DIET
-
-FLAGS = -Wall -Werror -Os -fomit-frame-pointer '-DPPPOE_PATH="/sbin/pppoe"' '-DPPPD_PATH="/sbin/pppd"' '-DVERSION="3.0-stg1"'
-
-
-
-OBJS = pppoe.o if.o debug.o common.o ppp.o discovery.o
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-
-pppoe: $(OBJS)
- gcc -static -o $@ $^
- $(STRIPCMD) $@
- cp -f $@ $(BINTARGET)
-
-pppoe-DIET: $(OBJS-DIET)
- gcc $(DIETLIBC_LDFLAGS_STAGE1) -o $@ $^ $(DIETLIBC_LIBC)
- $(STRIPCMD) $@
- cp -f $@ $(BINTARGET)
-
-$(OBJS): %.o: %.c
- gcc $(FLAGS) $(GLIBC_INCLUDES) $(INCS) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
- gcc $(FLAGS) $(DIETLIBC_INCLUDES) $(INCS) -c $< -o $@
-
diff --git a/mdk-stage1/rp-pppoe/src/Makefile.in b/mdk-stage1/rp-pppoe/src/Makefile.in
deleted file mode 100644
index 8eee012cb..000000000
--- a/mdk-stage1/rp-pppoe/src/Makefile.in
+++ /dev/null
@@ -1,257 +0,0 @@
-# @configure_input@
-#***********************************************************************
-#
-# Makefile
-#
-# Makefile for Roaring Penguin's Linux user-space PPPoE client.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# This program may be distributed according to the terms of the GNU
-# General Public License, version 2 or (at your option) any later version.
-#
-# $Id$
-#***********************************************************************
-
-# Version is set ONLY IN THE MAKEFILE! Don't delete this!
-VERSION=3.0
-
-DEFINES=
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-mandir=@mandir@
-docdir=@prefix@/doc/rp-pppoe-$(VERSION)
-install=@INSTALL@
-install_dir=@INSTALL@ -d
-sbindir=@sbindir@
-
-# Plugin for pppd on Linux
-LINUX_KERNELMODE_PLUGIN=@LINUX_KERNELMODE_PLUGIN@
-PPPD_INCDIR=@PPPD_INCDIR@
-
-# PPPoE relay -- currently only supported on Linux
-PPPOE_RELAY=@PPPOE_RELAY@
-
-# Program paths
-PPPOE_PATH=$(sbindir)/pppoe
-PPPD_PATH=@PPPD@
-
-# Kernel-mode plugin gets installed here.
-PLUGIN_DIR=/etc/ppp/plugins
-PLUGIN_PATH=$(PLUGIN_DIR)/rp-pppoe.so
-
-# Configuration file paths
-PPPOESERVER_PPPD_OPTIONS=/etc/ppp/pppoe-server-options
-
-PATHS='-DPPPOE_PATH="$(PPPOE_PATH)"' '-DPPPD_PATH="$(PPPD_PATH)"' \
- '-DPLUGIN_PATH="$(PLUGIN_PATH)"' \
- '-DPPPOE_SERVER_OPTIONS="$(PPPOESERVER_PPPD_OPTIONS)"'
-
-CFLAGS= @CFLAGS@ $(DEFINES) $(PATHS)
-TARGETS=@TARGETS@
-
-all: $(TARGETS)
- @echo ""
- @echo "Type 'make install' as root to install the software."
-
-pppoe-sniff: pppoe-sniff.o if.o common.o debug.o
- @CC@ -o pppoe-sniff pppoe-sniff.o if.o common.o debug.o $(LIBS)
-
-pppoe-server: pppoe-server.o if.o debug.o common.o md5.o
- @CC@ -o pppoe-server pppoe-server.o if.o debug.o common.o md5.o $(LIBS)
-
-pppoe: pppoe.o if.o debug.o common.o ppp.o discovery.o
- @CC@ -o pppoe pppoe.o if.o debug.o common.o ppp.o discovery.o $(LIBS)
-
-pppoe-relay: relay.o if.o debug.o common.o
- @CC@ -o pppoe-relay relay.o if.o debug.o common.o $(LIBS)
-
-pppoe.o: pppoe.c pppoe.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o pppoe.o pppoe.c
-
-discovery.o: discovery.c pppoe.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o discovery.o discovery.c
-
-ppp.o: ppp.c pppoe.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o ppp.o ppp.c
-
-md5.o: md5.c md5.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o md5.o md5.c
-
-pppoe-server.o: pppoe-server.c pppoe.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o pppoe-server.o pppoe-server.c
-
-pppoe-sniff.o: pppoe-sniff.c pppoe.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o pppoe-sniff.o pppoe-sniff.c
-
-if.o: if.c pppoe.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o if.o if.c
-
-common.o: common.c pppoe.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o common.o common.c
-
-debug.o: debug.c pppoe.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o debug.o debug.c
-
-relay.o: relay.c relay.h pppoe.h
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o relay.o relay.c
-
-# Linux-specific plugin
-rp-pppoe.so: plugin/libplugin.a plugin/plugin.o
- @CC@ -o rp-pppoe.so -shared plugin/plugin.o plugin/libplugin.a
-
-plugin/plugin.o: plugin.c
- @CC@ '-DVERSION="$(VERSION)"' -I$(PPPD_INCDIR) -c -o plugin/plugin.o -fPIC plugin.c
-
-plugin/libplugin.a: plugin/discovery.o plugin/if.o plugin/common.o plugin/debug.o
- ar -rc $@ $^
-
-plugin/discovery.o: discovery.c
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/discovery.o -fPIC discovery.c
-
-plugin/if.o: if.c
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/if.o -fPIC if.c
-
-plugin/debug.o: debug.c
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/debug.o -fPIC debug.c
-
-plugin/common.o: common.c
- @CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/common.o -fPIC common.c
-
-install: all
- -mkdir -p $(RPM_INSTALL_ROOT)$(sbindir)
- $(install) -m 755 -s pppoe $(RPM_INSTALL_ROOT)$(sbindir)
- $(install) -m 755 -s pppoe-server $(RPM_INSTALL_ROOT)$(sbindir)
- if test -x pppoe-relay ; then $(install) -m 755 -s pppoe-relay $(RPM_INSTALL_ROOT)$(sbindir); fi
- $(install) -m 755 -s pppoe-sniff $(RPM_INSTALL_ROOT)$(sbindir)
- $(install) -m 755 ../scripts/adsl-connect $(RPM_INSTALL_ROOT)$(sbindir)
- $(install) -m 755 ../scripts/adsl-start $(RPM_INSTALL_ROOT)$(sbindir)
- $(install) -m 755 ../scripts/adsl-status $(RPM_INSTALL_ROOT)$(sbindir)
- $(install) -m 755 ../scripts/adsl-stop $(RPM_INSTALL_ROOT)$(sbindir)
- $(install) -m 755 ../scripts/adsl-setup $(RPM_INSTALL_ROOT)$(sbindir)
- -mkdir -p $(RPM_INSTALL_ROOT)$(docdir)
- $(install) -m 644 ../doc/CHANGES $(RPM_INSTALL_ROOT)$(docdir)
- $(install) -m 644 ../doc/KERNEL-MODE-PPPOE $(RPM_INSTALL_ROOT)$(docdir)
- $(install) -m 644 ../doc/HOW-TO-CONNECT $(RPM_INSTALL_ROOT)$(docdir)
- $(install) -m 644 ../doc/LICENSE $(RPM_INSTALL_ROOT)$(docdir)
- $(install) -m 644 ../README $(RPM_INSTALL_ROOT)$(docdir)
- $(install) -m 644 ../configs/pap-secrets $(RPM_INSTALL_ROOT)$(docdir)
- -mkdir -p $(RPM_INSTALL_ROOT)$(mandir)/man8
- for i in $(TARGETS) ; do \
- if test -f ../man/$$i.8 ; then \
- $(install) -m 644 ../man/$$i.8 $(RPM_INSTALL_ROOT)$(mandir)/man8 || exit 1; \
- fi; \
- done
- $(install) -m 644 ../man/adsl-start.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
- $(install) -m 644 ../man/adsl-stop.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
- $(install) -m 644 ../man/adsl-status.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
- $(install) -m 644 ../man/adsl-connect.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
- $(install) -m 644 ../man/adsl-setup.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
- -mkdir -p $(RPM_INSTALL_ROOT)$(mandir)/man5
- $(install) -m 644 ../man/pppoe.conf.5 $(RPM_INSTALL_ROOT)$(mandir)/man5
- -mkdir -p $(RPM_INSTALL_ROOT)/etc/ppp
- -mkdir -p $(RPM_INSTALL_ROOT)$(PLUGIN_DIR)
- -echo "# Directory created by rp-pppoe for kernel-mode plugin" > $(RPM_INSTALL_ROOT)$(PLUGIN_DIR)/README
- @if test -r rp-pppoe.so; then $(install) -m 755 rp-pppoe.so $(RPM_INSTALL_ROOT)$(PLUGIN_DIR); fi
- @for i in pppoe.conf firewall-standalone firewall-masq ; do \
- if [ ! -f $(RPM_INSTALL_ROOT)/etc/ppp/$$i ] ; then \
- $(install) -m 644 ../configs/$$i $(RPM_INSTALL_ROOT)/etc/ppp ; \
- else \
- echo "NOT overwriting existing $(RPM_INSTALL_ROOT)/etc/ppp/$$i" ;\
- $(install) -m 644 ../configs/$$i $(RPM_INSTALL_ROOT)/etc/ppp/$$i-$(VERSION) ;\
- fi ;\
- done
- @if [ ! -f $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS) ] ; then \
- $(install) -m 644 ../configs/pppoe-server-options $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS) ; \
- else \
- echo "NOT overwriting existing $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS)"; \
- $(install) -m 644 ../configs/pppoe-server-options $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS)-example ; \
- fi
- @if [ -f /etc/redhat-release ] ; then \
- echo "Looks like a Red Hat system; installing $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl" ; \
- mkdir -p $(RPM_INSTALL_ROOT)/etc/rc.d/init.d ;\
- $(install) -m 755 ../scripts/adsl-init $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl ; \
- fi
- @if [ -f /etc/turbolinux-release ] ; then \
- echo "Looks like a TurboLinux system; installing $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl" ; \
- mkdir -p $(RPM_INSTALL_ROOT)/etc/rc.d/init.d ;\
- $(install) -m 755 adsl-init-turbolinux $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl ; \
- fi
- @if [ -f /etc/SuSE-release ] ; then \
- echo "Looks like a SuSE Linux system; installing $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl" ; \
- mkdir -p $(RPM_INSTALL_ROOT)/etc/rc.d/init.d ;\
- $(install) -m 755 ../scripts/adsl-init-suse $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl ; \
- fi
- @echo ""
- @echo "Type 'adsl-setup' to configure the software."
-
-distro:
- cd ..; \
- rm -rf rp-pppoe-$(VERSION) ; \
- mkdir rp-pppoe-$(VERSION) || exit 1; \
- for i in README go go-gui rp-pppoe.spec rp-pppoe-gui.spec; do \
- cp $$i rp-pppoe-$(VERSION) || exit 1; \
- done ; \
- mkdir rp-pppoe-$(VERSION)/gui || exit 1; \
- for i in Makefile.in tkpppoe.in wrapper.c tkpppoe.1 pppoe-wrapper.1 ; do \
- cp gui/$$i rp-pppoe-$(VERSION)/gui || exit 1; \
- done; \
- mkdir rp-pppoe-$(VERSION)/gui/html || exit 1; \
- for i in mainwin-busy.png mainwin-nonroot.png mainwin.png props-advanced.png props-basic.png props-nic.png props-options.png tkpppoe.html ; do \
- cp gui/html/$$i rp-pppoe-$(VERSION)/gui/html || exit 1; \
- done; \
- mkdir rp-pppoe-$(VERSION)/configs || exit 1; \
- for i in firewall-masq firewall-standalone pap-secrets pppoe-server-options pppoe.conf ; do \
- cp configs/$$i rp-pppoe-$(VERSION)/configs || exit 1; \
- done ; \
- mkdir rp-pppoe-$(VERSION)/doc || exit 1; \
- for i in CHANGES KERNEL-MODE-PPPOE HOW-TO-CONNECT LICENSE PROBLEMS ; do \
- cp doc/$$i rp-pppoe-$(VERSION)/doc || exit 1; \
- done; \
- mkdir rp-pppoe-$(VERSION)/man || exit 1; \
- for i in adsl-connect.8 adsl-setup.8 adsl-start.8 adsl-status.8 adsl-stop.8 pppoe-server.8 pppoe-sniff.8 pppoe.8 pppoe-relay.8 pppoe.conf.5 ; do \
- cp man/$$i rp-pppoe-$(VERSION)/man || exit 1; \
- done; \
- mkdir rp-pppoe-$(VERSION)/scripts || exit 1; \
- for i in adsl-connect.in adsl-init-suse.in adsl-init-turbolinux.in adsl-init.in adsl-setup.in adsl-start.in adsl-stop.in adsl-status ; do \
- cp scripts/$$i rp-pppoe-$(VERSION)/scripts || exit 1; \
- done; \
- mkdir rp-pppoe-$(VERSION)/src || exit 1; \
- for i in Makefile.in install-sh common.c config.h.in configure configure.in debug.c discovery.c if.c md5.c md5.h ppp.c pppoe-server.c pppoe-sniff.c pppoe.c pppoe.h plugin.c relay.c relay.h ; do \
- cp src/$$i rp-pppoe-$(VERSION)/src || exit 1; \
- done; \
- mkdir rp-pppoe-$(VERSION)/src/plugin || exit 1; \
- tar cvf rp-pppoe-$(VERSION).tar rp-pppoe-$(VERSION)/* ; \
- gzip -f -v -9 rp-pppoe-$(VERSION).tar ; \
-
-rpms: distro
- cp ../rp-pppoe-$(VERSION).tar.gz /usr/src/redhat/SOURCES
- cd ..; \
- rpm -ba rp-pppoe.spec; \
- rpm -ba rp-pppoe-gui.spec
-
-clean:
- rm -f *.o pppoe pppoe-sniff pppoe-server core rp-pppoe.so plugin/*.o plugin/libplugin.a *~
-
-distclean: clean
- rm -f Makefile config.h config.cache config.log config.status
- rm -f ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-setup ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux
-
-update-version:
- sed -e 's/^Version: .*$$/Version: $(VERSION)/' ../rp-pppoe.spec > ../rp-pppoe.spec.new && mv ../rp-pppoe.spec.new ../rp-pppoe.spec
- sed -e 's+^Source: .*$$+Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-$(VERSION).tar.gz+' ../rp-pppoe.spec > ../rp-pppoe.spec.new && mv ../rp-pppoe.spec.new ../rp-pppoe.spec
- sed -e 's/^Version: .*$$/Version: $(VERSION)/' ../rp-pppoe-gui.spec > ../rp-pppoe-gui.spec.new && mv ../rp-pppoe-gui.spec.new ../rp-pppoe-gui.spec
- sed -e 's+^Source: .*$$+Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-$(VERSION).tar.gz+' ../rp-pppoe-gui.spec > ../rp-pppoe-gui.spec.new && mv ../rp-pppoe-gui.spec.new ../rp-pppoe-gui.spec
- sed -e 's+^Requires: rp-pppoe >=.*$$+Requires: rp-pppoe >= $(VERSION)+' ../rp-pppoe-gui.spec > ../rp-pppoe-gui.spec.new && mv ../rp-pppoe-gui.spec.new ../rp-pppoe-gui.spec
-
-# Convenience target for David! Don't try to use this one.
-km:
- ./configure --enable-plugin=/home/dfs/Archive/PPP/ppp-2.4.0.pppoe4-patched-dfs
-
-.PHONY: update-version
-
-.PHONY: clean
-
-.PHONY: distclean
-
-.PHONY: rpms
diff --git a/mdk-stage1/rp-pppoe/src/common.c b/mdk-stage1/rp-pppoe/src/common.c
deleted file mode 100644
index b27302104..000000000
--- a/mdk-stage1/rp-pppoe/src/common.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/***********************************************************************
-*
-* common.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Common functions used by PPPoE client and server
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-/**********************************************************************
-*%FUNCTION: parsePacket
-*%ARGUMENTS:
-* packet -- the PPPoE discovery packet to parse
-* func -- function called for each tag in the packet
-* extra -- an opaque data pointer supplied to parsing function
-*%RETURNS:
-* 0 if everything went well; -1 if there was an error
-*%DESCRIPTION:
-* Parses a PPPoE discovery packet, calling "func" for each tag in the packet.
-* "func" is passed the additional argument "extra".
-***********************************************************************/
-int
-parsePacket(PPPoEPacket *packet, ParseFunc *func, void *extra)
-{
- UINT16_t len = ntohs(packet->length);
- unsigned char *curTag;
- UINT16_t tagType, tagLen;
-
- if (packet->ver != 1) {
- syslog(LOG_ERR, "Invalid PPPoE version (%d)", (int) packet->ver);
- return -1;
- }
- if (packet->type != 1) {
- syslog(LOG_ERR, "Invalid PPPoE type (%d)", (int) packet->type);
- return -1;
- }
-
- /* Do some sanity checks on packet */
- if (len > ETH_DATA_LEN - 6) { /* 6-byte overhead for PPPoE header */
- syslog(LOG_ERR, "Invalid PPPoE packet length (%u)", len);
- return -1;
- }
-
- /* Step through the tags */
- curTag = packet->payload;
- while(curTag - packet->payload < len) {
- /* Alignment is not guaranteed, so do this by hand... */
- tagType = (((UINT16_t) curTag[0]) << 8) +
- (UINT16_t) curTag[1];
- tagLen = (((UINT16_t) curTag[2]) << 8) +
- (UINT16_t) curTag[3];
- if (tagType == TAG_END_OF_LIST) {
- return 0;
- }
- if ((curTag - packet->payload) + tagLen + TAG_HDR_SIZE > len) {
- syslog(LOG_ERR, "Invalid PPPoE tag length (%u)", tagLen);
- return -1;
- }
- func(tagType, tagLen, curTag+TAG_HDR_SIZE, extra);
- curTag = curTag + TAG_HDR_SIZE + tagLen;
- }
- return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: findTag
-*%ARGUMENTS:
-* packet -- the PPPoE discovery packet to parse
-* type -- the type of the tag to look for
-* tag -- will be filled in with tag contents
-*%RETURNS:
-* A pointer to the tag if one of the specified type is found; NULL
-* otherwise.
-*%DESCRIPTION:
-* Looks for a specific tag type.
-***********************************************************************/
-unsigned char *
-findTag(PPPoEPacket *packet, UINT16_t type, PPPoETag *tag)
-{
- UINT16_t len = ntohs(packet->length);
- unsigned char *curTag;
- UINT16_t tagType, tagLen;
-
- if (packet->ver != 1) {
- syslog(LOG_ERR, "Invalid PPPoE version (%d)", (int) packet->ver);
- return NULL;
- }
- if (packet->type != 1) {
- syslog(LOG_ERR, "Invalid PPPoE type (%d)", (int) packet->type);
- return NULL;
- }
-
- /* Do some sanity checks on packet */
- if (len > ETH_DATA_LEN - 6) { /* 6-byte overhead for PPPoE header */
- syslog(LOG_ERR, "Invalid PPPoE packet length (%u)", len);
- return NULL;
- }
-
- /* Step through the tags */
- curTag = packet->payload;
- while(curTag - packet->payload < len) {
- /* Alignment is not guaranteed, so do this by hand... */
- tagType = (((UINT16_t) curTag[0]) << 8) +
- (UINT16_t) curTag[1];
- tagLen = (((UINT16_t) curTag[2]) << 8) +
- (UINT16_t) curTag[3];
- if (tagType == TAG_END_OF_LIST) {
- return NULL;
- }
- if ((curTag - packet->payload) + tagLen + TAG_HDR_SIZE > len) {
- syslog(LOG_ERR, "Invalid PPPoE tag length (%u)", tagLen);
- return NULL;
- }
- if (tagType == type) {
- memcpy(tag, curTag, tagLen + TAG_HDR_SIZE);
- return curTag;
- }
- curTag = curTag + TAG_HDR_SIZE + tagLen;
- }
- return NULL;
-}
-
-/**********************************************************************
-*%FUNCTION: printErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog.
-***********************************************************************/
-void
-printErr(char const *str)
-{
- fprintf(stderr, "pppoe: %s\n", str);
- syslog(LOG_ERR, "%s", str);
-}
-
-
-/**********************************************************************
-*%FUNCTION: strDup
-*%ARGUMENTS:
-* str -- string to copy
-*%RETURNS:
-* A malloc'd copy of str. Exits if malloc fails.
-***********************************************************************/
-char *
-strDup(char const *str)
-{
- char *copy = malloc(strlen(str)+1);
- if (!copy) {
- rp_fatal("strdup failed");
- }
- strcpy(copy, str);
- return copy;
-}
-
-/**********************************************************************
-*%FUNCTION: computeTCPChecksum
-*%ARGUMENTS:
-* ipHdr -- pointer to IP header
-* tcpHdr -- pointer to TCP header
-*%RETURNS:
-* The computed TCP checksum
-***********************************************************************/
-UINT16_t
-computeTCPChecksum(unsigned char *ipHdr, unsigned char *tcpHdr)
-{
- UINT32_t sum = 0;
- UINT16_t count = ipHdr[2] * 256 + ipHdr[3];
- unsigned char *addr = tcpHdr;
- unsigned char pseudoHeader[12];
-
- /* Count number of bytes in TCP header and data */
- count -= (ipHdr[0] & 0x0F) * 4;
-
- memcpy(pseudoHeader, ipHdr+12, 8);
- pseudoHeader[8] = 0;
- pseudoHeader[9] = ipHdr[9];
- pseudoHeader[10] = (count >> 8) & 0xFF;
- pseudoHeader[11] = (count & 0xFF);
-
- /* Checksum the pseudo-header */
- sum += * (UINT16_t *) pseudoHeader;
- sum += * ((UINT16_t *) (pseudoHeader+2));
- sum += * ((UINT16_t *) (pseudoHeader+4));
- sum += * ((UINT16_t *) (pseudoHeader+6));
- sum += * ((UINT16_t *) (pseudoHeader+8));
- sum += * ((UINT16_t *) (pseudoHeader+10));
-
- /* Checksum the TCP header and data */
- while (count > 1) {
- sum += * (UINT16_t *) addr;
- addr += 2;
- count -= 2;
- }
- if (count > 0) {
- sum += *addr;
- }
-
- while(sum >> 16) {
- sum = (sum & 0xffff) + (sum >> 16);
- }
- return (UINT16_t) (~sum & 0xFFFF);
-}
-
-/**********************************************************************
-*%FUNCTION: clampMSS
-*%ARGUMENTS:
-* packet -- PPPoE session packet
-* dir -- either "incoming" or "outgoing"
-* clampMss -- clamp value
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Clamps MSS option if TCP SYN flag is set.
-***********************************************************************/
-void
-clampMSS(PPPoEPacket *packet, char const *dir, int clampMss)
-{
- unsigned char *tcpHdr;
- unsigned char *ipHdr;
- unsigned char *opt;
- unsigned char *endHdr;
- unsigned char *mssopt = NULL;
- UINT16_t csum;
-
- int len;
-
- /* Is it IPv4? */
- if (packet->payload[0] != 0x00 ||
- packet->payload[1] != 0x21) {
- /* Nope, ignore it */
- return;
- }
-
- ipHdr = packet->payload + 2;
-
- /* Is it too short? */
- len = (int) ntohs(packet->length);
- if (len < 42) {
- /* 20 byte IP header; 20 byte TCP header; 2 byte PPP protocol */
- return;
- }
-
- /* Verify once more that it's IPv4 */
- if ((ipHdr[0] & 0xF0) != 0x40) {
- return;
- }
-
- /* Is it a fragment that's not at the beginning of the packet? */
- if ((ipHdr[6] & 0x1F) || ipHdr[7]) {
- /* Yup, don't touch! */
- return;
- }
- /* Is it TCP? */
- if (ipHdr[9] != 0x06) {
- return;
- }
-
- /* Get start of TCP header */
- tcpHdr = ipHdr + (ipHdr[0] & 0x0F) * 4;
-
- /* Is SYN set? */
- if (!(tcpHdr[13] & 0x02)) {
- return;
- }
-
- /* Compute and verify TCP checksum -- do not touch a packet with a bad
- checksum */
- csum = computeTCPChecksum(ipHdr, tcpHdr);
- if (csum) {
- syslog(LOG_ERR, "Bad TCP checksum %x", (unsigned int) csum);
-
- /* Upper layers will drop it */
- return;
- }
-
- /* Look for existing MSS option */
- endHdr = tcpHdr + ((tcpHdr[12] & 0xF0) >> 2);
- opt = tcpHdr + 20;
- while (opt < endHdr) {
- if (!*opt) break; /* End of options */
- switch(*opt) {
- case 1:
- opt++;
- break;
-
- case 2:
- if (opt[1] != 4) {
- /* Something fishy about MSS option length. */
- syslog(LOG_ERR,
- "Bogus length for MSS option (%u) from %u.%u.%u.%u",
- (unsigned int) opt[1],
- (unsigned int) ipHdr[12],
- (unsigned int) ipHdr[13],
- (unsigned int) ipHdr[14],
- (unsigned int) ipHdr[15]);
- return;
- }
- mssopt = opt;
- break;
- default:
- if (opt[1] < 2) {
- /* Someone's trying to attack us? */
- syslog(LOG_ERR,
- "Bogus TCP option length (%u) from %u.%u.%u.%u",
- (unsigned int) opt[1],
- (unsigned int) ipHdr[12],
- (unsigned int) ipHdr[13],
- (unsigned int) ipHdr[14],
- (unsigned int) ipHdr[15]);
- return;
- }
- opt += (opt[1]);
- break;
- }
- /* Found existing MSS option? */
- if (mssopt) break;
- }
-
- /* If MSS exists and it's low enough, do nothing */
- if (mssopt) {
- unsigned mss = mssopt[2] * 256 + mssopt[3];
- if (mss <= clampMss) {
- return;
- }
-
- mssopt[2] = (((unsigned) clampMss) >> 8) & 0xFF;
- mssopt[3] = ((unsigned) clampMss) & 0xFF;
- } else {
- /* No MSS option. Don't add one; we'll have to use 536. */
- return;
- }
-
- /* Recompute TCP checksum */
- tcpHdr[16] = 0;
- tcpHdr[17] = 0;
- csum = computeTCPChecksum(ipHdr, tcpHdr);
- (* (UINT16_t *) (tcpHdr+16)) = csum;
-}
-
-/***********************************************************************
-*%FUNCTION: sendPADT
-*%ARGUMENTS:
-* conn -- PPPoE connection
-* msg -- if non-NULL, extra error message to include in PADT packet.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADT packet
-***********************************************************************/
-void
-sendPADT(PPPoEConnection *conn, char const *msg)
-{
- PPPoEPacket packet;
- unsigned char *cursor = packet.payload;
-
- UINT16_t plen = 0;
-
- /* Do nothing if no session established yet */
- if (!conn->session) return;
-
- /* Do nothing if no discovery socket */
- if (conn->discoverySocket < 0) return;
-
- memcpy(packet.ethHdr.h_dest, conn->peerEth, ETH_ALEN);
- memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-
- packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
- packet.ver = 1;
- packet.type = 1;
- packet.code = CODE_PADT;
- packet.session = conn->session;
-
- /* Reset Session to zero so there is no possibility of
- recursive calls to this function by any signal handler */
- conn->session = 0;
-
- /* If we're using Host-Uniq, copy it over */
- if (conn->useHostUniq) {
- PPPoETag hostUniq;
- pid_t pid = getpid();
- hostUniq.type = htons(TAG_HOST_UNIQ);
- hostUniq.length = htons(sizeof(pid));
- memcpy(hostUniq.payload, &pid, sizeof(pid));
- memcpy(cursor, &hostUniq, sizeof(pid) + TAG_HDR_SIZE);
- cursor += sizeof(pid) + TAG_HDR_SIZE;
- plen += sizeof(pid) + TAG_HDR_SIZE;
- }
-
- /* Copy error message */
- if (msg) {
- PPPoETag err;
- size_t elen = strlen(msg);
- err.type = htons(TAG_GENERIC_ERROR);
- err.length = htons(elen);
- strcpy(err.payload, msg);
- memcpy(cursor, &err, elen + TAG_HDR_SIZE);
- cursor += elen + TAG_HDR_SIZE;
- plen += elen + TAG_HDR_SIZE;
- }
-
- /* Copy cookie and relay-ID if needed */
- if (conn->cookie.type) {
- CHECK_ROOM(cursor, packet.payload,
- ntohs(conn->cookie.length) + TAG_HDR_SIZE);
- memcpy(cursor, &conn->cookie, ntohs(conn->cookie.length) + TAG_HDR_SIZE);
- cursor += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
- plen += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
- }
-
- if (conn->relayId.type) {
- CHECK_ROOM(cursor, packet.payload,
- ntohs(conn->relayId.length) + TAG_HDR_SIZE);
- memcpy(cursor, &conn->relayId, ntohs(conn->relayId.length) + TAG_HDR_SIZE);
- cursor += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
- plen += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
- }
-
- packet.length = htons(plen);
- sendPacket(conn, conn->discoverySocket, &packet, (int) (plen + HDR_SIZE));
- if (conn->debugFile) {
- dumpPacket(conn->debugFile, &packet, "SENT");
- fprintf(conn->debugFile, "\n");
- fflush(conn->debugFile);
- }
- syslog(LOG_INFO,"Sent PADT");
-}
-
-/**********************************************************************
-*%FUNCTION: parseLogErrs
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks error tags out of a packet and logs them.
-***********************************************************************/
-void
-parseLogErrs(UINT16_t type, UINT16_t len, unsigned char *data,
- void *extra)
-{
- switch(type) {
- case TAG_SERVICE_NAME_ERROR:
- syslog(LOG_ERR, "PADT: Service-Name-Error: %.*s", (int) len, data);
- fprintf(stderr, "PADT: Service-Name-Error: %.*s\n", (int) len, data);
- break;
- case TAG_AC_SYSTEM_ERROR:
- syslog(LOG_ERR, "PADT: System-Error: %.*s", (int) len, data);
- fprintf(stderr, "PADT: System-Error: %.*s\n", (int) len, data);
- break;
- case TAG_GENERIC_ERROR:
- syslog(LOG_ERR, "PADT: Generic-Error: %.*s", (int) len, data);
- fprintf(stderr, "PADT: Generic-Error: %.*s\n", (int) len, data);
- break;
- }
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/config.h b/mdk-stage1/rp-pppoe/src/config.h
deleted file mode 100644
index e3adf4353..000000000
--- a/mdk-stage1/rp-pppoe/src/config.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* config.h. Generated automatically by configure. */
-/* config.h.in. Generated automatically from configure.in by autoheader. */
-
-/* Define to empty if the keyword does not work. */
-/* #undef const */
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
-#define HAVE_SYS_WAIT_H 1
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-/* #undef pid_t */
-
-/* Define as the return type of signal handlers (int or void). */
-#define RETSIGTYPE void
-
-/* Define if the setvbuf function takes the buffering type as its second
- argument and the buffer pointer as the third, as on System V
- before release 3. */
-/* #undef SETVBUF_REVERSED */
-
-/* Define if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Define if you can safely include both <sys/time.h> and <time.h>. */
-#define TIME_WITH_SYS_TIME 1
-
-/* Define if your <sys/time.h> declares struct tm. */
-/* #undef TM_IN_SYS_TIME */
-
-#define HAVE_STRUCT_SOCKADDR_LL 1
-
-/* The number of bytes in a unsigned int. */
-#define SIZEOF_UNSIGNED_INT 4
-
-/* The number of bytes in a unsigned long. */
-#define SIZEOF_UNSIGNED_LONG 4
-
-/* The number of bytes in a unsigned short. */
-#define SIZEOF_UNSIGNED_SHORT 2
-
-/* Define if you have the select function. */
-#define HAVE_SELECT 1
-
-/* Define if you have the socket function. */
-#define HAVE_SOCKET 1
-
-/* Define if you have the strerror function. */
-#define HAVE_STRERROR 1
-
-/* Define if you have the strtol function. */
-#define HAVE_STRTOL 1
-
-/* Define if you have the <asm/types.h> header file. */
-#define HAVE_ASM_TYPES_H 1
-
-/* Define if you have the <fcntl.h> header file. */
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the <getopt.h> header file. */
-#define HAVE_GETOPT_H 1
-
-/* Define if you have the <linux/if_ether.h> header file. */
-#define HAVE_LINUX_IF_ETHER_H 1
-
-/* Define if you have kernel-mode PPPoE in Linux file. */
-/* #undef HAVE_LINUX_KERNEL_PPPOE */
-
-/* Define if you have the <linux/if_packet.h> header file. */
-#define HAVE_LINUX_IF_PACKET_H 1
-
-/* Define if you have the <linux/if_pppox.h> header file. */
-#define HAVE_LINUX_IF_PPPOX_H 1
-
-/* Define if you have the <net/bpf.h> header file. */
-#define HAVE_NET_BPF_H 1
-
-/* Define if you have the <net/if_arp.h> header file. */
-//#define HAVE_NET_IF_ARP_H 1
-
-/* Define if you have the <net/ethernet.h> header file. */
-#define HAVE_NET_ETHERNET_H 1
-
-/* Define if you have the <net/if.h> header file. */
-#define HAVE_NET_IF_H 1
-
-/* Define if you have the <linux/if.h> header file. */
-#define HAVE_LINUX_IF_H 1
-
-/* Define if you have the <net/if_dl.h> header file. */
-/* #undef HAVE_NET_IF_DL_H */
-
-/* Define if you have the <net/if_ether.h> header file. */
-/* #undef HAVE_NET_IF_ETHER_H */
-
-/* Define if you have the <net/if_types.h> header file. */
-/* #undef HAVE_NET_IF_TYPES_H */
-
-/* Define if you have the <netinet/if_ether.h> header file. */
-//#define HAVE_NETINET_IF_ETHER_H 1
-
-/* Define if you have the <netpacket/packet.h> header file. */
-#define HAVE_NETPACKET_PACKET_H 1
-
-/* Define if you have the <sys/cdefs.h> header file. */
-#define HAVE_SYS_CDEFS_H 1
-
-/* Define if you have the <sys/dlpi.h> header file. */
-/* #undef HAVE_SYS_DLPI_H */
-
-/* Define if you have the <sys/ioctl.h> header file. */
-#define HAVE_SYS_IOCTL_H 1
-
-/* Define if you have the <sys/param.h> header file. */
-#define HAVE_SYS_PARAM_H 1
-
-/* Define if you have the <sys/socket.h> header file. */
-#define HAVE_SYS_SOCKET_H 1
-
-/* Define if you have the <sys/time.h> header file. */
-#define HAVE_SYS_TIME_H 1
-
-/* Define if you have the <sys/uio.h> header file. */
-#define HAVE_SYS_UIO_H 1
-
-/* Define if you have the <syslog.h> header file. */
-#define HAVE_SYSLOG_H 1
-
-/* Define if you have the <unistd.h> header file. */
-#define HAVE_UNISTD_H 1
-
-/* Define if you have the N_HDLC line discipline in linux/termios.h */
-#define HAVE_N_HDLC 1
-
-/* Define if bitfields are packed in reverse order */
-#define PACK_BITFIELDS_REVERSED 1
diff --git a/mdk-stage1/rp-pppoe/src/config.h.in b/mdk-stage1/rp-pppoe/src/config.h.in
deleted file mode 100644
index e3340389d..000000000
--- a/mdk-stage1/rp-pppoe/src/config.h.in
+++ /dev/null
@@ -1,134 +0,0 @@
-/* config.h.in. Generated automatically from configure.in by autoheader. */
-
-/* Define to empty if the keyword does not work. */
-#undef const
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */
-#undef HAVE_SYS_WAIT_H
-
-/* Define to `int' if <sys/types.h> doesn't define. */
-#undef pid_t
-
-/* Define as the return type of signal handlers (int or void). */
-#undef RETSIGTYPE
-
-/* Define if the setvbuf function takes the buffering type as its second
- argument and the buffer pointer as the third, as on System V
- before release 3. */
-#undef SETVBUF_REVERSED
-
-/* Define if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Define if your <sys/time.h> declares struct tm. */
-#undef TM_IN_SYS_TIME
-
-#undef HAVE_STRUCT_SOCKADDR_LL
-
-/* The number of bytes in a unsigned int. */
-#undef SIZEOF_UNSIGNED_INT
-
-/* The number of bytes in a unsigned long. */
-#undef SIZEOF_UNSIGNED_LONG
-
-/* The number of bytes in a unsigned short. */
-#undef SIZEOF_UNSIGNED_SHORT
-
-/* Define if you have the select function. */
-#undef HAVE_SELECT
-
-/* Define if you have the socket function. */
-#undef HAVE_SOCKET
-
-/* Define if you have the strerror function. */
-#undef HAVE_STRERROR
-
-/* Define if you have the strtol function. */
-#undef HAVE_STRTOL
-
-/* Define if you have the <asm/types.h> header file. */
-#undef HAVE_ASM_TYPES_H
-
-/* Define if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define if you have the <getopt.h> header file. */
-#undef HAVE_GETOPT_H
-
-/* Define if you have the <linux/if_ether.h> header file. */
-#undef HAVE_LINUX_IF_ETHER_H
-
-/* Define if you have kernel-mode PPPoE in Linux file. */
-#undef HAVE_LINUX_KERNEL_PPPOE
-
-/* Define if you have the <linux/if_packet.h> header file. */
-#undef HAVE_LINUX_IF_PACKET_H
-
-/* Define if you have the <linux/if_pppox.h> header file. */
-#undef HAVE_LINUX_IF_PPPOX_H
-
-/* Define if you have the <net/bpf.h> header file. */
-#undef HAVE_NET_BPF_H
-
-/* Define if you have the <net/if_arp.h> header file. */
-#undef HAVE_NET_IF_ARP_H
-
-/* Define if you have the <net/ethernet.h> header file. */
-#undef HAVE_NET_ETHERNET_H
-
-/* Define if you have the <net/if.h> header file. */
-#undef HAVE_NET_IF_H
-
-/* Define if you have the <linux/if.h> header file. */
-#undef HAVE_LINUX_IF_H
-
-/* Define if you have the <net/if_dl.h> header file. */
-#undef HAVE_NET_IF_DL_H
-
-/* Define if you have the <net/if_ether.h> header file. */
-#undef HAVE_NET_IF_ETHER_H
-
-/* Define if you have the <net/if_types.h> header file. */
-#undef HAVE_NET_IF_TYPES_H
-
-/* Define if you have the <netinet/if_ether.h> header file. */
-#undef HAVE_NETINET_IF_ETHER_H
-
-/* Define if you have the <netpacket/packet.h> header file. */
-#undef HAVE_NETPACKET_PACKET_H
-
-/* Define if you have the <sys/cdefs.h> header file. */
-#undef HAVE_SYS_CDEFS_H
-
-/* Define if you have the <sys/dlpi.h> header file. */
-#undef HAVE_SYS_DLPI_H
-
-/* Define if you have the <sys/ioctl.h> header file. */
-#undef HAVE_SYS_IOCTL_H
-
-/* Define if you have the <sys/param.h> header file. */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <sys/socket.h> header file. */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define if you have the <sys/time.h> header file. */
-#undef HAVE_SYS_TIME_H
-
-/* Define if you have the <sys/uio.h> header file. */
-#undef HAVE_SYS_UIO_H
-
-/* Define if you have the <syslog.h> header file. */
-#undef HAVE_SYSLOG_H
-
-/* Define if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the N_HDLC line discipline in linux/termios.h */
-#undef HAVE_N_HDLC
-
-/* Define if bitfields are packed in reverse order */
-#undef PACK_BITFIELDS_REVERSED
diff --git a/mdk-stage1/rp-pppoe/src/configure b/mdk-stage1/rp-pppoe/src/configure
deleted file mode 100755
index eede451a1..000000000
--- a/mdk-stage1/rp-pppoe/src/configure
+++ /dev/null
@@ -1,2356 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_default_prefix=/usr
-ac_help="$ac_help
- --enable-plugin=pppd_src_path build pppd plugin"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
- case "$ac_option" in
- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) ac_optarg= ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case "$ac_option" in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir="$ac_optarg" ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build="$ac_optarg" ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file="$ac_optarg" ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
- datadir="$ac_optarg" ;;
-
- -disable-* | --disable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- eval "enable_${ac_feature}=no" ;;
-
- -enable-* | --enable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_${ac_feature}='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix="$ac_optarg" ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he)
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
- --cache-file=FILE cache test results in FILE
- --help print this message
- --no-create do not create output files
- --quiet, --silent do not print \`checking...' messages
- --version print the version of autoconf that created configure
-Directory and file names:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [same as prefix]
- --bindir=DIR user executables in DIR [EPREFIX/bin]
- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data in DIR
- [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data in DIR
- [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
- --includedir=DIR C header files in DIR [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
- --infodir=DIR info documentation in DIR [PREFIX/info]
- --mandir=DIR man documentation in DIR [PREFIX/man]
- --srcdir=DIR find the sources in DIR [configure dir or ..]
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM
- run sed PROGRAM on installed program names
-EOF
- cat << EOF
-Host type:
- --build=BUILD configure for building on BUILD [BUILD=HOST]
- --host=HOST configure for HOST [guessed]
- --target=TARGET configure for TARGET [TARGET=HOST]
-Features and packages:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-EOF
- if test -n "$ac_help"; then
- echo "--enable and --with options recognized:$ac_help"
- fi
- exit 0 ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host="$ac_optarg" ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir="$ac_optarg" ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir="$ac_optarg" ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir="$ac_optarg" ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir="$ac_optarg" ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir="$ac_optarg" ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir="$ac_optarg" ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir="$ac_optarg" ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix="$ac_optarg" ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix="$ac_optarg" ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix="$ac_optarg" ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name="$ac_optarg" ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir="$ac_optarg" ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir="$ac_optarg" ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site="$ac_optarg" ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir="$ac_optarg" ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir="$ac_optarg" ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target="$ac_optarg" ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.13"
- exit 0 ;;
-
- -with-* | --with-*)
- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
- *) ac_optarg=yes ;;
- esac
- eval "with_${ac_package}='$ac_optarg'" ;;
-
- -without-* | --without-*)
- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
- # Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval "with_${ac_package}=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes="$ac_optarg" ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries="$ac_optarg" ;;
-
- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
- ;;
-
- *)
- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
- echo "configure: warning: $ac_option: invalid host type" 1>&2
- fi
- if test "x$nonopt" != xNONE; then
- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
- fi
- nonopt="$ac_option"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
- exec 6>/dev/null
-else
- exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
- case "$ac_arg" in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c) ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
- esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=pppoe.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_prog=$0
- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
- else
- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
- fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
-fi
-for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
- echo "loading site script $ac_site_file"
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- echo "loading cache $cache_file"
- . $cache_file
-else
- echo "creating cache $cache_file"
- > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
-' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
-else
- ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:536: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:566: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_prog_rejected=no
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
- fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test -z "$CC"; then
- case "`uname -s`" in
- *win32* | *WIN32*)
- # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:617: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="cl"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
- ;;
- esac
- fi
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:649: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 660 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:691: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:696: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:705: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
-else
- ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
-else
- GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:724: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
-else
- ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-
-
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:758: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 773 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:779: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 790 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:796: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -nologo -E"
- cat > conftest.$ac_ext <<EOF
-#line 807 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
-fi
- CPP="$ac_cv_prog_CPP"
-else
- ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:838: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 843 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:851: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- ac_cv_header_stdc=yes
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 868 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
- :
-else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 886 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
- :
-else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
- :
-else
- cat > conftest.$ac_ext <<EOF
-#line 907 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
-EOF
-if { (eval echo configure:918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- :
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_header_stdc=no
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
- cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:942: checking for sys/wait.h that is POSIX.1 compatible" >&5
-if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 947 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/wait.h>
-#ifndef WEXITSTATUS
-#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
-#endif
-#ifndef WIFEXITED
-#define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
-#endif
-int main() {
-int s;
-wait (&s);
-s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
-; return 0; }
-EOF
-if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_header_sys_wait_h=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_sys_wait_h=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
-if test $ac_cv_header_sys_wait_h = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_SYS_WAIT_H 1
-EOF
-
-fi
-
-for ac_hdr in fcntl.h sys/ioctl.h sys/time.h syslog.h unistd.h net/if_arp.h netinet/if_ether.h getopt.h sys/uio.h sys/param.h fcntl.h net/bpf.h netpacket/packet.h net/ethernet.h asm/types.h linux/if_packet.h linux/if_ether.h linux/if_pppox.h sys/socket.h sys/cdefs.h linux/if.h net/if.h net/if_dl.h net/if_ether.h net/if_types.h netinet/if_ether.h net/if_types.h net/if_dl.h sys/dlpi.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:987: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 992 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1025: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1030 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this. */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this. */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this. */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in an arm
- of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1079: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_const=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
- cat >> confdefs.h <<\EOF
-#define const
-EOF
-
-fi
-
-echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:1100: checking for pid_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1105 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_type_pid_t=yes
-else
- rm -rf conftest*
- ac_cv_type_pid_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_pid_t" 1>&6
-if test $ac_cv_type_pid_t = no; then
- cat >> confdefs.h <<\EOF
-#define pid_t int
-EOF
-
-fi
-
-echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1133: checking whether time.h and sys/time.h may both be included" >&5
-if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1138 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-int main() {
-struct tm *tp;
-; return 0; }
-EOF
-if { (eval echo configure:1147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_header_time=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_time=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_time" 1>&6
-if test $ac_cv_header_time = yes; then
- cat >> confdefs.h <<\EOF
-#define TIME_WITH_SYS_TIME 1
-EOF
-
-fi
-
-echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:1168: checking whether struct tm is in sys/time.h or time.h" >&5
-if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1173 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <time.h>
-int main() {
-struct tm *tp; tp->tm_sec;
-; return 0; }
-EOF
-if { (eval echo configure:1181: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_struct_tm=time.h
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_struct_tm=sys/time.h
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_struct_tm" 1>&6
-if test $ac_cv_struct_tm = sys/time.h; then
- cat >> confdefs.h <<\EOF
-#define TM_IN_SYS_TIME 1
-EOF
-
-fi
-
-
-# Extract the first word of "echo", so it can be a program name with args.
-set dummy echo; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1205: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_ECHO'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$ECHO" in
- /*)
- ac_cv_path_ECHO="$ECHO" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_ECHO="$ECHO" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="/usr/ucb/bin:$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_ECHO="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_ECHO" && ac_cv_path_ECHO=""""
- ;;
-esac
-fi
-ECHO="$ac_cv_path_ECHO"
-if test -n "$ECHO"; then
- echo "$ac_t""$ECHO" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-$ECHO -n "checking for struct sockaddr_ll... "
-cat > conftest.$ac_ext <<EOF
-#line 1241 "configure"
-#include "confdefs.h"
-#include <asm/types.h>
-#include <linux/if_packet.h>
-#include <linux/if_ether.h>
-
-int main() {
-struct sockaddr_ll sa;
-; return 0; }
-EOF
-if { (eval echo configure:1251: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_struct_sockaddr_ll=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_struct_sockaddr_ll=no
-fi
-rm -f conftest*
-$ECHO $ac_cv_struct_sockaddr_ll
-if test "$ac_cv_struct_sockaddr_ll" = yes ; then
-cat >> confdefs.h <<\EOF
-#define HAVE_STRUCT_SOCKADDR_LL 1
-EOF
-
-fi
-
-$ECHO -n "checking for N_HDLC line discipline... "
-cat > conftest.$ac_ext <<EOF
-#line 1271 "configure"
-#include "confdefs.h"
-#include <linux/termios.h>
-int main() {
-int x = N_HDLC;
-; return 0; }
-EOF
-if { (eval echo configure:1278: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_n_hdlc=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_n_hdlc=no
-fi
-rm -f conftest*
-$ECHO $ac_cv_n_hdlc
-if test "$ac_cv_n_hdlc" = yes ; then
-cat >> confdefs.h <<\EOF
-#define HAVE_N_HDLC 1
-EOF
-
-fi
-
-# Check whether --enable-plugin or --disable-plugin was given.
-if test "${enable_plugin+set}" = set; then
- enableval="$enable_plugin"
- ac_cv_pluginpath=$enableval
-else
- ac_cv_pluginpath=no
-fi
-
-
-LINUX_KERNELMODE_PLUGIN=""
-PPPD_INCDIR=""
-if test "$ac_cv_header_linux_if_pppox_h" = yes ; then
- if test "$ac_cv_pluginpath" != no ; then
- LINUX_KERNELMODE_PLUGIN=rp-pppoe.so
- PPPD_INCDIR=$ac_cv_pluginpath
- fi
-fi
-
-
-
-
-PPPOE_RELAY=""
-if test "`uname -s`" = "Linux" ; then
- PPPOE_RELAY=pppoe-relay
-fi
-
-
-echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6
-echo "configure:1324: checking for 8-bit clean memcmp" >&5
-if eval "test \"`echo '$''{'ac_cv_func_memcmp_clean'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_memcmp_clean=no
-else
- cat > conftest.$ac_ext <<EOF
-#line 1332 "configure"
-#include "confdefs.h"
-
-main()
-{
- char c0 = 0x40, c1 = 0x80, c2 = 0x81;
- exit(memcmp(&c0, &c2, 1) < 0 && memcmp(&c1, &c2, 1) < 0 ? 0 : 1);
-}
-
-EOF
-if { (eval echo configure:1342: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_func_memcmp_clean=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_func_memcmp_clean=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$ac_cv_func_memcmp_clean" 1>&6
-test $ac_cv_func_memcmp_clean = no && LIBOBJS="$LIBOBJS memcmp.${ac_objext}"
-
-echo $ac_n "checking whether setvbuf arguments are reversed""... $ac_c" 1>&6
-echo "configure:1360: checking whether setvbuf arguments are reversed" >&5
-if eval "test \"`echo '$''{'ac_cv_func_setvbuf_reversed'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
- cat > conftest.$ac_ext <<EOF
-#line 1368 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-/* If setvbuf has the reversed format, exit 0. */
-main () {
- /* This call has the arguments reversed.
- A reversed system may check and see that the address of main
- is not _IOLBF, _IONBF, or _IOFBF, and return nonzero. */
- if (setvbuf(stdout, _IOLBF, (char *) main, BUFSIZ) != 0)
- exit(1);
- putc('\r', stdout);
- exit(0); /* Non-reversed systems segv here. */
-}
-EOF
-if { (eval echo configure:1382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_func_setvbuf_reversed=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_func_setvbuf_reversed=no
-fi
-rm -fr conftest*
-fi
-
-rm -f core core.* *.core
-fi
-
-echo "$ac_t""$ac_cv_func_setvbuf_reversed" 1>&6
-if test $ac_cv_func_setvbuf_reversed = yes; then
- cat >> confdefs.h <<\EOF
-#define SETVBUF_REVERSED 1
-EOF
-
-fi
-
-echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1406: checking return type of signal handlers" >&5
-if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1411 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <signal.h>
-#ifdef signal
-#undef signal
-#endif
-#ifdef __cplusplus
-extern "C" void (*signal (int, void (*)(int)))(int);
-#else
-void (*signal ()) ();
-#endif
-
-int main() {
-int i;
-; return 0; }
-EOF
-if { (eval echo configure:1428: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_type_signal=void
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_type_signal=int
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_type_signal" 1>&6
-cat >> confdefs.h <<EOF
-#define RETSIGTYPE $ac_cv_type_signal
-EOF
-
-
-for ac_func in select socket strerror strtol
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1449: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1454 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:1477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1532: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking size of unsigned short""... $ac_c" 1>&6
-echo "configure:1586: checking size of unsigned short" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_short'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
- cat > conftest.$ac_ext <<EOF
-#line 1594 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(unsigned short));
- exit(0);
-}
-EOF
-if { (eval echo configure:1605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_unsigned_short=`cat conftestval`
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_unsigned_short=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_unsigned_short" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_UNSIGNED_SHORT $ac_cv_sizeof_unsigned_short
-EOF
-
-
-echo $ac_n "checking size of unsigned int""... $ac_c" 1>&6
-echo "configure:1625: checking size of unsigned int" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_int'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
- cat > conftest.$ac_ext <<EOF
-#line 1633 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(unsigned int));
- exit(0);
-}
-EOF
-if { (eval echo configure:1644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_unsigned_int=`cat conftestval`
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_unsigned_int=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_unsigned_int" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_UNSIGNED_INT $ac_cv_sizeof_unsigned_int
-EOF
-
-
-echo $ac_n "checking size of unsigned long""... $ac_c" 1>&6
-echo "configure:1664: checking size of unsigned long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
- cat > conftest.$ac_ext <<EOF
-#line 1672 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
-{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(unsigned long));
- exit(0);
-}
-EOF
-if { (eval echo configure:1683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_unsigned_long=`cat conftestval`
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_unsigned_long=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_unsigned_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long
-EOF
-
-
-
-# Extract the first word of "pppd", so it can be a program name with args.
-set dummy pppd; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1706: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_PPPD'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$PPPD" in
- /*)
- ac_cv_path_PPPD="$PPPD" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_PPPD="$PPPD" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_PPPD="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_PPPD" && ac_cv_path_PPPD="NOTFOUND"
- ;;
-esac
-fi
-PPPD="$ac_cv_path_PPPD"
-if test -n "$PPPD"; then
- echo "$ac_t""$PPPD" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-# Extract the first word of "setsid", so it can be a program name with args.
-set dummy setsid; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1743: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_SETSID'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$SETSID" in
- /*)
- ac_cv_path_SETSID="$SETSID" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_SETSID="$SETSID" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_SETSID="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_SETSID" && ac_cv_path_SETSID=""""
- ;;
-esac
-fi
-SETSID="$ac_cv_path_SETSID"
-if test -n "$SETSID"; then
- echo "$ac_t""$SETSID" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-# Extract the first word of "id", so it can be a program name with args.
-set dummy id; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1780: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_ID'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$ID" in
- /*)
- ac_cv_path_ID="$ID" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_ID="$ID" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="/usr/xpg4/bin:$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_ID="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_ID" && ac_cv_path_ID=""""
- ;;
-esac
-fi
-ID="$ac_cv_path_ID"
-if test -n "$ID"; then
- echo "$ac_t""$ID" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-$ECHO -n "checking for Linux 2.4.X kernel-mode PPPoE support..."
-if test "`uname -s`" = "Linux" ; then
-if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
- cat > conftest.$ac_ext <<EOF
-#line 1820 "configure"
-#include "confdefs.h"
-#include <sys/socket.h>
-#include <net/ethernet.h>
-#include <linux/if.h>
-#include <linux/if_pppox.h>
-int main()
-{
- if (socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OE) >= 0) return 0; else return 1;
-}
-
-EOF
-if { (eval echo configure:1832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_linux_kernel_pppoe=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_linux_kernel_pppoe=no
-fi
-rm -fr conftest*
-fi
-
-else
- ac_cv_linux_kernel_pppoe=no
-fi
-
-$ECHO $ac_cv_linux_kernel_pppoe
-if test "$ac_cv_linux_kernel_pppoe" = yes ; then
- cat >> confdefs.h <<\EOF
-#define HAVE_LINUX_KERNEL_PPPOE 1
-EOF
-
-fi
-
-if test "$GCC" = yes; then
- CFLAGS="$CFLAGS -Wall -Wstrict-prototypes -ansi -pedantic"
-fi
-
-if test "$PPPD" = "NOTFOUND"; then
- $ECHO ""
- $ECHO "*** Oops! I couldn't find pppd, the PPP daemon anywhere."
- $ECHO "*** You must install pppd, version 2.3.10 or later."
- $ECHO "*** I will keep going, but it may not work."
- $ECHO ""
-fi
-
-
-PPPD_VERSION=`$PPPD --version 2>&1 | awk '{print $NF}'`
-
-case "$PPPD_VERSION" in
-1.*|2.0.*|2.1.*|2.2.*|2.3.0|2.3.1|2.3.2|2.3.3|2.3.4|2.3.5|2.3.6)
- $ECHO ""
- $ECHO "*** Oops! Your version of pppd is $PPPD_VERSION, which is too old."
- $ECHO "*** You need at least 2.3.7 (2.3.10 or newer recommended.)"
- $ECHO "*** I will keep going, but it may not work."
- $ECHO ""
- ;;
-
-2.3.7|2.3.8|2.3.9)
- $ECHO ""
- $ECHO "*** Warning. Your version of pppd is $PPPD_VERSION. You will"
- $ECHO "*** not be able to use connect-on-demand. Upgrade to pppd"
- $ECHO "*** 2.3.10 or newer if you need connect-on-demand."
- $ECHO ""
- ;;
-
-2*|3*|4*|5*|6*|7*|8*|9*)
- ;;
-
-*)
- $ECHO ""
- $ECHO "*** Oops. I cannot figure out what version of pppd you have."
- $ECHO "*** All I got back was '$PPPD_VERSION'"
- $ECHO "*** I will keep going, but it may not work."
- $ECHO ""
- ;;
-esac
-
-$ECHO -n "checking packing order of bit fields... "
-if test "$cross_compiling" = yes; then
- { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
- cat > conftest.$ac_ext <<EOF
-#line 1905 "configure"
-#include "confdefs.h"
-
-union foo {
- struct bar {
- unsigned int ver:4;
- unsigned int type:4;
- } bb;
- unsigned char baz;
-};
-
-int
-main(void)
-{
- union foo x;
- x.bb.ver = 1;
- x.bb.type = 2;
- if (x.baz == 0x21) {
- return 1;
- } else if (x.baz == 0x12) {
- return 0;
- } else {
- return 2;
- }
-}
-EOF
-if { (eval echo configure:1931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- PACK=normal
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- PACK=rev
-fi
-rm -fr conftest*
-fi
-
-
-if test "$PACK" = "rev" ; then
- $ECHO "reversed"
- cat >> confdefs.h <<\EOF
-#define PACK_BITFIELDS_REVERSED 1
-EOF
-
-else
- $ECHO "normal"
-fi
-
-# Sigh... got to fix this up for tcl
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Fully resolve WRAPPER for Tcl script.
-WRAPPER=${sbindir}/pppoe-wrapper
-eval "WRAPPER=${WRAPPER}"
-eval "WRAPPER=${WRAPPER}"
-
-
-# Determine what targets to build
-TARGETS="pppoe pppoe-server"
-
-# pppoe-sniff is built only on Linux and Solaris
-if test "$ac_cv_header_linux_if_packet_h" = "yes" -o "$ac_cv_header_sys_dlpi_h" = "yes" ; then
- TARGETS="$TARGETS pppoe-sniff"
-fi
-
-# pppoe-relay is built only on Linux
-if test "$ac_cv_header_linux_if_packet_h" = "yes" ; then
- TARGETS="$TARGETS pppoe-relay"
-fi
-
-# plugin is built only if we have kernel support
-if test -n "$LINUX_KERNELMODE_PLUGIN" ; then
- TARGETS="$TARGETS $LINUX_KERNELMODE_PLUGIN"
-fi
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
- case "\$ac_option" in
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.13"
- exit 0 ;;
- -help | --help | --hel | --he | --h)
- echo "\$ac_cs_usage"; exit 0 ;;
- *) echo "\$ac_cs_usage"; exit 1 ;;
- esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux ../scripts/adsl-setup ../gui/Makefile ../gui/tkpppoe config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@CC@%$CC%g
-s%@CPP@%$CPP%g
-s%@ECHO@%$ECHO%g
-s%@LINUX_KERNELMODE_PLUGIN@%$LINUX_KERNELMODE_PLUGIN%g
-s%@PPPD_INCDIR@%$PPPD_INCDIR%g
-s%@PPPOE_RELAY@%$PPPOE_RELAY%g
-s%@LIBOBJS@%$LIBOBJS%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PPPD@%$PPPD%g
-s%@SETSID@%$SETSID%g
-s%@ID@%$ID%g
-s%@WRAPPER@%$WRAPPER%g
-s%@TARGETS@%$TARGETS%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
- fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
- fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux ../scripts/adsl-setup ../gui/Makefile ../gui/tkpppoe"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
- esac
-
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dir_suffix.
- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
- else
- ac_dir_suffix= ac_dots=
- fi
-
- case "$ac_given_srcdir" in
- .) srcdir=.
- if test -z "$ac_dots"; then top_srcdir=.
- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
- *) # Relative path.
- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
- top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
-
- case "$ac_given_INSTALL" in
- [/$]*) INSTALL="$ac_given_INSTALL" ;;
- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
- esac
-
- echo creating "$ac_file"
- rm -f "$ac_file"
- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
- case "$ac_file" in
- *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
- *) ac_comsub= ;;
- esac
-
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='\([ ]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
- esac
-
- echo creating $ac_file
-
- rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h. And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments. This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
- ac_lines=`grep -c . conftest.vals`
- # grep -c gives empty output for an empty file on some AIX systems.
- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
- # Write a limited-size here document to conftest.frag.
- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
- echo 'CEOF
- sed -f conftest.frag conftest.in > conftest.out
- rm -f conftest.in
- mv conftest.out conftest.in
-' >> $CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
- rm -f conftest.vals
- mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
- rm -f conftest.frag conftest.h
- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
- cat conftest.in >> conftest.h
- rm -f conftest.in
- if cmp -s $ac_file conftest.h 2>/dev/null; then
- echo "$ac_file is unchanged"
- rm -f conftest.h
- else
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- fi
- rm -f $ac_file
- mv conftest.h $ac_file
- fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-
-$ECHO ""
-$ECHO "On this platform, the following targets will be built:"
-$ECHO " $TARGETS"
-$ECHO ""
-$ECHO "Type 'make' to compile the software."
diff --git a/mdk-stage1/rp-pppoe/src/configure.in b/mdk-stage1/rp-pppoe/src/configure.in
deleted file mode 100644
index c11690179..000000000
--- a/mdk-stage1/rp-pppoe/src/configure.in
+++ /dev/null
@@ -1,231 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-AC_INIT(pppoe.c)
-
-AC_CONFIG_HEADER(config.h)
-
-AC_PREFIX_DEFAULT(/usr)
-
-dnl Checks for programs.
-AC_PROG_CC
-
-dnl Checks for libraries.
-
-dnl Checks for header files.
-AC_HEADER_STDC
-AC_HEADER_SYS_WAIT
-AC_CHECK_HEADERS(fcntl.h sys/ioctl.h sys/time.h syslog.h unistd.h net/if_arp.h netinet/if_ether.h getopt.h sys/uio.h sys/param.h fcntl.h net/bpf.h netpacket/packet.h net/ethernet.h asm/types.h linux/if_packet.h linux/if_ether.h linux/if_pppox.h sys/socket.h sys/cdefs.h linux/if.h net/if.h net/if_dl.h net/if_ether.h net/if_types.h netinet/if_ether.h net/if_types.h net/if_dl.h sys/dlpi.h )
-
-dnl Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-AC_TYPE_PID_T
-AC_HEADER_TIME
-AC_STRUCT_TM
-
-dnl Check for an echo which supports -n -- another hack for Solaris
-AC_PATH_PROG(ECHO, echo, "", /usr/ucb/bin:$PATH)
-
-dnl Check for sockaddr_ll
-$ECHO -n "checking for struct sockaddr_ll... "
-AC_TRY_COMPILE([#include <asm/types.h>
-#include <linux/if_packet.h>
-#include <linux/if_ether.h>
-], [struct sockaddr_ll sa;],
-ac_cv_struct_sockaddr_ll=yes, ac_cv_struct_sockaddr_ll=no)
-$ECHO $ac_cv_struct_sockaddr_ll
-if test "$ac_cv_struct_sockaddr_ll" = yes ; then
-AC_DEFINE(HAVE_STRUCT_SOCKADDR_LL)
-fi
-
-dnl Check for N_HDLC line discipline
-$ECHO -n "checking for N_HDLC line discipline... "
-AC_TRY_COMPILE([#include <linux/termios.h>],
- [int x = N_HDLC;],
- ac_cv_n_hdlc=yes, ac_cv_n_hdlc=no)
-$ECHO $ac_cv_n_hdlc
-if test "$ac_cv_n_hdlc" = yes ; then
-AC_DEFINE(HAVE_N_HDLC)
-fi
-
-AC_ARG_ENABLE(plugin, [ --enable-plugin=pppd_src_path build pppd plugin], ac_cv_pluginpath=$enableval, ac_cv_pluginpath=no)
-
-dnl Determine whether or not to build Linux pppd plugin
-LINUX_KERNELMODE_PLUGIN=""
-PPPD_INCDIR=""
-if test "$ac_cv_header_linux_if_pppox_h" = yes ; then
- if test "$ac_cv_pluginpath" != no ; then
- LINUX_KERNELMODE_PLUGIN=rp-pppoe.so
- PPPD_INCDIR=$ac_cv_pluginpath
- fi
-fi
-
-AC_SUBST(LINUX_KERNELMODE_PLUGIN)
-AC_SUBST(PPPD_INCDIR)
-
-dnl Determine whether or not to build PPPoE relay
-PPPOE_RELAY=""
-if test "`uname -s`" = "Linux" ; then
- PPPOE_RELAY=pppoe-relay
-fi
-AC_SUBST(PPPOE_RELAY)
-
-dnl Checks for library functions.
-AC_FUNC_MEMCMP
-AC_FUNC_SETVBUF_REVERSED
-AC_TYPE_SIGNAL
-AC_CHECK_FUNCS(select socket strerror strtol)
-AC_PROG_INSTALL
-
-dnl Integer sizes
-AC_CHECK_SIZEOF(unsigned short)
-AC_CHECK_SIZEOF(unsigned int)
-AC_CHECK_SIZEOF(unsigned long)
-
-dnl Check for location of pppd
-AC_PATH_PROG(PPPD, pppd, NOTFOUND, $PATH:/sbin:/usr/sbin:/usr/local/sbin)
-
-dnl Check for setsid (probably Linux-specific)
-AC_PATH_PROG(SETSID, setsid, "", $PATH:/sbin:/usr/sbin:/usr/local/sbin)
-
-dnl Check for an "id" which accepts "-u" option -- hack for Solaris.
-AC_PATH_PROG(ID, id, "", /usr/xpg4/bin:$PATH)
-
-dnl Check for Linux-specific kernel support for PPPoE
-$ECHO -n "checking for Linux 2.4.X kernel-mode PPPoE support..."
-if test "`uname -s`" = "Linux" ; then
-AC_TRY_RUN([#include <sys/socket.h>
-#include <net/ethernet.h>
-#include <linux/if.h>
-#include <linux/if_pppox.h>
-int main()
-{
- if (socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OE) >= 0) return 0; else return 1;
-}
-], ac_cv_linux_kernel_pppoe=yes, ac_cv_linux_kernel_pppoe=no)
-else
- ac_cv_linux_kernel_pppoe=no
-fi
-
-$ECHO $ac_cv_linux_kernel_pppoe
-if test "$ac_cv_linux_kernel_pppoe" = yes ; then
- AC_DEFINE(HAVE_LINUX_KERNEL_PPPOE)
-fi
-
-dnl GCC warning level
-if test "$GCC" = yes; then
- CFLAGS="$CFLAGS -Wall -Wstrict-prototypes"
-fi
-
-dnl If we couldn't find pppd, die
-if test "$PPPD" = "NOTFOUND"; then
- $ECHO ""
- $ECHO "*** Oops! I couldn't find pppd, the PPP daemon anywhere."
- $ECHO "*** You must install pppd, version 2.3.10 or later."
- $ECHO "*** I will keep going, but it may not work."
- $ECHO ""
-fi
-
-dnl Figure out pppd version. 2.3.7 to 2.3.9 -- issue warning. Less than
-dnl 2.3.7 -- stop
-
-PPPD_VERSION=`$PPPD --version 2>&1 | awk '{print $NF}'`
-
-case "$PPPD_VERSION" in
-1.*|2.0.*|2.1.*|2.2.*|2.3.0|2.3.1|2.3.2|2.3.3|2.3.4|2.3.5|2.3.6)
- $ECHO ""
- $ECHO "*** Oops! Your version of pppd is $PPPD_VERSION, which is too old."
- $ECHO "*** You need at least 2.3.7 (2.3.10 or newer recommended.)"
- $ECHO "*** I will keep going, but it may not work."
- $ECHO ""
- ;;
-
-2.3.7|2.3.8|2.3.9)
- $ECHO ""
- $ECHO "*** Warning. Your version of pppd is $PPPD_VERSION. You will"
- $ECHO "*** not be able to use connect-on-demand. Upgrade to pppd"
- $ECHO "*** 2.3.10 or newer if you need connect-on-demand."
- $ECHO ""
- ;;
-
-2*|3*|4*|5*|6*|7*|8*|9*)
- ;;
-
-*)
- $ECHO ""
- $ECHO "*** Oops. I cannot figure out what version of pppd you have."
- $ECHO "*** All I got back was '$PPPD_VERSION'"
- $ECHO "*** I will keep going, but it may not work."
- $ECHO ""
- ;;
-esac
-
-dnl Figure out packing order of structures
-$ECHO -n "checking packing order of bit fields... "
-AC_TRY_RUN([
-union foo {
- struct bar {
- unsigned int ver:4;
- unsigned int type:4;
- } bb;
- unsigned char baz;
-};
-
-int
-main(void)
-{
- union foo x;
- x.bb.ver = 1;
- x.bb.type = 2;
- if (x.baz == 0x21) {
- return 1;
- } else if (x.baz == 0x12) {
- return 0;
- } else {
- return 2;
- }
-}], PACK=normal, PACK=rev)
-
-if test "$PACK" = "rev" ; then
- $ECHO "reversed"
- AC_DEFINE(PACK_BITFIELDS_REVERSED)
-else
- $ECHO "normal"
-fi
-
-# Sigh... got to fix this up for tcl
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Fully resolve WRAPPER for Tcl script.
-WRAPPER=${sbindir}/pppoe-wrapper
-eval "WRAPPER=${WRAPPER}"
-eval "WRAPPER=${WRAPPER}"
-AC_SUBST(WRAPPER)
-
-# Determine what targets to build
-TARGETS="pppoe pppoe-server"
-
-# pppoe-sniff is built only on Linux and Solaris
-if test "$ac_cv_header_linux_if_packet_h" = "yes" -o "$ac_cv_header_sys_dlpi_h" = "yes" ; then
- TARGETS="$TARGETS pppoe-sniff"
-fi
-
-# pppoe-relay is built only on Linux
-if test "$ac_cv_header_linux_if_packet_h" = "yes" ; then
- TARGETS="$TARGETS pppoe-relay"
-fi
-
-# plugin is built only if we have kernel support
-if test -n "$LINUX_KERNELMODE_PLUGIN" ; then
- TARGETS="$TARGETS $LINUX_KERNELMODE_PLUGIN"
-fi
-
-AC_SUBST(TARGETS)
-
-AC_OUTPUT(Makefile ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux ../scripts/adsl-setup ../gui/Makefile ../gui/tkpppoe)
-
-$ECHO ""
-$ECHO "On this platform, the following targets will be built:"
-$ECHO " $TARGETS"
-$ECHO ""
-$ECHO "Type 'make' to compile the software."
diff --git a/mdk-stage1/rp-pppoe/src/debug.c b/mdk-stage1/rp-pppoe/src/debug.c
deleted file mode 100644
index 052dca6c7..000000000
--- a/mdk-stage1/rp-pppoe/src/debug.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/***********************************************************************
-*
-* debug.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Functions for printing debugging information
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-#include <sys/time.h>
-#include <time.h>
-#include <unistd.h>
-#include <ctype.h>
-
-/**********************************************************************
-*%FUNCTION: dumpHex
-*%ARGUMENTS:
-* fp -- file to dump to
-* buf -- buffer to dump
-* len -- length of data
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Dumps buffer to fp in an easy-to-read format
-***********************************************************************/
-void
-dumpHex(FILE *fp, unsigned char const *buf, int len)
-{
- int i;
- int base;
-
- if (!fp) return;
-
- /* do NOT dump PAP packets */
- if (len >= 2 && buf[0] == 0xC0 && buf[1] == 0x23) {
- fprintf(fp, "(PAP Authentication Frame -- Contents not dumped)\n");
- return;
- }
-
- for (base=0; base<len; base += 16) {
- for (i=base; i<base+16; i++) {
- if (i < len) {
- fprintf(fp, "%02x ", (unsigned) buf[i]);
- } else {
- fprintf(fp, " ");
- }
- }
- fprintf(fp, " ");
- for (i=base; i<base+16; i++) {
- if (i < len) {
- if (isprint(buf[i])) {
- fprintf(fp, "%c", buf[i]);
- } else {
- fprintf(fp, ".");
- }
- } else {
- break;
- }
- }
- fprintf(fp, "\n");
- }
-}
-
-/**********************************************************************
-*%FUNCTION: dumpPacket
-*%ARGUMENTS:
-* fp -- file to dump to
-* packet -- a PPPoE packet
-* dir -- either SENT or RCVD
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Dumps the PPPoE packet to fp in an easy-to-read format
-***********************************************************************/
-void
-dumpPacket(FILE *fp, PPPoEPacket *packet, char const *dir)
-{
- int len = ntohs(packet->length);
-
- /* Sheesh... printing times is a pain... */
- struct timeval tv;
- time_t now;
- int millisec;
- struct tm *lt;
- char timebuf[256];
-
- UINT16_t type = etherType(packet);
- if (!fp) return;
- gettimeofday(&tv, NULL);
- now = (time_t) tv.tv_sec;
- millisec = tv.tv_usec / 1000;
- lt = localtime(&now);
- strftime(timebuf, 256, "%H:%M:%S", lt);
- fprintf(fp, "%s.%03d %s PPPoE ", timebuf, millisec, dir);
- if (type == Eth_PPPOE_Discovery) {
- fprintf(fp, "Discovery (%x) ", (unsigned) type);
- } else if (type == Eth_PPPOE_Session) {
- fprintf(fp, "Session (%x) ", (unsigned) type);
- } else {
- fprintf(fp, "Unknown (%x) ", (unsigned) type);
- }
-
- switch(packet->code) {
- case CODE_PADI: fprintf(fp, "PADI "); break;
- case CODE_PADO: fprintf(fp, "PADO "); break;
- case CODE_PADR: fprintf(fp, "PADR "); break;
- case CODE_PADS: fprintf(fp, "PADS "); break;
- case CODE_PADT: fprintf(fp, "PADT "); break;
- case CODE_SESS: fprintf(fp, "SESS "); break;
- }
-
- fprintf(fp, "sess-id %d length %d\n",
- (int) ntohs(packet->session),
- len);
-
- /* Ugly... I apologize... */
- fprintf(fp,
- "SourceAddr %02x:%02x:%02x:%02x:%02x:%02x "
- "DestAddr %02x:%02x:%02x:%02x:%02x:%02x\n",
- (unsigned) packet->ethHdr.h_source[0],
- (unsigned) packet->ethHdr.h_source[1],
- (unsigned) packet->ethHdr.h_source[2],
- (unsigned) packet->ethHdr.h_source[3],
- (unsigned) packet->ethHdr.h_source[4],
- (unsigned) packet->ethHdr.h_source[5],
- (unsigned) packet->ethHdr.h_dest[0],
- (unsigned) packet->ethHdr.h_dest[1],
- (unsigned) packet->ethHdr.h_dest[2],
- (unsigned) packet->ethHdr.h_dest[3],
- (unsigned) packet->ethHdr.h_dest[4],
- (unsigned) packet->ethHdr.h_dest[5]);
- dumpHex(fp, packet->payload, ntohs(packet->length));
-}
diff --git a/mdk-stage1/rp-pppoe/src/discovery.c b/mdk-stage1/rp-pppoe/src/discovery.c
deleted file mode 100644
index fc3568db5..000000000
--- a/mdk-stage1/rp-pppoe/src/discovery.c
+++ /dev/null
@@ -1,629 +0,0 @@
-/***********************************************************************
-*
-* discovery.c
-*
-* Perform PPPoE discovery
-*
-* Copyright (C) 1999 by Roaring Penguin Software Inc.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef USE_LINUX_PACKET
-#include <sys/ioctl.h>
-#include <fcntl.h>
-#endif
-
-#include <signal.h>
-
-/**********************************************************************
-*%FUNCTION: parseForHostUniq
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data.
-* extra -- user-supplied pointer. This is assumed to be a pointer to int.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* If a HostUnique tag is found which matches our PID, sets *extra to 1.
-***********************************************************************/
-void
-parseForHostUniq(UINT16_t type, UINT16_t len, unsigned char *data,
- void *extra)
-{
- int *val = (int *) extra;
- if (type == TAG_HOST_UNIQ && len == sizeof(pid_t)) {
- pid_t tmp;
- memcpy(&tmp, data, len);
- if (tmp == getpid()) {
- *val = 1;
- }
- }
-}
-
-/**********************************************************************
-*%FUNCTION: packetIsForMe
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* packet -- a received PPPoE packet
-*%RETURNS:
-* 1 if packet is for this PPPoE daemon; 0 otherwise.
-*%DESCRIPTION:
-* If we are using the Host-Unique tag, verifies that packet contains
-* our unique identifier.
-***********************************************************************/
-int
-packetIsForMe(PPPoEConnection *conn, PPPoEPacket *packet)
-{
- int forMe = 0;
-
- /* If we're not using the Host-Unique tag, then accept the packet */
- if (!conn->useHostUniq) return 1;
-
- parsePacket(packet, parseForHostUniq, &forMe);
- return forMe;
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADOTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data. Should point to a PacketCriteria structure
-* which gets filled in according to selected AC name and service
-* name.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADO packet
-***********************************************************************/
-void
-parsePADOTags(UINT16_t type, UINT16_t len, unsigned char *data,
- void *extra)
-{
- struct PacketCriteria *pc = (struct PacketCriteria *) extra;
- PPPoEConnection *conn = pc->conn;
- int i;
-
- switch(type) {
- case TAG_AC_NAME:
- if (conn->printACNames) {
- printf("Access-Concentrator: %.*s\n", (int) len, data);
- }
- if (conn->acName && len == strlen(conn->acName) &&
- !strncmp((char *) data, conn->acName, len)) {
- pc->acNameOK = 1;
- }
- break;
- case TAG_SERVICE_NAME:
- if (conn->printACNames && len > 0) {
- printf(" Service-Name: %.*s\n", (int) len, data);
- }
- if (conn->serviceName && len == strlen(conn->serviceName) &&
- !strncmp((char *) data, conn->serviceName, len)) {
- pc->serviceNameOK = 1;
- }
- break;
- case TAG_AC_COOKIE:
- if (conn->printACNames) {
- printf("Got a cookie:");
- /* Print first 20 bytes of cookie */
- for (i=0; i<len && i < 20; i++) {
- printf(" %02x", (unsigned) data[i]);
- }
- if (i < len) printf("...");
- printf("\n");
- }
- conn->cookie.type = htons(type);
- conn->cookie.length = htons(len);
- memcpy(conn->cookie.payload, data, len);
- break;
- case TAG_RELAY_SESSION_ID:
- if (conn->printACNames) {
- printf("Got a Relay-ID:");
- /* Print first 20 bytes of relay ID */
- for (i=0; i<len && i < 20; i++) {
- printf(" %02x", (unsigned) data[i]);
- }
- if (i < len) printf("...");
- printf("\n");
- }
- conn->relayId.type = htons(type);
- conn->relayId.length = htons(len);
- memcpy(conn->relayId.payload, data, len);
- break;
- case TAG_SERVICE_NAME_ERROR:
- if (conn->printACNames) {
- printf("Got a Service-Name-Error tag: %.*s\n", (int) len, data);
- } else {
- syslog(LOG_ERR, "PADO: Service-Name-Error: %.*s", (int) len, data);
- exit(1);
- }
- break;
- case TAG_AC_SYSTEM_ERROR:
- if (conn->printACNames) {
- printf("Got a System-Error tag: %.*s\n", (int) len, data);
- } else {
- syslog(LOG_ERR, "PADO: System-Error: %.*s", (int) len, data);
- exit(1);
- }
- break;
- case TAG_GENERIC_ERROR:
- if (conn->printACNames) {
- printf("Got a Generic-Error tag: %.*s\n", (int) len, data);
- } else {
- syslog(LOG_ERR, "PADO: Generic-Error: %.*s", (int) len, data);
- exit(1);
- }
- break;
- }
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADSTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data (pointer to PPPoEConnection structure)
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADS packet
-***********************************************************************/
-void
-parsePADSTags(UINT16_t type, UINT16_t len, unsigned char *data,
- void *extra)
-{
- PPPoEConnection *conn = (PPPoEConnection *) extra;
- switch(type) {
- case TAG_SERVICE_NAME:
- syslog(LOG_DEBUG, "PADS: Service-Name: '%.*s'", (int) len, data);
- break;
- case TAG_SERVICE_NAME_ERROR:
- syslog(LOG_ERR, "PADS: Service-Name-Error: %.*s", (int) len, data);
- fprintf(stderr, "PADS: Service-Name-Error: %.*s\n", (int) len, data);
- exit(1);
- case TAG_AC_SYSTEM_ERROR:
- syslog(LOG_ERR, "PADS: System-Error: %.*s", (int) len, data);
- fprintf(stderr, "PADS: System-Error: %.*s\n", (int) len, data);
- exit(1);
- case TAG_GENERIC_ERROR:
- syslog(LOG_ERR, "PADS: Generic-Error: %.*s", (int) len, data);
- fprintf(stderr, "PADS: Generic-Error: %.*s\n", (int) len, data);
- exit(1);
- case TAG_RELAY_SESSION_ID:
- conn->relayId.type = htons(type);
- conn->relayId.length = htons(len);
- memcpy(conn->relayId.payload, data, len);
- break;
- }
-}
-
-/***********************************************************************
-*%FUNCTION: sendPADI
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADI packet
-***********************************************************************/
-void
-sendPADI(PPPoEConnection *conn)
-{
- PPPoEPacket packet;
- unsigned char *cursor = packet.payload;
- PPPoETag *svc = (PPPoETag *) (&packet.payload);
- UINT16_t namelen = 0;
- UINT16_t plen;
-
- if (conn->serviceName) {
- namelen = (UINT16_t) strlen(conn->serviceName);
- }
- plen = TAG_HDR_SIZE + namelen;
- CHECK_ROOM(cursor, packet.payload, plen);
-
- /* Set destination to Ethernet broadcast address */
- memset(packet.ethHdr.h_dest, 0xFF, ETH_ALEN);
- memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-
- packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
- packet.ver = 1;
- packet.type = 1;
- packet.code = CODE_PADI;
- packet.session = 0;
-
- svc->type = TAG_SERVICE_NAME;
- svc->length = htons(namelen);
- CHECK_ROOM(cursor, packet.payload, namelen+TAG_HDR_SIZE);
-
- if (conn->serviceName) {
- memcpy(svc->payload, conn->serviceName, strlen(conn->serviceName));
- }
- cursor += namelen + TAG_HDR_SIZE;
-
- /* If we're using Host-Uniq, copy it over */
- if (conn->useHostUniq) {
- PPPoETag hostUniq;
- pid_t pid = getpid();
- hostUniq.type = htons(TAG_HOST_UNIQ);
- hostUniq.length = htons(sizeof(pid));
- memcpy(hostUniq.payload, &pid, sizeof(pid));
- CHECK_ROOM(cursor, packet.payload, sizeof(pid) + TAG_HDR_SIZE);
- memcpy(cursor, &hostUniq, sizeof(pid) + TAG_HDR_SIZE);
- cursor += sizeof(pid) + TAG_HDR_SIZE;
- plen += sizeof(pid) + TAG_HDR_SIZE;
- }
-
- packet.length = htons(plen);
-
- sendPacket(conn, conn->discoverySocket, &packet, (int) (plen + HDR_SIZE));
- if (conn->debugFile) {
- dumpPacket(conn->debugFile, &packet, "SENT");
- fprintf(conn->debugFile, "\n");
- fflush(conn->debugFile);
- }
-}
-
-/**********************************************************************
-*%FUNCTION: waitForPADO
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-* timeout -- how long to wait (in seconds)
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Waits for a PADO packet and copies useful information
-***********************************************************************/
-void
-waitForPADO(PPPoEConnection *conn, int timeout)
-{
- fd_set readable;
- int r;
- struct timeval tv;
- PPPoEPacket packet;
- int len;
-
- struct PacketCriteria pc;
- pc.conn = conn;
- pc.acNameOK = (conn->acName) ? 0 : 1;
- pc.serviceNameOK = (conn->serviceName) ? 0 : 1;
-
- do {
- if (BPF_BUFFER_IS_EMPTY) {
- tv.tv_sec = timeout;
- tv.tv_usec = 0;
-
- FD_ZERO(&readable);
- FD_SET(conn->discoverySocket, &readable);
-
- while(1) {
- r = select(conn->discoverySocket+1, &readable, NULL, NULL, &tv);
- if (r >= 0 || errno != EINTR) break;
- }
- if (r < 0) {
- fatalSys("select (waitForPADO)");
- }
- if (r == 0) return; /* Timed out */
- }
-
- /* Get the packet */
- receivePacket(conn->discoverySocket, &packet, &len);
-
- /* Check length */
- if (ntohs(packet.length) + HDR_SIZE > len) {
- syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
- (unsigned int) ntohs(packet.length));
- continue;
- }
-
-#ifdef USE_BPF
- /* If it's not a Discovery packet, loop again */
- if (etherType(&packet) != Eth_PPPOE_Discovery) continue;
-#endif
-
- if (conn->debugFile) {
- dumpPacket(conn->debugFile, &packet, "RCVD");
- fprintf(conn->debugFile, "\n");
- fflush(conn->debugFile);
- }
- /* If it's not for us, loop again */
- if (!packetIsForMe(conn, &packet)) continue;
-
- if (packet.code == CODE_PADO) {
- if (NOT_UNICAST(packet.ethHdr.h_source)) {
- printErr("Ignoring PADO packet from non-unicast MAC address");
- continue;
- }
- conn->numPADOs++;
- if (conn->printACNames) {
- printf("--------------------------------------------------\n");
- }
- parsePacket(&packet, parsePADOTags, &pc);
- if (pc.acNameOK && pc.serviceNameOK) {
- memcpy(conn->peerEth, packet.ethHdr.h_source, ETH_ALEN);
- if (conn->printACNames) {
- printf("AC-Ethernet-Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
- (unsigned) conn->peerEth[0],
- (unsigned) conn->peerEth[1],
- (unsigned) conn->peerEth[2],
- (unsigned) conn->peerEth[3],
- (unsigned) conn->peerEth[4],
- (unsigned) conn->peerEth[5]);
- continue;
- }
- conn->discoveryState = STATE_RECEIVED_PADO;
- break;
- }
- }
- } while (conn->discoveryState != STATE_RECEIVED_PADO);
-}
-
-/***********************************************************************
-*%FUNCTION: sendPADR
-*%ARGUMENTS:
-* conn -- PPPoE connection structur
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADR packet
-***********************************************************************/
-void
-sendPADR(PPPoEConnection *conn)
-{
- PPPoEPacket packet;
- PPPoETag *svc = (PPPoETag *) packet.payload;
- unsigned char *cursor = packet.payload;
-
- UINT16_t namelen = 0;
- UINT16_t plen;
-
- if (conn->serviceName) {
- namelen = (UINT16_t) strlen(conn->serviceName);
- }
- plen = TAG_HDR_SIZE + namelen;
- CHECK_ROOM(cursor, packet.payload, plen);
-
- memcpy(packet.ethHdr.h_dest, conn->peerEth, ETH_ALEN);
- memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-
- packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
- packet.ver = 1;
- packet.type = 1;
- packet.code = CODE_PADR;
- packet.session = 0;
-
- svc->type = TAG_SERVICE_NAME;
- svc->length = htons(namelen);
- if (conn->serviceName) {
- memcpy(svc->payload, conn->serviceName, namelen);
- }
- cursor += namelen + TAG_HDR_SIZE;
-
- /* If we're using Host-Uniq, copy it over */
- if (conn->useHostUniq) {
- PPPoETag hostUniq;
- pid_t pid = getpid();
- hostUniq.type = htons(TAG_HOST_UNIQ);
- hostUniq.length = htons(sizeof(pid));
- memcpy(hostUniq.payload, &pid, sizeof(pid));
- CHECK_ROOM(cursor, packet.payload, sizeof(pid)+TAG_HDR_SIZE);
- memcpy(cursor, &hostUniq, sizeof(pid) + TAG_HDR_SIZE);
- cursor += sizeof(pid) + TAG_HDR_SIZE;
- plen += sizeof(pid) + TAG_HDR_SIZE;
- }
-
- /* Copy cookie and relay-ID if needed */
- if (conn->cookie.type) {
- CHECK_ROOM(cursor, packet.payload,
- ntohs(conn->cookie.length) + TAG_HDR_SIZE);
- memcpy(cursor, &conn->cookie, ntohs(conn->cookie.length) + TAG_HDR_SIZE);
- cursor += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
- plen += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
- }
-
- if (conn->relayId.type) {
- CHECK_ROOM(cursor, packet.payload,
- ntohs(conn->relayId.length) + TAG_HDR_SIZE);
- memcpy(cursor, &conn->relayId, ntohs(conn->relayId.length) + TAG_HDR_SIZE);
- cursor += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
- plen += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
- }
-
- packet.length = htons(plen);
- sendPacket(conn, conn->discoverySocket, &packet, (int) (plen + HDR_SIZE));
- if (conn->debugFile) {
- dumpPacket(conn->debugFile, &packet, "SENT");
- fprintf(conn->debugFile, "\n");
- fflush(conn->debugFile);
- }
-}
-
-/**********************************************************************
-*%FUNCTION: waitForPADS
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* timeout -- how long to wait (in seconds)
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Waits for a PADS packet and copies useful information
-***********************************************************************/
-void
-waitForPADS(PPPoEConnection *conn, int timeout)
-{
- fd_set readable;
- int r;
- struct timeval tv;
- PPPoEPacket packet;
- int len;
-
- do {
- if (BPF_BUFFER_IS_EMPTY) {
- tv.tv_sec = timeout;
- tv.tv_usec = 0;
-
- FD_ZERO(&readable);
- FD_SET(conn->discoverySocket, &readable);
-
- while(1) {
- r = select(conn->discoverySocket+1, &readable, NULL, NULL, &tv);
- if (r >= 0 || errno != EINTR) break;
- }
- if (r < 0) {
- fatalSys("select (waitForPADS)");
- }
- if (r == 0) return;
- }
-
- /* Get the packet */
- receivePacket(conn->discoverySocket, &packet, &len);
-
- /* Check length */
- if (ntohs(packet.length) + HDR_SIZE > len) {
- syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
- (unsigned int) ntohs(packet.length));
- continue;
- }
-
-#ifdef USE_BPF
- /* If it's not a Discovery packet, loop again */
- if (etherType(&packet) != Eth_PPPOE_Discovery) continue;
-#endif
- if (conn->debugFile) {
- dumpPacket(conn->debugFile, &packet, "RCVD");
- fprintf(conn->debugFile, "\n");
- fflush(conn->debugFile);
- }
-
- /* If it's not from the AC, it's not for me */
- if (memcmp(packet.ethHdr.h_source, conn->peerEth, ETH_ALEN)) continue;
-
- /* If it's not for us, loop again */
- if (!packetIsForMe(conn, &packet)) continue;
-
- /* Is it PADS? */
- if (packet.code == CODE_PADS) {
- /* Parse for goodies */
- parsePacket(&packet, parsePADSTags, conn);
- conn->discoveryState = STATE_SESSION;
- break;
- }
- } while (conn->discoveryState != STATE_SESSION);
-
- /* Don't bother with ntohs; we'll just end up converting it back... */
- conn->session = packet.session;
-
- syslog(LOG_INFO, "PPP session is %d", (int) ntohs(conn->session));
-
- /* RFC 2516 says session id MUST NOT be zero or 0xFFFF */
- if (ntohs(conn->session) == 0 || ntohs(conn->session) == 0xFFFF) {
- syslog(LOG_ERR, "Access concentrator used a session value of %x -- the AC is violating RFC 2516", (unsigned int) ntohs(conn->session));
- }
-}
-
-/**********************************************************************
-*%FUNCTION: discovery
-*%ARGUMENTS:
-* conn -- PPPoE connection info structure
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Performs the PPPoE discovery phase
-***********************************************************************/
-void
-discovery(PPPoEConnection *conn)
-{
- int padiAttempts = 0;
- int padrAttempts = 0;
- int timeout = PADI_TIMEOUT;
-
- /* Skip discovery and don't open discovery socket? */
- if (conn->skipDiscovery && conn->noDiscoverySocket) {
- conn->discoveryState = STATE_SESSION;
- return;
- }
-
- conn->discoverySocket =
- openInterface(conn->ifName, Eth_PPPOE_Discovery, conn->myEth);
-
- /* Skip discovery? */
- if (conn->skipDiscovery) {
- conn->discoveryState = STATE_SESSION;
- if (conn->killSession) {
- sendPADT(conn, "RP-PPPoE: Session killed manually");
- exit(0);
- }
- return;
- }
-
- do {
- padiAttempts++;
- if (padiAttempts > MAX_PADI_ATTEMPTS) {
- rp_fatal("Timeout waiting for PADO packets");
- }
- sendPADI(conn);
- conn->discoveryState = STATE_SENT_PADI;
- waitForPADO(conn, timeout);
-
- /* If we're just probing for access concentrators, don't do
- exponential backoff. This reduces the time for an unsuccessful
- probe to 15 seconds. */
- if (!conn->printACNames) {
- timeout *= 2;
- }
- if (conn->printACNames && conn->numPADOs) {
- break;
- }
- } while (conn->discoveryState == STATE_SENT_PADI);
-
- /* If we're only printing access concentrator names, we're done */
- if (conn->printACNames) {
- printf("--------------------------------------------------\n");
- exit(0);
- }
-
- timeout = PADI_TIMEOUT;
- do {
- padrAttempts++;
- if (padrAttempts > MAX_PADI_ATTEMPTS) {
- rp_fatal("Timeout waiting for PADS packets");
- }
- sendPADR(conn);
- conn->discoveryState = STATE_SENT_PADR;
- waitForPADS(conn, timeout);
- timeout *= 2;
- } while (conn->discoveryState == STATE_SENT_PADR);
-
- /* We're done. */
- conn->discoveryState = STATE_SESSION;
- return;
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/if.c b/mdk-stage1/rp-pppoe/src/if.c
deleted file mode 100644
index fec09b273..000000000
--- a/mdk-stage1/rp-pppoe/src/if.c
+++ /dev/null
@@ -1,1092 +0,0 @@
-/***********************************************************************
-*
-* if.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Functions for opening a raw socket and reading/writing raw Ethernet frames.
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_NETPACKET_PACKET_H
-#include <netpacket/packet.h>
-#elif defined(HAVE_LINUX_IF_PACKET_H)
-#include <linux/if_packet.h>
-#endif
-
-#ifdef HAVE_NET_ETHERNET_H
-#include <net/ethernet.h>
-#endif
-
-#ifdef HAVE_ASM_TYPES_H
-#include <asm/types.h>
-#endif
-
-#ifdef HAVE_SYS_IOCTL_H
-#include <sys/ioctl.h>
-#endif
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <errno.h>
-#include <stdlib.h>
-#include <string.h>
-
-#ifdef HAVE_NET_IF_ARP_H
-#include <net/if_arp.h>
-#endif
-
-#ifdef USE_DLPI
-
-#include <limits.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/dlpi.h>
-#include <sys/bufmod.h>
-#include <stdio.h>
-#include <signal.h>
-#include <stropts.h>
-
-/* function declarations */
-
-void dlpromisconreq( int fd, u_long level);
-void dlinforeq(int fd);
-void dlunitdatareq(int fd, u_char *addrp, int addrlen, u_long minpri, u_long maxpri, u_char *datap, int datalen);
-void dlinfoack(int fd, char *bufp);
-void dlbindreq(int fd, u_long sap, u_long max_conind, u_long service_mode, u_long conn_mgmt, u_long xidtest);
-void dlattachreq(int fd, u_long ppa);
-void dlokack(int fd, char *bufp);
-void dlbindack(int fd, char *bufp);
-int strioctl(int fd, int cmd, int timout, int len, char *dp);
-void strgetmsg(int fd, struct strbuf *ctlp, struct strbuf *datap, int *flagsp, char *caller);
-void sigalrm(int sig);
-void expecting(int prim, union DL_primitives *dlp);
-char *dlprim(u_long prim);
-
-/* #define DL_DEBUG */
-
-static int dl_abssaplen;
-static int dl_saplen;
-static int dl_addrlen;
-
-#endif
-
-#ifdef USE_BPF
-#include <net/bpf.h>
-#include <fcntl.h>
-
-unsigned char *bpfBuffer; /* Packet filter buffer */
-int bpfLength = 0; /* Packet filter buffer length */
-int bpfSize = 0; /* Number of unread bytes in buffer */
-int bpfOffset = 0; /* Current offset in bpfBuffer */
-#endif
-
-/* Initialize frame types to RFC 2516 values. Some broken peers apparently
- use different frame types... sigh... */
-
-UINT16_t Eth_PPPOE_Discovery = ETH_PPPOE_DISCOVERY;
-UINT16_t Eth_PPPOE_Session = ETH_PPPOE_SESSION;
-
-/**********************************************************************
-*%FUNCTION: etherType
-*%ARGUMENTS:
-* packet -- a received PPPoE packet
-*%RETURNS:
-* ethernet packet type (see /usr/include/net/ethertypes.h)
-*%DESCRIPTION:
-* Checks the ethernet packet header to determine its type.
-* We should only be receveing DISCOVERY and SESSION types if the BPF
-* is set up correctly. Logs an error if an unexpected type is received.
-* Note that the ethernet type names come from "pppoe.h" and the packet
-* packet structure names use the LINUX dialect to maintain consistency
-* with the rest of this file. See the BSD section of "pppoe.h" for
-* translations of the data structure names.
-***********************************************************************/
-UINT16_t
-etherType(PPPoEPacket *packet)
-{
- UINT16_t type = (UINT16_t) ntohs(packet->ethHdr.h_proto);
- if (type != Eth_PPPOE_Discovery && type != Eth_PPPOE_Session) {
- syslog(LOG_ERR, "Invalid ether type 0x%x", type);
- }
- return type;
-}
-
-#ifdef USE_BPF
-/**********************************************************************
-*%FUNCTION: getHWaddr
-*%ARGUMENTS:
-* ifname -- name of interface
-* hwaddr -- buffer for ehthernet address
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Locates the Ethernet hardware address for an interface.
-***********************************************************************/
-void
-getHWaddr(int sock, char const *ifname, unsigned char *hwaddr)
-{
- char inbuf[8192];
- const struct sockaddr_dl *sdl;
- struct ifconf ifc;
- struct ifreq ifreq, *ifr;
- int i;
- int found = 0;
-
- ifc.ifc_len = sizeof(inbuf);
- ifc.ifc_buf = inbuf;
- if (ioctl(sock, SIOCGIFCONF, &ifc) < 0) {
- fatalSys("SIOCGIFCONF");
- }
- ifr = ifc.ifc_req;
- ifreq.ifr_name[0] = '\0';
- for (i = 0; i < ifc.ifc_len; ) {
- ifr = (struct ifreq *)((caddr_t)ifc.ifc_req + i);
- i += sizeof(ifr->ifr_name) +
- (ifr->ifr_addr.sa_len > sizeof(struct sockaddr)
- ? ifr->ifr_addr.sa_len
- : sizeof(struct sockaddr));
- if (ifr->ifr_addr.sa_family == AF_LINK) {
- sdl = (const struct sockaddr_dl *) &ifr->ifr_addr;
- if ((sdl->sdl_type == IFT_ETHER) &&
- (sdl->sdl_alen == ETH_ALEN) &&
- !strncmp(ifname, ifr->ifr_name, sizeof(ifr->ifr_name))) {
- if (found) {
- char buffer[256];
- sprintf(buffer, "interface %.16s has more than one ethernet address", ifname);
- rp_fatal(buffer);
- } else {
- found = 1;
- memcpy(hwaddr, LLADDR(sdl), ETH_ALEN);
- }
- }
- }
- }
- if (!found) {
- char buffer[256];
- sprintf(buffer, "interface %.16s has no ethernet address", ifname);
- rp_fatal(buffer);
- }
-}
-
-/**********************************************************************
-*%FUNCTION: initFilter
-*%ARGUMENTS:
-* fd -- file descriptor of BSD device
-* type -- Ethernet frame type (0 for watch mode)
-* hwaddr -- buffer with ehthernet address
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Initializes the packet filter rules.
-***********************************************************************/
-void
-initFilter(int fd, UINT16_t type, unsigned char *hwaddr)
-{
- /* Packet Filter Instructions:
- * Note that the ethernet type names come from "pppoe.h" and are
- * used here to maintain consistency with the rest of this file. */
- static struct bpf_insn bpfRun[] = { /* run PPPoE */
- BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 12), /* ethernet type */
- BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_SESSION, 5, 0),
- BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_DISCOVERY, 0, 9),
- BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0), /* first word of dest. addr */
-#define PPPOE_BCAST_CMPW 4 /* offset of word compare */
- BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 2),
- BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4), /* next 1/2 word of dest. */
-#define PPPOE_BCAST_CMPH 6 /* offset of 1/2 word compare */
- BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 4, 0),
- BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0), /* first word of dest. addr */
-#define PPPOE_FILTER_CMPW 8 /* offset of word compare */
- BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 3),
- BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4), /* next 1/2 word of dest. */
-#define PPPOE_FILTER_CMPH 10 /* offset of 1/rd compare */
- BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 1),
- BPF_STMT(BPF_RET+BPF_K, (u_int) -1), /* keep packet */
- BPF_STMT(BPF_RET+BPF_K, 0), /* drop packet */
- };
-
- /* Fix the potentially varying parts */
- bpfRun[1].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
- bpfRun[1].jt = 5;
- bpfRun[1].jf = 0;
- bpfRun[1].k = Eth_PPPOE_Session;
-
- bpfRun[2].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
- bpfRun[2].jt = 0;
- bpfRun[2].jf = 9;
- bpfRun[2].k = Eth_PPPOE_Discovery;
-
- {
- struct bpf_insn bpfInsn[sizeof(bpfRun) / sizeof(bpfRun[0])];
- struct bpf_program bpfProgram;
- memcpy(bpfInsn, bpfRun, sizeof(bpfRun));
- bpfInsn[PPPOE_BCAST_CMPW].k = ((0xff << 24) | (0xff << 16) |
- (0xff << 8) | 0xff);
- bpfInsn[PPPOE_BCAST_CMPH].k = ((0xff << 8) | 0xff);
- bpfInsn[PPPOE_FILTER_CMPW].k = ((hwaddr[0] << 24) | (hwaddr[1] << 16) |
- (hwaddr[2] << 8) | hwaddr[3]);
- bpfInsn[PPPOE_FILTER_CMPH].k = ((hwaddr[4] << 8) | hwaddr[5]);
- bpfProgram.bf_len = (sizeof(bpfInsn) / sizeof(bpfInsn[0]));
- bpfProgram.bf_insns = &bpfInsn[0];
-
- /* Apply the filter */
- if (ioctl(fd, BIOCSETF, &bpfProgram) < 0) {
- fatalSys("ioctl(BIOCSETF)");
- }
- }
-}
-
-/**********************************************************************
-*%FUNCTION: openInterface
-*%ARGUMENTS:
-* ifname -- name of interface
-* type -- Ethernet frame type (0 for any frame type)
-* hwaddr -- if non-NULL, set to the hardware address
-*%RETURNS:
-* A file descriptor for talking with the Ethernet card. Exits on error.
-* Note that the Linux version of this routine returns a socket instead.
-*%DESCRIPTION:
-* Opens a BPF on an interface for all PPPoE traffic (discovery and
-* session). If 'type' is 0, uses promiscuous mode to watch any PPPoE
-* traffic on this network.
-***********************************************************************/
-int
-openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
-{
- static int fd = -1;
- char bpfName[32];
- u_int optval;
- struct bpf_version bpf_ver;
- struct ifreq ifr;
- int sock;
- int i;
-
- /* BSD only opens one socket for both Discovery and Session packets */
- if (fd >= 0) {
- return fd;
- }
-
- /* Find a free BPF device */
- for (i = 0; i < 256; i++) {
- sprintf(bpfName, "/dev/bpf%d", i);
- if (((fd = open(bpfName, O_RDWR, 0)) >= 0) ||
- (errno != EBUSY)) {
- break;
- }
- }
- if (fd < 0) {
- switch (errno) {
- case EACCES: /* permission denied */
- {
- char buffer[256];
- sprintf(buffer, "Cannot open %.32s -- pppoe must be run as root.", bpfName);
- rp_fatal(buffer);
- }
- break;
- case EBUSY:
- case ENOENT: /* no such file */
- if (i == 0) {
- rp_fatal("No /dev/bpf* devices (check your kernel configuration for BPF support)");
- } else {
- rp_fatal("All /dev/bpf* devices are in use");
- }
- break;
- }
- fatalSys(bpfName);
- }
-
- if ((sock = socket(AF_LOCAL, SOCK_DGRAM, 0)) < 0) {
- fatalSys("socket");
- }
-
- /* Check that the interface is up */
- strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(sock, SIOCGIFFLAGS, &ifr) < 0) {
- fatalSys("ioctl(SIOCGIFFLAGS)");
- }
- if ((ifr.ifr_flags & IFF_UP) == 0) {
- char buffer[256];
- sprintf(buffer, "Interface %.16s is not up\n", ifname);
- rp_fatal(buffer);
- }
-
- /* Fill in hardware address and initialize the packet filter rules */
- if (hwaddr == NULL) {
- rp_fatal("openInterface: no hwaddr arg.");
- }
- getHWaddr(sock, ifname, hwaddr);
- initFilter(fd, type, hwaddr);
-
- /* Sanity check on MTU -- apparently does not work on OpenBSD */
-#if !defined(__OpenBSD__)
- strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(sock, SIOCGIFMTU, &ifr) < 0) {
- fatalSys("ioctl(SIOCGIFMTU)");
- }
- if (ifr.ifr_mtu < ETH_DATA_LEN) {
- char buffer[256];
- sprintf(buffer, "Interface %.16s has MTU of %d -- should be %d. You may have serious connection problems.",
- ifname, ifr.ifr_mtu, ETH_DATA_LEN);
- printErr(buffer);
- }
-#endif
-
- /* done with the socket */
- if (close(sock) < 0) {
- fatalSys("close");
- }
-
- /* Check the BPF version number */
- if (ioctl(fd, BIOCVERSION, &bpf_ver) < 0) {
- fatalSys("ioctl(BIOCVERSION)");
- }
- if ((bpf_ver.bv_major != BPF_MAJOR_VERSION) ||
- (bpf_ver.bv_minor < BPF_MINOR_VERSION)) {
- char buffer[256];
- sprintf(buffer, "Unsupported BPF version: %d.%d (kernel: %d.%d)",
- BPF_MAJOR_VERSION, BPF_MINOR_VERSION,
- bpf_ver.bv_major, bpf_ver.bv_minor);
- rp_fatal(buffer);
- }
-
- /* allocate a receive packet buffer */
- if (ioctl(fd, BIOCGBLEN, &bpfLength) < 0) {
- fatalSys("ioctl(BIOCGBLEN)");
- }
- if (!(bpfBuffer = (unsigned char *) malloc(bpfLength))) {
- rp_fatal("malloc");
- }
-
- /* reads should return as soon as there is a packet available */
- optval = 1;
- if (ioctl(fd, BIOCIMMEDIATE, &optval) < 0) {
- fatalSys("ioctl(BIOCIMMEDIATE)");
- }
-
- /* Bind the interface to the filter */
- strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(fd, BIOCSETIF, &ifr) < 0) {
- char buffer[256];
- sprintf(buffer, "ioctl(BIOCSETIF) can't select interface %.16s",
- ifname);
- rp_fatal(buffer);
- }
-
- syslog(LOG_INFO, "Interface=%.16s HWaddr=%02X:%02X:%02X:%02X:%02X:%02X Device=%.32s Buffer size=%d",
- ifname,
- hwaddr[0], hwaddr[1], hwaddr[2],
- hwaddr[3], hwaddr[4], hwaddr[5],
- bpfName, bpfLength);
- return fd;
-}
-
-#endif /* USE_BPF */
-
-#ifdef USE_LINUX_PACKET
-/**********************************************************************
-*%FUNCTION: openInterface
-*%ARGUMENTS:
-* ifname -- name of interface
-* type -- Ethernet frame type
-* hwaddr -- if non-NULL, set to the hardware address
-*%RETURNS:
-* A raw socket for talking to the Ethernet card. Exits on error.
-*%DESCRIPTION:
-* Opens a raw Ethernet socket
-***********************************************************************/
-int
-openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
-{
- int optval=1;
- int fd;
- struct ifreq ifr;
- int domain, stype;
-
-#ifdef HAVE_STRUCT_SOCKADDR_LL
- struct sockaddr_ll sa;
-#else
- struct sockaddr sa;
-#endif
-
- memset(&sa, 0, sizeof(sa));
-
-#ifdef HAVE_STRUCT_SOCKADDR_LL
- domain = PF_PACKET;
- stype = SOCK_RAW;
-#else
- domain = PF_INET;
- stype = SOCK_PACKET;
-#endif
-
- if ((fd = socket(domain, stype, htons(type))) < 0) {
- /* Give a more helpful message for the common error case */
- if (errno == EPERM) {
- rp_fatal("Cannot create raw socket -- pppoe must be run as root.");
- }
- fatalSys("socket");
- }
-
- if (setsockopt(fd, SOL_SOCKET, SO_BROADCAST, &optval, sizeof(optval)) < 0) {
- fatalSys("setsockopt");
- }
-
- /* Fill in hardware address */
- if (hwaddr) {
- strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(fd, SIOCGIFHWADDR, &ifr) < 0) {
- fatalSys("ioctl(SIOCGIFHWADDR)");
- }
- memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETH_ALEN);
-#ifdef ARPHRD_ETHER
- if (ifr.ifr_hwaddr.sa_family != ARPHRD_ETHER) {
- char buffer[256];
- sprintf(buffer, "Interface %.16s is not Ethernet", ifname);
- rp_fatal(buffer);
- }
-#endif
- if (NOT_UNICAST(hwaddr)) {
- char buffer[256];
- sprintf(buffer,
- "Interface %.16s has broadcast/multicast MAC address??",
- ifname);
- rp_fatal(buffer);
- }
- }
-
- /* Sanity check on MTU */
- strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(fd, SIOCGIFMTU, &ifr) < 0) {
- fatalSys("ioctl(SIOCGIFMTU)");
- }
- if (ifr.ifr_mtu < ETH_DATA_LEN) {
- char buffer[256];
- sprintf(buffer, "Interface %.16s has MTU of %d -- should be %d. You may have serious connection problems.",
- ifname, ifr.ifr_mtu, ETH_DATA_LEN);
- printErr(buffer);
- }
-
-#ifdef HAVE_STRUCT_SOCKADDR_LL
- /* Get interface index */
- sa.sll_family = AF_PACKET;
- sa.sll_protocol = htons(type);
-
- strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- if (ioctl(fd, SIOCGIFINDEX, &ifr) < 0) {
- fatalSys("ioctl(SIOCFIGINDEX): Could not get interface index");
- }
- sa.sll_ifindex = ifr.ifr_ifindex;
-
-#else
- strcpy(sa.sa_data, ifname);
-#endif
-
- /* We're only interested in packets on specified interface */
- if (bind(fd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
- fatalSys("bind");
- }
-
- return fd;
-}
-
-#endif /* USE_LINUX */
-
-/***********************************************************************
-*%FUNCTION: sendPacket
-*%ARGUMENTS:
-* sock -- socket to send to
-* pkt -- the packet to transmit
-* size -- size of packet (in bytes)
-*%RETURNS:
-* 0 on success; -1 on failure
-*%DESCRIPTION:
-* Transmits a packet
-***********************************************************************/
-int
-sendPacket(PPPoEConnection *conn, int sock, PPPoEPacket *pkt, int size)
-{
-#if defined(USE_BPF)
- if (write(sock, pkt, size) < 0) {
- sysErr("write (sendPacket)");
- return -1;
- }
-#elif defined(HAVE_STRUCT_SOCKADDR_LL)
- if (send(sock, pkt, size, 0) < 0) {
- sysErr("send (sendPacket)");
- return -1;
- }
-#else
-#ifdef USE_DLPI
-
-#define ABS(x) ((x) < 0 ? -(x) : (x))
-
- u_char addr[MAXDLADDR];
- u_char phys[MAXDLADDR];
- u_char sap[MAXDLADDR];
- u_char xmitbuf[MAXDLBUF];
- int data_size;
-
- short tmp_sap;
-
- tmp_sap = htons(pkt->ethHdr.h_proto);
- data_size = size - sizeof(struct ethhdr);
-
- memcpy((char *)phys, (char *)pkt->ethHdr.h_dest, ETHERADDRL);
- memcpy((char *)sap, (char *)&tmp_sap, sizeof(ushort_t));
- memcpy((char *)xmitbuf, (char *)pkt + sizeof(struct ethhdr), data_size);
-
- if (dl_saplen > 0) { /* order is sap+phys */
- (void) memcpy((char*)addr, (char*)&sap, dl_abssaplen);
- (void) memcpy((char*)addr+dl_abssaplen, (char*)phys, ETHERADDRL);
- } else { /* order is phys+sap */
- (void) memcpy((char*)addr, (char*)phys, ETHERADDRL);
- (void) memcpy((char*)addr+ETHERADDRL, (char*)&sap, dl_abssaplen);
- }
-
-#ifdef DL_DEBUG
- printf("%02x:%02x:%02x:%02x:%02x:%02x %02x:%02x\n",
- addr[0],addr[1],addr[2],addr[3],addr[4],addr[5],
- addr[6],addr[7]);
-#endif
-
- dlunitdatareq(sock, addr, dl_addrlen, 0, 0, xmitbuf, data_size);
-
-
-
-#else
- struct sockaddr sa;
-
- if (!conn) {
- rp_fatal("relay and server not supported on Linux 2.0 kernels");
- }
- strcpy(sa.sa_data, conn->ifName);
- if (sendto(sock, pkt, size, 0, &sa, sizeof(sa)) < 0) {
- sysErr("sendto (sendPacket)");
- return -1;
- }
-#endif
-#endif
- return 0;
-}
-
-#ifdef USE_BPF
-/***********************************************************************
-*%FUNCTION: clearPacketHeader
-*%ARGUMENTS:
-* pkt -- packet that needs its head clearing
-*%RETURNS:
-* nothing
-*%DESCRIPTION:
-* Clears a PPPoE packet header after a truncated packet has been
-* received. Insures that the packet will fail any integrity tests
-* and will be discarded by upper level routines. Also resets the
-* bpfSize and bpfOffset variables to force a new read on the next
-* call to receivePacket().
-***********************************************************************/
-void
-clearPacketHeader(PPPoEPacket *pkt)
-{
- bpfSize = bpfOffset = 0;
- memset(pkt, 0, HDR_SIZE);
-}
-#endif
-
-/***********************************************************************
-*%FUNCTION: receivePacket
-*%ARGUMENTS:
-* sock -- socket to read from
-* pkt -- place to store the received packet
-* size -- set to size of packet in bytes
-*%RETURNS:
-* >= 0 if all OK; < 0 if error
-*%DESCRIPTION:
-* Receives a packet
-***********************************************************************/
-int
-receivePacket(int sock, PPPoEPacket *pkt, int *size)
-{
-#ifdef USE_BPF
- struct bpf_hdr hdr;
- int seglen, copylen;
-
- if (bpfSize <= 0) {
- bpfOffset = 0;
- if ((bpfSize = read(sock, bpfBuffer, bpfLength)) < 0) {
- sysErr("read (receivePacket)");
- return -1;
- }
- }
- if (bpfSize < sizeof(hdr)) {
- syslog(LOG_ERR, "Truncated bpf packet header: len=%d", bpfSize);
- clearPacketHeader(pkt); /* resets bpfSize and bpfOffset */
- return 0;
- }
- memcpy(&hdr, bpfBuffer + bpfOffset, sizeof(hdr));
- if (hdr.bh_caplen != hdr.bh_datalen) {
- syslog(LOG_ERR, "Truncated bpf packet: caplen=%d, datalen=%d",
- hdr.bh_caplen, hdr.bh_datalen);
- clearPacketHeader(pkt); /* resets bpfSize and bpfOffset */
- return 0;
- }
- seglen = hdr.bh_hdrlen + hdr.bh_caplen;
- if (seglen > bpfSize) {
- syslog(LOG_ERR, "Truncated bpf packet: seglen=%d, bpfSize=%d",
- seglen, bpfSize);
- clearPacketHeader(pkt); /* resets bpfSize and bpfOffset */
- return 0;
- }
- seglen = BPF_WORDALIGN(seglen);
- *size = copylen = ((hdr.bh_caplen < sizeof(PPPoEPacket)) ?
- hdr.bh_caplen : sizeof(PPPoEPacket));
- memcpy(pkt, bpfBuffer + bpfOffset + hdr.bh_hdrlen, copylen);
- if (seglen >= bpfSize) {
- bpfSize = bpfOffset = 0;
- } else {
- bpfSize -= seglen;
- bpfOffset += seglen;
- }
-#else
-#ifdef USE_DLPI
- struct strbuf data;
- int flags = 0;
- int retval;
-
- data.buf = (char *) pkt;
- data.maxlen = MAXDLBUF;
- data.len = 0;
-
- if ((retval = getmsg(sock, NULL, &data, &flags)) < 0) {
- sysErr("read (receivePacket)");
- return -1;
- }
-
- *size = data.len;
-
-#else
- if ((*size = recv(sock, pkt, sizeof(PPPoEPacket), 0)) < 0) {
- sysErr("recv (receivePacket)");
- return -1;
- }
-#endif
-#endif
- return 0;
-}
-
-#ifdef USE_DLPI
-/**********************************************************************
-*%FUNCTION: openInterface
-*%ARGUMENTS:
-* ifname -- name of interface
-* type -- Ethernet frame type
-* hwaddr -- if non-NULL, set to the hardware address
-*%RETURNS:
-* A raw socket for talking to the Ethernet card. Exits on error.
-*%DESCRIPTION:
-* Opens a raw Ethernet socket
-***********************************************************************/
-int
-openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
-{
- int fd;
- long buf[MAXDLBUF];
-
- union DL_primitives *dlp;
-
- char base_dev[PATH_MAX];
- int ppa;
-
- if(strlen(ifname) > PATH_MAX) {
- rp_fatal("socket: string to long");
- }
-
- ppa = atoi(&ifname[strlen(ifname)-1]);
- strncpy(base_dev, ifname, PATH_MAX);
- base_dev[strlen(base_dev)-1] = '\0';
-
- if (( fd = open(base_dev, O_RDWR)) < 0) {
- /* Give a more helpful message for the common error case */
- if (errno == EPERM) {
- rp_fatal("Cannot create raw socket -- pppoe must be run as root.");
- }
- fatalSys("socket");
- }
-
- dlinforeq(fd);
- dlinfoack(fd, (char *)buf);
-
- dlp = (union DL_primitives*) buf;
-
- dl_abssaplen = ABS(dlp->info_ack.dl_sap_length);
- dl_saplen = dlp->info_ack.dl_sap_length;
- if (ETHERADDRL != (dlp->info_ack.dl_addr_length - dl_abssaplen))
- fatalSys("invalid destination physical address length");
- dl_addrlen = dl_abssaplen + ETHERADDRL;
-
- dlattachreq(fd, ppa);
- dlokack(fd, (char *)buf);
-
- dlbindreq(fd, type, 0, DL_CLDLS, 0, 0);
- dlbindack(fd, (char *)buf);
-
- if ( strioctl(fd, DLIOCRAW, -1, 0, NULL) < 0 ) {
- fatalSys("DLIOCRAW");
- }
-
- if (ioctl(fd, I_FLUSH, FLUSHR) < 0) fatalSys("I_FLUSH");
-
- return fd;
-}
-
-/* cloned from dlcommon.c */
-
-void dlpromisconreq(int fd, u_long level)
-{
- dl_promiscon_req_t promiscon_req;
- struct strbuf ctl;
- int flags;
-
- promiscon_req.dl_primitive = DL_PROMISCON_REQ;
- promiscon_req.dl_level = level;
-
- ctl.maxlen = 0;
- ctl.len = sizeof (promiscon_req);
- ctl.buf = (char *) &promiscon_req;
-
- flags = 0;
-
- if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
- fatalSys("dlpromiscon: putmsg");
-
-}
-
-void dlinforeq(int fd)
-{
- dl_info_req_t info_req;
- struct strbuf ctl;
- int flags;
-
- info_req.dl_primitive = DL_INFO_REQ;
-
- ctl.maxlen = 0;
- ctl.len = sizeof (info_req);
- ctl.buf = (char *) &info_req;
-
- flags = RS_HIPRI;
-
- if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
- fatalSys("dlinforeq: putmsg");
-}
-
-void dlunitdatareq(int fd, u_char *addrp, int addrlen, u_long minpri, u_long maxpri, u_char *datap, int datalen)
-{
- long buf[MAXDLBUF];
- union DL_primitives *dlp;
- struct strbuf data, ctl;
-
- dlp = (union DL_primitives*) buf;
-
- dlp->unitdata_req.dl_primitive = DL_UNITDATA_REQ;
- dlp->unitdata_req.dl_dest_addr_length = addrlen;
- dlp->unitdata_req.dl_dest_addr_offset = sizeof (dl_unitdata_req_t);
- dlp->unitdata_req.dl_priority.dl_min = minpri;
- dlp->unitdata_req.dl_priority.dl_max = maxpri;
-
- (void) memcpy(OFFADDR(dlp, sizeof (dl_unitdata_req_t)), addrp, addrlen);
-
- ctl.maxlen = 0;
- ctl.len = sizeof (dl_unitdata_req_t) + addrlen;
- ctl.buf = (char *) buf;
-
- data.maxlen = 0;
- data.len = datalen;
- data.buf = (char *) datap;
-
- if (putmsg(fd, &ctl, &data, 0) < 0)
- fatalSys("dlunitdatareq: putmsg");
-}
-
-void dlinfoack(int fd, char *bufp)
-{
- union DL_primitives *dlp;
- struct strbuf ctl;
- int flags;
-
- ctl.maxlen = MAXDLBUF;
- ctl.len = 0;
- ctl.buf = bufp;
-
- strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlinfoack");
-
- dlp = (union DL_primitives *) ctl.buf;
-
- expecting(DL_INFO_ACK, dlp);
-
- if (ctl.len < sizeof (dl_info_ack_t)) {
- char buffer[256];
- sprintf(buffer, "dlinfoack: response ctl.len too short: %d", ctl.len);
- rp_fatal(buffer);
- }
-
- if (flags != RS_HIPRI)
- rp_fatal("dlinfoack: DL_INFO_ACK was not M_PCPROTO");
-
- if (ctl.len < sizeof (dl_info_ack_t)) {
- char buffer[256];
- sprintf(buffer, "dlinfoack: short response ctl.len: %d", ctl.len);
- rp_fatal(buffer);
- }
-}
-
-void dlbindreq(int fd, u_long sap, u_long max_conind, u_long service_mode, u_long conn_mgmt, u_long xidtest)
-{
- dl_bind_req_t bind_req;
- struct strbuf ctl;
- int flags;
-
- bind_req.dl_primitive = DL_BIND_REQ;
- bind_req.dl_sap = sap;
- bind_req.dl_max_conind = max_conind;
- bind_req.dl_service_mode = service_mode;
- bind_req.dl_conn_mgmt = conn_mgmt;
- bind_req.dl_xidtest_flg = xidtest;
-
- ctl.maxlen = 0;
- ctl.len = sizeof (bind_req);
- ctl.buf = (char *) &bind_req;
-
- flags = 0;
-
- if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
- fatalSys("dlbindreq: putmsg");
-}
-
-void dlattachreq(int fd, u_long ppa)
-{
- dl_attach_req_t attach_req;
- struct strbuf ctl;
- int flags;
-
- attach_req.dl_primitive = DL_ATTACH_REQ;
- attach_req.dl_ppa = ppa;
-
- ctl.maxlen = 0;
- ctl.len = sizeof (attach_req);
- ctl.buf = (char *) &attach_req;
-
- flags = 0;
-
- if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
- fatalSys("dlattachreq: putmsg");
-}
-
-void dlokack(int fd, char *bufp)
-{
- union DL_primitives *dlp;
- struct strbuf ctl;
- int flags;
-
- ctl.maxlen = MAXDLBUF;
- ctl.len = 0;
- ctl.buf = bufp;
-
- strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlokack");
-
- dlp = (union DL_primitives *) ctl.buf;
-
- expecting(DL_OK_ACK, dlp);
-
- if (ctl.len < sizeof (dl_ok_ack_t)) {
- char buffer[256];
- sprintf(buffer, "dlokack: response ctl.len too short: %d", ctl.len);
- rp_fatal(buffer);
- }
-
- if (flags != RS_HIPRI)
- rp_fatal("dlokack: DL_OK_ACK was not M_PCPROTO");
-
- if (ctl.len < sizeof (dl_ok_ack_t)) {
- char buffer[256];
- sprintf(buffer, "dlokack: short response ctl.len: %d", ctl.len);
- rp_fatal(buffer);
- }
-}
-
-void dlbindack(int fd, char *bufp)
-{
- union DL_primitives *dlp;
- struct strbuf ctl;
- int flags;
-
- ctl.maxlen = MAXDLBUF;
- ctl.len = 0;
- ctl.buf = bufp;
-
- strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlbindack");
-
- dlp = (union DL_primitives *) ctl.buf;
-
- expecting(DL_BIND_ACK, dlp);
-
- if (flags != RS_HIPRI)
- rp_fatal("dlbindack: DL_OK_ACK was not M_PCPROTO");
-
- if (ctl.len < sizeof (dl_bind_ack_t)) {
- char buffer[256];
- sprintf(buffer, "dlbindack: short response ctl.len: %d", ctl.len);
- rp_fatal(buffer);
- }
-}
-
-int strioctl(int fd, int cmd, int timout, int len, char *dp)
-{
- struct strioctl sioc;
- int rc;
-
- sioc.ic_cmd = cmd;
- sioc.ic_timout = timout;
- sioc.ic_len = len;
- sioc.ic_dp = dp;
- rc = ioctl(fd, I_STR, &sioc);
-
- if (rc < 0)
- return (rc);
- else
- return (sioc.ic_len);
-}
-
-void strgetmsg(int fd, struct strbuf *ctlp, struct strbuf *datap, int *flagsp, char *caller)
-{
- int rc;
- static char errmsg[80];
-
- /*
- * Start timer.
- */
- (void) signal(SIGALRM, sigalrm);
- if (alarm(MAXWAIT) < 0) {
- (void) sprintf(errmsg, "%s: alarm", caller);
- fatalSys(errmsg);
- }
-
- /*
- * Set flags argument and issue getmsg().
- */
- *flagsp = 0;
- if ((rc = getmsg(fd, ctlp, datap, flagsp)) < 0) {
- (void) sprintf(errmsg, "%s: getmsg", caller);
- fatalSys(errmsg);
- }
-
- /*
- * Stop timer.
- */
- if (alarm(0) < 0) {
- (void) sprintf(errmsg, "%s: alarm", caller);
- fatalSys(errmsg);
- }
-
- /*
- * Check for MOREDATA and/or MORECTL.
- */
- if ((rc & (MORECTL | MOREDATA)) == (MORECTL | MOREDATA)) {
- char buffer[256];
- sprintf(buffer, "%s: MORECTL|MOREDATA", caller);
- rp_fatal(buffer);
- }
-
- if (rc & MORECTL) {
- char buffer[256];
- sprintf(buffer, "%s: MORECTL", caller);
- rp_fatal(buffer);
- }
-
- if (rc & MOREDATA) {
- char buffer[256];
- sprintf(buffer, "%s: MOREDATA", caller);
- rp_fatal(buffer);
- }
-
- /*
- * Check for at least sizeof (long) control data portion.
- */
- if (ctlp->len < sizeof (long)) {
- char buffer[256];
- sprintf(buffer, "getmsg: control portion length < sizeof (long): %d", ctlp->len);
- rp_fatal(buffer);
- }
-}
-
-void sigalrm(int sig)
-{
- (void) rp_fatal("sigalrm: TIMEOUT");
-}
-
-void expecting(int prim, union DL_primitives *dlp)
-{
- if (dlp->dl_primitive != (u_long)prim) {
- char buffer[256];
- sprintf(buffer, "expected %s got %s", dlprim(prim), dlprim(dlp->dl_primitive));
- rp_fatal(buffer);
- exit(1);
- }
-}
-
-char *dlprim(u_long prim)
-{
- static char primbuf[80];
-
- switch ((int)prim) {
- CASERET(DL_INFO_REQ);
- CASERET(DL_INFO_ACK);
- CASERET(DL_ATTACH_REQ);
- CASERET(DL_DETACH_REQ);
- CASERET(DL_BIND_REQ);
- CASERET(DL_BIND_ACK);
- CASERET(DL_UNBIND_REQ);
- CASERET(DL_OK_ACK);
- CASERET(DL_ERROR_ACK);
- CASERET(DL_SUBS_BIND_REQ);
- CASERET(DL_SUBS_BIND_ACK);
- CASERET(DL_UNITDATA_REQ);
- CASERET(DL_UNITDATA_IND);
- CASERET(DL_UDERROR_IND);
- CASERET(DL_UDQOS_REQ);
- CASERET(DL_CONNECT_REQ);
- CASERET(DL_CONNECT_IND);
- CASERET(DL_CONNECT_RES);
- CASERET(DL_CONNECT_CON);
- CASERET(DL_TOKEN_REQ);
- CASERET(DL_TOKEN_ACK);
- CASERET(DL_DISCONNECT_REQ);
- CASERET(DL_DISCONNECT_IND);
- CASERET(DL_RESET_REQ);
- CASERET(DL_RESET_IND);
- CASERET(DL_RESET_RES);
- CASERET(DL_RESET_CON);
- default:
- (void) sprintf(primbuf, "unknown primitive 0x%lx", prim);
- return (primbuf);
- }
-}
-
-#endif /* USE_DLPI */
diff --git a/mdk-stage1/rp-pppoe/src/install-sh b/mdk-stage1/rp-pppoe/src/install-sh
deleted file mode 100755
index 58719246f..000000000
--- a/mdk-stage1/rp-pppoe/src/install-sh
+++ /dev/null
@@ -1,238 +0,0 @@
-#! /bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- true
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- else
- instcmd=mkdir
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- true
- fi
-
- pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- true
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/src/md5.c b/mdk-stage1/rp-pppoe/src/md5.c
deleted file mode 100644
index 5b7a0d7b2..000000000
--- a/mdk-stage1/rp-pppoe/src/md5.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * This code implements the MD5 message-digest algorithm.
- * The algorithm is due to Ron Rivest. This code was
- * written by Colin Plumb in 1993, no copyright is claimed.
- * This code is in the public domain; do with it what you wish.
- *
- * Equivalent code is available from RSA Data Security, Inc.
- * This code has been tested against that, and is equivalent,
- * except that you don't need to include two pages of legalese
- * with every copy.
- *
- * To compute the message digest of a chunk of bytes, declare an
- * MD5Context structure, pass it to MD5Init, call MD5Update as
- * needed on buffers full of bytes, and then call MD5Final, which
- * will fill a supplied 16-byte array with the digest.
- */
-#include <string.h> /* for memcpy() */
-#include "md5.h"
-
-void byteReverse(unsigned char *buf, unsigned longs);
-
-/*
- * Note: this code is harmless on little-endian machines.
- */
-void byteReverse(unsigned char *buf, unsigned longs)
-{
- uint32 t;
- do {
- t = (uint32) ((unsigned) buf[3] << 8 | buf[2]) << 16 |
- ((unsigned) buf[1] << 8 | buf[0]);
- *(uint32 *) buf = t;
- buf += 4;
- } while (--longs);
-}
-
-/*
- * Start MD5 accumulation. Set bit count to 0 and buffer to mysterious
- * initialization constants.
- */
-void MD5Init(struct MD5Context *ctx)
-{
- ctx->buf[0] = 0x67452301;
- ctx->buf[1] = 0xefcdab89;
- ctx->buf[2] = 0x98badcfe;
- ctx->buf[3] = 0x10325476;
-
- ctx->bits[0] = 0;
- ctx->bits[1] = 0;
-}
-
-/*
- * Update context to reflect the concatenation of another buffer full
- * of bytes.
- */
-void MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len)
-{
- uint32 t;
-
- /* Update bitcount */
-
- t = ctx->bits[0];
- if ((ctx->bits[0] = t + ((uint32) len << 3)) < t)
- ctx->bits[1]++; /* Carry from low to high */
- ctx->bits[1] += len >> 29;
-
- t = (t >> 3) & 0x3f; /* Bytes already in shsInfo->data */
-
- /* Handle any leading odd-sized chunks */
-
- if (t) {
- unsigned char *p = (unsigned char *) ctx->in + t;
-
- t = 64 - t;
- if (len < t) {
- memcpy(p, buf, len);
- return;
- }
- memcpy(p, buf, t);
- byteReverse(ctx->in, 16);
- MD5Transform(ctx->buf, (uint32 *) ctx->in);
- buf += t;
- len -= t;
- }
- /* Process data in 64-byte chunks */
-
- while (len >= 64) {
- memcpy(ctx->in, buf, 64);
- byteReverse(ctx->in, 16);
- MD5Transform(ctx->buf, (uint32 *) ctx->in);
- buf += 64;
- len -= 64;
- }
-
- /* Handle any remaining bytes of data. */
-
- memcpy(ctx->in, buf, len);
-}
-
-/*
- * Final wrapup - pad to 64-byte boundary with the bit pattern
- * 1 0* (64-bit count of bits processed, MSB-first)
- */
-void MD5Final(unsigned char digest[16], struct MD5Context *ctx)
-{
- unsigned count;
- unsigned char *p;
-
- /* Compute number of bytes mod 64 */
- count = (ctx->bits[0] >> 3) & 0x3F;
-
- /* Set the first char of padding to 0x80. This is safe since there is
- always at least one byte free */
- p = ctx->in + count;
- *p++ = 0x80;
-
- /* Bytes of padding needed to make 64 bytes */
- count = 64 - 1 - count;
-
- /* Pad out to 56 mod 64 */
- if (count < 8) {
- /* Two lots of padding: Pad the first block to 64 bytes */
- memset(p, 0, count);
- byteReverse(ctx->in, 16);
- MD5Transform(ctx->buf, (uint32 *) ctx->in);
-
- /* Now fill the next block with 56 bytes */
- memset(ctx->in, 0, 56);
- } else {
- /* Pad block to 56 bytes */
- memset(p, 0, count - 8);
- }
- byteReverse(ctx->in, 14);
-
- /* Append length in bits and transform */
- ((uint32 *) ctx->in)[14] = ctx->bits[0];
- ((uint32 *) ctx->in)[15] = ctx->bits[1];
-
- MD5Transform(ctx->buf, (uint32 *) ctx->in);
- byteReverse((unsigned char *) ctx->buf, 4);
- memcpy(digest, ctx->buf, 16);
- memset(ctx, 0, sizeof(ctx)); /* In case it's sensitive */
-}
-
-#ifndef ASM_MD5
-
-/* The four core functions - F1 is optimized somewhat */
-
-/* #define F1(x, y, z) (x & y | ~x & z) */
-#define F1(x, y, z) (z ^ (x & (y ^ z)))
-#define F2(x, y, z) F1(z, x, y)
-#define F3(x, y, z) (x ^ y ^ z)
-#define F4(x, y, z) (y ^ (x | ~z))
-
-/* This is the central step in the MD5 algorithm. */
-#define MD5STEP(f, w, x, y, z, data, s) \
- ( w += f(x, y, z) + data, w = w<<s | w>>(32-s), w += x )
-
-/*
- * The core of the MD5 algorithm, this alters an existing MD5 hash to
- * reflect the addition of 16 longwords of new data. MD5Update blocks
- * the data and converts bytes into longwords for this routine.
- */
-void MD5Transform(uint32 buf[4], uint32 const in[16])
-{
- register uint32 a, b, c, d;
-
- a = buf[0];
- b = buf[1];
- c = buf[2];
- d = buf[3];
-
- MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
- MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
- MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
- MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
- MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
- MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
- MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
- MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
- MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
- MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
- MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
- MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
- MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
- MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
- MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
- MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
-
- MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
- MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
- MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
- MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
- MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
- MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
- MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
- MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
- MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
- MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
- MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
- MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
- MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
- MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
- MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
- MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
-
- MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
- MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
- MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
- MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
- MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
- MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
- MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
- MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
- MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
- MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
- MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
- MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
- MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
- MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
- MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
- MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
-
- MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
- MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
- MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
- MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
- MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
- MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
- MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
- MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
- MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
- MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
- MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
- MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
- MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
- MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
- MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
- MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
-
- buf[0] += a;
- buf[1] += b;
- buf[2] += c;
- buf[3] += d;
-}
-
-#endif
diff --git a/mdk-stage1/rp-pppoe/src/md5.h b/mdk-stage1/rp-pppoe/src/md5.h
deleted file mode 100644
index e264f686d..000000000
--- a/mdk-stage1/rp-pppoe/src/md5.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef MD5_H
-#define MD5_H
-
-#ifdef __alpha
-typedef unsigned int uint32;
-#else
-typedef unsigned long uint32;
-#endif
-
-struct MD5Context {
- uint32 buf[4];
- uint32 bits[2];
- unsigned char in[64];
-};
-
-void MD5Init(struct MD5Context *context);
-void MD5Update(struct MD5Context *context, unsigned char const *buf,
- unsigned len);
-void MD5Final(unsigned char digest[16], struct MD5Context *context);
-void MD5Transform(uint32 buf[4], uint32 const in[16]);
-
-/*
- * This is needed to make RSAREF happy on some MS-DOS compilers.
- */
-typedef struct MD5Context MD5_CTX;
-
-#endif /* !MD5_H */
diff --git a/mdk-stage1/rp-pppoe/src/plugin.c b/mdk-stage1/rp-pppoe/src/plugin.c
deleted file mode 100644
index d1097e291..000000000
--- a/mdk-stage1/rp-pppoe/src/plugin.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/***********************************************************************
-*
-* plugin.c
-*
-* pppd plugin for kernel-mode PPPoE on Linux
-*
-* Copyright (C) 2001 by Roaring Penguin Software Inc., Michal Ostrowski
-* and Jamal Hadi Salim.
-*
-* Much code and many ideas derived from pppoe plugin by Michal
-* Ostrowski and Jamal Hadi Salim, which carries this copyright:
-*
-* Copyright 2000 Michal Ostrowski <mostrows@styx.uwaterloo.ca>,
-* Jamal Hadi Salim <hadi@cyberus.ca>
-* Borrows heavily from the PPPoATM plugin by Mitchell Blank Jr.,
-* which is based in part on work from Jens Axboe and Paul Mackerras.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#define _GNU_SOURCE 1
-#include "pppoe.h"
-
-#include "pppd/pppd.h"
-#include "pppd/fsm.h"
-#include "pppd/lcp.h"
-#include "pppd/ipcp.h"
-#include "pppd/ccp.h"
-#include "pppd/pathnames.h"
-
-#include <linux/types.h>
-#include <syslog.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <net/ethernet.h>
-#include <net/if_arp.h>
-#include <linux/if_pppox.h>
-
-/* From sys-linux.c in pppd -- MUST FIX THIS! */
-extern int new_style_driver;
-
-static char *service = NULL;
-static char *acName = NULL;
-static char *existingSession = NULL;
-
-static option_t Options[] = {
- { "rp_pppoe_service", o_string, &service,
- "Desired PPPoE service name" },
- { "rp_pppoe_ac", o_string, &acName,
- "Desired PPPoE access concentrator name" },
- { "rp_pppoe_sess", o_string, &existingSession,
- "Attach to existing session (sessid:macaddr)" },
- { NULL }
-};
-int (*OldDevnameHook)(const char *name) = NULL;
-static PPPoEConnection *conn = NULL;
-
-/**********************************************************************
- * %FUNCTION: PPPOEInitDevice
- * %ARGUMENTS:
- * None
- * %RETURNS:
- *
- * %DESCRIPTION:
- * Initializes PPPoE device.
- ***********************************************************************/
-static int
-PPPOEInitDevice(void)
-{
- conn = malloc(sizeof(PPPoEConnection));
- if (!conn) {
- fatal("Could not allocate memory for PPPoE session");
- }
- memset(conn, 0, sizeof(PPPoEConnection));
- if (acName) {
- SET_STRING(conn->acName, acName);
- }
- if (service) {
- SET_STRING(conn->serviceName, acName);
- }
- SET_STRING(conn->ifName, devnam);
- conn->discoverySocket = -1;
- conn->sessionSocket = -1;
- conn->useHostUniq = 1;
- return 1;
-}
-
-/**********************************************************************
- * %FUNCTION: PPPOEConnectDevice
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * Non-negative if all goes well; -1 otherwise
- * %DESCRIPTION:
- * Connects PPPoE device.
- ***********************************************************************/
-static int
-PPPOEConnectDevice(void)
-{
- struct sockaddr_pppox sp;
-
- strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
- if (existingSession) {
- unsigned int mac[ETH_ALEN];
- int i, ses;
- if (sscanf(existingSession, "%d:%x:%x:%x:%x:%x:%x",
- &ses, &mac[0], &mac[1], &mac[2],
- &mac[3], &mac[4], &mac[5]) != 7) {
- fatal("Illegal value for rp_pppoe_sess option");
- }
- conn->session = htons(ses);
- for (i=0; i<ETH_ALEN; i++) {
- conn->peerEth[i] = (unsigned char) mac[i];
- }
- } else {
- discovery(conn);
- if (conn->discoveryState != STATE_SESSION) {
- fatal("Unable to complete PPPoE Discovery");
- }
- }
-
- /* Make the session socket */
- conn->sessionSocket = socket(AF_PPPOX, SOCK_STREAM, PX_PROTO_OE);
- if (conn->sessionSocket < 0) {
- fatal("Failed to create PPPoE socket: %m");
- }
- sp.sa_family = AF_PPPOX;
- sp.sa_protocol = PX_PROTO_OE;
- sp.sa_addr.pppoe.sid = conn->session;
- memcpy(sp.sa_addr.pppoe.dev, conn->ifName, IFNAMSIZ);
- memcpy(sp.sa_addr.pppoe.remote, conn->peerEth, ETH_ALEN);
- if (connect(conn->sessionSocket, (struct sockaddr *) &sp,
- sizeof(struct sockaddr_pppox)) < 0) {
- fatal("Failed to connect PPPoE socket: %d %m", errno);
- return -1;
- }
- return conn->sessionSocket;
-}
-
-static void
-PPPOESendConfig(int unit,
- int mtu,
- u_int32_t asyncmap,
- int pcomp,
- int accomp)
-{
- int sock;
- struct ifreq ifr;
-
- if (mtu > MAX_PPPOE_MTU) {
- warn("Couldn't increase MTU to %d", mtu);
- }
- sock = socket(AF_INET, SOCK_DGRAM, 0);
- if (sock < 0) {
- fatal("Couldn't create IP socket: %m");
- }
- strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
- ifr.ifr_mtu = mtu;
- if (ioctl(sock, SIOCSIFMTU, &ifr) < 0) {
- fatal("ioctl(SIOCSIFMTU): %m");
- }
- (void) close (sock);
-}
-
-
-static void
-PPPOERecvConfig(int unit,
- int mru,
- u_int32_t asyncmap,
- int pcomp,
- int accomp)
-{
- if (mru > MAX_PPPOE_MTU) {
- error("Couldn't increase MRU to %d", mru);
- }
-}
-
-static void
-PPPOESetXaccm(int unit,
- ext_accm accm)
-{
- /* Do nothing */
-}
-
-/**********************************************************************
- * %FUNCTION: PPPOEDisconnectDevice
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * Nothing
- * %DESCRIPTION:
- * Disconnects PPPoE device
- ***********************************************************************/
-static void
-PPPOEDisconnectDevice(void)
-{
- struct sockaddr_pppox sp;
-
- sp.sa_family = AF_PPPOX;
- sp.sa_protocol = PX_PROTO_OE;
- sp.sa_addr.pppoe.sid = 0;
- memcpy(sp.sa_addr.pppoe.dev, conn->ifName, IFNAMSIZ);
- memcpy(sp.sa_addr.pppoe.remote, conn->peerEth, ETH_ALEN);
- if (connect(conn->sessionSocket, (struct sockaddr *) &sp,
- sizeof(struct sockaddr_pppox)) < 0) {
- fatal("Failed to disconnect PPPoE socket: %d %m", errno);
- return;
- }
- close(conn->sessionSocket);
-}
-
-static int
-PPPOESetSpeed(const char *speed)
-{
- return 0;
-}
-
-static void
-PPPOEDeviceCheckHook(void)
-{
- if (!options_for_dev(_PATH_ETHOPT, devnam)) {
- exit(EXIT_OPTION_ERROR);
- }
-}
-
-/**********************************************************************
- * %FUNCTION: PPPoEDevnameHook
- * %ARGUMENTS:
- * name -- name of device
- * %RETURNS:
- * 1 if we will handle this device; 0 otherwise.
- * %DESCRIPTION:
- * Checks if name is a valid interface name; if so, returns 1. Also
- * sets up devnam (string representation of device) and sets devstat.st_mode
- * so S_ISCHR(devstat.st_mode) != 1 for internal pppd consumption.
- ***********************************************************************/
-static int
-PPPoEDevnameHook(const char *name)
-{
- int r = 1;
- int fd;
- struct ifreq ifr;
-
- /* Open a socket */
- if ((fd = socket(PF_PACKET, SOCK_RAW, 0)) < 0) {
- r = 0;
- }
-
- /* Try getting interface index */
- if (r) {
- strncpy(ifr.ifr_name, name, sizeof(ifr.ifr_name));
- if (ioctl(fd, SIOCGIFINDEX, &ifr) < 0) {
- r = 0;
- } else {
- if (ioctl(fd, SIOCGIFHWADDR, &ifr) < 0) {
- r = 0;
- } else {
- if (ifr.ifr_hwaddr.sa_family != ARPHRD_ETHER) {
- error("Interface %s not Ethernet", name);
- r=0;
- }
- }
- }
- }
-
- /* Close socket */
- close(fd);
- if (r) {
- strncpy(devnam, name, sizeof(devnam));
- if (device_check_hook != PPPOEDeviceCheckHook) {
- devstat.st_mode = S_IFSOCK;
- device_init_hook = PPPOEInitDevice;
- setspeed_hook = PPPOESetSpeed;
- device_check_hook = PPPOEDeviceCheckHook;
- connect_device_hook = PPPOEConnectDevice;
- disconnect_device_hook = PPPOEDisconnectDevice;
- send_config_hook = PPPOESendConfig;
- recv_config_hook = PPPOERecvConfig;
- set_xaccm_hook = PPPOESetXaccm;
- modem = 0;
-
- lcp_allowoptions[0].neg_accompression = 0;
- lcp_wantoptions[0].neg_accompression = 0;
-
- lcp_allowoptions[0].neg_asyncmap = 0;
- lcp_wantoptions[0].neg_asyncmap = 0;
-
- lcp_allowoptions[0].neg_pcompression = 0;
- lcp_wantoptions[0].neg_pcompression = 0;
-
- ccp_allowoptions[0].deflate = 0 ;
- ccp_wantoptions[0].deflate = 0 ;
-
- ipcp_allowoptions[0].neg_vj=0;
- ipcp_wantoptions[0].neg_vj=0;
-
- ccp_allowoptions[0].bsd_compress = 0;
- ccp_wantoptions[0].bsd_compress = 0;
-
- PPPOEInitDevice();
- }
- return 1;
- }
-
- if (OldDevnameHook) r = OldDevnameHook(name);
- return r;
-}
-
-/**********************************************************************
- * %FUNCTION: plugin_init
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * Nothing
- * %DESCRIPTION:
- * Initializes hooks for pppd plugin
- ***********************************************************************/
-void
-plugin_init(void)
-{
- if (!new_style_driver) {
- fatal("Linux kernel does not support PPPoE -- are you running 2.4.x?");
- }
- OldDevnameHook = setdevname_hook;
- setdevname_hook = PPPoEDevnameHook;
- add_options(Options);
-
- info("Roaring Penguin PPPoE Plugin Initialized");
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
- char buf[1024];
- int i = errno;
- sprintf(buf, "%.256s: %.256s", str, strerror(i));
- printErr(buf);
- sprintf(buf, "RP-PPPoE: %.256s: %.256s", str, strerror(i));
- sendPADT(conn, buf);
- exit(1);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
- char buf[1024];
- printErr(str);
- sprintf(buf, "RP-PPPoE: %.256s", str);
- sendPADT(conn, buf);
- exit(1);
-}
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
- rp_fatal(str);
-}
diff --git a/mdk-stage1/rp-pppoe/src/ppp.c b/mdk-stage1/rp-pppoe/src/ppp.c
deleted file mode 100644
index 72020a76c..000000000
--- a/mdk-stage1/rp-pppoe/src/ppp.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/***********************************************************************
-*
-* ppp.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Functions for talking to PPP daemon
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_N_HDLC
-#ifndef N_HDLC
-#include <linux/termios.h>
-#endif
-#endif
-
-int PPPState;
-int PPPPacketSize;
-unsigned char PPPXorValue;
-
-UINT16_t fcstab[256] = {
- 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
- 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
- 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
- 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
- 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
- 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
- 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
- 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
- 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
- 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
- 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
- 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
- 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
- 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
- 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
- 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
- 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
- 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
- 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
- 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
- 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
- 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
- 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
- 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
- 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
- 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
- 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
- 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
- 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
- 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
- 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
- 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-/**********************************************************************
-*%FUNCTION: syncReadFromPPP
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-* packet -- buffer in which to place PPPoE packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads from a synchronous PPP device and builds and transmits a PPPoE
-* packet
-***********************************************************************/
-void
-syncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet)
-{
- int r;
-#ifndef HAVE_N_HDLC
- struct iovec vec[2];
- unsigned char dummy[2];
- vec[0].iov_base = (void *) dummy;
- vec[0].iov_len = 2;
- vec[1].iov_base = (void *) packet->payload;
- vec[1].iov_len = ETH_DATA_LEN - PPPOE_OVERHEAD;
-
- /* Use scatter-read to throw away the PPP frame address bytes */
- r = readv(0, vec, 2);
-#else
- /* Bloody hell... readv doesn't work with N_HDLC line discipline... GRR! */
- unsigned char buf[ETH_DATA_LEN - PPPOE_OVERHEAD + 2];
- r = read(0, buf, ETH_DATA_LEN - PPPOE_OVERHEAD + 2);
- if (r >= 2) {
- memcpy(packet->payload, buf+2, r-2);
- }
-#endif
- if (r < 0) {
- /* Catch the Linux "select" bug */
- if (errno == EAGAIN) {
- rp_fatal("Linux select bug hit! This message is harmless, but please ask the Linux kernel developers to fix it.");
- }
- fatalSys("read (syncReadFromPPP)");
- }
- if (r == 0) {
- syslog(LOG_INFO, "end-of-file in syncReadFromPPP");
- sendPADT(conn, "RP-PPPoE: EOF in syncReadFromPPP");
- exit(0);
- }
-
- if (r < 2) {
- rp_fatal("too few characters read from PPP (syncReadFromPPP)");
- }
-
- sendSessionPacket(conn, packet, r-2);
-}
-
-/**********************************************************************
-*%FUNCTION: initPPP
-*%ARGUMENTS:
-* None
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Initializes the PPP state machine
-***********************************************************************/
-void
-initPPP(void)
-{
- PPPState = STATE_WAITFOR_FRAME_ADDR;
- PPPPacketSize = 0;
- PPPXorValue = 0;
-
-}
-/**********************************************************************
-*%FUNCTION: asyncReadFromPPP
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-* packet -- buffer in which to place PPPoE packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads from an async PPP device and builds a PPPoE packet to transmit
-***********************************************************************/
-void
-asyncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet)
-{
- unsigned char buf[READ_CHUNK];
- unsigned char *ptr = buf;
- unsigned char c;
-
- int r;
-
- r = read(0, buf, READ_CHUNK);
- if (r < 0) {
- fatalSys("read (asyncReadFromPPP)");
- }
-
- if (r == 0) {
- syslog(LOG_INFO, "end-of-file in asyncReadFromPPP");
- sendPADT(conn, "RP-PPPoE: EOF in asyncReadFromPPP");
- exit(0);
- }
-
- while(r) {
- if (PPPState == STATE_WAITFOR_FRAME_ADDR) {
- while(r) {
- --r;
- if (*ptr++ == FRAME_ADDR) {
- PPPState = STATE_DROP_PROTO;
- break;
- }
- }
- }
-
- /* Still waiting... */
- if (PPPState == STATE_WAITFOR_FRAME_ADDR) return;
-
- while(r && PPPState == STATE_DROP_PROTO) {
- --r;
- if (*ptr++ == (FRAME_CTRL ^ FRAME_ENC)) {
- PPPState = STATE_BUILDING_PACKET;
- }
- }
-
- if (PPPState == STATE_DROP_PROTO) return;
-
- /* Start building frame */
- while(r && PPPState == STATE_BUILDING_PACKET) {
- --r;
- c = *ptr++;
- switch(c) {
- case FRAME_ESC:
- PPPXorValue = FRAME_ENC;
- break;
- case FRAME_FLAG:
- if (PPPPacketSize < 2) {
- rp_fatal("Packet too short from PPP (asyncReadFromPPP)");
- }
- sendSessionPacket(conn, packet, PPPPacketSize-2);
- PPPPacketSize = 0;
- PPPXorValue = 0;
- PPPState = STATE_WAITFOR_FRAME_ADDR;
- break;
- default:
- if (PPPPacketSize >= ETH_DATA_LEN - 4) {
- syslog(LOG_ERR, "Packet too big! Check MTU on PPP interface");
- PPPPacketSize = 0;
- PPPXorValue = 0;
- PPPState = STATE_WAITFOR_FRAME_ADDR;
- } else {
- packet->payload[PPPPacketSize++] = c ^ PPPXorValue;
- PPPXorValue = 0;
- }
- }
- }
- }
-}
-
-/**********************************************************************
-*%FUNCTION: pppFCS16
-*%ARGUMENTS:
-* fcs -- current fcs
-* cp -- a buffer's worth of data
-* len -- length of buffer "cp"
-*%RETURNS:
-* A new FCS
-*%DESCRIPTION:
-* Updates the PPP FCS.
-***********************************************************************/
-UINT16_t
-pppFCS16(UINT16_t fcs,
- unsigned char * cp,
- int len)
-{
- while (len--)
- fcs = (fcs >> 8) ^ fcstab[(fcs ^ *cp++) & 0xff];
-
- return (fcs);
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/pppoe-server.c b/mdk-stage1/rp-pppoe/src/pppoe-server.c
deleted file mode 100644
index e43e63553..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe-server.c
+++ /dev/null
@@ -1,1247 +0,0 @@
-/***********************************************************************
-*
-* pppoe.h
-*
-* Implementation of a user-space PPPoE server
-*
-* Copyright (C) 2000 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "config.h"
-
-#if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
-#define _POSIX_SOURCE 1 /* For sigaction defines */
-#endif
-
-#define _BSD_SOURCE 1 /* for gethostname */
-
-#include "pppoe.h"
-#include "md5.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#ifdef HAVE_SYS_WAIT_H
-#include <sys/wait.h>
-#endif
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#include <signal.h>
-
-/* Hack for daemonizing */
-#define CLOSEFD 64
-
-/* Max. 64 sessions by default */
-#define DEFAULT_MAX_SESSIONS 64
-
-/* A list of client sessions */
-struct ClientSession *Sessions = NULL;
-
-/* The number of session slots */
-size_t NumSessionSlots;
-
-/* Offset of first session */
-size_t SessOffset = 0;
-
-/* Socket for client's discovery phases */
-int Socket = -1;
-
-/* Pipe written on reception of SIGCHLD */
-int Pipe[2] = {-1, -1};
-int ReapPending = 0;
-
-/* Synchronous mode */
-int Synchronous = 0;
-
-/* Random seed for cookie generation */
-#define SEED_LEN 16
-#define MD5_LEN 16
-#define COOKIE_LEN (MD5_LEN + sizeof(pid_t)) /* Cookie is 16-byte MD5 + PID of server */
-
-unsigned char CookieSeed[SEED_LEN];
-
-/* Default interface if no -I option given */
-#define DEFAULT_IF "eth0"
-char *IfName = NULL;
-
-/* Access concentrator name */
-char *ACName = NULL;
-
-/* Options to pass to pppoe process */
-char PppoeOptions[SMALLBUF] = "";
-
-/* Our local IP address */
-unsigned char LocalIP[IPV4ALEN] = {10, 0, 0, 1};
-unsigned char RemoteIP[IPV4ALEN] = {10, 67, 15, 1}; /* Counter STARTS here */
-
-PPPoETag hostUniq;
-PPPoETag relayId;
-PPPoETag receivedCookie;
-PPPoETag requestedService;
-
-#define HOSTNAMELEN 256
-
-static void startPPPD(struct ClientSession *sess);
-static void sendErrorPADS(int sock, unsigned char *source, unsigned char *dest,
- int errorTag, char *errorMsg);
-
-#define CHECK_ROOM(cursor, start, len) \
-do {\
- if (((cursor)-(start))+(len) > MAX_PPPOE_PAYLOAD) { \
- syslog(LOG_ERR, "Would create too-long packet"); \
- return; \
- } \
-} while(0)
-
-/* Use Linux kernel-mode PPPoE? */
-int UseLinuxKernelModePPPoE = 0;
-
-/**********************************************************************
-*%FUNCTION: parseAddressPool
-*%ARGUMENTS:
-* fname -- name of file containing IP address pool.
-* install -- if true, install IP addresses in sessions.
-*%RETURNS:
-* Number of valid IP addresses found.
-*%DESCRIPTION:
-* Reads a list of IP addresses from a file.
-***********************************************************************/
-static int
-parseAddressPool(char const *fname, int install)
-{
- FILE *fp = fopen(fname, "r");
- int numAddrs = 0;
- unsigned int a, b, c, d;
-
- if (!fp) {
- sysErr("Cannot open address pool file");
- }
-
- while (!feof(fp)) {
- if ((fscanf(fp, "%u.%u.%u.%u", &a, &b, &c, &d) == 4) &&
- a < 256 && b < 256 && c < 256 && d < 256) {
- if (install) {
- Sessions[numAddrs].ip[0] = (unsigned char) a;
- Sessions[numAddrs].ip[1] = (unsigned char) b;
- Sessions[numAddrs].ip[2] = (unsigned char) c;
- Sessions[numAddrs].ip[3] = (unsigned char) d;
- }
- numAddrs++;
- }
- }
- if (!numAddrs) {
- rp_fatal("No valid ip addresses found in pool file");
- }
- return numAddrs;
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADITags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADI packet
-***********************************************************************/
-void
-parsePADITags(UINT16_t type, UINT16_t len, unsigned char *data,
- void *extra)
-{
- switch(type) {
- case TAG_SERVICE_NAME:
- /* Should do something -- currently ignored */
- break;
- case TAG_RELAY_SESSION_ID:
- relayId.type = htons(type);
- relayId.length = htons(len);
- memcpy(relayId.payload, data, len);
- break;
- case TAG_HOST_UNIQ:
- hostUniq.type = htons(type);
- hostUniq.length = htons(len);
- memcpy(hostUniq.payload, data, len);
- break;
- }
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADRTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADR packet
-***********************************************************************/
-void
-parsePADRTags(UINT16_t type, UINT16_t len, unsigned char *data,
- void *extra)
-{
- switch(type) {
- case TAG_RELAY_SESSION_ID:
- relayId.type = htons(type);
- relayId.length = htons(len);
- memcpy(relayId.payload, data, len);
- break;
- case TAG_HOST_UNIQ:
- hostUniq.type = htons(type);
- hostUniq.length = htons(len);
- memcpy(hostUniq.payload, data, len);
- break;
- case TAG_AC_COOKIE:
- receivedCookie.type = htons(type);
- receivedCookie.length = htons(len);
- memcpy(receivedCookie.payload, data, len);
- break;
- case TAG_SERVICE_NAME:
- requestedService.type = htons(type);
- requestedService.length = htons(len);
- memcpy(requestedService.payload, data, len);
- break;
- }
-}
-
-/**********************************************************************
-*%FUNCTION: findSession
-*%ARGUMENTS:
-* pid -- PID of child which owns session. If PID is 0, searches for
-* empty session slots.
-*%RETURNS:
-* A pointer to the session, or NULL if no such session found.
-*%DESCRIPTION:
-* Searches for specified session.
-**********************************************************************/
-struct ClientSession *
-findSession(pid_t pid)
-{
- size_t i;
- for (i=0; i<NumSessionSlots; i++) {
- if (Sessions[i].pid == pid) {
- return &Sessions[i];
- }
- }
- return NULL;
-}
-
-/**********************************************************************
-*%FUNCTION: reapSessions
-*%ARGUMENTS:
-* myAddr -- my Ethernet address
-* sock -- my discovery socket
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reaps children which have exited and removes their sessions
-**********************************************************************/
-void
-reapSessions(unsigned char *myAddr, int sock)
-{
- int status;
- pid_t pid;
- struct ClientSession *session;
-
- /* Temporary structure for sending PADT's. */
- PPPoEConnection conn;
- memset(&conn, 0, sizeof(conn));
-
- /* Initialize fields of conn which do not depend on peer */
- memcpy(conn.myEth, myAddr, ETH_ALEN);
- conn.useHostUniq = 0;
- conn.discoverySocket = sock;
-
- while((pid = waitpid(-1, &status, WNOHANG)) > 0) {
- session = findSession(pid);
- if (!session) {
- syslog(LOG_ERR, "Child %d died but couldn't find session!",
- (int) pid);
- } else {
- syslog(LOG_INFO,
- "Session %d closed for client %02x:%02x:%02x:%02x:%02x:%02x (%d.%d.%d.%d)",
- ntohs(session->sess),
- session->eth[0], session->eth[1], session->eth[2],
- session->eth[3], session->eth[4], session->eth[5],
- (int) session->ip[0], (int) session->ip[1],
- (int) session->ip[2], (int) session->ip[3]);
- conn.session = session->sess;
- memcpy(conn.peerEth, session->eth, ETH_ALEN);
- if (session->recvdPADT) {
- sendPADT(&conn, "RP-PPPoE: Received PADT from peer");
- } else {
- sendPADT(&conn, "RP-PPPoE: Child pppd process terminated");
- }
- session->pid = 0;
- }
- }
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
- char buf[SMALLBUF];
- snprintf(buf, SMALLBUF, "%s: %s", str, strerror(errno));
- printErr(buf);
- exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
- char buf[1024];
- sprintf(buf, "%.256s: %.256s", str, strerror(errno));
- printErr(buf);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
- printErr(str);
- exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: genCookie
-*%ARGUMENTS:
-* peerEthAddr -- peer Ethernet address (6 bytes)
-* myEthAddr -- my Ethernet address (6 bytes)
-* seed -- random cookie seed to make things tasty (16 bytes)
-* cookie -- buffer which is filled with server PID and
-* md5 sum of previous items
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Forms the md5 sum of peer MAC address, our MAC address and seed, useful
-* in a PPPoE Cookie tag.
-***********************************************************************/
-void
-genCookie(unsigned char const *peerEthAddr,
- unsigned char const *myEthAddr,
- unsigned char const *seed,
- unsigned char *cookie)
-{
- struct MD5Context ctx;
- pid_t pid = getpid();
-
- MD5Init(&ctx);
- MD5Update(&ctx, peerEthAddr, ETH_ALEN);
- MD5Update(&ctx, myEthAddr, ETH_ALEN);
- MD5Update(&ctx, seed, SEED_LEN);
- MD5Final(cookie, &ctx);
- memcpy(cookie+MD5_LEN, &pid, sizeof(pid));
-}
-
-/**********************************************************************
-*%FUNCTION: processPADI
-*%ARGUMENTS:
-* sock -- Ethernet socket
-* myAddr -- my Ethernet address
-* packet -- PPPoE PADI packet
-* len -- length of received packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADO packet back to client
-***********************************************************************/
-void
-processPADI(int sock, unsigned char *myAddr,
- PPPoEPacket *packet, int len)
-{
- PPPoEPacket pado;
- PPPoETag acname;
- PPPoETag servname;
- PPPoETag cookie;
- size_t acname_len;
- unsigned char *cursor = pado.payload;
- UINT16_t plen;
-
- /* Ignore PADI's which don't come from a unicast address */
- if (NOT_UNICAST(packet->ethHdr.h_source)) {
- syslog(LOG_ERR, "PADI packet from non-unicast source address");
- return;
- }
-
- acname.type = htons(TAG_AC_NAME);
- acname_len = strlen(ACName);
- acname.length = htons(acname_len);
- memcpy(acname.payload, ACName, acname_len);
-
- servname.type = htons(TAG_SERVICE_NAME);
- servname.length = 0;
-
- relayId.type = 0;
- hostUniq.type = 0;
- parsePacket(packet, parsePADITags, NULL);
-
- /* Generate a cookie */
- cookie.type = htons(TAG_AC_COOKIE);
- cookie.length = htons(COOKIE_LEN);
- genCookie(packet->ethHdr.h_source, myAddr, CookieSeed, cookie.payload);
-
- /* Construct a PADO packet */
- memcpy(pado.ethHdr.h_dest, packet->ethHdr.h_source, ETH_ALEN);
- memcpy(pado.ethHdr.h_source, myAddr, ETH_ALEN);
- pado.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
- pado.ver = 1;
- pado.type = 1;
- pado.code = CODE_PADO;
- pado.session = 0;
- plen = TAG_HDR_SIZE + acname_len;
-
- CHECK_ROOM(cursor, pado.payload, acname_len+TAG_HDR_SIZE);
- memcpy(cursor, &acname, acname_len + TAG_HDR_SIZE);
- cursor += acname_len + TAG_HDR_SIZE;
-
- CHECK_ROOM(cursor, pado.payload, TAG_HDR_SIZE);
- memcpy(cursor, &servname, TAG_HDR_SIZE);
- cursor += TAG_HDR_SIZE;
- plen += TAG_HDR_SIZE;
-
- CHECK_ROOM(cursor, pado.payload, TAG_HDR_SIZE + COOKIE_LEN);
- memcpy(cursor, &cookie, TAG_HDR_SIZE + COOKIE_LEN);
- cursor += TAG_HDR_SIZE + COOKIE_LEN;
- plen += TAG_HDR_SIZE + COOKIE_LEN;
-
- if (relayId.type) {
- CHECK_ROOM(cursor, pado.payload, ntohs(relayId.length) + TAG_HDR_SIZE);
- memcpy(cursor, &relayId, ntohs(relayId.length) + TAG_HDR_SIZE);
- cursor += ntohs(relayId.length) + TAG_HDR_SIZE;
- plen += ntohs(relayId.length) + TAG_HDR_SIZE;
- }
- if (hostUniq.type) {
- CHECK_ROOM(cursor, pado.payload, ntohs(hostUniq.length)+TAG_HDR_SIZE);
- memcpy(cursor, &hostUniq, ntohs(hostUniq.length) + TAG_HDR_SIZE);
- cursor += ntohs(hostUniq.length) + TAG_HDR_SIZE;
- plen += ntohs(hostUniq.length) + TAG_HDR_SIZE;
- }
- pado.length = htons(plen);
- sendPacket(NULL, sock, &pado, (int) (plen + HDR_SIZE));
-}
-
-/**********************************************************************
-*%FUNCTION: processPADT
-*%ARGUMENTS:
-* sock -- Ethernet socket
-* myAddr -- my Ethernet address
-* packet -- PPPoE PADT packet
-* len -- length of received packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Kills session whose session-ID is in PADT packet.
-***********************************************************************/
-void
-processPADT(int sock, unsigned char *myAddr,
- PPPoEPacket *packet, int len)
-{
- size_t i;
-
- /* Ignore PADT's not directed at us */
- if (memcmp(packet->ethHdr.h_dest, myAddr, ETH_ALEN)) return;
-
- /* Get session's index */
- i = ntohs(packet->session) - 1 - SessOffset;
- if (i >= NumSessionSlots) return;
- if (Sessions[i].sess != packet->session) {
- syslog(LOG_ERR, "Session index %u doesn't match session number %u",
- (unsigned int) i, (unsigned int) ntohs(packet->session));
- return;
- }
- if (Sessions[i].pid) {
- Sessions[i].recvdPADT = 1;
- parsePacket(packet, parseLogErrs, NULL);
- kill(Sessions[i].pid, SIGTERM);
- }
-}
-
-/**********************************************************************
-*%FUNCTION: processPADR
-*%ARGUMENTS:
-* sock -- Ethernet socket
-* myAddr -- my Ethernet address
-* packet -- PPPoE PADR packet
-* len -- length of received packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADS packet back to client and starts a PPP session if PADR
-* packet is OK.
-***********************************************************************/
-void
-processPADR(int sock, unsigned char *myAddr,
- PPPoEPacket *packet, int len)
-{
- unsigned char cookieBuffer[COOKIE_LEN];
- struct ClientSession *cliSession;
- pid_t child;
- PPPoEPacket pads;
- unsigned char *cursor = pads.payload;
- UINT16_t plen;
- PPPoETag servname;
-
- /* Initialize some globals */
- relayId.type = 0;
- hostUniq.type = 0;
- receivedCookie.type = 0;
- requestedService.type = 0;
-
- /* Ignore PADR's not directed at us */
- if (memcmp(packet->ethHdr.h_dest, myAddr, ETH_ALEN)) return;
-
- /* Ignore PADR's from non-unicast addresses */
- if (NOT_UNICAST(packet->ethHdr.h_source)) {
- syslog(LOG_ERR, "PADR packet from non-unicast source address");
- return;
- }
-
- parsePacket(packet, parsePADRTags, NULL);
-
- /* Check that everything's cool */
- if (!receivedCookie.type) {
- /* Drop it -- do not send error PADS */
- return;
- }
-
- /* Is cookie kosher? */
- if (receivedCookie.length != htons(COOKIE_LEN)) {
- /* Drop it -- do not send error PADS */
- return;
- }
-
- genCookie(packet->ethHdr.h_source, myAddr, CookieSeed, cookieBuffer);
- if (memcmp(receivedCookie.payload, cookieBuffer, COOKIE_LEN)) {
- /* Drop it -- do not send error PADS */
- return;
- }
-
- /* Check service name -- we only offer service "" */
- if (!requestedService.type) {
- syslog(LOG_ERR, "Received PADR packet with no SERVICE_NAME tag");
- sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
- TAG_SERVICE_NAME_ERROR, "RP-PPPoE: Server: No service name tag");
- return;
- }
-
- if (requestedService.length) {
- syslog(LOG_ERR, "Received PADR packet asking for unsupported service %.*s", (int) ntohs(requestedService.length), requestedService.payload);
- sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
- TAG_SERVICE_NAME_ERROR, "RP-PPPoE: Server: Invalid service name tag");
- return;
- }
-
- /* Looks cool... find a slot for the session */
- cliSession = findSession(0);
- if (!cliSession) {
- syslog(LOG_ERR, "No client slots available (%02x:%02x:%02x:%02x:%02x:%02x)",
- (unsigned int) packet->ethHdr.h_source[0],
- (unsigned int) packet->ethHdr.h_source[1],
- (unsigned int) packet->ethHdr.h_source[2],
- (unsigned int) packet->ethHdr.h_source[3],
- (unsigned int) packet->ethHdr.h_source[4],
- (unsigned int) packet->ethHdr.h_source[5]);
- sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
- TAG_AC_SYSTEM_ERROR, "RP-PPPoE: Server: No client slots available");
- return;
- }
-
- /* Set up client session peer Ethernet address */
- memcpy(cliSession->eth, packet->ethHdr.h_source, ETH_ALEN);
- cliSession->recvdPADT = 0;
-
- /* Create child process, send PADS packet back */
- child = fork();
- if (child < 0) {
- sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
- TAG_AC_SYSTEM_ERROR, "RP-PPPoE: Server: Unable to start session process");
- return;
- }
- if (child != 0) {
- /* In the parent process. Mark pid in session slot */
- cliSession->pid = child;
- return;
- }
-
- /* In the child process. */
-
- /* pppd has a nasty habit of killing all processes in its process group.
- Start a new session to stop pppd from killing us! */
- setsid();
-
- /* Send PADS and Start pppd */
- memcpy(pads.ethHdr.h_dest, packet->ethHdr.h_source, ETH_ALEN);
- memcpy(pads.ethHdr.h_source, myAddr, ETH_ALEN);
- pads.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
- pads.ver = 1;
- pads.type = 1;
- pads.code = CODE_PADS;
-
- pads.session = cliSession->sess;
- plen = 0;
-
- servname.type = htons(TAG_SERVICE_NAME);
- servname.length = 0;
-
- memcpy(cursor, &servname, TAG_HDR_SIZE);
- cursor += TAG_HDR_SIZE;
- plen += TAG_HDR_SIZE;
-
- if (relayId.type) {
- memcpy(cursor, &relayId, ntohs(relayId.length) + TAG_HDR_SIZE);
- cursor += ntohs(relayId.length) + TAG_HDR_SIZE;
- plen += ntohs(relayId.length) + TAG_HDR_SIZE;
- }
- if (hostUniq.type) {
- memcpy(cursor, &hostUniq, ntohs(hostUniq.length) + TAG_HDR_SIZE);
- cursor += ntohs(hostUniq.length) + TAG_HDR_SIZE;
- plen += ntohs(hostUniq.length) + TAG_HDR_SIZE;
- }
- pads.length = htons(plen);
- sendPacket(NULL, sock, &pads, (int) (plen + HDR_SIZE));
- startPPPD(cliSession);
-}
-
-/**********************************************************************
-*%FUNCTION: childHandler
-*%ARGUMENTS:
-* sig -- signal number
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Called by SIGCHLD. Writes one byte to Pipe to wake up the select
-* loop and cause reaping of dead sessions
-***********************************************************************/
-void
-childHandler(int sig)
-{
- if (!ReapPending) {
- ReapPending = 1;
- write(Pipe[1], &ReapPending, 1);
- }
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- argv[0] from main
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage instructions
-***********************************************************************/
-void
-usage(char const *argv0)
-{
- fprintf(stderr, "Usage: %s [options]\n", argv0);
- fprintf(stderr, "Options:\n");
-#ifdef USE_BPF
- fprintf(stderr, " -I if_name -- Specify interface (REQUIRED)\n");
-#else
- fprintf(stderr, " -I if_name -- Specify interface (default %s.)\n",
- DEFAULT_IF);
-#endif
- fprintf(stderr, " -T timeout -- Specify inactivity timeout in seconds.\n");
- fprintf(stderr, " -C name -- Set access concentrator name.\n");
- fprintf(stderr, " -m MSS -- Clamp incoming and outgoing MSS options.\n");
- fprintf(stderr, " -L ip -- Set local IP address.\n");
- fprintf(stderr, " -R ip -- Set start address of remote IP pool.\n");
- fprintf(stderr, " -p fname -- Optain IP address pool from specified file.\n");
- fprintf(stderr, " -N num -- Allow 'num' concurrent sessions.\n");
- fprintf(stderr, " -o offset -- Assign session numbers starting at offset+1.\n");
- fprintf(stderr, " -f disc:sess -- Set Ethernet frame types (hex).\n");
- fprintf(stderr, " -s -- Use synchronous PPP mode.\n");
-#ifdef HAVE_LINUX_KERNEL_PPPOE
- fprintf(stderr, " -k -- Use kernel-mode PPPoE.\n");
-#endif
- fprintf(stderr, " -h -- Print usage information.\n\n");
- fprintf(stderr, "PPPoE-Server Version %s, Copyright (C) 2001 Roaring Penguin Software Inc.\n", VERSION);
- fprintf(stderr, "PPPoE-Server comes with ABSOLUTELY NO WARRANTY.\n");
- fprintf(stderr, "This is free software, and you are welcome to redistribute it\n");
- fprintf(stderr, "under the terms of the GNU General Public License, version 2\n");
- fprintf(stderr, "or (at your option) any later version.\n");
- fprintf(stderr, "http://www.roaringpenguin.com\n");
-}
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- usual suspects
-*%RETURNS:
-* Exit status
-*%DESCRIPTION:
-* Main program of PPPoE server
-***********************************************************************/
-int
-main(int argc, char **argv)
-{
-
- FILE *fp;
- int i;
- int opt;
- unsigned char myAddr[ETH_ALEN];
- PPPoEPacket packet;
- int len;
- int sock;
- int d[IPV4ALEN];
- int beDaemon = 1;
- struct sigaction act;
- int maxFD;
- unsigned int discoveryType, sessionType;
- char *addressPoolFname = NULL;
-
-#ifndef HAVE_LINUX_KERNEL_PPPOE
- char *options = "hI:C:L:R:T:m:FN:f:o:sp:";
-#else
- char *options = "hI:C:L:R:T:m:FN:f:o:skp:";
-#endif
-
- /* Initialize syslog */
- openlog("pppoe-server", LOG_PID, LOG_DAEMON);
-
- /* Default number of session slots */
- NumSessionSlots = DEFAULT_MAX_SESSIONS;
-
- /* Parse command-line options */
- while((opt = getopt(argc, argv, options)) != -1) {
- switch(opt) {
-#ifdef HAVE_LINUX_KERNEL_PPPOE
- case 'k':
- UseLinuxKernelModePPPoE = 1;
- break;
-#endif
- case 'p':
- addressPoolFname = optarg;
- break;
- case 's':
- Synchronous = 1;
- /* Pass the Synchronous option on to pppoe */
- snprintf(PppoeOptions + strlen(PppoeOptions),
- SMALLBUF-strlen(PppoeOptions),
- " -s");
- break;
- case 'f':
- if (sscanf(optarg, "%x:%x", &discoveryType, &sessionType) != 2) {
- fprintf(stderr, "Illegal argument to -f: Should be disc:sess in hex\n");
- exit(EXIT_FAILURE);
- }
- Eth_PPPOE_Discovery = (UINT16_t) discoveryType;
- Eth_PPPOE_Session = (UINT16_t) sessionType;
- /* This option gets passed to pppoe */
- snprintf(PppoeOptions + strlen(PppoeOptions),
- SMALLBUF-strlen(PppoeOptions),
- " -%c %s", opt, optarg);
- break;
- case 'F':
- beDaemon = 0;
- break;
- case 'N':
- if (sscanf(optarg, "%d", &opt) != 1) {
- usage(argv[0]);
- exit(EXIT_FAILURE);
- }
- if (opt <= 0) {
- fprintf(stderr, "-N: Value must be positive\n");
- exit(EXIT_FAILURE);
- }
- NumSessionSlots = opt;
- break;
- case 'o':
- if (sscanf(optarg, "%d", &opt) != 1) {
- usage(argv[0]);
- exit(EXIT_FAILURE);
- }
- if (opt < 0) {
- fprintf(stderr, "-o: Value must be non-negative\n");
- exit(EXIT_FAILURE);
- }
- SessOffset = (size_t) opt;
- break;
-
- case 'I':
- SET_STRING(IfName, optarg);
- break;
- case 'C':
- SET_STRING(ACName, optarg);
- break;
- case 'L':
- case 'R':
- /* Get local/remote IP address */
- if (sscanf(optarg, "%d.%d.%d.%d", &d[0], &d[1], &d[2], &d[3]) != 4) {
- usage(argv[0]);
- exit(EXIT_FAILURE);
- }
- for (i=0; i<IPV4ALEN; i++) {
- if (d[i] < 0 || d[i] > 255) {
- usage(argv[0]);
- exit(EXIT_FAILURE);
- }
- if (opt == 'L') {
- LocalIP[i] = (unsigned char) d[i];
- } else {
- RemoteIP[i] = (unsigned char) d[i];
- }
- }
- break;
- case 'T':
- case 'm':
- /* These just get passed to pppoe */
- snprintf(PppoeOptions + strlen(PppoeOptions),
- SMALLBUF-strlen(PppoeOptions),
- " -%c %s", opt, optarg);
- break;
- case 'h':
- usage(argv[0]);
- exit(EXIT_SUCCESS);
- }
- }
-
-#ifdef USE_LINUX_PACKET
-#ifndef HAVE_STRUCT_SOCKADDR_LL
- fprintf(stderr, "The PPPoE relay does not work on Linux 2.0 kernels.\n");
- exit(EXIT_FAILURE);
-#endif
-#endif
-
- if (!IfName) {
- IfName = DEFAULT_IF;
- }
-
- if (!ACName) {
- ACName = malloc(HOSTNAMELEN);
- if (gethostname(ACName, HOSTNAMELEN) < 0) {
- fatalSys("gethostname");
- }
- }
-
- /* If address pool filename given, count number of addresses */
- if (addressPoolFname) {
- NumSessionSlots = parseAddressPool(addressPoolFname, 0);
- }
-
- /* Max 65534 - SessOffset sessions */
- if (NumSessionSlots + SessOffset > 65534) {
- fprintf(stderr, "-N and -o options must add up to at most 65534\n");
- exit(EXIT_FAILURE);
- }
-
- /* Allocate memory for sessions */
- Sessions = calloc(NumSessionSlots, sizeof(struct ClientSession));
- if (!Sessions) {
- rp_fatal("Cannot allocate memory for session slots");
- }
-
- /* Fill in remote IP addresses from pool */
- if (addressPoolFname) {
- (void) parseAddressPool(addressPoolFname, 1);
- }
-
- /* For testing -- generate sequential remote IP addresses */
- for(i=0; i<NumSessionSlots; i++) {
- Sessions[i].pid = 0;
- Sessions[i].sess = htons(i+1+SessOffset);
-
- if (!addressPoolFname) {
- memcpy(Sessions[i].ip, RemoteIP, sizeof(RemoteIP));
-
- /* Increment IP */
- RemoteIP[3]++;
- if (!RemoteIP[3]) {
- RemoteIP[3] = 0;
- RemoteIP[2]++;
- if (!RemoteIP[2]) {
- RemoteIP[1]++;
- if (!RemoteIP[1]) {
- RemoteIP[0]++;
- }
- }
- }
- }
- }
-
- /* Daemonize -- UNIX Network Programming, Vol. 1, Stevens */
- if (beDaemon) {
- i = fork();
- if (i < 0) {
- fatalSys("fork");
- } else if (i != 0) {
- /* parent */
- exit(EXIT_SUCCESS);
- }
- setsid();
- signal(SIGHUP, SIG_IGN);
- i = fork();
- if (i < 0) {
- fatalSys("fork");
- } else if (i != 0) {
- exit(EXIT_SUCCESS);
- }
-
- chdir("/");
- closelog();
- for (i=0; i<CLOSEFD; i++) close(i);
- /* We nuked our syslog descriptor... */
- openlog("pppoe-server", LOG_PID, LOG_DAEMON);
- }
-
- /* Initialize our random cookie. Try /dev/urandom; if that fails,
- use PID and rand() */
- fp = fopen("/dev/urandom", "r");
- if (fp) {
- fread(&CookieSeed, 1, SEED_LEN, fp);
- fclose(fp);
- } else {
- CookieSeed[0] = getpid() & 0xFF;
- CookieSeed[1] = (getpid() >> 8) & 0xFF;
- for (i=2; i<SEED_LEN; i++) {
- CookieSeed[i] = (rand() >> (i % 9)) & 0xFF;
- }
- }
-
- sock = openInterface(IfName, Eth_PPPOE_Discovery, myAddr);
-
- /* Set signal handler for SIGCHLD */
- act.sa_handler = childHandler;
- sigemptyset(&act.sa_mask);
- act.sa_flags = SA_NOCLDSTOP | SA_RESTART;
- if (sigaction(SIGCHLD, &act, NULL) < 0) {
- fatalSys("sigaction");
- }
-
- /* Set up pipe for signal handler */
- if (pipe(Pipe) < 0) {
- fatalSys("pipe");
- }
-
- /* Main server loop */
- maxFD = sock;
- if (Pipe[0] > maxFD) maxFD = Pipe[0];
- maxFD++;
-
- for(;;) {
- fd_set readable;
- FD_ZERO(&readable);
- FD_SET(sock, &readable);
- FD_SET(Pipe[0], &readable);
-
- while(1) {
- i = select(maxFD, &readable, NULL, NULL, NULL);
- if (i >= 0 || errno != EINTR) break;
- }
- if (i < 0) {
- fatalSys("select");
- }
-
- if (FD_ISSET(Pipe[0], &readable)) {
- /* Clear pipe */
- char buf[SMALLBUF];
- read(Pipe[0], buf, SMALLBUF);
- }
-
- if (ReapPending) {
- ReapPending = 0;
- reapSessions(myAddr, sock);
- }
- if (!FD_ISSET(sock, &readable)) {
- continue;
- }
-
- if (receivePacket(sock, &packet, &len) < 0) {
- continue;
- }
-
- /* Check length */
- if (ntohs(packet.length) + HDR_SIZE > len) {
- syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
- (unsigned int) ntohs(packet.length));
- continue;
- }
-
- /* Sanity check on packet */
- if (packet.ver != 1 || packet.type != 1) {
- /* Syslog an error */
- continue;
- }
- switch(packet.code) {
- case CODE_PADI:
- processPADI(sock, myAddr, &packet, len);
- break;
- case CODE_PADR:
- processPADR(sock, myAddr, &packet, len);
- break;
- case CODE_PADT:
- /* Kill the child */
- processPADT(sock, myAddr, &packet, len);
- break;
- case CODE_SESS:
- /* Ignore SESS -- children will handle them */
- break;
- case CODE_PADO:
- case CODE_PADS:
- /* Ignore PADO and PADS totally */
- break;
- default:
- /* Syslog an error */
- break;
- }
- }
- return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: sendErrorPADS
-*%ARGUMENTS:
-* sock -- socket to write to
-* source -- source Ethernet address
-* dest -- destination Ethernet address
-* errorTag -- error tag
-* errorMsg -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADS packet with an error message
-***********************************************************************/
-void
-sendErrorPADS(int sock,
- unsigned char *source,
- unsigned char *dest,
- int errorTag,
- char *errorMsg)
-{
- PPPoEPacket pads;
- unsigned char *cursor = pads.payload;
- UINT16_t plen;
- PPPoETag err;
- int elen = strlen(errorMsg);
-
- memcpy(pads.ethHdr.h_dest, dest, ETH_ALEN);
- memcpy(pads.ethHdr.h_source, source, ETH_ALEN);
- pads.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
- pads.ver = 1;
- pads.type = 1;
- pads.code = CODE_PADS;
-
- pads.session = htons(0);
- plen = 0;
-
- err.type = htons(errorTag);
- err.length = htons(elen);
-
- memcpy(err.payload, errorMsg, elen);
- memcpy(cursor, &err, TAG_HDR_SIZE+elen);
- cursor += TAG_HDR_SIZE + elen;
- plen += TAG_HDR_SIZE + elen;
-
- if (relayId.type) {
- memcpy(cursor, &relayId, ntohs(relayId.length) + TAG_HDR_SIZE);
- cursor += ntohs(relayId.length) + TAG_HDR_SIZE;
- plen += ntohs(relayId.length) + TAG_HDR_SIZE;
- }
- if (hostUniq.type) {
- memcpy(cursor, &hostUniq, ntohs(hostUniq.length) + TAG_HDR_SIZE);
- cursor += ntohs(hostUniq.length) + TAG_HDR_SIZE;
- plen += ntohs(hostUniq.length) + TAG_HDR_SIZE;
- }
- pads.length = htons(plen);
- sendPacket(NULL, sock, &pads, (int) (plen + HDR_SIZE));
-}
-
-
-/**********************************************************************
-*%FUNCTION: startPPPDUserMode
-*%ARGUMENTS:
-* session -- client session record
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Starts PPPD for user-mode PPPoE
-***********************************************************************/
-void
-startPPPDUserMode(struct ClientSession *session)
-{
- /* Leave some room */
- char *argv[20];
-
- char buffer[SMALLBUF];
-
- argv[0] = "pppd";
- argv[1] = "pty";
-
- snprintf(buffer, SMALLBUF, "%s -n -I %s -e %d:%02x:%02x:%02x:%02x:%02x:%02x%s",
- PPPOE_PATH, IfName,
- ntohs(session->sess),
- session->eth[0], session->eth[1], session->eth[2],
- session->eth[3], session->eth[4], session->eth[5],
- PppoeOptions);
- argv[2] = strdup(buffer);
- if (!argv[2]) {
- /* TODO: Send a PADT */
- exit(EXIT_FAILURE);
- }
-
- argv[3] = "file";
- argv[4] = PPPOE_SERVER_OPTIONS;
-
- snprintf(buffer, SMALLBUF, "%d.%d.%d.%d:%d.%d.%d.%d",
- (int) LocalIP[0], (int) LocalIP[1],
- (int) LocalIP[2], (int) LocalIP[3],
- (int) session->ip[0], (int) session->ip[1],
- (int) session->ip[2], (int) session->ip[3]);
- syslog(LOG_INFO,
- "Session %d created for client %02x:%02x:%02x:%02x:%02x:%02x (%d.%d.%d.%d)",
- ntohs(session->sess),
- session->eth[0], session->eth[1], session->eth[2],
- session->eth[3], session->eth[4], session->eth[5],
- (int) session->ip[0], (int) session->ip[1],
- (int) session->ip[2], (int) session->ip[3]);
- argv[5] = buffer; /* No need for strdup -- about to execv! */
- argv[6] = "nodetach";
- argv[7] = "noaccomp";
- argv[8] = "nobsdcomp";
- argv[9] = "nodeflate";
- argv[10] = "nopcomp";
- argv[11] = "novj";
- argv[12] = "novjccomp";
- argv[13] = "default-asyncmap";
- if (Synchronous) {
- argv[14] = "sync";
- argv[15] = NULL;
- } else {
- argv[14] = NULL;
- }
-
- execv(PPPD_PATH, argv);
- exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: startPPPDLinuxKernelMode
-*%ARGUMENTS:
-* session -- client session record
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Starts PPPD for kernel-mode PPPoE on Linux
-***********************************************************************/
-void
-startPPPDLinuxKernelMode(struct ClientSession *session)
-{
- /* Leave some room */
- char *argv[20];
-
- char buffer[SMALLBUF];
-
- argv[0] = "pppd";
- argv[1] = "plugin";
- argv[2] = PLUGIN_PATH;
- argv[3] = IfName;
- snprintf(buffer, SMALLBUF, "%d:%02x:%02x:%02x:%02x:%02x:%02x",
- ntohs(session->sess),
- session->eth[0], session->eth[1], session->eth[2],
- session->eth[3], session->eth[4], session->eth[5]);
- argv[4] = "rp_pppoe_sess";
- argv[5] = strdup(buffer);
- if (!argv[5]) {
- /* TODO: Send a PADT */
- exit(EXIT_FAILURE);
- }
- argv[6] = "file";
- argv[7] = PPPOE_SERVER_OPTIONS;
-
- snprintf(buffer, SMALLBUF, "%d.%d.%d.%d:%d.%d.%d.%d",
- (int) LocalIP[0], (int) LocalIP[1],
- (int) LocalIP[2], (int) LocalIP[3],
- (int) session->ip[0], (int) session->ip[1],
- (int) session->ip[2], (int) session->ip[3]);
- syslog(LOG_INFO,
- "Session %d created for client %02x:%02x:%02x:%02x:%02x:%02x (%d.%d.%d.%d)",
- ntohs(session->sess),
- session->eth[0], session->eth[1], session->eth[2],
- session->eth[3], session->eth[4], session->eth[5],
- (int) session->ip[0], (int) session->ip[1],
- (int) session->ip[2], (int) session->ip[3]);
- argv[8] = buffer;
- argv[9] = "nodetach";
- argv[10] = "noaccomp";
- argv[11] = "nobsdcomp";
- argv[12] = "nodeflate";
- argv[13] = "nopcomp";
- argv[14] = "novj";
- argv[15] = "novjccomp";
- argv[16] = "default-asyncmap";
- argv[17] = NULL;
- execv(PPPD_PATH, argv);
- exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: startPPPD
-*%ARGUMENTS:
-* session -- client session record
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Starts PPPD
-***********************************************************************/
-void
-startPPPD(struct ClientSession *session)
-{
- if (UseLinuxKernelModePPPoE) startPPPDLinuxKernelMode(session);
- else startPPPDUserMode(session);
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/pppoe-sniff.c b/mdk-stage1/rp-pppoe/src/pppoe-sniff.c
deleted file mode 100644
index aa796547b..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe-sniff.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/***********************************************************************
-*
-* pppoe-sniff.c
-*
-* Sniff a network for likely-looking PPPoE frames and deduce the value
-* to supply to PPPOE_EXTRA in /etc/ppp/pppoe.conf. USE AT YOUR OWN RISK.
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#include <errno.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdlib.h>
-
-#ifdef USE_DLPI
-#include <sys/dlpi.h>
-/* function declarations */
-void dlpromisconreq( int fd, u_long level);
-void dlokack(int fd, char *bufp);
-#endif
-
-/* Default interface if no -I option given */
-#define DEFAULT_IF "eth0"
-
-/* Global vars */
-int SeenPADR = 0;
-int SeenSess = 0;
-UINT16_t SessType, DiscType;
-
-char *IfName = NULL; /* Interface name */
-char *ServiceName = NULL; /* Service name */
-
-/**********************************************************************
-*%FUNCTION: parsePADRTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADR packet
-***********************************************************************/
-void
-parsePADRTags(UINT16_t type, UINT16_t len, unsigned char *data,
- void *extra)
-{
- switch(type) {
- case TAG_SERVICE_NAME:
- ServiceName = malloc(len+1);
- if (ServiceName) {
- memcpy(ServiceName, data, len);
- ServiceName[len] = 0;
- }
- break;
- }
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
- char buf[1024];
- sprintf(buf, "%.256s: %.256s", str, strerror(errno));
- printErr(buf);
- exit(1);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
- printErr(str);
- exit(1);
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- program name
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage information and exits.
-***********************************************************************/
-void
-usage(char const *argv0)
-{
- fprintf(stderr, "Usage: %s [options]\n", argv0);
- fprintf(stderr, "Options:\n");
- fprintf(stderr, " -I if_name -- Specify interface (default %s.)\n",
- DEFAULT_IF);
- fprintf(stderr, " -V -- Print version and exit.\n");
- fprintf(stderr, "\nPPPoE Version %s, Copyright (C) 2000 Roaring Penguin Software Inc.\n", VERSION);
- fprintf(stderr, "PPPoE comes with ABSOLUTELY NO WARRANTY.\n");
- fprintf(stderr, "This is free software, and you are welcome to redistribute it under the terms\n");
- fprintf(stderr, "of the GNU General Public License, version 2 or any later version.\n");
- fprintf(stderr, "http://www.roaringpenguin.com\n");
- exit(0);
-}
-
-#if !defined(USE_LINUX_PACKET) && !defined(USE_DLPI)
-
-int
-main()
-{
- fprintf(stderr, "Sorry, pppoe-sniff works only on Linux.\n");
- return 1;
-}
-
-#else
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- count and values of command-line arguments
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Main program
-***********************************************************************/
-int
-main(int argc, char *argv[])
-{
- int opt;
- int sock;
- PPPoEPacket pkt;
- int size;
-#ifdef USE_DLPI
- long buf[MAXDLBUF];
-#endif
-
- while((opt = getopt(argc, argv, "I:V")) != -1) {
- switch(opt) {
- case 'I':
- SET_STRING(IfName, optarg);
- break;
- case 'V':
- printf("pppoe-sniff: Roaring Penguin PPPoE Version %s\n", VERSION);
- exit(0);
- default:
- usage(argv[0]);
- }
- }
-
- /* Pick a default interface name */
- if (!IfName) {
- IfName = DEFAULT_IF;
- }
-
- /* Open the interface */
-#ifdef USE_DLPI
- sock = openInterface(IfName, Eth_PPPOE_Discovery, NULL);
- dlpromisconreq(sock, DL_PROMISC_PHYS);
- dlokack(sock, (char *)buf);
- dlpromisconreq(sock, DL_PROMISC_SAP);
- dlokack(sock, (char *)buf);
-#else
-
- sock = openInterface(IfName, ETH_P_ALL, NULL);
-
-#endif
-
- /* We assume interface is in promiscuous mode -- use ifconfig to
- ensure this */
- fprintf(stderr, "Sniffing for PADR. Start your connection on another machine...\n");
- while (!SeenPADR) {
- if (receivePacket(sock, &pkt, &size) < 0) continue;
- if (ntohs(pkt.length) + HDR_SIZE > size) continue;
- if (pkt.ver != 1 || pkt.type != 1) continue;
- if (pkt.code != CODE_PADR) continue;
-
- /* Looks promising... parse it */
- if (parsePacket(&pkt, parsePADRTags, NULL) < 0) {
- continue;
- }
- DiscType = ntohs(pkt.ethHdr.h_proto);
- fprintf(stderr, "\nExcellent! Sniffed a likely-looking PADR.\n");
- break;
- }
-
- while (!SeenSess) {
- if (receivePacket(sock, &pkt, &size) < 0) continue;
- if (ntohs(pkt.length) + HDR_SIZE > size) continue;
- if (pkt.ver != 1 || pkt.type != 1) continue;
- if (pkt.code != CODE_SESS) continue;
-
- /* Cool! */
- SessType = ntohs(pkt.ethHdr.h_proto);
- break;
- }
-
- fprintf(stderr, "Wonderful! Sniffed a likely-looking session packet.\n");
- if ((ServiceName == NULL || *ServiceName == 0) &&
- DiscType == ETH_PPPOE_DISCOVERY &&
- SessType == ETH_PPPOE_SESSION) {
- fprintf(stderr, "\nGreat! It looks like a standard PPPoE service.\nYou should not need anything special in the configuration file.\n");
- return 0;
- }
-
- fprintf(stderr, "\nOK, looks like you need something special in the configuration file.\nTry this:\n\n");
- if (ServiceName != NULL && *ServiceName != 0) {
- fprintf(stderr, "SERVICENAME='%s'\n", ServiceName);
- }
- if (DiscType != ETH_PPPOE_DISCOVERY || SessType != ETH_PPPOE_SESSION) {
- fprintf(stderr, " PPPOE_EXTRA='-f %x:%x'\n", DiscType, SessType);
- }
- return 0;
-}
-
-#endif
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
- char buf[1024];
- sprintf(buf, "%.256s: %.256s", str, strerror(errno));
- printErr(buf);
-}
diff --git a/mdk-stage1/rp-pppoe/src/pppoe.c b/mdk-stage1/rp-pppoe/src/pppoe.c
deleted file mode 100644
index 8ffe37248..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe.c
+++ /dev/null
@@ -1,834 +0,0 @@
-/***********************************************************************
-*
-* pppoe.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Copyright (C) 2000-2001 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef USE_LINUX_PACKET
-#include <sys/ioctl.h>
-#include <fcntl.h>
-#endif
-
-#include <signal.h>
-
-#ifdef HAVE_N_HDLC
-#ifndef N_HDLC
-#include <linux/termios.h>
-#endif
-#endif
-
-/* Default interface if no -I option given */
-#define DEFAULT_IF "eth0"
-
-/* Global variables -- options */
-int optInactivityTimeout = 0; /* Inactivity timeout */
-int optClampMSS = 0; /* Clamp MSS to this value */
-int optSkipSession = 0; /* Perform discovery, print session info
- and exit */
-
-PPPoEConnection *Connection = NULL; /* Must be global -- used
- in signal handler */
-/***********************************************************************
-*%FUNCTION: sendSessionPacket
-*%ARGUMENTS:
-* conn -- PPPoE connection
-* packet -- the packet to send
-* len -- length of data to send
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Transmits a session packet to the peer.
-***********************************************************************/
-void
-sendSessionPacket(PPPoEConnection *conn, PPPoEPacket *packet, int len)
-{
- packet->length = htons(len);
- if (optClampMSS) {
- clampMSS(packet, "outgoing", optClampMSS);
- }
- if (sendPacket(conn, conn->sessionSocket, packet, len + HDR_SIZE) < 0) {
- exit(EXIT_FAILURE);
- }
- if (conn->debugFile) {
- dumpPacket(conn->debugFile, packet, "SENT");
- fprintf(conn->debugFile, "\n");
- fflush(conn->debugFile);
- }
-}
-
-#ifdef USE_BPF
-/**********************************************************************
-*%FUNCTION: sessionDiscoveryPacket
-*%ARGUMENTS:
-* packet -- the discovery packet that was received
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* We got a discovery packet during the session stage. This most likely
-* means a PADT.
-*
-* The BSD version uses a single socket for both discovery and session
-* packets. When a packet comes in over the wire once we are in
-* session mode, either syncReadFromEth() or asyncReadFromEth() will
-* have already read the packet and determined it to be a discovery
-* packet before passing it here.
-***********************************************************************/
-void
-sessionDiscoveryPacket(PPPoEPacket *packet)
-{
- /* Sanity check */
- if (packet->code != CODE_PADT) {
- return;
- }
-
- /* It's a PADT, all right. Is it for us? */
- if (packet->session != Connection->session) {
- /* Nope, ignore it */
- return;
- }
-
- syslog(LOG_INFO,
- "Session terminated -- received PADT from access concentrator");
- parsePacket(packet, parseLogErrs, NULL);
- exit(EXIT_SUCCESS);
-}
-#else
-/**********************************************************************
-*%FUNCTION: sessionDiscoveryPacket
-*%ARGUMENTS:
-* conn -- PPPoE connection
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* We got a discovery packet during the session stage. This most likely
-* means a PADT.
-***********************************************************************/
-void
-sessionDiscoveryPacket(PPPoEConnection *conn)
-{
- PPPoEPacket packet;
- int len;
-
- if (receivePacket(conn->discoverySocket, &packet, &len) < 0) {
- return;
- }
-
- /* Check length */
- if (ntohs(packet.length) + HDR_SIZE > len) {
- syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
- (unsigned int) ntohs(packet.length));
- return;
- }
-
- if (conn->debugFile) {
- dumpPacket(conn->debugFile, &packet, "RCVD");
- fprintf(conn->debugFile, "\n");
- fflush(conn->debugFile);
- }
-
- if (packet.code != CODE_PADT) {
- /* Not PADT; ignore it */
- return;
- }
-
- /* It's a PADT, all right. Is it for us? */
- if (packet.session != conn->session) {
- /* Nope, ignore it */
- return;
- }
-
- syslog(LOG_INFO,
- "Session terminated -- received PADT from peer");
- parsePacket(&packet, parseLogErrs, NULL);
- exit(EXIT_SUCCESS);
-}
-#endif /* USE_BPF */
-
-/**********************************************************************
-*%FUNCTION: session
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Handles the "session" phase of PPPoE
-***********************************************************************/
-void
-session(PPPoEConnection *conn)
-{
- fd_set readable;
- PPPoEPacket packet;
- struct timeval tv;
- struct timeval *tvp = NULL;
- int maxFD = 0;
- int r;
-
- /* Open a session socket */
- conn->sessionSocket = openInterface(conn->ifName, Eth_PPPOE_Session, conn->myEth);
-
- /* Prepare for select() */
- if (conn->sessionSocket > maxFD) maxFD = conn->sessionSocket;
- if (conn->discoverySocket > maxFD) maxFD = conn->discoverySocket;
- maxFD++;
-
- /* Fill in the constant fields of the packet to save time */
- memcpy(packet.ethHdr.h_dest, conn->peerEth, ETH_ALEN);
- memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
- packet.ethHdr.h_proto = htons(Eth_PPPOE_Session);
- packet.ver = 1;
- packet.type = 1;
- packet.code = CODE_SESS;
- packet.session = conn->session;
-
- initPPP();
-
-#ifdef USE_BPF
- /* check for buffered session data */
- while (BPF_BUFFER_HAS_DATA) {
- if (conn->synchronous) {
- syncReadFromEth(conn, conn->sessionSocket, optClampMSS);
- } else {
- asyncReadFromEth(conn, conn->sessionSocket, optClampMSS);
- }
- }
-#endif
-
- for (;;) {
- if (optInactivityTimeout > 0) {
- tv.tv_sec = optInactivityTimeout;
- tv.tv_usec = 0;
- tvp = &tv;
- }
- FD_ZERO(&readable);
- FD_SET(0, &readable); /* ppp packets come from stdin */
- if (conn->discoverySocket >= 0) {
- FD_SET(conn->discoverySocket, &readable);
- }
- FD_SET(conn->sessionSocket, &readable);
- while(1) {
- r = select(maxFD, &readable, NULL, NULL, tvp);
- if (r >= 0 || errno != EINTR) break;
- }
- if (r < 0) {
- fatalSys("select (session)");
- }
- if (r == 0) { /* Inactivity timeout */
- syslog(LOG_ERR, "Inactivity timeout... something wicked happened");
- sendPADT(conn, "RP-PPPoE: Inactivity timeout");
- exit(EXIT_FAILURE);
- }
-
- /* Handle ready sockets */
- if (FD_ISSET(0, &readable)) {
- if (conn->synchronous) {
- syncReadFromPPP(conn, &packet);
- } else {
- asyncReadFromPPP(conn, &packet);
- }
- }
-
- if (FD_ISSET(conn->sessionSocket, &readable)) {
- do {
- if (conn->synchronous) {
- syncReadFromEth(conn, conn->sessionSocket, optClampMSS);
- } else {
- asyncReadFromEth(conn, conn->sessionSocket, optClampMSS);
- }
- } while (BPF_BUFFER_HAS_DATA);
- }
-
-#ifndef USE_BPF
- /* BSD uses a single socket, see *syncReadFromEth() */
- /* for calls to sessionDiscoveryPacket() */
- if (conn->discoverySocket >= 0) {
- if (FD_ISSET(conn->discoverySocket, &readable)) {
- sessionDiscoveryPacket(conn);
- }
- }
-#endif
-
- }
-}
-
-
-/***********************************************************************
-*%FUNCTION: sigPADT
-*%ARGUMENTS:
-* src -- signal received
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* If an established session exists send PADT to terminate from session
-* from our end
-***********************************************************************/
-void
-sigPADT(int src)
-{
- syslog(LOG_DEBUG,"Received signal %d.",(int)src);
- sendPADT(Connection, "RP-PPPoE: Received signal");
- exit(EXIT_SUCCESS);
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- program name
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage information and exits.
-***********************************************************************/
-void
-usage(char const *argv0)
-{
- fprintf(stderr, "Usage: %s [options]\n", argv0);
- fprintf(stderr, "Options:\n");
-#ifdef USE_BPF
- fprintf(stderr, " -I if_name -- Specify interface (REQUIRED)\n");
-#else
- fprintf(stderr, " -I if_name -- Specify interface (default %s.)\n",
- DEFAULT_IF);
-#endif
- fprintf(stderr, " -T timeout -- Specify inactivity timeout in seconds.\n");
- fprintf(stderr, " -D filename -- Log debugging information in filename.\n");
- fprintf(stderr, " -V -- Print version and exit.\n");
- fprintf(stderr, " -A -- Print access concentrator names and exit.\n");
- fprintf(stderr, " -S name -- Set desired service name.\n");
- fprintf(stderr, " -C name -- Set desired access concentrator name.\n");
- fprintf(stderr, " -U -- Use Host-Unique to allow multiple PPPoE sessions.\n");
- fprintf(stderr, " -s -- Use synchronous PPP encapsulation.\n");
- fprintf(stderr, " -m MSS -- Clamp incoming and outgoing MSS options.\n");
- fprintf(stderr, " -p pidfile -- Write process-ID to pidfile.\n");
- fprintf(stderr, " -e sess:mac -- Skip discovery phase; use existing session.\n");
- fprintf(stderr, " -n -- Do not open discovery socket.\n");
- fprintf(stderr, " -k -- Kill a session with PADT (requires -e)\n");
- fprintf(stderr, " -d -- Perform discovery, print session info and exit.\n");
- fprintf(stderr, " -f disc:sess -- Set Ethernet frame types (hex).\n");
- fprintf(stderr, " -h -- Print usage information.\n\n");
- fprintf(stderr, "PPPoE Version %s, Copyright (C) 2001 Roaring Penguin Software Inc.\n", VERSION);
- fprintf(stderr, "PPPoE comes with ABSOLUTELY NO WARRANTY.\n");
- fprintf(stderr, "This is free software, and you are welcome to redistribute it under the terms\n");
- fprintf(stderr, "of the GNU General Public License, version 2 or any later version.\n");
- fprintf(stderr, "http://www.roaringpenguin.com\n");
- exit(EXIT_SUCCESS);
-}
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- count and values of command-line arguments
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Main program
-***********************************************************************/
-int
-main(int argc, char *argv[])
-{
- int opt;
- int n;
- unsigned int m[6]; /* MAC address in -e option */
- unsigned int s; /* Temporary to hold session */
- FILE *pidfile;
- unsigned int discoveryType, sessionType;
-
- PPPoEConnection conn;
-
-#ifdef HAVE_N_HDLC
- int disc = N_HDLC;
- long flags;
-#endif
-
- /* Initialize connection info */
- memset(&conn, 0, sizeof(conn));
- conn.discoverySocket = -1;
- conn.sessionSocket = -1;
-
- /* For signal handler */
- Connection = &conn;
-
- /* Initialize syslog */
- openlog("pppoe", LOG_PID, LOG_DAEMON);
-
- while((opt = getopt(argc, argv, "I:VAT:D:hS:C:Usm:np:e:kdf:")) != -1) {
- switch(opt) {
- case 'f':
- if (sscanf(optarg, "%x:%x", &discoveryType, &sessionType) != 2) {
- fprintf(stderr, "Illegal argument to -f: Should be disc:sess in hex\n");
- exit(EXIT_FAILURE);
- }
- Eth_PPPOE_Discovery = (UINT16_t) discoveryType;
- Eth_PPPOE_Session = (UINT16_t) sessionType;
- break;
- case 'd':
- optSkipSession = 1;
- break;
-
- case 'k':
- conn.killSession = 1;
- break;
-
- case 'n':
- /* Do not even open a discovery socket -- used when invoked
- by pppoe-server */
- conn.noDiscoverySocket = 1;
- break;
-
- case 'e':
- /* Existing session: "sess:xx:yy:zz:aa:bb:cc" where "sess" is
- session-ID, and xx:yy:zz:aa:bb:cc is MAC-address of peer */
- n = sscanf(optarg, "%u:%2x:%2x:%2x:%2x:%2x:%2x",
- &s, &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]);
- if (n != 7) {
- fprintf(stderr, "Illegal argument to -e: Should be sess:xx:yy:zz:aa:bb:cc\n");
- exit(EXIT_FAILURE);
- }
-
- /* Copy MAC address of peer */
- for (n=0; n<6; n++) {
- conn.peerEth[n] = (unsigned char) m[n];
- }
-
- /* Convert session */
- conn.session = htons(s);
-
- /* Skip discovery phase! */
- conn.skipDiscovery = 1;
- break;
-
- case 'p':
- pidfile = fopen(optarg, "w");
- if (pidfile) {
- fprintf(pidfile, "%lu\n", (unsigned long) getpid());
- fclose(pidfile);
- }
- break;
- case 'S':
- SET_STRING(conn.serviceName, optarg);
- break;
- case 'C':
- SET_STRING(conn.acName, optarg);
- break;
- case 's':
- conn.synchronous = 1;
- break;
- case 'U':
- conn.useHostUniq = 1;
- break;
- case 'D':
- conn.debugFile = fopen(optarg, "w");
- if (!conn.debugFile) {
- fprintf(stderr, "Could not open %s: %s\n",
- optarg, strerror(errno));
- exit(EXIT_FAILURE);
- }
- fprintf(conn.debugFile, "rp-pppoe-%s\n", VERSION);
- fflush(conn.debugFile);
- break;
- case 'T':
- optInactivityTimeout = (int) strtol(optarg, NULL, 10);
- if (optInactivityTimeout < 0) {
- optInactivityTimeout = 0;
- }
- break;
- case 'm':
- optClampMSS = (int) strtol(optarg, NULL, 10);
- if (optClampMSS < 536) {
- fprintf(stderr, "-m: %d is too low (min 536)\n", optClampMSS);
- exit(EXIT_FAILURE);
- }
- if (optClampMSS > 1452) {
- fprintf(stderr, "-m: %d is too high (max 1452)\n", optClampMSS);
- exit(EXIT_FAILURE);
- }
- break;
- case 'I':
- SET_STRING(conn.ifName, optarg);
- break;
- case 'V':
- printf("Roaring Penguin PPPoE Version %s\n", VERSION);
- exit(EXIT_SUCCESS);
- case 'A':
- conn.printACNames = 1;
- break;
- case 'h':
- usage(argv[0]);
- break;
- default:
- usage(argv[0]);
- }
- }
-
- /* Pick a default interface name */
- if (!conn.ifName) {
-#ifdef USE_BPF
- fprintf(stderr, "No interface specified (-I option)\n");
- exit(EXIT_FAILURE);
-#else
- SET_STRING(conn.ifName, DEFAULT_IF);
-#endif
- }
-
- /* Set signal handlers: send PADT on TERM, HUP and INT */
- if (!conn.printACNames) {
- signal(SIGTERM, sigPADT);
- signal(SIGHUP, sigPADT);
- signal(SIGINT, sigPADT);
-
-#ifdef HAVE_N_HDLC
- if (conn.synchronous) {
- if (ioctl(0, TIOCSETD, &disc) < 0) {
- printErr("Unable to set line discipline to N_HDLC -- synchronous mode probably will fail");
- } else {
- syslog(LOG_INFO,
- "Changed pty line discipline to N_HDLC for synchronous mode");
- }
- /* There is a bug in Linux's select which returns a descriptor
- * as readable if N_HDLC line discipline is on, even if
- * it isn't really readable. This return happens only when
- * select() times out. To avoid blocking forever in read(),
- * make descriptor 0 non-blocking */
- flags = fcntl(0, F_GETFL);
- if (flags < 0) fatalSys("fcntl(F_GETFL)");
- if (fcntl(0, F_SETFL, (long) flags | O_NONBLOCK) < 0) {
- fatalSys("fcntl(F_SETFL)");
- }
- }
-#endif
-
- }
-
- discovery(&conn);
- if (optSkipSession) {
- printf("%u:%02x:%02x:%02x:%02x:%02x:%02x\n",
- ntohs(conn.session),
- conn.peerEth[0],
- conn.peerEth[1],
- conn.peerEth[2],
- conn.peerEth[3],
- conn.peerEth[4],
- conn.peerEth[5]);
- exit(EXIT_SUCCESS);
- }
- session(&conn);
- return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
- char buf[1024];
- sprintf(buf, "%.256s: %.256s", str, strerror(errno));
- printErr(buf);
- sendPADT(Connection, "RP-PPPoE: System call error");
- exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
- char buf[1024];
- sprintf(buf, "%.256s: %.256s", str, strerror(errno));
- printErr(buf);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
- char buf[1024];
- printErr(str);
- sprintf(buf, "RP-PPPoE: %.256s", str);
- sendPADT(Connection, buf);
- exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: asyncReadFromEth
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* sock -- Ethernet socket
-* clampMss -- if non-zero, do MSS-clamping
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads a packet from the Ethernet interface and sends it to async PPP
-* device.
-***********************************************************************/
-void
-asyncReadFromEth(PPPoEConnection *conn, int sock, int clampMss)
-{
- PPPoEPacket packet;
- int len;
- int plen;
- int i;
- unsigned char pppBuf[4096];
- unsigned char *ptr = pppBuf;
- unsigned char c;
- UINT16_t fcs;
- unsigned char header[2] = {FRAME_ADDR, FRAME_CTRL};
- unsigned char tail[2];
-#ifdef USE_BPF
- int type;
-#endif
-
- if (receivePacket(sock, &packet, &len) < 0) {
- return;
- }
-
- /* Check length */
- if (ntohs(packet.length) + HDR_SIZE > len) {
- syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
- (unsigned int) ntohs(packet.length));
- return;
- }
- if (conn->debugFile) {
- dumpPacket(conn->debugFile, &packet, "RCVD");
- fprintf(conn->debugFile, "\n");
- fflush(conn->debugFile);
- }
-
-#ifdef USE_BPF
- /* Make sure this is a session packet before processing further */
- type = etherType(&packet);
- if (type == Eth_PPPOE_Discovery) {
- sessionDiscoveryPacket(&packet);
- } else if (type != Eth_PPPOE_Session) {
- return;
- }
-#endif
-
- /* Sanity check */
- if (packet.code != CODE_SESS) {
- syslog(LOG_ERR, "Unexpected packet code %d", (int) packet.code);
- return;
- }
- if (packet.ver != 1) {
- syslog(LOG_ERR, "Unexpected packet version %d", (int) packet.ver);
- return;
- }
- if (packet.type != 1) {
- syslog(LOG_ERR, "Unexpected packet type %d", (int) packet.type);
- return;
- }
- if (memcmp(packet.ethHdr.h_source, conn->peerEth, ETH_ALEN)) {
- /* Not for us -- must be another session. This is not an error,
- so don't log anything. */
- return;
- }
-
- if (packet.session != conn->session) {
- /* Not for us -- must be another session. This is not an error,
- so don't log anything. */
- return;
- }
- plen = ntohs(packet.length);
- if (plen + HDR_SIZE > len) {
- syslog(LOG_ERR, "Bogus length field in session packet %d (%d)",
- (int) plen, (int) len);
- return;
- }
-
- /* Clamp MSS */
- if (clampMss) {
- clampMSS(&packet, "incoming", clampMss);
- }
-
- /* Compute FCS */
- fcs = pppFCS16(PPPINITFCS16, header, 2);
- fcs = pppFCS16(fcs, packet.payload, plen) ^ 0xffff;
- tail[0] = fcs & 0x00ff;
- tail[1] = (fcs >> 8) & 0x00ff;
-
- /* Build a buffer to send to PPP */
- *ptr++ = FRAME_FLAG;
- *ptr++ = FRAME_ADDR;
- *ptr++ = FRAME_ESC;
- *ptr++ = FRAME_CTRL ^ FRAME_ENC;
-
- for (i=0; i<plen; i++) {
- c = packet.payload[i];
- if (c == FRAME_FLAG || c == FRAME_ADDR || c == FRAME_ESC || c < 0x20) {
- *ptr++ = FRAME_ESC;
- *ptr++ = c ^ FRAME_ENC;
- } else {
- *ptr++ = c;
- }
- }
- for (i=0; i<2; i++) {
- c = tail[i];
- if (c == FRAME_FLAG || c == FRAME_ADDR || c == FRAME_ESC || c < 0x20) {
- *ptr++ = FRAME_ESC;
- *ptr++ = c ^ FRAME_ENC;
- } else {
- *ptr++ = c;
- }
- }
- *ptr++ = FRAME_FLAG;
-
- /* Ship it out */
- if (write(1, pppBuf, (ptr-pppBuf)) < 0) {
- fatalSys("asyncReadFromEth: write");
- }
-}
-
-/**********************************************************************
-*%FUNCTION: syncReadFromEth
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* sock -- Ethernet socket
-* clampMss -- if true, clamp MSS.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads a packet from the Ethernet interface and sends it to sync PPP
-* device.
-***********************************************************************/
-void
-syncReadFromEth(PPPoEConnection *conn, int sock, int clampMss)
-{
- PPPoEPacket packet;
- int len;
- int plen;
- struct iovec vec[2];
- unsigned char dummy[2];
-#ifdef USE_BPF
- int type;
-#endif
-
- if (receivePacket(sock, &packet, &len) < 0) {
- return;
- }
-
- /* Check length */
- if (ntohs(packet.length) + HDR_SIZE > len) {
- syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
- (unsigned int) ntohs(packet.length));
- return;
- }
- if (conn->debugFile) {
- dumpPacket(conn->debugFile, &packet, "RCVD");
- fprintf(conn->debugFile, "\n");
- fflush(conn->debugFile);
- }
-
-#ifdef USE_BPF
- /* Make sure this is a session packet before processing further */
- type = etherType(&packet);
- if (type == Eth_PPPOE_Discovery) {
- sessionDiscoveryPacket(&packet);
- } else if (type != Eth_PPPOE_Session) {
- return;
- }
-#endif
-
- /* Sanity check */
- if (packet.code != CODE_SESS) {
- syslog(LOG_ERR, "Unexpected packet code %d", (int) packet.code);
- return;
- }
- if (packet.ver != 1) {
- syslog(LOG_ERR, "Unexpected packet version %d", (int) packet.ver);
- return;
- }
- if (packet.type != 1) {
- syslog(LOG_ERR, "Unexpected packet type %d", (int) packet.type);
- return;
- }
- if (memcmp(packet.ethHdr.h_source, conn->peerEth, ETH_ALEN)) {
- /* Not for us -- must be another session. This is not an error,
- so don't log anything. */
- return;
- }
- if (packet.session != conn->session) {
- /* Not for us -- must be another session. This is not an error,
- so don't log anything. */
- return;
- }
- plen = ntohs(packet.length);
- if (plen + HDR_SIZE > len) {
- syslog(LOG_ERR, "Bogus length field in session packet %d (%d)",
- (int) plen, (int) len);
- return;
- }
-
- /* Clamp MSS */
- if (clampMss) {
- clampMSS(&packet, "incoming", clampMss);
- }
-
- /* Ship it out */
- vec[0].iov_base = (void *) dummy;
- dummy[0] = FRAME_ADDR;
- dummy[1] = FRAME_CTRL;
- vec[0].iov_len = 2;
- vec[1].iov_base = (void *) packet.payload;
- vec[1].iov_len = plen;
-
- if (writev(1, vec, 2) < 0) {
- fatalSys("syncReadFromEth: write");
- }
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/pppoe.h b/mdk-stage1/rp-pppoe/src/pppoe.h
deleted file mode 100644
index da300c17d..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/***********************************************************************
-*
-* pppoe.h
-*
-* Declaration of various PPPoE constants
-*
-* Copyright (C) 2000 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-
-#ifdef __sun__
-#define __EXTENSIONS__
-#endif
-
-#include "config.h"
-
-#if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
-#define _POSIX_SOURCE 1 /* For sigaction defines */
-#endif
-
-#include <stdio.h> /* For FILE */
-#include <sys/types.h> /* For pid_t */
-
-/* How do we access raw Ethernet devices? */
-#undef USE_LINUX_PACKET
-#undef USE_BPF
-
-#if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
-#define USE_LINUX_PACKET 1
-#elif defined(HAVE_NET_BPF_H)
-#define USE_BPF 1
-#elif defined(HAVE_SYS_DLPI_H)
-#define USE_DLPI
-#endif
-
-/* Sanity check */
-#if !defined(USE_BPF) && !defined(USE_LINUX_PACKET) && !defined(USE_DLPI)
-#error Unknown method for accessing raw Ethernet frames
-#endif
-
-#ifdef HAVE_SYS_CDEFS_H
-#include <sys/cdefs.h>
-#endif
-
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-
-/* Ugly header files on some Linux boxes... */
-#if defined(HAVE_LINUX_IF_H)
-#include <linux/if.h>
-#elif defined(HAVE_NET_IF_H)
-#include <net/if.h>
-#endif
-
-#ifdef HAVE_NET_IF_TYPES_H
-#include <net/if_types.h>
-#endif
-
-#ifdef HAVE_NET_IF_DL_H
-#include <net/if_dl.h>
-#endif
-
-/* I'm not sure why this is needed... I do not have OpenBSD */
-#if defined(__OpenBSD__)
-#include <net/ppp_defs.h>
-#include <net/if_ppp.h>
-#endif
-
-#ifdef USE_BPF
-extern int bpfSize;
-struct PPPoEPacketStruct;
-void sessionDiscoveryPacket(struct PPPoEPacketStruct *packet);
-#define BPF_BUFFER_IS_EMPTY (bpfSize <= 0)
-#define BPF_BUFFER_HAS_DATA (bpfSize > 0)
-#define ethhdr ether_header
-#define h_dest ether_dhost
-#define h_source ether_shost
-#define h_proto ether_type
-#define ETH_DATA_LEN ETHERMTU
-#define ETH_ALEN ETHER_ADDR_LEN
-#else
-#undef USE_BPF
-#define BPF_BUFFER_IS_EMPTY 1
-#define BPF_BUFFER_HAS_DATA 0
-#endif
-
-#ifdef USE_DLPI
-#include <sys/ethernet.h>
-#define ethhdr ether_header
-#define ETH_DATA_LEN ETHERMTU
-#define ETH_ALEN ETHERADDRL
-#define h_dest ether_dhost.ether_addr_octet
-#define h_source ether_shost.ether_addr_octet
-#define h_proto ether_type
-
-/* cloned from dltest.h */
-#define MAXDLBUF 8192
-#define MAXDLADDR 1024
-#define MAXWAIT 15
-#define OFFADDR(s, n) (u_char*)((char*)(s) + (int)(n))
-#define CASERET(s) case s: return ("s")
-
-#endif
-
-/* Define various integer types -- assumes a char is 8 bits */
-#if SIZEOF_UNSIGNED_SHORT == 2
-typedef unsigned short UINT16_t;
-#elif SIZEOF_UNSIGNED_INT == 2
-typedef unsigned int UINT16_t;
-#else
-#error Could not find a 16-bit integer type
-#endif
-
-#if SIZEOF_UNSIGNED_SHORT == 4
-typedef unsigned short UINT32_t;
-#elif SIZEOF_UNSIGNED_INT == 4
-typedef unsigned int UINT32_t;
-#elif SIZEOF_UNSIGNED_LONG == 4
-typedef unsigned long UINT32_t;
-#else
-#error Could not find a 16-bit integer type
-#endif
-
-#ifdef HAVE_LINUX_IF_ETHER_H
-#include <linux/if_ether.h>
-#endif
-
-#include <netinet/in.h>
-
-#ifdef HAVE_NETINET_IF_ETHER_H
-#include <sys/types.h>
-
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#ifndef HAVE_SYS_DLPI_H
-#include <netinet/if_ether.h>
-#endif
-#endif
-
-
-
-/* Ethernet frame types according to RFC 2516 */
-#define ETH_PPPOE_DISCOVERY 0x8863
-#define ETH_PPPOE_SESSION 0x8864
-
-/* But some brain-dead peers disobey the RFC, so frame types are variables */
-extern UINT16_t Eth_PPPOE_Discovery;
-extern UINT16_t Eth_PPPOE_Session;
-
-/* PPPoE codes */
-#define CODE_PADI 0x09
-#define CODE_PADO 0x07
-#define CODE_PADR 0x19
-#define CODE_PADS 0x65
-#define CODE_PADT 0xA7
-#define CODE_SESS 0x00
-
-/* PPPoE Tags */
-#define TAG_END_OF_LIST 0x0000
-#define TAG_SERVICE_NAME 0x0101
-#define TAG_AC_NAME 0x0102
-#define TAG_HOST_UNIQ 0x0103
-#define TAG_AC_COOKIE 0x0104
-#define TAG_VENDOR_SPECIFIC 0x0105
-#define TAG_RELAY_SESSION_ID 0x0110
-#define TAG_SERVICE_NAME_ERROR 0x0201
-#define TAG_AC_SYSTEM_ERROR 0x0202
-#define TAG_GENERIC_ERROR 0x0203
-
-/* Discovery phase states */
-#define STATE_SENT_PADI 0
-#define STATE_RECEIVED_PADO 1
-#define STATE_SENT_PADR 2
-#define STATE_SESSION 3
-#define STATE_TERMINATED 4
-
-/* How many PADI/PADS attempts? */
-#define MAX_PADI_ATTEMPTS 3
-
-/* Initial timeout for PADO/PADS */
-#define PADI_TIMEOUT 5
-
-/* States for scanning PPP frames */
-#define STATE_WAITFOR_FRAME_ADDR 0
-#define STATE_DROP_PROTO 1
-#define STATE_BUILDING_PACKET 2
-
-/* Special PPP frame characters */
-#define FRAME_ESC 0x7D
-#define FRAME_FLAG 0x7E
-#define FRAME_ADDR 0xFF
-#define FRAME_CTRL 0x03
-#define FRAME_ENC 0x20
-
-#define IPV4ALEN 4
-#define SMALLBUF 256
-
-/* A PPPoE Packet, including Ethernet headers */
-typedef struct PPPoEPacketStruct {
- struct ethhdr ethHdr; /* Ethernet header */
-#ifdef PACK_BITFIELDS_REVERSED
- unsigned int type:4; /* PPPoE Type (must be 1) */
- unsigned int ver:4; /* PPPoE Version (must be 1) */
-#else
- unsigned int ver:4; /* PPPoE Version (must be 1) */
- unsigned int type:4; /* PPPoE Type (must be 1) */
-#endif
- unsigned int code:8; /* PPPoE code */
- unsigned int session:16; /* PPPoE session */
- unsigned int length:16; /* Payload length */
- unsigned char payload[ETH_DATA_LEN]; /* A bit of room to spare */
-} PPPoEPacket;
-
-/* Header size of a PPPoE packet */
-#define PPPOE_OVERHEAD 6 /* type, code, session, length */
-#define HDR_SIZE (sizeof(struct ethhdr) + PPPOE_OVERHEAD)
-#define MAX_PPPOE_PAYLOAD (ETH_DATA_LEN - PPPOE_OVERHEAD)
-#define MAX_PPPOE_MTU (MAX_PPPOE_PAYLOAD - 2)
-
-/* PPPoE Tag */
-
-typedef struct PPPoETagStruct {
- unsigned int type:16; /* tag type */
- unsigned int length:16; /* Length of payload */
- unsigned char payload[ETH_DATA_LEN]; /* A LOT of room to spare */
-} PPPoETag;
-/* Header size of a PPPoE tag */
-#define TAG_HDR_SIZE 4
-
-/* Chunk to read from stdin */
-#define READ_CHUNK 4096
-
-/* Function passed to parsePacket */
-typedef void ParseFunc(UINT16_t type,
- UINT16_t len,
- unsigned char *data,
- void *extra);
-
-/* Structures used by PPPoE server */
-struct ClientSession {
- pid_t pid; /* PID of child handling session */
- unsigned char ip[IPV4ALEN]; /* IP address of peer */
- UINT16_t sess; /* Session number */
- unsigned char eth[ETH_ALEN]; /* Peer's Ethernet address */
- int recvdPADT; /* Peer sent a PADT */
-};
-
-#define PPPINITFCS16 0xffff /* Initial FCS value */
-
-/* Keep track of the state of a connection -- collect everything in
- one spot */
-
-typedef struct PPPoEConnectionStruct {
- int discoveryState; /* Where we are in discovery */
- int discoverySocket; /* Raw socket for discovery frames */
- int sessionSocket; /* Raw socket for session frames */
- unsigned char myEth[ETH_ALEN]; /* My MAC address */
- unsigned char peerEth[ETH_ALEN]; /* Peer's MAC address */
- UINT16_t session; /* Session ID */
- char *ifName; /* Interface name */
- char *serviceName; /* Desired service name, if any */
- char *acName; /* Desired AC name, if any */
- int synchronous; /* Use synchronous PPP */
- int useHostUniq; /* Use Host-Uniq tag */
- int printACNames; /* Just print AC names */
- int skipDiscovery; /* Skip discovery */
- int noDiscoverySocket; /* Don't even open discovery socket */
- int killSession; /* Kill session and exit */
- FILE *debugFile; /* Debug file for dumping packets */
- int numPADOs; /* Number of PADO packets received */
- PPPoETag cookie; /* We have to send this if we get it */
- PPPoETag relayId; /* Ditto */
-} PPPoEConnection;
-
-/* Structure used to determine acceptable PADO or PADS packet */
-struct PacketCriteria {
- PPPoEConnection *conn;
- int acNameOK;
- int serviceNameOK;
-};
-
-/* Function Prototypes */
-UINT16_t etherType(PPPoEPacket *packet);
-int openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr);
-int sendPacket(PPPoEConnection *conn, int sock, PPPoEPacket *pkt, int size);
-int receivePacket(int sock, PPPoEPacket *pkt, int *size);
-void fatalSys(char const *str);
-void rp_fatal(char const *str);
-void printErr(char const *str);
-void sysErr(char const *str);
-void dumpPacket(FILE *fp, PPPoEPacket *packet, char const *dir);
-void dumpHex(FILE *fp, unsigned char const *buf, int len);
-int parsePacket(PPPoEPacket *packet, ParseFunc *func, void *extra);
-void parseLogErrs(UINT16_t typ, UINT16_t len, unsigned char *data, void *xtra);
-void syncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet);
-void asyncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet);
-void asyncReadFromEth(PPPoEConnection *conn, int sock, int clampMss);
-void syncReadFromEth(PPPoEConnection *conn, int sock, int clampMss);
-char *strDup(char const *str);
-void sendPADT(PPPoEConnection *conn, char const *msg);
-void sendSessionPacket(PPPoEConnection *conn,
- PPPoEPacket *packet, int len);
-void initPPP(void);
-void clampMSS(PPPoEPacket *packet, char const *dir, int clampMss);
-UINT16_t computeTCPChecksum(unsigned char *ipHdr, unsigned char *tcpHdr);
-UINT16_t pppFCS16(UINT16_t fcs, unsigned char *cp, int len);
-void discovery(PPPoEConnection *conn);
-unsigned char *findTag(PPPoEPacket *packet, UINT16_t tagType,
- PPPoETag *tag);
-
-#define SET_STRING(var, val) do { if (var) free(var); var = strDup(val); } while(0);
-
-#define CHECK_ROOM(cursor, start, len) \
-do {\
- if (((cursor)-(start))+(len) > MAX_PPPOE_PAYLOAD) { \
- syslog(LOG_ERR, "Would create too-long packet"); \
- return; \
- } \
-} while(0)
-
-/* True if Ethernet address is broadcast or multicast */
-#define NOT_UNICAST(e) ((e[0] & 0x01) != 0)
-#define BROADCAST(e) ((e[0] & e[1] & e[2] & e[3] & e[4] & e[5]) == 0xFF)
-#define NOT_BROADCAST(e) ((e[0] & e[1] & e[2] & e[3] & e[4] & e[5]) != 0xFF)
diff --git a/mdk-stage1/rp-pppoe/src/relay.c b/mdk-stage1/rp-pppoe/src/relay.c
deleted file mode 100644
index 9738cb8a8..000000000
--- a/mdk-stage1/rp-pppoe/src/relay.c
+++ /dev/null
@@ -1,1541 +0,0 @@
-/***********************************************************************
-*
-* relay.c
-*
-* Implementation of PPPoE relay
-*
-* Copyright (C) 2001 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-static char const RCSID[] =
-"$Id$";
-
-#define _GNU_SOURCE 1 /* For SA_RESTART */
-
-#include "relay.h"
-
-#include <signal.h>
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-
-/* Interfaces (max MAX_INTERFACES) */
-PPPoEInterface Interfaces[MAX_INTERFACES];
-int NumInterfaces;
-
-/* Relay info */
-int NumSessions;
-int MaxSessions;
-PPPoESession *AllSessions;
-PPPoESession *FreeSessions;
-PPPoESession *ActiveSessions;
-
-SessionHash *AllHashes;
-SessionHash *FreeHashes;
-SessionHash *Buckets[HASHTAB_SIZE];
-
-volatile unsigned int Epoch = 0;
-volatile unsigned int CleanCounter = 0;
-
-/* How often to clean up stale sessions? */
-#define MIN_CLEAN_PERIOD 30 /* Minimum period to run cleaner */
-#define TIMEOUT_DIVISOR 20 /* How often to run cleaner per timeout period */
-unsigned int CleanPeriod = MIN_CLEAN_PERIOD;
-
-/* How long a session can be idle before it is cleaned up? */
-unsigned int IdleTimeout = MIN_CLEAN_PERIOD * TIMEOUT_DIVISOR;
-
-/* Pipe for breaking select() to initiate periodic cleaning */
-int CleanPipe[2];
-
-/* Our relay: if_index followed by peer_mac */
-#define MY_RELAY_TAG_LEN (sizeof(int) + ETH_ALEN)
-
-/* Hack for daemonizing */
-#define CLOSEFD 64
-
-/**********************************************************************
-*%FUNCTION: keepDescriptor
-*%ARGUMENTS:
-* fd -- a file descriptor
-*%RETURNS:
-* 1 if descriptor should NOT be closed during daemonizing; 0 otherwise.
-***********************************************************************/
-static int
-keepDescriptor(int fd)
-{
- int i;
- if (fd == CleanPipe[0] || fd == CleanPipe[1]) return 1;
- for (i=0; i<NumInterfaces; i++) {
- if (fd == Interfaces[i].discoverySock ||
- fd == Interfaces[i].sessionSock) return 1;
- }
- return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: addTag
-*%ARGUMENTS:
-* packet -- a PPPoE packet
-* tag -- tag to add
-*%RETURNS:
-* -1 if no room in packet; number of bytes added otherwise.
-*%DESCRIPTION:
-* Inserts a tag as the first tag in a PPPoE packet.
-***********************************************************************/
-int
-addTag(PPPoEPacket *packet, PPPoETag const *tag)
-{
- return insertBytes(packet, packet->payload, tag,
- ntohs(tag->length) + TAG_HDR_SIZE);
-}
-
-/**********************************************************************
-*%FUNCTION: insertBytes
-*%ARGUMENTS:
-* packet -- a PPPoE packet
-* loc -- location at which to insert bytes of data
-* bytes -- the data to insert
-* len -- length of data to insert
-*%RETURNS:
-* -1 if no room in packet; len otherwise.
-*%DESCRIPTION:
-* Inserts "len" bytes of data at location "loc" in "packet", moving all
-* other data up to make room.
-***********************************************************************/
-int
-insertBytes(PPPoEPacket *packet,
- unsigned char *loc,
- void const *bytes,
- int len)
-{
- int toMove;
- int plen = ntohs(packet->length);
- /* Sanity checks */
- if (loc < packet->payload ||
- loc > packet->payload + plen ||
- len + plen > MAX_PPPOE_PAYLOAD) {
- return -1;
- }
-
- toMove = (packet->payload + plen) - loc;
- memmove(loc+len, loc, toMove);
- memcpy(loc, bytes, len);
- packet->length = htons(plen + len);
- return len;
-}
-
-/**********************************************************************
-*%FUNCTION: removeBytes
-*%ARGUMENTS:
-* packet -- a PPPoE packet
-* loc -- location at which to remove bytes of data
-* len -- length of data to remove
-*%RETURNS:
-* -1 if there was a problem, len otherwise
-*%DESCRIPTION:
-* Removes "len" bytes of data from location "loc" in "packet", moving all
-* other data down to close the gap
-***********************************************************************/
-int
-removeBytes(PPPoEPacket *packet,
- unsigned char *loc,
- int len)
-{
- int toMove;
- int plen = ntohs(packet->length);
- /* Sanity checks */
- if (len < 0 || len > plen ||
- loc < packet->payload ||
- loc + len > packet->payload + plen) {
- return -1;
- }
-
- toMove = ((packet->payload + plen) - loc) - len;
- memmove(loc, loc+len, toMove);
- packet->length = htons(plen - len);
- return len;
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- program name
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage information and exits.
-***********************************************************************/
-void
-usage(char const *argv0)
-{
- fprintf(stderr, "Usage: %s [options]\n", argv0);
- fprintf(stderr, "Options:\n");
- fprintf(stderr, " -S if_name -- Specify interface for PPPoE Server\n");
- fprintf(stderr, " -C if_name -- Specify interface for PPPoE Client\n");
- fprintf(stderr, " -B if_name -- Specify interface for both clients and server\n");
- fprintf(stderr, " -n nsess -- Maxmimum number of sessions to relay\n");
- fprintf(stderr, " -i timeout -- Idle timeout in seconds (0 = no timeout)\n");
- fprintf(stderr, " -F -- Do not fork into background\n");
- fprintf(stderr, " -h -- Print this help message\n");
-
- fprintf(stderr, "\nPPPoE Version %s, Copyright (C) 2001 Roaring Penguin Software Inc.\n", VERSION);
- fprintf(stderr, "PPPoE comes with ABSOLUTELY NO WARRANTY.\n");
- fprintf(stderr, "This is free software, and you are welcome to redistribute it under the terms\n");
- fprintf(stderr, "of the GNU General Public License, version 2 or any later version.\n");
- fprintf(stderr, "http://www.roaringpenguin.com\n");
- exit(EXIT_SUCCESS);
-}
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- usual suspects
-*%RETURNS:
-* EXIT_SUCCESS or EXIT_FAILURE
-*%DESCRIPTION:
-* Main program. Options:
-* -C ifname -- Use interface for PPPoE clients
-* -S ifname -- Use interface for PPPoE servers
-* -B ifname -- Use interface for both clients and servers
-* -n sessions -- Maximum of "n" sessions
-***********************************************************************/
-int
-main(int argc, char *argv[])
-{
- int opt;
- int nsess = DEFAULT_SESSIONS;
- struct sigaction sa;
- int beDaemon = 1;
- openlog("pppoe-relay", LOG_PID, LOG_DAEMON);
-
- while((opt = getopt(argc, argv, "hC:S:B:n:i:F")) != -1) {
- switch(opt) {
- case 'h':
- usage(argv[0]);
- break;
- case 'F':
- beDaemon = 0;
- break;
- case 'C':
- addInterface(optarg, 1, 0);
- break;
- case 'S':
- addInterface(optarg, 0, 1);
- break;
- case 'B':
- addInterface(optarg, 1, 1);
- break;
- case 'i':
- if (sscanf(optarg, "%u", &IdleTimeout) != 1) {
- fprintf(stderr, "Illegal argument to -i: should be -i timeout\n");
- exit(EXIT_FAILURE);
- }
- CleanPeriod = IdleTimeout / TIMEOUT_DIVISOR;
- if (CleanPeriod < MIN_CLEAN_PERIOD) CleanPeriod = MIN_CLEAN_PERIOD;
- break;
- case 'n':
- if (sscanf(optarg, "%d", &nsess) != 1) {
- fprintf(stderr, "Illegal argument to -n: should be -n #sessions\n");
- exit(EXIT_FAILURE);
- }
- if (nsess < 1 || nsess > 65534) {
- fprintf(stderr, "Illegal argument to -n: must range from 1 to 65534\n");
- exit(EXIT_FAILURE);
- }
- break;
- default:
- usage(argv[0]);
- }
- }
-
-#ifdef USE_LINUX_PACKET
-#ifndef HAVE_STRUCT_SOCKADDR_LL
- fprintf(stderr, "The PPPoE relay does not work on Linux 2.0 kernels.\n");
- exit(EXIT_FAILURE);
-#endif
-#endif
-
- /* Check that at least two interfaces were defined */
- if (NumInterfaces < 2) {
- fprintf(stderr, "%s: Must define at least two interfaces\n",
- argv[0]);
- exit(EXIT_FAILURE);
- }
-
- /* Make a pipe for the cleaner */
- if (pipe(CleanPipe) < 0) {
- fatalSys("pipe");
- }
-
- /* Set up alarm handler */
- sa.sa_handler = alarmHandler;
- sigemptyset(&sa.sa_mask);
- sa.sa_flags = SA_RESTART;
- if (sigaction(SIGALRM, &sa, NULL) < 0) {
- fatalSys("sigaction");
- }
-
- /* Allocate memory for sessions, etc. */
- initRelay(nsess);
-
- /* Daemonize -- UNIX Network Programming, Vol. 1, Stevens */
- if (beDaemon) {
- int i;
- i = fork();
- if (i < 0) {
- fatalSys("fork");
- } else if (i != 0) {
- /* parent */
- exit(0);
- }
- setsid();
- signal(SIGHUP, SIG_IGN);
- i = fork();
- if (i < 0) {
- fatalSys("fork");
- } else if (i != 0) {
- exit(0);
- }
-
- chdir("/");
- closelog();
- for (i=0; i<CLOSEFD; i++) {
- if (!keepDescriptor(i)) {
- close(i);
- }
- }
- /* We nuked our syslog descriptor... */
- openlog("pppoe-relay", LOG_PID, LOG_DAEMON);
- }
-
- /* Kick off SIGALRM if there is an idle timeout */
- if (IdleTimeout) alarm(1);
-
- /* Enter the relay loop */
- relayLoop();
-
- /* Shouldn't ever get here... */
- return EXIT_FAILURE;
-}
-
-/**********************************************************************
-*%FUNCTION: addInterface
-*%ARGUMENTS:
-* ifname -- interface name
-* clientOK -- true if this interface should relay PADI, PADR packets.
-* acOK -- true if this interface should relay PADO, PADS packets.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Opens an interface; sets up discovery and session sockets.
-***********************************************************************/
-void
-addInterface(char const *ifname,
- int clientOK,
- int acOK)
-{
- PPPoEInterface *i;
- if (NumInterfaces >= MAX_INTERFACES) {
- fprintf(stderr, "Too many interfaces (%d max)\n",
- MAX_INTERFACES);
- exit(EXIT_FAILURE);
- }
- i = &Interfaces[NumInterfaces++];
- strncpy(i->name, ifname, IFNAMSIZ);
- i->name[IFNAMSIZ] = 0;
-
- i->discoverySock = openInterface(ifname, Eth_PPPOE_Discovery, i->mac);
- i->sessionSock = openInterface(ifname, Eth_PPPOE_Session, NULL);
- i->clientOK = clientOK;
- i->acOK = acOK;
-}
-
-/**********************************************************************
-*%FUNCTION: initRelay
-*%ARGUMENTS:
-* nsess -- maximum allowable number of sessions
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Initializes relay hash table and session tables.
-***********************************************************************/
-void
-initRelay(int nsess)
-{
- int i;
- NumSessions = 0;
- MaxSessions = nsess;
-
- AllSessions = calloc(MaxSessions, sizeof(PPPoESession));
- if (!AllSessions) {
- rp_fatal("Unable to allocate memory for PPPoE session table");
- }
- AllHashes = calloc(MaxSessions*2, sizeof(SessionHash));
- if (!AllHashes) {
- rp_fatal("Unable to allocate memory for PPPoE hash table");
- }
-
- /* Initialize sessions in a linked list */
- AllSessions[0].prev = NULL;
- if (MaxSessions > 1) {
- AllSessions[0].next = &AllSessions[1];
- } else {
- AllSessions[0].next = NULL;
- }
- for (i=1; i<MaxSessions-1; i++) {
- AllSessions[i].prev = &AllSessions[i-1];
- AllSessions[i].next = &AllSessions[i+1];
- }
- if (MaxSessions > 1) {
- AllSessions[MaxSessions-1].prev = &AllSessions[MaxSessions-2];
- AllSessions[MaxSessions-1].next = NULL;
- }
-
- FreeSessions = AllSessions;
- ActiveSessions = NULL;
-
- /* Initialize session numbers which we hand out */
- for (i=0; i<MaxSessions; i++) {
- AllSessions[i].sesNum = htons((UINT16_t) i+1);
- }
-
- /* Initialize hashes in a linked list */
- AllHashes[0].prev = NULL;
- AllHashes[0].next = &AllHashes[1];
- for (i=1; i<2*MaxSessions-1; i++) {
- AllHashes[i].prev = &AllHashes[i-1];
- AllHashes[i].next = &AllHashes[i+1];
- }
- AllHashes[2*MaxSessions-1].prev = &AllHashes[2*MaxSessions-2];
- AllHashes[2*MaxSessions-1].next = NULL;
-
- FreeHashes = AllHashes;
-}
-
-/**********************************************************************
-*%FUNCTION: createSession
-*%ARGUMENTS:
-* ac -- Ethernet interface on access-concentrator side
-* cli -- Ethernet interface on client side
-* acMac -- Access concentrator's MAC address
-* cliMac -- Client's MAC address
-* acSess -- Access concentrator's session ID.
-*%RETURNS:
-* PPPoESession structure; NULL if one could not be allocated
-*%DESCRIPTION:
-* Initializes relay hash table and session tables.
-***********************************************************************/
-PPPoESession *
-createSession(PPPoEInterface const *ac,
- PPPoEInterface const *cli,
- unsigned char const *acMac,
- unsigned char const *cliMac,
- UINT16_t acSes)
-{
- PPPoESession *sess;
- SessionHash *acHash, *cliHash;
-
- if (NumSessions >= MaxSessions) {
- printErr("Maximum number of sessions reached -- cannot create new session");
- return NULL;
- }
-
- /* Grab a free session */
- sess = FreeSessions;
- FreeSessions = sess->next;
- NumSessions++;
-
- /* Link it to the active list */
- sess->next = ActiveSessions;
- if (sess->next) {
- sess->next->prev = sess;
- }
- ActiveSessions = sess;
- sess->prev = NULL;
-
- sess->epoch = Epoch;
-
- /* Get two hash entries */
- acHash = FreeHashes;
- cliHash = acHash->next;
- FreeHashes = cliHash->next;
-
- acHash->peer = cliHash;
- cliHash->peer = acHash;
-
- sess->acHash = acHash;
- sess->clientHash = cliHash;
-
- acHash->interface = ac;
- cliHash->interface = cli;
-
- memcpy(acHash->peerMac, acMac, ETH_ALEN);
- acHash->sesNum = acSes;
- acHash->ses = sess;
-
- memcpy(cliHash->peerMac, cliMac, ETH_ALEN);
- cliHash->sesNum = sess->sesNum;
- cliHash->ses = sess;
-
- addHash(acHash);
- addHash(cliHash);
-
- /* Log */
- syslog(LOG_INFO,
- "Opened session: server=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d), client=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d)",
- acHash->peerMac[0], acHash->peerMac[1],
- acHash->peerMac[2], acHash->peerMac[3],
- acHash->peerMac[4], acHash->peerMac[5],
- acHash->interface->name,
- ntohs(acHash->sesNum),
- cliHash->peerMac[0], cliHash->peerMac[1],
- cliHash->peerMac[2], cliHash->peerMac[3],
- cliHash->peerMac[4], cliHash->peerMac[5],
- cliHash->interface->name,
- ntohs(cliHash->sesNum));
-
- return sess;
-}
-
-/**********************************************************************
-*%FUNCTION: freeSession
-*%ARGUMENTS:
-* ses -- session to free
-* msg -- extra message to log on syslog.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Frees data used by a PPPoE session -- adds hashes and session back
-* to the free list
-***********************************************************************/
-void
-freeSession(PPPoESession *ses, char const *msg)
-{
- syslog(LOG_INFO,
- "Closed session: server=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d), client=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d): %s",
- ses->acHash->peerMac[0], ses->acHash->peerMac[1],
- ses->acHash->peerMac[2], ses->acHash->peerMac[3],
- ses->acHash->peerMac[4], ses->acHash->peerMac[5],
- ses->acHash->interface->name,
- ntohs(ses->acHash->sesNum),
- ses->clientHash->peerMac[0], ses->clientHash->peerMac[1],
- ses->clientHash->peerMac[2], ses->clientHash->peerMac[3],
- ses->clientHash->peerMac[4], ses->clientHash->peerMac[5],
- ses->clientHash->interface->name,
- ntohs(ses->clientHash->sesNum), msg);
-
- /* Unlink from active sessions */
- if (ses->prev) {
- ses->prev->next = ses->next;
- } else {
- ActiveSessions = ses->next;
- }
- if (ses->next) {
- ses->next->prev = ses->prev;
- }
-
- /* Link onto free list -- this is a singly-linked list, so
- we do not care about prev */
- ses->next = FreeSessions;
- FreeSessions = ses;
-
- unhash(ses->acHash);
- unhash(ses->clientHash);
- NumSessions--;
-}
-
-/**********************************************************************
-*%FUNCTION: unhash
-*%ARGUMENTS:
-* sh -- session hash to free
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Frees a session hash -- takes it out of hash table and puts it on
-* free list.
-***********************************************************************/
-void
-unhash(SessionHash *sh)
-{
- unsigned int b = hash(sh->peerMac, sh->sesNum) % HASHTAB_SIZE;
- if (sh->prev) {
- sh->prev->next = sh->next;
- } else {
- Buckets[b] = sh->next;
- }
-
- if (sh->next) {
- sh->next->prev = sh->prev;
- }
-
- /* Add to free list (singly-linked) */
- sh->next = FreeHashes;
- FreeHashes = sh;
-}
-
-/**********************************************************************
-*%FUNCTION: addHash
-*%ARGUMENTS:
-* sh -- a session hash
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Adds a SessionHash to the hash table
-***********************************************************************/
-void
-addHash(SessionHash *sh)
-{
- unsigned int b = hash(sh->peerMac, sh->sesNum) % HASHTAB_SIZE;
- sh->next = Buckets[b];
- sh->prev = NULL;
- if (sh->next) {
- sh->next->prev = sh;
- }
- Buckets[b] = sh;
-}
-
-/**********************************************************************
-*%FUNCTION: hash
-*%ARGUMENTS:
-* mac -- an Ethernet address
-* sesNum -- a session number
-*%RETURNS:
-* A hash value combining Ethernet address with session number.
-* Currently very simplistic; we may need to experiment with different
-* hash values.
-***********************************************************************/
-unsigned int
-hash(unsigned char const *mac, UINT16_t sesNum)
-{
- unsigned int ans1 =
- ((unsigned int) mac[0]) |
- (((unsigned int) mac[1]) << 8) |
- (((unsigned int) mac[2]) << 16) |
- (((unsigned int) mac[3]) << 24);
- unsigned int ans2 =
- ((unsigned int) sesNum) |
- (((unsigned int) mac[4]) << 16) |
- (((unsigned int) mac[5]) << 24);
- return ans1 ^ ans2;
-}
-
-/**********************************************************************
-*%FUNCTION: findSession
-*%ARGUMENTS:
-* mac -- an Ethernet address
-* sesNum -- a session number
-*%RETURNS:
-* The session hash for peer address "mac", session number sesNum
-***********************************************************************/
-SessionHash *
-findSession(unsigned char const *mac, UINT16_t sesNum)
-{
- unsigned int b = hash(mac, sesNum) % HASHTAB_SIZE;
- SessionHash *sh = Buckets[b];
- while(sh) {
- if (!memcmp(mac, sh->peerMac, ETH_ALEN) && sesNum == sh->sesNum) {
- return sh;
- }
- sh = sh->next;
- }
- return NULL;
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
- char buf[1024];
- sprintf(buf, "%.256s: %.256s", str, strerror(errno));
- printErr(buf);
- exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
- char buf[1024];
- sprintf(buf, "%.256s: %.256s", str, strerror(errno));
- printErr(buf);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
- printErr(str);
- exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: relayLoop
-*%ARGUMENTS:
-* None
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Runs the relay loop. This function never returns
-***********************************************************************/
-void
-relayLoop()
-{
- fd_set readable, readableCopy;
- int maxFD;
- int i, r;
- int sock;
-
- /* Build the select set */
- FD_ZERO(&readable);
- maxFD = 0;
- for (i=0; i<NumInterfaces; i++) {
- sock = Interfaces[i].discoverySock;
- if (sock > maxFD) maxFD = sock;
- FD_SET(sock, &readable);
- sock = Interfaces[i].sessionSock;
- if (sock > maxFD) maxFD = sock;
- FD_SET(sock, &readable);
- if (CleanPipe[0] > maxFD) maxFD = CleanPipe[0];
- FD_SET(CleanPipe[0], &readable);
- }
- maxFD++;
- for(;;) {
- readableCopy = readable;
- for(;;) {
- r = select(maxFD, &readableCopy, NULL, NULL, NULL);
- if (r >= 0 || errno != EINTR) break;
- }
- if (r < 0) {
- sysErr("select (relayLoop)");
- continue;
- }
-
- /* Handle session packets first */
- for (i=0; i<NumInterfaces; i++) {
- if (FD_ISSET(Interfaces[i].sessionSock, &readableCopy)) {
- relayGotSessionPacket(&Interfaces[i]);
- }
- }
-
- /* Now handle discovery packets */
- for (i=0; i<NumInterfaces; i++) {
- if (FD_ISSET(Interfaces[i].discoverySock, &readableCopy)) {
- relayGotDiscoveryPacket(&Interfaces[i]);
- }
- }
-
- /* Handle the session-cleaning process */
- if (FD_ISSET(CleanPipe[0], &readableCopy)) {
- char dummy;
- CleanCounter = 0;
- read(CleanPipe[0], &dummy, 1);
- if (IdleTimeout) cleanSessions();
- }
- }
-}
-
-/**********************************************************************
-*%FUNCTION: relayGotDiscoveryPacket
-*%ARGUMENTS:
-* iface -- interface on which packet is waiting
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a discovery packet.
-***********************************************************************/
-void
-relayGotDiscoveryPacket(PPPoEInterface const *iface)
-{
- PPPoEPacket packet;
- int size;
-
- if (receivePacket(iface->discoverySock, &packet, &size) < 0) {
- return;
- }
- /* Ignore unknown code/version */
- if (packet.ver != 1 || packet.type != 1) {
- return;
- }
-
- /* Validate length */
- if (ntohs(packet.length) + HDR_SIZE > size) {
- syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
- (unsigned int) ntohs(packet.length));
- return;
- }
-
- /* Drop Ethernet frame padding */
- if (size > ntohs(packet.length) + HDR_SIZE) {
- size = ntohs(packet.length) + HDR_SIZE;
- }
-
- switch(packet.code) {
- case CODE_PADT:
- relayHandlePADT(iface, &packet, size);
- break;
- case CODE_PADI:
- relayHandlePADI(iface, &packet, size);
- break;
- case CODE_PADO:
- relayHandlePADO(iface, &packet, size);
- break;
- case CODE_PADR:
- relayHandlePADR(iface, &packet, size);
- break;
- case CODE_PADS:
- relayHandlePADS(iface, &packet, size);
- break;
- default:
- syslog(LOG_ERR, "Discovery packet on %s with unknown code %d",
- iface->name, (int) packet.code);
- }
-}
-
-/**********************************************************************
-*%FUNCTION: relayGotSessionPacket
-*%ARGUMENTS:
-* iface -- interface on which packet is waiting
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a session packet.
-***********************************************************************/
-void
-relayGotSessionPacket(PPPoEInterface const *iface)
-{
- PPPoEPacket packet;
- int size;
- SessionHash *sh;
- PPPoESession *ses;
-
- if (receivePacket(iface->sessionSock, &packet, &size) < 0) {
- return;
- }
-
- /* Ignore unknown code/version */
- if (packet.ver != 1 || packet.type != 1) {
- return;
- }
-
- /* Must be a session packet */
- if (packet.code != CODE_SESS) {
- syslog(LOG_ERR, "Session packet with code %d", (int) packet.code);
- return;
- }
-
- /* Ignore session packets whose destination address isn't ours */
- if (memcmp(packet.ethHdr.h_dest, iface->mac, ETH_ALEN)) {
- return;
- }
-
- /* Validate length */
- if (ntohs(packet.length) + HDR_SIZE > size) {
- syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
- (unsigned int) ntohs(packet.length));
- return;
- }
-
- /* Drop Ethernet frame padding */
- if (size > ntohs(packet.length) + HDR_SIZE) {
- size = ntohs(packet.length) + HDR_SIZE;
- }
-
- /* We're in business! Find the hash */
- sh = findSession(packet.ethHdr.h_source, packet.session);
- if (!sh) {
- /* Don't log this. Someone could be running the client and the
- relay on the same box. */
- return;
- }
-
- /* Relay it */
- ses = sh->ses;
- ses->epoch = Epoch;
- sh = sh->peer;
- packet.session = sh->sesNum;
- memcpy(packet.ethHdr.h_source, sh->interface->mac, ETH_ALEN);
- memcpy(packet.ethHdr.h_dest, sh->peerMac, ETH_ALEN);
-#if 0
- fprintf(stderr, "Relaying %02x:%02x:%02x:%02x:%02x:%02x(%s:%d) to %02x:%02x:%02x:%02x:%02x:%02x(%s:%d)\n",
- sh->peer->peerMac[0], sh->peer->peerMac[1], sh->peer->peerMac[2],
- sh->peer->peerMac[3], sh->peer->peerMac[4], sh->peer->peerMac[5],
- sh->peer->interface->name, ntohs(sh->peer->sesNum),
- sh->peerMac[0], sh->peerMac[1], sh->peerMac[2],
- sh->peerMac[3], sh->peerMac[4], sh->peerMac[5],
- sh->interface->name, ntohs(sh->sesNum));
-#endif
- sendPacket(NULL, sh->interface->sessionSock, &packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADT
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADT packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADT packet.
-***********************************************************************/
-void
-relayHandlePADT(PPPoEInterface const *iface,
- PPPoEPacket *packet,
- int size)
-{
- SessionHash *sh;
- PPPoESession *ses;
-
- sh = findSession(packet->ethHdr.h_source, packet->session);
- if (!sh) {
- return;
- }
- /* Relay the PADT to the peer */
- sh = sh->peer;
- ses = sh->ses;
- packet->session = sh->sesNum;
- memcpy(packet->ethHdr.h_source, sh->interface->mac, ETH_ALEN);
- memcpy(packet->ethHdr.h_dest, sh->peerMac, ETH_ALEN);
- sendPacket(NULL, sh->interface->sessionSock, packet, size);
-
- /* Destroy the session */
- freeSession(ses, "Received PADT");
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADI
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADI packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADI packet.
-***********************************************************************/
-void
-relayHandlePADI(PPPoEInterface const *iface,
- PPPoEPacket *packet,
- int size)
-{
- PPPoETag tag;
- unsigned char *loc;
- int i, r;
-
- int ifIndex;
-
- /* Can a client legally be behind this interface? */
- if (!iface->clientOK) {
- syslog(LOG_ERR,
- "PADI packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Source address must be unicast */
- if (NOT_UNICAST(packet->ethHdr.h_source)) {
- syslog(LOG_ERR,
- "PADI packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Destination address must be broadcast */
- if (NOT_BROADCAST(packet->ethHdr.h_dest)) {
- syslog(LOG_ERR,
- "PADI packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not to a broadcast address",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Get array index of interface */
- ifIndex = iface - Interfaces;
-
- loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
- if (!loc) {
- tag.type = htons(TAG_RELAY_SESSION_ID);
- tag.length = htons(MY_RELAY_TAG_LEN);
- memcpy(tag.payload, &ifIndex, sizeof(ifIndex));
- memcpy(tag.payload+sizeof(ifIndex), packet->ethHdr.h_source, ETH_ALEN);
- /* Add a relay tag if there's room */
- r = addTag(packet, &tag);
- if (r < 0) return;
- size += r;
- } else {
- /* We do not re-use relay-id tags. Drop the frame. The RFC says the
- relay agent SHOULD return a Generic-Error tag, but this does not
- make sense for PADI packets. */
- return;
- }
-
- /* Broadcast the PADI on all AC-capable interfaces except the interface
- on which it came */
- for (i=0; i < NumInterfaces; i++) {
- if (iface == &Interfaces[i]) continue;
- if (!Interfaces[i].acOK) continue;
- memcpy(packet->ethHdr.h_source, Interfaces[i].mac, ETH_ALEN);
- sendPacket(NULL, Interfaces[i].discoverySock, packet, size);
- }
-
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADO
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADO packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADO packet.
-***********************************************************************/
-void
-relayHandlePADO(PPPoEInterface const *iface,
- PPPoEPacket *packet,
- int size)
-{
- PPPoETag tag;
- unsigned char *loc;
- int ifIndex;
- int acIndex;
-
- /* Can a server legally be behind this interface? */
- if (!iface->acOK) {
- syslog(LOG_ERR,
- "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- acIndex = iface - Interfaces;
-
- /* Source address must be unicast */
- if (NOT_UNICAST(packet->ethHdr.h_source)) {
- syslog(LOG_ERR,
- "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Destination address must be interface's MAC address */
- if (memcmp(packet->ethHdr.h_dest, iface->mac, ETH_ALEN)) {
- return;
- }
-
- /* Find relay tag */
- loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
- if (!loc) {
- syslog(LOG_ERR,
- "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have Relay-Session-Id tag",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* If it's the wrong length, ignore it */
- if (ntohs(tag.length) != MY_RELAY_TAG_LEN) {
- syslog(LOG_ERR,
- "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have correct length Relay-Session-Id tag",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Extract interface index */
- memcpy(&ifIndex, tag.payload, sizeof(ifIndex));
-
- if (ifIndex < 0 || ifIndex >= NumInterfaces ||
- !Interfaces[ifIndex].clientOK ||
- iface == &Interfaces[ifIndex]) {
- syslog(LOG_ERR,
- "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s has invalid interface in Relay-Session-Id tag",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Replace Relay-ID tag with opposite-direction tag */
- memcpy(loc+TAG_HDR_SIZE, &acIndex, sizeof(acIndex));
- memcpy(loc+TAG_HDR_SIZE+sizeof(ifIndex), packet->ethHdr.h_source, ETH_ALEN);
-
- /* Set destination address to MAC address in relay ID */
- memcpy(packet->ethHdr.h_dest, tag.payload + sizeof(ifIndex), ETH_ALEN);
-
- /* Set source address to MAC address of interface */
- memcpy(packet->ethHdr.h_source, Interfaces[ifIndex].mac, ETH_ALEN);
-
- /* Send the PADO to the proper client */
- sendPacket(NULL, Interfaces[ifIndex].discoverySock, packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADR
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADR packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADR packet.
-***********************************************************************/
-void
-relayHandlePADR(PPPoEInterface const *iface,
- PPPoEPacket *packet,
- int size)
-{
- PPPoETag tag;
- unsigned char *loc;
- int ifIndex;
- int cliIndex;
-
- /* Can a client legally be behind this interface? */
- if (!iface->clientOK) {
- syslog(LOG_ERR,
- "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- cliIndex = iface - Interfaces;
-
- /* Source address must be unicast */
- if (NOT_UNICAST(packet->ethHdr.h_source)) {
- syslog(LOG_ERR,
- "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Destination address must be interface's MAC address */
- if (memcmp(packet->ethHdr.h_dest, iface->mac, ETH_ALEN)) {
- return;
- }
-
- /* Find relay tag */
- loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
- if (!loc) {
- syslog(LOG_ERR,
- "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have Relay-Session-Id tag",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* If it's the wrong length, ignore it */
- if (ntohs(tag.length) != MY_RELAY_TAG_LEN) {
- syslog(LOG_ERR,
- "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have correct length Relay-Session-Id tag",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Extract interface index */
- memcpy(&ifIndex, tag.payload, sizeof(ifIndex));
-
- if (ifIndex < 0 || ifIndex >= NumInterfaces ||
- !Interfaces[ifIndex].acOK ||
- iface == &Interfaces[ifIndex]) {
- syslog(LOG_ERR,
- "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s has invalid interface in Relay-Session-Id tag",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Replace Relay-ID tag with opposite-direction tag */
- memcpy(loc+TAG_HDR_SIZE, &cliIndex, sizeof(cliIndex));
- memcpy(loc+TAG_HDR_SIZE+sizeof(ifIndex), packet->ethHdr.h_source, ETH_ALEN);
-
- /* Set destination address to MAC address in relay ID */
- memcpy(packet->ethHdr.h_dest, tag.payload + sizeof(ifIndex), ETH_ALEN);
-
- /* Set source address to MAC address of interface */
- memcpy(packet->ethHdr.h_source, Interfaces[ifIndex].mac, ETH_ALEN);
-
- /* Send the PADR to the proper access concentrator */
- sendPacket(NULL, Interfaces[ifIndex].discoverySock, packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADS
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADS packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADS packet.
-***********************************************************************/
-void
-relayHandlePADS(PPPoEInterface const *iface,
- PPPoEPacket *packet,
- int size)
-{
- PPPoETag tag;
- unsigned char *loc;
- int ifIndex;
- int acIndex;
- PPPoESession *ses = NULL;
- SessionHash *sh;
-
- /* Can a server legally be behind this interface? */
- if (!iface->acOK) {
- syslog(LOG_ERR,
- "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- acIndex = iface - Interfaces;
-
- /* Source address must be unicast */
- if (NOT_UNICAST(packet->ethHdr.h_source)) {
- syslog(LOG_ERR,
- "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Destination address must be interface's MAC address */
- if (memcmp(packet->ethHdr.h_dest, iface->mac, ETH_ALEN)) {
- return;
- }
-
- /* Find relay tag */
- loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
- if (!loc) {
- syslog(LOG_ERR,
- "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have Relay-Session-Id tag",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* If it's the wrong length, ignore it */
- if (ntohs(tag.length) != MY_RELAY_TAG_LEN) {
- syslog(LOG_ERR,
- "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have correct length Relay-Session-Id tag",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* Extract interface index */
- memcpy(&ifIndex, tag.payload, sizeof(ifIndex));
-
- if (ifIndex < 0 || ifIndex >= NumInterfaces ||
- !Interfaces[ifIndex].clientOK ||
- iface == &Interfaces[ifIndex]) {
- syslog(LOG_ERR,
- "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s has invalid interface in Relay-Session-Id tag",
- packet->ethHdr.h_source[0],
- packet->ethHdr.h_source[1],
- packet->ethHdr.h_source[2],
- packet->ethHdr.h_source[3],
- packet->ethHdr.h_source[4],
- packet->ethHdr.h_source[5],
- iface->name);
- return;
- }
-
- /* If session ID is zero, it's the AC respoding with an error.
- Just relay it; do not create a session */
- if (packet->session != htons(0)) {
- /* Check for existing session */
- sh = findSession(packet->ethHdr.h_source, packet->session);
- if (sh) ses = sh->ses;
-
- /* If already an existing session, assume it's a duplicate PADS. Send
- the frame, but do not create a new session. Is this the right
- thing to do? Arguably, should send an error to the client and
- a PADT to the server, because this could happen due to a
- server crash and reboot. */
-
- if (!ses) {
- /* Create a new session */
- ses = createSession(iface, &Interfaces[ifIndex],
- packet->ethHdr.h_source,
- loc + TAG_HDR_SIZE + sizeof(ifIndex), packet->session);
- if (!ses) {
- /* Can't allocate session -- send error PADS to client and
- PADT to server */
- PPPoETag hostUniq, *hu;
- if (findTag(packet, TAG_HOST_UNIQ, &hostUniq)) {
- hu = &hostUniq;
- } else {
- hu = NULL;
- }
- relaySendError(CODE_PADS, htons(0), &Interfaces[ifIndex],
- loc + TAG_HDR_SIZE + sizeof(ifIndex),
- hu, "RP-PPPoE: Relay: Unable to allocate session");
- relaySendError(CODE_PADT, packet->session, iface,
- packet->ethHdr.h_source, NULL,
- "RP-PPPoE: Relay: Unable to allocate session");
- return;
- }
- }
- /* Replace session number */
- packet->session = ses->sesNum;
- }
-
- /* Remove relay-ID tag */
- removeBytes(packet, loc, MY_RELAY_TAG_LEN + TAG_HDR_SIZE);
- size -= (MY_RELAY_TAG_LEN + TAG_HDR_SIZE);
-
- /* Set destination address to MAC address in relay ID */
- memcpy(packet->ethHdr.h_dest, tag.payload + sizeof(ifIndex), ETH_ALEN);
-
- /* Set source address to MAC address of interface */
- memcpy(packet->ethHdr.h_source, Interfaces[ifIndex].mac, ETH_ALEN);
-
- /* Send the PADS to the proper client */
- sendPacket(NULL, Interfaces[ifIndex].discoverySock, packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relaySendError
-*%ARGUMENTS:
-* code -- PPPoE packet code (PADS or PADT, typically)
-* session -- PPPoE session number
-* iface -- interface on which to send frame
-* mac -- Ethernet address to which frame should be sent
-* hostUniq -- if non-NULL, a hostUniq tag to add to error frame
-* errMsg -- error message to insert into Generic-Error tag.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends either a PADS or PADT packet with a Generic-Error tag and an
-* error message.
-***********************************************************************/
-void
-relaySendError(unsigned char code,
- UINT16_t session,
- PPPoEInterface const *iface,
- unsigned char const *mac,
- PPPoETag const *hostUniq,
- char const *errMsg)
-{
- PPPoEPacket packet;
- PPPoETag errTag;
- int size;
-
- memcpy(packet.ethHdr.h_source, iface->mac, ETH_ALEN);
- memcpy(packet.ethHdr.h_dest, mac, ETH_ALEN);
- packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
- packet.type = 1;
- packet.ver = 1;
- packet.code = code;
- packet.session = session;
- packet.length = htons(0);
- if (hostUniq) {
- if (addTag(&packet, hostUniq) < 0) return;
- }
- errTag.type = htons(TAG_GENERIC_ERROR);
- errTag.length = htons(strlen(errMsg));
- strcpy(errTag.payload, errMsg);
- if (addTag(&packet, &errTag) < 0) return;
- size = ntohs(packet.length) + HDR_SIZE;
- if (code == CODE_PADT) {
- sendPacket(NULL, iface->discoverySock, &packet, size);
- } else {
- sendPacket(NULL, iface->sessionSock, &packet, size);
- }
-}
-
-/**********************************************************************
-*%FUNCTION: alarmHandler
-*%ARGUMENTS:
-* sig -- signal number
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* SIGALRM handler. Increments Epoch; if necessary, writes a byte of
-* data to the alarm pipe to trigger the stale-session cleaner.
-***********************************************************************/
-void
-alarmHandler(int sig)
-{
- alarm(1);
- Epoch++;
- CleanCounter++;
- if (CleanCounter == CleanPeriod) {
- write(CleanPipe[1], "", 1);
- }
-}
-
-/**********************************************************************
-*%FUNCTION: cleanSessions
-*%ARGUMENTS:
-* None
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Goes through active sessions and cleans sessions idle for longer
-* than IdleTimeout seconds.
-***********************************************************************/
-void cleanSessions(void)
-{
- PPPoESession *cur, *next;
- cur = ActiveSessions;
- while(cur) {
- next = cur->next;
- if (Epoch - cur->epoch > IdleTimeout) {
- /* Send PADT to each peer */
- relaySendError(CODE_PADT, cur->acHash->sesNum,
- cur->acHash->interface,
- cur->acHash->peerMac, NULL,
- "RP-PPPoE: Relay: Session exceeded idle timeout");
- relaySendError(CODE_PADT, cur->clientHash->sesNum,
- cur->clientHash->interface,
- cur->clientHash->peerMac, NULL,
- "RP-PPPoE: Relay: Session exceeded idle timeout");
- freeSession(cur, "Idle Timeout");
- }
- cur = next;
- }
-}
diff --git a/mdk-stage1/rp-pppoe/src/relay.h b/mdk-stage1/rp-pppoe/src/relay.h
deleted file mode 100644
index d438a657f..000000000
--- a/mdk-stage1/rp-pppoe/src/relay.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/**********************************************************************
-*
-* relay.h
-*
-* Definitions for PPPoE relay
-*
-* Copyright (C) 2001 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-
-#include "pppoe.h"
-
-/* Description for each active Ethernet interface */
-typedef struct InterfaceStruct {
- char name[IFNAMSIZ+1]; /* Interface name */
- int discoverySock; /* Socket for discovery frames */
- int sessionSock; /* Socket for session frames */
- int clientOK; /* Client requests allowed (PADI, PADR) */
- int acOK; /* AC replies allowed (PADO, PADS) */
- unsigned char mac[ETH_ALEN]; /* MAC address */
-} PPPoEInterface;
-
-/* Session state for relay */
-struct SessionHashStruct;
-typedef struct SessionStruct {
- struct SessionStruct *next; /* Free list link */
- struct SessionStruct *prev; /* Free list link */
- struct SessionHashStruct *acHash; /* Hash bucket for AC MAC/Session */
- struct SessionHashStruct *clientHash; /* Hash bucket for client MAC/Session */
- unsigned int epoch; /* Epoch when last activity was seen */
- UINT16_t sesNum; /* Session number assigned by relay */
-} PPPoESession;
-
-/* Hash table entry to find sessions */
-typedef struct SessionHashStruct {
- struct SessionHashStruct *next; /* Link in hash chain */
- struct SessionHashStruct *prev; /* Link in hash chain */
- struct SessionHashStruct *peer; /* Peer for this session */
- PPPoEInterface const *interface; /* Interface */
- unsigned char peerMac[ETH_ALEN]; /* Peer's MAC address */
- UINT16_t sesNum; /* Session number */
- PPPoESession *ses; /* Session data */
-} SessionHash;
-
-/* Function prototypes */
-
-void relayGotSessionPacket(PPPoEInterface const *i);
-void relayGotDiscoveryPacket(PPPoEInterface const *i);
-PPPoEInterface *findInterface(int sock);
-unsigned int hash(unsigned char const *mac, UINT16_t sesNum);
-SessionHash *findSession(unsigned char const *mac, UINT16_t sesNum);
-void deleteHash(SessionHash *hash);
-PPPoESession *createSession(PPPoEInterface const *ac,
- PPPoEInterface const *cli,
- unsigned char const *acMac,
- unsigned char const *cliMac,
- UINT16_t acSes);
-void freeSession(PPPoESession *ses, char const *msg);
-void addInterface(char const *ifname, int clientOK, int acOK);
-void usage(char const *progname);
-void initRelay(int nsess);
-void relayLoop(void);
-void addHash(SessionHash *sh);
-void unhash(SessionHash *sh);
-
-void relayHandlePADT(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADI(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADO(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADR(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADS(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-
-int addTag(PPPoEPacket *packet, PPPoETag const *tag);
-int insertBytes(PPPoEPacket *packet, unsigned char *loc,
- void const *bytes, int length);
-int removeBytes(PPPoEPacket *packet, unsigned char *loc,
- int length);
-void relaySendError(unsigned char code,
- UINT16_t session,
- PPPoEInterface const *iface,
- unsigned char const *mac,
- PPPoETag const *hostUniq,
- char const *errMsg);
-
-void alarmHandler(int sig);
-void cleanSessions(void);
-
-#define MAX_INTERFACES 8
-#define DEFAULT_SESSIONS 5000
-
-/* Hash table size -- a prime number; gives load factor of around 6
- for 65534 sessions */
-#define HASHTAB_SIZE 18917
diff --git a/mdk-stage1/slang/Makefile b/mdk-stage1/slang/Makefile
deleted file mode 100644
index 4cd1dc6bb..000000000
--- a/mdk-stage1/slang/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libslang
-
-OBJS = sltermin.o sldisply.o slutty.o slang.o slarray.o slclass.o slcmd.o slerr.o slgetkey.o slkeymap.o slmalloc.o slmath.o slmemchr.o slmemcmp.o slmemcpy.o slmemset.o slmisc.o slparse.o slprepr.o slregexp.o slrline.o slsearch.o slsmg.o slstd.o sltoken.o sltypes.o slxstrng.o slcurses.o slscroll.o slsignal.o slkeypad.o slerrno.o slstring.o slstruct.o slcmplex.o slarrfun.o slimport.o slpath.o slarith.o slassoc.o slcompat.o slposdir.o slstdio.o slproc.o sltime.o slstrops.o slbstr.o slpack.o slintall.o slistruc.o slposio.o slnspace.o slarrmis.o slospath.o slscanf.o
-
-DEFS = -Dunix -DSLANG
-
-INCS =
-
-
-TARGETS = $(LIBNAME).a
-
-ifeq (DIETLIBC, $(L))
-TARGETS += $(LIBNAME)-DIET.a
-endif
-
-all: $(TARGETS)
-
-clean:
- rm -f *.o *.a
-
-OBJS-DIET = $(subst .o,-DIET.o,$(OBJS))
-
-$(LIBNAME).a: $(OBJS)
- ar -cru $@ $^
- ranlib $@
-
-$(LIBNAME)-DIET.a: $(OBJS-DIET)
- ar -cru $@ $^
- ranlib $@
-
-$(OBJS): %.o: %.c
- gcc $(CFLAGS) $(DEFS) $(INCS) $(GLIBC_INCLUDES) -c $< -o $@
-
-$(OBJS-DIET): %-DIET.o: %.c
- gcc $(CFLAGS) $(DEFS) $(INCS) $(DIETLIBC_INCLUDES) -c $< -o $@
-
diff --git a/mdk-stage1/slang/_slang.h b/mdk-stage1/slang/_slang.h
deleted file mode 100644
index 02ee13505..000000000
--- a/mdk-stage1/slang/_slang.h
+++ /dev/null
@@ -1,743 +0,0 @@
-#ifndef _PRIVATE_SLANG_H_
-#define _PRIVATE_SLANG_H_
-/* header file for S-Lang internal structures that users do not (should not)
- need. Use slang.h for that purpose. */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* #include "config.h" */
-#include "jdmacros.h"
-#include "sllimits.h"
-
-#ifdef VMS
-# define SLANG_SYSTEM_NAME "_VMS"
-#else
-# if defined (IBMPC_SYSTEM)
-# define SLANG_SYSTEM_NAME "_IBMPC"
-# else
-# define SLANG_SYSTEM_NAME "_UNIX"
-# endif
-#endif /* VMS */
-
-/* These quantities are main_types for byte-compiled code. They are used
- * by the inner_interp routine. The _BC_ means byte-code.
- */
-
-#define _SLANG_BC_LVARIABLE SLANG_LVARIABLE /* 0x01 */
-#define _SLANG_BC_GVARIABLE SLANG_GVARIABLE /* 0x02 */
-#define _SLANG_BC_IVARIABLE SLANG_IVARIABLE /* 0x03 */
-#define _SLANG_BC_RVARIABLE SLANG_RVARIABLE /* 0x04 */
-#define _SLANG_BC_INTRINSIC SLANG_INTRINSIC /* 0x05 */
-#define _SLANG_BC_FUNCTION SLANG_FUNCTION /* 0x06 */
-#define _SLANG_BC_MATH_UNARY SLANG_MATH_UNARY /* 0x07 */
-#define _SLANG_BC_APP_UNARY SLANG_APP_UNARY /* 0x08 */
-#define _SLANG_BC_ICONST SLANG_ICONSTANT /* 0x09 */
-#define _SLANG_BC_DCONST SLANG_DCONSTANT /* 0x0A */
-#define _SLANG_BC_PVARIABLE SLANG_PVARIABLE /* 0x0B */
-#define _SLANG_BC_PFUNCTION SLANG_PFUNCTION /* 0x0C */
-
-#define _SLANG_BC_BINARY 0x10
-#define _SLANG_BC_LITERAL 0x11 /* constant objects */
-#define _SLANG_BC_LITERAL_INT 0x12
-#define _SLANG_BC_LITERAL_STR 0x13
-#define _SLANG_BC_BLOCK 0x14
-
-/* These 3 MUST be in this order too ! */
-#define _SLANG_BC_RETURN 0x15
-#define _SLANG_BC_BREAK 0x16
-#define _SLANG_BC_CONTINUE 0x17
-
-#define _SLANG_BC_EXCH 0x18
-#define _SLANG_BC_LABEL 0x19
-#define _SLANG_BC_LOBJPTR 0x1A
-#define _SLANG_BC_GOBJPTR 0x1B
-#define _SLANG_BC_X_ERROR 0x1C
-/* These must be in this order */
-#define _SLANG_BC_X_USER0 0x1D
-#define _SLANG_BC_X_USER1 0x1E
-#define _SLANG_BC_X_USER2 0x1F
-#define _SLANG_BC_X_USER3 0x20
-#define _SLANG_BC_X_USER4 0x21
-
-#define _SLANG_BC_CALL_DIRECT 0x24
-#define _SLANG_BC_CALL_DIRECT_FRAME 0x25
-#define _SLANG_BC_UNARY 0x26
-#define _SLANG_BC_UNARY_FUNC 0x27
-
-#define _SLANG_BC_DEREF_ASSIGN 0x30
-#define _SLANG_BC_SET_LOCAL_LVALUE 0x31
-#define _SLANG_BC_SET_GLOBAL_LVALUE 0x32
-#define _SLANG_BC_SET_INTRIN_LVALUE 0x33
-#define _SLANG_BC_SET_STRUCT_LVALUE 0x34
-#define _SLANG_BC_FIELD 0x35
-#define _SLANG_BC_SET_ARRAY_LVALUE 0x36
-
-#define _SLANG_BC_LINE_NUM 0x40
-
-#define _SLANG_BC_TMP 0x50
-#define _SLANG_BC_LVARIABLE_AGET 0x60
-#define _SLANG_BC_LVARIABLE_APUT 0x61
-#define _SLANG_BC_INTEGER_PLUS 0x62
-#define _SLANG_BC_INTEGER_MINUS 0x63
-#define _SLANG_BC_ARG_LVARIABLE 0x64
-#define _SLANG_BC_EARG_LVARIABLE 0x65
-
-#define _SLANG_BC_CALL_DIRECT_INTRINSIC 0x80
-#define _SLANG_BC_INTRINSIC_CALL_DIRECT 0x81
-#define _SLANG_BC_CALL_DIRECT_LSTR 0x82
-#define _SLANG_BC_CALL_DIRECT_SLFUN 0x83
-#define _SLANG_BC_CALL_DIRECT_INTRSTOP 0x84
-#define _SLANG_BC_INTRINSIC_STOP 0x85
-#define _SLANG_BC_CALL_DIRECT_EARG_LVAR 0x86
-#define _SLANG_BC_CALL_DIRECT_LINT 0x87
-#define _SLANG_BC_CALL_DIRECT_LVAR 0x88
-
-
-/* Byte-Code Sub Types (_BCST_) */
-
-/* These are sub_types of _SLANG_BC_BLOCK */
-#define _SLANG_BCST_ERROR_BLOCK 0x01
-#define _SLANG_BCST_EXIT_BLOCK 0x02
-#define _SLANG_BCST_USER_BLOCK0 0x03
-#define _SLANG_BCST_USER_BLOCK1 0x04
-#define _SLANG_BCST_USER_BLOCK2 0x05
-#define _SLANG_BCST_USER_BLOCK3 0x06
-#define _SLANG_BCST_USER_BLOCK4 0x07
-/* The user blocks MUST be in the above order */
-#define _SLANG_BCST_LOOP 0x10
-#define _SLANG_BCST_WHILE 0x11
-#define _SLANG_BCST_FOR 0x12
-#define _SLANG_BCST_FOREVER 0x13
-#define _SLANG_BCST_CFOR 0x14
-#define _SLANG_BCST_DOWHILE 0x15
-#define _SLANG_BCST_FOREACH 0x16
-
-#define _SLANG_BCST_IF 0x20
-#define _SLANG_BCST_IFNOT 0x21
-#define _SLANG_BCST_ELSE 0x22
-#define _SLANG_BCST_ANDELSE 0x23
-#define _SLANG_BCST_ORELSE 0x24
-#define _SLANG_BCST_SWITCH 0x25
-#define _SLANG_BCST_NOTELSE 0x26
-
-/* assignment (_SLANG_BC_SET_*_LVALUE) subtypes. The order MUST correspond
- * to the assignment token order with the ASSIGN_TOKEN as the first!
- */
-#define _SLANG_BCST_ASSIGN 0x01
-#define _SLANG_BCST_PLUSEQS 0x02
-#define _SLANG_BCST_MINUSEQS 0x03
-#define _SLANG_BCST_TIMESEQS 0x04
-#define _SLANG_BCST_DIVEQS 0x05
-#define _SLANG_BCST_BOREQS 0x06
-#define _SLANG_BCST_BANDEQS 0x07
-#define _SLANG_BCST_PLUSPLUS 0x08
-#define _SLANG_BCST_POST_PLUSPLUS 0x09
-#define _SLANG_BCST_MINUSMINUS 0x0A
-#define _SLANG_BCST_POST_MINUSMINUS 0x0B
-
-/* These use SLANG_PLUS, SLANG_MINUS, SLANG_PLUSPLUS, etc... */
-
-typedef union
-{
-#if SLANG_HAS_FLOAT
- double double_val;
- float float_val;
-#endif
- long long_val;
- unsigned long ulong_val;
- VOID_STAR ptr_val;
- char *s_val;
- int int_val;
- unsigned int uint_val;
- SLang_MMT_Type *ref;
- SLang_Name_Type *n_val;
- struct _SLang_Struct_Type *struct_val;
- struct _SLang_Array_Type *array_val;
- short short_val;
- unsigned short ushort_val;
- char char_val;
- unsigned char uchar_val;
-}
-_SL_Object_Union_Type;
-
-typedef struct _SLang_Object_Type
-{
- unsigned char data_type; /* SLANG_INT_TYPE, ... */
- _SL_Object_Union_Type v;
-}
-SLang_Object_Type;
-
-struct _SLang_MMT_Type
-{
- unsigned char data_type; /* int, string, etc... */
- VOID_STAR user_data; /* address of user structure */
- unsigned int count; /* number of references */
-};
-
-extern int _SLang_pop_object_of_type (unsigned char, SLang_Object_Type *, int);
-
-typedef struct
-{
- char *name; /* slstring */
- SLang_Object_Type obj;
-}
-_SLstruct_Field_Type;
-
-typedef struct _SLang_Struct_Type
-{
- _SLstruct_Field_Type *fields;
- unsigned int nfields; /* number used */
- unsigned int num_refs;
-}
-_SLang_Struct_Type;
-
-extern void _SLstruct_delete_struct (_SLang_Struct_Type *);
-extern int _SLang_push_struct (_SLang_Struct_Type *);
-extern int _SLang_pop_struct (_SLang_Struct_Type **);
-extern int _SLstruct_init (void);
-/* extern int _SLstruct_get_field (char *); */
-extern int _SLstruct_define_struct (void);
-extern int _SLstruct_define_typedef (void);
-
-extern int _SLang_pop_datatype (unsigned char *);
-extern int _SLang_push_datatype (unsigned char);
-
-struct _SLang_Ref_Type
-{
- int is_global;
- union
- {
- SLang_Name_Type *nt;
- SLang_Object_Type *local_obj;
- }
- v;
-};
-
-extern int _SLang_dereference_ref (SLang_Ref_Type *);
-extern int _SLang_deref_assign (SLang_Ref_Type *);
-extern int _SLang_push_ref (int, VOID_STAR);
-
-extern int _SL_increment_frame_pointer (void);
-extern int _SL_decrement_frame_pointer (void);
-
-extern int SLang_pop(SLang_Object_Type *);
-extern void SLang_free_object (SLang_Object_Type *);
-extern int _SLanytype_typecast (unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR);
-extern void _SLstring_intrinsic (void);
-
-
-/* These functions are used to create slstrings of a fixed length. Be
- * very careful how they are used. In particular, if len bytes are allocated,
- * then the string must be len characters long, no more and no less.
- */
-extern char *_SLallocate_slstring (unsigned int);
-extern char *_SLcreate_via_alloced_slstring (char *, unsigned int);
-extern void _SLunallocate_slstring (char *, unsigned int);
-extern int _SLpush_alloced_slstring (char *, unsigned int);
-
-typedef struct
-{
- char **buf;
- unsigned int max_num;
- unsigned int num;
- unsigned int delta_num;
-}
-_SLString_List_Type;
-extern int _SLstring_list_append (_SLString_List_Type *, char *);
-extern int _SLstring_list_init (_SLString_List_Type *, unsigned int, unsigned int);
-extern void _SLstring_list_delete (_SLString_List_Type *);
-extern int _SLstring_list_push (_SLString_List_Type *);
-
-/* This function assumes that s is an slstring. */
-extern char *_SLstring_dup_slstring (char *);
-extern int _SLang_dup_and_push_slstring (char *);
-
-
-extern int _SLang_init_import (void);
-
-/* This function checks to see if the referenced object is initialized */
-extern int _SLang_is_ref_initialized (SLang_Ref_Type *);
-extern int _SLcheck_identifier_syntax (char *);
-extern int _SLang_uninitialize_ref (SLang_Ref_Type *);
-
-extern int _SLpush_slang_obj (SLang_Object_Type *);
-
-extern char *_SLexpand_escaped_char(char *, char *);
-extern void _SLexpand_escaped_string (char *, char *, char *);
-
-/* returns a pointer to an SLstring string-- use SLang_free_slstring */
-extern char *_SLstringize_object (SLang_Object_Type *);
-extern int _SLdump_objects (char *, SLang_Object_Type *, unsigned int, int);
-
-extern SLang_Object_Type *_SLRun_Stack;
-extern SLang_Object_Type *_SLStack_Pointer;
-
-struct _SLang_NameSpace_Type
-{
- struct _SLang_NameSpace_Type *next;
- char *name; /* this is the load_type name */
- char *namespace_name; /* this name is assigned by implements */
- unsigned int table_size;
- SLang_Name_Type **table;
-};
-extern SLang_NameSpace_Type *_SLns_allocate_namespace (char *, unsigned int);
-extern SLang_NameSpace_Type *_SLns_find_namespace (char *);
-extern int _SLns_set_namespace_name (SLang_NameSpace_Type *, char *);
-extern SLang_Array_Type *_SLnspace_apropos (SLang_NameSpace_Type *, char *, unsigned int);
-extern void _SLang_use_namespace_intrinsic (char *name);
-extern char *_SLang_cur_namespace_intrinsic (void);
-extern SLang_Array_Type *_SLang_apropos (char *, char *, unsigned int);
-extern void _SLang_implements_intrinsic (char *);
-
-extern int _SLang_Trace;
-extern int _SLstack_depth(void);
-extern char *_SLang_Current_Function_Name;
-
-extern int _SLang_trace_fun(char *);
-extern int _SLang_Compile_Line_Num_Info;
-
-extern char *_SLstring_dup_hashed_string (char *, unsigned long);
-extern unsigned long _SLcompute_string_hash (char *);
-extern char *_SLstring_make_hashed_string (char *, unsigned int, unsigned long *);
-extern void _SLfree_hashed_string (char *, unsigned int, unsigned long);
-unsigned long _SLstring_hash (unsigned char *, unsigned char *);
-extern int _SLinit_slcomplex (void);
-
-extern int _SLang_init_slstrops (void);
-extern int _SLstrops_do_sprintf_n (int);
-extern int _SLang_sscanf (void);
-extern double _SLang_atof (char *);
-extern int _SLang_init_bstring (void);
-extern int _SLang_init_sltime (void);
-extern void _SLpack (void);
-extern void _SLunpack (char *, SLang_BString_Type *);
-extern void _SLpack_pad_format (char *);
-extern unsigned int _SLpack_compute_size (char *);
-extern int _SLusleep (unsigned long);
-
-/* frees upon error. NULL __NOT__ ok. */
-extern int _SLang_push_slstring (char *);
-
-extern unsigned char _SLarith_promote_type (unsigned char);
-extern int _SLarith_get_precedence (unsigned char);
-extern int _SLarith_typecast (unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR);
-
-extern int SLang_push(SLang_Object_Type *);
-extern int SLadd_global_variable (char *);
-extern void _SLang_clear_error (void);
-
-extern int _SLdo_pop (void);
-extern unsigned int _SLsys_getkey (void);
-extern int _SLsys_input_pending (int);
-#ifdef IBMPC_SYSTEM
-extern unsigned int _SLpc_convert_scancode (unsigned int, unsigned int, int);
-#define _SLTT_KEY_SHIFT 1
-#define _SLTT_KEY_CTRL 2
-#define _SLTT_KEY_ALT 4
-#endif
-
-typedef struct _SLterminfo_Type SLterminfo_Type;
-extern SLterminfo_Type *_SLtt_tigetent (char *);
-extern char *_SLtt_tigetstr (SLterminfo_Type *, char *);
-extern int _SLtt_tigetnum (SLterminfo_Type *, char *);
-extern int _SLtt_tigetflag (SLterminfo_Type *, char *);
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-extern int _SLtt_get_bce_color_offset (void);
-#endif
-extern void (*_SLtt_color_changed_hook)(void);
-
-extern unsigned char SLang_Input_Buffer [SL_MAX_INPUT_BUFFER_LEN];
-
-extern int _SLregister_types (void);
-extern SLang_Class_Type *_SLclass_get_class (unsigned char);
-extern VOID_STAR _SLclass_get_ptr_to_value (SLang_Class_Type *, SLang_Object_Type *);
-extern void _SLclass_type_mismatch_error (unsigned char, unsigned char);
-extern int _SLclass_init (void);
-extern int _SLclass_copy_class (unsigned char, unsigned char);
-
-extern unsigned char _SLclass_Class_Type [256];
-
-extern int (*_SLclass_get_typecast (unsigned char, unsigned char, int))
-(unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR);
-
-extern int (*_SLclass_get_binary_fun (int, SLang_Class_Type *, SLang_Class_Type *, SLang_Class_Type **, int))
-(int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR);
-
-extern int (*_SLclass_get_unary_fun (int, SLang_Class_Type *, SLang_Class_Type **, int))
-(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-
-extern int _SLarith_register_types (void);
-extern unsigned char _SLarith_Arith_Types [];
-extern unsigned char _SLarith_Is_Arith_Type [256];
-extern int _SLarith_bin_op (SLang_Object_Type *, SLang_Object_Type *, int);
-
-extern int _SLarray_add_bin_op (unsigned char);
-
-extern int _SLang_call_funptr (SLang_Name_Type *);
-extern void _SLset_double_format (char *);
-extern SLang_Name_Type *_SLlocate_global_name (char *);
-extern SLang_Name_Type *_SLlocate_name (char *);
-
-extern char *_SLdefines[];
-
-#define SL_ERRNO_NOT_IMPLEMENTED 0x7FFF
-extern int _SLerrno_errno;
-extern int _SLerrno_init (void);
-
-extern int _SLstdio_fdopen (char *, int, char *);
-
-extern void _SLstruct_pop_args (int *);
-extern void _SLstruct_push_args (SLang_Array_Type *);
-
-extern int _SLarray_aput (void);
-extern int _SLarray_aget (void);
-extern int _SLarray_inline_implicit_array (void);
-extern int _SLarray_inline_array (void);
-extern int _SLarray_wildcard_array (void);
-
-extern int
-_SLarray_typecast (unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, int);
-
-extern int _SLarray_aput_transfer_elem (SLang_Array_Type *, int *,
- VOID_STAR, unsigned int, int);
-extern int _SLarray_aget_transfer_elem (SLang_Array_Type *, int *,
- VOID_STAR, unsigned int, int);
-extern void _SLarray_free_array_elements (SLang_Class_Type *, VOID_STAR, unsigned int);
-
-extern SLang_Foreach_Context_Type *
-_SLarray_cl_foreach_open (unsigned char, unsigned int);
-extern void _SLarray_cl_foreach_close (unsigned char, SLang_Foreach_Context_Type *);
-extern int _SLarray_cl_foreach (unsigned char, SLang_Foreach_Context_Type *);
-
-extern int _SLarray_matrix_multiply (void);
-extern void (*_SLang_Matrix_Multiply)(void);
-
-extern int _SLarray_init_slarray (void);
-extern SLang_Array_Type *
-SLang_create_array1 (unsigned char, int, VOID_STAR, int *, unsigned int, int);
-
-extern int _SLcompile_push_context (SLang_Load_Type *);
-extern int _SLcompile_pop_context (void);
-extern int _SLang_Auto_Declare_Globals;
-
-typedef struct
-{
- union
- {
- long long_val;
- char *s_val; /* Used for IDENT_TOKEN, FLOAT, etc... */
- SLang_BString_Type *b_val;
- } v;
- int free_sval_flag;
- unsigned int num_refs;
- unsigned long hash;
-#if _SLANG_HAS_DEBUG_CODE
- int line_number;
-#endif
- unsigned char type;
-}
-_SLang_Token_Type;
-
-extern void _SLcompile (_SLang_Token_Type *);
-extern void (*_SLcompile_ptr)(_SLang_Token_Type *);
-
-/* *** TOKENS *** */
-
-/* Note that that tokens corresponding to ^J, ^M, and ^Z should not be used.
- * This is because a file that contains any of these characters will
- * have an OS dependent interpretation, e.g., ^Z is EOF on MSDOS.
- */
-
-/* Special tokens */
-#define EOF_TOKEN 0x01
-#define RPN_TOKEN 0x02
-#define NL_TOKEN 0x03
-#define NOP_TOKEN 0x05
-#define FARG_TOKEN 0x06
-#define TMP_TOKEN 0x07
-
-#define RESERVED1_TOKEN 0x0A /* \n */
-#define RESERVED2_TOKEN 0x0D /* \r */
-
-/* Literal tokens */
-#define CHAR_TOKEN 0x10
-#define UCHAR_TOKEN 0x11
-#define SHORT_TOKEN 0x12
-#define USHORT_TOKEN 0x13
-#define INT_TOKEN 0x14
-#define UINT_TOKEN 0x15
-#define LONG_TOKEN 0x16
-#define ULONG_TOKEN 0x17
-#define IS_INTEGER_TOKEN(x) ((x >= CHAR_TOKEN) && (x <= ULONG_TOKEN))
-#define FLOAT_TOKEN 0x18
-#define DOUBLE_TOKEN 0x19
-#define RESERVED3_TOKEN 0x1A /* ^Z */
-#define COMPLEX_TOKEN 0x1B
-#define STRING_TOKEN 0x1C
-#define BSTRING_TOKEN 0x1D
-#define _BSTRING_TOKEN 0x1E /* byte-compiled BSTRING */
-#define ESC_STRING_TOKEN 0x1F
-
-/* Tokens that can be LVALUES */
-#define IDENT_TOKEN 0x20
-#define ARRAY_TOKEN 0x21
-#define DOT_TOKEN 0x22
-#define IS_LVALUE_TOKEN (((t) <= DOT_TOKEN) && ((t) >= IDENT_TOKEN))
-
-/* do not use these values */
-#define RESERVED4_TOKEN 0x23 /* # */
-#define RESERVED5_TOKEN 0x25 /* % */
-
-/* Flags for struct fields */
-#define STATIC_TOKEN 0x26
-#define READONLY_TOKEN 0x27
-#define PRIVATE_TOKEN 0x28
-#define PUBLIC_TOKEN 0x29
-
-/* Punctuation tokens */
-#define OBRACKET_TOKEN 0x2a
-#define CBRACKET_TOKEN 0x2b
-#define OPAREN_TOKEN 0x2c
-#define CPAREN_TOKEN 0x2d
-#define OBRACE_TOKEN 0x2e
-#define CBRACE_TOKEN 0x2f
-
-#define COMMA_TOKEN 0x31
-#define SEMICOLON_TOKEN 0x32
-#define COLON_TOKEN 0x33
-#define NAMESPACE_TOKEN 0x34
-
-/* Operators */
-#define POW_TOKEN 0x38
-
-/* The order here must match the order in the Binop_Level table in slparse.c */
-#define FIRST_BINARY_OP 0x39
-#define ADD_TOKEN 0x39
-#define SUB_TOKEN 0x3a
-#define TIMES_TOKEN 0x3b
-#define DIV_TOKEN 0x3c
-#define LT_TOKEN 0x3d
-#define LE_TOKEN 0x3e
-#define GT_TOKEN 0x3f
-#define GE_TOKEN 0x40
-#define EQ_TOKEN 0x41
-#define NE_TOKEN 0x42
-#define AND_TOKEN 0x43
-#define OR_TOKEN 0x44
-#define MOD_TOKEN 0x45
-#define BAND_TOKEN 0x46
-#define SHL_TOKEN 0x47
-#define SHR_TOKEN 0x48
-#define BXOR_TOKEN 0x49
-#define BOR_TOKEN 0x4a
-#define POUND_TOKEN 0x4b /* matrix multiplication */
-
-#define LAST_BINARY_OP 0x4b
-#define IS_BINARY_OP(t) ((t >= FIRST_BINARY_OP) && (t <= LAST_BINARY_OP))
-
-/* unary tokens -- but not all of them (see grammar) */
-#define DEREF_TOKEN 0x4d
-#define NOT_TOKEN 0x4e
-#define BNOT_TOKEN 0x4f
-
-#define IS_INTERNAL_FUNC(t) ((t >= 0x50) && (t <= 0x56))
-#define POP_TOKEN 0x50
-#define CHS_TOKEN 0x51
-#define SIGN_TOKEN 0x52
-#define ABS_TOKEN 0x53
-#define SQR_TOKEN 0x54
-#define MUL2_TOKEN 0x55
-#define EXCH_TOKEN 0x56
-
-/* Assignment tokens. Note: these must appear with sequential values.
- * The order here must match the specific lvalue assignments below.
- * These tokens are used by rpn routines in slang.c. slparse.c maps them
- * onto the specific lvalue tokens while parsing infix.
- * Also the assignment _SLANG_BCST_ assumes this order
- */
-#define ASSIGN_TOKEN 0x57
-#define PLUSEQS_TOKEN 0x58
-#define MINUSEQS_TOKEN 0x59
-#define TIMESEQS_TOKEN 0x5A
-#define DIVEQS_TOKEN 0x5B
-#define BOREQS_TOKEN 0x5C
-#define BANDEQS_TOKEN 0x5D
-#define PLUSPLUS_TOKEN 0x5E
-#define POST_PLUSPLUS_TOKEN 0x5F
-#define MINUSMINUS_TOKEN 0x60
-#define POST_MINUSMINUS_TOKEN 0x61
-
-/* Directives */
-#define FIRST_DIRECTIVE_TOKEN 0x62
-#define IFNOT_TOKEN 0x62
-#define IF_TOKEN 0x63
-#define ELSE_TOKEN 0x64
-#define FOREVER_TOKEN 0x65
-#define WHILE_TOKEN 0x66
-#define FOR_TOKEN 0x67
-#define _FOR_TOKEN 0x68
-#define LOOP_TOKEN 0x69
-#define SWITCH_TOKEN 0x6A
-#define DOWHILE_TOKEN 0x6B
-#define ANDELSE_TOKEN 0x6C
-#define ORELSE_TOKEN 0x6D
-#define ERRBLK_TOKEN 0x6E
-#define EXITBLK_TOKEN 0x6F
-/* These must be sequential */
-#define USRBLK0_TOKEN 0x70
-#define USRBLK1_TOKEN 0x71
-#define USRBLK2_TOKEN 0x72
-#define USRBLK3_TOKEN 0x73
-#define USRBLK4_TOKEN 0x74
-
-#define CONT_TOKEN 0x75
-#define BREAK_TOKEN 0x76
-#define RETURN_TOKEN 0x77
-
-#define CASE_TOKEN 0x78
-#define DEFINE_TOKEN 0x79
-#define DO_TOKEN 0x7a
-#define VARIABLE_TOKEN 0x7b
-#define GVARIABLE_TOKEN 0x7c
-#define _REF_TOKEN 0x7d
-#define PUSH_TOKEN 0x7e
-#define STRUCT_TOKEN 0x7f
-#define TYPEDEF_TOKEN 0x80
-#define NOTELSE_TOKEN 0x81
-#define DEFINE_STATIC_TOKEN 0x82
-#define FOREACH_TOKEN 0x83
-#define USING_TOKEN 0x84
-#define DEFINE_PRIVATE_TOKEN 0x85
-#define DEFINE_PUBLIC_TOKEN 0x86
-
-/* Note: the order here must match the order of the generic assignment tokens.
- * Also, the first token of each group must be the ?_ASSIGN_TOKEN.
- * slparse.c exploits this order, as well as slang.h.
- */
-#define FIRST_ASSIGN_TOKEN 0x90
-#define _STRUCT_ASSIGN_TOKEN 0x90
-#define _STRUCT_PLUSEQS_TOKEN 0x91
-#define _STRUCT_MINUSEQS_TOKEN 0x92
-#define _STRUCT_TIMESEQS_TOKEN 0x93
-#define _STRUCT_DIVEQS_TOKEN 0x94
-#define _STRUCT_BOREQS_TOKEN 0x95
-#define _STRUCT_BANDEQS_TOKEN 0x96
-#define _STRUCT_PLUSPLUS_TOKEN 0x97
-#define _STRUCT_POST_PLUSPLUS_TOKEN 0x98
-#define _STRUCT_MINUSMINUS_TOKEN 0x99
-#define _STRUCT_POST_MINUSMINUS_TOKEN 0x9A
-
-#define _ARRAY_ASSIGN_TOKEN 0xA0
-#define _ARRAY_PLUSEQS_TOKEN 0xA1
-#define _ARRAY_MINUSEQS_TOKEN 0xA2
-#define _ARRAY_TIMESEQS_TOKEN 0xA3
-#define _ARRAY_DIVEQS_TOKEN 0xA4
-#define _ARRAY_BOREQS_TOKEN 0xA5
-#define _ARRAY_BANDEQS_TOKEN 0xA6
-#define _ARRAY_PLUSPLUS_TOKEN 0xA7
-#define _ARRAY_POST_PLUSPLUS_TOKEN 0xA8
-#define _ARRAY_MINUSMINUS_TOKEN 0xA9
-#define _ARRAY_POST_MINUSMINUS_TOKEN 0xAA
-
-#define _SCALAR_ASSIGN_TOKEN 0xB0
-#define _SCALAR_PLUSEQS_TOKEN 0xB1
-#define _SCALAR_MINUSEQS_TOKEN 0xB2
-#define _SCALAR_TIMESEQS_TOKEN 0xB3
-#define _SCALAR_DIVEQS_TOKEN 0xB4
-#define _SCALAR_BOREQS_TOKEN 0xB5
-#define _SCALAR_BANDEQS_TOKEN 0xB6
-#define _SCALAR_PLUSPLUS_TOKEN 0xB7
-#define _SCALAR_POST_PLUSPLUS_TOKEN 0xB8
-#define _SCALAR_MINUSMINUS_TOKEN 0xB9
-#define _SCALAR_POST_MINUSMINUS_TOKEN 0xBA
-
-#define _DEREF_ASSIGN_TOKEN 0xC0
-#define _DEREF_PLUSEQS_TOKEN 0xC1
-#define _DEREF_MINUSEQS_TOKEN 0xC2
-#define _DEREF_TIMESEQS_TOKEN 0xC3
-#define _DEREF_DIVEQS_TOKEN 0xC4
-#define _DEREF_BOREQS_TOKEN 0xC5
-#define _DEREF_BANDEQS_TOKEN 0xC6
-#define _DEREF_PLUSPLUS_TOKEN 0xC7
-#define _DEREF_POST_PLUSPLUS_TOKEN 0xC8
-#define _DEREF_MINUSMINUS_TOKEN 0xC9
-#define _DEREF_POST_MINUSMINUS_TOKEN 0xCA
-
-#define LAST_ASSIGN_TOKEN 0xCA
-#define IS_ASSIGN_TOKEN(t) (((t)>=FIRST_ASSIGN_TOKEN)&&((t)<=LAST_ASSIGN_TOKEN))
-
-#define _INLINE_ARRAY_TOKEN 0xE0
-#define _INLINE_IMPLICIT_ARRAY_TOKEN 0xE1
-#define _NULL_TOKEN 0xE2
-#define _INLINE_WILDCARD_ARRAY_TOKEN 0xE3
-
-#define LINE_NUM_TOKEN 0xFC
-#define ARG_TOKEN 0xFD
-#define EARG_TOKEN 0xFE
-#define NO_OP_LITERAL 0xFF
-
-typedef struct
-{
- /* sltoken.c */
- /* SLang_eval_object */
- SLang_Load_Type *llt;
- SLPreprocess_Type *this_slpp;
- /* prep_get_char() */
- char *input_line;
- char cchar;
- /* get_token() */
- int want_nl_token;
-
- /* slparse.c */
- _SLang_Token_Type ctok;
- int block_depth;
- int assignment_expression;
-
- /* slang.c : SLcompile() */
- _SLang_Token_Type save_token;
- _SLang_Token_Type next_token;
- void (*slcompile_ptr)(_SLang_Token_Type *);
-}
-_SLEval_Context;
-
-extern int _SLget_token (_SLang_Token_Type *);
-extern void _SLparse_error (char *, _SLang_Token_Type *, int);
-extern void _SLparse_start (SLang_Load_Type *);
-extern int _SLget_rpn_token (_SLang_Token_Type *);
-extern void _SLcompile_byte_compiled (void);
-
-extern int (*_SLprep_eval_hook) (char *);
-
-#ifdef HAVE_VSNPRINTF
-#define _SLvsnprintf vsnprintf
-#else
-extern int _SLvsnprintf (char *, unsigned int, char *, va_list);
-#endif
-
-#ifdef HAVE_SNPRINTF
-# define _SLsnprintf snprintf
-#else
-extern int _SLsnprintf (char *, unsigned int, char *, ...);
-#endif
-
-#undef _INLINE_
-#if defined(__GNUC__) && _SLANG_USE_INLINE_CODE
-# define _INLINE_ __inline__
-#else
-# define _INLINE_
-#endif
-
-
-#endif /* _PRIVATE_SLANG_H_ */
diff --git a/mdk-stage1/slang/config.h b/mdk-stage1/slang/config.h
deleted file mode 100644
index a5ab3273c..000000000
--- a/mdk-stage1/slang/config.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/* src/sysconf.h. Generated automatically by configure. */
-/* -*- c -*- */
-/* Note: this is for unix only. */
-
-#ifndef SL_CONFIG_H
-#define SL_CONFIG_H
-
-/* define if you have stdlib.h */
-#define HAVE_STDLIB_H 1
-
-/* define if you have unistd.h */
-#define HAVE_UNISTD_H 1
-
-/* define if you have termios.h */
-#define HAVE_TERMIOS_H 1
-
-/* define if you have memory.h */
-#define HAVE_MEMORY_H 1
-
-/* define if you have malloc.h */
-#define HAVE_MALLOC_H 1
-
-/* define if you have memset */
-#define HAVE_MEMSET 1
-
-/* define if you have memcpy */
-#define HAVE_MEMCPY 1
-
-//#define HAVE_SETLOCALE 1
-//#define HAVE_LOCALE_H 1
-
-#define HAVE_VFSCANF 1
-
-/* define if you have fcntl.h */
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the vsnprintf, snprintf functions and they return
- * EOF upon failure.
- */
-#define HAVE_VSNPRINTF 1
-#define HAVE_SNPRINTF 1
-
-/* define if you have sys/fcntl.h */
-#define HAVE_SYS_FCNTL_H 1
-
-#define HAVE_SYS_TYPES_H 1
-#define HAVE_SYS_WAIT_H 1
-#define HAVE_SYS_TIMES_H 1
-
-/* Set these to the appropriate values */
-#define SIZEOF_SHORT 2
-#define SIZEOF_INT 4
-#define SIZEOF_LONG 4
-#define SIZEOF_FLOAT 4
-#define SIZEOF_DOUBLE 8
-
-/* define if you have these. */
-#define HAVE_ATEXIT 1
-#define HAVE_ON_EXIT 1
-#define HAVE_PUTENV 1
-#define HAVE_GETCWD 1
-#define HAVE_TCGETATTR 1
-#define HAVE_TCSETATTR 1
-#define HAVE_CFGETOSPEED 1
-#define HAVE_LSTAT 1
-#define HAVE_KILL 1
-#define HAVE_CHOWN 1
-#define HAVE_VSNPRINTF 1
-#define HAVE_POPEN 1
-#define HAVE_UMASK 1
-#define HAVE_READLINK 1
-#define HAVE_TIMES 1
-#define HAVE_GMTIME 1
-#define HAVE_MKFIFO 1
-
-#define HAVE_GETPPID 1
-#define HAVE_GETGID 1
-#define HAVE_GETEGID 1
-#define HAVE_GETEUID 1
-/* #undef HAVE_GETUID */
-
-#define HAVE_SETGID 1
-#define HAVE_SETPGID 1
-#define HAVE_SETUID 1
-
-#define HAVE_ACOSH 1
-#define HAVE_ASINH 1
-#define HAVE_ATANH 1
-
-#define HAVE_DIRENT_H 1
-/* #undef HAVE_SYS_NDIR_H */
-/* #undef HAVE_SYS_DIR_H */
-/* #undef HAVE_NDIR_H */
-
-#define HAVE_DLFCN_H 1
-
-#define HAVE_SYS_UTSNAME_H 1
-#define HAVE_UNAME 1
-
-/* These two are needed on DOS-like systems. Unix does not require them.
- * They are included here for consistency.
- *
-#define HAVE_IO_H
-#define HAVE_PROCESS_H
- */
-
-/* #undef USE_TERMCAP */
-
-/* #undef mode_t */
-/* #undef uid_t */
-/* #undef pid_t */
-/* #undef gid_t */
-
-/* Do we have posix signals? */
-#define HAVE_SIGACTION 1
-#define HAVE_SIGPROCMASK 1
-#define HAVE_SIGEMPTYSET 1
-#define HAVE_SIGADDSET 1
-
-#if defined(HAVE_SIGADDSET) && defined(HAVE_SIGEMPTYSET)
-# if defined(HAVE_SIGACTION) && defined(HAVE_SIGPROCMASK)
-# define SLANG_POSIX_SIGNALS
-# endif
-#endif
-
-/* Define if you need to in order for stat and other things to work. */
-/* #undef _POSIX_SOURCE */
-
-#ifdef _AIX
-# ifndef _POSIX_SOURCE
-# define _POSIX_SOURCE 1
-# endif
-# ifndef _ALL_SOURCE
-# define _ALL_SOURCE
-# endif
-/* This may generate warnings but the fact is that without it, xlc will
- * INCORRECTLY inline many str* functions. */
-/* # undef __STR__ */
-#endif
-
-/* define USE_TERMCAP if you want to use it instead of terminfo. */
-#if defined(sequent) || defined(NeXT)
-# ifndef USE_TERMCAP
-# define USE_TERMCAP
-# endif
-#endif
-
-#if defined(ultrix) && !defined(__GNUC__)
-# ifndef NO_PROTOTYPES
-# define NO_PROTOTYPES
-# endif
-#endif
-
-#ifndef unix
-# define unix 1
-#endif
-
-#ifndef __unix__
-# define __unix__ 1
-#endif
-
-#define _SLANG_SOURCE_ 1
-#endif /* SL_CONFIG_H */
diff --git a/mdk-stage1/slang/jdmacros.h b/mdk-stage1/slang/jdmacros.h
deleted file mode 100644
index 70d491b78..000000000
--- a/mdk-stage1/slang/jdmacros.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _JD_MACROS_H_
-#define _JD_MACROS_H_
-
-#ifndef SLMEMSET
-# ifdef HAVE_MEMSET
-# define SLMEMSET memset
-# else
-# define SLMEMSET SLmemset
-# endif
-#endif
-
-#ifndef SLMEMCHR
-# ifdef HAVE_MEMCHR
-# define SLMEMCHR memchr
-# else
-# define SLMEMCHR SLmemchr
-# endif
-#endif
-
-#ifndef SLMEMCPY
-# ifdef HAVE_MEMCPY
-# define SLMEMCPY memcpy
-# else
-# define SLMEMCPY SLmemcpy
-# endif
-#endif
-
-/* Note: HAVE_MEMCMP requires an unsigned memory comparison!!! */
-#ifndef SLMEMCMP
-# ifdef HAVE_MEMCMP
-# define SLMEMCMP memcmp
-# else
-# define SLMEMCMP SLmemcmp
-# endif
-#endif
-
-#ifndef SLFREE
-# define SLFREE free
-#endif
-
-#ifndef SLMALLOC
-# define SLMALLOC malloc
-#endif
-
-#ifndef SLCALLOC
-# define SLCALLOC calloc
-#endif
-
-#ifndef SLREALLOC
-# define SLREALLOC realloc
-#endif
-
-#endif /* _JD_MACROS_H_ */
diff --git a/mdk-stage1/slang/keywhash.c b/mdk-stage1/slang/keywhash.c
deleted file mode 100644
index 17d94d5a3..000000000
--- a/mdk-stage1/slang/keywhash.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/* Perfect hash generated by command line:
- * ./a.out 1
- */
-#define MIN_HASH_VALUE 2
-#define MAX_HASH_VALUE 118
-#define MIN_KEYWORD_LEN 2
-#define MAX_KEYWORD_LEN 11
-
-static unsigned char Keyword_Hash_Table [256] =
-{
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 1, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 9, 7, 1, 8, 2, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 119, 0, 0, 119, 0, 119, 119, 119, 7, 119, 0, 0, 119, 119, 0,
- 119, 119, 0, 0, 0, 0, 119, 119, 0, 119, 119, 119, 119, 119, 119, 2,
- 119, 41, 1, 1, 9, 0, 55, 8, 0, 0, 119, 0, 27, 0, 0, 0,
- 7, 2, 0, 21, 0, 0, 0, 3, 2, 0, 119, 119, 119, 119, 119, 119,
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119,
- 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119
-};
-
-static unsigned char keyword_hash (char *s, unsigned int len)
-{
- unsigned int sum;
-
- sum = len;
- while (len)
- {
- len--;
- sum += (unsigned int) Keyword_Hash_Table [(unsigned char)s[len]];
- }
- return sum;
-}
-
-typedef struct
-{
- char *name;
- unsigned int type;
-}
-Keyword_Table_Type;
-
-static Keyword_Table_Type Keyword_Table [/* 117 */] =
-{
- {"or", OR_TOKEN},
- {"not", NOT_TOKEN},
- {NULL,0},
- {"xor", BXOR_TOKEN},
- {"return", RETURN_TOKEN},
- {"exch", EXCH_TOKEN},
- {NULL,0},
- {"continue", CONT_TOKEN},
- {NULL,0},
- {"do", DO_TOKEN},
- {"mod", MOD_TOKEN},
- {"ERROR_BLOCK", ERRBLK_TOKEN},
- {"USER_BLOCK2", USRBLK2_TOKEN},
- {"USER_BLOCK4", USRBLK4_TOKEN},
- {"__tmp", TMP_TOKEN},
- {"pop", POP_TOKEN},
- {NULL,0},
- {"EXIT_BLOCK", EXITBLK_TOKEN},
- {"USER_BLOCK1", USRBLK1_TOKEN},
- {"USER_BLOCK3", USRBLK3_TOKEN},
- {"USER_BLOCK0", USRBLK0_TOKEN},
- {NULL,0},
- {"shr", SHR_TOKEN},
- {"chs", CHS_TOKEN},
- {"sqr", SQR_TOKEN},
- {NULL,0},
- {"struct", STRUCT_TOKEN},
- {NULL,0},
- {NULL,0},
- {"switch", SWITCH_TOKEN},
- {"mul2", MUL2_TOKEN},
- {"sign", SIGN_TOKEN},
- {"using", USING_TOKEN},
- {"while", WHILE_TOKEN},
- {NULL,0},
- {NULL,0},
- {"loop", LOOP_TOKEN},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {"public", PUBLIC_TOKEN},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {"break", BREAK_TOKEN},
- {NULL,0},
- {"do_while", DOWHILE_TOKEN},
- {NULL,0},
- {"shl", SHL_TOKEN},
- {"else", ELSE_TOKEN},
- {"and", AND_TOKEN},
- {"orelse", ORELSE_TOKEN},
- {"private", PRIVATE_TOKEN},
- {NULL,0},
- {"if", IF_TOKEN},
- {"for", FOR_TOKEN},
- {"!if", IFNOT_TOKEN},
- {NULL,0},
- {"_for", _FOR_TOKEN},
- {"forever", FOREVER_TOKEN},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {"abs", ABS_TOKEN},
- {"case", CASE_TOKEN},
- {NULL,0},
- {"static", STATIC_TOKEN},
- {"define", DEFINE_TOKEN},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {"typedef", TYPEDEF_TOKEN},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {"foreach", FOREACH_TOKEN},
- {"andelse", ANDELSE_TOKEN},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {NULL,0},
- {"variable", VARIABLE_TOKEN},
-};
-
-static Keyword_Table_Type *is_keyword (char *str, unsigned int len)
-{
- unsigned int hash;
- char *name;
- Keyword_Table_Type *kw;
-
- if ((len < MIN_KEYWORD_LEN)
- || (len > MAX_KEYWORD_LEN))
- return NULL;
-
- hash = keyword_hash (str, len);
- if ((hash > MAX_HASH_VALUE) || (hash < MIN_HASH_VALUE))
- return NULL;
-
- kw = &Keyword_Table[hash - MIN_HASH_VALUE];
- if ((NULL != (name = kw->name))
- && (*str == *name)
- && (0 == strcmp (str, name)))
- return kw;
- return NULL;
-}
diff --git a/mdk-stage1/slang/sl-feat.h b/mdk-stage1/slang/sl-feat.h
deleted file mode 100644
index 511d72451..000000000
--- a/mdk-stage1/slang/sl-feat.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Setting this to 1 enables automatic support for associative arrays.
- * If this is set to 0, an application must explicitly enable associative
- * array support via SLang_init_slassoc.
- */
-#define SLANG_HAS_ASSOC_ARRAYS 1
-
-#define SLANG_HAS_COMPLEX 1
-#define SLANG_HAS_FLOAT 1
-
-/* This is the old space-speed trade off. To reduce memory usage and code
- * size, set this to zero.
- */
-#define _SLANG_OPTIMIZE_FOR_SPEED 2
-
-#define _SLANG_USE_INLINE_CODE 1
-
-/* This is experimental. It adds extra information for tracking down
- * errors.
- */
-#define _SLANG_HAS_DEBUG_CODE 1
-
-/* Allow optimizations based upon the __tmp operator. */
-#define _SLANG_USE_TMP_OPTIMIZATION 1
-
-/* Setting this to one will map 8 bit vtxxx terminals to 7 bit. Terminals
- * such as the vt320 can be set up to output the two-character escape sequence
- * encoded as 'ESC [' as single character. Setting this variable to 1 will
- * insert code to map such characters to the 7 bit equivalent.
- * This affects just input characters in the range 128-160 on non PC
- * systems.
- */
-#if defined(VMS) || defined(AMIGA)
-# define _SLANG_MAP_VTXXX_8BIT 1
-#else
-# define _SLANG_MAP_VTXXX_8BIT 0
-#endif
-
-/* Add support for color terminals that cannot do background color erases
- * Such terminals are poorly designed and are slowly disappearing but they
- * are still quite common. For example, screen is one of them!
- *
- * This is experimental. In particular, it is not known to work if
- * KANJI suupport is enabled.
- */
-#if !defined(IBMPC_SYSTEM)
-# define SLTT_HAS_NON_BCE_SUPPORT 1
-#else
-# define SLTT_HAS_NON_BCE_SUPPORT 0
-#endif
-
-/* If you want slang to assume that an xterm always has the background color
- * erase feature, then set this to 1. Otherwise, it will check the terminfo
- * database. This may or may not be a good idea since most good color xterms
- * support bce but many terminfo systems do not support it.
- */
-#define SLTT_XTERM_ALWAYS_BCE 0
-
-/* Set this to 1 to enable Kanji support. See above comment. */
-#define SLANG_HAS_KANJI_SUPPORT 0
-
diff --git a/mdk-stage1/slang/slang.c b/mdk-stage1/slang/slang.c
deleted file mode 100644
index 6edc7df37..000000000
--- a/mdk-stage1/slang/slang.c
+++ /dev/null
@@ -1,5547 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* slang.c --- guts of S-Lang interpreter */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-#define USE_COMBINED_BYTECODES 0
-
-struct _SLBlock_Type;
-
-typedef struct
-{
- struct _SLBlock_Type *body;
- unsigned int num_refs;
-}
-_SLBlock_Header_Type;
-
-typedef struct
-{
- char *name;
- SLang_Name_Type *next;
- char name_type;
-
- union
- {
- _SLBlock_Header_Type *header; /* body of function */
- char *autoload_filename;
- }
- v;
-#if _SLANG_HAS_DEBUG_CODE
- char *file;
-#endif
-#define SLANG_MAX_LOCAL_VARIABLES 254
-#define AUTOLOAD_NUM_LOCALS (SLANG_MAX_LOCAL_VARIABLES + 1)
- unsigned char nlocals; /* number of local variables */
- unsigned char nargs; /* number of arguments */
-}
-_SLang_Function_Type;
-
-typedef struct
-{
- char *name;
- SLang_Name_Type *next;
- char name_type;
-
- SLang_Object_Type obj;
-}
-SLang_Global_Var_Type;
-
-typedef struct
-{
- char *name;
- SLang_Name_Type *next;
- char name_type;
-
- int local_var_number;
-}
-SLang_Local_Var_Type;
-
-typedef struct _SLBlock_Type
-{
- unsigned char bc_main_type;
- unsigned char bc_sub_type;
- union
- {
- struct _SLBlock_Type *blk;
- int i_blk;
-
- SLang_Name_Type *nt_blk;
- SLang_App_Unary_Type *nt_unary_blk;
- SLang_Intrin_Var_Type *nt_ivar_blk;
- SLang_Intrin_Fun_Type *nt_ifun_blk;
- SLang_Global_Var_Type *nt_gvar_blk;
- SLang_IConstant_Type *iconst_blk;
- SLang_DConstant_Type *dconst_blk;
- _SLang_Function_Type *nt_fun_blk;
-
- VOID_STAR ptr_blk;
- char *s_blk;
- SLang_BString_Type *bs_blk;
-
-#if SLANG_HAS_FLOAT
- double *double_blk; /*literal double is a pointer */
-#endif
- float float_blk;
- long l_blk;
- struct _SLang_Struct_Type *struct_blk;
- int (*call_function)(void);
- }
- b;
-}
-SLBlock_Type;
-
-/* Debugging and tracing variables */
-
-void (*SLang_Enter_Function)(char *) = NULL;
-void (*SLang_Exit_Function)(char *) = NULL;
-/* If non null, these call C functions before and after a slang function. */
-
-int _SLang_Trace = 0;
-/* If _SLang_Trace = -1, do not trace intrinsics */
-static int Trace_Mode = 0;
-
-static char *Trace_Function; /* function to be traced */
-int SLang_Traceback = 0;
-/* non zero means do traceback. If less than 0, do not show local variables */
-
-/* These variables handle _NARGS processing by the parser */
-int SLang_Num_Function_Args;
-static int *Num_Args_Stack;
-static unsigned int Recursion_Depth;
-static SLang_Object_Type *Frame_Pointer;
-static int Next_Function_Num_Args;
-static unsigned int Frame_Pointer_Depth;
-static unsigned int *Frame_Pointer_Stack;
-
-static int Lang_Break_Condition = 0;
-/* true if any one below is true. This keeps us from testing 3 variables.
- * I know this can be perfomed with a bitmapped variable, but...
- */
-static int Lang_Break = 0;
-static int Lang_Return = 0;
-/* static int Lang_Continue = 0; */
-
-SLang_Object_Type *_SLRun_Stack;
-SLang_Object_Type *_SLStack_Pointer;
-static SLang_Object_Type *_SLStack_Pointer_Max;
-
-/* Might want to increase this. */
-static SLang_Object_Type Local_Variable_Stack[SLANG_MAX_LOCAL_STACK];
-static SLang_Object_Type *Local_Variable_Frame = Local_Variable_Stack;
-
-static void free_function_header (_SLBlock_Header_Type *);
-
-void (*SLang_Dump_Routine)(char *);
-
-static void call_dump_routine (char *fmt, ...)
-{
- char buf[1024];
- va_list ap;
-
- va_start (ap, fmt);
- if (SLang_Dump_Routine != NULL)
- {
- (void) _SLvsnprintf (buf, sizeof (buf), fmt, ap);
- (*SLang_Dump_Routine) (buf);
- }
- else
- {
- vfprintf (stderr, fmt, ap);
- fflush (stderr);
- }
- va_end (ap);
-}
-
-static void do_traceback (char *, unsigned int, char *);
-static int init_interpreter (void);
-
-/*{{{ push/pop/etc stack manipulation functions */
-
-/* This routine is assumed to work even in the presence of a SLang_Error. */
-_INLINE_
-int SLang_pop (SLang_Object_Type *x)
-{
- register SLang_Object_Type *y;
-
- y = _SLStack_Pointer;
- if (y == _SLRun_Stack)
- {
- if (SLang_Error == 0) SLang_Error = SL_STACK_UNDERFLOW;
- x->data_type = 0;
- return -1;
- }
- y--;
- *x = *y;
-
- _SLStack_Pointer = y;
- return 0;
-}
-
-static int pop_ctrl_integer (int *i)
-{
- int type;
- SLang_Class_Type *cl;
-#if _SLANG_OPTIMIZE_FOR_SPEED
- register SLang_Object_Type *y;
-
- /* Most of the time, either an integer or a char will be on the stack.
- * Optimize these cases.
- */
- y = _SLStack_Pointer;
- if (y == _SLRun_Stack)
- {
- if (SLang_Error == 0) SLang_Error = SL_STACK_UNDERFLOW;
- return -1;
- }
- y--;
-
- type = y->data_type;
- if (type == SLANG_INT_TYPE)
- {
- _SLStack_Pointer = y;
- *i = y->v.int_val;
- return 0;
- }
- if (type == SLANG_CHAR_TYPE)
- {
- _SLStack_Pointer = y;
- *i = y->v.char_val;
- return 0;
- }
-#else
- if (-1 == (type = SLang_peek_at_stack ()))
- return -1;
-#endif
-
- cl = _SLclass_get_class ((unsigned char) type);
- if (cl->cl_to_bool == NULL)
- {
- SLang_verror (SL_TYPE_MISMATCH,
- "%s cannot be used in a boolean context",
- cl->cl_name);
- return -1;
- }
- return cl->cl_to_bool ((unsigned char) type, i);
-}
-
-_INLINE_
-int SLang_peek_at_stack (void)
-{
- if (_SLStack_Pointer == _SLRun_Stack)
- {
- if (SLang_Error == 0)
- SLang_Error = SL_STACK_UNDERFLOW;
- return -1;
- }
-
- return (_SLStack_Pointer - 1)->data_type;
-}
-
-int SLang_peek_at_stack1 (void)
-{
- int type;
-
- type = SLang_peek_at_stack ();
- if (type == SLANG_ARRAY_TYPE)
- type = (_SLStack_Pointer - 1)->v.array_val->data_type;
-
- return type;
-}
-
-_INLINE_
-void SLang_free_object (SLang_Object_Type *obj)
-{
- unsigned char data_type;
- SLang_Class_Type *cl;
-
- if (obj == NULL) return;
- data_type = obj->data_type;
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [data_type])
- return;
- if (data_type == SLANG_STRING_TYPE)
- {
- SLang_free_slstring (obj->v.s_val);
- return;
- }
-#endif
- cl = _SLclass_get_class (data_type);
-#if !_SLANG_OPTIMIZE_FOR_SPEED
- if (cl->cl_class_type != SLANG_CLASS_TYPE_SCALAR)
-#endif
- (*cl->cl_destroy) (data_type, (VOID_STAR) &obj->v);
-}
-
-_INLINE_
-int SLang_push (SLang_Object_Type *x)
-{
- register SLang_Object_Type *y;
- y = _SLStack_Pointer;
-
- /* if there is a SLang_Error, probably not much harm will be done
- if it is ignored here */
- /* if (SLang_Error) return; */
-
- /* flag it now */
- if (y >= _SLStack_Pointer_Max)
- {
- if (!SLang_Error) SLang_Error = SL_STACK_OVERFLOW;
- return -1;
- }
-
- *y = *x;
- _SLStack_Pointer = y + 1;
- return 0;
-}
-
-/* _INLINE_ */
-int SLclass_push_ptr_obj (unsigned char type, VOID_STAR pval)
-{
- register SLang_Object_Type *y;
- y = _SLStack_Pointer;
-
- if (y >= _SLStack_Pointer_Max)
- {
- if (!SLang_Error) SLang_Error = SL_STACK_OVERFLOW;
- return -1;
- }
-
- y->data_type = type;
- y->v.ptr_val = pval;
-
- _SLStack_Pointer = y + 1;
- return 0;
-}
-
-_INLINE_
-int SLclass_push_int_obj (unsigned char type, int x)
-{
- register SLang_Object_Type *y;
- y = _SLStack_Pointer;
-
- if (y >= _SLStack_Pointer_Max)
- {
- if (!SLang_Error) SLang_Error = SL_STACK_OVERFLOW;
- return -1;
- }
-
- y->data_type = type;
- y->v.int_val = x;
-
- _SLStack_Pointer = y + 1;
- return 0;
-}
-
-_INLINE_
-int _SLang_pop_object_of_type (unsigned char type, SLang_Object_Type *obj,
- int allow_arrays)
-{
- register SLang_Object_Type *y;
-
- y = _SLStack_Pointer;
- if (y == _SLRun_Stack)
- return SLang_pop (obj);
- y--;
- if (y->data_type != type)
- {
-#if _SLANG_OPTIMIZE_FOR_SPEED
- /* This is an implicit typecast. We do not want to typecast
- * floats to ints implicitly.
- */
- if (_SLarith_Is_Arith_Type [type]
- && _SLarith_Is_Arith_Type [y->data_type]
- && (_SLarith_Is_Arith_Type [type] >= _SLarith_Is_Arith_Type[y->data_type]))
- {
- /* This should not fail */
- (void) _SLarith_typecast (y->data_type, (VOID_STAR)&y->v, 1,
- type, (VOID_STAR)&obj->v);
- obj->data_type = type;
- _SLStack_Pointer = y;
- return 0;
- }
-#endif
-
- if ((allow_arrays == 0)
- || (y->data_type != SLANG_ARRAY_TYPE)
- || (y->v.array_val->data_type != type))
- if (-1 == SLclass_typecast (type, 1, 0))
- return -1;
- }
- *obj = *y;
- _SLStack_Pointer = y;
- return 0;
-}
-
-/* This function reverses the top n items on the stack and returns a
- * an offset from the start of the stack to the last item.
- */
-int SLreverse_stack (int n)
-{
- SLang_Object_Type *otop, *obot, tmp;
-
- otop = _SLStack_Pointer;
- if ((n > otop - _SLRun_Stack) || (n < 0))
- {
- SLang_Error = SL_STACK_UNDERFLOW;
- return -1;
- }
- obot = otop - n;
- otop--;
- while (otop > obot)
- {
- tmp = *obot;
- *obot = *otop;
- *otop = tmp;
- otop--;
- obot++;
- }
- return (int) ((_SLStack_Pointer - n) - _SLRun_Stack);
-}
-
-_INLINE_
-int SLroll_stack (int np)
-{
- int n, i;
- SLang_Object_Type *otop, *obot, tmp;
-
- if ((n = abs(np)) <= 1) return 0; /* identity */
-
- obot = otop = _SLStack_Pointer;
- i = n;
- while (i != 0)
- {
- if (obot <= _SLRun_Stack)
- {
- SLang_Error = SL_STACK_UNDERFLOW;
- return -1;
- }
- obot--;
- i--;
- }
- otop--;
-
- if (np > 0)
- {
- /* Put top on bottom and roll rest up. */
- tmp = *otop;
- while (otop > obot)
- {
- *otop = *(otop - 1);
- otop--;
- }
- *otop = tmp;
- }
- else
- {
- /* Put bottom on top and roll rest down. */
- tmp = *obot;
- while (obot < otop)
- {
- *obot = *(obot + 1);
- obot++;
- }
- *obot = tmp;
- }
- return 0;
-}
-
-int _SLstack_depth (void)
-{
- return (int) (_SLStack_Pointer - _SLRun_Stack);
-}
-
-int SLdup_n (int n)
-{
- SLang_Object_Type *bot, *top;
-
- if (n <= 0)
- return 0;
-
- top = _SLStack_Pointer;
- if (top < _SLRun_Stack + n)
- {
- if (SLang_Error == 0)
- SLang_Error = SL_STACK_UNDERFLOW;
- return -1;
- }
- if (top + n > _SLStack_Pointer_Max)
- {
- if (SLang_Error == 0)
- SLang_Error = SL_STACK_OVERFLOW;
- return -1;
- }
- bot = top - n;
-
- while (bot < top)
- {
- SLang_Class_Type *cl;
- unsigned char data_type = bot->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [data_type])
- {
- *_SLStack_Pointer++ = *bot++;
- continue;
- }
-#endif
- cl = _SLclass_get_class (data_type);
- if (-1 == (*cl->cl_push) (data_type, (VOID_STAR) &bot->v))
- return -1;
- bot++;
- }
- return 0;
-}
-
-/*}}}*/
-
-/*{{{ inner interpreter and support functions */
-
-_INLINE_
-int _SL_increment_frame_pointer (void)
-{
- if (Recursion_Depth >= SLANG_MAX_RECURSIVE_DEPTH)
- {
- SLang_verror (SL_STACK_OVERFLOW, "Num Args Stack Overflow");
- return -1;
- }
- Num_Args_Stack [Recursion_Depth] = SLang_Num_Function_Args;
-
- SLang_Num_Function_Args = Next_Function_Num_Args;
- Next_Function_Num_Args = 0;
- Recursion_Depth++;
- return 0;
-}
-
-_INLINE_
-int _SL_decrement_frame_pointer (void)
-{
- if (Recursion_Depth == 0)
- {
- SLang_verror (SL_STACK_UNDERFLOW, "Num Args Stack Underflow");
- return -1;
- }
-
- Recursion_Depth--;
- if (Recursion_Depth < SLANG_MAX_RECURSIVE_DEPTH)
- SLang_Num_Function_Args = Num_Args_Stack [Recursion_Depth];
-
- return 0;
-}
-
-_INLINE_
-int SLang_start_arg_list (void)
-{
- if (Frame_Pointer_Depth < SLANG_MAX_RECURSIVE_DEPTH)
- {
- Frame_Pointer_Stack [Frame_Pointer_Depth] = (unsigned int) (Frame_Pointer - _SLRun_Stack);
- Frame_Pointer = _SLStack_Pointer;
- Frame_Pointer_Depth++;
- Next_Function_Num_Args = 0;
- return 0;
- }
-
- SLang_verror (SL_STACK_OVERFLOW, "Frame Stack Overflow");
- return -1;
-}
-
-_INLINE_
-int SLang_end_arg_list (void)
-{
- if (Frame_Pointer_Depth == 0)
- {
- SLang_verror (SL_STACK_UNDERFLOW, "Frame Stack Underflow");
- return -1;
- }
- Frame_Pointer_Depth--;
- if (Frame_Pointer_Depth < SLANG_MAX_RECURSIVE_DEPTH)
- {
- Next_Function_Num_Args = (int) (_SLStack_Pointer - Frame_Pointer);
- Frame_Pointer = _SLRun_Stack + Frame_Pointer_Stack [Frame_Pointer_Depth];
- }
- return 0;
-}
-
-_INLINE_
-static int do_bc_call_direct_frame (int (*f)(void))
-{
- if ((0 == SLang_end_arg_list ())
- && (0 == _SL_increment_frame_pointer ()))
- {
- (void) (*f) ();
- _SL_decrement_frame_pointer ();
- }
- if (SLang_Error)
- return -1;
- return 0;
-}
-
-static int do_name_type_error (SLang_Name_Type *nt)
-{
- char buf[256];
- if (nt != NULL)
- {
- (void) _SLsnprintf (buf, sizeof (buf), "(Error occurred processing %s)", nt->name);
- do_traceback (buf, 0, NULL);
- }
- return -1;
-}
-
-/* local and global variable assignments */
-
-static int do_binary_ab (int op, SLang_Object_Type *obja, SLang_Object_Type *objb)
-{
- SLang_Class_Type *a_cl, *b_cl, *c_cl;
- unsigned char b_data_type, a_data_type, c_data_type;
- int (*binary_fun) (int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR);
- VOID_STAR pa;
- VOID_STAR pb;
- VOID_STAR pc;
- int ret;
-
- b_data_type = objb->data_type;
- a_data_type = obja->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (_SLarith_Is_Arith_Type[a_data_type]
- && _SLarith_Is_Arith_Type[b_data_type])
- {
- int status;
- status = _SLarith_bin_op (obja, objb, op);
- if (status != 1)
- return status;
- /* drop and try it the hard way */
- }
-#endif
-
- a_cl = _SLclass_get_class (a_data_type);
- if (a_data_type == b_data_type)
- b_cl = a_cl;
- else
- b_cl = _SLclass_get_class (b_data_type);
-
- if (NULL == (binary_fun = _SLclass_get_binary_fun (op, a_cl, b_cl, &c_cl, 1)))
- return -1;
-
- c_data_type = c_cl->cl_data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [a_data_type])
- pa = (VOID_STAR) &obja->v;
- else
-#endif
- pa = _SLclass_get_ptr_to_value (a_cl, obja);
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [b_data_type])
- pb = (VOID_STAR) &objb->v;
- else
-#endif
- pb = _SLclass_get_ptr_to_value (b_cl, objb);
-
- pc = c_cl->cl_transfer_buf;
-
- if (1 != (*binary_fun) (op,
- a_data_type, pa, 1,
- b_data_type, pb, 1,
- pc))
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "Binary operation between %s and %s failed",
- a_cl->cl_name, b_cl->cl_name);
-
- return -1;
- }
-
- /* apush will create a copy, so make sure we free after the push */
- ret = (*c_cl->cl_apush)(c_data_type, pc);
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [c_data_type])
-#endif
- (*c_cl->cl_adestroy)(c_data_type, pc);
-
- return ret;
-}
-
-_INLINE_
-static void do_binary (int op)
-{
- SLang_Object_Type obja, objb;
-
- if (SLang_pop (&objb)) return;
- if (0 == SLang_pop (&obja))
- {
- (void) do_binary_ab (op, &obja, &objb);
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [obja.data_type])
-#endif
- SLang_free_object (&obja);
- }
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [objb.data_type])
-#endif
- SLang_free_object (&objb);
-}
-
-static int do_unary_op (int op, SLang_Object_Type *obj, int unary_type)
-{
- int (*f) (int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
- VOID_STAR pa;
- VOID_STAR pb;
- SLang_Class_Type *a_cl, *b_cl;
- unsigned char a_type, b_type;
- int ret;
-
- a_type = obj->data_type;
- a_cl = _SLclass_get_class (a_type);
-
- if (NULL == (f = _SLclass_get_unary_fun (op, a_cl, &b_cl, unary_type)))
- return -1;
-
- b_type = b_cl->cl_data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [a_type])
- pa = (VOID_STAR) &obj->v;
- else
-#endif
- pa = _SLclass_get_ptr_to_value (a_cl, obj);
-
- pb = b_cl->cl_transfer_buf;
-
- if (1 != (*f) (op, a_type, pa, 1, pb))
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "Unary operation for %s failed", a_cl->cl_name);
- return -1;
- }
-
- ret = (*b_cl->cl_apush)(b_type, pb);
- /* cl_apush creates a copy, so make sure we call cl_adestroy */
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [b_type])
-#endif
- (*b_cl->cl_adestroy)(b_type, pb);
-
- return ret;
-}
-
-_INLINE_
-static int do_unary (int op, int unary_type)
-{
- SLang_Object_Type obj;
- int ret;
-
- if (-1 == SLang_pop (&obj)) return -1;
- ret = do_unary_op (op, &obj, unary_type);
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [obj.data_type])
-#endif
- SLang_free_object (&obj);
- return ret;
-}
-
-static int do_assignment_binary (int op, SLang_Object_Type *obja_ptr)
-{
- SLang_Object_Type objb;
- int ret;
-
- if (SLang_pop (&objb))
- return -1;
-
- ret = do_binary_ab (op, obja_ptr, &objb);
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [objb.data_type])
-#endif
- SLang_free_object (&objb);
- return ret;
-}
-
-/* The order of these is assumed to match the binary operators
- * defined in slang.h
- */
-static int
-map_assignment_op_to_binary (unsigned char op_type, int *op, int *is_unary)
-{
- *is_unary = 0;
- switch (op_type)
- {
- case _SLANG_BCST_PLUSEQS:
- case _SLANG_BCST_MINUSEQS:
- case _SLANG_BCST_TIMESEQS:
- case _SLANG_BCST_DIVEQS:
- *op = SLANG_PLUS + (op_type - _SLANG_BCST_PLUSEQS);
- break;
-
- case _SLANG_BCST_BOREQS:
- *op = SLANG_BOR;
- break;
-
- case _SLANG_BCST_BANDEQS:
- *op = SLANG_BAND;
- break;
-
- case _SLANG_BCST_POST_MINUSMINUS:
- case _SLANG_BCST_MINUSMINUS:
- *op = SLANG_MINUS;
- *is_unary = 1;
- break;
-
- case _SLANG_BCST_PLUSPLUS:
- case _SLANG_BCST_POST_PLUSPLUS:
- *op = SLANG_PLUS;
- *is_unary = 1;
- break;
-
- default:
- SLang_verror (SL_NOT_IMPLEMENTED, "Assignment operator not implemented");
- return -1;
- }
- return 0;
-}
-
-static int
-perform_lvalue_operation (unsigned char op_type, SLang_Object_Type *obja_ptr)
-{
- switch (op_type)
- {
- case _SLANG_BCST_ASSIGN:
- break;
-
- /* The order of these is assumed to match the binary operators
- * defined in slang.h
- */
- case _SLANG_BCST_PLUSEQS:
- case _SLANG_BCST_MINUSEQS:
- case _SLANG_BCST_TIMESEQS:
- case _SLANG_BCST_DIVEQS:
- if (-1 == do_assignment_binary (SLANG_PLUS + (op_type - _SLANG_BCST_PLUSEQS), obja_ptr))
- return -1;
- break;
-
- case _SLANG_BCST_BOREQS:
- if (-1 == do_assignment_binary (SLANG_BOR, obja_ptr))
- return -1;
- break;
-
- case _SLANG_BCST_BANDEQS:
- if (-1 == do_assignment_binary (SLANG_BAND, obja_ptr))
- return -1;
- break;
-
- case _SLANG_BCST_PLUSPLUS:
- case _SLANG_BCST_POST_PLUSPLUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (obja_ptr->data_type == SLANG_INT_TYPE)
- return SLclass_push_int_obj (SLANG_INT_TYPE, obja_ptr->v.int_val + 1);
-#endif
- if (-1 == do_unary_op (SLANG_PLUSPLUS, obja_ptr, _SLANG_BC_UNARY))
- return -1;
- break;
-
- case _SLANG_BCST_MINUSMINUS:
- case _SLANG_BCST_POST_MINUSMINUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (obja_ptr->data_type == SLANG_INT_TYPE)
- return SLclass_push_int_obj (SLANG_INT_TYPE, obja_ptr->v.int_val - 1);
-#endif
- if (-1 == do_unary_op (SLANG_MINUSMINUS, obja_ptr, _SLANG_BC_UNARY))
- return -1;
- break;
-
- default:
- SLang_Error = SL_INTERNAL_ERROR;
- return -1;
- }
- return 0;
-}
-
-_INLINE_
-static int
-set_lvalue_obj (unsigned char op_type, SLang_Object_Type *obja_ptr)
-{
- if (op_type != _SLANG_BCST_ASSIGN)
- {
- if (-1 == perform_lvalue_operation (op_type, obja_ptr))
- return -1;
- }
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [obja_ptr->data_type])
-#endif
- SLang_free_object (obja_ptr);
-
- return SLang_pop(obja_ptr);
-}
-
-static int
-set_struct_lvalue (SLBlock_Type *bc_blk)
-{
- int type;
- SLang_Class_Type *cl;
- char *name;
- int op;
-
- if (-1 == (type = SLang_peek_at_stack ()))
- return -1;
-
- cl = _SLclass_get_class (type);
- if ((cl->cl_sput == NULL)
- || (cl->cl_sget == NULL))
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "%s does not support structure access",
- cl->cl_name);
- SLdo_pop_n (2); /* object plus what was to be assigned */
- return -1;
- }
- name = bc_blk->b.s_blk;
- op = bc_blk->bc_sub_type;
-
- if (op != _SLANG_BCST_ASSIGN)
- {
- /* We have something like (A.x += b) or (A.x++). In either case,
- * we need A.x.
- */
- SLang_Object_Type obj_A;
- SLang_Object_Type obj;
-
- if (-1 == SLang_pop (&obj_A))
- return -1;
-
- if ((-1 == _SLpush_slang_obj (&obj_A))
- || (-1 == cl->cl_sget ((unsigned char) type, name))
- || (-1 == SLang_pop (&obj)))
- {
- SLang_free_object (&obj_A);
- return -1;
- }
- /* Now the value of A.x is in obj. */
- if (-1 == perform_lvalue_operation (op, &obj))
- {
- SLang_free_object (&obj);
- SLang_free_object (&obj_A);
- return -1;
- }
- SLang_free_object (&obj);
- /* The result of the operation is now on the stack.
- * Perform assignment */
- if (-1 == SLang_push (&obj_A))
- {
- SLang_free_object (&obj_A);
- return -1;
- }
- }
-
- return (*cl->cl_sput) ((unsigned char) type, name);
-}
-
-static int make_unit_object (SLang_Object_Type *a, SLang_Object_Type *u)
-{
- unsigned char type;
-
- type = a->data_type;
- if (type == SLANG_ARRAY_TYPE)
- type = a->v.array_val->data_type;
-
- u->data_type = type;
- switch (type)
- {
- case SLANG_UCHAR_TYPE:
- case SLANG_CHAR_TYPE:
- u->v.char_val = 1;
- break;
-
- case SLANG_SHORT_TYPE:
- case SLANG_USHORT_TYPE:
- u->v.short_val = 1;
- break;
-
- case SLANG_LONG_TYPE:
- case SLANG_ULONG_TYPE:
- u->v.long_val = 1;
- break;
-
-#if SLANG_HAS_FLOAT
- case SLANG_FLOAT_TYPE:
- u->v.float_val = 1;
- break;
-
- case SLANG_COMPLEX_TYPE:
- u->data_type = SLANG_DOUBLE_TYPE;
- case SLANG_DOUBLE_TYPE:
- u->v.double_val = 1;
- break;
-#endif
- default:
- u->data_type = SLANG_INT_TYPE;
- u->v.int_val = 1;
- }
- return 0;
-}
-
-
-/* We want to convert 'A[i] op X' to 'A[i] = A[i] op X'. The code that
- * has been generated is: X __args i A __aput-op
- * where __aput-op represents this function. We need to generate:
- * __args i A __eargs __aget X op __args i A __eargs __aput
- * Here, __eargs implies a call to do_bc_call_direct_frame with either
- * the aput or aget function. In addition, __args represents a call to
- * SLang_start_arg_list. Of course, i represents a set of indices.
- *
- * Note: If op is an unary operation (e.g., ++ or --), then X will not
- * b present an will have to be taken to be 1.
- *
- * Implementation note: For efficiency, calls to setup the frame, start
- * arg list will be omitted and SLang_Num_Function_Args will be set.
- * This is ugly but the alternative is much less efficient rendering these
- * assignment operators useless. So, the plan is to roll the stack to get X,
- * then duplicate the next N values, call __aget followed by op X, finally
- * calling __aput. Hence, the sequence is:
- *
- * start: X i .. j A
- * dupN: X i .. j A i .. j A
- * __aget: X i .. j A Y
- * roll: i .. j A Y X
- * op: i .. j A Z
- * roll: Z i .. j A
- * __aput:
- */
-static int
-set_array_lvalue (int op)
-{
- SLang_Object_Type x, y;
- int num_args, is_unary;
-
- if (-1 == map_assignment_op_to_binary (op, &op, &is_unary))
- return -1;
-
- /* Grab the indices and the array. Do not start a new frame. */
- if (-1 == SLang_end_arg_list ())
- return -1;
- num_args = Next_Function_Num_Args;
- Next_Function_Num_Args = 0;
-
- if (-1 == SLdup_n (num_args))
- return -1;
-
- SLang_Num_Function_Args = num_args;
- if (-1 == _SLarray_aget ())
- return -1;
-
- if (-1 == SLang_pop (&y))
- return -1;
-
- if (is_unary == 0)
- {
- if ((-1 == SLroll_stack (-(num_args + 1)))
- || (-1 == SLang_pop (&x)))
- {
- SLang_free_object (&y);
- return -1;
- }
- }
- else if (-1 == make_unit_object (&y, &x))
- {
- SLang_free_object (&y);
- return -1;
- }
-
- if (-1 == do_binary_ab (op, &y, &x))
- {
- SLang_free_object (&y);
- SLang_free_object (&x);
- return -1;
- }
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [y.data_type])
-#endif
- SLang_free_object (&y);
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [x.data_type])
-#endif
- SLang_free_object (&x);
-
- if (-1 == SLroll_stack (num_args + 1))
- return -1;
-
- SLang_Num_Function_Args = num_args;
- return _SLarray_aput ();
-}
-
-
-static int
-set_intrin_lvalue (SLBlock_Type *bc_blk)
-{
- unsigned char op_type;
- SLang_Object_Type obja;
- SLang_Class_Type *cl;
- SLang_Intrin_Var_Type *ivar;
- VOID_STAR intrinsic_addr;
- unsigned char intrinsic_type;
-
- ivar = bc_blk->b.nt_ivar_blk;
-
- intrinsic_type = ivar->type;
- intrinsic_addr = ivar->addr;
-
- op_type = bc_blk->bc_sub_type;
-
- cl = _SLclass_get_class (intrinsic_type);
-
- if (op_type != _SLANG_BCST_ASSIGN)
- {
- /* We want to get the current value into obja. This is the
- * easiest way.
- */
- if ((-1 == (*cl->cl_push) (intrinsic_type, intrinsic_addr))
- || (-1 == SLang_pop (&obja)))
- return -1;
-
- (void) perform_lvalue_operation (op_type, &obja);
- SLang_free_object (&obja);
-
- if (SLang_Error)
- return -1;
- }
-
- return (*cl->cl_pop) (intrinsic_type, intrinsic_addr);
-}
-
-int _SLang_deref_assign (SLang_Ref_Type *ref)
-{
- SLang_Object_Type *objp;
- SLang_Name_Type *nt;
- SLBlock_Type blk;
-
- if (ref->is_global == 0)
- {
- objp = ref->v.local_obj;
- if (objp > Local_Variable_Frame)
- {
- SLang_verror (SL_UNDEFINED_NAME, "Local variable reference is out of scope");
- return -1;
- }
- return set_lvalue_obj (_SLANG_BCST_ASSIGN, objp);
- }
-
- nt = ref->v.nt;
- switch (nt->name_type)
- {
- case SLANG_GVARIABLE:
- case SLANG_PVARIABLE:
- if (-1 == set_lvalue_obj (_SLANG_BCST_ASSIGN,
- &((SLang_Global_Var_Type *)nt)->obj))
- {
- do_name_type_error (nt);
- return -1;
- }
- break;
-
- case SLANG_IVARIABLE:
- blk.b.nt_blk = nt;
- blk.bc_sub_type = _SLANG_BCST_ASSIGN;
- if (-1 == set_intrin_lvalue (&blk))
- {
- do_name_type_error (nt);
- return -1;
- }
- break;
-
- case SLANG_LVARIABLE:
- SLang_Error = SL_INTERNAL_ERROR;
- /* set_intrin_lvalue (&blk); */
- return -1;
-
- case SLANG_RVARIABLE:
- default:
- SLang_verror (SL_READONLY_ERROR, "deref assignment to %s not allowed", nt->name);
- return -1;
- }
-
- return 0;
-}
-
-static void set_deref_lvalue (SLBlock_Type *bc_blk)
-{
- SLang_Object_Type *objp;
- SLang_Ref_Type *ref;
-
- switch (bc_blk->bc_sub_type)
- {
- case SLANG_LVARIABLE:
- objp = (Local_Variable_Frame - bc_blk->b.i_blk);
- break;
- case SLANG_GVARIABLE:
- case SLANG_PVARIABLE:
- objp = &bc_blk->b.nt_gvar_blk->obj;
- break;
- default:
- SLang_Error = SL_INTERNAL_ERROR;
- return;
- }
-
- if (-1 == _SLpush_slang_obj (objp))
- return;
-
- if (-1 == SLang_pop_ref (&ref))
- return;
- (void) _SLang_deref_assign (ref);
- SLang_free_ref (ref);
-}
-
-static int push_struct_field (char *name)
-{
- int type;
- SLang_Class_Type *cl;
-
- if (-1 == (type = SLang_peek_at_stack ()))
- return -1;
-
- cl = _SLclass_get_class ((unsigned char) type);
- if (cl->cl_sget == NULL)
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "%s does not permit structure access",
- cl->cl_name);
- SLdo_pop_n (2);
- return -1;
- }
-
- return (*cl->cl_sget) ((unsigned char) type, name);
-}
-
-static void trace_dump (char *format, char *name, SLang_Object_Type *objs, int n, int dir)
-{
- unsigned int len;
- char prefix [52];
-
- len = Trace_Mode - 1;
- if (len + 2 >= sizeof (prefix))
- len = sizeof (prefix) - 2;
-
- SLMEMSET (prefix, ' ', len);
- prefix[len] = 0;
-
- call_dump_routine (prefix);
- call_dump_routine (format, name, n);
-
- if (n > 0)
- {
- prefix[len] = ' ';
- len++;
- prefix[len] = 0;
-
- _SLdump_objects (prefix, objs, n, dir);
- }
-}
-
-/* Pop a data item from the stack and return a pointer to it.
- * Strings are not freed from stack so use another routine to do it.
- */
-static VOID_STAR pop_pointer (SLang_Object_Type *obj, unsigned char type)
-{
-#ifndef _SLANG_OPTIMIZE_FOR_SPEED
- SLang_Class_Type *cl;
-#endif
-
- SLang_Array_Type *at;
-
- /* Arrays are special. Allow scalars to automatically convert to arrays.
- */
- if (type == SLANG_ARRAY_TYPE)
- {
- if (-1 == SLang_pop_array (&at, 1))
- return NULL;
- obj->data_type = SLANG_ARRAY_TYPE;
- return obj->v.ptr_val = (VOID_STAR) at;
- }
-
- if (type == 0)
- {
- /* This happens when an intrinsic is declared without any information
- * regarding parameter types.
- */
- if (-1 == SLang_pop (obj))
- return NULL;
- type = obj->data_type;
- }
- else if (-1 == _SLang_pop_object_of_type (type, obj, 0))
- return NULL;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- type = _SLclass_Class_Type [type];
-#else
- type = _SLclass_get_class (type)->cl_class_type;
-#endif
-
- if (type == SLANG_CLASS_TYPE_SCALAR)
- return (VOID_STAR) &obj->v;
- else if (type == SLANG_CLASS_TYPE_MMT)
- return SLang_object_from_mmt (obj->v.ref);
- else
- return obj->v.ptr_val;
-}
-
-/* This is ugly. Does anyone have a advice for a cleaner way of doing
- * this??
- */
-typedef void (*VF0_Type)(void);
-typedef void (*VF1_Type)(VOID_STAR);
-typedef void (*VF2_Type)(VOID_STAR, VOID_STAR);
-typedef void (*VF3_Type)(VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF4_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF5_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF6_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF7_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF0_Type)(void);
-typedef long (*LF1_Type)(VOID_STAR);
-typedef long (*LF2_Type)(VOID_STAR, VOID_STAR);
-typedef long (*LF3_Type)(VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF4_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF5_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF6_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF7_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-#if SLANG_HAS_FLOAT
-typedef double (*FF0_Type)(void);
-typedef double (*FF1_Type)(VOID_STAR);
-typedef double (*FF2_Type)(VOID_STAR, VOID_STAR);
-typedef double (*FF3_Type)(VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF4_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF5_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF6_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF7_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-#endif
-
-static int execute_intrinsic_fun (SLang_Intrin_Fun_Type *objf)
-{
-#if SLANG_HAS_FLOAT
- double xf;
-#endif
- VOID_STAR p[SLANG_MAX_INTRIN_ARGS];
- SLang_Object_Type objs[SLANG_MAX_INTRIN_ARGS];
- long ret;
- unsigned char type;
- unsigned int argc;
- unsigned int i;
- FVOID_STAR fptr;
- unsigned char *arg_types;
- int stk_depth;
-
- fptr = objf->i_fun;
- argc = objf->num_args;
- type = objf->return_type;
- arg_types = objf->arg_types;
-
- if (argc > SLANG_MAX_INTRIN_ARGS)
- {
- SLang_verror(SL_APPLICATION_ERROR,
- "Intrinsic function %s requires too many parameters", objf->name);
- return -1;
- }
-
- if (-1 == _SL_increment_frame_pointer ())
- return -1;
-
- stk_depth = -1;
- if (Trace_Mode && (_SLang_Trace > 0))
- {
- int nargs;
-
- stk_depth = _SLstack_depth ();
-
- nargs = SLang_Num_Function_Args;
- if (nargs == 0)
- nargs = (int)argc;
-
- stk_depth -= nargs;
-
- if (stk_depth >= 0)
- trace_dump (">>%s (%d args)\n",
- objf->name,
- _SLStack_Pointer - nargs,
- nargs,
- 1);
- }
-
- i = argc;
- while (i != 0)
- {
- i--;
- if (NULL == (p[i] = pop_pointer (objs + i, arg_types[i])))
- {
- i++;
- goto free_and_return;
- }
- }
-
- ret = 0;
-#if SLANG_HAS_FLOAT
- xf = 0.0;
-#endif
-
- switch (argc)
- {
- case 0:
- if (type == SLANG_VOID_TYPE) ((VF0_Type) fptr) ();
-#if SLANG_HAS_FLOAT
- else if (type == SLANG_DOUBLE_TYPE) xf = ((FF0_Type) fptr)();
-#endif
- else ret = ((LF0_Type) fptr)();
- break;
-
- case 1:
- if (type == SLANG_VOID_TYPE) ((VF1_Type) fptr)(p[0]);
-#if SLANG_HAS_FLOAT
- else if (type == SLANG_DOUBLE_TYPE) xf = ((FF1_Type) fptr)(p[0]);
-#endif
- else ret = ((LF1_Type) fptr)(p[0]);
- break;
-
- case 2:
- if (type == SLANG_VOID_TYPE) ((VF2_Type) fptr)(p[0], p[1]);
-#if SLANG_HAS_FLOAT
- else if (type == SLANG_DOUBLE_TYPE) xf = ((FF2_Type) fptr)(p[0], p[1]);
-#endif
- else ret = ((LF2_Type) fptr)(p[0], p[1]);
- break;
-
- case 3:
- if (type == SLANG_VOID_TYPE) ((VF3_Type) fptr)(p[0], p[1], p[2]);
-#if SLANG_HAS_FLOAT
- else if (type == SLANG_DOUBLE_TYPE) xf = ((FF3_Type) fptr)(p[0], p[1], p[2]);
-#endif
- else ret = ((LF3_Type) fptr)(p[0], p[1], p[2]);
- break;
-
- case 4:
- if (type == SLANG_VOID_TYPE) ((VF4_Type) fptr)(p[0], p[1], p[2], p[3]);
-#if SLANG_HAS_FLOAT
- else if (type == SLANG_DOUBLE_TYPE) xf = ((FF4_Type) fptr)(p[0], p[1], p[2], p[3]);
-#endif
- else ret = ((LF4_Type) fptr)(p[0], p[1], p[2], p[3]);
- break;
-
- case 5:
- if (type == SLANG_VOID_TYPE) ((VF5_Type) fptr)(p[0], p[1], p[2], p[3], p[4]);
-#if SLANG_HAS_FLOAT
- else if (type == SLANG_DOUBLE_TYPE) xf = ((FF5_Type) fptr)(p[0], p[1], p[2], p[3], p[4]);
-#endif
- else ret = ((LF5_Type) fptr)(p[0], p[1], p[2], p[3], p[4]);
- break;
-
- case 6:
- if (type == SLANG_VOID_TYPE) ((VF6_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5]);
-#if SLANG_HAS_FLOAT
- else if (type == SLANG_DOUBLE_TYPE) xf = ((FF6_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5]);
-#endif
- else ret = ((LF6_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5]);
- break;
-
- case 7:
- if (type == SLANG_VOID_TYPE) ((VF7_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5], p[6]);
-#if SLANG_HAS_FLOAT
- else if (type == SLANG_DOUBLE_TYPE) xf = ((FF7_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5], p[6]);
-#endif
- else ret = ((LF7_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5], p[6]);
- break;
- }
-
- switch (type)
- {
- case SLANG_VOID_TYPE:
- break;
-
-#if SLANG_HAS_FLOAT
- case SLANG_DOUBLE_TYPE:
- (void) SLang_push_double (xf);
- break;
-#endif
- case SLANG_UINT_TYPE:
- case SLANG_INT_TYPE: (void) SLclass_push_int_obj (type, (int) ret);
- break;
-
- case SLANG_CHAR_TYPE:
- case SLANG_UCHAR_TYPE: (void) SLclass_push_char_obj (type, (char) ret);
- break;
-
- case SLANG_SHORT_TYPE:
- case SLANG_USHORT_TYPE: (void) SLclass_push_short_obj (type, (short) ret);
- break;
-
- case SLANG_LONG_TYPE:
- case SLANG_ULONG_TYPE: (void) SLclass_push_long_obj (type, ret);
- break;
-
- case SLANG_STRING_TYPE:
- if (NULL == (char *)ret)
- {
- if (SLang_Error == 0) SLang_Error = SL_INTRINSIC_ERROR;
- }
- else (void) SLang_push_string ((char *)ret);
- break;
-
- default:
- SLang_verror (SL_NOT_IMPLEMENTED,
- "Support for intrinsic functions returning %s is not provided",
- SLclass_get_datatype_name (type));
- }
-
- if (stk_depth >= 0)
- {
- stk_depth = _SLstack_depth () - stk_depth;
-
- trace_dump ("<<%s (returning %d values)\n",
- objf->name,
- _SLStack_Pointer - stk_depth,
- stk_depth,
- 1);
- }
-
- free_and_return:
- while (i < argc)
- {
- SLang_free_object (objs + i);
- i++;
- }
-
- return _SL_decrement_frame_pointer ();
-}
-
-static int inner_interp(register SLBlock_Type *);
-
-/* Switch_Obj_Ptr points to the NEXT available free switch object */
-static SLang_Object_Type Switch_Objects[SLANG_MAX_NESTED_SWITCH];
-static SLang_Object_Type *Switch_Obj_Ptr = Switch_Objects;
-static SLang_Object_Type *Switch_Obj_Max = Switch_Objects + SLANG_MAX_NESTED_SWITCH;
-
-static void
-lang_do_loops (unsigned char stype, SLBlock_Type *block, unsigned int num_blocks)
-{
- int i, ctrl;
- int first, last;
- SLBlock_Type *blks[4];
- char *loop_name;
- SLang_Foreach_Context_Type *foreach_context;
- SLang_Class_Type *cl;
- int type;
- unsigned int j;
-
- j = 0;
- for (i = 0; i < (int) num_blocks; i++)
- {
- if (block[i].bc_main_type != _SLANG_BC_BLOCK)
- {
- if (block[i].bc_main_type == _SLANG_BC_LINE_NUM)
- continue;
-
- SLang_verror (SL_SYNTAX_ERROR, "Bytecode is not a looping block");
- return;
- }
- blks[j] = block[i].b.blk;
- j++;
- }
-
- num_blocks = j;
- block = blks[0];
-
- switch (stype)
- {
- case _SLANG_BCST_FOREACH:
- loop_name = "foreach";
- if (num_blocks != 1)
- goto wrong_num_blocks_error;
-
- /* We should find Next_Function_Num_Args + 1 items on the stack.
- * The first Next_Function_Num_Args items represent the arguments to
- * to USING. The last item (deepest in stack) is the object to loop
- * over. So, roll the stack up and grab it.
- */
- if ((-1 == SLroll_stack (-(Next_Function_Num_Args + 1)))
- || (-1 == (type = SLang_peek_at_stack ())))
- goto return_error;
-
- cl = _SLclass_get_class ((unsigned char) type);
- if ((cl->cl_foreach == NULL)
- || (cl->cl_foreach_open == NULL)
- || (cl->cl_foreach_close == NULL))
- {
- SLang_verror (SL_NOT_IMPLEMENTED, "%s does not permit foreach", cl->cl_name);
- SLdo_pop_n (Next_Function_Num_Args + 1);
- goto return_error;
- }
-
- if (NULL == (foreach_context = (*cl->cl_foreach_open) ((unsigned char)type, Next_Function_Num_Args)))
- goto return_error;
-
- while (1)
- {
- int status;
-
- if (SLang_Error)
- {
- (*cl->cl_foreach_close) ((unsigned char) type, foreach_context);
- goto return_error;
- }
-
- status = (*cl->cl_foreach) ((unsigned char) type, foreach_context);
- if (status <= 0)
- {
- if (status == 0)
- break;
-
- (*cl->cl_foreach_close) ((unsigned char) type, foreach_context);
- goto return_error;
- }
-
- inner_interp (block);
- if (Lang_Break) break;
- Lang_Break_Condition = /* Lang_Continue = */ 0;
- }
- (*cl->cl_foreach_close) ((unsigned char) type, foreach_context);
- break;
-
- case _SLANG_BCST_WHILE:
- loop_name = "while";
-
- if (num_blocks != 2)
- goto wrong_num_blocks_error;
-
- type = blks[1]->bc_main_type;
- while (1)
- {
- if (SLang_Error)
- goto return_error;
-
- inner_interp (block);
- if (Lang_Break) break;
-
- if (-1 == pop_ctrl_integer (&ctrl))
- goto return_error;
-
- if (ctrl == 0) break;
-
- if (type)
- {
- inner_interp (blks[1]);
- if (Lang_Break) break;
- Lang_Break_Condition = /* Lang_Continue = */ 0;
- }
- }
- break;
-
- case _SLANG_BCST_DOWHILE:
- loop_name = "do...while";
-
- if (num_blocks != 2)
- goto wrong_num_blocks_error;
-
- while (1)
- {
- if (SLang_Error)
- goto return_error;
-
- Lang_Break_Condition = /* Lang_Continue = */ 0;
- inner_interp (block);
- if (Lang_Break) break;
- Lang_Break_Condition = /* Lang_Continue = */ 0;
- inner_interp (blks[1]);
- if (-1 == pop_ctrl_integer (&ctrl))
- goto return_error;
-
- if (ctrl == 0) break;
- }
- break;
-
- case _SLANG_BCST_CFOR:
- loop_name = "for";
-
- /* we need 4 blocks: first 3 control, the last is code */
- if (num_blocks != 4) goto wrong_num_blocks_error;
-
- inner_interp (block);
- while (1)
- {
- if (SLang_Error)
- goto return_error;
-
- inner_interp(blks[1]); /* test */
- if (-1 == pop_ctrl_integer (&ctrl))
- goto return_error;
-
- if (ctrl == 0) break;
- inner_interp(blks[3]); /* code */
- if (Lang_Break) break;
- inner_interp(blks[2]); /* bump */
- Lang_Break_Condition = /* Lang_Continue = */ 0;
- }
- break;
-
- case _SLANG_BCST_FOR:
- loop_name = "_for";
-
- if (num_blocks != 1)
- goto wrong_num_blocks_error;
-
- /* 3 elements: first, last, step */
- if ((-1 == SLang_pop_integer (&ctrl))
- || (-1 == SLang_pop_integer (&last))
- || (-1 == SLang_pop_integer (&first)))
- goto return_error;
-
- i = first;
- while (1)
- {
- /* It is ugly to have this test here but I do not know of a
- * simple way to do this without using two while loops.
- */
- if (ctrl >= 0)
- {
- if (i > last) break;
- }
- else if (i < last) break;
-
- if (SLang_Error) goto return_error;
-
- SLclass_push_int_obj (SLANG_INT_TYPE, i);
- inner_interp (block);
- if (Lang_Break) break;
- Lang_Break_Condition = /* Lang_Continue = */ 0;
-
- i += ctrl;
- }
- break;
-
- case _SLANG_BCST_LOOP:
- loop_name = "loop";
- if (num_blocks != 1)
- goto wrong_num_blocks_error;
-
- if (-1 == SLang_pop_integer (&ctrl))
- goto return_error;
- while (ctrl > 0)
- {
- ctrl--;
-
- if (SLang_Error)
- goto return_error;
-
- inner_interp (block);
- if (Lang_Break) break;
- Lang_Break_Condition = /* Lang_Continue = */ 0;
- }
- break;
-
- case _SLANG_BCST_FOREVER:
- loop_name = "forever";
-
- if (num_blocks != 1)
- goto wrong_num_blocks_error;
-
- while (1)
- {
- if (SLang_Error)
- goto return_error;
-
- inner_interp (block);
- if (Lang_Break) break;
- Lang_Break_Condition = /* Lang_Continue = */ 0;
- }
- break;
-
- default: SLang_verror(SL_INTERNAL_ERROR, "Unknown loop type");
- return;
- }
- Lang_Break = /* Lang_Continue = */ 0;
- Lang_Break_Condition = Lang_Return;
- return;
-
- wrong_num_blocks_error:
- SLang_verror (SL_SYNTAX_ERROR, "Wrong number of blocks for '%s' construct", loop_name);
-
- /* drop */
- return_error:
- do_traceback (loop_name, 0, NULL);
-}
-
-static void lang_do_and_orelse (unsigned char stype, SLBlock_Type *addr, SLBlock_Type *addr_max)
-{
- int test = 0;
- int is_or;
-
- is_or = (stype == _SLANG_BCST_ORELSE);
-
- while (addr <= addr_max)
- {
- if (addr->bc_main_type == _SLANG_BC_LINE_NUM)
- {
- addr++;
- continue;
- }
-
- inner_interp (addr->b.blk);
- if (SLang_Error
- || Lang_Break_Condition
- || (-1 == pop_ctrl_integer (&test)))
- return;
-
- if (is_or == (test != 0))
- break;
-
- /* if (((stype == _SLANG_BCST_ANDELSE) && (test == 0))
- * || ((stype == _SLANG_BCST_ORELSE) && test))
- * break;
- */
-
- addr++;
- }
- SLclass_push_int_obj (SLANG_INT_TYPE, test);
-}
-
-static void do_else_if (SLBlock_Type *zero_block, SLBlock_Type *non_zero_block)
-{
- int test;
-
- if (-1 == pop_ctrl_integer (&test))
- return;
-
- if (test == 0)
- non_zero_block = zero_block;
-
- if (non_zero_block != NULL)
- inner_interp (non_zero_block->b.blk);
-}
-
-int _SLang_trace_fun (char *f)
-{
- if (NULL == (f = SLang_create_slstring (f)))
- return -1;
-
- SLang_free_slstring (Trace_Function);
- Trace_Function = f;
- _SLang_Trace = 1;
- return 0;
-}
-
-int _SLdump_objects (char *prefix, SLang_Object_Type *x, unsigned int n, int dir)
-{
- char *s;
- SLang_Class_Type *cl;
-
- while (n)
- {
- cl = _SLclass_get_class (x->data_type);
-
- if (NULL == (s = _SLstringize_object (x)))
- s = "??";
-
- call_dump_routine ("%s[%s]:%s\n", prefix, cl->cl_name, s);
-
- SLang_free_slstring (s);
-
- x += dir;
- n--;
- }
- return 0;
-}
-
-static SLBlock_Type *Exit_Block_Ptr;
-static SLBlock_Type *Global_User_Block[5];
-static SLBlock_Type **User_Block_Ptr = Global_User_Block;
-char *_SLang_Current_Function_Name = NULL;
-
-static int execute_slang_fun (_SLang_Function_Type *fun)
-{
- register unsigned int i;
- register SLang_Object_Type *frame, *lvf;
- register unsigned int n_locals;
- _SLBlock_Header_Type *header;
- /* SLBlock_Type *val; */
- SLBlock_Type *exit_block_save;
- SLBlock_Type **user_block_save;
- SLBlock_Type *user_blocks[5];
- char *save_fname;
-
- exit_block_save = Exit_Block_Ptr;
- user_block_save = User_Block_Ptr;
- User_Block_Ptr = user_blocks;
- *(user_blocks) = NULL;
- *(user_blocks + 1) = NULL;
- *(user_blocks + 2) = NULL;
- *(user_blocks + 3) = NULL;
- *(user_blocks + 4) = NULL;
-
- Exit_Block_Ptr = NULL;
-
- save_fname = _SLang_Current_Function_Name;
- _SLang_Current_Function_Name = fun->name;
-
- _SL_increment_frame_pointer ();
-
- /* need loaded? */
- if (fun->nlocals == AUTOLOAD_NUM_LOCALS)
- {
- header = NULL;
- if (-1 == SLang_load_file(fun->v.autoload_filename))
- goto the_return;
-
- if (fun->nlocals == AUTOLOAD_NUM_LOCALS)
- {
- SLang_verror (SL_UNDEFINED_NAME, "%s: Function did not autoload",
- _SLang_Current_Function_Name);
- goto the_return;
- }
- }
-
- n_locals = fun->nlocals;
-
- /* let the error propagate through since it will do no harm
- and allow us to restore stack. */
-
- /* set new stack frame */
- lvf = frame = Local_Variable_Frame;
- i = n_locals;
- if ((lvf + i) > Local_Variable_Stack + SLANG_MAX_LOCAL_STACK)
- {
- SLang_verror(SL_STACK_OVERFLOW, "%s: Local Variable Stack Overflow",
- _SLang_Current_Function_Name);
- goto the_return;
- }
-
- /* Make sure we do not allow this header to get destroyed by something
- * like: define crash () { eval ("define crash ();") }
- */
- header = fun->v.header;
- header->num_refs++;
-
- while (i--)
- {
- lvf++;
- lvf->data_type = SLANG_UNDEFINED_TYPE;
- }
- Local_Variable_Frame = lvf;
-
- /* read values of function arguments */
- i = fun->nargs;
- while (i > 0)
- {
- i--;
- (void) SLang_pop (Local_Variable_Frame - i);
- }
-
- if (SLang_Enter_Function != NULL) (*SLang_Enter_Function)(_SLang_Current_Function_Name);
-
- if (_SLang_Trace)
- {
- int stack_depth;
-
- stack_depth = _SLstack_depth ();
-
- if ((Trace_Function != NULL)
- && (0 == strcmp (Trace_Function, _SLang_Current_Function_Name))
- && (Trace_Mode == 0))
- Trace_Mode = 1;
-
- if (Trace_Mode)
- {
- /* The local variable frame grows backwards */
- trace_dump (">>%s (%d args)\n",
- _SLang_Current_Function_Name,
- Local_Variable_Frame,
- (int) fun->nargs,
- -1);
- Trace_Mode++;
- }
-
- inner_interp (header->body);
- Lang_Break_Condition = Lang_Return = Lang_Break = 0;
- if (Exit_Block_Ptr != NULL) inner_interp(Exit_Block_Ptr);
-
- if (Trace_Mode)
- {
- Trace_Mode--;
- stack_depth = _SLstack_depth () - stack_depth;
-
- trace_dump ("<<%s (returning %d values)\n",
- _SLang_Current_Function_Name,
- _SLStack_Pointer - stack_depth,
- stack_depth,
- 1);
-
- if (Trace_Mode == 1)
- Trace_Mode = 0;
- }
- }
- else
- {
- inner_interp (header->body);
- Lang_Break_Condition = Lang_Return = Lang_Break = 0;
- if (Exit_Block_Ptr != NULL) inner_interp(Exit_Block_Ptr);
- }
-
- if (SLang_Exit_Function != NULL) (*SLang_Exit_Function)(_SLang_Current_Function_Name);
-
- if (SLang_Error)
- do_traceback(fun->name, n_locals,
-#if _SLANG_HAS_DEBUG_CODE
- fun->file
-#else
- NULL
-#endif
- );
-
- /* free local variables.... */
- lvf = Local_Variable_Frame;
- while (lvf > frame)
- {
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [lvf->data_type])
-#endif
- SLang_free_object (lvf);
- lvf--;
- }
- Local_Variable_Frame = lvf;
-
- if (header->num_refs == 1)
- free_function_header (header);
- else
- header->num_refs--;
-
- the_return:
-
- Lang_Break_Condition = Lang_Return = Lang_Break = 0;
- Exit_Block_Ptr = exit_block_save;
- User_Block_Ptr = user_block_save;
- _SLang_Current_Function_Name = save_fname;
- _SL_decrement_frame_pointer ();
-
- if (SLang_Error)
- return -1;
-
- return 0;
-}
-
-static void do_traceback (char *name, unsigned int locals, char *file)
-{
- char *s;
- unsigned int i;
- SLang_Object_Type *objp;
- unsigned short stype;
-
- /* FIXME: Priority=low
- * I need to make this configurable!!! That is, let the
- * application decide whether or not a usage error should result in a
- * traceback.
- */
- if (SLang_Error == SL_USAGE_ERROR)
- return;
-
- if (SLang_Traceback == 0)
- return;
-
- call_dump_routine ("S-Lang Traceback: %s\n", name);
- if (SLang_Traceback < 0)
- return;
-
- if (file != NULL)
- call_dump_routine ("File: %s\n", file);
-
- if (locals == 0)
- return;
-
- call_dump_routine (" Local Variables:\n");
-
- for (i = 0; i < locals; i++)
- {
- SLang_Class_Type *cl;
- char *class_name;
-
- objp = Local_Variable_Frame - i;
- stype = objp->data_type;
-
- s = _SLstringize_object (objp);
- cl = _SLclass_get_class (stype);
- class_name = cl->cl_name;
-
- call_dump_routine ("\t$%d: Type: %s,\tValue:\t", i, class_name);
-
- if (s == NULL) call_dump_routine("??\n");
- else
- {
- char *q = "";
-#ifndef HAVE_VSNPRINTF
- char buf[256];
- if (strlen (s) >= sizeof (buf))
- {
- strncpy (buf, s, sizeof(buf));
- s = buf;
- s[sizeof(buf) - 1] = 0;
- }
-#endif
- if (SLANG_STRING_TYPE == stype) q = "\"";
- call_dump_routine ("%s%s%s\n", q, s, q);
- }
- }
-}
-
-static void do_app_unary (SLang_App_Unary_Type *nt)
-{
- if (-1 == do_unary (nt->unary_op, nt->name_type))
- do_traceback (nt->name, 0, NULL);
-}
-
-static int inner_interp_nametype (SLang_Name_Type *nt)
-{
- SLBlock_Type bc_blks[2];
-
- bc_blks[0].b.nt_blk = nt;
- bc_blks[0].bc_main_type = nt->name_type;
- bc_blks[1].bc_main_type = 0;
- return inner_interp(bc_blks);
-}
-
-int _SLang_dereference_ref (SLang_Ref_Type *ref)
-{
- if (ref == NULL)
- {
- SLang_Error = SL_INTERNAL_ERROR;
- return -1;
- }
-
- if (ref->is_global == 0)
- {
- SLang_Object_Type *obj = ref->v.local_obj;
- if (obj > Local_Variable_Frame)
- {
- SLang_verror (SL_UNDEFINED_NAME, "Local variable deref is out of scope");
- return -1;
- }
- return _SLpush_slang_obj (ref->v.local_obj);
- }
-
- (void) inner_interp_nametype (ref->v.nt);
- return 0;
-}
-
-int _SLang_is_ref_initialized (SLang_Ref_Type *ref)
-{
- unsigned char type;
-
- if (ref == NULL)
- {
- SLang_Error = SL_INTERNAL_ERROR;
- return -1;
- }
-
- if (ref->is_global == 0)
- {
- SLang_Object_Type *obj = ref->v.local_obj;
- if (obj > Local_Variable_Frame)
- {
- SLang_verror (SL_UNDEFINED_NAME, "Local variable deref is out of scope");
- return -1;
- }
- type = ref->v.local_obj->data_type;
- }
- else
- {
- SLang_Name_Type *nt = ref->v.nt;
- if ((nt->name_type != SLANG_GVARIABLE)
- && (nt->name_type != SLANG_PVARIABLE))
- return 1;
- type = ((SLang_Global_Var_Type *)nt)->obj.data_type;
- }
- return type != SLANG_UNDEFINED_TYPE;
-}
-
-int _SLang_uninitialize_ref (SLang_Ref_Type *ref)
-{
- SLang_Object_Type *obj;
-
- if (ref == NULL)
- {
- SLang_Error = SL_INTERNAL_ERROR;
- return -1;
- }
-
- if (ref->is_global == 0)
- {
- obj = ref->v.local_obj;
- if (obj > Local_Variable_Frame)
- {
- SLang_verror (SL_UNDEFINED_NAME, "Local variable deref is out of scope");
- return -1;
- }
- obj = ref->v.local_obj;
- }
- else
- {
- SLang_Name_Type *nt = ref->v.nt;
- if ((nt->name_type != SLANG_GVARIABLE)
- && (nt->name_type != SLANG_PVARIABLE))
- return -1;
- obj = &((SLang_Global_Var_Type *)nt)->obj;
- }
- SLang_free_object (obj);
- obj->data_type = SLANG_UNDEFINED_TYPE;
- obj->v.ptr_val = NULL;
- return 0;
-}
-
-void (*SLang_Interrupt)(void);
-static int Last_Error;
-void (*SLang_User_Clear_Error)(void);
-void _SLang_clear_error (void)
-{
- if (Last_Error <= 0)
- {
- Last_Error = 0;
- return;
- }
- Last_Error--;
- if (SLang_User_Clear_Error != NULL) (*SLang_User_Clear_Error)();
-}
-
-int _SLpush_slang_obj (SLang_Object_Type *obj)
-{
- unsigned char subtype;
- SLang_Class_Type *cl;
-
- if (obj == NULL) return SLang_push_null ();
-
- subtype = obj->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type[subtype])
- return SLang_push (obj);
-#endif
-
- cl = _SLclass_get_class (subtype);
- return (*cl->cl_push) (subtype, (VOID_STAR) &obj->v);
-}
-
-_INLINE_
-static int push_local_variable (int i)
-{
- SLang_Class_Type *cl;
- SLang_Object_Type *obj;
- unsigned char subtype;
-
- obj = Local_Variable_Frame - i;
- subtype = obj->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type[subtype])
- return SLang_push (obj);
- if (subtype == SLANG_STRING_TYPE)
- return _SLang_dup_and_push_slstring (obj->v.s_val);
-#endif
-
- cl = _SLclass_get_class (subtype);
- return (*cl->cl_push) (subtype, (VOID_STAR) &obj->v);
-}
-
-static int push_intrinsic_variable (SLang_Intrin_Var_Type *ivar)
-{
- SLang_Class_Type *cl;
- unsigned char stype;
-
- stype = ivar->type;
- cl = _SLclass_get_class (stype);
-
- if (-1 == (*cl->cl_push_intrinsic) (stype, ivar->addr))
- {
- do_name_type_error ((SLang_Name_Type *) ivar);
- return -1;
- }
- return 0;
-}
-
-static int dereference_object (void)
-{
- SLang_Object_Type obj;
- SLang_Class_Type *cl;
- unsigned char type;
- int ret;
-
- if (-1 == SLang_pop (&obj))
- return -1;
-
- type = obj.data_type;
-
- cl = _SLclass_get_class (type);
- ret = (*cl->cl_dereference)(type, (VOID_STAR) &obj.v);
-
- SLang_free_object (&obj);
- return ret;
-}
-
-static int case_function (void)
-{
- unsigned char type;
- SLang_Object_Type obj;
- SLang_Object_Type *swobjptr;
-
- swobjptr = Switch_Obj_Ptr - 1;
-
- if ((swobjptr < Switch_Objects)
- || (0 == (type = swobjptr->data_type)))
- {
- SLang_verror (SL_SYNTAX_ERROR, "Misplaced 'case' keyword");
- return -1;
- }
-
- if (-1 == SLang_pop (&obj))
- return -1;
-
- if (obj.data_type != type)
- {
- SLang_Class_Type *a_cl, *b_cl;
-
- a_cl = _SLclass_get_class (obj.data_type);
- b_cl = _SLclass_get_class (type);
-
- if (NULL == _SLclass_get_binary_fun (SLANG_EQ, a_cl, b_cl, &a_cl, 0))
- {
- (void) SLclass_push_int_obj (SLANG_INT_TYPE, 0);
- SLang_free_object (&obj);
- return 0;
- }
- }
-
- (void) do_binary_ab (SLANG_EQ, swobjptr, &obj);
- SLang_free_object (&obj);
- return 0;
-}
-
-static void tmp_variable_function (SLBlock_Type *addr)
-{
- SLang_Object_Type *obj;
-
- switch (addr->bc_sub_type)
- {
- case SLANG_GVARIABLE:
- case SLANG_PVARIABLE:
- obj = &addr->b.nt_gvar_blk->obj;
- break;
-
- case SLANG_LVARIABLE:
- obj = Local_Variable_Frame - addr->b.i_blk;
- break;
-
- default:
- SLang_Error = SL_INTERNAL_ERROR;
- return;
- }
-
- /* There is no need to go through higher level routines since we are
- * not creating or destroying extra copies.
- */
- if (-1 == SLang_push (obj))
- return;
-
- obj->data_type = SLANG_UNDEFINED_TYPE;
- obj->v.ptr_val = NULL;
-}
-
-
-static int
-do_inner_interp_error (SLBlock_Type *err_block,
- SLBlock_Type *addr_start,
- SLBlock_Type *addr)
-{
- int save_err, slerr;
-
- /* Someday I can use the these variable to provide extra information
- * about what went wrong.
- */
- (void) addr_start;
- (void) addr;
-
- if (err_block == NULL)
- goto return_error;
-
- if (SLang_Error < 0) /* errors less than 0 are severe */
- goto return_error;
-
- save_err = Last_Error++;
- slerr = SLang_Error;
- SLang_Error = 0;
- inner_interp (err_block->b.blk);
-
- if (Last_Error <= save_err)
- {
- /* Caught error and cleared it */
- Last_Error = save_err;
- if ((Lang_Break_Condition == 0)
- /* An error may have cleared the error and then caused the
- * function to return. We will allow that but let's not allow
- * 'break' nor 'continue' statements until later.
- */
- || Lang_Return)
- return 0;
-
- /* drop--- either a break or continue was called */
- }
-
- Last_Error = save_err;
- SLang_Error = slerr;
-
- return_error:
-#if _SLANG_HAS_DEBUG_CODE
- while (addr >= addr_start)
- {
- if (addr->bc_main_type == _SLANG_BC_LINE_NUM)
- {
- char buf[256];
- sprintf (buf, "(Error occurred on line %lu)", addr->b.l_blk);
- do_traceback (buf, 0, NULL);
- break;
- }
- /* Special hack for 16 bit systems to prevent pointer wrapping. */
-#if defined(__16_BIT_SYSTEM__)
- if (addr == addr_start)
- break;
-#endif
- addr--;
- }
-#endif
- return -1;
-}
-
-
-#define GATHER_STATISTICS 0
-#if GATHER_STATISTICS
-static unsigned int Bytecodes[0xFFFF];
-
-static void print_stats (void)
-{
- unsigned int i;
- unsigned long total;
- FILE *fp = fopen ("stats.txt", "w");
- if (fp == NULL)
- return;
-
- total = 0;
- for (i = 0; i < 0xFFFF; i++)
- total += Bytecodes[i];
-
- if (total == 0)
- total = 1;
-
- for (i = 0; i < 0xFFFF; i++)
- {
- if (Bytecodes[i])
- fprintf (fp, "0x%04X %9u %e\n", i, Bytecodes[i], Bytecodes[i]/(double) total);
- }
- fclose (fp);
-}
-
-static void add_to_statistics (SLBlock_Type *b)
-{
- unsigned short x, y;
-
- x = b->bc_main_type;
- if (x == 0)
- {
- Bytecodes[0] += 1;
- return;
- }
- b++;
- y = b->bc_main_type;
-
- Bytecodes[(x << 8) | y] += 1;
-}
-
-#endif
-
-/* inner interpreter */
-/* The return value from this function is only meaningful when it is used
- * to process blocks for the switch statement. If it returns 0, the calling
- * routine should pass the next block to it. Otherwise it will
- * return non-zero, with or without error.
- */
-static int inner_interp (SLBlock_Type *addr_start)
-{
- SLBlock_Type *block, *err_block, *addr;
-#if GATHER_STATISTICS
- static int inited = 0;
-
- if (inited == 0)
- {
- (void) SLang_add_cleanup_function (print_stats);
- inited = 1;
- }
-#endif
-
- /* for systems that have no real interrupt facility (e.g. go32 on dos) */
- if (SLang_Interrupt != NULL) (*SLang_Interrupt)();
-
- block = err_block = NULL;
- addr = addr_start;
-
-#if GATHER_STATISTICS
- add_to_statistics (addr);
-#endif
- while (1)
- {
- switch (addr->bc_main_type)
- {
- case 0:
- return 1;
- case _SLANG_BC_LVARIABLE:
- push_local_variable (addr->b.i_blk);
- break;
- case _SLANG_BC_GVARIABLE:
- if (-1 == _SLpush_slang_obj (&addr->b.nt_gvar_blk->obj))
- do_name_type_error (addr->b.nt_blk);
- break;
-
- case _SLANG_BC_IVARIABLE:
- case _SLANG_BC_RVARIABLE:
- push_intrinsic_variable (addr->b.nt_ivar_blk);
- break;
-
- case _SLANG_BC_INTRINSIC:
- execute_intrinsic_fun (addr->b.nt_ifun_blk);
- if (SLang_Error)
- do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
- break;
-
- case _SLANG_BC_FUNCTION:
- execute_slang_fun (addr->b.nt_fun_blk);
- if (Lang_Break_Condition) goto handle_break_condition;
- break;
-
- case _SLANG_BC_MATH_UNARY:
- case _SLANG_BC_APP_UNARY:
- /* Make sure we treat these like function calls since the
- * parser took sin(x) to be a function call.
- */
- if (0 == _SL_increment_frame_pointer ())
- {
- do_app_unary (addr->b.nt_unary_blk);
- (void) _SL_decrement_frame_pointer ();
- }
- break;
-
- case _SLANG_BC_ICONST:
- SLclass_push_int_obj (SLANG_INT_TYPE, addr->b.iconst_blk->i);
- break;
-
-#if SLANG_HAS_FLOAT
- case _SLANG_BC_DCONST:
- SLang_push_double (addr->b.dconst_blk->d);
- break;
-#endif
-
- case _SLANG_BC_PVARIABLE:
- if (-1 == _SLpush_slang_obj (&addr->b.nt_gvar_blk->obj))
- do_name_type_error (addr->b.nt_blk);
- break;
-
- case _SLANG_BC_PFUNCTION:
- execute_slang_fun (addr->b.nt_fun_blk);
- if (Lang_Break_Condition) goto handle_break_condition;
- break;
-
- case _SLANG_BC_BINARY:
- do_binary (addr->b.i_blk);
- break;
-
- case _SLANG_BC_LITERAL:
-#if !_SLANG_OPTIMIZE_FOR_SPEED
- case _SLANG_BC_LITERAL_INT:
- case _SLANG_BC_LITERAL_STR:
-#endif
- {
- SLang_Class_Type *cl = _SLclass_get_class (addr->bc_sub_type);
- (*cl->cl_push_literal) (addr->bc_sub_type, (VOID_STAR) &addr->b.ptr_blk);
- }
- break;
-#if _SLANG_OPTIMIZE_FOR_SPEED
- case _SLANG_BC_LITERAL_INT:
- SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk);
- break;
-
- case _SLANG_BC_LITERAL_STR:
- _SLang_dup_and_push_slstring (addr->b.s_blk);
- break;
-#endif
- case _SLANG_BC_BLOCK:
- switch (addr->bc_sub_type)
- {
- case _SLANG_BCST_ERROR_BLOCK:
- err_block = addr;
- break;
-
- case _SLANG_BCST_EXIT_BLOCK:
- Exit_Block_Ptr = addr->b.blk;
- break;
-
- case _SLANG_BCST_USER_BLOCK0:
- case _SLANG_BCST_USER_BLOCK1:
- case _SLANG_BCST_USER_BLOCK2:
- case _SLANG_BCST_USER_BLOCK3:
- case _SLANG_BCST_USER_BLOCK4:
- User_Block_Ptr[addr->bc_sub_type - _SLANG_BCST_USER_BLOCK0] = addr->b.blk;
- break;
-
- case _SLANG_BCST_LOOP:
- case _SLANG_BCST_WHILE:
- case _SLANG_BCST_FOR:
- case _SLANG_BCST_FOREVER:
- case _SLANG_BCST_CFOR:
- case _SLANG_BCST_DOWHILE:
- case _SLANG_BCST_FOREACH:
- if (block == NULL) block = addr;
- lang_do_loops(addr->bc_sub_type, block, 1 + (unsigned int) (addr - block));
- block = NULL;
- break;
-
- case _SLANG_BCST_IFNOT:
-#if _SLANG_OPTIMIZE_FOR_SPEED
- {
- int i;
-
- if ((0 == pop_ctrl_integer (&i)) && (i == 0))
- inner_interp (addr->b.blk);
- }
-#else
- do_else_if (addr, NULL);
-#endif
- break;
-
- case _SLANG_BCST_IF:
-#if _SLANG_OPTIMIZE_FOR_SPEED
- {
- int i;
-
- if ((0 == pop_ctrl_integer (&i)) && i)
- inner_interp (addr->b.blk);
- }
-#else
- do_else_if (NULL, addr);
-#endif
- break;
-
- case _SLANG_BCST_NOTELSE:
- do_else_if (block, addr);
- block = NULL;
- break;
-
- case _SLANG_BCST_ELSE:
- do_else_if (addr, block);
- block = NULL;
- break;
-
- case _SLANG_BCST_SWITCH:
- if (Switch_Obj_Ptr == Switch_Obj_Max)
- {
- SLang_doerror("switch nesting too deep");
- break;
- }
- (void) SLang_pop (Switch_Obj_Ptr);
- Switch_Obj_Ptr++;
-
- if (block == NULL) block = addr;
- while ((SLang_Error == 0)
- && (block <= addr)
- && (Lang_Break_Condition == 0)
- && (0 == inner_interp (block->b.blk)))
- block++;
- Switch_Obj_Ptr--;
- SLang_free_object (Switch_Obj_Ptr);
- Switch_Obj_Ptr->data_type = 0;
- block = NULL;
- break;
-
- case _SLANG_BCST_ANDELSE:
- case _SLANG_BCST_ORELSE:
- if (block == NULL) block = addr;
- lang_do_and_orelse (addr->bc_sub_type, block, addr);
- block = NULL;
- break;
-
- default:
- if (block == NULL) block = addr;
- break;
- }
- if (Lang_Break_Condition) goto handle_break_condition;
- break;
-
- case _SLANG_BC_RETURN:
- Lang_Break_Condition = Lang_Return = Lang_Break = 1; return 1;
- case _SLANG_BC_BREAK:
- Lang_Break_Condition = Lang_Break = 1; return 1;
- case _SLANG_BC_CONTINUE:
- Lang_Break_Condition = /* Lang_Continue = */ 1; return 1;
-
- case _SLANG_BC_EXCH:
- (void) SLreverse_stack (2);
- break;
-
- case _SLANG_BC_LABEL:
- {
- int test;
- if ((0 == SLang_pop_integer (&test))
- && (test == 0))
- return 0;
- }
- break;
-
- case _SLANG_BC_LOBJPTR:
- (void)_SLang_push_ref (0, (VOID_STAR)(Local_Variable_Frame - addr->b.i_blk));
- break;
-
- case _SLANG_BC_GOBJPTR:
- (void)_SLang_push_ref (1, (VOID_STAR)addr->b.nt_blk);
- break;
-
- case _SLANG_BC_X_ERROR:
- if (err_block != NULL)
- {
- inner_interp(err_block->b.blk);
- if (SLang_Error) err_block = NULL;
- }
- else SLang_verror(SL_SYNTAX_ERROR, "No ERROR_BLOCK");
- if (Lang_Break_Condition) goto handle_break_condition;
- break;
-
- case _SLANG_BC_X_USER0:
- case _SLANG_BC_X_USER1:
- case _SLANG_BC_X_USER2:
- case _SLANG_BC_X_USER3:
- case _SLANG_BC_X_USER4:
- if (User_Block_Ptr[addr->bc_main_type - _SLANG_BC_X_USER0] != NULL)
- {
- inner_interp(User_Block_Ptr[addr->bc_main_type - _SLANG_BC_X_USER0]);
- }
- else SLang_verror(SL_SYNTAX_ERROR, "No block for X_USERBLOCK");
- if (Lang_Break_Condition) goto handle_break_condition;
- break;
-
- case _SLANG_BC_CALL_DIRECT:
- (*addr->b.call_function) ();
- break;
-
- case _SLANG_BC_CALL_DIRECT_FRAME:
- do_bc_call_direct_frame (addr->b.call_function);
- break;
-
- case _SLANG_BC_UNARY:
- do_unary (addr->b.i_blk, _SLANG_BC_UNARY);
- break;
-
- case _SLANG_BC_UNARY_FUNC:
- /* Make sure we treat these like function calls since the
- * parser took abs(x) to be a function call.
- */
- if (0 == _SL_increment_frame_pointer ())
- {
- do_unary (addr->b.i_blk, _SLANG_BC_UNARY);
- (void) _SL_decrement_frame_pointer ();
- }
- break;
-
- case _SLANG_BC_DEREF_ASSIGN:
- set_deref_lvalue (addr);
- break;
- case _SLANG_BC_SET_LOCAL_LVALUE:
- set_lvalue_obj (addr->bc_sub_type, Local_Variable_Frame - addr->b.i_blk);
- break;
- case _SLANG_BC_SET_GLOBAL_LVALUE:
- if (-1 == set_lvalue_obj (addr->bc_sub_type, &addr->b.nt_gvar_blk->obj))
- do_name_type_error (addr->b.nt_blk);
- break;
- case _SLANG_BC_SET_INTRIN_LVALUE:
- set_intrin_lvalue (addr);
- break;
- case _SLANG_BC_SET_STRUCT_LVALUE:
- set_struct_lvalue (addr);
- break;
-
- case _SLANG_BC_FIELD:
- (void) push_struct_field (addr->b.s_blk);
- break;
-
- case _SLANG_BC_SET_ARRAY_LVALUE:
- set_array_lvalue (addr->bc_sub_type);
- break;
-
-#if _SLANG_HAS_DEBUG_CODE
- case _SLANG_BC_LINE_NUM:
- break;
-#endif
-
- case _SLANG_BC_TMP:
- tmp_variable_function (addr);
- break;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- case _SLANG_BC_LVARIABLE_AGET:
- if (0 == push_local_variable (addr->b.i_blk))
- do_bc_call_direct_frame (_SLarray_aget);
- break;
-
- case _SLANG_BC_LVARIABLE_APUT:
- if (0 == push_local_variable (addr->b.i_blk))
- do_bc_call_direct_frame (_SLarray_aput);
- break;
- case _SLANG_BC_INTEGER_PLUS:
- if (0 == SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk))
- do_binary (SLANG_PLUS);
- break;
-
- case _SLANG_BC_INTEGER_MINUS:
- if (0 == SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk))
- do_binary (SLANG_MINUS);
- break;
-#endif
-#if 0
- case _SLANG_BC_ARG_LVARIABLE:
- (void) SLang_start_arg_list ();
- push_local_variable (addr->b.i_blk);
- break;
-#endif
- case _SLANG_BC_EARG_LVARIABLE:
- push_local_variable (addr->b.i_blk);
- (void) SLang_end_arg_list ();
- break;
-
-#if USE_COMBINED_BYTECODES
- case _SLANG_BC_CALL_DIRECT_INTRINSIC:
- (*addr->b.call_function) ();
- addr++;
- execute_intrinsic_fun (addr->b.nt_ifun_blk);
- if (SLang_Error)
- do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
- break;
-
- case _SLANG_BC_INTRINSIC_CALL_DIRECT:
- execute_intrinsic_fun (addr->b.nt_ifun_blk);
- if (SLang_Error)
- {
- do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
- break;
- }
- addr++;
- (*addr->b.call_function) ();
- break;
-
- case _SLANG_BC_CALL_DIRECT_LSTR:
- (*addr->b.call_function) ();
- addr++;
- _SLang_dup_and_push_slstring (addr->b.s_blk);
- break;
-
- case _SLANG_BC_CALL_DIRECT_SLFUN:
- (*addr->b.call_function) ();
- addr++;
- execute_slang_fun (addr->b.nt_fun_blk);
- if (Lang_Break_Condition) goto handle_break_condition;
- break;
-
- case _SLANG_BC_CALL_DIRECT_INTRSTOP:
- (*addr->b.call_function) ();
- addr++;
- /* drop */
- case _SLANG_BC_INTRINSIC_STOP:
- execute_intrinsic_fun (addr->b.nt_ifun_blk);
- if (SLang_Error == 0)
- return 1;
- do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
- break;
-
- case _SLANG_BC_CALL_DIRECT_EARG_LVAR:
- (*addr->b.call_function) ();
- addr++;
- push_local_variable (addr->b.i_blk);
- (void) SLang_end_arg_list ();
- break;
-
- case _SLANG_BC_CALL_DIRECT_LINT:
- (*addr->b.call_function) ();
- addr++;
- SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk);
- break;
-
- case _SLANG_BC_CALL_DIRECT_LVAR:
- (*addr->b.call_function) ();
- addr++;
- push_local_variable (addr->b.i_blk);
- break;
-#endif /* USE_COMBINED_BYTECODES */
-
- default:
- SLang_verror (SL_INTERNAL_ERROR, "Byte-Code 0x%X is not valid", addr->bc_main_type);
- }
-
- /* Someday I plan to add a 'signal' intrinsic function. Then when a
- * signal is caught, a variable will be set to one and that value of
- * that variable will need to be monitored here, e.g.,
- * if (Handle_Signal) handle_signal ();
- * It would be nice to check only one variable instead of Handle_Signal
- * and SLang_Error. Perhaps I should phase out SLang_Error = xxx
- * and used something like: SLang_set_error (code); Then, I could
- * use:
- * if (Handle_Condition)
- * {
- * Handle_Condition = 0;
- * if (SLang_Error) ....
- * else if (Handle_Signal) handle_signal ();
- * else....
- * }
- */
- if (SLang_Error)
- {
- if (-1 == do_inner_interp_error (err_block, addr_start, addr))
- return 1;
- if (SLang_Error)
- return 1;
-
- /* Otherwise, error cleared. Continue onto next bytecode.
- * Someday I need to add something to indicate where the
- * next statement begins since continuing on the next
- * bytecode is not really what is desired.
- */
- if (Lang_Break_Condition) goto handle_break_condition;
- }
- addr++;
- }
-
- handle_break_condition:
- /* Get here if Lang_Break_Condition != 0, which implies that either
- * Lang_Return, Lang_Break, or Lang_Continue is non zero
- */
- if (Lang_Return)
- Lang_Break = 1;
-
- return 1;
-}
-
-/*}}}*/
-
-/* The functions below this point are used to implement the parsed token
- * to byte-compiled code.
- */
-/* static SLang_Name_Type **Static_Hash_Table; */
-
-static SLang_Name_Type **Locals_Hash_Table;
-static int Local_Variable_Number;
-static unsigned int Function_Args_Number;
-int _SLang_Auto_Declare_Globals = 0;
-int (*SLang_Auto_Declare_Var_Hook) (char *);
-
-static SLang_NameSpace_Type *This_Static_NameSpace;
-static SLang_NameSpace_Type *Global_NameSpace;
-
-#if _SLANG_HAS_DEBUG_CODE
-static char *This_Compile_Filename;
-#endif
-static SLBlock_Type SLShort_Blocks[6];
-/* These are initialized in add_table below. I cannot init a Union!! */
-
-static int Lang_Defining_Function;
-static void (*Default_Variable_Mode) (_SLang_Token_Type *);
-static void (*Default_Define_Function) (char *, unsigned long);
-
-static int push_compile_context (char *);
-static int pop_compile_context (void);
-
-typedef struct
-{
- int block_type;
- SLBlock_Type *block; /* beginning of block definition */
- SLBlock_Type *block_ptr; /* current location */
- SLBlock_Type *block_max; /* end of definition */
- SLang_NameSpace_Type *static_namespace;
-}
-Block_Context_Type;
-
-static Block_Context_Type Block_Context_Stack [SLANG_MAX_BLOCK_STACK_LEN];
-static unsigned int Block_Context_Stack_Len;
-
-static SLBlock_Type *Compile_ByteCode_Ptr;
-static SLBlock_Type *This_Compile_Block;
-static SLBlock_Type *This_Compile_Block_Max;
-static int This_Compile_Block_Type;
-#define COMPILE_BLOCK_TYPE_FUNCTION 1
-#define COMPILE_BLOCK_TYPE_BLOCK 2
-#define COMPILE_BLOCK_TYPE_TOP_LEVEL 3
-
-/* If it returns 0, DO NOT FREE p */
-static int lang_free_branch (SLBlock_Type *p)
-{
- /* Note: we look at 0,2,4, since these blocks are 0 terminated */
- if ((p == SLShort_Blocks)
- || (p == SLShort_Blocks + 2)
- || (p == SLShort_Blocks + 4)
- )
- return 0;
-
- while (1)
- {
- SLang_Class_Type *cl;
-
- switch (p->bc_main_type)
- {
- case _SLANG_BC_BLOCK:
- if (lang_free_branch(p->b.blk))
- SLfree((char *)p->b.blk);
- break;
-
- case _SLANG_BC_LITERAL:
- case _SLANG_BC_LITERAL_STR:
- /* No user types should be here. */
- cl = _SLclass_get_class (p->bc_sub_type);
- (*cl->cl_byte_code_destroy) (p->bc_sub_type, (VOID_STAR) &p->b.ptr_blk);
- break;
-
- case _SLANG_BC_FIELD:
- case _SLANG_BC_SET_STRUCT_LVALUE:
- SLang_free_slstring (p->b.s_blk);
- break;
-
- default:
- break;
-
- case 0:
- return 1;
- }
- p++;
- }
-}
-
-static void free_function_header (_SLBlock_Header_Type *h)
-{
- if (h->num_refs > 1)
- {
- h->num_refs--;
- return;
- }
-
- if (h->body != NULL)
- {
- if (lang_free_branch (h->body))
- SLfree ((char *) h->body);
- }
-
- SLfree ((char *) h);
-}
-
-static int push_block_context (int type)
-{
- Block_Context_Type *c;
- unsigned int num;
- SLBlock_Type *b;
-
- if (Block_Context_Stack_Len == SLANG_MAX_BLOCK_STACK_LEN)
- {
- SLang_verror (SL_STACK_OVERFLOW, "Block stack overflow");
- return -1;
- }
-
- num = 5; /* 40 bytes */
- if (NULL == (b = (SLBlock_Type *) SLcalloc (num, sizeof (SLBlock_Type))))
- return -1;
-
- c = Block_Context_Stack + Block_Context_Stack_Len;
- c->block = This_Compile_Block;
- c->block_ptr = Compile_ByteCode_Ptr;
- c->block_max = This_Compile_Block_Max;
- c->block_type = This_Compile_Block_Type;
- c->static_namespace = This_Static_NameSpace;
-
- Compile_ByteCode_Ptr = This_Compile_Block = b;
- This_Compile_Block_Max = b + num;
- This_Compile_Block_Type = type;
-
- Block_Context_Stack_Len += 1;
- return 0;
-}
-
-static int pop_block_context (void)
-{
- Block_Context_Type *c;
-
- if (Block_Context_Stack_Len == 0)
- return -1;
-
- Block_Context_Stack_Len -= 1;
- c = Block_Context_Stack + Block_Context_Stack_Len;
-
- This_Compile_Block = c->block;
- This_Compile_Block_Max = c->block_max;
- This_Compile_Block_Type = c->block_type;
- Compile_ByteCode_Ptr = c->block_ptr;
- This_Static_NameSpace = c->static_namespace;
-
- return 0;
-}
-
-int _SLcompile_push_context (SLang_Load_Type *load_object)
-{
- if (-1 == push_compile_context (load_object->name))
- return -1;
-
- if (NULL == (This_Static_NameSpace = _SLns_allocate_namespace (load_object->name, SLSTATIC_HASH_TABLE_SIZE)))
- {
- pop_compile_context ();
- return -1;
- }
-
- if (-1 == push_block_context (COMPILE_BLOCK_TYPE_TOP_LEVEL))
- {
- pop_compile_context ();
- return -1;
- }
-
- return 0;
-}
-
-int _SLcompile_pop_context (void)
-{
- if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_TOP_LEVEL)
- {
- Compile_ByteCode_Ptr->bc_main_type = 0;
- if (lang_free_branch (This_Compile_Block))
- SLfree ((char *) This_Compile_Block);
- }
-
- (void) pop_block_context ();
- (void) pop_compile_context ();
-
- if (This_Compile_Block == NULL)
- return 0;
-
-#if 0
- if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
- {
- SLang_verror (SL_INTERNAL_ERROR, "Not at top-level");
- return -1;
- }
-#endif
-
- return 0;
-}
-
-/*{{{ Hash and Name Table Functions */
-
-static SLang_Name_Type *locate_name_in_table (char *name, unsigned long hash,
- SLang_Name_Type **table, unsigned int table_size)
-{
- SLang_Name_Type *t;
- char ch;
-
- t = table [(unsigned int) (hash % table_size)];
- ch = *name++;
-
- while (t != NULL)
- {
- if ((ch == t->name[0])
- && (0 == strcmp (t->name + 1, name)))
- break;
-
- t = t->next;
- }
-
- return t;
-}
-
-static SLang_Name_Type *locate_namespace_encoded_name (char *name, int err_on_bad_ns)
-{
- char *ns, *ns1;
- SLang_NameSpace_Type *table;
- SLang_Name_Type *nt;
-
- ns = name;
- name = strchr (name, '-');
- if ((name == NULL) || (name [1] != '>'))
- name = ns;
-
- ns1 = SLang_create_nslstring (ns, (unsigned int) (name - ns));
- if (ns1 == NULL)
- return NULL;
- if (ns != name)
- name += 2;
- ns = ns1;
-
- if (*ns == 0)
- {
- /* Use Global Namespace */
- SLang_free_slstring (ns);
- return locate_name_in_table (name, _SLcompute_string_hash (name),
- Global_NameSpace->table, Global_NameSpace->table_size);
- }
-
- if (NULL == (table = _SLns_find_namespace (ns)))
- {
- if (err_on_bad_ns)
- SLang_verror (SL_SYNTAX_ERROR, "Unable to find namespace called %s", ns);
- SLang_free_slstring (ns);
- return NULL;
- }
- SLang_free_slstring (ns);
-
- /* FIXME: the hash table size should be stored in the hash table itself */
- nt = locate_name_in_table (name, _SLcompute_string_hash (name),
- table->table, table->table_size);
- if (nt == NULL)
- return NULL;
-
- switch (nt->name_type)
- {
- /* These are private and cannot be accessed through the namespace. */
- case SLANG_PVARIABLE:
- case SLANG_PFUNCTION:
- return NULL;
- }
- return nt;
-}
-
-static SLang_Name_Type *locate_hashed_name (char *name, unsigned long hash)
-{
- SLang_Name_Type *t;
-
- if (Lang_Defining_Function)
- {
- t = locate_name_in_table (name, hash, Locals_Hash_Table, SLLOCALS_HASH_TABLE_SIZE);
- if (t != NULL)
- return t;
- }
-
- if ((This_Static_NameSpace != NULL)
- && (NULL != (t = locate_name_in_table (name, hash, This_Static_NameSpace->table, This_Static_NameSpace->table_size))))
- return t;
-
- t = locate_name_in_table (name, hash, Global_NameSpace->table, Global_NameSpace->table_size);
- if (NULL != t)
- return t;
-
- return locate_namespace_encoded_name (name, 1);
-}
-
-SLang_Name_Type *_SLlocate_name (char *name)
-{
- return locate_hashed_name (name, _SLcompute_string_hash (name));
-}
-
-static SLang_Name_Type *
-add_name_to_hash_table (char *name, unsigned long hash,
- unsigned int sizeof_obj, unsigned char name_type,
- SLang_Name_Type **table, unsigned int table_size,
- int check_existing)
-{
- SLang_Name_Type *t;
-
- if (check_existing)
- {
- t = locate_name_in_table (name, hash, table, table_size);
- if (t != NULL)
- return t;
- }
-
- if (-1 == _SLcheck_identifier_syntax (name))
- return NULL;
-
- t = (SLang_Name_Type *) SLmalloc (sizeof_obj);
- if (t == NULL)
- return t;
-
- memset ((char *) t, 0, sizeof_obj);
- if (NULL == (t->name = _SLstring_dup_hashed_string (name, hash)))
- {
- SLfree ((char *) t);
- return NULL;
- }
- t->name_type = name_type;
-
- hash = hash % table_size;
- t->next = table [(unsigned int)hash];
- table [(unsigned int) hash] = t;
-
- return t;
-}
-
-static SLang_Name_Type *
-add_global_name (char *name, unsigned long hash,
- unsigned char name_type, unsigned int sizeof_obj,
- SLang_NameSpace_Type *ns)
-{
- SLang_Name_Type *nt;
- SLang_Name_Type **table;
- unsigned int table_size;
-
- table = ns->table;
- table_size = ns->table_size;
-
- nt = locate_name_in_table (name, hash, table, table_size);
- if (nt != NULL)
- {
- if (nt->name_type == name_type)
- return nt;
-
- SLang_verror (SL_DUPLICATE_DEFINITION, "%s cannot be re-defined", name);
- return NULL;
- }
-
- return add_name_to_hash_table (name, hash, sizeof_obj, name_type,
- table, table_size, 0);
-}
-
-static int add_intrinsic_function (SLang_NameSpace_Type *ns,
- char *name, FVOID_STAR addr, unsigned char ret_type,
- unsigned int nargs, va_list ap)
-{
- SLang_Intrin_Fun_Type *f;
- unsigned int i;
-
- if (-1 == init_interpreter ())
- return -1;
-
- if (ns == NULL) ns = Global_NameSpace;
-
- if (nargs > SLANG_MAX_INTRIN_ARGS)
- {
- SLang_verror (SL_APPLICATION_ERROR, "Function %s requires too many arguments", name);
- return -1;
- }
-
- if (ret_type == SLANG_FLOAT_TYPE)
- {
- SLang_verror (SL_NOT_IMPLEMENTED, "Function %s is not permitted to return float", name);
- return -1;
- }
-
- f = (SLang_Intrin_Fun_Type *) add_global_name (name, _SLcompute_string_hash (name),
- SLANG_INTRINSIC, sizeof (SLang_Intrin_Fun_Type),
- ns);
-
- if (f == NULL)
- return -1;
-
- f->i_fun = addr;
- f->num_args = nargs;
- f->return_type = ret_type;
-
- for (i = 0; i < nargs; i++)
- f->arg_types [i] = va_arg (ap, unsigned int);
-
- return 0;
-}
-
-int SLadd_intrinsic_function (char *name, FVOID_STAR addr, unsigned char ret_type,
- unsigned int nargs, ...)
-{
- va_list ap;
- int status;
-
- va_start (ap, nargs);
- status = add_intrinsic_function (NULL, name, addr, ret_type, nargs, ap);
- va_end (ap);
-
- return status;
-}
-
-int SLns_add_intrinsic_function (SLang_NameSpace_Type *ns,
- char *name, FVOID_STAR addr, unsigned char ret_type,
- unsigned int nargs, ...)
-{
- va_list ap;
- int status;
-
- va_start (ap, nargs);
- status = add_intrinsic_function (ns, name, addr, ret_type, nargs, ap);
- va_end (ap);
-
- return status;
-}
-
-int SLns_add_intrinsic_variable (SLang_NameSpace_Type *ns,
- char *name, VOID_STAR addr, unsigned char data_type, int ro)
-{
- SLang_Intrin_Var_Type *v;
-
- if (-1 == init_interpreter ())
- return -1;
-
- if (ns == NULL) ns = Global_NameSpace;
-
- v = (SLang_Intrin_Var_Type *)add_global_name (name,
- _SLcompute_string_hash (name),
- (ro ? SLANG_RVARIABLE : SLANG_IVARIABLE),
- sizeof (SLang_Intrin_Var_Type),
- ns);
- if (v == NULL)
- return -1;
-
- v->addr = addr;
- v->type = data_type;
- return 0;
-}
-
-int SLadd_intrinsic_variable (char *name, VOID_STAR addr, unsigned char data_type, int ro)
-{
- return SLns_add_intrinsic_variable (NULL, name, addr, data_type, ro);
-}
-
-static int
-add_slang_function (char *name, unsigned char type, unsigned long hash,
- unsigned int num_args, unsigned int num_locals,
-#if _SLANG_HAS_DEBUG_CODE
- char *file,
-#endif
- _SLBlock_Header_Type *h,
- SLang_NameSpace_Type *ns)
-{
- _SLang_Function_Type *f;
-
-#if _SLANG_HAS_DEBUG_CODE
- if ((file != NULL)
- && (NULL == (file = SLang_create_slstring (file))))
- return -1;
-#endif
-
- f = (_SLang_Function_Type *)add_global_name (name, hash,
- type,
- sizeof (_SLang_Function_Type),
- ns);
- if (f == NULL)
- {
-#if _SLANG_HAS_DEBUG_CODE
- SLang_free_slstring (file); /* NULL ok */
-#endif
- return -1;
- }
-
- if (f->v.header != NULL)
- {
- if (f->nlocals == AUTOLOAD_NUM_LOCALS)
- SLang_free_slstring ((char *)f->v.autoload_filename); /* autoloaded filename */
- else
- free_function_header (f->v.header);
- }
-
-#if _SLANG_HAS_DEBUG_CODE
- if (f->file != NULL) SLang_free_slstring (f->file);
- f->file = file;
-#endif
- f->v.header = h;
- f->nlocals = num_locals;
- f->nargs = num_args;
-
- return 0;
-}
-
-int SLang_autoload (char *name, char *file)
-{
- _SLang_Function_Type *f;
- unsigned long hash;
-
- hash = _SLcompute_string_hash (name);
- f = (_SLang_Function_Type *)locate_name_in_table (name, hash, Global_NameSpace->table, Global_NameSpace->table_size);
-
- if ((f != NULL)
- && (f->name_type == SLANG_FUNCTION)
- && (f->v.header != NULL)
- && (f->nlocals != AUTOLOAD_NUM_LOCALS))
- {
- /* already loaded */
- return 0;
- }
-
- file = SLang_create_slstring (file);
- if (-1 == add_slang_function (name, SLANG_FUNCTION, hash, 0, AUTOLOAD_NUM_LOCALS,
-#if _SLANG_HAS_DEBUG_CODE
- file,
-#endif
- (_SLBlock_Header_Type *) file,
- Global_NameSpace))
- {
- SLang_free_slstring (file);
- return -1;
- }
-
- return 0;
-}
-
-SLang_Name_Type *_SLlocate_global_name (char *name)
-{
- unsigned long hash;
-
- hash = _SLcompute_string_hash (name);
- return locate_name_in_table (name, hash, Global_NameSpace->table,
- Global_NameSpace->table_size);
-}
-
-/*}}}*/
-
-static void free_local_variable_table (void)
-{
- unsigned int i;
- SLang_Name_Type *t, *t1;
-
- for (i = 0; i < SLLOCALS_HASH_TABLE_SIZE; i++)
- {
- t = Locals_Hash_Table [i];
- while (t != NULL)
- {
- SLang_free_slstring (t->name);
- t1 = t->next;
- SLfree ((char *) t);
- t = t1;
- }
- Locals_Hash_Table [i] = NULL;
- }
- Local_Variable_Number = 0;
-}
-
-/* call inner interpreter or return for more */
-static void lang_try_now(void)
-{
- Compile_ByteCode_Ptr++;
- if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
- return;
-
- Compile_ByteCode_Ptr->bc_main_type = 0; /* so next command stops after this */
-
- /* now do it */
- inner_interp (This_Compile_Block);
- (void) lang_free_branch (This_Compile_Block);
- Compile_ByteCode_Ptr = This_Compile_Block;
-}
-
-SLang_Name_Type *SLang_get_fun_from_ref (SLang_Ref_Type *ref)
-{
- if (ref->is_global)
- {
- SLang_Name_Type *nt = ref->v.nt;
-
- switch (nt->name_type)
- {
- case SLANG_PFUNCTION:
- case SLANG_FUNCTION:
- case SLANG_INTRINSIC:
- case SLANG_MATH_UNARY:
- case SLANG_APP_UNARY:
- return nt;
- }
- SLang_verror (SL_TYPE_MISMATCH,
- "Reference to a function expected. Found &%s",
- nt->name);
- }
-
- SLang_verror (SL_TYPE_MISMATCH,
- "Reference to a function expected");
- return NULL;
-}
-
-int SLexecute_function (SLang_Name_Type *nt)
-{
- unsigned char type;
- char *name;
-
- if (SLang_Error)
- return -1;
-
- type = nt->name_type;
- name = nt->name;
-
- switch (type)
- {
- case SLANG_PFUNCTION:
- case SLANG_FUNCTION:
- execute_slang_fun ((_SLang_Function_Type *) nt);
- break;
-
- case SLANG_INTRINSIC:
- execute_intrinsic_fun ((SLang_Intrin_Fun_Type *) nt);
- break;
-
- case SLANG_MATH_UNARY:
- case SLANG_APP_UNARY:
- inner_interp_nametype (nt);
- break;
-
- default:
- SLang_verror (SL_TYPE_MISMATCH, "%s is not a function", name);
- return -1;
- }
-
- if (SLang_Error)
- {
- SLang_verror (SLang_Error, "Error while executing %s", name);
- return -1;
- }
-
- return 1;
-}
-
-int SLang_execute_function (char *name)
-{
- SLang_Name_Type *entry;
-
- if (NULL == (entry = SLang_get_function (name)))
- return 0;
-
- return SLexecute_function (entry);
-}
-
-/* return S-Lang function or NULL */
-SLang_Name_Type *SLang_get_function (char *name)
-{
- SLang_Name_Type *entry;
-
- if (NULL == (entry = locate_namespace_encoded_name (name, 0)))
- return NULL;
-
- if ((entry->name_type == SLANG_FUNCTION)
- || (entry->name_type == SLANG_INTRINSIC))
- return entry;
-
- return NULL;
-}
-
-static void lang_begin_function (void)
-{
- if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
- {
- SLang_verror (SL_SYNTAX_ERROR, "Function nesting is illegal");
- return;
- }
- Lang_Defining_Function = 1;
- (void) push_block_context (COMPILE_BLOCK_TYPE_FUNCTION);
-}
-
-#if USE_COMBINED_BYTECODES
-static void optimize_block (SLBlock_Type *b)
-{
- while (1)
- {
- switch (b->bc_main_type)
- {
- case 0:
- return;
-
- default:
- b++;
- break;
-
- case _SLANG_BC_CALL_DIRECT:
- b++;
- switch (b->bc_main_type)
- {
- case 0:
- return;
- case _SLANG_BC_INTRINSIC:
- if ((b+1)->bc_main_type == 0)
- {
- (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_INTRSTOP;
- return;
- }
- (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_INTRINSIC;
- b++;
- break;
- case _SLANG_BC_LITERAL_STR:
- (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_LSTR;
- b++;
- break;
- case _SLANG_BC_FUNCTION:
- case _SLANG_BC_PFUNCTION:
- (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_SLFUN;
- b++;
- break;
- case _SLANG_BC_EARG_LVARIABLE:
- (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_EARG_LVAR;
- b++;
- break;
- case _SLANG_BC_LITERAL_INT:
- (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_LINT;
- b++;
- break;
- case _SLANG_BC_LVARIABLE:
- (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_LVAR;
- b++;
- break;
- }
- break;
-
- case _SLANG_BC_INTRINSIC:
- b++;
- switch (b->bc_main_type)
- {
- case _SLANG_BC_CALL_DIRECT:
- (b-1)->bc_main_type = _SLANG_BC_INTRINSIC_CALL_DIRECT;
- b++;
- break;
-#if 0
- case _SLANG_BC_BLOCK:
- (b-1)->bc_main_type = _SLANG_BC_INTRINSIC_BLOCK;
- b++;
- break;
-#endif
-
- case 0:
- (b-1)->bc_main_type = _SLANG_BC_INTRINSIC_STOP;
- return;
- }
- break;
- }
- }
-}
-
-#endif
-
-
-/* name will be NULL if the object is to simply terminate the function
- * definition. See SLang_restart.
- */
-static int lang_define_function (char *name, unsigned char type, unsigned long hash,
- SLang_NameSpace_Type *ns)
-{
- if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_FUNCTION)
- {
- SLang_verror (SL_SYNTAX_ERROR, "Premature end of function");
- return -1;
- }
-
- /* terminate function */
- Compile_ByteCode_Ptr->bc_main_type = 0;
-
- if (name != NULL)
- {
- _SLBlock_Header_Type *h;
-
- h = (_SLBlock_Header_Type *)SLmalloc (sizeof (_SLBlock_Header_Type));
- if (h != NULL)
- {
- h->num_refs = 1;
- h->body = This_Compile_Block;
-
-#if USE_COMBINED_BYTECODES
- optimize_block (h->body);
-#endif
-
- if (-1 == add_slang_function (name, type, hash,
- Function_Args_Number,
- Local_Variable_Number,
-#if _SLANG_HAS_DEBUG_CODE
- This_Compile_Filename,
-#endif
- h, ns))
- SLfree ((char *) h);
- }
- /* Drop through for clean-up */
- }
-
- free_local_variable_table ();
-
- Function_Args_Number = 0;
- Lang_Defining_Function = 0;
-
- if (SLang_Error) return -1;
- /* SLang_restart will finish this if there is a slang error. */
-
- pop_block_context ();
-
- /* A function is only defined at top-level */
- if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
- {
- SLang_verror (SL_INTERNAL_ERROR, "Not at top-level");
- return -1;
- }
- Compile_ByteCode_Ptr = This_Compile_Block;
- return 0;
-}
-
-static void define_static_function (char *name, unsigned long hash)
-{
- (void) lang_define_function (name, SLANG_FUNCTION, hash, This_Static_NameSpace);
-}
-
-static void define_private_function (char *name, unsigned long hash)
-{
- (void) lang_define_function (name, SLANG_PFUNCTION, hash, This_Static_NameSpace);
-}
-
-static void define_public_function (char *name, unsigned long hash)
-{
- (void) lang_define_function (name, SLANG_FUNCTION, hash, Global_NameSpace);
-}
-
-static void lang_end_block (void)
-{
- SLBlock_Type *node, *branch;
- unsigned char mtype;
-
- if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_BLOCK)
- {
- SLang_verror (SL_SYNTAX_ERROR, "Not defining a block");
- return;
- }
-
- /* terminate the block */
- Compile_ByteCode_Ptr->bc_main_type = 0;
- branch = This_Compile_Block;
-
- /* Try to save some space by using the cached blocks. */
- if (Compile_ByteCode_Ptr == branch + 1)
- {
- mtype = branch->bc_main_type;
- if (((mtype == _SLANG_BC_BREAK)
- || (mtype == _SLANG_BC_CONTINUE)
- || (mtype == _SLANG_BC_RETURN))
- && (SLang_Error == 0))
- {
- SLfree ((char *)branch);
- branch = SLShort_Blocks + 2 * (int) (mtype - _SLANG_BC_RETURN);
- }
- }
-
-#if USE_COMBINED_BYTECODES
- optimize_block (branch);
-#endif
-
- pop_block_context ();
- node = Compile_ByteCode_Ptr++;
-
- node->bc_main_type = _SLANG_BC_BLOCK;
- node->bc_sub_type = 0;
- node->b.blk = branch;
-}
-
-static int lang_begin_block (void)
-{
- return push_block_context (COMPILE_BLOCK_TYPE_BLOCK);
-}
-
-static int lang_check_space (void)
-{
- unsigned int n;
- SLBlock_Type *p;
-
- if (NULL == (p = This_Compile_Block))
- {
- SLang_verror (SL_INTERNAL_ERROR, "Top-level block not present");
- return -1;
- }
-
- /* Allow 1 extra for terminator */
- if (Compile_ByteCode_Ptr + 1 < This_Compile_Block_Max)
- return 0;
-
- n = (unsigned int) (This_Compile_Block_Max - p);
-
- /* enlarge the space by 2 objects */
- n += 2;
-
- if (NULL == (p = (SLBlock_Type *) SLrealloc((char *)p, n * sizeof(SLBlock_Type))))
- return -1;
-
- This_Compile_Block_Max = p + n;
- n = (unsigned int) (Compile_ByteCode_Ptr - This_Compile_Block);
- This_Compile_Block = p;
- Compile_ByteCode_Ptr = p + n;
-
- return 0;
-}
-
-/* returns positive number if name is a function or negative number if it
- is a variable. If it is intrinsic, it returns magnitude of 1, else 2 */
-int SLang_is_defined(char *name)
-{
- SLang_Name_Type *t;
-
- if (-1 == init_interpreter ())
- return -1;
-
- t = locate_namespace_encoded_name (name, 0);
- if (t == NULL)
- return 0;
-
- switch (t->name_type)
- {
- case SLANG_FUNCTION:
- /* case SLANG_PFUNCTION: */
- return 2;
- case SLANG_GVARIABLE:
- /* case SLANG_PVARIABLE: */
- return -2;
-
- case SLANG_ICONSTANT:
- case SLANG_DCONSTANT:
- case SLANG_RVARIABLE:
- case SLANG_IVARIABLE:
- return -1;
-
- case SLANG_INTRINSIC:
- default:
- return 1;
- }
-}
-
-static int add_global_variable (char *name, char name_type, unsigned long hash,
- SLang_NameSpace_Type *ns)
-{
- SLang_Name_Type *g;
-
- /* Note the importance of checking if it is already defined or not. For example,
- * suppose X is defined as an intrinsic variable. Then S-Lang code like:
- * !if (is_defined("X")) { variable X; }
- * will not result in a global variable X. On the other hand, this would
- * not be an issue if 'variable' statements always were not processed
- * immediately. That is, as it is now, 'if (0) {variable ZZZZ;}' will result
- * in the variable ZZZZ being defined because of the immediate processing.
- * The current solution is to do: if (0) { eval("variable ZZZZ;"); }
- */
- /* hash = _SLcompute_string_hash (name); */
- g = locate_name_in_table (name, hash, ns->table, ns->table_size);
-
- if (g != NULL)
- {
- if (g->name_type == name_type)
- return 0;
- }
-
- if (NULL == add_global_name (name, hash, name_type,
- sizeof (SLang_Global_Var_Type), ns))
- return -1;
-
- return 0;
-}
-
-int SLadd_global_variable (char *name)
-{
- if (-1 == init_interpreter ())
- return -1;
-
- return add_global_variable (name, SLANG_GVARIABLE,
- _SLcompute_string_hash (name),
- Global_NameSpace);
-}
-
-static int add_local_variable (char *name, unsigned long hash)
-{
- SLang_Local_Var_Type *t;
-
- /* local variable */
- if (Local_Variable_Number >= SLANG_MAX_LOCAL_VARIABLES)
- {
- SLang_verror (SL_SYNTAX_ERROR, "Too many local variables");
- return -1;
- }
-
- if (NULL != locate_name_in_table (name, hash, Locals_Hash_Table, SLLOCALS_HASH_TABLE_SIZE))
- {
- SLang_verror (SL_SYNTAX_ERROR, "Local variable %s has already been defined", name);
- return -1;
- }
-
- t = (SLang_Local_Var_Type *)
- add_name_to_hash_table (name, hash,
- sizeof (SLang_Local_Var_Type), SLANG_LVARIABLE,
- Locals_Hash_Table, SLLOCALS_HASH_TABLE_SIZE, 0);
- if (t == NULL)
- return -1;
-
- t->local_var_number = Local_Variable_Number;
- Local_Variable_Number++;
- return 0;
-}
-
-static void (*Compile_Mode_Function) (_SLang_Token_Type *);
-static void compile_basic_token_mode (_SLang_Token_Type *);
-
-/* if an error occurs, discard current object, block, function, etc... */
-void SLang_restart (int localv)
-{
- int save = SLang_Error;
-
- SLang_Error = SL_UNKNOWN_ERROR;
-
- _SLcompile_ptr = _SLcompile;
- Compile_Mode_Function = compile_basic_token_mode;
-
- Lang_Break = /* Lang_Continue = */ Lang_Return = 0;
- Trace_Mode = 0;
-
- while (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_BLOCK)
- lang_end_block();
-
- if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_FUNCTION)
- {
- /* Terminate function definition and free variables */
- lang_define_function (NULL, SLANG_FUNCTION, 0, Global_NameSpace);
- if (lang_free_branch (This_Compile_Block))
- SLfree((char *)This_Compile_Block);
- }
- Lang_Defining_Function = 0;
-
- SLang_Error = save;
-
- if (SLang_Error == SL_STACK_OVERFLOW)
- {
- /* This loop guarantees that the stack is properly cleaned. */
- while (_SLStack_Pointer != _SLRun_Stack)
- {
- SLdo_pop ();
- }
- }
-
- while ((This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
- && (0 == pop_block_context ()))
- ;
-
- if (localv)
- {
- Next_Function_Num_Args = SLang_Num_Function_Args = 0;
- Local_Variable_Frame = Local_Variable_Stack;
- Recursion_Depth = 0;
- Frame_Pointer = _SLStack_Pointer;
- Frame_Pointer_Depth = 0;
- Switch_Obj_Ptr = Switch_Objects;
- while (Switch_Obj_Ptr < Switch_Obj_Max)
- {
- SLang_free_object (Switch_Obj_Ptr);
- Switch_Obj_Ptr++;
- }
- Switch_Obj_Ptr = Switch_Objects;
- }
-}
-
-static void compile_directive (unsigned char sub_type)
-{
- /* This function is called only from compile_directive_mode which is
- * only possible when a block is available.
- */
-
- /* use BLOCK */
- Compile_ByteCode_Ptr--;
- Compile_ByteCode_Ptr->bc_sub_type = sub_type;
-
- lang_try_now ();
-}
-
-static void compile_unary (int op, unsigned char mt)
-{
- Compile_ByteCode_Ptr->bc_main_type = mt;
- Compile_ByteCode_Ptr->b.i_blk = op;
- Compile_ByteCode_Ptr->bc_sub_type = 0;
-
- lang_try_now ();
-}
-
-
-static void compile_binary (int op)
-{
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_BINARY;
- Compile_ByteCode_Ptr->b.i_blk = op;
- Compile_ByteCode_Ptr->bc_sub_type = 0;
-
- lang_try_now ();
-}
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-static int try_compressed_bytecode (unsigned char last_bc, unsigned char bc)
-{
- if (Compile_ByteCode_Ptr != This_Compile_Block)
- {
- SLBlock_Type *b;
- b = Compile_ByteCode_Ptr - 1;
- if (b->bc_main_type == last_bc)
- {
- Compile_ByteCode_Ptr = b;
- b->bc_main_type = bc;
- lang_try_now ();
- return 0;
- }
- }
- return -1;
-}
-#endif
-
-static void compile_fast_binary (int op, unsigned char bc)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (0 == try_compressed_bytecode (_SLANG_BC_LITERAL_INT, bc))
- return;
-#else
- (void) bc;
-#endif
- compile_binary (op);
-}
-
-/* This is a hack */
-typedef struct _Special_NameTable_Type
-{
- char *name;
- int (*fun) (struct _Special_NameTable_Type *, _SLang_Token_Type *);
- VOID_STAR blk_data;
- unsigned char main_type;
-}
-Special_NameTable_Type;
-
-static int handle_special (Special_NameTable_Type *nt, _SLang_Token_Type *tok)
-{
- (void) tok;
- Compile_ByteCode_Ptr->bc_main_type = nt->main_type;
- Compile_ByteCode_Ptr->b.ptr_blk = nt->blk_data;
- return 0;
-}
-
-static int handle_special_file (Special_NameTable_Type *nt, _SLang_Token_Type *tok)
-{
- char *name;
-
- (void) nt; (void) tok;
-
- if (This_Static_NameSpace == NULL) name = "***Unknown***";
- else
- name = This_Static_NameSpace->name;
-
- name = SLang_create_slstring (name);
- if (name == NULL)
- return -1;
-
- Compile_ByteCode_Ptr->b.s_blk = name;
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL_STR;
- Compile_ByteCode_Ptr->bc_sub_type = SLANG_STRING_TYPE;
- return 0;
-}
-
-static int handle_special_line (Special_NameTable_Type *nt, _SLang_Token_Type *tok)
-{
- (void) nt;
-
-#if _SLANG_HAS_DEBUG_CODE
- Compile_ByteCode_Ptr->b.l_blk = (long) tok->line_number;
-#endif
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
- Compile_ByteCode_Ptr->bc_sub_type = SLANG_UINT_TYPE;
-
- return 0;
-}
-
-static Special_NameTable_Type Special_Name_Table [] =
-{
- {"EXECUTE_ERROR_BLOCK", handle_special, NULL, _SLANG_BC_X_ERROR},
- {"X_USER_BLOCK0", handle_special, NULL, _SLANG_BC_X_USER0},
- {"X_USER_BLOCK1", handle_special, NULL, _SLANG_BC_X_USER1},
- {"X_USER_BLOCK2", handle_special, NULL, _SLANG_BC_X_USER2},
- {"X_USER_BLOCK3", handle_special, NULL, _SLANG_BC_X_USER3},
- {"X_USER_BLOCK4", handle_special, NULL, _SLANG_BC_X_USER4},
- {"__FILE__", handle_special_file, NULL, 0},
- {"__LINE__", handle_special_line, NULL, 0},
-#if 0
- {"__NAMESPACE__", handle_special_namespace, NULL, 0},
-#endif
- {NULL, NULL, NULL, 0}
-};
-
-static void compile_hashed_identifier (char *name, unsigned long hash, _SLang_Token_Type *tok)
-{
- SLang_Name_Type *entry;
- unsigned char name_type;
-
- entry = locate_hashed_name (name, hash);
-
- if (entry == NULL)
- {
- Special_NameTable_Type *nt = Special_Name_Table;
-
- while (nt->name != NULL)
- {
- if (strcmp (name, nt->name))
- {
- nt++;
- continue;
- }
-
- if (0 == (*nt->fun)(nt, tok))
- lang_try_now ();
- return;
- }
-
- SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
- return;
- }
-
- name_type = entry->name_type;
- Compile_ByteCode_Ptr->bc_main_type = name_type;
-
- if (name_type == SLANG_LVARIABLE)
- Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) entry)->local_var_number;
- else
- Compile_ByteCode_Ptr->b.nt_blk = entry;
-
- lang_try_now ();
-}
-
-static void compile_tmp_variable (char *name, unsigned long hash)
-{
- SLang_Name_Type *entry;
- unsigned char name_type;
-
- if (NULL == (entry = locate_hashed_name (name, hash)))
- {
- SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
- return;
- }
-
- name_type = entry->name_type;
- switch (name_type)
- {
- case SLANG_LVARIABLE:
- Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) entry)->local_var_number;
- break;
-
- case SLANG_GVARIABLE:
- case SLANG_PVARIABLE:
- Compile_ByteCode_Ptr->b.nt_blk = entry;
- break;
-
- default:
- SLang_verror (SL_SYNTAX_ERROR, "__tmp(%s) does not specifiy a variable", name);
- return;
- }
-
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_TMP;
- Compile_ByteCode_Ptr->bc_sub_type = name_type;
-
- lang_try_now ();
-}
-
-static void compile_simple (unsigned char main_type)
-{
- Compile_ByteCode_Ptr->bc_main_type = main_type;
- Compile_ByteCode_Ptr->bc_sub_type = 0;
- Compile_ByteCode_Ptr->b.blk = NULL;
- lang_try_now ();
-}
-
-static void compile_identifier (char *name, _SLang_Token_Type *tok)
-{
- compile_hashed_identifier (name, _SLcompute_string_hash (name), tok);
-}
-
-static void compile_call_direct (int (*f) (void), unsigned char byte_code)
-{
- Compile_ByteCode_Ptr->b.call_function = f;
- Compile_ByteCode_Ptr->bc_main_type = byte_code;
- Compile_ByteCode_Ptr->bc_sub_type = 0;
- lang_try_now ();
-}
-
-static void compile_lvar_call_direct (int (*f)(void), unsigned char bc,
- unsigned char frame_op)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (0 == try_compressed_bytecode (_SLANG_BC_LVARIABLE, bc))
- return;
-#else
- (void) bc;
-#endif
-
- compile_call_direct (f, frame_op);
-}
-
-static void compile_integer (long i, unsigned char bc_main_type, unsigned char bc_sub_type)
-{
- Compile_ByteCode_Ptr->b.l_blk = i;
- Compile_ByteCode_Ptr->bc_main_type = bc_main_type;
- Compile_ByteCode_Ptr->bc_sub_type = bc_sub_type;
-
- lang_try_now ();
-}
-
-#if SLANG_HAS_FLOAT
-static void compile_double (char *str, unsigned char type)
-{
- double d;
- unsigned int factor = 1;
- double *ptr;
-
-#if 1
- d = _SLang_atof (str);
-#else
- if (1 != sscanf (str, "%lf", &d))
- {
- SLang_verror (SL_SYNTAX_ERROR, "Unable to convert %s to double", str);
- return;
- }
-#endif
-
-#if SLANG_HAS_COMPLEX
- if (type == SLANG_COMPLEX_TYPE) factor = 2;
-#endif
- if (NULL == (ptr = (double *) SLmalloc(factor * sizeof(double))))
- return;
-
- Compile_ByteCode_Ptr->b.double_blk = ptr;
-#if SLANG_HAS_COMPLEX
- if (type == SLANG_COMPLEX_TYPE)
- *ptr++ = 0;
-#endif
- *ptr = d;
-
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
- Compile_ByteCode_Ptr->bc_sub_type = type;
- lang_try_now ();
-}
-
-static void compile_float (char *s)
-{
- float x;
-
-#if 1
- x = (float) _SLang_atof (s);
-#else
- if (1 != sscanf (s, "%f", &x))
- {
- SLang_verror (SL_SYNTAX_ERROR, "Unable to convert %s to float", s);
- return;
- }
-#endif
- Compile_ByteCode_Ptr->b.float_blk = x;
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
- Compile_ByteCode_Ptr->bc_sub_type = SLANG_FLOAT_TYPE;
- lang_try_now ();
-}
-
-#endif
-
-static void compile_string (char *s, unsigned long hash)
-{
- if (NULL == (Compile_ByteCode_Ptr->b.s_blk = _SLstring_dup_hashed_string (s, hash)))
- return;
-
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL_STR;
- Compile_ByteCode_Ptr->bc_sub_type = SLANG_STRING_TYPE;
-
- lang_try_now ();
-}
-
-static void compile_bstring (SLang_BString_Type *s)
-{
- if (NULL == (Compile_ByteCode_Ptr->b.bs_blk = SLbstring_dup (s)))
- return;
-
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
- Compile_ByteCode_Ptr->bc_sub_type = SLANG_BSTRING_TYPE;
-
- lang_try_now ();
-}
-
-/* assign_type is one of _SLANG_BCST_ASSIGN, ... values */
-static void compile_assign (unsigned char assign_type,
- char *name, unsigned long hash)
-{
- SLang_Name_Type *v;
- unsigned char main_type;
- SLang_Class_Type *cl;
-
- v = locate_hashed_name (name, hash);
- if (v == NULL)
- {
- if ((_SLang_Auto_Declare_Globals == 0)
- || (NULL != strchr (name, '-')) /* namespace->name form */
- || Lang_Defining_Function
- || (assign_type != _SLANG_BCST_ASSIGN)
- || (This_Static_NameSpace == NULL))
- {
- SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
- return;
- }
- /* Note that function local variables are not at top level */
-
- /* Variables that are automatically declared are given static
- * scope.
- */
- if ((NULL != SLang_Auto_Declare_Var_Hook)
- && (-1 == (*SLang_Auto_Declare_Var_Hook) (name)))
- return;
-
- if ((-1 == add_global_variable (name, SLANG_GVARIABLE, hash, This_Static_NameSpace))
- || (NULL == (v = locate_hashed_name (name, hash))))
- return;
- }
-
- switch (v->name_type)
- {
- case SLANG_LVARIABLE:
- main_type = _SLANG_BC_SET_LOCAL_LVALUE;
- Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) v)->local_var_number;
- break;
-
- case SLANG_GVARIABLE:
- case SLANG_PVARIABLE:
- main_type = _SLANG_BC_SET_GLOBAL_LVALUE;
- Compile_ByteCode_Ptr->b.nt_blk = v;
- break;
-
- case SLANG_IVARIABLE:
- cl = _SLclass_get_class (((SLang_Intrin_Var_Type *)v)->type);
- if (cl->cl_class_type != SLANG_CLASS_TYPE_SCALAR)
- {
- SLang_verror (SL_SYNTAX_ERROR, "Assignment to %s is not allowed", name);
- return;
- }
- main_type = _SLANG_BC_SET_INTRIN_LVALUE;
- Compile_ByteCode_Ptr->b.nt_blk = v;
- break;
-
- case SLANG_RVARIABLE:
- SLang_verror (SL_READONLY_ERROR, "%s is read-only", name);
- return;
-
- default:
- SLang_verror (SL_DUPLICATE_DEFINITION, "%s may not be used as an lvalue", name);
- return;
- }
-
- Compile_ByteCode_Ptr->bc_sub_type = assign_type;
- Compile_ByteCode_Ptr->bc_main_type = main_type;
-
- lang_try_now ();
-}
-
-static void compile_deref_assign (char *name, unsigned long hash)
-{
- SLang_Name_Type *v;
-
- v = locate_hashed_name (name, hash);
-
- if (v == NULL)
- {
- SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
- return;
- }
-
- switch (v->name_type)
- {
- case SLANG_LVARIABLE:
- Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) v)->local_var_number;
- break;
-
- case SLANG_GVARIABLE:
- case SLANG_PVARIABLE:
- Compile_ByteCode_Ptr->b.nt_blk = v;
- break;
-
- default:
- /* FIXME: Priority=low
- * This could be made to work. It is not a priority because
- * I cannot imagine application intrinsics which are references.
- */
- SLang_verror (SL_NOT_IMPLEMENTED, "Deref assignment to %s is not allowed", name);
- return;
- }
-
- Compile_ByteCode_Ptr->bc_sub_type = v->name_type;
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_DEREF_ASSIGN;
-
- lang_try_now ();
-}
-
-static void
-compile_struct_assign (_SLang_Token_Type *t)
-{
- Compile_ByteCode_Ptr->bc_sub_type = _SLANG_BCST_ASSIGN + (t->type - _STRUCT_ASSIGN_TOKEN);
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_SET_STRUCT_LVALUE;
- Compile_ByteCode_Ptr->b.s_blk = _SLstring_dup_hashed_string (t->v.s_val, t->hash);
- lang_try_now ();
-}
-
-static void
-compile_array_assign (_SLang_Token_Type *t)
-{
- Compile_ByteCode_Ptr->bc_sub_type = _SLANG_BCST_ASSIGN + (t->type - _ARRAY_ASSIGN_TOKEN);
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_SET_ARRAY_LVALUE;
- Compile_ByteCode_Ptr->b.s_blk = NULL;
- lang_try_now ();
-}
-
-static void compile_dot(_SLang_Token_Type *t)
-{
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_FIELD;
- Compile_ByteCode_Ptr->b.s_blk = _SLstring_dup_hashed_string(t->v.s_val, t->hash);
- lang_try_now ();
-}
-
-static void compile_ref (char *name, unsigned long hash)
-{
- SLang_Name_Type *entry;
- unsigned char main_type;
-
- if (NULL == (entry = locate_hashed_name (name, hash)))
- {
- SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
- return;
- }
-
- main_type = entry->name_type;
-
- if (main_type == SLANG_LVARIABLE)
- {
- main_type = _SLANG_BC_LOBJPTR;
- Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *)entry)->local_var_number;
- }
- else
- {
- main_type = _SLANG_BC_GOBJPTR;
- Compile_ByteCode_Ptr->b.nt_blk = entry;
- }
-
- Compile_ByteCode_Ptr->bc_main_type = main_type;
- lang_try_now ();
-}
-
-static void compile_break (unsigned char break_type,
- int requires_block, int requires_fun,
- char *str)
-{
- if ((requires_fun
- && (Lang_Defining_Function == 0))
- || (requires_block
- && (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_BLOCK)))
- {
- SLang_verror (SL_SYNTAX_ERROR, "misplaced %s", str);
- return;
- }
-
- Compile_ByteCode_Ptr->bc_main_type = break_type;
- Compile_ByteCode_Ptr->bc_sub_type = 0;
-
- lang_try_now ();
-}
-
-static void compile_public_variable_mode (_SLang_Token_Type *t)
-{
- if (t->type == IDENT_TOKEN)
- {
- /* If the variable is already defined in the static hash table,
- * generate an error.
- */
- if ((This_Static_NameSpace != NULL)
- && (NULL != locate_name_in_table (t->v.s_val, t->hash, This_Static_NameSpace->table, This_Static_NameSpace->table_size)))
- {
- SLang_verror (SL_DUPLICATE_DEFINITION,
- "%s already has static or private linkage in this unit",
- t->v.s_val);
- return;
- }
- add_global_variable (t->v.s_val, SLANG_GVARIABLE, t->hash, Global_NameSpace);
- }
- else if (t->type == CBRACKET_TOKEN)
- Compile_Mode_Function = compile_basic_token_mode;
- else
- SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_local_variable_mode (_SLang_Token_Type *t)
-{
- if (t->type == IDENT_TOKEN)
- add_local_variable (t->v.s_val, t->hash);
- else if (t->type == CBRACKET_TOKEN)
- Compile_Mode_Function = compile_basic_token_mode;
- else
- SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_static_variable_mode (_SLang_Token_Type *t)
-{
- if (t->type == IDENT_TOKEN)
- add_global_variable (t->v.s_val, SLANG_GVARIABLE, t->hash, This_Static_NameSpace);
- else if (t->type == CBRACKET_TOKEN)
- Compile_Mode_Function = compile_basic_token_mode;
- else
- SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_private_variable_mode (_SLang_Token_Type *t)
-{
- if (t->type == IDENT_TOKEN)
- add_global_variable (t->v.s_val, SLANG_PVARIABLE, t->hash, This_Static_NameSpace);
- else if (t->type == CBRACKET_TOKEN)
- Compile_Mode_Function = compile_basic_token_mode;
- else
- SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_function_mode (_SLang_Token_Type *t)
-{
- if (-1 == lang_check_space ())
- return;
-
- if (t->type != IDENT_TOKEN)
- SLang_verror (SL_SYNTAX_ERROR, "Expecting function name");
- else
- lang_define_function (t->v.s_val, SLANG_FUNCTION, t->hash, Global_NameSpace);
-
- Compile_Mode_Function = compile_basic_token_mode;
-}
-
-/* An error block is not permitted to contain continue or break statements.
- * This restriction may be removed later but for now reject them.
- */
-static int check_error_block (void)
-{
- SLBlock_Type *p;
- unsigned char t;
-
- /* Back up to the block and then scan it. */
- p = (Compile_ByteCode_Ptr - 1)->b.blk;
-
- while (0 != (t = p->bc_main_type))
- {
- if ((t == _SLANG_BC_BREAK)
- || (t == _SLANG_BC_CONTINUE))
- {
- SLang_verror (SL_SYNTAX_ERROR,
- "An ERROR_BLOCK is not permitted to contain continue or break statements");
- return -1;
- }
- p++;
- }
- return 0;
-}
-
-/* The only allowed tokens are the directives and another block start.
- * The mode is only active if a block is available. The inner_interp routine
- * expects such safety checks.
- */
-static void compile_directive_mode (_SLang_Token_Type *t)
-{
- int bc_sub_type;
-
- if (-1 == lang_check_space ())
- return;
-
- bc_sub_type = -1;
-
- switch (t->type)
- {
- case FOREVER_TOKEN:
- bc_sub_type = _SLANG_BCST_FOREVER;
- break;
-
- case IFNOT_TOKEN:
- bc_sub_type = _SLANG_BCST_IFNOT;
- break;
-
- case IF_TOKEN:
- bc_sub_type = _SLANG_BCST_IF;
- break;
-
- case ANDELSE_TOKEN:
- bc_sub_type = _SLANG_BCST_ANDELSE;
- break;
-
- case SWITCH_TOKEN:
- bc_sub_type = _SLANG_BCST_SWITCH;
- break;
-
- case EXITBLK_TOKEN:
- if (Lang_Defining_Function == 0)
- {
- SLang_verror (SL_SYNTAX_ERROR, "misplaced EXIT_BLOCK");
- break;
- }
- bc_sub_type = _SLANG_BCST_EXIT_BLOCK;
- break;
-
- case ERRBLK_TOKEN:
- if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_TOP_LEVEL)
- {
- SLang_verror (SL_SYNTAX_ERROR, "misplaced ERROR_BLOCK");
- break;
- }
- if (0 == check_error_block ())
- bc_sub_type = _SLANG_BCST_ERROR_BLOCK;
- break;
-
- case USRBLK0_TOKEN:
- case USRBLK1_TOKEN:
- case USRBLK2_TOKEN:
- case USRBLK3_TOKEN:
- case USRBLK4_TOKEN:
- if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_TOP_LEVEL)
- {
- SLang_verror (SL_SYNTAX_ERROR, "misplaced USER_BLOCK");
- break;
- }
- bc_sub_type = _SLANG_BCST_USER_BLOCK0 + (t->type - USRBLK0_TOKEN);
- break;
-
- case NOTELSE_TOKEN:
- bc_sub_type = _SLANG_BCST_NOTELSE;
- break;
-
- case ELSE_TOKEN:
- bc_sub_type = _SLANG_BCST_ELSE;
- break;
-
- case LOOP_TOKEN:
- bc_sub_type = _SLANG_BCST_LOOP;
- break;
-
- case DOWHILE_TOKEN:
- bc_sub_type = _SLANG_BCST_DOWHILE;
- break;
-
- case WHILE_TOKEN:
- bc_sub_type = _SLANG_BCST_WHILE;
- break;
-
- case ORELSE_TOKEN:
- bc_sub_type = _SLANG_BCST_ORELSE;
- break;
-
- case _FOR_TOKEN:
- bc_sub_type = _SLANG_BCST_FOR;
- break;
-
- case FOR_TOKEN:
- bc_sub_type = _SLANG_BCST_CFOR;
- break;
-
- case FOREACH_TOKEN:
- bc_sub_type = _SLANG_BCST_FOREACH;
- break;
-
- case OBRACE_TOKEN:
- lang_begin_block ();
- break;
-
- default:
- SLang_verror (SL_SYNTAX_ERROR, "Expecting directive token. Found 0x%X", t->type);
- break;
- }
-
- /* Reset this pointer first because compile_directive may cause a
- * file to be loaded.
- */
- Compile_Mode_Function = compile_basic_token_mode;
-
- if (bc_sub_type != -1)
- compile_directive (bc_sub_type);
-}
-
-static unsigned int Assign_Mode_Type;
-static void compile_assign_mode (_SLang_Token_Type *t)
-{
- if (t->type != IDENT_TOKEN)
- {
- SLang_verror (SL_SYNTAX_ERROR, "Expecting identifier for assignment");
- return;
- }
-
- compile_assign (Assign_Mode_Type, t->v.s_val, t->hash);
- Compile_Mode_Function = compile_basic_token_mode;
-}
-
-static void compile_basic_token_mode (_SLang_Token_Type *t)
-{
- if (-1 == lang_check_space ())
- return;
-
- switch (t->type)
- {
- case PUSH_TOKEN:
- case NOP_TOKEN:
- case EOF_TOKEN:
- case READONLY_TOKEN:
- case DO_TOKEN:
- case VARIABLE_TOKEN:
- case SEMICOLON_TOKEN:
- default:
- SLang_verror (SL_SYNTAX_ERROR, "Unknown or unsupported token type 0x%X", t->type);
- break;
-
- case DEREF_TOKEN:
- compile_call_direct (dereference_object, _SLANG_BC_CALL_DIRECT);
- break;
-
- case STRUCT_TOKEN:
- compile_call_direct (_SLstruct_define_struct, _SLANG_BC_CALL_DIRECT);
- break;
-
- case TYPEDEF_TOKEN:
- compile_call_direct (_SLstruct_define_typedef, _SLANG_BC_CALL_DIRECT);
- break;
-
- case TMP_TOKEN:
- compile_tmp_variable (t->v.s_val, t->hash);
- break;
-
- case DOT_TOKEN: /* X . field */
- compile_dot (t);
- break;
-
- case COMMA_TOKEN:
- break; /* do nothing */
-
- case IDENT_TOKEN:
- compile_hashed_identifier (t->v.s_val, t->hash, t);
- break;
-
- case _REF_TOKEN:
- compile_ref (t->v.s_val, t->hash);
- break;
-
- case ARG_TOKEN:
- compile_call_direct (SLang_start_arg_list, _SLANG_BC_CALL_DIRECT);
- break;
-
- case EARG_TOKEN:
- compile_lvar_call_direct (SLang_end_arg_list, _SLANG_BC_EARG_LVARIABLE, _SLANG_BC_CALL_DIRECT);
- break;
-
- case COLON_TOKEN:
- if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_BLOCK)
- compile_simple (_SLANG_BC_LABEL);
- else SLang_Error = SL_SYNTAX_ERROR;
- break;
-
- case POP_TOKEN:
- compile_call_direct (SLdo_pop, _SLANG_BC_CALL_DIRECT);
- break;
-
- case CASE_TOKEN:
- if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_BLOCK)
- SLang_verror (SL_SYNTAX_ERROR, "Misplaced 'case'");
- else
- compile_call_direct (case_function, _SLANG_BC_CALL_DIRECT);
- break;
-
- case CHAR_TOKEN:
- compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_CHAR_TYPE);
- break;
- case SHORT_TOKEN:
- compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_SHORT_TYPE);
- break;
- case INT_TOKEN:
- compile_integer (t->v.long_val, _SLANG_BC_LITERAL_INT, SLANG_INT_TYPE);
- break;
- case UCHAR_TOKEN:
- compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_UCHAR_TYPE);
- break;
- case USHORT_TOKEN:
- compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_USHORT_TYPE);
- break;
- case UINT_TOKEN:
- compile_integer (t->v.long_val, _SLANG_BC_LITERAL_INT, SLANG_UINT_TYPE);
- break;
- case LONG_TOKEN:
- compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_LONG_TYPE);
- break;
- case ULONG_TOKEN:
- compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_ULONG_TYPE);
- break;
-
-#if SLANG_HAS_FLOAT
- case FLOAT_TOKEN:
- compile_float (t->v.s_val);
- break;
-
- case DOUBLE_TOKEN:
- compile_double (t->v.s_val, SLANG_DOUBLE_TYPE);
- break;
-#endif
-#if SLANG_HAS_COMPLEX
- case COMPLEX_TOKEN:
- compile_double (t->v.s_val, SLANG_COMPLEX_TYPE);
- break;
-#endif
-
- case STRING_TOKEN:
- compile_string (t->v.s_val, t->hash);
- break;
-
- case _BSTRING_TOKEN:
- compile_bstring (SLbstring_create ((unsigned char *)t->v.s_val, (unsigned int) t->hash));
- break;
-
- case BSTRING_TOKEN:
- compile_bstring (t->v.b_val);
- break;
-
- case _NULL_TOKEN:
- compile_identifier ("NULL", t);
- break;
-
- case _INLINE_WILDCARD_ARRAY_TOKEN:
- compile_call_direct (_SLarray_wildcard_array, _SLANG_BC_CALL_DIRECT);
- break;
-
- case _INLINE_ARRAY_TOKEN:
- compile_call_direct (_SLarray_inline_array, _SLANG_BC_CALL_DIRECT_FRAME);
- break;
-
- case _INLINE_IMPLICIT_ARRAY_TOKEN:
- compile_call_direct (_SLarray_inline_implicit_array, _SLANG_BC_CALL_DIRECT_FRAME);
- break;
-
- case ARRAY_TOKEN:
- compile_lvar_call_direct (_SLarray_aget, _SLANG_BC_LVARIABLE_AGET, _SLANG_BC_CALL_DIRECT_FRAME);
- break;
-
- /* Note: I need to add the other _ARRAY assign tokens. */
- case _ARRAY_PLUSEQS_TOKEN:
- case _ARRAY_MINUSEQS_TOKEN:
- case _ARRAY_TIMESEQS_TOKEN:
- case _ARRAY_DIVEQS_TOKEN:
- case _ARRAY_BOREQS_TOKEN:
- case _ARRAY_BANDEQS_TOKEN:
- case _ARRAY_POST_MINUSMINUS_TOKEN:
- case _ARRAY_MINUSMINUS_TOKEN:
- case _ARRAY_POST_PLUSPLUS_TOKEN:
- case _ARRAY_PLUSPLUS_TOKEN:
- compile_array_assign (t);
- break;
-
- case _ARRAY_ASSIGN_TOKEN:
- compile_lvar_call_direct (_SLarray_aput, _SLANG_BC_LVARIABLE_APUT, _SLANG_BC_CALL_DIRECT_FRAME);
- break;
-
- case _STRUCT_ASSIGN_TOKEN:
- case _STRUCT_PLUSEQS_TOKEN:
- case _STRUCT_MINUSEQS_TOKEN:
- case _STRUCT_TIMESEQS_TOKEN:
- case _STRUCT_DIVEQS_TOKEN:
- case _STRUCT_BOREQS_TOKEN:
- case _STRUCT_BANDEQS_TOKEN:
- case _STRUCT_POST_MINUSMINUS_TOKEN:
- case _STRUCT_MINUSMINUS_TOKEN:
- case _STRUCT_POST_PLUSPLUS_TOKEN:
- case _STRUCT_PLUSPLUS_TOKEN:
- compile_struct_assign (t);
- break;
-
- case _SCALAR_ASSIGN_TOKEN:
- case _SCALAR_PLUSEQS_TOKEN:
- case _SCALAR_MINUSEQS_TOKEN:
- case _SCALAR_TIMESEQS_TOKEN:
- case _SCALAR_DIVEQS_TOKEN:
- case _SCALAR_BOREQS_TOKEN:
- case _SCALAR_BANDEQS_TOKEN:
- case _SCALAR_POST_MINUSMINUS_TOKEN:
- case _SCALAR_MINUSMINUS_TOKEN:
- case _SCALAR_POST_PLUSPLUS_TOKEN:
- case _SCALAR_PLUSPLUS_TOKEN:
- compile_assign (_SLANG_BCST_ASSIGN + (t->type - _SCALAR_ASSIGN_TOKEN),
- t->v.s_val, t->hash);
- break;
-
- case _DEREF_ASSIGN_TOKEN:
- compile_deref_assign (t->v.s_val, t->hash);
- break;
-
- /* For processing RPN tokens */
- case ASSIGN_TOKEN:
- case PLUSEQS_TOKEN:
- case MINUSEQS_TOKEN:
- case TIMESEQS_TOKEN:
- case DIVEQS_TOKEN:
- case BOREQS_TOKEN:
- case BANDEQS_TOKEN:
- case POST_MINUSMINUS_TOKEN:
- case MINUSMINUS_TOKEN:
- case POST_PLUSPLUS_TOKEN:
- case PLUSPLUS_TOKEN:
- Compile_Mode_Function = compile_assign_mode;
- Assign_Mode_Type = _SLANG_BCST_ASSIGN + (t->type - ASSIGN_TOKEN);
- break;
-
- case LT_TOKEN:
- compile_binary (SLANG_LT);
- break;
-
- case LE_TOKEN:
- compile_binary (SLANG_LE);
- break;
-
- case GT_TOKEN:
- compile_binary (SLANG_GT);
- break;
-
- case GE_TOKEN:
- compile_binary (SLANG_GE);
- break;
-
- case EQ_TOKEN:
- compile_binary (SLANG_EQ);
- break;
-
- case NE_TOKEN:
- compile_binary (SLANG_NE);
- break;
-
- case AND_TOKEN:
- compile_binary (SLANG_AND);
- break;
-
- case ADD_TOKEN:
- compile_fast_binary (SLANG_PLUS, _SLANG_BC_INTEGER_PLUS);
- break;
-
- case SUB_TOKEN:
- compile_fast_binary (SLANG_MINUS, _SLANG_BC_INTEGER_MINUS);
- break;
-
- case TIMES_TOKEN:
- compile_binary (SLANG_TIMES);
- break;
-
- case DIV_TOKEN:
- compile_binary (SLANG_DIVIDE);
- break;
-
- case POW_TOKEN:
- compile_binary (SLANG_POW);
- break;
-
- case BXOR_TOKEN:
- compile_binary (SLANG_BXOR);
- break;
-
- case BAND_TOKEN:
- compile_binary (SLANG_BAND);
- break;
-
- case BOR_TOKEN:
- compile_binary (SLANG_BOR);
- break;
-
- case SHR_TOKEN:
- compile_binary (SLANG_SHR);
- break;
-
- case SHL_TOKEN:
- compile_binary (SLANG_SHL);
- break;
-
- case MOD_TOKEN:
- compile_binary (SLANG_MOD);
- break;
-
- case OR_TOKEN:
- compile_binary (SLANG_OR);
- break;
-
- case NOT_TOKEN:
- compile_unary (SLANG_NOT, _SLANG_BC_UNARY);
- break;
-
- case BNOT_TOKEN:
- compile_unary (SLANG_BNOT, _SLANG_BC_UNARY);
- break;
-
- case MUL2_TOKEN:
- compile_unary (SLANG_MUL2, _SLANG_BC_UNARY_FUNC);
- break;
-
- case CHS_TOKEN:
- compile_unary (SLANG_CHS, _SLANG_BC_UNARY_FUNC);
- break;
-
- case ABS_TOKEN:
- compile_unary (SLANG_ABS, _SLANG_BC_UNARY_FUNC);
- break;
-
- case SQR_TOKEN:
- compile_unary (SLANG_SQR, _SLANG_BC_UNARY_FUNC);
- break;
-
- case SIGN_TOKEN:
- compile_unary (SLANG_SIGN, _SLANG_BC_UNARY_FUNC);
- break;
-
- case BREAK_TOKEN:
- compile_break (_SLANG_BC_BREAK, 1, 0, "break");
- break;
-
- case RETURN_TOKEN:
- compile_break (_SLANG_BC_RETURN, 0, 1, "return");
- break;
-
- case CONT_TOKEN:
- compile_break (_SLANG_BC_CONTINUE, 1, 0, "continue");
- break;
-
- case EXCH_TOKEN:
- compile_break (_SLANG_BC_EXCH, 0, 0, ""); /* FIXME: Priority=low */
- break;
-
- case STATIC_TOKEN:
- if (Lang_Defining_Function == 0)
- Compile_Mode_Function = compile_static_variable_mode;
- else
- SLang_verror (SL_NOT_IMPLEMENTED, "static variables not permitted in functions");
- break;
-
- case PRIVATE_TOKEN:
- if (Lang_Defining_Function == 0)
- Compile_Mode_Function = compile_private_variable_mode;
- else
- SLang_verror (SL_NOT_IMPLEMENTED, "private variables not permitted in functions");
- break;
-
- case PUBLIC_TOKEN:
- if (Lang_Defining_Function == 0)
- Compile_Mode_Function = compile_public_variable_mode;
- else
- SLang_verror (SL_NOT_IMPLEMENTED, "public variables not permitted in functions");
- break;
-
- case OBRACKET_TOKEN:
- if (Lang_Defining_Function == 0)
- Compile_Mode_Function = Default_Variable_Mode;
- else
- Compile_Mode_Function = compile_local_variable_mode;
- break;
-
- case OPAREN_TOKEN:
- lang_begin_function ();
- break;
-
- case DEFINE_STATIC_TOKEN:
- if (Lang_Defining_Function)
- define_static_function (t->v.s_val, t->hash);
- else SLang_Error = SL_SYNTAX_ERROR;
- break;
-
- case DEFINE_PRIVATE_TOKEN:
- if (Lang_Defining_Function)
- define_private_function (t->v.s_val, t->hash);
- else SLang_Error = SL_SYNTAX_ERROR;
- break;
-
- case DEFINE_PUBLIC_TOKEN:
- if (Lang_Defining_Function)
- define_public_function (t->v.s_val, t->hash);
- else SLang_Error = SL_SYNTAX_ERROR;
- break;
-
- case DEFINE_TOKEN:
- if (Lang_Defining_Function)
- (*Default_Define_Function) (t->v.s_val, t->hash);
- else
- SLang_Error = SL_SYNTAX_ERROR;
- break;
-
- case CPAREN_TOKEN:
- if (Lang_Defining_Function)
- Compile_Mode_Function = compile_function_mode;
- else SLang_Error = SL_SYNTAX_ERROR;
- break;
-
- case CBRACE_TOKEN:
- lang_end_block ();
- Compile_Mode_Function = compile_directive_mode;
- break;
-
- case OBRACE_TOKEN:
- lang_begin_block ();
- break;
-
- case FARG_TOKEN:
- Function_Args_Number = Local_Variable_Number;
- break;
-
-#if _SLANG_HAS_DEBUG_CODE
- case LINE_NUM_TOKEN:
- Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LINE_NUM;
- Compile_ByteCode_Ptr->b.l_blk = t->v.long_val;
- lang_try_now ();
- break;
-#endif
- case POUND_TOKEN:
- compile_call_direct (_SLarray_matrix_multiply, _SLANG_BC_CALL_DIRECT);
- break;
- }
-}
-
-void _SLcompile (_SLang_Token_Type *t)
-{
- if (SLang_Error == 0)
- {
- if (Compile_Mode_Function != compile_basic_token_mode)
- {
- if (Compile_Mode_Function == NULL)
- Compile_Mode_Function = compile_basic_token_mode;
-#if _SLANG_HAS_DEBUG_CODE
- if (t->type == LINE_NUM_TOKEN)
- {
- compile_basic_token_mode (t);
- return;
- }
-#endif
- }
-
- (*Compile_Mode_Function) (t);
- }
-
- if (SLang_Error)
- {
- Compile_Mode_Function = compile_basic_token_mode;
- SLang_restart (0);
- }
-}
-
-void (*_SLcompile_ptr)(_SLang_Token_Type *) = _SLcompile;
-
-typedef struct _Compile_Context_Type
-{
- struct _Compile_Context_Type *next;
- SLang_NameSpace_Type *static_namespace;
- void (*compile_variable_mode) (_SLang_Token_Type *);
- void (*define_function) (char *, unsigned long);
- int lang_defining_function;
- int local_variable_number;
- unsigned int function_args_number;
- SLang_Name_Type **locals_hash_table;
- void (*compile_mode_function)(_SLang_Token_Type *);
-#if _SLANG_HAS_DEBUG_CODE
- char *compile_filename;
-#endif
-}
-Compile_Context_Type;
-
-static Compile_Context_Type *Compile_Context_Stack;
-
-/* The only way the push/pop_context functions can get called is via
- * an eval type function. That can only happen when executed from a
- * top level block. This means that Compile_ByteCode_Ptr can always be
- * rest back to the beginning of a block.
- */
-
-static int pop_compile_context (void)
-{
- Compile_Context_Type *cc;
-
- if (NULL == (cc = Compile_Context_Stack))
- return -1;
-
- This_Static_NameSpace = cc->static_namespace;
- Compile_Context_Stack = cc->next;
- Default_Variable_Mode = cc->compile_variable_mode;
- Default_Define_Function = cc->define_function;
- Compile_Mode_Function = cc->compile_mode_function;
-
- Lang_Defining_Function = cc->lang_defining_function;
- Local_Variable_Number = cc->local_variable_number;
- Function_Args_Number = cc->function_args_number;
-
-#if _SLANG_HAS_DEBUG_CODE
- SLang_free_slstring (This_Compile_Filename);
- This_Compile_Filename = cc->compile_filename;
-#endif
-
- SLfree ((char *) Locals_Hash_Table);
- Locals_Hash_Table = cc->locals_hash_table;
-
- SLfree ((char *) cc);
-
- return 0;
-}
-
-static int push_compile_context (char *name)
-{
- Compile_Context_Type *cc;
- SLang_Name_Type **lns;
-
- cc = (Compile_Context_Type *)SLmalloc (sizeof (Compile_Context_Type));
- if (cc == NULL)
- return -1;
- memset ((char *) cc, 0, sizeof (Compile_Context_Type));
-
- lns = (SLang_Name_Type **) SLcalloc (sizeof (SLang_Name_Type *), SLLOCALS_HASH_TABLE_SIZE);
- if (lns == NULL)
- {
- SLfree ((char *) cc);
- return -1;
- }
-
-#if _SLANG_HAS_DEBUG_CODE
- if ((name != NULL)
- && (NULL == (name = SLang_create_slstring (name))))
- {
- SLfree ((char *) cc);
- SLfree ((char *) lns);
- return -1;
- }
-
- cc->compile_filename = This_Compile_Filename;
- This_Compile_Filename = name;
-#endif
-
- cc->static_namespace = This_Static_NameSpace;
- cc->compile_variable_mode = Default_Variable_Mode;
- cc->define_function = Default_Define_Function;
- cc->locals_hash_table = Locals_Hash_Table;
-
- cc->lang_defining_function = Lang_Defining_Function;
- cc->local_variable_number = Local_Variable_Number;
- cc->function_args_number = Function_Args_Number;
- cc->locals_hash_table = Locals_Hash_Table;
- cc->compile_mode_function = Compile_Mode_Function;
-
- cc->next = Compile_Context_Stack;
- Compile_Context_Stack = cc;
-
- Compile_Mode_Function = compile_basic_token_mode;
- Default_Variable_Mode = compile_public_variable_mode;
- Default_Define_Function = define_public_function;
- Lang_Defining_Function = 0;
- Local_Variable_Number = 0;
- Function_Args_Number = 0;
- Locals_Hash_Table = lns;
- return 0;
-}
-
-static int init_interpreter (void)
-{
- SLang_NameSpace_Type *ns;
-
- if (Global_NameSpace != NULL)
- return 0;
-
- if (NULL == (ns = _SLns_allocate_namespace ("***GLOBAL***", SLGLOBALS_HASH_TABLE_SIZE)))
- return -1;
- if (-1 == _SLns_set_namespace_name (ns, "Global"))
- return -1;
- Global_NameSpace = ns;
-
- _SLRun_Stack = (SLang_Object_Type *) SLcalloc (SLANG_MAX_STACK_LEN,
- sizeof (SLang_Object_Type));
- if (_SLRun_Stack == NULL)
- return -1;
-
- _SLStack_Pointer = _SLRun_Stack;
- _SLStack_Pointer_Max = _SLRun_Stack + SLANG_MAX_STACK_LEN;
-
- SLShort_Blocks[0].bc_main_type = _SLANG_BC_RETURN;
- SLShort_Blocks[2].bc_main_type = _SLANG_BC_BREAK;
- SLShort_Blocks[4].bc_main_type = _SLANG_BC_CONTINUE;
-
- Num_Args_Stack = (int *) SLmalloc (sizeof (int) * SLANG_MAX_RECURSIVE_DEPTH);
- if (Num_Args_Stack == NULL)
- {
- SLfree ((char *) _SLRun_Stack);
- return -1;
- }
- Recursion_Depth = 0;
- Frame_Pointer_Stack = (unsigned int *) SLmalloc (sizeof (unsigned int) * SLANG_MAX_RECURSIVE_DEPTH);
- if (Frame_Pointer_Stack == NULL)
- {
- SLfree ((char *) _SLRun_Stack);
- SLfree ((char *)Num_Args_Stack);
- return -1;
- }
- Frame_Pointer_Depth = 0;
- Frame_Pointer = _SLRun_Stack;
-
- Default_Variable_Mode = compile_public_variable_mode;
- Default_Define_Function = define_public_function;
- return 0;
-}
-
-static int add_generic_table (SLang_NameSpace_Type *ns,
- SLang_Name_Type *table, char *pp_name,
- unsigned int entry_len)
-{
- SLang_Name_Type *t, **ns_table;
- char *name;
- unsigned int table_size;
-
- if (-1 == init_interpreter ())
- return -1;
-
- if (ns == NULL)
- ns = Global_NameSpace;
-
- ns_table = ns->table;
- table_size = ns->table_size;
-
- if ((pp_name != NULL)
- && (-1 == SLdefine_for_ifdef (pp_name)))
- return -1;
-
- t = table;
- while (NULL != (name = t->name))
- {
- unsigned long hash;
-
- /* Backward compatibility: '.' WAS used as hash marker */
- if (*name == '.')
- {
- name++;
- t->name = name;
- }
-
- if (NULL == (name = SLang_create_slstring (name)))
- return -1;
-
- t->name = name;
-
- hash = _SLcompute_string_hash (name);
- hash = hash % table_size;
-
- t->next = ns_table [(unsigned int) hash];
- ns_table [(unsigned int) hash] = t;
-
- t = (SLang_Name_Type *) ((char *)t + entry_len);
- }
-
- return 0;
-}
-
-int SLadd_intrin_fun_table (SLang_Intrin_Fun_Type *tbl, char *pp)
-{
- return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Fun_Type));
-}
-
-int SLadd_intrin_var_table (SLang_Intrin_Var_Type *tbl, char *pp)
-{
- return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Var_Type));
-}
-
-int SLadd_app_unary_table (SLang_App_Unary_Type *tbl, char *pp)
-{
- return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_App_Unary_Type));
-}
-
-int SLadd_math_unary_table (SLang_Math_Unary_Type *tbl, char *pp)
-{
- return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Math_Unary_Type));
-}
-
-int SLadd_iconstant_table (SLang_IConstant_Type *tbl, char *pp)
-{
- return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_IConstant_Type));
-}
-
-#if SLANG_HAS_FLOAT
-int SLadd_dconstant_table (SLang_DConstant_Type *tbl, char *pp)
-{
- return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_DConstant_Type));
-}
-#endif
-
-/* ----------- */
-int SLns_add_intrin_fun_table (SLang_NameSpace_Type *ns, SLang_Intrin_Fun_Type *tbl, char *pp)
-{
- return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Fun_Type));
-}
-
-int SLns_add_intrin_var_table (SLang_NameSpace_Type *ns, SLang_Intrin_Var_Type *tbl, char *pp)
-{
- return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Var_Type));
-}
-
-int SLns_add_app_unary_table (SLang_NameSpace_Type *ns, SLang_App_Unary_Type *tbl, char *pp)
-{
- return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_App_Unary_Type));
-}
-
-int SLns_add_math_unary_table (SLang_NameSpace_Type *ns, SLang_Math_Unary_Type *tbl, char *pp)
-{
- return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Math_Unary_Type));
-}
-
-int SLns_add_iconstant_table (SLang_NameSpace_Type *ns, SLang_IConstant_Type *tbl, char *pp)
-{
- return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_IConstant_Type));
-}
-
-#if SLANG_HAS_FLOAT
-int SLns_add_dconstant_table (SLang_NameSpace_Type *ns, SLang_DConstant_Type *tbl, char *pp)
-{
- return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_DConstant_Type));
-}
-#endif
-
-/* what is a bitmapped value:
- * 1 intrin fun
- * 2 user fun
- * 4 intrin var
- * 8 user defined var
- */
-SLang_Array_Type *_SLang_apropos (char *namespace_name, char *pat, unsigned int what)
-{
- SLang_NameSpace_Type *ns;
-
- if (namespace_name == NULL)
- namespace_name = "Global";
-
- if (*namespace_name == 0)
- ns = This_Static_NameSpace;
- else ns = _SLns_find_namespace (namespace_name);
-
- return _SLnspace_apropos (ns, pat, what);
-}
-
-void _SLang_implements_intrinsic (char *name)
-{
- if (This_Static_NameSpace == NULL)
- {
- SLang_verror (SL_INTRINSIC_ERROR, "No namespace available");
- return;
- }
-
- (void) _SLns_set_namespace_name (This_Static_NameSpace, name);
-
- Default_Define_Function = define_static_function;
- Default_Variable_Mode = compile_static_variable_mode;
-}
-
-void _SLang_use_namespace_intrinsic (char *name)
-{
- SLang_NameSpace_Type *ns;
-
- if (NULL == (ns = _SLns_find_namespace (name)))
- {
- SLang_verror (SL_INTRINSIC_ERROR, "Namespace %s does not exist", name);
- return;
- }
- This_Static_NameSpace = ns;
- if (Global_NameSpace == ns)
- {
- Default_Define_Function = define_public_function;
- Default_Variable_Mode = compile_public_variable_mode;
- }
- else
- {
- Default_Define_Function = define_static_function;
- Default_Variable_Mode = compile_static_variable_mode;
- }
-}
-
-
-char *_SLang_cur_namespace_intrinsic (void)
-{
- if (This_Static_NameSpace == NULL)
- return "Global";
-
- if (This_Static_NameSpace->namespace_name == NULL)
- return "";
-
- return This_Static_NameSpace->namespace_name;
-}
diff --git a/mdk-stage1/slang/slang.h b/mdk-stage1/slang/slang.h
deleted file mode 100644
index 900b14043..000000000
--- a/mdk-stage1/slang/slang.h
+++ /dev/null
@@ -1,1930 +0,0 @@
-#ifndef DAVIS_SLANG_H_
-#define DAVIS_SLANG_H_
-/* -*- mode: C; mode: fold; -*- */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#define SLANG_VERSION 10404
-#define SLANG_VERSION_STRING "1.4.4"
-
-/*{{{ System Dependent Macros and Typedefs */
-
-#if defined(__WATCOMC__) && defined(DOS)
-# ifndef __MSDOS__
-# define __MSDOS__
-# endif
-# ifndef DOS386
-# define DOS386
-# endif
-# ifndef IBMPC_SYSTEM
-# define IBMPC_SYSTEM
-# endif
-#endif /* __watcomc__ */
-
-#if defined(unix) || defined(__unix)
-# ifndef __unix__
-# define __unix__ 1
-# endif
-#endif
-
-#if !defined(__GO32__)
-# ifdef __unix__
-# define REAL_UNIX_SYSTEM
-# endif
-#endif
-
-/* Set of the various defines for pc systems. This includes OS/2 */
-#ifdef __GO32__
-# ifndef __DJGPP__
-# define __DJGPP__ 1
-# endif
-# ifndef IBMPC_SYSTEM
-# define IBMPC_SYSTEM
-# endif
-#endif
-
-#ifdef __BORLANDC__
-# ifndef IBMPC_SYSTEM
-# define IBMPC_SYSTEM
-# endif
-#endif
-
-#ifdef __MSDOS__
-# ifndef IBMPC_SYSTEM
-# define IBMPC_SYSTEM
-# endif
-#endif
-
-#if defined(OS2) || defined(__os2__)
-# ifndef IBMPC_SYSTEM
-# define IBMPC_SYSTEM
-# endif
-# ifndef __os2__
-# define __os2__
-# endif
-#endif
-
-#if defined(__NT__) || defined(__MINGW32__) || defined(__CYGWIN32__)
-# ifndef IBMPC_SYSTEM
-# define IBMPC_SYSTEM
-# endif
-#endif
-
-#if defined(IBMPC_SYSTEM) || defined(VMS)
-# ifdef REAL_UNIX_SYSTEM
-# undef REAL_UNIX_SYSTEM
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-#if 0
-}
-#endif
-
-#include <stdio.h>
-#include <stdarg.h>
-#if defined(__STDC__) || defined(__BORLANDC__) || defined(__cplusplus)
-# include <stddef.h> /* for offsetof */
-#endif
-
-/* ---------------------------- Generic Macros ----------------------------- */
-
-/* __SC__ is defined for Symantec C++
- DOS386 is defined for -mx memory model, 32 bit DOS extender. */
-
-#if defined(__SC__) && !defined(DOS386)
-# include <dos.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <alloc.h>
-#endif
-
-#if defined (__cplusplus) || defined(__STDC__) || defined(IBMPC_SYSTEM)
- typedef void *VOID_STAR;
-#else
- typedef unsigned char *VOID_STAR;
-#endif
-
-typedef int (*FVOID_STAR)(void);
-
-#if defined(__MSDOS_) && defined(__BORLANDC__)
-# define SLFREE(buf) farfree((void far *)(buf))
-# define SLMALLOC(x) farmalloc((unsigned long) (x))
-# define SLREALLOC(buf, n) farrealloc((void far *) (buf), (unsigned long) (n))
-# define SLCALLOC(n, m) farcalloc((unsigned long) (n), (unsigned long) (m))
-#else
-# if defined(VMS) && !defined(__DECC)
-# define SLFREE VAXC$FREE_OPT
-# define SLMALLOC VAXC$MALLOC_OPT
-# define SLREALLOC VAXC$REALLOC_OPT
-# define SLCALLOC VAXC$CALLOC_OPT
-# else
-# define SLFREE(x) free((char *)(x))
-# define SLMALLOC malloc
-# define SLREALLOC realloc
-# define SLCALLOC calloc
-# endif
-#endif
-
- extern char *SLdebug_malloc (unsigned long);
- extern char *SLdebug_calloc (unsigned long, unsigned long);
- extern char *SLdebug_realloc (char *, unsigned long);
- extern void SLdebug_free (char *);
- extern void SLmalloc_dump_statistics (void);
- extern char *SLstrcpy(register char *, register char *);
- extern int SLstrcmp(register char *, register char *);
- extern char *SLstrncpy(char *, register char *, register int);
-
- extern void SLmemset (char *, char, int);
- extern char *SLmemchr (register char *, register char, register int);
- extern char *SLmemcpy (char *, char *, int);
- extern int SLmemcmp (char *, char *, int);
-
-/*}}}*/
-
-/*{{{ Interpreter Typedefs */
-
-typedef struct _SLang_Name_Type
-{
- char *name;
- struct _SLang_Name_Type *next;
- char name_type;
- /* These values must be less than 0x10 because they map directly
- * to byte codes. See _slang.h.
- */
-#define SLANG_LVARIABLE 0x01
-#define SLANG_GVARIABLE 0x02
-#define SLANG_IVARIABLE 0x03 /* intrinsic variables */
- /* Note!!! For Macro MAKE_VARIABLE below to work, SLANG_IVARIABLE Must
- be 1 less than SLANG_RVARIABLE!!! */
-#define SLANG_RVARIABLE 0x04 /* read only variable */
-#define SLANG_INTRINSIC 0x05
-#define SLANG_FUNCTION 0x06
-#define SLANG_MATH_UNARY 0x07
-#define SLANG_APP_UNARY 0x08
-#define SLANG_ICONSTANT 0x09
-#define SLANG_DCONSTANT 0x0A
-#define SLANG_PVARIABLE 0x0B /* private */
-#define SLANG_PFUNCTION 0x0C /* private */
-
- /* Rest of fields depend on name type */
-}
-SLang_Name_Type;
-
-typedef struct
-{
- char *name;
- struct _SLang_Name_Type *next; /* this is for the hash table */
- char name_type;
-
- FVOID_STAR i_fun; /* address of object */
-
- /* Do not change this without modifying slang.c:execute_intrinsic_fun */
-#define SLANG_MAX_INTRIN_ARGS 7
- unsigned char arg_types [SLANG_MAX_INTRIN_ARGS];
- unsigned char num_args;
- unsigned char return_type;
-}
-SLang_Intrin_Fun_Type;
-
-typedef struct
-{
- char *name;
- SLang_Name_Type *next;
- char name_type;
-
- VOID_STAR addr;
- unsigned char type;
-}
-SLang_Intrin_Var_Type;
-
-typedef struct
-{
- char *name;
- SLang_Name_Type *next;
- char name_type;
-
- int unary_op;
-}
-SLang_App_Unary_Type;
-
-typedef struct
-{
- char *name;
- SLang_Name_Type *next;
- char name_type;
-
- int unary_op;
-}
-SLang_Math_Unary_Type;
-
-typedef struct
-{
- char *name;
- SLang_Name_Type *next;
- char name_type;
- int i;
-}
-SLang_IConstant_Type;
-
-typedef struct
-{
- char *name;
- SLang_Name_Type *next;
- char name_type;
- double d;
-}
-SLang_DConstant_Type;
-
-typedef struct
-{
- char *field_name;
- unsigned int offset;
- unsigned char type;
- unsigned char read_only;
-}
-SLang_IStruct_Field_Type;
-
-extern int SLadd_intrin_fun_table (SLang_Intrin_Fun_Type *, char *);
-extern int SLadd_intrin_var_table (SLang_Intrin_Var_Type *, char *);
-extern int SLadd_app_unary_table (SLang_App_Unary_Type *, char *);
-extern int SLadd_math_unary_table (SLang_Math_Unary_Type *, char *);
-extern int SLadd_iconstant_table (SLang_IConstant_Type *, char *);
-extern int SLadd_dconstant_table (SLang_DConstant_Type *, char *);
-extern int SLadd_istruct_table (SLang_IStruct_Field_Type *, VOID_STAR, char *);
-
-typedef struct _SLang_NameSpace_Type SLang_NameSpace_Type;
-
-extern int SLns_add_intrin_fun_table (SLang_NameSpace_Type *, SLang_Intrin_Fun_Type *, char *);
-extern int SLns_add_intrin_var_table (SLang_NameSpace_Type *, SLang_Intrin_Var_Type *, char *);
-extern int SLns_add_app_unary_table (SLang_NameSpace_Type *, SLang_App_Unary_Type *, char *);
-extern int SLns_add_math_unary_table (SLang_NameSpace_Type *, SLang_Math_Unary_Type *, char *);
-extern int SLns_add_iconstant_table (SLang_NameSpace_Type *, SLang_IConstant_Type *, char *);
-extern int SLns_add_dconstant_table (SLang_NameSpace_Type *, SLang_DConstant_Type *, char *);
-extern int SLns_add_istruct_table (SLang_NameSpace_Type *, SLang_IStruct_Field_Type *, VOID_STAR, char *);
-
-extern SLang_NameSpace_Type *SLns_create_namespace (char *);
-extern void SLns_delete_namespace (SLang_NameSpace_Type *);
-
-typedef struct SLang_Load_Type
-{
- int type;
-
- VOID_STAR client_data;
- /* Pointer to data that client needs for loading */
-
- int auto_declare_globals;
- /* if non-zero, undefined global variables are declared as static */
-
- char *(*read)(struct SLang_Load_Type *);
- /* function to call to read next line from obj. */
-
- unsigned int line_num;
- /* Number of lines read, used for error reporting */
-
- int parse_level;
- /* 0 if at top level of parsing */
-
- char *name;
- /* Name of this object, e.g., filename. This name should be unique because
- * it alone determines the name space for static objects associated with
- * the compilable unit.
- */
-
- unsigned long reserved[4];
- /* For future expansion */
-} SLang_Load_Type;
-
-extern SLang_Load_Type *SLallocate_load_type (char *);
-extern void SLdeallocate_load_type (SLang_Load_Type *);
-
-/* Returns SLang_Error upon failure */
-extern int SLang_load_object (SLang_Load_Type *);
-extern int (*SLang_Load_File_Hook)(char *);
-extern int (*SLang_Auto_Declare_Var_Hook) (char *);
-
-extern int SLang_generate_debug_info (int);
-
-
-#if defined(ultrix) && !defined(__GNUC__)
-# ifndef NO_PROTOTYPES
-# define NO_PROTOTYPES
-# endif
-#endif
-
-#ifndef NO_PROTOTYPES
-# define _PROTO(x) x
-#else
-# define _PROTO(x) ()
-#endif
-
-typedef struct SL_OOBinary_Type
-{
- unsigned char data_type; /* partner type for binary op */
-
- int (*binary_function)_PROTO((int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR));
-
- int (*binary_result) _PROTO((int, unsigned char, unsigned char, unsigned char *));
- struct SL_OOBinary_Type *next;
-}
-SL_OOBinary_Type;
-
-typedef struct _SL_Typecast_Type
-{
- unsigned char data_type; /* to_type */
- int allow_implicit;
-
- int (*typecast)_PROTO((unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR));
- struct _SL_Typecast_Type *next;
-}
-SL_Typecast_Type;
-
-typedef struct _SLang_Struct_Type SLang_Struct_Type;
-
-#if defined(SL_APP_WANTS_FOREACH)
-/* It is up to the application to define struct _SLang_Foreach_Context_Type */
-typedef struct _SLang_Foreach_Context_Type SLang_Foreach_Context_Type;
-#else
-typedef int SLang_Foreach_Context_Type;
-#endif
-
-typedef struct
-{
- unsigned char cl_class_type;
-#define SLANG_CLASS_TYPE_MMT 0
-#define SLANG_CLASS_TYPE_SCALAR 1
-#define SLANG_CLASS_TYPE_VECTOR 2
-#define SLANG_CLASS_TYPE_PTR 3
-
- unsigned int cl_data_type; /* SLANG_INTEGER_TYPE, etc... */
- char *cl_name; /* slstring type */
-
- unsigned int cl_sizeof_type;
- VOID_STAR cl_transfer_buf; /* cl_sizeof_type bytes*/
-
- /* Methods */
-
- /* Most of the method functions are prototyped:
- * int method (unsigned char type, VOID_STAR addr);
- * Here, @type@ represents the type of object that the method is asked
- * to deal with. The second parameter @addr@ will contain the ADDRESS of
- * the object. For example, if type is SLANG_INT_TYPE, then @addr@ will
- * actually be int *. Similary, if type is SLANG_STRING_TYPE,
- * then @addr@ will contain the address of the string, i.e., char **.
- */
-
- void (*cl_destroy)_PROTO((unsigned char, VOID_STAR));
- /* Prototype: void destroy(unsigned type, VOID_STAR val)
- * Called to delete/free the object */
-
- char *(*cl_string)_PROTO((unsigned char, VOID_STAR));
- /* Prototype: char *to_string (unsigned char t, VOID_STAR p);
- * Here p is a pointer to the object for which a string representation
- * is to be returned. The returned pointer is to be a MALLOCED string.
- */
-
- /* Prototype: void push(unsigned char type, VOID_STAR v);
- * Push a copy of the object of type @type@ at address @v@ onto the
- * stack.
- */
- int (*cl_push)_PROTO((unsigned char, VOID_STAR));
-
- /* Prototype: int pop(unsigned char type, VOID_STAR v);
- * Pops value from stack and assign it to object, whose address is @v@.
- */
- int (*cl_pop)_PROTO((unsigned char, VOID_STAR));
-
- int (*cl_unary_op_result_type)_PROTO((int, unsigned char, unsigned char *));
- int (*cl_unary_op)_PROTO((int, unsigned char, VOID_STAR, unsigned int, VOID_STAR));
-
- int (*cl_app_unary_op_result_type)_PROTO((int, unsigned char, unsigned char *));
- int (*cl_app_unary_op)_PROTO((int, unsigned char, VOID_STAR, unsigned int, VOID_STAR));
-
- /* If this function is non-NULL, it will be called for sin, cos, etc... */
-#define SLMATH_SIN 1
-#define SLMATH_COS 2
-#define SLMATH_TAN 3
-#define SLMATH_ATAN 4
-#define SLMATH_ASIN 5
-#define SLMATH_ACOS 6
-#define SLMATH_EXP 7
-#define SLMATH_LOG 8
-#define SLMATH_SQRT 9
-#define SLMATH_LOG10 10
-#define SLMATH_REAL 11
-#define SLMATH_IMAG 12
-#define SLMATH_SINH 13
-#define SLMATH_COSH 14
-#define SLMATH_TANH 15
-#define SLMATH_ATANH 16
-#define SLMATH_ASINH 17
-#define SLMATH_ACOSH 18
-#define SLMATH_TODOUBLE 19
-#define SLMATH_CONJ 20
-
- int (*cl_math_op)_PROTO((int, unsigned char, VOID_STAR, unsigned int, VOID_STAR));
- int (*cl_math_op_result_type)_PROTO((int, unsigned char, unsigned char *));
-
- SL_OOBinary_Type *cl_binary_ops;
- SL_Typecast_Type *cl_typecast_funs;
-
- void (*cl_byte_code_destroy)_PROTO((unsigned char, VOID_STAR));
- void (*cl_user_destroy_fun)_PROTO((unsigned char, VOID_STAR));
- int (*cl_init_array_object)_PROTO((unsigned char, VOID_STAR));
- int (*cl_datatype_deref)_PROTO((unsigned char));
- SLang_Struct_Type *cl_struct_def;
- int (*cl_dereference) _PROTO((unsigned char, VOID_STAR));
- int (*cl_acopy) (unsigned char, VOID_STAR, VOID_STAR);
- int (*cl_apop) _PROTO((unsigned char, VOID_STAR));
- int (*cl_apush) _PROTO((unsigned char, VOID_STAR));
- int (*cl_push_literal) _PROTO((unsigned char, VOID_STAR));
- void (*cl_adestroy)_PROTO((unsigned char, VOID_STAR));
- int (*cl_push_intrinsic)_PROTO((unsigned char, VOID_STAR));
- int (*cl_void_typecast)_PROTO((unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR));
-
- int (*cl_anytype_typecast)_PROTO((unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR));
-
- /* Array access functions */
- int (*cl_aput) (unsigned char, unsigned int);
- int (*cl_aget) (unsigned char, unsigned int);
- int (*cl_anew) (unsigned char, unsigned int);
-
- /* length method */
- int (*cl_length) (unsigned char, VOID_STAR, unsigned int *);
-
- /* foreach */
- SLang_Foreach_Context_Type *(*cl_foreach_open) (unsigned char, unsigned int);
- void (*cl_foreach_close) (unsigned char, SLang_Foreach_Context_Type *);
- int (*cl_foreach) (unsigned char, SLang_Foreach_Context_Type *);
-
- /* Structure access: get and put (assign to) fields */
- int (*cl_sput) (unsigned char, char *);
- int (*cl_sget) (unsigned char, char *);
-
- /* File I/O */
- int (*cl_fread) (unsigned char, FILE *, VOID_STAR, unsigned int, unsigned int *);
- int (*cl_fwrite) (unsigned char, FILE *, VOID_STAR, unsigned int, unsigned int *);
- int (*cl_fdread) (unsigned char, int, VOID_STAR, unsigned int, unsigned int *);
- int (*cl_fdwrite) (unsigned char, int, VOID_STAR, unsigned int, unsigned int *);
-
- int (*cl_to_bool) (unsigned char, int *);
-
- int (*cl_cmp)(unsigned char, VOID_STAR, VOID_STAR, int *);
-
-} SLang_Class_Type;
-
-/* These are the low-level functions for building push/pop methods. They
- * know nothing about memory management. For SLANG_CLASS_TYPE_MMT, use the
- * MMT push/pop functions instead.
- */
-extern int SLclass_push_double_obj (unsigned char, double);
-extern int SLclass_push_float_obj (unsigned char, float);
-extern int SLclass_push_long_obj (unsigned char, long);
-extern int SLclass_push_int_obj (unsigned char, int);
-extern int SLclass_push_short_obj (unsigned char, short);
-extern int SLclass_push_char_obj (unsigned char, char);
-extern int SLclass_push_ptr_obj (unsigned char, VOID_STAR);
-extern int SLclass_pop_double_obj (unsigned char, double *);
-extern int SLclass_pop_float_obj (unsigned char, float *);
-extern int SLclass_pop_long_obj (unsigned char, long *);
-extern int SLclass_pop_int_obj (unsigned char, int *);
-extern int SLclass_pop_short_obj (unsigned char, short *);
-extern int SLclass_pop_char_obj (unsigned char, char *);
-extern int SLclass_pop_ptr_obj (unsigned char, VOID_STAR *);
-
-extern SLang_Class_Type *SLclass_allocate_class (char *);
-extern int SLclass_get_class_id (SLang_Class_Type *cl);
-extern int SLclass_create_synonym (char *, unsigned char);
-extern int SLclass_is_class_defined (unsigned char);
-
-extern int SLclass_register_class (SLang_Class_Type *, unsigned char, unsigned int, unsigned char);
-extern int SLclass_set_string_function (SLang_Class_Type *, char *(*)(unsigned char, VOID_STAR));
-extern int SLclass_set_destroy_function (SLang_Class_Type *, void (*)(unsigned char, VOID_STAR));
-extern int SLclass_set_push_function (SLang_Class_Type *, int (*)(unsigned char, VOID_STAR));
-extern int SLclass_set_pop_function (SLang_Class_Type *, int (*)(unsigned char, VOID_STAR));
-
-extern int SLclass_set_aget_function (SLang_Class_Type *, int (*)(unsigned char, unsigned int));
-extern int SLclass_set_aput_function (SLang_Class_Type *, int (*)(unsigned char, unsigned int));
-extern int SLclass_set_anew_function (SLang_Class_Type *, int (*)(unsigned char, unsigned int));
-
-extern int SLclass_set_sget_function (SLang_Class_Type *, int (*)(unsigned char, char *));
-extern int SLclass_set_sput_function (SLang_Class_Type *, int (*)(unsigned char, char *));
-
-/* Typecast object on the stack to type p1. p2 and p3 should be set to 1 */
-extern int SLclass_typecast (unsigned char, int, int);
-
-extern int SLclass_add_unary_op (unsigned char,
- int (*) (int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR),
- int (*) (int, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_app_unary_op (unsigned char,
- int (*) (int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR),
- int (*) (int, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_binary_op (unsigned char, unsigned char,
- int (*) (int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR),
- int (*) (int, unsigned char, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_math_op (unsigned char,
- int (*)(int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR),
- int (*)(int, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_typecast (unsigned char /* from */, unsigned char /* to */,
- int (*)_PROTO((unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR)),
- int /* allow implicit typecasts */
- );
-
-extern char *SLclass_get_datatype_name (unsigned char);
-
-extern double SLcomplex_abs (double *);
-extern double *SLcomplex_times (double *, double *, double *);
-extern double *SLcomplex_divide (double *, double *, double *);
-extern double *SLcomplex_sin (double *, double *);
-extern double *SLcomplex_cos (double *, double *);
-extern double *SLcomplex_tan (double *, double *);
-extern double *SLcomplex_asin (double *, double *);
-extern double *SLcomplex_acos (double *, double *);
-extern double *SLcomplex_atan (double *, double *);
-extern double *SLcomplex_exp (double *, double *);
-extern double *SLcomplex_log (double *, double *);
-extern double *SLcomplex_log10 (double *, double *);
-extern double *SLcomplex_sqrt (double *, double *);
-extern double *SLcomplex_sinh (double *, double *);
-extern double *SLcomplex_cosh (double *, double *);
-extern double *SLcomplex_tanh (double *, double *);
-extern double *SLcomplex_pow (double *, double *, double *);
-extern double SLmath_hypot (double x, double y);
-
-/* Not implemented yet */
-extern double *SLcomplex_asinh (double *, double *);
-extern double *SLcomplex_acosh (double *, double *);
-extern double *SLcomplex_atanh (double *, double *);
-
-#ifdef _SLANG_SOURCE_
-typedef struct _SLang_MMT_Type SLang_MMT_Type;
-#else
-typedef int SLang_MMT_Type;
-#endif
-
-extern void SLang_free_mmt (SLang_MMT_Type *);
-extern VOID_STAR SLang_object_from_mmt (SLang_MMT_Type *);
-extern SLang_MMT_Type *SLang_create_mmt (unsigned char, VOID_STAR);
-extern int SLang_push_mmt (SLang_MMT_Type *);
-extern SLang_MMT_Type *SLang_pop_mmt (unsigned char);
-extern void SLang_inc_mmt (SLang_MMT_Type *);
-
-/* Maximum number of dimensions of an array. */
-#define SLARRAY_MAX_DIMS 7
-typedef struct _SLang_Array_Type
-{
- unsigned char data_type;
- unsigned int sizeof_type;
- VOID_STAR data;
- unsigned int num_elements;
- unsigned int num_dims;
- int dims [SLARRAY_MAX_DIMS];
- VOID_STAR (*index_fun)_PROTO((struct _SLang_Array_Type *, int *));
- /* This function is designed to allow a type to store an array in
- * any manner it chooses. This function returns the address of the data
- * value at the specified index location.
- */
- unsigned int flags;
-#define SLARR_DATA_VALUE_IS_READ_ONLY 1
-#define SLARR_DATA_VALUE_IS_POINTER 2
-#define SLARR_DATA_VALUE_IS_RANGE 4
-#define SLARR_DATA_VALUE_IS_INTRINSIC 8
- SLang_Class_Type *cl;
- unsigned int num_refs;
-}
-SLang_Array_Type;
-
-extern int SLang_pop_array_of_type (SLang_Array_Type **, unsigned char);
-extern int SLang_pop_array (SLang_Array_Type **, int);
-extern int SLang_push_array (SLang_Array_Type *, int);
-extern void SLang_free_array (SLang_Array_Type *);
-extern SLang_Array_Type *SLang_create_array (unsigned char, int, VOID_STAR, int *, unsigned int);
-extern SLang_Array_Type *SLang_duplicate_array (SLang_Array_Type *);
-extern int SLang_get_array_element (SLang_Array_Type *, int *, VOID_STAR);
-extern int SLang_set_array_element (SLang_Array_Type *, int *, VOID_STAR);
-
-
-/*}}}*/
-
-/*{{{ Interpreter Function Prototypes */
-
- extern volatile int SLang_Error;
-/* Non zero if error occurs. Must be reset to zero to continue. */
-/* error codes, severe errors are less than 0 */
-#define SL_APPLICATION_ERROR -2
-#define SL_VARIABLE_UNINITIALIZED -3
-#define SL_INTERNAL_ERROR -5
-#define SL_STACK_OVERFLOW -6
-#define SL_STACK_UNDERFLOW -7
-#define SL_UNDEFINED_NAME -8
-#define SL_SYNTAX_ERROR -9
-#define SL_DUPLICATE_DEFINITION -10
-#define SL_TYPE_MISMATCH -11
-#define SL_OBJ_UNKNOWN -13
-#define SL_UNKNOWN_ERROR -14
-#define SL_TYPE_UNDEFINED_OP_ERROR -16
-
-#define SL_INTRINSIC_ERROR 1
-/* Intrinsic error is an error generated by intrinsic functions */
-#define SL_USER_BREAK 2
-#define SL_DIVIDE_ERROR 3
-#define SL_OBJ_NOPEN 4
-#define SL_USER_ERROR 5
-#define SL_USAGE_ERROR 6
-#define SL_READONLY_ERROR 7
-#define SL_INVALID_PARM 8
-#define SL_NOT_IMPLEMENTED 9
-#define SL_MALLOC_ERROR 10
-#define SL_OVERFLOW 11
-#define SL_FLOATING_EXCEPTION 12
-
-/* Compatibility */
-#define USER_BREAK SL_USER_BREAK
-#define INTRINSIC_ERROR SL_INTRINSIC_ERROR
-
- extern int SLang_Traceback;
- /* If non-zero, dump an S-Lang traceback upon error. Available as
- _traceback in S-Lang. */
-
- extern char *SLang_User_Prompt;
- /* Prompt to use when reading from stdin */
- extern int SLang_Version;
- extern char *SLang_Version_String;
-extern char *SLang_Doc_Dir;
-
-extern void (*SLang_VMessage_Hook) (char *, va_list);
-extern void SLang_vmessage (char *, ...);
-
- extern void (*SLang_Error_Hook)(char *);
- /* Pointer to application dependent error messaging routine. By default,
- messages are displayed on stderr. */
-
- extern void (*SLang_Exit_Error_Hook)(char *, va_list);
- extern void SLang_exit_error (char *, ...);
- extern void (*SLang_Dump_Routine)(char *);
- /* Called if S-Lang traceback is enabled as well as other debugging
- routines (e.g., trace). By default, these messages go to stderr. */
-
- extern void (*SLang_Interrupt)(void);
- /* function to call whenever inner interpreter is entered. This is
- a good place to set SLang_Error to USER_BREAK. */
-
- extern void (*SLang_User_Clear_Error)(void);
- /* function that gets called when '_clear_error' is called. */
-
- /* If non null, these call C functions before and after a slang function. */
- extern void (*SLang_Enter_Function)(char *);
-extern void (*SLang_Exit_Function)(char *);
-
-extern int SLang_Num_Function_Args;
-
-/* Functions: */
-
-extern int SLang_init_all (void);
-/* Initializes interpreter and all modules */
-
-extern int SLang_init_slang (void);
-/* This function is mandatory and must be called by all applications that
- * use the interpreter
- */
-extern int SLang_init_posix_process (void); /* process specific intrinsics */
-extern int SLang_init_stdio (void); /* fgets, etc. stdio functions */
-extern int SLang_init_posix_dir (void);
-extern int SLang_init_ospath (void);
-
-extern int SLang_init_slmath (void);
-/* called if math functions sin, cos, etc... are needed. */
-
- extern int SLang_init_slfile (void);
- extern int SLang_init_slunix (void);
- /* These functions are obsolte. Use init_stdio, posix_process, etc. */
-
-extern int SLang_init_slassoc (void);
-/* Assoc Arrays (Hashes) */
-
-extern int SLang_init_array (void);
-/* Additional arrays functions: transpose, etc... */
-
-/* Dynamic linking facility */
-extern int SLang_init_import (void);
-
- extern int SLang_load_file (char *);
- /* Load a file of S-Lang code for interpreting. If the parameter is
- * NULL, input comes from stdin. */
-
- extern void SLang_restart(int);
- /* should be called if an error occurs. If the passed integer is
- * non-zero, items are popped off the stack; otherwise, the stack is
- * left intact. Any time the stack is believed to be trashed, this routine
- * should be called with a non-zero argument (e.g., if setjmp/longjmp is
- * called). */
-
- extern int SLang_byte_compile_file(char *, int);
- /* takes a file of S-Lang code and ``byte-compiles'' it for faster
- * loading. The new filename is equivalent to the old except that a `c' is
- * appended to the name. (e.g., init.sl --> init.slc). The second
- * specified the method; currently, it is not used.
- */
-
- extern int SLang_autoload(char *, char *);
- /* Automatically load S-Lang function p1 from file p2. This function
- is also available via S-Lang */
-
- extern int SLang_load_string(char *);
- /* Like SLang_load_file except input is from a null terminated string. */
-
- extern int SLdo_pop(void);
- /* pops item off stack and frees any memory associated with it */
- extern int SLdo_pop_n(unsigned int);
- /* pops n items off stack and frees any memory associated with them */
-
-extern int SLang_pop_integer(int *);
-extern int SLang_pop_uinteger(unsigned int *);
- /* pops integer *p0 from the stack. Returns 0 upon success and non-zero
- * if the stack is empty or a type mismatch occurs, setting SLang_Error.
- */
-extern int SLang_pop_char (char *);
-extern int SLang_pop_uchar (unsigned char *);
-extern int SLang_pop_short(short *);
-extern int SLang_pop_ushort(unsigned short *);
-extern int SLang_pop_long(long *);
-extern int SLang_pop_ulong(unsigned long *);
-
-extern int SLang_pop_float(float *);
-extern int SLang_pop_double(double *, int *, int *);
- /* Pops double *p1 from stack. If *p3 is non-zero, *p1 was derived
- from the integer *p2. Returns zero upon success. */
-
- extern int SLang_pop_complex (double *, double *);
-
- extern int SLpop_string (char **);
- extern int SLang_pop_string(char **, int *);
- /* pops string *p0 from stack. If *p1 is non-zero, the string must be
- * freed after its use. DO NOT FREE p0 if *p1 IS ZERO! Returns 0 upon
- * success */
-
- extern int SLang_push_complex (double, double);
-
- extern int SLang_push_char (char);
- extern int SLang_push_uchar (unsigned char);
-
- extern int SLang_push_integer(int);
- extern int SLang_push_uinteger(unsigned int);
- /* push integer p1 on stack */
-
- extern int SLang_push_short(short);
- extern int SLang_push_ushort(unsigned short);
- extern int SLang_push_long(long);
- extern int SLang_push_ulong(unsigned long);
- extern int SLang_push_float(float);
- extern int SLang_push_double(double);
- /* Push double onto stack */
-
- extern int SLang_push_string(char *);
- /* Push string p1 onto stack */
-
- extern int SLang_push_malloced_string(char *);
- /* The normal SLang_push_string pushes an slstring. This one converts
- * a normally malloced string to an slstring, and then frees the
- * malloced string. So, do NOT use the malloced string after calling
- * this routine because it will be freed! The routine returns -1 upon
- * error, but the string will be freed.
- */
-
-extern int SLang_push_null (void);
-extern int SLang_pop_null (void);
-
-extern int SLang_push_value (unsigned char type, VOID_STAR);
-extern int SLang_pop_value (unsigned char type, VOID_STAR);
-extern void SLang_free_value (unsigned char type, VOID_STAR);
-
-typedef struct _SLang_Object_Type SLang_Any_Type;
-
-extern int SLang_pop_anytype (SLang_Any_Type **);
-extern int SLang_push_anytype (SLang_Any_Type *);
-extern void SLang_free_anytype (SLang_Any_Type *);
-
-#ifdef _SLANG_SOURCE_
-typedef struct _SLang_Ref_Type SLang_Ref_Type;
-#else
-typedef int SLang_Ref_Type;
-#endif
-
-extern int SLang_pop_ref (SLang_Ref_Type **);
-extern void SLang_free_ref (SLang_Ref_Type *);
-extern int SLang_assign_to_ref (SLang_Ref_Type *, unsigned char, VOID_STAR);
-extern SLang_Name_Type *SLang_pop_function (void);
-extern SLang_Name_Type *SLang_get_fun_from_ref (SLang_Ref_Type *);
-extern void SLang_free_function (SLang_Name_Type *f);
-
- extern int SLang_is_defined(char *);
- /* Return non-zero is p1 is defined otherwise returns 0. */
-
- extern int SLang_run_hooks(char *, unsigned int, ...);
- /* calls S-Lang function p1 pushing p2 strings in the variable argument
- * list onto the stack first.
- * Returns -1 upon error, 1 if hooks exists and it ran,
- * or 0 if hook does not exist. Thus it returns non-zero is hook was called.
- */
-
-/* These functions return 1 if the indicated function exists and the function
- * runs without error. If the function does not exist, the function returns
- * 0. Otherwise -1 is returned with SLang_Error set appropriately.
- */
-extern int SLexecute_function (SLang_Name_Type *);
-extern int SLang_execute_function(char *);
-
-
-extern int SLang_end_arg_list (void);
-extern int SLang_start_arg_list (void);
-
-extern void SLang_verror (int, char *, ...);
-
-extern void SLang_doerror(char *);
- /* set SLang_Error and display p1 as error message */
-
-extern int SLang_add_intrinsic_array (char *, /* name */
- unsigned char, /* type */
- int, /* readonly */
- VOID_STAR, /* data */
- unsigned int, ...); /* num dims */
-
-extern int SLextract_list_element (char *, unsigned int, char,
- char *, unsigned int);
-
-extern void SLexpand_escaped_string (register char *, register char *,
- register char *);
-
-extern SLang_Name_Type *SLang_get_function (char *);
-extern void SLang_release_function (SLang_Name_Type *);
-
-extern int SLreverse_stack (int);
-extern int SLroll_stack (int);
-/* If argument p is positive, the top p objects on the stack are rolled
- * up. If negative, the stack is rolled down.
- */
-extern int SLdup_n (int n);
-/* Duplicate top n elements of stack */
-
-extern int SLang_peek_at_stack1 (void);
-extern int SLang_peek_at_stack (void);
-/* Returns type of next object on stack-- -1 upon stack underflow. */
-extern void SLmake_lut (unsigned char *, unsigned char *, unsigned char);
-
- extern int SLang_guess_type (char *);
-
-extern int SLstruct_create_struct (unsigned int,
- char **,
- unsigned char *,
- VOID_STAR *);
-
-/*}}}*/
-
-/*{{{ Misc Functions */
-
-/* This is an interface to atexit */
-extern int SLang_add_cleanup_function (void (*)(void));
-
-extern char *SLmake_string (char *);
-extern char *SLmake_nstring (char *, unsigned int);
-/* Returns a null terminated string made from the first n characters of the
- * string.
- */
-
-/* The string created by this routine must be freed by SLang_free_slstring
- * and nothing else!! Also these strings must not be modified. Use
- * SLmake_string if you intend to modify them!!
- */
-extern char *SLang_create_nslstring (char *, unsigned int);
-extern char *SLang_create_slstring (char *);
-extern void SLang_free_slstring (char *); /* handles NULL */
-extern int SLang_pop_slstring (char **); /* free with SLang_free_slstring */
-extern char *SLang_concat_slstrings (char *a, char *b);
-extern char *SLang_create_static_slstring (char *); /* adds a string that will not get deleted */
-extern void SLstring_dump_stats (void);
-
-/* Binary strings */
-/* The binary string is an opaque type. Use the SLbstring_get_pointer function
- * to get a pointer and length.
- */
-typedef struct _SLang_BString_Type SLang_BString_Type;
-extern unsigned char *SLbstring_get_pointer (SLang_BString_Type *, unsigned int *);
-
-extern SLang_BString_Type *SLbstring_dup (SLang_BString_Type *);
-extern SLang_BString_Type *SLbstring_create (unsigned char *, unsigned int);
-
-/* The create_malloced function used the first argument which is assumed
- * to be a pointer to a len + 1 malloced string. The extra byte is for
- * \0 termination.
- */
-extern SLang_BString_Type *SLbstring_create_malloced (unsigned char *, unsigned int, int);
-
-/* Create a bstring from an slstring */
-extern SLang_BString_Type *SLbstring_create_slstring (char *);
-
-extern void SLbstring_free (SLang_BString_Type *);
-extern int SLang_pop_bstring (SLang_BString_Type **);
-extern int SLang_push_bstring (SLang_BString_Type *);
-
-extern char *SLmalloc (unsigned int);
-extern char *SLcalloc (unsigned int, unsigned int);
-extern void SLfree(char *); /* This function handles NULL */
-extern char *SLrealloc (char *, unsigned int);
-
-extern char *SLcurrent_time_string (void);
-
-extern int SLatoi(unsigned char *);
-extern long SLatol (unsigned char *);
-extern unsigned long SLatoul (unsigned char *);
-
-extern int SLang_pop_fileptr (SLang_MMT_Type **, FILE **);
-extern char *SLang_get_name_from_fileptr (SLang_MMT_Type *);
-
-typedef struct _SLFile_FD_Type SLFile_FD_Type;
-extern SLFile_FD_Type *SLfile_create_fd (char *, int);
-extern void SLfile_free_fd (SLFile_FD_Type *);
-extern int SLfile_push_fd (SLFile_FD_Type *);
-extern int SLfile_pop_fd (SLFile_FD_Type **);
-extern int SLfile_get_fd (SLFile_FD_Type *, int *);
-extern SLFile_FD_Type *SLfile_dup_fd (SLFile_FD_Type *f0);
-extern int SLang_init_posix_io (void);
-
-typedef double (*SLang_To_Double_Fun_Type)(VOID_STAR);
-extern SLang_To_Double_Fun_Type SLarith_get_to_double_fun (unsigned char, unsigned int *);
-
-extern int SLang_set_argc_argv (int, char **);
-
-/*}}}*/
-
-/*{{{ SLang getkey interface Functions */
-
-#ifdef REAL_UNIX_SYSTEM
-extern int SLang_TT_Baud_Rate;
-extern int SLang_TT_Read_FD;
-#endif
-
-extern int SLang_init_tty (int, int, int);
-/* Initializes the tty for single character input. If the first parameter *p1
- * is in the range 0-255, it will be used for the abort character;
- * otherwise, (unix only) if it is -1, the abort character will be the one
- * used by the terminal. If the second parameter p2 is non-zero, flow
- * control is enabled. If the last parmeter p3 is zero, output processing
- * is NOT turned on. A value of zero is required for the screen management
- * routines. Returns 0 upon success. In addition, if SLang_TT_Baud_Rate ==
- * 0 when this function is called, SLang will attempt to determine the
- * terminals baud rate. As far as the SLang library is concerned, if
- * SLang_TT_Baud_Rate is less than or equal to zero, the baud rate is
- * effectively infinite.
- */
-
-extern void SLang_reset_tty (void);
-/* Resets tty to what it was prior to a call to SLang_init_tty */
-#ifdef REAL_UNIX_SYSTEM
-extern void SLtty_set_suspend_state (int);
- /* If non-zero argument, terminal driver will be told to react to the
- * suspend character. If 0, it will not.
- */
-extern int (*SLang_getkey_intr_hook) (void);
-#endif
-
-#define SLANG_GETKEY_ERROR 0xFFFF
-extern unsigned int SLang_getkey (void);
-/* reads a single key from the tty. If the read fails, 0xFFFF is returned. */
-
-#ifdef IBMPC_SYSTEM
-extern int SLgetkey_map_to_ansi (int);
-#endif
-
-extern int SLang_ungetkey_string (unsigned char *, unsigned int);
-extern int SLang_buffer_keystring (unsigned char *, unsigned int);
-extern int SLang_ungetkey (unsigned char);
-extern void SLang_flush_input (void);
-extern int SLang_input_pending (int);
-extern int SLang_Abort_Char;
-/* The value of the character (0-255) used to trigger SIGINT */
-extern int SLang_Ignore_User_Abort;
-/* If non-zero, pressing the abort character will not result in USER_BREAK
- * SLang_Error. */
-
-extern int SLang_set_abort_signal (void (*)(int));
-/* If SIGINT is generated, the function p1 will be called. If p1 is NULL
- * the SLang_default signal handler is called. This sets SLang_Error to
- * USER_BREAK. I suspect most users will simply want to pass NULL.
- */
-extern unsigned int SLang_Input_Buffer_Len;
-
-extern volatile int SLKeyBoard_Quit;
-
-#ifdef VMS
-/* If this function returns -1, ^Y will be added to input buffer. */
-extern int (*SLtty_VMS_Ctrl_Y_Hook) (void);
-#endif
-/*}}}*/
-
-/*{{{ SLang Keymap routines */
-
-typedef struct SLKeymap_Function_Type
-{
- char *name;
- int (*f)(void);
-}
-SLKeymap_Function_Type;
-
-#define SLANG_MAX_KEYMAP_KEY_SEQ 14
-typedef struct SLang_Key_Type
-{
- struct SLang_Key_Type *next;
- union
- {
- char *s;
- FVOID_STAR f;
- unsigned int keysym;
- }
- f;
- unsigned char type; /* type of function */
-#define SLKEY_F_INTERPRET 0x01
-#define SLKEY_F_INTRINSIC 0x02
-#define SLKEY_F_KEYSYM 0x03
- unsigned char str[SLANG_MAX_KEYMAP_KEY_SEQ + 1];/* key sequence */
-}
-SLang_Key_Type;
-
-typedef struct SLKeyMap_List_Type
-{
- char *name; /* hashed string */
- SLang_Key_Type *keymap;
- SLKeymap_Function_Type *functions; /* intrinsic functions */
-}
-SLKeyMap_List_Type;
-
-/* This is arbitrary but I have got to start somewhere */
-#define SLANG_MAX_KEYMAPS 30
-extern SLKeyMap_List_Type SLKeyMap_List[SLANG_MAX_KEYMAPS];
-
-extern char *SLang_process_keystring(char *);
-
-extern int SLkm_define_key (char *, FVOID_STAR, SLKeyMap_List_Type *);
-
-extern int SLang_define_key(char *, char *, SLKeyMap_List_Type *);
-/* Like define_key1 except that p2 is a string that is to be associated with
- * a function in the functions field of p3. This routine calls define_key1.
- */
-
-extern int SLkm_define_keysym (char *, unsigned int, SLKeyMap_List_Type *);
-
-extern void SLang_undefine_key(char *, SLKeyMap_List_Type *);
-
-extern SLKeyMap_List_Type *SLang_create_keymap(char *, SLKeyMap_List_Type *);
-/* create and returns a pointer to a new keymap named p1 created by copying
- * keymap p2. If p2 is NULL, it is up to the calling routine to initialize
- * the keymap.
- */
-
-extern char *SLang_make_keystring(unsigned char *);
-
-extern SLang_Key_Type *SLang_do_key(SLKeyMap_List_Type *, int (*)(void));
-/* read a key using keymap p1 with getkey function p2 */
-
-extern
- FVOID_STAR
- SLang_find_key_function(char *, SLKeyMap_List_Type *);
-
-extern SLKeyMap_List_Type *SLang_find_keymap(char *);
-
-extern int SLang_Last_Key_Char;
-extern int SLang_Key_TimeOut_Flag;
-
-/*}}}*/
-
-/*{{{ SLang Readline Interface */
-
-typedef struct SLang_Read_Line_Type
-{
- struct SLang_Read_Line_Type *prev, *next;
- unsigned char *buf;
- int buf_len; /* number of chars in the buffer */
- int num; /* num and misc are application specific*/
- int misc;
-} SLang_Read_Line_Type;
-
-/* Maximum size of display */
-#define SLRL_DISPLAY_BUFFER_SIZE 256
-
-typedef struct
-{
- SLang_Read_Line_Type *root, *tail, *last;
- unsigned char *buf; /* edit buffer */
- int buf_len; /* sizeof buffer */
- int point; /* current editing point */
- int tab; /* tab width */
- int len; /* current line size */
-
- /* display variables */
- int edit_width; /* length of display field */
- int curs_pos; /* current column */
- int start_column; /* column offset of display */
- int dhscroll; /* amount to use for horiz scroll */
- char *prompt;
-
- FVOID_STAR last_fun; /* last function executed by rl */
-
- /* These two contain an image of what is on the display */
- unsigned char upd_buf1[SLRL_DISPLAY_BUFFER_SIZE];
- unsigned char upd_buf2[SLRL_DISPLAY_BUFFER_SIZE];
- unsigned char *old_upd, *new_upd; /* pointers to previous two buffers */
- int new_upd_len, old_upd_len; /* length of output buffers */
-
- SLKeyMap_List_Type *keymap;
-
- /* tty variables */
- unsigned int flags; /* */
-#define SL_RLINE_NO_ECHO 1
-#define SL_RLINE_USE_ANSI 2
-#define SL_RLINE_BLINK_MATCH 4
- unsigned int (*getkey)(void); /* getkey function -- required */
- void (*tt_goto_column)(int);
- void (*tt_insert)(char);
- void (*update_hook)(unsigned char *, int, int);
- /* The update hook is called with a pointer to a buffer p1 that contains
- * an image of what the update hook is suppoed to produce. The length
- * of the buffer is p2 and after the update, the cursor is to be placed
- * in column p3.
- */
- /* This function is only called when blinking matches */
- int (*input_pending)(int);
- unsigned long reserved[4];
-} SLang_RLine_Info_Type;
-
-extern int SLang_RL_EOF_Char;
-
-extern SLang_Read_Line_Type * SLang_rline_save_line (SLang_RLine_Info_Type *);
-extern int SLang_init_readline (SLang_RLine_Info_Type *);
-extern int SLang_read_line (SLang_RLine_Info_Type *);
-extern int SLang_rline_insert (char *);
-extern void SLrline_redraw (SLang_RLine_Info_Type *);
-extern int SLang_Rline_Quit;
-
-/*}}}*/
-
-/*{{{ Low Level Screen Output Interface */
-
-extern unsigned long SLtt_Num_Chars_Output;
-extern int SLtt_Baud_Rate;
-
-typedef unsigned long SLtt_Char_Type;
-
-#define SLTT_BOLD_MASK 0x01000000UL
-#define SLTT_BLINK_MASK 0x02000000UL
-#define SLTT_ULINE_MASK 0x04000000UL
-#define SLTT_REV_MASK 0x08000000UL
-#define SLTT_ALTC_MASK 0x10000000UL
-
-extern int SLtt_Screen_Rows;
-extern int SLtt_Screen_Cols;
-extern int SLtt_Term_Cannot_Insert;
-extern int SLtt_Term_Cannot_Scroll;
-extern int SLtt_Use_Ansi_Colors;
-extern int SLtt_Ignore_Beep;
-#if defined(REAL_UNIX_SYSTEM)
-extern int SLtt_Force_Keypad_Init;
-extern int SLang_TT_Write_FD;
-#endif
-
-#ifndef IBMPC_SYSTEM
-extern char *SLtt_Graphics_Char_Pairs;
-#endif
-
-#ifndef __GO32__
-#if defined(VMS) || defined(REAL_UNIX_SYSTEM)
-extern int SLtt_Blink_Mode;
-extern int SLtt_Use_Blink_For_ACS;
-extern int SLtt_Newline_Ok;
-extern int SLtt_Has_Alt_Charset;
-extern int SLtt_Has_Status_Line; /* if 0, NO. If > 0, YES, IF -1, ?? */
-# ifndef VMS
-extern int SLtt_Try_Termcap;
-# endif
-#endif
-#endif
-
-#if defined(IBMPC_SYSTEM)
-extern int SLtt_Msdos_Cheap_Video;
-#endif
-
-typedef unsigned short SLsmg_Char_Type;
-#define SLSMG_EXTRACT_CHAR(x) ((x) & 0xFF)
-#define SLSMG_EXTRACT_COLOR(x) (((x)>>8)&0xFF)
-#define SLSMG_BUILD_CHAR(ch,color) (((SLsmg_Char_Type)(unsigned char)(ch))|((color)<<8))
-
-extern int SLtt_flush_output (void);
-extern void SLtt_set_scroll_region(int, int);
-extern void SLtt_reset_scroll_region(void);
-extern void SLtt_reverse_video (int);
-extern void SLtt_bold_video (void);
-extern void SLtt_begin_insert(void);
-extern void SLtt_end_insert(void);
-extern void SLtt_del_eol(void);
-extern void SLtt_goto_rc (int, int);
-extern void SLtt_delete_nlines(int);
-extern void SLtt_delete_char(void);
-extern void SLtt_erase_line(void);
-extern void SLtt_normal_video(void);
-extern void SLtt_cls(void);
-extern void SLtt_beep(void);
-extern void SLtt_reverse_index(int);
-extern void SLtt_smart_puts(SLsmg_Char_Type *, SLsmg_Char_Type *, int, int);
-extern void SLtt_write_string (char *);
-extern void SLtt_putchar(char);
-extern int SLtt_init_video (void);
-extern int SLtt_reset_video (void);
-extern void SLtt_get_terminfo(void);
-extern void SLtt_get_screen_size (void);
-extern int SLtt_set_cursor_visibility (int);
-
-extern int SLtt_set_mouse_mode (int, int);
-
-#if defined(VMS) || defined(REAL_UNIX_SYSTEM)
-extern int SLtt_initialize (char *);
-extern void SLtt_enable_cursor_keys(void);
-extern void SLtt_set_term_vtxxx(int *);
-extern void SLtt_set_color_esc (int, char *);
-extern void SLtt_wide_width(void);
-extern void SLtt_narrow_width(void);
-extern void SLtt_set_alt_char_set (int);
-extern int SLtt_write_to_status_line (char *, int);
-extern void SLtt_disable_status_line (void);
-# ifdef REAL_UNIX_SYSTEM
-/* These are termcap/terminfo routines that assume SLtt_initialize has
- * been called.
- */
-extern char *SLtt_tgetstr (char *);
-extern int SLtt_tgetnum (char *);
-extern int SLtt_tgetflag (char *);
-
-/* The following are terminfo-only routines -- these prototypes will change
- * in V2.x.
- */
-extern char *SLtt_tigetent (char *);
-extern char *SLtt_tigetstr (char *, char **);
-extern int SLtt_tigetnum (char *, char **);
-# endif
-#endif
-
-extern SLtt_Char_Type SLtt_get_color_object (int);
-extern void SLtt_set_color_object (int, SLtt_Char_Type);
-extern void SLtt_set_color (int, char *, char *, char *);
-extern void SLtt_set_mono (int, char *, SLtt_Char_Type);
-extern void SLtt_add_color_attribute (int, SLtt_Char_Type);
-extern void SLtt_set_color_fgbg (int, SLtt_Char_Type, SLtt_Char_Type);
-
-/*}}}*/
-
-/*{{{ SLang Preprocessor Interface */
-
-typedef struct
-{
- int this_level;
- int exec_level;
- int prev_exec_level;
- char preprocess_char;
- char comment_char;
- unsigned char flags;
-#define SLPREP_BLANK_LINES_OK 1
-#define SLPREP_COMMENT_LINES_OK 2
-}
-SLPreprocess_Type;
-
-extern int SLprep_open_prep (SLPreprocess_Type *);
-extern void SLprep_close_prep (SLPreprocess_Type *);
-extern int SLprep_line_ok (char *, SLPreprocess_Type *);
- extern int SLdefine_for_ifdef (char *);
- /* Adds a string to the SLang #ifdef preparsing defines. SLang already
- defines MSDOS, UNIX, and VMS on the appropriate system. */
-extern int (*SLprep_exists_hook) (char *, char);
-
-/*}}}*/
-
-/*{{{ SLsmg Screen Management Functions */
-
-extern void SLsmg_fill_region (int, int, unsigned int, unsigned int, unsigned char);
-extern void SLsmg_set_char_set (int);
-#ifndef IBMPC_SYSTEM
-extern int SLsmg_Scroll_Hash_Border;
-#endif
-extern int SLsmg_suspend_smg (void);
-extern int SLsmg_resume_smg (void);
-extern void SLsmg_erase_eol (void);
-extern void SLsmg_gotorc (int, int);
-extern void SLsmg_erase_eos (void);
-extern void SLsmg_reverse_video (void);
-extern void SLsmg_set_color (int);
-extern void SLsmg_normal_video (void);
-extern void SLsmg_printf (char *, ...);
-extern void SLsmg_vprintf (char *, va_list);
-extern void SLsmg_write_string (char *);
-extern void SLsmg_write_nstring (char *, unsigned int);
-extern void SLsmg_write_char (char);
-extern void SLsmg_write_nchars (char *, unsigned int);
-extern void SLsmg_write_wrapped_string (char *, int, int, unsigned int, unsigned int, int);
-extern void SLsmg_cls (void);
-extern void SLsmg_refresh (void);
-extern void SLsmg_touch_lines (int, unsigned int);
-extern void SLsmg_touch_screen (void);
-extern int SLsmg_init_smg (void);
-extern int SLsmg_reinit_smg (void);
-extern void SLsmg_reset_smg (void);
-extern SLsmg_Char_Type SLsmg_char_at(void);
-extern void SLsmg_set_screen_start (int *, int *);
-extern void SLsmg_draw_hline (unsigned int);
-extern void SLsmg_draw_vline (int);
-extern void SLsmg_draw_object (int, int, unsigned char);
-extern void SLsmg_draw_box (int, int, unsigned int, unsigned int);
-extern int SLsmg_get_column(void);
-extern int SLsmg_get_row(void);
-extern void SLsmg_forward (int);
-extern void SLsmg_write_color_chars (SLsmg_Char_Type *, unsigned int);
-extern unsigned int SLsmg_read_raw (SLsmg_Char_Type *, unsigned int);
-extern unsigned int SLsmg_write_raw (SLsmg_Char_Type *, unsigned int);
-extern void SLsmg_set_color_in_region (int, int, int, unsigned int, unsigned int);
-extern int SLsmg_Display_Eight_Bit;
-extern int SLsmg_Tab_Width;
-
-#define SLSMG_NEWLINE_IGNORED 0 /* default */
-#define SLSMG_NEWLINE_MOVES 1 /* moves to next line, column 0 */
-#define SLSMG_NEWLINE_SCROLLS 2 /* moves but scrolls at bottom of screen */
-#define SLSMG_NEWLINE_PRINTABLE 3 /* prints as ^J */
-extern int SLsmg_Newline_Behavior;
-
-extern int SLsmg_Backspace_Moves;
-
-#ifdef IBMPC_SYSTEM
-# define SLSMG_HLINE_CHAR 0xC4
-# define SLSMG_VLINE_CHAR 0xB3
-# define SLSMG_ULCORN_CHAR 0xDA
-# define SLSMG_URCORN_CHAR 0xBF
-# define SLSMG_LLCORN_CHAR 0xC0
-# define SLSMG_LRCORN_CHAR 0xD9
-# define SLSMG_RTEE_CHAR 0xB4
-# define SLSMG_LTEE_CHAR 0xC3
-# define SLSMG_UTEE_CHAR 0xC2
-# define SLSMG_DTEE_CHAR 0xC1
-# define SLSMG_PLUS_CHAR 0xC5
-/* There are several to choose from: 0xB0, 0xB1, and 0xB2 */
-# define SLSMG_CKBRD_CHAR 0xB0
-# define SLSMG_DIAMOND_CHAR 0x04
-# define SLSMG_DEGREE_CHAR 0xF8
-# define SLSMG_PLMINUS_CHAR 0xF1
-# define SLSMG_BULLET_CHAR 0xF9
-# define SLSMG_LARROW_CHAR 0x1B
-# define SLSMG_RARROW_CHAR 0x1A
-# define SLSMG_DARROW_CHAR 0x19
-# define SLSMG_UARROW_CHAR 0x18
-# define SLSMG_BOARD_CHAR 0xB2
-# define SLSMG_BLOCK_CHAR 0xDB
-#else
-# if defined(AMIGA)
-# define SLSMG_HLINE_CHAR '-'
-# define SLSMG_VLINE_CHAR '|'
-# define SLSMG_ULCORN_CHAR '+'
-# define SLSMG_URCORN_CHAR '+'
-# define SLSMG_LLCORN_CHAR '+'
-# define SLSMG_LRCORN_CHAR '+'
-# define SLSMG_CKBRD_CHAR '#'
-# define SLSMG_RTEE_CHAR '+'
-# define SLSMG_LTEE_CHAR '+'
-# define SLSMG_UTEE_CHAR '+'
-# define SLSMG_DTEE_CHAR '+'
-# define SLSMG_PLUS_CHAR '+'
-# define SLSMG_DIAMOND_CHAR '+'
-# define SLSMG_DEGREE_CHAR '\\'
-# define SLSMG_PLMINUS_CHAR '#'
-# define SLSMG_BULLET_CHAR 'o'
-# define SLSMG_LARROW_CHAR '<'
-# define SLSMG_RARROW_CHAR '>'
-# define SLSMG_DARROW_CHAR 'v'
-# define SLSMG_UARROW_CHAR '^'
-# define SLSMG_BOARD_CHAR '#'
-# define SLSMG_BLOCK_CHAR '#'
-# else
-# define SLSMG_HLINE_CHAR 'q'
-# define SLSMG_VLINE_CHAR 'x'
-# define SLSMG_ULCORN_CHAR 'l'
-# define SLSMG_URCORN_CHAR 'k'
-# define SLSMG_LLCORN_CHAR 'm'
-# define SLSMG_LRCORN_CHAR 'j'
-# define SLSMG_CKBRD_CHAR 'a'
-# define SLSMG_RTEE_CHAR 'u'
-# define SLSMG_LTEE_CHAR 't'
-# define SLSMG_UTEE_CHAR 'w'
-# define SLSMG_DTEE_CHAR 'v'
-# define SLSMG_PLUS_CHAR 'n'
-# define SLSMG_DIAMOND_CHAR '`'
-# define SLSMG_DEGREE_CHAR 'f'
-# define SLSMG_PLMINUS_CHAR 'g'
-# define SLSMG_BULLET_CHAR '~'
-# define SLSMG_LARROW_CHAR ','
-# define SLSMG_RARROW_CHAR '+'
-# define SLSMG_DARROW_CHAR '.'
-# define SLSMG_UARROW_CHAR '-'
-# define SLSMG_BOARD_CHAR 'h'
-# define SLSMG_BLOCK_CHAR '0'
-# endif /* AMIGA */
-#endif /* IBMPC_SYSTEM */
-
-#ifndef IBMPC_SYSTEM
-# define SLSMG_COLOR_BLACK 0x000000
-# define SLSMG_COLOR_RED 0x000001
-# define SLSMG_COLOR_GREEN 0x000002
-# define SLSMG_COLOR_BROWN 0x000003
-# define SLSMG_COLOR_BLUE 0x000004
-# define SLSMG_COLOR_MAGENTA 0x000005
-# define SLSMG_COLOR_CYAN 0x000006
-# define SLSMG_COLOR_LGRAY 0x000007
-# define SLSMG_COLOR_GRAY 0x000008
-# define SLSMG_COLOR_BRIGHT_RED 0x000009
-# define SLSMG_COLOR_BRIGHT_GREEN 0x00000A
-# define SLSMG_COLOR_BRIGHT_BROWN 0x00000B
-# define SLSMG_COLOR_BRIGHT_BLUE 0x00000C
-# define SLSMG_COLOR_BRIGHT_CYAN 0x00000D
-# define SLSMG_COLOR_BRIGHT_MAGENTA 0x00000E
-# define SLSMG_COLOR_BRIGHT_WHITE 0x00000F
-#endif
-
-typedef struct
-{
- void (*tt_normal_video)(void);
- void (*tt_set_scroll_region)(int, int);
- void (*tt_goto_rc)(int, int);
- void (*tt_reverse_index)(int);
- void (*tt_reset_scroll_region)(void);
- void (*tt_delete_nlines)(int);
- void (*tt_cls) (void);
- void (*tt_del_eol) (void);
- void (*tt_smart_puts) (SLsmg_Char_Type *, SLsmg_Char_Type *, int, int);
- int (*tt_flush_output) (void);
- int (*tt_reset_video) (void);
- int (*tt_init_video) (void);
-
- int *tt_screen_rows;
- int *tt_screen_cols;
-
- int *tt_term_cannot_scroll;
- int *tt_has_alt_charset;
- int *tt_use_blink_for_acs;
- char **tt_graphic_char_pairs;
-
- long reserved[4];
-}
-SLsmg_Term_Type;
-extern void SLsmg_set_terminal_info (SLsmg_Term_Type *);
-
-/*}}}*/
-
-/*{{{ SLang Keypad Interface */
-
-#define SL_KEY_ERR 0xFFFF
-
-#define SL_KEY_UP 0x101
-#define SL_KEY_DOWN 0x102
-#define SL_KEY_LEFT 0x103
-#define SL_KEY_RIGHT 0x104
-#define SL_KEY_PPAGE 0x105
-#define SL_KEY_NPAGE 0x106
-#define SL_KEY_HOME 0x107
-#define SL_KEY_END 0x108
-#define SL_KEY_A1 0x109
-#define SL_KEY_A3 0x10A
-#define SL_KEY_B2 0x10B
-#define SL_KEY_C1 0x10C
-#define SL_KEY_C3 0x10D
-#define SL_KEY_REDO 0x10E
-#define SL_KEY_UNDO 0x10F
-#define SL_KEY_BACKSPACE 0x110
-#define SL_KEY_ENTER 0x111
-#define SL_KEY_IC 0x112
-#define SL_KEY_DELETE 0x113
-
-#define SL_KEY_F0 0x200
-#define SL_KEY_F(X) (SL_KEY_F0 + X)
-
-/* I do not intend to use keysymps > 0x1000. Applications can use those. */
-/* Returns 0 upon success or -1 upon error. */
-extern int SLkp_define_keysym (char *, unsigned int);
-
-/* This function must be called AFTER SLtt_get_terminfo and not before. */
-extern int SLkp_init (void);
-
-/* This function uses SLang_getkey and assumes that what ever initialization
- * is required for SLang_getkey has been performed.
- */
-extern int SLkp_getkey (void);
-
-/*}}}*/
-
-/*{{{ SLang Scroll Interface */
-
-typedef struct _SLscroll_Type
-{
- struct _SLscroll_Type *next;
- struct _SLscroll_Type *prev;
- unsigned int flags;
-}
-SLscroll_Type;
-
-typedef struct
-{
- unsigned int flags;
- SLscroll_Type *top_window_line; /* list element at top of window */
- SLscroll_Type *bot_window_line; /* list element at bottom of window */
- SLscroll_Type *current_line; /* current list element */
- SLscroll_Type *lines; /* first list element */
- unsigned int nrows; /* number of rows in window */
- unsigned int hidden_mask; /* applied to flags in SLscroll_Type */
- unsigned int line_num; /* current line number (visible) */
- unsigned int num_lines; /* total number of lines (visible) */
- unsigned int window_row; /* row of current_line in window */
- unsigned int border; /* number of rows that form scroll border */
- int cannot_scroll; /* should window scroll or recenter */
-}
-SLscroll_Window_Type;
-
-extern int SLscroll_find_top (SLscroll_Window_Type *);
-extern int SLscroll_find_line_num (SLscroll_Window_Type *);
-extern unsigned int SLscroll_next_n (SLscroll_Window_Type *, unsigned int);
-extern unsigned int SLscroll_prev_n (SLscroll_Window_Type *, unsigned int);
-extern int SLscroll_pageup (SLscroll_Window_Type *);
-extern int SLscroll_pagedown (SLscroll_Window_Type *);
-
-/*}}}*/
-
-/*{{{ Signal Routines */
-
-typedef void SLSig_Fun_Type (int);
-extern SLSig_Fun_Type *SLsignal (int, SLSig_Fun_Type *);
-extern SLSig_Fun_Type *SLsignal_intr (int, SLSig_Fun_Type *);
-extern int SLsig_block_signals (void);
-extern int SLsig_unblock_signals (void);
-extern int SLsystem (char *);
-
-extern char *SLerrno_strerror (int);
-extern int SLerrno_set_errno (int);
-
-/*}}}*/
-
-/*{{{ Interpreter Macro Definitions */
-
-/* The definitions here are for objects that may be on the run-time stack.
- * They are actually sub_types of literal and data main_types. The actual
- * numbers are historical.
- */
-#define SLANG_UNDEFINED_TYPE 0x00 /* MUST be 0 */
-#define SLANG_VOID_TYPE 0x01 /* also matches ANY type */
-#define SLANG_INT_TYPE 0x02
-#define SLANG_DOUBLE_TYPE 0x03
-#define SLANG_CHAR_TYPE 0x04
-#define SLANG_INTP_TYPE 0x05
-/* An object of SLANG_INTP_TYPE should never really occur on the stack. Rather,
- * the integer to which it refers will be there instead. It is defined here
- * because it is a valid type for MAKE_VARIABLE.
- */
-#define SLANG_REF_TYPE 0x06
-/* SLANG_REF_TYPE refers to an object on the stack that is a pointer (reference)
- * to some other object.
- */
-#define SLANG_COMPLEX_TYPE 0x07
-#define SLANG_NULL_TYPE 0x08
-#define SLANG_UCHAR_TYPE 0x09
-#define SLANG_SHORT_TYPE 0x0A
-#define SLANG_USHORT_TYPE 0x0B
-#define SLANG_UINT_TYPE 0x0C
-#define SLANG_LONG_TYPE 0x0D
-#define SLANG_ULONG_TYPE 0x0E
-#define SLANG_STRING_TYPE 0x0F
-#define SLANG_FLOAT_TYPE 0x10
-#define SLANG_STRUCT_TYPE 0x11
-#define SLANG_ISTRUCT_TYPE 0x12
-#define SLANG_ARRAY_TYPE 0x20
-#define SLANG_DATATYPE_TYPE 0x21
-#define SLANG_FILE_PTR_TYPE 0x22
-#define SLANG_ASSOC_TYPE 0x23
-#define SLANG_ANY_TYPE 0x24
-#define SLANG_BSTRING_TYPE 0x25
-#define SLANG_FILE_FD_TYPE 0x26
-
-/* Compatibility */
-#ifdef FLOAT_TYPE
-# undef FLOAT_TYPE
-#endif
-#define VOID_TYPE SLANG_VOID_TYPE
-#define INT_TYPE SLANG_INT_TYPE
-#define INTP_TYPE SLANG_INTP_TYPE
-#define FLOAT_TYPE SLANG_DOUBLE_TYPE
-#define ARRAY_TYPE SLANG_ARRAY_TYPE
-#define CHAR_TYPE SLANG_CHAR_TYPE
-#define STRING_TYPE SLANG_STRING_TYPE
-
-/* I am reserving values greater than or equal to 128 for user applications.
- * The first 127 are reserved for S-Lang.
- */
-
-/* Binary and Unary Subtypes */
-/* Since the application can define new types and can overload the binary
- * and unary operators, these definitions must be present in this file.
- * The current implementation assumes both unary and binary are distinct.
- */
-#define SLANG_PLUS 0x01
-#define SLANG_MINUS 0x02
-#define SLANG_TIMES 0x03
-#define SLANG_DIVIDE 0x04
-#define SLANG_EQ 0x05
-#define SLANG_NE 0x06
-#define SLANG_GT 0x07
-#define SLANG_GE 0x08
-#define SLANG_LT 0x09
-#define SLANG_LE 0x0A
-#define SLANG_POW 0x0B
-#define SLANG_OR 0x0C
-#define SLANG_AND 0x0D
-#define SLANG_BAND 0x0E
-#define SLANG_BOR 0x0F
-#define SLANG_BXOR 0x10
-#define SLANG_SHL 0x11
-#define SLANG_SHR 0x12
-#define SLANG_MOD 0x13
-
-/* UNARY subtypes (may be overloaded) */
-#define SLANG_PLUSPLUS 0x20
-#define SLANG_MINUSMINUS 0x21
-#define SLANG_ABS 0x22
-#define SLANG_SIGN 0x23
-#define SLANG_SQR 0x24
-#define SLANG_MUL2 0x25
-#define SLANG_CHS 0x26
-#define SLANG_NOT 0x27
-#define SLANG_BNOT 0x28
-
-extern char *SLang_Error_Message;
-
-int SLadd_intrinsic_variable (char *, VOID_STAR, unsigned char, int);
-int SLadd_intrinsic_function (char *, FVOID_STAR, unsigned char, unsigned int,...);
-
-int SLns_add_intrinsic_variable (SLang_NameSpace_Type *, char *, VOID_STAR, unsigned char, int);
-int SLns_add_intrinsic_function (SLang_NameSpace_Type *, char *, FVOID_STAR, unsigned char, unsigned int,...);
-
-extern void SLadd_at_handler (long *, char *);
-
-#define MAKE_INTRINSIC_N(n,f,out,in,a1,a2,a3,a4,a5,a6,a7) \
- {(n), NULL, SLANG_INTRINSIC, (FVOID_STAR) (f), \
- {a1,a2,a3,a4,a5,a6,a7}, (in), (out)}
-
-#define MAKE_INTRINSIC_7(n,f,out,a1,a2,a3,a4,a5,a6,a7) \
- MAKE_INTRINSIC_N(n,f,out,7,a1,a2,a3,a4,a5,a6,a7)
-#define MAKE_INTRINSIC_6(n,f,out,a1,a2,a3,a4,a5,a6) \
- MAKE_INTRINSIC_N(n,f,out,6,a1,a2,a3,a4,a5,a6,0)
-#define MAKE_INTRINSIC_5(n,f,out,a1,a2,a3,a4,a5) \
- MAKE_INTRINSIC_N(n,f,out,5,a1,a2,a3,a4,a5,0,0)
-#define MAKE_INTRINSIC_4(n,f,out,a1,a2,a3,a4) \
- MAKE_INTRINSIC_N(n,f,out,4,a1,a2,a3,a4,0,0,0)
-#define MAKE_INTRINSIC_3(n,f,out,a1,a2,a3) \
- MAKE_INTRINSIC_N(n,f,out,3,a1,a2,a3,0,0,0,0)
-#define MAKE_INTRINSIC_2(n,f,out,a1,a2) \
- MAKE_INTRINSIC_N(n,f,out,2,a1,a2,0,0,0,0,0)
-#define MAKE_INTRINSIC_1(n,f,out,a1) \
- MAKE_INTRINSIC_N(n,f,out,1,a1,0,0,0,0,0,0)
-#define MAKE_INTRINSIC_0(n,f,out) \
- MAKE_INTRINSIC_N(n,f,out,0,0,0,0,0,0,0,0)
-
-#define MAKE_INTRINSIC_S(n,f,r) \
- MAKE_INTRINSIC_1(n,f,r,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_I(n,f,r) \
- MAKE_INTRINSIC_1(n,f,r,SLANG_INT_TYPE)
-
-#define MAKE_INTRINSIC_SS(n,f,r) \
- MAKE_INTRINSIC_2(n,f,r,SLANG_STRING_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_SI(n,f,r) \
- MAKE_INTRINSIC_2(n,f,r,SLANG_STRING_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_IS(n,f,r) \
- MAKE_INTRINSIC_2(n,f,r,SLANG_INT_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_II(n,f,r) \
- MAKE_INTRINSIC_2(n,f,r,SLANG_INT_TYPE,SLANG_INT_TYPE)
-
-#define MAKE_INTRINSIC_SSS(n,f,r) \
- MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_STRING_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_SSI(n,f,r) \
- MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_STRING_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_SIS(n,f,r) \
- MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_INT_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_SII(n,f,r) \
- MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_INT_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_ISS(n,f,r) \
- MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_STRING_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_ISI(n,f,r) \
- MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_STRING_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_IIS(n,f,r) \
- MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_INT_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_III(n,f,r) \
- MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_INT_TYPE,SLANG_INT_TYPE)
-
-#define MAKE_INTRINSIC(n, f, out, in) \
- MAKE_INTRINSIC_N(n,f,out,in,0,0,0,0,0,0,0)
-
-#define MAKE_VARIABLE(n, v, t, r) \
- {n, NULL, SLANG_IVARIABLE + (r), (VOID_STAR)(v), (t)}
-
-#define MAKE_APP_UNARY(n,op) \
- {(n), NULL, SLANG_APP_UNARY, (op)}
-
-#define MAKE_MATH_UNARY(n,op) \
- {(n), NULL, SLANG_MATH_UNARY, (op)}
-
-#define MAKE_ICONSTANT(n,val) \
- {(n),NULL, SLANG_ICONSTANT, (val)}
-
-#define MAKE_DCONSTANT(n,val) \
- {(n),NULL, SLANG_DCONSTANT, (val)}
-
-#ifndef offsetof
-# define offsetof(T,F) ((unsigned int)((char *)&((T *)0L)->F - (char *)0L))
-#endif
-#define MAKE_ISTRUCT_FIELD(s,f,n,t,r) {(n), offsetof(s,f), (t), (r)}
-
-#define SLANG_END_TABLE {NULL}
-#define SLANG_END_INTRIN_FUN_TABLE MAKE_INTRINSIC_0(NULL,NULL,0)
-#define SLANG_END_DCONST_TABLE MAKE_DCONSTANT(NULL,0)
-#define SLANG_END_MATH_UNARY_TABLE MAKE_MATH_UNARY(NULL,0)
-#define SLANG_END_INTRIN_VAR_TABLE MAKE_VARIABLE(NULL,NULL,0,0)
-#define SLANG_END_ICONST_TABLE MAKE_ICONSTANT(NULL,0)
-#define SLANG_END_ISTRUCT_TABLE {NULL, 0, 0, 0}
-
-
-
-/*}}}*/
-
-/*{{{ Upper/Lowercase Functions */
-
-extern void SLang_define_case(int *, int *);
-extern void SLang_init_case_tables (void);
-
-extern unsigned char _SLChg_UCase_Lut[256];
-extern unsigned char _SLChg_LCase_Lut[256];
-#define UPPER_CASE(x) (_SLChg_UCase_Lut[(unsigned char) (x)])
-#define LOWER_CASE(x) (_SLChg_LCase_Lut[(unsigned char) (x)])
-#define CHANGE_CASE(x) (((x) == _SLChg_LCase_Lut[(unsigned char) (x)]) ?\
- _SLChg_UCase_Lut[(unsigned char) (x)] : _SLChg_LCase_Lut[(unsigned char) (x)])
-
-/*}}}*/
-
-/*{{{ Regular Expression Interface */
-
-typedef struct
-{
- /* These must be set by calling routine. */
- unsigned char *pat; /* regular expression pattern */
- unsigned char *buf; /* buffer for compiled regexp */
- unsigned int buf_len; /* length of buffer */
- int case_sensitive; /* 1 if match is case sensitive */
-
- /* The rest are set by SLang_regexp_compile */
-
- int must_match; /* 1 if line must contain substring */
- int must_match_bol; /* true if it must match beginning of line */
- unsigned char must_match_str[16]; /* 15 char null term substring */
- int osearch; /* 1 if ordinary search suffices */
- unsigned int min_length; /* minimum length the match must be */
- int beg_matches[10]; /* offset of start of \( */
- unsigned int end_matches[10]; /* length of nth submatch
- * Note that the entire match corresponds
- * to \0
- */
- int offset; /* offset to be added to beg_matches */
- int reserved[10];
-} SLRegexp_Type;
-
-extern unsigned char *SLang_regexp_match(unsigned char *,
- unsigned int,
- SLRegexp_Type *);
-
-/* Returns 0 upon success. If failure, the offset into the
- * pattern is returned (start = 1).
- */
-extern int SLang_regexp_compile (SLRegexp_Type *);
-extern char *SLregexp_quote_string (char *, char *, unsigned int);
-
-/*}}}*/
-
-/*{{{ SLang Command Interface */
-
-struct _SLcmd_Cmd_Type; /* Pre-declaration is needed below */
-typedef struct
-{
- struct _SLcmd_Cmd_Type *table;
- int argc;
- /* Version 2.0 needs to use a union!! */
- char **string_args;
- int *int_args;
- double *double_args;
- unsigned char *arg_type;
- unsigned long reserved[4];
-} SLcmd_Cmd_Table_Type;
-
-typedef struct _SLcmd_Cmd_Type
-{
- int (*cmdfun)(int, SLcmd_Cmd_Table_Type *);
- char *cmd;
- char *arg_type;
-} SLcmd_Cmd_Type;
-
-extern int SLcmd_execute_string (char *, SLcmd_Cmd_Table_Type *);
-
-/*}}}*/
-
-/*{{{ SLang Search Interface */
-
-typedef struct
-{
- int cs; /* case sensitive */
- unsigned char key[256];
- int ind[256];
- int key_len;
- int dir;
-} SLsearch_Type;
-
-extern int SLsearch_init (char *, int, int, SLsearch_Type *);
-/* This routine must first be called before any search can take place.
- * The second parameter specifies the direction of the search: greater than
- * zero for a forwrd search and less than zero for a backward search. The
- * third parameter specifies whether the search is case sensitive or not.
- * The last parameter is a pointer to a structure that is filled by this
- * function and it is this structure that must be passed to SLsearch.
- */
-
-extern unsigned char *SLsearch (unsigned char *, unsigned char *, SLsearch_Type *);
-/* To use this routine, you must first call 'SLsearch_init'. Then the first
- * two parameters p1 and p2 serve to define the region over which the search
- * is to take place. The third parameter is the structure that was previously
- * initialized by SLsearch_init.
- *
- * The routine returns a pointer to the match if found otherwise it returns
- * NULL.
- */
-
-/*}}}*/
-
-/*{{{ SLang Pathname Interface */
-
-/* These function return pointers to the original space */
-extern char *SLpath_basename (char *);
-extern char *SLpath_extname (char *);
-extern int SLpath_is_absolute_path (char *);
-
-/* These return malloced strings--- NOT slstrings */
-extern char *SLpath_dircat (char *, char *);
-extern char *SLpath_find_file_in_path (char *, char *);
-extern char *SLpath_dirname (char *);
-extern int SLpath_file_exists (char *);
-extern char *SLpath_pathname_sans_extname (char *);
-
-/*}}}*/
-
-extern int SLang_set_module_load_path (char *);
-
-#define SLANG_MODULE(name) \
- extern int init_##name##_module_ns (char *); \
- extern void deinit_##name##_module (void)
-
-#if 0
-{
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _DAVIS_SLANG_H_ */
diff --git a/mdk-stage1/slang/slarith.c b/mdk-stage1/slang/slarith.c
deleted file mode 100644
index 07ad68687..000000000
--- a/mdk-stage1/slang/slarith.c
+++ /dev/null
@@ -1,1656 +0,0 @@
-
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <math.h>
-
-#ifdef HAVE_LOCALE_H
-# include <locale.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-/*
- * This file defines binary and unary operations on all integer types.
- * Supported types include:
- *
- * SLANG_CHAR_TYPE (char)
- * SLANG_SHORT_TYPE (short)
- * SLANG_INT_TYPE (int)
- * SLANG_LONG_TYPE (long)
- * SLANG_FLOAT_TYPE (float)
- * SLANG_DOUBLE_TYPE (double)
- *
- * as well as unsigned types. The result-type of an arithmentic operation
- * will depend upon the data types involved. I am going to distinguish
- * between the boolean operations such as `and' and `or' from the arithmetic
- * operations such as `plus'. Since the result of a boolean operation is
- * either 1 or 0, a boolean result will be represented by SLANG_CHAR_TYPE.
- * Ordinarily I would use an integer but for arrays it makes more sense to
- * use a character data type.
- *
- * So, the following will be assumed (`+' is any arithmetic operator)
- *
- * char + char = int
- * char|short + short = int
- * char|short|int + int = int
- * char|short|int|long + long = long
- * char|short|int|long|float + float = float
- * char|short|int|long|float|double + double = double
- *
- * In the actual implementation, a brute force approach is avoided. Such
- * an approach would mean defining different functions for all possible
- * combinations of types. Including the unsigned types, and not including
- * the complex number type, there are 10 arithmetic types and 10*10=100
- * different combinations of types. Clearly this would be too much.
- *
- * One approach would be to define binary functions only between operands of
- * the same type and then convert types as appropriate. This would require
- * just 6 such functions (int, uint, long, ulong, float, double).
- * However, many conversion functions are going to be required, particularly
- * since we are going to allow typecasting from one arithmetic to another.
- * Since the bit pattern of signed and unsigned types are the same, and only
- * the interpretation differs, there will be no functions to convert between
- * signed and unsigned forms of a given type.
- */
-
-#define MAX_ARITHMETIC_TYPES 10
-
-unsigned char _SLarith_Is_Arith_Type [256];
-
-unsigned char _SLarith_Arith_Types[] =
-{
- SLANG_CHAR_TYPE,
- SLANG_UCHAR_TYPE,
- SLANG_SHORT_TYPE,
- SLANG_USHORT_TYPE,
- SLANG_INT_TYPE,
- SLANG_UINT_TYPE,
- SLANG_LONG_TYPE,
- SLANG_ULONG_TYPE,
- SLANG_FLOAT_TYPE,
- SLANG_DOUBLE_TYPE,
- 0
-};
-
-/* Here are a bunch of functions to convert from one type to another. To
- * facilitate the process, a macros will be used.
- */
-
-#define DEFUN_1(f,from_type,to_type) \
-static void f (to_type *y, from_type *x, unsigned int n) \
-{ \
- unsigned int i; \
- for (i = 0; i < n; i++) y[i] = (to_type) x[i]; \
-}
-
-#define DEFUN_2(f,from_type,to_type,copy_fun) \
-static VOID_STAR f (VOID_STAR xp, unsigned int n) \
-{ \
- from_type *x; \
- to_type *y; \
- x = (from_type *) xp; \
- if (NULL == (y = (to_type *) SLmalloc (sizeof (to_type) * n))) return NULL; \
- copy_fun (y, x, n); \
- return (VOID_STAR) y; \
-}
-typedef VOID_STAR (*Convert_Fun_Type)(VOID_STAR, unsigned int);
-
-DEFUN_1(copy_char_to_char,char,char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_char_to_short,char,short)
-DEFUN_1(copy_char_to_ushort,char,unsigned short)
-#else
-# define copy_char_to_short copy_char_to_int
-# define copy_char_to_ushort copy_char_to_uint
-#endif
-DEFUN_1(copy_char_to_int,char,int)
-DEFUN_1(copy_char_to_uint,char,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_char_to_long,char,long)
-DEFUN_1(copy_char_to_ulong,char,unsigned long)
-#else
-# define copy_char_to_long copy_char_to_int
-# define copy_char_to_ulong copy_char_to_uint
-#endif
-DEFUN_1(copy_char_to_float,char,float)
-DEFUN_1(copy_char_to_double,char,double)
-
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_uchar_to_short,unsigned char,short)
-DEFUN_1(copy_uchar_to_ushort,unsigned char,unsigned short)
-#else
-# define copy_uchar_to_short copy_uchar_to_int
-# define copy_uchar_to_ushort copy_uchar_to_uint
-#endif
-DEFUN_1(copy_uchar_to_int,unsigned char,int)
-DEFUN_1(copy_uchar_to_uint,unsigned char,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_uchar_to_long,unsigned char,long)
-DEFUN_1(copy_uchar_to_ulong,unsigned char,unsigned long)
-#else
-# define copy_uchar_to_long copy_uchar_to_int
-# define copy_uchar_to_ulong copy_uchar_to_uint
-#endif
-DEFUN_1(copy_uchar_to_float,unsigned char,float)
-DEFUN_1(copy_uchar_to_double,unsigned char,double)
-
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_short_to_char,short,char)
-DEFUN_1(copy_short_to_uchar,short,unsigned char)
-DEFUN_1(copy_short_to_short,short,short)
-DEFUN_1(copy_short_to_int,short,int)
-DEFUN_1(copy_short_to_uint,short,unsigned int)
-DEFUN_1(copy_short_to_long,short,long)
-DEFUN_1(copy_short_to_ulong,short,unsigned long)
-DEFUN_1(copy_short_to_float,short,float)
-DEFUN_1(copy_short_to_double,short,double)
-DEFUN_1(copy_ushort_to_char,unsigned short,char)
-DEFUN_1(copy_ushort_to_uchar,unsigned short,unsigned char)
-DEFUN_1(copy_ushort_to_int,unsigned short,int)
-DEFUN_1(copy_ushort_to_uint,unsigned short,unsigned int)
-DEFUN_1(copy_ushort_to_long,unsigned short,long)
-DEFUN_1(copy_ushort_to_ulong,unsigned short,unsigned long)
-DEFUN_1(copy_ushort_to_float,unsigned short,float)
-DEFUN_1(copy_ushort_to_double,unsigned short,double)
-#else
-# define copy_short_to_char copy_int_to_char
-# define copy_short_to_uchar copy_int_to_uchar
-# define copy_short_to_short copy_int_to_int
-# define copy_short_to_int copy_int_to_int
-# define copy_short_to_uint copy_int_to_int
-# define copy_short_to_long copy_int_to_long
-# define copy_short_to_ulong copy_int_to_ulong
-# define copy_short_to_float copy_int_to_float
-# define copy_short_to_double copy_int_to_double
-# define copy_ushort_to_char copy_uint_to_char
-# define copy_ushort_to_uchar copy_uint_to_uchar
-# define copy_ushort_to_int copy_int_to_int
-# define copy_ushort_to_uint copy_int_to_int
-# define copy_ushort_to_long copy_uint_to_long
-# define copy_ushort_to_ulong copy_uint_to_ulong
-# define copy_ushort_to_float copy_uint_to_float
-# define copy_ushort_to_double copy_uint_to_double
-#endif
-
-DEFUN_1(copy_int_to_char,int,char)
-DEFUN_1(copy_int_to_uchar,int,unsigned char)
-DEFUN_1(copy_uint_to_char,unsigned int,char)
-DEFUN_1(copy_uint_to_uchar,unsigned int,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_int_to_short,int,short)
-DEFUN_1(copy_int_to_ushort,int,unsigned short)
-DEFUN_1(copy_uint_to_short,unsigned int,short)
-DEFUN_1(copy_uint_to_ushort,unsigned int,unsigned short)
-#else
-# define copy_int_to_short copy_int_to_int
-# define copy_int_to_ushort copy_int_to_int
-# define copy_uint_to_short copy_int_to_int
-# define copy_uint_to_ushort copy_int_to_int
-#endif
-DEFUN_1(copy_int_to_int,int,int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_int_to_long,int,long)
-DEFUN_1(copy_int_to_ulong,int,unsigned long)
-DEFUN_1(copy_uint_to_long,unsigned int,long)
-DEFUN_1(copy_uint_to_ulong,unsigned int,unsigned long)
-#else
-# define copy_int_to_long copy_int_to_int
-# define copy_int_to_ulong copy_int_to_int
-# define copy_uint_to_long copy_int_to_int
-# define copy_uint_to_ulong copy_int_to_int
-#endif
-DEFUN_1(copy_int_to_float,int,float)
-DEFUN_1(copy_int_to_double,int,double)
-DEFUN_1(copy_uint_to_float,unsigned int,float)
-DEFUN_1(copy_uint_to_double,unsigned int,double)
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_long_to_char,long,char)
-DEFUN_1(copy_long_to_uchar,long,unsigned char)
-DEFUN_1(copy_long_to_short,long,short)
-DEFUN_1(copy_long_to_ushort,long,unsigned short)
-DEFUN_1(copy_long_to_int,long,int)
-DEFUN_1(copy_long_to_uint,long,unsigned int)
-DEFUN_1(copy_long_to_long,long,long)
-DEFUN_1(copy_long_to_float,long,float)
-DEFUN_1(copy_long_to_double,long,double)
-DEFUN_1(copy_ulong_to_char,unsigned long,char)
-DEFUN_1(copy_ulong_to_uchar,unsigned long,unsigned char)
-DEFUN_1(copy_ulong_to_short,unsigned long,short)
-DEFUN_1(copy_ulong_to_ushort,unsigned long,unsigned short)
-DEFUN_1(copy_ulong_to_int,unsigned long,int)
-DEFUN_1(copy_ulong_to_uint,unsigned long,unsigned int)
-DEFUN_1(copy_ulong_to_float,unsigned long,float)
-DEFUN_1(copy_ulong_to_double,unsigned long,double)
-#else
-#define copy_long_to_char copy_int_to_char
-#define copy_long_to_uchar copy_int_to_uchar
-#define copy_long_to_short copy_int_to_short
-#define copy_long_to_ushort copy_int_to_ushort
-#define copy_long_to_int copy_int_to_int
-#define copy_long_to_uint copy_int_to_int
-#define copy_long_to_long copy_int_to_int
-#define copy_long_to_float copy_int_to_float
-#define copy_long_to_double copy_int_to_double
-#define copy_ulong_to_char copy_uint_to_char
-#define copy_ulong_to_uchar copy_uint_to_uchar
-#define copy_ulong_to_short copy_uint_to_short
-#define copy_ulong_to_ushort copy_uint_to_ushort
-#define copy_ulong_to_int copy_int_to_int
-#define copy_ulong_to_uint copy_int_to_int
-#define copy_ulong_to_float copy_uint_to_float
-#define copy_ulong_to_double copy_uint_to_double
-#endif
-
-DEFUN_1(copy_float_to_char,float,char)
-DEFUN_1(copy_float_to_uchar,float,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_float_to_short,float,short)
-DEFUN_1(copy_float_to_ushort,float,unsigned short)
-#else
-# define copy_float_to_short copy_float_to_int
-# define copy_float_to_ushort copy_float_to_uint
-#endif
-DEFUN_1(copy_float_to_int,float,int)
-DEFUN_1(copy_float_to_uint,float,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_float_to_long,float,long)
-DEFUN_1(copy_float_to_ulong,float,unsigned long)
-#else
-# define copy_float_to_long copy_float_to_int
-# define copy_float_to_ulong copy_float_to_uint
-#endif
-DEFUN_1(copy_float_to_float,float,float)
-DEFUN_1(copy_float_to_double,float,double)
-
-DEFUN_1(copy_double_to_char,double,char)
-DEFUN_1(copy_double_to_uchar,double,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_double_to_short,double,short)
-DEFUN_1(copy_double_to_ushort,double,unsigned short)
-#else
-# define copy_double_to_short copy_double_to_int
-# define copy_double_to_ushort copy_double_to_uint
-#endif
-DEFUN_1(copy_double_to_int,double,int)
-DEFUN_1(copy_double_to_uint,double,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_double_to_long,double,long)
-DEFUN_1(copy_double_to_ulong,double,unsigned long)
-#else
-# define copy_double_to_long copy_double_to_int
-# define copy_double_to_ulong copy_double_to_uint
-#endif
-DEFUN_1(copy_double_to_float,double,float)
-DEFUN_1(copy_double_to_double,double,double)
-
-DEFUN_2(char_to_int,char,int,copy_char_to_int)
-DEFUN_2(char_to_uint,char,unsigned int,copy_char_to_uint)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(char_to_long,char,long,copy_char_to_long)
-DEFUN_2(char_to_ulong,char,unsigned long,copy_char_to_ulong)
-#else
-# define char_to_long char_to_int
-# define char_to_ulong char_to_uint
-#endif
-DEFUN_2(char_to_float,char,float,copy_char_to_float)
-DEFUN_2(char_to_double,char,double,copy_char_to_double)
-
-DEFUN_2(uchar_to_int,unsigned char,int,copy_uchar_to_int)
-DEFUN_2(uchar_to_uint,unsigned char,unsigned int,copy_uchar_to_uint)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(uchar_to_long,unsigned char,long,copy_uchar_to_long)
-DEFUN_2(uchar_to_ulong,unsigned char,unsigned long,copy_uchar_to_ulong)
-#else
-# define uchar_to_long uchar_to_int
-# define uchar_to_ulong uchar_to_uint
-#endif
-DEFUN_2(uchar_to_float,unsigned char,float,copy_uchar_to_float)
-DEFUN_2(uchar_to_double,unsigned char,double,copy_uchar_to_double)
-
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_2(short_to_int,short,int,copy_short_to_int)
-DEFUN_2(short_to_uint,short,unsigned int,copy_short_to_uint)
-DEFUN_2(short_to_long,short,long,copy_short_to_long)
-DEFUN_2(short_to_ulong,short,unsigned long,copy_short_to_ulong)
-DEFUN_2(short_to_float,short,float,copy_short_to_float)
-DEFUN_2(short_to_double,short,double,copy_short_to_double)
-DEFUN_2(ushort_to_int,unsigned short,int,copy_ushort_to_int)
-DEFUN_2(ushort_to_uint,unsigned short,unsigned int,copy_ushort_to_uint)
-DEFUN_2(ushort_to_long,unsigned short,long,copy_ushort_to_long)
-DEFUN_2(ushort_to_ulong,unsigned short,unsigned long,copy_ushort_to_ulong)
-DEFUN_2(ushort_to_float,unsigned short,float,copy_ushort_to_float)
-DEFUN_2(ushort_to_double,unsigned short,double,copy_ushort_to_double)
-#else
-# define short_to_int NULL
-# define short_to_uint NULL
-# define short_to_long int_to_long
-# define short_to_ulong int_to_ulong
-# define short_to_float int_to_float
-# define short_to_double int_to_double
-# define ushort_to_int NULL
-# define ushort_to_uint NULL
-# define ushort_to_long uint_to_long
-# define ushort_to_ulong uint_to_ulong
-# define ushort_to_float uint_to_float
-# define ushort_to_double uint_to_double
-#endif
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(int_to_long,int,long,copy_int_to_long)
-DEFUN_2(int_to_ulong,int,unsigned long,copy_int_to_ulong)
-#else
-# define int_to_long NULL
-# define int_to_ulong NULL
-#endif
-DEFUN_2(int_to_float,int,float,copy_int_to_float)
-DEFUN_2(int_to_double,int,double,copy_int_to_double)
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(uint_to_long,unsigned int,long,copy_uint_to_long)
-DEFUN_2(uint_to_ulong,unsigned int,unsigned long,copy_uint_to_ulong)
-#else
-# define uint_to_long NULL
-# define uint_to_ulong NULL
-#endif
-DEFUN_2(uint_to_float,unsigned int,float,copy_uint_to_float)
-DEFUN_2(uint_to_double,unsigned int,double,copy_uint_to_double)
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(long_to_float,long,float,copy_long_to_float)
-DEFUN_2(long_to_double,long,double,copy_long_to_double)
-DEFUN_2(ulong_to_float,unsigned long,float,copy_ulong_to_float)
-DEFUN_2(ulong_to_double,unsigned long,double,copy_ulong_to_double)
-#else
-# define long_to_float int_to_float
-# define long_to_double int_to_double
-# define ulong_to_float uint_to_float
-# define ulong_to_double uint_to_double
-#endif
-
-DEFUN_2(float_to_double,float,double,copy_float_to_double)
-
-#define TO_DOUBLE_FUN(name,type) \
-static double name (VOID_STAR x) { return (double) *(type *) x; }
-TO_DOUBLE_FUN(char_to_one_double,char)
-TO_DOUBLE_FUN(uchar_to_one_double,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-TO_DOUBLE_FUN(short_to_one_double,short)
-TO_DOUBLE_FUN(ushort_to_one_double,unsigned short)
-#else
-# define short_to_one_double int_to_one_double
-# define ushort_to_one_double uint_to_one_double
-#endif
-TO_DOUBLE_FUN(int_to_one_double,int)
-TO_DOUBLE_FUN(uint_to_one_double,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-TO_DOUBLE_FUN(long_to_one_double,long)
-TO_DOUBLE_FUN(ulong_to_one_double,unsigned long)
-#else
-# define long_to_one_double int_to_one_double
-# define ulong_to_one_double uint_to_one_double
-#endif
-TO_DOUBLE_FUN(float_to_one_double,float)
-TO_DOUBLE_FUN(double_to_one_double,double)
-
-SLang_To_Double_Fun_Type
-SLarith_get_to_double_fun (unsigned char type, unsigned int *sizeof_type)
-{
- unsigned int da;
- SLang_To_Double_Fun_Type to_double;
-
- switch (type)
- {
- default:
- return NULL;
-
- case SLANG_CHAR_TYPE:
- da = sizeof (char); to_double = char_to_one_double;
- break;
- case SLANG_UCHAR_TYPE:
- da = sizeof (unsigned char); to_double = uchar_to_one_double;
- break;
- case SLANG_SHORT_TYPE:
- da = sizeof (short); to_double = short_to_one_double;
- break;
- case SLANG_USHORT_TYPE:
- da = sizeof (unsigned short); to_double = ushort_to_one_double;
- break;
- case SLANG_INT_TYPE:
- da = sizeof (int); to_double = int_to_one_double;
- break;
- case SLANG_UINT_TYPE:
- da = sizeof (unsigned int); to_double = uint_to_one_double;
- break;
- case SLANG_LONG_TYPE:
- da = sizeof (long); to_double = long_to_one_double;
- break;
- case SLANG_ULONG_TYPE:
- da = sizeof (unsigned long); to_double = ulong_to_one_double;
- break;
- case SLANG_FLOAT_TYPE:
- da = sizeof (float); to_double = float_to_one_double;
- break;
- case SLANG_DOUBLE_TYPE:
- da = sizeof (double); to_double = double_to_one_double;
- break;
- }
-
- if (sizeof_type != NULL) *sizeof_type = da;
- return to_double;
-}
-
-/* Each element of the matrix determines how the row maps onto the column.
- * That is, let the matrix be B_ij. Where the i,j indices refer to
- * precedence of the type. Then,
- * B_ij->copy_function copies type i to type j. Similarly,
- * B_ij->convert_function mallocs a new array of type j and copies i to it.
- *
- * Since types are always converted to higher levels of precedence for binary
- * operations, many of the elements are NULL.
- *
- * Is the idea clear?
- */
-typedef struct
-{
- FVOID_STAR copy_function;
- Convert_Fun_Type convert_function;
-}
-Binary_Matrix_Type;
-
-static Binary_Matrix_Type Binary_Matrix [MAX_ARITHMETIC_TYPES][MAX_ARITHMETIC_TYPES] =
-{
- {
- {(FVOID_STAR)copy_char_to_char, NULL},
- {(FVOID_STAR)copy_char_to_char, NULL},
- {(FVOID_STAR) copy_char_to_short, NULL},
- {(FVOID_STAR) copy_char_to_ushort, NULL},
- {(FVOID_STAR) copy_char_to_int, char_to_int},
- {(FVOID_STAR) copy_char_to_uint, char_to_uint},
- {(FVOID_STAR) copy_char_to_long, char_to_long},
- {(FVOID_STAR) copy_char_to_ulong, char_to_ulong},
- {(FVOID_STAR) copy_char_to_float, char_to_float},
- {(FVOID_STAR) copy_char_to_double, char_to_double},
- },
-
- {
- {(FVOID_STAR)copy_char_to_char, NULL},
- {(FVOID_STAR)copy_char_to_char, NULL},
- {(FVOID_STAR) copy_uchar_to_short, NULL},
- {(FVOID_STAR) copy_uchar_to_ushort, NULL},
- {(FVOID_STAR) copy_uchar_to_int, uchar_to_int},
- {(FVOID_STAR) copy_uchar_to_uint, uchar_to_uint},
- {(FVOID_STAR) copy_uchar_to_long, uchar_to_long},
- {(FVOID_STAR) copy_uchar_to_ulong, uchar_to_ulong},
- {(FVOID_STAR) copy_uchar_to_float, uchar_to_float},
- {(FVOID_STAR) copy_uchar_to_double, uchar_to_double},
- },
-
- {
- {(FVOID_STAR) copy_short_to_char, NULL},
- {(FVOID_STAR) copy_short_to_uchar, NULL},
- {(FVOID_STAR) copy_short_to_short, NULL},
- {(FVOID_STAR) copy_short_to_short, NULL},
- {(FVOID_STAR) copy_short_to_int, short_to_int},
- {(FVOID_STAR) copy_short_to_uint, short_to_uint},
- {(FVOID_STAR) copy_short_to_long, short_to_long},
- {(FVOID_STAR) copy_short_to_ulong, short_to_ulong},
- {(FVOID_STAR) copy_short_to_float, short_to_float},
- {(FVOID_STAR) copy_short_to_double, short_to_double},
- },
-
- {
- {(FVOID_STAR) copy_ushort_to_char, NULL},
- {(FVOID_STAR) copy_ushort_to_uchar, NULL},
- {(FVOID_STAR) copy_short_to_short, NULL},
- {(FVOID_STAR) copy_short_to_short, NULL},
- {(FVOID_STAR) copy_ushort_to_int, ushort_to_int},
- {(FVOID_STAR) copy_ushort_to_uint, ushort_to_uint},
- {(FVOID_STAR) copy_ushort_to_long, ushort_to_long},
- {(FVOID_STAR) copy_ushort_to_ulong, ushort_to_ulong},
- {(FVOID_STAR) copy_ushort_to_float, ushort_to_float},
- {(FVOID_STAR) copy_ushort_to_double, ushort_to_double},
- },
-
- {
- {(FVOID_STAR) copy_int_to_char, NULL},
- {(FVOID_STAR) copy_int_to_uchar, NULL},
- {(FVOID_STAR) copy_int_to_short, NULL},
- {(FVOID_STAR) copy_int_to_ushort, NULL},
- {(FVOID_STAR) copy_int_to_int, NULL},
- {(FVOID_STAR) copy_int_to_int, NULL},
- {(FVOID_STAR) copy_int_to_long, int_to_long},
- {(FVOID_STAR) copy_int_to_ulong, int_to_ulong},
- {(FVOID_STAR) copy_int_to_float, int_to_float},
- {(FVOID_STAR) copy_int_to_double, int_to_double},
- },
-
- {
- {(FVOID_STAR) copy_uint_to_char, NULL},
- {(FVOID_STAR) copy_uint_to_uchar, NULL},
- {(FVOID_STAR) copy_uint_to_short, NULL},
- {(FVOID_STAR) copy_uint_to_ushort, NULL},
- {(FVOID_STAR) copy_int_to_int, NULL},
- {(FVOID_STAR) copy_int_to_int, NULL},
- {(FVOID_STAR) copy_uint_to_long, uint_to_long},
- {(FVOID_STAR) copy_uint_to_ulong, uint_to_ulong},
- {(FVOID_STAR) copy_uint_to_float, uint_to_float},
- {(FVOID_STAR) copy_uint_to_double, uint_to_double},
- },
-
- {
- {(FVOID_STAR) copy_long_to_char, NULL},
- {(FVOID_STAR) copy_long_to_uchar, NULL},
- {(FVOID_STAR) copy_long_to_short, NULL},
- {(FVOID_STAR) copy_long_to_ushort, NULL},
- {(FVOID_STAR) copy_long_to_int, NULL},
- {(FVOID_STAR) copy_long_to_uint, NULL},
- {(FVOID_STAR) copy_long_to_long, NULL},
- {(FVOID_STAR) copy_long_to_long, NULL},
- {(FVOID_STAR) copy_long_to_float, long_to_float},
- {(FVOID_STAR) copy_long_to_double, long_to_double},
- },
-
- {
- {(FVOID_STAR) copy_ulong_to_char, NULL},
- {(FVOID_STAR) copy_ulong_to_uchar, NULL},
- {(FVOID_STAR) copy_ulong_to_short, NULL},
- {(FVOID_STAR) copy_ulong_to_ushort, NULL},
- {(FVOID_STAR) copy_ulong_to_int, NULL},
- {(FVOID_STAR) copy_ulong_to_uint, NULL},
- {(FVOID_STAR) copy_long_to_long, NULL},
- {(FVOID_STAR) copy_long_to_long, NULL},
- {(FVOID_STAR) copy_ulong_to_float, ulong_to_float},
- {(FVOID_STAR) copy_ulong_to_double, ulong_to_double},
- },
-
- {
- {(FVOID_STAR) copy_float_to_char, NULL},
- {(FVOID_STAR) copy_float_to_uchar, NULL},
- {(FVOID_STAR) copy_float_to_short, NULL},
- {(FVOID_STAR) copy_float_to_ushort, NULL},
- {(FVOID_STAR) copy_float_to_int, NULL},
- {(FVOID_STAR) copy_float_to_uint, NULL},
- {(FVOID_STAR) copy_float_to_long, NULL},
- {(FVOID_STAR) copy_float_to_ulong, NULL},
- {(FVOID_STAR) copy_float_to_float, NULL},
- {(FVOID_STAR) copy_float_to_double, float_to_double},
- },
-
- {
- {(FVOID_STAR) copy_double_to_char, NULL},
- {(FVOID_STAR) copy_double_to_uchar, NULL},
- {(FVOID_STAR) copy_double_to_short, NULL},
- {(FVOID_STAR) copy_double_to_ushort, NULL},
- {(FVOID_STAR) copy_double_to_int, NULL},
- {(FVOID_STAR) copy_double_to_uint, NULL},
- {(FVOID_STAR) copy_double_to_long, NULL},
- {(FVOID_STAR) copy_double_to_ulong, NULL},
- {(FVOID_STAR) copy_double_to_float, NULL},
- {(FVOID_STAR) copy_double_to_double, NULL},
- }
-};
-
-#define GENERIC_BINARY_FUNCTION int_int_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE int
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define ABS_FUNCTION abs
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION int_unary_op
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION int_int_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_int_obj(SLANG_INT_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION int_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_BINARY_FUNCTION uint_uint_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned int
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION uint_unary_op
-#define ABS_FUNCTION(a) (a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define SCALAR_BINARY_FUNCTION uint_uint_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_int_obj(SLANG_UINT_TYPE,(int)(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION uint_cmp_function
-#include "slarith.inc"
-
-#if SIZEOF_LONG != SIZEOF_INT
-#define GENERIC_BINARY_FUNCTION long_long_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE long
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION long_unary_op
-#define ABS_FUNCTION(a) (((a) >= 0) ? (a) : -(a))
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION long_long_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_long_obj(SLANG_LONG_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION long_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_BINARY_FUNCTION ulong_ulong_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned long
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION ulong_unary_op
-#define ABS_FUNCTION(a) (a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define SCALAR_BINARY_FUNCTION ulong_ulong_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_long_obj(SLANG_ULONG_TYPE,(long)(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION ulong_cmp_function
-#include "slarith.inc"
-#else
-#define long_long_bin_op int_int_bin_op
-#define ulong_ulong_bin_op uint_uint_bin_op
-#define long_unary_op int_unary_op
-#define ulong_unary_op uint_unary_op
-#define long_cmp_function int_cmp_function
-#define ulong_cmp_function uint_cmp_function
-#endif /* SIZEOF_INT != SIZEOF_LONG */
-
-#define GENERIC_BINARY_FUNCTION float_float_bin_op
-#define GENERIC_TYPE float
-#define POW_FUNCTION(a,b) (float)pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE float
-#define MOD_FUNCTION(a,b) (float)fmod((a),(b))
-#define GENERIC_UNARY_FUNCTION float_unary_op
-#define ABS_FUNCTION(a) (float)fabs((double) a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION float_float_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_float_obj(SLANG_FLOAT_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_float_obj(SLANG_FLOAT_TYPE, (x))
-#define CMP_FUNCTION float_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_BINARY_FUNCTION double_double_bin_op
-#define GENERIC_TYPE double
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) (float)fmod((a),(b))
-#define GENERIC_UNARY_FUNCTION double_unary_op
-#define ABS_FUNCTION(a) fabs(a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION double_double_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION double_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_UNARY_FUNCTION char_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE signed char
-#define ABS_FUNCTION abs
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define CMP_FUNCTION char_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_UNARY_FUNCTION uchar_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned char
-#define ABS_FUNCTION(x) (x)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define CMP_FUNCTION uchar_cmp_function
-#include "slarith.inc"
-
-#if SIZEOF_SHORT != SIZEOF_INT
-#define GENERIC_UNARY_FUNCTION short_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE short
-#define ABS_FUNCTION abs
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define CMP_FUNCTION short_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_UNARY_FUNCTION ushort_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned short
-#define ABS_FUNCTION(x) (x)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define CMP_FUNCTION ushort_cmp_function
-#include "slarith.inc"
-#endif /* SIZEOF_INT != SIZEOF_SHORT */
-
-/* Unfortunately, the numbers that were assigned to the data-types were
- * not well thought out. So, I need to use the following table.
- */
-#define MAXIMUM_ARITH_TYPE_VALUE SLANG_FLOAT_TYPE
-#define IS_INTEGER_TYPE(x) \
- (((x) <= MAXIMUM_ARITH_TYPE_VALUE) \
- && (Type_Precedence_Table[x] < 8) && (Type_Precedence_Table[x] != -1))
-#define IS_ARITHMETIC_TYPE(x) \
- (((x) <= MAXIMUM_ARITH_TYPE_VALUE) && (Type_Precedence_Table[x] != -1))
-
-#define LONG_PRECEDENCE_VALUE 6
-#define FLOAT_PRECEDENCE_VALUE 8
-
-static signed char Type_Precedence_Table [MAXIMUM_ARITH_TYPE_VALUE + 1] =
-{
- -1, /* SLANG_UNDEFINED_TYPE */
- -1, /* SLANG_VOID_TYPE */
- 4, /* SLANG_INT_TYPE */
- 9, /* SLANG_DOUBLE_TYPE */
- 0, /* SLANG_CHAR_TYPE */
- -1, /* SLANG_INTP_TYPE */
- -1, /* SLANG_REF_TYPE */
- -1, /* SLANG_COMPLEX_TYPE */
- -1, /* SLANG_NULL_TYPE */
- 1, /* SLANG_UCHAR_TYPE */
- 2, /* SLANG_SHORT_TYPE */
- 3, /* SLANG_USHORT_TYPE */
- 5, /* SLANG_UINT_TYPE */
- 6, /* SLANG_LONG_TYPE */
- 7, /* SLANG_ULONG_TYPE */
- -1, /* SLANG_STRING_TYPE */
- 8 /* SLANG_FLOAT_TYPE */
-};
-
-int _SLarith_get_precedence (unsigned char type)
-{
- if (type > MAXIMUM_ARITH_TYPE_VALUE)
- return -1;
-
- return Type_Precedence_Table[type];
-}
-
-unsigned char _SLarith_promote_type (unsigned char t)
-{
- switch (t)
- {
- case SLANG_FLOAT_TYPE:
- case SLANG_DOUBLE_TYPE:
- case SLANG_LONG_TYPE:
- case SLANG_ULONG_TYPE:
- case SLANG_INT_TYPE:
- case SLANG_UINT_TYPE:
- break;
-
- case SLANG_USHORT_TYPE:
-#if SIZEOF_INT == SIZEOF_SHORT
- t = SLANG_UINT_TYPE;
- break;
-#endif
- /* drop */
- case SLANG_CHAR_TYPE:
- case SLANG_UCHAR_TYPE:
- case SLANG_SHORT_TYPE:
- default:
- t = SLANG_INT_TYPE;
- }
-
- return t;
-}
-
-static unsigned char promote_to_common_type (unsigned char a, unsigned char b)
-{
- a = _SLarith_promote_type (a);
- b = _SLarith_promote_type (b);
-
- return (Type_Precedence_Table[a] > Type_Precedence_Table[b]) ? a : b;
-}
-
-static int arith_bin_op_result (int op, unsigned char a_type, unsigned char b_type,
- unsigned char *c_type)
-{
- switch (op)
- {
- case SLANG_EQ:
- case SLANG_NE:
- case SLANG_GT:
- case SLANG_GE:
- case SLANG_LT:
- case SLANG_LE:
- case SLANG_OR:
- case SLANG_AND:
- *c_type = SLANG_CHAR_TYPE;
- return 1;
-
- case SLANG_POW:
- if (SLANG_FLOAT_TYPE == promote_to_common_type (a_type, b_type))
- *c_type = SLANG_FLOAT_TYPE;
- else
- *c_type = SLANG_DOUBLE_TYPE;
- return 1;
-
- case SLANG_BAND:
- case SLANG_BXOR:
- case SLANG_BOR:
- case SLANG_SHL:
- case SLANG_SHR:
- /* The bit-level operations are defined just for integer types */
- if ((0 == IS_INTEGER_TYPE (a_type))
- || (0 == IS_INTEGER_TYPE(b_type)))
- return 0;
- break;
-
- default:
- break;
- }
-
- *c_type = promote_to_common_type (a_type, b_type);
- return 1;
-}
-
-typedef int (*Bin_Fun_Type) (int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR);
-
-/* This array of functions must be indexed by precedence after arithmetic
- * promotions.
- */
-static Bin_Fun_Type Bin_Fun_Map [MAX_ARITHMETIC_TYPES] =
-{
- NULL,
- NULL,
- NULL,
- NULL,
- int_int_bin_op,
- uint_uint_bin_op,
- long_long_bin_op,
- ulong_ulong_bin_op,
- float_float_bin_op,
- double_double_bin_op
-};
-
-static int arith_bin_op (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- Convert_Fun_Type af, bf;
- Bin_Fun_Type binfun;
- int a_indx, b_indx, c_indx;
- unsigned char c_type;
- int ret;
-
- c_type = promote_to_common_type (a_type, b_type);
-
- a_indx = Type_Precedence_Table [a_type];
- b_indx = Type_Precedence_Table [b_type];
- c_indx = Type_Precedence_Table [c_type];
-
- af = Binary_Matrix[a_indx][c_indx].convert_function;
- bf = Binary_Matrix[b_indx][c_indx].convert_function;
- binfun = Bin_Fun_Map[c_indx];
-
- if ((af != NULL)
- && (NULL == (ap = (VOID_STAR) (*af) (ap, na))))
- return -1;
-
- if ((bf != NULL)
- && (NULL == (bp = (VOID_STAR) (*bf) (bp, nb))))
- {
- if (af != NULL) SLfree ((char *) ap);
- return -1;
- }
-
- ret = (*binfun) (op, a_type, ap, na, b_type, bp, nb, cp);
- if (af != NULL) SLfree ((char *) ap);
- if (bf != NULL) SLfree ((char *) bp);
-
- return ret;
-}
-
-static int arith_unary_op_result (int op, unsigned char a, unsigned char *b)
-{
- (void) a;
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_SQR:
- case SLANG_MUL2:
- case SLANG_PLUSPLUS:
- case SLANG_MINUSMINUS:
- case SLANG_CHS:
- case SLANG_ABS:
- *b = a;
- break;
-
- case SLANG_NOT:
- case SLANG_BNOT:
- if (0 == IS_INTEGER_TYPE(a))
- return 0;
- *b = a;
- break;
-
- case SLANG_SIGN:
- *b = SLANG_INT_TYPE;
- break;
- }
- return 1;
-}
-
-static int integer_pop (unsigned char type, VOID_STAR ptr)
-{
- SLang_Object_Type obj;
- int i, j;
- void (*f)(VOID_STAR, VOID_STAR, unsigned int);
-
- if (-1 == SLang_pop (&obj))
- return -1;
-
- if ((obj.data_type > MAXIMUM_ARITH_TYPE_VALUE)
- || ((j = Type_Precedence_Table[obj.data_type]) == -1)
- || (j >= FLOAT_PRECEDENCE_VALUE))
- {
- _SLclass_type_mismatch_error (type, obj.data_type);
- SLang_free_object (&obj);
- return -1;
- }
-
- i = Type_Precedence_Table[type];
- f = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
- Binary_Matrix[j][i].copy_function;
-
- (*f) (ptr, (VOID_STAR)&obj.v, 1);
-
- return 0;
-}
-
-static int integer_push (unsigned char type, VOID_STAR ptr)
-{
- SLang_Object_Type obj;
- int i;
- void (*f)(VOID_STAR, VOID_STAR, unsigned int);
-
- i = Type_Precedence_Table[type];
- f = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
- Binary_Matrix[i][i].copy_function;
-
- obj.data_type = type;
-
- (*f) ((VOID_STAR)&obj.v, ptr, 1);
-
- return SLang_push (&obj);
-}
-
-int SLang_pop_char (char *i)
-{
- return integer_pop (SLANG_CHAR_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_uchar (unsigned char *i)
-{
- return integer_pop (SLANG_UCHAR_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_short (short *i)
-{
- return integer_pop (SLANG_SHORT_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_ushort (unsigned short *i)
-{
- return integer_pop (SLANG_USHORT_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_long (long *i)
-{
- return integer_pop (SLANG_LONG_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_ulong (unsigned long *i)
-{
- return integer_pop (SLANG_ULONG_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_integer (int *i)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
- SLang_Object_Type obj;
-
- if (-1 == _SLang_pop_object_of_type (SLANG_INT_TYPE, &obj, 0))
- return -1;
- *i = obj.v.int_val;
- return 0;
-#else
- return integer_pop (SLANG_INT_TYPE, (VOID_STAR) i);
-#endif
-}
-
-int SLang_pop_uinteger (unsigned int *i)
-{
- return integer_pop (SLANG_UINT_TYPE, (VOID_STAR) i);
-}
-
-int SLang_push_integer (int i)
-{
- return SLclass_push_int_obj (SLANG_INT_TYPE, i);
-}
-int SLang_push_uinteger (unsigned int i)
-{
- return SLclass_push_int_obj (SLANG_UINT_TYPE, (int) i);
-}
-int SLang_push_char (char i)
-{
- return SLclass_push_char_obj (SLANG_CHAR_TYPE, i);
-}
-int SLang_push_uchar (unsigned char i)
-{
- return SLclass_push_char_obj (SLANG_UCHAR_TYPE, (char) i);
-}
-int SLang_push_short (short i)
-{
- return SLclass_push_short_obj (SLANG_SHORT_TYPE, i);
-}
-int SLang_push_ushort (unsigned short i)
-{
- return SLclass_push_short_obj (SLANG_USHORT_TYPE, (unsigned short) i);
-}
-int SLang_push_long (long i)
-{
- return SLclass_push_long_obj (SLANG_LONG_TYPE, i);
-}
-int SLang_push_ulong (unsigned long i)
-{
- return SLclass_push_long_obj (SLANG_ULONG_TYPE, (long) i);
-}
-
-_INLINE_
-int _SLarith_typecast (unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp)
-{
- int i, j;
-
- void (*copy)(VOID_STAR, VOID_STAR, unsigned int);
-
- i = Type_Precedence_Table[a_type];
- j = Type_Precedence_Table[b_type];
-
- copy = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
- Binary_Matrix[i][j].copy_function;
-
- (*copy) (bp, ap, na);
- return 1;
-}
-
-#if SLANG_HAS_FLOAT
-
-int SLang_pop_double(double *x, int *convertp, int *ip)
-{
- SLang_Object_Type obj;
- int i, convert;
-
- if (0 != SLang_pop (&obj))
- return -1;
-
- i = 0;
- convert = 0;
-
- switch (obj.data_type)
- {
- case SLANG_FLOAT_TYPE:
- *x = (double) obj.v.float_val;
- break;
-
- case SLANG_DOUBLE_TYPE:
- *x = obj.v.double_val;
- break;
-
- case SLANG_INT_TYPE:
- i = (int) obj.v.long_val;
- *x = (double) i;
- convert = 1;
- break;
-
- case SLANG_CHAR_TYPE: *x = (double) obj.v.char_val; break;
- case SLANG_UCHAR_TYPE: *x = (double) obj.v.uchar_val; break;
- case SLANG_SHORT_TYPE: *x = (double) obj.v.short_val; break;
- case SLANG_USHORT_TYPE: *x = (double) obj.v.ushort_val; break;
- case SLANG_UINT_TYPE: *x = (double) obj.v.uint_val; break;
- case SLANG_LONG_TYPE: *x = (double) obj.v.long_val; break;
- case SLANG_ULONG_TYPE: *x = (double) obj.v.ulong_val; break;
-
- default:
- _SLclass_type_mismatch_error (SLANG_DOUBLE_TYPE, obj.data_type);
- SLang_free_object (&obj);
- return -1;
- }
-
- if (convertp != NULL) *convertp = convert;
- if (ip != NULL) *ip = i;
-
- return 0;
-}
-
-int SLang_push_double (double x)
-{
- return SLclass_push_double_obj (SLANG_DOUBLE_TYPE, x);
-}
-
-int SLang_pop_float (float *x)
-{
- double d;
-
- /* Pop it as a double and let the double function do all the typcasting */
- if (-1 == SLang_pop_double (&d, NULL, NULL))
- return -1;
-
- *x = (float) d;
- return 0;
-}
-
-int SLang_push_float (float f)
-{
- return SLclass_push_float_obj (SLANG_FLOAT_TYPE, (double) f);
-}
-
-/* Double */
-static int double_push (unsigned char unused, VOID_STAR ptr)
-{
- (void) unused;
- SLang_push_double (*(double *) ptr);
- return 0;
-}
-
-static int double_push_literal (unsigned char type, VOID_STAR ptr)
-{
- (void) type;
- return SLang_push_double (**(double **)ptr);
-}
-
-static int double_pop (unsigned char unused, VOID_STAR ptr)
-{
- (void) unused;
- return SLang_pop_double ((double *) ptr, NULL, NULL);
-}
-
-static void double_byte_code_destroy (unsigned char unused, VOID_STAR ptr)
-{
- (void) unused;
- SLfree (*(char **) ptr);
-}
-
-static int float_push (unsigned char unused, VOID_STAR ptr)
-{
- (void) unused;
- SLang_push_float (*(float *) ptr);
- return 0;
-}
-
-static int float_pop (unsigned char unused, VOID_STAR ptr)
-{
- (void) unused;
- return SLang_pop_float ((float *) ptr);
-}
-
-#endif /* SLANG_HAS_FLOAT */
-
-#if SLANG_HAS_FLOAT
-static char Double_Format[16] = "%g";
-
-void _SLset_double_format (char *s)
-{
- strncpy (Double_Format, s, 15);
- Double_Format[15] = 0;
-}
-#endif
-
-static char *arith_string (unsigned char type, VOID_STAR v)
-{
- char buf [256];
- char *s;
-
- s = buf;
-
- switch (type)
- {
- default:
- s = SLclass_get_datatype_name (type);
- break;
-
- case SLANG_CHAR_TYPE:
- sprintf (s, "%d", *(char *) v);
- break;
- case SLANG_UCHAR_TYPE:
- sprintf (s, "%u", *(unsigned char *) v);
- break;
- case SLANG_SHORT_TYPE:
- sprintf (s, "%d", *(short *) v);
- break;
- case SLANG_USHORT_TYPE:
- sprintf (s, "%u", *(unsigned short *) v);
- break;
- case SLANG_INT_TYPE:
- sprintf (s, "%d", *(int *) v);
- break;
- case SLANG_UINT_TYPE:
- sprintf (s, "%u", *(unsigned int *) v);
- break;
- case SLANG_LONG_TYPE:
- sprintf (s, "%ld", *(long *) v);
- break;
- case SLANG_ULONG_TYPE:
- sprintf (s, "%lu", *(unsigned long *) v);
- break;
-#if SLANG_HAS_FLOAT
- case SLANG_FLOAT_TYPE:
- if (EOF == _SLsnprintf (buf, sizeof (buf), Double_Format, *(float *) v))
- sprintf (s, "%e", *(float *) v);
- break;
- case SLANG_DOUBLE_TYPE:
- if (EOF == _SLsnprintf (buf, sizeof (buf), Double_Format, *(double *) v))
- sprintf (s, "%e", *(double *) v);
- break;
-#endif
- }
-
- return SLmake_string (s);
-}
-
-static int integer_to_bool (unsigned char type, int *t)
-{
- (void) type;
- return SLang_pop_integer (t);
-}
-
-static int push_int_literal (unsigned char type, VOID_STAR ptr)
-{
- return SLclass_push_int_obj (type, (int) *(long *) ptr);
-}
-
-static int push_char_literal (unsigned char type, VOID_STAR ptr)
-{
- return SLclass_push_char_obj (type, (char) *(long *) ptr);
-}
-
-#if SIZEOF_SHORT != SIZEOF_INT
-static int push_short_literal (unsigned char type, VOID_STAR ptr)
-{
- return SLclass_push_short_obj (type, (short) *(long *) ptr);
-}
-#endif
-
-#if SIZEOF_INT != SIZEOF_LONG
-static int push_long_literal (unsigned char type, VOID_STAR ptr)
-{
- return SLclass_push_long_obj (type, *(long *) ptr);
-}
-#endif
-
-typedef struct
-{
- char *name;
- unsigned char data_type;
- unsigned int sizeof_type;
- int (*unary_fun)(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
- int (*push_literal) (unsigned char, VOID_STAR);
- int (*cmp_fun) (unsigned char, VOID_STAR, VOID_STAR, int *);
-}
-Integer_Info_Type;
-
-static Integer_Info_Type Integer_Types [8] =
-{
- {"Char_Type", SLANG_CHAR_TYPE, sizeof (char), char_unary_op, push_char_literal, char_cmp_function},
- {"UChar_Type", SLANG_UCHAR_TYPE, sizeof (unsigned char), uchar_unary_op, push_char_literal, uchar_cmp_function},
-#if SIZEOF_INT != SIZEOF_SHORT
- {"Short_Type", SLANG_SHORT_TYPE, sizeof (short), short_unary_op, push_short_literal, short_cmp_function},
- {"UShort_Type", SLANG_USHORT_TYPE, sizeof (unsigned short), ushort_unary_op, push_short_literal, ushort_cmp_function},
-#else
- {NULL, SLANG_SHORT_TYPE},
- {NULL, SLANG_USHORT_TYPE},
-#endif
-
- {"Integer_Type", SLANG_INT_TYPE, sizeof (int), int_unary_op, push_int_literal, int_cmp_function},
- {"UInteger_Type", SLANG_UINT_TYPE, sizeof (unsigned int), uint_unary_op, push_int_literal, uint_cmp_function},
-
-#if SIZEOF_INT != SIZEOF_LONG
- {"Long_Type", SLANG_LONG_TYPE, sizeof (long), long_unary_op, push_long_literal, long_cmp_function},
- {"ULong_Type", SLANG_ULONG_TYPE, sizeof (unsigned long), ulong_unary_op, push_long_literal, ulong_cmp_function}
-#else
- {NULL, SLANG_LONG_TYPE, 0, NULL, NULL, NULL},
- {NULL, SLANG_ULONG_TYPE, 0, NULL, NULL, NULL}
-#endif
-};
-
-static int create_synonyms (void)
-{
- static char *names[8] =
- {
- "Int16_Type", "UInt16_Type", "Int32_Type", "UInt32_Type",
- "Int64_Type", "UInt64_Type",
- "Float32_Type", "Float64_Type"
- };
- int types[8];
- unsigned int i;
-
- memset ((char *) types, 0, sizeof (types));
-
- /* The assumption is that sizeof(unsigned X) == sizeof (X) */
-#if SIZEOF_INT == 2
- types[0] = SLANG_INT_TYPE;
- types[1] = SLANG_UINT_TYPE;
-#else
-# if SIZEOF_SHORT == 2
- types[0] = SLANG_SHORT_TYPE;
- types[1] = SLANG_USHORT_TYPE;
-# else
-# if SIZEOF_LONG == 2
- types[0] = SLANG_LONG_TYPE;
- types[1] = SLANG_ULONG_TYPE;
-# endif
-# endif
-#endif
-
-#if SIZEOF_INT == 4
- types[2] = SLANG_INT_TYPE;
- types[3] = SLANG_UINT_TYPE;
-#else
-# if SIZEOF_SHORT == 4
- types[2] = SLANG_SHORT_TYPE;
- types[3] = SLANG_USHORT_TYPE;
-# else
-# if SIZEOF_LONG == 4
- types[2] = SLANG_LONG_TYPE;
- types[3] = SLANG_ULONG_TYPE;
-# endif
-# endif
-#endif
-
-#if SIZEOF_INT == 8
- types[4] = SLANG_INT_TYPE;
- types[5] = SLANG_UINT_TYPE;
-#else
-# if SIZEOF_SHORT == 8
- types[4] = SLANG_SHORT_TYPE;
- types[5] = SLANG_USHORT_TYPE;
-# else
-# if SIZEOF_LONG == 8
- types[4] = SLANG_LONG_TYPE;
- types[5] = SLANG_ULONG_TYPE;
-# endif
-# endif
-#endif
-
-#if SLANG_HAS_FLOAT
-
-#if SIZEOF_FLOAT == 4
- types[6] = SLANG_FLOAT_TYPE;
-#else
-# if SIZEOF_DOUBLE == 4
- types[6] = SLANG_DOUBLE_TYPE;
-# endif
-#endif
-#if SIZEOF_FLOAT == 8
- types[7] = SLANG_FLOAT_TYPE;
-#else
-# if SIZEOF_DOUBLE == 8
- types[7] = SLANG_DOUBLE_TYPE;
-# endif
-#endif
-
-#endif
-
- if ((-1 == SLclass_create_synonym ("Int_Type", SLANG_INT_TYPE))
- || (-1 == SLclass_create_synonym ("UInt_Type", SLANG_UINT_TYPE)))
- return -1;
-
- for (i = 0; i < 8; i++)
- {
- if (types[i] == 0) continue;
-
- if (-1 == SLclass_create_synonym (names[i], types[i]))
- return -1;
- }
-
-#if SIZEOF_INT == SIZEOF_SHORT
- if ((-1 == SLclass_create_synonym ("Short_Type", SLANG_INT_TYPE))
- || (-1 == SLclass_create_synonym ("UShort_Type", SLANG_UINT_TYPE))
- || (-1 == _SLclass_copy_class (SLANG_SHORT_TYPE, SLANG_INT_TYPE))
- || (-1 == _SLclass_copy_class (SLANG_USHORT_TYPE, SLANG_UINT_TYPE)))
- return -1;
-#endif
-#if SIZEOF_INT == SIZEOF_LONG
- if ((-1 == SLclass_create_synonym ("Long_Type", SLANG_INT_TYPE))
- || (-1 == SLclass_create_synonym ("ULong_Type", SLANG_UINT_TYPE))
- || (-1 == _SLclass_copy_class (SLANG_LONG_TYPE, SLANG_INT_TYPE))
- || (-1 == _SLclass_copy_class (SLANG_ULONG_TYPE, SLANG_UINT_TYPE)))
- return -1;
-#endif
- return 0;
-}
-
-int _SLarith_register_types (void)
-{
- SLang_Class_Type *cl;
- int a_type, b_type;
- int i, j;
-
-#if defined(HAVE_SETLOCALE) && defined(LC_NUMERIC)
- /* make sure decimal point it used --- the parser requires it */
- (void) setlocale (LC_NUMERIC, "C");
-#endif
-
- for (i = 0; i < 8; i++)
- {
- Integer_Info_Type *info;
-
- info = Integer_Types + i;
-
- if (info->name == NULL)
- {
- /* This happens when the object is the same size as an integer
- * For this case, we really want to copy the integer class.
- * We will handle that when the synonym is created.
- */
- continue;
- }
-
- if (NULL == (cl = SLclass_allocate_class (info->name)))
- return -1;
-
- (void) SLclass_set_string_function (cl, arith_string);
- (void) SLclass_set_push_function (cl, integer_push);
- (void) SLclass_set_pop_function (cl, integer_pop);
- cl->cl_push_literal = info->push_literal;
- cl->cl_to_bool = integer_to_bool;
-
- cl->cl_cmp = info->cmp_fun;
-
- if (-1 == SLclass_register_class (cl, info->data_type, info->sizeof_type,
- SLANG_CLASS_TYPE_SCALAR))
- return -1;
- if (-1 == SLclass_add_unary_op (info->data_type, info->unary_fun, arith_unary_op_result))
- return -1;
-
- _SLarith_Is_Arith_Type [info->data_type] = 1;
- }
-
-#if SLANG_HAS_FLOAT
- if (NULL == (cl = SLclass_allocate_class ("Double_Type")))
- return -1;
- (void) SLclass_set_push_function (cl, double_push);
- (void) SLclass_set_pop_function (cl, double_pop);
- (void) SLclass_set_string_function (cl, arith_string);
- cl->cl_byte_code_destroy = double_byte_code_destroy;
- cl->cl_push_literal = double_push_literal;
- cl->cl_cmp = double_cmp_function;
-
- if (-1 == SLclass_register_class (cl, SLANG_DOUBLE_TYPE, sizeof (double),
- SLANG_CLASS_TYPE_SCALAR))
- return -1;
- if (-1 == SLclass_add_unary_op (SLANG_DOUBLE_TYPE, double_unary_op, arith_unary_op_result))
- return -1;
- _SLarith_Is_Arith_Type [SLANG_DOUBLE_TYPE] = 2;
-
- if (NULL == (cl = SLclass_allocate_class ("Float_Type")))
- return -1;
- (void) SLclass_set_string_function (cl, arith_string);
- (void) SLclass_set_push_function (cl, float_push);
- (void) SLclass_set_pop_function (cl, float_pop);
- cl->cl_cmp = float_cmp_function;
-
- if (-1 == SLclass_register_class (cl, SLANG_FLOAT_TYPE, sizeof (float),
- SLANG_CLASS_TYPE_SCALAR))
- return -1;
- if (-1 == SLclass_add_unary_op (SLANG_FLOAT_TYPE, float_unary_op, arith_unary_op_result))
- return -1;
- _SLarith_Is_Arith_Type [SLANG_FLOAT_TYPE] = 2;
-#endif
-
- if (-1 == create_synonyms ())
- return -1;
-
- for (a_type = 0; a_type <= MAXIMUM_ARITH_TYPE_VALUE; a_type++)
- {
- if (-1 == (i = Type_Precedence_Table [a_type]))
- continue;
-
- for (b_type = 0; b_type <= MAXIMUM_ARITH_TYPE_VALUE; b_type++)
- {
- int implicit_ok;
-
- if (-1 == (j = Type_Precedence_Table [b_type]))
- continue;
-
- /* Allow implicit typecast, except from into to float */
- implicit_ok = ((j >= FLOAT_PRECEDENCE_VALUE)
- || (i < FLOAT_PRECEDENCE_VALUE));
-
- if (-1 == SLclass_add_binary_op (a_type, b_type, arith_bin_op, arith_bin_op_result))
- return -1;
-
- if (i != j)
- if (-1 == SLclass_add_typecast (a_type, b_type, _SLarith_typecast, implicit_ok))
- return -1;
- }
- }
-
- return 0;
-}
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-
-static void promote_objs (SLang_Object_Type *a, SLang_Object_Type *b,
- SLang_Object_Type *c, SLang_Object_Type *d)
-{
- unsigned char ia, ib, ic, id;
- int i, j;
- void (*copy)(VOID_STAR, VOID_STAR, unsigned int);
-
- ia = a->data_type;
- ib = b->data_type;
-
- ic = _SLarith_promote_type (ia);
-
- if (ic == ib) id = ic; /* already promoted */
- else id = _SLarith_promote_type (ib);
-
- i = Type_Precedence_Table[ic];
- j = Type_Precedence_Table[id];
- if (i > j)
- {
- id = ic;
- j = i;
- }
-
- c->data_type = d->data_type = id;
-
- i = Type_Precedence_Table[ia];
- copy = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
- Binary_Matrix[i][j].copy_function;
- (*copy) ((VOID_STAR) &c->v, (VOID_STAR)&a->v, 1);
-
- i = Type_Precedence_Table[ib];
- copy = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
- Binary_Matrix[i][j].copy_function;
- (*copy) ((VOID_STAR) &d->v, (VOID_STAR)&b->v, 1);
-}
-
-int _SLarith_bin_op (SLang_Object_Type *oa, SLang_Object_Type *ob, int op)
-{
- unsigned char a_type, b_type;
-
- a_type = oa->data_type;
- b_type = ob->data_type;
-
- if (a_type != b_type)
- {
- SLang_Object_Type obj_a, obj_b;
-
- /* Handle common cases */
- if ((a_type == SLANG_INT_TYPE)
- && (b_type == SLANG_DOUBLE_TYPE))
- return double_double_scalar_bin_op (oa->v.int_val, ob->v.double_val, op);
-
- if ((a_type == SLANG_DOUBLE_TYPE)
- && (b_type == SLANG_INT_TYPE))
- return double_double_scalar_bin_op (oa->v.double_val, ob->v.int_val, op);
-
- /* Otherwise do it the hard way */
- promote_objs (oa, ob, &obj_a, &obj_b);
- oa = &obj_a;
- ob = &obj_b;
-
- a_type = oa->data_type;
- b_type = ob->data_type;
- }
-
-
- switch (a_type)
- {
- case SLANG_CHAR_TYPE:
- return int_int_scalar_bin_op (oa->v.char_val, ob->v.char_val, op);
-
- case SLANG_UCHAR_TYPE:
- return int_int_scalar_bin_op (oa->v.uchar_val, ob->v.uchar_val, op);
-
- case SLANG_SHORT_TYPE:
- return int_int_scalar_bin_op (oa->v.short_val, ob->v.short_val, op);
-
- case SLANG_USHORT_TYPE:
-# if SIZEOF_INT == SIZEOF_SHORT
- return uint_uint_scalar_bin_op (oa->v.ushort_val, ob->v.ushort_val, op);
-# else
- return int_int_scalar_bin_op ((int)oa->v.ushort_val, (int)ob->v.ushort_val, op);
-# endif
-
-#if SIZEOF_LONG == SIZEOF_INT
- case SLANG_LONG_TYPE:
-#endif
- case SLANG_INT_TYPE:
- return int_int_scalar_bin_op (oa->v.int_val, ob->v.int_val, op);
-
-#if SIZEOF_LONG == SIZEOF_INT
- case SLANG_ULONG_TYPE:
-#endif
- case SLANG_UINT_TYPE:
- return uint_uint_scalar_bin_op (oa->v.uint_val, ob->v.uint_val, op);
-
-#if SIZEOF_LONG != SIZEOF_INT
- case SLANG_LONG_TYPE:
- return long_long_scalar_bin_op (oa->v.long_val, ob->v.long_val, op);
- case SLANG_ULONG_TYPE:
- return ulong_ulong_scalar_bin_op (oa->v.ulong_val, ob->v.ulong_val, op);
-#endif
- case SLANG_FLOAT_TYPE:
- return float_float_scalar_bin_op (oa->v.float_val, ob->v.float_val, op);
- case SLANG_DOUBLE_TYPE:
- return double_double_scalar_bin_op (oa->v.double_val, ob->v.double_val, op);
- }
-
- return 1;
-}
-#endif
diff --git a/mdk-stage1/slang/slarith.inc b/mdk-stage1/slang/slarith.inc
deleted file mode 100644
index efa8a5e04..000000000
--- a/mdk-stage1/slang/slarith.inc
+++ /dev/null
@@ -1,783 +0,0 @@
-/* -*- c -*- */
-
-/* This include file is a template for defining arithmetic binary operations
- * on arithmetic types. I realize that doing it this way is not very
- * elegant but it minimizes the number of lines of code and I believe it
- * promotes clarity.
- */
-
-/* The following macros should be properly defined before including this file:
- *
- * GENERIC_BINARY_FUNCTION: The name of the binary function
- * GENERIC_TYPE: The class data type
- * MOD_FUNCTION: The function to use for mod
- * ABS_FUNCTION: Name of the abs function
- * SIGN_FUNCTION: Name of the sign function
- * GENERIC_UNARY_FUNCTION Name of the unary function
- *
- * If GENERIC_BIT_OPERATIONS is defined, the bit-level binary operators
- * will get included. If the data type has a power operation (SLANG_POW),
- * then POW_FUNCTION should be defined to return POW_RESULT_TYPE.
- */
-#ifdef GENERIC_BINARY_FUNCTION
-
-static int GENERIC_BINARY_FUNCTION
-(int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- GENERIC_TYPE *c, *a, *b;
-#ifdef POW_FUNCTION
- POW_RESULT_TYPE *d;
-#endif
- unsigned int n;
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- unsigned int n_max, da, db;
-#endif
- char *cc;
-
- (void) a_type; /* Both SLANG_INT_TYPE */
- (void) b_type;
-
- a = (GENERIC_TYPE *) ap;
- b = (GENERIC_TYPE *) bp;
- c = (GENERIC_TYPE *) cp;
- cc = (char *) cp;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- if (na == 1) da = 0; else da = 1;
- if (nb == 1) db = 0; else db = 1;
-
- if (na > nb) n_max = na; else n_max = nb;
-#endif
-
- switch (op)
- {
- default:
- return 0;
-#ifdef POW_FUNCTION
- case SLANG_POW:
- d = (POW_RESULT_TYPE *) cp;
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- d[n] = POW_FUNCTION(*a, *b);
- a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- d[n] = POW_FUNCTION(a[n],b[n]);
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- if (xb == 2)
- for (n = 0; n < na; n++)
- d[n] = a[n] * a[n];
- else
- for (n = 0; n < na; n++)
- d[n] = POW_FUNCTION(a[n], xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- d[n] = POW_FUNCTION(xa, b[n]);
- }
-#endif
- break;
-#endif
- case SLANG_PLUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- c[n] = (*a + *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- c[n] = a[n] + b[n];
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- c[n] = a[n] + xb;
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- c[n] = xa + b[n];
- }
-#endif
- break;
-
- case SLANG_MINUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- c[n] = (*a - *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- c[n] = a[n] - b[n];
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- c[n] = a[n] - xb;
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- c[n] = xa - b[n];
- }
-#endif
- break;
-
- case SLANG_TIMES:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- c[n] = (*a * *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- c[n] = a[n] * b[n];
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- c[n] = a[n] * xb;
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- c[n] = xa * b[n];
- }
-#endif
- break;
-
- case SLANG_DIVIDE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- if (*b == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- c[n] = (*a / *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- {
- if (b[n] == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- c[n] = a[n] / b[n];
- }
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
-
- if (xb == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- for (n = 0; n < na; n++)
- c[n] = a[n] / xb;
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- {
- if (b[n] == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- c[n] = xa / b[n];
- }
- }
-#endif
- break;
-
- case SLANG_MOD:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- if (*b == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- c[n] = MOD_FUNCTION(*a, *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- {
- if (b[n] == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- c[n] = MOD_FUNCTION(a[n],b[n]);
- }
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- if (xb == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- for (n = 0; n < na; n++)
- c[n] = MOD_FUNCTION(a[n],xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- {
- if (b[n] == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- c[n] = MOD_FUNCTION(xa,b[n]);
- }
- }
-#endif
- break;
-
-#ifdef GENERIC_BIT_OPERATIONS
- case SLANG_BAND:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- c[n] = (*a & *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- c[n] = a[n] & b[n];
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- c[n] = a[n] & xb;
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- c[n] = xa & b[n];
- }
-#endif
- break;
-
- case SLANG_BXOR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- c[n] = (*a ^ *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- c[n] = a[n] ^ b[n];
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- c[n] = a[n] ^ xb;
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- c[n] = xa ^ b[n];
- }
-#endif
- break;
-
- case SLANG_BOR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- c[n] = (*a | *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- c[n] = a[n] | b[n];
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- c[n] = a[n] | xb;
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- c[n] = xa | b[n];
- }
-#endif
- break;
-
- case SLANG_SHL:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- c[n] = (*a << *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- c[n] = a[n] << b[n];
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- c[n] = a[n] << xb;
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- c[n] = xa << b[n];
- }
-#endif
- break;
-
- case SLANG_SHR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- c[n] = (*a >> *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- c[n] = a[n] >> b[n];
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- c[n] = a[n] >> xb;
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- c[n] = xa >> b[n];
- }
-#endif
- break;
-#endif /* GENERIC_BIT_OPERATIONS */
- case SLANG_EQ:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- cc[n] = (*a == *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- cc[n] = (a[n] == b[n]);
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- cc[n] = (a[n] == xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- cc[n] = (xa == b[n]);
- }
-#endif
- break;
-
- case SLANG_NE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- cc[n] = (*a != *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- cc[n] = (a[n] != b[n]);
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- cc[n] = (a[n] != xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- cc[n] = (xa != b[n]);
- }
-#endif
- break;
-
- case SLANG_GT:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- cc[n] = (*a > *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- cc[n] = (a[n] > b[n]);
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- cc[n] = (a[n] > xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- cc[n] = (xa > b[n]);
- }
-#endif
- break;
-
- case SLANG_GE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- cc[n] = (*a >= *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- cc[n] = (a[n] >= b[n]);
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- cc[n] = (a[n] >= xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- cc[n] = (xa >= b[n]);
- }
-#endif
- break;
-
- case SLANG_LT:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- cc[n] = (*a < *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- cc[n] = (a[n] < b[n]);
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- cc[n] = (a[n] < xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- cc[n] = (xa < b[n]);
- }
-#endif
- break;
-
- case SLANG_LE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- cc[n] = (*a <= *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- cc[n] = (a[n] <= b[n]);
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- cc[n] = (a[n] <= xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- cc[n] = (xa <= b[n]);
- }
-#endif
- break;
-
- case SLANG_OR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- cc[n] = (*a || *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- cc[n] = (a[n] || b[n]);
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- cc[n] = (a[n] || xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- cc[n] = (xa || b[n]);
- }
-#endif
- break;
-
- case SLANG_AND:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
- for (n = 0; n < n_max; n++)
- {
- cc[n] = (*a && *b); a += da; b += db;
- }
-#else
- if (na == nb)
- {
- for (n = 0; n < na; n++)
- cc[n] = (a[n] && b[n]);
- }
- else if (nb == 1)
- {
- GENERIC_TYPE xb = *b;
- for (n = 0; n < na; n++)
- cc[n] = (a[n] && xb);
- }
- else /* if (na == 1) */
- {
- GENERIC_TYPE xa = *a;
- for (n = 0; n < nb; n++)
- cc[n] = (xa && b[n]);
- }
-#endif
- break;
- }
- return 1;
-}
-
-#endif /* GENERIC_BINARY_FUNCTION */
-
-
-#ifdef GENERIC_UNARY_FUNCTION
-
-static int GENERIC_UNARY_FUNCTION
-(int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- VOID_STAR bp
- )
-{
- GENERIC_TYPE *a, *b;
- unsigned int n;
- int *ib;
-
- (void) a_type;
-
- a = (GENERIC_TYPE *) ap;
- b = (GENERIC_TYPE *) bp;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_PLUSPLUS:
- for (n = 0; n < na; n++) b[n] = (a[n] + 1);
- break;
- case SLANG_MINUSMINUS:
- for (n = 0; n < na; n++) b[n] = (a[n] - 1);
- break;
- case SLANG_CHS:
- for (n = 0; n < na; n++) b[n] = (GENERIC_TYPE) -(a[n]);
- break;
- case SLANG_SQR:
- for (n = 0; n < na; n++) b[n] = (a[n] * a[n]);
- break;
- case SLANG_MUL2:
- for (n = 0; n < na; n++) b[n] = (2 * a[n]);
- break;
- case SLANG_ABS:
- for (n = 0; n < na; n++) b[n] = ABS_FUNCTION (a[n]);
- break;
- case SLANG_SIGN:
- ib = (int *) bp;
- for (n = 0; n < na; n++)
- ib[n] = SIGN_FUNCTION(a[n]);
- break;
-
-#ifdef GENERIC_BIT_OPERATIONS
- case SLANG_NOT:
- for (n = 0; n < na; n++) b[n] = !(a[n]);
- break;
- case SLANG_BNOT:
- for (n = 0; n < na; n++) b[n] = ~(a[n]);
- break;
-#endif
- }
-
- return 1;
-}
-#endif /* GENERIC_UNARY_FUNCTION */
-
-
-#ifdef SCALAR_BINARY_FUNCTION
-
-static int SCALAR_BINARY_FUNCTION (GENERIC_TYPE a, GENERIC_TYPE b, int op)
-{
- switch (op)
- {
- default:
- return 1;
-
-#ifdef POW_FUNCTION
- case SLANG_POW:
- return PUSH_POW_OBJ_FUN(POW_FUNCTION(a, b));
-#endif
- case SLANG_PLUS:
- return PUSH_SCALAR_OBJ_FUN (a + b);
- case SLANG_MINUS:
- return PUSH_SCALAR_OBJ_FUN (a - b);
- case SLANG_TIMES:
- return PUSH_SCALAR_OBJ_FUN (a * b);
- case SLANG_DIVIDE:
- if (b == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- return PUSH_SCALAR_OBJ_FUN (a / b);
- case SLANG_MOD:
- if (b == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- return PUSH_SCALAR_OBJ_FUN (MOD_FUNCTION(a,b));
-#ifdef GENERIC_BIT_OPERATIONS
- case SLANG_BAND:
- return PUSH_SCALAR_OBJ_FUN (a & b);
- case SLANG_BXOR:
- return PUSH_SCALAR_OBJ_FUN (a ^ b);
- case SLANG_BOR:
- return PUSH_SCALAR_OBJ_FUN (a | b);
- case SLANG_SHL:
- return PUSH_SCALAR_OBJ_FUN (a << b);
- case SLANG_SHR:
- return PUSH_SCALAR_OBJ_FUN (a >> b);
-#endif
- case SLANG_GT: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a > b));
- case SLANG_LT: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a < b));
- case SLANG_GE: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a >= b));
- case SLANG_LE: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a <= b));
- case SLANG_EQ: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a == b));
- case SLANG_NE: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a != b));
- case SLANG_OR: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a || b));
- case SLANG_AND: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a && b));
- }
-}
-
-#endif /* SCALAR_BINARY_FUNCTION */
-
-#ifdef CMP_FUNCTION
-static int CMP_FUNCTION (unsigned char unused, VOID_STAR a, VOID_STAR b, int *c)
-{
- GENERIC_TYPE x, y;
-
- (void) unused;
- x = *(GENERIC_TYPE *) a;
- y = *(GENERIC_TYPE *) b;
-
- if (x > y) *c = 1;
- else if (x == y) *c = 0;
- else *c = -1;
-
- return 0;
-}
-#endif
-
-#undef CMP_FUNCTION
-#undef SCALAR_BINARY_FUNCTION
-#undef PUSH_POW_OBJ_FUN
-#undef PUSH_SCALAR_OBJ_FUN
-#undef GENERIC_BINARY_FUNCTION
-#undef GENERIC_UNARY_FUNCTION
-#undef GENERIC_BIT_OPERATIONS
-#undef GENERIC_TYPE
-#undef POW_FUNCTION
-#undef POW_RESULT_TYPE
-#undef MOD_FUNCTION
-#undef ABS_FUNCTION
-#undef SIGN_FUNCTION
diff --git a/mdk-stage1/slang/slarray.c b/mdk-stage1/slang/slarray.c
deleted file mode 100644
index 0b9a1406c..000000000
--- a/mdk-stage1/slang/slarray.c
+++ /dev/null
@@ -1,3139 +0,0 @@
-/* Array manipulation routines for S-Lang */
-/* Copyright (c) 1997, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct
-{
- int first_index;
- int last_index;
- int delta;
-}
-SLarray_Range_Array_Type;
-
-/* Use SLang_pop_array when a linear array is required. */
-static int pop_array (SLang_Array_Type **at_ptr, int convert_scalar)
-{
- SLang_Array_Type *at;
- int one = 1;
- int type;
-
- *at_ptr = NULL;
- type = SLang_peek_at_stack ();
-
- switch (type)
- {
- case -1:
- return -1;
-
- case SLANG_ARRAY_TYPE:
- return SLclass_pop_ptr_obj (SLANG_ARRAY_TYPE, (VOID_STAR *) at_ptr);
-
- case SLANG_NULL_TYPE:
- convert_scalar = 0;
- /* drop */
- default:
- if (convert_scalar == 0)
- {
- SLdo_pop ();
- SLang_verror (SL_TYPE_MISMATCH, "Context requires an array. Scalar not converted");
- return -1;
- }
- break;
- }
-
- if (NULL == (at = SLang_create_array ((unsigned char) type, 0, NULL, &one, 1)))
- return -1;
-
- if (-1 == at->cl->cl_apop ((unsigned char) type, at->data))
- {
- SLang_free_array (at);
- return -1;
- }
-
- *at_ptr = at;
-
- return 0;
-}
-
-static VOID_STAR linear_get_data_addr (SLang_Array_Type *at, int *dims)
-{
- unsigned int num_dims;
- unsigned int ofs;
- unsigned int i;
- int *max_dims;
-
- ofs = 0;
- max_dims = at->dims;
- num_dims = at->num_dims;
-
- for (i = 0; i < num_dims; i++)
- {
- int d = dims[i];
-
- if (d < 0)
- d = d + max_dims[i];
-
- ofs = ofs * (unsigned int)max_dims [i] + (unsigned int) d;
- }
-
- return (VOID_STAR) ((char *)at->data + (ofs * at->sizeof_type));
-}
-
-static VOID_STAR get_data_addr (SLang_Array_Type *at, int *dims)
-{
- VOID_STAR data;
-
- data = at->data;
- if (data == NULL)
- {
- SLang_verror (SL_UNKNOWN_ERROR, "Array has no data");
- return NULL;
- }
-
- data = (*at->index_fun) (at, dims);
-
- if (data == NULL)
- {
- SLang_verror (SL_UNKNOWN_ERROR, "Unable to access array element");
- return NULL;
- }
-
- return data;
-}
-
-void _SLarray_free_array_elements (SLang_Class_Type *cl, VOID_STAR s, unsigned int num)
-{
- unsigned int sizeof_type;
- void (*f) (unsigned char, VOID_STAR);
- char *p;
- unsigned char type;
-
- if ((cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
- || (cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR))
- return;
-
- f = cl->cl_destroy;
- sizeof_type = cl->cl_sizeof_type;
- type = cl->cl_data_type;
-
- p = (char *) s;
- while (num != 0)
- {
- if (NULL != *(VOID_STAR *)p)
- {
- (*f) (type, (VOID_STAR)p);
- *(VOID_STAR *) p = NULL;
- }
- p += sizeof_type;
- num--;
- }
-}
-
-static int destroy_element (SLang_Array_Type *at,
- int *dims,
- VOID_STAR data)
-{
- data = get_data_addr (at, dims);
- if (data == NULL)
- return -1;
-
- /* This function should only get called for arrays that have
- * pointer elements. Do not call the destroy method if the element
- * is NULL.
- */
- if (NULL != *(VOID_STAR *)data)
- {
- (*at->cl->cl_destroy) (at->data_type, data);
- *(VOID_STAR *) data = NULL;
- }
- return 0;
-}
-
-/* This function only gets called when a new array is created. Thus there
- * is no need to destroy the object first.
- */
-static int new_object_element (SLang_Array_Type *at,
- int *dims,
- VOID_STAR data)
-{
- data = get_data_addr (at, dims);
- if (data == NULL)
- return -1;
-
- return (*at->cl->cl_init_array_object) (at->data_type, data);
-}
-
-static int next_index (int *dims, int *max_dims, unsigned int num_dims)
-{
- while (num_dims)
- {
- int dims_i;
-
- num_dims--;
-
- dims_i = dims [num_dims] + 1;
- if (dims_i != (int) max_dims [num_dims])
- {
- dims [num_dims] = dims_i;
- return 0;
- }
- dims [num_dims] = 0;
- }
-
- return -1;
-}
-
-static int do_method_for_all_elements (SLang_Array_Type *at,
- int (*method)(SLang_Array_Type *,
- int *,
- VOID_STAR),
- VOID_STAR client_data)
-{
- int dims [SLARRAY_MAX_DIMS];
- int *max_dims;
- unsigned int num_dims;
-
- if (at->num_elements == 0)
- return 0;
-
- max_dims = at->dims;
- num_dims = at->num_dims;
-
- SLMEMSET((char *)dims, 0, sizeof(dims));
-
- do
- {
- if (-1 == (*method) (at, dims, client_data))
- return -1;
- }
- while (0 == next_index (dims, max_dims, num_dims));
-
- return 0;
-}
-
-void SLang_free_array (SLang_Array_Type *at)
-{
- VOID_STAR data;
- unsigned int flags;
-
- if (at == NULL) return;
-
- if (at->num_refs > 1)
- {
- at->num_refs -= 1;
- return;
- }
-
- data = at->data;
- flags = at->flags;
-
- if (flags & SLARR_DATA_VALUE_IS_INTRINSIC)
- return; /* not to be freed */
-
- if (flags & SLARR_DATA_VALUE_IS_POINTER)
- (void) do_method_for_all_elements (at, destroy_element, NULL);
-
- SLfree ((char *) data);
- SLfree ((char *) at);
-}
-
-SLang_Array_Type *
-SLang_create_array1 (unsigned char type, int read_only, VOID_STAR data,
- int *dims, unsigned int num_dims, int no_init)
-{
- SLang_Class_Type *cl;
- unsigned int i;
- SLang_Array_Type *at;
- unsigned int num_elements;
- unsigned int sizeof_type;
- unsigned int size;
-
- if (num_dims > SLARRAY_MAX_DIMS)
- {
- SLang_verror (SL_NOT_IMPLEMENTED, "%u dimensional arrays are not supported", num_dims);
- return NULL;
- }
-
- for (i = 0; i < num_dims; i++)
- {
- if (dims[i] < 0)
- {
- SLang_verror (SL_INVALID_PARM, "Size of array dim %u is less than 0", i);
- return NULL;
- }
- }
-
- cl = _SLclass_get_class (type);
-
- at = (SLang_Array_Type *) SLmalloc (sizeof(SLang_Array_Type));
- if (at == NULL)
- return NULL;
-
- SLMEMSET ((char*) at, 0, sizeof(SLang_Array_Type));
-
- at->data_type = type;
- at->cl = cl;
- at->num_dims = num_dims;
- at->num_refs = 1;
-
- if (read_only) at->flags = SLARR_DATA_VALUE_IS_READ_ONLY;
- switch (cl->cl_class_type)
- {
- case SLANG_CLASS_TYPE_VECTOR:
- case SLANG_CLASS_TYPE_SCALAR:
- break;
-
- default:
- at->flags |= SLARR_DATA_VALUE_IS_POINTER;
- }
-
- num_elements = 1;
- for (i = 0; i < num_dims; i++)
- {
- at->dims [i] = dims[i];
- num_elements = dims [i] * num_elements;
- }
-
- /* Now set the rest of the unused dimensions to 1. This makes it easier
- * when transposing arrays.
- */
- while (i < SLARRAY_MAX_DIMS)
- at->dims[i++] = 1;
-
- at->num_elements = num_elements;
- at->index_fun = linear_get_data_addr;
- at->sizeof_type = sizeof_type = cl->cl_sizeof_type;
-
- if (data != NULL)
- {
- at->data = data;
- return at;
- }
-
- size = num_elements * sizeof_type;
-
- if (size == 0) size = 1;
-
- if (NULL == (data = (VOID_STAR) SLmalloc (size)))
- {
- SLang_free_array (at);
- return NULL;
- }
-
- if (no_init == 0)
- SLMEMSET ((char *) data, 0, size);
-
- at->data = data;
-
- if ((cl->cl_init_array_object != NULL)
- && (-1 == do_method_for_all_elements (at, new_object_element, NULL)))
- {
- SLang_free_array (at);
- return NULL;
- }
- return at;
-}
-
-SLang_Array_Type *
-SLang_create_array (unsigned char type, int read_only, VOID_STAR data,
- int *dims, unsigned int num_dims)
-{
- return SLang_create_array1 (type, read_only, data, dims, num_dims, 0);
-}
-
-int SLang_add_intrinsic_array (char *name,
- unsigned char type,
- int read_only,
- VOID_STAR data,
- unsigned int num_dims, ...)
-{
- va_list ap;
- unsigned int i;
- int dims[SLARRAY_MAX_DIMS];
- SLang_Array_Type *at;
-
- if ((num_dims > SLARRAY_MAX_DIMS)
- || (name == NULL)
- || (data == NULL))
- {
- SLang_verror (SL_INVALID_PARM, "Unable to create intrinsic array");
- return -1;
- }
-
- va_start (ap, num_dims);
- for (i = 0; i < num_dims; i++)
- dims [i] = va_arg (ap, int);
- va_end (ap);
-
- at = SLang_create_array (type, read_only, data, dims, num_dims);
- if (at == NULL)
- return -1;
- at->flags |= SLARR_DATA_VALUE_IS_INTRINSIC;
-
- /* Note: The variable that refers to the intrinsic array is regarded as
- * read-only. That way, Array_Name = another_array; will fail.
- */
- if (-1 == SLadd_intrinsic_variable (name, (VOID_STAR) at, SLANG_ARRAY_TYPE, 1))
- {
- SLang_free_array (at);
- return -1;
- }
- return 0;
-}
-
-static int pop_array_indices (int *dims, unsigned int num_dims)
-{
- unsigned int n;
- int i;
-
- if (num_dims > SLARRAY_MAX_DIMS)
- {
- SLang_verror (SL_INVALID_PARM, "Array size not supported");
- return -1;
- }
-
- n = num_dims;
- while (n != 0)
- {
- n--;
- if (-1 == SLang_pop_integer (&i))
- return -1;
-
- dims[n] = i;
- }
-
- return 0;
-}
-
-int SLang_push_array (SLang_Array_Type *at, int free_flag)
-{
- if (at == NULL)
- return SLang_push_null ();
-
- at->num_refs += 1;
-
- if (0 == SLclass_push_ptr_obj (SLANG_ARRAY_TYPE, (VOID_STAR) at))
- {
- if (free_flag)
- SLang_free_array (at);
- return 0;
- }
-
- at->num_refs -= 1;
-
- if (free_flag) SLang_free_array (at);
- return -1;
-}
-
-/* This function gets called via expressions such as Double_Type[10, 20];
- */
-static int push_create_new_array (void)
-{
- unsigned int num_dims;
- SLang_Array_Type *at;
- unsigned char type;
- int dims [SLARRAY_MAX_DIMS];
- int (*anew) (unsigned char, unsigned int);
-
- num_dims = (SLang_Num_Function_Args - 1);
-
- if (-1 == _SLang_pop_datatype (&type))
- return -1;
-
- anew = (_SLclass_get_class (type))->cl_anew;
- if (anew != NULL)
- return (*anew) (type, num_dims);
-
- if (-1 == pop_array_indices (dims, num_dims))
- return -1;
-
- if (NULL == (at = SLang_create_array (type, 0, NULL, dims, num_dims)))
- return -1;
-
- return SLang_push_array (at, 1);
-}
-
-static int push_element_at_addr (SLang_Array_Type *at,
- VOID_STAR data, int allow_null)
-{
- SLang_Class_Type *cl;
-
- cl = at->cl;
- if ((at->flags & SLARR_DATA_VALUE_IS_POINTER)
- && (*(VOID_STAR *) data == NULL))
- {
- if (allow_null)
- return SLang_push_null ();
-
- SLang_verror (SL_VARIABLE_UNINITIALIZED,
- "%s array has unitialized element", cl->cl_name);
- return -1;
- }
-
- return (*cl->cl_apush)(at->data_type, data);
-}
-
-static int coerse_array_to_linear (SLang_Array_Type *at)
-{
- SLarray_Range_Array_Type *range;
- int *data;
- int xmin, dx;
- unsigned int i, imax;
-
- /* FIXME: Priority = low. This assumes that if an array is not linear, then
- * it is a range.
- */
- if (0 == (at->flags & SLARR_DATA_VALUE_IS_RANGE))
- return 0;
-
- range = (SLarray_Range_Array_Type *) at->data;
- xmin = range->first_index;
- dx = range->delta;
-
- imax = at->num_elements;
- data = (int *) SLmalloc ((imax + 1) * sizeof (int));
- if (data == NULL)
- return -1;
-
- for (i = 0; i < imax; i++)
- {
- data [i] = xmin;
- xmin += dx;
- }
-
- SLfree ((char *) range);
- at->data = (VOID_STAR) data;
- at->flags &= ~SLARR_DATA_VALUE_IS_RANGE;
- at->index_fun = linear_get_data_addr;
- return 0;
-}
-
-static void
-free_index_objects (SLang_Object_Type *index_objs, unsigned int num_indices)
-{
- unsigned int i;
- SLang_Object_Type *obj;
-
- for (i = 0; i < num_indices; i++)
- {
- obj = index_objs + i;
- if (obj->data_type != 0)
- SLang_free_object (obj);
- }
-}
-
-static int
-pop_indices (SLang_Object_Type *index_objs, unsigned int num_indices,
- int *is_index_array)
-{
- unsigned int i;
-
- SLMEMSET((char *) index_objs, 0, num_indices * sizeof (SLang_Object_Type));
-
- *is_index_array = 0;
-
- if (num_indices >= SLARRAY_MAX_DIMS)
- {
- SLang_verror (SL_INVALID_PARM, "too many indices for array");
- return -1;
- }
-
- i = num_indices;
- while (i != 0)
- {
- SLang_Object_Type *obj;
-
- i--;
- obj = index_objs + i;
- if (-1 == _SLang_pop_object_of_type (SLANG_INT_TYPE, obj, 1))
- goto return_error;
-
- if (obj->data_type == SLANG_ARRAY_TYPE)
- {
- SLang_Array_Type *at = obj->v.array_val;
-
- if (at->num_dims == 1)
- {
- if ((num_indices == 1)
- && (0 == (at->flags & SLARR_DATA_VALUE_IS_RANGE)))
- *is_index_array = 1;
- }
- else
- {
- SLang_verror (SL_INVALID_PARM, "expecting a 1-d index array");
- goto return_error;
- }
- }
- }
-
- return 0;
-
- return_error:
- free_index_objects (index_objs, num_indices);
- return -1;
-}
-
-/* Here ind_at is a linear 1-d array of indices */
-static int
-check_index_array_ranges (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
- int *indices, *indices_max;
- unsigned int num_elements;
-
- num_elements = at->num_elements;
- indices = (int *) ind_at->data;
- indices_max = indices + ind_at->num_elements;
-
- while (indices < indices_max)
- {
- unsigned int d;
-
- d = (unsigned int) *indices++;
- if (d >= num_elements)
- {
- SLang_verror (SL_INVALID_PARM,
- "index-array is out of range");
- return -1;
- }
- }
- return 0;
-}
-
-static int
-transfer_n_elements (SLang_Array_Type *at, VOID_STAR dest_data, VOID_STAR src_data,
- unsigned int sizeof_type, unsigned int n, int is_ptr)
-{
- unsigned char data_type;
- SLang_Class_Type *cl;
-
- if (is_ptr == 0)
- {
- SLMEMCPY ((char *) dest_data, (char *)src_data, n * sizeof_type);
- return 0;
- }
-
- data_type = at->data_type;
- cl = at->cl;
-
- while (n != 0)
- {
- if (*(VOID_STAR *)dest_data != NULL)
- {
- (*cl->cl_destroy) (data_type, dest_data);
- *(VOID_STAR *) dest_data = NULL;
- }
-
- if (*(VOID_STAR *) src_data == NULL)
- *(VOID_STAR *) dest_data = NULL;
- else
- {
- if (-1 == (*cl->cl_acopy) (data_type, src_data, dest_data))
- /* No need to destroy anything */
- return -1;
- }
-
- src_data = (VOID_STAR) ((char *)src_data + sizeof_type);
- dest_data = (VOID_STAR) ((char *)dest_data + sizeof_type);
-
- n--;
- }
-
- return 0;
-}
-
-int
-_SLarray_aget_transfer_elem (SLang_Array_Type *at, int *indices,
- VOID_STAR new_data, unsigned int sizeof_type, int is_ptr)
-{
- VOID_STAR at_data;
-
- /* Since 1 element is being transferred, there is not need to coerse
- * the array to linear.
- */
- if (NULL == (at_data = get_data_addr (at, indices)))
- return -1;
-
- return transfer_n_elements (at, new_data, at_data, sizeof_type, 1, is_ptr);
-}
-
-/* Here the ind_at index-array is a 1-d array of indices. This function
- * creates a 1-d array of made up of values of 'at' at the locations
- * specified by the indices. The result is pushed.
- */
-static int
-aget_from_index_array (SLang_Array_Type *at,
- SLang_Array_Type *ind_at)
-{
- SLang_Array_Type *new_at;
- int *indices, *indices_max;
- unsigned char *new_data, *src_data;
- unsigned int sizeof_type;
- int is_ptr;
-
- if (-1 == coerse_array_to_linear (at))
- return -1;
-
- if (-1 == coerse_array_to_linear (ind_at))
- return -1;
-
- if (-1 == check_index_array_ranges (at, ind_at))
- return -1;
-
- if (NULL == (new_at = SLang_create_array (at->data_type, 0, NULL, ind_at->dims, 1)))
- return -1;
-
- /* Since the index array is linear, I can address it directly */
- indices = (int *) ind_at->data;
- indices_max = indices + ind_at->num_elements;
-
- src_data = (unsigned char *) at->data;
- new_data = (unsigned char *) new_at->data;
- sizeof_type = new_at->sizeof_type;
- is_ptr = (new_at->flags & SLARR_DATA_VALUE_IS_POINTER);
-
- while (indices < indices_max)
- {
- unsigned int offset;
-
- offset = sizeof_type * (unsigned int)*indices;
- if (-1 == transfer_n_elements (at, (VOID_STAR) new_data,
- (VOID_STAR) (src_data + offset),
- sizeof_type, 1, is_ptr))
- {
- SLang_free_array (new_at);
- return -1;
- }
-
- new_data += sizeof_type;
- indices++;
- }
-
- return SLang_push_array (new_at, 1);
-}
-
-/* This is extremely ugly. It is due to the fact that the index_objects
- * may contain ranges. This is a utility function for the aget/aput
- * routines
- */
-static int
-convert_nasty_index_objs (SLang_Array_Type *at,
- SLang_Object_Type *index_objs,
- unsigned int num_indices,
- int **index_data,
- int *range_buf, int *range_delta_buf,
- int *max_dims,
- unsigned int *num_elements,
- int *is_array, int is_dim_array[SLARRAY_MAX_DIMS])
-{
- unsigned int i, total_num_elements;
- SLang_Array_Type *ind_at;
-
- if (num_indices != at->num_dims)
- {
- SLang_verror (SL_INVALID_PARM, "Array requires %u indices", at->num_dims);
- return -1;
- }
-
- *is_array = 0;
- total_num_elements = 1;
- for (i = 0; i < num_indices; i++)
- {
- int max_index, min_index;
- SLang_Object_Type *obj;
- int at_dims_i;
-
- at_dims_i = at->dims[i];
- obj = index_objs + i;
- range_delta_buf [i] = 0;
-
- if (obj->data_type == SLANG_INT_TYPE)
- {
- range_buf [i] = min_index = max_index = obj->v.int_val;
- max_dims [i] = 1;
- index_data[i] = range_buf + i;
- is_dim_array[i] = 0;
- }
- else
- {
- *is_array = 1;
- is_dim_array[i] = 1;
- ind_at = obj->v.array_val;
-
- if (ind_at->flags & SLARR_DATA_VALUE_IS_RANGE)
- {
- SLarray_Range_Array_Type *r;
- int delta;
- int first_index, last_index;
-
- r = (SLarray_Range_Array_Type *) ind_at->data;
-
- /* In an array indexing context, range arrays have different
- * semantics. Consider a[[0:10]]. Clearly this means elements
- * 0-10 of a. But what does a[[0:-1]] mean? By itself,
- * [0:-1] is a null matrix []. But, it is useful in an
- * indexing context to allow -1 to refer to the last element
- * of the array. Similarly, [-3:-1] refers to the last 3
- * elements.
- *
- * However, [-1:-3] does not refer to any of the elements.
- */
- if ((first_index = r->first_index) < 0)
- {
- if (at_dims_i != 0)
- first_index = (at_dims_i + first_index) % at_dims_i;
- }
-
- if ((last_index = r->last_index) < 0)
- {
- if (at_dims_i != 0)
- last_index = (at_dims_i + last_index) % at_dims_i;
- }
-
- delta = r->delta;
-
- range_delta_buf [i] = delta;
- range_buf[i] = first_index;
-
- if (delta > 0)
- {
- if (first_index > last_index)
- max_dims[i] = min_index = max_index = 0;
- else
- {
- max_index = min_index = first_index;
- while (max_index + delta <= last_index)
- max_index += delta;
- max_dims [i] = 1 + (max_index - min_index) / delta;
- }
- }
- else
- {
- if (first_index < last_index)
- max_dims[i] = min_index = max_index = 0;
- else
- {
- min_index = max_index = first_index;
- while (min_index + delta >= last_index)
- min_index += delta;
- max_dims [i] = 1 + (max_index - min_index) / (-delta);
- }
- }
- }
- else
- {
- int *tmp, *tmp_max;
-
- if (0 == (max_dims[i] = ind_at->num_elements))
- {
- total_num_elements = 0;
- break;
- }
-
- tmp = (int *) ind_at->data;
- tmp_max = tmp + ind_at->num_elements;
- index_data [i] = tmp;
-
- min_index = max_index = *tmp;
- while (tmp < tmp_max)
- {
- if (max_index > *tmp)
- max_index = *tmp;
- if (min_index < *tmp)
- min_index = *tmp;
-
- tmp++;
- }
- }
- }
-
- if ((at_dims_i == 0) && (max_dims[i] == 0))
- {
- total_num_elements = 0;
- continue;
- }
-
- if (max_index < 0)
- max_index += at_dims_i;
- if (min_index < 0)
- min_index += at_dims_i;
-
- if ((min_index < 0) || (min_index >= at_dims_i)
- || (max_index < 0) || (max_index >= at_dims_i))
- {
- SLang_verror (SL_INVALID_PARM, "Array index %u ([%d:%d]) out of allowed range [0->%d]",
- i, min_index, max_index, at_dims_i);
- return -1;
- }
-
- total_num_elements = total_num_elements * max_dims[i];
- }
-
- *num_elements = total_num_elements;
- return 0;
-}
-
-/* This routine pushes a 1-d vector of values from 'at' indexed by
- * the objects 'index_objs'. These objects can either be integers or
- * 1-d integer arrays. The fact that the 1-d arrays can be ranges
- * makes this look ugly.
- */
-static int
-aget_from_indices (SLang_Array_Type *at,
- SLang_Object_Type *index_objs, unsigned int num_indices)
-{
- int *index_data [SLARRAY_MAX_DIMS];
- int range_buf [SLARRAY_MAX_DIMS];
- int range_delta_buf [SLARRAY_MAX_DIMS];
- int max_dims [SLARRAY_MAX_DIMS];
- unsigned int i, num_elements;
- SLang_Array_Type *new_at;
- int map_indices[SLARRAY_MAX_DIMS];
- int indices [SLARRAY_MAX_DIMS];
- unsigned int sizeof_type;
- int is_ptr, ret, is_array;
- char *new_data;
- SLang_Class_Type *cl;
- int is_dim_array[SLARRAY_MAX_DIMS];
-
- if (-1 == convert_nasty_index_objs (at, index_objs, num_indices,
- index_data, range_buf, range_delta_buf,
- max_dims, &num_elements, &is_array,
- is_dim_array))
- return -1;
-
- is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
- sizeof_type = at->sizeof_type;
-
- cl = _SLclass_get_class (at->data_type);
-
- if ((is_array == 0) && (num_elements == 1))
- {
- new_data = (char *)cl->cl_transfer_buf;
- memset (new_data, 0, sizeof_type);
- new_at = NULL;
- }
- else
- {
- int i_num_elements = (int)num_elements;
-
- new_at = SLang_create_array (at->data_type, 0, NULL, &i_num_elements, 1);
- if (NULL == new_at)
- return -1;
- if (num_elements == 0)
- return SLang_push_array (new_at, 1);
-
- new_data = (char *)new_at->data;
- }
-
- SLMEMSET((char *) map_indices, 0, sizeof(map_indices));
- do
- {
- for (i = 0; i < num_indices; i++)
- {
- int j;
-
- j = map_indices[i];
-
- if (0 != range_delta_buf[i])
- indices[i] = range_buf[i] + j * range_delta_buf[i];
- else
- indices[i] = index_data [i][j];
- }
-
- if (-1 == _SLarray_aget_transfer_elem (at, indices, (VOID_STAR)new_data, sizeof_type, is_ptr))
- {
- SLang_free_array (new_at);
- return -1;
- }
- new_data += sizeof_type;
- }
- while (0 == next_index (map_indices, max_dims, num_indices));
-
- if (new_at != NULL)
- {
- int num_dims = 0;
- /* Fixup dimensions on array */
- for (i = 0; i < num_indices; i++)
- {
- if (is_dim_array[i]) /* was: (max_dims[i] > 1) */
- {
- new_at->dims[num_dims] = max_dims[i];
- num_dims++;
- }
- }
-
- if (num_dims != 0) new_at->num_dims = num_dims;
- return SLang_push_array (new_at, 1);
- }
-
- /* Here new_data is a whole new copy, so free it after the push */
- new_data -= sizeof_type;
- if (is_ptr && (*(VOID_STAR *)new_data == NULL))
- ret = SLang_push_null ();
- else
- {
- ret = (*cl->cl_apush) (at->data_type, (VOID_STAR)new_data);
- (*cl->cl_adestroy) (at->data_type, (VOID_STAR)new_data);
- }
-
- return ret;
-}
-
-static int push_string_as_array (unsigned char *s, unsigned int len)
-{
- int ilen;
- SLang_Array_Type *at;
-
- ilen = (int) len;
-
- at = SLang_create_array (SLANG_UCHAR_TYPE, 0, NULL, &ilen, 1);
- if (at == NULL)
- return -1;
-
- memcpy ((char *)at->data, (char *)s, len);
- return SLang_push_array (at, 1);
-}
-
-static int pop_array_as_string (char **sp)
-{
- SLang_Array_Type *at;
- int ret;
-
- *sp = NULL;
-
- if (-1 == SLang_pop_array_of_type (&at, SLANG_UCHAR_TYPE))
- return -1;
-
- ret = 0;
-
- if (NULL == (*sp = SLang_create_nslstring ((char *) at->data, at->num_elements)))
- ret = -1;
-
- SLang_free_array (at);
- return ret;
-}
-
-static int pop_array_as_bstring (SLang_BString_Type **bs)
-{
- SLang_Array_Type *at;
- int ret;
-
- *bs = NULL;
-
- if (-1 == SLang_pop_array_of_type (&at, SLANG_UCHAR_TYPE))
- return -1;
-
- ret = 0;
-
- if (NULL == (*bs = SLbstring_create ((unsigned char *) at->data, at->num_elements)))
- ret = -1;
-
- SLang_free_array (at);
- return ret;
-}
-
-static int aget_from_array (unsigned int num_indices)
-{
- SLang_Array_Type *at;
- SLang_Object_Type index_objs [SLARRAY_MAX_DIMS];
- int ret;
- int is_index_array;
- unsigned int i;
-
- if (num_indices > SLARRAY_MAX_DIMS)
- {
- SLang_verror (SL_INVALID_PARM, "Number of dims must be less than %d", SLARRAY_MAX_DIMS);
- return -1;
- }
-
- if (-1 == pop_array (&at, 1))
- return -1;
-
- if (-1 == pop_indices (index_objs, num_indices, &is_index_array))
- {
- SLang_free_array (at);
- return -1;
- }
-
- if (is_index_array == 0)
- ret = aget_from_indices (at, index_objs, num_indices);
- else
- ret = aget_from_index_array (at, index_objs[0].v.array_val);
-
- SLang_free_array (at);
- for (i = 0; i < num_indices; i++)
- SLang_free_object (index_objs + i);
-
- return ret;
-}
-
-static int push_string_element (unsigned char type, unsigned char *s, unsigned int len)
-{
- int i;
-
- if (SLang_peek_at_stack () == SLANG_ARRAY_TYPE)
- {
- char *str;
-
- /* The indices are array values. So, do this: */
- if (-1 == push_string_as_array (s, len))
- return -1;
-
- if (-1 == aget_from_array (1))
- return -1;
-
- if (type == SLANG_BSTRING_TYPE)
- {
- SLang_BString_Type *bs;
- int ret;
-
- if (-1 == pop_array_as_bstring (&bs))
- return -1;
-
- ret = SLang_push_bstring (bs);
- SLbstring_free (bs);
- return ret;
- }
-
- if (-1 == pop_array_as_string (&str))
- return -1;
- return _SLang_push_slstring (str); /* frees s upon error */
- }
-
- if (-1 == SLang_pop_integer (&i))
- return -1;
-
- if (i < 0) i = i + (int)len;
- if ((unsigned int) i > len)
- i = len; /* get \0 character --- bstrings include it as well */
-
- i = s[(unsigned int) i];
-
- return SLang_push_integer (i);
-}
-
-/* ARRAY[i, j, k] generates code: __args i j ...k ARRAY __aput/__aget
- * Here i, j, ... k may be a mixture of integers and 1-d arrays, or
- * a single 2-d array of indices. The 2-d index array is generated by the
- * 'where' function.
- *
- * If ARRAY is of type DataType, then this function will create an array of
- * the appropriate type. In that case, the indices i, j, ..., k must be
- * integers.
- */
-int _SLarray_aget (void)
-{
- unsigned int num_indices;
- int type;
- int (*aget_fun) (unsigned char, unsigned int);
-
- num_indices = (SLang_Num_Function_Args - 1);
-
- type = SLang_peek_at_stack ();
- switch (type)
- {
- case -1:
- return -1; /* stack underflow */
-
- case SLANG_DATATYPE_TYPE:
- return push_create_new_array ();
-
- case SLANG_BSTRING_TYPE:
- if (1 == num_indices)
- {
- SLang_BString_Type *bs;
- int ret;
- unsigned int len;
- unsigned char *s;
-
- if (-1 == SLang_pop_bstring (&bs))
- return -1;
-
- if (NULL == (s = SLbstring_get_pointer (bs, &len)))
- ret = -1;
- else
- ret = push_string_element (type, s, len);
-
- SLbstring_free (bs);
- return ret;
- }
- break;
-
- case SLANG_STRING_TYPE:
- if (1 == num_indices)
- {
- char *s;
- int ret;
-
- if (-1 == SLang_pop_slstring (&s))
- return -1;
-
- ret = push_string_element (type, (unsigned char *)s, strlen (s));
- SLang_free_slstring (s);
- return ret;
- }
- break;
-
- case SLANG_ARRAY_TYPE:
- break;
-
- default:
- aget_fun = _SLclass_get_class (type)->cl_aget;
- if (NULL != aget_fun)
- return (*aget_fun) (type, num_indices);
- }
-
- return aget_from_array (num_indices);
-}
-
-int
-_SLarray_aput_transfer_elem (SLang_Array_Type *at, int *indices,
- VOID_STAR data_to_put, unsigned int sizeof_type, int is_ptr)
-{
- VOID_STAR at_data;
-
- /* Since 1 element is being transferred, there is no need to coerse
- * the array to linear.
- */
- if (NULL == (at_data = get_data_addr (at, indices)))
- return -1;
-
- return transfer_n_elements (at, at_data, data_to_put, sizeof_type, 1, is_ptr);
-}
-
-static int
-aput_get_array_to_put (SLang_Class_Type *cl, unsigned int num_elements, int allow_array,
- SLang_Array_Type **at_ptr, char **data_to_put, unsigned int *data_increment)
-{
- unsigned char data_type;
- SLang_Array_Type *at;
-
- *at_ptr = NULL;
-
- data_type = cl->cl_data_type;
- if (-1 == SLclass_typecast (data_type, 1, allow_array))
- return -1;
-
- if ((data_type != SLANG_ARRAY_TYPE)
- && (data_type != SLANG_ANY_TYPE)
- && (SLANG_ARRAY_TYPE == SLang_peek_at_stack ()))
- {
- if (-1 == SLang_pop_array (&at, 0))
- return -1;
-
- if ((at->num_elements != num_elements)
-#if 0
- || (at->num_dims != 1)
-#endif
- )
- {
- SLang_verror (SL_TYPE_MISMATCH, "Array size is inappropriate for use with index-array");
- SLang_free_array (at);
- return -1;
- }
-
- *data_to_put = (char *) at->data;
- *data_increment = at->sizeof_type;
- *at_ptr = at;
- return 0;
- }
-
- *data_increment = 0;
- *data_to_put = (char *) cl->cl_transfer_buf;
-
- if (-1 == (*cl->cl_apop)(data_type, (VOID_STAR) *data_to_put))
- return -1;
-
- return 0;
-}
-
-static int
-aput_from_indices (SLang_Array_Type *at,
- SLang_Object_Type *index_objs, unsigned int num_indices)
-{
- int *index_data [SLARRAY_MAX_DIMS];
- int range_buf [SLARRAY_MAX_DIMS];
- int range_delta_buf [SLARRAY_MAX_DIMS];
- int max_dims [SLARRAY_MAX_DIMS];
- unsigned int i, num_elements;
- SLang_Array_Type *bt;
- int map_indices[SLARRAY_MAX_DIMS];
- int indices [SLARRAY_MAX_DIMS];
- unsigned int sizeof_type;
- int is_ptr, is_array, ret;
- char *data_to_put;
- unsigned int data_increment;
- SLang_Class_Type *cl;
- int is_dim_array [SLARRAY_MAX_DIMS];
-
- if (-1 == convert_nasty_index_objs (at, index_objs, num_indices,
- index_data, range_buf, range_delta_buf,
- max_dims, &num_elements, &is_array,
- is_dim_array))
- return -1;
-
- cl = at->cl;
-
- if (-1 == aput_get_array_to_put (cl, num_elements, is_array,
- &bt, &data_to_put, &data_increment))
- return -1;
-
- sizeof_type = at->sizeof_type;
- is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-
- ret = -1;
-
- SLMEMSET((char *) map_indices, 0, sizeof(map_indices));
- if (num_elements) do
- {
- for (i = 0; i < num_indices; i++)
- {
- int j;
-
- j = map_indices[i];
-
- if (0 != range_delta_buf[i])
- indices[i] = range_buf[i] + j * range_delta_buf[i];
- else
- indices[i] = index_data [i][j];
- }
-
- if (-1 == _SLarray_aput_transfer_elem (at, indices, (VOID_STAR)data_to_put, sizeof_type, is_ptr))
- goto return_error;
-
- data_to_put += data_increment;
- }
- while (0 == next_index (map_indices, max_dims, num_indices));
-
- ret = 0;
-
- /* drop */
-
- return_error:
- if (bt == NULL)
- {
- if (is_ptr)
- (*cl->cl_destroy) (cl->cl_data_type, (VOID_STAR) data_to_put);
- }
- else SLang_free_array (bt);
-
- return ret;
-}
-
-static int
-aput_from_index_array (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
- int *indices, *indices_max;
- unsigned int sizeof_type;
- char *data_to_put, *dest_data;
- unsigned int data_increment;
- int is_ptr;
- SLang_Array_Type *bt;
- SLang_Class_Type *cl;
- int ret;
-
- if (-1 == coerse_array_to_linear (at))
- return -1;
-
- if (-1 == coerse_array_to_linear (ind_at))
- return -1;
-
- if (-1 == check_index_array_ranges (at, ind_at))
- return -1;
-
- sizeof_type = at->sizeof_type;
-
- cl = at->cl;
-
- /* Note that if bt is returned as non NULL, then the array is a linear
- * one.
- */
- if (-1 == aput_get_array_to_put (cl, ind_at->num_elements, 1,
- &bt, &data_to_put, &data_increment))
- return -1;
-
- /* Since the index array is linear, I can address it directly */
- indices = (int *) ind_at->data;
- indices_max = indices + ind_at->num_elements;
-
- is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
- dest_data = (char *) at->data;
-
- ret = -1;
- while (indices < indices_max)
- {
- unsigned int offset;
-
- offset = sizeof_type * (unsigned int)*indices;
-
- if (-1 == transfer_n_elements (at, (VOID_STAR) (dest_data + offset),
- (VOID_STAR) data_to_put, sizeof_type, 1,
- is_ptr))
- goto return_error;
-
- indices++;
- data_to_put += data_increment;
- }
-
- ret = 0;
- /* Drop */
-
- return_error:
-
- if (bt == NULL)
- {
- if (is_ptr)
- (*cl->cl_destroy) (cl->cl_data_type, (VOID_STAR)data_to_put);
- }
- else SLang_free_array (bt);
-
- return ret;
-}
-
-/* ARRAY[i, j, k] = generates code: __args i j k ARRAY __aput
- */
-int _SLarray_aput (void)
-{
- unsigned int num_indices;
- SLang_Array_Type *at;
- SLang_Object_Type index_objs [SLARRAY_MAX_DIMS];
- int ret;
- int is_index_array;
- int (*aput_fun) (unsigned char, unsigned int);
- int type;
-
- ret = -1;
- num_indices = (SLang_Num_Function_Args - 1);
-
- type = SLang_peek_at_stack ();
- switch (type)
- {
- case -1:
- return -1;
-
- case SLANG_ARRAY_TYPE:
- break;
-
- default:
- if (NULL != (aput_fun = _SLclass_get_class (type)->cl_aput))
- return (*aput_fun) (type, num_indices);
- break;
- }
-
- if (-1 == SLang_pop_array (&at, 0))
- return -1;
-
- if (at->flags & SLARR_DATA_VALUE_IS_READ_ONLY)
- {
- SLang_verror (SL_READONLY_ERROR, "%s Array is read-only",
- SLclass_get_datatype_name (at->data_type));
- SLang_free_array (at);
- return -1;
- }
-
- if (-1 == pop_indices (index_objs, num_indices, &is_index_array))
- {
- SLang_free_array (at);
- return -1;
- }
-
- if (is_index_array == 0)
- ret = aput_from_indices (at, index_objs, num_indices);
- else
- ret = aput_from_index_array (at, index_objs[0].v.array_val);
-
- SLang_free_array (at);
- free_index_objects (index_objs, num_indices);
- return ret;
-}
-
-/* This is for 1-d matrices only. It is used by the sort function */
-static int push_element_at_index (SLang_Array_Type *at, int indx)
-{
- VOID_STAR data;
-
- if (NULL == (data = get_data_addr (at, &indx)))
- return -1;
-
- return push_element_at_addr (at, (VOID_STAR) data, 1);
-}
-
-static SLang_Name_Type *Sort_Function;
-static SLang_Array_Type *Sort_Array;
-
-static int sort_cmp_fun (int *a, int *b)
-{
- int cmp;
-
- if (SLang_Error
- || (-1 == push_element_at_index (Sort_Array, *a))
- || (-1 == push_element_at_index (Sort_Array, *b))
- || (-1 == SLexecute_function (Sort_Function))
- || (-1 == SLang_pop_integer (&cmp)))
- {
- /* DO not allow qsort to loop forever. Return something meaningful */
- if (*a > *b) return 1;
- if (*a < *b) return -1;
- return 0;
- }
-
- return cmp;
-}
-
-static int builtin_sort_cmp_fun (int *a, int *b)
-{
- VOID_STAR a_data;
- VOID_STAR b_data;
- SLang_Class_Type *cl;
-
- cl = Sort_Array->cl;
-
- if ((SLang_Error == 0)
- && (NULL != (a_data = get_data_addr (Sort_Array, a)))
- && (NULL != (b_data = get_data_addr (Sort_Array, b))))
- {
- int cmp;
-
- if ((Sort_Array->flags & SLARR_DATA_VALUE_IS_POINTER)
- && ((*(VOID_STAR *) a_data == NULL) || (*(VOID_STAR *) a_data == NULL)))
- {
- SLang_verror (SL_VARIABLE_UNINITIALIZED,
- "%s array has unitialized element", cl->cl_name);
- }
- else if (0 == (*cl->cl_cmp)(Sort_Array->data_type, a_data, b_data, &cmp))
- return cmp;
- }
-
-
- if (*a > *b) return 1;
- if (*a == *b) return 0;
- return -1;
-}
-
-static void sort_array_internal (SLang_Array_Type *at_str,
- SLang_Name_Type *entry,
- int (*sort_fun)(int *, int *))
-{
- SLang_Array_Type *ind_at;
- /* This is a silly hack to make up for braindead compilers and the lack of
- * uniformity in prototypes for qsort.
- */
- void (*qsort_fun) (char *, unsigned int, int, int (*)(int *, int *));
- int *indx;
- int i, n;
- int dims[1];
-
- if (Sort_Array != NULL)
- {
- SLang_verror (SL_NOT_IMPLEMENTED, "array_sort is not recursive");
- return;
- }
-
- n = at_str->num_elements;
-
- if (at_str->num_dims != 1)
- {
- SLang_verror (SL_INVALID_PARM, "sort is restricted to 1 dim arrays");
- return;
- }
-
- dims [0] = n;
-
- if (NULL == (ind_at = SLang_create_array (SLANG_INT_TYPE, 0, NULL, dims, 1)))
- return;
-
- indx = (int *) ind_at->data;
- for (i = 0; i < n; i++) indx[i] = i;
-
- if (n > 1)
- {
- qsort_fun = (void (*)(char *, unsigned int, int, int (*)(int *,
- int *)))
- qsort;
-
- Sort_Array = at_str;
- Sort_Function = entry;
- (*qsort_fun) ((char *) indx, n, sizeof (int), sort_fun);
- }
-
- Sort_Array = NULL;
- (void) SLang_push_array (ind_at, 1);
-}
-
-static void sort_array (void)
-{
- SLang_Name_Type *entry;
- SLang_Array_Type *at;
- int (*sort_fun) (int *, int *);
-
- if (SLang_Num_Function_Args != 1)
- {
- sort_fun = sort_cmp_fun;
-
- if (NULL == (entry = SLang_pop_function ()))
- return;
-
- if (-1 == SLang_pop_array (&at, 1))
- return;
- }
- else
- {
- sort_fun = builtin_sort_cmp_fun;
- if (-1 == SLang_pop_array (&at, 1))
- return;
- if (at->cl->cl_cmp == NULL)
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "%s does not have a predefined sorting method",
- at->cl->cl_name);
- SLang_free_array (at);
- return;
- }
- entry = NULL;
- }
-
- sort_array_internal (at, entry, sort_fun);
- SLang_free_array (at);
- SLang_free_function (entry);
-}
-
-static void bstring_to_array (SLang_BString_Type *bs)
-{
- unsigned char *s;
- unsigned int len;
-
- if (NULL == (s = SLbstring_get_pointer (bs, &len)))
- (void) SLang_push_null ();
- else
- (void) push_string_as_array (s, len);
-}
-
-static void array_to_bstring (SLang_Array_Type *at)
-{
- unsigned int nbytes;
- SLang_BString_Type *bs;
-
- nbytes = at->num_elements * at->sizeof_type;
- bs = SLbstring_create ((unsigned char *)at->data, nbytes);
- (void) SLang_push_bstring (bs);
- SLbstring_free (bs);
-}
-
-static void init_char_array (void)
-{
- SLang_Array_Type *at;
- char *s;
- unsigned int n, ndim;
-
- if (SLang_pop_slstring (&s)) return;
-
- if (-1 == SLang_pop_array (&at, 0))
- goto free_and_return;
-
- if (at->data_type != SLANG_CHAR_TYPE)
- {
- SLang_doerror("Operation requires character array");
- goto free_and_return;
- }
-
- n = strlen (s);
- ndim = at->num_elements;
- if (n > ndim)
- {
- SLang_doerror("String too big to init array");
- goto free_and_return;
- }
-
- strncpy((char *) at->data, s, ndim);
- /* drop */
-
- free_and_return:
- SLang_free_array (at);
- SLang_free_slstring (s);
-}
-
-static void array_info (void)
-{
- SLang_Array_Type *at, *bt;
- int num_dims;
-
- if (-1 == pop_array (&at, 1))
- return;
-
- num_dims = (int)at->num_dims;
-
- if (NULL != (bt = SLang_create_array (SLANG_INT_TYPE, 0, NULL, &num_dims, 1)))
- {
- int *bdata;
- int i;
- int *a_dims;
-
- a_dims = at->dims;
- bdata = (int *) bt->data;
- for (i = 0; i < num_dims; i++) bdata [i] = a_dims [i];
-
- if (0 == SLang_push_array (bt, 1))
- {
- (void) SLang_push_integer ((int) at->num_dims);
- (void) _SLang_push_datatype (at->data_type);
- }
- }
-
- SLang_free_array (at);
-}
-
-static VOID_STAR range_get_data_addr (SLang_Array_Type *at, int *dims)
-{
- static int value;
- SLarray_Range_Array_Type *r;
- int d;
-
- d = *dims;
- r = (SLarray_Range_Array_Type *)at->data;
-
- if (d < 0)
- d += at->dims[0];
-
- value = r->first_index + d * r->delta;
- return (VOID_STAR) &value;
-}
-
-static SLang_Array_Type *inline_implicit_int_array (int *xminptr, int *xmaxptr, int *dxptr)
-{
- int delta;
- SLang_Array_Type *at;
- int dims, idims;
- SLarray_Range_Array_Type *data;
-
- if (dxptr == NULL) delta = 1;
- else delta = *dxptr;
-
- if (delta == 0)
- {
- SLang_verror (SL_INVALID_PARM, "range-array increment must be non-zero");
- return NULL;
- }
-
- data = (SLarray_Range_Array_Type *) SLmalloc (sizeof (SLarray_Range_Array_Type));
- if (data == NULL)
- return NULL;
-
- SLMEMSET((char *) data, 0, sizeof (SLarray_Range_Array_Type));
- data->delta = delta;
- dims = 0;
-
- if (xminptr != NULL)
- data->first_index = *xminptr;
- else
- data->first_index = 0;
-
- if (xmaxptr != NULL)
- data->last_index = *xmaxptr;
- else
- data->last_index = -1;
-
-/* if ((xminptr != NULL) && (xmaxptr != NULL))
- { */
- idims = 1 + (data->last_index - data->first_index) / delta;
- if (idims > 0)
- dims = idims;
- /* } */
-
- if (NULL == (at = SLang_create_array (SLANG_INT_TYPE, 0, (VOID_STAR) data, &dims, 1)))
- return NULL;
-
- at->index_fun = range_get_data_addr;
- at->flags |= SLARR_DATA_VALUE_IS_RANGE;
-
- return at;
-}
-
-#if SLANG_HAS_FLOAT
-static SLang_Array_Type *inline_implicit_floating_array (unsigned char type,
- double *xminptr, double *xmaxptr, double *dxptr)
-{
- int n, i;
- SLang_Array_Type *at;
- int dims;
- double xmin, xmax, dx;
-
- if ((xminptr == NULL) || (xmaxptr == NULL))
- {
- SLang_verror (SL_INVALID_PARM, "range-array has unknown size");
- return NULL;
- }
- xmin = *xminptr;
- xmax = *xmaxptr;
- if (dxptr == NULL) dx = 1.0;
- else dx = *dxptr;
-
- if (dx == 0.0)
- {
- SLang_doerror ("range-array increment must be non-zero");
- return NULL;
- }
-
- /* I have convinced myself that it is better to use semi-open intervals
- * because of less ambiguities. So, [a:b:c] will represent the set of
- * values a, a + c, a + 2c ... a + nc
- * such that a + nc < b. That is, b lies outside the interval.
- */
-
- /* Allow for roundoff by adding 0.5 before truncation */
- n = (int)(1.5 + ((xmax - xmin) / dx));
- if (n <= 0)
- n = 0;
- else
- {
- double last = xmin + (n-1) * dx;
-
- if (dx > 0.0)
- {
- if (last >= xmax)
- n -= 1;
- }
- else if (last <= xmax)
- n -= 1;
- }
-
- dims = n;
- if (NULL == (at = SLang_create_array1 (type, 0, NULL, &dims, 1, 1)))
- return NULL;
-
- if (type == SLANG_DOUBLE_TYPE)
- {
- double *ptr;
-
- ptr = (double *) at->data;
-
- for (i = 0; i < n; i++)
- ptr[i] = xmin + i * dx;
- }
- else
- {
- float *ptr;
-
- ptr = (float *) at->data;
-
- for (i = 0; i < n; i++)
- ptr[i] = (float) (xmin + i * dx);
- }
- return at;
-}
-#endif
-
-/* FIXME: Priority=medium
- * This needs to be updated to work with all integer types.
- */
-int _SLarray_inline_implicit_array (void)
-{
- int int_vals[3];
-#if SLANG_HAS_FLOAT
- double double_vals[3];
-#endif
- int has_vals[3];
- unsigned int i, count;
- SLang_Array_Type *at;
- int precedence;
- unsigned char type;
- int is_int;
-
- count = SLang_Num_Function_Args;
-
- if (count == 2)
- has_vals [2] = 0;
- else if (count != 3)
- {
- SLang_doerror ("wrong number of arguments to __implicit_inline_array");
- return -1;
- }
-
-#if SLANG_HAS_FLOAT
- is_int = 1;
-#endif
-
- type = 0;
- precedence = 0;
-
- i = count;
- while (i--)
- {
- int this_type, this_precedence;
-
- if (-1 == (this_type = SLang_peek_at_stack ()))
- return -1;
-
- this_precedence = _SLarith_get_precedence ((unsigned char) this_type);
- if (precedence < this_precedence)
- {
- type = (unsigned char) this_type;
- precedence = this_precedence;
- }
-
- has_vals [i] = 1;
-
- switch (this_type)
- {
- case SLANG_NULL_TYPE:
- has_vals[i] = 0;
- (void) SLdo_pop ();
- break;
-
-#if SLANG_HAS_FLOAT
- case SLANG_DOUBLE_TYPE:
- case SLANG_FLOAT_TYPE:
- if (-1 == SLang_pop_double (double_vals + i, NULL, NULL))
- return -1;
- is_int = 0;
- break;
-#endif
- default:
- if (-1 == SLang_pop_integer (int_vals + i))
- return -1;
- double_vals[i] = (double) int_vals[i];
- }
- }
-
-#if SLANG_HAS_FLOAT
- if (is_int == 0)
- at = inline_implicit_floating_array (type,
- (has_vals[0] ? &double_vals[0] : NULL),
- (has_vals[1] ? &double_vals[1] : NULL),
- (has_vals[2] ? &double_vals[2] : NULL));
- else
-#endif
- at = inline_implicit_int_array ((has_vals[0] ? &int_vals[0] : NULL),
- (has_vals[1] ? &int_vals[1] : NULL),
- (has_vals[2] ? &int_vals[2] : NULL));
-
- if (at == NULL)
- return -1;
-
- return SLang_push_array (at, 1);
-}
-
-int _SLarray_wildcard_array (void)
-{
- SLang_Array_Type *at;
-
- if (NULL == (at = inline_implicit_int_array (NULL, NULL, NULL)))
- return -1;
-
- return SLang_push_array (at, 1);
-}
-
-static SLang_Array_Type *concat_arrays (unsigned int count)
-{
- SLang_Array_Type **arrays;
- SLang_Array_Type *at, *bt;
- unsigned int i;
- int num_elements;
- unsigned char type;
- char *src_data, *dest_data;
- int is_ptr;
- unsigned int sizeof_type;
- int max_dims, min_dims, max_rows, min_rows;
-
- arrays = (SLang_Array_Type **)SLmalloc (count * sizeof (SLang_Array_Type *));
- if (arrays == NULL)
- {
- SLdo_pop_n (count);
- return NULL;
- }
- SLMEMSET((char *) arrays, 0, count * sizeof(SLang_Array_Type *));
-
- at = NULL;
-
- num_elements = 0;
- i = count;
-
- while (i != 0)
- {
- i--;
-
- if (-1 == SLang_pop_array (&bt, 1))
- goto free_and_return;
-
- arrays[i] = bt;
- num_elements += (int)bt->num_elements;
- }
-
- type = arrays[0]->data_type;
- max_dims = min_dims = arrays[0]->num_dims;
- min_rows = max_rows = arrays[0]->dims[0];
-
- for (i = 1; i < count; i++)
- {
- SLang_Array_Type *ct;
- int num;
-
- bt = arrays[i];
-
- num = bt->num_dims;
- if (num > max_dims) max_dims = num;
- if (num < min_dims) min_dims = num;
-
- num = bt->dims[0];
- if (num > max_rows) max_rows = num;
- if (num < min_rows) min_rows = num;
-
- if (type == bt->data_type)
- continue;
-
- if (1 != _SLarray_typecast (bt->data_type, (VOID_STAR) &bt, 1,
- type, (VOID_STAR) &ct, 1))
- goto free_and_return;
-
- SLang_free_array (bt);
- arrays [i] = ct;
- }
-
- if (NULL == (at = SLang_create_array (type, 0, NULL, &num_elements, 1)))
- goto free_and_return;
-
- is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
- sizeof_type = at->sizeof_type;
- dest_data = (char *) at->data;
-
- for (i = 0; i < count; i++)
- {
- bt = arrays[i];
-
- src_data = (char *) bt->data;
- num_elements = bt->num_elements;
-
- if (-1 == transfer_n_elements (bt, (VOID_STAR)dest_data, (VOID_STAR)src_data, sizeof_type,
- num_elements, is_ptr))
- {
- SLang_free_array (at);
- at = NULL;
- goto free_and_return;
- }
-
- dest_data += num_elements * sizeof_type;
- }
-
- /* If the arrays are all 1-d, and all the same size, then reshape to a
- * 2-d array. This will allow us to do, e.g.
- * a = [[1,2], [3,4]]
- * to specifiy a 2-d.
- * Someday I will generalize this.
- */
- if ((max_dims == min_dims) && (max_dims == 1) && (min_rows == max_rows))
- {
- at->num_dims = 2;
- at->dims[0] = count;
- at->dims[1] = min_rows;
- }
-
- free_and_return:
-
- for (i = 0; i < count; i++)
- SLang_free_array (arrays[i]);
- SLfree ((char *) arrays);
-
- return at;
-}
-
-int _SLarray_inline_array (void)
-{
- SLang_Object_Type *obj;
- unsigned char type, this_type;
- unsigned int count;
- SLang_Array_Type *at;
-
- obj = _SLStack_Pointer;
-
- count = SLang_Num_Function_Args;
- type = 0;
-
- while ((count > 0) && (--obj >= _SLRun_Stack))
- {
- this_type = obj->data_type;
-
- if (type == 0)
- type = this_type;
-
- if ((type == this_type) || (type == SLANG_ARRAY_TYPE))
- {
- count--;
- continue;
- }
-
- switch (this_type)
- {
- case SLANG_ARRAY_TYPE:
- type = SLANG_ARRAY_TYPE;
- break;
-
- case SLANG_INT_TYPE:
- switch (type)
- {
-#if SLANG_HAS_FLOAT
- case SLANG_DOUBLE_TYPE:
- break;
-#endif
-#if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- break;
-#endif
- default:
- goto type_mismatch;
- }
- break;
-#if SLANG_HAS_FLOAT
- case SLANG_DOUBLE_TYPE:
- switch (type)
- {
- case SLANG_INT_TYPE:
- type = SLANG_DOUBLE_TYPE;
- break;
-# if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- break;
-# endif
- default:
- goto type_mismatch;
- }
- break;
-#endif
-#if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- switch (type)
- {
- case SLANG_INT_TYPE:
- case SLANG_DOUBLE_TYPE:
- type = SLANG_COMPLEX_TYPE;
- break;
-
- default:
- goto type_mismatch;
- }
- break;
-#endif
- default:
- type_mismatch:
- _SLclass_type_mismatch_error (type, this_type);
- return -1;
- }
- count--;
- }
-
- if (count != 0)
- {
- SLang_Error = SL_STACK_UNDERFLOW;
- return -1;
- }
-
- count = SLang_Num_Function_Args;
-
- if (count == 0)
- {
- SLang_verror (SL_NOT_IMPLEMENTED, "Empty inline-arrays not supported");
- return -1;
- }
-
- if (type == SLANG_ARRAY_TYPE)
- {
- if (NULL == (at = concat_arrays (count)))
- return -1;
- }
- else
- {
- SLang_Object_Type index_obj;
- int icount = (int) count;
-
- if (NULL == (at = SLang_create_array (type, 0, NULL, &icount, 1)))
- return -1;
-
- index_obj.data_type = SLANG_INT_TYPE;
- while (count != 0)
- {
- count--;
- index_obj.v.int_val = (int) count;
- if (-1 == aput_from_indices (at, &index_obj, 1))
- {
- SLang_free_array (at);
- SLdo_pop_n (count);
- return -1;
- }
- }
- }
-
- return SLang_push_array (at, 1);
-}
-
-static int array_binary_op_result (int op, unsigned char a, unsigned char b,
- unsigned char *c)
-{
- (void) op;
- (void) a;
- (void) b;
- *c = SLANG_ARRAY_TYPE;
- return 1;
-}
-
-static int array_binary_op (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- SLang_Array_Type *at, *bt, *ct;
- unsigned int i, num_dims;
- int (*binary_fun) (int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR);
- SLang_Class_Type *a_cl, *b_cl, *c_cl;
- int no_init;
-
- if (a_type == SLANG_ARRAY_TYPE)
- {
- if (na != 1)
- {
- SLang_verror (SL_NOT_IMPLEMENTED, "Binary operation on multiple arrays not implemented");
- return -1;
- }
-
- at = *(SLang_Array_Type **) ap;
- if (-1 == coerse_array_to_linear (at))
- return -1;
- ap = at->data;
- a_type = at->data_type;
- na = at->num_elements;
- }
- else
- {
- at = NULL;
- }
-
- if (b_type == SLANG_ARRAY_TYPE)
- {
- if (nb != 1)
- {
- SLang_verror (SL_NOT_IMPLEMENTED, "Binary operation on multiple arrays not implemented");
- return -1;
- }
-
- bt = *(SLang_Array_Type **) bp;
- if (-1 == coerse_array_to_linear (bt))
- return -1;
- bp = bt->data;
- b_type = bt->data_type;
- nb = bt->num_elements;
- }
- else
- {
- bt = NULL;
- }
-
- if ((at != NULL) && (bt != NULL))
- {
- num_dims = at->num_dims;
-
- if (num_dims != bt->num_dims)
- {
- SLang_verror (SL_TYPE_MISMATCH, "Arrays must have same dim for binary operation");
- return -1;
- }
-
- for (i = 0; i < num_dims; i++)
- {
- if (at->dims[i] != bt->dims[i])
- {
- SLang_verror (SL_TYPE_MISMATCH, "Arrays must be the same for binary operation");
- return -1;
- }
- }
- }
-
- a_cl = _SLclass_get_class (a_type);
- b_cl = _SLclass_get_class (b_type);
-
- if (NULL == (binary_fun = _SLclass_get_binary_fun (op, a_cl, b_cl, &c_cl, 1)))
- return -1;
-
- no_init = ((c_cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
- || (c_cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR));
-
- ct = NULL;
-#if _SLANG_USE_TMP_OPTIMIZATION
- /* If we are dealing with scalar (or vector) objects, and if the object
- * appears to be owned by the stack, then use it instead of creating a
- * new version. This can happen with code such as:
- * @ x = [1,2,3,4];
- * @ x = __tmp(x) + 1;
- */
- if (no_init)
- {
- if ((at != NULL)
- && (at->num_refs == 1)
- && (at->data_type == c_cl->cl_data_type))
- {
- ct = at;
- ct->num_refs = 2;
- }
- else if ((bt != NULL)
- && (bt->num_refs == 1)
- && (bt->data_type == c_cl->cl_data_type))
- {
- ct = bt;
- ct->num_refs = 2;
- }
- }
-#endif /* _SLANG_USE_TMP_OPTIMIZATION */
-
- if (ct == NULL)
- {
- if (at != NULL) ct = at; else ct = bt;
- ct = SLang_create_array1 (c_cl->cl_data_type, 0, NULL, ct->dims, ct->num_dims, no_init);
- if (ct == NULL)
- return -1;
- }
-
-
- if ((na == 0) || (nb == 0) /* allow empty arrays */
- || (1 == (*binary_fun) (op, a_type, ap, na, b_type, bp, nb, ct->data)))
- {
- *(SLang_Array_Type **) cp = ct;
- return 1;
- }
-
- SLang_free_array (ct);
- return -1;
-}
-
-static void array_where (void)
-{
- SLang_Array_Type *at, *bt;
- char *a_data;
- int *b_data;
- unsigned int i, num_elements;
- int b_num;
-
- if (-1 == SLang_pop_array (&at, 1))
- return;
-
- bt = NULL;
-
- if (at->data_type != SLANG_CHAR_TYPE)
- {
- int zero;
- SLang_Array_Type *tmp_at;
-
- tmp_at = at;
- zero = 0;
- if (1 != array_binary_op (SLANG_NE,
- SLANG_ARRAY_TYPE, (VOID_STAR) &at, 1,
- SLANG_CHAR_TYPE, (VOID_STAR) &zero, 1,
- (VOID_STAR) &tmp_at))
- goto return_error;
-
- SLang_free_array (at);
- at = tmp_at;
- if (at->data_type != SLANG_CHAR_TYPE)
- {
- SLang_Error = SL_TYPE_MISMATCH;
- goto return_error;
- }
- }
-
- a_data = (char *) at->data;
- num_elements = at->num_elements;
-
- b_num = 0;
- for (i = 0; i < num_elements; i++)
- if (a_data[i] != 0) b_num++;
-
- if (NULL == (bt = SLang_create_array1 (SLANG_INT_TYPE, 0, NULL, &b_num, 1, 1)))
- goto return_error;
-
- b_data = (int *) bt->data;
-
- i = 0;
- while (b_num)
- {
- if (a_data[i] != 0)
- {
- *b_data++ = i;
- b_num--;
- }
-
- i++;
- }
-
- (void) SLang_push_array (bt, 0);
- /* drop */
-
- return_error:
- SLang_free_array (at);
- SLang_free_array (bt);
-}
-
-static int do_array_reshape (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
- int *dims;
- unsigned int i, num_dims;
- unsigned int num_elements;
-
- if ((ind_at->data_type != SLANG_INT_TYPE)
- || (ind_at->num_dims != 1))
- {
- SLang_verror (SL_TYPE_MISMATCH, "Expecting 1-d integer array");
- return -1;
- }
-
- num_dims = ind_at->num_elements;
- dims = (int *) ind_at->data;
-
- num_elements = 1;
- for (i = 0; i < num_dims; i++)
- {
- int d = dims[i];
- if (d < 0)
- {
- SLang_verror (SL_INVALID_PARM, "reshape: dimension is less then 0");
- return -1;
- }
-
- num_elements = (unsigned int) d * num_elements;
- }
-
- if ((num_elements != at->num_elements)
- || (num_dims > SLARRAY_MAX_DIMS))
- {
- SLang_verror (SL_INVALID_PARM, "Unable to reshape array to specified size");
- return -1;
- }
-
- for (i = 0; i < num_dims; i++)
- at->dims [i] = dims[i];
-
- while (i < SLARRAY_MAX_DIMS)
- {
- at->dims [i] = 1;
- i++;
- }
-
- at->num_dims = num_dims;
- return 0;
-}
-
-static void array_reshape (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
- (void) do_array_reshape (at, ind_at);
-}
-
-static void _array_reshape (SLang_Array_Type *ind_at)
-{
- SLang_Array_Type *at;
- SLang_Array_Type *new_at;
-
- if (-1 == SLang_pop_array (&at, 1))
- return;
-
- /* FIXME: Priority=low: duplicate_array could me modified to look at num_refs */
-
- /* Now try to avoid the overhead of creating a new array if possible */
- if (at->num_refs == 1)
- {
- /* Great, we are the sole owner of this array. */
- if ((-1 == do_array_reshape (at, ind_at))
- || (-1 == SLclass_push_ptr_obj (SLANG_ARRAY_TYPE, (VOID_STAR)at)))
- SLang_free_array (at);
- return;
- }
-
- new_at = SLang_duplicate_array (at);
- if (new_at != NULL)
- {
- if (0 == do_array_reshape (new_at, ind_at))
- (void) SLang_push_array (new_at, 0);
-
- SLang_free_array (new_at);
- }
- SLang_free_array (at);
-}
-
-typedef struct
-{
- SLang_Array_Type *at;
- unsigned int increment;
- char *addr;
-}
-Map_Arg_Type;
-/* Usage: array_map (Return-Type, func, args,....); */
-static void array_map (void)
-{
- Map_Arg_Type *args;
- unsigned int num_args;
- unsigned int i, i_control;
- SLang_Name_Type *nt;
- unsigned int num_elements;
- SLang_Array_Type *at;
- char *addr;
- unsigned char type;
-
- at = NULL;
- args = NULL;
- nt = NULL;
-
- if (SLang_Num_Function_Args < 3)
- {
- SLang_verror (SL_INVALID_PARM,
- "Usage: array_map (Return-Type, &func, args...)");
- SLdo_pop_n (SLang_Num_Function_Args);
- return;
- }
-
- num_args = (unsigned int)SLang_Num_Function_Args - 2;
- args = (Map_Arg_Type *) SLmalloc (num_args * sizeof (Map_Arg_Type));
- if (args == NULL)
- {
- SLdo_pop_n (SLang_Num_Function_Args);
- return;
- }
- memset ((char *) args, 0, num_args * sizeof (Map_Arg_Type));
- i = num_args;
- i_control = 0;
- while (i > 0)
- {
- i--;
- if (-1 == SLang_pop_array (&args[i].at, 1))
- {
- SLdo_pop_n (i + 2);
- goto return_error;
- }
- if (args[i].at->num_elements > 1)
- i_control = i;
- }
-
- if (NULL == (nt = SLang_pop_function ()))
- {
- SLdo_pop_n (1);
- goto return_error;
- }
-
- num_elements = args[i_control].at->num_elements;
-
- if (-1 == _SLang_pop_datatype (&type))
- goto return_error;
-
- if (type == SLANG_UNDEFINED_TYPE) /* Void_Type */
- at = NULL;
- else
- {
- at = args[i_control].at;
-
- if (NULL == (at = SLang_create_array (type, 0, NULL, at->dims, at->num_dims)))
- goto return_error;
- }
-
-
- for (i = 0; i < num_args; i++)
- {
- SLang_Array_Type *ati = args[i].at;
- /* FIXME: Priority = low: The actual dimensions should be compared. */
- if (ati->num_elements == num_elements)
- args[i].increment = ati->sizeof_type;
- /* memset already guarantees increment to be zero */
-
- if (ati->num_elements == 0)
- {
- SLang_verror (0, "array_map: function argument %d of %d is an empty array",
- i+1, num_args);
- goto return_error;
- }
-
- args[i].addr = (char *) ati->data;
- }
-
- if (at == NULL)
- addr = NULL;
- else
- addr = (char *)at->data;
-
- for (i = 0; i < num_elements; i++)
- {
- unsigned int j;
-
- if (-1 == SLang_start_arg_list ())
- goto return_error;
-
- for (j = 0; j < num_args; j++)
- {
- if (-1 == push_element_at_addr (args[j].at,
- (VOID_STAR) args[j].addr,
- 1))
- {
- SLdo_pop_n (j);
- goto return_error;
- }
-
- args[j].addr += args[j].increment;
- }
-
- if (-1 == SLang_end_arg_list ())
- {
- SLdo_pop_n (num_args);
- goto return_error;
- }
-
- if (-1 == SLexecute_function (nt))
- goto return_error;
-
- if (at == NULL)
- continue;
-
- if (-1 == at->cl->cl_apop (type, (VOID_STAR) addr))
- goto return_error;
-
- addr += at->sizeof_type;
- }
-
- if (at != NULL)
- (void) SLang_push_array (at, 0);
-
- /* drop */
-
- return_error:
- SLang_free_array (at);
- SLang_free_function (nt);
- if (args != NULL)
- {
- for (i = 0; i < num_args; i++)
- SLang_free_array (args[i].at);
-
- SLfree ((char *) args);
- }
-}
-
-static SLang_Intrin_Fun_Type Array_Table [] =
-{
- MAKE_INTRINSIC_0("array_map", array_map, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("array_sort", sort_array, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_1("array_to_bstring", array_to_bstring, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
- MAKE_INTRINSIC_1("bstring_to_array", bstring_to_array, SLANG_VOID_TYPE, SLANG_BSTRING_TYPE),
- MAKE_INTRINSIC("init_char_array", init_char_array, SLANG_VOID_TYPE, 0),
- MAKE_INTRINSIC("array_info", array_info, SLANG_VOID_TYPE, 0),
- MAKE_INTRINSIC("where", array_where, SLANG_VOID_TYPE, 0),
- MAKE_INTRINSIC_2("reshape", array_reshape, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE, SLANG_ARRAY_TYPE),
- MAKE_INTRINSIC_1("_reshape", _array_reshape, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-static char *array_string (unsigned char type, VOID_STAR v)
-{
- SLang_Array_Type *at;
- char buf[512];
- unsigned int i, num_dims;
- int *dims;
-
- at = *(SLang_Array_Type **) v;
- type = at->data_type;
- num_dims = at->num_dims;
- dims = at->dims;
-
- sprintf (buf, "%s[%d", SLclass_get_datatype_name (type), at->dims[0]);
-
- for (i = 1; i < num_dims; i++)
- sprintf (buf + strlen(buf), ",%d", dims[i]);
- strcat (buf, "]");
-
- return SLmake_string (buf);
-}
-
-static void array_destroy (unsigned char type, VOID_STAR v)
-{
- (void) type;
- SLang_free_array (*(SLang_Array_Type **) v);
-}
-
-static int array_push (unsigned char type, VOID_STAR v)
-{
- SLang_Array_Type *at;
-
- (void) type;
- at = *(SLang_Array_Type **) v;
- return SLang_push_array (at, 0);
-}
-
-/* Intrinsic arrays are not stored in a variable. So, the address that
- * would contain the variable holds the array address.
- */
-static int array_push_intrinsic (unsigned char type, VOID_STAR v)
-{
- (void) type;
- return SLang_push_array ((SLang_Array_Type *) v, 0);
-}
-
-int _SLarray_add_bin_op (unsigned char type)
-{
- SL_OOBinary_Type *ab;
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
- ab = cl->cl_binary_ops;
-
- while (ab != NULL)
- {
- if (ab->data_type == SLANG_ARRAY_TYPE)
- return 0;
- ab = ab->next;
- }
-
- if ((-1 == SLclass_add_binary_op (SLANG_ARRAY_TYPE, type, array_binary_op, array_binary_op_result))
- || (-1 == SLclass_add_binary_op (type, SLANG_ARRAY_TYPE, array_binary_op, array_binary_op_result)))
- return -1;
-
- return 0;
-}
-
-static SLang_Array_Type *
-do_array_math_op (int op, int unary_type,
- SLang_Array_Type *at, unsigned int na)
-{
- unsigned char a_type, b_type;
- int (*f) (int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
- SLang_Array_Type *bt;
- SLang_Class_Type *b_cl;
- int no_init;
-
- if (na != 1)
- {
- SLang_verror (SL_NOT_IMPLEMENTED, "Operation restricted to 1 array");
- return NULL;
- }
-
- a_type = at->data_type;
- if (NULL == (f = _SLclass_get_unary_fun (op, at->cl, &b_cl, unary_type)))
- return NULL;
- b_type = b_cl->cl_data_type;
-
- if (-1 == coerse_array_to_linear (at))
- return NULL;
-
- no_init = ((b_cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
- || (b_cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR));
-
-#if _SLANG_USE_TMP_OPTIMIZATION
- /* If we are dealing with scalar (or vector) objects, and if the object
- * appears to be owned by the stack, then use it instead of creating a
- * new version. This can happen with code such as:
- * @ x = [1,2,3,4];
- * @ x = UNARY_OP(__tmp(x));
- */
- if (no_init
- && (at->num_refs == 1)
- && (at->data_type == b_cl->cl_data_type))
- {
- bt = at;
- bt->num_refs = 2;
- }
- else
-#endif /* _SLANG_USE_TMP_OPTIMIZATION */
- if (NULL == (bt = SLang_create_array1 (b_type, 0, NULL, at->dims, at->num_dims, no_init)))
- return NULL;
-
- if (1 != (*f)(op, a_type, at->data, at->num_elements, bt->data))
- {
- SLang_free_array (bt);
- return NULL;
- }
- return bt;
-}
-
-static int
-array_unary_op_result (int op, unsigned char a, unsigned char *b)
-{
- (void) op;
- (void) a;
- *b = SLANG_ARRAY_TYPE;
- return 1;
-}
-
-static int
-array_unary_op (int op,
- unsigned char a, VOID_STAR ap, unsigned int na,
- VOID_STAR bp)
-{
- SLang_Array_Type *at;
-
- (void) a;
- at = *(SLang_Array_Type **) ap;
- if (NULL == (at = do_array_math_op (op, _SLANG_BC_UNARY, at, na)))
- {
- if (SLang_Error) return -1;
- return 0;
- }
- *(SLang_Array_Type **) bp = at;
- return 1;
-}
-
-static int
-array_math_op (int op,
- unsigned char a, VOID_STAR ap, unsigned int na,
- VOID_STAR bp)
-{
- SLang_Array_Type *at;
-
- (void) a;
- at = *(SLang_Array_Type **) ap;
- if (NULL == (at = do_array_math_op (op, _SLANG_BC_MATH_UNARY, at, na)))
- {
- if (SLang_Error) return -1;
- return 0;
- }
- *(SLang_Array_Type **) bp = at;
- return 1;
-}
-
-static int
-array_app_op (int op,
- unsigned char a, VOID_STAR ap, unsigned int na,
- VOID_STAR bp)
-{
- SLang_Array_Type *at;
-
- (void) a;
- at = *(SLang_Array_Type **) ap;
- if (NULL == (at = do_array_math_op (op, _SLANG_BC_APP_UNARY, at, na)))
- {
- if (SLang_Error) return -1;
- return 0;
- }
- *(SLang_Array_Type **) bp = at;
- return 1;
-}
-
-int
-_SLarray_typecast (unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp,
- int is_implicit)
-{
- SLang_Array_Type *at, *bt;
- SLang_Class_Type *b_cl;
- int no_init;
- int (*t) (unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR);
-
- if (na != 1)
- {
- SLang_verror (SL_NOT_IMPLEMENTED, "typecast of multiple arrays not implemented");
- return -1;
- }
-
- at = *(SLang_Array_Type **) ap;
- a_type = at->data_type;
-
- if (a_type == b_type)
- {
- at->num_refs += 1;
- *(SLang_Array_Type **) bp = at;
- return 1;
- }
-
- if (NULL == (t = _SLclass_get_typecast (a_type, b_type, is_implicit)))
- return -1;
-
- if (-1 == coerse_array_to_linear (at))
- return -1;
-
- b_cl = _SLclass_get_class (b_type);
-
- no_init = ((b_cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
- || (b_cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR));
-
- if (NULL == (bt = SLang_create_array1 (b_type, 0, NULL, at->dims, at->num_dims, no_init)))
- return -1;
-
- if (1 == (*t) (a_type, at->data, at->num_elements, b_type, bt->data))
- {
- *(SLang_Array_Type **) bp = bt;
- return 1;
- }
-
- SLang_free_array (bt);
- return 0;
-}
-
-SLang_Array_Type *SLang_duplicate_array (SLang_Array_Type *at)
-{
- SLang_Array_Type *bt;
- char *data, *a_data;
- unsigned int i, num_elements, sizeof_type;
- unsigned int size;
- int (*cl_acopy) (unsigned char, VOID_STAR, VOID_STAR);
- unsigned char type;
-
- if (-1 == coerse_array_to_linear (at))
- return NULL;
-
- type = at->data_type;
- num_elements = at->num_elements;
- sizeof_type = at->sizeof_type;
- size = num_elements * sizeof_type;
-
- if (NULL == (data = SLmalloc (size)))
- return NULL;
-
- if (NULL == (bt = SLang_create_array (type, 0, (VOID_STAR)data, at->dims, at->num_dims)))
- {
- SLfree (data);
- return NULL;
- }
-
- a_data = (char *) at->data;
- if (0 == (at->flags & SLARR_DATA_VALUE_IS_POINTER))
- {
- SLMEMCPY (data, a_data, size);
- return bt;
- }
-
- SLMEMSET (data, 0, size);
-
- cl_acopy = at->cl->cl_acopy;
- for (i = 0; i < num_elements; i++)
- {
- if (NULL != *(VOID_STAR *) a_data)
- {
- if (-1 == (*cl_acopy) (type, (VOID_STAR) a_data, (VOID_STAR) data))
- {
- SLang_free_array (bt);
- return NULL;
- }
- }
-
- data += sizeof_type;
- a_data += sizeof_type;
- }
-
- return bt;
-}
-
-static int array_dereference (unsigned char type, VOID_STAR addr)
-{
- SLang_Array_Type *at;
-
- (void) type;
- at = SLang_duplicate_array (*(SLang_Array_Type **) addr);
- if (at == NULL) return -1;
- return SLang_push_array (at, 1);
-}
-
-/* This function gets called via, e.g., @Array_Type (Double_Type, [10,20]);
- */
-static int
-array_datatype_deref (unsigned char type)
-{
- SLang_Array_Type *ind_at;
- SLang_Array_Type *at;
-
-#if 0
- /* The parser generated code for this as if a function call were to be
- * made. However, the interpreter simply called the deref object routine
- * instead of the function call. So, I must simulate the function call.
- * This needs to be formalized to hide this detail from applications
- * who wish to do the same. So...
- * FIXME: Priority=medium
- */
- if (0 == _SL_increment_frame_pointer ())
- (void) _SL_decrement_frame_pointer ();
-#endif
-
- if (-1 == SLang_pop_array (&ind_at, 1))
- return -1;
-
- if ((ind_at->data_type != SLANG_INT_TYPE)
- || (ind_at->num_dims != 1))
- {
- SLang_verror (SL_TYPE_MISMATCH, "Expecting 1-d integer array");
- goto return_error;
- }
-
- if (-1 == _SLang_pop_datatype (&type))
- goto return_error;
-
- if (NULL == (at = SLang_create_array (type, 0, NULL,
- (int *) ind_at->data,
- ind_at->num_elements)))
- goto return_error;
-
- SLang_free_array (ind_at);
- return SLang_push_array (at, 1);
-
- return_error:
- SLang_free_array (ind_at);
- return -1;
-}
-
-static int array_length (unsigned char type, VOID_STAR v, unsigned int *len)
-{
- SLang_Array_Type *at;
-
- (void) type;
- at = *(SLang_Array_Type **) v;
- *len = at->num_elements;
- return 0;
-}
-
-int
-_SLarray_init_slarray (void)
-{
- SLang_Class_Type *cl;
-
- if (-1 == SLadd_intrin_fun_table (Array_Table, NULL))
- return -1;
-
- if (NULL == (cl = SLclass_allocate_class ("Array_Type")))
- return -1;
-
- (void) SLclass_set_string_function (cl, array_string);
- (void) SLclass_set_destroy_function (cl, array_destroy);
- (void) SLclass_set_push_function (cl, array_push);
- cl->cl_push_intrinsic = array_push_intrinsic;
- cl->cl_dereference = array_dereference;
- cl->cl_datatype_deref = array_datatype_deref;
- cl->cl_length = array_length;
-
- if (-1 == SLclass_register_class (cl, SLANG_ARRAY_TYPE, sizeof (VOID_STAR),
- SLANG_CLASS_TYPE_PTR))
- return -1;
-
- if ((-1 == SLclass_add_binary_op (SLANG_ARRAY_TYPE, SLANG_ARRAY_TYPE, array_binary_op, array_binary_op_result))
- || (-1 == SLclass_add_unary_op (SLANG_ARRAY_TYPE, array_unary_op, array_unary_op_result))
- || (-1 == SLclass_add_app_unary_op (SLANG_ARRAY_TYPE, array_app_op, array_unary_op_result))
- || (-1 == SLclass_add_math_op (SLANG_ARRAY_TYPE, array_math_op, array_unary_op_result))
- || (-1 == SLclass_add_math_op (SLANG_ARRAY_TYPE, array_math_op, array_unary_op_result)))
- return -1;
-
- return 0;
-}
-
-int SLang_pop_array (SLang_Array_Type **at_ptr, int convert_scalar)
-{
- if (-1 == pop_array (at_ptr, convert_scalar))
- return -1;
-
- if (-1 == coerse_array_to_linear (*at_ptr))
- {
- SLang_free_array (*at_ptr);
- return -1;
- }
- return 0;
-}
-
-int SLang_pop_array_of_type (SLang_Array_Type **at, unsigned char type)
-{
- if (-1 == SLclass_typecast (type, 1, 1))
- return -1;
-
- return SLang_pop_array (at, 1);
-}
-
-void (*_SLang_Matrix_Multiply)(void);
-
-int _SLarray_matrix_multiply (void)
-{
- if (_SLang_Matrix_Multiply != NULL)
- {
- (*_SLang_Matrix_Multiply)();
- return 0;
- }
- SLang_verror (SL_NOT_IMPLEMENTED, "Matrix multiplication not available");
- return -1;
-}
-
-struct _SLang_Foreach_Context_Type
-{
- SLang_Array_Type *at;
- unsigned int next_element_index;
-};
-
-SLang_Foreach_Context_Type *
-_SLarray_cl_foreach_open (unsigned char type, unsigned int num)
-{
- SLang_Foreach_Context_Type *c;
-
- if (num != 0)
- {
- SLdo_pop_n (num + 1);
- SLang_verror (SL_NOT_IMPLEMENTED,
- "%s does not support 'foreach using' form",
- SLclass_get_datatype_name (type));
- return NULL;
- }
-
- if (NULL == (c = (SLang_Foreach_Context_Type *) SLmalloc (sizeof (SLang_Foreach_Context_Type))))
- return NULL;
-
- memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
- if (-1 == pop_array (&c->at, 1))
- {
- SLfree ((char *) c);
- return NULL;
- }
-
- return c;
-}
-
-void _SLarray_cl_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- (void) type;
- if (c == NULL) return;
- SLang_free_array (c->at);
- SLfree ((char *) c);
-}
-
-int _SLarray_cl_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- SLang_Array_Type *at;
- VOID_STAR data;
-
- (void) type;
-
- if (c == NULL)
- return -1;
-
- at = c->at;
- if (at->num_elements == c->next_element_index)
- return 0;
-
- /* FIXME: Priority = low. The following assumes linear arrays
- * or Integer range arrays. Fixing it right requires a method to get the
- * nth element of a multidimensional array.
- */
-
- if (at->flags & SLARR_DATA_VALUE_IS_RANGE)
- {
- int d = (int) c->next_element_index;
- data = range_get_data_addr (at, &d);
- }
- else
- data = (VOID_STAR) ((char *)at->data + (c->next_element_index * at->sizeof_type));
-
- c->next_element_index += 1;
-
- if ((at->flags & SLARR_DATA_VALUE_IS_POINTER)
- && (*(VOID_STAR *) data == NULL))
- {
- if (-1 == SLang_push_null ())
- return -1;
- }
- else if (-1 == (*at->cl->cl_apush)(at->data_type, data))
- return -1;
-
- /* keep going */
- return 1;
-}
-
diff --git a/mdk-stage1/slang/slarrfun.c b/mdk-stage1/slang/slarrfun.c
deleted file mode 100644
index bfa6ec5e5..000000000
--- a/mdk-stage1/slang/slarrfun.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/* Advanced array manipulation routines for S-Lang */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static int next_transposed_index (int *dims, int *max_dims, unsigned int num_dims)
-{
- int i;
-
- for (i = 0; i < (int) num_dims; i++)
- {
- int dims_i;
-
- dims_i = dims [i] + 1;
- if (dims_i != (int) max_dims [i])
- {
- dims [i] = dims_i;
- return 0;
- }
- dims [i] = 0;
- }
-
- return -1;
-}
-
-static SLang_Array_Type *allocate_transposed_array (SLang_Array_Type *at)
-{
- unsigned int num_elements;
- SLang_Array_Type *bt;
- VOID_STAR b_data;
-
- num_elements = at->num_elements;
- b_data = (VOID_STAR) SLmalloc (at->sizeof_type * num_elements);
- if (b_data == NULL)
- return NULL;
-
- bt = SLang_create_array (at->data_type, 0, b_data, at->dims, 2);
- if (bt == NULL)
- {
- SLfree ((char *)b_data);
- return NULL;
- }
-
- bt->dims[1] = at->dims[0];
- bt->dims[0] = at->dims[1];
-
- return bt;
-}
-
-#define GENERIC_TYPE float
-#define TRANSPOSE_2D_ARRAY transpose_floats
-#define GENERIC_TYPE_A float
-#define GENERIC_TYPE_B float
-#define GENERIC_TYPE_C float
-#define INNERPROD_FUNCTION innerprod_float_float
-#if SLANG_HAS_COMPLEX
-# define INNERPROD_COMPLEX_A innerprod_complex_float
-# define INNERPROD_A_COMPLEX innerprod_float_complex
-#endif
-#include "slarrfun.inc"
-
-#define GENERIC_TYPE double
-#define TRANSPOSE_2D_ARRAY transpose_doubles
-#define GENERIC_TYPE_A double
-#define GENERIC_TYPE_B double
-#define GENERIC_TYPE_C double
-#define INNERPROD_FUNCTION innerprod_double_double
-#if SLANG_HAS_COMPLEX
-# define INNERPROD_COMPLEX_A innerprod_complex_double
-# define INNERPROD_A_COMPLEX innerprod_double_complex
-#endif
-#include "slarrfun.inc"
-
-#define GENERIC_TYPE_A double
-#define GENERIC_TYPE_B float
-#define GENERIC_TYPE_C double
-#define INNERPROD_FUNCTION innerprod_double_float
-#include "slarrfun.inc"
-
-#define GENERIC_TYPE_A float
-#define GENERIC_TYPE_B double
-#define GENERIC_TYPE_C double
-#define INNERPROD_FUNCTION innerprod_float_double
-#include "slarrfun.inc"
-
-/* Finally pick up the complex_complex multiplication
- * and do the integers
- */
-#if SLANG_HAS_COMPLEX
-# define INNERPROD_COMPLEX_COMPLEX innerprod_complex_complex
-#endif
-#define GENERIC_TYPE int
-#define TRANSPOSE_2D_ARRAY transpose_ints
-#include "slarrfun.inc"
-
-#if SIZEOF_LONG != SIZEOF_INT
-# define GENERIC_TYPE long
-# define TRANSPOSE_2D_ARRAY transpose_longs
-# include "slarrfun.inc"
-#else
-# define transpose_longs transpose_ints
-#endif
-
-#if SIZEOF_SHORT != SIZEOF_INT
-# define GENERIC_TYPE short
-# define TRANSPOSE_2D_ARRAY transpose_shorts
-# include "slarrfun.inc"
-#else
-# define transpose_shorts transpose_ints
-#endif
-
-#define GENERIC_TYPE char
-#define TRANSPOSE_2D_ARRAY transpose_chars
-#include "slarrfun.inc"
-
-/* This routine works only with linear arrays */
-static SLang_Array_Type *transpose (SLang_Array_Type *at)
-{
- int dims [SLARRAY_MAX_DIMS];
- int *max_dims;
- unsigned int num_dims;
- SLang_Array_Type *bt;
- int i;
- unsigned int sizeof_type;
- int is_ptr;
- char *b_data;
-
- max_dims = at->dims;
- num_dims = at->num_dims;
-
- if ((at->num_elements == 0)
- || (num_dims == 1))
- {
- bt = SLang_duplicate_array (at);
- if (num_dims == 1) bt->num_dims = 2;
- goto transpose_dims;
- }
-
- /* For numeric arrays skip the overhead below */
- if (num_dims == 2)
- {
- bt = allocate_transposed_array (at);
- if (bt == NULL) return NULL;
-
- switch (at->data_type)
- {
- case SLANG_INT_TYPE:
- case SLANG_UINT_TYPE:
- return transpose_ints (at, bt);
- case SLANG_DOUBLE_TYPE:
- return transpose_doubles (at, bt);
- case SLANG_FLOAT_TYPE:
- return transpose_floats (at, bt);
- case SLANG_CHAR_TYPE:
- case SLANG_UCHAR_TYPE:
- return transpose_chars (at, bt);
- case SLANG_LONG_TYPE:
- case SLANG_ULONG_TYPE:
- return transpose_longs (at, bt);
- case SLANG_SHORT_TYPE:
- case SLANG_USHORT_TYPE:
- return transpose_shorts (at, bt);
- }
- }
- else
- {
- bt = SLang_create_array (at->data_type, 0, NULL, max_dims, num_dims);
- if (bt == NULL) return NULL;
- }
-
- sizeof_type = at->sizeof_type;
- is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-
- memset ((char *)dims, 0, sizeof(dims));
-
- b_data = (char *) bt->data;
-
- do
- {
- if (-1 == _SLarray_aget_transfer_elem (at, dims, (VOID_STAR) b_data,
- sizeof_type, is_ptr))
- {
- SLang_free_array (bt);
- return NULL;
- }
- b_data += sizeof_type;
- }
- while (0 == next_transposed_index (dims, max_dims, num_dims));
-
- transpose_dims:
-
- num_dims = bt->num_dims;
- for (i = 0; i < (int) num_dims; i++)
- bt->dims[i] = max_dims [num_dims - i - 1];
-
- return bt;
-}
-
-static void array_transpose (SLang_Array_Type *at)
-{
- if (NULL != (at = transpose (at)))
- (void) SLang_push_array (at, 1);
-}
-
-static int get_inner_product_parms (SLang_Array_Type *a, int *dp,
- unsigned int *loops, unsigned int *other)
-{
- int num_dims;
- int d;
-
- d = *dp;
-
- num_dims = (int)a->num_dims;
- if (num_dims == 0)
- {
- SLang_verror (SL_INVALID_PARM, "Inner-product operation requires an array of at least 1 dimension.");
- return -1;
- }
-
- /* An index of -1 refers to last dimension */
- if (d == -1)
- d += num_dims;
- *dp = d;
-
- if (a->num_elements == 0)
- { /* [] # [] ==> [] */
- *loops = *other = 0;
- return 0;
- }
-
- *loops = a->num_elements / a->dims[d];
-
- if (d == 0)
- {
- *other = *loops; /* a->num_elements / a->dims[0]; */
- return 0;
- }
-
- *other = a->dims[d];
- return 0;
-}
-
-/* This routines takes two arrays A_i..j and B_j..k and produces a third
- * via C_i..k = A_i..j B_j..k.
- *
- * If A is a vector, and B is a 2-d matrix, then regard A as a 2-d matrix
- * with 1-column.
- */
-static void do_inner_product (void)
-{
- SLang_Array_Type *a, *b, *c;
- void (*fun)(SLang_Array_Type *, SLang_Array_Type *, SLang_Array_Type *,
- unsigned int, unsigned int, unsigned int, unsigned int,
- unsigned int);
- unsigned char c_type;
- int dims[SLARRAY_MAX_DIMS];
- int status;
- unsigned int a_loops, b_loops, b_inc, a_stride;
- int ai_dims, i, j;
- unsigned int num_dims, a_num_dims, b_num_dims;
- int ai, bi;
-
- /* The result of a inner_product will be either a float, double, or
- * a complex number.
- *
- * If an integer array is used, it will be promoted to a float.
- */
-
- switch (SLang_peek_at_stack1 ())
- {
- case SLANG_DOUBLE_TYPE:
- if (-1 == SLang_pop_array_of_type (&b, SLANG_DOUBLE_TYPE))
- return;
- break;
-
-#if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- if (-1 == SLang_pop_array_of_type (&b, SLANG_COMPLEX_TYPE))
- return;
- break;
-#endif
- case SLANG_FLOAT_TYPE:
- default:
- if (-1 == SLang_pop_array_of_type (&b, SLANG_FLOAT_TYPE))
- return;
- break;
- }
-
- switch (SLang_peek_at_stack1 ())
- {
- case SLANG_DOUBLE_TYPE:
- status = SLang_pop_array_of_type (&a, SLANG_DOUBLE_TYPE);
- break;
-
-#if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- status = SLang_pop_array_of_type (&a, SLANG_COMPLEX_TYPE);
- break;
-#endif
- case SLANG_FLOAT_TYPE:
- default:
- status = SLang_pop_array_of_type (&a, SLANG_FLOAT_TYPE);
- break;
- }
-
- if (status == -1)
- {
- SLang_free_array (b);
- return;
- }
-
- ai = -1; /* last index of a */
- bi = 0; /* first index of b */
- if ((-1 == get_inner_product_parms (a, &ai, &a_loops, &a_stride))
- || (-1 == get_inner_product_parms (b, &bi, &b_loops, &b_inc)))
- {
- SLang_verror (SL_TYPE_MISMATCH, "Array dimensions are not compatible for inner-product");
- goto free_and_return;
- }
-
- a_num_dims = a->num_dims;
- b_num_dims = b->num_dims;
-
- /* Coerse a 1-d vector to 2-d */
- if ((a_num_dims == 1)
- && (b_num_dims == 2)
- && (a->num_elements))
- {
- a_num_dims = 2;
- ai = 1;
- a_loops = a->num_elements;
- a_stride = 1;
- }
-
- if ((ai_dims = a->dims[ai]) != b->dims[bi])
- {
- SLang_verror (SL_TYPE_MISMATCH, "Array dimensions are not compatible for inner-product");
- goto free_and_return;
- }
-
- num_dims = a_num_dims + b_num_dims - 2;
- if (num_dims > SLARRAY_MAX_DIMS)
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "Inner-product result exceed max allowed dimensions");
- goto free_and_return;
- }
-
- if (num_dims)
- {
- j = 0;
- for (i = 0; i < (int)a_num_dims; i++)
- if (i != ai) dims [j++] = a->dims[i];
- for (i = 0; i < (int)b_num_dims; i++)
- if (i != bi) dims [j++] = b->dims[i];
- }
- else
- {
- /* a scalar */
- num_dims = 1;
- dims[0] = 1;
- }
-
- c_type = 0; fun = NULL;
- switch (a->data_type)
- {
- case SLANG_FLOAT_TYPE:
- switch (b->data_type)
- {
- case SLANG_FLOAT_TYPE:
- c_type = SLANG_FLOAT_TYPE;
- fun = innerprod_float_float;
- break;
- case SLANG_DOUBLE_TYPE:
- c_type = SLANG_DOUBLE_TYPE;
- fun = innerprod_float_double;
- break;
-#if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- c_type = SLANG_COMPLEX_TYPE;
- fun = innerprod_float_complex;
- break;
-#endif
- }
- break;
- case SLANG_DOUBLE_TYPE:
- switch (b->data_type)
- {
- case SLANG_FLOAT_TYPE:
- c_type = SLANG_DOUBLE_TYPE;
- fun = innerprod_double_float;
- break;
- case SLANG_DOUBLE_TYPE:
- c_type = SLANG_DOUBLE_TYPE;
- fun = innerprod_double_double;
- break;
-#if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- c_type = SLANG_COMPLEX_TYPE;
- fun = innerprod_double_complex;
- break;
-#endif
- }
- break;
-#if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- c_type = SLANG_COMPLEX_TYPE;
- switch (b->data_type)
- {
- case SLANG_FLOAT_TYPE:
- fun = innerprod_complex_float;
- break;
- case SLANG_DOUBLE_TYPE:
- fun = innerprod_complex_double;
- break;
- case SLANG_COMPLEX_TYPE:
- fun = innerprod_complex_complex;
- break;
- }
- break;
-#endif
- default:
- break;
- }
-
- if (NULL == (c = SLang_create_array (c_type, 0, NULL, dims, num_dims)))
- goto free_and_return;
-
- (*fun)(a, b, c, a_loops, a_stride, b_loops, b_inc, ai_dims);
-
- (void) SLang_push_array (c, 1);
- /* drop */
-
- free_and_return:
- SLang_free_array (a);
- SLang_free_array (b);
-}
-
-
-
-static SLang_Intrin_Fun_Type Array_Fun_Table [] =
-{
- MAKE_INTRINSIC_1("transpose", array_transpose, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_array (void)
-{
- if (-1 == SLadd_intrin_fun_table (Array_Fun_Table, "__SLARRAY__"))
- return -1;
-#if SLANG_HAS_FLOAT
- _SLang_Matrix_Multiply = do_inner_product;
-#endif
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slarrfun.inc b/mdk-stage1/slang/slarrfun.inc
deleted file mode 100644
index 348473a6f..000000000
--- a/mdk-stage1/slang/slarrfun.inc
+++ /dev/null
@@ -1,257 +0,0 @@
-/* -*- mode: C -*- */
-
-/* Some "inline" functions for generic scalar types */
-
-#ifdef TRANSPOSE_2D_ARRAY
-static SLang_Array_Type *TRANSPOSE_2D_ARRAY (SLang_Array_Type *at, SLang_Array_Type *bt)
-{
- GENERIC_TYPE *a_data, *b_data;
- int nr, nc, i;
-
- nr = at->dims[0];
- nc = at->dims[1];
-
- a_data = (GENERIC_TYPE *) at->data;
- b_data = (GENERIC_TYPE *) bt->data;
-
- for (i = 0; i < nr; i++)
- {
- GENERIC_TYPE *offset = b_data + i;
- int j;
- for (j = 0; j < nc; j++)
- {
- *offset = *a_data++;
- offset += nr;
- }
- }
- return bt;
-}
-#undef TRANSPOSE_2D_ARRAY
-#endif
-
-
-#ifdef INNERPROD_FUNCTION
-
-static void INNERPROD_FUNCTION
- (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
- unsigned int a_loops, unsigned int a_stride,
- unsigned int b_loops, unsigned int b_inc,
- unsigned int inner_loops)
-{
- GENERIC_TYPE_A *a;
- GENERIC_TYPE_B *b;
- GENERIC_TYPE_C *c;
-
- c = (GENERIC_TYPE_C *) ct->data;
- b = (GENERIC_TYPE_B *) bt->data;
- a = (GENERIC_TYPE_A *) at->data;
-
- while (a_loops--)
- {
- GENERIC_TYPE_B *bb;
- unsigned int j;
-
- bb = b;
-
- for (j = 0; j < inner_loops; j++)
- {
- double x = (double) a[j];
-
- if (x != 0.0)
- {
- unsigned int k;
-
- for (k = 0; k < b_loops; k++)
- c[k] += x * bb[k];
- }
- bb += b_inc;
- }
- c += b_loops;
- a += a_stride;
- }
-}
-#undef INNERPROD_FUNCTION
-
-#undef GENERIC_TYPE_A
-#undef GENERIC_TYPE_B
-#undef GENERIC_TYPE_C
-#endif
-
-#ifdef INNERPROD_COMPLEX_A
-static void INNERPROD_COMPLEX_A
- (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
- unsigned int a_loops, unsigned int a_stride,
- unsigned int b_loops, unsigned int b_inc,
- unsigned int inner_loops)
-{
- double *a;
- GENERIC_TYPE *b;
- double *c;
-
- c = (double *) ct->data;
- b = (GENERIC_TYPE *) bt->data;
- a = (double *) at->data;
-
- a_stride *= 2;
-
- while (a_loops--)
- {
- GENERIC_TYPE *bb;
- unsigned int bb_loops;
-
- bb = b;
- bb_loops = b_loops;
-
- while (bb_loops--)
- {
- double real_sum;
- double imag_sum;
- unsigned int iloops;
- double *aa;
- GENERIC_TYPE *bbb;
-
- aa = a;
- bbb = bb;
- iloops = inner_loops;
-
- real_sum = 0.0;
- imag_sum = 0.0;
- while (iloops--)
- {
- real_sum += aa[0] * (double)bbb[0];
- imag_sum += aa[1] * (double)bbb[0];
- aa += 2;
- bbb += b_inc;
- }
-
- *c++ = real_sum;
- *c++ = imag_sum;
- bb++;
- }
-
- a += a_stride;
- }
-}
-
-static void INNERPROD_A_COMPLEX
- (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
- unsigned int a_loops, unsigned int a_stride,
- unsigned int b_loops, unsigned int b_inc,
- unsigned int inner_loops)
-{
- GENERIC_TYPE *a;
- double *b;
- double *c;
-
- c = (double *) ct->data;
- b = (double *) bt->data;
- a = (GENERIC_TYPE *) at->data;
-
- b_inc *= 2;
-
- while (a_loops--)
- {
- double *bb;
- unsigned int bb_loops;
-
- bb = b;
- bb_loops = b_loops;
-
- while (bb_loops--)
- {
- double real_sum;
- double imag_sum;
- unsigned int iloops;
- GENERIC_TYPE *aa;
- double *bbb;
-
- aa = a;
- bbb = bb;
- iloops = inner_loops;
-
- real_sum = 0.0;
- imag_sum = 0.0;
- while (iloops--)
- {
- real_sum += (double)aa[0] * bbb[0];
- imag_sum += (double)aa[0] * bbb[1];
- aa += 1;
- bbb += b_inc;
- }
-
- *c++ = real_sum;
- *c++ = imag_sum;
- bb += 2;
- }
-
- a += a_stride;
- }
-}
-
-#undef INNERPROD_A_COMPLEX
-#undef INNERPROD_COMPLEX_A
-#endif /* INNERPROD_COMPLEX_A */
-
-
-#ifdef INNERPROD_COMPLEX_COMPLEX
-static void INNERPROD_COMPLEX_COMPLEX
- (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
- unsigned int a_loops, unsigned int a_stride,
- unsigned int b_loops, unsigned int b_inc,
- unsigned int inner_loops)
-{
- double *a;
- double *b;
- double *c;
-
- c = (double *) ct->data;
- b = (double *) bt->data;
- a = (double *) at->data;
-
- a_stride *= 2;
- b_inc *= 2;
-
- while (a_loops--)
- {
- double *bb;
- unsigned int bb_loops;
-
- bb = b;
- bb_loops = b_loops;
-
- while (bb_loops--)
- {
- double real_sum;
- double imag_sum;
- unsigned int iloops;
- double *aa;
- double *bbb;
-
- aa = a;
- bbb = bb;
- iloops = inner_loops;
-
- real_sum = 0.0;
- imag_sum = 0.0;
- while (iloops--)
- {
- real_sum += aa[0]*bbb[0] - aa[1]*bbb[1];
- imag_sum += aa[0]*bbb[1] + aa[1]*bbb[0];
- aa += 2;
- bbb += b_inc;
- }
-
- *c++ = real_sum;
- *c++ = imag_sum;
- bb += 2;
- }
-
- a += a_stride;
- }
-}
-#undef INNERPROD_COMPLEX_COMPLEX
-#endif
-
-#ifdef GENERIC_TYPE
-# undef GENERIC_TYPE
-#endif
diff --git a/mdk-stage1/slang/slarrmis.c b/mdk-stage1/slang/slarrmis.c
deleted file mode 100644
index 330dcb53f..000000000
--- a/mdk-stage1/slang/slarrmis.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Misc Array Functions */
-/* Copyright (c) 1997, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-int SLang_get_array_element (SLang_Array_Type *at, int *indices, VOID_STAR data)
-{
- int is_ptr;
-
- if ((at == NULL)
- || (indices == NULL)
- || (data == NULL))
- return -1;
-
- is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
- if (is_ptr) *(VOID_STAR *) data = NULL;
- return _SLarray_aget_transfer_elem (at, indices, data, at->sizeof_type, is_ptr);
-}
-
-int SLang_set_array_element (SLang_Array_Type *at, int *indices, VOID_STAR data)
-{
- if ((at == NULL)
- || (indices == NULL)
- || (data == NULL))
- return -1;
-
- return _SLarray_aput_transfer_elem (at, indices, data, at->sizeof_type,
- at->flags & SLARR_DATA_VALUE_IS_POINTER);
-}
-
diff --git a/mdk-stage1/slang/slassoc.c b/mdk-stage1/slang/slassoc.c
deleted file mode 100644
index 5997458d2..000000000
--- a/mdk-stage1/slang/slassoc.c
+++ /dev/null
@@ -1,713 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-#define USE_NEW_ANYTYPE_CODE 1
-
-typedef struct _SLAssoc_Array_Element_Type
-{
- char *key; /* slstring */
- struct _SLAssoc_Array_Element_Type *next;
- SLang_Object_Type value;
-}
-_SLAssoc_Array_Element_Type;
-
-typedef struct
-{
- _SLAssoc_Array_Element_Type *elements[SLASSOC_HASH_TABLE_SIZE];
- SLang_Object_Type default_value;
- unsigned int num_elements;
-#define HAS_DEFAULT_VALUE 1
- unsigned int flags;
- unsigned char type;
-}
-SLang_Assoc_Array_Type;
-
-#define USE_CACHED_STRING 1
-
-#if USE_CACHED_STRING
-static char *Cached_String;
-static SLang_Object_Type *Cached_Obj;
-static SLang_Assoc_Array_Type *Cached_Array;
-#endif
-
-static SLang_Assoc_Array_Type *alloc_assoc_array (unsigned char type, int has_default_value)
-{
- SLang_Assoc_Array_Type *a;
-
- a = (SLang_Assoc_Array_Type *)SLmalloc (sizeof (SLang_Assoc_Array_Type));
- if (a == NULL)
- {
- if (has_default_value)
- SLdo_pop_n (1);
- return NULL;
- }
-
- memset ((char *) a, 0, sizeof (SLang_Assoc_Array_Type));
- a->type = type;
-
- if (has_default_value)
- {
- if (
-#if USE_NEW_ANYTYPE_CODE
- ((type != SLANG_ANY_TYPE) && (-1 == SLclass_typecast (type, 1, 1)))
-#else
- (-1 == SLclass_typecast (type, 1, 1))
-#endif
- || (-1 == SLang_pop (&a->default_value)))
- {
- SLfree ((char *) a);
- return NULL;
- }
-
- a->flags |= HAS_DEFAULT_VALUE;
- }
- return a;
-}
-
-static void free_element (_SLAssoc_Array_Element_Type *e)
-{
- if (e == NULL)
- return;
-
- SLang_free_object (&e->value);
- SLang_free_slstring (e->key);
-#if USE_CACHED_STRING
- if (e->key == Cached_String)
- Cached_String = NULL;
-#endif
- SLfree ((char *)e);
-}
-
-static void delete_assoc_array (SLang_Assoc_Array_Type *a)
-{
- unsigned int i;
-
- if (a == NULL) return;
-
- for (i = 0; i < SLASSOC_HASH_TABLE_SIZE; i++)
- {
- _SLAssoc_Array_Element_Type *e;
-
- e = a->elements[i];
- while (e != NULL)
- {
- _SLAssoc_Array_Element_Type *next_e;
-
- next_e = e->next;
- free_element (e);
- e = next_e;
- }
- }
- if (a->flags & HAS_DEFAULT_VALUE)
- SLang_free_object (&a->default_value);
-
- SLfree ((char *) a);
-}
-
-_INLINE_
-static SLang_Object_Type *
-find_element (SLang_Assoc_Array_Type *a, char *str, unsigned long hash)
-{
- unsigned int h;
- _SLAssoc_Array_Element_Type *e;
-
- h = (unsigned int) (hash % SLASSOC_HASH_TABLE_SIZE);
- e = a->elements[h];
-
- while (e != NULL)
- {
- if (str == e->key) /* slstrings can be compared this way */
- {
-#if USE_CACHED_STRING
- Cached_String = str;
- Cached_Obj = &e->value;
- Cached_Array = a;
-#endif
- return &e->value;
- }
-
- e = e->next;
- }
-
- return NULL;
-}
-
-static _SLAssoc_Array_Element_Type *
-create_element (SLang_Assoc_Array_Type *a, char *str, unsigned long hash)
-{
- unsigned int h;
- _SLAssoc_Array_Element_Type *e;
-
- e = (_SLAssoc_Array_Element_Type *) SLmalloc (sizeof (_SLAssoc_Array_Element_Type));
- if (e == NULL)
- return NULL;
-
- memset ((char *) e, 0, sizeof (_SLAssoc_Array_Element_Type));
- h = (unsigned int) (hash % SLASSOC_HASH_TABLE_SIZE);
-
- if (NULL == (str = _SLstring_dup_hashed_string (str, hash)))
- {
- SLfree ((char *) e);
- return NULL;
- }
-
- e->key = str;
- e->next = a->elements[h];
- a->elements[h] = e;
-
- a->num_elements += 1;
-#if USE_CACHED_STRING
- Cached_String = str;
- Cached_Obj = &e->value;
- Cached_Array = a;
-#endif
- return e;
-}
-
-static int store_object (SLang_Assoc_Array_Type *a, char *s, SLang_Object_Type *obj)
-{
- unsigned long hash;
- SLang_Object_Type *v;
-
-#if USE_CACHED_STRING
- if ((s == Cached_String) && (a == Cached_Array))
- {
- v = Cached_Obj;
- SLang_free_object (v);
- }
- else
- {
-#endif
- hash = _SLcompute_string_hash (s);
- if (NULL != (v = find_element (a, s, hash)))
- SLang_free_object (v);
- else
- {
- _SLAssoc_Array_Element_Type *e;
-
- e = create_element (a, s, hash);
- if (e == NULL)
- return -1;
-
- v = &e->value;
- }
-#if USE_CACHED_STRING
- }
-#endif
-
- *v = *obj;
-
- return 0;
-}
-
-static void assoc_destroy (unsigned char type, VOID_STAR ptr)
-{
- (void) type;
- delete_assoc_array ((SLang_Assoc_Array_Type *) ptr);
-}
-
-static int pop_index (unsigned int num_indices,
- SLang_MMT_Type **mmt,
- SLang_Assoc_Array_Type **a,
- char **str)
-{
- if (NULL == (*mmt = SLang_pop_mmt (SLANG_ASSOC_TYPE)))
- {
- *a = NULL;
- *str = NULL;
- return -1;
- }
-
- if ((num_indices != 1)
- || (-1 == SLang_pop_slstring (str)))
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "Assoc_Type arrays require a single string index");
- SLang_free_mmt (*mmt);
- *mmt = NULL;
- *a = NULL;
- *str = NULL;
- return -1;
- }
-
- *a = (SLang_Assoc_Array_Type *) SLang_object_from_mmt (*mmt);
- return 0;
-}
-
-static int assoc_aget (unsigned char type, unsigned int num_indices)
-{
- SLang_MMT_Type *mmt;
- char *str;
- SLang_Assoc_Array_Type *a;
- SLang_Object_Type *obj;
- int ret;
-
- (void) type;
-
- if (-1 == pop_index (num_indices, &mmt, &a, &str))
- return -1;
-
-#if USE_CACHED_STRING
- if ((str == Cached_String) && (a == Cached_Array))
- obj = Cached_Obj;
- else
-#endif
- obj = find_element (a, str, _SLcompute_string_hash (str));
-
- if ((obj == NULL)
- && (a->flags & HAS_DEFAULT_VALUE))
- obj = &a->default_value;
-
- if (obj == NULL)
- {
- SLang_verror (SL_INTRINSIC_ERROR,
- "No such element in Assoc Array: %s", str);
- ret = -1;
- }
- else
- {
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type[obj->data_type])
- ret = SLang_push (obj);
-#endif
- else
- ret = _SLpush_slang_obj (obj);
- }
-
- SLang_free_slstring (str);
- SLang_free_mmt (mmt);
- return ret;
-}
-
-static int assoc_aput (unsigned char type, unsigned int num_indices)
-{
- SLang_MMT_Type *mmt;
- char *str;
- SLang_Assoc_Array_Type *a;
- SLang_Object_Type obj;
- int ret;
-
- (void) type;
-
- if (-1 == pop_index (num_indices, &mmt, &a, &str))
- return -1;
-
- ret = -1;
-
- if (0 == SLang_pop (&obj))
- {
- if ((obj.data_type != a->type)
-#if USE_NEW_ANYTYPE_CODE
- && (a->type != SLANG_ANY_TYPE)
-#endif
- )
- {
- (void) SLang_push (&obj);
- if ((-1 == SLclass_typecast (a->type, 1, 1))
- || (-1 == SLang_pop (&obj)))
- goto the_return;
- }
-
- if (-1 == store_object (a, str, &obj))
- SLang_free_object (&obj);
- else
- ret = 0;
- }
-
- the_return:
- SLang_free_slstring (str);
- SLang_free_mmt (mmt);
- return ret;
-}
-
-static int assoc_anew (unsigned char type, unsigned int num_dims)
-{
- SLang_MMT_Type *mmt;
- SLang_Assoc_Array_Type *a;
- int has_default_value;
-
- has_default_value = 0;
- switch (num_dims)
- {
- case 0:
- type = SLANG_ANY_TYPE;
- break;
- case 2:
- (void) SLreverse_stack (2);
- has_default_value = 1;
- /* drop */
- case 1:
- if (0 == _SLang_pop_datatype (&type))
- break;
- num_dims--;
- /* drop */
- default:
- SLdo_pop_n (num_dims);
- SLang_verror (SL_SYNTAX_ERROR, "Usage: Assoc_Type [DataType_Type]");
- return -1;
- }
-
- a = alloc_assoc_array (type, has_default_value);
- if (a == NULL)
- return -1;
-
- if (NULL == (mmt = SLang_create_mmt (SLANG_ASSOC_TYPE, (VOID_STAR) a)))
- {
- delete_assoc_array (a);
- return -1;
- }
-
- if (-1 == SLang_push_mmt (mmt))
- {
- SLang_free_mmt (mmt);
- return -1;
- }
-
- return 0;
-}
-
-static void assoc_get_keys (SLang_Assoc_Array_Type *a)
-{
- SLang_Array_Type *at;
- int num;
- unsigned int i, j;
- char **data;
-
- /* Note: If support for threads is added, then we need to modify this
- * algorithm to prevent another thread from modifying the array.
- * However, that should be handled in inner_interp.
- */
- num = a->num_elements;
-
- if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &num, 1)))
- return;
-
- data = (char **)at->data;
-
- i = 0;
- for (j = 0; j < SLASSOC_HASH_TABLE_SIZE; j++)
- {
- _SLAssoc_Array_Element_Type *e;
-
- e = a->elements[j];
- while (e != NULL)
- {
- /* Next cannot fail because it is an slstring */
- data [i] = SLang_create_slstring (e->key);
- e = e->next;
- i++;
- }
- }
- (void) SLang_push_array (at, 1);
-}
-
-static int
-transfer_element (SLang_Class_Type *cl, VOID_STAR dest_data,
- SLang_Object_Type *obj)
-{
- unsigned int sizeof_type;
- VOID_STAR src_data;
-
-#if USE_NEW_ANYTYPE_CODE
- if (cl->cl_data_type == SLANG_ANY_TYPE)
- {
- SLang_Any_Type *any;
-
- if ((-1 == _SLpush_slang_obj (obj))
- || (-1 == SLang_pop_anytype (&any)))
- return -1;
-
- *(SLang_Any_Type **)dest_data = any;
- return 0;
- }
-#endif
- /* Optimize for scalar */
- if (cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
- {
- sizeof_type = cl->cl_sizeof_type;
- memcpy ((char *) dest_data, (char *)&obj->v, sizeof_type);
- return 0;
- }
-
- src_data = _SLclass_get_ptr_to_value (cl, obj);
-
- if (-1 == (*cl->cl_acopy) (cl->cl_data_type, src_data, dest_data))
- return -1;
-
- return 0;
-}
-
-static void assoc_get_values (SLang_Assoc_Array_Type *a)
-{
- SLang_Array_Type *at;
- int num;
- unsigned int i, j;
- char *dest_data;
- unsigned char type;
- SLang_Class_Type *cl;
- unsigned int sizeof_type;
-
- /* Note: If support for threads is added, then we need to modify this
- * algorithm to prevent another thread from modifying the array.
- * However, that should be handled in inner_interp.
- */
- num = a->num_elements;
- type = a->type;
-
- cl = _SLclass_get_class (type);
- sizeof_type = cl->cl_sizeof_type;
-
- if (NULL == (at = SLang_create_array (type, 0, NULL, &num, 1)))
- return;
-
- dest_data = (char *)at->data;
-
- i = 0;
- for (j = 0; j < SLASSOC_HASH_TABLE_SIZE; j++)
- {
- _SLAssoc_Array_Element_Type *e;
-
- e = a->elements[j];
- while (e != NULL)
- {
- if (-1 == transfer_element (cl, (VOID_STAR) dest_data, &e->value))
- {
- SLang_free_array (at);
- return;
- }
-
- dest_data += sizeof_type;
- e = e->next;
- i++;
- }
- }
- (void) SLang_push_array (at, 1);
-}
-
-static int assoc_key_exists (SLang_Assoc_Array_Type *a, char *key)
-{
- return (NULL != find_element (a, key, _SLcompute_string_hash (key)));
-}
-
-static void assoc_delete_key (SLang_Assoc_Array_Type *a, char *key)
-{
- unsigned int h;
- _SLAssoc_Array_Element_Type *v, *v0;
-
- h = (unsigned int) (_SLcompute_string_hash (key) % SLASSOC_HASH_TABLE_SIZE);
-
- v0 = NULL;
- v = a->elements[h];
- while (v != NULL)
- {
- if (v->key == key)
- {
- if (v0 != NULL)
- v0->next = v->next;
- else
- a->elements[h] = v->next;
-
- free_element (v);
- a->num_elements -= 1;
- return;
- }
- v0 = v;
- v = v->next;
- }
-
- /* No such element. Let it pass with no error. */
-}
-
-#define A SLANG_ASSOC_TYPE
-#define S SLANG_STRING_TYPE
-static SLang_Intrin_Fun_Type Assoc_Table [] =
-{
- MAKE_INTRINSIC_1("assoc_get_keys", assoc_get_keys, SLANG_VOID_TYPE, A),
- MAKE_INTRINSIC_1("assoc_get_values", assoc_get_values, SLANG_VOID_TYPE, A),
- MAKE_INTRINSIC_2("assoc_key_exists", assoc_key_exists, SLANG_INT_TYPE, A, S),
- MAKE_INTRINSIC_2("assoc_delete_key", assoc_delete_key, SLANG_VOID_TYPE, A, S),
-
- SLANG_END_INTRIN_FUN_TABLE
-};
-#undef A
-#undef S
-
-static int assoc_length (unsigned char type, VOID_STAR v, unsigned int *len)
-{
- SLang_Assoc_Array_Type *a;
-
- (void) type;
- a = (SLang_Assoc_Array_Type *) SLang_object_from_mmt (*(SLang_MMT_Type **)v);
- *len = a->num_elements;
- return 0;
-}
-
-struct _SLang_Foreach_Context_Type
-{
- SLang_MMT_Type *mmt;
- SLang_Assoc_Array_Type *a;
- unsigned int this_hash_index;
- unsigned int next_same_hash_index;
-#define CTX_WRITE_KEYS 1
-#define CTX_WRITE_VALUES 2
- unsigned char flags;
-};
-
-static SLang_Foreach_Context_Type *
-cl_foreach_open (unsigned char type, unsigned int num)
-{
- SLang_Foreach_Context_Type *c;
- unsigned char flags;
- SLang_MMT_Type *mmt;
-
- (void) type;
-
- if (NULL == (mmt = SLang_pop_mmt (SLANG_ASSOC_TYPE)))
- return NULL;
-
- flags = 0;
-
- while (num--)
- {
- char *s;
-
- if (-1 == SLang_pop_slstring (&s))
- {
- SLang_free_mmt (mmt);
- return NULL;
- }
-
- if (0 == strcmp (s, "keys"))
- flags |= CTX_WRITE_KEYS;
- else if (0 == strcmp (s, "values"))
- flags |= CTX_WRITE_VALUES;
- else
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "using '%s' not supported by SLassoc_Type",
- s);
- SLang_free_slstring (s);
- SLang_free_mmt (mmt);
- return NULL;
- }
-
- SLang_free_slstring (s);
- }
-
- if (NULL == (c = (SLang_Foreach_Context_Type *) SLmalloc (sizeof (SLang_Foreach_Context_Type))))
- {
- SLang_free_mmt (mmt);
- return NULL;
- }
-
- memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
- if (flags == 0) flags = CTX_WRITE_VALUES|CTX_WRITE_KEYS;
-
- c->flags = flags;
- c->mmt = mmt;
- c->a = (SLang_Assoc_Array_Type *) SLang_object_from_mmt (mmt);
-
- return c;
-}
-
-static void cl_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- (void) type;
- if (c == NULL) return;
- SLang_free_mmt (c->mmt);
- SLfree ((char *) c);
-}
-
-static int cl_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- SLang_Assoc_Array_Type *a;
- _SLAssoc_Array_Element_Type *e;
- unsigned int i, j;
-
- (void) type;
-
- if (c == NULL)
- return -1;
-
- a = c->a;
-
- i = c->this_hash_index;
- if (i >= SLASSOC_HASH_TABLE_SIZE)
- return 0;
-
- e = a->elements[i];
-
- j = c->next_same_hash_index;
- c->next_same_hash_index = j + 1;
-
- while ((j > 0) && (e != NULL))
- {
- j--;
- e = e->next;
- }
-
- if (e == NULL)
- {
- do
- {
- i++;
- if (i >= SLASSOC_HASH_TABLE_SIZE)
- return 0; /* no more */
- }
- while (a->elements [i] == NULL);
-
- e = a->elements[i];
- c->this_hash_index = i;
- c->next_same_hash_index = 1;
- }
-
- if ((c->flags & CTX_WRITE_KEYS)
- && (-1 == SLang_push_string (e->key)))
- return -1;
-
- if ((c->flags & CTX_WRITE_VALUES)
- && (-1 == _SLpush_slang_obj (&e->value)))
- return -1;
-
- /* keep going */
- return 1;
-}
-
-int SLang_init_slassoc (void)
-{
- SLang_Class_Type *cl;
-
- if (SLclass_is_class_defined (SLANG_ASSOC_TYPE))
- return 0;
-
- if (NULL == (cl = SLclass_allocate_class ("Assoc_Type")))
- return -1;
-
- (void) SLclass_set_destroy_function (cl, assoc_destroy);
- (void) SLclass_set_aput_function (cl, assoc_aput);
- (void) SLclass_set_aget_function (cl, assoc_aget);
- (void) SLclass_set_anew_function (cl, assoc_anew);
- cl->cl_length = assoc_length;
- cl->cl_foreach_open = cl_foreach_open;
- cl->cl_foreach_close = cl_foreach_close;
- cl->cl_foreach = cl_foreach;
-
- if (-1 == SLclass_register_class (cl, SLANG_ASSOC_TYPE, sizeof (SLang_Assoc_Array_Type), SLANG_CLASS_TYPE_MMT))
- return -1;
-
- if (-1 == SLadd_intrin_fun_table (Assoc_Table, "__SLASSOC__"))
- return -1;
-
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slbstr.c b/mdk-stage1/slang/slbstr.c
deleted file mode 100644
index b4b8c4c51..000000000
--- a/mdk-stage1/slang/slbstr.c
+++ /dev/null
@@ -1,615 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-struct _SLang_BString_Type
-{
- unsigned int num_refs;
- unsigned int len;
- int ptr_type;
-#define IS_SLSTRING 1
-#define IS_MALLOCED 2
-#define IS_NOT_TO_BE_FREED 3
- union
- {
- unsigned char bytes[1];
- unsigned char *ptr;
- }
- v;
-};
-
-#define BS_GET_POINTER(b) ((b)->ptr_type ? (b)->v.ptr : (b)->v.bytes)
-
-static SLang_BString_Type *create_bstring_of_type (char *bytes, unsigned int len, int type)
-{
- SLang_BString_Type *b;
- unsigned int size;
-
- size = sizeof(SLang_BString_Type);
- if (type == 0)
- size += len;
-
- if (NULL == (b = (SLang_BString_Type *)SLmalloc (size)))
- return NULL;
-
- b->len = len;
- b->num_refs = 1;
- b->ptr_type = type;
-
- switch (type)
- {
- case 0:
- if (bytes != NULL) memcpy ((char *) b->v.bytes, bytes, len);
- /* Now \0 terminate it because we want to also use it as a C string
- * whenever possible. Note that sizeof(SLang_BString_Type) includes
- * space for 1 character and we allocated len extra bytes. Thus, it is
- * ok to add a \0 to the end.
- */
- b->v.bytes[len] = 0;
- break;
-
- case IS_SLSTRING:
- if (NULL == (b->v.ptr = (unsigned char *)SLang_create_nslstring (bytes, len)))
- {
- SLfree ((char *) b);
- return NULL;
- }
- break;
-
- case IS_MALLOCED:
- case IS_NOT_TO_BE_FREED:
- b->v.ptr = (unsigned char *)bytes;
- bytes [len] = 0; /* NULL terminate */
- break;
- }
-
- return b;
-}
-
-SLang_BString_Type *
-SLbstring_create (unsigned char *bytes, unsigned int len)
-{
- return create_bstring_of_type ((char *)bytes, len, 0);
-}
-
-/* Note that ptr must be len + 1 bytes long for \0 termination */
-SLang_BString_Type *
-SLbstring_create_malloced (unsigned char *ptr, unsigned int len, int free_on_error)
-{
- SLang_BString_Type *b;
-
- if (ptr == NULL)
- return NULL;
-
- if (NULL == (b = create_bstring_of_type ((char *)ptr, len, IS_MALLOCED)))
- {
- if (free_on_error)
- SLfree ((char *) ptr);
- }
- return b;
-}
-
-SLang_BString_Type *SLbstring_create_slstring (char *s)
-{
- if (s == NULL)
- return NULL;
-
- return create_bstring_of_type (s, strlen (s), IS_SLSTRING);
-}
-
-SLang_BString_Type *SLbstring_dup (SLang_BString_Type *b)
-{
- if (b != NULL)
- b->num_refs += 1;
-
- return b;
-}
-
-unsigned char *SLbstring_get_pointer (SLang_BString_Type *b, unsigned int *len)
-{
- if (b == NULL)
- {
- *len = 0;
- return NULL;
- }
- *len = b->len;
- return BS_GET_POINTER(b);
-}
-
-void SLbstring_free (SLang_BString_Type *b)
-{
- if (b == NULL)
- return;
-
- if (b->num_refs > 1)
- {
- b->num_refs -= 1;
- return;
- }
-
- switch (b->ptr_type)
- {
- case 0:
- case IS_NOT_TO_BE_FREED:
- default:
- break;
-
- case IS_SLSTRING:
- SLang_free_slstring ((char *)b->v.ptr);
- break;
-
- case IS_MALLOCED:
- SLfree ((char *)b->v.ptr);
- break;
- }
-
- SLfree ((char *) b);
-}
-
-int SLang_pop_bstring (SLang_BString_Type **b)
-{
- return SLclass_pop_ptr_obj (SLANG_BSTRING_TYPE, (VOID_STAR *)b);
-}
-
-int SLang_push_bstring (SLang_BString_Type *b)
-{
- if (b == NULL)
- return SLang_push_null ();
-
- b->num_refs += 1;
-
- if (0 == SLclass_push_ptr_obj (SLANG_BSTRING_TYPE, (VOID_STAR)b))
- return 0;
-
- b->num_refs -= 1;
- return -1;
-}
-
-static int
-bstring_bstring_bin_op_result (int op, unsigned char a, unsigned char b,
- unsigned char *c)
-{
- (void) a;
- (void) b;
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_PLUS:
- *c = SLANG_BSTRING_TYPE;
- break;
-
- case SLANG_GT:
- case SLANG_GE:
- case SLANG_LT:
- case SLANG_LE:
- case SLANG_EQ:
- case SLANG_NE:
- *c = SLANG_CHAR_TYPE;
- break;
- }
- return 1;
-}
-
-static int compare_bstrings (SLang_BString_Type *a, SLang_BString_Type *b)
-{
- unsigned int len;
- int ret;
-
- len = a->len;
- if (b->len < len) len = b->len;
-
- ret = memcmp ((char *)BS_GET_POINTER(b), (char *)BS_GET_POINTER(a), len);
- if (ret != 0)
- return ret;
-
- if (a->len > b->len)
- return 1;
- if (a->len == b->len)
- return 0;
-
- return -1;
-}
-
-static SLang_BString_Type *
-concat_bstrings (SLang_BString_Type *a, SLang_BString_Type *b)
-{
- unsigned int len;
- SLang_BString_Type *c;
- char *bytes;
-
- len = a->len + b->len;
-
- if (NULL == (c = SLbstring_create (NULL, len)))
- return NULL;
-
- bytes = (char *)BS_GET_POINTER(c);
-
- memcpy (bytes, (char *)BS_GET_POINTER(a), a->len);
- memcpy (bytes + a->len, (char *)BS_GET_POINTER(b), b->len);
-
- return c;
-}
-
-static void free_n_bstrings (SLang_BString_Type **a, unsigned int n)
-{
- unsigned int i;
-
- if (a == NULL) return;
-
- for (i = 0; i < n; i++)
- {
- SLbstring_free (a[i]);
- a[i] = NULL;
- }
-}
-
-static int
-bstring_bstring_bin_op (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- char *ic;
- SLang_BString_Type **a, **b, **c;
- unsigned int n, n_max;
- unsigned int da, db;
-
- (void) a_type;
- (void) b_type;
-
- if (na == 1) da = 0; else da = 1;
- if (nb == 1) db = 0; else db = 1;
-
- if (na > nb) n_max = na; else n_max = nb;
-
- a = (SLang_BString_Type **) ap;
- b = (SLang_BString_Type **) bp;
- for (n = 0; n < n_max; n++)
- {
- if ((*a == NULL) || (*b == NULL))
- {
- SLang_verror (SL_VARIABLE_UNINITIALIZED,
- "Binary string element[%u] not initialized for binary operation", n);
- return -1;
- }
- a += da; b += db;
- }
-
- a = (SLang_BString_Type **) ap;
- b = (SLang_BString_Type **) bp;
- ic = (char *) cp;
- c = NULL;
-
- switch (op)
- {
- case SLANG_PLUS:
- /* Concat */
- c = (SLang_BString_Type **) cp;
- for (n = 0; n < n_max; n++)
- {
- if (NULL == (c[n] = concat_bstrings (*a, *b)))
- goto return_error;
-
- a += da; b += db;
- }
- break;
-
- case SLANG_NE:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (0 != compare_bstrings (*a, *b));
- a += da;
- b += db;
- }
- break;
- case SLANG_GT:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (compare_bstrings (*a, *b) > 0);
- a += da;
- b += db;
- }
- break;
- case SLANG_GE:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (compare_bstrings (*a, *b) >= 0);
- a += da;
- b += db;
- }
- break;
- case SLANG_LT:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (compare_bstrings (*a, *b) < 0);
- a += da;
- b += db;
- }
- break;
- case SLANG_LE:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (compare_bstrings (*a, *b) <= 0);
- a += da;
- b += db;
- }
- break;
- case SLANG_EQ:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (compare_bstrings (*a, *b) == 0);
- a += da;
- b += db;
- }
- break;
- }
- return 1;
-
- return_error:
- if (c != NULL)
- {
- free_n_bstrings (c, n);
- while (n < n_max)
- {
- c[n] = NULL;
- n++;
- }
- }
- return -1;
-}
-
-/* If preserve_ptr, then use a[i] as the bstring data. See how this function
- * is called by the binary op routines for why.
- */
-static SLang_BString_Type **
-make_n_bstrings (SLang_BString_Type **b, char **a, unsigned int n, int ptr_type)
-{
- unsigned int i;
- int malloc_flag;
-
- malloc_flag = 0;
- if (b == NULL)
- {
- b = (SLang_BString_Type **) SLmalloc ((n + 1) * sizeof (SLang_BString_Type *));
- if (b == NULL)
- return NULL;
- malloc_flag = 1;
- }
-
- for (i = 0; i < n; i++)
- {
- char *s = a[i];
-
- if (s == NULL)
- {
- b[i] = NULL;
- continue;
- }
-
- if (NULL == (b[i] = create_bstring_of_type (s, strlen(s), ptr_type)))
- {
- free_n_bstrings (b, i);
- if (malloc_flag) SLfree ((char *) b);
- return NULL;
- }
- }
-
- return b;
-}
-
-static int
-bstring_string_bin_op (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- SLang_BString_Type **b;
- int ret;
-
- if (NULL == (b = make_n_bstrings (NULL, (char **)bp, nb, IS_NOT_TO_BE_FREED)))
- return -1;
-
- b_type = SLANG_BSTRING_TYPE;
- ret = bstring_bstring_bin_op (op,
- a_type, ap, na,
- b_type, (VOID_STAR) b, nb,
- cp);
- free_n_bstrings (b, nb);
- SLfree ((char *) b);
- return ret;
-}
-
-static int
-string_bstring_bin_op (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- SLang_BString_Type **a;
- int ret;
-
- if (NULL == (a = make_n_bstrings (NULL, (char **)ap, na, IS_NOT_TO_BE_FREED)))
- return -1;
-
- a_type = SLANG_BSTRING_TYPE;
- ret = bstring_bstring_bin_op (op,
- a_type, (VOID_STAR) a, na,
- b_type, bp, nb,
- cp);
- free_n_bstrings (a, na);
- SLfree ((char *) a);
-
- return ret;
-}
-
-static void bstring_destroy (unsigned char unused, VOID_STAR s)
-{
- (void) unused;
- SLbstring_free (*(SLang_BString_Type **) s);
-}
-
-static int bstring_push (unsigned char unused, VOID_STAR sptr)
-{
- (void) unused;
-
- return SLang_push_bstring (*(SLang_BString_Type **) sptr);
-}
-
-static int string_to_bstring (unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp)
-{
- char **s;
- SLang_BString_Type **b;
-
- (void) a_type;
- (void) b_type;
-
- s = (char **) ap;
- b = (SLang_BString_Type **) bp;
-
- if (NULL == make_n_bstrings (b, s, na, IS_SLSTRING))
- return -1;
-
- return 1;
-}
-
-static int bstring_to_string (unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp)
-{
- char **s;
- unsigned int i;
- SLang_BString_Type **a;
-
- (void) a_type;
- (void) b_type;
-
- s = (char **) bp;
- a = (SLang_BString_Type **) ap;
-
- for (i = 0; i < na; i++)
- {
- SLang_BString_Type *ai = a[i];
-
- if (ai == NULL)
- {
- s[i] = NULL;
- continue;
- }
-
- if (NULL == (s[i] = SLang_create_slstring ((char *)BS_GET_POINTER(ai))))
- {
- while (i != 0)
- {
- i--;
- SLang_free_slstring (s[i]);
- s[i] = NULL;
- }
- return -1;
- }
- }
-
- return 1;
-}
-
-static char *bstring_string (unsigned char type, VOID_STAR v)
-{
- SLang_BString_Type *s;
- unsigned char buf[128];
- unsigned char *bytes, *bytes_max;
- unsigned char *b, *bmax;
-
- (void) type;
-
- s = *(SLang_BString_Type **) v;
- bytes = BS_GET_POINTER(s);
- bytes_max = bytes + s->len;
-
- b = buf;
- bmax = buf + (sizeof (buf) - 4);
-
- while (bytes < bytes_max)
- {
- unsigned char ch = *bytes;
-
- if ((ch < 32) || (ch >= 127) || (ch == '\\'))
- {
- if (b + 4 > bmax)
- break;
-
- sprintf ((char *) b, "\\%03o", ch);
- b += 4;
- }
- else
- {
- if (b == bmax)
- break;
-
- *b++ = ch;
- }
-
- bytes++;
- }
-
- if (bytes < bytes_max)
- {
- *b++ = '.';
- *b++ = '.';
- *b++ = '.';
- }
- *b = 0;
-
- return SLmake_string ((char *)buf);
-}
-
-static unsigned int bstrlen_cmd (SLang_BString_Type *b)
-{
- return b->len;
-}
-
-static SLang_Intrin_Fun_Type BString_Table [] = /*{{{*/
-{
- MAKE_INTRINSIC_1("bstrlen", bstrlen_cmd, SLANG_UINT_TYPE, SLANG_BSTRING_TYPE),
- MAKE_INTRINSIC_0("pack", _SLpack, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_2("unpack", _SLunpack, SLANG_VOID_TYPE, SLANG_STRING_TYPE, SLANG_BSTRING_TYPE),
- MAKE_INTRINSIC_1("pad_pack_format", _SLpack_pad_format, SLANG_VOID_TYPE, SLANG_STRING_TYPE),
- MAKE_INTRINSIC_1("sizeof_pack", _SLpack_compute_size, SLANG_UINT_TYPE, SLANG_STRING_TYPE),
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-int _SLang_init_bstring (void)
-{
- SLang_Class_Type *cl;
-
- if (NULL == (cl = SLclass_allocate_class ("BString_Type")))
- return -1;
- (void) SLclass_set_destroy_function (cl, bstring_destroy);
- (void) SLclass_set_push_function (cl, bstring_push);
- (void) SLclass_set_string_function (cl, bstring_string);
-
- if (-1 == SLclass_register_class (cl, SLANG_BSTRING_TYPE, sizeof (char *),
- SLANG_CLASS_TYPE_PTR))
- return -1;
-
- if ((-1 == SLclass_add_typecast (SLANG_BSTRING_TYPE, SLANG_STRING_TYPE, bstring_to_string, 1))
- || (-1 == SLclass_add_typecast (SLANG_STRING_TYPE, SLANG_BSTRING_TYPE, string_to_bstring, 1))
- || (-1 == SLclass_add_binary_op (SLANG_BSTRING_TYPE, SLANG_BSTRING_TYPE, bstring_bstring_bin_op, bstring_bstring_bin_op_result))
- || (-1 == SLclass_add_binary_op (SLANG_STRING_TYPE, SLANG_BSTRING_TYPE, string_bstring_bin_op, bstring_bstring_bin_op_result))
- || (-1 == SLclass_add_binary_op (SLANG_BSTRING_TYPE, SLANG_STRING_TYPE, bstring_string_bin_op, bstring_bstring_bin_op_result)))
-
- return -1;
-
- if (-1 == SLadd_intrin_fun_table (BString_Table, NULL))
- return -1;
-
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slclass.c b/mdk-stage1/slang/slclass.c
deleted file mode 100644
index 733888cb8..000000000
--- a/mdk-stage1/slang/slclass.c
+++ /dev/null
@@ -1,1391 +0,0 @@
-/* User defined objects */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-unsigned char _SLclass_Class_Type [256];
-#endif
-
-static SLang_Class_Type *Registered_Types[256];
-SLang_Class_Type *_SLclass_get_class (unsigned char type)
-{
- SLang_Class_Type *cl;
-
- cl = Registered_Types [type];
- if (cl == NULL)
- SLang_exit_error ("Application error: Type %d not registered", (int) type);
-
- return cl;
-}
-
-int SLclass_is_class_defined (unsigned char type)
-{
- return (NULL != Registered_Types[type]);
-}
-
-VOID_STAR _SLclass_get_ptr_to_value (SLang_Class_Type *cl,
- SLang_Object_Type *obj)
-{
- VOID_STAR p;
-
- switch (cl->cl_class_type)
- {
- case SLANG_CLASS_TYPE_MMT:
- case SLANG_CLASS_TYPE_PTR:
- case SLANG_CLASS_TYPE_SCALAR:
- p = (VOID_STAR) &obj->v;
- break;
-
- case SLANG_CLASS_TYPE_VECTOR:
- p = obj->v.ptr_val;
- break;
-
- default:
- p = NULL;
- }
- return p;
-}
-
-char *SLclass_get_datatype_name (unsigned char stype)
-{
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (stype);
- return cl->cl_name;
-}
-
-static int method_undefined_error (unsigned char type, char *method, char *name)
-{
- if (name == NULL) name = SLclass_get_datatype_name (type);
-
- SLang_verror (SL_TYPE_MISMATCH, "%s method not defined for %s",
- method, name);
- return -1;
-}
-
-static int
-scalar_vector_bin_op_result (int op, unsigned char a, unsigned char b,
- unsigned char *c)
-{
- (void) a; (void) b;
- switch (op)
- {
- case SLANG_NE:
- case SLANG_EQ:
- *c = SLANG_INT_TYPE;
- return 1;
- }
- return 0;
-}
-
-static int
-scalar_vector_bin_op (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- int *c;
- char *a, *b;
- unsigned int da, db;
- unsigned int n, n_max;
- unsigned int data_type_len;
- SLang_Class_Type *cl;
-
- (void) b_type;
- cl = _SLclass_get_class (a_type);
-
- data_type_len = cl->cl_sizeof_type;
-
- a = (char *) ap;
- b = (char *) bp;
- c = (int *) cp;
-
- if (na == 1) da = 0; else da = data_type_len;
- if (nb == 1) db = 0; else db = data_type_len;
- if (na > nb) n_max = na; else n_max = nb;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_NE:
- for (n = 0; n < n_max; n++)
- {
- c[n] = (0 != SLMEMCMP(a, b, data_type_len));
- a += da; b += db;
- }
- break;
-
- case SLANG_EQ:
- for (n = 0; n < n_max; n++)
- {
- c[n] = (0 == SLMEMCMP(a, b, data_type_len));
- a += da; b += db;
- }
- break;
- }
- return 1;
-}
-
-static int scalar_fread (unsigned char type, FILE *fp, VOID_STAR ptr,
- unsigned int desired, unsigned int *actual)
-{
- unsigned int n;
-
- n = fread ((char *) ptr, _SLclass_get_class (type)->cl_sizeof_type,
- desired, fp);
- *actual = n;
- return 0;
-}
-
-static int scalar_fwrite (unsigned char type, FILE *fp, VOID_STAR ptr,
- unsigned int desired, unsigned int *actual)
-{
- unsigned int n;
-
- n = fwrite ((char *) ptr, _SLclass_get_class (type)->cl_sizeof_type,
- desired, fp);
- *actual = n;
- return 0;
-}
-
-static int vector_apush (unsigned char type, VOID_STAR ptr)
-{
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
- return (*cl->cl_push)(type, (VOID_STAR) &ptr);
-}
-
-static int vector_apop (unsigned char type, VOID_STAR ptr)
-{
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
- return (*cl->cl_pop)(type, (VOID_STAR) &ptr);
-}
-
-static int default_push_mmt (unsigned char type_unused, VOID_STAR ptr)
-{
- SLang_MMT_Type *ref;
-
- (void) type_unused;
- ref = *(SLang_MMT_Type **) ptr;
- return SLang_push_mmt (ref);
-}
-
-static void default_destroy_simple (unsigned char type_unused, VOID_STAR ptr_unused)
-{
- (void) type_unused;
- (void) ptr_unused;
-}
-
-static void default_destroy_user (unsigned char type, VOID_STAR ptr)
-{
- (void) type;
- SLang_free_mmt (*(SLang_MMT_Type **) ptr);
-}
-
-static int default_pop (unsigned char type, VOID_STAR ptr)
-{
- return SLclass_pop_ptr_obj (type, (VOID_STAR *) ptr);
-}
-
-static int default_datatype_deref (unsigned char type)
-{
- return method_undefined_error (type, "datatype_deref", NULL);
-}
-
-static int default_acopy (unsigned char type, VOID_STAR from, VOID_STAR to)
-{
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
- if (-1 == (*cl->cl_apush) (type, from))
- return -1;
- return (*cl->cl_apop) (type, to);
-}
-
-static int default_dereference_object (unsigned char type, VOID_STAR ptr)
-{
- (void) ptr;
- return method_undefined_error (type, "dereference", NULL);
-}
-
-static char *default_string (unsigned char stype, VOID_STAR v)
-{
- char buf [256];
- char *s;
-#if SLANG_HAS_COMPLEX
- double *cplx;
-#endif
- s = buf;
-
- switch (stype)
- {
- case SLANG_STRING_TYPE:
- s = *(char **) v;
- break;
-
- case SLANG_NULL_TYPE:
- s = "NULL";
- break;
-
- case SLANG_DATATYPE_TYPE:
- s = SLclass_get_datatype_name ((unsigned char) *(int *)v);
- break;
-
-#if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- cplx = *(double **) v;
- if (cplx[1] < 0)
- sprintf (s, "(%g - %gi)", cplx [0], -cplx [1]);
- else
- sprintf (s, "(%g + %gi)", cplx [0], cplx [1]);
- break;
-#endif
- default:
- s = SLclass_get_datatype_name (stype);
- }
-
- return SLmake_string (s);
-}
-
-static int
-use_cmp_bin_op_result (int op, unsigned char a, unsigned char b,
- unsigned char *c)
-{
- if (a != b)
- return 0;
- switch (op)
- {
- case SLANG_NE:
- case SLANG_EQ:
- case SLANG_LT:
- case SLANG_LE:
- case SLANG_GT:
- case SLANG_GE:
- *c = SLANG_INT_TYPE;
- return 1;
- }
- return 0;
-}
-
-static int
-use_cmp_bin_op (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- int *c;
- char *a, *b;
- unsigned int da, db;
- unsigned int n, n_max;
- unsigned int data_type_len;
- SLang_Class_Type *cl;
- int (*cmp)(unsigned char, VOID_STAR, VOID_STAR, int *);
-
- (void) b_type;
- cl = _SLclass_get_class (a_type);
- cmp = cl->cl_cmp;
- data_type_len = cl->cl_sizeof_type;
-
- a = (char *) ap;
- b = (char *) bp;
- c = (int *) cp;
-
- if (na == 1) da = 0; else da = data_type_len;
- if (nb == 1) db = 0; else db = data_type_len;
- if (na > nb) n_max = na; else n_max = nb;
-
- switch (op)
- {
- int result;
-
- default:
- return 0;
-
- case SLANG_NE:
- for (n = 0; n < n_max; n++)
- {
- if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
- return -1;
- c[n] = (result != 0);
- a += da; b += db;
- }
- break;
-
- case SLANG_EQ:
- for (n = 0; n < n_max; n++)
- {
- if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
- return -1;
- c[n] = (result == 0);
- a += da; b += db;
- }
- break;
-
- case SLANG_GT:
- for (n = 0; n < n_max; n++)
- {
- if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
- return -1;
- c[n] = (result > 0);
- a += da; b += db;
- }
- break;
- case SLANG_GE:
- for (n = 0; n < n_max; n++)
- {
- if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
- return -1;
- c[n] = (result >= 0);
- a += da; b += db;
- }
- break;
- case SLANG_LT:
- for (n = 0; n < n_max; n++)
- {
- if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
- return -1;
- c[n] = (result < 0);
- a += da; b += db;
- }
- break;
- case SLANG_LE:
- for (n = 0; n < n_max; n++)
- {
- if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
- return -1;
- c[n] = (result <= 0);
- a += da; b += db;
- }
- break;
- }
- return 1;
-}
-
-
-int SLclass_get_class_id (SLang_Class_Type *cl)
-{
- if (cl == NULL)
- return -1;
- return (int) cl->cl_data_type;
-}
-
-SLang_Class_Type *SLclass_allocate_class (char *name)
-{
- SLang_Class_Type *cl;
- unsigned int i;
-
- for (i = 0; i < 256; i++)
- {
- cl = Registered_Types [i];
- if ((cl != NULL)
- && (0 == strcmp (cl->cl_name, name)))
- {
- SLang_verror (SL_DUPLICATE_DEFINITION, "Type name %s already exists", name);
- return NULL;
- }
- }
-
- cl = (SLang_Class_Type *) SLmalloc (sizeof (SLang_Class_Type));
- if (cl == NULL) return NULL;
-
- SLMEMSET ((char *) cl, 0, sizeof (SLang_Class_Type));
-
- if (NULL == (cl->cl_name = SLang_create_slstring (name)))
- {
- SLfree ((char *) cl);
- return NULL;
- }
-
- return cl;
-}
-
-static int DataType_Ids [256];
-
-int _SLang_push_datatype (unsigned char data_type)
-{
- /* This data type could be a copy of another type, e.g., short and
- * int if they are the same size (Int16 == Short). So, make sure
- * we push the original and not the copy.
- */
- data_type = _SLclass_get_class (data_type)->cl_data_type;
- return SLclass_push_int_obj (SLANG_DATATYPE_TYPE, (int) data_type);
-}
-
-static int datatype_deref (unsigned char type, VOID_STAR ptr)
-{
- SLang_Class_Type *cl;
- int status;
-
- /* The parser generated code for this as if a function call were to be
- * made. However, we are calling the deref object routine
- * instead of the function call. So, I must simulate the function call.
- */
- if (-1 == _SL_increment_frame_pointer ())
- return -1;
-
- type = (unsigned char) *(int *) ptr;
- cl = _SLclass_get_class (type);
- status = (*cl->cl_datatype_deref) (type);
-
- (void) _SL_decrement_frame_pointer ();
- return status;
-}
-
-static int datatype_push (unsigned char type_unused, VOID_STAR ptr)
-{
- (void) type_unused;
- return _SLang_push_datatype (*(int *) ptr);
-}
-
-int _SLang_pop_datatype (unsigned char *type)
-{
- int i;
-
- if (-1 == SLclass_pop_int_obj (SLANG_DATATYPE_TYPE, &i))
- return -1;
-
- *type = (unsigned char) i;
- return 0;
-}
-
-static int datatype_pop (unsigned char type, VOID_STAR ptr)
-{
- if (-1 == _SLang_pop_datatype (&type))
- return -1;
-
- *(int *) ptr = type;
- return 0;
-}
-
-int _SLclass_init (void)
-{
- SLang_Class_Type *cl;
-
- /* First initialize the container classes. This is so binary operations
- * added later will work with them.
- */
- if (-1 == _SLarray_init_slarray ())
- return -1;
-
- /* DataType_Type */
- if (NULL == (cl = SLclass_allocate_class ("DataType_Type")))
- return -1;
- cl->cl_pop = datatype_pop;
- cl->cl_push = datatype_push;
- cl->cl_dereference = datatype_deref;
- if (-1 == SLclass_register_class (cl, SLANG_DATATYPE_TYPE, sizeof(int),
- SLANG_CLASS_TYPE_SCALAR))
- return -1;
-
- return 0;
-}
-
-static int register_new_datatype (char *name, unsigned char type)
-{
- DataType_Ids [type] = type;
- return SLadd_intrinsic_variable (name, (VOID_STAR) (DataType_Ids + type),
- SLANG_DATATYPE_TYPE, 1);
-}
-
-int SLclass_create_synonym (char *name, unsigned char type)
-{
- if (NULL == _SLclass_get_class (type))
- return -1;
-
- return register_new_datatype (name, type);
-}
-
-int _SLclass_copy_class (unsigned char to, unsigned char from)
-{
- SLang_Class_Type *cl = _SLclass_get_class (from);
-
- if (Registered_Types[to] != NULL)
- SLang_exit_error ("Application error: Class already exists");
-
- Registered_Types[to] = cl;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (to != SLANG_UNDEFINED_TYPE)
- _SLclass_Class_Type [to] = cl->cl_class_type;
-#endif
- return 0;
-}
-
-int SLclass_register_class (SLang_Class_Type *cl, unsigned char type, unsigned int type_size, unsigned char class_type)
-{
- char *name;
- unsigned int i;
- int can_binop = 1; /* scalar_vector_bin_op should work
- * for all data types.
- */
-
- if (type == SLANG_VOID_TYPE) for (i = 0; i < 256; i++)
- {
- if ((Registered_Types[i] == NULL)
- && (i != SLANG_VOID_TYPE))
- {
- type = (unsigned char) i;
- break;
- }
- }
-
- if ((NULL != Registered_Types [type])
- || (type == SLANG_VOID_TYPE))
- {
- SLang_verror (SL_APPLICATION_ERROR, "Class type %d already in use", (int) type);
- return -1;
- }
-
- cl->cl_data_type = type;
- cl->cl_class_type = class_type;
- name = cl->cl_name;
-
- switch (class_type)
- {
- case SLANG_CLASS_TYPE_MMT:
- if (cl->cl_push == NULL) cl->cl_push = default_push_mmt;
- if (cl->cl_destroy == NULL)
- return method_undefined_error (type, "destroy", name);
- cl->cl_user_destroy_fun = cl->cl_destroy;
- cl->cl_destroy = default_destroy_user;
- type_size = sizeof (VOID_STAR);
- break;
-
- case SLANG_CLASS_TYPE_SCALAR:
- if (cl->cl_destroy == NULL) cl->cl_destroy = default_destroy_simple;
- if ((type_size == 0)
- || (type_size > sizeof (_SL_Object_Union_Type)))
- {
- SLang_verror (SL_INVALID_PARM,
- "Type size for %s not appropriate for SCALAR type",
- name);
- return -1;
- }
- if (cl->cl_pop == NULL)
- return method_undefined_error (type, "pop", name);
- if (cl->cl_fread == NULL) cl->cl_fread = scalar_fread;
- if (cl->cl_fwrite == NULL) cl->cl_fwrite = scalar_fwrite;
-
- can_binop = 1;
- break;
-
- case SLANG_CLASS_TYPE_PTR:
- if (cl->cl_destroy == NULL)
- return method_undefined_error (type, "destroy", name);
- type_size = sizeof (VOID_STAR);
- break;
-
- case SLANG_CLASS_TYPE_VECTOR:
- if (cl->cl_destroy == NULL)
- return method_undefined_error (type, "destroy", name);
- if (cl->cl_pop == NULL)
- return method_undefined_error (type, "pop", name);
- cl->cl_apop = vector_apop;
- cl->cl_apush = vector_apush;
- cl->cl_adestroy = default_destroy_simple;
- if (cl->cl_fread == NULL) cl->cl_fread = scalar_fread;
- if (cl->cl_fwrite == NULL) cl->cl_fwrite = scalar_fwrite;
- can_binop = 1;
- break;
-
- default:
- SLang_verror (SL_INVALID_PARM, "%s: unknown class type (%d)", name, class_type);
- return -1;
- }
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if (type != SLANG_UNDEFINED_TYPE)
- _SLclass_Class_Type [type] = class_type;
-#endif
-
- if (type_size == 0)
- {
- SLang_verror (SL_INVALID_PARM, "type size must be non-zero for %s", name);
- return -1;
- }
-
- if (cl->cl_string == NULL) cl->cl_string = default_string;
- if (cl->cl_acopy == NULL) cl->cl_acopy = default_acopy;
- if (cl->cl_datatype_deref == NULL) cl->cl_datatype_deref = default_datatype_deref;
-
- if (cl->cl_pop == NULL) cl->cl_pop = default_pop;
-
- if (cl->cl_push == NULL)
- return method_undefined_error (type, "push", name);
-
- if (cl->cl_byte_code_destroy == NULL)
- cl->cl_byte_code_destroy = cl->cl_destroy;
- if (cl->cl_push_literal == NULL)
- cl->cl_push_literal = cl->cl_push;
-
- if (cl->cl_dereference == NULL)
- cl->cl_dereference = default_dereference_object;
-
- if (cl->cl_apop == NULL) cl->cl_apop = cl->cl_pop;
- if (cl->cl_apush == NULL) cl->cl_apush = cl->cl_push;
- if (cl->cl_adestroy == NULL) cl->cl_adestroy = cl->cl_destroy;
- if (cl->cl_push_intrinsic == NULL) cl->cl_push_intrinsic = cl->cl_push;
-
- if ((cl->cl_foreach == NULL)
- || (cl->cl_foreach_open == NULL)
- || (cl->cl_foreach_close == NULL))
- {
- cl->cl_foreach = _SLarray_cl_foreach;
- cl->cl_foreach_open = _SLarray_cl_foreach_open;
- cl->cl_foreach_close = _SLarray_cl_foreach_close;
- }
-
- cl->cl_sizeof_type = type_size;
-
- if (NULL == (cl->cl_transfer_buf = (VOID_STAR) SLmalloc (type_size)))
- return -1;
-
- Registered_Types[type] = cl;
-
- if (-1 == register_new_datatype (name, type))
- return -1;
-
- if (cl->cl_cmp != NULL)
- {
- if (-1 == SLclass_add_binary_op (type, type, use_cmp_bin_op, use_cmp_bin_op_result))
- return -1;
- }
- else if (can_binop
- && (-1 == SLclass_add_binary_op (type, type, scalar_vector_bin_op, scalar_vector_bin_op_result)))
- return -1;
-
- cl->cl_anytype_typecast = _SLanytype_typecast;
-
- return 0;
-}
-
-int SLclass_add_math_op (unsigned char type,
- int (*handler)(int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR),
- int (*result) (int, unsigned char, unsigned char *))
-{
- SLang_Class_Type *cl = _SLclass_get_class (type);
-
- cl->cl_math_op = handler;
- cl->cl_math_op_result_type = result;
- return 0;
-}
-
-int SLclass_add_binary_op (unsigned char a, unsigned char b,
- int (*f) (int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR),
- int (*r) (int, unsigned char, unsigned char, unsigned char *))
-{
- SLang_Class_Type *cl;
- SL_OOBinary_Type *ab;
-
- if ((f == NULL) || (r == NULL))
- {
- SLang_verror (SL_INVALID_PARM, "SLclass_add_binary_op");
- return -1;
- }
-
- cl = _SLclass_get_class (a);
- (void) _SLclass_get_class (b);
-
- if (NULL == (ab = (SL_OOBinary_Type *) SLmalloc (sizeof(SL_OOBinary_Type))))
- return -1;
-
- ab->data_type = b;
- ab->binary_function = f;
- ab->binary_result = r;
- ab->next = cl->cl_binary_ops;
- cl->cl_binary_ops = ab;
-
- if ((a != SLANG_ARRAY_TYPE)
- && (b != SLANG_ARRAY_TYPE))
- {
- if ((-1 == _SLarray_add_bin_op (a))
- || (-1 == _SLarray_add_bin_op (b)))
- return -1;
- }
-
- return 0;
-}
-
-int SLclass_add_unary_op (unsigned char type,
- int (*f)(int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR),
- int (*r)(int, unsigned char, unsigned char *))
-{
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
- if ((f == NULL) || (r == NULL))
- {
- SLang_verror (SL_INVALID_PARM, "SLclass_add_unary_op");
- return -1;
- }
-
- cl->cl_unary_op = f;
- cl->cl_unary_op_result_type = r;
-
- return 0;
-}
-
-int SLclass_add_app_unary_op (unsigned char type,
- int (*f)(int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR),
- int (*r)(int, unsigned char, unsigned char *))
-{
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
- if ((f == NULL) || (r == NULL))
- {
- SLang_verror (SL_INVALID_PARM, "SLclass_add_app_unary_op");
- return -1;
- }
-
- cl->cl_app_unary_op = f;
- cl->cl_app_unary_op_result_type = r;
-
- return 0;
-}
-
-int SLclass_set_pop_function (SLang_Class_Type *cl, int (*f)(unsigned char, VOID_STAR))
-{
- if (cl == NULL) return -1;
- cl->cl_pop = f;
-
- return 0;
-}
-
-int SLclass_set_push_function (SLang_Class_Type *cl, int (*f)(unsigned char, VOID_STAR))
-{
- if (cl == NULL) return -1;
- cl->cl_push = f;
-
- return 0;
-}
-
-int SLclass_set_string_function (SLang_Class_Type *cl, char *(*f)(unsigned char, VOID_STAR))
-{
- if (cl == NULL) return -1;
-
- cl->cl_string = f;
- return 0;
-}
-
-int SLclass_set_destroy_function (SLang_Class_Type *cl, void (*f)(unsigned char, VOID_STAR))
-{
- if (cl == NULL) return -1;
-
- cl->cl_destroy = f;
- return 0;
-}
-
-int SLclass_set_sget_function (SLang_Class_Type *cl, int (*f)(unsigned char, char *))
-{
- if (cl == NULL) return -1;
- cl->cl_sget = f;
- return 0;
-}
-
-int SLclass_set_sput_function (SLang_Class_Type *cl, int (*f)(unsigned char, char *))
-{
- if (cl == NULL) return -1;
- cl->cl_sput = f;
- return 0;
-}
-
-int SLclass_set_aget_function (SLang_Class_Type *cl, int (*f)(unsigned char, unsigned int))
-{
- if (cl == NULL) return -1;
- cl->cl_aget = f;
- return 0;
-}
-
-int SLclass_set_aput_function (SLang_Class_Type *cl, int (*f)(unsigned char, unsigned int))
-{
- if (cl == NULL) return -1;
- cl->cl_aput = f;
- return 0;
-}
-
-int SLclass_set_anew_function (SLang_Class_Type *cl, int (*f)(unsigned char, unsigned int))
-{
- if (cl == NULL) return -1;
- cl->cl_anew = f;
- return 0;
-}
-
-/* Misc */
-void _SLclass_type_mismatch_error (unsigned char a, unsigned char b)
-{
- SLang_verror (SL_TYPE_MISMATCH, "Expecting %s, found %s",
- SLclass_get_datatype_name (a),
- SLclass_get_datatype_name (b));
-}
-
-/* */
-
-static int null_binary_fun (int op,
- unsigned char a, VOID_STAR ap, unsigned int na,
- unsigned char b, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- int *ic;
- unsigned int i;
- int c;
-
- (void) ap; (void) bp;
-
- switch (op)
- {
- case SLANG_EQ:
- c = (a == b);
- break;
-
- case SLANG_NE:
- c = (a != b);
- break;
-
- default:
- return 0;
- }
-
- if (na > nb) nb = na;
- ic = (int *) cp;
- for (i = 0; i < nb; i++)
- ic[i] = c;
-
- return 1;
-}
-
-static char *get_binary_op_string (int op)
-{
- static char *ops[SLANG_MOD] =
- {
- "+", "=", "*", "/", "==", "!=", ">", ">=", "<", "<=", "^",
- "or", "and", "&", "|", "xor", "shl", "shr", "mod"
- };
-
- if ((op > SLANG_MOD) || (op <= 0))
- return "??";
- return ops[op - 1];
-}
-
-int (*_SLclass_get_binary_fun (int op,
- SLang_Class_Type *a_cl, SLang_Class_Type *b_cl,
- SLang_Class_Type **c_cl, int do_error))
-(int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR)
-{
- SL_OOBinary_Type *bt;
- unsigned char a, b, c;
-
- a = a_cl->cl_data_type;
- b = b_cl->cl_data_type;
-
- if ((a == SLANG_NULL_TYPE) || (b == SLANG_NULL_TYPE))
- {
- *c_cl = _SLclass_get_class (SLANG_INT_TYPE);
- return null_binary_fun;
- }
-
- bt = a_cl->cl_binary_ops;
-
- while (bt != NULL)
- {
- if (bt->data_type == b)
- {
- if (1 != (*bt->binary_result)(op, a, b, &c))
- break;
-
- if (c == a) *c_cl = a_cl;
- else if (c == b) *c_cl = b_cl;
- else *c_cl = _SLclass_get_class (c);
-
- return bt->binary_function;
- }
-
- bt = bt->next;
- }
-
- if (do_error)
- SLang_verror (SL_TYPE_MISMATCH, "%s %s %s is not possible",
- a_cl->cl_name, get_binary_op_string (op), b_cl->cl_name);
-
- *c_cl = NULL;
- return NULL;
-}
-
-int (*_SLclass_get_unary_fun (int op,
- SLang_Class_Type *a_cl,
- SLang_Class_Type **b_cl,
- int utype))
-(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR)
-{
- int (*f)(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
- int (*r)(int, unsigned char, unsigned char *);
- unsigned char a;
- unsigned char b;
-
- switch (utype)
- {
- case _SLANG_BC_UNARY:
- f = a_cl->cl_unary_op;
- r = a_cl->cl_unary_op_result_type;
- break;
-
- case _SLANG_BC_MATH_UNARY:
- f = a_cl->cl_math_op;
- r = a_cl->cl_math_op_result_type;
- break;
-
- case _SLANG_BC_APP_UNARY:
- f = a_cl->cl_app_unary_op;
- r = a_cl->cl_app_unary_op_result_type;
- break;
-
- default:
- f = NULL;
- r = NULL;
- }
-
- a = a_cl->cl_data_type;
- if ((f != NULL) && (r != NULL) && (1 == (*r) (op, a, &b)))
- {
- if (a == b)
- *b_cl = a_cl;
- else
- *b_cl = _SLclass_get_class (b);
- return f;
- }
-
- SLang_verror (SL_TYPE_MISMATCH, "undefined unary operation/function on %s",
- a_cl->cl_name);
-
- *b_cl = NULL;
-
- return NULL;
-}
-
-int
-SLclass_typecast (unsigned char to_type, int is_implicit, int allow_array)
-{
- unsigned char from_type;
- SLang_Class_Type *cl_to, *cl_from;
- SLang_Object_Type obj;
- VOID_STAR ap;
- VOID_STAR bp;
- int status;
-
- if (-1 == SLang_pop (&obj))
- return -1;
-
- from_type = obj.data_type;
- if (from_type == to_type)
- {
- SLang_push (&obj);
- return 0;
- }
-
- cl_from = _SLclass_get_class (from_type);
-
- /* Since the typecast functions are designed to work on arrays,
- * get the pointer to the value instead of just &obj.v.
- */
- ap = _SLclass_get_ptr_to_value (cl_from, &obj);
-
- if ((from_type == SLANG_ARRAY_TYPE)
- && (allow_array || (to_type != SLANG_ANY_TYPE)))
- {
- if (allow_array == 0)
- goto return_error;
-
- cl_to = _SLclass_get_class (SLANG_ARRAY_TYPE);
- bp = cl_to->cl_transfer_buf;
- status = _SLarray_typecast (from_type, ap, 1, to_type, bp, is_implicit);
- }
- else
- {
- int (*t) (unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR);
-
- if (NULL == (t = _SLclass_get_typecast (from_type, to_type, is_implicit)))
- {
- SLang_free_object (&obj);
- return -1;
- }
-
- cl_to = _SLclass_get_class (to_type);
- bp = cl_to->cl_transfer_buf;
- status = (*t) (from_type, ap, 1, to_type, bp);
- }
-
- if (1 == status)
- {
- if (-1 == (*cl_to->cl_apush)(to_type, bp))
- {
- (*cl_to->cl_adestroy) (to_type, bp);
- SLang_free_object (&obj);
- return -1;
- }
-
- /* cl_apush will push a copy, so destry this one */
- (*cl_to->cl_adestroy) (to_type, bp);
- SLang_free_object (&obj);
- return 0;
- }
-
- return_error:
-
- SLang_verror (SL_TYPE_MISMATCH, "Unable to typecast %s to %s",
- cl_from->cl_name,
- SLclass_get_datatype_name (to_type));
- SLang_free_object (&obj);
- return -1;
-}
-
-int (*_SLclass_get_typecast (unsigned char from, unsigned char to, int is_implicit))
-(unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR)
-{
- SL_Typecast_Type *t;
- SLang_Class_Type *cl_from;
-
- cl_from = _SLclass_get_class (from);
-
- t = cl_from->cl_typecast_funs;
- while (t != NULL)
- {
- if (t->data_type != to)
- {
- t = t->next;
- continue;
- }
-
- if (is_implicit && (t->allow_implicit == 0))
- break;
-
- return t->typecast;
- }
-
- if (to == SLANG_ANY_TYPE)
- return _SLanytype_typecast;
-
- if ((is_implicit == 0)
- && (cl_from->cl_void_typecast != NULL))
- return cl_from->cl_void_typecast;
-
- SLang_verror (SL_TYPE_MISMATCH, "Unable to typecast %s to %s",
- cl_from->cl_name,
- SLclass_get_datatype_name (to));
-
- return NULL;
-}
-
-int
-SLclass_add_typecast (unsigned char from, unsigned char to,
- int (*f)_PROTO((unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR)),
- int allow_implicit)
-{
- SL_Typecast_Type *t;
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (from);
- if (to == SLANG_VOID_TYPE)
- {
- cl->cl_void_typecast = f;
- return 0;
- }
-
- (void) _SLclass_get_class (to);
-
- if (NULL == (t = (SL_Typecast_Type *) SLmalloc (sizeof (SL_Typecast_Type))))
- return -1;
-
- SLMEMSET((char *) t, 0, sizeof(SL_Typecast_Type));
- t->data_type = to;
- t->next = cl->cl_typecast_funs;
- t->typecast = f;
- t->allow_implicit = allow_implicit;
-
- cl->cl_typecast_funs = t;
-
- return 0;
-}
-
-SLang_MMT_Type *SLang_pop_mmt (unsigned char type) /*{{{*/
-{
- SLang_MMT_Type *mmt;
-
- if (-1 == SLclass_pop_ptr_obj (type, (VOID_STAR *) &mmt))
- mmt = NULL;
- return mmt;
-
-#if 0
- SLang_Object_Type obj;
- SLang_Class_Type *cl;
-
- if (_SLang_pop_object_of_type (type, &obj))
- return NULL;
-
- cl = _SLclass_get_class (type);
- if ((cl->cl_class_type == SLANG_CLASS_TYPE_MMT)
- && (obj.data_type == type))
- {
- return obj.v.ref;
- }
-
- _SLclass_type_mismatch_error (type, obj.data_type);
- SLang_free_object (&obj);
- return NULL;
-#endif
-}
-
-/*}}}*/
-
-int SLang_push_mmt (SLang_MMT_Type *ref) /*{{{*/
-{
- if (ref == NULL)
- return SLang_push_null ();
-
- ref->count += 1;
-
- if (0 == SLclass_push_ptr_obj (ref->data_type, (VOID_STAR) ref))
- return 0;
-
- ref->count -= 1;
- return -1;
-}
-
-/*}}}*/
-
-void SLang_inc_mmt (SLang_MMT_Type *ref)
-{
- if (ref != NULL)
- ref->count += 1;
-}
-
-VOID_STAR SLang_object_from_mmt (SLang_MMT_Type *ref)
-{
- if (ref == NULL)
- return NULL;
-
- return ref->user_data;
-}
-
-SLang_MMT_Type *SLang_create_mmt (unsigned char t, VOID_STAR p)
-{
- SLang_MMT_Type *ref;
-
- (void) _SLclass_get_class (t); /* check to see if it is registered */
-
- if (NULL == (ref = (SLang_MMT_Type *) SLmalloc (sizeof (SLang_MMT_Type))))
- return NULL;
-
- SLMEMSET ((char *) ref, 0, sizeof (SLang_MMT_Type));
-
- ref->data_type = t;
- ref->user_data = p;
- /* FIXME!! To be consistent with other types, the reference count should
- * be set to 1 here. However, doing so will require other code changes
- * involving the use of MMTs. For instance, SLang_free_mmt would have
- * to be called after every push of the MMT.
- */
- return ref;
-}
-
-void SLang_free_mmt (SLang_MMT_Type *ref)
-{
- unsigned char type;
- SLang_Class_Type *cl;
-
- if (ref == NULL)
- return;
-
- /* This can be zero if SLang_create_mmt is called followed
- * by this routine before anything gets a chance to attach itself
- * to it.
- */
- if (ref->count > 1)
- {
- ref->count -= 1;
- return;
- }
-
- type = ref->data_type;
- cl = _SLclass_get_class (type);
- (*cl->cl_user_destroy_fun) (type, ref->user_data);
- SLfree ((char *)ref);
-}
-
-int SLang_push_value (unsigned char type, VOID_STAR v)
-{
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
- return (*cl->cl_apush)(type, v);
-}
-
-int SLang_pop_value (unsigned char type, VOID_STAR v)
-{
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
- return (*cl->cl_apop)(type, v);
-}
-
-void SLang_free_value (unsigned char type, VOID_STAR v)
-{
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
- (*cl->cl_adestroy) (type, v);
-}
-
-/* These routines are very low-level and are designed for application data
- * types to access the stack from their push/pop methods. The int and
- * pointer versions are in slang.c
- */
-#if SLANG_HAS_FLOAT
-int SLclass_push_double_obj (unsigned char type, double x)
-{
- SLang_Object_Type obj;
- obj.data_type = type;
- obj.v.double_val = x;
- return SLang_push (&obj);
-}
-int SLclass_push_float_obj (unsigned char type, float x)
-{
- SLang_Object_Type obj;
- obj.data_type = type;
- obj.v.float_val = x;
- return SLang_push (&obj);
-}
-
-#endif
-
-int SLclass_push_long_obj (unsigned char type, long x)
-{
- SLang_Object_Type obj;
- obj.data_type = type;
- obj.v.long_val = x;
- return SLang_push (&obj);
-}
-
-int SLclass_push_short_obj (unsigned char type, short x)
-{
- SLang_Object_Type obj;
- obj.data_type = type;
- obj.v.short_val = x;
- return SLang_push (&obj);
-}
-
-int SLclass_push_char_obj (unsigned char type, char x)
-{
- SLang_Object_Type obj;
- obj.data_type = type;
- obj.v.char_val = x;
- return SLang_push (&obj);
-}
-
-#if SLANG_HAS_FLOAT
-int SLclass_pop_double_obj (unsigned char type, double *x)
-{
- SLang_Object_Type obj;
-
- if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
- return -1;
-
- *x = obj.v.double_val;
- return 0;
-}
-
-int SLclass_pop_float_obj (unsigned char type, float *x)
-{
- SLang_Object_Type obj;
-
- if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
- return -1;
-
- *x = obj.v.float_val;
- return 0;
-}
-#endif
-
-int SLclass_pop_long_obj (unsigned char type, long *x)
-{
- SLang_Object_Type obj;
-
- if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
- return -1;
-
- *x = obj.v.long_val;
- return 0;
-}
-
-int SLclass_pop_int_obj (unsigned char type, int *x)
-{
- SLang_Object_Type obj;
-
- if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
- return -1;
-
- *x = obj.v.int_val;
- return 0;
-}
-
-int SLclass_pop_short_obj (unsigned char type, short *x)
-{
- SLang_Object_Type obj;
-
- if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
- return -1;
-
- *x = obj.v.short_val;
- return 0;
-}
-
-int SLclass_pop_char_obj (unsigned char type, char *x)
-{
- SLang_Object_Type obj;
-
- if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
- return -1;
-
- *x = obj.v.char_val;
- return 0;
-}
-
-int SLclass_pop_ptr_obj (unsigned char type, VOID_STAR *s)
-{
- SLang_Object_Type obj;
-
- if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
- {
- *s = (VOID_STAR) NULL;
- return -1;
- }
- *s = obj.v.ptr_val;
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slcmd.c b/mdk-stage1/slang/slcmd.c
deleted file mode 100644
index 4a00a90fc..000000000
--- a/mdk-stage1/slang/slcmd.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/* cmd line facility for slang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifndef HAVE_STDLIB_H
-/* Oh dear. Where is the prototype for atof? If not in stdlib, then
- * I do not know where. Not in math.h onsome systems either.
- */
-extern double atof ();
-#endif
-
-static SLcmd_Cmd_Type *SLcmd_find_command (char *s, SLcmd_Cmd_Type *cmd)
-{
- char *cmdstr;
- char chs = *s++, ch;
-
- while ((cmd->cmdfun != NULL)
- && (NULL != (cmdstr = cmd->cmd))
- && (0 != (ch = *cmdstr++)))
- {
- if ((ch == chs) && !strcmp (s, cmdstr)) return cmd;
- cmd++;
- }
- return NULL;
-}
-
-static int extract_token (char **strptr, char *buf)
-{
- char *s, *b;
- char ch, quote;
-
- *buf = 0;
-
- s = *strptr;
- while (((ch = *s) != 0)
- && ((ch == ' ') || (ch == '\t') || (ch == '\n')))
- s++;
-
- *strptr = s;
-
- if (ch == 0) return 0;
- if (ch == '%') return 0;
-
- b = buf;
-
- *b++ = ch;
- s++;
-
- if ((ch == '\'') || (ch == '"'))
- {
- quote = ch;
- while ((ch = *s) != 0)
- {
- s++;
- *b++ = ch;
- if (ch == quote)
- break;
-
- if (ch == '\\')
- {
- if (0 == (ch = *s))
- break;
- *b++ = ch;
- s++;
- }
- }
- *strptr = s;
- *b = 0;
- return 1;
- }
-
- while (((ch = *s) != 0)
- && (ch != ' ')
- && (ch != '\t')
- && (ch != '\n')
- && (ch != '%'))
- *b++ = *s++;
-
- *strptr = s;
- *b = 0;
- return 1;
-}
-
-static int allocate_arg_space (SLcmd_Cmd_Table_Type *table, int argc, unsigned int *space_ptr)
-{
- unsigned int space = *space_ptr;
- char *p;
-
- if (argc + 1 < (int) space)
- return 0;
-
- if (space > 128)
- {
- if (space > 1024) space += 1024;
- else space += 128;
- }
- else space += 32;
-
- if (NULL == (p = SLrealloc ((char *)table->string_args, space * sizeof (char *))))
- return -1;
- table->string_args = (char **)p;
- table->string_args [argc] = NULL;
-
- if (NULL == (p = SLrealloc ((char *)table->int_args, space * sizeof (int))))
- return -1;
- table->int_args = (int *)p;
-
- if (NULL == (p = SLrealloc ((char *)table->double_args, space * sizeof (double))))
- return -1;
- table->double_args = (double *)p;
-
- if (NULL == (p = SLrealloc ((char *)table->arg_type, space * sizeof (unsigned char))))
- return -1;
- table->arg_type = (unsigned char *)p;
-
- *space_ptr = space;
- return 0;
-}
-
-int SLcmd_execute_string (char *str, SLcmd_Cmd_Table_Type *table)
-{
- char *s, *b = NULL, *arg_type, *last_str, *cmd_name;
- SLcmd_Cmd_Type *cmd;
- char *buf;
- int token_present;
- int i;
- int status;
- unsigned int len;
- int argc;
- unsigned int space;
-
- table->argc = 0;
- table->string_args = NULL;
- table->int_args = NULL;
- table->double_args = NULL;
- table->arg_type = NULL;
-
- buf = SLmake_string (str);
- if (buf == NULL)
- return -1;
-
- status = extract_token (&str, buf);
- if (status <= 0)
- {
- SLfree (buf);
- return status;
- }
-
- if (((len = strlen (buf)) >= 32)
- || (NULL == (cmd = SLcmd_find_command (buf, table->table))))
- {
- SLang_verror (SL_UNDEFINED_NAME,"%s: invalid command", buf);
- SLfree (buf);
- return -1;
- }
-
- if (NULL == (cmd_name = SLmake_string (buf)))
- {
- SLfree (buf);
- return -1;
- }
-
- space = 0;
- argc = 0;
- if (-1 == allocate_arg_space (table, argc, &space))
- {
- SLfree (buf);
- return -1;
- }
- table->arg_type[argc] = SLANG_STRING_TYPE;
- table->string_args[argc++] = cmd_name;
-
- arg_type = cmd->arg_type;
- status = -1;
- while (*arg_type)
- {
- int guess_type = 0;
-
- last_str = str;
-
- if (-1 == allocate_arg_space (table, argc, &space))
- goto error;
-
- if (-1 == (token_present = extract_token (&str, buf)))
- goto error;
-
- table->string_args[argc] = NULL;
-
- if (token_present)
- {
- b = buf;
- len = strlen (b);
-
- if ((*b == '"') && (len > 1))
- {
- b++;
- len -= 2;
- b[len] = 0;
- guess_type = SLANG_STRING_TYPE;
- SLexpand_escaped_string (buf, b, b + len);
- len = strlen (buf);
- }
- else if ((*b == '\'') && (len > 1))
- {
- char ch;
- b++;
- len -= 2;
- b[len] = 0;
- guess_type = SLANG_INT_TYPE;
- ch = *b;
- if (ch == '\\')
- (void) _SLexpand_escaped_char (b, &ch);
- sprintf (buf, "%d", (unsigned char) ch);
- len = strlen (buf);
- }
- else guess_type = SLang_guess_type (buf);
- }
-
- switch (*arg_type++)
- {
- /* variable argument number */
- case 'v':
- if (token_present == 0) break;
- case 'V':
- if (token_present == 0)
- {
- SLang_verror (SL_INVALID_PARM, "%s: Expecting argument", cmd_name);
- goto error;
- }
-
- while (*last_str == ' ') last_str++;
- len = strlen (last_str);
- str = last_str + len;
-
- s = SLmake_nstring (last_str, len);
- if (s == NULL) goto error;
-
- table->arg_type[argc] = SLANG_STRING_TYPE;
- table->string_args[argc++] = s;
- break;
-
- case 's':
- if (token_present == 0) break;
- case 'S':
- if (token_present == 0)
- {
- SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting string argument", cmd_name);
- goto error;
- }
-
- s = SLmake_nstring (buf, len);
- if (s == NULL) goto error;
- table->arg_type[argc] = SLANG_STRING_TYPE;
- table->string_args[argc++] = s;
- break;
-
- /* integer argument */
- case 'i':
- if (token_present == 0) break;
- case 'I':
- if ((token_present == 0) || (SLANG_INT_TYPE != guess_type))
- {
- SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting integer argument", cmd_name);
- goto error;
- }
-
- table->arg_type[argc] = SLANG_INT_TYPE;
- table->int_args[argc++] = SLatoi((unsigned char *) buf);
- break;
-
- /* floating point arg */
-#if SLANG_HAS_FLOAT
- case 'f':
- if (token_present == 0) break;
- case 'F':
- if ((token_present == 0) || (SLANG_STRING_TYPE == guess_type))
- {
- SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting double argument", cmd_name);
- goto error;
- }
- table->arg_type[argc] = SLANG_DOUBLE_TYPE;
- table->double_args[argc++] = atof(buf);
- break;
-#endif
- /* Generic type */
- case 'g':
- if (token_present == 0) break;
- case 'G':
- if (token_present == 0)
- {
- SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting argument", cmd_name);
- goto error;
- }
-
- switch (guess_type)
- {
- case SLANG_INT_TYPE:
- table->arg_type[argc] = SLANG_INT_TYPE;
- table->int_args[argc++] = SLatoi((unsigned char *) buf);
- break;
-
- case SLANG_STRING_TYPE:
- s = SLmake_nstring (buf, len);
- if (s == NULL) goto error;
-
- table->arg_type[argc] = SLANG_STRING_TYPE;
- table->string_args[argc++] = s;
- break;
-#if SLANG_HAS_FLOAT
- case SLANG_DOUBLE_TYPE:
- table->arg_type[argc] = SLANG_DOUBLE_TYPE;
- table->double_args[argc++] = atof(buf);
-#endif
- }
- break;
- }
- }
-
- /* call function */
- status = (*cmd->cmdfun)(argc, table);
-
- error:
- if (table->string_args != NULL) for (i = 0; i < argc; i++)
- {
- if (NULL != table->string_args[i])
- {
- SLfree (table->string_args[i]);
- table->string_args[i] = NULL;
- }
- }
- SLfree ((char *)table->string_args); table->string_args = NULL;
- SLfree ((char *)table->double_args); table->double_args = NULL;
- SLfree ((char *)table->int_args); table->int_args = NULL;
- SLfree ((char *)table->arg_type); table->arg_type = NULL;
-
- SLfree (buf);
- return status;
-}
-
diff --git a/mdk-stage1/slang/slcmplex.c b/mdk-stage1/slang/slcmplex.c
deleted file mode 100644
index b210dfc04..000000000
--- a/mdk-stage1/slang/slcmplex.c
+++ /dev/null
@@ -1,1142 +0,0 @@
-/* Complex Data Type definition for S-Lang */
-/* Copyright (c) 1997, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* The rest of the file is enclosed in this #if */
-#if SLANG_HAS_COMPLEX
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#ifdef PI
-# undef PI
-#endif
-#define PI 3.14159265358979323846
-
-int SLang_pop_complex (double *r, double *i)
-{
- double *c;
-
- switch (SLang_peek_at_stack ())
- {
- case SLANG_COMPLEX_TYPE:
- if (-1 == SLclass_pop_ptr_obj (SLANG_COMPLEX_TYPE, (VOID_STAR *)&c))
- return -1;
- *r = c[0];
- *i = c[1];
- SLfree ((char *) c);
- break;
-
- default:
- *i = 0.0;
- if (-1 == SLang_pop_double (r, NULL, NULL))
- return -1;
- break;
-
- case -1:
- return -1;
- }
- return 0;
-}
-
-int SLang_push_complex (double r, double i)
-{
- double *c;
-
- c = (double *) SLmalloc (2 * sizeof (double));
- if (c == NULL)
- return -1;
-
- c[0] = r;
- c[1] = i;
-
- if (-1 == SLclass_push_ptr_obj (SLANG_COMPLEX_TYPE, (VOID_STAR) c))
- {
- SLfree ((char *) c);
- return -1;
- }
- return 0;
-}
-
-double *SLcomplex_times (double *c, double *a, double *b)
-{
- double a_real, b_real, a_imag, b_imag;
-
- a_real = a[0];
- b_real = b[0];
- a_imag = a[1];
- b_imag = b[1];
-
- c[0] = a_real * b_real - a_imag * b_imag;
- c[1] = a_imag * b_real + a_real * b_imag;
-
- return c;
-}
-
-double *SLcomplex_divide (double *c, double *a, double *b)
-{
- double a_real, b_real, a_imag, b_imag;
- double ratio, invden;
-
- a_real = a[0];
- b_real = b[0];
- a_imag = a[1];
- b_imag = b[1];
-
- /* Do it this way to avoid overflow in the denom */
- if (fabs(b_real) > fabs(b_imag))
- {
- ratio = b_imag / b_real;
- invden = 1.0 / (b_real + b_imag * ratio);
- c[0] = (a_real + ratio * a_imag) * invden;
- c[1] = (a_imag - a_real * ratio) * invden;
- }
- else
- {
- ratio = b_real / b_imag;
- invden = 1.0 / (b_real * ratio + b_imag);
- c[0] = (a_real * ratio + a_imag) * invden;
- c[1] = (a_imag * ratio - a_real) * invden;
- }
- return c;
-}
-
-/* a^b = exp (b log a); */
-double *SLcomplex_pow (double *c, double *a, double *b)
-{
- return SLcomplex_exp (c, SLcomplex_times (c, b, SLcomplex_log (c, a)));
-}
-
-static double *complex_dpow (double *c, double *a, double b)
-{
- SLcomplex_log (c, a);
- c[0] *= b;
- c[1] *= b;
- return SLcomplex_exp (c, c);
-}
-
-static double *dcomplex_pow (double *c, double a, double *b)
-{
- a = log (a);
- c[0] = a * b[0];
- c[1] = a * b[1];
- return SLcomplex_exp (c, c);
-}
-
-double SLcomplex_abs (double *z)
-{
- return SLmath_hypot (z[0], z[1]);
-}
-
-/* It appears that FORTRAN assumes that the branch cut for the log function
- * is along the -x axis. So, use this for atan2:
- */
-static double my_atan2 (double y, double x)
-{
- double val;
-
- val = atan (y/x);
-
- if (x >= 0)
- return val; /* I, IV */
-
- if (y <= 0) /* III */
- return val - PI;
-
- return PI + val; /* II */
-}
-
-static void polar_form (double *r, double *theta, double *z)
-{
- double x, y;
-
- *r = SLcomplex_abs (z);
-
- x = z[0];
- y = z[1];
-
- if (x == 0.0)
- {
- if (y >= 0)
- *theta = 0.5 * PI;
- else
- *theta = 1.5 * PI;
- }
- else *theta = my_atan2 (y, x);
-}
-
-double *SLcomplex_sin (double *sinz, double *z)
-{
- double x, y;
-
- x = z[0]; y = z[1];
- sinz[0] = sin (x) * cosh (y);
- sinz[1] = cos (x) * sinh (y);
- return sinz;
-}
-
-double *SLcomplex_cos (double *cosz, double *z)
-{
- double x, y;
-
- x = z[0]; y = z[1];
- cosz[0] = cos (x) * cosh (y);
- cosz[1] = -sin (x) * sinh (y);
- return cosz;
-}
-
-double *SLcomplex_exp (double *expz, double *z)
-{
- double r, i;
-
- r = exp (z[0]);
- i = z[1];
- expz[0] = r * cos (i);
- expz[1] = r * sin (i);
- return expz;
-}
-
-double *SLcomplex_log (double *logz, double *z)
-{
- double r, theta;
-
- polar_form (&r, &theta, z); /* log R.e^(ix) = log R + ix */
- logz[0] = log(r);
- logz[1] = theta;
- return logz;
-}
-
-double *SLcomplex_log10 (double *log10z, double *z)
-{
- double l10 = log (10.0);
- (void) SLcomplex_log (log10z, z);
- log10z[0] = log10z[0] / l10;
- log10z[1] = log10z[1] / l10;
- return log10z;
-}
-
-double *SLcomplex_sqrt (double *sqrtz, double *z)
-{
- double r, x, y;
-
- x = z[0];
- y = z[1];
-
- r = SLmath_hypot (x, y);
-
- if (r == 0.0)
- {
- sqrtz [0] = sqrtz [1] = 0.0;
- return sqrtz;
- }
-
- if (x >= 0.0)
- {
- x = sqrt (0.5 * (r + x));
- y = 0.5 * y / x;
- }
- else
- {
- r = sqrt (0.5 * (r - x));
- x = 0.5 * y / r;
- y = r;
-
- if (x < 0.0)
- {
- x = -x;
- y = -y;
- }
- }
-
- sqrtz[0] = x;
- sqrtz[1] = y;
-
- return sqrtz;
-}
-
-double *SLcomplex_tan (double *tanz, double *z)
-{
- double x, y, invden;
-
- x = 2 * z[0];
- y = 2 * z[1];
- invden = 1.0 / (cos (x) + cosh (y));
- tanz[0] = invden * sin (x);
- tanz[1] = invden * sinh (y);
- return tanz;
-}
-
-/* Utility Function */
-static void compute_alpha_beta (double *z, double *alpha, double *beta)
-{
- double x, y, a, b;
-
- x = z[0];
- y = z[1];
- a = 0.5 * SLmath_hypot (x + 1, y);
- b = 0.5 * SLmath_hypot (x - 1, y);
-
- *alpha = a + b;
- *beta = a - b;
-}
-
-double *SLcomplex_asin (double *asinz, double *z)
-{
- double alpha, beta;
-
- compute_alpha_beta (z, &alpha, &beta);
- asinz[0] = asin (beta);
- asinz[1] = log (alpha + sqrt (alpha * alpha - 1));
- return asinz;
-}
-
-double *SLcomplex_acos (double *acosz, double *z)
-{
- double alpha, beta;
-
- compute_alpha_beta (z, &alpha, &beta);
- acosz[0] = acos (beta);
- acosz[1] = -log (alpha + sqrt (alpha * alpha - 1));
- return acosz;
-}
-
-double *SLcomplex_atan (double *atanz, double *z)
-{
- double x, y;
- double z1[2], z2[2];
-
- x = z[0]; y = z[1];
- z1[0] = x;
- z1[1] = 1 + y;
- z2[0] = -x;
- z2[1] = 1 - y;
-
- SLcomplex_log (z1, SLcomplex_divide (z2, z1, z2));
- atanz[0] = -0.5 * z1[1];
- atanz[1] = 0.5 * z1[0];
-
- return atanz;
-}
-
-double *SLcomplex_sinh (double *sinhz, double *z)
-{
- double x, y;
- x = z[0]; y = z[1];
- sinhz[0] = sinh (x) * cos (y);
- sinhz[1] = cosh (x) * sin (y);
- return sinhz;
-}
-
-double *SLcomplex_cosh (double *coshz, double *z)
-{
- double x, y;
- x = z[0]; y = z[1];
- coshz[0] = cosh (x) * cos (y);
- coshz[1] = sinh (x) * sin (y);
- return coshz;
-}
-
-double *SLcomplex_tanh (double *tanhz, double *z)
-{
- double x, y, invden;
- x = 2 * z[0];
- y = 2 * z[1];
- invden = 1.0 / (cosh (x) + cos (y));
- tanhz[0] = invden * sinh (x);
- tanhz[1] = invden * sin (y);
- return tanhz;
-}
-#if 0
-static double *not_implemented (char *fun, double *p)
-{
- SLang_verror (SL_NOT_IMPLEMENTED, "%s for complex numbers has not been implemented",
- fun);
- *p = -1.0;
- return p;
-}
-#endif
-/* Use: asinh(z) = -i asin(iz) */
-double *SLcomplex_asinh (double *asinhz, double *z)
-{
- double iz[2];
-
- iz[0] = -z[1];
- iz[1] = z[0];
-
- (void) SLcomplex_asin (iz, iz);
- asinhz[0] = iz[1];
- asinhz[1] = -iz[0];
-
- return asinhz;
-}
-
-/* Use: acosh (z) = i acos(z) */
-double *SLcomplex_acosh (double *acoshz, double *z)
-{
- double iz[2];
-
- (void) SLcomplex_acos (iz, z);
- acoshz[0] = -iz[1];
- acoshz[1] = iz[0];
-
- return acoshz;
-}
-
-/* Use: atanh(z) = -i atan(iz) */
-double *SLcomplex_atanh (double *atanhz, double *z)
-{
- double iz[2];
-
- iz[0] = -z[1];
- iz[1] = z[0];
-
- (void) SLcomplex_atan (iz, iz);
- atanhz[0] = iz[1];
- atanhz[1] = -iz[0];
-
- return atanhz;
-}
-
-static int complex_binary_result (int op, unsigned char a, unsigned char b,
- unsigned char *c)
-{
- (void) a; (void) b;
-
- switch (op)
- {
- default:
- case SLANG_POW:
- case SLANG_PLUS:
- case SLANG_MINUS:
- case SLANG_TIMES:
- case SLANG_DIVIDE:
- *c = SLANG_COMPLEX_TYPE;
- break;
-
- case SLANG_EQ:
- case SLANG_NE:
- *c = SLANG_CHAR_TYPE;
- break;
- }
- return 1;
-}
-
-static int complex_complex_binary (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- char *ic;
- double *a, *b, *c;
- unsigned int n, n_max;
- unsigned int da, db;
-
- (void) a_type;
- (void) b_type;
-
- a = (double *) ap;
- b = (double *) bp;
- c = (double *) cp;
- ic = (char *) cp;
-
- if (na == 1) da = 0; else da = 2;
- if (nb == 1) db = 0; else db = 2;
-
- if (na > nb) n_max = na; else n_max = nb;
- n_max = 2 * n_max;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_PLUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = a[0] + b[0];
- c[n + 1] = a[1] + b[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_MINUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = a[0] - b[0];
- c[n + 1] = a[1] - b[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_TIMES:
- for (n = 0; n < n_max; n += 2)
- {
- SLcomplex_times (c + n, a, b);
- a += da; b += db;
- }
- break;
-
- case SLANG_DIVIDE: /* / */
- for (n = 0; n < n_max; n += 2)
- {
- if ((b[0] == 0.0) && (b[1] == 0.0))
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- SLcomplex_divide (c + n, a, b);
- a += da; b += db;
- }
- break;
-
- case SLANG_EQ: /* == */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((a[0] == b[0]) && (a[1] == b[1]));
- a += da; b += db;
- }
- break;
-
- case SLANG_NE: /* != */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((a[0] != b[0]) || (a[1] != b[1]));
- a += da; b += db;
- }
- break;
-
- case SLANG_POW:
- for (n = 0; n < n_max; n += 2)
- {
- SLcomplex_pow (c + n, a, b);
- a += da; b += db;
- }
- break;
-
- }
-
- return 1;
-}
-
-static int complex_double_binary (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- char *ic;
- double *a, *b, *c;
- unsigned int n, n_max;
- unsigned int da, db;
-
- (void) a_type;
- (void) b_type;
-
- a = (double *) ap;
- b = (double *) bp;
- c = (double *) cp;
- ic = (char *) cp;
-
- if (na == 1) da = 0; else da = 2;
- if (nb == 1) db = 0; else db = 1;
-
- if (na > nb) n_max = na; else n_max = nb;
- n_max = 2 * n_max;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_PLUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = a[0] + b[0];
- c[n + 1] = a[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_MINUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = a[0] - b[0];
- c[n + 1] = a[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_TIMES:
- for (n = 0; n < n_max; n += 2)
- {
- double b0 = b[0];
- c[n] = a[0] * b0;
- c[n + 1] = a[1] * b0;
- a += da; b += db;
- }
- break;
-
- case SLANG_DIVIDE: /* / */
- for (n = 0; n < n_max; n += 2)
- {
- double b0 = b[0];
- if (b0 == 0.0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- c[n] = a[0] / b0;
- c[n + 1] = a[1] / b0;
- a += da; b += db;
- }
- break;
-
- case SLANG_EQ: /* == */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((a[0] == b[0]) && (a[1] == 0.0));
- a += da; b += db;
- }
- break;
-
- case SLANG_NE: /* != */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((a[0] != b[0]) || (a[1] != 0.0));
- a += da; b += db;
- }
- break;
-
- case SLANG_POW:
- for (n = 0; n < n_max; n += 2)
- {
- complex_dpow (c + n, a, b[0]);
- a += da; b += db;
- }
- break;
- }
-
- return 1;
-}
-
-static int double_complex_binary (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- char *ic;
- double *a, *b, *c;
- unsigned int n, n_max;
- unsigned int da, db;
-
- (void) a_type;
- (void) b_type;
-
- a = (double *) ap;
- b = (double *) bp;
- c = (double *) cp;
- ic = (char *) cp;
-
- if (na == 1) da = 0; else da = 1;
- if (nb == 1) db = 0; else db = 2;
-
- if (na > nb) n_max = na; else n_max = nb;
- n_max = 2 * n_max;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_PLUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = a[0] + b[0];
- c[n + 1] = b[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_MINUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = a[0] - b[0];
- c[n + 1] = -b[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_TIMES:
- for (n = 0; n < n_max; n += 2)
- {
- double a0 = a[0];
- c[n] = a0 * b[0];
- c[n + 1] = a0 * b[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_DIVIDE: /* / */
- for (n = 0; n < n_max; n += 2)
- {
- double z[2];
- if ((b[0] == 0.0) && (b[1] == 0.0))
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- z[0] = a[0];
- z[1] = 0.0;
- SLcomplex_divide (c + n, z, b);
- a += da; b += db;
- }
- break;
-
- case SLANG_EQ: /* == */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((a[0] == b[0]) && (0.0 == b[1]));
- a += da; b += db;
- }
- break;
-
- case SLANG_NE: /* != */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((a[0] != b[0]) || (0.0 != b[1]));
- a += da; b += db;
- }
- break;
-
- case SLANG_POW:
- for (n = 0; n < n_max; n += 2)
- {
- dcomplex_pow (c + n, a[0], b);
- a += da; b += db;
- }
- break;
- }
-
- return 1;
-}
-
-static int complex_generic_binary (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- char *ic;
- char *b;
- double *a, *c;
- unsigned int n, n_max;
- unsigned int da, db;
- unsigned int sizeof_b;
- SLang_To_Double_Fun_Type to_double;
-
- if (NULL == (to_double = SLarith_get_to_double_fun (b_type, &sizeof_b)))
- return 0;
-
- (void) a_type;
-
- a = (double *) ap;
- b = (char *) bp;
- c = (double *) cp;
- ic = (char *) cp;
-
- if (na == 1) da = 0; else da = 2;
- if (nb == 1) db = 0; else db = sizeof_b;
-
- if (na > nb) n_max = na; else n_max = nb;
- n_max = 2 * n_max;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_POW:
- for (n = 0; n < n_max; n += 2)
- {
- complex_dpow (c + n, a, to_double((VOID_STAR)b));
- a += da; b += db;
- }
- break;
-
- case SLANG_PLUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = a[0] + to_double((VOID_STAR)b);
- c[n + 1] = a[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_MINUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = a[0] - to_double((VOID_STAR)b);
- c[n + 1] = a[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_TIMES:
- for (n = 0; n < n_max; n += 2)
- {
- double b0 = to_double((VOID_STAR)b);
- c[n] = a[0] * b0;
- c[n + 1] = a[1] * b0;
- a += da; b += db;
- }
- break;
-
- case SLANG_DIVIDE: /* / */
- for (n = 0; n < n_max; n += 2)
- {
- double b0 = to_double((VOID_STAR)b);
- if (b0 == 0)
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- c[n] = a[0] / b0;
- c[n + 1] = a[1] / b0;
- a += da; b += db;
- }
- break;
-
- case SLANG_EQ: /* == */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((a[0] == to_double((VOID_STAR)b)) && (a[1] == 0.0));
- a += da; b += db;
- }
- break;
-
- case SLANG_NE: /* != */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((a[0] != to_double((VOID_STAR)b)) || (a[1] != 0.0));
- a += da; b += db;
- }
- break;
- }
-
- return 1;
-}
-
-static int generic_complex_binary (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- double *b, *c;
- char *a, *ic;
- unsigned int n, n_max;
- unsigned int da, db;
- unsigned int sizeof_a;
- SLang_To_Double_Fun_Type to_double;
-
- if (NULL == (to_double = SLarith_get_to_double_fun (a_type, &sizeof_a)))
- return 0;
-
- (void) b_type;
-
- a = (char *) ap;
- b = (double *) bp;
- c = (double *) cp;
- ic = (char *) cp;
-
- if (na == 1) da = 0; else da = sizeof_a;
- if (nb == 1) db = 0; else db = 2;
-
- if (na > nb) n_max = na; else n_max = nb;
- n_max = 2 * n_max;
-
- switch (op)
- {
- default:
- return 0;
- case SLANG_POW:
- for (n = 0; n < n_max; n += 2)
- {
- dcomplex_pow (c + n, to_double((VOID_STAR)a), b);
- a += da; b += db;
- }
- break;
-
- case SLANG_PLUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = to_double((VOID_STAR)a) + b[0];
- c[n + 1] = b[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_MINUS:
- for (n = 0; n < n_max; n += 2)
- {
- c[n] = to_double((VOID_STAR)a) - b[0];
- c[n + 1] = -b[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_TIMES:
- for (n = 0; n < n_max; n += 2)
- {
- double a0 = to_double((VOID_STAR)a);
- c[n] = a0 * b[0];
- c[n + 1] = a0 * b[1];
- a += da; b += db;
- }
- break;
-
- case SLANG_DIVIDE: /* / */
- for (n = 0; n < n_max; n += 2)
- {
- double z[2];
- if ((b[0] == 0.0) && (b[1] == 0.0))
- {
- SLang_Error = SL_DIVIDE_ERROR;
- return -1;
- }
- z[0] = to_double((VOID_STAR)a);
- z[1] = 0.0;
- SLcomplex_divide (c + n, z, b);
- a += da; b += db;
- }
- break;
-
- case SLANG_EQ: /* == */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((to_double((VOID_STAR)a) == b[0]) && (0.0 == b[1]));
- a += da; b += db;
- }
- break;
-
- case SLANG_NE: /* != */
- for (n = 0; n < n_max; n += 2)
- {
- ic[n/2] = ((to_double((VOID_STAR)a) != b[0]) || (0.0 != b[1]));
- a += da; b += db;
- }
- break;
- }
-
- return 1;
-}
-
-static int complex_unary_result (int op, unsigned char a, unsigned char *b)
-{
- (void) a;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_PLUSPLUS:
- case SLANG_MINUSMINUS:
- case SLANG_CHS:
- case SLANG_MUL2:
- *b = SLANG_COMPLEX_TYPE;
- break;
-
- case SLANG_SQR: /* |Real|^2 + |Imag|^2 ==> double */
- case SLANG_ABS: /* |z| ==> double */
- *b = SLANG_DOUBLE_TYPE;
- break;
-
- case SLANG_SIGN:
- *b = SLANG_INT_TYPE;
- break;
- }
- return 1;
-}
-
-static int complex_unary (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- VOID_STAR bp)
-{
- unsigned int n;
- double *a, *b;
- int *ic;
-
- (void) a_type;
-
- a = (double *) ap;
- b = (double *) bp;
- ic = (int *) bp;
-
- na = 2 * na;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_PLUSPLUS:
- for (n = 0; n < na; n += 2) b[n] = (a[n] + 1);
- break;
- case SLANG_MINUSMINUS:
- for (n = 0; n < na; n += 2) b[n] = (a[n] - 1);
- break;
- case SLANG_CHS:
- for (n = 0; n < na; n += 2)
- {
- b[n] = -(a[n]);
- b[n + 1] = -(a[n + 1]);
- }
- break;
- case SLANG_SQR: /* |Real|^2 + |Imag|^2 ==> double */
- for (n = 0; n < na; n += 2)
- b[n/2] = (a[n] * a[n] + a[n + 1] * a[n + 1]);
- break;
-
- case SLANG_MUL2:
- for (n = 0; n < na; n += 2)
- {
- b[n] = (2 * a[n]);
- b[n + 1] = (2 * a[n + 1]);
- }
- break;
-
- case SLANG_ABS: /* |z| ==> double */
- for (n = 0; n < na; n += 2)
- b[n/2] = SLcomplex_abs (a + n);
- break;
-
- case SLANG_SIGN:
- /* Another creative extension. Lets return an integer which indicates
- * whether the complex number is in the upperhalf plane or not.
- */
- for (n = 0; n < na; n += 2)
- {
- if (a[n + 1] < 0.0) ic[n/2] = -1;
- else if (a[n + 1] > 0.0) ic[n/2] = 1;
- else ic[n/2] = 0;
- }
- break;
- }
-
- return 1;
-}
-
-static int
-complex_typecast (unsigned char from_type, VOID_STAR from, unsigned int num,
- unsigned char to_type, VOID_STAR to)
-{
- double *z;
- double *d;
- char *i;
- unsigned int n;
- unsigned int sizeof_i;
- SLang_To_Double_Fun_Type to_double;
-
- (void) to_type;
-
- z = (double *) to;
-
- switch (from_type)
- {
- default:
- if (NULL == (to_double = SLarith_get_to_double_fun (from_type, &sizeof_i)))
- return 0;
- i = (char *) from;
- for (n = 0; n < num; n++)
- {
- *z++ = to_double ((VOID_STAR) i);
- *z++ = 0.0;
-
- i += sizeof_i;
- }
- break;
-
- case SLANG_DOUBLE_TYPE:
- d = (double *) from;
- for (n = 0; n < num; n++)
- {
- *z++ = d[n];
- *z++ = 0.0;
- }
- break;
- }
-
- return 1;
-}
-
-static void complex_destroy (unsigned char type, VOID_STAR ptr)
-{
- (void) type;
- SLfree ((char *)*(double **) ptr);
-}
-
-static int complex_push (unsigned char type, VOID_STAR ptr)
-{
- double *z;
-
- (void) type;
- z = *(double **) ptr;
- return SLang_push_complex (z[0], z[1]);
-}
-
-static int complex_pop (unsigned char type, VOID_STAR ptr)
-{
- double *z;
-
- (void) type;
- z = *(double **) ptr;
- return SLang_pop_complex (&z[0], &z[1]);
-}
-
-int _SLinit_slcomplex (void)
-{
- SLang_Class_Type *cl;
- unsigned char *types;
-
- if (NULL == (cl = SLclass_allocate_class ("Complex_Type")))
- return -1;
-
- (void) SLclass_set_destroy_function (cl, complex_destroy);
- (void) SLclass_set_push_function (cl, complex_push);
- (void) SLclass_set_pop_function (cl, complex_pop);
-
- if (-1 == SLclass_register_class (cl, SLANG_COMPLEX_TYPE, 2 * sizeof (double),
- SLANG_CLASS_TYPE_VECTOR))
- return -1;
-
- types = _SLarith_Arith_Types;
- while (*types != SLANG_DOUBLE_TYPE)
- {
- unsigned char t = *types++;
-
- if ((-1 == SLclass_add_binary_op (t, SLANG_COMPLEX_TYPE, generic_complex_binary, complex_binary_result))
- || (-1 == SLclass_add_binary_op (SLANG_COMPLEX_TYPE, t, complex_generic_binary, complex_binary_result))
- || (-1 == (SLclass_add_typecast (t, SLANG_COMPLEX_TYPE, complex_typecast, 1))))
- return -1;
- }
-
- if ((-1 == (SLclass_add_binary_op (SLANG_COMPLEX_TYPE, SLANG_COMPLEX_TYPE, complex_complex_binary, complex_binary_result)))
- || (-1 == (SLclass_add_binary_op (SLANG_COMPLEX_TYPE, SLANG_DOUBLE_TYPE, complex_double_binary, complex_binary_result)))
- || (-1 == (SLclass_add_binary_op (SLANG_DOUBLE_TYPE, SLANG_COMPLEX_TYPE, double_complex_binary, complex_binary_result)))
- || (-1 == (SLclass_add_unary_op (SLANG_COMPLEX_TYPE, complex_unary, complex_unary_result)))
- || (-1 == (SLclass_add_typecast (SLANG_DOUBLE_TYPE, SLANG_COMPLEX_TYPE, complex_typecast, 1))))
- return -1;
-
- return 0;
-}
-
-#endif /* if SLANG_HAS_COMPLEX */
-
diff --git a/mdk-stage1/slang/slcompat.c b/mdk-stage1/slang/slcompat.c
deleted file mode 100644
index 5aa122483..000000000
--- a/mdk-stage1/slang/slcompat.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* These functions are provided for backward compatibility and are obsolete.
- * Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Compatibility */
-int SLang_init_slunix (void)
-{
- if ((-1 == SLang_init_posix_dir ())
- || (-1 == SLang_init_posix_process ())
- || (-1 == SLdefine_for_ifdef ("__SLUNIX__")))
- return -1;
-
- return 0;
-}
-
-int SLang_init_slfile (void)
-{
- if ((-1 == SLang_init_stdio ())
- || (-1 == SLang_init_posix_dir ())
- || (-1 == SLdefine_for_ifdef("__SLFILE__")))
- return -1;
-
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slcurses.c b/mdk-stage1/slang/slcurses.c
deleted file mode 100644
index f1212afc8..000000000
--- a/mdk-stage1/slang/slcurses.c
+++ /dev/null
@@ -1,972 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <signal.h>
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-#include "slcurses.h"
-
-/* This file is meant to implement a primitive curses implementation in
- * terms of SLsmg calls. The fact is that the interfaces are sufficiently
- * different that a 100% emulation is not possible.
- */
-
-SLcurses_Window_Type *SLcurses_Stdscr;
-int SLcurses_Esc_Delay = 150; /* 0.15 seconds */
-SLtt_Char_Type SLcurses_Acs_Map [128];
-int SLcurses_Is_Endwin = 1;
-int SLcurses_Num_Colors = 8;
-
-static void blank_line (SLsmg_Char_Type *b, unsigned int len, SLsmg_Char_Type color)
-{
- SLsmg_Char_Type *bmax;
-
- bmax = b + len;
- color = SLSMG_BUILD_CHAR(' ', color);
-
- while (b < bmax) *b++ = color;
-}
-
-static int va_mvprintw (SLcurses_Window_Type *w, int r, int c, int do_move,
- char *fmt, va_list ap)
-{
- char buf[1024];
-
- if (do_move) SLcurses_wmove (w, r, c);
-
- (void) _SLvsnprintf (buf, sizeof(buf), fmt, ap);
-
- SLcurses_waddnstr (w, buf, -1);
- return 0;
-}
-
-int SLcurses_mvprintw (int r, int c, char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- va_mvprintw (SLcurses_Stdscr, r, c, 1, fmt, ap);
- va_end(ap);
-
- return 0;
-}
-
-int SLcurses_mvwprintw (SLcurses_Window_Type *w, int r, int c, char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- va_mvprintw (w, r, c, 1, fmt, ap);
- va_end(ap);
-
- return 0;
-}
-
-int SLcurses_wprintw (SLcurses_Window_Type *w, char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- va_mvprintw (w, 0, 0, 0, fmt, ap);
- va_end(ap);
-
- return 0;
-}
-
-int SLcurses_printw (char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- va_mvprintw (SLcurses_Stdscr, 0, 0, 0, fmt, ap);
- va_end(ap);
-
- return 0;
-}
-
-int SLcurses_nil (void)
-{
- return 0;
-}
-
-int SLcurses_has_colors(void)
-{
- return SLtt_Use_Ansi_Colors;
-}
-
-int SLcurses_nodelay (SLcurses_Window_Type *w, int onoff)
-{
- w->delay_off = (onoff ? 0 : -1);
- return 0;
-}
-
-int SLcurses_wgetch (SLcurses_Window_Type *w)
-{
- if (w == NULL)
- return ERR;
-
- SLcurses_wrefresh (w);
-
- if ((w->delay_off == -1) ||
- SLang_input_pending (w->delay_off))
- {
- if (w->use_keypad)
- {
- int ch = SLang_getkey ();
- if (ch == '\033')
- {
- if (0 == SLang_input_pending (ESCDELAY / 100))
- return ch;
- }
- else if (ch == 0xFFFF) return ERR;
- SLang_ungetkey (ch);
- return SLkp_getkey ();
- }
- return SLang_getkey ();
- }
-
- return ERR;
-}
-
-int SLcurses_getch (void)
-{
- return SLcurses_wgetch (SLcurses_Stdscr);
-}
-
-/* This is a super hack. That fact is that SLsmg and curses
- * are incompatible.
- */
-static unsigned char Color_Objects[256];
-
-static unsigned int map_attr_to_object (SLtt_Char_Type attr)
-{
- unsigned int obj;
- SLtt_Char_Type at;
-
- obj = (attr >> 8) & 0xFF;
-
- if (SLtt_Use_Ansi_Colors)
- {
- if (Color_Objects[obj] != 0) return obj;
-
- at = SLtt_get_color_object (obj & 0xF);
-
- if (attr & A_BOLD) at |= SLTT_BOLD_MASK;
- if (attr & A_UNDERLINE) at |= SLTT_ULINE_MASK;
- if (attr & A_REVERSE) at |= SLTT_REV_MASK;
-
- SLtt_set_color_object (obj, at);
-
- Color_Objects[obj] = 1;
- }
- else obj = obj & 0xF0;
-
- return obj;
-
-}
-
-int SLcurses_start_color (void)
-{
- int f, b;
- int obj;
-
- if (SLtt_Use_Ansi_Colors == 0) return -1;
-
- obj = 0;
- for (f = 0; f < 16; f++)
- {
- for (b = 0; b < 16; b++)
- {
- obj++;
- SLtt_set_color_fgbg (obj, f, b);
- }
- }
- return 0;
-}
-
-#ifdef SIGINT
-static void sigint_handler (int sig)
-{
- SLang_reset_tty ();
- SLsmg_reset_smg ();
- exit (sig);
-}
-#endif
-
-/* Values are assumed to be 0, 1, 2. This fact is exploited */
-static int TTY_State;
-
-static int init_tty (int suspend_ok)
-{
- if (-1 == SLang_init_tty (-1, 1, 0))
- return -1;
-
-#ifdef REAL_UNIX_SYSTEM
- if (suspend_ok) SLtty_set_suspend_state (1);
-#endif
- return 0;
-}
-
-int SLcurses_raw (void)
-{
- TTY_State = 1;
- return init_tty (0);
-}
-
-int SLcurses_cbreak (void)
-{
- TTY_State = 2;
- return init_tty (1);
-}
-
-#if defined(SIGTSTP) && defined(SIGSTOP)
-static void sigtstp_handler (int sig)
-{
- sig = errno;
-
- SLsmg_suspend_smg ();
-
- if (TTY_State)
- SLang_reset_tty ();
-
- kill(getpid(),SIGSTOP);
-
- SLsmg_resume_smg ();
-
- if (TTY_State) init_tty (TTY_State - 1);
-
- signal (SIGTSTP, sigtstp_handler);
- errno = sig;
-}
-#endif
-
-SLcurses_Window_Type *SLcurses_initscr (void)
-{
- SLcurses_Is_Endwin = 0;
- SLsmg_Newline_Behavior = SLSMG_NEWLINE_MOVES;
- SLtt_get_terminfo ();
-
-#if !defined(IBMPC_SYSTEM) && !defined(VMS)
- if (-1 == (SLcurses_Num_Colors = SLtt_tgetnum ("Co")))
-#endif
- SLcurses_Num_Colors = 8;
-
- if ((-1 == SLkp_init ())
- || (-1 == SLcurses_cbreak ())
- || (NULL == (SLcurses_Stdscr = SLcurses_newwin (0, 0, 0, 0)))
- || (-1 == SLsmg_init_smg ()))
- {
- SLang_doerror (NULL);
- SLang_exit_error ("SLcurses_initscr: init failed\n");
- return NULL;
- }
-
-#ifdef SIGINT
- signal (SIGINT, sigint_handler);
-#endif
-
-#if defined(SIGTSTP) && defined(SIGSTOP)
- signal (SIGTSTP, sigtstp_handler);
-#endif
-
- SLtt_set_mono (A_BOLD >> 8, NULL, SLTT_BOLD_MASK);
- SLtt_set_mono (A_UNDERLINE >> 8, NULL, SLTT_ULINE_MASK);
- SLtt_set_mono (A_REVERSE >> 8, NULL, SLTT_REV_MASK);
- /* SLtt_set_mono (A_BLINK >> 8, NULL, SLTT_BLINK_MASK); */
- SLtt_set_mono ((A_BOLD|A_UNDERLINE) >> 8, NULL, SLTT_ULINE_MASK|SLTT_BOLD_MASK);
- SLtt_set_mono ((A_REVERSE|A_UNDERLINE) >> 8, NULL, SLTT_ULINE_MASK|SLTT_REV_MASK);
-
- if (SLtt_Has_Alt_Charset)
- {
- SLcurses_Acs_Map[SLSMG_ULCORN_CHAR] = SLSMG_ULCORN_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_URCORN_CHAR] = SLSMG_URCORN_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_LLCORN_CHAR] = SLSMG_LLCORN_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_LRCORN_CHAR] = SLSMG_LRCORN_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_UTEE_CHAR] = SLSMG_UTEE_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_DTEE_CHAR] = SLSMG_DTEE_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_LTEE_CHAR] = SLSMG_LTEE_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_RTEE_CHAR] = SLSMG_RTEE_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_VLINE_CHAR] = SLSMG_VLINE_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_HLINE_CHAR] = SLSMG_HLINE_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_PLUS_CHAR] = SLSMG_PLUS_CHAR | A_ALTCHARSET;
- SLcurses_Acs_Map[SLSMG_CKBRD_CHAR] = SLSMG_CKBRD_CHAR | A_ALTCHARSET;
- }
- else
- {
- /* ugly defaults to use on terminals which don't support graphics */
- SLcurses_Acs_Map[SLSMG_ULCORN_CHAR] = '+';
- SLcurses_Acs_Map[SLSMG_URCORN_CHAR] = '+';
- SLcurses_Acs_Map[SLSMG_LLCORN_CHAR] = '+';
- SLcurses_Acs_Map[SLSMG_LRCORN_CHAR] = '+';
- SLcurses_Acs_Map[SLSMG_UTEE_CHAR] = '+';
- SLcurses_Acs_Map[SLSMG_DTEE_CHAR] = '+';
- SLcurses_Acs_Map[SLSMG_LTEE_CHAR] = '+';
- SLcurses_Acs_Map[SLSMG_RTEE_CHAR] = '+';
- SLcurses_Acs_Map[SLSMG_VLINE_CHAR] = '|';
- SLcurses_Acs_Map[SLSMG_HLINE_CHAR] = '-';
- SLcurses_Acs_Map[SLSMG_PLUS_CHAR] = '+';
- SLcurses_Acs_Map[SLSMG_CKBRD_CHAR] = '#';
- }
-
- return SLcurses_Stdscr;
-}
-
-int SLcurses_wattrset (SLcurses_Window_Type *w, SLtt_Char_Type ch)
-{
- unsigned int obj;
-
- obj = map_attr_to_object (ch);
- w->color = obj;
- w->attr = ch;
- return 0;
-}
-
-int SLcurses_wattroff (SLcurses_Window_Type *w, SLtt_Char_Type ch)
-{
- if (SLtt_Use_Ansi_Colors)
- return SLcurses_wattrset (w, 0);
-
- w->attr &= ~ch;
- return SLcurses_wattrset (w, w->attr);
-}
-
-int SLcurses_wattron (SLcurses_Window_Type *w, SLtt_Char_Type ch)
-{
- if (SLtt_Use_Ansi_Colors)
- return SLcurses_wattrset (w, ch);
-
- w->attr |= ch;
- return SLcurses_wattrset (w, w->attr);
-}
-
-int SLcurses_delwin (SLcurses_Window_Type *w)
-{
- if (w == NULL) return 0;
- if (w->lines != NULL)
- {
- SLsmg_Char_Type **lines = w->lines;
- if (w->is_subwin == 0)
- {
- unsigned int r, rmax;
-
- rmax = w->nrows;
- for (r = 0; r < rmax; r++)
- {
- SLfree ((char *)lines[r]);
- }
- }
-
- SLfree ((char *)lines);
- }
-
- SLfree ((char *)w);
- if (w == SLcurses_Stdscr)
- SLcurses_Stdscr = NULL;
- return 0;
-}
-
-SLcurses_Window_Type *SLcurses_newwin (unsigned int nrows, unsigned int ncols,
- unsigned int r, unsigned int c)
-{
- SLcurses_Window_Type *win;
- SLsmg_Char_Type **lines;
-
- if (r >= (unsigned int) SLtt_Screen_Rows)
- return NULL;
- if (c >= (unsigned int) SLtt_Screen_Cols)
- return NULL;
-
- if (NULL == (win = (SLcurses_Window_Type *) SLmalloc (sizeof (SLcurses_Window_Type))))
- return NULL;
-
- SLMEMSET ((char *) win, 0, sizeof (SLcurses_Window_Type));
-
- if (nrows == 0)
- nrows = (unsigned int) SLtt_Screen_Rows - r;
- if (ncols == 0)
- ncols = (unsigned int) SLtt_Screen_Cols - c;
-
- lines = (SLsmg_Char_Type **) SLmalloc (nrows * sizeof (SLsmg_Char_Type *));
- if (lines == NULL)
- {
- SLcurses_delwin (win);
- return NULL;
- }
-
- SLMEMSET ((char *) lines, 0, nrows * sizeof (SLsmg_Char_Type *));
-
- win->lines = lines;
- win->scroll_max = win->nrows = nrows;
- win->ncols = ncols;
- win->_begy = r;
- win->_begx = c;
- win->_maxx = (c + ncols) - 1;
- win->_maxy = (r + nrows) - 1;
- win->modified = 1;
- win->delay_off = -1;
-
- for (r = 0; r < nrows; r++)
- {
- SLsmg_Char_Type *b;
-
- b = (SLsmg_Char_Type *) SLmalloc (ncols * sizeof (SLsmg_Char_Type));
- if (b == NULL)
- {
- SLcurses_delwin (win);
- return NULL;
- }
- lines [r] = b;
- blank_line (b, ncols, 0);
- }
-
- return win;
-}
-
-int SLcurses_wmove (SLcurses_Window_Type *win, unsigned int r, unsigned int c)
-{
- if (win == NULL) return -1;
- win->_cury = r;
- win->_curx = c;
- win->modified = 1;
- return 0;
-}
-
-static int do_newline (SLcurses_Window_Type *w)
-{
- w->_curx = 0;
- w->_cury += 1;
- if (w->_cury >= w->scroll_max)
- {
- w->_cury = w->scroll_max - 1;
- if (w->scroll_ok)
- SLcurses_wscrl (w, 1);
- }
-
- return 0;
-}
-
-int SLcurses_waddch (SLcurses_Window_Type *win, SLtt_Char_Type attr)
-{
- SLsmg_Char_Type *b, ch;
- SLsmg_Char_Type color;
-
- if (win == NULL) return -1;
-
- if (win->_cury >= win->nrows)
- {
- /* Curses seems to move current postion to top of window. */
- win->_cury = win->_curx = 0;
- return -1;
- }
-
- win->modified = 1;
-
- ch = SLSMG_EXTRACT_CHAR(attr);
-
- if (attr == ch)
- color = win->color;
- else
- {
- /* hack to pick up the default color for graphics chars */
- if (((attr & A_COLOR) == 0) && ((attr & A_ALTCHARSET) != 0))
- {
- /* FIXME: priority=medium: Use SLSMG_?? instead of << */
- attr |= win->color << 8;
- }
- color = map_attr_to_object (attr);
- }
-
- if (ch < ' ')
- {
- if (ch == '\n')
- {
- SLcurses_wclrtoeol (win);
- return do_newline (win);
- }
-
- if (ch == '\r')
- {
- win->_curx = 0;
- return 0;
- }
-
- if (ch == '\b')
- {
- if (win->_curx > 0)
- win->_curx--;
-
- return 0;
- }
-
- /* HACK HACK!!!! */
- if (ch == '\t') ch = ' ';
- }
-
- if (win->_curx >= win->ncols)
- do_newline (win);
-
- b = win->lines[win->_cury] + win->_curx;
- *b = SLSMG_BUILD_CHAR(ch,color);
- win->_curx++;
-
- return 0;
-}
-
-int SLcurses_wnoutrefresh (SLcurses_Window_Type *w)
-{
- unsigned int len;
- unsigned int r, c;
- unsigned int i, imax;
-
- if (SLcurses_Is_Endwin)
- {
- if (TTY_State) init_tty (TTY_State - 1);
- SLsmg_resume_smg ();
- SLcurses_Is_Endwin = 0;
- }
-
- if (w == NULL)
- {
- SLsmg_refresh ();
- return -1;
- }
-
- if (w->modified == 0)
- return 0;
-
- r = w->_begy;
- c = w->_begx;
-
- len = w->ncols;
- imax = w->nrows;
-
- for (i = 0; i < imax; i++)
- {
- SLsmg_gotorc (r, c);
- SLsmg_write_color_chars (w->lines[i], len);
- r++;
- }
-
- if (w->has_box)
- SLsmg_draw_box(w->_begy, w->_begx, w->nrows, w->ncols);
-
- SLsmg_gotorc (w->_begy + w->_cury, w->_begx + w->_curx);
- w->modified = 0;
- return 0;
-}
-
-int SLcurses_wrefresh (SLcurses_Window_Type *w)
-{
- if (w == NULL)
- return -1;
-
- if (w->modified == 0)
- return 0;
-
- SLcurses_wnoutrefresh (w);
- SLsmg_refresh ();
- return 0;
-}
-
-int SLcurses_wclrtoeol (SLcurses_Window_Type *w)
-{
- SLsmg_Char_Type *b, *bmax;
- SLsmg_Char_Type blank;
-
- if (w == NULL) return -1;
- if (w->_cury >= w->nrows)
- return 0;
-
- w->modified = 1;
-
- blank = SLSMG_BUILD_CHAR(' ',w->color);
-
- b = w->lines[w->_cury];
- bmax = b + w->ncols;
- b += w->_curx;
-
- while (b < bmax) *b++ = blank;
- return 0;
-}
-
-int SLcurses_wclrtobot (SLcurses_Window_Type *w)
-{
- SLsmg_Char_Type *b, *bmax;
- SLsmg_Char_Type blank;
- unsigned int r;
-
- if (w == NULL) return -1;
-
- w->modified = 1;
- blank = SLSMG_BUILD_CHAR(' ',w->color);
- SLcurses_wclrtoeol (w);
- for (r = w->_cury + 1; r < w->nrows; r++)
- {
- b = w->lines [r];
- bmax = b + w->ncols;
-
- while (b < bmax) *b++ = blank;
- }
-
- return 0;
-}
-
-int SLcurses_wscrl (SLcurses_Window_Type *w, int n)
-{
- SLsmg_Char_Type **lines;
- unsigned int r, rmax, rmin, ncols;
- SLsmg_Char_Type color;
-
- if ((w == NULL) || (w->scroll_ok == 0))
- return -1;
-
- w->modified = 1;
-#if 0
- if (w->is_subwin)
- {
- SLang_reset_tty ();
- SLsmg_reset_smg ();
- fprintf (stderr, "\rAttempt to scroll a subwindow\n");
- exit (1);
- }
-#endif
-
- color = w->color;
- ncols = w->ncols;
- lines = w->lines;
- rmax = w->scroll_max;
- rmin = w->scroll_min;
- if (rmax > w->nrows)
- rmax = w->nrows;
- if (rmin >= rmax)
- return 0;
-
- while (n > 0)
- {
- for (r = rmin + 1; r < rmax; r++)
- {
- /* lines[r - 1] = lines[r]; */
- memcpy ((char *)lines[r - 1], (char *)lines[r],
- sizeof (SLsmg_Char_Type) * ncols);
- }
- blank_line (lines[rmax - 1], ncols, color);
- n--;
- }
-
- rmax--;
- while (n < 0)
- {
- for (r = rmax; r > rmin; r--)
- {
- memcpy ((char *)lines[r], (char *)lines[r - 1],
- sizeof (SLsmg_Char_Type) * ncols);
- }
- blank_line (lines[rmin], ncols, color);
- n++;
- }
-
- /* wmove (w, w->nrows - 1, 0); */
- /* wclrtobot (w); */
- return 0;
-}
-
-/* Note: if len is < 0, entire string will be used.
- */
-int SLcurses_waddnstr (SLcurses_Window_Type *w, char *str, int len)
-{
- SLsmg_Char_Type *b;
- SLsmg_Char_Type color;
- unsigned char ch;
- unsigned int nrows, ncols, crow, ccol;
-
- if ((w == NULL)
- || (str == NULL))
- return -1;
-
- w->modified = 1;
- nrows = w->nrows;
- ncols = w->ncols;
- crow = w->_cury;
- ccol = w->_curx;
- color = w->color;
-
- if (w->scroll_max <= nrows)
- nrows = w->scroll_max;
-
- if (crow >= nrows)
- crow = 0; /* wrap back to top */
-
- b = w->lines [crow] + ccol;
-
- while (len && ((ch = (unsigned char) *str++) != 0))
- {
- len--;
-
- if (ch == '\n')
- {
- w->_cury = crow;
- w->_curx = ccol;
- SLcurses_wclrtoeol (w);
- do_newline (w);
- crow = w->_cury;
- ccol = w->_curx;
- b = w->lines[crow];
- continue;
- }
-
- if (ccol >= ncols)
- {
- ccol = 0;
- crow++;
- if (crow >= nrows)
- {
- w->_curx = 0;
- w->_cury = crow;
- do_newline (w);
- crow = w->_cury;
- ccol = w->_curx;
- }
-
- b = w->lines [crow];
- }
-
- if (ch == '\t')
- {
- unsigned int n = ccol;
- n += SLsmg_Tab_Width;
- n = SLsmg_Tab_Width - (n % SLsmg_Tab_Width);
- if (ccol + n > ncols) n = ncols - len;
- ccol += n;
- while (n--)
- *b++ = SLSMG_BUILD_CHAR(' ',color);
- continue;
- }
-
- *b++ = SLSMG_BUILD_CHAR(ch, color);
- ccol++;
- }
-
- w->_curx = ccol;
- w->_cury = crow;
-
- return 0;
-}
-
-/* This routine IS NOT CORRECT. It needs to compute the proper overlap
- * and copy accordingly. Here, I just assume windows are same size.
- */
-#if 0
-int SLcurses_overlay (SLcurses_Window_Type *swin, SLcurses_Window_Type *dwin)
-{
- SLsmg_Char_Type *s, *smax, *d, *dmax;
-
- if ((swin == NULL) || (dwin == NULL))
- return -1;
-
- s = swin->buf;
- smax = swin->bufmax;
- d = dwin->buf;
- dmax = dwin->bufmax;
-
- while ((s < smax) && (d < dmax))
- {
- SLsmg_Char_Type ch = *s++;
- if (SLSMG_EXTRACT_CHAR(ch) != ' ')
- *d = ch;
- d++;
- }
-
- return -1; /* not implemented */
-}
-
-#endif
-
-SLcurses_Window_Type *SLcurses_subwin (SLcurses_Window_Type *orig,
- unsigned int nlines, unsigned int ncols,
- unsigned int begin_y, unsigned int begin_x)
-{
- SLcurses_Window_Type *sw;
- int r, c;
- unsigned int i;
-
- if (orig == NULL)
- return NULL;
-
- sw = (SLcurses_Window_Type *) SLmalloc (sizeof (SLcurses_Window_Type));
- if (sw == NULL)
- return NULL;
-
- SLMEMSET ((char *)sw, 0, sizeof (SLcurses_Window_Type));
-#if 1
- r = begin_y - orig->_begy;
-#else
- r = 1 + ((int)orig->nrows - (int)nlines) / 2;
-#endif
- if (r < 0) r = 0;
- if (r + nlines > orig->nrows) nlines = orig->nrows - r;
-
- c = ((int)orig->ncols - (int)ncols) / 2;
- if (c < 0) c = 0;
- if (c + ncols > orig->ncols) ncols = orig->ncols - c;
-
- sw->scroll_min = 0;
- sw->scroll_max = sw->nrows = nlines;
- sw->ncols = ncols;
- sw->_begy = begin_y;
- sw->_begx = begin_x;
- sw->_maxx = (begin_x + ncols) - 1;
- sw->_maxy = (begin_y + nlines) - 1;
-
- sw->lines = (SLsmg_Char_Type **) SLmalloc (nlines * sizeof (SLsmg_Char_Type *));
- if (sw->lines == NULL)
- {
- SLcurses_delwin (sw);
- return NULL;
- }
-
- for (i = 0; i < nlines; i++)
- {
- sw->lines [i] = orig->lines [r + i] + c;
- }
-
- sw->is_subwin = 1;
- return sw;
-}
-
-int SLcurses_wclear (SLcurses_Window_Type *w)
-{
- unsigned int i;
-
- if (w != NULL) w->modified = 1;
- for (i=0; i < w->nrows; i++)
- blank_line (w->lines[i], w->ncols, w->color);
- return 0;
-}
-
-int SLcurses_wdelch (SLcurses_Window_Type *w)
-{
- SLsmg_Char_Type *p, *p1, *pmax;
-
- p = w->lines[w->_cury];
- pmax = p + w->ncols;
- p += w->_curx;
- p1 = p + 1;
-
- while (p1 < pmax)
- {
- *p = *p1;
- p = p1;
- p1++;
- }
-
- if (p < pmax)
- *p = SLSMG_BUILD_CHAR(' ',w->color);
-
- w->modified = 1;
- return 0;
-}
-
-int SLcurses_winsch (SLcurses_Window_Type *w, int ch)
-{
- SLsmg_Char_Type *p, *p1, *pmax;
-
- p = w->lines[w->_cury];
- pmax = p + w->ncols;
- p += w->_curx;
- p1 = pmax - 1;
-
- while (pmax > p)
- {
- *pmax = *p1;
- pmax = p1;
- p1--;
- }
-
- if (p < pmax)
- *p = SLSMG_BUILD_CHAR(ch, w->color);
-
- w->modified = 1;
- return 0;
-}
-
-int SLcurses_endwin (void)
-{
- SLcurses_Is_Endwin = 1;
- SLsmg_suspend_smg ();
- SLang_reset_tty ();
- return 0;
-}
-
-#if 0
-int SLcurses_mvwscanw (SLcurses_Window_Type *w, unsigned int r, unsigned int c,
- char *fmt, ...)
-{
-#if HAVE_VFSCANF
- int ret;
- va_list ap;
-
- SLcurses_wmove (w, r, c);
- SLcurses_wrefresh (w);
-
- va_start(ap, fmt);
- ret = vfscanf (stdin, fmt, ap);
- va_end(ap);
- return ret;
-#else
- return 0;
-#endif
-}
-
-int SLcurses_wscanw (SLcurses_Window_Type *w, char *fmt, ...)
-{
-#if HAVE_VFSCANF
- va_list ap;
- int ret;
-
- SLcurses_wrefresh (w);
-
- va_start(ap, fmt);
- ret = vfscanf (stdin, fmt, ap);
- va_end(ap);
-
- return ret;
-#else
- return 0;
-#endif
-}
-
-int SLcurses_scanw (char *fmt, ...)
-{
-#ifdef HAVE_VFSCANF
- va_list ap;
- int ret;
-
- SLcurses_wrefresh (SLcurses_Stdscr);
-
- va_start(ap, fmt);
- ret = vfscanf (stdin, fmt, ap);
- va_end(ap);
-
- return ret;
-#else
- return 0;
-#endif
-}
-#endif
-
-int SLcurses_clearok (SLcurses_Window_Type *w, int bf)
-{
- if (bf)
- {
- SLsmg_cls ();
- w->modified = 1;
- }
- return 0;
-}
diff --git a/mdk-stage1/slang/slcurses.h b/mdk-stage1/slang/slcurses.h
deleted file mode 100644
index fa082304f..000000000
--- a/mdk-stage1/slang/slcurses.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include <stdio.h>
-
-#ifndef SLANG_VERSION
-# include <slang.h>
-#endif
-
-/* This is a temporary hack until lynx is fixed to not include this file. */
-#ifndef LYCURSES_H
-
-typedef struct
-{
- unsigned int _begy, _begx, _maxy, _maxx;
- unsigned int _curx, _cury;
- unsigned int nrows, ncols;
- unsigned int scroll_min, scroll_max;
- SLsmg_Char_Type **lines;
- SLsmg_Char_Type color;
- int is_subwin;
- SLtt_Char_Type attr;
- int delay_off;
- int scroll_ok;
- int modified;
- int has_box;
- int use_keypad;
-}
-SLcurses_Window_Type;
-
-extern int SLcurses_wclrtobot (SLcurses_Window_Type *);
-extern int SLcurses_wscrl (SLcurses_Window_Type *, int);
-extern int SLcurses_wrefresh (SLcurses_Window_Type *);
-extern int SLcurses_delwin (SLcurses_Window_Type *);
-extern int SLcurses_wprintw (SLcurses_Window_Type *, char *, ...);
-extern SLcurses_Window_Type *SLcurses_newwin (unsigned int, unsigned int,
- unsigned int, unsigned int);
-
-extern SLcurses_Window_Type *SLcurses_subwin (SLcurses_Window_Type *,
- unsigned int, unsigned int,
- unsigned int, unsigned int);
-
-extern int SLcurses_wnoutrefresh (SLcurses_Window_Type *);
-extern int SLcurses_wclrtoeol (SLcurses_Window_Type *);
-
-extern int SLcurses_wmove (SLcurses_Window_Type *, unsigned int, unsigned int);
-extern int SLcurses_waddch (SLcurses_Window_Type *, SLtt_Char_Type);
-extern int SLcurses_waddnstr (SLcurses_Window_Type *, char *, int);
-
-#define waddnstr SLcurses_waddnstr
-#define waddch SLcurses_waddch
-#define waddstr(w,s) waddnstr((w),(s),-1)
-#define addstr(x) waddstr(stdscr, (x))
-#define addnstr(s,n) waddnstr(stdscr,(s),(n))
-#define addch(ch) waddch(stdscr,(ch))
-
-#define mvwaddnstr(w,y,x,s,n) \
- (-1 == wmove((w),(y),(x)) ? -1 : waddnstr((w),(s),(n)))
-#define mvwaddstr(w,y,x,s) \
- (-1 == wmove((w),(y),(x)) ? -1 : waddnstr((w),(s), -1))
-#define mvaddnstr(y,x,s,n) mvwaddnstr(stdscr,(y),(x),(s),(n))
-#define mvaddstr(y,x,s) mvwaddstr(stdscr,(y),(x),(s))
-#define mvwaddch(w,y,x,c) \
- ((-1 == wmove((w),(y),(x))) ? -1 : waddch((w),(c)))
-#define mvaddch(y,x,c) mvwaddch(stdscr,(y),(x),(c))
-
-extern int SLcurses_wclear (SLcurses_Window_Type *w);
-extern int SLcurses_printw (char *, ...);
-
-#if 0
-/* Why are these functions part of curses??? */
-extern int SLcurses_mvwscanw (SLcurses_Window_Type *, unsigned int, unsigned int,
- char *, ...);
-extern int SLcurses_wscanw (SLcurses_Window_Type *, char *, ...);
-extern int SLcurses_scanw (char *, ...);
-#define mvwscanw SLcurses_mvwscanw
-#define wscanw SLcurses_wscanw
-#define scanw SLcurses_scanw
-#endif
-
-extern SLcurses_Window_Type *SLcurses_Stdscr;
-#define WINDOW SLcurses_Window_Type
-#define stdscr SLcurses_Stdscr
-
-#define subwin SLcurses_subwin
-#define wclrtobot SLcurses_wclrtobot
-#define wscrl SLcurses_wscrl
-#define scrl(n) wscrl(stdscr,(n))
-#define scroll(w) wscrl((w),1)
-#define wrefresh SLcurses_wrefresh
-#define delwin SLcurses_delwin
-#define wmove SLcurses_wmove
-#define newwin SLcurses_newwin
-#define wnoutrefresh SLcurses_wnoutrefresh
-#define werase(w) SLcurses_wmove((w),0,0); SLcurses_wclrtobot(w)
-#define wclear(w) SLcurses_wmove((w),0,0); SLcurses_wclrtobot(w)
-#define wprintw SLcurses_wprintw
-#define mvwprintw SLcurses_mvwprintw
-
-#define winch(w) \
- ((((w)->_cury < (w)->nrows) && ((w)->_curx < (w)->ncols)) \
- ? ((w)->lines[(w)->_cury][(w)->_curx]) : 0)
-
-#define inch() winch(stdscr)
-#define mvwinch(w,x,y) \
- ((-1 != wmove((w),(x),(y))) ? winch(w) : (-1))
-#define doupdate SLsmg_refresh
-
-#define mvwin(w,a,b) ((w)->_begy = (a), (w)->_begx = (b))
-
-extern int SLcurses_mvprintw (int, int, char *, ...);
-extern int SLcurses_mvwprintw (SLcurses_Window_Type *, int, int, char *, ...);
-extern int SLcurses_has_colors(void);
-extern int SLcurses_nil (void);
-extern int SLcurses_wgetch (SLcurses_Window_Type *);
-extern int SLcurses_getch (void);
-
-extern int SLcurses_wattrset (SLcurses_Window_Type *, SLtt_Char_Type);
-extern int SLcurses_wattron (SLcurses_Window_Type *, SLtt_Char_Type);
-extern int SLcurses_wattroff (SLcurses_Window_Type *, SLtt_Char_Type);
-#define attrset(x) SLcurses_wattrset(stdscr, (x))
-#define attron(x) SLcurses_wattron(stdscr, (x))
-#define attroff(x) SLcurses_wattroff(stdscr, (x))
-#define wattrset(w, x) SLcurses_wattrset((w), (x))
-#define wattron(w, x) SLcurses_wattron((w), (x))
-#define wattroff(w, x) SLcurses_wattroff((w), (x))
-#define wattr_get(w) ((w)->color << 8)
-#define attr_get() wattr_get(stdscr)
-
-#define COLOR_PAIR(x) ((x) << 8)
-
-extern int SLcurses_start_color (void);
-#define start_color SLcurses_start_color
-
-#define ERR 0xFFFF
-#define wgetch SLcurses_wgetch
-#define getch SLcurses_getch
-
-extern int SLcurses_nodelay (SLcurses_Window_Type *, int);
-extern SLcurses_Window_Type *SLcurses_initscr (void);
-#define initscr SLcurses_initscr
-
-extern int SLcurses_cbreak (void);
-extern int SLcurses_raw (void);
-#define cbreak SLcurses_cbreak
-#define crmode SLcurses_cbreak
-#define raw SLcurses_raw
-#define noraw SLang_reset_tty
-#define nocbreak SLang_reset_tty
-
-#define mvprintw SLcurses_mvprintw
-#define has_colors SLcurses_has_colors
-#define nodelay SLcurses_nodelay
-
-#define ungetch SLang_ungetkey
-
-#define COLS SLtt_Screen_Cols
-#define LINES SLtt_Screen_Rows
-
-#define move(x,y) SLcurses_wmove(stdscr, (x), (y))
-#define wclrtoeol SLcurses_wclrtoeol
-#define clrtoeol() SLcurses_wclrtoeol(stdscr)
-#define clrtobot() SLcurses_wclrtobot(stdscr)
-
-#define printw SLcurses_printw
-#define mvprintw SLcurses_mvprintw
-#define wstandout(w) SLcurses_wattrset((w),A_STANDOUT)
-#define wstandend(w) SLcurses_wattrset((w),A_NORMAL)
-#define standout() SLcurses_wattrset(stdscr,A_STANDOUT)
-#define standend() SLcurses_wattrset(stdscr,A_NORMAL)
-
-#define refresh() SLcurses_wrefresh(stdscr)
-#define clear() SLcurses_wclear(stdscr)
-#define erase() werase(stdscr)
-#define touchline SLsmg_touch_lines
-#define resetterm SLang_reset_tty
-
-extern int SLcurses_endwin (void);
-#define endwin SLcurses_endwin
-extern int SLcurses_Is_Endwin;
-#define isendwin() SLcurses_Is_Endwin
-
-#define keypad(w,x) ((w)->use_keypad = (x))
-
-#define KEY_MIN SL_KEY_UP
-#define KEY_DOWN SL_KEY_DOWN
-#define KEY_UP SL_KEY_UP
-#define KEY_LEFT SL_KEY_LEFT
-#define KEY_RIGHT SL_KEY_RIGHT
-#define KEY_A1 SL_KEY_A1
-#define KEY_B1 SL_KEY_B1
-#define KEY_C1 SL_KEY_C1
-#define KEY_A2 SL_KEY_A2
-#define KEY_B2 SL_KEY_B2
-#define KEY_C2 SL_KEY_C2
-#define KEY_A3 SL_KEY_A3
-#define KEY_B3 SL_KEY_B3
-#define KEY_C3 SL_KEY_C3
-#define KEY_REDO SL_KEY_REDO
-#define KEY_UNDO SL_KEY_UNDO
-#define KEY_BACKSPACE SL_KEY_BACKSPACE
-#define KEY_PPAGE SL_KEY_PPAGE
-#define KEY_NPAGE SL_KEY_NPAGE
-#define KEY_HOME SL_KEY_HOME
-#define KEY_END SL_KEY_END
-#define KEY_F0 SL_KEY_F0
-#define KEY_F SL_KEY_F
-#define KEY_ENTER SL_KEY_ENTER
-#define KEY_MAX 0xFFFF
-
-/* Ugly Hacks that may not work */
-#define flushinp SLcurses_nil
-#define winsertln(w) \
- ((w)->scroll_min=(w)->_cury, \
- (w)->scroll_max=(w)->nrows, \
- wscrl((w), -1))
-
-extern SLtt_Char_Type SLcurses_Acs_Map [128];
-#define acs_map SLcurses_Acs_Map
-
-#define ACS_ULCORNER (acs_map[SLSMG_ULCORN_CHAR])
-#define ACS_URCORNER (acs_map[SLSMG_URCORN_CHAR])
-#define ACS_LRCORNER (acs_map[SLSMG_LRCORN_CHAR])
-#define ACS_LLCORNER (acs_map[SLSMG_LLCORN_CHAR])
-#define ACS_TTEE (acs_map[SLSMG_UTEE_CHAR])
-#define ACS_LTEE (acs_map[SLSMG_LTEE_CHAR])
-#define ACS_RTEE (acs_map[SLSMG_RTEE_CHAR])
-#define ACS_BTEE (acs_map[SLSMG_DTEE_CHAR])
-#define ACS_PLUS (acs_map[SLSMG_PLUS_CHAR])
-#define ACS_VLINE (acs_map[SLSMG_VLINE_CHAR])
-#define ACS_HLINE (acs_map[SLSMG_HLINE_CHAR])
-#define ACS_S1 '-'
-#define ACS_S9 '-'
-#define ACS_DIAMOND '&'
-#define ACS_CKBOARD (acs_map[SLSMG_CKBRD_CHAR])
-#define ACS_DEGREE 'o'
-#define ACS_PLMINUS '+'
-#define ACS_BULLET '*'
-#define ACS_LARROW '<'
-#define ACS_RARROW '>'
-#define ACS_DARROW 'v'
-#define ACS_UARROW '^'
-#define ACS_BOARD '#'
-#define ACS_LANTERN '#'
-#define ACS_BLOCK '#'
-
-#if 1
-#define hline(x,y) SLcurses_nil ()
-#define vline(x,y) SLcurses_nil ()
-#endif
-
-#define A_CHARTEXT 0x00FF
-#define A_NORMAL 0
-#define A_BOLD 0x1000
-#define A_REVERSE 0x2000
-#define A_STANDOUT A_REVERSE
-#define A_UNDERLINE 0x4000
-#define A_BLINK 0
-#define A_COLOR 0x0700
-#define A_ALTCHARSET 0x8000
-#define A_DIM 0
-#define A_PROTECT 0
-#define A_INVIS 0
-
-#define COLOR_BLACK SLSMG_COLOR_BLACK
-#define COLOR_RED SLSMG_COLOR_RED
-#define COLOR_GREEN SLSMG_COLOR_GREEN
-#define COLOR_YELLOW SLSMG_COLOR_BROWN
-#define COLOR_BLUE SLSMG_COLOR_BLUE
-#define COLOR_MAGENTA SLSMG_COLOR_MAGENTA
-#define COLOR_CYAN SLSMG_COLOR_CYAN
-#define COLOR_WHITE SLSMG_COLOR_LGRAY
-
-extern int SLcurses_Num_Colors;
-#define COLORS SLcurses_Num_Colors
-#define COLOR_PAIRS (SLcurses_Num_Colors*SLcurses_Num_Colors)
-
-#define init_pair(_x,_f,_b) \
- SLtt_set_color_object((_x), ((_f) == (_b) ? 0x0700 : ((_f) | ((_b) << 8)) << 8))
-
-#define scrollok(a,b) ((a)->scroll_ok = (b))
-#define getyx(a,y,x) (y=(a)->_cury, x=(a)->_curx)
-#define getmaxyx(a,y,x) (y=(a)->nrows, x=(a)->ncols)
-#define napms(x) usleep(1000 * (x))
-typedef SLtt_Char_Type chtype;
-#define beep SLtt_beep
-#define curs_set(x) SLtt_set_cursor_visibility(x)
-#define touchwin(x) SLsmg_touch_lines((x)->_begy, (x)->nrows)
-#define flash SLtt_beep
-
-#define wsetscrreg(w,a,b) ((w)->scroll_min = (a), (w)->scroll_max = (b))
-
-#define wtimeout(a,b) (a)->delay_off = ((b >= 0) ? (b) / 100 : -1)
-#define timeout(a) wtimeout(stdscr, a)
-extern int SLcurses_wdelch (SLcurses_Window_Type *);
-#define wdelch SLcurses_wdelch
-#define delch() wdelch(stdscr)
-
-extern int SLcurses_winsch (SLcurses_Window_Type *, int);
-#define winsch SLcurses_winsch
-
-extern int SLcurses_Esc_Delay;/* ESC expire time in milliseconds (ncurses compatible) */
-#define ESCDELAY SLcurses_Esc_Delay
-
-extern int SLcurses_clearok (SLcurses_Window_Type *, int);
-#define clearok SLcurses_clearok
-
-/* Functions that have not been implemented. */
-#define copywin(w,v,a,b,c,d,e,f,g) SLcurses_nil()
-#define wdeleteln(win) SLcurses_nil()
-#define resetty SLcurses_nil
-#define savetty SLcurses_nil
-#define overlay(u,v) SLcurses_nil()
-
-/* These functions do nothing */
-#define savetty SLcurses_nil
-#define nonl SLcurses_nil
-#define echo SLcurses_nil
-#define noecho SLcurses_nil
-#define saveterm SLcurses_nil
-#define box(w,y,z) ((w)->has_box = 1, (w)->modified = 1)
-#define leaveok(a,b) SLcurses_nil()
-#define nl() SLcurses_nil()
-#define trace(x) SLcurses_nil()
-#define tigetstr(x) NULL
-
-/* These have no place in C */
-#define TRUE 1
-#define FALSE 0
-#define bool int
-
-/* Lynx compatability */
-#else
-
-#define stdscr NULL
-#define COLS SLtt_Screen_Cols
-#define LINES SLtt_Screen_Rows
-#define move SLsmg_gotorc
-#define addstr SLsmg_write_string
-#define clear SLsmg_cls
-#define standout SLsmg_reverse_video
-#define standend SLsmg_normal_video
-#define clrtoeol SLsmg_erase_eol
-#define scrollok(a,b) SLsmg_Newline_Moves = ((b) ? 1 : -1)
-#define addch SLsmg_write_char
-#define echo()
-#define printw SLsmg_printf
-#define endwin SLsmg_reset_smg(),SLang_reset_tty
-
-#endif
diff --git a/mdk-stage1/slang/sldisply.c b/mdk-stage1/slang/sldisply.c
deleted file mode 100644
index 1e1161774..000000000
--- a/mdk-stage1/slang/sldisply.c
+++ /dev/null
@@ -1,2596 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <time.h>
-#include <ctype.h>
-
-#if !defined(VMS) || (__VMS_VER >= 70000000)
-# include <sys/time.h>
-# ifdef __QNX__
-# include <sys/select.h>
-# endif
-# include <sys/types.h>
-#endif
-
-#ifdef __BEOS__
-/* Prototype for select */
-# include <net/socket.h>
-#endif
-
-#ifdef HAVE_TERMIOS_H
-# include <termios.h>
-#endif
-
-#ifdef VMS
-# include <unixlib.h>
-# include <unixio.h>
-# include <dvidef.h>
-# include <descrip.h>
-# include <lib$routines.h>
-# include <starlet.h>
-#else
-# if !defined(sun)
-# include <sys/ioctl.h>
-# endif
-#endif
-
-#ifdef SYSV
-# include <sys/termio.h>
-# include <sys/stream.h>
-# include <sys/ptem.h>
-# include <sys/tty.h>
-#endif
-
-#if defined (_AIX) && !defined (FD_SET)
-# include <sys/select.h> /* for FD_ISSET, FD_SET, FD_ZERO */
-#endif
-
-#include <errno.h>
-
-#if defined(__DECC) && defined(VMS)
-/* These get prototypes for write an sleep */
-# include <unixio.h>
-#endif
-#include <signal.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Colors: These definitions are used for the display. However, the
- * application only uses object handles which get mapped to this
- * internal representation. The mapping is performed by the Color_Map
- * structure below. */
-
-#define CHAR_MASK 0x000000FF
-#define FG_MASK 0x0000FF00
-#define BG_MASK 0x00FF0000
-#define ATTR_MASK 0x1F000000
-#define BGALL_MASK 0x0FFF0000
-
-/* The 0x10000000 bit represents the alternate character set. BGALL_MASK does
- * not include this attribute.
- */
-
-#define GET_FG(color) ((color & FG_MASK) >> 8)
-#define GET_BG(color) ((color & BG_MASK) >> 16)
-#define MAKE_COLOR(fg, bg) (((fg) | ((bg) << 8)) << 8)
-
-int SLtt_Screen_Cols;
-int SLtt_Screen_Rows;
-int SLtt_Term_Cannot_Insert;
-int SLtt_Term_Cannot_Scroll;
-int SLtt_Use_Ansi_Colors;
-int SLtt_Blink_Mode = 1;
-int SLtt_Use_Blink_For_ACS = 0;
-int SLtt_Newline_Ok = 0;
-int SLtt_Has_Alt_Charset = 0;
-int SLtt_Force_Keypad_Init = 0;
-
-void (*_SLtt_color_changed_hook)(void);
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-static int Bce_Color_Offset = 0;
-#endif
-static int Can_Background_Color_Erase = 1;
-
-/* -1 means unknown */
-int SLtt_Has_Status_Line = -1; /* hs */
-int SLang_TT_Write_FD = -1;
-
-static int Automatic_Margins;
-/* static int No_Move_In_Standout; */
-static int Worthless_Highlight;
-#define HP_GLITCH_CODE
-#ifdef HP_GLITCH_CODE
-/* This glitch is exclusive to HP term. Basically it means that to clear
- * attributes, one has to erase to the end of the line.
- */
-static int Has_HP_Glitch;
-#endif
-
-static char *Reset_Color_String;
-static int Is_Color_Terminal = 0;
-
-static int Linux_Console;
-
-/* It is crucial that JMAX_COLORS must be less than 128 since the high bit
- * is used to indicate a character from the ACS (alt char set). The exception
- * to this rule is if SLtt_Use_Blink_For_ACS is true. This means that of
- * the highbit is set, we interpret that as a blink character. This is
- * exploited by DOSemu.
- */
-#define JMAX_COLORS 256
-#define JNORMAL_COLOR 0
-
-typedef struct
-{
- SLtt_Char_Type fgbg;
- SLtt_Char_Type mono;
- char *custom_esc;
-}
-Ansi_Color_Type;
-
-#define RGB1(r, g, b) ((r) | ((g) << 1) | ((b) << 2))
-#define RGB(r, g, b, br, bg, bb) ((RGB1(r, g, b) << 8) | (RGB1(br, bg, bb) << 16))
-
-static Ansi_Color_Type Ansi_Color_Map[JMAX_COLORS] =
-{
- {RGB(1, 1, 1, 0, 0, 0), 0x00000000, NULL}, /* white/black */
- {RGB(0, 1, 0, 0, 0, 0), SLTT_REV_MASK, NULL}, /* green/black */
- {RGB(1, 0, 1, 0, 0, 0), SLTT_REV_MASK, NULL}, /* magenta/black */
- {RGB(0, 1, 1, 0, 0, 0), SLTT_REV_MASK, NULL}, /* cyan/black */
- {RGB(1, 0, 0, 0, 0, 0), SLTT_REV_MASK, NULL},
- {RGB(0, 1, 0, 0, 0, 1), SLTT_REV_MASK, NULL},
- {RGB(1, 0, 0, 0, 0, 1), SLTT_REV_MASK, NULL},
- {RGB(1, 0, 0, 0, 1, 0), SLTT_REV_MASK, NULL},
- {RGB(0, 0, 1, 1, 0, 0), SLTT_REV_MASK, NULL},
- {RGB(0, 1, 0, 1, 0, 0), SLTT_REV_MASK, NULL},
- {RGB(0, 1, 1, 1, 1, 1), SLTT_REV_MASK, NULL},
- {RGB(1, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
- {RGB(1, 0, 1, 1, 1, 1), SLTT_REV_MASK, NULL},
- {RGB(0, 0, 0, 0, 1, 1), SLTT_REV_MASK, NULL},
- {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
- {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
- {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
- {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL}
-};
-
-static char *Color_Fg_Str = "\033[3%dm";
-static char *Color_Bg_Str = "\033[4%dm";
-static char *Default_Color_Fg_Str = "\033[39m";
-static char *Default_Color_Bg_Str = "\033[49m";
-
-static int Max_Terminfo_Colors = 8; /* termcap Co */
-
-char *SLtt_Graphics_Char_Pairs; /* ac termcap string -- def is vt100 */
-
-/* 1 if terminal lacks the ability to go into insert mode or into delete
- mode. Currently controlled by S-Lang but later perhaps termcap. */
-
-static char *UnderLine_Vid_Str;
-static char *Blink_Vid_Str;
-static char *Bold_Vid_Str;
-static char *Ins_Mode_Str; /* = "\033[4h"; */ /* ins mode (im) */
-static char *Eins_Mode_Str; /* = "\033[4l"; */ /* end ins mode (ei) */
-static char *Scroll_R_Str; /* = "\033[%d;%dr"; */ /* scroll region */
-static char *Cls_Str; /* = "\033[2J\033[H"; */ /* cl termcap STR for ansi terminals */
-static char *Rev_Vid_Str; /* = "\033[7m"; */ /* mr,so termcap string */
-static char *Norm_Vid_Str; /* = "\033[m"; */ /* me,se termcap string */
-static char *Del_Eol_Str; /* = "\033[K"; */ /* ce */
-static char *Del_Bol_Str; /* = "\033[1K"; */ /* cb */
-static char *Del_Char_Str; /* = "\033[P"; */ /* dc */
-static char *Del_N_Lines_Str; /* = "\033[%dM"; */ /* DL */
-static char *Add_N_Lines_Str; /* = "\033[%dL"; */ /* AL */
-static char *Rev_Scroll_Str;
-static char *Curs_Up_Str;
-static char *Curs_F_Str; /* RI termcap string */
-static char *Cursor_Visible_Str; /* ve termcap string */
-static char *Cursor_Invisible_Str; /* vi termcap string */
-#if 0
-static char *Start_Mouse_Rpt_Str; /* Start mouse reporting mode */
-static char *End_Mouse_Rpt_Str; /* End mouse reporting mode */
-#endif
-static char *Start_Alt_Chars_Str; /* as */
-static char *End_Alt_Chars_Str; /* ae */
-static char *Enable_Alt_Char_Set; /* eA */
-
-static char *Term_Init_Str;
-static char *Keypad_Init_Str;
-static char *Term_Reset_Str;
-static char *Keypad_Reset_Str;
-
-/* status line functions */
-static char *Disable_Status_line_Str; /* ds */
-static char *Return_From_Status_Line_Str; /* fs */
-static char *Goto_Status_Line_Str; /* ts */
-static int Num_Status_Line_Columns; /* ws */
-/* static int Status_Line_Esc_Ok; */ /* es */
-
-/* static int Len_Curs_F_Str = 5; */
-
-/* cm string has %i%d since termcap numbers columns from 0 */
-/* char *CURS_POS_STR = "\033[%d;%df"; ansi-- hor and vert pos */
-static char *Curs_Pos_Str; /* = "\033[%i%d;%dH";*/ /* cm termcap string */
-
-/* scrolling region */
-static int Scroll_r1 = 0, Scroll_r2 = 23;
-static int Cursor_r, Cursor_c; /* 0 based */
-
-/* current attributes --- initialized to impossible value */
-static SLtt_Char_Type Current_Fgbg = 0xFFFFFFFFU;
-
-static int Cursor_Set; /* 1 if cursor position known, 0
- * if not. -1 if only row is known
- */
-
-#define MAX_OUTPUT_BUFFER_SIZE 4096
-
-static unsigned char Output_Buffer[MAX_OUTPUT_BUFFER_SIZE];
-static unsigned char *Output_Bufferp = Output_Buffer;
-
-unsigned long SLtt_Num_Chars_Output;
-
-int _SLusleep (unsigned long usecs)
-{
-#if !defined(VMS) || (__VMS_VER >= 70000000)
- struct timeval tv;
- tv.tv_sec = usecs / 1000000;
- tv.tv_usec = usecs % 1000000;
- return select(0, NULL, NULL, NULL, &tv);
-#else
- return 0;
-#endif
-}
-
-int SLtt_flush_output (void)
-{
- int nwrite = 0;
- unsigned int total;
- int n = (int) (Output_Bufferp - Output_Buffer);
-
- SLtt_Num_Chars_Output += n;
-
- total = 0;
- while (n > 0)
- {
- nwrite = write (SLang_TT_Write_FD, (char *) Output_Buffer + total, n);
- if (nwrite == -1)
- {
- nwrite = 0;
-#ifdef EAGAIN
- if (errno == EAGAIN)
- {
- _SLusleep (100000); /* 1/10 sec */
- continue;
- }
-#endif
-#ifdef EWOULDBLOCK
- if (errno == EWOULDBLOCK)
- {
- _SLusleep (100000);
- continue;
- }
-#endif
-#ifdef EINTR
- if (errno == EINTR) continue;
-#endif
- break;
- }
- n -= nwrite;
- total += nwrite;
- }
- Output_Bufferp = Output_Buffer;
- return n;
-}
-
-int SLtt_Baud_Rate;
-static void tt_write(char *str, unsigned int n)
-{
- static unsigned long last_time;
- static int total;
- unsigned long now;
- unsigned int ndiff;
-
- if ((str == NULL) || (n == 0)) return;
- total += n;
-
- while (1)
- {
- ndiff = MAX_OUTPUT_BUFFER_SIZE - (int) (Output_Bufferp - Output_Buffer);
- if (ndiff < n)
- {
- SLMEMCPY ((char *) Output_Bufferp, (char *) str, ndiff);
- Output_Bufferp += ndiff;
- SLtt_flush_output ();
- n -= ndiff;
- str += ndiff;
- }
- else
- {
- SLMEMCPY ((char *) Output_Bufferp, str, n);
- Output_Bufferp += n;
- break;
- }
- }
-
- if (((SLtt_Baud_Rate > 150) && (SLtt_Baud_Rate <= 9600))
- && (10 * total > SLtt_Baud_Rate))
- {
- total = 0;
- if ((now = (unsigned long) time(NULL)) - last_time <= 1)
- {
- SLtt_flush_output ();
- sleep((unsigned) 1);
- }
- last_time = now;
- }
-}
-
-static void tt_write_string (char *str)
-{
- if (str != NULL) tt_write(str, strlen(str));
-}
-
-void SLtt_write_string (char *str)
-{
- tt_write_string (str);
- Cursor_Set = 0;
-}
-
-void SLtt_putchar (char ch)
-{
- SLtt_normal_video ();
- if (Cursor_Set == 1)
- {
- if (ch >= ' ') Cursor_c++;
- else if (ch == '\b') Cursor_c--;
- else if (ch == '\r') Cursor_c = 0;
- else Cursor_Set = 0;
-
- if ((Cursor_c + 1 == SLtt_Screen_Cols)
- && Automatic_Margins) Cursor_Set = 0;
- }
-
- if (Output_Bufferp < Output_Buffer + MAX_OUTPUT_BUFFER_SIZE)
- {
- *Output_Bufferp++ = (unsigned char) ch;
- }
- else tt_write (&ch, 1);
-}
-
-static unsigned int tt_sprintf(char *buf, char *fmt, int x, int y)
-{
- char *fmt_max;
- register unsigned char *b, ch;
- int offset;
- int z, z1, parse_level;
- int zero_pad;
- int field_width;
- int variables [26];
- int stack [64];
- unsigned int stack_len;
- int parms [10];
-#define STACK_POP (stack_len ? stack[--stack_len] : 0)
-
- if (fmt == NULL)
- {
- *buf = 0;
- return 0;
- }
-
- stack [0] = y; /* pushed for termcap */
- stack [1] = x;
- stack_len = 2;
-
- parms [1] = x; /* p1 */
- parms [2] = y; /* p2 */
-
- offset = 0;
- zero_pad = 0;
- field_width = 0;
-
- b = (unsigned char *) buf;
- fmt_max = fmt + strlen (fmt);
-
- while (fmt < fmt_max)
- {
- ch = *fmt++;
-
- if (ch != '%')
- {
- *b++ = ch;
- continue;
- }
-
- if (fmt == fmt_max) break;
- ch = *fmt++;
-
- switch (ch)
- {
- default:
- *b++ = ch;
- break;
-
- case 'p':
-
- if (fmt == fmt_max) break;
- ch = *fmt++;
- if ((ch >= '0') && (ch <= '9'))
- stack [stack_len++] = parms [ch - '0'];
- break;
-
- case '\'': /* 'x' */
- if (fmt == fmt_max) break;
- stack [stack_len++] = *fmt++;
- if (fmt < fmt_max) fmt++; /* skip ' */
- break;
-
- case '{': /* literal constant, e.g. {30} */
- z = 0;
- while ((fmt < fmt_max) && ((ch = *fmt) <= '9') && (ch >= '0'))
- {
- z = z * 10 + (ch - '0');
- fmt++;
- }
- stack [stack_len++] = z;
- if ((ch == '}') && (fmt < fmt_max)) fmt++;
- break;
-
- case '0':
- if (fmt == fmt_max) break;
- ch = *fmt;
- if ((ch != '2') && (ch != '3'))
- break;
- zero_pad = 1;
- fmt++;
- /* drop */
-
- case '2':
- case '3':
- if (fmt == fmt_max)
- if (*fmt == 'x')
- {
- char x_fmt_buf [4];
- char *x_fmt_buf_ptr;
-
- x_fmt_buf_ptr = x_fmt_buf;
- if (zero_pad) *x_fmt_buf_ptr++ = '0';
- *x_fmt_buf_ptr++ = ch;
- *x_fmt_buf_ptr++ = 'X';
- *x_fmt_buf_ptr = 0;
-
- z = STACK_POP;
- z += offset;
-
- sprintf ((char *)b, x_fmt_buf, z);
- b += strlen ((char *)b);
- zero_pad = 0;
- break;
- }
-
- field_width = (ch - '0');
- /* drop */
-
- case 'd':
- z = STACK_POP;
- z += offset;
- if (z >= 100)
- {
- *b++ = z / 100 + '0';
- z = z % 100;
- zero_pad = 1;
- field_width = 2;
- }
- else if (zero_pad && (field_width == 3))
- *b++ = '0';
-
- if (z >= 10)
- {
- *b++ = z / 10 + '0';
- z = z % 10;
- }
- else if (zero_pad && (field_width >= 2))
- *b++ = '0';
-
- *b++ = z + '0';
- field_width = zero_pad = 0;
- break;
-
- case 'x':
- z = STACK_POP;
- z += offset;
- sprintf ((char *) b, "%X", z);
- b += strlen ((char *)b);
- break;
-
- case 'i':
- offset = 1;
- break;
-
- case '+':
- /* Handling this depends upon whether or not we are parsing
- * terminfo. Terminfo requires the stack so use it as an
- * indicator.
- */
- if (stack_len > 2)
- {
- z = STACK_POP;
- stack [stack_len - 1] += z;
- }
- else if (fmt < fmt_max)
- {
- ch = *fmt++;
- if ((unsigned char) ch == 128) ch = 0;
- ch = ch + (unsigned char) STACK_POP;
- if (ch == '\n') ch++;
- *b++ = ch;
- }
- break;
-
- /* Binary operators */
- case '-':
- case '*':
- case '/':
- case 'm':
- case '&':
- case '|':
- case '^':
- case '=':
- case '>':
- case '<':
- case 'A':
- case 'O':
- z1 = STACK_POP;
- z = STACK_POP;
- switch (ch)
- {
- case '-': z = (z - z1); break;
- case '*': z = (z * z1); break;
- case '/': z = (z / z1); break;
- case 'm': z = (z % z1); break;
- case '&': z = (z & z1); break;
- case '|': z = (z | z1); break;
- case '^': z = (z ^ z1); break;
- case '=': z = (z == z1); break;
- case '>': z = (z > z1); break;
- case '<': z = (z < z1); break;
- case 'A': z = (z && z1); break;
- case 'O': z = (z || z1); break;
- }
- stack [stack_len++] = z;
- break;
-
- /* unary */
- case '!':
- z = STACK_POP;
- stack [stack_len++] = !z;
- break;
-
- case '~':
- z = STACK_POP;
- stack [stack_len++] = ~z;
- break;
-
- case 'r': /* termcap -- swap parameters */
- z = stack [0];
- stack [0] = stack [1];
- stack [1] = z;
- break;
-
- case '.': /* termcap */
- case 'c':
- ch = (unsigned char) STACK_POP;
- if (ch == '\n') ch++;
- *b++ = ch;
- break;
-
- case 'g':
- if (fmt == fmt_max) break;
- ch = *fmt++;
- if ((ch >= 'a') && (ch <= 'z'))
- stack [stack_len++] = variables [ch - 'a'];
- break;
-
- case 'P':
- if (fmt == fmt_max) break;
- ch = *fmt++;
- if ((ch >= 'a') && (ch <= 'z'))
- variables [ch - 'a'] = STACK_POP;
- break;
-
- /* If then else parsing. Actually, this is rather easy. The
- * key is to notice that 'then' does all the work. 'if' simply
- * there to indicate the start of a test and endif indicates
- * the end of tests. If 'else' is seen, then skip to
- * endif.
- */
- case '?': /* if */
- case ';': /* endif */
- break;
-
- case 't': /* then */
- z = STACK_POP;
- if (z != 0)
- break; /* good. Continue parsing. */
-
- /* z == 0 and test has failed. So, skip past this entire if
- * expression to the matching else or matching endif.
- */
- /* drop */
- case 'e': /* else */
-
- parse_level = 0;
- while (fmt < fmt_max)
- {
- unsigned char ch1;
-
- ch1 = *fmt++;
- if ((ch1 != '%') || (fmt == fmt_max))
- continue;
-
- ch1 = *fmt++;
-
- if (ch1 == '?') parse_level++; /* new if */
- else if (ch1 == 'e')
- {
- if ((ch != 'e') && (parse_level == 0))
- break;
- }
- else if (ch1 == ';')
- {
- if (parse_level == 0)
- break;
- parse_level--;
- }
- }
- break;
- }
- }
- *b = 0;
- return (unsigned int) (b - (unsigned char *) buf);
-}
-
-static void tt_printf(char *fmt, int x, int y)
-{
- char buf[1024];
- unsigned int n;
- if (fmt == NULL) return;
- n = tt_sprintf(buf, fmt, x, y);
- tt_write(buf, n);
-}
-
-void SLtt_set_scroll_region (int r1, int r2)
-{
- Scroll_r1 = r1;
- Scroll_r2 = r2;
- tt_printf (Scroll_R_Str, Scroll_r1, Scroll_r2);
- Cursor_Set = 0;
-}
-
-void SLtt_reset_scroll_region (void)
-{
- SLtt_set_scroll_region(0, SLtt_Screen_Rows - 1);
-}
-
-int SLtt_set_cursor_visibility (int show)
-{
- if ((Cursor_Visible_Str == NULL) || (Cursor_Invisible_Str == NULL))
- return -1;
-
- tt_write_string (show ? Cursor_Visible_Str : Cursor_Invisible_Str);
- return 0;
-}
-
-/* the goto_rc function moves to row relative to scrolling region */
-void SLtt_goto_rc(int r, int c)
-{
- char *s = NULL;
- int n;
- char buf[6];
-
- if ((c < 0) || (r < 0))
- {
- Cursor_Set = 0;
- return;
- }
-
- /* if (No_Move_In_Standout && Current_Fgbg) SLtt_normal_video (); */
- r += Scroll_r1;
-
- if ((Cursor_Set > 0) || ((Cursor_Set < 0) && !Automatic_Margins))
- {
- n = r - Cursor_r;
- if ((n == -1) && (Cursor_Set > 0) && (Cursor_c == c)
- && (Curs_Up_Str != NULL))
- {
- s = Curs_Up_Str;
- }
- else if ((n >= 0) && (n <= 4))
- {
- if ((n == 0) && (Cursor_Set == 1)
- && ((c > 1) || (c == Cursor_c)))
- {
- if (Cursor_c == c) return;
- if (Cursor_c == c + 1)
- {
- s = buf;
- *s++ = '\b'; *s = 0;
- s = buf;
- }
- }
- else if (c == 0)
- {
- s = buf;
- if ((Cursor_Set != 1) || (Cursor_c != 0)) *s++ = '\r';
- while (n--) *s++ = '\n';
-#ifdef VMS
- /* Need to add this after \n to start a new record. Sheesh. */
- *s++ = '\r';
-#endif
- *s = 0;
- s = buf;
- }
- /* Will fail on VMS */
-#ifndef VMS
- else if (SLtt_Newline_Ok && (Cursor_Set == 1) &&
- (Cursor_c >= c) && (c + 3 > Cursor_c))
- {
- s = buf;
- while (n--) *s++ = '\n';
- n = Cursor_c - c;
- while (n--) *s++ = '\b';
- *s = 0;
- s = buf;
- }
-#endif
- }
- }
- if (s != NULL) tt_write_string(s);
- else tt_printf(Curs_Pos_Str, r, c);
- Cursor_c = c; Cursor_r = r;
- Cursor_Set = 1;
-}
-
-void SLtt_begin_insert (void)
-{
- tt_write_string(Ins_Mode_Str);
-}
-
-void SLtt_end_insert (void)
-{
- tt_write_string(Eins_Mode_Str);
-}
-
-void SLtt_delete_char (void)
-{
- SLtt_normal_video ();
- tt_write_string(Del_Char_Str);
-}
-
-void SLtt_erase_line (void)
-{
- tt_write_string("\r");
- Cursor_Set = 1; Cursor_c = 0;
- SLtt_del_eol();
-}
-
-/* It appears that the Linux console, and most likely others do not
- * like scrolling regions that consist of one line. So I have to
- * resort to this stupidity to make up for that stupidity.
- */
-static void delete_line_in_scroll_region (void)
-{
- SLtt_goto_rc (Cursor_r - Scroll_r1, 0);
- SLtt_del_eol ();
-}
-
-void SLtt_delete_nlines (int n)
-{
- int r1, curs;
- char buf[132];
-
- if (n <= 0) return;
- SLtt_normal_video ();
-
- if (Scroll_r1 == Scroll_r2)
- {
- delete_line_in_scroll_region ();
- return;
- }
-
- if (Del_N_Lines_Str != NULL) tt_printf(Del_N_Lines_Str,n, 0);
- else
- /* get a new terminal */
- {
- r1 = Scroll_r1;
- curs = Cursor_r;
- SLtt_set_scroll_region(curs, Scroll_r2);
- SLtt_goto_rc(Scroll_r2 - Scroll_r1, 0);
- SLMEMSET(buf, '\n', (unsigned int) n);
- tt_write(buf, (unsigned int) n);
- /* while (n--) tt_putchar('\n'); */
- SLtt_set_scroll_region(r1, Scroll_r2);
- SLtt_goto_rc(curs, 0);
- }
-}
-
-void SLtt_cls (void)
-{
- /* If the terminal is a color terminal but the user wants black and
- * white, then make sure that the colors are reset. This appears to be
- * necessary.
- */
- if ((SLtt_Use_Ansi_Colors == 0) && Is_Color_Terminal)
- {
- if (Reset_Color_String != NULL)
- tt_write_string (Reset_Color_String);
- else
- tt_write_string ("\033[0m\033[m");
- }
-
- SLtt_normal_video();
- SLtt_reset_scroll_region ();
- tt_write_string(Cls_Str);
-}
-
-void SLtt_reverse_index (int n)
-{
- if (!n) return;
-
- SLtt_normal_video();
-
- if (Scroll_r1 == Scroll_r2)
- {
- delete_line_in_scroll_region ();
- return;
- }
-
- if (Add_N_Lines_Str != NULL) tt_printf(Add_N_Lines_Str,n, 0);
- else
- {
- while(n--) tt_write_string(Rev_Scroll_Str);
- }
-}
-
-int SLtt_Ignore_Beep = 1;
-static char *Visible_Bell_Str;
-
-void SLtt_beep (void)
-{
- if (SLtt_Ignore_Beep & 0x1) SLtt_putchar('\007');
-
- if (SLtt_Ignore_Beep & 0x2)
- {
- if (Visible_Bell_Str != NULL) tt_write_string (Visible_Bell_Str);
-#ifdef __linux__
- else if (Linux_Console)
- {
- tt_write_string ("\033[?5h");
- SLtt_flush_output ();
- _SLusleep (50000);
- tt_write_string ("\033[?5l");
- }
-#endif
- }
- SLtt_flush_output ();
-}
-
-static void del_eol (void)
-{
- int c;
-
- if (Del_Eol_Str != NULL)
- {
- tt_write_string(Del_Eol_Str);
- return;
- }
-
- c = Cursor_c;
- /* Avoid writing to the lower right corner. If the terminal does not
- * have Del_Eol_Str, then it probably does not have what it takes to play
- * games with insert for for a space into that corner.
- */
- if (Cursor_r + 1 < SLtt_Screen_Rows)
- c++;
-
- while (c < SLtt_Screen_Cols)
- {
- tt_write (" ", 1);
- c++;
- }
-}
-
-void SLtt_del_eol (void)
-{
- if (Current_Fgbg != 0xFFFFFFFFU) SLtt_normal_video ();
- del_eol ();
-}
-
-typedef struct
-{
- char *name;
- SLtt_Char_Type color;
-}
-Color_Def_Type;
-
-#define MAX_COLOR_NAMES 17
-static Color_Def_Type Color_Defs [MAX_COLOR_NAMES] =
-{
- {"black", SLSMG_COLOR_BLACK},
- {"red", SLSMG_COLOR_RED},
- {"green", SLSMG_COLOR_GREEN},
- {"brown", SLSMG_COLOR_BROWN},
- {"blue", SLSMG_COLOR_BLUE},
- {"magenta", SLSMG_COLOR_MAGENTA},
- {"cyan", SLSMG_COLOR_CYAN},
- {"lightgray", SLSMG_COLOR_LGRAY},
- {"gray", SLSMG_COLOR_GRAY},
- {"brightred", SLSMG_COLOR_BRIGHT_RED},
- {"brightgreen", SLSMG_COLOR_BRIGHT_GREEN},
- {"yellow", SLSMG_COLOR_BRIGHT_BROWN},
- {"brightblue", SLSMG_COLOR_BRIGHT_BLUE},
- {"brightmagenta", SLSMG_COLOR_BRIGHT_CYAN},
- {"brightcyan", SLSMG_COLOR_BRIGHT_MAGENTA},
- {"white", SLSMG_COLOR_BRIGHT_WHITE},
-#define SLSMG_COLOR_DEFAULT 0xFF
- {"default", SLSMG_COLOR_DEFAULT}
-};
-
-void SLtt_set_mono (int obj, char *what, SLtt_Char_Type mask)
-{
- (void) what;
- if ((obj < 0) || (obj >= JMAX_COLORS))
- {
- return;
- }
- Ansi_Color_Map[obj].mono = mask & ATTR_MASK;
-}
-
-static char *check_color_for_digit_form (char *color)
-{
- unsigned int i, ich;
- char *s = color;
-
- i = 0;
- while ((ich = (int) *s) != 0)
- {
- if ((ich < '0') || (ich > '9'))
- return color;
-
- i = i * 10 + (ich - '0');
- s++;
- }
-
- if (i < MAX_COLOR_NAMES)
- color = Color_Defs[i].name;
-
- return color;
-}
-
-static int get_default_colors (char **fgp, char **bgp)
-{
- static char fg_buf[16], bg_buf[16], *bg, *fg;
- static int already_parsed;
- char *p, *pmax;
-
- if (already_parsed == -1)
- return -1;
-
- if (already_parsed)
- {
- *fgp = fg;
- *bgp = bg;
- return 0;
- }
-
- already_parsed = -1;
-
- bg = getenv ("COLORFGBG");
-
- if (bg == NULL)
- {
- bg = getenv ("DEFAULT_COLORS");
- if (bg == NULL)
- return -1;
- }
-
- p = fg_buf;
- pmax = p + (sizeof (fg_buf) - 1);
-
- while ((*bg != 0) && (*bg != ';'))
- {
- if (p < pmax) *p++ = *bg;
- bg++;
- }
- *p = 0;
-
- if (*bg) bg++;
-
- p = bg_buf;
- pmax = p + (sizeof (bg_buf) - 1);
-
- /* Mark suggested allowing for extra spplication specific stuff following
- * the background color. That is what the check for the semi-colon is for.
- */
- while ((*bg != 0) && (*bg != ';'))
- {
- if (p < pmax) *p++ = *bg;
- bg++;
- }
- *p = 0;
-
- if (!strcmp (fg_buf, "default") || !strcmp(bg_buf, "default"))
- {
- *fgp = *bgp = fg = bg = "default";
- }
- else
- {
- *fgp = fg = check_color_for_digit_form (fg_buf);
- *bgp = bg = check_color_for_digit_form (bg_buf);
- }
- already_parsed = 1;
- return 0;
-}
-
-static unsigned char FgBg_Stats[JMAX_COLORS];
-
-static int Color_0_Modified = 0;
-
-void SLtt_set_color_object (int obj, SLtt_Char_Type attr)
-{
- char *cust_esc;
-
- if ((obj < 0) || (obj >= JMAX_COLORS)) return;
-
- cust_esc = Ansi_Color_Map[obj].custom_esc;
- if (cust_esc != NULL)
- {
- SLfree (cust_esc);
- FgBg_Stats[(Ansi_Color_Map[obj].fgbg >> 8) & 0x7F] -= 1;
- Ansi_Color_Map[obj].custom_esc = NULL;
- }
-
- Ansi_Color_Map[obj].fgbg = attr;
- if (obj == 0) Color_0_Modified = 1;
-
- if (_SLtt_color_changed_hook != NULL)
- (*_SLtt_color_changed_hook)();
-}
-
-SLtt_Char_Type SLtt_get_color_object (int obj)
-{
- if ((obj < 0) || (obj >= JMAX_COLORS)) return 0;
- return Ansi_Color_Map[obj].fgbg;
-}
-
-void SLtt_add_color_attribute (int obj, SLtt_Char_Type attr)
-{
- if ((obj < 0) || (obj >= JMAX_COLORS)) return;
-
- Ansi_Color_Map[obj].fgbg |= (attr & ATTR_MASK);
- if (obj == 0) Color_0_Modified = 1;
- if (_SLtt_color_changed_hook != NULL)
- (*_SLtt_color_changed_hook)();
-}
-
-static SLtt_Char_Type fb_to_fgbg (SLtt_Char_Type f, SLtt_Char_Type b)
-{
- SLtt_Char_Type attr;
-
- if (Max_Terminfo_Colors != 8)
- {
- if (f != SLSMG_COLOR_DEFAULT) f %= Max_Terminfo_Colors;
- if (b != SLSMG_COLOR_DEFAULT) b %= Max_Terminfo_Colors;
- return ((f << 8) | (b << 16));
- }
-
- /* Otherwise we have 8 ansi colors. Try to get bright versions
- * by using the BOLD and BLINK attributes.
- */
-
- attr = 0;
-
- /* Note: If f represents default, it will have the value 0xFF */
- if (f != SLSMG_COLOR_DEFAULT)
- {
- if (f & 0x8) attr = SLTT_BOLD_MASK;
- f &= 0x7;
- }
-
- if (b != SLSMG_COLOR_DEFAULT)
- {
- if (b & 0x8) attr |= SLTT_BLINK_MASK;
- b &= 0x7;
- }
-
- return ((f << 8) | (b << 16) | attr);
-}
-
-/* This looks for colors with name form 'colorN'. If color is of this
- * form, N is passed back via paramter list.
- */
-static int parse_color_digit_name (char *color, SLtt_Char_Type *f)
-{
- unsigned int i;
- unsigned char ch;
-
- if (strncmp (color, "color", 5))
- return -1;
-
- color += 5;
- if (*color == 0)
- return -1;
-
- i = 0;
- while (1)
- {
- ch = (unsigned char) *color++;
- if (ch == 0)
- break;
- if ((ch > '9') || (ch < '0'))
- return -1;
- i = 10 * i + (ch - '0');
- }
-
- *f = (SLtt_Char_Type) i;
- return 0;
-}
-
-static int make_color_fgbg (char *fg, char *bg, SLtt_Char_Type *fgbg)
-{
- SLtt_Char_Type f = 0xFFFFFFFFU, b = 0xFFFFFFFFU;
- char *dfg, *dbg;
- unsigned int i;
-
- if ((fg != NULL) && (*fg == 0)) fg = NULL;
- if ((bg != NULL) && (*bg == 0)) bg = NULL;
-
- if ((fg == NULL) || (bg == NULL))
- {
- if (-1 == get_default_colors (&dfg, &dbg))
- return -1;
-
- if (fg == NULL) fg = dfg;
- if (bg == NULL) bg = dbg;
- }
-
- if (-1 == parse_color_digit_name (fg, &f))
- {
- for (i = 0; i < MAX_COLOR_NAMES; i++)
- {
- if (strcmp(fg, Color_Defs[i].name)) continue;
- f = Color_Defs[i].color;
- break;
- }
- }
-
- if (-1 == parse_color_digit_name (bg, &b))
- {
- for (i = 0; i < MAX_COLOR_NAMES; i++)
- {
- if (strcmp(bg, Color_Defs[i].name)) continue;
- b = Color_Defs[i].color;
- break;
- }
- }
-
- if ((f == 0xFFFFFFFFU) || (b == 0xFFFFFFFFU))
- return -1;
-
- *fgbg = fb_to_fgbg (f, b);
- return 0;
-}
-
-void SLtt_set_color (int obj, char *what, char *fg, char *bg)
-{
- SLtt_Char_Type fgbg;
-
- (void) what;
- if ((obj < 0) || (obj >= JMAX_COLORS))
- return;
-
- if (-1 != make_color_fgbg (fg, bg, &fgbg))
- SLtt_set_color_object (obj, fgbg);
-}
-
-void SLtt_set_color_fgbg (int obj, SLtt_Char_Type f, SLtt_Char_Type b)
-{
- SLtt_set_color_object (obj, fb_to_fgbg (f, b));
-}
-
-void SLtt_set_color_esc (int obj, char *esc)
-{
- char *cust_esc;
- SLtt_Char_Type fgbg = 0;
- int i;
-
- if ((obj < 0) || (obj >= JMAX_COLORS))
- {
- return;
- }
-
- cust_esc = Ansi_Color_Map[obj].custom_esc;
- if (cust_esc != NULL)
- {
- SLfree (cust_esc);
- FgBg_Stats[(Ansi_Color_Map[obj].fgbg >> 8) & 0x7F] -= 1;
- }
-
- cust_esc = (char *) SLmalloc (strlen(esc) + 1);
- if (cust_esc != NULL) strcpy (cust_esc, esc);
-
- Ansi_Color_Map[obj].custom_esc = cust_esc;
- if (cust_esc == NULL) fgbg = 0;
- else
- {
- /* The whole point of this is to generate a unique fgbg */
- for (i = 0; i < JMAX_COLORS; i++)
- {
- if (FgBg_Stats[i] == 0) fgbg = i;
-
- if (obj == i) continue;
- if ((Ansi_Color_Map[i].custom_esc) == NULL) continue;
- if (!strcmp (Ansi_Color_Map[i].custom_esc, cust_esc))
- {
- fgbg = (Ansi_Color_Map[i].fgbg >> 8) & 0x7F;
- break;
- }
- }
- FgBg_Stats[fgbg] += 1;
- }
-
- fgbg |= 0x80;
- Ansi_Color_Map[obj].fgbg = (fgbg | (fgbg << 8)) << 8;
- if (obj == 0) Color_0_Modified = 1;
- if (_SLtt_color_changed_hook != NULL)
- (*_SLtt_color_changed_hook)();
-}
-
-void SLtt_set_alt_char_set (int i)
-{
- static int last_i;
- if (SLtt_Has_Alt_Charset == 0) return;
- if (i == last_i) return;
- tt_write_string (i ? Start_Alt_Chars_Str : End_Alt_Chars_Str );
- last_i = i;
-}
-
-static void write_attributes (SLtt_Char_Type fgbg)
-{
- int bg0, fg0;
- int unknown_attributes;
-
- if (Worthless_Highlight) return;
- if (fgbg == Current_Fgbg) return;
-
- unknown_attributes = 0;
-
- /* Before spitting out colors, fix attributes */
- if ((fgbg & ATTR_MASK) != (Current_Fgbg & ATTR_MASK))
- {
- if (Current_Fgbg & ATTR_MASK)
- {
- tt_write_string(Norm_Vid_Str);
- /* In case normal video turns off ALL attributes: */
- if (fgbg & SLTT_ALTC_MASK)
- Current_Fgbg &= ~SLTT_ALTC_MASK;
- SLtt_set_alt_char_set (0);
- }
-
- if ((fgbg & SLTT_ALTC_MASK)
- != (Current_Fgbg & SLTT_ALTC_MASK))
- {
- SLtt_set_alt_char_set ((int) (fgbg & SLTT_ALTC_MASK));
- }
-
- if (fgbg & SLTT_ULINE_MASK) tt_write_string (UnderLine_Vid_Str);
- if (fgbg & SLTT_BOLD_MASK) SLtt_bold_video ();
- if (fgbg & SLTT_REV_MASK) tt_write_string (Rev_Vid_Str);
- if (fgbg & SLTT_BLINK_MASK)
- {
- /* Someday Linux will have a blink mode that set high intensity
- * background. Lets be prepared.
- */
- if (SLtt_Blink_Mode) tt_write_string (Blink_Vid_Str);
- }
- unknown_attributes = 1;
- }
-
- if (SLtt_Use_Ansi_Colors)
- {
- fg0 = (int) GET_FG(fgbg);
- bg0 = (int) GET_BG(fgbg);
-
- if (unknown_attributes
- || (fg0 != (int)GET_FG(Current_Fgbg)))
- {
- if (fg0 == SLSMG_COLOR_DEFAULT)
- tt_write_string (Default_Color_Fg_Str);
- else
- tt_printf (Color_Fg_Str, fg0, 0);
- }
-
- if (unknown_attributes
- || (bg0 != (int)GET_BG(Current_Fgbg)))
- {
- if (bg0 == SLSMG_COLOR_DEFAULT)
- tt_write_string (Default_Color_Bg_Str);
- else
- tt_printf (Color_Bg_Str, bg0, 0);
- }
- }
-
- Current_Fgbg = fgbg;
-}
-
-static int Video_Initialized;
-
-void SLtt_reverse_video (int color)
-{
- SLtt_Char_Type fgbg;
- char *esc;
-
- if (Worthless_Highlight) return;
- if ((color < 0) || (color >= JMAX_COLORS)) return;
-
- if (Video_Initialized == 0)
- {
- if (color == JNORMAL_COLOR)
- {
- tt_write_string (Norm_Vid_Str);
- }
- else tt_write_string (Rev_Vid_Str);
- Current_Fgbg = 0xFFFFFFFFU;
- return;
- }
-
- if (SLtt_Use_Ansi_Colors)
- {
- fgbg = Ansi_Color_Map[color].fgbg;
- if ((esc = Ansi_Color_Map[color].custom_esc) != NULL)
- {
- if (fgbg != Current_Fgbg)
- {
- Current_Fgbg = fgbg;
- tt_write_string (esc);
- return;
- }
- }
- }
- else fgbg = Ansi_Color_Map[color].mono;
-
- if (fgbg == Current_Fgbg) return;
- write_attributes (fgbg);
-}
-
-void SLtt_normal_video (void)
-{
- SLtt_reverse_video(JNORMAL_COLOR);
-}
-
-void SLtt_narrow_width (void)
-{
- tt_write_string("\033[?3l");
-}
-
-void SLtt_wide_width (void)
-{
- tt_write_string("\033[?3h");
-}
-
-/* Highest bit represents the character set. */
-#define COLOR_MASK 0x7F00
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-static int bce_color_eqs (unsigned int a, unsigned int b)
-{
- a = (a & COLOR_MASK) >> 8;
- b = (b & COLOR_MASK) >> 8;
-
- if (a == b)
- return 1;
-
- if (SLtt_Use_Ansi_Colors == 0)
- return Ansi_Color_Map[a].mono == Ansi_Color_Map[b].mono;
-
- if (Bce_Color_Offset == 0)
- return Ansi_Color_Map[a].fgbg == Ansi_Color_Map[b].fgbg;
-
- /* If either are color 0, then we do not know what that means since the
- * terminal does not support BCE */
- if ((a == 0) || (b == 0))
- return 0;
-
- return Ansi_Color_Map[a-1].fgbg == Ansi_Color_Map[b-1].fgbg;
-}
-#define COLOR_EQS(a,b) bce_color_eqs (a,b)
-#else
-# define COLOR_OF(x) (((unsigned int)(x) & COLOR_MASK) >> 8)
-# define COLOR_EQS(a, b) \
- (SLtt_Use_Ansi_Colors \
- ? (Ansi_Color_Map[COLOR_OF(a)].fgbg == Ansi_Color_Map[COLOR_OF(b)].fgbg)\
- : (Ansi_Color_Map[COLOR_OF(a)].mono == Ansi_Color_Map[COLOR_OF(b)].mono))
-#endif
-
-#define CHAR_EQS(a, b) (((a) == (b))\
- || ((((a) & ~COLOR_MASK) == ((b) & ~COLOR_MASK))\
- && COLOR_EQS((a), (b))))
-
-/* The whole point of this routine is to prevent writing to the last column
- * and last row on terminals with automatic margins.
- */
-static void write_string_with_care (char *str)
-{
- unsigned int len;
-
- if (str == NULL) return;
-
- len = strlen (str);
- if (Automatic_Margins && (Cursor_r + 1 == SLtt_Screen_Rows))
- {
- if (len + (unsigned int) Cursor_c >= (unsigned int) SLtt_Screen_Cols)
- {
- /* For now, just do not write there. Later, something more
- * sophisticated will be implemented.
- */
- if (SLtt_Screen_Cols > Cursor_c)
- len = SLtt_Screen_Cols - Cursor_c - 1;
- else
- len = 0;
- }
- }
- tt_write (str, len);
-}
-
-static void send_attr_str (SLsmg_Char_Type *s)
-{
- unsigned char out[256], ch, *p;
- register SLtt_Char_Type attr;
- register SLsmg_Char_Type sh;
- int color, last_color = -1;
-
- p = out;
- while (0 != (sh = *s++))
- {
- ch = sh & 0xFF;
- color = ((int) sh & 0xFF00) >> 8;
-
-#if SLTT_HAS_NON_BCE_SUPPORT
- if (Bce_Color_Offset
- && (color >= Bce_Color_Offset))
- color -= Bce_Color_Offset;
-#endif
-
- if (color != last_color)
- {
- if (SLtt_Use_Ansi_Colors) attr = Ansi_Color_Map[color & 0x7F].fgbg;
- else attr = Ansi_Color_Map[color & 0x7F].mono;
-
- if (sh & 0x8000) /* alternate char set */
- {
- if (SLtt_Use_Blink_For_ACS)
- {
- if (SLtt_Blink_Mode) attr |= SLTT_BLINK_MASK;
- }
- else attr |= SLTT_ALTC_MASK;
- }
-
- if (attr != Current_Fgbg)
- {
- if ((ch != ' ') ||
- /* it is a space so only consider it different if it
- * has different attributes.
- */
- (attr & BGALL_MASK) != (Current_Fgbg & BGALL_MASK))
- {
- if (p != out)
- {
- *p = 0;
- write_string_with_care ((char *) out);
- Cursor_c += (int) (p - out);
- p = out;
- }
-
- if (SLtt_Use_Ansi_Colors && (NULL != Ansi_Color_Map[color & 0x7F].custom_esc))
- {
- tt_write_string (Ansi_Color_Map[color & 0x7F].custom_esc);
- /* Just in case the custom escape sequence screwed up
- * the alt character set state...
- */
- if ((attr & SLTT_ALTC_MASK) != (Current_Fgbg & SLTT_ALTC_MASK))
- SLtt_set_alt_char_set ((int) (attr & SLTT_ALTC_MASK));
- Current_Fgbg = attr;
- }
- else write_attributes (attr);
-
- last_color = color;
- }
- }
- }
- *p++ = ch;
- }
- *p = 0;
- if (p != out) write_string_with_care ((char *) out);
- Cursor_c += (int) (p - out);
-}
-
-static void forward_cursor (unsigned int n, int row)
-{
- char buf [1024];
-
- if (n <= 4)
- {
- SLtt_normal_video ();
- SLMEMSET (buf, ' ', n);
- buf[n] = 0;
- write_string_with_care (buf);
- Cursor_c += n;
- }
- else if (Curs_F_Str != NULL)
- {
- Cursor_c += n;
- n = tt_sprintf(buf, Curs_F_Str, (int) n, 0);
- tt_write(buf, n);
- }
- else SLtt_goto_rc (row, (int) (Cursor_c + n));
-}
-
-
-void SLtt_smart_puts(SLsmg_Char_Type *neww, SLsmg_Char_Type *oldd, int len, int row)
-{
- register SLsmg_Char_Type *p, *q, *qmax, *pmax, *buf;
- SLsmg_Char_Type buffer[256];
- unsigned int n_spaces;
- SLsmg_Char_Type *space_match, *last_buffered_match;
-#ifdef HP_GLITCH_CODE
- int handle_hp_glitch = 0;
-#endif
- SLsmg_Char_Type space_char;
-#define SLTT_USE_INSERT_HACK 1
-#if SLTT_USE_INSERT_HACK
- SLsmg_Char_Type insert_hack_prev = 0;
- SLsmg_Char_Type insert_hack_char = 0;
-
- if ((row + 1 == SLtt_Screen_Rows)
- && (len == SLtt_Screen_Cols)
- && (len > 1)
- && (SLtt_Term_Cannot_Insert == 0)
- && Automatic_Margins)
- {
- insert_hack_char = neww[len-1];
- if (oldd[len-1] == insert_hack_char)
- insert_hack_char = 0;
- else
- insert_hack_prev = neww[len-2];
- }
-#endif
-
- q = oldd; p = neww;
- qmax = oldd + len;
- pmax = p + len;
-
- /* Find out where to begin --- while they match, we are ok */
- while (1)
- {
- if (q == qmax) return;
-#if SLANG_HAS_KANJI_SUPPORT
- if (*p & 0x80)
- { /* new is kanji */
- if ((*q & 0x80) && ((q + 1) < qmax))
- { /* old is also kanji */
- if (((0xFF & *q) != (0xFF & *p))
- || ((0xFF & q[1]) != (0xFF & p[1])))
- break; /* both kanji, but not match */
-
- else
- { /* kanji match ! */
- if (!COLOR_EQS(*q, *p)) break;
- q++; p++;
- if (!COLOR_EQS(*q, *p)) break;
- /* really match! */
- q++; p++;
- continue;
- }
- }
- else break; /* old is not kanji */
- }
- else
- { /* new is not kanji */
- if (*q & 0x80) break; /* old is kanji */
- }
-#endif
- if (!CHAR_EQS(*q, *p)) break;
- q++; p++;
- }
-
-#ifdef HP_GLITCH_CODE
- if (Has_HP_Glitch)
- {
- SLsmg_Char_Type *qq = q;
-
- SLtt_goto_rc (row, (int) (p - neww));
-
- while (qq < qmax)
- {
- if (*qq & 0xFF00)
- {
- SLtt_normal_video ();
- SLtt_del_eol ();
- qmax = q;
- handle_hp_glitch = 1;
- break;
- }
- qq++;
- }
- }
-#endif
- /* Find where the last non-blank character on old/new screen is */
-
- space_char = ' ';
- if ((*(pmax-1) & 0xFF) == ' ')
- {
- /* If we get here, then we can erase to the end of the line to create
- * the final space. However, this will only work _if_ erasing will
- * get us the correct color. If the terminal supports BCE, then this
- * is easy. If it does not, then we can only perform this operation
- * if the color is known via something like COLORFGBG. For now,
- * I just will not perform the optimization for such terminals.
- */
- if ((Can_Background_Color_Erase)
- && SLtt_Use_Ansi_Colors)
- space_char = *(pmax - 1);
-
- while (pmax > p)
- {
- pmax--;
- if (!CHAR_EQS(*pmax, space_char))
- {
- pmax++;
- break;
- }
- }
- }
-
- while (qmax > q)
- {
- qmax--;
- if (!CHAR_EQS(*qmax, space_char))
- {
- qmax++;
- break;
- }
- }
-
- last_buffered_match = buf = buffer; /* buffer is empty */
-
-#ifdef HP_GLITCH_CODE
- if (handle_hp_glitch)
- {
- while (p < pmax)
- {
- *buf++ = *p++;
- }
- }
-#endif
-
-#ifdef HP_GLITCH_CODE
- if (Has_HP_Glitch == 0)
- {
-#endif
- /* Try use use erase to bol if possible */
- if ((Del_Bol_Str != NULL) && ((*neww & 0xFF) == 32))
- {
- SLsmg_Char_Type *p1;
- SLsmg_Char_Type blank;
-
- p1 = neww;
- if ((Can_Background_Color_Erase)
- && SLtt_Use_Ansi_Colors)
- blank = *p1;
- /* black+white attributes do not support bce */
- else
- blank = 32;
-
- while ((p1 < pmax) && (CHAR_EQS (*p1, blank)))
- p1++;
-
- /* Is this optimization worth it? Assume Del_Bol_Str is ESC [ 1 K
- * It costs 4 chars + the space needed to properly position the
- * cursor, e.g., ESC [ 10;10H. So, it costs at least 13 characters.
- */
- if ((p1 > neww + 13)
- && (p1 >= p)
- /* Avoid erasing from the end of the line */
- && ((p1 != pmax) || (pmax < neww + len)))
- {
- int ofs = (int) (p1 - neww);
- q = oldd + ofs;
- p = p1;
- SLtt_goto_rc (row, ofs - 1);
- SLtt_reverse_video (blank >> 8);
- tt_write_string (Del_Bol_Str);
- tt_write (" ", 1);
- Cursor_c += 1;
- }
- else
- SLtt_goto_rc (row, (int) (p - neww));
- }
- else
- SLtt_goto_rc (row, (int) (p - neww));
-#ifdef HP_GLITCH_CODE
- }
-#endif
-
-
- /* loop using overwrite then skip algorithm until done */
- while (1)
- {
- /* while they do not match and we do not hit a space, buffer them up */
- n_spaces = 0;
- while (p < pmax)
- {
- if (CHAR_EQS(*q, 32) && CHAR_EQS(*p, 32))
- {
- /* If *q is not a space, we would have to overwrite it.
- * However, if *q is a space, then while *p is also one,
- * we only need to skip over the blank field.
- */
- space_match = p;
- p++; q++;
- while ((p < pmax)
- && CHAR_EQS(*q, 32)
- && CHAR_EQS(*p, 32))
- {
- p++;
- q++;
- }
- n_spaces = (unsigned int) (p - space_match);
- break;
- }
-#if SLANG_HAS_KANJI_SUPPORT
- if ((*p & 0x80) && ((p + 1) < pmax))
- { /* new is kanji */
- if (*q & 0x80)
- { /* old is also kanji */
- if (((0xFF & *q) != (0xFF & *p))
- || ((0xFF & q[1]) != (0xFF & p[1])))
- {
- /* both kanji, but not match */
- *buf++ = *p++;
- *buf++ = *p++;
- q += 2;
- continue;
- }
- else
- { /* kanji match ? */
- if (!COLOR_EQS(*q, *p) || !COLOR_EQS(*(q+1), *(p+1)))
- {
- /* code is match, but color is diff */
- *buf++ = *p++;
- *buf++ = *p++;
- q += 2;
- continue;
- }
- /* really match ! */
- break;
- }
- }
- else
- { /* old is not kanji */
- *buf++ = *p++;
- *buf++ = *p++;
- q += 2;
- continue;
- }
- }
- else
- { /* new is not kanji */
- if (*q & 0x80)
- { /* old is kanji */
- *buf++ = *p++;
- q++;
- continue;
- }
- }
-#endif
-
- if (CHAR_EQS(*q, *p)) break;
- *buf++ = *p++;
- q++;
- }
- *buf = 0;
-
- if (buf != buffer) send_attr_str (buffer);
- buf = buffer;
-
- if (n_spaces
- && ((p < pmax) /* erase to eol will achieve this effect*/
- || (space_char != 32)))/* unless space_char is not a simple space */
- {
- forward_cursor (n_spaces, row);
- }
-
- /* Now we overwrote what we could and cursor is placed at position
- * of a possible match of new and old. If this is the case, skip
- * some more.
- */
-#if !SLANG_HAS_KANJI_SUPPORT
- while ((p < pmax) && CHAR_EQS(*p, *q))
- {
- *buf++ = *p++;
- q++;
- }
-#else
- /* Kanji */
- while (p < pmax)
- {
- if ((*p & 0x80) && ((p + 1) < pmax))
- { /* new is kanji */
- if (*q & 0x80)
- { /* old is also kanji */
- if (((0xFF & *q) == (0xFF & *p))
- && ((0xFF & q[1]) == (0xFF & p[1])))
- {
- /* kanji match ? */
- if (!COLOR_EQS(*q, *p)
- || !COLOR_EQS(q[1], p[1]))
- break;
-
- *buf++ = *p++;
- q++;
- if (p >= pmax)
- {
- *buf++ = 32;
- p++;
- break;
- }
- else
- {
- *buf++ = *p++;
- q++;
- continue;
- }
- }
- else break; /* both kanji, but not match */
- }
- else break; /* old is not kanji */
- }
- else
- { /* new is not kanji */
- if (*q & 0x80) break; /* old is kanji */
- if (!CHAR_EQS(*q, *p)) break;
- *buf++ = *p++;
- q++;
- }
- }
-#endif
- last_buffered_match = buf;
- if (p >= pmax) break;
-
- /* jump to new position is it is greater than 5 otherwise
- * let it sit in the buffer and output it later.
- */
- if ((int) (buf - buffer) >= 5)
- {
- forward_cursor ((unsigned int) (buf - buffer), row);
- last_buffered_match = buf = buffer;
- }
- }
-
- if (buf != buffer)
- {
- if (q < qmax)
- {
- if ((buf == last_buffered_match)
- && ((int) (buf - buffer) >= 5))
- {
- forward_cursor ((unsigned int) (buf - buffer), row);
- }
- else
- {
- *buf = 0;
- send_attr_str (buffer);
- }
- }
- }
-
- if (q < qmax)
- {
- SLtt_reverse_video (space_char >> 8);
- del_eol ();
- }
-
-#if SLTT_USE_INSERT_HACK
- else if (insert_hack_char)
- {
- SLtt_goto_rc (SLtt_Screen_Rows-1, SLtt_Screen_Cols-2);
- buffer[0] = insert_hack_char;
- buffer[1] = 0;
- send_attr_str (buffer);
- SLtt_goto_rc (SLtt_Screen_Rows-1, SLtt_Screen_Cols-2);
- buffer[0] = insert_hack_prev;
- SLtt_begin_insert ();
- send_attr_str (buffer);
- SLtt_end_insert ();
- }
-#endif
-
- if (Automatic_Margins && (Cursor_c + 1 >= SLtt_Screen_Cols)) Cursor_Set = 0;
-}
-
-static void get_color_info (void)
-{
- char *fg, *bg;
-
- /* Allow easy mechanism to override inadequate termcap/terminfo files. */
- if (SLtt_Use_Ansi_Colors == 0)
- SLtt_Use_Ansi_Colors = (NULL != getenv ("COLORTERM"));
-
- if (SLtt_Use_Ansi_Colors)
- Is_Color_Terminal = 1;
-
-#if SLTT_HAS_NON_BCE_SUPPORT
- if (Can_Background_Color_Erase == 0)
- Can_Background_Color_Erase = (NULL != getenv ("COLORTERM_BCE"));
-#endif
-
- if (-1 == get_default_colors (&fg, &bg))
- return;
-
- /* Check to see if application has already set them. */
- if (Color_0_Modified)
- return;
-
- SLtt_set_color (0, NULL, fg, bg);
- SLtt_set_color (1, NULL, bg, fg);
-}
-
-/* termcap stuff */
-
-#ifdef __unix__
-
-static int Termcap_Initalized = 0;
-
-#ifdef USE_TERMCAP
-/* Termcap based system */
-static char Termcap_Buf[4096];
-static char Termcap_String_Buf[4096];
-static char *Termcap_String_Ptr;
-extern char *tgetstr(char *, char **);
-extern int tgetent(char *, char *);
-extern int tgetnum(char *);
-extern int tgetflag(char *);
-#else
-/* Terminfo */
-static SLterminfo_Type *Terminfo;
-#endif
-
-#define TGETFLAG(x) (SLtt_tgetflag(x) > 0)
-
-static char *fixup_tgetstr (char *what)
-{
- register char *w, *w1;
- char *wsave;
-
- if (what == NULL)
- return NULL;
-
- /* Check for AIX brain-damage */
- if (*what == '@')
- return NULL;
-
- /* lose pad info --- with today's technology, term is a loser if
- it is really needed */
- while ((*what == '.') ||
- ((*what >= '0') && (*what <= '9'))) what++;
- if (*what == '*') what++;
-
- /* lose terminfo padding--- looks like $<...> */
- w = what;
- while (*w) if ((*w++ == '$') && (*w == '<'))
- {
- w1 = w - 1;
- while (*w && (*w != '>')) w++;
- if (*w == 0) break;
- w++;
- wsave = w1;
- while ((*w1++ = *w++) != 0);
- w = wsave;
- }
-
- if (*what == 0) what = NULL;
- return what;
-}
-
-char *SLtt_tgetstr (char *s)
-{
- if (Termcap_Initalized == 0)
- return NULL;
-
-#ifdef USE_TERMCAP
- s = tgetstr (s, &Termcap_String_Ptr);
-#else
- s = _SLtt_tigetstr (Terminfo, s);
-#endif
- return fixup_tgetstr (s);
-}
-
-int SLtt_tgetnum (char *s)
-{
- if (Termcap_Initalized == 0)
- return -1;
-#ifdef USE_TERMCAP
- return tgetnum (s);
-#else
- return _SLtt_tigetnum (Terminfo, s);
-#endif
-}
-
-int SLtt_tgetflag (char *s)
-{
- if (Termcap_Initalized == 0)
- return -1;
-#ifdef USE_TERMCAP
- return tgetflag (s);
-#else
- return _SLtt_tigetflag (Terminfo, s);
-#endif
-}
-
-static int Vt100_Like = 0;
-
-void SLtt_get_terminfo (void)
-{
- char *term;
- int status;
-
- term = getenv ("TERM");
- if (term == NULL)
- SLang_exit_error("TERM environment variable needs set.");
-
- if (0 == (status = SLtt_initialize (term)))
- return;
-
- if (status == -1)
- {
- SLang_exit_error ("Unknown terminal: %s\n\
-Check the TERM environment variable.\n\
-Also make sure that the terminal is defined in the terminfo database.\n\
-Alternatively, set the TERMCAP environment variable to the desired\n\
-termcap entry.",
- term);
- }
-
- if (status == -2)
- {
- SLang_exit_error ("\
-Your terminal lacks the ability to clear the screen or position the cursor.\n");
- }
-}
-
-/* Returns 0 if all goes well, -1 if terminal capabilities cannot be deduced,
- * or -2 if terminal cannot position the cursor.
- */
-int SLtt_initialize (char *term)
-{
- char *t, ch;
- int is_xterm;
- int almost_vtxxx;
-
- if (SLang_TT_Write_FD == -1)
- {
- /* Apparantly, this cannot fail according to the man pages. */
- SLang_TT_Write_FD = fileno (stdout);
- }
-
- if (term == NULL)
- {
- term = getenv ("TERM");
- if (term == NULL)
- return -1;
- }
-
- Linux_Console = (!strncmp (term, "linux", 5)
-# ifdef linux
- || !strncmp(term, "con", 3)
-# endif
- );
-
- t = term;
-
- if (strcmp(t, "vt52") && (*t++ == 'v') && (*t++ == 't')
- && (ch = *t, (ch >= '1') && (ch <= '9'))) Vt100_Like = 1;
-
- is_xterm = ((0 == strncmp (term, "xterm", 5))
- || (0 == strncmp (term, "rxvt", 4))
- || (0 == strncmp (term, "Eterm", 5)));
-
- almost_vtxxx = (Vt100_Like
- || Linux_Console
- || is_xterm
- || !strcmp (term, "screen"));
-
-# ifndef USE_TERMCAP
- if (NULL == (Terminfo = _SLtt_tigetent (term)))
- {
- if (almost_vtxxx) /* Special cases. */
- {
- int vt102 = 1;
- if (!strcmp (term, "vt100")) vt102 = 0;
- get_color_info ();
- SLtt_set_term_vtxxx (&vt102);
- return 0;
- }
- return -1;
- }
-# else /* USE_TERMCAP */
- if (1 != tgetent(Termcap_Buf, term))
- return -1;
- Termcap_String_Ptr = Termcap_String_Buf;
-# endif /* NOT USE_TERMCAP */
-
- Termcap_Initalized = 1;
-
- Cls_Str = SLtt_tgetstr ("cl");
- Curs_Pos_Str = SLtt_tgetstr ("cm");
-
- if ((NULL == (Ins_Mode_Str = SLtt_tgetstr("im")))
- || ( NULL == (Eins_Mode_Str = SLtt_tgetstr("ei")))
- || ( NULL == (Del_Char_Str = SLtt_tgetstr("dc"))))
- SLtt_Term_Cannot_Insert = 1;
-
- Visible_Bell_Str = SLtt_tgetstr ("vb");
- Curs_Up_Str = SLtt_tgetstr ("up");
- Rev_Scroll_Str = SLtt_tgetstr("sr");
- Del_N_Lines_Str = SLtt_tgetstr("DL");
- Add_N_Lines_Str = SLtt_tgetstr("AL");
-
- /* Actually these are used to initialize terminals that use cursor
- * addressing. Hard to believe.
- */
- Term_Init_Str = SLtt_tgetstr ("ti");
- Term_Reset_Str = SLtt_tgetstr ("te");
-
- /* If I do this for vtxxx terminals, arrow keys start sending ESC O A,
- * which I do not want. This is mainly for HP terminals.
- */
- if ((almost_vtxxx == 0) || SLtt_Force_Keypad_Init)
- {
- Keypad_Init_Str = SLtt_tgetstr ("ks");
- Keypad_Reset_Str = SLtt_tgetstr ("ke");
- }
-
- /* Make up for defective termcap/terminfo databases */
- if ((Vt100_Like && (term[2] != '1'))
- || Linux_Console
- || is_xterm
- )
- {
- if (Del_N_Lines_Str == NULL) Del_N_Lines_Str = "\033[%dM";
- if (Add_N_Lines_Str == NULL) Add_N_Lines_Str = "\033[%dL";
- }
-
- Scroll_R_Str = SLtt_tgetstr("cs");
-
- SLtt_get_screen_size ();
-
- if ((Scroll_R_Str == NULL)
- || (((NULL == Del_N_Lines_Str) || (NULL == Add_N_Lines_Str))
- && (NULL == Rev_Scroll_Str)))
- {
- if (is_xterm
- || Linux_Console
- )
- {
- /* Defective termcap mode!!!! */
- SLtt_set_term_vtxxx (NULL);
- }
- else SLtt_Term_Cannot_Scroll = 1;
- }
-
- Del_Eol_Str = SLtt_tgetstr("ce");
- Del_Bol_Str = SLtt_tgetstr("cb");
- if (is_xterm && (Del_Bol_Str == NULL))
- Del_Bol_Str = "\033[1K";
- if (is_xterm && (Del_Eol_Str == NULL))
- Del_Bol_Str = "\033[K";
-
- Rev_Vid_Str = SLtt_tgetstr("mr");
- if (Rev_Vid_Str == NULL) Rev_Vid_Str = SLtt_tgetstr("so");
-
- Bold_Vid_Str = SLtt_tgetstr("md");
-
- /* Although xterm cannot blink, it does display the blinking characters
- * as bold ones. Some Rxvt will display the background as high intensity.
- */
- if ((NULL == (Blink_Vid_Str = SLtt_tgetstr("mb")))
- && is_xterm)
- Blink_Vid_Str = "\033[5m";
-
- UnderLine_Vid_Str = SLtt_tgetstr("us");
-
- Start_Alt_Chars_Str = SLtt_tgetstr ("as"); /* smacs */
- End_Alt_Chars_Str = SLtt_tgetstr ("ae"); /* rmacs */
- Enable_Alt_Char_Set = SLtt_tgetstr ("eA"); /* enacs */
- SLtt_Graphics_Char_Pairs = SLtt_tgetstr ("ac");
-
- if (NULL == SLtt_Graphics_Char_Pairs)
- {
- /* make up for defective termcap/terminfo */
- if (Vt100_Like)
- {
- Start_Alt_Chars_Str = "\016";
- End_Alt_Chars_Str = "\017";
- Enable_Alt_Char_Set = "\033)0";
- }
- }
-
- /* aixterm added by willi */
- if (is_xterm || !strncmp (term, "aixterm", 7))
- {
- Start_Alt_Chars_Str = "\016";
- End_Alt_Chars_Str = "\017";
- Enable_Alt_Char_Set = "\033(B\033)0";
- }
-
- if ((SLtt_Graphics_Char_Pairs == NULL) &&
- ((Start_Alt_Chars_Str == NULL) || (End_Alt_Chars_Str == NULL)))
- {
- SLtt_Has_Alt_Charset = 0;
- Enable_Alt_Char_Set = NULL;
- }
- else SLtt_Has_Alt_Charset = 1;
-
-#ifdef AMIGA
- Enable_Alt_Char_Set = Start_Alt_Chars_Str = End_Alt_Chars_Str = NULL;
-#endif
-
- /* status line capabilities */
- if ((SLtt_Has_Status_Line == -1)
- && (0 != (SLtt_Has_Status_Line = TGETFLAG ("hs"))))
- {
- Disable_Status_line_Str = SLtt_tgetstr ("ds");
- Return_From_Status_Line_Str = SLtt_tgetstr ("fs");
- Goto_Status_Line_Str = SLtt_tgetstr ("ts");
- /* Status_Line_Esc_Ok = TGETFLAG("es"); */
- Num_Status_Line_Columns = SLtt_tgetnum ("ws");
- if (Num_Status_Line_Columns < 0) Num_Status_Line_Columns = 0;
- }
-
- if (NULL == (Norm_Vid_Str = SLtt_tgetstr("me")))
- {
- Norm_Vid_Str = SLtt_tgetstr("se");
- }
-
- Cursor_Invisible_Str = SLtt_tgetstr("vi");
- Cursor_Visible_Str = SLtt_tgetstr("ve");
-
- Curs_F_Str = SLtt_tgetstr("RI");
-
-# if 0
- if (NULL != Curs_F_Str)
- {
- Len_Curs_F_Str = strlen(Curs_F_Str);
- }
- else Len_Curs_F_Str = strlen(Curs_Pos_Str);
-# endif
-
- Automatic_Margins = TGETFLAG ("am");
- /* No_Move_In_Standout = !TGETFLAG ("ms"); */
-# ifdef HP_GLITCH_CODE
- Has_HP_Glitch = TGETFLAG ("xs");
-# else
- Worthless_Highlight = TGETFLAG ("xs");
-# endif
-
- if (Worthless_Highlight == 0)
- { /* Magic cookie glitch */
- Worthless_Highlight = (SLtt_tgetnum ("sg") > 0);
- }
-
- if (Worthless_Highlight)
- SLtt_Has_Alt_Charset = 0;
-
- Reset_Color_String = SLtt_tgetstr ("op");
- Color_Fg_Str = SLtt_tgetstr ("AF"); /* ANSI setaf */
- Color_Bg_Str = SLtt_tgetstr ("AB"); /* ANSI setbf */
- if ((Color_Fg_Str == NULL) || (Color_Bg_Str == NULL))
- {
- Color_Fg_Str = SLtt_tgetstr ("Sf"); /* setf */
- Color_Bg_Str = SLtt_tgetstr ("Sb"); /* setb */
- }
-
- if ((Max_Terminfo_Colors = SLtt_tgetnum ("Co")) < 0)
- Max_Terminfo_Colors = 8;
-
- if ((Color_Bg_Str != NULL) && (Color_Fg_Str != NULL))
- SLtt_Use_Ansi_Colors = 1;
- else
- {
-#if 0
- Color_Fg_Str = "%?%p1%{7}%>%t\033[1;3%p1%{8}%m%dm%e\033[3%p1%dm%;";
- Color_Bg_Str = "%?%p1%{7}%>%t\033[5;4%p1%{8}%m%dm%e\033[4%p1%dm%;";
- Max_Terminfo_Colors = 16;
-#else
- Color_Fg_Str = "\033[3%dm";
- Color_Bg_Str = "\033[4%dm";
- Max_Terminfo_Colors = 8;
-#endif
- }
-
-#if SLTT_HAS_NON_BCE_SUPPORT
- Can_Background_Color_Erase = TGETFLAG ("ut"); /* bce */
- /* Modern xterms have the BCE capability as well as the linux console */
- if (Can_Background_Color_Erase == 0)
- {
- Can_Background_Color_Erase = (Linux_Console
-# if SLTT_XTERM_ALWAYS_BCE
- || is_xterm
-# endif
- );
- }
-#endif
- get_color_info ();
-
-
- if ((Cls_Str == NULL)
- || (Curs_Pos_Str == NULL))
- return -2;
-
- return 0;
-}
-
-#endif
-/* Unix */
-
-/* specific to vtxxx only */
-void SLtt_enable_cursor_keys (void)
-{
-#ifdef __unix__
- if (Vt100_Like)
-#endif
- tt_write_string("\033=\033[?1l");
-}
-
-#ifdef VMS
-int SLtt_initialize (char *term)
-{
- SLtt_get_terminfo ();
- return 0;
-}
-
-void SLtt_get_terminfo ()
-{
- int zero = 0;
-
- Color_Fg_Str = "\033[3%dm";
- Color_Bg_Str = "\033[4%dm";
- Max_Terminfo_Colors = 8;
-
- get_color_info ();
-
- SLtt_set_term_vtxxx(&zero);
- Start_Alt_Chars_Str = "\016";
- End_Alt_Chars_Str = "\017";
- SLtt_Has_Alt_Charset = 1;
- SLtt_Graphics_Char_Pairs = "aaffgghhjjkkllmmnnooqqssttuuvvwwxx";
- Enable_Alt_Char_Set = "\033(B\033)0";
- SLtt_get_screen_size ();
-}
-#endif
-
-/* This sets term for vt102 terminals it parameter vt100 is 0. If vt100
- * is non-zero, set terminal appropriate for a only vt100
- * (no add line capability). */
-
-void SLtt_set_term_vtxxx(int *vt100)
-{
- Norm_Vid_Str = "\033[m";
-
- Scroll_R_Str = "\033[%i%d;%dr";
- Cls_Str = "\033[2J\033[H";
- Rev_Vid_Str = "\033[7m";
- Bold_Vid_Str = "\033[1m";
- Blink_Vid_Str = "\033[5m";
- UnderLine_Vid_Str = "\033[4m";
- Del_Eol_Str = "\033[K";
- Del_Bol_Str = "\033[1K";
- Rev_Scroll_Str = "\033M";
- Curs_F_Str = "\033[%dC";
- /* Len_Curs_F_Str = 5; */
- Curs_Pos_Str = "\033[%i%d;%dH";
- if ((vt100 == NULL) || (*vt100 == 0))
- {
- Ins_Mode_Str = "\033[4h";
- Eins_Mode_Str = "\033[4l";
- Del_Char_Str = "\033[P";
- Del_N_Lines_Str = "\033[%dM";
- Add_N_Lines_Str = "\033[%dL";
- SLtt_Term_Cannot_Insert = 0;
- }
- else
- {
- Del_N_Lines_Str = NULL;
- Add_N_Lines_Str = NULL;
- SLtt_Term_Cannot_Insert = 1;
- }
- SLtt_Term_Cannot_Scroll = 0;
- /* No_Move_In_Standout = 0; */
-}
-
-int SLtt_init_video (void)
-{
- /* send_string_to_term("\033[?6h"); */
- /* relative origin mode */
- tt_write_string (Term_Init_Str);
- tt_write_string (Keypad_Init_Str);
- SLtt_reset_scroll_region();
- SLtt_end_insert();
- tt_write_string (Enable_Alt_Char_Set);
- Video_Initialized = 1;
- return 0;
-}
-
-int SLtt_reset_video (void)
-{
- SLtt_goto_rc (SLtt_Screen_Rows - 1, 0);
- Cursor_Set = 0;
- SLtt_normal_video (); /* MSKermit requires this */
- tt_write_string(Norm_Vid_Str);
-
- Current_Fgbg = 0xFFFFFFFFU;
- SLtt_set_alt_char_set (0);
- if (SLtt_Use_Ansi_Colors)
- {
- if (Reset_Color_String == NULL)
- {
- SLtt_Char_Type attr;
- if (-1 != make_color_fgbg (NULL, NULL, &attr))
- write_attributes (attr);
- else tt_write_string ("\033[0m\033[m");
- }
- else tt_write_string (Reset_Color_String);
- Current_Fgbg = 0xFFFFFFFFU;
- }
- SLtt_erase_line ();
- tt_write_string (Keypad_Reset_Str);
- tt_write_string (Term_Reset_Str);
- SLtt_flush_output ();
- Video_Initialized = 0;
- return 0;
-}
-
-void SLtt_bold_video (void)
-{
- tt_write_string (Bold_Vid_Str);
-}
-
-int SLtt_set_mouse_mode (int mode, int force)
-{
- char *term;
-
- if (force == 0)
- {
- if (NULL == (term = (char *) getenv("TERM"))) return -1;
- if (strncmp ("xterm", term, 5))
- return -1;
- }
-
- if (mode)
- tt_write_string ("\033[?9h");
- else
- tt_write_string ("\033[?9l");
-
- return 0;
-}
-
-void SLtt_disable_status_line (void)
-{
- if (SLtt_Has_Status_Line > 0)
- {
- tt_write_string (Disable_Status_line_Str);
- SLtt_flush_output ();
- }
-}
-
-int SLtt_write_to_status_line (char *s, int col)
-{
- if ((SLtt_Has_Status_Line <= 0)
- || (Goto_Status_Line_Str == NULL)
- || (Return_From_Status_Line_Str == NULL))
- return -1;
-
- tt_printf (Goto_Status_Line_Str, col, 0);
- tt_write_string (s);
- tt_write_string (Return_From_Status_Line_Str);
- return 0;
-}
-
-void SLtt_get_screen_size (void)
-{
-#ifdef VMS
- int status, code;
- unsigned short chan;
- $DESCRIPTOR(dev_dsc, "SYS$INPUT:");
-#endif
- int r = 0, c = 0;
-
-#ifdef TIOCGWINSZ
- struct winsize wind_struct;
-
- do
- {
- if ((ioctl(1,TIOCGWINSZ,&wind_struct) == 0)
- || (ioctl(0, TIOCGWINSZ, &wind_struct) == 0)
- || (ioctl(2, TIOCGWINSZ, &wind_struct) == 0))
- {
- c = (int) wind_struct.ws_col;
- r = (int) wind_struct.ws_row;
- break;
- }
- }
- while (errno == EINTR);
-
-#endif
-
-#ifdef VMS
- status = sys$assign(&dev_dsc,&chan,0,0,0);
- if (status & 1)
- {
- code = DVI$_DEVBUFSIZ;
- status = lib$getdvi(&code, &chan,0, &c, 0,0);
- if (!(status & 1))
- c = 80;
- code = DVI$_TT_PAGE;
- status = lib$getdvi(&code, &chan,0, &r, 0,0);
- if (!(status & 1))
- r = 24;
- sys$dassgn(chan);
- }
-#endif
-
- if (r <= 0)
- {
- char *s = getenv ("LINES");
- if (s != NULL) r = atoi (s);
- }
-
- if (c <= 0)
- {
- char *s = getenv ("COLUMNS");
- if (s != NULL) c = atoi (s);
- }
-
- if (r <= 0) r = 24;
- if (c <= 0) c = 80;
-#if 0
- if ((r <= 0) || (r > 200)) r = 24;
- if ((c <= 0) || (c > 250)) c = 80;
-#endif
- SLtt_Screen_Rows = r;
- SLtt_Screen_Cols = c;
-}
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-int _SLtt_get_bce_color_offset (void)
-{
- if ((SLtt_Use_Ansi_Colors == 0)
- || Can_Background_Color_Erase
- || SLtt_Use_Blink_For_ACS) /* in this case, we cannot lose a color */
- Bce_Color_Offset = 0;
- else
- {
- if (GET_BG(Ansi_Color_Map[0].fgbg) == SLSMG_COLOR_DEFAULT)
- Bce_Color_Offset = 0;
- else
- Bce_Color_Offset = 1;
- }
-
- return Bce_Color_Offset;
-}
-#endif
diff --git a/mdk-stage1/slang/slerr.c b/mdk-stage1/slang/slerr.c
deleted file mode 100644
index 139b3859b..000000000
--- a/mdk-stage1/slang/slerr.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/* error handling common to all routines. */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-void (*SLang_VMessage_Hook) (char *, va_list);
-void (*SLang_Error_Hook)(char *);
-void (*SLang_Exit_Error_Hook)(char *, va_list);
-volatile int SLang_Error = 0;
-char *SLang_Error_Message;
-volatile int SLKeyBoard_Quit = 0;
-
-static char *get_error_string (void)
-{
- char *str;
-
- if (!SLang_Error) SLang_Error = SL_UNKNOWN_ERROR;
- if (SLang_Error_Message != NULL) str = SLang_Error_Message;
- else switch(SLang_Error)
- {
- case SL_NOT_IMPLEMENTED: str = "Not Implemented"; break;
- case SL_APPLICATION_ERROR: str = "Application Error"; break;
- case SL_VARIABLE_UNINITIALIZED: str = "Variable Uninitialized"; break;
- case SL_MALLOC_ERROR : str = "Malloc Error"; break;
- case SL_INTERNAL_ERROR: str = "Internal Error"; break;
- case SL_STACK_OVERFLOW: str = "Stack Overflow"; break;
- case SL_STACK_UNDERFLOW: str = "Stack Underflow"; break;
- case SL_INTRINSIC_ERROR: str = "Intrinsic Error"; break;
- case SL_USER_BREAK: str = "User Break"; break;
- case SL_UNDEFINED_NAME: str = "Undefined Name"; break;
- case SL_SYNTAX_ERROR: str = "Syntax Error"; break;
- case SL_DUPLICATE_DEFINITION: str = "Duplicate Definition"; break;
- case SL_TYPE_MISMATCH: str = "Type Mismatch"; break;
- case SL_READONLY_ERROR: str = "Variable is read-only"; break;
- case SL_DIVIDE_ERROR: str = "Divide by zero"; break;
- case SL_OBJ_NOPEN: str = "Object not opened"; break;
- case SL_OBJ_UNKNOWN: str = "Object unknown"; break;
- case SL_INVALID_PARM: str = "Invalid Parameter"; break;
- case SL_TYPE_UNDEFINED_OP_ERROR:
- str = "Operation not defined for datatype"; break;
- case SL_USER_ERROR:
- str = "User Error"; break;
- case SL_USAGE_ERROR:
- str = "Illegal usage of function";
- break;
- case SL_FLOATING_EXCEPTION:
- str = "Floating Point Exception";
- break;
- case SL_UNKNOWN_ERROR:
- default: str = "Unknown Error Code";
- }
-
- SLang_Error_Message = NULL;
- return str;
-}
-
-void SLang_doerror (char *error)
-{
- char *str = NULL;
- char *err;
- char *malloced_err_buf;
- char err_buf [1024];
-
- malloced_err_buf = NULL;
-
- if (((SLang_Error == SL_USER_ERROR)
- || (SLang_Error == SL_USAGE_ERROR))
- && (error != NULL) && (*error != 0))
- err = error;
- else
- {
- char *sle = "S-Lang Error: ";
- unsigned int len;
- char *fmt;
-
- str = get_error_string ();
-
- fmt = "%s%s%s";
- if ((error == NULL) || (*error == 0))
- error = "";
- else if (SLang_Error == SL_UNKNOWN_ERROR)
- /* Do not display an unknown error message if error is non-NULL */
- str = "";
- else
- fmt = "%s%s: %s";
-
- len = strlen (sle) + strlen (str) + strlen(error) + 1;
-
- err = err_buf;
- if (len >= sizeof (err_buf))
- {
- if (NULL == (malloced_err_buf = SLmalloc (len)))
- err = NULL;
- else
- err = malloced_err_buf;
- }
-
- if (err != NULL) sprintf (err, fmt, sle, str, error);
- else err = "Out of memory";
- }
-
- if (SLang_Error_Hook == NULL)
- {
- fputs (err, stderr);
- fputs("\r\n", stderr);
- fflush (stderr);
- }
- else
- (*SLang_Error_Hook)(err);
-
- SLfree (malloced_err_buf);
-}
-
-void SLang_verror (int err_code, char *fmt, ...)
-{
- va_list ap;
- char err [1024];
-
- if (err_code == 0) err_code = SL_INTRINSIC_ERROR;
- if (SLang_Error == 0) SLang_Error = err_code;
-
- if (fmt != NULL)
- {
- va_start(ap, fmt);
- (void) _SLvsnprintf (err, sizeof (err), fmt, ap);
- fmt = err;
- va_end(ap);
- }
-
- SLang_doerror (fmt);
-}
-
-void SLang_exit_error (char *fmt, ...)
-{
- va_list ap;
-
- va_start (ap, fmt);
- if (SLang_Exit_Error_Hook != NULL)
- {
- (*SLang_Exit_Error_Hook) (fmt, ap);
- exit (1);
- }
-
- if (fmt != NULL)
- {
- vfprintf (stderr, fmt, ap);
- fputs ("\r\n", stderr);
- fflush (stderr);
- }
- va_end (ap);
-
- exit (1);
-}
-
-void SLang_vmessage (char *fmt, ...)
-{
- va_list ap;
-
- if (fmt == NULL)
- return;
-
- va_start (ap, fmt);
-
- if (SLang_VMessage_Hook != NULL)
- (*SLang_VMessage_Hook) (fmt, ap);
- else
- {
- vfprintf (stdout, fmt, ap);
- fputs ("\r\n", stdout);
- }
-
- va_end (ap);
-}
diff --git a/mdk-stage1/slang/slerrno.c b/mdk-stage1/slang/slerrno.c
deleted file mode 100644
index 662fadde1..000000000
--- a/mdk-stage1/slang/slerrno.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/* The point of this file is to handle errno values in a system independent
- * way so that they may be used in slang scripts.
- */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <errno.h>
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct
-{
- char *msg;
- int sys_errno;
- char *symbolic_name;
-}
-Errno_Map_Type;
-
-static Errno_Map_Type Errno_Map [] =
-{
-#ifndef EPERM
-# define EPERM -1
-#endif
- {"Not owner", EPERM, "EPERM"},
-#ifndef ENOENT
-# define ENOENT -1
-#endif
- {"No such file or directory", ENOENT, "ENOENT"},
-#ifndef ESRCH
-# define ESRCH -1
-#endif
- {"No such process", ESRCH, "ESRCH"},
-#ifndef EINTR
-# define EINTR -1
-#endif
- {"Interrupted system call", EINTR, "EINTR"},
-#ifndef EIO
-# define EIO -1
-#endif
- {"I/O error", EIO, "EIO"},
-#ifndef ENXIO
-# define ENXIO -1
-#endif
- {"No such device or address", ENXIO, "ENXIO"},
-#ifndef E2BIG
-# define E2BIG -1
-#endif
- {"Arg list too long", E2BIG, "E2BIG"},
-#ifndef ENOEXEC
-# define ENOEXEC -1
-#endif
- {"Exec format error", ENOEXEC,"ENOEXEC"},
-#ifndef EBADF
-# define EBADF -1
-#endif
- {"Bad file number", EBADF, "EBADF"},
-#ifndef ECHILD
-# define ECHILD -1
-#endif
- {"No children", ECHILD, "ECHILD"},
-#ifndef EAGAIN
-# define EAGAIN -1
-#endif
- {"Try again", EAGAIN, "EAGAIN"},
-#ifndef ENOMEM
-# define ENOMEM -1
-#endif
- {"Not enough core", ENOMEM, "ENOMEM"},
-#ifndef EACCES
-# define EACCES -1
-#endif
- {"Permission denied", EACCES, "EACCES"},
-#ifndef EFAULT
-# define EFAULT -1
-#endif
- {"Bad address", EFAULT, "EFAULT"},
-#ifndef ENOTBLK
-# define ENOTBLK -1
-#endif
- {"Block device required", ENOTBLK, "ENOTBLK"},
-#ifndef EBUSY
-# define EBUSY -1
-#endif
- {"Mount device busy", EBUSY, "EBUSY"},
-#ifndef EEXIST
-# define EEXIST -1
-#endif
- {"File exists", EEXIST, "EEXIST"},
-#ifndef EXDEV
-# define EXDEV -1
-#endif
- {"Cross-device link", EXDEV, "EXDEV"},
-#ifndef ENODEV
-# define ENODEV -1
-#endif
- {"No such device", ENODEV, "ENODEV"},
-#ifndef ENOTDIR
-# define ENOTDIR -1
-#endif
- {"Not a directory", ENOTDIR, "ENOTDIR"},
-#ifndef EISDIR
-# define EISDIR -1
-#endif
- {"Is a directory", EISDIR, "EISDIR"},
-#ifndef EINVAL
-# define EINVAL -1
-#endif
- {"Invalid argument", EINVAL, "EINVAL"},
-#ifndef ENFILE
-# define ENFILE -1
-#endif
- {"File table overflow", ENFILE, "ENFILE"},
-#ifndef EMFILE
-# define EMFILE -1
-#endif
- {"Too many open files", EMFILE, "EMFILE"},
-#ifndef ENOTTY
-# define ENOTTY -1
-#endif
- {"Not a typewriter", ENOTTY, "ENOTTY"},
-#ifndef ETXTBSY
-# define ETXTBSY -1
-#endif
- {"Text file busy", ETXTBSY, "ETXTBSY"},
-#ifndef EFBIG
-# define EFBIG -1
-#endif
- {"File too large", EFBIG, "EFBIG"},
-#ifndef ENOSPC
-# define ENOSPC -1
-#endif
- {"No space left on device", ENOSPC, "ENOSPC"},
-#ifndef ESPIPE
-# define ESPIPE -1
-#endif
- {"Illegal seek", ESPIPE, "ESPIPE"},
-#ifndef EROFS
-# define EROFS -1
-#endif
- {"Read-only file system", EROFS, "EROFS"},
-#ifndef EMLINK
-# define EMLINK -1
-#endif
- {"Too many links", EMLINK, "EMLINK"},
-#ifndef EPIPE
-# define EPIPE -1
-#endif
- {"Broken pipe", EPIPE, "EPIPE"},
-#ifndef ELOOP
-# define ELOOP -1
-#endif
- {"Too many levels of symbolic links",ELOOP, "ELOOP"},
-#ifndef ENAMETOOLONG
-# define ENAMETOOLONG -1
-#endif
- {"File name too long", ENAMETOOLONG, "ENAMETOOLONG"},
-
- {NULL, 0, NULL}
-};
-
-int _SLerrno_errno;
-
-int SLerrno_set_errno (int sys_errno)
-{
- _SLerrno_errno = sys_errno;
- return 0;
-}
-
-char *SLerrno_strerror (int sys_errno)
-{
- Errno_Map_Type *e;
-
- e = Errno_Map;
- while (e->msg != NULL)
- {
- if (e->sys_errno == sys_errno)
- return e->msg;
-
- e++;
- }
-
- if (sys_errno == SL_ERRNO_NOT_IMPLEMENTED)
- return "System call not available for this platform";
-
- return "Unknown error";
-}
-
-static char *intrin_errno_string (int *sys_errno)
-{
- return SLerrno_strerror (*sys_errno);
-}
-
-int _SLerrno_init (void)
-{
- static Errno_Map_Type *e;
-
- if (e != NULL) /* already initialized */
- return 0;
-
- if ((-1 == SLadd_intrinsic_function ("errno_string", (FVOID_STAR) intrin_errno_string,
- SLANG_STRING_TYPE, 1, SLANG_INT_TYPE))
- || (-1 == SLadd_intrinsic_variable ("errno", (VOID_STAR)&_SLerrno_errno, SLANG_INT_TYPE, 1)))
- return -1;
-
- e = Errno_Map;
- while (e->msg != NULL)
- {
- if (-1 == SLadd_intrinsic_variable (e->symbolic_name, (VOID_STAR) &e->sys_errno, SLANG_INT_TYPE, 1))
- return -1;
- e++;
- }
-
- return 0;
-}
diff --git a/mdk-stage1/slang/slgetkey.c b/mdk-stage1/slang/slgetkey.c
deleted file mode 100644
index 2f2914f07..000000000
--- a/mdk-stage1/slang/slgetkey.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-unsigned int SLang_Input_Buffer_Len = 0;
-unsigned char SLang_Input_Buffer [SL_MAX_INPUT_BUFFER_LEN];
-
-int SLang_Abort_Char = 7;
-int SLang_Ignore_User_Abort = 0;
-
-/* This has the effect of mapping all characters in the range 128-169 to
- * ESC [ something
- */
-
-unsigned int SLang_getkey (void)
-{
- unsigned int imax;
- unsigned int ch;
-
- if (SLang_Input_Buffer_Len)
- {
- ch = (unsigned int) *SLang_Input_Buffer;
- SLang_Input_Buffer_Len--;
- imax = SLang_Input_Buffer_Len;
-
- SLMEMCPY ((char *) SLang_Input_Buffer,
- (char *) (SLang_Input_Buffer + 1), imax);
- }
- else if (SLANG_GETKEY_ERROR == (ch = _SLsys_getkey ())) return ch;
-
-#if _SLANG_MAP_VTXXX_8BIT
-# if !defined(IBMPC_SYSTEM)
- if (ch & 0x80)
- {
- unsigned char i;
- i = (unsigned char) (ch & 0x7F);
- if (i < ' ')
- {
- i += 64;
- SLang_ungetkey (i);
- ch = 27;
- }
- }
-# endif
-#endif
- return(ch);
-}
-
-int SLang_ungetkey_string (unsigned char *s, unsigned int n)
-{
- register unsigned char *bmax, *b, *b1;
- if (SLang_Input_Buffer_Len + n + 3 > SL_MAX_INPUT_BUFFER_LEN)
- return -1;
-
- b = SLang_Input_Buffer;
- bmax = (b - 1) + SLang_Input_Buffer_Len;
- b1 = bmax + n;
- while (bmax >= b) *b1-- = *bmax--;
- bmax = b + n;
- while (b < bmax) *b++ = *s++;
- SLang_Input_Buffer_Len += n;
- return 0;
-}
-
-int SLang_buffer_keystring (unsigned char *s, unsigned int n)
-{
-
- if (n + SLang_Input_Buffer_Len + 3 > SL_MAX_INPUT_BUFFER_LEN) return -1;
-
- SLMEMCPY ((char *) SLang_Input_Buffer + SLang_Input_Buffer_Len,
- (char *) s, n);
- SLang_Input_Buffer_Len += n;
- return 0;
-}
-
-int SLang_ungetkey (unsigned char ch)
-{
- return SLang_ungetkey_string(&ch, 1);
-}
-
-int SLang_input_pending (int tsecs)
-{
- int n;
- unsigned char c;
- if (SLang_Input_Buffer_Len) return (int) SLang_Input_Buffer_Len;
-
- n = _SLsys_input_pending (tsecs);
-
- if (n <= 0) return 0;
-
- c = (unsigned char) SLang_getkey ();
- SLang_ungetkey_string (&c, 1);
-
- return n;
-}
-
-void SLang_flush_input (void)
-{
- int quit = SLKeyBoard_Quit;
-
- SLang_Input_Buffer_Len = 0;
- SLKeyBoard_Quit = 0;
- while (_SLsys_input_pending (0) > 0)
- {
- (void) _SLsys_getkey ();
- /* Set this to 0 because _SLsys_getkey may stuff keyboard buffer if
- * key sends key sequence (OS/2, DOS, maybe VMS).
- */
- SLang_Input_Buffer_Len = 0;
- }
- SLKeyBoard_Quit = quit;
-}
-
-#ifdef IBMPC_SYSTEM
-static int Map_To_ANSI;
-int SLgetkey_map_to_ansi (int enable)
-{
- Map_To_ANSI = enable;
- return 0;
-}
-
-static int convert_scancode (unsigned int scan,
- unsigned int shift,
- int getkey,
- unsigned int *ret_key)
-{
- unsigned char buf[16];
- unsigned char *b;
- unsigned char end;
- int is_arrow;
-
- shift &= (_SLTT_KEY_ALT|_SLTT_KEY_SHIFT|_SLTT_KEY_CTRL);
-
- b = buf;
- if (_SLTT_KEY_ALT == shift)
- {
- shift = 0;
- *b++ = 27;
- }
- *b++ = 27;
- *b++ = '[';
-
- is_arrow = 0;
- end = '~';
- if (shift)
- {
- if (shift == _SLTT_KEY_CTRL)
- end = '^';
- else if (shift == _SLTT_KEY_SHIFT)
- end = '$';
- else shift = 0;
- }
-
- /* These mappings correspond to what rxvt produces under Linux */
- switch (scan & 0xFF)
- {
- default:
- return -1;
-
- case 0x47: /* home */
- *b++ = '1';
- break;
- case 0x48: /* up */
- end = 'A';
- is_arrow = 1;
- break;
- case 0x49: /* PgUp */
- *b++ = '5';
- break;
- case 0x4B: /* Left */
- end = 'D';
- is_arrow = 1;
- break;
- case 0x4D: /* Right */
- end = 'C';
- is_arrow = 1;
- break;
- case 0x4F: /* End */
- *b++ = '4';
- break;
- case 0x50: /* Down */
- end = 'B';
- is_arrow = 1;
- break;
- case 0x51: /* PgDn */
- *b++ = '6';
- break;
- case 0x52: /* Insert */
- *b++ = '2';
- break;
- case 0x53: /* Delete */
- *b++ = '3';
- break;
- case ';': /* F1 */
- *b++ = '1';
- *b++ = '1';
- break;
- case '<': /* F2 */
- *b++ = '1';
- *b++ = '2';
- break;
- case '=': /* F3 */
- *b++ = '1';
- *b++ = '3';
- break;
-
- case '>': /* F4 */
- *b++ = '1';
- *b++ = '4';
- break;
-
- case '?': /* F5 */
- *b++ = '1';
- *b++ = '5';
- break;
-
- case '@': /* F6 */
- *b++ = '1';
- *b++ = '7';
- break;
-
- case 'A': /* F7 */
- *b++ = '1';
- *b++ = '8';
- break;
-
- case 'B': /* F8 */
- *b++ = '1';
- *b++ = '9';
- break;
-
- case 'C': /* F9 */
- *b++ = '2';
- *b++ = '0';
- break;
-
- case 'D': /* F10 */
- *b++ = '2';
- *b++ = '1';
- break;
-
- case 0x57: /* F11 */
- *b++ = '2';
- *b++ = '3';
- break;
-
- case 0x58: /* F12 */
- *b++ = '2';
- *b++ = '4';
- break;
- }
-
- if (is_arrow && shift)
- {
- if (shift == _SLTT_KEY_CTRL)
- end &= 0x1F;
- else
- end |= 0x20;
- }
- *b++ = end;
-
- if (getkey)
- {
- (void) SLang_buffer_keystring (buf + 1, (unsigned int) (b - (buf + 1)));
- *ret_key = buf[0];
- return 0;
- }
-
- (void) SLang_buffer_keystring (buf, (unsigned int) (b - buf));
- return 0;
-}
-
-
-unsigned int _SLpc_convert_scancode (unsigned int scan,
- unsigned int shift,
- int getkey)
-{
- unsigned char buf[16];
-
- if (Map_To_ANSI)
- {
- if (0 == convert_scancode (scan, shift, getkey, &scan))
- return scan;
- }
-
- if (getkey)
- {
- buf[0] = scan & 0xFF;
- SLang_buffer_keystring (buf, 1);
- return (scan >> 8) & 0xFF;
- }
- buf[0] = (scan >> 8) & 0xFF;
- buf[1] = scan & 0xFF;
- (void) SLang_buffer_keystring (buf, 2);
- return 0;
-}
-
-#endif
diff --git a/mdk-stage1/slang/slimport.c b/mdk-stage1/slang/slimport.c
deleted file mode 100644
index 44b4b25e1..000000000
--- a/mdk-stage1/slang/slimport.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define SLANG_HAS_DYNAMIC_LINKING 1
-
-#ifndef HAVE_DLFCN_H
-# undef SLANG_HAS_DYNAMIC_LINKING
-# define SLANG_HAS_DYNAMIC_LINKING 0
-#endif
-
-/* The rest of this file is in the if block */
-#if SLANG_HAS_DYNAMIC_LINKING
-
-#ifdef HAVE_DLFCN_H
-# include <dlfcn.h>
-#endif
-
-static char *Module_Path;
-#define MODULE_PATH_ENV_NAME "SLANG_MODULE_PATH"
-#ifndef MODULE_INSTALL_DIR
-# define MODULE_INSTALL_DIR "/usr/local/lib/slang/modules"
-#endif
-
-typedef struct _Handle_Type
-{
- struct _Handle_Type *next;
- char *name;
- VOID_STAR handle;
- void (*deinit_fun) (void);
-}
-Handle_Type;
-
-static Handle_Type *Handle_List;
-
-static void delete_handles (void)
-{
- while (Handle_List != NULL)
- {
- Handle_Type *next = Handle_List->next;
-
- if (Handle_List->deinit_fun != NULL)
- Handle_List->deinit_fun ();
- (void) dlclose (Handle_List->handle);
- SLang_free_slstring (Handle_List->name);
- SLfree ((char *)Handle_List);
- Handle_List = next;
- }
-}
-
-static Handle_Type *save_handle (char *name, VOID_STAR h, void (*df)(void))
-{
- Handle_Type *l;
-
- l = (Handle_Type *) SLmalloc (sizeof (Handle_Type));
- if (l == NULL)
- return NULL;
- memset ((char *) l, 0, sizeof(Handle_Type));
- if (NULL == (l->name = SLang_create_slstring (name)))
- {
- SLfree ((char *) l);
- return NULL;
- }
- l->handle = h;
- l->next = Handle_List;
- l->deinit_fun = df;
- Handle_List = l;
-
- return l;
-}
-
-static Handle_Type *find_handle (char *name)
-{
- Handle_Type *l;
-
- l = Handle_List;
- while (l != NULL)
- {
- if (0 == strcmp (l->name, name))
- break;
- l = l->next;
- }
- return l;
-}
-
-static int import_from_library (char *name,
- char *init_fun_name, char *deinit_fun_name,
- char *file,
- char *ns,
- char *ns_init_fun_name)
-{
- VOID_STAR handle;
- int (*init_fun) (void);
- int (*ns_init_fun) (char *);
- void (*deinit_fun) (void);
- char *err;
- char filebuf[1024];
- char *fun_name;
-
- if (NULL != find_handle (name))
- return 0; /* already loaded */
-
- while (1)
- {
-#ifndef RTLD_GLOBAL
-# define RTLD_GLOBAL 0
-#endif
-#ifdef RTLD_NOW
- handle = (VOID_STAR) dlopen (file, RTLD_NOW | RTLD_GLOBAL);
-#else
- handle = (VOID_STAR) dlopen (file, RTLD_LAZY | RTLD_GLOBAL);
-#endif
-
- if (handle != NULL)
- break;
-
- if (NULL == strchr (file, '/'))
- {
- _SLsnprintf (filebuf, sizeof (filebuf), "./%s", file);
- file = filebuf;
- continue;
- }
-
- if (NULL == (err = (char *) dlerror ()))
- err = "UNKNOWN";
-
- SLang_verror (SL_INTRINSIC_ERROR,
- "Error linking to %s: %s", file, err);
- return -1;
- }
-
- fun_name = ns_init_fun_name;
- ns_init_fun = (int (*)(char *)) dlsym (handle, fun_name);
- if (ns_init_fun == NULL)
- {
- if ((ns != NULL)
- && (0 != strcmp (ns, "Global")))
- goto return_error;
-
- fun_name = init_fun_name;
- init_fun = (int (*)(void)) dlsym (handle, fun_name);
- if (init_fun == NULL)
- goto return_error;
-
- if (-1 == (*init_fun) ())
- {
- dlclose (handle);
- return -1;
- }
- }
- else if (-1 == (*ns_init_fun) (ns))
- {
- dlclose (handle);
- return -1;
- }
-
-
- deinit_fun = (void (*)(void)) dlsym (handle, deinit_fun_name);
-
- (void) save_handle (name, handle, deinit_fun);
- return 0;
-
- return_error:
-
- if (NULL == (err = (char *) dlerror ()))
- err = "UNKNOWN";
-
- dlclose (handle);
- SLang_verror (SL_INTRINSIC_ERROR,
- "Unable to get symbol %s from %s: %s",
- name, file, err);
- return -1;
-}
-
-static void import_module (void)
-{
- char module_name[256];
- char symbol_name[256];
- char deinit_name[256];
- char ns_init_name[256];
- char *path;
- char *file;
- char *module;
- char *ns = NULL;
-
- if (SLang_Num_Function_Args == 2)
- {
- if (-1 == SLang_pop_slstring (&ns))
- return;
- }
-
- if (-1 == SLang_pop_slstring (&module))
- {
- SLang_free_slstring (ns); /* NULL ok */
- return;
- }
-
- _SLsnprintf (symbol_name, sizeof(symbol_name), "init_%s_module", module);
- _SLsnprintf (module_name, sizeof(module_name), "%s-module.so", module);
- _SLsnprintf (deinit_name, sizeof(deinit_name), "deinit_%s_module", module);
- _SLsnprintf (ns_init_name, sizeof (ns_init_name), "init_%s_module_ns", module);
-
- if (Module_Path != NULL)
- file = SLpath_find_file_in_path (Module_Path, module_name);
- else file = NULL;
-
- if ((file == NULL)
- && (NULL != (path = getenv (MODULE_PATH_ENV_NAME))))
- file = SLpath_find_file_in_path (path, module_name);
-
- if (file == NULL)
- file = SLpath_find_file_in_path (MODULE_INSTALL_DIR, module_name);
-
- if (file != NULL)
- {
- (void) import_from_library (symbol_name, symbol_name, deinit_name, file, ns, ns_init_name);
- SLfree (file);
- }
- else
- {
- /* Maybe the system loader can find it in LD_LIBRARY_PATH */
- (void) import_from_library (symbol_name, symbol_name, deinit_name, module_name, ns, ns_init_name);
- }
-}
-
-static void set_import_module_path (char *path)
-{
- (void) SLang_set_module_load_path (path);
-}
-
-static char *get_import_module_path (void)
-{
- char *path;
- if (Module_Path != NULL)
- return Module_Path;
- if (NULL != (path = getenv (MODULE_PATH_ENV_NAME)))
- return path;
- return MODULE_INSTALL_DIR;
-}
-
-static SLang_Intrin_Fun_Type Module_Intrins [] =
-{
- MAKE_INTRINSIC_0("import", import_module, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("set_import_module_path", set_import_module_path, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("get_import_module_path", get_import_module_path, SLANG_STRING_TYPE),
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-#endif /* SLANG_HAS_DYNAMIC_LINKING */
-
-int SLang_set_module_load_path (char *path)
-{
-#if SLANG_HAS_DYNAMIC_LINKING
- if (NULL == (path = SLang_create_slstring (path)))
- return -1;
- SLang_free_slstring (Module_Path);
- Module_Path = path;
- return 0;
-#else
- (void) path;
- return -1;
-#endif
-}
-
-int SLang_init_import (void)
-{
-#if SLANG_HAS_DYNAMIC_LINKING
- (void) SLang_add_cleanup_function (delete_handles);
- return SLadd_intrin_fun_table (Module_Intrins, "__IMPORT__");
-#else
- return 0;
-#endif
-}
diff --git a/mdk-stage1/slang/slinclud.h b/mdk-stage1/slang/slinclud.h
deleted file mode 100644
index d60a4423e..000000000
--- a/mdk-stage1/slang/slinclud.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _SLANG_INCLUDE_H_
-#define _SLANG_INCLUDE_H_
-
-#include "config.h"
-#include "sl-feat.h"
-
-#include <stdio.h>
-#include <string.h>
-
-#ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-
-#ifdef HAVE_MALLOC_H
-# include <malloc.h>
-#endif
-
-#ifdef HAVE_MEMORY_H
-# include <memory.h>
-#endif
-
-#endif /* _SLANG_INCLUDE_H_ */
diff --git a/mdk-stage1/slang/slintall.c b/mdk-stage1/slang/slintall.c
deleted file mode 100644
index a66b9d6d2..000000000
--- a/mdk-stage1/slang/slintall.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-int SLang_init_all (void)
-{
- if ((-1 == SLang_init_slang ())
- || (-1 == SLang_init_slmath ())
- || (-1 == SLang_init_posix_dir ())
- || (-1 == SLang_init_posix_process ())
- || (-1 == SLang_init_stdio ())
- || (-1 == SLang_init_array ())
- || (-1 == SLang_init_posix_io ())
- || (-1 == SLang_init_ospath ())
- )
- return -1;
-
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slistruc.c b/mdk-stage1/slang/slistruc.c
deleted file mode 100644
index 06b8fd6ff..000000000
--- a/mdk-stage1/slang/slistruc.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/* Intrinsic Structure type implementation */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Intrinsic structures */
-
-typedef struct
-{
- char *name;
- VOID_STAR addr;
- SLang_IStruct_Field_Type *fields;
-}
-_SLang_IStruct_Type;
-
-static SLang_IStruct_Field_Type *istruct_pop_field (char *name, int no_readonly, VOID_STAR *addr)
-{
- _SLang_IStruct_Type *s;
- SLang_IStruct_Field_Type *f;
- char *struct_addr;
-
- /* Note: There is no need to free this object */
- if (-1 == SLclass_pop_ptr_obj (SLANG_ISTRUCT_TYPE, (VOID_STAR *) &s))
- return NULL;
-
- if (NULL == (struct_addr = *(char **)s->addr))
- {
- SLang_verror (SL_INTRINSIC_ERROR,
- "%s is NULL. Unable to access field", s->name);
- return NULL;
- }
-
- f = s->fields;
- while (f->field_name != NULL)
- {
- /* Since both these are slstrings, just test pointers */
- if (f->field_name != name)
- {
- f++;
- continue;
- }
-
- if (no_readonly && f->read_only)
- {
- SLang_verror (SL_READONLY_ERROR,
- "%s.%s is read-only", s->name, name);
- return NULL;
- }
-
- *addr = (VOID_STAR) (struct_addr + f->offset);
- return f;
- }
-
- SLang_verror (SL_TYPE_MISMATCH,
- "%s has no field called %s", s->name, name);
- return NULL;
-}
-
-static int istruct_sget (unsigned char type, char *name)
-{
- SLang_IStruct_Field_Type *f;
- VOID_STAR addr;
- SLang_Class_Type *cl;
-
- if (NULL == (f = istruct_pop_field (name, 0, &addr)))
- return -1;
-
- type = f->type;
- cl = _SLclass_get_class (type);
-
- return (cl->cl_push_intrinsic)(f->type, addr);
-}
-
-static int istruct_sput (unsigned char type, char *name)
-{
- SLang_IStruct_Field_Type *f;
- VOID_STAR addr;
- SLang_Class_Type *cl;
-
- if (NULL == (f = istruct_pop_field (name, 1, &addr)))
- return -1;
-
- type = f->type;
- cl = _SLclass_get_class (type);
-
- return (*cl->cl_pop) (type, addr);
-}
-
-static int istruct_push (unsigned char type, VOID_STAR ptr)
-{
- _SLang_IStruct_Type *s;
-
- s = *(_SLang_IStruct_Type **) ptr;
- if ((s == NULL)
- || (s->addr == NULL)
- || (*(char **) s->addr == NULL))
- return SLang_push_null ();
-
- return SLclass_push_ptr_obj (type, (VOID_STAR) s);
-}
-
-static int istruct_pop (unsigned char type, VOID_STAR ptr)
-{
- return SLclass_pop_ptr_obj (type, (VOID_STAR *)ptr);
-}
-
-static void istruct_destroy (unsigned char type, VOID_STAR ptr)
-{
- (void) type;
- (void) ptr;
-}
-
-/* Intrinsic struct objects are not stored in a variable. So, the address that
- * is passed here is actually a pointer to the struct. So, pass its address
- * to istruct_push since v is a variable. Confusing, n'est pas?
- */
-static int istruct_push_intrinsic (unsigned char type, VOID_STAR v)
-{
- return istruct_push (type, (VOID_STAR) &v);
-}
-
-static int init_intrin_struct (void)
-{
- SLang_Class_Type *cl;
- static int initialized;
-
- if (initialized)
- return 0;
-
- if (NULL == (cl = SLclass_allocate_class ("IStruct_Type")))
- return -1;
-
- cl->cl_pop = istruct_pop;
- cl->cl_push = istruct_push;
- cl->cl_sget = istruct_sget;
- cl->cl_sput = istruct_sput;
- cl->cl_destroy = istruct_destroy;
- cl->cl_push_intrinsic = istruct_push_intrinsic;
-
- if (-1 == SLclass_register_class (cl, SLANG_ISTRUCT_TYPE, sizeof (_SLang_IStruct_Type *),
- SLANG_CLASS_TYPE_PTR))
- return -1;
-
- initialized = 1;
- return 0;
-}
-
-int SLadd_istruct_table (SLang_IStruct_Field_Type *fields, VOID_STAR addr, char *name)
-{
- _SLang_IStruct_Type *s;
- SLang_IStruct_Field_Type *f;
-
- if (-1 == init_intrin_struct ())
- return -1;
-
- if (addr == NULL)
- {
- SLang_verror (SL_INVALID_PARM,
- "SLadd_istruct_table: address must be non-NULL");
- return -1;
- }
-
- if (fields == NULL)
- return -1;
-
- /* Make the field names slstrings so that only the pointers need to be
- * compared. However, this table may have been already been added for
- * another instance of the intrinsic object. So, check for the presence
- * of an slstring.
- */
- f = fields;
- while (f->field_name != NULL)
- {
- char *fname;
-
- fname = SLang_create_slstring (f->field_name);
- if (fname == NULL)
- return -1;
-
- /* Here is the check for the slstring */
- if (f->field_name == fname)
- SLang_free_slstring (fname);
- else /* replace string literal with slstring */
- f->field_name = fname;
-
- f++;
- }
-
- s = (_SLang_IStruct_Type *)SLmalloc (sizeof (_SLang_IStruct_Type));
- if (s == NULL)
- return -1;
-
- memset ((char *)s, 0, sizeof (_SLang_IStruct_Type));
- if (NULL == (s->name = SLang_create_slstring (name)))
- {
- SLfree ((char *) s);
- return -1;
- }
-
- s->addr = addr;
- s->fields = fields;
-
- if (-1 == SLadd_intrinsic_variable (name, (VOID_STAR) s, SLANG_ISTRUCT_TYPE, 1))
- {
- SLang_free_slstring (s->name);
- SLfree ((char *) s);
- return -1;
- }
-
- return 0;
-}
diff --git a/mdk-stage1/slang/slkeymap.c b/mdk-stage1/slang/slkeymap.c
deleted file mode 100644
index dff65433e..000000000
--- a/mdk-stage1/slang/slkeymap.c
+++ /dev/null
@@ -1,596 +0,0 @@
-/* Keymap routines for SLang. The role of these keymap routines is simple:
- * Just read keys from the tty and return a pointer to a keymap structure.
- * That is, a keymap is simple a mapping of strings (keys from tty) to
- * structures. Also included are routines for managing the keymaps.
- */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* We need a define a rule for upperand lower case chars that user cannot
- change! This could be a problem for international chars! */
-
-#define UPPER_CASE_KEY(x) (((x) >= 'a') && ((x) <= 'z') ? (x) - 32 : (x))
-#define LOWER_CASE_KEY(x) (((x) >= 'A') && ((x) <= 'Z') ? (x) + 32 : (x))
-
-int SLang_Key_TimeOut_Flag = 0; /* true if more than 1 sec has elapsed
- without key in multikey sequence */
-
-int SLang_Last_Key_Char;
-
-SLKeyMap_List_Type SLKeyMap_List[SLANG_MAX_KEYMAPS];
-
-static SLang_Key_Type *malloc_key(unsigned char *str)
-{
- SLang_Key_Type *neew;
-
- if (NULL == (neew = (SLang_Key_Type *) SLmalloc(sizeof(SLang_Key_Type))))
- return NULL;
-
- SLMEMSET ((char *) neew, 0, sizeof (SLang_Key_Type));
- SLMEMCPY((char *) neew->str, (char *) str, (unsigned int) *str);
- return(neew);
-}
-
-static SLKeyMap_List_Type *add_keymap (char *name, SLang_Key_Type *map)
-{
- int i;
-
- for (i = 0; i < SLANG_MAX_KEYMAPS; i++)
- {
- if (SLKeyMap_List[i].keymap == NULL)
- {
- if (NULL == (name = SLang_create_slstring (name)))
- return NULL;
-
- SLKeyMap_List[i].keymap = map;
- SLKeyMap_List[i].name = name;
- return &SLKeyMap_List[i];
- }
- }
- SLang_Error = SL_UNKNOWN_ERROR;
- /* SLang_doerror ("Keymap quota exceeded."); */
- return NULL;
-}
-
-FVOID_STAR SLang_find_key_function(char *name, SLKeyMap_List_Type *keymap)
-{
- SLKeymap_Function_Type *fp = keymap -> functions;
- char ch = *name;
-
- while ((fp != NULL) && (fp->name != NULL))
- {
- if ((ch == *fp->name)
- && (0 == strcmp(fp->name, name)))
- return (FVOID_STAR) fp->f;
-
- fp++;
- }
- return NULL;
-}
-
-#ifdef REAL_UNIX_SYSTEM
-/* Expand termcap string specified by s. s as passed will have the format:
- * "XY)..." where XY represents a termcap keyname.
- */
-static char *process_termcap_string (char *s, char *str, int *ip, int imax)
-{
- char c[3], *val;
- int i;
-
- if ((0 == (c[0] = s[0]))
- || (0 == (c[1] = s[1]))
- || (s[2] != ')'))
- {
- SLang_verror (SL_SYNTAX_ERROR, "setkey: ^(%s is badly formed", s);
- return NULL;
- }
- s += 3;
-
- c[2] = 0;
- if ((NULL == (val = SLtt_tgetstr (c)))
- || (*val == 0))
- return NULL;
-
- i = *ip;
- while ((i < imax) && (*val != 0))
- {
- str[i++] = *val++;
- }
- *ip = i;
-
- return s;
-}
-#endif
-
-/* convert things like "^A" to 1 etc... The 0th char is the strlen INCLUDING
- * the length character itself.
- */
-char *SLang_process_keystring(char *s)
-{
- /* FIXME: v2.0, make this thread safe */
- static char str[32];
- unsigned char ch;
- int i;
-
- i = 1;
- while (*s != 0)
- {
- ch = (unsigned char) *s++;
- if (ch == '^')
- {
- ch = *s++;
- if (ch == 0)
- {
- if (i < 32)
- str[i++] = '^';
- break;
- }
-#ifdef REAL_UNIX_SYSTEM
- if (ch == '(')
- {
- s = process_termcap_string (s, str, &i, 32);
- if (s == NULL)
- {
- str[0] = 1;
- return str;
- }
- continue;
- }
-#endif
- ch = UPPER_CASE_KEY(ch);
- if (ch == '?') ch = 127; else ch = ch - 'A' + 1;
- }
-
- if (i >= 32) break;
- str[i++] = ch;
- }
-
- if (i > SLANG_MAX_KEYMAP_KEY_SEQ)
- {
- SLang_verror (SL_INVALID_PARM, "Key sequence is too long");
- return NULL;
- }
-
- str[0] = i;
- return(str);
-}
-
-static int key_string_compare (unsigned char *a, unsigned char *b, unsigned int len)
-{
- unsigned char *amax = a + len;
- int cha, chb, cha_up, chb_up;
-
- while (a < amax)
- {
- cha = *a++;
- chb = *b++;
-
- if (cha == chb) continue;
-
- cha_up = UPPER_CASE_KEY(cha);
- chb_up = UPPER_CASE_KEY(chb);
-
- if (cha_up == chb_up)
- {
- /* Use case-sensitive result. */
- return cha - chb;
- }
- /* Use case-insensitive result. */
- return cha_up - chb_up;
- }
- return 0;
-}
-
-static char *Define_Key_Error = "Inconsistency in define key.";
-
-/* This function also performs an insertion in an ordered way. */
-static int find_the_key (char *s, SLKeyMap_List_Type *kml, SLang_Key_Type **keyp)
-{
- unsigned char ch;
- unsigned int str_len;
- SLang_Key_Type *key, *last, *neew;
- unsigned char *str;
-
- *keyp = NULL;
-
- if (NULL == (str = (unsigned char *) SLang_process_keystring(s)))
- return -2;
-
- if (1 == (str_len = str[0]))
- return 0;
-
- ch = str[1];
- key = kml->keymap + ch;
-
- if (str_len == 2)
- {
- if (key->next != NULL)
- {
- SLang_doerror (Define_Key_Error);
- return -2;
- }
-
- if (key->type == SLKEY_F_INTERPRET)
- SLang_free_slstring (key->f.s);
-
- key->str[0] = str_len;
- key->str[1] = ch;
-
- *keyp = key;
- return 0;
- }
-
- /* insert the key definition */
- while (1)
- {
- int cmp;
- unsigned int key_len, len;
-
- last = key;
- key = key->next;
-
- if ((key != NULL) && (key->str != NULL))
- {
- len = key_len = key->str[0];
- if (len > str_len) len = str_len;
-
- cmp = key_string_compare (str + 1, key->str + 1, len - 1);
-
- if (cmp > 0)
- continue;
-
- if (cmp == 0)
- {
- if (key_len != str_len)
- {
- SLang_doerror (Define_Key_Error);
- return -2;
- }
-
- if (key->type == SLKEY_F_INTERPRET)
- SLang_free_slstring (key->f.s);
-
- *keyp = key;
- return 0;
- }
- /* Drop to cmp < 0 case */
- }
-
- if (NULL == (neew = malloc_key(str))) return -1;
-
- neew -> next = key;
- last -> next = neew;
-
- *keyp = neew;
- return 0;
- }
-}
-
-/* returns -2 if inconsistent, -1 if malloc error, 0 upon success */
-int SLkm_define_key (char *s, FVOID_STAR f, SLKeyMap_List_Type *kml)
-{
- SLang_Key_Type *key;
- unsigned int type = SLKEY_F_INTRINSIC;
- int ret;
-
- ret = find_the_key (s, kml, &key);
- if ((ret != 0) || (key == NULL))
- return ret;
-
- key->type = type;
- key->f.f = f;
- return 0;
-}
-
-int SLang_define_key (char *s, char *funct, SLKeyMap_List_Type *kml)
-{
- SLang_Key_Type *key;
- FVOID_STAR f;
- int ret;
-
- ret = find_the_key (s, kml, &key);
- if ((ret != 0) || (key == NULL))
- return ret;
-
- f = SLang_find_key_function(funct, kml);
-
- if (f == NULL) /* assume interpreted */
- {
- char *str = SLang_create_slstring (funct);
- if (str == NULL) return -1;
- key->type = SLKEY_F_INTERPRET;
- key->f.s = str;
- }
- else
- {
- key->type = SLKEY_F_INTRINSIC;
- key->f.f = f;
- }
- return 0;
-}
-
-int SLkm_define_keysym (char *s, unsigned int keysym, SLKeyMap_List_Type *kml)
-{
- SLang_Key_Type *key;
- int ret;
-
- ret = find_the_key (s, kml, &key);
-
- if ((ret != 0) || (key == NULL))
- return ret;
-
- key->type = SLKEY_F_KEYSYM;
- key->f.keysym = keysym;
- return 0;
-}
-
-SLang_Key_Type *SLang_do_key(SLKeyMap_List_Type *kml, int (*getkey)(void))
-{
- register SLang_Key_Type *key, *next, *kmax;
- unsigned int len;
- unsigned char input_ch;
- register unsigned char chup, chlow;
- unsigned char key_ch = 0;
-
- SLang_Last_Key_Char = (*getkey)();
- SLang_Key_TimeOut_Flag = 0;
-
- if (SLANG_GETKEY_ERROR == (unsigned int) SLang_Last_Key_Char)
- return NULL;
-
- input_ch = (unsigned char) SLang_Last_Key_Char;
-
- key = (SLang_Key_Type *) &((kml->keymap)[input_ch]);
-
- /* if the next one is null, then we know this MAY be it. */
- while (key->next == NULL)
- {
- if (key->type != 0)
- return key;
-
- /* Try its opposite case counterpart */
- chlow = LOWER_CASE_KEY(input_ch);
- if (input_ch == chlow)
- input_ch = UPPER_CASE_KEY(input_ch);
-
- key = kml->keymap + input_ch;
- if (key->type == 0)
- return NULL;
- }
-
- /* It appears to be a prefix character in a key sequence. */
-
- len = 1; /* already read one character */
- key = key->next; /* Now we are in the key list */
- kmax = NULL; /* set to end of list */
-
- while (1)
- {
- SLang_Key_TimeOut_Flag = 1;
- SLang_Last_Key_Char = (*getkey)();
- SLang_Key_TimeOut_Flag = 0;
-
- len++;
-
- if ((SLANG_GETKEY_ERROR == (unsigned int) SLang_Last_Key_Char)
- || SLKeyBoard_Quit)
- break;
-
- input_ch = (unsigned char) SLang_Last_Key_Char;
-
- chup = UPPER_CASE_KEY(input_ch); chlow = LOWER_CASE_KEY(input_ch);
-
- while (key != kmax)
- {
- if (key->str[0] > len)
- {
- key_ch = key->str[len];
- if (chup == UPPER_CASE_KEY(key_ch))
- break;
- }
- key = key->next;
- }
-
- if (key == kmax) break;
-
- /* If the input character is lowercase, check to see if there is
- * a lowercase match. If so, set key to it. Note: the
- * algorithm assumes the sorting performed by key_string_compare.
- */
- if (input_ch != key_ch)
- {
- next = key->next;
- while (next != kmax)
- {
- if (next->str[0] > len)
- {
- unsigned char next_ch = next->str[len];
- if (next_ch == input_ch)
- {
- key = next;
- break;
- }
- if (next_ch != chup)
- break;
- }
- next = next->next;
- }
- }
-
- /* Ok, we found the first position of a possible match. If it
- * is exact, we are done.
- */
- if ((unsigned int) key->str[0] == len + 1)
- return key;
-
- /* Apparantly, there are some ambiguities. Read next key to resolve
- * the ambiguity. Adjust kmax to encompass ambiguities.
- */
-
- next = key->next;
- while (next != kmax)
- {
- if ((unsigned int) next->str[0] > len)
- {
- key_ch = next->str[len];
- if (chup != UPPER_CASE_KEY(key_ch))
- break;
- }
- next = next->next;
- }
- kmax = next;
- }
-
- return NULL;
-}
-
-void SLang_undefine_key(char *s, SLKeyMap_List_Type *kml)
-{
- int n, i;
- SLang_Key_Type *key, *next, *last, *key_root, *keymap;
- unsigned char *str;
-
- keymap = kml -> keymap;
- if (NULL == (str = (unsigned char *) SLang_process_keystring(s)))
- return;
-
- if (0 == (n = *str++ - 1)) return;
- i = *str;
-
- last = key_root = (SLang_Key_Type *) &(keymap[i]);
- key = key_root->next;
-
- while (key != NULL)
- {
- next = key->next;
- if (0 == SLMEMCMP ((char *)(key->str + 1), (char *) str, n))
- {
- if (key->type == SLKEY_F_INTERPRET)
- SLang_free_slstring (key->f.s);
-
- SLfree((char *) key);
- last->next = next;
- }
- else last = key;
- key = next;
- }
-
- if (n == 1)
- {
- *key_root->str = 0;
- key_root->f.f = NULL;
- key_root->type = 0;
- }
-}
-
-char *SLang_make_keystring(unsigned char *s)
-{
- static char buf [3 * SLANG_MAX_KEYMAP_KEY_SEQ + 1];
- char *b;
- int n;
-
- n = *s++ - 1;
-
- if (n > SLANG_MAX_KEYMAP_KEY_SEQ)
- {
- SLang_verror (SL_INVALID_PARM, "Key sequence is too long");
- return NULL;
- }
-
- b = buf;
- while (n--)
- {
- if (*s < 32)
- {
- *b++ = '^';
- *b++ = *s + 'A' - 1;
- }
- else *b++ = *s;
- s++;
- }
- *b = 0;
- return(buf);
-}
-
-static SLang_Key_Type *copy_keymap(SLKeyMap_List_Type *kml)
-{
- int i;
- SLang_Key_Type *neew, *old, *new_root, *km;
-
- if (NULL == (new_root = (SLang_Key_Type *) SLcalloc(256, sizeof(SLang_Key_Type))))
- return NULL;
-
- if (kml == NULL) return new_root;
- km = kml->keymap;
-
- for (i = 0; i < 256; i++)
- {
- old = &(km[i]);
- neew = &(new_root[i]);
-
- if (old->type == SLKEY_F_INTERPRET)
- neew->f.s = SLang_create_slstring (old->f.s);
- else
- neew->f.f = old->f.f;
-
- neew->type = old->type;
- SLMEMCPY((char *) neew->str, (char *) old->str, (unsigned int) *old->str);
-
- old = old->next;
- while (old != NULL)
- {
- neew->next = malloc_key((unsigned char *) old->str);
- neew = neew->next;
-
- if (old->type == SLKEY_F_INTERPRET)
- neew->f.s = SLang_create_slstring (old->f.s);
- else
- neew->f.f = old->f.f;
-
- neew->type = old->type;
- old = old->next;
- }
- neew->next = NULL;
- }
- return(new_root);
-}
-
-SLKeyMap_List_Type *SLang_create_keymap(char *name, SLKeyMap_List_Type *map)
-{
- SLang_Key_Type *neew;
- SLKeyMap_List_Type *new_map;
-
- if ((NULL == (neew = copy_keymap(map)))
- || (NULL == (new_map = add_keymap(name, neew)))) return NULL;
-
- if (map != NULL) new_map -> functions = map -> functions;
-
- return new_map;
-}
-
-SLKeyMap_List_Type *SLang_find_keymap(char *name)
-{
- SLKeyMap_List_Type *kmap, *kmap_max;
-
- kmap = SLKeyMap_List;
- kmap_max = kmap + SLANG_MAX_KEYMAPS;
-
- while (kmap < kmap_max)
- {
- if ((kmap->name != NULL)
- && (0 == strcmp (kmap->name, name)))
- return kmap;
-
- kmap++;
- }
- return NULL;
-}
diff --git a/mdk-stage1/slang/slkeypad.c b/mdk-stage1/slang/slkeypad.c
deleted file mode 100644
index 524dc80fa..000000000
--- a/mdk-stage1/slang/slkeypad.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static SLKeyMap_List_Type *Keymap_List;
-
-int SLkp_init (void)
-{
- char esc_seq[10];
- int i;
-
- if (NULL == (Keymap_List = SLang_create_keymap ("_SLKeypad", NULL)))
- return -1;
-
- esc_seq[1] = 0;
- for (i = 1; i < 256; i++)
- {
- esc_seq[0] = (char) i;
- SLkm_define_keysym (esc_seq, i, Keymap_List);
- }
-
- /* Now add most common ones. */
-#ifndef IBMPC_SYSTEM
- SLkm_define_keysym ("^@", 0, Keymap_List);
-
- SLkm_define_keysym ("\033[A", SL_KEY_UP, Keymap_List);
- SLkm_define_keysym ("\033OA", SL_KEY_UP, Keymap_List);
- SLkm_define_keysym ("\033[B", SL_KEY_DOWN, Keymap_List);
- SLkm_define_keysym ("\033OB", SL_KEY_DOWN, Keymap_List);
- SLkm_define_keysym ("\033[C", SL_KEY_RIGHT, Keymap_List);
- SLkm_define_keysym ("\033OC", SL_KEY_RIGHT, Keymap_List);
- SLkm_define_keysym ("\033[D", SL_KEY_LEFT, Keymap_List);
- SLkm_define_keysym ("\033OD", SL_KEY_LEFT, Keymap_List);
- SLkm_define_keysym ("\033[2~", SL_KEY_IC, Keymap_List);
- SLkm_define_keysym ("\033[7~", SL_KEY_HOME, Keymap_List);
- SLkm_define_keysym ("\033[5~", SL_KEY_PPAGE, Keymap_List);
- SLkm_define_keysym ("\033[6~", SL_KEY_NPAGE, Keymap_List);
- SLkm_define_keysym ("\033[8~", SL_KEY_END, Keymap_List);
- SLkm_define_keysym ("\033[3~", SL_KEY_DELETE, Keymap_List);
-#else
- /* Note: This will not work if SLgetkey_map_to_ansi (1) has
- * been called.
- */
- SLkm_define_keysym ("^@\x48", SL_KEY_UP, Keymap_List );
- SLkm_define_keysym ("^@\x50", SL_KEY_DOWN, Keymap_List );
- SLkm_define_keysym ("^@\x4d", SL_KEY_RIGHT, Keymap_List );
- SLkm_define_keysym ("^@\x4b", SL_KEY_LEFT, Keymap_List );
- SLkm_define_keysym ("^@\x47", SL_KEY_HOME, Keymap_List );
- SLkm_define_keysym ("^@\x49", SL_KEY_PPAGE, Keymap_List );
- SLkm_define_keysym ("^@\x51", SL_KEY_NPAGE, Keymap_List );
- SLkm_define_keysym ("^@\x4f", SL_KEY_END, Keymap_List );
- SLkm_define_keysym ("^@\x52", SL_KEY_IC, Keymap_List );
- SLkm_define_keysym ("^@\x53", SL_KEY_DELETE, Keymap_List );
-
- SLkm_define_keysym ("\xE0\x48", SL_KEY_UP, Keymap_List );
- SLkm_define_keysym ("\xE0\x50", SL_KEY_DOWN, Keymap_List );
- SLkm_define_keysym ("\xE0\x4d", SL_KEY_RIGHT, Keymap_List );
- SLkm_define_keysym ("\xE0\x4b", SL_KEY_LEFT, Keymap_List );
- SLkm_define_keysym ("\xE0\x47", SL_KEY_HOME, Keymap_List );
- SLkm_define_keysym ("\xE0\x49", SL_KEY_PPAGE, Keymap_List );
- SLkm_define_keysym ("\xE0\x51", SL_KEY_NPAGE, Keymap_List );
- SLkm_define_keysym ("\xE0\x4f", SL_KEY_END, Keymap_List );
- SLkm_define_keysym ("\xE0\x52", SL_KEY_IC, Keymap_List );
- SLkm_define_keysym ("\xE0\x53", SL_KEY_DELETE, Keymap_List );
-
- strcpy (esc_seq, "^@ "); /* guarantees esc_seq[3] = 0. */
-
- for (i = 0x3b; i < 0x45; i++)
- {
- esc_seq [2] = i;
- SLkm_define_keysym (esc_seq, SL_KEY_F(i - 0x3a), Keymap_List);
- }
- esc_seq[2] = 0x57; SLkm_define_keysym (esc_seq, SL_KEY_F(11), Keymap_List);
- esc_seq[2] = 0x58; SLkm_define_keysym (esc_seq, SL_KEY_F(12), Keymap_List);
-#endif
-
-#ifdef REAL_UNIX_SYSTEM
- strcpy (esc_seq, "^(kX)");
- for (i = 0; i <= 9; i++)
- {
- esc_seq[3] = '0' + i;
- SLkm_define_keysym (esc_seq, SL_KEY_F(i), Keymap_List);
- }
- SLkm_define_keysym ("^(k;)", SL_KEY_F(10), Keymap_List);
-
- SLkm_define_keysym ("^(ku)", SL_KEY_UP, Keymap_List);
- SLkm_define_keysym ("^(kd)", SL_KEY_DOWN, Keymap_List);
- SLkm_define_keysym ("^(kl)", SL_KEY_LEFT, Keymap_List);
- SLkm_define_keysym ("^(kr)", SL_KEY_RIGHT, Keymap_List);
- SLkm_define_keysym ("^(kP)", SL_KEY_PPAGE, Keymap_List);
- SLkm_define_keysym ("^(kN)", SL_KEY_NPAGE, Keymap_List);
- SLkm_define_keysym ("^(kh)", SL_KEY_HOME, Keymap_List);
- SLkm_define_keysym ("^(@7)", SL_KEY_END, Keymap_List);
- SLkm_define_keysym ("^(K1)", SL_KEY_A1, Keymap_List);
- SLkm_define_keysym ("^(K3)", SL_KEY_A3, Keymap_List);
- SLkm_define_keysym ("^(K2)", SL_KEY_B2, Keymap_List);
- SLkm_define_keysym ("^(K4)", SL_KEY_C1, Keymap_List);
- SLkm_define_keysym ("^(K5)", SL_KEY_C3, Keymap_List);
- SLkm_define_keysym ("^(%0)", SL_KEY_REDO, Keymap_List);
- SLkm_define_keysym ("^(&8)", SL_KEY_UNDO, Keymap_List);
- SLkm_define_keysym ("^(kb)", SL_KEY_BACKSPACE, Keymap_List);
- SLkm_define_keysym ("^(@8)", SL_KEY_ENTER, Keymap_List);
- SLkm_define_keysym ("^(kD)", SL_KEY_DELETE, Keymap_List);
-#endif
-
- if (SLang_Error)
- return -1;
- return 0;
-}
-
-int SLkp_getkey (void)
-{
- SLang_Key_Type *key;
-
- key = SLang_do_key (Keymap_List, (int (*)(void)) SLang_getkey);
- if ((key == NULL) || (key->type != SLKEY_F_KEYSYM))
- {
- SLang_flush_input ();
- return SL_KEY_ERR;
- }
-
- return key->f.keysym;
-}
-
-int SLkp_define_keysym (char *keystr, unsigned int keysym)
-{
- if (SLkm_define_keysym (keystr, keysym, Keymap_List) < 0)
- return -1;
-
- return 0;
-}
-
-#if 0
-int main (int argc, char **argv)
-{
- int ch;
-
- SLtt_get_terminfo ();
-
- if (-1 == SLkp_init ())
- return 1;
-
- SLang_init_tty (-1, 0, 0);
-
- while ('q' != (ch = SLkp_getkey ()))
- {
- fprintf (stdout, "Keycode = %d\r\n", ch);
- fflush (stdout);
- }
-
- SLang_reset_tty ();
-
- return 0;
-}
-#endif
-
diff --git a/mdk-stage1/slang/sllimits.h b/mdk-stage1/slang/sllimits.h
deleted file mode 100644
index c4ae03b83..000000000
--- a/mdk-stage1/slang/sllimits.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-/* sllimits.h */
-
-/* slstring.c: Size of the hash table used for strings (prime numbers) */
-#ifdef __MSDOS_16BIT__
-# define SLSTRING_HASH_TABLE_SIZE 601
-# define SLASSOC_HASH_TABLE_SIZE 601
-#else
-# define SLSTRING_HASH_TABLE_SIZE 2909
-# define SLASSOC_HASH_TABLE_SIZE 2909
-#endif
-
-/* slang.c: maximum size of run time stack */
-#ifdef __MSDOS_16BIT__
-# define SLANG_MAX_STACK_LEN 500
-#else
-# define SLANG_MAX_STACK_LEN 2500
-#endif
-
-/* slang.c: This sets the size on the depth of function calls */
-#ifdef __MSDOS_16BIT__
-# define SLANG_MAX_RECURSIVE_DEPTH 50
-#else
-# define SLANG_MAX_RECURSIVE_DEPTH 250
-#endif
-
-/* slang.c: Size of the stack used for local variables */
-#ifdef __MSDOS_16BIT__
-# define SLANG_MAX_LOCAL_STACK 200
-#else
-# define SLANG_MAX_LOCAL_STACK 1024
-#endif
-
-/* slang.c: The size of the hash table used for local and global objects.
- * These should be prime numbers.
- */
-#define SLGLOBALS_HASH_TABLE_SIZE 2909
-#define SLLOCALS_HASH_TABLE_SIZE 73
-#define SLSTATIC_HASH_TABLE_SIZE 73
-
-/* Size of the keyboard buffer use by the ungetkey routines */
-#ifdef __MSDOS_16BIT__
-# define SL_MAX_INPUT_BUFFER_LEN 40
-#else
-# define SL_MAX_INPUT_BUFFER_LEN 1024
-#endif
-
-/* Maximum number of nested switch statements */
-#define SLANG_MAX_NESTED_SWITCH 10
-
-/* Size of the block stack (used in byte-compiling) */
-#define SLANG_MAX_BLOCK_STACK_LEN 50
-
-/* slfile.c: Max number of open file pointers */
-#ifdef __MSDOS_16BIT__
-# define SL_MAX_FILES 32
-#else
-# define SL_MAX_FILES 256
-#endif
diff --git a/mdk-stage1/slang/slmalloc.c b/mdk-stage1/slang/slmalloc.c
deleted file mode 100644
index be4ed6cae..000000000
--- a/mdk-stage1/slang/slmalloc.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#ifdef SL_MALLOC_DEBUG
-# undef SL_MALLOC_DEBUG
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef __alpha
-# define Chunk 8
-#else
-# define Chunk 4
-#endif
-
-static long Total_Allocated;
-static long Max_Single_Allocation;
-static long Max_Allocated;
-/* #define SLDEBUG_DOUT */
-
-#ifdef SLDEBUG_DOUT
-static FILE *dout;
-#endif
-
-void SLmalloc_dump_statistics (void)
-{
-#ifdef SLDEBUG_DOUT
- fflush (dout);
-#endif
- fprintf (stderr, "Total Allocated: %ld\nHighest single allocation: %ld\nHighest Total Allocated:%ld\n",
- Total_Allocated, Max_Single_Allocation, Max_Allocated);
-}
-
-static void register_at_exit_fun (void)
-{
- static int is_registered = 0;
- if (is_registered)
- return;
- is_registered = 1;
-
-#ifdef SLDEBUG_DOUT
- if (dout == NULL) dout = fopen ("malloc.out", "w");
-#endif
- SLang_add_cleanup_function (SLmalloc_dump_statistics);
-}
-
-static void fixup (unsigned char *p, unsigned long n, char *what)
-{
- register_at_exit_fun ();
-
- p += Chunk;
- *(p - 4)= (unsigned char) ((n >> 24) & 0xFF);
- *(p - 3) = (unsigned char) ((n >> 16) & 0xFF);
- *(p - 2) = (unsigned char) ((n >> 8) & 0xFF);
- *(p - 1) = (unsigned char) (n & 0xFF);
- *(p + (int) n) = 27;
- *(p + (int) (n + 1)) = 182;
- *(p + (int) (n + 2)) = 81;
- *(p + (int) (n + 3)) = 86;
- Total_Allocated += (long) n;
- if (Total_Allocated > Max_Allocated) Max_Allocated = Total_Allocated;
- if ((long) n > Max_Single_Allocation)
- Max_Single_Allocation = (long) n;
-
-#ifdef SLDEBUG_DOUT
- fprintf (dout, "ALLOC: %s\t%p %ld\n", what, p, (long) n);
-#else
- (void) what;
-#endif
-}
-
-static void SLmalloc_doerror (char *buf)
-{
- SLang_doerror (buf);
-}
-
-static int check_memory (unsigned char *p, char *what)
-{
- char buf[128];
- unsigned long n;
-
- register_at_exit_fun ();
-
- n = ((unsigned long) *(p - 4)) << 24;
- n |= ((unsigned long) *(p - 3)) << 16;
- n |= ((unsigned long) *(p - 2)) << 8;
- n |= (unsigned long) *(p - 1);
-
- if (n == 0xFFFFFFFFUL)
- {
- sprintf (buf, "%s: %p: Already FREE! Abort NOW.", what, (void*)p - Chunk);
- SLmalloc_doerror (buf);
- return -1;
- }
-
- if ((*(p + (int) n) != 27)
- || (*(p + (int) (n + 1)) != 182)
- || (*(p + (int) (n + 2)) != 81)
- || (*(p + (int) (n + 3)) != 86))
- {
- sprintf (buf, "\007%s: %p: Memory corrupt! Abort NOW.", what, (void*)p);
- SLmalloc_doerror (buf);
- return -1;
- }
-
- *(p - 4) = *(p - 3) = *(p - 2) = *(p - 1) = 0xFF;
-
- Total_Allocated -= (long) n;
- if (Total_Allocated < 0)
- {
- sprintf (buf, "\007%s: %p\nFreed %ld, Allocated is: %ld!\n",
- what, (void*)p, (long) n, Total_Allocated);
- SLang_doerror (buf);
- }
-#ifdef SLDEBUG_DOUT
- fprintf (dout, "FREE: %s:\t%p %ld\n", what, p, (long) n);
-#endif
- return 0;
-}
-
-void SLdebug_free (char *p)
-{
- if (p == NULL) return;
- if (-1 == check_memory ((unsigned char *) p, "FREE")) return;
-
- SLFREE (p - Chunk);
-}
-
-char *SLdebug_malloc (unsigned long n)
-{
- char *p;
-
- if ((p = (char *) SLMALLOC (n + 2 * Chunk)) == NULL) return NULL;
-
- fixup ((unsigned char *) p, n, "MALLOC");
- return p + Chunk;
-}
-
-char *SLdebug_realloc (char *p, unsigned long n)
-{
- if (-1 == check_memory ((unsigned char *) p, "REALLOC")) return NULL;
- if ((p = (char *) SLREALLOC (p - Chunk, n + 2 * Chunk)) == NULL) return NULL;
- fixup ((unsigned char *) p, n, "REALLOC");
- return p + Chunk;
-}
-
-char *SLdebug_calloc (unsigned long n, unsigned long size)
-{
- char *p;
- int m;
-
- /* This is tough -- hope this is a good assumption!! */
- if (size >= Chunk) m = 1; else m = Chunk;
-
- if ((p = (char *) SLCALLOC (n + m + m, size)) == NULL) return NULL;
- fixup ((unsigned char *) p, size * n, "CALLOC");
- return p + Chunk;
-}
-
diff --git a/mdk-stage1/slang/slmath.c b/mdk-stage1/slang/slmath.c
deleted file mode 100644
index 1d61e14d3..000000000
--- a/mdk-stage1/slang/slmath.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/* sin, cos, etc, for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <math.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef PI
-# undef PI
-#endif
-#define PI 3.14159265358979323846264338327950288
-
-#if defined(__unix__)
-#include <signal.h>
-#include <errno.h>
-
-#define SIGNAL SLsignal
-
-static void math_floating_point_exception (int sig)
-{
- sig = errno;
- if (SLang_Error == 0) SLang_Error = SL_FLOATING_EXCEPTION;
- (void) SIGNAL (SIGFPE, math_floating_point_exception);
- errno = sig;
-}
-#endif
-
-double SLmath_hypot (double x, double y)
-{
- double fr, fi, ratio;
-
- fr = fabs(x);
- fi = fabs(y);
-
- if (fr > fi)
- {
- ratio = y / x;
- x = fr * sqrt (1.0 + ratio * ratio);
- }
- else if (fi == 0.0) x = 0.0;
- else
- {
- ratio = x / y;
- x = fi * sqrt (1.0 + ratio * ratio);
- }
-
- return x;
-}
-
-/* usage here is a1 a2 ... an n x ==> a1x^n + a2 x ^(n - 1) + ... + an */
-static double math_poly (void)
-{
- int n;
- double xn = 1.0, sum = 0.0;
- double an, x;
-
- if ((SLang_pop_double(&x, NULL, NULL))
- || (SLang_pop_integer(&n))) return(0.0);
-
- while (n-- > 0)
- {
- if (SLang_pop_double(&an, NULL, NULL)) break;
- sum += an * xn;
- xn = xn * x;
- }
- return (double) sum;
-}
-
-static int double_math_op_result (int op, unsigned char a, unsigned char *b)
-{
- (void) op;
-
- if (a != SLANG_FLOAT_TYPE)
- *b = SLANG_DOUBLE_TYPE;
- else
- *b = a;
-
- return 1;
-}
-
-#ifdef HAVE_ASINH
-# define ASINH_FUN asinh
-#else
-# define ASINH_FUN my_asinh
-static double my_asinh (double x)
-{
- return log (x + sqrt (x*x + 1));
-}
-#endif
-#ifdef HAVE_ACOSH
-# define ACOSH_FUN acosh
-#else
-# define ACOSH_FUN my_acosh
-static double my_acosh (double x)
-{
- return log (x + sqrt(x*x - 1)); /* x >= 1 */
-}
-#endif
-#ifdef HAVE_ATANH
-# define ATANH_FUN atanh
-#else
-# define ATANH_FUN my_atanh
-static double my_atanh (double x)
-{
- return 0.5 * log ((1.0 + x)/(1.0 - x)); /* 0 <= x^2 < 1 */
-}
-#endif
-
-static int double_math_op (int op,
- unsigned char type, VOID_STAR ap, unsigned int na,
- VOID_STAR bp)
-{
- double *a, *b;
- unsigned int i;
- double (*fun) (double);
-
- (void) type;
- a = (double *) ap;
- b = (double *) bp;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLMATH_SINH:
- fun = sinh;
- break;
- case SLMATH_COSH:
- fun = cosh;
- break;
- case SLMATH_TANH:
- fun = tanh;
- break;
- case SLMATH_TAN:
- fun = tan;
- break;
- case SLMATH_ASIN:
- fun = asin;
- break;
- case SLMATH_ACOS:
- fun = acos;
- break;
- case SLMATH_ATAN:
- fun = atan;
- break;
- case SLMATH_EXP:
- fun = exp;
- break;
- case SLMATH_LOG:
- fun = log;
- break;
- case SLMATH_LOG10:
- fun = log10;
- break;
- case SLMATH_SQRT:
- fun = sqrt;
- break;
- case SLMATH_SIN:
- fun = sin;
- break;
- case SLMATH_COS:
- fun = cos;
- break;
-
- case SLMATH_ASINH:
- fun = ASINH_FUN;
- break;
- case SLMATH_ATANH:
- fun = ATANH_FUN;
- break;
- case SLMATH_ACOSH:
- fun = ACOSH_FUN;
- break;
-
- case SLMATH_CONJ:
- case SLMATH_REAL:
- for (i = 0; i < na; i++)
- b[i] = a[i];
- return 1;
- case SLMATH_IMAG:
- for (i = 0; i < na; i++)
- b[i] = 0.0;
- return 1;
- }
-
- for (i = 0; i < na; i++)
- b[i] = (*fun) (a[i]);
-
- return 1;
-}
-
-static int float_math_op (int op,
- unsigned char type, VOID_STAR ap, unsigned int na,
- VOID_STAR bp)
-{
- float *a, *b;
- unsigned int i;
- double (*fun) (double);
-
- (void) type;
- a = (float *) ap;
- b = (float *) bp;
-
-
- switch (op)
- {
- default:
- return 0;
-
- case SLMATH_SINH:
- fun = sinh;
- break;
- case SLMATH_COSH:
- fun = cosh;
- break;
- case SLMATH_TANH:
- fun = tanh;
- break;
- case SLMATH_TAN:
- fun = tan;
- break;
- case SLMATH_ASIN:
- fun = asin;
- break;
- case SLMATH_ACOS:
- fun = acos;
- break;
- case SLMATH_ATAN:
- fun = atan;
- break;
- case SLMATH_EXP:
- fun = exp;
- break;
- case SLMATH_LOG:
- fun = log;
- break;
- case SLMATH_LOG10:
- fun = log10;
- break;
- case SLMATH_SQRT:
- fun = sqrt;
- break;
- case SLMATH_SIN:
- fun = sin;
- break;
- case SLMATH_COS:
- fun = cos;
- break;
-
- case SLMATH_ASINH:
- fun = ASINH_FUN;
- break;
- case SLMATH_ATANH:
- fun = ATANH_FUN;
- break;
- case SLMATH_ACOSH:
- fun = ACOSH_FUN;
- break;
-
- case SLMATH_CONJ:
- case SLMATH_REAL:
- for (i = 0; i < na; i++)
- b[i] = a[i];
- return 1;
- case SLMATH_IMAG:
- for (i = 0; i < na; i++)
- b[i] = 0.0;
- return 1;
- }
-
- for (i = 0; i < na; i++)
- b[i] = (float) (*fun) ((double) a[i]);
-
- return 1;
-}
-
-static int generic_math_op (int op,
- unsigned char type, VOID_STAR ap, unsigned int na,
- VOID_STAR bp)
-{
- double *b;
- unsigned int i;
- SLang_To_Double_Fun_Type to_double;
- double (*fun) (double);
- unsigned int da;
- char *a;
-
- if (NULL == (to_double = SLarith_get_to_double_fun (type, &da)))
- return 0;
-
- b = (double *) bp;
- a = (char *) ap;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLMATH_SINH:
- fun = sinh;
- break;
- case SLMATH_COSH:
- fun = cosh;
- break;
- case SLMATH_TANH:
- fun = tanh;
- break;
- case SLMATH_TAN:
- fun = tan;
- break;
- case SLMATH_ASIN:
- fun = asin;
- break;
- case SLMATH_ACOS:
- fun = acos;
- break;
- case SLMATH_ATAN:
- fun = atan;
- break;
- case SLMATH_EXP:
- fun = exp;
- break;
- case SLMATH_LOG:
- fun = log;
- break;
- case SLMATH_LOG10:
- fun = log10;
- break;
- case SLMATH_SQRT:
- fun = sqrt;
- break;
- case SLMATH_SIN:
- fun = sin;
- break;
- case SLMATH_COS:
- fun = cos;
- break;
-
- case SLMATH_ASINH:
- fun = ASINH_FUN;
- break;
- case SLMATH_ATANH:
- fun = ATANH_FUN;
- break;
- case SLMATH_ACOSH:
- fun = ACOSH_FUN;
- break;
-
-
- case SLMATH_CONJ:
- case SLMATH_REAL:
- for (i = 0; i < na; i++)
- {
- b[i] = to_double((VOID_STAR) a);
- a += da;
- }
- return 1;
-
- case SLMATH_IMAG:
- for (i = 0; i < na; i++)
- b[i] = 0.0;
- return 1;
- }
-
- for (i = 0; i < na; i++)
- {
- b[i] = (*fun) (to_double ((VOID_STAR) a));
- a += da;
- }
-
- return 1;
-}
-
-#if SLANG_HAS_COMPLEX
-static int complex_math_op_result (int op, unsigned char a, unsigned char *b)
-{
- (void) a;
- switch (op)
- {
- default:
- *b = SLANG_COMPLEX_TYPE;
- break;
-
- case SLMATH_REAL:
- case SLMATH_IMAG:
- *b = SLANG_DOUBLE_TYPE;
- break;
- }
- return 1;
-}
-
-static int complex_math_op (int op,
- unsigned char type, VOID_STAR ap, unsigned int na,
- VOID_STAR bp)
-{
- double *a, *b;
- unsigned int i;
- unsigned int na2 = na * 2;
- double *(*fun) (double *, double *);
-
- (void) type;
- a = (double *) ap;
- b = (double *) bp;
-
- switch (op)
- {
- default:
- return 0;
-
- case SLMATH_REAL:
- for (i = 0; i < na; i++)
- b[i] = a[2 * i];
- return 1;
-
- case SLMATH_IMAG:
- for (i = 0; i < na; i++)
- b[i] = a[2 * i + 1];
- return 1;
-
- case SLMATH_CONJ:
- for (i = 0; i < na2; i += 2)
- {
- b[i] = a[i];
- b[i+1] = -a[i+1];
- }
- return 1;
-
- case SLMATH_ATANH:
- fun = SLcomplex_atanh;
- break;
- case SLMATH_ACOSH:
- fun = SLcomplex_acosh;
- break;
- case SLMATH_ASINH:
- fun = SLcomplex_asinh;
- break;
- case SLMATH_EXP:
- fun = SLcomplex_exp;
- break;
- case SLMATH_LOG:
- fun = SLcomplex_log;
- break;
- case SLMATH_LOG10:
- fun = SLcomplex_log10;
- break;
- case SLMATH_SQRT:
- fun = SLcomplex_sqrt;
- break;
- case SLMATH_SIN:
- fun = SLcomplex_sin;
- break;
- case SLMATH_COS:
- fun = SLcomplex_cos;
- break;
- case SLMATH_SINH:
- fun = SLcomplex_sinh;
- break;
- case SLMATH_COSH:
- fun = SLcomplex_cosh;
- break;
- case SLMATH_TANH:
- fun = SLcomplex_tanh;
- break;
- case SLMATH_TAN:
- fun = SLcomplex_tan;
- break;
- case SLMATH_ASIN:
- fun = SLcomplex_asin;
- break;
- case SLMATH_ACOS:
- fun = SLcomplex_acos;
- break;
- case SLMATH_ATAN:
- fun = SLcomplex_atan;
- break;
- }
-
- for (i = 0; i < na2; i += 2)
- (void) (*fun) (b + i, a + i);
-
- return 1;
-}
-#endif
-
-static SLang_DConstant_Type DConst_Table [] =
-{
- MAKE_DCONSTANT("E", 2.718281828459045),
- MAKE_DCONSTANT("PI", 3.14159265358979323846264338327950288),
- SLANG_END_DCONST_TABLE
-};
-
-static SLang_Math_Unary_Type SLmath_Table [] =
-{
- MAKE_MATH_UNARY("sinh", SLMATH_SINH),
- MAKE_MATH_UNARY("asinh", SLMATH_ASINH),
- MAKE_MATH_UNARY("cosh", SLMATH_COSH),
- MAKE_MATH_UNARY("acosh", SLMATH_ACOSH),
- MAKE_MATH_UNARY("tanh", SLMATH_TANH),
- MAKE_MATH_UNARY("atanh", SLMATH_ATANH),
- MAKE_MATH_UNARY("sin", SLMATH_SIN),
- MAKE_MATH_UNARY("cos", SLMATH_COS),
- MAKE_MATH_UNARY("tan", SLMATH_TAN),
- MAKE_MATH_UNARY("atan", SLMATH_ATAN),
- MAKE_MATH_UNARY("acos", SLMATH_ACOS),
- MAKE_MATH_UNARY("asin", SLMATH_ASIN),
- MAKE_MATH_UNARY("exp", SLMATH_EXP),
- MAKE_MATH_UNARY("log", SLMATH_LOG),
- MAKE_MATH_UNARY("sqrt", SLMATH_SQRT),
- MAKE_MATH_UNARY("log10", SLMATH_LOG10),
-#if SLANG_HAS_COMPLEX
- MAKE_MATH_UNARY("Real", SLMATH_REAL),
- MAKE_MATH_UNARY("Imag", SLMATH_IMAG),
- MAKE_MATH_UNARY("Conj", SLMATH_CONJ),
-#endif
- SLANG_END_MATH_UNARY_TABLE
-};
-
-static SLang_Intrin_Fun_Type SLang_Math_Table [] =
-{
- MAKE_INTRINSIC_0("polynom", math_poly, SLANG_DOUBLE_TYPE),
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_slmath (void)
-{
- unsigned char *int_types;
-
-#if defined(__unix__)
- (void) SIGNAL (SIGFPE, math_floating_point_exception);
-#endif
-
- int_types = _SLarith_Arith_Types;
-
- while (*int_types != SLANG_FLOAT_TYPE)
- {
- if (-1 == SLclass_add_math_op (*int_types, generic_math_op, double_math_op_result))
- return -1;
- int_types++;
- }
-
- if ((-1 == SLclass_add_math_op (SLANG_FLOAT_TYPE, float_math_op, double_math_op_result))
- || (-1 == SLclass_add_math_op (SLANG_DOUBLE_TYPE, double_math_op, double_math_op_result))
-#if SLANG_HAS_COMPLEX
- || (-1 == SLclass_add_math_op (SLANG_COMPLEX_TYPE, complex_math_op, complex_math_op_result))
-#endif
- )
- return -1;
-
- if ((-1 == SLadd_math_unary_table (SLmath_Table, "__SLMATH__"))
- || (-1 == SLadd_intrin_fun_table (SLang_Math_Table, NULL))
- || (-1 == SLadd_dconstant_table (DConst_Table, NULL)))
- return -1;
-
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slmemchr.c b/mdk-stage1/slang/slmemchr.c
deleted file mode 100644
index 1417bc549..000000000
--- a/mdk-stage1/slang/slmemchr.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines. When available, I
- use system rouines. For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-char *SLmemchr(register char *p, register char c, register int n)
-{
- int n2;
- register char *pmax;
-
- pmax = p + (n - 32);
-
- while (p <= pmax)
- {
- if ((*p == c) || (*++p == c) || (*++p == c) || (*++p == c)
- || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
- || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
- || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
- || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
- || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
- || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
- || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c))
- return p;
- p++;
- }
-
- n2 = n % 32;
-
- while (n2--)
- {
- if (*p == c) return p;
- p++;
- }
- return(NULL);
-}
diff --git a/mdk-stage1/slang/slmemcmp.c b/mdk-stage1/slang/slmemcmp.c
deleted file mode 100644
index c5ed50095..000000000
--- a/mdk-stage1/slang/slmemcmp.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines. When available, I
- use system rouines. For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* This is an UNSIGNED comparison designed for systems that either do not have
-* this function or performed a signed comparison (SunOS)
-*/
-int SLmemcmp(register char *s1, register char *s2, int n)
-{
- register int cmp;
- register char *s1max;
-
- s1max = s1 + (n - 32);
-
- while (s1 <= s1max)
- {
- if (*s1 != *s2) return ((unsigned char) *s1 - (unsigned char) *s2);
- if (*(s1 + 1) != *(s2 + 1)) return ((unsigned char) *(s1 + 1) - (unsigned char) *(s2 + 1));
- if (*(s1 + 2) != *(s2 + 2)) return ((unsigned char) *(s1 + 2) - (unsigned char) *(s2 + 2));
- if (*(s1 + 3) != *(s2 + 3)) return ((unsigned char) *(s1 + 3) - (unsigned char) *(s2 + 3));
- if (*(s1 + 4) != *(s2 + 4)) return ((unsigned char) *(s1 + 4) - (unsigned char) *(s2 + 4));
- if (*(s1 + 5) != *(s2 + 5)) return ((unsigned char) *(s1 + 5) - (unsigned char) *(s2 + 5));
- if (*(s1 + 6) != *(s2 + 6)) return ((unsigned char) *(s1 + 6) - (unsigned char) *(s2 + 6));
- if (*(s1 + 7) != *(s2 + 7)) return ((unsigned char) *(s1 + 7) - (unsigned char) *(s2 + 7));
- if (*(s1 + 8) != *(s2 + 8)) return ((unsigned char) *(s1 + 8) - (unsigned char) *(s2 + 8));
- if (*(s1 + 9) != *(s2 + 9)) return ((unsigned char) *(s1 + 9) - (unsigned char) *(s2 + 9));
- if (*(s1 + 10) != *(s2 + 10)) return ((unsigned char) *(s1 + 10) - (unsigned char) *(s2 + 10));
- if (*(s1 + 11) != *(s2 + 11)) return ((unsigned char) *(s1 + 11) - (unsigned char) *(s2 + 11));
- if (*(s1 + 12) != *(s2 + 12)) return ((unsigned char) *(s1 + 12) - (unsigned char) *(s2 + 12));
- if (*(s1 + 13) != *(s2 + 13)) return ((unsigned char) *(s1 + 13) - (unsigned char) *(s2 + 13));
- if (*(s1 + 14) != *(s2 + 14)) return ((unsigned char) *(s1 + 14) - (unsigned char) *(s2 + 14));
- if (*(s1 + 15) != *(s2 + 15)) return ((unsigned char) *(s1 + 15) - (unsigned char) *(s2 + 15));
- if (*(s1 + 16) != *(s2 + 16)) return ((unsigned char) *(s1 + 16) - (unsigned char) *(s2 + 16));
- if (*(s1 + 17) != *(s2 + 17)) return ((unsigned char) *(s1 + 17) - (unsigned char) *(s2 + 17));
- if (*(s1 + 18) != *(s2 + 18)) return ((unsigned char) *(s1 + 18) - (unsigned char) *(s2 + 18));
- if (*(s1 + 19) != *(s2 + 19)) return ((unsigned char) *(s1 + 19) - (unsigned char) *(s2 + 19));
- if (*(s1 + 20) != *(s2 + 20)) return ((unsigned char) *(s1 + 20) - (unsigned char) *(s2 + 20));
- if (*(s1 + 21) != *(s2 + 21)) return ((unsigned char) *(s1 + 21) - (unsigned char) *(s2 + 21));
- if (*(s1 + 22) != *(s2 + 22)) return ((unsigned char) *(s1 + 22) - (unsigned char) *(s2 + 22));
- if (*(s1 + 23) != *(s2 + 23)) return ((unsigned char) *(s1 + 23) - (unsigned char) *(s2 + 23));
- if (*(s1 + 24) != *(s2 + 24)) return ((unsigned char) *(s1 + 24) - (unsigned char) *(s2 + 24));
- if (*(s1 + 25) != *(s2 + 25)) return ((unsigned char) *(s1 + 25) - (unsigned char) *(s2 + 25));
- if (*(s1 + 26) != *(s2 + 26)) return ((unsigned char) *(s1 + 26) - (unsigned char) *(s2 + 26));
- if (*(s1 + 27) != *(s2 + 27)) return ((unsigned char) *(s1 + 27) - (unsigned char) *(s2 + 27));
- if (*(s1 + 28) != *(s2 + 28)) return ((unsigned char) *(s1 + 28) - (unsigned char) *(s2 + 28));
- if (*(s1 + 29) != *(s2 + 29)) return ((unsigned char) *(s1 + 29) - (unsigned char) *(s2 + 29));
- if (*(s1 + 30) != *(s2 + 30)) return ((unsigned char) *(s1 + 30) - (unsigned char) *(s2 + 30));
- if (*(s1 + 31) != *(s2 + 31)) return ((unsigned char) *(s1 + 31) - (unsigned char) *(s2 + 31));
- s1 += 32; s2 += 32;
- }
-
- s1max = s1 + (n % 32);
-
- while (s1 < s1max)
- {
- cmp = (unsigned char) *s1 - (unsigned char) *s2;
- if (cmp) return(cmp);
- s1++;
- s2++;
- }
-
- return(0);
-}
diff --git a/mdk-stage1/slang/slmemcpy.c b/mdk-stage1/slang/slmemcpy.c
deleted file mode 100644
index e8665e4c6..000000000
--- a/mdk-stage1/slang/slmemcpy.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines. When available, I
- use system rouines. For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-char *SLmemcpy(char *s1, char *s2, int n)
-{
-#if defined(__BORLANDC__) && defined(__MSDOS__)
- asm mov ax, ds
- asm mov bx, si
- asm mov dx, di
- asm mov cx, n
- asm les di, s1
- asm lds si, s2
- asm cld
- asm rep movsb
- asm mov ds, ax
- asm mov si, bx
- asm mov di, dx
- return(s1);
-
-#else
- register char *smax, *s = s1;
- int n2;
-
- n2 = n % 4;
- smax = s + (n - 4);
- while (s <= smax)
- {
- *s = *s2; *(s + 1) = *(s2 + 1); *(s + 2) = *(s2 + 2); *(s + 3) = *(s2 + 3);
- s += 4;
- s2 += 4;
- }
- while (n2--) *s++ = *s2++;
- return(s1);
-#endif
-}
diff --git a/mdk-stage1/slang/slmemset.c b/mdk-stage1/slang/slmemset.c
deleted file mode 100644
index 3851663c5..000000000
--- a/mdk-stage1/slang/slmemset.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines. When available, I
- use system rouines. For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-void SLmemset(char *p, char space, int n)
-{
-#if defined(__BORLANDC__) && defined(__MSDOS__)
- asm mov al, space
- asm mov dx, di
- asm mov cx, n
- asm les di, p
- asm cld
- asm rep stosb
- asm mov di, dx
-#else
- register char *pmax;
-
- pmax = p + (n - 4);
- n = n % 4;
- while (p <= pmax)
- {
- *p++ = space; *p++ = space; *p++ = space; *p++= space;
- }
- while (n--) *p++ = space;
-#endif
-}
diff --git a/mdk-stage1/slang/slmisc.c b/mdk-stage1/slang/slmisc.c
deleted file mode 100644
index ccc7a9bdf..000000000
--- a/mdk-stage1/slang/slmisc.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define DEBUG_MALLOC 0
-
-#if DEBUG_MALLOC
-# define SLREALLOC_FUN SLdebug_realloc
-# define SLMALLOC_FUN SLdebug_malloc
-# define SLFREE_FUN SLdebug_free
-#else
-# define SLREALLOC_FUN SLREALLOC
-# define SLMALLOC_FUN SLMALLOC
-# define SLFREE_FUN SLFREE
-#endif
-
-/* Version information goes here since this file is always needed. */
-int SLang_Version = SLANG_VERSION;
-char *SLang_Version_String = SLANG_VERSION_STRING;
-
-char *SLmake_string(char *str)
-{
- return SLmake_nstring(str, strlen (str));
-}
-
-char *SLmake_nstring (char *str, unsigned int n)
-{
- char *ptr;
-
- if (NULL == (ptr = SLmalloc(n + 1)))
- {
- return NULL;
- }
- SLMEMCPY (ptr, str, n);
- ptr[n] = 0;
- return(ptr);
-}
-
-void SLmake_lut (unsigned char *lut, unsigned char *range, unsigned char reverse)
-{
- register unsigned char *l = lut, *lmax = lut + 256;
- int i, r1, r2;
-
- while (l < lmax) *l++ = reverse;
- reverse = !reverse;
-
- r1 = *range++;
- while (r1)
- {
- r2 = *range++;
- if ((r2 == '-') && (*range != 0))
- {
- r2 = *range++;
- for (i = r1; i <= r2; i++) lut[i] = reverse;
- r1 = *range++;
- continue;
- }
- lut[r1] = reverse;
- r1 = r2;
- }
-}
-
-char *SLmalloc (unsigned int len)
-{
- char *p;
-
- p = (char *) SLMALLOC_FUN (len);
- if (p == NULL)
- SLang_Error = SL_MALLOC_ERROR;
-
- return p;
-}
-
-void SLfree (char *p)
-{
- if (p != NULL) SLFREE_FUN (p);
-}
-
-char *SLrealloc (char *p, unsigned int len)
-{
- if (len == 0)
- {
- SLfree (p);
- return NULL;
- }
-
- if (p == NULL) p = SLmalloc (len);
- else
- {
- p = (char *)SLREALLOC_FUN (p, len);
- if (p == NULL)
- SLang_Error = SL_MALLOC_ERROR;
- }
- return p;
-}
-
-char *SLcalloc (unsigned int nelems, unsigned int len)
-{
- char *p;
-
- len = nelems * len;
- p = SLmalloc (len);
- if (p != NULL) SLMEMSET (p, 0, len);
- return p;
-}
-
-/* p and ch may point to the same buffer */
-char *_SLexpand_escaped_char(char *p, char *ch)
-{
- int i = 0;
- int max = 0, num, base = 0;
- char ch1;
-
- ch1 = *p++;
-
- switch (ch1)
- {
- default: num = ch1; break;
- case 'n': num = '\n'; break;
- case 't': num = '\t'; break;
- case 'v': num = '\v'; break;
- case 'b': num = '\b'; break;
- case 'r': num = '\r'; break;
- case 'f': num = '\f'; break;
- case 'E': case 'e': num = 27; break;
- case 'a': num = 7;
- break;
-
- /* octal */
- case '0': case '1': case '2': case '3':
- case '4': case '5': case '6': case '7':
- max = '7';
- base = 8; i = 2; num = ch1 - '0';
- break;
-
- case 'd': /* decimal -- S-Lang extension */
- base = 10;
- i = 3;
- max = '9';
- num = 0;
- break;
-
- case 'x': /* hex */
- base = 16;
- max = '9';
- i = 2;
- num = 0;
- break;
- }
-
- while (i--)
- {
- ch1 = *p;
-
- if ((ch1 <= max) && (ch1 >= '0'))
- {
- num = base * num + (ch1 - '0');
- }
- else if (base == 16)
- {
- ch1 |= 0x20;
- if ((ch1 < 'a') || ((ch1 > 'f'))) break;
- num = base * num + 10 + (ch1 - 'a');
- }
- else break;
- p++;
- }
-
- *ch = (char) num;
- return p;
-}
-
-/* s and t could represent the same space */
-void SLexpand_escaped_string (register char *s, register char *t,
- register char *tmax)
-{
- char ch;
-
- while (t < tmax)
- {
- ch = *t++;
- if (ch == '\\')
- {
- t = _SLexpand_escaped_char (t, &ch);
- }
- *s++ = ch;
- }
- *s = 0;
-}
-
-int SLextract_list_element (char *list, unsigned int nth, char delim,
- char *elem, unsigned int buflen)
-{
- char *el, *elmax;
- char ch;
-
- while (nth > 0)
- {
- while ((0 != (ch = *list)) && (ch != delim))
- list++;
-
- if (ch == 0) return -1;
-
- list++;
- nth--;
- }
-
- el = elem;
- elmax = el + (buflen - 1);
-
- while ((0 != (ch = *list)) && (ch != delim) && (el < elmax))
- *el++ = *list++;
- *el = 0;
-
- return 0;
-}
-
-#ifndef HAVE_VSNPRINTF
-int _SLvsnprintf (char *buf, unsigned int buflen, char *fmt, va_list ap)
-{
-#if 1
- unsigned int len;
-
- /* On some systems vsprintf returns useless information. So, punt */
- vsprintf (buf, fmt, ap);
- len = strlen (buf);
- if (len >= buflen)
- {
- SLang_exit_error ("\
-Your system lacks the vsnprintf system call and vsprintf overflowed a buffer.\n\
-The integrity of this program has been violated.\n");
- return EOF; /* NOT reached */
- }
- return (int)len;
-#else
- int status;
-
- status = vsprintf (buf, fmt, ap);
- if (status >= (int) buflen)
- {
- /* If we are lucky, we will get this far. The real solution is to
- * provide a working version of vsnprintf
- */
- SLang_exit_error ("\
-Your system lacks the vsnprintf system call and vsprintf overflowed a buffer.\n\
-The integrity of this program has been violated.\n");
- return EOF; /* NOT reached */
- }
- return status;
-#endif
-}
-#endif
-
-#ifndef HAVE_SNPRINTF
-int _SLsnprintf (char *buf, unsigned int buflen, char *fmt, ...)
-{
- int status;
-
- va_list ap;
-
- va_start (ap, fmt);
- status = _SLvsnprintf (buf, buflen, fmt, ap);
- va_end (ap);
-
- return status;
-}
-#endif
-
-typedef struct _Cleanup_Function_Type
-{
- struct _Cleanup_Function_Type *next;
- void (*f)(void);
-}
-Cleanup_Function_Type;
-
-static Cleanup_Function_Type *Cleanup_Function_List;
-
-static void cleanup_slang (void)
-{
- while (Cleanup_Function_List != NULL)
- {
- Cleanup_Function_Type *next = Cleanup_Function_List->next;
- (*Cleanup_Function_List->f)();
- SLFREE_FUN ((char *) Cleanup_Function_List);
- Cleanup_Function_List = next;
- }
-}
-
-#ifndef HAVE_ATEXIT
-# ifdef HAVE_ON_EXIT
-static void on_exit_cleanup_slang (int arg_unused)
-{
- (void) arg_unused;
- cleanup_slang ();
-}
-# endif
-#endif
-
-int SLang_add_cleanup_function (void (*f)(void))
-{
- Cleanup_Function_Type *l;
-
- l = (Cleanup_Function_Type *) SLMALLOC_FUN (sizeof (Cleanup_Function_Type));
- if (l == NULL)
- return -1;
-
- l->f = f;
- l->next = Cleanup_Function_List;
-
- if (Cleanup_Function_List == NULL)
- {
-#ifdef HAVE_ATEXIT
- (void) atexit (cleanup_slang);
-#else
-# ifdef HAVE_ON_EXIT
- (void) on_exit (on_exit_cleanup_slang, 0);
-# endif
-#endif
- }
- Cleanup_Function_List = l;
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slnspace.c b/mdk-stage1/slang/slnspace.c
deleted file mode 100644
index 174ba7c81..000000000
--- a/mdk-stage1/slang/slnspace.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* slnspace.c --- Name Space implementation */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static SLang_NameSpace_Type *Namespace_Tables;
-
-static SLang_NameSpace_Type *find_name_table (char *name)
-{
- SLang_NameSpace_Type *table_list;
-
- table_list = Namespace_Tables;
- while (table_list != NULL)
- {
- if (0 == strcmp (table_list->name, name))
- break;
- table_list = table_list->next;
- }
- return table_list;
-}
-
-SLang_NameSpace_Type *_SLns_find_namespace (char *name)
-{
- SLang_NameSpace_Type *table_list;
-
- table_list = Namespace_Tables;
- while (table_list != NULL)
- {
- if ((table_list->namespace_name != NULL)
- && (0 == strcmp (table_list->namespace_name, name)))
- break;
- table_list = table_list->next;
- }
- return table_list;
-}
-
-SLang_NameSpace_Type *_SLns_allocate_namespace (char *name, unsigned int size)
-{
- SLang_NameSpace_Type *table_list;
- SLang_Name_Type **nt;
-
- if (NULL != (table_list = find_name_table (name)))
- return table_list;
-
- if (NULL == (name = SLang_create_slstring (name)))
- return NULL;
-
- if (NULL == (table_list = (SLang_NameSpace_Type *)
- SLmalloc (sizeof (SLang_NameSpace_Type))))
- {
- SLang_free_slstring (name);
- return NULL;
- }
-
- if (NULL == (nt = (SLang_Name_Type **) SLmalloc (sizeof (SLang_Name_Type *) * size)))
- {
- SLang_free_slstring (name);
- SLfree ((char *)table_list);
- return NULL;
- }
-
- memset ((char *)nt, 0, size * sizeof (SLang_Name_Type *));
- memset ((char *) table_list, 0, sizeof (SLang_NameSpace_Type));
-
- table_list->name = name;
- table_list->table = nt;
- table_list->table_size = size;
-
- table_list->next = Namespace_Tables;
- Namespace_Tables = table_list;
-
- return table_list;
-}
-
-int _SLns_set_namespace_name (SLang_NameSpace_Type *t, char *name)
-{
- SLang_NameSpace_Type *t1;
-
- t1 = _SLns_find_namespace (name);
- if (t1 == NULL)
- t1 = t;
-
- if ((t != t1) || (*name == 0))
- {
- SLang_verror (SL_INTRINSIC_ERROR, "Namespace \"%s\" already exists",
- name);
- return -1;
- }
-
- if (NULL == (name = SLang_create_slstring (name)))
- return -1;
-
- SLang_free_slstring (t->namespace_name); /* NULL ok */
- t->namespace_name = name;
-
- return 0;
-}
-
-SLang_Array_Type *_SLnspace_apropos (SLang_NameSpace_Type *ns, char *pat, unsigned int what)
-{
- SLang_Array_Type *at;
- unsigned int table_size;
- SLang_Name_Type *t, **table;
- int num_matches;
- unsigned int i;
- SLRegexp_Type rexp;
- unsigned char rbuf[512];
- unsigned int two;
-
- at = NULL;
-
- if ((ns == NULL)
- || ((table = ns->table) == NULL))
- return NULL;
-
- memset ((char *) &rexp, 0, sizeof (SLRegexp_Type));
- rexp.case_sensitive = 1;
- rexp.buf = rbuf;
- rexp.buf_len = sizeof (rbuf);
- rexp.pat = (unsigned char *)pat;
-
- if (0 != SLang_regexp_compile (&rexp))
- {
- SLang_verror (SL_INVALID_PARM, "Invalid regular expression: %s", pat);
- return NULL;
- }
-
- table_size = ns->table_size;
-
- two = 2;
- while (two != 0)
- {
- two--;
-
- num_matches = 0;
- for (i = 0; i < table_size; i++)
- {
- t = table[i];
- while (t != NULL)
- {
- unsigned int flags;
- char *name = t->name;
-
- switch (t->name_type)
- {
- case SLANG_GVARIABLE:
- flags = 8;
- break;
-
- case SLANG_ICONSTANT:
- case SLANG_DCONSTANT:
- case SLANG_RVARIABLE:
- case SLANG_IVARIABLE:
- flags = 4;
- break;
-
- case SLANG_INTRINSIC:
- case SLANG_MATH_UNARY:
- case SLANG_APP_UNARY:
- flags = 1;
- break;
-
- case SLANG_FUNCTION:
- flags = 2;
- break;
-
- default:
- flags = 0;
- break;
- }
-
- if ((flags & what)
- && (NULL != SLang_regexp_match ((unsigned char *)name, strlen (name), &rexp)))
- {
- if (at != NULL)
- {
- if (-1 == SLang_set_array_element (at, &num_matches, (VOID_STAR)&name))
- goto return_error;
- }
- num_matches++;
- }
- t = t->next;
- }
- }
-
- if (at == NULL)
- {
- at = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &num_matches, 1);
- if (at == NULL)
- goto return_error;
- }
- }
-
- return at;
-
- return_error:
- SLang_free_array (at);
- return NULL;
-}
-
-SLang_NameSpace_Type *SLns_create_namespace (char *namespace_name)
-{
- SLang_NameSpace_Type *ns;
- static int num;
- char name[64];
-
- if (namespace_name == NULL)
- namespace_name = "Global";
-
- ns = _SLns_find_namespace (namespace_name);
- if (ns != NULL)
- return ns;
-
- sprintf (name, " *** internal ns <%d> *** ", num);
-
- if (NULL == (ns = _SLns_allocate_namespace (name, SLSTATIC_HASH_TABLE_SIZE)))
- return NULL;
-
- num++;
- if (-1 == _SLns_set_namespace_name (ns, namespace_name))
- {
- SLns_delete_namespace (ns);
- return NULL;
- }
-
- return ns;
-}
-
-void SLns_delete_namespace (SLang_NameSpace_Type *ns)
-{
- (void) ns;
- /* V2.0 */
-}
diff --git a/mdk-stage1/slang/slospath.c b/mdk-stage1/slang/slospath.c
deleted file mode 100644
index 644931e81..000000000
--- a/mdk-stage1/slang/slospath.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Pathname intrinsic functions */
-/* Copyright (c) 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static void path_concat (char *a, char *b)
-{
- SLang_push_malloced_string (SLpath_dircat (a,b));
-}
-
-static void path_extname (char *path)
-{
-#ifdef VMS
- char *p;
-#endif
-
- path = SLpath_extname (path);
-#ifndef VMS
- SLang_push_string (path);
-#else
- p = strchr (path, ';');
- if (p == NULL)
- (void)SLang_push_string (p);
- else
- (void)SLang_push_malloced_string (SLmake_nstring (path, (unsigned int)(p - path)));
-#endif
-}
-
-static void path_basename (char *path)
-{
- (void) SLang_push_string (SLpath_basename (path));
-}
-
-static void path_dirname (char *path)
-{
- (void) SLang_push_malloced_string (SLpath_dirname (path));
-}
-
-static void path_sans_extname (char *path)
-{
- (void) SLang_push_malloced_string (SLpath_pathname_sans_extname (path));
-}
-
-
-
-static SLang_Intrin_Fun_Type Path_Name_Table [] =
-{
- MAKE_INTRINSIC_SS("path_concat", path_concat, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("path_extname", path_extname, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("path_dirname", path_dirname, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("path_basename", path_basename, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("path_sans_extname", path_sans_extname, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("path_is_absolute", SLpath_is_absolute_path, SLANG_INT_TYPE),
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_ospath (void)
-{
- if (-1 == SLadd_intrin_fun_table(Path_Name_Table, "__OSPATH__"))
- return -1;
-
- return 0;
-}
-
-
diff --git a/mdk-stage1/slang/slpack.c b/mdk-stage1/slang/slpack.c
deleted file mode 100644
index 53ef63643..000000000
--- a/mdk-stage1/slang/slpack.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/* Pack objects as a binary string */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <ctype.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifndef isdigit
-# define isdigit(c) (((c)>='0')&&((c)<= '9'))
-#endif
-#ifndef isspace
-# define isspace(c) (((c)==' ') || ((c)=='\t') || ((c)=='\n'))
-#endif
-
-/* format description:
- *
- * s = string (null padded)
- * S = string (space padded)
- * c = signed char
- * C = unsigned char
- * h = short
- * H = unsigned short
- * i = int
- * I = unsigned int
- * l = long
- * L = unsigned long
- * j = 16 bit signed integer (short)
- * J = 16 bit unsigned integer (short)
- * k = 32 bit signed integer (long)
- * K = 32 bit unsigned integer (long)
- * f = float (native format)
- * F = 32 bit double
- * d = double (native format)
- * D = 64 bit double
- * x = null pad byte
- * > = big-endian mode
- * < = little-endian mode
- * = = native mode
- */
-
-#define NATIVE_ORDER 0
-#define BIGENDIAN_ORDER 1
-#define LILENDIAN_ORDER 2
-static int Native_Byte_Order = NATIVE_ORDER;
-
-typedef struct
-{
- char format_type;
- unsigned char data_type;
- unsigned int repeat;
- unsigned int sizeof_type;
- char pad;
- int byteorder;
- int is_scalar;
-}
-Format_Type;
-
-static int get_int_type_for_size (unsigned int size, unsigned char *s, unsigned char *u)
-{
- if (sizeof (int) == size)
- {
- if (s != NULL) *s = SLANG_INT_TYPE;
- if (u != NULL) *u = SLANG_UINT_TYPE;
- return 0;
- }
-
- if (sizeof (short) == size)
- {
- if (s != NULL) *s = SLANG_SHORT_TYPE;
- if (u != NULL) *u = SLANG_USHORT_TYPE;
- return 1;
- }
-
- if (sizeof (long) == size)
- {
- if (s != NULL) *s = SLANG_LONG_TYPE;
- if (u != NULL) *u = SLANG_ULONG_TYPE;
- return 1;
- }
-
- if (s != NULL) *s = 0;
- if (u != NULL) *u = 0;
- SLang_verror (SL_NOT_IMPLEMENTED,
- "This OS does not support a %u byte int", size);
- return -1;
-}
-
-static int get_float_type_for_size (unsigned int size, unsigned char *s)
-{
- if (sizeof (float) == size)
- {
- *s = SLANG_FLOAT_TYPE;
- return 0;
- }
-
- if (sizeof (double) == size)
- {
- *s = SLANG_DOUBLE_TYPE;
- return 0;
- }
-
- SLang_verror (SL_NOT_IMPLEMENTED,
- "This OS does not support a %u byte float", size);
- return -1;
-}
-
-static int parse_a_format (char **format, Format_Type *ft)
-{
- char *f;
- char ch;
- unsigned repeat;
-
- f = *format;
-
- while (((ch = *f++) != 0)
- && isspace (ch))
- ;
-
- switch (ch)
- {
- default:
- ft->byteorder = NATIVE_ORDER;
- break;
-
- case '=':
- ft->byteorder = NATIVE_ORDER;
- ch = *f++;
- break;
-
- case '>':
- ft->byteorder = BIGENDIAN_ORDER;
- ch = *f++;
- break;
-
- case '<':
- ft->byteorder = LILENDIAN_ORDER;
- ch = *f++;
- break;
- }
-
- if (ch == 0)
- {
- f--;
- *format = f;
- return 0;
- }
-
- ft->format_type = ch;
- ft->repeat = 1;
-
- if (isdigit (*f))
- {
- repeat = (unsigned int) (*f - '0');
- f++;
-
- while (isdigit (*f))
- {
- unsigned int repeat10 = 10 * repeat + (unsigned int)(*f - '0');
-
- /* Check overflow */
- if (repeat != repeat10 / 10)
- {
- SLang_verror (SL_OVERFLOW,
- "Repeat count too large in [un]pack format");
- return -1;
- }
- repeat = repeat10;
- f++;
- }
- ft->repeat = repeat;
- }
-
- *format = f;
-
- ft->is_scalar = 1;
- ft->pad = 0;
-
- switch (ft->format_type)
- {
- default:
- SLang_verror (SL_NOT_IMPLEMENTED,
- "[un]pack format character '%c' not supported", ft->format_type);
- return -1;
-
- case 'D':
- ft->sizeof_type = 8;
- if (-1 == get_float_type_for_size (8, &ft->data_type))
- return -1;
- break;
-
- case 'd':
- ft->data_type = SLANG_DOUBLE_TYPE;
- ft->sizeof_type = sizeof (double);
- break;
-
- case 'F':
- ft->sizeof_type = 4;
- if (-1 == get_float_type_for_size (4, &ft->data_type))
- return -1;
- break;
- case 'f':
- ft->data_type = SLANG_FLOAT_TYPE;
- ft->sizeof_type = sizeof (float);
- break;
-
- case 'h':
- ft->data_type = SLANG_SHORT_TYPE;
- ft->sizeof_type = sizeof (short);
- break;
- case 'H':
- ft->data_type = SLANG_USHORT_TYPE;
- ft->sizeof_type = sizeof (unsigned short);
- break;
- case 'i':
- ft->data_type = SLANG_INT_TYPE;
- ft->sizeof_type = sizeof (int);
- break;
- case 'I':
- ft->data_type = SLANG_UINT_TYPE;
- ft->sizeof_type = sizeof (unsigned int);
- break;
- case 'l':
- ft->data_type = SLANG_LONG_TYPE;
- ft->sizeof_type = sizeof (long);
- break;
- case 'L':
- ft->data_type = SLANG_ULONG_TYPE;
- ft->sizeof_type = sizeof (unsigned long);
- break;
-
- /* 16 bit ints */
- case 'j':
- ft->sizeof_type = 2;
- if (-1 == get_int_type_for_size (2, &ft->data_type, NULL))
- return -1;
- break;
- case 'J':
- ft->sizeof_type = 2;
- if (-1 == get_int_type_for_size (2, NULL, &ft->data_type))
- return -1;
- break;
-
- /* 32 bit ints */
- case 'k':
- ft->sizeof_type = 4;
- if (-1 == get_int_type_for_size (4, &ft->data_type, NULL))
- return -1;
- break;
- case 'K':
- ft->sizeof_type = 4;
- if (-1 == get_int_type_for_size (4, NULL, &ft->data_type))
- return -1;
- break;
-
- case 'x':
- ft->sizeof_type = 1;
- ft->data_type = 0;
- break;
-
- case 'c':
- ft->sizeof_type = 1;
- ft->data_type = SLANG_CHAR_TYPE;
- break;
-
- case 'C':
- ft->data_type = SLANG_UCHAR_TYPE;
- ft->sizeof_type = 1;
- break;
-
- case 'S':
- case 'A':
- ft->pad = ' ';
- case 'a':
- case 's':
- ft->data_type = SLANG_BSTRING_TYPE;
- ft->sizeof_type = 1;
- ft->is_scalar = 0;
- break;
- }
- return 1;
-}
-
-static int compute_size_for_format (char *format, unsigned int *num_bytes)
-{
- unsigned int size;
- Format_Type ft;
- int status;
-
- *num_bytes = size = 0;
-
- while (1 == (status = parse_a_format (&format, &ft)))
- size += ft.repeat * ft.sizeof_type;
-
- *num_bytes = size;
- return status;
-}
-
-static void byte_swap64 (unsigned char *ss, unsigned int n) /*{{{*/
-{
- unsigned char *p, *pmax, ch;
-
- if (n == 0) return;
- p = (unsigned char *) ss;
- pmax = p + 8 * n;
- while (p < pmax)
- {
- ch = *p;
- *p = *(p + 7);
- *(p + 7) = ch;
-
- ch = *(p + 6);
- *(p + 6) = *(p + 1);
- *(p + 1) = ch;
-
- ch = *(p + 5);
- *(p + 5) = *(p + 2);
- *(p + 2) = ch;
-
- ch = *(p + 4);
- *(p + 4) = *(p + 3);
- *(p + 3) = ch;
-
- p += 8;
- }
-}
-
-/*}}}*/
-static void byte_swap32 (unsigned char *ss, unsigned int n) /*{{{*/
-{
- unsigned char *p, *pmax, ch;
-
- p = (unsigned char *) ss;
- pmax = p + 4 * n;
- while (p < pmax)
- {
- ch = *p;
- *p = *(p + 3);
- *(p + 3) = ch;
-
- ch = *(p + 1);
- *(p + 1) = *(p + 2);
- *(p + 2) = ch;
- p += 4;
- }
-}
-
-/*}}}*/
-static void byte_swap16 (unsigned char *p, unsigned int nread) /*{{{*/
-{
- unsigned char *pmax, ch;
-
- pmax = p + 2 * nread;
- while (p < pmax)
- {
- ch = *p;
- *p = *(p + 1);
- *(p + 1) = ch;
- p += 2;
- }
-}
-
-/*}}}*/
-
-static int byteswap (int order, unsigned char *b, unsigned int size, unsigned int num)
-{
- if (Native_Byte_Order == order)
- return 0;
-
- switch (size)
- {
- case 2:
- byte_swap16 (b, num);
- break;
- case 4:
- byte_swap32 (b, num);
- break;
- case 8:
- byte_swap64 (b, num);
- break;
- default:
- return -1;
- }
-
- return 0;
-}
-
-static void check_native_byte_order (void)
-{
- unsigned short x;
-
- if (Native_Byte_Order != NATIVE_ORDER)
- return;
-
- x = 0xFF;
- if (*(unsigned char *)&x == 0xFF)
- Native_Byte_Order = LILENDIAN_ORDER;
- else
- Native_Byte_Order = BIGENDIAN_ORDER;
-}
-
-static SLang_BString_Type *
-pack_according_to_format (char *format, unsigned int nitems)
-{
- unsigned int size, num;
- unsigned char *buf, *b;
- SLang_BString_Type *bs;
- Format_Type ft;
-
- buf = NULL;
-
- if (-1 == compute_size_for_format (format, &size))
- goto return_error;
-
- if (NULL == (buf = (unsigned char *) SLmalloc (size + 1)))
- goto return_error;
-
- b = buf;
-
- while (1 == parse_a_format (&format, &ft))
- {
- unsigned char *ptr;
- unsigned int repeat;
-
- repeat = ft.repeat;
- if (ft.data_type == 0)
- {
- memset ((char *) b, ft.pad, repeat);
- b += repeat;
- continue;
- }
-
- if (ft.is_scalar)
- {
- unsigned char *bstart;
- num = repeat;
-
- bstart = b;
- while (repeat != 0)
- {
- unsigned int nelements;
- SLang_Array_Type *at;
-
- if (nitems == 0)
- {
- SLang_verror (SL_INVALID_PARM,
- "Not enough items for pack format");
- goto return_error;
- }
-
- if (-1 == SLang_pop_array_of_type (&at, ft.data_type))
- goto return_error;
-
- nelements = at->num_elements;
- if (repeat < nelements)
- nelements = repeat;
- repeat -= nelements;
-
- nelements = nelements * ft.sizeof_type;
- memcpy ((char *)b, (char *)at->data, nelements);
-
- b += nelements;
- SLang_free_array (at);
- nitems--;
- }
-
- if (ft.byteorder != NATIVE_ORDER)
- byteswap (ft.byteorder, bstart, ft.sizeof_type, num);
-
- continue;
- }
-
- /* Otherwise we have a string */
- if (-1 == SLang_pop_bstring (&bs))
- goto return_error;
-
- ptr = SLbstring_get_pointer (bs, &num);
- if (repeat < num) num = repeat;
- memcpy ((char *)b, (char *)ptr, num);
- b += num;
- repeat -= num;
- memset ((char *)b, ft.pad, repeat);
- SLbstring_free (bs);
- b += repeat;
- nitems--;
- }
-
- *b = 0;
- bs = SLbstring_create_malloced (buf, size, 0);
- if (bs == NULL)
- goto return_error;
-
- SLdo_pop_n (nitems);
- return bs;
-
- return_error:
- SLdo_pop_n (nitems);
- if (buf != NULL)
- SLfree ((char *) buf);
-
- return NULL;
-}
-
-void _SLpack (void)
-{
- SLang_BString_Type *bs;
- char *fmt;
- int nitems;
-
- check_native_byte_order ();
-
- nitems = SLang_Num_Function_Args;
- if (nitems <= 0)
- {
- SLang_verror (SL_SYNTAX_ERROR,
- "pack: not enough arguments");
- return;
- }
-
- if ((-1 == SLreverse_stack (nitems))
- || (-1 == SLang_pop_slstring (&fmt)))
- bs = NULL;
- else
- {
- bs = pack_according_to_format (fmt, (unsigned int)nitems - 1);
- SLang_free_slstring (fmt);
- }
-
- SLang_push_bstring (bs);
- SLbstring_free (bs);
-}
-
-void _SLunpack (char *format, SLang_BString_Type *bs)
-{
- Format_Type ft;
- unsigned char *b;
- unsigned int len;
- unsigned int num_bytes;
-
- check_native_byte_order ();
-
- if (-1 == compute_size_for_format (format, &num_bytes))
- return;
-
- b = SLbstring_get_pointer (bs, &len);
- if (b == NULL)
- return;
-
- if (len < num_bytes)
- {
- SLang_verror (SL_INVALID_PARM,
- "unpack format %s is too large for input string",
- format);
- return;
- }
-
- while (1 == parse_a_format (&format, &ft))
- {
- char *str, *s;
-
- if (ft.repeat == 0)
- continue;
-
- if (ft.data_type == 0)
- { /* skip padding */
- b += ft.repeat;
- continue;
- }
-
- if (ft.is_scalar)
- {
- SLang_Array_Type *at;
- int dims;
-
- if (ft.repeat == 1)
- {
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (ft.data_type);
- memcpy ((char *)cl->cl_transfer_buf, (char *)b, ft.sizeof_type);
- if (ft.byteorder != NATIVE_ORDER)
- byteswap (ft.byteorder, (unsigned char *)cl->cl_transfer_buf, ft.sizeof_type, 1);
-
- if (-1 == (cl->cl_apush (ft.data_type, cl->cl_transfer_buf)))
- return;
- b += ft.sizeof_type;
- continue;
- }
-
- dims = (int) ft.repeat;
- at = SLang_create_array (ft.data_type, 0, NULL, &dims, 1);
- if (at == NULL)
- return;
-
- num_bytes = ft.repeat * ft.sizeof_type;
- memcpy ((char *)at->data, (char *)b, num_bytes);
- if (ft.byteorder != NATIVE_ORDER)
- byteswap (ft.byteorder, (unsigned char *)at->data, ft.sizeof_type, ft.repeat);
-
- if (-1 == SLang_push_array (at, 1))
- return;
-
- b += num_bytes;
- continue;
- }
-
- len = ft.repeat;
- str = SLmalloc (len + 1);
- if (str == NULL)
- return;
-
- memcpy ((char *) str, (char *)b, len);
- str [len] = 0;
-
- if (ft.pad == ' ')
- {
- unsigned int new_len;
-
- s = str + len;
- while (s > str)
- {
- s--;
- if ((*s != ' ') && (*s != 0))
- {
- s++;
- break;
- }
- *s = 0;
- }
- new_len = (unsigned int) (s - str);
-
- if (new_len != len)
- {
- s = SLrealloc (str, new_len + 1);
- if (s == NULL)
- {
- SLfree (str);
- return;
- }
- str = s;
- len = new_len;
- }
- }
-
- /* Avoid a bstring if possible */
- s = SLmemchr (str, 0, len);
- if (s == NULL)
- {
- if (-1 == SLang_push_malloced_string (str))
- return;
- }
- else
- {
- SLang_BString_Type *new_bs;
-
- new_bs = SLbstring_create_malloced ((unsigned char *)str, len, 1);
- if (new_bs == NULL)
- return;
-
- if (-1 == SLang_push_bstring (new_bs))
- {
- SLfree (str);
- return;
- }
- SLbstring_free (new_bs);
- }
-
- b += ft.repeat;
- }
-}
-
-unsigned int _SLpack_compute_size (char *format)
-{
- unsigned int n;
-
- n = 0;
- (void) compute_size_for_format (format, &n);
- return n;
-}
-
-void _SLpack_pad_format (char *format)
-{
- unsigned int len, max_len;
- Format_Type ft;
- char *buf, *b;
-
- check_native_byte_order ();
-
- /* Just check the syntax */
- if (-1 == compute_size_for_format (format, &max_len))
- return;
-
- /* This should be sufficient to handle any needed xyy padding characters.
- * I cannot see how this will be overrun
- */
- max_len = 4 * (strlen (format) + 1);
- if (NULL == (buf = SLmalloc (max_len + 1)))
- return;
-
- b = buf;
- len = 0;
- while (1 == parse_a_format (&format, &ft))
- {
- struct { char a; short b; } s_h;
- struct { char a; int b; } s_i;
- struct { char a; long b; } s_l;
- struct { char a; float b; } s_f;
- struct { char a; double b; } s_d;
- unsigned int pad;
-
- if (ft.repeat == 0)
- continue;
-
- if (ft.data_type == 0)
- { /* pad */
- sprintf (b, "x%u", ft.repeat);
- b += strlen (b);
- len += ft.repeat;
- continue;
- }
-
- switch (ft.data_type)
- {
- default:
- case SLANG_STRING_TYPE:
- case SLANG_BSTRING_TYPE:
- case SLANG_CHAR_TYPE:
- case SLANG_UCHAR_TYPE:
- pad = 0;
- break;
-
- case SLANG_SHORT_TYPE:
- case SLANG_USHORT_TYPE:
- pad = ((unsigned int) ((char *)&s_h.b - (char *)&s_h.a));
- break;
-
- case SLANG_INT_TYPE:
- case SLANG_UINT_TYPE:
- pad = ((unsigned int) ((char *)&s_i.b - (char *)&s_i.a));
- break;
-
- case SLANG_LONG_TYPE:
- case SLANG_ULONG_TYPE:
- pad = ((unsigned int) ((char *)&s_l.b - (char *)&s_l.a));
- break;
-
- case SLANG_FLOAT_TYPE:
- pad = ((unsigned int) ((char *)&s_f.b - (char *)&s_f.a));
- break;
-
- case SLANG_DOUBLE_TYPE:
- pad = ((unsigned int) ((char *)&s_d.b - (char *)&s_d.a));
- break;
- }
-
- /* Pad to a length that is an integer multiple of pad. */
- if (pad)
- pad = pad * ((len + pad - 1)/pad) - len;
-
- if (pad)
- {
- sprintf (b, "x%u", pad);
- b += strlen (b);
- len += pad;
- }
-
- *b++ = ft.format_type;
- if (ft.repeat > 1)
- {
- sprintf (b, "%u", ft.repeat);
- b += strlen (b);
- }
-
- len += ft.repeat * ft.sizeof_type;
- }
- *b = 0;
-
- (void) SLang_push_malloced_string (buf);
-}
diff --git a/mdk-stage1/slang/slparse.c b/mdk-stage1/slang/slparse.c
deleted file mode 100644
index bc709d1fb..000000000
--- a/mdk-stage1/slang/slparse.c
+++ /dev/null
@@ -1,1970 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static SLang_Load_Type *LLT;
-int _SLang_Compile_Line_Num_Info;
-
-static void free_token (_SLang_Token_Type *t)
-{
- register unsigned int nrefs = t->num_refs;
-
- if (nrefs == 0)
- return;
-
- if (nrefs == 1)
- {
- if (t->free_sval_flag)
- {
- if (t->type == BSTRING_TOKEN)
- SLbstring_free (t->v.b_val);
- else
- _SLfree_hashed_string (t->v.s_val, strlen (t->v.s_val), t->hash);
- t->v.s_val = NULL;
- }
- }
-
- t->num_refs = nrefs - 1;
-}
-
-static void init_token (_SLang_Token_Type *t)
-{
- memset ((char *) t, 0, sizeof (_SLang_Token_Type));
-#if _SLANG_HAS_DEBUG_CODE
- t->line_number = -1;
-#endif
-}
-
-/* Allow room for one push back of a token. This is necessary for
- * multiple assignment.
- */
-static unsigned int Use_Next_Token;
-static _SLang_Token_Type Next_Token;
-#if _SLANG_HAS_DEBUG_CODE
-static int Last_Line_Number = -1;
-#endif
-
-static int unget_token (_SLang_Token_Type *ctok)
-{
- if (SLang_Error)
- return -1;
- if (Use_Next_Token != 0)
- {
- _SLparse_error ("unget_token failed", ctok, 0);
- return -1;
- }
-
- Use_Next_Token++;
- Next_Token = *ctok;
- init_token (ctok);
- return 0;
-}
-
-static int get_token (_SLang_Token_Type *ctok)
-{
- if (ctok->num_refs)
- free_token (ctok);
-
- if (Use_Next_Token)
- {
- Use_Next_Token--;
- *ctok = Next_Token;
- return ctok->type;
- }
-
- return _SLget_token (ctok);
-}
-
-static int compile_token (_SLang_Token_Type *t)
-{
-#if _SLANG_HAS_DEBUG_CODE
- if (_SLang_Compile_Line_Num_Info
- && (t->line_number != Last_Line_Number)
- && (t->line_number != -1))
- {
- _SLang_Token_Type tok;
- tok.type = LINE_NUM_TOKEN;
- tok.v.long_val = Last_Line_Number = t->line_number;
- (*_SLcompile_ptr) (&tok);
- }
-#endif
- (*_SLcompile_ptr) (t);
- return 0;
-}
-
-typedef struct
-{
-#define USE_PARANOID_MAGIC 0
-#if USE_PARANOID_MAGIC
- unsigned long magic;
-#endif
- _SLang_Token_Type *stack;
- unsigned int len;
- unsigned int size;
-}
-Token_List_Type;
-
-#define MAX_TOKEN_LISTS 16
-static Token_List_Type Token_List_Stack [MAX_TOKEN_LISTS];
-static unsigned int Token_List_Stack_Depth = 0;
-static Token_List_Type *Token_List = NULL;
-
-static void init_token_list (Token_List_Type *t)
-{
- t->size = 0;
- t->len = 0;
- t->stack = NULL;
-#if USE_PARANOID_MAGIC
- t->magic = 0xABCDEF12;
-#endif
-}
-
-static void free_token_list (Token_List_Type *t)
-{
- _SLang_Token_Type *s;
-
- if (t == NULL)
- return;
-#if USE_PARANOID_MAGIC
- if (t->magic != 0xABCDEF12)
- {
- SLang_doerror ("Magic error.");
- return;
- }
-#endif
- s = t->stack;
- if (s != NULL)
- {
- _SLang_Token_Type *smax = s + t->len;
- while (s != smax)
- {
- if (s->num_refs) free_token (s);
- s++;
- }
-
- SLfree ((char *) t->stack);
- }
-
- memset ((char *) t, 0, sizeof (Token_List_Type));
-}
-
-static Token_List_Type *push_token_list (void)
-{
- if (Token_List_Stack_Depth == MAX_TOKEN_LISTS)
- {
- _SLparse_error ("Token list stack size exceeded", NULL, 0);
- return NULL;
- }
-
- Token_List = Token_List_Stack + Token_List_Stack_Depth;
- Token_List_Stack_Depth++;
- init_token_list (Token_List);
- return Token_List;
-}
-
-static int pop_token_list (int do_free)
-{
- if (Token_List_Stack_Depth == 0)
- {
- if (SLang_Error == 0)
- _SLparse_error ("Token list stack underflow", NULL, 0);
- return -1;
- }
- Token_List_Stack_Depth--;
-
- if (do_free) free_token_list (Token_List);
-
- if (Token_List_Stack_Depth != 0)
- Token_List = Token_List_Stack + (Token_List_Stack_Depth - 1);
- else
- Token_List = NULL;
-
- return 0;
-}
-
-static int check_token_list_space (Token_List_Type *t, unsigned int delta_size)
-{
- _SLang_Token_Type *st;
- unsigned int len;
-#if USE_PARANOID_MAGIC
- if (t->magic != 0xABCDEF12)
- {
- SLang_doerror ("Magic error.");
- return -1;
- }
-#endif
- len = t->len + delta_size;
- if (len <= t->size) return 0;
-
- if (delta_size < 4)
- {
- delta_size = 4;
- len = t->len + delta_size;
- }
-
- st = (_SLang_Token_Type *) SLrealloc((char *) t->stack,
- len * sizeof(_SLang_Token_Type));
- if (st == NULL)
- {
- _SLparse_error ("Malloc error", NULL, 0);
- return -1;
- }
-
- memset ((char *) (st + t->len), 0, delta_size);
-
- t->stack = st;
- t->size = len;
- return 0;
-}
-
-static int append_token (_SLang_Token_Type *t)
-{
- if (-1 == check_token_list_space (Token_List, 1))
- return -1;
-
- Token_List->stack [Token_List->len] = *t;
- Token_List->len += 1;
- t->num_refs = 0; /* stealing it */
- return 0;
-}
-
-static int append_token_of_type (unsigned char t)
-{
- _SLang_Token_Type *tok;
-
- if (-1 == check_token_list_space (Token_List, 1))
- return -1;
-
- /* The memset when the list was created ensures that the other fields
- * are properly initialized.
- */
- tok = Token_List->stack + Token_List->len;
- init_token (tok);
- tok->type = t;
- Token_List->len += 1;
- return 0;
-}
-
-static _SLang_Token_Type *get_last_token (void)
-{
- unsigned int len;
-
- if ((Token_List == NULL)
- || (0 == (len = Token_List->len)))
- return NULL;
-
- len--;
- return Token_List->stack + len;
-}
-
-/* This function does NOT free the list. */
-static int compile_token_list_with_fun (int dir, Token_List_Type *list,
- int (*f)(_SLang_Token_Type *))
-{
- _SLang_Token_Type *t0, *t1;
-
- if (list == NULL)
- return -1;
-
- if (f == NULL)
- f = compile_token;
-
- t0 = list->stack;
- t1 = t0 + list->len;
-
- if (dir < 0)
- {
- /* backwards */
-
- while ((SLang_Error == 0) && (t1 > t0))
- {
- t1--;
- (*f) (t1);
- }
- return 0;
- }
-
- /* forward */
- while ((SLang_Error == 0) && (t0 < t1))
- {
- (*f) (t0);
- t0++;
- }
- return 0;
-}
-
-static int compile_token_list (void)
-{
- if (Token_List == NULL)
- return -1;
-
- compile_token_list_with_fun (1, Token_List, NULL);
- pop_token_list (1);
- return 0;
-}
-
-/* Take all elements in the list from pos2 to the end and exchange them
- * with the elements at pos1, e.g.,
- * ...ABCDEabc ==> ...abcABCDE
- * where pos1 denotes A and pos2 denotes a.
- */
-static int token_list_element_exchange (unsigned int pos1, unsigned int pos2)
-{
- _SLang_Token_Type *s, *s1, *s2;
- unsigned int len, nloops;
-
- if (Token_List == NULL)
- return -1;
-
- s = Token_List->stack;
- len = Token_List->len;
-
- if ((s == NULL) || (len == 0)
- || (pos2 >= len))
- return -1;
-
- /* This may not be the most efficient algorithm but the number to swap
- * is most-likely going to be small, e.g, 3
- * The algorithm is to rotate the list. The particular rotation
- * direction was chosen to make insert_token fast.
- * It works like:
- * @ ABCabcde --> BCabcdeA --> CabcdeAB --> abcdefAB
- * which is optimal for Abcdef sequence produced by function calls.
- *
- * Profiling indicates that nloops is almost always 1, whereas the inner
- * loop can loop many times (e.g., 9 times).
- */
-
- s2 = s + (len - 1);
- s1 = s + pos1;
- nloops = pos2 - pos1;
-
- while (nloops)
- {
- _SLang_Token_Type save;
-
- s = s1;
- save = *s;
-
- while (s < s2)
- {
- *s = *(s + 1);
- s++;
- }
- *s = save;
-
- nloops--;
- }
- return 0;
-}
-
-#if 0
-static int insert_token (_SLang_Token_Type *t, unsigned int pos)
-{
- if (-1 == append_token (t))
- return -1;
-
- return token_list_element_exchange (pos, Token_List->len - 1);
-}
-#endif
-static void compile_token_of_type (unsigned char t)
-{
- _SLang_Token_Type tok;
-
-#if _SLANG_HAS_DEBUG_CODE
- tok.line_number = -1;
-#endif
- tok.type = t;
- compile_token(&tok);
-}
-
-static void statement (_SLang_Token_Type *);
-static void compound_statement (_SLang_Token_Type *);
-static void expression_with_parenthesis (_SLang_Token_Type *);
-static void handle_semicolon (_SLang_Token_Type *);
-static void statement_list (_SLang_Token_Type *);
-static void variable_list (_SLang_Token_Type *, unsigned char);
-static void struct_declaration (_SLang_Token_Type *);
-static void define_function_args (_SLang_Token_Type *);
-static void typedef_definition (_SLang_Token_Type *);
-static void function_args_expression (_SLang_Token_Type *, int);
-static void expression (_SLang_Token_Type *);
-static void expression_with_commas (_SLang_Token_Type *, int);
-static void simple_expression (_SLang_Token_Type *);
-static void unary_expression (_SLang_Token_Type *);
-static void postfix_expression (_SLang_Token_Type *);
-static int check_for_lvalue (unsigned char, _SLang_Token_Type *);
-/* static void primary_expression (_SLang_Token_Type *); */
-static void block (_SLang_Token_Type *);
-static void inline_array_expression (_SLang_Token_Type *);
-static void array_index_expression (_SLang_Token_Type *);
-static void do_multiple_assignment (_SLang_Token_Type *);
-static void try_multiple_assignment (_SLang_Token_Type *);
-#if 0
-static void not_implemented (char *what)
-{
- char err [256];
- sprintf (err, "Expression not implemented: %s", what);
- _SLparse_error (err, NULL, 0);
-}
-#endif
-static void rpn_parse_line (_SLang_Token_Type *tok)
-{
- do
- {
- /* multiple RPN tokens possible when the file looks like:
- * . <end of line>
- * . <end of line>
- */
- if (tok->type != RPN_TOKEN)
- compile_token (tok);
- free_token (tok);
- }
- while (EOF_TOKEN != _SLget_rpn_token (tok));
-}
-
-static int get_identifier_token (_SLang_Token_Type *tok)
-{
- if (IDENT_TOKEN == get_token (tok))
- return IDENT_TOKEN;
-
- _SLparse_error ("Expecting identifier", tok, 0);
- return tok->type;
-}
-
-static void define_function (_SLang_Token_Type *ctok, unsigned char type)
-{
- _SLang_Token_Type fname;
-
- switch (type)
- {
- case STATIC_TOKEN:
- type = DEFINE_STATIC_TOKEN;
- break;
-
- case PUBLIC_TOKEN:
- type = DEFINE_PUBLIC_TOKEN;
- break;
-
- case PRIVATE_TOKEN:
- type = DEFINE_PRIVATE_TOKEN;
- }
-
- init_token (&fname);
- if (IDENT_TOKEN != get_identifier_token (&fname))
- {
- free_token (&fname);
- return;
- }
-
- compile_token_of_type(OPAREN_TOKEN);
- get_token (ctok);
- define_function_args (ctok);
- compile_token_of_type(FARG_TOKEN);
-
- if (ctok->type == OBRACE_TOKEN)
- compound_statement(ctok);
-
- else if (ctok->type != SEMICOLON_TOKEN)
- {
- _SLparse_error("Expecting {", ctok, 0);
- free_token (&fname);
- return;
- }
-
- fname.type = type;
- compile_token (&fname);
- free_token (&fname);
-}
-
-/* statement:
- * compound-statement
- * if ( expression ) statement
- * if ( expression ) statement else statement
- * !if ( expression ) statement
- * loop ( expression ) statement
- * _for ( expression ) statement
- * foreach ( expression ) statement
- * foreach (expression ) using (expression-list) statement
- * while ( expression ) statement
- * do statement while (expression) ;
- * for ( expressionopt ; expressionopt ; expressionopt ) statement
- * ERROR_BLOCK statement
- * EXIT_BLOCK statement
- * USER_BLOCK0 statement
- * USER_BLOCK1 statement
- * USER_BLOCK2 statement
- * USER_BLOCK3 statement
- * USER_BLOCK4 statement
- * forever statement
- * break ;
- * continue ;
- * return expressionopt ;
- * variable variable-list ;
- * struct struct-decl ;
- * define identifier function-args ;
- * define identifier function-args compound-statement
- * switch ( expression ) statement
- * rpn-line
- * at-line
- * push ( expression )
- * ( expression ) = expression ;
- * expression ;
- * expression :
- */
-
-/* Note: This function does not return with a new token. It is up to the
- * calling routine to handle that.
- */
-static void statement (_SLang_Token_Type *ctok)
-{
- unsigned char type;
-
- if (SLang_Error)
- return;
-
- LLT->parse_level += 1;
-
- switch (ctok->type)
- {
- case OBRACE_TOKEN:
- compound_statement (ctok);
- break;
-
- case IF_TOKEN:
- case IFNOT_TOKEN:
- type = ctok->type;
- get_token (ctok);
- expression_with_parenthesis (ctok);
- block (ctok);
-
- if (ELSE_TOKEN != get_token (ctok))
- {
- compile_token_of_type (type);
- unget_token (ctok);
- break;
- }
- get_token (ctok);
- block (ctok);
- if (type == IF_TOKEN) type = ELSE_TOKEN; else type = NOTELSE_TOKEN;
- compile_token_of_type (type);
- break;
-
- /* case IFNOT_TOKEN: */
- case LOOP_TOKEN:
- case _FOR_TOKEN:
- type = ctok->type;
- get_token (ctok);
- expression_with_parenthesis (ctok);
- block (ctok);
- compile_token_of_type (type);
- break;
-
- case FOREACH_TOKEN:
- get_token (ctok);
- expression_with_parenthesis (ctok);
-
- if (NULL == push_token_list ())
- break;
-
- append_token_of_type (ARG_TOKEN);
- if (ctok->type == USING_TOKEN)
- {
- if (OPAREN_TOKEN != get_token (ctok))
- {
- _SLparse_error ("Expected 'using ('", ctok, 0);
- break;
- }
- get_token (ctok);
- function_args_expression (ctok, 0);
- }
- append_token_of_type (EARG_TOKEN);
-
- compile_token_list ();
-
- block (ctok);
- compile_token_of_type (FOREACH_TOKEN);
- break;
-
- case WHILE_TOKEN:
- get_token (ctok);
- compile_token_of_type (OBRACE_TOKEN);
- expression_with_parenthesis (ctok);
- compile_token_of_type (CBRACE_TOKEN);
- block (ctok);
- compile_token_of_type (WHILE_TOKEN);
- break;
-
- case DO_TOKEN:
- get_token (ctok);
- block (ctok);
-
- if (WHILE_TOKEN != get_token (ctok))
- {
- _SLparse_error("Expecting while", ctok, 0);
- break;
- }
-
- get_token (ctok);
-
- compile_token_of_type (OBRACE_TOKEN);
- expression_with_parenthesis (ctok);
- compile_token_of_type (CBRACE_TOKEN);
- compile_token_of_type (DOWHILE_TOKEN);
- handle_semicolon (ctok);
- break;
-
- case FOR_TOKEN:
-
- /* Look for (exp_opt ; exp_opt ; exp_opt ) */
-
- if (OPAREN_TOKEN != get_token (ctok))
- {
- _SLparse_error("Expecting (.", ctok, 0);
- break;
- }
-
- if (NULL == push_token_list ())
- break;
-
- append_token_of_type (OBRACE_TOKEN);
- if (SEMICOLON_TOKEN != get_token (ctok))
- {
- expression (ctok);
- if (ctok->type != SEMICOLON_TOKEN)
- {
- _SLparse_error("Expecting ;", ctok, 0);
- break;
- }
- }
- append_token_of_type (CBRACE_TOKEN);
-
- append_token_of_type (OBRACE_TOKEN);
- if (SEMICOLON_TOKEN != get_token (ctok))
- {
- expression (ctok);
- if (ctok->type != SEMICOLON_TOKEN)
- {
- _SLparse_error("Expecting ;", ctok, 0);
- break;
- }
- }
- append_token_of_type (CBRACE_TOKEN);
-
- append_token_of_type (OBRACE_TOKEN);
- if (CPAREN_TOKEN != get_token (ctok))
- {
- expression (ctok);
- if (ctok->type != CPAREN_TOKEN)
- {
- _SLparse_error("Expecting ).", ctok, 0);
- break;
- }
- }
- append_token_of_type (CBRACE_TOKEN);
-
- compile_token_list ();
-
- get_token (ctok);
- block (ctok);
- compile_token_of_type (FOR_TOKEN);
- break;
-
- case ERRBLK_TOKEN:
- case EXITBLK_TOKEN:
- case USRBLK0_TOKEN:
- case USRBLK1_TOKEN:
- case USRBLK2_TOKEN:
- case USRBLK3_TOKEN:
- case USRBLK4_TOKEN:
- case FOREVER_TOKEN:
- type = ctok->type;
- get_token (ctok);
- block (ctok);
- compile_token_of_type (type);
- break;
-
- case BREAK_TOKEN:
- case CONT_TOKEN:
- compile_token_of_type (ctok->type);
- get_token (ctok);
- handle_semicolon (ctok);
- break;
-
- case RETURN_TOKEN:
- if (SEMICOLON_TOKEN != get_token (ctok))
- {
- if (NULL == push_token_list ())
- break;
-
- expression (ctok);
-
- if (ctok->type != SEMICOLON_TOKEN)
- {
- _SLparse_error ("Expecting ;", ctok, 0);
- break;
- }
- compile_token_list ();
- }
- compile_token_of_type (RETURN_TOKEN);
- handle_semicolon (ctok);
- break;
-
- case STATIC_TOKEN:
- case PRIVATE_TOKEN:
- case PUBLIC_TOKEN:
- type = ctok->type;
- get_token (ctok);
- if (ctok->type == VARIABLE_TOKEN)
- {
- get_token (ctok);
- variable_list (ctok, type);
- handle_semicolon (ctok);
- break;
- }
- if (ctok->type == DEFINE_TOKEN)
- {
- define_function (ctok, type);
- break;
- }
- _SLparse_error ("Expecting 'variable' or 'define'", ctok, 0);
- break;
-
- case VARIABLE_TOKEN:
- get_token (ctok);
- variable_list (ctok, OBRACKET_TOKEN);
- handle_semicolon (ctok);
- break;
-
- case TYPEDEF_TOKEN:
- get_token (ctok);
- if (NULL == push_token_list ())
- break;
- typedef_definition (ctok);
- compile_token_list ();
-
- handle_semicolon (ctok);
- break;
-
- case DEFINE_TOKEN:
- define_function (ctok, DEFINE_TOKEN);
- break;
-
- case SWITCH_TOKEN:
- get_token (ctok);
- expression_with_parenthesis (ctok);
-
- while ((SLang_Error == 0)
- && (OBRACE_TOKEN == ctok->type))
- {
- compile_token_of_type (OBRACE_TOKEN);
- compound_statement (ctok);
- compile_token_of_type (CBRACE_TOKEN);
- get_token (ctok);
- }
- compile_token_of_type (SWITCH_TOKEN);
- unget_token (ctok);
- break;
-
- case EOF_TOKEN:
- break;
-#if 0
- case PUSH_TOKEN:
- get_token (ctok);
- expression_list_with_parenthesis (ctok);
- handle_semicolon (ctok);
- break;
-#endif
-
- case SEMICOLON_TOKEN:
- handle_semicolon (ctok);
- break;
-
- case RPN_TOKEN:
- if (POUND_TOKEN == get_token (ctok))
- _SLcompile_byte_compiled ();
- else if (ctok->type != EOF_TOKEN)
- rpn_parse_line (ctok);
- break;
-
- case OPAREN_TOKEN: /* multiple assignment */
- try_multiple_assignment (ctok);
- if (ctok->type == COLON_TOKEN)
- compile_token_of_type (COLON_TOKEN);
- else handle_semicolon (ctok);
- break;
-
- default:
-
- if (NULL == push_token_list ())
- break;
-
- expression (ctok);
- compile_token_list ();
-
- if (ctok->type == COLON_TOKEN)
- compile_token_of_type (COLON_TOKEN);
- else handle_semicolon (ctok);
- break;
- }
-
- LLT->parse_level -= 1;
-}
-
-static void block (_SLang_Token_Type *ctok)
-{
- compile_token_of_type (OBRACE_TOKEN);
- statement (ctok);
- compile_token_of_type (CBRACE_TOKEN);
-}
-
-/*
- * statement-list:
- * statement
- * statement-list statement
- */
-static void statement_list (_SLang_Token_Type *ctok)
-{
- while ((SLang_Error == 0)
- && (ctok->type != CBRACE_TOKEN)
- && (ctok->type != EOF_TOKEN))
- {
- statement(ctok);
- get_token (ctok);
- }
-}
-
-/* compound-statement:
- * { statement-list }
- */
-static void compound_statement (_SLang_Token_Type *ctok)
-{
- /* ctok->type is OBRACE_TOKEN here */
- get_token (ctok);
- statement_list(ctok);
- if (CBRACE_TOKEN != ctok->type)
- {
- _SLparse_error ("Expecting '}'", ctok, 0);
- return;
- }
-}
-
-/* This function is only called from statement. */
-static void expression_with_parenthesis (_SLang_Token_Type *ctok)
-{
- if (ctok->type != OPAREN_TOKEN)
- {
- _SLparse_error("Expecting (", ctok, 0);
- return;
- }
-
- if (NULL == push_token_list ())
- return;
-
- get_token (ctok);
- expression (ctok);
-
- if (ctok->type != CPAREN_TOKEN)
- _SLparse_error("Expecting )", ctok, 0);
-
- compile_token_list ();
-
- get_token (ctok);
-}
-
-static void handle_semicolon (_SLang_Token_Type *ctok)
-{
- if ((ctok->type == SEMICOLON_TOKEN)
- || (ctok->type == EOF_TOKEN))
- return;
-
- _SLparse_error ("Expecting ;", ctok, 0);
-}
-
-void _SLparse_start (SLang_Load_Type *llt)
-{
- _SLang_Token_Type ctok;
- SLang_Load_Type *save_llt;
- unsigned int save_use_next_token;
- _SLang_Token_Type save_next_token;
- Token_List_Type *save_list;
-#if _SLANG_HAS_DEBUG_CODE
- int save_last_line_number = Last_Line_Number;
-
- Last_Line_Number = -1;
-#endif
- save_use_next_token = Use_Next_Token;
- save_next_token = Next_Token;
- save_list = Token_List;
- save_llt = LLT;
- LLT = llt;
-
- init_token (&Next_Token);
- Use_Next_Token = 0;
- init_token (&ctok);
- get_token (&ctok);
-
- llt->parse_level = 0;
- statement_list (&ctok);
-
- if ((SLang_Error == 0)
- && (ctok.type != EOF_TOKEN))
- _SLparse_error ("Parse ended prematurely", &ctok, 0);
-
-
- if (SLang_Error)
- {
- if (SLang_Error < 0) /* severe error */
- save_list = NULL;
-
- while (Token_List != save_list)
- {
- if (-1 == pop_token_list (1))
- break; /* ??? when would this happen? */
- }
- }
-
- free_token (&ctok);
- LLT = save_llt;
- if (Use_Next_Token)
- free_token (&Next_Token);
- Use_Next_Token = save_use_next_token;
- Next_Token = save_next_token;
-#if _SLANG_HAS_DEBUG_CODE
- Last_Line_Number = save_last_line_number;
-#endif
-}
-
-/* variable-list:
- * variable-decl
- * variable-decl variable-list
- *
- * variable-decl:
- * identifier
- * identifier = simple-expression
- */
-static void variable_list (_SLang_Token_Type *name_token, unsigned char variable_type)
-{
- int declaring;
- _SLang_Token_Type tok;
-
- if (name_token->type != IDENT_TOKEN)
- {
- _SLparse_error ("Expecting a variable name", name_token, 0);
- return;
- }
-
- declaring = 0;
- do
- {
- if (declaring == 0)
- {
- declaring = 1;
- compile_token_of_type (variable_type);
- }
-
- compile_token (name_token);
-
- init_token (&tok);
- if (ASSIGN_TOKEN == get_token (&tok))
- {
- compile_token_of_type (CBRACKET_TOKEN);
- declaring = 0;
-
- get_token (&tok);
-
- push_token_list ();
- simple_expression (&tok);
- compile_token_list ();
-
- name_token->type = _SCALAR_ASSIGN_TOKEN;
- compile_token (name_token);
- }
-
- free_token (name_token);
- *name_token = tok;
- }
- while ((name_token->type == COMMA_TOKEN)
- && (IDENT_TOKEN == get_token (name_token)));
-
- if (declaring) compile_token_of_type (CBRACKET_TOKEN);
-}
-
-/* struct-declaration:
- * struct { struct-field-list };
- *
- * struct-field-list:
- * struct-field-name , struct-field-list
- * struct-field-name
- *
- * Generates code: "field-name-1" ... "field-name-N" N STRUCT_TOKEN
- */
-static void struct_declaration (_SLang_Token_Type *ctok)
-{
- int n;
- _SLang_Token_Type num_tok;
-
- if (ctok->type != OBRACE_TOKEN)
- {
- _SLparse_error ("Expecting {", ctok, 0);
- return;
- }
-
- n = 0;
- while (IDENT_TOKEN == get_token (ctok))
- {
- n++;
- ctok->type = STRING_TOKEN;
- append_token (ctok);
- if (COMMA_TOKEN != get_token (ctok))
- break;
- }
-
- if (ctok->type != CBRACE_TOKEN)
- {
- _SLparse_error ("Expecting }", ctok, 0);
- return;
- }
- if (n == 0)
- {
- _SLparse_error ("struct requires at least 1 field", ctok, 0);
- return;
- }
-
- init_token (&num_tok);
- num_tok.type = INT_TOKEN;
- num_tok.v.long_val = n;
- append_token (&num_tok);
- append_token_of_type (STRUCT_TOKEN);
-
- get_token (ctok);
-}
-
-/* struct-declaration:
- * typedef struct { struct-field-list } Type_Name;
- *
- * struct-field-list:
- * struct-field-name , struct-field-list
- * struct-field-name
- *
- * Generates code: "field-name-1" ... "field-name-N" N STRUCT_TOKEN typedef
- */
-static void typedef_definition (_SLang_Token_Type *t)
-{
-
- if (t->type != STRUCT_TOKEN)
- {
- _SLparse_error ("Expecting `struct'", t, 0);
- return;
- }
- get_token (t);
-
- struct_declaration (t);
- if (t->type != IDENT_TOKEN)
- {
- _SLparse_error ("Expecting identifier", t, 0);
- return;
- }
-
- t->type = STRING_TOKEN;
- append_token (t);
- append_token_of_type (TYPEDEF_TOKEN);
-
- get_token (t);
-}
-
-/* function-args:
- * ( args-dec-opt )
- *
- * args-decl-opt:
- * identifier
- * args-decl , identifier
- */
-static void define_function_args (_SLang_Token_Type *ctok)
-{
- if (CPAREN_TOKEN == get_token (ctok))
- {
- get_token (ctok);
- return;
- }
-
- compile_token_of_type(OBRACKET_TOKEN);
-
- while ((SLang_Error == 0)
- && (ctok->type == IDENT_TOKEN))
- {
- compile_token (ctok);
- if (COMMA_TOKEN != get_token (ctok))
- break;
-
- get_token (ctok);
- }
-
- if (CPAREN_TOKEN != ctok->type)
- {
- _SLparse_error("Expecting )", ctok, 0);
- return;
- }
- compile_token_of_type(CBRACKET_TOKEN);
-
- get_token (ctok);
-}
-
-void try_multiple_assignment (_SLang_Token_Type *ctok)
-{
- /* This is called with ctok->type == OPAREN_TOKEN. We have no idea
- * what follows this. There are various possibilities such as:
- * @ () = x;
- * @ ( expression ) = x;
- * @ ( expression ) ;
- * @ ( expression ) OP expression;
- * @ ( expression ) [expression] = expression;
- * and only the first two constitute a multiple assignment. The last
- * two forms create the difficulty.
- *
- * Here is the plan. First parse (expression) and then check next token.
- * If it is an equal operator, then it will be parsed as a multiple
- * assignment. In fact, that is the easy part.
- *
- * The hard part stems from the fact that by parsing (expression), we
- * have effectly truncated the parse if (expression) is part of a binary
- * or unary expression. Somehow, the parsing must be resumed. The trick
- * here is to use a dummy literal that generates no code: NO_OP_LITERAL
- * Using it, we just call 'expression' and proceed.
- */
-
- if (NULL == push_token_list ())
- return;
-
- get_token (ctok);
-
- if (ctok->type != CPAREN_TOKEN)
- {
- expression_with_commas (ctok, 1);
- if (ctok->type != CPAREN_TOKEN)
- {
- _SLparse_error ("Expecting )", ctok, 0);
- return;
- }
- }
-
- switch (get_token (ctok))
- {
- case ASSIGN_TOKEN:
- case PLUSEQS_TOKEN:
- case MINUSEQS_TOKEN:
- case TIMESEQS_TOKEN:
- case DIVEQS_TOKEN:
- case BOREQS_TOKEN:
- case BANDEQS_TOKEN:
- do_multiple_assignment (ctok);
- pop_token_list (1);
- break;
-
- default:
- unget_token (ctok);
- ctok->type = NO_OP_LITERAL;
- expression (ctok);
- compile_token_list ();
- break;
- }
-}
-
-/* Note: expression never gets compiled directly. Rather, it gets
- * appended to the token list and then compiled by a calling
- * routine.
- */
-
-/* expression:
- * simple_expression
- * simple-expression , expression
- * <none>
- */
-static void expression_with_commas (_SLang_Token_Type *ctok, int save_comma)
-{
- while (SLang_Error == 0)
- {
- if (ctok->type != COMMA_TOKEN)
- {
- if (ctok->type == CPAREN_TOKEN)
- return;
-
- simple_expression (ctok);
-
- if (ctok->type != COMMA_TOKEN)
- break;
- }
- if (save_comma) append_token (ctok);
- get_token (ctok);
- }
-}
-
-static void expression (_SLang_Token_Type *ctok)
-{
- expression_with_commas (ctok, 0);
-}
-
-/* priority levels of binary operations */
-static unsigned char Binop_Level[] =
-{
-/* ADD_TOKEN */ 2,
-/* SUB_TOKEN */ 2,
-/* MUL_TOKEN */ 1,
-/* DIV_TOKEN */ 1,
-/* LT_TOKEN */ 4,
-/* LE_TOKEN */ 4,
-/* GT_TOKEN */ 4,
-/* GE_TOKEN */ 4,
-/* EQ_TOKEN */ 5,
-/* NE_TOKEN */ 5,
-/* AND_TOKEN */ 9,
-/* OR_TOKEN */ 10,
-/* MOD_TOKEN */ 1,
-/* BAND_TOKEN */ 6,
-/* SHL_TOKEN */ 3,
-/* SHR_TOKEN */ 3,
-/* BXOR_TOKEN */ 7,
-/* BOR_TOKEN */ 8,
-/* POUND_TOKEN */ 1 /* Matrix Multiplication */
-};
-
-/* % Note: simple-expression groups operators OP1 at same level. The
- * % actual implementation will not do this.
- * simple-expression:
- * unary-expression
- * binary-expression BINARY-OP unary-expression
- * andelse xxelse-expression-list
- * orelse xxelse-expression-list
- *
- * xxelse-expression-list:
- * { expression }
- * xxelse-expression-list { expression }
- * binary-expression:
- * unary-expression
- * unary-expression BINARY-OP binary-expression
- */
-static void simple_expression (_SLang_Token_Type *ctok)
-{
- unsigned char type;
- unsigned char op_stack [64];
- unsigned char level_stack [64];
- unsigned char level;
- unsigned int op_num;
-
- switch (ctok->type)
- {
- case ANDELSE_TOKEN:
- case ORELSE_TOKEN:
- type = ctok->type;
- if (OBRACE_TOKEN != get_token (ctok))
- {
- _SLparse_error ("Expecting '{'", ctok, 0);
- return;
- }
-
- while (ctok->type == OBRACE_TOKEN)
- {
- append_token (ctok);
- get_token (ctok);
- expression (ctok);
- if (CBRACE_TOKEN != ctok->type)
- {
- _SLparse_error("Expecting }", ctok, 0);
- return;
- }
- append_token (ctok);
- get_token (ctok);
- }
- append_token_of_type (type);
- return;
-
- /* avoid unary-expression if possible */
- case STRING_TOKEN:
- append_token (ctok);
- get_token (ctok);
- break;
-
- default:
- unary_expression (ctok);
- break;
- }
-
- if (SEMICOLON_TOKEN == (type = ctok->type))
- return;
-
- op_num = 0;
-
- while ((SLang_Error == 0)
- && (IS_BINARY_OP(type)))
- {
- level = Binop_Level[type - FIRST_BINARY_OP];
-
- while ((op_num > 0) && (level_stack [op_num - 1] <= level))
- append_token_of_type (op_stack [--op_num]);
-
- if (op_num >= sizeof (op_stack) - 1)
- {
- _SLparse_error ("Binary op stack overflow", ctok, 0);
- return;
- }
-
- op_stack [op_num] = type;
- level_stack [op_num] = level;
- op_num++;
-
- get_token (ctok);
- unary_expression (ctok);
- type = ctok->type;
- }
-
- while (op_num > 0)
- append_token_of_type(op_stack[--op_num]);
-}
-
-/* unary-expression:
- * postfix-expression
- * ++ postfix-expression
- * -- postfix-expression
- * case unary-expression
- * OP3 unary-expression
- * (OP3: + - ~ & not @)
- *
- * Note: This grammar permits: case case case WHATEVER
- */
-static void unary_expression (_SLang_Token_Type *ctok)
-{
- unsigned char save_unary_ops [16];
- unsigned int num_unary_ops;
- unsigned char type;
- _SLang_Token_Type *last_token;
-
- num_unary_ops = 0;
- while (SLang_Error == 0)
- {
- type = ctok->type;
-
- switch (type)
- {
- case PLUSPLUS_TOKEN:
- case MINUSMINUS_TOKEN:
- get_token (ctok);
- postfix_expression (ctok);
- check_for_lvalue (type, NULL);
- goto out_of_switch;
-
- case ADD_TOKEN:
- get_token (ctok); /* skip it-- it's unary here */
- break;
-
- case SUB_TOKEN:
- (void) get_token (ctok);
- if (IS_INTEGER_TOKEN (ctok->type))
- {
- ctok->v.long_val = -ctok->v.long_val;
- break;
- }
-
- if (num_unary_ops == 16)
- goto stack_overflow_error;
- save_unary_ops [num_unary_ops++] = CHS_TOKEN;
- break;
-
- case DEREF_TOKEN:
- case BNOT_TOKEN:
- case NOT_TOKEN:
- case CASE_TOKEN:
- if (num_unary_ops == 16)
- goto stack_overflow_error;
-
- save_unary_ops [num_unary_ops++] = type;
- get_token (ctok);
- break;
-
- /* Try to avoid ->postfix_expression->primary_expression
- * subroutine calls.
- */
- case STRING_TOKEN:
- append_token (ctok);
- get_token (ctok);
- goto out_of_switch;
-
- default:
- postfix_expression (ctok);
- goto out_of_switch;
- }
- }
-
- out_of_switch:
- if (num_unary_ops == 0)
- return;
-
- if ((DEREF_TOKEN == save_unary_ops[num_unary_ops - 1])
- && (NULL != (last_token = get_last_token ()))
- && (IS_ASSIGN_TOKEN(last_token->type)))
- {
- /* FIXME: Priority=medium
- * This needs generalized so that things like @a.y = 1 will work properly.
- */
- if ((num_unary_ops != 1)
- || (last_token->type != _SCALAR_ASSIGN_TOKEN))
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "Only derefence assignments to simple variables are possible");
- return;
- }
-
- last_token->type += (_DEREF_ASSIGN_TOKEN - _SCALAR_ASSIGN_TOKEN);
- return;
- }
-
- while (num_unary_ops)
- {
- num_unary_ops--;
- append_token_of_type (save_unary_ops [num_unary_ops]);
- }
- return;
-
- stack_overflow_error:
- _SLparse_error ("Too many unary operators.", ctok, 0);
-}
-
-static int combine_namespace_tokens (_SLang_Token_Type *a, _SLang_Token_Type *b)
-{
- char *sa, *sb, *sc;
- unsigned int lena, lenb;
- unsigned long hash;
-
- /* This is somewhat of a hack. Combine the TWO identifier names
- * (NAMESPACE) and (name) into the form NAMESPACE->name. Then when the
- * byte compiler compiles the object it will not be found. It will then
- * check for this hack and make the appropriate namespace lookup.
- */
-
- sa = a->v.s_val;
- sb = b->v.s_val;
-
- lena = strlen (sa);
- lenb = strlen (sb);
-
- sc = SLmalloc (lena + lenb + 3);
- if (sc == NULL)
- return -1;
-
- strcpy (sc, sa);
- strcpy (sc + lena, "->");
- strcpy (sc + lena + 2, sb);
-
- sb = _SLstring_make_hashed_string (sc, lena + lenb + 2, &hash);
- SLfree (sc);
- if (sb == NULL)
- return -1;
-
- /* I can free this string because no other token should be referencing it.
- * (num_refs == 1).
- */
- _SLfree_hashed_string (sa, lena, a->hash);
- a->v.s_val = sb;
- a->hash = hash;
-
- return 0;
-}
-
-static void append_identifier_token (_SLang_Token_Type *ctok)
-{
- _SLang_Token_Type *last_token;
-
- append_token (ctok);
-
- if (NAMESPACE_TOKEN != get_token (ctok))
- return;
-
- if (IDENT_TOKEN != get_token (ctok))
- {
- _SLparse_error ("Expecting name-space identifier", ctok, 0);
- return;
- }
-
- last_token = get_last_token ();
- if (-1 == combine_namespace_tokens (last_token, ctok))
- return;
-
- (void) get_token (ctok);
-}
-
-static int get_identifier_expr_token (_SLang_Token_Type *ctok)
-{
- _SLang_Token_Type next_token;
-
- if (IDENT_TOKEN != get_identifier_token (ctok))
- return -1;
-
- init_token (&next_token);
- if (NAMESPACE_TOKEN != get_token (&next_token))
- {
- unget_token (&next_token);
- return IDENT_TOKEN;
- }
-
- if (IDENT_TOKEN != get_identifier_token (&next_token))
- {
- free_token (&next_token);
- return -1;
- }
-
- if (-1 == combine_namespace_tokens (ctok, &next_token))
- {
- free_token (&next_token);
- return -1;
- }
- free_token (&next_token);
- return IDENT_TOKEN;
-}
-
-/* postfix-expression:
- * primary-expression
- * postfix-expression [ expression ]
- * postfix-expression ( function-args-expression )
- * postfix-expression . identifier
- * postfix-expression ^ unary-expression
- * postfix-expression ++
- * postfix-expression --
- * postfix-expression = simple-expression
- * postfix-expression += simple-expression
- * postfix-expression -= simple-expression
- *
- * primary-expression:
- * literal
- * identifier-expr
- * ( expression_opt )
- * [ inline-array-expression ]
- * &identifier-expr
- * struct-definition
- * __tmp(identifier-expr)
- *
- * identifier-expr:
- * identifier
- * identifier->identifier
- */
-static void postfix_expression (_SLang_Token_Type *ctok)
-{
- unsigned int start_pos, end_pos;
- unsigned char type;
-
- if (Token_List == NULL)
- return;
-
- start_pos = Token_List->len;
-
- switch (ctok->type)
- {
- case IDENT_TOKEN:
- append_identifier_token (ctok);
- break;
-
- case CHAR_TOKEN:
- case SHORT_TOKEN:
- case INT_TOKEN:
- case LONG_TOKEN:
- case UCHAR_TOKEN:
- case USHORT_TOKEN:
- case UINT_TOKEN:
- case ULONG_TOKEN:
- case STRING_TOKEN:
- case BSTRING_TOKEN:
-#ifdef SLANG_HAS_FLOAT
- case DOUBLE_TOKEN:
- case FLOAT_TOKEN:
-#endif
-#ifdef SLANG_HAS_COMPLEX
- case COMPLEX_TOKEN:
-#endif
- append_token (ctok);
- get_token (ctok);
- break;
-
- case OPAREN_TOKEN:
- if (CPAREN_TOKEN != get_token (ctok))
- {
- expression (ctok);
- if (ctok->type != CPAREN_TOKEN)
- _SLparse_error("Expecting )", ctok, 0);
- }
- get_token (ctok);
- break;
-
- case BAND_TOKEN:
- if (IDENT_TOKEN != get_identifier_expr_token (ctok))
- break;
-
- ctok->type = _REF_TOKEN;
- append_token (ctok);
- get_token (ctok);
- break;
-
- case OBRACKET_TOKEN:
- get_token (ctok);
- inline_array_expression (ctok);
- break;
-
- case NO_OP_LITERAL:
- /* This token was introduced by try_multiple_assignment. There,
- * a new token_list was pushed and (expression) was evaluated.
- * NO_OP_LITERAL represents the result of expression. However,
- * we need to tweak the start_pos variable to point to the beginning
- * of the token list to complete the equivalence.
- */
- start_pos = 0;
- get_token (ctok);
- break;
-
- case STRUCT_TOKEN:
- get_token (ctok);
- struct_declaration (ctok);
- break;
-
- case TMP_TOKEN:
- get_token (ctok);
- if (ctok->type == OPAREN_TOKEN)
- {
- if (IDENT_TOKEN == get_identifier_expr_token (ctok))
- {
- ctok->type = TMP_TOKEN;
- append_token (ctok);
- get_token (ctok);
- if (ctok->type == CPAREN_TOKEN)
- {
- get_token (ctok);
- break;
- }
- }
- }
- _SLparse_error ("Expecting form __tmp(NAME)", ctok, 0);
- break;
-
- default:
- if (IS_INTERNAL_FUNC(ctok->type))
- {
- append_token (ctok);
- get_token (ctok);
- }
- else
- _SLparse_error("Expecting a PRIMARY", ctok, 0);
- }
-
- while (SLang_Error == 0)
- {
- end_pos = Token_List->len;
- type = ctok->type;
- switch (type)
- {
- case OBRACKET_TOKEN: /* X[args] ==> [args] X ARRAY */
- get_token (ctok);
- append_token_of_type (ARG_TOKEN);
- if (ctok->type != CBRACKET_TOKEN)
- array_index_expression (ctok);
-
- if (ctok->type != CBRACKET_TOKEN)
- {
- _SLparse_error ("Expecting ']'", ctok, 0);
- return;
- }
- get_token (ctok);
- /* append_token_of_type (EARG_TOKEN); -- ARRAY_TOKEN implicitely does this */
- token_list_element_exchange (start_pos, end_pos);
- append_token_of_type (ARRAY_TOKEN);
- break;
-
- case OPAREN_TOKEN:
- /* f(args) ==> args f */
- if (CPAREN_TOKEN != get_token (ctok))
- {
- function_args_expression (ctok, 1);
- token_list_element_exchange (start_pos, end_pos);
- }
- else get_token (ctok);
- break;
-
- case DOT_TOKEN:
- /* S.a ==> "a" S DOT
- * This means that if S is X[b], then X[b].a ==> a b X ARRAY DOT
- * and f(a).X[b].c ==> "c" b "X" a f . ARRAY .
- * Also, f(a).X[b] = g(x); ==> x g b "X" a f .
- */
- if (IDENT_TOKEN != get_identifier_token (ctok))
- return;
-
- ctok->type = DOT_TOKEN;
- append_token (ctok);
- get_token (ctok);
- break;
-
- case PLUSPLUS_TOKEN:
- case MINUSMINUS_TOKEN:
- check_for_lvalue (type, NULL);
- get_token (ctok);
- break;
-
- case ASSIGN_TOKEN:
- case PLUSEQS_TOKEN:
- case MINUSEQS_TOKEN:
- case TIMESEQS_TOKEN:
- case DIVEQS_TOKEN:
- case BOREQS_TOKEN:
- case BANDEQS_TOKEN:
- check_for_lvalue (type, NULL);
- get_token (ctok);
- simple_expression (ctok);
- token_list_element_exchange (start_pos, end_pos);
- break;
-
- case POW_TOKEN:
- get_token (ctok);
- unary_expression (ctok);
- append_token_of_type (POW_TOKEN);
- break;
-
- default:
- return;
- }
- }
-}
-
-static void function_args_expression (_SLang_Token_Type *ctok, int handle_num_args)
-{
- unsigned char last_type, this_type;
-
- if (handle_num_args) append_token_of_type (ARG_TOKEN);
-
- last_type = COMMA_TOKEN;
-
- while (SLang_Error == 0)
- {
- this_type = ctok->type;
-
- switch (this_type)
- {
- case COMMA_TOKEN:
- if (last_type == COMMA_TOKEN)
- append_token_of_type (_NULL_TOKEN);
- get_token (ctok);
- break;
-
- case CPAREN_TOKEN:
- if (last_type == COMMA_TOKEN)
- append_token_of_type (_NULL_TOKEN);
- if (handle_num_args) append_token_of_type (EARG_TOKEN);
- get_token (ctok);
- return;
-
- default:
- simple_expression (ctok);
- if ((ctok->type != COMMA_TOKEN)
- && (ctok->type != CPAREN_TOKEN))
- {
- _SLparse_error ("Expecting ')'", ctok, 0);
- break;
- }
- }
- last_type = this_type;
- }
-}
-
-static int check_for_lvalue (unsigned char eqs_type, _SLang_Token_Type *ctok)
-{
- unsigned char type;
-
- if ((ctok == NULL)
- && (NULL == (ctok = get_last_token ())))
- return -1;
-
- type = ctok->type;
-
- eqs_type -= ASSIGN_TOKEN;
-
- if (type == IDENT_TOKEN)
- eqs_type += _SCALAR_ASSIGN_TOKEN;
- else if (type == ARRAY_TOKEN)
- eqs_type += _ARRAY_ASSIGN_TOKEN;
- else if (type == DOT_TOKEN)
- eqs_type += _STRUCT_ASSIGN_TOKEN;
- else
- {
- _SLparse_error ("Expecting LVALUE", ctok, 0);
- return -1;
- }
-
- ctok->type = eqs_type;
- return 0;
-}
-
-static void array_index_expression (_SLang_Token_Type *ctok)
-{
- unsigned int num_commas;
-
- num_commas = 0;
- while (1)
- {
- switch (ctok->type)
- {
- case COLON_TOKEN:
- if (num_commas)
- _SLparse_error ("Misplaced ':'", ctok, 0);
- return;
-
- case TIMES_TOKEN:
- append_token_of_type (_INLINE_WILDCARD_ARRAY_TOKEN);
- get_token (ctok);
- break;
-
- case COMMA_TOKEN:
- _SLparse_error ("Misplaced ','", ctok, 0);
- return;
-
- default:
- simple_expression (ctok);
- }
-
- if (ctok->type != COMMA_TOKEN)
- return;
- num_commas++;
- get_token (ctok);
- }
-}
-
-/* inline-array-expression:
- * array_index_expression
- * simple_expression : simple_expression
- * simple_expression : simple_expression : simple_expression
- */
-static void inline_array_expression (_SLang_Token_Type *ctok)
-{
- int num_colons = 0;
-
- append_token_of_type (ARG_TOKEN);
-
- if (ctok->type == COLON_TOKEN) /* [:...] */
- append_token_of_type (_NULL_TOKEN);
- else if (ctok->type != CBRACKET_TOKEN)
- array_index_expression (ctok);
-
- if (ctok->type == COLON_TOKEN)
- {
- num_colons++;
- if ((COLON_TOKEN == get_token (ctok))
- || (ctok->type == CBRACKET_TOKEN))
- append_token_of_type (_NULL_TOKEN);
- else
- simple_expression (ctok);
-
- if (ctok->type == COLON_TOKEN)
- {
- num_colons++;
- get_token (ctok);
- simple_expression (ctok);
- }
- }
-
- if (ctok->type != CBRACKET_TOKEN)
- {
- _SLparse_error ("Expecting ']'", ctok, 0);
- return;
- }
-
- /* append_token_of_type (EARG_TOKEN); */
- if (num_colons)
- append_token_of_type (_INLINE_IMPLICIT_ARRAY_TOKEN);
- else
- append_token_of_type (_INLINE_ARRAY_TOKEN);
- get_token (ctok);
-}
-
-static void do_multiple_assignment (_SLang_Token_Type *ctok)
-{
- _SLang_Token_Type *s;
- unsigned int i, k, len;
- unsigned char assign_type;
-
- assign_type = ctok->type;
-
- /* The LHS token list has already been pushed. Here we do the RHS
- * so push to another token list, process it, then come back to
- * LHS for assignment.
- */
- if (NULL == push_token_list ())
- return;
-
- get_token (ctok);
- expression (ctok);
- compile_token_list ();
-
- if (SLang_Error)
- return;
-
- /* Finally compile the LHS of the assignment expression
- * that has been saved.
- */
- s = Token_List->stack;
- len = Token_List->len;
-
- if (len == 0)
- {
- compile_token_of_type (POP_TOKEN);
- return;
- }
-
- while (len > 0)
- {
- /* List is of form:
- * a , b, c d e, f , g , , , h ,
- * The missing expressions will be replaced by a POP
- * ,,a
- */
-
- /* Start from back looking for a COMMA */
- k = len - 1;
- if (s[k].type == COMMA_TOKEN)
- {
- compile_token_of_type (POP_TOKEN);
- len = k;
- continue;
- }
-
- if (-1 == check_for_lvalue (assign_type, s + k))
- return;
-
- i = 0;
- while (1)
- {
- if (s[k].type == COMMA_TOKEN)
- {
- i = k + 1;
- break;
- }
-
- if (k == 0)
- break;
-
- k--;
- }
-
- while (i < len)
- {
- compile_token (s + i);
- i++;
- }
-
- len = k;
- }
-
- if (s[0].type == COMMA_TOKEN)
- compile_token_of_type (POP_TOKEN);
-}
-
diff --git a/mdk-stage1/slang/slpath.c b/mdk-stage1/slang/slpath.c
deleted file mode 100644
index 831bd34df..000000000
--- a/mdk-stage1/slang/slpath.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/* Pathname and filename functions */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#ifdef HAVE_IO_H
-# include <io.h>
-#endif
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <time.h>
-
-#include <errno.h>
-#include <string.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-/* In this file, all file names are assumed to be specified in the Unix
- * format, or in the native format.
- *
- * Aboout VMS:
- * VMS pathnames are a mess. In general, they look like
- * node::device:[dir.dir]file.ext;version
- * and I do not know of a well-defined Unix representation for them. So,
- * I am going to punt and encourage users to stick to the native
- * representation.
- */
-
-#if defined(IBMPC_SYSTEM)
-# define PATH_SEP '\\'
-# define DRIVE_SPECIFIER ':'
-# define SEARCH_PATH_DELIMITER ';'
-# define THIS_DIR_STRING "."
-#else
-# if defined(VMS)
-# define PATH_SEP ']'
-# define DRIVE_SPECIFIER ':'
-# define SEARCH_PATH_DELIMITER ' '
-# define THIS_DIR_STRING "[]" /* Is this correct?? */
-# else
-# define PATH_SEP '/'
-# define UNIX_PATHNAMES_OK
-# define SEARCH_PATH_DELIMITER ':'
-# define THIS_DIR_STRING "."
-# endif
-#endif
-
-#ifdef UNIX_PATHNAMES_OK
-# define IS_PATH_SEP(x) ((x) == PATH_SEP)
-#else
-# define IS_PATH_SEP(x) (((x) == PATH_SEP) || ((x) == '/'))
-#endif
-
-/* If file is /a/b/c/basename, this function returns a pointer to basename */
-char *SLpath_basename (char *file)
-{
- char *b;
-
- if (file == NULL) return NULL;
- b = file + strlen (file);
-
- while (b != file)
- {
- b--;
- if (IS_PATH_SEP(*b))
- return b + 1;
-#ifdef DRIVE_SPECIFIER
- if (*b == DRIVE_SPECIFIER)
- return b + 1;
-#endif
- }
-
- return b;
-}
-
-/* Returns a malloced string */
-char *SLpath_pathname_sans_extname (char *file)
-{
- char *b;
-
- file = SLmake_string (file);
- if (file == NULL)
- return NULL;
-
- b = file + strlen (file);
-
- while (b != file)
- {
- b--;
- if (*b == '.')
- {
- *b = 0;
- return file;
- }
- }
-
- return file;
-}
-
-/* If path looks like: A/B/C/D/whatever, it returns A/B/C/D as a malloced
- * string.
- */
-char *SLpath_dirname (char *file)
-{
- char *b;
-
- if (file == NULL) return NULL;
- b = file + strlen (file);
-
- while (b != file)
- {
- b--;
- if (IS_PATH_SEP(*b))
- {
- if (b == file) b++;
- break;
- }
-
-#ifdef DRIVE_SPECIFIER
- if (*b == DRIVE_SPECIFIER)
- {
- b++;
- break;
- }
-#endif
- }
-
- if (b == file)
- return SLmake_string (THIS_DIR_STRING);
-
- return SLmake_nstring (file, (unsigned int) (b - file));
-}
-
-/* Note: VMS filenames also contain version numbers. The caller will have
- * to deal with that.
- *
- * The extension includes the '.'. If no extension is present, "" is returned.
- */
-char *SLpath_extname (char *file)
-{
- char *b;
-
- if (NULL == (file = SLpath_basename (file)))
- return NULL;
-
- b = file + strlen (file);
- while (b != file)
- {
- b--;
- if (*b == '.')
- return b;
- }
-
- if (*b == '.')
- return b;
-
- /* Do not return a literal "" */
- return file + strlen (file);
-}
-
-#ifdef IBMPC_SYSTEM
-static void convert_slashes (char *f)
-{
- while (*f)
- {
- if (*f == '/') *f = PATH_SEP;
- f++;
- }
-}
-#endif
-
-int SLpath_is_absolute_path (char *name)
-{
-#ifdef UNIX_PATHNAMES_OK
- return (*name == '/');
-#else
- if (IS_PATH_SEP (*name))
- return 1;
-
-# ifdef DRIVE_SPECIFIER
- /* Look for a drive specifier */
- while (*name)
- {
- if (*name == DRIVE_SPECIFIER)
- return 1;
-
- name++;
- }
-# endif
-
- return 0;
-#endif
-}
-
-/* This returns a MALLOCED string */
-char *SLpath_dircat (char *dir, char *name)
-{
- unsigned int len, dirlen;
- char *file;
-#ifndef VMS
- int requires_fixup;
-#endif
-
- if (name == NULL)
- name = "";
-
- if ((dir == NULL) || (SLpath_is_absolute_path (name)))
- dir = "";
-
- /* Both VMS and MSDOS have default directories associated with each drive.
- * That is, the meaning of something like C:X depends upon more than just
- * the syntax of the string. Since this concept has more power under VMS
- * it will be honored here. However, I am going to treat C:X as C:\X
- * under MSDOS.
- *
- * Note!!!
- * VMS has problems of its own regarding path names, so I am simply
- * going to strcat. Hopefully the VMS RTL is smart enough to deal with
- * the result.
- */
- dirlen = strlen (dir);
-#ifndef VMS
- requires_fixup = (dirlen && (0 == IS_PATH_SEP(dir[dirlen - 1])));
-#endif
-
- len = dirlen + strlen (name) + 2;
- if (NULL == (file = SLmalloc (len)))
- return NULL;
-
- strcpy (file, dir);
-
-#ifndef VMS
- if (requires_fixup)
- file[dirlen++] = PATH_SEP;
-#endif
-
- strcpy (file + dirlen, name);
-
-#if defined(IBMPC_SYSTEM)
- convert_slashes (file);
-#endif
-
- return file;
-}
-
-int SLpath_file_exists (char *file)
-{
- struct stat st;
- int m;
-
-#if defined(__os2__) && !defined(S_IFMT)
-/* IBM VA3 doesn't declare S_IFMT */
-# define S_IFMT (S_IFDIR | S_IFCHR | S_IFREG)
-#endif
-
-#ifdef _S_IFDIR
-# ifndef S_IFDIR
-# define S_IFDIR _S_IFDIR
-# endif
-#endif
-
-#ifndef S_ISDIR
-# ifdef S_IFDIR
-# define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-# else
-# define S_ISDIR(m) 0
-# endif
-#endif
-
- if (file == NULL)
- return -1;
-
- if (stat(file, &st) < 0) return 0;
- m = st.st_mode;
-
- if (S_ISDIR(m)) return (2);
- return 1;
-}
-
-char *SLpath_find_file_in_path (char *path, char *name)
-{
- unsigned int max_path_len;
- unsigned int this_path_len;
- char *file, *dir;
- char *p;
- unsigned int nth;
-
- if ((path == NULL) || (*path == 0)
- || (name == NULL) || (*name == 0))
- return NULL;
-
- max_path_len = 0;
- this_path_len = 0;
- p = path;
- while (*p != 0)
- {
- if (*p++ == SEARCH_PATH_DELIMITER)
- {
- if (this_path_len > max_path_len) max_path_len = this_path_len;
- this_path_len = 0;
- }
- else this_path_len++;
- }
- if (this_path_len > max_path_len) max_path_len = this_path_len;
- max_path_len++;
-
- if (NULL == (dir = SLmalloc (max_path_len)))
- return NULL;
-
- nth = 0;
- while (-1 != SLextract_list_element (path, nth, SEARCH_PATH_DELIMITER,
- dir, max_path_len))
- {
- nth++;
- if (*dir == 0)
- continue;
-
- if (NULL == (file = SLpath_dircat (dir, name)))
- {
- SLfree (dir);
- return NULL;
- }
-
- if (1 == SLpath_file_exists (file))
- {
- SLfree (dir);
- return file;
- }
-
- SLfree (file);
- }
-
- SLfree (dir);
- return NULL;
-}
-
diff --git a/mdk-stage1/slang/slposdir.c b/mdk-stage1/slang/slposdir.c
deleted file mode 100644
index 33799e574..000000000
--- a/mdk-stage1/slang/slposdir.c
+++ /dev/null
@@ -1,1057 +0,0 @@
-/* file intrinsics for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if defined(__unix__) || (defined (__os2__) && defined (__EMX__))
-# include <sys/types.h>
-#endif
-
-#ifdef HAVE_IO_H
-# include <io.h> /* for chmod */
-#endif
-
-#if defined(__BORLANDC__)
-# include <process.h>
-# include <dos.h>
-#endif
-
-#ifdef HAVE_FCNTL_H
-# include <fcntl.h>
-#endif
-#ifdef HAVE_SYS_FCNTL_H
-# include <sys/fcntl.h>
-#endif
-
-#ifdef __unix__
-# include <sys/file.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <dir.h>
-#endif
-
-#if defined(_MSC_VER)
-# include <io.h>
-#endif
-
-#if defined(__DECC) && defined(VMS)
-# include <unixio.h>
-# include <unixlib.h>
-#endif
-
-#ifdef VMS
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#if defined(VMS)
-# define USE_LISTDIR_INTRINSIC 0
-#else
-# define USE_LISTDIR_INTRINSIC 1
-#endif
-
-#if USE_LISTDIR_INTRINSIC
-
-#if defined(__WIN32__)
-# include <windows.h>
-#else
-# if defined(__OS2__) && defined(__IBMC__)
-# define INCL_DOS
-# define INCL_ERRORS
-# include <os2.h>
-# include <direct.h>
-# include <ctype.h>
-# else
-# ifdef HAVE_DIRENT_H
-# include <dirent.h>
-# else
-# ifdef HAVE_DIRECT_H
-# include <direct.h>
-# else
-# define dirent direct
-# define NEED_D_NAMLEN
-# if HAVE_SYS_NDIR_H
-# include <sys/ndir.h>
-# endif
-# if HAVE_SYS_DIR_H
-# include <sys/dir.h>
-# endif
-# if HAVE_NDIR_H
-# include <ndir.h>
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#endif /* USE_LISTDIR_INTRINSIC */
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-static int push_stat_struct (struct stat *st, int opt_attrs)
-{
- char *field_names [12];
- unsigned char field_types[12];
- VOID_STAR field_values [12];
- int int_values [12];
- unsigned int i;
-
- field_names [0] = "st_dev"; int_values [0] = (int) st->st_dev;
- field_names [1] = "st_ino"; int_values [1] = (int) st->st_ino;
- field_names [2] = "st_mode"; int_values [2] = (int) st->st_mode;
- field_names [3] = "st_nlink"; int_values [3] = (int) st->st_nlink;
- field_names [4] = "st_uid"; int_values [4] = (int) st->st_uid;
- field_names [5] = "st_gid"; int_values [5] = (int) st->st_gid;
- field_names [6] = "st_rdev"; int_values [6] = (int) st->st_rdev;
- field_names [7] = "st_size"; int_values [7] = (int) st->st_size;
- field_names [8] = "st_atime"; int_values [8] = (int) st->st_atime;
- field_names [9] = "st_mtime"; int_values [9] = (int) st->st_mtime;
- field_names [10] = "st_ctime"; int_values [10] = (int) st->st_ctime;
-
- field_names [11] = "st_opt_attrs"; int_values[11] = opt_attrs;
-
- for (i = 0; i < 12; i++)
- {
- field_types [i] = SLANG_INT_TYPE;
- field_values [i] = (VOID_STAR) (int_values + i);
- }
-
- return SLstruct_create_struct (12, field_names, field_types, field_values);
-}
-
-static void stat_cmd (char *file)
-{
- struct stat st;
- int status;
- int opt_attrs;
-
- status = stat (file, &st);
-
-#if defined(__MSDOS__) || defined(__WIN32__)
- if (status == -1)
- {
- unsigned int len = strlen (file);
- if (len && ((file[len-1] == '\\') || (file[len-1] == '/')))
- {
- file = SLmake_nstring (file, len-1);
- if (file == NULL)
- return;
-
- status = stat (file, &st);
- SLfree (file);
- }
- }
-#endif
- if (status == -1)
- {
- _SLerrno_errno = errno;
- SLang_push_null ();
- return;
- }
-
-#ifdef __WIN32__
- opt_attrs = GetFileAttributes (file);
-#else
- opt_attrs = 0;
-#endif
-
- push_stat_struct (&st, opt_attrs);
-}
-
-static void lstat_cmd (char *file)
-{
-#ifdef HAVE_LSTAT
- struct stat st;
- int opt_attrs;
-
- if (-1 == lstat (file, &st))
- {
- _SLerrno_errno = errno;
- SLang_push_null ();
- return;
- }
-
-#ifdef __WIN32__
- opt_attrs = GetFileAttributes (file);
-#else
- opt_attrs = 0;
-#endif
-
- push_stat_struct (&st, opt_attrs);
-#else
- stat_cmd (file);
-#endif
-}
-
-/* Well, it appears that on some systems, these are not defined. Here I
- * provide them. These are derived from the Linux stat.h file.
- */
-
-#ifdef __os2__
-# ifdef __IBMC__
-/* IBM VA3 doesn't declare S_IFMT */
-# define S_IFMT (S_IFDIR | S_IFCHR | S_IFREG)
-# endif
-#endif
-
-#ifndef S_ISLNK
-# ifdef S_IFLNK
-# define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
-# else
-# define S_ISLNK(m) 0
-# endif
-#endif
-
-#ifndef S_ISREG
-# ifdef S_IFREG
-# define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
-# else
-# define S_ISREG(m) 0
-# endif
-#endif
-
-#ifndef S_ISDIR
-# ifdef S_IFDIR
-# define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-# else
-# define S_ISDIR(m) 0
-# endif
-#endif
-
-#ifndef S_ISCHR
-# ifdef S_IFCHR
-# define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
-# else
-# define S_ISCHR(m) 0
-# endif
-#endif
-
-#ifndef S_ISBLK
-# ifdef S_IFBLK
-# define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
-# else
-# define S_ISBLK(m) 0
-# endif
-#endif
-
-#ifndef S_ISFIFO
-# ifdef S_IFIFO
-# define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
-# else
-# define S_ISFIFO(m) 0
-# endif
-#endif
-
-#ifndef S_ISSOCK
-# ifdef S_IFSOCK
-# define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
-# else
-# define S_ISSOCK(m) 0
-# endif
-#endif
-
-static char stat_is_cmd (char *what, int *mode_ptr)
-{
- int ret;
- int st_mode = *mode_ptr;
-
- if (!strcmp (what, "sock")) ret = S_ISSOCK(st_mode);
- else if (!strcmp (what, "fifo")) ret = S_ISFIFO(st_mode);
- else if (!strcmp (what, "blk")) ret = S_ISBLK(st_mode);
- else if (!strcmp (what, "chr")) ret = S_ISCHR(st_mode);
- else if (!strcmp (what, "dir")) ret = S_ISDIR(st_mode);
- else if (!strcmp (what, "reg")) ret = S_ISREG(st_mode);
- else if (!strcmp (what, "lnk")) ret = S_ISLNK(st_mode);
- else
- {
- SLang_verror (SL_INVALID_PARM, "stat_is: Unrecognized type: %s", what);
- return -1;
- }
-
- return (char) (ret != 0);
-}
-
-#ifdef HAVE_READLINK
-static void readlink_cmd (char *s)
-{
- char buf[2048];
- int n;
-
- n = readlink (s, buf, sizeof (buf)-1);
- if (n == -1)
- {
- _SLerrno_errno = errno;
- s = NULL;
- }
- else
- {
- buf[n] = 0;
- s = buf;
- }
-
- (void) SLang_push_string (s);
-}
-#endif
-
-static int chmod_cmd (char *file, int *mode)
-{
- if (-1 == chmod(file, (mode_t) *mode))
- {
- _SLerrno_errno = errno;
- return -1;
- }
- return 0;
-}
-
-#ifdef HAVE_CHOWN
-static int chown_cmd (char *file, int *owner, int *group)
-{
- int ret;
-
- if (-1 == (ret = chown(file, (uid_t) *owner, (gid_t) *group)))
- _SLerrno_errno = errno;
- return ret;
-}
-#endif
-
-/* add trailing slash to dir */
-static void fixup_dir (char *dir)
-{
-#ifndef VMS
- int n;
-
- if ((n = strlen(dir)) > 1)
- {
- n--;
-#if defined(IBMPC_SYSTEM)
- if ( dir[n] != '/' && dir[n] != '\\' )
- strcat(dir, "\\" );
-#else
- if (dir[n] != '/' )
- strcat(dir, "/" );
-#endif
- }
-#endif /* !VMS */
-}
-
-static void slget_cwd (void)
-{
- char cwd[1024];
- char *p;
-
-#ifndef HAVE_GETCWD
- p = getwd (cwd);
-#else
-# if defined (__EMX__)
- p = _getcwd2(cwd, 1022); /* includes drive specifier */
-# else
- p = getcwd(cwd, 1022); /* djggp includes drive specifier */
-# endif
-#endif
-
- if (p == NULL)
- {
- _SLerrno_errno = errno;
- SLang_push_null ();
- return;
- }
-
-#ifndef VMS
-#ifdef __GO32__
- /* You never know about djgpp since it favors unix */
- {
- char ch;
- p = cwd;
- while ((ch = *p) != 0)
- {
- if (ch == '/') *p = '\\';
- p++;
- }
- }
-#endif
- fixup_dir (cwd);
-#endif
- SLang_push_string (cwd);
-}
-
-static int chdir_cmd (char *s)
-{
- int ret;
-
- while (-1 == (ret = chdir (s)))
- {
-#ifdef EINTR
- if (errno == EINTR)
- continue;
-#endif
- _SLerrno_errno = errno;
- break;
- }
- return ret;
-}
-
-#ifdef VMS
-static int remove_cmd (char *);
-/* If the file looks like xxx, then change it to xxx.dir. If
- * it looks like A:[B.xxx] then change it to A:[B]xxx.dir.
- */
-
-static char *vms_convert_dirspec_to_vms_dir (char *str)
-{
- char *s;
- char *version;
- unsigned int len;
- char *dot;
-
- len = strlen (str);
-
- version = strchr (str, ';');
- if (version == NULL)
- version = str + len;
- /* version points to the version of the input string */
-
-
- if (NULL == (s = SLmalloc (len + 8)))/* allow extra space to work with */
- return NULL;
-
- len = (unsigned int) (version - str);
- strncpy (s, str, len);
- s[len] = 0;
- str = s;
-
- /* Lowercase the whole thing */
- while (*s != 0)
- {
- *s = LOWER_CASE(*s);
- s++;
- }
-
- if ((s > str)
- && (s[-1] != ']'))
- {
- if ((s >= str + 4)
- && (0 == strcmp (s - 4, ".dir")))
- s -= 4;
- goto add_dir_version;
- }
-
- /* Check for one of two possibilities:
- *
- * dev:[x] --> dev:x
- * dev:[a.x] --> dev:[a]x
- */
-
- if (NULL == (dot = strchr (str, '.')))
- {
- /* First possibility */
- if (NULL == (s = strchr (str, '[')))
- return str; /* let someone else figure this out */
- while (s[1] != ']')
- {
- s[0] = s[1];
- s++;
- }
- *s = 0;
- goto add_dir_version;
- }
-
- while (NULL != (s = strchr (dot + 1, '.')))
- dot = s;
-
- *dot = ']';
- s = str + (len - 1);
-
- /* Drop */
-
- add_dir_version:
- strcpy (s, ".dir");
- strcpy (s+4, version);
- return str;
-}
-#endif
-
-static int rmdir_cmd (char *s)
-{
-#ifdef VMS
- int status;
-
- if (NULL == (s = vms_convert_dirspec_to_vms_dir (s)))
- return -1;
-
- status = remove_cmd (s);
- SLfree (s);
-
- return status;
-
-#else
- int ret;
-
- while (-1 == (ret = rmdir (s)))
- {
-#ifdef EINTR
- if (errno == EINTR)
- continue;
-#endif
- _SLerrno_errno = errno;
- break;
- }
- return ret;
-#endif
-}
-
-static int remove_cmd (char *s)
-{
- int ret;
-#ifdef VMS
-# define REMOVE delete
-#else
-# ifdef REAL_UNIX_SYSTEM
-# define REMOVE unlink
-# else
-# define REMOVE remove
-# endif
-#endif
-
- while (-1 == (ret = REMOVE (s)))
- {
-#ifdef EINTR
- if (errno == EINTR)
- continue;
-#endif
- _SLerrno_errno = errno;
- break;
- }
- return ret;
-}
-
-static int rename_cmd (char *oldpath, char *newpath)
-{
- int ret;
- while (-1 == (ret = rename (oldpath, newpath)))
- {
-#ifdef EINTR
- if (errno == EINTR)
- continue;
-#endif
- _SLerrno_errno = errno;
- break;
- }
- return ret;
-}
-
-static int mkdir_cmd (char *s, int *mode_ptr)
-{
- int ret;
-
- (void) mode_ptr;
- errno = 0;
-
-#if defined (__MSDOS__) && !defined(__GO32__)
-# define MKDIR(x,y) mkdir(x)
-#else
-# if defined (__os2__) && !defined (__EMX__)
-# define MKDIR(x,y) mkdir(x)
-# else
-# if defined (__WIN32__) && !defined (__CYGWIN32__)
-# define MKDIR(x,y) mkdir(x)
-# else
-# define MKDIR mkdir
-# endif
-# endif
-#endif
-
- while (-1 == (ret = MKDIR(s, *mode_ptr)))
- {
-#ifdef EINTR
- if (errno == EINTR)
- continue;
-#endif
- _SLerrno_errno = errno;
- break;
- }
- return ret;
-}
-
-#ifdef HAVE_MKFIFO
-static int mkfifo_cmd (char *path, int *mode)
-{
- if (-1 == mkfifo (path, *mode))
- {
- _SLerrno_errno = errno;
- return -1;
- }
- return 0;
-}
-#endif
-
-#if USE_LISTDIR_INTRINSIC
-
-static void free_dir_list (char **list, unsigned int num)
-{
- unsigned int i;
-
- if (list == NULL)
- return;
-
- for (i = 0; i < num; i++)
- SLang_free_slstring (list[i]);
- SLfree ((char *) list);
-}
-
-#if defined(__WIN32__) || defined(__os2__) && defined(__IBMC__)
-static int build_dirlist (char *file, char *opt, char ***listp, unsigned int *nump, unsigned int *maxnum)
-{
-# ifdef __WIN32__
- DWORD status;
- HANDLE h;
- WIN32_FIND_DATA fd;
-# else
- APIRET rc;
- FILESTATUS3 status;
- HDIR h;
- FILEFINDBUF3 fd;
- ULONG cFileNames;
-# endif
- char *pat;
- unsigned int len;
- char **list;
- unsigned int num;
- unsigned int max_num;
- int hok;
-
- /* If an option is present, assume ok to list hidden files. Later
- * I will formalize this.
- */
- hok = (opt != NULL);
-
-# ifdef __WIN32__
- status = GetFileAttributes (file);
-# else
- rc = DosQueryPathInfo(file, FIL_STANDARD, &status, sizeof(FILESTATUS3));
-# endif
-
-
-# ifdef __WIN32__
- if (status == (DWORD)-1)
- {
- _SLerrno_errno = ENOENT;
- return -1;
- }
- if (0 == (status & FILE_ATTRIBUTE_DIRECTORY))
- {
- _SLerrno_errno = ENOTDIR;
- return -1;
- }
-# else
- if ((rc != 0) || (status.attrFile & FILE_DIRECTORY) == 0)
- {
- /* ENOTDIR isn't defined in VA3. */
- _SLerrno_errno = ENOENT;
- return -1;
- }
-# endif
-
- len = strlen (file);
- pat = SLmalloc (len + 3);
- if (pat == NULL)
- return -1;
-
- strcpy (pat, file);
- file = pat;
- while (*file != 0)
- {
- if (*file == '/') *file = '\\';
- file++;
- }
-
- if (len && (pat[len-1] != '\\'))
- {
- pat[len] = '\\';
- len++;
- }
- pat[len++] = '*';
- pat[len] = 0;
-
- num = 0;
- max_num = 50;
- list = (char **)SLmalloc (max_num * sizeof(char *));
- if (list == NULL)
- {
- SLfree (pat);
- return -1;
- }
-
-# ifdef __WIN32__
- h = FindFirstFile(pat, &fd);
- if (h == INVALID_HANDLE_VALUE)
- {
- if (ERROR_NO_MORE_FILES != GetLastError())
- {
- SLfree (pat);
- SLfree ((char *)list);
- return -1;
- }
- }
-# else
- h = HDIR_CREATE;
- cFileNames = 1;
- rc = DosFindFirst(pat, &h, FILE_READONLY | FILE_DIRECTORY |
- FILE_ARCHIVED, &fd, sizeof(fd), &cFileNames, FIL_STANDARD);
- if (rc != 0)
- {
- if (rc != ERROR_NO_MORE_FILES)
- {
- SLfree (pat);
- SLfree ((char *)list);
- return -1;
- }
- }
-# endif
- else while (1)
- {
- /* Do not include hidden files in the list. Also, do not
- * include "." and ".." entries.
- */
-#ifdef __WIN32__
- file = fd.cFileName;
-#else
- file = fd.achName;
-#endif
- if (
-#ifdef __WIN32__
- (hok || (0 == (fd.dwFileAttributes & FILE_ATTRIBUTE_HIDDEN)))
-#else
- (hok || (0 == (fd.attrFile & FILE_HIDDEN)))
-#endif
- && ((*file != '.')
- || ((0 != strcmp (file, "."))
- && (0 != strcmp (file, "..")))))
- {
- if (num == max_num)
- {
- char **new_list;
-
- max_num += 100;
- new_list = (char **)SLrealloc ((char *)list, max_num * sizeof (char *));
- if (new_list == NULL)
- goto return_error;
-
- list = new_list;
- }
-
- file = SLang_create_slstring (file);
- if (file == NULL)
- goto return_error;
-
- list[num] = file;
- num++;
- }
-
-#ifdef __WIN32__
- if (FALSE == FindNextFile(h, &fd))
- {
- if (ERROR_NO_MORE_FILES == GetLastError())
- {
- FindClose (h);
- break;
- }
-
- _SLerrno_errno = errno;
- FindClose (h);
- goto return_error;
- }
-#else
- cFileNames = 1;
- rc = DosFindNext(h, &fd, sizeof(fd), &cFileNames);
- if (rc != 0)
- {
- if (rc == ERROR_NO_MORE_FILES)
- {
- DosFindClose (h);
- break;
- }
-
- _SLerrno_errno = errno;
- DosFindClose (h);
- goto return_error;
- }
-#endif
- }
-
- SLfree (pat);
- *maxnum = max_num;
- *nump = num;
- *listp = list;
- return 0;
-
- return_error:
- free_dir_list (list, num);
- SLfree (pat);
- return -1;
-}
-
-#else /* NOT __WIN32__ */
-
-static int build_dirlist (char *dir, char *opt, char ***listp, unsigned int *nump, unsigned int *maxnum)
-{
- DIR *dp;
- struct dirent *ep;
- unsigned int num_files;
- unsigned int max_num_files;
- char **list;
-
- (void) opt;
-
- if (NULL == (dp = opendir (dir)))
- {
- _SLerrno_errno = errno;
- return -1;
- }
-
- num_files = max_num_files = 0;
- list = NULL;
- while (NULL != (ep = readdir (dp)))
- {
- unsigned int len;
- char *name;
-
- name = ep->d_name;
-# ifdef NEED_D_NAMLEN
- len = ep->d_namlen;
-# else
- len = strlen (name);
-# endif
- if ((*name == '.') && (len <= 2))
- {
- if (len == 1) continue;
- if (name [1] == '.') continue;
- }
-
- if (num_files == max_num_files)
- {
- char **new_list;
-
- max_num_files += 100;
- if (NULL == (new_list = (char **) SLrealloc ((char *)list, max_num_files * sizeof(char *))))
- goto return_error;
-
- list = new_list;
- }
-
- if (NULL == (list[num_files] = SLang_create_nslstring (name, len)))
- goto return_error;
-
- num_files++;
- }
-
- closedir (dp);
- *nump = num_files;
- *maxnum = max_num_files;
- *listp = list;
- return 0;
-
- return_error:
- if (dp != NULL)
- closedir (dp);
- free_dir_list (list, num_files);
- return -1;
-}
-# endif /* NOT __WIN32__ */
-
-static void listdir_cmd (char *dir, char *opt)
-{
- SLang_Array_Type *at;
- unsigned int num_files;
- unsigned int max_num_files;
- int inum_files;
- char **list;
-
- if (-1 == build_dirlist (dir, opt, &list, &num_files, &max_num_files))
- {
- SLang_push_null ();
- return;
- }
- /* If max_num_files == 0, then num_files == 0 and list == NULL.
- * The realloc step below will malloc list for us.
- */
- if (num_files + 1 < max_num_files)
- {
- char **new_list;
- if (NULL == (new_list = (char **) SLrealloc ((char *)list, (num_files + 1)* sizeof(char*))))
- {
- free_dir_list (list, num_files);
- SLang_push_null ();
- return;
- }
- list = new_list;
- }
-
- inum_files = (int) num_files;
- if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, (VOID_STAR) list, &inum_files, 1)))
- {
- free_dir_list (list, num_files);
- SLang_push_null ();
- return;
- }
-
- /* Allow the array to free this list if push fails */
- if (-1 == SLang_push_array (at, 1))
- SLang_push_null ();
-}
-
-static void listdir_cmd_wrap (void)
-{
- char *s, *sopt;
-
- sopt = NULL;
- switch (SLang_Num_Function_Args)
- {
- case 2:
- if (-1 == SLang_pop_slstring (&sopt))
- return;
- case 1:
- if (-1 == SLang_pop_slstring (&s))
- {
- SLang_free_slstring (sopt);
- return;
- }
- break;
- default:
- SLang_verror (SL_INVALID_PARM, "usage: listdir (string, [opt-string]");
- return;
- }
-
- listdir_cmd (s, sopt);
- SLang_free_slstring (s);
- SLang_free_slstring (sopt);
-}
-
-#endif /* USE_LISTDIR_INTRINSIC */
-
-#ifdef HAVE_UMASK
-static int umask_cmd (int *u)
-{
- return umask (*u);
-}
-#endif
-
-static SLang_Intrin_Fun_Type PosixDir_Name_Table [] =
-{
-#ifdef HAVE_READLINK
- MAKE_INTRINSIC_S("readlink", readlink_cmd, SLANG_VOID_TYPE),
-#endif
- MAKE_INTRINSIC_S("lstat_file", lstat_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("stat_file", stat_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SI("stat_is", stat_is_cmd, SLANG_CHAR_TYPE),
-#ifdef HAVE_MKFIFO
- MAKE_INTRINSIC_SI("mkfifo", mkfifo_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_CHOWN
- MAKE_INTRINSIC_SII("chown", chown_cmd, SLANG_INT_TYPE),
-#endif
- MAKE_INTRINSIC_SI("chmod", chmod_cmd, SLANG_INT_TYPE),
-#ifdef HAVE_UMASK
- MAKE_INTRINSIC_I("umask", umask_cmd, SLANG_INT_TYPE),
-#endif
- MAKE_INTRINSIC_0("getcwd", slget_cwd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SI("mkdir", mkdir_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_S("chdir", chdir_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_S("rmdir", rmdir_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_S("remove", remove_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_SS("rename", rename_cmd, SLANG_INT_TYPE),
-#if USE_LISTDIR_INTRINSIC
- MAKE_INTRINSIC("listdir", listdir_cmd_wrap, SLANG_VOID_TYPE, 0),
-#endif
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-static SLang_IConstant_Type PosixDir_Consts [] =
-{
-#ifndef S_IRWXU
-# define S_IRWXU 00700
-#endif
- MAKE_ICONSTANT("S_IRWXU", S_IRWXU),
-#ifndef S_IRUSR
-# define S_IRUSR 00400
-#endif
- MAKE_ICONSTANT("S_IRUSR", S_IRUSR),
-#ifndef S_IWUSR
-# define S_IWUSR 00200
-#endif
- MAKE_ICONSTANT("S_IWUSR", S_IWUSR),
-#ifndef S_IXUSR
-# define S_IXUSR 00100
-#endif
- MAKE_ICONSTANT("S_IXUSR", S_IXUSR),
-#ifndef S_IRWXG
-# define S_IRWXG 00070
-#endif
- MAKE_ICONSTANT("S_IRWXG", S_IRWXG),
-#ifndef S_IRGRP
-# define S_IRGRP 00040
-#endif
- MAKE_ICONSTANT("S_IRGRP", S_IRGRP),
-#ifndef S_IWGRP
-# define S_IWGRP 00020
-#endif
- MAKE_ICONSTANT("S_IWGRP", S_IWGRP),
-#ifndef S_IXGRP
-# define S_IXGRP 00010
-#endif
- MAKE_ICONSTANT("S_IXGRP", S_IXGRP),
-#ifndef S_IRWXO
-# define S_IRWXO 00007
-#endif
- MAKE_ICONSTANT("S_IRWXO", S_IRWXO),
-#ifndef S_IROTH
-# define S_IROTH 00004
-#endif
- MAKE_ICONSTANT("S_IROTH", S_IROTH),
-#ifndef S_IWOTH
-# define S_IWOTH 00002
-#endif
- MAKE_ICONSTANT("S_IWOTH", S_IWOTH),
-#ifndef S_IXOTH
-# define S_IXOTH 00001
-#endif
- MAKE_ICONSTANT("S_IXOTH", S_IXOTH),
-#ifdef __WIN32__
- MAKE_ICONSTANT("FILE_ATTRIBUTE_ARCHIVE", FILE_ATTRIBUTE_ARCHIVE),
- MAKE_ICONSTANT("FILE_ATTRIBUTE_COMPRESSED", FILE_ATTRIBUTE_COMPRESSED),
- MAKE_ICONSTANT("FILE_ATTRIBUTE_NORMAL", FILE_ATTRIBUTE_NORMAL),
- MAKE_ICONSTANT("FILE_ATTRIBUTE_DIRECTORY", FILE_ATTRIBUTE_DIRECTORY),
- MAKE_ICONSTANT("FILE_ATTRIBUTE_HIDDEN", FILE_ATTRIBUTE_HIDDEN),
- MAKE_ICONSTANT("FILE_ATTRIBUTE_READONLY", FILE_ATTRIBUTE_READONLY),
- MAKE_ICONSTANT("FILE_ATTRIBUTE_SYSTEM", FILE_ATTRIBUTE_SYSTEM),
- MAKE_ICONSTANT("FILE_ATTRIBUTE_TEMPORARY", FILE_ATTRIBUTE_TEMPORARY),
-#endif
- SLANG_END_ICONST_TABLE
-};
-
-static int Initialized;
-
-int SLang_init_posix_dir (void)
-{
- if (Initialized)
- return 0;
-
- if ((-1 == SLadd_intrin_fun_table(PosixDir_Name_Table, "__POSIX_DIR__"))
- || (-1 == SLadd_iconstant_table (PosixDir_Consts, NULL))
- || (-1 == _SLerrno_init ()))
- return -1;
-
- Initialized = 1;
-
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slposio.c b/mdk-stage1/slang/slposio.c
deleted file mode 100644
index ab1e9f689..000000000
--- a/mdk-stage1/slang/slposio.c
+++ /dev/null
@@ -1,568 +0,0 @@
-/* This module implements an interface to posix system calls */
-/* file stdio intrinsics for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if defined(__unix__) || (defined (__os2__) && defined (__EMX__))
-# include <sys/types.h>
-#endif
-
-#ifdef HAVE_FCNTL_H
-# include <fcntl.h>
-#endif
-#ifdef HAVE_SYS_FCNTL_H
-# include <sys/fcntl.h>
-#endif
-
-#ifdef __unix__
-# include <sys/file.h>
-#endif
-
-#ifdef HAVE_IO_H
-# include <io.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <dir.h>
-#endif
-
-#if defined(__DECC) && defined(VMS)
-# include <unixio.h>
-# include <unixlib.h>
-#endif
-
-#ifdef VMS
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-struct _SLFile_FD_Type
-{
- char *name;
- unsigned int num_refs; /* reference counting */
- int fd;
- SLang_MMT_Type *stdio_mmt; /* fdopen'd stdio object */
-
- /* methods */
- int (*close)(int);
- int (*read) (int, char *, unsigned int *);
- int (*write)(int, char *, unsigned int *);
-};
-
-static int close_method (int fd)
-{
- return close (fd);
-}
-
-static int write_method (int fd, char *buf, unsigned int *nump)
-{
- int num;
-
- if (-1 == (num = write (fd, buf, *nump)))
- {
- *nump = 0;
- return -1;
- }
-
- *nump = (unsigned int) num;
- return 0;
-}
-
-static int read_method (int fd, char *buf, unsigned int *nump)
-{
- int num;
-
- num = read (fd, buf, *nump);
- if (num == -1)
- {
- *nump = 0;
- return -1;
- }
- *nump = (unsigned int) num;
- return 0;
-}
-
-static int check_fd (int fd)
-{
- if (fd == -1)
- {
-#ifdef EBADF
- _SLerrno_errno = EBADF;
-#endif
- return -1;
- }
-
- return 0;
-}
-
-static int posix_close (SLFile_FD_Type *f)
-{
- if (-1 == check_fd (f->fd))
- return -1;
-
- if ((f->close != NULL)
- && (-1 == f->close (f->fd)))
- {
- _SLerrno_errno = errno;
- return -1;
- }
-
- if (f->stdio_mmt != NULL)
- {
- SLang_free_mmt (f->stdio_mmt);
- f->stdio_mmt = NULL;
- }
-
- f->fd = -1;
- return 0;
-}
-
-/* Usage: Uint write (f, buf); */
-static void posix_write (SLFile_FD_Type *f, SLang_BString_Type *bstr)
-{
- unsigned int len;
- char *p;
-
- if ((-1 == check_fd (f->fd))
- || (NULL == (p = (char *)SLbstring_get_pointer (bstr, &len))))
- {
- SLang_push_integer (-1);
- return;
- }
-
- if (-1 == f->write (f->fd, p, &len))
- {
- _SLerrno_errno = errno;
- SLang_push_integer (-1);
- return;
- }
-
- (void) SLang_push_uinteger (len);
-}
-
-/* Usage: nn = read (f, &buf, n); */
-static void posix_read (SLFile_FD_Type *f, SLang_Ref_Type *ref, unsigned int *nbytes)
-{
- unsigned int len;
- char *b;
- SLang_BString_Type *bstr;
-
- b = NULL;
-
- len = *nbytes;
- if ((-1 == check_fd (f->fd))
- || (NULL == (b = SLmalloc (len + 1))))
- goto return_error;
-
- if (-1 == f->read (f->fd, b, &len))
- {
- _SLerrno_errno = errno;
- goto return_error;
- }
-
- if (len != *nbytes)
- {
- char *b1 = SLrealloc (b, len + 1);
- if (b1 == NULL)
- goto return_error;
- b = b1;
- }
-
- bstr = SLbstring_create_malloced ((unsigned char *) b, len, 0);
- if (bstr != NULL)
- {
- if ((-1 != SLang_assign_to_ref (ref, SLANG_BSTRING_TYPE, (VOID_STAR)&bstr))
- && (-1 != SLang_push_uinteger (len)))
- return;
-
- SLbstring_free (bstr);
- b = NULL;
- /* drop */
- }
-
- return_error:
- if (b != NULL) SLfree ((char *)b);
- (void) SLang_assign_to_ref (ref, SLANG_NULL_TYPE, NULL);
- (void) SLang_push_integer (-1);
-}
-
-SLFile_FD_Type *SLfile_create_fd (char *name, int fd)
-{
- SLFile_FD_Type *f;
-
- if (NULL == (f = (SLFile_FD_Type *) SLmalloc (sizeof (SLFile_FD_Type))))
- return NULL;
-
- memset ((char *) f, 0, sizeof (SLFile_FD_Type));
- if (NULL == (f->name = SLang_create_slstring (name)))
- {
- SLfree ((char *)f);
- return NULL;
- }
-
- f->fd = fd;
- f->num_refs = 1;
-
- f->close = close_method;
- f->read = read_method;
- f->write = write_method;
-
- return f;
-}
-
-SLFile_FD_Type *SLfile_dup_fd (SLFile_FD_Type *f0)
-{
- SLFile_FD_Type *f;
- int fd0, fd;
-
- if (f0 == NULL)
- return NULL;
- fd0 = f0->fd;
- if (-1 == check_fd (fd0))
- return NULL;
-
- while (-1 == (fd = dup (fd0)))
- {
-#ifdef EINTR
- if (errno == EINTR)
- continue;
-#endif
- _SLerrno_errno = errno;
- return NULL;
- }
-
- if (NULL == (f = SLfile_create_fd (f0->name, fd)))
- {
- f0->close (fd);
- return NULL;
- }
-
- return f;
-}
-
-int SLfile_get_fd (SLFile_FD_Type *f, int *fd)
-{
- if (f == NULL)
- return -1;
-
- *fd = f->fd;
- if (-1 == check_fd (*fd))
- return -1;
-
- return 0;
-}
-
-void SLfile_free_fd (SLFile_FD_Type *f)
-{
- if (f == NULL)
- return;
-
- if (f->num_refs > 1)
- {
- f->num_refs -= 1;
- return;
- }
-
- if (f->fd != -1)
- {
- if (f->close != NULL)
- (void) f->close (f->fd);
-
- f->fd = -1;
- }
-
- if (f->stdio_mmt != NULL)
- SLang_free_mmt (f->stdio_mmt);
-
- SLfree ((char *) f);
-}
-
-static int pop_string_int (char **s, int *i)
-{
- *s = NULL;
- if ((-1 == SLang_pop_integer (i))
- || (-1 == SLang_pop_slstring (s)))
- return -1;
-
- return 0;
-}
-
-static int pop_string_int_int (char **s, int *a, int *b)
-{
- *s = NULL;
- if ((-1 == SLang_pop_integer (b))
- || (-1 == pop_string_int (s, a)))
- return -1;
-
- return 0;
-}
-
-static void posix_open (void)
-{
- char *file;
- int mode, flags;
- SLFile_FD_Type *f;
-
- switch (SLang_Num_Function_Args)
- {
- case 3:
- if (-1 == pop_string_int_int (&file, &flags, &mode))
- {
- SLang_push_null ();
- return;
- }
- break;
-
- case 2:
- default:
- if (-1 == pop_string_int (&file, &flags))
- return;
- mode = 0777;
- break;
- }
-
- f = SLfile_create_fd (file, -1);
- if (f == NULL)
- {
- SLang_free_slstring (file);
- SLang_push_null ();
- return;
- }
- SLang_free_slstring (file);
-
- if (-1 == (f->fd = open (f->name, flags, mode)))
- {
- _SLerrno_errno = errno;
- SLfile_free_fd (f);
- SLang_push_null ();
- return;
- }
-
- if (-1 == SLfile_push_fd (f))
- SLang_push_null ();
- SLfile_free_fd (f);
-}
-
-static void posix_fileno (void)
-{
- FILE *fp;
- SLang_MMT_Type *mmt;
- int fd;
- SLFile_FD_Type *f;
- char *name;
-
- if (-1 == SLang_pop_fileptr (&mmt, &fp))
- {
- SLang_push_null ();
- return;
- }
- name = SLang_get_name_from_fileptr (mmt);
- fd = fileno (fp);
-
- f = SLfile_create_fd (name, fd);
- if (f != NULL)
- f->close = NULL; /* prevent fd from being closed
- * when it goes out of scope
- */
- SLang_free_mmt (mmt);
-
- if (-1 == SLfile_push_fd (f))
- SLang_push_null ();
- SLfile_free_fd (f);
-}
-
-static void posix_fdopen (SLFile_FD_Type *f, char *mode)
-{
- if (f->stdio_mmt == NULL)
- {
- if (-1 == _SLstdio_fdopen (f->name, f->fd, mode))
- return;
-
- if (NULL == (f->stdio_mmt = SLang_pop_mmt (SLANG_FILE_PTR_TYPE)))
- return;
- }
-
- (void) SLang_push_mmt (f->stdio_mmt);
-}
-
-static long posix_lseek (SLFile_FD_Type *f, long ofs, int whence)
-{
- long status;
-
- if (-1 == (status = lseek (f->fd, ofs, whence)))
- _SLerrno_errno = errno;
-
- return status;
-}
-
-static int posix_isatty (void)
-{
- int ret;
- SLFile_FD_Type *f;
-
- if (SLang_peek_at_stack () == SLANG_FILE_PTR_TYPE)
- {
- SLang_MMT_Type *mmt;
- FILE *fp;
-
- if (-1 == SLang_pop_fileptr (&mmt, &fp))
- return 0; /* invalid descriptor */
-
- ret = isatty (fileno (fp));
- SLang_free_mmt (mmt);
- return ret;
- }
-
- if (-1 == SLfile_pop_fd (&f))
- return 0;
-
- ret = isatty (f->fd);
- SLfile_free_fd (f);
-
- return ret;
-}
-
-static void posix_dup (SLFile_FD_Type *f)
-{
- if ((NULL == (f = SLfile_dup_fd (f)))
- || (-1 == SLfile_push_fd (f)))
- SLang_push_null ();
-
- SLfile_free_fd (f);
-}
-
-#define I SLANG_INT_TYPE
-#define V SLANG_VOID_TYPE
-#define F SLANG_FILE_FD_TYPE
-#define B SLANG_BSTRING_TYPE
-#define R SLANG_REF_TYPE
-#define U SLANG_UINT_TYPE
-#define S SLANG_STRING_TYPE
-#define L SLANG_LONG_TYPE
-static SLang_Intrin_Fun_Type Fd_Name_Table [] =
-{
- MAKE_INTRINSIC_0("fileno", posix_fileno, V),
- MAKE_INTRINSIC_0("isatty", posix_isatty, I),
- MAKE_INTRINSIC_0("open", posix_open, V),
- MAKE_INTRINSIC_3("read", posix_read, V, F, R, U),
- MAKE_INTRINSIC_3("lseek", posix_lseek, L, F, L, I),
- MAKE_INTRINSIC_2("fdopen", posix_fdopen, V, F, S),
- MAKE_INTRINSIC_2("write", posix_write, V, F, B),
- MAKE_INTRINSIC_1("dup_fd", posix_dup, V, F),
- MAKE_INTRINSIC_1("close", posix_close, I, F),
- SLANG_END_INTRIN_FUN_TABLE
-};
-#undef I
-#undef V
-#undef F
-#undef B
-#undef R
-#undef S
-#undef L
-#undef U
-
-static SLang_IConstant_Type PosixIO_Consts [] =
-{
-#ifdef O_RDONLY
- MAKE_ICONSTANT("O_RDONLY", O_RDONLY),
-#endif
-#ifdef O_WRONLY
- MAKE_ICONSTANT("O_WRONLY", O_WRONLY),
-#endif
-#ifdef O_RDWR
- MAKE_ICONSTANT("O_RDWR", O_RDWR),
-#endif
-#ifdef O_APPEND
- MAKE_ICONSTANT("O_APPEND", O_APPEND),
-#endif
-#ifdef O_CREAT
- MAKE_ICONSTANT("O_CREAT", O_CREAT),
-#endif
-#ifdef O_EXCL
- MAKE_ICONSTANT("O_EXCL", O_EXCL),
-#endif
-#ifdef O_NOCTTY
- MAKE_ICONSTANT("O_NOCTTY", O_NOCTTY),
-#endif
-#ifdef O_NONBLOCK
- MAKE_ICONSTANT("O_NONBLOCK", O_NONBLOCK),
-#endif
-#ifdef O_TRUNC
- MAKE_ICONSTANT("O_TRUNC", O_TRUNC),
-#endif
-#ifndef O_BINARY
-# define O_BINARY 0
-#endif
- MAKE_ICONSTANT("O_BINARY", O_BINARY),
-#ifndef O_TEXT
-# define O_TEXT 0
-#endif
- MAKE_ICONSTANT("O_TEXT", O_TEXT),
-
- SLANG_END_ICONST_TABLE
-};
-
-int SLfile_push_fd (SLFile_FD_Type *f)
-{
- if (f == NULL)
- return SLang_push_null ();
-
- f->num_refs += 1;
-
- if (0 == SLclass_push_ptr_obj (SLANG_FILE_FD_TYPE, (VOID_STAR) f))
- return 0;
-
- f->num_refs -= 1;
-
- return -1;
-}
-
-int SLfile_pop_fd (SLFile_FD_Type **f)
-{
- return SLclass_pop_ptr_obj (SLANG_FILE_FD_TYPE, (VOID_STAR *) f);
-}
-
-static void destroy_fd_type (unsigned char type, VOID_STAR ptr)
-{
- (void) type;
- SLfile_free_fd (*(SLFile_FD_Type **) ptr);
-}
-
-static int fd_push (unsigned char type, VOID_STAR v)
-{
- (void) type;
- return SLfile_push_fd (*(SLFile_FD_Type **)v);
-}
-
-int SLang_init_posix_io (void)
-{
- SLang_Class_Type *cl;
-
- if (NULL == (cl = SLclass_allocate_class ("FD_Type")))
- return -1;
- cl->cl_destroy = destroy_fd_type;
- (void) SLclass_set_push_function (cl, fd_push);
-
- if (-1 == SLclass_register_class (cl, SLANG_FILE_FD_TYPE, sizeof (SLFile_FD_Type), SLANG_CLASS_TYPE_PTR))
- return -1;
-
- if ((-1 == SLadd_intrin_fun_table(Fd_Name_Table, "__POSIXIO__"))
- || (-1 == SLadd_iconstant_table (PosixIO_Consts, NULL))
- || (-1 == _SLerrno_init ()))
- return -1;
-
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slprepr.c b/mdk-stage1/slang/slprepr.c
deleted file mode 100644
index 358eeb874..000000000
--- a/mdk-stage1/slang/slprepr.c
+++ /dev/null
@@ -1,427 +0,0 @@
-/* Copyright (c) 1996, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/*--------------------------------*-C-*---------------------------------*
- * File: slprepr.c
- *
- * preprocessing routines
- */
-/*{{{ notes: */
-/*
- * various preprocessing tokens supported
- *
- * #ifdef TOKEN1 TOKEN2 ...
- * - True if any of TOKEN1 TOKEN2 ... are defined
- *
- * #ifndef TOKEN1 TOKEN2 ...
- * - True if none of TOKEN1 TOKEN2 ... are defined
- *
- * #iftrue
- * #ifnfalse
- * - always True
- *
- * #iffalse
- * #ifntrue
- * - always False
- *
- * #if$ENV
- * - True if the enviroment variable ENV is set
- *
- * #ifn$ENV
- * - True if the enviroment variable ENV is not set
- *
- * #if$ENV TOKEN1 TOKEN2 ...
- * - True if the contents of enviroment variable ENV match
- * any of TOKEN1 TOKEN2 ...
- *
- * #ifn$ENV TOKEN1 TOKEN2 ...
- * - True if the contents of enviroment variable ENV do not match
- * any of TOKEN1 TOKEN2 ...
- *
- * NB: For $ENV, the tokens may contain wildcard characters:
- * '?' - match any single character
- * '*' - match any number of characters
- *
- * #elif...
- * #else
- * #endif
- *
- *
- * mj olesen
- *----------------------------------------------------------------------*/
-/*}}}*/
-/*{{{ includes: */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-/*}}}*/
-
-int (*SLprep_exists_hook) (char *, char);
-int (*_SLprep_eval_hook) (char *);
-
-/*{{{ SLprep_open_prep (), SLprep_close_prep () */
-int SLprep_open_prep (SLPreprocess_Type *pt)
-{
- pt->this_level = 0;
- pt->exec_level = 0;
- pt->prev_exec_level = 0;
- pt->comment_char = '%';
- pt->preprocess_char = '#';
- pt->flags = 0;
- return 0;
-}
-
-void SLprep_close_prep (SLPreprocess_Type *pt)
-{
- (void) pt;
-}
-/*}}}*/
-
-/*{{{ SLwildcard () */
-/*----------------------------------------------------------------------*
- * Does `string' match `pattern' ?
- *
- * '*' in pattern matches any sub-string (including the null string)
- * '?' matches any single char.
- *
- * Code taken from that donated by Paul Hudson <paulh@harlequin.co.uk>
- * to the fvwm project.
- * It is public domain, no strings attached. No guarantees either.
- *----------------------------------------------------------------------*/
-static int SLwildcard (char *pattern, char *string)
-{
- if (pattern == NULL || *pattern == '\0' || !strcmp (pattern, "*"))
- return 1;
- else if (string == NULL)
- return 0;
-
- while (*pattern && *string) switch (*pattern)
- {
- case '?':
- /* match any single character */
- pattern++;
- string++;
- break;
-
- case '*':
- /* see if rest of pattern matches any trailing */
- /* substring of the string. */
- if (*++pattern == '\0')
- return 1; /* trailing * must match rest */
-
- while (*string)
- {
- if (SLwildcard (pattern, string)) return 1;
- string++;
- }
- return 0;
-
- /* break; */
-
- default:
- if (*pattern == '\\')
- {
- if (*++pattern == '\0')
- pattern--; /* don't skip trailing backslash */
- }
- if (*pattern++ != *string++) return 0;
- break;
- }
-
- return ((*string == '\0')
- && ((*pattern == '\0') || !strcmp (pattern, "*")));
-}
-/*}}}*/
-
-#if defined(__16_BIT_SYSTEM__)
-# define MAX_DEFINES 10
-#else
-# define MAX_DEFINES 128
-#endif
-
-/* The extra one is for NULL termination */
-char *_SLdefines [MAX_DEFINES + 1];
-
-int SLdefine_for_ifdef (char *s) /*{{{*/
-{
- unsigned int i;
-
- for (i = 0; i < MAX_DEFINES; i++)
- {
- char *s1 = _SLdefines [i];
-
- if (s1 == s)
- return 0; /* already defined (hashed string) */
-
- if (s1 != NULL)
- continue;
-
- s = SLang_create_slstring (s);
- if (s == NULL)
- return -1;
-
- _SLdefines[i] = s;
- return 0;
- }
- return -1;
-}
-/*}}}*/
-
-/*{{{ static functions */
-static int is_any_defined(char *buf, char comment) /*{{{*/
-{
- char *sys;
- unsigned int i;
-
- while (1)
- {
- register char ch;
-
- /* Skip whitespace */
- while (((ch = *buf) == ' ') || (ch == '\t'))
- buf++;
-
- if ((ch == '\n') || (ch == 0) || (ch == comment))
- return 0;
-
- i = 0;
- while (NULL != (sys = _SLdefines [i++]))
- {
- unsigned int n;
-
- if (*sys != ch)
- continue;
-
- n = strlen (sys);
- if (0 == strncmp (buf, sys, n))
- {
- char ch1 = *(buf + n);
-
- if ((ch1 == '\n') || (ch1 == 0) ||
- (ch1 == ' ') || (ch1 == '\t') || (ch1 == comment))
- return 1;
- }
- }
-
- /* Skip past word */
- while (((ch = *buf) != ' ')
- && (ch != '\n')
- && (ch != 0)
- && (ch != '\t')
- && (ch != comment))
- buf++;
- }
-}
-/*}}}*/
-
-static unsigned char *tokenize (unsigned char *buf, char *token, unsigned int len)
-{
- register char *token_end;
-
- token_end = token + (len - 1); /* allow room for \0 */
-
- while ((token < token_end) && (*buf > ' '))
- *token++ = *buf++;
-
- if (*buf > ' ') return NULL; /* token too long */
-
- *token = '\0';
-
- while ((*buf == ' ') || (*buf == '\t')) buf++;
-
- return buf;
-}
-
-static int is_env_defined (char *buf, char comment) /*{{{*/
-{
- char * env, token [32];
-
- if ((*buf <= ' ') || (*buf == comment)) return 0; /* no token */
-
- if (NULL == (buf = (char *) tokenize ((unsigned char *) buf,
- token, sizeof (token))))
- return 0;
-
- if (NULL == (env = getenv (token)))
- return 0; /* ENV not defined */
-
- if ((*buf == '\0') || (*buf == '\n') || (*buf == comment))
- return 1; /* no tokens, but getenv() worked */
-
- do
- {
- buf = (char *) tokenize ((unsigned char *) buf, token, sizeof (token));
- if (buf == NULL) return 0;
-
- if (SLwildcard (token, env))
- return 1;
- }
- while (*buf && (*buf != '\n') && (*buf != comment));
-
- return 0;
-}
-/*}}}*/
-/*}}}*/
-
-int SLprep_line_ok (char *buf, SLPreprocess_Type *pt) /*{{{*/
-{
- int level, prev_exec_level, exec_level;
-
- if ((buf == NULL) || (pt == NULL)) return 1;
-
- if (*buf != pt->preprocess_char)
- {
- if (pt->this_level != pt->exec_level)
- return 0;
-
- if (*buf == '\n') return pt->flags & SLPREP_BLANK_LINES_OK;
- if (*buf == pt->comment_char) return pt->flags & SLPREP_COMMENT_LINES_OK;
-
- return 1;
- }
-
- level = pt->this_level;
- exec_level = pt->exec_level;
- prev_exec_level = pt->prev_exec_level;
-
- buf++;
-
- /* Allow '#!' to pass. This could be a shell script with something
- like '#! /local/bin/slang' */
- if ((*buf == '!') && (pt->preprocess_char == '#'))
- return 0;
-
- /* Allow whitespace as in '# ifdef' */
- while ((*buf == ' ') || (*buf == '\t')) buf++;
- if (*buf < 'a') return (level == exec_level);
-
- if (!strncmp(buf, "endif", 5))
- {
- if (level == exec_level)
- {
- exec_level--;
- prev_exec_level = exec_level;
- }
- level--;
- if (level < prev_exec_level) prev_exec_level = level;
- goto done;
- }
-
- if ((buf[0] == 'e') && (buf[1] == 'l')) /* else, elifdef, ... */
- {
- if ((level == exec_level + 1)
- && (prev_exec_level != level))
- {
- /* We are in position to execute */
- buf += 2;
- if ((buf[0] == 's') && (buf[1] == 'e'))
- {
- /* "else" */
- exec_level = level;
- goto done;
- }
-
- /* drop through to ifdef testing. First set variable
- * to values appropriate for ifdef testing.
- */
- level--; /* now == to exec level */
- }
- else
- {
- if (level == exec_level)
- {
- exec_level--;
- }
- goto done;
- }
- }
-
- if ((buf[0] == 'i') && (buf[1] == 'f'))
- {
- int truth;
-
- if (level != exec_level)
- {
- /* Not interested */
- level++;
- goto done;
- }
-
- level++;
-
- buf += 2;
- if (buf[0] == 'n')
- {
- truth = 0;
- buf++;
- }
- else truth = 1;
-
- if (!strncmp (buf, "def", 3))
- truth = (truth == is_any_defined(buf + 3, pt->comment_char));
-
- else if (!strncmp (buf, "false", 5))
- truth = !truth;
-
- else if (*buf == '$')
- truth = (truth == is_env_defined (buf + 1, pt->comment_char));
-
- else if (!strncmp (buf, "exists", 6)
- && (SLprep_exists_hook != NULL))
- truth = (truth == (*SLprep_exists_hook)(buf + 6, pt->comment_char));
-
- else if (!strncmp (buf, "eval", 4)
- && (_SLprep_eval_hook != NULL))
- truth = (truth == (*_SLprep_eval_hook) (buf + 4));
-
- else if (0 != strncmp (buf, "true", 4))
- return 1; /* let it bomb */
-
- if (truth)
- {
- exec_level = level;
- prev_exec_level = exec_level;
- }
- }
- else return 1; /* let it bomb. */
-
- done:
-
- if (exec_level < 0) return 1;
-
- pt->this_level = level;
- pt->exec_level = exec_level;
- pt->prev_exec_level = prev_exec_level;
- return 0;
-}
-/*}}}*/
-
-/*{{{ main() - for testing only */
-#if 0
-int main ()
-{
- char buf[1024];
- SLPreprocess_Type pt;
-
- SLprep_open_prep (&pt);
-
- SLdefine_for_ifdef ("UNIX");
-
- while (NULL != fgets (buf, sizeof (buf) - 1, stdin))
- {
- if (SLprep_line_ok (buf, &pt))
- {
- fputs (buf, stdout);
- }
- }
-
- SLprep_close_prep (&pt);
- return 0;
-}
-#endif
-/*}}}*/
diff --git a/mdk-stage1/slang/slproc.c b/mdk-stage1/slang/slproc.c
deleted file mode 100644
index 8b266f28f..000000000
--- a/mdk-stage1/slang/slproc.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* Process specific system calls */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#ifdef HAVE_IO_H
-# include <io.h> /* for chmod */
-#endif
-
-#ifdef HAVE_PROCESS_H
-# include <process.h> /* for getpid */
-#endif
-
-#if defined(__BORLANDC__)
-# include <dos.h>
-#endif
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <time.h>
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef HAVE_KILL
-static int kill_cmd (int *pid, int *sig)
-{
- int ret;
-
- if (-1 == (ret = kill ((pid_t) *pid, *sig)))
- _SLerrno_errno = errno;
- return ret;
-}
-#endif
-
-static int getpid_cmd (void)
-{
- return getpid ();
-}
-
-#ifdef HAVE_GETPPID
-static int getppid_cmd (void)
-{
- return getppid ();
-}
-#endif
-
-#ifdef HAVE_GETGID
-static int getgid_cmd (void)
-{
- return getgid ();
-}
-#endif
-
-#ifdef HAVE_GETEGID
-static int getegid_cmd (void)
-{
- return getegid ();
-}
-#endif
-
-#ifdef HAVE_GETEUID
-static int geteuid_cmd (void)
-{
- return geteuid ();
-}
-#endif
-
-#ifdef HAVE_GETUID
-static int getuid_cmd (void)
-{
- return getuid ();
-}
-#endif
-
-#ifdef HAVE_SETGID
-static int setgid_cmd (int *gid)
-{
- if (0 == setgid (*gid))
- return 0;
- _SLerrno_errno = errno;
- return -1;
-}
-#endif
-
-#ifdef HAVE_SETPGID
-static int setpgid_cmd (int *pid, int *pgid)
-{
- if (0 == setpgid (*pid, *pgid))
- return 0;
- _SLerrno_errno = errno;
- return -1;
-}
-#endif
-
-#ifdef HAVE_SETUID
-static int setuid_cmd (int *uid)
-{
- if (0 == setuid (*uid))
- return 0;
- _SLerrno_errno = errno;
- return -1;
-}
-#endif
-
-static SLang_Intrin_Fun_Type Process_Name_Table[] =
-{
- MAKE_INTRINSIC_0("getpid", getpid_cmd, SLANG_INT_TYPE),
-
-#ifdef HAVE_GETPPID
- MAKE_INTRINSIC_0("getppid", getppid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETGID
- MAKE_INTRINSIC_0("getgid", getgid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETEGID
- MAKE_INTRINSIC_0("getegid", getegid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETEUID
- MAKE_INTRINSIC_0("geteuid", geteuid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETUID
- MAKE_INTRINSIC_0("getuid", getuid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_SETGID
- MAKE_INTRINSIC_I("setgid", setgid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_SETPGID
- MAKE_INTRINSIC_II("setpgid", setpgid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_SETUID
- MAKE_INTRINSIC_I("setuid", setuid_cmd, SLANG_INT_TYPE),
-#endif
-
-#ifdef HAVE_KILL
- MAKE_INTRINSIC_II("kill", kill_cmd, SLANG_INT_TYPE),
-#endif
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_posix_process (void)
-{
- if ((-1 == SLadd_intrin_fun_table (Process_Name_Table, "__POSIX_PROCESS__"))
- || (-1 == _SLerrno_init ()))
- return -1;
- return 0;
-}
diff --git a/mdk-stage1/slang/slregexp.c b/mdk-stage1/slang/slregexp.c
deleted file mode 100644
index 6592a5a63..000000000
--- a/mdk-stage1/slang/slregexp.c
+++ /dev/null
@@ -1,935 +0,0 @@
-/* ed style regular expressions */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define SET_BIT(b, n) b[(unsigned int) (n) >> 3] |= 1 << ((unsigned int) (n) % 8)
-#define TEST_BIT(b, n) (b[(unsigned int)(n) >> 3] & (1 << ((unsigned int) (n) % 8)))
-#define LITERAL 1
-#define RANGE 2 /* [...] */
-#define ANY 3 /* . */
-#define BOL 4 /* ^ */
-#define EOL 5 /* $ */
-#define NTH_MATCH 6 /* \1 \2 ... \9 */
-#define OPAREN 7 /* \( */
-#define CPAREN 0x8 /* \) */
-#define ANY_DIGIT 0x9 /* \d */
-#define BOW 0xA /* \< */
-#define EOW 0xB /* \> */
-#if 0
-#define NOT_LITERAL 0xC /* \~ */
-#endif
-#define STAR 0x80 /* * */
-#define LEAST_ONCE 0x40 /* + */
-#define MAYBE_ONCE 0x20 /* ? */
-#define MANY 0x10 /* {n,m} */
-/* The rest are additions */
-#define YES_CASE (STAR | BOL)
-#define NO_CASE (STAR | EOL)
-
-#define UPPERCASE(x) (cs ? (x) : UPPER_CASE(x))
-#define LOWERCASE(x) (cs ? (x) : LOWER_CASE(x))
-
-static unsigned char Word_Chars[256];
-#define IS_WORD_CHAR(x) Word_Chars[(unsigned int) (x)]
-
-#if 0
-static int ctx->open_paren_number;
-static char Closed_Paren_Matches[10];
-
-static SLRegexp_Type *This_Reg;
-static unsigned char *This_Str;
-#endif
-
-typedef struct
-{
- SLRegexp_Type *reg;
- unsigned char *str;
- unsigned int len;
- char closed_paren_matches[10];
- int open_paren_number;
-}
-Re_Context_Type;
-
-static unsigned char *do_nth_match (Re_Context_Type *ctx, int n, unsigned char *str, unsigned char *estr)
-{
- unsigned char *bpos;
-
- if (ctx->closed_paren_matches[n] == 0)
- return NULL;
-
- bpos = ctx->reg->beg_matches[n] + ctx->str;
- n = ctx->reg->end_matches[n];
- if (n == 0) return(str);
- if (n > (int) (estr - str)) return (NULL);
-
- /* This needs fixed for case sensitive match */
- if (0 != strncmp((char *) str, (char *) bpos, (unsigned int) n)) return (NULL);
- str += n;
- return (str);
-}
-
-/* returns pointer to the end of regexp or NULL */
-static unsigned char *regexp_looking_at (Re_Context_Type *ctx, register unsigned char *str, unsigned char *estr, unsigned char *buf, register int cs)
-{
- register unsigned char p, p1;
- unsigned char *save_str, *tmpstr;
- int n, n0, n1;
- int save_num_open;
- char save_closed_matches[10];
-
- p = *buf++;
-
- while (p != 0)
- {
- /* p1 = UPPERCASE(*buf); */
- /* if (str < estr) c = UPPERCASE(*str); */
-
- switch((unsigned char) p)
- {
- case BOW:
- if ((str != ctx->str)
- && ((str >= estr)
- || IS_WORD_CHAR(*(str - 1))
- || (0 == IS_WORD_CHAR(*str)))) return NULL;
- break;
-
- case EOW:
- if ((str < estr)
- && IS_WORD_CHAR (*str)) return NULL;
- break;
-
- case YES_CASE: cs = 1; break;
- case NO_CASE: cs = 0; break;
-
- case OPAREN:
- ctx->open_paren_number++;
- ctx->reg->beg_matches[ctx->open_paren_number] = (int) (str - ctx->str);
- break;
- case CPAREN:
- n = ctx->open_paren_number;
- while (n > 0)
- {
- if (ctx->closed_paren_matches[n] != 0)
- {
- n--;
- continue;
- }
- ctx->closed_paren_matches[n] = 1;
- ctx->reg->end_matches[n] = (unsigned int) (str - (ctx->str + ctx->reg->beg_matches[n]));
- break;
- }
- break;
-#ifdef NOT_LITERAL
- case NOT_LITERAL:
- if ((str >= estr) || (*buf == UPPERCASE(*str))) return (NULL);
- str++; buf++;
- break;
-
- case MAYBE_ONCE | NOT_LITERAL:
- save_str = str;
- if ((str < estr) && (*buf != UPPERCASE(*str))) str++;
- buf++;
- goto match_rest;
-
- case NOT_LITERAL | LEAST_ONCE: /* match at least once */
- if ((str >= estr) || (UPPERCASE(*str) == UPPERCASE(*buf))) return (NULL);
- str++;
- /* drop */
- case STAR | NOT_LITERAL:
- save_str = str; p1 = *buf;
- while ((str < estr) && (UPPERCASE(*str) != p1)) str++;
- buf++;
- goto match_rest;
-
- /* this type consists of the expression + two bytes that
- determine number of matches to perform */
- case MANY | NOT_LITERAL:
- p1 = *buf; buf++;
- n = n0 = (int) (unsigned char) *buf++;
- /* minimum number to match--- could be 0 */
- n1 = (int) (unsigned char) *buf++;
- /* maximum number to match */
-
- while (n && (str < estr) && (p1 != *str))
- {
- n--;
- str++;
- }
- if (n) return (NULL);
-
- save_str = str;
- n = n1 - n0;
- while (n && (str < estr) && (p1 != *str))
- {
- n--;
- str++;
- }
- goto match_rest;
-#endif /* NOT_LITERAL */
- case LITERAL:
- if ((str >= estr) || (*buf != UPPERCASE(*str))) return (NULL);
- str++; buf++;
- break;
-
- case MAYBE_ONCE | LITERAL:
- save_str = str;
- if ((str < estr) && (*buf == UPPERCASE(*str))) str++;
- buf++;
- goto match_rest;
-
- case LITERAL | LEAST_ONCE: /* match at least once */
- if ((str >= estr) || (UPPERCASE(*str) != UPPERCASE(*buf))) return (NULL);
- str++;
- /* drop */
- case STAR | LITERAL:
- save_str = str; p1 = *buf;
- while ((str < estr) && (UPPERCASE(*str) == p1)) str++;
- buf++;
- goto match_rest;
-
- /* this type consists of the expression + two bytes that
- determine number of matches to perform */
- case MANY | LITERAL:
- p1 = *buf; buf++;
- n = n0 = (int) (unsigned char) *buf++;
- /* minimum number to match--- could be 0 */
- n1 = (int) (unsigned char) *buf++;
- /* maximum number to match */
-
- while (n && (str < estr) && (p1 == *str))
- {
- n--;
- str++;
- }
- if (n) return (NULL);
-
- save_str = str;
- n = n1 - n0;
- while (n && (str < estr) && (p1 == *str))
- {
- n--;
- str++;
- }
- goto match_rest;
-
- case NTH_MATCH:
- if ((str = do_nth_match(ctx, (int) (unsigned char) *buf, str, estr)) == NULL) return(NULL);
- buf++;
- break;
-
- case MAYBE_ONCE | NTH_MATCH:
- save_str = str;
- tmpstr = do_nth_match (ctx, (int) (unsigned char) *buf, str, estr);
- buf++;
- if (tmpstr != NULL)
- {
- str = tmpstr;
- goto match_rest;
- }
- continue;
-
- case LEAST_ONCE | NTH_MATCH:
- if ((str = do_nth_match(ctx, (int) (unsigned char) *buf, str, estr)) == NULL) return(NULL);
- /* drop */
- case STAR | NTH_MATCH:
- save_str = str;
- while (NULL != (tmpstr = do_nth_match(ctx, (int) (unsigned char) *buf, str, estr)))
- {
- str = tmpstr;
- }
- buf++;
- goto match_rest;
-
- case MANY | NTH_MATCH: return(NULL);
- /* needs done */
-
- case RANGE:
- if (str >= estr) return (NULL);
- if (TEST_BIT(buf, UPPERCASE(*str)) == 0) return (NULL);
- buf += 32; str++;
- break;
-
- case MAYBE_ONCE | RANGE:
- save_str = str;
- if ((str < estr) && TEST_BIT(buf, UPPERCASE(*str))) str++;
- buf += 32;
- goto match_rest;
-
- case LEAST_ONCE | RANGE:
- if ((str >= estr) || (0 == TEST_BIT(buf, UPPERCASE(*str)))) return NULL;
- str++;
- /* drop */
- case STAR | RANGE:
- save_str = str;
- while ((str < estr) && TEST_BIT(buf, UPPERCASE(*str))) str++;
- buf += 32;
- goto match_rest;
-
- /* The first 32 bytes correspond to the range and the two
- * following bytes indicate the min and max number of matches.
- */
- case MANY | RANGE:
- /* minimum number to match--- could be 0 */
- n = n0 = (int) (unsigned char) *(buf + 32);
- /* maximum number to match */
- n1 = (int) (unsigned char) *(buf + 33);
-
- while (n && (str < estr) && (TEST_BIT(buf, UPPERCASE(*str))))
- {
- n--;
- str++;
- }
- if (n) return (NULL);
- save_str = str;
- n = n1 - n0;
- while (n && (str < estr) && (TEST_BIT(buf, UPPERCASE(*str))))
- {
- n--;
- str++;
- }
- buf += 34; /* 32 + 2 */
- goto match_rest;
-
- case ANY_DIGIT:
- if ((str >= estr) || (*str > '9') || (*str < '0')) return (NULL);
- str++;
- break;
-
- case MAYBE_ONCE | ANY_DIGIT:
- save_str = str;
- if ((str < estr) && ((*str > '9') || (*str < '0'))) str++;
- goto match_rest;
-
- case LEAST_ONCE | ANY_DIGIT:
- if ((str >= estr) || ((*str > '9') || (*str < '0'))) return NULL;
- str++;
- /* drop */
- case STAR | ANY_DIGIT:
- save_str = str;
- while ((str < estr) && ((*str <= '9') && (*str >= '0'))) str++;
- goto match_rest;
-
- case MANY | ANY_DIGIT:
- /* needs finished */
- return (NULL);
-
- case ANY:
- if ((str >= estr) || (*str == '\n')) return (NULL);
- str++;
- break;
-
- case MAYBE_ONCE | ANY:
- save_str = str;
- if ((str < estr) && (*str != '\n')) str++;
- goto match_rest;
-
- case LEAST_ONCE | ANY:
- if ((str >= estr) || (*str == '\n')) return (NULL);
- str++;
- /* drop */
- case STAR | ANY:
- save_str = str;
- while ((str < estr) && (*str != '\n')) str++;
- goto match_rest;
-
- case MANY | ANY:
- return (NULL);
- /* needs finished */
-
- case EOL:
- if ((str >= estr) || (*str == '\n')) return (str);
- return(NULL);
-
- default: return (NULL);
- }
- p = *buf++;
- continue;
-
- match_rest:
- if (save_str == str)
- {
- p = *buf++;
- continue;
- }
-
- /* if (p == EOL)
- * {
- * if (str < estr) return (NULL); else return (str);
- * }
- */
-
- SLMEMCPY(save_closed_matches, ctx->closed_paren_matches, sizeof(save_closed_matches));
- save_num_open = ctx->open_paren_number;
- while (str >= save_str)
- {
- tmpstr = regexp_looking_at (ctx, str, estr, buf, cs);
- if (tmpstr != NULL) return(tmpstr);
- SLMEMCPY(ctx->closed_paren_matches, save_closed_matches, sizeof(ctx->closed_paren_matches));
- ctx->open_paren_number = save_num_open;
- str--;
- }
- return NULL;
- }
- if ((p != 0) && (p != EOL)) return (NULL); else return (str);
-}
-
-static void
-fixup_beg_end_matches (Re_Context_Type *ctx, SLRegexp_Type *r, unsigned char *str, unsigned char *epos)
-{
- int i;
-
- if (str == NULL)
- {
- r->beg_matches[0] = -1;
- r->end_matches[0] = 0;
- SLMEMSET(ctx->closed_paren_matches, 0, sizeof(ctx->closed_paren_matches));
- }
- else
- {
- r->beg_matches[0] = (int) (str - ctx->str);
- r->end_matches[0] = (unsigned int) (epos - str);
- }
-
- for (i = 1; i < 10; i++)
- {
- if (ctx->closed_paren_matches [i] == 0)
- {
- r->beg_matches[i] = -1;
- r->end_matches[i] = 0;
- }
- }
-}
-
-static void init_re_context (Re_Context_Type *ctx, SLRegexp_Type *reg,
- unsigned char *str, unsigned int len)
-{
- memset ((char *) ctx, 0, sizeof (Re_Context_Type));
- ctx->reg = reg;
- ctx->str = str;
- ctx->len = len;
-}
-
-unsigned char *SLang_regexp_match(unsigned char *str,
- unsigned int len, SLRegexp_Type *reg)
-{
- register unsigned char c = 0, *estr = str + len;
- int cs = reg->case_sensitive, lit = 0;
- unsigned char *buf = reg->buf, *epos = NULL;
- Re_Context_Type ctx_buf;
-
- if (reg->min_length > len) return NULL;
-
- init_re_context (&ctx_buf, reg, str, len);
-
- if (*buf == BOL)
- {
- if (NULL == (epos = regexp_looking_at (&ctx_buf, str, estr, buf + 1, cs)))
- str = NULL;
-
- fixup_beg_end_matches (&ctx_buf, reg, str, epos);
- return str;
- }
-
- if (*buf == NO_CASE)
- {
- buf++; cs = 0;
- }
-
- if (*buf == YES_CASE)
- {
- buf++; cs = 1;
- }
-
- if (*buf == LITERAL)
- {
- lit = 1;
- c = *(buf + 1);
- }
- else if ((*buf == OPAREN) && (*(buf + 1) == LITERAL))
- {
- lit = 1;
- c = *(buf + 2);
- }
-
- while (str < estr)
- {
- ctx_buf.open_paren_number = 0;
- memset (ctx_buf.closed_paren_matches, 0, sizeof(ctx_buf.closed_paren_matches));
- /* take care of leading chars */
- if (lit)
- {
- while ((str < estr) && (c != UPPERCASE(*str))) str++;
- if (str >= estr)
- break; /* failed */
- }
-
- if (NULL != (epos = regexp_looking_at(&ctx_buf, str, estr, buf, cs)))
- {
- fixup_beg_end_matches (&ctx_buf, reg, str, epos);
- return str;
- }
- str++;
- }
- fixup_beg_end_matches (&ctx_buf, reg, NULL, epos);
- return NULL;
-}
-
-static unsigned char *convert_digit(unsigned char *pat, int *nn)
-{
- int n = 0, m = 0;
- unsigned char c;
- while (c = (unsigned char) *pat, (c <= '9') && (c >= '0'))
- {
- pat++;
- n = 10 * n + (c - '0');
- m++;
- }
- if (m == 0)
- {
- return (NULL);
- }
- *nn = n;
- return pat;
-}
-
-#define ERROR return (int) (pat - reg->pat)
-
-/* Returns 0 if successful or offset in pattern of error */
-int SLang_regexp_compile (SLRegexp_Type *reg)
-{
- register unsigned char *buf, *ebuf, *pat;
- unsigned char *last = NULL, *tmppat;
- register unsigned char c;
- int i, reverse = 0, n, cs;
- int oparen = 0, nparen = 0;
- /* substring stuff */
- int count, last_count, this_max_mm = 0, max_mm = 0, ordinary_search,
- no_osearch = 0, min_length = 0;
- unsigned char *mm_p = NULL, *this_mm_p = NULL;
- static int already_initialized;
-
- reg->beg_matches[0] = reg->end_matches[0] = 0;
- buf = reg->buf;
- ebuf = (reg->buf + reg->buf_len) - 2; /* make some room */
- pat = reg->pat;
- cs = reg->case_sensitive;
-
- if (already_initialized == 0)
- {
- SLang_init_case_tables ();
-#ifdef IBMPC_SYSTEM
- SLmake_lut (Word_Chars, (unsigned char *) "_0-9a-zA-Z\200-\232\240-\245\341-\353", 0);
-#else
- SLmake_lut (Word_Chars, (unsigned char *) "_0-9a-zA-Z\277-\326\330-\336\340-\366\370-\376", 0);
-#endif
- already_initialized = 1;
- }
-
- i = 1; while (i < 10)
- {
- reg->beg_matches[i] = -1;
- reg->end_matches[i] = 0;
- i++;
- }
-
- if (*pat == '\\')
- {
- if (pat[1] == 'c')
- {
- cs = 1;
- pat += 2;
- no_osearch = 1;
- }
- else if (pat[1] == 'C')
- {
- cs = 0;
- pat += 2;
- no_osearch = 1;
- }
- }
-
- if (*pat == '^')
- {
- pat++;
- *buf++ = BOL;
- reg->must_match_bol = 1;
- }
- else reg->must_match_bol = 0;
-
- if (cs != reg->case_sensitive)
- {
- if (cs) *buf++ = YES_CASE;
- else *buf++ = NO_CASE;
- }
-
- *buf = 0;
-
- last_count = count = 0;
- while ((c = *pat++) != 0)
- {
- if (buf >= ebuf - 3)
- {
- SLang_doerror ("Pattern too large to be compiled.");
- ERROR;
- }
-
- count++;
- switch (c)
- {
- case '$':
- if (*pat != 0) goto literal_char;
- *buf++ = EOL;
- break;
-
- case '\\':
- c = *pat++;
- no_osearch = 1;
- switch(c)
- {
- case 'e': c = 033; goto literal_char;
- case 'n': c = '\n'; goto literal_char;
- case 't': c = '\t'; goto literal_char;
- case 'C': cs = 0; *buf++ = NO_CASE; break;
- case 'c': cs = 1; *buf++ = YES_CASE; break;
- case '1': case '2': case '3': case '4': case '5':
- case '6': case '7': case '8': case '9':
- c = c - '0';
- if ((int) c > nparen) ERROR;
- last = buf;
- *buf++ = NTH_MATCH; *buf++ = c;
- break;
-#ifdef NOT_LITERAL
- case '~': /* slang extension */
- if ((c = *pat) == 0) ERROR;
- pat++;
- last = buf;
- *buf++ = NOT_LITERAL;
- *buf++ = c;
- min_length++;
- break;
-#endif
- case 'd': /* slang extension */
- last = buf;
- *buf++ = ANY_DIGIT;
- min_length++;
- break;
-
- case '<':
- last = NULL;
- *buf++ = BOW;
- break;
-
- case '>':
- last = NULL;
- *buf++ = EOW;
- break;
-
- case '{':
- if (last == NULL) goto literal_char;
- *last |= MANY;
- tmppat = convert_digit(pat, &n);
- if (tmppat == NULL) ERROR;
- pat = tmppat;
- *buf++ = n;
-
- min_length += (n - 1);
-
- if (*pat == '\\')
- {
- *buf++ = n;
- }
- else if (*pat == ',')
- {
- pat++;
- if (*pat == '\\')
- {
- n = 255;
- }
- else
- {
- tmppat = convert_digit(pat, &n);
- if (tmppat == NULL) ERROR;
- pat = tmppat;
- if (*pat != '\\') ERROR;
- }
- *buf++ = n;
- }
- else ERROR;
- last = NULL;
- pat++;
- if (*pat != '}') ERROR;
- pat++;
- break; /* case '{' */
-
- case '(':
- oparen++;
- if (oparen > 9) ERROR;
- *buf++ = OPAREN;
- break;
- case ')':
- if (oparen == 0) ERROR;
- oparen--;
- nparen++;
- *buf++ = CPAREN;
- break;
-
- case 0: ERROR;
- default:
- goto literal_char;
- }
- break;
-
- case '[':
-
- *buf = RANGE;
- last = buf++;
-
- if (buf + 32 >= ebuf) ERROR;
-
- for (i = 0; i < 32; i++) buf[i] = 0;
- c = *pat++;
- if (c == '^')
- {
- reverse = 1;
- SET_BIT(buf, '\n');
- c = *pat++;
- }
-
- if (c == ']')
- {
- SET_BIT(buf, c);
- c = *pat++;
- }
- while (c && (c != ']'))
- {
- if (c == '\\')
- {
- c = *pat++;
- switch(c)
- {
- case 'n': c = '\n'; break;
- case 't': c = '\t'; break;
- case 0: ERROR;
- }
- }
-
- if (*pat == '-')
- {
- pat++;
- while (c < *pat)
- {
- if (cs == 0)
- {
- SET_BIT(buf, UPPERCASE(c));
- SET_BIT(buf, LOWERCASE(c));
- }
- else SET_BIT(buf, c);
- c++;
- }
- }
- if (cs == 0)
- {
- SET_BIT(buf, UPPERCASE(c));
- SET_BIT(buf, LOWERCASE(c));
- }
- else SET_BIT(buf, c);
- c = *pat++;
- }
- if (c != ']') ERROR;
- if (reverse) for (i = 0; i < 32; i++) buf[i] = buf[i] ^ 0xFF;
- reverse = 0;
- buf += 32;
- min_length++;
- break;
-
- case '.':
- last = buf;
- *buf++ = ANY;
- min_length++;
- break;
-
- case '*':
- if (last == NULL) goto literal_char;
- *last |= STAR;
- min_length--;
- last = NULL;
- break;
-
- case '+':
- if (last == NULL) goto literal_char;
- *last |= LEAST_ONCE;
- last = NULL;
- break;
-
- case '?':
- if (last == NULL) goto literal_char;
- *last |= MAYBE_ONCE;
- last = NULL;
- min_length--;
- break;
-
- literal_char:
- default:
- /* This is to keep track of longest substring */
- min_length++;
- this_max_mm++;
- if (last_count + 1 == count)
- {
- if (this_max_mm == 1)
- {
- this_mm_p = buf;
- }
- else if (max_mm < this_max_mm)
- {
- mm_p = this_mm_p;
- max_mm = this_max_mm;
- }
- }
- else
- {
- this_mm_p = buf;
- this_max_mm = 1;
- }
-
- last_count = count;
-
- last = buf;
- *buf++ = LITERAL;
- *buf++ = UPPERCASE(c);
- }
- }
- *buf = 0;
- /* Check for ordinary search */
- ebuf = buf;
- buf = reg->buf;
-
- if (no_osearch) ordinary_search = 0;
- else
- {
- ordinary_search = 1;
- while (buf < ebuf)
- {
- if (*buf != LITERAL)
- {
- ordinary_search = 0;
- break;
- }
- buf += 2;
- }
- }
-
- reg->osearch = ordinary_search;
- reg->must_match_str[15] = 0;
- reg->min_length = (min_length > 0) ? (unsigned int) min_length : 0;
- if (ordinary_search)
- {
- strncpy((char *) reg->must_match_str, (char *) reg->pat, 15);
- reg->must_match = 1;
- return(0);
- }
- /* check for longest substring of pattern */
- reg->must_match = 0;
- if ((mm_p == NULL) && (this_mm_p != NULL)) mm_p = this_mm_p;
- if (mm_p == NULL)
- {
- return (0);
- }
- n = 15;
- pat = reg->must_match_str;
- buf = mm_p;
- while (n--)
- {
- if (*buf++ != LITERAL) break;
- *pat++ = *buf++;
- }
- *pat = 0;
- if (pat != reg->must_match_str) reg->must_match = 1;
- return(0);
-}
-
-char *SLregexp_quote_string (char *re, char *buf, unsigned int buflen)
-{
- char ch;
- char *b, *bmax;
-
- if (re == NULL) return NULL;
-
- b = buf;
- bmax = buf + buflen;
-
- while (b < bmax)
- {
- switch (ch = *re++)
- {
- case 0:
- *b = 0;
- return buf;
-
- case '$':
- case '\\':
- case '[':
- case ']':
- case '.':
- case '^':
- case '*':
- case '+':
- case '?':
- *b++ = '\\';
- if (b == bmax) break;
- /* drop */
-
- default:
- *b++ = ch;
- }
- }
- return NULL;
-}
-
-#if 0
-#define MAX_EXP 4096
-int main(int argc, char **argv)
-{
- FILE *fp;
- char *regexp, *file;
- char expbuf[MAX_EXP], buf[512];
- SLRegexp_Type reg;
-
- file = argv[2];
- regexp = argv[1];
-
- if (NULL == (fp = fopen(file, "r")))
- {
- fprintf(stderr, "File not open\n");
- return(1);
- }
-
- reg.buf = expbuf;
- reg.buf_len = MAX_EXP;
- reg.pat = regexp;
- reg.case_sensitive = 1;
-
- if (!regexp_compile(&reg)) while (NULL != fgets(buf, 511, fp))
- {
- if (reg.osearch)
- {
- if (NULL == strstr(buf, reg.pat)) continue;
- }
- else
- {
- if (reg.must_match && (NULL == strstr(buf, reg.must_match_str))) continue;
- if (0 == regexp_match(buf, buf + strlen(buf), &reg)) continue;
- }
-
- fputs(buf, stdout);
- }
- return (0);
-}
-#endif
diff --git a/mdk-stage1/slang/slrline.c b/mdk-stage1/slang/slrline.c
deleted file mode 100644
index 1874be0bb..000000000
--- a/mdk-stage1/slang/slrline.c
+++ /dev/null
@@ -1,836 +0,0 @@
-/* SLang_read_line interface --- uses SLang tty stuff */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef REAL_UNIX_SYSTEM
-int SLang_RL_EOF_Char = 4;
-#else
-int SLang_RL_EOF_Char = 26;
-#endif
-
-int SLang_Rline_Quit;
-static SLang_RLine_Info_Type *This_RLI;
-
-static unsigned char Char_Widths[256];
-static void position_cursor (int);
-
-static void rl_beep (void)
-{
- putc(7, stdout);
- fflush (stdout);
-}
-
-/* editing functions */
-static int rl_bol (void)
-{
- if (This_RLI->point == 0) return 0;
- This_RLI->point = 0;
- return 1;
-}
-
-static int rl_eol (void)
-{
- if (This_RLI->point == This_RLI->len) return 0;
- This_RLI->point = This_RLI->len;
- return 1;
-}
-
-static int rl_right (void)
-{
- if (This_RLI->point == This_RLI->len) return 0;
- This_RLI->point++;
- return 1;
-}
-
-static int rl_left (void)
-{
- if (This_RLI->point == 0) return 0;
- This_RLI->point--;
- return 1;
-}
-
-static int rl_self_insert (void)
-{
- unsigned char *pmin, *p;
-
- if (This_RLI->len == This_RLI->buf_len)
- {
- rl_beep ();
- return 0;
- }
-
- pmin = This_RLI->buf + This_RLI->point;
- p = This_RLI->buf + This_RLI->len;
- while (p > pmin)
- {
- *p = *(p - 1);
- p--;
- }
- *pmin = SLang_Last_Key_Char;
-
- This_RLI->len++;
- This_RLI->point++;
- if ((This_RLI->curs_pos + 2 >= This_RLI->edit_width)
- || (This_RLI->tt_insert == NULL)
- || (Char_Widths[SLang_Last_Key_Char] != 1)) return 1;
-
- (*This_RLI->tt_insert)((char) SLang_Last_Key_Char);
- /* update screen buf */
- p = This_RLI->old_upd + (This_RLI->len - 1);
- pmin = This_RLI->old_upd + (This_RLI->point - 1);
- while (p > pmin)
- {
- *p = *(p - 1);
- p--;
- }
- *pmin = SLang_Last_Key_Char;
- return 0;
-}
-
-int SLang_rline_insert (char *s)
-{
- unsigned char *pmin, *p;
- int n;
-
- n = strlen (s);
- if (n > This_RLI->buf_len - This_RLI->len)
- n = This_RLI->buf_len - This_RLI->len;
-
- if (n == 0) return 0;
-
- pmin = This_RLI->buf + This_RLI->point;
- p = This_RLI->buf + (This_RLI->len - 1);
-
- while (p >= pmin)
- {
- *(p + n) = *p;
- p--;
- }
- SLMEMCPY ((char *) pmin, s, n);
-
- This_RLI->len += n;
- This_RLI->point += n;
- return n;
-}
-
-static int rl_deln (int n)
-{
- unsigned char *pmax, *p;
-
- p = This_RLI->buf + This_RLI->point;
- pmax = This_RLI->buf + This_RLI->len;
-
- if (p + n > pmax) n = (int) (pmax - p);
- while (p < pmax)
- {
- *p = *(p + n);
- p++;
- }
- This_RLI->len -= n;
- return n;
-}
-
-static int rl_del (void)
-{
- return rl_deln(1);
-}
-
-static int rl_quote_insert (void)
-{
- int err = SLang_Error;
- SLang_Error = 0;
- SLang_Last_Key_Char = (*This_RLI->getkey)();
- rl_self_insert ();
- if (SLang_Error == SL_USER_BREAK) SLang_Error = 0;
- else SLang_Error = err;
- return 1;
-}
-
-static int rl_trim (void)
-{
- unsigned char *p, *pmax, *p1;
- p = This_RLI->buf + This_RLI->point;
- pmax = This_RLI->buf + This_RLI->len;
-
- if (p == pmax)
- {
- if (p == This_RLI->buf) return 0;
- p--;
- }
-
- if ((*p != ' ') && (*p != '\t')) return 0;
- p1 = p;
- while ((p1 < pmax) && ((*p1 == ' ') || (*p1 == '\t'))) p1++;
- pmax = p1;
- p1 = This_RLI->buf;
-
- while ((p >= p1) && ((*p == ' ') || (*p == '\t'))) p--;
- if (p == pmax) return 0;
- p++;
-
- This_RLI->point = (int) (p - p1);
- return rl_deln ((int) (pmax - p));
-}
-
-static int rl_bdel (void)
-{
- if (rl_left()) return rl_del();
- return 0;
-}
-
-static int rl_deleol (void)
-{
- if (This_RLI->point == This_RLI->len) return 0;
- *(This_RLI->buf + This_RLI->point) = 0;
- This_RLI->len = This_RLI->point;
- return 1;
-}
-
-static int rl_delete_line (void)
-{
- This_RLI->point = 0;
- *(This_RLI->buf + This_RLI->point) = 0;
- This_RLI->len = 0;
- return 1;
-}
-
-static int rl_enter (void)
-{
- *(This_RLI->buf + This_RLI->len) = 0;
- SLang_Rline_Quit = 1;
- return 1;
-}
-
-static SLKeyMap_List_Type *RL_Keymap;
-
-/* This update is designed for dumb terminals. It assumes only that the
- * terminal can backspace via ^H, and move cursor to start of line via ^M.
- * There is a hook so the user can provide a more sophisticated update if
- * necessary.
- */
-
-static void position_cursor (int col)
-{
- unsigned char *p, *pmax;
- int dc;
-
- if (col == This_RLI->curs_pos)
- {
- fflush (stdout);
- return;
- }
-
- if (This_RLI->tt_goto_column != NULL)
- {
- (*This_RLI->tt_goto_column)(col);
- This_RLI->curs_pos = col;
- fflush (stdout);
- return;
- }
-
- dc = This_RLI->curs_pos - col;
- if (dc < 0)
- {
- p = This_RLI->new_upd + This_RLI->curs_pos;
- pmax = This_RLI->new_upd + col;
- while (p < pmax) putc((char) *p++, stdout);
- }
- else
- {
- if (dc < col)
- {
- while (dc--) putc(8, stdout);
- }
- else
- {
- putc('\r', stdout);
- p = This_RLI->new_upd;
- pmax = This_RLI->new_upd + col;
- while (p < pmax) putc((char) *p++, stdout);
- }
- }
- This_RLI->curs_pos = col;
- fflush (stdout);
-}
-
-static void erase_eol (SLang_RLine_Info_Type *rli)
-{
- unsigned char *p, *pmax;
-
- p = rli->old_upd + rli->curs_pos;
- pmax = rli->old_upd + rli->old_upd_len;
-
- while (p++ < pmax) putc(' ', stdout);
-
- rli->curs_pos = rli->old_upd_len;
-}
-
-static unsigned char *spit_out(SLang_RLine_Info_Type *rli, unsigned char *p)
-{
- unsigned char *pmax;
- position_cursor ((int) (p - rli->new_upd));
- pmax = rli->new_upd + rli->new_upd_len;
- while (p < pmax) putc((char) *p++, stdout);
- rli->curs_pos = rli->new_upd_len;
- return pmax;
-}
-
-static void really_update (SLang_RLine_Info_Type *rli, int new_curs_position)
-{
- unsigned char *b = rli->old_upd, *p = rli->new_upd, chb, chp;
- unsigned char *pmax;
-
- if (rli->update_hook != NULL)
- {
- (*rli->update_hook)(p, rli->edit_width, new_curs_position);
- }
- else
- {
- pmax = p + rli->edit_width;
- while (p < pmax)
- {
- chb = *b++; chp = *p++;
- if (chb == chp) continue;
-
- if (rli->old_upd_len <= rli->new_upd_len)
- {
- /* easy one */
- (void) spit_out (rli, p - 1);
- break;
- }
- spit_out(rli, p - 1);
- erase_eol (rli);
- break;
- }
- position_cursor (new_curs_position);
- }
-
- /* update finished, so swap */
-
- rli->old_upd_len = rli->new_upd_len;
- p = rli->old_upd;
- rli->old_upd = rli->new_upd;
- rli->new_upd = p;
-}
-
-static void RLupdate (SLang_RLine_Info_Type *rli)
-{
- int len, dlen, start_len = 0, prompt_len = 0, tw = 0, count;
- int want_cursor_pos;
- unsigned char *b, chb, *b_point, *p;
- int no_echo;
-
- no_echo = rli->flags & SL_RLINE_NO_ECHO;
-
- b_point = (unsigned char *) (rli->buf + rli->point);
- *(rli->buf + rli->len) = 0;
-
- /* expand characters for output buffer --- handle prompt first.
- * Do two passes --- first to find out where to begin upon horiz
- * scroll and the second to actually fill the buffer. */
- len = 0;
- count = 2; /* once for prompt and once for buf */
-
- b = (unsigned char *) rli->prompt;
- while (count--)
- {
- if ((count == 0) && no_echo)
- break;
-
- /* The prompt could be NULL */
- if (b != NULL) while ((chb = *b) != 0)
- {
- /* This will ensure that the screen is scrolled a third of the edit
- * width each time */
- if (b_point == b) break;
- dlen = Char_Widths[chb];
- if ((chb == '\t') && tw)
- {
- dlen = tw * ((len - prompt_len) / tw + 1) - (len - prompt_len);
- }
- len += dlen;
- b++;
- }
- tw = rli->tab;
- b = (unsigned char *) rli->buf;
- if (count == 1) want_cursor_pos = prompt_len = len;
- }
-
- if (len < rli->edit_width - rli->dhscroll) start_len = 0;
- else if ((rli->start_column > len)
- || (rli->start_column + rli->edit_width <= len))
- {
- start_len = len - (rli->edit_width - rli->dhscroll);
- if (start_len < 0) start_len = 0;
- }
- else start_len = rli->start_column;
- rli->start_column = start_len;
-
- want_cursor_pos = len - start_len;
-
- /* second pass */
- p = rli->new_upd;
-
- len = 0;
- count = 2;
- b = (unsigned char *) rli->prompt;
- if (b == NULL) b = (unsigned char *) "";
-
- while ((len < start_len) && (*b))
- {
- len += Char_Widths[*b++];
- }
-
- tw = 0;
- if (*b == 0)
- {
- b = (unsigned char *) rli->buf;
- while (len < start_len)
- {
- len += Char_Widths[*b++];
- }
- tw = rli->tab;
- count--;
- }
-
- len = 0;
- while (count--)
- {
- if ((count == 0) && (no_echo))
- break;
-
- while ((len < rli->edit_width) && ((chb = *b++) != 0))
- {
- dlen = Char_Widths[chb];
- if (dlen == 1) *p++ = chb;
- else
- {
- if ((chb == '\t') && tw)
- {
- dlen = tw * ((len + start_len - prompt_len) / tw + 1) - (len + start_len - prompt_len);
- len += dlen; /* ok since dlen comes out 0 */
- if (len > rli->edit_width) dlen = len - rli->edit_width;
- while (dlen--) *p++ = ' ';
- dlen = 0;
- }
- else
- {
- if (dlen == 3)
- {
- chb &= 0x7F;
- *p++ = '~';
- }
-
- *p++ = '^';
- if (chb == 127) *p++ = '?';
- else *p++ = chb + '@';
- }
- }
- len += dlen;
- }
- /* if (start_len > prompt_len) break; */
- tw = rli->tab;
- b = (unsigned char *) rli->buf;
- }
-
- rli->new_upd_len = (int) (p - rli->new_upd);
- while (p < rli->new_upd + rli->edit_width) *p++ = ' ';
- really_update (rli, want_cursor_pos);
-}
-
-void SLrline_redraw (SLang_RLine_Info_Type *rli)
-{
- unsigned char *p = rli->new_upd;
- unsigned char *pmax = p + rli->edit_width;
- while (p < pmax) *p++ = ' ';
- rli->new_upd_len = rli->edit_width;
- really_update (rli, 0);
- RLupdate (rli);
-}
-
-static int rl_eof_insert (void)
-{
- if (This_RLI->len == 0)
- {
- SLang_Last_Key_Char = SLang_RL_EOF_Char;
- /* rl_self_insert (); */
- return rl_enter ();
- }
- return 0;
-}
-
-/* This is very naive. It knows very little about nesting and nothing
- * about quoting.
- */
-static void blink_match (SLang_RLine_Info_Type *rli)
-{
- unsigned char bra, ket;
- unsigned int delta_column;
- unsigned char *p, *pmin;
- int dq_level, sq_level;
- int level;
-
- pmin = rli->buf;
- p = pmin + rli->point;
- if (pmin == p)
- return;
-
- ket = SLang_Last_Key_Char;
- switch (ket)
- {
- case ')':
- bra = '(';
- break;
- case ']':
- bra = '[';
- break;
- case '}':
- bra = '{';
- break;
- default:
- return;
- }
-
- level = 0;
- sq_level = dq_level = 0;
-
- delta_column = 0;
- while (p > pmin)
- {
- char ch;
-
- p--;
- delta_column++;
- ch = *p;
-
- if (ch == ket)
- {
- if ((dq_level == 0) && (sq_level == 0))
- level++;
- }
- else if (ch == bra)
- {
- if ((dq_level != 0) || (sq_level != 0))
- continue;
-
- level--;
- if (level == 0)
- {
- rli->point -= delta_column;
- RLupdate (rli);
- (*rli->input_pending)(10);
- rli->point += delta_column;
- RLupdate (rli);
- break;
- }
- if (level < 0)
- break;
- }
- else if (ch == '"') dq_level = !dq_level;
- else if (ch == '\'') sq_level = !sq_level;
- }
-}
-
-int SLang_read_line (SLang_RLine_Info_Type *rli)
-{
- unsigned char *p, *pmax;
- SLang_Key_Type *key;
-
- SLang_Rline_Quit = 0;
- This_RLI = rli;
- p = rli->old_upd; pmax = p + rli->edit_width;
- while (p < pmax) *p++ = ' ';
-
- /* Sanity checking */
- rli->len = strlen ((char *) rli->buf);
- if (rli->len >= rli->buf_len)
- {
- rli->len = 0;
- *rli->buf = 0;
- }
- if (rli->point > rli->len) rli->point = rli->len;
- if (rli->point < 0) rli->point = 0;
-
- rli->curs_pos = rli->start_column = 0;
- rli->new_upd_len = rli->old_upd_len = 0;
-
- This_RLI->last_fun = NULL;
- if (rli->update_hook == NULL)
- putc ('\r', stdout);
-
- RLupdate (rli);
-
- while (1)
- {
- key = SLang_do_key (RL_Keymap, (int (*)(void)) rli->getkey);
-
- if ((key == NULL) || (key->f.f == NULL))
- rl_beep ();
- else
- {
- if ((SLang_Last_Key_Char == SLang_RL_EOF_Char)
- && (*key->str == 2)
- && (This_RLI->len == 0))
- rl_eof_insert ();
- else if (key->type == SLKEY_F_INTRINSIC)
- {
- if ((key->f.f)())
- RLupdate (rli);
-
- if ((rli->flags & SL_RLINE_BLINK_MATCH)
- && (rli->input_pending != NULL))
- blink_match (rli);
- }
-
- if (SLang_Rline_Quit)
- {
- This_RLI->buf[This_RLI->len] = 0;
- if (SLang_Error == SL_USER_BREAK)
- {
- SLang_Error = 0;
- return -1;
- }
- return This_RLI->len;
- }
- }
- if (key != NULL)
- This_RLI->last_fun = key->f.f;
- }
-}
-
-static int rl_abort (void)
-{
- rl_delete_line ();
- return rl_enter ();
-}
-
-/* TTY interface --- ANSI */
-
-static void ansi_goto_column (int n)
-{
- putc('\r', stdout);
- if (n) fprintf(stdout, "\033[%dC", n);
-}
-
-static void rl_select_line (SLang_Read_Line_Type *p)
-{
- This_RLI->last = p;
- strcpy ((char *) This_RLI->buf, (char *) p->buf);
- This_RLI->point = This_RLI->len = strlen((char *) p->buf);
-}
-static int rl_next_line (void);
-static int rl_prev_line (void)
-{
- SLang_Read_Line_Type *prev;
-
- if (((This_RLI->last_fun != (FVOID_STAR) rl_prev_line)
- && (This_RLI->last_fun != (FVOID_STAR) rl_next_line))
- || (This_RLI->last == NULL))
- {
- prev = This_RLI->tail;
- }
- else prev = This_RLI->last->prev;
-
- if (prev == NULL)
- {
- rl_beep ();
- return 0;
- }
-
- rl_select_line (prev);
- return 1;
-}
-static int rl_redraw (void)
-{
- SLrline_redraw (This_RLI);
- return 1;
-}
-
-static int rl_next_line (void)
-{
- SLang_Read_Line_Type *next;
-
- if (((This_RLI->last_fun != (FVOID_STAR) rl_prev_line)
- && (This_RLI->last_fun != (FVOID_STAR) rl_next_line))
- || (This_RLI->last == NULL))
- {
- rl_beep ();
- return 0;
- }
-
- next = This_RLI->last->next;
-
- if (next == NULL)
- {
- This_RLI->len = This_RLI->point = 0;
- *This_RLI->buf = 0;
- This_RLI->last = NULL;
- }
- else rl_select_line (next);
- return 1;
-}
-
-static SLKeymap_Function_Type SLReadLine_Functions[] =
-{
- {"up", rl_prev_line},
- {"down", rl_next_line},
- {"bol", rl_bol},
- {"eol", rl_eol},
- {"right", rl_right},
- {"left", rl_left},
- {"self_insert", rl_self_insert},
- {"bdel", rl_bdel},
- {"del", rl_del},
- {"deleol", rl_deleol},
- {"enter", rl_enter},
- {"trim", rl_trim},
- {"quoted_insert", rl_quote_insert},
- {(char *) NULL, NULL}
-};
-
-int SLang_init_readline (SLang_RLine_Info_Type *rli)
-{
- int ch;
- char simple[2];
-
- if (RL_Keymap == NULL)
- {
- simple[1] = 0;
- if (NULL == (RL_Keymap = SLang_create_keymap ("ReadLine", NULL)))
- return -1;
-
- RL_Keymap->functions = SLReadLine_Functions;
-
- /* This breaks under some DEC ALPHA compilers (scary!) */
-#ifndef __DECC
- for (ch = ' '; ch < 256; ch++)
- {
- simple[0] = (char) ch;
- SLkm_define_key (simple, (FVOID_STAR) rl_self_insert, RL_Keymap);
- }
-#else
- ch = ' ';
- while (1)
- {
- simple[0] = (char) ch;
- SLkm_define_key (simple, (FVOID_STAR) rl_self_insert, RL_Keymap);
- ch = ch + 1;
- if (ch == 256) break;
- }
-#endif /* NOT __DECC */
-
- simple[0] = SLang_Abort_Char;
- SLkm_define_key (simple, (FVOID_STAR) rl_abort, RL_Keymap);
- simple[0] = SLang_RL_EOF_Char;
- SLkm_define_key (simple, (FVOID_STAR) rl_eof_insert, RL_Keymap);
-
-#ifndef IBMPC_SYSTEM
- SLkm_define_key ("^[[A", (FVOID_STAR) rl_prev_line, RL_Keymap);
- SLkm_define_key ("^[[B", (FVOID_STAR) rl_next_line, RL_Keymap);
- SLkm_define_key ("^[[C", (FVOID_STAR) rl_right, RL_Keymap);
- SLkm_define_key ("^[[D", (FVOID_STAR) rl_left, RL_Keymap);
- SLkm_define_key ("^[OA", (FVOID_STAR) rl_prev_line, RL_Keymap);
- SLkm_define_key ("^[OB", (FVOID_STAR) rl_next_line, RL_Keymap);
- SLkm_define_key ("^[OC", (FVOID_STAR) rl_right, RL_Keymap);
- SLkm_define_key ("^[OD", (FVOID_STAR) rl_left, RL_Keymap);
-#else
- SLkm_define_key ("^@H", (FVOID_STAR) rl_prev_line, RL_Keymap);
- SLkm_define_key ("^@P", (FVOID_STAR) rl_next_line, RL_Keymap);
- SLkm_define_key ("^@M", (FVOID_STAR) rl_right, RL_Keymap);
- SLkm_define_key ("^@K", (FVOID_STAR) rl_left, RL_Keymap);
- SLkm_define_key ("^@S", (FVOID_STAR) rl_del, RL_Keymap);
- SLkm_define_key ("^@O", (FVOID_STAR) rl_eol, RL_Keymap);
- SLkm_define_key ("^@G", (FVOID_STAR) rl_bol, RL_Keymap);
-
- SLkm_define_key ("\xE0H", (FVOID_STAR) rl_prev_line, RL_Keymap);
- SLkm_define_key ("\xE0P", (FVOID_STAR) rl_next_line, RL_Keymap);
- SLkm_define_key ("\xE0M", (FVOID_STAR) rl_right, RL_Keymap);
- SLkm_define_key ("\xE0K", (FVOID_STAR) rl_left, RL_Keymap);
- SLkm_define_key ("\xE0S", (FVOID_STAR) rl_del, RL_Keymap);
- SLkm_define_key ("\xE0O", (FVOID_STAR) rl_eol, RL_Keymap);
- SLkm_define_key ("\xE0G", (FVOID_STAR) rl_bol, RL_Keymap);
-#endif
- SLkm_define_key ("^C", (FVOID_STAR) rl_abort, RL_Keymap);
- SLkm_define_key ("^E", (FVOID_STAR) rl_eol, RL_Keymap);
- SLkm_define_key ("^G", (FVOID_STAR) rl_abort, RL_Keymap);
- SLkm_define_key ("^I", (FVOID_STAR) rl_self_insert, RL_Keymap);
- SLkm_define_key ("^A", (FVOID_STAR) rl_bol, RL_Keymap);
- SLkm_define_key ("\r", (FVOID_STAR) rl_enter, RL_Keymap);
- SLkm_define_key ("\n", (FVOID_STAR) rl_enter, RL_Keymap);
- SLkm_define_key ("^K", (FVOID_STAR) rl_deleol, RL_Keymap);
- SLkm_define_key ("^L", (FVOID_STAR) rl_deleol, RL_Keymap);
- SLkm_define_key ("^V", (FVOID_STAR) rl_del, RL_Keymap);
- SLkm_define_key ("^D", (FVOID_STAR) rl_del, RL_Keymap);
- SLkm_define_key ("^F", (FVOID_STAR) rl_right, RL_Keymap);
- SLkm_define_key ("^B", (FVOID_STAR) rl_left, RL_Keymap);
- SLkm_define_key ("^?", (FVOID_STAR) rl_bdel, RL_Keymap);
- SLkm_define_key ("^H", (FVOID_STAR) rl_bdel, RL_Keymap);
- SLkm_define_key ("^P", (FVOID_STAR) rl_prev_line, RL_Keymap);
- SLkm_define_key ("^N", (FVOID_STAR) rl_next_line, RL_Keymap);
- SLkm_define_key ("^R", (FVOID_STAR) rl_redraw, RL_Keymap);
- SLkm_define_key ("`", (FVOID_STAR) rl_quote_insert, RL_Keymap);
- SLkm_define_key ("\033\\", (FVOID_STAR) rl_trim, RL_Keymap);
- if (SLang_Error) return -1;
- }
-
- if (rli->prompt == NULL) rli->prompt = "";
- if (rli->keymap == NULL) rli->keymap = RL_Keymap;
- rli->old_upd = rli->upd_buf1;
- rli->new_upd = rli->upd_buf2;
- *rli->buf = 0;
- rli->point = 0;
-
- if (rli->flags & SL_RLINE_USE_ANSI)
- {
- if (rli->tt_goto_column == NULL) rli->tt_goto_column = ansi_goto_column;
- }
-
- if (Char_Widths[0] == 2) return 0;
-
- for (ch = 0; ch < 32; ch++) Char_Widths[ch] = 2;
- for (ch = 32; ch < 256; ch++) Char_Widths[ch] = 1;
- Char_Widths[127] = 2;
-#ifndef IBMPC_SYSTEM
- for (ch = 128; ch < 160; ch++) Char_Widths[ch] = 3;
-#endif
-
- return 0;
-}
-
-SLang_Read_Line_Type *SLang_rline_save_line (SLang_RLine_Info_Type *rli)
-{
- SLang_Read_Line_Type *rl = NULL;
- unsigned char *buf;
-
- if ((rli == NULL) || (rli->buf == NULL))
- return NULL;
-
- if (NULL == (rl = (SLang_Read_Line_Type *) SLmalloc (sizeof (SLang_Read_Line_Type)))
- || (NULL == (buf = (unsigned char *) SLmake_string ((char *)rli->buf))))
- {
- SLfree ((char *)rl);
- return NULL;
- }
- rl->buf = buf;
- rl->buf_len = strlen ((char *)buf);
- rl->num = rl->misc = 0;
- rl->next = rl->prev = NULL;
-
- if (rli->tail != NULL)
- {
- rli->tail->next = rl;
- rl->prev = rli->tail;
- }
- rli->tail = rl;
-
- return rl;
-}
diff --git a/mdk-stage1/slang/slscanf.c b/mdk-stage1/slang/slscanf.c
deleted file mode 100644
index 5bd93ff41..000000000
--- a/mdk-stage1/slang/slscanf.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/* sscanf function for S-Lang */
-/* Copyright (c) 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-#include <ctype.h>
-#include <math.h>
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-static char *skip_whitespace (char *s)
-{
- while (isspace (*s))
- s++;
-
- return s;
-}
-
-static void init_map (unsigned char map[256], int base)
-{
- memset ((char *) map, 0xFF, 256);
-
- map['0'] = 0; map['1'] = 1; map['2'] = 2; map['3'] = 3;
- map['4'] = 4; map['5'] = 5; map['6'] = 6; map['7'] = 7;
- if (base == 8)
- return;
-
- map['8'] = 8; map['9'] = 9;
- if (base == 10)
- return;
-
- map['A'] = 10; map['B'] = 11; map['C'] = 12; map['D'] = 13;
- map['E'] = 14; map['F'] = 15; map['a'] = 10; map['b'] = 11;
- map['c'] = 12; map['d'] = 13; map['e'] = 14; map['f'] = 15;
-}
-
-static char *get_sign (char *s, char *smax, int *sign)
-{
- *sign = 1;
- if (s + 1 < smax)
- {
- if (*s == '+') s++;
- else if (*s == '-')
- {
- s++;
- *sign = -1;
- }
- }
- return s;
-}
-
-
-static int parse_long (char **sp, char *smax, long *np,
- long base, unsigned char map[256])
-{
- char *s, *s0;
- long n;
- int sign;
-
- s = s0 = get_sign (*sp, smax, &sign);
-
- n = 0;
- while (s < smax)
- {
- unsigned char value;
-
- value = map [(unsigned char) *s];
- if (value == 0xFF)
- break;
-
- n = base * n + value;
- s++;
- }
-
- *sp = s;
- if (s == s0)
- return 0;
-
- *np = n * sign;
-
- return 1;
-}
-
-
-static int parse_int (char **sp, char *smax, int *np,
- long base, unsigned char map[256])
-{
- long n;
- int status;
-
- if (1 == (status = parse_long (sp, smax, &n, base, map)))
- *np = (int) n;
- return status;
-}
-
-static int parse_short (char **sp, char *smax, short *np,
- long base, unsigned char map[256])
-{
- long n;
- int status;
-
- if (1 == (status = parse_long (sp, smax, &n, base, map)))
- *np = (short) n;
- return status;
-}
-
-static int parse_ulong (char **sp, char *smax, unsigned long *np,
- long base, unsigned char map[256])
-{
- return parse_long (sp, smax, (long *) np, base, map);
-}
-
-static int parse_uint (char **sp, char *smax, unsigned int *np,
- long base, unsigned char map[256])
-{
- return parse_int (sp, smax, (int *) np, base, map);
-}
-
-static int parse_ushort (char **sp, char *smax, unsigned short *np,
- long base, unsigned char map[256])
-{
- return parse_short (sp, smax, (short *) np, base, map);
-}
-
-#if SLANG_HAS_FLOAT
-/*
- * In an ideal world, strtod would be the correct function to use. However,
- * there may be problems relying on this function because some systems do
- * not support and some that do get it wrong. So, I will handle the parsing
- * of the string and let atof or strtod handle the arithmetic.
- */
-static int parse_double (char **sp, char *smax, double *d)
-{
- char *s, *s0;
- int sign;
- int expon;
- unsigned char map[256];
- char buf[128];
- int has_leading_zeros;
- char *start_pos, *sign_pos;
- char *b, *bmax;
-
- start_pos = *sp;
- s = get_sign (start_pos, smax, &sign);
- if (s >= smax)
- {
- errno = _SLerrno_errno = EINVAL;
- return 0;
- }
-
- /* Prepare the buffer that will be passed to strtod */
- /* Allow the exponent to be 5 significant digits: E+xxxxx\0 */
- bmax = buf + (sizeof (buf) - 8);
- buf[0] = '0'; buf[1] = '.';
- b = buf + 2;
-
- init_map (map, 10);
-
- /* Skip leading 0s */
- s0 = s;
- while ((s < smax) && (*s == '0'))
- s++;
- has_leading_zeros = (s != s0);
-
- expon = 0;
- while (s < smax)
- {
- unsigned char value = map [(unsigned char) *s];
-
- if (value == 0xFF)
- break;
-
- if (b < bmax)
- *b++ = *s;
-
- expon++;
- s++;
- }
-
- if ((s < smax) && (*s == '.'))
- {
- s++;
- if (b == buf + 2) /* nothing added yet */
- {
- while ((s < smax) && (*s == '0'))
- {
- expon--;
- s++;
- }
- }
-
- while (s < smax)
- {
- unsigned char value = map [(unsigned char) *s];
-
- if (value == 0xFF)
- break;
-
- if (b < bmax)
- *b++ = *s;
- s++;
- }
- }
-
- if ((b == buf + 2)
- && (has_leading_zeros == 0))
- {
- *sp = start_pos;
- errno = EINVAL;
- return 0;
- }
-
- if ((s + 1 < smax) && ((*s == 'E') || (*s == 'e')))
- {
- int e;
- int esign;
-
- s0 = s;
- s = get_sign (s + 1, smax, &esign);
- sign_pos = s;
- e = 0;
- while (s < smax)
- {
- unsigned char value = map [(unsigned char) *s];
- if (value == 0xFF)
- break;
- if (e < 25000) /* avoid overflow if 16 bit */
- e = 10 * e + value;
- s++;
- }
-#ifdef ERANGE
- if (e >= 25000)
- errno = ERANGE;
-#endif
- if (s == sign_pos)
- s = s0; /* ...E-X */
- else
- {
- e = esign * e;
- expon += e;
- }
- }
-
- if (expon != 0)
- sprintf (b, "e%d", expon);
- else
- *b = 0;
-
- *sp = s;
-#if HAVE_STRTOD
- *d = sign * strtod (buf, NULL);
-#else
- *d = sign * atof (buf);
-#endif
- return 1;
-}
-
-static int parse_float (char **sp, char *smax, float *d)
-{
- double x;
- if (1 == parse_double (sp, smax, &x))
- {
- *d = (float) x;
- return 1;
- }
- return 0;
-}
-#endif /* SLANG_HAS_FLOAT */
-
-static int parse_string (char **sp, char *smax, char **str)
-{
- char *s, *s0;
-
- s0 = s = *sp;
- while (s < smax)
- {
- if (isspace (*s))
- break;
- s++;
- }
- if (NULL == (*str = SLang_create_nslstring (s0, (unsigned int) (s - s0))))
- return -1;
-
- *sp = s;
- return 1;
-}
-
-static int parse_bstring (char **sp, char *smax, char **str)
-{
- char *s;
-
- s = *sp;
- if (NULL == (*str = SLang_create_nslstring (s, (unsigned int) (smax - s))))
- return -1;
-
- *sp = smax;
- return 1;
-}
-
-static int parse_range (char **sp, char *smax, char **fp, char **str)
-{
- char *s, *s0;
- char *range;
- char *f;
- unsigned char map[256];
- unsigned char reverse;
-
- /* How can one represent a range with just '^'? The naive answer is
- * is [^]. However, this may be interpreted as meaning any character
- * but ']' and others. Let's assume that the user will not use a range
- * to match '^'.
- */
- f = *fp;
- /* f is a pointer to (one char after) [...]. */
- if (*f == '^')
- {
- f++;
- reverse = 1;
- }
- else reverse = 0;
-
- s0 = f;
- if (*f == ']')
- f++;
-
- while (1)
- {
- char ch = *f;
-
- if (ch == 0)
- {
- SLang_verror (SL_INVALID_PARM, "Unexpected end of range in format");
- return -1;
- }
- if (ch == ']')
- break;
- f++;
- }
- if (NULL == (range = SLmake_nstring (s0, (unsigned int) (f - s0))))
- return -1;
- *fp = f + 1; /* skip ] */
-
- SLmake_lut (map, (unsigned char *) range, reverse);
- SLfree (range);
-
- s0 = s = *sp;
- while ((s < smax) && map [(unsigned char) *s])
- s++;
-
- if (NULL == (*str = SLang_create_nslstring (s0, (unsigned int) (s - s0))))
- return -1;
-
- *sp = s;
- return 1;
-}
-
-
-int _SLang_sscanf (void)
-{
- int num;
- unsigned int num_refs;
- char *format;
- char *input_string, *input_string_max;
- char *f, *s;
- unsigned char map8[256], map10[256], map16[256];
-
- if (SLang_Num_Function_Args < 2)
- {
- SLang_verror (SL_INVALID_PARM, "Int_Type sscanf (str, format, ...)");
- return -1;
- }
-
- num_refs = (unsigned int) SLang_Num_Function_Args;
- if (-1 == SLreverse_stack (num_refs))
- return -1;
- num_refs -= 2;
-
- if (-1 == SLang_pop_slstring (&input_string))
- return -1;
-
- if (-1 == SLang_pop_slstring (&format))
- {
- SLang_free_slstring (input_string);
- return -1;
- }
-
- f = format;
- s = input_string;
- input_string_max = input_string + strlen (input_string);
-
- init_map (map8, 8);
- init_map (map10, 10);
- init_map (map16, 16);
-
- num = 0;
-
- while (num_refs != 0)
- {
- SLang_Object_Type obj;
- SLang_Ref_Type *ref;
- char *smax;
- unsigned char *map;
- int base;
- int no_assign;
- int is_short;
- int is_long;
- int status;
- char chf;
- unsigned int width;
- int has_width;
-
- chf = *f++;
-
- if (chf == 0)
- {
- /* Hmmm.... what is the most useful thing to do?? */
-#if 1
- break;
-#else
- SLang_verror (SL_INVALID_PARM, "sscanf: format not big enough for output list");
- goto return_error;
-#endif
- }
-
- if (isspace (chf))
- {
- s = skip_whitespace (s);
- continue;
- }
-
- if ((chf != '%')
- || ((chf = *f++) == '%'))
- {
- if (*s != chf)
- break;
- s++;
- continue;
- }
-
- no_assign = 0;
- is_short = 0;
- is_long = 0;
- width = 0;
- smax = input_string_max;
-
- /* Look for the flag character */
- if (chf == '*')
- {
- no_assign = 1;
- chf = *f++;
- }
-
- /* Width */
- has_width = isdigit (chf);
- if (has_width)
- {
- f--;
- (void) parse_uint (&f, f + strlen(f), &width, 10, map10);
- chf = *f++;
- }
-
- /* Now the type modifier */
- switch (chf)
- {
- case 'h':
- is_short = 1;
- chf = *f++;
- break;
-
- case 'L': /* not implemented */
- case 'l':
- is_long = 1;
- chf = *f++;
- break;
- }
-
- status = -1;
-
- if ((chf != 'c') && (chf != '['))
- s = skip_whitespace (s);
-
- if (has_width)
- {
- if (width > (unsigned int) (input_string_max - s))
- width = (unsigned int) (input_string_max - s);
- smax = s + width;
- }
-
- /* Now the format descriptor */
-
- map = map10;
- base = 10;
-
- try_again: /* used by i, x, and o, conversions */
- switch (chf)
- {
- case 0:
- SLang_verror (SL_INVALID_PARM, "sscanf: Unexpected end of format");
- goto return_error;
- case 'D':
- is_long = 1;
- case 'd':
- if (is_short)
- {
- obj.data_type = SLANG_SHORT_TYPE;
- status = parse_short (&s, smax, &obj.v.short_val, base, map);
- }
- else if (is_long)
- {
- obj.data_type = SLANG_LONG_TYPE;
- status = parse_long (&s, smax, &obj.v.long_val, base, map);
- }
- else
- {
- obj.data_type = SLANG_INT_TYPE;
- status = parse_int (&s, smax, &obj.v.int_val, base, map);
- }
- break;
-
-
- case 'U':
- is_long = 1;
- case 'u':
- if (is_short)
- {
- obj.data_type = SLANG_USHORT_TYPE;
- status = parse_ushort (&s, smax, &obj.v.ushort_val, base, map);
- }
- else if (is_long)
- {
- obj.data_type = SLANG_ULONG_TYPE;
- status = parse_ulong (&s, smax, &obj.v.ulong_val, base, map);
- }
- else
- {
- obj.data_type = SLANG_INT_TYPE;
- status = parse_uint (&s, smax, &obj.v.uint_val, base, map);
- }
- break;
-
- case 'I':
- is_long = 1;
- case 'i':
- if ((s + 1 >= smax)
- || (*s != 0))
- chf = 'd';
- else if (((s[1] == 'x') || (s[1] == 'X'))
- && (s + 2 < smax))
- {
- s += 2;
- chf = 'x';
- }
- else chf = 'o';
- goto try_again;
-
- case 'O':
- is_long = 1;
- case 'o':
- map = map8;
- base = 8;
- chf = 'd';
- goto try_again;
-
- case 'X':
- is_long = 1;
- case 'x':
- base = 16;
- map = map16;
- chf = 'd';
- goto try_again;
-
- case 'E':
- case 'F':
- is_long = 1;
- case 'e':
- case 'f':
- case 'g':
-#if SLANG_HAS_FLOAT
- if (is_long)
- {
- obj.data_type = SLANG_DOUBLE_TYPE;
- status = parse_double (&s, smax, &obj.v.double_val);
- }
- else
- {
- obj.data_type = SLANG_FLOAT_TYPE;
- status = parse_float (&s, smax, &obj.v.float_val);
- }
-#else
- SLang_verror (SL_NOT_IMPLEMENTED,
- "This version of the S-Lang does not support floating point");
- status = -1;
-#endif
- break;
-
- case 's':
- obj.data_type = SLANG_STRING_TYPE;
- status = parse_string (&s, smax, &obj.v.s_val);
- break;
-
- case 'c':
- if (has_width == 0)
- {
- obj.data_type = SLANG_UCHAR_TYPE;
- obj.v.uchar_val = *s++;
- status = 1;
- break;
- }
- obj.data_type = SLANG_STRING_TYPE;
- status = parse_bstring (&s, smax, &obj.v.s_val);
- break;
-
- case '[':
- obj.data_type = SLANG_STRING_TYPE;
- status = parse_range (&s, smax, &f, &obj.v.s_val);
- break;
-
- case 'n':
- obj.data_type = SLANG_UINT_TYPE;
- obj.v.uint_val = (unsigned int) (s - input_string);
- status = 1;
- break;
-
- default:
- status = -1;
- SLang_verror (SL_NOT_IMPLEMENTED, "format specifier '%c' is not supported", chf);
- break;
- }
-
- if (status == 0)
- break;
-
- if (status == -1)
- goto return_error;
-
- if (no_assign)
- {
- SLang_free_object (&obj);
- continue;
- }
-
- if (-1 == SLang_pop_ref (&ref))
- {
- SLang_free_object (&obj);
- goto return_error;
- }
-
- if (-1 == SLang_push (&obj))
- {
- SLang_free_object (&obj);
- SLang_free_ref (ref);
- goto return_error;
- }
-
- if (-1 == _SLang_deref_assign (ref))
- {
- SLang_free_ref (ref);
- goto return_error;
- }
- SLang_free_ref (ref);
-
- num++;
- num_refs--;
- }
-
- if (-1 == SLdo_pop_n (num_refs))
- goto return_error;
-
- SLang_free_slstring (format);
- SLang_free_slstring (input_string);
- return num;
-
- return_error:
- /* NULLS ok */
- SLang_free_slstring (format);
- SLang_free_slstring (input_string);
- return -1;
-}
-
-
-# if SLANG_HAS_FLOAT
-
-#ifndef HAVE_STDLIB_H
-/* Oh dear. Where is the prototype for atof? If not in stdlib, then
- * I do not know where. Not in math.h on some systems either.
- */
-extern double atof ();
-#endif
-
-double _SLang_atof (char *s)
-{
- double x;
-
- s = skip_whitespace (s);
- errno = 0;
-
- if (1 != parse_double (&s, s + strlen (s), &x))
- {
- if ((0 == strcmp ("NaN", s))
- || (0 == strcmp ("-Inf", s))
- || (0 == strcmp ("Inf", s)))
- return atof (s); /* let this deal with it */
-#ifdef EINVAL
- errno = _SLerrno_errno = EINVAL;
-#endif
- return 0.0;
- }
- if (errno)
- _SLerrno_errno = errno;
- return x;
-}
-#endif
diff --git a/mdk-stage1/slang/slscroll.c b/mdk-stage1/slang/slscroll.c
deleted file mode 100644
index 358296116..000000000
--- a/mdk-stage1/slang/slscroll.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/* SLang Scrolling Window Routines */
-/* Copyright (c) 1996, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static void find_window_bottom (SLscroll_Window_Type *win)
-{
- unsigned int nrows;
- unsigned int hidden_mask;
- SLscroll_Type *bot, *cline, *last_bot;
- unsigned int row;
-
- nrows = win->nrows;
- hidden_mask = win->hidden_mask;
- cline = win->current_line;
-
- win->window_row = row = 0;
- last_bot = bot = win->top_window_line;
-
- while (row < nrows)
- {
- if (bot == cline)
- win->window_row = row;
-
- last_bot = bot;
-
- if (bot == NULL)
- break;
-
- bot = bot->next;
-
- if (hidden_mask)
- {
- while ((bot != NULL) && (bot->flags & hidden_mask))
- bot = bot->next;
- }
-
- row++;
- }
-
- win->bot_window_line = last_bot;
-}
-
-static int find_top_to_recenter (SLscroll_Window_Type *win)
-{
- unsigned int nrows;
- unsigned int hidden_mask;
- SLscroll_Type *prev, *last_prev, *cline;
-
- nrows = win->nrows;
- cline = win->current_line;
- hidden_mask = win->hidden_mask;
-
- nrows = nrows / 2;
-
- last_prev = prev = cline;
-
- while (nrows && (prev != NULL))
- {
- nrows--;
- last_prev = prev;
- do
- {
- prev = prev->prev;
- }
- while (hidden_mask
- && (prev != NULL)
- && (prev->flags & hidden_mask));
- }
-
- if (prev == NULL) prev = last_prev;
-
- win->top_window_line = prev;
- find_window_bottom (win);
-
- return 0;
-}
-
-#define HAS_BORDER_CODE 1
-int SLscroll_find_top (SLscroll_Window_Type *win)
-{
- unsigned int i;
- SLscroll_Type *cline, *prev, *next;
- SLscroll_Type *top_window_line;
- unsigned int nrows;
- unsigned int hidden_mask;
- int scroll_mode;
- unsigned int border;
-
- cline = win->current_line;
- nrows = win->nrows;
- scroll_mode = win->cannot_scroll;
- border = win->border;
- if (scroll_mode == 2)
- border = 0;
-
- if ((cline == NULL) || (nrows <= 1))
- {
- win->top_window_line = cline;
- find_window_bottom (win);
- return 0;
- }
-
- hidden_mask = win->hidden_mask;
-
- /* Note: top_window_line might be a bogus pointer. This means that I cannot
- * access it unless it really corresponds to a pointer in the buffer.
- */
- top_window_line = win->top_window_line;
-
- if (top_window_line == NULL)
- return find_top_to_recenter (win);
-
- /* Chances are that the current line is visible in the window. This means
- * that the top window line should be above it.
- */
- prev = cline;
-
- i = 0;
-
- while ((i < nrows) && (prev != NULL))
- {
- if (prev == top_window_line)
- {
- SLscroll_Type *twl = top_window_line;
- int dir = 0;
-
- if (i < border) dir = -1; else if (i + border >= nrows) dir = 1;
-
- if (dir) while (border)
- {
- if (dir < 0) twl = twl->prev;
- else twl = twl->next;
-
- if (twl == NULL)
- {
- twl = top_window_line;
- break;
- }
- if ((hidden_mask == 0)
- || (0 == (twl->flags & hidden_mask)))
- border--;
- }
-
- win->top_window_line = twl;
- find_window_bottom (win);
- return 0;
- }
-
- do
- {
- prev = prev->prev;
- }
- while (hidden_mask
- && (prev != NULL)
- && (prev->flags & hidden_mask));
- i++;
- }
-
- /* Now check the borders of the window. Perhaps the current line lies
- * outsider the border by a line. Only do this if terminal can scroll.
- */
-
- if (scroll_mode == 1)
- return find_top_to_recenter (win);
- else if (scroll_mode == -1)
- scroll_mode = 0;
-
- next = cline->next;
- while (hidden_mask
- && (next != NULL)
- && (next->flags & hidden_mask))
- next = next->next;
-
- if ((next != NULL)
- && (next == top_window_line))
- {
- /* The current line is one line above the window. This means user
- * has moved up past the top of the window. If scroll_mode is set
- * to scroll by pages, we need to do a page up.
- */
-
- win->top_window_line = cline;
- find_window_bottom (win);
-
- if (scroll_mode) return SLscroll_pageup (win);
-
- return 0;
- }
-
- prev = cline->prev;
-
- while (hidden_mask
- && (prev != NULL)
- && (prev->flags & hidden_mask))
- prev = prev->prev;
-
- if ((prev == NULL)
- || (prev != win->bot_window_line))
- return find_top_to_recenter (win);
-
- /* It looks like cline is below window by one line. See what line should
- * be at top to scroll it into view. Only do this unless we are scrolling
- * by pages.
- */
- if (scroll_mode)
- {
- win->top_window_line = cline;
- find_window_bottom (win);
- return 0;
- }
-
- i = 2;
- while ((i < nrows) && (prev != NULL))
- {
- do
- {
- prev = prev->prev;
- }
- while (hidden_mask
- && (prev != NULL)
- && (prev->flags & hidden_mask));
- i++;
- }
-
- if (prev != NULL)
- {
- win->top_window_line = prev;
- find_window_bottom (win);
- return 0;
- }
-
- return find_top_to_recenter (win);
-}
-
-int SLscroll_find_line_num (SLscroll_Window_Type *win)
-{
- SLscroll_Type *cline, *l;
- unsigned int n;
- unsigned int hidden_mask;
-
- if (win == NULL) return -1;
-
- hidden_mask = win->hidden_mask;
- cline = win->current_line;
-
- n = 1;
-
- l = win->lines;
- while (l != cline)
- {
- if ((hidden_mask == 0)
- || (0 == (l->flags & hidden_mask)))
- n++;
-
- l = l->next;
- }
-
- win->line_num = n;
- n--;
-
- while (l != NULL)
- {
- if ((hidden_mask == 0)
- || (0 == (l->flags & hidden_mask)))
- n++;
- l = l->next;
- }
- win->num_lines = n;
-
- return 0;
-}
-
-unsigned int SLscroll_next_n (SLscroll_Window_Type *win, unsigned int n)
-{
- unsigned int i;
- unsigned int hidden_mask;
- SLscroll_Type *l, *cline;
-
- if ((win == NULL)
- || (NULL == (cline = win->current_line)))
- return 0;
-
- hidden_mask = win->hidden_mask;
- l = cline;
- i = 0;
- while (i < n)
- {
- l = l->next;
- while (hidden_mask
- && (l != NULL) && (l->flags & hidden_mask))
- l = l->next;
-
- if (l == NULL)
- break;
-
- i++;
- cline = l;
- }
-
- win->current_line = cline;
- win->line_num += i;
- return i;
-}
-
-unsigned int SLscroll_prev_n (SLscroll_Window_Type *win, unsigned int n)
-{
- unsigned int i;
- unsigned int hidden_mask;
- SLscroll_Type *l, *cline;
-
- if ((win == NULL)
- || (NULL == (cline = win->current_line)))
- return 0;
-
- hidden_mask = win->hidden_mask;
- l = cline;
- i = 0;
- while (i < n)
- {
- l = l->prev;
- while (hidden_mask
- && (l != NULL) && (l->flags & hidden_mask))
- l = l->prev;
-
- if (l == NULL)
- break;
-
- i++;
- cline = l;
- }
-
- win->current_line = cline;
- win->line_num -= i;
- return i;
-}
-
-int SLscroll_pageup (SLscroll_Window_Type *win)
-{
- SLscroll_Type *l, *top;
- unsigned int nrows, hidden_mask;
- unsigned int n;
-
- if (win == NULL)
- return -1;
-
- (void) SLscroll_find_top (win);
-
- nrows = win->nrows;
-
- if ((NULL != (top = win->top_window_line))
- && (nrows > 2))
- {
- n = 0;
- hidden_mask = win->hidden_mask;
- l = win->current_line;
- while ((l != NULL) && (l != top))
- {
- l = l->prev;
- if ((hidden_mask == 0)
- || ((l != NULL) && (0 == (l->flags & hidden_mask))))
- n++;
- }
-
- if (l != NULL)
- {
- unsigned int save_line_num;
- int ret = 0;
-
- win->current_line = l;
- win->line_num -= n;
-
- /* Compute a new top/bottom header */
- save_line_num = win->line_num;
-
- if ((0 == SLscroll_prev_n (win, nrows - 1))
- && (n == 0))
- ret = -1;
-
- win->top_window_line = win->current_line;
- win->current_line = l;
- win->line_num = save_line_num;
-
- find_window_bottom (win);
- return ret;
- }
- }
-
- if (nrows < 2) nrows++;
- if (0 == SLscroll_prev_n (win, nrows - 1))
- return -1;
- return 0;
-}
-
-int SLscroll_pagedown (SLscroll_Window_Type *win)
-{
- SLscroll_Type *l, *bot;
- unsigned int nrows, hidden_mask;
- unsigned int n;
-
- if (win == NULL)
- return -1;
-
- (void) SLscroll_find_top (win);
-
- nrows = win->nrows;
-
- if ((NULL != (bot = win->bot_window_line))
- && (nrows > 2))
- {
- n = 0;
- hidden_mask = win->hidden_mask;
- l = win->current_line;
- while ((l != NULL) && (l != bot))
- {
- l = l->next;
- if ((hidden_mask == 0)
- || ((l != NULL) && (0 == (l->flags & hidden_mask))))
- n++;
- }
-
- if (l != NULL)
- {
- win->current_line = l;
- win->top_window_line = l;
- win->line_num += n;
-
- find_window_bottom (win);
-
- if (n || (bot != win->bot_window_line))
- return 0;
-
- return -1;
- }
- }
-
- if (nrows < 2) nrows++;
- if (0 == SLscroll_next_n (win, nrows - 1))
- return -1;
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slsearch.c b/mdk-stage1/slang/slsearch.c
deleted file mode 100644
index a9a427a7d..000000000
--- a/mdk-stage1/slang/slsearch.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef upcase
-# undef upcase
-#endif
-
-#define upcase(ch) (cs ? ch : UPPER_CASE(ch))
-
-static unsigned char *search_forward (register unsigned char *beg,
- unsigned char *end,
- unsigned char *key,
- register int key_len, int cs, int *ind)
-{
- register unsigned char char1;
- unsigned char *pos;
- int j, str_len;
- register unsigned char ch;
- register int db;
-
- str_len = (int) (end - beg);
- if (str_len < key_len) return (NULL);
-
- if (key_len == 0)
- return NULL;
-
- char1 = key[key_len - 1];
- beg += (key_len - 1);
-
- while(1)
- {
- if (cs) while (beg < end)
- {
- ch = *beg;
- db = ind[(unsigned char) ch];
- if ((db < key_len) && (ch == char1)) break;
- beg += db; /* ind[(unsigned char) ch]; */
- }
- else while (beg < end)
- {
- ch = *beg;
- db = ind[(unsigned char) ch];
- if ((db < key_len) &&
- (UPPER_CASE(ch) == char1)) break;
- beg += db; /* ind[(unsigned char) ch]; */
- }
-
- if (beg >= end) return(NULL);
-
- pos = beg - (key_len - 1);
- for (j = 0; j < key_len; j++)
- {
- ch = upcase(pos[j]);
- if (ch != (unsigned char) key[j]) break;
- }
-
- if (j == key_len) return(pos);
- beg += 1;
- }
-}
-
-static unsigned char *search_backward (unsigned char *beg,unsigned char *end,
- unsigned char *key, int key_len,
- int cs, int *ind)
-{
- unsigned char ch, char1;
- int j, str_len, ofs;
-
- str_len = (int) (end - beg);
- if (str_len < key_len) return (NULL);
-
- if (key_len == 0)
- return NULL;
-
- /* end -= (key_len - 1); */
- end -= key_len;
-
- char1 = key[0];
-
- while(1)
- {
- while ((beg <= end) && (ch = *end, ch = upcase(ch), ch != char1))
- {
- ofs = ind[(unsigned char) ch];
-#ifdef __MSDOS__
- /* This is needed for msdos segment wrapping problems */
- if (beg + ofs > end) return(NULL);
-#endif
- end -= ofs;
- }
- if (beg > end) return(NULL);
- for (j = 1; j < key_len; j++)
- {
- ch = upcase(end[j]);
- if (ch != key[j]) break;
- }
- if (j == key_len) return(end);
- end--;
- }
-}
-
-unsigned char *SLsearch (unsigned char *pmin, unsigned char *pmax,
- SLsearch_Type *st)
-{
- if (st->dir > 0) return search_forward (pmin, pmax, st->key,
- st->key_len, st->cs, st->ind);
- else return search_backward (pmin, pmax, st->key,
- st->key_len, st->cs, st->ind);
-}
-
-static int Case_Tables_Ok;
-
-int SLsearch_init (char *str, int dir, int cs, SLsearch_Type *st)
-{
- int i, maxi;
- register int max = strlen(str);
- unsigned char *w, *work = st->key;
- register int *indp, *indpm;
- int *ind = st->ind;
-
- if (max >= (int) sizeof (st->key))
- {
- SLang_doerror ("Search string too long.");
- return -1;
- }
-
- st->dir = dir; st->cs = cs;
-
- if (!Case_Tables_Ok) SLang_init_case_tables ();
-
- if (dir > 0)
- {
- w = work;
- }
- else
- {
- maxi = max - 1;
- str = str + maxi;
- w = work + maxi;
- }
-
- /* for (i = 0; i < 256; i++) ind[i] = max; */
- indp = ind; indpm = ind + 256;
- while (indp < indpm)
- {
- *indp++ = max;
- *indp++ = max;
- *indp++ = max;
- *indp++ = max;
- }
-
- i = 0;
- if (cs) while (i < max)
- {
- i++;
- maxi = max - i;
- *w = *str;
- ind[(unsigned char) *str] = maxi;
- str += dir; w += dir;
- }
- else while (i < max)
- {
- i++;
- maxi = max - i;
- *w = UPPER_CASE(*str);
- ind[(unsigned char) *w] = maxi;
- ind[(unsigned char) LOWER_CASE(*str)] = maxi;
- str += dir; w += dir;
- }
-
- work[max] = 0;
- st->key_len = max;
- return max;
-}
-
-/* 8bit clean upper and lowercase macros */
-unsigned char _SLChg_LCase_Lut[256];
-unsigned char _SLChg_UCase_Lut[256];
-
-void SLang_define_case (int *u, int *l)
-{
- unsigned char up = (unsigned char) *u, dn = (unsigned char) *l;
-
- _SLChg_LCase_Lut[up] = dn;
- _SLChg_LCase_Lut[dn] = dn;
- _SLChg_UCase_Lut[dn] = up;
- _SLChg_UCase_Lut[up] = up;
-}
-
-void SLang_init_case_tables (void)
-{
- int i, j;
- if (Case_Tables_Ok) return;
-
- for (i = 0; i < 256; i++)
- {
- _SLChg_UCase_Lut[i] = i;
- _SLChg_LCase_Lut[i] = i;
- }
-
- for (i = 'A'; i <= 'Z'; i++)
- {
- j = i + 32;
- _SLChg_UCase_Lut[j] = i;
- _SLChg_LCase_Lut[i] = j;
- }
-#ifdef PC_SYSTEM
- /* Initialize for DOS code page 437. */
- _SLChg_UCase_Lut[135] = 128; _SLChg_LCase_Lut[128] = 135;
- _SLChg_UCase_Lut[132] = 142; _SLChg_LCase_Lut[142] = 132;
- _SLChg_UCase_Lut[134] = 143; _SLChg_LCase_Lut[143] = 134;
- _SLChg_UCase_Lut[130] = 144; _SLChg_LCase_Lut[144] = 130;
- _SLChg_UCase_Lut[145] = 146; _SLChg_LCase_Lut[146] = 145;
- _SLChg_UCase_Lut[148] = 153; _SLChg_LCase_Lut[153] = 148;
- _SLChg_UCase_Lut[129] = 154; _SLChg_LCase_Lut[154] = 129;
- _SLChg_UCase_Lut[164] = 165; _SLChg_LCase_Lut[165] = 164;
-#else
- /* ISO Latin */
- for (i = 192; i <= 221; i++)
- {
- j = i + 32;
- _SLChg_UCase_Lut[j] = i;
- _SLChg_LCase_Lut[i] = j;
- }
- _SLChg_UCase_Lut[215] = 215; _SLChg_LCase_Lut[215] = 215;
- _SLChg_UCase_Lut[223] = 223; _SLChg_LCase_Lut[223] = 223;
- _SLChg_UCase_Lut[247] = 247; _SLChg_LCase_Lut[247] = 247;
- _SLChg_UCase_Lut[255] = 255; _SLChg_LCase_Lut[255] = 255;
-#endif
- Case_Tables_Ok = 1;
-}
diff --git a/mdk-stage1/slang/slsignal.c b/mdk-stage1/slang/slsignal.c
deleted file mode 100644
index 30707dea5..000000000
--- a/mdk-stage1/slang/slsignal.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <signal.h>
-
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_WAIT_H
-# include <sys/wait.h>
-#endif
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Do not trust these environments */
-#if defined(__CYGWIN32__) || defined(__MINGW32__) || defined(AMIGA)
-# ifdef SLANG_POSIX_SIGNALS
-# undef SLANG_POSIX_SIGNALS
-# endif
-#endif
-
-/* This function will cause system calls to be restarted after signal if possible */
-SLSig_Fun_Type *SLsignal (int sig, SLSig_Fun_Type *f)
-{
-#if defined(SLANG_POSIX_SIGNALS)
- struct sigaction old_sa, new_sa;
-
-# ifdef SIGALRM
- /* We want system calls to be interrupted by SIGALRM. */
- if (sig == SIGALRM) return SLsignal_intr (sig, f);
-# endif
-
- sigemptyset (&new_sa.sa_mask);
- new_sa.sa_handler = f;
-
- new_sa.sa_flags = 0;
-# ifdef SA_RESTART
- new_sa.sa_flags |= SA_RESTART;
-# endif
-
- if (-1 == sigaction (sig, &new_sa, &old_sa))
- return (SLSig_Fun_Type *) SIG_ERR;
-
- return old_sa.sa_handler;
-#else
- /* Not POSIX. */
- return signal (sig, f);
-#endif
-}
-
-/* This function will NOT cause system calls to be restarted after
- * signal if possible
- */
-SLSig_Fun_Type *SLsignal_intr (int sig, SLSig_Fun_Type *f)
-{
-#ifdef SLANG_POSIX_SIGNALS
- struct sigaction old_sa, new_sa;
-
- sigemptyset (&new_sa.sa_mask);
- new_sa.sa_handler = f;
-
- new_sa.sa_flags = 0;
-# ifdef SA_INTERRUPT
- new_sa.sa_flags |= SA_INTERRUPT;
-# endif
-
- if (-1 == sigaction (sig, &new_sa, &old_sa))
- return (SLSig_Fun_Type *) SIG_ERR;
-
- return old_sa.sa_handler;
-#else
- /* Not POSIX. */
- return signal (sig, f);
-#endif
-}
-
-/* We are primarily interested in blocking signals that would cause the
- * application to reset the tty. These include suspend signals and
- * possibly interrupt signals.
- */
-#ifdef SLANG_POSIX_SIGNALS
-static sigset_t Old_Signal_Mask;
-#endif
-
-static volatile unsigned int Blocked_Depth;
-
-int SLsig_block_signals (void)
-{
-#ifdef SLANG_POSIX_SIGNALS
- sigset_t new_mask;
-#endif
-
- Blocked_Depth++;
- if (Blocked_Depth != 1)
- {
- return 0;
- }
-
-#ifdef SLANG_POSIX_SIGNALS
- sigemptyset (&new_mask);
-# ifdef SIGQUIT
- sigaddset (&new_mask, SIGQUIT);
-# endif
-# ifdef SIGTSTP
- sigaddset (&new_mask, SIGTSTP);
-# endif
-# ifdef SIGINT
- sigaddset (&new_mask, SIGINT);
-# endif
-# ifdef SIGTTIN
- sigaddset (&new_mask, SIGTTIN);
-# endif
-# ifdef SIGTTOU
- sigaddset (&new_mask, SIGTTOU);
-# endif
-# ifdef SIGWINCH
- sigaddset (&new_mask, SIGWINCH);
-# endif
-
- (void) sigprocmask (SIG_BLOCK, &new_mask, &Old_Signal_Mask);
- return 0;
-#else
- /* Not implemented. */
- return -1;
-#endif
-}
-
-int SLsig_unblock_signals (void)
-{
- if (Blocked_Depth == 0)
- return -1;
-
- Blocked_Depth--;
-
- if (Blocked_Depth != 0)
- return 0;
-
-#ifdef SLANG_POSIX_SIGNALS
- (void) sigprocmask (SIG_SETMASK, &Old_Signal_Mask, NULL);
- return 0;
-#else
- return -1;
-#endif
-}
-
-#ifdef MSWINDOWS
-int SLsystem (char *cmd)
-{
- SLang_verror (SL_NOT_IMPLEMENTED, "system not implemented");
- return -1;
-}
-
-#else
-int SLsystem (char *cmd)
-{
-#ifdef SLANG_POSIX_SIGNALS
- pid_t pid;
- int status;
- struct sigaction ignore;
-# ifdef SIGINT
- struct sigaction save_intr;
-# endif
-# ifdef SIGQUIT
- struct sigaction save_quit;
-# endif
-# ifdef SIGCHLD
- sigset_t child_mask, save_mask;
-# endif
-
- if (cmd == NULL) return 1;
-
- ignore.sa_handler = SIG_IGN;
- sigemptyset (&ignore.sa_mask);
- ignore.sa_flags = 0;
-
-# ifdef SIGINT
- if (-1 == sigaction (SIGINT, &ignore, &save_intr))
- return -1;
-# endif
-
-# ifdef SIGQUIT
- if (-1 == sigaction (SIGQUIT, &ignore, &save_quit))
- {
- (void) sigaction (SIGINT, &save_intr, NULL);
- return -1;
- }
-# endif
-
-# ifdef SIGCHLD
- sigemptyset (&child_mask);
- sigaddset (&child_mask, SIGCHLD);
- if (-1 == sigprocmask (SIG_BLOCK, &child_mask, &save_mask))
- {
-# ifdef SIGINT
- (void) sigaction (SIGINT, &save_intr, NULL);
-# endif
-# ifdef SIGQUIT
- (void) sigaction (SIGQUIT, &save_quit, NULL);
-# endif
- return -1;
- }
-# endif
-
- pid = fork();
-
- if (pid == -1)
- status = -1;
- else if (pid == 0)
- {
- /* Child */
-# ifdef SIGINT
- (void) sigaction (SIGINT, &save_intr, NULL);
-# endif
-# ifdef SIGQUIT
- (void) sigaction (SIGQUIT, &save_quit, NULL);
-# endif
-# ifdef SIGCHLD
- (void) sigprocmask (SIG_SETMASK, &save_mask, NULL);
-# endif
-
- execl ("/bin/sh", "sh", "-c", cmd, NULL);
- _exit (127);
- }
- else
- {
- /* parent */
- while (-1 == waitpid (pid, &status, 0))
- {
-# ifdef EINTR
- if (errno == EINTR)
- continue;
-# endif
-# ifdef ERESTARTSYS
- if (errno == ERESTARTSYS)
- continue;
-# endif
- status = -1;
- break;
- }
- }
-# ifdef SIGINT
- if (-1 == sigaction (SIGINT, &save_intr, NULL))
- status = -1;
-# endif
-# ifdef SIGQUIT
- if (-1 == sigaction (SIGQUIT, &save_quit, NULL))
- status = -1;
-# endif
-# ifdef SIGCHLD
- if (-1 == sigprocmask (SIG_SETMASK, &save_mask, NULL))
- status = -1;
-# endif
-
- return status;
-
-#else /* No POSIX Signals */
-# ifdef SIGINT
- void (*sint)(int);
-# endif
-# ifdef SIGQUIT
- void (*squit)(int);
-# endif
- int status;
-
-# ifdef SIGQUIT
- squit = SLsignal (SIGQUIT, SIG_IGN);
-# endif
-# ifdef SIGINT
- sint = SLsignal (SIGINT, SIG_IGN);
-# endif
- status = system (cmd);
-# ifdef SIGINT
- SLsignal (SIGINT, sint);
-# endif
-# ifdef SIGQUIT
- SLsignal (SIGQUIT, squit);
-# endif
- return status;
-#endif /* POSIX_SIGNALS */
-}
-#endif
-
-#if 0
-#include <windows.h>
-static int msw_system (char *cmd)
-{
- STARTUPINFO startup_info;
- PROCESS_INFORMATION process_info;
- int status;
-
- if (cmd == NULL) return -1;
-
- memset ((char *) &startup_info, 0, sizeof (STARTUPINFO));
- startup_info.cb = sizeof(STARTUPINFO);
- startup_info.dwFlags = STARTF_USESHOWWINDOW;
- startup_info.wShowWindow = SW_SHOWDEFAULT;
-
- if (FALSE == CreateProcess (NULL,
- cmd,
- NULL,
- NULL,
- FALSE,
- NORMAL_PRIORITY_CLASS|CREATE_NEW_CONSOLE,
- NULL,
- NULL,
- &startup_info,
- &process_info))
- {
- SLang_verror (0, "%s: CreateProcess failed.", cmd);
- return -1;
- }
-
- status = -1;
-
- if (0xFFFFFFFFUL != WaitForSingleObject (process_info.hProcess, INFINITE))
- {
- DWORD exit_code;
-
- if (TRUE == GetExitCodeProcess (process_info.hProcess, &exit_code))
- status = (int) exit_code;
- }
-
- CloseHandle (process_info.hThread);
- CloseHandle (process_info.hProcess);
-
- return status;
-}
-#endif
diff --git a/mdk-stage1/slang/slsmg.c b/mdk-stage1/slang/slsmg.c
deleted file mode 100644
index 088557f27..000000000
--- a/mdk-stage1/slang/slsmg.c
+++ /dev/null
@@ -1,1584 +0,0 @@
-/* SLang Screen management routines */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct Screen_Type
- {
- int n; /* number of chars written last time */
- int flags; /* line untouched, etc... */
- SLsmg_Char_Type *old, *neew;
-#ifndef IBMPC_SYSTEM
- unsigned long old_hash, new_hash;
-#endif
- }
-Screen_Type;
-
-#define TOUCHED 0x1
-#define TRASHED 0x2
-static int Screen_Trashed;
-
-#if !defined(__MSDOS_16BIT__)
-# define MAX_SCREEN_SIZE 256
-#else
-# define MAX_SCREEN_SIZE 75
-#endif
-
-Screen_Type SL_Screen[MAX_SCREEN_SIZE];
-static int Start_Col, Start_Row;
-static int Screen_Cols, Screen_Rows;
-static int This_Row, This_Col;
-static int This_Color; /* only the first 8 bits of this
- * are used. The highest bit is used
- * to indicate an alternate character
- * set. This leaves 127 userdefineable
- * color combination.
- */
-
-#ifndef IBMPC_SYSTEM
-#define ALT_CHAR_FLAG 0x80
-#else
-#define ALT_CHAR_FLAG 0x00
-#endif
-
-#if SLTT_HAS_NON_BCE_SUPPORT && !defined(IBMPC_SYSTEM)
-#define REQUIRES_NON_BCE_SUPPORT 1
-static int Bce_Color_Offset;
-#endif
-
-int SLsmg_Newline_Behavior = 0;
-int SLsmg_Backspace_Moves = 0;
-/* Backward compatibility. Not used. */
-/* int SLsmg_Newline_Moves; */
-
-static void (*tt_normal_video)(void) = SLtt_normal_video;
-static void (*tt_goto_rc)(int, int) = SLtt_goto_rc;
-static void (*tt_cls) (void) = SLtt_cls;
-static void (*tt_del_eol) (void) = SLtt_del_eol;
-static void (*tt_smart_puts) (SLsmg_Char_Type *, SLsmg_Char_Type *, int, int) = SLtt_smart_puts;
-static int (*tt_flush_output) (void) = SLtt_flush_output;
-static int (*tt_reset_video) (void) = SLtt_reset_video;
-static int (*tt_init_video) (void) = SLtt_init_video;
-static int *tt_Screen_Rows = &SLtt_Screen_Rows;
-static int *tt_Screen_Cols = &SLtt_Screen_Cols;
-
-#ifndef IBMPC_SYSTEM
-static void (*tt_set_scroll_region)(int, int) = SLtt_set_scroll_region;
-static void (*tt_reverse_index)(int) = SLtt_reverse_index;
-static void (*tt_reset_scroll_region)(void) = SLtt_reset_scroll_region;
-static void (*tt_delete_nlines)(int) = SLtt_delete_nlines;
-#endif
-
-#ifndef IBMPC_SYSTEM
-static int *tt_Term_Cannot_Scroll = &SLtt_Term_Cannot_Scroll;
-static int *tt_Has_Alt_Charset = &SLtt_Has_Alt_Charset;
-static char **tt_Graphics_Char_Pairs = &SLtt_Graphics_Char_Pairs;
-static int *tt_Use_Blink_For_ACS = &SLtt_Use_Blink_For_ACS;
-#endif
-
-static int Smg_Inited;
-
-static void blank_line (SLsmg_Char_Type *p, int n, unsigned char ch)
-{
- register SLsmg_Char_Type *pmax = p + n;
- register SLsmg_Char_Type color_ch;
-
- color_ch = SLSMG_BUILD_CHAR(ch,This_Color);
-
- while (p < pmax)
- {
- *p++ = color_ch;
- }
-}
-
-static void clear_region (int row, int n)
-{
- int i;
- int imax = row + n;
-
- if (imax > Screen_Rows) imax = Screen_Rows;
- for (i = row; i < imax; i++)
- {
- if (i >= 0)
- {
- blank_line (SL_Screen[i].neew, Screen_Cols, ' ');
- SL_Screen[i].flags |= TOUCHED;
- }
- }
-}
-
-void SLsmg_erase_eol (void)
-{
- int r, c;
-
- if (Smg_Inited == 0) return;
-
- c = This_Col - Start_Col;
- r = This_Row - Start_Row;
-
- if ((r < 0) || (r >= Screen_Rows)) return;
- if (c < 0) c = 0; else if (c >= Screen_Cols) return;
- blank_line (SL_Screen[This_Row].neew + c , Screen_Cols - c, ' ');
- SL_Screen[This_Row].flags |= TOUCHED;
-}
-
-static void scroll_up (void)
-{
- unsigned int i, imax;
- SLsmg_Char_Type *neew;
-
- neew = SL_Screen[0].neew;
- imax = Screen_Rows - 1;
- for (i = 0; i < imax; i++)
- {
- SL_Screen[i].neew = SL_Screen[i + 1].neew;
- SL_Screen[i].flags |= TOUCHED;
- }
- SL_Screen[i].neew = neew;
- SL_Screen[i].flags |= TOUCHED;
- blank_line (neew, Screen_Cols, ' ');
- This_Row--;
-}
-
-void SLsmg_gotorc (int r, int c)
-{
- This_Row = r;
- This_Col = c;
-}
-
-int SLsmg_get_row (void)
-{
- return This_Row;
-}
-
-int SLsmg_get_column (void)
-{
- return This_Col;
-}
-
-void SLsmg_erase_eos (void)
-{
- if (Smg_Inited == 0) return;
-
- SLsmg_erase_eol ();
- clear_region (This_Row + 1, Screen_Rows);
-}
-
-static int This_Alt_Char;
-
-void SLsmg_set_char_set (int i)
-{
-#ifdef IBMPC_SYSTEM
- (void) i;
-#else
- if ((tt_Use_Blink_For_ACS != NULL)
- && (*tt_Use_Blink_For_ACS != 0))
- return;/* alt chars not used and the alt bit
- * is used to indicate a blink.
- */
-
- if (i) This_Alt_Char = ALT_CHAR_FLAG;
- else This_Alt_Char = 0;
-
- This_Color &= 0x7F;
- This_Color |= This_Alt_Char;
-#endif
-}
-
-void SLsmg_set_color (int color)
-{
- if (color < 0) return;
-#ifdef REQUIRES_NON_BCE_SUPPORT
- color += Bce_Color_Offset;
-#endif
- This_Color = color | This_Alt_Char;
-}
-
-void SLsmg_reverse_video (void)
-{
- SLsmg_set_color (1);
-}
-
-void SLsmg_normal_video (void)
-{
- SLsmg_set_color (0);
-}
-
-static int point_visible (int col_too)
-{
- return ((This_Row >= Start_Row) && (This_Row < Start_Row + Screen_Rows)
- && ((col_too == 0)
- || ((This_Col >= Start_Col)
- && (This_Col < Start_Col + Screen_Cols))));
-}
-
-void SLsmg_write_string (char *str)
-{
- SLsmg_write_nchars (str, strlen (str));
-}
-
-void SLsmg_write_nstring (char *str, unsigned int n)
-{
- unsigned int width;
- char blank = ' ';
-
- /* Avoid a problem if a user accidently passes a negative value */
- if ((int) n < 0)
- return;
-
- if (str == NULL) width = 0;
- else
- {
- width = strlen (str);
- if (width > n) width = n;
- SLsmg_write_nchars (str, width);
- }
- while (width++ < n) SLsmg_write_nchars (&blank, 1);
-}
-
-void SLsmg_write_wrapped_string (char *s, int r, int c,
- unsigned int dr, unsigned int dc,
- int fill)
-{
- register char ch, *p;
- int maxc = (int) dc;
-
- if ((dr == 0) || (dc == 0)) return;
- p = s;
- dc = 0;
- while (1)
- {
- ch = *p++;
- if ((ch == 0) || (ch == '\n'))
- {
- int diff;
-
- diff = maxc - (int) dc;
-
- SLsmg_gotorc (r, c);
- SLsmg_write_nchars (s, dc);
- if (fill && (diff > 0))
- {
- while (diff--) SLsmg_write_char (' ');
- }
- if ((ch == 0) || (dr == 1)) break;
-
- r++;
- dc = 0;
- dr--;
- s = p;
- }
- else if ((int) dc == maxc)
- {
- SLsmg_gotorc (r, c);
- SLsmg_write_nchars (s, dc + 1);
- if (dr == 1) break;
-
- r++;
- dc = 0;
- dr--;
- s = p;
- }
- else dc++;
- }
-}
-
-int SLsmg_Tab_Width = 8;
-
-/* Minimum value for which eight bit char is displayed as is. */
-
-#ifndef IBMPC_SYSTEM
-int SLsmg_Display_Eight_Bit = 160;
-static unsigned char Alt_Char_Set[129];/* 129th is used as a flag */
-#else
-int SLsmg_Display_Eight_Bit = 128;
-#endif
-
-void SLsmg_write_nchars (char *str, unsigned int n)
-{
- register SLsmg_Char_Type *p, old, neew, color;
- unsigned char ch;
- unsigned int flags;
- int len, start_len, max_len;
- char *str_max;
- int newline_flag;
-#ifndef IBMPC_SYSTEM
- int alt_char_set_flag;
-
- alt_char_set_flag = ((This_Color & ALT_CHAR_FLAG)
- && ((tt_Use_Blink_For_ACS == NULL)
- || (*tt_Use_Blink_For_ACS == 0)));
-#endif
-
- if (Smg_Inited == 0) return;
-
- str_max = str + n;
- color = This_Color;
-
- top: /* get here only on newline */
-
- newline_flag = 0;
- start_len = Start_Col;
-
- if (point_visible (0) == 0) return;
-
- len = This_Col;
- max_len = start_len + Screen_Cols;
-
- p = SL_Screen[This_Row - Start_Row].neew;
- if (len > start_len) p += (len - start_len);
-
- flags = SL_Screen[This_Row - Start_Row].flags;
- while ((len < max_len) && (str < str_max))
- {
- ch = (unsigned char) *str++;
-
-#ifndef IBMPC_SYSTEM
- if (alt_char_set_flag)
- ch = Alt_Char_Set [ch & 0x7F];
-#endif
- if (((ch >= ' ') && (ch < 127))
- || (ch >= (unsigned char) SLsmg_Display_Eight_Bit)
-#ifndef IBMPC_SYSTEM
- || alt_char_set_flag
-#endif
- )
- {
- len += 1;
- if (len > start_len)
- {
- old = *p;
- neew = SLSMG_BUILD_CHAR(ch,color);
- if (old != neew)
- {
- flags |= TOUCHED;
- *p = neew;
- }
- p++;
- }
- }
-
- else if ((ch == '\t') && (SLsmg_Tab_Width > 0))
- {
- n = len;
- n += SLsmg_Tab_Width;
- n = SLsmg_Tab_Width - (n % SLsmg_Tab_Width);
- if ((unsigned int) len + n > (unsigned int) max_len)
- n = (unsigned int) (max_len - len);
- neew = SLSMG_BUILD_CHAR(' ',color);
- while (n--)
- {
- len += 1;
- if (len > start_len)
- {
- if (*p != neew)
- {
- flags |= TOUCHED;
- *p = neew;
- }
- p++;
- }
- }
- }
- else if ((ch == '\n')
- && (SLsmg_Newline_Behavior != SLSMG_NEWLINE_PRINTABLE))
- {
- newline_flag = 1;
- break;
- }
- else if ((ch == 0x8) && SLsmg_Backspace_Moves)
- {
- if (len != 0) len--;
- }
- else
- {
- if (ch & 0x80)
- {
- neew = SLSMG_BUILD_CHAR('~',color);
- len += 1;
- if (len > start_len)
- {
- if (*p != neew)
- {
- *p = neew;
- flags |= TOUCHED;
- }
- p++;
- if (len == max_len) break;
- ch &= 0x7F;
- }
- }
-
- len += 1;
- if (len > start_len)
- {
- neew = SLSMG_BUILD_CHAR('^',color);
- if (*p != neew)
- {
- *p = neew;
- flags |= TOUCHED;
- }
- p++;
- if (len == max_len) break;
- }
-
- if (ch == 127) ch = '?'; else ch = ch + '@';
- len++;
- if (len > start_len)
- {
- neew = SLSMG_BUILD_CHAR(ch,color);
- if (*p != neew)
- {
- *p = neew;
- flags |= TOUCHED;
- }
- p++;
- }
- }
- }
-
- SL_Screen[This_Row - Start_Row].flags = flags;
- This_Col = len;
-
- if (SLsmg_Newline_Behavior == 0)
- return;
-
- if (newline_flag == 0)
- {
- while (str < str_max)
- {
- if (*str == '\n') break;
- str++;
- }
- if (str == str_max) return;
- str++;
- }
-
- This_Row++;
- This_Col = 0;
- if (This_Row == Start_Row + Screen_Rows)
- {
- if (SLsmg_Newline_Behavior == SLSMG_NEWLINE_SCROLLS) scroll_up ();
- }
- goto top;
-}
-
-void SLsmg_write_char (char ch)
-{
- SLsmg_write_nchars (&ch, 1);
-}
-
-static int Cls_Flag;
-
-void SLsmg_cls (void)
-{
- int tac;
- if (Smg_Inited == 0) return;
-
- tac = This_Alt_Char; This_Alt_Char = 0;
- SLsmg_set_color (0);
- clear_region (0, Screen_Rows);
- This_Alt_Char = tac;
- SLsmg_set_color (0);
- Cls_Flag = 1;
-}
-#if 0
-static void do_copy (SLsmg_Char_Type *a, SLsmg_Char_Type *b)
-{
- SLsmg_Char_Type *amax = a + Screen_Cols;
-
- while (a < amax) *a++ = *b++;
-}
-#endif
-
-#ifndef IBMPC_SYSTEM
-int SLsmg_Scroll_Hash_Border = 0;
-static unsigned long compute_hash (SLsmg_Char_Type *s, int n)
-{
- register unsigned long h = 0, g;
- register unsigned long sum = 0;
- register SLsmg_Char_Type *smax, ch;
- int is_blank = 2;
-
- s += SLsmg_Scroll_Hash_Border;
- smax = s + (n - SLsmg_Scroll_Hash_Border);
- while (s < smax)
- {
- ch = *s++;
- if (is_blank && (SLSMG_EXTRACT_CHAR(ch) != 32)) is_blank--;
-
- sum += ch;
-
- h = sum + (h << 3);
- if ((g = h & 0xE0000000UL) != 0)
- {
- h = h ^ (g >> 24);
- h = h ^ g;
- }
- }
- if (is_blank) return 0;
- return h;
-}
-
-static unsigned long Blank_Hash;
-
-static int try_scroll_down (int rmin, int rmax)
-{
- int i, r1, r2, di, j;
- unsigned long hash;
- int did_scroll;
- int color;
- SLsmg_Char_Type *tmp;
- int ignore;
-
- did_scroll = 0;
- for (i = rmax; i > rmin; i--)
- {
- hash = SL_Screen[i].new_hash;
- if (hash == Blank_Hash) continue;
-
- if ((hash == SL_Screen[i].old_hash)
-#if 0
- || ((i + 1 < Screen_Rows) && (hash == SL_Screen[i + 1].old_hash))
- || ((i - 1 > rmin) && (SL_Screen[i].old_hash == SL_Screen[i - 1].new_hash))
-#endif
- )
- continue;
-
- for (j = i - 1; j >= rmin; j--)
- {
- if (hash == SL_Screen[j].old_hash) break;
- }
- if (j < rmin) continue;
-
- r2 = i; /* end scroll region */
-
- di = i - j;
- j--;
- ignore = 0;
- while ((j >= rmin) && (SL_Screen[j].old_hash == SL_Screen[j + di].new_hash))
- {
- if (SL_Screen[j].old_hash == Blank_Hash) ignore++;
- j--;
- }
- r1 = j + 1;
-
- /* If this scroll only scrolls this line into place, don't do it.
- */
- if ((di > 1) && (r1 + di + ignore == r2)) continue;
-
- /* If there is anything in the scrolling region that is ok, abort the
- * scroll.
- */
-
- for (j = r1; j <= r2; j++)
- {
- if ((SL_Screen[j].old_hash != Blank_Hash)
- && (SL_Screen[j].old_hash == SL_Screen[j].new_hash))
- {
- /* See if the scroll is happens to scroll this one into place. */
- if ((j + di > r2) || (SL_Screen[j].old_hash != SL_Screen[j + di].new_hash))
- break;
- }
- }
- if (j <= r2) continue;
-
- color = This_Color; This_Color = 0;
- did_scroll = 1;
- (*tt_normal_video) ();
- (*tt_set_scroll_region) (r1, r2);
- (*tt_goto_rc) (0, 0);
- (*tt_reverse_index) (di);
- (*tt_reset_scroll_region) ();
- /* Now we have a hole in the screen.
- * Make the virtual screen look like it.
- *
- * Note that if the terminal does not support BCE, then we have
- * no idea what color the hole is. So, for this case, we do not
- * want to add Bce_Color_Offset to This_Color since if Bce_Color_Offset
- * is non-zero, then This_Color = 0 does not match any valid color
- * obtained by adding Bce_Color_Offset.
- */
- for (j = r1; j <= r2; j++) SL_Screen[j].flags = TOUCHED;
-
- while (di--)
- {
- tmp = SL_Screen[r2].old;
- for (j = r2; j > r1; j--)
- {
- SL_Screen[j].old = SL_Screen[j - 1].old;
- SL_Screen[j].old_hash = SL_Screen[j - 1].old_hash;
- }
- SL_Screen[r1].old = tmp;
- blank_line (SL_Screen[r1].old, Screen_Cols, ' ');
- SL_Screen[r1].old_hash = Blank_Hash;
- r1++;
- }
- This_Color = color;
- }
-
- return did_scroll;
-}
-
-static int try_scroll_up (int rmin, int rmax)
-{
- int i, r1, r2, di, j;
- unsigned long hash;
- int did_scroll;
- int color;
- SLsmg_Char_Type *tmp;
- int ignore;
-
- did_scroll = 0;
- for (i = rmin; i < rmax; i++)
- {
- hash = SL_Screen[i].new_hash;
- if (hash == Blank_Hash) continue;
- if (hash == SL_Screen[i].old_hash)
- continue;
- /* find a match further down screen */
- for (j = i + 1; j <= rmax; j++)
- {
- if (hash == SL_Screen[j].old_hash) break;
- }
- if (j > rmax) continue;
-
- r1 = i; /* beg scroll region */
- di = j - i; /* number of lines to scroll */
- j++; /* since we know this is a match */
-
- /* find end of scroll region */
- ignore = 0;
- while ((j <= rmax) && (SL_Screen[j].old_hash == SL_Screen[j - di].new_hash))
- {
- if (SL_Screen[j].old_hash == Blank_Hash) ignore++;
- j++;
- }
- r2 = j - 1; /* end of scroll region */
-
- /* If this scroll only scrolls this line into place, don't do it.
- */
- if ((di > 1) && (r1 + di + ignore == r2)) continue;
-
- /* If there is anything in the scrolling region that is ok, abort the
- * scroll.
- */
-
- for (j = r1; j <= r2; j++)
- {
- if ((SL_Screen[j].old_hash != Blank_Hash)
- && (SL_Screen[j].old_hash == SL_Screen[j].new_hash))
- {
- if ((j - di < r1) || (SL_Screen[j].old_hash != SL_Screen[j - di].new_hash))
- break;
- }
-
- }
- if (j <= r2) continue;
-
- did_scroll = 1;
-
- /* See the above comments about BCE */
- color = This_Color; This_Color = 0;
- (*tt_normal_video) ();
- (*tt_set_scroll_region) (r1, r2);
- (*tt_goto_rc) (0, 0); /* relative to scroll region */
- (*tt_delete_nlines) (di);
- (*tt_reset_scroll_region) ();
- /* Now we have a hole in the screen. Make the virtual screen look
- * like it.
- */
- for (j = r1; j <= r2; j++) SL_Screen[j].flags = TOUCHED;
-
- while (di--)
- {
- tmp = SL_Screen[r1].old;
- for (j = r1; j < r2; j++)
- {
- SL_Screen[j].old = SL_Screen[j + 1].old;
- SL_Screen[j].old_hash = SL_Screen[j + 1].old_hash;
- }
- SL_Screen[r2].old = tmp;
- blank_line (SL_Screen[r2].old, Screen_Cols, ' ');
- SL_Screen[r2].old_hash = Blank_Hash;
- r2--;
- }
- This_Color = color;
- }
- return did_scroll;
-}
-
-static void try_scroll (void)
-{
- int r1, rmin, rmax;
- int num_up, num_down;
- /* find region limits. */
-
- for (rmax = Screen_Rows - 1; rmax > 0; rmax--)
- {
- if (SL_Screen[rmax].new_hash != SL_Screen[rmax].old_hash)
- {
- r1 = rmax - 1;
- if ((r1 == 0)
- || (SL_Screen[r1].new_hash != SL_Screen[r1].old_hash))
- break;
-
- rmax = r1;
- }
- }
-
- for (rmin = 0; rmin < rmax; rmin++)
- {
- if (SL_Screen[rmin].new_hash != SL_Screen[rmin].old_hash)
- {
- r1 = rmin + 1;
- if ((r1 == rmax)
- || (SL_Screen[r1].new_hash != SL_Screen[r1].old_hash))
- break;
-
- rmin = r1;
- }
- }
-
- /* Below, we have two scrolling algorithms. The first has the effect of
- * scrolling lines down. This is usually appropriate when one moves
- * up the display, e.g., with the UP arrow. The second algorithm is
- * appropriate for going the other way. It is important to choose the
- * correct one.
- */
-
- num_up = 0;
- for (r1 = rmin; r1 < rmax; r1++)
- {
- if (SL_Screen[r1].new_hash == SL_Screen[r1 + 1].old_hash)
- num_up++;
- }
-
- num_down = 0;
- for (r1 = rmax; r1 > rmin; r1--)
- {
- if (SL_Screen[r1 - 1].old_hash == SL_Screen[r1].new_hash)
- num_down++;
- }
-
- if (num_up > num_down)
- {
- if (try_scroll_up (rmin, rmax))
- return;
-
- (void) try_scroll_down (rmin, rmax);
- }
- else
- {
- if (try_scroll_down (rmin, rmax))
- return;
-
- (void) try_scroll_up (rmin, rmax);
- }
-}
-#endif /* NOT IBMPC_SYSTEM */
-
-
-#ifdef REQUIRES_NON_BCE_SUPPORT
-static void adjust_colors (void)
-{
- int bce;
- int i;
-
- bce = Bce_Color_Offset;
- Bce_Color_Offset = _SLtt_get_bce_color_offset ();
- if (bce == Bce_Color_Offset)
- return;
-
- if ((tt_Use_Blink_For_ACS != NULL)
- && (*tt_Use_Blink_For_ACS != 0))
- return; /* this mode does not support non-BCE
- * terminals.
- */
-
- for (i = 0; i < Screen_Rows; i++)
- {
- SLsmg_Char_Type *s, *smax;
-
- SL_Screen[i].flags |= TRASHED;
- s = SL_Screen[i].neew;
- smax = s + Screen_Cols;
-
- while (s < smax)
- {
- int color = (int) SLSMG_EXTRACT_COLOR(*s);
- int acs;
-
- if (color < 0)
- {
- s++;
- continue;
- }
-
- acs = color & 0x80;
- color = (color & 0x7F) - bce;
- color += Bce_Color_Offset;
- if (color >= 0)
- {
- unsigned char ch = SLSMG_EXTRACT_CHAR(*s);
- *s = SLSMG_BUILD_CHAR(ch, ((color&0x7F)|acs));
- }
- s++;
- }
- }
-}
-#endif
-
-void SLsmg_refresh (void)
-{
- int i;
-#ifndef IBMPC_SYSTEM
- int trashed = 0;
-#endif
-
- if (Smg_Inited == 0) return;
-
- if (Screen_Trashed)
- {
- Cls_Flag = 1;
- for (i = 0; i < Screen_Rows; i++)
- SL_Screen[i].flags |= TRASHED;
-#ifdef REQUIRES_NON_BCE_SUPPORT
- adjust_colors ();
-#endif
- }
-
-#ifndef IBMPC_SYSTEM
- for (i = 0; i < Screen_Rows; i++)
- {
- if (SL_Screen[i].flags == 0) continue;
- SL_Screen[i].new_hash = compute_hash (SL_Screen[i].neew, Screen_Cols);
- trashed = 1;
- }
-#endif
-
- if (Cls_Flag)
- {
- (*tt_normal_video) (); (*tt_cls) ();
- }
-#ifndef IBMPC_SYSTEM
- else if (trashed && (*tt_Term_Cannot_Scroll == 0)) try_scroll ();
-#endif
-
- for (i = 0; i < Screen_Rows; i++)
- {
- if (SL_Screen[i].flags == 0) continue;
-
- if (Cls_Flag || SL_Screen[i].flags & TRASHED)
- {
- int color = This_Color;
-
- if (Cls_Flag == 0)
- {
- (*tt_goto_rc) (i, 0);
- (*tt_del_eol) ();
- }
- This_Color = 0;
- blank_line (SL_Screen[i].old, Screen_Cols, ' ');
- This_Color = color;
- }
-
- SL_Screen[i].old[Screen_Cols] = 0;
- SL_Screen[i].neew[Screen_Cols] = 0;
-
- (*tt_smart_puts) (SL_Screen[i].neew, SL_Screen[i].old, Screen_Cols, i);
-
- SLMEMCPY ((char *) SL_Screen[i].old, (char *) SL_Screen[i].neew,
- Screen_Cols * sizeof (SLsmg_Char_Type));
-
- SL_Screen[i].flags = 0;
-#ifndef IBMPC_SYSTEM
- SL_Screen[i].old_hash = SL_Screen[i].new_hash;
-#endif
- }
-
- if (point_visible (1)) (*tt_goto_rc) (This_Row - Start_Row, This_Col - Start_Col);
- (*tt_flush_output) ();
- Cls_Flag = 0;
- Screen_Trashed = 0;
-}
-
-static int compute_clip (int row, int n, int box_start, int box_end,
- int *rmin, int *rmax)
-{
- int row_max;
-
- if (n < 0) return 0;
- if (row >= box_end) return 0;
- row_max = row + n;
- if (row_max <= box_start) return 0;
-
- if (row < box_start) row = box_start;
- if (row_max >= box_end) row_max = box_end;
- *rmin = row;
- *rmax = row_max;
- return 1;
-}
-
-void SLsmg_touch_lines (int row, unsigned int n)
-{
- int i;
- int r1, r2;
-
- /* Allow this function to be called even when we are not initialied.
- * Calling this function is useful after calling SLtt_set_color
- * to force the display to be redrawn
- */
-
- if (Smg_Inited == 0)
- return;
-
- if (0 == compute_clip (row, (int) n, Start_Row, Start_Row + Screen_Rows, &r1, &r2))
- return;
-
- r1 -= Start_Row;
- r2 -= Start_Row;
- for (i = r1; i < r2; i++)
- {
- SL_Screen[i].flags |= TRASHED;
- }
-}
-
-void SLsmg_touch_screen (void)
-{
- Screen_Trashed = 1;
-}
-
-
-#ifndef IBMPC_SYSTEM
-static char Fake_Alt_Char_Pairs [] = "a:j+k+l+m+q-t+u+v+w+x|n+`+f\\g#~o,<+>.v-^h#0#";
-
-static void init_alt_char_set (void)
-{
- int i;
- unsigned char *p, *pmax, ch;
-
- if (Alt_Char_Set[128] == 128) return;
-
- i = 32;
- memset ((char *)Alt_Char_Set, ' ', i);
- while (i <= 128)
- {
- Alt_Char_Set [i] = i;
- i++;
- }
-
- /* Map to VT100 */
- if (*tt_Has_Alt_Charset)
- {
- if (tt_Graphics_Char_Pairs == NULL) p = NULL;
- else p = (unsigned char *) *tt_Graphics_Char_Pairs;
- if (p == NULL) return;
- }
- else p = (unsigned char *) Fake_Alt_Char_Pairs;
- pmax = p + strlen ((char *) p);
-
- /* Some systems have messed up entries for this */
- while (p < pmax)
- {
- ch = *p++;
- ch &= 0x7F; /* should be unnecessary */
- Alt_Char_Set [ch] = *p;
- p++;
- }
-}
-#endif
-
-#ifndef IBMPC_SYSTEM
-# define BLOCK_SIGNALS SLsig_block_signals ()
-# define UNBLOCK_SIGNALS SLsig_unblock_signals ()
-#else
-# define BLOCK_SIGNALS (void)0
-# define UNBLOCK_SIGNALS (void)0
-#endif
-
-static int Smg_Suspended;
-int SLsmg_suspend_smg (void)
-{
- BLOCK_SIGNALS;
-
- if (Smg_Suspended == 0)
- {
- (*tt_reset_video) ();
- Smg_Suspended = 1;
- }
-
- UNBLOCK_SIGNALS;
- return 0;
-}
-
-int SLsmg_resume_smg (void)
-{
- BLOCK_SIGNALS;
-
- if (Smg_Suspended == 0)
- {
- UNBLOCK_SIGNALS;
- return 0;
- }
-
- Smg_Suspended = 0;
-
- if (-1 == (*tt_init_video) ())
- {
- UNBLOCK_SIGNALS;
- return -1;
- }
-
- Cls_Flag = 1;
- SLsmg_touch_screen ();
- SLsmg_refresh ();
-
- UNBLOCK_SIGNALS;
- return 0;
-}
-
-
-static void reset_smg (void)
-{
- int i;
- if (Smg_Inited == 0)
- return;
-
- for (i = 0; i < Screen_Rows; i++)
- {
- SLfree ((char *)SL_Screen[i].old);
- SLfree ((char *)SL_Screen[i].neew);
- SL_Screen[i].old = SL_Screen[i].neew = NULL;
- }
- This_Alt_Char = This_Color = 0;
- Smg_Inited = 0;
-}
-
-
-static int init_smg (void)
-{
- int i, len;
- SLsmg_Char_Type *old, *neew;
-
- Smg_Inited = 0;
-
-#ifdef REQUIRES_NON_BCE_SUPPORT
- Bce_Color_Offset = _SLtt_get_bce_color_offset ();
-#endif
-
- Screen_Rows = *tt_Screen_Rows;
- if (Screen_Rows > MAX_SCREEN_SIZE)
- Screen_Rows = MAX_SCREEN_SIZE;
-
- Screen_Cols = *tt_Screen_Cols;
-
- This_Col = This_Row = Start_Col = Start_Row = 0;
-
- This_Alt_Char = 0;
- SLsmg_set_color (0);
- Cls_Flag = 1;
-#ifndef IBMPC_SYSTEM
- init_alt_char_set ();
-#endif
- len = Screen_Cols + 3;
- for (i = 0; i < Screen_Rows; i++)
- {
- if ((NULL == (old = (SLsmg_Char_Type *) SLmalloc (sizeof(SLsmg_Char_Type) * len)))
- || ((NULL == (neew = (SLsmg_Char_Type *) SLmalloc (sizeof(SLsmg_Char_Type) * len)))))
- {
- SLfree ((char *) old);
- return -1;
- }
- blank_line (old, len, ' ');
- blank_line (neew, len, ' ');
- SL_Screen[i].old = old;
- SL_Screen[i].neew = neew;
- SL_Screen[i].flags = 0;
-#ifndef IBMPC_SYSTEM
- Blank_Hash = compute_hash (old, Screen_Cols);
- SL_Screen[i].new_hash = SL_Screen[i].old_hash = Blank_Hash;
-#endif
- }
-
- _SLtt_color_changed_hook = SLsmg_touch_screen;
- Screen_Trashed = 1;
- Smg_Inited = 1;
- return 0;
-}
-
-
-int SLsmg_init_smg (void)
-{
- int ret;
-
- BLOCK_SIGNALS;
-
- if (Smg_Inited)
- SLsmg_reset_smg ();
-
- if (-1 == (*tt_init_video) ())
- {
- UNBLOCK_SIGNALS;
- return -1;
- }
-
- if (-1 == (ret = init_smg ()))
- (void) (*tt_reset_video)();
-
- UNBLOCK_SIGNALS;
- return ret;
-}
-
-int SLsmg_reinit_smg (void)
-{
- int ret;
-
- if (Smg_Inited == 0)
- return SLsmg_init_smg ();
-
- BLOCK_SIGNALS;
- reset_smg ();
- ret = init_smg ();
- UNBLOCK_SIGNALS;
- return ret;
-}
-
-void SLsmg_reset_smg (void)
-{
- if (Smg_Inited == 0)
- return;
-
- BLOCK_SIGNALS;
-
- reset_smg ();
- (*tt_reset_video)();
-
- UNBLOCK_SIGNALS;
-}
-
-SLsmg_Char_Type SLsmg_char_at (void)
-{
- if (Smg_Inited == 0) return 0;
-
- if (point_visible (1))
- {
- return SL_Screen[This_Row - Start_Row].neew[This_Col - Start_Col];
- }
- return 0;
-}
-
-void SLsmg_vprintf (char *fmt, va_list ap)
-{
- char buf[1024];
-
- if (Smg_Inited == 0) return;
-
- (void) _SLvsnprintf (buf, sizeof (buf), fmt, ap);
- SLsmg_write_string (buf);
-}
-
-void SLsmg_printf (char *fmt, ...)
-{
- va_list ap;
- unsigned int len;
- char *f;
-
- if (Smg_Inited == 0) return;
-
- va_start(ap, fmt);
-
- f = fmt;
- while (*f && (*f != '%'))
- f++;
- len = (unsigned int) (f - fmt);
- if (len) SLsmg_write_nchars (fmt, len);
-
- if (*f != 0)
- SLsmg_vprintf (f, ap);
-
- va_end (ap);
-}
-
-void SLsmg_set_screen_start (int *r, int *c)
-{
- int orow = Start_Row, oc = Start_Col;
-
- if (Smg_Inited == 0) return;
-
- if (c == NULL) Start_Col = 0;
- else
- {
- Start_Col = *c;
- *c = oc;
- }
- if (r == NULL) Start_Row = 0;
- else
- {
- Start_Row = *r;
- *r = orow;
- }
-}
-
-void SLsmg_draw_object (int r, int c, unsigned char object)
-{
- This_Row = r; This_Col = c;
-
- if (Smg_Inited == 0) return;
-
- if (point_visible (1))
- {
- int color = This_Color;
- This_Color |= ALT_CHAR_FLAG;
- SLsmg_write_char (object);
- This_Color = color;
- }
-
- This_Col = c + 1;
-}
-
-void SLsmg_draw_hline (unsigned int n)
-{
- static unsigned char hbuf[16];
- int count;
- int cmin, cmax;
- int final_col = This_Col + (int) n;
- int save_color;
-
- if (Smg_Inited == 0) return;
-
- if ((This_Row < Start_Row) || (This_Row >= Start_Row + Screen_Rows)
- || (0 == compute_clip (This_Col, n, Start_Col, Start_Col + Screen_Cols,
- &cmin, &cmax)))
- {
- This_Col = final_col;
- return;
- }
-
- if (hbuf[0] == 0)
- {
- SLMEMSET ((char *) hbuf, SLSMG_HLINE_CHAR, 16);
- }
-
- n = (unsigned int)(cmax - cmin);
- count = n / 16;
-
- save_color = This_Color;
- This_Color |= ALT_CHAR_FLAG;
- This_Col = cmin;
-
- SLsmg_write_nchars ((char *) hbuf, n % 16);
- while (count-- > 0)
- {
- SLsmg_write_nchars ((char *) hbuf, 16);
- }
-
- This_Color = save_color;
- This_Col = final_col;
-}
-
-void SLsmg_draw_vline (int n)
-{
- unsigned char ch = SLSMG_VLINE_CHAR;
- int c = This_Col, rmin, rmax;
- int final_row = This_Row + n;
- int save_color;
-
- if (Smg_Inited == 0) return;
-
- if (((c < Start_Col) || (c >= Start_Col + Screen_Cols)) ||
- (0 == compute_clip (This_Row, n, Start_Row, Start_Row + Screen_Rows,
- &rmin, &rmax)))
- {
- This_Row = final_row;
- return;
- }
-
- save_color = This_Color;
- This_Color |= ALT_CHAR_FLAG;
-
- for (This_Row = rmin; This_Row < rmax; This_Row++)
- {
- This_Col = c;
- SLsmg_write_nchars ((char *) &ch, 1);
- }
-
- This_Col = c; This_Row = final_row;
- This_Color = save_color;
-}
-
-void SLsmg_draw_box (int r, int c, unsigned int dr, unsigned int dc)
-{
- if (Smg_Inited == 0) return;
-
- if (!dr || !dc) return;
- This_Row = r; This_Col = c;
- dr--; dc--;
- SLsmg_draw_hline (dc);
- SLsmg_draw_vline (dr);
- This_Row = r; This_Col = c;
- SLsmg_draw_vline (dr);
- SLsmg_draw_hline (dc);
- SLsmg_draw_object (r, c, SLSMG_ULCORN_CHAR);
- SLsmg_draw_object (r, c + (int) dc, SLSMG_URCORN_CHAR);
- SLsmg_draw_object (r + (int) dr, c, SLSMG_LLCORN_CHAR);
- SLsmg_draw_object (r + (int) dr, c + (int) dc, SLSMG_LRCORN_CHAR);
- This_Row = r; This_Col = c;
-}
-
-void SLsmg_fill_region (int r, int c, unsigned int dr, unsigned int dc, unsigned char ch)
-{
- static unsigned char hbuf[16];
- int count;
- int dcmax, rmax;
-
- if (Smg_Inited == 0) return;
-
- SLsmg_gotorc (r, c);
- r = This_Row; c = This_Col;
-
- dcmax = Screen_Cols - This_Col;
- if (dcmax < 0)
- return;
-
- if (dc > (unsigned int) dcmax) dc = (unsigned int) dcmax;
-
- rmax = This_Row + dr;
- if (rmax > Screen_Rows) rmax = Screen_Rows;
-
-#if 0
- ch = Alt_Char_Set[ch];
-#endif
- if (ch != hbuf[0]) SLMEMSET ((char *) hbuf, (char) ch, 16);
-
- for (This_Row = r; This_Row < rmax; This_Row++)
- {
- This_Col = c;
- count = dc / 16;
- SLsmg_write_nchars ((char *) hbuf, dc % 16);
- while (count-- > 0)
- {
- SLsmg_write_nchars ((char *) hbuf, 16);
- }
- }
-
- This_Row = r;
-}
-
-void SLsmg_forward (int n)
-{
- This_Col += n;
-}
-
-void SLsmg_write_color_chars (SLsmg_Char_Type *s, unsigned int len)
-{
- SLsmg_Char_Type *smax, sh;
- char buf[32], *b, *bmax;
- int color, save_color;
-
- if (Smg_Inited == 0) return;
-
- smax = s + len;
- b = buf;
- bmax = b + sizeof (buf);
-
- save_color = This_Color;
-
- while (s < smax)
- {
- sh = *s++;
-
- color = SLSMG_EXTRACT_COLOR(sh);
-
-#if REQUIRES_NON_BCE_SUPPORT
- if (Bce_Color_Offset)
- {
- if (color & 0x80)
- color = ((color & 0x7F) + Bce_Color_Offset) | 0x80;
- else
- color = ((color & 0x7F) + Bce_Color_Offset) & 0x7F;
- }
-#endif
-
- if ((color != This_Color) || (b == bmax))
- {
- if (b != buf)
- {
- SLsmg_write_nchars (buf, (int) (b - buf));
- b = buf;
- }
- This_Color = color;
- }
- *b++ = (char) SLSMG_EXTRACT_CHAR(sh);
- }
-
- if (b != buf)
- SLsmg_write_nchars (buf, (unsigned int) (b - buf));
-
- This_Color = save_color;
-}
-
-unsigned int SLsmg_read_raw (SLsmg_Char_Type *buf, unsigned int len)
-{
- unsigned int r, c;
-
- if (Smg_Inited == 0) return 0;
-
- if (0 == point_visible (1)) return 0;
-
- r = (unsigned int) (This_Row - Start_Row);
- c = (unsigned int) (This_Col - Start_Col);
-
- if (c + len > (unsigned int) Screen_Cols)
- len = (unsigned int) Screen_Cols - c;
-
- memcpy ((char *) buf, (char *) (SL_Screen[r].neew + c), len * sizeof (SLsmg_Char_Type));
- return len;
-}
-
-unsigned int SLsmg_write_raw (SLsmg_Char_Type *buf, unsigned int len)
-{
- unsigned int r, c;
- SLsmg_Char_Type *dest;
-
- if (Smg_Inited == 0) return 0;
-
- if (0 == point_visible (1)) return 0;
-
- r = (unsigned int) (This_Row - Start_Row);
- c = (unsigned int) (This_Col - Start_Col);
-
- if (c + len > (unsigned int) Screen_Cols)
- len = (unsigned int) Screen_Cols - c;
-
- dest = SL_Screen[r].neew + c;
-
- if (0 != memcmp ((char *) dest, (char *) buf, len * sizeof (SLsmg_Char_Type)))
- {
- memcpy ((char *) dest, (char *) buf, len * sizeof (SLsmg_Char_Type));
- SL_Screen[r].flags |= TOUCHED;
- }
- return len;
-}
-
-void
-SLsmg_set_color_in_region (int color, int r, int c, unsigned int dr, unsigned int dc)
-{
- int cmax, rmax;
- SLsmg_Char_Type char_mask;
-
- if (Smg_Inited == 0) return;
-
- c -= Start_Col;
- r -= Start_Row;
-
- cmax = c + (int) dc;
- rmax = r + (int) dr;
-
- if (cmax > Screen_Cols) cmax = Screen_Cols;
- if (rmax > Screen_Rows) rmax = Screen_Rows;
-
- if (c < 0) c = 0;
- if (r < 0) r = 0;
-
-#if REQUIRES_NON_BCE_SUPPORT
- if (Bce_Color_Offset)
- {
- if (color & 0x80)
- color = ((color & 0x7F) + Bce_Color_Offset) | 0x80;
- else
- color = ((color & 0x7F) + Bce_Color_Offset) & 0x7F;
- }
-#endif
- color = color << 8;
-
- char_mask = 0xFF;
-
-#ifndef IBMPC_SYSTEM
- if ((tt_Use_Blink_For_ACS == NULL)
- || (0 == *tt_Use_Blink_For_ACS))
- char_mask = 0x80FF;
-#endif
-
- while (r < rmax)
- {
- SLsmg_Char_Type *s, *smax;
-
- SL_Screen[r].flags |= TOUCHED;
- s = SL_Screen[r].neew;
- smax = s + cmax;
- s += c;
-
- while (s < smax)
- {
- *s = (*s & char_mask) | color;
- s++;
- }
- r++;
- }
-}
-
-void SLsmg_set_terminal_info (SLsmg_Term_Type *tt)
-{
- if (tt == NULL) /* use default */
- return;
-
- if ((tt->tt_normal_video == NULL)
- || (tt->tt_goto_rc == NULL)
- || (tt->tt_cls == NULL)
- || (tt->tt_del_eol == NULL)
- || (tt->tt_smart_puts == NULL)
- || (tt->tt_flush_output == NULL)
- || (tt->tt_reset_video == NULL)
- || (tt->tt_init_video == NULL)
-#ifndef IBMPC_SYSTEM
- || (tt->tt_set_scroll_region == NULL)
- || (tt->tt_reverse_index == NULL)
- || (tt->tt_reset_scroll_region == NULL)
- || (tt->tt_delete_nlines == NULL)
- /* Variables */
- || (tt->tt_term_cannot_scroll == NULL)
- || (tt->tt_has_alt_charset == NULL)
-#if 0 /* These can be NULL */
- || (tt->tt_use_blink_for_acs == NULL)
- || (tt->tt_graphic_char_pairs == NULL)
-#endif
- || (tt->tt_screen_cols == NULL)
- || (tt->tt_screen_rows == NULL)
-#endif
- )
- SLang_exit_error ("Terminal not powerful enough for SLsmg");
-
- tt_normal_video = tt->tt_normal_video;
- tt_goto_rc = tt->tt_goto_rc;
- tt_cls = tt->tt_cls;
- tt_del_eol = tt->tt_del_eol;
- tt_smart_puts = tt->tt_smart_puts;
- tt_flush_output = tt->tt_flush_output;
- tt_reset_video = tt->tt_reset_video;
- tt_init_video = tt->tt_init_video;
-
-#ifndef IBMPC_SYSTEM
- tt_set_scroll_region = tt->tt_set_scroll_region;
- tt_reverse_index = tt->tt_reverse_index;
- tt_reset_scroll_region = tt->tt_reset_scroll_region;
- tt_delete_nlines = tt->tt_delete_nlines;
-
- tt_Term_Cannot_Scroll = tt->tt_term_cannot_scroll;
- tt_Has_Alt_Charset = tt->tt_has_alt_charset;
- tt_Use_Blink_For_ACS = tt->tt_use_blink_for_acs;
- tt_Graphics_Char_Pairs = tt->tt_graphic_char_pairs;
-#endif
-
- tt_Screen_Cols = tt->tt_screen_cols;
- tt_Screen_Rows = tt->tt_screen_rows;
-}
-
diff --git a/mdk-stage1/slang/slstd.c b/mdk-stage1/slang/slstd.c
deleted file mode 100644
index b05dfcddb..000000000
--- a/mdk-stage1/slang/slstd.c
+++ /dev/null
@@ -1,724 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* Standard intrinsic functions for S-Lang. Included here are string
- and array operations */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-/*{{{ Include Files */
-
-#include <time.h>
-
-#ifndef __QNX__
-# if defined(__GO32__) || defined(__WATCOMC__)
-# include <dos.h>
-# include <bios.h>
-# endif
-#endif
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-/*}}}*/
-
-/* builtin stack manipulation functions */
-int SLdo_pop(void) /*{{{*/
-{
- return SLdo_pop_n (1);
-}
-
-/*}}}*/
-
-int SLdo_pop_n (unsigned int n)
-{
- SLang_Object_Type x;
-
- while (n--)
- {
- if (SLang_pop(&x)) return -1;
- SLang_free_object (&x);
- }
-
- return 0;
-}
-
-static void do_dup(void) /*{{{*/
-{
- (void) SLdup_n (1);
-}
-
-/*}}}*/
-
-static int length_cmd (void)
-{
- SLang_Class_Type *cl;
- SLang_Object_Type obj;
- VOID_STAR p;
- unsigned int length;
- int len;
-
- if (-1 == SLang_pop (&obj))
- return -1;
-
- cl = _SLclass_get_class (obj.data_type);
- p = _SLclass_get_ptr_to_value (cl, &obj);
-
- len = 1;
- if (cl->cl_length != NULL)
- {
- if (0 == (*cl->cl_length)(obj.data_type, p, &length))
- len = (int) length;
- else
- len = -1;
- }
-
- SLang_free_object (&obj);
- return len;
-}
-
-/* convert integer to a string of length 1 */
-static void char_cmd (int *x) /*{{{*/
-{
- char ch, buf[2];
-
- ch = (char) *x;
- buf[0] = ch;
- buf[1] = 0;
- SLang_push_string (buf);
-}
-
-/*}}}*/
-
-/* format object into a string and returns slstring */
-char *_SLstringize_object (SLang_Object_Type *obj) /*{{{*/
-{
- SLang_Class_Type *cl;
- unsigned char stype;
- VOID_STAR p;
- char *s, *s1;
-
- stype = obj->data_type;
- p = (VOID_STAR) &obj->v.ptr_val;
-
- cl = _SLclass_get_class (stype);
-
- s = (*cl->cl_string) (stype, p);
- if (s != NULL)
- {
- s1 = SLang_create_slstring (s);
- SLfree (s);
- s = s1;
- }
- return s;
-}
-/*}}}*/
-
-int SLang_run_hooks(char *hook, unsigned int num_args, ...)
-{
- unsigned int i;
- va_list ap;
-
- if (SLang_Error) return -1;
-
- if (0 == SLang_is_defined (hook))
- return 0;
-
- (void) SLang_start_arg_list ();
- va_start (ap, num_args);
- for (i = 0; i < num_args; i++)
- {
- char *arg;
-
- arg = va_arg (ap, char *);
- if (-1 == SLang_push_string (arg))
- break;
- }
- va_end (ap);
- (void) SLang_end_arg_list ();
-
- if (SLang_Error) return -1;
- return SLang_execute_function (hook);
-}
-
-static void intrin_getenv_cmd (char *s)
-{
- SLang_push_string (getenv (s));
-}
-
-#ifdef HAVE_PUTENV
-static void intrin_putenv (void) /*{{{*/
-{
- char *s;
-
- /* Some putenv implementations required malloced strings. */
- if (SLpop_string(&s)) return;
-
- if (putenv (s))
- {
- SLang_Error = SL_INTRINSIC_ERROR;
- SLfree (s);
- }
-
- /* Note that s is NOT freed */
-}
-
-/*}}}*/
-
-#endif
-
-static void lang_print_stack (void) /*{{{*/
-{
- char buf[32];
- unsigned int n;
-
- n = (unsigned int) (_SLStack_Pointer - _SLRun_Stack);
- while (n)
- {
- n--;
- sprintf (buf, "(%u)", n);
- _SLdump_objects (buf, _SLRun_Stack + n, 1, 1);
- }
-}
-
-/*}}}*/
-
-static void byte_compile_file (char *f, int *m)
-{
- SLang_byte_compile_file (f, *m);
-}
-
-static void intrin_type_info1 (void)
-{
- SLang_Object_Type obj;
- unsigned int type;
-
- if (-1 == SLang_pop (&obj))
- return;
-
- type = obj.data_type;
- if (type == SLANG_ARRAY_TYPE)
- type = obj.v.array_val->data_type;
-
- SLang_free_object (&obj);
-
- _SLang_push_datatype (type);
-}
-
-static void intrin_type_info (void)
-{
- SLang_Object_Type obj;
-
- if (-1 == SLang_pop (&obj))
- return;
-
- _SLang_push_datatype (obj.data_type);
- SLang_free_object (&obj);
-}
-
-void _SLstring_intrinsic (void) /*{{{*/
-{
- SLang_Object_Type x;
- char *s;
-
- if (SLang_pop (&x)) return;
- if (NULL != (s = _SLstringize_object (&x)))
- _SLang_push_slstring (s);
-
- SLang_free_object (&x);
-}
-
-/*}}}*/
-
-static void intrin_typecast (void)
-{
- unsigned char to_type;
- if (0 == _SLang_pop_datatype (&to_type))
- (void) SLclass_typecast (to_type, 0, 1);
-}
-
-#if SLANG_HAS_FLOAT
-static void intrin_double (void)
-{
- (void) SLclass_typecast (SLANG_DOUBLE_TYPE, 0, 1);
-}
-
-#endif
-
-static void intrin_int (void) /*{{{*/
-{
- (void) SLclass_typecast (SLANG_INT_TYPE, 0, 1);
-}
-
-/*}}}*/
-
-static char *
-intrin_function_name (void)
-{
- if (NULL == _SLang_Current_Function_Name)
- return "";
- return _SLang_Current_Function_Name;
-}
-
-static void intrin_message (char *s)
-{
- SLang_vmessage ("%s", s);
-}
-
-static void intrin_error (char *s)
-{
- SLang_verror (SL_USER_ERROR, "%s", s);
-}
-
-static void intrin_pop_n (int *n)
-{
- SLdo_pop_n ((unsigned int) *n);
-}
-
-static void intrin_reverse_stack (int *n)
-{
- SLreverse_stack (*n);
-}
-
-static void intrin_roll_stack (int *n)
-{
- SLroll_stack (*n);
-}
-
-static void usage (void)
-{
- char *msg;
-
- _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 1); /* do not include format */
-
- if (-1 == SLang_pop_slstring (&msg))
- return;
-
- SLang_verror (SL_USAGE_ERROR, "Usage: %s", msg);
- SLang_free_slstring (msg);
-}
-
-/* Convert string to integer */
-static int intrin_integer (char *s)
-{
- int i;
-
- i = SLatoi ((unsigned char *) s);
-
- if (SLang_Error)
- SLang_verror (SL_TYPE_MISMATCH, "Unable to convert string to integer");
- return i;
-}
-/*}}}*/
-
-static void guess_type (char *s)
-{
- _SLang_push_datatype (SLang_guess_type(s));
-}
-
-static int load_file (char *s)
-{
- if (-1 == SLang_load_file (s))
- return 0;
- return 1;
-}
-
-static void get_doc_string (char *file, char *topic)
-{
- FILE *fp;
- char line[1024];
- unsigned int topic_len, str_len;
- char *str;
- char ch;
-
- if (NULL == (fp = fopen (file, "r")))
- {
- SLang_push_null ();
- return;
- }
-
- topic_len = strlen (topic);
- ch = *topic;
-
- while (1)
- {
- if (NULL == fgets (line, sizeof(line), fp))
- {
- fclose (fp);
- (void) SLang_push_null ();
- return;
- }
-
- if ((ch == *line)
- && (0 == strncmp (line, topic, topic_len))
- && ((line[topic_len] == '\n') || (line [topic_len] == 0)
- || (line[topic_len] == ' ') || (line[topic_len] == '\t')))
- break;
- }
-
- if (NULL == (str = SLmake_string (line)))
- {
- fclose (fp);
- (void) SLang_push_null ();
- return;
- }
- str_len = strlen (str);
-
- while (NULL != fgets (line, sizeof (line), fp))
- {
- unsigned int len;
- char *new_str;
-
- ch = *line;
- if (ch == '#') continue;
- if (ch == '-') break;
-
- len = strlen (line);
- if (NULL == (new_str = SLrealloc (str, str_len + len + 1)))
- {
- SLfree (str);
- str = NULL;
- break;
- }
- str = new_str;
- strcpy (str + str_len, line);
- str_len += len;
- }
-
- fclose (fp);
-
- (void) SLang_push_malloced_string (str);
-}
-
-static int push_string_array_elements (SLang_Array_Type *at)
-{
- char **strs;
- unsigned int num;
- unsigned int i;
-
- if (at == NULL)
- return -1;
-
- strs = (char **)at->data;
- num = at->num_elements;
- for (i = 0; i < num; i++)
- {
- if (-1 == SLang_push_string (strs[i]))
- {
- SLdo_pop_n (i);
- return -1;
- }
- }
- SLang_push_integer ((int) num);
- return 0;
-}
-
-
-static void intrin_apropos (void)
-{
- int num_args;
- char *pat;
- char *namespace_name;
- unsigned int flags;
- SLang_Array_Type *at;
-
- num_args = SLang_Num_Function_Args;
-
- if (-1 == SLang_pop_uinteger (&flags))
- return;
- if (-1 == SLang_pop_slstring (&pat))
- return;
-
- namespace_name = NULL;
- at = NULL;
- if (num_args == 3)
- {
- if (-1 == SLang_pop_slstring (&namespace_name))
- goto free_and_return;
- }
-
- at = _SLang_apropos (namespace_name, pat, flags);
- if (num_args == 3)
- {
- (void) SLang_push_array (at, 0);
- goto free_and_return;
- }
-
- /* Maintain compatibility with old version of the function. That version
- * did not take three arguments and returned everything to the stack.
- * Yuk.
- */
- (void) push_string_array_elements (at);
-
- free_and_return:
- /* NULLs ok */
- SLang_free_slstring (namespace_name);
- SLang_free_slstring (pat);
- SLang_free_array (at);
-}
-
-static int intrin_get_defines (void)
-{
- int n = 0;
- char **s = _SLdefines;
-
- while (*s != NULL)
- {
- if (-1 == SLang_push_string (*s))
- {
- SLdo_pop_n ((unsigned int) n);
- return -1;
- }
- s++;
- n++;
- }
- return n;
-}
-
-static void intrin_get_reference (char *name)
-{
- _SLang_push_ref (1, (VOID_STAR) _SLlocate_name (name));
-}
-
-#ifdef HAVE_SYS_UTSNAME_H
-# include <sys/utsname.h>
-#endif
-
-static void uname_cmd (void)
-{
-#ifdef HAVE_UNAME
- struct utsname u;
- char *field_names [6];
- unsigned char field_types[6];
- VOID_STAR field_values [6];
- char *ptrs[6];
- int i;
-
- if (-1 == uname (&u))
- (void) SLang_push_null ();
-
- field_names[0] = "sysname"; ptrs[0] = u.sysname;
- field_names[1] = "nodename"; ptrs[1] = u.nodename;
- field_names[2] = "release"; ptrs[2] = u.release;
- field_names[3] = "version"; ptrs[3] = u.version;
- field_names[4] = "machine"; ptrs[4] = u.machine;
-
- for (i = 0; i < 5; i++)
- {
- field_types[i] = SLANG_STRING_TYPE;
- field_values[i] = (VOID_STAR) &ptrs[i];
- }
-
- if (0 == SLstruct_create_struct (5, field_names, field_types, field_values))
- return;
-#endif
-
- SLang_push_null ();
-}
-
-static void uninitialize_ref_intrin (SLang_Ref_Type *ref)
-{
- (void) _SLang_uninitialize_ref (ref);
-}
-
-static SLang_Intrin_Fun_Type SLang_Basic_Table [] = /*{{{*/
-{
- MAKE_INTRINSIC_1("__is_initialized", _SLang_is_ref_initialized, SLANG_INT_TYPE, SLANG_REF_TYPE),
- MAKE_INTRINSIC_S("__get_reference", intrin_get_reference, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_1("__uninitialize", uninitialize_ref_intrin, SLANG_VOID_TYPE, SLANG_REF_TYPE),
- MAKE_INTRINSIC_SS("get_doc_string_from_file", get_doc_string, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SS("autoload", SLang_autoload, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("is_defined", SLang_is_defined, SLANG_INT_TYPE),
- MAKE_INTRINSIC_0("string", _SLstring_intrinsic, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("uname", uname_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("getenv", intrin_getenv_cmd, SLANG_VOID_TYPE),
-#ifdef HAVE_PUTENV
- MAKE_INTRINSIC_0("putenv", intrin_putenv, SLANG_VOID_TYPE),
-#endif
- MAKE_INTRINSIC_S("evalfile", load_file, SLANG_INT_TYPE),
- MAKE_INTRINSIC_I("char", char_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("eval", SLang_load_string, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("dup", do_dup, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("integer", intrin_integer, SLANG_INT_TYPE),
- MAKE_INTRINSIC_S("system", SLsystem, SLANG_INT_TYPE),
- MAKE_INTRINSIC_0("_apropos", intrin_apropos, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("_trace_function", _SLang_trace_fun, SLANG_VOID_TYPE),
-#if SLANG_HAS_FLOAT
- MAKE_INTRINSIC_S("atof", _SLang_atof, SLANG_DOUBLE_TYPE),
- MAKE_INTRINSIC_0("double", intrin_double, SLANG_VOID_TYPE),
-#endif
- MAKE_INTRINSIC_0("int", intrin_int, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("typecast", intrin_typecast, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("_stkdepth", _SLstack_depth, SLANG_INT_TYPE),
- MAKE_INTRINSIC_I("_stk_reverse", intrin_reverse_stack, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("typeof", intrin_type_info, VOID_TYPE),
- MAKE_INTRINSIC_0("_typeof", intrin_type_info1, VOID_TYPE),
- MAKE_INTRINSIC_I("_pop_n", intrin_pop_n, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("_print_stack", lang_print_stack, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_I("_stk_roll", intrin_roll_stack, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SI("byte_compile_file", byte_compile_file, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("_clear_error", _SLang_clear_error, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("_function_name", intrin_function_name, SLANG_STRING_TYPE),
-#if SLANG_HAS_FLOAT
- MAKE_INTRINSIC_S("set_float_format", _SLset_double_format, SLANG_VOID_TYPE),
-#endif
- MAKE_INTRINSIC_S("_slang_guess_type", guess_type, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("error", intrin_error, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("message", intrin_message, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("__get_defined_symbols", intrin_get_defines, SLANG_INT_TYPE),
- MAKE_INTRINSIC_I("__pop_args", _SLstruct_pop_args, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_1("__push_args", _SLstruct_push_args, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
- MAKE_INTRINSIC_0("usage", usage, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("implements", _SLang_implements_intrinsic, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("use_namespace", _SLang_use_namespace_intrinsic, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("current_namespace", _SLang_cur_namespace_intrinsic, SLANG_STRING_TYPE),
- MAKE_INTRINSIC_0("length", length_cmd, SLANG_INT_TYPE),
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-/*}}}*/
-
-#ifdef SLANG_DOC_DIR
-char *SLang_Doc_Dir = SLANG_DOC_DIR;
-#else
-char *SLang_Doc_Dir = "";
-#endif
-
-static SLang_Intrin_Var_Type Intrin_Vars[] =
-{
- MAKE_VARIABLE("_debug_info", &_SLang_Compile_Line_Num_Info, SLANG_INT_TYPE, 0),
- MAKE_VARIABLE("_auto_declare", &_SLang_Auto_Declare_Globals, SLANG_INT_TYPE, 0),
- MAKE_VARIABLE("_traceback", &SLang_Traceback, SLANG_INT_TYPE, 0),
- MAKE_VARIABLE("_slangtrace", &_SLang_Trace, SLANG_INT_TYPE, 0),
- MAKE_VARIABLE("_slang_version", &SLang_Version, SLANG_INT_TYPE, 1),
- MAKE_VARIABLE("_slang_version_string", &SLang_Version_String, SLANG_STRING_TYPE, 1),
- MAKE_VARIABLE("_NARGS", &SLang_Num_Function_Args, SLANG_INT_TYPE, 1),
- MAKE_VARIABLE("_slang_doc_dir", &SLang_Doc_Dir, SLANG_STRING_TYPE, 1),
- MAKE_VARIABLE("NULL", NULL, SLANG_NULL_TYPE, 1),
- SLANG_END_INTRIN_VAR_TABLE
-};
-
-int SLang_init_slang (void) /*{{{*/
-{
- char name[3];
- unsigned int i;
- char **s;
- static char *sys_defines [] =
- {
-#if defined(__os2__)
- "OS2",
-#endif
-#if defined(__MSDOS__)
- "MSDOS",
-#endif
-#if defined(__WIN16__)
- "WIN16",
-#endif
-#if defined (__WIN32__)
- "WIN32",
-#endif
-#if defined(__NT__)
- "NT",
-#endif
-#if defined (VMS)
- "VMS",
-#endif
-#ifdef REAL_UNIX_SYSTEM
- "UNIX",
-#endif
-#if SLANG_HAS_FLOAT
- "SLANG_DOUBLE_TYPE",
-#endif
- NULL
- };
-
- if (-1 == _SLregister_types ()) return -1;
-
- if ((-1 == SLadd_intrin_fun_table(SLang_Basic_Table, NULL))
- || (-1 == SLadd_intrin_var_table (Intrin_Vars, NULL))
- || (-1 == _SLang_init_slstrops ())
- || (-1 == _SLang_init_sltime ())
- || (-1 == _SLstruct_init ())
-#if SLANG_HAS_COMPLEX
- || (-1 == _SLinit_slcomplex ())
-#endif
-#if SLANG_HAS_ASSOC_ARRAYS
- || (-1 == SLang_init_slassoc ())
-#endif
- )
- return -1;
-
- SLadd_global_variable (SLANG_SYSTEM_NAME);
-
- s = sys_defines;
- while (*s != NULL)
- {
- if (-1 == SLdefine_for_ifdef (*s)) return -1;
- s++;
- }
-
- /* give temp global variables $0 --> $9 */
- name[2] = 0; name[0] = '$';
- for (i = 0; i < 10; i++)
- {
- name[1] = (char) (i + '0');
- SLadd_global_variable (name);
- }
-
- SLang_init_case_tables ();
-
- /* Now add a couple of macros */
- SLang_load_string (".(_NARGS 1 - Sprintf error)verror");
- SLang_load_string (".(_NARGS 1 - Sprintf message)vmessage");
-
- if (SLang_Error)
- return -1;
-
- return 0;
-}
-
-/*}}}*/
-
-int SLang_set_argc_argv (int argc, char **argv)
-{
- static int this_argc;
- static char **this_argv;
- int i;
-
- if (argc < 0) argc = 0;
- this_argc = argc;
-
- if (NULL == (this_argv = (char **) SLmalloc ((argc + 1) * sizeof (char *))))
- return -1;
- memset ((char *) this_argv, 0, sizeof (char *) * (argc + 1));
-
- for (i = 0; i < argc; i++)
- {
- if (NULL == (this_argv[i] = SLang_create_slstring (argv[i])))
- goto return_error;
- }
-
- if (-1 == SLadd_intrinsic_variable ("__argc", (VOID_STAR)&this_argc,
- SLANG_INT_TYPE, 1))
- goto return_error;
-
- if (-1 == SLang_add_intrinsic_array ("__argv", SLANG_STRING_TYPE, 1,
- (VOID_STAR) this_argv, 1, argc))
- goto return_error;
-
- return 0;
-
- return_error:
- for (i = 0; i < argc; i++)
- SLang_free_slstring (this_argv[i]); /* NULL ok */
- SLfree ((char *) this_argv);
-
- return -1;
-}
diff --git a/mdk-stage1/slang/slstdio.c b/mdk-stage1/slang/slstdio.c
deleted file mode 100644
index 05db1af77..000000000
--- a/mdk-stage1/slang/slstdio.c
+++ /dev/null
@@ -1,1050 +0,0 @@
-/* file stdio intrinsics for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if defined(__unix__) || (defined (__os2__) && defined (__EMX__))
-# include <sys/types.h>
-#endif
-
-#ifdef HAVE_FCNTL_H
-# include <fcntl.h>
-#endif
-#ifdef HAVE_SYS_FCNTL_H
-# include <sys/fcntl.h>
-#endif
-
-#ifdef __unix__
-# include <sys/file.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <io.h>
-# include <dir.h>
-#endif
-
-#if defined(__DECC) && defined(VMS)
-# include <unixio.h>
-# include <unixlib.h>
-#endif
-
-#ifdef VMS
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#include <errno.h>
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct
-{
- FILE *fp; /* kind of obvious */
- char *file; /* file name associated with pointer */
-
- unsigned int flags; /* modes, etc... */
-#define SL_READ 0x0001
-#define SL_WRITE 0x0002
-#define SL_BINARY 0x0004
-#define SL_FDOPEN 0x2000
-#define SL_PIPE 0x4000
-#define SL_INUSE 0x8000
-}
-SL_File_Table_Type;
-
-static SL_File_Table_Type *SL_File_Table;
-
-static SL_File_Table_Type *get_free_file_table_entry (void)
-{
- SL_File_Table_Type *t = SL_File_Table, *tmax;
-
- tmax = t + SL_MAX_FILES;
- while (t < tmax)
- {
- if (t->flags == 0)
- {
- memset ((char *) t, 0, sizeof (SL_File_Table_Type));
- return t;
- }
- t++;
- }
-
- return NULL;
-}
-
-static unsigned int file_process_flags (char *mode)
-{
- char ch;
- unsigned int flags = 0;
-
- while (1)
- {
- ch = *mode++;
- switch (ch)
- {
- case 'r': flags |= SL_READ;
- break;
- case 'w':
- case 'a':
- case 'A':
- flags |= SL_WRITE;
- break;
- case '+': flags |= SL_WRITE | SL_READ;
- break;
- case 'b': flags |= SL_BINARY;
- break;
- case 0:
- return flags;
-
- default:
- SLang_verror (SL_INVALID_PARM, "File flag %c is not supported", ch);
- return 0;
- }
- }
-}
-
-static int open_file_type (char *file, int fd, char *mode,
- FILE *(*open_fun)(char *, char *),
- int (*close_fun)(FILE *),
- unsigned int xflags)
-{
- FILE *fp;
- SL_File_Table_Type *t;
- unsigned int flags;
- SLang_MMT_Type *mmt;
-
- fp = NULL;
- t = NULL;
- mmt = NULL;
-
- if ((NULL == (t = get_free_file_table_entry ()))
- || (0 == (flags = file_process_flags(mode))))
- goto return_error;
-
- if (fd != -1)
- fp = fdopen (fd, mode);
- else
- fp = open_fun (file, mode);
-
- if (fp == NULL)
- {
- _SLerrno_errno = errno;
- goto return_error;
- }
-
- if (NULL == (mmt = SLang_create_mmt (SLANG_FILE_PTR_TYPE, (VOID_STAR) t)))
- goto return_error;
-
- t->fp = fp;
- t->flags = flags | xflags;
- fp = NULL; /* allow free_mmt to close fp */
-
- if ((NULL != (t->file = SLang_create_slstring (file)))
- && (0 == SLang_push_mmt (mmt)))
- return 0;
-
- /* drop */
-
- return_error:
- if (fp != NULL) (*close_fun) (fp);
- if (mmt != NULL) SLang_free_mmt (mmt);
- (void) SLang_push_null ();
- return -1;
-}
-
-/* Since some compilers do not have popen/pclose prototyped and in scope,
- * and pc compilers sometimes have silly prototypes involving PASCAL, etc.
- * use wrappers around the function to avoid compilation errors.
- */
-
-static FILE *fopen_fun (char *f, char *m)
-{
- return fopen (f, m);
-}
-static int fclose_fun (FILE *fp)
-{
- return fclose (fp);
-}
-
-static void stdio_fopen (char *file, char *mode)
-{
- (void) open_file_type (file, -1, mode, fopen_fun, fclose_fun, 0);
-}
-
-int _SLstdio_fdopen (char *file, int fd, char *mode)
-{
- if (fd == -1)
- {
- _SLerrno_errno = EBADF;
- (void) SLang_push_null ();
- return -1;
- }
-
- return open_file_type (file, fd, mode, NULL, fclose_fun, SL_FDOPEN);
-}
-
-#ifdef HAVE_POPEN
-static int pclose_fun (FILE *fp)
-{
- return pclose (fp);
-}
-
-static FILE *popen_fun (char *file, char *mode)
-{
- return popen (file, mode);
-}
-
-static void stdio_popen (char *file, char *mode)
-{
- (void) open_file_type (file, -1, mode, popen_fun, pclose_fun, SL_PIPE);
-}
-#endif
-
-/* returns pointer to file entry if it is open and consistent with
- flags. Returns NULL otherwise */
-static SLang_MMT_Type *pop_fp (unsigned int flags, FILE **fp_ptr)
-{
- SL_File_Table_Type *t;
- SLang_MMT_Type *mmt;
-
- *fp_ptr = NULL;
-
- if (NULL == (mmt = SLang_pop_mmt (SLANG_FILE_PTR_TYPE)))
- return NULL;
-
- t = (SL_File_Table_Type *) SLang_object_from_mmt (mmt);
- if ((t->flags & flags)
- && (NULL != (*fp_ptr = t->fp)))
- return mmt;
-
- SLang_free_mmt (mmt);
- return NULL;
-}
-
-static FILE *check_fp (SL_File_Table_Type *t, unsigned flags)
-{
- if ((t != NULL) && (t->flags & flags))
- return t->fp;
-
- return NULL;
-}
-
-char *SLang_get_name_from_fileptr (SLang_MMT_Type *mmt)
-{
- SL_File_Table_Type *ft;
-
- ft = (SL_File_Table_Type *) SLang_object_from_mmt (mmt);
- if (ft == NULL)
- return NULL;
- return ft->file;
-}
-
-int SLang_pop_fileptr (SLang_MMT_Type **mmt, FILE **fp)
-{
- if (NULL == (*mmt = pop_fp (0xFFFF, fp)))
- {
-#ifdef EBADF
- _SLerrno_errno = EBADF;
-#endif
- return -1;
- }
-
- return 0;
-}
-
-static int close_file_type (SL_File_Table_Type *t)
-{
- int ret = 0;
- FILE *fp;
-
- if (t == NULL)
- return -1;
-
- fp = t->fp;
-
- if (NULL == fp) ret = -1;
- else
- {
- if (0 == (t->flags & SL_PIPE))
- {
- if (EOF == (ret = fclose (fp)))
- _SLerrno_errno = errno;
- }
-#ifdef HAVE_POPEN
- else
- {
- if (-1 == (ret = pclose (fp)))
- _SLerrno_errno = errno;
- }
-#endif
- }
-
- if (t->file != NULL) SLang_free_slstring (t->file);
- memset ((char *) t, 0, sizeof (SL_File_Table_Type));
- return ret;
-}
-
-static int stdio_fclose (SL_File_Table_Type *t)
-{
- int ret;
-
- if (NULL == check_fp (t, 0xFFFF))
- return -1;
-
- ret = close_file_type (t);
-
- t->flags = SL_INUSE;
- return ret;
-}
-
-static int read_one_line (FILE *fp, char **strp, unsigned int *lenp)
-{
- char buf[512];
- char *str;
- unsigned int len;
-
- *strp = NULL;
- len = 0;
- str = NULL;
-
- while (NULL != fgets (buf, sizeof (buf), fp))
- {
- unsigned int dlen;
- char *new_str;
- int done_flag;
-
- dlen = strlen (buf);
- /* Note: If the file contains embedded \0 characters, then this
- * fails to work properly since dlen will not be correct.
- */
- done_flag = ((dlen + 1 < sizeof (buf))
- || (buf[dlen - 1] == '\n'));
-
- if (done_flag && (str == NULL))
- {
- /* Avoid the malloc */
- str = buf;
- len = dlen;
- break;
- }
-
- if (NULL == (new_str = SLrealloc (str, len + dlen + 1)))
- {
- SLfree (str);
- return -1;
- }
-
- str = new_str;
- strcpy (str + len, buf);
- len += dlen;
-
- if (done_flag) break;
- }
-
- if (str == NULL)
- return 0;
-
- *strp = SLang_create_nslstring (str, len);
- if (str != buf) SLfree (str);
-
- if (*strp == NULL) return -1;
-
- *lenp = len;
- return 1;
-}
-
-/* returns number of characters read and pushes the string to the stack.
- If it fails, it returns -1 */
-static int stdio_fgets (SLang_Ref_Type *ref, SL_File_Table_Type *t)
-{
- char *s;
- unsigned int len;
- FILE *fp;
- int status;
-
- if (NULL == (fp = check_fp (t, SL_READ)))
- return -1;
-
- status = read_one_line (fp, &s, &len);
- if (status <= 0)
- return -1;
-
- status = SLang_assign_to_ref (ref, SLANG_STRING_TYPE, (VOID_STAR)&s);
- SLang_free_slstring (s);
-
- if (status == -1)
- return -1;
-
- return (int) len;
-}
-
-static void stdio_fgetslines_internal (FILE *fp, unsigned int n)
-{
- unsigned int num_lines, max_num_lines;
- char **list;
- SLang_Array_Type *at;
- int inum_lines;
-
- if (n > 1024)
- max_num_lines = 1024;
- else
- {
- max_num_lines = n;
- if (max_num_lines == 0)
- max_num_lines++;
- }
-
- list = (char **) SLmalloc (sizeof (char *) * max_num_lines);
- if (list == NULL)
- return;
-
- num_lines = 0;
- while (num_lines < n)
- {
- int status;
- char *line;
- unsigned int len;
-
- status = read_one_line (fp, &line, &len);
- if (status == -1)
- goto return_error;
-
- if (status == 0)
- break;
-
- if (max_num_lines == num_lines)
- {
- char **new_list;
-
- if (max_num_lines + 4096 > n)
- max_num_lines = n;
- else
- max_num_lines += 4096;
-
- new_list = (char **) SLrealloc ((char *)list, sizeof (char *) * max_num_lines);
- if (new_list == NULL)
- {
- SLang_free_slstring (line);
- goto return_error;
- }
- list = new_list;
- }
-
- list[num_lines] = line;
- num_lines++;
- }
-
- if (num_lines != max_num_lines)
- {
- char **new_list;
-
- new_list = (char **)SLrealloc ((char *)list, sizeof (char *) * (num_lines + 1));
- if (new_list == NULL)
- goto return_error;
-
- list = new_list;
- }
-
- inum_lines = (int) num_lines;
- if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, (VOID_STAR) list, &inum_lines, 1)))
- goto return_error;
-
- if (-1 == SLang_push_array (at, 1))
- SLang_push_null ();
- return;
-
- return_error:
- while (num_lines > 0)
- {
- num_lines--;
- SLfree (list[num_lines]);
- }
- SLfree ((char *)list);
- SLang_push_null ();
-}
-
-static void stdio_fgetslines (void)
-{
- unsigned int n;
- FILE *fp;
- SLang_MMT_Type *mmt;
-
- n = (unsigned int)-1;
-
- if (SLang_Num_Function_Args == 2)
- {
- if (-1 == SLang_pop_uinteger (&n))
- return;
- }
-
- if (NULL == (mmt = pop_fp (SL_READ, &fp)))
- {
- SLang_push_null ();
- return;
- }
-
- stdio_fgetslines_internal (fp, n);
- SLang_free_mmt (mmt);
-}
-
-
-static int stdio_fputs (char *s, SL_File_Table_Type *t)
-{
- FILE *fp;
-
- if (NULL == (fp = check_fp (t, SL_WRITE)))
- return -1;
-
- if (EOF == fputs(s, fp)) return -1;
- return (int) strlen (s);
-}
-
-static int stdio_fflush (SL_File_Table_Type *t)
-{
- FILE *fp;
-
- if (NULL == (fp = check_fp (t, SL_WRITE)))
- return -1;
-
- if (EOF == fflush (fp))
- {
- _SLerrno_errno = errno;
- return -1;
- }
-
- return 0;
-}
-
-/* Usage: n = fread (&str, data-type, nelems, fp); */
-static void stdio_fread (SLang_Ref_Type *ref, int *data_typep, unsigned int *num_elemns, SL_File_Table_Type *t)
-{
- char *s;
- FILE *fp;
- int ret;
- unsigned int num_read, num_to_read;
- unsigned int nbytes;
- SLang_Class_Type *cl;
- unsigned int sizeof_type;
- int data_type;
-
- ret = -1;
- s = NULL;
- cl = NULL;
-
- if (NULL == (fp = check_fp (t, SL_READ)))
- goto the_return;
-
- /* FIXME: priority = low : I should add some mechanism to support
- * other types.
- */
- data_type = *data_typep;
-
- cl = _SLclass_get_class ((unsigned char) data_type);
-
- if (cl->cl_fread == NULL)
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "fread does not support %s objects",
- cl->cl_name);
- goto the_return;
- }
-
- sizeof_type = cl->cl_sizeof_type;
-
- num_to_read = *num_elemns;
- nbytes = (unsigned int) num_to_read * sizeof_type;
-
- s = SLmalloc (nbytes + 1);
- if (s == NULL)
- goto the_return;
-
- ret = cl->cl_fread (data_type, fp, (VOID_STAR)s, num_to_read, &num_read);
-
- if ((num_read == 0)
- && (num_read != num_to_read))
- ret = -1;
-
- if ((ret == -1) && ferror (fp))
- _SLerrno_errno = errno;
-
- if ((ret == 0)
- && (num_read != num_to_read))
- {
- char *new_s;
-
- nbytes = num_read * sizeof_type;
- new_s = SLrealloc (s, nbytes + 1);
- if (new_s == NULL)
- ret = -1;
- else
- s = new_s;
- }
-
- if (ret == 0)
- {
- if (num_read == 1)
- {
- ret = SLang_assign_to_ref (ref, data_type, (VOID_STAR)s);
- SLfree (s);
- }
- else if ((data_type == SLANG_CHAR_TYPE)
- || (data_type == SLANG_UCHAR_TYPE))
- {
- SLang_BString_Type *bs;
-
- bs = SLbstring_create_malloced ((unsigned char *)s, num_read, 1);
- ret = SLang_assign_to_ref (ref, SLANG_BSTRING_TYPE, (VOID_STAR)&bs);
- SLbstring_free (bs);
- }
- else
- {
- SLang_Array_Type *at;
- int inum_read = (int) num_read;
- at = SLang_create_array (data_type, 0, (VOID_STAR)s, &inum_read, 1);
- ret = SLang_assign_to_ref (ref, SLANG_ARRAY_TYPE, (VOID_STAR)&at);
- SLang_free_array (at);
- }
- s = NULL;
- }
-
- the_return:
-
- if (s != NULL)
- SLfree (s);
-
- if (ret == -1)
- SLang_push_integer (ret);
- else
- SLang_push_uinteger (num_read);
-}
-
-/* Usage: n = fwrite (str, fp); */
-static void stdio_fwrite (SL_File_Table_Type *t)
-{
- FILE *fp;
- unsigned char *s;
- unsigned int num_to_write, num_write;
- int ret;
- SLang_BString_Type *b;
- SLang_Array_Type *at;
- SLang_Class_Type *cl;
-
- ret = -1;
- b = NULL;
- at = NULL;
-
- switch (SLang_peek_at_stack ())
- {
- case SLANG_BSTRING_TYPE:
- case SLANG_STRING_TYPE:
- if (-1 == SLang_pop_bstring (&b))
- goto the_return;
-
- if (NULL == (s = SLbstring_get_pointer (b, &num_to_write)))
- goto the_return;
-
- cl = _SLclass_get_class (SLANG_UCHAR_TYPE);
- break;
-
- default:
- if (-1 == SLang_pop_array (&at, 1))
- goto the_return;
-
- cl = at->cl;
- num_to_write = at->num_elements;
- s = (unsigned char *) at->data;
- }
-
- if (NULL == (fp = check_fp (t, SL_WRITE)))
- goto the_return;
-
- if (cl->cl_fwrite == NULL)
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "fwrite does not support %s objects", cl->cl_name);
- goto the_return;
- }
-
- ret = cl->cl_fwrite (cl->cl_data_type, fp, s, num_to_write, &num_write);
-
- if ((ret == -1) && ferror (fp))
- _SLerrno_errno = errno;
-
- /* drop */
- the_return:
- if (b != NULL)
- SLbstring_free (b);
- if (at != NULL)
- SLang_free_array (at);
-
- if (ret == -1)
- SLang_push_integer (ret);
- else
- SLang_push_uinteger (num_write);
-}
-
-static int stdio_fseek (SL_File_Table_Type *t, int *ofs, int *whence)
-{
- FILE *fp;
-
- if (NULL == (fp = check_fp (t, 0xFFFF)))
- return -1;
-
- if (-1 == fseek (fp, (long) *ofs, *whence))
- {
- _SLerrno_errno = errno;
- return -1;
- }
-
- return 0;
-}
-
-static int stdio_ftell (SL_File_Table_Type *t)
-{
- FILE *fp;
- long ofs;
-
- if (NULL == (fp = check_fp (t, 0xFFFF)))
- return -1;
-
- if (-1L == (ofs = ftell (fp)))
- {
- _SLerrno_errno = errno;
- return -1;
- }
-
- return (int) ofs;
-}
-
-static int stdio_feof (SL_File_Table_Type *t)
-{
- FILE *fp;
-
- if (NULL == (fp = check_fp (t, 0xFFFF)))
- return -1;
-
- return feof (fp);
-}
-
-static int stdio_ferror (SL_File_Table_Type *t)
-{
- FILE *fp;
-
- if (NULL == (fp = check_fp (t, 0xFFFF)))
- return -1;
-
- return ferror (fp);
-}
-
-static void stdio_clearerr (SL_File_Table_Type *t)
-{
- FILE *fp;
-
- if (NULL != (fp = check_fp (t, 0xFFFF)))
- clearerr (fp);
-}
-
-/* () = fprintf (fp, "FORMAT", arg...); */
-static int stdio_fprintf (void)
-{
- char *s;
- FILE *fp;
- SLang_MMT_Type *mmt;
- int status;
-
- if (-1 == _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 2))
- return -1;
-
- if (-1 == SLang_pop_slstring (&s))
- return -1;
-
- if (NULL == (mmt = pop_fp (SL_WRITE, &fp)))
- {
- SLang_free_slstring (s);
- return -1;
- }
-
- if (EOF == fputs(s, fp))
- status = -1;
- else
- status = (int) strlen (s);
-
- SLang_free_mmt (mmt);
- SLang_free_slstring (s);
- return status;
-}
-
-static int stdio_printf (void)
-{
- char *s;
- int status;
-
- if (-1 == _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 1))
- return -1;
-
- if (-1 == SLang_pop_slstring (&s))
- return -1;
-
- if (EOF == fputs(s, stdout))
- status = -1;
- else
- status = (int) strlen (s);
-
- SLang_free_slstring (s);
- return status;
-}
-
-
-#define F SLANG_FILE_PTR_TYPE
-#define R SLANG_REF_TYPE
-#define I SLANG_INT_TYPE
-#define V SLANG_VOID_TYPE
-#define S SLANG_STRING_TYPE
-#define B SLANG_BSTRING_TYPE
-#define U SLANG_UINT_TYPE
-#define D SLANG_DATATYPE_TYPE
-static SLang_Intrin_Fun_Type Stdio_Name_Table[] =
-{
- MAKE_INTRINSIC_0("fgetslines", stdio_fgetslines, V),
- MAKE_INTRINSIC_SS("fopen", stdio_fopen, V),
- MAKE_INTRINSIC_1("feof", stdio_feof, I, F),
- MAKE_INTRINSIC_1("ferror", stdio_ferror, I, F),
- MAKE_INTRINSIC_1("fclose", stdio_fclose, I, F),
- MAKE_INTRINSIC_2("fgets", stdio_fgets, I, R, F),
- MAKE_INTRINSIC_1("fflush", stdio_fflush, I, F),
- MAKE_INTRINSIC_2("fputs", stdio_fputs, I, S, F),
- MAKE_INTRINSIC_0("fprintf", stdio_fprintf, I),
- MAKE_INTRINSIC_0("printf", stdio_printf, I),
- MAKE_INTRINSIC_3("fseek", stdio_fseek, I, F, I, I),
- MAKE_INTRINSIC_1("ftell", stdio_ftell, I, F),
- MAKE_INTRINSIC_1("clearerr", stdio_clearerr, V, F),
- MAKE_INTRINSIC_4("fread", stdio_fread, V, R, D, U, F),
- MAKE_INTRINSIC_1("fwrite", stdio_fwrite, V, F),
-#ifdef HAVE_POPEN
- MAKE_INTRINSIC_SS("popen", stdio_popen, V),
- MAKE_INTRINSIC_1("pclose", stdio_fclose, I, F),
-#endif
- SLANG_END_INTRIN_FUN_TABLE
-};
-#undef F
-#undef I
-#undef R
-#undef V
-#undef S
-#undef B
-#undef U
-#undef D
-
-#ifndef SEEK_SET
-# define SEEK_SET 0
-#endif
-#ifndef SEEK_CUR
-# define SEEK_CUR 1
-#endif
-#ifndef SEEK_END
-# define SEEK_END 2
-#endif
-
-static SLang_IConstant_Type Stdio_Consts [] =
-{
- MAKE_ICONSTANT("SEEK_SET", SEEK_SET),
- MAKE_ICONSTANT("SEEK_END", SEEK_END),
- MAKE_ICONSTANT("SEEK_CUR", SEEK_CUR),
- SLANG_END_ICONST_TABLE
-};
-
-static void destroy_file_type (unsigned char type, VOID_STAR ptr)
-{
- (void) type;
- (void) close_file_type ((SL_File_Table_Type *) ptr);
-}
-
-
-struct _SLang_Foreach_Context_Type
-{
- SLang_MMT_Type *mmt;
- FILE *fp;
-#define CTX_USE_LINE 1
-#define CTX_USE_CHAR 2
- unsigned char type;
-};
-
-
-static SLang_Foreach_Context_Type *
-cl_foreach_open (unsigned char type, unsigned int num)
-{
- SLang_Foreach_Context_Type *c;
- SLang_MMT_Type *mmt;
- FILE *fp;
-
- if (NULL == (mmt = pop_fp (SL_READ, &fp)))
- return NULL;
-
- type = CTX_USE_LINE;
-
- switch (num)
- {
- char *s;
-
- case 0:
- type = CTX_USE_LINE;
- break;
-
- case 1:
- if (-1 == SLang_pop_slstring (&s))
- {
- SLang_free_mmt (mmt);
- return NULL;
- }
- if (0 == strcmp (s, "char"))
- type = CTX_USE_CHAR;
- else if (0 == strcmp (s, "line"))
- type = CTX_USE_LINE;
- else
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "using '%s' not supported by File_Type",
- s);
- SLang_free_slstring (s);
- SLang_free_mmt (mmt);
- return NULL;
- }
- SLang_free_slstring (s);
- break;
-
- default:
- SLdo_pop_n (num);
- SLang_verror (SL_NOT_IMPLEMENTED,
- "Usage: foreach (File_Type) using ([line|char])");
- SLang_free_mmt (mmt);
- return NULL;
- }
-
- if (NULL == (c = (SLang_Foreach_Context_Type *) SLmalloc (sizeof (SLang_Foreach_Context_Type))))
- {
- SLang_free_mmt (mmt);
- return NULL;
- }
- memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
- c->type = type;
- c->mmt = mmt;
- c->fp = fp;
-
- return c;
-}
-
-static void cl_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- (void) type;
- if (c == NULL) return;
- SLang_free_mmt (c->mmt);
- SLfree ((char *) c);
-}
-
-static int cl_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- int status;
- int ch;
- unsigned int len;
- char *s;
-
- (void) type;
-
- if (c == NULL)
- return -1;
-
- switch (c->type)
- {
- case CTX_USE_CHAR:
- if (EOF == (ch = getc (c->fp)))
- return 0;
- if (-1 == SLang_push_uchar ((unsigned char) ch))
- return -1;
- return 1;
-
- case CTX_USE_LINE:
- status = read_one_line (c->fp, &s, &len);
- if (status <= 0)
- return status;
- if (0 == _SLang_push_slstring (s))
- return 1;
- return -1;
- }
-
- return -1;
-}
-
-static int Stdio_Initialized;
-static SLang_MMT_Type *Stdio_Mmts[3];
-
-int SLang_init_stdio (void)
-{
- unsigned int i;
- SL_File_Table_Type *s;
- SLang_Class_Type *cl;
- char *names[3];
-
- if (Stdio_Initialized)
- return 0;
-
- SL_File_Table = (SL_File_Table_Type *)SLcalloc(sizeof (SL_File_Table_Type), SL_MAX_FILES);
- if (SL_File_Table == NULL)
- return -1;
-
- if (NULL == (cl = SLclass_allocate_class ("File_Type")))
- return -1;
- cl->cl_destroy = destroy_file_type;
- cl->cl_foreach_open = cl_foreach_open;
- cl->cl_foreach_close = cl_foreach_close;
- cl->cl_foreach = cl_foreach;
-
-
- if (-1 == SLclass_register_class (cl, SLANG_FILE_PTR_TYPE, sizeof (SL_File_Table_Type), SLANG_CLASS_TYPE_MMT))
- return -1;
-
- if ((-1 == SLadd_intrin_fun_table(Stdio_Name_Table, "__STDIO__"))
- || (-1 == SLadd_iconstant_table (Stdio_Consts, NULL))
- || (-1 == _SLerrno_init ()))
- return -1;
-
- names[0] = "stdin";
- names[1] = "stdout";
- names[2] = "stderr";
-
- s = SL_File_Table;
- s->fp = stdin; s->flags = SL_READ;
-
- s++;
- s->fp = stdout; s->flags = SL_WRITE;
-
- s++;
- s->fp = stderr; s->flags = SL_WRITE|SL_READ;
-
- s = SL_File_Table;
- for (i = 0; i < 3; i++)
- {
- if (NULL == (s->file = SLang_create_slstring (names[i])))
- return -1;
-
- if (NULL == (Stdio_Mmts[i] = SLang_create_mmt (SLANG_FILE_PTR_TYPE, (VOID_STAR) s)))
- return -1;
- SLang_inc_mmt (Stdio_Mmts[i]);
-
- if (-1 == SLadd_intrinsic_variable (s->file, (VOID_STAR)&Stdio_Mmts[i], SLANG_FILE_PTR_TYPE, 1))
- return -1;
- s++;
- }
-
- Stdio_Initialized = 1;
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slstring.c b/mdk-stage1/slang/slstring.c
deleted file mode 100644
index 529c41827..000000000
--- a/mdk-stage1/slang/slstring.c
+++ /dev/null
@@ -1,546 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct _SLstring_Type
-{
- struct _SLstring_Type *next;
- unsigned int ref_count;
- char bytes [1];
-}
-SLstring_Type;
-
-static SLstring_Type *String_Hash_Table [SLSTRING_HASH_TABLE_SIZE];
-static char Single_Char_Strings [256 * 2];
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-#define MAX_FREE_STORE_LEN 32
-static SLstring_Type *SLS_Free_Store [MAX_FREE_STORE_LEN];
-
-# define NUM_CACHED_STRINGS 601
-typedef struct
-{
- unsigned long hash;
- SLstring_Type *sls;
- unsigned int len;
-}
-Cached_String_Type;
-static Cached_String_Type Cached_Strings [NUM_CACHED_STRINGS];
-
-#define GET_CACHED_STRING(s) \
- (Cached_Strings + (unsigned int)(((unsigned long) (s)) % NUM_CACHED_STRINGS))
-
-_INLINE_
-static void cache_string (SLstring_Type *sls, unsigned int len, unsigned long hash)
-{
- Cached_String_Type *cs;
-
- cs = GET_CACHED_STRING(sls->bytes);
- cs->sls = sls;
- cs->hash = hash;
- cs->len = len;
-}
-
-_INLINE_
-static void uncache_string (char *s)
-{
- Cached_String_Type *cs;
-
- cs = GET_CACHED_STRING(s);
- if ((cs->sls != NULL)
- && (cs->sls->bytes == s))
- cs->sls = NULL;
-}
-#endif
-
-
-
-_INLINE_
-unsigned long _SLstring_hash (unsigned char *s, unsigned char *smax)
-{
- register unsigned long h = 0;
- register unsigned long sum = 0;
- unsigned char *smax4;
-
- smax4 = smax - 4;
-
- while (s < smax4)
- {
- sum += s[0];
- h = sum + (h << 1);
- sum += s[1];
- h = sum + (h << 1);
- sum += s[2];
- h = sum + (h << 1);
- sum += s[3];
- h = sum + (h << 1);
-
- s += 4;
- }
-
- while (s < smax)
- {
- sum += *s++;
- h ^= sum + (h << 3); /* slightly different */
- }
-
- return h;
-}
-
-unsigned long _SLcompute_string_hash (char *s)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
- Cached_String_Type *cs;
- SLstring_Type *sls;
-
- cs = GET_CACHED_STRING(s);
- if (((sls = cs->sls) != NULL)
- && (sls->bytes == s))
- return cs->hash;
-#endif
- return _SLstring_hash ((unsigned char *) s, (unsigned char *) s + strlen (s));
-}
-
-_INLINE_
-/* This routine works with any (long) string */
-static SLstring_Type *find_string (char *s, unsigned int len, unsigned long hash)
-{
- SLstring_Type *sls;
- char ch;
-
- sls = String_Hash_Table [(unsigned int)(hash % SLSTRING_HASH_TABLE_SIZE)];
-
- if (sls == NULL)
- return NULL;
-
- ch = s[0];
- do
- {
- char *bytes = sls->bytes;
-
- /* Note that we need to actually make sure that bytes[len] == 0.
- * In this case, it is not enough to just compare pointers. In fact,
- * this is called from create_nstring, etc... It is unlikely that the
- * pointer is a slstring
- */
- if ((/* (s == bytes) || */ ((ch == bytes[0])
- && (0 == strncmp (s, bytes, len))))
- && (bytes [len] == 0))
- break;
-
- sls = sls->next;
- }
- while (sls != NULL);
-
- return sls;
-}
-
-_INLINE_
-static SLstring_Type *find_slstring (char *s, unsigned long hash)
-{
- SLstring_Type *sls;
-
- sls = String_Hash_Table [(unsigned int)(hash % SLSTRING_HASH_TABLE_SIZE)];
- while (sls != NULL)
- {
- if (s == sls->bytes)
- return sls;
-
- sls = sls->next;
- }
- return sls;
-}
-
-_INLINE_
-static SLstring_Type *allocate_sls (unsigned int len)
-{
- SLstring_Type *sls;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if ((len < MAX_FREE_STORE_LEN)
- && (NULL != (sls = SLS_Free_Store [len])))
- {
- SLS_Free_Store[len] = NULL;
- return sls;
- }
-#endif
- /* FIXME: use structure padding */
- return (SLstring_Type *) SLmalloc (len + sizeof (SLstring_Type));
-}
-
-_INLINE_
-static void free_sls (SLstring_Type *sls, unsigned int len)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
- if ((len < MAX_FREE_STORE_LEN)
- && (SLS_Free_Store[len] == NULL))
- {
- SLS_Free_Store [len] = sls;
- return;
- }
-#else
- (void) len;
-#endif
- SLfree ((char *)sls);
-}
-
-_INLINE_
-static char *create_long_string (char *s, unsigned int len, unsigned long hash)
-{
- SLstring_Type *sls;
-
- sls = find_string (s, len, hash);
-
- if (sls != NULL)
- {
- sls->ref_count++;
- s = sls->bytes;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- cache_string (sls, len, hash);
-#endif
- return s;
- }
-
- sls = allocate_sls (len);
- if (sls == NULL)
- return NULL;
-
- strncpy (sls->bytes, s, len);
- sls->bytes[len] = 0;
- sls->ref_count = 1;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- cache_string (sls, len, hash);
-#endif
-
- hash = hash % SLSTRING_HASH_TABLE_SIZE;
- sls->next = String_Hash_Table [(unsigned int)hash];
- String_Hash_Table [(unsigned int)hash] = sls;
-
- return sls->bytes;
-}
-
-_INLINE_
-static char *create_short_string (char *s, unsigned int len)
-{
- char ch;
-
- /* Note: if len is 0, then it does not matter what *s is. This is
- * important for SLang_create_nslstring.
- */
- if (len) ch = *s; else ch = 0;
-
- len = 2 * (unsigned int) ((unsigned char) ch);
- Single_Char_Strings [len] = ch;
- Single_Char_Strings [len + 1] = 0;
- return Single_Char_Strings + len;
-}
-
-/* s cannot be NULL */
-_INLINE_
-static char *create_nstring (char *s, unsigned int len, unsigned long *hash_ptr)
-{
- unsigned long hash;
-
- if (len < 2)
- return create_short_string (s, len);
-
- hash = _SLstring_hash ((unsigned char *) s, (unsigned char *) (s + len));
- *hash_ptr = hash;
-
- return create_long_string (s, len, hash);
-}
-
-char *SLang_create_nslstring (char *s, unsigned int len)
-{
- unsigned long hash;
- return create_nstring (s, len, &hash);
-}
-
-char *_SLstring_make_hashed_string (char *s, unsigned int len, unsigned long *hashptr)
-{
- unsigned long hash;
-
- if (s == NULL) return NULL;
-
- hash = _SLstring_hash ((unsigned char *) s, (unsigned char *) s + len);
- *hashptr = hash;
-
- if (len < 2)
- return create_short_string (s, len);
-
- return create_long_string (s, len, hash);
-}
-
-char *_SLstring_dup_hashed_string (char *s, unsigned long hash)
-{
- unsigned int len;
-#if _SLANG_OPTIMIZE_FOR_SPEED
- Cached_String_Type *cs;
- SLstring_Type *sls;
-
- if (s == NULL) return NULL;
- if (s[0] == 0)
- return create_short_string (s, 0);
- if (s[1] == 0)
- return create_short_string (s, 1);
-
- cs = GET_CACHED_STRING(s);
- if (((sls = cs->sls) != NULL)
- && (sls->bytes == s))
- {
- sls->ref_count += 1;
- return s;
- }
-#else
- if (s == NULL) return NULL;
-#endif
-
- len = strlen (s);
-#if !_SLANG_OPTIMIZE_FOR_SPEED
- if (len < 2) return create_short_string (s, len);
-#endif
-
- return create_long_string (s, len, hash);
-}
-
-char *_SLstring_dup_slstring (char *s)
-{
- SLstring_Type *sls;
- unsigned int len;
- unsigned long hash;
-#if _SLANG_OPTIMIZE_FOR_SPEED
- Cached_String_Type *cs;
-
- cs = GET_CACHED_STRING(s);
- if (((sls = cs->sls) != NULL)
- && (sls->bytes == s))
- {
- sls->ref_count += 1;
- return s;
- }
-#endif
-
- if ((s == NULL) || ((len = strlen (s)) < 2))
- return s;
-
- hash = _SLstring_hash ((unsigned char *)s, (unsigned char *)(s + len));
-
- sls = find_slstring (s, hash);
- if (sls == NULL)
- {
- SLang_Error = SL_INTERNAL_ERROR;
- return NULL;
- }
-
- sls->ref_count++;
-#if _SLANG_OPTIMIZE_FOR_SPEED
- cache_string (sls, len, hash);
-#endif
- return s;
-}
-
-static void free_sls_string (SLstring_Type *sls, char *s, unsigned int len,
- unsigned long hash)
-{
- SLstring_Type *sls1, *prev;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- uncache_string (s);
-#endif
-
- hash = hash % SLSTRING_HASH_TABLE_SIZE;
-
- sls1 = String_Hash_Table [(unsigned int) hash];
-
- prev = NULL;
-
- /* This should not fail. */
- while (sls1 != sls)
- {
- prev = sls1;
- sls1 = sls1->next;
- }
-
- if (prev != NULL)
- prev->next = sls->next;
- else
- String_Hash_Table [(unsigned int) hash] = sls->next;
-
- free_sls (sls, len);
-}
-
-_INLINE_
-static void free_long_string (char *s, unsigned int len, unsigned long hash)
-{
- SLstring_Type *sls;
-
- if (NULL == (sls = find_slstring (s, hash)))
- {
- SLang_doerror ("Application internal error: invalid attempt to free string");
- return;
- }
-
- sls->ref_count--;
- if (sls->ref_count != 0)
- {
-#if _SLANG_OPTIMIZE_FOR_SPEED
- /* cache_string (sls, len, hash); */
-#endif
- return;
- }
-
-
- free_sls_string (sls, s, len, hash);
-}
-
-/* This routine may be passed NULL-- it is not an error. */
-void SLang_free_slstring (char *s)
-{
- unsigned long hash;
- unsigned int len;
-#if _SLANG_OPTIMIZE_FOR_SPEED
- Cached_String_Type *cs;
- SLstring_Type *sls;
-
- cs = GET_CACHED_STRING(s);
- if (((sls = cs->sls) != NULL)
- && (sls->bytes == s))
- {
- if (sls->ref_count <= 1)
- free_sls_string (sls, s, cs->len, cs->hash);
- else
- sls->ref_count -= 1;
- return;
- }
-#endif
-
- if (s == NULL) return;
-
- if ((len = strlen (s)) < 2)
- return;
-
- hash = _SLstring_hash ((unsigned char *)s, (unsigned char *) s + len);
- free_long_string (s, len, hash);
-}
-
-char *SLang_create_slstring (char *s)
-{
- unsigned long hash;
-#if _SLANG_OPTIMIZE_FOR_SPEED
- Cached_String_Type *cs;
- SLstring_Type *sls;
-
- cs = GET_CACHED_STRING(s);
- if (((sls = cs->sls) != NULL)
- && (sls->bytes == s))
- {
- sls->ref_count += 1;
- return s;
- }
-#endif
-
- if (s == NULL) return NULL;
- return create_nstring (s, strlen (s), &hash);
-}
-
-void _SLfree_hashed_string (char *s, unsigned int len, unsigned long hash)
-{
- if ((s == NULL) || (len < 2)) return;
- free_long_string (s, len, hash);
-}
-
-
-char *_SLallocate_slstring (unsigned int len)
-{
- SLstring_Type *sls = allocate_sls (len);
- if (sls == NULL)
- return NULL;
-
- return sls->bytes;
-}
-
-void _SLunallocate_slstring (char *s, unsigned int len)
-{
- SLstring_Type *sls;
-
- if (s == NULL)
- return;
-
- sls = (SLstring_Type *) (s - offsetof(SLstring_Type,bytes[0]));
- free_sls (sls, len);
-}
-
-char *_SLcreate_via_alloced_slstring (char *s, unsigned int len)
-{
- unsigned long hash;
- SLstring_Type *sls;
-
- if (s == NULL)
- return NULL;
-
- if (len < 2)
- {
- char *s1 = create_short_string (s, len);
- _SLunallocate_slstring (s, len);
- return s1;
- }
-
- /* s is not going to be in the cache because when it was malloced, its
- * value was unknown. This simplifies the coding.
- */
- hash = _SLstring_hash ((unsigned char *)s, (unsigned char *)s + len);
- sls = find_string (s, len, hash);
- if (sls != NULL)
- {
- sls->ref_count++;
- _SLunallocate_slstring (s, len);
- s = sls->bytes;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- cache_string (sls, len, hash);
-#endif
- return s;
- }
-
- sls = (SLstring_Type *) (s - offsetof(SLstring_Type,bytes[0]));
- sls->ref_count = 1;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
- cache_string (sls, len, hash);
-#endif
-
- hash = hash % SLSTRING_HASH_TABLE_SIZE;
- sls->next = String_Hash_Table [(unsigned int)hash];
- String_Hash_Table [(unsigned int)hash] = sls;
-
- return s;
-}
-
-/* Note, a and b may be ordinary strings. The result is an slstring */
-char *SLang_concat_slstrings (char *a, char *b)
-{
- unsigned int lena, len;
- char *c;
-
- lena = strlen (a);
- len = lena + strlen (b);
-
- c = _SLallocate_slstring (len);
- if (c == NULL)
- return NULL;
-
- strcpy (c, a);
- strcpy (c + lena, b);
-
- return _SLcreate_via_alloced_slstring (c, len);
-}
-
diff --git a/mdk-stage1/slang/slstrops.c b/mdk-stage1/slang/slstrops.c
deleted file mode 100644
index a57ef6389..000000000
--- a/mdk-stage1/slang/slstrops.c
+++ /dev/null
@@ -1,1686 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* string manipulation functions for S-Lang. */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-/*{{{ Include Files */
-
-#include <time.h>
-
-#ifndef __QNX__
-# if defined(__GO32__) || defined(__WATCOMC__)
-# include <dos.h>
-# include <bios.h>
-# endif
-#endif
-
-#if SLANG_HAS_FLOAT
-#include <math.h>
-#endif
-
-#include <string.h>
-#include <stdarg.h>
-#include <ctype.h>
-
-#ifndef isdigit
-# define isdigit(x) (((x) >= '0') && ((x) <= '9'))
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-/*}}}*/
-
-#define USE_ALLOC_STSTRING 1
-
-/*{{{ Utility Functions */
-
-static char Utility_Char_Table [256];
-static unsigned char WhiteSpace_Lut[256];
-
-static void set_utility_char_table (char *pos) /*{{{*/
-{
- register char *t = Utility_Char_Table, *tmax;
- register unsigned char ch;
-
- tmax = t + 256;
- while (t < tmax) *t++ = 0;
-
- t = Utility_Char_Table;
- while ((ch = (unsigned char) *pos++) != 0) t[ch] = 1;
-}
-
-/*}}}*/
-
-_INLINE_
-static unsigned char *make_whitespace_lut (void)
-{
- if (WhiteSpace_Lut[' '] != 1)
- {
- WhiteSpace_Lut[' '] = WhiteSpace_Lut['\r']
- = WhiteSpace_Lut ['\n'] = WhiteSpace_Lut['\t']
- = WhiteSpace_Lut ['\f'] = 1;
- }
- return WhiteSpace_Lut;
-}
-
-static unsigned char *make_lut (unsigned char *s, unsigned char *lut)
-{
- int reverse = 0;
-
- if (*s == '^')
- {
- reverse = 1;
- s++;
- }
- SLmake_lut (lut, s, reverse);
- return lut;
-}
-
-static unsigned int do_trim (char **beg, int do_beg,
- char **end, int do_end,
- char *white) /*{{{*/
-{
- unsigned int len;
- char *a, *b;
-
- set_utility_char_table (white);
-
- a = *beg;
- len = strlen (a);
- b = a + len;
-
- if (do_beg)
- while (Utility_Char_Table[(unsigned char) *a]) a++;
-
- if (do_end)
- {
- b--;
- while ((b >= a) && (Utility_Char_Table[(unsigned char) *b])) b--;
- b++;
- }
-
- len = (unsigned int) (b - a);
- *beg = a;
- *end = b;
- return len;
-}
-
-/*}}}*/
-
-/*}}}*/
-
-static int pop_3_strings (char **a, char **b, char **c)
-{
- *a = *b = *c = NULL;
- if (-1 == SLpop_string (c))
- return -1;
-
- if (-1 == SLpop_string (b))
- {
- SLfree (*c);
- *c = NULL;
- return -1;
- }
-
- if (-1 == SLpop_string (a))
- {
- SLfree (*b);
- SLfree (*c);
- *b = *c = NULL;
- return -1;
- }
-
- return 0;
-}
-
-static void free_3_strings (char *a, char *b, char *c)
-{
- SLfree (a);
- SLfree (b);
- SLfree (c);
-}
-
-static void strcat_cmd (void) /*{{{*/
-{
- char *c, *c1;
- int nargs;
- int i;
- char **ptrs;
- unsigned int len;
-#if !USE_ALLOC_STSTRING
- char buf[256];
-#endif
- nargs = SLang_Num_Function_Args;
- if (nargs <= 0) nargs = 2;
-
- if (NULL == (ptrs = (char **)SLmalloc (nargs * sizeof (char *))))
- return;
-
- memset ((char *) ptrs, 0, sizeof (char *) * nargs);
-
- c = NULL;
- i = nargs;
- len = 0;
- while (i != 0)
- {
- char *s;
-
- i--;
- if (-1 == SLang_pop_slstring (&s))
- goto free_and_return;
- ptrs[i] = s;
- len += strlen (s);
- }
-#if USE_ALLOC_STSTRING
- if (NULL == (c = _SLallocate_slstring (len)))
- goto free_and_return;
-#else
- len++; /* \0 char */
- if (len <= sizeof (buf))
- c = buf;
- else if (NULL == (c = SLmalloc (len)))
- goto free_and_return;
-#endif
-
- c1 = c;
- for (i = 0; i < nargs; i++)
- {
- strcpy (c1, ptrs[i]);
- c1 += strlen (c1);
- }
-
- free_and_return:
- for (i = 0; i < nargs; i++)
- SLang_free_slstring (ptrs[i]);
- SLfree ((char *) ptrs);
-
-#if USE_ALLOC_STSTRING
- (void) _SLpush_alloced_slstring (c, len);
-#else
- if (c != buf)
- (void) SLang_push_malloced_string (c); /* NULL ok */
- else
- (void) SLang_push_string (c);
-#endif
-}
-
-/*}}}*/
-
-static int _SLang_push_nstring (char *a, unsigned int len)
-{
- a = SLang_create_nslstring (a, len);
- if (a == NULL)
- return -1;
-
- return _SLang_push_slstring (a);
-}
-
-
-static void strtrim_cmd_internal (char *str, int do_beg, int do_end)
-{
- char *beg, *end, *white;
- int free_str;
- unsigned int len;
-
- /* Go through SLpop_string to get a private copy since it will be
- * modified.
- */
-
- free_str = 0;
- if (SLang_Num_Function_Args == 2)
- {
- white = str;
- if (-1 == SLang_pop_slstring (&str))
- return;
- free_str = 1;
- }
- else white = " \t\f\r\n";
-
- beg = str;
- len = do_trim (&beg, do_beg, &end, do_end, white);
-
- (void) _SLang_push_nstring (beg, len);
- if (free_str)
- SLang_free_slstring (str);
-}
-
-
-static void strtrim_cmd (char *str)
-{
- strtrim_cmd_internal (str, 1, 1);
-}
-
-static void strtrim_beg_cmd (char *str)
-{
- strtrim_cmd_internal (str, 1, 0);
-}
-
-static void strtrim_end_cmd (char *str)
-{
- strtrim_cmd_internal (str, 0, 1);
-}
-
-
-static void strcompress_cmd (void) /*{{{*/
-{
- char *str, *white, *c;
- unsigned char *s, *beg, *end;
- unsigned int len;
- char pref_char;
-
- if (SLpop_string (&white)) return;
- if (SLpop_string (&str))
- {
- SLfree (white);
- return;
- }
-
- /* The first character of white is the preferred whitespace character */
- pref_char = *white;
-
- beg = (unsigned char *) str;
- (void) do_trim ((char **) &beg, 1, (char **) &end, 1, white);
- SLfree (white);
-
- /* Determine the effective length */
- len = 0;
- s = (unsigned char *) beg;
- while (s < end)
- {
- len++;
- if (Utility_Char_Table[*s++])
- {
- while ((s < end) && Utility_Char_Table[*s]) s++;
- }
- }
-
-#if USE_ALLOC_STSTRING
- c = _SLallocate_slstring (len);
-#else
- c = SLmalloc (len + 1);
-#endif
- if (c == NULL)
- {
- SLfree (str);
- return;
- }
-
- s = (unsigned char *) c;
-
- while (beg < end)
- {
- unsigned char ch = *beg++;
-
- if (0 == Utility_Char_Table[ch])
- {
- *s++ = ch;
- continue;
- }
-
- *s++ = (unsigned char) pref_char;
-
- while ((beg < end) && Utility_Char_Table[*beg])
- beg++;
- }
-
- *s = 0;
-
-#if USE_ALLOC_STSTRING
- (void) _SLpush_alloced_slstring (c, len);
-#else
- SLang_push_malloced_string(c);
-#endif
-
- SLfree(str);
-}
-
-/*}}}*/
-
-static int str_replace_cmd_1 (char *orig, char *match, char *rep, unsigned int max_num_replaces,
- char **new_strp) /*{{{*/
-{
- char *s, *t, *new_str;
- unsigned int rep_len, match_len, new_len;
- unsigned int num_replaces;
-
- *new_strp = NULL;
-
- match_len = strlen (match);
-
- if (match_len == 0)
- return 0;
-
- num_replaces = 0;
- s = orig;
- while (num_replaces < max_num_replaces)
- {
- s = strstr (s, match);
- if (s == NULL)
- break;
- s += match_len;
- num_replaces++;
- }
-
- if (num_replaces == 0)
- return 0;
-
- max_num_replaces = num_replaces;
-
- rep_len = strlen (rep);
-
- new_len = (strlen (orig) - num_replaces * match_len) + num_replaces * rep_len;
- new_str = SLmalloc (new_len + 1);
- if (new_str == NULL)
- return -1;
-
- s = orig;
- t = new_str;
-
- for (num_replaces = 0; num_replaces < max_num_replaces; num_replaces++)
- {
- char *next_s;
- unsigned int len;
-
- next_s = strstr (s, match); /* cannot be NULL */
- len = (unsigned int) (next_s - s);
- strncpy (t, s, len);
- t += len;
- strcpy (t, rep);
- t += rep_len;
-
- s = next_s + match_len;
- }
- strcpy (t, s);
- *new_strp = new_str;
-
- return (int) num_replaces;
-}
-
-/*}}}*/
-
-static void reverse_string (char *a)
-{
- char *b;
-
- b = a + strlen (a);
- while (b > a)
- {
- char ch;
-
- b--;
- ch = *a;
- *a++ = *b;
- *b = ch;
- }
-}
-
-static int strreplace_cmd (int *np)
-{
- char *orig, *match, *rep;
- char *new_str;
- int max_num_replaces;
- int ret;
-
- max_num_replaces = *np;
-
- if (-1 == pop_3_strings (&orig, &match, &rep))
- return -1;
-
- if (max_num_replaces < 0)
- {
- reverse_string (orig);
- reverse_string (match);
- reverse_string (rep);
- ret = str_replace_cmd_1 (orig, match, rep, -max_num_replaces, &new_str);
- if (ret > 0) reverse_string (new_str);
- else if (ret == 0)
- reverse_string (orig);
- }
- else ret = str_replace_cmd_1 (orig, match, rep, max_num_replaces, &new_str);
-
- if (ret == 0)
- {
- if (-1 == SLang_push_malloced_string (orig))
- ret = -1;
- orig = NULL;
- }
- else if (ret > 0)
- {
- if (-1 == SLang_push_malloced_string (new_str))
- ret = -1;
- }
-
- free_3_strings (orig, match, rep);
- return ret;
-}
-
-static int str_replace_cmd (char *orig, char *match, char *rep)
-{
- char *s;
- int ret;
-
- ret = str_replace_cmd_1 (orig, match, rep, 1, &s);
- if (ret == 1)
- (void) SLang_push_malloced_string (s);
- return ret;
-}
-
-
-
-static void strtok_cmd (char *str)
-{
- _SLString_List_Type sl;
- unsigned char white_buf[256];
- char *s;
- unsigned char *white;
-
- if (SLang_Num_Function_Args == 1)
- white = make_whitespace_lut ();
- else
- {
- white = white_buf;
- make_lut ((unsigned char *)str, white);
- if (-1 == SLang_pop_slstring (&str))
- return;
- }
-
- if (-1 == _SLstring_list_init (&sl, 256, 1024))
- goto the_return;
-
- s = str;
- while (*s != 0)
- {
- char *s0;
-
- s0 = s;
- /* Skip whitespace */
- while ((*s0 != 0) && (0 != white[(unsigned char)*s0]))
- s0++;
-
- if (*s0 == 0)
- break;
-
- s = s0;
- while ((*s != 0) && (0 == white[(unsigned char) *s]))
- s++;
-
- /* sl deleted upon failure */
- if (-1 == _SLstring_list_append (&sl, SLang_create_nslstring (s0, (unsigned int) (s - s0))))
- goto the_return;
- }
-
- /* Deletes sl */
- (void) _SLstring_list_push (&sl);
-
- the_return:
- if (white == white_buf)
- SLang_free_slstring (str);
-}
-
-/* This routine returns the string with text removed between single character
- comment delimiters from the set b and e. */
-
-static void str_uncomment_string_cmd (char *str, char *b, char *e) /*{{{*/
-{
- unsigned char chb, che;
- unsigned char *s, *cbeg, *mark;
-
- if (strlen(b) != strlen(e))
- {
- SLang_doerror ("Comment delimiter length mismatch.");
- return;
- }
-
- set_utility_char_table (b);
-
- if (NULL == (str = (char *) SLmake_string(str))) return;
-
- s = (unsigned char *) str;
-
- while ((chb = *s++) != 0)
- {
- if (Utility_Char_Table [chb] == 0) continue;
-
- mark = s - 1;
-
- cbeg = (unsigned char *) b;
- while (*cbeg != chb) cbeg++;
-
- che = (unsigned char) *(e + (int) (cbeg - (unsigned char *) b));
-
- while (((chb = *s++) != 0) && (chb != che));
-
- if (chb == 0)
- {
- /* end of string and end not found. Just truncate it a return; */
- *mark = 0;
- break;
- }
-
- strcpy ((char *) mark, (char *)s);
- s = mark;
- }
- SLang_push_malloced_string (str);
-}
-
-/*}}}*/
-
-static void str_quote_string_cmd (char *str, char *quotes, int *slash_ptr) /*{{{*/
-{
- char *q;
- int slash;
- unsigned int len;
- register char *t, *s, *q1;
- register unsigned char ch;
-
- slash = *slash_ptr;
-
- if ((slash > 255) || (slash < 0))
- {
- SLang_Error = SL_INVALID_PARM;
- return;
- }
-
- /* setup the utility table to have 1s at quote char postitions. */
- set_utility_char_table (quotes);
-
- t = Utility_Char_Table;
- t[(unsigned int) slash] = 1;
-
- /* calculate length */
- s = str;
- len = 0;
- while ((ch = (unsigned char) *s++) != 0) if (t[ch]) len++;
- len += (unsigned int) (s - str);
-
- if (NULL != (q = SLmalloc(len)))
- {
- s = str; q1 = q;
- while ((ch = (unsigned char) *s++) != 0)
- {
- if (t[ch]) *q1++ = slash;
- *q1++ = (char) ch;
- }
- *q1 = 0;
- SLang_push_malloced_string(q);
- }
-}
-
-/*}}}*/
-
-/* returns the position of substrin in a string or null */
-static int issubstr_cmd (char *a, char *b) /*{{{*/
-{
- char *c;
-
- if (NULL == (c = (char *) strstr(a, b)))
- return 0;
-
- return 1 + (int) (c - a);
-}
-
-/*}}}*/
-
-/* returns to stack string at pos n to n + m of a */
-static void substr_cmd (char *a, int *n_ptr, int *m_ptr) /*{{{*/
-{
- int n, m;
- int lena;
-
- n = *n_ptr;
- m = *m_ptr;
-
- lena = strlen (a);
- if (n > lena) n = lena + 1;
- if (n < 1)
- {
- SLang_Error = SL_INVALID_PARM;
- return;
- }
-
- n--;
- if (m < 0) m = lena;
- if (n + m > lena) m = lena - n;
-
- (void) _SLang_push_nstring (a + n, (unsigned int) m);
-}
-
-/*}}}*/
-
-/* substitute char m at positin string n in string*/
-static void strsub_cmd (int *nptr, int *mptr) /*{{{*/
-{
- char *a;
- int n, m;
- unsigned int lena;
-
- if (-1 == SLpop_string (&a))
- return;
-
- n = *nptr;
- m = *mptr;
-
- lena = strlen (a);
-
- if ((n <= 0) || (lena < (unsigned int) n))
- {
- SLang_Error = SL_INVALID_PARM;
- SLfree(a);
- return;
- }
-
- a[n - 1] = (char) m;
-
- SLang_push_malloced_string (a);
-}
-
-/*}}}*/
-
-static void strup_cmd(void) /*{{{*/
-{
- unsigned char c, *a;
- char *str;
-
- if (SLpop_string (&str))
- return;
-
- a = (unsigned char *) str;
- while ((c = *a) != 0)
- {
- /* if ((*a >= 'a') && (*a <= 'z')) *a -= 32; */
- *a = UPPER_CASE(c);
- a++;
- }
-
- SLang_push_malloced_string (str);
-}
-
-/*}}}*/
-
-static int isdigit_cmd (char *what) /*{{{*/
-{
- return isdigit((unsigned char)*what);
-}
-
-/*}}}*/
-static int toupper_cmd (int *ch) /*{{{*/
-{
- return UPPER_CASE(*ch);
-}
-
-/*}}}*/
-
-static int tolower_cmd (int *ch) /*{{{*/
-{
- return LOWER_CASE(*ch);
-}
-
-/*}}}*/
-
-static void strlow_cmd (void) /*{{{*/
-{
- unsigned char c, *a;
- char *str;
-
- if (SLpop_string(&str)) return;
- a = (unsigned char *) str;
- while ((c = *a) != 0)
- {
- /* if ((*a >= 'a') && (*a <= 'z')) *a -= 32; */
- *a = LOWER_CASE(c);
- a++;
- }
-
- SLang_push_malloced_string ((char *) str);
-}
-
-/*}}}*/
-
-static SLang_Array_Type *do_strchop (char *str, int delim, int quote)
-{
- int count;
- char *s0, *elm;
- register char *s1;
- register unsigned char ch;
- int quoted;
- SLang_Array_Type *at;
- char **data;
-
- if ((quote < 0) || (quote > 255)
- || (delim <= 0) || (delim > 255))
- {
- SLang_Error = SL_INVALID_PARM;
- return NULL;
- }
-
- s1 = s0 = str;
-
- quoted = 0;
- count = 1; /* at least 1 */
- while (1)
- {
- ch = (unsigned char) *s1++;
- if ((ch == quote) && quote)
- {
- if (*s1 == 0)
- break;
-
- s1++;
- continue;
- }
-
- if (ch == delim)
- {
- count++;
- continue;
- }
-
- if (ch == 0)
- break;
- }
-
- if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &count, 1)))
- return NULL;
-
- data = (char **)at->data;
-
- count = 0;
- s1 = s0;
-
- while (1)
- {
- ch = (unsigned char) *s1;
-
- if ((ch == quote) && quote)
- {
- s1++;
- if (*s1 != 0) s1++;
- quoted = 1;
- continue;
- }
-
- if ((ch == delim) || (ch == 0))
- {
- if (quoted == 0)
- elm = SLang_create_nslstring (s0, (unsigned int) (s1 - s0));
- else
- {
- register char ch1, *p, *p1;
- char *tmp;
-
- tmp = SLmake_nstring (s0, (unsigned int)(s1 - s0));
- if (tmp == NULL)
- break;
-
- /* Now unquote it */
- p = p1 = tmp;
- do
- {
- ch1 = *p1++;
- if (ch1 == '\\') ch1 = *p1++;
- *p++ = ch1;
- }
- while (ch1 != 0);
- quoted = 0;
-
- elm = SLang_create_slstring (tmp);
- SLfree (tmp);
- }
-
- if (elm == NULL)
- break;
-
- data[count] = elm;
- count++;
-
- if (ch == 0)
- return at;
-
- s1++; /* skip past delim */
- s0 = s1; /* and reset */
- }
- else s1++;
- }
-
- SLang_free_array (at);
- return NULL;
-}
-
-static void strchop_cmd (char *str, int *q, int *d)
-{
- (void) SLang_push_array (do_strchop (str, *q, *d), 1);
-}
-
-static void strchopr_cmd (char *str, int *q, int *d)
-{
- SLang_Array_Type *at;
-
- if (NULL != (at = do_strchop (str, *q, *d)))
- {
- char **d0, **d1;
-
- d0 = (char **) at->data;
- d1 = d0 + (at->num_elements - 1);
-
- while (d0 < d1)
- {
- char *tmp;
-
- tmp = *d0;
- *d0 = *d1;
- *d1 = tmp;
- d0++;
- d1--;
- }
- }
- SLang_push_array (at, 1);
-}
-
-static int strcmp_cmd (char *a, char *b) /*{{{*/
-{
- return strcmp(a, b);
-}
-
-/*}}}*/
-
-static int strncmp_cmd (char *a, char *b, int *n) /*{{{*/
-{
- return strncmp(a, b, (unsigned int) *n);
-}
-
-/*}}}*/
-
-static int strlen_cmd (char *s) /*{{{*/
-{
- return (int) strlen (s);
-}
-/*}}}*/
-
-static void extract_element_cmd (char *list, int *nth_ptr, int *delim_ptr)
-{
- char buf[1024], *b;
-
- b = buf;
- if (-1 == SLextract_list_element (list, *nth_ptr, *delim_ptr, buf, sizeof(buf)))
- b = NULL;
-
- SLang_push_string (b);
-}
-
-/* sprintf functionality for S-Lang */
-
-static char *SLdo_sprintf (char *fmt) /*{{{*/
-{
- register char *p = fmt, ch;
- char *out = NULL, *outp = NULL;
- char dfmt[1024]; /* used to hold part of format */
- char *f;
- VOID_STAR varp;
- int want_width, width, precis, use_varp, int_var;
- long long_var;
- unsigned int len = 0, malloc_len = 0, dlen;
- int do_free, guess_size;
-#if SLANG_HAS_FLOAT
- int tmp1, tmp2, use_double;
- double x;
-#endif
- int use_long = 0;
-
- while (1)
- {
- while ((ch = *p) != 0)
- {
- if (ch == '%')
- break;
- p++;
- }
-
- /* p points at '%' or 0 */
-
- dlen = (unsigned int) (p - fmt);
-
- if (len + dlen >= malloc_len)
- {
- malloc_len = len + dlen;
- if (out == NULL) outp = SLmalloc(malloc_len + 1);
- else outp = SLrealloc(out, malloc_len + 1);
- if (NULL == outp)
- return out;
- out = outp;
- outp = out + len;
- }
-
- strncpy(outp, fmt, dlen);
- len += dlen;
- outp = out + len;
- *outp = 0;
- if (ch == 0) break;
-
- /* bump it beyond '%' */
- ++p;
- fmt = p;
-
- f = dfmt;
- *f++ = ch;
- /* handle flag char */
- ch = *p++;
-
- /* Make sure cases such as "% #g" can be handled. */
- if ((ch == '-') || (ch == '+') || (ch == ' ') || (ch == '#'))
- {
- *f++ = ch;
- ch = *p++;
- if ((ch == '-') || (ch == '+') || (ch == ' ') || (ch == '#'))
- {
- *f++ = ch;
- ch = *p++;
- }
- }
-
-
- /* width */
- /* I have got to parse it myself so that I can see how big it needs
- * to be.
- */
- want_width = width = 0;
- if (ch == '*')
- {
- if (SLang_pop_integer(&width)) return (out);
- want_width = 1;
- ch = *p++;
- }
- else
- {
- if (ch == '0')
- {
- *f++ = '0';
- ch = *p++;
- }
-
- while ((ch <= '9') && (ch >= '0'))
- {
- width = width * 10 + (ch - '0');
- ch = *p++;
- want_width = 1;
- }
- }
-
- if (want_width)
- {
- sprintf(f, "%d", width);
- f += strlen (f);
- }
- precis = 0;
- /* precision -- also indicates max number of chars from string */
- if (ch == '.')
- {
- *f++ = ch;
- ch = *p++;
- want_width = 0;
- if (ch == '*')
- {
- if (SLang_pop_integer(&precis)) return (out);
- ch = *p++;
- want_width = 1;
- }
- else while ((ch <= '9') && (ch >= '0'))
- {
- precis = precis * 10 + (ch - '0');
- ch = *p++;
- want_width = 1;
- }
- if (want_width)
- {
- sprintf(f, "%d", precis);
- f += strlen (f);
- }
- else precis = 0;
- }
-
- long_var = 0;
- int_var = 0;
- varp = NULL;
- guess_size = 32;
-#if SLANG_HAS_FLOAT
- use_double = 0;
-#endif
- use_long = 0;
- use_varp = 0;
- do_free = 0;
-
- if (ch == 'l')
- {
- use_long = 1;
- ch = *p++;
- }
- else if (ch == 'h') ch = *p++; /* not supported */
-
- /* Now the actual format specifier */
- switch (ch)
- {
- case 'S':
- _SLstring_intrinsic ();
- ch = 's';
- /* drop */
- case 's':
- if (SLang_pop_slstring((char **) &varp)) return (out);
- do_free = 1;
- guess_size = strlen((char *) varp);
- use_varp = 1;
- break;
-
- case '%':
- guess_size = 1;
- do_free = 0;
- use_varp = 1;
- varp = (VOID_STAR) "%";
- break;
-
- case 'c': guess_size = 1;
- use_long = 0;
- /* drop */
- case 'd':
- case 'i':
- case 'o':
- case 'u':
- case 'X':
- case 'x':
- if (SLang_pop_long (&long_var)) return(out);
- if (use_long == 0)
- int_var = (int) long_var;
- else
- *f++ = 'l';
- break;
-
- case 'f':
- case 'e':
- case 'g':
- case 'E':
- case 'G':
-#if SLANG_HAS_FLOAT
- if (SLang_pop_double(&x, &tmp1, &tmp2)) return (out);
- use_double = 1;
- guess_size = 256;
- (void) tmp1; (void) tmp2;
- use_long = 0;
- break;
-#endif
- case 'p':
- guess_size = 32;
- /* Pointer type?? Why?? */
- if (-1 == SLdo_pop ())
- return out;
- varp = (VOID_STAR) _SLStack_Pointer;
- use_varp = 1;
- use_long = 0;
- break;
-
- default:
- SLang_doerror("Invalid Format.");
- return(out);
- }
- *f++ = ch; *f = 0;
-
- width = width + precis;
- if (width > guess_size) guess_size = width;
-
- if (len + guess_size > malloc_len)
- {
- outp = (char *) SLrealloc(out, len + guess_size + 1);
- if (outp == NULL)
- {
- SLang_Error = SL_MALLOC_ERROR;
- return (out);
- }
- out = outp;
- outp = out + len;
- malloc_len = len + guess_size;
- }
-
- if (use_varp)
- {
- sprintf(outp, dfmt, varp);
- if (do_free) SLang_free_slstring ((char *)varp);
- }
-#if SLANG_HAS_FLOAT
- else if (use_double) sprintf(outp, dfmt, x);
-#endif
- else if (use_long) sprintf (outp, dfmt, long_var);
- else sprintf(outp, dfmt, int_var);
-
- len += strlen(outp);
- outp = out + len;
- fmt = p;
- }
-
- if (out != NULL)
- {
- outp = SLrealloc (out, (unsigned int) (outp - out) + 1);
- if (outp != NULL) out = outp;
- }
-
- return (out);
-}
-
-/*}}}*/
-
-int _SLstrops_do_sprintf_n (int n) /*{{{*/
-{
- char *p;
- char *fmt;
- SLang_Object_Type *ptr;
- int ofs;
-
- if (-1 == (ofs = SLreverse_stack (n + 1)))
- return -1;
-
- ptr = _SLRun_Stack + ofs;
-
- if (SLang_pop_slstring(&fmt))
- return -1;
-
- p = SLdo_sprintf (fmt);
- SLang_free_slstring (fmt);
-
- while (_SLStack_Pointer > ptr)
- SLdo_pop ();
-
- if (SLang_Error)
- {
- SLfree (p);
- return -1;
- }
-
- return SLang_push_malloced_string (p);
-}
-
-/*}}}*/
-
-static void sprintf_n_cmd (int *n)
-{
- _SLstrops_do_sprintf_n (*n);
-}
-
-static void sprintf_cmd (void)
-{
- _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 1); /* do not include format */
-}
-
-/* converts string s to a form that can be used in an eval */
-static void make_printable_string(char *s) /*{{{*/
-{
- unsigned int len;
- register char *s1 = s, ch, *ss1;
- char *ss;
-
- /* compute length */
- len = 3;
- while ((ch = *s1++) != 0)
- {
- if ((ch == '\n') || (ch == '\\') || (ch == '"')) len++;
- len++;
- }
-
- if (NULL == (ss = SLmalloc(len)))
- return;
-
- s1 = s;
- ss1 = ss;
- *ss1++ = '"';
- while ((ch = *s1++) != 0)
- {
- if (ch == '\n')
- {
- ch = 'n';
- *ss1++ = '\\';
- }
- else if ((ch == '\\') || (ch == '"'))
- {
- *ss1++ = '\\';
- }
- *ss1++ = ch;
- }
- *ss1++ = '"';
- *ss1 = 0;
- if (-1 == SLang_push_string (ss))
- SLfree (ss);
-}
-
-/*}}}*/
-
-static int is_list_element_cmd (char *list, char *elem, int *d_ptr)
-{
- char ch;
- int d, n;
- unsigned int len;
- char *lbeg, *lend;
-
- d = *d_ptr;
-
- len = strlen (elem);
-
- n = 1;
- lend = list;
-
- while (1)
- {
- lbeg = lend;
- while ((0 != (ch = *lend)) && (ch != (char) d)) lend++;
-
- if ((lbeg + len == lend)
- && (0 == strncmp (elem, lbeg, len)))
- break;
-
- if (ch == 0)
- {
- n = 0;
- break;
- }
- lend++; /* skip delim */
- n++;
- }
-
- return n;
-}
-
-/*}}}*/
-
-/* Regular expression routines for strings */
-static SLRegexp_Type regexp_reg;
-
-static int string_match_cmd (char *str, char *pat, int *nptr) /*{{{*/
-{
- int n;
- unsigned int len;
- unsigned char rbuf[512], *match;
-
- n = *nptr;
-
- regexp_reg.case_sensitive = 1;
- regexp_reg.buf = rbuf;
- regexp_reg.pat = (unsigned char *) pat;
- regexp_reg.buf_len = sizeof (rbuf);
-
- if (SLang_regexp_compile (&regexp_reg))
- {
- SLang_verror (SL_INVALID_PARM, "Unable to compile pattern");
- return -1;
- }
-
- n--;
- len = strlen(str);
- if ((n < 0) || ((unsigned int) n >= len))
- {
- /* SLang_Error = SL_INVALID_PARM; */
- return 0;
- }
-
- str += n;
- len -= n;
-
- if (NULL == (match = SLang_regexp_match((unsigned char *) str, len, &regexp_reg)))
- return 0;
-
- /* adjust offsets */
- regexp_reg.offset = n;
-
- return (1 + (int) ((char *) match - str));
-}
-
-/*}}}*/
-
-static int string_match_nth_cmd (int *nptr) /*{{{*/
-{
- int n, beg;
-
- n = *nptr;
-
- if ((n < 0) || (n > 9) || (regexp_reg.pat == NULL)
- || ((beg = regexp_reg.beg_matches[n]) == -1))
- {
- SLang_Error = SL_INVALID_PARM;
- return -1;
- }
- SLang_push_integer(beg + regexp_reg.offset);
- return regexp_reg.end_matches[n];
-}
-
-/*}}}*/
-
-static char *create_delimited_string (char **list, unsigned int n,
- char *delim)
-{
- unsigned int len, dlen;
- unsigned int i;
- unsigned int num;
- char *str, *s;
-
- len = 1; /* allow room for \0 char */
- num = 0;
- for (i = 0; i < n; i++)
- {
- if (list[i] == NULL) continue;
- len += strlen (list[i]);
- num++;
- }
-
- dlen = strlen (delim);
- if (num > 1)
- len += (num - 1) * dlen;
-
- if (NULL == (str = SLmalloc (len)))
- return NULL;
-
- *str = 0;
- s = str;
- i = 0;
-
- while (num > 1)
- {
- while (list[i] == NULL)
- i++;
-
- strcpy (s, list[i]);
- s += strlen (list[i]);
- strcpy (s, delim);
- s += dlen;
- i++;
- num--;
- }
-
- if (num)
- {
- while (list[i] == NULL)
- i++;
-
- strcpy (s, list[i]);
- }
-
- return str;
-}
-
-static void create_delimited_string_cmd (int *nptr)
-{
- unsigned int n, i;
- char **strings;
- char *str;
-
- str = NULL;
-
- n = 1 + (unsigned int) *nptr; /* n includes delimiter */
-
- if (NULL == (strings = (char **)SLmalloc (n * sizeof (char *))))
- {
- SLdo_pop_n (n);
- return;
- }
- memset((char *)strings, 0, n * sizeof (char *));
-
- i = n;
- while (i != 0)
- {
- i--;
- if (-1 == SLang_pop_slstring (strings + i))
- goto return_error;
- }
-
- str = create_delimited_string (strings + 1, (n - 1), strings[0]);
- /* drop */
- return_error:
- for (i = 0; i < n; i++) SLang_free_slstring (strings[i]);
- SLfree ((char *)strings);
-
- (void) SLang_push_malloced_string (str); /* NULL Ok */
-}
-
-static void strjoin_cmd (char *delim)
-{
- SLang_Array_Type *at;
- char *str;
-
- if (-1 == SLang_pop_array_of_type (&at, SLANG_STRING_TYPE))
- return;
-
- str = create_delimited_string ((char **)at->data, at->num_elements, delim);
- SLang_free_array (at);
- (void) SLang_push_malloced_string (str); /* NULL Ok */
-}
-
-static void str_delete_chars_cmd (char *s, char *d)
-{
- unsigned char lut[256];
- unsigned char *s1, *s2;
- unsigned char ch;
-
- make_lut ((unsigned char *)d, lut);
- if (NULL == (s = SLmake_string (s)))
- return;
-
- s1 = s2 = (unsigned char *) s;
- while ((ch = *s2++) != 0)
- {
- if (0 == lut[ch])
- *s1++ = ch;
- }
- *s1 = 0;
-
- (void) SLang_push_malloced_string (s);
-}
-
-static unsigned char *make_lut_string (unsigned char *s)
-{
- unsigned char lut[256];
- unsigned char *l;
- unsigned int i;
-
- /* Complement-- a natural order is imposed */
- make_lut (s, lut);
- l = lut;
- for (i = 1; i < 256; i++)
- {
- if (lut[i])
- *l++ = (unsigned char) i;
- }
- *l = 0;
- return (unsigned char *) SLmake_string ((char *)lut);
-}
-
-static unsigned char *make_str_range (unsigned char *s)
-{
- unsigned char *s1, *range;
- unsigned int num;
- unsigned char ch;
- int len;
-
- if (*s == '^')
- return make_lut_string (s);
-
- num = 0;
- s1 = s;
- while ((ch = *s1++) != 0)
- {
- unsigned char ch1;
-
- ch1 = *s1;
- if (ch1 == '-')
- {
- s1++;
- ch1 = *s1;
- len = (int)ch1 - (int)ch;
- if (len < 0)
- len = -len;
-
- num += (unsigned int) len;
- if (ch1 != 0)
- s1++;
- }
-
- num++;
- }
-
- range = (unsigned char *)SLmalloc (num + 1);
- if (range == NULL)
- return NULL;
-
- s1 = s;
- s = range;
- while ((ch = *s1++) != 0)
- {
- unsigned char ch1;
- unsigned int i;
-
- ch1 = *s1;
- if (ch1 != '-')
- {
- *s++ = ch;
- continue;
- }
-
- s1++;
- ch1 = *s1;
-
- if (ch > ch1)
- {
- if (ch1 == 0)
- ch1 = 1;
-
- for (i = (unsigned int) ch; i >= (unsigned int) ch1; i--)
- *s++ = (unsigned char) i;
-
- if (*s1 == 0)
- break;
- }
- else
- {
- for (i = (unsigned int) ch; i <= (unsigned int) ch1; i++)
- *s++ = (unsigned char) i;
- }
- s1++;
- }
-
-#if 0
- if (range + num != s)
- SLang_verror (SL_INTERNAL_ERROR, "make_str_range: num wrong");
-#endif
- *s = 0;
-
- return range;
-}
-
-static void strtrans_cmd (char *s, unsigned char *from, unsigned char *to)
-{
- unsigned char map[256];
- char *s1;
- unsigned int i;
- unsigned char ch;
- unsigned char last_to;
- unsigned char *from_range, *to_range;
-
- for (i = 0; i < 256; i++) map[i] = (unsigned char) i;
-
- if (*to == 0)
- {
- str_delete_chars_cmd (s, (char *)from);
- return;
- }
-
- from_range = make_str_range (from);
- if (from_range == NULL)
- return;
- to_range = make_str_range (to);
- if (to_range == NULL)
- {
- SLfree ((char *)from_range);
- return;
- }
-
- from = from_range;
- to = to_range;
-
- last_to = 0;
- while ((ch = *from++) != 0)
- {
- unsigned char to_ch;
-
- if (0 == (to_ch = *to++))
- {
- do
- {
- map[ch] = last_to;
- }
- while (0 != (ch = *from++));
- break;
- }
-
- last_to = map[ch] = to_ch;
- }
-
- SLfree ((char *)from_range);
- SLfree ((char *)to_range);
-
- s = SLmake_string (s);
- if (s == NULL)
- return;
-
- s1 = s;
- while ((ch = (unsigned char) *s1) != 0)
- *s1++ = (char) map[ch];
-
- (void) SLang_push_malloced_string (s);
-}
-
-
-static SLang_Intrin_Fun_Type Strops_Table [] = /*{{{*/
-{
- MAKE_INTRINSIC_I("create_delimited_string", create_delimited_string_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SS("strcmp", strcmp_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_SSI("strncmp", strncmp_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_0("strcat", strcat_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("strlen", strlen_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_SII("strchop", strchop_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SII("strchopr", strchopr_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_I("strreplace", strreplace_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_SSS("str_replace", str_replace_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_SII("substr", substr_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SS("is_substr", issubstr_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_II("strsub", strsub_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SII("extract_element", extract_element_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SSI("is_list_element", is_list_element_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_SSI("string_match", string_match_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_I("string_match_nth", string_match_nth_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_0("strlow", strlow_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_I("tolower", tolower_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_I("toupper", toupper_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_0("strup", strup_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("isdigit", isdigit_cmd, SLANG_INT_TYPE),
- MAKE_INTRINSIC_S("strtrim", strtrim_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("strtrim_end", strtrim_end_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("strtrim_beg", strtrim_beg_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("strcompress", strcompress_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_I("Sprintf", sprintf_n_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("sprintf", sprintf_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("sscanf", _SLang_sscanf, SLANG_INT_TYPE),
- MAKE_INTRINSIC_S("make_printable_string", make_printable_string, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SSI("str_quote_string", str_quote_string_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SSS("str_uncomment_string", str_uncomment_string_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_II("define_case", SLang_define_case, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("strtok", strtok_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_S("strjoin", strjoin_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SSS("strtrans", strtrans_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_SS("str_delete_chars", str_delete_chars_cmd, SLANG_VOID_TYPE),
-
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-/*}}}*/
-
-int _SLang_init_slstrops (void)
-{
- return SLadd_intrin_fun_table (Strops_Table, NULL);
-}
diff --git a/mdk-stage1/slang/slstruct.c b/mdk-stage1/slang/slstruct.c
deleted file mode 100644
index 33d182373..000000000
--- a/mdk-stage1/slang/slstruct.c
+++ /dev/null
@@ -1,932 +0,0 @@
-/* Structure type implementation */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-void _SLstruct_delete_struct (_SLang_Struct_Type *s)
-{
- _SLstruct_Field_Type *field, *field_max;
-
- if (s == NULL) return;
-
- if (s->num_refs > 1)
- {
- s->num_refs -= 1;
- return;
- }
-
- field = s->fields;
- if (field != NULL)
- {
- field_max = field + s->nfields;
-
- while (field < field_max)
- {
- SLang_free_object (&field->obj);
- SLang_free_slstring (field->name); /* could be NULL */
- field++;
- }
- SLfree ((char *) s->fields);
- }
- SLfree ((char *) s);
-}
-
-static _SLang_Struct_Type *allocate_struct (unsigned int nfields)
-{
- _SLang_Struct_Type *s;
- _SLstruct_Field_Type *f;
- unsigned int i, size;
-
- s = (_SLang_Struct_Type *) SLmalloc (sizeof (_SLang_Struct_Type));
- if (s == NULL) return NULL;
-
- SLMEMSET((char *) s, 0, sizeof (_SLang_Struct_Type));
-
- size = nfields * sizeof(_SLstruct_Field_Type);
- if (NULL == (f = (_SLstruct_Field_Type *) SLmalloc (size)))
- {
- SLfree ((char *) s);
- return NULL;
- }
- SLMEMSET ((char *) f, 0, size);
- s->nfields = nfields;
- s->fields = f;
-
- /* By default, all structs will be created with elements set to NULL. I
- * do not know whether or not it is better to use SLANG_UNDEFINED_TYPE.
- */
- for (i = 0; i < nfields; i++)
- f[i].obj.data_type = SLANG_NULL_TYPE;
-
- return s;
-}
-
-static int push_struct_of_type (unsigned char type, _SLang_Struct_Type *s)
-{
- SLang_Object_Type obj;
-
- obj.data_type = type;
- obj.v.struct_val = s;
- s->num_refs += 1;
-
- if (0 == SLang_push (&obj))
- return 0;
-
- s->num_refs -= 1;
- return -1;
-}
-
-int _SLang_push_struct (_SLang_Struct_Type *s)
-{
- return push_struct_of_type (SLANG_STRUCT_TYPE, s);
-}
-
-int _SLang_pop_struct (_SLang_Struct_Type **sp)
-{
- SLang_Object_Type obj;
- SLang_Class_Type *cl;
- unsigned char type;
-
- if (0 != SLang_pop (&obj))
- return -1;
-
- type = obj.data_type;
- if (type != SLANG_STRUCT_TYPE)
- {
- cl = _SLclass_get_class (type);
- if (cl->cl_struct_def == NULL)
- {
- *sp = NULL;
- SLang_free_object (&obj);
- SLang_verror (SL_TYPE_MISMATCH,
- "Expecting struct type object. Found %s",
- cl->cl_name);
- return -1;
- }
- }
-
- *sp = obj.v.struct_val;
- return 0;
-}
-
-static void struct_destroy (unsigned char type, VOID_STAR vs)
-{
- (void) type;
- _SLstruct_delete_struct (*(_SLang_Struct_Type **) vs);
-}
-
-static int struct_push (unsigned char type, VOID_STAR ptr)
-{
- return push_struct_of_type (type, *(_SLang_Struct_Type **) ptr);
-}
-
-static _SLstruct_Field_Type *find_field (_SLang_Struct_Type *s, char *name)
-{
- _SLstruct_Field_Type *f, *fmax;
-
- f = s->fields;
- fmax = f + s->nfields;
-
- while (f < fmax)
- {
- /* Since both these are slstrings, only compare pointer */
- if (name == f->name)
- return f;
-
- f++;
- }
-
- return NULL;
-}
-
-static _SLstruct_Field_Type *pop_field (_SLang_Struct_Type *s, char *name)
-{
- _SLstruct_Field_Type *f;
-
- f = find_field (s, name);
- if (f == NULL)
- SLang_verror (SL_SYNTAX_ERROR, "struct has no field named %s", name);
- return f;
-}
-
-int SLstruct_create_struct (unsigned int nfields,
- char **field_names,
- unsigned char *field_types,
- VOID_STAR *field_values)
-{
- _SLang_Struct_Type *s;
- _SLstruct_Field_Type *f;
- unsigned int i;
-
- if (NULL == (s = allocate_struct (nfields)))
- return -1;
-
- f = s->fields;
- for (i = 0; i < nfields; i++)
- {
- unsigned char type;
- SLang_Class_Type *cl;
- VOID_STAR value;
- char *name = field_names [i];
-
- if (name == NULL)
- {
- SLang_verror (SL_INVALID_PARM, "A struct field name cannot be NULL");
- goto return_error;
- }
-
- if (NULL == (f->name = SLang_create_slstring (name)))
- goto return_error;
-
- if ((field_values == NULL)
- || (NULL == (value = field_values [i])))
- {
- f++;
- continue;
- }
-
- type = field_types[i];
- cl = _SLclass_get_class (type);
-
- if ((-1 == (cl->cl_push (type, value)))
- || (-1 == SLang_pop (&f->obj)))
- goto return_error;
-
- f++;
- }
-
- if (0 == _SLang_push_struct (s))
- return 0;
- /* drop */
-
- return_error:
- _SLstruct_delete_struct (s);
- return -1;
-}
-
-/* Interpreter interface */
-
-int _SLstruct_define_struct (void)
-{
- int nfields;
- _SLang_Struct_Type *s;
- _SLstruct_Field_Type *f;
-
- if (-1 == SLang_pop_integer (&nfields))
- return -1;
-
- if (nfields <= 0)
- {
- SLang_verror (SL_INVALID_PARM, "Number of struct fields must be > 0");
- return -1;
- }
-
- if (NULL == (s = allocate_struct (nfields)))
- return -1;
-
- f = s->fields;
- while (nfields)
- {
- char *name;
-
- nfields--;
- if (-1 == SLang_pop_slstring (&name))
- {
- _SLstruct_delete_struct (s);
- return -1;
- }
- f[nfields].name = name;
- }
-
- if (-1 == _SLang_push_struct (s))
- {
- _SLstruct_delete_struct (s);
- return -1;
- }
- return 0;
-}
-
-/* Simply make a struct that contains the same fields as struct s. Do not
- * duplicate the field values.
- */
-static _SLang_Struct_Type *make_struct_shell (_SLang_Struct_Type *s)
-{
- _SLang_Struct_Type *new_s;
- _SLstruct_Field_Type *new_f, *old_f;
- unsigned int i, nfields;
-
- nfields = s->nfields;
- if (NULL == (new_s = allocate_struct (nfields)))
- return NULL;
-
- new_f = new_s->fields;
- old_f = s->fields;
-
- for (i = 0; i < nfields; i++)
- {
- if (NULL == (new_f[i].name = SLang_create_slstring (old_f[i].name)))
- {
- _SLstruct_delete_struct (new_s);
- return NULL;
- }
- }
- return new_s;
-}
-
-static int struct_init_array_object (unsigned char type, VOID_STAR addr)
-{
- SLang_Class_Type *cl;
- _SLang_Struct_Type *s;
-
- cl = _SLclass_get_class (type);
- if (NULL == (s = make_struct_shell (cl->cl_struct_def)))
- return -1;
-
- s->num_refs = 1;
- *(_SLang_Struct_Type **) addr = s;
- return 0;
-}
-
-static int
-typedefed_struct_datatype_deref (unsigned char type)
-{
- SLang_Class_Type *cl;
- _SLang_Struct_Type *s;
-
- cl = _SLclass_get_class (type);
- if (NULL == (s = make_struct_shell (cl->cl_struct_def)))
- return -1;
-
- if (-1 == push_struct_of_type (type, s))
- {
- _SLstruct_delete_struct (s);
- return -1;
- }
-
- return 0;
-}
-
-static _SLang_Struct_Type *duplicate_struct (_SLang_Struct_Type *s)
-{
- _SLang_Struct_Type *new_s;
- _SLstruct_Field_Type *new_f, *f, *fmax;
-
- new_s = make_struct_shell (s);
-
- if (new_s == NULL)
- return NULL;
-
- f = s->fields;
- fmax = f + s->nfields;
- new_f = new_s->fields;
-
- while (f < fmax)
- {
- SLang_Object_Type *obj;
-
- obj = &f->obj;
- if (obj->data_type != SLANG_UNDEFINED_TYPE)
- {
- if ((-1 == _SLpush_slang_obj (obj))
- || (-1 == SLang_pop (&new_f->obj)))
- {
- _SLstruct_delete_struct (new_s);
- return NULL;
- }
- }
- new_f++;
- f++;
- }
-
- return new_s;
-}
-
-static int struct_dereference (unsigned char type, VOID_STAR addr)
-{
- _SLang_Struct_Type *s;
-
- if (NULL == (s = duplicate_struct (*(_SLang_Struct_Type **) addr)))
- return -1;
-
- if (-1 == push_struct_of_type (type, s))
- {
- _SLstruct_delete_struct (s);
- return -1;
- }
-
- return 0;
-}
-
-/*{{{ foreach */
-
-struct _SLang_Foreach_Context_Type
-{
- _SLang_Struct_Type *s;
- char *next_field_name;
-};
-
-static SLang_Foreach_Context_Type *
-struct_foreach_open (unsigned char type, unsigned int num)
-{
- SLang_Foreach_Context_Type *c;
- _SLang_Struct_Type *s;
- char *next_name;
-
- (void) type;
-
- if (-1 == _SLang_pop_struct (&s))
- return NULL;
-
- switch (num)
- {
- case 0:
- next_name = SLang_create_slstring ("next");
- break;
-
- case 1:
- if (-1 == SLang_pop_slstring (&next_name))
- next_name = NULL;
- break;
-
- default:
- next_name = NULL;
- SLang_verror (SL_NOT_IMPLEMENTED,
- "'foreach (Struct_Type) using' requires single control value");
- SLdo_pop_n (num);
- break;
- }
-
- if (next_name == NULL)
- {
- _SLstruct_delete_struct (s);
- return NULL;
- }
-
- c = (SLang_Foreach_Context_Type *)SLmalloc (sizeof (SLang_Foreach_Context_Type));
- if (c == NULL)
- {
- _SLstruct_delete_struct (s);
- SLang_free_slstring (next_name);
- return NULL;
- }
- memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
- c->next_field_name = next_name;
- c->s = s;
-
- return c;
-}
-
-static void struct_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- (void) type;
- if (c == NULL) return;
-
- SLang_free_slstring (c->next_field_name);
- if (c->s != NULL) _SLstruct_delete_struct (c->s);
- SLfree ((char *) c);
-}
-
-static int struct_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- _SLstruct_Field_Type *f;
- _SLang_Struct_Type *next_s;
-
- (void) type;
-
- if (c == NULL)
- return -1;
-
- if (c->s == NULL)
- return 0; /* done */
-
- if (-1 == _SLang_push_struct (c->s))
- return -1;
-
- /* Now get the next one ready for the next foreach loop */
-
- next_s = NULL;
- if (NULL != (f = find_field (c->s, c->next_field_name)))
- {
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (f->obj.data_type);
- /* Note that I cannot simply look for SLANG_STRUCT_TYPE since the
- * user may have typedefed another struct type. So, look at the
- * class methods.
- */
- if (cl->cl_foreach_open == struct_foreach_open)
- {
- next_s = f->obj.v.struct_val;
- next_s->num_refs += 1;
- }
- }
-
- _SLstruct_delete_struct (c->s);
- c->s = next_s;
-
- /* keep going */
- return 1;
-}
-
-/*}}}*/
-
-static int struct_sput (unsigned char type, char *name)
-{
- _SLang_Struct_Type *s;
- _SLstruct_Field_Type *f;
- SLang_Object_Type obj;
-
- (void) type;
-
- if (-1 == _SLang_pop_struct (&s))
- return -1;
-
- if ((NULL == (f = pop_field (s, name)))
- || (-1 == SLang_pop (&obj)))
- {
- _SLstruct_delete_struct (s);
- return -1;
- }
-
- SLang_free_object (&f->obj);
- f->obj = obj;
- _SLstruct_delete_struct (s);
- return 0;
-}
-
-static int struct_sget (unsigned char type, char *name)
-{
- _SLang_Struct_Type *s;
- _SLstruct_Field_Type *f;
- int ret;
-
- (void) type;
-
- if (-1 == _SLang_pop_struct (&s))
- return -1;
-
- if (NULL == (f = pop_field (s, name)))
- {
- _SLstruct_delete_struct (s);
- return -1;
- }
-
- ret = _SLpush_slang_obj (&f->obj);
- _SLstruct_delete_struct (s);
- return ret;
-}
-
-static int struct_typecast
- (unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp)
-{
- _SLang_Struct_Type **a, **b;
- unsigned int i;
-
- (void) a_type;
- (void) b_type;
-
- a = (_SLang_Struct_Type **) ap;
- b = (_SLang_Struct_Type **) bp;
- for (i = 0; i < na; i++)
- {
- b[i] = a[i];
- if (a[i] != NULL)
- a[i]->num_refs += 1;
- }
-
- return 1;
-}
-
-int _SLstruct_define_typedef (void)
-{
- char *type_name;
- _SLang_Struct_Type *s, *s1;
- SLang_Class_Type *cl;
-
- if (-1 == SLang_pop_slstring (&type_name))
- return -1;
-
- if (-1 == _SLang_pop_struct (&s))
- {
- SLang_free_slstring (type_name);
- return -1;
- }
-
- if (NULL == (s1 = make_struct_shell (s)))
- {
- SLang_free_slstring (type_name);
- _SLstruct_delete_struct (s);
- return -1;
- }
-
- _SLstruct_delete_struct (s);
-
- if (NULL == (cl = SLclass_allocate_class (type_name)))
- {
- SLang_free_slstring (type_name);
- _SLstruct_delete_struct (s1);
- return -1;
- }
- SLang_free_slstring (type_name);
-
- cl->cl_struct_def = s1;
- cl->cl_init_array_object = struct_init_array_object;
- cl->cl_datatype_deref = typedefed_struct_datatype_deref;
- cl->cl_destroy = struct_destroy;
- cl->cl_push = struct_push;
- cl->cl_dereference = struct_dereference;
- cl->cl_foreach_open = struct_foreach_open;
- cl->cl_foreach_close = struct_foreach_close;
- cl->cl_foreach = struct_foreach;
-
- cl->cl_sget = struct_sget;
- cl->cl_sput = struct_sput;
-
- if (-1 == SLclass_register_class (cl,
- SLANG_VOID_TYPE, /* any open slot */
- sizeof (_SLang_Struct_Type),
- SLANG_CLASS_TYPE_PTR))
- {
- /* FIXME: Priority=low */
- /* There is a memory leak here if this fails... */
- return -1;
- }
- /* Note: typecast from a user type struct type allowed but not the other
- * way.
- */
- if (-1 == SLclass_add_typecast (cl->cl_data_type, SLANG_STRUCT_TYPE, struct_typecast, 1))
- return -1;
-
- return 0;
-}
-
-static int
-struct_datatype_deref (unsigned char stype)
-{
- (void) stype;
-
- if (SLang_peek_at_stack () == SLANG_ARRAY_TYPE)
- {
- SLang_Array_Type *at;
- int status;
-
- if (-1 == SLang_pop_array_of_type (&at, SLANG_STRING_TYPE))
- return -1;
-
- status = SLstruct_create_struct (at->num_elements,
- (char **) at->data, NULL, NULL);
-
- SLang_free_array (at);
- return status;
- }
-
- SLang_push_integer (SLang_Num_Function_Args);
- return _SLstruct_define_struct ();
-}
-
-static int register_struct (void)
-{
- SLang_Class_Type *cl;
-
- if (NULL == (cl = SLclass_allocate_class ("Struct_Type")))
- return -1;
-
- (void) SLclass_set_destroy_function (cl, struct_destroy);
- (void) SLclass_set_push_function (cl, struct_push);
- cl->cl_dereference = struct_dereference;
- cl->cl_datatype_deref = struct_datatype_deref;
-
- cl->cl_foreach_open = struct_foreach_open;
- cl->cl_foreach_close = struct_foreach_close;
- cl->cl_foreach = struct_foreach;
-
- cl->cl_sget = struct_sget;
- cl->cl_sput = struct_sput;
-
- if (-1 == SLclass_register_class (cl, SLANG_STRUCT_TYPE, sizeof (_SLang_Struct_Type),
- SLANG_CLASS_TYPE_PTR))
- return -1;
-
- return 0;
-}
-
-static void get_struct_field_names (_SLang_Struct_Type *s)
-{
- SLang_Array_Type *a;
- char **data;
- int i, nfields;
- _SLstruct_Field_Type *f;
-
- nfields = (int) s->nfields;
-
- if (NULL == (a = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &nfields, 1)))
- return;
-
- f = s->fields;
- data = (char **) a->data;
- for (i = 0; i < nfields; i++)
- {
- /* Since we are dealing with hashed strings, the next call should not
- * fail. If it does, the interpreter will handle it at some other
- * level.
- */
- data [i] = SLang_create_slstring (f[i].name);
- }
-
- SLang_push_array (a, 1);
-}
-
-static int push_struct_fields (_SLang_Struct_Type *s)
-{
- _SLstruct_Field_Type *f, *fmax;
- int num;
-
- f = s->fields;
- fmax = f + s->nfields;
-
- num = 0;
- while (fmax > f)
- {
- fmax--;
- if (-1 == _SLpush_slang_obj (&fmax->obj))
- break;
-
- num++;
- }
-
- return num;
-}
-
-/* Syntax: set_struct_field (s, name, value); */
-static void struct_set_field (void)
-{
- _SLang_Struct_Type *s;
- _SLstruct_Field_Type *f;
- SLang_Object_Type obj;
- char *name;
-
- if (-1 == SLang_pop (&obj))
- return;
-
- if (-1 == SLang_pop_slstring (&name))
- {
- SLang_free_object (&obj);
- return;
- }
-
- if (-1 == _SLang_pop_struct (&s))
- {
- SLang_free_slstring (name);
- SLang_free_object (&obj);
- return;
- }
-
- if (NULL == (f = pop_field (s, name)))
- {
- _SLstruct_delete_struct (s);
- SLang_free_slstring (name);
- SLang_free_object (&obj);
- return;
- }
-
- SLang_free_object (&f->obj);
- f->obj = obj;
-
- _SLstruct_delete_struct (s);
- SLang_free_slstring (name);
-}
-
-/* Syntax: set_struct_fields (s, values....); */
-static void set_struct_fields (void)
-{
- unsigned int n;
- _SLang_Struct_Type *s;
- _SLstruct_Field_Type *f;
-
- n = (unsigned int) SLang_Num_Function_Args;
-
- if (-1 == SLreverse_stack (n))
- return;
-
- n--;
- if (-1 == _SLang_pop_struct (&s))
- {
- SLdo_pop_n (n);
- return;
- }
-
- if (n > s->nfields)
- {
- SLdo_pop_n (n);
- SLang_verror (SL_INVALID_PARM, "Too many values for structure");
- _SLstruct_delete_struct (s);
- return;
- }
-
- f = s->fields;
- while (n > 0)
- {
- SLang_Object_Type obj;
-
- if (-1 == SLang_pop (&obj))
- break;
-
- SLang_free_object (&f->obj);
- f->obj = obj;
-
- f++;
- n--;
- }
-
- _SLstruct_delete_struct (s);
-}
-
-static void get_struct_field (char *name)
-{
- (void) struct_sget (0, name);
-}
-
-static int is_struct_type (void)
-{
- SLang_Object_Type obj;
- unsigned char type;
- int status;
-
- if (-1 == SLang_pop (&obj))
- return -1;
-
- type = obj.data_type;
- if (type == SLANG_STRUCT_TYPE)
- status = 1;
- else
- status = (NULL != _SLclass_get_class (type)->cl_struct_def);
- SLang_free_object (&obj);
- return status;
-}
-
-
-static SLang_Intrin_Fun_Type Struct_Table [] =
-{
- MAKE_INTRINSIC_1("get_struct_field_names", get_struct_field_names, SLANG_VOID_TYPE, SLANG_STRUCT_TYPE),
- MAKE_INTRINSIC_1("get_struct_field", get_struct_field, SLANG_VOID_TYPE, SLANG_STRING_TYPE),
- MAKE_INTRINSIC_1("_push_struct_field_values", push_struct_fields, SLANG_INT_TYPE, SLANG_STRUCT_TYPE),
- MAKE_INTRINSIC_0("set_struct_field", struct_set_field, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("set_struct_fields", set_struct_fields, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("is_struct_type", is_struct_type, SLANG_INT_TYPE),
- /* MAKE_INTRINSIC_I("_create_struct", create_struct, SLANG_VOID_TYPE), */
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-int _SLstruct_init (void)
-{
- if ((-1 == SLadd_intrin_fun_table (Struct_Table, NULL))
- || (-1 == register_struct ()))
- return -1;
-
- return 0;
-}
-
-void _SLstruct_pop_args (int *np)
-{
- SLang_Array_Type *at;
- int i, n;
- _SLang_Struct_Type **data;
-
- n = *np;
-
- if (n < 0)
- {
- SLang_Error = SL_INVALID_PARM;
- return;
- }
-
- data = (_SLang_Struct_Type **) SLmalloc ((n + 1) * sizeof (_SLang_Struct_Type *));
- if (data == NULL)
- {
- SLdo_pop_n (n);
- return;
- }
-
- memset ((char *)data, 0, n * sizeof (_SLang_Struct_Type *));
-
- i = n;
- while (i > 0)
- {
- _SLang_Struct_Type *s;
- _SLstruct_Field_Type *f;
-
- i--;
-
- if (NULL == (s = allocate_struct (1)))
- goto return_error;
-
- data[i] = s;
- s->num_refs += 1; /* keeping a copy */
-
- f = s->fields;
- if (NULL == (f->name = SLang_create_slstring ("value")))
- goto return_error;
-
- if (-1 == SLang_pop (&f->obj))
- goto return_error;
- }
-
- if (NULL == (at = SLang_create_array (SLANG_STRUCT_TYPE, 0,
- (VOID_STAR) data, &n, 1)))
- goto return_error;
-
- (void) SLang_push_array (at, 1);
- return;
-
- return_error:
- for (i = 0; i < n; i++)
- {
- _SLang_Struct_Type *s;
-
- s = data[i];
- if (s != NULL)
- _SLstruct_delete_struct (s);
- }
-
- SLfree ((char *) data);
-}
-
-void _SLstruct_push_args (SLang_Array_Type *at)
-{
- _SLang_Struct_Type **sp;
- unsigned int num;
-
- if (at->data_type != SLANG_STRUCT_TYPE)
- {
- SLang_Error = SL_TYPE_MISMATCH;
- return;
- }
-
- sp = (_SLang_Struct_Type **) at->data;
- num = at->num_elements;
-
- while ((SLang_Error == 0) && (num > 0))
- {
- _SLang_Struct_Type *s;
-
- num--;
- if (NULL == (s = *sp++))
- {
- SLang_push_null ();
- continue;
- }
-
- /* I should check to see if the value field is present, but... */
- (void) _SLpush_slang_obj (&s->fields->obj);
- }
-}
diff --git a/mdk-stage1/slang/sltermin.c b/mdk-stage1/slang/sltermin.c
deleted file mode 100644
index f9c64f0b2..000000000
--- a/mdk-stage1/slang/sltermin.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/* This file contains enough terminfo reading capabilities sufficient for
- * the slang SLtt interface.
- */
-
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/*
- * The majority of the comments found in the file were taken from the
- * term(4) man page on an SGI.
- */
-
-/* Short integers are stored in two 8-bit bytes. The first byte contains
- * the least significant 8 bits of the value, and the second byte contains
- * the most significant 8 bits. (Thus, the value represented is
- * 256*second+first.) The value -1 is represented by 0377,0377, and the
- * value -2 is represented by 0376,0377; other negative values are illegal.
- * The -1 generally means that a capability is missing from this terminal.
- * The -2 means that the capability has been cancelled in the terminfo
- * source and also is to be considered missing.
- */
-
-static int make_integer (unsigned char *buf)
-{
- register int lo, hi;
- lo = (int) *buf++; hi = (int) *buf;
- if (hi == 0377)
- {
- if (lo == 0377) return -1;
- if (lo == 0376) return -2;
- }
- return lo + 256 * hi;
-}
-
-/*
- * The compiled file is created from the source file descriptions of the
- * terminals (see the -I option of infocmp) by using the terminfo compiler,
- * tic, and read by the routine setupterm [see curses(3X).] The file is
- * divided into six parts in the following order: the header, terminal
- * names, boolean flags, numbers, strings, and string table.
- *
- * The header section begins the file. This section contains six short
- * integers in the format described below. These integers are (1) the magic
- * number (octal 0432); (2) the size, in bytes, of the names section; (3)
- * the number of bytes in the boolean section; (4) the number of short
- * integers in the numbers section; (5) the number of offsets (short
- * integers) in the strings section; (6) the size, in bytes, of the string
- * table.
- */
-
-#define MAGIC 0432
-
-/* In this structure, all char * fields are malloced EXCEPT if the
- * structure is SLTERMCAP. In that case, only terminal_names is malloced
- * and the other fields are pointers into it.
- */
-struct _SLterminfo_Type
-{
-#define SLTERMINFO 1
-#define SLTERMCAP 2
- unsigned int flags;
-
- unsigned int name_section_size;
- char *terminal_names;
-
- unsigned int boolean_section_size;
- unsigned char *boolean_flags;
-
- unsigned int num_numbers;
- unsigned char *numbers;
-
- unsigned int num_string_offsets;
- unsigned char *string_offsets;
-
- unsigned int string_table_size;
- char *string_table;
-
-};
-
-static char *tcap_getstr (char *, SLterminfo_Type *);
-static int tcap_getnum (char *, SLterminfo_Type *);
-static int tcap_getflag (char *, SLterminfo_Type *);
-static int tcap_getent (char *, SLterminfo_Type *);
-
-static FILE *open_terminfo (char *file, SLterminfo_Type *h)
-{
- FILE *fp;
- unsigned char buf[12];
-
- /* Alan Cox reported a security problem here if the application using the
- * library is setuid. So, I need to make sure open the file as a normal
- * user. Unfortunately, there does not appear to be a portable way of
- * doing this, so I am going to use 'setfsgid' and 'setfsuid', which
- * are not portable.
- *
- * I will also look into the use of setreuid, seteuid and setregid, setegid.
- * FIXME: Priority=medium
- */
- fp = fopen (file, "rb");
- if (fp == NULL) return NULL;
-
- if ((12 == fread ((char *) buf, 1, 12, fp) && (MAGIC == make_integer (buf))))
- {
- h->name_section_size = make_integer (buf + 2);
- h->boolean_section_size = make_integer (buf + 4);
- h->num_numbers = make_integer (buf + 6);
- h->num_string_offsets = make_integer (buf + 8);
- h->string_table_size = make_integer (buf + 10);
- }
- else
- {
- fclose (fp);
- fp = NULL;
- }
- return fp;
-}
-
-/*
- * The terminal names section comes next. It contains the first line of the
- * terminfo description, listing the various names for the terminal,
- * separated by the bar ( | ) character (see term(5)). The section is
- * terminated with an ASCII NUL character.
- */
-
-/* returns pointer to malloced space */
-static unsigned char *read_terminfo_section (FILE *fp, unsigned int size)
-{
- char *s;
-
- if (NULL == (s = (char *) SLmalloc (size))) return NULL;
- if (size != fread (s, 1, size, fp))
- {
- SLfree (s);
- return NULL;
- }
- return (unsigned char *) s;
-}
-
-static char *read_terminal_names (FILE *fp, SLterminfo_Type *t)
-{
- return t->terminal_names = (char *) read_terminfo_section (fp, t->name_section_size);
-}
-
-/*
- * The boolean flags have one byte for each flag. This byte is either 0 or
- * 1 as the flag is present or absent. The value of 2 means that the flag
- * has been cancelled. The capabilities are in the same order as the file
- * <term.h>.
- */
-
-static unsigned char *read_boolean_flags (FILE *fp, SLterminfo_Type *t)
-{
- /* Between the boolean section and the number section, a null byte is
- * inserted, if necessary, to ensure that the number section begins on an
- * even byte offset. All short integers are aligned on a short word
- * boundary.
- */
-
- unsigned int size = (t->name_section_size + t->boolean_section_size) % 2;
- size += t->boolean_section_size;
-
- return t->boolean_flags = read_terminfo_section (fp, size);
-}
-
-/*
- * The numbers section is similar to the boolean flags section. Each
- * capability takes up two bytes, and is stored as a short integer. If the
- * value represented is -1 or -2, the capability is taken to be missing.
- */
-
-static unsigned char *read_numbers (FILE *fp, SLterminfo_Type *t)
-{
- return t->numbers = read_terminfo_section (fp, 2 * t->num_numbers);
-}
-
-/* The strings section is also similar. Each capability is stored as a
- * short integer, in the format above. A value of -1 or -2 means the
- * capability is missing. Otherwise, the value is taken as an offset from
- * the beginning of the string table. Special characters in ^X or \c
- * notation are stored in their interpreted form, not the printing
- * representation. Padding information ($<nn>) and parameter information
- * (%x) are stored intact in uninterpreted form.
- */
-
-static unsigned char *read_string_offsets (FILE *fp, SLterminfo_Type *t)
-{
- return t->string_offsets = (unsigned char *) read_terminfo_section (fp, 2 * t->num_string_offsets);
-}
-
-/* The final section is the string table. It contains all the values of
- * string capabilities referenced in the string section. Each string is
- * null terminated.
- */
-
-static char *read_string_table (FILE *fp, SLterminfo_Type *t)
-{
- return t->string_table = (char *) read_terminfo_section (fp, t->string_table_size);
-}
-
-/*
- * Compiled terminfo(4) descriptions are placed under the directory
- * /usr/share/lib/terminfo. In order to avoid a linear search of a huge
- * UNIX system directory, a two-level scheme is used:
- * /usr/share/lib/terminfo/c/name where name is the name of the terminal,
- * and c is the first character of name. Thus, att4425 can be found in the
- * file /usr/share/lib/terminfo/a/att4425. Synonyms for the same terminal
- * are implemented by multiple links to the same compiled file.
- */
-
-#define MAX_TI_DIRS 7
-static char *Terminfo_Dirs [MAX_TI_DIRS] =
-{
- NULL, /* $HOME/.terminfo */
- NULL, /* $TERMINFO */
- "/usr/share/terminfo",
- "/usr/lib/terminfo",
- "/usr/share/lib/terminfo",
- "/etc/terminfo",
- "/usr/local/lib/terminfo"
-};
-
-SLterminfo_Type *_SLtt_tigetent (char *term)
-{
- char *tidir;
- int i;
- FILE *fp = NULL;
- char file[1024];
- static char home_ti [1024];
- char *home;
- SLterminfo_Type *ti;
-
- if (
- (term == NULL)
-#ifdef SLANG_UNTIC
- && (SLang_Untic_Terminfo_File == NULL)
-#endif
- )
- return NULL;
-
- if (NULL == (ti = (SLterminfo_Type *) SLmalloc (sizeof (SLterminfo_Type))))
- {
- return NULL;
- }
-
-#ifdef SLANG_UNTIC
- if (SLang_Untic_Terminfo_File != NULL)
- {
- fp = open_terminfo (SLang_Untic_Terminfo_File, ti);
- goto fp_open_label;
- }
- else
-#endif
- /* If we are on a termcap based system, use termcap */
- if (0 == tcap_getent (term, ti)) return ti;
-
- if (NULL != (home = getenv ("HOME")))
- {
- strncpy (home_ti, home, sizeof (home_ti) - 11);
- home_ti [sizeof(home_ti) - 11] = 0;
- strcat (home_ti, "/.terminfo");
- Terminfo_Dirs [0] = home_ti;
- }
-
- Terminfo_Dirs[1] = getenv ("TERMINFO");
- i = 0;
- while (i < MAX_TI_DIRS)
- {
- tidir = Terminfo_Dirs[i];
- if ((tidir != NULL)
- && (sizeof (file) > strlen (tidir) + 2 + strlen (term)))
- {
- sprintf (file, "%s/%c/%s", tidir, *term, term);
- if (NULL != (fp = open_terminfo (file, ti)))
- break;
- }
- i++;
- }
-#ifdef SLANG_UNTIC
- fp_open_label:
-#endif
-
- if (fp != NULL)
- {
- if (NULL != read_terminal_names (fp, ti))
- {
- if (NULL != read_boolean_flags (fp, ti))
- {
- if (NULL != read_numbers (fp, ti))
- {
- if (NULL != read_string_offsets (fp, ti))
- {
- if (NULL != read_string_table (fp, ti))
- {
- /* success */
- fclose (fp);
- ti->flags = SLTERMINFO;
- return ti;
- }
- SLfree ((char *)ti->string_offsets);
- }
- SLfree ((char *)ti->numbers);
- }
- SLfree ((char *)ti->boolean_flags);
- }
- SLfree ((char *)ti->terminal_names);
- }
- fclose (fp);
- }
-
- SLfree ((char *)ti);
- return NULL;
-}
-
-#ifdef SLANG_UNTIC
-# define UNTIC_COMMENT(x) ,x
-#else
-# define UNTIC_COMMENT(x)
-#endif
-
-typedef struct
-{
- char name[3];
- int offset;
-#ifdef SLANG_UNTIC
- char *comment;
-#endif
-}
-Tgetstr_Map_Type;
-
-/* I need to add: K1-5, %0-5(not important), @8, &8... */
-static Tgetstr_Map_Type Tgetstr_Map [] =
-{
- {"!1", 212 UNTIC_COMMENT("shifted key")},
- {"!2", 213 UNTIC_COMMENT("shifted key")},
- {"!3", 214 UNTIC_COMMENT("shifted key")},
- {"#1", 198 UNTIC_COMMENT("shifted key")},
- {"#2", 199 UNTIC_COMMENT("Key S-Home")},
- {"#3", 200 UNTIC_COMMENT("Key S-Insert")},
- {"#4", 201 UNTIC_COMMENT("Key S-Left")},
- {"%0", 177 UNTIC_COMMENT("redo key")},
- {"%1", 168 UNTIC_COMMENT("help key")},
- {"%2", 169 UNTIC_COMMENT("mark key")},
- {"%3", 170 UNTIC_COMMENT("message key")},
- {"%4", 171 UNTIC_COMMENT("move key")},
- {"%5", 172 UNTIC_COMMENT("next key")},
- {"%6", 173 UNTIC_COMMENT("open key")},
- {"%7", 174 UNTIC_COMMENT("options key")},
- {"%8", 175 UNTIC_COMMENT("previous key")},
- {"%9", 176 UNTIC_COMMENT("print key")},
- {"%a", 202 UNTIC_COMMENT("shifted key")},
- {"%b", 203 UNTIC_COMMENT("shifted key")},
- {"%c", 204 UNTIC_COMMENT("Key S-Next")},
- {"%d", 205 UNTIC_COMMENT("shifted key")},
- {"%e", 206 UNTIC_COMMENT("Key S-Previous")},
- {"%f", 207 UNTIC_COMMENT("shifted key")},
- {"%g", 208 UNTIC_COMMENT("shifted key")},
- {"%h", 209 UNTIC_COMMENT("shifted key")},
- {"%i", 210 UNTIC_COMMENT("Key S-Right")},
- {"%j", 211 UNTIC_COMMENT("shifted key")},
- {"&0", 187 UNTIC_COMMENT("shifted key")},
- {"&1", 178 UNTIC_COMMENT("reference key")},
- {"&2", 179 UNTIC_COMMENT("refresh key")},
- {"&3", 180 UNTIC_COMMENT("replace key")},
- {"&4", 181 UNTIC_COMMENT("restart key")},
- {"&5", 182 UNTIC_COMMENT("resume key")},
- {"&6", 183 UNTIC_COMMENT("save key")},
- {"&7", 184 UNTIC_COMMENT("suspend key")},
- {"&8", 185 UNTIC_COMMENT("undo key")},
- {"&9", 186 UNTIC_COMMENT("shifted key")},
- {"*0", 197 UNTIC_COMMENT("shifted key")},
- {"*1", 188 UNTIC_COMMENT("shifted key")},
- {"*2", 189 UNTIC_COMMENT("shifted key")},
- {"*3", 190 UNTIC_COMMENT("shifted key")},
- {"*4", 191 UNTIC_COMMENT("Key S-Delete")},
- {"*5", 192 UNTIC_COMMENT("shifted key")},
- {"*6", 193 UNTIC_COMMENT("select key")},
- {"*7", 194 UNTIC_COMMENT("Key S-End")},
- {"*8", 195 UNTIC_COMMENT("shifted key")},
- {"*9", 196 UNTIC_COMMENT("shifted key")},
- {"@0", 167 UNTIC_COMMENT("find key")},
- {"@1", 158 UNTIC_COMMENT("begin key")},
- {"@2", 159 UNTIC_COMMENT("cancel key")},
- {"@3", 160 UNTIC_COMMENT("close key")},
- {"@4", 161 UNTIC_COMMENT("command key")},
- {"@5", 162 UNTIC_COMMENT("copy key")},
- {"@6", 163 UNTIC_COMMENT("create key")},
- {"@7", 164 UNTIC_COMMENT("Key End")},
- {"@8", 165 UNTIC_COMMENT("enter/send key")},
- {"@9", 166 UNTIC_COMMENT("exit key")},
- {"AB", 360 UNTIC_COMMENT("set ANSI color background")},
- {"AF", 359 UNTIC_COMMENT("set ANSI color foreground")},
- {"AL", 110 UNTIC_COMMENT("parm_insert_line")},
- {"CC", 9 UNTIC_COMMENT("terminal settable cmd character in prototype !?")},
- {"CM", 15 UNTIC_COMMENT("memory relative cursor addressing")},
- {"CW", 277 UNTIC_COMMENT("define a window #1 from #2, #3 to #4, #5")},
- {"DC", 105 UNTIC_COMMENT("delete #1 chars")},
- {"DI", 280 UNTIC_COMMENT("dial number #1")},
- {"DK", 275 UNTIC_COMMENT("display clock at (#1,#2)")},
- {"DL", 106 UNTIC_COMMENT("parm_delete_line")},
- {"DO", 107 UNTIC_COMMENT("down #1 lines")},
- {"F1", 216 UNTIC_COMMENT("key_f11")},
- {"F2", 217 UNTIC_COMMENT("key_f12")},
- {"F3", 218 UNTIC_COMMENT("key_f13")},
- {"F4", 219 UNTIC_COMMENT("key_f14")},
- {"F5", 220 UNTIC_COMMENT("key_f15")},
- {"F6", 221 UNTIC_COMMENT("key_f16")},
- {"F7", 222 UNTIC_COMMENT("key_f17")},
- {"F8", 223 UNTIC_COMMENT("key_f18")},
- {"F9", 224 UNTIC_COMMENT("key_f19")},
- {"FA", 225 UNTIC_COMMENT("key_f20")},
- {"FB", 226 UNTIC_COMMENT("F21 function key")},
- {"FC", 227 UNTIC_COMMENT("F22 function key")},
- {"FD", 228 UNTIC_COMMENT("F23 function key")},
- {"FE", 229 UNTIC_COMMENT("F24 function key")},
- {"FF", 230 UNTIC_COMMENT("F25 function key")},
- {"FG", 231 UNTIC_COMMENT("F26 function key")},
- {"FH", 232 UNTIC_COMMENT("F27 function key")},
- {"FI", 233 UNTIC_COMMENT("F28 function key")},
- {"FJ", 234 UNTIC_COMMENT("F29 function key")},
- {"FK", 235 UNTIC_COMMENT("F30 function key")},
- {"FL", 236 UNTIC_COMMENT("F31 function key")},
- {"FM", 237 UNTIC_COMMENT("F32 function key")},
- {"FN", 238 UNTIC_COMMENT("F33 function key")},
- {"FO", 239 UNTIC_COMMENT("F34 function key")},
- {"FP", 240 UNTIC_COMMENT("F35 function key")},
- {"FQ", 241 UNTIC_COMMENT("F36 function key")},
- {"FR", 242 UNTIC_COMMENT("F37 function key")},
- {"FS", 243 UNTIC_COMMENT("F38 function key")},
- {"FT", 244 UNTIC_COMMENT("F39 function key")},
- {"FU", 245 UNTIC_COMMENT("F40 function key")},
- {"FV", 246 UNTIC_COMMENT("F41 function key")},
- {"FW", 247 UNTIC_COMMENT("F42 function key")},
- {"FX", 248 UNTIC_COMMENT("F43 function key")},
- {"FY", 249 UNTIC_COMMENT("F44 function key")},
- {"FZ", 250 UNTIC_COMMENT("F45 function key")},
- {"Fa", 251 UNTIC_COMMENT("F46 function key")},
- {"Fb", 252 UNTIC_COMMENT("F47 function key")},
- {"Fc", 253 UNTIC_COMMENT("F48 function key")},
- {"Fd", 254 UNTIC_COMMENT("F49 function key")},
- {"Fe", 255 UNTIC_COMMENT("F50 function key")},
- {"Ff", 256 UNTIC_COMMENT("F51 function key")},
- {"Fg", 257 UNTIC_COMMENT("F52 function key")},
- {"Fh", 258 UNTIC_COMMENT("F53 function key")},
- {"Fi", 259 UNTIC_COMMENT("F54 function key")},
- {"Fj", 260 UNTIC_COMMENT("F55 function key")},
- {"Fk", 261 UNTIC_COMMENT("F56 function key")},
- {"Fl", 262 UNTIC_COMMENT("F57 function key")},
- {"Fm", 263 UNTIC_COMMENT("F58 function key")},
- {"Fn", 264 UNTIC_COMMENT("F59 function key")},
- {"Fo", 265 UNTIC_COMMENT("F60 function key")},
- {"Fp", 266 UNTIC_COMMENT("F61 function key")},
- {"Fq", 267 UNTIC_COMMENT("F62 function key")},
- {"Fr", 268 UNTIC_COMMENT("F63 function key")},
- {"G1", 400 UNTIC_COMMENT("single upper right")},
- {"G2", 398 UNTIC_COMMENT("single upper left")},
- {"G3", 399 UNTIC_COMMENT("single lower left")},
- {"G4", 401 UNTIC_COMMENT("single lower right")},
- {"GC", 408 UNTIC_COMMENT("single intersection")},
- {"GD", 405 UNTIC_COMMENT("tee pointing down")},
- {"GH", 406 UNTIC_COMMENT("single horizontal line")},
- {"GL", 403 UNTIC_COMMENT("tee pointing left")},
- {"GR", 402 UNTIC_COMMENT("tee pointing right")},
- {"GU", 404 UNTIC_COMMENT("tee pointing up")},
- {"GV", 407 UNTIC_COMMENT("single vertical line")},
- {"Gm", 358 UNTIC_COMMENT("Curses should get button events")},
- {"HU", 279 UNTIC_COMMENT("hang-up phone")},
- {"IC", 108 UNTIC_COMMENT("insert #1 chars")},
- {"Ic", 299 UNTIC_COMMENT("initialize color #1 to (#2,#3,#4)")},
- {"Ip", 300 UNTIC_COMMENT("Initialize color pair #1 to fg=(#2,#3,#4), bg=(#5,#6,#7)")},
- {"K1", 139 UNTIC_COMMENT("upper left of keypad")},
- {"K2", 141 UNTIC_COMMENT("center of keypad")},
- {"K3", 140 UNTIC_COMMENT("upper right of keypad")},
- {"K4", 142 UNTIC_COMMENT("lower left of keypad")},
- {"K5", 143 UNTIC_COMMENT("lower right of keypad")},
- {"Km", 355 UNTIC_COMMENT("Mouse event has occurred")},
- {"LE", 111 UNTIC_COMMENT("move #1 chars to the left")},
- {"LF", 157 UNTIC_COMMENT("turn off soft labels")},
- {"LO", 156 UNTIC_COMMENT("turn on soft labels")},
- {"Lf", 273 UNTIC_COMMENT("label format")},
- {"MC", 270 UNTIC_COMMENT("clear right and left soft margins")},
- {"ML", 271 UNTIC_COMMENT("set left soft margin")},
- {"ML", 368 UNTIC_COMMENT("Set both left and right margins to #1, #2")},
- {"MR", 272 UNTIC_COMMENT("set right soft margin")},
- {"MT", 369 UNTIC_COMMENT("Sets both top and bottom margins to #1, #2")},
- {"Mi", 356 UNTIC_COMMENT("Mouse status information")},
- {"PA", 285 UNTIC_COMMENT("pause for 2-3 seconds")},
- {"PU", 283 UNTIC_COMMENT("select pulse dialling")},
- {"QD", 281 UNTIC_COMMENT("dial number #1 without checking")},
- {"RA", 152 UNTIC_COMMENT("turn off automatic margins")},
- {"RC", 276 UNTIC_COMMENT("remove clock")},
- {"RF", 215 UNTIC_COMMENT("send next input char (for ptys)")},
- {"RI", 112 UNTIC_COMMENT("parm_right_cursor")},
- {"RQ", 357 UNTIC_COMMENT("Request mouse position")},
- {"RX", 150 UNTIC_COMMENT("turn off xon/xoff handshaking")},
- {"S1", 378 UNTIC_COMMENT("Display PC character")},
- {"S2", 379 UNTIC_COMMENT("Enter PC character display mode")},
- {"S3", 380 UNTIC_COMMENT("Exit PC character display mode")},
- {"S4", 381 UNTIC_COMMENT("Enter PC scancode mode")},
- {"S5", 382 UNTIC_COMMENT("Exit PC scancode mode")},
- {"S6", 383 UNTIC_COMMENT("PC terminal options")},
- {"S7", 384 UNTIC_COMMENT("Escape for scancode emulation")},
- {"S8", 385 UNTIC_COMMENT("Alternate escape for scancode emulation")},
- {"SA", 151 UNTIC_COMMENT("turn on automatic margins")},
- {"SC", 274 UNTIC_COMMENT("set clock, #1 hrs #2 mins #3 secs")},
- {"SF", 109 UNTIC_COMMENT("scroll forward #1 lines")},
- {"SR", 113 UNTIC_COMMENT("scroll back #1 lines")},
- {"SX", 149 UNTIC_COMMENT("turn on xon/xoff handshaking")},
- {"Sb", 303 UNTIC_COMMENT("set background (color)")},
- {"Sf", 302 UNTIC_COMMENT("set foreground (color)")},
- {"TO", 282 UNTIC_COMMENT("select touch tone dialing")},
- {"UP", 114 UNTIC_COMMENT("up #1 lines")},
- {"WA", 286 UNTIC_COMMENT("wait for dial-tone")},
- {"WG", 278 UNTIC_COMMENT("go to window #1")},
- {"XF", 154 UNTIC_COMMENT("XOFF character")},
- {"XN", 153 UNTIC_COMMENT("XON character")},
- {"Xh", 386 UNTIC_COMMENT("Enter horizontal highlight mode")},
- {"Xl", 387 UNTIC_COMMENT("Enter left highlight mode")},
- {"Xo", 388 UNTIC_COMMENT("Enter low highlight mode")},
- {"Xr", 389 UNTIC_COMMENT("Enter right highlight mode")},
- {"Xt", 390 UNTIC_COMMENT("Enter top highlight mode")},
- {"Xv", 391 UNTIC_COMMENT("Enter vertical highlight mode")},
- {"Xy", 370 UNTIC_COMMENT("Repeat bit image cell #1 #2 times")},
- {"YZ", 377 UNTIC_COMMENT("Set page length to #1 lines")},
- {"Yv", 372 UNTIC_COMMENT("Move to beginning of same row")},
- {"Yw", 373 UNTIC_COMMENT("Give name for color #1")},
- {"Yx", 374 UNTIC_COMMENT("Define rectangualar bit image region")},
- {"Yy", 375 UNTIC_COMMENT("End a bit-image region")},
- {"Yz", 376 UNTIC_COMMENT("Change to ribbon color #1")},
- {"ZA", 304 UNTIC_COMMENT("Change number of characters per inch")},
- {"ZB", 305 UNTIC_COMMENT("Change number of lines per inch")},
- {"ZC", 306 UNTIC_COMMENT("Change horizontal resolution")},
- {"ZD", 307 UNTIC_COMMENT("Change vertical resolution")},
- {"ZE", 308 UNTIC_COMMENT("Define a character")},
- {"ZF", 309 UNTIC_COMMENT("Enter double-wide mode")},
- {"ZG", 310 UNTIC_COMMENT("Enter draft-quality mode")},
- {"ZH", 311 UNTIC_COMMENT("Enter italic mode")},
- {"ZI", 312 UNTIC_COMMENT("Start leftward carriage motion")},
- {"ZJ", 313 UNTIC_COMMENT("Start micro-motion mode")},
- {"ZK", 314 UNTIC_COMMENT("Enter NLQ mode")},
- {"ZL", 315 UNTIC_COMMENT("Wnter normal-quality mode")},
- {"ZM", 316 UNTIC_COMMENT("Enter shadow-print mode")},
- {"ZN", 317 UNTIC_COMMENT("Enter subscript mode")},
- {"ZO", 318 UNTIC_COMMENT("Enter superscript mode")},
- {"ZP", 319 UNTIC_COMMENT("Start upward carriage motion")},
- {"ZQ", 320 UNTIC_COMMENT("End double-wide mode")},
- {"ZR", 321 UNTIC_COMMENT("End italic mode")},
- {"ZS", 322 UNTIC_COMMENT("End left-motion mode")},
- {"ZT", 323 UNTIC_COMMENT("End micro-motion mode")},
- {"ZU", 324 UNTIC_COMMENT("End shadow-print mode")},
- {"ZV", 325 UNTIC_COMMENT("End subscript mode")},
- {"ZW", 326 UNTIC_COMMENT("End superscript mode")},
- {"ZX", 327 UNTIC_COMMENT("End reverse character motion")},
- {"ZY", 328 UNTIC_COMMENT("Like column_address in micro mode")},
- {"ZZ", 329 UNTIC_COMMENT("Like cursor_down in micro mode")},
- {"Za", 330 UNTIC_COMMENT("Like cursor_left in micro mode")},
- {"Zb", 331 UNTIC_COMMENT("Like cursor_right in micro mode")},
- {"Zc", 332 UNTIC_COMMENT("Like row_address in micro mode")},
- {"Zd", 333 UNTIC_COMMENT("Like cursor_up in micro mode")},
- {"Ze", 334 UNTIC_COMMENT("Match software bits to print-head pins")},
- {"Zf", 335 UNTIC_COMMENT("Like parm_down_cursor in micro mode")},
- {"Zg", 336 UNTIC_COMMENT("Like parm_left_cursor in micro mode")},
- {"Zh", 337 UNTIC_COMMENT("Like parm_right_cursor in micro mode")},
- {"Zi", 338 UNTIC_COMMENT("Like parm_up_cursor in micro mode")},
- {"Zj", 339 UNTIC_COMMENT("Select character set")},
- {"Zk", 340 UNTIC_COMMENT("Set bottom margin at current line")},
- {"Zl", 341 UNTIC_COMMENT("Set bottom margin at line #1 or #2 lines from bottom")},
- {"Zm", 342 UNTIC_COMMENT("Set left (right) margin at column #1 (#2)")},
- {"Zn", 343 UNTIC_COMMENT("Set right margin at column #1")},
- {"Zo", 344 UNTIC_COMMENT("Set top margin at current line")},
- {"Zp", 345 UNTIC_COMMENT("Set top (bottom) margin at row #1 (#2)")},
- {"Zq", 346 UNTIC_COMMENT("Start printing bit image braphics")},
- {"Zr", 347 UNTIC_COMMENT("Start character set definition")},
- {"Zs", 348 UNTIC_COMMENT("Stop printing bit image graphics")},
- {"Zt", 349 UNTIC_COMMENT("End definition of character aet")},
- {"Zu", 350 UNTIC_COMMENT("List of subscriptable characters")},
- {"Zv", 351 UNTIC_COMMENT("List of superscriptable characters")},
- {"Zw", 352 UNTIC_COMMENT("Printing any of these chars causes CR")},
- {"Zx", 353 UNTIC_COMMENT("No motion for subsequent character")},
- {"Zy", 354 UNTIC_COMMENT("List of character set names")},
- {"Zz", 371 UNTIC_COMMENT("Move to next row of the bit image")},
- {"ac", 146 UNTIC_COMMENT("acs_chars")},
- {"ae", 38 UNTIC_COMMENT("exit_alt_charset_mode")},
- {"al", 53 UNTIC_COMMENT("insert line")},
- {"as", 25 UNTIC_COMMENT("enter_alt_charset_mode")},
- {"bc", 395 UNTIC_COMMENT("move left, if not ^H")},
- {"bl", 1 UNTIC_COMMENT("audible signal (bell)")},
- {"bt", 0 UNTIC_COMMENT("back tab")},
- {"bx", 411 UNTIC_COMMENT("box chars primary set")},
- {"cb", 269 UNTIC_COMMENT("Clear to beginning of line")},
- {"cd", 7 UNTIC_COMMENT("clear to end of screen")},
- {"ce", 6 UNTIC_COMMENT("clr_eol")},
- {"ch", 8 UNTIC_COMMENT("horizontal position #1, absolute")},
- {"ci", 363 UNTIC_COMMENT("Init sequence for multiple codesets")},
- {"cl", 5 UNTIC_COMMENT("clear screen and home cursor")},
- {"cm", 10 UNTIC_COMMENT("move to row #1 columns #2")},
- {"cr", 2 UNTIC_COMMENT("carriage return")},
- {"cs", 3 UNTIC_COMMENT("change region to line #1 to line #2")},
- {"ct", 4 UNTIC_COMMENT("clear all tab stops")},
- {"cv", 127 UNTIC_COMMENT("vertical position #1 absolute")},
- {"dc", 21 UNTIC_COMMENT("delete character")},
- {"dl", 22 UNTIC_COMMENT("delete line")},
- {"dm", 29 UNTIC_COMMENT("enter delete mode")},
- {"do", 11 UNTIC_COMMENT("down one line")},
- {"ds", 23 UNTIC_COMMENT("disable status line")},
- {"dv", 362 UNTIC_COMMENT("Indicate language/codeset support")},
- {"eA", 155 UNTIC_COMMENT("enable alternate char set")},
- {"ec", 37 UNTIC_COMMENT("erase #1 characters")},
- {"ed", 41 UNTIC_COMMENT("end delete mode")},
- {"ei", 42 UNTIC_COMMENT("exit insert mode")},
- {"ff", 46 UNTIC_COMMENT("hardcopy terminal page eject")},
- {"fh", 284 UNTIC_COMMENT("flash switch hook")},
- {"fs", 47 UNTIC_COMMENT("return from status line")},
- {"hd", 24 UNTIC_COMMENT("half a line down")},
- {"ho", 12 UNTIC_COMMENT("home cursor (if no cup)")},
- {"hu", 137 UNTIC_COMMENT("half a line up")},
- {"i1", 48 UNTIC_COMMENT("initialization string")},
- {"i2", 392 UNTIC_COMMENT("secondary initialization string")},
- {"i3", 50 UNTIC_COMMENT("initialization string")},
- {"iP", 138 UNTIC_COMMENT("path name of program for initialization")},
- {"ic", 52 UNTIC_COMMENT("insert character")},
- {"if", 51 UNTIC_COMMENT("name of initialization file")},
- {"im", 31 UNTIC_COMMENT("enter insert mode")},
- {"ip", 54 UNTIC_COMMENT("insert padding after inserted character")},
- {"is", 49 UNTIC_COMMENT("initialization string")},
- {"k0", 65 UNTIC_COMMENT("F0 function key")},
- {"k1", 66 UNTIC_COMMENT("F1 function key")},
- {"k2", 68 UNTIC_COMMENT("F2 function key")},
- {"k3", 69 UNTIC_COMMENT("F3 function key")},
- {"k4", 70 UNTIC_COMMENT("F4 function key")},
- {"k5", 71 UNTIC_COMMENT("F5 function key")},
- {"k6", 72 UNTIC_COMMENT("F6 function key")},
- {"k7", 73 UNTIC_COMMENT("F7 function key")},
- {"k8", 74 UNTIC_COMMENT("F8 fucntion key")},
- {"k9", 75 UNTIC_COMMENT("F9 function key")},
- {"k;", 67 UNTIC_COMMENT("F10 function key")},
- {"kA", 78 UNTIC_COMMENT("insert-line key")},
- {"kB", 148 UNTIC_COMMENT("back-tab key")},
- {"kC", 57 UNTIC_COMMENT("clear-screen or erase key")},
- {"kD", 59 UNTIC_COMMENT("delete-character key")},
- {"kE", 63 UNTIC_COMMENT("clear-to-end-of-line key")},
- {"kF", 84 UNTIC_COMMENT("scroll-forward key")},
- {"kH", 80 UNTIC_COMMENT("last-line key")},
- {"kI", 77 UNTIC_COMMENT("insert-character key")},
- {"kL", 60 UNTIC_COMMENT("delete-line key")},
- {"kM", 62 UNTIC_COMMENT("sent by rmir or smir in insert mode")},
- {"kN", 81 UNTIC_COMMENT("next-page key")},
- {"kP", 82 UNTIC_COMMENT("prev-page key")},
- {"kR", 85 UNTIC_COMMENT("scroll-backward key")},
- {"kS", 64 UNTIC_COMMENT("clear-to-end-of-screen key")},
- {"kT", 86 UNTIC_COMMENT("set-tab key")},
- {"ka", 56 UNTIC_COMMENT("clear-all-tabs key")},
- {"kb", 55 UNTIC_COMMENT("backspace key")},
- {"kd", 61 UNTIC_COMMENT("down-arrow key")},
- {"ke", 88 UNTIC_COMMENT("leave 'keyboard_transmit' mode")},
- {"kh", 76 UNTIC_COMMENT("home key")},
- {"kl", 79 UNTIC_COMMENT("left-arrow key")},
- {"ko", 396 UNTIC_COMMENT("list of self-mapped keycaps")},
- {"kr", 83 UNTIC_COMMENT("right-arrow key")},
- {"ks", 89 UNTIC_COMMENT("enter 'keyboard_transmit' mode")},
- {"kt", 58 UNTIC_COMMENT("clear-tab key")},
- {"ku", 87 UNTIC_COMMENT("up-arrow key")},
- {"l0", 90 UNTIC_COMMENT("label on function key f0 if not f0")},
- {"l1", 91 UNTIC_COMMENT("label on function key f1 if not f1")},
- {"l2", 93 UNTIC_COMMENT("label on function key f2 if not f2")},
- {"l3", 94 UNTIC_COMMENT("label on function key f3 if not f3")},
- {"l4", 95 UNTIC_COMMENT("label on function key f4 if not f4")},
- {"l5", 96 UNTIC_COMMENT("lable on function key f5 if not f5")},
- {"l6", 97 UNTIC_COMMENT("label on function key f6 if not f6")},
- {"l7", 98 UNTIC_COMMENT("label on function key f7 if not f7")},
- {"l8", 99 UNTIC_COMMENT("label on function key f8 if not f8")},
- {"l9", 100 UNTIC_COMMENT("label on function key f9 if not f9")},
- {"la", 92 UNTIC_COMMENT("label on function key f10 if not f10")},
- {"le", 14 UNTIC_COMMENT("move left one space")},
- {"ll", 18 UNTIC_COMMENT("last line, first column (if no cup)")},
- {"ma", 397 UNTIC_COMMENT("map arrow keys rogue(1) motion keys")},
- {"mb", 26 UNTIC_COMMENT("turn on blinking")},
- {"md", 27 UNTIC_COMMENT("turn on bold (extra bright) mode")},
- {"me", 39 UNTIC_COMMENT("turn off all attributes")},
- {"mh", 30 UNTIC_COMMENT("turn on half-bright mode")},
- {"mk", 32 UNTIC_COMMENT("turn on blank mode (characters invisible)")},
- {"ml", 409 UNTIC_COMMENT("memory lock above")},
- {"mm", 102 UNTIC_COMMENT("turn on meta mode (8th-bit on)")},
- {"mo", 101 UNTIC_COMMENT("turn off meta mode")},
- {"mp", 33 UNTIC_COMMENT("turn on protected mode")},
- {"mr", 34 UNTIC_COMMENT("turn on reverse video mode")},
- {"mu", 410 UNTIC_COMMENT("memory unlock")},
- {"nd", 17 UNTIC_COMMENT("move right one space")},
- {"nl", 394 UNTIC_COMMENT("use to move down")},
- {"nw", 103 UNTIC_COMMENT("newline (behave like cr followed by lf)")},
- {"oc", 298 UNTIC_COMMENT("Set all color pairs to the original ones")},
- {"op", 297 UNTIC_COMMENT("Set default pair to its original value")},
- {"pO", 144 UNTIC_COMMENT("turn on printer for #1 bytes")},
- {"pc", 104 UNTIC_COMMENT("padding char (instead of null)")},
- {"pf", 119 UNTIC_COMMENT("turn off printer")},
- {"pk", 115 UNTIC_COMMENT("program function key #1 to type string #2")},
- {"pl", 116 UNTIC_COMMENT("program function key #1 to execute string #2")},
- {"pn", 147 UNTIC_COMMENT("program label #1 to show string #2")},
- {"po", 120 UNTIC_COMMENT("turn on printer")},
- {"ps", 118 UNTIC_COMMENT("print contents of screen")},
- {"px", 117 UNTIC_COMMENT("program function key #1 to transmit string #2")},
- {"r1", 122 UNTIC_COMMENT("reset string")},
- {"r2", 123 UNTIC_COMMENT("reset string")},
- {"r3", 124 UNTIC_COMMENT("reset string")},
- {"rP", 145 UNTIC_COMMENT("like ip but when in insert mode")},
- {"rc", 126 UNTIC_COMMENT("restore cursor to last position of sc")},
- {"rf", 125 UNTIC_COMMENT("name of reset file")},
- {"rp", 121 UNTIC_COMMENT("repeat char #1 #2 times")},
- {"rs", 393 UNTIC_COMMENT("terminal reset string")},
- {"s0", 364 UNTIC_COMMENT("Shift to code set 0 (EUC set 0, ASCII)")},
- {"s1", 365 UNTIC_COMMENT("Shift to code set 1")},
- {"s2", 366 UNTIC_COMMENT("Shift to code set 2")},
- {"s3", 367 UNTIC_COMMENT("Shift to code set 3")},
- {"sa", 131 UNTIC_COMMENT("define video attributes #1-#9 (PG9)")},
- {"sc", 128 UNTIC_COMMENT("save current cursor position")},
- {"se", 43 UNTIC_COMMENT("exit standout mode")},
- {"sf", 129 UNTIC_COMMENT("scroll text up")},
- {"so", 35 UNTIC_COMMENT("begin standout mode")},
- {"sp", 301 UNTIC_COMMENT("Set current color pair to #1")},
- {"sr", 130 UNTIC_COMMENT("scroll text down")},
- {"st", 132 UNTIC_COMMENT("set a tab in every row, current columns")},
- {"ta", 134 UNTIC_COMMENT("tab to next 8-space hardware tab stop")},
- {"te", 40 UNTIC_COMMENT("strings to end programs using cup")},
- {"ti", 28 UNTIC_COMMENT("string to start programs using cup")},
- {"ts", 135 UNTIC_COMMENT("move to status line")},
- {"u0", 287 UNTIC_COMMENT("User string #0")},
- {"u1", 288 UNTIC_COMMENT("User string #1")},
- {"u2", 289 UNTIC_COMMENT("User string #2")},
- {"u3", 290 UNTIC_COMMENT("User string #3")},
- {"u4", 291 UNTIC_COMMENT("User string #4")},
- {"u5", 292 UNTIC_COMMENT("User string #5")},
- {"u6", 293 UNTIC_COMMENT("User string #6")},
- {"u7", 294 UNTIC_COMMENT("User string #7")},
- {"u8", 295 UNTIC_COMMENT("User string #8")},
- {"u9", 296 UNTIC_COMMENT("User string #9")},
- {"uc", 136 UNTIC_COMMENT("underline char and move past it")},
- {"ue", 44 UNTIC_COMMENT("exit underline mode")},
- {"up", 19 UNTIC_COMMENT("up one line")},
- {"us", 36 UNTIC_COMMENT("begin underline mode")},
- {"vb", 45 UNTIC_COMMENT("visible bell (may not move cursor)")},
- {"ve", 16 UNTIC_COMMENT("make cursor appear normal (undo civis/cvvis)")},
- {"vi", 13 UNTIC_COMMENT("make cursor invisible")},
- {"vs", 20 UNTIC_COMMENT("make cursor very visible")},
- {"wi", 133 UNTIC_COMMENT("current window is lines #1-#2 cols #3-#4")},
- {"xl", 361 UNTIC_COMMENT("Program function key #1 to type string #2 and show string #3")},
- {"", -1 UNTIC_COMMENT(NULL)}
-};
-
-static int compute_cap_offset (char *cap, SLterminfo_Type *t, Tgetstr_Map_Type *map, unsigned int max_ofs)
-{
- char cha, chb;
-
- (void) t;
- cha = *cap++; chb = *cap;
-
- while (*map->name != 0)
- {
- if ((cha == *map->name) && (chb == *(map->name + 1)))
- {
- if (map->offset >= (int) max_ofs) return -1;
- return map->offset;
- }
- map++;
- }
- return -1;
-}
-
-char *_SLtt_tigetstr (SLterminfo_Type *t, char *cap)
-{
- int offset;
-
- if (t == NULL)
- return NULL;
-
- if (t->flags == SLTERMCAP) return tcap_getstr (cap, t);
-
- offset = compute_cap_offset (cap, t, Tgetstr_Map, t->num_string_offsets);
- if (offset < 0) return NULL;
- offset = make_integer (t->string_offsets + 2 * offset);
- if (offset < 0) return NULL;
- return t->string_table + offset;
-}
-
-static Tgetstr_Map_Type Tgetnum_Map[] =
-{
- {"BT", 30 UNTIC_COMMENT("number of buttons on mouse")},
- {"Co", 13 UNTIC_COMMENT("maximum numbers of colors on screen")},
- {"MW", 12 UNTIC_COMMENT("maxumum number of defineable windows")},
- {"NC", 15 UNTIC_COMMENT("video attributes that can't be used with colors")},
- {"Nl", 8 UNTIC_COMMENT("number of labels on screen")},
- {"Ya", 16 UNTIC_COMMENT("numbers of bytes buffered before printing")},
- {"Yb", 17 UNTIC_COMMENT("spacing of pins vertically in pins per inch")},
- {"Yc", 18 UNTIC_COMMENT("spacing of dots horizontally in dots per inch")},
- {"Yd", 19 UNTIC_COMMENT("maximum value in micro_..._address")},
- {"Ye", 20 UNTIC_COMMENT("maximum value in parm_..._micro")},
- {"Yf", 21 UNTIC_COMMENT("character size when in micro mode")},
- {"Yg", 22 UNTIC_COMMENT("line size when in micro mode")},
- {"Yh", 23 UNTIC_COMMENT("numbers of pins in print-head")},
- {"Yi", 24 UNTIC_COMMENT("horizontal resolution in units per line")},
- {"Yj", 25 UNTIC_COMMENT("vertical resolution in units per line")},
- {"Yk", 26 UNTIC_COMMENT("horizontal resolution in units per inch")},
- {"Yl", 27 UNTIC_COMMENT("vertical resolution in units per inch")},
- {"Ym", 28 UNTIC_COMMENT("print rate in chars per second")},
- {"Yn", 29 UNTIC_COMMENT("character step size when in double wide mode")},
- {"Yo", 31 UNTIC_COMMENT("number of passed for each bit-image row")},
- {"Yp", 32 UNTIC_COMMENT("type of bit-image device")},
- {"co", 0 UNTIC_COMMENT("number of columns in aline")},
- {"dB", 36 UNTIC_COMMENT("padding required for ^H")},
- {"dC", 34 UNTIC_COMMENT("pad needed for CR")},
- {"dN", 35 UNTIC_COMMENT("pad needed for LF")},
- {"dT", 37 UNTIC_COMMENT("padding required for ^I")},
- {"it", 1 UNTIC_COMMENT("tabs initially every # spaces")},
- {"kn", 38 UNTIC_COMMENT("count of function keys")},
- {"lh", 9 UNTIC_COMMENT("rows in each label")},
- {"li", 2 UNTIC_COMMENT("number of lines on screen or page")},
- {"lm", 3 UNTIC_COMMENT("lines of memory if > line. 0 => varies")},
- {"lw", 10 UNTIC_COMMENT("columns in each label")},
- {"ma", 11 UNTIC_COMMENT("maximum combined attributes terminal can handle")},
- {"pa", 14 UNTIC_COMMENT("maximum number of color-pairs on the screen")},
- {"pb", 5 UNTIC_COMMENT("lowest baud rate where padding needed")},
- {"sg", 4 UNTIC_COMMENT("number of blank chars left by smso or rmso")},
- {"ug", 33 UNTIC_COMMENT("number of blanks left by ul")},
- {"vt", 6 UNTIC_COMMENT("virtual terminal number (CB/unix)")},
- {"ws", 7 UNTIC_COMMENT("columns in status line")},
- {"", -1 UNTIC_COMMENT(NULL)}
-};
-
-int _SLtt_tigetnum (SLterminfo_Type *t, char *cap)
-{
- int offset;
-
- if (t == NULL)
- return -1;
-
- if (t->flags == SLTERMCAP) return tcap_getnum (cap, t);
-
- offset = compute_cap_offset (cap, t, Tgetnum_Map, t->num_numbers);
- if (offset < 0) return -1;
- return make_integer (t->numbers + 2 * offset);
-}
-
-static Tgetstr_Map_Type Tgetflag_Map[] =
-{
- {"5i", 22 UNTIC_COMMENT("printer won't echo on screen")},
- {"HC", 23 UNTIC_COMMENT("cursor is hard to see")},
- {"MT", 40 UNTIC_COMMENT("has meta key")},
- {"ND", 26 UNTIC_COMMENT("scrolling region is non-destructive")},
- {"NL", 41 UNTIC_COMMENT("move down with \n")},
- {"NP", 25 UNTIC_COMMENT("pad character does not exist")},
- {"NR", 24 UNTIC_COMMENT("smcup does not reverse rmcup")},
- {"YA", 30 UNTIC_COMMENT("only positive motion for hpa/mhpa caps")},
- {"YB", 31 UNTIC_COMMENT("using cr turns off micro mode")},
- {"YC", 32 UNTIC_COMMENT("printer needs operator to change character set")},
- {"YD", 33 UNTIC_COMMENT("only positive motion for vpa/mvpa caps")},
- {"YE", 34 UNTIC_COMMENT("printing in last column causes cr")},
- {"YF", 35 UNTIC_COMMENT("changing character pitch changes resolution")},
- {"YG", 36 UNTIC_COMMENT("changing line pitch changes resolution")},
- {"am", 1 UNTIC_COMMENT("terminal has automatic margins")},
- {"bs", 37 UNTIC_COMMENT("uses ^H to move left")},
- {"bw", 0 UNTIC_COMMENT("cub1 wraps from column 0 to last column")},
- {"cc", 27 UNTIC_COMMENT("terminal can re-define existing colors")},
- {"da", 11 UNTIC_COMMENT("display may be retained above the screen")},
- {"db", 12 UNTIC_COMMENT("display may be retained below the screen")},
- {"eo", 5 UNTIC_COMMENT("can erase overstrikes with a blank")},
- {"es", 16 UNTIC_COMMENT("escape can be used on the status line")},
- {"gn", 6 UNTIC_COMMENT("generic line type")},
- {"hc", 7 UNTIC_COMMENT("hardcopy terminal")},
- {"hl", 29 UNTIC_COMMENT("terminal uses only HLS color notation (tektronix)")},
- {"hs", 9 UNTIC_COMMENT("has extra status line")},
- {"hz", 18 UNTIC_COMMENT("can't print ~'s (hazeltine)")},
- {"in", 10 UNTIC_COMMENT("insert mode distinguishes nulls")},
- {"km", 8 UNTIC_COMMENT("Has a meta key, sets msb high")},
- {"mi", 13 UNTIC_COMMENT("safe to move while in insert mode")},
- {"ms", 14 UNTIC_COMMENT("safe to move while in standout mode")},
- {"nc", 39 UNTIC_COMMENT("no way to go to start of line")},
- {"ns", 38 UNTIC_COMMENT("crt cannot scroll")},
- {"nx", 21 UNTIC_COMMENT("padding won't work, xon/xoff required")},
- {"os", 15 UNTIC_COMMENT("terminal can overstrike")},
- {"pt", 42 UNTIC_COMMENT("has 8-char tabs invoked with ^I")},
- {"ul", 19 UNTIC_COMMENT("underline character overstrikes")},
- {"ut", 28 UNTIC_COMMENT("screen erased with background color")},
- {"xb", 2 UNTIC_COMMENT("beehive (f1=escape, f2=ctrl C)")},
- {"xn", 4 UNTIC_COMMENT("newline ignored after 80 cols (concept)")},
- {"xo", 20 UNTIC_COMMENT("terminal uses xon/xoff handshaking")},
- {"xr", 43 UNTIC_COMMENT("return clears the line")},
- {"xs", 3 UNTIC_COMMENT("standout not erased by overwriting (hp)")},
- {"xt", 17 UNTIC_COMMENT("tabs destructive, magic so char (t1061)")},
- {"", -1 UNTIC_COMMENT(NULL)}
-};
-
-int _SLtt_tigetflag (SLterminfo_Type *t, char *cap)
-{
- int offset;
-
- if (t == NULL) return -1;
-
- if (t->flags == SLTERMCAP) return tcap_getflag (cap, t);
-
- offset = compute_cap_offset (cap, t, Tgetflag_Map, t->boolean_section_size);
-
- if (offset < 0) return -1;
- return (int) *(t->boolean_flags + offset);
-}
-
-/* These are my termcap routines. They only work with the TERMCAP environment
- * variable. This variable must contain the termcap entry and NOT the file.
- */
-
-static int tcap_getflag (char *cap, SLterminfo_Type *t)
-{
- char a, b;
- char *f = (char *) t->boolean_flags;
- char *fmax;
-
- if (f == NULL) return 0;
- fmax = f + t->boolean_section_size;
-
- a = *cap;
- b = *(cap + 1);
- while (f < fmax)
- {
- if ((a == f[0]) && (b == f[1]))
- return 1;
- f += 2;
- }
- return 0;
-}
-
-static char *tcap_get_cap (unsigned char *cap, unsigned char *caps, unsigned int len)
-{
- unsigned char c0, c1;
- unsigned char *caps_max;
-
- c0 = cap[0];
- c1 = cap[1];
-
- if (caps == NULL) return NULL;
- caps_max = caps + len;
- while (caps < caps_max)
- {
- if ((c0 == caps[0]) && (c1 == caps[1]))
- {
- return (char *) caps + 3;
- }
- caps += (int) caps[2];
- }
- return NULL;
-}
-
-static int tcap_getnum (char *cap, SLterminfo_Type *t)
-{
- cap = tcap_get_cap ((unsigned char *) cap, t->numbers, t->num_numbers);
- if (cap == NULL) return -1;
- return atoi (cap);
-}
-
-static char *tcap_getstr (char *cap, SLterminfo_Type *t)
-{
- return tcap_get_cap ((unsigned char *) cap, (unsigned char *) t->string_table, t->string_table_size);
-}
-
-static int tcap_extract_field (unsigned char *t0)
-{
- register unsigned char ch, *t = t0;
- while (((ch = *t) != 0) && (ch != ':')) t++;
- if (ch == ':') return (int) (t - t0);
- return -1;
-}
-
-int SLtt_Try_Termcap = 1;
-static int tcap_getent (char *term, SLterminfo_Type *ti)
-{
- unsigned char *termcap, ch;
- unsigned char *buf, *b;
- unsigned char *t;
- int len;
-
- if (SLtt_Try_Termcap == 0) return -1;
-#if 1
- /* XFREE86 xterm sets the TERMCAP environment variable to an invalid
- * value. Specifically, it lacks the tc= string.
- */
- if (!strncmp (term, "xterm", 5))
- return -1;
-#endif
- termcap = (unsigned char *) getenv ("TERMCAP");
- if ((termcap == NULL) || (*termcap == '/')) return -1;
-
- /* We have a termcap so lets use it provided it does not have a reference
- * to another terminal via tc=. In that case, use terminfo. The alternative
- * would be to parse the termcap file which I do not want to do right now.
- * Besides, this is a terminfo based system and if the termcap were parsed
- * terminfo would almost never get a chance to run. In addition, the tc=
- * thing should not occur if tset is used to set the termcap entry.
- */
- t = termcap;
- while ((len = tcap_extract_field (t)) != -1)
- {
- if ((len > 3) && (t[0] == 't') && (t[1] == 'c') && (t[2] == '='))
- return -1;
- t += (len + 1);
- }
-
- /* malloc some extra space just in case it is needed. */
- len = strlen ((char *) termcap) + 256;
- if (NULL == (buf = (unsigned char *) SLmalloc ((unsigned int) len))) return -1;
-
- b = buf;
-
- /* The beginning of the termcap entry contains the names of the entry.
- * It is terminated by a colon.
- */
-
- ti->terminal_names = (char *) b;
- t = termcap;
- len = tcap_extract_field (t);
- if (len < 0)
- {
- SLfree ((char *)buf);
- return -1;
- }
- strncpy ((char *) b, (char *) t, (unsigned int) len);
- b[len] = 0;
- b += len + 1;
- ti->name_section_size = len;
-
- /* Now, we are really at the start of the termcap entries. Point the
- * termcap variable here since we want to refer to this a number of times.
- */
- termcap = t + (len + 1);
-
- /* Process strings first. */
- ti->string_table = (char *) b;
- t = termcap;
- while (-1 != (len = tcap_extract_field (t)))
- {
- unsigned char *b1;
- unsigned char *tmax;
-
- /* We are looking for: XX=something */
- if ((len < 4) || (t[2] != '=') || (*t == '.'))
- {
- t += len + 1;
- continue;
- }
- tmax = t + len;
- b1 = b;
-
- while (t < tmax)
- {
- ch = *t++;
- if ((ch == '\\') && (t < tmax))
- {
- t = (unsigned char *) _SLexpand_escaped_char ((char *) t, (char *) &ch);
- }
- else if ((ch == '^') && (t < tmax))
- {
- ch = *t++;
- if (ch == '?') ch = 127;
- else ch = (ch | 0x20) - ('a' - 1);
- }
- *b++ = ch;
- }
- /* Null terminate it. */
- *b++ = 0;
- len = (int) (b - b1);
- b1[2] = (unsigned char) len; /* replace the = by the length */
- /* skip colon to next field. */
- t++;
- }
- ti->string_table_size = (int) (b - (unsigned char *) ti->string_table);
-
- /* Now process the numbers. */
-
- t = termcap;
- ti->numbers = b;
- while (-1 != (len = tcap_extract_field (t)))
- {
- unsigned char *b1;
- unsigned char *tmax;
-
- /* We are looking for: XX#NUMBER */
- if ((len < 4) || (t[2] != '#') || (*t == '.'))
- {
- t += len + 1;
- continue;
- }
- tmax = t + len;
- b1 = b;
-
- while (t < tmax)
- {
- *b++ = *t++;
- }
- /* Null terminate it. */
- *b++ = 0;
- len = (int) (b - b1);
- b1[2] = (unsigned char) len; /* replace the # by the length */
- t++;
- }
- ti->num_numbers = (int) (b - ti->numbers);
-
- /* Now process the flags. */
- t = termcap;
- ti->boolean_flags = b;
- while (-1 != (len = tcap_extract_field (t)))
- {
- /* We are looking for: XX#NUMBER */
- if ((len != 2) || (*t == '.') || (*t <= ' '))
- {
- t += len + 1;
- continue;
- }
- b[0] = t[0];
- b[1] = t[1];
- t += 3;
- b += 2;
- }
- ti->boolean_section_size = (int) (b - ti->boolean_flags);
- ti->flags = SLTERMCAP;
- return 0;
-}
-
-
-/* These routines are provided only for backward binary compatability.
- * They will vanish in V2.x
- */
-char *SLtt_tigetent (char *s)
-{
- return (char *) _SLtt_tigetent (s);
-}
-
-extern char *SLtt_tigetstr (char *s, char **p)
-{
- if (p == NULL)
- return NULL;
- return _SLtt_tigetstr ((SLterminfo_Type *) *p, s);
-}
-
-extern int SLtt_tigetnum (char *s, char **p)
-{
- if (p == NULL)
- return -1;
- return _SLtt_tigetnum ((SLterminfo_Type *) *p, s);
-}
-
-
diff --git a/mdk-stage1/slang/sltime.c b/mdk-stage1/slang/sltime.c
deleted file mode 100644
index 14fc6ec16..000000000
--- a/mdk-stage1/slang/sltime.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/* time related system calls */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <sys/types.h>
-#include <time.h>
-
-#if defined(__BORLANDC__)
-# include <dos.h>
-#endif
-#if defined(__GO32__) || defined(__WATCOMC__)
-# include <dos.h>
-# include <bios.h>
-#endif
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef __WIN32__
-#include <windows.h>
-/* Sleep is defined badly in MSVC... */
-# ifdef _MSC_VER
-# define sleep(n) _sleep((n)*1000)
-# else
-# ifdef sleep
-# undef sleep
-# endif
-# define sleep(x) if(x)Sleep((x)*1000)
-# endif
-#endif
-
-
-#if defined(IBMPC_SYSTEM)
-/* For other system (Unix and VMS), _SLusleep is in sldisply.c */
-int _SLusleep (unsigned long s)
-{
- sleep (s/1000000L);
- s = s % 1000000L;
-
-# if defined(__WIN32__)
- Sleep (s/1000);
-#else
-# if defined(__IBMC__)
- DosSleep(s/1000);
-# else
-# if defined(_MSC_VER)
- _sleep (s/1000);
-# endif
-# endif
-#endif
- return 0;
-}
-#endif
-
-#if defined(__IBMC__) && !defined(_AIX)
-/* sleep is not a standard function in VA3. */
-unsigned int sleep (unsigned int seconds)
-{
- DosSleep(1000L * ((long)seconds));
- return 0;
-}
-#endif
-
-static char *ctime_cmd (unsigned long *tt)
-{
- char *t;
-
- t = ctime ((time_t *) tt);
- t[24] = 0; /* knock off \n */
- return (t);
-}
-
-static void sleep_cmd (void)
-{
- unsigned int secs;
-#if SLANG_HAS_FLOAT
- unsigned long usecs;
- double x;
-
- if (-1 == SLang_pop_double (&x, NULL, NULL))
- return;
-
- if (x < 0.0)
- x = 0.0;
- secs = (unsigned int) x;
- sleep (secs);
- x -= (double) secs;
- usecs = (unsigned long) (1e6 * x);
- if (usecs > 0) _SLusleep (usecs);
-#else
- if (-1 == SLang_pop_uinteger (&secs))
- return;
- if (secs != 0) sleep (secs);
-#endif
-}
-
-static unsigned long _time_cmd (void)
-{
- return (unsigned long) time (NULL);
-}
-
-#if defined(__GO32__)
-static char *djgpp_current_time (void) /*{{{*/
-{
- union REGS rg;
- unsigned int year;
- unsigned char month, day, weekday, hour, minute, sec;
- char days[] = "SunMonTueWedThuFriSat";
- char months[] = "JanFebMarAprMayJunJulAugSepOctNovDec";
- static char the_date[26];
-
- rg.h.ah = 0x2A;
-#ifndef __WATCOMC__
- int86(0x21, &rg, &rg);
- year = rg.x.cx & 0xFFFF;
-#else
- int386(0x21, &rg, &rg);
- year = rg.x.ecx & 0xFFFF;
-#endif
-
- month = 3 * (rg.h.dh - 1);
- day = rg.h.dl;
- weekday = 3 * rg.h.al;
-
- rg.h.ah = 0x2C;
-
-#ifndef __WATCOMC__
- int86(0x21, &rg, &rg);
-#else
- int386(0x21, &rg, &rg);
-#endif
-
- hour = rg.h.ch;
- minute = rg.h.cl;
- sec = rg.h.dh;
-
- /* we want this form: Thu Apr 14 15:43:39 1994\n */
- sprintf(the_date, "%.3s %.3s%3d %02d:%02d:%02d %d\n",
- days + weekday, months + month,
- day, hour, minute, sec, year);
- return the_date;
-}
-
-/*}}}*/
-
-#endif
-
-char *SLcurrent_time_string (void) /*{{{*/
-{
- char *the_time;
-#ifndef __GO32__
- time_t myclock;
-
- myclock = time((time_t *) 0);
- the_time = (char *) ctime(&myclock);
-#else
- the_time = djgpp_current_time ();
-#endif
- /* returns the form Sun Sep 16 01:03:52 1985\n\0 */
- the_time[24] = '\0';
- return(the_time);
-}
-
-/*}}}*/
-
-static int push_tm_struct (struct tm *tms)
-{
- char *field_names [9];
- unsigned char field_types[9];
- VOID_STAR field_values [9];
- int int_values [9];
- unsigned int i;
-
- if (tms == NULL)
- return SLang_push_null ();
-
- field_names [0] = "tm_sec"; int_values [0] = tms->tm_sec;
- field_names [1] = "tm_min"; int_values [1] = tms->tm_min;
- field_names [2] = "tm_hour"; int_values [2] = tms->tm_hour;
- field_names [3] = "tm_mday"; int_values [3] = tms->tm_mday;
- field_names [4] = "tm_mon"; int_values [4] = tms->tm_mon;
- field_names [5] = "tm_year"; int_values [5] = tms->tm_year;
- field_names [6] = "tm_wday"; int_values [6] = tms->tm_wday;
- field_names [7] = "tm_yday"; int_values [7] = tms->tm_yday;
- field_names [8] = "tm_isdst"; int_values [8] = tms->tm_isdst;
-
- for (i = 0; i < 9; i++)
- {
- field_types [i] = SLANG_INT_TYPE;
- field_values [i] = (VOID_STAR) (int_values + i);
- }
-
- return SLstruct_create_struct (9, field_names, field_types, field_values);
-}
-
-
-static void localtime_cmd (long *t)
-{
- time_t tt = (time_t) *t;
- (void) push_tm_struct (localtime (&tt));
-}
-
-static void gmtime_cmd (long *t)
-{
-#ifdef HAVE_GMTIME
- time_t tt = (time_t) *t;
- (void) push_tm_struct (gmtime (&tt));
-#else
- localtime_cmd (t);
-#endif
-}
-
-#ifdef HAVE_TIMES
-
-# ifdef HAVE_SYS_TIMES_H
-# include <sys/times.h>
-# endif
-
-#include <limits.h>
-
-#ifdef CLK_TCK
-# define SECS_PER_TICK (1.0/(double)CLK_TCK)
-#else
-# ifdef CLOCKS_PER_SEC
-# define SECS_PER_TICK (1.0/(double)CLOCKS_PER_SEC)
-# else
-# define SECS_PER_TICK (1.0/60.0)
-# endif
-#endif
-
-static void times_cmd (void)
-{
- double dvals[4];
- struct tms t;
- VOID_STAR field_values[4];
- char *field_names[4];
- unsigned int i;
- unsigned char field_types[4];
-
- (void) times (&t);
-
- field_names[0] = "tms_utime"; dvals[0] = (double)t.tms_utime;
- field_names[1] = "tms_stime"; dvals[1] = (double)t.tms_stime;
- field_names[2] = "tms_cutime"; dvals[2] = (double)t.tms_cutime;
- field_names[3] = "tms_cstime"; dvals[3] = (double)t.tms_cstime;
-
- for (i = 0; i < 4; i++)
- {
- dvals[i] *= SECS_PER_TICK;
- field_values[i] = (VOID_STAR) &dvals[i];
- field_types[i] = SLANG_DOUBLE_TYPE;
- }
- (void) SLstruct_create_struct (4, field_names, field_types, field_values);
-}
-
-static struct tms Tic_TMS;
-
-static void tic_cmd (void)
-{
- (void) times (&Tic_TMS);
-}
-
-static double toc_cmd (void)
-{
- struct tms t;
- double d;
-
- (void) times (&t);
- d = ((t.tms_utime - Tic_TMS.tms_utime)
- + (t.tms_stime - Tic_TMS.tms_stime)) * SECS_PER_TICK;
- Tic_TMS = t;
- return d;
-}
-
-#endif /* HAVE_TIMES */
-
-
-static SLang_Intrin_Fun_Type Time_Funs_Table [] =
-{
- MAKE_INTRINSIC_1("ctime", ctime_cmd, SLANG_STRING_TYPE, SLANG_ULONG_TYPE),
- MAKE_INTRINSIC_0("sleep", sleep_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("_time", _time_cmd, SLANG_ULONG_TYPE),
- MAKE_INTRINSIC_0("time", SLcurrent_time_string, SLANG_STRING_TYPE),
- MAKE_INTRINSIC_1("localtime", localtime_cmd, SLANG_VOID_TYPE, SLANG_LONG_TYPE),
- MAKE_INTRINSIC_1("gmtime", gmtime_cmd, SLANG_VOID_TYPE, SLANG_LONG_TYPE),
-
-#ifdef HAVE_TIMES
- MAKE_INTRINSIC_0("times", times_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("tic", tic_cmd, SLANG_VOID_TYPE),
- MAKE_INTRINSIC_0("toc", toc_cmd, SLANG_DOUBLE_TYPE),
-#endif
- SLANG_END_INTRIN_FUN_TABLE
-};
-
-int _SLang_init_sltime (void)
-{
-#ifdef HAVE_TIMES
- (void) tic_cmd ();
-#endif
- return SLadd_intrin_fun_table (Time_Funs_Table, NULL);
-}
-
diff --git a/mdk-stage1/slang/sltoken.c b/mdk-stage1/slang/sltoken.c
deleted file mode 100644
index d08967a24..000000000
--- a/mdk-stage1/slang/sltoken.c
+++ /dev/null
@@ -1,1702 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define MAX_TOKEN_LEN 254
-#define MAX_FILE_LINE_LEN 256
-
-static char Empty_Line[1] = {0};
-
-static int Default_Compile_Line_Num_Info;
-static char *Input_Line = Empty_Line;
-static char *Input_Line_Pointer;
-
-static SLPreprocess_Type *This_SLpp;
-
-static SLang_Load_Type *LLT;
-
-static char *map_token_to_string (_SLang_Token_Type *tok)
-{
- char *s;
- static char numbuf [32];
- unsigned char type;
- s = NULL;
-
- if (tok != NULL) type = tok->type;
- else type = 0;
-
- switch (type)
- {
- case 0:
- s = "??";
- break;
-
- case CHAR_TOKEN:
- case SHORT_TOKEN:
- case INT_TOKEN:
- case LONG_TOKEN:
- s = numbuf;
- sprintf (s, "%ld", tok->v.long_val);
- break;
-
- case UCHAR_TOKEN:
- case USHORT_TOKEN:
- case UINT_TOKEN:
- case ULONG_TOKEN:
- s = numbuf;
- sprintf (s, "%lu", (unsigned long)tok->v.long_val);
- break;
-
- case OBRACKET_TOKEN: s = "["; break;
- case CBRACKET_TOKEN: s = "]"; break;
- case OPAREN_TOKEN: s = "("; break;
- case CPAREN_TOKEN: s = ")"; break;
- case OBRACE_TOKEN: s = "{"; break;
- case CBRACE_TOKEN: s = "}"; break;
- case DEREF_TOKEN: s = "@"; break;
- case POUND_TOKEN: s = "#"; break;
- case COMMA_TOKEN: s = ","; break;
- case SEMICOLON_TOKEN: s = ";"; break;
- case COLON_TOKEN: s = ":"; break;
-
-#if SLANG_HAS_FLOAT
- case FLOAT_TOKEN:
- case DOUBLE_TOKEN:
- case COMPLEX_TOKEN:
-#endif
- case IDENT_TOKEN:
- if ((tok->free_sval_flag == 0) || (tok->num_refs == 0))
- break;
- /* drop */
- default:
- s = tok->v.s_val;
- break;
- }
-
- if (s == NULL)
- {
- s = numbuf;
- sprintf (s, "(0x%02X)", type);
- }
-
- return s;
-}
-
-static char *make_line_file_error (char *buf, unsigned int buflen,
- _SLang_Token_Type *tok, char *dsc, int line, char *file)
-{
-#if _SLANG_HAS_DEBUG_CODE
- if (tok != NULL) line = tok->line_number;
-#endif
- if (file == NULL) file = "??";
-
- (void) _SLsnprintf (buf, buflen, "%s: found '%s', line %d, file: %s",
- dsc, map_token_to_string (tok), line, file);
-
- return buf;
-}
-
-void _SLparse_error(char *str, _SLang_Token_Type *tok, int flag)
-{
- char buf [1024];
-
- if (str == NULL)
- str = "Parse Error";
-
- make_line_file_error (buf, sizeof (buf), tok, str, LLT->line_num, (char *) LLT->name);
-
- if ((flag == 0) && SLang_Error)
- return;
-
- SLang_verror (SL_SYNTAX_ERROR, "%s", buf);
-}
-
-static void do_line_file_error (int line, char *file)
-{
- SLang_verror (SL_SYNTAX_ERROR,
- "called from line %d, file: %s", line, file);
-}
-
-#define ALPHA_CHAR 1
-#define DIGIT_CHAR 2
-#define EXCL_CHAR 3
-#define SEP_CHAR 4
-#define OP_CHAR 5
-#define DOT_CHAR 6
-#define BOLDOT_CHAR 7
-#define DQUOTE_CHAR 8
-#define QUOTE_CHAR 9
-#define COMMENT_CHAR 10
-#define NL_CHAR 11
-#define BAD_CHAR 12
-#define WHITE_CHAR 13
-
-#define CHAR_EOF 255
-
-#define CHAR_CLASS(c) (Char_Type_Table[(c)][0])
-#define CHAR_DATA(c) (Char_Type_Table[(c)][1])
-
-/* In this table, if a single character can represent an operator, e.g.,
- * '&' (BAND_TOKEN), then it must be placed before multiple-character
- * operators that begin with the same character, e.g., "&=". See
- * get_op_token to see how this is exploited.
- *
- * The third character null terminates the operator string. This is for
- * the token structure.
- */
-static char Operators [29][4] =
-{
-#define OFS_EXCL 0
- {'!', '=', 0, NE_TOKEN},
-#define OFS_POUND 1
- {'#', 0, 0, POUND_TOKEN},
-#define OFS_BAND 2
- {'&', 0, 0, BAND_TOKEN},
- {'&', '&', 0, EOF_TOKEN},
- {'&', '=', 0, BANDEQS_TOKEN},
-#define OFS_STAR 5
- {'*', 0, 0, TIMES_TOKEN},
- {'*', '=', 0, TIMESEQS_TOKEN},
-#define OFS_PLUS 7
- {'+', 0, 0, ADD_TOKEN},
- {'+', '+', 0, PLUSPLUS_TOKEN},
- {'+', '=', 0, PLUSEQS_TOKEN},
-#define OFS_MINUS 10
- {'-', 0, 0, SUB_TOKEN},
- {'-', '-', 0, MINUSMINUS_TOKEN},
- {'-', '=', 0, MINUSEQS_TOKEN},
- {'-', '>', 0, NAMESPACE_TOKEN},
-#define OFS_DIV 14
- {'/', 0, 0, DIV_TOKEN},
- {'/', '=', 0, DIVEQS_TOKEN},
-#define OFS_LT 16
- {'<', 0, 0, LT_TOKEN},
- {'<', '=', 0, LE_TOKEN},
-#define OFS_EQS 18
- {'=', 0, 0, ASSIGN_TOKEN},
- {'=', '=', 0, EQ_TOKEN},
-#define OFS_GT 20
- {'>', 0, 0, GT_TOKEN},
- {'>', '=', 0, GE_TOKEN},
-#define OFS_AT 22
- {'@', 0, 0, DEREF_TOKEN},
-#define OFS_POW 23
- {'^', 0, 0, POW_TOKEN},
-#define OFS_BOR 24
- {'|', 0, 0, BOR_TOKEN},
- {'|', '|', 0, EOF_TOKEN},
- {'|', '=', 0, BOREQS_TOKEN},
-#define OFS_BNOT 27
- {'~', 0, 0, BNOT_TOKEN},
- { 0, 0, 0, EOF_TOKEN}
-};
-
-static unsigned char Char_Type_Table[256][2] =
-{
- { NL_CHAR, 0 }, /* 0x0 */ { BAD_CHAR, 0 }, /* 0x1 */
- { BAD_CHAR, 0 }, /* 0x2 */ { BAD_CHAR, 0 }, /* 0x3 */
- { BAD_CHAR, 0 }, /* 0x4 */ { BAD_CHAR, 0 }, /* 0x5 */
- { BAD_CHAR, 0 }, /* 0x6 */ { BAD_CHAR, 0 }, /* 0x7 */
- { WHITE_CHAR, 0 }, /* 0x8 */ { WHITE_CHAR, 0 }, /* 0x9 */
- { NL_CHAR, 0 }, /* \n */ { WHITE_CHAR, 0 }, /* 0xb */
- { WHITE_CHAR, 0 }, /* 0xc */ { WHITE_CHAR, 0 }, /* \r */
- { BAD_CHAR, 0 }, /* 0xe */ { BAD_CHAR, 0 }, /* 0xf */
- { BAD_CHAR, 0 }, /* 0x10 */ { BAD_CHAR, 0 }, /* 0x11 */
- { BAD_CHAR, 0 }, /* 0x12 */ { BAD_CHAR, 0 }, /* 0x13 */
- { BAD_CHAR, 0 }, /* 0x14 */ { BAD_CHAR, 0 }, /* 0x15 */
- { BAD_CHAR, 0 }, /* 0x16 */ { BAD_CHAR, 0 }, /* 0x17 */
- { BAD_CHAR, 0 }, /* 0x18 */ { BAD_CHAR, 0 }, /* 0x19 */
- { BAD_CHAR, 0 }, /* 0x1a */ { BAD_CHAR, 0 }, /* 0x1b */
- { BAD_CHAR, 0 }, /* 0x1c */ { BAD_CHAR, 0 }, /* 0x1d */
- { BAD_CHAR, 0 }, /* 0x1e */ { BAD_CHAR, 0 }, /* 0x1f */
- { WHITE_CHAR, 0 }, /* 0x20 */ { EXCL_CHAR, OFS_EXCL }, /* ! */
- { DQUOTE_CHAR, 0 }, /* " */ { OP_CHAR, OFS_POUND }, /* # */
- { ALPHA_CHAR, 0 }, /* $ */ { NL_CHAR, 0 },/* % */
- { OP_CHAR, OFS_BAND }, /* & */ { QUOTE_CHAR, 0 }, /* ' */
- { SEP_CHAR, OPAREN_TOKEN }, /* ( */ { SEP_CHAR, CPAREN_TOKEN }, /* ) */
- { OP_CHAR, OFS_STAR }, /* * */ { OP_CHAR, OFS_PLUS}, /* + */
- { SEP_CHAR, COMMA_TOKEN }, /* , */ { OP_CHAR, OFS_MINUS }, /* - */
- { DOT_CHAR, 0 }, /* . */ { OP_CHAR, OFS_DIV }, /* / */
- { DIGIT_CHAR, 0 }, /* 0 */ { DIGIT_CHAR, 0 }, /* 1 */
- { DIGIT_CHAR, 0 }, /* 2 */ { DIGIT_CHAR, 0 }, /* 3 */
- { DIGIT_CHAR, 0 }, /* 4 */ { DIGIT_CHAR, 0 }, /* 5 */
- { DIGIT_CHAR, 0 }, /* 6 */ { DIGIT_CHAR, 0 }, /* 7 */
- { DIGIT_CHAR, 0 }, /* 8 */ { DIGIT_CHAR, 0 }, /* 9 */
- { SEP_CHAR, COLON_TOKEN }, /* : */ { SEP_CHAR, SEMICOLON_TOKEN }, /* ; */
- { OP_CHAR, OFS_LT }, /* < */ { OP_CHAR, OFS_EQS }, /* = */
- { OP_CHAR, OFS_GT }, /* > */ { BAD_CHAR, 0 }, /* ? */
- { OP_CHAR, OFS_AT}, /* @ */ { ALPHA_CHAR, 0 }, /* A */
- { ALPHA_CHAR, 0 }, /* B */ { ALPHA_CHAR, 0 }, /* C */
- { ALPHA_CHAR, 0 }, /* D */ { ALPHA_CHAR, 0 }, /* E */
- { ALPHA_CHAR, 0 }, /* F */ { ALPHA_CHAR, 0 }, /* G */
- { ALPHA_CHAR, 0 }, /* H */ { ALPHA_CHAR, 0 }, /* I */
- { ALPHA_CHAR, 0 }, /* J */ { ALPHA_CHAR, 0 }, /* K */
- { ALPHA_CHAR, 0 }, /* L */ { ALPHA_CHAR, 0 }, /* M */
- { ALPHA_CHAR, 0 }, /* N */ { ALPHA_CHAR, 0 }, /* O */
- { ALPHA_CHAR, 0 }, /* P */ { ALPHA_CHAR, 0 }, /* Q */
- { ALPHA_CHAR, 0 }, /* R */ { ALPHA_CHAR, 0 }, /* S */
- { ALPHA_CHAR, 0 }, /* T */ { ALPHA_CHAR, 0 }, /* U */
- { ALPHA_CHAR, 0 }, /* V */ { ALPHA_CHAR, 0 }, /* W */
- { ALPHA_CHAR, 0 }, /* X */ { ALPHA_CHAR, 0 }, /* Y */
- { ALPHA_CHAR, 0 }, /* Z */ { SEP_CHAR, OBRACKET_TOKEN }, /* [ */
- { BAD_CHAR, 0 }, /* \ */ { SEP_CHAR, CBRACKET_TOKEN }, /* ] */
- { OP_CHAR, OFS_POW }, /* ^ */ { ALPHA_CHAR, 0 }, /* _ */
- { BAD_CHAR, 0 }, /* ` */ { ALPHA_CHAR, 0 }, /* a */
- { ALPHA_CHAR, 0 }, /* b */ { ALPHA_CHAR, 0 }, /* c */
- { ALPHA_CHAR, 0 }, /* d */ { ALPHA_CHAR, 0 }, /* e */
- { ALPHA_CHAR, 0 }, /* f */ { ALPHA_CHAR, 0 }, /* g */
- { ALPHA_CHAR, 0 }, /* h */ { ALPHA_CHAR, 0 }, /* i */
- { ALPHA_CHAR, 0 }, /* j */ { ALPHA_CHAR, 0 }, /* k */
- { ALPHA_CHAR, 0 }, /* l */ { ALPHA_CHAR, 0 }, /* m */
- { ALPHA_CHAR, 0 }, /* n */ { ALPHA_CHAR, 0 }, /* o */
- { ALPHA_CHAR, 0 }, /* p */ { ALPHA_CHAR, 0 }, /* q */
- { ALPHA_CHAR, 0 }, /* r */ { ALPHA_CHAR, 0 }, /* s */
- { ALPHA_CHAR, 0 }, /* t */ { ALPHA_CHAR, 0 }, /* u */
- { ALPHA_CHAR, 0 }, /* v */ { ALPHA_CHAR, 0 }, /* w */
- { ALPHA_CHAR, 0 }, /* x */ { ALPHA_CHAR, 0 }, /* y */
- { ALPHA_CHAR, 0 }, /* z */ { SEP_CHAR, OBRACE_TOKEN }, /* { */
- { OP_CHAR, OFS_BOR }, /* | */ { SEP_CHAR, CBRACE_TOKEN }, /* } */
- { OP_CHAR, OFS_BNOT }, /* ~ */ { BAD_CHAR, 0 }, /* 0x7f */
-
- { ALPHA_CHAR, 0 }, /* € */ { ALPHA_CHAR, 0 }, /*  */
- { ALPHA_CHAR, 0 }, /* ‚ */ { ALPHA_CHAR, 0 }, /* ƒ */
- { ALPHA_CHAR, 0 }, /* „ */ { ALPHA_CHAR, 0 }, /* … */
- { ALPHA_CHAR, 0 }, /* † */ { ALPHA_CHAR, 0 }, /* ‡ */
- { ALPHA_CHAR, 0 }, /* ˆ */ { ALPHA_CHAR, 0 }, /* ‰ */
- { ALPHA_CHAR, 0 }, /* Š */ { ALPHA_CHAR, 0 }, /* ‹ */
- { ALPHA_CHAR, 0 }, /* Œ */ { ALPHA_CHAR, 0 }, /*  */
- { ALPHA_CHAR, 0 }, /* Ž */ { ALPHA_CHAR, 0 }, /*  */
- { ALPHA_CHAR, 0 }, /*  */ { ALPHA_CHAR, 0 }, /* ‘ */
- { ALPHA_CHAR, 0 }, /* ’ */ { ALPHA_CHAR, 0 }, /* “ */
- { ALPHA_CHAR, 0 }, /* ” */ { ALPHA_CHAR, 0 }, /* • */
- { ALPHA_CHAR, 0 }, /* – */ { ALPHA_CHAR, 0 }, /* — */
- { ALPHA_CHAR, 0 }, /* ˜ */ { ALPHA_CHAR, 0 }, /* ™ */
- { ALPHA_CHAR, 0 }, /* š */ { ALPHA_CHAR, 0 }, /* › */
- { ALPHA_CHAR, 0 }, /* œ */ { ALPHA_CHAR, 0 }, /*  */
- { ALPHA_CHAR, 0 }, /* ž */ { ALPHA_CHAR, 0 }, /* Ÿ */
- { ALPHA_CHAR, 0 }, /*   */ { ALPHA_CHAR, 0 }, /* Ą */
- { ALPHA_CHAR, 0 }, /* ˘ */ { ALPHA_CHAR, 0 }, /* Ł */
- { ALPHA_CHAR, 0 }, /* ¤ */ { ALPHA_CHAR, 0 }, /* Ľ */
- { ALPHA_CHAR, 0 }, /* Ś */ { ALPHA_CHAR, 0 }, /* § */
- { ALPHA_CHAR, 0 }, /* ¨ */ { ALPHA_CHAR, 0 }, /* Š */
- { ALPHA_CHAR, 0 }, /* Ş */ { ALPHA_CHAR, 0 }, /* Ť */
- { ALPHA_CHAR, 0 }, /* Ź */ { ALPHA_CHAR, 0 }, /* ­ */
- { ALPHA_CHAR, 0 }, /* Ž */ { ALPHA_CHAR, 0 }, /* Ż */
- { ALPHA_CHAR, 0 }, /* ° */ { ALPHA_CHAR, 0 }, /* ą */
- { ALPHA_CHAR, 0 }, /* ˛ */ { ALPHA_CHAR, 0 }, /* ł */
- { ALPHA_CHAR, 0 }, /* ´ */ { ALPHA_CHAR, 0 }, /* ľ */
- { ALPHA_CHAR, 0 }, /* ś */ { ALPHA_CHAR, 0 }, /* ˇ */
- { ALPHA_CHAR, 0 }, /* ¸ */ { ALPHA_CHAR, 0 }, /* š */
- { ALPHA_CHAR, 0 }, /* ş */ { ALPHA_CHAR, 0 }, /* ť */
- { ALPHA_CHAR, 0 }, /* ź */ { ALPHA_CHAR, 0 }, /* ˝ */
- { ALPHA_CHAR, 0 }, /* ž */ { ALPHA_CHAR, 0 }, /* ż */
- { ALPHA_CHAR, 0 }, /* Ŕ */ { ALPHA_CHAR, 0 }, /* Á */
- { ALPHA_CHAR, 0 }, /* Â */ { ALPHA_CHAR, 0 }, /* Ă */
- { ALPHA_CHAR, 0 }, /* Ä */ { ALPHA_CHAR, 0 }, /* Ĺ */
- { ALPHA_CHAR, 0 }, /* Ć */ { ALPHA_CHAR, 0 }, /* Ç */
- { ALPHA_CHAR, 0 }, /* Č */ { ALPHA_CHAR, 0 }, /* É */
- { ALPHA_CHAR, 0 }, /* Ę */ { ALPHA_CHAR, 0 }, /* Ë */
- { ALPHA_CHAR, 0 }, /* Ě */ { ALPHA_CHAR, 0 }, /* Í */
- { ALPHA_CHAR, 0 }, /* Î */ { ALPHA_CHAR, 0 }, /* Ď */
- { ALPHA_CHAR, 0 }, /* Đ */ { ALPHA_CHAR, 0 }, /* Ń */
- { ALPHA_CHAR, 0 }, /* Ň */ { ALPHA_CHAR, 0 }, /* Ó */
- { ALPHA_CHAR, 0 }, /* Ô */ { ALPHA_CHAR, 0 }, /* Ő */
- { ALPHA_CHAR, 0 }, /* Ö */ { ALPHA_CHAR, 0 }, /* × */
- { ALPHA_CHAR, 0 }, /* Ř */ { ALPHA_CHAR, 0 }, /* Ů */
- { ALPHA_CHAR, 0 }, /* Ú */ { ALPHA_CHAR, 0 }, /* Ű */
- { ALPHA_CHAR, 0 }, /* Ü */ { ALPHA_CHAR, 0 }, /* Ý */
- { ALPHA_CHAR, 0 }, /* Ţ */ { ALPHA_CHAR, 0 }, /* ß */
- { ALPHA_CHAR, 0 }, /* ŕ */ { ALPHA_CHAR, 0 }, /* á */
- { ALPHA_CHAR, 0 }, /* â */ { ALPHA_CHAR, 0 }, /* ă */
- { ALPHA_CHAR, 0 }, /* ä */ { ALPHA_CHAR, 0 }, /* ĺ */
- { ALPHA_CHAR, 0 }, /* ć */ { ALPHA_CHAR, 0 }, /* ç */
- { ALPHA_CHAR, 0 }, /* č */ { ALPHA_CHAR, 0 }, /* é */
- { ALPHA_CHAR, 0 }, /* ę */ { ALPHA_CHAR, 0 }, /* ë */
- { ALPHA_CHAR, 0 }, /* ě */ { ALPHA_CHAR, 0 }, /* í */
- { ALPHA_CHAR, 0 }, /* î */ { ALPHA_CHAR, 0 }, /* ď */
- { ALPHA_CHAR, 0 }, /* đ */ { ALPHA_CHAR, 0 }, /* ń */
- { ALPHA_CHAR, 0 }, /* ň */ { ALPHA_CHAR, 0 }, /* ó */
- { ALPHA_CHAR, 0 }, /* ô */ { ALPHA_CHAR, 0 }, /* ő */
- { ALPHA_CHAR, 0 }, /* ö */ { ALPHA_CHAR, 0 }, /* ÷ */
- { ALPHA_CHAR, 0 }, /* ř */ { ALPHA_CHAR, 0 }, /* ů */
- { ALPHA_CHAR, 0 }, /* ú */ { ALPHA_CHAR, 0 }, /* ű */
- { ALPHA_CHAR, 0 }, /* ü */ { ALPHA_CHAR, 0 }, /* ý */
- { ALPHA_CHAR, 0 }, /* ţ */ { ALPHA_CHAR, 0 }, /* ˙ */
-};
-
-int _SLcheck_identifier_syntax (char *name)
-{
- unsigned char *p;
-
- p = (unsigned char *) name;
- if (ALPHA_CHAR == Char_Type_Table[*p][0]) while (1)
- {
- unsigned ch;
- unsigned char type;
-
- ch = *++p;
-
- type = Char_Type_Table [ch][0];
- if ((type != ALPHA_CHAR) && (type != DIGIT_CHAR))
- {
- if (ch == 0)
- return 0;
- break;
- }
- }
-
- SLang_verror (SL_SYNTAX_ERROR,
- "Name %s contains an illegal character", name);
- return -1;
-}
-
-static unsigned char prep_get_char (void)
-{
- register unsigned char ch;
-
- if (0 != (ch = *Input_Line_Pointer++))
- return ch;
-
- Input_Line_Pointer--;
- return 0;
-}
-
-static void unget_prep_char (unsigned char ch)
-{
- if ((Input_Line_Pointer != Input_Line)
- && (ch != 0))
- Input_Line_Pointer--;
- /* *Input_Line_Pointer = ch; -- Do not modify the Input_Line */
-}
-
-#include "keywhash.c"
-
-static int get_ident_token (_SLang_Token_Type *tok, unsigned char *s, unsigned int len)
-{
- unsigned char ch;
- unsigned char type;
- Keyword_Table_Type *table;
-
- while (1)
- {
- ch = prep_get_char ();
- type = CHAR_CLASS (ch);
- if ((type != ALPHA_CHAR) && (type != DIGIT_CHAR))
- {
- unget_prep_char (ch);
- break;
- }
- s [len++] = ch;
- }
-
- s[len] = 0;
-
- /* check if keyword */
- table = is_keyword ((char *) s, len);
- if (table != NULL)
- {
- tok->v.s_val = table->name;
- return (tok->type = table->type);
- }
-
- tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
- tok->free_sval_flag = 1;
- return (tok->type = IDENT_TOKEN);
-}
-
-static int get_number_token (_SLang_Token_Type *tok, unsigned char *s, unsigned int len)
-{
- unsigned char ch;
- unsigned char type;
-
- /* Look for pattern [0-9.xX]*([eE][-+]?[digits])?[ijfhul]? */
- while (1)
- {
- ch = prep_get_char ();
-
- type = CHAR_CLASS (ch);
- if ((type != DIGIT_CHAR) && (type != DOT_CHAR))
- {
- if ((ch != 'x') && (ch != 'X'))
- break;
- /* It must be hex */
- do
- {
- if (len == (MAX_TOKEN_LEN - 1))
- goto too_long_return_error;
-
- s[len++] = ch;
- ch = prep_get_char ();
- type = CHAR_CLASS (ch);
- }
- while ((type == DIGIT_CHAR) || (type == ALPHA_CHAR));
- break;
- }
- if (len == (MAX_TOKEN_LEN - 1))
- goto too_long_return_error;
- s [len++] = ch;
- }
-
- /* At this point, type and ch are synchronized */
-
- if ((ch == 'e') || (ch == 'E'))
- {
- if (len == (MAX_TOKEN_LEN - 1))
- goto too_long_return_error;
- s[len++] = ch;
- ch = prep_get_char ();
- if ((ch == '+') || (ch == '-'))
- {
- if (len == (MAX_TOKEN_LEN - 1))
- goto too_long_return_error;
- s[len++] = ch;
- ch = prep_get_char ();
- }
-
- while (DIGIT_CHAR == (type = CHAR_CLASS(ch)))
- {
- if (len == (MAX_TOKEN_LEN - 1))
- goto too_long_return_error;
- s[len++] = ch;
- ch = prep_get_char ();
- }
- }
-
- while (ALPHA_CHAR == type)
- {
- if (len == (MAX_TOKEN_LEN - 1))
- goto too_long_return_error;
- s[len++] = ch;
- ch = prep_get_char ();
- type = CHAR_CLASS(ch);
- }
-
- unget_prep_char (ch);
- s[len] = 0;
-
- switch (SLang_guess_type ((char *) s))
- {
- default:
- tok->v.s_val = (char *) s;
- _SLparse_error ("Not a number", tok, 0);
- return (tok->type = EOF_TOKEN);
-
-#if SLANG_HAS_FLOAT
- case SLANG_FLOAT_TYPE:
- tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
- tok->free_sval_flag = 1;
- return (tok->type = FLOAT_TOKEN);
-
- case SLANG_DOUBLE_TYPE:
- tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
- tok->free_sval_flag = 1;
- return (tok->type = DOUBLE_TOKEN);
-#endif
-#if SLANG_HAS_COMPLEX
- case SLANG_COMPLEX_TYPE:
- tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
- tok->free_sval_flag = 1;
- return (tok->type = COMPLEX_TOKEN);
-#endif
- case SLANG_CHAR_TYPE:
- tok->v.long_val = (char)SLatol (s);
- return tok->type = CHAR_TOKEN;
- case SLANG_UCHAR_TYPE:
- tok->v.long_val = (unsigned char)SLatol (s);
- return tok->type = UCHAR_TOKEN;
- case SLANG_SHORT_TYPE:
- tok->v.long_val = (short)SLatol (s);
- return tok->type = SHORT_TOKEN;
- case SLANG_USHORT_TYPE:
- tok->v.long_val = (unsigned short)SLatoul (s);
- return tok->type = USHORT_TOKEN;
- case SLANG_INT_TYPE:
- tok->v.long_val = (int)SLatol (s);
- return tok->type = INT_TOKEN;
- case SLANG_UINT_TYPE:
- tok->v.long_val = (unsigned int)SLatoul (s);
- return tok->type = UINT_TOKEN;
- case SLANG_LONG_TYPE:
- tok->v.long_val = SLatol (s);
- return tok->type = LONG_TOKEN;
- case SLANG_ULONG_TYPE:
- tok->v.long_val = SLatoul (s);
- return tok->type = ULONG_TOKEN;
- }
-
- too_long_return_error:
- _SLparse_error ("Number too long for buffer", NULL, 0);
- return (tok->type == EOF_TOKEN);
-}
-
-static int get_op_token (_SLang_Token_Type *tok, char ch)
-{
- unsigned int offset;
- char second_char;
- unsigned char type;
- char *name;
-
- /* operators are: + - / * ++ -- += -= = == != > < >= <= | etc..
- * These lex to the longest valid operator token.
- */
-
- offset = CHAR_DATA((unsigned char) ch);
- if (0 == Operators [offset][1])
- {
- name = Operators [offset];
- type = name [3];
- }
- else
- {
- type = EOF_TOKEN;
- name = NULL;
- }
-
- second_char = prep_get_char ();
- do
- {
- if (second_char == Operators[offset][1])
- {
- name = Operators [offset];
- type = name [3];
- break;
- }
- offset++;
- }
- while (ch == Operators[offset][0]);
-
- tok->type = type;
-
- if (type == EOF_TOKEN)
- {
- _SLparse_error ("Operator not supported", NULL, 0);
- return type;
- }
-
- tok->v.s_val = name;
-
- if (name[1] == 0)
- unget_prep_char (second_char);
-
- return type;
-}
-
-/* If this returns non-zero, then it is a binary string */
-static int expand_escaped_string (register char *s,
- register char *t, register char *tmax,
- unsigned int *lenp)
-{
- char *s0;
- int is_binary = 0;
- char ch;
-
- s0 = s;
- while (t < tmax)
- {
- ch = *t++;
- if (ch == '\\')
- {
- t = _SLexpand_escaped_char (t, &ch);
- if (ch == 0) is_binary = 1;
- }
- *s++ = ch;
- }
- *s = 0;
-
- *lenp = (unsigned char) (s - s0);
- return is_binary;
-}
-
-static int get_string_token (_SLang_Token_Type *tok, unsigned char quote_char,
- unsigned char *s)
-{
- unsigned char ch;
- unsigned int len = 0;
- int has_quote = 0;
- int is_binary;
-
- while (1)
- {
- ch = prep_get_char ();
- if (ch == 0)
- {
- _SLparse_error("Expecting quote-character", NULL, 0);
- return (tok->type = EOF_TOKEN);
- }
- if (ch == quote_char) break;
-
- s[len++] = ch;
-
- if (len == (MAX_TOKEN_LEN - 1))
- {
- _SLparse_error ("String too long for buffer", NULL, 0);
- return (tok->type == EOF_TOKEN);
- }
-
- if (ch == '\\')
- {
- has_quote = 1;
- ch = prep_get_char ();
- s[len++] = ch;
- }
- }
-
- s[len] = 0;
-
- if (has_quote)
- is_binary = expand_escaped_string ((char *) s, (char *)s, (char *)s + len, &len);
- else is_binary = 0;
-
- if ('"' == quote_char)
- {
- tok->free_sval_flag = 1;
- if (is_binary)
- {
- tok->v.b_val = SLbstring_create (s, len);
- return tok->type = BSTRING_TOKEN;
- }
- else
- {
- tok->v.s_val = _SLstring_make_hashed_string ((char *)s,
- len,
- &tok->hash);
- tok->free_sval_flag = 1;
- return (tok->type = STRING_TOKEN);
- }
- }
-
- /* else single character */
- if (s[1] != 0)
- {
- _SLparse_error("Single char expected", NULL, 0);
- return (tok->type = EOF_TOKEN);
- }
-
- tok->v.long_val = s[0];
- return (tok->type = UCHAR_TOKEN);
-}
-
-static int extract_token (_SLang_Token_Type *tok, unsigned char ch, unsigned char t)
-{
- unsigned char s [MAX_TOKEN_LEN];
- unsigned int slen;
-
- s[0] = (char) ch;
- slen = 1;
-
- switch (t)
- {
- case ALPHA_CHAR:
- return get_ident_token (tok, s, slen);
-
- case OP_CHAR:
- return get_op_token (tok, ch);
-
- case DIGIT_CHAR:
- return get_number_token (tok, s, slen);
-
- case EXCL_CHAR:
- ch = prep_get_char ();
- s [slen++] = ch;
- t = CHAR_CLASS(ch);
- if (t == ALPHA_CHAR) return get_ident_token (tok, s, slen);
- if (t == OP_CHAR)
- {
- unget_prep_char (ch);
- return get_op_token (tok, '!');
- }
- _SLparse_error("Misplaced !", NULL, 0);
- return -1;
-
- case DOT_CHAR:
- ch = prep_get_char ();
- if (DIGIT_CHAR == CHAR_CLASS(ch))
- {
- s [slen++] = ch;
- return get_number_token (tok, s, slen);
- }
- unget_prep_char (ch);
- return (tok->type = DOT_TOKEN);
-
- case SEP_CHAR:
- return (tok->type = CHAR_DATA(ch));
-
- case DQUOTE_CHAR:
- case QUOTE_CHAR:
- return get_string_token (tok, ch, s);
-
- default:
- _SLparse_error("Invalid character", NULL, 0);
- return (tok->type = EOF_TOKEN);
- }
-}
-
-int _SLget_rpn_token (_SLang_Token_Type *tok)
-{
- unsigned char ch;
-
- tok->v.s_val = "??";
- while ((ch = *Input_Line_Pointer) != 0)
- {
- unsigned char t;
-
- Input_Line_Pointer++;
- if (WHITE_CHAR == (t = CHAR_CLASS(ch)))
- continue;
-
- if (NL_CHAR == t)
- break;
-
- return extract_token (tok, ch, t);
- }
- Input_Line_Pointer = Empty_Line;
- return EOF_TOKEN;
-}
-
-int _SLget_token (_SLang_Token_Type *tok)
-{
- unsigned char ch;
- unsigned char t;
-
- tok->num_refs = 1;
- tok->free_sval_flag = 0;
- tok->v.s_val = "??";
-#if _SLANG_HAS_DEBUG_CODE
- tok->line_number = LLT->line_num;
-#endif
- if (SLang_Error || (Input_Line == NULL))
- return (tok->type = EOF_TOKEN);
-
- while (1)
- {
- ch = *Input_Line_Pointer++;
- if (WHITE_CHAR == (t = CHAR_CLASS (ch)))
- continue;
-
- if (t != NL_CHAR)
- return extract_token (tok, ch, t);
-
- do
- {
- LLT->line_num++;
-#if _SLANG_HAS_DEBUG_CODE
- tok->line_number++;
-#endif
- Input_Line = LLT->read(LLT);
- if ((NULL == Input_Line) || SLang_Error)
- {
- Input_Line_Pointer = Input_Line = NULL;
- return (tok->type = EOF_TOKEN);
- }
- }
- while (0 == SLprep_line_ok(Input_Line, This_SLpp));
-
- Input_Line_Pointer = Input_Line;
- if (*Input_Line_Pointer == '.')
- {
- Input_Line_Pointer++;
- return tok->type = RPN_TOKEN;
- }
- }
-}
-
-static int prep_exists_function (char *line, char comment)
-{
- char buf[MAX_FILE_LINE_LEN], *b, *bmax;
- unsigned char ch;
-
- bmax = buf + (sizeof (buf) - 1);
-
- while (1)
- {
- /* skip whitespace */
- while ((ch = (unsigned char) *line),
- ch && (ch != '\n') && (ch <= ' '))
- line++;
-
- if ((ch <= '\n')
- || (ch == (unsigned char) comment)) break;
-
- b = buf;
- while ((ch = (unsigned char) *line) > ' ')
- {
- if (b < bmax) *b++ = (char) ch;
- line++;
- }
- *b = 0;
-
- if (SLang_is_defined (buf))
- return 1;
- }
-
- return 0;
-}
-
-static int prep_eval_expr (char *expr)
-{
- int ret;
-
- if (0 != SLang_load_string (expr))
- return -1;
- if (-1 == SLang_pop_integer (&ret))
- return -1;
- return (ret != 0);
-}
-
-
-int SLang_load_object (SLang_Load_Type *x)
-{
- SLPreprocess_Type this_pp;
- SLPreprocess_Type *save_this_pp;
- SLang_Load_Type *save_llt;
- char *save_input_line, *save_input_line_ptr;
-#if _SLANG_HAS_DEBUG_CODE
- int save_compile_line_num_info;
-#endif
- int save_auto_declare_variables;
-
- if (SLprep_exists_hook == NULL)
- SLprep_exists_hook = prep_exists_function;
-
- if (_SLprep_eval_hook == NULL)
- _SLprep_eval_hook = prep_eval_expr;
-
- if (-1 == SLprep_open_prep (&this_pp)) return -1;
-
- if (-1 == _SLcompile_push_context (x))
- return -1;
-
-#if _SLANG_HAS_DEBUG_CODE
- save_compile_line_num_info = _SLang_Compile_Line_Num_Info;
-#endif
- save_this_pp = This_SLpp;
- save_input_line = Input_Line;
- save_input_line_ptr = Input_Line_Pointer;
- save_llt = LLT;
- save_auto_declare_variables = _SLang_Auto_Declare_Globals;
-
- This_SLpp = &this_pp;
- Input_Line_Pointer = Input_Line = Empty_Line;
- LLT = x;
-
- x->line_num = 0;
- x->parse_level = 0;
- _SLang_Auto_Declare_Globals = x->auto_declare_globals;
-
-#if _SLANG_HAS_DEBUG_CODE
- _SLang_Compile_Line_Num_Info = Default_Compile_Line_Num_Info;
-#endif
-
- _SLparse_start (x);
- if (SLang_Error)
- do_line_file_error (x->line_num, x->name);
-
- _SLang_Auto_Declare_Globals = save_auto_declare_variables;
-
- if (SLang_Error) SLang_restart (0);
-
- (void) _SLcompile_pop_context ();
-
- Input_Line = save_input_line;
- Input_Line_Pointer = save_input_line_ptr;
- LLT = save_llt;
- This_SLpp = save_this_pp;
-
-#if _SLANG_HAS_DEBUG_CODE
- _SLang_Compile_Line_Num_Info = save_compile_line_num_info;
-#endif
-
- if (SLang_Error) return -1;
- return 0;
-}
-
-SLang_Load_Type *SLallocate_load_type (char *name)
-{
- SLang_Load_Type *x;
-
- if (NULL == (x = (SLang_Load_Type *)SLmalloc (sizeof (SLang_Load_Type))))
- return NULL;
- memset ((char *) x, 0, sizeof (SLang_Load_Type));
-
- if (name == NULL) name = "";
-
- x->name = SLang_create_slstring (name);
- if (x->name == NULL)
- {
- SLfree ((char *) x);
- return NULL;
- }
- return x;
-}
-
-void SLdeallocate_load_type (SLang_Load_Type *x)
-{
- if (x != NULL)
- {
- SLang_free_slstring (x->name);
- SLfree ((char *) x);
- }
-}
-
-typedef struct
-{
- char *string;
- char *ptr;
-}
-String_Client_Data_Type;
-
-static char *read_from_string (SLang_Load_Type *x)
-{
- String_Client_Data_Type *data;
- char *s, *s1, ch;
-
- data = (String_Client_Data_Type *)x->client_data;
- s1 = s = data->ptr;
-
- if (*s == 0)
- return NULL;
-
- while ((ch = *s) != 0)
- {
- s++;
- if (ch == '\n')
- break;
- }
-
- data->ptr = s;
- return s1;
-}
-
-int SLang_load_string (char *string)
-{
- SLang_Load_Type *x;
- String_Client_Data_Type data;
- int ret;
-
- if (string == NULL)
- return -1;
-
- /* Grab a private copy in case loading modifies string */
- if (NULL == (string = SLang_create_slstring (string)))
- return -1;
-
- /* To avoid creating a static data space for every string loaded,
- * all string objects will be regarded as identical. So, identify
- * all of them by ***string***
- */
- if (NULL == (x = SLallocate_load_type ("***string***")))
- {
- SLang_free_slstring (string);
- return -1;
- }
-
- x->client_data = (VOID_STAR) &data;
- x->read = read_from_string;
-
- data.ptr = data.string = string;
- if (-1 == (ret = SLang_load_object (x)))
- SLang_verror (SLang_Error, "called from eval: %s", string);
-
- SLang_free_slstring (string);
- SLdeallocate_load_type (x);
- return ret;
-}
-
-typedef struct
-{
- char *buf;
- FILE *fp;
-}
-File_Client_Data_Type;
-
-char *SLang_User_Prompt;
-static char *read_from_file (SLang_Load_Type *x)
-{
- FILE *fp;
- File_Client_Data_Type *c;
-
- c = (File_Client_Data_Type *)x->client_data;
- fp = c->fp;
-
- if ((fp == stdin) && (SLang_User_Prompt != NULL))
- {
- fputs (SLang_User_Prompt, stdout);
- fflush (stdout);
- }
-
- return fgets (c->buf, MAX_FILE_LINE_LEN, c->fp);
-}
-
-/* Note that file could be freed from Slang during run of this routine
- * so get it and store it !! (e.g., autoloading)
- */
-int (*SLang_Load_File_Hook) (char *);
-int SLang_load_file (char *f)
-{
- File_Client_Data_Type client_data;
- SLang_Load_Type *x;
- char *name, *buf;
- FILE *fp;
-
- if (SLang_Load_File_Hook != NULL)
- return (*SLang_Load_File_Hook) (f);
-
- if (f == NULL) name = "<stdin>"; else name = f;
-
- name = SLang_create_slstring (name);
- if (name == NULL)
- return -1;
-
- if (NULL == (x = SLallocate_load_type (name)))
- {
- SLang_free_slstring (name);
- return -1;
- }
-
- buf = NULL;
-
- if (f != NULL)
- fp = fopen (f, "r");
- else
- fp = stdin;
-
- if (fp == NULL)
- SLang_verror (SL_OBJ_NOPEN, "Unable to open %s", name);
- else if (NULL != (buf = SLmalloc (MAX_FILE_LINE_LEN + 1)))
- {
- client_data.fp = fp;
- client_data.buf = buf;
- x->client_data = (VOID_STAR) &client_data;
- x->read = read_from_file;
-
- (void) SLang_load_object (x);
- }
-
- if ((fp != NULL) && (fp != stdin))
- fclose (fp);
-
- SLfree (buf);
- SLang_free_slstring (name);
- SLdeallocate_load_type (x);
-
- if (SLang_Error)
- return -1;
-
- return 0;
-}
-
-int SLang_guess_type (char *t)
-{
- char *p;
- register char ch;
- int modifier = 0;
-
- if (*t == '-') t++;
- p = t;
-
-#if SLANG_HAS_FLOAT
- if (*p != '.')
- {
-#endif
- modifier = 0;
- while ((*p >= '0') && (*p <= '9')) p++;
- if (t == p) return (SLANG_STRING_TYPE);
- if ((*p == 'x') && (p == t + 1)) /* 0x?? */
- {
- modifier |= 8;
- p++;
- while (ch = *p,
- ((ch >= '0') && (ch <= '9'))
- || (((ch | 0x20) >= 'a') && ((ch | 0x20) <= 'f'))) p++;
- }
-
- /* Now look for UL, LU, UH, HU, L, H modifiers */
- while ((ch = *p) != 0)
- {
- ch |= 0x20;
- if (ch == 'h') modifier |= 1;
- else if (ch == 'l') modifier |= 2;
- else if (ch == 'u') modifier |= 4;
- else break;
- p++;
- }
- if ((1|2) == (modifier & (1|2))) /* hl present */
- return SLANG_STRING_TYPE;
-
- if (ch == 0)
- {
- if ((modifier & 0x7) == 0) return SLANG_INT_TYPE;
- if (modifier & 4)
- {
- if (modifier & 1) return SLANG_USHORT_TYPE;
- if (modifier & 2) return SLANG_ULONG_TYPE;
- return SLANG_UINT_TYPE;
- }
- if (modifier & 1) return SLANG_SHORT_TYPE;
- if (modifier & 2) return SLANG_LONG_TYPE;
- return SLANG_INT_TYPE;
- }
-
- if (modifier) return SLANG_STRING_TYPE;
-#if SLANG_HAS_FLOAT
- }
-
- /* now down to double case */
- if (*p == '.')
- {
- p++;
- while ((*p >= '0') && (*p <= '9')) p++;
- }
- if (*p == 0) return(SLANG_DOUBLE_TYPE);
- if ((*p != 'e') && (*p != 'E'))
- {
-# if SLANG_HAS_COMPLEX
- if (((*p == 'i') || (*p == 'j'))
- && (p[1] == 0))
- return SLANG_COMPLEX_TYPE;
-# endif
- if (((*p | 0x20) == 'f') && (p[1] == 0))
- return SLANG_FLOAT_TYPE;
-
- return SLANG_STRING_TYPE;
- }
-
- p++;
- if ((*p == '-') || (*p == '+')) p++;
- while ((*p >= '0') && (*p <= '9')) p++;
- if (*p != 0)
- {
-# if SLANG_HAS_COMPLEX
- if (((*p == 'i') || (*p == 'j'))
- && (p[1] == 0))
- return SLANG_COMPLEX_TYPE;
-# endif
- if (((*p | 0x20) == 'f') && (p[1] == 0))
- return SLANG_FLOAT_TYPE;
-
- return SLANG_STRING_TYPE;
- }
- return SLANG_DOUBLE_TYPE;
-#else
- return SLANG_STRING_TYPE;
-#endif /* SLANG_HAS_FLOAT */
-}
-
-static int hex_atoul (unsigned char *s, unsigned long *ul)
-{
- register unsigned char ch;
- register unsigned long value;
- register int base;
-
- s++; /* skip the leading 0 */
-
- /* look for 'x' which indicates hex */
- if ((*s | 0x20) == 'x')
- {
- base = 16;
- s++;
- if (*s == 0)
- {
- SLang_Error = SL_SYNTAX_ERROR;
- return -1;
- }
- }
- else base = 8;
-
- value = 0;
- while ((ch = *s++) != 0)
- {
- char ch1 = ch | 0x20;
- switch (ch1)
- {
- default:
- SLang_Error = SL_SYNTAX_ERROR;
- break;
-
- case 'u':
- case 'l':
- case 'h':
- *ul = value;
- return 0;
-
- case '8':
- case '9':
- if (base != 16) SLang_Error = SL_SYNTAX_ERROR;
- /* drop */
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- ch1 -= '0';
- break;
-
- case 'a':
- case 'b':
- case 'c':
- case 'd':
- case 'e':
- case 'f':
- if (base != 16) SLang_Error = SL_SYNTAX_ERROR;
- ch1 = (ch1 - 'a') + 10;
- break;
- }
- value = value * base + ch1;
- }
- *ul = value;
- return 0;
-}
-
-/* Note: These routines do not check integer overflow. I would use the C
- * library functions atol and atoul but some implementations check overflow
- * and some do not. The following implementations provide a consistent
- * behavior.
- */
-unsigned long SLatoul (unsigned char *s)
-{
- int sign;
- unsigned long value;
-
- if (*s == '-') sign = -1;
- else
- {
- sign = 1;
- if (*s == '+') s++;
- }
-
- if (*s == '0')
- {
- if (-1 == hex_atoul (s, &value))
- return (unsigned long) -1;
- }
- else
- {
- while (WHITE_CHAR == CHAR_CLASS(*s))
- s++;
-
- value = 0;
- while (DIGIT_CHAR == CHAR_CLASS(*s))
- {
- value = value * 10 + (unsigned long) (*s - '0');
- s++;
- }
- }
-
- if (sign == -1)
- value = (unsigned long)-1L * value;
-
- return value;
-}
-
-long SLatol (unsigned char *s)
-{
- while (WHITE_CHAR == CHAR_CLASS(*s))
- s++;
-
- if (*s == '-')
- {
- long value = (long) SLatoul (s+1);
- return -value;
- }
- return (long) SLatoul (s);
-}
-
-int SLatoi (unsigned char *s)
-{
- return (int) SLatol (s);
-}
-
-static char *check_byte_compiled_token (char *buf)
-{
- unsigned int len_lo, len_hi, len;
-
- len_lo = (unsigned char) *Input_Line_Pointer++;
- if ((len_lo < 32)
- || ((len_hi = (unsigned char)*Input_Line_Pointer++) < 32)
- || ((len = (len_lo - 32) | ((len_hi - 32) << 7)) >= MAX_TOKEN_LEN))
- {
- SLang_doerror ("Byte compiled file appears corrupt");
- return NULL;
- }
-
- SLMEMCPY (buf, Input_Line_Pointer, len);
- buf += len;
- Input_Line_Pointer += len;
- *buf = 0;
- return buf;
-}
-
-void _SLcompile_byte_compiled (void)
-{
- unsigned char type;
- _SLang_Token_Type tok;
- char buf[MAX_TOKEN_LEN];
- char *ebuf;
- unsigned int len;
-
- memset ((char *) &tok, 0, sizeof (_SLang_Token_Type));
-
- while (SLang_Error == 0)
- {
- top_of_switch:
- type = (unsigned char) *Input_Line_Pointer++;
- switch (type)
- {
- case '\n':
- case 0:
- if (NULL == (Input_Line = LLT->read(LLT)))
- {
- Input_Line_Pointer = Input_Line = NULL;
- return;
- }
- Input_Line_Pointer = Input_Line;
- goto top_of_switch;
-
- case LINE_NUM_TOKEN:
- case CHAR_TOKEN:
- case UCHAR_TOKEN:
- case SHORT_TOKEN:
- case USHORT_TOKEN:
- case INT_TOKEN:
- case UINT_TOKEN:
- case LONG_TOKEN:
- case ULONG_TOKEN:
- if (NULL == check_byte_compiled_token (buf))
- return;
- tok.v.long_val = atol (buf);
- break;
-
- case COMPLEX_TOKEN:
- case FLOAT_TOKEN:
- case DOUBLE_TOKEN:
- if (NULL == check_byte_compiled_token (buf))
- return;
- tok.v.s_val = buf;
- break;
-
- case ESC_STRING_TOKEN:
- if (NULL == (ebuf = check_byte_compiled_token (buf)))
- return;
- tok.v.s_val = buf;
- if (expand_escaped_string (buf, buf, ebuf, &len))
- {
- tok.hash = len;
- type = _BSTRING_TOKEN;
- }
- else
- {
- tok.hash = _SLstring_hash ((unsigned char *)buf, (unsigned char *)buf + len);
- type = STRING_TOKEN;
- }
- break;
-
- case TMP_TOKEN:
- case DEFINE_TOKEN:
- case DEFINE_STATIC_TOKEN:
- case DEFINE_PRIVATE_TOKEN:
- case DEFINE_PUBLIC_TOKEN:
- case DOT_TOKEN:
- case STRING_TOKEN:
- case IDENT_TOKEN:
- case _REF_TOKEN:
- case _DEREF_ASSIGN_TOKEN:
- case _SCALAR_ASSIGN_TOKEN:
- case _SCALAR_PLUSEQS_TOKEN:
- case _SCALAR_MINUSEQS_TOKEN:
- case _SCALAR_TIMESEQS_TOKEN:
- case _SCALAR_DIVEQS_TOKEN:
- case _SCALAR_BOREQS_TOKEN:
- case _SCALAR_BANDEQS_TOKEN:
- case _SCALAR_PLUSPLUS_TOKEN:
- case _SCALAR_POST_PLUSPLUS_TOKEN:
- case _SCALAR_MINUSMINUS_TOKEN:
- case _SCALAR_POST_MINUSMINUS_TOKEN:
- case _STRUCT_ASSIGN_TOKEN:
- case _STRUCT_PLUSEQS_TOKEN:
- case _STRUCT_MINUSEQS_TOKEN:
- case _STRUCT_TIMESEQS_TOKEN:
- case _STRUCT_DIVEQS_TOKEN:
- case _STRUCT_BOREQS_TOKEN:
- case _STRUCT_BANDEQS_TOKEN:
- case _STRUCT_POST_MINUSMINUS_TOKEN:
- case _STRUCT_MINUSMINUS_TOKEN:
- case _STRUCT_POST_PLUSPLUS_TOKEN:
- case _STRUCT_PLUSPLUS_TOKEN:
- if (NULL == (ebuf = check_byte_compiled_token (buf)))
- return;
- tok.v.s_val = buf;
- tok.hash = _SLstring_hash ((unsigned char *)buf, (unsigned char *)ebuf);
- break;
-
- default:
- break;
- }
- tok.type = type;
-
- (*_SLcompile_ptr) (&tok);
- }
-}
-
-static int escape_string (unsigned char *s, unsigned char *smax,
- unsigned char *buf, unsigned char *buf_max,
- int *is_escaped)
-{
- unsigned char ch;
-
- *is_escaped = 0;
- while (buf < buf_max)
- {
- if (s == smax)
- {
- *buf = 0;
- return 0;
- }
-
- ch = *s++;
- switch (ch)
- {
- default:
- *buf++ = ch;
- break;
-
- case 0:
- *buf++ = '\\';
- if (buf < buf_max) *buf++ = 'x';
- if (buf < buf_max) *buf++ = '0';
- if (buf < buf_max) *buf++ = '0';
- *is_escaped = 1;
- break; /* return 0; */
-
- case '\n':
- *buf++ = '\\';
- if (buf < buf_max) *buf++ = 'n';
- *is_escaped = 1;
- break;
-
- case '\r':
- *buf++ = '\\';
- if (buf < buf_max) *buf++ = 'r';
- *is_escaped = 1;
- break;
-
- case 0x1A: /* ^Z */
- *buf++ = '\\';
- if (buf < buf_max) *buf++ = 'x';
- if (buf < buf_max) *buf++ = '1';
- if (buf < buf_max) *buf++ = 'A';
- *is_escaped = 1;
- break;
-
- case '\\':
- *buf++ = ch;
- if (buf < buf_max) *buf++ = ch;
- *is_escaped = 1;
- break;
- }
- }
- _SLparse_error ("String too long to byte-compile", NULL, 0);
- return -1;
-}
-
-static FILE *Byte_Compile_Fp;
-static unsigned int Byte_Compile_Line_Len;
-
-static int bytecomp_write_data (char *buf, unsigned int len)
-{
- char *err = "Write Error";
-
- if ((Byte_Compile_Line_Len + len + 1) >= MAX_FILE_LINE_LEN)
- {
- if (EOF == fputs ("\n", Byte_Compile_Fp))
- {
- SLang_doerror (err);
- return -1;
- }
- Byte_Compile_Line_Len = 0;
- }
-
- if (EOF == fputs (buf, Byte_Compile_Fp))
- {
- SLang_doerror (err);
- return -1;
- }
- Byte_Compile_Line_Len += len;
- return 0;
-}
-
-static void byte_compile_token (_SLang_Token_Type *tok)
-{
- unsigned char buf [MAX_TOKEN_LEN + 4], *buf_max;
- unsigned int len;
- char *b3;
- int is_escaped;
- unsigned char *s;
-
- if (SLang_Error) return;
-
- buf [0] = (unsigned char) tok->type;
- buf [1] = 0;
-
- buf_max = buf + sizeof(buf);
- b3 = (char *) buf + 3;
-
- switch (tok->type)
- {
- case LINE_NUM_TOKEN:
- case CHAR_TOKEN:
- case SHORT_TOKEN:
- case INT_TOKEN:
- case LONG_TOKEN:
- sprintf (b3, "%ld", tok->v.long_val);
- break;
-
- case UCHAR_TOKEN:
- case USHORT_TOKEN:
- case UINT_TOKEN:
- case ULONG_TOKEN:
- sprintf (b3, "%lu", tok->v.long_val);
- break;
-
- case _BSTRING_TOKEN:
- s = (unsigned char *) tok->v.s_val;
- len = (unsigned int) tok->hash;
-
- if (-1 == escape_string (s, s + len,
- (unsigned char *)b3, buf_max,
- &is_escaped))
- return;
-
- buf[0] = ESC_STRING_TOKEN;
- break;
-
- case BSTRING_TOKEN:
- if (NULL == (s = SLbstring_get_pointer (tok->v.b_val, &len)))
- return;
-
- if (-1 == escape_string (s, s + len,
- (unsigned char *)b3, buf_max,
- &is_escaped))
- return;
- buf[0] = ESC_STRING_TOKEN;
- break;
-
- case STRING_TOKEN:
- s = (unsigned char *)tok->v.s_val;
-
- if (-1 == escape_string (s, s + strlen ((char *)s),
- (unsigned char *)b3, buf_max,
- &is_escaped))
- return;
-
- if (is_escaped)
- buf[0] = ESC_STRING_TOKEN;
- break;
-
- /* a _SCALAR_* token is attached to an identifier. */
- case _DEREF_ASSIGN_TOKEN:
- case _SCALAR_ASSIGN_TOKEN:
- case _SCALAR_PLUSEQS_TOKEN:
- case _SCALAR_MINUSEQS_TOKEN:
- case _SCALAR_TIMESEQS_TOKEN:
- case _SCALAR_DIVEQS_TOKEN:
- case _SCALAR_BOREQS_TOKEN:
- case _SCALAR_BANDEQS_TOKEN:
- case _SCALAR_PLUSPLUS_TOKEN:
- case _SCALAR_POST_PLUSPLUS_TOKEN:
- case _SCALAR_MINUSMINUS_TOKEN:
- case _SCALAR_POST_MINUSMINUS_TOKEN:
- case DOT_TOKEN:
- case TMP_TOKEN:
- case DEFINE_TOKEN:
- case DEFINE_STATIC_TOKEN:
- case DEFINE_PRIVATE_TOKEN:
- case DEFINE_PUBLIC_TOKEN:
- case FLOAT_TOKEN:
- case DOUBLE_TOKEN:
- case COMPLEX_TOKEN:
- case IDENT_TOKEN:
- case _REF_TOKEN:
- case _STRUCT_ASSIGN_TOKEN:
- case _STRUCT_PLUSEQS_TOKEN:
- case _STRUCT_MINUSEQS_TOKEN:
- case _STRUCT_TIMESEQS_TOKEN:
- case _STRUCT_DIVEQS_TOKEN:
- case _STRUCT_BOREQS_TOKEN:
- case _STRUCT_BANDEQS_TOKEN:
- case _STRUCT_POST_MINUSMINUS_TOKEN:
- case _STRUCT_MINUSMINUS_TOKEN:
- case _STRUCT_POST_PLUSPLUS_TOKEN:
- case _STRUCT_PLUSPLUS_TOKEN:
- strcpy (b3, tok->v.s_val);
- break;
-
- default:
- b3 = NULL;
- }
-
- if (b3 != NULL)
- {
- len = strlen (b3);
- buf[1] = (unsigned char) ((len & 0x7F) + 32);
- buf[2] = (unsigned char) (((len >> 7) & 0x7F) + 32);
- len += 3;
- }
- else len = 1;
-
- (void) bytecomp_write_data ((char *)buf, len);
-}
-
-int SLang_byte_compile_file (char *name, int method)
-{
- char file [1024];
-
- (void) method;
- if (strlen (name) + 2 >= sizeof (file))
- {
- SLang_verror (SL_INVALID_PARM, "Filename too long");
- return -1;
- }
- sprintf (file, "%sc", name);
- if (NULL == (Byte_Compile_Fp = fopen (file, "w")))
- {
- SLang_verror(SL_OBJ_NOPEN, "%s: unable to open", file);
- return -1;
- }
-
- Byte_Compile_Line_Len = 0;
- if (-1 != bytecomp_write_data (".#", 2))
- {
- _SLcompile_ptr = byte_compile_token;
- (void) SLang_load_file (name);
- _SLcompile_ptr = _SLcompile;
-
- (void) bytecomp_write_data ("\n", 1);
- }
-
- if (EOF == fclose (Byte_Compile_Fp))
- SLang_doerror ("Write Error");
-
- if (SLang_Error)
- {
- SLang_verror (0, "Error processing %s", name);
- return -1;
- }
- return 0;
-}
-
-int SLang_generate_debug_info (int x)
-{
- int y = Default_Compile_Line_Num_Info;
- Default_Compile_Line_Num_Info = x;
- return y;
-}
diff --git a/mdk-stage1/slang/sltypes.c b/mdk-stage1/slang/sltypes.c
deleted file mode 100644
index 05b8741b1..000000000
--- a/mdk-stage1/slang/sltypes.c
+++ /dev/null
@@ -1,966 +0,0 @@
-/* Basic type operations for S-Lang */
-/* Copyright (c) 1992, 1996, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#define SL_APP_WANTS_FOREACH /* for String_Type */
-#include "slang.h"
-#include "_slang.h"
-
-int SLpop_string (char **s) /*{{{*/
-{
- char *sls;
-
- *s = NULL;
-
- if (-1 == SLang_pop_slstring (&sls))
- return -1;
-
- if (NULL == (*s = SLmake_string (sls)))
- {
- SLang_free_slstring (sls);
- return -1;
- }
-
- SLang_free_slstring (sls);
- return 0;
-}
-
-/*}}}*/
-
-int SLang_pop_slstring (char **s) /*{{{*/
-{
- return SLclass_pop_ptr_obj (SLANG_STRING_TYPE, (VOID_STAR *)s);
-}
-
-/*}}}*/
-
-/* if *data != 0, string should be freed upon use. */
-int SLang_pop_string(char **s, int *data) /*{{{*/
-{
- if (SLpop_string (s))
- return -1;
-
- *data = 1;
- return 0;
-}
-
-/*}}}*/
-
-int _SLang_push_slstring (char *s)
-{
- if (0 == SLclass_push_ptr_obj (SLANG_STRING_TYPE, (VOID_STAR)s))
- return 0;
-
- SLang_free_slstring (s);
- return -1;
-}
-
-int _SLpush_alloced_slstring (char *s, unsigned int len)
-{
- if (NULL == (s = _SLcreate_via_alloced_slstring (s, len)))
- return -1;
-
- return _SLang_push_slstring (s);
-}
-
-int SLang_push_string (char *t) /*{{{*/
-{
- if (t == NULL)
- return SLang_push_null ();
-
- if (NULL == (t = SLang_create_slstring (t)))
- return -1;
-
- return _SLang_push_slstring (t);
-}
-
-/*}}}*/
-
-int _SLang_dup_and_push_slstring (char *s)
-{
- if (NULL == (s = _SLstring_dup_slstring (s)))
- return SLang_push_null ();
-
- return _SLang_push_slstring (s);
-}
-
-
-/* This function _always_ frees the malloced string */
-int SLang_push_malloced_string (char *c) /*{{{*/
-{
- int ret;
-
- ret = SLang_push_string (c);
- SLfree (c);
-
- return ret;
-}
-
-/*}}}*/
-
-#if 0
-static int int_int_power (int a, int b)
-{
- int r, s;
-
- if (a == 0) return 0;
- if (b < 0) return 0;
- if (b == 0) return 1;
-
- s = 1;
- if (a < 0)
- {
- if ((b % 2) == 1) s = -1;
- a = -a;
- }
-
- /* FIXME: Priority=low
- * This needs optimized
- */
- r = 1;
- while (b)
- {
- r = r * a;
- b--;
- }
- return r * s;
-}
-#endif
-
-static int
-string_string_bin_op_result (int op, unsigned char a, unsigned char b,
- unsigned char *c)
-{
- (void) a;
- (void) b;
- switch (op)
- {
- default:
- return 0;
-
- case SLANG_PLUS:
- *c = SLANG_STRING_TYPE;
- break;
-
- case SLANG_GT:
- case SLANG_GE:
- case SLANG_LT:
- case SLANG_LE:
- case SLANG_EQ:
- case SLANG_NE:
- *c = SLANG_CHAR_TYPE;
- break;
- }
- return 1;
-}
-
-static int
-string_string_bin_op (int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
- char *ic;
- char **a, **b, **c;
- unsigned int n, n_max;
- unsigned int da, db;
-
- (void) a_type;
- (void) b_type;
-
- if (na == 1) da = 0; else da = 1;
- if (nb == 1) db = 0; else db = 1;
-
- if (na > nb) n_max = na; else n_max = nb;
-
- a = (char **) ap;
- b = (char **) bp;
- for (n = 0; n < n_max; n++)
- {
- if ((*a == NULL) || (*b == NULL))
- {
- SLang_verror (SL_VARIABLE_UNINITIALIZED, "String element[%u] not initialized for binary operation", n);
- return -1;
- }
- a += da; b += db;
- }
-
- a = (char **) ap;
- b = (char **) bp;
- ic = (char *) cp;
- c = NULL;
-
- switch (op)
- {
- case SLANG_DIVIDE:
- case SLANG_MINUS:
- default:
- return 0;
-
- case SLANG_PLUS:
- /* Concat */
- c = (char **) cp;
- for (n = 0; n < n_max; n++)
- {
- if (NULL == (c[n] = SLang_concat_slstrings (*a, *b)))
- goto return_error;
-
- a += da; b += db;
- }
- break;
-
- case SLANG_NE:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (0 != strcmp (*a, *b));
- a += da;
- b += db;
- }
- break;
- case SLANG_GT:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (strcmp (*a, *b) > 0);
- a += da;
- b += db;
- }
- break;
- case SLANG_GE:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (strcmp (*a, *b) >= 0);
- a += da;
- b += db;
- }
- break;
- case SLANG_LT:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (strcmp (*a, *b) < 0);
- a += da;
- b += db;
- }
- break;
- case SLANG_LE:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (strcmp (*a, *b) <= 0);
- a += da;
- b += db;
- }
- break;
- case SLANG_EQ:
- for (n = 0; n < n_max; n++)
- {
- ic [n] = (strcmp (*a, *b) == 0);
- a += da;
- b += db;
- }
- break;
- }
- return 1;
-
- return_error:
- if (c != NULL)
- {
- unsigned int nn;
- for (nn = 0; nn < n; nn++)
- {
- SLang_free_slstring (c[nn]);
- c[nn] = NULL;
- }
- for (nn = n; nn < n_max; nn++)
- c[nn] = NULL;
- }
- return -1;
-}
-
-static void string_destroy (unsigned char unused, VOID_STAR s)
-{
- (void) unused;
- SLang_free_slstring (*(char **) s);
-}
-
-static int string_push (unsigned char unused, VOID_STAR sptr)
-{
- (void) unused;
- return SLang_push_string (*(char **) sptr);
-}
-
-static int string_cmp (unsigned char unused, VOID_STAR ap, VOID_STAR bp, int *c)
-{
- char *a, *b;
- (void) unused;
-
- a = *(char **) ap;
- b = *(char **) bp;
- if (a != b)
- {
- if (a == NULL) *c = -1;
- else if (b == NULL) *c = 1;
- else *c = strcmp (a, b);
- return 0;
- }
- *c = 0;
- return 0;
-}
-
-static int string_to_int (unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp)
-{
- char **s;
- unsigned int i;
- int *b;
-
- (void) a_type;
- (void) b_type;
-
- s = (char **) ap;
- b = (int *) bp;
- for (i = 0; i < na; i++)
- {
- if (s[i] == NULL) b[i] = 0;
- else b[i] = s[i][0];
- }
- return 1;
-}
-
-struct _SLang_Foreach_Context_Type
-{
- char *string;
- unsigned int n;
-};
-
-static SLang_Foreach_Context_Type *
-string_foreach_open (unsigned char type, unsigned int num)
-{
- char *s;
- SLang_Foreach_Context_Type *c;
-
- (void) type;
- if (num != 0)
- {
- SLang_verror (SL_NOT_IMPLEMENTED,
- "'foreach using' form not supported by String_Type");
- SLdo_pop_n (num + 1);
- return NULL;
- }
- if (-1 == SLang_pop_slstring (&s))
- return NULL;
-
- c = (SLang_Foreach_Context_Type *)SLmalloc (sizeof (SLang_Foreach_Context_Type));
- if (c == NULL)
- {
- SLang_free_slstring (s);
- return NULL;
- }
-
- memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
- c->string = s;
-
- return c;
-}
-
-static void string_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- (void) type;
- if (c == NULL) return;
- SLang_free_slstring (c->string);
- SLfree ((char *) c);
-}
-
-static int string_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- char ch;
-
- (void) type;
- ch = c->string[c->n];
- if (ch == 0)
- return 0; /* done */
-
- c->n += 1;
-
- if (-1 == SLclass_push_int_obj (SLANG_INT_TYPE, ch))
- return -1;
-
- return 1;
-}
-
-int _SLstring_list_push (_SLString_List_Type *p)
-{
- unsigned int num;
- int inum;
- SLang_Array_Type *at;
- char **buf;
-
- if ((buf = p->buf) == NULL)
- return SLang_push_null ();
-
- num = p->num;
- inum = (int) num;
-
- if (num == 0) num++;
- if (num != p->max_num)
- {
- if (NULL == (buf = (char **)SLrealloc ((char *) buf, sizeof (char *) * num)))
- {
- _SLstring_list_delete (p);
- return -1;
- }
- p->max_num = num;
- p->buf = buf;
- }
-
- if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, (VOID_STAR) buf, &inum, 1)))
- {
- _SLstring_list_delete (p);
- return -1;
- }
- p->buf = NULL;
- _SLstring_list_delete (p);
- return SLang_push_array (at, 1);
-}
-
-int _SLstring_list_init (_SLString_List_Type *p, unsigned int max_num, unsigned int delta_num)
-{
- if (NULL == (p->buf = (char **) SLmalloc (max_num * sizeof (char *))))
- return -1;
-
- p->max_num = max_num;
- p->num = 0;
- p->delta_num = delta_num;
- return 0;
-}
-
-int _SLstring_list_append (_SLString_List_Type *p, char *s)
-{
- if (s == NULL)
- {
- _SLstring_list_delete (p);
- return -1;
- }
-
- if (p->max_num == p->num)
- {
- char **b;
- unsigned int max_num = p->num + p->delta_num;
- b = (char **)SLrealloc ((char *)p->buf, max_num * sizeof (char *));
- if (b == NULL)
- {
- _SLstring_list_delete (p);
- SLang_free_slstring (s);
- return -1;
- }
- p->buf = b;
- p->max_num = max_num;
- }
-
- p->buf[p->num] = s;
- p->num++;
- return 0;
-}
-
-void _SLstring_list_delete (_SLString_List_Type *p)
-{
- if (p->buf != NULL)
- {
- unsigned int i, imax;
- char **buf = p->buf;
- imax = p->num;
- for (i = 0; i < imax; i++)
- SLang_free_slstring (buf[i]);
- SLfree ((char *)buf);
- p->buf = NULL;
- }
-}
-
-/* Ref type */
-int SLang_pop_ref (SLang_Ref_Type **ref)
-{
- return SLclass_pop_ptr_obj (SLANG_REF_TYPE, (VOID_STAR *)ref);
-}
-
-/* Note: This is ok if ptr is NULL. Some routines rely on this behavior */
-int _SLang_push_ref (int is_global, VOID_STAR ptr)
-{
- SLang_Ref_Type *r;
-
- if (ptr == NULL)
- return SLang_push_null ();
-
- r = (SLang_Ref_Type *) SLmalloc (sizeof (SLang_Ref_Type));
- if (r == NULL) return -1;
-
- r->is_global = is_global;
- r->v.nt = (SLang_Name_Type *) ptr;
-
- if (-1 == SLclass_push_ptr_obj (SLANG_REF_TYPE, (VOID_STAR) r))
- {
- SLfree ((char *) r);
- return -1;
- }
- return 0;
-}
-
-static void ref_destroy (unsigned char type, VOID_STAR ptr)
-{
- (void) type;
- SLfree ((char *) *(SLang_Ref_Type **)ptr);
-}
-
-void SLang_free_ref (SLang_Ref_Type *ref)
-{
- SLfree ((char *) ref);
-}
-
-static int ref_push (unsigned char type, VOID_STAR ptr)
-{
- SLang_Ref_Type *ref;
-
- (void) type;
-
- ref = *(SLang_Ref_Type **) ptr;
-
- if (ref == NULL)
- return SLang_push_null ();
-
- return _SLang_push_ref (ref->is_global, (VOID_STAR) ref->v.nt);
-}
-
-int SLang_assign_to_ref (SLang_Ref_Type *ref, unsigned char type, VOID_STAR v)
-{
- SLang_Object_Type *stkptr;
- SLang_Class_Type *cl;
-
- cl = _SLclass_get_class (type);
-
- /* Use apush since this function is passing ``array'' bytes rather than the
- * address of the data. I need to somehow make this more consistent. To
- * see what I mean, consider:
- *
- * double z[2];
- * char *s = "silly";
- * int i;
- *
- * SLang_assign_to_ref (ref, SLANG_INT_TYPE, &i);
- * SLang_assign_to_ref (ref, SLANG_STRING_TYPE, &s);
- * SLang_assign_to_ref (ref, SLANG_COMPLEX_TYPE, z);
- *
- * That is, all external routines that take a VOID_STAR argument need to
- * be documented such that how the function should be called with the
- * various class_types.
- */
- if (-1 == (*cl->cl_apush) (type, v))
- return -1;
-
- stkptr = _SLStack_Pointer;
- if (0 == _SLang_deref_assign (ref))
- return 0;
-
- if (stkptr != _SLStack_Pointer)
- SLdo_pop ();
-
- return -1;
-}
-
-static char *ref_string (unsigned char type, VOID_STAR ptr)
-{
- SLang_Ref_Type *ref;
-
- (void) type;
- ref = *(SLang_Ref_Type **) ptr;
- if (ref->is_global)
- {
- char *name, *s;
-
- name = ref->v.nt->name;
- if ((name != NULL)
- && (NULL != (s = SLmalloc (strlen(name) + 2))))
- {
- *s = '&';
- strcpy (s + 1, name);
- return s;
- }
-
- return NULL;
- }
- return SLmake_string ("Local Variable Reference");
-}
-
-static int ref_dereference (unsigned char unused, VOID_STAR ptr)
-{
- (void) unused;
- return _SLang_dereference_ref (*(SLang_Ref_Type **) ptr);
-}
-
-static int ref_cmp (unsigned char type, VOID_STAR a, VOID_STAR b, int *c)
-{
- SLang_Ref_Type *ra, *rb;
-
- (void) type;
-
- ra = *(SLang_Ref_Type **)a;
- rb = *(SLang_Ref_Type **)b;
-
- if (ra == NULL)
- {
- if (rb == NULL) *c = 0;
- else *c = -1;
- return 0;
- }
- if (rb == NULL)
- {
- *c = 1;
- return 0;
- }
-
- if (ra->v.nt == rb->v.nt)
- *c = 0;
- else *c = strcmp (ra->v.nt->name, rb->v.nt->name);
- return 0;
-}
-
-
-SLang_Name_Type *SLang_pop_function (void)
-{
- SLang_Ref_Type *ref;
- SLang_Name_Type *f;
-
- if (SLang_peek_at_stack () == SLANG_STRING_TYPE)
- {
- char *name;
-
- if (-1 == SLang_pop_slstring (&name))
- return NULL;
-
- if (NULL == (f = SLang_get_function (name)))
- {
- SLang_verror (SL_UNDEFINED_NAME, "Function %s does not exist", name);
- SLang_free_slstring (name);
- return NULL;
- }
- SLang_free_slstring (name);
- return f;
- }
-
- if (-1 == SLang_pop_ref (&ref))
- return NULL;
-
- f = SLang_get_fun_from_ref (ref);
- SLang_free_ref (ref);
- return f;
-}
-
-/* This is a placeholder for version 2 */
-void SLang_free_function (SLang_Name_Type *f)
-{
- (void) f;
-}
-
-/* NULL type */
-int SLang_push_null (void)
-{
- return SLclass_push_ptr_obj (SLANG_NULL_TYPE, NULL);
-}
-
-int SLang_pop_null (void)
-{
- SLang_Object_Type obj;
- return _SLang_pop_object_of_type (SLANG_NULL_TYPE, &obj, 0);
-}
-
-static int null_push (unsigned char unused, VOID_STAR ptr_unused)
-{
- (void) unused; (void) ptr_unused;
- return SLang_push_null ();
-}
-
-static int null_pop (unsigned char type, VOID_STAR ptr)
-{
- (void) type;
-
- if (-1 == SLang_pop_null ())
- return -1;
-
- *(char **) ptr = NULL;
- return 0;
-}
-
-/* Implement foreach (NULL) using (whatever) to do nothing. This is useful
- * because suppose that X is a list but is NULL in some situations. Then
- * when it is NULL, we want foreach(X) to do nothing.
- */
-static SLang_Foreach_Context_Type *
-null_foreach_open (unsigned char type, unsigned int num)
-{
- (void) type;
- SLdo_pop_n (num + 1);
- return (SLang_Foreach_Context_Type *)1;
-}
-
-static void null_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- (void) type;
- (void) c;
-}
-
-static int null_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
- (void) type;
- (void) c;
- return 0;
-}
-
-static int null_to_bool (unsigned char type, int *t)
-{
- (void) type;
- *t = 0;
- return SLang_pop_null ();
-}
-
-/* AnyType */
-int _SLanytype_typecast (unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp)
-{
- SLang_Class_Type *cl;
- SLang_Any_Type **any;
- unsigned int i;
- unsigned int sizeof_type;
-
- (void) b_type;
-
- any = (SLang_Any_Type **) bp;
-
- cl = _SLclass_get_class (a_type);
- sizeof_type = cl->cl_sizeof_type;
-
- for (i = 0; i < na; i++)
- {
- if ((-1 == (*cl->cl_apush) (a_type, ap))
- || (-1 == SLang_pop_anytype (&any[i])))
- {
- while (i != 0)
- {
- i--;
- SLang_free_anytype (any[i]);
- any[i] = NULL;
- }
- return -1;
- }
- ap = (VOID_STAR)((char *)ap + sizeof_type);
- }
-
- return 1;
-}
-
-int SLang_pop_anytype (SLang_Any_Type **any)
-{
- SLang_Object_Type *obj;
-
- *any = NULL;
-
- if (NULL == (obj = (SLang_Object_Type *) SLmalloc (sizeof (SLang_Object_Type))))
- return -1;
-
- if (-1 == SLang_pop (obj))
- {
- SLfree ((char *) obj);
- return -1;
- }
- *any = (SLang_Any_Type *)obj;
- return 0;
-}
-
-/* This function will result in an object that is represented by the
- * anytype object.
- */
-int SLang_push_anytype (SLang_Any_Type *any)
-{
- return _SLpush_slang_obj ((SLang_Object_Type *)any);
-}
-
-/* After this call, the stack will contain an Any_Type object */
-static int anytype_push (unsigned char type, VOID_STAR ptr)
-{
- SLang_Any_Type *obj;
-
- /* Push the object onto the stack, then pop it back off into our anytype
- * container. That way, any memory managing associated with the type
- * will be performed automatically. Another way to think of it is that
- * pushing an Any_Type onto the stack will create another copy of the
- * object represented by it.
- */
- if (-1 == _SLpush_slang_obj (*(SLang_Object_Type **)ptr))
- return -1;
-
- if (-1 == SLang_pop_anytype (&obj))
- return -1;
-
- /* There is no need to reference count the anytype objects since every
- * push results in a new anytype container.
- */
- if (-1 == SLclass_push_ptr_obj (type, (VOID_STAR) obj))
- {
- SLang_free_anytype (obj);
- return -1;
- }
-
- return 0;
-}
-
-static void anytype_destroy (unsigned char type, VOID_STAR ptr)
-{
- SLang_Object_Type *obj;
-
- (void) type;
- obj = *(SLang_Object_Type **)ptr;
- SLang_free_object (obj);
- SLfree ((char *) obj);
-}
-
-void SLang_free_anytype (SLang_Any_Type *any)
-{
- if (any != NULL)
- anytype_destroy (SLANG_ANY_TYPE, (VOID_STAR) &any);
-}
-
-static int anytype_dereference (unsigned char unused, VOID_STAR ptr)
-{
- (void) unused;
- return _SLpush_slang_obj (*(SLang_Object_Type **) ptr);
-}
-
-/* SLANG_INTP_TYPE */
-static int intp_push (unsigned char unused, VOID_STAR ptr)
-{
- (void) unused;
- return SLclass_push_int_obj (SLANG_INT_TYPE, **(int **)ptr);
-}
-
-static int intp_pop (unsigned char unused, VOID_STAR ptr)
-{
- (void) unused;
- return SLang_pop_integer (*(int **) ptr);
-}
-
-static int undefined_push (unsigned char t, VOID_STAR p)
-{
- (void) t; (void) p;
- if (SLang_Error == 0)
- SLang_Error = SL_VARIABLE_UNINITIALIZED;
- return -1;
-}
-
-int _SLregister_types (void)
-{
- SLang_Class_Type *cl;
-
- /* A good compiler should optimize this code away. */
- if ((sizeof(short) != SIZEOF_SHORT)
- || (sizeof(int) != SIZEOF_INT)
- || (sizeof(long) != SIZEOF_LONG)
- || (sizeof(float) != SIZEOF_FLOAT)
- || (sizeof(double) != SIZEOF_DOUBLE))
- SLang_exit_error ("S-Lang Library not built properly. Fix SIZEOF_* in config.h and recompile");
-
- if (-1 == _SLclass_init ())
- return -1;
-
- /* Undefined Type */
- if (NULL == (cl = SLclass_allocate_class ("Undefined_Type")))
- return -1;
- (void) SLclass_set_push_function (cl, undefined_push);
- (void) SLclass_set_pop_function (cl, undefined_push);
- if (-1 == SLclass_register_class (cl, SLANG_UNDEFINED_TYPE, sizeof (int),
- SLANG_CLASS_TYPE_SCALAR))
- return -1;
- /* Make Void_Type a synonym for Undefined_Type. Note that this does
- * not mean that Void_Type represents SLANG_VOID_TYPE. Void_Type is
- * used by array_map to indicate no array is to be created.
- */
- if (-1 == SLclass_create_synonym ("Void_Type", SLANG_UNDEFINED_TYPE))
- return -1;
-
- if (-1 == _SLarith_register_types ())
- return -1;
-
- /* SLANG_INTP_TYPE */
- if (NULL == (cl = SLclass_allocate_class ("_IntegerP_Type")))
- return -1;
- (void) SLclass_set_push_function (cl, intp_push);
- (void) SLclass_set_pop_function (cl, intp_pop);
- if (-1 == SLclass_register_class (cl, SLANG_INTP_TYPE, sizeof (int),
- SLANG_CLASS_TYPE_SCALAR))
- return -1;
-
- /* String Type */
-
- if (NULL == (cl = SLclass_allocate_class ("String_Type")))
- return -1;
- (void) SLclass_set_destroy_function (cl, string_destroy);
- (void) SLclass_set_push_function (cl, string_push);
- cl->cl_foreach_open = string_foreach_open;
- cl->cl_foreach_close = string_foreach_close;
- cl->cl_foreach = string_foreach;
- cl->cl_cmp = string_cmp;
- if (-1 == SLclass_register_class (cl, SLANG_STRING_TYPE, sizeof (char *),
- SLANG_CLASS_TYPE_PTR))
- return -1;
-
- /* ref Type */
- if (NULL == (cl = SLclass_allocate_class ("Ref_Type")))
- return -1;
- cl->cl_dereference = ref_dereference;
- cl->cl_push = ref_push;
- cl->cl_destroy = ref_destroy;
- cl->cl_string = ref_string;
- cl->cl_cmp = ref_cmp;
- if (-1 == SLclass_register_class (cl, SLANG_REF_TYPE,
- sizeof (SLang_Ref_Type *),
- SLANG_CLASS_TYPE_PTR))
- return -1;
-
- /* NULL Type */
-
- if (NULL == (cl = SLclass_allocate_class ("Null_Type")))
- return -1;
- cl->cl_push = null_push;
- cl->cl_pop = null_pop;
- cl->cl_foreach_open = null_foreach_open;
- cl->cl_foreach_close = null_foreach_close;
- cl->cl_foreach = null_foreach;
- cl->cl_to_bool = null_to_bool;
- if (-1 == SLclass_register_class (cl, SLANG_NULL_TYPE, sizeof (char *),
- SLANG_CLASS_TYPE_SCALAR))
- return -1;
-
- /* AnyType */
- if (NULL == (cl = SLclass_allocate_class ("Any_Type")))
- return -1;
- (void) SLclass_set_push_function (cl, anytype_push);
- (void) SLclass_set_destroy_function (cl, anytype_destroy);
- cl->cl_dereference = anytype_dereference;
- if (-1 == SLclass_register_class (cl, SLANG_ANY_TYPE, sizeof (VOID_STAR),
- SLANG_CLASS_TYPE_PTR))
- return -1;
-
- if (-1 == _SLang_init_bstring ())
- return -1;
-
- if ((-1 == SLclass_add_typecast (SLANG_STRING_TYPE, SLANG_INT_TYPE, string_to_int, 0))
- || (-1 == SLclass_add_binary_op (SLANG_STRING_TYPE, SLANG_STRING_TYPE, string_string_bin_op, string_string_bin_op_result)))
- return -1;
-
- return 0;
-}
-
diff --git a/mdk-stage1/slang/slutty.c b/mdk-stage1/slang/slutty.c
deleted file mode 100644
index 636c1bb90..000000000
--- a/mdk-stage1/slang/slutty.c
+++ /dev/null
@@ -1,596 +0,0 @@
-/* slutty.c --- Unix Low level terminal (tty) functions for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <signal.h>
-/* sequent support thanks to Kenneth Lorber <keni@oasys.dt.navy.mil> */
-/* SYSV (SYSV ISC R3.2 v3.0) provided by iain.lea@erlm.siemens.de */
-
-#if defined (_AIX) && !defined (_ALL_SOURCE)
-# define _ALL_SOURCE /* so NBBY is defined in <sys/types.h> */
-#endif
-
-#include <sys/time.h>
-#include <sys/types.h>
-
-#ifdef SYSV
-# include <fcntl.h>
-# ifndef CRAY
-# include <sys/termio.h>
-# include <sys/stream.h>
-# include <sys/ptem.h>
-# include <sys/tty.h>
-# endif
-#endif
-
-#ifdef __BEOS__
-/* Prototype for select */
-# include <net/socket.h>
-#endif
-
-#include <sys/file.h>
-
-#ifndef sun
-# include <sys/ioctl.h>
-#endif
-
-#ifdef __QNX__
-# include <sys/select.h>
-#endif
-
-#include <sys/stat.h>
-#include <errno.h>
-
-#if defined (_AIX) && !defined (FD_SET)
-# include <sys/select.h> /* for FD_ISSET, FD_SET, FD_ZERO */
-#endif
-
-#ifndef O_RDWR
-# include <fcntl.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-int SLang_TT_Read_FD = -1;
-int SLang_TT_Baud_Rate;
-
-#ifdef HAVE_TERMIOS_H
-# if !defined(HAVE_TCGETATTR) || !defined(HAVE_TCSETATTR)
-# undef HAVE_TERMIOS_H
-# endif
-#endif
-
-#ifndef HAVE_TERMIOS_H
-
-# if !defined(CBREAK) && defined(sun)
-# ifndef BSD_COMP
-# define BSD_COMP 1
-# endif
-# include <sys/ioctl.h>
-# endif
-
-typedef struct
- {
- struct tchars t;
- struct ltchars lt;
- struct sgttyb s;
- }
-TTY_Termio_Type;
-#else
-# include <termios.h>
-typedef struct termios TTY_Termio_Type;
-#endif
-
-static TTY_Termio_Type Old_TTY;
-
-#ifdef HAVE_TERMIOS_H
-typedef struct
-{
- unsigned int key;
- unsigned int value;
-} Baud_Rate_Type;
-
-static Baud_Rate_Type Baud_Rates [] =
-{
-#ifdef B0
- {B0, 0},
-#endif
-#ifdef B50
- {B50, 50},
-#endif
-#ifdef B75
- {B75, 75},
-#endif
-#ifdef B110
- {B110, 110},
-#endif
-#ifdef B134
- {B134, 134},
-#endif
-#ifdef B150
- {B150, 150},
-#endif
-#ifdef B200
- {B200, 200},
-#endif
-#ifdef B300
- {B300, 300},
-#endif
-#ifdef B600
- {B600, 600},
-#endif
-#ifdef B1200
- {B1200, 1200},
-#endif
-#ifdef B1800
- {B1800, 1800},
-#endif
-#ifdef B2400
- {B2400, 2400},
-#endif
-#ifdef B4800
- {B4800, 4800},
-#endif
-#ifdef B9600
- {B9600, 9600},
-#endif
-#ifdef B19200
- {B19200, 19200},
-#endif
-#ifdef B38400
- {B38400, 38400},
-#endif
-#ifdef B57600
- {B57600, 57600},
-#endif
-#ifdef B115200
- {B115200, 115200},
-#endif
-#ifdef B230400
- {B230400, 230400},
-#endif
- {0, 0}
-};
-
-static void
-set_baud_rate (TTY_Termio_Type *tty)
-{
-#ifdef HAVE_CFGETOSPEED
- unsigned int speed;
- Baud_Rate_Type *b, *bmax;
-
- if (SLang_TT_Baud_Rate)
- return; /* already set */
-
- speed = (unsigned int) cfgetospeed (tty);
-
- b = Baud_Rates;
- bmax = b + (sizeof (Baud_Rates)/sizeof(Baud_Rates[0]));
- while (b < bmax)
- {
- if (b->key == speed)
- {
- SLang_TT_Baud_Rate = b->value;
- return;
- }
- b++;
- }
-#else
- (void) tty;
-#endif
-}
-
-#endif /* HAVE_TERMIOS_H */
-
-#ifdef HAVE_TERMIOS_H
-# define GET_TERMIOS(fd, x) tcgetattr(fd, x)
-# define SET_TERMIOS(fd, x) tcsetattr(fd, TCSADRAIN, x)
-#else
-# ifdef TCGETS
-# define GET_TERMIOS(fd, x) ioctl(fd, TCGETS, x)
-# define SET_TERMIOS(fd, x) ioctl(fd, TCSETS, x)
-# else
-# define X(x,m) &(((TTY_Termio_Type *)(x))->m)
-# define GET_TERMIOS(fd, x) \
- ((ioctl(fd, TIOCGETC, X(x,t)) || \
- ioctl(fd, TIOCGLTC, X(x,lt)) || \
- ioctl(fd, TIOCGETP, X(x,s))) ? -1 : 0)
-# define SET_TERMIOS(fd, x) \
- ((ioctl(fd, TIOCSETC, X(x,t)) ||\
- ioctl(fd, TIOCSLTC, X(x,lt)) || \
- ioctl(fd, TIOCSETP, X(x,s))) ? -1 : 0)
-# endif
-#endif
-
-static int TTY_Inited = 0;
-static int TTY_Open = 0;
-
-#ifdef ultrix /* Ultrix gets _POSIX_VDISABLE wrong! */
-# define NULL_VALUE -1
-#else
-# ifdef _POSIX_VDISABLE
-# define NULL_VALUE _POSIX_VDISABLE
-# else
-# define NULL_VALUE 255
-# endif
-#endif
-
-int SLang_init_tty (int abort_char, int no_flow_control, int opost)
-{
- TTY_Termio_Type newtty;
-
- SLsig_block_signals ();
-
- if (TTY_Inited)
- {
- SLsig_unblock_signals ();
- return 0;
- }
-
- TTY_Open = 0;
-
- if ((SLang_TT_Read_FD == -1)
- || (1 != isatty (SLang_TT_Read_FD)))
- {
-#ifdef O_RDWR
-# ifndef __BEOS__ /* I have been told that BEOS will HANG if passed /dev/tty */
- if ((SLang_TT_Read_FD = open("/dev/tty", O_RDWR)) >= 0)
- {
- TTY_Open = 1;
- }
-# endif
-#endif
- if (TTY_Open == 0)
- {
- SLang_TT_Read_FD = fileno (stderr);
- if (1 != isatty (SLang_TT_Read_FD))
- {
- SLang_TT_Read_FD = fileno (stdin);
- if (1 != isatty (SLang_TT_Read_FD))
- {
- fprintf (stderr, "Failed to open terminal.");
- return -1;
- }
- }
- }
- }
-
- SLang_Abort_Char = abort_char;
-
- /* Some systems may not permit signals to be blocked. As a result, the
- * return code must be checked.
- */
- while (-1 == GET_TERMIOS(SLang_TT_Read_FD, &Old_TTY))
- {
- if (errno != EINTR)
- {
- SLsig_unblock_signals ();
- return -1;
- }
- }
-
- while (-1 == GET_TERMIOS(SLang_TT_Read_FD, &newtty))
- {
- if (errno != EINTR)
- {
- SLsig_unblock_signals ();
- return -1;
- }
- }
-
-#ifndef HAVE_TERMIOS_H
- newtty.s.sg_flags &= ~(ECHO);
- newtty.s.sg_flags &= ~(CRMOD);
- /* if (Flow_Control == 0) newtty.s.sg_flags &= ~IXON; */
- newtty.t.t_eofc = 1;
- if (abort_char == -1) SLang_Abort_Char = newtty.t.t_intrc;
- newtty.t.t_intrc = SLang_Abort_Char; /* ^G */
- newtty.t.t_quitc = 255;
- newtty.lt.t_suspc = 255; /* to ignore ^Z */
- newtty.lt.t_dsuspc = 255; /* to ignore ^Y */
- newtty.lt.t_lnextc = 255;
- newtty.s.sg_flags |= CBREAK; /* do I want cbreak or raw????? */
-#else
-
- /* get baud rate */
-
- newtty.c_iflag &= ~(ECHO | INLCR | ICRNL);
-#ifdef ISTRIP
- /* newtty.c_iflag &= ~ISTRIP; */
-#endif
- if (opost == 0) newtty.c_oflag &= ~OPOST;
-
- set_baud_rate (&newtty);
-
- if (no_flow_control) newtty.c_iflag &= ~IXON; else newtty.c_iflag |= IXON;
-
- newtty.c_cc[VEOF] = 1;
- newtty.c_cc[VMIN] = 1;
- newtty.c_cc[VTIME] = 0;
- newtty.c_lflag = ISIG | NOFLSH;
- if (abort_char == -1) SLang_Abort_Char = newtty.c_cc[VINTR];
- newtty.c_cc[VINTR] = SLang_Abort_Char; /* ^G */
- newtty.c_cc[VQUIT] = NULL_VALUE;
- newtty.c_cc[VSUSP] = NULL_VALUE; /* to ignore ^Z */
-#ifdef VDSUSP
- newtty.c_cc[VDSUSP] = NULL_VALUE; /* to ignore ^Y */
-#endif
-#ifdef VLNEXT
- newtty.c_cc[VLNEXT] = NULL_VALUE; /* to ignore ^V ? */
-#endif
-#ifdef VSWTCH
- newtty.c_cc[VSWTCH] = NULL_VALUE; /* to ignore who knows what */
-#endif
-#endif /* NOT HAVE_TERMIOS_H */
-
- while (-1 == SET_TERMIOS(SLang_TT_Read_FD, &newtty))
- {
- if (errno != EINTR)
- {
- SLsig_unblock_signals ();
- return -1;
- }
- }
-
- TTY_Inited = 1;
- SLsig_unblock_signals ();
- return 0;
-}
-
-void SLtty_set_suspend_state (int mode)
-{
- TTY_Termio_Type newtty;
-
- SLsig_block_signals ();
-
- if (TTY_Inited == 0)
- {
- SLsig_unblock_signals ();
- return;
- }
-
- while ((-1 == GET_TERMIOS (SLang_TT_Read_FD, &newtty))
- && (errno == EINTR))
- ;
-
-#ifndef HAVE_TERMIOS_H
- /* I do not know if all systems define the t_dsuspc field */
- if (mode == 0)
- {
- newtty.lt.t_suspc = 255;
- newtty.lt.t_dsuspc = 255;
- }
- else
- {
- newtty.lt.t_suspc = Old_TTY.lt.t_suspc;
- newtty.lt.t_dsuspc = Old_TTY.lt.t_dsuspc;
- }
-#else
- if (mode == 0)
- {
- newtty.c_cc[VSUSP] = NULL_VALUE;
-#ifdef VDSUSP
- newtty.c_cc[VDSUSP] = NULL_VALUE;
-#endif
- }
- else
- {
- newtty.c_cc[VSUSP] = Old_TTY.c_cc[VSUSP];
-#ifdef VDSUSP
- newtty.c_cc[VDSUSP] = Old_TTY.c_cc[VDSUSP];
-#endif
- }
-#endif
-
- while ((-1 == SET_TERMIOS (SLang_TT_Read_FD, &newtty))
- && (errno == EINTR))
- ;
-
- SLsig_unblock_signals ();
-}
-
-void SLang_reset_tty (void)
-{
- SLsig_block_signals ();
-
- if (TTY_Inited == 0)
- {
- SLsig_unblock_signals ();
- return;
- }
-
- while ((-1 == SET_TERMIOS(SLang_TT_Read_FD, &Old_TTY))
- && (errno == EINTR))
- ;
-
- if (TTY_Open)
- {
- while ((-1 == close (SLang_TT_Read_FD))
- && (errno == EINTR))
- ;
-
- TTY_Open = 0;
- SLang_TT_Read_FD = -1;
- }
-
- TTY_Inited = 0;
- SLsig_unblock_signals ();
-}
-
-static void default_sigint (int sig)
-{
- sig = errno; /* use parameter */
-
- SLKeyBoard_Quit = 1;
- if (SLang_Ignore_User_Abort == 0) SLang_Error = SL_USER_BREAK;
- SLsignal_intr (SIGINT, default_sigint);
- errno = sig;
-}
-
-int SLang_set_abort_signal (void (*hand)(int))
-{
- int save_errno = errno;
- SLSig_Fun_Type *f;
-
- if (hand == NULL) hand = default_sigint;
- f = SLsignal_intr (SIGINT, hand);
-
- errno = save_errno;
-
- if (f == (SLSig_Fun_Type *) SIG_ERR)
- return -1;
-
- return 0;
-}
-
-#ifndef FD_SET
-#define FD_SET(fd, tthis) *(tthis) = 1 << (fd)
-#define FD_ZERO(tthis) *(tthis) = 0
-#define FD_ISSET(fd, tthis) (*(tthis) & (1 << fd))
-typedef int fd_set;
-#endif
-
-static fd_set Read_FD_Set;
-
-/* HACK: If > 0, use 1/10 seconds. If < 0, use 1/1000 seconds */
-
-int _SLsys_input_pending(int tsecs)
-{
- struct timeval wait;
- long usecs, secs;
-
- if (TTY_Inited == 0) return -1;
-
- if (tsecs >= 0)
- {
- secs = tsecs / 10;
- usecs = (tsecs % 10) * 100000;
- }
- else
- {
- tsecs = -tsecs;
- secs = tsecs / 1000;
- usecs = (tsecs % 1000) * 1000;
- }
-
- wait.tv_sec = secs;
- wait.tv_usec = usecs;
-
- FD_ZERO(&Read_FD_Set);
- FD_SET(SLang_TT_Read_FD, &Read_FD_Set);
-
- return select(SLang_TT_Read_FD + 1, &Read_FD_Set, NULL, NULL, &wait);
-}
-
-int (*SLang_getkey_intr_hook) (void);
-
-static int handle_interrupt (void)
-{
- if (SLang_getkey_intr_hook != NULL)
- {
- int save_tty_fd = SLang_TT_Read_FD;
-
- if (-1 == (*SLang_getkey_intr_hook) ())
- return -1;
-
- if (save_tty_fd != SLang_TT_Read_FD)
- return -1;
- }
-
- return 0;
-}
-
-unsigned int _SLsys_getkey (void)
-{
- unsigned char c;
-
- if (TTY_Inited == 0)
- {
- int ic = fgetc (stdin);
- if (ic == EOF) return SLANG_GETKEY_ERROR;
- return (unsigned int) ic;
- }
-
- while (1)
- {
- int ret;
-
- if (SLKeyBoard_Quit)
- return SLang_Abort_Char;
-
- if (0 == (ret = _SLsys_input_pending (100)))
- continue;
-
- if (ret != -1)
- break;
-
- if (SLKeyBoard_Quit)
- return SLang_Abort_Char;
-
- if (errno == EINTR)
- {
- if (-1 == handle_interrupt ())
- return SLANG_GETKEY_ERROR;
-
- continue;
- }
-
- break; /* let read handle it */
- }
-
- while (1)
- {
- int status = read(SLang_TT_Read_FD, (char *) &c, 1);
-
- if (status > 0)
- break;
-
- if (status == 0)
- {
- /* We are at the end of a file. Let application handle it. */
- return SLANG_GETKEY_ERROR;
- }
-
- if (errno == EINTR)
- {
- if (-1 == handle_interrupt ())
- return SLANG_GETKEY_ERROR;
-
- if (SLKeyBoard_Quit)
- return SLang_Abort_Char;
-
- continue;
- }
-#ifdef EAGAIN
- if (errno == EAGAIN)
- {
- sleep (1);
- continue;
- }
-#endif
-#ifdef EWOULDBLOCK
- if (errno == EWOULDBLOCK)
- {
- sleep (1);
- continue;
- }
-#endif
-#ifdef EIO
- if (errno == EIO)
- {
- SLang_exit_error ("_SLsys_getkey: EIO error.");
- }
-#endif
- return SLANG_GETKEY_ERROR;
- }
-
- return((unsigned int) c);
-}
-
diff --git a/mdk-stage1/slang/slxstrng.c b/mdk-stage1/slang/slxstrng.c
deleted file mode 100644
index 3f8a4dffa..000000000
--- a/mdk-stage1/slang/slxstrng.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are simple and inefficient. They were designed to work on
- * SunOS when using Electric Fence.
- */
-
-#include "slang.h"
-#include "_slang.h"
-char *SLstrcpy(register char *aa, register char *b)
-{
- char *a = aa;
- while ((*a++ = *b++) != 0);
- return aa;
-}
-
-int SLstrcmp(register char *a, register char *b)
-{
- while (*a && (*a == *b))
- {
- a++;
- b++;
- }
- if (*a) return((unsigned char) *a - (unsigned char) *b);
- else if (*b) return ((unsigned char) *a - (unsigned char) *b);
- else return 0;
-}
-
-char *SLstrncpy(char *a, register char *b,register int n)
-{
- register char *aa = a;
- while ((n > 0) && *b)
- {
- *aa++ = *b++;
- n--;
- }
- while (n-- > 0) *aa++ = 0;
- return (a);
-}
diff --git a/mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2 b/mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2
deleted file mode 100644
index 337b13666..000000000
--- a/mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2
+++ /dev/null
Binary files differ
diff --git a/mdk-stage1/stage1-data/stage1-with-sash.tar.bz2 b/mdk-stage1/stage1-data/stage1-with-sash.tar.bz2
deleted file mode 100644
index 56279ae90..000000000
--- a/mdk-stage1/stage1-data/stage1-with-sash.tar.bz2
+++ /dev/null
Binary files differ
diff --git a/mdk-stage1/stage1-data/stage1.tar.bz2 b/mdk-stage1/stage1-data/stage1.tar.bz2
deleted file mode 100644
index 98e62b362..000000000
--- a/mdk-stage1/stage1-data/stage1.tar.bz2
+++ /dev/null
Binary files differ
diff --git a/mdk-stage1/stage1.c b/mdk-stage1/stage1.c
deleted file mode 100644
index b70cf33a3..000000000
--- a/mdk-stage1/stage1.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000-2001 MandrakeSoft
- *
- * View the homepage: http://people.mandrakesoft.com/~gc/html/stage1.html
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <string.h>
-#include <errno.h>
-#include <ctype.h>
-#include <stdarg.h>
-#include <signal.h>
-
-#include "stage1.h"
-
-#include "log.h"
-#include "probing.h"
-#include "frontend.h"
-#include "modules.h"
-#include "tools.h"
-#include "automatic.h"
-#include "mount.h"
-#include "insmod.h"
-
-#ifdef ENABLE_PCMCIA
-#include "pcmcia_/pcmcia.h"
-#endif
-
-#ifndef DISABLE_CDROM
-#include "cdrom.h"
-#endif
-
-#ifndef DISABLE_NETWORK
-#include "network.h"
-#endif
-
-#ifndef DISABLE_DISK
-#include "disk.h"
-#endif
-
-
-/************************************************************
- * globals */
-
-char * method_name;
-char * stage2_kickstart = NULL;
-
-
-void fatal_error(char *msg)
-{
- printf("FATAL ERROR IN STAGE1: %s\n\nI can't recover from this.\nYou may reboot your system.\n", msg);
- while (1);
-}
-
-
-/************************************************************
- * special frontend functs
- * (the principle is to not pollute frontend code with stage1-specific stuff) */
-
-void stg1_error_message(char *msg, ...)
-{
- va_list args;
- va_start(args, msg);
- log_message("unsetting automatic");
- unset_param(MODE_AUTOMATIC);
- verror_message(msg, args);
- va_end(args);
-}
-
-void stg1_info_message(char *msg, ...)
-{
- va_list args;
- va_start(args, msg);
- if (IS_AUTOMATIC) {
- vlog_message(msg, args);
- return;
- }
- vinfo_message(msg, args);
- va_end(args);
-}
-
-
-/************************************************************
- * spawns a shell on console #2 */
-static void spawn_shell(void)
-{
-#ifdef SPAWN_SHELL
- int fd;
- char * shell_name[] = { "/tmp/sh", NULL };
-
- log_message("spawning a shell");
-
- if (!IS_TESTING) {
- fd = open("/dev/tty2", O_RDWR);
- if (fd == -1) {
- log_message("cannot open /dev/tty2 -- no shell will be provided");
- return;
- }
- else if (access(shell_name[0], X_OK)) {
- log_message("cannot open shell - %s doesn't exist", shell_name[0]);
- return;
- }
-
- if (!fork()) {
- dup2(fd, 0);
- dup2(fd, 1);
- dup2(fd, 2);
-
- close(fd);
- setsid();
- if (ioctl(0, TIOCSCTTY, NULL))
- log_perror("could not set new controlling tty");
-
- execve(shell_name[0], shell_name, grab_env());
- log_message("execve of %s failed: %s", shell_name[0], strerror(errno));
- exit(-1);
- }
-
- close(fd);
- }
-#endif
-}
-
-
-char * interactive_fifo = "/tmp/stage1-fifo";
-static pid_t interactive_pid = 0;
-
-/* spawns my small interactive on console #6 */
-static void spawn_interactive(void)
-{
-#ifdef SPAWN_INTERACTIVE
- int fd;
- char * dev = "/dev/tty6";
-
- printf("spawning my interactive on %s\n", dev);
-
- if (!IS_TESTING) {
- fd = open(dev, O_RDWR);
- if (fd == -1) {
- printf("cannot open %s -- no interactive\n", dev);
- return;
- }
-
- if (mkfifo(interactive_fifo, O_RDWR)) {
- printf("cannot create fifo -- no interactive\n");
- return;
- }
-
- if (!(interactive_pid = fork())) {
- int fif_out;
-
- dup2(fd, 0);
- dup2(fd, 1);
- dup2(fd, 2);
-
- close(fd);
- setsid();
- if (ioctl(0, TIOCSCTTY, NULL))
- perror("could not set new controlling tty");
-
- fif_out = open(interactive_fifo, O_WRONLY);
- printf("Please enter your command (availables: [+,-] [rescue,expert]).\n");
-
- while (1) {
- char s[50];
- int i = 0;
- printf("? ");
- fflush(stdout);
- read(0, &(s[i++]), 1);
- fcntl(0, F_SETFL, O_NONBLOCK);
- while (read(0, &(s[i++]), 1) > 0 && i < sizeof(s));
- fcntl(0, F_SETFL, 0);
- write(fif_out, s, i-2);
- printf("Ok.\n");
- }
- }
-
- close(fd);
- }
-#endif
-}
-
-
-/************************************************************
- */
-
-static void expert_third_party_modules(void)
-{
- enum return_type results;
- char * floppy_mount_location = "/tmp/floppy";
- char ** modules;
- char final_name[500];
- char * choice;
- int rc;
- char * questions[] = { "Options", NULL };
- static char ** answers = NULL;
-
- results = ask_yes_no("If you want to insert third-party kernel modules, insert "
- "a Linux (ext2fs) formatted floppy containing the modules and confirm. Otherwise, select \"no\".");;
- if (results != RETURN_OK)
- return;
-
- my_insmod("floppy", ANY_DRIVER_TYPE, NULL);
-
- if (my_mount("/dev/fd0", floppy_mount_location, "ext2", 0) == -1) {
- stg1_error_message("I can't find a Linux ext2 floppy in first floppy drive.");
- return expert_third_party_modules();
- }
-
- modules = list_directory(floppy_mount_location);
-
- if (!modules || !*modules) {
- stg1_error_message("No modules found on floppy disk.");
- umount(floppy_mount_location);
- return expert_third_party_modules();
- }
-
- results = ask_from_list("Which driver would you like to insmod?", modules, &choice);
- if (results != RETURN_OK) {
- umount(floppy_mount_location);
- return;
- }
-
- sprintf(final_name, "%s/%s", floppy_mount_location, choice);
-
- results = ask_from_entries("Please enter the options:", questions, &answers, 24, NULL);
- if (results != RETURN_OK) {
- umount(floppy_mount_location);
- return expert_third_party_modules();
- }
-
- rc = insmod_call(final_name, answers[0]);
- umount(floppy_mount_location);
-
- if (rc) {
- log_message("\tfailed");
- stg1_error_message("Insmod failed.");
- }
-
- return expert_third_party_modules();
-}
-
-
-#ifdef ENABLE_PCMCIA
-static void handle_pcmcia(char ** pcmcia_adapter)
-{
- char buf[50];
- int fd = open("/proc/version", O_RDONLY);
- int size;
- if (fd == -1)
- fatal_error("could not open /proc/version");
- size = read(fd, buf, sizeof(buf));
- buf[size-1] = '\0'; // -1 to eat the \n
- close(fd);
- buf[17] = '\0'; // enough to extract `2.2'
- if (ptr_begins_static_str(buf+14, "2.2")) {
- stg1_error_message("We now use kernel pcmcia support and this won't work with a 2.2 kernel.");
- return;
- }
-
- *pcmcia_adapter = pcmcia_probe();
- if (!*pcmcia_adapter) {
- log_message("no pcmcia adapter found");
- return;
- }
- my_insmod("pcmcia_core", ANY_DRIVER_TYPE, NULL);
- my_insmod(*pcmcia_adapter, ANY_DRIVER_TYPE, NULL);
- my_insmod("ds", ANY_DRIVER_TYPE, NULL);
-
- /* call to cardmgr takes time, let's use the wait message */
- wait_message("Enabling PCMCIA extension cards...");
- log_message("cardmgr rc: %d", cardmgr_call());
- remove_wait_message();
-
- if (IS_EXPERT)
- expert_third_party_modules();
-}
-#endif
-
-
-/************************************************************
- */
-
-static enum return_type method_select_and_prepare(void)
-{
- enum return_type results;
- char * choice;
- char * means[10], * means_auto[10];
- int i;
-
-#ifndef DISABLE_DISK
- char * disk_install = "Hard disk"; char * disk_install_auto = "disk";
-#endif
-#ifndef DISABLE_CDROM
- char * cdrom_install = "CDROM drive"; char * cdrom_install_auto = "cdrom";
-#endif
-#ifndef DISABLE_NETWORK
- char * network_nfs_install = "NFS server"; char * network_nfs_install_auto = "nfs";
- char * network_ftp_install = "FTP server"; char * network_ftp_install_auto = "ftp";
- char * network_http_install = "HTTP server"; char * network_http_install_auto = "http";
-#endif
-
- i = 0;
-#ifndef DISABLE_NETWORK
- means[i] = network_nfs_install; means_auto[i++] = network_nfs_install_auto;
- means[i] = network_ftp_install; means_auto[i++] = network_ftp_install_auto;
- means[i] = network_http_install; means_auto[i++] = network_http_install_auto;
-#endif
-#ifndef DISABLE_CDROM
- means[i] = cdrom_install; means_auto[i++] = cdrom_install_auto;
-#endif
-#ifndef DISABLE_DISK
- means[i] = disk_install; means_auto[i++] = disk_install_auto;
-#endif
- means[i] = NULL;
-
- results = ask_from_list_auto("Please choose the installation method.", means, &choice, "method", means_auto);
-
- if (results != RETURN_OK)
- return method_select_and_prepare();
-
- results = RETURN_ERROR;
-
-#ifndef DISABLE_CDROM
- if (!strcmp(choice, cdrom_install))
- results = cdrom_prepare();
-#endif
-
-#ifndef DISABLE_DISK
- if (!strcmp(choice, disk_install))
- results = disk_prepare();
-#endif
-
-#ifndef DISABLE_NETWORK
- if (!strcmp(choice, network_nfs_install))
- results = nfs_prepare();
-
- if (!strcmp(choice, network_ftp_install))
- results = ftp_prepare();
-
- if (!strcmp(choice, network_http_install))
- results = http_prepare();
-#endif
-
- if (results != RETURN_OK)
- return method_select_and_prepare();
-
- return RETURN_OK;
-}
-
-
-int main(int argc __attribute__ ((unused)), char **argv __attribute__ ((unused)), char **env)
-{
- enum return_type ret;
- char ** argptr;
- char * stage2_args[30];
-#ifdef ENABLE_PCMCIA
- char * pcmcia_adapter = NULL;
-#endif
-
- if (getpid() > 50)
- set_param(MODE_TESTING);
-
- spawn_interactive();
-
- open_log();
- log_message("welcome to the " DISTRIB_NAME " install (mdk-stage1, version " VERSION " built " __DATE__ " " __TIME__")");
- process_cmdline();
- handle_env(env);
- spawn_shell();
- init_modules_insmoding();
- init_frontend("Welcome to " DISTRIB_NAME " (" VERSION ") " __DATE__ " " __TIME__);
-
- if (IS_EXPERT)
- expert_third_party_modules();
-
- if (IS_UPDATEMODULES)
- update_modules();
-
-#ifdef ENABLE_PCMCIA
- handle_pcmcia(&pcmcia_adapter);
-#endif
-
- if (IS_CHANGEDISK)
- stg1_info_message("You are starting the installation with an alternate booting method. "
- "Please change your disk, and insert the Installation disk.");
-
- if (IS_RESCUE && total_memory() < MEM_LIMIT_RESCUE) {
- stg1_error_message("You are starting the rescue with a low memory configuration. "
- "Our experience shows that your system may crash at any point "
- "or lock up for no apparent reason. Continue at "
- "your own risk. Alternatively, you may reboot your system now.");
- }
-
- ret = method_select_and_prepare();
-
- finish_frontend();
- close_log();
-
- if (ret != RETURN_OK)
- fatal_error("could not select an installation method");
-
- if (!IS_RAMDISK) {
- if (symlink(IMAGE_LOCATION LIVE_LOCATION, STAGE2_LOCATION) != 0) {
- printf("symlink from " IMAGE_LOCATION LIVE_LOCATION " to " STAGE2_LOCATION " failed");
- fatal_error(strerror(errno));
- }
- }
-
- if (interactive_pid != 0)
- kill(interactive_pid, 9);
-
- if (IS_RESCUE)
- return 66;
- if (IS_TESTING)
- return 0;
-
- argptr = stage2_args;
- *argptr++ = "/usr/bin/runinstall2";
- *argptr++ = "--method";
- *argptr++ = method_name;
-#ifdef ENABLE_PCMCIA
- if (pcmcia_adapter) {
- *argptr++ = "--pcmcia";
- *argptr++ = pcmcia_adapter;
- }
-#endif
- if (disable_modules)
- *argptr++ = "--blank";
- if (stage2_kickstart) {
- *argptr++ = "--kickstart";
- *argptr++ = stage2_kickstart;
- }
- *argptr++ = NULL;
-
- execve(stage2_args[0], stage2_args, grab_env());
-
- printf("error in exec of stage2 :-(\n");
- fatal_error(strerror(errno));
-
- return 0; /* shut up compiler (we can't get here anyway!) */
-}
diff --git a/mdk-stage1/stage1.h b/mdk-stage1/stage1.h
deleted file mode 100644
index f92c45c41..000000000
--- a/mdk-stage1/stage1.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#ifndef _STAGE1_H_
-#define _STAGE1_H_
-
-#include "config-stage1.h"
-#include "tools.h"
-
-
-/* Some global stuff */
-
-extern char * method_name;
-extern char * interactive_fifo;
-extern char * stage2_kickstart;
-
-#define MODE_TESTING (1 << 0)
-#define MODE_EXPERT (1 << 1)
-#define MODE_RESCUE (1 << 3)
-#define MODE_AUTOMATIC (1 << 4)
-#define MODE_SPECIAL_STAGE2 (1 << 8)
-#define MODE_RAMDISK (1 << 9)
-#define MODE_CHANGEDISK (1 << 10)
-#define MODE_UPDATEMODULES (1 << 11)
-
-#define IS_TESTING (get_param(MODE_TESTING))
-#define IS_EXPERT (get_param(MODE_EXPERT))
-#define IS_RESCUE (get_param(MODE_RESCUE))
-#define IS_AUTOMATIC (get_param(MODE_AUTOMATIC))
-#define IS_SPECIAL_STAGE2 (get_param(MODE_SPECIAL_STAGE2))
-#define IS_RAMDISK (get_param(MODE_RAMDISK))
-#define IS_CHANGEDISK (get_param(MODE_CHANGEDISK))
-#define IS_UPDATEMODULES (get_param(MODE_UPDATEMODULES))
-
-void fatal_error(char *msg) __attribute__ ((noreturn));
-
-
-void stg1_error_message(char *msg, ...) __attribute__ ((format (printf, 1, 2)));
-void stg1_info_message(char *msg, ...) __attribute__ ((format (printf, 1, 2)));
-
-#endif
diff --git a/mdk-stage1/stdio-frontend.c b/mdk-stage1/stdio-frontend.c
deleted file mode 100644
index 83e8fd76d..000000000
--- a/mdk-stage1/stdio-frontend.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-
-/*
- * Each different frontend must implement all functions defined in frontend.h
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <termios.h>
-
-#include "frontend.h"
-
-
-void init_frontend(char * welcome_msg)
-{
- printf(welcome_msg);
- printf("\n");
-}
-
-
-void finish_frontend(void)
-{
-}
-
-static void get_any_response(void)
-{
- unsigned char t;
- printf("\n\t(press <enter> to proceed)");
- fflush(stdout);
- read(0, &t, 1);
- fcntl(0, F_SETFL, O_NONBLOCK);
- while (read(0, &t, 1) > 0);
- fcntl(0, F_SETFL, 0);
-}
-
-static int get_int_response(void)
-{
- char s[50];
- int j = 0, i = 0; /* (0) tied to Cancel */
- fflush(stdout);
- read(0, &(s[i++]), 1);
- fcntl(0, F_SETFL, O_NONBLOCK);
- do {
- int v = s[i-1];
- if (v >= '0' && v <= '9')
- j = j*10 + (v - '0');
- } while (read(0, &(s[i++]), 1) > 0 && i < sizeof(s));
- fcntl(0, F_SETFL, 0);
- return j;
-}
-
-static char * get_string_response(char * initial_string)
-{
- /* I won't use a scanf/%s since I also want the null string to be accepted -- also, I want the initial_string */
- char s[500];
- int i = 0;
- char buf[10];
- int b_index = 0;
- char b;
-
- struct termios t;
-
- memset(s, '\0', sizeof(s));
-
- if (initial_string) {
- printf(initial_string);
- strcpy(s, initial_string);
- i = strlen(s);
- }
-
- /* from ncurses/tinfo/lib_raw.c:(cbreak) */
- tcgetattr(0, &t);
- t.c_lflag &= ~ICANON;
- t.c_lflag |= ISIG;
- t.c_lflag &= ~ECHO;
- t.c_iflag &= ~ICRNL;
- t.c_cc[VMIN] = 1;
- t.c_cc[VTIME] = 0;
- tcsetattr(0, TCSADRAIN, &t);
-
- fflush(stdout);
-
- fcntl(0, F_SETFL, O_NONBLOCK);
-
- while (1) {
- if (read(0, &b, 1) > 0) {
- if (b_index == 1) {
- if (b == 91) {
- buf[b_index] = b;
- b_index++;
- continue;
- }
- else
- b_index = 0;
- }
- if (b_index == 2) {
- if (b == 67) {
- if (s[i] != '\0') {
- printf("\033[C");
- i++;
- }
- }
- if (b == 68) {
- if (i > 0) {
- printf("\033[D");
- i--;
- }
- }
- b_index = 0;
- continue;
- }
-
- if (b == 13)
- break;
- if (b == 127) {
- if (i > 0) {
- printf("\033[D");
- printf(" ");
- printf("\033[D");
- if (s[i] == '\0')
- s[i-1] = '\0';
- else
- s[i-1] = ' ';
- i--;
- }
- } else if (b == 27) {
- buf[b_index] = b;
- b_index++;
- } else {
- printf("%c", b);
- s[i] = b;
- i++;
- }
- }
- }
-
- t.c_lflag |= ICANON;
- t.c_lflag |= ECHO;
- t.c_iflag |= ICRNL;
- tcsetattr(0, TCSADRAIN, &t);
-
- fcntl(0, F_SETFL, 0);
-
- printf("\n");
- return strdup(s);
-}
-
-static void blocking_msg(char *type, char *fmt, va_list ap)
-{
- printf(type);
- vprintf(fmt, ap);
- get_any_response();
-}
-
-void verror_message(char *msg, va_list ap)
-{
- blocking_msg("> Error! ", msg, ap);
-}
-
-void vinfo_message(char *msg, va_list ap)
-{
- blocking_msg("> Notice: ", msg, ap);
-}
-
-void vwait_message(char *msg, va_list ap)
-{
- printf("Please wait: ");
- vprintf(msg, ap);
- fflush(stdout);
-}
-
-void remove_wait_message(void)
-{
- printf("\n");
-}
-
-
-static int size_progress;
-static int actually_drawn;
-#define PROGRESS_SIZE 45
-void init_progression(char *msg, int size)
-{
- int i;
- size_progress = size;
- printf("%s ", msg);
- if (size) {
- actually_drawn = 0;
- for (i=0; i<PROGRESS_SIZE; i++)
- printf(".");
- printf("]\033[G%s [", msg); /* only works on ANSI-compatibles */
- fflush(stdout);
- } else
- printf("\n");
-}
-
-void update_progression(int current_size)
-{
- if (size_progress) {
- if (current_size > size_progress)
- current_size = size_progress;
- while ((int)((current_size*PROGRESS_SIZE)/size_progress) > actually_drawn) {
- printf("*");
- actually_drawn++;
- }
- } else
- printf("\033[GStatus: [%8d] bytes loaded...", current_size);
-
- fflush(stdout);
-}
-
-void end_progression(void)
-{
- if (size_progress) {
- update_progression(size_progress);
- printf("]\n");
- } else
- printf(" done.\n");
-}
-
-
-enum return_type ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice)
-{
- int justify_number = 1;
- void print_choice_number(int i) {
- char tmp[500];
- snprintf(tmp, sizeof(tmp), "[%%%dd]", justify_number);
- printf(tmp, i);
- }
- char ** sav_elems = elems;
- int i = 1;
- int j = 0;
-
- while (elems && *elems) {
- elems++;
- i++;
- }
- if (i >= 10)
- justify_number = 2;
-
- elems = sav_elems;
- i = 1;
-
- printf("> %s\n", msg);
- print_choice_number(0);
- printf(" Cancel");
-
- while (elems && *elems) {
- if (elems_comments && *elems_comments) {
- printf("\n");
- print_choice_number(i);
- printf(" %s (%s)", *elems, *elems_comments);
- j = 0;
- } else {
- if (j == 0)
- printf("\n");
- print_choice_number(i);
- printf(" %-14s ", *elems);
- j++;
- }
- if (j == 4)
- j = 0;
-
- if (elems_comments)
- elems_comments++;
- i++;
- elems++;
- }
-
- printf("\n? ");
-
- j = get_int_response();
-
- if (j == 0)
- return RETURN_BACK;
-
- if (j >= 1 && j <= i) {
- *choice = strdup(sav_elems[j-1]);
- return RETURN_OK;
- }
-
- return RETURN_ERROR;
-}
-
-
-enum return_type ask_from_list(char *msg, char ** elems, char ** choice)
-{
- return ask_from_list_comments(msg, elems, NULL, choice);
-}
-
-
-enum return_type ask_yes_no(char *msg)
-{
- int j;
-
- printf("> %s\n[0] Yes [1] No [2] Back\n? ", msg);
-
- j = get_int_response();
-
- if (j == 0)
- return RETURN_OK;
- else if (j == 2)
- return RETURN_BACK;
- else return RETURN_ERROR;
-}
-
-
-enum return_type ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings))
-{
- int j, i = 0;
- char ** already_answers = NULL;
-
- printf("> %s\n", msg);
-
- while (questions && *questions) {
- printf("(%c) %s\n", i + 'a', *questions);
- i++;
- questions++;
- }
-
- if (*answers == NULL)
- *answers = (char **) malloc(sizeof(char *) * i);
- else
- already_answers = *answers;
-
- while (1) {
- int r;
- for (j = 0 ; j < i ; j++) {
- printf("(%c) ? ", j + 'a');
- if (already_answers && *already_answers) {
- (*answers)[j] = get_string_response(*already_answers);
- already_answers++;
- } else
- (*answers)[j] = get_string_response(NULL);
-
- }
- printf("[0] Cancel [1] Accept [2] Re-enter answers\n? ");
- r = get_int_response();
- if (r == 0)
- return RETURN_BACK;
- if (r == 1)
- return RETURN_OK;
- }
-}
-
-
-void suspend_to_console(void) {}
-void resume_from_suspend(void) {}
diff --git a/mdk-stage1/tools.c b/mdk-stage1/tools.c
deleted file mode 100644
index e5d37f28b..000000000
--- a/mdk-stage1/tools.c
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <ctype.h>
-#include <stdio.h>
-#include <dirent.h>
-#include <sys/types.h>
-#include <bzlib.h>
-#include <sys/mount.h>
-#include <sys/poll.h>
-#include "stage1.h"
-#include "log.h"
-#include "mount.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "tools.h"
-
-
-static struct param_elem params[50];
-static int param_number = 0;
-
-void process_cmdline(void)
-{
- char buf[512];
- int fd, size, i;
-
- log_message("opening /proc/cmdline... ");
-
- if ((fd = open("/proc/cmdline", O_RDONLY)) == -1)
- fatal_error("could not open /proc/cmdline");
-
- size = read(fd, buf, sizeof(buf));
- buf[size-1] = '\0'; // -1 to eat the \n
- close(fd);
-
- log_message("\t%s", buf);
-
- i = 0;
- while (buf[i] != '\0') {
- char *name, *value = NULL;
- int j = i;
- while (buf[i] != ' ' && buf[i] != '=' && buf[i] != '\0')
- i++;
- if (i == j) {
- i++;
- continue;
- }
- name = memdup(&buf[j], i-j + 1);
- name[i-j] = '\0';
-
- if (buf[i] == '=') {
- int k = i+1;
- i++;
- while (buf[i] != ' ' && buf[i] != '\0')
- i++;
- value = memdup(&buf[k], i-k + 1);
- value[i-k] = '\0';
- }
-
- params[param_number].name = name;
- params[param_number].value = value;
- param_number++;
- if (!strcmp(name, "expert")) set_param(MODE_EXPERT);
- if (!strcmp(name, "changedisk")) set_param(MODE_CHANGEDISK);
- if (!strcmp(name, "updatemodules")) set_param(MODE_UPDATEMODULES);
- if (!strcmp(name, "rescue")) set_param(MODE_RESCUE);
- if (!strcmp(name, "special_stage2")) set_param(MODE_SPECIAL_STAGE2);
- if (!strcmp(name, "automatic")) {
- set_param(MODE_AUTOMATIC);
- grab_automatic_params(value);
- }
- if (buf[i] == '\0')
- break;
- i++;
- }
-
- log_message("\tgot %d args", param_number);
-}
-
-
-int stage1_mode = 0;
-
-int get_param(int i)
-{
-#ifdef SPAWN_INTERACTIVE
- static int fd = 0;
- char buf[5000];
- char * ptr;
- int nb;
-
- if (fd <= 0) {
- fd = open(interactive_fifo, O_RDONLY);
- if (fd == -1)
- return (stage1_mode & i);
- fcntl(fd, F_SETFL, O_NONBLOCK);
- }
-
- if (fd > 0) {
- if ((nb = read(fd, buf, sizeof(buf))) > 0) {
- buf[nb] = '\0';
- ptr = buf;
- while ((ptr = strstr(ptr, "+ "))) {
- if (!strncmp(ptr+2, "expert", 6)) set_param(MODE_EXPERT);
- if (!strncmp(ptr+2, "rescue", 6)) set_param(MODE_RESCUE);
- ptr++;
- }
- ptr = buf;
- while ((ptr = strstr(ptr, "- "))) {
- if (!strncmp(ptr+2, "expert", 6)) unset_param(MODE_EXPERT);
- if (!strncmp(ptr+2, "rescue", 6)) unset_param(MODE_RESCUE);
- ptr++;
- }
- }
- }
-#endif
-
- return (stage1_mode & i);
-}
-
-char * get_param_valued(char *param_name)
-{
- int i;
- for (i = 0; i < param_number ; i++)
- if (!strcmp(params[i].name, param_name))
- return params[i].value;
-
- return NULL;
-}
-
-void set_param_valued(char *param_name, char *param_value)
-{
- params[param_number].name = param_name;
- params[param_number].value = param_value;
- param_number++;
-}
-
-void set_param(int i)
-{
- stage1_mode |= i;
- if (i == MODE_RESCUE) {
- set_param_valued("special_stage2", "rescue");
- set_param(MODE_SPECIAL_STAGE2);
- }
-}
-
-void unset_param(int i)
-{
- stage1_mode &= ~i;
-}
-
-// warning, many things rely on the fact that:
-// - when failing it returns 0
-// - it stops on first non-digit char
-int charstar_to_int(char * s)
-{
- int number = 0;
- while (*s && isdigit(*s)) {
- number = (number * 10) + (*s - '0');
- s++;
- }
- return number;
-}
-
-int total_memory(void)
-{
- int value;
- struct stat statr;
- if (stat("/proc/kcore", &statr))
- return 0;
-
- /* drakx powered: use /proc/kcore and rounds every 4 Mbytes */
- value = 4 * ((int)((float)statr.st_size / 1024 / 1024 / 4 + 0.5));
- log_message("Total Memory: %d Mbytes", value);
-
- return value;
-}
-
-
-int ramdisk_possible(void)
-{
- if (total_memory() > (IS_RESCUE ? MEM_LIMIT_RESCUE : MEM_LIMIT_RAMDISK))
- return 1;
- else {
- log_message("warning, ramdisk is not possible due to low mem!");
- return 0;
- }
-}
-
-
-static void save_stuff_for_rescue(void)
-{
- void save_this_file(char * file) {
- char buf[5000];
- int fd_r, fd_w, i;
- char location[100];
-
- if ((fd_r = open(file, O_RDONLY)) < 0) {
- log_message("can't open %s for read", file);
- return;
- }
- strcpy(location, STAGE2_LOCATION);
- strcat(location, file);
- if ((fd_w = open(location, O_WRONLY)) < 0) {
- log_message("can't open %s for write", location);
- close(fd_r);
- return;
- }
- if ((i = read(fd_r, buf, sizeof(buf))) <= 0) {
- log_message("can't read from %s", file);
- close(fd_r); close(fd_w);
- return;
- }
- if (write(fd_w, buf, i) != i)
- log_message("can't write %d bytes to %s", i, location);
- close(fd_r); close(fd_w);
- log_message("saved file %s for rescue (%d bytes)", file, i);
- }
- save_this_file("/etc/resolv.conf");
-}
-
-
-enum return_type load_ramdisk_fd(int ramdisk_fd, int size)
-{
- BZFILE * st2;
- char * ramdisk = "/dev/ram3"; /* warning, verify that this file exists in the initrd, and that root=/dev/ram3 is actually passed to the kernel at boot time */
- int ram_fd;
- char buffer[32768];
- int z_errnum;
- char * wait_msg = "Loading program into memory...";
- int bytes_read = 0;
- int actually;
- int seems_ok = 0;
-
- st2 = BZ2_bzdopen(ramdisk_fd, "r");
-
- if (!st2) {
- log_message("Opening compressed ramdisk: %s", BZ2_bzerror(st2, &z_errnum));
- stg1_error_message("Could not open compressed ramdisk file.");
- return RETURN_ERROR;
- }
-
- ram_fd = open(ramdisk, O_WRONLY);
- if (ram_fd == -1) {
- log_perror(ramdisk);
- stg1_error_message("Could not open ramdisk device file.");
- return RETURN_ERROR;
- }
-
- init_progression(wait_msg, size);
-
- while ((actually = BZ2_bzread(st2, buffer, sizeof(buffer))) > 0) {
- seems_ok = 1;
- if (write(ram_fd, buffer, actually) != actually) {
- log_perror("writing ramdisk");
- remove_wait_message();
- return RETURN_ERROR;
- }
- update_progression((int)((bytes_read += actually) / RAMDISK_COMPRESSION_RATIO));
- }
-
- if (!seems_ok) {
- log_message("reading compressed ramdisk: %s", BZ2_bzerror(st2, &z_errnum));
- BZ2_bzclose(st2); /* opened by gzdopen, but also closes the associated fd */
- close(ram_fd);
- remove_wait_message();
- stg1_error_message("Could not uncompress second stage ramdisk. "
- "This is probably an hardware error while reading the data. "
- "(this may be caused by a hardware failure or a Linux kernel bug)");
- return RETURN_ERROR;
- }
-
- end_progression();
-
- BZ2_bzclose(st2); /* opened by gzdopen, but also closes the associated fd */
- close(ram_fd);
-
- if (my_mount(ramdisk, STAGE2_LOCATION, "ext2", 1))
- return RETURN_ERROR;
-
- set_param(MODE_RAMDISK);
-
- if (IS_RESCUE) {
- save_stuff_for_rescue();
- if (umount(STAGE2_LOCATION)) {
- log_perror(ramdisk);
- return RETURN_ERROR;
- }
- return RETURN_OK; /* fucksike, I lost several hours wondering why the kernel won't see the rescue if it is alreay mounted */
- }
-
- return RETURN_OK;
-}
-
-
-char * get_ramdisk_realname(void)
-{
- char img_name[500];
- char * stg2_name = get_param_valued("special_stage2");
- char * begin_img = RAMDISK_LOCATION;
- char * end_img = "_stage2.bz2";
-
- if (!stg2_name)
- stg2_name = "mdkinst";
-
- if (IS_RESCUE)
- stg2_name = "rescue";
-
- strcpy(img_name, begin_img);
- strcat(img_name, stg2_name);
- strcat(img_name, end_img);
-
- return strdup(img_name);
-}
-
-
-enum return_type load_ramdisk(void)
-{
- int st2_fd;
- struct stat statr;
- char img_name[500];
-
- strcpy(img_name, IMAGE_LOCATION);
- strcat(img_name, get_ramdisk_realname());
-
- log_message("trying to load %s as a ramdisk", img_name);
-
- st2_fd = open(img_name, O_RDONLY); /* to be able to see the progression */
-
- if (st2_fd == -1) {
- log_message("open ramdisk file (%s) failed", img_name);
- stg1_error_message("Could not open compressed ramdisk file (%s).", img_name);
- return RETURN_ERROR;
- }
-
- if (stat(img_name, &statr))
- return RETURN_ERROR;
- else
- return load_ramdisk_fd(st2_fd, statr.st_size);
-}
-
-/* pixel's */
-void * memdup(void *src, size_t size)
-{
- void * r;
- r = malloc(size);
- memcpy(r, src, size);
- return r;
-}
-
-
-static char ** my_env = NULL;
-static int env_size = 0;
-
-void handle_env(char ** env)
-{
- char ** ptr = env;
- while (ptr && *ptr) {
- ptr++;
- env_size++;
- }
- my_env = malloc(sizeof(char *) * 100);
- memcpy(my_env, env, sizeof(char *) * (env_size+1));
-}
-
-char ** grab_env(void) {
- return my_env;
-}
-
-void add_to_env(char * name, char * value)
-{
- char tmp[500];
- sprintf(tmp, "%s=%s", name, value);
- my_env[env_size] = strdup(tmp);
- env_size++;
- my_env[env_size] = NULL;
-}
-
-
-char ** list_directory(char * direct)
-{
- char * tmp[50000]; /* in /dev there can be many many files.. */
- int i = 0;
- struct dirent *ep;
- DIR *dp = opendir(direct);
- while (dp && (ep = readdir(dp))) {
- if (strcmp(ep->d_name, ".") && strcmp(ep->d_name, "..")) {
- tmp[i] = strdup(ep->d_name);
- i++;
- }
- }
- if (dp)
- closedir(dp);
- tmp[i] = NULL;
- return memdup(tmp, sizeof(char*) * (i+1));
-}
-
-
-int string_array_length(char ** a)
-{
- int i = 0;
- if (!a)
- return -1;
- while (a && *a) {
- a++;
- i++;
- }
- return i;
-}
diff --git a/mdk-stage1/tools.h b/mdk-stage1/tools.h
deleted file mode 100644
index 5d38b0364..000000000
--- a/mdk-stage1/tools.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software
- *
- */
-
-#ifndef _TOOLS_H_
-#define _TOOLS_H_
-
-#include <stdlib.h>
-
-void process_cmdline(void);
-int get_param(int i);
-void set_param(int i);
-void unset_param(int i);
-int charstar_to_int(char * s);
-int total_memory(void);
-int ramdisk_possible(void);
-char * get_ramdisk_realname(void);
-enum return_type load_ramdisk(void);
-enum return_type load_ramdisk_fd(int ramdisk_fd, int size);
-void * memdup(void *src, size_t size);
-void add_to_env(char * name, char * value);
-void handle_env(char ** env);
-char ** grab_env(void);
-char ** list_directory(char * direct);
-int string_array_length(char ** a);
-
-struct param_elem
-{
- char * name;
- char * value;
-};
-
-#define ptr_begins_static_str(pointer,static_str) (!strncmp(pointer,static_str,sizeof(static_str)-1))
-#define streq !strcmp
-
-#endif
diff --git a/mdk-stage1/url.c b/mdk-stage1/url.c
deleted file mode 100644
index ada5696cd..000000000
--- a/mdk-stage1/url.c
+++ /dev/null
@@ -1,501 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan <ewt@redhat.com> and Matt Wilson <msw@redhat.com>
- *
- * Copyright 1999 Red Hat, Inc.
- *
- */
-
-#include <alloca.h>
-#include <sys/socket.h>
-#include <sys/types.h>
-#include <netinet/in_systm.h>
-
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <unistd.h>
-#include <sys/poll.h>
-
-#include <netinet/in.h>
-#include <netinet/ip.h>
-#include <arpa/inet.h>
-
-#include "dns.h"
-#include "log.h"
-#include "tools.h"
-
-#include "url.h"
-
-
-#define TIMEOUT_SECS 60
-#define BUFFER_SIZE 4096
-
-
-static int ftp_check_response(int sock, char ** str)
-{
- static char buf[BUFFER_SIZE + 1];
- int bufLength = 0;
- struct pollfd polls;
- char * chptr, * start;
- int bytesRead, rc = 0;
- int doesContinue = 1;
- char errorCode[4];
-
- errorCode[0] = '\0';
-
- do {
- polls.fd = sock;
- polls.events = POLLIN;
- if (poll(&polls, 1, TIMEOUT_SECS*1000) != 1)
- return FTPERR_BAD_SERVER_RESPONSE;
-
- bytesRead = read(sock, buf + bufLength, sizeof(buf) - bufLength - 1);
-
- bufLength += bytesRead;
-
- buf[bufLength] = '\0';
-
- /* divide the response into lines, checking each one to see if
- we are finished or need to continue */
-
- start = chptr = buf;
-
- do {
- while (*chptr != '\n' && *chptr) chptr++;
-
- if (*chptr == '\n') {
- *chptr = '\0';
- if (*(chptr - 1) == '\r') *(chptr - 1) = '\0';
- if (str) *str = start;
-
- if (errorCode[0]) {
- if (!strncmp(start, errorCode, 3) && start[3] == ' ')
- doesContinue = 0;
- } else {
- strncpy(errorCode, start, 3);
- errorCode[3] = '\0';
- if (start[3] != '-') {
- doesContinue = 0;
- }
- }
-
- start = chptr + 1;
- chptr++;
- } else {
- chptr++;
- }
- } while (*chptr);
-
- if (doesContinue && chptr > start) {
- memcpy(buf, start, chptr - start - 1);
- bufLength = chptr - start - 1;
- } else {
- bufLength = 0;
- }
- } while (doesContinue);
-
- if (*errorCode == '4' || *errorCode == '5') {
- if (!strncmp(errorCode, "550", 3)) {
- return FTPERR_FILE_NOT_FOUND;
- }
-
- return FTPERR_BAD_SERVER_RESPONSE;
- }
-
- if (rc) return rc;
-
- return 0;
-}
-
-static int ftp_command(int sock, char * command, char * param)
-{
- char buf[500];
- int rc;
-
- strcpy(buf, command);
- if (param) {
- strcat(buf, " ");
- strcat(buf, param);
- }
-
- strcat(buf, "\r\n");
-
- if (write(sock, buf, strlen(buf)) != (ssize_t)strlen(buf)) {
- return FTPERR_SERVER_IO_ERROR;
- }
-
- if ((rc = ftp_check_response(sock, NULL)))
- return rc;
-
- return 0;
-}
-
-static int get_host_address(char * host, struct in_addr * address)
-{
- if (isdigit(host[0])) {
- if (!inet_aton(host, address)) {
- return FTPERR_BAD_HOST_ADDR;
- }
- } else {
- if (mygethostbyname(host, address))
- return FTPERR_BAD_HOSTNAME;
- }
-
- return 0;
-}
-
-int ftp_open_connection(char * host, char * name, char * password, char * proxy)
-{
- int sock;
- struct in_addr serverAddress;
- struct sockaddr_in destPort;
- char * buf;
- int rc;
- int port = 21;
-
- if (!strcmp(name, "")) {
- name = "anonymous";
- password = "-drakx@";
- }
-
- if (strcmp(proxy, "")) {
- buf = alloca(strlen(name) + strlen(host) + 5);
- sprintf(buf, "%s@%s", name, host);
- name = buf;
- host = proxy;
- }
-
- if ((rc = get_host_address(host, &serverAddress))) return rc;
-
- sock = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
- if (sock < 0) {
- return FTPERR_FAILED_CONNECT;
- }
-
- destPort.sin_family = AF_INET;
- destPort.sin_port = htons(port);
- destPort.sin_addr = serverAddress;
-
- if (connect(sock, (struct sockaddr *) &destPort, sizeof(destPort))) {
- close(sock);
- return FTPERR_FAILED_CONNECT;
- }
-
- /* ftpCheckResponse() assumes the socket is nonblocking */
- if (fcntl(sock, F_SETFL, O_NONBLOCK)) {
- close(sock);
- return FTPERR_FAILED_CONNECT;
- }
-
- if ((rc = ftp_check_response(sock, NULL))) {
- return rc;
- }
-
- if ((rc = ftp_command(sock, "USER", name))) {
- close(sock);
- return rc;
- }
-
- if ((rc = ftp_command(sock, "PASS", password))) {
- close(sock);
- return rc;
- }
-
- if ((rc = ftp_command(sock, "TYPE", "I"))) {
- close(sock);
- return rc;
- }
-
- return sock;
-}
-
-
-int ftp_data_command(int sock, char * command, char * param)
-{
- int dataSocket;
- struct sockaddr_in dataAddress;
- int i, j;
- char * passReply;
- char * chptr;
- char retrCommand[500];
- int rc;
-
- if (write(sock, "PASV\r\n", 6) != 6) {
- return FTPERR_SERVER_IO_ERROR;
- }
- if ((rc = ftp_check_response(sock, &passReply)))
- return FTPERR_PASSIVE_ERROR;
-
- chptr = passReply;
- while (*chptr && *chptr != '(') chptr++;
- if (*chptr != '(') return FTPERR_PASSIVE_ERROR;
- chptr++;
- passReply = chptr;
- while (*chptr && *chptr != ')') chptr++;
- if (*chptr != ')') return FTPERR_PASSIVE_ERROR;
- *chptr-- = '\0';
-
- while (*chptr && *chptr != ',') chptr--;
- if (*chptr != ',') return FTPERR_PASSIVE_ERROR;
- chptr--;
- while (*chptr && *chptr != ',') chptr--;
- if (*chptr != ',') return FTPERR_PASSIVE_ERROR;
- *chptr++ = '\0';
-
- /* now passReply points to the IP portion, and chptr points to the
- port number portion */
-
- dataAddress.sin_family = AF_INET;
- if (sscanf(chptr, "%d,%d", &i, &j) != 2) {
- return FTPERR_PASSIVE_ERROR;
- }
- dataAddress.sin_port = htons((i << 8) + j);
-
- chptr = passReply;
- while (*chptr++) {
- if (*chptr == ',') *chptr = '.';
- }
-
- if (!inet_aton(passReply, &dataAddress.sin_addr))
- return FTPERR_PASSIVE_ERROR;
-
- dataSocket = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
- if (dataSocket < 0) {
- return FTPERR_FAILED_CONNECT;
- }
-
- if (!param)
- sprintf(retrCommand, "%s\r\n", command);
- else
- sprintf(retrCommand, "%s %s\r\n", command, param);
-
- i = strlen(retrCommand);
-
- if (write(sock, retrCommand, i) != i) {
- return FTPERR_SERVER_IO_ERROR;
- }
-
- if (connect(dataSocket, (struct sockaddr *) &dataAddress,
- sizeof(dataAddress))) {
- close(dataSocket);
- return FTPERR_FAILED_DATA_CONNECT;
- }
-
- if ((rc = ftp_check_response(sock, NULL))) {
- close(dataSocket);
- return rc;
- }
-
- return dataSocket;
-}
-
-
-static int ftp_get_filesize(int sock, char * remotename)
-{
- int size = 0;
- char buf[2000];
- char file[500];
- char * ptr;
- int fd, rc, tot;
- int i;
-
- strcpy(buf, remotename);
- ptr = strrchr(buf, '/');
- if (!*ptr)
- return -1;
- *ptr = '\0';
-
- strcpy(file, ptr+1);
-
- if ((rc = ftp_command(sock, "CWD", buf))) {
- return -1;
- }
-
- fd = ftp_data_command(sock, "LIST", NULL);
- if (fd <= 0) {
- close(sock);
- return -1;
- }
-
- ptr = buf;
- while ((tot = read(fd, ptr, sizeof(buf) - (ptr - buf))) != 0)
- ptr += tot;
- *ptr = '\0';
- close(fd);
-
- if (!(ptr = strstr(buf, file))) {
- log_message("FTP/get_filesize: Bad mood, directory does not contain searched file (%s)", file);
- if (ftp_end_data_command(sock))
- close(sock);
- return -1;
- }
-
- for (i=0; i<4; i++) {
- while (*ptr && *ptr != ' ')
- ptr--;
- while (*ptr && *ptr == ' ')
- ptr--;
- }
- while (*ptr && *ptr != ' ')
- ptr--;
-
- if (ptr)
- size = charstar_to_int(ptr+1);
- else
- size = 0;
-
- if (ftp_end_data_command(sock)) {
- close(sock);
- return -1;
- }
-
- return size;
-}
-
-
-int ftp_start_download(int sock, char * remotename, int * size)
-{
- if ((*size = ftp_get_filesize(sock, remotename)) == -1) {
- log_message("FTP: could not get filesize (trying to continue)");
- *size = 0;
- }
- return ftp_data_command(sock, "RETR", remotename);
-}
-
-
-int ftp_end_data_command(int sock)
-{
- if (ftp_check_response(sock, NULL))
- return FTPERR_BAD_SERVER_RESPONSE;
-
- return 0;
-}
-
-
-int http_download_file(char * hostname, char * remotename, int * size)
-{
- char * buf;
- char headers[4096];
- char * nextChar = headers;
- int checkedCode;
- struct in_addr serverAddress;
- struct pollfd polls;
- int sock;
- int rc;
- struct sockaddr_in destPort;
- char * header_content_length = "Content-Length: ";
-
- if ((rc = get_host_address(hostname, &serverAddress))) return rc;
-
- sock = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
- if (sock < 0) {
- return FTPERR_FAILED_CONNECT;
- }
-
- destPort.sin_family = AF_INET;
- destPort.sin_port = htons(80);
- destPort.sin_addr = serverAddress;
-
- if (connect(sock, (struct sockaddr *) &destPort, sizeof(destPort))) {
- close(sock);
- return FTPERR_FAILED_CONNECT;
- }
-
- buf = alloca(strlen(remotename) + 20);
- sprintf(buf, "GET %s HTTP/0.9\r\n\r\n", remotename);
- write(sock, buf, strlen(buf));
-
- /* This is fun; read the response a character at a time until we:
-
- 1) Get our first \r\n; which lets us check the return code
- 2) Get a \r\n\r\n, which means we're done */
-
- *nextChar = '\0';
- checkedCode = 0;
- while (!strstr(headers, "\r\n\r\n")) {
- polls.fd = sock;
- polls.events = POLLIN;
- rc = poll(&polls, 1, TIMEOUT_SECS*1000);
-
- if (rc == 0) {
- close(sock);
- return FTPERR_SERVER_TIMEOUT;
- } else if (rc < 0) {
- close(sock);
- return FTPERR_SERVER_IO_ERROR;
- }
-
- if (read(sock, nextChar, 1) != 1) {
- close(sock);
- return FTPERR_SERVER_IO_ERROR;
- }
-
- nextChar++;
- *nextChar = '\0';
-
- if (nextChar - headers == sizeof(headers)) {
- close(sock);
- return FTPERR_SERVER_IO_ERROR;
- }
-
- if (!checkedCode && strstr(headers, "\r\n")) {
- char * start, * end;
-
- checkedCode = 1;
- start = headers;
- while (!isspace(*start) && *start) start++;
- if (!*start) {
- close(sock);
- return FTPERR_SERVER_IO_ERROR;
- }
- start++;
-
- end = start;
- while (!isspace(*end) && *end) end++;
- if (!*end) {
- close(sock);
- return FTPERR_SERVER_IO_ERROR;
- }
-
- *end = '\0';
- if (!strcmp(start, "404")) {
- close(sock);
- return FTPERR_FILE_NOT_FOUND;
- } else if (strcmp(start, "200")) {
- close(sock);
- return FTPERR_BAD_SERVER_RESPONSE;
- }
-
- *end = ' ';
- }
- }
-
- if ((buf = strstr(headers, header_content_length)))
- *size = charstar_to_int(buf + strlen(header_content_length));
- else
- *size = 0;
-
- return sock;
-}
diff --git a/mdk-stage1/url.h b/mdk-stage1/url.h
deleted file mode 100644
index 5a59bd814..000000000
--- a/mdk-stage1/url.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan <ewt@redhat.com> and Matt Wilson <msw@redhat.com>
- *
- * Copyright 1999 Red Hat, Inc.
- *
- */
-
-#ifndef _URL_H_
-#define _URL_H_
-
-int ftp_open_connection(char * host, char * name, char * password, char * proxy);
-int ftp_start_download(int sock, char * remotename, int * size);
-int ftp_end_data_command(int sock);
-
-int http_download_file(char * hostname, char * remotename, int * size);
-
-
-#define FTPERR_BAD_SERVER_RESPONSE -1
-#define FTPERR_SERVER_IO_ERROR -2
-#define FTPERR_SERVER_TIMEOUT -3
-#define FTPERR_BAD_HOST_ADDR -4
-#define FTPERR_BAD_HOSTNAME -5
-#define FTPERR_FAILED_CONNECT -6
-#define FTPERR_FILE_IO_ERROR -7
-#define FTPERR_PASSIVE_ERROR -8
-#define FTPERR_FAILED_DATA_CONNECT -9
-#define FTPERR_FILE_NOT_FOUND -10
-#define FTPERR_UNKNOWN -100
-
-#endif
diff --git a/mdk-stage1/usb-resource/.cvsignore b/mdk-stage1/usb-resource/.cvsignore
deleted file mode 100644
index a7d0cfa9a..000000000
--- a/mdk-stage1/usb-resource/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-usb-ids.h
diff --git a/mdk-stage1/usb-resource/Makefile b/mdk-stage1/usb-resource/Makefile
deleted file mode 100644
index eb80ce6da..000000000
--- a/mdk-stage1/usb-resource/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
- #******************************************************************************
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 MandrakeSoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-all: usb-ids.h
-
-usb-ids.h: /usr/share/ldetect-lst/usbtable update-usb-ids.pl
- perl update-usb-ids.pl > $@ || rm -f $@
-
-clean:
- rm -f usb-ids.h
diff --git a/mdk-stage1/usb-resource/update-usb-ids.pl b/mdk-stage1/usb-resource/update-usb-ids.pl
deleted file mode 100755
index 2a54a678b..000000000
--- a/mdk-stage1/usb-resource/update-usb-ids.pl
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use MDK::Common;
-
-require '/usr/bin/merge2pcitable.pl';
-my $pci = read_pcitable("/usr/share/ldetect-lst/pcitable");
-my $usb = read_pcitable("/usr/share/ldetect-lst/usbtable");
-
-print '
-
-
-struct usb_module_map {
- unsigned short vendor; /* vendor */
- unsigned short id; /* device */
- const char *name; /* human readable name */
- const char *module; /* module to load */
-};
-
-';
-
-print "struct pci_module_map usb_pci_ids[] = {
-
-";
-
-while (my ($k, $v) = each %$pci) {
- $v->[0] =~ /^usb-|^ehci-hcd/ or next;
- $k =~ /^(....)(....)/;
- printf qq|\t{ 0x%s, 0x%s, "", "%s" },\n|,
- $1, $2, $v->[0];
-}
-
-print "};
-int usb_num_ids=sizeof(usb_pci_ids)/sizeof(struct pci_module_map);
-";
-
-print "struct usb_module_map usb_usb_ids[] = {
-";
-
-my @modules = chomp_(`perl ../../kernel/modules.pl pci_modules4stage1:"network/usb disk/usb"`);
-
- foreach my $k (sort keys %$usb) {
- my $v = $usb->{$k};
- member($v->[0], @modules) or next;
- $k =~ /^(....)(....)/;
- printf qq|\t{ 0x%s, 0x%s, "%s", "%s" },\n|,
- $1, $2, $v->[1], $v->[0];
- }
-
- print "};
-int usb_usb_num_ids=sizeof(usb_usb_ids)/sizeof(struct usb_module_map);
-";
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog
deleted file mode 100644
index 77356cea0..000000000
--- a/perl-install/ChangeLog
+++ /dev/null
@@ -1,25476 +0,0 @@
-2002/07/10 daouda
-
- * standalone/drakbug:
- - code update
- - use local http server for test.
-
-2002/07/10 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm, install_steps_gtk.pm, crypto.pm, share/list, pkgs.pm,
- install_any.pm, install2.pm, install_steps_interactive.pm: use perl-URPM
- instead of rpmtools.
-
- * tools/Makefile: use vendor_perl instead of site_perl (check of
- rpmtools.pm and packdrake.pm presence).
-
-2002/07/10 Pixel <pixel@mandrakesoft.com>
-
- * tools/Makefile: nicer use of vendor_perl instead of site_perl (check of
- rpmtools.pm and
- packdrake.pm presence) ... i had forgot to commit :-(
-
- * ftp.pm: don't let Timeout kill us
-
- * modparm.pm: rollback titi's modif
-
- * detect_devices.pm: cleanup
-
- * share/list: add integer.pm (needed by Time::Local (needed by Net::FTP))
-
-2002/07/10 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * drakxtools.spec: list and describe all gui tools from drakxtools
- enhance cohenrency: step 1
- - ide and scsi devices use channel rather than bus to store their
- physical connection, which is more logic (at least for eide)
- - all devices have their connection bus in bus field, not in bus for
- {pci,usb,...} and interface_type for {scsi,eide,other_block_devices}
-
- - detect_devices:getIDE() : add eide_hds hash in order to be able to
- split info field between model and vendor
-
- - harddrake::ui : code reduction allowed by the above changes
- fix parrallel build
- fix perl depandancy on new perl
-
- * diskdrake/interactive.pm, detect_devices.pm, install_steps.pm,
- harddrake/ui.pm: enhance cohenrency: step 1
- - ide and scsi devices use channel rather than bus to store their
- physical connection, which is more logic (at least for eide)
- - all devices have their connection bus in bus field, not in bus for
- {pci,usb,...} and interface_type for {scsi,eide,other_block_devices}
-
- - detect_devices:getIDE() : add eide_hds hash in order to be able to
- split info field between model and vendor
-
- - harddrake::ui : code reduction allowed by the above changes
-
- * modparm.pm: typo fix
- no need to test two times if modinfo is executable in normal (ie not
- in drakx) case ...
-
- * Makefile, Makefile.drakxtools: remove all
- (use\s+(diagnostics|vars|strict)' instances
-
-2002/07/09 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: have MDK::Common's in TAGS
-
- * detect_devices.pm: rewrite getSCSI, now handling scanners
-
- * share/list: adapt to new perl 5.8.0
-
- * common.pm, modparm.pm: move join_lines to common
-
-2002/07/09 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: have MDK::Common's in TAGS
-
- * detect_devices.pm: rewrite getSCSI, now handling scanners
-
- * share/list: adapt to new perl 5.8.0
-
- * common.pm, modparm.pm: move join_lines to common
-
-2002/07/09 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * harddrake/TODO: fix boot freeze on hw change: initscript was running us
- with stdout
- redirected to /dev/null; just use a small sh wrapper to fix it
- update
-
- * standalone/service_harddrake.sh:
- - redirect stderr
- - remove old commented stuff
- fix boot freeze on hw change: initscript was running us with stdout
- redirected to /dev/null; just use a small sh wrapper to fix it
-
- * Makefile.drakxtools: fix boot freeze on hw change: initscript was
- running us with stdout
- redirected to /dev/null; just use a small sh wrapper to fix it
-
- * standalone/service_harddrake:
- - configurator got displayed
- - move timeout around configurator asking (still not 100% ok)
- time out after 200 seconds
- fix boot freeze on hw change: initscript was running us with stdout
- redirected to /dev/null; just use a small sh wrapper to fix it
-
- * drakxtools.spec: fix url
- add harddrake service wrapper
- really final changes
- final batch of changes for -3mdk ?
- fix boot freeze on hw change: initscript was running us with stdout
- redirected to /dev/null; just use a small sh wrapper to fix it
-
- * Makefile.config: add harddrake service wrapper to installed files
-
- * harddrake/ui.pm:
- - add channel: primary/slave for eide deivces
- - get rid of ->{set,get}_user_data
- ensure we don't mix scsi and pci devices
-
- * harddrake/bttv.pm: log only if options set
- typo fix
- only log explanations in standalone mode
-
- * share/po/Makefile: fake make so that its builtin rule to create file
- from file.sh doesn't
- nuke service_harddrake with it wrapper
-
-2002/07/08 daouda
-
- * standalone/drakbug:
- - detect package automatically when app is chosen
-
-2002/07/08 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: create the list_modules symlink
- make test_pms should now work (was pb with list_modules.pm)
-
- * install_steps.pm, any.pm: mtools config so that "mdir a:" accesses the
- usb floppy if one is there
-
- * diskdrake/hd_gtk.pm: do not display "Clear all" (and the other per kind
- buttons) for the raid tab
-
- * install_steps_interactive.pm: in case the licence is refused, ask for
- confirmation
-
- * diskdrake/interactive.pm: make Clear_all work on a LVM VG
- make Clear_all remove partitions from raids
-
-2002/07/08 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * harddrake/TODO: remove fixed stuff
-
- * Makefile.drakxtools: s/PHONY/.PHONY/
- - simplifications
- - harddrake support is complete
-
- * drakxtools.spec: update
- fix post: add start argument
- service changes batch for 2mdk
- rpmlint fixes
- parrallel build
- 1.1.8-2mdk
- - enhance descriptions
- - various spec clean
- split-up between harddrake and harddrake-ui
- complete changelog
- - obsoletes/provides libdetect-lst, libdetect-lst-devel, detect,
- detect-lst
- - don't restart harddrake on install
- - some stuff moved into Makefile.drakxtools
- - fix harddrake menu entry
- - fix build
-
- * harddrake/data.pm: cache @devices so that hw probe is only done once
-
- * standalone/harddrake2: no need to 'use strict' in "binary"
-
- * standalone/service_harddrake:
- - only work on start
- - add "please wait" message
- - really don't cry when no previous config
- skip configuration on firt run
- skip hw classes without configurator (which'll have a configurator
- after porting updfstab)
-
- * harddrake/ui.pm:
- - rehide "run config tool" button when it has been displayed in
- another hw class
- don't display "run config tool" button if no configurator availlable
- - center the main window
- - remove drakx decorations
- mice:
- - s/nbuttons/Number of buttons/
- - delete qw(MOUSETYPE XMOUSETYPE unsafe)
- don't delete info field in normal path
- - eide devices: split up info field into vendor and model fields
- - complete help
- hummm ... eide: 0->master, 1->slave :-(
- - remove save_report menu entry, this is done by service_harddrake
- - move $in declaration near where it's used
- eide hard disks : print master/slave for bus_location
-
-2002/07/08 daouda
-
- * Makefile.config:
- - add drakbug
-
- * drakxtools.spec:
- - add dir recursively
-
- * standalone/drakbug:
- - detect package automatically when app is chosen
- - standalone app
-
-2002/07/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/mount.c: small readability & size enhancement
-
-2002/07/08 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: in case the licence is refused, ask for
- confirmation
- help perl_checker
-
- * diskdrake/hd_gtk.pm: do not display "Clear all" (and the other per kind
- buttons) for the raid tab
-
- * diskdrake/interactive.pm: make Clear_all work on a LVM VG
- make Clear_all remove partitions from raids
-
- * Makefile: create the list_modules symlink
- make test_pms should now work (was pb with list_modules.pm)
-
-2002/07/08 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * harddrake/ui.pm:
- - remove save_report menu entry, this is done by service_harddrake
- - move $in declaration near where it's used
- eide hard disks : print master/slave for bus_location
- - remove dead stuff
- - comment some stuff
- minor simplication
- various cleanups:
- - move all harddrake modules to harddrake namespace
- - replace two use by require so that it's not done at compil time
- but at runtime
- - there was a missing $ in harddrake::ui.pm
-
- * harddrake/TODO: update todo list
-
- * install_steps_interactive.pm, standalone/draknet, harddrake/bttv.pm,
- standalone/harddrake2, standalone/service_harddrake, harddrake/data.pm:
- various cleanups:
- - move all harddrake modules to harddrake namespace
- - replace two use by require so that it's not done at compil time
- but at runtime
- - there was a missing $ in harddrake::ui.pm
-
- * drakxtools.spec:
- - some stuff moved into Makefile.drakxtools
- - fix harddrake menu entry
- - fix build
- fixes for missing files
- enhanced description
-
- * modules.pm:
- - s/snd-card/snd/
- - make some code clearer
-
- * Makefile.drakxtools:
- - simplifications
- - harddrake support is complete
-
- * scanner.pm: this doesn't need either "#!/usr/bin/perl" nor "use lib
- qw(/usr/lib/libDrakX);"
-
- * standalone/drakxtv:
- - fix options handling
- - use "perl -w"
- - s/bttv/harddrake::bttv/ due to recent changes
-
-2002/07/07 daouda
-
- * drakxtools.spec:
- - directory should exist before mv'ing things (mkdir
- %%buildroot%%_initrddir)
-
-2002/07/07 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm: smarter raidAutoStartRaidtab
- great new raidAutoStartRaidtab allowing to handle existing software
- raids
- even when RAID_AUTORUN is not supported by kernel (which is the case for
- us
- since md.o is a not builtin the kernel)
-
- * fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
- software raids
- even when RAID_AUTORUN is not supported by kernel (which is the case for
- us
- since md.o is a not builtin the kernel)
-
- * devices.pm: use c::total_sectors() instead of BLKGETSIZE
-
- * diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
- marked dirty on any actions that destroy the raid
-
-2002/07/07 daouda
-
- * Makefile:
- - remove share/wizard.rc in DISTFILE
-
- * drakxtools.spec:
- - directory should exist before mv'ing things (mkdir
- %%buildroot%%_initrddir)
- - mv typo in %install section (titi sux)
-
-2002/07/07 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm: smarter raidAutoStartRaidtab
- great new raidAutoStartRaidtab allowing to handle existing software
- raids
- even when RAID_AUTORUN is not supported by kernel (which is the case for
- us
- since md.o is a not builtin the kernel)
- remove detect_devices::check (including the annoying log about no
- modules for the pci entry)
-
- * modules.pm: new "append_to_etc_modules" function
- remove detect_devices::check (including the annoying log about no
- modules for the pci entry)
-
- * fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
- software raids
- even when RAID_AUTORUN is not supported by kernel (which is the case for
- us
- since md.o is a not builtin the kernel)
-
- * any.pm: small regexp cleanup
-
- * fs.pm, partition_table.pm: for greater symmetry with smb, drop isNfs in
- favour of isThisFs('nfs', ...)
-
- * interactive_newt.pm: make the buttons work in all cases
- - workaround segfaults
- - ensure the perl values are set when calling the clicked_may_quit
- callback
-
- * devices.pm: use c::total_sectors() instead of BLKGETSIZE
-
- * diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
- marked dirty on any actions that destroy the raid
-
-2002/07/06 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (ask_users): the user name length must be <= 32
-
- * diskdrake/interactive.pm (as suggested by Alexander Skwar)
- - in interactive::check_type, check if the package (like jfsprogs) is
- installed
- - use interactive::check_type where usefull
- - cleanup
-
- * Makefile.config: standalone/drakbug doesn't exist! (why did deush add
- it???)
- it is standalone/harddrake2, not standalone/harddrake (poor deush must
- be loosing his brain :p)
-
- * diskdrake/hd_gtk.pm: s/check_type/diskdrake::interactive::check_type/
- - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
- - remove unused wizard.rc
- (as suggested by Alexander Skwar)
- - in interactive::check_type, check if the package (like jfsprogs) is
- installed
- - use interactive::check_type where usefull
- - cleanup
-
- * fsedit.pm: /root and /mnt must "remain within the root filesystem" (ie
- can't be used as mountpoints), dixit redhat
- (package_needed_for_partition_type): return the package needed for a
- partition type
- (check_type): cleanup
-
- * install_any.pm (setDefaultPackages): use
- fsedit::package_needed_for_partition_type to get things like jfsprogs
-
- * fs.pm: supermount now handles fs=auto, using it :)
-
- * Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec:
- - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
- - remove unused wizard.rc
-
-2002/07/06 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * Makefile.config: add the harddrake service which was missing
-
- * printer.pm: try to simplify
-
- * harddrake/ui.pm: simplify: use reverse
- - help system:
- - add an help entry in help menu;
- - begin to describe information fields
-
- - reformat license in about window
-
- - information frame (mostly fixing incoherency between various hw
- classes fields)
-
- - s/media type/media class/
-
- - s/info/Hardware id/
-
- - s/device/device file/
-
- - split description into manufacturer/description
-
- - eide devices:
-
- - rename bus as bus_location
-
- - set interface_type as bus
-
- - scsi devices:
-
- - set bus to SCSI
-
- - set bus_location to bus:id fields
-
- - don't print pci subids when non set
-
- - remove fields that were already used above (vendor id subvendor
- subid pci_bus pci_device pci_function)
-
- - no need to return window after program exit
-
- - print usage if needed
-
- - embed hardware tree in a "detected hardware" frame
-
- - cleanups:
-
- - rename widget2 as frame
-
- - remove dead commented code
-
- * drakxtools.spec: add harddrake2 service
-
- * standalone/icons/harddrake2/webcam.png,
- standalone/icons/harddrake2/harddrake.png,
- standalone/icons/harddrake2/keyboard.png,
- standalone/icons/harddrake2/ide_hd.png,
- standalone/icons/harddrake2/cable.png,
- standalone/icons/harddrake2/video.png,
- standalone/icons/harddrake2/tape.png,
- standalone/icons/harddrake2/joystick.png,
- standalone/icons/harddrake2/harddisk.png,
- standalone/icons/harddrake2/usb.png,
- standalone/icons/harddrake2/memory.png,
- standalone/icons/harddrake2/hw_network.png,
- standalone/icons/harddrake2/scsi_hd.png,
- standalone/icons/harddrake2/unknown.png,
- standalone/icons/harddrake2/floppy.png,
- standalone/icons/harddrake2/hw_printer.png,
- standalone/icons/harddrake2/scanner.png,
- standalone/icons/harddrake2/cd.png,
- standalone/icons/harddrake2/isdn.png,
- standalone/icons/harddrake2/tv.png,
- standalone/icons/harddrake2/sound.png,
- standalone/icons/harddrake2/scsi.png,
- standalone/icons/harddrake2/cpu.png,
- standalone/icons/harddrake2/hw_mouse.png,
- standalone/icons/harddrake2/modem.png,
- standalone/icons/harddrake2/K7.png: add harddrake2 icons
-
-2002/07/06 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (ask_users): the user name length must be <= 32
-
- * commands.pm: adapt to new modprobe.pm
-
- * diskdrake/hd_gtk.pm:
- - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
- - remove unused wizard.rc
- (as suggested by Alexander Skwar)
- - in interactive::check_type, check if the package (like jfsprogs) is
- installed
- - use interactive::check_type where usefull
- - cleanup
-
- * diskdrake/interactive.pm (as suggested by Alexander Skwar)
- - in interactive::check_type, check if the package (like jfsprogs) is
- installed
- - use interactive::check_type where usefull
- - cleanup
- (Resize): resize2fs handles ext3 :)
-
- * install_any.pm (setDefaultPackages): use
- fsedit::package_needed_for_partition_type to get things like jfsprogs
- when merge_fstabs, handle in a different way mtab and fstab (or
- manualFstab)
- => this allows to force the type&options in manualFstab
-
- * fsedit.pm (package_needed_for_partition_type): return the package needed
- for a partition type
- (check_type): cleanup
-
- * docs/comparisons: various remarks about mandrake
-
- * partition_table_lvm_PV.pm: Allows people having PVs on unpartitioned
- disks to install
- (but no way to create such beasts)
-
- * Makefile.config: standalone/drakbug doesn't exist! (why did deush add
- it???)
- it is standalone/harddrake2, not standalone/harddrake (poor deush must
- be loosing his brain :p)
- add harddrake pm's
-
- * partition_table.pm: Allows people having PVs on unpartitioned disks to
- install
- (but no way to create such beasts)
- cleanup
-
- * fs.pm: supermount now handles fs=auto, using it :)
- when merge_fstabs, handle in a different way mtab and fstab (or
- manualFstab)
- => this allows to force the type&options in manualFstab
-
- * Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec:
- - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
- - remove unused wizard.rc
-
-2002/07/06 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * standalone/lsnetdrake: simplify
-
- * Makefile: add harddrake to DISTFILES
-
- * printer.pm: try to simplify
-
- * harddrake/TODO: add bits regarding eide and scsi
-
- * standalone/harddrake2: add missing 'use lib' due to harddrak::ui changes
-
- * harddrake/ui.pm: simplify: use reverse
- - help system:
- - add an help entry in help menu;
- - begin to describe information fields
-
- - reformat license in about window
-
- - information frame (mostly fixing incoherency between various hw
- classes fields)
-
- - s/media type/media class/
-
- - s/info/Hardware id/
-
- - s/device/device file/
-
- - split description into manufacturer/description
-
- - eide devices:
-
- - rename bus as bus_location
-
- - set interface_type as bus
-
- - scsi devices:
-
- - set bus to SCSI
-
- - set bus_location to bus:id fields
-
- - don't print pci subids when non set
-
- - remove fields that were already used above (vendor id subvendor
- subid pci_bus pci_device pci_function)
-
- - no need to return window after program exit
-
- - print usage if needed
-
- - embed hardware tree in a "detected hardware" frame
-
- - cleanups:
-
- - rename widget2 as frame
-
- - remove dead commented code
-
- * harddrake/data.pm: add a configurator for sound
-
- * standalone/icons/harddrake2/cable.png,
- standalone/icons/harddrake2/tape.png,
- standalone/icons/harddrake2/usb.png,
- standalone/icons/harddrake2/hw_network.png,
- standalone/icons/harddrake2/unknown.png,
- standalone/icons/harddrake2/hw_printer.png,
- standalone/icons/harddrake2/scanner.png,
- standalone/icons/harddrake2/isdn.png,
- standalone/icons/harddrake2/cd.png,
- standalone/icons/harddrake2/scsi.png,
- standalone/icons/harddrake2/hw_mouse.png,
- standalone/icons/harddrake2/K7.png,
- standalone/icons/harddrake2/webcam.png,
- standalone/icons/harddrake2/harddrake.png,
- standalone/icons/harddrake2/keyboard.png,
- standalone/icons/harddrake2/ide_hd.png,
- standalone/icons/harddrake2/harddisk.png,
- standalone/icons/harddrake2/joystick.png,
- standalone/icons/harddrake2/video.png,
- standalone/icons/harddrake2/memory.png,
- standalone/icons/harddrake2/scsi_hd.png,
- standalone/icons/harddrake2/floppy.png,
- standalone/icons/harddrake2/sound.png,
- standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/cpu.png,
- standalone/icons/harddrake2/modem.png: add harddrake2 icons
-
-2002/07/05 daouda
-
- * Makefile.config:
- - add harddrake drakbug drakTermServ to STANDALONEPMS_
-
- * drakxtools.spec:
- - snapshot
- - new entries:
- o harddrake2 : new hardware detection && configuration tool
- o drakbugreport: bug reporting tool a la Kde (not working!)
- o drakTermServ : configuration tool for diskless stations.
-
-2002/07/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (prepare_write_fstab): for supermount, have "none" as the device
- (cleaner, and
- more coherent with the "supermount" script (tx to FredC))
-
-2002/07/05 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * install_steps_interactive.pm: minimize startup: only load
- harddrake::bttv if the user click on "tv
- card" field in the hw summary window
- use harddrake::bttv to let people configure their tv card if it's
- misdetected
-
- * harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
- a module)
- POSIX is no more used too.
-
- * harddrake/bttv.pm: remove device test: there're only two harddrake::bttv
- users,
- install_steps_interactive.pm and drakxtv which both have already
- tested that a bttv managed tv card is there.
- - add more tv cards
- - enable users to select number of buffers for mmap()
- - better description for pll setting
-
- - add tooltips help for some entries
- tv cards list:
-
- - split multi-cards entries
-
- - reverse the hash (needed since now bttv card types are not
- anymore unique)
-
- - complete the list from various sources
-
- - use a tree to display the list, it's clearer now since it's
- splitted by vendors
-
- - longer message
- - remove uneeded stuff for modules ("#!/..", "use lib..", "use
- standalone", ...)
-
- - simplify bttv options managment:
-
- - use if_, thanks MDK::Common
-
- - s/mapn/map by using a hash at first
-
- - s/mapn{if}/map{if_}
-
- - don't read/write modules.conf here, drakx take care of that for us
-
- thus, the test program became:
-
- #!/usr/bin/perl
-
- use strict;
- use lib qw(/usr/lib/libDrakX);
-
- use standalone;
- use bttv;
- use interactive;
- use modules;
-
- modules::read_conf;
- bttv::config('interactive'->vnew());
- modules::write_conf;
- spec29: bttv configuration part of drakxtv.
- it can be used by:
-
- #!/usr/bin/perl
-
- use strict;
- use lib qw(/usr/lib/libDrakX);
-
- use standalone;
- use harddrake::bttv;
- use interactive;
-
- bttv::config('interactive'->vnew());
-
- * drakxtools.spec: fix typo
- fix dirs1/dirs2 mismatch
- - M-q descriptions
- - simplify file lists building
- - we can use several -f on one "%%files" line
-
- * standalone/drakxtv: if we're root and there's a tv card managed by bttv,
- offer to
- configure bttv trough harddrake::bttv
-
- * tools/cvslog2changelog.pl: typo fix
-
- * harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/05 François Pons <fpons@mandrakesoft.com>
-
- * Makefile:
- - handle /lib/i686 case
- - replace Mandrake/RPMS with Mandrake/RPMS*
-
-2002/07/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
- mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
- mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
- mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/config.h,
- mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/version.h,
- mdk-stage1/pcmcia/cistpl.h, mdk-stage1/pcmcia/cs.h,
- mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
- mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
- mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/pcmcia/tcic.h,
- mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c:
- pcmcia is now pcmcia_ (it was to begin with a clean branch of unmodified
- sources)
-
-2002/07/05 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: make it work with "use
- strict"
- do not look at the mar files anymore, only use kernel/modules.pl (and so
- list_modules.pm)
-
- * diskdrake/interactive.pm: handle comments in fstab
-
- * fs.pm (merge_info_from_fstab): try to keep options from merged fstab IF
- the entry is for the same mountpoint AND the same device
- handle comments in fstab
-
- * share/rpmsrate: add gnupg in "4 SYSTEM", so that rpm do not *Require*
- gnupg, only suggest it very strongly :)
-
- * mdk-stage1/usb-resource/update-usb-ids.pl:
- - do not use mar files for the list of modules, use list_modules.pm
- via kernel/modules.pl instead
- - use read_pcitable to parse usbtable
-
-2002/07/05 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
- a module)
- POSIX is no more used too.
-
- * drakxtools.spec: fix typo
- fix dirs1/dirs2 mismatch
- - M-q descriptions
- - simplify file lists building
- - we can use several -f on one "%%files" line
- - add preliminary harddrake support
-
- - clean %post
-
- - bump version number
-
- * harddrake/bttv.pm:
- - remove uneeded stuff for modules ("#!/..", "use lib..", "use
- standalone", ...)
- - simplify bttv options managment:
-
- - use if_, thanks MDK::Common
-
- - s/mapn/map by using a hash at first
-
- - s/mapn{if}/map{if_}
-
- - don't read/write modules.conf here, drakx take care of that for us
-
- thus, the test program became:
-
- #!/usr/bin/perl
-
- use strict;
- use lib qw(/usr/lib/libDrakX);
-
- use standalone;
- use bttv;
- use interactive;
- use modules;
-
- modules::read_conf;
- bttv::config('interactive'->vnew());
- modules::write_conf;
- spec29: bttv configuration part of drakxtv.
- it can be used by:
-
- #!/usr/bin/perl
-
- use strict;
- use lib qw(/usr/lib/libDrakX);
-
- use standalone;
- use harddrake::bttv;
- use interactive;
-
- bttv::config('interactive'->vnew());
-
- * Makefile: don't use sed when not needed
-
- * install_steps_interactive.pm: minimize startup: only load
- harddrake::bttv if the user click on "tv
- card" field in the hw summary window
- use harddrake::bttv to let people configure their tv card if it's
- misdetected
-
- * harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_auto_install.pm,
- install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
- printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
- install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
- modules.pm
-
- * c/stuff.xs.pm: adapt to new ldetect
-
- * modules.pm: reworked, cleaned:
- - the list of modules is moved to kernel/list_modules.pm (and a few
- functions too)
- - new "add_probeall" function (similar to "add_alias")
- -> used for scsi_hostadapter and usb-interface
- - "load_multi" removed in favour of "load" which is now more powerful
- - load_thiskind renamed load_category
- - get_that_type renamed probe_category
- - %modules::drivers dropped (handled for list_modules)
- still more cleanup to come
-
- * rescue/make_rescue_img: adapt to the move all.modules ->
- kernel/all.modules and all.kernels -> kernel/all.kernels
-
- * modparm.pm: rework, cleanup, simplify and make it work
-
- * install2: create symlink list_modules.pm in current directory for
- testing purpose
-
- * Makefile: when building the tar for drakxtools, handle specially
- list_modules.pm
- adapt to the move all.modules -> kernel/all.modules and all.kernels ->
- kernel/all.kernels
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
- containing:
- - all.modules all.kernels update_kernel
- - part of perl-install/modules.pm now in kernel/list_modules.pm and
- kernel/modules.pl
- - update_kernel cleaned (it doesn't mention module names anymore, it
- is now in kernel/modules.pl)
- - cleanup Makefile
- - mdk-stage1 doesn't depend on perl-install anymore
- (more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
- * any.pm: reworked & cleaned the kernel modules part
- - adapt to new modules.pm
- - adapt to new modparm.pm
- - renamed setup_thiskind to load_category
- - renamed setup_thiskind_backend to load_category_no_message
-
- * share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04 daouda
-
- * standalone/draknet:
- - don't display clear password
-
-2002/07/04 fcrozat
-
- * share/rpmsrate: Fix GNOME2 packages
- Install urw-fonts when installing XFree
-
-2002/07/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
- * share/po/fr.po: updated French file
-
- * lang.pm: Changed some languages to defautl to utf-8
- removed X11_NOT_LOCALIZED (now Gnome2 fully supports right-to-left
- languages)
-
-2002/07/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_auto_install.pm,
- install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
- printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
- install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
- modules.pm
-
- * c/stuff.xs.pm: adapt to new ldetect
-
- * modules.pm: reworked, cleaned:
- - the list of modules is moved to kernel/list_modules.pm (and a few
- functions too)
- - new "add_probeall" function (similar to "add_alias")
- -> used for scsi_hostadapter and usb-interface
- - "load_multi" removed in favour of "load" which is now more powerful
- - load_thiskind renamed load_category
- - get_that_type renamed probe_category
- - %modules::drivers dropped (handled for list_modules)
- still more cleanup to come
-
- * getpkgs_deps, do_resize_fat: removed since unused
-
- * Makefile, rescue/make_rescue_img: adapt to the move all.modules ->
- kernel/all.modules and all.kernels -> kernel/all.kernels
-
- * modparm.pm: rework, cleanup, simplify and make it work
-
- * install2: create symlink list_modules.pm in current directory for
- testing purpose
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
- containing:
- - all.modules all.kernels update_kernel
- - part of perl-install/modules.pm now in kernel/list_modules.pm and
- kernel/modules.pl
- - update_kernel cleaned (it doesn't mention module names anymore, it
- is now in kernel/modules.pl)
- - cleanup Makefile
- - mdk-stage1 doesn't depend on perl-install anymore
- (more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
- * tools/specific_arch: simplified using MDK::Common
-
- * any.pm: reworked & cleaned the kernel modules part
- - adapt to new modules.pm
- - adapt to new modparm.pm
- - renamed setup_thiskind to load_category
- - renamed setup_thiskind_backend to load_category_no_message
-
- * share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * harddrake/TODO: add harddrake2 todo list
-
- * harddrake/data.pm: get rid of 'use vars'
- remove wait_message hack for printerdraker, better use class_discard
- harddrake2: "the return of the vengeance son"
- - harddrake/data.pm: the data structure
- - harddrake/ui.pm: the ui code
-
- - standalone/service_harddrake: the init.d service (which need a few
- polishing (timeout, ...)
-
- - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
- * harddrake/ui.pm: don't stack signals on config buttons
- - remove no more used @pid_launched
- - better GUI reactivity: don't wait for config tool to complete, just
- "fork and forget" [(c) us air force] and refuse to run another
- config tool until the first one to complete
- print "Running $configurator ..." in status bar while running a config
- tool
- - POSIX is needed for POSIX::wait
- - move strict and standalone require at top
-
- - c is unused
-
- - comment exceptions in devices loop (ie skip classes without any
- devices or any detector
-
- - optimize away $pid
- fix move from harddrake.pm to harddrake/data.pm:
-
- - menu does appear
-
- - information fields are translated from raw to english again
- harddrake2: "the return of the vengeance son"
-
- - harddrake/data.pm: the data structure
-
- - harddrake/ui.pm: the ui code
-
- - standalone/service_harddrake: the init.d service (which need a few
- polishing (timeout, ...)
-
- - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
- * detect_devices.pm: add tapes() for harddrake2
-
- * standalone/harddrake2, standalone/service_harddrake: harddrake2: "the
- return of the vengeance son"
- - harddrake/data.pm: the data structure
- - harddrake/ui.pm: the ui code
-
- - standalone/service_harddrake: the init.d service (which need a few
- polishing (timeout, ...)
-
- - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-2002/07/03 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/probing.c: fixed static definition when non static
- declaration (gcc limitation).
- added conditional code around network detection.
-
-2002/07/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/mar/mar-extract-only.c, mdk-stage1/minilibc.c,
- mdk-stage1/newt/newt.c, mdk-stage1/bzlib/bzlib.c,
- mdk-stage1/newt/listbox.c, mdk-stage1/newt-frontend.c,
- mdk-stage1/disk.c, mdk-stage1/modules.c, mdk-stage1/stage1.c,
- mdk-stage1/newt/checkboxtree.c, mdk-stage1/mar/mar-frontend.c,
- mdk-stage1/Makefile.common, mdk-stage1/url.c, mdk-stage1/newt/textbox.c,
- mdk-stage1/newt/grid.c, mdk-stage1/dhcp.c, mdk-stage1/init.c,
- mdk-stage1/automatic.c, mdk-stage1/newt/entry.c: compile with -W
-
-2002/07/02 daouda
-
- * my_gtk.pm:
- - fill a combo by default :
- gtkcombo_setpopdown_strings($combo_widget,@strings)
-
-2002/07/02 gbeauchesne
-
- * c/smp.c:
- - TODO: Update ia64 check with /proc/pal/cpuX ?
- - TODO: Update x86_64 check when SMP machines are actually available
- - Conditionalize compilation of main() with TEST macro
-
-2002/07/02 Pixel <pixel@mandrakesoft.com>
-
- * network/smb.pm: try harder to find the full list of servers available,
- using "smbclient -L" to
- check the workgroup masters
-
-2002/07/01 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm (raw_hd_mount_point): nicer default mount point
-
-2002/06/28 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm, network/smb.pm, network/smbnfs.pm:
- - add authentification in diskdrake --smb (esp. for windows NT)
- - use "credentials=" to put the passwords
- (ideas and investigations from Stew Benedict,
- integrated by Pixel, but need testing)
- Known bug: if you want to change the password when there are 2 entries
- in fstab
- using the same username=/password=, writing the credentials is done in
- random order,
- => you've got one chance in 2 that the password is changed :-(
-
- * fs.pm:
- - add authentification in diskdrake --smb (esp. for windows NT)
- - use "credentials=" to put the passwords
- (ideas and investigations from Stew Benedict,
- integrated by Pixel, but need testing)
- Known bug: if you want to change the password when there are 2 entries
- in fstab
- using the same username=/password=, writing the credentials is done in
- random order,
- => you've got one chance in 2 that the password is changed :-(
- handle spaces in mount points and devices (using \040)
-
-2002/06/27 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * standalone/drakTermServ, standalone/icons/drakTS.620x57.png: Add
- drakTermServ application and icon.
-
-2002/06/26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm, install2.pm: ensure
- licence step is asked in any case (ie. even when selectLanguage is
- automatic)
-
- * any.pm: "my" variables where needed
-
-2002/06/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po, share/po/ar.po: Updated po files
-
-2002/06/19 Frederic Lepied <flepied@mandrakesoft.com>
-
- * Makefile: corrected rules to make distributable rpms.
-
-2002/06/19 François Pons <fpons@mandrakesoft.com>
-
- * patch/patch-oem-hp.pl: added patch-oem.pl file used to generate HP
- Mandrake Linux 8.2.
-
-2002/06/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: remove a few drivers so that hd.img and network.img are
- possible with latest BOOT kernel
-
-2002/06/19 Pixel <pixel@mandrakesoft.com>
-
- * standalone/fileshareset: use "wide links = no" for exporting via samba
- (thanks to Jan Schäfer)
-
- * fs.pm: mounting of ntfs after install really mount the partition (thanks
- to Buchan Milne)
-
-2002/06/18 daouda
-
- * my_gtk.pm:
- - add gtkset_text, gtkprepend_text, gtkappend_text for entry widgets
-
-2002/06/18 Frederic Lepied <flepied@mandrakesoft.com>
-
- * Makefile.drakxtools: manage security subdir.
-
- * Makefile: added targets to build test and distribution rpms and srpms
- (localrpm,
- localsrpm, rpm, srpm).
- added security to the installed directories
-
- * pam.net_monitor, diskdrake/diskdrake.html, drakxtools.spec,
- apps.net_monitor: ripped from the srpm
-
-2002/06/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Hungarian file
-
-2002/06/17 cbelisle
-
- * standalone/draksec: added server, user and network advanced options
-
- * any.pm: draksec: customize entries for each options (lists, checkboxes
- and text boxes)
- Added user,server and network advanced options
-
- * security/msec.pm:
- - Customize entries for each options (checkboxes, text boxes and
- lists)
- added network, server and user advanced options
-
-2002/06/15 alus
-
- * share/po/pl.po: updates
-
-2002/06/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: Catalan doesn't have French fallback anymore
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/06/11 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm: added /tmp in @suggestions_mntpoints (as suggested by
- Philippe Coulon)
-
-2002/06/10 cbelisle
-
- * standalone/draksec: Add an entry for the security user email
-
- * security/msec.pm: Initial commit
-
- * any.pm: Add security user email entry in draksec
-
-2002/06/10 daouda
-
- * network/tools.pm:
- - choose country according to timezone.
-
-2002/06/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/syncrpms: english fix
-
-2002/06/10 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm: s/class/class_/ for ldetect 0.4
-
-2002/06/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * timezone.pm: remove duplicate entry in ntp_servers
-
- * interactive_gtk.pm, my_gtk.pm: split ask_browse_tree_info from
- interactive_gtk
- to my_gtk between widgets creation and real
- stuff so that we can now call it with widgets
- places differently
-
-2002/06/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated po file
-
-2002/06/05 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: adapt to new lilo
-
-2002/06/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
- * bootloader.pm: adapt to new lilo
-
-2002/06/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
- install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
- fixes thx to vincent meyer
-
-2002/06/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
- instead of weird style
- with clearall unset & auto_allocate set
-
-2002/05/29 alus
-
- * share/po/pl.po: little fixes
-
-2002/05/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_gtk.pm: remove typo fix when it's not a fix :-)
- small typo
- remove typo (hopefully really a typo ;p)
-
- * any.pm: be a bit more polite
-
-2002/05/27 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: make sure patch is always read after defcfg to take
- precedance.
-
-2002/05/27 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15 alus
-
- * share/po/Changelog: info about polish translation
-
-2002/05/14 alus
-
- * share/po/pl.po: polish finished
- updated polish translation
- polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13 alus
-
- * share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * docs/HACKING: libbzip2* and more explanations about failing compilation
-
- * mdk-stage1/Makefile, mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/probing.c:
- adapt to gcc-3.1
-
-2002/05/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
- * share/po/eu.po: small corrections
-
-2002/04/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/usb-resource/update-usb-ids.pl: support USB2 controllers as
- well
-
-2002/04/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed some machine with two present i830 CGC but only
- one in reality.
-
- * detect_devices.pm: updated usbMice to take care of device declared as
- Mouse:USB in usbtable (was
- not the case !)
-
-2002/04/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * bootlook.pm: a few english fixes
-
- * any.pm: fixes
- english fixes from v meyer
- a few english fixes thx to vincent meyer
-
-2002/04/19 alus
-
- * share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
- * share/po/hu.po: updated po file
-
-2002/04/18 alus
-
- * share/po/pl.po: 3 more long messages
- one entry
- stil working....
-
-2002/04/17 alus
-
- * share/po/pl.po: Mostly finished polish translation
- translations, fixes etc...
-
-2002/04/17 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: final candidate.
-
- * rescue/tree/etc/oem: final candidate.
- add gcc-cpp to oem install.
-
-2002/04/16 alus
-
- * share/po/pl.po: still working
- Few fixes
- Updated translation. Many strings is not yet translated...
-
-2002/04/16 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: sync with oem-prepare
- fixed stupid error.
- forget packdrake module invocation.
- fixed to support non standard rpm filename.
-
- * tools/oem-prepare: add gcc-cpp to always installed.
- disable unselection of some package (gmc, all gcc3.0 stuff).
-
-2002/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: only main version of automake
-
-2002/04/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated po file
-
-2002/04/16 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
- dialog box
-
-2002/04/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: Another small fix
- Small corrections
-
-2002/04/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/mt.po: updated Maltese file
-
-2002/04/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: small typo correction
-
-2002/04/10 warly
-
- * share/rpmsrate: autofs -> 2
-
-2002/04/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
- and iptables
- packages conflict
-
-2002/04/09 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_dos.pm, partition_table_gpt.pm,
- partition_table_empty.pm, partition_table_bsd.pm,
- partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
- error message (thanks to Brian J. Murrell)
-
-2002/04/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fixed a bunch of things
-
- * install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
- partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
- printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
- network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
- network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
- strings
-
-2002/04/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
- drakfloppy strings
-
-2002/04/07 Yves Duret <yduret@mandrakesoft.com>
-
- * standalone/drakfloppy: moving from his own rpm to drakxtools
-
- * Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04 sdupont
-
- * standalone/drakbackup: please yduret, do not commit these changes on cvs
- before to test it.
- you can say "bugs fixes" only if you have corrected some errors but not
- if you create it!
- the backup on cd was disabled because the backend is not available for
- moment.
-
- * standalone/drakfont: remove uninteresting yduret changes,
- would it be possible to know what are your "bugs fixies" ?
- to yduret: I'm the creator of this program so please do not remove my
- changes.
-
-2002/06/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
- install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
- fixes thx to vincent meyer
-
-2002/06/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
- instead of weird style
- with clearall unset & auto_allocate set
-
-2002/05/29 alus
-
- * share/po/pl.po: little fixes
-
-2002/05/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_gtk.pm: remove typo fix when it's not a fix :-)
- small typo
- remove typo (hopefully really a typo ;p)
-
- * any.pm: be a bit more polite
-
-2002/05/27 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: make sure patch is always read after defcfg to take
- precedance.
-
-2002/05/27 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15 alus
-
- * share/po/Changelog: info about polish translation
-
-2002/05/14 alus
-
- * share/po/pl.po: polish finished
- updated polish translation
- polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13 alus
-
- * share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * docs/HACKING: libbzip2* and more explanations about failing compilation
-
- * mdk-stage1/Makefile, mdk-stage1/probing.c: adapt to gcc-3.1
-
-2002/05/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
- * share/po/eu.po: small corrections
-
-2002/04/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed some machine with two present i830 CGC but only
- one in reality.
-
- * detect_devices.pm: updated usbMice to take care of device declared as
- Mouse:USB in usbtable (was
- not the case !)
-
-2002/04/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * bootlook.pm: a few english fixes
-
- * any.pm: fixes
- english fixes from v meyer
- a few english fixes thx to vincent meyer
-
-2002/04/19 alus
-
- * share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
- * share/po/hu.po: updated po file
-
-2002/04/18 alus
-
- * share/po/pl.po: 3 more long messages
- one entry
- stil working....
-
-2002/04/17 alus
-
- * share/po/pl.po: Mostly finished polish translation
- translations, fixes etc...
-
-2002/04/16 alus
-
- * share/po/pl.po: still working
- Few fixes
- Updated translation. Many strings is not yet translated...
-
-2002/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: only main version of automake
-
-2002/04/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated po file
-
-2002/04/16 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
- dialog box
-
-2002/04/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: Another small fix
- Small corrections
-
-2002/04/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/mt.po: updated Maltese file
-
-2002/04/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: small typo correction
-
-2002/04/10 warly
-
- * share/rpmsrate: autofs -> 2
-
-2002/04/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
- and iptables
- packages conflict
-
-2002/04/09 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_dos.pm, partition_table_gpt.pm,
- partition_table_empty.pm, partition_table_bsd.pm,
- partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
- error message (thanks to Brian J. Murrell)
-
-2002/04/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fixed a bunch of things
-
- * install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
- partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
- printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
- network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
- network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
- strings
-
-2002/04/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
- drakfloppy strings
-
-2002/04/07 Yves Duret <yduret@mandrakesoft.com>
-
- * standalone/drakfloppy: moving from his own rpm to drakxtools
-
- * Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04 sdupont
-
- * standalone/drakbackup: please yduret, do not commit these changes on cvs
- before to test it.
- you can say "bugs fixes" only if you have corrected some errors but not
- if you create it!
- the backup on cd was disabled because the backend is not available for
- moment.
-
- * standalone/drakfont: remove uninteresting yduret changes,
- would it be possible to know what are your "bugs fixies" ?
- to yduret: I'm the creator of this program so please do not remove my
- changes.
-
-2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
- doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
- doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/02 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: do not have "root=" with no root (needed for memtest)
- (thanks to Borsenkow Andrej)
-
- * share/rpmsrate: add tmpwatch (since it is not mandatory any more)
-
-2002/03/30 Yves Duret <yduret@mandrakesoft.com>
-
- * standalone/drakbackup, standalone/drakfont: bugs fixes, code clean up,
- more mdkish..
-
-2002/03/26 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Fixed several problems related to HP
- multi-function devices:
- - Parallel multi-function devices worked only on the first (onboard)
- parallel
- port.
- - HP LaserJet 2200 needs HPOJ for printing via USB.
- - For the HP OfficeJet D series the scanning instructions were not
- shown.
- - HPOJ does not work with HP PhotoSmart 10xx, 11xx, and 12xx.
-
-2002/03/22 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: cleaned gtkpowerpack
-
-2002/03/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: use /root rather than /tmp for some temp files (security
- suxx)
-
-2002/03/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/list: rpm 4.0.4
-
- * mdk-stage1/network.c: don't save DHCP_HOSTNAME if the value is void
-
-2002/03/20 sdupont
-
- * standalone/drakfont: fixing problems
- exchanging: ttmkfdir by /usr/X11R6/bin/mkttfdir
- which generate correct fonts.dir
-
- * standalone/drakbackup: remove backup on cd
-
-2002/03/20 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv: use log for what is not related to explanations
-
-2002/03/19 François Pons <fpons@mandrakesoft.com>
-
- * tools/updatehdlist: take care of commercial medium (not syncable).
-
-2002/03/19 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv:
- - default tv norm is pal rather than ntsc (because of alphabetical
- sort) since it's the most used tv norm
- - figure out tv norm & country (aka frequency table) from locales
-
- - add a hash based on lang in order to do this
-
- - add --no-guess if one doesn't want drakxtv to automagically guess tv
- norm and geographic area through locales (lang.pm)
-
- - log with standalone::explanations:
-
- - guessed values from locales: language, tv norm and country
-
- - runned command to scan for tv channels
-
- - ~/.xawtv creation
-
-
- - s/bcast/broadcast/ in displayed messages
-
- - add -h and --help support
-
-2002/03/18 dam's <damien@mandrakesoft.com>
-
- * install_gtk.pm, mouse.pm, my_gtk.pm: corrected create_xpm API
-
-2002/03/18 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: fixed to support rpm filename incoherent to standard
- naming for commercial
- packages (commercial are *really* shit (almost, for the hope) all the
- time ?)
-
-2002/03/16 dam's <damien@mandrakesoft.com>
-
- * network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
- connection.
-
-2002/03/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/ar.po: updated po file
-
-2002/03/16 Pixel <pixel@mandrakesoft.com>
-
- * network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/16 dam's <damien@mandrakesoft.com>
-
- * network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
- connection.
-
-2002/03/16 Pixel <pixel@mandrakesoft.com>
-
- * network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/15 fabman
-
- * share/po/es.po: updated bad lilo/grub/yaboot translation
- updated spanish translations
-
-2002/03/15 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: force mkinitrd *really* for bootsplash.
- force initrd regeneration for oem on some case (maybe the cause of
- bootsplash
- perturbation, as maintainer don't even known why it is running correctly
- :-)
-
- * pkgs.pm: do not try to get synthesis if hdlist is available as an handle
- on file (typical
- for updates).
-
- * share/rpmsrate: remove doublon on NVIDIA_nforce.
- update to 6mdk for NVIDIA_nforce*
-
-2002/03/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: yet again add some dropped entities from drakx-help.xml
- add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
-
- * install_steps_interactive.pm:
- - remove obsolete code
- - the result is to use directly $availableC instead $size2install
- which was min($availableC, $max_size)
-
-2002/03/15 dam's <damien@mandrakesoft.com>
-
- * share/po/ja.po: reverted ' \n' from pablo because I managed to correct
- the way we wrap for the advertising
-
- * install_steps_gtk.pm: submitting widget instead of style (style/font
- initialization bug from gtk
-
- * my_gtk.pm: corrected get_text_coord : widget instead of style, and
- handling of ugly language (/ja|zh/)
-
-2002/03/15 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: do not try to get synthesis if hdlist is available as an handle
- on file (typical
- for updates).
-
- * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
- @euro appended for 8.1).
-
-2002/03/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
- ones
-
-2002/03/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: yet again add some dropped entities from drakx-help.xml
- add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
- s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged)
-
- * keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15 dam's <damien@mandrakesoft.com>
-
- * share/po/ja.po: reverted ' \n' from pablo because I managed to correct
- the way we wrap for the advertising
-
- * install_steps_gtk.pm: submitting widget instead of style (style/font
- initialization bug from gtk
-
- * my_gtk.pm: corrected get_text_coord : widget instead of style, and
- handling of ugly language (/ja|zh/)
-
-2002/03/15 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
- @euro appended for 8.1).
-
-2002/03/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
- ones
-
-2002/03/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
- drakx-help.xml not merged)
-
- * keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15 dam's <damien@mandrakesoft.com>
-
- * share/po/ja.po: reverted ' \n' from pablo because I managed to correct
- the way we wrap for the advertising
-
- * install_steps_gtk.pm: submitting widget instead of style (style/font
- initialization bug from gtk
-
- * my_gtk.pm: corrected get_text_coord : widget instead of style, and
- handling of ugly language (/ja|zh/)
-
-2002/03/15 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
- @euro appended for 8.1).
-
-2002/03/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
- ones
-
-2002/03/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
- drakx-help.xml not merged)
-
- * keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po: updated po file
-
-2002/03/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakxtv: english
-
-2002/03/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/da.po, share/po/no.po: updated po files
-
- * share/po/eu.po: updated po file
-
- * lang.pm: changed LANGUAGE for basque
-
- * share/po/ja.po: added \n in advertising
-
-2002/03/14 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: CHARSET"iso-8859-1" and CHARSET"iso-8859-15" is no good
- for english which has CHARSET"C", adding it
-
- * share/rpmsrate.server: obsolete
-
-2002/03/14 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv:
- - add SECAM to france description to ease user comprehension
- - remove unused variables
- - revert gc & dam's (also known as the usual suckers) garbage
- who'ven't the hardware to test:
-
- - explain in source why we don't try to install xawtv (see below)
-
- - just display a message if xawtv isn't installed
- since drakx should have installed it
-
- - let it be runned as root again (how many times i'm
- supposed to restore this behaviour)
-
- - retest with a tv card
-
- - use %ENV rather than relying on shell ~ expansion
-
- - if tv card wasn't detected, ask the user to spam us
-
- - factorize $in->exit() out of scan4tvchannels()
-
- - add to TODO list the possibility to install xawtv if needed
-
- - check scantv return value and display an error message
-
- - also if the wrapper was runned on console, display a nice
- message saying one can now run xawtv under X11
-
-2002/03/14 warly
-
- * share/rpmsrate: add commercial apps
-
-2002/03/14 Yves Duret <yduret@mandrakesoft.com>
-
- * standalone/logdrake: fix some bug
- fix * bug in field matching/ not matching
-
-2002/03/13 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: new gfx
-
-2002/03/13 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: sync with oem (removed mach32 server).
- sync with oem.
- remove bzflag.
- synced with oem script.
-
- * rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
- remove Mach8 and Mono driver for oem only.
- remove bzflag.
- fixed closure selection on sub groups (like 3D),
- moved some big package out of oem,
- minor fixes.
-
-2002/03/13 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: new gfx
-
-2002/03/13 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: sync with oem (removed mach32 server).
- sync with oem.
- remove bzflag.
- synced with oem script.
-
- * rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
- remove Mach8 and Mono driver for oem only.
- remove bzflag.
- fixed closure selection on sub groups (like 3D),
- moved some big package out of oem,
- minor fixes.
-
-2002/03/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po, share/po/eu.po: updated po files
-
-2002/03/13 warly
-
- * share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/13 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed closure selection on sub groups (like 3D),
- moved some big package out of oem,
- minor fixes.
-
- * tools/oem-prepare: synced with oem script.
-
-2002/03/13 gbeauchesne
-
- * share/rpmsrate:
- - Add openoffice with weight = 2
-
-2002/03/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po, share/po/vi.po, share/po/cs.po, share/po/hu.po,
- share/po/eu.po: updated po files
-
- * lang.pm: small console font changes
- set default console fotns for latin1/0 to lat1-16 and lat0-16;
- the font lat0-sun16 is missing some chars of iso-8859-1/15 !
-
-2002/03/13 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: add gcc and gcc-c++ in @preferred
-
-2002/03/13 warly
-
- * share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/12 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: onboot option only in expert mode
- corrected domainname bug; added onboot option
-
-2002/03/12 dam's <damien@mandrakesoft.com>
-
- * standalone/drakbackup, standalone/drakfont: minor bug correction
-
- * standalone/net_monitor: greater timeout
-
- * network/tools.pm, network/netconnect.pm: changed timeout for testing
- internet connection
-
-2002/03/12 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: remove synthesis if not found (filesize is 0)
-
- * Xconfigurator.pm: avoid Utah GLX only if > 800MB, not if <= 800MB (!)
-
- * install_any.pm: added fix to support update hdlist renaming (ie hdlist
- of update are always hdlist.cz).
- remove old synthesis file, to make sure gzip can build a new one.
-
- * share/rpmsrate: added nforce support (hack by adding kernel version
- inside)
-
-2002/03/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
- * share/po/ga.po: fixed email address
-
- * share/po/zh_TW.po: updated po file
-
-2002/03/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, bootloader.pm: don't have "quiet" boot in the server
- meta_class
-
- * pkgs.pm: "fam" is not a naughtyServers
- remove the old "boa" comment
- adapt naughtyServers for 8.2
-
-2002/03/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: a few missing translations
-
-2002/03/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt.po, share/po/ga.po, share/po/de.po, share/po/az.po,
- share/po/pt_BR.po, share/po/nl.po, share/po/ja.po, share/po/id.po,
- share/po/ar.po, share/po/mt.po, share/po/eo.po, share/po/da.po: updated
- po files
-
- * share/po/eu.po, share/po/it.po: updated po files
- merged with new strings from manuals
-
- * share/po/DrakX.pot, share/po/fr.po: merged with new strings from manuals
-
- * share/po/be.po, share/po/bg.po, share/po/et.po, share/po/hr.po,
- share/po/ko.po, share/po/is.po, share/po/pl.po, share/po/no.po,
- share/po/fi.po, share/po/el.po, share/po/lt.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/bs.po,
- share/po/cs.po, share/po/af.po: updated po files (finished merging with
- manual strings)
- updated po files
-
- * share/po/hu.po: updated po files
- updated po files
-
- * share/po/cy.po: updated po file
- updated po files
-
- * share/po/es.po: updated Spanish
-
- * share/po/sp.po, share/po/zh_CN.po, share/po/sr.po, share/po/tr.po,
- share/po/ru.po, share/po/wa.po, share/po/sv.po, share/po/th.po,
- share/po/sk.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
- share/po/ro.po, share/po/zh_TW.po: updated po files (finished merging
- with manual strings)
-
-2002/03/11 dam's <damien@mandrakesoft.com>
-
- * Makefile.config: added drakproxy
-
- * standalone/drakxtv: added embedded mode
-
-2002/03/11 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: for updates, make tree as flat instead in order to
- see all packages.
-
-2002/03/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: webmin: 3
-
- * standalone/drakxtv:
- - install xawtv when necessary instead of
- telling people to use urpmi (titi sucks)
- - prints out a message when no tv card
- has been detected
-
- * share/po/fr.po: small ortograf
-
-2002/03/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po, share/po/it.po, share/po/eu.po: merged with new strings
- from manuals
-
- * share/po/DrakX.pot: merged with new strings from manuals
- updated GErman file
-
- * share/po/de.po: updated GErman file
-
- * share/po/es.po: updated Spanish
-
-2002/03/11 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (fullname2mouse): workaround when "1 Button" is not found
-
- * install_steps.pm, install2.pm:
- - default security level now set in miscellaneousBefore
- - default security level is 3 in meta_class server
-
- * install_any.pm:
- - fix the setting of compssUsersChoices in auto_install when it is
- empty
- - set the default compssUsersChoices adapted to the server meta_class
-
- * share/rpmsrate: remove phpgroupware from OFFICE (since it appeas twice,
- the rate is 4, and it requires apache, and ...)
-
- * Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
- * install_steps_gtk.pm:
- - remove the hack for not displaying Utilities in classic meta_class
- - new compssUsers groups for the server meta_class
-
- * share/compssUsers: remove "Utilities" here instead of removing it
- hackily in install_steps_gtk
-
- * share/compssUsers.server: fix the path=Utilities for the Utilities
- section
-
-2002/03/11 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Small text fix.
- Security fix: Give a warning that SMB passwords can easily be revealed
- by normal users when printing on a Windows-hosted printer is set up.
-
- * detect_devices.pm: Reverted parts of the last change, they broke in
- non-DevFS environments (e. g. during installation).
-
-2002/03/11 warly
-
- * share/rpmsrate: add bwbserver_linux in rpmsate for BeeWeb server
-
- * share/compssUsers.server: remove ICEWM choice
-
-2002/03/11 Yves Duret <yduret@mandrakesoft.com>
-
- * tools/cvslog2changelog.pl: added yduret entry in user.
-
-2002/03/11 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: add Rage Mobility as bad card for XF4 (was already bad
- card for XF3) (gégé report).
-
-2002/03/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help file
-
- * share/po/de.po, share/po/DrakX.pot: updated GErman file
-
-2002/03/11 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/interactive.pm (Mount_point): when files exist in the chosen
- mount point, propose migration
-
- * install_steps_interactive.pm: search /commercial/i instead of
- /Application/ before showing the commercial license
-
- * standalone/drakboot, bootloader.pm: fix Stew sucks
-
- * install2.pm, install_steps.pm:
- - default security level now set in miscellaneousBefore
- - default security level is 3 in meta_class server
-
- * install_steps_gtk.pm:
- - remove the hack for not displaying Utilities in classic meta_class
- - new compssUsers groups for the server meta_class
- search /commercial/i instead of /Application/ before showing the
- commercial license
-
- * install_any.pm:
- - fix the setting of compssUsersChoices in auto_install when it is
- empty
- - set the default compssUsersChoices adapted to the server meta_class
-
- * Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
- * share/compssUsers: remove "Utilities" here instead of removing it
- hackily in install_steps_gtk
-
- * share/compssUsers.server: fix the path=Utilities for the Utilities
- section
-
-2002/03/11 yduret
-
- * standalone/scannerdrake: re-re-re-re-re-re-uncomment the pkgs check
- line.
-
-2002/03/10 chipaux
-
- * share/po/fr.po: Corrected few typo mistakes.
-
-2002/03/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps.pm: gcize damienization
-
- * share/rpmsrate: put userdrake together with drakconf so that
- userdrake is not missing (till)
-
-2002/03/10 siegel
-
- * share/po/help_xml2pm.pl: added tag filename
-
- * any.pm: added missing i18n _()
-
- * share/po/de.po: update
- and still fixes ...
- updates
- update
-
-2002/03/10 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Protect the Star Office/OpenOffice.org configuration against
- manual changing of the "update-alternatives" assignment of the "lpr"
- command.
-
- * detect_devices.pm: Made USB printer auto-detection more stable and
- reliable.
-
-2002/03/10 yduret
-
- * standalone/scannerdrake: added ASK DEVICE support
-
- * scanner.pm: added ASK support for more interactiveness during
- configuration
-
-2002/03/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: comply better to ClientID stuff
-
-2002/03/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po: updated po file
-
-2002/03/09 yduret
-
- * standalone/scannerdrake: added sum up at the end
- uncomment line that checks if sane rpm is installed or not (thx gc).
- i sux,
-
-2002/03/08 dam's <damien@mandrakesoft.com>
-
- * standalone/drakproxy: drakproxy rewritten
- working drakproxy
-
- * install_steps.pm: corrected network up/down when network install
-
- * standalone/drakfont: ergonomy changed to fit in mcc
- corrected network up/down when network install
-
- * network/network.pm: proxy settings corrected
-
-2002/03/08 fabman
-
- * share/po/es.po: updated spanish translation
-
-2002/03/08 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed allowNVIDIA_rpms to take care of new kernel naming
- conventions.
-
- * standalone/XFdrake: fixed NVIDIA support to use newer kernel naming
- conventions.
-
- * Xconfigurator.pm: fixed possible additional XFree packages not installed
- if server is already
- installed.
-
-2002/03/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: missing translations + a few changes
-
- * mdk-stage1/probing.c: have 4 seconds of delay for usb stuff
- to show up rather than seconds
-
-2002/03/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po, share/po/it.po: updated po files
-
- * share/po/es.po: corrected typo
-
- * share/po/da.po: updated Danish file
-
- * lang.pm, share/locales-skeleton.tar.bz2: Added symlinks in
- locales-skeleton so non primary chinese encodings
- can work
-
- * share/po/ar.po: updated po file
-
- * share/po/cy.po: removed the "translation" of licence, it was random
- text.
-
-2002/03/07 dam's <damien@mandrakesoft.com>
-
- * share/po/fr.po, modparm.pm: corrected
-
-2002/03/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/newt-frontend.c: english fix thx to till & phil
-
-2002/03/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po: updated po file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2002/03/07 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: removing quota choices for reiserfs
-
-2002/03/07 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: make gc happy
-
- * modparm.pm, share/po/fr.po: corrected
-
- * standalone/draknet: corrected network/internet restart when already
- connected
-
- * network/netconnect.pm: corrected bad previous behaviour
-
- * standalone/drakfont: corrected bad system command
-
- * share/advertising/02-internet_icon.png,
- share/advertising/05-contcenter_icon.png,
- share/advertising/10-MDKexpert_icon.png, share/advertising/06-user.pl,
- share/advertising/08-games.pl, share/advertising/02-internet.pl,
- share/advertising/03-graphic_icon.png, share/advertising/07-server.pl,
- share/advertising/12-MDKstore_icon.png,
- share/advertising/06-user_icon.png,
- share/advertising/07-server_icon.png, share/advertising/09-MDKcampus.pl,
- share/advertising/10-MDKexpert.pl, share/advertising/05-contcenter.pl,
- share/advertising/04-develop.pl,
- share/advertising/09-MDKcampus_icon.png,
- share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
- share/advertising/04-develop_icon.png,
- share/advertising/08-games_icon.png: changed icon sizes
-
-2002/03/07 fcrozat
-
- * share/rpmsrate: Evolution is not dependent on GNOME selection (not
- require gnome-core)
-
-2002/03/07 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: avoid destroying some files in /etc.
-
- * install_steps_interactive.pm: fixed package tree with a given medium.
-
- * any.pm: fix autologin sometimes activated without user intervention.
-
-2002/03/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: generate_automatic_stage1_params: also save
- the interface number in case the machine will
- have several interfaces; clean code a bit
-
- * mdk-stage1/network.c: better error msg regarding pcmcia net
- adapters supported either with pcmcia.img
- or network.img (amaury sucks)
-
- * install_steps_auto_install.pm: in replay mode, since
- $o->{interactiveSteps}
- exists, we can't simply ||= @graphical_steps,
- we need to push to ensure that the
- @graphical_steps is always honoured
-
- * standalone/drakgw:
- - call net_monitor to disable internet
- connection before network-restart
- - user return value when status'ing the
- initscripts rather than grepping their
- text output
-
- * modules.pm: try to avoid segfaulting probeall stuff
- add ns83820 gigabit (goes to other.img)
-
- * rescue/rescue-doc: english fixes thx to phil
-
-2002/03/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * standalone/drakfont: Added a missing _( ) around a text
-
- * share/po/vi.po, share/po/cy.po, share/po/hu.po, share/po/id.po: updated
- po files
-
- * share/po/ko.po, share/po/ca.po, share/po/tr.po: commented out the
- translations using argument switching (not yet handled by DrakX)
-
- * bootlook.pm, standalone/drakboot: i18n changes
-
- * keyboard.pm: corrected the locale->keyboard list building
- make keyboard selection choose first the 5 first chars of lang;
- then the 2 first chars;
-
- * share/po/eu.po: commented out the translations using argument switching
- (not yet handled by DrakX)
- updated po file
-
-2002/03/07 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix fileshare custom config
- fix *some* stew errors
-
- * bootloader.pm: "--timeout=" must be after terminal
- add --timeout=... for "terminal serial ..." line in grub's menu.lst
- fix *some* stew errors
-
- * install_any.pm: don't have the adsl & modem passwords in report.bug
-
- * detect_devices.pm (zips__faking_ide_scsi): fix returned value in
- standalone
- (getSCSI): don't call isFloppyOrHD for ZIPs (lowers the number of kernel
- error when there is no floppy)
-
- * fs.pm: removing quota choices for reiserfs
-
-2002/03/07 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * any.pm, bootlook.pm, standalone/drakboot, bootloader.pm: drakboot
- functionality for PPC
-
-2002/03/07 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed bug of network not being started by Printerdrake
- during installation.
-
-2002/03/07 warly
-
- * share/compssUsers.server, share/compssUsers, share/rpmsrate: update
- server, merge with normal rpmsrate
-
-2002/03/06 dam's <damien@mandrakesoft.com>
-
- * standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po, share/po/no.po, share/po/cy.po: updated po file
-
-2002/03/06 Pixel <pixel@mandrakesoft.com>
-
- * standalone/fileshareset (nfs_exports::update_server): ensure portmap is
- running
-
-2002/03/06 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: corrected font stuff
-
- * standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: no 3D with Utah GLX (XF 3.3) if more than 800 MB.
-
- * pkgs.pm: fixed error when using multiple removable media and user
- aborted installation
- (for some other error) and hdlists cannot be retrieved.
- add save of synthesis too when partitions are reformated, so that urpmi
- is happy after.
- fixed when hdlist gives no new package (new name) but only obsoleted
- package or
- updated package, ie security updates may appreciate.
-
- * install_any.pm: update for newer pkgs module (fix for abort during
- installation).
-
- * rescue/tree/etc/oem: allow oem script to be executable from standard cd
- set (powerpack or other).
-
-2002/03/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po: updated po file
- updated pot file
-
- * share/po/fr.po, share/po/cy.po, share/po/id.po, share/po/zh_TW.po:
- updated pot file
- updated some po files
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2002/03/06 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: add @preferred libxpm4
-
- * lang.pm: fix typo in %xim (for chineese)
- - create the kde share/config's directory, so that kde config files
- are created in any case
- - in user_only localedrake, ensure the /etc/sysconfig/i18n is taken
- into account when ~/.i18n doesn't exist (thanks to F.Crozat)
-
- * install_any.pm: ensure the fstab is kept on upgrade
- (g_auto_install): use "interactiveSteps" field instead of pushing in
- @install_steps_auto_install::graphical_steps
-
- * standalone/localedrake: when called by kcontrol with --apply, don't
- modify kde config files, kcontrol takes care of it more nicely
-
- * diskdrake/interactive.pm: translate the actions
- choose to activate crypto. type password. unselect encryption. Select
- encryption again, you were not asked for password. Fixed
- use formatError
-
- * bootloader.pm (add_append): don't add to entries of type 'other'
-
- * devices.pm (find_free_loop): fix
-
- * install_steps_interactive.pm, install_steps.pm: ensure the fstab is kept
- on upgrade
-
- * fsedit.pm: do not allow encrypted /var
-
-2002/03/06 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv: print an error message if xawtv isn't installed
- fix conflict between i18n and complete signal handler (ie return key
- and not value)
-
-2002/03/06 warly
-
- * share/rpmsrate: remove abiword
-
-2002/03/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pcmcia_/probe.c: an old sucking PCI card needs oldskool
- i82365 :-((, ugly patch
-
-2002/03/05 warly
-
- * share/rpmsrate: add Fred Bastok modif
- remove too many duplicate in i18n packages that are now automatically
- added
-
-2002/03/05 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * modules.pm: Add USB2 controller
-
-2002/03/05 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: corrected expert option in install mode
- added expert mode
-
- * my_gtk.pm: greater interstice
-
- * modparm.pm: cosmetic
- gzipped modules handled
-
-2002/03/05 fcrozat
-
- * share/rpmsrate: Install xlockmore when installing gnome, since
- xscreensaver can't lock
- root desktop..
-
-2002/03/05 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: deactivate v4l module if DRI is enabled and r128
- driver used.
-
- * install_steps.pm: added auto restore of some files (/etc/profile) needed
- by upgrade (from .rpmnew).
- added log for hasNetwork (so that we can understand why installUpdates
- do nothing).
-
- * crypto.pm: avoid trying to find hdlist-updates.cz in existing medium
- (instead of ftp one).
-
- * fs.pm: fixed hd install to allow using specific directory.
-
- * install_any.pm: fix duplicate synthesis.hdlist.xxx file present in
- /var/lib/urpmi, and
- furthermore uncompressed :-(
- fixed possible bug when generating synthesis file for urpmi
- installation.
-
-2002/03/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c, mdk-stage1/dhcp.h, mdk-stage1/network.c: save
- dhcp_hostname for stage2
-
- * install_any.pm: fix bug in generating automatic stage1
- params for http
-
- * modules.pm: aironet core sucking thing
-
-2002/03/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sr.po, share/po/sp.po: updated po files
-
-2002/03/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: if mem=nopentium is given on cmdline, have it after
- install
-
- * modules.pm (extract_modules): created (was done in load_raw)
-
-2002/03/05 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator.pm: use UseFBDev for r128 - PPC
-
-2002/03/05 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added support for HP's newest MF devices: HP OfficeJet
- D series, HP LaserJet 33xx MFP.
- Fixed bug of printerdrake sometimes assuming the user has an MF device
- when he has typed the device file name in the expert mode.
-
-2002/03/05 yduret
-
- * bootlook.pm: fix nobody bug
-
- * standalone/logdrake: mail alert: use eval {} to catch wizcancel
-
-2002/03/04 dam's <damien@mandrakesoft.com>
-
- * modparm.pm: corected weirdness, I suck
-
-2002/03/04 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fix scroll total to match reality.
- fixed interpretation of size of package when doing an install (this can
- be
- severe, need testing).
-
-2002/03/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cy.po, share/po/id.po: updated po file
-
-2002/03/03 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm (gtkicons_labels_widget): since style is not set either, use
- the widget and ask it the style->font. This *works*
- (gtkicons_labels_widget): pass the style instead of directly passing the
- font
-
-2002/03/03 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Let Star Office/OpenOffice.org configuration corrcet a bug
- in the PostScript produced by these programs so that the Euro symbol is
- printed correctly.
-
-2002/03/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated po file
-
-2002/03/02 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm: better name for windobe new 0x42 special id (their
- own LVM marker)
-
- * detect_devices.pm: better jaz detection (thanks to Randy Welch)
-
-2002/03/02 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po, share/po/da.po, share/po/vi.po, share/po/hu.po: updated
- po files
-
- * share/po/tr.po: updated po file
-
-2002/03/02 Pixel <pixel@mandrakesoft.com>
-
- * share/list: add lvreduce & lvextend
-
- * detect_devices.pm: fix ide zip name when there are already some other
- SCSI drives
- ZIPs and Jazz's are not floppies
-
- * diskdrake/interactive.pm (Resize): ensure we call lv_resize from lvm and
- adjust_* for normal partitions, even for destructive resizes
-
-2002/03/02 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/01 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: fix gc's bulshit
-
-2002/03/01 dam's <damien@mandrakesoft.com>
-
- * services.pm: corrected translation used for shell command
-
- * my_gtk.pm: style & font correction
-
-2002/03/01 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
- * rescue/tree/etc/oem: added ext3 support.
-
- * share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
- * install_any.pm: reset correct setup_postinstall_rpms calling.
- removed some card where 3D is not installed by default:
- Riva128, Radeon 8500 and Rage Mobility card.
- removed staling debug code.
- fixed bad copied package (if one is not found).
-
- * tools/oem-prepare: added handling of newer rpmsrate format with INSTALL
- category.
-
- * pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
- handling.
- only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: a few missing trads
- please translators, keep two newlines when
- there are two newlines in original string,
- it's on purpose
-
-2002/03/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated po files
-
- * share/po/fr.po: fixed two typos
- small corrections (non breakable spaces)
-
-2002/03/01 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
- Xdrakres completly obsolete)
-
- * standalone/localedrake: restrict localedrake to installed lang
-
- * lang.pm: restrict localedrake to installed lang
- add 'C' in %charset2kde_font (so that english has normal fonts)
-
- * bootloader.pm:
- - do not indent "disk=... bios=..."
- - $lilo->{first_hd_device} can be used to tell which drive is the
- first one
- for the BIOS. Useful when the bootloader is installed on a partition and
- not
- on the MBR.
- read "disk=/dev/xxx bios=0x8x" and save it
-
- * any.pm: restrict localedrake to installed lang
- ask which hard drive is the booting one when there is mixed kind of
- drives
- (scsi+ide, ide2+ide) and the bootloader is not installed on MBR
-
-2002/03/01 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Reduced the paths to search for Star/Open Office, on systems
- without these applications installed the search needed a significant
- time.
-
-2002/03/01 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
- * share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
- * install_any.pm: removed staling debug code.
- fixed bad copied package (if one is not found).
-
- * pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
- handling.
- only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: add hostname/domain in dhcp negociation,
- thx to david@eastcott.net
-
- * share/po/fr.po: please translators, keep two newlines when
- there are two newlines in original string,
- it's on purpose
-
-2002/03/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po, share/po/zh_TW.po, share/po/hu.po: updated po files
-
-2002/03/01 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
- Xdrakres completly obsolete)
-
- * detect_devices.pm: add is_a_recent_computer()
-
- * any.pm: call dcop as user
-
- * lang.pm: add 'C' in %charset2kde_font (so that english has normal fonts)
- switch en_GB, *_CH, da, es@tradicional and wa to iso-8859-15
-
- * bootloader.pm: read "disk=/dev/xxx bios=0x8x" and save it
-
- * mouse.pm: special case for non detected usb interface on a box with no
- mouse.
- we *must* find out if there really is no usb, otherwise the box may
- not be accessible via the keyboard (if the keyboard is USB)
- the only way to know this is to make a full pci probe
-
-2002/02/28 dam's <damien@mandrakesoft.com>
-
- * standalone/drakbackup: bugfixs
- corrected translation for crontab
-
- * modparm.pm: corrected modinfo path for isa modules during install
-
-2002/02/28 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: try to fix if no chosen width has been found.
- removed Radeon 8500 from DRI capable cards.
-
- * rescue/tree/etc/oem: added curl as a bonus for oem install (it will be
- used by urpmi)
- added a2ps as a bonus (it fetch tetex where oem limited disk usage do
- not agree
- a lot).
- fixed bad copy of install packages.
-
- * tools/oem-prepare: added curl as a bonus for oem install (it will be
- used by urpmi)
- added a2ps as a bonus (it fetch tetex where oem limited disk usage do
- not agree
- a lot).
- fixed bad copy of INSTALL packages.
-
-2002/02/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install2.pm: more precise msg when can't access kernel modules because
- we still have many dumb people on cooker asking what's going on
-
- * install_steps_interactive.pm: small english fix
-
-2002/02/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/de.po, share/po/no.po: updated po files
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
- * share/po/sv.po: updated Swedish file
- updated pot file
-
-2002/02/28 Pixel <pixel@mandrakesoft.com>
-
- * rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
- "no" could be either "no-dvorak" or "no-latin1")
-
- * keyboard.pm (loadkeys_files): ensure each file appear only once
-
-2002/02/28 siegel
-
- * share/po/de.po: and another part of updates
- updates
-
-2002/02/28 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * share/po/fr.po: last translation but not least.
- further updates
- update french translation
-
-2002/02/28 dam's <damien@mandrakesoft.com>
-
- * share/themes-marble3d.rc: rechanged bg for camille
-
- * standalone/drakbackup: corrected translation for crontab
-
-2002/02/28 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed bad copy of install packages.
-
- * tools/oem-prepare: fixed bad copy of INSTALL packages.
-
- * Xconfigurator.pm: removed Radeon 8500 from DRI capable cards.
-
-2002/02/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/aliases, rescue/list: include /sbin/fsck.ext3 since our users are
- so dumb
-
-2002/02/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_TW.po: updated Chinese file
-
-2002/02/28 Pixel <pixel@mandrakesoft.com>
-
- * rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
- "no" could be either "no-dvorak" or "no-latin1")
-
- * keyboard.pm (loadkeys_files): ensure each file appear only once
-
- * bootloader.pm: add "nowarn" in lilo.conf
-
- * install_steps.pm, fs.pm: use the "soft" option by default for /mnt/nfs
- and for "diskdrake --nfs"
-
-2002/02/28 sdupont
-
- * standalone/drakfont: including 'su' mode on drakfont.
-
-2002/02/28 siegel
-
- * share/po/de.po: updated missing strings
-
-2002/02/28 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Re-activated function to specify a CUPS server in
- another network and to switch to manual CUPS configuration.
- - Fixes/Improvements on Star Office/Open Office support:
- o When one switches the spooler, the entries of the printers under the
- old spooler are removed from Star Office/Open Office
- o Printers on remote CUPS servers (which are known through
- broadcasting)
- can be added to Star Office/Open Office
-
- * share/rpmsrate.server, share/rpmsrate: Added "curl" to install section,
- it is needed by printerdrake.
-
- * printer.pm:
- - Fixes/Improvements on Star Office/Open Office support:
- o When one switches the spooler, the entries of the printers under the
- old spooler are removed from Star Office/Open Office
- o Printers on remote CUPS servers (which are known through
- broadcasting)
- can be added to Star Office/Open Office
-
-2002/02/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: updated Basque file
-
-2002/02/27 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm:
- - Improved fully automatic adding of printer queue:
- o Ask for a queue name if more than one printer is detected
- o Let user confirm the model automatically chosen from the database
- o Set correct paper size according to the language/country
- - When one chooses a "CUPS + GIMP-Print" driver now all important
- options
- are displayed directly (without needing "Advanced" button).
- - Made less warning appearing on the console from where "printerdrake"
- was
- called.
-
-2002/02/27 fabman
-
- * share/po/es.po: converted to UTF-8
-
-2002/02/27 François Pons <fpons@mandrakesoft.com>
-
- * crypto.pm: fix missing version listed when doing update.
-
-2002/02/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: a few translations
-
- * mdk-stage1/rescue-gui.c, rescue/restore_ms_boot, rescue/list.i386,
- rescue/make_rescue_img: add "restore Windows Boot Loader" to rescue
-
- * install_steps_interactive.pm: formatAlaTex for congratz msg
- xfs + bootdisk = warning_msg
-
- * share/rpmsrate: flightgear is now fully lowercase
- glaxium
-
- * mdk-stage1/pcmcia_/probe.c: add Keld Jřrn Simonsen <keld@dkuug.dk>'s O2
- Micro
- CardBus controller, and two other PCI entries which
- have close descriptions
-
- * mdk-stage1/pcmcia_/merge_from_pcitable: misc
- also report when pcitable is "too old"
- write a short perl program to easily merge new
- cardbus controllers from pcitable into probe.c
-
-2002/02/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eu.po: updated po file
-
-2002/02/27 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: simplify pyDict
-
- * install_steps_interactive.pm: ensure a keyboard is only once available,
- either in advanced or normal, but
- not in both (tx2fredl)
-
- * share/po/da.po:
- - it is UTF-8
- - fix line splitting
-
- * lang.pm: workaround iso-8859-1 charset based languages not displayed
- correctly at install
- - %lang2country is the authority, so if the country given by
- %lang2country doesn't exist in KDE, return C
- - fix be,sp,sr
- - s/def/default/ (typo)
- - add some utf kde fonts
-
-2002/02/27 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * share/po/fr.po: update french translation
-
- * standalone/drakxtv:
- - simplify an ACTION||fallback;fallback into ACTION;fallback
- - print a message saying that xawtv can be used now at the end of the
- channels auto-probing in case of direct use from cl and not from
- XawTV wrapper (from qa test) aka let the world be better :-)
-
- * share/po/br.po: minor update
- update brezhoneg translation
-
-2002/02/26 dam's <damien@mandrakesoft.com>
-
- * modparm.pm: corrected bad sprintf
-
-2002/02/26 fabman
-
- * share/po/es.po: updated spanish translations
-
-2002/02/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: version 8.2
-
-2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po, share/po/sv.po, share/po/hu.po: updated po files
-
-2002/02/26 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
- diskdrake/interactive.pm: propose some mount points for
- removable/nfs/smb
-
- * install_steps_interactive.pm: if no sound card are detected AND the user
- selected things needing a sound card, propose a special case for ISA
- cards
-
- * share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
- when asked for a ISA
- sound card)
-
- * my_gtk.pm (@icon_paths): ease testing
-
-2002/02/26 siegel
-
- * share/po/de.po: updates
-
-2002/02/26 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: corrected ttf/TTF and xfs restart
-
- * share/logo-mandrake.png: new logo
-
-2002/02/26 fabman
-
- * share/po/es.po: updated spanish translations
-
-2002/02/26 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix translation of test program.
-
-2002/02/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/libstdio/fclose.c: don't segfault when fclose(NULL)
-
- * share/po/fr.po:
- - explain where to put nbsp spaces, explain
- what's nbsp spaces, explain how to compose them
- - add a few missing nbsp spaces
- - translate a few more things
-
-2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * any.pm: fixed English typo
-
-2002/02/26 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
- diskdrake/interactive.pm: propose some mount points for
- removable/nfs/smb
-
- * Xconfigurator.pm: make perl_checker happy
- have "Ok More Show all" instead of "Ok Cancel Show all"
- set the locale properly instead of setting the translated messages in
- the script
-
- * any.pm:
- - zips() now return devices ending with "4", raw_zips() is the old
- zips()
- - rdvd handling
- - add .conf for /etc/devfs/conf.d/ files
- (devfssymlinkf): use /etc/devfs/conf.d/name.conf instead of putting the
- symlink in lib/dev-state
-
- * share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
- when asked for a ISA
- sound card)
- add xine in VIDEO 4
-
- * install_steps.pm:
- - zips() now return devices ending with "4", raw_zips() is the old
- zips()
- - rdvd handling
- - add .conf for /etc/devfs/conf.d/ files
- don't add mem=nopentium anymore. kernel people says it's not needed and
- bad
- for performance. It also means any bug must be addressed to them
- create /dev/dvd for DVDs
-
- * my_gtk.pm (@icon_paths): ease testing
-
- * lang.pm: create bindtextdomain which does only part of the load_mo job
-
- * install_steps_interactive.pm: if no sound card are detected AND the user
- selected things needing a sound card, propose a special case for ISA
- cards
-
- * detect_devices.pm:
- - zips() now return devices ending with "4", raw_zips() is the old
- zips()
- - rdvd handling
- - add .conf for /etc/devfs/conf.d/ files
- cleanup
-
- * fs.pm:
- - zips() now return devices ending with "4", raw_zips() is the old
- zips()
- - rdvd handling
- - add .conf for /etc/devfs/conf.d/ files
-
-2002/02/26 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: Ti Powerbook uses non-std 1152x768, rather than
- 1152x864
-
-2002/02/26 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * standalone/drakxtv: use "xvt -T" rather than "xvt --title": now not only
- we support rxvt
- and xterm but konsole too.
- the only one missing is gnome-terminal which has -t but not -T
- update comments
- - remove useless "no_edit => 1"
- - use interactive_gtk to determine if we're runned under X11 (ie
- authorized acces to X11 server, X11 context, ...)
- - add a note to remember that we should add a method to detect if we
- run under X11 if/when we implement interactive_qt
- - simplify code :
- * remove is_tv and simplify its code to be a one-liner (replace a
- foreach by a scalar context)
- * use format to prevent reverse lookup on scantv run thus
- enabling to reverse the initial hash table
- - all cases (newt, gtk, wt/wo xvt, ...) have been re tested on real
- hw.
-
-2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated po file
-
-2002/02/26 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated po file
-
-2002/02/26 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/25 dam's <damien@mandrakesoft.com>
-
- * any.pm, modparm.pm: corrected modules parameters functions
-
- * standalone/drakfont: debug
-
-2002/02/25 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fixes for cursor or
- nasty pixel displayed using syslinux-1.67-3mdk
-
-2002/02/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: don't put accents for bootloader, we can just use 7bit
- chars
- (titi sucks bigtime)
- add a few nbsp spaces
-
- * rescue/list: add mt-st DAT stuff for joeghi (ghibo)
-
-2002/02/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2002/02/25 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: ignore-table is a global flag, so put it there (when
- needed)
-
- * standalone/drakboot: add --testing
-
- * modules.pm, install_steps.pm, fs.pm, detect_devices.pm: use ide-scsi for
- ide zips
-
- * install_steps_interactive.pm: sort the list of keyboards
-
-2002/02/25 Thierry Vignaud <tvignaud@mandrakesoft.com
-
- * share/po/fr.po: fix a typo (thanks gc)
-
-2002/02/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ru.po, share/po/sp.po, share/po/ca.po, share/po/th.po,
- share/po/uk.po, share/po/es.po, share/po/eo.po, share/po/ro.po,
- share/po/sv.po, share/po/sr.po, share/po/da.po, share/po/el.po,
- share/po/et.po, share/po/cs.po, share/po/tr.po, share/po/az.po,
- share/po/eu.po: updated some po files
-
-2002/02/24 Pixel <pixel@mandrakesoft.com>
-
- * share/keyboards.tar.bz2: fix permission
-
-2002/02/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cy.po, share/po/Makefile: updated Welsh file
-
- * share/po/zh_CN.po, share/po/DrakX.pot, share/po/eu.po, share/po/vi.po,
- share/po/wa.po, share/po/zh_TW.po: udated Vietnamese file
-
- * install_steps_interactive.pm: removed useless _( ) around a string
- displayed in English only
-
- * share/po/be.po, share/po/bg.po, share/po/sk.po, share/po/ar.po,
- share/po/sl.po, share/po/br.po, share/po/bs.po, share/po/sv.po,
- share/po/af.po: updated some po files
-
-2002/02/23 Pixel <pixel@mandrakesoft.com>
-
- * interactive_newt.pm:
- - use simplify_string to ensure multi-line and too long strings are
- not used
- (hacky, but no other solution)
- - set $::setstep like interactive_gtk is doing (??)
-
- * partition_table_empty.pm: handle MBR containing the same character (0 or
- "l")
-
- * diskdrake/interactive.pm: not_edit'able filesystem type (allow esp. a
- nicer newt version)
-
- * devices.pm (devices::make): following a good advice from Andrej
- Borsenkow, return the
- file even if the device file doesn't exist the caller will fail or not.
- The
- advantage is better compatibility than raising an exception
- devices::make doesn't mknod with devfs
-
- * detect_devices.pm: no need to catch the exception from devices::make
- anymore
- devices::make doesn't mknod with devfs
-
- * fs.pm: nicer error message when mount fails
-
- * share/rpmsrate: adding gphoto2
-
- * install_steps_interactive.pm: when passwords do not match, focus on
- first password entry, not the second (thanks to garrick)
-
- * Xconfigurator_consts.pm: remove Option "sw_cursor" for "SiS 6326" since
- it's already handled in Xconfigurator.pm
-
- * my_gtk.pm: fix @icon_paths to include /usr/share/libDrakX/pixmaps
- (thanks to garrick)
-
- * modules.pm: remove "-f" option for insmod
-
-2002/02/23 siegel
-
- * share/po/de.po: fixed silly error
- updates
-
-2002/02/23 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Added automatic configuration of printers
- in Star Office and Open Office.
-
-2002/02/22 dam's <damien@mandrakesoft.com>
-
- * share/advertising/02-internet.pl, share/advertising/07-server.pl,
- share/advertising/11-consul.pl, share/advertising/09-MDKcampus.pl,
- share/advertising/01-gnu.pl, share/advertising/13-Nvert.pl,
- share/advertising/06-user.pl, share/advertising/10-MDKexpert.pl,
- share/advertising/04-develop.pl, share/advertising/05-contcenter.pl,
- share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
- share/advertising/08-games.pl: corrected advertising text
-
- * share/po/fr.po: corrected bad translation
-
- * my_gtk.pm: corrected icon paths
-
-2002/02/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: exit the pur_gtk version after launching the wizard
- version
-
- * any.pm: better rephrasing
- change name and description of security levels
-
- * share/rpmsrate: powermanga: 2 -> 3
-
-2002/02/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po, share/po/DrakX.pot: updated Danish file
-
- * lang.pm: start of support of kde fonts
- fixed some keyboard names
-
- * keyboard.pm: fixed some keyboard names
- added the two ?win_toggle choices
- some info useful for keyboard handling
-
- * share/keyboards.tar.bz2: fixed some keyboard names
-
- * share/po/hu.po: updated hungarian file
-
-2002/02/22 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: even smarted process to kill selection
-
- * lang.pm: fix 2 entries in charset2kde_font
- - remove non needed entries in lang2country
- - fix syntax errors
- - rename kdefont in charset2kde_font
- - much cleanup
- use invalid instead of unknown for errors when checking
- put back the less deep langs
- have the tree less deep (esp. nicer when not displaying UTF-8 entries)
- not translating in console installs (esp. newt) when the font is missing
- restrict the langs displayed to non utf8 during install
- fix warning message
- disable perl warnings when checking
- make perl_checker happy
-
- * devices.pm: add atibm (thanks to Robin Pollard)
-
- * bootloader.pm: put ignore-table to disable lilo's partition table
- checking
- (esp. the checking of the CHS geometry vs linear geometry)
-
- * Xconfigurator_consts.pm: fix syntax typo
-
- * Makefile:
- - exclude urpm from perl_checker
- - add checking keyboard.pm
-
- * install_steps_interactive.pm, install2.pm, install_steps.pm: not
- translating in console installs (esp. newt) when the font is missing
-
- * keyboard.pm: use invalid instead of unknown for errors when checking
- change the message
- disable perl warnings when checking
- - add checks for the various data structures
- - fix another typo for usb2drakxkbd
- fix typo
-
- * share/rpmsrate: add procmail in SYSTEM 4
- add samba-doc samba-winbind samba-swat
-
- * Xconfigurator.pm: workaround set_active failing
-
- * any.pm: use the setupBootloader help instead of setupBootloaderGeneral
- restrict the langs displayed to non utf8 during install
-
-2002/02/22 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * standalone/drakxtv: update TODO list;
- explain what is HRC
-
- * share/po/fr.po: further translations
- update french translation
-
-2002/02/21 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: corrected icon list
-
-2002/02/21 fabman
-
- * share/po/es.po: updated spanish po file
-
-2002/02/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: spacecup no more exists
- armagetron is nice, no use to install gltron as well
- autoconf2.5 and automake1.5
-
- * interactive.pm: when not in X and needs su, use consolehelper now
- use consolehelper when no "kdeinit: kwin" process
- is running
-
-2002/02/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21 Pixel <pixel@mandrakesoft.com>
-
- * lvm.pm, install_any.pm: ensure lvm tools don't need to be all installed
- at the same time
-
- * lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
- getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
- * share/rpmsrate: add kinput2-wnn4
-
-2002/02/21 siegel
-
- * share/po/de.po: update
-
-2002/02/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Removed "Manual configuration" button when "Local
- Printer" dialog is started from the queue modification menu (Recommended
- mode).
- Improved matching of printer names resulting from auto-detection with
- names in the database.
-
-2002/02/21 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: final batch of typos fixes (next time, please run a
- check speller)
- fix more typos
- update french translation;
- fix typos
-
- * diskdrake/interactive.pm: shorter displayed message
-
-2002/02/21 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: changed button label
-
- * standalone/icons/gmon.png, standalone/icons/categ.png,
- standalone/icons/verti.png, standalone/icons/drakbackup.540x57.png,
- standalone/icons/net_c.png, standalone/icons/ic82-system-40.png,
- standalone/icons/wiz_drakgw.png, standalone/icons/ic-drakfont-48.png,
- standalone/icons/ic82-back-up-16.png,
- standalone/icons/wiz_scannerdrake.png,
- standalone/icons/ic82-discdurwhat-40.png,
- standalone/icons/ic82-tape-40.png, standalone/icons/ic82-network-40.png,
- standalone/icons/smbnfs_default.png, standalone/icons/smbnfs_server.png,
- standalone/icons/hori.png, standalone/icons/wiz_draknet.png,
- standalone/icons/smbnfs_mounted.png, standalone/icons/wiz_firewall.png,
- standalone/icons/wiz_default_up.png,
- standalone/icons/ic82-back-up-32.png, standalone/icons/ic82-CD-40.png,
- standalone/icons/ic82-systemeplus-40.png,
- standalone/icons/ic82-back-up-48.png,
- standalone/icons/ic82-dossier-32.png, standalone/icons/net_d.png,
- standalone/icons/ic82-moreoption-40.png,
- standalone/icons/smbnfs_has_mntpoint.png, standalone/icons/tradi.png,
- standalone/icons/wiz_printerdrake.png,
- standalone/icons/wiz_default_left.png,
- standalone/icons/eth_card_mini2.png, standalone/icons/net_u.png,
- standalone/icons/ic82-users-40.png, standalone/icons/mdk_logo.png,
- standalone/icons/ic82-others-40.png, standalone/icons/ic82-when-40.png,
- standalone/icons/draknet_step.png, standalone/icons/drakfont.620x57.png,
- standalone/icons/ic82-where-40.png: added new gfx only standalone
-
- * pixmaps/categ.png, pixmaps/verti.png, pixmaps/ic82-moreoption-40.png,
- pixmaps/ic82-system-40.png, pixmaps/net_c.png,
- pixmaps/ic-drakfont-48.png, pixmaps/ic82-CD-40.png,
- pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
- pixmaps/draknet_step.png, pixmaps/ic82-dossier-32.png,
- pixmaps/ic82-back-up-48.png, pixmaps/smbnfs_server.png,
- pixmaps/ic82-discdurwhat-40.png, pixmaps/smbnfs_default.png,
- pixmaps/gmon.png, pixmaps/drakbackup.540x57.png,
- pixmaps/smbnfs_mounted.png, pixmaps/wiz_printerdrake.png,
- pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
- pixmaps/drakfont.620x57.png, pixmaps/ic82-tape-40.png,
- pixmaps/wiz_draknet.png, pixmaps/net_d.png,
- pixmaps/ic82-systemeplus-40.png, pixmaps/wiz_drakgw.png,
- pixmaps/mdk_logo.png, pixmaps/ic82-users-40.png,
- pixmaps/ic82-back-up-16.png, pixmaps/hori.png, pixmaps/tradi.png,
- pixmaps/smbnfs_has_mntpoint.png, pixmaps/eth_card_mini2.png,
- pixmaps/wiz_firewall.png, pixmaps/net_u.png, pixmaps/ic82-where-40.png,
- pixmaps/ic82-others-40.png, pixmaps/ic82-network-40.png,
- pixmaps/wiz_scannerdrake.png: removed gfx not used during install
-
-2002/02/21 François Pons <fpons@mandrakesoft.com>
-
- * crypto.pm: fixed another not seen 8.1 reference in label.
- fixed 8.1 release hard coded.
-
-2002/02/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fi.po: updated pot file
- updated Finnish file
-
- * help.pm: updated help file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21 Pixel <pixel@mandrakesoft.com>
-
- * share/themes/blueHeart-button4.png, share/themes-DarkMarble.rc,
- install_gtk.pm, share/themes/DarkMarble-button3_out.png,
- share/themes.rc, share/themes/blueHeart-brown_bg1.png,
- share/themes/DarkMarble-button3_in.png, share/themes-blueHeart.rc,
- share/themes/DarkMarble-check_on.png,
- share/themes/blueHeart-button1.png,
- share/themes/DarkMarble-check_off.png,
- share/themes/blueHeart-button2.png, share/themes/DarkMarble-gloom2.png,
- share/themes/DarkMarble-button3_in_prelight.png,
- share/themes/DarkMarble-button3_out_prelight.png: remove DarkMarble and
- blueHeart themes
-
- * bootloader.pm: have devfs=nomount for failsafe
-
- * Makefile.config, share/po/Makefile: make a difference between PMS and
- ALLPMS. For install, only use PMS
-
- * lvm.pm: ensure lvm tools don't need to be all installed at the same time
-
- * Makefile: template.in stuff removed
- make a difference between PMS and ALLPMS. For install, only use PMS
-
- * pkgs.pm: smarter choosing of processes to kill
-
- * tools/i386/netboot/make_boot_network: cleanup
-
- * modules.pm: add aic7xxx_old
-
- * install_any.pm: ensure lvm tools don't need to be all installed at the
- same time
- (remove_bigseldom_used): remove xf86Wacom.so & mkfs.xfs
- DarkMarble theme is removed
- (kdeicons_postinstall): remove this obsolete code
- no special case for installing imwheel
-
- * lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
- getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
- * network/smbnfs.pm, network/nfs.pm: nicer conditional displaying of nfs
- comment
-
-2002/02/21 siegel
-
- * share/po/de.po: update
- snapshot
-
-2002/02/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added "type => 'list'" to the printer modification
- menu, it appeared as a drop-down list during the installation.
-
-2002/02/21 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * standalone/drakxtv: more translatable strings;
- hide scantv output on console;
- check that we're under X11 before running scantv in an xterm
-
-2002/02/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/doc/UPDATEMODULES: add an example on modules with options
- first line comment no more necessary
- s/row/column/, silly me
-
- * standalone.pm: explanations stuff: no reason to use "updated" at a place
- when we
- use "modified" at the rest of the locations..
-
-2002/02/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/es.po: updated Spanish file
- updated Spanish file
-
-2002/02/20 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (ejectCdrom): display "files still open:" for all
- processes when umounting fail
-
- * pkgs.pm: much simpler & stronger killing of still running processes
-
- * mouse.pm: USB|Generic is 3 button mice, add a USB 2 Button entry
-
-2002/02/20 dam's <damien@mandrakesoft.com>
-
- * share/themes-marble3d.rc: updated theme
-
- * network/adsl.pm: mgmt install corrected
-
-2002/02/20 daouda
-
- * share/rpmsrate:
- - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
- NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20 fcrozat
-
- * share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem, tools/oem-prepare: synced with newer rpmsrate of
- DrakX and newer method to select INSTALL packages.
-
- * standalone/XFdrake: fixed NVIDIA package in urpmi db by directly using
- urpm library instead of
- parsing (now removed) depslist.ordered file.
-
- * Xconfigurator.pm: fixed default value if selecting a card (use previous
- one or existing one).
- added XFree 4 driver choice if Other|Unlisted is chosen.
- fixed cancel on card selection so that previous choice is not lost.
-
- * Xconfigurator_consts.pm: added @allbutfbdrivers and @alldrivers for
- listing XFree 4 drivers.
-
-2002/02/20 gbeauchesne
-
- * share/rpmsrate:
- - Add gcc3.0-c++ and libstdc++3.0-devel
- - Prefer gcc3.0-java over gcc-java
- - Remove BasiliskII-sheepnet since it does no longer exist
- - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po: updated FRench file
-
- * share/po/es.po: updated Spanish file
- updated Spanish file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/20 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: fix s/SILO/LILO/
-
- * fsedit.pm: have "with /usr" translated
-
- * install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
- button
-
- * steps.pm: move installUpdates after configureX (workaround for bad
- timeouts during installing updates)
-
- * install_steps.pm, any.pm, standalone/draksec: factorize and update the
- reading of previous security level
-
-2002/02/20 siegel
-
- * share/po/de.po: update
-
-2002/02/20 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: update french translations
-
-2002/02/20 dam's <damien@mandrakesoft.com>
-
- * share/advertising/13-Nvert.pl: changed toll free
-
- * my_gtk.pm: added mcc kill if wait message
-
- * standalone/logdrake: cosmetic change, mcc compliance
-
-2002/02/20 daouda
-
- * share/rpmsrate:
- - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
- NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20 fcrozat
-
- * share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm, install_any.pm: fixed INSTALL category in rpmsrate for copying
- file when changing cd (was an
- limitation in read_rpmsrate when a package having a category and INSTALL
- caused
- INSTALL to be dropped).
-
-2002/02/20 gbeauchesne
-
- * share/rpmsrate:
- - Add gcc3.0-c++ and libstdc++3.0-devel
- - Prefer gcc3.0-java over gcc-java
- - Remove BasiliskII-sheepnet since it does no longer exist
- - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/advertising/07-server.pl, share/advertising/01-gnu.pl: Improved
- English strings
-
- * share/po/hu.po, share/po/es.po, share/po/ar.po: updated Hungarian and
- Spanish files
-
-2002/02/20 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove fsck_option (obsolete)
-
- * share/po/fr.po: fix s/SILO/LILO/
-
- * fsedit.pm: have "with /usr" translated
-
- * install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
- button
-
- * steps.pm: move installUpdates after configureX (workaround for bad
- timeouts during installing updates)
-
- * install_steps.pm, any.pm, standalone/draksec: factorize and update the
- reading of previous security level
-
-2002/02/20 siegel
-
- * share/po/de.po: snapshot
-
-2002/02/19 dam's <damien@mandrakesoft.com>
-
- * share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19 fcrozat
-
- * share/rpmsrate:
- -Install gnome-vfs-extras when installing nautilus (to get samba
- browsing)
- -don't install nautilus-mozilla, it is pulled by nautilus
-
-2002/02/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * any.pm: english fix
-
-2002/02/19 Pixel <pixel@mandrakesoft.com>
-
- * share/advertising/Makefile: advertising installation cleanup
-
- * diskdrake/smbnfs_gtk.pm: ugly hack to fix die
-
-2002/02/19 siegel
-
- * share/po/de.po: updates for beta 3
-
-2002/02/19 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
- dialog.
-
-2002/02/19 dam's <damien@mandrakesoft.com>
-
- * share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
- $prefix in front of /var/* when missing
- since we give "lilo.conf" in drakbug_report, let's also
- give "menu.lst"
-
-2002/02/19 Pixel <pixel@mandrakesoft.com>
-
- * share/advertising/Makefile: advertising installation cleanup
-
-2002/02/19 siegel
-
- * share/po/de.po: updates for beta 3
-
-2002/02/19 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
- dialog.
-
-2002/02/19 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: setting help
-
- * share/advertising/10-MDKexpert.png, share/advertising/07-server.png,
- share/advertising/05-contcenter.png, share/advertising/03-graphic.png,
- share/advertising/12-MDKstore_icon.png,
- share/advertising/06-user_icon.png,
- share/advertising/04-develop_icon.png,
- share/advertising/12-MDKstore.png, share/advertising/00-thanks.png,
- share/advertising/06-user.png, share/advertising/02-internet_icon.png,
- share/advertising/04-develop.png,
- share/advertising/05-contcenter_icon.png,
- share/advertising/10-MDKexpert_icon.png, share/advertising/13-Nvert.png,
- share/advertising/11-consul.png, share/advertising/03-graphic_icon.png,
- share/advertising/02-internet.png, share/advertising/07-server_icon.png,
- share/advertising/01-gnu.png, share/advertising/08-games.png,
- share/advertising/09-MDKcampus.png,
- share/advertising/09-MDKcampus_icon.png,
- share/advertising/08-games_icon.png: re-adding with -kb
- removing for re-adding with -kb
- added advertising for translation
-
- * share/advertising/essi.p: blah
- added advertising for translation
-
- * my_gtk.pm: new icon handler
-
- * Makefile.config: addde share/advertising/*.pl for translation
-
- * share/advertising/Makefile: new Makefile to install ads
-
- * share/advertising/00-thanks.pl, share/advertising/06-user.pl,
- share/advertising/08-games.pl, share/advertising/list,
- share/advertising/09-MDKcampus.pl, share/advertising/01-gnu.pl,
- share/advertising/11-consul.pl, share/advertising/13-Nvert.pl,
- share/advertising/02-internet.pl, share/advertising/07-server.pl,
- share/advertising/10-MDKexpert.pl, share/advertising/04-develop.pl,
- share/advertising/05-contcenter.pl, share/advertising/12-MDKstore.pl,
- share/advertising/03-graphic.pl: added advertising for translation
-
-2002/02/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
- $prefix in front of /var/* when missing
- since we give "lilo.conf" in drakbug_report, let's also
- give "menu.lst"
-
-2002/02/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/vi.po, share/po/hu.po: updated Vietnamese and Hungarian files
-
-2002/02/19 Pixel <pixel@mandrakesoft.com>
-
- * share/advertising/Makefile: advertising installation cleanup
-
- * install2.pm: anchor the -IP match at the end of the string
- move loading /tmp/network from stage1 before doing the auto_install
- stuff to
- allow the -IP feature on auto_install file name
-
- * share/rpmsrate: add grub in 4 SYSTEM
-
-2002/02/19 Till Kamppeter <till@mandrakesoft.com>
-
- * standalone/printerdrake, printer.pm: Assured that the default page size
- is "Letter" for US/Canada and "A4" for the rest of the world.
- The "Description" field of a printer queue is filled in with printer
- manufacturer and model by default.
- Removed unused varaiables in /usr/sbin/printerdrake.
-
- * printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
- dialog.
- Assured that the default page size is "Letter" for US/Canada and "A4"
- for the rest of the world.
- The "Description" field of a printer queue is filled in with printer
- manufacturer and model by default.
- Removed unused varaiables in /usr/sbin/printerdrake.
-
- * install_steps_interactive.pm: Replaced "a4" and "letter" by "A4" and
- "Letter" so that Foomatic recognizes
- the paper sizes.
- Also use "Letter" paper for "en_CA" and "fr_CA" locales.
-
-2002/02/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: when no net device found, print a msg to tell
- that now most pcmcia network adapters are supported
- with network.img
-
-2002/02/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help file
-
- * share/po/sp.po, share/po/zh_CN.po, share/po/DrakX.pot, share/po/th.po,
- share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po,
- share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/sl.po,
- share/po/vi.po, share/po/uk.po, share/po/wa.po, share/po/sv.po,
- share/po/zh_TW.po, share/po/it.po: updated pot file
-
-2002/02/18 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm, standalone/localedrake:
- - handle --kde_lang with optionally --kde_country
- - handle --apply
-
- * install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
-2002/02/18 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: new gfx
-
-2002/02/18 fcrozat
-
- * share/rpmsrate: Install Guppi when installing gnumeric
-
-2002/02/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: titi sucks again
-
-2002/02/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sk.po: updated Slovak ile
- updated pot file
-
- * help.pm: updated help file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
- updated pot file
-
-2002/02/18 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm:
- - remove media_type cdrom-burner, use {capacity} instead
- - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
- * diskdrake/smbnfs_gtk.pm:
- - add Cancel
- - move "click here" in "Search servers" on the right side
- - remove Export
- - fix bug
-
- * share/rpmsrate: raise xsane in SCANNER (Yves Duret)
- raise mkisofs & cdrecord in BURNER
-
- * Xconfigurator.pm: workaround not having the right to connect to our new
- created test server.
- info about the pb (sorry for the french):
- quand on lance le serveur
- - via xdm/kdm/startx, ca utilise xauth, xhost est fermé
- - via X/xinit, xhost est ouvert sur localhost, xauth n'est pas utilisé
- *sauf* si X/xinit est lancé ŕ partir d'un X *et* .Xauthority est non
- vide.
- dans ce cas, xhost est fermé, et aucun xauth n'est ajouté
- une conséquence, c'est que XFdrake ne peut pas accéder au X de
- test si XFdrake est lancé sous X ou "xauth list" est non vide
- exception: quand on lance le xdm/kdm en root, xhost n'est pas
- fermé,
- pas contre il est fermé en root & startx.
-
- * any.pm (fileshare_config): rework the custom message and launch
- userdrake
- (report_bug): add lilo.conf
-
- * standalone/localedrake:
- - handle --kde_lang with optionally --kde_country
- - handle --apply
- change the message & ask wether to logout or not
-
- * lang.pm:
- - handle --kde_lang with optionally --kde_country
- - handle --apply
- (lang2kde_lang): add missing valid_kde_langs
- fuzzy language finding between available langs when it doesn't match
- (useful for upgrades where fr_FR was fr_FR@euro)
-
- * diskdrake/interactive.pm: remove cdrom-burner from media_type set
-
- * install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
- * fs.pm (mount_options_unpack): add usrquota and grpquota for
- ext2/ext3/reiserfs/xfs
- - remove media_type cdrom-burner, use {capacity} instead
- - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
- * share/compssUsers: add EDITORS in Development/Development
- add EDITORS in Development/Development
-
-2002/02/18 yduret
-
- * bootlook.pm: remove aurora part (commented for the moment)
-
- * standalone/scannerdrake: HP OfficeJet support
- scsi/parport preliminary support
-
- * scanner.pm: update
- scsi parport preliminary support
- no more show unsupported scanner
- common output for ScannerDB update from sane *.desc files and from
- usbtable
-
-2002/02/17 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/interactive.pm: warn_if_renumbered now also done at install
-
-2002/02/17 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: have icewm-light in any case (to be used as a failsafe
- window manager)
- add hotplug, usbutils and usbview with the new flag USB
-
- * install_any.pm: hotplug now handled via rpmsrate and the USB flag
- add some log to know why umounting /tmp/image fail
-
- * diskdrake/interactive.pm: warn_if_renumbered now also done at install
- force scalar context for warp_text
-
- * share/po/id.xsl, share/po/help_xml2pm.pl: use xsltproc as a filter to
- remove entities
-
- * share/po/Makefile (clean): remove .memdump
-
- * any.pm (autologin): do not allow empty user name since no autologin can
- already be achieved by choosing "No"
-
- * install2.pm: do not use run_program::xxx, use directly "system" so that
- stdout is kept unchanged during "postInstall" execution
-
- * network/smb.pm: fix typo (s/nfs/smbfs/)
-
-2002/02/17 siegel
-
- * help.pm: new version for 8.2
-
- * share/po/de.po: new german version
-
- * share/po/help_xml2pm.pl: added check for missing xsltproc
- fix perl warnings after adding -w
-
- * share/po/.cvsignore: added .memdump
-
- * share/po/Makefile: allow me to work with a symlink to doc in this
- directory
-
-2002/02/16 Pixel <pixel@mandrakesoft.com>
-
- * lvm.pm:
- - LVs "device" field were containing "/dev/vg/number" whereas it must
- be "vg/name"
- - added lv_resize
-
- * diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
- * crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
-2002/02/16 Pixel <pixel@mandrakesoft.com>
-
- * Xconfig.pm:
- - prefer XKB available from existing XF86Config over
- /etc/sysconfig/keyboard KEYTABLE
- - fix translating from /etc/sysconfig/keyboard KEYTABLE to XKB
-
- * diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
- * interactive_newt.pm: do not trash error messages if testing
-
- * lang.pm (country2lang): created
- (write): ensure it doesn't fail when kdeglobals is not writable (eg: the
- directory doesn't exist)
- (list): return the languages in a "specific" order (favours non utf8
- over utf8)
-
- * crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
- * install_steps_interactive.pm (setupSCSI): when "clicked", ask "Do you
- have any SCSI interfaces" instead
- of assuming there is a SCSI interface and asking the driver name
-
- * lvm.pm:
- - LVs "device" field were containing "/dev/vg/number" whereas it must
- be "vg/name"
- - added lv_resize
- - call pvcreate with "-y -ff"
- - created LVs are notFormatted
-
- * interactive.pm:
- - fix non X + testing + su
- - since "interactive" takes care of "format" for type "combo", remove
- "format" (so that interactive_newt which switch to type "list" don't
- apply
- "format" once again)
-
- * standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (country2lang): created
- (write): ensure it doesn't fail when kdeglobals is not writable (eg: the
- directory doesn't exist)
- (list): return the languages in a "specific" order (favours non utf8
- over utf8)
- fix call to update_gnomekderc
-
- * standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
- * share/po/sk.po, share/po/cs.po, share/po/es.po: updated Czech, Spanish
- and Slovak files
-
-2002/02/16 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm: fix call to update_gnomekderc
- remove unused & unneeded special %lang2kde_lang
- - add lang::check
- - fix utf-ko -> utf_ko
- - fix utf-14 -> utf_14
- - modify share/config/kdeglobals
- - add charset2kde_charset, lang2country, lang2kde_lang
-
-2002/02/15 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: embedded mode correction
-
- * my_gtk.pm: highlight in gtk icon widget
-
- * share/themes/mdk-check_on.png, share/themes/mdk-toggle_off.png,
- share/themes/mdk-toggle_on.png, share/themes/mdk-check_off.png: new gfx
-
- * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
- share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
- share/step-orange-on.xpm, share/step-green-on.xpm,
- share/step-red-click.xpm: new gfx
- new gfx
-
-2002/02/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/vi.po, share/po/fi.po, share/po/DrakX.pot, share/po/fr.po,
- share/po/wa.po, share/po/da.po, share/po/cs.po, share/po/hu.po,
- share/po/eu.po: updated Basque file; fixed a msgid change
-
- * share/po/sv.po: updated Swedish file
- updated Basque file; fixed a msgid change
-
-2002/02/15 Pixel <pixel@mandrakesoft.com>
-
- * run_program.pm: remove assigning STDIN to /dev/null since:
- - programs should not use STDIN
- - the "postInstall" script for auto_install's is more happy still
- having the STDIN.
-
- * diskdrake/smbnfs_gtk.pm, pixmaps/smbnfs_has_mntpoint.png,
- pixmaps/smbnfs_default.png, pixmaps/smbnfs_mounted.png,
- pixmaps/smbnfs_server.png: add icons showing if a mount-point is
- associated or if the share is mounted
-
- * pkgs.pm: fix typo
-
- * diskdrake/interactive.pm: use the new warp_text
-
- * install_steps.pm: use lang::charset2kde_charset
-
- * standalone/localedrake: lang::write doesn't need the filename anymore
-
- * any.pm: use 'combo' instead of 'type' for bootloader choice and security
- choice
- (requested by fredb&dadou)
-
- * interactive_gtk.pm: force scalar for Gtk::Label->new with warp_text
-
- * interactive.pm: favour "combo" over "list" in any case
-
- * Makefile (check): add lang::check checking
-
-2002/02/15 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: update translation
-
-2002/02/14 Pixel <pixel@mandrakesoft.com>
-
- * standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
- * network/smb.pm, network/smbnfs.pm, network/nfs.pm: cleaner & OOed code,
- with more code sharing
-
- * interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
- feature
-
- * my_gtk.pm (ctree_set_icon): new function
-
- * diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
- mount-point is associated are coming
-
- * standalone/diskdrake: fix expert and testing options handling
-
-2002/02/14 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: embedded mode
- drakfont embedde mode
-
- * share/step-red-on.xpm, share/step-red.xpm, share/step-orange.xpm,
- share/step-orange-on.xpm, share/step-orange-click.xpm,
- share/step-green-click.xpm, share/step-red-click.xpm,
- share/step-green-on.xpm: new gfx
-
-2002/02/14 erwan
-
- * tools/i386/netboot/ni5010/pxegrub, tools/i386/netboot/epic100/stage1,
- tools/i386/netboot/epic100/stage2, tools/i386/netboot/3c90x/pxegrub,
- tools/i386/netboot/rtl8139/pxegrub, tools/i386/netboot/ni5210/nbgrub,
- tools/i386/netboot/otulip/stage1, tools/i386/netboot/otulip/stage2,
- tools/i386/netboot/exos205/nbgrub, tools/i386/netboot/eepro/stage1,
- tools/i386/netboot/eepro/stage2, tools/i386/netboot/3c529/nbgrub,
- tools/i386/netboot/smc9000/pxegrub, tools/i386/netboot/ne2100/stage1,
- tools/i386/netboot/ne2100/stage2, tools/i386/netboot/exos205/pxegrub,
- tools/i386/netboot/sis900/nbgrub, tools/i386/netboot/ne/stage1,
- tools/i386/netboot/ne/stage2, tools/i386/netboot/tulip/nbgrub,
- tools/i386/netboot/sk_g16/nbgrub, tools/i386/netboot/eepro100/pxegrub,
- tools/i386/netboot/tiara/nbgrub, tools/i386/netboot/rtl8139/stage1,
- tools/i386/netboot/rtl8139/stage2, tools/i386/netboot/tiara/pxegrub,
- tools/i386/netboot/lance/nbgrub, tools/i386/netboot/depca/nbgrub,
- tools/i386/netboot/ni6510/stage1, tools/i386/netboot/3c90x/nbgrub,
- tools/i386/netboot/ni6510/stage2, tools/i386/netboot/smc9000/stage1,
- tools/i386/netboot/smc9000/stage2, tools/i386/netboot/3c509/pxegrub,
- tools/i386/netboot/3c509/stage1, tools/i386/netboot/3c509/stage2,
- tools/i386/netboot/sis900/pxegrub, tools/i386/netboot/ne2100/pxegrub,
- tools/i386/netboot/3c595/nbgrub, tools/i386/netboot/eepro/pxegrub,
- tools/i386/netboot/wd/nbgrub, tools/i386/netboot/ns8390/nbgrub,
- tools/i386/netboot/ni5210/stage1, tools/i386/netboot/ni5010/nbgrub,
- tools/i386/netboot/ni5210/stage2, tools/i386/netboot/exos205/stage1,
- tools/i386/netboot/exos205/stage2, tools/i386/netboot/eepro100/nbgrub,
- tools/i386/netboot/3c529/stage1, tools/i386/netboot/3c529/stage2,
- tools/i386/netboot/sis900/stage1, tools/i386/netboot/tulip/stage1,
- tools/i386/netboot/sis900/stage2, tools/i386/netboot/tulip/stage2,
- tools/i386/netboot/sk_g16/stage1, tools/i386/netboot/w89c840/nbgrub,
- tools/i386/netboot/sk_g16/stage2, tools/i386/netboot/tiara/stage1,
- tools/i386/netboot/tiara/stage2, tools/i386/netboot/depca/stage1,
- tools/i386/netboot/lance/stage1, tools/i386/netboot/3c90x/stage1,
- tools/i386/netboot/depca/stage2, tools/i386/netboot/lance/stage2,
- tools/i386/netboot/3c90x/stage2, tools/i386/netboot/otulip/pxegrub,
- tools/i386/netboot/tulip/pxegrub, tools/i386/netboot/epic100/nbgrub,
- tools/i386/netboot/3c595/stage1, tools/i386/netboot/ni5210/pxegrub,
- tools/i386/netboot/3c595/stage2, tools/i386/netboot/w89c840/pxegrub,
- tools/i386/netboot/wd/stage1, tools/i386/netboot/wd/pxegrub,
- tools/i386/netboot/wd/stage2, tools/i386/netboot/otulip/nbgrub,
- tools/i386/netboot/ns8390/stage1, tools/i386/netboot/eepro/nbgrub,
- tools/i386/netboot/ni5010/stage1, tools/i386/netboot/ns8390/stage2,
- tools/i386/netboot/ni5010/stage2, tools/i386/netboot/ne2100/nbgrub,
- tools/i386/netboot/ni6510/pxegrub, tools/i386/netboot/eepro100/stage1,
- tools/i386/netboot/eepro100/stage2, tools/i386/netboot/ne/nbgrub,
- tools/i386/netboot/depca/pxegrub, tools/i386/netboot/ne/pxegrub,
- tools/i386/netboot/w89c840/stage1, tools/i386/netboot/rtl8139/nbgrub,
- tools/i386/netboot/w89c840/stage2, tools/i386/netboot/sk_g16/pxegrub,
- tools/i386/netboot/lance/pxegrub, tools/i386/netboot/ni6510/nbgrub,
- tools/i386/netboot/smc9000/nbgrub, tools/i386/netboot/3c529/pxegrub,
- tools/i386/netboot/3c595/pxegrub, tools/i386/netboot/ns8390/pxegrub,
- tools/i386/netboot/epic100/pxegrub, tools/i386/netboot/3c509/nbgrub: New
- version of grub (0.91) with allstage and pxegrub
-
- * tools/i386/netboot/3c507/pxegrub, tools/i386/netboot/3c507/stage1,
- tools/i386/netboot/3c507/stage2, tools/i386/netboot/3c503/nbgrub,
- tools/i386/netboot/3c503/pxegrub, tools/i386/netboot/3c507/nbgrub,
- tools/i386/netboot/3c503/stage1, tools/i386/netboot/3c503/stage2:
- Fixning some file missing in netboot
-
-2002/02/14 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed obsoletes management according to urpmi code.
-
-2002/02/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ga.po, share/po/cy.po, share/po/is.po, share/po/ar.po,
- share/po/sl.po, share/po/ro.po: Instead of temporary removingfiles from
- CVS put a rule in Makefile to
- don't use them (thanks Thierry)
- updated some po files; removed the ones too lowly translated for the 8.2
-
- * share/po/pt_BR.po: updted Brazilian file
- updated some po files; removed the ones too lowly translated for the 8.2
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po,
- share/po/ru.po, share/po/hr.po, share/po/ko.po, share/po/nl.po,
- share/po/ja.po, share/po/sv.po, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated some po files; removed the ones
- too lowly translated for the 8.2
-
- * share/po/vi.po: updated Vietnamese file
- updated some po files; removed the ones too lowly translated for the 8.2
-
- * share/po/Makefile: Instead of temporary removingfiles from CVS put a
- rule in Makefile to
- don't use them (thanks Thierry)
-
-2002/02/14 Pixel <pixel@mandrakesoft.com>
-
- * standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
- * network/smbnfs.pm, network/smb.pm, network/nfs.pm: cleaner & OOed code,
- with more code sharing
-
- * interactive.pm: if testing, don't use kdesu
-
- * install_steps.pm: gzip report.bug
-
- * interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
- feature
-
- * standalone/diskdrake: fix expert and testing options handling
-
- * my_gtk.pm (ctree_set_icon): new function
-
- * c/stuff.xs.pm: undef'ing some macros used by 2 independent sources et
- still needed :-(
- #include iconv.h is needed even when C_RPM is undefined
-
- * diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
- mount-point is associated are coming
-
-2002/02/14 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/br.po: update
- convert to utf-8
-
- * standalone/drakxtv: uses xawtv internal strings instead of frequencies
- tables ids as values
- in %freqtables in order to enhance drakxtv robustness when
- translators'll
- arrive. thus we'll pass right strings to scantv instead of translated
- ones
- explain how we manage the "all frequencies" case
- display sorted tv norms
-
-2002/02/13 erwan
-
- * tools/i386/netboot/device.map, tools/i386/netboot/makeImages: Adding
- missing file on netboot
-
- * tools/i386/netboot/make_boot_network, tools/i386/netboot/grub: updating
- grub in netboot
-
-2002/02/13 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: avoid generating headers for copying file in
- postinstall-rpm directory.
- make sure not to crash if a package that should have been in CD1 is
- somewhere
- else.
- fixed stupid typo.
- removed all @needToCopy... variables and now use INSTALL category in
- rpmsrate.
-
- * share/rpmsrate: updated INSTALL category with the merge of DrakX
- obsoleted list (it will use
- INSTALL now :-)
-
- * pkgs.pm: added extension to setSelectedFromCompssList.
-
- * share/rpmsrate.server: synced INSTALL category with standard rpmsrate.
-
-2002/02/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Danish and Hungarian files
-
- * share/po/da.po: updated Danish file
- updated Danish and Hungarian files
-
-2002/02/13 Pixel <pixel@mandrakesoft.com>
-
- * network/nfs.pm: $server->{ip} is no more mandatory
-
- * network/smb.pm: don't show shares ending with "$"
- $server->{ip} is no more mandatory
-
- * any.pm (setupBootloader): switch from "list" to "combo"
-
- * fs.pm (fstab_to_string): unsetting mount points in standalone will now
- work
- - handle WORM type in /proc/scsi/scsi
- - added media_type cdrom-burner
- - adapting to new media_type
- - nicer fd&hd testing
-
- * diskdrake/smbnfs_gtk.pm: have the fstab entries shown by default
-
- * detect_devices.pm, diskdrake/interactive.pm:
- - handle WORM type in /proc/scsi/scsi
- - added media_type cdrom-burner
- - adapting to new media_type
- - nicer fd&hd testing
-
-2002/02/13 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: When one visited the help page of a remote CUPS printer
- afterwards the full
- printer modification menu was shown, not only the one for remote CUPS
- printers. This is fixed now.
-
-2002/02/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po, share/po/DrakX.pot: updated Czech and Walloon files
-
- * share/po/cs.po: updated Czech file
- updated Czech and Walloon files
-
-2002/02/12 Pixel <pixel@mandrakesoft.com>
-
- * devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
-2002/02/12 Till Kamppeter <till@mandrakesoft.com>
-
- * detect_devices.pm: In the USB auto-detection checked whether and where
- the device node was
- created.
-
-2002/02/12 dam's <damien@mandrakesoft.com>
-
- * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
- share/themes/mdk-check_on.png, share/step-green-click.xpm,
- share/step-green.xpm, share/step-red-click.xpm,
- share/themes/mdk-check_off.png: new gfx
-
- * standalone/drakbackup, network/network.pm: bug correction
-
-2002/02/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Hungarian file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/12 Pixel <pixel@mandrakesoft.com>
-
- * devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
- * docs/README.pxe: cleanup the .cfg
-
- * share/rpmsrate:
- - move bootsplash from SYSTEM to X
- - lower Aurora
-
-2002/02/12 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed:
- - Endless loop when entering printerdrake during installation in
- recommended
- mode without local printer
- - Printerdrake was not closed when one was in the "Add Printer"
- sequence
- during installation and one clicked another installation item (entries
- on left hand side)
- - When configuring printing only after installation Printerdrake tried
- to
- check the installed queues without Foomatic being installed (bug was
- already in 8.1, but noone discovered it).
- - CUPS died when one tried to add a (local) printer in recommended
- mode
- after installation.
- - Improved text for the dialog telling that no local printer was
- detected.
- - The list of auto-detected printers appeared as drop-down menu and
- not as
- a list.
-
- * detect_devices.pm: In the USB auto-detection checked whether and where
- the device node was
- created.
- Fixes on device auto-detection:
- - Made USB printer auto-detection routine in "detect_devices.pm"
- creating
- the appropriate device nodes (needed for USB printers being recognized
- during installation).
- - Fixed "devices.pm" to be able to handle device files with numbers
- geater
- than 9 (ex: /dev/usb/lp10).
-
- * standalone/printerdrake:
- - Assure that Foomatic is installed before checking existing printer
- queues.
-
- * devices.pm: Fixes on device auto-detection:
- - Made USB printer auto-detection routine in "detect_devices.pm"
- creating
- the appropriate device nodes (needed for USB printers being recognized
- during installation).
- - Fixed "devices.pm" to be able to handle device files with numbers
- geater
- than 9 (ex: /dev/usb/lp10).
-
- * printer.pm: Added forgotten '$prefix'es.
- Fixed:
- - Endless loop when entering printerdrake during installation in
- recommended
- mode without local printer
- - Printerdrake was not closed when one was in the "Add Printer"
- sequence
- during installation and one clicked another installation item (entries
- on left hand side)
- - When configuring printing only after installation Printerdrake tried
- to
- check the installed queues without Foomatic being installed (bug was
- already in 8.1, but noone discovered it).
- - CUPS died when one tried to add a (local) printer in recommended
- mode
- after installation.
- - Improved text for the dialog telling that no local printer was
- detected.
- - The list of auto-detected printers appeared as drop-down menu and
- not as
- a list.
-
-2002/02/11 dam's <damien@mandrakesoft.com>
-
- * share/list: added modinfo
-
- * network/netconnect.pm: added cancel for first step
-
-2002/02/11 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: fixed syntax error...
-
- * Xconfigurator.pm: avoid testing fbdev driver.
-
- * install_steps.pm: added Aurora or bootsplash for getting a need on frame
- buffer.
- added fbdev for GeForce Integrated.
-
-2002/02/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po, share/po/vi.po, share/po/hu.po: updated Danish,
- Hungarian and Vietnamese files
-
-2002/02/11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: booh, fpons was faster than me on "bootsplash wanting
- fb". Keeping my solution ;p
-
- * c/stuff.xs.pm: "standard_charset" and "iconv" are needed even when C_RPM
- is undefined
-
- * any.pm: allow to edit the initrd field (thx to randy.k.wilson)
-
- * install_any.pm (@needToCopy): add "ntp"
-
-2002/02/11 warly
-
- * share/rpmsrate: remove dev from INSTALL, the sun is rising, and there
- are no more needs to have ppp in the INSTALL section, as the darkness is
- going away...
-
-2002/02/10 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: in case there is both ata66 (hde) and ata33 hard drives, go to
- expert
- questions directly (it would need a semi_auto asking on which drive the
- bios
- boots...)
-
-2002/02/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
-2002/02/09 daouda
-
- * share/rpmsrate:
- - add rfbdrake to NETWORKING_REMOTE_ACCESS and
- NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help.pm file
-
- * share/po/fi.po, share/po/DrakX.pot, share/po/help_xml2pm.pl,
- share/po/es.po, share/po/fr.po, share/po/sv.po, share/po/da.po,
- share/po/de.po, share/po/hu.po, share/po/it.po, share/po/eu.po: merged
- with the manual help
-
-2002/02/09 warly
-
- * share/rpmsrate: add ppp in INSTALL
- add dev in INSTALL
-
-2002/02/08 dam's <damien@mandrakesoft.com>
-
- * pixmaps/wiz_drakgw.png, pixmaps/wiz_default_up.png,
- pixmaps/wiz_firewall.png, pixmaps/wiz_draknet.png: new gfx
-
- * network/network.pm: corrected wireless modules
-
-2002/02/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/locales-skeleton.tar.bz2: Added choice of charset for
- various languages
-
-2002/02/08 Pixel <pixel@mandrakesoft.com>
-
- * docs/SHORTCUTS: add F1 & F2
-
-2002/02/08 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added instructions for scanning on HP's MF devices to
- the printer help page.
- HP PhotoSmart printers do not scan, so do not show how to scan with
- them.
- Do not let dialogs of network configuration correction appear embedded
- in the "Add printer" wizard.
- Completed wizard mode for adding a printer in both recommended and
- expert mode.
-
- * printer.pm: Enabled transferring queues of HP multi-function devices
- between spoolers.
- CUPS 1.1.13 dies on SIGHUP, do normal restart instead.
- Completed wizard mode for adding a printer in both recommended and
- expert mode.
-
-2002/02/08 warly
-
- * share/rpmsrate: add bootsplash in system 4
-
-2002/02/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/07 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm: fix error causing a bad window sizing when there is
- a horiz scroll
-
-2002/02/07 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: fixed shadow when testing X
-
-2002/02/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/help_xml2pm.pl: fixed email address
-
-2002/02/07 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/smbnfs_gtk.pm:
- - don't pop the "do you want to install samba?"
- - rwindow is not a window when embedded, so set_default_size only if
- possible
-
- * my_gtk.pm: make perl_checker happy
- ensure no more than one child is in the Plug
-
- * interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
- * interactive_gtk.pm: fix error causing a bad window sizing when there is
- a horiz scroll
- (exit): ensure USR1 is sent to mcc
-
- * Xconfigurator.pm: allow to edit the hsyncrange and vsyncrange when
- choosing monitor "Custom"
-
- * install2.pm, install_steps.pm: create and use miscellaneousAfter (so
- that SECURE_LEVEL is set *after* asking)
-
- * diskdrake/interactive.pm (Options): wrap the help text
-
- * standalone/diskdrake: handle --embedded xxx xxx
-
-2002/02/07 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * standalone/drakxtv, Makefile.config: add drakxtv (scantv gui)
-
- * standalone/localedrake: fix pixel stuff: don't restart wm on cancel
-
-2002/02/07 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: beta 2
-
- * printerdrake.pm: corrected wizard pb
-
- * my_gtk.pm: wizard fixes
-
-2002/02/07 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount): precise the type when mounting in standalone (for smb,
- nfs would not need it)
-
- * diskdrake/smbnfs_gtk.pm:
- - don't pop the "do you want to install samba?"
- - rwindow is not a window when embedded, so set_default_size only if
- possible
-
- * interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
- * my_gtk.pm: ensure no more than one child is in the Plug
-
- * standalone/diskdrake: handle --embedded xxx xxx
-
- * interactive_gtk.pm (exit): ensure USR1 is sent to mcc
-
-2002/02/06 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: removed ugly pink and ugly left bar for wizard mode
-
-2002/02/06 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem, tools/oem-prepare: better handling of group linked
- to hardware or options.
-
-2002/02/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: have frozen-bubble in GAMES at level 4
-
-2002/02/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po, share/po/fi.po, share/po/DrakX.pot: updated French file
-
-2002/02/06 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Automatic configuration of the scanning part of HP's
- multi-function devices.
-
- * printerdrake.pm: Added some stuff for the Wizard mode.
- Automatic configuration of the scanning part of HP's multi-function
- devices.
- Updated automatic package installation in printerdrake, no "kups" and
- "qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
- "rpmsrate" and "rpmsrate.server" appropriately.
-
- * share/rpmsrate.server, share/rpmsrate: Added scanning packages to
- INSTALL section, for HP MF device installation by printerdrake.
- Updated automatic package installation in printerdrake, no "kups" and
- "qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
- "rpmsrate" and "rpmsrate.server" appropriately.
-
-2002/02/05 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
- HP's multi-function devices.
-
-2002/02/05 dam's <damien@mandrakesoft.com>
-
- * standalone/logdrake: wizard updated
- correction for mcc.
-
-2002/02/05 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate.server: synced with normal rpmsrate for Basque
- management.
-
- * install2.pm: auto_allocate for oem mode is not needed as oem script
- create all necessary partition.
-
- * install_any.pm: add support for Basque (no KDE).
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: newer syslinux 1.67.
-
- * share/rpmsrate: add support for Basque (no netscape in such case)
-
- * rescue/tree/etc/oem: select preferred kernel as kernel-\d.
-
- * install_steps.pm: fixed logic, when someone want /root/drakx,
- it has to check /root/drakx and not /root only.
-
-2002/02/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/tree/sbin/modprobe: don't do insmod -f, it's not really necessary
- and it taints the kernel (pabo)
-
- * rescue/tree/etc/profile: use LD_LIBRARY_PATH in rescue so that PATH'ing
- in /mnt
- can really be used
-
-2002/02/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/05 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
- * Xconfigurator.pm: testFinalConfig now always returns true if test is
- skipped because of a bad_card (back to the old behaviour, this was no
- good (the aim is to enable changing the monitor when test is skipped))
-
- * share/po/fr.po: fix "Details" translated in "Détails de la partition"
- but is used at different
- place where the meaning has nothing to do with "partitions"
-
-2002/02/05 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
- HP's multi-function devices.
-
-2002/02/05 warly
-
- * share/compssUsers.server: remove non server group from rpmsrate.server
- add utilities group in compssUser.server
- (webmin,ssh-server,wizards,monitoring)
-
- * share/rpmsrate.server: begin rpmsrate.server cleaning
-
-2002/02/05 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
- * Xconfigurator.pm: testFinalConfig now always returns true if test is
- skipped because of a bad_card (back to the old behaviour, this was no
- good (the aim is to enable changing the monitor when test is skipped))
-
-2002/02/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: log the "chkconfig --del gpm" when there is a serial
- mouse
-
-2002/02/04 dam's <damien@mandrakesoft.com>
-
- * standalone/logdrake: corrected typo. Yvounet, check your code!!
- embedded, explain
-
- * my_gtk.pm: bug correction
-
- * standalone/drakfont, services.pm, network/netconnect.pm: applied cooker
- guy english review
-
-2002/02/04 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added v4l module all the time (along with dbe already
- present).
-
-2002/02/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps.pm: have numlock activated when isLaptop rather than
- $o->{pcmcia}
-
-2002/02/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
- share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po,
- share/po/sr.po, share/po/el.po, share/po/et.po, share/po/sk.po,
- share/po/tr.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
- share/po/uk.po, share/po/eo.po, share/po/nl.po, share/po/wa.po,
- share/po/sv.po, share/po/zh_TW.po: updated some po files
-
-2002/02/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: fix creating /etc/security/msec/server
-
- * share/po/fr.po: fix "More" translation
-
-2002/02/04 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Made HP multi-function devices configured
- with HPOJ being displayed correctly by printerdrake.
-
- * detect_devices.pm: Replace "Hewlett-Packard" by "HP" when HP device is
- detected on a parallel port.
-
-2002/02/04 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: update french translations
-
-2002/02/03 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: force a few more "list"s instead of "combo" boxes
- since "format" is now handled for combo boxes, combo boxes are used in
- much too many places. Fix this by forcing type "list" for some cases,
- and using type "list" when a ask_from has only one entry
-
- * interactive.pm: since "format" is now handled for combo boxes, combo
- boxes are used in much too many places. Fix this by forcing type "list"
- for some cases, and using type "list" when a ask_from has only one entry
-
- * bootloader.pm:
- - fix some vga text modes 80x30
- - chmod 600 lilo.conf when a password is given
- - fix general "append"
- (thanks to David Eastcott)
- "password" works without "restricted", not the other way round (reported
- by David Eastcott)
- fix typo
-
-2002/02/03 warly
-
- * share/rpmsrate.server: synchronize with current cooker rpmsrate
-
-2002/02/03 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: force a few more "list"s instead of "combo" boxes
- since "format" is now handled for combo boxes, combo boxes are used in
- much too many places. Fix this by forcing type "list" for some cases,
- and using type "list" when a ask_from has only one entry
-
- * interactive.pm: since "format" is now handled for combo boxes, combo
- boxes are used in much too many places. Fix this by forcing type "list"
- for some cases, and using type "list" when a ask_from has only one entry
-
- * bootloader.pm: fix typo
- help lilo when there is hdd with no hdc drive (needs testing!)
-
-2002/02/03 warly
-
- * share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
- compssUsers.server
-
-2002/02/03 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: help lilo when there is hdd with no hdc drive (needs
- testing!)
-
-2002/02/03 warly
-
- * share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
- compssUsers.server
-
-2002/02/02 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: XFree is now 4.2
-
- * standalone/fileshareset: fix dropping samba sections which don't have
- any "path="
-
-2002/02/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po, share/po/DrakX.pot: updated Swedish file
-
- * share/po/fr.po: merged again French file to recover some lost strings;
- and added non breakable spaces at all the needed places as required
- by French typography
-
-2002/02/01 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm: please perl_checker
-
- * install_interactive.pm: use from_Mb for choosing the size of the windows
- partition
-
- * install_steps.pm: create symlink /etc/security/msec/server in security >
- 3
-
-2002/02/01 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: First steps of the implementation for the "Add printer"
- wizard.
-
- * detect_devices.pm: Made auto-detection working for HP DeskJet 840C on
- USB
- General improvements for reliability of USB printer auto-detection
-
-2002/02/01 yduret
-
- * pixmaps/wiz_scannerdrake.png: readding it with -kb option (i am still
- jeune and boulet)
- rm for readding with -kb option (i am jeune and boulet)
-
- * standalone/logdrake: ergo fix thx dadou report
- fix --explain=foo bug that prevent to show anything
-
- * bootlook.pm: ergo fix thx dadou report...
-
-2002/02/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * services.pm, standalone/drakbackup, printerdrake.pm,
- standalone/logdrake: changed some strings to make translation easier
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/01 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm: please perl_checker
-
- * install_interactive.pm: use from_Mb for choosing the size of the windows
- partition
-
- * Xconfigurator.pm: testFinalConfig now returns false if test is skipped
- because of a bad_card or
- verybad_card and $skip_badcard is not set
-
-2002/01/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/keyboards.tar.bz2, keyboard.pm: Added Tamil language and
- keyboard choices (KDE is translated to Tamil)
-
-2002/01/31 yduret
-
- * pixmaps/wiz_scannerdrake.png: on rajoute la zolie image
-
-2002/01/30 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * Xconfigurator.pm: Added setting of model=jp106 for Japanese keyboard
-
- * keyboard.pm, share/keyboards.tar.bz2: Added Bulgarian "phonetic"
- keyboard
-
- * lang.pm: Enabled "ms" language in the language selection list (there are
- Gnome and KDE
- translations for it)
-
- * share/po/be.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
- share/po/es.po, share/po/bg.po, share/po/de.po, share/po/et.po,
- share/po/el.po, share/po/ru.po, share/po/br.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/nl.po, share/po/ro.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po:
- updated some po files
-
-2002/01/30 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: add gnome-core in GNOME (used to be required?)
-
- * Xconfigurator_consts.pm, Xconfigurator.pm: move "what is the
- running_window_manager" and "ask_window_manager_to_logout" to any.pm
-
- * any.pm (ask_window_manager_to_logout, running_window_manager): created
- from Xconfigurator and cleaned
- (selectLanguage): if $langs is empty, don't ask for "other languages"
-
- * pixmaps/wiz_printerdrake.png: re-adding with -kb
- removing for re-adding with -kb
-
- * standalone/localedrake: now works in normal user: it modifies the
- ~/.i18n (todo: handle kde crazy variables?)
-
- * lang.pm: handle read'ing and write'ing to a specified file (useful
- example: ~/.i18n)
-
-2002/01/30 sdupont
-
- * standalone/drakbackup: complex merging....
- change /var/drakbackup to /var/lib/drakbackup
- crontab update
- mail report update
- sendmail update
- require rpm mode
- code optimisation
- remove about gi
- new help function
-
-2002/01/29 Till Kamppeter <till@mandrakesoft.com>
-
- * pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
- printerdrake.
-
- * printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
- wizard.
- Improvements for the selection of a local printer, especially when no or
- one printer was detected.
-
-2002/01/29 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: icons placements are better
-
-2002/01/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakbug_report, standalone/drakautoinst, install2.pm,
- install_any.pm, install_steps.pm, log.pm, docs/README, pkgs.pm: move
- /root/* files (ddebug.log, install.log, report.bug,
- auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
- and also save stage1.log there
-
- * partition_table_raw.pm: add new pixel-made grub signature
-
- * crypto.pm: update land2tzs accordingly to new url2land
- Add url2land entries for nl, it, at
-
- * any.pm: move /root/* files (ddebug.log, install.log, report.bug,
- auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
- and also save stage1.log there
- rephrase a little bit highest level
- to not refer to "level 4" anymore
- use formatAlaTeX for describing security levels
-
- * install_steps_interactive.pm: fix thanks to chipaux msg about mkbootdisk
-
-2002/01/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po, share/po/sv.po, share/po/hr.po, share/po/de.po,
- share/po/DrakX.pot, help.pm, share/po/it.po, share/po/eu.po,
- share/po/es.po: updated pot file with help messages from manual
-
-2002/01/29 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm: handle "format" for combo's
-
- * bootloader.pm: use the new format for combo's to clean code handling
- {vga} field
-
- * diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
- * any.pm: use the new format for combo's to clean code handling {vga}
- field
- handle the case where samba and/or nfs-utils are not installed
-
- * install_steps.pm: move the various bootloader::add_append's in
- setupBootloaderBefore
-
- * diskdrake/smbnfs_gtk.pm: handle the case where samba and/or nfs-utils
- are not installed
-
- * install_steps_interactive.pm: visually unselect X and docs when minimal
- install
- "With X" choice is now working
- handle "Cancel" on language selection
-
-2002/01/29 Till Kamppeter <till@mandrakesoft.com>
-
- * pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
- printerdrake.
-
- * printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
- wizard.
- Improvements for the selection of a local printer, especially when no or
- one printer was detected.
-
-2002/01/29 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * interactive.pm: fix pixel's minimal example using interactive.
-
-2002/01/29 yduret
-
- * docs/interactive/ask_from_list, docs/interactive/wait_message,
- docs/interactive/ask_from_treelist, docs/interactive/ask_from_listf,
- docs/interactive/ask_from: added some snipet coe for example
-
- * standalone/logdrake: logdrake is now under gi/perl-install/standalone
-
-2002/01/29 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
- * install_steps.pm: move the various bootloader::add_append's in
- setupBootloaderBefore
-
-2002/01/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: do the few new translations
-
- * standalone.pm: try to reflect hierarchy for */*.pm
-
-2002/01/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
- share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
- printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
- share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
- standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
- share/po/id.po: Corrected various English typos
-
-2002/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: fix typo
-
- * partition_table.pm: warn if partitions have been renumbered due to a
- partition being added or removed
-
- * diskdrake/interactive.pm: don't warn_if_renumbered during install
- warn if partitions have been renumbered due to a partition being added
- or removed
-
-2002/01/28 siegel
-
- * share/po/de.po: new german version
-
-2002/01/28 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Replaced "sleep" commands by a subroutine which waits
- exactly until CUPS is ready.
- CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
- is not "known" to it.
-
- * printer.pm: Removed debug helper line.
- Replaced "sleep" commands by a subroutine which waits exactly until CUPS
- is ready.
- CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
- is not "known" to it.
-
-2002/01/28 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/br.po: update brezhoneg translations
-
- * share/po/fr.po: more french translations
-
-2002/01/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
- share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
- printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
- share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
- standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
- share/po/id.po: Corrected various English typos
-
-2002/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: fix typo
-
- * diskdrake/interactive.pm, partition_table.pm: warn if partitions have
- been renumbered due to a partition being added or removed
-
-2002/01/28 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm, network/netconnect.pm: debug network testing
-
-2002/01/28 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated color of
- scroll bar and reduced its size.
-
- * bootloader.pm: fixed get_append if key=mem.
- timeout passed to 10 instead of 5.
-
-2002/01/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: update games rates
-
-2002/01/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (remove_advertising): ensure removing /tmp/drakx-images
- can't fail
-
- * any.pm: simpler&nicer solution for writing kppprc in utf8
- have kppprc strings in utf8
-
- * detect_devices.pm: remove test code
-
- * install_steps.pm, bootloader.pm: cleanup perImageAppend code (hopefully
- handling nicely the mem=nopentium case)
-
- * diskdrake/smbnfs_gtk.pm: don't use wait_message's when waiting (waiting
- is usually very short), use a waiting cursor instead.
- (the wait_message's were causing bad interactivity stuff)
-
-2002/01/27 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm: add a minimal example
-
- * services.pm:
- - move the require on my_gtk to ask_standalone_gtk
- - cleanup
-
- * Makefile.config:
- - adapt to new diskdrake modules
- - add logdrake to STANDALONEPMS_
-
- * my_gtk.pm: strange protection against ensure_focus generating a "focus"
- event causing a
- dead-loop (reminder: ensure_focus helps ensuring a widget is focused)
-
- * Makefile.drakxtools, standalone.pm, Makefile, diskdrake_interactive.pm,
- install_interactive.pm, diskdrake.pm:
- - adapt to new diskdrake modules
- - some cleanup in drakxtools build
-
- * diskdrake/removable.pm: remove debugging code
- new diskdrake modules (diskdrake_interactive is now
- diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
- created from diskdrake.pm)
-
- * diskdrake/interactive.pm, diskdrake/hd_gtk.pm,
- diskdrake/removable_gtk.pm: new diskdrake modules (diskdrake_interactive
- is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk,
- others created from diskdrake.pm)
-
- * diskdrake/smbnfs_gtk.pm: fix updating the actions
- new diskdrake modules (diskdrake_interactive is now
- diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
- created from diskdrake.pm)
-
- * network/nfs.pm: find_exports: add a timeout
-
- * fs.pm: new function fstab_to_string
-
- * standalone/diskdrake: handle --removable *and* --removable=<dev>
- handle --removable=<dev>
- - new options --hd, --nfs, --smb, --removable
- - adapt to new diskdrake modules
- - save $all_hds->{current_fstab} to know if /etc/fstab must be saved
-
-2002/01/25 fabman
-
- * share/po/es.po: updated spanish translation
-
-2002/01/25 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: add devfsd
-
- * install_any.pm: remove_advertising: use rm_rf since we don't have the
- real list of files (the .pl's are not in @advertising_images)
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Less important options only shown when
- "Advanced" button clicked.
- Handling of cursor position in the main window improved.
- Handling of empty printer queue list in main window improved.
- Removed line breaks from longer texts, so that text flows into window
- nicely
- Minor text improvements.
-
-2002/01/25 dam's <damien@mandrakesoft.com>
-
- * install_any.pm: advertising engine updated
-
- * share/logo-mandrake.png: beta logo
-
- * install_steps_gtk.pm: corrected decy
- advertising engine updated
-
-2002/01/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: please find a better fix
-
-2002/01/25 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
- linux
- fix spelling
-
- * Makefile: call clean-rpmsrate
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm, install_any.pm: advertising engine updated
-
- * share/po/fr.po: typo
-
- * share/logo-mandrake.png: beta logo
-
-2002/01/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: please find a better fix
-
-2002/01/25 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/Makefile: ensure errors propagate
-
- * bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
- linux
- fix spelling
-
- * Makefile: call clean-rpmsrate
-
- * mdk-stage1/pci-resource/Makefile: silly shell
- ensure errors propagate
-
-2002/01/25 dam's <damien@mandrakesoft.com>
-
- * share/po/fr.po: typo
- corrected too long label Mise ŕ niveau deas paquetages seule. please
- find a better FIX
-
-2002/01/25 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: cosmetic changes.
-
- * pkgs.pm: fixed try opening to trigger changeCD callback.
-
-2002/01/24 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate:
- - add msec in any install
- - use BIGMEM flag for kernel-enterprise
- - use SMP flag for kernel-smp
- (those 2 goes together with Warly's clean-rpmsrate)
- add flag DOCS which should work together with !excludedocs
-
- * any.pm: ensure grub is installed if grub is chosen
-
- * install_any.pm:
- - add DOCS (based on !excludedocs)
- - set BIGMEM and SMP flags
- (since kernel-smp and kernel-enterprise sub-numbers are better handled
- by
- rpmsrate together with Warly's clean-rpmsrate)
-
- * install_steps_interactive.pm, install2.pm: minimal install now handles
- excludedocs
-
- * install_steps.pm: log excludedocs
- minimal install now handles excludedocs
- put devfs=mount only if devfsd is installed
-
- * diskdrake_interactive.pm: truncate lvm name to 63 characters since
- longer vg names are not allowed
-
-2002/01/24 Till Kamppeter <till@mandrakesoft.com>
-
- * detect_devices.pm, printer.pm, printerdrake.pm: Fixed bug of empty menu
- entry appearing after adding a new printer.
- Modified "Local Printer" dialog to be more newbie-friendly.
-
-2002/01/23 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm: updated speedtouch code to use pppoa3
-
- * my_gtk.pm: removed font loading
-
-2002/01/23 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: fixed to allow multiple mem=xxx parameter (especially
- mem=nopentium).
-
- * install_steps.pm: restored mem=nopentium.
- removed mem=nopentium.
-
-2002/01/23 Pixel <pixel@mandrakesoft.com>
-
- * standalone/fileshareset: name mangling max length set to 12
- use name mangling for samba labels
-
-2002/01/23 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: New user interface in main window
- More printer info in printer modification window
- Better support for remote CUPS printers
-
-2002/01/22 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: improved widget_icons
-
- * install_steps.pm: added net_cnx_pg output when configuring network in
- auto install
-
-2002/01/22 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added support to save already existing synthesis file.
-
- * install_any.pm: changed code to build synthesis file, check if they have
- not already been copied
- from mirror, or build them using parsehdlist.
-
-2002/01/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: Translate a few things more
-
-2002/01/22 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: cleanup error messages (and fix diskdrake's)
- defaults to ext3 instead of ext2
-
- * interactive.pm: add "quit_if_double_click" and "tree_expanded" flags
- (request from till)
- add feature "allow_empty_list" for "list" entries (disables the special
- cases for 0 and 1 element lists)
-
- * install_any.pm, diskdrake.pm: cleanup error messages (and fix
- diskdrake's)
-
- * install_interactive.pm, raid.pm: defaults to ext3 instead of ext2
-
- * partition_table.pm: remove unused auto_win_extended stuff
- handle extended partitions with no partitions inside (esp. for the first
- hda5 & windows XP)
-
- * bootloader.pm:
- - fix default not being formatted like labels for lilo
- - check the label is not already used *case-sensitively*
- - check a kernel_or_dev is given
-
- * any.pm:
- - remove the default entry when that entry is removed
- - use allow_empty_list for displaying the entries
- - fix default not being formatted like labels for lilo
- - check the label is not already used *case-sensitively*
- - check a kernel_or_dev is given
-
- * fsedit.pm: yet again better error reporting
- defaults to ext3 instead of ext2
-
- * standalone/drakboot, bootlook.pm: fix yves's code duplication of
- lilo_choice (use $::lilo_choice in bootlook)
-
- * interactive_gtk.pm: add "quit_if_double_click" and "tree_expanded" flags
- (request from till)
-
- * install_steps_interactive.pm: cleanup error messages (and fix
- diskdrake's)
- better messages for the minimal installs
-
- * standalone/diskdrake: yet again better error reporting
- cleanup error messages (and fix diskdrake's)
-
- * share/rpmsrate: move mandrake-mime from SYSTEM to X
- lower sndconfig
-
-2002/01/22 fcrozat
-
- * share/rpmsrate: Really install gnome control center when installing
- GNOME
-
-2002/01/22 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: added mem=nopentium for any Athlon or Duron processor.
-
-2002/01/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * Makefile: exclude standalone from testing
-
- * share/po/fr.po: resolve small conflict
-
-2002/01/22 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: add the new "mii" module to 'net_raw'
-
- * install_steps_interactive.pm: better messages for the minimal installs
- fix a few cancel's (reported by slegros)
- don't ask security level in non-expert
-
- * install_steps_gtk.pm, install_interactive.pm: fix a few cancel's
- (reported by slegros)
-
- * share/rpmsrate: move mandrake-mime from SYSTEM to X
- lower sndconfig
-
-2002/01/21 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
- * install_steps_interactive.pm, install2.pm: can't call
- any::config_libsafe so early during install, move it where msec is
- called
-
- * any.pm: quiet perl's warning
-
-2002/01/21 dam's <damien@mandrakesoft.com>
-
- * install_steps.pm: fixed network conf in auto install
- corrected network down
-
- * my_gtk.pm: removed debug print
- icons widget improvment : icon placment, highlighting
-
-2002/01/21 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: increase the size of the "Choose action" box
-
- * diskdrake_interactive.pm: remove the "Active" partition feature
-
- * interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
- * install2.pm: can't call any::config_libsafe so early during install,
- move it where msec is called
-
- * install_steps_interactive.pm: can't call any::config_libsafe so early
- during install, move it where msec is called
- cleanup, update, enhance security level choice
-
- * standalone/draksec: cleanup, update, enhance security level choice
-
- * install_steps.pm: remove deprecated msec groups adding
- cleanup
-
- * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: newer grub
-
- * any.pm: quiet perl's warning
- cleanup, update, enhance security level choice
- when creating users, add handling of xgrp/rpm/adm/wheel groups in high
- security
- fix advice about "usermod -G"
-
- * tools/i386/netboot/menu.lst.example: add gateway parameter
-
-2002/01/21 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: new ugly icon
-
- * install_steps.pm: corrected network down
-
-2002/01/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/21 Pixel <pixel@mandrakesoft.com>
-
- * share/fonts.tar.bz2: add helvR12_iso15
-
- * install_steps_interactive.pm: """ When I choose a / partition smaller
- than 200 MB, the installation
- gives me an error message complaining that my system does not
- have enough free space for the installation, although basesystem
- install
- require less than 100 MB. """
- up to around 250MB, minimal install is chosen.
- questions are: base system only, or no X, or normal.
-
-2002/01/21 siegel
-
- * share/po/de.po: updates
-
- * standalone/drakbackup: fixed i18n bugs
-
-2002/01/20 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: call msec with run_commands=0 to fix the network reloading
- (causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakbackup: sorry, _("$_") is not allowed
-
-2002/01/20 Pixel <pixel@mandrakesoft.com>
-
- * share/po/fr.po: fix "`msgid' and `msgstr' entries do not both end with
- '\n'"
-
- * install2.pm: call msec with run_commands=0 to fix the network reloading
- (causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20 yduret
-
- * timezone.pm: added Italy (time.ien.it) in
-
-2002/01/19 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * standalone/drakbackup: Rework English syntax in drakbackup - hopefully
- I've got the intent correct ;^)
-
-2002/01/19 Till Kamppeter <till@mandrakesoft.com>
-
- * detect_devices.pm: Replaced USB printer auto-detection by a more
- reliable method.
-
-2002/01/18 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: changed Update -> Upgrade for installation
- class.
-
-2002/01/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/draknet:
- - move 'use standalone' up to comply to 'explanations'
- - fix an english typo, s/connexion/connection/
-
- * standalone/drakgw:
- - move 'use standalone' up to comply to 'explanations'
- - write higher-level 'explanations'
- - small fix, s/`ls ..`/glob(..)/
-
- * standalone/scannerdrake:
- - move 'use standalone' up to comply to 'explanations'
- - fix a small english problem
-
- * share/po/fr.po: reduce a lot of fuzzy and untranslations
- large stuff from printerdrake, drakbackup and drakfont still to do :-)
-
- * c/stuff.xs.pm, standalone/printerdrake, standalone/net_monitor,
- standalone/drakautoinst, standalone/keyboarddrake,
- standalone/localedrake, standalone/livedrake, standalone/drakboot,
- standalone/draksec, standalone/tinyfirewall, standalone/mousedrake,
- standalone/drakxservices, standalone.pm, standalone/drakproxy,
- standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
- standalone/drakxconf, log.pm, standalone/logdrake,
- standalone/drakbackup, standalone/drakfont:
- - write the 'common' part of the 'explanations' stuff,
- with nice help from Pixel for the tough Perl part
- - move 'use standalone' up in all standalone apps,
- to comply to 'explanations'
-
-2002/01/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2,
- share/fonts.tar.bz2: changes to get in line with new XFree86
-
-2002/01/18 Pixel <pixel@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
- locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: add update flag for urpmi medium.
-
- * install_steps_interactive.pm: even if user cancel update of package on
- tree, allow urpmi to install the medium.
- avoid downNetwork as no difference are made between ethernet or ppp.
- fixed typo.
- allow cancel when installUpdates.
-
- * crypto.pm: add update medium for crypto for urpmi (flag update).
- fixed typo.
- allow selection/deselection of update medium (for cancel of
- installation).
-
- * install_steps_gtk.pm: allow choosePackageTree to display a cancel if a
- specific medium has been given.
-
-2002/01/18 Pixel <pixel@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
- locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18 sdupont
-
- * standalone/drakfont: update warning messages (qa).
-
- * standalone/drakbackup: fix traduction problems and more ...
-
-2002/01/17 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm, diskdrake_interactive.pm: better error message when auto
- allocate doesn't do anything
-
-2002/01/17 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm, network/netconnect.pm: draknet : success message only
- if success
-
- * my_gtk.pm: added timeout for redrawing icon widget
-
-2002/01/17 fcrozat
-
- * share/rpmsrate: kdebase-nsplugins will be installed by default when
- selecting KDE
-
-2002/01/17 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: avoid upgrading a package by selection on files unless it has
- been obsoleted.
-
-2002/01/17 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: check the mountpoint is valid for encrypting (disallow "/"
- and "/usr")
-
- * fsedit.pm, diskdrake_interactive.pm: better error message when auto
- allocate doesn't do anything
- check the mountpoint is valid for encrypting (disallow "/" and "/usr")
-
- * fs.pm: do not create /swap
-
- * services.pm: move service apcupsd from Printing to System
-
- * bootloader.pm: fix many disks bios remapping (esp. booting on scsi when
- ide is present)
-
-2002/01/17 sdupont
-
- * standalone/drakbackup: stable version for qa pkg.
- (without unstables options)
-
-2002/01/16 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix cancel on scsi module loading
-
-2002/01/16 sdupont
-
- * standalone/drakbackup: update send mail.
- (pixel mode. ;))
-
-2002/01/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps_interactive.pm: installUpdates: use formatAlaTeX
-
-2002/01/16 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix cancel on scsi module loading
-
- * install_steps_interactive.pm: don't drop default_packages in "Base
- system only"
-
- * standalone/fileshareset: add locking to ensure things are in a proper
- state
-
-2002/01/15 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: advertising engine amelioration
-
- * my_gtk.pm: automatic icon placement in icon_labels_widget
-
-2002/01/15 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: remove the test trick
- encrypted filesystem handling:
- - using losetup
- - add "Options" for partitions in diskdrake (expert mode)
-
- * c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
- diskdrake.pm: encrypted filesystem handling:
- - using losetup
- - add "Options" for partitions in diskdrake (expert mode)
-
-2002/01/15 dam's <damien@mandrakesoft.com>
-
- * network/isdn_consts.pm: updated
-
-2002/01/15 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: remove the test trick
- encrypted filesystem handling:
- - using losetup
- - add "Options" for partitions in diskdrake (expert mode)
-
- * c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
- diskdrake.pm: encrypted filesystem handling:
- - using losetup
- - add "Options" for partitions in diskdrake (expert mode)
-
- * any.pm: have ddcxinfos take the best result of every run
-
-2002/01/15 sdupont
-
- * standalone/drakfont: fix progress bar problem.
- some gi updates:
- - windows font importation.
- - advanced font importation.
- - licence interface.
- - ...
-
- * standalone/drakbackup: new ./drakbackup --show-conf
- fix daemon problem (media to use).
- update informations on drakbackup report mail.
- __ 3290 lines.
- man pages fr created.
- some code cleaning on backend mode. (all_user_list && return_path)
- new functions on backend mode:
- - show-conf
- - debug
- - help
- - version.
-
-2002/01/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm:
- - eata is SCSI adapter, not 'disk' adapter
- - have eata module in boot floppies
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: we need also "big" modules in
- pci ids
-
- * share/rpmsrate: have lbreakout weigthed 4 instead of 2
-
- * mdk-stage1/modules.c: suggest other.img in file-not-found-in-archive
- (sugg David Faure
- and Pixel)
-
-2002/01/14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: fix typo (making auto installs working again)
-
-2002/01/13 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: s/lbreakout/lbreakout2/
-
- * install_steps_interactive.pm: cleanup
-
-2002/01/13 sdupont
-
- * standalone/drakbackup: some updates ...
- in "more option" steps user could choose to receive a report by mail for
- each backups.
- ftp backup work.
- fix time problems.
- remove doc from file.
- security fix for configuration file.
-
-2002/01/11 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: advertising engine works !
- champagne.
- still some display bugs, but they will be corrected later.
- need new ads and adequat description file
- new advertising engine
-
- * install_any.pm: modifications for new avertising engine
-
- * my_gtk.pm: new icons placement
-
-2002/01/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po,
- share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po,
- share/po/tr.po, share/po/ar.po, share/po/az.po, share/po/eu.po,
- share/po/sl.po, share/po/vi.po, share/po/eo.po, share/po/wa.po,
- share/po/sv.po, share/po/zh_TW.po, share/po/Makefile, share/po/af.po,
- share/po/it.po: updated Spanish file; merged help-* files
-
-2002/01/11 sdupont
-
- * standalone/drakbackup: update header pixmaps.
- correction of message problem.
-
- * pixmaps/drakfont.620x57.png, pixmaps/BDO-drakebackup1.png,
- pixmaps/drakbackup.540x57.png: update pixmaps for drakbakup & drakfont.
-
- * standalone/drakfont: update header pixmaps.
-
-2002/01/10 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: domainname corection
-
- * network/network.pm: domainname corection
- corrected network domainname pb
-
- * install2.pm: corrected read_resolv => read_conf
-
-2002/01/10 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: english taste inspired by daminette.
-
-2002/01/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/lsparts: better looking output of type of partition (%x => %0x)
-
-2002/01/09 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, standalone/net_monitor, standalone/draknet,
- network/network.pm, network/modem.pm, network/netconnect.pm: big merge
- from update 8.1 with cvs
- First part. Part 2 following
-
- * my_gtk.pm: added bold option in text creation. Some corrections
-
- * install_steps_interactive.pm: corrected fpons typo
-
-2002/01/09 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed too many package selected for No X or With X
- option of minimal installation.
-
- * install_steps_interactive.pm: avoid asking for minimal install for
- upgrade.
-
- * crypto.pm: fix incomplete prefix for update mirror when adding an entry
- for urpmi.
-
- * pkgs.pm: use rpm version comparison function.
-
- * c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed too many package selected for No X or With X
- option of minimal installation.
-
- * install_steps_interactive.pm: avoid asking for minimal install for
- upgrade.
-
- * crypto.pm: fix incomplete prefix for update mirror when adding an entry
- for urpmi.
-
- * pkgs.pm: use rpm version comparison function.
-
- * c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed too many package selected for No X or With X
- option of minimal installation.
-
- * install_steps_interactive.pm: avoid asking for minimal install for
- upgrade.
- fixed stupid.
-
- * crypto.pm: fix incomplete prefix for update mirror when adding an entry
- for urpmi.
-
- * pkgs.pm: use rpm version comparison function.
-
- * c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/08 dam's <damien@mandrakesoft.com>
-
- * install2.pm: cosmetik
-
-2002/01/08 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: added eval around pixmap drawing for advertising.
-
-2002/01/08 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakbackup: another round of bad use of _() fixes.
- fixed bad use of _().
-
-2002/01/08 sdupont
-
- * standalone/drakbackup: drakbackup work ...
- incremental backup and restore work.
-
-2002/01/08 François Pons <fpons@mandrakesoft.com>
-
- * Makefile: again fixed dam's sucking, please dam's check what you write
- before commiting.
-
- * standalone/drakautoinst: removed stupid invocation of _("$_"), is it
- correct code to change it to $_ only ?
-
-2002/01/08 François Pons <fpons@mandrakesoft.com>
-
- * Makefile: again fixed dam's sucking, please dam's check what you write
- before commiting.
-
- * standalone/drakautoinst: removed stupid invocation of _("$_"), is it
- correct code to change it to $_ only ?
-
-2002/01/08 François Pons <fpons@mandrakesoft.com>
-
- * Makefile: again fixed dam's sucking, please dam's check what you write
- before commiting.
-
-2002/01/07 François Pons <fpons@mandrakesoft.com>
-
- * steps.pm: changed installUpdates after summary (to get corrected
- timezone).
-
- * install_any.pm: separated setDefaultPackages from setPackages because it
- is used by allowing
- only base system to be installed (allow remade a better package
- selection).
-
- * crypto.pm: added bestMirror method to retrieve a good mirror (according
- to timezone) and
- add salt with random number to avoid using always the same.
-
- * install2.pm: added option to only upgrade packages.
-
- * install_steps_interactive.pm: added minimal type of install support.
-
- * share/list: fixed to match newer menu package.
-
-2002/01/07 François Pons <fpons@mandrakesoft.com>
-
- * steps.pm: changed installUpdates after summary (to get corrected
- timezone).
-
- * install_any.pm: separated setDefaultPackages from setPackages because it
- is used by allowing
- only base system to be installed (allow remade a better package
- selection).
-
- * crypto.pm: added bestMirror method to retrieve a good mirror (according
- to timezone) and
- add salt with random number to avoid using always the same.
-
- * install2.pm: added option to only upgrade packages.
-
- * install_steps_interactive.pm: added minimal type of install support.
-
- * share/list: fixed to match newer menu package.
-
-2002/01/07 dam's <damien@mandrakesoft.com>
-
- * Makefile: socmetic
- typo
- added debug mode for the whole install
-
- * my_gtk.pm: removed print
- new pack_start functions, powerpack sub added (code from adrien)
- incorporated adrien's code to generalize pack functions
- minor bug fixes
-
- * install_steps.pm, network/netconnect.pm: corrected network connection
- during install
-
- * install2: added debug mode for the whole install
-
-2002/01/07 François Pons <fpons@mandrakesoft.com>
-
- * steps.pm: changed installUpdates after summary (to get corrected
- timezone).
-
- * install_any.pm: separated setDefaultPackages from setPackages because it
- is used by allowing
- only base system to be installed (allow remade a better package
- selection).
-
- * crypto.pm: added bestMirror method to retrieve a good mirror (according
- to timezone) and
- add salt with random number to avoid using always the same.
-
- * install2.pm: added option to only upgrade packages.
-
- * install_steps_interactive.pm: added minimal type of install support.
-
- * share/list: fixed to match newer menu package.
-
- * Makefile: fixed overwriting of install2 filtering, keep diagnostic and
- strict for debug mode.
-
-2002/01/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: also log server name for HTTP install
-
-2002/01/04 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, install_steps.pm, network/tools.pm, my_gtk.pm,
- network/netconnect.pm: corrected minor bugs in network (among others bug
- "modifying read only values")
- recode upNetwork and downNetwork (it might work, at least if you are
- lucky);
-
-2002/01/04 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: corrected minor bugs in network (among others bug "modifying
- read only values")
- recode upNetwork and downNetwork (it might work, at least if you are
- lucky);
- corrected font display : no useless font->height, but ascent + descent
- updated
-
- * network/isdn_consts.pm: changed asus isdn hisax identify
-
- * network/adsl.pm, install_steps.pm, network/tools.pm,
- network/netconnect.pm: corrected minor bugs in network (among others bug
- "modifying read only values")
- recode upNetwork and downNetwork (it might work, at least if you are
- lucky);
-
-2002/01/04 François Pons <fpons@mandrakesoft.com>
-
- * http.pm, install2.pm, steps.pm, install_any.pm: added update
- installation support to install (big modifs need testing).
-
- * pkgs.pm: allow to use same identifier for security medium (1u).
- re-install urpmi.
- allow some error to be catched.
- added update installation support to install (big modifs need testing).
-
- * crypto.pm: removed test code.
- allow to use same identifier for security medium (1u).
- re-install urpmi.
- allow some error to be catched.
- added update installation support to install (big modifs need testing).
-
- * install_steps_interactive.pm: removed obsoleted comment.
- allow to use same identifier for security medium (1u).
- re-install urpmi.
- allow some error to be catched.
- added update installation support to install (big modifs need testing).
-
- * install_steps_gtk.pm: fixed empty flat package selection when giving a
- limit to medium.
- added update installation support to install (big modifs need testing).
-
- * install_steps.pm: allow to use same identifier for security medium (1u).
- re-install urpmi.
- allow some error to be catched.
- fix for auto updates.
- added update installation support to install (big modifs need testing).
-
-2002/01/04 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm: enable easy patch-adding of pcitable and usbtable
- entries
-
-2002/01/03 dam's <damien@mandrakesoft.com>
-
- * standalone/drakbackup: user can be equal to 500
-
-2002/01/03 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: updated code to create synthesis file (including
- provides on files).
-
-2002/01/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ar.po: updated Arabic file
-
-2002/01/03 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm, Xconfig.pm: save the output of ddcxinfos before
- modprobe'ing i810fb, and use that output for Xconfig (when i810fb is
- modprobe'd, ddc probe doesn't work anymore)
-
- * install_steps_interactive.pm, install_steps_gtk.pm: fix english messages
-
- * share/rpmsrate: as asked by Vincent Danen, lower uucp and raise sudo
-
- * pkgs.pm: prefer gcc-cpp
-
- * interactive_gtk.pm, interactive.pm: toggle Advanced/Basic button
-
- * any.pm: fix english messages
- save the output of ddcxinfos before modprobe'ing i810fb, and use that
- output for Xconfig (when i810fb is modprobe'd, ddc probe doesn't work
- anymore)
-
-2002/01/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: changed @euro locales to plain names; now old currencies ones
- are obsolete
-
-2001/12/31 sdupont
-
- * standalone/drakfont: new fixed size and add a head pixmap (to update).
-
- * standalone/drakbackup: lots of update ...
- - cron work.
- - backup incremental & normal work.
- - corrupted backup data files supported.
- - error messages updated.
- - aff list of backup data files pbs.
- - test all backup files before to restore it.
-
-2001/12/30 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
- root reserved part is 0% (and not 5%)
-
-2001/12/30 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
- root reserved part is 0% (and not 5%)
-
-2001/12/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectMouse): when selecting a usb mouse,
- call setup_thiskind with
- at_least_one=1 (so that pci_class probe is used and so unknown
- serial_usb
- recognised (cf ldetect))
-
- * modules.pm (load_thiskind): allow $probe_type to be given, allowing
- forced pci probe (unsafe)
-
- * any.pm (setup_thiskind_backend): when at_least_one==1, try load_thiskind
- forcing
- pci_class probe when no modules is found.
-
-2001/12/28 sdupont
-
- * standalone/drakbackup: update select data on backup cd
-
-2001/12/27 sdupont
-
- * standalone/drakbackup: fix of user selection during restore step.
- remove return_file_date.
- change algo for incremental backup.
-
-2001/12/26 sdupont
-
- * standalone/drakbackup: some gi corrections & update.
- incremental restore.
-
-2001/12/22 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: s/use pkgs/require pkgs/ since pkgs::versionCompare is
- only used during install
-
- * my_gtk.pm: export gtkcolor (used in install_steps_gtk)
- make perl_checker happy
-
-2001/12/22 sdupont
-
- * pixmaps/backup_bot.png, pixmaps/cdrom.png, pixmaps/backup_time.png,
- pixmaps/backup_bot2.png, pixmaps/backup_left.png, pixmaps/net.png,
- pixmaps/backup_hd.png, pixmaps/backup_title.png,
- pixmaps/backup_left2.png, pixmaps/filedialog.png, pixmaps/hd.png,
- pixmaps/backup_options.png, pixmaps/backup_net.png: remove old
- drakbackup pixmaps files.
-
- * pixmaps/ic82-back-up-16.png, pixmaps/ic82-discdurwhat-40.png,
- pixmaps/ic82-tape-40.png, pixmaps/ic82-moreoption-40.png,
- pixmaps/ic82-where-40.png, pixmaps/ic82-system-40.png,
- pixmaps/ic82-others-40.png, pixmaps/ic82-systemeplus-40.png,
- pixmaps/ic82-network-40.png, pixmaps/ic82-CD-40.png,
- pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
- pixmaps/ic82-users-40.png, pixmaps/ic82-dossier-32.png,
- pixmaps/ic82-back-up-48.png: drakbackup designer icons.
-
- * standalone/drakbackup: add pixmaps on backup step.
- new designer pixmaps on drakbackup.
-
-2001/12/21 sdupont
-
- * standalone/drakbackup: some update in file name parsing...
- etc ...
-
- * pixmaps/BDO-drakebackup1.png: drakbackup
-
-2001/12/20 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: API changed, so call changed
-
- * share/logo-mandrake.png: new ayo logo
-
-2001/12/20 sdupont
-
- * standalone/drakbackup: update the todo header
- the REQUIRE header
- & code cleaning
- - tar -cvf tarfilename --after-date="sept 1, 2000" /home
- l.380 incremental: date -> if already exist do find -m ... | tar ...
- non incremental: date + delete old before the backup
- - correct detection of backups during restore.
- - gi for other media during restore. hd-> ok
- - backend for build backup update and support
- incremental backups.
- - real incremental backup
- update resore & help.
-
-2001/12/19 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: update graphical backend
-
-2001/12/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: add dl2k.o (nic module) per request of nplanel
-
-2001/12/19 sdupont
-
- * standalone/drakbackup:
- - gi for other media during restore. hd-> ok
- - backend for build backup update and support
- incremental backups.
- - real incremental backup
- add other media source during restore.
- - update help & license.
- - code cleaning.
- - ask during whqt sys step if user want to backup critical
- files, like /etc/passwd /etc/group /etc/fstab
- - use preserve permissions during tar
- - begin of total backup step.( all partitions wanted, windows
- partitions for example!)
- - remove replace mode (backup_*_version is enought)
-
-2001/12/18 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: fixed dam's sucking (syntax error only, code is
- untested).
-
-2001/12/18 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix typos
-
-2001/12/18 sdupont
-
- * standalone/drakfont: include new pixmap on main menu.
-
- * standalone/drakbackup: sort lists in all lists selection.
- correct use of incremental backup
- parse of restore & system state.
- fix restore user selection problems
- fix build backup data selection problems
- ect ...
- drakbackup -> drakxtools.rpm
-
- * pixmaps/ic-drakfont-48.png: drakfont pixmap...
-
-2001/12/18 yduret
-
- * standalone/logdrake: fix console mode : exit now
-
-2001/12/18 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: fix typos
-
-2001/12/17 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: power graphical backend update : text is now
- centered
-
- * my_gtk.pm: power graphical backend update : text is now centered
- updated new graphical backend
-
-2001/12/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_gtk.pm, standalone/drakgw: drakgw for gold
-
- * tools/pcmcia_config.patch: remove permanently (using
- patch_pcmcia_config.pl now)
-
-2001/12/17 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
- tmpfs
-
-2001/12/17 sdupont
-
- * standalone/drakbackup:
- ________________________________________________________________
- DONE:
- incremental backups have depends whith replace options.
- gtklist not maximized.
- restore mode.
- view date during restore
- view size of file, date & hours during backup on CD
- ________________________________________________________________
-
-2001/12/17 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
- tmpfs
-
-2001/12/14 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new picture for 8.2.
-
-2001/12/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: change again way of selection
- PCI entries :
- what's in mar files --> what's given by modules (e.g. just
- as update_kernel does)
-
-2001/12/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install2.pm: use "askdisplay" to ask a question at begining of install
- for what
- display you want to use during install
-
- * Makefile, tools/patch_pcmcia_config.pl: externalize patch_pcmcia_config
- (from make_boot_img)
- because we need it in perl-install/Makefile also
-
- * mdk-stage1/rescue-gui.c, rescue/make_rescue_img, rescue/rescue-doc,
- rescue/Makefile: have a bunch of Rescue documentation directly
- available from the Rescue-menu following suggestions
- by Denis among others
-
-2001/12/12 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: enable easy screenshot'ing
- - ensure /usr is formatted if / is
- - remove /var/lib/rpm if /var is kept
-
- * common.pm, docs/README: enable easy screenshot'ing
-
-2001/12/12 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * rescue/make_rescue_img: larger rescue image on PPC to accomodate huge
- xfs module
-
- * bootloader.pm: mods to address new yaboot's lack of symlink ability, xfs
- initrd load
-
-2001/12/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/stage1.h: support
- "filename" in DHCP answers and give this
- to stage2 as --kickstart parameter
-
-2001/12/11 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm, keyboard.pm: finish journalled fs usage - PPC,
- add "\n" keyboard.pm, new modelines
-
-2001/12/10 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: added network package not present in @needToCopy
- (package that may be installed
- by DrakX to avoid re-asking of CD1).
-
- * bootloader.pm: added safe guard against looping symlink.
-
-2001/12/10 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, any.pm, bootloader.pm:
- - fix bootloader::add_append
- - add handling of serial console
-
- * http.pm, install_any.pm: enable http:// in auto_install file location
-
-2001/12/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
- * install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
- * bootloader.pm (suggest, add_kernel): much cleanup
-
- * diskdrake.pm: fix call to fileshare_config
-
-2001/12/05 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: updateed logo
-
-2001/12/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile, mdk-stage1/pcmcia_/cardmgr.c:
- - fix problems with sockets not initialized (disabling
- hotplug support -> cardmgr handles sockets)
- - fix problems with PCMCIA net adapters now using PCI
- modules, by adding PCMCIA base code in `network.img'
-
-2001/12/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
- * pkgs.pm (selectPackage): hard coded preference to simple kernel
-
- * install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
- * diskdrake.pm: fix call to fileshare_config
-
- * steps.pm: createBootdisk now after setupBootloader (together with dumber
- install_any::kernelVersion)
-
- * network/tools.pm: fix missing ";" (thanks to Robert Fox)
-
- * bootloader.pm (suggest, add_kernel): much cleanup
-
- * fs.pm: fix type "smb" vs "smbfs", and handle options in fs::mount
-
-2001/12/05 sdupont
-
- * pixmaps/backup_bot2.png: update pixmaps
-
- * standalone/drakbackup: todo : scp ssl sftp rsync connections perl || c ?
- done : bzip2 backup
- merge
-
-2001/12/04 dam's <damien@mandrakesoft.com>
-
- * standalone/drakbackup: corrected pixmap path
- corrected pixmap path
-
- * Makefile.config: added drakbackup drakfont
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * any.pm, mdk-stage1/log.c, docs/README: save stage1.log and have it in
- report.bug
-
- * mdk-stage1/automatic.c, mdk-stage1/doc/TECH-INFOS: support shorter
- versions of automatic keywords to beat problems with very long kernel
- commandlines
-
- * install_interactive.pm: try to not get something poorly wrapped
-
- * c/stuff.xs.pm: floppy_info: add missing close(fd)
-
-2001/12/04 Pixel <pixel@mandrakesoft.com>
-
- * network/smb.pm: cleaner smbclient call
-
- * install_steps.pm: re-enable supermount by default
-
-2001/12/04 sdupont
-
- * pixmaps/backup_bot.png, pixmaps/backup_left.png: correct colors
- problems.
-
- * standalone/drakbackup: bzip2 ok for compression to see: decomp without
- pbs whith tar.gz and tar.bz2
- todo: update mode -> decomp + update tar file + recomp
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: re-enable supermount by default
-
- * network/smb.pm: cleaner smbclient call
-
-2001/12/04 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fix bad parsing of package to copy (when one doen't
- exist anymore) in
- postinstall_rpms directory.
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: re-enable supermount by default
-
- * network/smb.pm: cleaner smbclient call
-
-2001/12/04 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: additional package for wlan
-
- * network/tools.pm: corrected pipe reading
-
-2001/12/04 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: make sure lilo is installed on automatic mode.
-
- * install_any.pm: fix bad parsing of package to copy (when one doen't
- exist anymore) in
- postinstall_rpms directory.
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_interactive.pm: try to not get something poorly wrapped
-
- * mdk-stage1/modules.c: fpons is a sucking chief
-
- * modules.pm, mdk-stage1/usb-resource/update-usb-ids.pl,
- mdk-stage1/Makefile, mdk-stage1/.cvsignore, mdk-stage1/probing.c:
- support install from USB CDROMS (using usb-storage)
-
-2001/12/04 Pixel <pixel@mandrakesoft.com>
-
- * network/smb.pm: cleaner smbclient call
-
-2001/12/04 sdupont
-
- * standalone/drakbackup: last update... for cooker
- drakbackup deamon -> ok
- drakbackup cvs -> to do (only for /etc)
- drakbackup wizard -> only last step
- drakbackup cd -> device detection and ask for only iso file.
- drakbackup net -> do rsync
- drakbackup begin -> todo : update initial message
- update help and about.
-
-2001/12/04 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: additional package for wlan
-
-2001/12/04 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: make sure lilo is installed on automatic mode.
-
- * mdk-stage1/modules.c: fixed gégé sucking.
-
-2001/12/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: fpons is a sucking chief
-
-2001/12/04 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/modules.c: fixed gégé sucking.
-
-2001/12/04 sdupont
-
- * standalone/drakbackup: update...
-
-2001/12/03 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: removed use gtk
-
-2001/12/03 François Pons <fpons@mandrakesoft.com>
-
- * tools/updatehdlist: initial revision, simple way to update a local set
- of medium from /RPMS.
-
-2001/12/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: typo of last commit (unused variable -> could not
- compile)
-
-2001/12/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/hu.po, share/po/es.po: updated Hungarian
- and Spanish files
-
-2001/12/03 sdupont
-
- * standalone/drakbackup: update
- option step.
- write other file content.
- restore gi.
-
-2001/12/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2001/12/01 sdupont
-
- * standalone/drakbackup: do not include browser cache.
-
-2001/11/30 François Pons <fpons@mandrakesoft.com>
-
- * docs/spec-DrakX-8.0.html: added spec (forgotten for quite a long)
-
-2001/11/30 gbeauchesne
-
- * partition_table_gpt.pm:
- - cleanups from mainline
-
- * modules.pm: Suckiness fixes from mainline (gc):
- - Do parse /proc/modules in reverse order
- - Fix "convert old scsi_hostadapter's to new probeall" scheme
-
- * bootloader.pm:
- - Don't forget to link the initrd to the real image in /boot/efi/ too
- - Remove DEBUG printouts in install_efi_boot_menu
-
-2001/11/30 Pixel <pixel@mandrakesoft.com>
-
- * network/smb.pm, any.pm, Makefile.drakxtools, standalone/diskdrake,
- Makefile.config, diskdrake.pm: fileshare should be ok, handle diskdrake
- --fileshare, fix smb import
-
-2001/11/30 sdupont
-
- * pixmaps/backup_left2.png: drakbackup pixmap
-
- * standalone/drakbackup: backend mode-> ok for hd
- we can use drakbackup !.
- todo :
- backend mode:
- - net
- - cd
-
- advanced mode:
- - device detection (cd writer)
-
- wizard:
- - end of this step.
-
- gi:
- - option step in adnanced step to choice
- for example tar.gz or tar.gz2 ...
- update
- restore step 1 & 2.
- adv step -> ok
- todo: wizard ...
- little update!
-
- variables correction in advanced step.
- wizard user question, sys question & daemon
-
-2001/11/29 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * share/rpmsrate: Remove linux_logo
-
-2001/11/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: add wvlan_cs
-
- * mdk-stage1/modules.c: remove unneeded handling of "alias
- scsi_hostadapter"
-
- * mdk-stage1/stage1.c: add another expert_third_party_modules at the end
- of enabling-pcmcia-stuff
-
-2001/11/29 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: remove the export tree for nfs/smb feature, remove some
- test code
- tentative version with export/import nfs/smb tree (committed to have it
- in CVS as the export tree is already deprecated)
-
- * standalone/fileshareset:
- - allow root to export everything
- - remove empty mntpoint (from smb)
-
-2001/11/29 sdupont
-
- * standalone/drakbackup: just update....
- advanced: users correction during save.
- user pass, user login, path to save local or on host
- combo for network protocol.
- wizrad: already to do!
- CDRW burn: todo: devices detection (see to_fond_cd).
- code cleaning.
-
- * standalone/drakfont: cleanning code.
-
-2001/11/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm:
- - fix pixel sucks of not parsing /proc/modules in
- reverse order
- - be more in sync regarding names of pcmcia drivers
-
- * any.pm: add modules.conf in report.bug
-
-2001/11/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_CN.po, share/po/zh_TW.po: updated Chinese file
-
-2001/11/28 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (read_conf): fix "convert old scsi_hostadapter's to new
- probeall"
-
- * standalone/drakbackup: make check_what_user works
-
- * standalone/fileshareset: better description
- gr_mem in getgrent is space separated, not comma separated
- add samba handling. Should be finished now :)
-
-2001/11/28 sdupont
-
- * pixmaps/backup_bot2.png, pixmaps/quit.png: drakbackup pixmaps.
-
- * standalone/drakbackup: no important changement!
- clean code
- update!
- for gc & Warly: some fixes, correction of advanced, wizard and after
- advanced steps.
- the user have a better gestion during advanced step, the protocols ftp,
- sftp, scp, rsync
- are now include in advanced step..... etc ;-)
- todo: when checkbuttonbox are clicked for user choice set it to 0 or 1
- juste after.
- clean code.
- new after advanced step, correction of checkbuttons problems & new
- pixmaps.
-
-2001/11/27 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake.png: updated, cooker style
-
-2001/11/27 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: avoid problem of array reference badly evaluated.
-
-2001/11/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/mailchangelog.pl: beurk
- changelog is at linux-mandrake not mandrakesoft
-
- * install_steps.pm: i810 -> no FB at boot
-
-2001/11/27 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_gpt.pm (generate_guid): cleanup
-
- * any.pm (setupBootloader): s/last/return/
-
-2001/11/27 sdupont
-
- * standalone/drakbackup: advanced step...
- update.
- advanced mode ... and ...
- read and use user list correctly, advanced step user list.
-
- * pixmaps/hd.png, pixmaps/net.png, pixmaps/cdrom.png: pixmaps for
- drakbackup.
-
-2001/11/26 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * tools/i386/netboot/stage2.rtl8139: add rtl8139 netboot file that works
-
- * tools/i386/netboot/stage1.rtl8139: add rtl8139 netboot file that works
- stage1/stage2 of rtl8139 didn't work
-
-2001/11/26 dam's <damien@mandrakesoft.com>
-
- * common.pm, my_gtk.pm: new features for new mcc
-
-2001/11/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: getAndSaveAutoInstallFloppy: don't die when output'ing
- of
- auto_inst.cfg is not possible
-
-2001/11/26 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: add $o->{excludedocs} feature
-
- * Makefile.drakxtools: remove unneeded files (*.bs and .exists)
-
- * interactive_gtk.pm: cleanup
-
-2001/11/26 sdupont
-
- * standalone/drakbackup: new gi, advanced step.
- update.
- gawk cmds.
- better use for read and save conf. file now on
- /etc/draxtools/drakbackup/drakbackup.cfg
-
- * pixmaps/backup_hd.png, pixmaps/backup_options.png,
- pixmaps/backup_net.png, pixmaps/backup_time.png: png files for
- DrakBackup.
-
-2001/11/25 Pixel <pixel@mandrakesoft.com>
-
- * standalone/fileshareset: first version. for the moment, only nfs.
-
-2001/11/25 sdupont
-
- * standalone/drakbackup: update of read_conf_file and default mode.
-
-2001/11/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po, share/po/es.po: updated Spanish and Danish files
-
-2001/11/24 sdupont
-
- * standalone/drakfont: about...
-
- * standalone/drakbackup: update
- update gi ,build of system, user, other, options interfaces.
- advanced step.
-
-2001/11/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: package for pcmcia is now called "pcmcia-cs"
-
- * any.pm, detect_devices.pm: pcmcia: /var/run/stab is nor
- /var/lib/pcmcia/stab
- yes it probably doesn't bring anything valuable but it's
- how life is :-)
-
-2001/11/23 sdupont
-
- * standalone/drakbackup: radio buttons & information message.
- change gi interface, include help, about and pixmaps (backup_*.png on
- standalone/pixmaps directory)
-
-2001/11/22 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: removed loading of agpgart module for i810 card.
-
-2001/11/22 sdupont
-
- * standalone/drakfont: about button & GPL license.
-
- * standalone/drakbackup: update gi.
- TODO: separate all the boxes.
- include wizard and advanced in pixmaps.
- update
- notebook gi.
-
-2001/11/21 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
- mdk-stage1/init-data/msgboot-blank.img.bz2,
- mdk-stage1/init-data/msgboot.img.bz2: fixed typo in help.msg
-
- * Xconfigurator.pm: hack for SiS 640 for laptop.
-
- * install_any.pm: fixed install_urpmi to build a correct urpmi db.
-
-2001/11/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: i810fb
- migrate pcmcia in drakx to use in-kernel version (only
- for 2.4, though --> pcmcia in 2.2 no longer supported)
-
- * install_steps_interactive.pm, Makefile, c/Makefile.PL: migrate pcmcia in
- drakx to use in-kernel version (only
- for 2.4, though --> pcmcia in 2.2 no longer supported)
-
- * install2.pm: i810fb
-
- * mdk-stage1/stage1.c, mdk-stage1/pcmcia_/lex_config.c,
- mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/pcmcia_/yacc_config.c,
- mdk-stage1/pcmcia_/Makefile, mdk-stage1/Makefile,
- mdk-stage1/pcmcia_/pcmcia.h, mdk-stage1/pcmcia_/ds.h,
- mdk-stage1/pcmcia_/probe.c: migrate to pcmcia support from kernel,
- patching untouched imported
- sources from pcmcia-cs-3.1.29, to ease further updates of vendor
- code (start from a clean pcmcia_ subdir)
-
-2001/11/21 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm (suggestions_mntpoint): if there's no server suggestion, use
- the simple
- one, so that 'simple' is the only one required when someone modifies
- %fsedit::suggestions
-
-2001/11/20 gbeauchesne
-
- * partition_table.pm:
- - Add isEfi() to isOtherAvailableFS() test so that install doesn't
- suggest
- to format /boot/efi by default. That way, we could preserve (shame on
- us)
- EFI boot partition generated by Windows XP 64 bits...
-
-2001/11/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pcmcia_/lex_config.c, mdk-stage1/pcmcia_/cardmgr.c,
- mdk-stage1/pcmcia_/bulkmem.h, mdk-stage1/pcmcia_/cardmgr.h,
- mdk-stage1/pcmcia_/vg468.h, mdk-stage1/pcmcia_/driver_ops.h,
- mdk-stage1/pcmcia_/i82365.h, mdk-stage1/pcmcia_/cirrus.h,
- mdk-stage1/pcmcia_/version.h, mdk-stage1/pcmcia_/cistpl.h,
- mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/cs_types.h,
- mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/yacc_config.h,
- mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/tcic.h,
- mdk-stage1/pcmcia_/probe.c: Initial revision
- version 3.1.29
-
-2001/11/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_stdio.pm: for po i can't use $ for string interpolation
-
-2001/11/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * services.pm, standalone/scannerdrake: Corrected English errors
-
- * share/po/hu.po, share/po/cs.po: updated pot file
- updated Czech and Hungarian files
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/af.po:
- updated pot file
-
-2001/11/19 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (setupBootloader): fix typo
- (setupBootloader): fix typo
-
-2001/11/19 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Last correction was wrong, reverted it.
-
-2001/11/19 yduret
-
- * standalone/scannerdrake: added dynamic support
-
-2001/11/16 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: syntax cleanup
- - a little cleanup
- - in case there is both scsi and ide hard drives, go to expert
- questions
- directly (it would need a semi_auto asking on which drive the bios
- boots...)
-
-2001/11/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help file
-
- * keyboard.pm: Added Swedish dvorak keyboard
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/help_xml2pm.pl, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/11/12 sdupont
-
- * standalone/drakbackup: new backup tool.
- backend_mode with options.
- begin interactive mode.
-
-2001/10/29 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: code correction
-
-2001/10/29 gbeauchesne
-
- * rescue/list.ia64:
- - Add xfs_repair and efibootmgr
-
-2001/10/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * fs.pm, loopback.pm, fsedit.pm, bootloader.pm: revert back to /initrd
-
- * modules.pm: here too
- CDCEther looks good, I add it
-
-2001/10/29 Pixel <pixel@mandrakesoft.com>
-
- * tools/pcmcia_config.patch: adapt for new pcmcia-cs
-
-2001/10/29 sdupont
-
- * standalone/drakfont: Copyright (C)
- correction of warning & code cleaning.
- the end.... i think...
- updated
- uninstall interface & progress bar
- uninstall interface : lists & progress bar
- new progress bar update
- todo: second list
-
-2001/10/28 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: cleaning
-
-2001/10/27 daouda
-
- * devices.pm, my_gtk.pm, Xconfig.pm: return value at end of module
-
- * share/rpmsrate:
- - increase icewm weight.
-
-2001/10/26 dam's <damien@mandrakesoft.com>
-
- * standalone/drakautoinst, standalone/drakfont: progress bar hack
-
-2001/10/26 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/pcmcia_config.patch: was duplicated in gi/tools
-
- * partition_table_gpt.pm, partition_table_raw.pm: no adjust start and end
- on GPT
-
-2001/10/26 sdupont
-
- * standalone/drakfont: updated.
- search correct progress bar mode implementation.
- updated
- fix some bugs & interface progress implementation.
- TODO:
- progress before backend.
- search if directory already exist before custom install.
-
-2001/10/25 dam's <damien@mandrakesoft.com>
-
- * standalone/drakautoinst: simple variables handled, code compression.
- The new and shiny drakautoinst is coming. P|-|34R
- The new drakautoinst is coming. P|-|34R
-
- * pixmaps/mdk_logo.png: additional logo
-
- * standalone/drakfont: code correction
-
-2001/10/25 sdupont
-
- * standalone/drakfont: merge differents versions.
- file sector, list of fonts for advanced install...
- applications choice, license widget, help widget.
-
-2001/10/24 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: updated
- updated
- updated, lot of bugs.
- updated
-
- * my_gtk.pm: added set_editable
-
-2001/10/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/lsparts, mdk-stage1/rescue-gui.c, mdk-stage1/frontend.h,
- mdk-stage1/.cvsignore, rescue/install_bootloader,
- rescue/tree/etc/rc.sysinit, rescue/Makefile,
- mdk-stage1/stdio-frontend.c, rescue/guessmounts, mdk-stage1/Makefile,
- rescue/tree/etc/issue, rescue/make_rescue_img,
- mdk-stage1/newt-frontend.c:
- - add a GUI to the rescue
- - provide guessmounts with better efficiency and output, go to
- console, and reboot
- - provide install_bootloader which runs lilo from /mnt if it seems
- safe
- - add lsparts to rescue, which prints partitions with detected types
-
-2001/10/24 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm: replace /initrd with /lib/initrd
- (hds): in case of GPT, allow ext2 to be replaced by any kind of
- partitions (esp. EFI)
-
- * partition_table.pm, partition_table_gpt.pm, partition_table_bsd.pm,
- partition_table_raw.pm: add methods first_usable_sector and
- last_usable_sector
-
- * fs.pm, loopback.pm, bootloader.pm: replace /initrd with /lib/initrd
-
-2001/10/24 sdupont
-
- * standalone/drakfont: scroll
- `
- import_status & progress.
- gi update.
-
-2001/10/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * services.pm: tagged as translatable some left out strigns
-
-2001/10/23 sdupont
-
- * standalone/drakfont: gi update
- doc and progress bar.
- gui: install from directory
- gui supported.
-
-2001/10/23 yduret
-
- * share/po/fr.po: fixed fohtes grammar
-
-2001/10/22 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm: speedtouch config : added usa vpi vci
-
-2001/10/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: oops forgot to umount after "updatemodules"...
-
-2001/10/22 Pixel <pixel@mandrakesoft.com>
-
- * rescue/tree/etc/profile: fix PATH (have /mnt/bin /mnt/usr/bin ...)
-
-2001/10/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed connection device setting for "oki4w" driver.
-
-2001/10/19 gbeauchesne
-
- * partition_table_gpt.pm:
- - Use /dev/random through devices::make() instead of /dev/urandom
- - Localize file descriptor
- - Capitalize error message if no /dev/random found
-
- * partition_table.pm:
- - s/Win98 FAT32/FAT32/
- - s/Partition that contains an EFI file system/EFI (FAT-12/16/32)/
- - Add "FAT32" to @important_types for IA-64 & /boot/efi
-
-2001/10/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stdio-frontend.c: small fix
-
-2001/10/19 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm: OOize can_raw_add
-
- * partition_table.pm: handle empty $hd->{primary}{raw} (happens with no
- partitions on ia64)
- - raw_add, can_raw_add moved to partition_table_raw
- - using raw_removed
-
- * partition_table_dos.pm: better handling of CHS overflow (mainly for non
- cylinder-boundary aligned part (like ia64))
-
- * partition_table_raw.pm (adjustEnd): in case the end is totalsectors,
- don't adjust since totalsectors / cylinder_size may not be an integer
- (zero_MBR): defaults to GPT on ia64
- (raw_add, can_raw_add, raw_removed): created, can now be overloaded in
- partition_table_*.pm's
- (get_geometry): keep the total_sectors as given by c::total_sectors,
- don't try to recompute it based on nb_cylinders (for hds where
- total_sectors is not a multiple of nb_cylinders)
-
- * common.pm: cleanup
-
- * partition_table_gpt.pm: fix ending is last sector, not next one
- add TODO for partition entry guid
- - writing partition table now works
- - creating a new partition table now works (except GUIDs generation)
-
-2001/10/18 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm: corrected GET_FL and co
-
-2001/10/18 François Pons <fpons@mandrakesoft.com>
-
- * standalone/XFdrake: fix ia64 glitches with /usr/X11R6/lib/X11/Cards (now
- use rgb.txt instead).
-
-2001/10/18 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_gpt.pm:
- - add checksum verif on partition entries
- - detect the type of partition since the partition table types seem
- quite poor
- read part of GPT partition table working
-
- * fsedit.pm:
- - add checksum verif on partition entries
- - detect the type of partition since the partition table types seem
- quite poor
-
- * partition_table.pm: read part of GPT partition table working
- shorter GPT name
-
- * detect_devices.pm: safer modprobe ide-floppy
-
-2001/10/18 sdupont
-
- * standalone/drakfont: change Fontmap ghostscript file.
- drakfont support now .gsf fonts
- end of backend......
- update
-
-2001/10/17 dam's <damien@mandrakesoft.com>
-
- * standalone/draksec: typo
-
-2001/10/17 sdupont
-
- * standalone/drakfont: implementation of type1 fonts removing.
- ghostscript, xfs and staroffice tested and supported.
-
-2001/10/16 dam's <damien@mandrakesoft.com>
-
- * standalone/draksec: correct bad level display
-
- * standalone/interactive_http/Makefile: makes rpmlint happy
-
-2001/10/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: print checks
-
- * rescue/tree/etc/rc.sysinit: better phrasing
-
-2001/10/16 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * rescue/devices.pl, mdk-stage1/pci-resource/update-pci-ids.pl,
- rescue/list.ppc: typo in update kernel by /me
- fine-tune sanity_check for ppc
- move /dev/nvram from list.ppc to devices.pl
-
-2001/10/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2001/10/15 yduret
-
- * scanner.pm: wonderful perl forgotten
-
-2001/10/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: have "other.img" drivers also
- supported
-
-2001/10/12 sdupont
-
- * standalone/drakfont: support all installations, and support xfs,
- ghostcript, staroffice.
- todo aplli: openoffice, gimp, abiword, netscape & other browsers...
- todo or to see: --strong ttmkfdir -c ???
- emd of backend..
-
-2001/10/11 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: multiple card configuration bug corrected.
- allelluia.
-
- * network/tools.pm: aded use c
-
- * standalone/drakfont: code review
-
-2001/10/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive_stdio.pm, install_steps_stdio.pm: stdio mode works again
-
-2001/10/11 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: ensure postInstallNonRooted is done *before* ejecting cdrom
-
-2001/10/11 sdupont
-
- * docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
- docs/drakfont/drakfont.dvi: clean directory..
-
- * docs/drakfont/drakfont.aux, docs/drakfont/dia_srcs/drakfont.dia,
- docs/drakfont/dia_srcs/drakfont_uninstall.dia,
- docs/drakfont/dia_srcs/drakfont_install.dia: delete all bads files...
-
- * standalone/drakfont: improved....
- improved && implement remove fonts for xfs
- improved
- improved
- optimisation
- correction of option install --replace
- dialog of install options
- correction of install option.
-
- * docs/drakfont/drakfont.jpg, docs/drakfont/drakfont_install.jpg,
- docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: jpg &
- ps with -kb option
- clean...2
-
-2001/10/10 dam's <damien@mandrakesoft.com>
-
- * standalone/drakfont: typo
- improved options handling
-
- * standalone/net_monitor: ergo and features improvments, pipe handling
- correction
-
- * network/tools.pm: updated
-
-2001/10/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/locales-skeleton.tar.bz2: enabled Maltese language
-
-2001/10/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm: normalize the default type entry ("entry")
-
- * interactive_gtk.pm: fix typo (on clicked_may_quit)
-
-2001/10/10 sdupont
-
- * standalone/drakfont: option replace for "install from" &
- windows_import...
- update install dir
- better for --install
- new version of drakfont. in perl langage.
-
- * docs/drakfont/drakfont.jpg, docs/drakfont/drakfont.aux,
- docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
- docs/drakfont/drakfont.tex, docs/drakfont/Makefile,
- docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont.dvi,
- docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: docs
- drakfont
-
-2001/10/10 yduret
-
- * standalone/scannerdrake: first apparition on earth..
-
- * Makefile.config: added scannerdrake
-
-2001/10/09 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm: removed trash
- connection test is now in background, corrects the interface freeze
- problem
-
- * pixmaps/net_u.png: new pixmap for draknet/net_monitor
-
- * standalone/net_monitor, standalone/draknet: connection test is now in
- background, corrects the interface freeze problem
-
-2001/10/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Hungarian file
-
-2001/10/09 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: fix detecting read-only drives (like memory-sticks)
-
- * partition_table.pm: make perl_checker happy
-
- * partition_table_raw.pm: fix detecting read-only drives (like
- memory-sticks)
- make perl_checker happy
-
- * modules.pm, detect_devices.pm, install2.pm: ensure floppies() takes care
- of usb-storage if possible, so that patch on usb floppy works
-
-2001/10/09 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm, keyboard.pm, Xconfigurator.pm: move to Linux
- keycodes on PPC, add additional Apple modelines
-
- * install_steps_interactive.pm: re-enable PPC bootloader setup
-
-2001/10/08 dam's <damien@mandrakesoft.com>
-
- * c/stuff.xs.pm: added FL_GET and FL_SET
-
-2001/10/08 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm: keep isp and gdth module for hd.img (as well as all.rdz) as
- they have been
- removed from the skip list for stage1.
-
- * rescue/tree/etc/oem: added silly modification to avoid using more than 7
- partition for DAC960 (/home
- and /var are not created in the current state).
-
-2001/10/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: ia64
-
- * mdk-stage1/Makefile: 8.1 -> cooker
-
-2001/10/08 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm, partition_table.pm: yet a few other ataraid cases
-
-2001/10/06 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * partition_table_raw.pm, partition_table.pm: updates to accomodate IBM
- PPC systems with DOS partition table
-
-2001/10/05 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added (missing) creation of
- /hd/boot/grub/device.map (needed for
- CompactSmartArray).
-
-2001/10/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: kdegames : 2 -> 4
-
-2001/10/04 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fix (work around) parted problem when it refuse to
- use all disk space for
- partition.
- added another psacct log file in touch.
- fixed typo on scalar reference for psacct bug.
- updated with 8.1 OEM ProSuite.
-
- * tools/oem-prepare: updated with 8.1 OEM ProSuite.
-
-2001/10/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po: updated Hungarian file
-
-2001/10/04 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_dos.pm: is little-endian, so use "V" instead of "I"
-
-2001/10/03 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: synced with oem script.
- removed 3D games not installed by default.
-
- * rescue/tree/etc/oem: fixed typo in produced patch.
- added extension to pro suite CD (added kernel-enterprise to possibly
- installable
- and install kernel22).
- removed 3D games not installed by default.
- added missing xmms-arts.
- allow halting.
-
-2001/10/03 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm: yet another ataraid support patch
-
-2001/10/02 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix previous hack.
- added hack to do "/sbin/depmod -a" for NVIDIA driver.
-
-2001/10/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/probing.c: new pci-ids.h
-
- * mdk-stage1/usb-resource/update-usb-ids.pl: better look
-
- * share/po/fr.po: small fix
-
- * standalone/drakgw: don't call pkgs_install when no package needs to be
- installed
-
-2001/10/02 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm: bloody ataraid detection
-
- * devices.pm: ataraid devices support
-
-2001/10/01 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate: fixed bad format for BOOKS used in DEVELOPMENT.
-
- * rescue/tree/etc/oem: added CHARSET support, removed kernel22 and
- kernel-enterprise from list of
- package installable in oem mode, added possibility to set language on
- /etc/oem
- script invocation.
-
- * install_steps_interactive.pm: avoid chooseCD on oem install.
-
- * install_steps_gtk.pm: avoid asking for changing CD on oem install.
-
- * install_any.pm: use $boot_medium for default medium in oem install,
- avoid using kernel22 or
- kernel-enterprise in oem install (space available is too tight on CD oem
- version).
-
- * tools/oem-prepare: synced with oem script.
-
-2001/10/01 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: reword it so that it reflects
- what's in the marfiles
-
-2001/10/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po: updated Bulgarian file
-
-2001/09/29 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * docs/README: New adress where to find the kernel BOOT
-
-2001/09/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2001/09/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/drvinst: don't install usb keyboard drivers more than once
- try to fix usb keyboards
-
-2001/09/27 kjx
-
- * share/po/zh_CN.po: translating
-
-2001/09/26 gbeauchesne
-
- * install_any.pm:
- - Suggest /boot/efi on IA-64 for the first VFAT partition found,
- instead
- of /mnt/windows
-
- * bootloader.pm:
- - bootloader.pm (suggest): don't search for dos (or windows) boot
- partition
- on IA-64 since ELILO can only boot Linux.
- - bootloader.pm (write_lilo_conf): don't cry if we don't have
- /boot/boot.b
- or boot/message on IA-64.
-
- * rescue/list.ia64:
- - Add file list for "rescue" disk
-
- * share/list.ia64, partition_table.pm:
- - partition_table.pm: Add XFS suggestion for IA-64
- - share/list.ia64: misc updates and additions wrt. XFS, ReiserFS
-
-2001/09/25 baudens
-
- * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/
- Remove totally crazy translation.
- Translators, please use your brain!
-
-2001/09/25 gbeauchesne
-
- * partition_table.pm:
- - Add ReiserFS and Ext3fs entries for IA-64
-
-2001/09/25 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (naughtyServers): cleanup comments
-
-2001/09/25 warly
-
- * share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
- installed for newbie and drakfirsttime does not fail.
- put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
- does not fail.
-
-2001/09/25 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: allow non ejectable medium to allow all
- hdlists on the bootable medium.
- make current boot medium already selected if multiple hdlist are on this
- boot medium.
-
-2001/09/25 warly
-
- * share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
- installed for newbie and drakfirsttime does not fail.
- put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
- does not fail.
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * share/po/fr.po: corrected translation
-
-2001/09/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/mount.c, mdk-stage1/mount.h,
- mdk-stage1/disk.c: hd.img now detects partition types... backport from
- DrakX :-)
-
-2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount_part): fix for iso loopback mounted
-
- * share/po/fr.po: fix
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/isdn.pm: type assignation bug fix
- corrected type assignation
-
- * share/po/fr.po: corrected bad translation
-
- * standalone/draknet: corrected type assignation
-
-2001/09/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * bootloader.pm: fix add_append (there was a ) at the end of the parameter
- value)
-
-2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
- and Turkish files
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount_part): fix for iso loopback mounted
-
- * share/po/fr.po: fix
-
-2001/09/24 warly
-
- * share/rpmsrate: lower arkeia
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * modules.pm: corrected isdn firmware
-
- * network/adsl.pm, network/isdn.pm: type assignation bug fix
- corrected type assignation
-
- * share/po/fr.po: corrected bad translation
-
- * standalone/draknet: corrected type assignation
-
-2001/09/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * bootloader.pm: fix add_append (there was a ) at the end of the parameter
- value)
-
-2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
- and Turkish files
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix small error merging existing fstab
-
- * share/po/fr.po: fix
-
- * diskdrake.pm: do not propose to mount/umount removable medias (disabled
- for now)
-
- * diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24 warly
-
- * share/rpmsrate: lower arkeia
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm, network/ethernet.pm: bug fix
-
- * modules.pm: corrected isdn firmware
-
- * network/isdn.pm, network/adsl.pm: type assignation bug fix
- corrected type assignation
-
- * standalone/draknet: corrected type assignation
-
- * install_any.pm, rescue/tree/etc/oem: added isdn-light to be copied on hd
- during install
-
-2001/09/24 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
- problems reported with it.
-
- * share/rpmsrate: allow rpm build for non expert who choose development.
-
- * install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
- packages).
-
-2001/09/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
- and Turkish files
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix small error merging existing fstab
- add "iocharset=" for cdrom
-
- * install_steps.pm:
- - disable supermount by default
- - cleanup nsswitch.conf wins removing
-
- * diskdrake.pm: do not propose to mount/umount removable medias (disabled
- for now)
-
- * diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24 siegel
-
- * share/po/de.po: new german version
-
-2001/09/24 warly
-
- * share/rpmsrate: lower arkeia
-
-2001/09/24 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm, network/ethernet.pm: bug fix
-
-2001/09/24 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
- problems reported with it.
-
- * share/rpmsrate: allow rpm build for non expert who choose development.
- removed any reference to XFree86-glide-module or Glide_XXX packages.
-
- * pkgs.pm: sort mediums by number, in allMediums() else they will be in
- hash keys orders in
- install_steps_interactive::chooseCD().
-
- * install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
- packages).
-
-2001/09/24 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: add "iocharset=" for cdrom
-
- * install_steps.pm:
- - disable supermount by default
- - cleanup nsswitch.conf wins removing
-
-2001/09/24 François Pons <fpons@mandrakesoft.com>
-
- * share/rpmsrate: removed any reference to XFree86-glide-module or
- Glide_XXX packages.
-
- * pkgs.pm: sort mediums by number, in allMediums() else they will be in
- hash keys orders in
- install_steps_interactive::chooseCD().
-
-2001/09/24 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: File permission settings during install were not done.
- Fixed.
-
-2001/09/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: misc typo correction
-
- * install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
- * share/rpmsrate: simplify (for the moment)
- do not force X flag, have it selected for any "Graphical Environment"
-
- * share/compssUsers, install_any.pm: do not force X flag, have it selected
- for any "Graphical Environment"
-
-2001/09/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po, share/po/hu.po: updated Czech and Hungarian file
-
- * share/po/zh_TW.po: updated Chinese file
-
-2001/09/23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
- * fsedit.pm: add magic SWAPSPACE2
-
- * bootloader.pm: allow bootloader on fat partitions
-
- * share/compssUsers, share/rpmsrate, install_any.pm: do not force X flag,
- have it selected for any "Graphical Environment"
-
-2001/09/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: version is 8.1
-
-2001/09/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bs.po: updated Bosnian file
-
-2001/09/22 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, install2.pm:
- - cleanup noatime option setting
- - cleanup exec option setting (must noexec => 0 instead of exec => 1)
-
- * bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po: updated Bulgarian file
-
-2001/09/22 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added support for automatic /dev/... file permissions
- setting by devfsd.
- Improved matching of auto-detection results with database entries.
- Given hint to the user to select the correct model when matching fails.
-
- * printer.pm: Added support for automatic /dev/... file permissions
- setting by devfsd.
-
-2001/09/21 François Pons <fpons@mandrakesoft.com>
-
- * detect_devices.pm: avoid detecting plip for live upgrade.
-
-2001/09/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: use "us" XKB file for Korean keyboard, otherwise some
- functionality is lost
- small fix for "vn" keyboard (enable toggle key)
-
- * share/po/ko.po: updated Korean file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * printerdrake.pm: small fix
-
-2001/09/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: When one changes the driver of a freshly
- added printer, the cursor was not pointed to the old driver, fixed.
- Fixed paper size not set according to chosen language during
- installation.
-
-2001/09/21 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm: typo
-
-2001/09/21 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: reworked medium management.
- moved com_license to parent package (as code that show the license is
- now
- available even for non gtk install).
-
- * Xconfigurator.pm: S3 ViRGE is a bad card for testing on live upgrade.
-
- * pkgs.pm, install_any.pm: reworked medium management.
-
- * detect_devices.pm: avoid detecting plip for live upgrade.
-
- * install_steps_interactive.pm: avoid keeping testing code.
- reworked medium management.
- added code to support changeable cdrom, set a unique copy of license for
- installing commercial application as package variable (exported).
-
-2001/09/21 gbeauchesne
-
- * share/po/no.po: remove trailing '\n'
-
-2001/09/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hu.po, share/po/no.po: updated pot file
- updated pot file
- updated Norwegian and Hungarian files
- updated pot file
-
- * help.pm: updated help file
-
- * share/po/help_xml2pm.pl: updated pot file
-
- * printerdrake.pm: small fix
- changed text strings to be more translator friendly
- (NEVER EVER cut a phrase)
-
- * share/po/zh_CN.po, share/po/ru.po, share/po/vi.po: updated pot file
- updated pot file
- corrected extra \n
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
- updated pot file
- updated pot file
-
- * keyboard.pm: adapted keyboard priority numbers (it is useless to give a
- multichoice with a
- value higher than 90)
-
- * share/po/zh_TW.po: updated pot file
- updated pot file
-
-2001/09/21 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm: write password in lilo.conf even if it's also done by
- msec, otherwise lilo will fail with restricted only
-
- * install_steps.pm: Ensure $o->{superuser}{name} is temporary
-
- * share/rpmsrate, install_any.pm: add HIGH_SECURITY flag, use it for
- libsafe and kernel22-secure
-
-2001/09/21 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Added a forgotten "_( ... )".
-
-2001/09/21 warly
-
- * share/rpmsrate: add gnomemeeting and openmcu
-
-2001/09/20 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm (partition_with_diskdrake): ensure the $::expert
- flag modifications in
- diskdrake do not escape from diskdrake
-
- * install_steps_interactive.pm (choosePartitionsToFormat): do not propose
- check bad blocks for xfs and jfs
-
-2001/09/20 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: don't reapply the conf, if already applied.
- usefull for dhcp, because the network should be restarted after
- configured
-
- * network/adsl.pm: test if microcode is there
-
- * bootlook.pm: removed blocking die
-
-2001/09/20 fcrozat
-
- * share/rpmsrate: Add gnome-user-docs to GNOME install
- Install Mdk eazel engine for gnome
-
-2001/09/20 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
- this cause
- problem in live_upgrade.
-
- * Xconfigurator.pm: added VideoRam for ET 6x00 card.
-
- * network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: misc
-
-2001/09/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
- * share/po/cs.po: updated Czech file
-
- * share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
- Chinese and Dutch files
-
-2001/09/20 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm (partition_with_diskdrake): ensure the $::expert
- flag modifications in
- diskdrake do not escape from diskdrake
-
- * share/rpmsrate: raise i18n fonts
-
- * fsedit.pm (hds): do a get_major_minor where needed
-
- * lang.pm: replace xcin by chinput as per Alex request
-
- * install_steps_interactive.pm (choosePartitionsToFormat): do not propose
- check bad blocks for xfs and jfs
-
-2001/09/20 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed flow of the program for the "recommended" mode of
- the installation.
-
-2001/09/20 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: don't reapply the conf, if already applied.
- usefull for dhcp, because the network should be restarted after
- configured
-
- * mouse.pm: text positionning
-
- * standalone/net_monitor: less gethostbyname
-
-2001/09/20 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
- this cause
- problem in live_upgrade.
-
- * network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
- Chinese and Dutch files
-
-2001/09/20 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: raise i18n fonts
- s/telnet-server/telnet-server-krb5/
-
- * fsedit.pm (hds): do a get_major_minor where needed
-
- * fs.pm (add2all_hds): allow both "smbfs" and "smb" as fs type
-
- * lang.pm: replace xcin by chinput as per Alex request
-
- * printerdrake.pm: back out the modif from till as asked by till
-
-2001/09/20 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Make it possible to configure more than 1 printer in a
- "recommended" mode installation.
-
-2001/09/19 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
- restart at better place
-
-2001/09/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: updated pot file
- updated help xml
-
- * help.pm: updated help file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/bg.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
- share/po/sv.po, share/po/hu.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
- share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/de.po:
- updated help xml
-
- * share/po/wa.po: updated pot file
- updated pot file
-
-2001/09/19 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
- restart at better place
-
-2001/09/19 fcrozat
-
- * share/rpmsrate: Add mdk-eazel-engine
-
- * share/po/fr.po: Fix french mistakes
-
-2001/09/19 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added code to check if package are really installed.
-
- * Xconfigurator.pm: Rage 128 doesn't like XF3 at all.
- make only bad card Riva128 for testing XF4.
- Riva128 is now a bad card.
-
-2001/09/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: raklet quoting
-
- * share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19 Pixel <pixel@mandrakesoft.com>
-
- * loopback.pm (create): don't use seek to create big files otherwise you
- get hole and
- swapon doesn't like it
-
- * any.pm (ask_users): default icon "man"
-
- * lang.pm: compatibility with older $o->{lang} names (for auto_installs)
-
- * install2.pm: initial support for server install
- compatibility with older $o->{lang} names (for auto_installs)
-
- * install_steps_gtk.pm: initial support for server install
-
- * printerdrake.pm: help perl_checker
-
- * pkgs.pm, share/rpmsrate, install_any.pm:
- - gmc instead of nautilus for non-latin1 installs
- - introduce CHARSET flag and use it
-
-2001/09/19 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Network is now only required (and checked) for remote
- printers.
- Several buglets fixed in remote CUPS server dialog.
-
- * printerdrake.pm: Removed a forgotten debug help line from the code.
- Fixed typo in dialog text of high/paranoid security.
- Network is now only required (and checked) for remote printers.
- Several buglets fixed in remote CUPS server dialog.
-
-2001/09/18 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: don't ask to connect if lan or dhcp
-
-2001/09/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install2.pm: don't create bootdisk by default
-
- * share/po/fr.po: misc
-
-2001/09/18 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
- * install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
- installs
-
-2001/09/18 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, my_gtk.pm: corrected Speedtouch -> speedtouch
-
- * network/netconnect.pm: don't ask to connect if lan or dhcp
-
- * standalone/drakgw: debug
-
-2001/09/18 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added X group with SYSTEM.
- finally work arounded rpm bug by flepied.
-
- * detect_devices.pm: added back full pci probe for stage2 command lspci.
- removed full pci probe for stringlist (used for generating report_bug).
-
- * install_steps_interactive.pm: now finally really fixed printer label in
- summary dialog.
- fixed printer description in summary (again).
- fixed no printer displayed (at least, print Remote CUPS server).
-
- * commands.pm: make lspci a full pci probe instead of safe pci probe.
-
-2001/09/18 gbeauchesne
-
- * Xconfigurator.pm:
- - Force XFree 4 on IA-64. No XFree 3.3.X there...
-
- * tools/ia64/elilo.efi:
- - elilo 3.1
-
-2001/09/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install2.pm: don't create bootdisk by default
-
- * standalone/drakautoinst: have "manual" and "replay" translated
-
- * share/po/fr.po: misc
-
-2001/09/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po, share/po/hu.po: updated Dutch and Hungarian files
-
-2001/09/18 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm, share/gen_locales.sh, share/locales-skeleton.tar.bz2:
- - remove ISO-8859-5, KOI8-R and KOI8-U
- - cleanup packdrake extracting locales
- - cleanup/fixes lang.pm
-
- * install_steps.pm: fix setting kdmrc for latin1
-
- * any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
- * install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
- installs
-
-2001/09/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/list: updated for rpm 4.0.3.
-
- * rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
- "rpm --root" but need more testing.
-
- * standalone/XFdrake: removed comment.
- added support to configure NVIDIA driver if everything is correctly
- installed.
-
-2001/09/17 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, fsedit.pm:
- - '--' to separate options for supermount + small workaround (ro and
- exec before --)
- - fix nfs in manualFstab (for auto_installs, reported by David
- Eastcott)
-
-2001/09/17 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
- in expert install.
-
-2001/09/17 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: no expert mode needed to choose gateway
-
-2001/09/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/list: updated for rpm 4.0.3.
-
- * rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
- "rpm --root" but need more testing.
-
- * printerdrake.pm: add eval around installing lexmark-driver
- (proprietary).
-
- * Xconfigurator.pm: deactivating bad card test (too).
-
- * standalone/XFdrake: removed comment.
- added support to configure NVIDIA driver if everything is correctly
- installed.
-
-2001/09/17 odin
-
- * share/po/fr.po: updated fr.po
-
-2001/09/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: Added choice of "English|Ireland (euro)" so people wanting
- English language but also euro symbol can choose it.
- fixed Belgian keyboard
-
- * share/po/fr.po, share/po/wa.po, share/po/es.po: updated Spanish and
- Wallon files; corrected error syntax in French file
-
- * lang.pm: Added choice of "English|Ireland (euro)" so people wanting
- English language but also euro symbol can choose it.
-
-2001/09/17 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm:
- - '--' to separate options for supermount + small workaround (ro and
- exec before --)
- - fix nfs in manualFstab (for auto_installs, reported by David
- Eastcott)
- (mount): do not hand update /etc/mtab for nfs mounts, already done by
- mount(8)
- (set_default_options): disable iocharset= and codepage= for supermount
-
- * partition_table.pm (adjust_main_extended): do not use linux extended
-
- * detect_devices.pm (pci_probe): log full pci probes
-
- * standalone/drakbug_report: fix
-
- * fsedit.pm:
- - '--' to separate options for supermount + small workaround (ro and
- exec before --)
- - fix nfs in manualFstab (for auto_installs, reported by David
- Eastcott)
-
-2001/09/17 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
- in expert install.
- Do not die when "chkconfig" fails (needed for "security_check").
- Added "-q" option to foomatic-configure (should not get interactive).
- Added handling of high and paranoid security levels.
-
- * printerdrake.pm: /etc/foomatic/defaultspooler was not written in expert
- mode installation.
- Added handling of high and paranoid security levels.
-
-2001/09/17 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: add eval around installing lexmark-driver
- (proprietary).
-
-2001/09/17 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (pci_probe): log full pci probes
-
- * fs.pm (set_default_options): disable iocharset= and codepage= for
- supermount
-
-2001/09/17 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: add eval around installing lexmark-driver
- (proprietary).
-
-2001/09/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/17 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (pci_probe): log full pci probes
-
-2001/09/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-
- * pkgs.pm (read_rpmsrate): fix bug
-
-2001/09/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Fixed bug which prevented from printing the option list
- during install.
- Fixed bug which prevents printerdrake from running without PDQ
- installed.
-
-2001/09/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
- more up to my need ALL flag in compssUsersChoice
- remove auto-install special case (initialisation of compssUsersChoice)
-
- * share/rpmsrate:
- - cleanup packages appearing twice in rpmsrate
- - handle a few case of packages appearing twice
- - special case for packages appearing in INSTALL section (flag
- dropped)
- - new special flag ALL for compssUsersChoice
-
- * pkgs.pm: more up to my need ALL flag in compssUsersChoice
- - cleanup packages appearing twice in rpmsrate
- - handle a few case of packages appearing twice
- - special case for packages appearing in INSTALL section (flag
- dropped)
- - new special flag ALL for compssUsersChoice
-
- * rescue/make_rescue_img: use new mkdir_p, rm_rf and cp_af from
- MDK::Common
-
-2001/09/16 siegel
-
- * share/po/help_xml2pm.pl: added "systemitem"
-
-2001/09/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Fixed bug which prevents printerdrake from running without
- PDQ installed.
-
-2001/09/16 dam's <damien@mandrakesoft.com>
-
- * mouse.pm, my_gtk.pm: bugfix + cosmetic changes
-
-2001/09/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: updated help.pm file
-
- * share/po/hu.po: updated Hungarian file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
- share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/16 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: "please click on ..." for removable, nfs, smb.
-
- * fsedit.pm: enhance lvm handling (mostly standalone)
- - cleanup & enhance raid mdstat reading (now works with or without
- devfs mounted)
- - chunk size is buggy?
-
- * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
- more up to my need ALL flag in compssUsersChoice
- remove auto-install special case (initialisation of compssUsersChoice)
- use new mkdir_p, rm_rf and cp_af from MDK::Common
-
- * share/rpmsrate:
- - cleanup packages appearing twice in rpmsrate
- - handle a few case of packages appearing twice
- - special case for packages appearing in INSTALL section (flag
- dropped)
- - new special flag ALL for compssUsersChoice
-
- * verify_c: add special case for c::to_utf8
-
- * pkgs.pm: more up to my need ALL flag in compssUsersChoice
- - cleanup packages appearing twice in rpmsrate
- - handle a few case of packages appearing twice
- - special case for packages appearing in INSTALL section (flag
- dropped)
- - new special flag ALL for compssUsersChoice
- use new mkdir_p, rm_rf and cp_af from MDK::Common
-
- * services.pm, install2.pm, lang.pm, commands.pm, loopback.pm,
- tinyfirewall.pm, raid.pm, keyboard.pm, printerdrake.pm, fs.pm, mouse.pm,
- network/netconnect.pm, timezone.pm, network/adsl.pm, install_steps.pm,
- any.pm, printer.pm, rescue/make_rescue_img, bootloader.pm: use new
- mkdir_p, rm_rf and cp_af from MDK::Common
-
- * diskdrake_interactive.pm, lvm.pm: enhance lvm handling (mostly
- standalone)
-
- * devices.pm (make): ensure it never returns a non-absolute name
- (it happened with make("foo") when cwd=/dev and /dev/foo existed)
-
-2001/09/16 siegel
-
- * share/po/help_xml2pm.pl: added "systemitem"
- added commet explainig that help.pm is automatically generated.
-
- * .cvsignore: added .*.sw? for vim users
-
-2001/09/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Added possibility to list command line
- options for the printers and to give the users help for printing
- Fixed bug of sometimes appearing the wron dialog after printing test
- pages
-
-2001/09/15 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix options appearing twice in fstab
-
- * install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
- * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
- installs)
-
- * install_steps_auto_install.pm (enteringStep): do not translate in
- ja|ko|zh
-
-2001/09/15 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix options appearing twice in fstab
-
- * install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
- * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
- installs)
-
- * install_steps_auto_install.pm (enteringStep): do not translate in
- ja|ko|zh
-
-2001/09/15 civileme
-
- * help.pm: Added a dialog in English for users selecting a printing system
- since no other
- OS seems to offer such a choice during install.
-
-2001/09/15 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: better connection testing
-
- * network/tools.pm: more timeout
-
- * network/adsl.pm: avoid asking 2 times to restart the ethernet card
-
- * mouse.pm: readded darea realization
-
-2001/09/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/rpmsrate: make gtk-themes installed when Gnome is choosen
-
- * share/po/es.po: updated Spanish file
-
- * share/po/wa.po, share/po/hu.po: updated Hungarian file
-
-2001/09/15 Pixel <pixel@mandrakesoft.com>
-
- * Makefile.config, tools/Makefile: add aewm-drakx
-
- * install_steps_gtk.pm: makes cancel on mouse selection works even better
- - add and use aewm-drakx
- - add some "skip" title on help/logo/steps windows so that aewm-drakx
- know they don't need keyboard focus
- - add some more title to ease debugging (when aewm-drakx is in debug
- mode)
-
- * install_gtk.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/misc.c,
- tools/aewm-drakx/README:
- - add and use aewm-drakx
- - add some "skip" title on help/logo/steps windows so that aewm-drakx
- know they don't need keyboard focus
- - add some more title to ease debugging (when aewm-drakx is in debug
- mode)
-
- * any.pm: i18n kdmrc
- fix user icons choice
- - add and use aewm-drakx
- - add some "skip" title on help/logo/steps windows so that aewm-drakx
- know they don't need keyboard focus
- - add some more title to ease debugging (when aewm-drakx is in debug
- mode)
-
- * install2.pm: don't warn if modules are missing when testing
-
- * bootloader.pm: find error in /tmp/.error only if exception is "xxx
- failed"
- (write_lilo_conf): ensure linear and lba32 are not both set
-
- * share/po/fake_c.pl: fix a tricky hack
-
- * my_gtk.pm: do the set_events before the show otherwise gtk go crazy (no
- more keyboard focus)
-
- * c/stuff.pm: i18n kdmrc
-
- * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
- installs)
-
- * install_steps_interactive.pm: fix typo
- find error in /tmp/.error only if exception is "xxx failed"
- makes cancel on mouse selection works even better
- fix cancel on mouse choice
-
- * install_steps.pm: i18n kdmrc
- enable supermount again
-
- * network/adsl.pm: correct dams typo
-
- * fs.pm (write_fstab): fix supermount moving from options to fstype
-
- * steps.pm: find error in /tmp/.error only if exception is "xxx failed"
-
- * tools/aewm-drakx/aewm.h, tools/aewm-drakx/client.c,
- tools/aewm-drakx/events.c, tools/aewm-drakx/aewm-drakx.c: set_focus on
- new map_request event (fix summary step)
- - add and use aewm-drakx
- - add some "skip" title on help/logo/steps windows so that aewm-drakx
- know they don't need keyboard focus
- - add some more title to ease debugging (when aewm-drakx is in debug
- mode)
-
- * install_steps_auto_install.pm (enteringStep): do not translate in
- ja|ko|zh
-
-2001/09/15 siegel
-
- * share/po/de.po: fixed another typo
- new string
-
- * printerdrake.pm: added missing _()
-
- * standalone/draksec: use " instead of ' to get i18n
-
- * standalone/draknet: fixed missing _()
-
-2001/09/15 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added the PDQ panic button.
- Removed a superfluous "set_help" line.
- Save default spooler at program start, fixed typos in comments.
- Command line commands as "lpr", "lpq", ... are mapped to the correct
- spooler now.
- Fixed bug of a waiting message appearing together with a dialog
- Cleaned up variables to correctly switch between CUPS/Foomatic/Raw type
- for a printer
-
- * printer.pm: Added the PDQ panic button.
- Command line commands as "lpr", "lpq", ... are mapped to the correct
- spooler now.
-
- * standalone/printerdrake: Fixed bug of spooler choice via command line
- options being ignored.
-
-2001/09/15 warly
-
- * share/rpmsrate: add drakfirsttime
-
-2001/09/14 dam's <damien@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: make test_pms happy
-
- * install_any.pm: pptp-adsl instead of pptp-adsl-fr
-
- * Xconfigurator.pm: no shadow when X test
-
- * standalone.pm: bugfix
-
- * my_gtk.pm: no icon if wizard
- no shadow when X test
- shadow color
-
- * bootlook.pm: bugfix
- iautologin correction
-
- * mouse.pm: trying to remove draw
-
- * network/adsl.pm: debug
- pptp-adsl instead of pptp-adsl-fr
- bugfix
- updated speedtouch handling.
-
-2001/09/14 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: removed S3 ViRGE card from card with problem with
- frame buffer as it works fine.
-
- * Xconfigurator.pm: fixed filtering of depth for newt version.
- depth 24 is used for DRI for Rage 128 and Radeon instead of Depth 32 (as
- depth
- 32 simply doesn't work, even if DRI guide says it works :-) 24 bit works
- fine
- for Rage 128.
- apply restriction on depth available when changing resolution, removed
- S3 ViRGE
- from experimental 3D accelerated card list as it really does not work,
- allow on
- second pass to change card configuration to choose server (experimental
- server
- are still only available to expert), added support for UseCCEFor2D for
- Rage 128
- card if a TV card is installed (set to true, else set to false), added
- support
- for Rage Mobility M... card that are Rage 128 Mobile chipset, improved
- error
- message display to catch only appropriate error message of XFree 4.1.0
- only,
- added support for 32 bits for DRI using Matrox card, improved info
- message with
- real version of XFree used (anybody) and identifier from PCI probe
- (expert).
-
-2001/09/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/insmod-busybox/Makefile: clean also cleans the DIET target
-
- * mdk-stage1/Makefile, mdk-stage1/Makefile.mkinitrd_helper: back to using
- a reduced form of mkinitrd_helper for mkinitrd (only
- to provide a dietlibc-enabled static insmod)
-
-2001/09/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po: updated Walloon file
-
- * share/po/ko.po: updated Korean file
-
- * share/po/da.po: updated Danish file
- updated Danish file
-
- * share/po/bs.po, share/po/sv.po: updated Bosnian and Swedish files
-
-2001/09/14 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_raw.pm, install_any.pm: when testing for bad drives, if
- opening for writing fails, remove the drive from the hard drive list
- (useful for Smartmedia readers)
-
- * pkgs.pm: update correctSize and invCorrectSize (now linear)
-
- * share/po/fr.po: fix odin bug (please run msgfmt before committing!)
-
- * share/rpmsrate: do not install Aurora in russian
-
-2001/09/14 siegel
-
- * share/po/de.po: updates
-
- * standalone/drakautoinst: Check exisence of "/root/replay_install.img"
- before anything else ...
-
-2001/09/14 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Added "set_help" lines for installer help texts.
- Raw queue entry added, so cursor not always on "Alps MD-1000" when no
- printer
- detected.
- Resolved conflict.
- Now it is checked whether the network is configured and running.
- draknet is called when the network is not configured.
- It is checked whether the spooler is automatically started at boot.
- The oki4daemon is started when needed.
- Lexmarks inkjet drivers are fully integrated.
- The permissions of the device files are set so that normal users can
- print with PDQ.
-
- * standalone/printerdrake: Fixed spooler selection by command line.
-
- * printer.pm: Raw queue entry added, so cursor not always on "Alps
- MD-1000" when no printer
- detected.
- Made network checking working on non-english systems.
- Now it is checked whether the network is configured and running.
- draknet is called when the network is not configured.
- It is checked whether the spooler is automatically started at boot.
- The oki4daemon is started when needed.
- Lexmarks inkjet drivers are fully integrated.
- The permissions of the device files are set so that normal users can
- print with PDQ.
-
-2001/09/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po, share/po/tr.po: updated Turkish and Bulgarian files
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
- share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2001/09/13 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13 odin
-
- * share/po/fr.po: updated up to 6648
-
-2001/09/13 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: new migration feature for creation of
- partitions on existing mount points
-
- * diskdrake.pm:
- - add back shortcuts
- - red colored buttons in nfs/smb/removable
-
-2001/09/13 dam's <damien@mandrakesoft.com>
-
- * pixmaps/wiz_default_up.png, pixmaps/wiz_draknet.png: updated
-
- * my_gtk.pm: updated
- addde /usr/share/icons in path for pixmaps search
- shadow reduced to 5 pixels
-
- * standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
- trouble to XFree86 4.1.0.
-
- * Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
- fix for Matrox G550 support, now add DRI support.
- disable any question to user about XF3 if he choose a dual head
- configuration.
- disable DRI if Xinerama has been chosen.
- updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
- Tseng ET6\d00.
-
- * install_any.pm: updates 3D category according Matrox G550 and Radeon
- card.
-
- * install_steps.pm: synced with Xconfigurator bad_card class of video card
- to avoid using frame
- buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13 odin
-
- * share/po/fr.po: updated up to 6648
- updated fr.po
-
-2001/09/13 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: add krozat
-
- * any.pm (inspect): use a safer dir when standalone
-
- * install_steps.pm: extend disable KDE GreetString to
- ja|ko|zh|ru|th|vi|be|bg
- do not translate kdm GreetString in ja|ko|zh (what about ru?)
- in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
- * diskdrake_interactive.pm: new migration feature for creation of
- partitions on existing mount points
-
- * diskdrake.pm:
- - add back shortcuts
- - red colored buttons in nfs/smb/removable
-
- * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
- the fly without rebooting on a device with some already mounted
- partitions)
-
- * install_steps_interactive.pm (selectKeyboard): don't prompt in newbie
- mode if >=90, not >90
-
-2001/09/13 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: shadow reduced to 5 pixels
-
- * standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
- fix for Matrox G550 support, now add DRI support.
- disable any question to user about XF3 if he choose a dual head
- configuration.
- disable DRI if Xinerama has been chosen.
- updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
- Tseng ET6\d00.
- avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-
- * services.pm: updated repartition of services into category, network
- category are commented so
- that service will to "Other" one.
-
- * Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
- trouble to XFree86 4.1.0.
-
- * install_any.pm: updates 3D category according Matrox G550 and Radeon
- card.
-
- * install_steps.pm: synced with Xconfigurator bad_card class of video card
- to avoid using frame
- buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm: filtered the list from lang2keyboard to display only valid
- keyboards
-
- * c/stuff.xs.pm: add partition adding on the fly trick
-
- * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
- the fly without rebooting on a device with some already mounted
- partitions)
-
- * install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
- about ru?)
- in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/13 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13 François Pons <fpons@mandrakesoft.com>
-
- * lang.pm: fixed bad $localedir in load_mo().
-
- * g_auto_install: updated so that this scripts is running again.
-
- * install2.pm: do not output error message for bad kernel if using
- --g_auto_install.
-
- * install_steps_interactive.pm: fixed Printer name reporting for a
- specific printer.
-
- * install_any.pm: updates 3D category according Matrox G550 and Radeon
- card.
-
- * services.pm: updated repartition of services into category, network
- category are commented so
- that service will to "Other" one.
-
- * live_install2: updated #! as ../perl is not used.
-
- * my_gtk.pm: synced with --g_auto_install mode.
-
- * install_steps.pm: synced with Xconfigurator bad_card class of video card
- to avoid using frame
- buffer, added ET6\d00 style card which seems to have problem.
-
- * Xconfigurator.pm: fix for Matrox G550 support, now add DRI support.
- disable any question to user about XF3 if he choose a dual head
- configuration.
- disable DRI if Xinerama has been chosen.
- updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
- Tseng ET6\d00.
- avoid creating /etc/X11/XF86Config* file if --g_auto_install.
- synced with --g_auto_install mode.
- disable testing with all SiS card except SiS 630 under XF4.
-
-2001/09/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/pl.po, share/po/pt.po, share/po/no.po,
- share/po/th.po, share/po/sr.po, share/po/sk.po, share/po/lt.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/lv.po,
- share/po/uk.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
- share/po/id.po: updated pot file
-
-2001/09/13 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm: filtered the list from lang2keyboard to display only valid
- keyboards
-
- * c/stuff.xs.pm: add partition adding on the fly trick
-
- * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
- the fly without rebooting on a device with some already mounted
- partitions)
-
- * install2.pm (selectKeyboard): remove code causing
- install_steps::selectKeyboard to be skipped
-
- * install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
- about ru?)
- in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/12 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: typo
- new color for shadow
- corrected shadow handling
- no shadow if liveupdate
-
- * share/help.png: new help
-
- * mouse.pm: removed debug code
-
- * network/tools.pm, network/netconnect.pm, network/ethernet.pm,
- network/isdn.pm, network/adsl.pm, network/modem.pm: new default
- connection handling
-
- * standalone.pm: added wait message while installing package
-
-2001/09/12 daouda
-
- * standalone/drakbug_report: add Mandrake release section
-
-2001/09/12 fcrozat
-
- * share/rpmsrate: Fix gnome install
-
-2001/09/12 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: removed obsolete --nocpi flag for install2.
- avoid probing usb device (for mouse) if --noauto is given.
-
- * install_steps.pm: disabled frame buffer for most of the SiS display card
- except SiS 630.
-
- * Xconfigurator.pm: added MGA G550 as always having two head.
-
- * live_install2: fix when switching perl version.
-
- * live_install: use system perl instead.
-
-2001/09/12 gbeauchesne
-
- * share/list.ia64, share/list, share/list.i386:
- - list (/sbin/mkfs.jfs, /sbin/mkfs.xfs): Move to...
- - list.i386: ... Here.
- - list.ia64: Updates.
-
-2001/09/12 odin
-
- * share/po/fr.po: updated fr.po
-
-2001/09/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
- share/po/et.po, share/po/el.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/hr.po, share/po/vi.po, share/po/ca.po,
- share/po/gl.po, share/po/eo.po, share/po/help_xml2pm.pl, share/po/wa.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po,
- share/po/it.po, share/po/af.po: updated pot file
-
- * help.pm: new version with [ and ]
-
- * lang.pm: commented out utf-8 russian locale, for now
-
-2001/09/12 Pixel <pixel@mandrakesoft.com>
-
- * standalone/lsnetdrake: fix typo
- added wonderful lsnetdrake
-
- * modules.pm, install2.pm: display error when the kernel mismatch the
- modules
-
- * docs/README: explain how to get the boot kernels
-
- * install_steps_gtk.pm (choosePackagesTree): translate the categories
-
- * standalone/drakbug_report: cleanup
-
- * bootloader.pm (suggest): no "quiet" boot for smp and enterprise kernels
- (suggest): no "quiet" boot for smp and enterprise kernels
- allow grub even for more than 800MB
-
- * Makefile.drakxtools, Makefile.config: added wonderful lsnetdrake
-
-2001/09/12 siegel
-
- * share/po/de.po: new & shiny verion
-
- * share/po/help_xml2pm.pl: fixed silly error
- added keycap patch
-
-2001/09/12 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: corrected shadow handling
- no shadow if liveupdate
- table undef corrected
- removed shadows if standalone
-
- * standalone/drakgw, standalone/draknet: corrected wizard mode in newt
- mode
-
- * mouse.pm: removed debug code
-
- * network/netconnect.pm: corrected splash in non X mode
-
-2001/09/12 daouda
-
- * standalone/drakbug_report: add Mandrake release section
-
-2001/09/12 François Pons <fpons@mandrakesoft.com>
-
- * live_install2: fix when switching perl version.
-
- * live_install: use system perl instead.
-
-2001/09/12 kjx
-
- * share/po/zh_CN.po: revison
-
-2001/09/12 Pixel <pixel@mandrakesoft.com>
-
- * docs/README: explain how to get the boot kernels
-
- * install_steps_gtk.pm (choosePackagesTree): translate the categories
-
- * standalone/drakbug_report: cleanup
-
- * bootloader.pm: allow grub even for more than 800MB
-
-2001/09/11 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: removed useless print
- don't detect ethx if no autodetection.
- implement smarter checkboxes
-
- * mouse.pm: test updated
- mouse test worked
-
- * network/ethernet.pm: don't detect ethx if no autodetection.
- implement smarter checkboxes
-
- * pixmaps/arrow_down.xpm: pixmap corrected
- new arrows
-
- * pixmaps/arrow_up.xpm: new arrows
-
- * share/rpmsrate: added ibod
- added isdn-light
-
- * interactive_gtk.pm, my_gtk.pm: fear the shaped windows...
-
-2001/09/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * help.pm: small fix
-
- * share/po/fr.po, share/po/de.po, share/po/DrakX.pot, share/po/hu.po,
- share/po/it.po: updated Hungarian file;
- updated pot file
-
-2001/09/11 Pixel <pixel@mandrakesoft.com>
-
- * Makefile (tar-drakxtools): remove the building of "help" for drakxtools
-
- * bootloader.pm: for lilo, do not have table=/dev/xxx if the device is not
- a primary
- partition (otherwise lilo dies)
-
-2001/09/10 dam's <damien@mandrakesoft.com>
-
- * network/modem.pm, network/ethernet.pm: detect_devices
-
- * standalone/net_monitor, network/network.pm: removed timeout:1 in
- resolv.conf, modified timeout scanning in draknet/net_monitor
-
- * install_gtk.pm, install_steps_gtk.pm: mouse test moved
-
- * mouse.pm: test_mouse moved
-
- * my_gtk.pm: added border
- window decorations
- no set_events if embedded
-
- * standalone/draknet: removed timeout:1 in resolv.conf, modified timeout
- scanning in draknet/net_monitor
- debug
-
- * standalone/mousedrake: don't fork the code
-
- * network/adsl.pm: debug
- debug
-
-2001/09/10 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: updated g_auto_install() for newer printerdrake
- interface.
-
- * modules.pm, detect_devices.pm: moved modules::get_pcmcia_devices into
- detect_devices::pcmcia_probe.
-
- * mdk-stage1/init-data/msgboot-blank.img.bz2: initial release for
- blank.img floppy image.
-
- * install_steps_interactive.pm, mouse.pm: added hid type usb mouse
- support.
-
- * Xconfigurator_consts.pm: added some more ModeLine (1024x768 @ 97.6 Hz,
- 1024x480 but not automatically used).
-
-2001/09/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: plop
- some adjustements in Games section
-
-2001/09/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/de.po: updated German file; added choice of
- various quotes in help_xml2pm.pl
- Updated pot file;
- removed translations that are too low on percentage.
-
- * share/po/zh_TW.po: updated Chinese file
-
- * share/po/ko.po: updated Korean file
- Updated pot file;
- removed translations that are too low on percentage.
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated pot file;
- removed translations that are too low on percentage.
-
- * share/po/help_xml2pm.pl: updated German file; added choice of various
- quotes in help_xml2pm.pl
-
-2001/09/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm, my_gtk.pm:
- - make diskdrake work in embedded mode
- - $my_gtk::pop_it used where it should
-
- * detect_devices.pm: fix ide-scsi appearing 2 times when standalone
- because both in /proc/ide
- and /proc/scsi/scsi
-
- * share/po/help_xml2pm.pl: s/my/our/ for $i18ned_... vars
- - skip directories missing drakx-help.xml
- - convert to the right charset (taken from $lang.po)
- - rename help-*.po by help-*.pot
- - fix typo in script removing $lang.po translations to favour
- help-*.pot
-
- * diskdrake.pm:
- - make diskdrake work in embedded mode
- - $my_gtk::pop_it used where it should
- fix Umount and Mount when i18ned for nfs/smb
- don't display Wizard if wizard done before DrakX
-
- * share/po/Makefile, share/po/.cvsignore:
- - rename help-*.po by help-*.pot
- - fix typo in script removing $lang.po translations to favour
- help-*.pot
-
-2001/09/10 siegel
-
- * share/po/de.po: updates
-
-2001/09/10 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Copying of PPD file when moving a CUPS (non-Foomatic) queue
- modified to not get
- interactive when overwriting a file.
- Comment put into non-Foomatic CUPS PPD files in /etc/cups/ppd/ to be
- able to
- identify which PPD from /usr/share/cups/model was used (for
- auto-install).
-
-2001/09/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated pot file;
- removed translations that are too low on percentage.
-
-2001/09/10 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile, share/po/.cvsignore, share/po/help_xml2pm.pl:
- - rename help-*.po by help-*.pot
- - fix typo in script removing $lang.po translations to favour
- help-*.pot
-
-2001/09/09 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: probeall handling
-
-2001/09/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: getAndSaveInstallFloppy: fix multiple cdrom issue
-
-2001/09/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
- * share/po/sv.po: updated Swedish file
-
-2001/09/09 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (ejectCdrom): fix D state on exit
-
- * diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm:
- - "Wizard" and "More" are back
- - allow "Use for loopback" when there is already a loopback
- - set the options on newly created partitions
- - recompute_loopbacks called after modification of loopbacks, no more
- before reading
- - restrict the lenght of the lines in partition description
- - make loopback work
-
- * interactive_gtk.pm, interactive.pm, any.pm, interactive_newt.pm:
- clicked_may_quit used in place of clicked+exception to work-around
- perl-GTK bug (?)
-
- * share/po/i18n_compssUsers: ensure we're not adding a string already
- there (otherwise msgmerge yells)
-
- * share/po/help_xml2pm.pl, share/po/.cvsignore: xml help
- handling/enhancing for multi-langs
-
- * modules.pm: probeall handling
- (write_conf): switch to "probeall scsi_hostadapter ..."
-
- * share/po/Makefile: xml help handling/enhancing for multi-langs
- xml help handling/enhancing for multi-langs
-
- * partition_table.pm (get_normal_parts_and_holes): remove only small
- holes, not small partitions
-
- * fs.pm (set_default_options): remove iocharset=... for nfs (why was it
- there?)
-
-2001/09/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix some ortograf
-
- * share/rpmsrate: lvm not installed for everyone ?!
-
-2001/09/08 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm: force exitInstall to be non automatic
-
- * install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
- diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
- installs work again
-
-2001/09/09 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (write_conf): switch to "probeall scsi_hostadapter ..."
-
-2001/09/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix some ortograf
-
- * share/rpmsrate: lvm not installed for everyone ?!
-
- * modules.pm: fix write_conf regarding /etc/modules so that (1) it doesn't
- flush it when
- it didn't decide to put any modules in it (to leave user's modules) (2)
- it
- doesn't remove the last line (3) it uses stronger regexp'es for
- substitution to not remove modules that have names made of other modules
- names subsets
-
-2001/09/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/zh_TW.po: updated Chinese file
-
-2001/09/08 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm: fix font in iso-15
-
- * modules.pm (write_conf): put "probeall scsi-hosts scsi_hostadapter ..."
-
- * interactive.pm: ugly workaround perl bug ([ID 20010908.008] memory leak
- with nested subs)
-
- * share/diskdrake.rc: change name
-
- * install_steps_auto_install.pm: force exitInstall to be non automatic
-
- * install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
- diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
- installs work again
-
- * timezone.pm: Asia/Taipei for Traditional Chinese
-
- * detect_devices.pm: remove debug code
-
-2001/09/07 daouda
-
- * share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07 fcrozat
-
- * share/rpmsrate: Add grio500
-
-2001/09/07 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
- result).
- fix all Matrox card used with XF4 which really does not like X in frame
- buffer
- (unable to restore frame buffer of DrakX).
-
-2001/09/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/tree/etc/oem, rescue/guessmounts, rescue/list.i386,
- rescue/tree/etc/rc.sysinit: ext3, xfs, jfs
-
- * bootloader.pm: use -v for mkinitrd
-
- * share/po/fr.po: "reseaux" and plurals
- misc
-
- * share/rpmsrate: some work on games
-
-2001/09/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po, share/po/vi.po: updated Vietnamese and Japanese files
-
-2001/09/07 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: cleanup po
-
- * install_steps.pm: s|kdmrc|kdm/kdmrc|
-
- * lang.pm: fix load_mo call
-
- * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
- * diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
- disable_forced_fsck called for ext3 formatting
- (Type): disable fsck when migrated ext2->ext3
-
- * fs.pm: disable_forced_fsck called for ext3 formatting
-
-2001/09/07 siegel
-
- * share/po/de.po: updates
-
-2001/09/07 Till Kamppeter <till@mandrakesoft.com>
-
- * standalone/printerdrake, printer.pm, printerdrake.pm: Data structure
- fitted for auto-install to work
- Optimized program to be much faster
- Many more waiting messages
- Many bugfixes
-
-2001/09/07 daouda
-
- * share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07 fcrozat
-
- * share/rpmsrate: Add grio500
-
-2001/09/07 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
- result).
- fix all Matrox card used with XF4 which really does not like X in frame
- buffer
- (unable to restore frame buffer of DrakX).
-
-2001/09/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * any.pm: Changed simple quote to double quote for a translatable string
- (otherwise
- it isn't seen)
-
- * share/po/es.po: updated Spanish file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
- share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po,
- share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
- updated pot file
-
- * share/po/sv.po: updated Swedish file
- updated pot file
-
-2001/09/07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: s|kdmrc|kdm/kdmrc|
- remove the "konsole and gnome-terminal are lamers in exotic languages,
- link them to something better"
-
- * bootloader.pm (write_lilo_conf): fix typo
-
- * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
- * diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
- disable_forced_fsck called for ext3 formatting
- (Type): disable fsck when migrated ext2->ext3
-
- * install_any.pm, keyboard.pm: cleanup
-
- * partition_table.pm, share/list: add xfs
-
- * fs.pm: disable_forced_fsck called for ext3 formatting
-
- * share/rpmsrate: add jfsprogs
-
-2001/09/07 siegel
-
- * share/po/de.po: updates
- updates/fixes
-
-2001/09/06 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/tools.pm: corrected speedtouch
-
- * install_gtk.pm: removed comments
-
-2001/09/06 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
- XFree 4.1.0 is not bad, and
- all NVIDIA card are no more considered bad.
-
- * pkgs.pm: fixed retry of package 3 times everytime even if first install
- succeeded, now
- after first successfull install, go to next package to install.
-
- * install_steps.pm: removed some cards for allowing frame buffer.
-
-2001/09/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: works now ;p
-
-2001/09/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: 'zh' in LANGUAGE for Chinese is needed by DrakX
- corrected lang.pm to have coherence in locale usage (it was the source
- of much of the problems); changed keyboard.pm to ignore charset encoding
- in locale name for locale -> keyboard guessing.
- removed unused gconv modules, converted az.po to utf-8 (as it was the
- only
- remaining az.po on Earth still in a non standard encoding)
-
- * share/list, share/gen_locales.sh, share/locales-skeleton.tar.bz2,
- keyboard.pm, share/po/az.po: corrected lang.pm to have coherence in
- locale usage (it was the source
- of much of the problems); changed keyboard.pm to ignore charset encoding
- in locale name for locale -> keyboard guessing.
- removed unused gconv modules, converted az.po to utf-8 (as it was the
- only
- remaining az.po on Earth still in a non standard encoding)
-
-2001/09/06 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: fix keyboard config + some cleanup
- cleanup (use /proc/self instead of /proc/$$)
-
- * install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
- keyboard config + some cleanup
-
-2001/09/06 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/tools.pm: corrected speedtouch
-
- * install_gtk.pm: removed comments
-
-2001/09/06 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
- XFree 4.1.0 is not bad, and
- all NVIDIA card are no more considered bad.
- avoid using @resolutions_laptop, now use only @resolutions, this means
- 1400x1050
- is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
- (so
- 1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
- file).
-
- * install_steps.pm: removed some cards for allowing frame buffer.
- fix log when configuring printer queue.
-
- * Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
- cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
- and
- 1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
- * pkgs.pm: fixed retry of package 3 times everytime even if first install
- succeeded, now
- after first successfull install, go to next package to install.
-
- * install_any.pm: update printer data for g_auto_install.
-
-2001/09/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: works now ;p
-
-2001/09/06 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: fix keyboard config + some cleanup
- cleanup (use /proc/self instead of /proc/$$)
-
- * install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
- keyboard config + some cleanup
-
- * fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
- type
-
-2001/09/06 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/tools.pm: corrected speedtouch
-
- * install_gtk.pm: removed comments
- new mouse test
-
-2001/09/06 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: revert previous patch, this is not usable with current rpm as
- it complains if
- one the file has a modified MD5SUM against the header describing it in
- the
- hdlist, so this is most of the time useless.
- guess filename if the file is not found (for an rpm file during
- installation),
- so try with release incremented in such case (good for Cooker user or
- local
- tester using network installation).
-
- * install_steps.pm: fix log when configuring printer queue.
-
- * Xconfigurator.pm: avoid using @resolutions_laptop, now use only
- @resolutions, this means 1400x1050
- is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
- (so
- 1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
- file).
-
- * Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
- cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
- and
- 1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
- * install_any.pm: update printer data for g_auto_install.
-
- * printerdrake.pm: revert previous commit.
- added a missing ifup lo, on some case (auto_install) it fails.
-
- * printer.pm: start ifup lo before starting service cups.
-
-2001/09/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
- * share/po/ga.po, share/po/no.po: updated Irish and Norwegian files
-
-2001/09/06 Pixel <pixel@mandrakesoft.com>
-
- * share/diskdrake.rc, fsedit.pm, diskdrake.pm: add journalised in legend,
- fix the use
-
- * diskdrake_interactive.pm (Add2LVM): do not allow spaces in lvm names
-
- * fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
- type
-
- * timezone.pm (ntp_server): fix (step-tickers was empty)
-
-2001/09/05 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor, standalone/draknet: corrected opeions
-
- * standalone/mousedrake: typo
- updated
-
- * network/tools.pm: corrected initcript
-
- * pixmaps/mouse_middle.xpm, pixmaps/mouse_right.xpm,
- pixmaps/mouse_left.xpm: new pixmaps
-
-2001/09/05 Pixel <pixel@mandrakesoft.com>
-
- * standalone/diskdrake: fix function called
-
-2001/09/05 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Set default printer (all spoolers), manual
- config (CUPS), bugfixes, clean-ups.
-
-2001/09/05 dam's <damien@mandrakesoft.com>
-
- * pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
- pixmaps/wiz_drakgw.png: new icons
-
- * share/themes-mdk.rc: updated theme
-
- * standalone/draknet: interface display corrected
-
- * share/themes/mdk-button4.png, share/themes/mdk-button1.png: new buttons
-
- * install_gtk.pm: 2 sec without sensitives buttons
-
- * network/netconnect.pm: only if standalone
-
- * pixmaps/network.png, pixmaps/bootloader.png, pixmaps/printer.png,
- pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png,
- pixmaps/keyboard.png, pixmaps/X.png, pixmaps/mouse.png,
- pixmaps/bootdisk.png: new pixmaps
-
-2001/09/05 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed display of XFdrake test image (fcrozat).
-
- * install_steps.pm: fixed typo preventing removable devices to be seen in
- /etc/fstab.
- fixed configurePrinter (used for auto_install).
-
- * install_steps_interactive.pm: avoid asking when using existing partition
- for magic partition with a real
- mntpoint (typically /tmp/hdimage) if we are not using a ramdisk (so
- partition is
- not unmountable).
-
- * bootloader.pm: removed yvounet sucking, handle Mandrake lilo or unknown
- lilo.
-
- * fs.pm: fix bad creation of /mnt/hd for an hd installation without
- ramdisk.
- support setting /tmp/hdimage in /etc/fstab even if memory is low (not
- using ramdisk).
-
- * install_any.pm: filtering $o->{printer} for g_auto_install().
- allow installing urpmi on hd install even if low memory (so not using
- ramdisk).
-
- * diskdrake_interactive.pm: Do not use for loopback of magic partition
- (/tmp/hdimage).
-
-2001/09/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/i386/busybox: hopefully fix the _ problems with busybox 0.60.1
-
-2001/09/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bs.po: updated Bosnian file
-
- * share/po/uk.po: updated Ukrainian file
-
-2001/09/05 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: use EISA_ID in more cases to have the name
- non-case dependent EISA comparison
- also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
- there, but not the [hv]syncrange
-
- * Xconfig.pm: fix typos
- non-case dependent EISA comparison
- also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
- there, but not the [hv]syncrange
-
- * modules.pm: favor tmscsim over AM53C974
-
- * tools/ddcprobe/ddcxinfos.c: fix for cards giving bad info
- also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
- there, but not the [hv]syncrange
-
- * standalone/diskdrake: fix function called
-
-2001/09/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/eo.po, share/po/bs.po, share/po/ro.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
- Updated Danish file; updated pot file
-
-2001/09/04 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix typo
-
-2001/09/04 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Fitted to the new Foomatic version.
- Fixed bug of spooler change only working when language is English.
-
-2001/09/04 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fix bad vga= which go for some install.
-
-2001/09/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * network/netconnect.pm: small english change
-
- * mdk-stage1/probing.c: Compaq mescouilles has changed proc stuff
-
- * share/rpmsrate: tetex-doc
-
- * mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
- share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
- share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
- Updated Danish file; updated pot file
-
- * share/po/ja.po: updated Japanese file
-
-2001/09/04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (add_alias): use "above" instead of "post-install"
-
- * partition_table.pm: re-add JFS
-
- * fsedit.pm, common.pm, bootloader.pm:
- - don't expand symlinks in grub's menu.lst
- - better use of /proc/partitions verification
-
- * detect_devices.pm (getCompaqSmartArray): add yet another location for
- cpqarray location
-
- * fs.pm: fix typo
- mount ext3 as ext2 during install for speed up
-
-2001/09/04 fcrozat
-
- * share/rpmsrate: Add plugins for KDE and Mozilla
-
-2001/09/04 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fix bad vga= which go for some install.
-
- * pkgs.pm: cleanup to avoid invalid file error.
-
-2001/09/04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (add_alias): use "above" instead of "post-install"
-
- * fs.pm: mount ext3 as ext2 during install for speed up
-
- * partition_table.pm: re-add JFS
-
- * fsedit.pm, common.pm, bootloader.pm:
- - don't expand symlinks in grub's menu.lst
- - better use of /proc/partitions verification
-
- * detect_devices.pm (getCompaqSmartArray): add yet another location for
- cpqarray location
-
-2001/09/04 yduret
-
- * my_gtk.pm: emebedded mode fix
-
- * interactive_gtk.pm, diskdrake.pm: embedded mode fix
-
-2001/09/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: unfuzzy-ise a few things, translate a few things
-
-2001/09/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po: updated Korean file
-
-2001/09/03 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: fix for lvm (non-)creation of devices
-
-2001/09/03 yduret
-
- * my_gtk.pm, diskdrake.pm: fix Embedded mode
-
-2001/09/03 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: added timeout in resolv.conf
-
-2001/09/03 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: updated to use new urpmi.cfg format for install_urpmi,
- make sure the directory
- is not given for ftp and http install ($dir).
-
- * Xconfigurator_consts.pm: added 1920x1440 and 2048x1536.
-
- * Xconfig.pm: make sure a staling Mouse2 is not present unless it really
- physically exists.
-
-2001/09/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: add axnet_cs to pcmcia category
-
- * mdk-stage1/probing.c: change `scd' with `sr'
-
-2001/09/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/es.po: updated Spanish file
-
- * share/po/ko.po: updated Korean file
-
-2001/09/03 Pixel <pixel@mandrakesoft.com>
-
- * timezone.pm (ntp_server): also set /etc/ntp/step-tickers
-
- * fsedit.pm, devices.pm: fix mtab reading and pseudo-device use
-
- * interactive_gtk.pm: better sizing for combo boxes
-
- * install_steps_interactive.pm (choosePartitionsToFormat): do not propose
- to propose already formatted
- fat partitions
-
- * share/list: those files disappeared ??
-
- * fs.pm: fix for lvm (non-)creation of devices
- (set_default_options): created
- fix mtab reading and pseudo-device use
-
- * diskdrake.pm (smb_create, nfs_create): make the "New" button work
- (raw_hd_mount_point): fix checking the same mount point
- (try_): fix error displaying
-
- * partition_table.pm: fix switching to 0x85 extended when
- remove_empty_extended is called
-
-2001/09/03 yduret
-
- * standalone/net_monitor: sync with new logdrake command line options
-
-2001/09/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bs.po: updated bosnian file
- Added Bosnian file
-
-2001/09/01 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: avoid deleting package from %packages in install() when closing
- fd associated,
- if the open is called again (?), it will cause an invalid file (seems to
- happens
- on some invalid file).
-
-2001/08/31 dam's <damien@mandrakesoft.com>
-
- * standalone/draksec: corrected yesno interpretation
- libsafe modification
-
- * network/netconnect.pm: corrected profil recording for modem
-
- * standalone/net_monitor: correted typo
-
- * network/ethernet.pm: corrected zero return when cable configuring
-
- * any.pm: corrected autologin : no uc anymore
-
- * network/modem.pm: added domainname2 setting
-
- * share/logo-mandrake.png: new logo
-
-2001/08/31 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added missing AlwaysCore line for second mouse for
- XF3.
-
- * mouse.pm: added missing AlwaysCore line for second mouse in XF3.
-
- * standalone.pm: add option --allow-medium-change to force asking question
- even if --auto is
- given on command line of urpmi, for installing package so that a dialog
- appears.
-
-2001/08/31 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: mures is a fine game, have it at weight "4" under GAMES
- section
- have "numlock" in INSTALL because it's the only package which goes to
- CD#2
- when you unselect all groups, so having it here will allow not changing
- CD
- with this kind of small install
-
-2001/08/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/uk.po, share/po/es.po: updated Ukrainian
- and Spanish files
-
- * share/po/sv.po: updated Swedish file
- updated Ukrainian and Spanish files
-
-2001/08/31 siegel
-
- * share/help_sav.png: not used any more
-
- * share/po/de.po: updates
-
- * share/logo-mandrake2.png, share/logo-mandrake_trans.png,
- share/logo-mandrake_sav.png, share/logo-mandrake-Desktop.png: old
- versions => not in use any more
-
-2001/08/31 yduret
-
- * bootlook.pm: updated code
-
-2001/08/30 dam's <damien@mandrakesoft.com>
-
- * network/tools.pm: nicer display
-
- * standalone/draknet: added use common.pm (can be usefull, eh?)
-
- * network/network.pm: silently /sbin/ip
- track_network_id only if laptop
-
-2001/08/30 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: Updated Danishfile
- updated pot file (I had lost the group descriptions, sorry, they are
- back now)
- moved chinese files to charset independent names
-
- * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
- share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
- share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file (I
- had lost the group descriptions, sorry, they are back now)
- moved chinese files to charset independent names
-
-2001/08/30 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (read): it works now
-
- * help.pm: fixed (was utf8)
-
- * install_steps_gtk.pm (new): call interactive_gtk::new
-
- * install_steps.pm, Xconfigurator.pm: disable gpm (in case of serial
- mouse) before service choice
-
- * pkgs.pm (naughtyServers): update for 8.1
-
-2001/08/30 dam's <damien@mandrakesoft.com>
-
- * interactive.pm: corrected icon display
-
- * my_gtk.pm: new wizard
-
- * interactive_gtk.pm: corrected wizard mode display height/width
-
- * standalone/draknet: added draknet client installation
-
- * network/network.pm: track_network_id only if laptop
- dhcp package installation
-
- * pixmaps/wiz_default_left.png: new logo
-
-2001/08/30 François Pons <fpons@mandrakesoft.com>
-
- * mouse.pm: make sure to update all symlink according to any mouse (max 2)
- probed.
- fix previous fixes on mouse::write_conf
-
- * standalone/mousedrake: fix previous fix (typo).
- keep mouse specific paramater if user does not change its mouse.
- make sure --auto is not interactive on some part.
- use default value for port device if a serial mouse.
-
- * printer.pm: fixed foomatic failed (no lo up since ifup lo don't run)
-
- * Makefile: ugly to make sure standalone/pixmaps is not here when building
- tar-drakxtools.
-
- * Xconfig.pm: when reading existing configuration for mouse, update
- type|name for second mouse too.
- make sure default to set 3 for nbuttons for getinfoFromXF86Config for
- second
- mouse if this mouse has 3 buttons.
-
- * Xconfigurator.pm: for single heads mode, no screen id should be set in
- file (or XFree is going
- mad, but he is right, no ?)
-
- * install_any.pm: if a medium is refused, get rid of it definitively until
- it is accepted again.
-
-2001/08/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps_interactive.pm: have a wait_message during installation of
- bootloader
-
- * mdk-stage1/pcmcia/pcmcia_probe.c: import new PCI ID's for more PCMCIA
- Controllers, from probe.c-1.54 of pcmcia-cs-3.1.28
-
-2001/08/30 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po, share/po/vi.po, share/po/es.po: updated Japanese,
- Spanish and Vietnamese files
-
-2001/08/30 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: allow LVM on RAID
-
- * help.pm: fixed (was utf8)
-
- * any.pm: cleanup
-
- * pkgs.pm (naughtyServers): update for 8.1
-
- * lang.pm (read): it works now
-
- * fs.pm (set_default_options): "ro" for cdroms, "user" for vfat only if
- removable
- media
-
- * share/po/Makefile: fix utf8 translation of xml file
-
- * interactive_gtk.pm: fix&cleanup window size
-
- * tools/Makefile: cleanup unneeded stuff
-
-2001/08/30 siegel
-
- * share/po/de.po: new german version
-
-2001/08/30 warly
-
- * share/rpmsrate: add koffice-i18n diald vlan-utils
-
-2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw, standalone/drakautoinst: quit_global
-
- * share/po/fr.po: minor fix
-
-2001/08/29 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: fix language selection
-
- * c.pm: better error message when function c::foo() is missing
-
- * rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
- in /)
-
-2001/08/29 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed if undef encountered in depslist when installing package
- (traversing
- depslist as $depOrder).
-
-2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw, standalone/drakautoinst: quit_global
-
- * share/po/fr.po: minor fix
-
-2001/08/29 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: fix language selection
-
- * c.pm: better error message when function c::foo() is missing
-
- * install_steps_gtk.pm (installPackages): have Ok button by default for
- asking for changing CD
-
- * bootloader.pm (mkbootdisk): cleanup
-
- * rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
- in /)
-
- * devices.pm: remove fd0H1440 and fd1H1440
-
- * modules.pm: remove "msdos"
-
-2001/08/29 François Pons <fpons@mandrakesoft.com>
-
- * mouse.pm: improved write_conf to enable multi-mice if only once mice is
- already defined.
-
- * standalone/mousedrake: try to merge already existing mouse configuration
- with what has been probed,
- change if mouse is really changed as probe is incomplete.
-
- * Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
- * pkgs.pm: fixed if undef encountered in depslist when installing package
- (traversing
- depslist as $depOrder).
-
-2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw, standalone/drakautoinst: quit_global
-
- * share/po/fr.po: minor fix
-
-2001/08/29 Pixel <pixel@mandrakesoft.com>
-
- * c.pm: better error message when function c::foo() is missing
-
- * keyboard.pm (loadkeys_files): fixed
-
- * install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
- Makefile.config: add localedrake (not tested)
-
- * rescue/make_rescue_img: make it work (do not have the dev in /)
- cleanup, speedup, use mknod for devices
-
- * install_steps_gtk.pm (installPackages): have Ok button by default for
- asking for changing CD
-
- * rescue/devices.pl, rescue/list: cleanup, speedup, use mknod for devices
-
- * bootloader.pm (mkbootdisk): cleanup
-
- * rescue/dirs: make it work (do not have the dev in /)
-
- * devices.pm: remove fd0H1440 and fd1H1440
-
- * modules.pm: remove "msdos"
-
-2001/08/29 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/tools.pm, share/rpmsrate: speedtouch
- configuration
-
-2001/08/29 François Pons <fpons@mandrakesoft.com>
-
- * mouse.pm: improved write_conf to enable multi-mice if only once mice is
- already defined.
-
- * install_steps.pm: add support for mandatory frame buffer support (SiS
- 630) need them for XF3 to
- work properly, XF4 does work with it nicely.
-
- * Xconfigurator.pm: make sure Port entry for wacom is placed first.
-
- * standalone/mousedrake: try to merge already existing mouse configuration
- with what has been probed,
- change if mouse is really changed as probe is incomplete.
-
- * Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-2001/08/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: games
-
-2001/08/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po, share/po/DrakX.pot, share/po/es.po: updated Danish file
-
-2001/08/29 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, install_any.pm, fsedit.pm, diskdrake.pm: try to better handle
- symlinks device and devfs devices
-
- * install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
- Makefile.config: add localedrake (not tested)
-
- * install_steps.pm: no need to have devfs=nomount anymore in root raid
- do not modify fstab options in upgrade
-
- * keyboard.pm (loadkeys_files): fixed
- fix DISABLE_WINDOWS_KEY state handling (for upgrade), cleanup
-
- * diskdrake_interactive.pm: try to better handle symlinks device and devfs
- devices
- (main): fix
- (Create): fix typo causing primaryOrExtended to be ignored
-
- * rescue/devices.pl, rescue/make_rescue_img, rescue/list: cleanup,
- speedup, use mknod for devices
-
- * c/stuff.xs.pm, detect_devices.pm: better floppy detection/info
-
-2001/08/28 dam's <damien@mandrakesoft.com>
-
- * interactive.pm, install2.pm: corrected icon handling
-
- * services.pm: added cupslpd in printing section
-
-2001/08/28 François Pons <fpons@mandrakesoft.com>
-
- * Makefile.config: really fix typo...
- fixed typo.
-
-2001/08/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po: updated Czech file
-
-2001/08/28 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove the temporary file /tmp/autoinst.img
-
- * install_steps.pm, install_steps_interactive.pm: propose to format / and
- /usr even if isFormatted. More generally do not trust isFormatted to
- show which partitions to format
-
-2001/08/28 siegel
-
- * ChangeLog, keyboard.pm:
- - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
- if no laptop is detected (= give users the chance to know about the
- existence of this variable).
-
-2001/08/28 yduret
-
- * standalone/diskdrake: embedded mode nicer
-
-2001/08/28 dam's <damien@mandrakesoft.com>
-
- * interactive.pm, install2.pm: corrected icon handling
-
-2001/08/28 François Pons <fpons@mandrakesoft.com>
-
- * share/list: added /sbin/e2fsck
-
- * share/aliases: added fsck.ext2 -> e2fsck (now in list file)
- removed e2fsck.shared as e2fsprogs now provide a shared version instead
- of a
- static one.
-
- * Makefile.config: really fix typo...
- fixed typo.
- removed reference to e2fsck.shared (now use e2fsck from package which is
- shared
- since 1.23-2mdk).
-
-2001/08/28 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: remove the temporary file /tmp/autoinst.img
-
-2001/08/28 siegel
-
- * ChangeLog, keyboard.pm:
- - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
- if no laptop is detected (= give users the chance to know about the
- existence of this variable).
-
-2001/08/28 yduret
-
- * standalone/diskdrake: embedded mode nicer
-
-2001/08/28 Stefan Siegel <siegel@mandrakesoft.com>
-
- * keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
- if no laptop is detected (= give users the chance to know about
- the existence of this variable).
-
-2001/08/28 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: typo
-
-2001/08/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: default the licence agreement to "Refuse"
-
- * standalone/drakboot: security fix and various
- move to all_hds stuff
-
- * c/stuff.xs.pm, bootloader.pm: security fix and various
-
-2001/08/28 warly
-
- * share/rpmsrate: move libsafe to SERVER_OTHER 2
- added prelude, libsafe...
-
-2001/08/28 yduret
-
- * standalone/drakxconf: readded dsikdrake
- added new items, remove some old ones
-
-2001/08/27 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: corrected hwaddr setting and draknet first window
- display
- corrected typo
-
- * network/netconnect.pm: corrected hwaddr setting and draknet first window
- display
-
-2001/08/27 dam's <damien@mandrakesoft.com>
-
- * network/network.pm: corrected hwaddr setting and draknet first window
- display
- corrected typo
-
- * network/netconnect.pm: corrected hwaddr setting and draknet first window
- display
-
-2001/08/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm: nicer help display
-
- * share/keyboards.tar.bz2: fix the rights
-
- * c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: corrected bad window size
-
- * network/network.pm: make it compile
- corrected hwaddr stuff
- added HWADDR
-
- * network/tools.pm: corrected internet initscript
-
- * any.pm, mouse.pm: make it compile
- add_devfslink
-
-2001/08/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
- Added Latvian keyboard
-
- * share/keyboards.tar.bz2: Checked and updated xmodmap files for DrakX
-
- * share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm: nicer help display
-
- * diskdrake.pm: use empty hash instead of the raid/loopback array
-
- * c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: corrected bad window size
-
- * network/network.pm: added HWADDR
-
- * network/tools.pm: corrected internet initscript
-
-2001/08/27 François Pons <fpons@mandrakesoft.com>
-
- * any.pm, standalone/draknet, network/modem.pm: added Borsenkow Andrej
- patch to support CHAP again.
-
-2001/08/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
- Added Latvian keyboard
-
-2001/08/27 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: use empty hash instead of the raid/loopback array
-
-2001/08/26 warly
-
- * share/rpmsrate: add some important packages
-
-2001/08/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakautoinst: require -> use
-
- * install_any.pm: save the .img file so that multi-cd install won't ask to
- re-enter first cd
-
-2001/08/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/26 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile, share/po/.cvsignore: fetch directly the latest
- drakx-help.xml
-
-2001/08/25 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakbug_report: add "rpm -qa"
-
- * bootlook.pm: fix deprecated call standalone::pkgs_install
-
- * diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/25 dam's <damien@mandrakesoft.com>
-
- * install2.pm, steps.pm: icon correction
-
-2001/08/25 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount): accept mounting iso9660 filesystem as it should be
- (write_fstab): enable mounting more than one swap :)
-
- * bootlook.pm: fix deprecated call standalone::pkgs_install
-
- * install_steps.pm: added the missing security parameter to
- set_default_options
-
- * diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/24 dam's <damien@mandrakesoft.com>
-
- * pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_3b+.xpm, pixmaps/mouse_3b.xpm,
- pixmaps/mouse_3b+_mini.xpm: mini pixmaps, and lower color res for normal
- pix
-
- * standalone/mousedrake: updated mouse test
-
-2001/08/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
- uncompressing of ramdisk will rulz now
-
- * mdk-stage1/network.c: allow unsetting of automatic mode if not enough
- parameter provided in network steps
-
- * mdk-stage1/probing.c:
- - descr of proc files
- - fix small typo (segfault or not segfault? that's the question)
- enable install from Compaq Smart Array
-
- * mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
- than gcc statically
-
- * mdk-stage1/tools.c, mdk-stage1/mount.c: enable install from Compaq Smart
- Array
-
-2001/08/24 Pixel <pixel@mandrakesoft.com>
-
- * tools/pcmcia_config.patch: update the patch
-
- * Makefile (test_pms): make perl_checker skip help.pm
- ensure no .orig are generated when the pcmcia patch is applied
-
- * tools/make_mdkinst_stage2: give a little more free space (esp. for
- russian lang)
-
- * lang.pm, share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
- * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: auto-generates
- help.pm from xml doc done by doc team
-
-2001/08/24 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm: bugfix, speedtouch help
-
- * standalone/mousedrake: updated mouse test
-
-2001/08/24 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fixed possible bug (not sorted partition when calling
- mount_part).
-
- * install_any.pm: fixed hdInstallPath for an hd installation without
- usingRamdisk (not installing
- urpmi in such case).
- updated packages to copy for printerdrake, removed almost obsoletes
- XFree86
- 3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
- 3DLabs)
- which means user will have to change CD back to CD#1 if he a such a
- card.
- removed obsolete code for cond_remount and cond_umount and update
- hdInstallPath
- for hd installation.
-
- * diskdrake_interactive.pm: fixed typo common::usingRamdisk() instead of
- common::useRamdisk().
- take care mount point action is available for the hd installation
- partition only
- if a ramdisk is used (as it can be unmounted).
- use more global isMagicPart instead of isInstallHdPart.
- added real_mntpoint documentation and take care of hd install partition
- for
- available actions.
-
- * fs.pm: take care of using ram disk to remap mntpoint of hd installation
- partition.
- fixed partition never seen as mounted, added special case for
- real_mntpoint to
- remount magic partition on the right place.
-
-2001/08/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
- uncompressing of ramdisk will rulz now
-
- * mdk-stage1/automatic.c: revert my auto->interactive patch
-
- * mdk-stage1/network.c: allow unsetting of automatic mode if not enough
- parameter provided in network steps
-
- * mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
- than gcc statically
-
- * mdk-stage1/tools.c, mdk-stage1/mount.c, mdk-stage1/probing.c: enable
- install from Compaq Smart Array
-
-2001/08/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/locales-skeleton.tar.bz2, share/fonts.tar.bz2, keyboard.pm:
- enabling euro and utf-8 for some languages; added unicode font
-
-2001/08/24 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: remove the cond_umount_hdimage and
- cond_remount_hdimage
-
- * tools/pcmcia_config.patch: update the patch
-
- * lang.pm: no need for UTF-8/LC_CTYPE
- (load_mo): if not usingRamdisk, don't try getFile
-
- * diskdrake_interactive.pm: remove the cond_umount_hdimage and
- cond_remount_hdimage
- (Done): do not write fstab nor ask about it in install
-
- * fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
- * Makefile: ensure no .orig are generated when the pcmcia patch is applied
-
- * partition_table.pm (write): do not die when real_mntpoint fs fail to
- unmount/remount, just log
- (write): unmount+remount real_mntpoint before doing the kernel_read
-
- * share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
- * pkgs.pm: fix "invalid file"
-
-2001/08/24 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: speedtouch configuration
-
- * my_gtk.pm: gtk_create_xpm handles no absolute xpm path
-
- * pixmaps/mouse_3b+.xpm, pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.xpm:
- added new mouse pixmap for mousedrake
-
- * network/adsl.pm: bugfix, speedtouch help
- added aliases for speedtouch stuff
- speedtouch configuration
- removed adsl detectioin, once again.
-
- * standalone/mousedrake: no absolute pixmap reference
- new mousedrake. experimental
-
- * network/tools.pm: speedtouch configuration
- export write_initscript, correct initscript.
-
-2001/08/24 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fixed possible bug (not sorted partition when calling
- mount_part).
-
- * diskdrake_interactive.pm: take care mount point action is available for
- the hd installation partition only
- if a ramdisk is used (as it can be unmounted).
- use more global isMagicPart instead of isInstallHdPart.
- added real_mntpoint documentation and take care of hd install partition
- for
- available actions.
-
- * install_any.pm: fixed hdInstallPath for an hd installation without
- usingRamdisk (not installing
- urpmi in such case).
- updated packages to copy for printerdrake, removed almost obsoletes
- XFree86
- 3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
- 3DLabs)
- which means user will have to change CD back to CD#1 if he a such a
- card.
- removed obsolete code for cond_remount and cond_umount and update
- hdInstallPath
- for hd installation.
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
- mdk-stage1/init-data/msgboot.img.bz2: updated with latest 8.1 pictures
- and updated documentation.
-
- * fs.pm: take care of using ram disk to remap mntpoint of hd installation
- partition.
- fixed partition never seen as mounted, added special case for
- real_mntpoint to
- remount magic partition on the right place.
-
-2001/08/24 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (write): do not die when real_mntpoint fs fail to
- unmount/remount, just log
- (write): unmount+remount real_mntpoint before doing the kernel_read
-
- * install_steps.pm: remove the cond_umount_hdimage and
- cond_remount_hdimage
-
- * diskdrake_interactive.pm: remove the cond_umount_hdimage and
- cond_remount_hdimage
- (Done): do not write fstab nor ask about it in install
-
- * lang.pm (load_mo): if not usingRamdisk, don't try getFile
-
- * fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-2001/08/24 siegel
-
- * share/po/de.po: New & shiny german version
-
-2001/08/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
- * share/po/el.po: updated Greek file
-
-2001/08/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
-2001/08/23 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: at_boot connection,resolvconf in profiles
-
- * standalone/draksec: addedlibsafe option
-
- * network/adsl.pm: restart network after having tested adsl. experimental
-
-2001/08/23 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: removed unusefull greping when building package
- tree.
-
-2001/08/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: work on GAMES section
-
-2001/08/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/lv.po: updated Latvian file
-
-2001/08/23 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (cond_umount_hdimage): do not unmount /tmp/hdimage if not
- using ramdisk
- (disable_user_view): damned kdmrc moved
-
- * diskdrake_interactive.pm: cancel at startup will now exit
- ask wether to save fstab
- (part_possible_actions): have "Mount point" first to please fpons
-
- * fs.pm: keep the freq&passno of /etc/fstab
-
- * tools/i386/netboot/menu.lst.example,
- tools/i386/netboot/make_boot_network,
- tools/i386/netboot/automatic.para.default: as we now have
- menu.lst.example, i remove automatic.para for more flexibility
-
- * lang.pm: fix locale support when usingRamdisk
-
-2001/08/22 anoncvs
-
- * share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
- <dxiaoming@mandrakesoft.com>
- Updated chinese (simplied) translation.
-
-2001/08/22 Pixel <pixel@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
- * network/nfs.pm: pleac perl_checker
-
- * interactive_gtk.pm: more intelligent setting back the selected value in
- the clist and ctree
- (done already for entry)
- - fix entries editing causing the cursor to go to the end of line
- - select the text
-
- * c/stuff.xs.pm, install_steps.pm, pkgs.pm: do init_db inside pkg_inside
- otherwise LOG is closed and rpmlib tries to write in it and ...
-
-2001/08/22 anoncvs
-
- * share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
- <dxiaoming@mandrakesoft.com>
- Updated chinese (simplied) translation.
-
-2001/08/22 fabman
-
- * share/po/es.po: updated spanish .po files for DrakX and drakbootdisk
-
-2001/08/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
- entries are not given
-
- * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
- mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
- mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
- but ramdisk Read Only
-
-2001/08/22 Pixel <pixel@mandrakesoft.com>
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
- * bootlook.pm: fix typo
-
- * network/nfs.pm: pleac perl_checker
-
- * install_steps.pm: do init_db inside pkg_inside otherwise LOG is closed
- and rpmlib tries to write in it and ...
- do not call configurePrinter if no printer is wanted
-
- * interactive_gtk.pm: more intelligent setting back the selected value in
- the clist and ctree
- (done already for entry)
- - fix entries editing causing the cursor to go to the end of line
- - select the text
-
- * c/stuff.xs.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is
- closed and rpmlib tries to write in it and ...
-
-2001/08/22 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: fixed int and float checking which should accept
- negative number (added explicit
- positive too), cleaned code for some perl idioms.
-
- * install_steps.pm: updated configurePrinter to use foomatic printer
- configuration.
-
-2001/08/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
- entries are not given
-
- * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
- mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
- mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
- but ramdisk Read Only
-
-2001/08/22 kjx
-
- * share/po/zh_CN.GB2312.po: review
- review
-
-2001/08/22 Pixel <pixel@mandrakesoft.com>
-
- * bootlook.pm: fix typo
-
- * install_steps_auto_install.pm: don't have formatPartitions interactive
- by default
-
- * install_steps.pm: do not call configurePrinter if no printer is wanted
-
-2001/08/22 siegel
-
- * share/po/de.po: new german version
-
-2001/08/21 dam's <damien@mandrakesoft.com>
-
- * Makefile: added rpcinfo to the tar
- corrected bad Makefile : rpcinfo-flushed.c comes from tools.
-
- * standalone/draknet: ergonomy correction
-
- * network/tools.pm: corrected qq bug
- corrected bug
-
- * standalone/net_monitor: log updatede
- removed memoty leak
- time connection label
-
-2001/08/21 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: moved installation code of foomatic (only)
- if a printer may be chosen.
-
- * install_any.pm: fixed hd installation for urpmi.
-
- * printerdrake.pm: slight rewrite of some perl idioms.
-
-2001/08/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po: updated Walloon file
- updated pot file
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2001/08/21 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: add telnet-client-krb5 and ftp-client-krb5
-
- * install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
- install
-
- * Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
- * fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-
- * install_any.pm: cleanup
-
- * install_steps_interactive.pm: fix '$' in i18n message
-
-2001/08/21 siegel
-
- * share/po/de.po: new german version
-
-2001/08/21 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: removed memoty leak
- time connection label
-
- * network/tools.pm, network/modem.pm, network/netconnect.pm,
- network/ethernet.pm, network/isdn.pm: generik internet initscript, planq
- the children again
-
- * network/adsl.pm: speedtouch config
- generik internet initscript, planq the children again
-
-2001/08/21 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed hd installation for urpmi.
-
-2001/08/21 kjx
-
- * share/po/zh_CN.GB2312.po: review
-
-2001/08/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/21 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: fix spelling error
-
- * install_any.pm: cleanup
- install hotplug if usb (i kept usbd just in case)
-
- * diskdrake_interactive.pm (Create): force no sorting on filesystems,
- editable mount points
-
- * install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
- install
-
- * Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
- * install_steps_interactive.pm: fix '$' in i18n message
-
- * fs.pm (read_fstab): don't expand symlink if the link goes in a directory
- umask=0 only if security level < 3
-
-2001/08/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
- nowhere)
-
-2001/08/20 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: basic nfs handling in drakx
- fix bug 4257
-
- * detect_devices.pm (raidAutoStart): fix for when kmod is there
-
- * fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
- with devfs
-
- * diskdrake_interactive.pm, install_any.pm, install_steps.pm: try harder
- to umount /tmp/hdimage only when needed
-
- * Makefile.drakxtools, Makefile, tools/rpcinfo-flushed.c, network/nfs.pm,
- tools/.cvsignore, tools/Makefile, diskdrake.pm: basic nfs handling in
- drakx
-
-2001/08/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
- nowhere)
-
-2001/08/20 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: add weird options for NeoMagic NM2160 (request
- of Alex Hulse <axh0@aber.ac.uk> on cooker)
-
- * detect_devices.pm (raidAutoStart): fix for when kmod is there
-
- * diskdrake.pm: remove test code
-
- * fs.pm: fix bug 4257
-
- * fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
- with devfs
-
- * install_steps.pm, diskdrake_interactive.pm, install_any.pm: try harder
- to umount /tmp/hdimage only when needed
-
- * interactive_gtk.pm (wait_message_nextW): fix previous text == new text
- causing no
- expose_event causing dead loop
-
-2001/08/19 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake_interactive.pm: save fstab on exit
-
- * fsedit.pm: various typos fix
-
- * install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
- make the devfs= mount or nomount choice based on raid-based root work
-
- * standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
- fix diskdrake requiring gtk
- add some test code
-
- * fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
- removed unless we're in ramdisk
- various typos fix
-
- * install_steps_interactive.pm, common.pm, install2.pm, install_any.pm,
- lang.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
-
-2001/08/19 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: major fs.pm rework + adaptation to it
- don't show nfs/smb/removable in install
- basic smb handling
-
- * network/smb.pm: basic smb handling
-
- * install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
- make the devfs= mount or nomount choice based on raid-based root work
- disable supermount for the moment
- major fs.pm rework + adaptation to it
-
- * install_steps_interactive.pm, lang.pm: rename isCdNotEjectable in
- usingRamdisk, ensure no files are removed unless we're in ramdisk
- simplify
-
- * standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
- files are removed unless we're in ramdisk
- fix diskdrake requiring gtk
- add some test code
- major fs.pm rework + adaptation to it
-
- * install_any.pm: rename isCdNotEjectable in usingRamdisk, ensure no files
- are removed unless we're in ramdisk
- major fs.pm rework + adaptation to it
-
- * partition_table.pm: remove JFS from @important_types (too broken for the
- moment)
- remove isSupermount (was unused)
-
- * common.pm, install2.pm, pkgs.pm: rename isCdNotEjectable in
- usingRamdisk, ensure no files are removed unless we're in ramdisk
-
- * interactive_gtk.pm (create_ctree): fix focusing (the assumption number
- of leaves = number of lines is dumb)
-
- * fsedit.pm: various typos fix
- major fs.pm rework + adaptation to it
-
- * bootlook.pm, standalone/drakboot: major fs.pm rework + adaptation to it
-
- * fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
- removed unless we're in ramdisk
- various typos fix
- major fs.pm rework + adaptation to it
- cleanup
- basic smb handling
-
- * diskdrake_interactive.pm: save fstab on exit
- major fs.pm rework + adaptation to it
-
-2001/08/18 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm: basic nfs/smb handling in diskdrake
- fixes and function prototype removing
-
- * diskdrake.pm: basic nfs/smb handling in diskdrake
- nicer mount options code (for autofs and supermount)
-
- * install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-
- * interactive_gtk.pm: fix bug in box's height use
-
- * partition_table.pm, any.pm: fixes and function prototype removing
-
- * interactive.pm: readd the sorting based on size when no sorting is
- precised
-
- * my_gtk.pm (n_line_size): bigger spacing for 'various'
-
- * standalone/diskdrake, diskdrake_interactive.pm, fsedit.pm: basic nfs/smb
- handling in diskdrake
-
-2001/08/18 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm (n_line_size): bigger spacing for 'various'
- enhance look, fix ask_fileW
-
- * fs.pm: basic nfs/smb handling in diskdrake
- fixes and function prototype removing
- (write_fstab): add notail for reiserfs partitions in any case
- cleanup mounting options parsing
-
- * diskdrake.pm: basic nfs/smb handling in diskdrake
- nicer mount options code (for autofs and supermount)
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
- cleanup mounting options parsing
-
- * raid.pm: update the raid size as it should be
-
- * diskdrake_interactive.pm: basic nfs/smb handling in diskdrake
- less verbose resize_reiserfs
- update the raid size as it should be
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
-
- * fsedit.pm: basic nfs/smb handling in diskdrake
- update the raid size as it should be
-
- * network/tools.pm: fix typo
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
-
- * partition_table.pm: fixes and function prototype removing
-
- * install_steps_interactive.pm, standalone/drakautoinst, proxy.pm,
- install_interactive.pm, network/ethernet.pm, interactive_http.pm,
- printerdrake.pm, Xconfigurator.pm, network/netconnect.pm,
- network/network.pm, interactive_newt.pm, network/modem.pm: big renaming
- of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered
- in ask_from_
-
- * standalone/diskdrake: basic nfs/smb handling in diskdrake
-
- * any.pm: fixes and function prototype removing
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
-
- * interactive_gtk.pm: fix bug in box's height use
- better radiobox keyboard handling
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
- enhance look, fix ask_fileW
-
- * interactive.pm: readd the sorting based on size when no sorting is
- precised
- big renaming of ask_from_entries_refH in ask_from and
- ask_from_entries_refH_powered in ask_from_
-
- * install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
- do not use devfs with root software raid
-
-2001/08/18 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: fix pass $all_hds->{hds} instead of
- $all_hds
-
-2001/08/18 siegel
-
- * share/po/de.po: new german version
-
- * standalone/drakgw, bootlook.pm, network/ethernet.pm, install_any.pm,
- network/network.pm, raid.pm: fixed i18n
-
- * printerdrake.pm: i18n fixes
-
-2001/08/17 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm: use diskdrake_interactive instead of diskdrake
-
- * standalone/interactive_http/interactive_http.cgi: fix typo
- restrict the progs callable to a few one.
-
- * standalone/interactive_http/index.html.pl,
- standalone/interactive_http/index.html: autogenerate index.html
-
- * fs.pm, diskdrake_interactive.pm, diskdrake.pm: add mount options choice
- (with IA-like stripping of unused options)
-
- * c/stuff.xs.pm: is_ext3 is needed in standalone
- Xtest not needed in standalone
-
- * c/Makefile.PL: is_ext3 is needed in standalone
-
- * standalone/interactive_http/miniserv.init,
- standalone/interactive_http/Makefile: restrict the progs callable to a
- few one.
-
- * Makefile.drakxtools: fix po not build, add interactive_http in DIRS
-
- * modules.pm: move back sunhme in sparc only
-
-2001/08/17 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: no scrollbar if list <= 10 and the list is alone
-
- * interactive.pm, install2.pm: removed no_incon
-
- * standalone/net_monitor: added no internet connection configured label on
- button
-
- * network/netconnect.pm, network/ethernet.pm: corrected connection script
- creation
-
-2001/08/17 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm: use diskdrake_interactive instead of diskdrake
- a hell lot of cleanup/rewrite:
- * diskdrake_interactive created, diskdrake is now interactive aware
- * added some documentation about the structure used for partitioning
- * all_hds now contain the various hds, lvm, raid
- * cleanup the isLVM, isRAID and alike functions
- * field {type} in detect_devices is now {media_type}
- * detect_devices::floppies is now floppies_dev
- * removed old function prototypes
-
- * fs.pm, diskdrake.pm: add mount options choice (with IA-like stripping of
- unused options)
- a hell lot of cleanup/rewrite:
- * diskdrake_interactive created, diskdrake is now interactive aware
- * added some documentation about the structure used for partitioning
- * all_hds now contain the various hds, lvm, raid
- * cleanup the isLVM, isRAID and alike functions
- * field {type} in detect_devices is now {media_type}
- * detect_devices::floppies is now floppies_dev
- * removed old function prototypes
-
- * install_steps_interactive.pm, install_steps_auto_install.pm,
- install2.pm, partition_table.pm, loopback.pm, raid.pm, bootlook.pm,
- standalone/diskdrake, install_any.pm, install_steps.pm, fsedit.pm,
- any.pm, detect_devices.pm, partition_table_raw.pm, bootloader.pm: a hell
- lot of cleanup/rewrite:
- * diskdrake_interactive created, diskdrake is now interactive aware
- * added some documentation about the structure used for partitioning
- * all_hds now contain the various hds, lvm, raid
- * cleanup the isLVM, isRAID and alike functions
- * field {type} in detect_devices is now {media_type}
- * detect_devices::floppies is now floppies_dev
- * removed old function prototypes
-
- * diskdrake_interactive.pm: add mount options choice (with IA-like
- stripping of unused options)
- (part_possible_actions): have possible actions sorted the way we want
- (Type): fix ext2->ext3 detection
- a hell lot of cleanup/rewrite:
- * diskdrake_interactive created, diskdrake is now interactive aware
- * added some documentation about the structure used for partitioning
- * all_hds now contain the various hds, lvm, raid
- * cleanup the isLVM, isRAID and alike functions
- * field {type} in detect_devices is now {media_type}
- * detect_devices::floppies is now floppies_dev
- * removed old function prototypes
-
- * modules.pm: move back sunhme in sparc only
-
-2001/08/17 Till Kamppeter <till@mandrakesoft.com>
-
- * share/rpmsrate: Corrected listing of packages for printing in 'INSTALL'
- section.
-
-2001/08/17 warly
-
- * share/rpmsrate: add package needed by the install in INSTALL
- remove shapecfg and gpa
-
-2001/08/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed bug of CUPS not being installed during
- installation
-
-2001/08/16 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm, install_any.pm: add remove_unused to have more place for mo
- files
-
-2001/08/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed bug of CUPS not being installed during
- installation
-
-2001/08/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: add remove_unused to have more place for mo files
- (getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the
- unmounting at end of install to fail
-
- * install2.pm: add remove_unused to have more place for mo files
-
-2001/08/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16 warly
-
- * share/rpmsrate: add package needed by the install in INSTALL
-
-2001/08/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po: updated French file
-
- * share/po/sk.po: updated Slovak file
-
- * lang.pm: Added explicit setting of XFree86 internal XIM for Thai
-
-2001/08/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (getAndSaveAutoInstallFloppy): fix a missing del_loop
- which caused the
- unmounting at end of install to fail
-
-2001/08/16 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16 warly
-
- * share/rpmsrate: add package needed by the install in INSTALL
- add kernel in INSTALL
- s/DrakConf/drakconf/
-
-2001/08/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/it.po, share/po/id.po: updated Indonesian,
- Italian and Korean files
-
- * share/po/sr.po, share/po/sp.po, share/po/tr.po: updated Turkish and
- Serbian files
-
-2001/08/15 Pixel <pixel@mandrakesoft.com>
-
- * standalone/diskdrake: oops reverting modifs commited by error
- fix XkbOptions handling
-
- * standalone/keyboarddrake: fix XkbOptions handling
-
-2001/08/15 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: Let the "Options" button only appear when
- the queue is Foomatic or with PPD (CUPS)
-
-2001/08/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po, share/po/it.po: updated Indonesian, Italian and Korean
- files
-
- * share/po/es.po: updated spanish and Indonesian files
-
- * share/po/id.po: updated Indonesian, Italian and Korean files
- updated spanish and Indonesian files
-
-2001/08/14 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: added options
-
-2001/08/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: oops, fix type of installing X or not
- - fix choice of packages when auto install
-
- * Makefile.config: add drakautoinst in drakxtools standalone binaries
-
- * install_steps_interactive.pm, install2.pm:
- - fix createBootdisk with auto
- - fix setupBootloader with auto
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * install_steps.pm, network/netconnect.pm:
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * Xconfigurator.pm: fix automatic configuration
-
-2001/08/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po: updated Swedish file
-
-2001/08/14 Pixel <pixel@mandrakesoft.com>
-
- * devices.pm: add number-only device-name handling (eg: "801" is "sda1")
-
- * interactive_gtk.pm, interactive.pm:
- - small fixes (esp. gtk sensitive handling)
- - add ask_file
- - add "gtk" preference field
-
- * my_gtk.pm: remove ask_file (was unused)
-
- * http.pm: cleanup to please perl_checker
-
- * Makefile (TAGS): add MDK/Common files
-
- * services.pm: cleanup (it was working, but wasn't nice)
-
-2001/08/14 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corrected activation button
-
-2001/08/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: oops, fix type of installing X or not
- - fix choice of packages when auto install
-
- * Makefile.config: add drakautoinst in drakxtools standalone binaries
-
- * install_steps_interactive.pm, install2.pm:
- - fix createBootdisk with auto
- - fix setupBootloader with auto
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * install_steps.pm, network/netconnect.pm:
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * Xconfigurator.pm: fix automatic configuration
-
-2001/08/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po: updated Swedish file
-
-2001/08/14 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: fix typo?
-
-2001/08/14 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Transfer queues non-interactively when switching
- between LPD and LPRng.
-
-2001/08/14 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corrected activation button
-
-2001/08/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm, install2.pm,
- network/netconnect.pm:
- - fix behaviour of draknet when auto-install
- - remove auto flag when error-in-step
-
- * Xconfigurator.pm: fix automatic configuration
-
- * install_any.pm:
- - fix choice of packages when auto install
-
-2001/08/14 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: fix typo?
-
-2001/08/14 Till Kamppeter <till@mandrakesoft.com>
-
- * printer.pm: Removed superfluous lines.
-
- * printerdrake.pm: Transfer queues non-interactively when switching
- between LPD and LPRng.
- Wait message for queue transfer, manufacturer name bugfix
-
-2001/08/13 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * tools/i386/netboot/stage2.eepro100: Add eepro100 grub stage.
- Removing old version of eepro100 (no stage1).
-
- * tools/i386/netboot/stage1.eepro100: Add eepro100 grub stage.
-
-2001/08/13 dam's <damien@mandrakesoft.com>
-
- * interactive.pm: corrected 'no icon'
-
- * network/adsl.pm, network/netconnect.pm: adsl autodetection activated
- (planq the children)
-
-2001/08/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakautoinst: ouch! use lib from /usr/lib/libDrakX, rather
- than from ..
- initial revision for drakautoinst
- - put %installSteps in a separate package (steps.pm) (for drakxtools)
- - use additional fields {auto} and {noauto}, by step, to ease
- interactive auto install and oem stuff
- - in install2.pm, perform each step either from the interactive class
- or from install_steps, according to the {auto} flag
- - id, tell each step to not try to be automatic if {noauto}
- - in the install, have auto install bootdisk created in install_any so
- we can always write a bootdisk (from install_steps) for further use from
- drakautoinst in standalone
- - interactive version of install_steps_auto_install is now inheriting
- from the interactive class, so we can click on a previous automatic step
- and have it interactively during an interactive auto install
-
- * install_steps.pm, install_steps_interactive.pm,
- install_steps_auto_install.pm, install2.pm, steps.pm, install_any.pm:
- initial revision for drakautoinst
- - put %installSteps in a separate package (steps.pm) (for drakxtools)
- - use additional fields {auto} and {noauto}, by step, to ease
- interactive auto install and oem stuff
- - in install2.pm, perform each step either from the interactive class
- or from install_steps, according to the {auto} flag
- - id, tell each step to not try to be automatic if {noauto}
- - in the install, have auto install bootdisk created in install_any so
- we can always write a bootdisk (from install_steps) for further use from
- drakautoinst in standalone
- - interactive version of install_steps_auto_install is now inheriting
- from the interactive class, so we can click on a previous automatic step
- and have it interactively during an interactive auto install
-
-2001/08/13 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm, install2.pm, install_any.pm, steps.pm:
- auto_inst enhancements
-
- * install_steps_interactive.pm, standalone/XFdrake, install_steps.pm,
- Xconfigurator.pm: really use a class_discard for Xconfigurator::main
-
- * devices.pm: add /dev/hd[mt] handling
-
-2001/08/13 siegel
-
- * share/po/de.po: new german version
-
-2001/08/13 Till Kamppeter <till@mandrakesoft.com>
-
- * printerdrake.pm: Automatic transfer of queues when changing the spooler.
- Update printer queue list when exiting during install, so that the
- "Summary" entry is correct.
- When one sayd "No" on the test page, the modify dialog was not pointing
- to the current printer
-
- * printer.pm: Automatic transfer of queues when changing the spooler.
- The photo test page was not printed during installation.
-
- * interactive.pm: Tree lists are sorted again now.
-
-2001/08/13 yduret
-
- * standalone/drakxconf: removed diskdrake from the choice
-
-2001/08/12 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: longer timeout
-
-2001/08/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix ortograf typo
-
-2001/08/12 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile: po->mo is no longer gonna be nasty with us
-
- * interactive_gtk.pm: clean the nice till fix
-
- * tools/cvslog2changelog.pl: add till
-
- * Makefile: ensure locales.tar.bz2 in perl-install/share is build
- po->mo is no longer gonna be nasty with us
-
-2001/08/12 Till Kamppeter <till@mandrakesoft.com>
-
- * interactive.pm: Lists get only sorted when the "sort" option is given.
-
- * printer.pm, printerdrake.pm: Check files before checking RPM database =>
- Acceleration, waiting windows
-
-2001/08/11 dam's <damien@mandrakesoft.com>
-
- * share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
- share/themes/mdk-bg.png: new theme for beta
-
- * share/theme-editor.pl: updated
- now works.
-
-2001/08/11 tkamppeter
-
- * printer.pm, printerdrake.pm: Restructuring continued and debugged
-
-2001/08/10 dam's <damien@mandrakesoft.com>
-
- * share/theme-editor.pl: added theme editor
-
- * network/tools.pm: corrected password file substitution
-
- * network/ethernet.pm: remove Data::Dumper
-
- * network/netconnect.pm: added spped and timeout handling for isdn
-
- * any.pm: corrected autologin question
-
- * network/isdn.pm: tomeout option deactivated.
-
- * standalone/draknet: corrected internet cnfiguration pop up, and some
- other studds
- ifup/down ethx, anew pixmap for list
-
- * my_gtk.pm: removed Datta::Dump use
-
- * pixmaps/eth_card_mini2.png: added
-
-2001/08/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: small font fix
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * share/po/bg.po: updated Bulgarian file
- updated pot file
-
-2001/08/10 yduret
-
- * bootlook.pm: corrected vnew usage (thx gc)
-
-2001/08/09 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: added missing use
- added pixmap for eth. Some factorisation
-
- * network/tools.pm: added useless function type2interface for future use
-
- * my_gtk.pm: added gtkbuttonset, and corrected scrollbar height for
- standalone mode.
-
- * network/isdn.pm: labels corrections
-
-2001/08/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/tinyfirewall, standalone/printerdrake, standalone/mousedrake,
- standalone/drakxservices, standalone/net_monitor, standalone/draknet,
- standalone/drakproxy, standalone/XFdrake, standalone/keyboarddrake,
- standalone/drakxconf, standalone/adduserdrake, standalone/livedrake,
- standalone/drakboot, standalone/draksec: use vnew the right way
- everywhere
-
- * standalone/drakgw: use vnew the right way everywhere
- - if package installs fail, redo one by one to know which one failed
- - try to not end up with a failing configuration file, if program is
- brutally stopped
- - if unrecognized config file, don't fail, rather ignore it and
- proceed
- - run dhcpd_update feature (if present) after setup of dhcp server
-
- * share/rpmsrate: put traceroute in network client also, for claudio
-
-2001/08/09 Pixel <pixel@mandrakesoft.com>
-
- * standalone.pm, install_any.pm: rename interactive_pkgs in
- pkgs_interactive
-
-2001/08/09 siegel
-
- * standalone/interactive_http/miniserv.logrotate,
- standalone/interactive_http/Makefile: Added logrotate for
- "/var/log/drakxtools_http.log"
-
-2001/08/09 tkamppeter
-
- * printer.pm, printerdrake.pm: New structure for queue modification,
- general structure clean-up
-
-2001/08/09 yduret
-
- * bootlook.pm: readded in->do_pkg->install (i sux)
- rewrite in a more drakx fashion
-
- * my_gtk.pm: added gtkset_sensitive in wrapper..
-
-2001/08/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/08 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: typo
- makes interactive_pkgs stuff work
- add interactive_pkgs stuff
-
- * Makefile: skip module CGI in test_pms (perl_checker)
-
- * fsedit.pm (check_mntpoint): remove /root from directories that "should
- remain within the root filesystem"
-
- * proxy.pm, network/ethernet.pm, network/isdn.pm, tinyfirewall.pm,
- printerdrake.pm, standalone/drakgw, standalone/draknet,
- network/tools.pm, bootlook.pm, standalone.pm, standalone/drakproxy,
- standalone/XFdrake, network/netconnect.pm, standalone/adduserdrake,
- network/adsl.pm, network/network.pm, printer.pm, network/modem.pm: add
- interactive_pkgs stuff
-
- * install_steps_interactive.pm: installing foomatic before doing anything
- about printer
- add interactive_pkgs stuff
-
- * Xconfigurator.pm, any.pm: makes interactive_pkgs stuff work
- add interactive_pkgs stuff
-
- * install_any.pm (remove, remove_nodeps): fix typo
- makes interactive_pkgs stuff work
- add interactive_pkgs stuff
-
-2001/08/08 tkamppeter
-
- * install_steps_interactive.pm: Installation fitted to new printerdrake
-
- * printer.pm: Different choosable test pages available now
- Corrected init script calls in the (start|stop|restart)_service
- functions
-
- * printerdrake.pm: Different choosable test pages available now
- Removed superfluous line in install_spooler function
-
-2001/08/08 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (naughtyServers): add drakxtools-http
-
-2001/08/07 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: nex features
-
- * network/netconnect.pm: removed debugging message
-
- * network/isdn.pm: corrected pkgs use -> require
-
- * my_gtk.pm: added gtkset_relief
-
- * pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07 Pixel <pixel@mandrakesoft.com>
-
- * pixmaps/network.png, pixmaps/draknet_step.png: re-adding with -kb
- removing for re-adding with -kb
-
-2001/08/07 tkamppeter
-
- * printer.pm, printerdrake.pm: Automatic installation of all needed
- packages
-
-2001/08/07 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corrected label
-
- * network/netconnect.pm: removed debugging message
-
- * standalone/net_monitor: nex features
- added color choice
- lot of improvments
-
- * network/isdn.pm: corrected pkgs use -> require
-
- * my_gtk.pm: added gtkset_relief
-
- * pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c: say that it's a data read error, when we can't load
- the ramdisk
-
- * mdk-stage1/Makefile.common, mdk-stage1/bzlib/bzlib.h: don't use system
- wide bzlib.h but our own provided one
-
-2001/08/07 Pixel <pixel@mandrakesoft.com>
-
- * rescue/tree/etc/issue: fix distrib number
-
- * interactive.pm: adding http feature, mainly for standalone tools
-
- * standalone/miniserv.pem, standalone/miniserv.pl: Initial revision
- import
-
- * standalone/interactive_http/miniserv.pl: add interactive_http
- Initial revision
-
- * resize_fat/main.pm: fix
-
- * partition_table.pm: nicer names for journalised fs
-
- * Makefile.drakxtools, standalone/interactive_http/miniserv.init,
- standalone/interactive_http/index.html,
- standalone/interactive_http/interactive_http.cgi,
- standalone/interactive_http/miniserv.conf,
- standalone/interactive_http/miniserv.pam,
- standalone/interactive_http/miniserv.users, Makefile,
- standalone/interactive_http/Makefile: add interactive_http
-
- * interactive_http.pm, standalone/interactive_http.cgi: add
- interactive_http
- adding http feature, mainly for standalone tools
-
- * share/diskdrake.rc: have every journalised in darkred
-
- * c/stuff.xs.pm: add S_IFIFO
-
- * standalone/interactive_http/miniserv.pem: Initial revision
-
-2001/08/06 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: debugging, profile coding, isdn 128 debugging
- corrected gtkradio : shift instead of pop
-
- * interactive_gtk.pm, install_steps_gtk.pm: corrected gtkradio : shift
- instead of pop
-
- * network/netconnect.pm, network/ethernet.pm, network/isdn.pm: debugging,
- profile coding, isdn 128 debugging
-
-2001/08/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/i386/busybox: try a busybox with better globbing under the SHELL
-
-2001/08/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/de.po: Updates to German file by Peer Dunker <peer46@gmx.net>
-
- * share/po/vi.po: updated Vietnamese file
-
-2001/08/06 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm: kernel_arch removed
-
- * fsedit.pm (@suggestions_mntpoints): remove /root (tx2gc)
-
- * interactive_gtk.pm, interactive_newt.pm: cleanup, functions already
- defined in interactive
-
-2001/08/06 yduret
-
- * tinyfirewall.pm: use MDK::Common;
- use network::netconnect;
-
- * standalone/drakgw: use MDK::Common;
- use network::netconnect; and update functions call from netconnect
-
-2001/08/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eo.po: updated Esperanto file
-
-2001/08/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm: switch to gtk install when
- interactiveSteps is defined
-
-2001/08/05 tkamppeter
-
- * printer.pm, printerdrake.pm: Automatic installation and start of the
- desired printer spooler
-
-2001/08/04 Pixel <pixel@mandrakesoft.com>
-
- * share/list: add tune2fs enabling switching from ext2 to ext3
-
- * fs.pm, fsedit.pm, partition_table.pm: add ext3 support
-
- * diskdrake.pm: add ext3 support
- (Type): handle lossless switch from ext2 to ext3
-
- * pkgs.pm: make perl_checker happy
-
- * c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
- * common.pm: moved arch() and alike to MDK::Common::System
-
-2001/08/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (choosePackages): simplify, fix
- setSelectedFromCompssList not called in
- expert even the first_time (especially nasty for auto_installs)
-
- * fs.pm, partition_table.pm, fsedit.pm: add ext3 support
-
- * diskdrake.pm: add ext3 support
- (Type): handle lossless switch from ext2 to ext3
-
- * install_steps_gtk.pm: add the feather feature, but do not enable it
-
- * interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
- (wait_msg doesn't
- exist anywhere, it must be a fpons typo)
-
- * pkgs.pm: make perl_checker happy
-
- * c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
- * bootloader.pm: as when lilo is selected, we don't try to install grub,
- just create the
- config file in case it may be useful
-
- * common.pm: moved arch() and alike to MDK::Common::System
-
- * partition_table_raw.pm: add yaboot detection
-
- * install_any.pm, share/rpmsrate: create a new flags "X" selected by
- default, contain what X related packages
- which were in "SYSTEM"
-
-2001/08/04 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (choosePackages): simplify, fix
- setSelectedFromCompssList not called in
- expert even the first_time (especially nasty for auto_installs)
-
- * install_steps_gtk.pm: add the feather feature, but do not enable it
-
- * bootloader.pm: as when lilo is selected, we don't try to install grub,
- just create the
- config file in case it may be useful
-
- * interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
- (wait_msg doesn't
- exist anywhere, it must be a fpons typo)
-
- * share/rpmsrate, install_any.pm: create a new flags "X" selected by
- default, contain what X related packages
- which were in "SYSTEM"
-
-2001/08/03 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor, network/tools.pm, network/netconnect.pm,
- network/isdn.pm: debugging, 128Kb/s ISDN
-
- * Makefile.drakxtools, Makefile: added network pms
-
-2001/08/03 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm: typo fix
- replace isJfs/isXfs/... with isThisFs("jfs"
-
- * install_any.pm: replace isJfs/isXfs/... with isThisFs("jfs"
- update_userkderc is now called update_gnomekderc
-
- * Makefile: better po skipping
-
- * commands.pm (sync): (re-?)add
-
- * fs.pm, install_steps_interactive.pm, diskdrake.pm, bootloader.pm:
- replace isJfs/isXfs/... with isThisFs("jfs"
-
- * fsedit.pm (check_mntpoint): /root should remain within the root
- filesystem
-
- * install_steps.pm (choosePartitionsToFormat): toFormatUnsure=1 for /usr
- update_userkderc is now called update_gnomekderc
-
-2001/08/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/adsl.c:
- - fix problem of clashing user/pass between adsl and ftp/http in case
- of automatic installs
- - update doc on automatic install parameters (doc/TECH-INFOS)
-
- * mdk-stage1/doc/TECH-INFOS:
- - small update
- - fix problem of clashing user/pass between adsl and ftp/http in case
- of automatic installs
- - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
-2001/08/02 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm, services.pm, install_interactive.pm,
- network/netconnect.pm, install_any.pm, Xconfigurator.pm: instead of
- testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk
- is in ISA of the object
-
- * partition_table.pm, fsedit.pm, diskdrake.pm: JFS support
-
-2001/08/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/adsl.c:
- - fix problem of clashing user/pass between adsl and ftp/http in case
- of automatic installs
- - update doc on automatic install parameters (doc/TECH-INFOS)
-
- * mdk-stage1/doc/TECH-INFOS:
- - small update
- - fix problem of clashing user/pass between adsl and ftp/http in case
- of automatic installs
- - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
-2001/08/02 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: instead of testing if ref($in) or ref($o) contains
- /gtk/, test if interactive_gtk is in ISA of the object
- add jfs support
-
- * install_steps_interactive.pm, services.pm, install_interactive.pm,
- network/netconnect.pm, Xconfigurator.pm: instead of testing if ref($in)
- or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the
- object
-
- * partition_table.pm: JFS support
- add jfs support
-
- * fsedit.pm, diskdrake.pm: JFS support
-
- * tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
- * fs.pm, share/list: add jfs support
-
-2001/08/02 Pixel <pixel@mandrakesoft.com>
-
- * tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
- * fs.pm, share/list, partition_table.pm, install_any.pm: add jfs support
-
-2001/08/01 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: write_on_text writes in blue instead of black
-
- * network/isdn.pm: typo
- added de-installation before installateion
-
- * network/netconnect.pm: translation correction
-
-2001/08/01 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, fsedit.pm: handle auto_allocate_raids for
- auto_installs
-
- * raid.pm (new): now works with a list of partitions
-
-2001/08/01 tkamppeter
-
- * printer.pm: Fixed bug in recognizing the printer ID in the Foomatic
- overview.
-
-2001/08/01 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: write_on_text writes in blue instead of black
-
- * network/isdn.pm: typo
- added de-installation before installateion
-
- * network/netconnect.pm: translation correction
-
-2001/08/01 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, fsedit.pm: handle auto_allocate_raids for
- auto_installs
-
- * raid.pm (new): now works with a list of partitions
-
-2001/07/31 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: added splash screen between different
- configurations. Added splash wizard mode
- added intro step for each configuration type.
-
- * network/tools.pm: corrected ask_connect_now
-
- * my_gtk.pm: added write_on pixmap : a function to write text on pixma,
- using fonts.
-
- * network/ethernet.pm: added intro step for each configuration type.
-
-2001/07/31 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_steps_interactive.pm: after copying the auto install floppy,
- sync in case you shall remove the
- floppy right after the LED switches off yet the kernel decides to not
- flush
- everything
-
- * modules.pm, mdk-stage1/modules_descr.h: have "catc" driver for usbnet
- installs
-
- * bootloader.pm: load msdos and vfat before mkbootdisk (now using syslinux
- so..)
-
-2001/07/31 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (translate): empty string translation is an empty string
-
- * install_gtk.pm (test_mouse): s/my (.*) = 0 if 0/my $1 if 0/
-
- * share/rpmsrate: add cpio
- lower gurpmi (5->4)
-
- * share/gen_locales.sh, share/locales-skeleton.tar.bz2: chineese locale
- support
- better handling of locales
-
- * Makefile.drakxtools (install): s/cp -rf/cp -rfL/ (-L = --dereference,
- aka always follow symbolic links)
-
- * install_steps_gtk.pm (installPackages): make $show_advertising a global
- state (for Vincent Meyer)
-
- * share/Makefile, Makefile: better handling of locales
-
- * install_steps_auto_install.pm: remove bad prototype
-
-2001/07/30 dam's <damien@mandrakesoft.com>
-
- * network/ethernet.pm: added cable internet connection selection
- added internet connection selection in case of multiple configurations
-
- * network/netconnect.pm: corrected ask_connect_now behaviour
- corrected ask_connect_now
- debug
- added internet connection selection in case of multiple configurations
-
- * network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
- corrected ask_connect_now
- added internet connection selection in case of multiple configurations
-
-2001/07/30 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
- hdlist files"
- occurs when the hdlists are in fact not available
-
- * share/locales.tar.bz2.ppc, share/locales.tar.bz2,
- share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
- share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
- based on installed glibc
-
- * printer.pm, printerdrake.pm: use MDK::Common
- i wonder why it was included and Till used an older version without
- merging?
-
- * resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
- yet)
-
- * share/rpmsrate: raise rxvt (4->5)
- lower rpmdrake & harddrake (5->4)
- remove rootfiles (unneeded)
-
- * Makefile: use -excludeMDK::Common::Globals for perl_checker
- automatic handling of locales.tar.bz2 based on installed glibc
-
-2001/07/30 tkamppeter
-
- * printer.pm, printerdrake.pm: In beginners mode one chooses only the
- printer, not the driver (default driver)
-
-2001/07/30 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm: debug
- added internet connection selection in case of multiple configurations
-
- * network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
- added internet connection selection in case of multiple configurations
-
- * network/ethernet.pm: added cable internet connection selection
- added internet connection selection in case of multiple configurations
-
-2001/07/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/config-stage1.h:
- have a memory limit also for Rescue (different one)
-
-2001/07/30 Pixel <pixel@mandrakesoft.com>
-
- * printer.pm, printerdrake.pm: use MDK::Common
- i wonder why it was included and Till used an older version without
- merging?
-
- * resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
- yet)
-
- * share/rpmsrate: raise rxvt (4->5)
- lower rpmdrake & harddrake (5->4)
- remove rootfiles (unneeded)
-
- * pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
- hdlist files"
- occurs when the hdlists are in fact not available
-
- * Makefile: use -excludeMDK::Common::Globals for perl_checker
- automatic handling of locales.tar.bz2 based on installed glibc
-
- * share/locales.tar.bz2.ppc, share/locales.tar.bz2,
- share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
- share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
- based on installed glibc
-
-2001/07/28 tkamppeter
-
- * printer.pm, printerdrake.pm: Support for PPD files of PostScript
- printers (when CUPS is used)
-
-2001/07/27 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: fixed undeselectable group when 'Other' sub-tree
- is seen as a package.
-
- * interactive_gtk.pm: allow ask_browse_tree_info_refW to return 0 on
- cancel (previously always 1).
- added a before leaving code to clean added reference (else it seems to
- bahave
- strangely on changing steps).
- fixed wrong reference to added icons to ask_browse_tree_info_refW.
-
- * services.pm: allow cancel on services which do not change anything.
-
- * install_steps_interactive.pm: changed warn dialog to okcancel dialog
- when asking user to insert Boot floppy
- used or Update Modules floppy (die may cause to rerun install else).
-
-2001/07/27 gbeauchesne
-
- * install_steps_gtk.pm:
- - install_steps_gtk.pm (launchX) : create /var/log, if not existent,
- for
- XFree86.log
-
-2001/07/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: allow to escape from Update Modules if you don't
- want to insert an ext2 floppy
- Disk -> Floppy for Update Modules disk
-
-2001/07/27 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * share/locales.tar.bz2.ppc, keyboard.pm, help.pm, partition_table.pm,
- Xconfigurator.pm: last of sync with PPC beta mods
-
-2001/07/27 tkamppeter
-
- * standalone/printerdrake, printer.pm, printerdrake.pm: Printerdrake
- changed to use Foomatic, driver options, spooler change
-
-2001/07/26 dam's <damien@mandrakesoft.com>
-
- * network/isdn.pm: added firmware loading/configuration
- not loading the module at detection.
-
- * standalone/draknet: MDK::common correction
-
- * modules.pm: added default option id="HiSax" to isdn module
-
-2001/07/26 fcrozat
-
- * share/po/fr.po: Fix spelling of 'molette'
-
-2001/07/26 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: added blank and updatemodules options to DrakX.
-
- * bootloader.pm: added prioritary kernel entry 'default' as the kernel
- typically copied from a
- modified blank.img file with a kernel (no initrd.img necessary to
- build).
- This kernel takes precedance over any other kernel.
-
- * install_steps_interactive.pm: really fixes Diskette with Floppy.
- fix typo as Diskette to Floppy.
- add support for new modules load as described by GG.
-
- * install_steps.pm: fixed some silly typo and tiny bugs.
- fixed typo as Diskette to Floppy.
- add support for modified blank.img floppy and Update Modules floppy.
- In first case copy kernel to /boot/vmlinuz-default to be taken into
- account by
- bootloader suggestion method.
- In second case, check installed kernel and update any modules listed in
- the
- Update Modules floppy.
-
-2001/07/26 gbeauchesne
-
- * bootloader.pm:
- - Don't set "lba32" on ia64
-
-2001/07/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/modules.c: pass
- "--blank" to DrakX when module loading is disabled
- - add "changedisk" feature
- - add "updatemodules" feature
-
- * mdk-stage1/tools.c, mdk-stage1/doc/UPDATEMODULES, mdk-stage1/stage1.h:
- - add "changedisk" feature
- - add "updatemodules" feature
-
- * mdk-stage1/probing.c: silently load usb controllers
-
-2001/07/25 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: fixed new network organization
-
- * standalone/net_monitor: updated. Profile handling.
-
- * network/isdn_consts.pm: updated ISDN detection. Added firmware handling
- and drivers other than hisax
-
-2001/07/25 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed no test (or die test) to void package read on depslist
- (allowed to keep
- package indexing good on multi-arch).
- cleaned code to examine depslist.ordered and packages list.
-
- * rescue/make_rescue_img: fixed to use perl-MDK-Common.
-
- * tools/syncrpms: fixed still missing rpmtools:: before a version_compare
- ...
-
-2001/07/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules_descr.h: small typo
-
- * mdk-stage1/init.c, mdk-stage1/newt-frontend.c: Use Yahve quoting
-
-2001/07/25 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile (install): build mo's
-
- * commands: move to MDK::Common, bool->to_bool
-
- * common.pm: do not export sync, keep it in common (esp. so that it
- doesn't conflict with my_gtk::sync
- (removeXiBSuffix): add TB (tera)
-
- * share/po/i18n_compssUsers, rescue/make_rescue_img: use MDK::Common
-
- * share/verify_modules.pl: new common syntax
-
- * Makefile:
- - temporary hack to have at least good UTF-8 based locales (otherwise
- rpmlib segfaults)
- - touch share/po/*.po, so that they are not rebuilded (pablo takes
- care of them)
-
- * share/list: add MDK::Common::Globals
-
- * partition_table_sun.pm, install2.pm, partition_table.pm, commands.pm,
- install_steps.pm, partition_table_raw.pm, partition_table_mac.pm: do not
- export sync, keep it in common (esp. so that it doesn't conflict with
- my_gtk::sync
-
-2001/07/25 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mdk-stage1/modules_descr.h: add decriptions for integrated Apple
- Network/SCSI hardware
-
-2001/07/24 dam's <damien@mandrakesoft.com>
-
- * network/isdn_consts.pm, network/netconnect.pm, network/ethernet.pm:
- corrected speed fax + PCI, updated configuration
-
-2001/07/24 daouda
-
- * bootlook.pm: better runlevel handling -> persistent level choice
-
-2001/07/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/07/24 Pixel <pixel@mandrakesoft.com>
-
- * commands.pm: move to MDK::Common, bool->to_bool
- fix syntax
- removed/renamed unused/seldom-used functions
- generalize the use of chomp_ as the functional alternative to chomp (and
- works on lists)
-
- * swap.pm: temporary hack to have at least good UTF-8 based locales
- (otherwise rpmlib segfaults)
- move to MDK::Common, bool->to_bool
-
- * unused/scsi.pm, standalone/draknet: generalize the use of chomp_ as the
- functional alternative to chomp (and works on lists)
-
- * globals.pm, perl2fcalls:
- - globals is now MDK::Common::Globals
- - perl2fcalls is now /usr/bin/perl_checker
-
- * install_steps_gtk.pm: move to MDK::Common, bool->to_bool
- move to MDK::Common, bool->to_bool
- removed/renamed unused/seldom-used functions
-
- * common.pm: move to MDK::Common, bool->to_bool
- cleanup (remove unused stuff and dangerous prototypes)
- removed/renamed unused/seldom-used functions
- generalize the use of chomp_ as the functional alternative to chomp (and
- works on lists)
-
- * network/tools.pm, network/adsl.pm, network/netconnect.pm,
- network/ethernet.pm, network/isdn.pm, network/modem.pm:
- - globals is now MDK::Common::Globals
- - perl2fcalls is now /usr/bin/perl_checker
- move to MDK::Common, bool->to_bool
-
- * partition_table_dos.pm, partition_table_empty.pm, my_gtk.pm, modparm.pm,
- standalone/keyboarddrake, install2.pm, raid.pm, crypto.pm,
- partition_table_mac.pm, standalone/mousedrake, devices.pm,
- install_steps.pm, resize_fat/main.pm, help.pm, install_interactive.pm,
- install_steps_stdio.pm, loopback.pm, resize_fat/any.pm,
- standalone/drakboot, pkgs.pm, keyboard.pm, Xconfigurator.pm, fs.pm,
- interactive_gtk.pm, standalone/drakxservices, fsedit.pm,
- network/network.pm, interactive_stdio.pm, diskdrake.pm, modules.pm,
- resize_fat/directory.pm, standalone/net_monitor,
- install_steps_auto_install.pm, partition_table_sun.pm, proxy.pm,
- lang.pm, partition_table_bsd.pm, tinyfirewall.pm, standalone/draksec,
- standalone/drakxconf, resize_fat/info_sector.pm,
- standalone/adduserdrake, sbus_probing/main.pm, printer.pm,
- partition_table_raw.pm, install_steps_interactive.pm, install_gtk.pm,
- Xconfigurator_consts.pm, resize_fat/boot_sector.pm, partition_table.pm,
- standalone/livedrake, standalone/drakgw, mouse.pm, lvm.pm,
- interactive.pm, share/list, interactive_newt.pm, install_steps_newt.pm,
- bootloader.pm: move to MDK::Common, bool->to_bool
-
- * services.pm, printerdrake.pm: move to MDK::Common, bool->to_bool
- removed/renamed unused/seldom-used functions
-
- * standalone/diskdrake, install_any.pm, any.pm, Xconfig.pm, timezone.pm,
- detect_devices.pm, bootlook.pm: move to MDK::Common, bool->to_bool
- generalize the use of chomp_ as the functional alternative to chomp (and
- works on lists)
-
- * Makefile: temporary hack to have at least good UTF-8 based locales
- (otherwise rpmlib segfaults)
- move to MDK::Common, bool->to_bool
- move to MDK::Common, bool->to_bool
-
-2001/07/23 dam's <damien@mandrakesoft.com>
-
- * modules.pm, network/tools.pm, network/isdn_consts.pm,
- network/netconnect.pm, network/isdn.pm: isdn now works with isdn-light.
- Only 64kb/s and still some debuf stuff to be fixed.
-
-2001/07/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/sk.po: updated Slovak and Croatian files
-
-2001/07/23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: cleanup
-
- * c/stuff.xs.pm, Makefile.drakxtools, standalone.pm, common.pm, Makefile,
- tools/make_mdkinst_stage2, lang.pm, share/po/Makefile,
- share/po/.cvsignore: do not use the po's directly. Use mo's through
- gettext
-
-2001/07/22 dam's <damien@mandrakesoft.com>
-
- * network/netconnect.pm, network/isdn.pm: updated isdn config, moved
- isdn_data from netconnect_const to isdn_const
- big work on isdn. Not finished
-
- * modules.pm, standalone/net_monitor, network/tools.pm, detect_devices.pm:
- big work on isdn. Not finished
-
- * network/netconnect_consts.pm, network/isdn_consts.pm: updated isdn
- config, moved isdn_data from netconnect_const to isdn_const
-
-2001/07/20 François Pons <fpons@mandrakesoft.com>
-
- * docs/README.pxe: initial release, dhcpd and tftpd only.
-
-2001/07/20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/el.po: updated Greek file
-
-2001/07/20 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile: externalize the pm 2 pm_.c in fake_c.pl
-
- * lang.pm: fix
- (load_po): enhance readability
-
- * share/po/fake_c.pl: cleanup
- externalize the pm 2 pm_.c in fake_c.pl
-
- * common.pm (translate): basic plural forms handling (not finished)
-
- * help.pm: fix missing ``"''
-
- * bootloader.pm: fix
- (install_lilo): order fat partitions first
-
-2001/07/19 dam's <damien@mandrakesoft.com>
-
- * share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
- share/help.png: new color
-
- * network/netconnect.pm: correct bug. thanx to the little stagiaire.
-
-2001/07/19 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
- graphic logo for 8.1
-
-2001/07/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
- share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
- share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
- share/po/eu.po: updated Croatian file
-
-2001/07/19 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
- graphic logo for 8.1
-
- * Xconfigurator.pm: fixed problable freeze on pci probe.
-
-2001/07/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
- share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
- share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
- share/po/eu.po: updated Croatian file
-
-2001/07/19 Pixel <pixel@mandrakesoft.com>
-
- * globals.pm: no strict 'refs' instead of 'vars'
-
- * services.pm: rename ask_install_gtk in ask_install, ask_install is now
- ask_install_simple (obsolete)
-
- * install_steps_auto_install.pm: fix exit install in graphical
- auto_install's
-
-2001/07/19 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm, install_steps_newt.pm, install2.pm: based
- on Michael Brown <mbrown@fensystems.co.uk> patch:
- - enables graphical steps in auto_installs for more than gtk
- - various cleanup
-
- * globals.pm: no strict 'refs' instead of 'vars'
-
- * services.pm: rename ask_install_gtk in ask_install, ask_install is now
- ask_install_simple (obsolete)
-
-2001/07/18 mbadaire
-
- * modules.pm, install_any.pm, bootloader.pm: IA64 adaptation
-
-2001/07/18 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * modules.pm, install_steps.pm, install_steps_interactive.pm,
- tools/serial_probe/serial.c, detect_devices.pm, partition_table_mac.pm,
- diskdrake.pm: roll back some changes from PPC beta - OldWorld vs
- NewWorld bootloader
- modem detection on ttyS0, new sound module in 2.4.4
-
-2001/07/17 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: disabled Frame buffer for all S3 cards (hangs with XF4
- and S3 ViRGE on reboot
- with Aurora).
-
- * Xconfigurator.pm: cleaned and added S3 Inc in the list to disable test
- for these card.
-
-2001/07/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/rpmsrate: removed references to XFree86-ISO8859-{2,9} packages (no
- more used)
-
- * keyboard.pm: small keyboard changes
-
-2001/07/13 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/po/fr.po: update
-
-2001/07/12 François Pons <fpons@mandrakesoft.com>
-
- * fs.pm: fixed wrong examination of fsck return code (exit code 1 says
- fsck succeeded in
- fixing partition and now is ok).
-
- * run_program.pm: changed exit code of failed exec in rooted to 128
- instead of 1 (may clash with
- exit code of fsck else).
-
- * any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/12 François Pons <fpons@mandrakesoft.com>
-
- * interactive.pm: added ask_browse_tree_info and ask_browse_tree_info_refW
- (default).
-
- * services.pm: reworked to use new service layout for install.
-
- * install_steps_gtk.pm: use common code for tree with info dialog
- (individual package selection).
-
- * fs.pm: fixed wrong examination of fsck return code (exit code 1 says
- fsck succeeded in
- fixing partition and now is ok).
-
- * interactive_gtk.pm: merging common code for individual package selection
- and service to create
- ask_browse_tree_info_refW, added featrures for group icon always
- up-to-date
- (take some memory but not too much, not used if flat model).
-
- * run_program.pm: changed exit code of failed exec in rooted to 128
- instead of 1 (may clash with
- exit code of fsck else).
-
- * any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/10 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mdk-stage1/init.c, mdk-stage1/Makefile.common: minor mods for PPC build,
- define TIOCSCTTY, Makefile mods
-
-2001/07/09 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added multiple tries if a transaction of only one package
- fails.
-
- * install_any.pm: added LDAP support for authentication.
-
- * install_steps_interactive.pm: added LDAP support for password
- authentication, updated root password window look.
-
- * bootloader.pm: fixed compilation error.
- removed compilation error, the resolution is not quite good and may be
- reworked :-)
-
- * help.pm: updated root password help.
-
-2001/07/09 mbadaire
-
- * bootloader.pm: modify lilo.conf to elilo.conf if arch ia64
-
- * common.pm: Add IA64 support
-
-2001/07/08 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
- boot partition is
- set correctly again
-
-2001/07/08 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
- boot partition is
- set correctly again
-
-2001/07/06 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed selected_leaves. change algorithm as previous one can
- still causes dead
- lock and may not reproduce correct list. take care of choice that need
- to be
- examined before else another package may be chosen if choice is not
- satisfied
- when selecting packages.
-
- * install_any.pm: change all 8 space into a tabulation, this is simple and
- may change visual
- aspect but it gives correct output and filesize by 40%.
-
-2001/07/06 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed selected_leaves. change algorithm as previous one can
- still causes dead
- lock and may not reproduce correct list. take care of choice that need
- to be
- examined before else another package may be chosen if choice is not
- satisfied
- when selecting packages.
-
- * install_any.pm: change all 8 space into a tabulation, this is simple and
- may change visual
- aspect but it gives correct output and filesize by 40%.
-
-2001/07/06 Pixel <pixel@mandrakesoft.com>
-
- * tools/ntp_servers.pl: some workarounds
-
-2001/07/06 Pixel <pixel@mandrakesoft.com>
-
- * tools/ntp_servers.pl: some workarounds
-
-2001/07/05 François Pons <fpons@mandrakesoft.com>
-
- * keyboard.pm: added DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard if a
- laptop is detected.
-
-2001/07/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules_descr.h: add usb net descriptions
-
-2001/07/05 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm (file2part): created
-
- * any.pm: ia64 bootloader configuration adaptations
-
- * bootloader.pm: typo fix
- ia64 bootloader configuration adaptations
-
-2001/07/04 dam's <damien@mandrakesoft.com>
-
- * globals.pm: added error handling
-
- * network/netconnect.pm, network/ethernet.pm: modularized. It compiles,
- runs, and works for some stuff.
- modularization continuated
- updated CVS:
- ----------------------------------------------------------------------
- uses the fantastic global module.
- corrected
-
- * standalone/draknet: corrected
-
- * network/tools.pm, network/adsl.pm: modularized. It compiles, runs, and
- works for some stuff.
- updated CVS:
- ----------------------------------------------------------------------
- uses the fantastic global module.
- corrected
-
- * network/network.pm: modularized. It compiles, runs, and works for some
- stuff.
- modularization continuated
-
- * network/isdn.pm, network/modem.pm: modularized. It compiles, runs, and
- works for some stuff.
- updated CVS:
- ----------------------------------------------------------------------
- uses the fantastic global module.
-
- * docs/net_object_class.fig: updated doc
-
-2001/07/04 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added missing last Card read from Cards+ file.
- allow S3 card to have VideoRam uncommented, fix 86c368 video driver that
- seems
- needing VideoRam too.
- fixed need of video ram if 86c368 and S3 ViRGE.
-
- * install_any.pm: another too wide string truncated to 80 chars.
- make auto_inst.cfg file no longer than 80 chars wide.
-
- * install_steps_interactive.pm: added back timezone settings (thanks
- FredC).
-
-2001/07/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/adsl.c: nonsense to exit if interface is not "eth.*"
-
- * mdk-stage1/newt-frontend.c: very nice things happen when you hardcode
- arrays to a too small value
-
- * docs/HACKING: update -d in order to get all the directories...
-
-2001/07/04 mbadaire
-
- * tools/ia64/elilo.efi, tools/specific_arch, share/list.ia64,
- tools/ia64/e2fsck.shared: Ia64 Adaptation
-
- * install_gtk.pm, share/list.i386, common.pm, share/list.ppc, share/list,
- share/list.alpha, install_steps_gtk.pm, share/list.sparc: Ia64
- adaptation
-
-2001/07/04 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (selected_leaves): fix dead-loop
- (selected_leaves): make it work with loops (eg: mandrake_desk loops with
- control-center resulting on none of them being a leaf)
-
- * perl2fcalls: check exclude_uses before reporting bad use of "use"
- exclude module globals from use's to look at
-
- * globals.pm (import): yet another fix
- fix a pb when init is called before another import
- typo correction
- enhanced: shared values are grouped together based on a name
- module to share constant values between modules
-
- * fsedit.pm: add /boot/efi in suggestions for ia64
-
- * install_interactive.pm, install_steps.pm: fix typo
- verify a /boot/efi partition exists
-
- * Makefile, install_any.pm, share/list.ppc, share/list.alpha, share/list,
- share/list.sparc: remove busybox as default shell. Only use it as the
- interactive shell on tty2
-
-2001/07/03 dam's <damien@mandrakesoft.com>
-
- * network/adsl.pm, network/netconnect_consts.pm, network/tools.pm,
- network/modem.pm, network/netconnect.pm, network/isdn.pm: network
- subsystem now compiles. Enjoy
-
- * docs/net_object_class.fig: documentation about net modules structure
-
-2001/07/03 François Pons <fpons@mandrakesoft.com>
-
- * network/netconnect.pm: fix another dam's sucks
- fix dam's sucks
-
- * network/netconnect_consts.pm, Makefile.config: fix dam's sucks
-
- * standalone/XFdrake: expert is allowed to choose frame buffer.
-
- * install_steps_interactive.pm: added loadSavePackagesOnFloppy to manage
- package selection file used by
- auto_install too from packages tree directly on floppies.
-
- * share/floppy.png: updated size to 16x22 to be more aligned.
- for loading/saving packages selection.
-
- * install_any.pm: modified g_default_packages to be used from package tree
- save on floppy.
-
- * install_steps_gtk.pm: added Load/Save on floppy.
- added improve choice of package, well not very usefull but asked by
- higher
- people :-)
-
-2001/07/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/rp-pppoe/gui/html/props-basic.png,
- mdk-stage1/rp-pppoe/gui/html/props-options.png,
- mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
- mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
- mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
- mdk-stage1/rp-pppoe/gui/html/mainwin.png,
- mdk-stage1/rp-pppoe/gui/html/props-nic.png: plop
-
- * modules.pm, mdk-stage1/probing.h, mdk-stage1/.cvsignore,
- mdk-stage1/usb-resource/Makefile,
- mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile,
- mdk-stage1/usb-resource/.cvsignore, mdk-stage1/probing.c: add support
- for install from USB Network Adapters
-
-2001/07/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/es.po,
- share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po,
- share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po,
- share/po/ru.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/wa.po, share/po/da.po,
- share/po/sv.po, share/po/zh_TW.Big5.po: updated Danish file
-
-2001/07/03 Pixel <pixel@mandrakesoft.com>
-
- * timezone.pm (configureTimezone): propose a list of NTP servers
- (ntp_server): fix
- add ntp handling
-
- * fs.pm (mount): fix fsck.ext2'ing
- (mount): add fsck.ext2 before ext2-mounting
-
- * share/themes/DarkMarble-gloom2.png: re-adding with -kb
- re-adding with -kb
-
- * pixmaps/user.png: re-adding with -kb
- removing for re-adding with -kb
- re-adding with -kb
- removing for re-adding with -kb
-
- * share/themes/blueHeart-button4.png, share/reload.png,
- share/themes/focus.png, share/themes/DarkMarble-button3_in.png,
- share/logo-mandrake.png, share/themes/marble3d-check1.png,
- share/themes/blueHeart-button_def.png, share/rpm-semiselected.png,
- share/logo-mandrake-Desktop.png, share/themes/marble3d-check2.png,
- share/rpm-installed.png, share/themes/marble3d-button1.png,
- share/logo-mandrake_sav.png, share/themes/mdk-button1.png,
- share/themes/DarkMarble-check_off.png, pixmaps/harddrive.png,
- share/themes/marble3d-button_def.png, share/themes/marble3d-button2.png,
- share/help_sav.png, share/themes/DarkMarble-button3_out_prelight.png,
- pixmaps/services.png, pixmaps/bootdisk.png, share/rpm-selected.png,
- share/themes/marble3d-button4.png, pixmaps/bootloader.png,
- share/themes/DarkMarble-button3_out.png, share/logo-mandrake_trans.png,
- share/themes/mdk-button4.png, pixmaps/printer.png, share/rpm-base.png,
- share/logo-mandrake2.png, share/themes/blueHeart-brown_bg1.png,
- share/themes/marble3d-bg1.png, pixmaps/security.png, share/ftin.png,
- pixmaps/rootpasswd.png, share/help.png,
- share/themes/DarkMarble-check_on.png,
- share/themes/blueHeart-button1.png, pixmaps/keyboard.png,
- pixmaps/default.png, share/themes/blueHeart-button2.png, pixmaps/X.png,
- share/themes/DarkMarble-button3_in_prelight.png, share/ftout.png,
- pixmaps/mouse.png, share/rpm-unselected.png: re-adding with -kb
- removing for re-adding with -kb
-
- * install_any.pm, install_steps.pm: add ntp handling
-
- * tools/addchangelog.pl: reverted the last erroneous modif
- re-adding with -kb
-
- * tools/ntp_servers.pl: get a formatted list of NTP servers from an
- authorised source
-
- * install_steps_interactive.pm (doPartitionDisks): better error message
- when no root partition is found
- (configureTimezone): propose a list of NTP servers
- add ntp handling
-
- * docs/comparisons: re-adding with -kb
-
-2001/07/02 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm: new network sources reorganizationCVS:
- ----------------------------------------------------------------------
-
- * share/list: added modinfo
-
- * modparm.pm: syntax correction
-
- * network/netconnect_consts.pm, network.pm, standalone/draknet,
- network/tools.pm, netconnect.pm, network/netconnect.pm,
- network/ethernet.pm, network/isdn.pm, network/adsl.pm,
- network/network.pm, network/modem.pm, netconnect_consts.pm: new network
- sources reorganization
-
-2001/07/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: update po files
-
-2001/07/02 Pixel <pixel@mandrakesoft.com>
-
- * crypto.pm: remove buggy prototype
-
- * share/po/Makefile: yet even better i18n strings extraction
- - fix to add some missing messages
- - add more verif
-
- * c/stuff.xs.pm: use size_t instead of int where it should
-
- * Xconfigurator.pm (write_XF86Config): fix fpons sucks (multi wacoms in
- XF3)
-
- * share/po/b_dump_strings.pm: high level i18n messages getting. only
- partial stuff. Used only for verification
-
- * perl2fcalls: add handling of using pkg::func when func is provided by
- pkg2 use'd by pkg
-
-2001/06/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/id.po: updated Indonesian file
-
-2001/06/25 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm: switch from llseek to lseek64
-
-2001/06/23 siegel
-
- * share/po/de.po: new german version
-
-2001/06/22 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: take care of enterprise kernel if installed.
-
- * install_any.pm: automagically install kernel-enterprise if memory is
- greater than 800MB.
-
-2001/06/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: unfuzzyise
-
-2001/06/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, tinyfirewall.pm,
- share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po,
- share/po/it.po, share/po/id.po, install_steps_interactive.pm,
- share/po/pl.po, share/po/no.po, share/po/fi.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- install_steps_gtk.pm, share/po/sk.po, share/po/lt.po, share/po/ar.po,
- share/po/sl.po, bootlook.pm, share/po/vi.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- install_steps_newt.pm, share/po/af.po: s/Linux-Mandrake/Mandrake Linux/
-
-2001/06/21 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added minimal support for rpmtools >= 3.0
-
-2001/06/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: generate_automatic_stage1_params: listize
- use busybox for the shell of stage2
-
- * mdk-stage1/Makefile: defaults to not spawn shell
-
- * mdk-stage1/hack: kloug
-
- * Makefile, tools/i386/busybox, share/list.ppc, share/list,
- share/list.alpha, share/aliases: use busybox for the shell of stage2
-
-2001/06/21 Pixel <pixel@mandrakesoft.com>
-
- * docs/README, rescue/tree/etc/issue: s/Linux-Mandrake/Mandrake Linux/
- s/linux-mandrake/mandrakesoft/
- (hand made, no i18n messages done)
- s/Linux-Mandrake/Mandrake Linux/
- s/linux-mandrake/mandrakesoft/
- (hand made, no i18n messages done)
-
- * genmodparm: remove duplicate, look in gi/tools
-
- * standalone/printerdrake, install2, docs/HACKING, tools/genmodparm,
- mdk-stage1/config-stage1.h, ChangeLog, resize_fat/README,
- standalone/diskdrake, standalone/XFdrake, rescue/tree/etc/rc.sysinit,
- mdk-stage1/init.c, tools/mailchangelog.pl, detect_devices.pm,
- mdk-stage1/doc/README, resize_fat/main.pm, tools/cvslog2changelog.pl,
- bootloader.pm: s/Linux-Mandrake/Mandrake Linux/
- s/linux-mandrake/mandrakesoft/
- (hand made, no i18n messages done)
-
- * mdk-stage1/make_boot_img: remove GG sux
- s/Linux-Mandrake/Mandrake Linux/
- s/linux-mandrake/mandrakesoft/
- (hand made, no i18n messages done)
-
-2001/06/11 dam's <damien@mandrakesoft.com>
-
- * proxy.pm: updated
- typoCVS:
- ----------------------------------------------------------------------
- proxy
-
- * my_gtk.pm: added gtkset_layout
-
- * standalone/drakproxy: corrected CVS:
- ----------------------------------------------------------------------
- updated
- perlised
-
- * interactive.pm: no icon if wizard
-
-2001/06/11 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: added some bigger memory range.
-
- * Xconfigurator.pm: fix missing newline on /etc/X11/glx.conf when
- modifying mga_dma = 0
- really fix the Matrox G200 PCI card acceleration using XF3, by disabling
- DMA on
- /etc/X11/glx.conf
- added magic probe of resolution found, if the probed resolution seems
- strange
- according to memory available, it try to let the user select the right
- resolution and depth.
-
- * install_steps.pm, printer.pm: applied patches given for printer
- configuration bug reported by David Eastcott.
-
-2001/06/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: have PPP drivers in net_raw rather than in net
- add PPP modules for 'net' drivers
-
- * rescue/tree/etc/rc.sysinit: minor changes
-
- * rescue/tree/etc/inittab, rescue/tree/sbin/fakeshutdown: umount as much
- as possible before rebooting the rescue
-
- * mdk-stage1/ppp/pppd/magic.c, mdk-stage1/ppp/pppd/md5.c,
- mdk-stage1/ppp/pppd/utils.c, mdk-stage1/ppp/pppd/pathnames.h,
- mdk-stage1/ppp/pppd/options.c, mdk-stage1/ppp/pppd/main.c,
- mdk-stage1/ppp/pppd/multilink.c, mdk-stage1/ppp/pppd/auth.c: have adsl
- pppoe installation available
- Initial revision
- import initial ppp sources
-
- * mdk-stage1/dhcp.c: change location of error message when no reply
- received
-
- * mdk-stage1/rp-pppoe/man/pppoe-relay.8,
- mdk-stage1/rp-pppoe/configs/firewall-masq,
- mdk-stage1/rp-pppoe/gui/html/props-nic.png,
- mdk-stage1/rp-pppoe/src/pppoe-sniff.c,
- mdk-stage1/rp-pppoe/configs/firewall-standalone,
- mdk-stage1/rp-pppoe/gui/html/tkpppoe.html,
- mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE, mdk-stage1/rp-pppoe/go-gui,
- mdk-stage1/rp-pppoe/gui/tkpppoe.in, mdk-stage1/rp-pppoe/man/adsl-stop.8,
- mdk-stage1/rp-pppoe/scripts/adsl-start.in,
- mdk-stage1/rp-pppoe/man/pppoe-sniff.8, mdk-stage1/rp-pppoe/go,
- mdk-stage1/rp-pppoe/man/pppoe.8,
- mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
- mdk-stage1/rp-pppoe/gui/tkpppoe.1, mdk-stage1/rp-pppoe/src/Makefile.in,
- mdk-stage1/rp-pppoe/src/pppoe.c, mdk-stage1/rp-pppoe/src/pppoe-server.c,
- mdk-stage1/rp-pppoe/src/pppoe.h, mdk-stage1/rp-pppoe/gui/wrapper.c,
- mdk-stage1/rp-pppoe/man/pppoe-server.8,
- mdk-stage1/rp-pppoe/configs/pppoe.conf,
- mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
- mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/rp-pppoe/src/install-sh,
- mdk-stage1/rp-pppoe/doc/LICENSE, mdk-stage1/rp-pppoe/src/configure,
- mdk-stage1/rp-pppoe/src/config.h.in, mdk-stage1/rp-pppoe/src/relay.c,
- mdk-stage1/rp-pppoe/src/discovery.c, mdk-stage1/rp-pppoe/src/if.c,
- mdk-stage1/rp-pppoe/doc/CHANGES, mdk-stage1/rp-pppoe/src/relay.h,
- mdk-stage1/rp-pppoe/scripts/adsl-init.in,
- mdk-stage1/rp-pppoe/rp-pppoe.spec,
- mdk-stage1/rp-pppoe/scripts/adsl-connect.in,
- mdk-stage1/rp-pppoe/man/pppoe.conf.5,
- mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in,
- mdk-stage1/rp-pppoe/man/adsl-start.8,
- mdk-stage1/rp-pppoe/gui/html/mainwin.png,
- mdk-stage1/rp-pppoe/rp-pppoe-gui.spec,
- mdk-stage1/rp-pppoe/gui/html/props-basic.png,
- mdk-stage1/rp-pppoe/man/adsl-status.8,
- mdk-stage1/rp-pppoe/configs/pppoe-server-options,
- mdk-stage1/rp-pppoe/man/adsl-connect.8,
- mdk-stage1/rp-pppoe/scripts/adsl-setup.in,
- mdk-stage1/rp-pppoe/scripts/adsl-stop.in,
- mdk-stage1/rp-pppoe/gui/Makefile.in, mdk-stage1/rp-pppoe/src/debug.c,
- mdk-stage1/rp-pppoe/doc/PROBLEMS, mdk-stage1/rp-pppoe/src/ppp.c,
- mdk-stage1/rp-pppoe/README,
- mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
- mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1,
- mdk-stage1/rp-pppoe/scripts/adsl-status,
- mdk-stage1/rp-pppoe/man/adsl-setup.8,
- mdk-stage1/rp-pppoe/gui/html/props-options.png,
- mdk-stage1/rp-pppoe/src/configure.in,
- mdk-stage1/rp-pppoe/configs/pap-secrets, mdk-stage1/rp-pppoe/src/md5.c,
- mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in,
- mdk-stage1/rp-pppoe/src/md5.h, mdk-stage1/rp-pppoe/src/plugin.c,
- mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT: Initial revision
- import initial sources from rp-pppoe v3.0
-
- * mdk-stage1/Makefile: change handling of .depend in Makefile
- have adsl pppoe installation available
-
- * mdk-stage1/newt-frontend.c: axalon sucks, we can have NEWT_FLAG_PASSWORD
- that will show us '**' for passwords
-
- * mdk-stage1/ppp/pppd/.cvsignore, mdk-stage1/ppp/.cvsignore,
- mdk-stage1/ppp/pppd/Makefile, mdk-stage1/rp-pppoe/src/.cvsignore,
- mdk-stage1/rp-pppoe/src/config.h, mdk-stage1/adsl.c,
- mdk-stage1/rp-pppoe/.cvsignore, mdk-stage1/rp-pppoe/src/Makefile,
- mdk-stage1/make_boot_img: have adsl pppoe installation available
-
- * detect_devices.pm, install_any.pm, raid.pm, fsedit.pm: include patch to
- autodetect raid arrays (still needs a kernel that implements the
- ioctl..)
-
- * tools/Makefile: perl 5.6.1 now
-
- * mdk-stage1/stage1.c, mdk-stage1/tools.c: do not set root=/dev/ram3 from
- my code anymore, expect the bootloader to set the parameter correctly
-
- * mdk-stage1/ppp/scripts/ip-up.local.add, mdk-stage1/ppp/scripts/README,
- mdk-stage1/ppp/solaris/Makefile.sol2,
- mdk-stage1/ppp/svr4/ppp_comp.Master, mdk-stage1/ppp/sample/ip-down,
- mdk-stage1/ppp/solaris/Makefile.sol2-64,
- mdk-stage1/ppp/include/net/ppp_defs.h,
- mdk-stage1/ppp/pppstats/Makefile.sunos4,
- mdk-stage1/ppp/chat/Makefile.sol2, mdk-stage1/ppp/pppd/sys-linux.c,
- mdk-stage1/ppp/pppd/ipxcp.c, mdk-stage1/ppp/pppd/ipxcp.h,
- mdk-stage1/ppp/pppdump/deflate.c, mdk-stage1/ppp/pppd/Makefile.linux,
- mdk-stage1/ppp/pppd/upap.c, mdk-stage1/ppp/modules/deflate.c,
- mdk-stage1/ppp/README.sunos4, mdk-stage1/ppp/pppdump/Makefile.sol2,
- mdk-stage1/ppp/configure, mdk-stage1/ppp/pppd/upap.h,
- mdk-stage1/ppp/svr4/ppp_mod.c, mdk-stage1/ppp/pppstats/Makefile.sol2,
- mdk-stage1/ppp/pppd/ipv6cp.c, mdk-stage1/ppp/scripts/options-ssh-loc,
- mdk-stage1/ppp/pppd/plugins/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.h,
- mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c,
- mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c,
- mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c,
- mdk-stage1/ppp/solaris/ppp_ahdlc.c, mdk-stage1/ppp/pppd/magic.h,
- mdk-stage1/ppp/svr4/ppp_comp_mod.c,
- mdk-stage1/ppp/include/linux/if_ppp.h, mdk-stage1/ppp/pppd/eui64.c,
- mdk-stage1/ppp/scripts/secure-card, mdk-stage1/ppp/scripts/redialer,
- mdk-stage1/ppp/modules/bsd-comp.c, mdk-stage1/ppp/pppd/eui64.h,
- mdk-stage1/ppp/sunos4/ppp_vdcmd.c, mdk-stage1/ppp/modules/ppp_mod.h,
- mdk-stage1/ppp/pppd/md5.h, mdk-stage1/ppp/pppd/chap_ms.c,
- mdk-stage1/ppp/pppd/chap_ms.h, mdk-stage1/ppp/etc.ppp/pap-secrets,
- mdk-stage1/ppp/solaris/Makefile.top, mdk-stage1/ppp/chat/chat.8,
- mdk-stage1/ppp/svr4/Makefile.sol2-64, mdk-stage1/ppp/svr4/Makefile.sol2,
- mdk-stage1/ppp/include/net/ppp-comp.h, mdk-stage1/ppp/sunos4/Makefile,
- mdk-stage1/ppp/PLUGINS, mdk-stage1/ppp/pppdump/Makefile.sunos4,
- mdk-stage1/ppp/sample/ip-up, mdk-stage1/ppp/sample/options.ttyXX,
- mdk-stage1/ppp/scripts/options-rsh-rem, mdk-stage1/ppp/pppd/fsm.c,
- mdk-stage1/ppp/chat/chat.c, mdk-stage1/ppp/scripts/ppp-on-rsh,
- mdk-stage1/ppp/pppd/fsm.h, mdk-stage1/ppp/pppd/tdb.c,
- mdk-stage1/ppp/pppd/patchlevel.h, mdk-stage1/ppp/pppstats/pppstats.8,
- mdk-stage1/ppp/svr4/ppp.conf, mdk-stage1/ppp/pppd/tdb.h,
- mdk-stage1/ppp/pppd/demand.c, mdk-stage1/ppp/include/net/if_ppp.h,
- mdk-stage1/ppp/solaris/Makedefs, mdk-stage1/ppp/modules/if_ppp.c,
- mdk-stage1/ppp/include/net/slcompress.h, mdk-stage1/ppp/sunos4/Makedefs,
- mdk-stage1/ppp/pppd/sys-linux.c.wtmp,
- mdk-stage1/ppp/include/linux/if_pppvar.h,
- mdk-stage1/ppp/solaris/ppp_comp.c, mdk-stage1/ppp/chat/Makefile.linux,
- mdk-stage1/ppp/README.cbcp, mdk-stage1/ppp/pppd/ppp.pam,
- mdk-stage1/ppp/solaris/ppp_comp_mod.c, mdk-stage1/ppp/Changes-2.3,
- mdk-stage1/ppp/sample/options, mdk-stage1/ppp/pppstats/pppstats.c,
- mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c,
- mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile,
- mdk-stage1/ppp/README.MSCHAP80, mdk-stage1/ppp/pppdump/pppdump.8,
- mdk-stage1/ppp/sunos4/Makefile.top, mdk-stage1/ppp/include/net/pppio.h,
- mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/ppp/FAQ,
- mdk-stage1/ppp/pppd/ipcp.h, mdk-stage1/ppp/pppd/sys-sunos4.c,
- mdk-stage1/ppp/modules/ppp_comp.c, mdk-stage1/ppp/README.sol2,
- mdk-stage1/ppp/modules/vjcompress.c, mdk-stage1/ppp/scripts/ppp-on-ssh,
- mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/ppp.INSTALL,
- mdk-stage1/ppp/modules/ppp.c, mdk-stage1/ppp/pppdump/pppdump.c,
- mdk-stage1/ppp/pppd/plugins/passprompt.c,
- mdk-stage1/ppp/pppdump/Makefile.linux, mdk-stage1/ppp/pppd/lcp.c,
- mdk-stage1/ppp/pppd/lcp.h, mdk-stage1/ppp/scripts/chat-callback,
- mdk-stage1/ppp/chat/Makefile.sunos4, mdk-stage1/ppp/SETUP,
- mdk-stage1/ppp/pppd/Makefile.sol2,
- mdk-stage1/ppp/pppd/plugins/minconn.c,
- mdk-stage1/ppp/etc.ppp/options.options,
- mdk-stage1/ppp/pppdump/Makefile.linux.makeopt,
- mdk-stage1/ppp/svr4/ppp.Node, mdk-stage1/ppp/scripts/options-ssh-rem,
- mdk-stage1/ppp/solaris/ppp.c, mdk-stage1/ppp/svr4/ppp.System,
- mdk-stage1/ppp/etc.ppp/chap-secrets,
- mdk-stage1/ppp/pppstats/Makefile.linux,
- mdk-stage1/ppp/sample/pap-secrets,
- mdk-stage1/ppp/pppd/Makefile.linux.make, mdk-stage1/ppp/pppd/pppd.8,
- mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8,
- mdk-stage1/ppp/pppd/Makefile.sunos4, mdk-stage1/ppp/scripts/ppp-on,
- mdk-stage1/ppp/include/linux/ppp_defs.h,
- mdk-stage1/ppp/scripts/chatchat/chatchat.c,
- mdk-stage1/ppp/scripts/chatchat/README,
- mdk-stage1/ppp/modules/ppp_ahdlc.c, mdk-stage1/ppp/svr4/ppp.Master,
- mdk-stage1/ppp/svr4/Makedefs,
- mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c,
- mdk-stage1/ppp/svr4/ppp_ahdl.System, mdk-stage1/ppp/pppd/pppd.h,
- mdk-stage1/ppp/scripts/ppp-off, mdk-stage1/ppp/solaris/Makedefs.sol2,
- mdk-stage1/ppp/common/zlib.c, mdk-stage1/ppp/scripts/options-rsh-loc,
- mdk-stage1/ppp/common/zlib.h, mdk-stage1/ppp/solaris/ppp_mod.c,
- mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux,
- mdk-stage1/ppp/solaris/ppp_mod.h, mdk-stage1/ppp/scripts/ppp-on-dialer,
- mdk-stage1/ppp/pppd/sys-solaris.c, mdk-stage1/ppp/README.linux,
- mdk-stage1/ppp/sample/auth-down, mdk-stage1/ppp/svr4/ppp_ahdl.Master,
- mdk-stage1/ppp/pppdump/zlib.c, mdk-stage1/ppp/include/pcap-int.h,
- mdk-stage1/ppp/pppdump/zlib.h, mdk-stage1/ppp/pppd/ccp.c,
- mdk-stage1/ppp/chat/Makefile.linux.makeopt, mdk-stage1/ppp/pppd/ccp.h,
- mdk-stage1/ppp/pppd/Makefile.linux.makeopt,
- mdk-stage1/ppp/include/net/vjcompress.h, mdk-stage1/ppp/pppd/cbcp.c,
- mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh,
- mdk-stage1/ppp/pppd/cbcp.h, mdk-stage1/ppp/scripts/ip-down.local.add,
- mdk-stage1/ppp/pppd/tty.c, mdk-stage1/ppp/include/linux/ppp-comp.h,
- mdk-stage1/ppp/sample/auth-up, mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c,
- mdk-stage1/ppp/pppd/pppd.h.wtmp, mdk-stage1/ppp/solaris/ppp.conf,
- mdk-stage1/ppp/pppd/chap.c, mdk-stage1/ppp/pppd/chap.h,
- mdk-stage1/ppp/scripts/callback, mdk-stage1/ppp/linux/Makefile.top,
- mdk-stage1/ppp/svr4/ppp_comp.System, mdk-stage1/ppp/pppd/md4.c,
- mdk-stage1/ppp/svr4/Makedefs.sol2, mdk-stage1/ppp/pppdump/bsd-comp.c,
- mdk-stage1/ppp/README, mdk-stage1/ppp/pppd/md4.h,
- mdk-stage1/ppp/etc.ppp/options, mdk-stage1/ppp/svr4/Makefile.top,
- mdk-stage1/ppp/svr4/Makefile.svr4,
- mdk-stage1/ppp/pppd/plugins/Makefile.linux,
- mdk-stage1/ppp/pppdump/ppp-comp.h: Initial revision
- import initial ppp sources
-
-2001/06/11 odin
-
- * standalone/drakproxy: first import of drakproxy
-
-2001/06/11 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): don't check /usr/bin/urpmi, better check
- /usr/sbin/urpmi.update
-
- * commands.pm (grep_): add a missing semi-colon
-
- * share/compssUsers: remove NIS which is handled by DrakX (titi sucks)
-
-2001/06/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/guessmounts, rescue/make_rescue_img, rescue/tree/etc/rc.sysinit,
- rescue/Makefile:
- - add 'guessmounts' that mimics RH's detecting of partitions when
- rescue starts
-
-2001/06/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: updated Azeri file
-
- * share/po/ru.po, share/po/DrakX.pot: updated Russian file
-
-2001/06/10 Pixel <pixel@mandrakesoft.com>
-
- * rescue/guessmounts: pixelization (tested!)
-
- * install_any.pm (g_auto_install): more comments in auto_inst.cfg file
-
-2001/06/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/list.i386: rescuept is in /sbin now
-
- * share/list: rescuept in /sbin now
-
-2001/06/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: don't wait on upping lo interface
-
- * mdk-stage1/modules.c: fix minor bug detecting when modules are present
-
- * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/random.c:
- i need working random suite for ppp with dietlibc
-
- * mdk-stage1/stage1.c: exit when exec fails after fork, i don't want two
- stage1 processes!
-
-2001/06/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pl.po: updated Polish file
-
-2001/06/05 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (mount): notail in any case
-
- * tools/i386/netboot/menu.lst.example, tools/i386/netboot/menu.lst,
- tools/i386/netboot/.cvsignore: menu.lst is now a local file created from
- the example
-
- * share/list, rescue/list.i386, rescue/list: switch to perl 5.6.1
-
- * Makefile: fix
-
-2001/06/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
- share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated Russian file
-
-2001/06/01 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: use -FULL postfix for common .c files targetting
- stage1-full
-
- * mdk-stage1/stage1.c: minor fix
-
- * mdk-stage1/newt/textbox.c: don't modify newt code to fix dietlibc bugs,
- i want to link against glibc too
-
- * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/strncat.c:
-
- - have strncat behave the same way as in glibc
- - declare that we're using the DIETLIBC in include/stdlib.h, so I can
- change my mind in "dns.c" to handle broken glibc which is not capable of
- doing name resolution with a static binary
-
- * mdk-stage1/dns.c, mdk-stage1/dns.h, mdk-stage1/adsl.c,
- mdk-stage1/adsl.h, mdk-stage1/nfsmount.c, mdk-stage1/network.c,
- mdk-stage1/url.c, mdk-stage1/network.h:
- - first draft of adsl support
- - get back some code for supporting broken glibc unable to resolve
- when linked statically
-
- * mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/lib/tcflush.c,
- mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/speed.c,
- mdk-stage1/dietlibc/lib/tcsetattr.c,
- mdk-stage1/dietlibc/include/termios.h,
- mdk-stage1/dietlibc/include/netdb.h,
- mdk-stage1/dietlibc/libshell/glob.c: slight modifs to get ppp and pppoe
- stuff compile better
-
-2001/05/31 daouda
-
- * bootlook.pm: add runlevel chooser feature
-
-2001/05/31 Pixel <pixel@mandrakesoft.com>
-
- * rescue/make_rescue_img: check presence of files from list and list.ARCH
-
- * Makefile (get_needed_files): exit with error message if files from
- share/list (and
- share/list.ARCH) are missing
-
- * install2.pm: hide step formatPartitions when upgrading
-
-2001/05/30 mbadaire
-
- * mdk-stage1/stage1.c, mdk-stage1/slang/slmalloc.c,
- mdk-stage1/slang/Makefile, mdk-stage1/Makefile.common,
- mdk-stage1/insmod-modutils/obj/Makefile,
- mdk-stage1/insmod-modutils/Makefile, mdk-stage1/bzlib/Makefile,
- mdk-stage1/init-libc-headers.h, mdk-stage1/newt/Makefile,
- mdk-stage1/Makefile, mdk-stage1/insmod-modutils/util/Makefile,
- mdk-stage1/mar/Makefile, mdk-stage1/newt/windows.c:
- - allow build on ia64
- - have CFLAGS centralized in Makefile.common (should help ports such
- as alpha)
- - better looking sub makefiles
-
-2001/05/30 Pixel <pixel@mandrakesoft.com>
-
- * Makefile.drakxtools (install): ensure pm's in subdirs don't have
- /use(diagnostics|vars|strict)/
-
-2001/05/29 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: added fix from Michael Brown to handle pipe in queue
- name for lpr.
-
-2001/05/29 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * share/compssUsers: add NIS client to network clients
-
-2001/05/29 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: added fix from Michael Brown to handle pipe in queue
- name for lpr.
-
-2001/05/28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/newt-frontend.c: use Axalon patch to hide passwords (highly
- rewritten..)
-
-2001/05/25 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * rescue/list.ppc, bootloader.pm: add hfs support to rescue - PPC, fix
- bootstrap creation, formatting sequence
-
- * install_steps_interactive.pm: fix bootstrap information screen back to
- orig with missing ":" - PPC
- add hfs support to rescue - PPC, fix bootstrap creation, formatting
- sequence
-
-2001/05/25 siegel
-
- * share/po/de.po: updated time
- moved to UTF-8
-
-2001/05/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
-2001/05/24 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (g_auto_install): autoExitInstall set if not replay (was
- the opposite)
-
-2001/05/23 Pixel <pixel@mandrakesoft.com>
-
- * rescue/list: add scd0...
-
-2001/05/22 siegel
-
- * share/po/de.po: updates
-
-2001/05/21 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * tools/ppc/mkhybrid-1.12b5.4-x86, tools/ppc/mkINSTALLCD: enable creation
- of PPC boot CD on x86 platform
-
-2001/05/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c:
- - better detect when IP is not good
- - error_msg when netmask seems invalid
- - don't log too much `guessing netmask'
-
- * mdk-stage1/probing.c: be sure to print pci vendor and id with 4 digits
- each
-
-2001/05/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed parted that ask for confirmation if partition
- table is not right (MAXDATA
- for example), this cause parted to ignore warning.
- added blank space between partition windows and linux to help resolving
- above case.
- fixed hole in partitionning (need testing), use fdisk to get disk
- geometry and
- create partition that matches cylinder boundaries (no more
- approximation).
- make sure to create all partitions including /home.
-
-2001/05/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/modules.c: add log for modules aliasing of SCSI drivers
- don't write nonsense code to separate frontend from stage1,
- but rather, try to do some clever things
-
- * mdk-stage1/probing.c: unify user notification of network and scsi
- devices that make load of drivers
- don't write nonsense code to separate frontend from stage1,
- but rather, try to do some clever things
-
- * mdk-stage1/stage1.c, mdk-stage1/frontend.h, mdk-stage1/stage1.h,
- mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
- mdk-stage1/Makefile, mdk-stage1/dhcp.c, mdk-stage1/newt-frontend.c,
- mdk-stage1/disk.c, mdk-stage1/network.c: don't write nonsense code to
- separate frontend from stage1,
- but rather, try to do some clever things
-
- * mdk-stage1/frontend-common.c: plop
-
-2001/05/16 dam's <damien@mandrakesoft.com>
-
- * pixmaps/bootloader.png, pixmaps/user.png, pixmaps/security.png,
- pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png,
- pixmaps/default.png, pixmaps/X.png, pixmaps/mouse.png,
- pixmaps/bootdisk.png, pixmaps/services.png: added icons
-
- * standalone/printerdrake, standalone/keyboarddrake, standalone/drakboot,
- standalone/draksec, standalone/drakxservices, standalone/drakgw,
- standalone/XFdrake, standalone/adduserdrake: added icon management
-
- * my_gtk.pm, interactive.pm: icons management
-
- * install2.pm: added icons management
-
- * standalone/draknet: added icon managment
-
- * pixmaps/printer.png: added icon
-
-2001/05/16 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added support for /var creation, and more specific
- package selection for server.
- Include option support by VERSION file.
-
-2001/05/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/HACKING, mdk-stage1/frontend.h,
- mdk-stage1/TECH-INFOS, mdk-stage1/WHY-DIETLIBC, mdk-stage1/stage1.h,
- mdk-stage1/stdio-frontend.c, mdk-stage1/Makefile, mdk-stage1/README,
- mdk-stage1/newt-frontend.c: have a 100% independence between UI stuff
- and code from stage1
-
-2001/05/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po, share/po/de.po, share/po/DrakX.pot, share/po/tr.po:
- updated Turkish file
-
-2001/05/16 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile: fix yet again DrakX.pot making
-
- * partition_table.pm: re-add reiserfs as it should
- add xfs
-
-2001/05/15 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added missing Aurora, added icewm-light that may be
- usefull.
-
-2001/05/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: libresolv deprecated in GLIBC
- have stage1-full with pcmcia also compile with dietlibc, cool!
-
- * mdk-stage1/network.c: fix guess netmask
- configure_net_device is only used internally
-
- * mdk-stage1/modules.c, mdk-stage1/modules.h: better modules handling
- interface (use of enum rather than guessing single numbers..)
-
- * mdk-stage1/newt-frontend.c: allow wait_message calls to be multi-lines
-
- * mdk-stage1/pcmcia/cardmgr.c: have stage1-full with pcmcia also compile
- with dietlibc, cool!
- - build glibc and dietlibc targets
- - bzero string buffer before sscanf call (dietlibc implementation)
- - verify returns of ioperm so that I can use it in test mode
-
- * mdk-stage1/dietlibc/include/sys/file.h,
- mdk-stage1/dietlibc/include/sys/io.h,
- mdk-stage1/dietlibc/syscalls.s/ioperm.S: have stage1-full with pcmcia
- also compile with dietlibc, cool!
-
- * mdk-stage1/stage1.c: a bit of size reduction plus some language change
- blurk
-
- * mdk-stage1/WHY-DIETLIBC: advocate dietlibc
-
- * mdk-stage1/dietlibc/lib/vsscanf.c: import vsscanf fix from author
-
- * mdk-stage1/disk.c: bzero string buffer before sscanf call, security for
- dietlibc implementation
-
- * mdk-stage1/network.h: configure_net_device is only used internally
-
- * mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/pcmcia_probe.c:
- - build glibc and dietlibc targets
- - bzero string buffer before sscanf call (dietlibc implementation)
- - verify returns of ioperm so that I can use it in test mode
-
- * standalone/drakgw: full path for iptables
-
- * mdk-stage1/probing.c: allow wait_message calls to be multi-lines
- nicer layout for PCI detection messages
- better modules handling interface (use of enum rather than guessing
- single numbers..)
-
-2001/05/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po, share/po/ar.po: Updated Turkish file
-
- * share/keyboards.tar.bz2: Added north-african keyboard
-
- * keyboard.pm: added arabic azerty keyboard
-
-2001/05/15 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile: fix messages to i18n extracting
-
-2001/05/14 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * fs.pm: s|mkxfs|mkfs.xfs|;
-
-2001/05/14 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/nfsmount.c: use new gethostby* interface
-
- * mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2: add stage1-data
- which provides the busybox
-
- * mdk-stage1/network.c: Have the wait_message() with the sleep()
- - complies to gethostby functions
- - add sleep(2) so that net intf is really up before operation
- - more logs
- - FTP: don't try to close control connection with data socket, erhm
- :-(
- - debug netmask guessing, with stdio-frontend
-
- * mdk-stage1/Makefile: i can compile slang and newt with dietlibc now
- every targets build with dietlibc
-
- * mdk-stage1/make_boot_img: use busybox for my debugging purpose
-
- * mdk-stage1/tools.c: no need to poll() for data at beginning of
- load_ramdisk_fd, it was a fix of another problem (bug with file stdio
- operations with sockets in dietlibc)
-
- * mdk-stage1/dietlibc/Makefile: build this new dietlibc
- import new version of dietlibc
-
- * mdk-stage1/dns.c, mdk-stage1/dns.h: now use gethostby* functions
- provided by dietlibc
-
- * mdk-stage1/url.c: use poll() rather than select(), smaller code size
-
- * mdk-stage1/stage1.c: we don't use this sucking sash no more
- we now use `busybox' compiled with the marvellous dietlibc, which
- provides no less than 73 usefull binaries
-
- * mdk-stage1/dietlibc/alpha/semop.S, mdk-stage1/dietlibc/lib/sendmsg.c,
- mdk-stage1/dietlibc/alpha/shmget.S, mdk-stage1/dietlibc/lib/clearerr.c,
- mdk-stage1/dietlibc/include/sys/ipc.h,
- mdk-stage1/dietlibc/alpha/sendmsg.S,
- mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/fwrite.c,
- mdk-stage1/dietlibc/sparc/__testandset.S,
- mdk-stage1/dietlibc/syscalls.s/open.S,
- mdk-stage1/dietlibc/alpha/semget.S, mdk-stage1/dietlibc/dietstdarg.h,
- mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S,
- mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/start.h,
- mdk-stage1/dietlibc/include/sys/syscall.h,
- mdk-stage1/dietlibc/alpha/accept.S, mdk-stage1/dietlibc/lib/sigjmp.c,
- mdk-stage1/dietlibc/syscalls.s/ptrace.s,
- mdk-stage1/dietlibc/lib/isprint.c,
- mdk-stage1/dietlibc/syscalls.s/dietstat.S,
- mdk-stage1/dietlibc/alpha/shutdown.S, mdk-stage1/dietlibc/lib/sendto.c,
- mdk-stage1/dietlibc/sparc/shmat.c, mdk-stage1/dietlibc/include/time.h,
- mdk-stage1/dietlibc/lib/stat_convert.c, mdk-stage1/dietlibc/lib/send.c,
- mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/alpha/waitpid.S,
- mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/lib/readdir.c,
- mdk-stage1/dietlibc/include/sys/sem.h,
- mdk-stage1/dietlibc/syscalls.s/query_module.S,
- mdk-stage1/dietlibc/lib/strchr.c,
- mdk-stage1/dietlibc/syscalls.s/dietfstat64.S,
- mdk-stage1/dietlibc/syscalls.s/lstat64.S,
- mdk-stage1/dietlibc/i386/setjmp.S, mdk-stage1/dietlibc/lib/alloc.c,
- mdk-stage1/dietlibc/lib/perror.c,
- mdk-stage1/dietlibc/include/sys/socket.h,
- mdk-stage1/dietlibc/lib/creat64.c, mdk-stage1/dietlibc/lib/closedir.c,
- mdk-stage1/dietlibc/sparc/pipe.S, mdk-stage1/dietlibc/lib/msgrcv.c,
- mdk-stage1/dietlibc/include/utmp.h,
- mdk-stage1/dietlibc/syscalls.s/sendfile.S,
- mdk-stage1/dietlibc/syscalls.s/nice.S,
- mdk-stage1/dietlibc/syscalls.s/sigprocmask.S,
- mdk-stage1/dietlibc/syscalls.s/select.S,
- mdk-stage1/dietlibc/include/sys/mtio.h,
- mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/alpha/divl.S,
- mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S,
- mdk-stage1/dietlibc/lib/__telldir.c,
- mdk-stage1/dietlibc/i386/__testandset.S,
- mdk-stage1/dietlibc/lib/remove.c,
- mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S,
- mdk-stage1/dietlibc/lib/fputc.c, mdk-stage1/dietlibc/lib/msgctl.c,
- mdk-stage1/dietlibc/alpha/clone.S, mdk-stage1/dietlibc/lib/connect.c,
- mdk-stage1/dietlibc/include/sys/un.h,
- mdk-stage1/dietlibc/alpha/connect.S,
- mdk-stage1/dietlibc/include/termios.h,
- mdk-stage1/dietlibc/lib/sigfillset.c,
- mdk-stage1/dietlibc/lib/sigismember.c,
- mdk-stage1/dietlibc/syscalls.s/dietstat64.S,
- mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/lib/shmget.c,
- mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/lib/fclose.c,
- mdk-stage1/dietlibc/lib/tcsetpgrp.c,
- mdk-stage1/dietlibc/sparc/Makefile.add,
- mdk-stage1/dietlibc/include/sys/shm.h, mdk-stage1/dietlibc/alpha/send.S,
- mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/lib/recvmsg.c,
- mdk-stage1/dietlibc/include/inttypes.h,
- mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S,
- mdk-stage1/dietlibc/lib/semget.c, mdk-stage1/dietlibc/lib/open64.c,
- mdk-stage1/dietlibc/alpha/recvmsg.S,
- mdk-stage1/dietlibc/syscalls.s/fork.S,
- mdk-stage1/dietlibc/lib/strcasecmp.c, mdk-stage1/dietlibc/lib/htonl.c,
- mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/alpha/shmat.S,
- mdk-stage1/dietlibc/include/features.h,
- mdk-stage1/dietlibc/include/syslog.h, mdk-stage1/dietlibc/lib/isascii.c,
- mdk-stage1/dietlibc/syscalls.s/writev.S,
- mdk-stage1/dietlibc/lib/fputs.c,
- mdk-stage1/dietlibc/alpha/sigprocmask.S,
- mdk-stage1/dietlibc/lib/ntohs.c, mdk-stage1/dietlibc/include/sys/uio.h,
- mdk-stage1/dietlibc/syscalls.s/nanosleep.S,
- mdk-stage1/dietlibc/syscalls.s/creat.S,
- mdk-stage1/dietlibc/include/sys/sysinfo.h,
- mdk-stage1/dietlibc/lib/atof.c, mdk-stage1/dietlibc/alpha/msgsnd.S,
- mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/toupper.c,
- mdk-stage1/dietlibc/lib/strlcpy.3, mdk-stage1/dietlibc/lib/sigaddset.c,
- mdk-stage1/dietlibc/i386/select.S, mdk-stage1/dietlibc/i386/unified.S,
- mdk-stage1/dietlibc/include/dirent.h,
- mdk-stage1/dietlibc/include/getopt.h, mdk-stage1/dietlibc/lib/seekdir.c,
- mdk-stage1/dietlibc/include/net/route.h,
- mdk-stage1/dietlibc/syscalls.s/exit.S,
- mdk-stage1/dietlibc/include/pthread.h,
- mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/dietlibc/alpha/msgget.S,
- mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/qsort.c,
- mdk-stage1/dietlibc/lib/execvp.c,
- mdk-stage1/dietlibc/syscalls.s/__reboot.S,
- mdk-stage1/dietlibc/lib/stdin.c,
- mdk-stage1/dietlibc/syscalls.s/getitimer.S,
- mdk-stage1/dietlibc/include/grp.h, mdk-stage1/dietlibc/lib/usleep.c,
- mdk-stage1/dietlibc/lib/lstat.c, mdk-stage1/dietlibc/sparc/setjmp.S,
- mdk-stage1/dietlibc/sparc/fork.S,
- mdk-stage1/dietlibc/syscalls.s/__pread.S,
- mdk-stage1/dietlibc/include/sys/poll.h,
- mdk-stage1/dietlibc/syscalls.s/personality.S,
- mdk-stage1/dietlibc/lib/lseek64.c, mdk-stage1/dietlibc/include/setjmp.h,
- mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/include/string.h,
- mdk-stage1/dietlibc/include/sys/time.h, mdk-stage1/dietlibc/lib/fstat.c,
- mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/isupper.c,
- mdk-stage1/dietlibc/include/sys/param.h,
- mdk-stage1/dietlibc/syscalls.s/__getpagesize.S,
- mdk-stage1/dietlibc/lib/exec_lib.c, mdk-stage1/dietlibc/alpha/shmdt.S,
- mdk-stage1/dietlibc/include/dlfcn.h, mdk-stage1/dietlibc/lib/isdigit.c,
- mdk-stage1/dietlibc/lib/fdopen.c, mdk-stage1/dietlibc/lib/exec_lib.h,
- mdk-stage1/dietlibc/lib/__lxstat.c, mdk-stage1/dietlibc/alpha/remq.S,
- mdk-stage1/dietlibc/include/sys/kd.h,
- mdk-stage1/dietlibc/syscalls.s/read.S, mdk-stage1/dietlibc/lib/fopen.c,
- mdk-stage1/dietlibc/syscalls.s/sched_yield.S,
- mdk-stage1/dietlibc/include/sys/mman.h,
- mdk-stage1/dietlibc/lib/__readdir.c,
- mdk-stage1/dietlibc/lib/cfgetospeed.c,
- mdk-stage1/dietlibc/lib/__dtostr.c, mdk-stage1/dietlibc/lib/execv.c,
- mdk-stage1/dietlibc/alpha/reml.S,
- mdk-stage1/dietlibc/syscalls.s/fcntl.S,
- mdk-stage1/dietlibc/include/errno.h, mdk-stage1/dietlibc/lib/ferror.c,
- mdk-stage1/dietlibc/syscalls.s/ipc.S,
- mdk-stage1/dietlibc/syscalls.s/mlockall.S,
- mdk-stage1/dietlibc/lib/fgetc.c, mdk-stage1/dietlibc/lib/strtoull.c,
- mdk-stage1/dietlibc/include/sys/msg.h,
- mdk-stage1/dietlibc/syscalls.s/sigsuspend.S,
- mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/vsscanf.c,
- mdk-stage1/dietlibc/lib/ftell.c, mdk-stage1/dietlibc/include/unistd.h,
- mdk-stage1/dietlibc/lib/msgsnd.c, mdk-stage1/dietlibc/lib/semop.c,
- mdk-stage1/dietlibc/include/net/if_arp.h,
- mdk-stage1/dietlibc/lib/execlp.c,
- mdk-stage1/dietlibc/syscalls.s/stat64.S,
- mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/dietstdio.h,
- mdk-stage1/dietlibc/lib/feof.c, mdk-stage1/dietlibc/lib/opendir.c,
- mdk-stage1/dietlibc/syscalls.s/fstat64.S,
- mdk-stage1/dietlibc/syscalls.s/sched_setparam.S,
- mdk-stage1/dietlibc/include/sys/reboot.h,
- mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/lib/execl.c,
- mdk-stage1/dietlibc/include/sys/sendfile.h,
- mdk-stage1/dietlibc/include/sys/syslog.h,
- mdk-stage1/dietlibc/syscalls.s/iopl.S, mdk-stage1/dietlibc/lib/msgget.c,
- mdk-stage1/dietlibc/syscalls.s/sched_getparam.S,
- mdk-stage1/dietlibc/lib/vsnprintf.c,
- mdk-stage1/dietlibc/include/signal.h,
- mdk-stage1/dietlibc/syscalls.s/pause.S,
- mdk-stage1/dietlibc/include/arpa/inet.h,
- mdk-stage1/dietlibc/include/sys/wait.h,
- mdk-stage1/dietlibc/alpha/time.S, mdk-stage1/dietlibc/lib/ttyname.c,
- mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/__stat64.c,
- mdk-stage1/dietlibc/alpha/recv.S, mdk-stage1/dietlibc/lib/fgets.c,
- mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/lib/__lltostr.c,
- mdk-stage1/dietlibc/lib/__ltostr.c,
- mdk-stage1/dietlibc/sparc/__longjmp.S, mdk-stage1/dietlibc/lib/puts.c,
- mdk-stage1/dietlibc/lib/rand.c, mdk-stage1/dietlibc/syscalls.s/fsync.S,
- mdk-stage1/dietlibc/include/fnmatch.h, mdk-stage1/dietlibc/lib/fflush.c,
- mdk-stage1/dietlibc/lib/htons.c,
- mdk-stage1/dietlibc/syscalls.s/sigaltstack.S,
- mdk-stage1/dietlibc/include/sys/resource.h,
- mdk-stage1/dietlibc/lib/__stat64_cvt.c,
- mdk-stage1/dietlibc/lib/localtime.c,
- mdk-stage1/dietlibc/alpha/seteuid.c,
- mdk-stage1/dietlibc/syscalls.s/stime.S,
- mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/__xstat.c,
- mdk-stage1/dietlibc/ppc/Makefile.add,
- mdk-stage1/dietlibc/sparc/unified.S, mdk-stage1/dietlibc/lib/bsearch.c,
- mdk-stage1/dietlibc/include/net/if.h,
- mdk-stage1/dietlibc/include/shadow.h,
- mdk-stage1/dietlibc/lib/__rewinddir.c,
- mdk-stage1/dietlibc/include/daemon.h, mdk-stage1/dietlibc/lib/mkfifo.c,
- mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/include/pwd.h,
- mdk-stage1/dietlibc/lib/strrchr.c, mdk-stage1/dietlibc/lib/__seekdir.c,
- mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/alpha/shmctl.S,
- mdk-stage1/dietlibc/lib/fdglue.c, mdk-stage1/dietlibc/lib/fseek.c,
- mdk-stage1/dietlibc/include/regex.h,
- mdk-stage1/dietlibc/include/sys/ptrace.h,
- mdk-stage1/dietlibc/lib/tcdrain.c,
- mdk-stage1/dietlibc/syscalls.s/lstat.S,
- mdk-stage1/dietlibc/alpha/semctl.S, mdk-stage1/dietlibc/lib/recvfrom.c,
- mdk-stage1/dietlibc/lib/random.c,
- mdk-stage1/dietlibc/syscalls.s/times.S,
- mdk-stage1/dietlibc/lib/getpgrp.c, mdk-stage1/dietlibc/lib/cfmakeraw.c,
- mdk-stage1/dietlibc/lib/stat.c, mdk-stage1/dietlibc/syscalls.s/write.S,
- mdk-stage1/dietlibc/syscalls.s/dietlstat64.S,
- mdk-stage1/dietlibc/ppc/__testandset.S,
- mdk-stage1/dietlibc/include/mntent.h,
- mdk-stage1/dietlibc/include/sys/file.h,
- mdk-stage1/dietlibc/syscalls.s/fstat.S,
- mdk-stage1/dietlibc/syscalls.s/llseek.S,
- mdk-stage1/dietlibc/lib/strsep.c,
- mdk-stage1/dietlibc/include/sys/stat.h,
- mdk-stage1/dietlibc/syscalls.s/munlockall.S,
- mdk-stage1/dietlibc/syscalls.s/setpriority.S,
- mdk-stage1/dietlibc/include/assert.h,
- mdk-stage1/dietlibc/include/strings.h,
- mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/gmtime.c,
- mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/lib/__isnan.c,
- mdk-stage1/dietlibc/ppc/__longjmp.S,
- mdk-stage1/dietlibc/lib/__closedir.c,
- mdk-stage1/dietlibc/include/sys/signal.h,
- mdk-stage1/dietlibc/lib/rewinddir.c, mdk-stage1/dietlibc/lib/stdout.c,
- mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/dietlibc/.cvsignore,
- mdk-stage1/dietlibc/lib/telldir.c, mdk-stage1/dietlibc/include/glob.h,
- mdk-stage1/dietlibc/lib/tm_conv.c,
- mdk-stage1/dietlibc/syscalls.s/reboot.S,
- mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S,
- mdk-stage1/dietlibc/syscalls.s/umount2.S,
- mdk-stage1/dietlibc/syscalls.s/readv.S,
- mdk-stage1/dietlibc/lib/__fxstat.c,
- mdk-stage1/dietlibc/include/sys/select.h,
- mdk-stage1/dietlibc/syscalls.s/syslog.S,
- mdk-stage1/dietlibc/syscalls.s/sysinfo.S,
- mdk-stage1/dietlibc/lib/fprintf.c,
- mdk-stage1/dietlibc/include/sys/cdefs.h, mdk-stage1/dietlibc/README,
- mdk-stage1/dietlibc/lib/fread.c, mdk-stage1/dietlibc/lib/getpwnam.c,
- mdk-stage1/dietlibc/syscalls.s/getcwd.S,
- mdk-stage1/dietlibc/lib/getservent.c, mdk-stage1/dietlibc/lib/tolower.c,
- mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/alpha/recvfrom.S,
- mdk-stage1/dietlibc/include/elf.h, mdk-stage1/dietlibc/alpha/sendto.S,
- mdk-stage1/dietlibc/lib/fileno.c, mdk-stage1/dietlibc/i386/clone.S,
- mdk-stage1/dietlibc/lib/__opendir.c,
- mdk-stage1/dietlibc/include/sched.h, mdk-stage1/dietlibc/alpha/__time.c,
- mdk-stage1/dietlibc/lib/ispunct.c, mdk-stage1/dietlibc/lib/printf.c,
- mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/lib/strncasecmp.c,
- mdk-stage1/dietlibc/lib/__getcwd.c,
- mdk-stage1/dietlibc/include/netinet/in.h,
- mdk-stage1/dietlibc/lib/shmctl.c,
- mdk-stage1/dietlibc/syscalls.s/dietlstat.S,
- mdk-stage1/dietlibc/include/arpa/nameser.h,
- mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/semctl.c,
- mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/lib/shutdown.c,
- mdk-stage1/dietlibc/lib/setpgrp.c, mdk-stage1/dietlibc/alpha/msgrcv.S,
- mdk-stage1/dietlibc/lib/stderr.c,
- mdk-stage1/dietlibc/syscalls.s/close.S,
- mdk-stage1/dietlibc/syscalls.s/dietfstat.S,
- mdk-stage1/dietlibc/include/locale.h,
- mdk-stage1/dietlibc/syscalls.s/getpriority.S,
- mdk-stage1/dietlibc/lib/__fstat64.c, mdk-stage1/dietlibc/lib/isalpha.c,
- mdk-stage1/dietlibc/lib/reboot.c, mdk-stage1/dietlibc/lib/isspace.c,
- mdk-stage1/dietlibc/include/sys/mount.h,
- mdk-stage1/dietlibc/lib/creat.c, mdk-stage1/dietlibc/syscalls.s/lseek.S,
- mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/dietwarning.h,
- mdk-stage1/dietlibc/lib/islower.c,
- mdk-stage1/dietlibc/alpha/Makefile.add, mdk-stage1/dietlibc/lib/abort.c,
- mdk-stage1/dietlibc/alpha/msgctl.S, mdk-stage1/dietlibc/lib/isalnum.c,
- mdk-stage1/dietlibc/include/ctype.h,
- mdk-stage1/dietlibc/include/netdb.h,
- mdk-stage1/dietlibc/include/memory.h, mdk-stage1/dietlibc/lib/iscntrl.c,
- mdk-stage1/dietlibc/i386/Makefile.add, mdk-stage1/dietlibc/lib/getopt.c,
- mdk-stage1/dietlibc/syscalls.s/waitpid.S,
- mdk-stage1/dietlibc/lib/strtoul.c,
- mdk-stage1/dietlibc/syscalls.s/stat.S,
- mdk-stage1/dietlibc/syscalls.s/sysctl.S: import new version of dietlibc
-
- * mdk-stage1/insmod-busybox/busybox.h: fix conflicts with dietlibc headers
-
- * mdk-stage1/dietlibc/include/stdio.h,
- mdk-stage1/dietlibc/include/stdlib.h,
- mdk-stage1/dietlibc/include/math.h,
- mdk-stage1/dietlibc/include/sys/times.h: have slang and newt compile
- with dietlibc
- import new version of dietlibc
-
- * mdk-stage1/Makefile.common: new dietlibc binaries location
-
- * mdk-stage1/newt-frontend.c: i can compile slang and newt with dietlibc
- now
-
- * mdk-stage1/dietlibc/lib/abs.c: have slang and newt compile with dietlibc
-
- * mdk-stage1/dhcp.c: Have the wait_message() with the sleep()
- - add a sleep(2) after ioctl ifupping so that further operation can
- work normally
- - more logs
-
-2001/05/14 kjx
-
- * share/po/zh_CN.GB2312.po: process untranslated
-
-2001/05/14 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm, fsedit.pm, partition_table.pm, install_any.pm: basic xfs handling
-
-2001/05/11 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: fixed missing package which may be selected on
- hardware during real install.
-
- * rescue/tree/etc/oem: added support to change boot entries when invoking
- oem script.
- fixed missing SCSI support and driver module loading.
- fixed missing speficic packages not installed on HW detected.
-
-2001/05/08 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: VBox -> HBox in Embedded mode
-
- * standalone/mousedrake: code cleaned and debugged
- added mouse test. Ugly
-
-2001/05/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stdio-frontend.c: fix minor stuff
- re-include correct layout for [] choices, in a smaller way than before
-
- * mdk-stage1/tools.c: minor fix
- needs to poll() for available data before loading ramdisk because ftp
- transfers would fail in some situations
-
- * mdk-stage1/init.c: new maxim
-
- * mdk-stage1/config-stage1.h: adjust COMPRESSION_RATIO so that last star
- is printed when last blocks of file are read
-
- * mdk-stage1/dhcp.c: use poll() rather than select() to win some bytesCVS:
- ----------------------------------------------------------------------
-
-2001/05/08 siegel
-
- * share/po/de.po: fixed plenty ugly typos
-
-2001/05/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po: updated Brazilian file
-
-2001/05/07 yduret
-
- * docs/README.devel: fix one typo
-
- * any.pm, bootloader.pm: updated install_lilo() according to new lilo
- package
- (/boot/lilo-{menu,graphic,text})
-
-2001/05/06 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad output and bad adsl script
-
-2001/05/06 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install2.pm: workaround for msec hang on PPC
-
-2001/05/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/05/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * c/smp.c, keyboard.pm, Xconfigurator.pm: force XF4 in expert too for PPC,
- don't run xmodmap, PPC SMP routine placeholder
-
-2001/05/04 Thierry Vignaud <tvignaud@mandrakesoft.com>
-
- * mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/04/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stdio-frontend.c: nicer layout for progressbar and
- statusreport, when update_progression
- Provide some description of the drivers
-
- * docs/HACKING: fix
- pserver -> ext
-
- * mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/tools.h,
- mdk-stage1/newt-frontend.c, mdk-stage1/modules_descr.h,
- mdk-stage1/modules.c: Provide some description of the drivers
-
-2001/04/30 Pixel <pixel@mandrakesoft.com>
-
- * docs/README: s/gi.tar.bz2/DrakX-*.src.rpm/
-
- * docs/advocacy: fuck'em all
-
-2001/04/26 François Pons <fpons@mandrakesoft.com>
-
- * docs/README.devel, docs/README: added some more comments for DrakX code
- source and usage.
-
-2001/04/25 François Pons <fpons@mandrakesoft.com>
-
- * tools/oem-prepare: fixed use of VERSION file to find language.
- prepare a oem disk to be used by moving all files that will not be
- installed by oem (oem-master disk preparation).
-
- * rescue/tree/etc/closurepkgs, rescue/tree/etc/part_and_bootloader: fixed
- usage of free space on disk, added NVIDIA packages to install.
-
- * rescue/tree/etc/oem-server: added missing VERSION file.
- fixed usage of free space on disk, added NVIDIA packages to install.
-
- * rescue/tree/etc/oem: added missing autologin package.
- added option to enable oem mode.
- added missing VERSION file.
- fixed usage of free space on disk, added NVIDIA packages to install.
-
-2001/04/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: version is labelled "cooker"
-
-2001/04/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * tools/serial_probe/serial.c, tools/serial_probe/serial_probe.c:
- integrate fg's fixes for includes
-
-2001/04/19 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * rescue/list.sparc, rescue/list.i386, rescue/list.ppc, rescue/list.alpha,
- rescue/list: move /sbin/sfdisk to list.arch, update both list.ppc
-
-2001/04/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: fix bug that trashes the network config of stage1
- during stage2, when no DNS is provided
-
-2001/04/18 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: last corrections
-
- * standalone/draknet, netconnect.pm: last corrections
- corrected internet connection test, and parameters editing
-
- * install_steps_gtk.pm: corrected cursor on details
-
-2001/04/18 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: * put am-utils and autofs in NETWORKING_FILE
- * drakprofile in level 1
- * swapped tkinter and python-devel
- * vnc-server in NETWORKING_REMOTE_ACCESS_SERVER
- * vnc-SVGALIB in level 2
-
-2001/04/17 dam's <damien@mandrakesoft.com>
-
- * standalone/mousedrake: fixed embedded
-
- * bootlook.pm: chmoded autologin
-
-2001/04/17 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: restored grub as everything seems fine.
-
- * rescue/tree/etc/oem-server: fixed swap size instead of inst size for
- swap gap.
- make sure kernel will be selected.
-
- * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
- make sure kernel is selected.
-
- * install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: fix 75dpi-fonts bug with MAKEDEV
-
-2001/04/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * standalone/draknet: fixed typo
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated Basque file
-
-2001/04/17 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): better ensure
- 'broadcast' insteaf of overriding
- (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
- means no NIS
-
- * any.pm (setupBootloader): remove a warning
-
-2001/04/17 warly
-
- * share/rpmsrate: put MAKEDEV at end of line
-
-2001/04/17 dam's <damien@mandrakesoft.com>
-
- * standalone/mousedrake: fixed embedded
-
- * bootlook.pm: chmoded autologin
-
-2001/04/17 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: restored grub as everything seems fine.
-
- * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
- make sure kernel is selected.
- fixed parted problem.
-
- * rescue/tree/etc/oem-server: fixed swap size instead of inst size for
- swap gap.
- make sure kernel will be selected.
-
- * install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated Basque file
-
-2001/04/17 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): better ensure
- 'broadcast' insteaf of overriding
- (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
- means no NIS
-
- * any.pm (setupBootloader): remove a warning
-
-2001/04/17 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: chmoded autologin
-
-2001/04/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
- make sure kernel is selected.
- fixed parted problem.
-
- * rescue/tree/etc/oem-server: fixed swap size instead of inst size for
- swap gap.
- make sure kernel will be selected.
-
-2001/04/17 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): better ensure
- 'broadcast' insteaf of overriding
- (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
- means no NIS
-
- * any.pm (setupBootloader): remove a warning
-
-2001/04/17 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: chmoded autologin
-
-2001/04/17 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
- make sure kernel is selected.
- fixed parted problem.
-
- * rescue/tree/etc/oem-server: fixed swap size instead of inst size for
- swap gap.
- make sure kernel will be selected.
-
-2001/04/17 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): set NIS to broadcast
- when NIS asked. Empty NIS still means no NIS
-
- * any.pm (setupBootloader): remove a warning
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * any.pm: removed Grub if Embedded
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: minor bug.
-
- * any.pm: removed Grub if Embedded
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * standalone/net_monitor: updated
- updated
-
- * network.pm: dhcpd -> dhcpcd
-
- * Xconfigurator.pm: added nice monitor.png
-
- * netconnect.pm: minor bug.
- dhcpd -> dhcpcd
-
- * standalone/draknet: updated
-
- * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
- pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
- pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
- pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
- pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
- pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
- pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
- removed for readd in kb
-
- * my_gtk.pm: corrected typo
- added grey fix for contreol-center
-
-2001/04/16 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: added missing rio500 in closure.
- finally fixed menu by generating /etc/rpm/macros file.
- added missing LF.
- now fixed menu problems.
- try another fix for RPM_INSTALL_LANG as first fr_FR:fr instead of
- fr:fr_FR.
- really disable server.
- maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french).
- fixed to avoid nasty message in wrong places.
- moved warning message around.
- fixed wrong LOCALES"...".
- fixed lang weirdness, fixed minimal size of / partition to be more
- confortable,
- fixed default language for starting DrakX after.
-
- * Xconfig.pm: fixed standalone error for wacom weirdness.
- fixed HASH() in /etc/X11/XF86Config*.
-
- * fs.pm: restored not neccessary to load reiserfs for formating.
- loading reiserfs module before formatting.
-
-2001/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
- pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
- XFdrake
-
- * mdk-stage1/TECH-INFOS: update doc
-
- * share/po/fr.po: fix minor thing
-
-2001/04/16 Pixel <pixel@mandrakesoft.com>
-
- * share/compssUsers: remove BURNER from Utilities
-
-2001/04/16 warly
-
- * share/rpmsrate: lower portsentry
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: added nice monitor.png
-
- * standalone/net_monitor: updated
-
- * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
- pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
- pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
- pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
- pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
- pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
- pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
- removed for readd in kb
-
- * my_gtk.pm: corrected typo
- added grey fix for contreol-center
-
-2001/04/16 François Pons <fpons@mandrakesoft.com>
-
- * Xconfig.pm: fixed standalone error for wacom weirdness.
- fixed HASH() in /etc/X11/XF86Config*.
-
- * rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
- "fr:fr_FR" for french).
- fixed to avoid nasty message in wrong places.
- moved warning message around.
- fixed wrong LOCALES"...".
- fixed lang weirdness, fixed minimal size of / partition to be more
- confortable,
- fixed default language for starting DrakX after.
-
-2001/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
- pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
- XFdrake
-
-2001/04/16 Pixel <pixel@mandrakesoft.com>
-
- * share/compssUsers: remove BURNER from Utilities
-
-2001/04/16 warly
-
- * share/rpmsrate: lower portsentry
-
-2001/04/16 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: bugfix
- added update thread
- corrected bad install package.
- updated expert mode
-
- * network.pm, install_steps.pm: corrected bad install package.
-
- * Xconfigurator.pm: added nice monitor.png
-
- * tinyfirewall.pm: corrected package installation
-
- * standalone/net_monitor: updated
-
- * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
- pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
- pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
- pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
- pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
- pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
- pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
- removed for readd in kb
-
- * my_gtk.pm: corrected typo
- added grey fix for contreol-center
-
- * netconnect.pm: debug
- corrected bad install package.
-
-2001/04/16 François Pons <fpons@mandrakesoft.com>
-
- * Xconfig.pm: fixed standalone error for wacom weirdness.
- fixed HASH() in /etc/X11/XF86Config*.
-
- * rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
- "fr:fr_FR" for french).
- fixed to avoid nasty message in wrong places.
- moved warning message around.
- fixed wrong LOCALES"...".
- fixed lang weirdness, fixed minimal size of / partition to be more
- confortable,
- fixed default language for starting DrakX after.
-
-2001/04/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
- pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
- XFdrake
-
-2001/04/16 Pixel <pixel@mandrakesoft.com>
-
- * share/compssUsers: remove BURNER from Utilities
-
- * install_any.pm (g_auto_install): do not take 'mkbootdisk'
-
-2001/04/16 warly
-
- * share/rpmsrate: lower portsentry
-
-2001/04/15 fabman
-
- * share/po/es.po: updates
-
-2001/04/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix minor typo
-
-2001/04/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/gl.po: updated Galician file
-
-2001/04/15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
- Workstation, Server) to make gg happy
-
-2001/04/15 fabman
-
- * share/po/es.po: updates
-
-2001/04/15 fcrozat
-
- * share/rpmsrate: Add mozilla-mail and mozilla-irc to correct categories
-
-2001/04/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fix minor typo
-
-2001/04/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po, share/po/ko.po: Updated Swedish and Korean files
-
-2001/04/15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
- Workstation, Server) to make gg happy
-
- * printerdrake.pm (main): restore the "Ok" button for the queues
- manipulation
-
- * any.pm (write_passwd_user): fix use of local
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): add an eval
- around "require log" to keep perl from going totally mad (getting things
- like v18.843.482 required--this is only v5.6.0)
-
-2001/04/15 yduret
-
- * bootlook.pm: bug fix: if cancel pressed in lilo/grub choice => return to
- mcc normally
- fix layout & size
-
-2001/04/14 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected isdn detect display
-
- * standalone/net_monitor, standalone/draknet: wait 10 sec, instead of 7
-
-2001/04/14 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
- selection of packages.
-
- * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (naughtyServers): add apache
-
- * install_gtk.pm (createXconf): ensure the mouse device is created (mainly
- for auto_inst)
-
- * install_steps_interactive.pm (exitInstall): fix bad i18n of Replay
- button (thx2submarine)
-
-2001/04/14 warly
-
- * share/rpmsrate: lower viavoicemenu to 1 to avoid error message for
- powerpack boxes without ViaVoice
-
-2001/04/14 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
- selection of packages.
-
- * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
- test)
-
- * Xconfigurator.pm (use vars): fix stew sux
- (testFinalConfig): nicer stderr handling
-
- * interactive_gtk.pm, interactive_newt.pm (exit): fix the exit code
-
-2001/04/14 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed to gzip synthesis file.
- safe guard generation of synthesis file.
- fixed umask on urpmi list file and generate synthesis file for each
- hdlist.
-
- * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (configureX): fix link /etc/gtk (to
- /mnt/etc/gtk) instead of /etc/gtkrc
-
- * any.pm (autologin): spurious messages of chksession -> dave nul
-
- * interactive_newt.pm (exit): fix the exit code
- (wait_message_endW): don't log "none stacked wait-messages" (as a lot of
- them exist...)
- (waitbox): remove spurious '0' in wait_messages
-
- * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
- test)
-
- * Xconfigurator.pm (use vars): fix stew sux
- (testFinalConfig): nicer stderr handling
-
- * interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14 warly
-
- * share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
- and list
-
-2001/04/14 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed to gzip synthesis file.
- safe guard generation of synthesis file.
- fixed umask on urpmi list file and generate synthesis file for each
- hdlist.
-
-2001/04/14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (configureX): fix link /etc/gtk (to
- /mnt/etc/gtk) instead of /etc/gtkrc
-
- * any.pm (autologin): spurious messages of chksession -> dave nul
-
- * interactive_newt.pm (exit): fix the exit code
- (wait_message_endW): don't log "none stacked wait-messages" (as a lot of
- them exist...)
- (waitbox): remove spurious '0' in wait_messages
-
- * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
- test)
-
- * Xconfigurator.pm (use vars): fix stew sux
- (testFinalConfig): nicer stderr handling
-
- * interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm: updates to X, mouse
- setup for PPC
-
-2001/04/14 warly
-
- * share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
- and list
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * Xconfigurator.pm: corrected
- updated
- updated message
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
- opened).
-
-2001/04/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: Updated Norwegian file
- Updated po files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
- share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated po files
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (main): reverse message
-
- * install_steps_gtk.pm (installPackages): hide Details button sooner
- (installPackages): do not show button "Details" when no advertising
-
- * Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
- ru(winkeys), it is redondant
-
- * interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
- * any.pm (ask_users): do not have an empty icon. better not ask for icon
- if no icon
-
-2001/04/13 siegel
-
- * share/po/de.po: updates
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * Xconfigurator.pm: corrected
- updated
- updated message
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
- opened).
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (main): reverse message
-
- * install_steps_gtk.pm (installPackages): hide Details button sooner
- (installPackages): do not show button "Details" when no advertising
-
- * Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
- ru(winkeys), it is redondant
-
- * interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
- * any.pm (ask_users): do not have an empty icon. better not ask for icon
- if no icon
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * Xconfigurator.pm: corrected
- updated
- updated message
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * install_steps_gtk.pm (installPackages): hide Details button sooner
- (installPackages): do not show button "Details" when no advertising
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: updated
- updated message
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * install_steps_gtk.pm (installPackages): do not show button "Details"
- when no advertising
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: updated
- updated message
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * standalone/draknet: message corrected
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * install_steps_gtk.pm (installPackages): do not show button "Details"
- when no advertising
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: updated
- updated message
-
- * standalone/draknet: message corrected
- updated
-
- * netconnect.pm: net_cnx_up/down xritten in neuneu
-
- * bootlook.pm: embedded = 0 -> local
-
-2001/04/13 fabman
-
- * share/po/es.po: synchro with EN
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
- available.
- fixed very old typo not encountered before;
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * install_steps_gtk.pm (installPackages): do not show button "Details"
- when no advertising
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add ssh server in Network Computer Server
- add DATABASES to Database
- add icons for server
-
-2001/04/13 dam's <damien@mandrakesoft.com>
-
- * network.pm: updated wireless configuration
-
- * netconnect.pm: corrected loop in isdn + other things
-
- * bootlook.pm: embedded = 0 -> local
-
- * standalone/draknet: updated
- added delete event
-
-2001/04/13 François Pons <fpons@mandrakesoft.com>
-
- * netconnect.pm: fixed syntax error :-)
-
- * install_steps.pm, install_steps_gtk.pm: added conditional update-menus
- if package are installed.
-
- * install_steps_interactive.pm: added conditional update-menus if package
- are installed.
- make sure update-menus is called after installing cups related packages.
-
-2001/04/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/fr.po, share/po/sv.po, share/po/hu.po: Updated
- Croatian and Swedish files
-
- * share/po/sl.po, share/po/cy.po, share/po/ca.po, share/po/ga.po,
- share/po/is.po, share/po/cs.po: Removed po files with too low leve lof
- translating ( < 60% )
- so they are not included on final CD
-
-2001/04/13 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (backtrace): created
-
- * install_steps_interactive.pm (addUser): remove the setting of
- $o->{autologin}, now done in any::autologin
-
- * bootlook.pm: don't use Locale::GetText, use DrakX's i18n
-
- * install2.pm (miscellaneous): add setting KEYBOARD=yes in
- /etc/sysconfig/usb as asked by Lord Chmou
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
- list instead of dying (for 8.0 only, should be switched back to die)
- (ask_from_listf): display the backtrace when empty list
-
- * my_gtk.pm (new): make dams happy
-
- * any.pm (ask_users): add the empty icon
- (autologin): fix
-
-2001/04/13 warly
-
- * share/compssUsers: add DATABASES to Database
- add icons for server
-
-2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: remove unnecessary redhat history code
-
-2001/04/12 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed wrong kernel version extraction (typically for
- upgrade).
-
- * install_steps_interactive.pm: removed Cancel of Summary.
- fixed ask printer configuration.
-
- * detect_devices.pm: fix Hewlett-Packard to HP in case.
-
- * standalone/printerdrake: never ask to configure a printer in standalone.
-
- * printerdrake.pm: automatically add a queue if nothing exists.
- fixed ask to configure a printer.
-
- * interactive.pm: removed strict die on empty list.
-
- * live_install2: added some gtk and gdk_imlib missing variables.
-
- * live_install: removed gtk variable for data, moved to second script.
-
- * modules.pm, commands.pm, lang.pm, pkgs.pm, keyboard.pm: fixed log of
- packdrake.
-
-2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: remove unneeded #define
-
- * standalone/drakgw: add some rule so later on tinyfirewall will not
- prevent everything from working
-
- * share/po/fr.po: minor fix
- write some ppc translations
-
-2001/04/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: Updated Italian file
-
-2001/04/12 Pixel <pixel@mandrakesoft.com>
-
- * printer.pm: use run_program and remove "require run_program"s
-
- * my_gtk.pm (main): only accept X (gdk) events key_press, key_release and
- exposure (so
- that not to receive motion_notify which would generate focus_out in
- non-interesting cases)
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): fix the test
- for empty lists
- (ask_from_entries_refH_powered_normalize):
- - when not_edit and empty list, die.
- - when not_edit and single element list, don't display that entry.
-
- * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
- * modules.pm (configure_pcmcia): better handling for not running cardmgr
- many times
- (configure_pcmcia): always run cardmgr so that it is run even if stage1
- did create a /var/run/stab. This is just a try :-/
-
-2001/04/12 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: if neuneu but explicited clicked, don't skip
- corrected pcmcia driver
-
-2001/04/12 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: removed Cancel of Summary.
- fixed ask printer configuration.
-
- * common.pm: improved bestMatchSentence2.
-
- * detect_devices.pm: fix Hewlett-Packard to HP in case.
-
- * standalone/printerdrake: never ask to configure a printer in standalone.
-
- * printerdrake.pm: automatically add a queue if nothing exists.
- fixed ask to configure a printer.
-
- * interactive.pm: removed strict die on empty list.
-
- * modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
- packdrake.
-
-2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: add some rule so later on tinyfirewall will not
- prevent everything from working
-
- * share/po/fr.po: write some ppc translations
- un-dadouize a problem
-
-2001/04/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: Updated Italian file
-
-2001/04/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): fix no advertising with less
- than 20MB of packages
-
- * interactive.pm (ask_from_entries_refH_powered_normalize):
- - when not_edit and empty list, die.
- - when not_edit and single element list, don't display that entry.
-
- * install_steps_interactive.pm (configureX): fix for X test at install
- with exotic fonts
-
- * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
- * modules.pm (configure_pcmcia): better handling for not running cardmgr
- many times
- (configure_pcmcia): always run cardmgr so that it is run even if stage1
- did create a /var/run/stab. This is just a try :-/
-
-2001/04/12 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: corrected typo
- added use bootloader
-
- * standalone/net_monitor: typo
-
- * netconnect.pm: if neuneu but explicited clicked, don't skip
- corrected pcmcia driver
- corrected typo
-
- * lang.pm: pixel sux
-
- * network.pm, standalone/draknet: corrected network connection
-
- * my_gtk.pm: corrected set_modal
-
-2001/04/12 fabman
-
- * share/po/es.po: updated spanish .po files
-
-2001/04/12 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: removed Cancel of Summary.
- fixed ask printer configuration.
-
- * common.pm: improved bestMatchSentence2.
-
- * detect_devices.pm: fix Hewlett-Packard to HP in case.
-
- * standalone/printerdrake: never ask to configure a printer in standalone.
-
- * printerdrake.pm: automatically add a queue if nothing exists.
- fixed ask to configure a printer.
-
- * modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
- packdrake.
-
-2001/04/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: un-dadouize a problem
- sync
-
-2001/04/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
- share/po/zh_CN.GB2312.po, share/po/es.po, share/po/fr.po,
- share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po,
- share/po/sk.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
- share/po/ko.po, share/po/eo.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/da.po, share/po/is.po, share/po/zh_TW.Big5.po,
- share/po/id.po: Updated Chinese file
-
- * share/po/it.po: Updated Italian file
- Updated Chinese file
-
-2001/04/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): fix no advertising with less
- than 20MB of packages
-
- * interactive.pm (ask_from_entries_refH_powered_normalize):
- - when not_edit and empty list, die.
- - when not_edit and single element list, don't display that entry.
-
- * install_steps_interactive.pm (configureX): fix for X test at install
- with exotic fonts
-
- * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
- * modules.pm (configure_pcmcia): better handling for not running cardmgr
- many times
- (configure_pcmcia): always run cardmgr so that it is run even if stage1
- did create a /var/run/stab. This is just a try :-/
-
-2001/04/12 siegel
-
- * share/po/de.po: new german version
-
-2001/04/12 yduret
-
- * bootlook.pm: added some stuff
-
-2001/04/11 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/12 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: corrected typo
- added use bootloader
-
- * netconnect.pm: corrected typo
-
-2001/04/12 fabman
-
- * share/po/es.po: updated spanish .po files
-
-2001/04/12 siegel
-
- * share/po/de.po: new german version
-
-2001/04/11 dam's <damien@mandrakesoft.com>
-
- * share/themes-mdk.rc: tooltips
-
- * netconnect.pm: updated
-
- * my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (reallyChooseGroups): relook
-
- * install_steps_interactive.pm (chooseGroups): warn if chosen size is too
- big
-
- * share/compssUsers: adapt for new profile choosing layout
-
-2001/04/11 yduret
-
- * bootlook.pm: bug fix in autologin
-
-2001/04/11 dam's <damien@mandrakesoft.com>
-
- * share/themes-mdk.rc: tooltips
-
- * bootlook.pm: updated
- corrected
-
- * tinyfirewall.pm: installation of package : not at the same place
-
- * netconnect.pm: updated
- added driver for pcmcia, corrected eth conf for pppoe
-
-2001/04/11 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: added missing LD_LOADER for calling rpm.
-
- * printerdrake.pm: fixed probe on kernel 2.4.
- make printer devices more accurate.
- removed limitation to only one port probed
-
- * pkgs.pm: added missing use of LD_LOADER for starting parsehdlist on
- upgrade.
-
- * detect_devices.pm: avoid need of shell for live upgrade on serial_probe
- (removed 2>/dev/null which
- is not necessary).
- fixed printer probe (usb and parallel).
-
- * mouse.pm: fix wacom usb tablet
-
- * standalone/printerdrake: added missing take into account of
- /etc/modules.conf
-
- * lang.pm: added missing LD_LOADER reference and remove old code
- commented.
-
-2001/04/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: unfuzzyize
- sync with new msg in services.pm and compssUsers
- sync with pablo update
- fixes of translations
- write the shitload of untranslated and fuzzy msg
-
- * standalone/tinyfirewall: i18n title
-
- * services.pm: have many more services tooltipped from here so we can get
- translations afterwards
-
- * share/compssUsers: fix typos of rpmsrate groups
-
- * standalone/drakgw: kosmetik
- do i18n for title also
-
-2001/04/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/rpmsrate: Added reference to netscape-chinese_big5 file
-
- * share/po/DrakX.pot, share/po/wa.po: Updated Walloon file
- Updated po files
- Updated Slovak, Walloon and Polish files
-
- * share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
- share/po/ko.po, share/po/ja.po, share/po/is.po, share/po/zh_TW.Big5.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/zh_CN.GB2312.po, share/po/sk.po, share/po/vi.po,
- share/po/ca.po, share/po/cs.po: Updated po files
- Updated Slovak, Walloon and Polish files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/ga.po,
- share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/hu.po,
- share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/af.po: Updated po files
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * run_program.pm (rooted): don't call install_any::check_prog if rooted
-
- * standalone/drakboot: make it work (why was bootloader::install
- commented?)
-
- * share/compssUsers: adapt for new profile choosing layout
-
- * Makefile: take cardmgr-*
-
- * install_steps_interactive.pm (chooseGroups): warn if chosen size is too
- big
- translate the ``path'' in profile selection
-
- * share/po/i18n_compssUsers: relooking
-
- * any.pm (setupBootloader): translate the bootloaders to use
- (setupBootloader): nicer look&feel
-
- * install_any.pm (fsck_option): add a closing ``"'' so that strings to
- i18n extraction works
- (fsck_option): add a closing ``"'' so that strings to i18n extraction
- works
- (check_prog): make it work
-
- * install_steps_gtk.pm (reallyChooseGroups): relook
- (installPackages): pressing "Details" gives you more detailed info
- (reallyChooseGroups): start relooking
- (installPackages): don't display advertising if less 20MB of packages
- translate the ``path'' in profile selection
-
-2001/04/11 warly
-
- * share/compssUsers: Add descr for servers
-
-2001/04/11 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: make printer devices more accurate.
- removed limitation to only one port probed
-
- * mouse.pm: fix wacom usb tablet
-
- * standalone/printerdrake: added missing take into account of
- /etc/modules.conf
-
- * detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * services.pm: have many more services tooltipped from here so we can get
- translations afterwards
-
- * share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
- * share/compssUsers: fix typos of rpmsrate groups
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * run_program.pm (rooted): don't call install_any::check_prog if rooted
-
- * diskdrake.pm (More): fix exception relaunching
-
- * install_any.pm (check_prog): make it work
-
- * any.pm (setupBootloader): nicer look&feel
-
- * standalone/drakboot: make it work (why was bootloader::install
- commented?)
-
- * Makefile: take cardmgr-*
-
-2001/04/11 fabman
-
- * share/po/es.po: updated spanish .po file
-
-2001/04/11 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: make printer devices more accurate.
- removed limitation to only one port probed
-
- * mouse.pm: fix wacom usb tablet
-
- * standalone/printerdrake: added missing take into account of
- /etc/modules.conf
-
- * detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
- - completly remove po's (will be getFile'd)
- - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
- * standalone/drakboot: make it work (why was bootloader::install
- commented?)
-
- * share/aliases: add rmmod -> insmod_
-
- * lang.pm (get_x_fontset): special cases for some big (size) fonts
-
- * Makefile: take cardmgr-*
-
- * install_any.pm (check_prog): make it work
- (check_prog): if a prog isn't available, try to fetch it via getFile
- (remove_bigseldom_used): created, purpose: remove unneeded stuff on
- stage2
- to allow a getAndSaveFile.
- (getAndSaveFile): if only one arg is given, assume the name is the same
-
- * standalone/XFdrake: fix bug for running xfs
-
- * any.pm (setupBootloader): nicer look&feel
-
- * diskdrake.pm (More): fix exception relaunching
- check resize_reiserfs is there or get it
-
- * run_program.pm (rooted): don't call install_any::check_prog if rooted
- in install, call install_any::check_prog to allow shadow progs which are
- fetched when needed via getFile
-
- * share/list: remove rmmod (is now a symlink)
-
-2001/04/11 siegel
-
- * share/po/de.po: updated german version
-
-2001/04/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ca.po: Updated Catalan file
-
-2001/04/10 Pixel <pixel@mandrakesoft.com>
-
- * Makefile:
- - fix wiz_*.png removing
- - fix copying cardmgr* which included cardmgr.o
-
-2001/04/11 Pixel <pixel@mandrakesoft.com>
-
- * tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
- - completly remove po's (will be getFile'd)
- - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
- * standalone/XFdrake: fix bug for running xfs
-
- * diskdrake.pm: check resize_reiserfs is there or get it
-
- * share/aliases: add rmmod -> insmod_
-
- * install_any.pm (check_prog): if a prog isn't available, try to fetch it
- via getFile
- (remove_bigseldom_used): created, purpose: remove unneeded stuff on
- stage2
- to allow a getAndSaveFile.
- (getAndSaveFile): if only one arg is given, assume the name is the same
-
- * share/list: remove rmmod (is now a symlink)
-
- * run_program.pm: in install, call install_any::check_prog to allow shadow
- progs which are
- fetched when needed via getFile
-
- * lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-2001/04/10 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad network restart
-
- * my_gtk.pm: corrected bad font
-
- * network.pm: get rid of ifcfg-
- minor correction
-
-2001/04/10 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: fixed selection of CDs.
-
- * devices.pm: added input/event class of devices (necessary for usb wacom
- at install)
-
-2001/04/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
- mdk-stage1/mkinitrd_helper/Makefile:
- - honour quiet mode at boot time
- - fake modprobe to shut up kmod
-
- * bootlook.pm: do not use french in i18n'ed msg yvounet!!
-
- * standalone/drakgw: add INTERFACE param in sysconfig parameter for smooth
- interoperation with bastille-firewall
-
-2001/04/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po: Updated Czech file
- Updated po files
-
- * share/po/ko.po, share/po/ja.po, share/po/id.po, share/po/vi.po: Updated
- Indonesian, Japanese, Korean and Vietnamese files
- Updated po files
-
- * share/po/DrakX.pot, share/po/wa.po, share/po/fi.po: Added a missing
- translatable string
- Updated po files
-
- * share/po/ca.po: Updated Catalan file
- Updated po files
-
- * share/locales.tar.bz2: Added missing file for Vietnamese
-
- * share/po/bg.po: Updated Bulgarian file
- Updated po files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
- share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po,
- share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po,
- share/po/nl.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files
-
-2001/04/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm: use gtkset_tip (so that no tip is set when tip eq
- '')
- (create_boxradio): handle double_click
- (ask_from_entries_refW): use radio boxes instead of list/clist if small
- number
- of choices
- (create_ctree): handle single click on node opens the node
-
- * my_gtk.pm: create and use gtkset_tip
- (_create_window): XSetInputFocus done only on expose_event of the
- topmost window
- (new): ensure only one modal
-
- * Xconfigurator.pm (main): have an "Ok" button to leave
-
- * install_steps_gtk.pm: use gtkset_tip
- (choosePackagesTree): fix "Show automatically selected packages"
- create and use gtkset_tip
-
- * Makefile:
- - fix wiz_*.png removing
- - fix copying cardmgr* which included cardmgr.o
-
-2001/04/10 warly
-
- * share/rpmsrate: add viavoicemenu_{us,gr,fe}
-
-2001/04/10 yduret
-
- * bootlook.pm: grub/lilo mode
-
-2001/04/10 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad network restart
-
- * my_gtk.pm: corrected bad font
-
- * network.pm: get rid of ifcfg-
- minor correction
-
-2001/04/09 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: typo
-
-2001/04/09 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
- size as the check is done before rounding.
-
- * bootloader.pm (install_grub): altconfigfile only if /boot is not
- reiserfs :-/
-
- * tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
- modules.cz)
-
- * install_any.pm (setPackages): also have SOUND set in compssUsersChoice
- based on pciusbtable
-
- * share/compssUsers, share/rpmsrate:
- - SOUND is now a flag
- - AUDIO is the group
-
-2001/04/09 siegel
-
- * tinyfirewall.pm: i18n fixes
-
-2001/04/09 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixes of grub installation using hd.img
- fix the fix for loopback mounting of hd.img.
-
- * Xconfigurator.pm: fixed always 8bpp for autoDefaultDepth.
-
- * pkgs.pm: changed transaction error management this way: if a transaction
- fails, DrakX
- tries to make as many transaction as there are package that have failed
- to be
- installed (this means one transaction of only one package). This help
- installing
- most package that are correct (as a transaction that failed cause all
- remaining
- package to be not installed).
-
-2001/04/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: 8.0rc -> 8.0
-
- * rescue/tree/etc/oem: fix english thanks to Kevin
-
- * standalone/drakgw: do not die when an initscript returns non-0
- (initscripts too buggy)
-
-2001/04/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Danish file
-
- * any.pm: changed ISO_8859-1 TO ISO-8859-1
-
-2001/04/09 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
- use it for kdm message
-
- * diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
- size as the check is done before rounding.
-
- * bootloader.pm (install_grub): altconfigfile only if /boot is not
- reiserfs :-/
-
- * tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
- modules.cz)
-
- * install2.pm (main): sets umask (seems like default one is no more 022,
- kernel change?)
-
- * Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
- (especially for abnt2 (br))
-
- * install_any.pm (setPackages): also have SOUND set in compssUsersChoice
- based on pciusbtable
-
- * share/compssUsers, share/rpmsrate:
- - SOUND is now a flag
- - AUDIO is the group
-
- * lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09 siegel
-
- * share/po/de.po: fixes
-
- * Xconfigurator.pm: fixed i18n bug
-
-2001/04/09 yduret
-
- * standalone/tinyfirewall: button policy (thx gc)
-
- * standalone/drakgw: deyvounification : remove some un-useful comments in
- code
-
-2001/04/09 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: corrected
-
- * standalone.pm: install function now returns the return value of the
- system.
-
- * netconnect.pm: corrected buggy cable
- removed buggy modem screen repetition
-
-2001/04/09 François Pons <fpons@mandrakesoft.com>
-
- * standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
- applied).
- fixed cancel support.
- added conditional restart of gpm on mouse configuration change.
-
- * fs.pm: removed notail option for reiserfs.
-
- * standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
- DrakConf only).
-
- * install_any.pm: added missing package to copy.
-
- * rescue/tree/etc/oem: fixes of grub installation using hd.img
- fix the fix for loopback mounting of hd.img.
- fixed hd.img access right.
- make kernel22 installed for every oem install...
- moved some package to closure instead of installed.
- added some missing packages.
- added nolock option for nfsmount.
- added missing package to copy.
-
-2001/04/09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: fix Traktopel Maxim thanks to Kevin Lawton
-
- * mdk-stage1/Makefile: 8.0beta -> 8.0rc
-
- * standalone/drakgw: fix for when there is an already existing rc.firewall
- complies with old format of drakgw so that upgrades will work
-
- * rescue/tree/etc/oem: fix english thanks to Kevin
-
-2001/04/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * any.pm: changed ISO_8859-1 TO ISO-8859-1
-
-2001/04/09 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
- use it for kdm message
-
- * interactive.pm (ask_from_treelistf): make it behaves correctly when
- "cancel" is clicked
-
- * Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
- (especially for abnt2 (br))
-
- * install2.pm (main): sets umask (seems like default one is no more 022,
- kernel change?)
- (main): log the umask
-
- * devices.pm (entry): add hd[ijkl]*
-
- * bootloader.pm (install_lilo): better handling of map-drive (there's not
- always only 2 disks!)
-
- * lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09 siegel
-
- * share/po/de.po: fixes
-
-2001/04/09 yduret
-
- * standalone/drakboot: added lilo/grub
-
- * bootlook.pm: added lilo/grub mode
-
-2001/04/09 dam's <damien@mandrakesoft.com>
-
- * modules.pm: removed use install_any
-
- * tinyfirewall.pm: corrected
-
- * netconnect.pm: corrected buggy cable
- removed buggy modem screen repetition
- corrected bad bug when creating new profile
-
- * standalone.pm: install function now returns the return value of the
- system.
-
- * Makefile: removed install_any
-
-2001/04/09 François Pons <fpons@mandrakesoft.com>
-
- * standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
- applied).
- fixed cancel support.
- added conditional restart of gpm on mouse configuration change.
-
- * rescue/tree/etc/oem: fixed hd.img access right.
- make kernel22 installed for every oem install...
- moved some package to closure instead of installed.
- added some missing packages.
- added nolock option for nfsmount.
- added missing package to copy.
-
- * fs.pm: removed notail option for reiserfs.
-
- * standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
- DrakConf only).
-
- * printer.pm: added Till patch for printer (raw queue and PostScript
- queue).
-
- * install_any.pm: added missing package to copy.
-
-2001/04/09 kjx
-
- * share/po/zh_CN.GB2312.po: translate before 8.0 release
-
-2001/04/09 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): log the umask
-
- * interactive.pm (ask_from_treelistf): make it behaves correctly when
- "cancel" is clicked
-
- * devices.pm (entry): add hd[ijkl]*
-
- * bootloader.pm (install_lilo): better handling of map-drive (there's not
- always only 2 disks!)
-
-2001/04/09 yduret
-
- * bootlook.pm: fix, added lilo/grub frame
- fixed till bug
-
-2001/04/08 dam's <damien@mandrakesoft.com>
-
- * rescue/tree/etc/oem, rescue/tree/etc/closurepkgs, install_any.pm: get
- rid of kisdn
-
- * tinyfirewall.pm: updated
- added package installation
-
- * netconnect.pm: get rid of kisdn
- updated
- no more askwarn in wizard mode
- updated
-
- * standalone/tinyfirewall, standalone/drakgw, my_gtk.pm,
- netconnect_consts.pm: updated
-
- * standalone/net_monitor: removed Data::Dumper
- typo
-
- * standalone/draknet: updated
- typo
- corrected bad isdn field
-
-2001/04/08 daouda
-
- * share/rpmsrate: increase quanta weight .
-
-2001/04/08 fabman
-
- * share/po/es.po: updated spanish .po files
-
-2001/04/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: correct my mistakes on removing some modules from stage1 and
- stage2 (-> remove only from stage1)
-
-2001/04/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/compssUsers.desktop, standalone/draknet: Fixed some english typos
-
- * standalone/net_monitor, netconnect.pm: Some English changes
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Fixed some english typos
- Updated pot file and various po files
-
-2001/04/08 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (write): remove debugging info :-(
-
- * bootloader.pm (suggest): add option "quiet" to the kernel in fb
- (requested by chmou)
-
- * install_steps.pm (afterInstallPackages): remove setting of kde charset
- in kdeglobals (kde is a grown-up now)
-
-2001/04/08 siegel
-
- * share/po/de.po: new german version
- updates
-
-2001/04/07 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: typo
- typo
- net_monitor incorporation
-
- * standalone/net_monitor, Makefile.config: net_monitor incorporation
-
-2001/04/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po: updated Croatian files
-
- * share/po/wa.po, share/po/sr.po, share/po/sp.po, share/po/DrakX.pot,
- share/po/ko.po, share/po/it.po: Updated Korean, Italian, Serbian and
- Walloon files
-
-2001/04/07 warly
-
- * share/compssUsers: PCL-CVS release v2_9_9
- Repository : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
- Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
- In directory .:
- Modified compssUsers
- In directory po:
- patched Up-To-Date po/DrakX.pot
- patched Up-To-Date po/ca.po
- patched Up-To-Date po/de.po
- patched Up-To-Date po/hr.po
- patched Up-To-Date po/id.po
- patched Up-To-Date po/it.po
- patched Up-To-Date po/ja.po
- patched Up-To-Date po/ko.po
- patched Up-To-Date po/sp.po
- patched Up-To-Date po/sr.po
- patched Up-To-Date po/vi.po
- patched Up-To-Date po/wa.po
-
- --------------------- End ---------------------
- -- last cmd: cvs -f update -d -P --
-
- * share/rpmsrate: PCL-CVS release v2_9_9
- Repository : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
- Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
- In directory .:
- Modified rpmsrate
-
- --------------------- End ---------------------
- -- last cmd: cvs -f update -d -P --
-
-2001/04/06 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-
-2001/04/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: use jeff's suggestions to remove some old stuff
- Sun Happy Meal only for Sparc
-
- * mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-
- - do not print warning when we are in AUTOMATIC and insmod failed
- because of file-not-found in mar file (raid cards, etc)
- - print "please include msg from Alt-F3" for this warning message to
- ease further support
- - print pci entry of cards found in te logs
-
- * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
- mdk-stage1/mkinitrd_helper/Makefile: steal raid_autorun from rh
-
-2001/04/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ca.po, share/po/id.po: Updated Catalan and Indonesian files
-
- * share/po/ja.po, share/po/vi.po: Updated Japanese and Vietnamese files
-
-2001/04/06 siegel
-
- * share/po/de.po: updates
-
-2001/04/06 yduret
-
- * standalone/drakgw: swap cancel/configure button
-
-2001/04/06 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet2: dead code
-
- * standalone/net_monitor: updated
-
- * netconnect.pm: be quiet
-
-2001/04/06 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
- fixed if label does not exists and grub refuse to read.
-
- * install_steps_interactive.pm: fixed typo for cups checking of
- installation.
- fixed "No printer" after configuring cups for remove server.
- added log for CD medium chosen par user.
-
- * pkgs.pm: added killing on child process of transaction that have been
- detached (typically
- with pid > transaction_pid and parent is 1).
-
-2001/04/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw:
- - correct yvounetification in i18n stuff
- - remove some remaining debugging printings
- - add a bit more of explanations when starting drakgw in wizard mode
-
- * modules.pm: re integrate some TR net cards
-
- * mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-
- - do not print warning when we are in AUTOMATIC and insmod failed
- because of file-not-found in mar file (raid cards, etc)
- - print "please include msg from Alt-F3" for this warning message to
- ease further support
- - print pci entry of cards found in te logs
-
-2001/04/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Thai file
- Updated pot file
-
-2001/04/06 yduret
-
- * standalone/drakgw: swap cancel/configure button
-
-2001/04/06 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: addde tk like routines
-
- * netconnect.pm: be quiet
- correctedInternetAccessTye and ADSLType
-
- * Makefile: iCorrected missing file install_any.pm. pixel sux.
-
- * standalone/draknet2: dead code
-
- * standalone/net_monitor: updated
- updated
- updated
- updated
- updated
- added
-
- * pixmaps/net_d.png, pixmaps/net_c.png: added
-
- * share/logo-mandrake.png: new icon
-
-2001/04/06 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: fixed if label does not exists and grub refuse to
- read.
-
- * install_steps_interactive.pm: fixed typo for cups checking of
- installation.
- fixed "No printer" after configuring cups for remove server.
- added log for CD medium chosen par user.
-
- * pkgs.pm: added killing on child process of transaction that have been
- detached (typically
- with pid > transaction_pid and parent is 1).
-
-2001/04/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Thai file
- Updated pot file
-
-2001/04/06 Pixel <pixel@mandrakesoft.com>
-
- * tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
- every modules.cz except the
- biggest one
-
- * install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
- and use it
-
- * install_any.pm: add write_fstab
- create install_any::write_fstab and use it
-
-2001/04/06 yduret
-
- * bootlook.pm: minor fix
-
- * standalone/drakgw: recoded a embedded && gtk mode
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (fs_options): created (gets codepage and iocharset)
-
- * common.pm (if_): better logging of the error
-
-2001/04/06 Pixel <pixel@mandrakesoft.com>
-
- * tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
- every modules.cz except the
- biggest one
-
- * install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
- and use it
-
- * install_any.pm: add write_fstab
- create install_any::write_fstab and use it
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakboot:
- - fix getting result of fsedit::hds
- - cleanup
-
- * lang.pm (fs_options): created (gets codepage and iocharset)
-
- * common.pm (if_): better logging of the error
- (getVarsFromSh): fix for AA="" inspired by chmou the Great (but the
- Great
- what?)
-
- * bootloader.pm (install_grub): small fix
- (install_lilo): fix lilo's dumbness (when lilo warns about not the first
- drive, it usually fails)
-
- * diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
- * install_steps_interactive.pm (addUser): default autologin to first user
- in beginner
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (autologin): fix
- ask for autologin
-
- * install_steps_interactive.pm: ask for autologin
- (generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
- was used. Better have a look at /proc/cmdline
-
- * bootloader.pm (install_lilo): fix lilo's dumbness (when lilo warns about
- not the first drive, it usually fails)
-
- * pkgs.pm, share/rpmsrate:
- - s/PCI/HW/
- - add rio500
-
- * install_any.pm (kernelVersion): fix enormous stupid typo
-
- * common.pm (getVarsFromSh): fix for AA="" inspired by chmou the Great
- (but the Great
- what?)
-
- * install_steps.pm (exitInstall): oups, report_bug is no more in
- commands::
-
- * diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
- automatically selected
- packages' to go along with the new description
-
- * Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
- (otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
- * install_any.pm (kernelVersion): fix enormous stupid typo
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * install_steps.pm (exitInstall): oups, report_bug is no more in
- commands::
- (configureXBefore): fix the xkb verification (was broken for things like
- ``de(nodeadkeys)'')
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * any.pm: ask for autologin
-
- * fs.pm (format_reiserfs): quietly format reiserfs
-
- * commands.pm:
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * install_steps_interactive.pm: ask for autologin
- (generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
- was used. Better have a look at /proc/cmdline
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * share/rpmsrate:
- - add ldetect
- - the default Aurora chose is the categorizing one
-
-2001/04/05 siegel
-
- * share/po/de.po: fixed typo
-
-2001/04/05 yduret
-
- * bootlook.pm: fix pablo mess
- install autolgin just if we want to autolog :)
-
-2001/04/05 dam's <damien@mandrakesoft.com>
-
- * ChangeLog, bootloader.pm: readded passwd. Must verify that it's secure
- vs msec.
-
- * my_gtk.pm: added gtksize
-
-2001/04/05 fcrozat
-
- * share/rpmsrate: No longer propose nautilus-mozilla (required by
- nautilus)
- propose nautilus-trilobite (for Eazel services)
-
-2001/04/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
- automatically selected
- packages' to go along with the new description
-
- * commands.pm, install_steps_interactive.pm, install_any.pm:
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
- * fs.pm (format_reiserfs): quietly format reiserfs
-
- * Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
- (otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
- * share/rpmsrate:
- - add ldetect
- - the default Aurora chose is the categorizing one
-
- * install_steps.pm (configureXBefore): fix the xkb verification (was
- broken for things like ``de(nodeadkeys)'')
- - move report_bug in install_any
- - g_auto_install generates the auto_inst.cfg string without output'ing
- it
-
-2001/04/05 siegel
-
- * share/po/de.po: fixed typo
-
-2001/04/05 yduret
-
- * bootlook.pm: fix pablo mess
- install autolgin just if we want to autolog :)
-
-2001/04/04 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: make sure to insmod parport_probe alone as it is not
- available in 2.4 kernel and
- this this not a problem (silent error).
- added complete callback to check queue name under cups does contains
- only letters, numerics or underscore.
-
- * install_steps_interactive.pm: fixed printer description in summary.
-
- * install2.pm: added selectPackagesToUpgrade the first time choosePackages
- is called.
-
- * Xconfigurator.pm: removed limitation to 24 bits for SiS card, make sure
- to remove 32 bits depth
- for such card.
-
- * detect_devices.pm: fixed parport probe for printer under 2.4 kernel.
-
- * diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
- some times.
-
- * printer.pm: added die on error of lpadmin.
-
- * install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sk.po, share/po/az.po: Updated Azeri and Slovak files
-
-2001/04/04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (tv): add ultracam & usbvideo
- (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
- skip them
- (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
- skip them
-
- * install_any.pm (kernelVersion): cleanup
-
-2001/04/04 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_any.pm: kernelVersion mods for PPC
-
-2001/04/04 daouda
-
- * share/rpmsrate: add gatos for ati tv card .
-
-2001/04/04 Frederic Lepied <flepied@mandrakesoft.com>
-
- * share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04 François Pons <fpons@mandrakesoft.com>
-
- * live_install: unset locale environment for safety
-
- * detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
- (needed for live upgrade so
- that error message are not printed)
-
- * diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
- some times.
-
- * install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
- * any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
- * install2.pm: added selectPackagesToUpgrade the first time choosePackages
- is called.
-
- * install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (setPackages): better handling for tv, photo and scanner
-
- * modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
- stage1, so skip them
- - add photo, tv and scanner
- - add pegasus and kaweth modules
-
-2001/04/04 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: typo
-
-2001/04/04 daouda
-
- * share/rpmsrate: add gatos for ati tv card .
- reput klyx but in lower weight (2)
- removed klyx from rpmsrate (bad idea according to pixel )
- add klyx in install "Office KDE"
-
-2001/04/04 François Pons <fpons@mandrakesoft.com>
-
- * live_install: unset locale environment for safety
-
- * detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
- (needed for live upgrade so
- that error message are not printed)
-
- * install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
- * any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
- * install2.pm: added selectPackagesToUpgrade the first time choosePackages
- is called.
-
- * install_steps.pm: disable frame buffer for Matrox cards.
-
- * install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (setPackages): better handling for tv, photo and scanner
-
- * modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
- stage1, so skip them
- - add photo, tv and scanner
- - add pegasus and kaweth modules
-
- * share/compssUsers: remove TV (it is a hardware flag)
-
-2001/04/03 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: keep mount point configuration trhough multi-passes of
- diskdrake and others.
-
- * Xconfigurator.pm: prefer XF3 for SiS card.
-
-2001/04/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sr.po, share/po/sp.po, share/po/ko.po: Updated Korean file
-
-2001/04/03 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: do not use isSpecial which should only be used on
- partitions
- (main): do not have loopback pseudo hd in hds out of diskdrake
-
- * modules.pm (load_raw): add the require install_any
-
- * share/rpmsrate: restore Aurora (i really don't understand what i've done
- with flag AURORA a month ago) to a simple behaviour
-
- * install_steps_interactive.pm (choosePackages): do not make a special
- case for upgrades (was: select the
- min size, which was on contradiction with profile selection)
-
- * fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
- * standalone/mousedrake: fix horrible error (using an undefined $o)
-
- * share/list: add back mkreiserfs
-
- * standalone/XFdrake: don't start xfs if skiptest
-
- * fsedit.pm (get_fstab): restore loopback::loopbacks because hds contains
- only true
- hard drives (not pseudo one like raid, loopback and lvm)
-
- * bootloader.pm (suggest): trap strange error. Should not really fix the
- pb
-
- * install_steps.pm (setupBootloaderBefore): nicer Aurora presence
- detetection
-
- * lang.pm (charset): fix for chineese which have charset in the name
-
- * Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
- * install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
- dependencies"
-
- * install_any.pm (setPackages): don't preselect profiles in upgrade
- (setPackages): handle Flag:<theflag>
- (setPackages): install kernel22 if install kernel is a 2.2
-
- * lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
- (didn't
- propose to format it)
- protect the loading of module lvm-mod
-
-2001/04/03 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_steps_interactive.pm, mouse.pm: PPC keyboard/mouse button
- emulation
-
-2001/04/03 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: a lot of bugfixs
- corrected bad flag test
- corrected bad priority
-
- * standalone/draknet: typo
- bug fixes
- removed debugging messages and Data::Dumper
- corrected bad flag test
-
-2001/04/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/vi.po, share/po/DrakX.pot: Updated Vietnamese file
-
-2001/04/03 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (load_raw): add the require install_any
-
- * share/rpmsrate: restore Aurora (i really don't understand what i've done
- with flag AURORA a month ago) to a simple behaviour
-
- * lang.pm (charset): fix for chineese which have charset in the name
-
- * install_steps.pm (setupBootloaderBefore): nicer Aurora presence
- detetection
-
- * Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
- * install_steps_interactive.pm (choosePackages): do not make a special
- case for upgrades (was: select the
- min size, which was on contradiction with profile selection)
-
- * fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
- * install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
- dependencies"
-
- * install_any.pm (setPackages): don't preselect profiles in upgrade
- (setPackages): handle Flag:<theflag>
- (setPackages): install kernel22 if install kernel is a 2.2
-
- * share/list: add back mkreiserfs
-
- * standalone/XFdrake: don't start xfs if skiptest
-
- * lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
- (didn't
- propose to format it)
- protect the loading of module lvm-mod
-
-2001/04/02 dam's <damien@mandrakesoft.com>
-
- * modules.pm: corrected petite's mistake
-
- * netconnect.pm: protecting against non existent files
-
-2001/04/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/make_boot_img, mdk-stage1/.cvsignore: fix
- comply to all.kernels policy
-
- * tools/make_mdkinst_stage2: fix remove of alternate cz modules
-
-2001/04/02 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/cs.po: Updated Czech file
-
- * lang.pm: codepage option to mount requires only numeric values, eg "437"
- and not "cp437"
- Changed accordingly in the lists
-
- * share/rpmsrate: Install latin2 Postscript fonts for latin2 locales,
- install fonts-ttf-thai for Thai locale
-
-2001/04/02 Pixel <pixel@mandrakesoft.com>
-
- * c/Makefile: small cleanup for pcmcia_probe.c
-
- * tools/Makefile (install): s/-r/-rf/
-
- * install_any.pm (setPackages): s/reiserfs-utils/reiserfsprogs/
- (setPackages): install imwheel if nbuttons > 3
-
- * c/Makefile.PL: small cleanup for pcmcia_probe.c
- don't use pcmcia_probe.o from stage1, better compile it here, otherwise
- perl-install require mdk-stage1 to do compiled => circular dependency
-
- * Makefile: ignore dams or at least dams errors
-
- * c/.cvsignore: add pcmcia_probe.c
-
-2001/04/02 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/make_rescue_img: fix pixelization (aka take advantage of
- all.kernels/.main)
-
-2001/04/02 Pixel <pixel@mandrakesoft.com>
-
- * tools/Makefile (install): s/-r/-rf/
-
-2001/03/30 Pixel <pixel@mandrakesoft.com>
-
- * tools/Makefile (install): fix the globbing for packdrake.pm and
- rpmtools.pm
-
-2001/03/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/drvinst: test for "Card:" and not install, some videoboards are
- not reported as DISPLAY_VGA :-(
-
- * tools/make_mdkinst_stage2, docs/HACKING, rescue/make_rescue_img,
- mdk-stage1/pci-resource/update-pci-ids.pl, docs/README: support more
- than one boot kernel :-)
-
- * rescue/list.i386: add reiserfsck
-
-2001/03/29 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: bad message at the end if kernel2.4
-
- * netconnect.pm: added missing Device in Ethx when saving/loading
-
- * standalone/draknet: translation
-
-2001/03/28 dam's <damien@mandrakesoft.com>
-
- * standalone/tinyfirewall: typo
-
- * interactive_gtk.pm: corrected pixel shit if embedded
-
- * standalone/draksec: embedded mode
-
- * standalone/draknet: corrected gtkpng in gtkwpm
- added translation
-
- * bootlook.pm: cute button box
-
- * tinyfirewall.pm: workaround to make it work if kernel 2.4
-
-2001/03/28 fcrozat
-
- * share/rpmsrate: gmc is back in standard GNOME install, for people with
- existing home
-
-2001/03/28 François Pons <fpons@mandrakesoft.com>
-
- * standalone/mousedrake, mouse.pm, standalone/XFdrake: fixed for
- standalone XFdrake and mousedrake (multi-mouse and
- correct probe (USB)).
-
- * Xconfig.pm: re-fix mouse fix.
- fixed wrong mouse probe.
- fixed for standalone XFdrake and mousedrake (multi-mouse and
- correct probe (USB)).
-
- * Xconfigurator.pm: restore multi mouse support for XF3.
-
-2001/03/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/ca.po, share/po/tr.po: Updated Catalan, Danish,
- Finnish, Croatian and Turkish files
-
- * share/po/sk.po, share/po/ko.po: Updated Finnish, Korean and Slovak files
-
- * share/po/az.po: Updated Azeri and Danish files
-
- * share/po/fi.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
- files
- Updated Finnish, Korean and Slovak files
-
- * share/po/da.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
- files
- Updated Azeri and Danish files
-
-2001/03/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: add fstab in the log
-
- * interactive_gtk.pm: better default_size setting
-
- * commands.pm: fix typo
- add fstab in the log
-
- * install_gtk.pm (test_mouse): ensure the test mouse is not too big
-
-2001/03/28 warly
-
- * share/rpmsrate: add some commercial apps
-
-2001/03/27 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: added kill USR2 before main
-
- * share/help.png: changed help button
-
- * share/help.xpm: changed help
-
- * tinyfirewall.pm: workaround to make it xork.
-
-2001/03/27 François Pons <fpons@mandrakesoft.com>
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
- * Xconfigurator.pm: fixed mouse support for XF3, only one mouse supported
- currently.
-
-2001/03/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/i18n_compssUsers, share/po/vi.po, share/po/fi.po,
- share/po/br.po, share/po/DrakX.pot, share/po/ko.po, share/po/ja.po,
- share/po/wa.po, share/po/de.po, share/po/id.po: Updated Vietnamese,
- Indonesian, Japanese, Korean and Walloon files
- changed i18n_compssUsers to make "path" i18n'able
-
-2001/03/27 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: warnAboutNaughtyServers
- (setPackages): default profiles selection to GNOME, KDE, CONFIG
-
- * install_steps_interactive.pm: warnAboutNaughtyServers
- (summary): fix displaying of printer configured
-
- * pkgs.pm: warnAboutNaughtyServers
-
- * install_steps_gtk.pm (installPackages): catch the no png file exception
- (in case warly is dumb again)
-
- * my_gtk.pm: try to fix displaying in draksec
- (create_box_with_title): save the box_size in field "box_size"
-
- * install2.pm, any.pm: remove use of Bastille. get back to the good state
- we had :)
-
- * interactive_gtk.pm: try to fix displaying in draksec
-
- * share/rpmsrate: move back Bastille-Curses-module to CONFIG
- - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
- LOCALES"zh"
- - raise WindowMaker
- - add xfce
- - am-utils is a server
- - raise some stuff in CONFIG to have stuff there
- - remove drakxtools from CONFIG (DrakConf requires drakxtools)
- - DrakConf from 5 to 4
-
- * lang.pm (langsLANGUAGE): give the list of languages
-
-2001/03/27 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_steps_interactive.pm: change verbage on bootloader warning
-
-2001/03/27 siegel
-
- * share/po/de.po: minor typo-fixes
-
-2001/03/27 dam's <damien@mandrakesoft.com>
-
- * share/help.png: changed help button
-
- * share/help.xpm: changed help
-
-2001/03/27 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm, pkgs.pm: fixed too early erasing of old rpmlib db. now
- postponed at end of install
- and only if rpm-4.0 or above has been installed.
-
- * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
- * Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm, Xconfig.pm: added
- support for two mice (laptop). The second mice is generally PS/2 as
- probe can says it is present.
-
-2001/03/27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27 Pixel <pixel@mandrakesoft.com>
-
- * any.pm, install2.pm: remove use of Bastille. get back to the good state
- we had :)
-
- * install_any.pm: warnAboutNaughtyServers
- (setPackages): default profiles selection to GNOME, KDE, CONFIG
-
- * share/rpmsrate: move back Bastille-Curses-module to CONFIG
- - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
- LOCALES"zh"
- - raise WindowMaker
- - add xfce
- - am-utils is a server
- - raise some stuff in CONFIG to have stuff there
- - remove drakxtools from CONFIG (DrakConf requires drakxtools)
- - DrakConf from 5 to 4
-
- * install_steps_interactive.pm: warnAboutNaughtyServers
- (summary): fix displaying of printer configured
-
- * lang.pm (langsLANGUAGE): give the list of languages
-
- * pkgs.pm: warnAboutNaughtyServers
-
- * install_steps_gtk.pm (installPackages): catch the no png file exception
- (in case warly is dumb again)
-
-2001/03/27 siegel
-
- * share/po/i18n_compssUsers: i18n group names
-
- * share/po/de.po: minor typo-fixes
- new german version
-
-2001/03/26 daouda
-
- * share/rpmsrate: add mandrake_desk and rootfiles to SYSTEM (rpmsrate)
-
-2001/03/26 fcrozat
-
- * share/rpmsrate: Install xscreensaver when installing GNOME
-
-2001/03/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: first attempt at pixelization of code (till's cups
- patches)
-
-2001/03/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/hr.po, share/po/wa.po: Updated Croatian, vietnamese and Walloon
- files
-
- * share/po/vi.po: Updated Croatian, vietnamese and Walloon files
- Updated Portuguese, Swedish and Thai files
-
- * share/po/pt.po, share/po/th.po, share/po/es.po, share/po/de.po,
- share/po/sv.po: Updated Portuguese, Swedish and Thai files
-
-2001/03/25 Pixel <pixel@mandrakesoft.com>
-
- * http.pm (getFile): verify the return value of the server. If not 200
- (aka Ok),
- return undef
-
- * install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
- and libqtcups2 for kups in
- pkg_install_if_requires_satisfied
-
-2001/03/25 siegel
-
- * share/po/de.po: new german version
-
-2001/03/25 fabman
-
- * share/po/es.po: updated spanish .po file
-
-2001/03/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po: Updated Korean file
-
- * share/po/sv.po: Updated Swedish file
-
-2001/03/25 Pixel <pixel@mandrakesoft.com>
-
- * http.pm (getFile): verify the return value of the server. If not 200
- (aka Ok),
- return undef
-
- * install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
- and libqtcups2 for kups in
- pkg_install_if_requires_satisfied
-
- * any.pm (ask_users): fix dead-loop
-
- * bootloader.pm (suggest): add entry for nt
-
-2001/03/25 siegel
-
- * share/po/de.po: new german version
-
-2001/03/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/vi.po: Updated Vietnamese file
-
-2001/03/24 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: remove the "use common" which
- is unneeded (and "member" of merge2pcitable
- was clashing)
-
- * any.pm (ask_users): when "Done" is pressed, do "Accept User" if a user
- is given.
-
- * install_steps.pm (addUser): disable_user_view (in kdm/gdm) if no users
-
- * install_any.pm (disable_user_view): created, takes care of gdm too
- (taken from msec)
-
- * mouse.pm (detect): fix francois... uh, no too hard. easier to fix
- francois's bugs ;pp
-
- * timezone.pm (%l2t): fix for fuzzyChoice
-
- * share/keyboards.tar.bz2:
- - readding with -kb
- - fixing permissions on xmodmap.kr
- remove before adding again with -kb
-
- * modules.pm: have natsemi in network.img
-
-2001/03/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (detect): fix francois... uh, no too hard. easier to fix
- francois's bugs ;pp
-
- * timezone.pm (%l2t): fix for fuzzyChoice
-
- * modules.pm:
- - add missing modules (now in sync with pcitable)
- - add 'media' class
- - cleanup
-
-2001/03/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (copy_advertising): fix escaping $f causing perl to
- segfault :-(
- (copy_advertising): handle i18n'ed advertising
-
- * pkgs.pm: cleanup
-
- * modules.pm:
- - add missing modules (now in sync with pcitable)
- - add 'media' class
- - cleanup
-
-2001/03/24 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: corrected bad exited. reincorporated some ugly code,
- need fixing
-
-2001/03/24 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (copy_advertising): handle i18n'ed advertising
-
- * modules.pm (read_stage1_conf): cleanup parport stuff obsolote in kernel
- 2.4
-
-2001/03/23 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed screen id for Device to be present whenever the
- same BusID is used.
- added multiple tablet support (wacom), moved usb probe for mouse and
- tablet
- at the beginning.
-
- * printerdrake.pm: Do not ask to configure a printer if standalone,
- previously only for embended.
-
- * Xconfig.pm: fixed typo for wacom.
- added multiple tablet support (wacom), moved usb probe for mouse and
- tablet
- at the beginning.
-
- * mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
- multiple tablet support (wacom), moved usb probe for mouse and tablet
- at the beginning.
-
-2001/03/23 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_listf_no_check): fix the fix fix fix
- (ask_from_listf_no_check): fix the fix fix
-
- * common.pm (formatError): created
-
- * network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
- DHCP/BOOTP
-
- * diskdrake.pm (try): format the error (no more "at line ...")
- (Add2LVM): "new" was not i18n'ed
-
- * install_steps_interactive.pm (exitInstall): no "cancel" button
-
- * partition_table.pm: add Empty to bad_types
-
- * fsedit.pm (change_type): When changing a partition type from ext2fs to
- Linux RAID
- (or LVM), the mount point should be removed.
-
-2001/03/23 siegel
-
- * share/po/de.po: new german version
-
-2001/03/23 dam's <damien@mandrakesoft.com>
-
- * tinyfirewall.pm: corrected bad translation
- correctedd typo
- updated
- code cleaning
- tinyfirewall now works.
-
- * Makefile.config: added tinyfirewall
-
- * any.pm, mouse.pm: added /dev/modem in modem list selection
-
- * standalone/drakxconf: added tinyfirewall entry
-
- * standalone/tinyfirewall: added update code
- updated wrapper to launch tinyfirewall in embedded mode
-
- * netconnect.pm: added /dev/modem in modem list selection
- netconnect doesn't write the file 1
-
-2001/03/23 fcrozat
-
- * share/rpmsrate: nautilus-mozilla and xalf are installed by default in
- GNOME
- gmc is not installed by default in GNOME
- gabber gaim are moved to instant messaging
- gcombust in moved to GNOME CD burner
- gtm is installed by GNOME/File transfer
- mozilla is installed by default as www browser
- galeon is installed by default as www browser for GNOME
-
-2001/03/23 François Pons <fpons@mandrakesoft.com>
-
- * tools/syncrpms: added size-stamp test to copy identical file in version,
- release.
-
- * Xconfig.pm: fixed typo for wacom.
- added multiple tablet support (wacom), moved usb probe for mouse and
- tablet
- at the beginning.
-
- * Xconfigurator.pm: added multiple tablet support (wacom), moved usb probe
- for mouse and tablet
- at the beginning.
- fixed wrong usage of Screen keyword in Device section, should be present
- and
- reseted for any multi head card with only one BusID.
-
- * mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
- multiple tablet support (wacom), moved usb probe for mouse and tablet
- at the beginning.
-
-2001/03/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/es.po, share/po/de.po, share/po/fi.po: Added Vietnamese file
- Updated Finnish file
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
- share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: Added Vietnamese file
-
-2001/03/23 Pixel <pixel@mandrakesoft.com>
-
- * any.pm: ifix the dams stuff
-
- * install_steps_interactive.pm (exitInstall): no "cancel" button
-
- * share/po/i18n_compssUsers: fix for better compliance with po format
-
- * netconnect.pm: ifix the dams stuff
- cleanup and enable gzip'ed isdn.db
-
- * Makefile: gzip ldetect-lst files
-
- * modules.pm: add i810_audio (still need a script to add missing one and
- keep in sync)
-
- * bootloader.pm (suggest_floppy): don't add an entry for non-fd0 drives
-
- * interactive.pm (ask_from_listf_no_check): fix the fix fix fix
- (ask_from_listf_no_check): fix the fix fix
- (ask_from_listf_no_check): fix the bad fix
-
- * common.pm (formatError): created
- (openFileMaybeCompressed, catMaybeCompressed): added
- (getVarsFromSh): take care of comments
-
- * network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
- DHCP/BOOTP
-
- * partition_table.pm: add Empty to bad_types
-
- * mouse.pm (detect): never probe psaux (workaround for kernel/xfree bug)
-
- * fsedit.pm (change_type): When changing a partition type from ext2fs to
- Linux RAID
- (or LVM), the mount point should be removed.
-
- * detect_devices.pm (isUSBFDUDrive, usbfdus): removed, doesn't scale
- (isFloppyOrHD): floppy type is 'fd', not 'floppy'
- (stringlist): nicer (a la new lspcidrake)
-
- * Xconfigurator.pm: enable use of gzip'ed Cards+, CardsNames and
- MonitorsDB
-
- * diskdrake.pm (try): format the error (no more "at line ...")
- (Add2LVM): "new" was not i18n'ed
-
-2001/03/23 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mouse.pm, bootloader.pm: mods to create/move image, to /export for PPC,
- use vmlinux for PPC
- prepend of_dev to initrd stanza in yaboot.conf
- add 1-button mouse for PPC
-
-2001/03/23 siegel
-
- * share/po/de.po: new german version
-
-2001/03/22 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * tools/i386/netboot/stage1.rtl8139, tools/i386/netboot/stage2.rtl8139:
- Add 8139 grub stage.
-
-2001/03/22 dam's <damien@mandrakesoft.com>
-
- * bootlook.pm: corrected mapn
-
- * standalone/draknet: removed use Data::Dumper
-
- * netconnect.pm: removed mail informat oin
- comment update
-
- * tinyfirewall.pm: removed use Data::Dumper
- working on tinyfirewall
-
-2001/03/22 fabman
-
- * share/po/es.po: changed "swap" for "intercambio" in the spanish .po
- files
- updated DrakX, menudrake and urpmi es.po files
-
-2001/03/22 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed wrong access to undefined value promoted to
- empty array reference.
-
-2001/03/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/probing.c, mdk-stage1/tools.h:
- - fix detection of more than 3 scsi attached devices
- - cleaner code for cmp of ptr against static strings
-
-2001/03/22 Pixel <pixel@mandrakesoft.com>
-
- * standalone/mousedrake: remove test ugliness of dams
-
- * c/Makefile.PL: no pcmcia_probe in drakxtools
-
- * modules.pm (load_thiskind): indent as it should be
-
- * install_steps_interactive.pm (generateAutoInstFloppy): fix the message
- which was uptodate only for
- sparc :-(
-
- * Xconfigurator.pm: no need for "use Data::Dumper;"
-
-2001/03/22 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * modules.pm: no imm,ppa PPC, scan mesh,mac53c94 scsi only, pmac should
- have been mace
-
-2001/03/22 yduret
-
- * bootlook.pm: mapn works tx dams
- nmap
- added mapn fun to reduce code.. testing it
- added install of rpm
- xpm png files
-
- * pixmaps/hori.png, pixmaps/gmon.png, pixmaps/tradi.png, pixmaps/hori.xpm,
- pixmaps/verti.png, pixmaps/gmon.xpm, pixmaps/tradi.xpm,
- pixmaps/verti.xpm: convert xpm to png
-
-2001/03/21 dam's <damien@mandrakesoft.com>
-
- * standalone/tinyfirewall, tinyfirewall.pm: new tinyfirewall conf tool
-
- * netconnect.pm: corrected /etc/sysconfig/network-scripts/net_up.* bug
-
-2001/03/21 François Pons <fpons@mandrakesoft.com>
-
- * detect_devices.pm: added pci id reference.
-
- * c/stuff.xs.pm: added support for pci id extraction.
-
- * Xconfigurator.pm: fixed wrong XFree4 version reference.
- fixed null string in monitor identifier.
- added multi-head support in XFdrake.
-
-2001/03/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: honour embedded mode
-
- * share/compssUsers: move NETWORKING_FILE (contains stuff for nfs
- mounting..) from Internet
- Station to Network Computer
-
-2001/03/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po,
- share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po,
- share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
- share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated
- Croatian and Serbian files
-
- * share/po/sp.po, share/po/sr.po: Updated Serbian files
- Updated Croatian and Serbian files
-
- * share/po/az.po: Updated Azeri file
- Updated Croatian and Serbian files
-
- * share/po/sk.po: Updated Azeri and Slovak files
- Updated Croatian and Serbian files
-
- * lang.pm: Added fields to charsets table holding info for mount
- (iocharset and
- codepage mount options)
-
-2001/03/21 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (g_default_packages): nice warning if mount in vfat fails
-
- * share/rpmsrate: move webmin to CONFIG
- remove ipchains and iptables, raise gfcc
-
- * docs/README: add cvs howto
-
- * install_steps_interactive.pm (summary): fix
-
- * detect_devices.pm: old code
-
- * bootloader.pm (install_lilo): ensure labels don't contain spaces, lilo
- doesn't like them
- (add_kernel): cleanup
- (suggest): make it work with kernel22-secure and no kernel22
-
- * modules.pm (when_load): move the alias sound to when_load, don't check
- ppc as it
- could be used for non-ppc
- (load_thiskind): fix pb causing imm,ppa,usb-storage to be tested for
- every
- load_thiskind, not only scsi one
-
- * c/stuff.xs.pm (from_utf8): as pablo said...
-
-2001/03/21 siegel
-
- * share/po/de.po: new german version
- new german version
-
-2001/03/20 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (@drivers_by_category): if_ization
- (load_thiskind): cleanup
-
-2001/03/21 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (add_kernel): cleanup
- (suggest): make it work with kernel22-secure and no kernel22
-
- * share/rpmsrate: remove ipchains and iptables, raise gfcc
-
-2001/03/20 dam's <damien@mandrakesoft.com>
-
- * interactive.pm: no wizard if warning
-
-2001/03/20 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: fix pcmcia functions only on x86
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
-
- * modules.pm (@drivers_by_category): if_ization
- (load_thiskind): cleanup
-
- * any.pm, install2.pm, share/rpmsrate: use bastille backend
-
- * c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-
- * install_steps.pm, install_any.pm:
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
-
-2001/03/20 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * modules.pm, install_steps_interactive.pm, any.pm: make_boot_img: add
- routine for - PPC
- any.pm: double "Append" entry in expert mode for yaboot.conf - PPC
- install_steps_interactive: setup dmasound - PPC
- modules.pm: load Mac hardware modules - PPC
-
-2001/03/20 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bug in reading resolv.conf, and changed chmod
- for net_cnx_*
-
- * interactive.pm: no wizard if warning
-
- * standalone/draknet: added update after {dis}connecting
-
-2001/03/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * diskdrake.pm: fix formatting of raid
-
-2001/03/20 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: use bastille backend
- - add nautilus
-
- * install_steps_interactive.pm: fix pcmcia functions only on x86
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
- (setupSCSI): don't pcmcia_probe if testing
- - tellAboutProprietaryModules moved to setupSCSI
- - miscellaneous step re-enabled, called Security
- - pcmcia_probe moved to setupSCSI, skipped in noauto
-
- * any.pm: use bastille backend
-
- * install2.pm: use bastille backend
- - tellAboutProprietaryModules moved to setupSCSI
- - miscellaneous step re-enabled, called Security
- - pcmcia_probe moved to setupSCSI, skipped in noauto
- have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
- parameter any more)
-
- * netconnect.pm (modem_detect_backend): cleanup
-
- * c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
- have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
- parameter any more)
-
- * Makefile: install cardmgr
-
- * install_any.pm:
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
- (setPackages): install usbd in case of usb
-
- * install_steps.pm:
- - create install_any::unselectMostPackages
- - use it instead of pkgs::unselectAllPackages (otherwise
- default_packages ends up non-selected)
-
-2001/03/20 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * any.pm, netconnect.pm, detect_devices.pm: any.pm: enable module load PPC
- detect_devices.pm: forgot to remove commented code after test
- netconnect.pm: load macserial module for PPC
-
-2001/03/20 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet, netconnect.pm: improved connection windows, and
- loading / saving of /etc/sysconfig/network-scripot/netčcnx*
-
-2001/03/20 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate:
- - add nautilus
-
- * install_any.pm (setPackages): install usbd in case of usb
-
- * Makefile: install cardmgr
-
-2001/03/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * fsedit.pm: fix loopback appearing twice in format partition
-
- * diskdrake.pm: fix "loopback" name of loopback tab in diskdrake
-
-2001/03/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po: updated korean file
- Updated po files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (computeGroupSize): fix hacks, better hacks
- (saveCompssUsers): fix
-
- * install_steps_interactive.pm (chooseGroups):
- - make the computed size work
- - unselectAll when a profile is unselected
-
- * interactive_gtk.pm (ask_from_entries_refW): better sizing in case of
- scrolls
-
-2001/03/19 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/19 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corrected graphical layout for newbies
-
- * netconnect.pm: added net_cnx_{up, down} save
-
-2001/03/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ko.po: updated korean file
- Updated po files
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (computeGroupSize): fix hacks, better hacks
- (saveCompssUsers): fix
-
- * share/rpmsrate:
- - add rxvt-CJK
- - exchange xterm and rxvt
- - move bc from SCIENCES to SYSTEM
-
- * interactive_newt.pm (ask_from_entries_refW):
- - ensure the width is less than $width - 7 (in french and 80x25, the
- treelist was too big)
- - if term is very big, use 10 lines instead of 5
- - if no button is asked, but one in any case otherwise it's buggy
-
- * install_steps_interactive.pm (chooseGroups):
- - make the computed size work
- - unselectAll when a profile is unselected
-
- * interactive.pm (ask_from_listf_no_check): fix fix
- (ask_from_listf_no_check): fix the filtering of exceptions
-
-2001/03/19 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/18 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/lomount.h, mdk-stage1/lomount.c, mdk-stage1/disk.c: fix for
- hd-install when you provide a not valid ISO (cd #2 for example)
-
- * mdk-stage1/frontend.h, mdk-stage1/minilibc.h, mdk-stage1/stage1.h,
- mdk-stage1/log.h: use some help with __attribute__
-
-2001/03/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/tree/etc/rc.sysinit: load sr_mod and sd_mod at startup
-
- * mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/.cvsignore: sync
-
- * mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
- editing ask_from_entries in stdio mode
-
- * mdk-stage1/pci-resource/Makefile: do not use marfiles for deps
-
-2001/03/17 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
- * install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
- * share/rpmsrate: add gpm & evolution
-
-2001/03/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/insmod-busybox/utility.c: fix insmod calling realloc(0,0) to
- work with dietlibc
-
- * mdk-stage1/insmod-busybox/Makefile: also build standalone insmod-DIET
- for testing purposes..
-
- * mdk-stage1/mkinitrd_helper/Makefile: bump version to 1.0.1 for new
- mkinitrd package release
-
- * mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
- editing ask_from_entries in stdio mode
-
-2001/03/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sv.po: updated Swedish file
-
- * share/keyboards.tar.bz2: Added a Korean keyboard, fixed bug in Japanese
- keyboard
-
- * keyboard.pm: Added choice of Korean keyboard
-
-2001/03/17 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
- * install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
- * share/rpmsrate: add gpm & evolution
-
-2001/03/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/Makefile: refine deps
-
- * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/Makefile,
- mdk-stage1/mkinitrd_helper/Makefile: write down mkinitrd_helper
-
- * mdk-stage1/insmod-busybox/insmod.c: force load
-
-2001/03/16 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (setPackages): set flag "TV" when bttv hardware is there
-
- * share/compssUsers, share/rpmsrate: move out TV from VIDEO
-
- * diskdrake.pm (Type): fix the code verifying size >32 for reiserfs
-
- * modules.pm (write_conf): better logging
-
- * c/stuff.xs.pm: add from_utf8
-
- * c/stuff.pm (headerGetEntry): use from_utf8 on group, summary and
- description
-
-2001/03/16 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * tools/ppc/magic, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/convert,
- tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic,
- mapping, mkhybrid-1.12b5.4, yaboot - re-add - my bad
- gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot -
- remove/re-add - did not use -kb switch - thx Pixel
-
-2001/03/15 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: SiS card are no more prefered for XF3.
- added standalone support to prefer XF3 or XF4 to
- keep current used server version.
-
- * standalone/XFdrake: remove duplicate begin label.
- take care of existing configuration.
-
-2001/03/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: skip dc395x_trm on stage1
- dc395x_trm is back in 2.4
-
- * share/compssUsers: try to enhance
-
-2001/03/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: updated Azeri file
-
-2001/03/15 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator_consts.pm, Xconfigurator.pm: andre@node1583e.a2000.nl says
- this is not needed anymore :)
-
-2001/03/15 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * tools/ppc/magic, tools/ppc/convert, tools/ppc/iboot,
- tools/ppc/mkINSTALLCD, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/yaboot,
- tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkINSTALLCD,
- mkhybrid-1.12b5.4, yaboot: create PPC CD
-
- * install_steps_interactive.pm, detect_devices.pm, bootloader.pm:
- bootloader.pm, detect_devices.pm, install_steps_interactive.pm: changed
- temporary file read/write per Pixel
-
- * Xconfigurator.pm: force 1024x768 on Powerbook
-
- * tools/ppc/README: README: README for creating PPC boot CD
-
-2001/03/14 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: changed label + profile before types..
-
-2001/03/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po,
- share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/Changelog, share/po/sk.po,
- share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
- share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
- share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po:
- corrected the script and updated po files
-
-2001/03/14 Pixel <pixel@mandrakesoft.com>
-
- * share/compssUsers: keep only one Development entry
-
- * install_steps_gtk.pm, pkgs.pm: fix the compssUsers interpretation
-
- * bootlook.pm: fix for perl2fcalls
-
- * install_steps_interactive.pm (chooseGroups): disable the size display as
- it is wrong (for the beta2)
-
-2001/03/14 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_gtk.pm,
- partition_table_mac.pm, bootloader.pm: fix bootstrap partition
- creation/tracking
- allow Xpmac to launch in 2 modes based on cmdline
-
-2001/03/14 siegel
-
- * share/po/de.po: new german version
-
-2001/03/14 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: changed label + profile before types..
-
-2001/03/14 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed unselect management of choice, propagate unselection
- correctly to all
- packages requiring unselected package.
-
- * install_any.pm: use LD_LOADER when invoking parshedlist.
-
-2001/03/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po, share/po/nl.po: updated Norwegian file
-
- * share/locales.tar.bz2, share/gconv.tar.bz2, share/list,
- share/fonts.tar.bz2: new fonts and locale files
-
- * share/po/ko.po: Fixed email of Korean translator
- updated Korean file
-
- * install_steps_interactive.pm, install_gtk.pm, lang.pm, keyboard.pm:
- completed language list
- completed language->keyboard guessing list
- aesthetic changes to an English message (removed \n and let gtk+
- do the formatting, it is nicer)
-
- * share/po/az.po: Updated Azeri file
-
-2001/03/14 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: fix the compssUsers interpretation
- (readCompssUsers): change the key of compssUsers, added "label"
- (computeGroupSize): fix bug
- (computeGroupSize): fix logging
-
- * share/gconv.tar.bz2: moved to share/list
-
- * bootlook.pm: fix for perl2fcalls
-
- * share/rpmsrate: CLIENT & SERVER is prohibited
-
- * timezone.pm:
- - add many timezones
- - defaults to GMT
- - verifier added
-
- * install_steps_gtk.pm: fix the compssUsers interpretation
- (choosePackagesTree): fix
-
- * common.pm (bestMatchSentence, bestMatchSentence2): in wantarray, return
- the number
- of matched words/characters
-
- * share/compssUsers: keep only one Development entry
- CLIENT & SERVER is prohibited
-
- * install_steps_interactive.pm (chooseGroups): disable the size display as
- it is wrong (for the beta2)
- (chooseGroups): add path for seperating groups, use "label" for the
- group text
-
- * Makefile: remove gconv
-
-2001/03/13 siegel
-
- * share/po/de.po: Fixed typos.
-
-2001/03/13 siegel
-
- * share/po/de.po: Fixed typos.
-
-2001/03/13 dam's <damien@mandrakesoft.com>
-
- * share/help.png: changed
-
-2001/03/13 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm, install_steps_gtk.pm: compss is deprecated. use compssUsers
- for the tree
-
- * standalone/drakgw: pixelization
-
- * share/rpmsrate: HDF can't be at the beginning of the line or it will be
- taken as a flag
- moved icewm to SYSTEM with !KDE !GNOME
-
- * pkgs.pm: compss is deprecated. use compssUsers for the tree
- (readCompssUsers): get the "path"
-
- * install_steps.pm: compss is deprecated. use compssUsers for the tree
- renamef created and used
-
- * detect_devices.pm (burners): don't use cdroms() which return scdX for
- ide burners, and
- isBurner don't use the same technique. so use get() and grep for type
- "cdrom"
-
- * install_any.pm: compss is deprecated. use compssUsers for the tree
- (setPackages): set {compssUsersChoice}{PCMCIA} if hasPCMCIA
- renamef created and used
-
- * install_steps_interactive.pm: compss is deprecated. use compssUsers for
- the tree
- (chooseGroups): fix to get back the icons
- (chooseGroups): size computed should work
-
- * common.pm: renamef created and used
-
-2001/03/13 siegel
-
- * share/po/de.po: new german translation
-
-2001/03/13 warly
-
- * share/compssUsers: fix {W,w}orkstation
- remove ^Server and ^Development
-
-2001/03/13 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakgw: pixelization
-
- * install_steps_interactive.pm (chooseGroups): size computed should work
-
- * share/rpmsrate: moved icewm to SYSTEM with !KDE !GNOME
-
- * install_steps.pm, common.pm, install_any.pm: renamef created and used
-
-2001/03/12 dam's <damien@mandrakesoft.com>
-
- * Makefile: removed wizard pixmap from install
-
- * pixmaps/wiz_internet.png, pixmaps/wiz_internet_left.png: updated
- added pixmap for wizard
-
- * my_gtk.pm: new wizard layout, with pixmaps.
- added ugly workaround for ugly Hseparator
-
- * share/step-red.png, share/step-orange.png, share/step-orange-click.png,
- share/step-green-click.png, share/step-green.png, share/step-red-on.png,
- share/step-orange-on.png, share/step-green-on.png,
- share/step-green_s.png, share/step-red-click.png: removing bad png
- files...
-
- * share/help.png: new help button. blah
-
- * install_any.pm: typo
-
- * pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png: updated
-
- * netconnect.pm: corrected askokcancel -> askyesorno
-
- * interactive.pm: corrected bad okcanel in wizard mode
-
- * install_steps_interactive.pm: added $::isInstall
-
- * share/logo-mandrake_trans.png: new logo for other themes
-
- * services.pm: removed use Data::Dumper
- corrected bug in display
-
-2001/03/12 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm, lang.pm, commands.pm, detect_devices.pm, pkgs.pm,
- live_install2: fixed live update between GLIBC 2.1 and GLIBC 2.2. should
- work for other
- combination but not tested. fixed locale usage and gtk environment
- interaction (added LOCPATH, GCONV_PATH and GTK_EXE_PREFIX).
- created LD_LOADER environment variable to keep track of right ELF loader
- to be used for the GLIBC used by the live update. added internal PATH
- to LD_LIBRARY_PATH as ELF loader only check this one and not PATH.
-
-2001/03/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw:
- - make it work as a wizard
- - make it work with iptables (kernel-2.4)
-
- * modules.pm: reflect Jeff Garzik's answers to my questions on kernel@
-
-2001/03/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/bg.po, share/po/de.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/br.po, share/po/ca.po,
- share/po/cy.po, share/po/uk.po, share/po/wa.po, share/po/da.po,
- share/po/cs.po, share/po/zh_TW.Big5.po, share/po/af.po: Updated Basque
- file
-
-2001/03/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): save the compssUsers flattened
- for rpmdrake
-
- * install_steps_interactive.pm (summary): remove 'clicked' (labels are
- used)
- put everything in %compssUsers, use field flags for the flags :)
-
- * pkgs.pm (computeGroupSize): log what is found
- (saveCompssUsers): make it work
- (readCompssUsers): clean-up
- (saveCompssUsers): created
- put everything in %compssUsers, use field flags for the flags :)
- (computeGroupSize): created
-
- * share/rpmsrate: lower Zope (anyway Zope is not in main)
-
- * fsedit.pm (hds): search for existing lvm in @hds *and* @lvms
-
- * commands.pm (loadkeys): created
-
- * install_any.pm (setPackages): don't readCompssUsers with $o->{packages}
- (setPackages): kernel-secure doesn't exist anymore, use kernel22-secure.
- don't use kernel-secure as a kernel-smp.
- put everything in %compssUsers, use field flags for the flags :)
- (setPackages): set compssUsersChoice "3D" if 3D enabled graphic card
-
- * interactive_gtk.pm (ask_from_entries_refW): add $set for "label" entries
- add "label" type
-
- * share/compssUsers: change the path format
-
- * detect_devices.pm (get_mac_model): fix for perl2fcalls
-
- * interactive.pm: add "label" type
-
-2001/03/12 warly
-
- * share/compssUsers: add some NETWORKING_* that were empty
- dispach some DEVELOPMENT and SERVER to more appropriate groups
- added path
-
- * share/rpmsrate: add some NETWORKING_* that were empty
- dispach some DEVELOPMENT and SERVER to more appropriate groups
-
-2001/03/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * ftp.pm: do not retry on 550 file unavailable
-
-2001/03/12 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (setPackages): set compssUsersChoice "3D" if 3D enabled
- graphic card
-
-2001/03/11 dam's <damien@mandrakesoft.com>
-
- * services.pm: no more restart button
-
-2001/03/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * ftp.pm: do not retry on 550 file unavailable
-
-2001/03/11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (summary): fix clicked empty handler
-
- * share/rpmsrate:
- - lower tftp-server
- - a lot of modifs (thanks to Prana)
-
-2001/03/10 dam's <damien@mandrakesoft.com>
-
- * standalone/drakxservices: embedded mode
-
- * my_gtk.pm: added gtkset_border_width
- typo again
- typo
- added gtkmove
- added gtkset_modal and gtkappenditems
-
- * services.pm: fixed big bug.
- imajor improvement.
- improved.
-
-2001/03/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated Korean file
-
-2001/03/09 dam's <damien@mandrakesoft.com>
-
- * standalone/drakxconf: added harddrake
-
- * my_gtk.pm: applied gtkradio
- created create_boxradio
- in wizard mode : list -> radio buttons
- added gtkradio
-
- * bootlook.pm: workaround for the graphical layout.
-
- * install_steps_gtk.pm: applied gtkradio
- created create_boxradio
- in wizard mode : list -> radio buttons
-
- * printerdrake.pm: if embedded -> no first question
-
- * interactive_gtk.pm: added tooltips to create_boxradio
- applied gtkradio
- created create_boxradio
- in wizard mode : list -> radio buttons
-
-2001/03/09 Pixel <pixel@mandrakesoft.com>
-
- * share/rpmsrate: a hell lot of modifications, mostly cleanup of
- DEVELOPEMENT
-
-2001/03/09 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: keyboard mapping for PPC
-
- * detect_devices.pm: routine to detect MacIntosh model code
-
-2001/03/09 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm: added gtkradio
-
- * standalone/draknet: changed graphical layout, expert mode
-
-2001/03/09 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (read_rpmsrate): handle the special case of packages requiring
- locales-*,
- adding the flag LOCALES"*" for them
-
- * install_steps_interactive.pm (choosePackages): moved the log to
- install2::choosePackages (to have it in
- auto_installs too)
-
- * install_any.pm (setPackages): set compssUsersChoice LOCALES"*"
-
- * install2.pm (choosePackages): log groups choosen
-
- * share/rpmsrate: a hell lot of modifications, mostly cleanup of
- DEVELOPEMENT
- - chineese packages
- - move Aurora's to AURORA (DrakX take care of Aurora)
-
- * install_steps_gtk.pm (remove_advertising): created
-
-2001/03/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * verify_c: fix the regexp
-
- * detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: applied if__
-
-2001/03/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * verify_c: fix the regexp
-
- * share/rpmsrate: add i18n'ed packages
-
- * detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08 dam's <damien@mandrakesoft.com>
-
- * common.pm: added if__
-
- * netconnect.pm: applied if__
-
-2001/03/08 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm: avoid using e2fsck, else it abort by checking partition
- size (which differs).
- fix resize ext2 by using resize2fs.
-
- * pkgs.pm: changed choice of package for selection.
-
- * share/list: added resize2fs and dumpe2fs, removed ext2resize which is
- replaced.
-
-2001/03/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dhcp.c: do not segfault in dhcp stuff, when af_packet is not
- honoured by kernel
-
-2001/03/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: advertising modifs
- (setPackages): use burners instead of IDEburners
-
- * bootloader.pm: cleanup
-
- * interactive.pm (ask_from_listf_no_check): catch wizcancel and return
- undef
-
- * fs.pm (write_fstab): change again for 'none' checking the mount point
- (write_fstab): special case for device ``none'' (which can be mounted
- twice or more :)
-
- * my_gtk.pm (_create_window): on delete_event, destroy the window and
- raise wizcancel
-
- * share/po/fr.po: fix bad translation
-
- * share/rpmsrate: add i18n'ed packages
- raise kdebase
-
- * install2.pm, install_steps.pm, install_steps_gtk.pm: advertising modifs
-
- * detect_devices.pm: cleanup
- (isBurner): use syslog to detect scsi burners
-
-2001/03/08 Stew Benedict <sbenedict@mandrakesoft.com>
-
- * install_steps_gtk.pm: encourage Xpmac to run in at least 16bpp
-
- * partition_table_mac.pm: fixed variable referencing - thx Pixel
-
-2001/03/08 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad pci number -> string
-
-2001/03/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po, share/po/sr.po, share/po/sp.po, share/po/ca.po: updated
- Bulgarian, Catalan and Serbian files
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (dev2grub): better error reporting
-
- * tools/cvslog2changelog.pl (%users): add stew
-
- * install_steps.pm (setupBootloaderBefore): aurora stupid renaming fix
-
- * share/rpmsrate: raise kdebase
- xcdroast is the best cd burner ui, raise it above others
- lower some EDITORS
- raise vim-X11
- lower xrn, raise pan
-
- * install_any.pm (setPackages): use burners instead of IDEburners
- (setPackages): at least set BURNER for ide burners
-
- * any.pm: cleanup
-
- * install_steps_interactive.pm, install2.pm: re-add miscellaneous step,
- but always hidden (aka automatic)
-
- * detect_devices.pm (isBurner): use syslog to detect scsi burners
-
- * fs.pm (write_fstab): special case for device ``none'' (which can be
- mounted
- twice or more :)
-
- * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
- (without mem=)
-
-2001/03/08 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad pci number -> string
-
-2001/03/08 Pixel <pixel@mandrakesoft.com>
-
- * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
- (without mem=)
-
-2001/03/07 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected default focus after detection
- don't test adsl if net install
-
-2001/03/07 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (add_alias): remove the alias block-major-11 as it's
- overriding the
- default alias to sr_mod, and is uneeded with scsi_hostadapter being
- added
- to /etc/modules.conf
-
- * share/rpmsrate: lower heartbeat
-
-2001/03/07 sbenedict
-
- * help.pm: * perl-install/help.pm - typo in yaboot help
-
- * any.pm: * perl-install/any.pm - fixed two $l vs. @l references -
- bootloader menu, need image/boot in rec mode PPC
- CVl:
- ----------------------------------------------------------------------
-
- * devices.pm: * perl-install/devices.pm - add adbmouse
-
-2001/03/07 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: not use common anymore, uses gtkpng, cosmetic chages
-
-2001/03/07 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm, bootloader.pm: fixed support for other kernel for
- bootloader entries.
- automatically add 2.2 entries for kernel22 (manage hack-kernel too).
-
- * Xconfigurator.pm: remove 32 bit depth for S3 Trio3D card.
-
- * pkgs.pm: added support for killing all child process of a transaction,
- necessary to be
- able to umount cdrom and eject it correctly.
-
-2001/03/07 Pixel <pixel@mandrakesoft.com>
-
- * share/fonts.tar.bz2: use gb16fs instead of gb16st
-
- * modules.pm (add_alias): remove the alias block-major-11 as it's
- overriding the
- default alias to sr_mod, and is uneeded with scsi_hostadapter being
- added
- to /etc/modules.conf
-
- * share/rpmsrate: lower heartbeat
- lower Mesa's rate
-
- * install2.pm (main): save $@ in $err so that it's not modified before
- being used
-
- * share/locales.tar.bz2: remove ending '/' in symlinks not pleasing
- packdrake
-
- * standalone/drakboot: make it please perl2fcalls
-
-2001/03/07 sbenedict
-
- * bootloader.pm, Xconfigurator.pm: * perl-install/Xconfigurator.pm - force
- XF4 for PPC in recommended mode
- * perl-install/bootloader.pm - rework get_of_dev to work in live install
-
- * install_steps_interactive.pm, any.pm, partition_table_mac.pm: *
- perl-install/any.pm - change in partition_table_mac'xxx syntax
- * perl-install/install_steps_interactive.pm - change in
- partition_table_mac'xxx syntax
-
- * perl-install/partition_table_mac.pm - change in
- partition_table_mac'xxx syntax
-
-2001/03/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/fr.po: Fixed French typos reported by tester
-
-2001/03/07 Pixel <pixel@mandrakesoft.com>
-
- * share/fonts.tar.bz2: use gb16fs instead of gb16st
-
- * fsedit.pm: fix typo
-
- * install2.pm (main): save $@ in $err so that it's not modified before
- being used
-
- * share/rpmsrate: lower Mesa's rate
-
- * standalone/drakboot: make it please perl2fcalls
-
-2001/03/06 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected bad %intf while savung
- don't ask configuration if expert
- now detecting adsl
-
- * standalone/draknet: remmoved 'quiting appli' screen
-
-2001/03/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: fix save of automatic stage1 info for static network
-
- * mdk-stage1/init.c: do not display from syslog msg's from RPM telling
- that it
- installed/removed some pkg's
-
- * mdk-stage1/Makefile: fix includes for init
-
-2001/03/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, standalone/draknet,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
- share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese
- file
-
-2001/03/06 Pixel <pixel@mandrakesoft.com>
-
- * perl2fcalls:
- - small fix for bootlook.pm
- - don't display reused
-
- * detect_devices.pm (stringlist): if no text description, display ids
-
- * install_steps_interactive.pm (generateAutoInstFloppy): comment old code
- (summary): fixes
- (setupSCSI): cleanup
- (summary): display sound/tv/isdn cards found
-
- * fsedit.pm (check_mntpoint): don't allow LVM on / or /boot
- (@suggestions_mntpoints): add /boot
-
- * install_any.pm: hack to make perl2fcalls happy
- (getHds): fix for no hd detected in newbie installs
- (setPackages): s/snd-slot/sound-slot/
-
- * install_steps_auto_install.pm (@graphical_steps): add
- beforeInstallPackages so that advertisings are there
-
- * install2.pm (setupSCSI): remove autoSCSI, cleanup
-
- * http.pm, ftp.pm: don't use install_any
-
- * modules.pm: add cciss
-
- * partition_table.pm (add): create 3 primaries before creating an extended
- if DAC960 (/dev/rd/*)
- (add): max number of parts for rd, ida and cciss
-
-2001/03/06 yduret
-
- * bootlook.pm: pixelisation
-
-2001/03/06 dam's <damien@mandrakesoft.com>
-
- * install2.pm: corrected bad file search
- corrected intf setting
-
- * standalone/draknet: added enable/disable networking button.
-
- * standalone/drakxconf: updated to be launched frome DrakConf if no
- DISPLAY
-
- * netconnect.pm: now detecting adsl
- typo
- better load_conf
-
- * Xconfigurator.pm: cleaned png displaying
-
- * common.pm: setinhash -> set_in_hash
- added setinhash
-
- * fs.pm: typo
- use set_in_hash
-
-2001/03/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/cdrom.c: enable probing of all the CDROM drives in automatic
- mode
-
- * mdk-stage1/Makefile: fix includes for init
-
-2001/03/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: corrected some typos, Updated Japanese file
- updated Lithuanian file
-
- * help.pm, standalone/draknet: corrected some typos, Updated Japanese file
-
-2001/03/06 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, any.pm, Xconfigurator.pm: move inittab modifying to
- any::runlevel
-
- * partition_table.pm (add): max number of parts for rd, ida and cciss
-
- * fs.pm, netconnect.pm, common.pm: set_in_hash is now put_in_hash
-
- * diskdrake.pm (Create): pixelization
-
- * fsedit.pm (hds): pixelization
-
- * install_steps_auto_install.pm (@graphical_steps): add
- beforeInstallPackages so that advertisings are there
-
- * modules.pm: add cciss
-
- * install2.pm (main): remove unloading vfat (not needed anymore with
- mdk-stage1)
-
-2001/03/05 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: $mouse->{device} is set if it doesn't exists.
-
- * Makefile: added pixmaps copying
-
-2001/03/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * netconnect.pm, bootlook.pm, help.pm: fixed English typos
-
-2001/03/05 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (generateAutoInstFloppy): use
- generate_automatic_stage1_params
-
- * c/stuff.xs.pm, my_gtk.pm: XSetInputFocus now done in perl-GTK
-
- * install_any.pm (generate_automatic_stage1_params): replace
- generate_ks_cfg
-
-2001/03/05 dam's <damien@mandrakesoft.com>
-
- * Makefile: added pixmaps copying
-
- * standalone/draknet: required gtk only if needed, added redirection to
- newt if needed
-
- * netconnect.pm: $mouse->{device} is set if it doesn't exists.
- corrected short circuit if network install
- corrected bad end message,
- added copying of resolv.conf & modules.conf
-
- * install2.pm: moved askrootpasswd and adduser before network conf
-
- * network.pm: removed old NS0 fetching. /etc/resolv.conf is read in
- install2.pm now
- removed setdefaultroute and sethostname
-
-2001/03/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: Updated Latvian, Belarussian and Spanish files
-
-2001/03/05 Pixel <pixel@mandrakesoft.com>
-
- * lvm.pm (lv_create): fix typo
-
- * bootloader.pm: add use devices
- (install_grub): ensure the translated messages are not too big the hard
- way
-
- * install_any.pm (generate_automatic_stage1_params): replace
- generate_ks_cfg
- (install_urpmi): have "use hdlist ..." in any case
-
- * my_gtk.pm: XSetInputFocus now done in perl-GTK
- (_create_window): don't care about c::XSetInputFocus not existing
-
- * any.pm (setupBootloader): pixelization
- (setupBootloader): fix call to get_append
-
- * interactive.pm (vnew): cleanup
-
- * common.pm (salt): cleanup
-
- * install_steps_interactive.pm (generateAutoInstFloppy): use
- generate_automatic_stage1_params
-
- * c/stuff.xs.pm: XSetInputFocus now done in perl-GTK
-
- * c/Makefile.PL: compile fix
-
- * diskdrake.pm (create_buttons4partitions_): fix for displaying LVM
-
- * Xconfigurator.pm (xtest): use external xtest if standalone
-
- * install2.pm (main): remove unloading vfat (not needed anymore with
- mdk-stage1)
-
-2001/03/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- diskdrake.pm, share/po/af.po: updated po files
-
-2001/03/04 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Add2LVM): fix bug (causing empty list), make cancel work
-
- * share/rpmsrate:
- - remove autologin
- - move X11R6-contrib to DEVELOPEMENT and lower rate
-
-2001/03/04 stew <sbenedict@mandrakesoft.com>
-
- * any.pm - changes to enable yaboot configuration for PPC
-
- * diskdrake.pm, fs.pm, partition_table.pm isBootstrap -> isAppleBootstrap
-
- * install_steps_interactive.pm - auto-add Apple Bootstrap - PPC
-
-2001/03/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, fsedit.pm, lvm.pm, standalone/diskdrake,
- install_interactive.pm, install2.pm: small fixes for LVM
-
- * diskdrake.pm: don't default the LVM name to 'pp' ;pp
- small fixes for LVM
-
-2001/03/03 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: small fixes for LVM
- (doPartitionDisksAfter): small adaptation for LVMs
- use run_or_die
-
- * fsedit.pm: small fixes for LVM
- (hds): detect LVMs and return them
- (add): handling of LVMs
- (@partitions_signatures): add new magic of reiserfs
-
- * bootloader.pm: use run_or_die
-
- * run_program.pm (run_or_die, rooted_or_die): created
-
- * install_steps_interactive.pm: cleanup
-
- * install_any.pm (getHds): handle LVMs. $o->{lvms} contain them
- (setPackages): ask for installation of package lvm when needed
- (suggest_mount_points, find_root_parts): take $fstab as arg instead of
- $hds
-
- * install2.pm: small fixes for LVM
- (formatPartitions): call vgscan if needed when / is mounted
-
- * devices.pm (make): better caller in error
-
- * share/list: add progs for LVM handling
-
- * install_interactive.pm: small fixes for LVM
-
- * diskdrake.pm: small fixes for LVM
- - addition of drive to notebook cleaned
- - various clean-up
- - handling of LVMs
-
- * standalone/diskdrake: small fixes for LVM
- small adaptation
-
- * lvm.pm: small fixes for LVM
- creation
-
- * partition_table.pm: add isLVMBased
-
-2001/03/02 stew <sbenedict@mandrakesoft.com>
-
- * commands.pm - fdisk locks up machine on report_bug - replace with pdisk PPC
-
- * install_steps.pm - no bootfloppy, added yaboot.conf - PPC
-
- * install_interactive.pm - pdisk vs. fdisk - PPC
-
- * bootloader.pm - added code to create yaboot.conf, run ybin - vmlinux vs. vmlinuz
-
-2001/03/02 stew <sbenedict@mandrakesoft.com>
-
- * c/smp.c -stanza for PPC
-
- * detect_devices.pm - added code for MO devices
-
- * help.pm - help information for yaboot - PPC
-
- * partition_table.pm - PPC mods
-
- * partition_table_mac.pm - PPC mods
-
- * modules.pm - PPC mods - parallel port not used
-
- * diskdrake.pm - PPC mods - display like pdisk
-
- * install2.pm - PPC mod - no bootdisk
-
- * fs.pm - bootstrap partition - PPC
-
-2001/02/27 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: pop up a dialog to quit X when accepting
- configuration
-
-2001/02/27 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_raw.pm (@MBR_signatures): add yet another grub signature
-
- * devices.pm (entry): add fd0H1440 and fd1H1440
-
- * bootloader.pm (mkbootdisk): fix for mkbootdisk using fd0H1440. Must be
- created
-
-2001/02/26 dam's <damien@mandrakesoft.com>
-
- * Makefile.drakxtools, pixmaps/hori.xpm, pixmaps/tradi.xpm,
- pixmaps/eth_card_mini.xpm, pixmaps/verti.xpm: new pixmap policy
-
- * Makefile: typo
- new pixmap policy
-
- * bootlook.pm: typo
- new pixmap policy
- need to be merged with bootloader
-
- * standalone/draknet: reincluded Gtk + init Gtk
- thiskind -> thiskind_backend
- new pixmap policy
-
- * standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po,
- share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: Fixed i18n_compssUsers
- script to produce a correct pot file
- Updated Estonian and Walloon files
-
- * bootlook.pm: changed I_() to _() so xgettext cna find the translatable
- strings
-
-2001/02/26 Pixel <pixel@mandrakesoft.com>
-
- * standalone/drakgw: pixelization
-
- * install_steps.pm: remove unneeded "use install_interactive"
-
- * install_steps_gtk.pm (copy_advertising): fix changing for
- advertising_images
-
-2001/02/26 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: should correct bad resolv.conf when swithcinf in
- standalone embedded mode. Not Certified
- fixed standalone edition
- corrected wizard mode.
-
- * Makefile.drakxtools, Makefile, pixmaps/eth_card_mini.xpm: new pixmap
- policy
-
- * standalone/draknet: new pixmap policy
- fixed standalone edition
-
- * bootlook.pm: need to be merged with bootloader
-
- * interactive_gtk.pm: if wizard, show the button
-
- * standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (if_): fix for use in scalar context
-
- * install_steps_interactive.pm (summary): translate mouse description
-
- * install_steps.pm: remove unneeded "use install_interactive"
-
- * install_steps_gtk.pm (copy_advertising): fix changing for
- advertising_images
-
-2001/02/26 warly
-
- * share/compssUsers, share/rpmsrate: remove some packages
-
-2001/02/26 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: if wizard, show the button
-
- * netconnect.pm: corrected wizard mode.
-
-2001/02/26 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (if_): fix for use in scalar context
-
- * install_steps_interactive.pm (summary): translate mouse description
-
-2001/02/25 dam's <damien@mandrakesoft.com>
-
- * share/logo-mandrake-Firewall.xpm, share/logo-mandrake.xpm: changed logo.
-
- * netconnect.pm: profile handling.
- profile handling
- corrected wizard.
-
- * standalone/draknet: profile handling.
- profile handling
-
- * install_steps_interactive.pm: updated
-
-2001/02/25 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): move the load_deps before all the loadO's
-
- * install_any.pm (g_auto_install): have formatMountPartitions graphical if
- $graphical
-
- * install_steps_interactive.pm (generateAutoInstFloppy): use "timeout 1"
- for replay
-
- * interactive_gtk.pm (ask_from_entries_refW): ensure "advanced" lists
- center the chosen value
-
-2001/02/24 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, install2.pm: move writing to config files from
- install2::selectKeyboard to install_steps
-
- * share/list, Makefile, tools/i386/mkreiserfs: for now, have mkreiserfs in
- the CVS since the current cooker version is too recent
-
- * commands.pm (more): handle 'q' to quit
-
-2001/02/24 Pixel <pixel@mandrakesoft.com>
-
- * c/Makefile (stuff): fix the fix's fix :'-(
-
- * detect_devices.pm (pci_probe): fix to clean the log
-
- * install_steps_interactive.pm (setRootPassword): NIS server must be
- editable
-
-2001/02/23 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (g_auto_install): handle $replay flag. It means a 'not
- fully automated install'.
-
- * install_steps_auto_install.pm (@graphical_steps): specify which step
- should be interactive
-
- * c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-
- * install_steps.pm (afterInstallPackages): no kdm UserView in NIS
- (configurePrinter): if_'ization
-
- * install_steps_interactive.pm (exitInstall): ask wether Replay or
- Automated
- (generateAutoInstFloppy): handle $replay flag. It means a 'not fully
- automated install'.
- (summary): nicer mouse name
-
-2001/02/23 dam's <damien@mandrakesoft.com>
-
- * network.pm, standalone/draknet, netconnect.pm, my_gtk.pm: new wizard
- layout, no use gtk in draknet, minor bugfixes
-
-2001/02/23 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: added accessor the rpmsrate data of packages.
- avoid rebuilding the database for oem, rpm db is assumed to be fine.
-
- * rescue/make_rescue_img: removed kernel_reread program.
-
- * rescue/tree/etc/oem: removed server from selection.
- added mutli CD support to OEM (NFS/DVD transparent)
- fixed selection of package now select much more than before.
- fixed root partition size set to the minimum.
-
-2001/02/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/rpmsrate: move xterm to SYSTEM
-
-2001/02/23 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: move the 'use my_gtk' in 'require my_gtk' and only if
- needed
-
- * install_steps_auto_install.pm (@graphical_steps): specify which step
- should be interactive
-
- * c/stuff.xs.pm: hack for macroporcessing in term.h
- use C_DRAKX
-
- * install_steps.pm (afterInstallPackages): no kdm UserView in NIS
- (configurePrinter): if_'ization
-
- * share/rpmsrate: add packages installed on demand by DrakX. they are
- specifically flagged
- or flagged 'INSTALL'
-
- * perl2fcalls: handling of ``package''->import(``what to import'')
-
- * interactive.pm (vnew): use /usr/X11R6/bin/xtest instead of c::Xtest
-
- * Makefile (tar-drakxtools): C_RPM and C_DRAKX set to 0
-
- * install_any.pm (g_auto_install): handle $replay flag. It means a 'not
- fully automated install'.
-
- * c/Makefile.PL: use C_DRAKX
-
- * pkgs.pm (setSelectedFromCompssList): fix the fix
-
- * c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
- add setting C_DRAKX to 1 by default
-
- * install_steps_interactive.pm (exitInstall): ask wether Replay or
- Automated
- (generateAutoInstFloppy): handle $replay flag. It means a 'not fully
- automated install'.
- (summary): nicer mouse name
-
-2001/02/23 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_entries_refW): double clicking on list
- means 'Ok'
-
- * pkgs.pm (setSelectedFromCompssList): fix sillyness
-
-2001/02/22 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corected infinite loop
-
-2001/02/22 François Pons <fpons@mandrakesoft.com>
-
- * rescue/tree/etc/oem: minor cleanup to edit partition size more easily.
- brand new version written in perl, support repartitionning on the fly of
- the
- hard disk and resize of already present FAT partition.
-
- * rescue/list.i386, rescue/list, rescue/Makefile: make rescue build a bit
- more cleaner (added dependancy).
- added missing file for rescue to enable new oem install.
-
-2001/02/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/insmod-modutils/include/elf_hppa64.h,
- mdk-stage1/insmod-modutils/util/alias.h,
- mdk-stage1/insmod-modutils/util/xstrcat.c,
- mdk-stage1/insmod-modutils/util/gzfiles.c,
- mdk-stage1/insmod-modutils/include/elf_arm.h,
- mdk-stage1/insmod-modutils/util/sys_qm.c,
- mdk-stage1/insmod-modutils/util/modstat.c,
- mdk-stage1/insmod-modutils/obj/obj_sparc.c,
- mdk-stage1/insmod-modutils/include/elf_m68k.h,
- mdk-stage1/insmod-modutils/Makefile,
- mdk-stage1/insmod-modutils/util/xstrdup.c,
- mdk-stage1/insmod-modutils/obj/obj_arm.c,
- mdk-stage1/insmod-modutils/obj/obj_m68k.c,
- mdk-stage1/insmod-modutils/obj/obj_hppa64.c,
- mdk-stage1/insmod-modutils/include/elf_sparc64.h,
- mdk-stage1/insmod-modutils/util/sys_dm.c,
- mdk-stage1/insmod-modutils/include/elf_s390.h,
- mdk-stage1/insmod-modutils/obj/obj_s390.c,
- mdk-stage1/insmod-modutils/util/xmalloc.c,
- mdk-stage1/insmod-modutils/util/xsystem.c, mdk-stage1/insmod.h,
- mdk-stage1/insmod-modutils/util/xftw.c,
- mdk-stage1/insmod-modutils/include/elf_i386.h,
- mdk-stage1/insmod-modutils/util/sys_gks.c,
- mdk-stage1/insmod-modutils/util/snap_shot.c,
- mdk-stage1/insmod-modutils/obj/obj_i386.c, mdk-stage1/modules.c,
- mdk-stage1/stage1.c, mdk-stage1/insmod-modutils/include/obj.h,
- mdk-stage1/insmod-modutils/include/elf_ppc.h,
- mdk-stage1/insmod-modutils/obj/obj_reloc.c,
- mdk-stage1/insmod-modutils/include/elf_sparc.h,
- mdk-stage1/insmod-modutils/util/sys_nim.c,
- mdk-stage1/insmod-modutils/obj/obj_ppc.c, mdk-stage1/Makefile,
- mdk-stage1/insmod-modutils/include/elf_hppa.h,
- mdk-stage1/insmod-busybox/insmod.c,
- mdk-stage1/insmod-modutils/util/meta_expand.c,
- mdk-stage1/insmod-modutils/util/arch64.c,
- mdk-stage1/insmod-modutils/obj/obj_load.c,
- mdk-stage1/insmod-modutils/obj/obj_hppa.c,
- mdk-stage1/insmod-busybox/insmod.h,
- mdk-stage1/insmod-modutils/include/elf_ia64.h,
- mdk-stage1/insmod-modutils/obj/obj_ia64.c,
- mdk-stage1/insmod-modutils/obj/obj_sparc64.c,
- mdk-stage1/insmod-modutils/include/elf_mips.h,
- mdk-stage1/insmod-modutils/include/module.h,
- mdk-stage1/insmod-modutils/obj/obj_mips.c,
- mdk-stage1/insmod-modutils/util/sys_cm.c,
- mdk-stage1/insmod-modutils/obj/obj_alpha.c,
- mdk-stage1/insmod-modutils/include/kerneld.h,
- mdk-stage1/insmod-modutils/util/xrealloc.c,
- mdk-stage1/insmod-modutils/obj/Makefile,
- mdk-stage1/insmod-modutils/insmod-frontend.c,
- mdk-stage1/insmod-modutils/obj/obj_common.c,
- mdk-stage1/insmod-modutils/include/modstat.h,
- mdk-stage1/insmod-modutils/util/Makefile,
- mdk-stage1/insmod-modutils/include/config.h,
- mdk-stage1/insmod-modutils/util/logger.c,
- mdk-stage1/insmod-modutils/obj/obj_kallsyms.c,
- mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/include/util.h,
- mdk-stage1/insmod-modutils/util/config.c,
- mdk-stage1/insmod-modutils/include/version.h,
- mdk-stage1/insmod-modutils/include/kallsyms.h,
- mdk-stage1/insmod-modutils/include/elf_alpha.h,
- mdk-stage1/insmod-modutils/util/sys_oim.c,
- mdk-stage1/insmod-modutils/insmod.c: use modutils for non Intel arch's
-
-2001/02/22 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
- not
- over existing /etc/fstab. Fix some stupid stuff
-
- * modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
- * install2.pm (main): don't set a special $remote_path PATH for
- postInstallNonRooted
- (otherwise install's modprobe is not used, and you can't "modprobe
- vfat",
- even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
- found.
-
- * my_gtk.pm (create_box_with_title): disallow focusing on text if it is
- non-scrolled
-
-2001/02/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/minilibc.c,
- mdk-stage1/init-libc-headers.h,
- mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/Makefile,
- mdk-stage1/init.c, mdk-stage1/minilibc.h,
- mdk-stage1/dietlibc/include/unistd.h,
- mdk-stage1/dietlibc/include/sys/socket.h,
- mdk-stage1/dietlibc/include/signal.h: have "init" compiled against
- dietlibc (rather than glibc) on non-Intel arch's
-
-2001/02/22 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_auto_install.pm: $graphical is now a module variable. Can
- be changed from everywhere
-
- * fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
- not
- over existing /etc/fstab. Fix some stupid stuff
-
- * modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
- * install2.pm (main): don't set a special $remote_path PATH for
- postInstallNonRooted
- (otherwise install's modprobe is not used, and you can't "modprobe
- vfat",
- even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
- found.
-
- * my_gtk.pm (create_box_with_title): disallow focusing on text if it is
- non-scrolled
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): fix setting
- type to 'list' in
- case of format. should be only set if type is unset
- (ask_from_entries_refH_powered_normalize): if list+format then type is
- 'list', combo not accepted (hacky?)
-
- * interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
- call create_okcancel
-
-2001/02/22 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): if list+format
- then type is
- 'list', combo not accepted (hacky?)
-
- * install_steps_auto_install.pm: $graphical is now a module variable. Can
- be changed from everywhere
-
- * interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
- call create_okcancel
-
-2001/02/21 dam's <damien@mandrakesoft.com>
-
- * network.pm, netconnect.pm: netconnect recode, wizard compatible.
- network.pm modified for wizard. Still need work for ask_yesorno,
- ask_okcancel. +debugging of course
-
- * standalone/draknet: updated (don't remember what)
-
-2001/02/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c, mdk-stage1/Makefile,
- mdk-stage1/dietlibc/lib/vprintf.c, mdk-stage1/dietlibc/lib/vfprintf.c,
- mdk-stage1/minilibc.h, mdk-stage1/minilibc.c,
- mdk-stage1/init-libc-headers.h:
- - fix "init" on ppc (do not use minilibc on non-i386 arch's)
- - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
- - cleanup of "init"
-
- * mdk-stage1/init.c:
- - fix "init" on ppc (do not use minilibc on non-i386 arch's)
- - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
- - cleanup of "init"
- fix up syslog logging stuff
-
-2001/02/21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (generateAutoInstFloppy): removed
-
- * install_any.pm (g_auto_install): use selected_leaves for
- default_packages to reduce the
- list of packages (aka cleanup auto_inst.cfg)
- (g_default_packages): created
-
- * install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
- and g_default_packages calls in
- advanced
-
- * netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
- * pkgs.pm (selected_leaves): created
-
- * install2.pm (main): do postInstallNonRooted before postInstall (so that
- 'modprobe
- vfat' can be done in postInstallNonRooted and used in postInstall)
- - move the loadO of patch/defcfg after loading modules.dep
- - generateAutoInstFloppy is no more a step
- - removed use Data::Dumper
-
-2001/02/21 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * share/rpmsrate: Add iputils to SYSTEM.
-
-2001/02/21 dam's <damien@mandrakesoft.com>
-
- * docs/wizard.doc: putain de doc de merde pout petite qui est trop débile
-
- * interactive.pm, my_gtk.pm: corrected wizard mode.
-
-2001/02/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/TECH-INFOS: sync doc with disk automatic installs
-
- * mdk-stage1/disk.c: add support for automatic (ex-kickstart) in disk
- installs
-
-2001/02/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2001/02/21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (generateAutoInstFloppy): removed
-
- * install_any.pm (g_auto_install): use selected_leaves for
- default_packages to reduce the
- list of packages (aka cleanup auto_inst.cfg)
- (g_default_packages): created
-
- * install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
- and g_default_packages calls in
- advanced
-
- * netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
- * pkgs.pm (selected_leaves): created
-
- * install2.pm (main): do postInstallNonRooted before postInstall (so that
- 'modprobe
- vfat' can be done in postInstallNonRooted and used in postInstall)
- - move the loadO of patch/defcfg after loading modules.dep
- - generateAutoInstFloppy is no more a step
- - removed use Data::Dumper
-
-2001/02/20 Pixel <pixel@mandrakesoft.com>
-
- * printerdrake.pm: fix typo
-
- * install_steps.pm, install_steps_gtk.pm, install_any.pm: better
- advertising support
-
-2001/02/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/url.h, mdk-stage1/url.c, mdk-stage1/network.c: for HTTP
- installs, make use of Content-Length when available, to display
- progressbar
-
-2001/02/20 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: various
- - pcmcia_config.patch now in tools (no more in install which is
- removed)
- - copy xpm's (until step icons work with png's)
- - transform group icons in pngs
-
- * modules.pm, class_discard.pm, my_gtk.pm, Xconfigurator.pm: various
-
- * tools/pcmcia_config.patch: pcmcia_config.patch now here
-
- * printerdrake.pm: fix typo
-
- * install_any.pm, install_steps.pm, install_steps_gtk.pm: better
- advertising support
-
-2001/02/20 warly
-
- * share/compssUsers, share/rpmsrate, share/compssList: update rpmsrate
-
-2001/02/20 François Pons <fpons@mandrakesoft.com>
-
- * c/stuff.xs.pm, live_install, pkgs.pm, live_install2: added RPMRC_FILE
- env variable to choose rpmrc file for rpmlib used
- by DrakX, neccessary for live update from a 7.2 or older.
- Check that if something goes wrong with rebuilddb, avoid removing
- old rpm-3 db files.
- Make sure live_install can start from top directory too.
-
-2001/02/20 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: various
- - pcmcia_config.patch now in tools (no more in install which is
- removed)
- - copy xpm's (until step icons work with png's)
- - transform group icons in pngs
-
- * modules.pm, class_discard.pm: various
-
- * tools/pcmcia_config.patch: pcmcia_config.patch now here
-
- * my_gtk.pm, Xconfigurator.pm: various
- major move. now ask_from_list returns false when canceled (it doesn't
- die 'ask_from_list canceled' anymore)
-
- * interactive_gtk.pm, standalone/mousedrake, install_steps_interactive.pm,
- netconnect.pm, standalone/keyboarddrake, install2.pm, interactive.pm,
- any.pm, printerdrake.pm, diskdrake.pm: major move. now ask_from_list
- returns false when canceled (it doesn't die 'ask_from_list canceled'
- anymore)
-
-2001/02/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c: try to print errno's stuff when symlink to
- /tmp/stage2 failed
-
- * mdk-stage1/dhcp.c: ARP_MAX_RETRIES: s/5/4
-
-2001/02/19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated Estonian file
-
-2001/02/19 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_listf_no_check): die 'ask_from_list cancel' on
- cancel
-
- * my_gtk.pm (create_packtable): don't use attach_raw anymore (was a
- sillyme)
-
-2001/02/18 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: typo
- make fbastok happy about button placement.
- little improvements.
-
-2001/02/16 dam's <damien@mandrakesoft.com>
-
- * install_gtk.pm: corrected xpm mask
-
- * network.pm: wireless eth support corrected.
-
- * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
- share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
- share/step-orange-on.xpm, share/step-green-on.xpm,
- share/step-red-click.xpm: re added these xpm files against display mask
- pb.
-
-2001/02/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/init.c: better ansi colors
-
- * mdk-stage1/dhcp.c: comply with glibc-2.2.2 more strict headers
-
- * mdk-stage1/stdio-frontend.c: display more nicely when there is a long
- list to choose from (1, 2 or 4 columns)
-
-2001/02/15 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/TECH-INFOS, mdk-stage1/README: update doc
-
-2001/02/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: updated Azeri file
-
-2001/02/15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): fix i_images
-
- * fsedit.pm (suggestions_mntpoint): fix
-
-2001/02/15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): fix i_images
- (installPackages): traktolpilization and advertising
-
- * Makefile (get_needed_files): copy png files instead of xpm's
-
- * fsedit.pm (suggestions_mntpoint): fix
-
- * my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
- * share/list: add GdkImlib stuff
-
- * perl2fcalls: add Gtk::Gdk::ImlibImage
-
- * install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
- if it exists
-
-2001/02/15 dam's <damien@mandrakesoft.com>
-
- * my_gtk.pm, any.pm, install_gtk.pm, install_steps_interactive.pm,
- install_steps_gtk.pm, interactive_gtk.pm: added png support. Need to
- test the faces2xpm stuff.
-
- * share/step-orange-click.xpm, share/rpm-selected.xpm,
- share/step-green-click.xpm, share/step-green.xpm, share/rpm-base.xpm,
- share/ftin.xpm, share/step-orange-on.xpm, share/ftout.xpm,
- share/step-red-click.xpm, share/step-green-on.xpm,
- share/rpm-unselected.xpm, share/step-red.xpm, share/step-orange.xpm,
- share/reload.xpm, share/rpm-semiselected.xpm,
- share/logo-mandrake-Desktop.xpm, share/rpm-installed.xpm,
- share/step-red-on.xpm: removed, png are used instead.
-
- * standalone/draknet: updated internet and added eth conf
-
- * share/help.xpm, share/logo-mandrake.xpm: removed, png are used instead.
- added png images
-
- * share/step-red.png, share/step-orange.png, share/reload.png,
- share/logo-mandrake.png, share/rpm-semiselected.png,
- share/logo-mandrake-Desktop.png, share/rpm-installed.png,
- share/logo-mandrake_sav.png, share/step-red-on.png, share/help_sav.png,
- share/rpm-selected.png, share/step-orange-click.png,
- share/step-green-click.png, share/step-green.png, share/rpm-base.png,
- share/logo-mandrake2.png, share/ftin.png, share/help.png,
- share/step-orange-on.png, share/step-green-on.png, share/ftout.png,
- share/step-red-click.png, share/step-green_s.png, share/themes-mdk.rc,
- share/rpm-unselected.png: added png images
-
-2001/02/15 Pixel <pixel@mandrakesoft.com>
-
- * Makefile (get_needed_files): copy png files instead of xpm's
-
- * install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
- if it exists
- (selectKeyboard): give clicked as parameter
-
- * my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
- * fsedit.pm (suggestions_mntpoint): fix typo
-
- * share/list: add GdkImlib stuff
-
- * perl2fcalls: add Gtk::Gdk::ImlibImage
-
- * install_steps_interactive.pm (summary): better message for i18n
-
- * install_steps_gtk.pm (installPackages): traktolpilization and
- advertising
-
-2001/02/14 dam's <damien@mandrakesoft.com>
-
- * network.pm, standalone/draknet: wireless updated
-
- * share/help.xpm, share/themes-mdk.rc, share/logo-mandrake.xpm: valentin
- theme :)
-
-2001/02/14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): add user in group usb
-
-2001/02/14 dam's <damien@mandrakesoft.com>
-
- * share/themes-mdk.rc: valentin theme :)
- added drawing theme section
-
- * network.pm: wireless updated
- updated wireless eth support
-
- * standalone/draknet: wireless updated
-
- * share/help.xpm, share/logo-mandrake.xpm: valentin theme :)
-
-2001/02/13 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: network con initiated in draknet.
- netconnect improvement.
- typo
-
- * network.pm: typo
- corrected domainname setting
-
- * standalone/draknet: network con initiated in draknet.
- netconnect improvement.
-
-2001/02/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/frontend.h, mdk-stage1/network.h,
- mdk-stage1/stdio-frontend.c, mdk-stage1/dhcp.c, mdk-stage1/automatic.c,
- mdk-stage1/newt-frontend.c, mdk-stage1/automatic.h, mdk-stage1/disk.c,
- mdk-stage1/network.c: write down Magic Callback (tm) for static ip stuff
-
- * mdk-stage1/modules.c: ask for modules parameters everytime in expert
- mode, to avoid wrong autodetections in certain cases
- - better log of nfs mount errors
- - don't insmod modules already present (important for bzip2 slowness)
-
- * mdk-stage1/cdrom.c: better error msg thx to mcdtg
-
- * mdk-stage1/mount.c, mdk-stage1/nfsmount.c:
- - better log of nfs mount errors
- - don't insmod modules already present (important for bzip2 slowness)
-
- * mdk-stage1/stage1.c, mdk-stage1/init.c: use exit code 66 for rescue
- better console messages at startup
-
-2001/02/13 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: profile handling updated
-
- * network.pm: typo
- corrected domainname setting
-
- * netconnect.pm: finished load_conf
-
-2001/02/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/make_rescue_img, rescue/list: include libs for hostname resolving
-
- * mdk-stage1/stage1.c, mdk-stage1/init.c: better console messages at
- startup
-
- * mdk-stage1/tools.c:
- - save /etc/resolv.conf for rescue
-
-2001/02/13 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectKeyboard): can be automatic only in
- non-expert
-
- * any.pm: md5 now done via crypt
-
- * install_steps.pm (exitInstall): catch exception of output report.bug
- (for gc)
-
-2001/02/13 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectKeyboard): can be automatic only in
- non-expert
-
- * tools/cvslog2changelog.pl: fix for gc & fpons
- fix for fredl broken CVS
-
- * any.pm: md5 now done via crypt
-
- * install_steps.pm (exitInstall): catch exception of output report.bug
- (for gc)
-
-2001/02/13 dam's <damien@mandrakesoft.com>
-
- * network.pm: experimental wireless eth support. Not tested
-
-2001/02/13 Pixel <pixel@mandrakesoft.com>
-
- * tools/cvslog2changelog.pl: fix for gc & fpons
- fix for fredl broken CVS
-
- * c/stuff.xs.pm, c/Makefile.PL, c/md5.h, c/md5_crypt.c, c/md5.c: md5 can
- be done via crypt of glibc, so remove all this
-
-2001/02/13 dam's <damien@mandrakesoft.com>
-
- * any.pm: merging difference
-
- * netconnect.pm: corrected profile handling
-
- * network.pm: experimental wireless eth support. Not tested
-
-2001/02/12 Pixel <pixel@mandrakesoft.com>
-
- * tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
- docs, rescue, tools)
-
-2001/02/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/probing.c: do not close un unbound socket!!
-
- * c/stuff.xs.pm: close socket everytime in hasNetDevice
-
- * mdk-stage1/Makefile: tag it 8.0beta instead of 8.0, to avoid future
- potential confusions
-
- * modules.pm: re include some network modules
-
-2001/02/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * rescue/list: fix vi trouble
- - add lspci, lspcidrake, vim-minimal
- - better /etc/issue
- - better PS1
- - write embryonic tool (installation of detected drivers according to
- pci cards)
-
- * rescue/aliases, rescue/tree/etc/issue: fix vi trouble
-
- * rescue/list.i386, rescue/make_rescue_img, rescue/drvinst:
- - add lspci, lspcidrake, vim-minimal
- - better /etc/issue
- - better PS1
- - write embryonic tool (installation of detected drivers according to
- pci cards)
-
-2001/02/12 Pixel <pixel@mandrakesoft.com>
-
- * rescue/drvinst: pixelization
-
- * docs/README: fix doc about Mandrake/base/compss
-
- * install_steps_gtk.pm (choosePackagesTree): non first choice packages are
- in "Other".
-
- * install_interactive.pm, any.pm, fsedit.pm, diskdrake.pm: auto_allocate
- partitions choice modified. diskdrake in expert asks what kind
- of auto_allocation is wanted, others choose 'simple' in
- %fsedit::suggestions
-
- * install2.pm: auto_allocate partitions choice modified. diskdrake in
- expert asks what kind
- of auto_allocation is wanted, others choose 'simple' in
- %fsedit::suggestions
- (main): gc has done it again! /tmp/conf.modules is now
- /etc/modules.conf,
- so load both to keep compatibility.
-
- * my_gtk.pm: cleanup (remove ask_from_list and _ask_from_list)
-
- * interactive_gtk.pm (ask_from_entries_refW): use
- $common->{advanced_label}
- (create_ctree): add keyboard shortcuts
- (create_clist): moveto only if row_is_visible
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): advanced_label
- defaults to
- _("Advanced")
-
- * tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
- docs, rescue, tools)
-
- * install_steps_interactive.pm (configurePrinter): cleanup,
- pkg_install_if_requires_satisfied('xpp',
- 'kups') only if a printer is configured (for the case when _("Would you
- like to configure a printer?") is answered no)
-
- * rescue/tree/etc/rc.sysinit: add floppy module for 2.4
-
-2001/02/10 Pixel <pixel@mandrakesoft.com>
-
- * standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
- * install_any.pm: add preConfigureTimezone
- add step summary. remove steps configureTimezone and configurePrinter
-
- * install_interactive.pm: cleanup
-
- * standalone/keyboarddrake, share/keymaps_generate, keyboard.pm:
- - lang2keyboards handle keyboard percentages
- - xmodmaps now named keyboards
-
- * install_steps_interactive.pm: add step summary. remove steps
- configureTimezone and configurePrinter, modify selectKeyboard
-
- * install2.pm, timezone.pm, install_steps.pm: add step summary. remove
- steps configureTimezone and configurePrinter
-
- * netconnect.pm: corrected back $install call
-
-2001/02/10 Pixel <pixel@mandrakesoft.com>
-
- * standalone/keyboarddrake, share/keymaps_generate, keyboard.pm:
- - lang2keyboards handle keyboard percentages
- - xmodmaps now named keyboards
-
- * install_steps_interactive.pm: add step summary. remove steps
- configureTimezone and configurePrinter, modify selectKeyboard
-
- * standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
- * install_any.pm: add preConfigureTimezone
- add step summary. remove steps configureTimezone and configurePrinter
-
- * install2.pm, timezone.pm, install_steps.pm: add step summary. remove
- steps configureTimezone and configurePrinter
-
- * install_interactive.pm: cleanup
-
- * netconnect.pm: corrected back $install call
-
-2001/02/09 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm, install2.pm,
- timezone.pm: configureTimezone doesn't take parameter
- /etc/sysconfig/clock
-
-2001/02/09 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm, interactive.pm, interactive_newt.pm: add button
- handling, quite weird behaviour though cuz of newt sillyness
-
- * install2.pm: configureTimezone doesn't take parameter
- /etc/sysconfig/clock
- (main): have compatibility with old stage1 (rhimage -> image)
- (formatPartitions):
- s|etc/sysconfig/consoletrans|etc/sysconfig/console/consoletrans|
- as it should now be (see lang.pm 1.143)
-
- * install_steps.pm, install_steps_interactive.pm, timezone.pm:
- configureTimezone doesn't take parameter /etc/sysconfig/clock
-
-2001/02/09 siegel
-
- * share/po/de.po: new german version
-
-2001/02/08 dam's <damien@mandrakesoft.com>
-
- * standalone/drakgw: implemented or updated embedded mode
- added embedded and (ugly) wizard mode.
-
- * standalone/printerdrake, standalone/mousedrake, standalone/diskdrake,
- standalone/keyboarddrake: implemented or updated embedded mode
-
- * standalone/draknet: implemented or updated embedded mode
- added embedded mode
-
- * standalone/XFdrake: implemented or updated embedded mode
- corrected compilation bug.
-
- * standalone/drakboot: implemented or updated embedded mode
- updated embedded mode. Should work, not tested in real world
-
- * netconnect.pm: removed testing wizard instruction
-
-2001/02/08 François Pons <fpons@mandrakesoft.com>
-
- * ftp.pm: fixed wrong URLPREFIX formation if no user given.
-
- * standalone/XFdrake: fix the previous changelog wich was wrong (bad
- spelling),
- added a char in comment to allow a new release (thanks to pixel :-)
- make sure SHARE_PATH is set.
- fixed SHARE_PATH to make sure it is setted.
-
- * Xconfigurator.pm: added DRI experimental support (sis, radeon). Prefer
- XF3 for SiS card.
-
- * pkgs.pm: fixed problem for updating hdlist after going back to partition
- step.
-
-2001/02/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c, mdk-stage1/config-stage1.h, mdk-stage1/network.c:
- better memory detection (from wonderful drakx)
-
-2001/02/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated Norwegian file
-
-2001/02/08 Pixel <pixel@mandrakesoft.com>
-
- * common.pm (availableRamMB): cleanup
-
- * standalone.pm, standalone/XFdrake: make sure SHARE_PATH is set now in
- standalone
-
-2001/02/07 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed unknown package ARRAY... and locales selection
- according to langs.
-
- * modules.pm: fixed module name without text for SCSI configuration
- dialog, add log.
-
-2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/probing.h, mdk-stage1/stage1.h,
- mdk-stage1/tools.c, mdk-stage1/automatic.c, mdk-stage1/init.c,
- mdk-stage1/probing.c, mdk-stage1/automatic.h, mdk-stage1/modules.c,
- mdk-stage1/network.c:
- - use description of network cards when you have to select between
- interfaces; has accuracy even in the case of multiple interface for a
- given kernel module
- - write down a small "shell" to change parameters on the fly (needs
- compile option SPAWN_INTERACTIVE)
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): better fix for getting
- max install size.
- (choosePackages): call setSelectedFromCompssList with empty
- compssUsersChoice meaning max
-
- * common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixed unknown package ARRAY... and locales selection
- according to langs.
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): better fix for getting
- max install size.
- (choosePackages): call setSelectedFromCompssList with empty
- compssUsersChoice meaning max
-
- * common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
- 8.0
-
- * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
- hostname+domain
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
- * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
- * install_steps_interactive.pm (miscellaneous): remove asking about
- numlock and hd optimizations,
- deprecates it (aka don't do anything)
-
- * Xconfigurator.pm (main): don't need isLaptop anymore, use
- detect_devices::hasPCMCIA
-
- * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
- value of memsize
- if given
- (install): save CLEAN_TMP in sysconfig/system
- (get_append, add_append): get or set an append value
- (has_profiles, set_profiles): get or add an entry office for profiles,
- also add prof=Home in
- the default entry
-
- * any.pm (setupBootloader): take care of profiles and memsize
- (facesnames): only display icons capitalized. This goes along the new
- mandrake_desk where capitalized named faces are the new one. [a-z].*
- icons
- being only kept for compatibility. (in case no capitalized icons
- available
- display everything (compatibility with old mandrake_desk)
-
- * standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
- * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
- taking care of
- profiles and memsize. Now in any & bootloader
- (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
- $o->{miscellaneous} anymore
-
- * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
- * netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
- * install2.pm (@installSteps): remove miscellaneous
- (main): don't remove pcmcia modules anymore (not there anymore), remove
- /sbin/stage1
-
-2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
- 8.0
-
- * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
- hostname+domain
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
- * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
- * install_steps_interactive.pm (miscellaneous): remove asking about
- numlock and hd optimizations,
- deprecates it (aka don't do anything)
-
- * Xconfigurator.pm (main): don't need isLaptop anymore, use
- detect_devices::hasPCMCIA
-
- * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
- value of memsize
- if given
- (install): save CLEAN_TMP in sysconfig/system
- (get_append, add_append): get or set an append value
- (has_profiles, set_profiles): get or add an entry office for profiles,
- also add prof=Home in
- the default entry
-
- * any.pm (setupBootloader): take care of profiles and memsize
- (facesnames): only display icons capitalized. This goes along the new
- mandrake_desk where capitalized named faces are the new one. [a-z].*
- icons
- being only kept for compatibility. (in case no capitalized icons
- available
- display everything (compatibility with old mandrake_desk)
-
- * standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
- * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
- taking care of
- profiles and memsize. Now in any & bootloader
- (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
- $o->{miscellaneous} anymore
-
- * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
- * netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
- * install2.pm (@installSteps): remove miscellaneous
- (main): don't remove pcmcia modules anymore (not there anymore), remove
- /sbin/stage1
-
-2001/02/07 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * share/rpmsrate: Add usbd to SYSTEM.
-
-2001/02/07 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: updated wizard mode, intro and other stuff
-
- * interactive_gtk.pm, interactive.pm, my_gtk.pm: updated wizard mode
-
- * share/logo-mandrake.xpm: new logo
-
-2001/02/07 François Pons <fpons@mandrakesoft.com>
-
- * http.pm, ftp.pm, pkgs.pm: now fully fixed ftp connection (and http too)
- caused by forked DrakX
- with latent ftp connection.
-
-2001/02/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
- 8.0
-
- * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
- hostname+domain
-
-2001/02/07 Pixel <pixel@mandrakesoft.com>
-
- * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
- * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
- * install_steps_interactive.pm (miscellaneous): remove asking about
- numlock and hd optimizations,
- deprecates it (aka don't do anything)
-
- * Xconfigurator.pm (main): don't need isLaptop anymore, use
- detect_devices::hasPCMCIA
-
- * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
- value of memsize
- if given
- (install): save CLEAN_TMP in sysconfig/system
- (get_append, add_append): get or set an append value
- (has_profiles, set_profiles): get or add an entry office for profiles,
- also add prof=Home in
- the default entry
-
- * any.pm (setupBootloader): take care of profiles and memsize
- (facesnames): only display icons capitalized. This goes along the new
- mandrake_desk where capitalized named faces are the new one. [a-z].*
- icons
- being only kept for compatibility. (in case no capitalized icons
- available
- display everything (compatibility with old mandrake_desk)
-
- * standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
- * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
- taking care of
- profiles and memsize. Now in any & bootloader
- (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
- $o->{miscellaneous} anymore
-
- * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
- * netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
- * install2.pm (@installSteps): remove miscellaneous
- (main): don't remove pcmcia modules anymore (not there anymore), remove
- /sbin/stage1
-
-2001/02/07 siegel
-
- * share/po/de.po: new german version
-
-2001/02/06 François Pons <fpons@mandrakesoft.com>
-
- * ftp.pm: reworked ftp behaviour a bit for cooperative connection (avoid
- opening
- and closing connection too fast for each transaction). There seems
- to be some problem for retrieving twice a package, this cause huge pause
- between each transaction, the best is to avoid them so ?
-
-2001/02/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/stage1.c,
- mdk-stage1/init.c, mdk-stage1/newt-frontend.c, mdk-stage1/network.c,
- mdk-stage1/modules.c, mdk-stage1/disk.c:
- - slighty change the message when exiting successfully from install,
- to not mess with abnormal termination
- - get back dialog for hostname and domain in case of unable to guess
- domain
- - try to resolve DNS if self-ip can't resolve, to guess domain
- - remember entries so that when there is a problem you don't have to
- re-enter everything (ncurses sucking stuff in case of stdio-frontend..)
- - use larger buffer for list_directory since in /dev there can be
- *many* files
-
-2001/02/05 dam's <damien@mandrakesoft.com>
-
- * Makefile.drakxtools, Makefile: added wizard.rc handling in Makfiles.
-
- * standalone/draknet: added infos recovering.
-
- * netconnect.pm: added load_conf() to recover saved infos from conffile.
-
-2001/02/05 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: removed abusive white char.
- updated to use urpmi new format (change fakemedium to better label)
- fixed frame buffer usage if not enabled (installation of Aurora)
- clean up and remove unused code.
-
- * ftp.pm: rebuild URLPREFIX as stage1 does not provide it anymore.
-
- * pkgs.pm: updated to use urpmi new format (change fakemedium to better
- label)
-
- * Xconfigurator.pm: Removed Device3Dfx as it is no more.
-
- * install_steps.pm: fixed frame buffer usage if not enabled (installation
- of Aurora)
- clean up and remove unused code.
-
-2001/02/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/list: updated list of gconv modules
-
-2001/02/05 Pixel <pixel@mandrakesoft.com>
-
- * commands.pm (head_tail): fix usage
-
- * interactive_gtk.pm (create_ctree): node_moveto done only if
- node_is_visible is not full
-
-2001/02/04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/mar/mar-frontend.c: fix bug when creating marfiles with
- file-not-found in args
-
-2001/02/04 Pixel <pixel@mandrakesoft.com>
-
- * interactive_newt.pm: fix adaptation to the terminal size, should now
- work in 80x25
-
- * Xconfigurator.pm (monitorConfiguration): better handling of auto_install
-
- * install_steps_interactive.pm (choosePackages): don't call
- chooseSizeToInstall even with experts
-
- * install_steps_gtk.pm (charsetChanged): re-create steps window
-
-2001/02/03 dam's <damien@mandrakesoft.com>
-
- * modules.pm, standalone/draknet, netconnect.pm: corrected module.conf
- update, net conf saving, and no wizard by default.
-
-2001/02/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2001/02/03 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
- auto_installs
-
- * install_steps_gtk.pm (charsetChanged): created, takes care of setting to
- the right charset the windows
-
- * install_steps_interactive.pm (selectLanguage): call charsetChanged
-
- * share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
- move ftp to SYSTEM so that it is installed
-
- * Makefile: install cardmgr
-
- * modules.pm (configure_pcmcia): cleanup
-
-2001/02/03 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
- auto_installs
-
- * install_steps_gtk.pm (charsetChanged): created, takes care of setting to
- the right charset the windows
-
- * install_steps_interactive.pm (selectLanguage): call charsetChanged
-
- * share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
- move ftp to SYSTEM so that it is installed
-
- * Makefile: install cardmgr
-
- * modules.pm (configure_pcmcia): cleanup
-
-2001/02/02 dam's <damien@mandrakesoft.com>
-
- * share/wizard.rc: added rc file for wizard mode
-
-2001/02/02 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): better default for DDC probe
- fails and
- auto_install and not provided any info about the monitor
-
- * my_gtk.pm (gtkcreate_xpm): error handling with error message
-
- * share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP
-
- * install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
- /etc/sysconfig/i18n
-
- * mdk-stage1/disk.c (try_with_device): bloody guillaume changed
- /tmp/hdimage to /tmp/disk without even
- telling, changing it back as i don't see any good reason for the move.
-
- * install_any.pm (setPackages): in auto_installs, default to all groups
- chosen, unless
- compssUsersChoice exist. Won't change anything unless compssListLevel is
- used of course
-
- * Xconfigurator_consts.pm: add low_default_monitor for default of
- auto_installs
-
- * interactive_gtk.pm (ask_from_entries_refW): use gtkxpm
-
- * Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
- diskdrake.pm: using the new formatXiB
-
- * detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to
- the fact that kernel
- 2.4 uses /proc/driver/array instead of /proc/array. Also adapted the
- regexp now that ida/c0d0p? is no more at the beginning of the line.
- (get): cleanup, remove hasIDE hasSCSI...
-
- * common.pm (formatXiB): created, format a number in human readable format
-
-2001/02/02 Pixel <pixel@mandrakesoft.com>
-
- * mdk-stage1/disk.c (try_with_device): bloody guillaume changed
- /tmp/hdimage to /tmp/disk without even
- telling, changing it back as i don't see any good reason for the move.
-
-2001/02/02 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm,
- standalone/diskdrake: recoded wizard mode
- corrected some stuff.
- trying not to break draknet for cooker snapshot
-
-2001/02/02 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): better default for DDC probe
- fails and
- auto_install and not provided any info about the monitor
-
- * install_any.pm (setPackages): in auto_installs, default to all groups
- chosen, unless
- compssUsersChoice exist. Won't change anything unless compssListLevel is
- used of course
-
- * share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i
- chose was glibc-2.1 :-(
- this one en_US and seems all right!
-
- * Xconfigurator_consts.pm: add low_default_monitor for default of
- auto_installs
-
- * Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
- diskdrake.pm: using the new formatXiB
-
- * install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
- /etc/sysconfig/i18n
-
- * common.pm (formatXiB): created, format a number in human readable format
-
- * mdk-stage1/disk.c (try_with_device): bloody guillaume changed
- /tmp/hdimage to /tmp/disk without even
- telling, changing it back as i don't see any good reason for the move.
-
-2001/02/01 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: new draknet snapshot. Still unuseable
-
- * interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in
- install.
-
-2001/01/31 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: corected translation and conflict.
-
-2001/01/31 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm: added missing die if modprobe failed on live upgrade.
-
- * pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm
- file
- if everything has been successfull.
-
- * install_steps.pm: changed to clean selection for non expert as used for
- group selection
- because it is not cleaned, need better solution TODO.
-
-2001/01/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES
- BEFORE COLON (:);
- and it is "Profile" and not "Profil")
- CV:
- ----------------------------------------------------------------------
-
-2001/01/31 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackagesTree): created, simple
- ask_many_from_list to choose
- individual packages
- (choosePackages): log for debug
- (choosePackages): don't ask to install in beginner. Max is chosen
- (setRootPassword): help not based on installClass being server or not
- (selectInstallClass): remove installClass choice (was
- normal/devel/server)
- (chooseGroups): fix for individual package selection flag
-
- * netconnect.pm (get_net_device): more cleanup syntax
- (get_net_device): cleanup syntax
-
- * install_steps.pm (selectLanguage): warning for debug
- (miscellaneousBefore): don't use installClass to decide to use
- supermount
- or not. Choice is done on $::corporate. Can't say "no supermount in
- server
- installs" anymore
- (selectInstallClass): emptied
- (setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
- * install_any.pm (g_auto_install): installClass removed
- (setPackages): do not preselect compssUsers entries
-
- * install2.pm (main): don't set installClass=normal meta_class desktop
- (deprecated)
- (miscellaneous): TYPE= removed (was installClass)
- (selectInstallClass): don't set $o->{partitions}. diskdrake will have to
- ask in a set of possibilities
- ($o): replace fclass by fbeginner and fexpert
- ($o): default security level to 2 since it can't be based on
- installClass (deprecated)
-
- * install_steps_gtk.pm: restore window size for time being
-
- * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
- * Xconfigurator.pm (main): better error message for auto_install failing
-
- * interactive.pm (ask_many_from_list): fix sorting
-
- * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
- drakx. Still
- need finding the guilty
-
-2001/01/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: more kbd corrections
- fixed soem keybopard values
-
-2001/01/31 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackagesTree): created, simple
- ask_many_from_list to choose
- individual packages
- (choosePackages): log for debug
- (choosePackages): don't ask to install in beginner. Max is chosen
- (setRootPassword): help not based on installClass being server or not
- (selectInstallClass): remove installClass choice (was
- normal/devel/server)
- (chooseGroups): fix for individual package selection flag
-
- * install_steps.pm (selectLanguage): warning for debug
- (miscellaneousBefore): don't use installClass to decide to use
- supermount
- or not. Choice is done on $::corporate. Can't say "no supermount in
- server
- installs" anymore
- (selectInstallClass): emptied
- (setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
- * install_any.pm (g_auto_install): installClass removed
- (setPackages): do not preselect compssUsers entries
-
- * install2.pm (main): don't set installClass=normal meta_class desktop
- (deprecated)
- (miscellaneous): TYPE= removed (was installClass)
- (selectInstallClass): don't set $o->{partitions}. diskdrake will have to
- ask in a set of possibilities
- ($o): replace fclass by fbeginner and fexpert
- ($o): default security level to 2 since it can't be based on
- installClass (deprecated)
-
- * install_steps_gtk.pm: restore window size for time being
-
- * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
- * Xconfigurator.pm (main): better error message for auto_install failing
-
- * interactive.pm (ask_many_from_list): fix sorting
-
- * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
- drakx. Still
- need finding the guilty
-
-2001/01/30 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: new draknet. unstable
-
- * netconnect.pm: updated
- debugged network card configuration after pixelisation.
-
-2001/01/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from
- trying to set progressbar to more than 100% (rescue is more compressed
- than drakx)
-
- * share/rpmsrate: add ldetect to config stuff I want to have on all
- installs (lspcidrake)
-
-2001/01/30 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm, netconnect.pm, install_interactive.pm:
- adapt format functions given to ask_from_listf. $_ is no more set
-
- * mouse.pm (detect): replace commands::modprobe by modules::load as it
- should (or??)
-
- * perl2etags: adapt to new etags (emacs 21) format
-
- * raid.pm (make): replace commands::modprobe by modules::load as it should
- (or??)
-
- * perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his
- regexps
-
- * share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number
- separator instead of ".".
- The sheer result is:
- "0.6" * 10 gives 0
- "0,6" * 10 gives 6
-
- So i have overwritten misc/LC_NUMERIC with
- /usr/share/locale/en/LC_NUMERIC and
- it works nicely now :)
-
-2001/01/29 dam's <damien@mandrakesoft.com>
-
- * standalone/drakboot: corrected typo
-
-2001/01/29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm:
- - deprecate "hdreiser.img" since we have room for "reiserfs.o" in
- "hd.img"
- - following deprecation of "other.img", reintegrate big modules in
- relevant boot disks
-
-2001/01/29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/po/et.po: updated Estonian file
-
-2001/01/29 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain
- more than one ida/c0d0p*
-
-2001/01/28 dam's <damien@mandrakesoft.com>
-
- * share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated
-
-2001/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
- bug causing reiserfs partitions
- not to be displayed/asked for formatting. The default value being used.
-
- * any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
- bug causing reiserfs partitions
- not to be displayed/asked for formatting. The default value being used.
-
- * any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
- bug causing reiserfs partitions
- not to be displayed/asked for formatting. The default value being used.
-
- * any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28 siegel
-
- * share/po/de.po: new german version
-
-2001/01/26 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: updated embedded mode
-
- * standalone/drakboot: added embedded mode
-
-2001/01/26 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile
- bzlib
-
- * mdk-stage1/stage1.c: restore passing of pcmcia info to stage2
-
- * mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c,
- mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c,
- mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c,
- mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile,
- mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c,
- mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c:
- - use bzlib instead of zlib to reduce overall size
- - take home my own bzlib code to (1) reduce code size with good
- compile options (2) make it compile and link against dietlibc
-
- * mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h,
- mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h,
- mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format
-
-2001/01/26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): prepare for advertising...
-
- * interactive_newt.pm (ask_from_entries_refW): major rework for new
- format, still need work
- (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
- NEWT_FLAG_HIDDEN
- (myTextbox): wrap the text if needed
- (myTextbox): use a vertical scrollbar if needed
-
- * Newt/Newt.xs (newtFormAddGrid): new name for
- newtGridAddComponentsToForm, swap
- parameters for much better understanding
- (newtListboxGetCurrent): returns a SV (together with
- newtListboxAddEntry)
- (newtListboxAddEntry): data is now a SV
-
-2001/01/26 siegel
-
- * share/po/de.po: .
-
-2001/01/26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): prepare for advertising...
-
- * interactive_newt.pm (ask_from_entries_refW): major rework for new
- format, still need work
- (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
- NEWT_FLAG_HIDDEN
- (myTextbox): wrap the text if needed
- (myTextbox): use a vertical scrollbar if needed
-
- * Newt/Newt.xs (newtFormAddGrid): new name for
- newtGridAddComponentsToForm, swap
- parameters for much better understanding
- (newtListboxGetCurrent): returns a SV (together with
- newtListboxAddEntry)
- (newtListboxAddEntry): data is now a SV
-
-2001/01/26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (installPackages): prepare for advertising...
-
- * interactive_newt.pm (ask_from_entries_refW): major rework for new
- format, still need work
- (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
- NEWT_FLAG_HIDDEN
- (myTextbox): wrap the text if needed
- (myTextbox): use a vertical scrollbar if needed
-
- * Newt/Newt.xs (newtFormAddGrid): new name for
- newtGridAddComponentsToForm, swap
- parameters for much better understanding
- (newtListboxGetCurrent): returns a SV (together with
- newtListboxAddEntry)
- (newtListboxAddEntry): data is now a SV
-
-2001/01/25 dam's <damien@mandrakesoft.com>
-
- * install2.pm: disable steps 'packages choice', 'configure X', and
- 'configure' 'printer'
-
- * install_steps_interactive.pm: don't oblige user addition
-
- * network.pm: display ethernet module
-
- * netconnect.pm: network informations filled into
- $prefix/var/lib/naat/configuration
-
-2001/01/25 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh ->
- /usr/bin/sh for stage2
-
- * mdk-stage1/probing.h: better tightness of probing stuff
-
- * mdk-stage1/probing.c: better tightness of probing stuff
- print warning message when insmod of PCI-detected device fails
-
- * mdk-stage1/stage1.c:
- - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives
- - remove fat/vfat modules from some boot floppies now that we don't
- need it anymore
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of
- tulip network cards, kernel-2.4 has strange way to classify some of its
- net modules..
-
-2001/01/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: Waw, italian translator is very fast :)
- updated Indonesian and Italian fiels
-
- * share/po/id.po: updated Indonesian and Italian fiels
-
- * share/locales.tar.bz2: added iso9 locale definitions
-
- * lang.pm: fixed LANGUAGE for mk locale
-
-2001/01/25 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (spawnShell): fix error message
-
-2001/01/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1-data/stage1.tar.bz2:
- - clean up deprecated symlinks (insmod, rmmod, cardmgr)
- - remove unecessary device files
-
- * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
- mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
- mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
- mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
- mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
- mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
- mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
- mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
- mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
- mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
- mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
- mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
- * install_steps.pm (afterInstallPackages): cleanup
-
- * interactive.pm: better documentation of ask_from_entries_refH features
- (entry)
-
-2001/01/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1-data/stage1.tar.bz2:
- - clean up deprecated symlinks (insmod, rmmod, cardmgr)
- - remove unecessary device files
-
- * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
- mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
- mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
- mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
- mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
- mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
- mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
- mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
- mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
- mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
- mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
- mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
- * install_steps.pm (afterInstallPackages): cleanup
-
- * interactive.pm: better documentation of ask_from_entries_refH features
- (entry)
-
-2001/01/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file
-
-2001/01/22 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm, netconnect.pm: corrected slide bar, and
- added network conf save in /root/networking.tmp
-
-2001/01/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/network.c: add automatic support in choice of NET device, in
- case of multiple NET devices
- consistent dot-terminated error messages, consistent no-dot log messages
- re-put Netmask input per default (void entry -> automatic guess)
-
- * mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent
- dot-terminated error messages, consistent no-dot log messages
-
-2001/01/22 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/id.po: updated Indonesian file
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
- share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
- share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated po files
-
- * share/po/wa.po: updated po files
- updated pot file
-
- * install2.pm, lang.pm: fixed the places where console fonts and related
- files are put under
- /etc/sysconfig to the places really used by console-tools
-
- * share/po/DrakX.pot: updated pot file
-
- * share/po/hr.po: updated po files
- updated Croatian file
-
-2001/01/22 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way,
- read_rpmsrate
- can be called standalone.
-
- * network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm,
- install_interactive.pm, install2.pm, partition_table.pm, install_any.pm,
- any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is
- deprecated, replaced by !$::expert
-
-2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
- network/ftp installs
-
-2001/01/21 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
- * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
- network/ftp installs
-
-2001/01/21 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-2001/01/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/nfsmount.c: fix remaining perror's
-
- * mdk-stage1/stage1.c: fix remaining perror's
- - better msg in fatal errors
- - do not include code to spawn a shell for releases
-
-2001/01/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectMouse): use ask_from_treelist_
-
- * interactive.pm (ask_from_treelist_): created, split with the separator,
- call translate on
- words, then re-join.
-
-2001/01/19 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: fixes for CD not changeable.
-
- * install_steps_interactive.pm: fixed unselect group and inoperant
- individual package selection.
- removed expert mode and install class.
-
-2001/01/18 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: fixed obligation of relative large install, now
- minimum is lesser.
-
- * install_steps_gtk.pm: make sure no ratio above 1 can occur, still need
- to see why as it happens
- on install-abort-choices-install or
- install-abort-choices-fs-format(none)-choices-install
-
- * live_install: update live install to match /tmp/image instead of
- /tmp/rhimage.
-
-2001/01/17 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm, install_any.pm: fixes with /tmp/rhimage and
- /tmp/image.
-
- * pkgs.pm: update to use new header file format in hdlist (added arch) but
- depslist has not it...
-
- * install2.pm: fixes with /tmp/rhimage and /tmp/image
-
-2001/01/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/bg.po: updated bulgarian file
-
-2001/01/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/url.c: use strrchr instead of doing it by hand
-
- * mdk-stage1/insmod-busybox/busybox.h,
- mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c:
-
- - replace remaining perror's with log_perror's
- - little code cleanup
-
- * mdk-stage1/stage1-data/stage1.tar.bz2,
- mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0
-
- * mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c,
- mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c:
- - add load of third party modules in Expert mode (PS rulz)
-
-2001/01/12 siegel
-
- * share/po/de.po: updates
-
-2001/01/12 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: fixed addUser for invocation of
- any::ask_users.
- fixed bad invocation of installation of X server.
-
-2001/01/12 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/cdrom.c: add more memory carefulness with CDROM install
- - add wait_message for initializing of CDROM's (it can be long when
- it's SCSI)
- - print CDROM drive names (model) in dialogs
-
- * mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c:
- - fix behaviour with bad ISO images (DISK installs)
- - better dialogs for DISK installs
-
-2001/01/12 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: make lang list in format for tree-selector
-
-2001/01/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/disk.c: fix failing umount for DISK installs in some failing
- loopback situations
- act nicely when no partitions are found on some disk
-
- * mdk-stage1/modules.h: polish generic blank.img situation (no modules
- and/or modules.dep available)
-
- * mdk-stage1/lomount.c: fix failing umount for DISK installs in some
- failing loopback situations
- better log messages
- continue anyway when insmod'ing of modules fail (for blank.img)
-
- * mdk-stage1/probing.c: close some fd's
-
- * mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img
- situation (no modules and/or modules.dep available)
- continue anyway when insmod'ing of modules fail (for blank.img)
-
-2001/01/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/Makefile, mdk-stage1/disk.c:
- - add DISK install from ISO image file
- - add FTP
- - add HTTP
- - use single place for mountpoints and static directories
-
- * mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h:
- - add DISK install from ISO image file
-
- * mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h,
- mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
- mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c:
- - add FTP
- - add HTTP
- - use single place for mountpoints and static directories
-
- * mdk-stage1/insmod-busybox/Config.h: tweak config
-
-2001/01/11 Pixel <pixel@mandrakesoft.com>
-
- * standalone/adduserdrake: adduserdrake may handles autologin
-
- * install_steps.pm (addUser): set autologin
-
- * install2.pm (addUser): moved setAuthentication to install_steps::addUser
-
- * install_steps_interactive.pm (addUser): fix
-
-2001/01/11 dam's <damien@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm, ChangeLog,
- netconnect.pm: updated
-
-2001/01/11 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when
- mar or marfiles not available to perform consistency check
-
-2001/01/11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (configureX): call directly $o->pkg_install, no need to
- add 'XFree86-' at the beginning
- (addUser): use any::write_passwd_user
- (setRootPassword): use any::write_passwd_user
- (configureX): fix bad $install given to Xconfigurator::main
-
- * any.pm (write_passwd_user): add or update an entry in /etc/passwd
- (ask_users): created, interactively ask users to add (used in
- adduserdrake and install)
- (allocUsers, addUsers): changed the prototype
- (setupBootloader): grep out fat partitions for the "Boot device"
- propositions (people are too stupid)
-
- * my_gtk.pm (main): third argument is a function to call before leaving in
- case of
- "cancel" clicked.
-
- * interactive_gtk.pm (create_ctree): fix default value selecting failing
- (in case of "format")
- (ask_from_entries_refW): apply "format" on label when icon is missing
- for iconlist
- (ask_from_entries_refW): handle "canceled" callback. Permits to overrule
- the cancel.
-
- * install_any.pm (g_auto_install): deep copy of $o->{users} because we're
- modifying it
-
- * install_steps_interactive.pm (addUser): use any::ask_users
-
- * standalone/adduserdrake: use any::ask_users
-
- * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
- install2::main)
-
- * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
- here
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
- callback defaults
- to "sub { 0 }"
-
-2001/01/11 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
- icon is missing for iconlist
- (ask_from_entries_refW): handle "canceled" callback. Permits to overrule
- the cancel.
-
- * install_steps.pm (configureX): call directly $o->pkg_install, no need to
- add 'XFree86-' at
- the beginning
- (addUser): use any::write_passwd_user
- (setRootPassword): use any::write_passwd_user
- (configureX): fix bad $install given to Xconfigurator::main
-
- * any.pm (write_passwd_user): add or update an entry in /etc/passwd
- (ask_users): created, interactively ask users to add (used in
- adduserdrake
- and install)
- (allocUsers, addUsers): changed the prototype
- (setupBootloader): grep out fat partitions for the "Boot device"
- propositions (people are too stupid)
-
- * my_gtk.pm (main): third argument is a function to call before leaving in
- case of
- "cancel" clicked.
-
- * install_any.pm (g_auto_install): deep copy of $o->{users} because we're
- modifying it
-
- * install_steps_interactive.pm (addUser): use any::ask_users
-
- * standalone/adduserdrake: use any::ask_users
-
- * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
- install2::main)
-
- * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
- here
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
- callback defaults
- to "sub { 0 }"
-
-2001/01/11 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (autologin): moved to package any
-
- * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
- icon is missing for iconlist
- (ask_from_entries_refW): handle "canceled" callback. Permits to overrule
- the cancel.
-
- * install_steps.pm (configureX): call directly $o->pkg_install, no need to
- add 'XFree86-' at
- the beginning
- (addUser): use any::write_passwd_user
- (setRootPassword): use any::write_passwd_user
- (configureX): fix bad $install given to Xconfigurator::main
-
- * any.pm (write_passwd_user): add or update an entry in /etc/passwd
- (ask_users): created, interactively ask users to add (used in
- adduserdrake
- and install)
- (allocUsers, addUsers): changed the prototype
- (setupBootloader): grep out fat partitions for the "Boot device"
- propositions (people are too stupid)
-
- * my_gtk.pm (main): third argument is a function to call before leaving in
- case of
- "cancel" clicked.
-
- * install_any.pm (g_auto_install): deep copy of $o->{users} because we're
- modifying it
-
- * Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated)
-
- * install_steps_interactive.pm (addUser): use any::ask_users
-
- * standalone/adduserdrake: use any::ask_users
-
- * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
- install2::main)
-
- * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
- here
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
- callback defaults
- to "sub { 0 }"
-
-2001/01/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal
- size
-
- * mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c:
- remove warnings from compile
-
-2001/01/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
- callback on clist/list/ctree
-
- * install_steps.pm (addUser): use any::pack_passwd
- (setRootPassword): use any::unpack_passwd and any::pack_passwd
-
- * Xconfigurator.pm (cardConfiguration): adapt for $install which is
- generic
- (autologin): use $install which is now generic
-
- * install_steps_interactive.pm (selectLanguage): many_languages choice
- moved there as advanced
-
- * my_gtk.pm (create_packtable): yet another try to have something nice :)
- !! uses Gtk::Table::attach_raw which is available in
- perl-GTK-0.7004-6mdk !!
- (create_box_with_title): with the size given to set_usize for the scroll
- containing the text widget in case of long text. and don't let the
- scroll
- grow.
- (gtktext_insert): remove adding an ending "\n" (no more needed?)
-
- * any.pm (setAutologin): cleanup
- (pack_passwd, unpack_passwd): created
-
-2001/01/10 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm: corrected last message . firewall
-
-2001/01/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm,
- parport*, plip)
-
-2001/01/10 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
- callback on clist/list/ctree
-
- * install_steps.pm (addUser): use any::pack_passwd
- (setRootPassword): use any::unpack_passwd and any::pack_passwd
-
- * my_gtk.pm (create_packtable): yet another try to have something nice :)
- !! uses Gtk::Table::attach_raw which is available in
- perl-GTK-0.7004-6mdk !!
- (create_box_with_title): with the size given to set_usize for the scroll
- containing the text widget in case of long text. and don't let the
- scroll
- grow.
- (gtktext_insert): remove adding an ending "\n" (no more needed?)
-
- * any.pm (setAutologin): cleanup
- (pack_passwd, unpack_passwd): created
-
- * Xconfigurator.pm (cardConfiguration): adapt for $install which is
- generic
- (autologin): use $install which is now generic
-
- * install_steps_interactive.pm (selectLanguage): many_languages choice
- moved there as advanced
-
- * standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2,
- standalone/livedrake, standalone/drakboot, standalone/draksec,
- standalone/netdrake, standalone/mousedrake, standalone/drakgw,
- standalone/drakxservices, standalone.pm, standalone/draknet,
- standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
- standalone/drakxconf: use standalone and standalone::pkgs_install
-
-2001/01/09 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (drakx_version): nicer (4gc)
-
- * install2.pm (main): log::l the drakx_version
-
- * my_gtk.pm (create_packtable): no_expand option added
-
- * interactive.pm (ask_from_entries_refH_powered_normalize): field
- "disabled" added,
- "advanced_messages" added
-
- * lang.pm (langs): created (transform the $o->{langs} hash ref in a list)
- (pack_langs): use lang::langs
-
- * install_steps.pm (selectLanguage): $o->{langs} is now a ref so
- initialize as such
-
- * Makefile (get_needed_files): generate /usr/share/VERSION which contains
- the version
- of ChangeLog (which is updated at each upload)
-
- * install_steps_interactive.pm (choosePartitionsToFormat): handle "check
- for bad blocks" as advanced
- (setRootPassword): remove choosing non-md5 or non-shadow passwords.
-
- * install_any.pm (setPackages): use lang::langs instead of using
- $o->{langs} as a array ref (it is not so anymore)
- (spawnShell): print the drakx_version
-
-2001/01/08 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm: fixes
- (ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH
- (ask_from_entries_refH_powered): remove "1;" (was there for debugging)
-
- * interactive_gtk.pm: fixes
- (ask_from_treelistW): removed
- (create_ctree): created, used for ``type => treelist'' entries
-
- * my_gtk.pm: fixes
-
- * ChangeLog: New snapshot uploaded
-
-2001/01/07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated
- Czech, Norwegian and Serbian files
-
-2001/01/07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm: update code for new ask_from_entries_refH
- which doesn't handle optional ok/cancel names in arg 1.
- must be handled via ask_from_entries_refH_powered
- (selectLanguage, selectKeyboard): use ask_from_entries_refH instead of
- ask_from_listf_, it enables the use of advanced
-
- * any.pm, printerdrake.pm: update code for new ask_from_entries_refH which
- doesn't handle optional ok/cancel names in arg 1.
- must be handled via ask_from_entries_refH_powered
-
- * interactive.pm: update code for new ask_from_entries_refH which doesn't
- handle optional ok/cancel names in arg 1.
- must be handled via ask_from_entries_refH_powered
- (ask_from_listf_no_check): replaces ask_from_list_no_check
- (ask_from_entries_refH_powered): sorts the list if needed or wanted
-
- * partition_table_raw.pm (test_for_bad_drives): created
- - ugly stuff needed mainly for Western Digital IDE drives
- - try writing what we've just read, yells if it fails
- - testing on last sector of head #0 (unused in 99% cases)
-
- * ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an
- non-existent
- file, stressing the ftp server :-/ )
- for the moment, just release cdrom.img, hd.img and hdreiser.img
- others should should come...
-
- * install_steps.pm: for the moment, just release cdrom.img, hd.img and
- hdreiser.img
- others should should come...
-
- * interactive_gtk.pm (ask_from_listW): removed
- (create_list): calls "format" on list elems before prompting them
- (create_clist): created
- (ask_from_entries_refW): calls create_clist in case of list with no help
-
- * install_steps_gtk.pm (installPackages): autoflush stdout before beeping
- (installPackages): don't take into account the time when prompting the
- user
-
- * common.pm (may_apply): added
-
- * install_any.pm (getHds): test_for_bad_drives called on hard drives
- (getHds): ensure $o->{hds} is not set until the hard drives are checked
-
-2001/01/06 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
- * ChangeLog: New snapshot uploaded
- New snapshot uploaded
-
-2001/01/06 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
- * ChangeLog: New snapshot uploaded
-
-2001/01/06 Pixel <pixel@mandrakesoft.com>
-
- * keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
- * standalone/rpmdrake: deprecated (and has been for a long time now)
-
- * network.pm, install_steps_interactive.pm, netconnect.pm,
- install_interactive.pm, standalone/adduserdrake, any.pm,
- Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm:
- ask_from_entries_refH parameter format has changed so change all
- accesses to it.
-
-2001/01/05 François Pons <fpons@mandrakesoft.com>
-
- * lang.pm, keyboard.pm: forget _exit in child process after a fork of
- DrakX
- removed need of packdrake binary
-
- * Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames
-
- * live_install2: cleanup to keep libperl.so but the right one
-
- * live_install: no more copy of files on live system, now use environment
- variable by DrakX cleanup
-
- * perl2fcalls: added packdrake call (via new but incomplete) and package
-
- * install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary
-
- * netconnect.pm: fixed syntax error
-
- * modules.pm: eval insmoding ide-cd (just in case)
- removed need of packdrake binary
-
-2001/01/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan
- and Japanese files
-
-2001/01/05 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm: help cperl-mode
-
- * interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm,
- interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to
- new ask_from's:
- - ask_from_entries_ref is deprecated, use ask_from_entries_refH
- - ask_from_list now calls ask_from_entries_refH_powered
- still not done:
- - ask_from_treelist should use ask_from_entries_refH_powered,
- and lists with no help should use CList (List is bad)
- - keyboard and mouse binding is still rough
- - enhance the look
-
- * keyboard.pm: add the percentage of each keyboard types (as a comment for
- now)
-
-2001/01/04 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: cleaned... everything should be buggy.
-
-2001/01/04 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed some old $p->{file} by new $p->[$FILE]
- code cleanup and fixes for lilo not upgrade
-
-2001/01/04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * install_any.pm: fixed the functions doing the lists of languages
-
- * lang.pm: fixed the functions doing the lists of languages
- The list of languages now has complete locale names insted of just
- language
- code (that is needed to differentiate zh_CN and zh_TW among others)
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file
-
- * share/po/eu.po: updated Basque file
- updated Brazilian file
-
-2001/01/04 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: some pixelization using the new if_
-
- * install_steps_interactive.pm (setRootPassword): fix pixelization
- keep $o->{langs} unpacked to simplify things
- if_ pixelization
-
- * common.pm (%EXPORT_TAGS): add if_ in "common" exported tags
- (if_): created. Use it to replace things like
- ($::expert ? $val : ()) by if_($::expert, $val)
-
- * keyboard.pm: nl keyboard is not used, so defaults to us_intl
-
- * lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs}
- unpacked to simplify things
-
- * netconnect.pm: quite a few clean-up (and buggying)
-
-2001/01/03 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm: admin user removed before beeing added
-
- * netconnect.pm: corrected typo
- LAN is configured with default value if firewall
-
-2001/01/03 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm: fixed invocation of change_type by clicking on legend
- unless expert
-
- * install2.pm: fixed usage with testing
-
- * install_steps.pm: fixed some other services to start in case something
- gets wrong,
- this fixes some deadlock on upgrade from 7.0.
- fixed usage with testing
-
- * partition_table.pm: fixed overlapping partitions between one extended
- and one regular primary.
- should be accepted (log printed instead of error) as diskdrake allow
- their
- creation in expert.
-
-2001/01/03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: add checks of dependencies on marfiles
- fix a couple of broken dependencies in modules.pm
-
-2001/01/03 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format
-
-2001/01/03 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): move the setting of PATH and spawnShell *after*
- setting $prefix
-
-2000/12/31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/rpmsrate: added a few locales dependences
-
-2000/12/29 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (addUser): typo fix
-
- * ChangeLog: New snapshot uploaded
-
- * ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/29 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (addUser): typo fix
-
- * ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/28 Pixel <pixel@mandrakesoft.com>
-
- * Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and
- jako
-
-2000/12/26 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * keyboard.pm: Add the very ghost option REMOVE_MOD_META_L.
-
-2000/12/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated Lithuanian file
-
-2000/12/22 dam's <damien@mandrakesoft.com>
-
- * install_steps.pm, install_steps_interactive.pm: corrected admin user
- setting for firewall install.
-
-2000/12/22 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm: fixed load_multi on live.
- added back all removed module with the new great mdk-stage1 of gégé.
-
-2000/12/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * modules.pm: make them work with kernel-2.4 by disabling non existent
- modules
-
-2000/12/22 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage
-
-2000/12/21 Pixel <pixel@mandrakesoft.com>
-
- * ChangeLog: New snapshot uploaded
-
-2000/12/21 dam's <damien@mandrakesoft.com>
-
- * install2.pm: firewall : automatic class set when firewall (beginner=0)
-
- * install_steps_interactive.pm: if firewall, admin password obliged
-
- * install_steps.pm: added setAdminpassword (a little bit redundant, sorry)
-
- * any.pm: corrected module stuff.. Thanx to pixel
-
-2000/12/20 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (selectMouse): unsure the device exists
-
- * unused/christmas-karaoke.patch: handle isa cards
-
-2000/12/19 Pixel <pixel@mandrakesoft.com>
-
- * ChangeLog: New snapshot uploaded
- New snapshot uploaded
-
-2000/12/19 dam's <damien@mandrakesoft.com>
-
- * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
- standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
- standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
- standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
- standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
- standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
- standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
- standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
- standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
- standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
- standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
- * unused/christmas-karaoke.patch: Happy Christmas :)
-
- * install_any.pm: spawnShell: set DISPLAY, just in case :)
-
- * install2.pm: set PATH before doing spawnShell
-
- * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
- * ChangeLog: New snapshot uploaded
-
-2000/12/18 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: added embedded support for control-center
- corrected embedded support.
- new control center and related
-
- * netconnect.pm: corrected typo
- corrected typo
-
- * standalone/drakxservices, standalone/control-center, ChangeLog,
- standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
- standalone/drakboot: new control center and related
-
- * install_gtk.pm: added firewall support
-
- * install2.pm: included firewall handling
- changed firewall comportement
-
- * install_steps_interactive.pm: changed firewall comportement
-
- * modules.pm: corrected bad mergeinconf
-
-2000/12/18 Pixel <pixel@mandrakesoft.com>
-
- * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
- cfI/xfI
- remove isdndb.net
-
-2000/12/19 dam's <damien@mandrakesoft.com>
-
- * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
- standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
- standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
- standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
- standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
- standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
- standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
- standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
- standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
- standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
- standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
- * unused/christmas-karaoke.patch: Happy Christmas :)
-
- * install_any.pm: spawnShell: set DISPLAY, just in case :)
-
- * install2.pm: set PATH before doing spawnShell
-
- * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-2000/12/18 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm: added embedded support for control-center
- corrected embedded support.
- new control center and related
-
- * netconnect.pm: corrected typo
- corrected typo
-
- * standalone/drakxservices, standalone/control-center, ChangeLog,
- standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
- standalone/drakboot: new control center and related
-
- * install_gtk.pm: added firewall support
-
- * install2.pm: included firewall handling
- changed firewall comportement
-
- * install_steps_interactive.pm: changed firewall comportement
-
- * modules.pm: corrected bad mergeinconf
-
-2000/12/18 Pixel <pixel@mandrakesoft.com>
-
- * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
- cfI/xfI
- remove isdndb.net
-
-2000/12/16 Pixel <pixel@mandrakesoft.com>
-
- * standalone/mousedrake, standalone/drakgw: use ldetect-lst
-
- * Makefile.drakxtools: fix daminetsex
- use ldetect-lst
- pci_probing now done by libldetect
- config files moved in package ldetect-lst
-
- * share/list: use ldetect-lst
- pci_probing now done by libldetect
- config files moved in package ldetect-lst
-
- * any.pm: fix daminetsex
-
- * modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm,
- mouse.pm: use ldetect-lst for usb => now auto detects mice types :)
-
- * c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto
- detects mice types :)
- use ldetect-lst
- pci_probing now done by libldetect
- config files moved in package ldetect-lst
-
- * Makefile.config: fix daminetsex
- use ldetect-lst
-
- * Makefile: use ldetect-lst for usb => now auto detects mice types :)
- use ldetect-lst
-
- * netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm,
- Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net,
- share/Cards2CardsNames: pci_probing now done by libldetect
- config files moved in package ldetect-lst
-
-2000/12/15 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst
-
- * install_steps.pm: clean all unneeded stuff
-
-2000/12/14 dam's <damien@mandrakesoft.com>
-
- * any_new.pm, netconnect_new.pm: preparing for big jump.
-
- * netconnect.pm: Big jump. The *_new.pm are replaced by *.pm
- Everything should work, but you better test :)
-
- * standalone/control-center: big improvement and cosmetic changes
- a lot of improvement. Is able to launch multiples soft passing in
- arguments.
- new file. Its location should change soon.
-
- * any.pm: Big jump. The *_new.pm are replaced by *.pm
- Everything should work, but you better test :)
- corrected typo.
-
-2000/12/14 Pixel <pixel@mandrakesoft.com>
-
- * share/compssList: obsoleted by rpmsrate
-
- * share/rpmsrate: obsoletes compssList
-
- * share/compssUsers, install_steps.pm, install_steps_interactive.pm,
- Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm:
- move from compssList to rpmsrate
-
- * Newt/Newt.xs: cleanup (use of alloca to pass parameters)
-
-2000/12/13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/it.po: updated Italian file
-
-2000/12/12 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: typo + if firewall, don't display 'disable network'
-
- * standalone/draknet2: new version... still working on it
-
- * ChangeLog: commit
-
- * share/themes-mdk-Firewall.rc: added firewall theme
-
- * modules.pm: my fault, corrected renaud's patch incorporation
-
- * share/logo-mandrake-Firewall.xpm: new logo
-
-2000/12/12 François Pons <fpons@mandrakesoft.com>
-
- * share/list: added packdrake.pm as packdrake has been splited.
-
- * pkgs.pm: fixed versionCompare to always return number. added checking of
- version to
- select obsoletes on upgrade.
-
-2000/12/11 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: Radeon uses 3D now.
-
- * lang.pm: fixed write_langs for upgrade.
- i18n sucking fixes.
-
- * Xconfigurator.pm: Radeon uses 3D hw accel theoritically now.
-
-2000/12/09 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: Added configuration of Vietnamese input server
-
-2000/12/09 Pixel <pixel@mandrakesoft.com>
-
- * standalone/adduserdrake: remove debugging code
-
- * install2.pm (selectInstallClass): give $clicked to selectInstallClass
-
- * interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to
- null in case of error
- on hidden entry cuz newt doesn't display null entries, disturbing
-
- * install_steps_interactive.pm (formatMountPartitions): the format
- partition dialog created at first use,
- so that it doesn't appear if no partitions are formatted.
- (selectInstallClass): ensure expert choice is kept if it was prechosen
- (selectInstallClass): if expert pre-chosen, ensure expert is kept
-
- * interactive_gtk.pm, install_steps.pm: small renicing
-
-2000/12/08 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed bug in list of packages provided by another one.
-
-2000/12/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po,
- share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po,
- share/po/az.po, share/po/tr.po: updated Brazilian file
-
-2000/12/08 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): warn if VERSION file doesn't exist
- (formatPartitions): call rotate_logs after mounting the partitions
-
- * mouse.pm (write_conf): fix to make make test_pms happy
-
- * install_steps.pm (exitInstall): save the report.bug in /root/report.bug
-
- * any.pm (rotate_logs): created, rotates ddebug.log and install.log in
- /root
-
- * ftp.pm (new): retry in case of ftp connection/login
-
- * commands.pm: report_bug: created, returns a string
-
-2000/12/07 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: corrected ADSL connection choice.
- corrected typo
-
-2000/12/06 dam's <damien@mandrakesoft.com>
-
- * install2.pm: erare humanum es
- firewall begins to infect the install :).
- new meta_class.
-
- * share/logo-mandrake-Firewall.xpm: aded logo for firewall
-
- * install_gtk.pm: corrected errors
- left pixmap centered if firewall
- improved the firewall theme.
- errare humanum es
- firewall infects the install.
- The logo is changed if firewall.
-
-2000/12/06 Pixel <pixel@mandrakesoft.com>
-
- * standalone/keyboarddrake: add possibility to use keyboarddrake
- non-interactive (aka give the keyboard as
- first parameter)
-
- * lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm,
- install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted.
- Now rpm uses %_install_langs in /etc/rpm/macros
-
-2000/12/05 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: final fixes to versionCompare to make sure no deadlock can
- occurs.
-
- * Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration.
-
-2000/12/05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po,
- share/po/es.po: updated several pofiles
-
-2000/12/04 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: use isCdNotEjectable.
-
- * common.pm: added function isCdNotEjectable.
-
- * share/Cards+: SiS620 card are said to be unsupported by XF4.
-
- * pkgs.pm: load only one hdlist in memory if CD is not ejectable (low
- memory).
- fixed compareVersion for deadlock. removed silly CODE print on deporder
- problems.
-
- * Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode.
-
-2000/12/03 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: incorporated cmodifications in the firewall branch
-
- * netconnect.pm: netconnect_new > netconnect.pm
-
- * netconnect_consts.pm: incorporated in the firewall branch.
-
- * standalone/draknet2: incoporated in the firewall branch
-
- * any_new.pm: any_new > any, so we remove it now.
-
- * netconnect_new.pm: netconnect_new > netconnect, so we remove it now.
- incorporated in the firewall branch
-
- * modules.pm: incorporated modifications to the firewall branch. Hope they
- won't break anything...
-
-2000/12/02 dam's <damien@mandrakesoft.com>
-
- * share/po/az.po: correction in firewall incorporated
-
- * ChangeLog: first attempt ro build the firewall install
-
- * standalone/mousedrake: incorporated in the firewall branch
-
- * share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated
- in the firewall branch
-
-2000/11/28 dam's <damien@mandrakesoft.com>
-
- * modules.pm: included reno's patches. Now should work without kudzu.
- branch to build the firewall install.
-
- * standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm,
- standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm,
- standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm,
- standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm,
- standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm,
- standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm,
- standalone/pixmaps/isdn.xpm: Initial revision
- branch to build the firewall install.
-
- * partition_table_dos.pm, share/po/bg.po, share/po/sr.po,
- share/template.in/cdrom.kdelnk.in,
- share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c,
- Makefile, share/consolefonts/lat0-sun16,
- share/themes/DarkMarble-check_off.png,
- share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc,
- do_resize_fat, share/po/wa.po, share/po/is.po,
- share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm,
- class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm,
- install_interactive.pm, c/README, Xconfig.pm, share/themes.rc,
- share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc,
- share/themes-blueHeart.rc, pkgs.pm, keyboard.pm,
- share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po,
- standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm,
- share/step-green-click.xpm, partition_table_sun.pm,
- share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c,
- share/po/.cvsignore, share/ftin.xpm, standalone/draksec,
- resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm,
- Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm,
- share/themes/marble3d-button4.png, share/rpm-unselected.xpm,
- share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png,
- c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm,
- standalone/livedrake, share/diskdrake.rc,
- share/themes/DarkMarble-check_on.png, standalone/draknet,
- share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png,
- share/po/ro.po, share/list, share/po/cs.po, share/po/be.po,
- share/po/sp.po, share/step-orange-click.xpm, modparm.pm,
- share/step-green.xpm, share/rpm-base.xpm,
- share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po,
- share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm,
- share/Cards2CardsNames, Newt/Makefile.PL,
- share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po,
- share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po,
- standalone/icons/findf.xpm, share/po/lt.po,
- share/themes/mdk-check_off.png, fs.pm, c/.cvsignore,
- share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm,
- detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm,
- standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm,
- Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po,
- share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm,
- share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po,
- resize_fat/.cvsignore, install_steps_interactive.pm,
- share/themes/mdk-button4.png, live_install, standalone/draknet2,
- any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm,
- share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm,
- share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl,
- swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake,
- g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po,
- partition_table_mac.pm, standalone/mousedrake, devices.pm,
- share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po,
- share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm,
- share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po,
- Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc,
- share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c,
- share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm,
- perl2etags, share/po/Changelog, standalone/drakboot,
- resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc,
- share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po,
- share/MonitorsDB, share/template.in/Dos_.kdelnk.in,
- standalone/printerdrake, services.pm, share/kmap2bkmap,
- share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po,
- common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm,
- install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16,
- share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames,
- c/Makefile.PL, share/themes-mdk-Desktop.rc,
- share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm,
- share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw,
- share/po/sl.po, standalone/rpmdrake, share/makedev.sh,
- share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc,
- install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm,
- my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList,
- share/po/fr.po, share/themes/DarkMarble-button3_in.png,
- standalone/icons/ftin.xpm, share/modparm.lst, raid.pm,
- standalone/diskdrake, share/po/ko.po,
- share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop,
- share/po/ja.po, any.pm, share/isdndb.net,
- share/template.in/floppy.kdelnk.in, share/step-green-on.xpm,
- share/step-red-click.xpm, share/po/Makefile, help.pm,
- share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po,
- share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po,
- loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm,
- Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm,
- standalone/drakxservices, resize_fat/Makefile, fsedit.pm,
- interactive_stdio.pm, live_install2, resize_fat/directory.pm,
- share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot,
- share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po,
- share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm,
- share/themes/marble3d-check2.png, ftp.pm, c/md5.h,
- standalone/adduserdrake, share/themes/marble3d-button2.png,
- partition_table_raw.pm, share/template.in/zip.kdelnk.in,
- share/locales.tar.bz2, standalone/icons/fileopen.xpm,
- share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm,
- commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po,
- interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png,
- interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm,
- bootloader.pm, share/po/af.po: branch to build the firewall install.
-
-2000/11/28 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: change upgrade section for keyboard.
-
- * install_steps_gtk.pm: extended chooseSizeToInstall.
-
- * install_steps.pm: updated comment.
-
- * pkgs.pm: fixed misuse of map with values returing list which are indexed
- afterward.
-
- * install_any.pm: removed some more logs.
-
- * keyboard.pm: keep track of unknown keyboard (for upgrade)
-
- * install_steps_interactive.pm: modified def_mark to 59 (gl hw
- acceleration level) and upgrade use this level
- for newbies so.
- make sure a recommended upgrade get the minimum and a little more (80).
- choose default size according to a default mark (currently 49).
-
-2000/11/27 dam's <damien@mandrakesoft.com>
-
- * netconnect_consts.pm: added isdn Gazel card 10b5 1151
-
-2000/11/27 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (@bad_types): list of the different type of extended
- partitions
- (important_types): remove @bad_types from important_types
-
-2000/11/25 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ru.po: updated Russian file
-
-2000/11/24 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: doc + split
-
- * netconnect_new.pm: added depmod after having writed modules.conf
-
- * standalone/mousedrake: splited
-
-2000/11/24 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: avoid .la files for selection.
-
- * install_steps.pm: added missing portmap.
-
-2000/11/23 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet2: progressbar.
-
-2000/11/23 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_gtk.pm: updated with
- structural change of pkgs.
-
- * install_any.pm: removed some ugly logs.
- updated with structural change of pkgs.
-
- * install_steps.pm: added tempory fix for initscripts %post.
- updated with structural change of pkgs.
-
- * pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk.
- removed ugly log on transaction.
- added special case to avoid counting kernels space when upgrading
- as these package are not upgraded (just installed).
- Memory usage optimization, change structure of storing
- package informations. lot of fork to make sure of
- freeing memory by perl (no free on used hashes or arrays
- usable by other than perl), now upgrade takes as much as
- install which takes at least 0.5Mb less than before.
-
-2000/11/23 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: put all tina stuff to weight 0
-
-2000/11/21 François Pons <fpons@mandrakesoft.com>
-
- * Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files,
- keep
- wacom entries.
-
- * Xconfigurator.pm: upgrade for XF86Config, take care of resolution and
- depth wanted.
-
- * install_steps.pm: always try to get default from /etc/X11/XF86Config
- removing logs.
-
- * pkgs.pm: cosmetic changes for upgrade, removing some logs.
-
- * install_steps_interactive.pm: removed code to ask if take care of
- /etc/X11/XF86Config* files.
- added wait message during rebuild of rpm database as it takes some time.
-
- * Xconfigurator_new.pm: WARNING
-
-2000/11/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: updated Azeri file
-
-2000/11/20 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: clean up as today filelist is no more.
- use parsehdlist from rpmtools-2.1-3mdk or above instead of
- perl code from DrakX forking to simulate a filelist server.
- this increase performance by 100 to 150% on selection of
- packages to upgrade.
-
- * share/list: added parsehdlist.
-
- * c/stuff.xs.pm: removed logs.
-
-2000/11/20 Pixel <pixel@mandrakesoft.com>
-
- * share/Cards+: add radeon
-
- * install_steps_auto_install.pm (exitInstall): fix message
-
- * install_steps.pm (afterInstallPackages): moved the
- writeandclean_ldsoconf here
-
- * fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points
-
-2000/11/17 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * install_any.pm: add openuniverse to the list of gl apps
-
-2000/11/16 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: corrected isdn_get_{list, info}
-
-2000/11/16 François Pons <fpons@mandrakesoft.com>
-
- * share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-)
-
- * modules.pm: tempory version for current glibc, a lot of module have been
- removed due to
- problem of stage1 increase in size when compiled with glibc-2.2 and
- current
- modutils.
-
- * c/Makefile.PL: updated with rpmlib 4.
-
- * c/stuff.xs.pm: completed something that seems to work almost correctly
- at the first look
- with rpmlib 4.
-
-2000/11/16 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: add netscape-german, thx to florin
- isdn4k-utils gets same weight as isdn4net, thx to Florin
-
-2000/11/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po: updated Norwegian file
-
- * share/po/sk.po: updated Slovak file
-
-2000/11/15 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: added isdn_get_list and isdn_get_info
- calls modules::write_conf to fill the modules.conf.
-
- * Xconfigurator_new.pm: added to fork frontends backends. Not operationnal
- at all for now.
-
- * modules.pm: when loading a new module, add an alias for it, even in
- standalone mode.
-
-2000/11/15 François Pons <fpons@mandrakesoft.com>
-
- * c/stuff.xs.pm: updated for rpm 4.
-
- * pkgs.pm: rpmdepOrder again (for new TAGp)
-
-2000/11/15 Pixel <pixel@mandrakesoft.com>
-
- * c/Makefile.PL: add librpmio
-
- * c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc
- (dev_t)
-
-2000/11/14 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: better structure for the ethx-driver.
- added call to add_alias and write_conf
-
- * standalone/draknet2: updated
-
-2000/11/14 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: removed foreach (<... which are eating memory
- fork install on upgrade for searching trhough filelist, this saves
- about 20Mb of memory before rpmlib transaction are started so its is
- more than 2 times faster for upgrading a system, sorry it was
- effectively
- a machine two overloaded that makes the upgrade slower.
- make rpmlib not to check size as DrakX should do it.
- added special cases for selection of packages according to files, avoid
- all kde-i18n packages if their locales-$lang is not selected, avoid
- a -devel package if only one files is updated (typical for fixes on
- package by moving files around).
-
- deactivated rpmdepOrder as it should be done directly in
- depslist.ordered
- file.
-
- fixed obsoletes which never run correctly, even if almost no package are
- selected explicitely this way.
-
- added log during selection of packages to upgrade to keep a track of
- what DrakX is doing.
-
- * modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm,
- Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm,
- printer.pm, Xconfigurator.pm: removed foreach (<... which are eating
- memory
-
-2000/11/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/da.po: updated Danish file
-
-2000/11/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: Integrate Till's patches for better work with Cups.
-
-2000/11/12 Pixel <pixel@mandrakesoft.com>
-
- * standalone/mousedrake: fix for bug #1350
- (mousedrake dies with: Undefined subroutine &mouse::serial_ports_names)
-
- * pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and
- .cz22 for
- .cz2) that makes for than one CD install breaks :-(
-
-2000/11/11 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
- share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
- share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
- share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
- share/po/pl.po, share/po/fi.po, share/po/no.po,
- share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
- share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
- share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
-2000/11/10 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet2: draknet2 : new version of draknet, post-install
- only, uses only libDrakX backend, beautyfull
-
- * netconnect_new.pm: completed adsl_conf_backend
- corrected conf_network_card_backend : return interface and module
- separately
- splitted pppconfig.
-
-2000/11/10 François Pons <fpons@mandrakesoft.com>
-
- * share/po/fr.po: typo fixing
-
- * printerdrake.pm: fixed wrong case for managing IP for remove CUPS server
- updated typo for remote CUPS server configuration dialog
-
-2000/11/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files
-
- * share/po/wa.po, share/po/da.po: updated Danish and Walloon files
-
-2000/11/10 Pixel <pixel@mandrakesoft.com>
-
- * c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent
- section)
-
-2000/11/09 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: added handling for 2 ethernet cards with the same module
-
-2000/11/09 François Pons <fpons@mandrakesoft.com>
-
- * share/po/fr.po: add some missing translation (mainly printer for CUPS
- remote config)
-
- * printer.pm: make sure to restart cups when cupsd.conf is modified.
-
- * printerdrake.pm: fixed modification of BrowsePoll on a existing file.
-
-2000/11/08 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: updated
-
-2000/11/08 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: make sure class discarding do not destroy result
-
- * pkgs.pm: added new function for selected or installed accessor on pkg
- make sure package already installed for oem are marked as selected, as
- some
- code refer to this state to perform some actions (install_urpmi)
-
- * install_steps.pm: fixed for urpmi again;
-
- * printerdrake.pm: add management of BrowsePoll <ip>:<port> in
- /etc/cups/cupsd.conf
-
- * printer.pm: add minimal management of /etc/cups/cupsd.conf
-
-2000/11/08 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136)
-
-2000/11/08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/es.po: updated Spanish file
-
-2000/11/07 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: now there are 8 ttyS* available for configuration. Used for
- internal modem configuration that uses ttyS* > 3
-
- * netconnect_new.pm: ttyS0 -> ttyS7 available for configuration
- some doc
-
-2000/11/07 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128).
-
- * install_steps_interactive.pm: use of install_any::boot_medium to avoid
- listing medium used for boot
-
- * install_any.pm: use of $boot_medium where the boot medium is used
- (default 1)
-
-2000/11/07 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to
- <sileryti@mail.com>
-
-2000/11/07 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): in oem, configureX automatic
- (main): $::oem is now global :-( (needed in install_steps.pm)
-
- * install_steps.pm (afterInstallPackages): give medium 'cdrom' to
- install_urpmi in case of $::oem
-
-2000/11/06 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: backend/frontend fork complete
-
- * any_new.pm: load_thiskind changed to load_thiskind_backend, the wait
- function is passed by argument
-
- * network.pm: configureNetwork2 commented.
-
-2000/11/06 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: created function for examining already installed package on
- install (oem).
-
- * install2.pm: add a flag to allow by default formating /
-
- * install_steps.pm: conditionnal format of / and use already installed
- packages if any on install.
-
-2000/11/06 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius
- <ajulius@yahoo.com>
-
-2000/11/06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file
- GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to
- ascii transliteration for them
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
- share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
- share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
- share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
- share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
- share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
- share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
- share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
- share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
- share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
- share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
- share/po/af.po: updated pot file
-
- * keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds
-
-2000/11/06 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (formatPartitions): formatMountPartitions done even in
- upgrade
- (main): set $o->{partitioning}{use_existing_root} in oem
-
- * install_steps.pm (doPartitionDisksAfter): remove the mount_all which is
- plain dumb
- (doPartitionDisksAfter): fs::mount_all moved here
- (doPartitionDisks): use $o->{partitioning}{use_existing_root}
-
- * install_any.pm (use_root_part): fs::mount_all really removed
- (use_root_part): fs::mount_all removed
-
- * install_steps_interactive.pm (choosePartitionsToFormat): don't propose
- already mounted partitions
- (installCrypto): nicer layout
-
-2000/11/05 dam's <damien@mandrakesoft.com>
-
- * mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse'
-
-2000/11/05 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette
- <yves@maniette.com>
-
-2000/11/01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/eo.po: updated Esperanto file
-
-2000/10/31 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: continuing forking frontend - backend. adsl ist
- nearly finished
-
- * any_new.pm: added this file to fork frontends and backends in any.pm
-
-2000/10/30 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux
- tu damsera
-
-2000/10/30 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/wa.po: updated Walloon file
-
- * share/keyboards.tar.bz2: updated keyboards
-
-2000/10/30 Pixel <pixel@mandrakesoft.com>
-
- * lang.pm (load_po): backslash @ in po strings, otherwise the eval fails
-
-2000/10/28 dam's <damien@mandrakesoft.com>
-
- * netconnect_new.pm: new version of draknet. Splited frontends - backends
-
-2000/10/28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/tr.po: updated Turkish file
-
-2000/10/27 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: remove the noising rpm output command line when loging
- installed rpm
- size (only usefull for live_update and just for conveniance).
-
- * pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP
- hack)
- before reading a compssUsers file.
-
- * live_install: add VERSION in list of file that have to be symlinked.
-
- * common.pm: list_skels returns list of existing directory and writeable.
-
- * live_install2: Make sure to remove font path in /tmp/drakx before
- exiting.
-
-2000/10/26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and
- Turkish files
-
-2000/10/24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: fortune-mod gets 10/0/10 on request from egil
-
-2000/10/24 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/pl.po: updated Polish file
-
-2000/10/23 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/ca.po: updated Catalan file
-
-2000/10/23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns
- to please jl :)
-
- * detect_devices.pm (floppies, probeall): add require "modules" as it
- should be
-
- * install_interactive.pm (partitionWizardSolutions): add "require
- resize_fat::main" as it should be
-
-2000/10/22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has
- 74/0/74
-
-2000/10/21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish
- and Ukrainian files
-
-2000/10/20 fabman
-
- * share/po/es.po: updated
-
-2000/10/20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: ntp to -1/-1/-1
-
-2000/10/19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: put all packages requiring kde1-compat to 0 except
- kisdn-free
- aumix now gets a high weight (79) because it's required to save the
- mixer
- settings at shutdown
-
-2000/10/19 Pixel <pixel@mandrakesoft.com>
-
- * share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212)
-
-2000/10/19 tlb
-
- * share/po/da.po: 100%, Troels Liebe Bentsen.
-
-2000/10/18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/az.po: Added AZeri file
-
- * share/po/no.po: updated Norwegian file
-
-2000/10/17 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused
- code in ineractive_gtk
- added some isdn card in pcitable
- corrected typos, and made ISA isdn work
-
-2000/10/17 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/lv.po: updated Latvian file
-
-2000/10/16 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
- share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
- share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
- share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
- share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
- share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
- share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
- share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
- share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
- share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
- share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
- share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
- * standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace
- setting
-
-2000/10/16 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (cdroms): fix the setting of scdX for ide burners
-
- * share/compssList: sympa is -1 except for server
-
- * keyboard.pm (write): small pixelization (neater now)
-
- * install_steps.pm (installPackages): don't run ldconfig in g_auto_install
-
-2000/10/15 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/nl.po: updated Dutch file
-
-2000/10/14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm, keyboard.pm: small fix for Swedish locale
-
- * share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po,
- share/po/wa.po, share/po/de.po: updated Bulgarian file
-
-2000/10/13 François Pons <fpons@mandrakesoft.com>
-
- * partition_table_empty.pm: empty partition table as assumed only if the
- MBR is really composed of only null chars.
-
-2000/10/13 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: added viavoicemenu
-
-2000/10/12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (ask_mntpoint_s): dqs
-
-2000/10/11 Pixel <pixel@mandrakesoft.com>
-
- * .cvsignore: ignore flog files
-
- * install2.pm (main): test
-
- * ChangeLog: qsdqsd
-
- * install_steps_interactive.pm: * (selectKeyboard): set default
- $o->{langs} to $o->{lang}
-
-2000/10/10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw, ChangeLog: make only one call to urpmi in order to
- install all the needed rpm's
-
-2000/10/10 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/po/no.po, share/po/es.po: updated Norwegian file
-
- * share/po/pl.po: updated Polish file
-
- * share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file
-
-2000/10/10 tlb
-
- * share/po/da.po: 99%.
-
-2000-10-10 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: make only one call to urpmi in order
- to install all the needed rpm's
-
-2000-10-10 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-10 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm: increase $::VERSION
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: update after Dam's new messages in netconnect
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (kdeicons_postinstall): remove the handling of
- doc desktop icons. see dadou
-
-2000-10-09 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssUsers: new list (with icons)
-
- * share/list: add icons for compssUsers
-
-2000-10-09 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: added wait message
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Pixel <pixel@mandrakesoft.com>
-
- * share/themes-*.rc: change the fg[INSENSITIVE] entry
-
-2000-10-09 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: added tuxracer in OpenGL games to install if an
- accelerated card has been found.
-
-2000-10-09 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (main): asking connection after writing start/stop scripts.
- (adsl_conf): if during install, don't use chkconfig, make the
- links directly for the adsl init script.
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): UserView in kdmrc is
- now true by default. So put false if security >= 3 instead of
- removing it.
-
-2000-10-09 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: default speed of modem set to 115200.
-
- * fs.pm: fixed format of RAID partition.
-
- * install_interactive.pm: take into account RAID partitions for
- searching / partition.
-
-2000-10-09 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-09 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (selectKeyboard): don't assume $o->{langs} is set
- (selectLanguage): don't set $o->{langs} (so that you can go back
- and it works)
-
- * common.pm (round_up, round_down): ensure number is an integer
-
- * install_steps_interactive.pm (chooseGroups): take into account
- the min_level to compute the size
-
-2000-10-08 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): move the
- computing of max_size before calling chooseGroups (not the one for
- desktop meta_class)
- (chooseGroups): compute the size of Miscellaneous
-
-2000-10-07 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-07 Pixel <pixel@mandrakesoft.com>
-
- * share/compssList: don't install locales-* even in 'all' install
- (those files are usefull if RPM_INSTALL_LANG doesn't include that
- lang)
-
-2000-10-07 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-07 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (install): log the gonna be installed packages (-> be
- able to track not installed packages that should have been
- installed)
-
-2000-10-06 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-06 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf
- (intro): connection detection improved : now use "ifconfig | grep interface"
- (pppConfig): corrected cnx_up/down
-
-2000-10-06 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-06 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): don't fail if
- kdeglobals file is not there
-
- * share/compssUsers.desktop: fix icons
-
- * detect_devices.pm (cdroms): fix for scsi cdrom drives
-
- * pci_probing/pcitable: put cs46xx instead of snd-card-cs461x
- (dixit jeff)
-
- * diskdrake.pm (Resize): comment ext2&reiserfs resizing for the
- moment
-
-2000-10-06 Frederic Lepied <flepied@mandrakesoft.com>
-
- * Xconfigurator.pm (write_XF86Config): added mode of wacom devices
-
-2000-10-06 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (ask_connect_now): connection is now tested.
-
-2000-10-06 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps_gtk.pm: updated
- license.
-
- * Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by
- DRI, use only Mesa with Utah GLX, fixed autologin for avoiding
- drakres and no wm available, moved Riva128 card from experimental
- to stable, fixed presentations of text.
-
- * pci_probing/pcitable: fixed Cirrus Logic sound card.
-
-2000-10-06 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-06 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: fixed bad call to hasUsb...
-
- * share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep
- 530, 620 and 6326 with XFree 4.0.1.
-
-2000-10-06 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-06 Pixel <pixel@mandrakesoft.com>
-
- * share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore
-
- * install_steps.pm (afterInstallPackages): put the Charset in
- kdeglobals, otherwise kde uses charset iso8859-1 :(
-
- * lang.pm (charset): created
-
- * common.pm (update_userkderc): fix it, change the argument
- passing
-
-2000-10-05 Pixel <pixel@mandrakesoft.com>
-
- * share/compssList: raise kde-i18n-*, should be installed whenever
- kdebase is installed
-
- * pci_probing/pcitable: integrate patch from viet (concerns
- sym53c8xx cards)
-
- * share/compssUsers: use "documentation" as the database icon
-
- * install_steps_interactive.pm (chooseGroups): fix to accept icons
- not in the format "*_section.xpm"
-
- * install2.pm (miscellaneous): put yes/no in sysconfig/usb entries
-
-2000-10-05 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (adsl_conf): updated pppoe conf.
- (main): added $netc->{minus_one} to avoid to count dhcp configured
- eth when asking to share the connection.
- (adsl-pppoe): improvement. Should work now.
- (miscellaneous): corrected chmod 755 to 744 for connections scripts
-
- * netconnect.pm (main): network is stopped then started, instead
- of restarted.
-
-2000-10-05 François Pons <fpons@mandrakesoft.com>
-
- * live_install: added icons (this fixes the yellow on white
- tooltips problem).
-
- * install_any.pm: added ghostscript-utils in the list of packages
- to copy when changing CD.
-
- * printerdrake.pm: install ghostscript-utils if a lexmark printer
- is selected on cups.
-
-2000-10-05 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-05 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (loadO): look for auto_inst.cfg in /, not in
- /Mandrake/base
-
-2000-10-05 François Pons <fpons@mandrakesoft.com>
-
- * netconnect.pm: fixed syntax error.
-
- * share/po/i18n_compssUsers: simplified version and fixed
- dependancies to pkgs.pm (for building drakxtools).
-
-2000-10-04 François Pons <fpons@mandrakesoft.com>
-
- * install_gtk.pm: removed 80 pixel on height for live upgrade.
-
- * install_steps.pm: do not set keyboard when live upgrade after
- setting the language.
-
- * install_steps_gtk.pm: fixed the trying to start a X server on
- live.
-
-2000-10-04 Pixel <pixel@mandrakesoft.com>
-
- * share/po/i18n_compssUsers: fake module ``c'' so that no need to
- build DrakX to use i18n_compssUsers
-
- * install_steps_interactive.pm (selectLanguage): update license
-
- * install_steps_gtk.pm (installPackages): add second license for
- shitty soft (commercial one)
-
-2000-10-04 dam's <damien@mandrakesoft.com>
-
- * draknet (netconnect.pm and network.pm): various translations
- corrected, network is restarted, buttons connect/disconnect
- debugged.
-
-2000-10-04 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-04 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (main): kill prefdm instead of autologin
-
- * install_any.pm (find_root_parts): don't use
- suggest_mount_points, it couldn't do what we wanted
- (guess_mount_point): created, contains the common stuff between
- suggest_mount_points and find_root_parts
-
-2000-10-04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: fix some failing/untranslated i18n messages
-
- * share/po/fr.po: write translations according to drakgw
-
-2000-10-04 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: removed bad card for 3D Rage Pro.
-
- * install_any.pm: removed Aurora for SiS card, add more case for
- detecting right cdrom for live upgrade, fixed wrong list of
- packages for laptops.
-
- * c/stuff.xs.pm: added time interval of 200ms between update of
- progression bar of install, make sure the last step is seen.
-
-2000-10-04 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (when_load): stricter regexp for $type is scsi or not
- (so that scsi_mod with is scsi_raw doesn't get an alias
- scsi_hostadapter)
-
- * detect_devices.pm (isLS120Drive): extend the regexp to include
- "Caleb Technology - 144MB FDD UHD Floppy"
-
- * detect_devices.pm (burners, IDEburners): reworked, renamed, now
- works!
- * c/stuff.xs.pm (isBurner): created
-
- * modules.pm (load_ide): make sure ide-cd is loaded!
-
- * install_steps_interactive.pm (chooseGroups): the label and help
- are now translated (at least will be), so use the translations
-
-2000-10-03 Pixel <pixel@mandrakesoft.com>
-
- * share/po/Makefile (DrakX.pot): added the to-be-translated from
- compssUsers
- * share/po/i18n_compssUsers: read the compssUsers's and output the
- to-be-translated in po format
-
- * log.pm (l): log to STDERR instead of STDOUT
-
- * install_any.pm (loadO): use first floppy drive available (won't
- help much though, as stage1 doesn't follow this...)
-
-2000-10-03 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-03 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (autologin): don't propose autologin in
- security > 3
-
- * common.pm (availableRamMB): HACK HACK if i810 and memsize,
- returns 127
-
- * bootloader.pm (suggest): don't use grub if more than 800MB
-
-2000-10-04 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/validate.pl: create this tool
-
- * share/po/fr.po: fix many typos
-
- * share/po/fr.po: make compssUsers translation
-
-2000-10-03 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator_consts.pm: changed resolution allocation.
-
- * fs.pm: removed no more used log.
-
- * install2.pm: add exit button if live upgrade.
-
- * install_any.pm: increased minimal available size to 65Mb.
-
- * install_steps.pm, standalone/printerdrake: fixed cups to CUPS
- for mode.
-
- * printerdrake.pm: fixed not_edit for lpr mode of printerdrake.
-
- * share/Cards+: fixed Savage2000 entry.
-
-2000-10-03 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-03 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: updated bad card with Rage Mobility card.
-
- * live_install: added test of root user, abort if not root.
-
-2000-10-03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/po/fr.po: fixed bug #518 and fixed other misc errors
-
-2000-10-03 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-10-02 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm (Resize): fix to make ext2resizing work a little
- better
-
- * install_steps.pm: fixed installation of urpmi configuration.
-
- * detect_devices.pm: updated comment about UltraDMA66/100
- management.
-
- * modules.pm: updated comment about UltraDMA66/100 management.
-
- * diskdrake.pm: adding a cylinder for the minimum of the resize
- and if there is nothing to do for resize, simply return.
-
- * install_any.pm: added missing require pkgs.
-
-2000-10-02 Pixel <pixel@mandrakesoft.com>
-
- * many files: remove many lnx4win special cases which are not
- needed anymore
-
- * any.pm (addUsers): grpuser output goes to Mr Dave
-
- * bootloader.pm (install_lilo): change the default color of menu
-
- * install_steps_interactive.pm (choosePackages): add 300MB choice
- in desktop
-
- * mouse.pm (fullnames): fix i18n fix
-
- * install_steps.pm (miscellaneous): don't add ide2=0x... for
- ultra66 (otherwise chmouel is not happy, so is hdc being hde)
-
- * Xconfigurator.pm (main): add handling of icewm logout
-
- * c/stuff.xs.pm: changed the stepping of "Progressing installing package"
-
-2000-10-02 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (main): infos are written only when needed.
- * netconnect.pm (intro): connection checking now works.
-
-2000-10-02 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like
- jeff request.
-
-2000-09-30 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-30 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm: a LOT of bugs fixed. draknet is now completely
- brok^H^H^H^Hfrozen.
-
-2000-09-29 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-29 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (adsl_conf): dhcp should better work.
-
- * network.pm (configureNetwork): remove connection script if a
- gateway is given.
-
- * common.pm (setVarsInShMode): created. chmod the file with
- permissions passed in argument.
-
-2000-09-29 François Pons <fpons@mandrakesoft.com>
-
- * modules.pm (load): fixed when standalone, use modprobe.
-
- * pkgs.pm: added preference for wu-ftpd.
-
- * detect_devices.pm: added code to proble USB printer.
-
- * printer.pm: fixed missing PRINTER=yes on CUPS configuration for
- USB printer.
-
- * install_steps.pm: removed possibilty to add an user in urpmi
- group (jloup).
-
- * install_steps_interactive.pm: log if CD not ejectable.
-
-2000-09-29 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: sync with latest packages
-
- * install_steps_interactive.pm (selectLanguage($)): s/42/43/ in
- MandrakeSoft physical address
-
-2000-09-29 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-29 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (intro): detection of internet
- configuration/connexion state.
-
- * network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf
-
-2000-09-28 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (load_thiskind): add read_already_loaded cuz of
- pcmcia
-
-2000-09-28 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: add nasty DrakSync and DrakProfile with 50 0 50
-
-2000-09-28 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): the minimum is 25
- in beginner, not 10
-
- * pkgs.pm (readCompssUsers): fix reading description
-
- * install_steps.pm (afterInstallPackages): remove the code to
- handle RPM-GPG-KEYS
-
-2000-09-28 dam's <damien@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_list_with_helpW): no more theme
- parsing, no more draknet.rc
-
- * netconnect.pm (read_net_conf): no adsl tree anymore.
-
- * netconnect.pm: drakgw called if enough card are installed.
-
- * netconnect.pm: minor bugs correction.
-
-2000-09-28 François Pons <fpons@mandrakesoft.com>
-
- * Makefile.config: added livedrake for drakxtools.
- * diskdrake.pm: use corrected partition size when resizing a dos
- partition (like the others).
- * install_any.pm: no more pnm2ppa packages and others in package
- to copy when changing CD.
- * live_install: exec live_install2 instead.
- * live_install2: contains post live upgrade stuff now.
- * printerdrake.pm: protect set_help() usage by if $::isInstall,
- removed reference to package pnm2ppa and others.
- * standalone/livedrake: initial release for drakxtools.
-
-2000-09-28 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-28 Pixel <pixel@mandrakesoft.com>
-
- * install_interactive.pm (partitionWizardSolutions): fix the limit
- cases for lnx4win
-
- * share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation
-
-2000-09-27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): set $size2install
- to $availableC in desktop install, as it should be
-
- * install2.pm (choosePackages): remove the code for removing kdesu
- in high security...
-
- * install_steps_interactive.pm (createBootdisk): format more
- nicely the text
-
- * install_steps_gtk.pm (installPackages): add 10 seconds to have a
- better estimation
-
- * install_steps_interactive.pm (chooseGroups): now returns a boolean
- (choosePackages): use chooseGroups return value to redo
- choosePackages
-
- * install_steps_gtk.pm (selectMouse): if mouse type is none, then
- don't test!
-
- * Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom
-
- * various: replace all Rescue by Update
-
- * pkgs.pm (readCompssUsers): read description for groups
-
- * install_steps_interactive.pm (chooseGroups): add description for
- groups
-
-2000-09-27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssUsers.desktop: added description
-
- * share/compssUsers: added description
-
- * share/compssUsers.desktop: added icon support, reordered,
- renamed
-
- * share/compssUsers: reordered, renamed
-
-2000-09-27 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectLanguage): intregrate
- license again
-
- * pkgs.pm (readCompssUsers): reads compssUsers.meta_class
-
- * diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/''
- (as should be)
-
- * install_steps_gtk.pm (selectInstallClass1): if @$l (list of
- install classes) contains only one element, call
- install_steps_interactive::selectInstallClass1
-
- * install_steps_interactive.pm (choosePartitionsToFormat): fix for
- "no partitions selected to format"
-
- * my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie
-
-2000-09-27 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * share/compssList: more for gnupg, -11 for sucking things,
- changed compss-groups to be less than 70.
-
- * share/compssUsers: modified compssUsers with Warly, added
- compssUsers.desktop, simplified for KD (now uses Graphical
- Desktop/KDE instead of listing all relevant packages)
-
-2000-09-27 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (get_info_adsl_providers, read_adsl_providers):
- Created. adsl provider tree.
- (set_net_conf): better informations storing.
-
- * my_gtk.pm (new): windows are always centered if standalone.
-
-2000-09-27 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed
- 3D hw acceleration for i815 (VideoRam). prefer XF3 for all
- NeoMagic cards.
- * install_gtk.pm: re-enabled themes on live upgrade but without
- modifying background image.
- * install_steps_gtk.pm: fixed missing help.
- * live_install: lot of fixes to enable DrakX font, keep upgraded
- system clean (libperl.so which allows graphical login).
- * pkgs.pm: added function allowedToUpgrade to filter kernel
- package.
-
-2000-09-27 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (configureX): if `clicked' don't go
- to auto mode
-
- * Xconfigurator.pm (monitorConfiguration): fix the translated
- 'Generic' which is not so (and must not be so) anymore
-
-2000-09-26 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm: remove all Unskip code
-
- * my_gtk.pm (_create_window): add shortcut alt-e to switch to
- expert
-
- * Xconfigurator.pm (resolutionsConfiguration): fix for setting
- legal resolution
-
- * install_steps_interactive.pm (selectLanguage): use formatAlaTeX
- on the license
-
-2000-09-26 François Pons <fpons@mandrakesoft.com>
-
- * fs.pm: added mounting of swap partition when mounting them
- all (this can help :-)
- * pkgs.pm: fixed correction size code to make (really) a true
- bijection between corrected and rpm size.
-
-2000-09-26 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectLanguage): integrate the
- license (temporary one)
-
- * modules.pm (write_conf): fix the /etc/modules generation
-
- * interactive_gtk.pm (ask_many_from_listW): if more than 5 entries
- in icon format, use scrollbar. In non-icon format, use scrollbar
- for more than 11 entries.
-
- * commands.pm (bug): add ddcxinfos
-
- * pci_probing/pcitable: replace tulip by de4x5 for 2104x cards
-
-2000-09-26 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added more 3D Rage Pro card for 3D
- acceleration with Utah-GLX (Rage Mobility, Rage XC/XL),
- modified identification for checking acceleration.
- * install_any.pm: added automatic installation (up 60) for
- OpenGL games if a graphic card MAY BE accelerated.
- * live_install: fixed perl idioms in pure shell script and added
- packdrake symlink if not already installed.
- * share/compssList: changed level to -1 for all needing 3D hw
- acceleration packages.
-
-2000-09-26 dam's <damien@mandrakesoft.com>
-
- * network.pm (write_resolv_conf): write temp dns line to be used
- with new initscripts package. Use to set dns live.
-
-2000-09-26 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-26 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (read): catch exception if fullname2mouse fails (eg:
- old FULLNAME format)
-
-2000-09-25 Pixel <pixel@mandrakesoft.com>
-
- * share/MonitorsDB: merge with latest redhat MonitorsDB
-
- * pci_probing/pcitable: major merge with latest redhat pcitable
-
- * share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to
- "Rage 128", added "Rage 128 Mobility"
-
- * install_any.pm (getAvailableSpace): keep 10% of free space on
- big partitions
-
- * Xconfigurator.pm (readMonitorsDB): don't translate Generic
- (otherwise, only a part is translated, see MonitorsDB for the
- non-translated part)
-
- * interactive.pm (ask_many_from_list): fix sorting
-
- * install_gtk.pm (test_mouse): smaller box to fit in 640x480
-
- * install_steps.pm (afterInstallPackages, beforeInstallPackages):
- RPM-GPG-KEYS is copied before installing packages
-
- * pkgs.pm (readCompssUsers): handle icons in compssUsers
-
- * common.pm (truncate_list): ensure the list is not too big
-
- * install_steps_gtk.pm (choosePackagesTree): restrict the list to
- 20 elements if it is too big (use truncate_list)
-
-2000-09-25 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: add Video mode for entry.
- * fs.pm: updated for live upgrade.
- * install2.pm: dropped unuseful steps filtering.
- * install_any.pm: fixed wrong Device3Dfx package name and clean
- postinstall rpms directory on upgrade before filling it.
- * install_gtk.pm: removed window restrictions of live upgrade.
- * install_steps.pm: fixed initrd symlink following in case of
- upgrade.
- * install_steps_gtk.pm, install_steps_interactive.pm: keep always
- upgrade on live upgrade.
- * modules.pm: may fixed pcmcia lost driver (typically on network).
- * pkgs.pm: fixed (uggly?) usage of floating perl data on perl
- script :-)
- * printer.pm: back to "Generic PostScript" for default printer (jloup).
- * printerdrake.pm: make sure an expert can choose among available
- devices.
-
-2000-09-25 dam's <damien@mandrakesoft.com>
-
- * network.pm (write_resolv_conf): write '# ppp temp entry adsl' in
- /etc/resolv.conf if needed.
-
- * netconnect.pm : adsl connection does'nt need any dns anymore.
-
- * netconnect.pm (read_net_conf): created. draknet now stores and
- reload the config.
-
- * netconnect.pm (main): if the user is french and uses french
- keyboard, don't ask his country.
-
-2000-09-25 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: added 8139too
-
- * share/Cards+: GeForce2 DDR is handled by driver "nv"
-
- * Xconfigurator.pm (main): in killall X for Xdrakres, also killall
- kdm/xdm/gdm/autologin :)
-
-2000-09-25 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-25 dam's <damien@mandrakesoft.com>
-
- * network.pm (configureNetwork): Warn user if he already
- configured the interface.
-
-2000-09-24 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (mergein_conf): created. call read_conf, fills
- %modules::conf and set $modules::scsi
-
-2000-09-24 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit
-
-2000-09-24 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-24 Pixel <pixel@mandrakesoft.com>
-
- * commands.pm (bug): use first floppy drive instead of fd0 hard
- coded (nice for LS120's)
-
- * install_steps_gtk.pm (selectMouse): if device changed, do the
- test
- * standalone/mousedrake: fix for serial mice
- * install_steps_interactive.pm (selectMouse): fix for serial mice
-
-2000-09-23 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (conf_network_card): now displays the modules of
- detected ethernet cards.
-
-2000-09-22 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (main): calls drakegw.
- * netconnect.pm (get_net_device): fixed
-
-2000-09-22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw:
- - added logs
- - added verbose mode
- - fixed wrong stopping of named in other languages than english
-
- * netconnect.pm (get_net_device): try to fix it..
-
-2000-09-22 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectKeyboard,
- choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list
- ():
-
- * interactive.pm (ask_many_from_list): now only ask_many_from_list
- exists, obsoleting ask_many_from_list_ref and
- ask_many_from_list_with_help. More flexible and nicer
- * interactive_newt.pm (ask_many_from_listW): adapted to new
- calling type
- * interactive_gtk.pm (ask_many_from_listW): adapted to new calling
- type, handle 'shadow' and 'icon2f'
-
-2000-09-22 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win}
-
- * Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for
- i810
- (testFinalConfig): i810 is a verybad_card, aka can't test anything
- on it :-(
- (main): fork to background and stay there while waiting for the WM
- to exit
- (testFinalConfig): update the backgroung image path
-
- * interactive_gtk.pm (exit): flush X before leaving (otherwise the
- mousecursor is not restored)
-
- * run_program.pm (rooted): don't redirect the stdout and stderr to
- ddebug.log if not $::isInstall
-
- * log.pm (l): log on stdout/stderr if !isInstall and !isStandalone
-
- * modules.pm (load_raw): redirect stderr to tty5
-
- * install2.pm (main): set variable $::isInstall
-
-2000-09-22 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-22 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/drakgw: now includes information from netconnect to
- ignore the interface used for Internet connection
-
-2000-09-22 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm (selectInstallClass1): pixel's typo.
-
- * netconnect.pm (get_net_device): added get_net_device to know
- which interface has been used to configure the internet connection.
- (conf_network_card): ask to restart network if dhcp too.
- (main): enable dialing when modem.
-
- * network.pm (configureNetworkIntf): changed label to warn people
- about already configured eth cards.
-
-2000-09-22 François Pons <fpons@mandrakesoft.com>
-
- * install_gtk.pm: added Desktop themes.
- * share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png:
- initial release.
- * install2.pm: moved back to all steps for live upgrade.
- * install_gtk.pm: select right logo if desktop.
- * install_steps_interactive, install_steps_gtk.pm: avoid asking if
- upgrade for a live upgrade.
-
-2000-09-22 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm: add some call to log_sizes to log the
- installed size
-
- * install_steps_gtk.pm (installPackages): beep before changeMedium
-
-2000-09-21 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_listf): try to call the f translation
- function on the default value with the index
-
- * install_steps.pm (afterInstallPackages): make the gpg code work,
- changed the call to
- "gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS"
-
- * detect_devices.pm: cleanup and removed unused code
-
-2000-09-21 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * detect_devices.pm (getNet()): really remove plip in standalone
-
-2000-09-21 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm, netconnect.pm: changed NETWORKING reference
- from false to no.
- * printer.pm: changed timeout from 30 to 60.
- * printerdrake.pm: added wait message when waiting for cups to
- start.
- * pci_probing/pcitable: added erwan VIA Rhine board.
- * network.pm: added DHCP_HOSTNAME reference.
-
-2000-09-21 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-21 Pixel <pixel@mandrakesoft.com>
-
- * standalone/keyboarddrake: fix for XF4
-
- * Xconfigurator.pm (write_XF86Config): comment the omit
- xfree86-dga
-
- * install_steps.pm (afterInstallPackages): configure GPG public
- keyring with mandrake key
-
- * standalone/mousedrake: updated/fixed for new mouse handling
-
- * install2.pm (main): update for handling oem installs
-
- * many files: relGetFile cleanup, updated calls to getFile and
- getAndSaveFile accordingly
-
- * Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg
-
- * detect_devices.pm (@netdevices): plip removed in standalone,
- otherwise plip is always there (because of kmod)
-
- * install_steps_interactive.pm (choosePartitionsToFormat): replace
- the die "cancel" by die "already displayed", so that no error is
- displayed.
-
- * pci_probing/pcitable: replace some rtl8139 by 8139too, added
- cards DELTA8139 and ADDTRON8139 (for jeff)
-
- * Xconfigurator.pm (show_info): also show the colordepth and
- resolution. don't show server if none, show XF4 driver if there's
- one.
- (main): change the "Forget the changes" to "Keep the changes?"
- with displaying the current configuration.
-
-2000-09-21 François Pons <fpons@mandrakesoft.com>
-
- * printer.pm: changed "PostScript" ppd default description to "Raw
- queue (no filtering)", asked by Till.
- * Xconfigurator.pm: add log of what user select for 3D hw
- acceleration.
- * share/compssList: changed XFree86-glide-module to -2 because the
- level is the same for XFree86-Glide* which may have multiple
- different version installed due to dependancies of the first one.
-
-2000-09-21 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (conf_network_card): added check when dhcp. Cable connection
- should now work.
-
-2000-09-21 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (exitInstall): call $o->exit if
- "Some steps are not completed"
-
-2000-09-20 Pixel <pixel@mandrakesoft.com>
-
- * bootloader.pm (install_loadlin_config_sys,
- install_loadlin_desktop): extracted from install_loadlin, do not
- call them anymore (remove it?)
- (suggest): put grub in lnx4win install
-
- * common.pm (availableRamMB): fixed (round to a multiple of 4)
-
-2000-09-20 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (get_info_isdn_providers & read_isdn_providers):
- read file in /usr/share and $prefix/usr/share
- (isdn_write_config): corrected file to be sh compliant.
- (isdn_write_config): added default route settings for isdn.
-
-2000-09-20 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-20 Pixel <pixel@mandrakesoft.com>
-
- * pci_probing/pcitable: replace es1371 by snd-card-ens1371
-
-2000-09-20 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume
-
-2000-09-20 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume
-
- * standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume
-
-2000-09-20 dam's <damien@mandrakesoft.com>
-
- * standalone/draknet: used new package install function.
-
-2000-09-20 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (isFloppyOrHD): detects wether a device is a
- floppy or not based on its size (for scsi floppy)
-
- * Xconfigurator.pm (testFinalConfig): check if "server" OR
- "driver" field is set (otherwise XF4 only card won't pass)
-
- * bootloader.pm (suggest): fix for ``installing the last cooker
- from kenobi:/I on an smp machine i don't get anymore an entry for
- linux-up'' (c chmouel)
-
-2000-09-20 dam's <damien@mandrakesoft.com>
-
- * netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0])
-
-2000-09-20 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-19 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (get_pcmcia_devices): fix (especially, now ethernet
- should be detected)
-
- * lang.pm (get_langs): created, gives rpm install langs
- * install_any.pm (setPackages): give langs::get_langs() to
- readCompssList
- * pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given
- $langs instead. This fixes the RPM_INSTALL_LANG=all install.
-
-2000-09-19 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * netconnect.pm: make dhcp-client, pump and such not translatable.
- Those are program names and should therefore not be translated,
- that only confuses translators
-
-2000-09-19 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm (autologin): corrected @users definition and
- passwd cat.
-
-2000-09-19 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-19 Pixel <pixel@mandrakesoft.com>
-
- * many files: changed some access to get_root to get_root_
-
- * install_steps_interactive.pm (choosePackages): added code for
- desktop meta_class install type
-
- * install_steps_gtk.pm (selectMouse): cleanup, give parameter
- emulate3buttons to setMouseLive
- * c/stuff.xs.pm (setMouseLive): add argument emulate3buttons
-
-2000-09-19 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * interactive*.pm: changed `suspend' and `resume' to behave as expected,
- added `enter_console' and `leave_console'
-
-2000-09-19 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-19 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by
- META_CLASS
-
- * Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false
- result (not enough VideoRam), also remove the found resolutions
- * Xconfigurator.pm (main): remove the automatic searching of
- resolutions
- * Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the
- automatic searching of resolutions.
-
- * mouse.pm (fullnames): changed the `_' in `[' before Other
- (nicer, uh?)
-
- * install2.pm (selectMouse): changed clicked to !first_time
-
-2000-09-19 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-19 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (testFinalConfig): remove the bloody prototype
-
-2000-09-19 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-18 Dam's <damien@mandrakesoft.com>
-
- * Xconfigurator (autologin): do it eve, if newbie. Autologin is
- now in separated function.
-
-2000-09-18 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (testFinalConfig): don't skip the test in auto
- if called via "Test again"
- * Xconfigurator.pm (resolutionsConfiguration): ensure all depth
- are bounded
-
- * bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is
- classic and no-fb
-
- * fsedit.pm (check_mntpoint): add a check for /etc /lib... which
- must not be mount points. Also check that /home, /tmp and /usr are
- on trueFS
-
- * interactive.pm (ask_from_entries_ref): add bounding of "val" in
- case of type "range". die if min > max.
-
-2000-09-18 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-18 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): nicer
- partition/device display
-
- * partition_table_raw.pm (zero_MBR): add on the fly require of the
- good partition_table_$type
-
- * detect_devices.pm (cdroms): fix (yet again) the scd$nb device
- assignment to ide burners
-
- * install_steps.pm (afterInstallPackages): comment out a part of
- the icons mess messing
-
- * Xconfigurator.pm (cardConfiguration): move Unlisted to
- Other/Unlisted
- * share/CardsNames: updated (for Voodoo5)
-
- * install_steps_gtk.pm (selectMouse): fix the test to know wether
- the guy has changed the mouse type (to know wether to test the
- mouse or not)
-
- * install_steps_interactive.pm (selectLanguage): add the license
-
- * install_steps_interactive.pm (choosePackages): have the
- "Recommended" size be the default
- (in the choice Minimum/Recommanded/Complete)
-
- * diskdrake.pm (Type): fix a typo
-
- * install_steps.pm (doPartitionDisksAfter): mark partition as
- mounted
-
-2000-09-17 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-17 Pixel <pixel@mandrakesoft.com>
-
- * install/pcmcia_config.patch: cleaned
-
- * diskdrake.pm (Create, Type): have type field not_editable
-
- * tools/make_mdkinst_stage2: use TMPDIR if available
-
-2000-09-16 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): move
- the setting of toFormat before asking for bad blocks, seems to fix
- things?? weird :-/
-
- * network.pm (miscellaneousNetwork): fix the setting of focus on
- error (tx2Thomas Poindessous :)
-
- * install_steps_interactive.pm (configurePrinter): changed
- "Cancel" to "None" (for Thomas Poindessous :)
-
- * printer.pm (poll_ppd_base): max polling time raised from 10s to
- 30s (for Till)
-
- * install_steps.pm (ask_mntpoint_s): don't force partition type to
- be ext2 (at least if it's a known fs) (for Warly)
-
-2000-09-15 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-15 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (set_help): save the help message displayed
- in $o->{current_help}
- * install_gtk.pm (create_big_help): display $o->{current_help}
-
- * mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice.
- * install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm
- * install2.pm (selectMouse): adapted for mouse::read now returning
- an hash ref
-
- * detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in
- one function (now takes the device in the parameter)
-
- * interactive.pm (ask_from_treelistf): added (just like
- ask_from_listf, but with a tree)
-
- * Xconfigurator.pm: the reference is now nbuttons to
- know wether to put Emulate3Buttons or ZAxisMapping.
- * Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on
- Banshee too.
-
- * Xconfig.pm: guess nbuttons based on Emulate3Buttons and
- ZAxisMapping.
-
- * common.pm (availableRamMB): replace availableRam, now use the
- size of /proc/kcore (what else to find the real ramsize?)
-
- * common.pm (cat__): created
-
- * install2.pm (main): add field meta_class in $o. Can be
- 'desktop', in case option desktop is given, or if /desktop/i is
- found in /VERSION
-
- * install_steps.pm (miscellaneous): for lnx4win, always have
- 'mem=' (so that the initrd is visible by both windows
-
- * install2.pm (main): add option "desktop"
-
- * install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format
-
- * install_interactive.pm (partitionWizardSolutions):
- use only TrueFS for existing_part
- (partitionWizard): have only "loopback" for lnx4win
-
- * pci_probing/pcitable: associate Voodoo5 with Voodoo5
-
- * share/Cards+: add Voodoo5
-
- * bootloader.pm (suggest): add entry linux-nonfb (called linux-up
- for smp)
-
-2000-09-14 DrakX <install@mandrakesoft.com>
-
- * snapshot uploaded
-
-2000-09-12 François Pons <fpons@mandrakesoft.com>
-
- * detect_devices.pm, mouse.pm: moved probing serial port before to
- detect a wacom tablet (even if a PS/2 or USB mouse is found).
- * help.pm: corrected reference to previous version of LM (jloup).
- * install2.pm: removed duplicate code for getting network
- configuration, using network module.
- * netconnect.pm: intf is now a hash and no more an array.
- * network.pm: changed nature of intf to hash from array, reworked
- write_resolv_conf function to keep old code in comment but only
- when not used anymore (to make it easier by hand modification).
- * printer.pm: SOCKET accessible to expert only (jloup).
- * printerdrake.pm: local port only available for expert if a
- printer has been detected (jloup).
-
-2000-09-11 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: reorganized choices of 3D optimizations, added
- experimental support for expert users.
- * install_steps_interactive.pm: removed question to keep XF3.
-
-2000-09-05 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: removed all previous URI specific mode and
- added socket and expert URI general mode.
- * printer.pm: fixed bugs, start lo interface before cups.
-
-2000-09-04 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: added pnm2ppa and lm110 support in cups
- configuration. probe for printer device (parallel) and try to
- install usb for printer.
- * printer.pm: removed local printer configuration for cups (keep
- only local configuration using URI).
-
-2000-09-01 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3
- is installed, make 16bits by default on 3D hardware acceleration,
- fixed selection of hardware for hardware acceleration.
- * install_steps.pm: add cups for printer configuration, used for
- auto_install. added new function to add packages only if requires
- are already satisfied.
- * standalone/printerdrake: updated.
-
-2000-08-31 dam's <damien@mandrakesoft.com>
-
- * moved many things to network.pm and any.pm
- * everything should be broken now.
-
-2000-08-31 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: removed printer default config (now obsoleted).
- * install_steps_interactive.pm: add cups support.
- * printerdrake.pm: add cups support.
- * printer.pm: add cups support.
-
-2000-08-31 Frederic Lepied <flepied@mandrakesoft.com>
-
- * install_any.pm (setPackages): install the right glide module
- according to the Voodoo card detected.
-
- * Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4.
- (autoDefaultDepth): default depth to 16 for Voodoo cards except
- for Voodo5 ones.
-
-2000-08-29 dam's <damien@mandrakesoft.com>
-
- * moved pppConfig in netconnect.pm and any.pm
- * moved miscellaneousNetwork in any
- * modem configuration is now useable in standalone mode.
-
-2000-08-29 David BAUDENS <baudens@mandrakesoft.com>
-
- * install_steps_interactive.pm: change Small/Normal/Full ->
- Minimum/Recommanded/Complete (aka make FredB happy)
-
-2000-08-28 dam's <damien@mandrakesoft.com>
-
- * draknet (netconnect): renamed drakfuck -> draknet. standard ADSL
- and french alcatel ADSL implemented.
- * Xconfigurator.pm (autologin) : use of the new autologin system.
-
-2000-08-24 François Pons <fpons@mandrakesoft.com>
-
- * ../update_kernel*: changed reference from extract_archive to
- packadrake.
- * Makefile*: added live_install and live_install2.
- * Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage
- Pro AGP card type, commented SiS and S3ViRGE support by GLX.
- * commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*:
- updated to use packdrake now.
- * install2.pm, install_steps.pm, install_steps_gtk, Makefile*:
- manage live upgrade.
- * modules.pm: use standard modprobe command for load in live
- upgrade.
- * netconnect.pm: added minimal modification for being compilable.
- * rescue/list: added packdrake and sfdisk.
- * live_install, live_install2: live upgrade of package.
-
-2000-08-22 dam's <damien@mandrakesoft.com>
-
- * drakfuck (netconnect):finished isdn PCI/ISA card implemetation
- * added isdndb.net: providers database
-
-2000-08-20 dam's <damien@mandrakesoft.com>
-
- * moved Netconnect.pm to netconnect.pm
- * moved DrakFuck to drakfuck
-
-2000-08-18 Pixel <pixel@mandrakesoft.com>
-
- * share/Cards+: for i810, force VideoRam
-
-2000-08-18 dam's <damien@mandrakesoft.com>
-
- * modules.pm: added isdn type in @drivers_by_category. corrected
- load_thiskind (thx pixel) : it's not unsafe anymore
- * Netconnect.pm: just display PCI isdn card recognized.
-
-2000-08-17 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm: many cleanup. moved some functions to common,
- any or install_interactive (newly created)
-
-2000-08-16 dam's <damien@mandrakesoft.com>
-
- * install_steps_interactive.pm(configureNetwork): added call to
- isdn configuration
- * added standalone/DrakFuck: standalone entry point to configure
- internet connexion.
- * added Netconnect.pm: internet connexion functions.
-
-2000-08-11 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectInstallClass): yet a bigger
- warning so that people don't choose expert installs. Also set the
- focus on "Custom" by default.
-
- * install_steps_interactive.pm (doPartitionDisks): created, calls
- the wizard.
- * install_steps.pm (doPartitionDisksBefore,
- doPartitionDisksAfter): created (was mainly in
- install2::doPartitionDisks)
- * install2.pm (doPartitionDisks): much cleanup
- * install_any.pm (partitionWizard): working state (still rough)
-
-2000-08-08 Pixel <pixel@mandrakesoft.com>
-
- * standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the
- cdrom addmedia
-
-2000-08-07 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Resize):
- * install_steps_gtk.pm (doPartitionDisks): remove the
- before_leaving ensuring the filehandle is closed
- * resize_fat/main.pm (DESTROY): use a better solution for ensuring
- the filehandle is closed
-
-2000-08-07 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added SiS6326 in the list of chipset that
- needVideoRam, reported on ml.
- * install_steps.pm: fixed auto install of printer.
-
-2000-08-06 Pixel <pixel@mandrakesoft.com>
-
- * interactive.pm (ask_from_listf): created this GREAT function
- that should have been created a long time ago.
- * any.pm, install_any.pm, install_steps_gtk.pm,
- install_steps_interactive.pm: a lot of rewrite to use the new
- ask_from_listf, a lot of nice cleanup!
-
- * fs.pm (df): created, returns the free space of the part. Save it
- in $part->{free}
-
- * install_steps_gtk.pm (doPartitionDisks): ensure the closing of
- the device in case of error
- * resize_fat/main.pm (new): ensure the closing of the device in
- case of error
-
- * install_any.pm (partitionWizard): the great partitioning wizard
- is created. Not finished yet (nor called from anywhere)
-
- * install_steps.pm (doPartitionDisksLnx4win): created function out
- of doPartitionDisks
-
- * install_steps_gtk.pm (installPackages): removed the displaying
- of size to install (people are bothered cuz not the same size)
-
-2000-08-06 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm (create_steps_window): use drawing area
- instead of button. Implemented all steps events.
-
-2000-08-05 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (detect): test a hack for usb mouse via hub
- (sparhawk@enteract.com)
-
- * fsedit.pm (undo): force isDirty and needKernelReread only if hd
- hasBeenDirty, otherwise believe the flag saved
- * partition_table.pm (write): flag hd as hasBeenDirty
-
- * install2.pm: a few renaming of methods so that the step names
- correspond to install2 function and install_steps* methods (eg:
- configureX & setupXfree unified to configureX)
-
-2000-08-04 dam's <damien@mandrakesoft.com>
-
- * any.pm (setAutoLogin): added this method to write xdm-config
- * Xconfigurator.pm: clenead autologin code and use of above method
-
-2000-08-04 Pixel <pixel@mandrakesoft.com>
-
- * pkgs.pm (setSelectedFromCompssList): save $nb to able to restore
- it in case of max_size reached. only purpose is the log!
-
- * install_steps_interactive.pm (choosePackages): in newbie, ask
- between Small/Medium/Full install
- * install_steps_interactive.pm (choosePackages): in expert, have
- the min_mark be 0 instead of 1
-
- * common.pm (find_index): added this nice function
-
- * install_any.pm (getAvailableSpace_mounted): use common::df
- * loopback.pm (getFree): use common::df
- * commands.pm (df): use common::df
- * common.pm (df): added
-
- * diskdrake.pm (Resize)): add resizing of reiserfs
- * share/list.i386: add resize_reiserfs
-
-
-2000-08-02 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm : autologin is functionall. When wmsession.d is
- more up to date, I'll add the list of wm to launch at boot. It
- writes in /etc/X11/xdm/xdm-config.
-
-2000-08-01 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (miscellaneous): modify as chmouel want (aka, ""
- instead of "no" for MOUSE and KEYBOARD in sysconfig/usb)
-
- * services.pm: separation between interaction and action.
- * install_steps.pm (servicesConfig): the job is now done here
- * install_steps_interactive.pm (servicesConfig): only the asking
- part
-
-2000-08-01 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed the below fixe, now ok.
- * Xconfigurator.pm: fixed a bug for using default card flags
- setting, add support for GeForce DDR for both 3.3 and 4.0.
- * pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use
- XFree 3.3 as unsupported in XFree 4.0.
- * share/Cards+: added "NVIDIA GeForce2 DDR (generic)".
-
-2000-07-31 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: fixed provided package with choice in deps used with a
- base package, complicated but kernel-fb or similar can be
- unselected now.
-
-2000-07-27 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: changed expert message to ask
- using XFree 3.3 instead of XFree 4.0 used by default (server).
- * Xconfigurator.pm: make sure only one server is installed,
- default to XFree 4.0 if supported unless XFree 3.3 accept
- 3D acceleration and not XFree 4.0, ask user in such case.
- * pci_probing/pcitable: added Intel 815 pci ids.
-
-2000-07-26 dam's <damien@mandrakesoft.com>
-
- * install_steps_gtk.pm: applied new LN stars, logo title and help
- logo. improved steps appearences.
- * modified share/step-*.xpm
- * added share/help.xpm
- * updated ../HACKING to ling help logo.
-
-2000-07-21 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: enable 3D acceleration configuration with
- XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3
- Utah-GLX accelerated module.
-
-2000-07-20 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: use {miscellaneous}{autologuser} instead of
- {miscellaneous}{autologuser} + {miscellaneous}{autologing}.
- * move some README content to ../HACKING
-
-2000-07-19 dam's <damien@mandrakesoft.com>
-
- * Xconfigurator.pm: added autologin boxes.
- result is in {miscellaneous}{autologin} and in
- {miscellaneous}{autologuser}
-
-2000-07-19 François Pons <fpons@mandrakesoft.com>
-
- * any.pm: added default root to existing root device when adding
- an entry in bootloader.
- * bootloader.pm: avoid duplicating entry (floppy and old-floppy)
- when they are identical.
- manage hackkernel by suggest an entry by default if installed.
- * install_steps.pm: reworked symlink closure for bootloader
- to keep previous configuration.
-
-2000-07-11 François Pons <fpons@mandrakesoft.com>
-
- * bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
- this include a configure_entry from silo.pm to build a initrd if
- used.
- * share/compssList: added kde2 packages.
- * share/compssUsers: added kde2 group, renamed kde to kde1 group
- specific.
-
-2000-07-07 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm (choosePackages): always execute setPackage to copy
- hdlist* and depslist files (support mixed partitionDisks and
- choosePackages).
- * install_any.pm (setPackages): avoid clearing upgrade flag.
- * install_steps.pm (choosePackages): use $first_time to avoid
- reselection of packages according to compssList.
- * install_steps_interactive (choosePackages): use $first_time and
- $individual to avoid reselection of packages according if user go
- back to step choosePackages.
- * pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and
- depslist files in /var/lib/urpmi.
- * diskdrake.pm: fixed uneditable combo for Mount point action.
-
-2000-06-23 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: better approach for Sun* server in newbie.
- * fs.pm: added romfs support for mount.
- * fsedit.pm: changed auto allocation for partitions for sparc*.
- * install2.pm: restored bootdisk creation and auto install boot
- disk creation for sparc*.
- * install_any.pm: changed vfat to romfs when mounting kickstart
- floppy on sparc*.
- * install_steps.pm: avoid proposing formating sunos partition.
- * install_steps_interactive.pm: boot disk for sparc* and support for
- installation of SILO on /boot partition (sparc*).
- * install_steps_newt.pm: removed cylinder 0 bug warning.
- * interactive.pm: fixed typo for not_edit set to 1 by default.
- * partition_table.pm: fixed get_holes on sparc* where a whole disk
- partition caused problems.
- * partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs.
- * silo.pm: handle /boot partition, install silo.conf in /boot and
- make a symlink from /etc.
- * share/list.sparc: added losetup and genromfs for boot disk creation.
-
-2000-06-21 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lang.pm: changed the way console font data is written; not all
- of the [0], [1], [2] values must defined, so three cases must be used.
- Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then
- be used by console-tools to load the proper compose table
-
-2000-06-20 François Pons <fpons@mandrakesoft.com>
-
- * c/sbus.c: added some functions for silo.c integration.
- * c/silo.c: initial release including write in prom, and translation
- of disk name from openprom to linux, rh version modified.
- * silo.pm: added write in prom, support of sunos boot from silo.
- * partition_table.pm: added support for ufs partition like windows one.
- * install_steps_interactive.pm: added other entries in silo.
- * install_steps.pm: support sunos partition.
- * install_any.pm: automatically mount sunos partition with diskdrake.
- * fsedit.pm: added /mnt/sunos suggested mount point.
- * fs.pm: added ufs support for mount.
-
-2000-06-19 François Pons <fpons@mandrakesoft.com>
-
- * crypto.pm: modified for getting sparc crypto file for sparc*.
- * modules.pm: make sure to load sd_mod when needed.
- * pci_probing/main.pm: always use loaw_endian in pci structs.
- * pci_probing/translate-pcitable.pl: added arch specific module name
- translation.
-
-2000-06-16 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (write_conf): rename conf.modules to modules.conf if
- needed. Outputs to modules.conf
-
- * detect_devices.pm (cdroms): fix using scd0 for ide-burners when
- already a scsi cdrom drive
-
-2000-06-13 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * pkgs.pm: added 'acon' requirement for all right-to-left languages
-
-2000-06-07 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm: added SunOS partition as blue for diskdrake.
- * install_steps_interactive.pm: make sure of no division by zero may
- happen.
- * install_steps_newt.pm: added WARNING for fdisk on sparc*.
- * modules.pm: make sure of loading sd_mod module after any scsi module.
- * sbus_probing/main.pm: insmod openprom before trying sbus probing.
- * pkgs.pm: corrected by use of parabolic solution for size approximation.
- * silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe.
-
-2000-06-05 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * install_steps.pm,lang.pm: added load_console_font, to load the
- proper console fonts (text mode install is not very useful otherwise)
-
-2000-06-03 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Create): don't accept less than 32MB part for reiserfs
- * diskdrake.pm (Type): don't accept less than 32MB part for reiserfs
-
-2000-06-01 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font;
- it fits better with the other fonts. Added a 'README' file with
- some comments and the required copyright notice
-
-2000-05-29 François Pons <fpons@mandrakesoft.com>
-
- * Xconfigurator.pm: added support for SBUS card autodetection.
- * commands.pm: added lssbus to list SBUS devices detected.
- * detect_devices.pm: removed alpha restriction on USB.
- * install_steps_interactive.pm: added SBUS support.
- * c/sbus.c: initial revision, core SBUS support (inspired from kudzu).
- * c/stuff.xs.pm: added wrapper for sbus.c interface.
- * sbus_probing/main.pm: initial revision (inspired from kudzu).
-
-2000-05-27 Adam Lebsack <adam@mandrakesoft.com>
-
- * share/list.ppc: various PPC modifications, for HFS
- * partition_table_mac.pm: bug fixes
- * partition_table.pm: various HFS fixes, isHiddenMacPart()
- * diskdrake.pm: added HFS to top buttons when run on PPC
- * keyboard.pm: fixed name of mac-fr2-ext keymap
- * install_steps_gtk.pm: added Xpmac server support for PPC.
- * install_steps_interactive.pm: disallow hardware configuration on PPC for
- now. All drivers should be in the kernel. setup_this_kind().
- * fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match
- our partition table read. Added PPC grep condition for PPC in get_visible_fstab.
- * fs.pm: fix argument for HFS formatting.
- * Makefile: special installation of PPC files.
-
-2000-05-25 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-
- * standalone/drakboot: Don't display Configure-/LILO/GRUB/ on
- alpha|sparc.
-
-2000-05-25 François Pons <fpons@mandrakesoft.com>
-
- * silo.pm: added configure_entry to try creating an initrd for an image
- entry in bootloader. fixed wrong usage of run_programm::rooted with 2>.
- * commands.pm: fixed insmod command to take modules64.cz* on sparc*
- * install2.pm: removed create boot disk and create auto install disk on
- sparc*. force writing of /etc/conf.modules for step setupBootloader.
- * install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*.
- * install_steps_interactive.pm: added missing $prefix for glob_. call
- configure_entry in setupSILO. fixed cancel or None entry on setupBootloader.
- * modules.pm: updated alias for sparc*.
- * any.pm: fixed proprable wrong test for setupBootloader in beginner at
- the very beginning.
- * printer.pm: fixed typo.
- * Xconfigurator.pm: avoid testing if using a Sun* server, added depth and
- resolution for these server too.
-
-2000-05-24 François Pons <fpons@mandrakesoft.com>
-
- * partition_tabel.pm: fixed wrong detection of DOS partition on sparc*.
- * partition_table_sun.pm: fixed a bug when reading partition table
- with unused partition in the middle of the table.
-
-2000-05-23 François Pons <fpons@mandrakesoft.com>
-
- * common.pm: update arch to take into account sparc and sparc64. added
- better_arch and compat_arch function.
- * silo.pm: fixed adding new kernel automatically.
- * install2.pm: removed create boot disk stuff for sparc*.
- * install_steps.pm: added initrd generation for alpha. added ldconfig
- at end of installation. removed /usr/bin/dumpkeys existence test on
- sparc*, should be added in the future.
- * install_steps_interactive.pm: removed supermount for sparc*.
- * install_steps_gtk.pm: added /dev/kbd device creation and permedia2
- support for sparc*. removed screen limit of 1024x768.
- * detect_devices.pm: fixed problem on machine with really no IDE interface.
- * modules.pm: added support for 32 and 64 bit architectures on sparc*.
- * install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate
- partition.
- * pkgs.pm: added support for multi-arch rpm file (need for sparc*),
- fixed correctSize and invCorrectSize to take back a linear approximation
- above 9Gb approximatively. removed ftp rewind as broken currently.
- * keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed
- globing (removed) against existing '*'.
- * partition_table.pm: removed support for non SUN partition table, as it
- may freeze the kernel or may be blanked?
- * Xconfigurator.pm: take Sun24 server by default on sparc*, add support
- for permedia2 card (3DLabs server).
- * share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*.
- * Makefile: added support for modules and modules64 for sparc*.
- * c/stuff.xs.pm: added kernel_arch function for getting the current true
- architecture provided by the kernel (uname -m).
-
-2000-05-09 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (kdeicons_postinstall): the URL link to doc must
- be $lang/index.html, not only $lang.
-
- * standalone/mousedrake: add handling of XF86Config-4
-
- * any.pm (setupBootloader): fix bug (was adding 2 glob_'s)
-
-2000-05-08 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): move the touch of some files here to please linuxconf
-
- * install2.pm (miscellaneous): s/KBD/KEYBOARD/
-
- * lilo.pm (install_grub): don't keep symlinks for reiserfs
- * lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)
-
- * install_any.pm (getHds): default mount point for windobe in
- lowercased for StartOffice(!)
-
-2000-05-08 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
- Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
- * keyboard.pm: Added new Lithuanian keyboard and changed the
- string for brazilian ABNT-2 to state more clearly its ABNT nature
- (it is not a standard PC keyboard; it uses some different keycodes)
-
-2000-05-07 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (choosePackages): return availableCorrected
- instead of available
-
- * pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)
-
- * modules.pm (text2driver): same as text2lang below
- * keyboard.pm (text2keyboard): same as text2lang below
- * lang.pm (text2lang): replace the while (... each) by a foreach
- (keys) (because each is dangerous if loop is exited)
-
- * install_steps_interactive.pm (selectKeyboard): better handling
- of multiple langs question.
-
- * ftp.pm (new): Timeout set to 60 (seconds), was default (120)
-
- * install_steps_interactive.pm (setup_thiskind): remove ide-*
- from modules displayed as loaded.
-
-2000-05-06 Pixel <pixel@mandrakesoft.com>
-
- * fsedit.pm (check_mntpoint): verify that standard mntpoints (/
- /usr) are not on not trueFS
-
- * any.pm (setupBootloader): add $prefix for the 2 glob_'s
-
-2000-05-07 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua
-
-2000-05-06 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * printerdrake.pm: fixed English error
-
-2000-05-05 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm (monitorConfiguration): remove the special case
- for fbdev.
-
- * install_steps_interactive.pm (setup_thiskind): replace return by
- next in case load_module fails.
-
- * install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade
-
- * Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
- * Xconfigurator.pm (testFinalConfig): force $bad_card for xf4
-
- * pkgs.pm (correctSize): updated for 7.1
-
- * install_any.pm (getAvailableSpace): move the removing of
- $minAvailableSize here.
-
-2000-05-04 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (configurePrinter): give clicked to printerConfig
-
- * interactive.pm (ask_from_entries_ref): set default val if not_edit
-
- * interactive_newt.pm (ask_from_entries_refW): remove setting of
- default val. Now done in interactive::ask_from_entries_ref
-
- * interactive_gtk.pm (ask_from_entries_refW): handle empty value
-
- * modules.pm (read_already_loaded): ensure that already loaded
- modules are put in %loaded.
- * modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)
-
- * lilo.pm (install_lilo): truncate label's to 15 chars
-
- * install_any.pm (generate_ks_cfg): fix missing space
- * install_any.pm (generate_ks_cfg): fix bug for nfs comand
-
- * install2.pm: get rid of autoformat
- * install_steps.pm (choosePartitionsToFormat): get rid of autoformat
-
-2000-05-03 Pixel <pixel@mandrakesoft.com>
-
- * any.pm (setupBootloader): replace ask_many_from_list by
- ask_from_list for bootloader choice
-
- * services.pm (drakxservices): stop immediately service if removed
-
- * install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
- * install_steps.pm (afterInstallPackages): touch some files to
- please linuxconf
-
-2000-05-03 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: updated min size, fixed kppprc generation.
- * install_any.pm: make sure postinstall-rpm is here before
- erasing (avoid error on reboot only).
-
-2000-05-02 Pixel <pixel@mandrakesoft.com>
-
- * raid.pm (format_part): don't call raid::make if part is already
- formatted (as raidstop fails)
-
- * Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
- more
-
- * install_steps_interactive.pm (setup_thiskind): make insmod'ing
- fail a simple warning.
-
- * Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
- * share/MonitorsDB: take new one from RedHat
-
- * standalone/drakboot: added kfloppy
-
- * g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
- not to have it)
-
-2000-05-01 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setRootPassword): remove
- NIS_server, use NIS instead
- * install_any.pm (setAuthentication): remove NIS_server, use NIS instead
-
- * standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist
-
-2000-04-28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps.pm (afterInstallPackages): fix yet another bug for
- ttf from windobe handling
-
- * install_steps_interactive.pm (selectInstallClass): hide beginner
- mode in corporate. Display special help.
-
-2000-04-29 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
- text to be properly aligned (reported by Craig Chang
- <craig_chang@taipei.siscomm.com.tw>)
- * common.pm: now that po handling is correct, I changed the order
- of reading variables so that it follows the standards ($LANGUAGE first)
- * share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251
-
-2000-04-28 François Pons <fpons@mandrakesoft.com>
-
- * install_steps*.pm: added support for selection of package during
- upgrade the same way it is done for installation. added check of
- minimal size, abort else (at least let the user know about :-)
- fixed crypto if no network interface available.
- * install2.pm: fixed problem during upgrade that lost network
- configuration.
-
-2000-04-28 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (load_raw): don't call commands::insmod, do it in
- place. Merge with load_multi
-
- * install_steps.pm (afterInstallPackages): fix windobe ttfonts
- symlinking
-
- * Xconfigurator.pm (cardConfiguration): load module agpgart for
- i810
-
- * install_any.pm (getHds): changed the mount point setting for
- windows partitions as device_windobe is not unique
-
-2000-04-27 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (create_steps_window): changed to adapt to
- new hidden format
-
- * install2.pm (@installSteps): changed the way hidden is handled.
- Now it is a true perl expression (great power now)
-
- * install_steps_gtk.pm (selectInstallClass1): update steps window
- before asking normal/devel/server. Nicer!
-
- * install_steps_interactive.pm (configureNetwork): when "Cancel"
- pressed at network interface configuration do not skip all
- configuration.
-
-2000-04-26 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm (pppConfig): modified a lot, removed template
- file for ifcfg and chat file.
-
-2000-04-26 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (choosePackagesTree): use a fix width for
- the tree column (so that the checkbox are always visible without
- scrolling)
-
- * standalone/drakboot: drakfloppy and gfloppy are X only, no need
- to propose them in console
-
- * install_any.pm (relGetFile): added auto_inst to files to get
- from Mandrake/base
-
- * install2.pm (main): changed auto_inst behaviour
-
- * standalone/adduserdrake: fix a bug (s/$o/$in/g)
-
- * interactive_newt.pm (ask_from_entries_refW): now handling
- complete/changed/focus_out callbacks (at least more than before)
-
- * Newt/Newt.xs: added rough callback handling
-
-2000-04-25 François Pons <fpons@mandrakesoft.com>
-
- * printerdrake.pm: added support for PPA more easily, allow
- printers entry using ppa driver event if pnm2ppa not installed,
- install it if neccessary after.
- * network.pm, install_steps.pm, install_steps_interactive.pm:
- added support for stoping a network interface, usefull for ppp0 to
- avoid using it too long.
- * install_steps.pm: fixed missing local on pap_secrets file.
-
-2000-04-25 Pixel <pixel@mandrakesoft.com>
-
- * lilo.pm (install): moved the generation of the keytable here. It
- is used by both lilo & grub (lilo is not always installed as was
- assumed)
-
- * common.pm (formatAlaTeX): remove bounding spaces
-
- * pkgs.pm (setSelectedFromCompssList): remove the hack for min
- mark 25 in beginner
- * install_steps_interactive.pm (choosePackages): set $min_mark to
- 25 in beginner
-
-2000-04-24 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (setupXfree): add a yesorno
- question for choosing between XF4 and XF3 in expert
-
- * install_steps_gtk.pm (choosePackagesTree): enlarge the tree window
-
- * install_any.pm (update_userkderc): make sure uid and gid are kept
-
- * diskdrake.pm (Create): add Extended_0x85 as a choice for expert
-
- * partition_table.pm (add_extended): handle a 3rd arg,
- $extended_type to tell which kind of extended partition is wanted
- * partition_table.pm (adjust_main_extended): in non-expert,
- automatically set extended to linux-extended if there's only
- linux-type partitions.
-
-2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>
-
- * install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
- and not for byte. RAM is expressed in megabytes -> MB
-
-2000-04-19 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: fixed crazy mutli CD manipulation.
- * printer.pm: fixed wrong prototype of print_pages.
- * install2.pm: set version to 7.1 for crypto stuff.
- * crypto.pm: commented ackbar crypto site.
-
-2000-04-17 Pixel <pixel@mandrakesoft.com>
-
- * lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
- linuxconf)
-
-2000-04-14 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePartitionsToFormat): don't
- ask about checking bad blocks for reiserfs, cuz not handled
-
- * fs.pm (mount): reiserfs handling
- * fs.pm (format_reiserfs): added
- * fs.pm (write_fstab): add option "notail" for reiserfs if
- the partition holds the kernel (/boot or /)
-
- * partition_table.pm (isTrueFS): added, replaces most occurences
- of isExt2
-
-2000-04-12 François Pons <fpons@mandrakesoft.com>
-
- * install2.pm: force installation step if package have been
- selected on step choose packages.
- * install_any.pm: protected against die in perl (setstep or
- theme_changed).
-
-2000-04-11 François Pons <fpons@mandrakesoft.com>
-
- * resize_fat: added some limits verification.
- * interactive_gtk.pm: corrected swap of arg with help adding.
-
-2000-04-10 François Pons <fpons@mandrakesoft.com>
-
- * interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
- which is used by printerdrake only. drops key bindings.
-
-2000-04-07 François Pons <fpons@mandrakesoft.com>
-
- * tools/serial_probe: obsoleting pnp_serial which is now replaced
- by this one, taken from kudzu, really faster and probe all serial
- devices at one time. modified to probe correctly modem :-)
- * mouse.pm: updated to use serial_probe interface of
- detect_devices.pm.
- * detect_devices.pm: modified to use serial_probe, cache probed
- devices to avoid reprobing.
-
-2000-04-06 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm, install_steps.pm: added support
- for peerdns options of ppp, so removed dns address unless expert.
-
-2000-04-05 François Pons <fpons@mandrakesoft.com>
-
- * crypto.pm, install_steps_interactive.pm, install2.pm,
- install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
- and depslist-crypto. dependancies are not supported but with a
- simpler format of depslist file where closure are not done and
- only package name are used for dependancies.
- * pkgs.pm: added better support for multi CD manipulation,
- including selection and refus.
-
-2000-04-04 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm: modified selection packages from compssList by
- incremental selection, much more quickly.
- added selected medium for selecting a package.
- * install_any.pm: refused media hash transfered to selected value
- of media table.
- @needToCopy list should only have package of default medium.
-
-2000-04-03 Pixel <pixel@mandrakesoft.com>
-
- * fs.pm (format_ext2): add options "-b 1024 -O none" for alpha
-
-2000-03-31 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_gtk.pm: made changeMedium sub modification
- permanent.
- * pkgs.pm: modified upgrade to avoid use of header.
-
-2000-03-31 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: some more choices for PPC keyboards
-
-2000-03-30 François Pons <fpons@mandrakesoft.com>
-
- * install2pm: added eval around loading af_packet and postinstall
- copy of RPMS.
- * devices.pm: added /dev/kdb for SPARC.
- * install_any.pm: modified multi CD management, postinstall copy
- of RPMS.
- * install_steps_gtk.pm: added support for Xsun server for SPARC.
- * install_steps_interactive.pm: added multi CD dialog box for
- selecting CD available. Serialized ethernet configuration and ppp
- configuration.
- * pkgs.pm: added check for infinite recursion for bad depslist.
- * printer.pm: better test for reparse of printerdb.
- * Xconfigurator.pm: added support for Xsun server for SPARC.
-
-2000-03-30 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (choosePackagesTree): enhance tree selection
-
-2000-03-29 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (wait_messageW): add some padding (nicer)
-
- * install_steps_interactive.pm (generateAutoInstFloppy): created,
- creates a floppy for auto installs.
-
- * install_any.pm (generate_ks_cfg): created, generates stage1
- ks.cfg file
-
- * share/po/DrakX.pot: added special comment for grub entry
-
-2000-03-28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (selectKeyboard): sort langs for
- many-lang install
-
- * mouse.pm (write): add WHEEL telling if a wheel mouse is there
-
-2000-03-28 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: added entries for all three Armenian keyboards
-
-2000-03-26 Pixel <pixel@mandrakesoft.com>
-
- * install_any.pm (install_urpmi): full support for multi-hdlist's
-
- * pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
- $prefix/var/lib/urpmi
- * pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
- fake name. Access via /tmp/$hdlist is given for non-fake name
-
- * detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)
-
-2000-03-25 Pixel <pixel@mandrakesoft.com>
-
- * lilo.pm: updated to the new format of entries. It was an hash.
- Now the key is field kernel_or_dev, and entries is an array.
-
- (get): added, it returns the entry using a kernel
- (needed because entries is no more a hash)
-
- * install_steps_interactive.pm (setupLILO): adapted to the new format
-
- * Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling
-
- * fsedit.pm (suggest_part): if suggested part contains a field
- "hd", ensure the partition is created on this hard drive
-
- * install2.pm (main): before leaving installation, remove
- /var/lib/urpmi if urpmi not installed
-
- * diskdrake.pm (Resize): ext2resize to size $part->{size} instead
- of $size
-
-2000-03-24 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (hasHPT): added. Now nice handling of hpt366
- (ultra66) without rebooting and making special floppy :)
-
- * lilo.pm (install_grub): much better grub configuration (better
- than lilo's :pp)
-
- * install_steps.pm (setupBootloaderBefore): remove entry floppy
- for security > 3
-
-2000-03-23 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (selectMouse): added, takes care of telling
- the X server if the user changed the mouse type. Only done if
- a serial mouse is chosen.
-
- * install_steps_newt.pm (doPartitionDisks): add a call to
-
- * mouse.pm (write): added "device=" in etc/sysconfig/mouse for
- devfs (it looses the symlink /dev/mouse)
-
-2000-03-22 Pixel <pixel@mandrakesoft.com>
-
- * pci_probing/pcitable: replace Server:Rage128 by proper XFree entry
-
-2000-03-20 François Pons <fpons@mandrakesoft.com>
-
- * detect_devices.pm, fs.pm, install_any.pm: added supports for
- LS-120 floppy drive and icons on desktop of KDE (untested).
- * printer.pm, printerdrake.pm: added supports for PPA interface in
- new rhs-printfilters, always enable "Print text as postscript"
- option for such printers.
-
-2000-03-20 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * keyboard.pm: changed XKB name for Swedish keyboard
- changed XKB names for Russian and German keyboards
- added a choice for "Croatian" keyboard
- * share/compss{,List}: added various new locales-*, ispell-*
- and netscape-* files. changed ppa to pnm2ppa.
-
-2000-03-17 François Pons <fpons@mandrakesoft.com>
-
- * install_steps.pm: added setup for all configured queue.
- * install_steps_interactive.pm: modified for retrieving packages
- or current configuration.
- * printer.pm: correction, tested retrieve of printer
- configuration without printtool comments in printcap file: added
- update of entry according to gsdriver used (untested again).
- * printerdrake.pm: better handling of cancel, manage of multiple
- queue definition together (as lp|My printer).
-
-2000-03-16 François Pons <fpons@mandrakesoft.com>
-
- * install_steps_interactive.pm: moved in printerdrake.pm the test
- of printer usage.
- * printerdrake.pm: heavy modification to handle multiple queue,
- corrected some bugs too, added much more features as printtool.
- * printer.pm: added more features for filter, allow printer to be
- retrieved without help of printtool id in printcap file (untested).
-
-2000-03-14 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Loopback): handling of the file loopback: test
- existence of the file and take its size.
-
-2000-03-14 François Pons <fpons@mandrakesoft.com>
-
- * install_any.pm: corrected for duplicate file on other CD.
-
-2000-03-13 Pixel <pixel@mandrakesoft.com>
-
- * detect_devices.pm (floppies): don't return hash but the device name
-
-2000-03-13 François Pons <fpons@mandrakesoft.com>
-
- * pkgs.pm, install_any.pm: small correction for multiple media
- installation.
- * tools/syncrpms: added for handling synchronisation of multiple source
- rpm directories (and multiple target), include cleaning.
- * tools/closurepkgs: tools to get rpm that may be installed by DrakX
- after normal packages installation (printer, network, X11...), may
- be used to duplicate on other CD some important stuff of the first
- one.
-
-2000-03-12 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_interactive.pm (choosePackages): compute the
- max_size very simply (sum of all package sizes), otherwise too costly
-
- * pkgs.pm (install): call cleanHeaders at the end
- * pkgs.pm (cleanHeaders): created
-
- * install2.pm (miscellaneous): /etc/msec/init.sh is now
- /usr/sbin/msec (yoann thanks for not telling :pp)
-
- * pkgs.pm (install): remove the $prefix of mountpoints for not
- enough room to install error message
-
-2000-03-11 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm (_create_window): add callback on focus to
- ensure_focus. The result is no more 3 focus states with 2 buttons.
-
- * interactive_gtk.pm (ask_from_treelistW): better keyboard handling
-
- * raid.pm (make): check the result of mkraid. Suggest raidtools
- are missing in standalone diskdrake
-
- * devices.pm (set_loop): created, searches for an available
- loopback and sets the file to it
-
- * lilo.pm (dev2grub): fixed a missing slash
-
- * interactive_gtk.pm (wait_message_nextW): do not update if same
- message, otherwise silly gtk won't do anything and we'll wait
- forever :(
-
-2000-03-10 François Pons <fpons@mandrakesoft.com>
-
- * *.pm: heavy modification to take into account multiple media
- installation.
-
-2000-03-10 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (@install_classes): cleanup, no more i18n (is now in
- install_steps_interactive), remove old entries
-
-2000-03-09 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (write_conf): don't add alias block-major-11 in every case
- * modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)
-
- * fs.pm (format_*): move the @options before the device
-
- * loopback.pm: created, added a lot of stuff for loopback in
- diskdrake.pm, fs.pm...
-
-2000-03-08 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm: %type2fs replaced ox402 by 0x402
-
- * detect_devices.pm (cdroms): fix "scd" (should be "scd0")
-
- * install_any.pm (install_urpmi): update for new hdlist.cz2
-
-2000-03-07 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/
-
- * install_steps_interactive.pm (addUser): force add a normal user
- for security 4
-
-2000-03-05 Pixel <pixel@mandrakesoft.com>
-
- * my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
- (tis the Gtk-Perl 0.7002 was of doing)
-
-2000-03-04 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (write_conf): add ide-floppy to the modprobes of
- post-install supermount
-
-2000-03-03 Pixel <pixel@mandrakesoft.com>
-
- * commands.pm (ps): add RSS to ps command
-
-2000-03-02 Adam Lebsack <adam@mandrakesoft.com>
-
- * mouse.pm: added mac mouse detection to mouse::detect.
- * detect_devices.pm: added a routine to probe /dev/usbmouse on macs.
-
-2000-03-01 François Pons <fpons@mandrakesoft.com>
-
- * *.pm: heavy modification to take into account smaller
- transaction during installation.
- still a lot of test to perform, no provides updated currently and
- building of hdlist.cz2 and depslist.ordered need old files...
- nothing done for hdlist.gz during post installation, but
- hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
- installation of packages as extract_archive need a true file].
-
-2000-03-01 Pixel <pixel@mandrakesoft.com>
-
- * lilo.pm (install_grub): creation
-
- * network.pm (write_interface_conf): ONBOOT = !pcmcia
-
- * install_steps_gtk.pm (new): more intelligent SIGCHLD handler
-
-2000-02-29 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm: moved common network stuff from "net" to "network"
- (modules like nfs lockd...)
-
- * fs.pm (write_fstab): moved the sort to the right place
-
- * services.pm (drakxservices): chkconfig --list is i18n'ed :(
- set LANGUAGE=C before
-
- * partition_table_raw.pm (get_geometry): geom{cylinders} must not
- be a decimal value :)
-
- * install_steps_gtk.pm (create_logo_window): set_name logo for
- logo window
- * share/install.rc: force disabling of background image theme
-
- * install_steps_gtk.pm (enteringStep): add step information for
- console 1
-
- * any.pm (addKdmIcon): new function
- * install_steps.pm (addUser): handle field icon
- * install_steps_interactive.pm (addUser): add choice of kdm icon
- * standalone/adduserdrake: add choice of kdm icon
-
- * diskdrake.pm (ask_all_data...): change for easier i18n
-
- * install_steps.pm (miscellaneous): add CLEAN_TMP handling
- (need cleaning?)
- * install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
- option in expert
- * install2.pm (miscellaneous): add CLEAN_TMP option for
- /etc/sysconfig/system
-
- * install_steps_interactive.pm (miscellaneous): forbidden
- useSupermount if high security.
-
- * mouse.pm (detect): fix bug (ttyS instead of ttyS0)
-
-2000-02-28 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
- svga and accel. SVGA also wants 16 bpp. added ugly modeline for
- 800x600.
-
- * partition_table_raw.pm (get_geometry): when the
- HDIO_GET_IDENTITY fails, defaults to what GETGEO gave
-
- * install2.pm (main): use modules::load_multi to increase boot
- start time
-
- * modules.pm (load_multi): added this function for loading many
- modules at once.
-
- * install_steps_gtk.pm (new): increase time before timeout
-
- * detect_devices.pm (cdroms): change the device associated with
- ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(
-
- * modules.pm (write_conf): sort scsi_hostadapter's
-
-2000-02-27 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): load ide-probe and the like in 'prereq' type
- so no aliases are added to conf.modules
-
-2000-02-25 Pixel <pixel@mandrakesoft.com>
-
- * devices.pm (make): small code cleanup
-
- * partition_table_raw.pm (adjustEnd): more explicit error message
-
- * fsedit.pm (allocatePartitions): fix a bug (size was getting too
- big after each allocation) making adjustEnd cry
-
-2000-02-24 Pixel <pixel@mandrakesoft.com>
-
- * interactive_gtk.pm (new): added the "new" method to initialize
- windowheight for isStandalone
-
- * install_steps_gtk.pm (new): returns undef in case no X server
- works
-
- * install2.pm (main): moved the ejectCdrom from install_steps::END
- to here
- * install2.pm (main): fix the $SIG{SEGV} handler
- * install2.pm (main): added a "try again" in text install if the
- "new" fails
-
- * install_steps_interactive.pm (createBootdisk): fix an error for
- non fdX choice of floppy drive
-
- * install_steps_interactive.pm (setup_thiskind): remove the
- "defined @l"
-
-2000-02-23 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (%suggestedPartitions): remove any /boot entries
- * install2.pm (selectInstallClass): removed the special code to
- /boot entries from suggestedPartitions for on non-intel (and it
- was buggy :)
- * fsedit.pm (@suggestions): remove the /boot entry
- * fsedit.pm (check_mntpoint): remove the 1024 cylinder check
- * fsedit.pm (suggest_part): remove the 1024 cylinder special case
-
- * install_steps_interactive.pm (setupLILO): replace linear option
- by lba32
-
- * lilo.pm (suggest): add lba32 by default
-
- * install_steps_interactive.pm (load_thiskind): moved the HPT
- stuff to install_any::ultra66 and call it.
- Add sound card configuration (3 lines :)
-
- * my_gtk.pm and interactive_gtk: resize the list and tree based on
- root window size
-
- * install_steps_gtk: $width and $height goes $::rootwidth and
- $::rootheight, also other dimensions goes global (main::)
-
- * commands.pm (strings): replace the typo \{$n,} by {$n,}
-
-2000-02-23 François Pons <fpons@mandrakesoft.com>
-
- * build_archive, extract_archive: changed format of TOC to speed
- up extraction of archive, now 5 to 6 times faster to read TOC :-)
-
-2000-02-22 Pixel <pixel@mandrakesoft.com>
-
- * Xconfigurator.pm: load "Cards" database only to translate NAME
- to fields. Added file CardsNames created from Cards using
- share/Cards2CardsNames. Kind of list of normalized NAMEs
-
- * MonitorsDB: replace the ` ' separator for vendor by `|'
-
- * install_steps_interactive.pm (timeConfig): use ask_from_treelist
-
- * interactive_gtk.pm (ask_from_treelist): creation of
- ask_from_treelist. Usage is just the same as ask_from_list with
- one more argument (the separator eg: |, /)
-
-2000-02-21 François Pons <fpons@mandrakesoft.com>
-
- * diskdrake.pm: fixed deadlock while trying to create partition
- when available space is equal or less than 2 cylinders. fixed
- Create action on corrupted partition by removing stalling window.
- Blocked partition table writing if there are error by forcing user
- to correct partition table.
- * partition_table.pm: fixed typo in verifyParts with cdie, added
- verifyParts on Resize action.
-
-2000-02-21 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (create_big_help): display the help in full
- screen
-
- * my_gtk.pm (_create_window): add big help on F1
-
- * common.pm (add2hash): now returns the first parameter
-
- * mouse.pm (detect): really defaults to serial mouse
-
- * interactive.pm: add ask_many_from_list_with_help and
- ask_many_from_list_with_help_ref
-
- * services.pm: creation, it handles what was in
- standalone/drakxservices
-
-2000-02-18 Pixel <pixel@mandrakesoft.com>
-
- * install_steps_gtk.pm (createXconf): added /dev/ (X wants
- "/dev/psaux" and not "psaux")
-
- * diskdrake.pm (Create): show start sector even for non-expert on
- non-i386
-
-2000-02-16 Pixel <pixel@mandrakesoft.com>
-
- * mouse.pm (detect): add defaults to serial mouse
-
- * install_steps_gtk.pm (createXconf): remove the defaults to
- serial mouse
-
-2000-02-15 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm: "After %s partition %s," inlined otherwise does
- not please pablo and translators...
-
-2000-02-14 Pixel <pixel@mandrakesoft.com>
-
- * diskdrake.pm (Create): hide start sector choice for non-expert
-
-2000-02-11 Pixel <pixel@mandrakesoft.com>
-
- * partition_table_raw.pm (get_geometry): do not use the cylinder
- number given by HDIO_GETGEO cuz limited to 16bits. Compute using
- the total_sectors using HDIO_GET_IDENTITY
-
- * c/stuff.xs.pm: added total_sectors (gives the number of sector
- of a drive)
-
- * modules.pm (load): ignore error in loading prereq's
-
- * modules.pm (@drivers_by_category): rcpci instead of rcpci45,
- z85230 added
-
- * commands.pm (mount): add modules::load_deps otherwise the
- fs::mount won't succeed insmoding vfat if needed
-
-2000-02-11 François Pons <fpons@mandrakesoft.com>
-
- * fixed diskdrake to handle limit case when creating and resizing
- partition table, address size limit and start sector limit.
-
-2000-02-11 Pixel <pixel@mandrakesoft.com>
-
- * install2.pm (main): add a callback on SEGV
- -> message printed
- -> that way, ENDs are called (otherwise skipped)
-
- * install_steps_interactive.pm (setup_thiskind): handles the undef
- value returned by load_thiskind
-
- * install_steps_interactive.pm (exitInstall): do not call
- install_steps::exitInstall
-
- * install_steps (exitInstall): removed
- * install_steps (END): added (it does ejectCdrom)
-
- * install_steps_interactive.pm (load_thiskind): returns undef if
- error loading a module
-
- * fs.pm (format_part): changed the prototype from $;$@ to $;@
- otherwise, @options always have a value (mostly undef) and mkdosfs
- fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)
-
- * install_steps_interactive.pm (setup_thiskind):
- add a $auto_probe_pci that overrules $o->{auto_probe_pci}
- (that way no pci probe the second time)
-
-2000-02-10 François Pons <fpons@mandrakesoft.com>
-
- * heavy modification of build_archive and extract_archive to manage
- a TOC directly in archive file, handle bzip2 or gzip compression,
- extract_archive can extract multiple files a time, with minimal
- invocation of uncompress program and follow symlink and expand
- directory contents.
- * use build_archive/extract_archive for locales.
- * fixed a min/max in install_steps_gtk for Resize/Create partition.
- * fixed adjustEnd with dos partition table, take care of magic 63
- sectors at beginning of partitions, a more solid method should be
- used for that.
-
-2000-02-10 Pixel <pixel@mandrakesoft.com>
-
- * modules.pm (load_thiskind): skip modules "unknown" and "ignore"
-
-2000-02-09 Pixel <pixel@mandrakesoft.com>
-
- * partition_table.pm (add): cdie if maximum number of partitions
- handled by linux is reached
-
- * Xconfigurator.pm (chooseResolutionsGtk): display the graphic
- card or server found
-
- * install_any.pm (relGetFile): for mdkinst files, take care not to
- have a double '/' (see debbugs #591)
-
- * install_steps_interactive.pm (configureNetwork):
- purpose: add ability to configure both modem and lan
- clean up the behaviour
-
- * fs.pm (write_fstab):
- purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
- also: rewrite of the part writing the fstab.
diff --git a/perl-install/Makefile b/perl-install/Makefile
deleted file mode 100644
index 373ccebc3..000000000
--- a/perl-install/Makefile
+++ /dev/null
@@ -1,237 +0,0 @@
-PACKAGE=drakxtools
-PKGVERSION:=$(shell rpm -q --qf '%{VERSION}\n' --specfile $(PACKAGE).spec|head -1)
-RELEASE:=$(shell rpm -q --qf '%{RELEASE}\n' --specfile $(PACKAGE).spec|head -1)
-TAG := $(shell echo "V$(PKGVERSION)_$(RELEASE)" | tr -- '-.' '__')
-
-include Makefile.config
-
-POFILES = $(shell ls share/po/*.po)
-MOFILES = $(POFILES:%.po=%.mo)
-DISTFILES = Makefile Makefile.config Newt apps.net_monitor diskdrake c ddcprobe drakxtools.spec pam.net_monitor serial_probe share/po sbus_probing resize_fat share/diskdrake.rc $(STANDALONEPMS) standalone/icons pixmaps network standalone/interactive_http rpcinfo-flushed.c *.pm security harddrake
-OTHERS = $(OTHERDIRS) $(OTHERFILES)
-OTHERDIRS = tools/ddcprobe tools/serial_probe
-OTHERFILES = tools/rpcinfo-flushed.c
-
-.PHONY: all $(DIRS) install clean stage2 full_stage2 verify_c
-
-all: list_modules.pm TAGS $(DIRS)
-
-list_modules.pm:
- ln -sf ../kernel/list_modules.pm
-
-TAGS: $(ALLPMS)
- etags -o - $^ /usr/lib/perl5/*/*/MDK/Common/*.pm | ./perl2etags > $@
-
-clean:
- for i in $(DIRS) share/po; do $(MAKE) -C $$i clean; done
- rm -rf auto ../drakxtools.tar.bz2
- find . -name "*~" -o -name ".#*" -o -name "TAGS" -o -name "*.old" | xargs rm -f
-
-check:
- $(MAKE) -C share/po check
- perl -I. -Mlang -e 'lang::check'
- perl -I. -Mkeyboard -e 'keyboard::check'
-
-localcopy: clean
- rm -rf standalone/pixmaps
- $(MAKE) -C ../tools clean
- cd .. ; rm -rf $(PACKAGE)-$(PKGVERSION) ; cp -af perl-install $(PACKAGE)-$(PKGVERSION) ; cp -af $(OTHERS) $(PACKAGE)-$(PKGVERSION)
- cd
- find ../$(PACKAGE)-$(PKGVERSION) -name '*.pm' | xargs perl -pi -e 's/\s*use\s+(diagnostics|vars|strict)//g'
- find ../$(PACKAGE)-$(PKGVERSION)/standalone -type f | xargs perl -pi -e 's/\s*use\s+(diagnostics|vars|strict)//g'
-
-
-$(DIRS):
- install -d auto
- $(MAKE) -C $@
-
-test_pms: verify_c
- for i in install2 install_steps_*.pm standalone/keyboarddrake standalone/XFdrake standalone/drakboot; do perl_checker -I. -no_cw -excludec -excludehelp -excluderesize_fat::c_rewritten -excludeMDK::Common::Globals -excludeCGI -excludestandalone -excludeurpm $$i; done
- for i in install2 install_steps_*.pm; do perl -cw -I. $$i; done
-
-verify_c:
- ./verify_c $(ALLPMS)
-
-%.mo: %.po
- msgfmt -o $@ $<
-
-install_pms: $(DIRS)
- for i in `perl -ne 's/sub (\w+?)_? {.*/$$1/ and print' commands.pm` sync; do ln -sf commands $(DEST)/usr/bin/$$i; done
-
- install -d $(DESTREP4PMS)
- for i in $(PMS); do \
- dest=$(DESTREP4PMS)/`dirname $$i`; \
- install -d $$dest; \
- perl -ne 'print' $$i > $(DESTREP4PMS)/$$i; \
- perl -pe 's/#[-+].*//; $$_ = "\n" if (/^=head/ .. /^=cut/) || /use (diagnostics|vars|strict)/' $$i > $(DESTREP4PMS)/$$i; \
- done
- if [ "x$(PERL_INSTALL_DEBUG)" == "x" ]; then \
- perl -pi -e 's|#!/usr/bin/perl -d.*\n|#!/usr/bin/perl\n|' $(DESTREP4PMS)/install2; \
- else \
- perl -pe 's|#!/usr/bin/perl.*\n|#!/usr/bin/perl -d \n|' install2 > $(DESTREP4PMS)/install2; \
- fi \
-
- rm -f $(DESTREP4PMS)/{bootlook,tinyfirewall}.pm
-
- cp share/*.rc $(DESTREP4PMS)
- chmod a+x $(DESTREP4PMS)/install2
- chmod a+x $(DESTREP4PMS)/commands
- chmod a+x $(DESTREP4PMS)/g_auto_install
- chmod a+x $(DESTREP4PMS)/live_install*
-
-get_needed_files: $(DIRS) $(MOFILES)
- $(MAKE) -C share
-
-# export PERL_INSTALL_TEST=1 ; strace -f -e trace=file -o '| grep -v "(No such file or directory)" | sed -e "s/[^\"]*\"//" -e "s/\".*//" | grep "^/" | grep -v -e "^/tmp" -e "^/home" -e "^/proc" -e "^/var" -e "^/dev" -e "^/etc" -e "^/usr/lib/rpm" > /tmp/list ' $(PERL) -d install2 < /dev/null
- eval `perl -V:version`; \
- cat share/list `../tools/specific_arch share/list` | \
- perl -pe "s/ARCH/$(ARCH)/g" | perl -pe "s/PERL_VERSION/$$version/g" > /tmp/list
-
- @missing=`perl -lne 'print if !-e $$_' /tmp/list`; [ -z "$$missing" ] || { echo "missing files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$missing" ; echo "missing files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-
- find auto -follow -name "*.so" >> /tmp/list
-
- for i in $(LOCALFILES) `cat /tmp/list` ; do \
- ldd $$i 2>/dev/null | grep "=>" | perl -pe 's/.*=> //; s/ .*//; s,^/lib/.*?/,/lib/,' | sort | uniq >> /tmp/list; \
- done
-
- perl -Mlang -I. -e 'print "$$_\n" foreach lang::console_font_files()' >> /tmp/list
-
- install -d $(DEST)/etc
- install -d $(DEST)/etc/sysconfig/network-scripts
- install -d $(DEST)/lib
- install -d $(DEST)/bin
- install -d $(DEST)/usr/bin
- install -d $(DEST)/usr/lib
- install -d $(DEST)/usr/share
- install -d $(DEST)/usr/share/gtk
- install -d $(DEST)/usr/share/xmodmap
- install -d $(DEST)/usr/X11R6/lib/X11
- install -d $(ROOTDEST)/Mandrake/base
- install -s $(LOCALFILES) $(DEST)/usr/bin
-# cp -f $(LOCALFILES2) $(DEST)/usr/bin
- ln -s ../X11R6/lib/X11 $(DEST)/usr/lib/X11
-ifeq (sparc,$(ARCH))
- cp -a /usr/X11R6/lib/X11/xkb $(DEST)/usr/X11R6/lib/X11
- rm -f $(DEST)/usr/X11R6/lib/X11/xkb/compiled
- ln -s /tmp $(DEST)/usr/X11R6/lib/X11/xkb/compiled
- ln -s /usr/X11R6/lib/X11/xkb/xkbcomp $(DEST)/usr/bin/xkbcomp
-endif
-ifeq (i386,$(ARCH))
- install -s /sbin/cardmgr $(DEST)/usr/bin
-endif
-
- for i in `cat /tmp/list`; do \
- if (echo $$i | grep -q "lib/[^/]*\.so"); then \
- install -s $$i $(DEST)/lib; \
- else \
- d=$$i; \
- (echo $$d | grep -q "^[^/]") && d="$(REP4PMS)/$$d"; \
- d=`echo $(DEST)/$$d | sed 's/\/usr\/local\//\/usr\//'`; \
- install -d `dirname $$d` && \
- if (echo $$i | grep -q "\.pm"); then \
- perl -pe '$$_ =~ /^__END__/ and exit(0);' $$i > $$d; \
- elif (echo $$i | grep -q "\.so"); then \
- install -s $$i $$d; \
- else \
- cp -f $$i $$d; \
- fi; \
- fi; \
- done
- mv -f $(DEST)/lib/libimlib-png.so $(DEST)/usr/lib
-
-# # transform xpm's in png's
- for i in $(DEST)/usr/share/icons/*.xpm; do convert $$i $${i%xpm}png; rm $$i; done
-
- mv -f $(DEST)/bin/* $(DEST)/sbin/* $(DEST)/usr/bin
- cd $(DEST)/usr/bin ; mv insmod insmod_
- rmdir $(DEST)/bin $(DEST)/sbin
-
- perl -ane 'symlink "$$F[1]", "$(DEST)/usr/bin/$$F[0]"' share/aliases
-
-ifeq (i386,$(ARCH))
- cp ../tools/i386/busybox $(DEST)/usr/bin
-endif
- ln -sf ash $(DEST)/usr/bin/sh
-
- for i in fonts keyboards locales keymaps; do tar xfj `../tools/specific_arch share/$$i.tar.bz2` -C $(DEST); done
-
- grep ChangeLog CVS/Entries > $(DEST)/usr/share/VERSION
-
- gzip -9f $(DEST)/usr/share/ldetect-lst/*
-
- cd share ; cp -a modparm.lst $(DEST)/usr/share
- cd share ; cp -a consolefonts $(DEST)/usr/share
- -cd share ; cp -f *.png *.xpm $(DEST)/usr/share
- -cd pixmaps ; cp -f *.png *.xpm $(DEST)/usr/share ; rm -f $(DEST)/usr/share/wiz_*
- cd share ; cp -a themes $(DEST)/usr/share/gtk
- cd share ; cp compssUsers compssUsers.* rpmsrate $(ROOTDEST)/Mandrake/base
-
- clean-rpmsrate $(ROOTDEST)/Mandrake/base/rpmsrate $(ROOTDEST)/Mandrake/RPMS*
-
- for i in ../kernel/modules.description ../kernel/all.modules/modules.cz*; do cp -f $$i $(DEST)/lib/; done
-
- $(MAKE) -C share/po install NAME=libDrakX LOCALEDIR=$(DEST)/usr/share/locale_special
-
-# echo -e '#!/bin/sh\n\nexec "/usr/bin/sh"' > $(DEST)/usr/bin/runinstall2
-# chmod a+x $(DEST)/usr/bin/runinstall2
-
-ifeq (i386,$(ARCH))
- cp -a /etc/pcmcia $(DEST)/etc
- ../tools/patch_pcmcia_config.pl $(DEST)/etc/pcmcia/config ../kernel/all.modules/`cat ../kernel/all.kernels/.main`/modules.dep
-endif
-
- find $(DEST) -name CVS | xargs rm -rf
-
-full_stage2:
- if [ `id -u` = 0 ]; then rm -rf $(DEST); else $(SUDO) rm -rf $(DEST); fi
- mkdir -p $(DEST)
- $(MAKE) get_needed_files
- $(MAKE) stage2
-
-stage2:
- $(MAKE) install_pms
- $(ROOTDEST)/misc/make_mdkinst_stage2 $(DEST) $(ROOTDEST)/Mandrake/base/mdkinst_stage2
-
-# rules to build a test rpm
-
-localrpm: localdist buildrpm
-
-localsrpm: localdist buildsrpm
-
-localdist: cleandist localcopy tar
-
-cleandist:
- rm -rf ../$(PACKAGE)-$(PKGVERSION) ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-tar:
- cd ../$(PACKAGE)-$(PKGVERSION) && perl -pi -e 's/^C_RPM.*/C_RPM=0/; s/^C_DRAKX.*/C_DRAKX=0/' c/Makefile
- cd ../$(PACKAGE)-$(PKGVERSION) && perl -pi -e 's/^all: help/all:/' share/po/Makefile
- cd ../$(PACKAGE)-$(PKGVERSION) && rm -rf install* pkgs.pm help.pm ftp.pm http.pm crypto.pm t.pm debug.log `find -name CVS`
- cd ../$(PACKAGE)-$(PKGVERSION) && mv -f Makefile.drakxtools Makefile
- cd ../$(PACKAGE)-$(PKGVERSION) && rm -f list_modules.pm && cp -f ../kernel/list_modules.pm .
- cd ..; tar cfj $(PACKAGE)-$(PKGVERSION).tar.bz2 $(patsubst %,$(PACKAGE)-$(PKGVERSION)/%,$(DISTFILES))
- cd ..; rm -rf $(PACKAGE)-$(PKGVERSION)
-
-buildrpm:
- rpm -ta ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-buildsrpm:
- rpm -ts ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-# rules to build a distributable rpm
-
-rpm: cvstag dist buildrpm
-
-srpm: cvstag dist buildsrpm
-
-dist: cleandist export tar
-
-export:
- cd ..; cvs export -d $(PACKAGE)-$(PKGVERSION) -r $(TAG) $(PACKAGE)
- cd ../$(PACKAGE)-$(PKGVERSION) && rm -rf $(OTHERDIRS) && set -x && for f in $(OTHERDIRS); do cvs -d `cat ../CVS/Root` export -r $(TAG) -d `basename $$f` gi/$$f; done
- cd ..; set -x && for f in $(OTHERFILES); do cvs -d `cat ../CVS/Root` export -r $(TAG) -d $(PACKAGE)-$(PKGVERSION) gi/$$f; done
-
-cvstag:
- cvs tag $(CVSTAGOPT) $(TAG)
- cd ..; cvs tag $(CVSTAGOPT) $(TAG) $(OTHERS)
diff --git a/perl-install/Makefile.config b/perl-install/Makefile.config
deleted file mode 100644
index 4c104d297..000000000
--- a/perl-install/Makefile.config
+++ /dev/null
@@ -1,23 +0,0 @@
-# -*- Makefile -*-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
-VERSION = 2.2.10-BOOT
-SUDO = sudo
-SO_FILES = c/blib/arch/auto/c/c.so
-PMS = *.pm Newt/*.pm c/stuff.pm resize_fat/*.pm sbus_probing/*.pm network/*.pm diskdrake/*.pm harddrake/*.pm commands install2 g_auto_install live_install live_install2 share/advertising/*.pl
-STANDALONEPMS_ = diskdrake XFdrake mousedrake printerdrake logdrake keyboarddrake draknet drakbackup drakfont drakproxy localedrake net_monitor drakbug_report tinyfirewall drakxconf drakxservices draksec drakboot adduserdrake drakgw drakautoinst livedrake lsnetdrake scannerdrake fileshareset drakxtv drakfloppy harddrake2 drakTermServ service_harddrake service_harddrake.sh drakbug
-STANDALONEPMS = $(STANDALONEPMS_:%=standalone/%)
-ALLPMS = $(PMS) $(STANDALONEPMS)
-REP4PMS = /usr/bin/perl-install
-ROOTDEST = /export
-DEST = $(ROOTDEST)/Mandrake/mdkinst
-STAGE2 = $(ROOTDEST)/Mandrake/base/mdkinst_stage2
-BASE = $(ROOTDEST)/Mandrake/base
-DESTREP4PMS = $(DEST)$(REP4PMS)
-PERL = perl
-LOCALFILES = $(patsubst %, ../tools/%,ddcprobe/ddcxinfos aewm-drakx/aewm-drakx serial_probe/serial_probe xhost+)
-DIRS = c Newt resize_fat #po
-CFLAGS = -Wall
-override CFLAGS += -pipe
-
diff --git a/perl-install/Makefile.drakxtools b/perl-install/Makefile.drakxtools
deleted file mode 100644
index 0801446f1..000000000
--- a/perl-install/Makefile.drakxtools
+++ /dev/null
@@ -1,61 +0,0 @@
-# -*- Makefile -*-
-include Makefile.config
-
-INLIBDEST_DIRS = Newt c resize_fat sbus_probing
-HAVEINST_DIRS = share/po standalone/interactive_http
-DIRS = $(INLIBDEST_DIRS) $(HAVEINST_DIRS) ddcprobe serial_probe harddrake
-NAME = libDrakX
-PREFIX =
-LIBDIR = $(PREFIX)/usr/lib
-DATADIR = $(PREFIX)/usr/share
-BINDEST = $(PREFIX)/usr/bin
-SBINDEST = $(PREFIX)/usr/sbin
-ETCDEST = $(PREFIX)/etc/gtk
-BINX11DEST = $(PREFIX)/usr/X11R6/bin
-LIBX11DEST = $(PREFIX)/usr/X11R6/lib/X11
-LIBDEST = $(LIBDIR)/$(NAME)
-PIXDIR = $(DATADIR)/$(NAME)/pixmaps
-INITDIR = $(PREFIX)/etc/rc.d/init.d
-.PHONY: $(DIRS)
-
-all: rpcinfo-flushed $(DIRS)
-
-$(DIRS):
- install -d auto
- rm -f share/po/DrakX.pot # force rebuild of po's
- [ ! -e $@/Makefile ] || $(MAKE) -C $@
-
-install:
- mkdir -p $(BINDEST) $(ETCDEST) $(SBINDEST) $(DATADIR)/{harddrake,pixmaps} $(LIBDEST)/{network,security,harddrake} $(BINX11DEST) $(LIBX11DEST) $(PIXDIR) $(INITDIR)
- install -d $(INLIBDEST_DIRS:%=$(LIBDEST)/%)
- install $(STANDALONEPMS) $(SBINDEST)
- install -s rpcinfo-flushed ddcprobe/ddcxinfos serial_probe/serial_probe $(SBINDEST)
- ln -s ../../$(patsubst $(PREFIX)/usr%,%,$(SBINDEST))/XFdrake $(BINX11DEST)/Xdrakres
- ln -s fileshareset $(SBINDEST)/filesharelist
- mv -f $(SBINDEST)/lsnetdrake $(BINDEST)/lsnetdrake
-
- install -m 644 *.pm $(LIBDEST)
- for i in network harddrake security; do install -m 644 $$i/*.pm $(LIBDEST)/$$i/;done
- install -m 644 pixmaps/* $(PIXDIR)
- install -m 644 share/diskdrake.rc $(DATADIR)/$(NAME)
-
- install -d $(PREFIX)/etc/security
- echo 'RESTRICT=yes' > $(PREFIX)/etc/security/fileshare.conf
-
- install -m 644 $(patsubst %,Newt/%.pm,Newt) $(LIBDEST)/Newt
- install -m 644 $(patsubst %,c/%.pm,stuff) $(LIBDEST)/c
- install -m 644 $(patsubst %,sbus_probing/%.pm,main) $(LIBDEST)/sbus_probing
- install -m 644 $(patsubst %,resize_fat/%.pm,main any boot_sector c_rewritten dir_entry directory fat info_sector io) $(LIBDEST)/resize_fat
-
- install -d $(LIBDEST)/diskdrake
- install -m 644 diskdrake/*.pm $(LIBDEST)/diskdrake
-
- for i in $(HAVEINST_DIRS); do \
- $(MAKE) -C $$i install PREFIX=$(PREFIX) DATADIR=$(DATADIR) NAME=$(NAME) ; \
- done
-
- find auto -follow -name .exists -o -name "*.bs" | xargs rm -f
- cp -rfL auto standalone/icons $(LIBDEST)
- mv $(LIBDEST)/icons/harddrake2/ $(DATADIR)/pixmaps/
- mv $(SBINDEST)/service_harddrake.sh $(INITDIR)/harddrake
- mv $(SBINDEST)/service_harddrake $(DATADIR)/harddrake/
diff --git a/perl-install/Newt/.cvsignore b/perl-install/Newt/.cvsignore
deleted file mode 100644
index c296b7faf..000000000
--- a/perl-install/Newt/.cvsignore
+++ /dev/null
@@ -1,6 +0,0 @@
-Newt.bs
-Newt.c
-pm_to_blib
-blib
-Makefile
-Makefile_c
diff --git a/perl-install/Newt/Av_CharPtrPtr.c b/perl-install/Newt/Av_CharPtrPtr.c
deleted file mode 100644
index f28fa6315..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.c
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include "Av_CharPtrPtr.h" /* XS_*_charPtrPtr() */
-#ifdef __cplusplus
-}
-#endif
-
-
-/* Used by the INPUT typemap for char**.
- * Will convert a Perl AV* (containing strings) to a C char**.
- */
-char **
-XS_unpack_charPtrPtr( rv )
-SV *rv;
-{
- AV *av;
- SV **ssv;
- char **s;
- int avlen;
- int x;
-
- if( SvROK( rv ) && (SvTYPE(SvRV(rv)) == SVt_PVAV) )
- av = (AV*)SvRV(rv);
- else {
- warn("XS_unpack_charPtrPtr: rv was not an AV ref");
- return( (char**)NULL );
- }
-
- /* is it empty? */
- avlen = av_len(av);
- if( avlen < 0 ){
- warn("XS_unpack_charPtrPtr: array was empty");
- return( (char**)NULL );
- }
-
- /* av_len+2 == number of strings, plus 1 for an end-of-array sentinel.
- */
- s = (char **)safemalloc( sizeof(char*) * (avlen + 2) );
- if( s == NULL ){
- warn("XS_unpack_charPtrPtr: unable to malloc char**");
- return( (char**)NULL );
- }
- for( x = 0; x <= avlen; ++x ){
- ssv = av_fetch( av, x, 0 );
- if( ssv != NULL ){
- if( SvPOK( *ssv ) ){
- s[x] = (char *)safemalloc( SvCUR(*ssv) + 1 );
- if( s[x] == NULL )
- warn("XS_unpack_charPtrPtr: unable to malloc char*");
- else
- strcpy( s[x], SvPV( *ssv, PL_na ) );
- }
- else
- warn("XS_unpack_charPtrPtr: array elem %d was not a string.", x );
- }
- else
- s[x] = (char*)NULL;
- }
- s[x] = (char*)NULL; /* sentinel */
- return( s );
-}
-
-/* Used by the OUTPUT typemap for char**.
- * Will convert a C char** to a Perl AV*.
- */
-void
-XS_pack_charPtrPtr( st, s )
-SV *st;
-char **s;
-{
- AV *av = newAV();
- SV *sv;
- char **c;
-
- for( c = s; *c != NULL; ++c ){
- sv = newSVpv( *c, 0 );
- av_push( av, sv );
- }
- sv = newSVrv( st, NULL ); /* upgrade stack SV to an RV */
- SvREFCNT_dec( sv ); /* discard */
- SvRV( st ) = (SV*)av; /* make stack RV point at our AV */
-}
-
-
-/* cleanup the temporary char** from XS_unpack_charPtrPtr */
-void
-XS_release_charPtrPtr(s)
-char **s;
-{
- char **c;
- for( c = s; *c != NULL; ++c )
- safefree( *c );
- safefree( s );
-}
-
diff --git a/perl-install/Newt/Av_CharPtrPtr.h b/perl-install/Newt/Av_CharPtrPtr.h
deleted file mode 100644
index 765f1a731..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.h
+++ /dev/null
@@ -1,4 +0,0 @@
-char ** XS_unpack_charPtrPtr _(( SV *rv ));
-void XS_pack_charPtrPtr _(( SV *st, char **s ));
-void XS_release_charPtrPtr _(( char **s ));
-
diff --git a/perl-install/Newt/Makefile b/perl-install/Newt/Makefile
deleted file mode 100644
index cb80c5ab7..000000000
--- a/perl-install/Newt/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-Newt: %: %.xs
- test -e Makefile_c || perl Makefile.PL
- $(MAKE) -f Makefile_c LD_RUN_PATH=
- rm -f ../auto/Newt ; ln -s ../Newt/blib/arch/auto/Newt ../auto
-
-clean:
- test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
- rm -f *~ *.o
diff --git a/perl-install/Newt/Makefile.PL b/perl-install/Newt/Makefile.PL
deleted file mode 100644
index 6378a8f31..000000000
--- a/perl-install/Newt/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
- 'NAME' => 'Newt',
- 'OBJECT' => 'Av_CharPtrPtr.o Newt.o',
- 'MAKEFILE' => 'Makefile_c',
- 'OPTIMIZE' => '-Os',
- 'VERSION_FROM' => 'Newt.pm', # finds $VERSION
- 'LIBS' => ['-lnewt -lslang'],
- 'DEFINE' => '', # e.g., '-DHAVE_SOMETHING'
-);
diff --git a/perl-install/Newt/Newt.pm b/perl-install/Newt/Newt.pm
deleted file mode 100644
index fdf9c0232..000000000
--- a/perl-install/Newt/Newt.pm
+++ /dev/null
@@ -1,16 +0,0 @@
-package Newt; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-use DynaLoader;
-
-use vars qw($VERSION @ISA);
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-bootstrap Newt $VERSION;
-
-package Newt::Component; # $Id$
-package Newt::Grid; # $Id$
-
-
-1;
diff --git a/perl-install/Newt/Newt.xs b/perl-install/Newt/Newt.xs
deleted file mode 100644
index fba7c5455..000000000
--- a/perl-install/Newt/Newt.xs
+++ /dev/null
@@ -1,478 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include <newt.h>
-
-static void suspend() {
- newtSuspend();
- raise(SIGTSTP);
- newtResume();
-}
-
-static void componentCallback(newtComponent co, void *data) {
- dSP;
- PUSHMARK(SP);
- perl_call_sv((SV *) data, G_DISCARD);
-}
-
-
-typedef newtComponent Newt__Component;
-typedef newtGrid Newt__Grid;
-
-
-MODULE = Newt PACKAGE = Newt PREFIX = newt
-
-void
-DESTROY()
- CODE:
- {
- newtFinished();
- }
-
-int
-newtInit()
-
-int
-newtFinished()
-
-void
-newtCls()
-
-void
-newtSuspend()
-
-void
-newtResume()
-
-int
-newtCenteredWindow(width,height,title)
- int width;
- int height;
- const char * title;
-
-void
-newtPopWindow()
-
-void
-newtRefresh()
-
-void
-newtPushHelpLine(text)
- const char * text;
-
-void
-newtDrawRootText(row,col,text)
- int row;
- int col;
- const char * text;
-
-void
-newtGetScreenSize()
- PPCODE:
-{
- int cols, rows;
- newtGetScreenSize(&cols, &rows);
- PUSHs(sv_2mortal(newSViv(cols)));
- PUSHs(sv_2mortal(newSViv(rows)));
-}
-
-void
-newtSetSuspendCallback()
- CODE:
- {
- newtSetSuspendCallback(suspend, NULL);
- }
-
-
-void
-newtWinMessage(title,buttonText,text)
- char * title;
- char * buttonText;
- char * text;
-
-int
-newtWinChoice(title,button1,button2,text)
- char * title;
- char * button1;
- char * button2;
- char * text;
-
-int
-newtWinTernary(title,button1,button2,button3,message)
- char * title;
- char * button1;
- char * button2;
- char * button3;
- char * message;
-
-void
-newtWinMenu(title,text,suggestedWidth,flexDown,flexUp,maxListHeight,list,def,buttons, ...)
- char * title;
- char * text;
- int suggestedWidth;
- int flexDown;
- int flexUp;
- int maxListHeight;
- char **list;
- int def;
- char *buttons;
- PPCODE:
- {
- int button;
-#define nb 8
-#define a(i) SvPV(ST(i + nb),PL_na)
- button = newtWinMenu(title, text, suggestedWidth, flexDown, flexUp, maxListHeight, list, &def,
- items > nb + 0 ? a( 0) : NULL,
- items > nb + 1 ? a( 1) : NULL,
- items > nb + 2 ? a( 2) : NULL,
- items > nb + 3 ? a( 3) : NULL,
- items > nb + 4 ? a( 4) : NULL,
- items > nb + 5 ? a( 5) : NULL,
- items > nb + 6 ? a( 6) : NULL,
- items > nb + 7 ? a( 7) : NULL,
- items > nb + 8 ? a( 8) : NULL,
- items > nb + 9 ? a( 9) : NULL,
- items > nb + 10 ? a(10) : NULL,
- NULL);
-#undef a
- EXTEND(SP, 2);
- PUSHs(sv_2mortal(newSViv(button)));
- PUSHs(sv_2mortal(newSViv(def)));
- }
-
-MODULE = Newt PACKAGE = Newt::Component PREFIX = newt
-
-void
-addCallback(co, callback)
- Newt::Component co;
- SV *callback;
- CODE:
- newtComponentAddCallback(co, componentCallback, callback);
-
-Newt::Component
-newtCompactButton(left,top,text)
- int left;
- int top;
- const char * text;
-
-Newt::Component
-newtButton(left,top,text)
- int left;
- int top;
- const char * text;
-
-Newt::Component
-newtCheckbox(left,top,text,defValue,seq)
- int left;
- int top;
- const char * text;
- char *defValue;
- const char * seq;
- CODE:
- RETVAL = newtCheckbox(left, top, text, defValue[0], seq, NULL);
- OUTPUT:
- RETVAL
-
-int
-newtCheckboxGetValue(co)
- Newt::Component co;
-
-void
-newtCheckboxSetValue(co, value)
- Newt::Component co;
- char *value;
- CODE:
- newtCheckboxSetValue(co, value[0]);
-
-Newt::Component
-newtLabel(left,top,text)
- int left;
- int top;
- const char * text;
-
-void
-newtLabelSetText(co,text)
- Newt::Component co;
- const char * text;
-
-Newt::Component
-newtVerticalScrollbar(left,top,height,normalColorset,thumbColorset)
- int left;
- int top;
- int height;
- int normalColorset;
- int thumbColorset;
-
-void
-newtScrollbarSet(co,where,total)
- Newt::Component co;
- int where;
- int total;
-
-Newt::Component
-newtListbox(left,top,height,flags)
- int left;
- int top;
- int height;
- int flags;
-
-SV *
-newtListboxGetCurrent(co)
- Newt::Component co;
-CODE:
- RETVAL = SvREFCNT_inc(newtListboxGetCurrent(co));
-OUTPUT:
- RETVAL
-
-
-void
-newtListboxSetCurrent(co,indice)
- Newt::Component co;
- int indice;
-
-void
-newtListboxSetWidth(co,width)
- Newt::Component co;
- int width;
-
-int
-newtListboxAddEntry(co,text,data)
- Newt::Component co;
- const char * text;
- SV * data;
-CODE:
- RETVAL = newtListboxAddEntry(co, text, data);
-OUTPUT:
- RETVAL
-
-Newt::Component
-newtTextboxReflowed(left,top,text,width,flexDown,flexUp,flags)
- int left;
- int top;
- char * text;
- int width;
- int flexDown;
- int flexUp;
- int flags;
-
-Newt::Component
-newtTextbox(left,top,width,height,flags)
- int left;
- int top;
- int width;
- int height;
- int flags;
-
-void
-newtTextboxSetText(co,text)
- Newt::Component co;
- const char * text;
-
-void
-newtTextboxSetHeight(co,height)
- Newt::Component co;
- int height;
-
-int
-newtTextboxGetNumLines(co)
- Newt::Component co;
-
-char *
-newtReflowText(text,width,flexDown,flexUp,actualWidth,actualHeight)
- char * text;
- int width;
- int flexDown;
- int flexUp;
- int * actualWidth;
- int * actualHeight;
-
-Newt::Component
-newtForm(vertBar,help,flags)
- Newt::Component vertBar;
- const char * help;
- int flags;
-
-void
-newtFormSetSize(co)
- Newt::Component co;
-
-Newt::Component
-newtFormGetCurrent(co)
- Newt::Component co;
-
-void
-newtFormSetBackground(co,color)
- Newt::Component co;
- int color;
-
-void
-newtFormSetCurrent(co,subco)
- Newt::Component co;
- Newt::Component subco;
-
-void
-newtFormAddComponent(form,co)
- Newt::Component form;
- Newt::Component co;
-
-void
-newtFormAddGrid(form,grid,recurse)
- Newt::Component form;
- Newt::Grid grid;
- int recurse;
- CODE:
- newtGridAddComponentsToForm(grid,form,recurse);
-
-void
-newtFormSetHeight(co,height)
- Newt::Component co;
- int height;
-
-void
-newtFormSetWidth(co,width)
- Newt::Component co;
- int width;
-
-Newt::Component
-newtRunForm(form)
- Newt::Component form;
-
-void
-newtDrawForm(form)
- Newt::Component form;
-
-Newt::Component
-newtEntry(left,top,initialValue,width,flag)
- int left;
- int top;
- const char * initialValue;
- int width;
- int flag;
- CODE:
- {
- char *result;
- RETVAL = newtEntry(left,top,initialValue,width,&result,flag);
- }
- OUTPUT:
- RETVAL
-
-void
-newtEntrySet(co,value,cursorAtEnd)
- Newt::Component co;
- const char * value;
- int cursorAtEnd;
-
-char *
-newtEntryGetValue(co)
- Newt::Component co;
-
-void
-newtFormDestroy(form)
- Newt::Component form;
-
-MODULE = Newt PACKAGE = Newt::Grid PREFIX = newt
-
-Newt::Grid
-newtCreateGrid(cols,rows)
- int cols;
- int rows;
-
-Newt::Grid
-HCloseStacked(first, ...)
- Newt::Component first;
- CODE:
- {
- int i;
- newtComponent *p = alloca(sizeof(newtComponent) * (2 * items + 1));
- for (i = 0; i < items; i++) {
- p[2 * i] = 1;
- p[2 * i + 1] = (newtComponent)SvIV((SV*)SvRV( ST(i) ));
- }
- p[2 * items] = NULL;
- RETVAL = ((newtGrid (*)()) newtGridHCloseStacked)();
- }
-OUTPUT:
-RETVAL
-
-
-Newt::Grid
-newtGridBasicWindow(text,middle,buttons)
- Newt::Component text;
- Newt::Grid middle;
- Newt::Grid buttons;
-
-
-Newt::Grid
-newtGridSimpleWindow(text,middle,buttons)
- Newt::Component text;
- Newt::Component middle;
- Newt::Grid buttons;
-
-void
-newtGridSetField(grid,col,row,type,val,padLeft,padTop,padRight,padBottom,anchor,flags)
- Newt::Grid grid;
- int col;
- int row;
- enum newtGridElement type;
- void * val;
- int padLeft;
- int padTop;
- int padRight;
- int padBottom;
- int anchor;
- int flags;
-
-
-void
-newtGridFree(grid,recurse)
- Newt::Grid grid;
- int recurse;
-
-void
-newtGridPlace(grid,left,top)
- Newt::Grid grid;
- int left;
- int top;
-
-void
-newtGridGetSize(grid)
- Newt::Grid grid;
- PPCODE:
-{
- int width;
- int height;
- newtGridGetSize(grid, &width, &height);
- PUSHs(sv_2mortal(newSViv(width)));
- PUSHs(sv_2mortal(newSViv(height)));
-}
-
-void
-newtGridWrappedWindow(grid,title)
- Newt::Grid grid;
- char * title;
-
-Newt::Grid
-newtButtonBar(button1, ...)
- char * button1;
- PPCODE:
- {
- static newtComponent p[11];
- int i;
- EXTEND(SP, items + 1);
-#define a(i) (char *)SvPV(ST(i),PL_na)
- PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Grid",
- newtButtonBar(items > 0 ? a( 0) : NULL, items > 0 ? &p[ 0] : NULL,
- items > 1 ? a( 1) : NULL, items > 1 ? &p[ 1] : NULL,
- items > 2 ? a( 2) : NULL, items > 2 ? &p[ 2] : NULL,
- items > 3 ? a( 3) : NULL, items > 3 ? &p[ 3] : NULL,
- items > 4 ? a( 4) : NULL, items > 4 ? &p[ 4] : NULL,
- items > 5 ? a( 5) : NULL, items > 5 ? &p[ 5] : NULL,
- items > 6 ? a( 6) : NULL, items > 6 ? &p[ 6] : NULL,
- items > 7 ? a( 7) : NULL, items > 7 ? &p[ 7] : NULL,
- items > 8 ? a( 8) : NULL, items > 8 ? &p[ 8] : NULL,
- items > 9 ? a( 9) : NULL, items > 9 ? &p[ 9] : NULL,
- items > 10 ? a(10) : NULL, items > 10 ? &p[10] : NULL,
- NULL)));
-#undef a
- for (i = 0; i < items; i++) PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Component", p[i]));
- }
diff --git a/perl-install/Newt/typemap b/perl-install/Newt/typemap
deleted file mode 100644
index 5aaa2f668..000000000
--- a/perl-install/Newt/typemap
+++ /dev/null
@@ -1,25 +0,0 @@
-TYPEMAP
-
-const char * T_PV
-const void * T_PV
-int * T_PV
-void ** T_PACKED
-
-enum newtFlagsSense T_IV
-enum newtGridElement T_IV
-SV ** T_SV
-
-Newt::Component NewtComponent
-Newt::Grid NewtGrid
-
-INPUT
-NewtComponent
- $var = ($type) SvIV((SV*)SvRV($arg))
-NewtGrid
- $var = ($type) SvIV((SV*)SvRV($arg))
-
-OUTPUT
-NewtComponent
- sv_setref_pv($arg, "Newt::Component", (void*) $var);
-NewtGrid
- sv_setref_pv($arg, "Newt::Grid", (void*) $var);
diff --git a/perl-install/any.pm b/perl-install/any.pm
deleted file mode 100644
index 2e97c9bc5..000000000
--- a/perl-install/any.pm
+++ /dev/null
@@ -1,1188 +0,0 @@
-package any; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use partition_table qw(:types);
-use fsedit;
-use fs;
-use lang;
-use run_program;
-use modules;
-use log;
-use c;
-
-sub drakx_version {
- sprintf "DrakX v%s built %s", $::testing ? ('TEST', scalar gmtime()) : (split('/', cat_("$ENV{SHARE_PATH}/VERSION")))[2,3];
-}
-
-sub facesdir {
- my ($prefix) = @_;
- "$prefix/usr/share/mdk/faces/";
-}
-sub face2png {
- my ($face, $prefix) = @_;
- facesdir($prefix) . $face . ".png";
-}
-sub facesnames {
- my ($prefix) = @_;
- my $dir = facesdir($prefix);
- my @l = grep { /^[A-Z]/ } all($dir);
- map { if_(/(.*)\.png/, $1) } (@l ? @l : all($dir));
-}
-
-sub addKdmIcon {
- my ($prefix, $user, $icon) = @_;
- my $dest = "$prefix/usr/share/faces/$user.png";
- eval { cp_af(facesdir($prefix) . $icon . ".png", $dest) } if $icon;
-}
-
-sub allocUsers {
- my ($prefix, $users) = @_;
- my @m = my @l = facesnames($prefix);
- foreach (grep { !$_->{icon} || $_->{icon} eq "automagic" } @$users) {
- $_->{auto_icon} = splice(@m, rand(@m), 1); #- known biased (see cookbook for better)
- log::l("auto_icon is $_->{auto_icon}");
- @m = @l unless @m;
- }
-}
-
-sub addUsers {
- my ($prefix, $users) = @_;
- my $msec = "$prefix/etc/security/msec";
-
- allocUsers($prefix, $users);
- foreach my $u (@$users) {
- run_program::rooted($prefix, "usermod", "-G", join(",", @{$u->{groups}}), $u->{name}) if !is_empty_array_ref($u->{groups});
- addKdmIcon($prefix, $u->{name}, delete $u->{auto_icon} || $u->{icon});
- }
-}
-
-sub crypt {
- my ($password, $md5) = @_;
- crypt($password, $md5 ? '$1$' . salt(8) : salt(2));
-}
-sub enableShadow {
- my ($prefix) = @_;
- run_program::rooted($prefix, "pwconv") or log::l("pwconv failed");
- run_program::rooted($prefix, "grpconv") or log::l("grpconv failed");
-}
-sub enableMD5Shadow { #- NO MORE USED
- my ($prefix, $shadow, $md5) = @_;
- substInFile {
- if (/^password.*pam_pwdb.so/) {
- s/\s*shadow//; s/\s*md5//;
- s/$/ shadow/ if $shadow;
- s/$/ md5/ if $md5;
- }
- } grep { -r $_ } map { "$prefix/etc/pam.d/$_" } qw(login rlogin passwd);
-}
-
-sub grub_installed {
- my ($in) = @_;
- my $f = "/usr/sbin/grub";
- $in->do_pkgs->install('grub') if !-e $f;
- -e $f;
-}
-
-sub setupBootloader {
- my ($in, $b, $all_hds, $fstab, $security, $prefix, $more) = @_;
- my $hds = $all_hds->{hds};
-
- $more++ if $b->{bootUnsafe};
- my $automatic = !$::expert && $more < 1;
- my $semi_auto = !$::expert && arch() !~ /ia64/;
- my $ask_per_entries = $::expert || $more > 1;
- my $prev_boot = $b->{boot};
- my $mixed_kind_of_disks =
- (grep { $_->{device} =~ /^sd/ } @$hds) && (grep { $_->{device} =~ /^hd/ } @$hds) ||
- (grep { $_->{device} =~ /^hd[fghi]/ } @$hds) && (grep { $_->{device} =~ /^hd[abcd]/ } @$hds);
-
- if ($mixed_kind_of_disks) {
- $automatic = $semi_auto = 0;
- #- full expert questions when there is 2 kind of disks
- #- it would need a semi_auto asking on which drive the bios boots...
- }
- $automatic = 0 if arch() =~ /ppc/; #- no auto for PPC yet
-
- if ($automatic) {
- #- automatic
- } elsif ($semi_auto) {
- my @l = (__("First sector of drive (MBR)"), __("First sector of boot partition"));
-
- $in->set_help('setupBootloaderBeginner') unless $::isStandalone;
- if (arch() =~ /sparc/) {
- $b->{use_partition} = $in->ask_from_list_(_("SILO Installation"),
- _("Where do you want to install the bootloader?"),
- \@l, $l[$b->{use_partition}]) or return 0;
- } elsif (arch() =~ /ppc/) {
- if (defined $partition_table_mac::bootstrap_part) {
- $b->{boot} = $partition_table_mac::bootstrap_part;
- log::l("set bootstrap to $b->{boot}");
- } else {
- die "no bootstrap partition - yaboot.conf creation failed";
- }
- } else {
- my $boot = $hds->[0]{device};
- my $onmbr = "/dev/$boot" eq $b->{boot};
- $b->{boot} = "/dev/" . ($in->ask_from_list_(_("LILO/grub Installation"),
- _("Where do you want to install the bootloader?"),
- \@l, $l[!$onmbr]) eq $l[0]
- ? $boot : fsedit::get_root($fstab, 'boot')->{device});
- }
- } else {
- $in->set_help(arch() =~ /sparc/ ? "setupSILOGeneral" : arch() =~ /ppc/ ? 'setupYabootGeneral' :"setupBootloader") unless $::isStandalone; #- TO MERGE ?
-
- my @silo_install_lang = (_("First sector of drive (MBR)"), _("First sector of boot partition"));
- my $silo_install_lang = $silo_install_lang[$b->{use_partition}];
-
- my %bootloaders = (if_(exists $b->{methods}{silo},
- __("SILO") => sub { $b->{methods}{silo} = 1 }),
- if_(exists $b->{methods}{lilo},
- __("LILO with text menu") => sub { $b->{methods}{lilo} = "lilo-menu" },
- __("LILO with graphical menu") => sub { $b->{methods}{lilo} = "lilo-graphic" }),
- if_(exists $b->{methods}{grub},
- #- put lilo if grub is chosen, so that /etc/lilo.conf is generated
- __("Grub") => sub { $b->{methods}{grub} = 1;
- exists $b->{methods}{lilo}
- and $b->{methods}{lilo} = "lilo-menu" }),
- if_(exists $b->{methods}{loadlin},
- __("Boot from DOS/Windows (loadlin)") => sub { $b->{methods}{loadlin} = 1 }),
- if_(exists $b->{methods}{yaboot},
- __("Yaboot") => sub { $b->{methods}{yaboot} = 1 }),
- );
- my $bootloader = arch() =~ /sparc/ ? __("SILO") : arch() =~ /ppc/ ? __("Yaboot") : __("LILO with graphical menu");
- my $profiles = bootloader::has_profiles($b);
- my $memsize = bootloader::get_append($b, 'mem');
- my $prev_clean_tmp = my $clean_tmp = grep { $_->{mntpoint} eq '/tmp' } @{$all_hds->{special} ||= []};
-
- $b->{vga} ||= 'normal';
- if (arch() !~ /ppc/) {
- $in->ask_from('', _("Bootloader main options"), [
-{ label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },
- arch() =~ /sparc/ ? (
-{ label => _("Bootloader installation"), val => \$silo_install_lang, list => \@silo_install_lang },
-) : if_(arch() !~ /ia64/,
-{ label => _("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (@$hds, grep { !isFat($_) } @$fstab)), detect_devices::floppies_dev() ], not_edit => !$::expert },
-{ label => _("LBA (doesn't work on old BIOSes)"), val => \$b->{lba32}, type => "bool", text => "lba", advanced => 1 },
-{ label => _("Compact"), val => \$b->{compact}, type => "bool", text => _("compact"), advanced => 1 },
-{ label => _("Video mode"), val => \$b->{vga}, list => [ keys %bootloader::vga_modes ], not_edit => !$::expert, format => sub { $bootloader::vga_modes{$_[0]} }, advanced => 1 },
-),
-{ label => _("Delay before booting default image"), val => \$b->{timeout} },
- if_($security >= 4,
-{ label => _("Password"), val => \$b->{password}, hidden => 1 },
-{ label => _("Password (again)"), val => \$b->{password2}, hidden => 1 },
-{ label => _("Restrict command line options"), val => \$b->{restricted}, type => "bool", text => _("restrict") },
- ),
-{ label => _("Clean /tmp at each boot"), val => \$clean_tmp, type => 'bool', advanced => 1 },
-{ label => _("Precise RAM size if needed (found %d MB)", availableRamMB()), val => \$memsize, advanced => 1 },
- if_(detect_devices::isLaptop,
-{ label => _("Enable multi profiles"), val => \$profiles, type => 'bool', advanced => 1 },
- ),
-],
- complete => sub {
- !$memsize || $memsize =~ /K$/ || $memsize =~ s/^(\d+)M?$/$1M/i or $in->ask_warn('', _("Give the ram size in MB")), return 1;
-#- $security > 4 && length($b->{password}) < 6 and $in->ask_warn('', _("At this level of security, a password (and a good one) in lilo is requested")), return 1;
- $b->{restricted} && !$b->{password} and $in->ask_warn('', _("Option ``Restrict command line options'' is of no use without a password")), return 1;
- $b->{password} eq $b->{password2} or !$b->{restricted} or $in->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return 1;
- 0;
- }
- ) or return 0;
- } else {
- $b->{boot} = $partition_table_mac::bootstrap_part;
- $in->ask_from('', _("Bootloader main options"), [
- { label => _("Bootloader to use"), val => \$bootloader, list => [ keys(%bootloaders) ], format => \&translate },
- { label => _("Init Message"), val => \$b->{'init-message'} },
- { label => _("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (grep { isAppleBootstrap($_) } @$fstab))], not_edit => !$::expert },
- { label => _("Open Firmware Delay"), val => \$b->{delay} },
- { label => _("Kernel Boot Timeout"), val => \$b->{timeout} },
- { label => _("Enable CD Boot?"), val => \$b->{enablecdboot}, type => "bool" },
- { label => _("Enable OF Boot?"), val => \$b->{enableofboot}, type => "bool" },
- { label => _("Default OS?"), val=> \$b->{defaultos}, list => [ 'linux', 'macos', 'macosx', 'darwin' ] },
- ]) or return 0;
- }
-
- $b->{methods}{$_} = 0 foreach keys %{$b->{methods}};
- $bootloaders{$bootloader} and $bootloaders{$bootloader}->();
-
- grub_installed($in) or return 1 if $b->{methods}{grub};
-
- #- at least one method
- grep_each { $::b } %{$b->{methods}} or return 0;
-
- $b->{use_partition} = $silo_install_lang eq _("First sector of drive (MBR)") ? 0 : 1;
-
- bootloader::set_profiles($b, $profiles);
- bootloader::add_append($b, "mem", $memsize);
-
- if ($prev_clean_tmp != $clean_tmp) {
- if ($clean_tmp) {
- push @{$all_hds->{special}}, { device => 'none', mntpoint => '/tmp', type => 'tmpfs' };
- } else {
- @{$all_hds->{special}} = grep { $_->{mntpoint} eq '/tmp' } @{$all_hds->{special}};
- }
- }
- }
-
- #- remove bios mapping if the user changed the boot device
- delete $b->{bios} if $b->{boot} ne $prev_boot;
-
- if ($mixed_kind_of_disks &&
-# $b->{boot} !~ /$hds->[0]{device}/ && #- not the first disk
- $b->{boot} =~ /\d$/ && #- on a partition
- is_empty_hash_ref($b->{bios}) && #- some bios mapping already there
- arch() !~ /ppc/) {
- my $hd = $in->ask_from_listf('', _("You decided to install the bootloader on a partition.
-This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
-
-On which drive are you booting?"), \&partition_table::description, $hds) or goto &setupBootloader;
- $b->{first_hd_device} = "/dev/$hd->{device}";
- }
-
- $ask_per_entries or return 1;
-
- while (1) {
- $in->set_help(arch() =~ /sparc/ ? 'setupSILOAddEntry' : arch() =~ /ppc/ ? 'setupYabootAddEntry' : 'setupBootloaderAddEntry') unless $::isStandalone;
- my ($c, $e);
- $in->ask_from_(
- {
- messages =>
-_("Here are the entries on your boot menu so far.
-You can add some more or change the existing ones."),
- ok => '',
-},
- [ { val => \$e, type => 'combo', format => sub {
- my ($e) = @_;
- ref $e ?
- "$e->{label} ($e->{kernel_or_dev})" . ($b->{default} eq $e->{label} && " *") :
- translate($e);
- }, list => [ @{$b->{entries}} ], allow_empty_list => 1 },
- (map { my $s = $_; { val => translate($_), clicked_may_quit => sub { $c = $s; 1 } } } (if_(@{$b->{entries}} > 0, __("Modify")), __("Add"), __("Done"))),
- ]
- );
- !$c || $c eq "Done" and last;
-
- if ($c eq "Add") {
- my @labels = map { $_->{label} } @{$b->{entries}};
- my $prefix;
- if ($in->ask_from_list_('', _("Which type of entry do you want to add?"),
- [ __("Linux"), arch() =~ /sparc/ ? __("Other OS (SunOS...)") : arch() =~ /ppc/ ?
- __("Other OS (MacOS...)") : __("Other OS (windows...)") ]
- ) eq "Linux") {
- $e = { type => 'image',
- root => '/dev/' . fsedit::get_root($fstab)->{device}, #- assume a good default.
- };
- $prefix = "linux";
- } else {
- $e = { type => 'other' };
- $prefix = arch() =~ /sparc/ ? "sunos" : arch() =~ /ppc/ ? "macos" : "windows";;
- }
- $e->{label} = $prefix;
- for (my $nb = 0; member($e->{label}, @labels); $nb++) { $e->{label} = "$prefix-$nb" }
- }
- my %old_e = %$e;
- my $default = my $old_default = $e->{label} eq $b->{default};
-
- my @l;
- if ($e->{type} eq "image") {
- @l = (
-{ label => _("Image"), val => \$e->{kernel_or_dev}, list => [ map { s/$prefix//; $_ } glob_("$prefix/boot/vmlinuz*") ], not_edit => 0 },
-{ label => _("Root"), val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
-{ label => _("Append"), val => \$e->{append} },
- if_(arch !~ /ppc|ia64/,
-{ label => _("Video mode"), val => \$e->{vga}, list => [ keys %bootloader::vga_modes ], format => sub { $bootloader::vga_modes{$_[0]} }, not_edit => !$::expert },
-),
-{ label => _("Initrd"), val => \$e->{initrd}, list => [ map { s/$prefix//; $_ } glob_("$prefix/boot/initrd*") ], not_edit => 0 },
-{ label => _("Read-write"), val => \$e->{'read-write'}, type => 'bool' }
- );
- @l = @l[0..2] unless $::expert;
- } else {
- @l = (
-{ label => _("Root"), val => \$e->{kernel_or_dev}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
-if_(arch() !~ /sparc|ppc|ia64/,
-{ label => _("Table"), val => \$e->{table}, list => [ '', map { "/dev/$_->{device}" } @$hds ], not_edit => !$::expert },
-{ label => _("Unsafe"), val => \$e->{unsafe}, type => 'bool' }
-),
- );
- @l = $l[0] unless $::expert;
- }
-if (arch() !~ /ppc/) {
- @l = (
-{ label => _("Label"), val => \$e->{label} },
-@l,
-{ label => _("Default"), val => \$default, type => 'bool' },
- );
-} else {
- @l = ({ label => _("Label"), val => \$e->{label}, list=> ['macos', 'macosx', 'darwin'] },
- @l );
- if ($e->{type} eq "image") {
- @l = ({ label => _("Label"), val => \$e->{label} },
- $::expert ? @l[1..4] : (@l[1..2], { label => _("Append"), val => \$e->{append} }) ,
- if_($::expert, { label => _("Initrd-size"), val => \$e->{initrdsize}, list => [ '', '4096', '8192', '16384', '24576' ] }),
- if_($::expert, $l[5]),
- { label => _("NoVideo"), val => \$e->{novideo}, type => 'bool' },
- { label => _("Default"), val => \$default, type => 'bool' }
- );
- }
-}
-
- if ($in->ask_from_(
- {
- if_($c ne "Add", cancel => _("Remove entry")),
- callbacks => {
- complete => sub {
- $e->{label} or $in->ask_warn('', _("Empty label not allowed")), return 1;
- $e->{kernel_or_dev} or $in->ask_warn('', $e->{type} eq 'image' ? _("You must specify a kernel image") : _("You must specify a root partition")), return 1;
- member(lc $e->{label}, map { lc $_->{label} } grep { $_ != $e } @{$b->{entries}}) and $in->ask_warn('', _("This label is already used")), return 1;
- 0;
- } } }, \@l)) {
- $b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
- require bootloader;
- bootloader::configure_entry($prefix, $e); #- hack to make sure initrd file are built.
-
- push @{$b->{entries}}, $e if $c eq "Add";
- } else {
- delete $b->{default} if $b->{default} eq $e->{label};
- @{$b->{entries}} = grep { $_ != $e } @{$b->{entries}};
- }
- }
- 1;
-}
-
-my @etc_pass_fields = qw(name pw uid gid realname home shell);
-sub unpack_passwd {
- my ($l) = @_;
- my %l; @l{@etc_pass_fields} = split ':', chomp_($l);
- \%l;
-}
-sub pack_passwd {
- my ($l) = @_;
- join(':', @$l{@etc_pass_fields}) . "\n";
-}
-
-sub get_autologin {
- my ($prefix, $o) = @_;
- my %l = getVarsFromSh("$prefix/etc/sysconfig/autologin");
- $o->{autologin} ||= $l{USER};
- %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
- $o->{desktop} ||= $l{DESKTOP};
-}
-
-sub set_autologin {
- my ($prefix, $user, $desktop) = @_;
-
- if ($user) {
- my %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
- $l{DESKTOP} = $desktop;
- setVarsInSh("$prefix/etc/sysconfig/desktop", \%l);
- log::l("cat $prefix/etc/sysconfig/desktop ($desktop):\n", cat_("$prefix/etc/sysconfig/desktop"));
- }
- setVarsInSh("$prefix/etc/sysconfig/autologin",
- { USER => $user, AUTOLOGIN => bool2yesno($user), EXEC => "/usr/X11R6/bin/startx" });
- log::l("cat $prefix/etc/sysconfig/autologin ($user):\n", cat_("$prefix/etc/sysconfig/autologin"));
-}
-
-sub rotate_log {
- my ($f) = @_;
- if (-e $f) {
- my $i = 1;
- for (; -e "$f$i" || -e "$f$i.gz"; $i++) {}
- rename $f, "$f$i";
- }
-}
-sub rotate_logs {
- my ($prefix) = @_;
- rotate_log("$prefix/root/drakx/$_") foreach qw(ddebug.log install.log);
-}
-
-sub writeandclean_ldsoconf {
- my ($prefix) = @_;
- my $file = "$prefix/etc/ld.so.conf";
- output $file,
- grep { !m|^(/usr)?/lib$| } #- no need to have /lib and /usr/lib in ld.so.conf
- uniq cat_($file), "/usr/X11R6/lib\n";
-}
-
-sub shells {
- my ($prefix) = @_;
- grep { -x "$prefix$_" } chomp_(cat_("$prefix/etc/shells"));
-}
-
-sub inspect {
- my ($part, $prefix, $rw) = @_;
-
- isMountableRW($part) or return;
-
- my $dir = $::isInstall ? "/tmp/inspect_tmp_dir" : "/root/.inspect_tmp_dir";
-
- if ($part->{isMounted}) {
- $dir = ($prefix || '') . $part->{mntpoint};
- } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
- $dir = '';
- } else {
- mkdir $dir, 0700;
- eval { fs::mount($part->{device}, $dir, type2fs($part), !$rw) };
- $@ and return;
- }
- my $h = before_leaving {
- if (!$part->{isMounted} && $dir) {
- fs::umount($dir);
- unlink($dir)
- }
- };
- $h->{dir} = $dir;
- $h;
-}
-
-#-----modem conf
-sub pppConfig {
- my ($in, $modem, $prefix) = @_;
- $modem or return;
-
- if ($modem->{device} ne "/dev/modem") {
- devfssymlinkf($modem->{device}, 'modem', $prefix) or log::l("creation of $prefix/dev/modem failed")
- }
- $in->do_pkgs->install('ppp') if !$::testing;
-
- my %toreplace;
- $toreplace{$_} = $modem->{$_} foreach qw(connection phone login passwd auth domain dns1 dns2);
- $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, }}{$modem->{auth}};
- $toreplace{kpppauth} = ${{ 'Script-based' => 0, 'PAP' => 1, 'Terminal-based' => 2, 'CHAP' => 3 }}{$modem->{auth}};
- $toreplace{phone} =~ s/\D//g;
- $toreplace{dnsserver} = join ',', map { $modem->{$_} } "dns1", "dns2";
- $toreplace{dnsserver} .= $toreplace{dnsserver} && ',';
-
- #- using peerdns or dns1,dns2 avoid writing a /etc/resolv.conf file.
- $toreplace{peerdns} = "yes";
-
- $toreplace{connection} ||= 'DialupConnection';
- $toreplace{domain} ||= 'localdomain';
- $toreplace{intf} ||= 'ppp0';
- $toreplace{papname} = ($modem->{auth} eq 'PAP' || $modem->{auth} eq 'CHAP') && $toreplace{login};
-
- #- build ifcfg-ppp0.
- my $ifcfg = "$prefix/etc/sysconfig/network-scripts/ifcfg-ppp0";
- local *IFCFG; open IFCFG, ">$ifcfg" or die "Can't open $ifcfg";
- print IFCFG <<END;
-DEVICE="$toreplace{intf}"
-ONBOOT="no"
-USERCTL="no"
-MODEMPORT="/dev/modem"
-LINESPEED="115200"
-PERSIST="yes"
-DEFABORT="yes"
-DEBUG="yes"
-INITSTRING="ATZ"
-DEFROUTE="yes"
-HARDFLOWCTL="yes"
-ESCAPECHARS="no"
-PPPOPTIONS=""
-PAPNAME="$toreplace{papname}"
-REMIP=""
-NETMASK=""
-IPADDR=""
-MRU=""
-MTU=""
-DISCONNECTTIMEOUT="5"
-RETRYTIMEOUT="60"
-BOOTPROTO="none"
-PEERDNS="$toreplace{peerdns}"
-END
- foreach (1..2) {
- if ($toreplace{"dns$_"}) {
- print IFCFG <<END;
-DNS$_=$toreplace{"dns$_"}
-END
- }
- }
- close IFCFG;
-
- #- build chat-ppp0.
- my $chat = "$prefix/etc/sysconfig/network-scripts/chat-ppp0";
- local *CHAT; open CHAT, ">$chat" or die "Can't open $chat";
- print CHAT <<END;
-'ABORT' 'BUSY'
-'ABORT' 'ERROR'
-'ABORT' 'NO CARRIER'
-'ABORT' 'NO DIALTONE'
-'ABORT' 'Invalid Login'
-'ABORT' 'Login incorrect'
-'' 'ATZ'
-END
- if ($modem->{special_command}) {
- print CHAT <<END;
-'OK' '$modem->{special_command}'
-END
- }
- print CHAT <<END;
-'OK' 'ATDT$toreplace{phone}'
-'CONNECT' ''
-END
- if ($modem->{auth} eq 'Terminal-based' || $modem->{auth} eq 'Script-based') {
- print CHAT <<END;
-'ogin:--ogin:' '$toreplace{login}'
-'ord:' '$toreplace{passwd}'
-END
- }
- print CHAT <<END;
-'TIMEOUT' '5'
-'~--' ''
-END
- close CHAT;
- chmod 0600, $chat;
-
- if ($modem->{auth} eq 'PAP' || $modem->{auth} eq 'CHAP') {
- #- need to create a secrets file for the connection.
- my $secrets = "$prefix/etc/ppp/" . lc($modem->{auth}) . "-secrets";
- my @l = cat_($secrets);
- my $replaced = 0;
- do { $replaced ||= 1
- if s/^\s*"?$toreplace{login}"?\s+ppp0\s+(\S+)/"$toreplace{login}" ppp0 "$toreplace{passwd}"/; } foreach @l;
- if ($replaced) {
- local *F;
- open F, ">$secrets" or die "Can't open $secrets: $!";
- print F @l;
- } else {
- local *F;
- open F, ">>$secrets" or die "Can't open $secrets: $!";
- print F "$toreplace{login} ppp0 \"$toreplace{passwd}\"\n";
- }
- #- restore access right to secrets file, just in case.
- chmod 0600, $secrets;
- }
-
- #- install kppprc file according to used configuration.
- mkdir_p("$prefix/usr/share/config");
-
- {
- local *KPPPRC;
- open KPPPRC, ">$prefix/usr/share/config/kppprc" or die "Can't open $prefix/usr/share/config/kppprc: $!";
- #chmod 0600, "$prefix/usr/share/config/kppprc";
- print KPPPRC c::to_utf8(<<END);
-# KDE Config File
-[Account0]
-ExDNSDisabled=0
-AutoName=0
-ScriptArguments=
-AccountingEnabled=0
-DialString=ATDT
-Phonenumber=$toreplace{phone}
-IPAddr=0.0.0.0
-Domain=$toreplace{domain}
-Name=$toreplace{connection}
-VolumeAccountingEnabled=0
-pppdArguments=
-Password=$toreplace{passwd}
-BeforeDisconnect=
-Command=
-ScriptCommands=
-Authentication=$toreplace{kpppauth}
-DNS=$toreplace{dnsserver}
-SubnetMask=0.0.0.0
-AccountingFile=
-DefaultRoute=1
-Username=$toreplace{login}
-Gateway=0.0.0.0
-StorePassword=1
-DisconnectCommand=
-[Modem]
-BusyWait=0
-Enter=CR
-FlowControl=CRTSCTS
-Volume=0
-Timeout=60
-UseCDLine=0
-UseLockFile=1
-Device=/dev/modem
-Speed=115200
-[Graph]
-InBytes=0,0,255
-Text=0,0,0
-Background=255,255,255
-Enabled=true
-OutBytes=255,0,0
-[General]
-QuitOnDisconnect=0
-ShowLogWindow=0
-DisconnectOnXServerExit=1
-DefaultAccount=$toreplace{connection}
-iconifyOnConnect=1
-Hint_QuickHelp=0
-AutomaticRedial=0
-PPPDebug=0
-NumberOfAccounts=1
-ShowClock=1
-DockIntoPanel=0
-pppdTimeout=30
-END
- }
- miscellaneousNetwork($prefix);
-}
-
-sub miscellaneousNetwork {
- my ($prefix) = @_;
- setVarsInSh ("$prefix/etc/profile.d/proxy.sh", $::o->{miscellaneous}, qw(http_proxy ftp_proxy));
- setVarsInCsh("$prefix/etc/profile.d/proxy.csh", $::o->{miscellaneous}, qw(http_proxy ftp_proxy));
-}
-
-sub load_category_no_message {
- my ($category, $at_least_one) = @_;
- my @l;
- @l = modules::load_category($category, undef);
- @l = modules::load_category($category, undef, 'force') if !@l && $at_least_one;
- @l;
-}
-
-sub load_category {
- my ($in, $category, $auto, $at_least_one) = @_;
-
- my @l;
- if (!$::noauto) {
- my $w;
- my $wait_message = sub { $w = wait_load_module($in, $category, @_) };
- @l = modules::load_category($category, $wait_message);
- @l = modules::load_category($category, $wait_message, 'force') if !@l && $at_least_one;
- }
- if (my @err = grep { $_ } map { $_->{error} } @l) {
- $in->ask_warn('', join("\n", @err));
- }
- return @l if $auto && (@l || !$at_least_one);
-
- @l = map { $_->{description} } @l;
-
- if ($at_least_one && !@l) {
- @l = load_category__prompt($in, $category) or return;
- }
-
- load_category__prompt_for_more($in, $category, @l);
-}
-
-sub load_category__prompt_for_more {
- my ($in, $category, @l) = @_;
-
- (my $msg_type = $category) =~ s/\|.*//;
-
- while (1) {
- my $msg = @l ?
- [ _("Found %s %s interfaces", join(", ", @l), $msg_type),
- _("Do you have another one?") ] :
- _("Do you have any %s interfaces?", $msg_type);
-
- my $opt = [ __("Yes"), __("No") ];
- push @$opt, __("See hardware info") if $::expert;
- my $r = $in->ask_from_list_('', $msg, $opt, "No") or die 'already displayed';
- if ($r eq "No") { return @l }
- if ($r eq "Yes") {
- push @l, load_category__prompt($in, $category) || next;
- } else {
- $in->ask_warn('', [ detect_devices::stringlist() ]);
- }
- }
-}
-
-sub wait_load_module {
- my ($in, $category, $text, $module) = @_;
-#-PO: the first %s is the card type (scsi, network, sound,...)
-#-PO: the second is the vendor+model name
- $in->wait_message('',
- [ _("Installing driver for %s card %s", $category, $text),
- if_($::expert, _("(module %s)", $module))
- ]);
-}
-
-sub load_module__ask_options {
- my ($in, $module_descr, $parameters) = @_;
-
- if (@$parameters) {
- $in->ask_from('',
- _("You may now provide its options to module %s.\nNote that any address should be entered with the prefix 0x like '0x123'", $module_descr),
- [ map {; { label => $_->[0], help => $_->[1], val => \$_->[2] } } @$parameters ],
- ) or return;
- map { if_($_->[2], "$_->[0]=$_->[2]") } @$parameters;
- } else {
- split ' ', $in->ask_from_entry('',
-_("You may now provide options to module %s.
-Options are in format ``name=value name2=value2 ...''.
-For instance, ``io=0x300 irq=7''", $module_descr), _("Module options:"),
- );
- }
-}
-
-sub load_category__prompt {
- my ($in, $category) = @_;
-
- (my $msg_type = $category) =~ s/\|.*//;
- my %available_modules = map_each { $::a => $::b ? "$::a ($::b)" : $::a } modules::category2modules_and_description($category);
- my $module = $in->ask_from_listf('',
-#-PO: the %s is the driver type (scsi, network, sound,...)
- _("Which %s driver should I try?", $msg_type),
- sub { $available_modules{$_[0]} },
- [ keys %available_modules ]) or return;
- my $module_descr = $available_modules{$module};
-
- my @options;
- require modparm;
- my @parameters = modparm::parameters($module);
- if (@parameters && $in->ask_from_list_('',
-_("In some cases, the %s driver needs to have extra information to work
-properly, although it normally works fine without. Would you like to specify
-extra options for it or allow the driver to probe your machine for the
-information it needs? Occasionally, probing will hang a computer, but it should
-not cause any damage.", $module_descr), [ __("Autoprobe"), __("Specify options") ], 'Autoprobe') ne 'Autoprobe') {
- @options = load_module__ask_options($in, $module_descr, \@parameters);
- }
- while (1) {
- eval {
- my $w = wait_load_module($in, $category, $module_descr, $module);
- log::l("user asked for loading module $module (type $category, desc $module_descr)");
- modules::load([ $module, @options ]);
- };
- return $module_descr if !$@;
-
- $in->ask_yesorno('',
-_("Loading module %s failed.
-Do you want to try again with other parameters?", $module_descr), 1) or return;
-
- @options = load_module__ask_options($in, $module_descr, \@parameters);
- }
-}
-
-sub ask_users {
- my ($prefix, $in, $users, $security) = @_;
-
- my $u if 0; $u ||= {};
-
- my @shells = map { chomp; $_ } cat_("$prefix/etc/shells");
- my @icons = facesnames($prefix);
-
- my %high_security_groups = (
- xgrp => _("access to X programs"),
- rpm => _("access to rpm tools"),
- wheel => _("allow \"su\""),
- adm => _("access to administrative files"),
- );
- while (1) {
- $u->{password2} ||= $u->{password} ||= '';
- $u->{shell} ||= '/bin/bash';
- my $names = @$users ? _("(already added %s)", join(", ", map { $_->{realname} || $_->{name} } @$users)) : '';
-
- my %groups;
- my $verif = sub {
- $u->{password} eq $u->{password2} or $in->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,2);
- $security > 3 && length($u->{password}) < 6 and $in->ask_warn('', _("This password is too simple")), return (1,2);
- $u->{name} or $in->ask_warn('', _("Please give a user name")), return (1,0);
- $u->{name} =~ /^[a-z0-9_-]+$/ or $in->ask_warn('', _("The user name must contain only lower cased letters, numbers, `-' and `_'")), return (1,0);
- length($u->{name}) <= 32 or $in->ask_warn('', _("The user name is too long")), return (1,0);
- member($u->{name}, map { $_->{name} } @$users) and $in->ask_warn('', _("This user name is already added")), return (1,0);
- return 0;
- };
- my $ret = $in->ask_from_(
- { title => _("Add user"),
- messages => _("Enter a user\n%s", $names),
- ok => _("Accept user"),
- cancel => $security < 4 || @$users ? _("Done") : '',
- callbacks => {
- focus_out => sub {
- if ($_[0] eq 0) {
- $u->{name} ||= lc first($u->{realname} =~ /([\w-]+)/);
- }
- },
- complete => $verif,
- canceled => sub { $u->{name} ? &$verif : 0; },
- } }, [
- { label => _("Real name"), val => \$u->{realname} },
- { label => _("User name"), val => \$u->{name} },
- { label => _("Password"),val => \$u->{password}, hidden => 1 },
- { label => _("Password (again)"), val => \$u->{password2}, hidden => 1 },
- { label => _("Shell"), val => \$u->{shell}, list => [ shells($prefix) ], not_edit => !$::expert, advanced => 1 },
- if_($security <= 3 && @icons,
- { label => _("Icon"), val => \ ($u->{icon} ||= 'man'), list => \@icons, icon2f => sub { face2png($_[0], $prefix) }, format => \&translate },
- ),
- if_($security > 3,
- map {;
- { label => $_, val => \$groups{$_}, text => $high_security_groups{$_}, type => 'bool' }
- } keys %high_security_groups,
- ),
- ],
- );
- $u->{groups} = [ grep { $groups{$_} } keys %groups ];
-
- push @$users, $u if $u->{name};
- $u = {};
- $ret or return;
- }
-}
-
-sub autologin {
- my ($prefix, $o, $in) = @_;
-
- my $cmd = $prefix ? "chroot $prefix" : "";
- my @wm = (split (' ', `$cmd /usr/sbin/chksession -l 2>/dev/null`));
- my @users = map { $_->{name} } @{$o->{users} || []};
-
- if (@wm > 1 && @users && !$o->{authentication}{NIS} && $o->{security} <= 2) {
- add2hash_($o, { autologin => $users[0] });
-
- $in->ask_from_(
- { title => _("Autologin"),
- messages => _("I can set up your computer to automatically log on one user.
-Do you want to use this feature?"),
- ok => _("Yes"),
- cancel => _("No") },
- [ { label => _("Choose the default user:"), val => \$o->{autologin}, list => \@users },
- { label => _("Choose the window manager to run:"), val => \$o->{desktop}, list => \@wm } ]
- )
- or delete $o->{autologin};
- } else {
- delete $o->{autologin};
- }
-}
-
-sub selectLanguage {
- my ($in, $lang, $langs_) = @_;
- my $langs = $langs_ || {};
- my @langs = lang::list(exclude_non_necessary_utf8 => $::isInstall,
- exclude_non_installed_langs => !$::isInstall,
- );
- $in->ask_from_(
- { messages => _("Please choose a language to use."),
- title => 'language choice',
- advanced_messages => formatAlaTeX(_("Mandrake Linux can support multiple languages. Select
-the languages you would like to install. They will be available
-when your installation is complete and you restart your system.")),
- callbacks => {
- focus_out => sub { $langs->{$lang} = 1 },
- },
- },
- [ { val => \$lang, separator => '|',
- format => \&lang::lang2text, list => \@langs },
- if_($langs_, (map {;
- { val => \$langs->{$_->[0]}, type => 'bool', disabled => sub { $langs->{all} },
- text => $_->[1], advanced => 1,
- }
- } sort { $a->[1] cmp $b->[1] } map { [ $_, lang::lang2text($_) ] } lang::list()),
- { val => \$langs->{all}, type => 'bool', text => _("All"), advanced => 1 }),
- ]) or return;
- $lang;
-}
-
-sub write_passwd_user {
- my ($prefix, $u, $isMD5) = @_;
-
- $u->{pw} = &crypt($u->{password}, $isMD5) if $u->{password};
- $u->{shell} ||= '/bin/bash';
-
- substInFile {
- my $l = unpack_passwd($_);
- if ($l->{name} eq $u->{name}) {
- add2hash_($u, $l);
- $_ = pack_passwd($u);
- $u = {};
- }
- if (eof && $u->{name}) {
- $_ .= pack_passwd($u);
- }
- } "$prefix/etc/passwd";
-}
-
-sub set_login_serial_console {
- my ($prefix, $port, $speed) = @_;
-
- my $line = "s$port:12345:respawn:/sbin/getty ttyS$port DT$speed ansi\n";
- substInFile { s/^s$port:.*//; $_ = "$line" if eof } "$prefix/etc/inittab";
-}
-
-
-sub runlevel {
- my ($prefix, $runlevel) = @_;
- my $f = "$prefix/etc/inittab";
- -r $f or log::l("missing inittab!!!"), return;
- if ($runlevel) {
- substInFile { s/^id:\d:initdefault:\s*$/id:$runlevel:initdefault:\n/ } $f;
- } else {
- cat_($f) =~ /^id:(\d):initdefault:\s*$/ && $1;
- }
-}
-
-sub report_bug {
- my ($prefix, @other) = @_;
-
- sub header { "
-********************************************************************************
-* $_[0]
-********************************************************************************";
- }
-
- join '', map { chomp; "$_\n" }
- header("lspci"), detect_devices::stringlist(),
- header("pci_devices"), cat_("/proc/bus/pci/devices"),
- header("fdisk"), arch() =~ /ppc/ ? `$ENV{LD_LOADER} pdisk -l` : `$ENV{LD_LOADER} fdisk -l`,
- header("scsi"), cat_("/proc/scsi/scsi"),
- header("lsmod"), cat_("/proc/modules"),
- header("cmdline"), cat_("/proc/cmdline"),
- header("pcmcia: stab"), cat_("$prefix/var/lib/pcmcia/stab") || cat_("$prefix/var/run/stab"),
- header("usb"), cat_("/proc/bus/usb/devices"),
- header("partitions"), cat_("/proc/partitions"),
- header("cpuinfo"), cat_("/proc/cpuinfo"),
- header("syslog"), cat_("/tmp/syslog") || cat_("$prefix/var/log/syslog"),
- header("ddcxinfos"), ddcxinfos(),
- header("stage1.log"), cat_("/tmp/stage1.log") || cat_("$prefix/root/drakx/stage1.log"),
- header("ddebug.log"), cat_("/tmp/ddebug.log") || cat_("$prefix/root/drakx/ddebug.log"),
- header("install.log"), cat_("$prefix/root/drakx/install.log"),
- header("fstab"), cat_("$prefix/etc/fstab"),
- header("modules.conf"), cat_("$prefix/etc/modules.conf"),
- header("lilo.conf"), cat_("$prefix/etc/lilo.conf"),
- header("menu.lst"), cat_("$prefix/boot/grub/menu.lst"),
- header("/etc/modules"), cat_("$prefix/etc/modules"),
- map_index { even($::i) ? header($_) : $_ } @other;
-}
-
-sub devfssymlinkf {
- my ($if, $of, $prefix) = @_;
- symlinkf($if, "$prefix/dev/$of");
-
- output_p("$prefix/etc/devfs/conf.d/$of.conf",
-"REGISTER ^$if\$ CFUNCTION GLOBAL symlink $if $of
-UNREGISTER ^$if\$ CFUNCTION GLOBAL unlink $of
-");
-}
-
-sub fileshare_config {
- my ($in, $type) = @_; #- $type is 'nfs', 'smb' or ''
-
- my $file = '/etc/security/fileshare.conf';
- my %conf = getVarsFromSh($file);
-
- my @l = (__("No sharing"), __("Allow all users"), __("Custom"));
- my $restrict = exists $conf{RESTRICT} ? text2bool($conf{RESTRICT}) : 1;
-
- if ($restrict) {
- #- verify we can export in $type
- my %type2file = (nfs => [ '/etc/init.d/nfs', 'nfs-utils' ], smb => [ '/etc/init.d/smb', 'samba' ]);
- my @wanted = $type ? $type : keys %type2file;
- my @have = grep { -e $type2file{$_}[0] } @wanted;
- if (!@have) {
- if (@wanted == 1) {
- $in->ask_okcancel('', _("The package %s needs to be installed. Do you want to install it?", $type2file{$wanted[0]}[1]), 1) or return;
- } else {
- my %choices;
- my $wanted = $in->ask_many_from_list('', _("You can export using NFS or Samba. Please select which you'd like to use."),
- { list => \@wanted }) or return;
- @wanted = @$wanted or return;
- }
- $in->do_pkgs->install(map { $type2file{$_}[1] } @wanted);
- @have = grep { -e $type2file{$_}[0] } @wanted;
- }
- if (!@have) {
- $in->ask_warn('', _("Mandatory package %s is missing", $wanted[0]));
- return;
- }
- }
-
- my $r = $in->ask_from_list_('fileshare',
-_("Would you like to allow users to share some of their directories?
-Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.
-
-\"Custom\" permit a per-user granularity.
-"),
- \@l, $l[$restrict ? 0 : 1]) or return;
- $restrict = $r ne $l[1];
- $conf{RESTRICT} = bool2yesno($restrict);
-
- setVarsInSh($file, \%conf);
- if ($r eq $l[2]) {
- # custom
- if ($in->ask_from_no_check(
- {
- -e '/usr/bin/userdrake' ? (ok => _("Launch userdrake"), cancel => _("Cancel")) : (cancel => ''),
- messages =>
-_("The per-user sharing uses the group \"fileshare\".
-You can use userdrake to add a user in this group.")
- }, [])) {
- if (!fork) { exec "userdrake" or c::_exit(0) }
- }
- }
-}
-
-sub ddcxinfos {
- my @l = `$ENV{LD_LOADER} ddcxinfos`;
- if ($::isInstall && -e "/tmp/ddcxinfos") {
- my @l_old = cat_("/tmp/ddcxinfos");
- if (@l < @l_old) {
- log::l("new ddcxinfos is worse, keeping the previous one");
- @l = @l_old;
- } elsif (@l > @l_old) {
- log::l("new ddcxinfos is better, dropping the previous one");
- }
- }
- output("/tmp/ddcxinfos", @l) if $::isInstall;
- @l;
-}
-
-sub config_libsafe {
- my ($prefix, $libsafe) = @_;
- my %t = getVarsFromSh("$prefix/etc/sysconfig/system");
- if (@_ > 1) {
- $t{LIBSAFE} = bool2yesno($libsafe);
- setVarsInSh("$prefix/etc/sysconfig/system", \%t);
- }
- text2bool($t{LIBSAFE});
-}
-
-sub choose_security_options {
- my ($in, $security, $libsafe, $email, $options) = @_;
- my $expert_file = "/etc/security/msec/expert_mode";
-
- my @shown_options = ();
- my $key = "";
- my $i=0;
- my $title;
-
- my $expert_section = cat_($expert_file);
-
- if ($expert_section == 0) { $title = _("DrakSec - Network Advanced Options"); }
- elsif ($expert_section == 1) { $title = _("DrakSec - User Advanced Options"); }
- elsif ($expert_section == 2) { $title = _("DrakSec - Server Advanced Options"); }
-
- for $key (keys %$options) {
- $shown_options[$i]->{label} = "$options->{$key}{label}";
- $shown_options[$i]->{val} = $options->{$key}{val};
- $shown_options[$i]->{list} = $options->{$key}{list};
- $shown_options[$i]->{type} = $options->{$key}{type};
- $i++;
- }
-
- $in->ask_from(
- $title,
- _("Choose advanced security options\n\n"),
- [
- @shown_options
- ]
- );
-}
-
-sub choose_security_level {
- my ($in, $security, $libsafe) = @_;
- my $expert_file = "/etc/security/msec/expert_mode";
-
- my $email;
-
- my %l = (
- 0 => _("Welcome To Crackers"),
- 1 => _("Poor"),
- 2 => _("Standard"),
- 3 => _("High"),
- 4 => _("Higher"),
- 5 => _("Paranoid"),
- );
- my %help = (
- 0 => _("This level is to be used with care. It makes your system more easy to use,
-but very sensitive: it must not be used for a machine connected to others
-or to the Internet. There is no password access."),
- 1 => _("Password are now enabled, but use as a networked computer is still not recommended."),
- 2 => _("This is the standard security recommended for a computer that will be used to connect to the Internet as a client."),
- 3 => _("There are already some restrictions, and more automatic checks are run every night."),
- 4 => _("With this security level, the use of this system as a server becomes possible.
-The security is now high enough to use the system as a server which can accept
-connections from many clients. Note: if your machine is only a client on the Internet, you should better choose a lower level."),
- 5 => _("This is similar to the previous level, but the system is entirely closed and security features are at their maximum."),
- );
- delete @l{0,1};
- delete $l{5} if !$::expert;
-
- $in->ask_from(
- ("DrakSec Basic Options"),
- ("Please choose the desired security level") . "\n\n" .
- join('', map { "$l{$_}: " . formatAlaTeX($help{$_}) . "\n\n" } keys %l),
- [
- { label => _("Security level"), val => $security, list => [ sort keys %l ], format => sub { $l{$_} } },
- if_($in->do_pkgs->is_installed('libsafe') && arch() =~ /^i.86/,
- { label => _("Use libsafe for servers"), val => $libsafe, type => 'bool', text =>
- _("A library which defends against buffer overflow and format string attacks.") } ),
- { label => _("Security user (login or email)"), val => $email, },
- { clicked_may_quit => sub { open(EXPERT, '>'.$expert_file); print EXPERT "0"; close EXPERT; },
- val => _("NETWORK-RELATED SECURITY OPTIONS") },
- { clicked_may_quit => sub { open(EXPERT, '>'.$expert_file); print EXPERT "1"; close EXPERT; },
- val => _("USER-RELATED SECURITY OPTIONS") },
- { clicked_may_quit => sub { open(EXPERT, '>'.$expert_file); print EXPERT "2"; close EXPERT; },
- val => _("SERVER-RELATED SECURITY OPTIONS") }
- ],
- );
- }
-
-sub running_window_manager {
- my @window_managers = (
- 'kdeinit: kwin',
- qw(gnome-session icewm wmaker kwm afterstep fvwm fvwm2 fvwm95 mwm twm enlightenment xfce blackbox sawfish olvwm),
- );
- foreach (@window_managers) {
- return $_ if `/sbin/pidof "$_"` > 0;
- }
- '';
-}
-
-sub ask_window_manager_to_logout {
- my ($wm) = @_;
-
- my %h = (
- 'kwm' => "kwmcom logout",
- 'kdeinit: kwin' => "su $ENV{USER} -c 'dcop kdesktop default logout'",
- 'gnome-session' => "save-session --kill",
- 'icewm' => "killall -QUIT icewm",
- );
- system($h{$wm} || return);
- 1;
-}
-
-sub get_secure_level {
- my ($prefix) = @_;
-
- cat_("/etc/profile") =~ /export SECURE_LEVEL=(\d+)/ && $1 || #- 8.0 msec
- cat_("/etc/profile.d/msec.sh") =~ /export SECURE_LEVEL=(\d+)/ && $1 || #- 8.1 msec
- ${{ getVarsFromSh("$prefix/etc/sysconfig/msec") }}{SECURE_LEVEL} || #- 8.2 msec
- $ENV{SECURE_LEVEL};
-}
-
-sub alloc_raw_device {
- my ($prefix, $device) = @_;
- my $used = 0;
- my $raw_dev;
- substInFile {
- $used = max($used, $1) if m|^\s*/dev/raw/raw(\d+)|;
- if (eof) {
- $raw_dev = "raw/raw" . ($used + 1);
- $_ .= "/dev/$raw_dev /dev/$device\n";
- }
- } "$prefix/etc/sysconfig/rawdevices";
- $raw_dev;
-}
-
-sub config_dvd {
- my ($prefix) = @_;
- if (my @dvds = grep { detect_devices::isDvdDrive($_) } detect_devices::cdroms__faking_ide_scsi()) {
- log::l("configuring DVD");
- #- create /dev/dvd symlink
- each_index {
- devfssymlinkf($_->{device}, 'dvd' . ($::i ? $::i + 1 : ''), $prefix);
- } @dvds;
- if (my $raw_dev = alloc_raw_device($prefix, 'dvd')) {
- devfssymlinkf($raw_dev, 'rdvd', $prefix);
- }
- }
-}
-
-sub config_mtools {
- my ($prefix) = @_;
- my ($f1, $f2) = detect_devices::floppies_dev();
- substInFile {
- s|drive a: file="(.*?)"|drive a: file="/dev/$f1"|;
- s|drive b: file="(.*?)"|drive b: file="/dev/$f2"| if $f2;
- } "$prefix/etc/mtools.conf"
-}
-
-1;
diff --git a/perl-install/apps.net_monitor b/perl-install/apps.net_monitor
deleted file mode 100644
index d4dea7f88..000000000
--- a/perl-install/apps.net_monitor
+++ /dev/null
@@ -1,4 +0,0 @@
-USER=root
-PROGRAM=/usr/sbin/net_monitor.real
-SESSION=true
-FALLBACK=false
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
deleted file mode 100644
index df290424d..000000000
--- a/perl-install/bootloader.pm
+++ /dev/null
@@ -1,1073 +0,0 @@
-package bootloader; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%vga_modes);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use log;
-use any;
-use fsedit;
-use devices;
-use loopback;
-use detect_devices;
-use partition_table_raw;
-use run_program;
-use modules;
-
-
-%vga_modes = (
-'ask' => "Ask at boot",
-'normal' => "Normal",
-'0x0f01' => "80x50",
-'0x0f02' => "80x43",
-'0x0f03' => "80x28",
-'0x0f05' => "80x30",
-'0x0f06' => "80x34",
-'0x0f07' => "80x60",
-'0x0122' => "100x30",
- 785 => "640x480 in 16 bits (FrameBuffer only)",
- 788 => "800x600 in 16 bits (FrameBuffer only)",
- 791 => "1024x768 in 16 bits (FrameBuffer only)",
- 794 => "1280x1024 in 16 bits (FrameBuffer only)",
-);
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-sub get {
- my ($kernel, $bootloader) = @_;
- $_->{kernel_or_dev} && $_->{kernel_or_dev} eq $kernel and return $_ foreach @{$bootloader->{entries}};
- undef;
-}
-sub get_label {
- my ($label, $bootloader) = @_;
- $_->{label} && $_->{label} eq $label and return $_ foreach @{$bootloader->{entries}};
- undef;
-}
-
-sub mkinitrd($$$) {
- my ($prefix, $kernelVersion, $initrdImage) = @_;
-
- $::oem or $::testing || -e "$prefix/$initrdImage" and return;
-
- my $loop_boot = loopback::prepare_boot($prefix);
-
- modules::load('loop');
- run_program::rooted($prefix, "mkinitrd", "-v", "-f", $initrdImage, "--ifneeded", $kernelVersion) or unlink("$prefix/$initrdImage");
-
- loopback::save_boot($loop_boot);
-
- -e "$prefix/$initrdImage" or die "mkinitrd failed";
-}
-
-sub mkbootdisk($$$;$) {
- my ($prefix, $kernelVersion, $dev, $append) = @_;
-
- modules::load(if_(arch() =~ /sparc/, 'romfs'), 'loop');
- my @l = qw(mkbootdisk --noprompt);
- push @l, "--appendargs", $append if $append;
- eval { modules::load('vfat') };
- run_program::rooted_or_die($prefix, @l, "--device", "/dev/$dev", $kernelVersion);
-}
-
-sub read($$) {
- my ($prefix, $file) = @_;
- my $global = 1;
- my ($e, $v, $f);
- my %b;
- foreach (cat_("$prefix$file")) {
- ($_, $v) = /^\s*(.*?)\s*(?:=\s*(.*?))?\s*$/;
-
- if (/^(image|other)$/) {
- if (arch() =~ /ppc/) {
- $v =~ s/hd:\d+,//g;
- }
- push @{$b{entries}}, $e = { type => $_, kernel_or_dev => $v };
- $global = 0;
- } elsif ($global) {
- if ($_ eq 'disk' && $v =~ /(\S+)\s+bios\s*=\s*(\S+)/) {
- $b{bios}{$1} = $2;
- } elsif ($_ eq 'bios') {
- $b{bios}{$b{disk}} = $v;
- } elsif ($_ eq 'init-message') {
- $v =~ s/\\n//g;
- $v =~ s/"//g;
- $b{'init-message'} = $v;
- } else {
- $b{$_} = $v || 1;
- }
- } else {
- if ((/map-drive/ .. /to/) && /to/) {
- $e->{mapdrive}{$e->{'map-drive'}} = $v;
- } else {
- if (arch() =~ /ppc/) {
- $v =~ s/hd:\d+,//g;
- $v =~ s/"//g;
- }
- $e->{$_} = $v || 1;
- }
- }
- }
- if (arch() !~ /ppc/) {
- delete $b{timeout} unless $b{prompt};
- $_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
- $b{timeout} = $b{timeout} / 10 if $b{timeout};
- $b{message} = cat_("$prefix$b{message}") if $b{message};
- }
- \%b;
-}
-
-sub suggest_onmbr {
- my ($hds) = @_;
-
- my $type = partition_table_raw::typeOfMBR($hds->[0]{device});
- !$type || member($type, qw(dos dummy lilo grub empty)), !$type;
-}
-
-sub compare_entries ($$) {
- my ($a, $b) = @_;
- my %entries;
-
- @entries{keys %$a, keys %$b} = ();
- $a->{$_} eq $b->{$_} and delete $entries{$_} foreach keys %entries;
- scalar keys %entries;
-}
-
-sub add_entry($$) {
- my ($entries, $v) = @_;
- my (%usedold, $freeold);
-
- do { $usedold{$1 || 0} = 1 if $_->{label} =~ /^old([^_]*)_/ } foreach @$entries;
- foreach (0..scalar keys %usedold) { exists $usedold{$_} or $freeold = $_ || '', last }
-
- foreach (@$entries) {
- if ($_->{label} eq $v->{label}) {
- compare_entries($_, $v) or return; #- avoid inserting it twice as another entry already exists !
- $_->{label} = "old${freeold}_$_->{label}";
- }
- }
- push @$entries, $v;
-}
-
-sub add_kernel {
- my ($prefix, $lilo, $version, $ext, $root, $v) = @_;
-
- #- new versions of yaboot don't handle symlinks
- my $ppcext = $ext;
- if (arch() =~ /ppc/) {
- $ext = "-$version";
- }
-
- log::l("adding vmlinuz$ext as vmlinuz-$version");
- -e "$prefix/boot/vmlinuz-$version" or log::l("unable to find kernel image $prefix/boot/vmlinuz-$version"), return;
- my $image = "/boot/vmlinuz" . ($ext ne "-$version" &&
- symlinkf("vmlinuz-$version", "$prefix/boot/vmlinuz$ext") ? $ext : "-$version");
- my $initrd = eval {
- mkinitrd($prefix, $version, "/boot/initrd-$version.img");
- "/boot/initrd" . ($ext ne "-$version" &&
- symlinkf("initrd-$version.img", "$prefix/boot/initrd$ext.img") ? $ext : "-$version") . ".img";
- };
- my $label = $ext =~ /-(default)/ ? $1 : "linux$ext";
-
- #- more yaboot concessions - PPC
- if (arch() =~ /ppc/) {
- $label = $ppcext =~ /-(default)/ ? $1 : "linux$ppcext";
- }
-
- add2hash($v,
- {
- type => 'image',
- root => "/dev/$root",
- label => $label,
- kernel_or_dev => $image,
- initrd => $initrd,
- append => $lilo->{perImageAppend},
- });
- add_entry($lilo->{entries}, $v);
- $v;
-}
-
-sub unpack_append {
- my ($s) = @_;
- my @l = split(' ', $s);
- [ grep { !/=/ } @l ], [ map { if_(/(.*?)=(.*)/, [$1, $2]) } @l ];
-}
-sub pack_append {
- my ($simple, $dict) = @_;
- join(' ', @$simple, map { "$_->[0]=$_->[1]" } @$dict);
-}
-
-sub append__mem_is_memsize { $_[0] =~ /^\d+[kM]?$/i }
-
-sub get_append {
- my ($b, $key) = @_;
- my (undef, $dict) = unpack_append($b->{perImageAppend});
- my @l = map { $_->[1] } grep { $_->[0] eq $key } @$dict;
-
- #- suppose we want the memsize
- @l = grep { append__mem_is_memsize($_) } @l if $key eq 'mem';
-
- log::l("more than one $key in $b->{perImageAppend}") if @l > 1;
- $l[0];
-}
-sub add_append {
- my ($b, $key, $val) = @_;
-
- foreach (\$b->{perImageAppend}, map { \$_->{append} } grep { $_->{type} eq 'image' } @{$b->{entries}}) {
- my ($simple, $dict) = unpack_append($$_);
- @$dict = grep { $_->[0] ne $key || $key eq 'mem' && append__mem_is_memsize($_->[1]) != append__mem_is_memsize($val) } @$dict;
- push @$dict, [ $key, $val ] if $val;
- $$_ = pack_append($simple, $dict);
- log::l("add_append: $$_");
- }
-}
-sub may_append {
- my ($b, $key, $val) = @_;
- add_append($b, $key, $val) if !get_append($b, $key);
-}
-
-sub configure_entry($$) {
- my ($prefix, $entry) = @_;
- if ($entry->{type} eq 'image') {
- my $specific_version;
- $entry->{kernel_or_dev} =~ /vmlinu.-(.*)/ and $specific_version = $1;
- readlink("$prefix/$entry->{kernel_or_dev}") =~ /vmlinu.-(.*)/ and $specific_version = $1;
-
- if ($specific_version) {
- $entry->{initrd} or $entry->{initrd} = "/boot/initrd-$specific_version.img";
- if (! -e "$prefix/$entry->{initrd}" || $::oem) {
- eval { mkinitrd($prefix, $specific_version, "$entry->{initrd}") };
- undef $entry->{initrd} if $@;
- }
- }
- }
- $entry;
-}
-
-sub dev2prompath { #- SPARC only
- my ($dev) = @_;
- my ($wd, $num) = $dev =~ /^(.*\D)(\d*)$/;
- require c;
- $dev = c::disk2PromPath($wd) and $dev = $dev =~ /^sd\(/ ? "$dev$num" : "$dev;$num";
- $dev;
-}
-
-sub get_kernels_and_labels {
- my ($prefix) = @_;
- my $dir = "$prefix/boot";
- my @l = grep { /^vmlinuz-/ } all($dir);
- my @kernels = grep { ! -l "$dir/$_" } @l;
-
- my @preferred = ('', 'secure', 'enterprise', 'smp');
- my %weights = map_index { $_ => $::i } @preferred;
-
- require pkgs;
- @kernels =
- sort { pkgs::versionCompare($b->[1], $a->[1]) || $weights{$a->[2]} <=> $weights{$b->[2]} }
- map {
- if (my ($version, $ext) = /vmlinuz-((?:[\-.\d]*(?:mdk)?)*)(.*)/) {
- [ "$version$ext", $version, $ext ];
- } else {
- log::l("non recognised kernel name $_");
- ();
- }
- } @kernels;
-
- my %majors;
- foreach (@kernels) {
- push @{$majors{$1}}, $_ if $_->[1] =~ /^(2\.\d+)/
- }
- while (my ($major, $l) = each %majors) {
- $l->[0][1] = $major if @$l == 1;
- }
-
- my %labels;
- foreach (@kernels) {
- my ($complete_version, $version, $ext) = @$_;
- my $label = '';
- if (exists $labels{$label}) {
- $label = "-$ext";
- if (!$ext || $labels{$label}) {
- $label = "-$version$ext";
- }
- }
- $labels{$label} = $complete_version;
- }
- %labels;
-}
-
-sub suggest {
- my ($prefix, $lilo, $hds, $fstab, $vga_fb, $quiet) = @_;
- my $root_part = fsedit::get_root($fstab);
- my $root = isLoopback($root_part) ? "loop7" : $root_part->{device};
- my $boot = fsedit::get_root($fstab, 'boot')->{device};
- my $partition = first($boot =~ /\D*(\d*)/);
- #- PPC xfs module requires enlarged initrd
- my $xfsroot = isThisFs("xfs", $root_part);
-
- require c; c::initSilo() if arch() =~ /sparc/;
-
- my ($onmbr, $unsafe) = $lilo->{crushMbr} ? (1, 0) : suggest_onmbr($hds);
- add2hash_($lilo, arch() =~ /sparc/ ?
- {
- entries => [],
- timeout => 10,
- use_partition => 0, #- we should almost always have a whole disk partition.
- root => "/dev/$root",
- partition => $partition || 1,
- boot => $root eq $boot && "/boot", #- this helps for getting default partition for silo.
- } : arch() =~ /ppc/ ?
- {
- defaultos => "linux",
- entries => [],
- 'init-message' => "Welcome to Mandrake Linux!",
- delay => 30, #- OpenFirmware delay
- timeout => 50,
- enableofboot => 1,
- enablecdboot => 1,
- useboot => $boot,
- xfsroot => $xfsroot,
- } :
- {
- bootUnsafe => $unsafe,
- entries => [],
- timeout => $onmbr && 10,
- nowarn => 1,
- if_(arch() !~ /ia64/,
- lba32 => 1,
- boot => "/dev/" . ($onmbr ? $hds->[0]{device} : fsedit::get_root($fstab, 'boot')->{device}),
- map => "/boot/map",
- ),
- });
-
- if (!$lilo->{message} || $lilo->{message} eq "1") {
- $lilo->{message} = join('', cat_("$prefix/boot/message"));
- if (!$lilo->{message}) {
- my $msg_en =
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-__("Welcome to %s the operating system chooser!
-
-Choose an operating system in the list above or
-wait %d seconds for default boot.
-
-");
- my $msg = translate($msg_en);
- #- use the english version if more than 20% of 8bits chars
- $msg = $msg_en if int(grep { $_ & 0x80 } unpack "c*", $msg) / length($msg) > 0.2;
- $lilo->{message} = sprintf $msg, arch() =~ /sparc/ ? "SILO" : "LILO", $lilo->{timeout};
- }
- }
-
- add2hash_($lilo, { memsize => $1 }) if cat_("/proc/cmdline") =~ /\bmem=(\d+[KkMm]?)(?:\s.*)?$/;
- if (my ($s, $port, $speed) = cat_("/proc/cmdline") =~ /console=(ttyS(\d),(\d+)\S*)/) {
- log::l("serial console $s $port $speed");
- add_append($lilo, 'console' => $s);
- any::set_login_serial_console($prefix, $port, $speed);
- }
-
- my %labels = get_kernels_and_labels($prefix);
- $labels{''} or die "no kernel installed";
-
- while (my ($ext, $version) = each %labels) {
- my $entry = add_kernel($prefix, $lilo, $version, $ext, $root,
- {
- if_($vga_fb && $ext eq '', vga => $vga_fb), #- using framebuffer
- });
- $entry->{append} .= " quiet" if $vga_fb && $version !~ /smp|enterprise/ && $quiet;
-
- if ($vga_fb && $ext eq '') {
- add_kernel($prefix, $lilo, $version, $ext, $root, { label => 'linux-nonfb' });
- }
- }
- my $failsafe = add_kernel($prefix, $lilo, $labels{''}, '', $root, { label => 'failsafe' });
- $failsafe->{append} =~ s/devfs=mount/devfs=nomount/;
- $failsafe->{append} .= " failsafe";
-
- if (arch() =~ /sparc/) {
- #- search for SunOS, it could be a really better approach to take into account
- #- partition type for mounting point.
- my $sunos = 0;
- foreach (@$hds) {
- foreach (@{$_->{primary}{normal}}) {
- my $path = $_->{device} =~ m|^/| && $_->{device} !~ m|^/dev/| ? $_->{device} : dev2prompath($_->{device});
- add_entry($lilo->{entries},
- {
- type => 'other',
- kernel_or_dev => $path,
- label => "sunos" . ($sunos++ ? $sunos : ''),
- }) if $path && isSunOS($_) && type2name($_->{type}) =~ /root/i;
- }
- }
- } elsif (arch() =~ /ppc/) {
- #- if we identified a MacOS partition earlier - add it
- if (defined $partition_table_mac::macos_part) {
- add_entry($lilo->{entries},
- {
- label => "macos",
- kernel_or_dev => $partition_table_mac::macos_part
- });
- }
- } elsif (arch() !~ /ia64/) {
- #- search for dos (or windows) boot partition. Don't look in extended partitions!
- my %nbs;
- foreach (@$hds) {
- foreach (@{$_->{primary}{normal}}) {
- my $label = isNT($_) ? 'NT' : isDos($_) ? 'dos' : 'windows';
- add_entry($lilo->{entries},
- {
- type => 'other',
- kernel_or_dev => "/dev/$_->{device}",
- label => $label . ($nbs{$label}++ ? $nbs{$label} : ''),
- if_($_->{device} =~ /[1-4]$/,
- table => "/dev/$_->{rootDevice}"
- ),
- unsafe => 1
- }) if isNT($_) || isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) });
- }
- }
- }
- foreach ('secure', 'enterprise', 'smp') {
- if (get_label("linux-$_", $lilo)) {
- $lilo->{default} ||= "linux-$_";
- last;
- }
- }
- $lilo->{default} ||= "linux";
-
- my %l = (
- yaboot => to_bool(arch() =~ /ppc/),
- silo => to_bool(arch() =~ /sparc/),
- lilo => to_bool(arch() !~ /sparc|ppc/) && !isLoopback(fsedit::get_root($fstab)),
- grub => to_bool(arch() !~ /sparc|ppc/ && !isRAID(fsedit::get_root($fstab))),
- loadlin => to_bool(arch() !~ /sparc|ppc/) && -e "/initrd/loopfs/lnx4win",
- );
- unless ($lilo->{methods}) {
- $lilo->{methods} ||= { map { $_ => 1 } grep { $l{$_} } keys %l };
- if ($lilo->{methods}{lilo} && -e "$prefix/boot/message-graphic") {
- $lilo->{methods}{lilo} = "lilo-graphic";
- exists $lilo->{methods}{grub} and $lilo->{methods}{grub} = undef;
- }
- }
-}
-
-sub suggest_floppy {
- my ($bootloader) = @_;
-
- my $floppy = detect_devices::floppy() or return;
- $floppy eq 'fd0' or log::l("suggest_floppy: not adding $floppy"), return;
-
- add_entry($bootloader->{entries},
- {
- type => 'other',
- kernel_or_dev => '/dev/fd0',
- label => 'floppy',
- unsafe => 1
- });
-}
-
-sub keytable($$) {
- my ($prefix, $f) = @_;
- local $_ = $f;
- if ($_ && !/\.klt$/) {
- $f = "/boot/$_.klt";
- run_program::rooted($prefix, "keytab-lilo.pl", ">", $f, $_) or undef $f;
- }
- $f && -r "$prefix/$f" && $f;
-}
-
-sub has_profiles { to_bool(get_label("office", $b)) }
-sub set_profiles {
- my ($b, $want_profiles) = @_;
-
- my $office = get_label("office", $b);
- if ($want_profiles xor $office) {
- my $e = get_label("linux", $b);
- if ($want_profiles) {
- push @{$b->{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" };
- $e->{append} .= " prof=Home";
- } else {
- # remove profiles
- $e->{append} =~ s/\s*prof=\w+//;
- @{$b->{entries}} = grep { $_ != $office } @{$b->{entries}};
- }
- }
-
-}
-
-sub get_of_dev($$) {
- my ($prefix, $unix_dev) = @_;
- #- don't care much for this - need to run ofpath rooted, and I need the result
- #- In test mode, just run on "/", otherwise you can't get to the /proc files
- if ($::testing) {
- $prefix = "";
- }
- run_program::rooted_or_die($prefix, "/usr/local/sbin/ofpath $unix_dev", ">", "/tmp/ofpath");
- open(FILE, "$prefix/tmp/ofpath") || die "Can't open $prefix/tmp/ofpath";
- my $of_dev = "";
- local $_ = "";
- while (<FILE>){
- $of_dev = $_;
- }
- chop($of_dev);
- my @del_file = ($prefix . "/tmp/ofpath");
- unlink (@del_file);
- log::l("OF Device: $of_dev");
- $of_dev;
-}
-
-sub install_yaboot($$$) {
- my ($prefix, $lilo, $fstab, $hds) = @_;
- $lilo->{prompt} = $lilo->{timeout};
-
- if ($lilo->{message}) {
- local *F;
- open F, ">$prefix/boot/message" and print F $lilo->{message} or $lilo->{message} = 0;
- }
- {
- local *F;
- local $\ = "\n";
- my $f = "$prefix/etc/yaboot.conf";
- open F, ">$f" or die "cannot create yaboot config file: $f";
- log::l("writing yaboot config to $f");
-
- print F "#yaboot.conf - generated by DrakX";
- print F "init-message=\"\\n$lilo->{'init-message'}\\n\"" if $lilo->{'init-message'};
-
- if ($lilo->{boot}) {
- print F "boot=$lilo->{boot}";
- my $of_dev = get_of_dev($prefix, $lilo->{boot});
- print F "ofboot=$of_dev";
- } else {
- die "no bootstrap partition defined."
- }
-
- $lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(delay timeout);
- print F "install=/usr/local/lib/yaboot/yaboot";
- print F "magicboot=/usr/local/lib/yaboot/ofboot";
- $lilo->{$_} and print F $_ foreach qw(enablecdboot enableofboot);
- $lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(defaultos default);
- #- print F "nonvram";
- my $boot = "/dev/" . $lilo->{useboot} if $lilo->{useboot};
-
- foreach (@{$lilo->{entries}}) {
-
- if ($_->{type} eq "image") {
- my $of_dev = '';
- if (($boot !~ /$_->{root}/) && $boot) {
- $of_dev = get_of_dev($prefix, $boot);
- print F "$_->{type}=$of_dev," . substr($_->{kernel_or_dev}, 5);
- } else {
- $of_dev = get_of_dev($prefix, $_->{root});
- print F "$_->{type}=$of_dev,$_->{kernel_or_dev}";
- }
- print F "\tlabel=", substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
- print F "\troot=$_->{root}";
- if (($boot !~ /$_->{root}/) && $boot) {
- print F "\tinitrd=$of_dev," . substr($_->{initrd}, 5) if $_->{initrd};
- } else {
- print F "\tinitrd=$of_dev,$_->{initrd}" if $_->{initrd};
- }
- #- xfs module on PPC requires larger initrd - say 6MB?
- print F "\tinitrd-size=6144" if $lilo->{xfsroot};
- print F "\tappend=\" $_->{append}\"" if $_->{append};
- print F "\tread-write" if $_->{'read-write'};
- print F "\tread-only" if !$_->{'read-write'};
- } else {
- my $of_dev = get_of_dev($prefix, $_->{kernel_or_dev});
- print F "$_->{label}=$of_dev";
- }
- }
- }
- log::l("Installing boot loader...");
- my $f = "$prefix/tmp/of_boot_dev";
- my $of_dev = get_of_dev($prefix, $lilo->{boot});
- output($f, "$of_dev\n");
- $::testing and return;
- if (defined $install_steps_interactive::new_bootstrap) {
- run_program::run("hformat", "$lilo->{boot}") or die "hformat failed";
- }
- run_program::rooted_or_die($prefix, "/sbin/ybin", "2>", "/tmp/.error");
- unlink "$prefix/tmp/.error";
-}
-
-sub install_silo($$$) {
- my ($prefix, $silo, $fstab) = @_;
- my $boot = fsedit::get_root($fstab, 'boot')->{device};
- my ($wd, $num) = $boot =~ /^(.*\D)(\d*)$/;
-
- #- setup boot promvars for.
- require c;
- if ($boot =~ /^md/) {
- #- get all mbr devices according to /boot are listed,
- #- then join all zero based partition translated to prom with ';'.
- #- keep bootdev with the first of above.
- log::l("/boot is present on raid partition which is not currently supported for promvars");
- } else {
- if (!$silo->{use_partition}) {
- foreach (@$fstab) {
- if (!$_->{start} && $_->{device} =~ /$wd/) {
- $boot = $_->{device};
- log::l("found a zero based partition in $wd as $boot");
- last;
- }
- }
- }
- $silo->{bootalias} = c::disk2PromPath($boot);
- $silo->{bootdev} = $silo->{bootalias};
- log::l("preparing promvars for device=$boot");
- }
- c::hasAliases() or log::l("clearing promvars alias as non supported"), $silo->{bootalias} = '';
-
- if ($silo->{message}) {
- local *F;
- open F, ">$prefix/boot/message" and print F $silo->{message} or $silo->{message} = 0;
- }
- {
- local *F;
- local $\ = "\n";
- my $f = "$prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
- symlinkf "../boot/silo.conf", "$prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
- open F, ">$f" or die "cannot create silo config file: $f";
- log::l("writing silo config to $f");
-
- $silo->{$_} and print F "$_=$silo->{$_}" foreach qw(partition root default append);
- $silo->{$_} and print F $_ foreach qw(restricted);
- print F "password=", $silo->{password} if $silo->{restricted} && $silo->{password}; #- also done by msec
- print F "timeout=", round(10 * $silo->{timeout}) if $silo->{timeout};
- print F "message=$silo->{boot}/message" if $silo->{message};
-
- foreach (@{$silo->{entries}}) {#my ($v, $e) = each %{$silo->{entries}}) {
- my $type = "$_->{type}=$_->{kernel_or_dev}"; $type =~ s|/boot|$silo->{boot}|;
- print F $type;
- print F "\tlabel=$_->{label}";
-
- if ($_->{type} eq "image") {
- my $initrd = $_->{initrd}; $initrd =~ s|/boot|$silo->{boot}|;
- print F "\tpartition=$_->{partition}" if $_->{partition};
- print F "\troot=$_->{root}" if $_->{root};
- print F "\tinitrd=$initrd" if $_->{initrd};
- print F "\tappend=\"$1\"" if $_->{append} =~ /^\s*"?(.*?)"?\s*$/;
- print F "\tread-write" if $_->{'read-write'};
- print F "\tread-only" if !$_->{'read-write'};
- }
- }
- }
- log::l("Installing boot loader...");
- $::testing and return;
- run_program::rooted($prefix, "silo", "2>", "/tmp/.error", $silo->{use_partition} ? ("-t") : ()) or
- run_program::rooted_or_die($prefix, "silo", "2>", "/tmp/.error", "-p", "2", $silo->{use_partition} ? ("-t") : ());
- unlink "$prefix/tmp/.error";
-
- #- try writing in the prom.
- log::l("setting promvars alias=$silo->{bootalias} bootdev=$silo->{bootdev}");
- require c;
- c::setPromVars($silo->{bootalias}, $silo->{bootdev});
-}
-
-sub make_label_lilo_compatible {
- my ($label) = @_;
- $label = substr($label, 0, 15); #- lilo doesn't handle more than 15 char long labels
- $label =~ s/\s/_/g; #- lilo doesn't like spaces
- $label;
-}
-
-sub write_lilo_conf {
- my ($prefix, $lilo, $fstab, $hds) = @_;
- $lilo->{prompt} = $lilo->{timeout};
-
- delete $lilo->{linear} if $lilo->{lba32};
-
- my $file2fullname = sub {
- my ($file) = @_;
- if (arch() =~ /ia64/) {
- (my $part, $file) = fsedit::file2part($prefix, $fstab, $file);
- my %hds = map_index { $_ => "hd$::i" } map { $_->{device} }
- sort { isFat($b) <=> isFat($a) || $a->{device} cmp $b->{device} } fsedit::get_fstab(@$hds);
- %hds->{$part->{device}} . ":" . $file;
- } else {
- $file
- }
- };
-
- my %bios2dev = map_index { $::i => $_ } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot});
- my %dev2bios = reverse %bios2dev;
-
- if (is_empty_hash_ref($lilo->{bios} ||= {})) {
- my $dev = $hds->[0]{device};
- if ($dev2bios{$dev}) {
- log::l("Since we're booting on $bios2dev{0}, make it bios=0x80, whereas $dev is now " . (0x80 + $dev2bios{$dev}));
- $lilo->{bios}{"/dev/$bios2dev{0}"} = '0x80';
- $lilo->{bios}{"/dev/$dev"} = sprintf("0x%x", 0x80 + $dev2bios{$dev});
- }
- foreach (0 .. 3) {
- my ($letter) = $bios2dev{$_} =~ /hd([^ac])/; #- at least hda and hdc are handled correctly :-/
- next if $lilo->{bios}{"/dev/$bios2dev{$_}"} || !$letter;
- next if
- $_ > 0 #- always print if first disk is hdb, hdd, hde...
- && $bios2dev{$_ - 1} eq "hd" . chr(ord($letter) - 1);
- #- no need to help lilo with hdb (resp. hdd, hdf...)
- log::l("Helping lilo: $bios2dev{$_} must be " . (0x80 + $_));
- $lilo->{bios}{"/dev/$bios2dev{$_}"} = sprintf("0x%x", 0x80 + $_);
- }
- }
-
- {
- local *F;
- local $\ = "\n";
- my $f = arch() =~ /ia64/ ? "$prefix/boot/efi/elilo.conf" : "$prefix/etc/lilo.conf";
-
- open F, ">$f" or die "cannot create lilo config file: $f";
- log::l("writing lilo config to $f");
-
- chmod 0600, $f if $lilo->{password};
-
- #- normalize: RESTRICTED is only valid if PASSWORD is set
- delete $lilo->{restricted} if !$lilo->{password};
-
- local $lilo->{default} = make_label_lilo_compatible($lilo->{default});
- $lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(boot map install vga default keytable);
- $lilo->{$_} and print F $_ foreach qw(linear lba32 compact prompt nowarn restricted);
- print F "append=\"$lilo->{append}\"" if $lilo->{append};
- print F "password=", $lilo->{password} if $lilo->{password}; #- also done by msec
- print F "timeout=", round(10 * $lilo->{timeout}) if $lilo->{timeout};
- print F "serial=", $1 if get_append($lilo, 'console') =~ /ttyS(.*)/;
-
- print F "message=/boot/message" if (arch() !~ /ia64/);
- print F "menu-scheme=wb:bw:wb:bw" if (arch() !~ /ia64/);
-
- print F "ignore-table" if grep { $_->{unsafe} && $_->{table} } @{$lilo->{entries}};
-
- while (my ($dev, $bios) = each %{$lilo->{bios}}) {
- print F "disk=$dev bios=$bios";
- }
-
- foreach (@{$lilo->{entries}}) {
- print F "$_->{type}=", $file2fullname->($_->{kernel_or_dev});
- print F "\tlabel=", make_label_lilo_compatible($_->{label});
-
- if ($_->{type} eq "image") {
- print F "\troot=$_->{root}" if $_->{root};
- print F "\tinitrd=", $file2fullname->($_->{initrd}) if $_->{initrd};
- print F "\tappend=\"$_->{append}\"" if $_->{append};
- print F "\tvga=$_->{vga}" if $_->{vga};
- print F "\tread-write" if $_->{'read-write'};
- print F "\tread-only" if !$_->{'read-write'};
- } else {
- print F "\ttable=$_->{table}" if $_->{table};
- print F "\tunsafe" if $_->{unsafe} && !$_->{table};
-
- if (my ($dev) = $_->{table} =~ m|/dev/(.*)|) {
- if ($dev2bios{$dev}) {
- #- boot off the nth drive, so reverse the BIOS maps
- my $nb = sprintf("0x%x", 0x80 + $dev2bios{$dev});
- $_->{mapdrive} ||= { '0x80' => $nb, $nb => '0x80' };
- }
- }
- while (my ($from, $to) = each %{$_->{mapdrive} || {}}) {
- print F "\tmap-drive=$from";
- print F "\t to=$to";
- }
- }
- }
- }
-}
-
-sub install_lilo {
- my ($prefix, $lilo, $fstab, $hds) = @_;
-
- $lilo->{install} = 'text' if $lilo->{methods}{lilo} eq 'lilo-text';
- output("$prefix/boot/message-text", $lilo->{message}) if $lilo->{message};
- symlinkf "message-" . ($lilo->{methods}{lilo} eq 'lilo-graphic' ? 'graphic' : 'text'), "$prefix/boot/message";
-
- write_lilo_conf($prefix, $lilo, $fstab, $hds);
-
- log::l("Installing boot loader...");
- $::testing and return;
- run_program::rooted_or_die($prefix, "lilo", "2>", "/tmp/.error") if (arch() !~ /ia64/);
- unlink "$prefix/tmp/.error";
-}
-
-sub dev2bios {
- my ($hds, $where) = @_;
- $where =~ s|/dev/||;
- my @dev = map { $_->{device} } @$hds;
- member($where, @dev) or ($where) = @dev; #- if not on mbr,
-
- s/h(d[e-g])/x$1/ foreach $where, @dev; #- emulates ultra66 as xd_
-
- my $start = substr($where, 0, 2);
-
- my $translate = sub {
- $_ eq $where ? "aaa" : #- if exact match, value it first
- /^$start(.*)/ ? "ad$1" : #- if same class (ide/scsi/ultra66), value it before other classes
- $_;
- };
- @dev = map { $_->[0] }
- sort { $a->[1] cmp $b->[1] }
- map { [ $_, &$translate ] } @dev;
-
- s/x(d.)/h$1/ foreach @dev; #- switch back;
-
- @dev;
-}
-
-sub dev2grub {
- my ($dev, $dev2bios) = @_;
- $dev =~ m|^(/dev/)?(...)(.*)$| or die "dev2grub (bad device $dev), caller is " . join(":", caller());
- my $grub = $dev2bios->{$2} or die "dev2grub ($2)";
- "($grub" . ($3 && "," . ($3 - 1)) . ")";
-}
-
-sub write_grub_config {
- my ($prefix, $lilo, $fstab, $hds) = @_;
- my %dev2bios = (
- (map_index { $_ => "fd$::i" } detect_devices::floppies_dev()),
- (map_index { $_ => "hd$::i" } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot})),
- );
-
- {
- my %bios2dev = reverse %dev2bios;
- output "$prefix/boot/grub/device.map",
- join '', map { "($_) /dev/$bios2dev{$_}\n" } sort keys %bios2dev;
- }
- my $bootIsReiser = isThisFs("reiserfs", fsedit::get_root($fstab, 'boot'));
- my $file2grub = sub {
- my ($part, $file) = fsedit::file2part($prefix, $fstab, $_[0], 'keep_simple_symlinks');
- dev2grub($part->{device}, \%dev2bios) . $file;
- };
- {
- local *F;
- local $\ = "\n";
- my $f = "$prefix/boot/grub/menu.lst";
- open F, ">$f" or die "cannot create grub config file: $f";
- log::l("writing grub config to $f");
-
- $lilo->{$_} and print F "$_ $lilo->{$_}" foreach qw(timeout);
-
- print F "color black/cyan yellow/cyan";
- print F "i18n ", $file2grub->("/boot/grub/messages");
- print F "keytable ", $file2grub->($lilo->{keytable}) if $lilo->{keytable};
- print F "serial --unit=$1 --speed=$2\nterminal --timeout=" . ($lilo->{timeout} || 0) . " console serial" if get_append($lilo, 'console') =~ /ttyS(\d),(\d+)/;
-
- #- since we use notail in reiserfs, altconfigfile is broken :-(
- unless ($bootIsReiser) {
- print F "altconfigfile ", $file2grub->(my $once = "/boot/grub/menu.once");
- output "$prefix$once", " " x 100;
- }
-
- map_index {
- print F "default $::i" if $_->{label} eq $lilo->{default};
- } @{$lilo->{entries}};
-
- foreach (@{$lilo->{entries}}) {
- print F "\ntitle $_->{label}";
-
- if ($_->{type} eq "image") {
- my $vga = $_->{vga} || $lilo->{vga};
- printf F "kernel %s root=%s %s%s%s\n",
- $file2grub->($_->{kernel_or_dev}),
- $_->{root} =~ /loop7/ ? "707" : $_->{root}, #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
- $_->{append},
- $_->{'read-write'} && " rw",
- $vga && $vga ne "normal" && " vga=$vga";
- print F "initrd ", $file2grub->($_->{initrd}) if $_->{initrd};
- } else {
- print F "root ", dev2grub($_->{kernel_or_dev}, \%dev2bios);
- if ($_->{kernel_or_dev} !~ /fd/) {
- #- boot off the second drive, so reverse the BIOS maps
- $_->{mapdrive} ||= { '0x80' => '0x81', '0x81' => '0x80' }
- if $_->{table} && ($lilo->{first_hd_device} || $lilo->{boot}) !~ /$_->{table}/;
-
- map_each { print F "map ($::b) ($::a)" } %{$_->{mapdrive} || {}};
-
- print F "makeactive";
- }
- print F "chainloader +1";
- }
- }
- }
- my $hd = fsedit::get_root($fstab, 'boot')->{rootDevice};
-
- my $dev = dev2grub($lilo->{first_hd_device} || $lilo->{boot}, \%dev2bios);
- my ($s1, $s2, $m) = map { $file2grub->("/boot/grub/$_") } qw(stage1 stage2 menu.lst);
- my $f = "/boot/grub/install.sh";
- output "$prefix$f",
-"grub --device-map=/boot/grub/device.map --batch <<EOF
-install $s1 d $dev $s2 p $m
-quit
-EOF
-";
-
- output "$prefix/boot/grub/messages", map { substr(translate($_) . "\n", 0, 78) } ( #- ensure the translated messages are not too big the hard way
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Welcome to GRUB the operating system chooser!"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Use the %c and %c keys for selecting which entry is highlighted."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Press enter to boot the selected OS, \'e\' to edit the"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("commands before booting, or \'c\' for a command-line."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("The highlighted entry will be booted automatically in %d seconds."),
-);
-
- my $e = "$prefix/boot/.enough_space";
- output $e, 1; -s $e or die _("not enough room in /boot");
- unlink $e;
- $f;
-}
-
-sub install_grub {
- my ($prefix, $lilo, $fstab, $hds) = @_;
-
- my $f = write_grub_config($prefix, $lilo, $fstab, $hds);
-
- log::l("Installing boot loader...");
- $::testing and return;
- symlink "$prefix/boot", "/boot";
- run_program::run_or_die("sh", $f);
- unlink "$prefix/tmp/.error.grub", "/boot";
-}
-
-sub lnx4win_file {
- my $lilo = shift;
- map { local $_ = $_; s,/,\\,g; "$lilo->{boot_drive}:\\lnx4win$_" } @_;
-}
-
-sub loadlin_cmd {
- my ($prefix, $lilo) = @_;
- my $e = get_label("linux", $lilo) || first(grep { $_->{type} eq "image" } @{$lilo->{entries}});
-
- cp_af("$prefix$e->{kernel_or_dev}", "$prefix/boot/vmlinuz") unless -e "$prefix/boot/vmlinuz";
- cp_af("$prefix$e->{initrd}", "$prefix/boot/initrd.img") unless -e "$prefix/boot/initrd.img";
-
- $e->{label}, sprintf"%s %s initrd=%s root=%s $e->{append}",
- lnx4win_file($lilo, "/loadlin.exe", "/boot/vmlinuz", "/boot/initrd.img"),
- $e->{root} =~ /loop7/ ? "0707" : $e->{root}; #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-}
-
-sub install_loadlin {
- my ($prefix, $lilo, $fstab) = @_;
-
- my $boot;
- ($boot) = grep { $lilo->{boot} eq "/dev/$_->{device}" } @$fstab;
- ($boot) = grep { loopback::carryRootLoopback($_) } @$fstab unless $boot && $boot->{device_windobe};
- ($boot) = grep { isFat($_) } @$fstab unless $boot && $boot->{device_windobe};
- log::l("loadlin device is $boot->{device} (windobe $boot->{device_windobe})");
- $lilo->{boot_drive} = $boot->{device_windobe};
-
- my ($winpart) = grep { $_->{device_windobe} eq 'C' } @$fstab;
- log::l("winpart is $winpart->{device}");
- my $winhandle = any::inspect($winpart, $prefix, 'rw');
- my $windrive = $winhandle->{dir};
- log::l("windrive is $windrive");
-
- my ($label, $cmd) = loadlin_cmd($prefix, $lilo);
-
- #install_loadlin_config_sys($lilo, $windrive, $label, $cmd);
- #install_loadlin_desktop($lilo, $windrive);
-
- output "/initrd/loopfs/lnx4win/linux.bat", unix2dos(
-'@echo off
-echo Mandrake Linux
-smartdrv /C
-' . "$cmd\n");
-
-}
-
-sub install_loadlin_config_sys {
- my ($lilo, $windrive, $label, $cmd) = @_;
-
- my $config_sys = "$windrive/config.sys";
- local $_ = cat_($config_sys);
- output "$windrive/config.mdk", $_ if $_;
-
- my $timeout = $lilo->{timeout} || 1;
-
- $_ = "
-[Menu]
-menuitem=Windows
-menudefault=Windows,$timeout
-
-[Windows]
-" . $_ if !/^\Q[Menu]/m;
-
- #- remove existing entry
- s/^menuitem=$label\s*//mi;
- s/\n\[$label\].*?(\n\[|$)/$1/si;
-
- #- add entry
- s/(.*\nmenuitem=[^\n]*)/$1\nmenuitem=$label/s;
-
- $_ .= "
-[$label]
-shell=$cmd
-";
- output $config_sys, unix2dos($_);
-}
-
-sub install_loadlin_desktop {
- my ($lilo, $windrive) = @_;
- my $windir = lc(cat_("$windrive/msdos.sys") =~ /^WinDir=.:\\(\S+)/m ? $1 : "windows");
-
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#-PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
- foreach (__("Desktop"),
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
- __("Start Menu")) {
- my $d = "$windrive/$windir/" . translate($_);
- -d $d or $d = "$windrive/$windir/$_";
- -d $d or log::l("can't find windows $d directory"), next;
- output "$d/Linux4Win.url", unix2dos(sprintf
-q([InternetShortcut]
-URL=file:\lnx4win\lnx4win.exe
-WorkingDirectory=%s
-IconFile=%s
-IconIndex=0
-), lnx4win_file($lilo, "/", "/lnx4win.ico"));
- }
-}
-
-
-sub install {
- my ($prefix, $lilo, $fstab, $hds) = @_;
-
- if (my ($p) = grep { $lilo->{boot} =~ /\Q$_->{device}/ } @$fstab) {
- die _("You can't install the bootloader on a %s partition\n", partition_table::type2fs($p))
- if isThisFs('xfs', $p);
- }
- $lilo->{keytable} = keytable($prefix, $lilo->{keytable});
-
- if (exists $lilo->{methods}{grub}) {
- #- when lilo is selected, we don't try to install grub.
- #- just create the config file in case it may be useful
- eval { write_grub_config($prefix, $lilo, $fstab, $hds) };
- }
-
- my %l = grep_each { $::b } %{$lilo->{methods}};
- my @rcs = map {
- c::is_secure_file('/tmp/.error') or die "can't ensure a safe /tmp/.error";
- my $f = $bootloader::{"install_$_"} or die "unknown bootloader method $_";
- eval { $f->(@_) };
- $@;
- } reverse sort keys %l; #- reverse sort for having grub installed after lilo if both are there.
-
- return if grep { !$_ } @rcs; #- at least one worked?
- die first(map { $_ } @rcs);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/bootlook.pm b/perl-install/bootlook.pm
deleted file mode 100644
index 8747db249..000000000
--- a/perl-install/bootlook.pm
+++ /dev/null
@@ -1,321 +0,0 @@
-#!/usr/bin/perl -w
-
-# Control-center
-
-# Copyright (C) 2001 MandrakeSoft
-# Yves Duret <yduret at mandrakesoft.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-
-use MDK::Common;
-use Gtk;
-use Config;
-init Gtk;
-use POSIX;
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use standalone;
-use any;
-use bootloader;
-use fs;
-use my_gtk qw(:helpers :wrappers :ask);
-
-$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~/--embedded (\S*) (\S*)/;
-if ($::isEmbedded) {
- print "EMBED\n";
- print "XID : $::XID\n";
- print "CCPID : $::CCPID\n";
-}
-
-my $in = 'interactive'->vnew('su', 'default');
-local $_ = join '', @ARGV;
-
-/-h/ and die _("no help implemented yet.\n");
-/-version/ and die 'version: $Id$'."\n";
-
-my @winm;
-my @usernames;
-parse_etc_passwd();
-
-my $x_mode = isXlaunched();
-my $a_mode = (-e "/etc/aurora/Monitor") ? 1 : 0;
-my $l_mode = isAutologin();
-my %auto_mode = get_autologin("");
-my $inmain = 0;
-my $lilogrub = chomp_(`detectloader -q`);
-
-my $window = $::isEmbedded ? new Gtk::Plug ($::XID) : new Gtk::Window ("toplevel");
-$window->signal_connect(delete_event => sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) });
-$window->set_title(_("Boot Style Configuration") );
-$window->border_width(2);
-#$window->realize;
-
-# drakX mode
-my ($t_pixmap, $t_mask) = gtkcreate_png("tradi.png");
-my ($h_pixmap, $h_mask) = gtkcreate_png("hori.png");
-my ($v_pixmap, $v_mask) = gtkcreate_png("verti.png");
-my ($g_pixmap, $g_mask) = gtkcreate_png("gmon.png");
-my ($c_pixmap, $c_mask) = gtkcreate_png("categ.png");
-
-# a pixmap widget to contain the pixmap
-my $pixmap = new Gtk::Pixmap($h_pixmap, $h_mask);
-
-### menus definition
-# the menus are not shown
-# but they provides shiny shortcut like C-q
-my @menu_items = ( { path => _("/_File"), type => '<Branch>' },
- { path => _("/File/_Quit"), accelerator => _("<control>Q"), callback => sub { $::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0) } },
- );
-my $menubar = get_main_menu( $window );
-######### menus end
-
-my $user_combo = new Gtk::Combo;
-$user_combo->set_popdown_strings(@usernames);
-$user_combo->entry->set_text($auto_mode{autologin}) if ($auto_mode{autologin});
-my $desktop_combo =new Gtk::Combo;
-$desktop_combo->set_popdown_strings(get_wm());
-$desktop_combo->entry->set_text($auto_mode{desktop}) if ($auto_mode{desktop});
-my $a_c_button = new Gtk::RadioButton (_("NewStyle Categorizing Monitor"));
-my $a_h_button = new Gtk::RadioButton _("NewStyle Monitor"), $a_c_button;
-my $a_v_button = new Gtk::RadioButton _("Traditional Monitor"), $a_c_button;
-my $a_g_button = new Gtk::RadioButton _("Traditional Gtk+ Monitor"),$a_c_button ;
-my $a_button = new Gtk::CheckButton(_("Launch Aurora at boot time"));
-my $a_box = new Gtk::VBox(0, 0);
-my $x_box = new Gtk::VBox(0, 0);
-my $disp_mode = arch() =~ /ppc/ ? _("Yaboot mode") : _("Lilo/grub mode");
-gtkadd($window,
- gtkpack__ (my $global_vbox = new Gtk::VBox(0,0),
- gtkadd (new Gtk::Frame ("$disp_mode"),
-# gtkpack__(new Gtk::VBox(0,0),
- (gtkpack_(gtkset_border_width(new Gtk::HBox(0, 0),5),
- 1,_("You are currently using %s as your boot manager.
-Click on Configure to launch the setup wizard.", $lilogrub),
- 0,gtksignal_connect(new Gtk::Button (_("Configure")), clicked => $::lilo_choice),
- )),
-# "" #we need some place under the button -- replaced by gtkset_border_width( for the moment
-# )
-
- ),
- # aurora
-# gtkadd (new Gtk::Frame (_("Boot mode")),
-# gtkpack__ (new Gtk::HBox(0,0),
-# gtkpack__ (new Gtk::VBox(0, 5),
-# gtksignal_connect ($a_button, clicked => sub {
-# if ($inmain) {
-# $a_box->set_sensitive(!$a_mode);
-# $a_mode = !$a_mode;
-# if ($a_mode) {
-# $pixmap->set($c_pixmap, $c_mask) if $a_c_button->get_active();
-# $pixmap->set($h_pixmap, $h_mask) if $a_h_button->get_active();
-# $pixmap->set($v_pixmap, $v_mask) if $a_v_button->get_active();
-# $pixmap->set($g_pixmap, $g_mask) if $a_g_button->get_active();
-# } else {
-# $pixmap->set($t_pixmap, $t_mask);
-# }
-# }
-# }),
-# gtkpack__ ( gtkset_sensitive ($a_box, $a_mode),
-# gtksignal_connect ($a_c_button,clicked => sub{$pixmap->set($c_pixmap, $c_mask)}),
-# gtksignal_connect ($a_h_button,clicked => sub{$pixmap->set($h_pixmap, $h_mask)}),
-# gtksignal_connect ($a_v_button,clicked => sub{$pixmap->set($v_pixmap, $v_mask)}),
-# gtksignal_connect ($a_g_button,clicked => sub{$pixmap->set($g_pixmap, $g_mask)})
-# )
-# ),
-# gtkpack__ (new Gtk::HBox(0,0), $pixmap)
-# )
-# ),
- # X
- gtkadd (new Gtk::Frame (_("System mode")),
- gtkpack__ (new Gtk::VBox(0, 5),
- gtksignal_connect(gtkset_active(new Gtk::CheckButton (_("Launch the graphical environment when your system starts")), $x_mode ), clicked => sub {
- $x_box->set_sensitive(!$x_mode);
- $x_mode = !$x_mode;
- }),
- gtkpack__ (gtkset_sensitive ($x_box, $x_mode),
- gtkset_active($x_no_button = new Gtk::RadioButton (_("No, I don't want autologin")), !$l_mode),
- gtkpack__ (new Gtk::HBox(0, 10),
- gtkset_active($x_yes_button = new Gtk::RadioButton((_("Yes, I want autologin with this (user, desktop)")), $x_no_button), $l_mode),
- gtkpack__ (new Gtk::VBox(0, 10),
- $user_combo,
- $desktop_combo
- )
- )
- )
- )
- ),
- gtkadd (gtkset_layout(new Gtk::HButtonBox,-end),
- gtksignal_connect(new Gtk::Button (_("OK")), clicked=>sub{updateInit();updateAutologin();updateAurora();$::isEmbedded ? kill(USR1,$::CCPID) : Gtk->exit(0)}),
- gtksignal_connect(new Gtk::Button (_("Cancel")), clicked => sub {$::isEmbedded ? kill(USR1, $::CCPID) : Gtk->exit(0)})
- )
- )
- );
-
-$a_button->set_active($a_mode); # up == false == "0"
-if ($a_mode) {
- my $a = readlink "/etc/aurora/Monitor";
- $a =~ s#/lib/aurora/Monitors/##;
- if ($a eq "NewStyle-Categorizing-WsLib") {$a_c_button->set_active(1); $pixmap->set($c_pixmap, $c_mask);}
- if ($a eq "NewStyle-WsLib") {$a_h_button->set_active(1); $pixmap->set($h_pixmap, $h_mask);}
- if ($a eq "Traditional-WsLib") {$a_v_button->set_active(1); $pixmap->set($v_pixmap, $v_mask);}
- if ($a eq "Traditional-Gtk+") {$a_g_button->set_active(1); $pixmap->set($g_pixmap, $g_mask);}
-} else {
- $pixmap->set($t_pixmap, $t_mask);
-}
-
-$window->show_all();
-Gtk->main_iteration while Gtk->events_pending;
-$::isEmbedded and kill USR2, $::CCPID;
-$inmain=1;
-Gtk->main;
-Gtk->exit(0);
-
-#-------------------------------------------------------------
-# get user names to put in combo
-#-------------------------------------------------------------
-
-sub parse_etc_passwd
-{
- my ($uname, $uid);
- setpwent();
- do {
- @user_info = getpwent();
- ($uname, $uid) = @user_info[0,2];
- push (@usernames, $uname) if ($uid > 500) and !($uname eq "nobody");
- } while (@user_info);
-}
-
-sub get_wm
-{
- @winm = (split (' ', `/usr/sbin/chksession -l`));
-}
-
-#-------------------------------------------------------------
-# menu callback functions
-#-------------------------------------------------------------
-
-sub print_hello {
- print( "mcdtg !\n" );
-}
-
-sub get_main_menu {
- my ( $window ) = @_;
-
- my $accel_group = new Gtk::AccelGroup();
- my $item_factory = new Gtk::ItemFactory( 'Gtk::MenuBar', '<main>', $accel_group );
- $item_factory->create_items( @menu_items );
- $window->add_accel_group( $accel_group );
- return ( $item_factory->get_widget( '<main>' ) );
-}
-
-#-------------------------------------------------------------
-# launch X functions
-#-------------------------------------------------------------
-
-sub isXlaunched {
- my $line;
- open INITTAB, "/etc/inittab" or die _("can not open /etc/inittab for reading: %s", $!);
- while (<INITTAB>) {
- if (/id:([1-6]):initdefault:/) { $line = $_; last; }
- }
- close INITTAB;
- $line =~ s/id:([1-6]):initdefault:/$1/;
- return ($line-3);
-}
-
-sub updateInit {
- my $runlevel = ($x_mode) ? 5 : 3;
- substInFile { s/^id:\d:initdefault:\s*$/id:$runlevel:initdefault:\n/ } "/etc/inittab";
-}
-
-#-------------------------------------------------------------
-# aurora functions
-#-------------------------------------------------------------
-
-
-
-sub updateAurora {
- if ($a_mode) {
- if ($a_c_button->get_active()) {
- symlinkf("/lib/aurora/Monitors/NewStyle-Categorizing-WsLib", "/etc/aurora/Monitor");
- $in->do_pkgs->install(q(Aurora-Monitor-NewStyle-Categorizing-WsLib)) if !(-e "/lib/aurora/Monitors/NewStyle-Categorizing-WsLib");
- }
- if ($a_h_button->get_active()) {
- symlinkf("/lib/aurora/Monitors/NewStyle-WsLib", "/etc/aurora/Monitor");
- $in->do_pkgs->install(q(Aurora-Monitor-NewStyle-WsLib)) if !(-e "/lib/aurora/Monitors/NewStyle-WsLib");
- }
- if ($a_v_button->get_active()) {
- symlinkf("/lib/aurora/Monitors/Traditional-WsLib", "/etc/aurora/Monitor");
- $in->do_pkgs->install(q(Aurora-Monitor-Traditional-WsLib)) if !(-e "/lib/aurora/Monitors/Traditional-WsLib");
- }
- if ($a_g_button->get_active()) {
- symlinkf("/lib/aurora/Monitors/Traditional-Gtk+", "/etc/aurora/Monitor");
- $in->do_pkgs->install(q(Aurora-Monitor-Traditional-Gtk+)) if !(-e "/lib/aurora/Monitors/Traditional-Gtk+");
- }
- } else {
- unlink "/etc/aurora/Monitor";
- }
-
-}
-
-#-------------------------------------------------------------
-# launch autologin functions
-#-------------------------------------------------------------
-
-sub isAutologin {
- my $line;
- open AUTOLOGIN, "/etc/sysconfig/autologin";
- while (<AUTOLOGIN>) {
- if (/AUTOLOGIN=(yes|no)/) { $line = $_; last; }
- }
- close AUTOLOGIN;
- $line =~ s/AUTOLOGIN=(yes|no)/$1/;
- chomp ($line);
- $line = ($line eq "yes");
- my %au = get_autologin('');
- return ($line && defined $au{autologin});
-}
-
-sub get_autologin {
- my ($prefix) = @_;
- my %o;
- my %l = getVarsFromSh("$prefix/etc/sysconfig/autologin");
-
- $o{autologin} = $l{USER};
- %l = getVarsFromSh("$prefix/etc/sysconfig/desktop");
- $o{desktop} = $l{DESKTOP};
- %o;
-}
-
-sub updateAutologin {
- my ($usern,$deskt)=($user_combo->entry->get_text(), $desktop_combo->entry->get_text());
- if ($x_yes_button->get_active()) {
- $in->do_pkgs->install('autologin') if $x_mode;
- set_autologin('',$usern,$deskt);
- } else {
- set_autologin('',undef) if ($x_no_button->get_active());
- }
-}
-
-sub set_autologin {
- my ($prefix, $user, $desktop) = @_;
- output "$prefix/etc/sysconfig/desktop", uc($desktop), "\n" if $user;
- setVarsInSh("$prefix/etc/sysconfig/autologin",
- { USER => $user, AUTOLOGIN => bool2yesno($user), EXEC => "/usr/X11R6/bin/startx" });
- chmod 0600, "$prefix/etc/sysconfig/autologin";
-# log::l("cat $prefix/etc/sysconfig/autologin: ", cat_("$prefix/etc/sysconfig/autologin"));
-}
-
-
diff --git a/perl-install/c.pm b/perl-install/c.pm
deleted file mode 100644
index aa03b9b1e..000000000
--- a/perl-install/c.pm
+++ /dev/null
@@ -1,19 +0,0 @@
-package c; # $Id$
-
-use vars qw($AUTOLOAD);
-
-use c::stuff;
-use MDK::Common;
-
-sub AUTOLOAD {
- $AUTOLOAD =~ /::(.*)/;
- my @l = eval { &{$c::stuff::{$1}} };
- if (my $err = $@) {
- $err =~ /Undefined subroutine &main::/ ?
- die("can't find function $AUTOLOAD\n" . backtrace()) :
- die($err);
- }
- wantarray ? @l : $l[0];
-}
-
-1;
diff --git a/perl-install/c/.cvsignore b/perl-install/c/.cvsignore
deleted file mode 100644
index 665b57e54..000000000
--- a/perl-install/c/.cvsignore
+++ /dev/null
@@ -1,9 +0,0 @@
-Makefile
-Makefile_c
-stuff.c
-stuff.bs
-pm_to_blib
-Makefile_c.old
-blib
-stuff.xs
-pcmcia_probe.c
diff --git a/perl-install/c/Makefile b/perl-install/c/Makefile
deleted file mode 100644
index e58cab335..000000000
--- a/perl-install/c/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-.PHONY: clean
-
-C_RPM = 1
-C_DRAKX = 1
-
-stuff: %: %.xs
- test -e Makefile_c || C_RPM=$(C_RPM) C_DRAKX=$(C_DRAKX) perl Makefile.PL
- $(MAKE) -f Makefile_c LD_RUN_PATH=
- rm -f ../auto/c ; ln -s ../c/blib/arch/auto ../auto/c
-
-clean:
- test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
- rm -f *~ *.o stuff.xs pcmcia_probe.c
-
-stuff.xs: %: %.pm
- rm -f $@
- C_RPM=$(C_RPM) C_DRAKX=$(C_DRAKX) perl $< > $@
- chmod a-w $@
diff --git a/perl-install/c/Makefile.PL b/perl-install/c/Makefile.PL
deleted file mode 100644
index 9a27c3592..000000000
--- a/perl-install/c/Makefile.PL
+++ /dev/null
@@ -1,23 +0,0 @@
-use ExtUtils::MakeMaker;
-use Config;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-my $libs = '-lldetect -lext2fs';
-$libs .= ' -L/usr/X11R6/lib -lX11 -lgdk -lXxf86misc' if $ENV{C_DRAKX};
-$libs .= ' -lrpm -lrpmdb -lrpmio -lpopt -lz' if $ENV{C_RPM};
-
-my $pcmcia_dir = $ENV{C_DRAKX} && $Config{archname} =~ /i.86/ ? '../../mdk-stage1/pcmcia_' : '';
-
-symlink "$pcmcia_dir/probe.c", "probe.c" if $pcmcia_dir;
-
-WriteMakefile(
- 'NAME' => 'stuff',
- 'OPTIMIZE' => '-Os',
- 'MAKEFILE' => 'Makefile_c',
- 'OBJECT' => "stuff.o smp.o sbus.o silo.o" . ($pcmcia_dir && " probe.o"),
- 'VERSION_FROM' => 'stuff.pm', # finds $VERSION
- 'LIBS' => [$libs], # e.g., '-lm'
- 'DEFINE' => '', # e.g., '-DHAVE_SOMETHING'
- 'INC' => "-I/usr/include/rpm `gtk-config --cflags` `glib-config --cflags`" . ($pcmcia_dir && " -I$pcmcia_dir -I$pcmcia_dir/.."),
-);
diff --git a/perl-install/c/README b/perl-install/c/README
deleted file mode 100644
index b5ad1224f..000000000
--- a/perl-install/c/README
+++ /dev/null
@@ -1,3 +0,0 @@
-md5.c, md5_crypt.c and md5.h are taken from pam (dir modules/pam_pwdb)
-
-smp.c is taken from RedHat's install
diff --git a/perl-install/c/sbus.c b/perl-install/c/sbus.c
deleted file mode 100644
index 85d44fa79..000000000
--- a/perl-install/c/sbus.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* This file is inspired from source code of kudzu from Red Hat, Inc.
- * It has been modified to keep only "what is needed" in C, the prom_walk
- * has been rewritten in perl for convenience :-)
- *
- * Copyright notice from original version.
- * sbus.c: Probe for Sun SBUS and UPA framebuffers using OpenPROM,
- * SBUS SCSI and Ethernet cards and SBUS or EBUS audio chips.
- *
- * Copyright (C) 1998, 1999 Jakub Jelinek (jj@ultra.linux.cz)
- * (C) 1999 Red Hat, Inc.
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- */
-
-#ifdef __sparc__
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-
-static char *promdev = "/dev/openprom";
-static int promfd = -1;
-static int prom_current_node;
-#define MAX_PROP 128
-#define MAX_VAL (4096-128-4)
-static char buf[4096];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-int prom_open()
-{
- int prom_root_node;
-
- if (promfd == -1) {
- promfd = open(promdev, O_RDONLY);
- if (promfd == -1)
- return 0;
- }
- prom_root_node = prom_getsibling(0);
- if (!prom_root_node) {
- close(promfd);
- promfd = -1;
- return 0;
- }
- return prom_root_node;
-}
-
-void prom_close()
-{
- if (promfd != -1) {
- close(promfd);
- promfd = -1;
- }
-}
-
-int prom_getsibling(int node)
-{
- DECL_OP(sizeof(int));
-
- if (node == -1) return 0;
- *(int *)op->oprom_array = node;
- if (ioctl (promfd, OPROMNEXT, op) < 0)
- return 0;
- prom_current_node = *(int *)op->oprom_array;
- return *(int *)op->oprom_array;
-}
-
-int prom_getchild(int node)
-{
- DECL_OP(sizeof(int));
-
- if (!node || node == -1) return 0;
- *(int *)op->oprom_array = node;
- if (ioctl (promfd, OPROMCHILD, op) < 0)
- return 0;
- prom_current_node = *(int *)op->oprom_array;
- return *(int *)op->oprom_array;
-}
-
-char *prom_getopt(char *var, int *lenp)
-{
- DECL_OP(MAX_VAL);
-
- strcpy (op->oprom_array, var);
- if (ioctl (promfd, OPROMGETOPT, op) < 0)
- return 0;
- if (lenp) *lenp = op->oprom_size;
- return op->oprom_array;
-}
-
-void prom_setopt(char *var, char *value) {
- DECL_OP(MAX_VAL);
-
- strcpy (op->oprom_array, var);
- strcpy (op->oprom_array + strlen (var) + 1, value);
- ioctl (promfd, OPROMSETOPT, op);
-}
-
-char *prom_getproperty(char *prop, int *lenp)
-{
- DECL_OP(MAX_VAL);
-
- strcpy (op->oprom_array, prop);
- if (ioctl (promfd, OPROMGETPROP, op) < 0)
- return 0;
- if (lenp) *lenp = op->oprom_size;
- return op->oprom_array;
-}
-
-int prom_getbool(char *prop)
-{
- DECL_OP(0);
-
- *(int *)op->oprom_array = 0;
- for (;;) {
- op->oprom_size = MAX_PROP;
- if (ioctl(promfd, OPROMNXTPROP, op) < 0)
- return 0;
- if (!op->oprom_size)
- return 0;
- if (!strcmp (op->oprom_array, prop))
- return 1;
- }
-}
-
-int prom_pci2node(int bus, int devfn) {
- DECL_OP(2*sizeof(int));
-
- ((int *)op->oprom_array)[0] = bus;
- ((int *)op->oprom_array)[1] = devfn;
- if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
- return 0;
- prom_current_node = *(int *)op->oprom_array;
- return *(int *)op->oprom_array;
-}
-
-#else
-int prom_open() { return 0; }
-void prom_close() {}
-int prom_getsibling(int node) { return 0; }
-int prom_getchild(int node) { return 0; }
-char *prom_getopt(char *var, int *lenp) { return 0; /* NULL */ }
-void prom_setopt(char *var, char *value) {}
-char *prom_getproperty(char *prop, int *lenp) { return 0; /* NULL */ }
-int prom_getbool(char *prop) { return 0; }
-int prom_pci2node(int bus, int devfn) { return 0; }
-#endif /* __sparc__ */
diff --git a/perl-install/c/silo.c b/perl-install/c/silo.c
deleted file mode 100644
index 2fd621f4e..000000000
--- a/perl-install/c/silo.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/* silo.c: Conversions between SCSI and IDE disk names
- * and OpenPROM fully qualified paths.
- *
- * Modified for DrakX light integration.
- * Copyright (C) 1999, 2000 Jakub Jelinek <jakub@redhat.com>
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __sparc__
-
-#define _GNU_SOURCE
-#include <fcntl.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-#include <ctype.h>
-#include <dirent.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-
-#ifndef OPROMSETCUR
-#define OPROMSETCUR 0x20004FF0
-#define OPROMPCI2NODE 0x20004FF1
-#define OPROMPATH2NODE 0x20004FF2
-#endif
-
-static int hasaliases;
-static char *promdev = "/dev/openprom";
-static int promfd;
-static char sd_targets[10] = "31204567";
-static int p1275 = 0;
-static int prom_root_node, prom_current_node;
-static int promvers;
-static void (*prom_walk_callback)(int node);
-static char prom_path[1024];
-#define MAX_PROP 128
-#define MAX_VAL (4096-128-4)
-static char buf[4096];
-static char regstr[40];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-static int
-prom_setcur(int node) {
- DECL_OP(sizeof(int));
-
- if (node == -1) return 0;
- *(int *)op->oprom_array = node;
- if (ioctl (promfd, OPROMSETCUR, op) < 0)
- return 0;
- prom_current_node = *(int *)op->oprom_array;
- return *(int *)op->oprom_array;
-}
-
-static int
-prom_getsibling(int node) {
- DECL_OP(sizeof(int));
-
- if (node == -1) return 0;
- *(int *)op->oprom_array = node;
- if (ioctl (promfd, OPROMNEXT, op) < 0)
- return 0;
- prom_current_node = *(int *)op->oprom_array;
- return *(int *)op->oprom_array;
-}
-
-static int
-prom_getchild(int node) {
- DECL_OP(sizeof(int));
-
- if (!node || node == -1) return 0;
- *(int *)op->oprom_array = node;
- if (ioctl (promfd, OPROMCHILD, op) < 0)
- return 0;
- prom_current_node = *(int *)op->oprom_array;
- return *(int *)op->oprom_array;
-}
-
-static char *
-prom_getproperty(char *prop, int *lenp) {
- DECL_OP(MAX_VAL);
-
- strcpy (op->oprom_array, prop);
- if (ioctl (promfd, OPROMGETPROP, op) < 0)
- return 0;
- if (lenp) *lenp = op->oprom_size;
- return op->oprom_array;
-}
-
-static char *
-prom_getopt(char *var, int *lenp) {
- DECL_OP(MAX_VAL);
-
- strcpy (op->oprom_array, var);
- if (ioctl (promfd, OPROMGETOPT, op) < 0)
- return 0;
- if (lenp) *lenp = op->oprom_size;
- return op->oprom_array;
-}
-
-static void
-prom_setopt(char *var, char *value) {
- DECL_OP(MAX_VAL);
-
- strcpy (op->oprom_array, var);
- strcpy (op->oprom_array + strlen (var) + 1, value);
- ioctl (promfd, OPROMSETOPT, op);
-}
-
-static int
-prom_getbool(char *prop) {
- DECL_OP(0);
-
- *(int *)op->oprom_array = 0;
- for (;;) {
- op->oprom_size = MAX_PROP;
- if (ioctl(promfd, OPROMNXTPROP, op) < 0)
- return 0;
- if (!op->oprom_size)
- return 0;
- if (!strcmp (op->oprom_array, prop))
- return 1;
- }
-}
-
-static int
-prom_pci2node(int bus, int devfn) {
- DECL_OP(2*sizeof(int));
-
- ((int *)op->oprom_array)[0] = bus;
- ((int *)op->oprom_array)[1] = devfn;
- if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
- return 0;
- prom_current_node = *(int *)op->oprom_array;
- return *(int *)op->oprom_array;
-}
-
-static int
-prom_path2node(char *path) {
- DECL_OP(MAX_VAL);
-
- strcpy (op->oprom_array, path);
- if (ioctl (promfd, OPROMPATH2NODE, op) < 0)
- return 0;
- prom_current_node = *(int *)op->oprom_array;
- return *(int *)op->oprom_array;
-}
-
-#define PW_TYPE_SBUS 1
-#define PW_TYPE_PCI 2
-#define PW_TYPE_EBUS 3
-
-static void
-prom_walk(char *path, int parent, int node, int type) {
- int nextnode;
- int len, ntype = type;
- char *prop;
-
- prop = prom_getproperty("name", &len);
- if (prop && len > 0) {
- if ((!strcmp(prop, "sbus") || !strcmp(prop, "sbi")) && !type)
- ntype = PW_TYPE_SBUS;
- else if (!strcmp(prop, "ebus") && type == PW_TYPE_PCI)
- ntype = PW_TYPE_EBUS;
- else if (!strcmp(prop, "pci") && !type)
- ntype = PW_TYPE_PCI;
- }
- *path = '/';
- strcpy (path + 1, prop);
- prop = prom_getproperty("reg", &len);
- if (prop && len >= 4) {
- unsigned int *reg = (unsigned int *)prop;
- int cnt = 0;
- if (!p1275 || (type == PW_TYPE_SBUS))
- sprintf (regstr, "@%x,%x", reg[0], reg[1]);
- else if (type == PW_TYPE_PCI) {
- if ((reg[0] >> 8) & 7)
- sprintf (regstr, "@%x,%x", (reg[0] >> 11) & 0x1f, (reg[0] >> 8) & 7);
- else
- sprintf (regstr, "@%x", (reg[0] >> 11) & 0x1f);
- } else if (len == 4)
- sprintf (regstr, "@%x", reg[0]);
- else {
- unsigned int regs[2];
-
- /* Things get more complicated on UPA. If upa-portid exists,
- then address is @upa-portid,second-int-in-reg, otherwise
- it is @first-int-in-reg/16,second-int-in-reg (well, probably
- upa-portid always exists, but just to be safe). */
- memcpy (regs, reg, sizeof(regs));
- prop = prom_getproperty("upa-portid", &len);
- if (prop && len == 4) {
- reg = (unsigned int *)prop;
- sprintf (regstr, "@%x,%x", reg[0], regs[1]);
- } else
- sprintf (regstr, "@%x,%x", regs[0] >> 4, regs[1]);
- }
- for (nextnode = prom_getchild(parent); nextnode; nextnode = prom_getsibling(nextnode)) {
- prop = prom_getproperty("name", &len);
- if (prop && len > 0 && !strcmp (path + 1, prop))
- cnt++;
- }
- if (cnt > 1)
- strcat (path, regstr);
- }
-
- prom_walk_callback(node);
-
- nextnode = prom_getchild(node);
- if (nextnode)
- prom_walk(strchr (path, 0), node, nextnode, ntype);
- nextnode = prom_getsibling(node);
- if (nextnode)
- prom_walk(path, parent, nextnode, type);
-}
-
-static int
-prom_init(int mode) {
- struct utsname u;
-
- promfd = open(promdev, mode);
- if (promfd == -1)
- return -1;
- prom_root_node = prom_getsibling(0);
- if (!prom_root_node)
- return -1;
-
- if (!uname (&u) && !strcmp (u.machine, "sparc64"))
- p1275 = 1;
- return 0;
-}
-
-#define SDSK_TYPE_IDE 1
-#define SDSK_TYPE_SD 2
-#define SDSK_TYPE_PLN 3
-#define SDSK_TYPE_FC 4
-
-static struct sdsk_disk {
- unsigned int prom_node;
- unsigned int type, host, hi, mid, lo;
- unsigned char *prom_name;
-} *hd = NULL, *sd = NULL;
-static int hdlen, sdlen;
-
-static void
-scan_walk_callback(int node) {
- int nextnode;
- char *prop;
- int len, disk;
- static int v0ctrl = 0;
-
- for (disk = 0; disk < hdlen + sdlen; disk++) {
- if (hd[disk].prom_node == node) {
- switch (hd[disk].type) {
- case SDSK_TYPE_IDE:
- for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
- prop = prom_getproperty("name", &len);
- if (prop && len > 0 && (!strcmp (prop, "ata") || !strcmp (prop, "disk")))
- break;
- }
- if (!nextnode)
- continue;
- if (prop[0] == 'a')
- sprintf (prop, "/ata@%x,0/cmdk@%x,0", hd[disk].hi, hd[disk].lo);
- else
- sprintf (prop, "/disk@%x,0", hd[disk].hi * 2 + hd[disk].lo);
- break;
- case SDSK_TYPE_SD:
- for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
- prop = prom_getproperty("compatible", &len);
- if (prop && len > 0 && !strcmp (prop, "sd"))
- break;
- prop = prom_getproperty("name", &len);
- if (prop && len > 0 && (!strcmp (prop, "sd") || !strcmp (prop, "disk")))
- break;
- }
- if (!nextnode || hd[disk].hi)
- continue;
- if (promvers) {
- char name[1024];
- prop = prom_getproperty("name", &len);
- if (prop && len > 0)
- strcpy (name, prop);
- else
- strcpy (name, "sd");
- if (!prop)
- prop = ((struct openpromio *)buf)->oprom_array;
- sprintf (prop, "/%s@%x,%x", name, hd[disk].mid, hd[disk].lo);
- } else {
- int i;
- for (i = 0; sd_targets[i]; i++)
- if (sd_targets[i] == '0' + hd[disk].mid)
- break;
- if (!sd_targets[i])
- i = hd[disk].mid;
- sprintf (prop, "sd(%d,%d,", v0ctrl, i);
- }
- break;
- case SDSK_TYPE_PLN:
- prop = ((struct openpromio *)buf)->oprom_array;
- sprintf (prop, "/SUNW,pln@%x,%x/SUNW,ssd@%x,%x",
- hd[disk].lo & 0xf0000000, hd[disk].lo & 0xffffff,
- hd[disk].hi, hd[disk].mid);
- break;
- case SDSK_TYPE_FC:
- prop = ((struct openpromio *)buf)->oprom_array;
- sprintf (prop, "/sf@0,0/ssd@w%08x%08x,%x", hd[disk].hi, hd[disk].mid, hd[disk].lo);
- break;
- default:
- continue;
- }
- hd[disk].prom_name = malloc (strlen (prom_path) + strlen(prop) + 3);
- if (!hd[disk].prom_name)
- continue;
- if (promvers)
- strcpy (hd[disk].prom_name, prom_path);
- else
- hd[disk].prom_name[0] = '\0';
- strcat (hd[disk].prom_name, prop);
- }
- }
- v0ctrl++;
-}
-
-static int
-scan_ide(void) {
- DIR * dir;
- char path[80];
- char buffer[512];
- int fd, i, disk;
- struct dirent * ent;
- int pci_bus, pci_devfn;
-
- if (access("/proc/ide", R_OK)) return 0;
-
- if (!(dir = opendir("/proc/ide"))) {
- return 1;
- }
-
- while ((ent = readdir(dir))) {
- if (ent->d_name[0] == 'h' && ent->d_name[1] == 'd' &&
- ent->d_name[2] >= 'a' && ent->d_name[2] <= 'z' &&
- ent->d_name[3] == '\0') {
- disk = ent->d_name[2] - 'a';
- if (disk >= hdlen) {
- hd = (struct sdsk_disk *)realloc(hd, ((disk&~3)+4)*sizeof(struct sdsk_disk));
- memset (hd + hdlen, 0, ((disk&~3)+4-hdlen)*sizeof(struct sdsk_disk));
- hdlen = (disk&~3)+4;
- }
- for (i = (disk & ~3); i <= (disk | 3); i++) {
- if (hd[i].type)
- break;
- }
- if (i > (disk | 3)) {
- sprintf(path, "/proc/ide/%s", ent->d_name);
- if (readlink(path, buffer, 512) < 5)
- continue;
- if (strncmp(buffer, "ide", 3) ||
- !isdigit(buffer[3]) ||
- buffer[4] != '/')
- continue;
- buffer[4] = 0;
- sprintf(path, "/proc/ide/%s/config", buffer);
- if ((fd = open(path, O_RDONLY)) < 0)
- continue;
- i = read(fd, buffer, 50);
- close(fd);
- if (i < 50) continue;
- if (sscanf (buffer, "pci bus %x device %x ",
- &pci_bus, &pci_devfn) != 2)
- continue;
- hd[disk].prom_node = prom_pci2node (pci_bus, pci_devfn);
- } else
- hd[disk].prom_node = hd[i].prom_node;
- hd[disk].type = SDSK_TYPE_IDE;
- hd[disk].hi = (disk & 2) >> 1;
- hd[disk].lo = (disk & 1);
- }
- }
-
- closedir(dir);
-
- return 0;
-}
-
-static int
-scan_scsi(void) {
- FILE *f;
- DIR * dir, *dirhba;
- struct dirent * ent, *enthba;
- struct stat st;
- char * p, * q;
- char buf[512];
- char path[128];
- int disk = 0;
- int host, channel, id, lun;
- int prom_node, pci_bus, pci_devfn;
-
- if (access("/proc/scsi/scsi", R_OK)) {
- return 0;
- }
-
- f = fopen("/proc/scsi/scsi", "r");
- if (f == NULL) return 1;
-
- if (fgets(buf, sizeof(buf), f) == NULL) {
- fclose(f);
- return 1;
- }
- if (!strcmp(buf, "Attached devices: none\n")) {
- fclose(f);
- return 0;
- }
-
- while (fgets(buf, sizeof(buf), f) != NULL) {
- if (sscanf(buf, "Host: scsi%d Channel: %d Id: %d Lun: %d\n",
- &host, &channel, &id, &lun) != 4)
- break;
- if (fgets(buf, sizeof(buf), f) == NULL)
- break;
- if (strncmp(buf, " Vendor:", 9))
- break;
- if (fgets(buf, sizeof(buf), f) == NULL)
- break;
- if (strncmp(buf, " Type: ", 10))
- break;
- if (!strncmp(buf+10, "Direct-Access", 13)) {
- if (disk >= sdlen) {
- hd = (struct sdsk_disk *)
- realloc(hd, (hdlen+(disk&~3)+4)*sizeof(struct sdsk_disk));
- sd = hd + hdlen;
- memset (sd + sdlen, 0,
- ((disk&~3)+4-sdlen)*sizeof(struct sdsk_disk));
- sdlen = (disk&~3)+4;
- }
- sd[disk].type = SDSK_TYPE_SD;
- sd[disk].host = host;
- sd[disk].hi = channel;
- sd[disk].mid = id;
- sd[disk].lo = lun;
- disk++;
- }
- }
- fclose (f);
-
- if (!(dir = opendir("/proc/scsi"))) {
- if (!hdlen && hd) {
- free(hd);
- hd = NULL;
- }
- sd = NULL;
- sdlen = 0;
- return 1;
- }
-
- while ((ent = readdir(dir))) {
- if (!strcmp (ent->d_name, "scsi") || ent->d_name[0] == '.')
- continue;
- sprintf (path, "/proc/scsi/%s", ent->d_name);
- if (stat (path, &st) < 0 || !S_ISDIR (st.st_mode))
- continue;
- if (!(dirhba = opendir(path)))
- continue;
-
- while ((enthba = readdir(dirhba))) {
- if (enthba->d_name[0] == '.')
- continue;
- host = atoi(enthba->d_name);
- sprintf (path, "/proc/scsi/%s/%s", ent->d_name, enthba->d_name);
- f = fopen (path, "r");
- if (f == NULL) continue;
-
- if (!strcmp (ent->d_name, "esp") ||
- !strcmp (ent->d_name, "qlogicpti") ||
- !strcmp (ent->d_name, "fcal"))
- p = "PROM node";
- else if (!strcmp (ent->d_name, "pluto"))
- p = "serial ";
- else
- p = "PCI bus";
- while (fgets (buf, sizeof(buf), f) != NULL) {
- q = strstr (buf, p);
- if (q == NULL) continue;
- prom_node = 0;
- switch (p[1]) {
- case 'R':
- if (sscanf (q, "PROM node %x", &prom_node) == 1)
- q = NULL;
- break;
- case 'e':
- if (sscanf (q, "serial 000000%x %*dx%*d on soc%*d port %x PROM node %x",
- &id, &lun, &prom_node) == 3 &&
- lun >= 10 && lun <= 11) {
- q = NULL;
- }
- break;
- case 'C':
- if (sscanf (q, "PCI bus %x device %x", &pci_bus, &pci_devfn) == 2) {
- q = NULL;
- prom_node = prom_pci2node (pci_bus, pci_devfn);
- }
- break;
- }
- if (q == NULL) {
- for (disk = 0; disk < sdlen; disk++)
- if (sd[disk].host == host && sd[disk].type) {
- sd[disk].prom_node = prom_node;
- if (p[1] == 'e') {
- sd[disk].type = SDSK_TYPE_PLN;
- sd[disk].lo = (lun << 28) | id;
- } else if (!strcmp (ent->d_name, "fcal"))
- sd[disk].type = SDSK_TYPE_FC;
- }
- }
- }
- if (!strcmp (ent->d_name, "fcal")) {
- while (fgets (buf, sizeof(buf), f) != NULL) {
- unsigned long long ll;
- if (sscanf (buf, " [AL-PA: %*x, Id: %d, Port WWN: %Lx, Node WWN: ", &id, &ll) == 2) {
- for (disk = 0; disk < sdlen; disk++)
- if (sd[disk].host == host && sd[disk].mid == id) {
- sd[disk].hi = ll >> 32;
- sd[disk].mid = ll;
- }
- }
- }
- }
- fclose(f);
- }
- closedir(dirhba);
- }
- closedir(dir);
- return 0;
-}
-
-static int get_prom_ver(void)
-{
- FILE *f = fopen ("/proc/cpuinfo","r");
- int ver = 0;
- char buffer[1024];
- char *p;
-
- if (f) {
- while (fgets (buffer, 1024, f)) {
- if (!strncmp (buffer, "promlib", 7)) {
- p = strstr (buffer, "Version ");
- if (p) {
- p += 8;
- if (*p == '0' || (*p >= '2' && *p <= '3')) {
- ver = *p - '0';
- }
- }
- break;
- }
- }
- fclose(f);
- }
- if (!ver) {
- int len;
- p = prom_getopt("sd-targets", &len);
- if (p && len > 0 && len <= 8)
- strcpy(sd_targets, p);
- }
- return ver;
-}
-
-static void check_aliases(void) {
- int nextnode, len;
- char *prop;
- hasaliases = 0;
- for (nextnode = prom_getchild(prom_root_node); nextnode; nextnode = prom_getsibling(nextnode)) {
- prop = prom_getproperty("name", &len);
- if (prop && len > 0 && !strcmp (prop, "aliases"))
- hasaliases = 1;
- }
-}
-
-char *prom_root_name = NULL;
-
-static void get_root_name(void) {
- int len;
- char *prop;
-
- prom_getsibling(0);
- prop = prom_getproperty("name", &len);
- if (prop && len > 0)
- prom_root_name = strdup(prop);
-}
-
-int init_sbusdisk(void) {
- if (prom_init(O_RDONLY))
- return -1;
- promvers = get_prom_ver();
- check_aliases();
- get_root_name();
- scan_ide();
- scan_scsi();
- prom_walk_callback = scan_walk_callback;
- prom_walk(prom_path, prom_root_node, prom_getchild (prom_root_node), 0);
- close(promfd);
- return 0;
-}
-
-void set_prom_vars(char *linuxAlias, char *bootDevice) {
- int len;
- int aliasDone = 0;
- if (prom_init(O_RDWR))
- return;
- if (linuxAlias && hasaliases) {
- char *use_nvramrc;
- char nvramrc[2048];
- char *p, *q, *r, *s;
- int enabled = -1;
- int count;
-
- use_nvramrc = prom_getopt ("use-nvramrc?", &len);
- if (len > 0) {
- if (!strcasecmp (use_nvramrc, "false"))
- enabled = 0;
- else if (!strcasecmp (use_nvramrc, "true"))
- enabled = 1;
- }
- if (enabled != -1) {
- p = prom_getopt ("nvramrc", &len);
- if (p) {
- memcpy (nvramrc, p, len);
- nvramrc [len] = 0;
- q = nvramrc;
- for (;;) {
- /* If there is already `devalias linux /some/ugly/prom/path'
- make sure we fully understand that and remove it. */
- if (!strncmp (q, "devalias", 8) && (q[8] == ' ' || q[8] == '\t')) {
- for (r = q + 9; *r == ' ' || *r == '\t'; r++);
- if (!strncmp (r, "linux", 5)) {
- for (s = r + 5; *s && *s != ' ' && *s != '\t'; s++);
- if (!*s) break;
- if (s == r + 5 ||
- (r[5] == '#' && r[6] >= '0' && r[6] <= '9' &&
- (s == r + 7 ||
- (r[7] >= '0' && r[7] <= '9' && s == r + 8)))) {
- for (r = s + 1; *r == ' ' || *r == '\t'; r++);
- for (; *r && *r != ' ' && *r != '\t' && *r != '\n'; r++);
- for (; *r == ' ' || *r == '\t'; r++);
- if (*r == '\n') {
- r++;
- memmove (q, r, strlen(r) + 1);
- continue;
- }
- }
- }
- }
- q = strchr (q, '\n');
- if (!q) break;
- q++;
- }
- len = strlen (nvramrc);
- if (len && nvramrc [len-1] != '\n')
- nvramrc [len++] = '\n';
- p = nvramrc + len;
- p = stpcpy (p, "devalias linux ");
- r = linuxAlias;
- q = strchr (r, ';');
- count = 1;
- while (q) {
- memcpy (p, r, q - r);
- p += q - r;
- sprintf (p, "\ndevalias linux#%d ", count++);
- p = strchr (p, 0);
- r = q + 1;
- q = strchr (r, ';');
- }
- p = stpcpy (p, r);
- *p++ = '\n';
- *p = 0;
- prom_setopt ("nvramrc", nvramrc);
- if (!enabled)
- prom_setopt ("use-nvramrc?", "true");
- aliasDone = 1;
- }
- }
- }
- if (bootDevice) {
- char *p;
- if (aliasDone)
- bootDevice = "linux";
- p = prom_getopt ("boot-device", &len);
- if (p) {
- prom_setopt ("boot-device", bootDevice);
- prom_setopt ("boot-file", "");
- } else {
- p = prom_getopt ("boot-from", &len);
- if (p)
- prom_setopt ("boot-from", bootDevice);
- }
- }
- close(promfd);
-}
-
-#ifdef STANDALONE_SILO
-
-int main(void) {
- int i;
-
- init_sbusdisk();
- set_prom_vars ("/sbus@1f,0/espdma/esp/sd@1,0:c;/sbus@1f,0/espdma/esp/sd@1,0:g;/sbus@1f,0/espdma/esp/sd@1,0:h", "linux");
- printf ("prom root name `%s'\n", prom_root_name);
- for (i = 0; i < hdlen; i++) {
- if (hd[i].type)
- printf ("hd%c %x %d %d %d\n", i + 'a', hd[i].prom_node,
- hd[i].hi, hd[i].mid, hd[i].lo);
- if (hd[i].prom_name) printf ("%s\n", hd[i].prom_name);
- }
- for (i = 0; i < sdlen; i++) {
- if (sd[i].type) {
- if (i < 26)
- printf ("sd%c %x %d %d %d\n", i + 'a', sd[i].prom_node,
- sd[i].hi, sd[i].mid, sd[i].lo);
- else
- printf ("sd%c%c %x %d %d %d\n", (i / 26) + 'a' - 1, (i % 26) + 'a', sd[i].prom_node,
- sd[i].hi, sd[i].mid, sd[i].lo);
- }
- if (sd[i].prom_name) printf ("%s\n", sd[i].prom_name);
- }
- exit(0);
-}
-
-#else
-
-void
-initSilo ()
-{
- return init_sbusdisk();
-}
-
-char *
-disk2PromPath (unsigned char *disk)
-{
- static unsigned char prompath[1024];
- int diskno = -1, part;
-
- if (disk[0] == 'h' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
- diskno = disk[2] - 'a';
- disk += 3;
- } else if (disk[0] == 's' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
- if (disk[3] >= 'a' && disk[3] <= 'z') {
- diskno = (disk[2] - 'a' + 1) * 26 + (disk[3] - 'a');
- disk += 4;
- } else {
- diskno = disk[2] - 'a';
- disk += 3;
- }
- if (diskno >= 128)
- diskno = -1;
- else
- diskno += hdlen;
- }
- if (diskno == -1)
- part = -1;
- else if (!disk[0])
- part = 3;
- else {
- part = atoi (disk);
- if (part <= 0 || part > 8) part = -1;
- }
- if (diskno < 0 || part == -1 ||
- diskno >= hdlen + sdlen || !hd[diskno].prom_name) {
- return NULL;
- }
- if (!promvers)
- sprintf (prompath, "%s%d)", hd[diskno].prom_name, part ? part - 1 : 2);
- else {
- if (part)
- sprintf (prompath, "%s:%c", hd[diskno].prom_name, part + 'a' - 1);
- else
- strcpy (prompath, hd[diskno].prom_name);
- }
- return prompath;
-}
-
-int
-hasAliases (void)
-{
- return hasaliases;
-}
-
-char *
-promRootName (void)
-{
- return prom_root_name ? prom_root_name : "";
-}
-
-void
-setPromVars (char *linuxAlias, char *bootDevice)
-{
- if (linuxAlias && !*linuxAlias) linuxAlias = NULL;
- if (bootDevice && !*bootDevice) bootDevice = NULL;
- set_prom_vars (linuxAlias, bootDevice);
-}
-
-#endif
-
-#else
-void initSilo() {}
-char *disk2PromPath(unsigned char *disk) { return 0; /* NULL */ }
-int hasAliases(void) { return 0; }
-char *promRootName(void) { return 0; /* NULL */ }
-void setPromVars(char *linuxAlias, char *bootDevice) {}
-#endif /* __sparc__ */
diff --git a/perl-install/c/smp-test.c b/perl-install/c/smp-test.c
deleted file mode 100644
index f644449b8..000000000
--- a/perl-install/c/smp-test.c
+++ /dev/null
@@ -1,6 +0,0 @@
-main() {
- if (detectSMP())
- printf("has smp\n");
- else
- printf("no smp\n");
-}
diff --git a/perl-install/c/smp.c b/perl-install/c/smp.c
deleted file mode 100644
index baf786cc6..000000000
--- a/perl-install/c/smp.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
-[_Anarchy_(alan@lightning.swansea.uk.linux.org)] you should do one check
- though - if the board seems to be SMP and the CPU in /proc/cpuinfo is non
- intel dont install an SMP kernel - thats a dual pentium board with a cyrix
- or similar single cpu in it
-*/
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <string.h>
-#include <errno.h>
-
-#ifdef __alpha__
-int alphaDetectSMP(void)
-{
- int issmp = 0;
- FILE *f;
-
- f = fopen("/proc/cpuinfo", "r");
- if (f) {
- char buff[1024];
-
- while (fgets (buff, 1024, f) != NULL) {
- if (!strncmp (buff, "cpus detected\t\t: ", 17)) {
- if (strtoul (buff + 17, NULL, 0) > 1)
- issmp = 1;
- break;
- }
- }
- fclose(f);
- } else
- return -1;
-
- return issmp;
-}
-#endif /* __alpha__ */
-
-#ifdef __sparc__
-int sparcDetectSMP(void)
-{
- int issmp = 0;
- FILE *f;
-
- f = fopen("/proc/cpuinfo", "r");
- if (f) {
- char buff[1024];
-
- while (fgets (buff, 1024, f) != NULL) {
- if (!strncmp (buff, "ncpus probed\t: ", 15)) {
- if (strtoul (buff + 15, NULL, 0) > 1)
- issmp = 1;
- break;
- }
- }
- fclose(f);
- } else
- return -1;
-
- return issmp;
-}
-#endif /* __sparc__ */
-
-/* just a placeholder for now - don't have an SMP machine
- need something in place to build - s.benedict */
-
-#ifdef __powerpc__
-int ppcDetectSMP(void)
-{
- int issmp = 0;
- FILE *f;
-
- f = fopen("/proc/cpuinfo", "r");
- if (f) {
- char buff[1024];
-
- while (fgets (buff, 1024, f) != NULL) {
- if (!strncmp (buff, "ncpus active\t: ", 15)) {
- if (strtoul (buff + 15, NULL, 0) > 1)
- issmp = 1;
- break;
- }
- }
- fclose(f);
- } else
- return -1;
-
- return issmp;
-}
-#endif /* __powerpc__ */
-
-#ifdef __i386__
-/*
- * Copyright (c) 1996, by Steve Passe
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. The name of the developer may NOT be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $Id$
- */
-
-/*
- * mptable.c
- */
-
-#define VMAJOR 2
-#define VMINOR 0
-#define VDELTA 12
-
-/*
- * this will cause the raw mp table to be dumped to /tmp/mpdump
- *
-#define RAW_DUMP
- */
-
-#define MP_SIG 0x5f504d5f /* _MP_ */
-#define EXTENDED_PROCESSING_READY
-#define OEM_PROCESSING_READY_NOT
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/types.h>
-
-#define LINUX 1
-#if LINUX
-typedef unsigned int vm_offset_t;
-#else
-#include <machine/types.h>
-#endif
-
-/* EBDA is @ 40:0e in real-mode terms */
-#define EBDA_POINTER 0x040e /* location of EBDA pointer */
-
-/* CMOS 'top of mem' is @ 40:13 in real-mode terms */
-#define TOPOFMEM_POINTER 0x0413 /* BIOS: base memory size */
-
-#define DEFAULT_TOPOFMEM 0xa0000
-
-#define BIOS_BASE 0xf0000
-#define BIOS_BASE2 0xe0000
-#define BIOS_SIZE 0x10000
-#define ONE_KBYTE 1024
-
-#define GROPE_AREA1 0x80000
-#define GROPE_AREA2 0x90000
-#define GROPE_SIZE 0x10000
-
-/* MP Floating Pointer Structure */
-typedef struct MPFPS {
- char signature[ 4 ];
- void* pap;
- u_char length;
- u_char spec_rev;
- u_char checksum;
- u_char mpfb1;
- u_char mpfb2;
- u_char mpfb3;
- u_char mpfb4;
- u_char mpfb5;
-} mpfps_t;
-
-/* MP Configuration Table Header */
-typedef struct MPCTH {
- char signature[ 4 ];
- u_short base_table_length;
- u_char spec_rev;
- u_char checksum;
- u_char oem_id[ 8 ];
- u_char product_id[ 12 ];
- void* oem_table_pointer;
- u_short oem_table_size;
- u_short entry_count;
- void* apic_address;
- u_short extended_table_length;
- u_char extended_table_checksum;
- u_char reserved;
-} mpcth_t;
-
-typedef struct PROCENTRY {
- u_char type;
- u_char apicID;
- u_char apicVersion;
- u_char cpuFlags;
- u_long cpuSignature;
- u_long featureFlags;
- u_long reserved1;
- u_long reserved2;
-} ProcEntry;
-
-#define PROCENTRY_FLAG_EN 0x01
-
-static void seekEntry( vm_offset_t addr );
-static void apic_probe( vm_offset_t* paddr, int* where );
-static void readEntry( void* entry, int size );
-
-/* global data */
-static int pfd; /* physical /dev/mem fd */
-static int verbose = 0;
-static int grope = 0;
-
-static int
-readType()
-{
- u_char type;
-
- if ( read( pfd, &type, sizeof( u_char ) ) != sizeof( u_char ) ) {
- perror( "type read" );
- fprintf( stderr, "\npfd: %d", pfd );
- fflush( stderr );
- exit( 1 );
- }
-
- if ( lseek( pfd, -1, SEEK_CUR ) < 0 ) {
- perror( "type seek" );
- exit( 1 );
- }
-
- return (int)type;
-}
-
-static int intelDetectSMP(void)
-{
- vm_offset_t paddr;
- int where;
- mpfps_t mpfps;
- int rc = 0;
- int ncpus = 0;
-
- /* open physical memory for access to MP structures */
- if ( (pfd = open( "/dev/mem", O_RDONLY )) < 0 ) {
- return 0;
- }
-
- /* probe for MP structures */
- apic_probe( &paddr, &where );
- if ( where <= 0 )
- return 0;
-
- seekEntry( paddr );
- readEntry( &mpfps, sizeof( mpfps_t ) );
-
- if (mpfps.mpfb1)
- /* old style */
- rc = 1;
- else {
- /* go to the config table */
- mpcth_t cth;
- int count, i;
-
- paddr = (vm_offset_t) mpfps.pap;
- seekEntry( paddr );
- readEntry( &cth, sizeof( cth ) );
- /* if we don't have any entries, the kernel sure
- won't be able to set up mp. Needs at least one entry
- for smp kernel */
- if (cth.entry_count <= 1) {
- close (pfd);
- return 0;
- }
- count = cth.entry_count;
- for (i = 0; i < count; i++) {
- if ( readType() == 0 ) {
- ProcEntry entry;
- readEntry( &entry, sizeof( entry ) );
- if (entry.cpuFlags & PROCENTRY_FLAG_EN)
- ncpus++;
- }
- }
- if (ncpus > 1)
- rc = 1;
- }
-
- close (pfd);
- return rc;
-}
-
-/*
- * set PHYSICAL address of MP floating pointer structure
- */
-#define NEXT(X) ((X) += 4)
-static void
-apic_probe( vm_offset_t* paddr, int* where )
-{
- /*
- * c rewrite of apic_probe() by Jack F. Vogel
- */
-
- int x;
- u_short segment;
- vm_offset_t target;
- u_int buffer[ BIOS_SIZE / sizeof( int ) ];
-
- if ( verbose )
- printf( "\n" );
-
- /* search Extended Bios Data Area, if present */
- if ( verbose )
- printf( " looking for EBDA pointer @ 0x%04x, ", EBDA_POINTER );
- seekEntry( (vm_offset_t)EBDA_POINTER );
- readEntry( &segment, 2 );
- if ( segment ) { /* search EBDA */
- target = (vm_offset_t)segment << 4;
- if ( verbose )
- printf( "found, searching EBDA @ 0x%08x\n", target );
- seekEntry( target );
- readEntry( buffer, ONE_KBYTE );
-
- for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
- if ( buffer[ x ] == MP_SIG ) {
- *where = 1;
- *paddr = (x * sizeof( unsigned int )) + target;
- return;
- }
- }
- }
- else {
- if ( verbose )
- printf( "NOT found\n" );
- }
-
- /* read CMOS for real top of mem */
- seekEntry( (vm_offset_t)TOPOFMEM_POINTER );
- readEntry( &segment, 2 );
- --segment; /* less ONE_KBYTE */
- target = segment * 1024;
- if ( verbose )
- printf( " searching CMOS 'top of mem' @ 0x%08x (%dK)\n",
- target, segment );
- seekEntry( target );
- readEntry( buffer, ONE_KBYTE );
-
- for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
- if ( buffer[ x ] == MP_SIG ) {
- *where = 2;
- *paddr = (x * sizeof( unsigned int )) + target;
- return;
- }
- }
-
- /* we don't necessarily believe CMOS, check base of the last 1K of 640K */
- if ( target != (DEFAULT_TOPOFMEM - 1024)) {
- target = (DEFAULT_TOPOFMEM - 1024);
- if ( verbose )
- printf( " searching default 'top of mem' @ 0x%08x (%dK)\n",
- target, (target / 1024) );
- seekEntry( target );
- readEntry( buffer, ONE_KBYTE );
-
- for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
- if ( buffer[ x ] == MP_SIG ) {
- *where = 3;
- *paddr = (x * sizeof( unsigned int )) + target;
- return;
- }
- }
- }
-
- /* search the BIOS */
- if ( verbose )
- printf( " searching BIOS @ 0x%08x\n", BIOS_BASE );
- seekEntry( BIOS_BASE );
- readEntry( buffer, BIOS_SIZE );
-
- for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
- if ( buffer[ x ] == MP_SIG ) {
- *where = 4;
- *paddr = (x * sizeof( unsigned int )) + BIOS_BASE;
- return;
- }
- }
-
- /* search the extended BIOS */
- if ( verbose )
- printf( " searching extended BIOS @ 0x%08x\n", BIOS_BASE2 );
- seekEntry( BIOS_BASE2 );
- readEntry( buffer, BIOS_SIZE );
-
- for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
- if ( buffer[ x ] == MP_SIG ) {
- *where = 5;
- *paddr = (x * sizeof( unsigned int )) + BIOS_BASE2;
- return;
- }
- }
-
- if ( grope ) {
- /* search additional memory */
- target = GROPE_AREA1;
- if ( verbose )
- printf( " groping memory @ 0x%08x\n", target );
- seekEntry( target );
- readEntry( buffer, GROPE_SIZE );
-
- for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
- if ( buffer[ x ] == MP_SIG ) {
- *where = 6;
- *paddr = (x * sizeof( unsigned int )) + GROPE_AREA1;
- return;
- }
- }
-
- target = GROPE_AREA2;
- if ( verbose )
- printf( " groping memory @ 0x%08x\n", target );
- seekEntry( target );
- readEntry( buffer, GROPE_SIZE );
-
- for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
- if ( buffer[ x ] == MP_SIG ) {
- *where = 7;
- *paddr = (x * sizeof( unsigned int )) + GROPE_AREA2;
- return;
- }
- }
- }
-
- *where = 0;
- *paddr = (vm_offset_t)0;
-}
-
-
-/*
- *
- */
-static void
-seekEntry( vm_offset_t addr )
-{
- if ( lseek( pfd, (off_t)addr, SEEK_SET ) < 0 ) {
- return;
- perror( "/dev/mem seek" );
- exit( 1 );
- }
-}
-
-
-/*
- *
- */
-static void
-readEntry( void* entry, int size )
-{
- if ( read( pfd, entry, size ) != size ) {
- return;
- perror( "readEntry" );
- exit( 1 );
- }
-}
-
-
-#endif /* __i386__ */
-
-int detectSMP(void)
-{
- static int isSMP = -1;
-
- if (isSMP != -1)
- return isSMP;
-
-#ifdef __i386__
- return isSMP = intelDetectSMP();
-#elif __sparc__
- return isSMP = sparcDetectSMP();
-#elif __alpha__
- return isSMP = alphaDetectSMP();
-#elif __powerpc__
- return isSMP = ppcDetectSMP();
-#elif __ia64__
- /* TODO: Update to check against /proc/pal/cpuX */
- return isSMP = 1;
-#elif __x86_64__
- /* TODO: Update when SMP machines are there */
- return isSMP = 0;
-#else
- #error unknown architecture
-#endif
-}
-
-#if TEST
-int main() {
- if (detectSMP())
- printf("has smp\n");
- else
- printf("no smp\n");
-}
-#endif
diff --git a/perl-install/c/smp.h b/perl-install/c/smp.h
deleted file mode 100644
index 3255cc489..000000000
--- a/perl-install/c/smp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef SMP_H
-#define SMP_H
-
-int detectSMP(void);
-
-#endif /* SMP_H */
diff --git a/perl-install/c/stuff.pm b/perl-install/c/stuff.pm
deleted file mode 100644
index 918abee6c..000000000
--- a/perl-install/c/stuff.pm
+++ /dev/null
@@ -1,34 +0,0 @@
-package c::stuff; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-
-require DynaLoader;
-
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-
-bootstrap c::stuff $VERSION;
-
-sub from_utf8 { iconv($_[0], "utf-8", standard_charset()) }
-sub to_utf8 { iconv($_[0], standard_charset(), "utf-8") }
-
-sub headerGetEntry {
- my ($h, $q) = @_;
- $h or log::l("empty header in headerGetEntry"), return;
- $q eq 'name' and return headerGetEntry_string($h, RPMTAG_NAME());
- $q eq 'group' and return from_utf8(headerGetEntry_string($h, RPMTAG_GROUP()));
- $q eq 'version' and return headerGetEntry_string($h, RPMTAG_VERSION());
- $q eq 'release' and return headerGetEntry_string($h, RPMTAG_RELEASE());
- $q eq 'epoch' and return headerGetEntry_int($h, RPMTAG_EPOCH());
- $q eq 'summary' and return from_utf8(headerGetEntry_string($h, RPMTAG_SUMMARY()));
- $q eq 'description' and return from_utf8(headerGetEntry_string($h, RPMTAG_DESCRIPTION()));
- $q eq 'arch' and return headerGetEntry_string($h, RPMTAG_ARCH());
- $q eq 'size' and return headerGetEntry_int($h, RPMTAG_SIZE());
- $q eq 'obsoletes' and return headerGetEntry_string_list($h, RPMTAG_OBSOLETES());
- $q eq 'requires' and return headerGetEntry_string_list($h, RPMTAG_REQUIRENAME());
- $q eq 'fileflags' and return headerGetEntry_int_list($h, RPMTAG_FILEFLAGS());
- $q eq 'filenames' and return headerGetEntry_filenames($h);
-}
-
-1;
diff --git a/perl-install/class_discard.pm b/perl-install/class_discard.pm
deleted file mode 100644
index 7ecd1375b..000000000
--- a/perl-install/class_discard.pm
+++ /dev/null
@@ -1,11 +0,0 @@
-package class_discard; # $Id$
-
-use log;
-
-sub new { bless {}, "class_discard" }
-
-sub AUTOLOAD {
- log::l("class_discard: $AUTOLOAD called at ", caller);
-}
-
-1;
diff --git a/perl-install/commands b/perl-install/commands
deleted file mode 100755
index baa02f232..000000000
--- a/perl-install/commands
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/usr/bin/perl
-
-use diagnostics;
-use strict;
-
-use lib qw(/usr/bin/perl-install .);
-use common;
-use commands;
-
-my $progname = basename($0);
-
-# hack as some functions are defined by perl... so chmod -> chmod_
-&{$commands::{$progname} || $commands::{$progname . "_"} || \&err}(@ARGV), exit 0;
-
-sub err { die "$0: unknown program (unimplemented)\n"; }
diff --git a/perl-install/commands.pm b/perl-install/commands.pm
deleted file mode 100644
index 36b0297e5..000000000
--- a/perl-install/commands.pm
+++ /dev/null
@@ -1,587 +0,0 @@
-#-########################################################################
-#- This file implement many common shell commands:
-#- true, false, cat, which, dirname, basename, rmdir, lsmod, grep, tr,
-#- mount, umount, mkdir, mknod, ln, rm, chmod, chown, mkswap, swapon,
-#- swapoff, ls, cp, ps, dd, head, tail, strings, hexdump, more, insmod,
-#- modprobe, route, df, kill, lspci, lssbus, dmesg, sort, du,
-#-########################################################################
-package commands; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($printable_chars);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my $BUFFER_SIZE = 1024;
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub getopts {
- my $o = shift;
- my @r = map { '' } (@_ = split //, $_[0]);
- while (1) {
- local $_ = $o->[0];
- $_ && /^-/ or return @r;
- for (my $i = 0; $i < @_; $i++) { /$_[$i]/ and $r[$i] = $_[$i]; }
- shift @$o;
- }
- @r;
-}
-
-sub true { exit 0 }
-sub false { exit 1 }
-sub cat { @ARGV = @_; print while <> }
-sub which { ARG: foreach (@_) { foreach my $c (split /:/, $ENV{PATH}) { -x "$c/$_" and print("$c/$_\n"), next ARG; }}}
-sub dirname_ { print dirname(@_), "\n" }
-sub basename_ { print basename(@_), "\n" }
-sub rmdir_ { foreach (@_) { rmdir $_ or die "rmdir: can't remove $_\n" } }
-sub lsmod { print "Module Size Used by\n"; cat("/proc/modules"); }
-
-sub grep_ {
- my ($h, $v, $i) = getopts(\@_, qw(hvi));
- @_ == 0 || $h and die "usage: grep <regexp> [files...]\n";
- my $r = shift;
- $r = qr/$r/i if $i;
- @ARGV = @_; (/$r/ ? $v || print : $v && print) while <>;
-}
-
-sub tr_ {
- my ($s, $c, $d) = getopts(\@_, qw(s c d));
- @_ >= 1 + (!$d || $s) or die "usage: tr [-c] [-s [-d]] <set1> <set2> [files...]\n or tr [-c] -d <set1> [files...]\n";
- my $set1 = shift;
- my $set2; !$d || $s and $set2 = shift;
- @ARGV = @_;
- eval "(tr/$set1/$set2/$s$d$c, print) while <>";
-}
-
-sub mount {
- @_ or return cat("/proc/mounts");
- my ($t, $r) = getopts(\@_, qw(tr));
- my $fs = $t && shift;
-
- @_ == 2 or die "usage: mount [-r] [-t <fs>] <device> <dir>\n",
- " (use -r for readonly)\n",
- " (if /dev/ is left off the device name, a temporary node will be created)\n";
-
- my ($dev, $where) = @_;
- $fs ||= $where =~ /:/ ? "nfs" :
- $dev =~ /fd/ ? "vfat" : "ext2";
-
- require fs;
- require modules;
- modules::load_dependencies("/modules/modules.dep");
- fs::mount($dev, $where, $fs, $r);
-}
-
-sub umount {
- @_ == 1 or die "umount expects a single argument\n";
-
- require fs;
- fs::umount($_[0]);
-}
-
-sub mkdir_ {
- my ($rec) = getopts(\@_, qw(p));
- mkdir_p($_) foreach @_;
-}
-
-
-sub mknod {
- if (@_ == 1) {
- require devices;
- eval { devices::make($_[0]) }; $@ and die "mknod: failed to create $_[0]\n";
- } elsif (@_ == 4) {
- require c;
- my $mode = $ {{"b" => c::S_IFBLK(), "c" => c::S_IFCHR()}}{$_[1]} or die "unknown node type $_[1]\n";
- syscall_('mknod', my $a = $_[0], $mode | 0600, makedev($_[2], $_[3])) or die "mknod failed: $!\n";
- } else { die "usage: mknod <path> [b|c] <major> <minor> or mknod <path>\n"; }
-}
-
-sub ln {
- my ($force, $soft) = getopts(\@_, qw(fs));
- @_ >= 1 or die "usage: ln [-s] [-f] <source> [<dest>]\n";
-
- my ($source, $dest) = @_;
- $dest ||= basename($source);
-
- $force and unlink $dest;
-
- ($soft ? symlink($source, $dest) : link($source, $dest)) or die "ln failed: $!\n";
-}
-
-sub rm {
- my ($rec, undef) = getopts(\@_, qw(rf));
-
- my $rm; $rm = sub {
- foreach (@_) {
- if (!-l $_ && -d $_) {
- $rec or die "$_ is a directory\n";
- &$rm(glob_($_));
- rmdir $_ or die "can't remove directory $_: $!\n";
- } else { unlink $_ or die "rm of $_ failed: $!\n" }
- }
- };
- &$rm(@_);
-}
-
-sub chmod_ {
- @_ >= 2 or die "usage: chmod <mode> <files>\n";
-
- my $mode = shift;
- $mode =~ /^[0-7]+$/ or die "illegal mode $mode\n";
-
- foreach (@_) { chmod oct($mode), $_ or die "chmod failed $_: $!\n" }
-}
-
-sub chown_ {
- my ($rec, undef) = getopts(\@_, qw(r));
- local $_ = shift or die "usage: chown [-r] name[.group] <files>\n";
-
- my ($name, $group) = (split('\.'), $_);
-
- my ($uid, $gid) = (getpwnam($name) || $name, getgrnam($group) || $group);
-
- my $chown; $chown = sub {
- foreach (@_) {
- chown $uid, $gid, $_ or die "chown of file $_ failed: $!\n";
- -d $_ && $rec and &$chown(glob_($_));
- }
- };
- &$chown(@_);
-}
-
-sub mkswap {
- @_ == 1 or die "mkswap <device>\n";
- require swap;
- swap::enable($_[0], 0);
-}
-
-sub swapon {
- @_ == 1 or die "swapon <file>\n";
- require swap;
- swap::swapon($_[0]);
-}
-sub swapoff {
- @_ == 1 or die "swapoff <file>\n";
- require swap;
- swap::swapoff($_[0]);
-}
-
-sub uncpio {
- @_ and die "uncpio reads from stdin\n";
-
-# cpioInstallArchive(gzdopen(0, "r"), NULL, 0, NULL, NULL, &fail);
-}
-
-
-sub rights {
- my $r = '-' x 9;
- my @rights = (qw(x w r x w r x w r), ['t', 0], ['s', 3], ['s', 6]);
- for (my $i = 0; $i < @rights; $i++) {
- if (vec(pack("S", $_[0]), $i, 1)) {
- my ($val, $place) = $i >= 9 ? @{$rights[$i]} : ($rights[$i], $i);
- my $old = \substr($r, 8 - $place, 1);
- $$old = ($$old eq '-' && $i >= 9) ? uc $val : $val;
- }
- }
- my @types = split //, "_pc_d_b_-_l_s";
- $types[$_[0] >> 12 & 0xf] . $r;
-}
-
-sub displaySize {
- my $m = $_[0] >> 12;
- $m == 4 || $m == 8 || $m == 10;
-}
-
-sub ls {
- my ($l , $h) = getopts(\@_, qw(lh));
- $h and die "usage: ls [-l] <files...>\n";
-
- @_ or @_ = '.';
- @_ == 1 && -d $_[0] and @_ = glob_($_[0]);
- foreach (sort @_) {
- if ($l) {
- my @s = lstat or warn("can't stat file $_\n"), next;
- formline(
-"@<<<<<<<<< @<<<<<<< @<<<<<<< @>>>>>>>> @>>>>>>>>>>>>>>> @*\n",
- rights($s[2]), getpwuid $s[4] || $s[4], getgrgid $s[5] || $s[5],
- displaySize($s[2]) ? $s[7] : join(", ", unmakedev($s[6])),
- scalar localtime $s[9], -l $_ ? "$_ -> " . readlink $_ : $_);
- print $^A; $^A = '';
- } else { print "$_\n"; }
- }
-}
-sub cp {
- my ($force) = getopts(\@_, qw(f));
- @_ >= 2 or die "usage: cp [-f] <sources> <dest>\n(this cp does -Rl by default)\n";
-
- my $cp; $cp = sub {
- my $dest = pop @_;
-
- @_ or return;
- @_ == 1 || -d $dest or die "cp: copying multiple files, but last argument ($dest) is not a directory\n";
-
- foreach my $src (@_) {
- my $dest = $dest;
- -d $dest and $dest .= "/" . basename($src);
-
- if (-e $dest) {
- $force ? unlink $dest : die "file $dest already exist\n";
- }
-
- if (-d $src) {
- -d $dest or mkdir $dest, (stat($src))[2] or die "mkdir: can't create directory $dest: $!\n";
- &$cp(glob_($src), $dest);
- } elsif (-l $src) {
- unless (symlink((readlink($src) || die "readlink failed: $!"), $dest)) {
- my $msg = "symlink: can't create symlink $dest: $!\n";
- $force ? warn $msg : die $msg;
- }
- } else {
- local (*F, *G);
- open F, $src or die "can't open $src for reading: $!\n";
- open G, "> $dest" or $force or die "can't create $dest : $!\n";
- local $_;
- while (<F>) { print G $_ }
- chmod((stat($src))[2], $dest);
- }
- }
- };
- &$cp(@_);
-}
-
-sub ps {
- @_ and die "usage: ps\n";
- my ($pid, $rss, $cpu, $cmd);
- my ($uptime) = split ' ', first(cat_("/proc/uptime"));
- my $hertz = 100;
-
- require c;
- my $page = c::getpagesize() / 1024;
-
- open PS, ">&STDOUT";
- format PS_TOP =
- PID RSS %CPU CMD
-.
- format PS =
-@>>>> @>>>> @>>> @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-$pid, $rss, $cpu, $cmd
-.
- foreach $pid (sort {$a <=> $b} grep { /\d+/ } all('/proc')) {
- my @l = split(' ', cat_("/proc/$pid/stat"));
- $cpu = sprintf "%2.1f", max(0, min(99, ($l[13] + $l[14]) * 100 / $hertz / ($uptime - $l[21] / $hertz)));
- $rss = (split ' ', cat_("/proc/$pid/stat"))[23] * $page;
- (($cmd) = cat_("/proc/$pid/cmdline")) =~ s/\0/ /g;
- $cmd ||= (split ' ', (cat_("/proc/$pid/stat"))[0])[1];
- write PS;
- }
-}
-
-
-sub dd {
- my $u = "usage: dd [-h] [-p] [if=<file>] [of=<file>] [bs=<number>] [count=<number>]\n";
- my ($help, $percent) = getopts(\@_, qw(hp));
- die $u if $help;
- my %h = (if => *STDIN, of => *STDOUT, bs => 512, count => undef);
- foreach (@_) {
- /(.*?)=(.*)/ && exists $h{$1} or die $u;
- $h{$1} = $2;
- }
- local (*IF, *OF); my ($tmp, $nb, $read);
- ref $h{if} eq 'GLOB' ? *IF = $h{if} : sysopen(IF, $h{if}, 0 ) || die "error: can't open file $h{if}\n";
- ref $h{of} eq 'GLOB' ? *OF = $h{of} : sysopen(OF, $h{of}, 0x41) || die "error: can't open file $h{of}\n";
-
- $h{bs} = removeXiBSuffix($h{bs});
-
- for ($nb = 0; !$h{count} || $nb < $h{count}; $nb++) {
- printf "\r%02.1d%%", 100 * $nb / $h{count} if $h{count} && $percent;
- $read = sysread(IF, $tmp, $h{bs}) or $h{count} ? die "error: can't read block $nb\n" : last;
- syswrite(OF, $tmp) or die "error: can't write block $nb\n";
- $read < $h{bs} and $read = 1, last;
- }
- print STDERR "\r$nb+$read records in\n";
- print STDERR "$nb+$read records out\n";
-}
-
-sub head_tail {
- my ($h, $n) = getopts(\@_, qw(hn));
- $h || @_ < to_bool($n) and die "usage: $0 [-h] [-n lines] [<file>]\n";
- $n = $n ? shift : 10;
- local *F; @_ ? open(F, $_[0]) || die "error: can't open file $_[0]\n" : (*F = *STDIN);
-
- local $_;
- if ($0 eq 'head') {
- while (<F>) { $n-- or return; print }
- } else {
- @_ = (); while (<F>) { push @_, $_; @_ > $n and shift; }
- print @_;
- }
-}
-sub head { $0 = 'head'; &head_tail }
-sub tail { $0 = 'tail'; &head_tail }
-
-sub strings {
- my ($h, $o, $n) = getopts(\@_, qw(hon));
- $h and die "usage: strings [-o] [-n min-length] [<files>]\n";
- $n = $n ? shift : 4;
- $/ = "\0"; @ARGV = @_; my $l = 0; while (<>) {
- while (/[$printable_chars]{$n,}/og) {
- printf "%07d ", ($l + length $') if $o;
- print "$&\n" ;
- }
- $l += length;
- } continue { $l = 0 if eof }
-}
-
-sub hexdump {
- my $i = 0; $/ = \16; @ARGV = @_; while (<>) {
- printf "%08lX ", $i; $i += 16;
- print join(" ", (map { sprintf "%02X", $_ } unpack("C*", $_)),
- ($_ =~ s/[^$printable_chars]/./og, $_)[1]), "\n";
- }
-}
-
-sub more {
- @ARGV = @_;
- require devices;
- my $tty = devices::make('tty');
- local *IN; open IN, "<$tty" or die "can't open $tty\n";
- my $n = 0; while (<>) {
- if (++$n == 25) {
- my $v = <IN>;
- $v =~ /^q/ and exit 0;
- $n = 0;
- }
- print
- }
-}
-
-sub pack_ {
- my $t;
- foreach (@_) {
- if (-d $_) {
- pack_(glob_($_));
- } else {
- print -s $_, "\n";
- print $_, "\n";
-
- local *F;
- open F, $_ or die "can't read file $_: $!\n";
- while (read F, $t, $BUFFER_SIZE) { print $t; }
- }
- }
-}
-
-sub unpack_ {
- my $t;
- @_ == 1 or die "give me one and only one file to unpack\n";
- local *F;
- open F, $_[0] or die "can't open file $_: $!\n";
- while (1) {
- my $size = chomp_(scalar <F>);
- defined $size or last;
- $size =~ /^\d+$/ or die "bad format (can't find file size)\n";
- my $filename = chomp_(scalar <F>) or die "expecting filename\n";
-
- print "$filename\n";
- my $dir = dirname($filename);
- -d $dir or mkdir_p($dir);
-
- local *G;
- open G, "> $filename" or die "can't write file $filename: $!\n";
- while ($size) {
- $size -= read(F, $t, min($size, $BUFFER_SIZE)) || die "data for file $filename is missing\n";
- print G $t or die "error writing to file $filename: $!\n";
- }
- }
-}
-
-sub insmod {
- my ($h) = getopts(\@_, qw(h));
- $h || @_ == 0 and die "usage: insmod <module> [options]\n";
- my $f = local $_ = shift;
-
- require run_program;
-
- #- try to install the module if it exist else extract it from archive.
- #- needed for cardmgr.
- unless (-r $f) {
- $_ = $1 if m@.*/([^/]*)\.o@;
- unless (-r ($f = "/lib/modules/$_.o")) {
- $f = "/tmp/$_.o";
- my $cz = "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz"; -e $cz or $cz .= "2";
- if (-e $cz) {
- eval {
- require packdrake;
- my $packer = new packdrake($cz, quiet => 1);
- $packer->extract_archive("/tmp", "$_.o");
- };
- } elsif (-e "/lib/modules.cpio.bz2") {
- run_program::run("cd /tmp ; $ENV{LD_LOADER} bzip2 -cd /lib/modules.cpio.bz2 | $ENV{LD_LOADER} cpio -i $_.o");
- } else {
- die "unable to find an archive for modules";
- }
- }
- }
- -r $f or die "can't find module $_";
- run_program::run(["/usr/bin/insmod_", "insmod"], "-f", $f, @_) or die("insmod $_ failed");
- unlink $f;
-}
-
-sub modprobe {
- my ($h) = getopts(\@_, qw(h));
- $h || @_ == 0 and die "usage: modprobe <module> [options]\n";
- my $name = shift;
- require modules;
- modules::load_dependencies("/modules/modules.dep");
- modules::load([ $name, @_ ]);
-}
-
-sub route {
- @_ == 0 or die "usage: route\nsorry, no modification handled\n";
- my ($titles, @l) = cat_("/proc/net/route");
- my @titles = split ' ', $titles;
- my %l;
- open ROUTE, ">&STDOUT";
- format ROUTE_TOP =
-Destination Gateway Mask Iface
-.
- format ROUTE =
-@<<<<<<<<<<<< @<<<<<<<<<<<< @<<<<<<<<<<<< @<<<<<<<
-$l{Destination}, $l{Gateway}, $l{Mask}, $l{Iface}
-.
- foreach (@l) {
- /^\s*$/ and next;
- @l{@titles} = split;
- $_ = join ".", reverse map { hex } unpack "a2a2a2a2", $_ foreach @l{qw(Destination Gateway Mask)};
- $l{Destination} = 'default' if $l{Destination} eq "0.0.0.0";
- $l{Gateway} = '*' if $l{Gateway} eq "0.0.0.0";
- write ROUTE;
- }
-}
-
-sub df {
- my ($h) = getopts(\@_, qw(h));
- my ($dev, $size, $free, $used, $use, $mntpoint);
- open DF, ">&STDOUT";
- format DF_TOP =
-Filesystem Size Used Avail Use Mounted on
-.
- format DF =
-@<<<<<<<<<<<<<<<< @>>>>>>> @>>>>>>> @>>>>>>> @>>>>>% @<<<<<<<<<<<<<<<<<<<<<<<<<
-$dev, $size, $used, $free, $use, $mntpoint
-.
- my %h;
- foreach (cat_("/proc/mounts"), cat_("/etc/mtab")) {
- ($dev, $mntpoint) = split;
- $h{$dev} = $mntpoint;
- }
- foreach $dev (sort keys %h) {
- ($size, $free) = MDK::Common::System::df($mntpoint = $h{$dev});
- $size or next;
-
- $use = int (100 * ($size - $free) / $size);
- $used = $size - $free;
- if ($h) {
- $used = int ($used / 1024) . "M";
- $size = int ($size / 1024) . "M";
- $free = int ($free / 1024) . "M";
- }
- write DF if $size;
- }
-}
-
-sub kill {
- my $signal = 15;
- @_ or die "usage: kill [-<signal>] pids\n";
- $signal = (shift, $1)[1] if $_[0] =~ /^-(.*)/;
- kill $signal, @_ or die "kill failed: $!\n";
-}
-
-sub lspci {
- require detect_devices;
- print join "\n", detect_devices::stringlist(1), '';
-}
-*lssbus = *lspci;
-
-sub dmesg { print cat_("/tmp/syslog"); }
-
-sub sort {
- my ($n, $h) = getopts(\@_, qw(nh));
- $h and die "usage: sort [-n] [<file>]\n";
- local *F; @_ ? open(F, $_[0]) || die "error: can't open file $_[0]\n" : (*F = *STDIN);
- if ($n) {
- print sort { $a <=> $b } <F>;
- } else {
- print sort <F>;
- }
-}
-
-sub du {
- my ($s, $h) = getopts(\@_, qw(sh));
- $h || !$s and die "usage: du -s [<directories>]\n";
-
- my $f; $f = sub {
- my ($e) = @_;
- my $s = (lstat($e))[12];
- $s += sum(map { &$f($_) } glob_("$e/*")) if !-l $e && -d $e;
- $s;
- };
- print &$f($_) >> 1, "\t$_\n" foreach @_ ? @_ : glob_("*");
-}
-
-sub install_cpio($$;@) {
- my ($dir, $name, @more) = @_;
-
- return "$dir/$name" if -e "$dir/$name";
-
- my $cpio = "$dir.cpio.bz2";
- -e $cpio or return;
-
- eval { rm("-r", $dir) };
- mkdir $dir, 0755;
- require run_program;
-
- my $more = join " ", map { $_ && "$_ $_/*" } @more;
- run_program::run("cd $dir ; $ENV{LD_LOADER} bzip2 -cd $cpio | $ENV{LD_LOADER} cpio -id $name $name/* $more");
-
- "$dir/$name";
-}
-
-sub bug {
- my ($h) = getopts(\@_, "h");
- $h and die "usage: bug\nput file report.bug on fat formatted floppy\n";
-
- require detect_devices;
- mount devices::make(detect_devices::floppy()), "/fd0";
-
- require install_any;
- output("/fd0/report.bug", install_any::report_bug("/mnt")); #- no other way :-(
- umount "/fd0";
- common::sync();
-}
-
-sub loadkeys {
- my ($h) = getopts(\@_, "h");
- $h || @_ != 1 and die "usage: loadkeys <keyboard>\n";
-
- require keyboard;
- keyboard::setup($_[0]);
-}
-
-sub sync { common::sync() }
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
diff --git a/perl-install/common.pm b/perl-install/common.pm
deleted file mode 100644
index a673dce04..000000000
--- a/perl-install/common.pm
+++ /dev/null
@@ -1,186 +0,0 @@
-package common; # $Id$
-
-use MDK::Common;
-use MDK::Common::System;
-use diagnostics;
-use strict;
-use vars qw(@ISA @EXPORT $SECTORSIZE);
-
-@ISA = qw(Exporter);
-# no need to export ``_''
-@EXPORT = qw($SECTORSIZE __ translate untranslate formatXiB removeXiBSuffix formatTime setVirtual makedev unmakedev salt);
-
-# perl_checker: RE-EXPORT-ALL
-push @EXPORT, @MDK::Common::EXPORT;
-
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-$SECTORSIZE = 512;
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-
-sub _ {
- my $s = shift @_; my $t = translate($s);
- sprintf $t, @_;
-}
-sub __ { $_[0] }
-
-sub salt {
- my ($nb) = @_;
- require devices;
- local *F;
- open F, devices::make("random") or die "missing random";
- my $s; read F, $s, $nb;
- local $_ = pack "b8" x $nb, unpack "b6" x $nb, $s;
- tr [\0-\x3f] [0-9a-zA-Z./];
- $_;
-}
-
-sub makedev { ($_[0] << 8) | $_[1] }
-sub unmakedev { $_[0] >> 8, $_[0] & 0xff }
-
-sub translate {
- my ($s) = @_;
- $s ? c::dgettext('libDrakX', $s) : '';
-}
-
-sub untranslate {
- my $s = shift || return;
- foreach (@_) { translate($_) eq $s and return $_ }
- die "untranslate failed";
-}
-
-BEGIN { undef *availableRamMB }
-sub availableRamMB() {
- my $s = MDK::Common::System::availableRamMB();
- #- HACK HACK: if i810 and memsize
- require detect_devices;
- return $s - 1 if $s == 128 && grep { $_->{driver} =~ /i810/ } detect_devices::probeall();
- $s;
-}
-
-sub setVirtual {
- my $vt = '';
- local *C;
- sysopen C, "/dev/console", 2 or die "failed to open /dev/console: $!";
- ioctl(C, c::VT_GETSTATE(), $vt) or die "ioctl VT_GETSTATE failed";
- ioctl(C, c::VT_ACTIVATE(), $_[0]) or die "ioctl VT_ACTIVATE failed";
- ioctl(C, c::VT_WAITACTIVE(), $_[0]) or die "ioctl VT_WAITACTIVE failed";
- unpack "S", $vt;
-}
-
-
-sub removeXiBSuffix {
- local $_ = shift;
-
- /(\d+)\s*kB?$/i and return $1 * 1024;
- /(\d+)\s*MB?$/i and return $1 * 1024 * 1024;
- /(\d+)\s*GB?$/i and return $1 * 1024 * 1024 * 1024;
- /(\d+)\s*TB?$/i and return $1 * 1024 * 1024 * 1024 * 1024;
- $_;
-}
-sub formatXiB {
- my ($newnb, $newbase) = (@_, 1);
- my ($nb, $base);
- my $decr = sub {
- ($nb, $base) = ($newnb, $newbase);
- $base >= 1024 ? ($newbase = $base / 1024) : ($newnb = $nb / 1024);
- };
- foreach ('', _("KB"), _("MB"), _("GB")) {
- $decr->();
- if ($newnb < 1 && $newnb * $newbase < 1) {
- my $v = $nb * $base;
- my $s = $v < 10 && int(10 * $v - 10 * int($v));
- return int($v) . ($s ? ".$s" : '') . $_;
- }
- }
- int($newnb * $newbase) . _("TB");
-}
-
-sub formatTime {
- my ($s, $m, $h) = gmtime($_[0]);
- if ($h) {
- sprintf "%02d:%02d", $h, $m;
- } elsif ($m > 1) {
- _("%d minutes", $m);
- } elsif ($m == 1) {
- _("1 minute");
- } else {
- _("%d seconds", $s);
- }
-}
-
-sub usingRamdisk { scalar(grep { /ram3/ } cat_("/proc/mounts")) }
-
-sub expand_symlinks_but_simple {
- my ($f) = @_;
- my $link = readlink($f);
- my $f2 = expand_symlinks($f);
- if ($link && $link !~ m|/|) {
- # put back the last simple symlink
- $f2 =~ s|\Q$link\E$|basename($f)|e;
- }
- $f2
-}
-
-sub sync { &MDK::Common::System::sync }
-
-# Group the list by n. Returns a reference of lists of length n
-sub group_n_lm {
- my $n = shift;
- my @l;
- push @l, [ splice(@_, 0, $n) ] while (@_);
- @l
-}
-
-sub screenshot_dir__and_move {
- my ($dir1, $dir2) = ("$::o->{prefix}/root", '/tmp/stage2');
- if (-e $dir1) {
- if (-e "$dir2/DrakX-screenshots") {
- cp_af("$dir2/DrakX-screenshots", $dir1);
- rm_rf("$dir2/DrakX-screenshots");
- }
- $dir1;
- } else {
- $dir2;
- }
-}
-
-sub take_screenshot {
- my ($in) = @_;
- my $dir = screenshot_dir__and_move() . '/DrakX-screenshots';
- my $warn;
- if (!-e $dir) {
- mkdir $dir or $in->ask_warn('', _("Can't make screenshots before partitioning")), return;
- $warn = 1;
- }
- my $nb = 1;
- $nb++ while -e "$dir/$nb.png";
- system("fb2png /dev/fb0 $dir/$nb.png 0");
-
- $in->ask_warn('', _("Screenshots will be available after install in %s", "/root/DrakX-screenshots")) if $warn;
-}
-
-sub join_lines {
- my @l;
- my $s;
- foreach (@_) {
- if (/^\s/) {
- $s .= $_;
- } else {
- push @l, $s if $s;
- $s = $_;
- }
- }
- @l, if_($s, $s);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/crypto.pm b/perl-install/crypto.pm
deleted file mode 100644
index d4aabda4e..000000000
--- a/perl-install/crypto.pm
+++ /dev/null
@@ -1,165 +0,0 @@
-package crypto; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::System;
-use common;
-use log;
-use ftp;
-
-my %url2land = (
- fr => _("France"),
- cr => _("Costa Rica"),
- be => _("Belgium"),
- cz => _("Czech Republic"),
- de => _("Germany"),
- gr => _("Greece"),
- no => _("Norway"),
- se => _("Sweden"),
- nl => _("Netherlands"),
- it => _("Italy"),
- at => _("Austria"),
- );
-
-my %land2tzs = (
- _("France") => [ 'Europe/Paris', 'Europe/Brussels', 'Europe/Berlin' ],
- _("Belgium") => [ 'Europe/Brussels', 'Europe/Paris', 'Europe/Berlin' ],
- _("Czech Republic") => [ 'Europe/Prague', 'Europe/Berlin' ],
- _("Germany") => [ 'Europe/Berlin', 'Europe/Prague' ],
- _("Greece") => [ 'Europe/Athens', 'Europe/Prague' ],
- _("Norway") => [ 'Europe/Oslo', 'Europe/Stockholm' ],
- _("Sweden") => [ 'Europe/Stockholm', 'Europe/Oslo' ],
- _("United States") => [ 'America/New_York', 'Canada/Atlantic', 'Asia/Tokyo', 'Australia/Sydney', 'Europe/Paris' ],
- _("Netherlands") => [ 'Europe/Amsterdam', 'Europe/Brussels', 'Europe/Berlin' ],
- _("Italy") => [ 'Europe/Rome', 'Europe/Brussels', 'Europe/Paris' ],
- _("Austria") => [ 'Europe/Vienna', 'Europe/Brussels', 'Europe/Berlin' ],
- );
-
-my %static_mirrors = (
-# "ackbar" => [ "Ackbar", "/updates", "a", "a" ],
- );
-
-my %mirrors = ();
-
-my %deps = (
- 'libcrypto.so.0' => 'openssl',
- 'libssl.so.0' => 'openssl',
- 'mod_sxnet.so' => 'mod_ssl-sxnet',
-);
-
-sub require2package { $deps{$_[0]} || $_[0] }
-sub mirror2text { $mirrors{$_[0]} && ($mirrors{$_[0]}[0] . '|' . $_[0]) }
-
-sub mirrors {
- unless (keys %mirrors) {
- #- contact the following URL to retrieve list of mirror.
- #- http://www.linux-mandrake.com/mirrorsfull.list
- require http;
- my $f = http::getFile("http://www.linux-mandrake.com/mirrorsfull.list");
-
- local $SIG{ALRM} = sub { die "timeout" };
- alarm 60;
- foreach (<$f>) {
- my ($arch, $url, $dir) = m|updates([^:]*):ftp://([^/]*)(/\S*)| or next;
- MDK::Common::System::compat_arch($arch) or
- log::l("ignoring updates from $url because of incompatible arch: $arch"), next;
- my $land = _("United States");
- foreach (keys %url2land) {
- my $qu = quotemeta $_;
- $url =~ /\.$qu(?:\..*)?$/ and $land = $url2land{$_};
- }
- $mirrors{$url} = [ $land, $dir ];
- }
- http::getFile('/XXX'); #- close connection.
- alarm 0;
-
- #- now add static mirror (in case of something wrong happened above).
- add2hash(\%mirrors, \%static_mirrors);
- }
- keys %mirrors;
-}
-
-sub bestMirror {
- my ($string) = @_;
- my %mirror2value;
-
- foreach my $url (mirrors()) {
- my $value = 0;
- my $cvalue = mirrors();
-
- $mirror2value{$url} ||= 1 + $cvalue;
- foreach (@{$land2tzs{$mirrors{$url}[0]} || []}) {
- $_ eq $string and $mirror2value{$url} > $value and $mirror2value{$url} = $value;
- (split '/')[0] eq (split '/', $string)[0] and $mirror2value{$url} > $cvalue and $mirror2value{$url} = $cvalue;
- ++$value;
- }
- }
- my ($min_value) = sort { $a <=> $b } values %mirror2value;
-
- my @possible = grep { $mirror2value{$_} == $min_value } keys %mirror2value;
- push @possible, grep { $mirror2value{$_} == $min_value } keys %mirror2value;
- push @possible, grep { $mirror2value{$_} == 1 + $min_value } keys %mirror2value;
-
- $possible[rand @possible];
-}
-
-#- hack to retrieve Mandrake Linux version...
-sub version {
- require pkgs;
- my $pkg = pkgs::packageByName($::o->{packages}, 'mandrake-release');
- $pkg && $pkg->version || '8.2'; #- safe but dangerous ;-)
-}
-
-sub dir { $mirrors{$_[0]}[1] . '/' . version() }
-sub ftp($) { ftp::new($_[0], dir($_[0])) }
-
-sub getFile {
- my ($file, $host) = @_;
- $host ||= $crypto::host;
- my $dir = dir($host) . ($file =~ /\.rpm$/ && "/RPMS");
- log::l("getting crypto file $file on directory $dir with login $mirrors{$host}[2]");
- my ($ftp, $retr) = ftp::new($host, $dir,
- $mirrors{$host}[2] ? $mirrors{$host}[2] : (),
- $mirrors{$host}[3] ? $mirrors{$host}[3] : ()
- );
- $$retr->close if $$retr;
- $$retr = $ftp->retr($file) or ftp::rewindGetFile();
- $$retr ||= $ftp->retr($file);
-}
-
-sub getPackages {
- my ($prefix, $packages, $mirror) = @_;
-
- $crypto::host = $mirror;
-
- #- check first if there is something to get...
- my $fhdlist = getFile("base/hdlist.cz", $mirror);
- unless ($fhdlist) {
- log::l("no updates available, bailing out");
- return;
- }
-
- #- extract hdlist of crypto, then depslist.
- require pkgs;
- my $update_medium = pkgs::psUsingHdlist($prefix, 'ftp', $packages, "hdlist-updates.cz", "1u", "RPMS",
- "Updates for Mandrake Linux " . version(), 1, $fhdlist) and
- log::l("read updates hdlist");
- #- keep in mind where is the URL prefix used according to mirror (for install_any::install_urpmi).
- $update_medium->{prefix} = "ftp://$mirror" . dir($mirror);
- #- (re-)enable the medium to allow install of package,
- #- make it an update medium (for install_any::install_urpmi).
- $update_medium->{selected} = 1;
- $update_medium->{update} = 1;
-
- return $update_medium;
-}
-
-sub get {
- my ($mirror, $dir, @files) = @_;
- foreach (@files) {
- log::l("crypto: downloading $_");
- ftp($mirror)->get($_, "$dir/$_")
- }
- int @files;
-}
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
deleted file mode 100644
index 780cfde0f..000000000
--- a/perl-install/detect_devices.pm
+++ /dev/null
@@ -1,633 +0,0 @@
-package detect_devices; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($pcitable_addons $usbtable_addons);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use log;
-use common;
-use devices;
-use run_program;
-use c;
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my @netdevices = map { my $l = $_; map { "$l$_" } (0..3) } qw(eth tr fddi plip);
-my %serialprobe = ();
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub dev_is_devfs { -e "/dev/.devfsd" }
-
-
-sub get {
- #- Detect the default BIOS boot harddrive is kind of tricky. We may have IDE,
- #- SCSI and RAID devices on the same machine. From what I see so far, the default
- #- BIOS boot harddrive will be
- #- 1. The first IDE device if IDE exists. Or
- #- 2. The first SCSI device if SCSI exists. Or
- #- 3. The first RAID device if RAID exists.
-
- getIDE(), getSCSI(), getDAC960(), getCompaqSmartArray(), getATARAID();
-}
-sub hds { grep { $_->{media_type} eq 'hd' && ($::isStandalone || !isRemovableDrive($_)) } get() }
-sub tapes { grep { $_->{media_type} eq 'tape' && ($::isStandalone || !isRemovableDrive($_)) } get() }
-sub cdroms { grep { $_->{media_type} eq 'cdrom' } get() }
-sub burners { grep { isBurner($_) } cdroms() }
-sub dvdroms { grep { isDvdDrive($_) } cdroms() }
-sub raw_zips { grep { member($_->{media_type}, 'fd', 'hd') && isZipDrive($_) } get() }
-#-sub jazzs { grep { member($_->{media_type}, 'fd', 'hd') && isJazzDrive($_) } get() }
-sub ls120s { grep { member($_->{media_type}, 'fd', 'hd') && isLS120Drive($_) } get() }
-sub zips { map { $_->{device} .= 4; $_ } raw_zips() }
-
-sub cdroms__faking_ide_scsi {
- my @l = cdroms();
- return @l if $::isStandalone;
- if (my @l_ide = grep { $_->{bus} eq 'ide' && isBurner($_) } @l) {
- require modules;
- modules::add_alias('scsi_hostadapter', 'ide-scsi');
- my $nb = 1 + max(-1, map { $_->{device} =~ /scd(\d+)/ } @l);
- foreach my $e (@l_ide) {
- log::l("IDEBurner: $e->{device}");
- $e->{device} = "scd" . $nb++;
- }
- }
- @l;
-}
-sub zips__faking_ide_scsi {
- my @l = raw_zips();
- if (my @l_ide = grep { $_->{bus} eq 'ide' && $::isInstall } @l) {
- require modules;
- modules::add_alias('scsi_hostadapter', 'ide-scsi');
- my $nb = 1 + max(-1, map { if_($_->{device} =~ /sd(\w+)/, ord($1) - ord('a')) } getSCSI());
- foreach my $e (@l_ide) {
- my $faked = "sd" . chr(ord('a') + $nb++);
- log::l("IDE Zip: $e->{device} => $faked");
- $e->{device} = $faked;
- }
- }
- map { $_->{device} .= 4; $_ } @l;
-}
-
-sub floppies() {
- require modules;
- eval { modules::load("floppy") };
- my @fds = map {
- my $info = (!dev_is_devfs() || -e "/dev/$_") && c::floppy_info(devices::make($_));
- if_($info && $info ne '(null)', { device => $_, media_type => 'fd', info => $info })
- } qw(fd0 fd1);
- my @ide = ls120s() and eval { modules::load("ide-floppy") };
-
- eval { modules::load("usb-storage") } if usbStorage();
- my @scsi = grep { $_->{media_type} eq 'fd' && !isZipDrive($_) && !isJazzDrive($_) } getSCSI();
- @ide, @scsi, @fds;
-}
-sub floppies_dev() { map { $_->{device} } floppies() }
-sub floppy { first(floppies_dev()) }
-#- example ls120, model = "LS-120 SLIM 02 UHD Floppy"
-
-sub get_sys_cdrom_info {
- my (@drives) = @_;
-
- my @drives_order;
- foreach (cat_("/proc/sys/dev/cdrom/info")) {
- my ($t, $l) = split ':';
- my @l = split ' ', $l;
- if ($t eq 'drive name') {
- @drives_order = map {
- s/^sr/scd/;
- my $dev = $_;
- first(grep { $_->{device} eq $dev } @drives);
- } @l;
- } else {
- my $capacity;
- if ($t eq 'Can write CD-R') {
- $capacity = 'burner';
- } elsif ($t eq 'Can read DVD') {
- $capacity = 'DVD';
- }
- if ($capacity) {
- each_index {
- ($drives_order[$::i] || {})->{capacity} .= "$capacity " if $_;
- } @l;
- }
- }
- }
-}
-
-sub isBurner {
- my ($e) = @_;
- $e->{capacity} =~ /burner/ and return 1;
-
- #- do not work for SCSI
- my $f = tryOpen($e->{device}); #- SCSI burner are not detected this way.
- $f && c::isBurner(fileno($f));
-}
-sub isDvdDrive {
- my ($e) = @_;
- $e->{capacity} =~ /DVD/ || $e->{info} =~ /DVD/ and return 1;
-
- #- do not work for SCSI
- my $f = tryOpen($e->{device});
- $f && c::isDvdDrive(fileno($f));
-}
-sub isZipDrive { $_[0]->{info} =~ /ZIP\s+\d+/ } #- accept ZIP 100, untested for bigger ZIP drive.
-sub isJazzDrive { $_[0]->{info} =~ /\bJAZZ?\b/i } #- accept "iomega jaz 1GB"
-sub isLS120Drive { $_[0]->{info} =~ /LS-?120|144MB/ }
-sub isRemovableDrive { &isZipDrive || &isLS120Drive || $_[0]->{media_type} eq 'fd' } #-or &isJazzDrive }
-
-sub isFloppyOrHD {
- my ($dev) = @_;
- require partition_table_raw;
- my $geom = partition_table_raw::get_geometry(devices::make($dev));
- $geom->{totalsectors} < 10 << 11 ? 'fd' : 'hd';
-}
-
-sub getSCSI() {
- my $err = sub { log::l("ERROR: unexpected line in /proc/scsi/scsi: $_[0]"); };
-
- my ($first, @l) = common::join_lines(cat_("/proc/scsi/scsi"));
- $first =~ /^Attached devices:/ or $err->($first);
-
- @l = map_index {
- my ($id) = /^Host:.*?Id: (\d+)/ or $err->($_);
- my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/m or $err->($_);
- my ($type) = /^\s*Type:\s*(.*)/m or $err->($_);
- { info => "$vendor $model", id => $id, channel => 0, device => "sg$::i", raw_type => $type, bus => 'SCSI' };
- } @l;
-
- each_index {
- my $dev = "sd" . chr($::i + ord('a'));
- put_in_hash $_, { device => $dev, media_type => isZipDrive($_) ? 'hd' : isFloppyOrHD($dev) };
- } grep { $_->{raw_type} =~ /Direct-Access/ } @l;
-
- each_index {
- put_in_hash $_, { device => "st$::i", media_type => 'tape' };
- } grep { $_->{raw_type} =~ /Sequential-Access/ } @l;
-
- each_index {
- put_in_hash $_, { device => "scd$::i", media_type => 'cdrom' };
- } grep { $_->{raw_type} =~ /CD-ROM|WORM/ } @l;
-
- each_index {
- put_in_hash $_, { media_type => 'scanner' };
- } grep { $_->{raw_type} =~ /Scanner/ } @l;
-
- get_sys_cdrom_info(@l);
- @l;
-}
-
-my %eide_hds = (
- "ASUS" => "Asus",
- "CD-ROM CDU" => "Sony",
- "CD-ROM Drive/F5D" => "ASUSTeK",
- "Compaq" => "Compaq",
- "CONNER" => "Conner Peripherals",
- "IBM" => "IBM",
- "FUJITSU" => "Fujitsu",
- "HITACHI" => "Hitachi",
- "Lite-On" => "Lite-On Technology Corp.",
- "LTN" => "Lite-On Technology Corp.",
- "IOMEGA" => "Iomega",
- "MAXTOR" => "Maxtor",
- "Maxtor" => "Maxtor",
- "Micropolis" => "Micropolis",
- "PLEXTOR" => "Plextor",
- "QUANTUM" => "Quantum",
- "SAMSUNG" => "Samsung",
- "Seagate " => "Seagate Technology",
- "ST3" => "Seagate Technology",
- "TEAC" => "Teac",
- "TOSHIBA" => "Toshiba",
- "TEAC" => "Teac",
- "TOSHIBA" => "Toshiba",
- "WDC" => "Western Digital Corp.",
-);
-
-
-sub getIDE() {
- my @idi;
-
- #- what about a system with absolutely no IDE on it, like some sparc machine.
- -e "/proc/ide" or return ();
-
- #- Great. 2.2 kernel, things are much easier and less error prone.
- foreach my $d (sort @{[glob_('/proc/ide/hd*')]}) {
- cat_("$d/driver") =~ /ide-scsi/ and next; #- already appears in /proc/scsi/scsi
- my $t = chomp_(cat_("$d/media"));
- my $type = $ {{disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd'}}{$t} or next;
- my $info = chomp_(cat_("$d/model")) || "(none)";
-
- my $num = ord (($d =~ /(.)$/)[0]) - ord 'a';
- my ($vendor, $model) = map {
- if_($info =~ /^$_\b\s*(.*)/, $eide_hds{$_}, $1);
- } keys %eide_hds;
-
- push @idi, { media_type => $type, device => basename($d), info => $info, channel => $num/2, id => $num%2, bus => 'ide', Vendor => $vendor, Model => $model };
- }
- get_sys_cdrom_info(@idi);
- @idi;
-}
-
-sub getCompaqSmartArray() {
- my (@idi, $f);
-
- foreach ('array/ida', 'cpqarray/ida', 'cciss/cciss') {
- my $prefix = "/proc/driver/$_"; #- kernel 2.4 places it here
- $prefix = "/proc/$_" if !-e "${prefix}0"; #- kernel 2.2
-
- my ($name) = m|/(.*)|;
- for (my $i = 0; -r ($f = "${prefix}$i"); $i++) {
- foreach (cat_($f)) {
- if (m|^\s*($name/.*?):|) {
- push @idi, { device => $1, info => "Compaq RAID logical disk", media_type => 'hd', bus => 'ida' };
- }
- }
- }
- }
- @idi;
-}
-
-sub getDAC960() {
- my %idi;
-
- #- We are looking for lines of this format:DAC960#0:
- #- /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012
- foreach (syslog()) {
- my ($device, $info) = m|/dev/(rd/.*?): (.*?),| or next;
- $idi{$device} = { info => $info, media_type => 'hd', device => $device, bus => 'dac960' };
- }
- values %idi;
-}
-
-sub getATARAID {
- my %l;
- foreach (syslog()) {
- my ($device) = m|^\s*(ataraid/d\d+):| or next;
- $l{$device} = { info => 'ATARAID block device', media_type => 'hd', device => $device, bus => 'ataraid' };
- log::l("ATARAID: $device");
- }
- values %l;
-}
-
-sub getNet() {
- grep { !(($::isStandalone || $::live) && /plip/) && c::hasNetDevice($_) } @netdevices;
-}
-
-#sub getISDN() {
-# mapgrep(sub {member (($_[0] =~ /\s*(\w*):/), @netdevices), $1 }, split(/\n/, cat_("/proc/net/dev")));
-#}
-
-$pcitable_addons = <<'EOF';
-# add here lines conforming the pcitable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
-EOF
-
-$usbtable_addons = <<'EOF';
-# add here lines conforming the usbtable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
-EOF
-
-sub add_addons {
- my ($addons, @l) = @_;
-
- foreach (split "\n", $addons) {
- /^\s/ and die "bad detect_devices::probeall_addons line \"$_\"";
- s/^#.*//;
- s/"(.*?)"/$1/g;
- next if /^$/;
- my ($vendor, $id, $driver, $description) = split("\t", $_, 4) or die "bad detect_devices::probeall_addons line \"$_\"";
- foreach (@l) {
- $_->{vendor} == hex $vendor && $_->{id} == hex $id or next;
- put_in_hash($_, { driver => $driver, description => $description });
- }
- }
- @l;
-}
-
-sub pci_probe {
- my ($probe_type) = @_;
- log::l("full pci_probe") if $probe_type;
- add_addons($pcitable_addons, map {
- my %l;
- @l{qw(vendor id subvendor subid pci_bus pci_device pci_function media_type driver description)} = split "\t";
- $l{$_} = hex $l{$_} foreach qw(vendor id subvendor subid);
- $l{bus} = 'PCI';
- \%l
- } c::pci_probe($probe_type || 0));
-}
-
-sub usb_probe {
- -e "/proc/bus/usb/devices" or return ();
-
- add_addons($usbtable_addons, map {
- my %l;
- @l{qw(vendor id media_type driver description)} = split "\t";
- $l{$_} = hex $l{$_} foreach qw(vendor id);
- $l{bus} = 'USB';
- \%l
- } c::usb_probe());
-}
-
-sub pcmcia_probe {
- -e '/var/run/stab' || -e '/var/lib/pcmcia/stab' or return ();
-
- my (@devs, $desc);
- foreach (cat_('/var/run/stab'), cat_('/var/lib/pcmcia/stab')) {
- if (/^Socket\s+\d+:\s+(.*)/) {
- $desc = $1;
- } else {
- my (undef, $type, $module, undef, $device) = split;
- push @devs, { description => $desc, driver => $module, type => $type, device => $device };
- }
- }
- @devs;
-}
-
-# pci_probe with $probe_type is unsafe for pci! (bug in kernel&hardware)
-# pcmcia_probe provides field "device", used in network.pm
-# => probeall with $probe_type is unsafe
-sub probeall {
- my ($probe_type) = @_;
- require sbus_probing::main;
- pci_probe($probe_type), usb_probe(), pcmcia_probe(), sbus_probing::main::probe();
-}
-sub matching_desc {
- my ($regexp) = @_;
- grep { $_->{description} =~ /$regexp/i } probeall();
-}
-sub stringlist {
- map {
- sprintf("%-16s: %s%s%s",
- $_->{driver} ? $_->{driver} : 'unknown',
- $_->{description} eq '(null)' ? sprintf("Vendor=0x%04x Device=0x%04x", $_->{vendor}, $_->{id}) : $_->{description},
- $_->{media_type} ? sprintf(" [%s]", $_->{media_type}) : '',
- $_->{subid} && $_->{subid} != 0xffff ? sprintf(" SubVendor=0x%04x SubDevice=0x%04x", $_->{subvendor}, $_->{subid}) : '',
- );
- } probeall(@_);
-}
-
-sub tryOpen($) {
- local *F;
- sysopen F, devices::make($_[0]), c::O_NONBLOCK() and *F;
-}
-
-sub tryWrite($) {
- local *F;
- sysopen F, devices::make($_[0]), 1 | c::O_NONBLOCK() and *F;
-}
-
-sub syslog {
- -r "/tmp/syslog" and return map { /<\d+>(.*)/ } cat_("/tmp/syslog");
- `$ENV{LD_LOADER} /bin/dmesg`;
-}
-
-sub get_mac_model() {
- my $mac_model = cat_("/proc/device-tree/model") || die "Can't open /proc/device-tree/model";
- log::l("Mac model: $mac_model");
- $mac_model;
-}
-
-sub get_mac_generation() {
- my $generation = cat_("/proc/cpuinfo") || die "Can't open /proc/cpuinfo";
- my @genarray = split(/\n/, $generation);
- my $count = 0;
- while ($count <= @genarray) {
- if ($genarray[$count] =~ /pmac-generation/) {
- @genarray = split(/:/, $genarray[$count]);
- return $genarray[1];
- }
- $count++;
- }
- return "Unknown Generation";
-}
-
-sub hasSMP { c::detectSMP() }
-sub hasPCMCIA { $::o->{pcmcia} } #- because /proc/pcmcia seems not to be present on 2.4 at least (or use /var/run/stab)
-
-#- try to detect a laptop, we assume pcmcia service is an indication of a laptop or
-#- the following regexp to match graphics card apparently only used for such systems.
-sub isLaptop {
- hasPCMCIA() || (matching_desc('C&T.*655[45]\d') || matching_desc('C&T.*68554') ||
- matching_desc('Neomagic.*Magic(Media|Graph)') ||
- matching_desc('ViRGE.MX') || matching_desc('S3.*Savage.*[IM]X') ||
- matching_desc('ATI.*(Mobility|LT)'));
-}
-
-sub hasUltra66 {
- die "hasUltra66 deprecated";
- #- keep it BUT DO NOT USE IT as now included in kernel.
- cat_("/proc/cmdline") =~ /(ide2=(\S+)(\s+ide3=(\S+))?)/ and return $1;
-
- my @l = map { $_->{verbatim} } matching_desc('HPT|Ultra66') or return;
-
- my $ide = sprintf "ide2=0x%x,0x%x ide3=0x%x,0x%x",
- @l == 2 ?
- (map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..4] } @l) :
- (map_index { hex($_) + (odd($::i) ? 1 : -1) } map { (split ' ')[3..6] } @l);
-
- log::l("HPT|Ultra66: found $ide");
- $ide;
-}
-
-sub whatParport() {
- my @res = ();
- foreach (0..3) {
- my $elem = {};
- local *F;
- open F, "/proc/parport/$_/autoprobe" or open F, "/proc/sys/dev/parport/parport$_/autoprobe" or next;
- {
- local $_;
- while (<F>) {
- if (/(.*):(.*);/) {
- $elem->{$1} = $2;
- $elem->{$1} =~ s/Hewlett[-\s_]Packard/HP/;
- $elem->{$1} =~ s/HEWLETT[-\s_]PACKARD/HP/;
- }
- }
- }
- push @res, { port => "/dev/lp$_", val => $elem};
- }
- @res;
-}
-
-sub usbMice { grep { ($_->{media_type} =~ /\|Mouse/ || $_->{driver} =~ /Mouse:USB/) &&
- $_->{driver} !~ /Tablet:wacom/} usb_probe() };
-sub usbWacom { grep { $_->{driver} =~ /Tablet:wacom/ } usb_probe() }
-sub usbKeyboards { grep { $_->{media_type} =~ /\|Keyboard/ } usb_probe() }
-sub usbStorage { grep { $_->{media_type} =~ /Mass Storage\|/ } usb_probe() }
-
-sub whatUsbport() {
- # The printer manufacturer and model names obtained with the usb_probe()
- # function were very messy, once there was a lot of noise around the
- # manufacturers name ("Inc.", "SA", "International", ...) and second,
- # all Epson inkjets answered with the name "Epson Stylus Color 760" which
- # lead many newbies to install their Epson Stylus Photo XXX as an Epson
- # Stylus Color 760 ...
- #
- # This routine based on an ioctl request gives very clean and correct
- # manufacturer and model names, so that they are easily matched to the
- # printer entries in the Foomatic database
- my $i;
- my @res = ();
- foreach $i (0..15) {
- my $port = "/dev/usb/lp$i";
- my $realport = devices::make("$port");
- next if (!$realport);
- next if (! -r $realport);
- open PORT, "$realport" or do next;
- my $idstr = "";
- # Calculation of IOCTL function 0x84005001 (to get device ID
- # string):
- # len = 1024
- # IOCNR_GET_DEVICE_ID = 1
- # LPIOC_GET_DEVICE_ID(len) =
- # _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
- # _IOC(), _IOC_READ as defined in /usr/include/asm/ioctl.h
- # Use "eval" so that program does not stop when IOCTL fails
- eval{ my $output = "\0" x 1024;
- ioctl(PORT, 0x84005001, $output);
- $idstr = $output; } or do {
- close PORT;
- next;
- };
- close PORT;
- # Remove non-printable characters
- $idstr =~ tr/[\x00-\x1f]/\./;
- # Extract the printer data from the ID string
- my ($manufacturer, $model, $description) = ("", "", "");
- if (($idstr =~ /MFG:([^;]+);/) ||
- ($idstr =~ /MANUFACTURER:([^;]+);/)) {
- $manufacturer = $1;
- $manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
- $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/;
- }
- if (($idstr =~ /MDL:([^;]+);/) ||
- ($idstr =~ /MODEL:([^;]+);/)) {
- $model = $1;
- }
- if (($idstr =~ /DES:([^;]+);/) ||
- ($idstr =~ /DESCRIPTION:([^;]+);/)) {
- $description = $1;
- $description =~ s/Hewlett[-\s_]Packard/HP/;
- $description =~ s/HEWLETT[-\s_]PACKARD/HP/;
- }
- # Was there a manufacturer and a model in the string?
- if (($manufacturer eq "") || ($model eq "")) {
- next;
- }
- # No description field? Make one out of manufacturer and model.
- if ($description eq "") {
- $description = "$manufacturer $model";
- }
- # Store this auto-detection result in the data structure
- push @res, { port => $port, val =>
- { CLASS => 'PRINTER',
- MODEL => $model,
- MANUFACTURER => $manufacturer,
- DESCRIPTION => $description,
- }};
- }
- @res;
-}
-
-#-CLASS:PRINTER;
-#-MODEL:HP LaserJet 1100;
-#-MANUFACTURER:Hewlett-Packard;
-#-DESCRIPTION:HP LaserJet 1100 Printer;
-#-COMMAND SET:MLC,PCL,PJL;
-sub whatPrinter() {
- my @res = (whatParport(), whatUsbport());
- grep { $_->{val}{CLASS} eq "PRINTER"} @res;
-}
-
-sub whatPrinterPort() {
- grep { tryWrite($_)} qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9);
-}
-
-sub probeSerialDevices {
- #- make sure the device are created before probing.
- foreach (0..3) { devices::make("/dev/ttyS$_") }
-
- #- for device already probed, we can safely (assuming device are
- #- not moved during install :-)
- #- include /dev/mouse device if using an X server.
- -d "/var/lock" or mkdir "/var/lock", 0755;
- -l "/dev/mouse" and $serialprobe{"/dev/" . readlink "/dev/mouse"} = undef;
- foreach (keys %serialprobe) { m|^/dev/(.*)| and touch "/var/lock/LCK..$1" }
-
- print STDERR "Please wait while probing serial ports...\n";
- #- start probing all serial ports... really faster than before ...
- #- ... but still take some time :-)
- local *F; open F, "$ENV{LD_LOADER} serial_probe |";
- local $_;
- my %current = (); while (<F>) {
- $serialprobe{$current{DEVICE}} = { %current } and %current = () if /^\s*$/ && $current{DEVICE};
- $current{$1} = $2 if /^([^=]+)=(.*?)\s*$/;
- }
- close F;
-
- foreach (values %serialprobe) {
- $_->{DESCRIPTION} =~ /modem/i and $_->{CLASS} = 'MODEM'; #- hack to make sure a modem is detected.
- $_->{DESCRIPTION} =~ /olitec/i and $_->{CLASS} = 'MODEM'; #- hack to make sure such modem gets detected.
- log::l("probed $_->{DESCRIPTION} of class $_->{CLASS} on device $_->{DEVICE}");
- }
-}
-
-sub probeSerial($) { $serialprobe{$_[0]} }
-
-sub hasModem($) {
- $serialprobe{$_[0]} and $serialprobe{$_[0]}{CLASS} eq 'MODEM' and $serialprobe{$_[0]}{DESCRIPTION};
-}
-
-sub hasMousePS2 {
- my $t; sysread(tryOpen($_[0]) || return, $t, 256) != 1 || $t ne "\xFE";
-}
-
-sub raidAutoStartIoctl {
- local *F;
- sysopen F, devices::make("md0"), 2 or return;
- ioctl F, 2324, 0;
-}
-
-sub raidAutoStartRaidtab {
- my (@parts) = @_;
- require raid;
- #- faking a raidtab, it seems to be working :-)))
- #- (choosing any inactive md)
- raid::inactivate_all();
- foreach (@parts) {
- my ($nb) = grep { !raid::is_active("md$_") } 0..7;
- output("/etc/raidtab", "raiddev /dev/md$nb\n device " . devices::make($_->{device}) . "\n");
- run_program::run('raidstart', devices::make("md$nb"));
- }
-}
-
-sub raidAutoStart {
- my (@parts) = @_;
-
- log::l("raidAutoStart");
- eval { modules::load('md') };
- my %personalities = ( '1' => 'linear', '2' => 'raid0', '3' => 'raid1', '4' => 'raid5' );
- raidAutoStartIoctl() or raidAutoStartRaidtab(@parts);
- if (my @needed_perso = map {
- if_(/^kmod: failed.*md-personality-(.)/ ||
- /^md: personality (.) is not loaded/, $personalities{$1}) } syslog()) {
- eval { modules::load(@needed_perso) };
- raidAutoStartIoctl() or raidAutoStartRaidtab(@parts);
- }
-}
-
-sub is_a_recent_computer {
- my ($frequence) = map { /cpu MHz\s*:\s*(.*)/ } cat_("/proc/cpuinfo");
- $frequence > 600;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
diff --git a/perl-install/devices.pm b/perl-install/devices.pm
deleted file mode 100644
index 260793e30..000000000
--- a/perl-install/devices.pm
+++ /dev/null
@@ -1,185 +0,0 @@
-package devices; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use run_program;
-use log;
-use c;
-
-sub size($) {
- local *F;
- sysopen F, $_[0], 0 or log::l("open $_[0]: $!"), return 0;
-
- my $valid_offset = sub { sysseek(F, $_[0], 0) && sysread(F, my $a, 1) };
-
- #- first try getting the size nicely
- if (my $size = c::total_sectors(fileno F)) {
- return $size * $common::SECTORSIZE;
- }
-
- #- sad it didn't work, well searching the size using the dichotomy algorithm!
- my $low = 0;
- my ($high, $mid);
-
- #- first find n where 2^n < size <= 2^n+1
- for ($high = 1; $high > 0 && &$valid_offset($high); $high *= 2) { $low = $high; }
-
- while ($low < $high - 1) {
- $mid = int ($low + $high) / 2;
- &$valid_offset($mid) ? $low : $high = $mid;
- }
- $low + 1;
-}
-
-sub del_loop {
- my ($dev) = @_;
- run_program::run("losetup", "-d", $dev);
-}
-sub find_free_loop {
- foreach (0..7) {
- my $dev = make("loop$_");
- local *F;
- sysopen F, $dev, 2 or next;
- !ioctl(F, c::LOOP_GET_STATUS(), my $tmp) && $! == 6 or next; #- 6 == ENXIO
- close F;
- return $dev;
- }
- die "no free loop found";
-}
-sub set_loop {
- my ($file, $encrypt_key, $encryption) = @_;
- my $dev = find_free_loop();
-
- if ($encrypt_key && $encryption) {
- my $cmd = "losetup -p 0 -e $encryption $dev $file";
- log::l("calling $cmd");
- local *F;
- open F, "|$cmd";
- print F $encrypt_key;
- close F or die "losetup failed";
- } else {
- run_program::run("losetup", $dev, $file) or return;
- }
- $dev;
-}
-
-sub entry {
- my ($type, $major, $minor);
- local ($_) = @_;
-
- if (/^0x([\da-f]{3,4})$/i) {
- $type = c::S_IFBLK();
- ($major, $minor) = unmakedev(hex $1);
- } elsif (/^sd(.)(\d{0,2})/) {
- $type = c::S_IFBLK();
- $major = 8;
- $minor = 16 * (ord($1) - ord('a')) + ($2 || 0);
- } elsif (/^hd(.)(\d{0,2})/) {
- $type = c::S_IFBLK();
- ($major, $minor) =
- @{ $ {{'a' => [3, 0], 'b' => [3, 64],
- 'c' => [22,0], 'd' => [22,64],
- 'e' => [33,0], 'f' => [33,64],
- 'g' => [34,0], 'h' => [34,64],
- 'i' => [56,0], 'j' => [56,64],
- 'k' => [57,0], 'l' => [57,64],
- 'm' => [88,0], 'n' => [88,64],
- 'o' => [89,0], 'p' => [89,64],
- 'q' => [90,0], 'r' => [90,64],
- 's' => [91,0], 't' => [91,64],
- }}{$1} or die "unknown device $_" };
- $minor += $2 || 0;
- } elsif (/^ram(.*)/) {
- $type = c::S_IFBLK();
- $major = 1;
- $minor = $1 eq '' ? 1 : $1;
- } elsif (m|^rd/c(\d+)d(\d+)(p(\d+))?|) {
- # dac 960 "rd/cXdXXpX"
- $type = c::S_IFBLK();
- $major = 48 + $1;
- $minor = 8 * $2 + $4;
- } elsif (m,(ida|cciss)/c(\d+)d(\d+)(?:p(\d+))?,) {
- # Compaq Smart Array "ida/c0d0{p1}"
- $type = c::S_IFBLK();
- $major = ($1 eq 'ida' ? 72 : 104) + $2;
- $minor = 16 * $3 + ($4 || 0);
- } elsif (m,(ataraid)/d(\d+)(?:p(\d+))?,) {
- # ATA raid "ataraid/d0{p1}"
- $type = c::S_IFBLK();
- $major = 114;
- $minor = 16 * $1 + ($2 || 0);
- } elsif (/(.*?)(\d+)$/) {
- ($type, $major, $minor) =
- @{ ${{"fd" => [ c::S_IFBLK(), 2, 0 ],
- "hidbp-mse-" => [ c::S_IFCHR(), 10, 32 ],
- "lp" => [ c::S_IFCHR(), 6, 0 ],
- "usb/lp" => [ c::S_IFCHR(), 180, 0 ],
- "input/event" => [ c::S_IFCHR(), 13, 64 ],
- "loop" => [ c::S_IFBLK(), 7, 0 ],
- "md" => [ c::S_IFBLK(), 9, 0 ],
- "nst" => [ c::S_IFCHR(), 9, 128],
- "scd" => [ c::S_IFBLK(), 11, 0 ],
- "ttyS" => [ c::S_IFCHR(), 4, 64 ],
- }}{$1}};
- $minor += $2;
- }
- unless ($type) {
- ($type, $major, $minor) =
- @{ ${{"aztcd" => [ c::S_IFBLK(), 29, 0 ],
- "bpcd" => [ c::S_IFBLK(), 41, 0 ],
- "cdu31a" => [ c::S_IFBLK(), 15, 0 ],
- "cdu535" => [ c::S_IFBLK(), 24, 0 ],
- "cm206cd" => [ c::S_IFBLK(), 32, 0 ],
- "gscd" => [ c::S_IFBLK(), 16, 0 ],
- "mcd" => [ c::S_IFBLK(), 23, 0 ],
- "mcdx" => [ c::S_IFBLK(), 20, 0 ],
- "mem" => [ c::S_IFCHR(), 1, 1 ],
- "optcd" => [ c::S_IFBLK(), 17, 0 ],
- "kbd" => [ c::S_IFCHR(), 11, 0 ],
- "psaux" => [ c::S_IFCHR(), 10, 1 ],
- "atibm" => [ c::S_IFCHR(), 10, 3 ],
- "random" => [ c::S_IFCHR(), 1, 8 ],
- "sbpcd" => [ c::S_IFBLK(), 25, 0 ],
- "sjcd" => [ c::S_IFBLK(), 18, 0 ],
- "tty" => [ c::S_IFCHR(), 5, 0 ],
- "usbmouse"=> [ c::S_IFCHR(), 13, 63], #- aka /dev/input/mice
- "adbmouse"=> [ c::S_IFCHR(), 10, 10], #- PPC
- "zero" => [ c::S_IFCHR(), 1, 5 ],
- }}{$_} or die "unknown device $_ (caller is " . join(":", caller()) . ")" };
- }
- ($type, $major, $minor);
-}
-
-
-sub make($) {
- local $_ = my $file = $_[0];
-
- if (m,^(.*/(?:dev|tmp))/(.*),) {
- $_ = $2;
- } else {
- $file =~ m|^/| && -e $file or $file = "/tmp/$_";
- $file =~ m|^/| && -e $file or $file = "/dev/$_";
- }
- -e $file and return $file; #- assume nobody takes fun at creating files named as device
-
- my ($type, $major, $minor) = eval { entry($_) };
- $@ and die "unknown device $_ (caller is " . join(":", caller()) . ")";
-
- if ($file =~ m|/dev/| && -e '/dev/.devfsd') {
- #- argh, creating devices is no good with devfs...
- #- return the file even if the device file doesn't exist
- #- the caller will fail or not, better compatibility than raising an exception here
- return $file;
- }
-
- #- make a directory for this inode if needed.
- mkdir dirname($file), 0755;
-
- syscall_('mknod', $file, $type | 0600, makedev($major, $minor)) or die "mknod failed (dev $_): $!";
-
- $file;
-}
-
-1;
diff --git a/perl-install/diskdrake/diskdrake.html b/perl-install/diskdrake/diskdrake.html
deleted file mode 100644
index 7e85c3cde..000000000
--- a/perl-install/diskdrake/diskdrake.html
+++ /dev/null
@@ -1,139 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
-<html>
- <head>
- <title>DiskDrake</title>
- </head>
- <body bgcolor="#ffffff">
-
-<center>
-<table width=80% border=0 cellpadding=10 cellspacing=10>
-<tr>
-<td bgcolor=#ffffff>
-
- <p>
- <img src="images/diskdrake1-def.jpg" alt="diskdrake logo" width=400 height=100>
- <p>
-
- <H2>I- What's it?</H2>
-
- The purpose of the DiskDrake project is to make easier the hard disk
- partitionning. It is graphical, simple and powerful. The license is
- the GPL (General Public License).
- <BR>
- Different skill levels will be available (newbie, advanced user, expert).
- <BR>
- It's written entirely in Perl and Perl/Gtk. It uses resize_fat which is
- a perl rewrite of the work of Andrew Clausen (libresize).
- <P>
- DiskDrake is a project from MandrakeSoft, the company behind the popular
- <a href="http://www.linux-mandrake.com">Linux-Mandrake</a>
- operating-system.
- <P>
- A <A href="http://www.eatel.net/~john/diskdrake/faq.html">FAQ</A> is in construction.
-
- <H2>II - What's available now</H2>
-
- DiskDrake should be usable now...
-
- it can:
- <UL>
- <LI> create partitions
- <LI> delete partitions
- <LI> change type of partition
- <LI> format partitions
- <LI> assign a mount point (<IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(21/07/99)</SMALL> propose a list
- of classic mount points and verify the mount point is valid)
- <LI> mount partitions
- <LI> resize fat partitions
- <LI> resize partitions (when not caring loosing its data)
- <LI> clear partition table
- <LI> auto allocation (usefull for install)
- <LI> write fstab
- </UL>
-
-with nice contextual menu (shortcuts available, but dangerous as all actions are
-available, whereas with the contextual menu these actions are hidden. This will
-change)
-
- <P><IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(25/07/99)</SMALL>
- A new Expert button appear now. It toggles between
- expert and normal mode. Some changes in information displayed:
- <UL>
- <LI> when you click (or focus) the drive tab (eg: hda), you get
- information about your drive: size, geometry
- (cylinders/sectors/heads number), type (eg: IBM DDRS-39130D), and bus/id.
- In normal mode you have only the size.
- <LI> the windows drive letter (eg: C: D: ...)
- <LI> the `start sector' information from normal mode, it still appears in
- expert mode
- <LI> the start&end cylinder of each partition is now displayed in expert
- mode
- <LI> the type is displayed numerically in expert mode
- </UL>
-
- <P><IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(25/07/99)</SMALL>
- The mount point in the `Create' window and `Change type' window is now a
- combo box. It lets you choose between classical mount points (/ /usr /var
- ...) but with already allocated mount points removed.
-
- <H2>III - Actual developpment</H2>
-
- We need people!!!
-
- <UL>
- <LI><B>Tests</B> and remove bugs (no known yet :)
- <LI>integrate ext2resize (which has been release in version 1.0.0 <IMG
- SRC="/images/updated.gif" ALT="updated"><SMALL>(26/07/99)</SMALL>)
- <LI>add possibility to move partition without loosing data (by copying all
- data) <IMG SRC="/images/updated.gif" ALT="updated">
- <LI>Improve the look
- <LI>Add a text-only version
- <LI>Help text, tutorial...
- <LI>Internationalization
- <LI>Add some features...
- <LI>Packaging (rpm, deb, slp...)
- </UL>
-
- <H2>IV- ScreenShot</H2>
-
- Warning: features was the main focus, so don't be too hard :)
-
- <P>
- <CENTER><IMG SRC="1.gif"></IMG></CENTER>
- <CENTER>DiskDrake main interface</CENTER>
-
- <BR>
- <CENTER><IMG SRC="3.gif"></IMG></CENTER>
- <CENTER>create dialog box</CENTER>
-
- <H2>V - Contacts</H2>
-
- A Mailing List has been created to allow developpers to discuss about DiskDrake.<BR>
-
- <P>
- Send a mail to: <A HREF="mailto:sympa@linux-mandrake.com">sympa@linux-mandrake.com</A>
-
- <BR>Put in the subject: subscribe diskdrake
- <BR>When you're subscribed, send your messages to: <A HREF="mailto:diskdrake@linux-mandrake.com">diskdrake@linux-mandrake.com</A>
-
- <P>Otherwise you can contact directly the <A HREF="mailto:pixel@linux-mandrake.com">project leader</A>.
-
- <H2>VI - Download</H2>
-
- Warning: You must have <a href="http://www.perl.com/CPAN/modules/by-module/Gtk/Gtk-Perl-0.5121.tar.gz">Gtk-Perl</a>.
- You can get the rpm from the <a href="http://linux-mandrake.com/cooker/">Cooker</a> distribution.
-
- <P>You also need perl version 5.00503 or better
-
- <P> Here you can find the plain tgz or a rpm:
- <a href="ftp://ftp.phys.ttu.edu/pub/mandrake-devel/contrib/others/diskdrake/">diskdrake</a> (Other mirrors in <a href="http://linux-mandrake.com/cooker/">Cooker</a>)
-
-</td>
-</tr>
-</table>
-<p>
-<a href="/en/fpowerpack.php3"><img src="/images/mandrake6.0-loop.gif" width=468 height=60 alt="Mandrake 6.0 PowerPack"></a>
-</center>
- </body>
- <address><a href="mailto:pixel@linux-mandrake.com"></a></address>
-</html>
diff --git a/perl-install/diskdrake/hd_gtk.pm b/perl-install/diskdrake/hd_gtk.pm
deleted file mode 100644
index 2de971f89..000000000
--- a/perl-install/diskdrake/hd_gtk.pm
+++ /dev/null
@@ -1,382 +0,0 @@
-package diskdrake::hd_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::main;
-use my_gtk qw(:helpers :wrappers :ask);
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use diskdrake::interactive;
-use run_program;
-use loopback;
-use devices;
-use raid;
-use any;
-use log;
-use fsedit;
-use fs;
-
-my ($width, $height, $minwidth) = (400, 50, 5);
-my ($all_hds, $in, $current_kind, $current_entry, $update_all);
-my ($w, @notebook, $done_button);
-
-=begin
-
-struct {
- string name # which is displayed in tab of the notebook
- bool no_auto # wether the kind can disappear after creation
- string type # one of { 'hd', 'raid', 'lvm', 'loopback', 'removable', 'nfs', 'smb' }
- hd | hd_lvm | part_raid[] | part_loopback[] | raw_hd[] val
-
- #
- widget main_box
- widget display_box
- widget action_box
- widget info_box
-} current_kind
-
-part current_entry
-
-notebook current_kind[]
-
-=cut
-
-sub main {
- ($in, $all_hds, my $nowizard) = @_;
-
- @notebook = ();
-
- local $in->{grab} = 1;
-
- $w = my_gtk->new('DiskDrake');
- my $rc = "/usr/share/libDrakX/diskdrake.rc";
- -r $rc or $rc = dirname(__FILE__) . "/../diskdrake.rc";
- -r $rc or $rc = dirname(__FILE__) . "/../share/diskdrake.rc";
- Gtk::Rc->parse($rc);
-
- # TODO
-# is_empty_array_ref($all_hds->{raids}) or raid::stopAll;
-# updateLoopback();
-
- gtkadd($w->{window},
- gtkpack_(new Gtk::VBox(0,7),
- 0, (my $filesystems_button_box = filesystems_button_box()),
- 1, (my $notebook_widget = new Gtk::Notebook),
- 0, (my $per_kind_action_box = new Gtk::HBox(0,0)),
- 0, (my $general_action_box = new Gtk::HBox(0,0)),
- ),
- );
- my $lock;
- $update_all = sub {
- $lock and return;
- $lock = 1;
- partition_table::assign_device_numbers($_) foreach fsedit::all_hds($all_hds);
- create_automatic_notebooks($notebook_widget);
- general_action_box($general_action_box, $nowizard);
- per_kind_action_box($per_kind_action_box, $current_kind);
- current_kind_changed($in, $current_kind);
- current_entry_changed($current_kind, $current_entry);
- $lock = 0;
- };
- create_automatic_notebooks($notebook_widget);
-
- $notebook_widget->signal_connect('switch_page' => sub {
- $current_kind = $notebook[$_[2]];
- $current_entry = '';
- $update_all->();
- });
- $w->sync;
- $done_button->grab_focus;
- $my_gtk::pop_it = 1;
- $in->ask_okcancel(_("Read carefully!"), _("Please make a backup of your data first"), 1) or return
- if $::isStandalone;
- $in->ask_warn('',
-_("If you plan to use aboot, be carefull to leave a free space (2048 sectors is enough)
-at the beginning of the disk")) if (arch() eq 'alpha') and !$::isEmbedded;
-
- $w->main;
-}
-
-sub try {
- my ($name, @args) = @_;
- my $f = $diskdrake::interactive::{$name} or die "unknown function $name";
- try_($name, \&{$f}, @args);
-}
-sub try_ {
- my ($name, $f, @args) = @_;
-
- fsedit::undo_prepare($all_hds) if $name ne 'Undo';
-
- my $v = eval { $f->($in, @args, $all_hds) };
- if (my $err = $@) {
- $err =~ /setstep/ and die '';
- $in->ask_warn(_("Error"), formatError($err));
- }
-
- $current_entry = '' if !diskdrake::interactive::is_part_existing($current_entry, $all_hds);
- $update_all->();
-
- if ($v && member($name, 'Done', 'Wizard')) {
- $::isEmbedded ? kill( 'USR1', $::CCPID) : Gtk->main_quit;
- }
-}
-
-################################################################################
-# generic: helpers
-################################################################################
-sub add_kind2notebook {
- my ($notebook_widget, $kind) = @_;
- die if $kind->{main_box};
-
- $kind->{display_box} = gtkset_usize(new Gtk::HBox(0,0), $width, $height);
- $kind->{action_box} = gtkset_usize(new Gtk::VBox(0,0), 150, 180);
- $kind->{info_box} = new Gtk::VBox(0,0);
- $kind->{main_box} =
- gtkpack_(new Gtk::VBox(0,7),
- 0, $kind->{display_box},
- 1, gtkpack_(new Gtk::HBox(0,7),
- 0, $kind->{action_box},
- 1, $kind->{info_box}));
- my_gtk::add2notebook($notebook_widget, $kind->{name}, $kind->{main_box});
- push @notebook, $kind;
- $kind;
-}
-
-sub general_action_box {
- my ($box, $nowizard) = @_;
- $_->widget->destroy foreach $box->children;
- my @actions = (if_($::isInstall && !$nowizard, __("Wizard")),
- diskdrake::interactive::general_possible_actions($in, $all_hds),
- __("Done"));
- foreach my $s (@actions) {
- my $button = new Gtk::Button(translate($s));
- $done_button = $button if $s eq 'Done';
- gtkadd($box, gtksignal_connect($button, clicked => sub { try($s) }));
- }
-}
-sub per_kind_action_box {
- my ($box, $kind) = @_;
- $_->widget->destroy foreach $box->children;
-
- $kind->{type} =~ /hd|lvm/ or return;
-
- foreach my $s (diskdrake::interactive::hd_possible_actions($in, kind2hd($kind), $all_hds)) {
- gtkadd($box,
- gtksignal_connect(new Gtk::Button(translate($s)),
- clicked => sub { try($s, kind2hd($kind)) }));
- }
-}
-sub per_entry_action_box {
- my ($box, $kind, $entry) = @_;
- $_->widget->destroy foreach $box->children;
-
- if ($entry) {
- my @buttons = map {
- my $s = $_;
- my $w = new Gtk::Button(translate($s));
- $w->signal_connect(clicked => sub { try($s, kind2hd($kind), $entry) });
- $w;
- } diskdrake::interactive::part_possible_actions($in, kind2hd($kind), $entry, $all_hds);
-
- gtkadd($box, gtkadd(new Gtk::Frame(_("Choose action")),
- createScrolledWindow(gtkpack__(new Gtk::VBox(0,0), @buttons)))) if @buttons;
- } else {
- my $txt = !$::isStandalone && fsedit::is_one_big_fat($all_hds->{hds}) ?
-_("You have one big FAT partition
-(generally used by MicroSoft Dos/Windows).
-I suggest you first resize that partition
-(click on it, then click on \"Resize\")") : _("Please click on a partition");
- gtkpack($box, gtktext_insert(new Gtk::Text, $txt));
- }
-}
-
-sub per_entry_info_box {
- my ($box, $kind, $entry) = @_;
- $_->widget->destroy foreach $box->children;
- my $info;
- if ($entry) {
- $info = diskdrake::interactive::format_part_info(kind2hd($kind), $entry);
- } elsif ($kind->{type} =~ /hd|lvm/) {
- $info = diskdrake::interactive::format_hd_info($kind->{val});
- }
- gtkpack($box, gtkadd(new Gtk::Frame(_("Details")), gtkset_justify(new Gtk::Label($info), 'left')));
-}
-
-sub current_kind_changed {
- my ($in, $kind) = @_;
-
- $_->widget->destroy foreach $kind->{display_box}->children;
-
- my $v = $kind->{val};
- my @parts =
- $kind->{type} eq 'raid' ? grep {$_} @$v :
- $kind->{type} eq 'loopback' ? @$v : fsedit::get_fstab_and_holes($v);
- my $totalsectors =
- $kind->{type} =~ /raid|loopback/ ? sum(map { $_->{size} } @parts) : $v->{totalsectors};
- create_buttons4partitions($kind, $totalsectors, @parts);
-}
-
-sub current_entry_changed {
- my ($kind, $entry) = @_;
- $current_entry = $entry;
- if ($kind) {
- per_entry_action_box($kind->{action_box}, $kind, $entry);
- per_entry_info_box($kind->{info_box}, $kind, $entry);
- }
-}
-
-sub create_automatic_notebooks {
- my ($notebook_widget) = @_;
- my @l = fsedit::all_hds($all_hds);
-
- $_->{marked} = 0 foreach @notebook;
- my $may_add = sub {
- my ($kind) = @_;
- my @l = grep { $kind->{val} == $_->{val} } @notebook;
- @l > 1 and log::l("weird: create_automatic_notebooks");
- $kind = $l[0] || add_kind2notebook($notebook_widget, $kind);
- $kind->{marked} = 1;
- };
- $may_add->(hd2kind($_)) foreach @{$all_hds->{hds}};
- $may_add->(lvm2kind($_)) foreach @{$all_hds->{lvms}};
- $may_add->(raid2kind()) if grep {$_} @{$all_hds->{raids}};
- $may_add->(loopback2kind()) if @{$all_hds->{loopbacks}};
-
- @notebook = grep_index {
- my $b = $_->{marked} or $notebook_widget->remove_page($::i);
- $b;
- } @notebook;
- @notebook or die '';
-}
-
-################################################################################
-# parts: helpers
-################################################################################
-sub create_buttons4partitions {
- my ($kind, $totalsectors, @parts) = @_;
-
- $width = max($width, 0.9 * second($w->{window}->window->get_size)) if $w->{window}->window;
-
- my $ratio = $totalsectors ? ($width - @parts * $minwidth) / $totalsectors : 1;
- while (1) {
- my $totalwidth = sum(map { $_->{size} * $ratio + $minwidth } @parts);
- $totalwidth <= $width and last;
- $ratio /= $totalwidth / $width * 1.1;
- }
-
- foreach my $entry (@parts) {
- my $w = new Gtk::Button($entry->{mntpoint} || '') or die '';
- $w->signal_connect(focus_in_event => sub { current_entry_changed($kind, $entry) });
- $w->signal_connect(button_press_event => sub { current_entry_changed($kind, $entry) });
- $w->signal_connect(key_press_event => sub {
- my ($w, $e) = @_;
- $e->{state} & 4 or return;
- my $c = chr $e->{keyval};
-
- foreach my $s (diskdrake::interactive::part_possible_actions($in, kind2hd($kind), $entry, $all_hds)) {
- ${{
- Create => 'c', Delete => 'd', Format => 'f',
- Loopback => 'l', Resize => 'r', Type => 't',
- Mount => 'M', Unmount => 'u', 'Mount point' => 'm',
- 'Add to LVM' => 'L', 'Remove from LVM' => 'L',
- 'Add to RAID' => 'R', 'Remove from RAID' => 'R',
- }}{$s} eq $c or next;
-
- try($s, kind2hd($kind), $entry);
- last;
- }
- });
- $w->set_name("PART_" . type2name($entry->{type}));
- $w->set_usize($entry->{size} * $ratio + $minwidth, 0);
- gtkpack__($kind->{display_box}, $w);
- $w->grab_focus if $current_entry && fsedit::is_same_part($current_entry, $entry);
- }
-}
-
-
-################################################################################
-# disks: helpers
-################################################################################
-sub current_hd {
- $current_kind->{type} eq 'hd' or die 'current_hd called but $current_kind is not an hd';
- $current_kind->{val};
-}
-sub current_part {
- current_hd();
- $current_entry;
-}
-
-sub kind2hd {
- my ($kind) = @_;
- $kind->{type} =~ /hd|lvm/ ? $kind->{val} : {}
-}
-
-sub hd2kind {
- my ($hd) = @_;
- { type => 'hd', name => $hd->{device}, val => $hd };
-}
-
-sub filesystems_button_box() {
- my @types = (__("Ext2"), __("Journalised FS"), __("Swap"), arch() =~ /sparc/ ? __("SunOS") : arch() eq "ppc" ? __("HFS") : __("FAT"),
- __("Other"), __("Empty"));
- my %name2type = (Ext2 => 0x83, 'Journalised FS' => 0x483, Swap => 0x82, Other => 1, FAT => 0xb, HFS => 0x402);
-
- gtkpack(new Gtk::HBox(0,0),
- _("Filesystem types:"),
- map { my $w = new Gtk::Button(translate($_));
- my $t = $name2type{$_};
- $w->signal_connect(clicked => sub { try_('', \&createOrChangeType, $t, current_hd(), current_part()) });
- $w->can_focus(0);
- $w->set_name($_);
- $w;
- } @types);
-}
-
-sub createOrChangeType {
- my ($in, $type, $hd, $part, $all_hds) = @_;
-
- $part ||= !fsedit::get_fstab($hd) &&
- { type => 0, start => 1, size => $hd->{totalsectors} - 1 };
- $part or return;
- if ($type == 1) {
- $in->ask_warn('', _("Use ``%s'' instead", $part->{type} ? _("Type") : _("Create")));
- } elsif (!$type) {
- $in->ask_warn('', _("Use ``%s'' instead", _("Delete"))) if $part->{type};
- } elsif ($part->{type}) {
- return unless $::expert;
- return if $type == $part->{type};
- isBusy($part) and $in->ask_warn('', _("Use ``Unmount'' first")), return;
- diskdrake::interactive::ask_alldatawillbelost($in, $part, __("After changing type of partition %s, all data on this partition will be lost")) or return;
- diskdrake::interactive::check_type($in, $type, $hd, $part) and fsedit::change_type($type, $hd, $part);
- } else {
- $part->{type} = $type;
- diskdrake::interactive::Create($in, $hd, $part, $all_hds);
- }
-}
-
-################################################################################
-# lvms: helpers
-################################################################################
-sub lvm2kind {
- my ($lvm) = @_;
- { type => 'lvm', name => $lvm->{LVMname}, val => $lvm };
-}
-
-################################################################################
-# raids: helpers
-################################################################################
-sub raid2kind {
- { type => 'raid', name => 'raid', val => $all_hds->{raids} };
-}
-
-################################################################################
-# loopbacks: helpers
-################################################################################
-sub loopback2kind {
- { type => 'loopback', name => 'loopback', val => $all_hds->{loopbacks} };
-}
-
-1;
diff --git a/perl-install/diskdrake/interactive.pm b/perl-install/diskdrake/interactive.pm
deleted file mode 100644
index 8c49f9570..000000000
--- a/perl-install/diskdrake/interactive.pm
+++ /dev/null
@@ -1,1171 +0,0 @@
-package diskdrake::interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use run_program;
-use loopback;
-use devices;
-use fsedit;
-use raid;
-use any;
-use log;
-use fs;
-
-
-=begin
-
-struct part {
- int active # one of { 0 | 0x80 } x86 only, primary only
- int start # in sectors
- int size # in sectors
- int type # 0x82, 0x83, 0x6 ...
- string device # 'hda5', 'sdc1' ...
- string rootDevice # 'sda', 'hdc' ...
- string real_mntpoint # directly on real /, '/tmp/hdimage' ...
- string mntpoint # '/', '/usr' ...
- string options # 'defaults', 'noauto'
- string device_windobe # 'C', 'D' ...
- string encrypt_key # [0-9A-Za-z./]{20,}
- string comment # comment to have in fstab
-
- bool isMounted
-
- bool isFormatted
- bool notFormatted
- # isFormatted means the device is formatted
- # !isFormatted && notFormatted means the device is not formatted
- # !isFormatted && !notFormatted means we don't know which state we're in
-
- int raid # for partitions of type isRawRAID and which isPartOfRAID, the raid device number
- string lvm # partition used as a PV for the VG with {lvm} as LVMname
- loopback loopback[] # loopback living on this partition
-
- # internal
- string real_device # '/dev/loop0', '/dev/loop1' ...
-
- # internal CHS (Cylinder/Head/Sector)
- int start_cyl, start_head, start_sec, end_cyl, end_head, end_sec,
-}
-
-struct part_allocate inherits part {
- int maxsize # in sectors (alike "size")
- int ratio #
- string hd # 'hda', 'hdc'
- string parts # for creating raid partitions. eg: 'foo bar' where 'foo' and 'bar' are mntpoint
-}
-
-struct part_raid inherits part {
- string chunk-size # usually '64k'
- string level # one of { 0, 1, 4, 5, 'linear' }
-
- part disks[]
-
- # invalid: active, start, rootDevice, device_windobe?, CHS
-}
-
-struct part_loopback inherits part {
- string loopback_file # absolute file name which is relative to the partition
- part loopback_device # where the loopback file live
-
- # device is special here: it is the absolute filename of the loopback file.
-
- # invalid: active, start, rootDevice, device_windobe, CHS
-}
-
-struct part_lvm inherits part {
- # invalid: active, start, device_windobe, CHS
-}
-
-
-struct partition_table_elem {
- part normal[] #
- part extended # the main/next extended
- part raw[4] # primary partitions
-}
-
-struct geom {
- int heads
- int sectors
- int cylinders
- int totalcylinders # for SUN, forget it
- int start # always 0, forget it
-}
-
-struct hd {
- int totalsectors # size in sectors
- string device # 'hda', 'sdc' ...
- string device_alias # 'cdrom', 'floppy' ...
- string media_type # one of { 'hd', 'cdrom', 'fd', 'tape' }
- string capacity # contain of the strings of { 'burner', 'DVD' }
- string info # name of the hd, eg: 'QUANTUM ATLAS IV 9 WLS'
-
- bool isDirty # does it need to be written to the disk
- bool needKernelReread # must we tell the kernel to reread the partition table
- bool hasBeenDirty # for undo
- bool rebootNeeded # happens when a kernel reread failed
- bool partitionsRenumbered # happens when you
- # - remove an extended partition which is not the last one
- # - add an extended partition which is the first extended partition
- int bus, id
-
- partition_table_elem primary
- partition_table_elem extended[]
-
- geom geom
-
- # internal
- string prefix # for some RAID arrays device=>c0d0 and prefix=>c0d0p
- string file # '/dev/hda' ...
-}
-
-struct hd_lvm inherits hd {
- int PE_size # block size (granularity, similar to cylinder size on x86)
- string LVMname # VG name
-
- part_lvm disks[]
-
- # invalid: bus, id, extended, geom
-}
-
-struct raw_hd inherits hd {
- string type # 0x82, 0x83, 'nfs', ...
- string mntpoint # '/', '/usr' ...
- string options # 'defaults', 'noauto'
-
- # invalid: isDirty, needKernelReread, hasBeenDirty, rebootNeeded, primary, extended
-}
-
-struct all_hds {
- hd hds[]
- hd_lvm lvms[]
- part_raid raids[] # indexed by number: raids[$n]{device} is "md$n"
- part_loopback loopbacks[]
- raw_hd raw_hds[]
- raw_hd nfss[]
- raw_hd smbs[]
- raw_hd special[]
-
- # internal: if fstab_to_string($all_hds) eq current_fstab then no need to save
- string current_fstab
-}
-
-
-=cut
-
-
-sub main {
- my ($in, $all_hds) = @_;
-
- if ($in->isa('interactive_gtk')) {
- require diskdrake::hd_gtk;
- goto &diskdrake::hd_gtk::main;
- }
-
- my ($current_part, $current_hd);
-
- while (1) {
- my $choose_txt = $current_part ? __("Choose another partition") : __("Choose a partition");
- my $parts_and_holes = [ fsedit::get_all_fstab_and_holes($all_hds) ];
- my $choose_part = sub {
- $current_part = $in->ask_from_listf('diskdrake', translate($choose_txt), sub { format_part_info_short(fsedit::part2hd($_[0], $all_hds), $_[0]) }, $parts_and_holes, $current_part) || return;
- $current_hd = fsedit::part2hd($current_part, $all_hds);
- };
-
- $choose_part->() if !$current_part;
- return if !$current_part;
-
- my %actions = my @actions = (
- if_($current_part,
- (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $current_hd, $current_part, $all_hds) } } part_possible_actions($in, $current_hd, $current_part, $all_hds)),
- '____________________________' => sub {},
- ),
- if_(@$parts_and_holes > 1, $choose_txt => $choose_part),
- if_($current_hd,
- (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $current_hd, $all_hds) } } hd_possible_actions_interactive($in, $current_hd, $all_hds)),
- ),
- (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $all_hds) } } general_possible_actions($in, $all_hds)),
- );
- my ($actions) = list2kv(@actions);
- my $a;
- if ($current_part) {
- $in->ask_from_({
- cancel => _("Exit"),
- title => 'diskdrake',
- messages => format_part_info($current_hd, $current_part),
- },
- [ { val => \$a, list => $actions, format => \&translate, type => 'list', sort => 0, gtk => { use_boxradio => 0 } } ]) or last;
- $actions{$a}();
- $current_hd = $current_part = '' if !is_part_existing($current_part, $all_hds);
- } else {
- $choose_part->();
- }
- partition_table::assign_device_numbers($_) foreach fsedit::all_hds($all_hds);
- }
- Done($in, $all_hds) or goto &main;
-}
-
-
-
-
-################################################################################
-# general actions
-################################################################################
-sub general_possible_actions {
- __("Undo"), ($::expert ? __("Toggle to normal mode") : __("Toggle to expert mode"));
-}
-
-
-sub Undo {
- my ($in, $all_hds) = @_;
- fsedit::undo($all_hds);
-}
-
-sub Wizard {
- $::o->{wizard} = 1;
- goto &Done;
-}
-
-sub Done {
- my ($in, $all_hds) = @_;
- eval { raid::verify($all_hds->{raids}) };
- if (my $err = $@) {
- $::expert or die;
- $in->ask_okcancel('', [ formatError($err), _("Continue anyway?")]) or return;
- }
- foreach (@{$all_hds->{hds}}) {
- if (!write_partitions($in, $_)) {
- return if !$::isStandalone;
- $in->ask_yesorno(_("Quit without saving"), _("Quit without writing the partition table?"), 1) or return;
- }
- }
- if (!$::isInstall) {
- my $new = fs::fstab_to_string($all_hds);
- if ($new ne $all_hds->{current_fstab} && $in->ask_yesorno('', _("Do you want to save /etc/fstab modifications"), 1)) {
- $all_hds->{current_fstab} = $new;
- fs::write_fstab($all_hds);
- }
- }
- 1;
-}
-
-################################################################################
-# per-hd actions
-################################################################################
-sub hd_possible_actions {
- __("Clear all"), if_($::isInstall, __("Auto allocate")), __("More");
-}
-sub hd_possible_actions_interactive {
- hd_possible_actions(), __("Hard drive information");
-}
-
-sub Clear_all {
- my ($in, $hd, $all_hds) = @_;
-
- my @parts = partition_table::get_normal_parts($hd);
- foreach (@parts) {
- RemoveFromLVM($in, $hd, $_, $all_hds) if isPartOfLVM($_);
- RemoveFromRAID($in, $hd, $_, $all_hds) if isPartOfRAID($_);
- }
- if (isLVM($hd)) {
- lvm::lv_delete($hd, $_) foreach @parts
- } else {
- partition_table_raw::zero_MBR_and_dirty($hd);
- }
-}
-
-sub Auto_allocate {
- my ($in, $hd, $all_hds) = @_;
- my $suggestions = partitions_suggestions($in) or return;
-
- my %all_hds_ = %$all_hds;
- $all_hds_{hds} = [ sort { $a == $hd ? -1 : 1 } @{$all_hds->{hds}} ];
-
- eval { fsedit::auto_allocate(\%all_hds_, $suggestions) };
- if ($@) {
- $@ =~ /partition table already full/ or die;
-
- $in->ask_warn("", [
- _("All primary partitions are used"),
- _("I can't add any more partition"),
- _("To have more partitions, please delete one to be able to create an extended partition"),
- ]);
- }
-}
-
-sub More {
- my ($in, $hd) = @_;
-
- $in->ask_from('', '',
- [
- { val => _("Save partition table"), clicked_may_quit => sub { SaveInFile($in, $hd); 1 } },
- { val => _("Restore partition table"), clicked_may_quit => sub { ReadFromFile($in, $hd); 1 } },
- { val => _("Rescue partition table"), clicked_may_quit => sub { Rescuept($in, $hd); 1 } },
- if_($::isInstall,
- { val => _("Reload partition table"), clicked => sub {
- $::o->{all_hds} = fsedit::empty_all_hds();
- die "setstep doPartitionDisks\n" if $::setstep;
- } }),
- if_($::isInstall,
- { text => _("Removable media automounting"), val => \$::o->{useSupermount}, type => 'bool' },
- ),
- ],
- );
-}
-
-sub ReadFromFile {
- my ($in, $hd) = @_;
-
- my $file = $::isStandalone ? $in->ask_file(_("Select file")) : devices::make("fd0") or return;
-
- eval {
- catch_cdie { partition_table::load($hd, $file) }
- sub {
- $@ =~ /bad totalsectors/ or return;
- $in->ask_yesorno('',
-_("The backup partition table has not the same size
-Still continue?"), 0);
- };
- };
- if (my $err = $@) {
- $in->ask_warn(_("Error"), formatError($err));
- }
-}
-
-sub SaveInFile {
- my ($in, $hd) = @_;
-
- my $file = $::isStandalone ?
- $in->ask_file(_("Select file")) :
- $in->ask_okcancel(_("Warning"),
-_("Insert a floppy in drive
-All data on this floppy will be lost"), 1) && devices::make(detect_devices::floppy()) or return;
-
- eval { partition_table::save($hd, $file) };
- if (my $err = $@) {
- $in->ask_warn(_("Error"), formatError($err));
- }
-}
-
-sub Rescuept {
- my ($in, $hd) = @_;
- my $w = $in->wait_message('', _("Trying to rescue partition table"));
- fsedit::rescuept($hd);
-}
-
-sub Hd_info {
- my ($in, $hd) = @_;
- $in->ask_warn('', [ _("Detailed information"), format_hd_info($hd) ]);
-}
-
-################################################################################
-# per-part actions
-################################################################################
-
-sub part_possible_actions {
- my ($in, $hd, $part, $all_hds) = @_;
- $part or return;
-
- my %actions = my @l = (
- __("Mount point") => '($part->{real_mntpoint} && common::usingRamdisk()) || (!isBusy && !isSwap && !isNonMountable)',
- __("Type") => '!isBusy && $::expert',
- __("Options") => '$::expert',
- __("Resize") => '!isBusy && !isSpecial || isLVM($hd) && isMounted && isThisFs("xfs", $part)',
- __("Move") => '!isBusy && !isSpecial && $::expert && 0', # disable for the moment
- __("Format") => '!isBusy && ($::expert || $::isStandalone)',
- __("Mount") => '!isBusy && (hasMntpoint || isSwap) && maybeFormatted && ($::expert || $::isStandalone)',
- __("Add to RAID") => '!isBusy && isRawRAID && !isSpecial',
- __("Add to LVM") => '!isBusy && isRawLVM',
- __("Unmount") => '!$part->{real_mntpoint} && isMounted',
- __("Delete") => '!isBusy',
- __("Remove from RAID") => 'isPartOfRAID',
- __("Remove from LVM") => 'isPartOfLVM',
- __("Modify RAID") => 'isPartOfRAID && !isMounted($all_hds->{raids}[$part->{raid}])',
- __("Use for loopback") => '!$part->{real_mntpoint} && isMountableRW && !isSpecial && hasMntpoint && $::expert',
- );
- my ($actions_names) = list2kv(@l);
- my %macros = (
- hasMntpoint => '$part->{mntpoint}',
- isPrimary => 'isPrimary($part, $hd)',
- );
- if ($part->{type} == 0) {
- __("Create");
- } else {
- grep {
- my $cond = $actions{$_};
- while (my ($k, $v) = each %macros) {
- $cond =~ s/$k/qq(($v))/e;
- }
- $cond =~ s/(^|[^:\$]) \b ([a-z]\w{3,}) \b ($|[\s&\)])/$1 . $2 . '($part)' . $3/exg;
- eval $cond;
- } @$actions_names;
- }
-}
-
-sub Create {
- my ($in, $hd, $part, $all_hds) = @_;
- my ($def_start, $def_size, $max) = ($part->{start}, $part->{size}, $part->{start} + $part->{size});
-
- $part->{maxsize} = $part->{size}; $part->{size} = 0;
- if (!fsedit::suggest_part($part, $all_hds)) {
- $part->{size} = $part->{maxsize};
- $part->{type} ||= 0x483;
- }
-
- #- update adjustment for start and size, take into account the minimum partition size
- #- including one less sector for start due to a capacity to increase the adjustement by
- #- one.
- my ($primaryOrExtended, $migrate_files);
- my $type = type2name($part->{type});
- my $mb_size = $part->{size} >> 11;
- my $has_startsector = ($::expert || arch() !~ /i.86/) && !isLVM($hd);
-
- my $w = $in->ask_from(_("Create a new partition"), '',
- [
- if_($has_startsector,
- { label => _("Start sector: "), val => \$part->{start}, min => $def_start, max => ($max - min_partition_size($hd)), type => 'range' },
- ),
- { label => _("Size in MB: "), val => \$mb_size, min => min_partition_size($hd) >> 11, max => $def_size >> 11, type => 'range' },
- { label => _("Filesystem type: "), val => \$type, list => [ partition_table::important_types() ], sort => 0 },
- { label => _("Mount point: "), val => \$part->{mntpoint}, list => [ fsedit::suggestions_mntpoint($all_hds), '' ],
- disabled => sub { my $p = { type => name2type($type) }; isSwap($p) || isNonMountable($p) }, type => 'combo', not_edit => 0,
- },
- if_($::expert && $hd->hasExtended,
- { label => _("Preference: "), val => \$primaryOrExtended, list => [ '', "Extended", "Primary", if_($::expert, "Extended_0x85") ] },
- ),
- ], changed => sub {
- if ($part->{start} + ($mb_size << 11) > $max) {
- if ($_[0] == 0) {
- # Start sector changed => restricting Size
- $mb_size = ($max - $part->{start}) >> 11;
- } else {
- # Size changed => restricting Start sector
- $part->{start} = $max - ($mb_size << 11);
- }
- }
- }, complete => sub {
- $part->{size} = from_Mb($mb_size, min_partition_size($hd), $max - $part->{start}); #- need this to be able to get back the approximation of using MB
- $part->{type} = name2type($type);
- $part->{mntpoint} = '' if isNonMountable($part);
- $part->{mntpoint} = 'swap' if isSwap($part);
- fs::set_default_options($part);
-
- check($in, $hd, $part, $all_hds) or return 1;
- $migrate_files = need_migration($in, $part->{mntpoint}) or return 1;
-
- fsedit::add($hd, $part, $all_hds, { force => 1, primaryOrExtended => $primaryOrExtended });
- 0;
- },
- ) or return;
-
- warn_if_renumbered($in, $hd);
-
- if ($migrate_files eq 'migrate') {
- format_($in, $hd, $part, $all_hds) or return;
- migrate_files($in, $hd, $part);
- fs::mount_part($part);
- }
-}
-
-sub Delete {
- my ($in, $hd, $part, $all_hds) = @_;
- if (isRAID($part)) {
- raid::delete($all_hds->{raids}, $part);
- } elsif (isLVM($hd)) {
- lvm::lv_delete($hd, $part);
- } elsif (isLoopback($part)) {
- my $f = "$part->{loopback_device}{mntpoint}$part->{loopback_file}";
- if (-e $f && $in->ask_yesorno('', _("Remove the loopback file?"))) {
- unlink $f;
- }
- my $l = $part->{loopback_device}{loopback};
- @$l = grep { $_ != $part } @$l;
- delete $part->{loopback_device}{loopback} if @$l == 0;
- fsedit::recompute_loopbacks($all_hds);
- } else {
- if (arch() =~ /ppc/) {
- undef $partition_table_mac::bootstrap_part if (isAppleBootstrap($part) && ($part->{device} = $partition_table_mac::bootstrap_part));
- }
- partition_table::remove($hd, $part);
- warn_if_renumbered($in, $hd);
- }
-}
-
-sub Type {
- my ($in, $hd, $part) = @_;
-
- my $warn = sub { ask_alldatawillbelost($in, $part, __("After changing type of partition %s, all data on this partition will be lost")) };
-
- #- for ext2, warn after choosing as ext2->ext3 can be achieved without loosing any data :)
- isExt2($part) or $warn->() or return;
-
- my $type_name = type2name($part->{type});
- $in->ask_from(_("Change partition type"),
- _("Which filesystem do you want?"),
- [ { label => _("Type"), val => \$type_name, list => [ partition_table::important_types() ], sort => 0, not_edit => !$::expert } ]) or return;
-
- my $type = $type_name && name2type($type_name);
-
- if (isExt2($part) && isThisFs('ext3', { type => $type })) {
- my $w = $in->wait_message('', _("Switching from ext2 to ext3"));
- if (run_program::run("tune2fs", "-j", devices::make($part->{device}))) {
- $part->{type} = $type;
- $part->{isFormatted} = 1; #- assume that if tune2fs works, partition is formatted
-
- #- disable the fsck (don't do it together with -j in case -j fails?)
- fs::disable_forced_fsck($part->{device});
- return;
- }
- }
- #- either we switch to non-ext3 or switching losslessly to ext3 failed
- !isExt2($part) or $warn->() or return;
-
- if (defined $type) {
- check_type($in, $type, $hd, $part) and fsedit::change_type($type, $hd, $part);
- }
-}
-
-sub Mount_point {
- my ($in, $hd, $part, $all_hds) = @_;
-
- my $migrate_files;
- my $mntpoint = $part->{mntpoint} || do {
- my $part_ = { %$part };
- if (fsedit::suggest_part($part_, $all_hds)) {
- fsedit::has_mntpoint('/', $all_hds) || $part_->{mntpoint} eq '/boot' ? $part_->{mntpoint} : '/';
- } else { '' }
- };
- $in->ask_from(
- '',
- isLoopback($part) ? _("Where do you want to mount loopback file %s?", $part->{loopback_file}) :
- _("Where do you want to mount device %s?", $part->{device}),
- [ { label => _("Mount point"), val => \$mntpoint,
- list => [ if_($mntpoint, $mntpoint), fsedit::suggestions_mntpoint($all_hds), '' ],
- not_edit => !$::expert } ],
- complete => sub {
- !isPartOfLoopback($part) || $mntpoint or $in->ask_warn('',
-_("Can't unset mount point as this partition is used for loop back.
-Remove the loopback first")), return 1;
- $part->{mntpoint} eq $mntpoint || check_mntpoint($in, $mntpoint, $hd, $part, $all_hds) or return 1;
- $migrate_files = need_migration($in, $mntpoint) or return 1;
- 0;
- }
- ) or return;
- $part->{mntpoint} = $mntpoint;
-
- if ($migrate_files eq 'migrate') {
- format_($in, $hd, $part, $all_hds) or return;
- migrate_files($in, $hd, $part);
- fs::mount_part($part);
- }
-}
-sub Mount_point_raw_hd {
- my ($in, $part, $all_hds, $propositions) = @_;
-
- my $mntpoint = $part->{mntpoint};
- $in->ask_from(
- '',
- _("Where do you want to mount device %s?", $part->{device}),
- [ { label => _("Mount point"), val => \$mntpoint,
- list => [ if_($mntpoint, $mntpoint), '', @$propositions ],
- not_edit => 0 } ],
- complete => sub {
- $part->{mntpoint} eq $mntpoint || check_mntpoint($in, $mntpoint, {}, $part, $all_hds) or return 1;
- 0;
- }
- ) or return;
- $part->{mntpoint} = $mntpoint;
-}
-
-sub Resize {
- my ($in, $hd, $part) = @_;
- my (%nice_resize, $block_count, $free_block, $block_size);
- my ($min, $max) = (min_partition_size($hd), partition_table::next_start($hd, $part) - $part->{start});
-
- if (maybeFormatted($part)) {
- # here we may have a non-formatted or a formatted partition
- # -> doing as if it was formatted
-
- if (isFat($part)) {
- write_partitions($in, $hd) or return;
- #- try to resize without losing data
- my $w = $in->wait_message(_("Resizing"), _("Computing FAT filesystem bounds"));
-
- $nice_resize{fat} = resize_fat::main->new($part->{device}, devices::make($part->{device}));
- $min = max($min, $nice_resize{fat}->min_size);
- $max = min($max, $nice_resize{fat}->max_size);
- } elsif (isExt2($part) || isThisFs('ext3', $part)) {
- write_partitions($in, $hd) or return;
- $nice_resize{ext2} = devices::make($part->{device});
- my $r = `dumpe2fs $nice_resize{ext2} 2>/dev/null`;
- $r =~ /Block count:\s*(\d+)/ and $block_count = $1;
- $r =~ /Free blocks:\s*(\d+)/ and $free_block = $1;
- $r =~ /Block size:\s*(\d+)/ and $block_size = $1;
- log::l("dumpe2fs $nice_resize{ext2} gives: Block_count=$block_count, Free_blocks=$free_block, Block_size=$block_size");
- if ($block_count && $free_block && $block_size) {
- $min = max($min, ($block_count - $free_block) * $block_size / 512);
- $max = min($max, $block_count * $block_size / 512);
- } else {
- delete $nice_resize{ext2};
- }
- } elsif (isThisFs("reiserfs", $part)) {
- write_partitions($in, $hd) or return;
- if (defined (my $free = fs::df($part))) {
- $nice_resize{reiserfs} = 1;
- $min = max($min, $free);
- }
- } elsif (isThisFs('xfs', $part) && isLVM($hd) && $::isStandalone && isMounted($part)) {
- $min = $part->{size}; #- ensure the user can only increase
- $nice_resize{xfs} = 1;
- }
- #- make sure that even after normalizing the size to cylinder boundaries, the minimun will be saved,
- #- this save at least a cylinder (less than 8Mb).
- $min += partition_table_raw::cylinder_size($hd);
- $min >= $max and return $in->ask_warn('', _("This partition is not resizeable"));
-
- #- for these, we have tools to resize partition table
- #- without losing data (or at least we hope so :-)
- if (%nice_resize) {
- ask_alldatamaybelost($in, $part, __("All data on this partition should be backed-up")) or return;
- } else {
- ask_alldatawillbelost($in, $part, __("After resizing partition %s, all data on this partition will be lost")) or return;
- }
- }
-
- my $mb_size = $part->{size} >> 11;
- $in->ask_from(_("Resize"), _("Choose the new size"), [
- { label => _("New size in MB: "), val => \$mb_size, min => $min >> 11, max => $max >> 11, type => 'range' },
- ]) or return;
-
-
- my $size = from_Mb($mb_size, $min, $max);
- $part->{size} == $size and return;
-
- my $oldsize = $part->{size};
- $hd->{isDirty} = $hd->{needKernelReread} = 1;
- $part->{size} = $size;
- $hd->adjustEnd($part);
-
- undef $@;
- my $b = before_leaving { $@ and $part->{size} = $oldsize };
- my $w = $in->wait_message(_("Resizing"), '');
-
- if (isLVM($hd)) {
- lvm::lv_resize($part, $oldsize) if $size > $oldsize;
- }
-
- if ($nice_resize{fat}) {
- local *log::l = sub { $w->set(join(' ', @_)) };
- $nice_resize{fat}->resize($part->{size});
- } elsif ($nice_resize{ext2}) {
- my $s = int(($part->{size} << 9) / $block_size);
- log::l("resize2fs $nice_resize{ext2} to size $s in block of $block_size bytes");
- system "resize2fs", "-pf", $nice_resize{ext2}, $s;
- } elsif ($nice_resize{reiserfs}) {
- log::l("reiser resize to $part->{size} sectors");
- install_any::check_prog ("resize_reiserfs") if $::isInstall;
- system "resize_reiserfs", "-f", "-q", "-s" . $part->{size}/2 . "K", devices::make($part->{device});
- } elsif ($nice_resize{xfs}) {
- system "xfs_growfs", $part->{mntpoint};
- }
-
- if (%nice_resize) {
- $part->{isFormatted} = 1;
- } else {
- $part->{notFormatted} = 1;
- $part->{isFormatted} = 0;
- partition_table::verifyParts($hd);
- }
-
- if (isLVM($hd)) {
- lvm::lv_resize($part, $oldsize) if $size < $oldsize;
- } else {
- partition_table::adjust_local_extended($hd, $part);
- partition_table::adjust_main_extended($hd);
- }
-}
-sub Move {
- my ($in, $hd, $part, $all_hds) = @_;
- my $hd2 = $in->ask_from_listf(_("Move"),
- _("Which disk do you want to move it to?"), \&partition_table::description, @{$all_hds->{hds}}) or return;
- my $start2 = $in->ask_from_entry(_("Sector"),
- _("Which sector do you want to move it to?"));
- defined $start2 or return;
-
- my $w = $in->wait_message(_("Moving"), _("Moving partition..."));
- fsedit::move($hd, $part, $hd2, $start2);
-}
-sub Format {
- my ($in, $hd, $part, $all_hds) = @_;
- format_($in, $hd, $part, $all_hds);
-}
-sub Mount {
- my ($in, $hd, $part) = @_;
- write_partitions($in, $hd) or return;
- fs::mount_part($part);
-}
-sub Add2RAID {
- my ($in, $hd, $part, $all_hds) = @_;
- my $raids = $all_hds->{raids};
-
- local $_ = @$raids == () ? "new" :
- $in->ask_from_list_('', _("Choose an existing RAID to add to"),
- [ (grep {$_} map_index { $_ && "md$::i" } @$raids), __("new") ]) or return;
-
- if (/new/) {
- my $nb1 = raid::new($raids, $part);
- defined modifyRAID($in, $raids, $nb1) or return raid::delete($raids, $nb1);
- } else {
- raid::add($raids, $part, $_);
- }
- raid::update(@$raids);
-}
-sub Add2LVM {
- my ($in, $hd, $part, $all_hds) = @_;
- my $lvms = $all_hds->{lvms};
- write_partitions($in, $_) or return foreach isRAID($part) ? @{$all_hds->{hds}} : $hd;
-
- my $lvm = $in->ask_from_listf_('', _("Choose an existing LVM to add to"),
- sub { ref $_[0] ? $_[0]{LVMname} : $_[0] },
- [ @$lvms, __("new") ]) or return;
- if (!ref $lvm) {
- # create new lvm
- my $name = $in->ask_from_entry('', _("LVM name?")) or return;
- $name =~ s/\W/_/g;
- $name = substr($name, 0, 63); # max length must be < NAME_LEN / 2 where NAME_LEN is 128
- $lvm = bless { disks => [], LVMname => $name }, 'lvm';
- push @$lvms, $lvm;
- }
- $part->{lvm} = $lvm->{LVMname};
- push @{$lvm->{disks}}, $part;
- delete $part->{mntpoint};
-
- require lvm;
- lvm::check($in) if $::isStandalone;
- lvm::vg_add($part);
- lvm::update_size($lvm);
-}
-sub Unmount {
- my ($in, $hd, $part) = @_;
- fs::umount_part($part);
-}
-sub RemoveFromRAID {
- my ($in, $hd, $part, $all_hds) = @_;
- raid::removeDisk($all_hds->{raids}, $part);
-}
-sub RemoveFromLVM {
- my ($in, $hd, $part, $all_hds) = @_;
- my $lvms = $all_hds->{lvms};
- isPartOfLVM($part) or die;
- my ($lvm) = grep { $_->{LVMname} eq $part->{lvm} } @$lvms;
- lvm::vg_destroy($lvm);
- @$lvms = grep { $_ != $lvm } @$lvms;
-}
-sub ModifyRAID {
- my ($in, $hd, $part, $all_hds) = @_;
- modifyRAID($in, $all_hds->{raids}, $part->{raid});
-}
-sub Loopback {
- my ($in, $hd, $real_part, $all_hds) = @_;
-
- write_partitions($in, $hd) or return;
-
- my $handle = any::inspect($real_part) or $in->ask_warn('', _("This partition can't be used for loopback")), return;
-
- my ($min, $max) = (1, loopback::getFree($handle->{dir}, $real_part));
- my $part = { maxsize => $max, size => 0, loopback_device => $real_part, notFormatted => 1 };
- if (!fsedit::suggest_part($part, $all_hds)) {
- $part->{size} = $part->{maxsize};
- $part->{type} ||= 0x483;
- }
- delete $part->{mntpoint}; # we don't want the suggested mntpoint
-
- my $type = type2name($part->{type});
- my $mb_size = $part->{size} >> 11;
- $in->ask_from(_("Loopback"), '', [
- { label => _("Loopback file name: "), val => \$part->{loopback_file} },
- { label => _("Size in MB: "), val => \$mb_size, min => $min >> 11, max => $max >> 11, type => 'range' },
- { label => _("Filesystem type: "), val => \$type, list => [ partition_table::important_types() ], not_edit => !$::expert, sort => 0 },
- ],
- complete => sub {
- $part->{loopback_file} or $in->ask_warn('', _("Give a file name")), return 1, 0;
- $part->{loopback_file} =~ s|^([^/])|/$1|;
- if (my $size = loopback::verifFile($handle->{dir}, $part->{loopback_file}, $real_part)) {
- $size == -1 and $in->ask_warn('', _("File already used by another loopback, choose another one")), return 1, 0;
- $in->ask_yesorno('', _("File already exists. Use it?")) or return 1, 0;
- delete $part->{notFormatted};
- $part->{size} = divide($size, 512);
- } else {
- $part->{size} = from_Mb($mb_size, $min, $max);
- }
- 0;
- }) or return;
- $part->{type} = name2type($type);
- push @{$real_part->{loopback}}, $part;
- fsedit::recompute_loopbacks($all_hds);
-}
-
-sub Options {
- my ($in, $hd, $part, $all_hds) = @_;
-
- my @simple_options = qw(user noauto supermount);
-
- my (undef, $user_implies) = fs::mount_options();
- my ($options, $unknown) = fs::mount_options_unpack($part);
- my %help = fs::mount_options_help(keys %$options);
-
- my $prev_user = $options->{user};
- $in->ask_from(_("Mount options"),
- '',
- [
- (map {;
- { label => $_, text => scalar warp_text(formatAlaTeX($help{$_})), val => \$options->{$_},
- advanced => !$part->{rootDevice} && !member($_, @simple_options), if_(!/=$/, type => 'bool'), }
- } keys %$options),
- { label => _("Various"), val => \$unknown, advanced => 1 },
- ],
- changed => sub {
- if ($prev_user != $options->{user}) {
- $prev_user = $options->{user};
- $options->{$_} = $options->{user} foreach @$user_implies;
- }
- if ($options->{encrypted}) {
- # modify $part->{options} for the check
- local $part->{options};
- fs::mount_options_pack($part, $options, $unknown);
- if (!check($in, $hd, $part, $all_hds)) {
- $options->{encrypted} = 0;
- } elsif (!$part->{encrypt_key} && !isSwap($part)) {
- if (my $encrypt_key = choose_encrypt_key($in)) {
- $options->{'encryption='} = 'AES128';
- $part->{encrypt_key} = $encrypt_key;
- } else {
- $options->{encrypted} = 0;
- }
- }
- } else {
- delete $options->{'encryption='};
- delete $part->{encrypt_key};
- }
- },
- ) or return;
-
- fs::mount_options_pack($part, $options, $unknown);
-}
-
-
-{
- no strict;
- *{"Toggle to normal mode"} = sub { $::expert = 0 };
- *{"Toggle to expert mode"} = sub { $::expert = 1 };
- *{"Clear all"} = *Clear_all;
- *{"Auto allocate"} = *Auto_allocate;
- *{"Mount point"} = *Mount_point;
- *{"Modify RAID"} = *ModifyRAID;
- *{"Add to RAID"} = *Add2RAID;
- *{"Remove from RAID"} = *RemoveFromRAID;
- *{"Add to LVM"} = *Add2LVM;
- *{"Remove from LVM"} = *RemoveFromLVM;
- *{"Use for loopback"} = *Loopback;
- *{"Hard drive information"} = *Hd_info;
-}
-
-
-################################################################################
-# helpers
-################################################################################
-
-sub is_part_existing {
- my ($part, $all_hds) = @_;
- $part && grep { fsedit::is_same_part($part, $_) } fsedit::get_all_fstab_and_holes($all_hds);
-}
-
-sub modifyRAID {
- my ($in, $raids, $nb) = @_;
- my $md = "md$nb";
- $in->ask_from('', '',
- [
-{ label => _("device"), val => \$md, list => [ map { "md$_" } grep { $nb == $_ || !$raids->[$_] } 0..8 ] },
-{ label => _("level"), val => \$raids->[$nb]{level}, list => [ qw(0 1 4 5 linear) ] },
-{ label => _("chunk size"), val => \$raids->[$nb]{'chunk-size'} },
- ],
- ) or return;
- raid::updateSize($raids->[$nb]); # changing the raid level changes the size available
- raid::changeNb($raids, $nb, first($md =~ /(\d+)/));
-}
-
-
-sub ask_alldatamaybelost {
- my ($in, $part, $msg) = @_;
-
- maybeFormatted($part) or return 1;
-
- #- here we may have a non-formatted or a formatted partition
- #- -> doing as if it was formatted
- $in->ask_okcancel(_("Read carefully!"), [ _("Be careful: this operation is dangerous."), _($msg, $part->{device}) ], 1);
-}
-sub ask_alldatawillbelost {
- my ($in, $part, $msg) = @_;
-
- maybeFormatted($part) or return 1;
-
- #- here we may have a non-formatted or a formatted partition
- #- -> doing as if it was formatted
- $in->ask_okcancel(_("Read carefully!"), _($msg, $part->{device}), 1);
-}
-
-sub partitions_suggestions {
- my ($in) = @_;
- my $t = $::expert ?
- $in->ask_from_list_('', _("What type of partitioning?"), [ keys %fsedit::suggestions ]) :
- 'simple';
- $fsedit::suggestions{$t};
-}
-
-sub check_type {
- my ($in, $type, $hd, $part) = @_;
- eval { fsedit::check_type($type, $hd, $part) };
- if (my $err = $@) {
- $in->ask_warn('', $err);
- return;
- }
- if ($::isStandalone) {
- if (my $pkg = fsedit::package_needed_for_partition_type({ type => $type })) {
- my $fs = type2fs({ type => $type });
- if (!-x "/sbin/mkfs.$fs") {
- $in->ask_yesorno('', _("The package %s is needed. Install it?", $pkg), 1) or return;
- $in->do_pkgs->install($pkg);
- }
- -x "/sbin/mkfs.$fs" or $in->ask_warn('', "Mandatory package $pkg is missing"), return;
- }
- }
- 1;
-}
-sub check_mntpoint {
- my ($in, $mntpoint, $hd, $part, $all_hds) = @_;
- eval { fsedit::check_mntpoint($mntpoint, $hd, $part, $all_hds) };
- local $_ = $@;
- if (m|/boot ending on cylinder > 1024|) {
- $in->ask_warn('',
-_("Sorry I won't accept to create /boot so far onto the drive (on a cylinder > 1024).
-Either you use LILO and it won't work, or you don't use LILO and you don't need /boot"));
- } elsif (m|/ ending on cylinder > 1024|) {
- $in->ask_warn('',
-_("The partition you've selected to add as root (/) is physically located beyond
-the 1024th cylinder of the hard drive, and you have no /boot partition.
-If you plan to use the LILO boot manager, be careful to add a /boot partition"));
- undef $_;
- } elsif (m|raid / with no /boot|) {
- $in->ask_warn('',
-_("You've selected a software RAID partition as root (/).
-No bootloader is able to handle this without a /boot partition.
-So be careful to add a /boot partition"));
- undef $_;
- } elsif ($_) {
- $in->ask_warn('', formatError($_));
- }
- !$_;
-}
-sub check {
- my ($in, $hd, $part, $all_hds) = @_;
- check_type($in, $part->{type}, $hd, $part) &&
- check_mntpoint($in, $part->{mntpoint}, $hd, $part, $all_hds);
-}
-
-sub write_partitions {
- my ($in, $hd) = @_;
- $hd->{isDirty} or return 1;
- isLVM($hd) and return 1;
-
- $in->ask_okcancel(_("Read carefully!"), _("Partition table of drive %s is going to be written to disk!", $hd->{device}), 1) or return;
- if (!$::testing) {
- partition_table::write($hd);
- }
- $hd->{rebootNeeded} and die _("You'll need to reboot before the modification can take place");
- 1;
-}
-
-sub unmount {
- my ($hd, $part) = @_;
- fs::umount_part($part);
-}
-sub format_ {
- my ($in, $hd, $part, $all_hds) = @_;
- write_partitions($in, $_) or return foreach isRAID($part) ? @{$all_hds->{hds}} : $hd;
- ask_alldatawillbelost($in, $part, __("After formatting partition %s, all data on this partition will be lost")) or return;
- $part->{isFormatted} = 0; #- force format;
- my $w = $in->wait_message(_("Formatting"),
- isLoopback($part) ? _("Formatting loopback file %s", $part->{loopback_file}) :
- _("Formatting partition %s", $part->{device}));
- fs::format_part($all_hds->{raids}, $part);
- 1;
-}
-
-sub need_migration {
- my ($in, $mntpoint) = @_;
-
- my @l = grep { $_ ne "lost+found" } all($mntpoint);
- if (@l && $::isStandalone) {
- my $choice;
- my @choices = (__("Move files to the new partition"), __("Hide files"));
- $in->ask_from('', _("Directory %s already contains data\n(%s)", $mntpoint, formatList(5, @l)),
- [ { val => \$choice, list => \@choices, type => 'list' } ]) or return;
- $choice eq $choices[0] ? 'migrate' : 'hide';
- } else {
- 'hide';
- }
-}
-
-sub migrate_files {
- my ($in, $hd, $part, $all_hds) = @_;
-
- my $wait = $in->wait_message('', _("Moving files to the new partition"));
- my $handle = any::inspect($part, '', 'rw');
- my @l = glob_("$part->{mntpoint}/*");
- foreach (@l) {
- $wait->set(_("Copying %s", $_));
- system("cp", "-a", $_, $handle->{dir});
- }
- foreach (@l) {
- $wait->set(_("Removing %s", $_));
- system("rm", "-rf", $_);
- }
-}
-
-sub warn_if_renumbered {
- my ($in, $hd) = @_;
- my $l = delete $hd->{partitionsRenumbered};
- return if is_empty_array_ref($l);
-
- my @l = map { _("partition %s is now known as %s", @$_) } @$l;
- $in->ask_warn('', join("\n", 'Partitions have been renumbered: ', @l));
-}
-
-#- unit of $mb is mega bytes, min and max are in sectors, this
-#- function is used to convert back to sectors count the size of
-#- a partition ($mb) given from the interface (on Resize or Create).
-#- modified to take into account a true bounding with min and max.
-sub from_Mb {
- my ($mb, $min, $max) = @_;
- $mb <= $min >> 11 and return $min;
- $mb >= $max >> 11 and return $max;
- $mb * 2048;
-}
-
-sub format_part_info {
- my ($hd, $part) = @_;
-
- my $info = '';
-
- $info .= _("Mount point: ") . "$part->{mntpoint}\n" if $part->{mntpoint};
- $info .= _("Device: ") . "$part->{device}\n" if $part->{device} && !isLoopback($part);
- $info .= _("DOS drive letter: %s (just a guess)\n", $part->{device_windobe}) if $part->{device_windobe};
- if (arch() eq "ppc") {
- my $new_value = $part->{pType};
- $new_value =~ s/[^A-Za-z0-9_]//g;
- $info .= _("Type: ") . $new_value . ($::expert ? sprintf " (0x%x)", $part->{type} : '') . "\n";
- if (defined $part->{pName}) {
- $new_value = $part->{pName};
- $new_value =~ s/[^A-Za-z0-9_]//g;
- $info .= _("Name: ") . $new_value . "\n";
- }
- } elsif ($part->{type}) {
- my $type = substr(type2name($part->{type}), 0, 40); # limit the length
- $info .= _("Type: ") . $type . ($::expert ? sprintf " (0x%x)", $part->{type} : '') . "\n";
- } else {
- $info .= _("Empty") . "\n";
- }
- $info .= _("Start: sector %s\n", $part->{start}) if $::expert && !isSpecial($part);
- $info .= _("Size: %s", formatXiB($part->{size}, 512));
- $info .= sprintf " (%s%%)", int 100 * $part->{size} / $hd->{totalsectors} if $hd->{totalsectors};
- $info .= _(", %s sectors", $part->{size}) if $::expert;
- $info .= "\n";
- $info .= _("Cylinder %d to %d\n", $part->{start} / $hd->cylinder_size(), ($part->{start} + $part->{size} - 1) / $hd->cylinder_size()) if ($::expert || !$part->{type}) && !isSpecial($part);
- $info .= _("Formatted\n") if $part->{isFormatted};
- $info .= _("Not formatted\n") if !$part->{isFormatted} && $part->{notFormatted};
- $info .= _("Mounted\n") if $part->{isMounted};
- $info .= _("RAID md%s\n", $part->{raid}) if isPartOfRAID($part);
- $info .= sprintf "LVM %s\n", $part->{lvm} if isPartOfLVM($part);
- $info .= _("Loopback file(s):\n %s\n", join(", ", map { $_->{loopback_file} } @{$part->{loopback}})) if isPartOfLoopback($part);
- $info .= _("Partition booted by default\n (for MS-DOS boot, not for lilo)\n") if $part->{active} && $::expert;
- if (isRAID($part)) {
- $info .= _("Level %s\n", $part->{level});
- $info .= _("Chunk size %s\n", $part->{'chunk-size'});
- $info .= _("RAID-disks %s\n", join ", ", map { $_->{device} } @{$part->{disks}});
- } elsif (isLoopback($part)) {
- $info .= _("Loopback file name: %s", $part->{loopback_file});
- }
- if (isApple($part)) {
- $info .= _("\nChances are, this partition is\na Driver partition, you should\nprobably leave it alone.\n");
- }
- if (isAppleBootstrap($part)) {
- $info .= _("\nThis special Bootstrap\npartition is for\ndual-booting your system.\n");
- }
- # restrict the length of the lines
- $info =~ s/(.{60}).*/$1.../mg;
- $info;
-}
-
-sub format_part_info_short {
- my ($hd, $part) = @_;
- $part->{type} ?
- partition_table::description($part) :
- format_part_info($hd, $part);
-}
-
-sub format_hd_info {
- my ($hd) = @_;
-
- my $info = '';
- $info .= _("Device: ") . "$hd->{device}\n";
- $info .= _("Size: %s\n", formatXiB($hd->{totalsectors}, 512)) if $hd->{totalsectors};
- $info .= _("Geometry: %s cylinders, %s heads, %s sectors\n", @{$hd->{geom}}{qw(cylinders heads sectors)}) if $::expert && $hd->{geom};
- $info .= _("Info: ") . ($hd->{info} || $hd->{media_type}) . "\n" if $::expert && ($hd->{info} || $hd->{media_type});
- $info .= _("LVM-disks %s\n", join ", ", map {$_->{device}} @{$hd->{disks}}) if isLVM($hd) && $hd->{disks};
- $info .= _("Partition table type: %s\n", $1) if $::expert && ref($hd) =~ /_([^_]+)$/;
- $info .= _("on channel %d id %d\n", $hd->{channel}, $hd->{id}) if $::expert && exists $hd->{channel};
- $info;
-}
-
-sub format_raw_hd_info {
- my ($raw_hd) = @_;
-
- my $info = '';
- $info .= _("Mount point: ") . "$raw_hd->{mntpoint}\n" if $raw_hd->{mntpoint};
- $info .= format_hd_info($raw_hd);
- if ($raw_hd->{type}) {
- my $type = substr(type2name($raw_hd->{type}), 0, 40); # limit the length
- $info .= _("Type: ") . $type . "\n";
- }
- $info .= _("Options: %s", $raw_hd->{options}) if $raw_hd->{options};
- $info;
-}
-
-#- get the minimal size of partition in sectors to help diskdrake on
-#- limit cases, include a cylinder + start of a eventually following
-#- logical partition.
-sub min_partition_size { $_[0]->cylinder_size() + 2*$_[0]->{geom}{sectors} }
-
-
-sub choose_encrypt_key {
- my ($in) = @_;
-
- my ($encrypt_key, $encrypt_key2);
- $in->ask_from_(
- {
- title => _("Filesystem encryption key"),
- messages => _("Choose your filesystem encryption key"),
- callbacks => {
- complete => sub {
- length $encrypt_key < 20 and $in->ask_warn('', _("This encryption key is too simple (must be at least %d characters long)", 20)), return (1,0);
- $encrypt_key eq $encrypt_key2 or $in->ask_warn('', [ _("The encryption keys do not match"), _("Please try again") ]), return (1,1);
- return 0
- } } }, [
-{ label => _("Encryption key"), val => \$encrypt_key, hidden => 1 },
-{ label => _("Encryption key (again)"), val => \$encrypt_key2, hidden => 1 },
- ]) && $encrypt_key;
-}
diff --git a/perl-install/diskdrake/removable.pm b/perl-install/diskdrake/removable.pm
deleted file mode 100644
index 58eb2b302..000000000
--- a/perl-install/diskdrake/removable.pm
+++ /dev/null
@@ -1,53 +0,0 @@
-package diskdrake::removable; # $Id$
-
-use diagnostics;
-use strict;
-use diskdrake::interactive;
-use common;
-use fsedit;
-use fs;
-
-sub main {
- my ($in, $all_hds, $raw_hd) = @_;
- my %actions = my @actions = actions();
- my $action;
- while ($action ne 'Done') {
- $action = $in->ask_from_list_('',
- diskdrake::interactive::format_raw_hd_info($raw_hd),
- [ map { $_->[0] } group_by2 @actions ], 'Done') or return;
- $actions{$action}->($in, $raw_hd, $all_hds);
- }
-}
-
-sub actions {
- (
- __("Mount point") => \&mount_point,
- __("Options") => \&options,
- __("Type") => \&type,
- __("Done") => \&done,
- );
-}
-
-sub done {
- my ($in, $raw_hd, $all_hds) = @_;
- diskdrake::interactive::Done($in, $all_hds);
-}
-sub options {
- my ($in, $raw_hd, $all_hds) = @_;
- diskdrake::interactive::Options($in, {}, $raw_hd, $all_hds);
-}
-sub mount_point {
- my ($in, $raw_hd, $all_hds) = @_;
- diskdrake::interactive::Mount_point_raw_hd($in, $raw_hd, $all_hds, [ "/mnt/$raw_hd->{device}" ] );
-}
-sub type {
- my ($in, $raw_hd) = @_;
- my @fs = ('auto', fs::auto_fs());
- my $type = $raw_hd->{type};
- $in->ask_from(_("Change type"),
- _("Which filesystem do you want?"),
- [ { label => _("Type"), val => \$type, list => [@fs], not_edit => !$::expert } ]) or return;
- $raw_hd->{type} = $type;
-}
-
-1;
diff --git a/perl-install/diskdrake/removable_gtk.pm b/perl-install/diskdrake/removable_gtk.pm
deleted file mode 100644
index da897b67a..000000000
--- a/perl-install/diskdrake/removable_gtk.pm
+++ /dev/null
@@ -1,31 +0,0 @@
-package diskdrake::removable_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use my_gtk qw(:helpers :wrappers :ask);
-
-
-sub per_entry_action_box {
- my ($box, $kind, $entry) = @_;
- $_->widget->destroy foreach $box->children;
-
- if ($entry) {
- my @l = (
- _("Mount point") => \&raw_hd_mount_point,
- _("Options") => \&raw_hd_options,
- _("Type") => \&removable_type,
- );
- @buttons = map_each {
- my ($txt, $f) = @_;
- gtksignal_connect(new Gtk::Button($txt), clicked => sub { try_('', $f, $entry) });
- } group_by2 @l;
-
- gtkadd($box, gtkadd(new Gtk::Frame(_("Choose action")),
- createScrolledWindow(gtkpack__(new Gtk::VBox(0,0), @buttons)))) if @buttons;
-
- } else {
- my $txt = _("Please click on a medium");
- gtkpack($box, gtktext_insert(new Gtk::Text, $txt));
- }
-}
diff --git a/perl-install/diskdrake/smbnfs_gtk.pm b/perl-install/diskdrake/smbnfs_gtk.pm
deleted file mode 100644
index 545d925fd..000000000
--- a/perl-install/diskdrake/smbnfs_gtk.pm
+++ /dev/null
@@ -1,266 +0,0 @@
-package diskdrake::smbnfs_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use any;
-use fs;
-use diskdrake::interactive;
-use common;
-use interactive;
-use network::smb;
-use network::nfs;
-use my_gtk qw(:helpers :wrappers :ask);
-
-my ($all_hds, $in, $tree, $current_entry, $current_leaf, %icons);
-
-sub main {
- ($in, $all_hds, my $type) = @_;
- my ($kind) = $type eq 'smb' ? smb2kind() : nfs2kind();
- {
- local $my_gtk::pop_it = 1;
- $kind->check($in) or return;
- }
-
- my $w = my_gtk->new('DiskDrake');
-
- add_smbnfs($w->{window}, $kind);
- $w->{rwindow}->set_default_size(400, 300) if $w->{rwindow}->can('set_default_size');
- $w->{window}->show_all;
- $w->main;
-}
-
-################################################################################
-# nfs/smb: helpers
-################################################################################
-sub try {
- my ($kind, $name, @args) = @_;
- my $f = $diskdrake::interactive::{$name} or die "unknown function $name";
- try_($kind, $name, \&{$f}, @args);
-}
-sub try_ {
- my ($kind, $name, $f, @args) = @_;
- eval { $f->($in, @args, $all_hds); };
- if (my $err = $@) {
- $in->ask_warn(_("Error"), formatError($err));
- }
- update($kind);
- Gtk->main_quit if member($name, 'Cancel', 'Done');
-}
-
-sub raw_hd_options {
- my ($in, $raw_hd) = @_;
- diskdrake::interactive::Options($in, {}, $raw_hd);
-}
-sub raw_hd_mount_point {
- my ($in, $raw_hd) = @_;
- my ($default) = $raw_hd->{device} =~ m|([^/]+)$|;
- $default =~ s/\s+/-/g;
- diskdrake::interactive::Mount_point_raw_hd($in, $raw_hd, $all_hds, [ "/mnt/$default" ]);
-}
-
-sub per_entry_info_box {
- my ($box, $kind, $entry) = @_;
- $_->isa('Gtk::Button') or $_->destroy foreach map { $_->widget } $box->children;
- my $info;
- if ($entry) {
- $info = diskdrake::interactive::format_raw_hd_info($entry);
- }
- gtkpack($box, gtkadd(new Gtk::Frame(_("Details")), gtkset_justify(new Gtk::Label($info), 'left')));
-}
-
-sub per_entry_action_box {
- my ($box, $kind, $entry) = @_;
- $_->widget->destroy foreach $box->children;
-
- my @buttons;
-
- push @buttons, map {
- my $s = $_;
- gtksignal_connect(new Gtk::Button(translate($s)), clicked => sub { try($kind, $s, {}, $entry) });
- } (if_($entry->{isMounted}, __("Unmount")),
- if_($entry->{mntpoint} && !$entry->{isMounted}, __("Mount"))) if $entry;
-
- my @l = (
- if_($entry, __("Mount point") => \&raw_hd_mount_point),
- if_($entry && $entry->{mntpoint}, __("Options") => \&raw_hd_options),
- __("Cancel") => sub {},
- __("Done") => \&done,
- );
- push @buttons, map {
- my ($txt, $f) = @$_;
- gtksignal_connect(new Gtk::Button(translate($txt)), clicked => sub { try_($kind, $txt, $f, $entry) });
- } group_by2(@l);
-
- gtkadd($box, gtkpack(new Gtk::HBox(0,0), @buttons));
-}
-
-sub done {
- my ($in) = @_;
- diskdrake::interactive::Done($in, $all_hds);
-}
-
-sub set_export_icon {
- my ($entry, $w) = @_;
- $entry ||= {};
- my $icon = $icons{$entry->{isMounted} ? 'mounted' : $entry->{mntpoint} ? 'has_mntpoint' : 'default'};
- my_gtk::ctree_set_icon($tree, $w, @$icon);
-}
-
-sub update {
- my ($kind) = @_;
- per_entry_action_box($kind->{action_box}, $kind, $current_entry);
- per_entry_info_box($kind->{info_box}, $kind, $current_entry);
- set_export_icon($current_entry, $current_leaf) if $current_entry;
-}
-
-sub find_fstab_entry {
- my ($kind, $e, $add_or_not) = @_;
-
- my $fs_entry = $kind->to_fstab_entry($e);
-
- if (my ($fs_entry_) = grep { $fs_entry->{device} eq $_->{device} } @{$kind->{val}}) {
- $fs_entry_;
- } elsif ($add_or_not) {
- push @{$kind->{val}}, $fs_entry;
- $fs_entry;
- } else {
- undef;
- }
-}
-
-sub import_ctree {
- my ($kind, $info_box) = @_;
- my (%servers_displayed, %wservers, %wexports, $inside);
-
- $tree = Gtk::CTree->new(1, 0);
- $tree->set_column_auto_resize(0, 1);
- $tree->set_selection_mode('browse');
- $tree->set_row_height($tree->style->font->ascent + $tree->style->font->descent + 1);
-
- foreach ('default', 'server', 'has_mntpoint', 'mounted') {
- $icons{$_} = [ gtkcreate_png("smbnfs_$_") ];
- }
-
- my $add_server = sub {
- my ($server) = @_;
- my $name = $server->{name} || $server->{ip};
- $servers_displayed{$name} ||= do {
- my $w = $tree->insert_node(undef, undef, [$name], 5, (undef) x 4, 0, 0);
- my_gtk::ctree_set_icon($tree, $w, @{$icons{server}});
- $wservers{$w->{_gtk}} = $server;
- $w;
- };
- };
-
- my $find_exports; $find_exports = sub {
- my ($server) = @_;
- my @l = eval { $kind->find_exports($server) };
- return @l if !$@;
-
- if ($server->{username}) {
- $in->ask_warn('', _("Can't login using username %s (bad password?)", $server->{username}));
- network::smb::remove_bad_credentials($server);
- } else {
- if (my @l = network::smb::authentifications_available($server)) {
- my $user = $in->ask_from_list_(_("Domain Authentication Required"),
- _("Which username"), [ @l, __("Another one") ]) or return;
- if ($user ne 'Another one') {
- network::smb::read_credentials($server, $user);
- goto $find_exports;
- }
- }
- }
-
- if ($in->ask_from(_("Domain Authentication Required"),
- _("Please enter your username, password and domain name to access this host."),
- [
- { label => _("Username"), val => \$server->{username} },
- { label => _("Password"), val => \$server->{password} },
- { label => _("Domain"), val => \$server->{domain} },
- ])) {
- goto $find_exports;
- } else {
- delete $server->{username};
- ();
- }
- };
-
- my $add_exports = sub {
- my ($node) = @_;
- $tree->expand($node);
- foreach ($find_exports->($wservers{$node->{_gtk}} || return)) { #- can't die here since insert_node provoque a tree_select_row before the %wservers is filled
- my $w = $tree->insert_node($node, undef, [$kind->to_string($_)], 5, (undef) x 4, 1, 0);
- set_export_icon(find_fstab_entry($kind, $_), $w);
- $wexports{$w->{_gtk}} = $_;
- }
- };
-
- {
- my $search = new Gtk::Button(_("Search servers"));
- gtkpack__($info_box,
- gtksignal_connect($search,
- clicked => sub {
- $add_server->($_) foreach sort { $a->{name} cmp $b->{name} } $kind->find_servers;
- $search->destroy;
- }));
- }
-
- foreach (uniq(map { ($kind->from_dev($_->{device}))[0] } @{$kind->{val}})) {
- my $node = $add_server->({ name => $_ });
- $add_exports->($node);
- }
-
- $tree->signal_connect(tree_select_row => sub {
- my $curr = $_[1];
- $inside and return;
- $inside = 1;
- if ($curr->row->is_leaf) {
- $current_leaf = $curr;
- $current_entry = find_fstab_entry($kind, $wexports{$curr->{_gtk}} || die(''), 'add');
- } else {
- if (!$curr->row->children) {
- gtkset_mousecursor_wait($tree->window);
- my_gtk::flush();
- $add_exports->($curr);
- gtkset_mousecursor_normal($tree->window);
- }
- $current_entry = undef;
- }
- update($kind);
- $inside = 0;
- });
- $tree;
-}
-
-sub add_smbnfs {
- my ($widget, $kind) = @_;
- die if $kind->{main_box};
-
- $kind->{info_box} = new Gtk::VBox(0,0);
- $kind->{display_box} = createScrolledWindow(import_ctree($kind, $kind->{info_box}));
- $kind->{action_box} = new Gtk::HBox(0,0);
- $kind->{main_box} =
- gtkpack_(new Gtk::VBox(0,7),
- 1, gtkpack(new Gtk::HBox(0,7),
- gtkset_usize($kind->{display_box}, 200, 0),
- $kind->{info_box}),
- 0, $kind->{action_box},
- );
-
- $widget->add($kind->{main_box});
- $current_entry = undef;
- update($kind);
- $kind;
-}
-
-sub nfs2kind {
- network::nfs->new({ type => 'nfs', name => 'NFS', val => $all_hds->{nfss}, no_auto => 1 });
-}
-
-sub smb2kind {
- network::smb->new({ type => 'smb', name => 'Samba', val => $all_hds->{smbs}, no_auto => 1 });
-}
-
-
-1;
diff --git a/perl-install/drakxtools.spec b/perl-install/drakxtools.spec
deleted file mode 100644
index 31e034354..000000000
--- a/perl-install/drakxtools.spec
+++ /dev/null
@@ -1,1216 +0,0 @@
-Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...)
-Name: drakxtools
-Version: 1.1.8
-Release: 5mdk
-Url: http://www.linux-mandrake.com/en/drakx.php3
-Source0: %name-%version.tar.bz2
-License: GPL
-Group: System/Configuration/Other
-Requires: %{name}-newt = %version-%release, perl-GTK >= 0.6123, perl-GTK-GdkImlib, XFree86-100dpi-fonts, XFree86-75dpi-fonts, /usr/X11R6/bin/xtest, detect-lst >= 0.9.72, font-tools, usermode >= 1.44-4mdk, perl-MDK-Common >= 1.0.3-3mdk, groff
-Conflicts: drakconf < 0.96-10mdk
-BuildRequires: e2fsprogs-devel
-BuildRequires: gcc
-BuildRequires: gettext
-BuildRequires: gtk+-devel
-BuildRequires: ldetect-devel
-BuildRequires: ncurses-devel
-BuildRequires: newt-devel
-BuildRequires: perl-devel
-BuildRoot: %_tmppath/%name-buildroot
-
-%package newt
-Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...)
-Group: System/Configuration/Other
-Requires: perl-base >= 1:5.8.0, urpmi, modutils >= 2.3.11, ldetect-lst >= 0.1.2-32mdk, usermode-consoleonly >= 1.44-4mdk
-Obsoletes: diskdrake setuptool
-Obsoletes: Xconfigurator mouseconfig kbdconfig printtool
-Provides: diskdrake setuptool Xconfigurator mouseconfig kbdconfig printtool
-
-%package http
-Summary: The drakxtools via http
-Group: System/Configuration/Other
-Requires: %{name}-newt = %version-%release, perl-Net_SSLeay, perl-Authen-PAM, perl-CGI
-
-%package -n harddrake
-Summary: Main Hardware Configuration/Information Tool
-Group: System/Configuration/Hardware
-Requires: %{name}-newt = %version-%release
-Obsoletes: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-Provides: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-
-%package -n harddrake-ui
-Summary: Main Hardware Configuration/Information Tool
-Group: System/Configuration/Hardware
-Requires: %name = %version-%release
-Obsoletes: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-Provides: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-
-%description
-Contains adduserdrake, ddcxinfos, diskdrake, drakautoinst, drakbackup,
-drakboot, drakbug, drakbug_report, drakfloppy, drakfont, drakgw,
-draknet, drakproxy, draksec, drakTermServ, drakxconf, drakxservices,
-drakxtv, lsnetdrake, lspcidrake, keyboarddrake, livedrake,
-localedrake, mousedrake, printerdrake, scannerdrake, tinyfirewall and
-XFdrake :
-
-adduserdrake: help you adding a user
-
-ddcxinfos: get infos from the graphic card and print XF86Config
-modlines
-
-diskdrake: DiskDrake makes hard disk partitioning easier. It is
-graphical, simple and powerful. Different skill levels are available
-(newbie, advanced user, expert). It's written entirely in Perl and
-Perl/Gtk. It uses resize_fat which is a perl rewrite of the work of
-Andrew Clausen (libresize).
-
-drakautoinst: help you configure an automatic installation replay
-
-drakbackup: backup and restore your system.
-
-drakboot: configures your boot configuration (Lilo/GRUB, Aurora, X, autologin)
-
-drakbug: interactive bug report tool
-
-drakbug_report: help find bugs in DrakX
-
-drakfloppy: boot disk creator
-
-drakfont: import some fonts in the system.
-
-drakgw: internet connection sharing
-
-draknet: LAN/Internet connection configuration. It handles ethernet,
-ISDN, DSL, cable, modem.
-
-drakproxy: proxies configuration
-
-draksec: security configurator (security levels, ...)
-
-drakTermServ: mandrake terminal server configurator
-
-drakxconf: simple control center
-
-drakxservices: SysV service and dameaons configurator
-
-drakxtv: auto configure tv card for xawtv grabber
-
-keyboarddrake: configures your keyboard (both console and X)
-
-liveupdate: live update software.
-
-lspcidrake: displays your pci information, *and* the corresponding
-kernel module.
-
-localedrake: locale configurator (language, ...)
-
-mousedrake: configures and autodetects your mouse
-
-printerdrake: detects and configures your printer
-
-scannerdrake: scanner configurator
-
-tinyfirewall: simple firewall configurator
-
-XFdrake: menu-driven program which walks you through setting up your X
-server. It works on console and under X :)
-It autodetects both monitor and video card if possible.
-
-
-%description newt
-This add the capability to be runned behind a web server to the drakx tools.
-See package %name
-
-%description http
-See package %name
-
-%description -n harddrake
-The harddrake service is a hardware probing tool run at system boot
-time to determine what hardware has been added or removed from the
-system.
-It then offer to run needed config tool to update the OS
-configuration.
-
-
-%description -n harddrake-ui
-This is the main configuration tool for hardware that calls all the
-other configuration tools.
-It offers a nice GUI that show the hardware configuration splitted by
-hardware classes.
-
-
-%prep
-%setup -q
-
-%build
-%make rpcinfo-flushed ddcprobe serial_probe
-%make
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-%make PREFIX=$RPM_BUILD_ROOT install
-mkdir -p $RPM_BUILD_ROOT/{%_initrddir,etc/sysconfig/harddrake2}
-touch $RPM_BUILD_ROOT/etc/sysconfig/harddrake2/previous_hw
-
-mv $RPM_BUILD_ROOT%_sbindir/net_monitor \
- $RPM_BUILD_ROOT%_sbindir/net_monitor.real
-ln -sf %_bindir/consolehelper $RPM_BUILD_ROOT%_sbindir/net_monitor
-mkdir -p $RPM_BUILD_ROOT%_sysconfdir/{pam.d,security/console.apps}
-cp pam.net_monitor $RPM_BUILD_ROOT%_sysconfdir/pam.d/net_monitor
-cp apps.net_monitor $RPM_BUILD_ROOT%_sysconfdir/security/console.apps/net_monitor
-
-dirs1="usr/lib/libDrakX usr/share/libDrakX"
-(cd $RPM_BUILD_ROOT ; find $dirs1 usr/bin usr/sbin ! -type d -printf "/%%p\n")|egrep -v 'bin/.*harddrake' > %{name}.list
-(cd $RPM_BUILD_ROOT ; find $dirs1 -type d -printf "%%%%dir /%%p\n") >> %{name}.list
-
-perl -ni -e '/gtk|icons|pixmaps|XFdrake|bootlook|drakbackup|drakfont|logdrake|net_monitor/ ? print STDERR $_ : print' %{name}.list 2> %{name}-gtk.list
-perl -ni -e '/http/ ? print STDERR $_ : print' %{name}.list 2> %{name}-http.list
-
-#mdk menu entry
-mkdir -p $RPM_BUILD_ROOT/%_menudir
-cat > $RPM_BUILD_ROOT%_menudir/harddrake-ui <<EOF
-?package(harddrake-ui):\
- needs="X11"\
- section="Configuration/Hardware"\
- title="HardDrake"\
- longtitle="Hardware Central Configuration/information tool"\
- command="/usr/sbin/harddrake2"\
- icon="harddrake.png"
-EOF
-%find_lang libDrakX
-cat libDrakX.lang >> %name.list
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-[[ ! -e /usr/X11R6/bin/Xconfigurator ]] && %__ln_s -f ../sbin/XFdrake /usr/X11R6/bin/Xconfigurator
-[[ ! -e %_sbindir/kbdconfig ]] && %__ln_s -f keyboarddrake %_sbindir/kbdconfig
-[[ ! -e %_sbindir/setuptool ]] && %__ln_s -f drakxconf %_sbindir/setuptool
-[[ ! -e %_sbindir/mouseconfig ]] && %__ln_s -f mousedrake %_sbindir/mouseconfig
-[[ ! -e %_bindir/printtool ]] && %__ln_s -f ../sbin/printerdrake %_bindir/printtool
-:
-
-%postun
-for i in /usr/X11R6/bin/Xconfigurator %_sbindir/kbdconfig %_sbindir/mouseconfig %_bindir/printtool;do
- [[ -L $i ]] && %__rm -f $i
-done
-
-%post http
-%_post_service drakxtools_http
-
-%preun http
-%_preun_service drakxtools_http
-
-%post -n harddrake
-%_initrddir/harddrake start
-
-%post -n harddrake-ui
-%update_menus
-
-%postun -n harddrake-ui
-%clean_menus
-
-
-%files newt -f %name.list
-%defattr(-,root,root)
-%config(noreplace) /etc/security/fileshare.conf
-%doc diskdrake/diskdrake.html
-%attr(4755,root,root) %_sbindir/fileshareset
-
-%files -f %{name}-gtk.list
-%defattr(-,root,root)
-%config(noreplace) %_sysconfdir/pam.d/net_monitor
-%config(noreplace) %_sysconfdir/security/console.apps/net_monitor
-/usr/X11R6/bin/*
-
-%files -n harddrake
-%defattr(-,root,root)
-%config(noreplace) %_initrddir/harddrake
-%dir /etc/sysconfig/harddrake2/
-%config(noreplace) /etc/sysconfig/harddrake2/previous_hw
-%_datadir/harddrake/service_harddrake
-
-%files -n harddrake-ui
-%defattr(-,root,root)
-%_sbindir/harddrake2
-%_datadir/pixmaps/harddrake2
-%_menudir/harddrake-ui
-
-%files http -f %{name}-http.list
-%defattr(-,root,root)
-%dir %_sysconfdir/drakxtools_http
-%config(noreplace) %_sysconfdir/pam.d/miniserv
-%config(noreplace) %_sysconfdir/init.d/drakxtools_http
-%config(noreplace) %_sysconfdir/drakxtools_http/conf
-%config(noreplace) %_sysconfdir/drakxtools_http/authorised_progs
-%config(noreplace) %_sysconfdir/logrotate.d/drakxtools-http
-
-%changelog
-* Wed Jul 10 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-5mdk
-- list and describe all gui tools from drakxtools
-- code enhancement: increase coherency around the whole drakx code
-- decrease the debug verbosity
-
-* Wed Jul 10 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-4mdk
-- fix depandancy
-
-* Tue Jul 09 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-3mdk
-- harddrake2:
- o no need to 'use strict' in "binary" => remove warnings
- o fix boot freeze on hw change: initscript was running us with
- stdout redirected to /dev/null; just use a small sh wrapper to
- fix it
- o harddrake::bttv: only log in standalone mode
- o display channel of eide devices
-
-- spec:
- o reorder entries in description
- o list all entries in first line of description
- o fix post: add start argument
-
-* Mon Jul 08 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-2mdk
-- spec :
- o enhance descriptions
- o various spec clean
- o harddrake :
- * obsoletes/provides libdetect-lst, libdetect-lst-devel, detect,
- detect-lst, kudzu-devel
- * split package between harddrake and harddrake-ui to minimize
- the harddrake service dependancies
- * add missing /etc/sysconfig/harddrake2
-- harddrake2 :
- o cache detect_devices::probeall(1) so that hw probe is run once
- o hw configuration :
- * eide devices: split up info field into vendor and model fields
- o ui:
- * enhanced help
- * mice:
- - s/nbuttons/Number of buttons/
- - delete qw(MOUSETYPE XMOUSETYPE unsafe)
- * complete help
- * center the main window
- * remove drakx decorations
- * don't display "run config tool" button if no configurator
- availlable
- o logic:
- * skip configuration on firt run
- * don't restart harddrake on install
- * skip hw classes without configurator (which'll have a
- configurator after porting updfstab)
- o service :
- * only do the job at startup
- * add "please wait" message
- * really don't cry when no previous config
-
-* Mon Jul 08 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-1mdk
-- snapshot
-- new entries:
- o harddrake2 : new hardware detection && configuration tool
- o drakbugreport: bug reporting tool a la Kde (not working!)
- o drakTermServ : configuration tool for diskless stations.
-- updated programs :
- o drakxtv: if runned by root, offer to configure bttv for most tv cards
- o disdrake:
- * enhanced raid & lvm support,
- * check if programs (ie jfsprogs) are installed
- * cleanups
- o Xconfigurator: bug fix
-- general : better supermout support, use new libldetect, various bug fixes
-
-* Tue Jun 18 2002 Frederic Lepied <flepied@mandrakesoft.com> 1.1.7-99mdk
-- added new draksec from Christian and a new way to build the packages (make rpm)
-
-* Mon Apr 15 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.7-98mdk
-- snapshot
-- add drakxtv description
-- drakxtv : now auto guess the country and the freq table
-
-* Fri Mar 15 2002 dam's <damien@mandrakesoft.com> 1.1.7-97mdk
-- snapshot. final release 1
-
-* Tue Mar 12 2002 dam's <damien@mandrakesoft.com> 1.1.7-96mdk
-- added onboot options foreach network cards
-- resolv.conf and domain name bug fixed
-
-* Tue Mar 12 2002 dam's <damien@mandrakesoft.com> 1.1.7-95mdk
-- included drakproxy
-- corrected various timeout (net_monitor, internet connection tests)
-- snapshot
-
-* Mon Mar 11 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-94mdk
-- various
-
-* Fri Mar 8 2002 dam's <damien@mandrakesoft.com> 1.1.7-93mdk
-- drakfont GUI corrected
-- new drakproxy
-
-* Fri Mar 08 2002 François Pons <fpons@mandrakesoft.com> 1.1.7-92mdk
-- fixes for NVIDIA drivers support in XFdrake.
-
-* Thu Mar 7 2002 dam's <damien@mandrakesoft.com> 1.1.7-91mdk
-- lot of bugfixes
-- (dams)
- * standalone/net_monitor: make gc happy
- * modparm.pm, share/po/fr.po: corrected
- * standalone/draknet: corrected network/internet restart when already
- connected
- * standalone/drakfont: corrected bad system command
- * standalone/drakautoinst: corrected HASH and ARRAY label
-- (gc)
- * standalone/drakgw:
- - call net_monitor to disable internet connection before
- network-restart
- - user return value when status'ing the
- initscripts rather than grepping their text output
-- (pixel)
- * standalone/fileshareset (nfs_exports::update_server): ensure portmap
- is running
-
-* Wed Mar 6 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-90mdk
-- corrected font in wizard (dams)
-- localedrake: (pixel)
- * fix dummy entries in .i18n for chineese
- * take sysconfig/i18n into account when no .i18n
- * when called by kcontrol with --apply, don't modify kde config files,
- kcontrol takes care of it more nicely
-- diskdrake: translate actions in text mode (pixel)
-- drakxtv fixed (titi)
-
-* Sun Mar 3 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-89mdk
-- (gtkicons_labels_widget): pass the widget instead of directly passing the font
- (for drakconf)
-
-* Sun Mar 3 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-88mdk
-- (gtkicons_labels_widget): pass the style instead of directly passing the font
- (for drakconf)
-
-* Fri Mar 1 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-87mdk
-- new snapshot (including a modified localedrake)
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-86mdk
-- corrected modinfo path. isa modules options should now work.
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-85mdk
-- corrected spec so that net_monitor.real get included too.
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-84mdk
-- snapshot
-
-* Wed Feb 27 2002 dam's <damien@mandrakesoft.com> 1.1.7-83mdk
-- snapshot
-
-* Tue Feb 26 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-82mdk
-- move XFdrake to drakxtools from drakxtools-newt
-(otherwise it doesn't work, since it needs perl-GTK & xtest)
-
-* Tue Feb 26 2002 dam's <damien@mandrakesoft.com> 1.1.7-81mdk
-- added groff require
-
-* Tue Feb 26 2002 dam's <damien@mandrakesoft.com> 1.1.7-80mdk
-- isa card modules correction. Should work in post install
-- drakfont correction
-
-* Sat Feb 23 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-79mdk
-- require latest perl-MDK-Common
-- corrected icon paths (thanks to garrick)
-- don't create devices when /dev is devfs mounted (thanks to Andrej Borsenkow)
-
-* Fri Feb 22 2002 dam's <damien@mandrakesoft.com> 1.1.7-78mdk
-- corrected icon paths
-
-* Thu Feb 21 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-77mdk
-- now we can live without kdesu ; and drakxtools-newt only requires
- usermode-consoleonly
-
-* Tue Feb 19 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-76mdk
-- fix diskdrake --nfs & --smb
-
-* Tue Feb 19 2002 dam's <damien@mandrakesoft.com> 1.1.7-75mdk
-- required specific version of perl MDK Common
-
-* Tue Feb 19 2002 dam's <damien@mandrakesoft.com> 1.1.7-74mdk
-- various things not described by the last packager
-- new png/wpm search policy in my_gtk
-
-* Mon Feb 18 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-73mdk
-- snapshot
-
-* Sat Feb 16 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-72mdk
-- localedrake now handles KDE
-- diskdrake now handles XFS on LVM live resizing (growing only)
-
-* Fri Feb 15 2002 dam's <damien@mandrakesoft.com> 1.1.7-71mdk
-- snapshot
-
-* Thu Feb 14 2002 dam's <damien@mandrakesoft.com> 1.1.7-70mdk
-- snapshot
-
-* Mon Feb 11 2002 dam's <damien@mandrakesoft.com> 1.1.7-69mdk
-- fixed bad stuff.so in drakxtools
-
-* Fri Feb 8 2002 dam's <damien@mandrakesoft.com> 1.1.7-68mdk
-- new gfx
-- various fix
-- major printerdrake updates
-
-* Thu Feb 07 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.7-67mdk
-- add drakxtv
-
-* Thu Feb 7 2002 dam's <damien@mandrakesoft.com> 1.1.7-66mdk
-- new package, various wizard, mygtk, disdrake improvment.
-
-* Wed Feb 6 2002 dam's <damien@mandrakesoft.com> 1.1.7-65mdk
-- logdrake updates
-- wizard fix
-
-* Tue Jan 29 2002 dam's <damien@mandrakesoft.com> 1.1.7-64mdk
-- last mygtk, drakbackup...
-- disdrake fixed
-- snapshot
-
-* Sun Jan 27 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-63mdk
-- cleanup drakxtools-newt (move all gtk stuff to drakxtools)
-- reworked and split diskdrake
-- add logdrake
-
-* Fri Jan 25 2002 dam's <damien@mandrakesoft.com> 1.1.7-62mdk
-- bug corrections, improvements
-- new advertising engine
-- new gtkicons_labels_widget
-
-* Tue Jan 22 2002 dam's <damien@mandrakesoft.com> 1.1.7-61mdk
-- new gtkicons_labels_widget for new mcc.
-
-* Fri Jan 18 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-60mdk
-- first support for 'Explanations'
-
-* Fri Jan 18 2002 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-59mdk
-- Drakbackup without unstable options for qa.
-- DrakFont update warning message (qa).
-
-* Wed Jan 16 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-58mdk
-- ensure lsnetdrake is included
-
-* Tue Jan 15 2002 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-57mdk
-- Drakbackup daemon, backend mode (-show-conf -daemon -debug -help -version) and report mail corrections.
-- DrakFont gi and progress bar problems.
-
-* Tue Jan 14 2002 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-56mdk
-- New drakbackup version, ftp backup work, new pixmaps.
-- DrakFont with new pixmaps.
-
-* Mon Jan 14 2002 Stefan van der Eijk <stefan@eijk.nu> 1.1.7-55mdk
-- BuildRequires
-
-* Fri Jan 11 2002 dam's <damien@mandrakesoft.com> 1.1.7-54mdk
-- snapshot
-
-* Wed Jan 9 2002 dam's <damien@mandrakesoft.com> 1.1.7-53mdk
-- snapshot
-- new code in my_gtk
-
-* Tue Jan 8 2002 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-52mdk
-- New drakbackup version, incremental backup and restore should work.
-
-* Sat Dec 22 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-51mdk
-- fix conflicts in drakbackup cvs version.
-
-* Sat Dec 22 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-50mdk
-- new drakbackup version.
-
-* Mon Dec 10 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-49mdk
-- fix drakfont path problem.
-- new version of drakbakup
-
-* Wed Dec 5 2001 dam's <damien@mandrakesoft.com> 1.1.7-48mdk
-- corrected syntax error
-
-* Tue Dec 4 2001 dam's <damien@mandrakesoft.com> 1.1.7-47mdk
-- avoid network test freeze
-- added drackbackup
-- snapshot
-
-* Fri Nov 30 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-46mdk
-- add diskdrake --fileshare
-
-* Thu Nov 29 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-45mdk
-- new diskdrake including fileshareset/filesharelist stuff
-
-* Mon Nov 26 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-44mdk
-- use the CVS, not my devel (instable) version
-
-* Fri Nov 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-43mdk
-- any.pm fixed
-
-* Mon Nov 19 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-42mdk
-- scannerdrake update to add dynamic support
-
-* Mon Nov 12 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-41mdk
-- scannerdrake update with new fat ScannerDB
-
-* Mon Nov 5 2001 dam's <damien@mandrakesoft.com> 1.1.7-40mdk
-- corrected typo in drakautoinst
-
-* Fri Nov 2 2001 dam's <damien@mandrakesoft.com> 1.1.7-39mdk
-- release
-
-* Fri Oct 26 2001 dam's <damien@mandrakesoft.com> 1.1.7-38mdk
-- drakautoinst & drakfont updated
-
-* Thu Oct 25 2001 dam's <damien@mandrakesoft.com> 1.1.7-37mdk
-- big improvement on drakautoinst
-- draknet : connection script updated
-
-* Thu Oct 18 2001 dam's <damien@mandrakesoft.com> 1.1.7-36mdk
-- draknet/net_monitor corrected
-- corrected bad stuff.so
-
-* Tue Oct 16 2001 dam's <damien@mandrakesoft.com> 1.1.7-35mdk
-- make rplint happier
-
-* Wed Oct 10 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-34mdk
-- snapshot with scanner stuff
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-33mdk
-- snapshot
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-32mdk
-- Last translations.
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-31mdk
-- snapshot. draknet bugfix.
-
-* Sun Sep 23 2001 dam's <damien@mandrakesoft.com> 1.1.7-30mdk
-- snapshot. Included last printer and draknet corrections.
-
-* Fri Sep 21 2001 dam's <damien@mandrakesoft.com> 1.1.7-29mdk
-- typo in adsl.pm, Xconfigurator fix.
-
-* Thu Sep 20 2001 dam's <damien@mandrakesoft.com> 1.1.7-28mdk
-- snapshot. draknet works now.
-
-* Wed Sep 19 2001 dam's <damien@mandrakesoft.com> 1.1.7-27mdk
-- snapshot
-
-* Mon Sep 17 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-26mdk
-- snapshot
-
-* Mon Sep 17 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-25mdk
-- snapshot
-
-* Sat Sep 15 2001 dam's <damien@mandrakesoft.com> 1.1.7-24mdk
-- snapshot with printer, draknet & install fixes
-
-* Fri Sep 14 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-23mdk
-- snapshot with latest XFdrake fixes.
-
-* Fri Sep 14 2001 dam's <damien@mandrakesoft.com> 1.1.7-22mdk
-- snapshot
-
-* Thu Sep 13 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-21mdk
-- fix Xinerama for Matrox cards (restore XFree86 4.1.0 without DRI).
-- removed Modeline 1024x768 in 97.6 Hz which troubles XF4 a lot.
-
-* Thu Sep 13 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-20mdk
-- snapshot with XFdrake fixes (G550 support, no DRI with Xinerama,
- no XFree86 3.3.6 proposed wiht dual head).
-
-* Wed Sep 12 2001 dam's <damien@mandrakesoft.com> 1.1.7-19mdk
-- snapshot
-
-* Wed Sep 12 2001 dam's <damien@mandrakesoft.com> 1.1.7-18mdk
-- snapshot.
-
-* Mon Sep 10 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-17mdk
-- remove dependency on "perl" since pixel added Data::Dumper in perl-base
-
-* Mon Sep 10 2001 dam's <damien@mandrakesoft.com> 1.1.7-16mdk
-- new snapshot, bug corrections.
-
-* Thu Sep 6 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-15mdk
-- drakgw should be working now
-
-* Tue Sep 04 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-14mdk
-- snaphsot, better interaction with mcc (diskdrake printerdrake).
-
-* Tue Sep 4 2001 dam's <damien@mandrakesoft.com> 1.1.7-13mdk
-- snapshot.
-
-* Thu Aug 30 2001 dam's <damien@mandrakesoft.com> 1.1.7-12mdk
-- snapshot. locales corected, nicer wizards.
-
-* Thu Aug 30 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-11mdk
-- new snapshot, mousedrake fixes again.
-
-* Wed Aug 29 2001 François Pons <fpons@mandrakesoft.com> 1.1.7-10mdk
-- new snapshot, mousedrake fixes.
-
-* Fri Aug 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-9mdk
-- snapshot for 8.1 beta2.
-
-* Fri Aug 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-8mdk
-- bugfix.
-- new snapshot. mousedrake experimental.
-
-* Thu Aug 23 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-7mdk
-- fix drakboot bug
-- macros to fix some rpmlint warnings
-
-* Wed Aug 22 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-6mdk
-- put a require on "perl" which is needed for Data::Dumper in drakautoinst
-
-* Wed Aug 22 2001 dam's <damien@mandrakesoft.com> 1.1.7-5mdk
-- snapshot. draknet improvments, bug fixes.
-
-* Mon Aug 20 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-4mdk
-- new fstab munching code
-
-* Sat Aug 18 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-3mdk
-- new diskdrake (with interactive version => newt)
-- drakxtools-http fix
-
-* Tue Aug 14 2001 dam's <damien@mandrakesoft.com> 1.1.7-2mdk
-- added doc (it's a shame...)
-
-* Tue Aug 14 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-1mdk
-- add drakautoinst
-
-* Mon Aug 13 2001 dam's <damien@mandrakesoft.com> 1.1.6-3mdk
-- snapshot
-
-* Tue Aug 7 2001 dam's <damien@mandrakesoft.com> 1.1.6-2mdk
-- added draknet_splash pixmap
-
-* Tue Aug 7 2001 Pixel <pixel@mandrakesoft.com> 1.1.6-1mdk
-- add drakxtools_http
-
-* Fri Aug 3 2001 dam's <damien@mandrakesoft.com> 1.1.5-106mdk
-- added network/*.pm
-
-* Tue Jul 31 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-105mdk
-- add require perl-MDK-Common
-- fix for cp -rf (fuck FreeBSD (c))
-
-* Tue Jul 31 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-104mdk
-- fix my error: %%files with 2 times "-f <file>" doesn't work :-(
-
-* Mon Jul 30 2001 dam's <damien@mandrakesoft.com> 1.1.5-103mdk
-- updated with cooker install.
-- added require on XFree86-75dpi-fonts
-- merged with pixel specfile to handle mo.
-
-* Mon May 7 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-102mdk
-- updated bootloader.pm according to new lilo package (lilo-{menu,graphic,text})
-
-* Wed Apr 25 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-101mdk
-- updated with oem update for DrakX.
-- minor bug correction on printerdrake.
-- added minor features to XFdrake.
-
-* Wed Apr 18 2001 dam's <damien@mandrakesoft.com> 1.1.5-100mdk
-- added require on usermode.
-- added source 2 and 3.
-- snapshot. netconnect corrections. final package
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-99mdk
-- snapshot. mousedrake corrected. RC6
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-98mdk
-- snapshot. autologin corrected. RC5
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-97mdk
-- snapshot. RC4
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-96mdk
-- snapshot. RC3
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-95mdk
-- snapshot. RC2
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-94mdk
-- snapshot. RC
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-93mdk
-- draknet and tinyfirewall fixes
-
-* Sun Apr 15 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-92mdk
-- bootlook fix & layout
-
-* Fri Apr 13 2001 dam's <damien@mandrakesoft.com> 1.1.5-91mdk
-- snapshot
-
-* Fri Apr 13 2001 dam's <damien@mandrakesoft.com> 1.1.5-90mdk
-- snapshot
-
-* Thu Apr 12 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-89mdk
-- snapshot
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-88mdk
-- snapshot. pcmcia network corrected
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-87mdk
-- snapshot. Better network configuration
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-86mdk
-- snapshot.
-
-* Wed Apr 11 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-85mdk
-- really fix printerdrake and snap.
-
-* Wed Apr 11 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-84mdk
-- fix printerdrake and snap.
-
-* Tue Apr 10 2001 dam's <damien@mandrakesoft.com> 1.1.5-83mdk
-- bug correction.
-
-* Mon Apr 9 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-82mdk
-- snap as always
-
-* Mon Apr 9 2001 Yves Duret <yduret@mandraksoft.com> 1.1.5-81mdk
-- snaphshot again and again
-
-* Mon Apr 9 2001 dam's <damien@mandrakesoft.com> 1.1.5-80mdk
-- snapshot. bug fix
-
-* Sun Apr 8 2001 dam's <damien@mandrakesoft.com> 1.1.5-79mdk
-- snapshot. bug fix.
-
-* Sun Apr 8 2001 dam's <damien@mandrakesoft.com> 1.1.5-78mdk
-- added require on XFree86-100dpi-fonts
-- various debugging
-- new tinyfirewall
-
-* Sun Apr 8 2001 dam's <damien@mandrakesoft.com> 1.1.5-77mdk
-- snapshot
-- net_monitor added.
-
-* Fri Apr 6 2001 dam's <damien@mandrakesoft.com> 1.1.5-76mdk
-- corrected compilation error.
-
-* Fri Apr 6 2001 yves <yduret@mandrakesoft.com> 1.1.5-75mdk
-- snapshot : drakgw updated, boot config fix
-
-* Thu Apr 5 2001 dam's <damien@mandrakesoft.com> 1.1.5-74mdk
-- snapshot.
-
-* Mon Apr 2 2001 dam's <damien@mandrakesoft.com> 1.1.5-73mdk
-- snapshot.
-
-* Mon Apr 2 2001 dam's <damien@mandrakesoft.com> 1.1.5-72mdk
-- snapshot, typo fixs.
-
-* Fri Mar 30 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-71mdk
-- snapshot & fixes
-
-* Fri Mar 30 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-70mdk
-- snapshot : boot coonfig updated
-
-* Thu Mar 29 2001 dam's <damien@mandrakesoft.com> 1.1.5-69mdk
-- snapshot
-
-* Thu Mar 29 2001 dam's <damien@mandrakesoft.com> 1.1.5-68mdk
-- snapshot.
-
-* Thu Mar 29 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-67mdk
-- new snapshot (XFdrake should be working)
-
-* Wed Mar 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-66mdk
-- corrected tinyfirewall last step
-
-* Wed Mar 28 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-65mdk
-- fixed wrong generation of second mouse support
-
-* Wed Mar 28 2001 François Pons <fpons@mandrakesoft.com> 1.1.5-64mdk
-- fixed multi-mouse support for XF3
-- fixed XFdrake (read old config file before so probe overwrite)
-
-* Wed Mar 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-63mdk
-- added draksec embedded mode
-- corrected tinyfirewall for 2.4 kernels
-- corrected bad translations in draknet
-
-* Tue Mar 27 2001 dam's <damien@mandrakesoft.com> 1.1.5-62mdk
-- idem.
-
-* Sat Mar 24 2001 dam's <damien@mandrakesoft.com> 1.1.5-61mdk
-- corrected tinyfirewall
-
-* Fri Mar 23 2001 dam's <damien@mandrakesoft.com> 1.1.5-60mdk
-- snapshot
-- corrected require.
-
-* Fri Mar 23 2001 dam's <damien@mandrakesoft.com> 1.1.5-59mdk
-- added ldetect in require.
-- tinyfirewall included.
-
-* Thu Mar 22 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-58mdk
-- updated drakboot, new snapshot
-
-* Thu Mar 22 2001 dam's <damien@mandrakesoft.com> 1.1.5-57mdk
-- draknet without mail conf, new snapshot.
-
-* Thu Mar 22 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-56mdk
-- new version that will work with perl-base (at least XFdrake)
-
-* Thu Mar 22 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-55mdk
-- require perl-base not perl, it should be enough
-
-* Thu Mar 22 2001 dam's <damien@mandrakesoft.com> 1.1.5-54mdk
-- first release with tinyfirewall. Not stable.
-- corrected gmon pb, I suck.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-53mdk
-- corrected bad links.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-52mdk
-- no crash anymore.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-51mdk
-- updated draknet. new snapshot.
-
-* Wed Mar 14 2001 dam's <damien@mandrakesoft.com> 1.1.5-50mdk
-- some minor label improvements.
-
-* Tue Mar 13 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-49mdk
-- updated bootlook
-- macros
-
-* Mon Mar 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-48mdk
-- correted wizard pixmaps name
-
-* Mon Mar 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-47mdk
-- new and shinny drakxservices
-
-* Tue Mar 6 2001 dam's <damien@mandrakesoft.com> 1.1.5-46mdk
-- XFdrake works + other improvements
-
-* Thu Mar 1 2001 dam's <damien@mandrakesoft.com> 1.1.5-45mdk
-- updated embedded mode.
-
-* Wed Feb 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-44mdk
-- XFdrake : new look.
-- draknet : some corrections.
-- install : some improvements
-
-* Mon Feb 26 2001 dam's <damien@mandrakesoft.com> 1.1.5-43mdk
-- corrected draknet, and some other stuff
-
-* Mon Feb 26 2001 dam's <damien@mandrakesoft.com> 1.1.5-42mdk
-- new draknet, with wizard and profiles.
-- drakboot short-circuited.
-- new pixmaps policy.
-
-* Fri Feb 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-41mdk
-- require perl-GTK-GdkImlib, fix XFdrake and draknet with no perl-GTK
-
-* Fri Feb 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-40mdk
-- split in drakxtools and drakxtools-newt
-
-* Thu Feb 8 2001 dam's <damien@mandrakesoft.com> 1.1.5-39mdk
-- install() and SHAR_PATH bug fixed in standalone.pm
-
-* Thu Feb 8 2001 dam's <damien@mandrakesoft.com> 1.1.5-38mdk
-- bug fix.
-
-* Thu Feb 8 2001 dam's <damien@mandrakesoft.com> 1.1.5-37mdk
-- bug correction inclusion.
-
-* Wed Feb 7 2001 dam's <damien@mandrakesoft.com> 1.1.5-36mdk
-- snapshot. Included embedded mode (for control-center), and wizard mode.
-
-* Mon Dec 18 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-35mdk
-- new version (lspcidrake not here anymore, requires ldetect-lst => don't
-include pcitable/... anymore)
-
-
-* Tue Nov 14 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-34mdk
-- snapshot
-- get rid of the rpmlib dependency
-
-* Sat Oct 21 2000 dam's <damien@mandrakesoft.com> 1.1.5-33mdk
-- RC1_fixed tagged cvs version.
-- Video cards handling enhanced
-- isa isdn-cards and non detected isdn pci-cards spported.
-
-* Thu Oct 19 2000 dam's <damien@mandrakesoft.com> 1.1.5-32mdk
-- snapshot.
-
-* Mon Oct 9 2000 dam's <damien@mandrakesoft.com> 1.1.5-31mdk
-- snapshot.
-
-* Fri Oct 6 2000 dam's <damien@mandrakesoft.com> 1.1.5-30mdk
-- snapshot.
-
-* Fri Oct 6 2000 dam's <damien@mandrakesoft.com> 1.1.5-29.1mdk
-- snapshot. not fully stable.
-
-* Thu Oct 5 2000 dam's <damien@mandrakesoft.com> 1.1.5-29mdk
-- snapshot.
-
-* Thu Oct 05 2000 François Pons <fpons@mandrakesoft.com> 1.1.5-28mdk
-- snapshot.
-
-* Tue Oct 03 2000 François Pons <fpons@mandrakesoft.com> 1.1.5-27mdk
-- snapshot.
-
-* Sun Oct 1 2000 dam's <damien@mandrakesoft.com> 1.1.5-26mdk
-- snapshot.
-
-* Sat Sep 30 2000 dam's <damien@mandrakesoft.com> 1.1.5-25mdk
-- snapshot.
-
-* Sat Sep 30 2000 dam's <damien@mandrakesoft.com> 1.1.5-24mdk
-- snapshot. draknet frozen.
-
-* Fri Sep 29 2000 dam's <damien@mandrakesoft.com> 1.1.5-23mdk
-- snapshot.
-
-* Thu Sep 28 2000 dam's <damien@mandrakesoft.com> 1.1.5-22mdk
-- modified spec.
-- snapshot
-- liveupdate
-
-* Wed Sep 27 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-21mdk
-- snapshot
-
-* Tue Sep 26 2000 dam's <damien@mandrakesoft.com> 1.1.5-20mdk
-- snapshot
-
-* Mon Sep 25 2000 dam's <damien@mandrakesoft.com> 1.1.5-19mdk
-- snapshot.
-
-* Fri Sep 22 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-18mdk
-- new snapshot
-- remove BuildRequires kudzu-devel, I suck bigtime..
-
-* Thu Sep 21 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-17mdk
-- new snapshot
-- BuildRequires kudzu-devel since ddcprobe/ddcxinfos.c uses /usr/include/vbe.h
-
-* Wed Sep 20 2000 dam's <damien@mandrakesoft.com> 1.1.5-16mdk
-- cvs snapshot. See changelog file
-
-* Wed Sep 20 2000 dam's <damien@mandrakesoft.com> 1.1.5-15mdk
-- cvs snapshot. See changelog file
-
-* Fri Sep 15 2000 dam's <damien@mandrakesoft.com> 1.1.5-14mdk
-- cvs snapshot.
-- draknet : better dsl configuration.
-
-* Thu Sep 14 2000 dam's <damien@mandrakesoft.com> 1.1.5-13mdk
-- cvs snapshot.
-- draknet : wizard mode. isdn_db.txt moved to /usr/share. No makedev.sh any more
-
-* Mon Sep 11 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-12mdk
-- add handling for gnome and kde2 in Xdrakres
-
-* Thu Sep 7 2000 dam's <damien@mandrakesoft.com> 1.1.5-11mdk
-- corrected draknet launch error.
-
-* Thu Sep 7 2000 dam's <damien@mandrakesoft.com> 1.1.5-10mdk
-- ISDN connection should work. test it!
-
-* Tue Sep 5 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-9mdk
-- setAutologin fixed in XFdrake
-
-* Tue Sep 5 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-8mdk
-- adduserdrake fixed
-
-* Sat Sep 2 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-7mdk
-- fix some typos in standalone/keyboarddrake
-- add require perl
-
-* Sat Sep 2 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-6mdk
-- add %%lang tags
-
-* Tue Aug 29 2000 dam's <damien@mandrakesoft.com> 1.1.5-5mdk
-- draknet : isa cards better recognized.
-
-* Mon Aug 28 2000 dam's <damien@mandrakesoft.com> 1.1.5-4mdk
-- corrected draknet. Please test it!
-
-* Sun Aug 27 2000 dam's <damien@mandrakesoft.com> 1.1.5-3mdk
-- Added draknet in standalone
-
-* Fri Aug 18 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-2mdk
-- add requires to modutils >= 2.3.11 because drakgw is reading
- /etc/modules.conf which has been introduced in 2.3.11
-
-* Fri Aug 18 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-1mdk
-- added `drakgw' in standalone (Internet Connection Sharing tool)
-
-* Fri Aug 11 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-3mdk
-- new snapshot
-
-* Thu Aug 10 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-2mdk
-- add noreplace for diskdrake.rc
-
-* Thu Aug 10 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-1mdk
-- new snapshot
-
-* Mon Aug 07 2000 Frederic Lepied <flepied@mandrakesoft.com> 1.1.3-2mdk
-- automatically added BuildRequires
-
-* Fri Jul 21 2000 Pixel <pixel@mandrakesoft.com> 1.1.3-1mdk
-- new version, BM
-
-* Wed Jul 05 2000 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.2-2mdk
-- build against new libbz2
-
-* Mon Jun 26 2000 Pixel <pixel@mandrakesoft.com> 1.1.2-1mdk
-- new version
-
-* Tue Jun 13 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-13mdk
-- hopefully fix XFdrake and DDR nvidia cards (silly xfree that is)
-
-* Mon Jun 5 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-12mdk
-- fix sbus missing
-
-* Sat Jun 3 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-10mdk
-- fix draksec calling init.sh instead of msec
-
-* Thu May 25 2000 Chmouel Boudjnah <chmouel@mandrakesoft.com> 1.1.1-9mdk
-- Don't display x86 stuff on drakboot when we are on others arch.
-
-* Thu May 25 2000 François Pons <fpons@mandrakesoft.com> 1.1.1-8mdk
-- update with first version for sparc and sparc64.
-- fix for printer configuration for SAMBA and NCP (security issue).
-
-* Tue May 9 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-7mdk
-- many small fixes (bis)
-
-* Tue May 2 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-6mdk
-- many small fixes
-
-* Wed Apr 26 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-5mdk
-- new version (fix in adduserdrake, enhance interactive_newt)
-
-* Wed Apr 19 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-4mdk
-- llseek works, not lseek64 :( (need more testing)
-
-* Wed Apr 19 2000 François Pons <fpons@mandrakesoft.com> 1.1.1-3mdk
-- updated with CVS of DrakX.
-
-* Fri Mar 31 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-2mdk
-- obsoletes setuptool, link setuptool to drakxconf
-
-* Fri Mar 31 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-1mdk
-- new version (added drakboot for lilo/grub, XFdrake -xf4 for XFree4)
-
-* Sat Mar 25 2000 Pixel <pixel@mandrakesoft.com> 1.1-1mdk
-- new group
-- new version
-
-* Wed Jan 12 2000 François PONS <fpons@mandrakesoft.com>
-- complete update with DrakX, small fixe on printerdrake again.
-
-* Wed Jan 12 2000 François PONS <fpons@mandrakesoft.com>
-- corrected missing generic postscript and text driver for
- printderdrake.
-
-* Wed Jan 12 2000 François PONS <fpons@mandrakesoft.com>
-- corrected bad resolution setting in printerdrake.
-
-* Wed Jan 12 2000 François PONS <fpons@mandrakesoft.com>
-- fixed print on STDOUT in printerdrake.
-- corrected printerdrake against not available drivers in gs.
-
-* Mon Jan 10 2000 Pixel <pixel@mandrakesoft.com>
-- new version (bis)
-- printerdrake install rhs-printfilters via urpmi if needed
-
-* Fri Jan 07 2000 François PONS <fpons@mandrakesoft.com>
-- updated XFdrake and PrinterDrake.
-
-* Fri Jan 7 2000 Pixel <pixel@mandrakesoft.com>
-- fixed a bug causing no i18n for rpmdrake
-- add require urpmi
-
-* Thu Jan 6 2000 Pixel <pixel@mandrakesoft.com>
-- fix an error case in XFdrake
-
-* Tue Jan 4 2000 Pixel <pixel@mandrakesoft.com>
-- adduserdrake accept user names on command line
-- minor fixes
-
-* Fri Dec 31 1999 Pixel <pixel@mandrakesoft.com>
-- 32mdk
-
-* Wed Dec 29 1999 Pixel <pixel@mandrakesoft.com>
-- make rpmlint happier
-- minor fixes
-
-* Mon Dec 27 1999 Pixel <pixel@mandrakesoft.com>
-- better XFdrake and minor fixes
-
-* Fri Dec 24 1999 Pixel <pixel@mandrakesoft.com>
-- new version (better adduserdrake and more)
-- add /usr/bin/* (for lspcidrake)
-
-* Wed Dec 22 1999 Pixel <pixel@mandrakesoft.com>
-- do not try display :0 if DISPLAY is unset
-
-* Mon Dec 20 1999 Pixel <pixel@mandrakesoft.com>
-- fixed a bug in drakxservices
-- XFdrake now install XFree86 and XFree86-75dpi-fonts if needed
-- XFdrake now calls /etc/rc.d/init.d/xfs start if needed
-- minor fix
-
-* Sat Dec 18 1999 Pixel <pixel@mandrakesoft.com>
-- added kpackage's icons for rpmdrake
-
-* Thu Dec 16 1999 Pixel <pixel@mandrakesoft.com>
-- bzip2 .po's
-- mount /proc in XFdrake to avoid freeze when called by kudzu
-- added Xdrakres
-
-* Thu Dec 16 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Remove the netdrake ghost.
-
-* Thu Dec 16 1999 Pixel <pixel@mandrakesoft.com>
-- fix draksec
-- many changes in libDrakX
-
-* Sat Dec 11 1999 Pixel <pixel@mandrakesoft.com>
-- adduserdrake added and some more
-
-* Thu Dec 9 1999 Pixel <pixel@linux-mandrake.com>
-- added drakxconf, drakxservices
-- handle non root via kdesu if X
-- warning go to syslog
-
-* Wed Dec 8 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Add %post and %postun to link redhat tools to our tools.
-- Obsoletes: Xconfigurator mouseconfig kbdconfig printtool
-- A lots of changes/fix.
-
-* Thu Dec 2 1999 Pixel <pixel@linux-mandrake.com>
-- keyboarddrake added, and many changes
-- fixed typos
-
-* Fri Nov 26 1999 Pixel <pixel@linux-mandrake.com>
-- new version (printerdrake) (did i say lspcidrake was there too?)
-
-* Wed Nov 24 1999 Pixel <pixel@linux-mandrake.com>
-- new version
-- fixed *.o bundled in the %source
-
-* Sun Nov 21 1999 Pixel <pixel@mandrakesoft.com>
-- removed %config for diskdrake.rc (should i?)
-- removed xtest from the requires
-- added %config for diskdrake.rc (should i?)
-- strip .so and ddcxinfos (nice rpmlint :)
-
-* Sat Nov 20 1999 Pixel <pixel@mandrakesoft.com>
-- added MonitorsDB to %files (silly me:-!)
-
-* Thu Nov 18 1999 Pixel <pixel@mandrakesoft.com>
-- precised the required version for perl-GTK
-
-* Thu Nov 18 1999 Pixel <pixel@mandrakesoft.com>
-- First version
-
-
-# end of file
diff --git a/perl-install/fs.pm b/perl-install/fs.pm
deleted file mode 100644
index 10da0e72c..000000000
--- a/perl-install/fs.pm
+++ /dev/null
@@ -1,868 +0,0 @@
-package fs; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::System;
-use MDK::Common::Various;
-use common;
-use log;
-use devices;
-use partition_table qw(:types);
-use run_program;
-use swap;
-use detect_devices;
-use modules;
-use fsedit;
-use loopback;
-
-
-sub read_fstab {
- my ($prefix, $file, $all_options) = @_;
-
- my %comments;
- my $comment;
- my @l = grep {
- if (/^\s*#/) {
- $comment .= chomp_($_) . "\n";
- 0;
- } else {
- $comments{$_} = $comment if $comment;
- $comment = '';
- 1;
- }
- } cat_("$prefix$file");
-
- #- attach comments at the end of fstab to the previous line
- $comments{$l[-1]} = $comment if $comment;
-
- map {
- my ($dev, $mntpoint, $type, $options, $freq, $passno) = split;
- my $comment = $comments{$_};
-
- $options = 'defaults' if $options eq 'rw'; # clean-up for mtab read
-
- $type = fs2type($type);
- if ($type eq 'supermount') {
- # normalize this bloody supermount
- $options = join(",", 'supermount', grep {
- if (/fs=(.*)/) {
- $type = $1;
- 0;
- } elsif (/dev=(.*)/) {
- $dev = $1;
- 0;
- } elsif ($_ eq '--') {
- 0;
- } else {
- 1;
- }
- } split(',', $options));
- } elsif ($type eq 'smb') {
- # prefering type "smbfs" over "smb"
- $type = 'smbfs';
- }
- $mntpoint =~ s/\\040/ /g;
- $dev =~ s/\\040/ /g;
-
- my $h = {
- device => $dev, mntpoint => $mntpoint, type => $type,
- options => $options, comment => $comment,
- if_($all_options, freq => $freq, passno => $passno),
- };
-
- ($h->{major}, $h->{minor}) = unmakedev((stat "$prefix$dev")[6]);
-
- if ($dev =~ m,/(tmp|dev)/,) {
- my $symlink = readlink("$prefix$dev");
- $dev =~ s,/(tmp|dev)/,,;
-
- if ($symlink =~ m|^[^/]+$|) {
- $h->{device_alias} = $dev;
- $h->{device} = $symlink;
- } else {
- $h->{device} = $dev;
- }
- }
-
- if ($h->{options} =~ /credentials=/) {
- require network::smb;
- #- remove credentials=file with username=foo,password=bar,domain=zoo
- #- the other way is done in fstab_to_string
- my ($options, $unknown) = mount_options_unpack($h);
- my $file = delete $options->{'credentials='};
- my $credentials = network::smb::read_credentials_raw("$prefix$file");
- if ($credentials->{username}) {
- $options->{"$_="} = $credentials->{$_} foreach qw(username password domain);
- mount_options_pack($h, $options, $unknown);
- }
- }
-
- $h;
- } @l;
-}
-
-sub merge_fstabs {
- my ($loose, $fstab, @l) = @_;
-
- foreach my $p (@$fstab) {
- my ($p2) = grep { fsedit::is_same_hd($_, $p) } @l or next;
- @l = grep { !fsedit::is_same_hd($_, $p) } @l;
-
- $p->{mntpoint} = $p2->{mntpoint} if delete $p->{unsafeMntpoint};
-
- $p->{type} = $p2->{type} if $p2->{type} && !$loose;
- $p->{options} = $p2->{options} if $p2->{options} && !$loose;
- #- important to get isMounted property else DrakX may try to mount already mounted partitions :-(
- add2hash($p, $p2);
- $p->{device_alias} ||= $p2->{device_alias} || $p2->{device} if $p->{device} ne $p2->{device} && $p2->{device} !~ m|/|;
-
- $p->{type} && $p2->{type} && $p->{type} ne $p2->{type} && type2fs($p) ne type2fs($p2) &&
- $p->{type} ne 'auto' && $p2->{type} ne 'auto' and
- log::l("err, fstab and partition table do not agree for $p->{device} type: " .
- (type2fs($p) || type2name($p->{type})) . " vs ", (type2fs($p2) || type2name($p2->{type})));
- }
- @l;
-}
-
-sub add2all_hds {
- my ($all_hds, @l) = @_;
-
- @l = merge_fstabs('', [ fsedit::get_really_all_fstab($all_hds) ], @l);
-
- foreach (@l) {
- my $s =
- isThisFs('nfs', $_) ? 'nfss' :
- isThisFs('smbfs', $_) ? 'smbs' :
- 'special';
- push @{$all_hds->{$s}}, $_;
- }
-}
-
-sub get_major_minor {
- eval {
- my (undef, $major, $minor) = devices::entry($_->{device});
- ($_->{major}, $_->{minor}) = ($major, $minor);
- } foreach @_;
-}
-
-sub merge_info_from_mtab {
- my ($fstab) = @_;
-
- my @l1 = map { my $l = $_;
- my %l = (type => fs2type('swap'));
- $l{$_} = $l->{$_} foreach qw(device major minor);
- \%l;
- } read_fstab('', '/proc/swaps');
-
- my @l2 = map { read_fstab('', $_) } '/etc/mtab', '/proc/mounts';
-
- foreach (@l1, @l2) {
- log::l("found mounted partition on $_->{device} with $_->{mntpoint}");
- if ($::isInstall && $_->{mntpoint} eq '/tmp/hdimage') {
- log::l("found hdimage on $_->{device}");
- $_->{real_mntpoint} = delete $_->{mntpoint};
- $_->{mntpoint} = common::usingRamdisk() && "/mnt/hd"; #- remap for hd install.
- }
- $_->{isMounted} = $_->{isFormatted} = 1;
- delete $_->{options};
- }
- merge_fstabs('loose', $fstab, @l1, @l2);
-}
-
-# - when using "$loose", it does not merge in type&options from the fstab
-sub merge_info_from_fstab {
- my ($fstab, $prefix, $uniq, $loose) = @_;
-
- my @l = grep {
- if ($uniq) {
- my $part = fsedit::mntpoint2part($_->{mntpoint}, $fstab);
- !$part || fsedit::is_same_hd($part, $_); #- keep it only if it is the mountpoint AND the same device
- } else {
- 1;
- }
- } read_fstab($prefix, "/etc/fstab", 'all_options');
-
- merge_fstabs($loose, $fstab, @l);
-}
-
-sub prepare_write_fstab {
- my ($all_hds, $prefix, $keep_smb_credentials) = @_;
- $prefix ||= '';
-
- my @l1 = (fsedit::get_really_all_fstab($all_hds), @{$all_hds->{special}});
- my @l2 = read_fstab($prefix, "/etc/fstab", 'all_options');
-
- {
- #- remove entries from @l2 that are given by @l1
- #- this is needed to allow to unset a mount point
- my %new;
- $new{$_->{device}} = 1 foreach @l1;
- delete $new{none}; #- special case for device "none" which can be _mounted_ more than once
- @l2 = grep { !$new{$_->{device}} } @l2;
- }
-
- my %new;
- my @smb_credentials;
- my @l = map {
- my $device =
- $_->{device} eq 'none' || member($_->{type}, qw(nfs smbfs)) ?
- $_->{device} :
- isLoopback($_) ?
- ($_->{mntpoint} eq '/' ? "/initrd/loopfs" : "$_->{loopback_device}{mntpoint}") . $_->{loopback_file} :
- do {
- my $dir = $_->{device} =~ m|^/| ? '' : '/dev/';
- eval { devices::make("$prefix$dir$_->{device}") };
- "$dir$_->{device}";
- };
-
- my $real_mntpoint = $_->{mntpoint} || ${{ '/tmp/hdimage' => '/mnt/hd' }}{$_->{real_mntpoint}};
- mkdir("$prefix$real_mntpoint", 0755) if $real_mntpoint =~ m|^/|;
- my $mntpoint = loopback::carryRootLoopback($_) ? '/initrd/loopfs' : $real_mntpoint;
-
- my ($freq, $passno) =
- exists $_->{freq} ?
- ($_->{freq}, $_->{passno}) :
- isTrueFS($_) && $_->{options} !~ /encryption=/ ?
- (1, $_->{mntpoint} eq '/' ? 1 : loopback::carryRootLoopback($_) ? 0 : 2) :
- (0, 0);
-
- if (($device eq 'none' || !$new{$device}) && ($mntpoint eq 'swap' || !$new{$mntpoint})) {
- #- keep in mind the new line for fstab.
- $new{$device} = 1;
- $new{$mntpoint} = 1;
-
- my $options = $_->{options};
-
- if (isThisFs('smbfs', $_) && $options =~ /password=/ && !$keep_smb_credentials) {
- require network::smb;
- if (my ($opts, $smb_credentials) = network::smb::fstab_entry_to_credentials($_)) {
- $options = $opts;
- push @smb_credentials, $smb_credentials;
- }
- }
-
- my $type = type2fs($_);
-
- my $dev = $_->{device_alias} ? "/dev/$_->{device_alias}" : $device;
-
- $mntpoint =~ s/ /\\040/g;
- $dev =~ s/ /\\040/g;
-
- # handle bloody supermount special case
- if ($options =~ /supermount/) {
- my @l = grep { $_ ne 'supermount' } split(',', $options);
- my @l1 = grep { member($_, 'ro', 'exec') } @l;
- my @l2 = difference2(\@l, \@l1);
- $options = join(",", "dev=$dev", "fs=$type", @l1, if_(@l2, '--', @l2));
- ($dev, $type) = ('none', 'supermount');
- }
-
- [ $mntpoint, $_->{comment} . join(' ', $dev, $mntpoint, $type, $options || 'defaults', $freq, $passno) . "\n" ];
- } else {
- ()
- }
- } grep { $_->{device} && ($_->{mntpoint} || $_->{real_mntpoint}) && $_->{type} } (@l1, @l2);
-
- join('', map { $_->[1] } sort { $a->[0] cmp $b->[0] } @l), \@smb_credentials;
-}
-
-sub fstab_to_string {
- my ($all_hds, $prefix) = @_;
- my ($s, undef) = prepare_write_fstab($all_hds, $prefix, 'keep_smb_credentials');
- $s;
-}
-
-sub write_fstab {
- my ($all_hds, $prefix) = @_;
- log::l("writing $prefix/etc/fstab");
- my ($s, $smb_credentials) = prepare_write_fstab($all_hds, $prefix, '');
- output("$prefix/etc/fstab", $s);
- network::smb::save_credentials($_) foreach @$smb_credentials;
-}
-
-sub auto_fs() {
- grep { chop; $_ && !/nodev/ } cat_("/etc/filesystems");
-}
-
-sub mount_options {
- my %non_defaults = (
- sync => 'async', noatime => 'atime', noauto => 'auto', ro => 'rw',
- user => 'nouser', nodev => 'dev', noexec => 'exec', nosuid => 'suid',
- );
- my @user_implies = qw(noexec nodev nosuid);
- \%non_defaults, \@user_implies;
-}
-
-# simple function
-# use mount_options_unpack + mount_options_pack for advanced stuff
-sub add_options(\$@) {
- my ($option, @options) = @_;
- my %l; @l{split(',', $$option), @options} = (); delete $l{defaults};
- $$option = join(',', keys %l) || "defaults";
-}
-
-sub mount_options_unpack {
- my ($part) = @_;
- my $packed_options = $part->{options};
-
- my ($non_defaults, $user_implies) = mount_options();
-
- my @auto_fs = auto_fs();
- my %per_fs = (
- iso9660 => [ qw(unhide) ],
- vfat => [ qw(umask=0) ],
- nfs => [ qw(rsize=8192 wsize=8192) ],
- smbfs => [ qw(username= password=) ],
- reiserfs => [ 'notail' ],
- );
- push @{$per_fs{$_}}, 'usrquota', 'grpquota' foreach 'ext2', 'ext3', 'xfs';
-
- while (my ($fs, $l) = each %per_fs) {
- isThisFs($fs, $part) || $part->{type} eq 'auto' && member($fs, @auto_fs) or next;
- $non_defaults->{$_} = 1 foreach @$l;
- }
-
- $non_defaults->{encrypted} = 1 if !$part->{isFormatted} || isSwap($part);
-
- $non_defaults->{supermount} = 1 if member(type2fs($part), 'auto', @auto_fs);
-
- my $defaults = { reverse %$non_defaults };
- my %options = map { $_ => '' } keys %$non_defaults;
- my @unknown;
- foreach (split(",", $packed_options)) {
- if ($_ eq 'user') {
- $options{$_} = 1 foreach ('user', @$user_implies);
- } elsif (exists $non_defaults->{$_}) {
- $options{$_} = 1;
- } elsif ($defaults->{$_}) {
- $options{$defaults->{$_}} = 0;
- } elsif (/(.*?=)(.*)/) {
- $options{$1} = $2;
- } else {
- push @unknown, $_;
- }
- }
- # merge those, for cleaner help
- $options{'rsize=8192,wsize=8192'} = delete $options{'rsize=8192'} && delete $options{'wsize=8192'}
- if exists $options{'rsize=8192'};
-
- my $unknown = join(",", @unknown);
- \%options, $unknown;
-}
-
-sub mount_options_pack_ {
- my ($part, $options, $unknown) = @_;
-
- my ($non_defaults, $user_implies) = mount_options();
- my @l;
-
- if (delete $options->{user}) {
- push @l, 'user';
- foreach (@$user_implies) {
- if (!delete $options->{$_}) {
- # overriding
- $options->{$non_defaults->{$_}} = 1;
- }
- }
- }
- push @l, map_each { if_($::b, $::a =~ /=$/ ? "$::a$::b" : $::a) } %$options;
- push @l, $unknown;
-
- join(",", uniq(grep { $_ } @l));
-}
-sub mount_options_pack {
- my ($part, $options, $unknown) = @_;
- $part->{options} = mount_options_pack_($part, $options, $unknown);
- MDK::Common::Various::noreturn();
-}
-
-sub mount_options_help {
- my %help = map { $_ => '' } @_;
- my %short = map { if_(/(.*?)=/, "$1=" => $_) } keys %help;
-
- foreach (split(':', $ENV{LANGUAGE}), '') {
- my $manpage = "/usr/share/man/$_/man8/mount.8.bz2";
- -e $manpage or next;
-
- my ($tp, $option);
- foreach (`bzip2 -dc $manpage`) {
- my $prev_tp = $tp;
- $tp = /^\.(TP|RE)/;
- my ($s) = /^\.B (.*)/;
- if ($prev_tp && $s eq '\-o' .. /X^/) {
- if (my $v = $prev_tp && $s =~ /^[a-z]/i .. $tp) {
- if ($v == 1) {
- $s = $short{$s} || $s;
- $option = exists $help{$s} && !$help{$s} ? $s : '';
- } elsif ($v !~ 'E0') {
- s/\\//g;
- s/\s*"(.*?)"\s*/$1/g if s/^\.BR\s+//;
- s/^\.B\s+//;
- $help{$option} .= $_ if $option;
- }
- }
- }
- }
- }
- %help;
-}
-
-sub set_default_options {
- my ($part, $is_removable, $useSupermount, $security, $iocharset, $codepage) = @_;
-
- my ($options, $unknown) = mount_options_unpack($part);
-
- if ($is_removable) {
- $options->{supermount} = $useSupermount;
- $part->{type} = 'auto'; # if supermount, code below will handle choosing the right type
- }
-
- my $is_auto = isThisFs('auto', $part);
-
- if ($part->{media_type} eq 'cdrom') {
- $options->{ro} = 1;
- }
-
- if ($part->{media_type} eq 'fd') {
- # slow device so don't loose time, write now!
- $options->{sync} = 1;
- }
-
- if (isTrueFS($part)) {
- #- noatime on laptops (do not wake up the hd)
- #- Do not update inode access times on this
- #- file system (e.g, for faster access on the
- #- news spool to speed up news servers).
- $options->{noatime} = detect_devices::isLaptop();
- }
- if (isThisFs('nfs', $part)) {
- put_in_hash($options, {
- nosuid => 1, 'rsize=8192,wsize=8192' => 1, soft => 1,
- });
- }
- if (isFat($part) || $is_auto) {
-
- put_in_hash($options, {
- user => 1, noexec => 0,
- }) if !exists $part->{rootDevice}; # partition means no removable media
-
- put_in_hash($options, {
- 'umask=0' => $security < 3, 'iocharset=' => $iocharset, 'codepage=' => $codepage,
- });
- }
- if (isThisFs('ntfs', $part) || $is_auto) {
- put_in_hash($options, { 'iocharset=' => $iocharset });
- }
- if (isThisFs('iso9660', $part) || $is_auto) {
- put_in_hash($options, { user => 1, noexec => 0, 'iocharset=' => $iocharset });
- }
- if (isThisFs('reiserfs', $part)) {
- $options->{notail} = 1;
- }
- if (isLoopback($part) && !isSwap($part)) { #- no need for loop option for swap files
- $options->{loop} = 1;
- }
-
- # rationalize: no need for user
- if ($options->{autofs} || $options->{supermount}) {
- $options->{user} = 0;
- }
-
- # have noauto when we have user
- $options->{noauto} = 1 if $options->{user};
-
- if ($options->{user}) {
- # ensure security (user_implies - noexec as noexec is not a security matter)
- $options->{$_} = 1 foreach 'nodev', 'nosuid';
- }
-
- mount_options_pack($part, $options, $unknown);
-}
-
-sub set_all_default_options {
- my ($all_hds, $useSupermount, $security, $iocharset, $codepage) = @_;
-
- my @removables = @{$all_hds->{raw_hds}};
-
- foreach my $part (fsedit::get_really_all_fstab($all_hds)) {
- set_default_options($part, member($part, @removables), $useSupermount, $security, $iocharset, $codepage);
- }
-}
-
-sub set_removable_mntpoints {
- my ($all_hds) = @_;
-
- my %names;
- foreach (@{$all_hds->{raw_hds}}) {
- my $name = $_->{media_type};
- if (member($name, 'hd', 'fd')) {
- if (detect_devices::isZipDrive($_)) {
- $name = 'zip';
- } elsif ($name eq 'fd') {
- $name = 'floppy';
- } else {
- log::l("set_removable_mntpoints: don't know what to with hd $_->{device}");
- next;
- }
- }
- if ($name) {
- my $s = ++$names{$name};
- $_->{mntpoint} ||= "/mnt/$name" . ($s == 1 ? '' : $s);
- }
- }
-}
-
-sub get_raw_hds {
- my ($prefix, $all_hds) = @_;
-
- $all_hds->{raw_hds} =
- [
- detect_devices::floppies(),
- detect_devices::cdroms__faking_ide_scsi(),
- detect_devices::zips__faking_ide_scsi(),
- ];
- get_major_minor(@{$all_hds->{raw_hds}});
-
- my @fstab = read_fstab($prefix, "/etc/fstab", 'all_options');
- $all_hds->{nfss} = [ grep { isThisFs('nfs', $_) } @fstab ];
- $all_hds->{smbs} = [ grep { isThisFs('smbfs', $_) } @fstab ];
- $all_hds->{special} = [
- (grep { isThisFs('tmpfs', $_) } @fstab),
- { device => 'none', mntpoint => '/proc', type => 'proc' },
- { device => 'none', mntpoint => '/dev/pts', type => 'devpts', options => 'mode=0620' },
- ];
-}
-
-################################################################################
-# formatting functions
-################################################################################
-sub disable_forced_fsck {
- my ($dev) = @_;
- run_program::run("tune2fs", "-c0", "-i0", devices::make($dev));
-}
-
-sub format_ext2($@) {
- #- mke2fs -b (1024|2048|4096) -c -i(1024 > 262144) -N (1 > 100000000) -m (0-100%) -L volume-label
- #- tune2fs
- my ($dev, @options) = @_;
- $dev =~ m,(rd|ida|cciss)/, and push @options, qw(-b 4096 -R stride=16); #- For RAID only.
- push @options, qw(-b 1024 -O none) if arch() =~ /alpha/;
- run_program::run("mke2fs", @options, devices::make($dev)) or die _("%s formatting of %s failed", "ext2", $dev);
-}
-sub format_ext3 {
- my ($dev, @options) = @_;
- format_ext2($dev, "-j", @options);
- disable_forced_fsck($dev);
-}
-sub format_reiserfs {
- my ($dev, @options) = @_;
- #TODO add -h tea
- run_program::run("mkreiserfs", "-ff", @options, devices::make($dev)) or die _("%s formatting of %s failed", "reiserfs", $dev);
-}
-sub format_xfs {
- my ($dev, @options) = @_;
- run_program::run("mkfs.xfs", "-f", "-q", @options, devices::make($dev)) or die _("%s formatting of %s failed", "xfs", $dev);
-}
-sub format_jfs {
- my ($dev, @options) = @_;
- run_program::run("mkfs.jfs", "-f", @options, devices::make($dev)) or die _("%s formatting of %s failed", "jfs", $dev);
-}
-sub format_dos {
- my ($dev, @options) = @_;
- run_program::run("mkdosfs", @options, devices::make($dev)) or die _("%s formatting of %s failed", "dos", $dev);
-}
-sub format_hfs {
- my ($dev, @options) = @_;
- run_program::run("hformat", @options, devices::make($dev)) or die _("%s formatting of %s failed", "HFS", $dev);
-}
-sub real_format_part {
- my ($part) = @_;
-
- $part->{isFormatted} and return;
-
- my $dev = $part->{real_device} || $part->{device};
-
- my @options = $part->{toFormatCheck} ? "-c" : ();
- log::l("formatting device $dev (type ", type2name($part->{type}), ")");
-
- if (isExt2($part)) {
- push @options, "-F" if isLoopback($part);
- push @options, "-m", "0" if $part->{mntpoint} =~ m|^/home|;
- format_ext2($dev, @options);
- } elsif (isThisFs("ext3", $part)) {
- push @options, "-m", "0" if $part->{mntpoint} =~ m|^/home|;
- format_ext3($dev, @options);
- } elsif (isThisFs("reiserfs", $part)) {
- format_reiserfs($dev, @options, if_(c::kernel_version() =~ /^\Q2.2/, "-v", "1"));
- } elsif (isThisFs("xfs", $part)) {
- format_xfs($dev, @options);
- } elsif (isThisFs("jfs", $part)) {
- format_jfs($dev, @options);
- } elsif (isDos($part)) {
- format_dos($dev, @options);
- } elsif (isWin($part)) {
- format_dos($dev, @options, '-F', 32);
- } elsif (isThisFs('hfs', $part)) {
- format_hfs($dev, @options, '-l', "Untitled");
- } elsif (isAppleBootstrap($part)) {
- format_hfs($dev, @options, '-l', "bootstrap");
- } elsif (isSwap($part)) {
- my $check_blocks = grep { /^-c$/ } @options;
- swap::make($dev, $check_blocks);
- } else {
- die _("I don't know how to format %s in type %s", $_->{device}, type2name($_->{type}));
- }
- $part->{isFormatted} = 1;
-}
-sub format_part {
- my ($raids, $part, $prefix) = @_;
- if (isRAID($part)) {
- require raid;
- raid::format_part($raids, $part);
- } elsif (isLoopback($part)) {
- loopback::format_part($part, $prefix);
- } else {
- real_format_part($part);
- }
-}
-
-################################################################################
-# mounting functions
-################################################################################
-sub set_loop {
- my ($part) = @_;
- if (!$part->{real_device}) {
- eval { modules::load('loop') };
- $part->{real_device} = devices::set_loop(devices::make($part->{device}), $part->{encrypt_key}, $part->{options} =~ /encryption=(\w+)/);
- }
-}
-
-sub formatMount_part {
- my ($part, $raids, $fstab, $prefix, $callback) = @_;
-
- if (isLoopback($part)) {
- formatMount_part($part->{loopback_device}, $raids, $fstab, $prefix, $callback);
- }
- if (my $p = up_mount_point($part->{mntpoint}, $fstab)) {
- formatMount_part($p, $raids, $fstab, $prefix, $callback) unless loopback::carryRootLoopback($part);
- }
- if ($part->{encrypt_key}) {
- set_loop($part);
- }
- if ($part->{toFormat}) {
- $callback->($part) if $callback;
- format_part($raids, $part, $prefix);
- }
- mount_part($part, $prefix);
-}
-
-sub formatMount_all {
- my ($raids, $fstab, $prefix, $callback) = @_;
- formatMount_part($_, $raids, $fstab, $prefix, $callback)
- foreach sort { isLoopback($a) ? 1 : isSwap($a) ? -1 : 0 } grep { $_->{mntpoint} } @$fstab;
-
- #- ensure the link is there
- loopback::carryRootCreateSymlink($_, $prefix) foreach @$fstab;
-
- #- for fun :)
- #- that way, when install exits via ctrl-c, it gives hand to partition
- eval {
- local $SIG{__DIE__} = 'ignore';
- my ($type, $major, $minor) = devices::entry(fsedit::get_root($fstab)->{device});
- output "/proc/sys/kernel/real-root-dev", makedev($major, $minor);
- };
-}
-
-sub mount {
- my ($dev, $where, $fs, $rdonly, $options) = @_;
- log::l("mounting $dev on $where as type $fs, options $options");
-
- -d $where or mkdir_p($where);
-
- my @fs_modules = qw(vfat hfs romfs ufs reiserfs xfs jfs ext3);
-
- if (member($fs, 'smb', 'smbfs', 'nfs', 'ntfs') && $::isStandalone) {
- system('mount', '-t', $fs, $dev, $where, '-o', $options) == 0 or die _("mounting partition %s in directory %s failed", $dev, $where);
- return; #- do not update mtab, already done by mount(8)
- } elsif (member($fs, 'ext2', 'proc', 'usbdevfs', 'iso9660', @fs_modules)) {
- $dev = devices::make($dev) if $fs ne 'proc' && $fs ne 'usbdevfs';
- $where =~ s|/$||;
-
- my $flag = c::MS_MGC_VAL();
- $flag |= c::MS_RDONLY() if $rdonly;
- my $mount_opt = "";
-
- if ($fs eq 'vfat') {
- $mount_opt = 'check=relaxed';
- } elsif ($fs eq 'reiserfs') {
- #- could be better if we knew if there is a /boot or not
- #- without knowing it, / is forced to be mounted with notail
- # if $where =~ m|/(boot)?$|;
- $mount_opt = 'notail'; #- notail in any case
- } elsif ($fs eq 'ext2') {
- run_program::run("fsck.ext2", "-a", $dev);
- $? & 0x0100 and log::l("fsck corrected partition $dev");
- $? & 0xfeff and die _("fsck failed with exit code %d or signal %d", $? >> 8, $? & 255);
- }
- if (member($fs, @fs_modules)) {
- eval { modules::load($fs) };
- } elsif ($fs eq 'iso9660') {
- eval { modules::load('isofs') };
- }
- if ($fs eq 'ext3' && $::isInstall) {
- # ext3 mount to use the journal
- syscall_('mount', $dev, $where, $fs, $flag, $mount_opt) or die _("mounting partition %s in directory %s failed", $dev, $where) . " ($!)";
- syscall_('umount', $where);
- # really mount as ext2 during install for speed up
- $fs = 'ext2';
- }
- log::l("calling mount($dev, $where, $fs, $flag, $mount_opt)");
- syscall_('mount', $dev, $where, $fs, $flag, $mount_opt) or die _("mounting partition %s in directory %s failed", $dev, $where) . " ($!)";
- } else {
- log::l("skipping mounting $fs partition");
- return;
- }
- local *F;
- open F, ">>/etc/mtab" or return; #- fail silently, /etc must be read-only
- print F "$dev $where $fs defaults 0 0\n";
-}
-
-#- takes the mount point to umount (can also be the device)
-sub umount {
- my ($mntpoint) = @_;
- $mntpoint =~ s|/$||;
- log::l("calling umount($mntpoint)");
- syscall_('umount', $mntpoint) or die _("error unmounting %s: %s", $mntpoint, "$!");
-
- substInFile { $_ = '' if /(^|\s)$mntpoint\s/ } '/etc/mtab'; #- don't care about error, if we can't read, we won't manage to write... (and mess mtab)
-}
-
-sub mount_part {
- my ($part, $prefix, $rdonly) = @_;
-
- #- root carrier's link can't be mounted
- loopback::carryRootCreateSymlink($part, $prefix);
-
- log::l("isMounted=$part->{isMounted}, real_mntpoint=$part->{real_mntpoint}, mntpoint=$part->{mntpoint}");
- if ($part->{isMounted} && $part->{real_mntpoint} && $part->{mntpoint}) {
- log::l("remounting partition on $prefix$part->{mntpoint} instead of $part->{real_mntpoint}");
- if ($::isInstall) { #- ensure partition will not be busy.
- require install_any;
- install_any::getFile('XXX');
- }
- eval {
- umount($part->{real_mntpoint});
- rmdir $part->{real_mntpoint};
- symlinkf "$prefix$part->{mntpoint}", $part->{real_mntpoint};
- delete $part->{real_mntpoint};
- $part->{isMounted} = 0;
- };
- }
-
- return if $part->{isMounted};
-
- unless ($::testing) {
- if (isSwap($part)) {
- swap::swapon($part->{device});
- } else {
- $part->{mntpoint} or die "missing mount point for partition $part->{device}";
-
- my $mntpoint = ($prefix || '') . $part->{mntpoint};
- if (isLoopback($part) || $part->{encrypt_key}) {
- set_loop($part);
- } elsif (loopback::carryRootLoopback($part)) {
- $mntpoint = "/initrd/loopfs";
- }
- my $dev = $part->{real_device} || $part->{device};
- mount($dev, $mntpoint, type2fs($part), $rdonly, $part->{options});
- rmdir "$mntpoint/lost+found";
- }
- }
- $part->{isMounted} = $part->{isFormatted} = 1; #- assume that if mount works, partition is formatted
-}
-
-sub umount_part {
- my ($part, $prefix) = @_;
-
- $part->{isMounted} || $part->{real_mntpoint} or return;
-
- unless ($::testing) {
- if (isSwap($part)) {
- swap::swapoff($part->{device});
- } elsif (loopback::carryRootLoopback($part)) {
- umount("/initrd/loopfs");
- } else {
- umount(($prefix || '') . $part->{mntpoint} || devices::make($part->{device}));
- devices::del_loop(delete $part->{real_device}) if $part->{real_device};
- }
- }
- $part->{isMounted} = 0;
-}
-
-sub mount_all($;$$) {
- my ($fstab, $prefix) = @_;
-
- #- TODO fsck, create check_mount_all ?
- log::l("mounting all filesystems");
-
- #- order mount by alphabetical ordre, that way / < /home < /home/httpd...
- foreach (sort { $a->{mntpoint} cmp $b->{mntpoint} } grep { isSwap($_) || $_->{mntpoint} && isTrueFS($_) } @$fstab) {
- mount_part($_, $prefix);
- }
-}
-
-sub umount_all($;$) {
- my ($fstab, $prefix) = @_;
-
- log::l("unmounting all filesystems");
-
- foreach (sort { $b->{mntpoint} cmp $a->{mntpoint} } @$fstab) {
- $_->{mntpoint} and umount_part($_, $prefix);
- }
-}
-
-################################################################################
-# various functions
-################################################################################
-sub df {
- my ($part, $prefix) = @_;
- my $dir = "/tmp/tmp_fs_df";
-
- return $part->{free} if exists $part->{free};
-
- if ($part->{isMounted}) {
- $dir = ($prefix || '') . $part->{mntpoint};
- } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
- return; #- won't even try!
- } else {
- mkdir $dir;
- eval { mount($part->{device}, $dir, type2fs($part), 'readonly') };
- if ($@) {
- $part->{notFormatted} = 1;
- $part->{isFormatted} = 0;
- unlink $dir;
- return;
- }
- }
- my (undef, $free) = MDK::Common::System::df($dir);
-
- if (!$part->{isMounted}) {
- umount($dir);
- unlink($dir)
- }
-
- $part->{free} = 2 * $free if defined $free;
- $part->{free};
-}
-
-sub up_mount_point {
- my ($mntpoint, $fstab) = @_;
- while (1) {
- $mntpoint = dirname($mntpoint);
- $mntpoint ne "." or return;
- $_->{mntpoint} eq $mntpoint and return $_ foreach @$fstab;
- }
-}
-
-1;
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
deleted file mode 100644
index 5b700d387..000000000
--- a/perl-install/fsedit.pm
+++ /dev/null
@@ -1,741 +0,0 @@
-package fsedit; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%suggestions);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use fsedit;
-use devices;
-use loopback;
-use log;
-use fs;
-
-%suggestions = (
- __("simple") => [
- { mntpoint => "/", size => 300 << 11, type =>0x483, ratio => 5, maxsize =>3500 << 11 },
- { mntpoint => "swap", size => 64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
- { mntpoint => "/home", size => 300 << 11, type =>0x483, ratio => 3 },
- ], __("with /usr") => [
- { mntpoint => "/", size => 150 << 11, type =>0x483, ratio => 1, maxsize => 500 << 11 },
- { mntpoint => "swap", size => 64 << 11, type => 0x82, ratio => 1, maxsize => 250 << 11 },
- { mntpoint => "/usr", size => 300 << 11, type =>0x483, ratio => 4, maxsize =>3000 << 11 },
- { mntpoint => "/home", size => 100 << 11, type =>0x483, ratio => 5 },
- ], __("server") => [
- { mntpoint => "/", size => 150 << 11, type =>0x483, ratio => 1, maxsize => 250 << 11 },
- { mntpoint => "swap", size => 64 << 11, type => 0x82, ratio => 2, maxsize => 400 << 11 },
- { mntpoint => "/usr", size => 300 << 11, type =>0x483, ratio => 3, maxsize =>3000 << 11 },
- { mntpoint => "/var", size => 100 << 11, type =>0x483, ratio => 4 },
- { mntpoint => "/home", size => 100 << 11, type =>0x483, ratio => 5 },
- ],
-);
-foreach (values %suggestions) {
- if (arch() =~ /ia64/) {
- @$_ = ({ mntpoint => "/boot/efi", size => 50 << 11, type => 0xb, ratio => 1, maxsize => 150 << 11 }, @$_);
- }
-}
-
-my @suggestions_mntpoints = (
- "/var/ftp", "/var/www", "/boot", '/tmp',
- arch() =~ /sparc/ ? "/mnt/sunos" : arch() =~ /ppc/ ? "/mnt/macos" : "/mnt/windows",
- #- RedHat also has /usr/local and /opt
-);
-
-my @partitions_signatures = (
- [ 0x8e, 0, "HM\1\0" ],
- [ 0x83, 0x438, "\x53\xEF" ],
- [ 0x183, 0x10034, "ReIsErFs" ],
- [ 0x183, 0x10034, "ReIsEr2Fs" ],
- [ 0x283, 0, 'XFSB', 0x200, 'XAGF', 0x400, 'XAGI' ],
- [ 0x383, 0x8000, 'JFS1' ],
- [ 0x82, 4086, "SWAP-SPACE" ],
- [ 0x82, 4086, "SWAPSPACE2" ],
- [ 0x7, 0x1FE, "\x55\xAA", 0x3, "NTFS" ],
- [ 0xc, 0x1FE, "\x55\xAA", 0x52, "FAT32" ],
-arch() !~ /^sparc/ ? (
- [ 0x6, 0x1FE, "\x55\xAA", 0x36, "FAT" ],
-) : (),
-);
-
-sub typeOfPart {
- my $dev = devices::make($_[0]);
- my $t = typeFromMagic($dev, @partitions_signatures);
- if ($t == 0x83) {
- #- there is no magic to differentiate ext3 and ext2. Using libext2fs
- #- to check if it has a journal
- $t = 0x483 if c::is_ext3($dev);
- }
- $t;
-}
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub empty_all_hds {
- { hds => [], lvms => [], raids => [], loopbacks => [], raw_hds => [], nfss => [], smbs => [], special => [] };
-}
-sub recompute_loopbacks {
- my ($all_hds) = @_;
- my @fstab = get_all_fstab($all_hds);
- @{$all_hds->{loopbacks}} = map { isPartOfLoopback($_) ? @{$_->{loopback}} : () } @fstab;
-}
-
-sub raids {
- my ($hds) = @_;
-
- my @parts = get_fstab(@$hds);
- {
- my @l = grep { isRawRAID($_) } @parts or return [];
- detect_devices::raidAutoStart(@l);
- }
-
- fs::get_major_minor(@parts);
- my %devname2part = map { $_->{dev} => { %$_, device => $_->{dev} } } read_partitions();
-
- my @raids;
- my @mdstat = cat_("/proc/mdstat");
- for (my $i = 0; $i < @mdstat; $i++) {
-
- my ($nb, $level, $mdparts) =
- #- line format is:
- #- md%d : {in}?active{ (read-only)}? {linear|raid1|raid4|raid5}{ DEVNAME[%d]{(F)}?}*
- $mdstat[$i] =~ /^md(.).* ([^ \[\]]+) (\S+\[\d+\].*)/ or next;
-
- $level =~ s/raid//; #- { linear | raid0 | raid1 | raid5 } -> { linear | 0 | 1 | 5 }
-
- my $chunks = $mdstat[$i+1] =~ /(\S+) chunks/ ? $1 : "64k";
-
- my @raw_mdparts = map { /([^\[]+)/ } split ' ', $mdparts;
- my @mdparts =
- map {
- my $mdpart = $devname2part{$_} || { device => $_ };
- if (my ($part) = grep { is_same_hd($mdpart, $_) } @parts) {
- $part->{raid} = $nb;
- delete $part->{mntpoint};
- $part;
- } else {
- #- forget it when not found? that way it won't break much... beurk.
- ();
- }
- } @raw_mdparts;
-
- my $type = typeOfPart("md$nb");
- log::l("RAID: found md$nb (raid $level) chunks $chunks ", if_($type, "type $type "), "with parts ", join(", ", @raw_mdparts));
- $raids[$nb] = { 'chunk-size' => $chunks, type => $type || 0x83, disks => \@mdparts,
- device => "md$nb", notFormatted => !$type, level => $level };
- }
- require raid;
- raid::update(@raids);
- \@raids;
-}
-
-sub hds {
- my ($drives, $flags) = @_;
- my (@hds);
- my $rc;
-
- foreach (@$drives) {
- my $file = devices::make($_->{device});
-
- my $hd = partition_table_raw::get_geometry($file) or log::l("An error occurred while getting the geometry of block device $file: $!"), next;
- add2hash_($hd, $_);
- $hd->{file} = $file;
- $hd->{prefix} = $hd->{device};
- # for RAID arrays of format c0d0p1
- $hd->{prefix} .= "p" if $hd->{prefix} =~ m,(rd|ida|cciss|ataraid)/,;
-
- eval { partition_table::read($hd, $flags->{clearall} || member($_->{device}, @{$flags->{clear} || []})) };
- if ($@) {
- cdie "ask_before_blanking:$@";
- partition_table_raw::zero_MBR($hd);
- }
- member($_->{device}, @{$flags->{clear} || []}) and partition_table::remove($hd, $_)
- foreach partition_table::get_normal_parts($hd);
-
- # special case for Various type
- $_->{type} = typeOfPart($_->{device}) || 0x100 foreach grep { $_->{type} == 0x100 } partition_table::get_normal_parts($hd);
-
- #- special case for type overloading (eg: reiserfs is 0x183)
- foreach (grep { isExt2($_) } partition_table::get_normal_parts($hd)) {
- my $type = typeOfPart($_->{device});
- $_->{type} = $type if $type > 0x100 || $type && $hd->isa('partition_table_gpt');
- }
- push @hds, $hd;
- }
- #- detect raids before LVM allowing LVM on raid
- my $raids = raids(\@hds);
- my $all_hds = { %{ empty_all_hds() }, hds => \@hds, lvms => [], raids => $raids };
-
- my @lvms;
- if (my @pvs = grep { isRawLVM($_) } get_all_fstab($all_hds)) {
- #- otherwise vgscan won't find them
- devices::make($_->{device}) foreach @pvs;
- require lvm;
- foreach (@pvs) {
- my $name = lvm::get_vg($_) or next;
- my ($lvm) = grep { $_->{LVMname} eq $name } @lvms;
- if (!$lvm) {
- $lvm = bless { disks => [], LVMname => $name }, 'lvm';
- lvm::update_size($lvm);
- lvm::get_lvs($lvm);
- push @lvms, $lvm;
- }
- $_->{lvm} = $name;
- push @{$lvm->{disks}}, $_;
- }
- }
- $all_hds->{lvms} = \@lvms;
-
- fs::get_major_minor(get_all_fstab($all_hds));
-
- $all_hds;
-}
-
-
-sub read_partitions() {
- my (undef, undef, @all) = cat_("/proc/partitions");
- grep {
- $_->{size} != 1 && # skip main extended partition
- $_->{size} != 0x3fffffff # skip cdroms (otherwise stops cd-audios)
- } map {
- my %l;
- @l{qw(major minor size dev)} = split;
- \%l;
- } @all;
-}
-
-sub readProcPartitions {
- my ($hds) = @_;
-
- my @all = read_partitions();
- my @parts = grep { $_->{dev} =~ /\d$/ } @all;
- my @disks = grep { $_->{dev} !~ /\d$/ } @all;
-
- my $devfs_like = grep { $_->{dev} =~ m|/disc$| } @disks;
-
- my %devfs2normal = map {
- my (undef, $major, $minor) = devices::entry($_->{device});
- my ($disk) = grep { $_->{major} == $major && $_->{minor} == $minor } @disks;
- $disk->{dev} => $_->{device};
- } @$hds;
-
- foreach my $part (@parts) {
- my $dev;
- if ($devfs_like) {
- $dev = -e "/dev/$part->{dev}" ? $part->{dev} : sprintf("0x%x%02x", $part->{major}, $part->{minor});
- $part->{rootDevice} = $devfs2normal{dirname($part->{dev}) . '/disc'};
- } else {
- $dev = $part->{dev};
- foreach my $hd (@$hds) {
- $part->{rootDevice} = $hd->{device} if $part->{dev} =~ /^$hd->{device}./;
- }
- }
- $part->{device} = $dev;
- $part->{start} = 0; # unknown, but we don't care
- $part->{size} *= 2; # from KB to sectors
- $part->{type} = typeOfPart($dev);
-
- delete $part->{dev}; # cleanup
- }
- @parts;
-}
-
-sub all_hds {
- my ($all_hds) = @_;
- (@{$all_hds->{hds}}, @{$all_hds->{lvms}});
-}
-sub part2hd {
- my ($part, $all_hds) = @_;
- my ($hd) = grep { $part->{rootDevice} eq $_->{device} } all_hds($all_hds);
- $hd;
-}
-
-sub is_same_hd {
- my ($hd1, $hd2) = @_;
- if ($hd1->{major} && $hd2->{major}) {
- $hd1->{major} == $hd2->{major} && $hd1->{minor} == $hd2->{minor};
- } else {
- $hd1->{device} eq $hd2->{device};
- }
-}
-
-sub is_same_part {
- my ($part1, $part2) = @_;
- foreach ('start', 'size', 'type', 'rootDevice') {
- $part1->{$_} eq $part2->{$_} or return;
- }
- 1;
-}
-
-#- get all normal partition including special ones as found on sparc.
-sub get_fstab {
- map { partition_table::get_normal_parts($_) } @_;
-}
-
-#- get normal partition that should be visible for working on.
-sub get_visible_fstab {
- grep { $_ && !partition_table::isWholedisk($_) && !partition_table::isHiddenMacPart($_) }
- map { partition_table::get_normal_parts($_) } @_;
-}
-
-sub get_fstab_and_holes {
- map {
- if (isLVM($_)) {
- my @parts = partition_table::get_normal_parts($_);
- my $free = $_->{totalsectors} - sum map { $_->{size} } @parts;
- my $free_part = { start => 0, size => $free, type => 0, rootDevice => $_->{device} };
- @parts, if_($free >= $_->cylinder_size, $free_part);
- } else {
- partition_table::get_normal_parts_and_holes($_);
- }
- } @_;
-}
-sub get_holes {
- grep { $_->{type} == 0 } get_fstab_and_holes(@_);
-}
-
-sub get_all_fstab {
- my ($all_hds) = @_;
- my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
- my @raids = grep {$_} @{$all_hds->{raids}};
- @parts, @raids, @{$all_hds->{loopbacks}};
-}
-sub get_really_all_fstab {
- my ($all_hds) = @_;
- my @parts = map { partition_table::get_normal_parts($_) } all_hds($all_hds);
- my @raids = grep {$_} @{$all_hds->{raids}};
- @parts, @raids, @{$all_hds->{loopbacks}}, @{$all_hds->{raw_hds}}, @{$all_hds->{nfss}}, @{$all_hds->{smbs}};
-}
-sub get_all_fstab_and_holes {
- my ($all_hds) = @_;
- my @raids = grep {$_} @{$all_hds->{raids}};
- get_fstab_and_holes(all_hds($all_hds)), @raids, @{$all_hds->{loopbacks}};
-}
-sub get_all_holes {
- my ($all_hds) = @_;
- grep { $_->{type} == 0 } get_all_fstab_and_holes($all_hds);
-}
-
-sub all_free_space {
- my ($all_hds) = @_;
- sum map { $_->{size} } get_all_holes($all_hds);
-}
-sub free_space {
- sum map { $_->{size} } get_holes(@_);
-}
-
-sub is_one_big_fat {
- my ($hds) = @_;
- @$hds == 1 or return;
-
- my @l = get_fstab(@$hds);
- @l == 1 && isFat($l[0]) && free_space(@$hds) < 10 << 11;
-}
-
-sub file2part {
- my ($prefix, $fstab, $file, $keep_simple_symlinks) = @_;
- my $part;
-
- $file = $keep_simple_symlinks ? common::expand_symlinks_but_simple("$prefix$file") : expand_symlinks("$prefix$file");
- unless ($file =~ s/^$prefix//) {
- my ($part) = grep { loopback::carryRootLoopback($_) } @$fstab or die;
- log::l("found $part->{mntpoint}");
- $file =~ s|/initrd/loopfs|$part->{mntpoint}|;
- }
- foreach (@$fstab) {
- my $m = $_->{mntpoint};
- $part = $_ if
- $file =~ /^\Q$m/ &&
- (!$part || length $part->{mntpoint} < length $m);
- }
- $part or die "file2part: not found $file";
- $file =~ s|$part->{mntpoint}/?|/|;
- ($part, $file);
-}
-
-
-sub computeSize {
- my ($part, $best, $all_hds, $suggestions) = @_;
- my $max = $part->{maxsize} || $part->{size};
- return min($max, $best->{size}) unless $best->{ratio};
-
- my $free_space = all_free_space($all_hds);
- my @l = my @L = grep {
- if (!has_mntpoint($_->{mntpoint}, $all_hds) && $free_space >= $_->{size}) {
- $free_space -= $_->{size};
- 1;
- } else { 0 } } @$suggestions;
-
- my $tot_ratios = 0;
- while (1) {
- my $old_free_space = $free_space;
- my $old_tot_ratios = $tot_ratios;
-
- $tot_ratios = sum(map { $_->{ratio} } @l);
- last if $tot_ratios == $old_tot_ratios;
-
- @l = grep {
- if ($_->{ratio} && $_->{maxsize} && $tot_ratios &&
- $_->{size} + $_->{ratio} / $tot_ratios * $old_free_space >= $_->{maxsize}) {
- return min($max, $best->{maxsize}) if $best->{mntpoint} eq $_->{mntpoint};
- $free_space -= $_->{maxsize} - $_->{size};
- 0;
- } else {
- $_->{ratio};
- }
- } @l;
- }
- my $size = int min($max, $best->{size} + $free_space * ($tot_ratios && $best->{ratio} / $tot_ratios));
- #- verify other entry can fill the hole
- if (grep { $_->{size} < $max - $size } @L) { $size } else { $max }
-}
-
-sub suggest_part {
- my ($part, $all_hds, $suggestions) = @_;
- $suggestions ||= $suggestions{server} || $suggestions{simple};
-
- my $has_swap = grep { isSwap($_) } get_all_fstab($all_hds);
-
- my ($best, $second) =
- grep { !$_->{maxsize} || $part->{size} <= $_->{maxsize} }
- grep { $_->{size} <= ($part->{maxsize} || $part->{size}) }
- grep { !has_mntpoint($_->{mntpoint}, $all_hds) || isSwap($_) && !$has_swap }
- grep { !$_->{hd} || $_->{hd} eq $part->{rootDevice} }
- grep { !$part->{type} || $part->{type} == $_->{type} || isTrueFS($part) && isTrueFS($_) }
- @$suggestions or return;
-
-#- if (arch() =~ /i.86/) {
-#- $best = $second if
-#- $best->{mntpoint} eq '/boot' &&
-#- $part->{start} + $best->{size} > 1024 * $hd->cylinder_size(); #- if the empty slot is beyond the 1024th cylinder, no use having /boot
-#- }
-
- defined $best or return; #- sorry no suggestion :(
-
- $part->{mntpoint} = $best->{mntpoint};
- $part->{type} = $best->{type} if !(isTrueFS($best) && isTrueFS($part));
- $part->{size} = computeSize($part, $best, $all_hds, $suggestions);
- $part->{options} = $best->{options} if $best->{options};
- 1;
-}
-
-sub suggestions_mntpoint {
- my ($all_hds) = @_;
- sort grep { !/swap/ && !has_mntpoint($_, $all_hds) }
- (@suggestions_mntpoints, map { $_->{mntpoint} } @{$suggestions{server} || $suggestions{simple}});
-}
-
-#-sub partitionDrives {
-#-
-#- my $cmd = "/sbin/fdisk";
-#- -x $cmd or $cmd = "/usr/bin/fdisk";
-#-
-#- my $drives = findDrivesPresent() or die "You don't have any hard drives available! You probably forgot to configure a SCSI controller.";
-#-
-#- foreach (@$drives) {
-#- my $text = "/dev/" . $_->{device};
-#- $text .= " - SCSI ID " . $_->{id} if $_->{device} =~ /^sd/;
-#- $text .= " - Model " . $_->{info};
-#- $text .= " array" if $_->{device} =~ /^c.d/;
-#-
-#- #- truncate at 50 columns for now
-#- $text = substr $text, 0, 50;
-#- }
-#- #-TODO TODO
-#-}
-
-
-sub mntpoint2part {
- my ($mntpoint, $fstab) = @_;
- first(grep { $mntpoint eq $_->{mntpoint} } @$fstab);
-}
-sub has_mntpoint {
- my ($mntpoint, $all_hds) = @_;
- mntpoint2part($mntpoint, [ get_really_all_fstab($all_hds) ]);
-}
-sub get_root_ {
- my ($fstab, $boot) = @_;
- $boot && mntpoint2part("/boot", $fstab) || mntpoint2part("/", $fstab);
-}
-sub get_root { &get_root_ || {} }
-
-#- do this before modifying $part->{type}
-sub check_type {
- my ($type, $hd, $part) = @_;
- isThisFs("jfs", { type => $type }) && $part->{size} < 16 << 11 and die _("You can't use JFS for partitions smaller than 16MB");
- isThisFs("reiserfs", { type => $type }) && $part->{size} < 32 << 11 and die _("You can't use ReiserFS for partitions smaller than 32MB");
-}
-
-sub package_needed_for_partition_type {
- my ($part) = @_;
- my %l = (
- reiserfs => 'reiserfsprogs',
- xfs => 'xfsprogs',
- jfs => 'jfsprogs',
- );
- $l{type2fs($part)};
-}
-
-#- do this before modifying $part->{mntpoint}
-#- $part->{mntpoint} should not be used here, use $mntpoint instead
-sub check_mntpoint {
- my ($mntpoint, $hd, $part, $all_hds) = @_;
-
- $mntpoint eq '' || isSwap($part) || isNonMountable($part) and return;
- $mntpoint =~ m|^/| or die _("Mount points must begin with a leading /");
- $mntpoint ne $part->{mntpoint} && has_mntpoint($mntpoint, $all_hds) and die _("There is already a partition with mount point %s\n", $mntpoint);
-
- die "raid / with no /boot"
- if $mntpoint eq "/" && isRAID($part) && !has_mntpoint("/boot", $all_hds);
- die _("You can't use a LVM Logical Volume for mount point %s", $mntpoint)
- if ($mntpoint eq '/' || $mntpoint eq '/boot') && isLVM($hd);
- die _("This directory should remain within the root filesystem")
- if member($mntpoint, qw(/bin /dev /etc /lib /sbin /root /mnt));
- die _("You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n")
- if !isTrueFS($part) && member($mntpoint, qw(/ /home /tmp /usr /var));
- die _("You can't use an encrypted file system for mount point %s", $mntpoint)
- if $part->{options} =~ /encrypted/ && member($mntpoint, qw(/ /usr /var));
-
- local $part->{mntpoint} = $mntpoint;
- loopback::check_circular_mounts($hd, $part, $all_hds);
-}
-
-sub check {
- my ($hd, $part, $all_hds) = @_;
- check_mntpoint($part->{mntpoint}, $hd, $part, $all_hds);
- check_type($part->{type}, $hd, $part);
-}
-
-sub add {
- my ($hd, $part, $all_hds, $options) = @_;
-
- isSwap($part) ?
- ($part->{mntpoint} = 'swap') :
- $options->{force} || check_mntpoint($part->{mntpoint}, $hd, $part, $all_hds);
-
- delete $part->{maxsize};
-
- if (isLVM($hd)) {
- lvm::lv_create($hd, $part);
- } else {
- partition_table::add($hd, $part, $options->{primaryOrExtended});
- }
-}
-
-sub allocatePartitions {
- my ($all_hds, $to_add) = @_;
-
- foreach my $part (get_all_holes($all_hds)) {
- my ($start, $size, $dev) = @$part{"start", "size", "rootDevice"};
- my $part;
- while (suggest_part($part = { start => $start, size => 0, maxsize => $size, rootDevice => $dev },
- $all_hds, $to_add)) {
- my ($hd) = fsedit::part2hd($part, $all_hds);
- add($hd, $part, $all_hds);
- $size -= $part->{size} + $part->{start} - $start;
- $start = $part->{start} + $part->{size};
- }
- }
-}
-
-sub auto_allocate {
- my ($all_hds, $suggestions) = @_;
- my $before = listlength(fsedit::get_all_fstab($all_hds));
-
- my $suggestions_ = $suggestions || $suggestions{simple};
- allocatePartitions($all_hds, $suggestions_);
- auto_allocate_raids($all_hds, $suggestions) if $suggestions;
-
- partition_table::assign_device_numbers($_) foreach @{$all_hds->{hds}};
-
- if ($before == listlength(fsedit::get_all_fstab($all_hds))) {
- # find out why auto_allocate failed
- if (my @l = grep { !has_mntpoint($_->{mntpoint}, $all_hds) } @$suggestions_) {
- die _("Not enough free space for auto-allocating");
- } else {
- die _("Nothing to do");
- }
- }
-}
-
-sub auto_allocate_raids {
- my ($all_hds, $suggestions) = @_;
-
- my @raids = grep { isRawRAID($_) } get_all_fstab($all_hds) or return;
- if (@raids) {
- require raid;
- my @mds = grep { $_->{hd} =~ /md/ } @$suggestions;
- foreach my $md (@mds) {
- my @raids_ = grep { !$md->{parts} || $md->{parts} =~ /\Q$_->{mntpoint}/ } @raids;
- @raids = difference2(\@raids, \@raids_);
- my $nb = raid::new($all_hds->{raids}, @raids_);
- my $part = $all_hds->{raids}[$nb];
-
- my %h = %$md;
- delete @h{'hd', 'parts'};
- put_in_hash($part, \%h); # mntpoint, level, chunk-size, type
- raid::updateSize($part);
- }
- }
-}
-
-sub undo_prepare {
- my ($all_hds) = @_;
- require Data::Dumper;
- $Data::Dumper::Purity = 1;
- foreach (@{$all_hds->{hds}}) {
- my @h = @{$_}{@partition_table::fields2save};
- push @{$_->{undo}}, Data::Dumper->Dump([\@h], ['$h']);
- }
-}
-sub undo {
- my ($all_hds) = @_;
- foreach (@{$all_hds->{hds}}) {
- my $h; eval pop @{$_->{undo}} || next;
- @{$_}{@partition_table::fields2save} = @$h;
-
- $_->{isDirty} = $_->{needKernelReread} = 1 if $_->{hasBeenDirty};
- }
-
-}
-
-sub move {
- my ($hd, $part, $hd2, $sector2) = @_;
-
- die 'TODO'; # doesn't work for the moment
- my $part1 = { %$part };
- my $part2 = { %$part };
- $part2->{start} = $sector2;
- $part2->{size} += $hd2->cylinder_size() - 1;
- partition_table::remove($hd, $part);
- {
- local ($part2->{notFormatted}, $part2->{isFormatted}); #- do not allow partition::add to change this
- partition_table::add($hd2, $part2);
- }
-
- return if $part2->{notFormatted} && !$part2->{isFormatted} || $::testing;
-
- local (*F, *G);
- sysopen F, $hd->{file}, 0 or die '';
- sysopen G, $hd2->{file}, 2 or die _("Error opening %s for writing: %s", $hd2->{file}, "$!");
-
- my $base = $part1->{start};
- my $base2 = $part2->{start};
- my $step = 10;
- if ($hd eq $hd2) {
- $base == $base2 and return;
- $step = min($step, abs($base2 - $base));
-
- if ($base < $base2) {
- $base += $part1->{size} - $step;
- $base2 += $part1->{size} - $step;
- $step = -$step;
- }
- }
-
- my $f = sub {
- $base < 0 and $base2 += -$base, $base = 0;
- $base2 < 0 and $base += -$base2, $base2 = 0;
- c::lseek_sector(fileno(F), $base, 0) or die "seeking to sector $base failed on drive $hd->{device}";
- c::lseek_sector(fileno(G), $base2, 0) or die "seeking to sector $base2 failed on drive $hd2->{device}";
-
- my $buf;
- sysread F, $buf, $SECTORSIZE * abs($_[0]) or die '';
- syswrite G, $buf;
- };
-
- for (my $i = 0; $i < $part1->{size} / abs($step); $i++, $base += $step, $base2 += $step) {
- print "$base $base2\n";
- &$f($step);
- }
- if (my $v = ($part1->{size} % abs($step)) * sign($step)) {
- $base += $v;
- $base2 += $v;
- &$f($v);
- }
-}
-
-sub change_type {
- my ($type, $hd, $part) = @_;
- $type != $part->{type} or return;
- check_type($type, $hd, $part);
- $hd->{isDirty} = 1;
- $part->{mntpoint} = '' if isSwap($part) && $part->{mntpoint} eq "swap";
- $part->{mntpoint} = '' if isRawLVM({ type => $type }) || isRawRAID({ type => $type });
- $part->{type} = $type;
- $part->{notFormatted} = 1;
- $part->{isFormatted} = 0;
-}
-
-sub rescuept($) {
- my ($hd) = @_;
- my ($ext, @hd);
-
- my $dev = devices::make($hd->{device});
- local *F; open F, "rescuept $dev|";
- local $_;
- while (<F>) {
- my ($st, $si, $id) = /start=\s*(\d+),\s*size=\s*(\d+),\s*Id=\s*(\d+)/ or next;
- my $part = { start => $st, size => $si, type => hex($id) };
- if (isExtended($part)) {
- $ext = $part;
- } else {
- push @hd, $part;
- }
- }
- close F or die "rescuept failed";
-
- partition_table_raw::zero_MBR($hd);
- foreach (@hd) {
- my $b = partition_table::verifyInside($_, $ext);
- if ($b) {
- $_->{start}--;
- $_->{size}++;
- }
- local $_->{notFormatted};
-
- partition_table::add($hd, $_, ($b ? 'Extended' : 'Primary'), 1);
- }
-}
-
-sub verifyHds {
- my ($hds, $readonly, $ok) = @_;
-
- if (is_empty_array_ref($hds)) { #- no way
- die _("An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem");
- }
-
- my @parts = readProcPartitions($hds);
- foreach my $hd (@$hds) {
- my @l1 = partition_table::get_normal_parts($hd);
- my @l2 = grep { $_->{rootDevice} eq $hd->{device} } @parts;
- if (int(@l1) != int(@l2) && arch() ne 'ppc') {
- log::l(sprintf
- "/proc/partitions doesn't agree with drakx %d != %d:\n%s\n", int(@l1), int(@l2),
- "/proc/partitions: " . join(", ", map { "$_->{device} ($_->{rootDevice})" } @parts));
- $ok = 0;
- }
- }
-
- if ($readonly && !$ok) {
- log::l("using /proc/partitions as diskdrake failed :(");
- foreach my $hd (@$hds) {
- partition_table_raw::zero_MBR($hd);
- $hd->{primary} = { normal => [ grep { $hd->{device} eq $_->{rootDevice} } @parts ] };
- }
- $ok = 1;
- }
- $readonly && get_fstab(@$hds) == 0 and die _("You don't have any partitions!");
- $ok;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/ftp.pm b/perl-install/ftp.pm
deleted file mode 100644
index c84ce66a6..000000000
--- a/perl-install/ftp.pm
+++ /dev/null
@@ -1,86 +0,0 @@
-package ftp; # $Id$
-
-use Net::FTP;
-
-use network;
-use log;
-
-my %hosts;
-
-1;
-
-sub fromEnv() {
- #- now URLPREFIX is generated from what is given by mdk-stage1 which is only this 4 variables.
- $ENV{URLPREFIX} = "ftp://" . ($ENV{LOGIN} && ("$ENV{LOGIN}" . ($ENV{PASSWORD} && ":$ENV{PASSWORD}") . '@')) .
- "$ENV{HOST}/$ENV{PREFIX}";
- @ENV{qw(HOST PREFIX LOGIN PASSWORD)};
-}
-
-sub new {
- my ($host, $prefix, $login, $password) = @_;
- my @l = do { if ($hosts{"$host$prefix"}) {
- @{$hosts{"$host$prefix"}};
- } else {
- my %options = (Passive => 1, Timeout => 60, Port => 21);
- $options{Firewall} = $ENV{PROXY} if $ENV{PROXY};
- $options{Port} = $ENV{PROXYPORT} if $ENV{PROXYPORT};
- unless ($login) {
- $login = 'anonymous';
- $password = '-drakx@';
- }
-
- my $ftp;
- foreach (1..10) {
- $ftp = Net::FTP->new(network::resolv($host), %options) or die;
- $ftp && $ftp->login($login, $password) and last;
-
- log::l("ftp login failed, sleeping before trying again");
- sleep 5 * $_;
- }
- $ftp or die "unable to open ftp connection to $host";
- $ftp->binary;
- $ftp->cwd($prefix);
-
- my @l = ($ftp, \ (my $retr = undef));
- $hosts{"$host$prefix"} = \@l;
- @l;
- }};
- wantarray ? @l : $l[0];
-}
-
-sub getFile {
- my ($f, @para) = @_;
- $f eq 'XXX' and rewindGetFile(), return; #- special case to force closing connection.
- foreach (1..3) {
- my ($ftp, $retr) = new(@para ? @para : fromEnv);
- eval { $$retr->close if $$retr };
- $@ and rewindGetFile(); #- in case Timeout got us on "->close"
- $$retr = $ftp->retr($f) and return $$retr;
- ($ftp->code == 550) and log::l("FTP: 550 file unavailable"), return;
- rewindGetFile();
- log::l("ftp get failed, sleeping before trying again");
- sleep 1;
- }
-}
-
-#-sub closeFiles() {
-#- #- close any existing connections
-#- foreach (values %hosts) {
-#- my $retr = $_->[1] if ref $_;
-#- $$retr->close if $$retr;
-#- undef $$retr;
-#- }
-#-}
-
-sub rewindGetFile() {
- #- close any existing connection.
- foreach (values %hosts) {
- my ($ftp, $retr) = @{$_ || []};
- #- don't let Timeout kill us!
- eval { $$retr->close } if $$retr;
- eval { $ftp->close } if $ftp;
- }
-
- #- make sure to reconnect to server.
- %hosts = ();
-}
diff --git a/perl-install/g_auto_install b/perl-install/g_auto_install
deleted file mode 100755
index dd7655ee5..000000000
--- a/perl-install/g_auto_install
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/usr/bin/perl
-
-my $dir = `pwd`;
-chomp $dir;
-$dir .= "/../../..";
-
-#- avoid polluting environment with specific locales.
-delete $ENV{$_} foreach qw(LC_MONETARY LC_CTYPE LC_NUMERIC LC_MESSAGES LC_TIME LC_COLLATE LANGUAGE LANG RPM_INSTALL_LANG);
-
-if ($ENV{DISPLAY}) {
- system "xset", "+fp", "$dir/usr/X11R6/lib/X11/fonts/";
- system "xset", "fp", "rehash";
-}
-
-#- perl version of the install, we use directly the version we found,
-#- this means there SHOULD BE no module compiled for an older version of perl
-#- which will be used by DrakX.
-my ($version, $arch) = (glob "$dir/usr/lib/perl5/*/*/CORE/libperl.so")[0] =~ m|$dir/usr/lib/perl5/([^/]*)/([^/]*)/CORE/libperl.so|;
-
-#- keep it mind the ELF loader to use.
-$ENV{LD_LOADER} = "$dir/lib/ld-linux.so.2";
-
-$ENV{LOCPATH}="$dir/usr/share/locale";
-$ENV{GCONV_PATH}="$dir/usr/lib/gconv";
-$ENV{PERL5LIB} = join ":", map { "$dir/usr/lib/perl5/$_" } ("$version/$arch",
- "$version",
- "site_perl/$version/$arch",
- "site_perl/$version",
- "site_perl");
-$ENV{LD_LIBRARY_PATH} = "$dir/usr/bin:$dir/bin:$dir/sbin:$dir/usr/sbin:$dir/usr/X11R6/bin:$dir/lib:$dir/usr/lib:$dir/usr/lib/perl5/$version/$arch/CORE";
-$ENV{PATH} = join(":", map { "$dir/$_" } split ":", "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin") . ":$ENV{PATH}";
-$ENV{SHARE_PATH} = "$dir/usr/share";
-$ENV{RPMRC_FILE} = "$dir/usr/lib/rpm/rpmrc";
-$ENV{GTK_DATA_PREFIX} = "$dir/usr";
-$ENV{GTK_EXE_PREFIX} = "$dir/usr";
-$ENV{GDK_IMLIB_PATH} = "$dir/usr/lib";
-
-system $ENV{LD_LOADER}, "../perl", "./install2", "--g_auto_install", @ARGV;
-
-#- at this point, unwind above else they will not run correctly (wrong ld-linux.so.2)
-delete $ENV{GTK_EXE_PREFIX};
-delete $ENV{RPMRC_FILE};
-delete $ENV{LOCPATH};
-delete $ENV{SHARE_PATH};
-delete $ENV{PATH};
-delete $ENV{LD_LIBRARY_PATH};
-delete $ENV{PERL5LIB};
-delete $ENV{LD_LOADER};
-
-if ($ENV{DISPLAY}) {
- system "xset", "-fp", "$dir/usr/X11R6/lib/X11/fonts/";
- system "xset", "fp", "rehash";
-}
diff --git a/perl-install/harddrake/TODO b/perl-install/harddrake/TODO
deleted file mode 100644
index 324b4b2d1..000000000
--- a/perl-install/harddrake/TODO
+++ /dev/null
@@ -1,169 +0,0 @@
--*- outline -*-
-
-* Harddrake TODO:
-** fixes
-*** IDE, SCSI: bus => bus_id, bus="IDE/SCSI" => move into DrakX
-*** SCSI: get vendor string
-*** timeout on dialogs in service
-*** mouse.pm: only probe serial if :
-**** serial mouse previously detected
-**** no non-serial mouse found
-
-** wishes
-*** move all drakx tools into just a small one-liner that uses real <tool>.pm
- so that harddrake and mcc reduces their memory usage pattern and
- be faster (the next fast step will be to use perl6/parrot)
-*** non needed stuff to run X must be posponed after X11 startup
-**** eg: scanner/audio/printer/floppy/cdrom/tape/tv/webcam/joystick/ ...
-**** different modes:
-***** neuneu => automatic config in service (ie for mouse/video card/...)
-***** expert => run config tools
-
-*** mode neuneu/expert => automatic/tools
-
-** voir dadou -> interface
-
-** missing
-*** check4modem
-*** config module (module options configuration button) => expert only
-*** mode expert => oui/non (cf dadou)
-*** add updfstab
-*** make all drakx tools a simple one-liner that call right module so that
- harddrake2 and mcc can load these tools without more ram eater
-*** enable the user to force a module (isa, isapnp, ...)
-*** detect pcimcia:
-
- foreach (detect_devices::pcmcia_probe()) {
- printf "m: %-15s t: %-20s d: %-12s d: %s\n",
- $_->{driver}, $_->{type}, $_->{device}, $_->{description}
- }
-
-
-** ensure scannerdrake use is ok (=> yvounet)
-
-* Postponed
-** use fbgtk+2 when booting on fbcon for smoother GUI
-*** pixel, convert perl-GTK to gtk+2 :-)
-
-** for to send a message for unknown hardware to install@mandrakesoft.com
-*** use drakbugreport ?
-
- Subject: [UNKNOW HARDWARE] or a new other ml
- -> do you konw how to configure it under linux ?
- -> description
-
-
-
-* / no hope / useless :
-** Once we've swtiched to perl-5.8, consider doing:
- use Storable;
- retrieve %oldconfig
- store %config, $previous_conf;
-
-** enable a string to be passed as detector; in that case, do ourself the =~
-** alter detect_devices in order to only probe one time
-** detect *ALL* mouses if more than one (mousedrake?)
-
-** in Mandrake 9.0 :
-
- "Mass storage" => (Floppy,
- Disk,
- Cdrom,
- Tape)
-
- "Network" => (Ethernetcard,
- Modem,
- Isdn)
- "Multimedia" => (Videocard,
- Tvcard,
- Soundcard,
- Webcam)
- "System" => (Bridge,
- Cpu,
- Memory)
-
-
- "Publishing" => (Printer,
- Scanner)
-
- "Pointing" => (Mouse,
- Joystick)
-
- "Buses" => (Ideinterface,
- Scsiinterface,
- Usbinterface,
- );
-
- "Unknown/Others",
-
-
-* Suggestion
-Subject: Re: [Cooker] Optional ALSA Support for SB Live!
-From: Fabrice FACORAT <f.faber@netcourrier.com>
-To: cooker@linux-mandrake.com
-In-Reply-To: <m2ofhvtpaq.fsf@vador.mandrakesoft.com>
-References: <20020311051222.47DC087CA5@yavin.mandrax.org>
- <m2ofhvtpaq.fsf@vador.mandrakesoft.com>
-Date: 11 Mar 2002 11:12:31 +0100
-Message-Id: <1015841551.3895.31.camel@bastard.localdomain>
-
-Le lun 11/03/2002 ŕ 10:41, Thierry Vignaud a écrit :
-
-> > In Mandrake 8.1 rerunning Harddrake post-setup would switch over
-> > to ALSA (which supports MIDI synth), however in 8.2 the only way to
-> > get ALSA support is to manually edit the modules.conf file. This
-> > would be disasterous for someone who isn't familar with
-> > modules.conf, but had been instructed on the mandrake-expert/newbie
-> > lists (as many had been) to simply rerun Harddrake on the sound card
-> > to get ALSA (and hence MIDI synth support).
->
-> give me the result of lspcidrake -f -v so that i switch your card
-> from oss to alsa.
-
-no please.
-just one month ago you switch SBLive from Alsa to OSS ( cause drakX
-set it as OSS and harddrake as Alsa ).
-There were also a discussion concerning the fact that Alsa doesn't
-support emu-tools and so all available options.
-Last but not least, several peoples report pbs with Alsa ( is sound is
-too high you have disturbances ). So someone is going to ask you for
-OSS as it want to use some features os SBLive, etc ...
-
-To my mind the best way for this ( but too late for 8.2 ) will be to
-have a tool called soundrake. Thanks to this tools, you choose at the
-beginning if you want to use OSS or alsa and then try to correctly
-configure your sound card. This tool should be able to work in
-embended mo in harddrake or harddrake2 ( infos concerning this so long
-awaiting harddrake 2 ? ).
-
-In order to make this tool be a perfect tool, it should be able to
-advice user concerning the advantage and the disadvantage of each
-driver ( indeed alsa sometimes is better than OSS as it support full
-duplex and wave mixing on more sound cards ).
-It's also disturbing is harddrake set alsa by default and XrakX set
-OSS by default as sometimes by lanching harddrake ( just to see what
-happen ) you lose ( or seems to lose ) your sound card ( mute mixer )
-
-For example :
-+ launch harddrake
-+ use autodetection : yes/no
-+ if auto detects enable, it detects a SBLive.
-+ explanations text concerning the fact that :
- if I use OSS I will be able to use sounds effects, live drive and
-others things ( AC-3 passthrough ) thanks to the emu10k1-tools packages
-( available on CD sets and installable via Software Manager )
- if I use Alsa, I won't be able to use emu10k1-tools but at the
-contrary I will be able to use midi software as alsa module support midi
-+ ask user which one he wants to use : OSS / Alsa ?
-+ set the sound card drivers and modules.conf according to user wishes
-+ <mode= dream> if I select OSS, installed emu10k1-tools and provide a
-GUI to configure them </mode = dream>
-+ <mode= dream> if I select Alsa unmute at least PCM and Vol or display
-a warning saying that by default Alsa mute everything ( configure alsa
-service so that it save mixer settings )
-+ test the sound ( mandrake sound theme )
-+ do you hear something ?
-+ yes -> your sound card have been properly set.
-+ if no -> try the others drivers set or send lspcidrake -v to
-somebody@somewhere.org to check for support for your sound card
-+ Do you ahave another sound card ?
diff --git a/perl-install/harddrake/data.pm b/perl-install/harddrake/data.pm
deleted file mode 100644
index bff9c42f8..000000000
--- a/perl-install/harddrake/data.pm
+++ /dev/null
@@ -1,70 +0,0 @@
-package harddrake::data;
-
-use strict;
-use detect_devices;
-use MDK::Common;
-use class_discard;
-
-our (@ISA, @EXPORT_OK) = (qw(Exporter), (qw(version tree)));
-our ($version, $sbindir, $bindir) = ("1.1.5", "/usr/sbin", "/usr/bin");
-
-# Update me each time you handle one more devices class (aka configurator)
-sub unknown {
- grep { $_->{media_type} !~ /tape|DISPLAY|MULTIMEDIA_VIDEO|BRIDGE|NETWORK|MULTIMEDIA_AUDIO/ } detect_devices::probeall(1);
-}
-
-
-# tree format ("CLASS_ID", "type", "type_icon", configurator, detect_sub)
-# NEVER, NEVER alter CLASS_ID or you'll harddrake2 service to detect changes
-# in hw configuration ... :-(
-
-my @devices = detect_devices::probeall(1);
-
-our @tree =
- (
- ["FLOPPY","Floppy", "floppy.png", "",\&detect_devices::floppies],
- ["HARDDISK","Disk", "harddisk.png", "$sbindir/diskdrake", \&detect_devices::hds],
- ["CDROM","Cdrom", "cd.png", "", \&detect_devices::cdroms],
- ["TAPE","Tape", "tape.png", "", \&detect_devices::tapes],
-# ["CDBURNER","Cd burners", "cd.png", "", \&detect_devices::burners],
-
- ["VIDEO","Videocard", "video.png", "$sbindir/XFdrake",
- sub {grep { $_->{driver} =~ /^(Card|Server):/ || $_->{media_type} =~ 'DISPLAY_VGA' } @devices }],
- ["TV","Tvcard", "tv.png", "/usr/bin/XawTV",
- sub {grep { $_->{media_type} =~ 'MULTIMEDIA_VIDEO' } @devices}],
- ["AUDIO","Soundcard", "sound.png", "$bindir/aumix",
- sub {grep { $_->{media_type} =~ 'MULTIMEDIA_AUDIO' } @devices}],
-# "MULTIMEDIA_AUDIO" => "/usr/bin/X11/sounddrake";
- ["WEBCAM","Webcam", "webcam.png", "", sub {}],
- ["ETHERNET","Ethernetcard", "hw_network.png", "$sbindir/draknet", sub {
- #- generic NIC detection for USB seems broken (class, subclass,
- #- protocol report are not accurate) so I'll need to verify against
- #- known drivers :-(
- my @usbnet = qw/CDCEther catc kaweth pegasus usbnet/;
- # should be taken from detect_devices.pm or modules.pm. it's identical
-
- grep { $_->{media_type} =~ /^NETWORK/ || member($_->{driver}, @usbnet) } @devices}],
-# ["","Tokenring cards", "Ethernetcard.png", "", \&detect_devices::getNet],
-# ["","FDDI cards", "Ethernetcard.png", "", \&detect_devices::getNet],
-# ["","Modem", "Modem.png", "", \&detect_devices::getNet],
-# ["","Isdn", "", "", \&detect_devices::getNet]
-
- ["BRIDGE","Bridge", "memory.png", "", sub {grep { $_->{media_type} =~ 'BRIDGE' } @devices}],
-# ["","Cpu", "cpu.png", "", sub {}],
-# ["","Memory", "memory.png", "", sub {}],
- ["UNKNOWN","Unknown/Others", "unknown.png", "" , \&unknown],
-
- ["PRINTER","Printer", "hw_printer.png", "$sbindir/printerdrake",
- sub { require printerdrake; printerdrake::auto_detect(class_discard->new) } ],
- ["SCANNER","Scanner", "scanner.png", "$sbindir/scannerdrake",
- sub { require scanner; scanner::findScannerUsbport() }],
- ["MOUSE","Mouse", "hw_mouse.png", "$sbindir/mousedrake", sub { require mouse; &mouse::detect()}],
- ["JOYSTICK","Joystick", "joystick.png", "", sub {}]
-
-# ["","Ideinterface", "Ideinterface.png", "", "STORAGE_IDE"],
-# ["","Scsiinterface", "Scsiinterface.png", "", \&detect_devices::getSCSI],
-# ["","Usbinterface", "Usbinterface.png", "", \&detect_devices::usb_probe]
- );
-
-
-1;
diff --git a/perl-install/harddrake/ui.pm b/perl-install/harddrake/ui.pm
deleted file mode 100644
index 8c1c84804..000000000
--- a/perl-install/harddrake/ui.pm
+++ /dev/null
Binary files differ
diff --git a/perl-install/help.pm b/perl-install/help.pm
deleted file mode 100644
index 283f4464c..000000000
--- a/perl-install/help.pm
+++ /dev/null
@@ -1,903 +0,0 @@
-package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated
-# from the manuals !!!
-# Write a mail to <documentation@mandrakesoft.com> if
-# you want it changed.
-
-%steps = (
-empty => '',
-
-addUser =>
-__("GNU/Linux is a multiuser system, and this means that each user can have his
-own preferences, his own files and so on. You can read the ``User Guide''
-to learn more. But unlike \"root\", which is the administrator, the users
-you will add here will not be entitled to change anything except their own
-files and their own configuration. You will have to create at least one
-regular user for yourself. That account is where you should log in for
-routine use. Although it is very practical to log in as \"root\" everyday,
-it may also be very dangerous! The slightest mistake could mean that your
-system would not work any more. If you make a serious mistake as a regular
-user, you may only lose some information, but not the entire system.
-
-First, you have to enter your real name. This is not mandatory, of course
-as you can actually enter whatever you want. DrakX will then take the first
-word you have entered in the box and will bring it over to the \"User
-name\". This is the name this particular user will use to log onto the
-system. You can change it. You then have to enter a password here. A
-non-privileged (regular) user's password is not as crucial as \"root\"' one
-from a security point of view, but that is no reason to neglect it: after
-all, your files are at risk.
-
-If you click on \"Accept user\", you can then add as many as you want. Add
-a user for each one of your friends: your father or your sister, for
-example. When you finish adding all the users you want, select \"Done\".
-
-Clicking the \"Advanced\" button allows you to change the default \"shell\"
-for that user (bash by default)."),
-
-ask_mntpoint_s =>
-__("Listed above are the existing Linux partitions detected on your hard drive.
-You can keep the choices made by the wizard, they are good for most common
-installations. If you make any changes, you must at least define a root
-partition (\"/\"). Do not choose too small a partition or you will not be
-able to install enough software. If you want to store your data on a
-separate partition, you will also need to create a partition for \"/home\"
-(only possible if you have more than one Linux partition available).
-
-Each partition is listed as follows: \"Name\", \"Capacity\".
-
-\"Name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc."),
-
-chooseCd =>
-__("The Mandrake Linux installation is spread out over several CD-ROMs. DrakX
-knows if a selected package is located on another CD-ROM and will eject the
-current CD and ask you to insert a different one as required."),
-
-choosePackages =>
-__("It is now time to specify which programs you wish to install on your
-system. There are thousands of packages available for Mandrake Linux, and
-you are not supposed to know them all by heart.
-
-If you are performing a standard installation from a CD-ROM, you will first
-be asked to specify the CDs you currently have (in Expert mode only). Check
-the CD labels and highlight the boxes corresponding to the CDs you have
-available for installation. Click \"OK\" when you are ready to continue.
-
-Packages are sorted in groups corresponding to a particular use of your
-machine. The groups themselves are sorted into four sections:
-
- * \"Workstation\": if you plan to use your machine as a workstation, select
-one or more of the corresponding groups;
-
- * \"Development\": if your machine is to be used for programming, choose
-the desired group(s);
-
- * \"Server\": if your machine is intended to be a server, you will be able
-to select which of the most common services you wish to install on your
-machine;
-
- * \"Graphical Environment\": finally, this is where you will choose your
-preferred graphical environment. At least one must be selected if you want
-to have a graphical workstation!
-
-Moving the mouse cursor over a group name will display a short explanatory
-text about that group. If you deselect all groups when performing a regular
-installation (by opposition to an upgrade), a dialog will pop up proposing
-different options for a minimal installation:
-
- * \"With X\": install the fewer packages possible to have a working
-graphical desktop;
-
- * \"With basic documentation\": installs the base system plus basic
-utilities and their documentation. This installation is suitable for
-setting up a server;
-
- * \"Truly minimal install\": will install the strict minimum necessary to
-get a working Linux system, in command line only. This installation is
-about 65Mb large.
-
-You can check the \"Individual package selection\" box, which is useful if
-you are familiar with the packages being offered or if you want to have
-total control over what will be installed.
-
-If you started the installation in \"Upgrade\" mode, you can unselect all
-groups to avoid installing any new package. This is useful for repairing or
-updating an existing system."),
-
-choosePackagesTree =>
-__("Finally, depending on whether or not you selected individual packages, you
-will be presented a tree containing all packages classified by groups and
-subgroups. While browsing the tree, you can select entire groups,
-subgroups, or individual packages.
-
-Whenever you select a package on the tree, a description appears on the
-right. When your selection is finished, click the \"Install\" button which
-will then launch the installation process. Depending on the speed of your
-hardware and the number of packages that need to be installed, it may take
-a while to complete the process. An estimate of the time it will take to
-install everything is displayed on the screen, to help you gauge if there
-is sufficient time to enjoy a cup of coffee.
-
-!! If a server package has been selected, either intentionally or because
-it was part of a whole group, you will be asked to confirm that you really
-want those servers to be installed. Under Mandrake Linux, any installed
-servers are started by default at boot time. Even if they are safe and have
-no known issues at the time the distribution was shipped, it may happen
-that security holes are discovered after this version of Mandrake Linux was
-finalized. If you do not know what a particular service is supposed to do
-or why it is being installed, then click \"No\". Clicking \"Yes\" will
-install the listed services and they will be started automatically by
-default. !!
-
-The \"Automatic dependencies\" option simply disables the warning dialog
-which appears whenever the installer automatically selects a package. This
-occurs because it has determined that it needs to satisfy a dependency with
-another package in order to successfully complete the installation.
-
-The tiny floppy disk icon at the bottom of the list allows to load the
-package list chosen during a previous installation. Clicking on this icon
-will ask you to insert a floppy disk previously created at the end of
-another installation. See the second tip of last step on how to create such
-a floppy."),
-
-configureNetwork =>
-__("You are now proposed to set up your Internet/network connection. If you
-wish to connect your computer to the Internet or to a local network, click
-\"OK\". The autodetection of network devices and modem will be launched. If
-this detection fails, uncheck the \"Use auto detection\" box next time. You
-may also choose not to configure the network, or do it later; in that case,
-simply click the \"Cancel\" button.
-
-Available connections are: traditional modem, ISDN modem, ADSL connection,
-cable modem, and finally a simple LAN connection (Ethernet).
-
-Here, we will not detail each configuration. Simply make sure that you have
-all the parameters from your Internet Service Provider or system
-administrator.
-
-You can consult the ``User Guide'' chapter about Internet connections for
-details about the configuration, or simply wait until your system is
-installed and use the program described there to configure your connection.
-
-If you wish to configure the network later after installation, or if you
-are finished configuring your network connection, click \"Cancel\"."),
-
-configureServices =>
-__("You may now choose which services you wish to start at boot time.
-
-Here are presented all the services available with the current
-installation. Review them carefully and uncheck those which are not always
-needed at boot time.
-
-You can get a short explanatory text about a service by selecting a
-specific service. However, if you are not sure whether a service is useful
-or not, it is safer to leave the default behavior.
-
-!! At this stage, be very careful if you intend to use your machine as a
-server: you will probably not want to start any services which you do not
-need. Please remember that several services can be dangerous if they are
-enabled on a server. In general, select only the services you really need.
-!!"),
-
-configureTimezoneGMT =>
-__("GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in
-local time according to the time zone you selected. It is however possible
-to deactivate this by deselecting \"Hardware clock set to GMT\" so that the
-hardware clock is the same as the system clock. This is useful when the
-machine is hosting another operating system like Windows.
-
-The \"Automatic time synchronization\" option will automatically regulate
-the clock by connecting to a remote time server on the Internet. In the
-list that is presented, choose a server located near you. Of course you
-must have a working Internet connection for this feature to work. It will
-actually install on your machine a time server which can be optionally used
-by other machines on your local network."),
-
-configureX =>
-__("X (for X Window System) is the heart of the GNU/Linux graphical interface
-on which all the graphical environments (KDE, GNOME, AfterStep,
-WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX
-will try to configure X automatically.
-
-It is extremely rare for it to fail, unless the hardware is very old (or
-very new). If it succeeds, it will start X automatically with the best
-resolution possible, depending on the size of the monitor. A window will
-then appear and ask you if you can see it.
-
-If you are doing an \"Expert\" installation, you will enter the X
-configuration wizard. See the corresponding section of the manual for more
-information about this wizard.
-
-If you can see the message during the test, and answer \"Yes\", then DrakX
-will proceed to the next step. If you cannot see the message, it simply
-means that the configuration was wrong and the test will automatically end
-after 10 seconds, restoring the screen."),
-
-configureXmain =>
-__("The first time you try the X configuration, you may not be very satisfied
-with its display (screen is too small, shifted left or right...). Hence,
-even if X starts up correctly, DrakX then asks you if the configuration
-suits you. It will also propose to change it by displaying a list of valid
-modes it could find, asking you to select one.
-
-As a last resort, if you still cannot get X to work, choose \"Change
-graphics card\", select \"Unlisted card\", and when prompted on which
-server, choose \"FBDev\". This is a failsafe option which works with any
-modern graphics card. Then choose \"Test again\" to be sure."),
-
-configureXxdm =>
-__("Finally, you will be asked whether you want to see the graphical interface
-at boot. Note this question will be asked even if you chose not to test the
-configuration. Obviously, you want to answer \"No\" if your machine is to
-act as a server, or if you were not successful in getting the display
-configured."),
-
-createBootdisk =>
-__("The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by
-booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<
-at the prompt. But in case your computer cannot boot from the CD-ROM, you
-should come back to this step for help in at least two situations:
-
- * when installing the bootloader, DrakX will rewrite the boot sector (MBR)
-of your main disk (unless you are using another boot manager), to allow you
-to start up with either Windows or GNU/Linux (assuming you have Windows in
-your system). If you need to reinstall Windows, the Microsoft install
-process will rewrite the boot sector, and then you will not be able to
-start GNU/Linux!
-
- * if a problem arises and you cannot start up GNU/Linux from the hard disk,
-this floppy disk will be the only means of starting up GNU/Linux. It
-contains a fair number of system tools for restoring a system, which has
-crashed due to a power failure, an unfortunate typing error, a typo in a
-password, or any other reason.
-
-When you click on this step, you will be asked to enter a disk inside the
-drive. The floppy disk you will insert must be empty or contain data which
-you do not need. You will not have to format it since DrakX will rewrite
-the whole disk."),
-
-doPartitionDisks =>
-__("At this point, you need to choose where you want to install the Mandrake
-Linux operating system on your hard drive. If your hard drive is empty or
-if an existing operating system is using all the available space, you will
-need to partition it. Basically, partitioning a hard drive consists of
-logically dividing it to create space to install your new Mandrake Linux
-system.
-
-Because the partitioning process' effects are usually irreversible,
-partitioning can be intimidating and stressful if you are an inexperienced
-user. Fortunately, there is a wizard which simplifies this process. Before
-beginning, please consult the manual and take your time.
-
-If you are running the installation in Expert mode, you will enter
-DiskDrake, the Mandrake Linux partitioning tool, which allows you to
-fine-tune your partitions. See the DiskDrake section in the ``User Guide''.
-From the installation interface, you can use the wizards as described here
-by clicking the dialog's \"Wizard\" button.
-
-If partitions have already been defined, either from a previous
-installation or from another partitioning tool, simply select those to
-install your Linux system.
-
-If partitions are not defined, you will need to create them using the
-wizard. Depending on your hard drive configuration, several options are
-available:
-
- * \"Use free space\": this option will simply lead to an automatic
-partitioning of your blank drive(s). You will not be prompted further;
-
- * \"Use existing partition\": the wizard has detected one or more existing
-Linux partitions on your hard drive. If you want to use them, choose this
-option;
-
- * \"Use the free space on the Windows; partition\": if MicrosoftWindows is
-installed on your hard drive and takes all the space available on it, you
-have to create free space for Linux data. To do so, you can delete your
-MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert
-mode'' solutions) or resize your MicrosoftWindows partition. Resizing can
-be performed without the loss of any data, provided you previously
-defragment the Windows partition. Backing up your data won't hurt either..
-This solution is recommended if you want to use both Mandrake Linux and
-MicrosoftWindows on the same computer.
-
- Before choosing this option, please understand that after this procedure,
-the size of your MicrosoftWindows partition will be smaller than at the
-present time. You will have less free space under MicrosoftWindows to store
-your data or to install new software;
-
- * \"Erase entire disk\": if you want to delete all data and all partitions
-present on your hard drive and replace them with your new Mandrake Linux
-system, choose this option. Be careful with this solution because you will
-not be able to revert your choice after you confirm;
-
- !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Remove Windows\": this will simply erase everything on the drive and
-begin fresh, partitioning everything from scratch. All data on your disk
-will be lost;
-
- !! If you choose this option, all data on your disk will be lost. !!
-
- * \"Expert mode\": choose this option if you want to manually partition
-your hard drive. Be careful it is a powerful but dangerous choice. You can
-very easily lose all your data. Hence, do not choose this unless you know
-what you are doing."),
-
-exitInstall =>
-__("There you are. Installation is now complete and your GNU/Linux system is
-ready to use. Just click \"OK\" to reboot the system. You can start
-GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as
-soon as the computer has booted up again.
-
-The \"Advanced\" button (in Expert mode only) shows two more buttons to:
-
- * \"generate auto-install floppy\": to create an installation floppy disk
-which will automatically perform a whole installation without the help of
-an operator, similar to the installation you just configured.
-
- Note that two different options are available after clicking the button:
-
- * \"Replay\". This is a partially automated installation as the
-partitioning step (and only this one) remains interactive;
-
- * \"Automated\". Fully automated installation: the hard disk is completely
-rewritten, all data is lost.
-
- This feature is very handy when installing a great number of similar
-machines. See the Auto install section on our web site;
-
- * \"Save packages selection\"(*): saves the package selection as done
-previously. Then, when doing another installation, insert the floppy inside
-the drive and run the installation going to the help screen by pressing on
-the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.
-
-(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type
-\"mformat a:\")"),
-
-formatPartitions =>
-__("Any partitions that have been newly defined must be formatted for use
-(formatting means creating a filesystem).
-
-At this time, you may wish to reformat some already existing partitions to
-erase any data they contain. If you wish to do that, please select those
-partitions as well.
-
-Please note that it is not necessary to reformat all pre-existing
-partitions. You must reformat the partitions containing the operating
-system (such as \"/\", \"/usr\" or \"/var\") but you do not have to
-reformat partitions containing data that you wish to keep (typically
-\"/home\").
-
-Please be careful when selecting partitions. After formatting, all data on
-the selected partitions will be deleted and you will not be able to recover
-any of it.
-
-Click on \"OK\" when you are ready to format partitions.
-
-Click on \"Cancel\" if you want to choose another partition for your new
-Mandrake Linux operating system installation.
-
-Click on \"Advanced\" if you wish to select partitions that will be checked
-for bad blocks on the disk."),
-
-installPackages =>
-__("Your new Mandrake Linux operating system is currently being installed.
-Depending on the number of packages you will be installing and the speed of
-your computer, this operation could take from a few minutes to a
-significant amount of time.
-
-Please be patient."),
-
-installUpdates =>
-__("At the time you are installing Mandrake Linux, it is likely that some
-packages have been updated since the initial release. Some bugs may have
-been fixed, and security issues solved. To allow you to benefit from these
-updates, you are now proposed to download them from the Internet. Choose
-\"Yes\" if you have a working Internet connection, or \"No\" if you prefer
-to install updated packages later.
-
-Choosing \"Yes\" displays a list of places from which updates can be
-retrieved. Choose the one nearest you. Then a package-selection tree
-appears: review the selection, and press \"Install\" to retrieve and
-install the selected package(s), or \"Cancel\" to abort."),
-
-license =>
-__("Before continuing, you should read carefully the terms of the license. It
-covers the whole Mandrake Linux distribution, and if you do not agree with
-all the terms in it, click on the \"Refuse\" button which will immediately
-terminate the installation. To continue with the installation, click on the
-\"Accept\" button."),
-
-miscellaneous =>
-__("At this point, it is time to choose the security level desired for the
-machine. As a rule of thumb, the more exposed the machine is, and the more
-the data stored in it is crucial, the higher the security level should be.
-However, a higher security level is generally obtained at the expense of
-easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''
-to get more information about the meaning of these levels.
-
-If you do not know what to choose, keep the default option."),
-
-partition_with_diskdrake =>
-__("At this point, you need to choose which partition(s) will be used for the
-installation of your Mandrake Linux system. If partitions have already been
-defined, either from a previous installation of GNU/Linux or from another
-partitioning tool, you can use existing partitions. Otherwise, hard drive
-partitions must be defined.
-
-To create partitions, you must first select a hard drive. You can select
-the disk for partitioning by clicking on ``hda'' for the first IDE drive,
-``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
-
-To partition the selected hard drive, you can use these options:
-
- * \"Clear all\": this option deletes all partitions on the selected hard
-drive;
-
- * \"Auto allocate\": this option enables to automatically create \"Ext2\"
-and swap partitions in free space of your hard drive;
-
- * \"More\": gives access to additional features:
-
- * \"Save partition table\": saves the partition table to a floppy. Useful
-for later partition-table recovery if necessary. It is strongly recommended
-to perform this step;
-
- * \"Restore partition table\": allows to restore a previously saved
-partition table from floppy disk;
-
- * \"Rescue partition table\": if your partition table is damaged, you can
-try to recover it using this option. Please be careful and remember that it
-can fail;
-
- * \"Reload partition table\": discards all changes and loads your initial
-partition table;
-
- * \"Removable media automounting\": unchecking this option will force users
-to manually mount and unmount removable medias such as floppies and
-CD-ROMs.
-
- * \"Wizard\": use this option if you wish to use a wizard to partition your
-hard drive. This is recommended if you do not have a good knowledge of
-partitioning;
-
- * \"Undo\": use this option to cancel your changes;
-
- * \"Toggle to normal/expert mode\": allows additional actions on partitions
-(type, options, format) and gives more information;
-
- * \"Done\": when you are finished partitioning your hard drive, this will
-save your changes back to disk.
-
-Note: you can reach any option using the keyboard. Navigate through the
-partitions using [Tab] and [Up/Down] arrows.
-
-When a partition is selected, you can use:
-
- * Ctrl-c to create a new partition (when an empty partition is selected);
-
- * Ctrl-d to delete a partition;
-
- * Ctrl-m to set the mount point.
-
-To get information about the different filesystem types available, please
-read the ext2fs chapter from the ``Reference Manual''.
-
-If you are installing on a PPC machine, you will want to create a small HFS
-``bootstrap'' partition of at least 1MB, which will be used by the yaboot
-bootloader. If you opt to make the partition a bit larger, say 50MB, you
-may find it a useful place to store a spare kernel and ramdisk images for
-emergency boot situations."),
-
-resizeFATChoose =>
-__("More than one Microsoft partition has been detected on your hard drive.
-Please choose the one you want to resize in order to install your new
-Mandrake Linux operating system.
-
-Each partition is listed as follows: \"Linux name\", \"Windows name\"
-\"Capacity\".
-
-\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc.
-
-\"Windows name\" is the letter of your hard drive under Windows (the first
-disk or partition is called \"C:\")."),
-
-resizeFATWait =>
-__("Please be patient. This operation can take several minutes."),
-
-selectInstallClass =>
-__("DrakX now needs to know if you want to perform a default (\"Recommended\")
-installation or if you want to have greater control (\"Expert\"). You can
-also choose to do a new install or an upgrade of an existing Mandrake Linux
-system:
-
- * \"Install\": completely wipes out the old system. In fact, depending on
-what currently holds your machine, you will be able to keep some old (Linux
-or other) partitions unchanged;
-
- * \"Upgrade\": this installation class allows to simply update the packages
-currently installed on your Mandrake Linux system. It keeps the current
-partitions of your hard drives as well as user configurations. All other
-configuration steps remain available with respect to plain installation;
-
- * \"Upgrade Packages Only\": this brand new class allows to upgrade an
-existing Mandrake Linux system while keeping all system configurations
-unchanged. Adding new packages to the current installation is also
-possible.
-
-Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"
-release.
-
-Depending on your knowledge of GNU/Linux, select one of the following
-choices:
-
- * Recommended: choose this if you have never installed a GNU/Linux
-operating system. The installation will be very easy and you will only be
-asked a few questions;
-
- * Expert: if you have a good knowledge of GNU/Linux, you can choose this
-installation class. The expert installation will allow you to perform a
-highly-customized installation. Answering some of the questions can be
-difficult if you do not have a good knowledge of GNU/Linux, so do not
-choose this unless you know what you are doing."),
-
-selectKeyboard =>
-__("Normally, DrakX selects the right keyboard for you (depending on the
-language you have chosen) and you won't even see this step. However, you
-might not have a keyboard that corresponds exactly to your language: for
-example, if you are an English speaking Swiss person, you may still want
-your keyboard to be a Swiss keyboard. Or if you speak English but are
-located in Quebec, you may find yourself in the same situation. In both
-cases, you will have to go back to this installation step and select an
-appropriate keyboard from the list.
-
-Click on the \"More\" button to be presented with the complete list of
-supported keyboards."),
-
-selectLanguage =>
-__("Please choose your preferred language for installation and system usage.
-
-Clicking on the \"Advanced\" button will allow you to select other
-languages to be installed on your workstation. Selecting other languages
-will install the language-specific files for system documentation and
-applications. For example, if you will host users from Spain on your
-machine, select English as the main language in the tree view and in the
-Advanced section click on the box corresponding to \"Spanish|Spain\".
-
-Note that multiple languages may be installed. Once you have selected any
-additional locales, click the \"OK\" button to continue."),
-
-selectMouse =>
-__("DrakX generally detects the number of buttons your mouse has. If not, it
-assumes you have a two-button mouse and will set it up for third-button
-emulation. DrakX will automatically know whether it is a PS/2, serial or
-USB mouse.
-
-If you wish to specify a different type of mouse select the appropriate
-type from the provided list.
-
-If you choose a mouse other than the default, a test screen will be
-displayed. Use the buttons and wheel to verify that the settings are
-correct. If the mouse is not working well, press the space bar or [Return]
-to \"Cancel\" and choose again."),
-
-selectSerialPort =>
-__("Please select the correct port. For example, the \"COM1\" port under
-Windows is named \"ttyS0\" under GNU/Linux."),
-
-setRootPassword =>
-__("This is the most crucial decision point for the security of your GNU/Linux
-system: you have to enter the \"root\" password. \"root\" is the system
-administrator and is the only one authorized to make updates, add users,
-change the overall system configuration, and so on. In short, \"root\" can
-do everything! That is why you must choose a password that is difficult to
-guess DrakX will tell you if it is too easy. As you can see, you can choose
-not to enter a password, but we strongly advise you against this if only
-for one reason: do not think that because you booted GNU/Linux that your
-other operating systems are safe from mistakes. Since \"root\" can overcome
-all limitations and unintentionally erase all data on partitions by
-carelessly accessing the partitions themselves, it is important for it to
-be difficult to become \"root\".
-
-The password should be a mixture of alphanumeric characters and at least 8
-characters long. Never write down the \"root\" password it makes it too
-easy to compromise a system.
-
-However, please do not make the password too long or complicated because
-you must be able to remember it without too much effort.
-
-The password will not be displayed on screen as you type it in. Hence, you
-will have to type the password twice to reduce the chance of a typing
-error. If you do happen to make the same typing error twice, this
-``incorrect'' password will have to be used the first time you connect.
-
-In Expert mode, you will be asked if you will be connecting to an
-authentication server, like NIS or LDAP.
-
-If your network uses the LDAP (or NIS) protocol for authentication, select
-\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your
-network administrator.
-
-If your computer is not connected to any administrated network, you will
-want to choose \"Local files\" for authentication."),
-
-setupBootloader =>
-__("LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally
-automated. In fact, DrakX analyzes the disk boot sector and acts
-accordingly, depending on what it finds here:
-
- * if a Windows boot sector is found, it will replace it with a grub/LILO
-boot sector. Hence, you will be able to load either GNU/Linux or another
-OS;
-
- * if a grub or LILO boot sector is found, it will replace it with a new
-one.
-
-If in doubt, DrakX will display a dialog with various options.
-
- * \"Bootloader to use\": you have three choices:
-
- * \"GRUB\": if you prefer grub (text menu).
-
- * \"LILO with graphical menu\": if you prefer LILO with its graphical
-interface.
-
- * \"LILO with text menu\": if you prefer LILO with its text menu interface.
-
- * \"Boot device\": in most cases, you will not change the default
-(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the
-second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");
-
- * \"Delay before booting the default image\": when rebooting the computer,
-this is the delay granted to the user to choose in the bootloader menu,
-another boot entry than the default one.
-
-!! Beware that if you choose not to install a bootloader (by selecting
-\"Cancel\" here), you must ensure that you have a way to boot your Mandrake
-Linux system! Also, be sure you know what you do before changing any of the
-options. !!
-
-Clicking the \"Advanced\" button in this dialog will offer many advanced
-options, which are reserved to the expert user.
-
-After you have configured the general bootloader parameters, the list of
-boot options which will be available at boot time will be displayed.
-
-If there is another operating system installed on your machine, it will
-automatically be added to the boot menu. Here, you can choose to fine-tune
-the existing options. Select an entry and click \"Modify\" to modify or
-remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next
-installation step."),
-
-setupBootloaderAddEntry =>
-__("LILO (the LInux LOader) and grub are bootloaders: they are able to boot
-either GNU/Linux or any other operating system present on your computer.
-Normally, these other operating systems are correctly detected and
-installed. If this is not the case, you can add an entry by hand in this
-screen. Be careful to choose the correct parameters.
-
-You may also not want to give access to these other operating systems to
-anyone. In which case, you can delete the corresponding entries. But then,
-you will need a boot disk in order to boot those other operating systems!"),
-
-setupBootloaderBeginner =>
-__("You must indicate where you wish to place the information required to boot
-to GNU/Linux.
-
-Unless you know exactly what you are doing, choose \"First sector of drive
-(MBR)\"."),
-
-setupDefaultSpooler =>
-__("Here, we select a printing system for your computer. Other OSs may offer
-you one, but Mandrake Linux offers three.
-
- * \"pdq\" which means ``print, don't queue'', is the choice if you have a
-direct connection to your printer and you want to be able to panic out of
-printer jams, and you do not have networked printers. It will handle only
-very simple network cases and is somewhat slow for networks. Pick \"pdq\"
-if this is your maiden voyage to GNU/Linux. You can change your choices
-after installation by running PrinterDrake from the Mandrake Control Center
-and clicking the expert button.
-
- * \"CUPS\"``Common Unix Printing System'', is excellent at printing to your
-local printer and also halfway-around the planet. It is simple and can act
-as a server or a client for the ancient \"lpd\" printing system. Hence, it
-is compatible with the systems that went before. It can do many tricks, but
-the basic setup is almost as easy as \"pdq\". If you need this to emulate
-an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has
-graphical front-ends for printing or choosing printer options.
-
- * \"lprNG\"``line printer daemon New Generation''. This system can do
-approximately the same things the others can do, but it will print to
-printers mounted on a Novell Network, because it supports the IPX protocol,
-and it can print directly to shell commands. If you have need of Novell or
-printing to commands without using a separate pipe construct, use lprNG.
-Otherwise, CUPS is preferable as it is simpler and better at working over
-networks."),
-
-setupSCSI =>
-__("DrakX now detects any IDE device present in your computer. It will also
-scan for one or more PCI SCSI card(s) on your system. If a SCSI card is
-found, DrakX will automatically install the appropriate driver.
-
-Because hardware detection does not always detect a piece of hardware,
-DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"
-if you know that there is a SCSI card installed in your machine. You will
-be presented a list of SCSI cards to choose from. Click \"No\" if you have
-no SCSI hardware. If you are unsure, you can check the list of hardware
-detected in your machine by selecting \"See hardware info\" and clicking
-\"OK\". Examine the list of hardware and then click on the \"OK\" button to
-return to the SCSI interface question.
-
-If you have to manually specify your adapter, DrakX will ask if you want to
-specify options for it. You should allow DrakX to probe the hardware for
-the card-specific options which the hardware needs to initialize. This
-usually works well.
-
-If DrakX is not able to probe for the options which need to be passed, you
-will need to provide options to the driver manually. Please review the
-``User Guide'' (chapter 3, in the ``Collecting Information on Your
-Hardware'' section) for hints on retrieving the parameters required from
-hardware documentation, from the manufacturer's web site (if you have
-Internet access) or from MicrosoftWindows (if you used this hardware with
-Windows on your system)."),
-
-setupYabootAddEntry =>
-__("You can add additional entries for yaboot, either for other operating
-systems, alternate kernels, or for an emergency boot image.
-
-For other OSs, the entry consists only of a label and the \"root\"
-partition.
-
-For Linux, there are a few possible options:
-
- * Label: this is simply the name you will have to type at the yaboot prompt
-to select this boot option;
-
- * Image: this would be the name of the kernel to boot. Typically, vmlinux
-or a variation of vmlinux with an extension;
-
- * Root: the \"root\" device or ``/'' for your Linux installation;
-
- * Append: on Apple hardware, the kernel append option is used quite often
-to assist in initializing video hardware, or to enable keyboard mouse
-button emulation for the often lacking 2nd and 3rd mouse buttons on a stock
-Apple mouse. The following are some examples:
-
- video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 hda=autotune
-
- video=atyfb:vmode:12,cmode:24 adb_buttons=103,111
-
- * Initrd: this option can be used either to load initial modules, before
-the boot device is available, or to load a ramdisk image for an emergency
-boot situation;
-
- * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you
-need to allocate a large ramdisk, this option can be used;
-
- * Read-write: normally the \"root\" partition is initially brought up in
-read-only, to allow a file system check before the system becomes ``live''.
-Here, you can override this option;
-
- * NoVideo: should the Apple video hardware prove to be exceptionally
-problematic, you can select this option to boot in ``novideo'' mode, with
-native frame buffer support;
-
- * Default: selects this entry as being the default Linux selection,
-selectable by just pressing ENTER at the yaboot prompt. This entry will
-also be highlighted with a ``*'', if you press [Tab] to see the boot
-selections."),
-
-setupYabootGeneral =>
-__("Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot
-either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,
-these other operating systems are correctly detected and installed. If this
-is not the case, you can add an entry by hand in this screen. Be careful to
-choose the correct parameters.
-
-Yaboot's main options are:
-
- * Init Message: a simple text message displayed before the boot prompt;
-
- * Boot Device: indicates where you want to place the information required
-to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier
-to hold this information;
-
- * Open Firmware Delay: unlike LILO, there are two delays available with
-yaboot. The first delay is measured in seconds and at this point, you can
-choose between CD, OF boot, MacOS or Linux;
-
- * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.
-After selecting Linux, you will have this delay in 0.1 second before your
-default kernel description is selected;
-
- * Enable CD Boot?: checking this option allows you to choose ``C'' for CD
-at the first boot prompt;
-
- * Enable OF Boot?: checking this option allows you to choose ``N'' for Open
-Firmware at the first boot prompt;
-
- * Default OS: you can select which OS will boot by default when the Open
-Firmware Delay expires."),
-
-summary =>
-__("Here are presented various parameters concerning your machine. Depending on
-your installed hardware, you may or not, see the following entries:
-
- * \"Mouse\": check the current mouse configuration and click on the button
-to change it if necessary;
-
- * \"Keyboard\": check the current keyboard map configuration and click on
-the button to change that if necessary;
-
- * \"Timezone\": DrakX, by default, guesses your time zone from the language
-you have chosen. But here again, as for the choice of a keyboard, you may
-not be in the country for which the chosen language should correspond.
-Hence, you may need to click on the \"Timezone\" button in order to
-configure the clock according to the time zone you are in;
-
- * \"Printer\": clicking on the \"No Printer\" button will open the printer
-configuration wizard;
-
- * \"Sound card\": if a sound card is detected on your system, it is
-displayed here. No modification possible at installation time;
-
- * \"TV card\": if a TV card is detected on your system, it is displayed
-here. No modification possible at installation time;
-
- * \"ISDN card\": if an ISDN card is detected on your system, it is
-displayed here. You can click on the button to change the parameters
-associated with it."),
-
-takeOverHdChoose =>
-__("Choose the hard drive you want to erase in order to install your new
-Mandrake Linux partition. Be careful, all data present on it will be lost
-and will not be recoverable!"),
-
-takeOverHdConfirm =>
-__("Click on \"OK\" if you want to delete all data and partitions present on
-this hard drive. Be careful, after clicking on \"OK\", you will not be able
-to recover any data and partitions present on this hard drive, including
-any Windows data.
-
-Click on \"Cancel\" to cancel this operation without losing any data and
-partitions present on this hard drive."),
-);
diff --git a/perl-install/http.pm b/perl-install/http.pm
deleted file mode 100644
index 8d1e8d5de..000000000
--- a/perl-install/http.pm
+++ /dev/null
@@ -1,42 +0,0 @@
-package http; # $Id$
-
-use IO::Socket;
-use network;
-
-
-my $sock;
-
-sub getFile {
- local($^W) = 0;
-
- my ($url) = @_;
- $sock->close if $sock;
- $url =~ m|/XXX$| and return; #- force closing connection.
-
- my ($host, $port, $path) = $url =~ m,^http://([^/:]+)(?::(\d+))?(/\S*)?$,;
- $host = network::resolv($host);
-
- $sock = IO::Socket::INET->new(PeerAddr => $host,
- PeerPort => $port || 80,
- Proto => 'tcp',
- Timeout => 60) or die "can't connect $@";
- $sock->autoflush;
- print $sock join("\015\012" =>
- "GET $path HTTP/1.0",
- "Host: $host" . ($port && ":$port"),
- "User-Agent: DrakX/vivelinuxabaszindozs",
- "", "");
-
- #- skip until empty line
- my ($now, $last, $buf, $tmp) = 0;
- my $read = sub { sysread($sock, $buf, 1) || die; $tmp .= $buf };
- do {
- $last = $now;
- &$read; &$read if $buf =~ /\015/;
- $now = $buf =~ /\012/;
- } until ($now && $last);
-
- $tmp =~ /^.*\b200\b/ ? $sock : undef;
-}
-
-1;
diff --git a/perl-install/install2 b/perl-install/install2
deleted file mode 100755
index b26684f9f..000000000
--- a/perl-install/install2
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/usr/bin/perl
-#- PERL_INSTALL_DEBUG is used to launch stage2 in debug mode
-
-#- Mandrake Graphic Install $Id$
-#- Copyright (C) 1999/2000 MandrakeSoft (pixel@mandrakesoft.com)
-#-
-#- This program is free software; you can redistribute it and/or modify
-#- it under the terms of the GNU General Public License as published by
-#- the Free Software Foundation; either version 2, or (at your option)
-#- any later version.
-#-
-#- This program is distributed in the hope that it will be useful,
-#- but WITHOUT ANY WARRANTY; without even the implied warranty of
-#- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#- GNU General Public License for more details.
-#-
-#- You should have received a copy of the GNU General Public License
-#- along with this program; if not, write to the Free Software
-#- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use diagnostics;
-use strict;
-
-BEGIN {
- #- for testing purpose
- (my $f = __FILE__) =~ s|install2$|list_modules.pm|;
- -e $f or symlink '../kernel/list_modules.pm', $f;
-}
-
-use lib qw(/usr/bin/perl-install .);
-use install2;
-
-$::testing = $ENV{PERL_INSTALL_TEST};
-$::isStandalone = 0;
-
-install2::main(@ARGV);
-
-c::_exit(0);
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
deleted file mode 100644
index c5f3cddde..000000000
--- a/perl-install/install2.pm
+++ /dev/null
@@ -1,642 +0,0 @@
-
-package install2; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($o $version);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use steps;
-use common;
-use install_any qw(:all);
-use install_steps;
-use lang;
-use keyboard;
-use mouse;
-use fsedit;
-use devices;
-use partition_table qw(:types);
-use modules;
-use detect_devices;
-use run_program;
-use any;
-use log;
-use fs;
-#-$::corporate=1;
-
-
-#-#######################################################################################
-#-$O
-#-the big struct which contain, well everything (globals + the interactive methods ...)
-#-if you want to do a kickstart file, you just have to add all the required fields (see for example
-#-the variable $default)
-#-#######################################################################################
-$o = $::o = {
-# bootloader => { linear => 0, lba32 => 1, message => 1, timeout => 5, restricted => 0 },
- mkbootdisk => 0, #- no mkbootdisk if 0 or undef, find a floppy with 1, or fd1
-#- packages => [ qw() ],
- partitioning => { clearall => 0, eraseBadPartitions => 0, auto_allocate => 0 }, #-, readonly => 0 },
- authentication => { md5 => 1, shadow => 1 },
- lang => 'en_US',
- isUpgrade => 0,
- toRemove => [],
- toSave => [],
-#- simple_themes => 1,
-
- timezone => {
-#- timezone => "Europe/Paris",
-#- UTC => 1,
- },
-#- superuser => { password => 'a', shell => '/bin/bash', realname => 'God' },
-#- user => { name => 'foo', password => 'bar', home => '/home/foo', shell => '/bin/bash', realname => 'really, it is foo' },
-
-#- keyboard => 'de',
-#- display => "192.168.1.19:1",
- steps => \%steps::installSteps,
- orderedSteps => \@steps::orderedInstallSteps,
-
-#- for the list of fields available for user and superuser, see @etc_pass_fields in install_steps.pm
-#- intf => { eth0 => { DEVICE => "eth0", IPADDR => '1.2.3.4', NETMASK => '255.255.255.128' } },
-
-#-step : the current one
-#-prefix
-#-mouse
-#-keyboard
-#-netc
-#-methods
-#-packages compss
-#-printer haveone entry(cf printer.pm)
-
-};
-
-
-sub installStepsCall {
- my ($o, $auto, $fun, @args) = @_;
- $fun = "install_steps::$fun" if $auto;
- $o->$fun(@args);
-}
-
-#-######################################################################################
-#- Steps Functions
-#- each step function are called with two arguments : clicked(because if you are a
-#- beginner you can force the the step) and the entered number
-#-######################################################################################
-
-#------------------------------------------------------------------------------
-sub selectLanguage {
- my ($clicked, $ent_number, $auto) = @_;
-
- installStepsCall($o, $auto, 'selectLanguage', $ent_number == 1);
-
- $o->acceptLicence;
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
- my ($clicked, $ent_number, $auto) = @_;
-
- require pkgs;
- my ($first_time) = $ent_number == 1;
-
- add2hash($o->{mouse} ||= {}, mouse::read($o->{prefix})) if $o->{isUpgrade} && $first_time;
-
- installStepsCall($o, $auto, 'selectMouse', !$first_time || $clicked);
-
- addToBeDone { mouse::write($o->{prefix}, $o->{mouse}) } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub setupSCSI {
- my ($clicked, $ent_number, $auto) = @_;
-
- if (!$::live && !$::g_auto_install && !$o->{blank} && !$::testing) {
- -s modules::cz_file() or die _("Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)", modules::cz_file());
- }
-
- installStepsCall($o, $auto, 'setupSCSI', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
- my ($clicked, $first_time, $auto) = ($_[0], $_[1] == 1, $_[2]);
-
- if ($o->{isUpgrade} && $first_time && $o->{keyboard_unsafe}) {
- my $keyboard = keyboard::read($o->{prefix});
- $keyboard and $o->{keyboard} = $keyboard;
- }
- installStepsCall($o, $auto, 'selectKeyboard', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
- my ($clicked, $ent_number, $auto) = @_;
-
- installStepsCall($o, $auto, 'selectInstallClass', $clicked);
-
- if ($o->{steps}{choosePackages}{entered} >= 1 && !$o->{steps}{installPackages}{done}) {
- installStepsCall($o, $auto, 'setPackages');
- installStepsCall($o, $auto, 'selectPackagesToUpgrade') if $o->{isUpgrade};
- }
- if ($o->{isUpgrade}) {
- @{$o->{orderedSteps}} = map { /setupSCSI/ ? ($_, "doPartitionDisks") : $_ }
- grep { !/doPartitionDisks/ } @{$o->{orderedSteps}};
- $o->{keepConfiguration} and @{$o->{orderedSteps}} = grep { !/selectMouse|selectKeyboard|miscellaneous|setRootPassword|addUser|configureNetwork|installUpdates|summary|configureServices|configureX/ } @{$o->{orderedSteps}};
- my $s; foreach (@{$o->{orderedSteps}}) {
- $s->{next} = $_ if $s;
- $s = $o->{steps}{$_};
- }
- }
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
- my ($clicked, $ent_number, $auto) = @_;
- $o->{steps}{formatPartitions}{done} = 0;
- installStepsCall($o, $auto, 'doPartitionDisksBefore');
- installStepsCall($o, $auto, 'doPartitionDisks');
- installStepsCall($o, $auto, 'doPartitionDisksAfter');
-}
-
-sub formatPartitions {
- my ($clicked, $ent_number, $auto) = @_;
-
- $o->{steps}{choosePackages}{done} = 0;
- installStepsCall($o, $auto, 'choosePartitionsToFormat', $o->{fstab}) if !$o->{isUpgrade};
- my $want_root_formated = fsedit::get_root($o->{fstab})->{toFormat};
- if ($want_root_formated) {
- foreach ('/usr') {
- my $part = fsedit::mntpoint2part($_, $o->{fstab}) or next;
- $part->{toFormat} or die _("You must also format %s", $_);
- }
- }
- installStepsCall($o, $auto, 'formatMountPartitions', $o->{fstab}) if !$::testing;
-
- if ($want_root_formated) {
- #- we formatted /, ensure /var/lib/rpm is cleaned otherwise bad things can happen
- #- (especially when /var is *not* formatted)
- eval { rm_rf("$o->{prefix}/var/lib/rpm") };
- }
-
- mkdir "$o->{prefix}/$_", 0755 foreach
- qw(dev etc etc/profile.d etc/rpm etc/sysconfig etc/sysconfig/console
- etc/sysconfig/network-scripts etc/sysconfig/console/consolefonts
- etc/sysconfig/console/consoletrans
- home mnt tmp var var/tmp var/lib var/lib/rpm var/lib/urpmi);
- mkdir "$o->{prefix}/$_", 0700 foreach qw(root root/tmp root/drakx);
-
- common::screenshot_dir__and_move();
-
- any::rotate_logs($o->{prefix});
-
- require raid;
- raid::prepare_prefixed($o->{all_hds}{raids}, $o->{prefix});
-}
-
-#------------------------------------------------------------------------------
-sub choosePackages {
- my ($clicked, $ent_number, $auto) = @_;
- require pkgs;
-
- #- always setPackages as it may have to copy hdlist files and depslist file.
- installStepsCall($o, $auto, 'setPackages');
- installStepsCall($o, $auto, 'selectPackagesToUpgrade') if $o->{isUpgrade} && $ent_number == 1;
-
- installStepsCall($o, $auto, 'choosePackages', $o->{packages}, $o->{compssUsers}, $ent_number == 1);
- log::l("compssUsersChoice's: ", join(" ", grep { $o->{compssUsersChoice}{$_} } keys %{$o->{compssUsersChoice}}));
-
- #- check pre-condition where base backage has to be selected.
- pkgs::packageByName($o->{packages}, 'basesystem')->flag_selected or die "basesystem package not selected";
-
- #- check if there are package that need installation.
- $o->{steps}{installPackages}{done} = 0 if $o->{steps}{installPackages}{done} && pkgs::packagesToInstall($o->{packages}) > 0;
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
- my ($clicked, $ent_number, $auto) = @_;
-
- installStepsCall($o, $auto, 'readBootloaderConfigBeforeInstall') if $ent_number == 1;
-
- installStepsCall($o, $auto, 'beforeInstallPackages');
- installStepsCall($o, $auto, 'installPackages');
- installStepsCall($o, $auto, 'afterInstallPackages');
-}
-#------------------------------------------------------------------------------
-sub miscellaneous {
- my ($clicked, $ent_number, $auto) = @_;
-
- installStepsCall($o, $auto, 'miscellaneousBefore', $clicked);
- installStepsCall($o, $auto, 'miscellaneous', $clicked);
- installStepsCall($o, $auto, 'miscellaneousAfter', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub summary {
- my ($clicked, $ent_number, $auto) = @_;
- installStepsCall($o, $auto, 'summary', $ent_number == 1);
-}
-#------------------------------------------------------------------------------
-sub configureNetwork {
- my ($clicked, $ent_number, $auto) = @_;
- #- get current configuration of network device.
- require network;
- eval { network::read_all_conf($o->{prefix}, $o->{netc} ||= {}, $o->{intf} ||= {}) };
- installStepsCall($o, $auto, 'configureNetwork', $ent_number == 1, $clicked);
-}
-#------------------------------------------------------------------------------
-sub installCrypto {
- my ($clicked, $ent_number, $auto) = @_;
- installStepsCall($o, $auto, 'installCrypto');
-}
-#------------------------------------------------------------------------------
-sub installUpdates {
- my ($clicked, $ent_number, $auto) = @_;
- installStepsCall($o, $auto, 'installUpdates');
-}
-#------------------------------------------------------------------------------
-sub configureServices {
- my ($clicked, $ent_number, $auto) = @_;
- installStepsCall($o, $auto, 'configureServices', $clicked);
-}
-#------------------------------------------------------------------------------
-sub setRootPassword {
- my ($clicked, $ent_number, $auto) = @_;
- return if $o->{isUpgrade};
-
- installStepsCall($o, $auto, 'setRootPassword', $clicked);
- addToBeDone { install_any::setAuthentication($o) } 'installPackages';
-}
-#------------------------------------------------------------------------------
-sub addUser {
- my ($clicked, $ent_number, $auto) = @_;
- return if $o->{isUpgrade} && !$clicked;
-
- installStepsCall($o, $auto, 'addUser', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk {
- my ($clicked, $ent_number, $auto) = @_;
- modules::write_conf($o->{prefix});
- installStepsCall($o, $auto, 'createBootdisk', $ent_number == 1, $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
- my ($clicked, $ent_number, $auto) = @_;
- return if $::g_auto_install;
-
- modules::write_conf($o->{prefix});
-
- installStepsCall($o, $auto, 'setupBootloaderBefore') if $ent_number == 1;
- installStepsCall($o, $auto, 'setupBootloader', $ent_number-1 + $clicked*2); #- gore :-(
-
- local $ENV{DRAKX_PASSWORD} = $o->{bootloader}{password};
- local $ENV{DURING_INSTALL} = 1;
- run_program::rooted($o->{prefix}, "/usr/sbin/msec", "-o", "run_commands=0", "-o", "log=stderr", $o->{security});
- any::config_libsafe($o->{prefix}, $o->{libsafe});
-}
-#------------------------------------------------------------------------------
-sub configureX {
- my ($clicked, $ent_number, $auto) = @_;
-
- #- done here and also at the end of install2.pm, just in case...
- install_any::write_fstab($o);
- modules::write_conf($o->{prefix});
-
- require pkgs;
- installStepsCall($o, $auto, 'configureX', $clicked) if pkgs::packageByName($o->{packages}, 'XFree86')->flag_installed && !$o->{X}{disabled} || $clicked || $::testing;
-}
-#------------------------------------------------------------------------------
-sub exitInstall {
- my ($clicked, $ent_number, $auto) = @_;
- installStepsCall($o, $auto, 'exitInstall', getNextStep() eq 'exitInstall');
-}
-
-
-sub start_i810fb {
-
- my ($vga) = cat_('/proc/cmdline') =~ /vga=(\S+)/;
- return if !$vga || listlength(cat_('/proc/fb'));
-
- my %vga_to_xres = (0x311 => '640', 0x314 => '800', 0x317 => '1024');
- my $xres = $vga_to_xres{$vga} || '800';
-
- log::l("trying to load i810fb module with xres <$xres> (vga was <$vga>)");
- eval {
- any::ddcxinfos(); # keep the result otherwise ddcxinfos doesn't return good results afterwards
- modules::load([ 'i810fb',
- "xres=$xres", 'hsync1=32', 'hsync2=48', 'vsync1=50', 'vsync2=70', #- this sucking i810fb does not accept floating point numbers in hsync!
- 'vram=2', 'bpp=16', 'accel=1', 'mtrr=1', 'hwcur=1', 'xcon=4' ]);
- };
-}
-
-
-#-######################################################################################
-#- MAIN
-#-######################################################################################
-sub main {
- $SIG{__DIE__} = sub { chomp(my $err = $_[0]); log::l("warning: $err") };
- $SIG{SEGV} = sub {
- my $msg = "segmentation fault: seems like memory is missing as the install crashes"; print "$msg\n"; log::l($msg);
- $o->ask_warn('', $msg);
- setVirtual(1);
- require install_steps_auto_install;
- install_steps_auto_install_non_interactive::errorInStep ();
- };
- $ENV{PERL_BADLANG} = 1;
- umask 022;
-
- $::isInstall = 1;
- $::expert = $::g_auto_install = 0;
-
-#- c::unlimit_core() unless $::testing;
-
- my ($cfg, $patch, @auto);
- my %cmdline; map {
- my ($n, $v) = split '=';
- $cmdline{$n} = $v || 1;
- } split ' ', cat_("/proc/cmdline");
-
- my $opt; foreach (@_) {
- if (/^--?(.*)/) {
- $cmdline{$opt} = 1 if $opt;
- $opt = $1;
- } else {
- $cmdline{$opt} = $_ if $opt;
- $opt = '';
- }
- } $cmdline{$opt} = 1 if $opt;
-
- map_each {
- my ($n, $v) = @_;
- my $f = ${{
- oem => sub { $::oem = $v },
- lang => sub { $o->{lang} = $v },
- flang => sub { $o->{lang} = $v ; push @auto, 'selectLanguage' },
- method => sub { $o->{method} = $v },
- pcmcia => sub { $o->{pcmcia} = $v },
- vga16 => sub { $o->{vga16} = $v },
- vga => sub { $o->{vga} = $v },
- step => sub { $o->{steps}{first} = $v },
- expert => sub { $::expert = $v },
- fbeginner => sub { $::expert = 0; push @auto, 'selectInstallClass' },
- fexpert => sub { $::expert = 1; push @auto, 'selectInstallClass' },
- desktop => sub { $o->{meta_class} = 'desktop' },
- firewall => sub { $o->{meta_class} = 'firewall'; push @auto, 'selectInstallClass'},
- lnx4win => sub { $o->{lnx4win} = 1 },
- readonly => sub { $o->{partitioning}{readonly} = $v ne "0" },
- display => sub { $o->{display} = $v },
- askdisplay => sub { print "Please enter the X11 display to perform the install on ? "; $o->{display} = chomp_(scalar(<STDIN>)) },
- security => sub { $o->{security} = $v },
- live => sub { $::live = 1 },
- noauto => sub { $::noauto = 1 },
- test => sub { $::testing = 1 },
- patch => sub { $patch = 1 },
- defcfg => sub { $cfg = $v },
- newt => sub { $o->{interactive} = "newt" },
- text => sub { $o->{interactive} = "newt" },
- stdio => sub { $o->{interactive} = "stdio"},
- corporate => sub { $::corporate = 1 },
- kickstart => sub { $::auto_install = $v },
- auto_install => sub { $::auto_install = $v },
- simple_themes => sub { $o->{simple_themes} = 1 },
- useless_thing_accepted => sub { $o->{useless_thing_accepted} = 1 },
- alawindows => sub { $o->{security} = 0; $o->{partitioning}{clearall} = 1; $o->{bootloader}{crushMbr} = 1 },
- fdisk => sub { $o->{partitioning}{fdisk} = 1 },
- g_auto_install => sub { $::testing = $::g_auto_install = 1; $o->{partitioning}{auto_allocate} = 1 },
- nomouseprobe => sub { $o->{nomouseprobe} = $v },
- blank => sub { $o->{blank} = 1},
- updatemodules => sub { $o->{updatemodules} = 1},
- }}{lc $n}; &$f if $f;
- } %cmdline;
-
- if ($::testing) {
- $ENV{SHARE_PATH} ||= "/export/Mandrake/mdkinst/usr/share";
- $ENV{SHARE_PATH} = "/usr/share" if !-e $ENV{SHARE_PATH};
- } else {
- $ENV{SHARE_PATH} ||= "/usr/share";
- }
-
- undef $::auto_install if $cfg;
- if ($::g_auto_install) {
- (my $root = `/bin/pwd`) =~ s|(/[^/]*){5}$||;
- symlinkf $root, "/tmp/image" or die "unable to create link /tmp/image";
- $o->{method} ||= "cdrom";
- $o->{mkbootdisk} = 0;
- }
- unless ($::testing || $::live) {
- symlink "rhimage", "/tmp/image"; #- for compatibility with old stage1
- unlink $_ foreach "/modules/modules.mar", "/sbin/stage1";
- }
-
- print STDERR "in second stage install\n";
- log::openLog(($::testing || $o->{localInstall}) && 'debug.log');
- log::l("second stage install running (", any::drakx_version(), ")");
-
- $o->{prefix} = $::testing ? "/tmp/test-perl-install" : $::live ? "" : "/mnt";
- $o->{root} = $::testing ? "/tmp/root-perl-install" : "/";
- $o->{isUpgrade} = 1 if $::live;
- mkdir $o->{prefix}, 0755;
- mkdir $o->{root}, 0755;
- devices::make("/dev/zero"); #- needed by ddcxinfos
-
- #- make sure we don't pick up any gunk from the outside world
- my $remote_path = "$o->{prefix}/sbin:$o->{prefix}/bin:$o->{prefix}/usr/sbin:$o->{prefix}/usr/bin:$o->{prefix}/usr/X11R6/bin";
- $ENV{PATH} = "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin:$remote_path" unless $::g_auto_install;
-
- eval { spawnShell() };
-
- $o->{prefix} = $::testing ? "/tmp/test-perl-install" : $::live ? "" : "/mnt";
- mkdir $o->{prefix}, 0755;
-
- modules::load_dependencies(($::testing ? ".." : "") . "/modules/modules.dep");
- modules::read_stage1_conf($_) foreach "/tmp/conf.modules", "/etc/modules.conf";
- modules::read_already_loaded();
-
- #- done before auto_install is called to allow the -IP feature on auto_install file name
- if (-e '/tmp/network') {
- require network;
- #- get stage1 network configuration if any.
- log::l('found /tmp/network');
- $o->{netc} ||= {};
- add2hash($o->{netc}, network::read_conf('/tmp/network'));
- if (my ($file) = glob_('/tmp/ifcfg-*')) {
- log::l("found network config file $file");
- my $l = network::read_interface_conf($file);
- $o->{intf} ||= { $l->{DEVICE} => $l };
- }
- if (-e '/etc/resolv.conf') {
- my $file ='/etc/resolv.conf';
- log::l("found network config file $file");
- add2hash($o->{netc}, network::read_resolv_conf($file));
- }
- }
-
- #- done after module dependencies are loaded for "vfat depends on fat"
- if ($::auto_install) {
- if ($::auto_install =~ /-IP(\.pl)?$/) {
- my $ip = join('', map { sprintf "%02X", $_ } split '\.', $o->{intf}{IPADDR});
- $::auto_install =~ s/-IP(\.pl)?$/-$ip$1/;
- }
- require install_steps_auto_install;
- eval { $o = $::o = install_any::loadO($o, $::auto_install) };
- if ($@) {
- if ($o->{useless_thing_accepted}) { #- Pixel's hack to be able to fail through
- log::l("error using auto_install, continuing");
- undef $::auto_install;
- } else {
- print "Error using auto_install\n$@\n";
- install_steps_auto_install_non_interactive::errorInStep ();
- }
- } else {
- log::l("auto install config file loaded successfully");
- }
- }
- $o->{interactive} ||= 'gtk' if !$::auto_install;
-
- if ($o->{interactive} eq "gtk" && availableMemory < 22 * 1024) {
- log::l("switching to newt install cuz not enough memory");
- $o->{interactive} = "newt";
- }
- require"install_steps_$o->{interactive}.pm" if $o->{interactive}; #- no space to skip perl2fcalls
-
- #- needed before accessing floppy (in case of usb floppy)
- $::noauto or modules::load_category('bus/usb');
-
- #- patch should be read after defcfg in order to take precedance.
- eval { $o = $::o = install_any::loadO($o, $cfg) } if $cfg;
- eval { $o = $::o = install_any::loadO($o, "patch") } if $patch;
-
- eval { modules::load("af_packet") };
-
- map_index {
- modules::add_alias("sound-slot-$::i", $_->{driver});
- } modules::probe_category('multimedia/sound');
-
- #- needed very early for install_steps_gtk
- eval { ($o->{mouse}, @{$o->{wacom} = []}) = mouse::detect() } unless $o->{nomouseprobe} || $o->{mouse};
-
- $o->{lang} = lang::set($o->{lang}) if $o->{lang} ne 'en_US'; #- mainly for defcfg
-
- start_i810fb();
-
- $o->{allowFB} = listlength(cat_("/proc/fb"));
-
- my $VERSION = cat__(install_any::getFile("VERSION")) or do { print "VERSION file missing\n"; sleep 5 };
- $o->{lnx4win} = 1 if $VERSION =~ /lnx4win/i;
- $o->{meta_class} = 'desktop' if $VERSION =~ /desktop/i;
- $o->{meta_class} = 'firewall' if $VERSION =~ /firewall/i;
- $o->{meta_class} = 'server' if $VERSION =~ /server/i;
- if ($::oem) {
- $o->{partitioning}{use_existing_root} = 1;
- $o->{compssListLevel} = 4;
- push @auto, 'selectInstallClass', 'doPartitionDisks', 'choosePackages', 'configureTimezone', 'exitInstall';
- }
-
- foreach (@auto) {
- my $s = $o->{steps}{/::(.*)/ ? $1 : $_} or next;
- $s->{auto} = $s->{hidden} = 1;
- }
-
- my $o_;
- while (1) {
- $o_ = $::auto_install ?
- install_steps_auto_install->new($o) :
- $o->{interactive} eq "stdio" ?
- install_steps_stdio->new($o) :
- $o->{interactive} eq "newt" ?
- install_steps_newt->new($o) :
- $o->{interactive} eq "gtk" ?
- install_steps_gtk->new($o) :
- die "unknown install type";
- $o_ and last;
-
- $o->{interactive} = "newt";
- require install_steps_newt;
- }
- $::o = $o = $o_;
-
- install_any::remove_unused() if common::usingRamdisk();
-
- #-the main cycle
- my $clicked = 0;
- MAIN: for ($o->{step} = $o->{steps}{first};; $o->{step} = getNextStep()) {
- $o->{steps}{$o->{step}}{entered}++;
- $o->enteringStep($o->{step});
- if ($o->{steps}{$o->{step}}{icon}) { $o->{icon} = $o->{steps}{$o->{step}}{icon} } else { undef $o->{icon} }
- eval {
- &{$install2::{$o->{step}}}($clicked || $o->{steps}{$o->{step}}{noauto},
- $o->{steps}{$o->{step}}{entered},
- $clicked ? 0 : $o->{steps}{$o->{step}}{auto});
- };
- my $err = $@;
- $o->kill_action;
- $clicked = 0;
- if ($err) {
- local $_ = $err;
- $o->kill_action;
- if (/^setstep (.*)/) {
- $o->{step} = $1;
- $o->{steps}{$1}{done} = 0;
- $clicked = 1;
- redo MAIN;
- }
- /^theme_changed$/ and redo MAIN;
- unless (/^already displayed/) {
- eval { $o->errorInStep($_) };
- $o->{steps}{$o->{step}}{auto} = 0;
- $err = $@;
- $err and next;
- }
- $o->{step} = $o->{steps}{$o->{step}}{onError};
- next MAIN unless $o->{steps}{$o->{step}}{reachable}; #- sanity check: avoid a step not reachable on error.
- redo MAIN;
- }
- $o->{steps}{$o->{step}}{done} = 1;
- $o->leavingStep($o->{step});
-
- last if $o->{step} eq 'exitInstall';
- }
- install_any::clean_postinstall_rpms();
- install_any::log_sizes($o);
- install_any::remove_advertising($o);
- install_any::write_fstab($o);
- modules::write_conf($o->{prefix});
-
- #- mainly for auto_install's
- #- do not use run_program::xxx because it doesn't leave stdin/stdout unchanged
- system("bash", "-c", $o->{postInstallNonRooted}) if $o->{postInstallNonRooted};
- system("chroot", $o->{prefix}, "bash", "-c", $o->{postInstall}) if $o->{postInstall};
-
- install_any::ejectCdrom();
-
- #- to ensure linuxconf doesn't cry against those files being in the future
- foreach ('/etc/modules.conf', '/etc/crontab', '/etc/sysconfig/mouse', '/etc/sysconfig/network', '/etc/X11/fs/config') {
- my $now = time - 24 * 60 * 60;
- utime $now, $now, "$o->{prefix}/$_";
- }
- $::live or install_any::killCardServices();
-
- #- make sure failed upgrade will not hurt too much.
- install_steps::cleanIfFailedUpgrade($o);
-
- -e "$o->{prefix}/usr/sbin/urpmi.update" or eval { rm_rf("$o->{prefix}/var/lib/urpmi") };
-
- #- copy latest log files
- eval { cp_af("/tmp/$_", "$o->{prefix}/root/drakx") foreach qw(ddebug.log stage1.log) };
-
- #- ala pixel? :-) [fpons]
- common::sync(); common::sync();
-
- log::l("installation complete, leaving");
- log::l("files still open by install2: ", readlink($_)) foreach glob_("/proc/self/fd/*");
- print "\n" x 80;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
deleted file mode 100644
index 4e5bff38b..000000000
--- a/perl-install/install_any.pm
+++ /dev/null
@@ -1,1152 +0,0 @@
-package install_any; # $Id$
-
-use diagnostics;
-use strict;
-
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK $boot_medium @advertising_images);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
- all => [ qw(getNextStep spawnShell addToBeDone) ],
-);
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use run_program;
-use partition_table qw(:types);
-use partition_table_raw;
-use devices;
-use fsedit;
-use modules;
-use detect_devices;
-use lang;
-use any;
-use log;
-use fs;
-
-#- boot medium (the first medium to take into account).
-$boot_medium = 1;
-
-#-######################################################################################
-#- Media change variables&functions
-#-######################################################################################
-my $postinstall_rpms = '';
-my $current_medium = $boot_medium;
-my $asked_medium = $boot_medium;
-my $cdrom = undef;
-sub useMedium($) {
- #- before ejecting the first CD, there are some files to copy!
- #- does nothing if the function has already been called.
- $_[0] > 1 and $::o->{method} eq 'cdrom' and setup_postinstall_rpms($::o->{prefix}, $::o->{packages});
-
- $asked_medium eq $_[0] or log::l("selecting new medium '$_[0]'");
- $asked_medium = $_[0];
-}
-sub changeMedium($$) {
- my ($method, $medium) = @_;
- log::l("change to medium $medium for method $method (refused by default)");
- 0;
-}
-sub relGetFile($) {
- local $_ = $_[0];
- m|\.rpm$| ? "$::o->{packages}{mediums}{$asked_medium}{rpmsdir}/$_" : $_;
-}
-sub askChangeMedium($$) {
- my ($method, $medium) = @_;
- my $allow;
- do {
- eval { $allow = changeMedium($method, $medium) };
- } while ($@); #- really it is not allowed to die in changeMedium!!! or install will cores with rpmlib!!!
- log::l($allow ? "accepting medium $medium" : "refusing medium $medium");
- $allow;
-}
-sub errorOpeningFile($) {
- my ($file) = @_;
- $file eq 'XXX' and return; #- special case to force closing file after rpmlib transaction.
- $current_medium eq $asked_medium and log::l("errorOpeningFile $file"), return; #- nothing to do in such case.
- $::o->{packages}{mediums}{$asked_medium}{selected} or return; #- not selected means no need for worying about.
-
- my $max = 32; #- always refuse after $max tries.
- if ($::o->{method} eq "cdrom") {
- cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
- return unless $cdrom;
- ejectCdrom($cdrom);
- while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
- $current_medium = $asked_medium;
- eval { fs::mount($cdrom, "/tmp/image", "iso9660", 'readonly') };
- my $getFile = getFile($file);
- $getFile && @advertising_images and copy_advertising($::o);
- $getFile and return $getFile;
- $current_medium = 'unknown'; #- don't know what CD is inserted now.
- ejectCdrom($cdrom);
- --$max;
- }
- } else {
- while ($max > 0 && askChangeMedium($::o->{method}, $asked_medium)) {
- $current_medium = $asked_medium;
- my $getFile = getFile($file); $getFile and return $getFile;
- $current_medium = 'unknown'; #- don't know what CD image has been copied.
- --$max;
- }
- }
-
- #- keep in mind the asked medium has been refused on this way.
- #- this means it is no more selected.
- $::o->{packages}{mediums}{$asked_medium}{selected} = undef;
-
- #- on cancel, we can expect the current medium to be undefined too,
- #- this enable remounting if selecting a package back.
- $current_medium = 'unknown';
-
- return;
-}
-sub getFile {
- my ($f, $method) = @_;
- log::l("getFile $f:$method");
- my $rel = relGetFile($f);
- do {
- if ($f =~ m|^http://|) {
- require http;
- http::getFile($f);
- } elsif ($method =~ /crypto|update/i) {
- require crypto;
- crypto::getFile($f);
- } elsif ($::o->{method} eq "ftp") {
- require ftp;
- ftp::getFile($rel);
- } elsif ($::o->{method} eq "http") {
- require http;
- http::getFile("$ENV{URLPREFIX}/$rel");
- } else {
- #- try to open the file, but examine if it is present in the repository, this allow
- #- handling changing a media when some of the file on the first CD has been copied
- #- to other to avoid media change...
- my $f2 = "$postinstall_rpms/$f";
- $f2 = "/tmp/image/$rel" unless $postinstall_rpms && -e $f2;
- open GETFILE, $f2 and *GETFILE;
- }
- } || errorOpeningFile($f);
-}
-sub getAndSaveFile {
- my ($file, $local) = @_ == 1 ? ("Mandrake/mdkinst$_[0]", $_[0]) : @_;
- local *F; open F, ">$local" or return;
- local $/ = \ (16 * 1024);
- my $f = ref($file) ? $file : getFile($file) or return;
- local $_;
- while (<$f>) { syswrite F, $_ }
- 1;
-}
-
-
-#-######################################################################################
-#- Post installation RPMS from cdrom only, functions
-#-######################################################################################
-sub setup_postinstall_rpms($$) {
- my ($prefix, $packages) = @_;
-
- $postinstall_rpms and return;
- $postinstall_rpms = "$prefix/usr/postinstall-rpm";
-
- require pkgs;
-
- log::l("postinstall rpms directory set to $postinstall_rpms");
- clean_postinstall_rpms(); #- make sure in case of previous upgrade problem.
- mkdir_p($postinstall_rpms);
-
- my %toCopy;
- #- compute closure of package that may be copied, use INSTALL category
- #- in rpmsrate.
- foreach (@{$packages->{needToCopy} || []}) {
- my $p = pkgs::packageByName($packages, $_);
- pkgs::selectPackage($packages, $p, 0, \%toCopy);
- }
-
- my @toCopy = grep { $_ && !$_->flag_selected } map { pkgs::packageByName($packages, $_) } keys %toCopy;
-
- #- extract headers of package, this is necessary for getting
- #- the complete filename of each package.
- #- copy the package files in the postinstall RPMS directory.
- #- last arg is default medium '' known as the CD#1.
- #- cp_af doesn't handle correctly a missing file.
- eval { cp_af((grep { -r $_ } map { "/tmp/image/" . relGetFile(pkgs::packageFile($_)) } @toCopy), $postinstall_rpms) };
-
- log::l("copying Auto Install Floppy");
- getAndSaveInstallFloppy($::o, "$postinstall_rpms/auto_install.img");
-}
-
-sub clean_postinstall_rpms() {
- $postinstall_rpms and -d $postinstall_rpms and rm_rf($postinstall_rpms);
-}
-
-
-#-######################################################################################
-#- Specific Hardware to take into account and associated rpms to install
-#-######################################################################################
-sub allowNVIDIA_rpms {
- my ($packages) = @_;
- require pkgs;
- if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
- #- at this point, we can allow using NVIDIA 3D acceleration packages.
- my @rpms;
- foreach (keys %{$packages->{names}}) {
- my ($ext, $version, $release) = /kernel[^-]*(-smp|-enterprise|-secure)?(?:-(\d.*?)\.(\d+mdk))?$/ or next;
- my $p = pkgs::packageByName($packages, $_);
- pkgs::packageSelectedOrInstalled($p) or next;
- $version or ($version, $release) = (pkgs::packageVersion($p), pkgs::packageRelease($p));
- my $name = "NVIDIA_kernel-$version-$release$ext";
- pkgs::packageByName($packages, $name) or return;
- push @rpms, $name;
- }
- @rpms > 0 or return;
- return [ @rpms, "NVIDIA_GLX" ];
- }
-}
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub kernelVersion {
- my ($o) = @_;
- my $kernel = readlink "$o->{prefix}/boot/vmlinuz" || first(all("$o->{prefix}/boot"));
- first($kernel =~ /vmlinuz-(.*)/);
-}
-
-
-sub getNextStep {
- my ($s) = $::o->{steps}{first};
- $s = $::o->{steps}{$s}{next} while $::o->{steps}{$s}{done} || !$::o->{steps}{$s}{reachable};
- $s;
-}
-
-sub spawnShell {
- return if $::o->{localInstall} || $::testing;
-
- -x "/bin/sh" or die "cannot open shell - /bin/sh doesn't exist";
-
- fork and return;
-
- $ENV{DISPLAY} ||= ":0"; #- why not :pp
-
- local *F;
- sysopen F, "/dev/tty2", 2 or die "cannot open /dev/tty2 -- no shell will be provided";
-
- open STDIN, "<&F" or die '';
- open STDOUT, ">&F" or die '';
- open STDERR, ">&F" or die '';
- close F;
-
- print any::drakx_version(), "\n";
-
- c::setsid();
-
- ioctl(STDIN, c::TIOCSCTTY(), 0) or warn "could not set new controlling tty: $!";
-
- my $busybox = "/usr/bin/busybox";
- exec {-e $busybox ? $busybox : "/bin/sh"} "/bin/sh" or log::l("exec of /bin/sh failed: $!");
-}
-
-sub getAvailableSpace {
- my ($o) = @_;
-
- #- make sure of this place to be available for installation, this could help a lot.
- #- currently doing a very small install use 36Mb of postinstall-rpm, but installing
- #- these packages may eat up to 90Mb (of course not all the server may be installed!).
- #- 65mb may be a good choice to avoid almost all problem of insuficient space left...
- my $minAvailableSize = 65 * sqr(1024);
-
- my $n = !$::testing && getAvailableSpace_mounted($o->{prefix}) ||
- getAvailableSpace_raw($o->{fstab}) * 512 / 1.07;
- $n - max(0.1 * $n, $minAvailableSize);
-}
-
-sub getAvailableSpace_mounted {
- my ($prefix) = @_;
- my $dir = -d "$prefix/usr" ? "$prefix/usr" : "$prefix";
- my (undef, $free) = MDK::Common::System::df($dir) or return;
- log::l("getAvailableSpace_mounted $free KB");
- $free * 1024 || 1;
-}
-sub getAvailableSpace_raw {
- my ($fstab) = @_;
-
- do { $_->{mntpoint} eq '/usr' and return $_->{size} } foreach @$fstab;
- do { $_->{mntpoint} eq '/' and return $_->{size} } foreach @$fstab;
-
- if ($::testing) {
- my $nb = 450;
- log::l("taking ${nb}MB for testing");
- return $nb << 11;
- }
- die "missing root partition";
-}
-
-sub preConfigureTimezone {
- my ($o) = @_;
- require timezone;
-
- #- can't be done in install cuz' timeconfig %post creates funny things
- add2hash($o->{timezone}, { timezone::read($o->{prefix}) }) if $o->{isUpgrade};
-
- $o->{timezone}{timezone} ||= timezone::bestTimezone(lang::lang2text($o->{lang}));
-
- my $utc = $::expert && !grep { isFat($_) || isNT($_) } @{$o->{fstab}};
- my $ntp = timezone::ntp_server($o->{prefix});
- add2hash_($o->{timezone}, { UTC => $utc, ntp => $ntp });
-}
-
-sub setPackages {
- my ($o) = @_;
-
- require pkgs;
- if (!$o->{packages} || is_empty_hash_ref($o->{packages}{names})) {
- $o->{packages} = pkgs::psUsingHdlists($o->{prefix}, $o->{method});
-
- pkgs::getDeps($o->{prefix}, $o->{packages});
- pkgs::selectPackage($o->{packages},
- pkgs::packageByName($o->{packages}, 'basesystem') || die("missing basesystem package"), 1);
-
- #- must be done after selecting base packages (to save memory)
- pkgs::getProvides($o->{packages});
-
- #- must be done after getProvides
- pkgs::read_rpmsrate($o->{packages}, getFile("Mandrake/base/rpmsrate"));
- ($o->{compssUsers}, $o->{compssUsersSorted}) = pkgs::readCompssUsers($o->{meta_class});
-
- #- preselect default_packages and compssUsersChoices.
- setDefaultPackages($o);
- } else {
- #- this has to be done to make sure necessary files for urpmi are
- #- present.
- pkgs::psUpdateHdlistsDeps($o->{prefix}, $o->{method}, $o->{packages});
- }
-}
-
-sub setDefaultPackages {
- my ($o, $clean) = @_;
-
- if ($clean) {
- delete $o->{$_} foreach qw(default_packages compssUsersChoice); #- clean modified variables.
- }
-
- push @{$o->{default_packages}}, "nfs-utils-clients" if $o->{method} eq "nfs";
- push @{$o->{default_packages}}, "numlock" if $o->{miscellaneous}{numlock};
- push @{$o->{default_packages}}, "kernel22" if !$::oem && c::kernel_version() =~ /^\Q2.2/;
- push @{$o->{default_packages}}, "raidtools" if !is_empty_array_ref($o->{all_hds}{raids});
- push @{$o->{default_packages}}, "lvm" if !is_empty_array_ref($o->{all_hds}{lvms});
- push @{$o->{default_packages}}, "alsa", "alsa-utils" if modules::get_alias("sound-slot-0") =~ /^snd-card-/;
- push @{$o->{default_packages}}, uniq(grep {$_} map { fsedit::package_needed_for_partition_type($_) } @{$o->{fstab}});
-
- #- if no cleaning needed, populate by default, clean is used for second or more call to this function.
- unless ($clean) {
- if ($::auto_install && ($o->{compssUsersChoice} || {})->{ALL}) {
- $o->{compssUsersChoice}{$_} = 1 foreach map { @{$o->{compssUsers}{$_}{flags}} } @{$o->{compssUsersSorted}};
- }
- if (!$o->{compssUsersChoice} && !$o->{isUpgrade}) {
- #- by default, choose:
- if ($o->{meta_class} eq 'server') {
- $o->{compssUsersChoice}{$_} = 1 foreach 'X', 'MONITORING', 'NETWORKING_REMOTE_ACCESS_SERVER';
- } else {
- $o->{compssUsersChoice}{$_} = 1 foreach 'GNOME', 'KDE', 'CONFIG', 'X';
- $o->{lang} eq 'eu_ES' and $o->{compssUsersChoice}{KDE} = 0;
- $o->{compssUsersChoice}{$_} = 1
- foreach map { @{$o->{compssUsers}{$_}{flags}} } 'Workstation|Office Workstation', 'Workstation|Internet station';
- }
- }
- }
- $o->{compssUsersChoice}{uc($_)} = 1 foreach grep { modules::probe_category("multimedia/$_") } modules::sub_categories('multimedia');
- $o->{compssUsersChoice}{uc($_)} = 1 foreach map { $_->{driver} =~ /Flag:(.*)/ } detect_devices::probeall();
- $o->{compssUsersChoice}{SYSTEM} = 1;
- $o->{compssUsersChoice}{DOCS} = !$o->{excludedocs};
- $o->{compssUsersChoice}{BURNER} = 1 if detect_devices::burners();
- $o->{compssUsersChoice}{DVD} = 1 if detect_devices::dvdroms();
- $o->{compssUsersChoice}{USB} = 1 if modules::get_alias("usb-interface");
- $o->{compssUsersChoice}{PCMCIA} = 1 if detect_devices::hasPCMCIA();
- $o->{compssUsersChoice}{HIGH_SECURITY} = 1 if $o->{security} > 3;
- $o->{compssUsersChoice}{BIGMEM} = 1 if !$::oem && (availableRamMB() > 800) && (arch() !~ /ia64/);
- $o->{compssUsersChoice}{SMP} = 1 if detect_devices::hasSMP();
- $o->{compssUsersChoice}{'3D'} = 1 if
- detect_devices::matching_desc('Matrox.* G[245][05]0') ||
- detect_devices::matching_desc('Rage X[CL]') ||
- detect_devices::matching_desc('3D Rage (?:LT|Pro)') ||
- detect_devices::matching_desc('Voodoo [35]') ||
- detect_devices::matching_desc('Voodoo Banshee') ||
- detect_devices::matching_desc('8281[05].* CGC') ||
- detect_devices::matching_desc('Rage 128') ||
- detect_devices::matching_desc('Radeon ') && !detect_devices::matching_desc('Radeon 8500') ||
- detect_devices::matching_desc('[nN]Vidia.*T[nN]T2') || #- TNT2 cards
- detect_devices::matching_desc('[nN]Vidia.*NV[56]') ||
- detect_devices::matching_desc('[nN]Vidia.*Vanta') ||
- detect_devices::matching_desc('[nN]Vidia.*GeForce') || #- GeForce cards
- detect_devices::matching_desc('[nN]Vidia.*NV1[15]') ||
- detect_devices::matching_desc('[nN]Vidia.*Quadro');
-
-
- foreach (map { substr($_, 0, 2) } lang::langs($o->{langs})) {
- pkgs::packageByName($o->{packages}, "locales-$_") or next;
- push @{$o->{default_packages}}, "locales-$_";
- $o->{compssUsersChoice}{qq(LOCALES"$_")} = 1; #- mainly for zh in case of zh_TW.Big5
- }
- foreach (lang::langsLANGUAGE($o->{langs})) {
- $o->{compssUsersChoice}{qq(LOCALES"$_")} = 1;
- }
- $o->{compssUsersChoice}{'CHARSET"' . lang::lang2charset($o->{lang}) . '"'} = 1;
-}
-
-sub unselectMostPackages {
- my ($o) = @_;
- pkgs::unselectAllPackages($o->{packages});
- pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || next) foreach @{$o->{default_packages}};
-}
-
-sub warnAboutNaughtyServers {
- my ($o) = @_;
- my @naughtyServers = pkgs::naughtyServers($o->{packages}) or return 1;
- if (!$o->ask_yesorno('',
-formatAlaTeX(_("You have selected the following server(s): %s
-
-
-These servers are activated by default. They don't have any known security
-issues, but some new could be found. In that case, you must make sure to upgrade
-as soon as possible.
-
-
-Do you really want to install these servers?
-", join(", ", @naughtyServers))), 1)) {
- pkgs::unselectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_)) foreach @naughtyServers;
- }
-}
-
-sub addToBeDone(&$) {
- my ($f, $step) = @_;
-
- return &$f() if $::o->{steps}{$step}{done};
-
- push @{$::o->{steps}{$step}{toBeDone}}, $f;
-}
-
-sub setAuthentication {
- my ($o) = @_;
- my ($shadow, $md5, $ldap, $nis) = @{$o->{authentication} || {}}{qw(shadow md5 LDAP NIS)};
- my $p = $o->{prefix};
- #- obsoleted always enabled (in /etc/pam.d/system-auth furthermore) #any::enableMD5Shadow($p, $shadow, $md5);
- any::enableShadow($p) if $shadow;
- if ($ldap) {
- $o->pkg_install(qw(chkauth openldap-clients nss_ldap pam_ldap));
- run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "ldap", "-D", $o->{netc}{LDAPDOMAIN}, "-s", $ldap);
- } elsif ($nis) {
- #$o->pkg_install(qw(chkauth ypbind yp-tools net-tools));
- #run_program::rooted($o->{prefix}, "/usr/sbin/chkauth", "yp", $domain, "-s", $nis);
- $o->pkg_install("ypbind");
- my $domain = $o->{netc}{NISDOMAIN};
- $domain || $nis ne "broadcast" or die _("Can't use broadcast with no NIS domain");
- my $t = $domain ? "domain $domain" . ($nis ne "broadcast" && " server")
- : "ypserver";
- substInFile {
- $_ = "#~$_" unless /^#/;
- $_ .= "$t $nis\n" if eof;
- } "$p/etc/yp.conf";
- require network;
- network::write_conf("$p/etc/sysconfig/network", $o->{netc});
- }
-}
-
-sub killCardServices {
- my $pid = chomp_(cat_("/tmp/cardmgr.pid"));
- $pid and kill(15, $pid); #- send SIGTERM
-}
-
-sub unlockCdrom(;$) {
- my ($cdrom) = @_;
- $cdrom or cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
- eval { $cdrom and ioctl detect_devices::tryOpen($1), c::CDROM_LOCKDOOR(), 0 };
-}
-sub ejectCdrom(;$) {
- my ($cdrom) = @_;
- getFile("XXX"); #- close still opened filehandle
- $cdrom ||= $1 if cat_("/proc/mounts") =~ m,(/(?:dev|tmp)/\S+)\s+(?:/mnt/cdrom|/tmp/image),;
- if ($cdrom) {
- #- umount BEFORE opening the cdrom device otherwise the umount will
- #- D state if the cdrom is already removed
- eval { fs::umount("/tmp/image") };
- if ($@) { log::l("files still open: ", readlink($_)) foreach map { glob_("$_/fd/*") } glob_("/proc/*") }
- eval { ioctl detect_devices::tryOpen($cdrom), c::CDROMEJECT(), 1 };
- }
-}
-
-sub setupFB {
- my ($o, $vga) = @_;
-
- $vga ||= 785; #- assume at least 640x480x16.
-
- require bootloader;
- #- update bootloader entries with vga, all kernel are now framebuffer.
- foreach (qw(vmlinuz vmlinuz-secure vmlinuz-smp vmlinuz-hack)) {
- if (my $e = bootloader::get("/boot/$_", $o->{bootloader})) {
- $e->{vga} = $vga;
- }
- }
- bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{all_hds}{hds});
- 1;
-}
-
-sub hdInstallPath() {
- my $tail = first(readlink("/tmp/image") =~ m|^/tmp/hdimage/(.*)|);
- my $head = first(readlink("/tmp/hdimage") =~ m|$::o->{prefix}(.*)|);
- $tail && ($head ? "$head/$tail" : "/mnt/hd/$tail");
-}
-
-sub install_urpmi {
- my ($prefix, $method, $mediums) = @_;
-
- #- rare case where urpmi cannot be installed (no hd install path).
- $method eq 'disk' && !hdInstallPath() and return;
-
- my @cfg = map {
- my $name = $_->{fakemedium};
-
- local *LIST;
- my $mask = umask 077;
- open LIST, ">$prefix/var/lib/urpmi/list.$name" or log::l("failed to write list.$name");
- umask $mask;
-
- my $dir = ($_->{prefix} || ${{ nfs => "file://mnt/nfs",
- disk => "file:/" . hdInstallPath(),
- ftp => $ENV{URLPREFIX},
- http => $ENV{URLPREFIX},
- cdrom => "removable://mnt/cdrom" }}{$method}) . "/$_->{rpmsdir}";
-
- local *FILES; open FILES, "$ENV{LD_LOADER} parsehdlist /tmp/$_->{hdlist} |";
- print LIST "$dir/$_\n" foreach chomp_(<FILES>);
- close FILES or log::l("parsehdlist failed"), return;
- close LIST;
-
- #- build synthesis file if there are still not existing (ie not copied from mirror).
- if (-s "$prefix/var/lib/urpmi/synthesis.hdlist.$name.cz" <= 32) {
- unlink "$prefix/var/lib/urpmi/synthesis.hdlist.$name.cz";
- run_program::rooted($prefix, "parsehdlist", ">", "/var/lib/urpmi/synthesis.hdlist.$name",
- "--synthesis", "/var/lib/urpmi/hdlist.$name.cz");
- run_program::rooted($prefix, "gzip", "-S", ".cz", "/var/lib/urpmi/synthesis.hdlist.$name");
- }
-
- my ($qname, $qdir) = ($name, $dir);
- $qname =~ s/(\s)/\\$1/g; $qdir =~ s/(\s)/\\$1/g;
-
- #- output new urpmi.cfg format here.
- "$qname " . ($dir !~ /^(ftp|http)/ && $qdir) . " {
- hdlist: hdlist.$name.cz
- with_hdlist: ../base/" . ($_->{update} ? "hdlist.cz" : $_->{hdlist}) . "
- list: list.$name" . ($dir =~ /removable:/ && "
- removable: /dev/cdrom") . ($_->{update} && "
- update") . "
-}
-
-";
- } sort { $a->{medium} <=> $b->{medium} } values %$mediums;
- eval { output "$prefix/etc/urpmi/urpmi.cfg", @cfg };
-}
-
-
-#-###############################################################################
-#- kde stuff
-#-###############################################################################
-sub kderc_largedisplay {
- my ($prefix) = @_;
-
- update_gnomekderc($_, 'KDE',
- Contrast => 7,
- kfmIconStyle => "Large",
- kpanelIconStyle => "Normal", #- to change to Large when icons looks better
- KDEIconStyle => "Large") foreach list_skels($prefix, '.kderc');
-
- substInFile {
- s/^(GridWidth)=85/$1=100/;
- s/^(GridHeight)=70/$1=75/;
- } $_ foreach list_skels($prefix, '.kde/share/config/kfmrc');
-}
-
-sub kdeicons_postinstall {
- my ($prefix) = @_;
-
- #- parse etc/fstab file to search for dos/win, floppy, zip, cdroms icons.
- #- handle both supermount and fsdev usage.
- my %l = (
- 'cdrom' => [ 'cdrom', 'Cd-Rom' ],
- 'zip' => [ 'zip', 'Zip' ],
- 'floppy-ls' => [ 'floppy', 'LS-120' ],
- 'floppy' => [ 'floppy', 'Floppy' ],
- );
- foreach (fs::read_fstab($prefix, "/etc/fstab")) {
-
- my ($name_, $nb) = $_->{mntpoint} =~ m|.*/(\S+?)(\d*)$/|;
- my ($name, $text) = @{$l{$name_} || []};
-
- my $f = ${{
- supermount => sub { $name .= '.fsdev' if $name },
- vfat => sub { $name = 'Dos_'; $text = $name_ },
- }}{$_->{type}};
- &$f if $f;
-
- template2userfile($prefix,
- "$ENV{SHARE_PATH}/$name.kdelnk.in",
- "Desktop/$text" . ($nb && " $nb"). ".kdelnk",
- 1, %$_) if $name;
- }
-
- # rename the .kdelnk to the name found in the .kdelnk as kde doesn't use it
- # for displaying
- foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
- foreach (grep { /\.kdelnk$/ } all($dir)) {
- cat_("$dir/$_") =~ /^Name\[\Q$ENV{LANG}\E\]=(.{2,14})$/m
- and rename "$dir/$_", "$dir/$1.kdelnk";
- }
- }
-}
-
-sub kdemove_desktop_file {
- my ($prefix) = @_;
- my @toMove = qw(doc.kdelnk news.kdelnk updates.kdelnk home.kdelnk printer.kdelnk floppy.kdelnk cdrom.kdelnk FLOPPY.kdelnk CDROM.kdelnk);
-
- #- remove any existing save in Trash of each user and
- #- move appropriate file there after an upgrade.
- foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
- renamef("$dir/$_", "$dir/Trash/$_")
- foreach grep { -e "$dir/$_" } @toMove, grep { /\.rpmorig$/ } all($dir)
- }
-}
-
-
-#-###############################################################################
-#- auto_install stuff
-#-###############################################################################
-sub auto_inst_file() { ($::g_auto_install ? "/tmp" : "$::o->{prefix}/root/drakx") . "/auto_inst.cfg.pl" }
-
-sub report_bug {
- my ($prefix) = @_;
- any::report_bug($prefix, 'auto_inst' => g_auto_install('', 1));
-}
-
-sub g_auto_install {
- my ($replay, $respect_privacy) = @_;
- my $o = {};
-
- require pkgs;
- $o->{default_packages} = pkgs::selected_leaves($::o->{packages});
-
- my @fields = qw(mntpoint type size);
- $o->{partitions} = [ map { my %l; @l{@fields} = @$_{@fields}; \%l } grep { $_->{mntpoint} } @{$::o->{fstab}} ];
-
- exists $::o->{$_} and $o->{$_} = $::o->{$_} foreach qw(lang authentication mouse wacom netc timezone superuser intf keyboard users partitioning isUpgrade manualFstab nomouseprobe crypto security netcnx useSupermount autoExitInstall mkbootdisk); #- TODO modules bootloader
-
- if (my $printer = $::o->{printer}) {
- $o->{printer}{$_} = $::o->{printer}{$_} foreach qw(SPOOLER DEFAULT BROWSEPOLLADDR BROWSEPOLLPORT MANUALCUPSCONFIG);
- $o->{printer}{configured} = {};
- foreach my $queue (keys %{$::o->{printer}{configured}}) {
- my $val = $::o->{printer}{configured}{$queue}{queuedata};
- exists $val->{$_} and $o->{printer}{configured}{$queue}{queuedata}{$_} = $val->{$_} foreach keys %{$val || {}};
- }
- }
-
- if (my $card = $::o->{X}{card}) {
- $o->{X}{$_} = $::o->{X}{$_} foreach qw(default_depth resolution_wanted);
- if ($o->{X}{default_depth} and my $depth = $card->{depth}{$o->{X}{default_depth}}) {
- $depth ||= [];
- $o->{X}{resolution_wanted} ||= join "x", @{$depth->[0]} unless is_empty_array_ref($depth->[0]);
- $o->{X}{monitor} = $::o->{X}{monitor} if $::o->{X}{monitor}{manual};
- }
- }
-
- local $o->{partitioning}{auto_allocate} = !$replay;
- $o->{autoExitInstall} = !$replay;
- $o->{interactiveSteps} = [ 'doPartitionDisks', 'formatPartitions'] if $replay;
-
- #- deep copy because we're modifying it below
- $o->{users} = [ @{$o->{users} || []} ];
-
- my @user_info_to_remove = (
- if_($respect_privacy, qw(name realname home pw)),
- qw(oldu oldg password password2),
- );
- $_ = { %{$_ || {}} }, delete @$_{@user_info_to_remove} foreach $o->{superuser}, @{$o->{users} || []};
-
- if ($respect_privacy && $o->{netcnx}) {
- if (my $type = $o->{netcnx}{type}) {
- my @netcnx_type_to_remove = qw(passwd passwd2 login phone_in phone_out);
- $_ = { %{$_ || {}} }, delete @$_{@netcnx_type_to_remove} foreach $o->{netcnx}{$type};
- }
- }
-
- require Data::Dumper;
- my $str = join('',
-"#!/usr/bin/perl -cw
-#
-# You should check the syntax of this file before using it in an auto-install.
-# You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file
-# (note the '#!/usr/bin/perl -cw' on the first line).
-", Data::Dumper->Dump([$o], ['$o']), "\0");
- $str =~ s/ {8}/\t/g; #- replace all 8 space char by only one tabulation, this reduces file size so much :-)
- $str;
-}
-
-sub getAndSaveInstallFloppy {
- my ($o, $where) = @_;
- if ($postinstall_rpms && -d $postinstall_rpms && -r "$postinstall_rpms/auto_install.img") {
- log::l("getAndSaveInstallFloppy: using file saved as $postinstall_rpms/auto_install.img");
- cp_af("$postinstall_rpms/auto_install.img", $where);
- } else {
- my $image = cat_("/proc/cmdline") =~ /pcmcia/ ? "pcmcia" :
- ${{ disk => 'hd', cdrom => 'cdrom', ftp => 'network', nfs => 'network', http => 'network' }}{$o->{method}};
- $image .= arch() =~ /sparc64/ && "64"; #- for sparc64 there are a specific set of image.
- getAndSaveFile("images/$image.img", $where) or log::l("failed to write Install Floppy ($image.img) to $where"), return;
- }
- 1;
-}
-
-sub getAndSaveAutoInstallFloppy {
- my ($o, $replay, $where) = @_;
-
- eval { modules::load('loop') };
-
- if (arch() =~ /sparc/) {
- my $imagefile = "$o->{prefix}/tmp/autoinst.img";
- my $mountdir = "$o->{prefix}/tmp/mount"; -d $mountdir or mkdir $mountdir, 0755;
- my $workdir = "$o->{prefix}/tmp/work"; -d $workdir or rmdir $workdir;
-
- getAndSaveInstallFloppy($o, $imagefile) or return;
- devices::make($_) foreach qw(/dev/loop6 /dev/ram);
-
- run_program::run("losetup", "/dev/loop6", $imagefile);
- fs::mount("/dev/loop6", $mountdir, "romfs", 'readonly');
- cp_af($mountdir, $workdir);
- fs::umount($mountdir);
- run_program::run("losetup", "-d", "/dev/loop6");
-
- substInFile { s/timeout.*//; s/^(\s*append\s*=\s*\".*)\"/$1 kickstart=floppy\"/ } "$workdir/silo.conf"; #" for po
-#-TODO output "$workdir/ks.cfg", generate_ks_cfg($o);
- output "$workdir/boot.msg", "\n7m",
-"!! If you press enter, an auto-install is going to start.
- ALL data on this computer is going to be lost,
- including any Windows partitions !!
-", "7m\n";
-
- local $o->{partitioning}{clearall} = 1;
- output("$workdir/auto_inst.cfg", g_auto_install());
-
- run_program::run("genromfs", "-d", $workdir, "-f", "/dev/ram", "-A", "2048,/..", "-a", "512", "-V", "DrakX autoinst");
- fs::mount("/dev/ram", $mountdir, 'romfs', 0);
- run_program::run("silo", "-r", $mountdir, "-F", "-i", "/fd.b", "-b", "/second.b", "-C", "/silo.conf");
- fs::umount($mountdir);
- require commands;
- commands::dd("if=/dev/ram", "of=$where", "bs=1440", "count=1024");
-
- rm_rf($workdir, $mountdir, $imagefile);
- } elsif (arch() =~ /ia64/) {
- #- nothing yet
- } else {
- my $imagefile = "$o->{prefix}/root/autoinst.img";
- my $mountdir = "$o->{prefix}/root/aif-mount"; -d $mountdir or mkdir $mountdir, 0755;
-
- my $param = 'kickstart=floppy ' . generate_automatic_stage1_params($o);
-
- getAndSaveInstallFloppy($o, $imagefile) or return;
-
- my $dev = devices::set_loop($imagefile) or log::l("couldn't set loopback device"), return;
- fs::mount($dev, $mountdir, 'vfat', 0);
-
- substInFile {
- s/timeout.*/$replay ? 'timeout 1' : ''/e;
- s/^(\s*append)/$1 $param/
- } "$mountdir/syslinux.cfg";
-
- unlink "$mountdir/help.msg";
- output "$mountdir/boot.msg", "\n0c",
-"!! If you press enter, an auto-install is going to start.
- All data on this computer is going to be lost,
- including any Windows partitions !!
-", "07\n" if !$replay;
-
- local $o->{partitioning}{clearall} = !$replay;
- eval { output("$mountdir/auto_inst.cfg", g_auto_install($replay)); };
- $@ and log::l("Warning: <$@>");
-
- fs::umount($mountdir);
- rmdir $mountdir;
- devices::del_loop($dev);
- require commands;
- commands::dd("if=$imagefile", "of=$where", "bs=1440", "count=1024");
- unlink $imagefile;
- }
- 1;
-}
-
-
-sub g_default_packages {
- my ($o, $quiet) = @_;
-
- my $floppy = detect_devices::floppy();
-
- while (1) {
- $o->ask_okcancel('', _("Insert a FAT formatted floppy in drive %s", $floppy), 1) or return;
-
- eval { fs::mount(devices::make($floppy), "/floppy", "vfat", 0) };
- last if !$@;
- $o->ask_warn('', _("This floppy is not FAT formatted"));
- }
-
- require Data::Dumper;
- my $str = Data::Dumper->Dump([ { default_packages => pkgs::selected_leaves($o->{packages}) } ], ['$o']);
- $str =~ s/ {8}/\t/g;
- output('/floppy/auto_inst.cfg',
- "# You should always check the syntax with 'perl -cw auto_inst.cfg.pl'\n",
- "# before testing. To use it, boot with ``linux defcfg=floppy''\n",
- $str, "\0");
- fs::umount("/floppy");
-
- $quiet or $o->ask_warn('', _("To use this saved packages selection, boot installation with ``linux defcfg=floppy''"));
-}
-
-sub loadO {
- my ($O, $f) = @_; $f ||= auto_inst_file;
- my $o;
- if ($f =~ /^(floppy|patch)$/) {
- my $f = $f eq "floppy" ? 'auto_inst.cfg' : "patch";
- unless ($::testing) {
- fs::mount(devices::make(detect_devices::floppy()), "/mnt", (arch() =~ /sparc/ ? "romfs" : "vfat"), 'readonly');
- $f = "/mnt/$f";
- }
- -e $f or $f .= '.pl';
-
- my $b = before_leaving {
- fs::umount("/mnt") unless $::testing;
- modules::unload(qw(vfat fat));
- };
- $o = loadO($O, $f);
- } else {
- -e "$f.pl" and $f .= ".pl" unless -e $f;
-
- my $fh = -e $f ? do { local *F; open F, $f; *F } : getFile($f) or die _("Error reading file %s", $f);
- {
- local $/ = "\0";
- no strict;
- eval <$fh>;
- close $fh;
- $@ and die;
- }
- add2hash_($o ||= {}, $O);
- }
- bless $o, ref $O;
-}
-
-sub generate_automatic_stage1_params {
- my ($o) = @_;
-
- my @ks = "method:$o->{method}";
-
- if ($o->{method} eq 'http') {
- "$ENV{URLPREFIX}" =~ m|http://([^/:]+)/(.*)| or die;
- push @ks, "server:$1", "directory:$2";
- } elsif ($o->{method} eq 'ftp') {
- push @ks, "server:$ENV{HOST}", "directory:$ENV{PREFIX}", "user:$ENV{LOGIN}", "pass:$ENV{PASSWORD}";
- } elsif ($o->{method} eq 'nfs') {
- cat_("/proc/mounts") =~ m|(\S+):(\S+)\s+/tmp/image nfs| or die;
- push @ks, "server:$1", "directory:$2";
- }
-
- if (member($o->{method}, qw(http ftp nfs))) {
- my ($intf) = values %{$o->{intf}};
- push @ks, "interface:$intf->{DEVICE}";
- if ($intf->{BOOTPROTO} eq 'dhcp') {
- push @ks, "network:dhcp";
- } else {
- require network;
- push @ks, "network:static", "ip:$intf->{IPADDR}", "netmask:$intf->{NETMASK}", "gateway:$o->{netc}{GATEWAY}";
- my @dnss = network::dnsServers($o->{netc});
- push @ks, "dns:$dnss[0]" if @dnss;
- }
- }
-
- "automatic=".join(',', @ks);
-}
-
-sub guess_mount_point {
- my ($part, $prefix, $user) = @_;
-
- my %l = (
- '/' => 'etc/fstab',
- '/boot' => 'vmlinuz',
- '/tmp' => '.X11-unix',
- '/usr' => 'X11R6',
- '/var' => 'catman',
- );
-
- my $handle = any::inspect($part, $prefix) or return;
- my $d = $handle->{dir};
- my ($mnt) = grep { -e "$d/$l{$_}" } keys %l;
- $mnt ||= (stat("$d/.bashrc"))[4] ? '/root' : '/home/user' . ++$$user if -e "$d/.bashrc";
- $mnt ||= (grep { -d $_ && (stat($_))[4] >= 500 && -e "$_/.bashrc" } glob_("$d")) ? '/home' : '';
- ($mnt, $handle);
-}
-
-sub suggest_mount_points {
- my ($fstab, $prefix, $uniq) = @_;
-
- my $user;
- foreach my $part (grep { isTrueFS($_) } @$fstab) {
- $part->{mntpoint} && !$part->{unsafeMntpoint} and next; #- if already found via an fstab
-
- my ($mnt, $handle) = guess_mount_point($part, $prefix, \$user) or next;
-
- next if $uniq && fsedit::mntpoint2part($mnt, $fstab);
- $part->{mntpoint} = $mnt; delete $part->{unsafeMntpoint};
-
- #- try to find other mount points via fstab
- fs::merge_info_from_fstab($fstab, $handle->{dir}, $uniq, 'loose') if $mnt eq '/';
- }
- $_->{mntpoint} and log::l("suggest_mount_points: $_->{device} -> $_->{mntpoint}") foreach @$fstab;
-}
-
-#- mainly for finding the root partitions for upgrade
-sub find_root_parts {
- my ($fstab, $prefix) = @_;
- log::l("find_root_parts");
- my $user;
- grep {
- my ($mnt) = guess_mount_point($_, $prefix, \$user);
- $mnt eq '/';
- } @$fstab;
-}
-sub use_root_part {
- my ($all_hds, $part, $prefix) = @_;
- my $fstab = [ fsedit::get_really_all_fstab($all_hds) ];
- {
- my $handle = any::inspect($part, $prefix) or die;
- fs::merge_info_from_fstab($fstab, $handle->{dir}, 'uniq');
- }
- map { $_->{mntpoint} = 'swap' } grep { isSwap($_) } @$fstab; #- use all available swap.
-}
-
-sub getHds {
- my ($o, $f_err) = @_;
- my $ok = 1;
- my $try_scsi = !$::expert;
- my $flags = $o->{partitioning};
-
- my @drives = detect_devices::hds();
-# add2hash_($o->{partitioning}, { readonly => 1 }) if partition_table_raw::typeOfMBR($drives[0]{device}) eq 'system_commander';
-
- getHds:
- my $all_hds = catch_cdie { fsedit::hds(\@drives, $flags) }
- sub {
- $ok = 0;
- my $err = formatError($@);
- log::l("error reading partition table: $err");
- !$flags->{readonly} && $f_err and $f_err->($err);
- };
- my $hds = $all_hds->{hds};
-
- if (is_empty_array_ref($hds) && $try_scsi) {
- $try_scsi = 0;
- $o->setupSCSI; #- ask for an unautodetected scsi card
- goto getHds;
- }
- if (!$::testing) {
- @$hds = grep { eval { partition_table_raw::test_for_bad_drives($_) }; !$@ } @$hds;
- }
-
- $ok = fsedit::verifyHds($hds, $flags->{readonly}, $ok)
- if !($flags->{clearall} || $flags->{clear});
-
- #- try to figure out if the same number of hds is available, use them if ok.
- $ok && $hds && @$hds > 0 && @{$o->{all_hds}{hds} || []} == @$hds and return $ok;
-
- fs::get_raw_hds('', $all_hds);
- fs::add2all_hds($all_hds, @{$o->{manualFstab}});
-
- $o->{all_hds} = $all_hds;
- $o->{fstab} = [ fsedit::get_all_fstab($all_hds) ];
- fs::merge_info_from_mtab($o->{fstab});
-
- my @win = grep { isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) }) } @{$o->{fstab}};
- log::l("win parts: ", join ",", map { $_->{device} } @win) if @win;
- if (@win == 1) {
- #- Suggest /boot/efi on ia64.
- $win[0]{mntpoint} = arch() =~ /ia64/ ? "/boot/efi" : "/mnt/windows";
- } else {
- my %w; foreach (@win) {
- my $v = $w{$_->{device_windobe}}++;
- $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/win_" . lc($_->{device_windobe}) . ($v ? $v+1 : ''); #- lc cuz of StartOffice(!) cf dadou
- }
- }
-
- my @sunos = grep { isSunOS($_) && type2name($_->{type}) =~ /root/i } @{$o->{fstab}}; #- take only into account root partitions.
- if (@sunos) {
- my $v = '';
- map { $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/sunos" . ($v && ++$v) } @sunos;
- }
- #- a good job is to mount SunOS root partition, and to use mount point described here in /etc/vfstab.
-
- $ok;
-}
-
-sub log_sizes {
- my ($o) = @_;
- my @df = MDK::Common::System::df($o->{prefix});
- log::l(sprintf "Installed: %s(df), %s(rpm)",
- formatXiB($df[0] - $df[1], 1024),
- formatXiB(sum(`$ENV{LD_LOADER} rpm --root $o->{prefix}/ -qa --queryformat "%{size}\n"`))) if -x "$o->{prefix}/bin/rpm";
-}
-
-sub copy_advertising {
- my ($o) = @_;
-
- return if $::rootwidth < 800;
-
- my $f;
- my $source_dir = "Mandrake/share/advertising";
- foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
- $f = getFile("$source_dir$_/list") or next;
- $source_dir = "$source_dir$_";
- }
- if (my @files = <$f>) {
- my $dir = "$o->{prefix}/tmp/drakx-images";
- mkdir $dir;
- unlink glob_("$dir/*");
- foreach (@files) {
- chomp;
- getAndSaveFile("$source_dir/$_", "$dir/$_");
- s/\.png/\.pl/;
- getAndSaveFile("$source_dir/$_", "$dir/$_");
- s/\.pl/_icon\.png/;
- getAndSaveFile("$source_dir/$_", "$dir/$_");
- s/_icon\.png/\.png/;
- }
- @advertising_images = map { "$dir/$_" } @files;
- }
-}
-
-sub remove_advertising {
- my ($o) = @_;
- eval { rm_rf("$o->{prefix}/tmp/drakx-images") };
- @advertising_images = ();
-}
-
-sub disable_user_view {
- my ($prefix) = @_;
- substInFile { s/^UserView=.*/UserView=true/ } "$prefix/usr/share/config/kdm/kdmrc";
- substInFile { s/^Browser=.*/Browser=0/ } "$prefix/etc/X11/gdm/gdm.conf";
-}
-
-sub write_fstab {
- my ($o) = @_;
- fs::write_fstab($o->{all_hds}, $o->{prefix}) if !$::live;
-}
-
-my @bigseldom_used_groups = (
-);
-
-sub check_prog {
- my ($f) = @_;
-
- my @l = $f !~ m|^/| ?
- map { "$_/$f" } split(":", $ENV{PATH}) :
- $f;
- return if grep { -x $_ } @l;
-
- common::usingRamdisk() or log::l("ERROR: check_prog can't find the program $f and we're not using ramdisk"), return;
-
- my ($f_) = map { m|^/| ? $_ : "/usr/bin/$_" } $f;
- remove_bigseldom_used();
- foreach (@bigseldom_used_groups) {
- my (@l) = map { m|^/| ? $_ : "/usr/bin/$_" } @$_;
- if (member($f_, @l)) {
- foreach (@l) {
- getAndSaveFile($_);
- chmod 0755, $_;
- }
- return;
- }
- }
- getAndSaveFile($f_);
- chmod 0755, $f_;
-}
-
-sub remove_unused {
- $::testing and return;
- if ($::o->isa('interactive_gtk')) {
- unlink glob_("/lib/lib$_*") foreach qw(slang newt);
- unlink "/usr/bin/perl-install/auto/Newt/Newt.so";
- } else {
- unlink glob_("/usr/X11R6/bin/XF*");
- }
-}
-
-sub remove_bigseldom_used {
- log::l("remove_bigseldom_used");
- $::testing and return;
- remove_unused();
- unlink "/usr/X11R6/lib/modules/xf86Wacom.so";
- unlink glob_("/usr/share/gtk/themes/$_*") foreach qw(marble3d);
- unlink(m|^/| ? $_ : "/usr/bin/$_") foreach
- ((map { @$_ } @bigseldom_used_groups),
- qw(pvcreate pvdisplay vgchange vgcreate vgdisplay vgextend vgremove vgscan lvcreate lvdisplay lvremove /lib/liblvm.so),
- qw(mkreiserfs resize_reiserfs mkfs.xfs),
- );
-}
-
-################################################################################
-package pkgs_interactive;
-use run_program;
-use common;
-use pkgs;
-
-sub install_steps::do_pkgs {
- my ($o) = @_;
- bless { o => $o }, 'pkgs_interactive';
-}
-
-sub install {
- my ($do, @l) = @_;
- $do->{o}->pkg_install(@l);
-}
-
-sub is_installed {
- my ($do, @l) = @_;
- foreach (@l) {
- my $p = pkgs::packageByName($do->{o}->{packages}, $_);
- $p && $p->flag_selected or return;
- }
- 1;
-}
-
-sub remove {
- my ($do, @l) = @_;
-
- @l = grep {
- my $p = pkgs::packageByName($do->{o}->{packages}, $_);
- pkgs::unselectPackage($do->{o}->{packages}, $p) if $p;
- $p;
- } @l;
- run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', @l);
-}
-
-sub remove_nodeps {
- my ($do, @l) = @_;
-
- @l = grep {
- my $p = pkgs::packageByName($do->{o}->{packages}, $_);
- if ($p) {
- $p->set_flag_requested(0);
- $p->set_flag_required(0);
- }
- $p;
- } @l;
- run_program::rooted($do->{o}->{prefix}, 'rpm', '-e', '--nodeps', @l);
-}
-################################################################################
-
-package install_any;
-
-1;
diff --git a/perl-install/install_gtk.pm b/perl-install/install_gtk.pm
deleted file mode 100644
index a30298158..000000000
--- a/perl-install/install_gtk.pm
+++ /dev/null
@@ -1,440 +0,0 @@
-package install_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use my_gtk qw(:helpers :wrappers);
-use common;
-use lang;
-use devices;
-
-#-#####################################################################################
-#-INTERN CONSTANT
-#-#####################################################################################
-my @themes_vga16 = qw(blue blackwhite savane);
-my @themes_desktop = qw(mdk-Desktop marble3d);
-my @themes_firewall = qw(mdk-Firewall);
-my @themes = qw(mdk marble3d);
-
-my (@background1, @background2);
-
-
-#------------------------------------------------------------------------------
-sub load_rc {
- my ($name) = @_;
-
- if (my ($f) = grep { -r $_ } map { "$_/$name.rc" } ("share", $ENV{SHARE_PATH}, dirname(__FILE__))) {
- Gtk::Rc->parse($f);
- foreach (cat_($f)) {
- if (/style\s+"background"/ .. /^\s*$/) {
- @background1 = map { $_ * 256 * 257 } split ',', $1 if /NORMAL.*\{(.*)\}/;
- @background2 = map { $_ * 256 * 257 } split ',', $1 if /PRELIGHT.*\{(.*)\}/;
- }
- }
- }
-}
-
-sub default_theme {
- my ($o) = @_;
- @themes = @themes_desktop if $o->{meta_class} eq 'desktop';
- @themes = @themes_firewall if $o->{meta_class} eq 'firewall';
- @themes = @themes_vga16 if $o->{simple_themes} || $o->{vga16};
- install_theme($o, $o->{theme} || $themes[0]);
-}
-
-#------------------------------------------------------------------------------
-sub install_theme {
- my ($o, $theme) = @_;
-
- $o->{theme} = $theme || $o->{theme};
-
- load_rc($_) foreach "themes-$o->{theme}", "install", "themes";
-
- if (my ($font, $font2) = lang::get_x_fontset($o->{lang}, $::rootwidth < 800 ? 10 : 12)) {
- $font2 ||= $font;
- Gtk::Rc->parse_string(qq(
-style "default-font"
-{
- fontset = "$font,*"
-}
-style "small-font"
-{
- fontset = "$font2,*"
-}
-widget "*" style "default-font"
-widget "*Steps*" style "small-font"
-
-));
- }
-
- gtkset_background(@background1) unless $::live; #- || testing;
-
- create_logo_window($o);
- create_help_window($o);
-}
-
-#------------------------------------------------------------------------------
-sub create_big_help {
- my ($o) = @_;
- my $w = my_gtk->new('', grab => 1, force_position => [ $::stepswidth, $::logoheight ]);
- $w->{rwindow}->set_usize($::logowidth, $::rootheight - $::logoheight);
- gtkadd($w->{window},
- gtkpack_(new Gtk::VBox(0,0),
- 1, createScrolledWindow(gtktext_insert(new Gtk::Text, $o->{current_help})),
- 0, gtksignal_connect(my $ok = new Gtk::Button(_("Ok")), "clicked" => sub { Gtk->main_quit }),
- ));
- $ok->grab_focus;
- $w->main;
- gtkset_mousecursor_normal();
-}
-
-#------------------------------------------------------------------------------
-sub create_help_window {
- my ($o) = @_;
-
- my $w;
- if ($w = $o->{help_window}) {
- $_->destroy foreach $w->{window}->children;
- } else {
- $w = bless {}, 'my_gtk';
- $w->{rwindow} = $w->{window} = new Gtk::Window;
- $w->{rwindow}->set_uposition($::rootwidth - $::helpwidth, $::rootheight - $::helpheight);
- $w->{rwindow}->set_usize($::helpwidth, $::helpheight);
- $w->{rwindow}->set_title('skip');
- $w->sync;
- }
- my $pixmap = gtkpng("$ENV{SHARE_PATH}/help.png");
- gtkadd($w->{window},
- gtkpack_(new Gtk::HBox(0,-2),
- 0, gtkadd(gtksignal_connect(new Gtk::Button, clicked => sub { create_big_help($o) }), $pixmap),
- 1, createScrolledWindow($o->{help_window_text} = new Gtk::Text),
- ));
- $o->set_help($o->{step}) if $o->{step};
- $w->show;
- $o->{help_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub create_steps_window {
- my ($o) = @_;
-
- my $PIX_H = my $PIX_W = 21;
-
- $o->{steps_window}->destroy if $o->{steps_window};
-
- my $w = bless {}, 'my_gtk';
- $w->{rwindow} = $w->{window} = new Gtk::Window;
- $w->{rwindow}->set_uposition(0, 0);
- $w->{rwindow}->set_usize($::stepswidth, $::stepsheight);
- $w->{rwindow}->set_name('Steps');
- $w->{rwindow}->set_events('button_press_mask');
- $w->{rwindow}->set_title('skip');
- #$w->show;
-
- gtkadd($w->{window},
- gtkpack_(new Gtk::VBox(0,0),
- (map {; 1, $_ } map {
- my $step_name = $_;
- my $step = $o->{steps}{$_};
- my $darea = new Gtk::DrawingArea;
- my $in_button;
- my $draw_pix = sub {
- my ($map, $mask) = gtkcreate_xpm($_[0]);
- $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
- $map, 0, 0,
- ($darea->allocation->[2]-$PIX_W)/2 + 3,
- ($darea->allocation->[3]-$PIX_H)/2,
- $PIX_W , $PIX_H );
- };
-
- my $f = sub {
- my ($type) = @_;
- my $color = $step->{done} ? 'green' : $step->{entered} ? 'orange' : 'red';
- "$ENV{SHARE_PATH}/step-$color$type.xpm";
- };
- $darea->set_usize($PIX_W+3,$PIX_H);
- $darea->set_events(['exposure_mask', 'enter_notify_mask', 'leave_notify_mask', 'button_press_mask', 'button_release_mask' ]);
- $darea->signal_connect(expose_event => sub { $draw_pix->($f->('')) });
- if ($step->{reachable}) {
- $darea->signal_connect(enter_notify_event => sub { $in_button=1; $draw_pix->($f->('-on')); });
- $darea->signal_connect(leave_notify_event => sub { undef $in_button; $draw_pix->($f->('')); });
- $darea->signal_connect(button_press_event => sub { $draw_pix->($f->('-click')); });
- $darea->signal_connect(button_release_event => sub { $in_button && die "setstep $step_name\n" });
- }
- gtkpack_(new Gtk::HBox(0,5), 0, $darea, 0, new Gtk::Label(translate($step->{text})));
- } grep {
- !eval $o->{steps}{$_}{hidden};
- } @{$o->{orderedSteps}}),
- 0, gtkpack(new Gtk::HBox(0,0), map {
- my $t = $_;
- my $w = new Gtk::Button('');
- $w->set_name($t);
- $w->set_usize(0, 7);
- gtksignal_connect($w, clicked => sub {
- $::setstep or return; #- just as setstep s
- install_theme($o, $t); die "theme_changed\n"
- });
- } @themes)));
- $w->show;
- $o->{steps_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub create_logo_window {
- my ($o) = @_;
-
- gtkdestroy($o->{logo_window});
- my $w = bless {}, 'my_gtk';
- $w->{rwindow} = $w->{window} = new Gtk::Window;
- $w->{rwindow}->set_uposition($::stepswidth, 0);
- $w->{rwindow}->set_usize($::logowidth, $::logoheight);
- $w->{rwindow}->set_name("logo");
- $w->{rwindow}->set_title('skip');
- $w->show;
- my $file = $o->{meta_class} eq 'desktop' ? "logo-mandrake-Desktop.png" : "logo-mandrake.png";
- $o->{meta_class} eq 'firewall' and $file = "logo-mandrake-Firewall.png";
- -r $file or $file = "$ENV{SHARE_PATH}/$file";
- -r $file and gtkadd($w->{window}, gtkpng($file));
- $o->{logo_window} = $w;
-}
-
-#------------------------------------------------------------------------------
-sub init_sizes() {
- ($::rootheight, $::rootwidth) = my_gtk::gtkroot()->get_size;
- $::live and $::rootheight -= 80;
- #- ($::rootheight, $::rootwidth) = (min(768, $::rootheight), min(1024, $::rootwidth));
- ($::stepswidth, $::stepsheight) = (145, $::rootheight);
- ($::logowidth, $::logoheight) = ($::rootwidth - $::stepswidth, 40);
- ($::helpwidth, $::helpheight) = ($::rootwidth - $::stepswidth, 104);
- ($::windowwidth, $::windowheight) = ($::rootwidth - $::stepswidth, $::rootheight - $::helpheight - $::logoheight);
-}
-
-#------------------------------------------------------------------------------
-sub createXconf {
- my ($file, $mouse_type, $mouse_dev, $wacom_dev) = @_;
-
- devices::make("/dev/kbd") if arch() =~ /^sparc/; #- used by Xsun style server.
- symlinkf(devices::make($mouse_dev), "/dev/mouse");
-
- #- needed for imlib to start on 8-bit depth visual.
- symlink("/tmp/stage2/etc/imrc", "/etc/imrc");
- symlink("/tmp/stage2/etc/im_palette.pal", "etc/im_palette.pal");
-
-if (arch() =~ /^ia64/) {
- require Xconfigurator;
- my ($card) = Xconfigurator::cardConfigurationAuto();
- Xconfigurator::updateCardAccordingName($card, $card->{type}) if $card && $card->{type};
- local *F;
- open F, ">$file" or die "can't create X configuration file $file";
- print F <<END;
-
-Section "Files"
- FontPath "/usr/X11R6/lib/X11/fonts:unscaled"
-EndSection
-
-Section "InputDevice"
- Identifier "Keyboard1"
- Driver "Keyboard"
- Option "AutoRepeat" "250 30"
- Option "XkbDisable"
-
- Option "XkbRules" "xfree86"
- Option "XkbModel" "pc105"
- Option "XkbLayout" ""
-EndSection
-
-Section "InputDevice"
- Identifier "Mouse1"
- Driver "mouse"
- Option "Protocol" "$mouse_type"
- Option "Device" "/dev/mouse"
-EndSection
-
-Section "Monitor"
- Identifier "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
- VendorName "Unknown"
- ModelName "Unknown"
- HorizSync 31.5-35.5
- VertRefresh 50-70
-EndSection
-
-Section "Device"
- Identifier "Generic VGA"
- Driver "vga"
-EndSection
-
-Section "Device"
- Identifier "device1"
- VendorName "Unknown"
- BoardName "Unknown"
- Driver "$card->{driver}"
-EndSection
-
-Section "Screen"
- Identifier "screen1"
- Device "device1"
- Monitor "Generic|High Frequency SVGA, 1024x768 at 70 Hz"
- DefaultColorDepth 16
- Subsection "Display"
- Depth 16
- Modes "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
-EndSection
-
-Section "ServerLayout"
- Identifier "layout1"
- Screen "screen1"
- InputDevice "Mouse1" "CorePointer"
- InputDevice "Keyboard1" "CoreKeyboard"
-EndSection
-
-END
-
-
-}
-else
- {
-
-
- my $wacom;
- if ($wacom_dev) {
- $wacom_dev = devices::make($wacom_dev);
- $wacom = <<END;
-Section "Module"
- Load "xf86Wacom.so"
-EndSection
-
-Section "XInput"
- SubSection "WacomStylus"
- Port "$wacom_dev"
- AlwaysCore
- EndSubSection
- SubSection "WacomCursor"
- Port "$wacom_dev"
- AlwaysCore
- EndSubSection
- SubSection "WacomEraser"
- Port "$wacom_dev"
- AlwaysCore
- EndSubSection
-EndSection
-END
- }
-
- local *F;
- open F, ">$file" or die "can't create X configuration file $file";
- print F <<END;
-Section "Files"
- FontPath "/usr/X11R6/lib/X11/fonts:unscaled"
-EndSection
-
-Section "Keyboard"
- Protocol "Standard"
- AutoRepeat 0 0
-
- LeftAlt Meta
- RightAlt Meta
- ScrollLock Compose
- RightCtl Control
-END
-
- if (arch() =~ /^sparc/) {
- print F <<END;
- XkbRules "sun"
- XkbModel "sun"
- XkbLayout "us"
- XkbCompat "compat/complete"
- XkbTypes "types/complete"
- XkbKeycodes "sun(type5)"
- XkbGeometry "sun(type5)"
- XkbSymbols "sun/us(sun5)"
-END
- } else {
- print F " XkbDisable\n";
- }
-
- print F <<END;
-EndSection
-
-Section "Pointer"
- Protocol "$mouse_type"
- Device "/dev/mouse"
- ZAxisMapping 4 5
-EndSection
-
-$wacom
-
-Section "Monitor"
- Identifier "My Monitor"
- VendorName "Unknown"
- ModelName "Unknown"
- HorizSync 31.5-35.5
- VertRefresh 50-70
- Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
- Modeline "640x480" 28.3 640 664 760 800 480 491 493 525
- ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
-EndSection
-
-
-Section "Device"
- Identifier "Generic VGA"
- VendorName "Unknown"
- BoardName "Unknown"
- Chipset "generic"
-EndSection
-
-Section "Device"
- Identifier "svga"
- VendorName "Unknown"
- BoardName "Unknown"
-EndSection
-
-Section "Screen"
- Driver "vga16"
- Device "Generic VGA"
- Monitor "My Monitor"
- Subsection "Display"
- Modes "640x480"
- ViewPort 0 0
- EndSubsection
-EndSection
-
-Section "Screen"
- Driver "fbdev"
- Device "Generic VGA"
- Monitor "My Monitor"
- Subsection "Display"
- Depth 16
- Modes "default"
- ViewPort 0 0
- EndSubsection
-EndSection
-
-Section "Screen"
- Driver "svga"
- Device "svga"
- Monitor "My Monitor"
- Subsection "Display"
- Depth 16
- Modes "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
-EndSection
-
-Section "Screen"
- Driver "accel"
- Device "svga"
- Monitor "My Monitor"
- Subsection "Display"
- Depth 16
- Modes "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
-EndSection
-END
-}
-}
-#- ModeLine "640x480" 28 640 672 768 800 480 490 492 525
-
-1;
diff --git a/perl-install/install_interactive.pm b/perl-install/install_interactive.pm
deleted file mode 100644
index b9ee10de7..000000000
--- a/perl-install/install_interactive.pm
+++ /dev/null
@@ -1,272 +0,0 @@
-package install_interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-use vars;
-
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use detect_devices;
-use install_steps;
-use devices;
-use fsedit;
-use log;
-use fs;
-
-
-sub tellAboutProprietaryModules {
- my ($o) = @_;
- my @l = grep {$_} map { $_->{driver} =~ /^Bad:(.*)/ && $1 } detect_devices::probeall();
- $o->ask_warn('',
-_("Some hardware on your computer needs ``proprietary'' drivers to work.
-You can find some information about them at: %s", join(", ", @l))) if @l;
-}
-
-#- unit of $mb is mega bytes, min and max are in sectors, this
-#- function is used to convert back to sectors count the size of
-#- a partition ($mb) given from the interface (on Resize or Create).
-#- modified to take into account a true bounding with min and max.
-sub from_Mb {
- my ($mb, $min, $max) = @_;
- $mb <= $min >> 11 and return $min;
- $mb >= $max >> 11 and return $max;
- $mb * 2048;
-}
-
-sub partition_with_diskdrake {
- my ($o, $all_hds, $nowizard) = @_;
- my $ok;
-
- $o->set_help('partition_with_diskdrake');
- do {
- $ok = 1;
- require diskdrake::interactive;
- {
- local $::expert = $::expert;
- diskdrake::interactive::main($o, $all_hds, $nowizard);
- }
- if (delete $o->{wizard}) {
- partitionWizard($o, 'nodiskdrake') or redo;
- return 1;
- }
- my @fstab = fsedit::get_all_fstab($all_hds);
-
- unless (fsedit::get_root_(\@fstab)) {
- $ok = 0;
- $o->ask_okcancel('', _("You must have a root partition.
-For this, create a partition (or click on an existing one).
-Then choose action ``Mount point'' and set it to `/'"), 1) or return;
- }
- if (!grep { isSwap($_) } @fstab) {
- $o->ask_warn('', _("You must have a swap partition")), $ok=0 if !$::expert;
- $ok &&= $::expert || $o->ask_okcancel('', _("You don't have a swap partition.\n\nContinue anyway?"));
- }
- if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $all_hds)) {
- $o->ask_warn('', _("You must have a FAT partition mounted in /boot/efi"));
- $ok = '';
- }
- } until $ok;
- 1;
-}
-
-sub partitionWizardSolutions {
- my ($o, $all_hds, $fstab, $readonly) = @_;
- my $hds = $all_hds->{hds};
- my @wizlog;
- my (@solutions, %solutions);
-
- my $min_linux = 400 << 11;
- my $max_linux = 3000 << 11;
- my $min_swap = 50 << 11;
- my $max_swap = 300 << 11;
- my $min_freewin = 100 << 11;
-
- # each solution is a [ score, text, function ], where the function retunrs true if succeeded
-
- my @good_hds = grep { $_->can_raw_add } @$hds;
- if (fsedit::free_space(@good_hds) > $min_linux and !$readonly) {
- $solutions{free_space} = [ 20, _("Use free space"), sub { fsedit::auto_allocate($all_hds); 1 } ]
- } else {
- push @wizlog, _("Not enough free space to allocate new partitions") . ": " .
- (@good_hds ?
- fsedit::free_space(@good_hds) . " < $min_linux" :
- "no harddrive on which partitions can be added") if !$readonly;
- }
-
- if (my @truefs = grep { isTrueFS($_) } @$fstab) {
- #- value twice the ext2 partitions
- $solutions{existing_part} = [ 6 + @truefs + @$fstab, _("Use existing partitions"), sub { $o->ask_mntpoint_s($fstab) } ]
- } else {
- push @wizlog, _("There is no existing partition to use");
- }
-
- my @fats = grep { isFat($_) } @$fstab;
- fs::df($_) foreach @fats;
- if (my @ok_forloopback = sort { $b->{free} <=> $a->{free} } grep { $_->{free} > $min_linux + $min_swap + $min_freewin } @fats) {
- $solutions{loopback} =
- [ -10 - @fats, _("Use the Windows partition for loopback"),
- sub {
- my ($s_root, $s_swap);
- my $part = $o->ask_from_listf('', _("Which partition do you want to use for Linux4Win?"), \&partition_table::description, \@ok_forloopback) or return;
- $max_swap = $min_swap + 1 if $part->{free} - $max_swap < $min_linux;
- $o->ask_from('', _("Choose the sizes"), [
- { label => _("Root partition size in MB: "), val => \$s_root, min => $min_linux >> 11, max => min($part->{free} - $max_swap, $max_linux) >> 11, type => 'range' },
- { label => _("Swap partition size in MB: "), val => \$s_swap, min => $min_swap >> 11, max => $max_swap >> 11, type => 'range' },
- ]) or return;
- push @{$part->{loopback}},
- { type =>0x483, loopback_file => '/lnx4win/linuxsys.img', mntpoint => '/', size => $s_root << 11, loopback_device => $part, notFormatted => 1 },
- { type => 0x82, loopback_file => '/lnx4win/swapfile', mntpoint => 'swap', size => $s_swap << 11, loopback_device => $part, notFormatted => 1 };
- fsedit::recompute_loopbacks($all_hds);
- 1;
- } ];
- $solutions{resize_fat} =
- [ 6 - @fats, _("Use the free space on the Windows partition"),
- sub {
- $o->set_help('resizeFATChoose');
- my $part = $o->ask_from_listf('', _("Which partition do you want to resize?"), \&partition_table::description, \@ok_forloopback) or return;
- $o->set_help('resizeFATWait');
- my $w = $o->wait_message(_("Resizing"), _("Resizing Windows partition"));
- require resize_fat::main;
- my $resize_fat = eval { resize_fat::main->new($part->{device}, devices::make($part->{device})) };
- $@ and die _("The FAT resizer is unable to handle your partition,
-the following error occured: %s", $@);
- my $min_win = $resize_fat->min_size;
- $part->{size} > $min_linux + $min_swap + $min_freewin + $min_win or die _("Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrake Linux installation.");
- $o->ask_okcancel('', _("WARNING!
-
-DrakX will now resize your Windows partition. Be careful:
-this operation is dangerous. If you have not already done
-so, you should first exit the installation, run scandisk
-under Windows (and optionally run defrag), then restart the
-installation. You should also backup your data.
-When sure, press Ok.")) or return;
-
- my $mb_size = $part->{size} >> 11;
- $o->ask_from('', _("Which size do you want to keep for Windows on"), [
- { label => _("partition %s", partition_table::description($part)), val => \$mb_size, min => $min_win >> 11, max => ($part->{size} - $min_linux - $min_swap) >> 11, type => 'range' },
- ]) or return;
-
- my $size = from_Mb($mb_size, $min_win, $part->{size});
-
- local *log::l = sub { $w->set(join(' ', @_)) };
- eval { $resize_fat->resize($size) };
- $@ and die _("FAT resizing failed: %s", $@);
-
- $part->{size} = $size;
- $part->{isFormatted} = 1;
-
- my ($hd) = fsedit::part2hd($part, $all_hds);
- $hd->{isDirty} = $hd->{needKernelReread} = 1;
- $hd->adjustEnd($part);
- partition_table::adjust_local_extended($hd, $part);
- partition_table::adjust_main_extended($hd);
-
- fsedit::auto_allocate($all_hds);
- 1;
- } ] if !$readonly;
- } else {
- push @wizlog, _("There is no FAT partition to resize or to use as loopback (or not enough space left)") .
- @fats ? "\nFAT partitions:" . join('', map { "\n $_->{device} $_->{free} (" . ($min_linux + $min_swap + $min_freewin) . ")" } @fats) : '';
- }
-
- if (@$fstab && !$readonly) {
- $solutions{wipe_drive} =
- [ 10, fsedit::is_one_big_fat($hds) ? _("Remove Windows(TM)") : _("Erase entire disk"),
- sub {
- $o->set_help('takeOverHdChoose');
- my $hd = $o->ask_from_listf('', _("You have more than one hard drive, which one do you install linux on?"),
- \&partition_table::description, $hds) or return;
- $o->set_help('takeOverHdConfirm');
- $o->ask_okcancel('', _("ALL existing partitions and their data will be lost on drive %s", partition_table::description($hd))) or return;
- partition_table_raw::zero_MBR($hd);
- fsedit::auto_allocate($all_hds);
- 1;
- } ];
- }
-
- if (!$readonly) {
- $solutions{diskdrake} = [ 0, _("Custom disk partitioning"), sub { partition_with_diskdrake($o, $all_hds, 'nowizard') } ];
- }
-
- $solutions{fdisk} =
- [ -10, _("Use fdisk"), sub {
- $o->enter_console;
- foreach (@$hds) {
- print "\n" x 10, _("You can now partition %s.
-When you are done, don't forget to save using `w'", partition_table::description($_));
- print "\n\n";
- my $pid = 0;
- if (arch() =~ /ppc/) {
- $pid = fork or exec "pdisk", devices::make($_->{device});
- } else {
- $pid = fork or exec "fdisk", devices::make($_->{device});
- }
- waitpid($pid, 0);
- }
- $o->leave_console;
- 0;
- } ] if $o->{partitioning}{fdisk};
-
- log::l("partitioning wizard log:\n", (map { ">>wizlog>>$_\n" } @wizlog));
- %solutions;
-}
-
-sub partitionWizard {
- my ($o, $nodiskdrake) = @_;
-
- $o->set_help('doPartitionDisks');
-
- my %solutions = partitionWizardSolutions($o, $o->{all_hds}, $o->{fstab}, $o->{partitioning}{readonly});
- if ($o->{lnx4win}) {
- if ($solutions{loopback}) {
- %solutions = (loopback => $solutions{loopback});
- } else {
- $o->ask_warn('', _("You don't have enough free space on your Windows partition")) if grep { isFat($_) } @{$o->{fstab}}
- }
- }
-
- delete $solutions{diskdrake} if $nodiskdrake;
-
- my @solutions = sort { $b->[0] <=> $a->[0] } values %solutions;
-
- my $level = $::expert ? -9999 : 0;
- my @sol = grep { $_->[0] >= $level } @solutions;
-
- log::l( "solutions found: " . join('', map {$_->[1]} @sol) .
- " (all solutions found: " . join('', map {$_->[1]} @solutions) . ")");
-
- @solutions = @sol if @sol > 1;
- log::l("solutions: ", int @solutions);
- @solutions or $o->ask_warn('', _("I can't find any room for installing")), die 'already displayed';
-
- my $ok; while (!$ok) {
- log::l('HERE: ', join(',', map { $_->[1] } @solutions));
- if (my $sol = $o->ask_from_listf('', _("The DrakX Partitioning wizard found the following solutions:"), sub { $_[0][1] }, \@solutions)) {
- log::l("partitionWizard calling solution $sol->[1]");
- eval { $ok = $sol->[2]->() };
- die if $@ =~ /setstep/;
- $ok &&= !$@;
- $@ and $o->ask_warn('', _("Partitioning failed: %s", $@));
- } else {
- $nodiskdrake ? return : die "setstep setupSCSI\n";
- }
- }
- 1;
-}
-
-sub upNetwork {
- my ($o, $pppAvoided) = @_;
- my $w = $o->wait_message('', _("Bringing up the network"));
- install_steps::upNetwork($o, $pppAvoided);
-}
-sub downNetwork {
- my ($o, $pppOnly) = @_;
- my $w = $o->wait_message('', _("Bringing down the network"));
- install_steps::downNetwork($o, $pppOnly);
-}
-
-
-
-1;
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
deleted file mode 100644
index cca7d9552..000000000
--- a/perl-install/install_steps.pm
+++ /dev/null
@@ -1,1067 +0,0 @@
-package install_steps; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@filesToSaveForUpgrade @filesNewerToUseAfterUpgrade @ISA);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_any qw(:all);
-use partition_table qw(:types);
-use detect_devices;
-use modules;
-use run_program;
-use lang;
-use keyboard;
-use fsedit;
-use loopback;
-use pkgs;
-use any;
-use log;
-use fs;
-
-@filesToSaveForUpgrade = qw(
-/etc/ld.so.conf /etc/fstab /etc/hosts /etc/conf.modules /etc/modules.conf
-);
-
-@filesNewerToUseAfterUpgrade = qw(
-/etc/profile
-);
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-sub new($$) {
- my ($type, $o) = @_;
-
- bless $o, ref $type || $type;
- return $o;
-}
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub enteringStep {
- my ($o, $step) = @_;
- log::l("starting step `$step'");
-}
-sub leavingStep {
- my ($o, $step) = @_;
- log::l("step `$step' finished");
-
- if (-d "$o->{prefix}/root/drakx") {
- eval { cp_af("/tmp/ddebug.log", "$o->{prefix}/root/drakx") };
- output(install_any::auto_inst_file(), install_any::g_auto_install(1));
- }
-
- for (my $s = $o->{steps}{first}; $s; $s = $o->{steps}{$s}{next}) {
- #- the reachability property must be recomputed each time to take
- #- into account failed step.
- next if $o->{steps}{$s}{done} && !$o->{steps}{$s}{redoable};
-
- my $reachable = 1;
- if (my $needs = $o->{steps}{$s}{needs}) {
- my @l = ref $needs ? @$needs : $needs;
- $reachable = min(map { $o->{steps}{$_}{done} || 0 } @l);
- }
- $o->{steps}{$s}{reachable} = 1 if $reachable;
- }
- $o->{steps}{$step}{reachable} = $o->{steps}{$step}{redoable};
-
- while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) {
- eval { &$f() };
- $o->ask_warn(_("Error"), [
-_("An error occurred, but I don't know how to handle it nicely.
-Continue at your own risk."), $@ ]) if $@;
- }
-}
-
-sub errorInStep($$) { print "error :(\n"; c::_exit(1) }
-sub kill_action {}
-sub set_help { 1 }
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
- my ($o) = @_;
- lang::set($o->{lang}, !$o->isa('interactive_gtk'));
- $o->{langs} ||= { $o->{lang} => 1 };
-
- log::l("selectLanguage: pack_langs ", lang::pack_langs($o->{langs}));
-
- if ($o->{keyboard_unsafe} || !$o->{keyboard}) {
- $o->{keyboard_unsafe} = 1;
- $o->{keyboard} = keyboard::lang2keyboard($o->{lang});
- keyboard::setup($o->{keyboard}) if !$::live;
- }
-
- addToBeDone {
- lang::write_langs($o->{prefix}, $o->{langs});
- } 'formatPartitions' unless $::g_auto_install;
- addToBeDone {
- lang::write($o->{prefix}, $o->{lang});
- } 'installPackages' unless $::g_auto_install;
-}
-#------------------------------------------------------------------------------
-sub selectKeyboard {
- my ($o) = @_;
- keyboard::setup($o->{keyboard});
-
- addToBeDone {
- keyboard::write($o->{prefix}, $o->{keyboard}, lang::lang2charset($o->{lang}));
- } 'installPackages' unless $::g_auto_install;
-}
-#------------------------------------------------------------------------------
-sub acceptLicence {}
-sub selectPath {}
-#------------------------------------------------------------------------------
-sub selectInstallClass {}
-#------------------------------------------------------------------------------
-sub setupSCSI {
- my ($o) = @_;
- modules::configure_pcmcia($o->{pcmcia}) if $o->{pcmcia};
- modules::load_ide();
- modules::load_category('disk/scsi|hardware_raid');
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksBefore {
- my ($o) = @_;
- eval {
- close *pkgs::LOG;
- eval { fs::umount("$o->{prefix}/proc") };
- eval { fs::umount_all($o->{fstab}, $o->{prefix}) };
- eval { sleep 1; fs::umount_all($o->{fstab}, $o->{prefix}) } if $@; #- HACK
- } if $o->{fstab} && !$::testing && !$::live;
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksAfter {
- my ($o) = @_;
-
- if (!$::testing) {
- my $hds = $o->{all_hds}{hds};
- partition_table::write($_) foreach @$hds;
- $_->{rebootNeeded} and $o->rebootNeeded foreach @$hds;
- }
-
- fs::set_removable_mntpoints($o->{all_hds});
- fs::set_all_default_options($o->{all_hds}, $o->{useSupermount}, $o->{security}, lang::fs_options($o->{lang}))
- if !$o->{isUpgrade};
-
- $o->{fstab} = [ fsedit::get_all_fstab($o->{all_hds}) ];
- fsedit::get_root_($o->{fstab}) or die "Oops, no root partition";
-
- if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) {
- die "Need bootstrap partition to boot system!" if !(defined $partition_table_mac::bootstrap_part);
- }
-
- if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $o->{all_hds})) {
- die _("You must have a FAT partition mounted in /boot/efi");
- }
-
- if ($o->{partitioning}{use_existing_root}) {
- #- ensure those partitions are mounted so that they are not proposed in choosePartitionsToFormat
- fs::mount_part($_, $o->{prefix}) foreach (sort { $a->{mntpoint} cmp $b->{mntpoint} }
- grep { $_->{mntpoint} && maybeFormatted($_) } @{$o->{fstab}});
- }
-
- cat_("/proc/mounts") =~ m|(\S+)\s+/tmp/image nfs| &&
- !grep { $_->{mntpoint} eq "/mnt/nfs" } @{$o->{all_hds}{nfss}} and
- push @{$o->{all_hds}{nfss}}, { type => 'nfs', mntpoint => "/mnt/nfs", device => $1, options => "noauto,ro,nosuid,soft,rsize=8192,wsize=8192" };
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
- my ($o) = @_;
-
- install_any::getHds($o);
-
- if ($o->{partitioning}{use_existing_root} || $o->{isUpgrade}) {
- # either one root is defined (and all is ok), or we take the first one we find
- my $p = fsedit::get_root_($o->{fstab}) || first(install_any::find_root_parts($o->{fstab}, $o->{prefix})) or die;
- install_any::use_root_part($o->{all_hds}, $p, $o->{prefix});
- }
- if ($o->{partitioning}{auto_allocate}) {
- fsedit::auto_allocate($o->{all_hds}, $o->{partitions});
- }
-}
-
-#------------------------------------------------------------------------------
-
-sub ask_mntpoint_s {
- my ($o, $fstab) = @_;
-
- #- TODO: set the mntpoints
-
- my %m; foreach (@$fstab) {
- my $m = $_->{mntpoint};
-
- next unless $m && $m ne 'swap'; #- there may be a lot of swap.
-
- $m{$m} and die _("Duplicate mount point %s", $m);
- $m{$m} = 1;
-
- #- in case the type does not correspond, force it to ext2
- $_->{type} = 0x83 if $m =~ m|^/| && !isFat($_) && !isTrueFS($_);
- }
- 1;
-}
-
-
-sub rebootNeeded($) {
- my ($o) = @_;
- log::l("Rebooting...");
- c::_exit(0);
-}
-
-sub choosePartitionsToFormat($$) {
- my ($o, $fstab) = @_;
-
- foreach (@$fstab) {
- $_->{mntpoint} = "swap" if isSwap($_);
- $_->{mntpoint} or next;
-
- add2hash_($_, { toFormat => $_->{notFormatted} });
- $_->{toFormatUnsure} = member($_->{mntpoint}, '/', '/usr');
-
- if (!$_->{toFormat}) {
- my $t = fsedit::typeOfPart($_->{device});
- $_->{toFormatUnsure} ||=
- #- if detected dos/win, it's not precise enough to just compare the types (too many of them)
- (!$t || isOtherAvailableFS({ type => $t }) ? !isOtherAvailableFS($_) : $t != $_->{type});
- }
- }
-}
-
-sub formatMountPartitions {
- my ($o) = @_;
- fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix});
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
- my ($o) = @_;
- install_any::setPackages($o);
- pkgs::selectPackagesAlreadyInstalled($o->{packages}, $o->{prefix})
- if !$o->{isUpgrade} && (-r "$o->{prefix}/var/lib/rpm/packages.rpm" || -r "$o->{prefix}/var/lib/rpm/Packages");
-}
-sub selectPackagesToUpgrade {
- my ($o) = @_;
- pkgs::selectPackagesToUpgrade($o->{packages}, $o->{prefix}, $o->{base}, $o->{toRemove}, $o->{toSave});
-}
-
-sub choosePackages {
- my ($o, $packages, $compssUsers, $first_time) = @_;
-
- #- now for upgrade, package that must be upgraded are
- #- selected first, after is used the same scheme as install.
-
- #- make sure we kept some space left for available else the system may
- #- not be able to start (xfs at least).
- my $available = install_any::getAvailableSpace($o);
- my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
- log::l(sprintf "available size %s (corrected %s)", formatXiB($available), formatXiB($availableCorrected));
-
- add2hash_($o, { compssListLevel => 5 }) if !$::auto_install;
-
- #- avoid destroying user selection of packages but only
- #- for expert, as they may have done individual selection before.
- if ($first_time || !$::expert) {
- install_any::unselectMostPackages($o);
-
- exists $o->{compssListLevel}
- and pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $o->{compssListLevel}, $availableCorrected);
- }
- $availableCorrected;
-}
-
-sub beforeInstallPackages {
- my ($o) = @_;
-
- #- save these files in case of upgrade failure.
- if ($o->{isUpgrade}) {
- foreach (@filesToSaveForUpgrade) {
- unlink "$o->{prefix}/$_.mdkgisave";
- if (-e "$o->{prefix}/$_") {
- eval { cp_af("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
- }
- }
- foreach (@filesNewerToUseAfterUpgrade) {
- unlink "$o->{prefix}/$_.rpmnew";
- }
- }
-
- #- some packages need such files for proper installation.
- install_any::write_fstab($o);
-
- require network;
- network::add2hosts("$o->{prefix}/etc/hosts", "localhost.localdomain", "127.0.0.1");
-
- log::l("setting excludedocs to $o->{excludedocs}");
- substInFile { s/%_excludedocs.*//; $_ .= "%_excludedocs yes\n" if eof && $o->{excludedocs} } "$o->{prefix}/etc/rpm/macros";
-}
-
-sub pkg_install {
- my ($o, @l) = @_;
- log::l("selecting packages");
- require pkgs;
- if ($::testing) {
- log::l("selecting package \"$_\"") foreach @l;
- } else {
- pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found") foreach @l;
- }
- my @toInstall = pkgs::packagesToInstall($o->{packages});
- if (@toInstall) {
- log::l("installing packages");
- $o->installPackages;
- } else {
- log::l("all packages selected are already installed, nothing to do")
- }
-}
-
-sub pkg_install_if_requires_satisfied {
- my ($o, @l) = @_;
- require pkgs;
- foreach (@l) {
- my %newSelection;
- my $pkg = pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found";
- pkgs::selectPackage($o->{packages}, $pkg, 0, \%newSelection);
- if (scalar(keys %newSelection) == 1) {
- pkgs::selectPackage($o->{packages}, $pkg);
- } else {
- log::l("pkg_install_if_requires_satisfied: not selecting $_ because of ", join(", ", keys %newSelection));
- }
- }
- $o->installPackages;
-}
-
-sub installPackages($$) { #- complete REWORK, TODO and TOCHECK!
- my ($o) = @_;
- my $packages = $o->{packages};
-
- if (@{$o->{toRemove} || []}) {
- #- hack to ensure proper upgrade of packages from other distribution,
- #- as release number are not mandrake based. this causes save of
- #- important files and restore them after.
- foreach (@{$o->{toSave} || []}) {
- if (-e "$o->{prefix}/$_") {
- eval { cp_af("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
- }
- }
- pkgs::remove($o->{prefix}, $o->{toRemove});
- foreach (@{$o->{toSave} || []}) {
- if (-e "$o->{prefix}/$_.mdkgisave") {
- renamef("$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_");
- }
- }
- $o->{toSave} = [];
-
- #- hack for compat-glibc to upgrade properly :-(
- if (pkgs::packageByName($packages, 'compat-glibc')->flag_selected &&
- !pkgs::packageByName($packages, 'compat-glibc')->flag_installed) {
- rename "$o->{prefix}/usr/i386-glibc20-linux", "$o->{prefix}/usr/i386-glibc20-linux.mdkgisave";
- }
- }
-
- #- small transaction will be built based on this selection and depslist.
- my @toInstall = pkgs::packagesToInstall($packages);
-
- my $time = time;
- $ENV{DURING_INSTALL} = 1;
- pkgs::install($o->{prefix}, $o->{isUpgrade}, \@toInstall, $packages);
- delete $ENV{DURING_INSTALL};
- run_program::rooted_or_die($o->{prefix}, 'ldconfig') unless $::g_auto_install;
- log::l("Install took: ", formatTimeRaw(time - $time));
- install_any::log_sizes($o);
- scalar(@toInstall); #- return number of packages installed.
-}
-
-sub afterInstallPackages($) {
- my ($o) = @_;
-
- return if $::g_auto_install;
-
- die _("Some important packages didn't get installed properly.
-Either your cdrom drive or your cdrom is defective.
-Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"
-") if grep { m|read failed: Input/output error| } cat_("$o->{prefix}/root/drakx/install.log");
-
- if (arch() !~ /^sparc/) { #- TODO restore it as may be needed for sparc
- -x "$o->{prefix}/usr/bin/dumpkeys" or $::testing or die
-"Some important packages didn't get installed properly.
-
-Please switch to console 2 (using ctrl-alt-f2)
-and look at the log file /tmp/ddebug.log
-
-Consoles 1,3,4,7 may also contain interesting information";
- }
-
- #- why not? cuz weather is nice today :-) [pixel]
- common::sync(); common::sync();
-
- if (do {
- my $p = pkgs::packageByName($o->{packages}, 'devfsd');
- $p && $p->flag_installed
- }) {
- require bootloader;
- bootloader::may_append($o->{bootloader}, devfs => 'mount');
- }
-
- #- generate /etc/lvmtab needed for rc.sysinit
- run_program::rooted($o->{prefix}, 'vgscan') if -e '/etc/lvmtab';
-
- #- configure PCMCIA services if needed.
- modules::write_pcmcia($o->{prefix}, $o->{pcmcia});
-
- #- for mandrake_firstime
- touch "$o->{prefix}/var/lock/TMP_1ST";
-
- any::config_dvd($o->{prefix});
- any::config_mtools($o->{prefix});
-
- any::writeandclean_ldsoconf($o->{prefix});
-
- #- make sure wins is disabled in /etc/nsswitch.conf
- #- else if eth0 is not existing, glibc segfaults.
- substInFile { s/\s*wins// if /^\s*hosts\s*:/ } "$o->{prefix}/etc/nsswitch.conf";
-
- #- make sure some services have been enabled (or a catastrophic restart will occur).
- #- these are normally base package post install scripts or important services to start.
- run_program::rooted($o->{prefix}, "chkconfig", "--add", $_) foreach
- qw(random netfs network rawdevices sound kheader usb keytable syslog crond portmap);
-
- if ($o->{mouse}{device} =~ /ttyS/) {
- log::l("disabling gpm for serial mice (doesn't get along nicely with X)");
- run_program::rooted($o->{prefix}, "chkconfig", "--del", "gpm")
- }
-
- #- call update-menus at the end of package installation
- run_program::rooted($o->{prefix}, "update-menus");
-
- if ($o->{pcmcia}) {
- substInFile { s/.*(TaskBarShowAPMStatus).*/$1=1/ } "$o->{prefix}/usr/lib/X11/icewm/preferences";
- eval { cp_af("$o->{prefix}/usr/share/applnk/System/kapm.kdelnk",
- "$o->{prefix}/etc/skel/Desktop/Autostart/kapm.kdelnk") };
- }
-
- $o->install_urpmi;
-
- if ($o->{lang} =~ /^(zh_TW|th|vi|be|bg)/) {
- #- skip since we don't have the right font (it badly fails at least for zh_TW)
- } elsif (my $LANG = lang::lang2LANG($o->{lang})) {
- my $kdmrc = "$o->{prefix}/usr/share/config/kdm/kdmrc";
-
- my $kde_charset = lang::charset2kde_charset(lang::lang2charset($o->{lang}));
- my $welcome = c::to_utf8(_("Welcome to %s", '%n'));
- substInFile {
- s/^(GreetString)=.*/$1=$welcome/;
- s/^(Language)=.*/$1=$LANG/;
- if (!member($kde_charset, 'iso8859-1', 'iso8859-15')) {
- #- don't keep the default for those
- s/^(StdFont)=.*/$1=*,12,5,$kde_charset,50,0/;
- s/^(FailFont)=.*/$1=*,12,5,$kde_charset,75,0/;
- s/^(GreetFont)=.*/$1=*,24,5,$kde_charset,50,0/;
- }
- } "$o->{prefix}/usr/share/config/kdm/kdmrc";
-
- }
- install_any::disable_user_view($o->{prefix}) if $o->{security} >= 3 || $o->{authentication}{NIS};
- run_program::rooted($o->{prefix}, "kdeDesktopCleanup");
-
- foreach (list_skels($o->{prefix}, '.kde/share/config/kfmrc')) {
- my $found;
- substInFile {
- $found ||= /KFM Misc Defaults/;
- $_ .=
-"[KFM Misc Defaults]
-GridWidth=85
-GridHeight=70
-" if eof && !$found;
- } $_
- }
-
- #- move some file after an upgrade that may be seriously annoying.
- #- and rename saved files to .mdkgiorig.
- if ($o->{isUpgrade}) {
- my $pkg = pkgs::packageByName($o->{packages}, 'rpm');
- $pkg && ($pkg->flag_selected || $pkg->flag_installed) && $pkg->compare(">= 4.0") and pkgs::clean_old_rpm_db($o->{prefix});
-
- log::l("moving previous desktop files that have been updated to Trash of each user");
- install_any::kdemove_desktop_file($o->{prefix});
-
- foreach (@filesToSaveForUpgrade) {
- renamef("$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_.mdkgiorig")
- if -e "$o->{prefix}$_.mdkgisave";
- }
-
- foreach (@filesNewerToUseAfterUpgrade) {
- if (-e "$o->{prefix}/$_.rpmnew" && -e "$o->{prefix}/$_") {
- renamef("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgiorig");
- renamef("$o->{prefix}/$_.rpmnew", "$o->{prefix}/$_");
- }
- }
- }
-
- if ($o->{blank} || $o->{updatemodules}) {
- my @l = detect_devices::floppies_dev();
-
- foreach (qw(blank updatemodules)) {
- $o->{$_} eq "1" and $o->{$_} = $l[0] || die _("No floppy drive available");
- }
-
- $o->{blank} and $o->copyKernelFromFloppy();
- $o->{updatemodules} and $o->updateModulesFromFloppy();
- }
-}
-
-sub copyKernelFromFloppy {
- my ($o) = @_;
- return if $::testing || !$o->{blank};
-
- fs::mount($o->{blank}, "/floppy", "vfat", 0);
- eval { cp_af("/floppy/vmlinuz", "$o->{prefix}/boot/vmlinuz-default") };
- if ($@) {
- log::l("copying of /floppy/vmlinuz from blank modified disk failed: $@");
- }
- fs::umount("/floppy");
-}
-
-sub install_urpmi {
- my ($o) = @_;
-
- my $pkg = pkgs::packageByName($o->{packages}, 'urpmi');
- if ($pkg && ($pkg->flag_selected || $pkg->flag_installed)) {
- install_any::install_urpmi($o->{prefix},
- $::oem ? 'cdrom' : $o->{method}, #- HACK
- $o->{packages}{mediums});
- pkgs::saveCompssUsers($o->{prefix}, $o->{packages}, $o->{compssUsers}, $o->{compssUsersSorted});
- }
-
-
-}
-
-sub updateModulesFromFloppy {
- my ($o) = @_;
- return if $::testing || !$o->{updatemodules};
-
- fs::mount($o->{updatemodules}, "/floppy", "ext2", 0);
- foreach (glob_("$o->{prefix}/lib/modules/*")) {
- my ($kernelVersion) = m,lib/modules/(\S*),;
- log::l("examining updated modules for kernel $kernelVersion");
- if (-d "/floppy/$kernelVersion") {
- my @src_files = glob_("/floppy/$kernelVersion/*");
- my @dest_files = split "\n", `chroot $o->{prefix} find /lib/modules`;
- foreach my $s (@src_files) {
- log::l("found updatable module $s");
- my ($sfile, $sext) = $s =~ /([^\/\.]*\.o)(?:\.gz|\.bz2)?$/;
- my $qsfile = quotemeta $sfile;
- my $qsext = quotemeta $sext;
- foreach my $target (@dest_files) {
- $target =~ /$qsfile/ or next;
- eval { cp_af($s, $target) };
- if ($@) {
- log::l("updating module $target by $s failed: $@");
- } else {
- log::l("updating module $target by $s");
- }
- if ($target !~ /$qsfile$qsext$/) {
- #- extension differ, first rename target file correctly,
- #- then uncompress source file, then compress it as expected.
- my ($basetarget, $text) = $target =~ /(.*?)(\.gz|\.bz2)$/;
- rename $target, "$basetarget$sext";
- $sext eq '.gz' and run_program::run("gzip", "-d", "$basetarget$sext");
- $sext eq '.bz2' and run_program::run("bzip2", "-d", "$basetarget$sext");
- $text eq '.gz' and run_program::run("gzip", $basetarget);
- $text eq '.bz2' and run_program::run("bzip2", $basetarget);
- }
- }
- }
- }
- }
- fs::umount("/floppy");
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse($) {
- my ($o) = @_;
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
- my ($o) = @_;
- require network;
- network::configureNetwork2($o, $o->{prefix}, $o->{netc}, $o->{intf});
- if ($o->{method} =~ /ftp|http|nfs/) {
- $o->{netcnx}{type} = 'lan';
- foreach ("up", "down") {
- my $f = "$o->{prefix}/etc/sysconfig/network-scripts/net_cnx_$_";
- output $f, "\nif$_ eth0\n";
- chmod 0755, $f;
- }
- output "$o->{prefix}/etc/sysconfig/network-scripts/net_cnx_pg", "\n/usr/sbin/draknet\n";
- }
-}
-
-#------------------------------------------------------------------------------
-sub installCrypto {
- my ($o) = @_;
- my $u = $o->{crypto} or return; $u->{mirror} && $u->{packages} or return;
-
- upNetwork($o);
- require crypto;
- my @crypto_packages = crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});
- $o->pkg_install(@{$u->{packages}});
-}
-
-sub installUpdates {
- my ($o) = @_;
- my $u = $o->{updates} or return; $u->{updates} or return;
-
- upNetwork($o);
- require crypto;
- crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror}) and
- $o->pkg_install(@{$u->{packages} || []});
-
- #- re-install urpmi with update security medium.
- $o->install_urpmi;
-}
-
-sub summary {
- my ($o) = @_;
- configureTimezone($o);
- configurePrinter($o) if $o->{printer};
-}
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
- my ($o) = @_;
- install_any::preConfigureTimezone($o);
-
- $o->pkg_install('ntp') if $o->{timezone}{ntp};
-
- require timezone;
- timezone::write($o->{prefix}, $o->{timezone});
-}
-
-#------------------------------------------------------------------------------
-sub configureServices {
- my ($o) = @_;
- if ($o->{services}) {
- require services;
- services::doit($o, $o->{services}, $o->{prefix});
- }
-}
-#------------------------------------------------------------------------------
-sub configurePrinter {
- my($o) = @_;
- $o->do_pkgs->install('foomatic', 'printer-utils','printer-testpages',
- if_($o->do_pkgs->is_installed('gimp'), 'gimpprint'));
-
- require printer;
- eval { add2hash($o->{printer} ||= {}, printer::getinfo($o->{prefix})) }; #- get existing configuration.
-
- require printerdrake;
- printerdrake::install_spooler($o->{printer}, $o); #- not interactive...
-
- foreach (values %{$o->{printer}{configured} || {}}) {
- log::l("configuring printer queue " . $_->{queuedata}{queue} || $_->{QUEUE});
- #- when copy is so adulée (sorry french taste :-)
- #- and when there are some configuration in one place and in another place...
- $o->{printer}{currentqueue} = {};
- printer::copy_printer_params($_->{queuedata}, $o->{printer}{currentqueue});
- printer::copy_printer_params($_, $o->{printer});
- #- setup all configured queues, which is not the case interactively where
- #- only the working queue is setup on configuration.
- printer::configure_queue($o->{printer});
- }
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
- my ($o) = @_;
- my $p = $o->{prefix};
- my $u = $o->{superuser} ||= {};
- $o->{superuser}{name} = 'root';
- any::write_passwd_user($o->{prefix}, $o->{superuser}, $o->{authentication}{md5});
- delete $o->{superuser}{name};
-}
-
-#------------------------------------------------------------------------------
-
-sub addUser {
- my ($o) = @_;
- my $p = $o->{prefix};
- my $users = $o->{users} ||= [];
-
- my (%uids, %gids);
- foreach (glob_("$p/home")) { my ($u, $g) = (stat($_))[4,5]; $uids{$u} = 1; $gids{$g} = 1; }
-
- foreach (@$users) {
- $_->{home} ||= "/home/$_->{name}";
-
- my $u = $_->{uid} || ($_->{oldu} = (stat("$p$_->{home}"))[4]);
- my $g = $_->{gid} || ($_->{oldg} = (stat("$p$_->{home}"))[5]);
- #- search for available uid above 501 else initscripts may fail to change language for KDE.
- if (!$u || getpwuid($u)) { for ($u = 501; getpwuid($u) || $uids{$u}; $u++) {} }
- if (!$g ) { for ($g = 501; getgrgid($g) || $gids{$g}; $g++) {} }
-
- $_->{uid} = $u; $uids{$u} = 1;
- $_->{gid} = $g; $gids{$g} = 1;
-
- push @{$_->{groups} ||= []}, 'usb' if $o->{security} <= 3;
- }
-
- any::write_passwd_user($p, $_, $o->{authentication}{md5}) foreach @$users;
-
- local *F;
- open F, ">> $p/etc/group" or die "can't append to group file: $!";
- print F "$_->{name}:x:$_->{gid}:\n" foreach grep { ! getgrgid($_->{gid}) } @$users;
-
- foreach my $u (@$users) {
- if (! -d "$p$u->{home}") {
- my $mode = $o->{security} < 2 ? 0755 : 0750;
- eval { cp_af("$p/etc/skel", "$p$u->{home}") };
- if ($@) {
- log::l("copying of skel failed: $@"); mkdir("$p$u->{home}", $mode);
- } else {
- chmod $mode, "$p$u->{home}";
- }
- }
- require commands;
- eval { commands::chown_("-r", "$u->{uid}.$u->{gid}", "$p$u->{home}") }
- if $u->{uid} != $u->{oldu} || $u->{gid} != $u->{oldg};
- }
- any::addUsers($p, $users);
-
- $o->pkg_install("autologin") if $o->{autologin};
- any::set_autologin($p, $o->{autologin}, $o->{desktop});
-
- install_any::setAuthentication($o);
-
- install_any::disable_user_view($p) if @$users == ();
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk($) {
- my ($o) = @_;
- my $dev = $o->{mkbootdisk} or return;
-
- my @l = detect_devices::floppies_dev();
-
- $dev = shift @l || die _("No floppy drive available")
- if $dev eq "1"; #- special case meaning autochoose
-
- return if $::testing;
-
- require bootloader;
- bootloader::mkbootdisk($o->{prefix}, install_any::kernelVersion($o), $dev, $o->{bootloader}{perImageAppend});
- $o->{mkbootdisk} = $dev;
-}
-
-#------------------------------------------------------------------------------
-sub readBootloaderConfigBeforeInstall {
- my ($o) = @_;
- my ($image, $v);
-
- require bootloader;
- add2hash($o->{bootloader} ||= {}, bootloader::read($o->{prefix}, arch() =~ /sparc/ ? "/etc/silo.conf" : arch() =~ /ppc/ ? "/etc/yaboot.conf" : "/etc/lilo.conf"));
-
- #- since kernel or kernel-smp may not be upgraded, it should be checked
- #- if there is a need to update existing lilo.conf entries by following
- #- symlinks before kernel or other packages get installed.
- #- update everything that could be a filename (for following symlink).
- foreach my $e (@{$o->{bootloader}{entries}}) {
- while (my $v = readlink "$o->{prefix}/$e->{kernel_or_dev}") {
- $v = "/boot/$v" if $v !~ m|^/|; -e "$o->{prefix}$v" or last;
- log::l("renaming /boot/$e->{kernel_or_dev} entry by $v");
- $e->{kernel_or_dev} = $v;
- }
- while (my $v = readlink "$o->{prefix}/$e->{initrd}") {
- $v = "/boot/$v" if $v !~ m|^/|; -e "$o->{prefix}$v" or last;
- log::l("renaming /boot/$e->{initrd} entry by $v");
- $e->{initrd} = $v;
- }
- }
-}
-
-sub setupBootloaderBefore {
- my ($o) = @_;
-
- require bootloader;
- if (my @l = (grep { $_->{bus} eq 'ide' } detect_devices::burners(), detect_devices::raw_zips())) {
- bootloader::add_append($o->{bootloader}, $_->{device}, 'ide-scsi') foreach @l;
- }
- if ($o->{miscellaneous}{HDPARM}) {
- bootloader::add_append($o->{bootloader}, $_, 'autotune') foreach grep { /ide.*/ } all("/proc/ide");
- }
- if (grep { /mem=nopentium/ } cat_("/proc/cmdline")) {
- bootloader::add_append($o->{bootloader}, 'mem', 'nopentium');
- }
-
- if (arch() =~ /alpha/) {
- if (my $dev = fsedit::get_root($o->{fstab})) {
- $o->{bootloader}{boot} ||= "/dev/$dev->{rootDevice}";
- $o->{bootloader}{root} ||= "/dev/$dev->{device}";
- $o->{bootloader}{part_nb} ||= first($dev->{device} =~ /(\d+)/);
- }
- } else {
- #- check for valid fb mode to enable a default boot with frame buffer.
- my $vga = $o->{allowFB} && (!detect_devices::matching_desc('3D Rage LT') &&
- !detect_devices::matching_desc('Rage Mobility [PL]') &&
- !detect_devices::matching_desc('i740') &&
- !detect_devices::matching_desc('Matrox') &&
- !detect_devices::matching_desc('Tseng.*ET6\d00') &&
- !detect_devices::matching_desc('SiS.*SG86C2.5') &&
- !detect_devices::matching_desc('SiS.*559[78]') &&
- !detect_devices::matching_desc('SiS.*300') &&
- !detect_devices::matching_desc('SiS.*540') &&
- !detect_devices::matching_desc('SiS.*6C?326') &&
- !detect_devices::matching_desc('SiS.*6C?236') &&
- !detect_devices::matching_desc('Voodoo [35]|Voodoo Banshee') && #- 3d acceleration seems to bug in fb mode
- !detect_devices::matching_desc('8281[05].* CGC') #- i810 now have FB support during install but we disable it afterwards
- );
- my $force_vga = $o->{allowFB} && (detect_devices::matching_desc('SiS.*630') || #- SiS 630 need frame buffer.
- detect_devices::matching_desc('GeForce.*Integrated') #- needed for fbdev driver (hack).
- );
-
- #- propose the default fb mode for kernel fb, if aurora or bootsplash is installed.
- my $need_fb = grep {
- my $p = pkgs::packageByName($o->{packages}, $_);
- $p && $p->flag_installed;
- } 'Aurora', 'bootsplash';
- bootloader::suggest($o->{prefix}, $o->{bootloader}, $o->{all_hds}{hds}, $o->{fstab},
- ($force_vga || $vga && $need_fb) && $o->{vga}, $o->{meta_class} ne 'server');
- bootloader::suggest_floppy($o->{bootloader}) if $o->{security} <= 3 && arch() !~ /ppc/;
-
- $o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
- }
-}
-
-sub setupBootloader($) {
- my ($o) = @_;
- return if $::g_auto_install;
-
- if (arch() =~ /alpha/) {
- return if $::testing;
- my $b = $o->{bootloader};
- $b->{boot} or $o->ask_warn('', "Can't install aboot, not a bsd disklabel"), return;
-
- run_program::rooted($o->{prefix}, "swriteboot", $b->{boot}, "/boot/bootlx") or do {
- cdie "swriteboot failed";
- run_program::rooted($o->{prefix}, "swriteboot", "-f1", $b->{boot}, "/boot/bootlx");
- };
- run_program::rooted($o->{prefix}, "abootconf", $b->{boot}, $b->{part_nb});
-
- modules::load('loop');
- output "$o->{prefix}/etc/aboot.conf",
- map_index { -e "$o->{prefix}/boot/initrd-$_->[1]" ?
- "$::i:$b->{part_nb}$_->[0] root=$b->{root} initrd=/boot/initrd-$_->[1] $b->{perImageAppend}\n" :
- "$::i:$b->{part_nb}$_->[0] root=$b->{root} $b->{perImageAppend}\n" }
- map { run_program::rooted($o->{prefix}, "mkinitrd", "-f", "/boot/initrd-$_->[1]", "--ifneeded", $_->[1]) ;#or
- #unlink "$o->{prefix}/boot/initrd-$_->[1]";$_ } grep { $_->[0] && $_->[1] }
- $_ } grep { $_->[0] && $_->[1] }
- map { [ m|$o->{prefix}(/boot/vmlinux-(.*))| ] } glob_("$o->{prefix}/boot/vmlinux-*");
-# output "$o->{prefix}/etc/aboot.conf",
-# map_index { "$::i:$b->{part_nb}$_ root=$b->{root} $b->{perImageAppend}\n" }
-# map { /$o->{prefix}(.*)/ } eval { glob_("$o->{prefix}/boot/vmlinux*") };
- } else {
- require bootloader;
- bootloader::install($o->{prefix}, $o->{bootloader}, $o->{fstab}, $o->{all_hds}{hds});
- }
-}
-
-#------------------------------------------------------------------------------
-sub configureXBefore {
- my ($o) = @_;
- my $xkb = $o->{X}{keyboard}{xkb_keymap} || keyboard::keyboard2xkb($o->{keyboard});
- $xkb = '' if !($xkb && $xkb =~ /([^(]*)/ && -e "$o->{prefix}/usr/X11R6/lib/X11/xkb/symbols/$1");
- if (!$xkb && (my $f = keyboard::xmodmap_file($o->{keyboard}))) {
- cp_af($f, "$o->{prefix}/etc/X11/xinit/Xmodmap");
- $xkb = '';
- }
- {
- my $f = "$o->{prefix}/etc/sysconfig/i18n";
- setVarsInSh($f, add2hash_({ XKB_IN_USE => $xkb ? '': 'no' }, { getVarsFromSh($f) }));
- }
- $o->{X}{keyboard}{xkb_keymap} = $xkb;
- $o->{X}{mouse} = $o->{mouse};
- $o->{X}{wacom} = $o->{wacom};
-
- require Xconfig;
- Xconfig::getinfoFromDDC($o->{X});
- Xconfig::getinfoFromXF86Config($o->{X}, $o->{prefix}); #- take default from here at least.
-
- #- keep this here if the package has to be updated.
- $o->pkg_install("XFree86");
-}
-sub configureX {
- my ($o) = @_;
- $o->configureXBefore;
-
- require Xconfigurator;
- require class_discard;
- { local $::testing = 0; #- unset testing
- local $::auto = 1;
- $o->{X}{skiptest} = 1;
- Xconfigurator::main($o->{prefix}, $o->{X}, class_discard->new, $o->do_pkgs,
- { allowFB => $o->{allowFB},
- allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}),
- });
- }
- $o->configureXAfter;
-}
-sub configureXAfter {
- my ($o) = @_;
- if ($o->{X}{card}{server} eq 'FBDev') {
- unless (install_any::setupFB($o, Xconfigurator::getVGAMode($o->{X}))) {
- log::l("disabling automatic start-up of X11 if any as setup framebuffer failed");
- any::runlevel($o->{prefix}, 3) unless $::testing; #- disable automatic start-up of X11 on error.
- }
- }
- if ($o->{X}{default_depth} >= 16 && $o->{X}{card}{default_wres} >= 1024) {
- log::l("setting large icon style for kde");
- install_any::kderc_largedisplay($o->{prefix});
- }
-}
-
-#------------------------------------------------------------------------------
-sub miscellaneousBefore {
- my ($o) = @_;
-
- my %s = getVarsFromSh("$o->{prefix}/etc/sysconfig/system");
- $o->{miscellaneous}{HDPARM} = $s{HDPARM} if exists $s{HDPARM};
- $o->{security} ||= any::get_secure_level($o->{prefix}) || ($o->{meta_class} eq 'server' ? 3 : 2);
-
- log::l("security $o->{security}");
-
- add2hash_($o->{miscellaneous} ||= {}, { numlock => !detect_devices::isLaptop() });
-}
-sub miscellaneous {
- my ($o) = @_;
- #- keep some given parameters
- #-TODO
-}
-sub miscellaneousAfter {
- my ($o) = @_;
- add2hash_ $o, { useSupermount => 1 && $o->{security} < 4 && arch() !~ /sparc/ && !$::corporate };
-
- $ENV{SECURE_LEVEL} = $o->{security}; #- deprecated with chkconfig 1.3.4-2mdk, uses /etc/sysconfig/msec
-
- addToBeDone {
- mkdir_p("$o->{prefix}/etc/security/msec");
- symlink "server.$o->{security}", "$o->{prefix}/etc/security/msec/server" if $o->{security} > 3;
- setVarsInSh("$o->{prefix}/etc/sysconfig/msec", { SECURE_LEVEL => $o->{security} });
- } 'formatPartitions';
-
- addToBeDone {
- setVarsInSh("$o->{prefix}/etc/sysconfig/system", {
- CLASS => $::expert && 'expert' || 'beginner',
- SECURITY => $o->{security},
- META_CLASS => $o->{meta_class} || 'PowerPack',
- });
- substInFile { s/KEYBOARD_AT_BOOT=.*/KEYBOARD_AT_BOOT=yes/ } "$o->{prefix}/etc/sysconfig/usb" if detect_devices::usbKeyboards();
-
- } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall {
- my ($o) = @_;
- eval {
- my $report = '/root/drakx/report.bug';
- output "$o->{prefix}$report", install_any::report_bug($o->{prefix});
- run_program::rooted($o->{prefix}, 'gzip', $report);
- };
- install_any::getAndSaveAutoInstallFloppy($o, 1, "$o->{prefix}/root/drakx/replay_install.img" );
- eval { output "$o->{prefix}/root/drakx/README", "This directory contains several installation-related files,
-mostly log files (very useful if you ever report a bug!).
-
-Beware that some Mandrake tools rely on the contents of some
-of these files... so remove any file from here at your own
-risk!
-" };
- install_any::unlockCdrom;
- install_any::log_sizes($o);
-}
-
-#------------------------------------------------------------------------------
-sub hasNetwork {
- my ($o) = @_;
- $o->{netcnx}{type} && $o->{netc}{NETWORKING} ne 'no' and return 1;
- log::l("no network seems to be configured for internet ($o->{netcnx}{type},$o->{netc}{NETWORKING})");
- 0;
-}
-
-#------------------------------------------------------------------------------
-sub upNetwork {
- my ($o, $pppAvoided) = @_;
-
- #- do not destroy this file if prefix is '' or even '/' (could it happens ?).
- if (length($o->{prefix}) > 1) {
- symlinkf("$o->{prefix}/etc/$_", "/etc/$_") foreach (qw(resolv.conf protocols services));
- }
- member($o->{method}, qw(ftp http nfs)) and return 1;
- modules::write_conf($o->{prefix});
- if (hasNetwork($o)) {
- if ($o->{netcnx}{type} =~ /adsl|lan|cable/) {
- require network::netconnect;
- network::netconnect::start_internet($o);
- return 1;
- } elsif (!$pppAvoided) {
- eval { modules::load(qw(serial ppp bsd_comp ppp_deflate)) };
- run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "start");
- require network::netconnect;
- network::netconnect::start_internet($o);
- return 1;
- }
- }
- $::testing;
-}
-
-#------------------------------------------------------------------------------
-sub downNetwork {
- my ($o, $costlyOnly) = @_;
-
- $o->{method} eq "ftp" || $o->{method} eq "http" || $o->{method} eq "nfs" and return 1;
- modules::write_conf($o->{prefix});
- if (hasNetwork($o)) {
- if (!$costlyOnly) {
- require network::netconnect;
- network::netconnect::stop_internet($o);
- return 1;
- } elsif ($o->{netc}{type} !~ /adsl|lan|cable/) {
- require network::netconnect;
- network::netconnect::stop_internet($o);
- run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "stop");
- eval { modules::unload(qw(ppp_deflate bsd_comp ppp serial)) };
- return 1;
- }
- }
- $::testing;
-}
-
-#------------------------------------------------------------------------------
-sub cleanIfFailedUpgrade($) {
- my ($o) = @_;
-
- #- if an upgrade has failed, there should be .mdkgisave files around.
- if ($o->{isUpgrade}) {
- foreach (@filesToSaveForUpgrade) {
- if (-e "$o->{prefix}/$_" && -e "$o->{prefix}/$_.mdkgisave") {
- rename "$o->{prefix}/$_", "$o->{prefix}/$_.mdkginew"; #- keep new files around in case !
- rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_";
- }
- }
- }
-}
-
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_steps_auto_install.pm b/perl-install/install_steps_auto_install.pm
deleted file mode 100644
index cd0282800..000000000
--- a/perl-install/install_steps_auto_install.pm
+++ /dev/null
@@ -1,111 +0,0 @@
-package install_steps_auto_install; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $graphical @graphical_steps);
-
-@ISA = qw(install_steps);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_steps;
-
-sub new {
- my ($type, $o) = @_;
-
- # Handle legacy options
- $o->{interactive} ||= 'gtk' if $graphical || !is_empty_array_ref($o->{interactiveSteps});
- push @{$o->{interactiveSteps}}, qw(installPackages exitInstall), @graphical_steps;
-
- if ($o->{interactive}) {
- my $interactiveClass = "install_steps_$o->{interactive}";
- require"$interactiveClass.pm"; #- no space to skip perl2fcalls
-
- @ISA = ($interactiveClass, @ISA);
-
- for (my $f = $o->{steps}{first}; $f; $f = $o->{steps}{$f}{next}) {
- my $auto_name = member($f, @{$o->{interactiveSteps}}) ? 'noauto' : 'auto';
- $o->{steps}{$f}{$auto_name} = 1;
- }
-
- goto &{$::{$interactiveClass . "::"}{new}};
- } else {
- @ISA = ('install_steps_auto_install_non_interactive', @ISA);
- (bless {}, ref $type || $type)->install_steps::new($o);
- }
-}
-
-
-sub exitInstall {
- my ($o, $alldone) = @_;
- return if $o->{autoExitInstall};
-
- if ($o->{interactive}) {
- $o->SUPER::exitInstall($alldone);
- } else {
- install_steps::exitInstall($o);
- print "\a";
- print "Auto installation complete (the postInstall is not done yet though)\n";
- print "Press <Enter> to reboot\n";
- <STDIN>;
- }
-}
-
-
-#-######################################################################################
-#- install_steps_auto_install_non_interactive package
-#-######################################################################################
-package install_steps_auto_install_non_interactive;
-
-use install_steps;
-use lang;
-use modules;
-use common;
-use log;
-
-sub configureNetwork {
- my ($o) = @_;
- modules::load_category('network/main|usb');
- goto &install_steps::configureNetwork;
-}
-
-sub enteringStep {
- my ($o, $step) = @_;
- my ($s, $t) = (__("Entering step `%s'\n"), $o->{steps}{$step}{text});
- ($s, $t) = (translate($s), translate($t)) if $ENV{LANG} !~ /ja|ko|zh/;
- print sprintf($s, $t);
- $o->install_steps::enteringStep($step);
-}
-
-sub ask_warn {
- log::l(ref $_[1] ? join " ", @{$_[1]} : $_[1]);
-}
-
-sub wait_message {}
-
-sub errorInStep {
- print "error :(\n";
- print "switch to console f2 for a shell\n";
- print "Press <Enter> to reboot\n";
- <STDIN>;
- c::_exit(0);
-}
-
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
- my ($o) = @_;
- $o->install_steps::selectLanguage;
- lang::load_console_font($o->{lang});
-}
-
-sub installPackages {
- my ($o, $packages) = @_;
- catch_cdie { $o->install_steps::installPackages($packages) } sub { print "$@\n"; 1 }
-}
-
-1;
diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm
deleted file mode 100644
index 36c7139ac..000000000
--- a/perl-install/install_steps_gtk.pm
+++ /dev/null
@@ -1,695 +0,0 @@
-package install_steps_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_gtk);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use install_steps_interactive;
-use interactive_gtk;
-use common;
-use my_gtk qw(:helpers :wrappers);
-use Gtk;
-use devices;
-use modules;
-use install_gtk;
-use install_any;
-use mouse;
-use help;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub new($$) {
- my ($type, $o) = @_;
-
- my $old = $SIG{__DIE__};
- $SIG{__DIE__} = sub { $_[0] !~ /my_gtk\.pm/ and goto $old };
-
- $ENV{DISPLAY} ||= $o->{display} || ":0";
- unless ($::testing) {
- if ($ENV{DISPLAY} eq ":0" && !$::live) {
- my $f = "/tmp/Xconf";
- install_gtk::createXconf($f, @{$o->{mouse}}{"XMOUSETYPE", "device"}, $o->{wacom}[0]);
- devices::make("/dev/kbd");
-
- local (*T1, *T2);
- open T1, ">/dev/tty5";
- open T2, ">/dev/tty6";
-
- my $launchX = sub {
- my $ok = 1;
- my $xpmac_opts = cat_("/proc/cmdline");
- unless (-d "/var/log" ) { mkdir("/var/log"); }
- local $SIG{CHLD} = sub { $ok = 0 if waitpid(-1, c::WNOHANG()) > 0 };
- unless (fork) {
- exec $_[0], (arch() =~ /^sparc/ || arch() eq "ppc" ? () : ("-kb")), "-dpms","-s" ,"240",
- ($_[0] =~ /Xpmac/ ? $xpmac_opts !~ /ofonly/ ? ("-mode", "17", "-depth", "32") : ("-mach64"):()),
- ($_[0] =~ /Xsun/ || $_[0] =~ /Xpmac/ ? ("-fp", "/usr/X11R6/lib/X11/fonts:unscaled") :
- ("-allowMouseOpenFail", "-xf86config", $f)) or exit 1;
- }
- foreach (1..60) {
- sleep 1;
- log::l("Server died"), return 0 if !$ok;
- if (c::Xtest($ENV{DISPLAY})) {
- fork || exec("aewm-drakx") || exec("true");
- return 1;
- }
- }
- log::l("Timeout!!");
- 0;
- };
- my @servers = qw(FBDev VGA16); #-)
- if (arch() eq "alpha") {
- require Xconfigurator;
- my $card = Xconfigurator::cardConfigurationAuto();
- Xconfigurator::updateCardAccordingName($card, $card->{type}) if $card && $card->{type};
- @servers = $card->{server} || "TGA";
- #-@servers = qw(SVGA 3DLabs TGA)
- } elsif (arch() =~ /^sparc/) {
- local $_ = cat_("/proc/fb");
- if (/Mach64/) { @servers = qw(Mach64) }
- elsif (/Permedia2/) { @servers = qw(3DLabs) }
- else { @servers = qw(Xsun24) }
- } elsif (arch() =~ /ia64/) {
- @servers= 'XFree86';
- } elsif (arch() eq "ppc") {
- @servers = qw(Xpmac);
- }
-
- foreach (@servers) {
- log::l("Trying with server $_");
- my $dir = "/usr/X11R6/bin";
- my $prog = /Xsun|Xpmac|XFree86/ ? $_ : "XF86_$_";
- unless (-x "$dir/$prog") {
- unlink $_ foreach glob_("$dir/X*");
- install_any::getAndSaveFile("Mandrake/mdkinst$dir/$prog", "$dir/$prog") or die "failed to get server $prog: $!";
- chmod 0755, "$dir/$prog";
- }
- if (/FB/) {
- !$o->{vga16} && $o->{allowFB} or next;
-
- $o->{allowFB} = &$launchX($prog) #- keep in mind FB is used.
- and goto OK;
- } else {
- $o->{vga16} = 1 if /VGA16/;
- &$launchX($prog) and goto OK;
- }
- }
- return undef;
- }
- }
- OK:
- install_gtk::init_sizes();
- install_gtk::default_theme($o);
- install_gtk::create_logo_window($o);
-
- $my_gtk::force_center = [ $::rootwidth - $::windowwidth, $::logoheight, $::windowwidth, $::windowheight ];
-
- $o = (bless {}, ref $type || $type)->SUPER::new($o);
- $o->interactive_gtk::new;
- $o;
-}
-
-sub enteringStep {
- my ($o, $step) = @_;
-
- printf "Entering step `%s'\n", $o->{steps}{$step}{text};
- $o->SUPER::enteringStep($step);
- install_gtk::create_steps_window($o);
- install_gtk::create_help_window($o);
-}
-sub leavingStep {
- my ($o, $step) = @_;
- $o->SUPER::leavingStep($step);
-}
-
-
-sub charsetChanged {
- my ($o) = @_;
- Gtk->set_locale;
- install_gtk::install_theme($o);
- install_gtk::create_steps_window($o);
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
- my ($o, $first_time) = @_;
- $o->SUPER::selectLanguage;
-
- $o->ask_warn('',
-_("Your system is low on resources. You may have some problem installing
-Mandrake Linux. If that occurs, you can try a text install instead. For this,
-press `F1' when booting on CDROM, then enter `text'.")) if $first_time && availableRamMB() < 60; # 60MB
-
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass1 {
- my ($o, $verif, $l, $def, $l2, $def2) = @_;
- $::live || @$l == 1 and return $o->SUPER::selectInstallClass1($verif, $l, $def, $l2, $def2);
-
- my $w = my_gtk->new(_("Install Class"));
- my $focused;
- gtkadd($w->{window},
- gtkpack($w->create_box_with_title(_("Please choose one of the following classes of installation:")),
- (my @radios = gtkradio($def, @$l)),
- gtkadd(create_vbox(),
- map { my $v = $_;
- my $b = new Gtk::Button(translate($_));
- $focused = $b if $_ eq $def2;
- gtksignal_connect($b, "clicked" => sub { $w->{retval} = $v; Gtk->main_quit });
- } @$l2)
- ));
- $focused->grab_focus if $focused;
- $w->main;
-
- mapn { $verif->($_[1]) if $_[0]->active } \@radios, $l;
- install_gtk::create_steps_window($o);
-
- $w->{retval};
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
- my ($o, $force) = @_;
- my %old = %{$o->{mouse}};
- $o->SUPER::selectMouse($force) or return;
- my $mouse = $o->{mouse};
- $mouse->{type} eq 'none' ||
- $old{type} eq $mouse->{type} &&
- $old{name} eq $mouse->{name} &&
- $old{device} eq $mouse->{device} && !$force and return;
-
- local $my_gtk::grab = 1; #- unsure a crazy mouse don't go wild clicking everywhere
-
- while (1) {
- log::l("telling X server to use another mouse");
- eval { modules::load('serial') } if $mouse->{device} =~ /ttyS/;
-
- if (!$::testing) {
- devices::make($mouse->{device});
- symlinkf($mouse->{device}, "/dev/mouse");
- c::setMouseLive($ENV{DISPLAY}, mouse::xmouse2xId($mouse->{XMOUSETYPE}), $mouse->{nbuttons} < 3);
- }
- mouse::test_mouse_install($mouse) and return;
- $o->SUPER::selectMouse(1);
- $mouse = $o->{mouse};
- }
-}
-
-#------------------------------------------------------------------------------
-sub chooseSizeToInstall {
- my ($o, $packages, $min_size, $def_size, $max_size_, $availableC, $individual) = @_;
- my $max_size = min($max_size_, $availableC);
- my $enough = $max_size == $max_size_;
- my $percentage = int 100 * $max_size / $max_size_;
-
- #- don't ask anything if the difference between min and max is too small
- log::l("chooseSizeToInstall: min_size=$min_size, def_size=$def_size, max_size=$max_size_, available=$availableC");
- return $max_size if $min_size && $max_size / $min_size < 1.05;
-
- log::l("choosing size to install between $min_size and $max_size");
- my $w = my_gtk->new('');
- my $adj = create_adjustment(int(100 * $def_size / $max_size_), $min_size * 100 / $max_size_, $percentage);
- my $spin = gtkset_usize(new Gtk::SpinButton($adj, 0, 0), 20, 0);
- my $val;
-
- require pkgs;
- gtkadd($w->{window},
- gtkpack(new Gtk::VBox(0,20),
- _("The total size for the groups you have selected is approximately %d MB.\n", pkgs::correctSize($max_size_ / sqr(1024))) .
- ($enough ?
-_("If you wish to install less than this size,
-select the percentage of packages that you want to install.
-
-A low percentage will install only the most important packages;
-a percentage of 100%% will install all selected packages.") :
-_("You have space on your disk for only %d%% of these packages.
-
-If you wish to install less than this,
-select the percentage of packages that you want to install.
-A low percentage will install only the most important packages;
-a percentage of %d%% will install as many packages as possible.", $percentage, $percentage))
-. ($individual ? "\n\n" . _("You will be able to choose them more specifically in the next step.") : ''),
- create_packtable({},
- [ _("Percentage of packages to install") . ' ', $spin, "%", my $mb = new Gtk::Label ],
- [ undef, new Gtk::HScrollbar($adj) ],
- ),
- create_okcancel($w)
- )
- );
- $spin->signal_connect(changed => my $changed = sub {
- $val = $spin->get_value_as_int / 100 * $max_size_;
- $mb->set(sprintf("(%dMB)", pkgs::correctSize($val / sqr(1024))));
- }); &$changed();
- $spin->signal_connect(activate => sub { $w->{retval} = 1; Gtk->main_quit });
- $spin->grab_focus();
- $w->main and $val + 1; #- add a single byte (hack?) to make selection of 0 bytes ok.
-}
-
-sub reallyChooseGroups {
- my ($o, $size_to_display, $individual, $val) = @_;
-
- my $w = my_gtk->new('');
- my $tips = new Gtk::Tooltips;
- my $w_size = new Gtk::Label(&$size_to_display);
-
- my $entry = sub {
- my ($e) = @_;
- my $text = translate($o->{compssUsers}{$e}{label});
- my $help = translate($o->{compssUsers}{$e}{descr});
-
- my $file = do {
- my $f = "$ENV{SHARE_PATH}/icons/" . ($o->{compssUsers}{$e}{icons} || 'default');
- -e "$f.png" or $f .= "_section";
- -e "$f.png" or $f = "$ENV{SHARE_PATH}/icons/default_section";
- "$f.png";
- };
- my $check = Gtk::CheckButton->new($text);
- $check->set_active($val->{$e});
- $check->signal_connect(clicked => sub {
- $val->{$e} = $check->get_active;
- $w_size->set(&$size_to_display);
- });
- gtkset_tip($tips, $check, $help);
- gtkpack_(new Gtk::HBox(0,0), 0, gtkpng($file), 1, $check);
- #$check;
- };
- my $entries_in_path = sub {
- my ($path) = @_;
- translate($path), map { $entry->($_) } grep { $o->{compssUsers}{$_}{path} eq $path } @{$o->{compssUsersSorted}};
- };
- gtkadd($w->{window},
- gtkpack($w->create_box_with_title(_("Package Group Selection")),
- gtkpack_(new Gtk::VBox(0,0),
- 1, gtkpack_(new Gtk::HBox(0,0),
- $o->{meta_class} eq 'server' ? (
- 1, gtkpack(new Gtk::VBox(0,0),
- $entries_in_path->('Server'),
- ),
- 1, gtkpack(new Gtk::VBox(0,0),
- $entries_in_path->('Graphical Environment'),
- '',
- $entries_in_path->('Development'),
- '',
- $entries_in_path->('Utilities'),
- ),
- ) : (
- 1, gtkpack(new Gtk::VBox(0,0),
- $entries_in_path->('Workstation'),
- '',
- $entry->('Development|Development'),
- $entry->('Development|Documentation'),
- ),
- 0, gtkpack(new Gtk::VBox(0,0),
- $entries_in_path->('Server'),
- '',
- $entries_in_path->('Graphical Environment'),
- ),
- ),
- )),
- '',
- gtkadd(new Gtk::HBox(0,0),
- $w_size,
- if_($individual, do {
- my $check = Gtk::CheckButton->new(_("Individual package selection"));
- $check->set_active($$individual);
- $check->signal_connect(clicked => sub { $$individual = $check->get_active });
- $check;
- }),
- gtksignal_connect(new Gtk::Button(_("Ok")), clicked => sub { Gtk->main_quit }),
- ),
- ),
- );
- $w->{rwindow}->set_default_size($::windowwidth * 0.8, $::windowheight * 0.8);
- $w->main;
- 1;
-}
-
-
-sub choosePackagesTree {
- my ($o, $packages, $limit_to_medium) = @_;
-
- my $available = install_any::getAvailableSpace($o);
- my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-
- my $common; $common = { get_status => sub {
- my $size = pkgs::selectedSize($packages);
- _("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available / sqr(1024));
- },
- node_state => sub {
- my $p = pkgs::packageByName($packages,$_[0]) or return;
- pkgs::packageMedium($packages, $p)->{selected} or return;
- $p->flag_base and return 'base';
- $p->flag_installed and return 'installed';
- $p->flag_selected and return 'selected';
- return 'unselected';
- },
- build_tree => sub {
- my ($add_node, $flat) = @_;
- if ($flat) {
- foreach (sort map { $_->name } grep { !$limit_to_medium || pkgs::packageMedium($packages, $_) }
- @{$packages->{depslist}}) {
- $add_node->($_, undef);
- }
- } else {
- foreach my $root (@{$o->{compssUsersSorted}}) {
- my (%fl, @firstchoice, @others);
- #$fl{$_} = $o->{compssUsersChoice}{$_} foreach @{$o->{compssUsers}{$root}{flags}}; #- FEATURE:improve choce of packages...
- $fl{$_} = 1 foreach @{$o->{compssUsers}{$root}{flags}};
- foreach my $p (@{$packages->{depslist}}) {
- !$limit_to_medium || pkgs::packageMedium($packages, $p) == $limit_to_medium or next;
- my @flags = $p->rflags;
- next if !($p->rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags);
- $p->rate >= 3 ?
- push(@firstchoice, $p->name) :
- push(@others, $p->name);
- }
- my $root2 = join('|', map { translate($_) } split('\|', $root));
- $add_node->($_, $root2 ) foreach sort @firstchoice;
- $add_node->($_, $root2 . '|' . _("Other")) foreach sort @others;
- }
- }
- },
- get_info => sub {
- my $p = pkgs::packageByName($packages, $_[0]) or return '';
- pkgs::extractHeaders($o->{prefix}, [$p], $packages->{mediums});
-
- my $imp = translate($pkgs::compssListDesc{$p->flag_base ? 5 : $p->rate});
-
- my $info = $@ ? _("Bad package") :
- (_("Name: %s\n", $p->name) .
- _("Version: %s\n", $p->version . '-' . $p->release) .
- _("Size: %d KB\n", $p->size / 1024) .
- ($imp && _("Importance: %s\n", $imp)) . "\n" .
- formatLines($p->description));
- return $info;
- },
- toggle_nodes => sub {
- my $set_state = shift @_;
- my @n = map { pkgs::packageByName($packages, $_) } @_;
- my %l;
- my $isSelection = !$n[0]->flag_selected;
- foreach (@n) {
- #pkgs::togglePackageSelection($packages, $_, my $l = {});
- #@l{grep {$l->{$_}} keys %$l} = ();
- pkgs::togglePackageSelection($packages, $_, \%l);
- }
- if (my @l = map { $packages->{depslist}[$_]->name } keys %l) {
- #- check for size before trying to select.
- my $size = pkgs::selectedSize($packages);
- foreach (@l) {
- my $p = pkgs::packageByName($packages, $_);
- $p->flag_selected or $size += $p->size;
- }
- if (pkgs::correctSize($size / sqr(1024)) > $available / sqr(1024)) {
- return $o->ask_warn('', _("You can't select this package as there is not enough space left to install it"));
- }
-
- @l > @n && $common->{state}{auto_deps} and
- $o->ask_okcancel('', [ $isSelection ?
- _("The following packages are going to be installed") :
- _("The following packages are going to be removed"),
- common::formatList(20, sort @l) ], 1) || return;
- if ($isSelection) {
- pkgs::selectPackage($packages, $_) foreach @n;
- } else {
- pkgs::unselectPackage($packages, $_) foreach @n;
- }
- foreach (@l) {
- my $p = pkgs::packageByName($packages, $_);
- $set_state->($_, $p->flag_selected ? 'selected' : 'unselected');
- }
- } else {
- $o->ask_warn('', _("You can't select/unselect this package"));
- }
- },
- grep_allowed_to_toggle => sub {
- grep { $_ ne _("Other") && !pkgs::packageByName($packages, $_)->flag_base } @_;
- },
- grep_unselected => sub {
- grep { !pkgs::packageByName($packages, $_)->flag_selected } @_;
- },
- check_interactive_to_toggle => sub {
- my $p = pkgs::packageByName($packages, $_[0]) or return;
- if ($p->flag_base) {
- $o->ask_warn('', _("This is a mandatory package, it can't be unselected"));
- } elsif ($p->flag_installed) {
- $o->ask_warn('', _("You can't unselect this package. It is already installed"));
- } elsif ($p->flag_selected && $p->flag_installed) {
- if ($::expert) {
- $o->ask_yesorno('', _("This package must be upgraded.\nAre you sure you want to deselect it?")) or return;
- return 1;
- } else {
- $o->ask_warn('', _("You can't unselect this package. It must be upgraded"));
- }
- } else { return 1; }
- return;
- },
- auto_deps => _("Show automatically selected packages"),
- ok => _("Install"),
- cancel => $limit_to_medium && _("Cancel"),
- icons => [ { icon => 'floppy',
- help => _("Load/Save on floppy"),
- wait_message => _("Updating package selection"),
- code => sub { $o->loadSavePackagesOnFloppy($packages); 1; },
- },
- if_(0,
- { icon => 'feather',
- help => _("Minimal install"),
- code => sub {
-
- install_any::unselectMostPackages($o);
- pkgs::setSelectedFromCompssList($packages, { SYSTEM => 1 }, 4, $availableCorrected);
- 1;
- } }),
- ],
- state => {
- auto_deps => 1,
- flat => $limit_to_medium,
- },
- };
-
- $o->set_help('choosePackagesTree');
- $o->ask_browse_tree_info('', _("Choose the packages you want to install"), $common);
-}
-
-#------------------------------------------------------------------------------
-sub beforeInstallPackages {
- my ($o) = @_;
- $o->SUPER::beforeInstallPackages;
- install_any::copy_advertising($o);
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
- my ($o, $packages) = @_;
-
- my ($current_total_size, $last_size, $nb, $total_size, $start_time, $last_dtime, $trans_progress_total);
-
- my $w = my_gtk->new(_("Installing"));
- $w->sync;
- my $text = new Gtk::Label;
- my ($advertising, $change_time, $i);
- my $show_advertising if 0;
- $show_advertising = to_bool(@install_any::advertising_images) if !defined $show_advertising;
- my ($msg, $msg_time_remaining, $msg_time_total) = map { new Gtk::Label($_) } '', (_("Estimating")) x 2;
- my ($progress, $progress_total) = map { new Gtk::ProgressBar } (1..2);
- $w->{rwindow}->set_policy(1, 1, 1);
- gtkadd($w->{window}, my $box = new Gtk::VBox(0,10));
- $box->pack_end(gtkshow(gtkpack(gtkset_usize(new Gtk::VBox(0,5), $::windowwidth * 0.8, 0),
- $msg, $progress,
- create_packtable({},
- [_("Time remaining "), $msg_time_remaining],
-# [_("Total time "), $msg_time_total],
- ),
- $text,
- $progress_total,
- gtkadd(create_hbox(),
- my $cancel = new Gtk::Button(_("Cancel")),
- my $details = new Gtk::Button(_("Details")),
- ),
- )), 0, 1, 0);
- $details->hide if !@install_any::advertising_images;
- $w->sync;
- $msg->set(_("Please wait, preparing installation..."));
- gtkset_mousecursor_normal($cancel->window);
- gtkset_mousecursor_normal($details->window);
- my $advertize = sub {
- @install_any::advertising_images or return;
- $show_advertising ? $_->hide : $_->show foreach $msg, $progress, $text;
- gtkdestroy($advertising) if $advertising;
- if ($show_advertising && $_[0]) {
- $change_time = time();
- my $f = $install_any::advertising_images[$i++ % @install_any::advertising_images];
- log::l("advertising $f");
- my $pl = $f; $pl =~ s/\.png$/\.pl/;
- my $icon_name = $f; $icon_name =~ s/\.png$/_icon\.png/;
- my ($draw_text, $width, $height, @data, $icon, $icon_dx, $icon_dy, $icon_px);
- -e $pl and $draw_text = 1;
- eval(cat_($pl)) if $draw_text;
- my ($pix, undef) = gtkcreate_png($f);
- if ($icon) {
- ($icon_px, undef) = gtkcreate_png($icon_name);
- }
- my $dbl_area;
- my $darea = new Gtk::DrawingArea;
- gtkpack($box, $advertising = !$draw_text ?
- gtkpng($f) :
- gtksignal_connect(gtkset_usize($darea, $width, $height), expose_event => sub {
- my ($dx, $dy) = ($darea->allocation->[2], $darea->allocation->[3]);
- if (!defined($dbl_area)) {
- $dbl_area = new Gtk::Gdk::Pixmap($darea->window, $dx, $dy);
- $dbl_area->draw_rectangle($darea->style->bg_gc('active'), 1, 0, 0, $dx, $dy);
- $dbl_area->draw_pixmap($darea->style->bg_gc('normal'),
- $pix, 0, 0, ($dx-$width)/2, 0, $width, $height);
- my $gc_text = new Gtk::Gdk::GC($darea->window);
- $gc_text->set_foreground(gtkcolor(65535, 65535, 65535));
- my $yicon = 0;
- my $decy = 0;
- my $first = 1;
- foreach (@data) {
- my ($text, $x, $y, $area_width, $area_height, $bold) = @$_;
- my ($width, $height, $lines, $widths, $heights, $ascents, $descents) =
- get_text_coord ($text, $darea, $area_width, $area_height, 1, 0, 1, 1);
- if ($first && $icon) {
- my $iconx = ($dx-$width)/2 + $x + ${$widths}[0] - $icon_dx;
- my $icony = $y + ${$heights}[0] - $icon_dy/2;
- $icony > 0 or $icony = 0;
- $dbl_area->draw_pixmap($darea->style->bg_gc('normal'), $icon_px, 0, 0,
- $iconx, $icony, $icon_dx, $icon_dy
- );
- $yicon = $icony + $icon_dy;
- }
- my $i = 0;
- $yicon > $y + ${$heights}[0] and $decy = $yicon - ($y + ${$heights}[$i]);
- foreach (@{$lines}) {
- $dbl_area->draw_string($darea->style->font, $gc_text,
- ($dx-$width)/2 + $x + ${$widths}[$i], ( $first ? 0 : $decy ) + $y + ${$heights}[$i], $_);
- $bold and $dbl_area->draw_string($darea->style->font, $gc_text,
- ($dx-$width)/2 + $x + ${$widths}[$i] + 1, ( $first ? 0 : $decy ) + $y + ${$heights}[$i], $_);
- $i++;
- }
- $first = 0;
- }
- }
- $darea->window->draw_pixmap($darea->style->bg_gc('normal'),
- $dbl_area, 0, 0, 0, 0, $dx, $dy);
- }));
- } else {
- $advertising = undef;
- }
- };
-
- $cancel->signal_connect(clicked => sub { $pkgs::cancel_install = 1 });
- $details->signal_connect(clicked => sub {
- invbool \$show_advertising;
- $advertize->(1);
- });
- $advertize->();
-
- my $oldInstallCallback = \&pkgs::installCallback;
- local *pkgs::installCallback = sub {
- my ($data, $type, $id, $subtype, $amount, $total) = @_;
- if ($type eq 'user' && $subtype eq 'install') {
- #- $amount and $total are used to return number of package and total size.
- $nb = $amount;
- $total_size = $total; $current_total_size = 0;
- $start_time = time();
- $msg->set(_("%d packages", $nb));
- $w->flush;
- } elsif ($type eq 'inst' && $subtype eq 'start') {
- $progress->update(0);
- my $p = $data->{depslist}[$id];
- $msg->set(_("Installing package %s", $p->name));
- $current_total_size += $last_size;
- $last_size = $p->size;
- $text->set((split /\n/, $p->summary)[0] || '');
- $advertize->(1) if $show_advertising && $total_size > 20_000_000 && time() - $change_time > 20;
- $w->flush;
- } elsif ($type eq 'inst' && $subtype eq 'progress') {
- $progress->update($total ? $amount / $total : 0);
-
- my $dtime = time() - $start_time;
- my $ratio =
- $total_size == 0 ? 0 :
- pkgs::size2time($current_total_size + $amount, $total_size) / pkgs::size2time($total_size, $total_size);
- $ratio >= 1 and $ratio = 1;
- my $total_time = $ratio ? $dtime / $ratio : time();
-
- $progress_total->update($ratio);
- if ($dtime != $last_dtime && $current_total_size > 80_000_000) {
- $msg_time_total->set(formatTime(10 * round($total_time / 10) + 10));
-#- $msg_time_total->set(formatTimeRaw($total_time) . " " . formatTimeRaw($dtime / $ratio2));
- $msg_time_remaining->set(formatTime(10 * round(max($total_time - $dtime, 0) / 10) + 10));
- $last_dtime = $dtime;
- }
- $w->flush;
- } else { unshift @_, $m; goto $oldInstallCallback }
- };
- #- the modification is not local as the box should be living for other package installation.
- undef *install_any::changeMedium;
- *install_any::changeMedium = sub {
- my ($method, $medium) = @_;
-
- #- if not using a cdrom medium, always abort.
- if ($method eq 'cdrom' && !$::oem) {
- local $my_gtk::grab = 1;
- my $name = pkgs::mediumDescr($o->{packages}, $medium);
- local $| = 1; print "\a";
- my $time = time();
- my $r = $name !~ /commercial/i || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($install_steps_interactive::com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept");
- $r &&= $o->ask_okcancel('', _("Change your Cd-Rom!
-
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
- #- add the elapsed time (otherwise the predicted time will be rubbish)
- $start_time += time() - $time;
- return $r;
- }
- };
- my $install_result;
- catch_cdie { $install_result = $o->install_steps::installPackages($packages); }
- sub {
- if ($@ =~ /^error ordering package list: (.*)/) {
- $o->ask_yesorno('', [
-_("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1;
- ${$_[0]} = "already displayed";
- } elsif ($@ =~ /^error installing package list: (.*)/) {
- $o->ask_yesorno('', [
-_("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1;
- ${$_[0]} = "already displayed";
- }
- 0;
- };
- if ($pkgs::cancel_install) {
- $pkgs::cancel_install = 0;
- die 'already displayed';
- }
- $w->destroy;
- $install_result;
-}
-
-sub set_help {
- my ($o, @l) = @_;
-
- my @l2 = map {
- join("\n\n", map { s/\n/ /mg; $_ } split("\n\n", translate($help::steps{$_})))
- } @l;
- $o->{current_help} = join("\n\n\n", @l2);
- gtktext_insert($o->{help_window_text}, $o->{current_help});
- 1;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
deleted file mode 100644
index e268f37f7..000000000
--- a/perl-install/install_steps_interactive.pm
+++ /dev/null
@@ -1,1359 +0,0 @@
-package install_steps_interactive; # $Id$
-
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $new_bootstrap $com_license);
-
-@ISA = qw(install_steps);
-
-$com_license = _("
-Warning
-
-Please read carefully the terms below. If you disagree with any
-portion, you are not allowed to install the next CD media. Press 'Refuse'
-to continue the installation without using these media.
-
-
-Some components contained in the next CD media are not governed
-by the GPL License or similar agreements. Each such component is then
-governed by the terms and conditions of its own specific license.
-Please read carefully and comply with such specific licenses before
-you use or redistribute the said components.
-Such licenses will in general prevent the transfer, duplication
-(except for backup purposes), redistribution, reverse engineering,
-de-assembly, de-compilation or modification of the component.
-Any breach of agreement will immediately terminate your rights under
-the specific license. Unless the specific license terms grant you such
-rights, you usually cannot install the programs on more than one
-system, or adapt it to be used on a network. In doubt, please contact
-directly the distributor or editor of the component.
-Transfer to third parties or copying of such components including the
-documentation is usually forbidden.
-
-
-All rights to the components of the next CD media belong to their
-respective authors and are protected by intellectual property and
-copyright laws applicable to software programs.
-");
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use partition_table_raw;
-use install_steps;
-use install_interactive;
-use install_any;
-use detect_devices;
-use run_program;
-use devices;
-use fsedit;
-use loopback;
-use mouse;
-use modules;
-use lang;
-use keyboard;
-use any;
-use fs;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub errorInStep($$) {
- my ($o, $err) = @_;
- $o->ask_warn(_("Error"), [ _("An error occurred"), formatError($err) ]);
-}
-
-sub kill_action {
- my ($o) = @_;
- $o->kill;
-}
-
-sub charsetChanged {}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
- my ($o) = @_;
-
- $o->{lang} = any::selectLanguage($o, $o->{lang}, $o->{langs} ||= {})
- || return $o->ask_yesorno('', _("Do you really want to leave the installation?")) ? $o->exit : &selectLanguage;
- install_steps::selectLanguage($o);
-
- $o->charsetChanged;
-
- if ($o->isa('interactive_gtk')) {
- $o->ask_warn('', formatAlaTeX(
-"If you see this message it is because you chose a language for
-which DrakX does not include a translation yet; however the fact
-that it is listed means there is some support for it anyway.
-
-That is, once GNU/Linux will be installed, you will be able to at
-least read and write in that language; and possibly more (various
-fonts, spell checkers, various programs translated etc. that
-varies from language to language).")) if $o->{lang} !~ /^en/ && !lang::load_mo();
- } else {
- #- don't use _( ) for this, as it is never translated
- $o->ask_warn('', "The characters of your language can't be displayed in console,
-so the messages will be displayed in english during installation") if $ENV{LANGUAGE} eq 'C';
- }
-}
-
-sub acceptLicence {
- my ($o) = @_;
- return if $o->{useless_thing_accepted};
-
- $o->set_help('license');
- $o->{useless_thing_accepted} = $o->ask_from_list_(_("License agreement"), formatAlaTeX(
-_("Introduction
-
-The operating system and the different components available in the Mandrake Linux distribution
-shall be called the \"Software Products\" hereafter. The Software Products include, but are not
-restricted to, the set of programs, methods, rules and documentation related to the operating
-system and the different components of the Mandrake Linux distribution.
-
-
-1. License Agreement
-
-Please read this document carefully. This document is a license agreement between you and
-MandrakeSoft S.A. which applies to the Software Products.
-By installing, duplicating or using the Software Products in any manner, you explicitly
-accept and fully agree to conform to the terms and conditions of this License.
-If you disagree with any portion of the License, you are not allowed to install, duplicate or use
-the Software Products.
-Any attempt to install, duplicate or use the Software Products in a manner which does not comply
-with the terms and conditions of this License is void and will terminate your rights under this
-License. Upon termination of the License, you must immediately destroy all copies of the
-Software Products.
-
-
-2. Limited Warranty
-
-The Software Products and attached documentation are provided \"as is\", with no warranty, to the
-extent permitted by law.
-MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
-incidental, direct or indirect damages whatsoever (including without limitation damages for loss of
-business, interruption of business, financial loss, legal fees and penalties resulting from a court
-judgment, or any other consequential loss) arising out of the use or inability to use the Software
-Products, even if MandrakeSoft S.A. has been advised of the possibility or occurance of such
-damages.
-
-LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
-
-To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be
-liable for any special, incidental, direct or indirect damages whatsoever (including without
-limitation damages for loss of business, interruption of business, financial loss, legal fees
-and penalties resulting from a court judgment, or any other consequential loss) arising out
-of the possession and use of software components or arising out of downloading software components
-from one of Mandrake Linux sites which are prohibited or restricted in some countries by local laws.
-This limited liability applies to, but is not restricted to, the strong cryptography components
-included in the Software Products.
-
-
-3. The GPL License and Related Licenses
-
-The Software Products consist of components created by different persons or entities. Most
-of these components are governed under the terms and conditions of the GNU General Public
-Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use,
-duplicate, adapt or redistribute the components which they cover. Please read carefully the terms
-and conditions of the license agreement for each component before using any component. Any question
-on a component license should be addressed to the component author and not to MandrakeSoft.
-The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written
-by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for
-further details.
-
-
-4. Intellectual Property Rights
-
-All rights to the components of the Software Products belong to their respective authors and are
-protected by intellectual property and copyright laws applicable to software programs.
-MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in
-parts, by all means and for all purposes.
-\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A.
-
-
-5. Governing Laws
-
-If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this
-portion is excluded from this contract. You remain bound by the other applicable sections of the
-agreement.
-The terms and conditions of this License are governed by the Laws of France.
-All disputes on the terms of this license will preferably be settled out of court. As a last
-resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
-For any question on this document, please contact MandrakeSoft S.A.
-")), [ __("Accept"), __("Refuse") ], "Refuse") eq "Accept" and return;
-
- $o->ask_yesorno('', _("Are you sure you refuse the licence?"), 1) and $o->exit;
-
- &acceptLicence;
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
- my ($o, $clicked) = @_;
-
- my $l = keyboard::lang2keyboards(lang::langs($o->{langs}));
-
- #- good guess, don't ask
- return install_steps::selectKeyboard($o)
- if !$::expert && !$clicked && $l->[0][1] >= 90 && listlength(lang::langs($o->{langs})) == 1;
-
- my @best = map { $_->[0] } @$l;
- push @best, 'us_intl' if !member('us_intl', @best);
-
- my $format = sub { translate(keyboard::keyboard2text($_[0])) };
- my $other;
- my $ext_keyboard = $o->{keyboard};
- $o->ask_from_(
- { title => _("Keyboard"),
- messages => _("Please choose your keyboard layout."),
- advanced_messages => _("Here is the full list of keyboards available"),
- advanced_label => _("More"),
- callbacks => { changed => sub { $other = $_[0]==1 } },
- },
- [ if_(@best > 1, { val => \$o->{keyboard}, type => 'list', format => $format, sort => 1,
- list => [ @best ] }),
- { val => \$ext_keyboard, type => 'list', format => $format,
- list => [ difference2([ keyboard::keyboards ], \@best) ], advanced => @best > 1 }
- ]);
- delete $o->{keyboard_unsafe};
-
- $o->{keyboard} = $ext_keyboard if $other;
- install_steps::selectKeyboard($o);
-}
-#------------------------------------------------------------------------------
-sub selectInstallClass1 {
- my ($o, $verif, $l, $def, $l2, $def2) = @_;
- $verif->($o->ask_from_list(_("Install Class"), _("Which installation class do you want?"), $l, $def) || die 'already displayed');
-
- $::live ? 'Update' : $o->ask_from_list_(_("Install/Update"), _("Is this an install or an update?"), $l2, $def2);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
- my ($o, $clicked) = @_;
-
- my %c = my @c = (
- if_(!$::corporate,
- _("Recommended") => "beginner",
- ),
- if_($o->{meta_class} ne 'desktop',
- _("Expert") => "expert",
- ),
- );
- %c = @c = (_("Expert") => "expert") if $::expert && !$clicked;
-
- $o->set_help('selectInstallClassCorpo') if $::corporate;
-
- my $verifInstallClass = sub { $::expert = $c{$_[0]} eq "expert" };
- my $installMode = $o->{isUpgrade} ? $o->{keepConfiguration} ? __("Upgrade packages only") : __("Upgrade") : __("Install");
-
- $installMode = $o->selectInstallClass1($verifInstallClass,
- first(list2kv(@c)), ${{reverse %c}}{$::expert ? "expert" : "beginner"},
- [ __("Install"), __("Upgrade"), __("Upgrade packages only") ], $installMode);
-
- $o->{isUpgrade} = $installMode =~ /Upgrade/;
- $o->{keepConfiguration} = $installMode =~ /packages only/;
-
- install_steps::selectInstallClass($o);
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
- my ($o, $force) = @_;
-
- $force ||= $o->{mouse}{unsafe} || $::expert;
-
- my $prev = $o->{mouse}{type} . '|' . $o->{mouse}{name};
- $o->{mouse} = mouse::fullname2mouse(
- $o->ask_from_treelist_('', _("Please choose the type of your mouse."),
- '|', [ mouse::fullnames ], $prev) || return) if $force;
-
- if ($force && $o->{mouse}{type} eq 'serial') {
- $o->set_help('selectSerialPort');
- $o->{mouse}{device} =
- $o->ask_from_listf(_("Mouse Port"),
- _("Please choose on which serial port your mouse is connected to."),
- \&mouse::serial_port2text,
- [ mouse::serial_ports ]) or return;
- }
- if (arch() =~ /ppc/ && $o->{mouse}{nbuttons} == 1) {
- #- set a sane default F11/F12
- $o->{mouse}{button2_key} = 87;
- $o->{mouse}{button3_key} = 88;
- $o->ask_from('', _("Buttons emulation"),
- [
- { label => _("Button 2 Emulation"), val => \$o->{mouse}{button2_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
- { label => _("Button 3 Emulation"), val => \$o->{mouse}{button3_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
- ]) or return;
- }
-
- if ($o->{mouse}{device} eq "usbmouse") {
- any::load_category($o, 'bus/usb', !$::expert, 1, $o->{pcmcia});
- eval {
- devices::make("usbmouse");
- modules::load(qw(hid mousedev usbmouse));
- };
- }
-
- $o->SUPER::selectMouse;
- 1;
-}
-#------------------------------------------------------------------------------
-sub setupSCSI {
- my ($o, $clicked) = @_;
-
- if (!$::noauto && arch() =~ /i.86/) {
- if ($o->{pcmcia} ||= !$::testing && c::pcmcia_probe()) {
- my $w = $o->wait_message(_("PCMCIA"), _("Configuring PCMCIA cards..."));
- my $results = modules::configure_pcmcia($o->{pcmcia});
- $w = undef;
- $results and $o->ask_warn('', $results);
- }
- }
- {
- my $w = $o->wait_message(_("IDE"), _("Configuring IDE"));
- modules::load_category('disk/cdrom');
- }
- any::load_category($o, 'disk/scsi|hardware_raid', !$::expert && !$clicked, 0, $o->{pcmcia});
-
- install_interactive::tellAboutProprietaryModules($o) if !$clicked;
-}
-
-sub ask_mntpoint_s {
- my ($o, $fstab) = @_;
- $o->set_help('ask_mntpoint_s');
-
- my @fstab = grep { isTrueFS($_) } @$fstab;
- @fstab = grep { isSwap($_) } @$fstab if @fstab == 0;
- @fstab = @$fstab if @fstab == 0;
- die _("No partition available") if @fstab == 0;
-
- {
- my $w = $o->wait_message('', _("Scanning partitions to find mount points"));
- install_any::suggest_mount_points($fstab, $o->{prefix}, 'uniq');
- log::l("default mntpoint $_->{mntpoint} $_->{device}") foreach @fstab;
- }
- if (@fstab == 1) {
- $fstab[0]{mntpoint} = '/';
- } else {
- $o->ask_from('',
- _("Choose the mount points"),
- [ map { { label => partition_table::description($_),
- val => \$_->{mntpoint},
- not_edit => 0,
- list => [ '', fsedit::suggestions_mntpoint(fsedit::empty_all_hds()) ] }
- } grep { !$_->{real_mntpoint} || common::usingRamdisk() } @fstab ]) or return;
- }
- $o->SUPER::ask_mntpoint_s($fstab);
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
- my ($o) = @_;
-
- my $warned;
- install_any::getHds($o, sub {
- my ($err) = @_;
- $warned = 1;
- if ($o->ask_yesorno(_("Error"),
-_("I can't read your partition table, it's too corrupted for me :(
-I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
-The other solution is to not allow DrakX to modify the partition table.
-(the error is %s)
-
-Do you agree to loose all the partitions?
-", $err))) {
- 0;
- } else {
- $o->{partitioning}{readonly} = 1;
- 1;
- }
- }) or $warned or $o->ask_warn('',
-_("DiskDrake failed to read correctly the partition table.
-Continue at your own risk!"));
-
- if (arch() =~ /ppc/ && detect_devices::get_mac_generation =~ /NewWorld/) { #- need to make bootstrap part if NewWorld machine - thx Pixel ;^)
- if (defined $partition_table_mac::bootstrap_part) {
- #- don't do anything if we've got the bootstrap setup
- #- otherwise, go ahead and create one somewhere in the drive free space
- } else {
- if (defined $partition_table_mac::freepart_start && $partition_table_mac::freepart_size >= 1) {
- my ($hd) = $partition_table_mac::freepart_device;
- log::l("creating bootstrap partition on drive /dev/$hd->{device}, block $partition_table_mac::freepart_start");
- $partition_table_mac::bootstrap_part = $partition_table_mac::freepart_part;
- log::l("bootstrap now at $partition_table_mac::bootstrap_part");
- fsedit::add($hd, { start => $partition_table_mac::freepart_start, size => 1 << 11, type => 0x401, mntpoint => '' }, $o->{all_hds}, { force => 1, primaryOrExtended => 'Primary' });
- $new_bootstrap = 1;
- } else {
- $o->ask_warn('',_("No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"));
- }
- }
- }
-
- if ($o->{isUpgrade}) {
- # either one root is defined (and all is ok), or we take the first one we find
- my $p = fsedit::get_root_($o->{fstab});
- if (!$p) {
- my @l = install_any::find_root_parts($o->{fstab}, $o->{prefix}) or die _("No root partition found to perform an upgrade");
- $p = $o->ask_from_listf(_("Root Partition"),
- _("What is the root partition (/) of your system?"),
- \&partition_table::description, \@l) or die "setstep exitInstall\n";
- }
- install_any::use_root_part($o->{all_hds}, $p, $o->{prefix});
- } elsif ($::expert && $o->isa('interactive_gtk')) {
- install_interactive::partition_with_diskdrake($o, $o->{all_hds});
- } else {
- install_interactive::partitionWizard($o);
- }
-}
-
-#------------------------------------------------------------------------------
-sub rebootNeeded {
- my ($o) = @_;
- $o->ask_warn('', _("You need to reboot for the partition table modifications to take place"));
-
- install_steps::rebootNeeded($o);
-}
-
-#------------------------------------------------------------------------------
-sub choosePartitionsToFormat {
- my ($o, $fstab) = @_;
-
- $o->SUPER::choosePartitionsToFormat($fstab);
-
- my @l = grep { !$_->{isMounted} && $_->{mntpoint} &&
- (!isSwap($_) || $::expert) &&
- (!isFat($_) || $_->{notFormatted} || $::expert) &&
- (!isOtherAvailableFS($_) || $::expert || $_->{toFormat})
- } @$fstab;
- $_->{toFormat} = 1 foreach grep { isSwap($_) && !$::expert } @$fstab;
-
- return if @l == 0 || !$::expert && 0 == grep { ! $_->{toFormat} } @l;
-
- #- keep it temporary until the guy has accepted
- $_->{toFormatTmp} = $_->{toFormat} || $_->{toFormatUnsure} foreach @l;
-
- $o->ask_from_(
- { messages => _("Choose the partitions you want to format"),
- advanced_messages => _("Check bad blocks?"),
- },
- [ map {
- my $e = $_;
- ({
- text => partition_table::description($e), type => 'bool',
- val => \$e->{toFormatTmp}
- }, if_(!isLoopback($_) && !isThisFs("reiserfs", $_) && !isThisFs("xfs", $_) && !isThisFs("jfs", $_), {
- text => partition_table::description($e), type => 'bool', advanced => 1,
- disabled => sub { !$e->{toFormatTmp} },
- val => \$e->{toFormatCheck}
- })) } @l ]
- ) or die 'already displayed';
- #- ok now we can really set toFormat
- foreach (@l) {
- $_->{toFormat} = delete $_->{toFormatTmp};
- $_->{isFormatted} = 0;
- }
-}
-
-
-sub formatMountPartitions {
- my ($o, $fstab) = @_;
- my $w;
- fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix}, sub {
- my ($part) = @_;
- $w ||= $o->wait_message('', _("Formatting partitions"));
- $w->set(isLoopback($part) ?
- _("Creating and formatting file %s", $part->{loopback_file}) :
- _("Formatting partition %s", $part->{device}));
- });
- die _("Not enough swap space to fulfill installation, please add some") if availableMemory < 40 * 1024;
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
- my ($o) = @_;
- my $w = $o->wait_message('', _("Looking for available packages..."));
- $o->SUPER::setPackages;
-}
-#------------------------------------------------------------------------------
-sub selectPackagesToUpgrade {
- my ($o) = @_;
- my $w = $o->wait_message('', _("Finding packages to upgrade..."));
- $o->SUPER::selectPackagesToUpgrade();
-}
-#------------------------------------------------------------------------------
-sub choosePackages {
- my ($o, $packages, $compssUsers, $first_time) = @_;
-
- #- this is done at the very beginning to take into account
- #- selection of CD by user if using a cdrom.
- $o->chooseCD($packages) if $o->{method} eq 'cdrom' && !$::oem;
-
- my $availableC = install_steps::choosePackages(@_);
- my $individual = $::expert;
-
- require pkgs;
-
- my $min_size = pkgs::selectedSize($packages);
- $min_size < $availableC or die _("Your system does not have enough space left for installation or upgrade (%d > %d)", $min_size, $availableC);
-
- my $min_mark = $::expert ? 3 : 4;
- my $def_mark = 4; #-TODO: was 59, 59 is for packages that need gl hw acceleration.
-
- my $b = pkgs::saveSelected($packages);
- pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $def_mark, 0);
- my $def_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
- my $level = pkgs::setSelectedFromCompssList($packages, { map { $_ => 1 } map { @{$compssUsers->{$_}{flags}} } @{$o->{compssUsersSorted}} }, $min_mark, 0);
- my $max_size = pkgs::selectedSize($packages) + 1; #- avoid division by zero.
- pkgs::restoreSelected($b);
-
- $o->chooseGroups($packages, $compssUsers, $min_mark, \$individual, $max_size) if !$::corporate;
-
- ($o->{packages_}{ind}) =
- pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $min_mark, $availableC);
-
- $o->choosePackagesTree($packages) if $individual;
-
- install_any::warnAboutNaughtyServers($o);
-}
-
-sub chooseSizeToInstall {
- my ($o, $packages, $min, $def, $max, $availableC) = @_;
- min($def, $availableC * 0.7);
-}
-sub choosePackagesTree {
- my ($o, $packages, $limit_to_medium) = @_;
-
- $o->ask_many_from_list('', _("Choose the packages you want to install"),
- {
- list => [ grep { !$limit_to_medium || pkgs::packageMedium($packages, $_) == $limit_to_medium }
- @{$packages->{depslist}} ],
- value => \&URPM::Package::flag_selected,
- label => \&URPM::Package::name,
- sort => 1,
- });
-}
-sub loadSavePackagesOnFloppy {
- my ($o, $packages) = @_;
- my $choice = $o->ask_from_listf('',
-_("Please choose load or save package selection on floppy.
-The format is the same as auto_install generated floppies."),
- sub { $_[0]{text} },
- [ { text => _("Load from floppy"), code => sub {
- while (1) {
- my $w = $o->wait_message(_("Package selection"), _("Loading from floppy"));
- log::l("load package selection from floppy");
- my $O = eval { install_any::loadO({}, 'floppy') };
- if ($@) {
- $w = undef; #- close wait message.
- $o->ask_okcancel('', _("Insert a floppy containing package selection"))
- or return;
- } else {
- install_any::unselectMostPackages($o);
- foreach (@{$O->{default_packages} || []}) {
- my $pkg = pkgs::packageByName($packages, $_);
- pkgs::selectPackage($packages, $pkg) if $pkg;
- }
- return 1;
- }
- }
- } },
- { text => _("Save on floppy"), code => sub {
- log::l("save package selection to floppy");
- install_any::g_default_packages($o, 'quiet');
- } },
- { text => _("Cancel") },
- ]);
- $choice->{code} and $choice->{code}();
-}
-sub chooseGroups {
- my ($o, $packages, $compssUsers, $min_level, $individual, $max_size) = @_;
-
- my $b = pkgs::saveSelected($packages);
- install_any::unselectMostPackages($o);
- pkgs::setSelectedFromCompssList($packages, {}, $min_level, $max_size);
- my $system_size = pkgs::selectedSize($packages);
- my ($sizes, $pkgs) = pkgs::computeGroupSize($packages, $min_level);
- pkgs::restoreSelected($b);
- log::l("system_size: $system_size");
-
- my @groups = @{$o->{compssUsersSorted}};
- my %stable_flags = grep_each { $::b } %{$o->{compssUsersChoice}};
- delete $stable_flags{$_} foreach map { @{$compssUsers->{$_}{flags}} } @groups;
-
- my $compute_size = sub {
- my %pkgs;
- my %flags = %stable_flags; @flags{@_} = ();
- my $total_size;
- A: while (my ($k, $size) = each %$sizes) {
- Or: foreach (split "\t", $k) {
- foreach (split "&&") {
- exists $flags{$_} or next Or;
- }
- $total_size += $size;
- $pkgs{$_} = 1 foreach @{$pkgs->{$k}};
- next A;
- }
- }
- log::l("computed size $total_size");
- log::l("chooseGroups: ", join(" ", sort keys %pkgs));
-
- int $total_size;
- };
- my %val = map {
- $_ => ! grep { ! $o->{compssUsersChoice}{$_} } @{$compssUsers->{$_}{flags}}
- } @groups;
-
-# @groups = grep { $size{$_} = round_down($size{$_} / sqr(1024), 10) } @groups; #- don't display the empty or small one (eg: because all packages are below $min_level)
- my ($all, $size);
- my $available_size = install_any::getAvailableSpace($o) / sqr(1024);
- my $size_to_display = sub {
- my $lsize = $system_size + $compute_size->(map { @{$compssUsers->{$_}{flags}} } grep { $val{$_} } @groups);
-
- #- if a profile is deselected, deselect everything (easier than deselecting the profile packages)
- $size > $lsize and install_any::unselectMostPackages($o);
- $size = $lsize;
- _("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available_size);
- };
-
- while (1) {
- if ($available_size < 140) {
- # too small to choose anything. Defaulting to no group chosen
- $val{$_} = 0 foreach %val;
- last;
- }
-
- $o->reallyChooseGroups($size_to_display, $individual, \%val) or return;
- last if pkgs::correctSize($size / sqr(1024)) < $available_size;
-
- $o->ask_warn('', _("Selected size is larger than available space"));
- }
-
- $o->{compssUsersChoice}{$_} = 0 foreach map { @{$compssUsers->{$_}{flags}} } grep { !$val{$_} } keys %val;
- $o->{compssUsersChoice}{$_} = 1 foreach map { @{$compssUsers->{$_}{flags}} } grep { $val{$_} } keys %val;
-
- log::l("compssUsersChoice: " . (!$val{$_} && "not ") . "selected [$_] as [$o->{compssUsers}{$_}{label}]") foreach keys %val;
-
- #- if no group have been chosen, ask for using base system only, or no X, or normal.
- unless ($o->{isUpgrade} || grep { $val{$_} } keys %val) {
- my $docs = !$o->{excludedocs};
- my $minimal = !grep { $_ } values %{$o->{compssUsersChoice}};
-
- $o->ask_from(_("Type of install"),
- _("You haven't selected any group of packages.
-Please choose the minimal installation you want:"),
- [
- { val => \$o->{compssUsersChoice}{X}, type => 'bool', text => _("With X"), disabled => sub { $minimal } },
- if_($::expert || $minimal,
- { val => \$docs, type => 'bool', text => _("With basic documentation (recommended!)"), disabled => sub { $minimal } },
- { val => \$minimal, type => 'bool', text => _("Truly minimal install (especially no urpmi)") },
- ),
- ],
- changed => sub { $o->{compssUsersChoice}{X} = $docs = 0 if $minimal },
- ) or return &chooseGroups;
-
- $o->{excludedocs} = !$docs || $minimal;
-
- #- reselect according to user selection.
- if ($minimal) {
- $o->{compssUsersChoice}{$_} = 0 foreach keys %{$o->{compssUsersChoice}};
- } else {
- my $X = $o->{compssUsersChoice}{X}; #- don't let setDefaultPackages modify this one
- install_any::setDefaultPackages($o, 'clean');
- $o->{compssUsersChoice}{X} = $X;
- }
- install_any::unselectMostPackages($o);
- }
- 1;
-}
-
-sub reallyChooseGroups {
- my ($o, $size_to_display, $individual, $val) = @_;
-
- my $size_text = &$size_to_display;
-
- my ($path, $all);
- $o->ask_from('', _("Package Group Selection"), [
- { val => \$size_text, type => 'label' }, {},
- (map {;
- my $old = $path;
- $path = $o->{compssUsers}{$_}{path};
- if_($old ne $path, { val => translate($path) }),
- {
- val => \$val->{$_},
- type => 'bool',
- disabled => sub { $all },
- text => translate($o->{compssUsers}{$_}{label}),
- help => translate($o->{compssUsers}{$_}{descr}),
- }
- } @{$o->{compssUsersSorted}}),
- if_($o->{meta_class} eq 'desktop', { text => _("All"), val => \$all, type => 'bool' }),
- if_($individual, { text => _("Individual package selection"), val => $individual, advanced => 1, type => 'bool' }),
- ], changed => sub { $size_text = &$size_to_display }) or return;
-
- if ($all) {
- $val->{$_} = 1 foreach keys %$val;
- }
- 1;
-}
-
-sub chooseCD {
- my ($o, $packages) = @_;
- my @mediums = grep { $_ != $install_any::boot_medium } pkgs::allMediums($packages);
- my @mediumsDescr = ();
- my %mediumsDescr = ();
-
- if (!common::usingRamdisk()) {
- #- mono-cd in case of no ramdisk
- foreach (@mediums) {
- pkgs::mediumDescr($packages, $install_any::boot_medium) eq pkgs::mediumDescr($packages, $_) and next;
- undef $packages->{mediums}{$_}{selected};
- }
- log::l("low memory install, using single CD installation (as it is not ejectable)");
- return;
- }
-
- #- the boot medium is already selected.
- $mediumsDescr{pkgs::mediumDescr($packages, $install_any::boot_medium)} = 1;
-
- #- build mediumDescr according to mediums, this avoid asking multiple times
- #- all the medium grouped together on only one CD.
- foreach (@mediums) {
- my $descr = pkgs::mediumDescr($packages, $_);
- exists $mediumsDescr{$descr} or push @mediumsDescr, $descr;
- $mediumsDescr{$descr} ||= $packages->{mediums}{$_}{selected};
- }
-
- #- if no other medium available or a poor beginner, we are choosing for him!
- #- note first CD is always selected and should not be unselected!
- return if @mediumsDescr == () || !$::expert;
-
- $o->set_help('chooseCD');
- $o->ask_many_from_list('',
-_("If you have all the CDs in the list below, click Ok.
-If you have none of those CDs, click Cancel.
-If only some CDs are missing, unselect them, then click Ok."),
- {
- list => \@mediumsDescr,
- label => sub { _("Cd-Rom labeled \"%s\"", $_[0]) },
- val => sub { \$mediumsDescr{$_[0]} },
- }) or do {
- $mediumsDescr{$_} = 0 foreach @mediumsDescr; #- force unselection of other CDs.
- };
- $o->set_help('choosePackages');
-
- #- restore true selection of medium (which may have been grouped together)
- foreach (@mediums) {
- my $descr = pkgs::mediumDescr($packages, $_);
- $packages->{mediums}{$_}{selected} = $mediumsDescr{$descr};
- log::l("select status of medium $_ is $packages->{mediums}{$_}{selected}");
- }
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
- my ($o, $packages) = @_;
- my ($current, $total) = 0;
-
- my $w = $o->wait_message(_("Installing"), _("Preparing installation"));
-
- my $old = \&pkgs::installCallback;
- local *pkgs::installCallback = sub {
- my ($data, $type, $id, $subtype, $_amount, $_total) = @_;
- if ($type eq 'user' && $subtype eq 'install') {
- $total = $_amount;
- } elsif ($type eq 'inst' && $subtype eq 'start') {
- my $p = $data->{depslist}[$id];
- $w->set(_("Installing package %s\n%d%%", $p->name, $total && 100 * $current / $total));
- $current += $p->size;
- } else { unshift @_, $m; goto $old }
- };
-
- #- the modification is not local as the box should be living for other package installation.
- #- BEWARE this is somewhat duplicated (but not exactly from gtk code).
- undef *install_any::changeMedium;
- *install_any::changeMedium = sub {
- my ($method, $medium) = @_;
-
- #- if not using a cdrom medium, always abort.
- $method eq 'cdrom' && !$::oem and do {
- my $name = pkgs::mediumDescr($o->{packages}, $medium);
- local $| = 1; print "\a";
- my $r = $name !~ /commercial/i || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX($com_license), [ __("Accept"), __("Refuse") ], "Accept") eq "Accept");
- $r &&= $o->ask_okcancel('', _("Change your Cd-Rom!
-
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you don't have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
- return $r;
- };
- };
- my $install_result;
- catch_cdie { $install_result = $o->install_steps::installPackages($packages); }
- sub {
- if ($@ =~ /^error ordering package list: (.*)/) {
- $o->ask_yesorno('', [
-_("There was an error ordering packages:"), $1, _("Go on anyway?") ], 1) and return 1;
- ${$_[0]} = "already displayed";
- } elsif ($@ =~ /^error installing package list: (.*)/) {
- $o->ask_yesorno('', [
-_("There was an error installing packages:"), $1, _("Go on anyway?") ], 1) and return 1;
- ${$_[0]} = "already displayed";
- }
- 0;
- };
- if ($pkgs::cancel_install) {
- $pkgs::cancel_install = 0;
- die "setstep choosePackages\n";
- }
- $install_result;
-}
-
-sub afterInstallPackages($) {
- my ($o) = @_;
- my $w = $o->wait_message('', _("Post-install configuration"));
- $o->SUPER::afterInstallPackages($o);
-}
-
-sub copyKernelFromFloppy {
- my ($o) = @_;
- $o->ask_okcancel('', _("Please insert the Boot floppy used in drive %s", $o->{blank}), 1) or return;
- $o->SUPER::copyKernelFromFloppy();
-}
-
-sub updateModulesFromFloppy {
- my ($o) = @_;
- $o->ask_okcancel('', _("Please insert the Update Modules floppy in drive %s", $o->{updatemodules}), 1) or return;
- $o->SUPER::updateModulesFromFloppy();
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
- my ($o, $first_time, $noauto) = @_;
- require network::netconnect;
- network::netconnect::main($o->{prefix}, $o->{netcnx} ||= {}, $o->{netc}, $o->{mouse}, $o, $o->{intf},
- $first_time, $o->{lang} eq "fr_FR" && $o->{keyboard} eq "fr", $noauto);
-}
-
-#-configureNetworkIntf moved to network
-
-#-configureNetworkNet moved to network
-#------------------------------------------------------------------------------
-#-pppConfig moved to any.pm
-#------------------------------------------------------------------------------
-sub installCrypto {
- my $license =
-_("You now have the opportunity to download encryption software.
-
-WARNING:
-
-Due to different general requirements applicable to these software and imposed
-by various jurisdictions, customer and/or end user of theses software should
-ensure that the laws of his/their jurisdiction allow him/them to download, stock
-and/or use these software.
-
-In addition customer and/or end user shall particularly be aware to not infringe
-the laws of his/their jurisdiction. Should customer and/or end user not
-respect the provision of these applicable laws, he/they will incure serious
-sanctions.
-
-In no event shall Mandrakesoft nor its manufacturers and/or suppliers be liable
-for special, indirect or incidental damages whatsoever (including, but not
-limited to loss of profits, business interruption, loss of commercial data and
-other pecuniary losses, and eventual liabilities and indemnification to be paid
-pursuant to a court decision) arising out of use, possession, or the sole
-downloading of these software, to which customer and/or end user could
-eventually have access after having sign up the present agreement.
-
-
-For any queries relating to these agreement, please contact
-Mandrakesoft, Inc.
-2400 N. Lincoln Avenue Suite 243
-Altadena California 91001
-USA");
- goto &installUpdates; #- remove old code, keep this one ok though by transfering to installUpdates.
-}
-
-sub installUpdates {
- my ($o) = @_;
- my $u = $o->{updates} ||= {};
-
- $o->hasNetwork or return;
-
- is_empty_hash_ref($u) and $o->ask_yesorno('',
-formatAlaTeX(
-_("You now have the opportunity to download updated packages. These packages
-have been released after the distribution was released. They may
-contain security or bug fixes.
-
-To download these packages, you will need to have a working Internet
-connection.
-
-Do you want to install the updates ?"))) || return;
-
- #- bring all interface up for installing crypto packages.
- install_interactive::upNetwork($o);
-
- require crypto;
- eval {
- my @mirrors = do { my $w = $o->wait_message('',
- _("Contacting Mandrake Linux web site to get the list of available mirrors..."));
- crypto::mirrors() };
- #- if no mirror have been found, use current time zone and propose among available.
- $u->{mirror} ||= crypto::bestMirror($o->{timezone}{timezone});
- $u->{mirror} = $o->ask_from_treelistf('',
- _("Choose a mirror from which to get the packages"),
- '|',
- \&crypto::mirror2text,
- \@mirrors,
- $u->{mirror});
- };
- return if $@ || !$u->{mirror};
-
- my $update_medium = do {
- my $w = $o->wait_message('', _("Contacting the mirror to get the list of available packages..."));
- crypto::getPackages($o->{prefix}, $o->{packages}, $u->{mirror});
- };
-
- if ($update_medium) {
- if ($o->choosePackagesTree($o->{packages}, $update_medium)) {
- $o->pkg_install;
- } else {
- #- make sure to not try to install the packages (which are automatically selected by getPackage above).
- #- this is possible by deselecting the medium (which can be re-selected above).
- delete $update_medium->{selected};
- }
- #- update urpmi even, because there is an hdlist available and everything is good,
- #- this will allow user to update the medium but update his machine later.
- $o->install_urpmi;
- }
-
- #- stop interface using ppp only. FIXME REALLY TOCHECK isdn (costly network) ?
- # FIXME damien install_interactive::downNetwork($o, 'pppOnly');
-}
-
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
- my ($o, $clicked) = @_;
-
- require timezone;
- $o->{timezone}{timezone} = $o->ask_from_treelist('', _("Which is your timezone?"), '/', [ timezone::getTimeZones($::g_auto_install ? '' : $o->{prefix}) ], $o->{timezone}{timezone}) || return;
- $o->set_help('configureTimezoneGMT');
-
- my $ntp = to_bool($o->{timezone}{ntp});
- $o->ask_from('', '', [
- { text => _("Hardware clock set to GMT"), val => \$o->{timezone}{UTC}, type => 'bool' },
- { text => _("Automatic time synchronization (using NTP)"), val => \$ntp, type => 'bool' },
- ]) or goto &configureTimezone
- if $::expert || $clicked;
- if ($ntp) {
- my @servers = split("\n", $timezone::ntp_servers);
-
- $o->ask_from('', '',
- [ { label => _("NTP Server"), val => \$o->{timezone}{ntp}, list => \@servers, not_edit => 0 } ]
- ) or goto &configureTimezone;
- $o->{timezone}{ntp} =~ s/.*\((.+)\)/$1/;
- } else {
- $o->{timezone}{ntp} = '';
- }
- install_steps::configureTimezone($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureServices {
- my ($o, $clicked) = @_;
- require services;
- $o->{services} = services::ask($o, $o->{prefix}) if $::expert || $clicked;
- install_steps::configureServices($o);
-}
-
-sub summary {
- my ($o, $first_time) = @_;
- require pkgs;
-
- if ($first_time) {
- #- auto-detection
- $o->configurePrinter(0) if !$::expert;
- install_any::preConfigureTimezone($o);
- }
- my $mouse_name;
- my $format_mouse = sub { $mouse_name = translate($o->{mouse}{type}) . ' ' . translate($o->{mouse}{name}) };
- &$format_mouse;
-
- #- format printer description in a better way
- my $format_printers = sub {
- my $printer = $o->{printer};
- if (is_empty_hash_ref($printer->{configured})) {
- pkgs::packageByName($o->{packages}, 'cups')->flag_installed and return _("Remote CUPS server");
- return _("No printer");
- }
- my $entry;
- foreach ($printer->{currentqueue},
- map { $_->{queuedata} } ($printer->{configured}{$printer->{DEFAULT}}, values %{$printer->{configured}})) {
- $_ && ($_->{make} || $_->{model}) and return "$_->{make} $_->{model}";
- }
- return _("Remote CUPS server"); #- fall back in case of something wrong.
- };
-
- my @sound_cards = (arch() =~ /ppc/ ? \&modules::load_category : \&modules::probe_category)->('multimedia/sound');
-
- #- if no sound card are detected AND the user selected things needing a sound card,
- #- propose a special case for ISA cards
- my $isa_sound_card =
- !@sound_cards && ($o->{compssUsersChoice}{GAMES} || $o->{compssUsersChoice}{AUDIO}) &&
- sub {
- if ($o->ask_yesorno('', _("Do you have an ISA sound card?"))) {
- $o->do_pkgs->install('sndconfig');
- $o->ask_warn('', _("Run \"sndconfig\" after installation to configure your sound card"));
- } else {
- $o->ask_warn('', _("No sound card detected. Try \"harddrake\" after installation"));
- }
- };
-
- $o->ask_from_({
- messages => _("Summary"),
- cancel => '',
- }, [
-{ label => _("Mouse"), val => \$mouse_name, clicked => sub { $o->selectMouse(1); mouse::write($o->{prefix}, $o->{mouse}); &$format_mouse } },
-{ label => _("Keyboard"), val => \$o->{keyboard}, clicked => sub { $o->selectKeyboard(1) }, format => sub { translate(keyboard::keyboard2text($_[0])) } },
-{ label => _("Timezone"), val => \$o->{timezone}{timezone}, clicked => sub { $o->configureTimezone(1) } },
-{ label => _("Printer"), val => \$o->{printer}, clicked => sub { $o->configurePrinter(1) }, format => $format_printers },
- (map {
-{ label => _("ISDN card"), val => $_->{description}, clicked => sub { $o->configureNetwork } }
- } grep { $_->{driver} eq 'hisax' } detect_devices::probeall()),
- (map {
-{ label => _("Sound card"), val => $_->{description} }
- } @sound_cards),
- if_($isa_sound_card, { label => _("Sound card"), clicked => $isa_sound_card }),
- (map {
-{ label => _("TV card"), val => $_->{description}, clicked => sub {
- require harddrake::bttv;
- harddrake::bttv::config($o);
-} } } grep { $_->{driver} eq 'bttv' } detect_devices::probeall()),
-]);
- install_steps::configureTimezone($o); #- do not forget it.
-}
-
-#------------------------------------------------------------------------------
-sub configurePrinter {
- my ($o, $clicked) = @_;
- $::corporate && !$clicked and return;
-
- require printer;
- require printerdrake;
-
- #- try to determine if a question should be asked to the user or
- #- if he is autorized to configure multiple queues.
- my $ask_multiple_printer = ($::expert || $clicked) && 2 || scalar(printerdrake::auto_detect($o));
- $ask_multiple_printer-- or return;
-
- #- install packages needed for printer::getinfo()
- $::testing or $o->do_pkgs->install('foomatic');
-
- #- take default configuration, this include choosing the right system
- #- currently used by the system.
- my $printer = $o->{printer} ||= {};
- eval { add2hash($printer, printer::getinfo($o->{prefix})) };
-
- $printer->{PAPERSIZE} = (($o->{lang} =~ /^en_US/) ||
- ($o->{lang} =~ /^en_CA/) ||
- ($o->{lang} =~ /^fr_CA/)) ? 'Letter' : 'A4';
- printerdrake::main($printer, $o, $ask_multiple_printer, sub { install_interactive::upNetwork($o, 'pppAvoided') });
-
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
- my ($o, $clicked) = @_;
- my $sup = $o->{superuser} ||= {};
- my $auth = ($o->{authentication}{LDAP} && __("LDAP") ||
- $o->{authentication}{NIS} && __("NIS") ||
- __("Local files"));
- $sup->{password2} ||= $sup->{password} ||= "";
-
- return if $o->{security} < 1 && !$clicked;
-
- $::isInstall and $o->set_help("setRootPassword", if_($::expert, "setRootPasswordAuth"));
-
- $o->ask_from_(
- {
- title => _("Set root password"),
- messages => _("Set root password"),
- cancel => ($o->{security} <= 2 && !$::corporate ? _("No password") : ''),
- callbacks => {
- complete => sub {
- $sup->{password} eq $sup->{password2} or $o->ask_warn('', [ _("The passwords do not match"), _("Please try again") ]), return (1,0);
- length $sup->{password} < 2 * $o->{security}
- and $o->ask_warn('', _("This password is too short (it must be at least %d characters long)", 2 * $o->{security})), return (1,0);
- return 0
- } } }, [
-{ label => _("Password"), val => \$sup->{password}, hidden => 1 },
-{ label => _("Password (again)"), val => \$sup->{password2}, hidden => 1 },
- if_($::expert,
-{ label => _("Authentication"), val => \$auth, list => [ __("Local files"), __("LDAP"), __("NIS") ], format => \&translate },
- ),
- ]) or return;
-
- if ($auth eq __("LDAP")) {
- $o->{authentication}{LDAP} ||= "localhost"; #- any better solution ?
- $o->{netc}{LDAPDOMAIN} ||= join (',', map { "dc=$_" } split /\./, $o->{netc}{DOMAINNAME});
- $o->ask_from('',
- _("Authentication LDAP"),
- [ { label => _("LDAP Base dn"), val => \$o->{netc}{LDAPDOMAIN} },
- { label => _("LDAP Server"), val => \$o->{authentication}{LDAP} },
- ]) or goto &setRootPassword;
- } else { $o->{authentication}{LDAP} = '' }
- if ($auth eq __("NIS")) {
- $o->{authentication}{NIS} ||= 'broadcast';
- $o->ask_from('',
- _("Authentication NIS"),
- [ { label => _("NIS Domain"), val => \ ($o->{netc}{NISDOMAIN} ||= $o->{netc}{DOMAINNAME}) },
- { label => _("NIS Server"), val => \$o->{authentication}{NIS}, list => ["broadcast"], not_edit => 0 },
- ]) or goto &setRootPassword;
- } else { $o->{authentication}{NIS} = '' }
- install_steps::setRootPassword($o);
-}
-
-#------------------------------------------------------------------------------
-#-addUser
-#------------------------------------------------------------------------------
-sub addUser {
- my ($o, $clicked) = @_;
- $o->{users} ||= [];
-
- if ($o->{security} < 1) {
- push @{$o->{users}}, { password => 'mandrake', realname => 'default', icon => 'automagic' }
- if !member('mandrake', map { $_->{name} } @{$o->{users}});
- }
- if (($o->{security} >= 1 || $clicked)) {
- any::ask_users($o->{prefix}, $o, $o->{users}, $o->{security});
- }
- any::get_autologin($o->{prefix}, $o);
- any::autologin($o->{prefix}, $o, $o);
-
- install_steps::addUser($o);
-}
-
-#------------------------------------------------------------------------------
-sub createBootdisk {
- my ($o, $first_time, $noauto) = @_;
-
- return if !$noauto && $first_time && !$::expert;
-
- if (arch() =~ /sparc/) {
- #- as probing floppies is a bit more different on sparc, assume always /dev/fd0.
- $o->ask_okcancel('',
- _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-SILO on your system, or another operating system removes SILO, or SILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures.
-
-If you want to create a bootdisk for your system, insert a floppy in the first
-drive and press \"Ok\"."),
- $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
- my @l = detect_devices::floppies_dev();
- $o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
- $o->{mkbootdisk} or return;
- } else {
- my @l = detect_devices::floppies_dev();
- my %l = (
- 'fd0' => _("First floppy drive"),
- 'fd1' => _("Second floppy drive"),
- 'Skip' => _("Skip"),
- );
-
- if ($first_time || @l == 1) {
- $o->ask_yesorno('', formatAlaTeX(
- _("A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-LILO (or grub) on your system, or another operating system removes LILO, or LILO doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures. Would you like to create a bootdisk for your system?
-%s", isThisFs('xfs', fsedit::get_root($o->{fstab})) ? _("
-
-(WARNING! You're using XFS for your root partition,
-creating a bootdisk on a 1.44 Mb floppy will probably fail,
-because XFS needs a very large driver).") : '')),
- $o->{mkbootdisk}) or return $o->{mkbootdisk} = '';
- $o->{mkbootdisk} = $l[0] if !$o->{mkbootdisk} || $o->{mkbootdisk} eq "1";
- } else {
- @l or die _("Sorry, no floppy drive available");
-
- $o->ask_from_(
- {
- messages => _("Choose the floppy drive you want to use to make the bootdisk"),
- }, [ { val => \$o->{mkbootdisk}, list => \@l, format => sub { $l{$_[0]} || $_[0] } } ]
- ) or return;
- }
- $o->ask_warn('', _("Insert a floppy in %s", $l{$o->{mkbootdisk}} || $o->{mkbootdisk}));
- }
-
- my $w = $o->wait_message('', _("Creating bootdisk..."));
- install_steps::createBootdisk($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloaderBefore {
- my ($o) = @_;
- my $w = $o->wait_message('', _("Preparing bootloader..."));
- $o->set_help('empty');
- $o->SUPER::setupBootloaderBefore($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
- my ($o, $more) = @_;
- if (arch() =~ /ppc/) {
- my $machtype = detect_devices::get_mac_generation();
- if ($machtype !~ /NewWorld/) {
- $o->ask_warn('', _("You appear to have an OldWorld or Unknown\n machine, the yaboot bootloader will not work for you.\nThe install will continue, but you'll\n need to use BootX to boot your machine"));
- log::l("OldWorld or Unknown Machine - no yaboot setup");
- return;
- }
- }
- if (arch() =~ /^alpha/) {
- $o->ask_yesorno('', _("Do you want to use aboot?"), 1) or return;
- catch_cdie { $o->SUPER::setupBootloader } sub {
- $o->ask_yesorno('',
-_("Error installing aboot,
-try to force installation even if that destroys the first partition?"));
- };
- } else {
- any::setupBootloader($o, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{security}, $o->{prefix}, $more) or return;
-
- {
- my $w = $o->wait_message('', _("Installing bootloader"));
- eval { $o->SUPER::setupBootloader };
- }
- if (my $err = $@) {
- $err =~ /failed$/ or die;
- $o->ask_warn('',
- [ _("Installation of bootloader failed. The following error occured:"),
- grep { !/^Warning:/ } cat_("$o->{prefix}/tmp/.error") ]);
- unlink "$o->{prefix}/tmp/.error";
- die "already displayed";
- } elsif (arch() =~ /ppc/) {
- my $of_boot = cat_("$o->{prefix}/tmp/of_boot_dev") || die "Can't open $o->{prefix}/tmp/of_boot_dev";
- chop($of_boot);
- unlink "$o->{prefix}/tmp/.error";
- $o->ask_warn('', _("You may need to change your Open Firmware boot-device to\n enable the bootloader. If you don't see the bootloader prompt at\n reboot, hold down Command-Option-O-F at reboot and enter:\n setenv boot-device %s,\\\\:tbxi\n Then type: shut-down\nAt your next boot you should see the bootloader prompt.", $of_boot));
- }
- }
-}
-
-sub miscellaneous {
- my ($o, $clicked) = @_;
-
- if ($::expert) {
- any::choose_security_level($o, \$o->{security}, \$o->{libsafe}) or return;
- }
- install_steps::miscellaneous($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureX {
- my ($o, $clicked) = @_;
- $o->configureXBefore;
-
- #- strange, xfs must not be started twice...
- #- trying to stop and restart it does nothing good too...
- my $xfs_started if 0;
- run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/xfs", "start") unless $::live || $xfs_started;
- $xfs_started = 1;
-
- require Xconfigurator;
- { local $::testing = 0; #- unset testing
- local $::auto = !$::expert && !$clicked;
-
- symlink "$o->{prefix}/etc/gtk", "/etc/gtk";
- Xconfigurator::main($o->{prefix}, $o->{X}, $o, $o->do_pkgs,
- { allowFB => $o->{allowFB},
- allowNVIDIA_rpms => install_any::allowNVIDIA_rpms($o->{packages}),
- });
- }
- $o->configureXAfter;
-}
-
-#------------------------------------------------------------------------------
-sub generateAutoInstFloppy {
- my ($o, $replay) = @_;
-
- my $floppy = detect_devices::floppy();
-
- $o->ask_okcancel('', _("Insert a blank floppy in drive %s", $floppy), 1) or return;
-
- my $dev = devices::make($floppy);
- {
- my $w = $o->wait_message('', _("Creating auto install floppy..."));
- install_any::getAndSaveAutoInstallFloppy($o, $replay, $dev) or return;
- }
- common::sync(); #- if you shall remove the floppy right after the LED switches off
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall {
- my ($o, $alldone) = @_;
-
- return $o->{step} = '' unless $alldone || $o->ask_yesorno('',
-_("Some steps are not completed.
-
-Do you really want to quit now?"), 0);
-
- install_steps::exitInstall($o);
-
- $o->exit unless $alldone;
-
- $o->ask_from_no_check(
- {
- messages => formatAlaTeX(
-_("Congratulations, installation is complete.
-Remove the boot media and press return to reboot.
-
-
-For information on fixes which are available for this release of Mandrake Linux,
-consult the Errata available from:
-
-
-http://www.linux-mandrake.com/en/82errata.php3
-
-
-Information on configuring your system is available in the post
-install chapter of the Official Mandrake Linux User's Guide.")),
- cancel => '',
- },
- [
- if_($::expert,
- { val => \ (my $t1 = _("Generate auto install floppy")), clicked => sub {
- my $t = $o->ask_from_list_('',
-_("The auto install can be fully automated if wanted,
-in that case it will take over the hard drive!!
-(this is meant for installing on another box).
-
-You may prefer to replay the installation.
-"), [ __("Replay"), __("Automated") ]);
- $t and $o->generateAutoInstFloppy($t eq 'Replay');
- }, advanced => 1 },
- { val => \ (my $t2 = _("Save packages selection")), clicked => sub { install_any::g_default_packages($o) }, advanced => 1 },
- ),
- ]
- ) if $alldone && !$::g_auto_install;
-}
-
-
-#-######################################################################################
-#- Misc Steps Functions
-#-######################################################################################
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/install_steps_newt.pm b/perl-install/install_steps_newt.pm
deleted file mode 100644
index 2292094b0..000000000
--- a/perl-install/install_steps_newt.pm
+++ /dev/null
@@ -1,61 +0,0 @@
-package install_steps_newt; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_newt);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use install_steps_interactive;
-use interactive_newt;
-use install_any;
-use devices;
-use lang;
-use common;
-
-my $banner = __();
-
-sub banner {
- my $banner = translate(__("Mandrake Linux Installation %s"));
- my $l = first(Newt::GetScreenSize) - length($banner) - length($_[0]) + 1;
- Newt::DrawRootText(0, 0, sprintf($banner, ' ' x $l . $_[0]));
- Newt::Refresh;
-}
-
-sub new($$) {
- my ($type, $o) = @_;
-
- interactive_newt->new;
-
- banner('');
- Newt::PushHelpLine(_(" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "));
-
- (bless {}, ref $type || $type)->SUPER::new($o);
-}
-
-sub enteringStep {
- my ($o, $step) = @_;
- $o->SUPER::enteringStep($step);
- banner(translate($o->{steps}{$step}{text}));
-}
-
-sub exitInstall {
- &install_steps_interactive::exitInstall;
- interactive_newt::end;
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
- my ($o) = @_;
- $o->SUPER::selectLanguage;
- lang::load_console_font($o->{lang});
-}
-
-
-1;
-
diff --git a/perl-install/install_steps_stdio.pm b/perl-install/install_steps_stdio.pm
deleted file mode 100644
index 518640d29..000000000
--- a/perl-install/install_steps_stdio.pm
+++ /dev/null
@@ -1,40 +0,0 @@
-package install_steps_stdio; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive_stdio);
-
-use common;
-use interactive_stdio;
-use install_steps_interactive;
-use lang;
-
-sub new($$) {
- my ($type, $o) = @_;
-
- (bless {}, ref $type || $type)->SUPER::new($o);
-}
-
-sub enteringStep {
- my ($o, $step) = @_;
- print _("Entering step `%s'\n", translate($o->{steps}{$step}{text}));
- $o->SUPER::enteringStep($step);
-}
-sub leavingStep {
- my ($o, $step) = @_;
- $o->SUPER::leavingStep($step);
- print "--------\n";
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
- my ($o, $first_time) = @_;
- $o->SUPER::selectLanguage($first_time);
- lang::load_console_font($o->{lang});
-}
-
-1;
diff --git a/perl-install/interactive.pm b/perl-install/interactive.pm
deleted file mode 100644
index b22e703a9..000000000
--- a/perl-install/interactive.pm
+++ /dev/null
@@ -1,400 +0,0 @@
-package interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::Func;
-use common;
-
-#- minimal example using interactive:
-#
-#- > use lib qw(/usr/lib/libDrakX);
-#- > use interactive;
-#- > my $in = interactive->vnew;
-#- > $in->ask_okcancel('title', 'question');
-#- > $in->exit;
-
-#- ask_from_entries takes:
-#- val => reference to the value
-#- label => description
-#- icon => icon to put before the description
-#- help => tooltip
-#- advanced => wether it is shown in by default or only in advanced mode
-#- disabled => function returning wether it should be disabled (grayed)
-#- gtk => gtk preferences
-#- type =>
-#- button => (with clicked or clicked_may_quit)
-#- (type defaults to button if clicked or clicked_may_quit is there)
-#- (val need not be a reference) (if clicked_may_quit return true, it's as if "Ok" was pressed)
-#- label => (val need not be a reference) (type defaults to label if val is not a reference)
-#- bool (with text)
-#- range (with min, max)
-#- combo (with list, not_edit, format)
-#- list (with list, icon2f (aka icon), separator (aka tree), format (aka pre_format function),
-#- help can be a hash or a function,
-#- tree_expanded boolean telling wether the tree should be wide open by default
-#- quit_if_double_click boolean
-#- allow_empty_list disables the special cases for 0 and 1 element lists)
-#- entry (the default) (with hidden)
-#
-#- heritate from this class and you'll get all made interactivity for same steps.
-#- for this you need to provide
-#- - ask_from_listW(o, title, messages, arrayref, default) returns one string of arrayref
-#-
-#- where
-#- - o is the object
-#- - title is a string
-#- - messages is an refarray of strings
-#- - default is an optional string (default is in arrayref)
-#- - arrayref is an arrayref of strings
-#- - arrayref2 contains booleans telling the default state,
-#-
-#- ask_from_list and ask_from_list_ are wrappers around ask_from_biglist and ask_from_smalllist
-#-
-#- ask_from_list_ just translate arrayref before calling ask_from_list and untranslate the result
-#-
-#- ask_from_listW should handle differently small lists and big ones.
-#-
-
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-sub new($) {
- my ($type) = @_;
-
- bless {}, ref $type || $type;
-}
-
-sub vnew {
- my ($type, $su, $icon) = @_;
- $su = $su eq "su";
- if ($ENV{INTERACTIVE_HTTP}) {
- require interactive_http;
- return interactive_http->new;
- }
- require c;
- if ($su) {
- $ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
- $su = '' if $::testing;
- }
- if ($ENV{DISPLAY} && system('/usr/X11R6/bin/xtest') == 0) {
- if ($su && $>) {
- if (`/sbin/pidof "kdeinit: kwin"` > 0) {
- exec("kdesu", "-c", "$0 @ARGV") or die _("kdesu missing");
- } else {
- exec {'consolehelper'} $0, @ARGV or die _("consolehelper missing");
- }
- }
- eval { require interactive_gtk };
- if (!$@) {
- my $o = interactive_gtk->new;
- if ($icon && $icon ne 'default' && !$::isWizard) { $o->{icon} = $icon } else { undef $o->{icon} }
- return $o;
- }
- } else {
- if ($su && $>) {
- exec {'consolehelper'} $0, @ARGV or die _("consolehelper missing");
- }
- }
-
- if ($su && $>) {
- die "you must be root to run this program";
- }
- require 'log.pm';
- undef *log::l;
- *log::l = sub {}; # otherwise, it will bother us :(
- require interactive_newt;
- interactive_newt->new;
-}
-
-sub enter_console {}
-sub leave_console {}
-sub suspend {}
-sub resume {}
-sub end {}
-sub exit { exit($_[0]) }
-
-#-######################################################################################
-#- Interactive functions
-#-######################################################################################
-sub ask_warn {
- my ($o, $title, $message) = @_;
- local $::isWizard=0;
- ask_from_listf_no_check($o, $title, $message, undef, [ _("Ok") ]);
-}
-
-sub ask_yesorno {
- my ($o, $title, $message, $def, $help) = @_;
- ask_from_list_($o, $title, $message, [ __("Yes"), __("No") ], $def ? "Yes" : "No", $help) eq "Yes";
-}
-
-sub ask_okcancel {
- my ($o, $title, $message, $def, $help) = @_;
-
- if ($::isWizard) {
- $::no_separator = 1;
- $o->ask_from_no_check({ title => $title, messages => $message, focus_cancel => !$def });
- } else {
- ask_from_list_($o, $title, $message, [ __("Ok"), __("Cancel") ], $def ? "Ok" : "Cancel", $help) eq "Ok";
- }
-}
-
-sub ask_file {
- my ($o, $title, $dir) = @_;
- $o->ask_fileW($title, $dir);
-}
-sub ask_fileW {
- my ($o, $title, $dir) = @_;
- $o->ask_from_entry($title, _("Choose a file"));
-}
-
-sub ask_from_list {
- my ($o, $title, $message, $l, $def, $help) = @_;
- ask_from_listf($o, $title, $message, undef, $l, $def, $help);
-}
-
-sub ask_from_list_ {
- my ($o, $title, $message, $l, $def, $help) = @_;
- ask_from_listf($o, $title, $message, sub { translate($_[0]) }, $l, $def, $help);
-}
-
-sub ask_from_listf_ {
- my ($o, $title, $message, $f, $l, $def, $help) = @_;
- ask_from_listf($o, $title, $message, sub { translate($f->(@_)) }, $l, $def, $help);
-}
-sub ask_from_listf {
- my ($o, $title, $message, $f, $l, $def, $help) = @_;
- @$l == 0 and die "ask_from_list: empty list\n" . common::backtrace();
- @$l == 1 and return $l->[0];
- goto &ask_from_listf_no_check;
-}
-
-sub ask_from_listf_no_check {
- my ($o, $title, $message, $f, $l, $def, $help) = @_;
-
- if (@$l <= 2 && !$::isWizard) {
- my $ret = eval {
- ask_from_no_check($o,
- { title => $title, messages => $message, ok => $l->[0] && may_apply($f, $l->[0]),
- if_($l->[1], cancel => may_apply($f, $l->[1]), focus_cancel => $def eq $l->[1]) }, []
- ) ? $l->[0] : $l->[1];
- };
- die if $@ && $@ !~ /^wizcancel/;
- $@ ? undef : $ret;
- } else {
- ask_from($o, $title, $message, [ { val => \$def, type => 'list', list => $l, help => $help, format => $f } ]) && $def;
- }
-}
-
-sub ask_from_treelist {
- my ($o, $title, $message, $separator, $l, $def) = @_;
- ask_from_treelistf($o, $title, $message, $separator, undef, $l, $def);
-}
-sub ask_from_treelist_ {
- my ($o, $title, $message, $separator, $l, $def) = @_;
- my $transl = sub { join '|', map { translate($_) } split(quotemeta($separator), $_[0]) };
- ask_from_treelistf($o, $title, $message, $separator, $transl, $l, $def);
-}
-sub ask_from_treelistf {
- my ($o, $title, $message, $separator, $f, $l, $def) = @_;
- ask_from($o, $title, $message, [ { val => \$def, separator => $separator, list => $l, format => $f, sort => 1 } ]) or return;
- $def;
-}
-
-sub ask_many_from_list {
- my ($o, $title, $message, @l) = @_;
- @l = grep { @{$_->{list}} } @l or return '';
- foreach my $h (@l) {
- $h->{e}{$_} = {
- text => may_apply($h->{label}, $_),
- val => $h->{val} ? $h->{val}->($_) : do {
- my $i =
- $h->{value} ? $h->{value}->($_) :
- $h->{values} ? member($_, @{$h->{values}}) : 0;
- \$i;
- },
- type => 'bool',
- help => may_apply($h->{help}, $_, ''),
- icon => may_apply($h->{icon2f}, $_, ''),
- } foreach @{$h->{list}};
- if ($h->{sort}) {
- $h->{list} = [ sort { $h->{e}{$a}{text} cmp $h->{e}{$b}{text} } @{$h->{list}} ];
- }
- }
- $o->ask_from($title, $message, [ map { my $h = $_; map { $h->{e}{$_} } @{$h->{list}} } @l ]) or return;
-
- @l = map {
- my $h = $_;
- [ grep { ${$h->{e}{$_}{val}} } @{$h->{list}} ];
- } @l;
- wantarray ? @l : $l[0];
-}
-
-sub ask_from_entry {
- my ($o, $title, $message, %callback) = @_;
- first(ask_from_entries($o, $title, $message, [''], %callback));
-}
-sub ask_from_entries {
- my ($o, $title, $message, $l, %callback) = @_;
-
- my @l = map { my $i = ''; { label => $_, val => \$i } } @$l;
-
- $o->ask_from($title, $message, \@l, %callback) ?
- map { ${$_->{val}} } @l :
- undef;
-}
-
-#- can get a hash of callback: focus_out changed and complete
-#- moreove if you pass a hash with a field list -> combo
-#- if you pass a hash with a field hidden -> emulate stty -echo
-sub ask_from {
- my ($o, $title, $message, $l, %callback) = @_;
- ask_from_($o, { title => $title, messages => $message, callbacks => \%callback }, $l);
-}
-
-
-sub ask_from_normalize {
- my ($o, $common, $l) = @_;
-
- foreach my $e (@$l) {
- if (my $li = $e->{list}) {
- if ($e->{sort} || @$li > 10 && !exists $e->{sort}) {
- my @l2 = map { may_apply($e->{format}, $_) } @$li;
- my @places = sort { $l2[$a] cmp $l2[$b] } 0 .. $#l2;
- $e->{list} = $li = [ map { $li->[$_] } @places ];
- }
- $e->{type} = 'iconlist' if $e->{icon2f};
- $e->{type} = 'treelist' if $e->{separator};
- add2hash_($e, { not_edit => 1 });
- $e->{type} ||= 'combo';
- ${$e->{val}} = $li->[0] if ($e->{type} ne 'combo' || $e->{not_edit}) && !member(${$e->{val}}, @$li);
- if ($e->{type} eq 'combo' && $e->{format}) {
- my @l = map { $e->{format}->($_) } @{$e->{list}};
- delete $e->{format};
- each_index {
- ${$e->{val}} = $l[$::i] if $_ eq ${$e->{val}};
- } @{$e->{list}};
- ($e->{list}, $e->{saved_list}) = (\@l, $e->{list});
- }
- } elsif ($e->{type} eq 'range') {
- $e->{min} <= $e->{max} or die "bad range min $e->{min} > max $e->{max} (called from " . join(':', caller()) . ")";
- ${$e->{val}} = max($e->{min}, min(${$e->{val}}, $e->{max}));
- } elsif ($e->{type} eq 'button' || $e->{clicked} || $e->{clicked_may_quit}) {
- $e->{type} = 'button';
- $e->{clicked_may_quit} ||= $e->{clicked} ? sub { $e->{clicked}(); 0 } : sub {};
- $e->{val} = \ (my $v = $e->{val}) if !ref($e->{val});
- } elsif ($e->{type} eq 'label' || !ref($e->{val})) {
- $e->{type} = 'label';
- $e->{val} = \ (my $v = $e->{val}) if !ref($e->{val});
- } else {
- $e->{type} ||= 'entry';
- }
- $e->{disabled} ||= sub { 0 };
- }
-
- #- don't display empty lists and one element lists
- @$l = grep {
- if ($_->{list} && $_->{not_edit} && !$_->{allow_empty_list}) {
- if (@{$_->{list}} == ()) {
- eval {
- require log;
- log::l("ask_from_normalize: empty list for $_->{label}\n" . common::backtrace());
- };
- }
- @{$_->{list}} > 1;
- } else {
- 1;
- }
- } @$l;
-
- $common->{advanced_label} ||= _("Advanced");
- $common->{advanced_label_close} ||= _("Basic");
- $common->{$_} = [ deref($common->{$_}) ] foreach qw(messages advanced_messages);
- add2hash_($common, { ok => _("Ok"), cancel => _("Cancel") }) if !exists $common->{ok} && !$::isWizard;
- add2hash_($common->{callbacks} ||= {}, { changed => sub {}, focus_out => sub {}, complete => sub { 0 }, canceled => sub { 0 } });
-}
-
-sub ask_from_ {
- my ($o, $common, $l) = @_;
- ask_from_normalize($o, $common, $l);
- @$l or return 1;
- ask_from_real($o, $common, $l);
-}
-sub ask_from_no_check {
- my ($o, $common, $l) = @_;
- ask_from_normalize($o, $common, $l);
- $o->ask_fromW($common, [ grep { !$_->{advanced} } @$l ], [ grep { $_->{advanced} } @$l ]);
-}
-sub ask_from_real {
- my ($o, $common, $l) = @_;
- my $v = $o->ask_fromW($common, [ grep { !$_->{advanced} } @$l ], [ grep { $_->{advanced} } @$l ]);
- %$common = ();
- foreach my $e (@$l) {
- my $l = delete $e->{saved_list} or next;
- each_index {
- ${$e->{val}} = $l->[$::i] if $_ eq ${$e->{val}};
- } @{$e->{list}};
- $e->{list} = $l;
- }
- $v;
-}
-
-
-sub ask_browse_tree_info {
- my ($o, $title, $message, $common) = @_;
- add2hash_($common, { ok => _("Ok"), cancel => _("Cancel") });
- add2hash_($common, { title => $title, message => $message });
- add2hash_($common, { grep_allowed_to_toggle => sub { @_ },
- grep_unselected => sub { grep { $common->{node_state}($_) eq 'unselected' } @_ },
- check_interactive_to_toggle => sub { 1 },
- toggle_nodes => sub {
- my ($set_state, @nodes) = @_;
- my $new_state = !$common->{grep_unselected}($nodes[0]) ? 'selected' : 'unselected';
- $set_state->($_, $new_state) foreach @nodes;
- },
- });
- $o->ask_browse_tree_info_refW($common);
-}
-sub ask_browse_tree_info_refW { #- default definition, do not use with too many items (memory consuming)
- my ($o, $common) = @_;
- my ($l, $v, $h) = ([], [], {});
- $common->{build_tree}(sub {
- my ($node) = $common->{grep_allowed_to_toggle}(@_);
- if (my $state = $node && $common->{node_state}($node)) {
- push @$l, $node;
- $state eq 'selected' and push @$v, $node;
- $h->{$node} = $state eq 'selected';
- }
- }, 'flat');
- add2hash_($common, { list => $l, #- TODO interactivity of toggle is missing
- values => $v,
- help => sub { $common->{get_info}($_[0]) },
- });
- my ($new_v) = $o->ask_many_from_list($common->{title}, $common->{message}, $common) or return;
- $common->{toggle_nodes}(sub {}, grep { ! delete $h->{$_} } @$new_v);
- $common->{toggle_nodes}(sub {}, grep { $h->{$_} } keys %$h);
- 1;
-}
-
-sub wait_message {
- my ($o, $title, $message, $temp) = @_;
-
- my $w = $o->wait_messageW($title, [ _("Please wait"), deref($message) ]);
- push @tempory::objects, $w if $temp;
- my $b = before_leaving { $o->wait_message_endW($w) };
-
- #- enable access through set
- MDK::Common::Func::add_f4before_leaving(sub { $o->wait_message_nextW([ deref($_[1]) ], $w) }, $b, 'set');
- $b;
-}
-
-sub kill {}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/keyboard.pm b/perl-install/keyboard.pm
deleted file mode 100644
index fe2e0f3b0..000000000
--- a/perl-install/keyboard.pm
+++ /dev/null
@@ -1,542 +0,0 @@
-
-package keyboard; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use run_program;
-use log;
-use c;
-
-
-#-######################################################################################
-#- Globals
-#-######################################################################################
-my $KMAP_MAGIC = 0x8B39C07F;
-
-#- a best guess of the keyboard layout, based on the choosen locale
-#- beware only the first 5 characters of the locale are used
-my %lang2keyboard =
-(
- 'af' => 'us_intl',
-#-'ar' => 'ar:80 ar_d:70 ar_azerty:60 ar_azerty_d:50',
- 'az' => 'az:80 tr:10 us_intl:5',
-'az_AZ'=> 'az:80 tr:10 us_intl:5',
- 'be' => 'by:80 ru:50 ru_yawerty:40',
-'be_BE'=> 'by:80 ru:50 ru_yawerty:40',
- 'bg' => 'bg_phonetic:60 bg:50',
-'bg_BG'=> 'bg_phonetic:60 bg:50',
- 'br' => 'fr:90',
- 'bs' => 'hr:60 yu:50 si:40',
- 'ca' => 'es:89 fr:15',
-'ca_Es'=> 'es:89 fr:15',
- 'cs' => 'cz_qwerty:70 cz:50',
- 'cy' => 'uk:90',
-'cy_GB'=> 'uk:90',
- 'da' => 'dk:90',
- 'de' => 'de_nodeadkeys:70 de:50',
-'de_AT'=> 'de_nodeadkeys:70 de:50',
-'de_BE'=> 'be:70 de_nodeadkeys:60 de:50',
-'de_CH'=> 'ch_de:70 ch_fr:25 de_nodeadkeys:20 de:15',
-'de_DE'=> 'de_nodeadkeys:70 de:50',
-'de_LU'=> 'de_nodeadkeys:70 de:50 fr:40 be:35',
- 'el' => 'gr:90',
-'el_GR'=> 'gr:90',
- 'en' => 'us:90 us_intl:50',
-'en_US'=> 'us:90 us_intl:50',
-'en_GB'=> 'uk:89 us:60 us_intl:50',
-'en_IE'=> 'uk:89 us:60 us_intl:50',
- 'eo' => 'us_intl:89 dvorak:20',
-'eo_XX'=> 'us_intl:89 dvorak:20',
- 'es' => 'es:85 la:80 us_intl:50',
-'es@tr'=> 'es:85 la:80 us_intl:50',
-'es_AR'=> 'la:80 us_intl:50 es:20',
-'es_ES'=> 'es:90',
-'es_MX'=> 'la:80 us_intl:50 es:20',
- 'et' => 'ee:90',
- 'eu' => 'es:89 fr:15',
-'eu_ES'=> 'es:89 fr:15',
- 'fa' => 'ir:90',
- 'fi' => 'fi:90',
- 'fr' => 'fr:90',
-'fr_BE'=> 'be:85 fr:5',
-'fr_CA'=> 'qc:85 fr:5',
-'fr_CH'=> 'ch_fr:70 ch_de:15 fr:10',
-'fr_FR'=> 'fr:90',
-'fr_LU'=> 'fr:70 de_nodeadkeys:50 de:40 be:35',
- 'ga' => 'uk:90',
-'ga_IE'=> 'uk:90',
- 'gd' => 'uk:90',
- 'gl' => 'es:90',
-'gl_ES'=> 'es:90',
- 'gv' => 'uk:90',
- 'he' => 'il:89 il_phonetic:10',
-'he_IL'=> 'il:89 il_phonetic:10',
- 'hr' => 'hr:80 si:50',
- 'hu' => 'hu:90',
- 'hy' => 'am:80 am_old:10 am_phonetic:5',
-'hy_AM'=> 'am:80 am_old:10 am_phonetic:5',
- 'id' => 'us:90 us_intl:20',
- 'is' => 'is:90',
- 'iu' => 'iu:90',
- 'it' => 'it:90',
-'it_CH'=> 'ch_fr:80 ch_de:60 it:50',
-'it_IT'=> 'it:90',
- 'ja' => 'jp:80 us:50 us_intl:20',
-'ja_JP'=> 'jp:80 us:50 us_intl:20',
- 'ka' => 'ge_la:80 ge_ru:50',
-'ka_GE'=> 'ge_la:80 ge_ru:50',
- 'kl' => 'dk:80 us_intl:30',
- 'ko' => 'kr:80 us:60',
-'ko_KR'=> 'kr:80 us:60',
- 'kw' => 'uk:90',
- 'lo' => 'us:60',
- 'lt' => 'lt:80 lt_new:70 lt_b:60 lt_p:50',
- 'lv' => 'lv:80 lt:40 lt_new:30 lt_b:20 lt_p:10 ee:5',
- 'mi' => 'us_intl:60 uk:20 us:10',
-'mk_MK'=> 'mk:80',
- 'mk' => 'mk:80',
- 'ms' => 'us:90 us_intl:20',
- 'nb' => 'no:85 dvorak_no:10',
-'nl_BE'=> 'be:80 nl:10 us_intl:5',
-'nl_NL'=> 'us_intl:80 nl:15 us:10 uk:5',
- 'nn' => 'no:85 dvorak_no:10',
- 'no' => 'no:85 dvorak_no:10',
- 'oc' => 'fr:90',
- 'ph' => 'us:90 us_intl:20',
- 'pl' => 'pl:80 pl2:60',
- 'pp' => 'br:80 la:20 pt:10 us_intl:30',
-'pt_BR'=> 'br:80 la:20 pt:10 us_intl:30',
-'pt_PT'=> 'pt:80',
- 'ro' => 'ro2:80 ro:40 us_intl:10',
- 'ru' => 'ru:85 ru_yawerty:80',
-'ru_RU'=> 'ru:85 ru_yawerty:80',
-'ru_UA'=> 'ua:50 ru:40 ru_yawerty:30',
- 'sk' => 'sk_qwerty:80 sk:70',
- 'sl' => 'si:80 hr:50',
- 'sp' => 'sr:80',
-'sp_YU'=> 'sr:80',
- 'sq' => 'al:80',
- 'sr' => 'yu:80',
-'sr_YU'=> 'yu:80',
- 'sv' => 'se:85 fi:30 dvorak_se:10',
-'sv_FI'=> 'fi:85 sv:20',
-'sv_SE'=> 'se:85 fi:20',
- 'ta' => 'tml:80',
-'ta_IN'=> 'tml:80',
- 'tg' => 'tj:80 ru_yawerty:40',
-'tg_TJ'=> 'tj:80 ru_yawerty:40',
- 'th' => 'th:90',
-'th_TH'=> 'th:90',
- 'tr' => 'tr_q:85 tr_q:30',
- 'tt' => 'ru:50 ru_yawerty:40',
- 'uk' => 'ua:85 ru:50 ru_yawerty:40',
-'uk_UA'=> 'ua:85 ru:50 ru_yawerty:40',
- 'uz' => 'us:80',
- 'vi' => 'vn:80 us:60 us_intl:50',
-'vi_VN'=> 'vn:80 us:60 us_intl:50',
- 'wa' => 'be:85 fr:5',
-'zh_CN'=> 'us:60',
-'zh_HK'=> 'us:60',
-'zh_TW'=> 'us:60',
-);
-
-# USB kbd table
-# The numeric values are the bCountryCode field (5th byte) of HID descriptor
-my %usb2drakxkbd =
-(
- 0x00 => undef, #- the keyboard don't tell its layout
-#-0x01 => 'ar',
- 0x02 => 'be',
-#-0x03 => 'ca', #- "Canadian bilingual" ??
- 0x04 => 'qc', #- Canadian French
- 0x05 => 'cz',
- 0x06 => 'dk',
- 0x07 => 'fi',
- 0x08 => 'fr',
- 0x09 => 'de',
- 0x0a => 'gr',
- 0x0b => 'il',
- 0x0c => 'hu',
- 0x0d => 'us_intl', #- "international ISO" ??
- 0x0e => 'it',
- 0x0f => 'jp',
- 0x10 => 'kr', #- Korean
- 0x11 => 'la',
- 0x12 => 'nl',
- 0x13 => 'no',
- 0x14 => 'ir',
- 0x15 => 'pl',
- 0x16 => 'pt',
- 0x17 => 'ru',
- 0x18 => 'sk',
- 0x19 => 'es',
- 0x1a => 'se',
- 0x1b => 'ch_de',
- 0x1c => 'ch_de',
- 0x1d => 'ch_de', #- USB spec says just "Swiss"
-#-0x1e => 'tw', # Taiwan
- 0x1f => 'tr_q',
- 0x20 => 'uk',
- 0x21 => 'us',
- 0x22 => 'yu',
- 0x23 => 'tr_f',
-#- higher codes not attribued as of 2002-02
-);
-
-#- key = extension for Xmodmap file, [0] = description of the keyboard,
-#- [1] = name for loadkeys, [2] = name for XKB, [3] = "1" if it is
-#- a multigroup layout (eg: one with latin/non-latin letters)
-my %keyboards = (
-arch() =~ /^sparc/ ? (
- "cz" => [ __("Czech (QWERTZ)"), "sunt5-cz-us", "cz", 0 ],
- "de" => [ __("German"), "sunt5-de-latin1", "de", 0 ],
- "dvorak" => [ __("Dvorak"), "sundvorak", "dvorak",0 ],
- "es" => [ __("Spanish"), "sunt5-es", "es", 0 ],
- "fi" => [ __("Finnish"), "sunt5-fi-latin1", "fi", 0 ],
- "fr" => [ __("French"), "sunt5-fr-latin1", "fr", 0 ],
- "no" => [ __("Norwegian"), "sunt4-no-latin1", "no", 0 ],
- "pl" => [ __("Polish"), "sun-pl-altgraph", "pl", 0 ],
- "ru" => [ __("Russian"), "sunt5-ru", "ru", 1 ],
-# TODO: check the console map
- "se" => [ __("Swedish"), "sunt5-fi-latin1", "se", 0 ],
- "uk" => [ __("UK keyboard"), "sunt5-uk", "gb", 0 ],
- "us" => [ __("US keyboard"), "sunkeymap", "us", 0 ],
-) : (
- "al" => [ __("Albanian"), "al", "al", 0 ],
- "am_old" => [ __("Armenian (old)"),"am_old", "am(old)", 1 ],
- "am" => [ __("Armenian (typewriter)"),"am-armscii8","am", 1 ],
- "am_phonetic" => [ __("Armenian (phonetic)"),"am_phonetic","am(phonetic)",1 ],
-#-"ar_azerty" => [ __("Arabic (AZERTY)"),"ar-8859_6","ar(azerty)",1 ],
-#-"ar_azerty_d" => [ __("Arabic (AZERTY, arabic digits)"),"ar-8859_6","ar(azerty_digits)",1 ],
-#-"ar" => [ __("Arabic (QWERTY)"),"ar-8859_6", "ar", 1 ],
-#-"ar_d" => [ __("Arabic (QWERTY, arabic digits)"),"ar-8859_6","ar(digits)",1 ],
- "az" => [ __("Azerbaidjani (latin)"),"az", "az", 0 ],
-#"a3" => [ __("Azerbaidjani (cyrillic)"), "az-koi8k","az(cyrillic)",1 ],
- "be" => [ __("Belgian"), "be2-latin1", "be", 0 ],
-"bg_phonetic" => [ __("Bulgarian (phonetic)"),"bg", "bg(phonetic)", 1 ],
- "bg" => [ __("Bulgarian (BDS)"), "bg", "bg", 1 ],
- "br" => [ __("Brazilian (ABNT-2)"),"br-abnt2", "br", 0 ],
- "by" => [ __("Belarusian"), "by-cp1251", "by", 1 ],
- "ch_de" => [ __("Swiss (German layout)"), "sg-latin1", "de_CH", 0 ],
- "ch_fr" => [ __("Swiss (French layout)"), "fr_CH-latin1", "fr_CH", 0 ],
- "cz" => [ __("Czech (QWERTZ)"), "cz-latin2", "cz", 0 ],
- "cz_qwerty" => [ __("Czech (QWERTY)"), "cz-lat2", "cz_qwerty", 0 ],
- "de" => [ __("German"), "de-latin1", "de", 0 ],
- "de_nodeadkeys" => [ __("German (no dead keys)"), "de-latin1-nodeadkeys", "de(nodeadkeys)", 0 ],
- "dk" => [ __("Danish"), "dk-latin1", "dk", 0 ],
- "dvorak" => [ __("Dvorak (US)"), "pc-dvorak-latin1", "dvorak", 0 ],
- "dvorak_no" => [ __("Dvorak (Norwegian)"), "no-dvorak", "dvorak(no)", 0 ],
- "dvorak_se" => [ __("Dvorak (Swedish)"), "se-dvorak", "dvorak(se)", 0 ],
- "ee" => [ __("Estonian"), "ee-latin9", "ee", 0 ],
- "es" => [ __("Spanish"), "es-latin1", "es", 0 ],
- "fi" => [ __("Finnish"), "fi-latin1", "fi", 0 ],
- "fr" => [ __("French"), "fr-latin1", "fr", 0 ],
- "ge_ru"=>[__("Georgian (\"Russian\" layout)"),"ge_ru-georgian_academy","ge_ru",1],
- "ge_la"=>[__("Georgian (\"Latin\" layout)"),"ge_la-georgian_academy","ge_la",1],
- "gr" => [ __("Greek"), "gr-8859_7", "el", 1 ],
- "hu" => [ __("Hungarian"), "hu-latin2", "hu", 0 ],
- "hr" => [ __("Croatian"), "croat", "hr", 0 ],
- "il" => [ __("Israeli"), "il-8859_8", "il", 1 ],
- "il_phonetic" => [ __("Israeli (Phonetic)"), "hebrew", "il_phonetic", 1 ],
- "ir" => [ __("Iranian"), "ir-isiri_3342", "ir", 1 ],
- "is" => [ __("Icelandic"), "is-latin1", "is", 0 ],
- "it" => [ __("Italian"), "it-latin1", "it", 0 ],
-#"iu" => [ __("Inuktitut"), "iu", "iu", 1 ],
- "jp" => [ __("Japanese 106 keys"), "jp106", "jp", 1 ],
-#There is no XKB korean file yet; but using xmodmap one disables
-# some functioanlity; "us" used for XKB until this is fixed
- "kr" => [ __("Korean keyboard"), "us", "us", 1 ],
- "la" => [ __("Latin American"), "la-latin1", "la", 0 ],
- "lt" => [ __("Lithuanian AZERTY (old)"), "lt-latin7", "lt_a", 0 ],
-#- TODO: write a console kbd map for lt_new
- "lt_new" => [ __("Lithuanian AZERTY (new)"), "lt-latin7", "lt_std", 0 ],
- "lt_b" => [ __("Lithuanian \"number row\" QWERTY"), "ltb-latin7", "lt", 0 ],
- "lt_p" => [ __("Lithuanian \"phonetic\" QWERTY"), "ltp-latin7", "lt_p", 0 ],
- "lv" => [ __("Latvian"), "lv-latin7", "lv", 0 ],
- "mk" => [ __("Macedonian"), "mk", "mk", 1 ],
- "nl" => [ __("Dutch"), "nl-latin1", "nl", 0 ],
- "no" => [ __("Norwegian"), "no-latin1", "no", 0 ],
- "pl" => [ __("Polish (qwerty layout)"), "pl", "pl", 0 ],
- "pl2" => [ __("Polish (qwertz layout)"), "pl-latin2", "pl2", 0 ],
- "pt" => [ __("Portuguese"), "pt-latin1", "pt", 0 ],
- "qc" => [ __("Canadian (Quebec)"), "qc-latin1", "ca_enhanced", 0 ],
-#- TODO: write a console kbd map for ro2
- "ro2" => [ __("Romanian (qwertz)"), "ro2", "ro2", 0 ],
- "ro" => [ __("Romanian (qwerty)"), "ro", "ro", 0 ],
- "ru" => [ __("Russian"), "ru4", "ru(winkeys)", 1 ],
- "ru_yawerty" => [ __("Russian (Yawerty)"), "ru-yawerty", "ru_yawerty", 1 ],
- "se" => [ __("Swedish"), "se-latin1", "se", 0 ],
- "si" => [ __("Slovenian"), "slovene", "si", 0 ],
- "sk" => [ __("Slovakian (QWERTZ)"), "sk-qwertz", "sk", 0 ],
- "sk_qwerty" => [ __("Slovakian (QWERTY)"), "sk-qwerty", "sk_qwerty", 0 ],
-# TODO: console map
- "sr" => [ __("Serbian (cyrillic)"), "sr", "sr", 0 ],
-# no console kbd that I'm aware of
- "tml" => [ __("Tamil"), "us", "tml", 1 ],
- "th" => [ __("Thai keyboard"), "th", "th", 1 ],
-# TODO: console map
- "tj" => [ __("Tajik keyboard"), "ru4", "tj", 1 ],
- "tr_f" => [ __("Turkish (traditional \"F\" model)"), "trf", "tr_f", 0 ],
- "tr_q" => [ __("Turkish (modern \"Q\" model)"), "tr_q-latin5", "tr", 0 ],
-#-"tw => [ __("Chineses bopomofo"), "tw", "tw", 1 ],
- "ua" => [ __("Ukrainian"), "ua", "ua", 1 ],
- "uk" => [ __("UK keyboard"), "uk", "gb", 0 ],
- "us" => [ __("US keyboard"), "us", "us", 0 ],
- "us_intl" => [ __("US keyboard (international)"), "us-latin1", "us_intl", 0 ],
- "vn" => [ __("Vietnamese \"numeric row\" QWERTY"),"vn-tcvn", "vn(toggle)", 0 ],
- "yu" => [ __("Yugoslavian (latin)"), "sr", "yu", 0 ],
-),
-);
-
-#- list of possible choices for the key combinations to toggle XKB groups
-#- (eg in X86Config file: XkbOptions "grp:toggle")
-my %kbdgrptoggle =
-(
- 'toggle' => _("Right Alt key"),
- 'shift_toggle' => _("Both Shift keys simultaneously"),
- 'ctrl_shift_toggle' => _("Control and Shift keys simultaneously"),
- 'caps_toggle' => _("CapsLock key"),
- 'ctrl_alt_toggle' => _("Ctrl and Alt keys simultaneously"),
- 'alt_shift_toggle' => _("Alt and Shift keys simultaneously"),
- 'menu_toggle' => _("\"Menu\" key"),
- 'lwin_toggle' => _("Left \"Windows\" key"),
- 'rwin_toggle' => _("Right \"Windows\" key"),
-);
-
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub keyboards { keys %keyboards }
-sub keyboard2text { $keyboards{$_[0]} && $keyboards{$_[0]}[0] }
-sub keyboard2kmap { $keyboards{$_[0]} && $keyboards{$_[0]}[1] }
-sub keyboard2xkb { $keyboards{$_[0]} && $keyboards{$_[0]}[2] }
-
-sub loadkeys_files {
- my ($err) = @_;
- my $archkbd = arch() =~ /^sparc/ ? "sun" : arch() =~ /i.86/ ? "i386" : arch() =~ /ppc/ ? "mac" : arch();
- my $p = "/usr/lib/kbd/keymaps/$archkbd";
- my $post = ".kmap.gz";
- my %trans = ("cz-latin2" => "cz-lat2");
- my %find_file;
- foreach my $dir (all($p)) {
- $find_file{$dir} = '';
- foreach (all("$p/$dir")) {
- $find_file{$_} and $err->("file $_ is both in $find_file{$_} and $dir") if $err;
- $find_file{$_} = "$p/$dir/$_";
- }
- }
- my (@l, %l);
- foreach (values %keyboards) {
- local $_ = $trans{$_->[1]} || $_->[1];
- my $l = $find_file{"$_$post"} || $find_file{first(/(..)/) . $post};
- if ($l) {
- push @l, $l;
- foreach (`zgrep include $l | grep "^include"`) {
- /include\s+"(.*)"/ or die "bad line $_";
- @l{grep { -e $_ } ("$p/$1.inc.gz")} = ();
- }
- } else {
- $err->("invalid loadkeys keytable $_") if $err;
- }
- }
- uniq(@l, keys %l, grep { -e $_ } map { "$p/$_.inc.gz" } qw(compose euro windowkeys linux-keys-bare));
-}
-
-sub unpack_keyboards {
- my ($k) = @_; $k or return;
- [ grep {
- my $b = $keyboards{$_->[0]};
- $b or log::l("bad keyboard $_->[0] in %keyboard::lang2keyboard");
- $b;
- } map { [ split ':' ] } split ' ', $k ];
-}
-sub lang2keyboards {
- my @li = sort { $b->[1] <=> $a->[1] } map { @$_ } map {
- #- first try with the 5 first chars of LANG; if it fails then try with
- #- with the 2 first chars of LANG before resorting to default.
- unpack_keyboards($lang2keyboard{substr($_, 0, 5)}) || unpack_keyboards($lang2keyboard{substr($_, 0, 2)}) || [ [ ($keyboards{$_} ? $_ : "us") => 100 ] ];
- } @_;
- \@li;
-}
-sub lang2keyboard {
- my ($l) = @_;
- my $kb = lang2keyboards($l)->[0][0];
- $keyboards{$kb} ? $kb : "us"; #- handle incorrect keyboard mapping to us.
-}
-sub usb2drakxkbd {
- my ($cc) = @_;
- my $kb = $usb2drakxkbd{$cc};
-#- TODO: detect when undef is returned because it is actualy not defined
-#- ($cc == 0) and when it is because of an unknown/not listed number;
-#- in that last case it would be nice to display a dialog telling the
-#- user to report the number to us.
- $kb;
-}
-
-sub load {
- my ($keymap) = @_;
- return if $::testing;
-
- my ($magic, @keymaps) = unpack "I i" . c::MAX_NR_KEYMAPS() . "a*", $keymap;
- $keymap = pop @keymaps;
-
- $magic != $KMAP_MAGIC and die "failed to read kmap magic";
-
- local *F;
- sysopen F, "/dev/console", 2 or die "failed to open /dev/console: $!";
-
- my $count = 0;
- foreach (0 .. c::MAX_NR_KEYMAPS() - 1) {
- $keymaps[$_] or next;
-
- my @keymap = unpack "s" . c::NR_KEYS() . "a*", $keymap;
- $keymap = pop @keymap;
-
- my $key = -1;
- foreach my $value (@keymap) {
- $key++;
- c::KTYP($value) != c::KT_SPEC() or next;
- ioctl(F, c::KDSKBENT(), pack("CCS", $_, $key, $value)) or die "keymap ioctl failed ($_ $key $value): $!";
- }
- $count++;
- }
- #- log::l("loaded $count keymap tables");
-}
-
-sub xmodmap_file {
- my ($keyboard) = @_;
- my $f = "$ENV{SHARE_PATH}/xmodmap/xmodmap.$keyboard";
- if (! -e $f) {
- eval {
- require packdrake;
- my $packer = new packdrake("$ENV{SHARE_PATH}/xmodmap.cz2", quiet => 1);
- $packer->extract_archive("/tmp", "xmodmap.$keyboard");
- };
- $f = "/tmp/xmodmap.$keyboard";
- }
- -e $f && $f;
-}
-
-sub setup {
- return if arch() =~ /^sparc/;
-
- #- Xpmac doesn't map keys quite right
- if (arch() =~ /ppc/ && !$::testing && $ENV{DISPLAY}) {
- log::l("Fixing Mac keyboard");
- run_program::run('xmodmap', "-e", "keycode 59 = BackSpace" );
- run_program::run('xmodmap', "-e", "keycode 131 = Shift_R" );
- run_program::run('xmodmap', "-e", "add shift = Shift_R" );
- return;
- }
-
- my ($keyboard) = @_;
- my $o = $keyboards{$keyboard} or return;
-
- log::l("loading keymap $o->[1]");
- if (-e (my $f = "$ENV{SHARE_PATH}/keymaps/$o->[1].bkmap")) {
- load(scalar cat_($f));
- } else {
- local *F;
- if (my $pid = open F, "-|") {
- local $/ = undef;
- eval { load(join('', <F>)) };
- waitpid $pid, 0;
- } else {
- eval {
- require packdrake;
- my $packer = new packdrake("$ENV{SHARE_PATH}/keymaps.cz2", quiet => 1);
- $packer->extract_archive(undef, "$o->[1].bkmap");
- };
- c::_exit(0);
- }
- }
- my $f = xmodmap_file($keyboard);
- eval { run_program::run('xmodmap', $f) } if $f && !$::testing && $ENV{DISPLAY};
-}
-
-sub write {
- my ($prefix, $keyboard, $charset, $isNotDelete) = @_;
-
- my $config = read_raw($prefix);
- put_in_hash($config, {
- KEYTABLE => keyboard2kmap($keyboard),
- KBCHARSET => $charset,
- });
- add2hash_($config, {
- DISABLE_WINDOWS_KEY => bool2yesno(detect_devices::isLaptop()),
- BACKSPACE => $isNotDelete ? "BackSpace" : "Delete",
- });
- setVarsInSh("$prefix/etc/sysconfig/keyboard", $config);
- run_program::rooted($prefix, "dumpkeys > /etc/sysconfig/console/default.kmap") or log::l("dumpkeys failed");
- if (arch() =~ /ppc/) {
- my $s = "dev.mac_hid.keyboard_sends_linux_keycodes = 1\n";
- substInFile {
- $_ = '' if /^\Qdev.mac_hid.keyboard_sends_linux_keycodes/;
- $_ .= $s if eof;
- } "$prefix/etc/sysctl.conf";
- }
-}
-
-sub read_raw {
- my ($prefix) = @_;
- my %config = getVarsFromSh("$prefix/etc/sysconfig/keyboard");
- \%config;
-}
-
-sub read {
- my ($prefix) = @_;
- my $keytable = read_raw($prefix)->{KEYTABLE};
- keyboard2kmap($_) eq $keytable and return $_ foreach keys %keyboards;
- $keyboards{$keytable} && $keytable; #- keep track of unknown keyboard.
-}
-
-sub check {
- require lang;
- $^W = 0;
-
- my $ok = 1;
- my $warn = sub {
- print STDERR "$_[0]\n";
- };
- my $err = sub {
- &$warn;
- $ok = 0;
- };
-
- if (my @l = grep { is_empty_array_ref(lang2keyboards($_)) } lang::list()) {
- $warn->("no keyboard for langs " . join(" ", @l));
- }
- foreach my $lang (lang::list()) {
- my $l = lang2keyboards($lang);
- foreach (@$l) {
- 0 <= $_->[1] && $_->[1] <= 100 or $err->("invalid value $_->[1] in $lang2keyboard{$lang} for $lang in \%lang2keyboard keyboard.pm");
- $keyboards{$_->[0]} or $err->("invalid keyboard $_->[0] in $lang2keyboard{$lang} for $lang in \%lang2keyboard keyboard.pm");
- }
- }
- !$_ || $keyboards{$_} or $err->("invalid keyboard $_ in \%usb2drakxkbd keyboard.pm") foreach values %usb2drakxkbd;
-
- my @xkb_groups = map { if_(/grp:(\S+)/, $1) } cat_('/usr/lib/X11/xkb/rules/xfree86.lst');
- $err->("invalid xkb group toggle '$_' in \%kbdgrptoggle") foreach difference2([ keys %kbdgrptoggle ], \@xkb_groups);
- $warn->("unused xkb group toggle '$_'") foreach difference2(\@xkb_groups, [ keys %kbdgrptoggle ]);
-
- my @xkb_layouts = (#- (map { (split)[0] } grep { /^! layout/ .. /^\s*$/ } cat_('/usr/lib/X11/xkb/rules/xfree86.lst')),
- all('/usr/lib/X11/xkb/symbols'),
- (map { (split)[2] } cat_('/usr/lib/X11/xkb/symbols.dir')));
- $err->("invalid xkb layout $_") foreach difference2([ map { keyboard2xkb($_) } keyboards() ], \@xkb_layouts);
-
- loadkeys_files($err);
-
- exit($ok ? 0 : 1);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/lang.pm b/perl-install/lang.pm
deleted file mode 100644
index 5c70b235c..000000000
--- a/perl-install/lang.pm
+++ /dev/null
@@ -1,902 +0,0 @@
-package lang; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use log;
-
-#-######################################################################################
-#- Globals
-#-######################################################################################
-#- key (to be used in $LC_ALL), [0] = english name, [1] = charset encoding,
-#- [2] = value for $LANG used by DrakX, [3] = value for LANGUAGE (a list of
-#- possible languages, carefully choosen)
-#-
-#- when adding a new language here, also add a line in keyboards list
-
-#
-# NOTE: we cheat for a lot of locales (in particular UTF-8, in DrakX they are
-# the 8bit ones); it's easier like that now. Of course, on the installed
-# system a real UTF-8 locale will be used
-#
-
-my %languages = my @languages = (
-'en_US' => [ 'English|United States', 'C', 'en', 'en_US:en' ],
-'en_GB' => [ 'English|United Kingdom', 'iso-8859-15', 'en', 'en_GB:en' ],
-'en_IE' => [ 'English|Ireland', 'iso-8859-15','en', 'en_IE:en_GB:en' ],
-'en_US.UTF-8'=> [ 'English|UTF-8', 'utf_15', 'en', 'en_US:en' ],
- 'af' => [ 'Afrikaans', 'iso-8859-1', 'af', 'af:en_ZA' ],
-'ar_EG.UTF-8'=> [ 'Arabic', 'utf_ar', 'ar', 'ar' ],
-#'az_AZ.ISO-8859-9E'=> [ 'Azeri (Latin)','iso-8859-9e','az', 'az:tr' ],
-'az_AZ.UTF-8'=> [ 'Azeri (Latin)', 'utf_az', 'az', 'az:tr' ],
- 'be' => [ 'Belarussian (CP1251)', 'cp1251', 'be', 'be:be_BY.CP1251:ru_RU.CP1251' ],
-'be_BY.UTF-8' => [ 'Belarussian (UTF-8)','utf_1251', 'be', 'be:be_BY.CP1251:ru_RU.CP1251' ],
-#- provide aliases for some not very standard names used in po files...
- 'bg' => [ 'Bulgarian (CP1251)', 'cp1251', 'bg', 'bg:bg.CP1251:bg_BG.CP1251:bg_BG' ],
-'bg_BG.UTF-8'=> [ 'Bulgarian (UTF-8)', 'utf_1251', 'bg', 'bg:bg.CP1251:bg_BG.CP1251:bg_BG' ],
- 'br' => [ 'Brezhoneg', 'iso-8859-15','br', 'br:fr_FR:fr' ],
- 'bs' => [ 'Bosnian', 'iso-8859-2', 'bs', 'bs:hr:sr' ],
-'ca_ES' => [ 'Catalan', 'iso-8859-15','ca', 'ca:es_ES:es' ],
- 'cs' => [ 'Czech', 'iso-8859-2', 'cs', 'cs' ],
-# 'cy' => [ 'Cymraeg (Welsh)','iso-8859-14','cy', 'cy:en_GB:en' ],
-'cy_GB.UTF-8'=> [ 'Cymraeg (Welsh)', 'utf_14', 'cy', 'cy:en_GB:en' ],
- 'da' => [ 'Danish', 'iso-8859-15', 'da', 'da' ],
-'de_AT' => [ 'German|Austria', 'iso-8859-15','de', 'de_AT:de' ],
-'de_BE' => [ 'German|Belgium', 'iso-8859-15','de', 'de_BE:de' ],
-'de_CH' => [ 'German|Switzerland', 'iso-8859-15', 'de', 'de_CH:de' ],
-'de_DE' => [ 'German|Germany', 'iso-8859-15','de', 'de_DE:de' ],
- 'el' => [ 'Greek', 'iso-8859-7', 'el', 'el' ],
-'el_GR.UTF-8'=> [ 'Greek (UTF-8)', 'utf_el', 'el', 'el' ],
- 'eo' => [ 'Esperanto', 'utf_3', 'eo', 'eo' ],
-'es_AR' => [ 'Spanish|Argentina', 'iso-8859-1', 'es', 'es_AR:es_UY:es:es_ES' ],
-'es_ES' => [ 'Spanish|Spain (modern sorting)', 'iso-8859-15', 'es', 'es_ES:es' ],
-'es@tradicional' => [ 'Spanish|Spain (traditional sorting)', 'iso-8859-15', 'es', 'es' ],
-'es_ES.UTF-8'=> [ 'Spanish|Spain (UTF-8)','utf_15', 'es', 'es_ES:es' ],
-'es_MX' => [ 'Spanish|Mexico', 'iso-8859-1', 'es', 'es_MX:es:es_ES' ],
- 'et' => [ 'Estonian', 'iso-8859-15','et', 'et' ],
-'eu_ES' => [ 'Euskara (Basque)','iso-8859-15', 'eu', 'eu' ],
-'fa_IR.UTF-8'=> [ 'Farsi (Iranian)', 'utf_fa', 'fa', 'fa' ],
-'fi_FI' => [ 'Finnish (Suomi)', 'iso-8859-15','fi', 'fi' ],
-#-'fo' => [ 'Faroese', 'iso-8859-1', 'fo', 'fo' ],
-'fr_BE' => [ 'French|Belgium', 'iso-8859-15','fr', 'fr_BE:fr' ],
-'fr_CA' => [ 'French|Canada', 'iso-8859-15','fr', 'fr_CA:fr' ],
-'fr_CH' => [ 'French|Switzerland', 'iso-8859-15', 'fr', 'fr_CH:fr' ],
-'fr_FR' => [ 'French|France', 'iso-8859-15','fr', 'fr_FR:fr' ],
-'fr_FR.UTF-8'=> [ 'French|France (UTF-8)','utf_15','fr', 'fr_FR:fr' ],
-'ga_IE' => [ 'Gaeilge (Irish)', 'iso-8859-15','ga', 'ga:en_IE:en' ],
-#-'gd' => [ 'Scottish gaelic', 'iso-8859-14','gd', 'gd:en_GB:en' ],
-'gl_ES' => [ 'Galego (Galician)','iso-8859-15','gl', 'gl:es_ES:pt_PT:pt_BR:es:pt' ],
-#-'gv' => [ 'Manx gaelic', 'iso-8859-14','gv', 'gv:en_GB:en' ],
-#- 'iw' was the old code for hebrew language
-# 'he' => [ 'Hebrew', 'iso-8859-8', 'he', 'he:iw_IL' ],
-'he_IL.UTF-8'=> [ 'Hebrew', 'utf_he', 'he', 'he:iw_IL' ],
- 'hr' => [ 'Croatian', 'iso-8859-2', 'hr', 'hr' ],
- 'hu' => [ 'Hungarian', 'iso-8859-2', 'hu', 'hu' ],
-#'hy_AM.ARMSCII-8'=> [ 'Armenian|ARMSCII-8','armscii-8','hy','hy' ],
-'hy_AM.UTF-8'=> [ 'Armenian', 'utf_hy', 'hy', 'hy' ],
-#- 'in' was the old code for indonesian language; by putting LANGUAGE=id:in_ID
-#- we catch the few catalog files still using the wrong code
- 'id' => [ 'Indonesian', 'iso-8859-1', 'id', 'id:in_ID' ],
- 'is' => [ 'Icelandic', 'iso-8859-1', 'is', 'is' ],
-'it_CH' => [ 'Italian|Switzerland', 'iso-8859-15', 'it', 'it_IT:it' ],
-'it_IT' => [ 'Italian|Italy','iso-8859-15','it', 'it_IT:it' ],
-#-'iu' => [ 'Inuktitut', 'unicodeIU', 'iu', 'iu' ],
- 'ja' => [ 'Japanese', 'jisx0208', 'ja', 'ja_JP.ujis:ja' ],
-'ja_JP.UTF-8'=> [ 'Japanese (UTF-8)', 'utf_ja', 'ja', 'ja_JP.ujis:ja' ],
-'ka_GE.UTF-8'=> [ 'Georgian', 'utf_ka', 'ka', 'ka' ],
-#-'kl' => [ 'Greenlandic (inuit)', 'iso-8859-1', 'kl', 'kl' ],
- 'ko' => [ 'Korean', 'ksc5601', 'ko', 'ko' ],
-'ko_KR.UTF-8'=> [ 'Korean (UTF-8)', 'utf_ko', 'ko', 'ko' ],
-#-'kw' => [ 'Cornish gaelic', 'iso-8859-14','kw', 'kw:en_GB:en' ],
-#-'lo' => [ 'Laotian', 'mulelao-1', 'lo', 'lo' ],
- 'lt' => [ 'Lithuanian', 'iso-8859-13','lt', 'lt' ],
- 'lv' => [ 'Latvian', 'iso-8859-13','lv', 'lv' ],
- 'mi' => [ 'Maori', 'iso-8859-13','mi', 'mi' ],
-# 'mk' => [ 'Macedonian (Cyrillic)','iso-8859-5', 'mk', 'mk' ],
-'mk_MK.UTF-8'=> [ 'Macedonian (Cyrillic)','utf_1251', 'mk', 'mk' ],
- 'ms' => [ 'Malay', 'iso-8859-1', 'ms', 'ms' ],
-# 'mt' => [ 'Maltese|ISO-8859-3', 'iso-8859-3', 'mt', 'mt' ],
-'mt_MT.UTF-8'=> [ 'Maltese', 'utf_3', 'mt', 'mt' ],
-'nl_BE' => [ 'Dutch|Belgium', 'iso-8859-15', 'nl', 'nl_BE:nl' ],
-'nl_NL' => [ 'Dutch|Netherlands','iso-8859-15', 'nl', 'nl_NL:nl' ],
-# 'nb' is the new locale name in glibc 2.2
- 'no' => [ 'Norwegian|Bokmaal', 'iso-8859-1', 'no', 'no:nb:nn:no@nynorsk:no_NY' ],
-# no_NY is used by KDE (but not standard); 'nn' is the new locale in glibc 2.2
- 'nn' => [ 'Norwegian|Nynorsk', 'iso-8859-1', 'no', 'nn:no@nynorsk:no_NY:no:nb' ],
-#-'oc' => [ 'Occitan', 'iso-8859-1', 'oc', 'oc:fr_FR' ],
-#-'pd' => [ 'Plauttdietsch', 'iso-8859-1', 'pd', 'pd' ],
-#-'ph' => [ 'Pilipino', 'iso-8859-1', 'ph', 'ph:tl' ],
- 'pl' => [ 'Polish', 'iso-8859-2', 'pl', 'pl' ],
-#-'pp' => [ 'Papiamento', 'iso-8859-1', 'pp', 'pp' ],
-'pt_BR' => [ 'Portuguese|Brazil', 'iso-8859-1', 'pt_BR', 'pt_BR:pt_PT:pt' ],
-'pt_PT' => [ 'Portuguese|Portugal','iso-8859-15','pt', 'pt_PT:pt:pt_BR' ],
- 'ro' => [ 'Romanian', 'iso-8859-2', 'ro', 'ro' ],
-'ru_RU.KOI8-R' => [ 'Russian|KOI8-R', 'koi8-r', 'ru', 'ru_RU:ru' ],
-'ru_RU.CP1251' => [ 'Russian|CP1251', 'cp1251', 'ru', 'ru_RU:ru' ],
-'ru_RU.UTF-8' => [ 'Russian|UTF-8', 'utf_1251', 'ru', 'ru_RU:ru' ],
- 'sk' => [ 'Slovak', 'iso-8859-2', 'sk', 'sk' ],
- 'sl' => [ 'Slovenian', 'iso-8859-2', 'sl', 'sl' ],
-# 'sp' => [ 'Serbian|Cyrillic (ISO-8859-5)','iso-8859-5', 'sp', 'sp:sr' ],
-#'sp_YU.CP1251'=> [ 'Serbian|Cyrillic (CP1251)','cp1251', 'sp', 'sp:sr' ],
-'sp_YU.UTF-8'=> [ 'Serbian|Cyrillic','utf_1251', 'sp', 'sp:sr' ],
- 'sr' => [ 'Serbian|Latin (ISO-8859-2)','iso-8859-2','sr', 'sr' ],
-'sr_YU.UTF-8'=> [ 'Serbian|Latin (UTF-8)', 'utf_2', 'sr', 'sr' ],
- 'sv' => [ 'Swedish', 'iso-8859-1', 'sv', 'sv' ],
-# there is no tamil font curently; so set DrakX encoding to utf_1
-# note: most of the gnome translations for tamil are broken (using bad
-# encoding)
-'ta_IN.UTF-8'=> [ 'Tamil', 'utf_1', 'ta', 'ta' ],
-'tg_TJ.UTF-8'=> [ 'Tajik', 'utf_koi', 'tg', 'tg' ],
- 'th' => [ 'Thai|TIS-620', 'tis620', 'th', 'th' ],
-'th_TH.UTF-8'=> [ 'Thai (UTF-8)', 'utf_th', 'th', 'th' ],
- 'tr' => [ 'Turkish', 'iso-8859-9', 'tr', 'tr' ],
-#-'tt_RU.UTF-8'=> [ 'Tatar', 'koi8-k', 'tt', 'tt' ],
-#-'ur' => [ 'Urdu', 'cp1256', 'ur', 'ur' ],
-'uk_UA' => [ 'Ukrainian|KOI8-U', 'koi8-u', 'uk', 'uk_UA:uk' ],
-'uk_UA.CP1251'=> [ 'Ukrainian|CP1251', 'cp1251', 'uk', 'uk_UA:uk' ],
-'uk_UA.UTF-8'=> [ 'Ukrainian|UTF-8', 'utf_1251', 'uk', 'uk_UA:uk' ],
- 'uz' => [ 'Uzbek', 'iso-8859-1', 'uz', 'uz' ],
-#'vi_VN.TCVN' => [ 'Vietnamese|TCVN', 'tcvn', 'vi', 'vi' ],
-#'vi_VN.VISCII' => [ 'Vietnamese|VISCII','viscii', 'vi', 'vi' ],
-'vi_VN.UTF-8' => [ 'Vietnamese', 'utf_vi', 'vi', 'vi' ],
- 'wa' => [ 'Walon', 'iso-8859-15', 'wa', 'wa:fr_BE:fr' ],
-#-'yi' => [ 'Yiddish', 'cp1255', 'yi', 'yi' ],
-# NOTE: 'zh' must be in the LANGUAGE list, it is not used for translations
-# themselves but is needed for our selection of locales-xx packages
-# and the language dependent packages resolution
-#'zh_HK.Big5' => [ 'Chinese|Traditional|Hong Kong|Big5', 'Big5', 'zh_TW.Big5', 'zh_TW.Big5:zh_TW:zh_HK:zh' ],
-#'zh_HK.UTF-8' => [ 'Chinese|Traditional|Hong Kong|UTF-8','utf_tw','zh_HK', 'zh_HK:zh_TW.Big5:zh_TW:zh' ],
-'zh_TW.Big5' => [ 'Chinese|Traditional|Big5', 'Big5', 'zh_TW.Big5', 'zh_TW.Big5:zh_TW:zh_HK:zh' ],
-'zh_TW.UTF-8' => [ 'Chinese|Traditional|UTF-8','utf_tw','zh_TW','zh_TW.Big5:zh_TW.big5:zh_TW:zh_HK:zh' ],
-'zh_CN.GB2312' => [ 'Chinese|Simplified|GB2312', 'gb2312', 'zh_CN.GB2312', 'zh_CN.GB2312:zh_CN:zh' ],
-'zh_CN.UTF-8' => [ 'Chinese|Simplified|UTF-8','utf_cn','zh_CN', 'zh_CN.GB2312:zh_CN:zh' ],
-# does this one works?
-#'zh_CN.GB18030' => [ 'Chinese|Simplified|GB18030','gb2312','zh_CN', 'zh_CN.GB2312:zh_CN:zh' ],
-);
-@languages = map { $_->[0] } group_by2(@languages);
-
-my %xim = (
- 'zh_TW.Big5' => {
- ENC => 'big5',
- XIM => 'xcin',
- XIM_PROGRAM => 'xcin',
- XMODIFIERS => '"@im=xcin"',
- CONSOLE_NOT_LOCALIZED => 'yes',
- },
- 'zh_TW.Big5@chinput' => {
- ENC => 'big5',
- XIM => 'Chinput',
- XIM_PROGRAM => 'chinput',
- XMODIFIERS => '"@im=Chinput"',
- CONSOLE_NOT_LOCALIZED => 'yes',
- },
- 'zh_TW.UTF-8' => {
- ENC => 'utf8',
- XIM => 'Chinput',
- XIM_PROGRAM => 'chinput',
- XMODIFIERS => '"@im=Chinput"',
- CONSOLE_NOT_LOCALIZED => 'yes',
- },
- 'zh_CN.GB2312' => {
- ENC => 'gb',
- XIM => 'Chinput',
- XIM_PROGRAM => 'chinput',
- XMODIFIERS => '"@im=Chinput"',
- CONSOLE_NOT_LOCALIZED => 'yes',
- },
- 'zh_CN.UTF-8' => {
- ENC => 'utf8',
- XIM => 'Chinput',
- XIM_PROGRAM => 'chinput',
- XMODIFIERS => '"@im=Chinput"',
- CONSOLE_NOT_LOCALIZED => 'yes',
- },
- 'ko' => {
- ENC => 'kr',
- XIM => 'Ami',
- # NOTE: there are several possible versions of ami, for the different
- # desktops (kde, gnome, etc). So XIM_PROGRAM isn't defined; it will
- # be the xinitrc script, XIM section, that will choose the right one
- # XIM_PROGRAM => 'ami',
- XMODIFIERS => '"@im=Ami"',
- CONSOLE_NOT_LOCALIZED => 'yes',
- },
- 'ko_KR.UTF-8' => {
- ENC => 'utf8',
- XIM => 'Ami',
- # NOTE: there are several possible versions of ami, for the different
- # desktops (kde, gnome, etc). So XIM_PROGRAM isn't defined; it will
- # be the xinitrc script, XIM section, that will choose the right one
- # XIM_PROGRAM => 'ami',
- XMODIFIERS => '"@im=Ami"',
- CONSOLE_NOT_LOCALIZED => 'yes',
- },
- 'ja' => {
- ENC => 'eucj',
- XIM => 'kinput2',
- XIM_PROGRAM => 'kinput2',
- XMODIFIERS => '"@im=kinput2"',
- },
- 'ja_JP.UTF-8' => {
- ENC => 'utf8',
- XIM => 'kinput2',
- XIM_PROGRAM => 'kinput2',
- XMODIFIERS => '"@im=kinput2"',
- },
- # XFree86 has an internal XIM for Thai that enables syntax checking etc.
- # 'Passthroug' is no check at all, 'BasicCheck' accepts bad sequences
- # and convert them to right ones, 'Strict' refuses bad sequences
- 'th' => {
- XIM_PROGRAM => '/bin/true', # it's an internal module
- XMODIFIERS => '"@im=BasicCheck"',
- },
- # xvnkb is not an XIM input method; but an input method of another
- # kind, only XIM_PROGRAM needs to be defined
- 'vi' => {
- XIM_PROGRAM => 'xvnkb',
- },
- 'vi_VN.TCVN' => {
- XIM_PROGRAM => 'xvnkb',
- },
- 'vi_VN.VISCII' => {
- XIM_PROGRAM => 'xvnkb',
- },
-);
-
-sub std2 { "-*-*-medium-r-normal-*-$_[1]-*-*-*-*-*-$_[0]" }
-sub std_ { std2($_[0], 10), std2($_[0], 10) }
-sub std { std2($_[0], $_[1] || 10), std2($_[0], 8) }
-
-#- [0]: console font name; [1]: sfm map for console font (if needed)
-#- [2]: acm file for console font;
-#- [3]: iocharset param for mount; [4]: codepage parameter for mount
-#- [5]: X11 fontset (for DrakX)
-my %charsets = (
- "armscii-8" => [ "arm8", "armscii8.uni", "trivial.trans",
- undef, undef, std_("armscii-8") ],
- "utf_hy" => [ "arm8", "armscii8.uni", "trivial.trans",
- "utf8", undef, std_("armscii-8") ],
-#- chinese needs special console driver for text mode
- "Big5" => [ undef, undef, undef,
- "big5", "950", "-*-*-*-*-*-*-*-*-*-*-*-*-big5-0" ],
- "utf_tw" => [ undef, undef, undef,
- "utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-big5-0" ],
- "gb2312" => [ undef, undef, undef,
- "gb2312", "936", "-*-*-*-*-*-*-*-*-*-*-*-*-gb2312.1980-0" ],
- "utf_cn" => [ undef, undef, undef,
- "utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-gb2312.1980-0" ],
- "utf_ka" => [ "t_geors", "geors.uni", "geors_to_geops.trans",
- "utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-georgian-academy" ],
- "C" => [ "lat1-16", undef, "iso15",
- "iso8859-1", "850", sub { std("iso8859-1", @_) } ],
- "iso-8859-1" => [ "lat1-16", undef, "iso1",
- "iso8859-1", "850", sub { std("iso8859-15", @_) } ],
- "utf_1" => [ "lat0-16", undef, "iso1",
- "utf8", undef, sub { std("iso8859-15", @_) } ],
- "iso-8859-2" => [ "lat2-sun16", undef, "iso02",
- "iso8859-2", "852", sub { std("iso8859-2", @_) } ],
- "utf_2" => [ "lat2-sun16", undef, "iso02",
- "utf8", undef, sub { std("iso8859-2", @_) } ],
- "iso-8859-3" => [ "iso03.f16", undef, "iso03",
- "iso8859-3", undef, std_("iso8859-3") ],
- "utf_3" => [ "iso03.f16", undef, "iso03",
- "utf8", undef, std_("iso8859-3") ],
-# "iso-8859-4" => [ "lat4u-16", undef, "iso04",
-# "iso8859-4", "775", std_("iso8859-4") ],
- "iso-8859-5" => [ "UniCyr_8x16", undef, "iso05",
- "iso8859-5", "855", sub { std("microsoft-cp1251", @_) } ],
-#-#- arabic needs special console driver for text mode [acon]
-#-#- (and gtk support isn't done yet)
- "iso-8859-6" => [ "iso06.f16", "iso06", "trivial.trans",
- "iso8859-6", "864", std_("iso8859-6") ],
- "utf_ar" => [ "iso06.f16", "iso06", "trivial.trans",
- "utf8", "864", std_("iso8859-6") ],
- "iso-8859-7" => [ "iso07.f16", undef, "iso07",
- "iso8859-7", "869", std_("iso8859-7") ],
- "utf_el" => [ "iso07.f16", undef, "iso07",
- "utf8", "869", std_("iso8859-7") ],
-#-#- hebrew needs special console driver for text mode [acon]
-#-#- (and gtk support isn't done yet)
- "iso-8859-8" => [ "iso08.f16", "iso08", "trivial.trans",
-# std_("iso8859-8") ],
- "iso8859-8", "862", std_("microsoft-cp1255") ],
- "iso-8859-9" => [ "iso09.f16", "iso09", "trivial.trans",
- "iso8859-9", "857", sub { std("iso8859-9", @_) } ],
- "iso-8859-13" => [ "tlat7", "iso13", "trivial.trans",
- "iso8859-13", "775", std_("iso8859-13") ],
- "utf_13" => [ "tlat7", "iso13", "trivial.trans",
- "utf8", "775", std_("iso8859-13") ],
- "iso-8859-14" => [ "iso14", undef, "iso14",
- "iso8859-14", "850", std_("iso8859-14") ],
- "utf_14" => [ "iso14", undef, "iso14",
- "utf8", undef, std_("iso8859-14") ],
- "iso-8859-15" => [ "lat0-16", undef, "iso15",
- "iso8859-15", "850", sub { std("iso8859-15", @_) } ],
- "utf_15" => [ "lat0-16", undef, "iso15",
- "utf8", undef, sub { std("iso8859-15", @_) } ],
- "utf_az" => [ "tiso09e", "iso09", "trivial.trans",
- "utf8", undef, std2("iso8859-9e",10) ],
-#- japanese needs special console driver for text mode [kon2]
- "jisx0208" => [ undef, undef, "trivial.trans",
- "euc-jp", "932", "-*-*-*-*-*-*-*-*-*-*-*-*-jisx*.*-0" ],
- "utf_ja" => [ undef, undef, "trivial.trans",
- "utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-jisx*.*-0" ],
- "koi8-r" => [ "UniCyr_8x16", undef, "koi8-r",
- "koi8-r", "866", sub { std("microsoft-cp1251", @_) } ],
- "koi8-u" => [ "UniCyr_8x16", undef, "koi8-u",
- "koi8-u", "866", sub { std("microsoft-cp1251", @_) } ],
- "utf_koi" => [ "koi8-k", "iso01", "trivial.trans",
- "utf8", undef, std("koi8-k") ],
- "cp1251" => [ "UniCyr_8x16", undef, "cp1251",
- "cp1251", "866", sub { std("microsoft-cp1251", @_) } ],
- "utf_1251" => [ "UniCyr_8x16", undef, "cp1251",
- "utf8", undef, sub { std("microsoft-cp1251", @_) } ],
-#- Yiddish needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-# "cp1255" => [ "iso08.f16", "iso08", "trivial.trans",
-# "cp1255", "862", std_("microsoft-cp1255") ],
- "utf_he" => [ "iso08.f16", "iso08", "trivial.trans",
- "utf8", "862", std_("microsoft-cp1255") ],
-#- Urdu needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-# "cp1256" => [ undef, undef, "trivial.trans",
-# undef, "864", std_("microsoft-cp1255") ],
-#- korean needs special console driver for text mode
- "ksc5601" => [ undef, undef, undef,
- "euc-kr", "949", "-*-*-*-*-*-*-*-*-*-*-*-*-ksc5601.1987-*" ],
- "utf_ko" => [ undef, undef, undef,
- "utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-ksc5601.1987-*" ],
-#- I have no console font for Thai...
- "tis620" => [ undef, undef, "trivial.trans",
- "tis-620", "874", std2("tis620.2533-1",12) ],
- "utf_th" => [ undef, undef, "trivial.trans",
- "utf8", "874", std2("tis620.2533-1",12) ],
- "tcvn" => [ "tcvn8x16", "tcvn", "trivial.trans",
- undef, undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
- "viscii" => [ "viscii10-8x16", "viscii.uni", "viscii1.0_to_viscii1.1.trans",
-#- "-*-*-*-*-*-*-*-*-*-*-*-*-viscii1.1-1" ],
- undef, undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
- "utf_vi" => [ "tcvn8x16", "tcvn", "trivial.trans",
- "utf8", undef, std2("tcvn-5712", 13), std2("tcvn-5712", 10) ],
-#- Farsi (iranian) needs special console driver for text mode [acon]
-#- (and gtk support isn't done yet)
-# "isiri-3342" => [ undef, undef, "trivial.trans",
-# undef, undef, "-*-*-*-*-*-*-*-*-*-*-*-*-isiri-3342" ],
- "utf_fa" => [ undef, undef, "trivial.trans",
- "utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-iso10646-1" ],
-# "tscii-0" => [ "tamil", undef, "trivial.trans",
-# undef, undef, "-*-*-*-*-*-*-*-*-*-*-*-*-tscii-0" ],
- "unicode" => [ undef, undef, "trivial.trans",
- "utf8", undef, "-*-*-*-*-*-*-*-*-*-*-*-*-iso10646-1" ],
-);
-
-my %bigfonts = (
- Big5 => 'taipei16.pcf.gz',
- gb2312 => 'gb16fs.pcf.gz',
- jisx0208 => 'k14.pcf.gz',
- ksc5601 => 'baekmuk_gulim_h_14.pcf.gz',
- unicode => 'cu12.pcf.gz',
-);
-
-#- for special cases not handled magically
-my %charset2kde_charset = (
- gb2312 => 'gb2312.1980-0',
- jisx0208 => 'jisx0208.1983-0',
- ksc5601 => 'ksc5601.1987-0',
- Big5 => 'big5-0',
- cp1251 => 'microsoft-cp1251',
- utf8 => 'iso10646-1',
- tis620 => 'tis620-0',
-);
-
-#- for special cases not handled magically
-my %lang2country = (
- ar => 'eg',
- be => 'by',
- bs => 'bh',
- cs => 'cz',
- da => 'dk',
- el => 'gr',
- et => 'ee',
- ko => 'kr',
- mi => 'nz',
- ms => 'my',
- nn => 'no',
- sl => 'si',
- sp => 'sr',
- sv => 'se',
-);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-
-sub list {
- my (%options) = @_;
- my @l = @languages;
- if ($options{exclude_non_necessary_utf8}) {
- my %LANGs_non_utf8 = map { lang2LANG($_) => 1 } grep { !/UTF-8/ } @languages;
- @l = grep { !/UTF-8/ || !$LANGs_non_utf8{lang2LANG($_)} } @l;
- }
- if ($options{exclude_non_installed_langs}) {
- @l = grep { -e "/usr/share/locale/" . lang2LANG($_) . "/LC_CTYPE" } @l;
- }
- @l;
-}
-sub lang2text { exists $languages{$_[0]} && $languages{$_[0]}[0] }
-sub lang2charset { exists $languages{$_[0]} && $languages{$_[0]}[1] }
-sub lang2LANG { exists $languages{$_[0]} && $languages{$_[0]}[2] }
-sub lang2LANGUAGE { exists $languages{$_[0]} && $languages{$_[0]}[3] }
-sub getxim { $xim{$_[0]} }
-
-sub lang2country {
- my ($lang, $prefix) = @_;
-
- my $dir = "$prefix/usr/share/locale/l10n";
- my @countries = grep { -d "$dir/$_" } all($dir);
- my %countries; @countries{@countries} = ();
-
- my $valid_country = sub {
- my ($country) = @_;
- #- fast & dirty solution to ensure bad entries do not happen
- exists $countries{$country} && $country;
- };
-
- my $country;
- if ($country ||= $lang2country{$lang}) {
- return $valid_country->($country) ? $country : 'C';
- }
- $country ||= $valid_country->(lc($1)) if $lang =~ /([A-Z]+)/;
- $country ||= $valid_country->(lc($1)) if lang2LANGUAGE($lang) =~ /([A-Z]+)/;
- $country ||= $valid_country->(substr($lang, 0, 2));
- $country ||= first(grep { $valid_country->($_) } map { substr($_, 0, 2) } split(':', lang2LANGUAGE($lang)));
- $country || 'C';
-}
-
-
-sub country2lang {
- my ($country, $default) = @_;
-
- my $uc_country = uc $country;
- my %country2lang = reverse %lang2country;
-
- my ($lang1, $lang2);
- $lang1 ||= $country2lang{$country};
- $lang1 ||= first(grep { /^$country/ } list());
- $lang1 ||= first(grep { /_$uc_country/ } list());
- $lang2 ||= first(grep { int grep { /^$country/ } split(':', lang2LANGUAGE($_)) } list());
- $lang2 ||= first(grep { int grep { /_$uc_country/ } split(':', lang2LANGUAGE($_)) } list());
- ($lang1 =~ /UTF-8/ && $lang2 !~ /UTF-8/ ? $lang2 || $lang1 : $lang1 || $lang2) || $default || 'en_US';
-}
-
-sub lang2kde_lang {
- my ($lang, $default) = @_;
-
- #- get it using
- #- echo C $(rpm -qp --qf "%{name}\n" /RPMS/kde-i18n-* | sed 's/kde-i18n-//')
- my @valid_kde_langs = qw(C af az bg ca cs da de el en_GB eo es et fi fr he hu is it ja ko lt lv mt nl no no_NY pl pt pt_BR ro ru sl sk sr sv ta th tr uk xh zh_CN.GB2312 zh_TW.Big5);
- my %valid_kde_langs; @valid_kde_langs{@valid_kde_langs} = ();
-
- my $valid_lang = sub {
- my ($lang) = @_;
- #- fast & dirty solution to ensure bad entries do not happen
- $lang eq 'en' ? 'C' :
- exists $valid_kde_langs{$lang} ? $lang :
- exists $valid_kde_langs{substr($lang, 0, 2)} ? substr($lang, 0, 2) : '';
- };
-
- my $r;
- $r ||= $valid_lang->(lang2LANG($lang));
- $r ||= first(grep { $valid_lang->($_) } split(':', lang2LANGUAGE($lang)));
- $r || $default || 'C';
-}
-
-sub kde_lang2lang {
- my ($klang, $default) = @_;
- first(grep { /^$klang/ } list()) || $default || 'en_US';
-}
-
-sub kde_lang_country2lang {
- my ($klang, $country, $default) = @_;
- my $uc_country = uc $country;
- # country is used to precise the lang
- my @choices = grep { /^$klang/ } list();
- my @sorted =
- @choices == 2 && length $choices[0] !~ /[._]/ && $choices[1] =~ /UTF-8/ ? @choices :
- map { $_->[0] } sort { $b->[1] <=> $a->[1] } map { [ $_ => /_$uc_country/ ] } @choices;
-
- $sorted[0] || $default || 'en_US';
-}
-
-sub charset2kde_charset {
- my ($charset, $default) = @_;
- my $iocharset = ($charsets{$charset} || [])->[3];
-
- my @valid_kde_charsets = qw(big5-0 gb2312.1980-0 iso10646-1 iso8859-1 iso8859-4 iso8859-6 iso8859-8 iso8859-13 iso8859-14 iso8859-15 iso8859-2 iso8859-3 iso8859-5 iso8859-7 iso8859-9 koi8-r koi8-u ksc5601.1987-0 jisx0208.1983-0 microsoft-cp1251 tis620-0);
- my %valid_kde_charsets; @valid_kde_charsets{@valid_kde_charsets} = ();
-
- my $valid_charset = sub {
- my ($charset) = @_;
- #- fast & dirty solution to ensure bad entries do not happen
- exists $valid_kde_charsets{$charset} && $charset;
- };
-
- my $r;
- $r ||= $valid_charset->($charset2kde_charset{$charset});
- $r ||= $valid_charset->($charset2kde_charset{$iocharset});
- $r ||= $valid_charset->($iocharset);
- $r || $default || 'iso10646-1';
-}
-
-#- font+size for different charsets; the field [0] is the default,
-#- others are overrridens for fixed(1), toolbar(2), menu(3) and taskbar(4)
-my %charset2kde_font = (
- 'C' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
- 'iso-8859-1' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
- 'iso-8859-2' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
- 'iso-8859-9' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
- 'iso-8859-15' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
- 'utf_1' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
- 'utf_2' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
- 'utf_15' => [ "adobe-helvetica,12", "courier,10", "adobe-helvetica,11" ],
- 'gb2312' => [ "default-ming,16" ],
- 'jisx0208' => [ "misc-fixed,14", "wadalab-gothic,13" ],
- 'ksc5601' => [ "daewoo-gothic,16" ],
- 'Big5' => [ "taipei-fixed,16" ],
- 'utf_hy' => [ "clearlyu,17" ],
- 'utf_ka' => [ "clearlyu,17" ],
- 'utf_vi' => [ "misc-fixed,13", "misc-fixed,13", "misc-fixed,10", ],
- 'default' => [ "misc-fixed,13", "misc-fixed,13", "misc-fixed,10", ],
-);
-
-sub charset2kde_font {
- my ($charset, $type) = @_;
- my $kdecharset = charset2kde_charset($charset);
-
- my $font = $charset2kde_font{$charset} || $charset2kde_font{default};
- my $r = $font->[$type] || $font->[0];
-
- #- the format is "font-name,size,5,kdecharset,0,0" I have no idea of the
- #- meaning of that "5"...
- "$r,5,$kdecharset,0,0";
-}
-
-sub set {
- my ($lang, $translate_for_console) = @_;
-
- if ($lang && !exists $languages{$lang}) {
- #- try to find the best lang
- my ($lang2) = grep { /^\Q$lang/ } list(); #- $lang is not precise enough, choose the first complete
- my ($lang3) = grep { $lang =~ /^\Q$_/ } list(); #- $lang is too precise, choose the first substring matching
- log::l("lang::set: fixing $lang with ", $lang2 || $lang3);
- $lang = $lang2 || $lang3;
- }
-
- if ($lang && exists $languages{$lang}) {
- #- use "packdrake -x" that follow symlinks and expand directory.
- #- it is necessary as there is a lot of symlinks inside locale.cz2,
- #- using a compressed cpio archive is nighmare to extract all files.
- #- reset locale environment variable to avoid any warnings by perl,
- #- so installation of new locale is done with empty locale ...
- if (!-e "$ENV{SHARE_PATH}/locale/$lang" && common::usingRamdisk()) {
- @ENV{qw(LANG LC_ALL LANGUAGE LINGUAS)} = ();
-
- eval { rm_rf("$ENV{SHARE_PATH}/locale") };
- eval {
- require packdrake;
- my $packer = new packdrake("$ENV{SHARE_PATH}/locale.cz2", quiet => 1);
- $packer->extract_archive("$ENV{SHARE_PATH}/locale", lang2LANG($lang));
-
- #- LC_COLLATE and LC_CTYPE are getFile'd (cuz they are big, causing the .cz2 to be *big*)
- my ($dir) = glob_("$ENV{SHARE_PATH}/locale/*");
- install_any::getAndSaveFile ("$dir/$_") foreach 'LC_COLLATE', 'LC_CTYPE';
- };
- }
-
-#- set all LC_* variables to a unique locale ("C"), and only redefine
-#- LC_CTYPE (for X11 choosing the fontset) and LANGUAGE (for the po files)
- $ENV{LC_NUMERIC} = "C";
- $ENV{LC_TIME} = "C";
- $ENV{LC_COLLATE} = "C";
- $ENV{LC_MONETARY} = "C";
- $ENV{LC_PAPER} = "C";
- $ENV{LC_NAME} = "C";
- $ENV{LC_ADDRESS} = "C";
- $ENV{LC_TELEPHONE} = "C";
- $ENV{LC_MEASUREMENT} = "C";
- $ENV{LC_IDENTIFICATION} = "C";
-
-#- use lang2LANG() to define LC_CTYPE, so DrakX will use a same encoding
-#- for all variations of a same language, eg both 'ru_RU.KOI8-R' and
-#- 'ru_RU.UTF-8' will be handled the same (as 'ru') by DrakX.
-#- that way DrakX only needs a reduced set of locale and fonts support.
-#- of course on the installed system they will be different.
- $ENV{LC_CTYPE} = lang2LANG($lang);
- $ENV{LC_MESSAGES} = lang2LANG($lang);
- $ENV{LANG} = lang2LANG($lang);
-
- if ($translate_for_console && $lang =~ /^(ko|ja|zh|th)/) {
- log::l("not translating in console");
- $ENV{LANGUAGE} = 'C';
- } else {
- $ENV{LANGUAGE} = lang2LANGUAGE($lang);
- }
- load_mo();
- } else {
- # stick with the default (English) */
- delete $ENV{LANG};
- delete $ENV{LC_ALL};
- delete $ENV{LANGUAGE};
- delete $ENV{LINGUAS};
- }
- $lang;
-}
-
-sub langs {
- my ($l) = @_;
- grep { $l->{$_} } keys %$l;
-}
-
-sub langsLANGUAGE {
- my ($l) = @_;
- my @l = $l->{all} ? list() : langs($l);
- uniq(map { split ':', lang2LANGUAGE($_) } @l);
-}
-
-sub pack_langs {
- my ($l) = @_;
- my $s = $l->{all} ? 'all' : join ':', uniq(map { lang2LANGUAGE($_) } langs($l));
- $ENV{RPM_INSTALL_LANG} = $s;
- $s;
-}
-
-sub unpack_langs {
- my ($s) = @_;
- my @l = uniq(map { split ':', lang2LANGUAGE($_) } split(':', $s));
- my @l2 = intersection(\@l, [ keys %languages ]);
- +{ map { $_ => 1 } @l2 };
-}
-
-sub read {
- my ($prefix, $user_only) = @_;
- my ($f1, $f2) = ("$prefix$ENV{HOME}/.i18n", "$prefix/etc/sysconfig/i18n");
- my %h = getVarsFromSh($user_only && -e $f1 ? $f1 : $f2);
- my $lang = $h{LC_MESSAGES} || 'en_US';
- $lang = bestMatchSentence($lang, list()) if !exists $languages{$lang};
- my $langs = $user_only ? () :
- cat_("$prefix/etc/rpm/macros") =~ /%_install_langs (.*)/ ? unpack_langs($1) : { $lang => 1 };
- $lang, $langs;
-}
-
-sub write_langs {
- my ($prefix, $langs) = @_;
- my $s = pack_langs($langs);
- symlink "$prefix/etc/rpm", "/etc/rpm" if $prefix;
- substInFile { s/%_install_langs.*//; $_ .= "%_install_langs $s\n" if eof && $s } "$prefix/etc/rpm/macros";
-}
-
-sub write {
- my ($prefix, $lang, $user_only, $dont_touch_kde_files) = @_;
-
- $lang or return;
-
- my $h = {};
- $h->{$_} = $lang foreach qw(LC_COLLATE LC_CTYPE LC_MESSAGES LC_NUMERIC LC_MONETARY LC_TIME);
- if ($lang && exists $languages{$lang}) {
-## note: KDE is unable to use the keyboard if LC_* and LANG values differ...
-# add2hash $h, { LANG => lang2LANG($lang), LANGUAGE => lang2LANGUAGE($lang) };
- add2hash $h, { LANG => $lang, LANGUAGE => lang2LANGUAGE($lang) };
-
- my $c = $charsets{lang2charset($lang) || ''};
- if ($c && !$user_only) {
- my $p = "$prefix/usr/lib/kbd";
- if ($c->[0]) {
- eval {
- cp_af("$p/consolefonts/$c->[0].psf.gz", "$prefix/etc/sysconfig/console/consolefonts");
- add2hash $h, { SYSFONT => $c->[0] };
- };
- $@ and log::l("missing console font $c->[0]");
- }
- if ($c->[1]) {
- eval {
- cp_af(glob_("$p/consoletrans/$c->[1]*"), "$prefix/etc/sysconfig/console/consoletrans");
- add2hash $h, { UNIMAP => $c->[1] };
- };
- $@ and log::l("missing console unimap file $c->[1]");
- }
- if ($c->[2]) {
- eval {
- cp_af(glob_("$p/consoletrans/$c->[2]*"), "$prefix/etc/sysconfig/console/consoletrans");
- add2hash $h, { SYSFONTACM => $c->[2] };
- };
- $@ and log::l("missing console acm file $c->[2]");
- }
-
- }
- add2hash $h, $xim{$lang};
- }
- setVarsInSh($prefix . ($user_only ? "$ENV{HOME}/.i18n" : '/etc/sysconfig/i18n'), $h);
-
- eval {
- my $charset = lang2charset($lang);
- my $confdir = $prefix . ($user_only ? "$ENV{HOME}/.kde" : '/usr') . '/share/config';
- my ($prev_kde_charset) = cat_("$confdir/kdeglobals") =~ /^Charset=(.*)/mi;
-
- mkdir_p($confdir);
-
- update_gnomekderc("$confdir/kdeglobals", Locale => (
- Charset => charset2kde_charset($charset),
- Country => lang2country($lang, $prefix),
- Language => lang2kde_lang($lang),
- ));
-
- if ($prev_kde_charset ne charset2kde_charset($charset)) {
- update_gnomekderc("$confdir/kdeglobals", WM => (
- activeFont => charset2kde_font($charset,0),
- ));
- update_gnomekderc("$confdir/kdeglobals", General => (
- fixed => charset2kde_font($charset, 1),
- font => charset2kde_font($charset, 0),
- menuFont => charset2kde_font($charset, 3),
- taskbarFont => charset2kde_font($charset, 4),
- toolBarFont => charset2kde_font($charset, 2),
- ));
- update_gnomekderc("$confdir/konquerorrc", FMSettings => (
- StandardFont => charset2kde_font($charset, 0),
- ));
- update_gnomekderc("$confdir/kdesktoprc", FMSettings => (
- StandardFont => charset2kde_font($charset, 0),
- ));
- }
- } if !$dont_touch_kde_files;
-}
-
-sub bindtextdomain() {
- my $localedir = "$ENV{SHARE_PATH}/locale";
- $localedir .= "_special" if $::isInstall;
-
- c::setlocale();
- c::bindtextdomain('libDrakX', $localedir);
-
- $localedir;
-}
-
-sub load_mo {
- my ($lang) = @_;
-
- my $localedir = bindtextdomain();
- my $suffix = 'LC_MESSAGES/libDrakX.mo';
-
- $lang ||= $ENV{LANGUAGE} || $ENV{LC_ALL} || $ENV{LC_MESSAGES} || $ENV{LANG};
-
- foreach (split ':', $lang) {
- my $f = "$localedir/$_/$suffix";
- -s $f and return $_;
-
- if ($::isInstall && common::usingRamdisk()) {
- # cleanup
- eval { rm_rf($localedir) };
- eval { mkdir_p(dirname("$localedir/$_/$suffix")) };
- install_any::getAndSaveFile ("$localedir/$_/$suffix");
-
- -s $f and return $_;
- }
- }
- '';
-}
-
-
-
-sub console_font_files {
- map { -e $_ ? $_ : "$_.gz" }
- (map { "/usr/lib/kbd/consolefonts/$_.psf" } uniq grep {$_} map { $_->[0] } values %charsets),
- (map { -e $_ ? $_ : "$_.sfm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep {$_} map { $_->[1] } values %charsets),
- (map { -e $_ ? $_ : "$_.acm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep {$_} map { $_->[2] } values %charsets),
-}
-
-sub load_console_font {
- my ($lang) = @_;
- my ($f, $u, $m) = @{$charsets{lang2charset($lang)} || []};
-
- require run_program;
- run_program::run(if_($ENV{LD_LOADER}, $ENV{LD_LOADER}),
- 'consolechars', '-v', '-f', $f || 'lat0-sun16',
- if_($u, '-u', $u), if_($m, '-m', $m));
-}
-
-#-sub load_font {
-#- my ($charset) = @_;
-#- my $fontFile = "lat0-sun16";
-#-
-#- if (my $c = $charsets{$charset}) {
-#- log::l("loading $charset font");
-#- $fontFile = $c->[0];
-#- }
-#-
-#- # text mode font
-#- log::l("loading font $ENV{SHARE_PATH}/consolefonts/$fontFile");
-#- #c::loadFont("/tmp/$fontFile") or log::l("error in loadFont: one of PIO_FONT PIO_UNIMAPCLR PIO_UNIMAP PIO_UNISCRNMAP failed: $!");
-#- #print STDERR "\033(K";
-#-
-#-}
-
-sub get_x_fontset {
- my ($lang, $size) = @_;
-
- my $charset = lang2charset($lang) or return;
- my $c = $charsets{$charset} or return;
- if (my $f = $bigfonts{$charset}) {
- my $dir = "/usr/X11R6/lib/X11/fonts";
- if (! -e "$dir/$f" && $::isInstall && common::usingRamdisk()) {
- unlink "$dir/$_" foreach values %bigfonts;
- install_any::remove_bigseldom_used ();
- install_any::getAndSaveFile ("$dir/$f");
- }
- }
- my ($big, $small) = @$c[5..6];
- ($big, $small) = $big->($size) if ref $big;
- ($big, $small);
-}
-
-sub fs_options {
- my ($lang) = @_;
- my $charset = lang2charset($lang) or return;
- my $c = $charsets{$charset} or return;
- my ($iocharset, $codepage) = @$c[3..4];
- $iocharset, $codepage;
-}
-
-sub charset {
- my ($lang, $prefix) = @_;
- my $l = lang2LANG($lang);
- foreach (cat_("$prefix/usr/X11R6/lib/X11/locale/locale.alias")) {
- /$l:\s+.*\.(\S+)/ and return $1;
- }
- $l =~ /.*\.(\S+)/ and return $1;
-}
-
-
-sub check {
- $^W = 0;
- my $ok = 1;
- my $warn = sub {
- print STDERR "$_[0]\n";
- };
- my $err = sub {
- &$warn;
- $ok = 0;
- };
-
- my @wanted_charsets = uniq map { lang2charset($_) } list();
- $err->("invalid charset $_ ($_ does not exist in \%charsets)") foreach difference2(\@wanted_charsets, [ keys %charsets ]);
- $err->("invalid charset $_ in \%charset2kde_font ($_ does not exist in \%charsets)") foreach difference2([ keys %charset2kde_font ], [ 'default', keys %charsets ]);
- $warn->("unused charset $_ (given in \%charsets, but not used in \%languages)") foreach difference2([ keys %charsets ], \@wanted_charsets);
-
- $warn->("unused entry $_ in \%xim") foreach difference2([ keys %xim ], [ list() ]);
-
- # consolefonts are checked during build via console_font_files()
-
- if (my @l = difference2([ 'default', keys %charsets ], [ keys %charset2kde_font ])) {
- $warn->("no kde font for charset " . join(" ", @l));
- }
-
- if (my @l = grep { lang2country($_) eq 'C' } list()) {
- $warn->("no country for langs " . join(" ", @l));
- }
- if (my @l = grep { lang2kde_lang($_, 'err') eq 'err' } list()) {
- $warn->("no KDE lang for langs " . join(" ", @l));
- }
- if (my @l = grep { charset2kde_charset($_, 'err') eq 'err' } keys %charsets) {
- $warn->("no KDE charset for charsets " . join(" ", @l));
- }
- exit($ok ? 0 : 1);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/list.sparc b/perl-install/list.sparc
deleted file mode 100644
index 448e0b63e..000000000
--- a/perl-install/list.sparc
+++ /dev/null
@@ -1,74 +0,0 @@
-/bin/ash
-/bin/cpio
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/sbin/fdisk
-/sbin/ifport
-/sbin/insmod
-/sbin/mkraid
-/sbin/rmmod
-/sbin/mkdosfs
-/sbin/mke2fs
-/sbin/raidstart
-/usr/bin/bzip2
-/usr/bin/perl
-/usr/lib/libimlib-png.so
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/5.00503/AutoLoader.pm
-/usr/lib/perl5/5.00503/Carp.pm
-/usr/lib/perl5/5.00503/Data/Dumper.pm
-/usr/lib/perl5/5.00503/Exporter.pm
-/usr/lib/perl5/5.00503/FileHandle.pm
-/usr/lib/perl5/5.00503/SelectSaver.pm
-/usr/lib/perl5/5.00503/SelfLoader.pm
-/usr/lib/perl5/5.00503/Symbol.pm
-/usr/lib/perl5/5.00503/Time/Local.pm
-/usr/lib/perl5/5.00503/dumpvar.pl
-/usr/lib/perl5/5.00503/sparc-linux/Config.pm
-/usr/lib/perl5/5.00503/sparc-linux/DynaLoader.pm
-/usr/lib/perl5/5.00503/sparc-linux/Fcntl.pm
-/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/5.00503/sparc-linux/IO/File.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Handle.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Seekable.pm
-/usr/lib/perl5/5.00503/sparc-linux/IO/Socket.pm
-/usr/lib/perl5/5.00503/sparc-linux/Socket.pm
-/usr/lib/perl5/5.00503/sparc-linux/_h2ph_pre.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm-sparc/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/asm-sparc64/unistd.ph
-/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/5.00503/sparc-linux/auto/IO/IO.so
-/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.bs
-/usr/lib/perl5/5.00503/sparc-linux/auto/Socket/Socket.so
-/usr/lib/perl5/5.00503/sparc-linux/bits/syscall.ph
-/usr/lib/perl5/5.00503/sparc-linux/sys/syscall.ph
-/usr/lib/perl5/5.00503/sparc-linux/syscall.ph
-/usr/lib/perl5/5.00503/lib.pm
-/usr/lib/perl5/5.00503/overload.pm
-/usr/lib/perl5/5.00503/strict.pm
-/usr/lib/perl5/5.00503/vars.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Cmd.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Config.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/Net/Netrc.pm
-/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.bs
-/usr/lib/perl5/site_perl/5.005/sparc-linux/auto/Gtk/Gtk.so
-/usr/lib/rpm/rpmrc
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/Xsun
-/usr/X11R6/bin/xmodmap
-/usr/X11R6/lib/modules/xf86Wacom.so
diff --git a/perl-install/live_install b/perl-install/live_install
deleted file mode 100755
index 937661a7d..000000000
--- a/perl-install/live_install
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-
-if [ "$UID" -ne 0 ]; then
- echo >&2 "you need to be root to start live install"
- exit 3
-fi
-
-if [ -x ./Mandrake/mdkinst/usr/bin/perl-install/live_install2 ]; then
- dir=`pwd`/Mandrake/mdkinst
-elif [ -x ../../../../../Mandrake/mdkinst/usr/bin/perl-install/live_install2 ]; then
- dir=`pwd`/../../..
-else
- echo >&2 "unable to get a working live system to start, check your working directory"
- exit 2
-fi
-
-/bin/rm -rf /tmp/image
-/bin/mkdir -m 0700 /tmp/image || exit 1
-/bin/rm -rf /tmp/drakx
-/bin/mkdir -m 0700 /tmp/drakx || exit 2
-
-for i in Mandrake RPMS misc boot images VERSION
-do
- /bin/ln -sf "$dir/../../$i" "/tmp/image/$i"
-done
-
-/bin/cp -a "$dir/../../Mandrake/mdkinst" "/tmp/drakx"
-
-if [ -x "/tmp/drakx/mdkinst/usr/bin/perl-install/live_install2" ]; then
- # get correct fonts for DrakX.
- if [ -n "$DISPLAY" ]; then
- xset +fp /tmp/drakx/mdkinst/usr/X11R6/lib/X11/fonts/
- xset fp rehash
- fi
-
- # avoid pollution for environment
- unset LC_MONETARY LC_CTYPE LC_NUMERIC LC_MESSAGES LC_TIME LC_COLLATE LANGUAGE LANG RPM_INSTALL_LANG
-
- # start DrakX, do not keep shell script in background else the CD is locked by it!!!
- cd /tmp/drakx/mdkinst/usr/bin/perl-install
- exec /usr/bin/perl ./live_install2
-fi
-
-echo >&2 "unable to get a working live system to start, check your working directory"
-exit 2
diff --git a/perl-install/live_install2 b/perl-install/live_install2
deleted file mode 100755
index 58c5e9e83..000000000
--- a/perl-install/live_install2
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/usr/bin/perl
-
-my $dir = `pwd`;
-chomp $dir;
-$dir .= "/../../..";
-
-#- perl version of the install, we use directly the version we found,
-#- this means there SHOULD BE no module compiled for an older version of perl
-#- which will be used by DrakX.
-my ($version, $arch) = (glob "$dir/usr/lib/perl5/*/*/CORE/libperl.so")[0] =~ m|$dir/usr/lib/perl5/([^/]*)/([^/]*)/CORE/libperl.so|;
-
-#- keep it mind the ELF loader to use.
-$ENV{LD_LOADER} = "$dir/lib/ld-linux.so.2";
-
-$ENV{LOCPATH}="$dir/usr/share/locale";
-$ENV{GCONV_PATH}="$dir/usr/lib/gconv";
-$ENV{PERL5LIB} = join ":", map { "$dir/usr/lib/perl5/$_" } ("$version/$arch",
- "$version",
- "site_perl/$version/$arch",
- "site_perl/$version",
- "site_perl");
-$ENV{LD_LIBRARY_PATH} = "$dir/usr/bin:$dir/bin:$dir/sbin:$dir/usr/sbin:$dir/usr/X11R6/bin:$dir/lib:$dir/usr/lib:$dir/usr/lib/perl5/$version/$arch/CORE";
-$ENV{PATH} = join(":", map { "$dir/$_" } split ":", "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin") . ":$ENV{PATH}";
-$ENV{SHARE_PATH} = "$dir/usr/share";
-$ENV{RPMRC_FILE} = "$dir/usr/lib/rpm/rpmrc";
-$ENV{GTK_DATA_PREFIX} = "$dir/usr";
-$ENV{GTK_EXE_PREFIX} = "$dir/usr";
-$ENV{GDK_IMLIB_PATH} = "$dir/usr/lib";
-
-system $ENV{LD_LOADER}, "../perl", "-i", "-pe", "s,^(.*macrofiles[^/]*)(.*),\$1$dir/usr/lib/rpm/macros:\$2,", $ENV{RPMRC_FILE};
-system $ENV{LD_LOADER}, "../perl", "./install2", "--live", @ARGV;
-
-#- at this point, unwind above else they will not run correctly (wrong ld-linux.so.2)
-delete $ENV{GTK_EXE_PREFIX};
-delete $ENV{RPMRC_FILE};
-delete $ENV{LOCPATH};
-delete $ENV{SHARE_PATH};
-delete $ENV{PATH};
-delete $ENV{LD_LIBRARY_PATH};
-delete $ENV{PERL5LIB};
-delete $ENV{LD_LOADER};
-
-$ENV{DISPLAY} and system "xset", "-fp", "/tmp/drakx/mdkinst/usr/X11R6/lib/X11/fonts/";
-foreach (qw(misc PEX Speedo Type1 mdk 75dpi 100dpi cyrillic)) {
- -d "/usr/X11R6/lib/X11/fonts/$_" or next;
- -e "/usr/X11R6/lib/X11/fonts/$_/fonts.dir" and next;
- chdir "/usr/X11R6/lib/X11/fonts/$_";
- system "mkfontdir";
-}
-$ENV{DISPLAY} and system "xset", "fp", "rehash";
-
-system "/bin/rm", "-rf", "/tmp/drakx";
-system "/bin/rm", "-rf", "/tmp/rhimage";
-
-exec "/bin/sync";
diff --git a/perl-install/log.pm b/perl-install/log.pm
deleted file mode 100644
index 649ed30a0..000000000
--- a/perl-install/log.pm
+++ /dev/null
@@ -1,58 +0,0 @@
-package log; # $Id$
-
-use diagnostics;
-use strict;
-use c;
-
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my $logOpen = 0;
-my $logDebugMessages = 0;
-
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub F() { *LOG }
-
-sub l {
- $logOpen or openLog();
- if ($::isStandalone) {
- c::syslog(c::LOG_WARNING(), join("", @_));
- } elsif ($::isInstall) {
- print LOG "* ", @_, "\n";
- print LOG2 "* ", @_, "\n";
- } else {
- print STDERR @_, "\n";
- }
-}
-sub ld { $logDebugMessages and &l }
-sub w { &l }
-
-sub openLog(;$) {
- if ($::isInstall) {
- if ($_[0]) { #- useLocal
- open LOG, "> $_[0]";# or die "no log possible :(";
- } else {
- open LOG, "> /dev/tty3";# or die "no log possible :(";
- }
- open LOG2, ">> /tmp/ddebug.log";# or die "no log possible :(";
- select((select(LOG), $| = 1)[0]);
- select((select(LOG2), $| = 1)[0]);
- }
- exists $ENV{DEBUG} and $logDebugMessages = 1;
- $logOpen = 1;
-}
-
-sub closeLog() {
- if ($::isStandalone) {
- c::closelog();
- } else { close LOG; close LOG2; }
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/loopback.pm b/perl-install/loopback.pm
deleted file mode 100644
index 24c519ecb..000000000
--- a/perl-install/loopback.pm
+++ /dev/null
@@ -1,129 +0,0 @@
-package loopback; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use partition_table qw(:types);
-use fs;
-use fsedit;
-use log;
-
-
-sub carryRootLoopback {
- my ($part) = @_;
- $_->{mntpoint} eq '/' and return 1 foreach @{$part->{loopback} || []};
- 0;
-}
-
-sub check_circular_mounts {
- my ($hd, $part, $all_hds) = @_;
-
- my $fstab = [ fsedit::get_all_fstab($all_hds), $part ]; # no pb if $part is already in $all_hds
-
- my $base_mntpoint = $part->{mntpoint};
- my $check; $check = sub {
- my ($part, @seen) = @_;
- push @seen, $part->{mntpoint} || return;
- @seen > 1 && $part->{mntpoint} eq $base_mntpoint and die _("Circular mounts %s\n", join(", ", @seen));
- if (my $part = fs::up_mount_point($part->{mntpoint}, $fstab)) {
- #- '/' carrier is a special case, it will be mounted first
- $check->($part, @seen) if !carryRootLoopback($part);
- }
- if (isLoopback($part)) {
- $check->($part->{loopback_device}, @seen);
- }
- };
- $check->($part) if !($base_mntpoint eq '/' && isLoopback($part)); #- '/' is a special case, no loop check
-}
-
-sub carryRootCreateSymlink {
- my ($part, $prefix) = @_;
-
- carryRootLoopback($part) or return;
-
- my $mntpoint = "$prefix$part->{mntpoint}";
- unless (-e $mntpoint) {
- eval { mkdir_p(dirname($mntpoint)) };
- #- do non-relative link for install, should be changed to relative link before rebooting
- symlink "/initrd/loopfs", $mntpoint;
-
- mkdir_p("/initrd/loopfs/lnx4win/boot");
- symlink "/initrd/loopfs/lnx4win/boot", "$prefix/boot";
- }
- #- indicate kernel to keep initrd
- mkdir "$prefix/initrd", 0755;
-}
-
-
-sub format_part {
- my ($part, $prefix) = @_;
- fs::mount_part($part->{loopback_device}, $prefix);
- create($part, $prefix);
- fs::real_format_part($part);
-}
-
-sub create {
- my ($part, $prefix) = @_;
- my $f = $part->{device} = "$prefix$part->{loopback_device}{mntpoint}$part->{loopback_file}";
- return if -e $f;
-
- eval { mkdir_p(dirname($f)) };
-
- log::l("creating loopback file $f ($part->{size} sectors)");
-
- local *F;
- my $block_size = 128;
- my $s = "\0" x (512 * $block_size);
- sysopen F, $f, 2 | c::O_CREAT() or die "failed to create loopback file";
- for (my $i = 0; $i < $part->{size}; $i += $block_size) {
- syswrite F, $s or die "failed to create loopback file";
- }
-}
-
-sub getFree {
- my ($dir, $part) = @_;
- my $freespace = $dir ?
- 2 * (MDK::Common::System::df($dir))[1] : #- df in KiB
- $part->{size};
-
- $freespace - sum map { $_->{size} } @{$part->{loopback} || []};
-}
-
-#- returns the size of the loopback file if it already exists
-#- returns -1 is the loopback file can't be used
-sub verifFile {
- my ($dir, $file, $part) = @_;
- -e "$dir$file" and return -s "$dir$file";
-
- $_->{loopback_file} eq $file and return -1 foreach @{$part->{loopback} || []};
-
- undef;
-}
-
-sub prepare_boot {
- my ($prefix) = @_;
- my $r = readlink "$prefix/boot";
- unlink "$prefix/boot";
- mkdir "$prefix/boot", 0755;
- [$r, $prefix];
-}
-
-sub save_boot {
- my ($loop_boot, $prefix) = @{$_[0]};
-
- $loop_boot or return;
-
- my @files = glob_("$prefix/boot/*");
- cp_af(@files, $loop_boot) if @files;
- rm_rf("$prefix/boot");
- symlink $loop_boot, "$prefix/boot";
-}
-
-
-1;
-
diff --git a/perl-install/lvm.pm b/perl-install/lvm.pm
deleted file mode 100644
index 327e07fe2..000000000
--- a/perl-install/lvm.pm
+++ /dev/null
@@ -1,124 +0,0 @@
-package lvm; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use fsedit;
-use devices;
-use run_program;
-
-#- for partition_table_xxx emulation
-sub hasExtended { 0 }
-sub adjustStart {}
-sub adjustEnd {}
-sub write {}
-sub cylinder_size {
- my ($hd) = @_;
- $hd->{PE_size};
-}
-
-init();
-
-sub init {
- eval { modules::load('lvm-mod') };
- run_program::run('vgscan') if !-e '/etc/lvmtab';
- run_program::run('vgchange', '-a', 'y');
-}
-
-sub check {
- my ($in) = @_;
-
- my $f = '/sbin/pvcreate';
- -e $f or $in->do_pkgs->install('lvm');
- -e $f or $in->ask_warn('', "Mandatory package lvm is missing"), return;
- init();
- 1;
-}
-
-sub get_vg {
- my ($part) = @_;
- my $dev = expand_symlinks(devices::make($part->{device}));
- install_any::check_prog ("pvdisplay") if $::isInstall;
- (split(':', `pvdisplay -c $dev`))[1];
-}
-
-sub update_size {
- my ($lvm) = @_;
- install_any::check_prog ("vgdisplay") if $::isInstall;
- my @l = split(':', `vgdisplay -c -D $lvm->{LVMname}`);
- $lvm->{totalsectors} = ($lvm->{PE_size} = $l[12]) * $l[13];
-}
-
-sub get_lvs {
- my ($lvm) = @_;
- install_any::check_prog ("vgdisplay") if $::isInstall;
- my @l = `vgdisplay -v -D $lvm->{LVMname}`;
- install_any::check_prog ("lvdisplay") if $::isInstall;
- $lvm->{primary}{normal} =
- [
- map {
- my $type = -e "/dev/$_" && fsedit::typeOfPart("/dev/$_");
- { device => $_,
- type => $type || 0x83,
- size => (split(':', `lvdisplay -D -c /dev/$_`))[6] }
- } map { m|^LV Name\s+/dev/(\S+)| ? $1 : () } @l
- ];
-}
-
-sub vg_add {
- my ($part) = @_;
- if (my $old_name = get_vg($part)) {
- run_program::run('vgchange', '-a', 'n', $old_name);
- run_program::run('vgremove', $old_name);
- }
- my $dev = expand_symlinks(devices::make($part->{device}));
- run_program::run_or_die('pvcreate', '-y', '-ff', $dev);
- my $prog = run_program::run('vgdisplay', $part->{lvm}) ? 'vgextend' : 'vgcreate';
- run_program::run_or_die($prog, $part->{lvm}, $dev);
-}
-
-sub vg_destroy {
- my ($lvm) = @_;
-
- is_empty_array_ref($lvm->{primary}{normal}) or die _("Remove the logical volumes first\n");
- run_program::run('vgchange', '-a', 'n', $lvm->{LVMname});
- run_program::run_or_die('vgremove', $lvm->{LVMname});
- foreach (@{$lvm->{disks}}) {
- delete $_->{lvm};
- $_->{isFormatted} = 0;
- $_->{notFormatted} = 1;
- }
-}
-
-sub lv_delete {
- my ($lvm, $lv) = @_;
-
- run_program::run_or_die('lvremove', '-f', "/dev/$lv->{device}");
-
- my $list = $lvm->{primary}{normal};
- @$list = grep { $_ != $lv } @$list;
-}
-
-sub lv_create {
- my ($lvm, $lv) = @_;
- my $list = $lvm->{primary}{normal};
- my $nb = 1 + max(map { basename($_->{device}) } @$list);
- $lv->{device} = "$lvm->{LVMname}/$nb";
- run_program::run_or_die('lvcreate', '--size', int($lv->{size} / 2) . 'k', '-n', $nb, $lvm->{LVMname});
- $lv->{notFormatted} = 1;
- $lv->{isFormatted} = 0;
- push @$list, $lv;
-}
-
-sub lv_resize {
- my ($lv, $oldsize) = @_;
- run_program::run_or_die($oldsize > $lv->{size} ? ('lvreduce', '-f') : 'lvextend',
- '--size', int($lv->{size} / 2) . 'k', "/dev/$lv->{device}");
-}
-
-1;
diff --git a/perl-install/modparm.pm b/perl-install/modparm.pm
deleted file mode 100644
index ee5fd46ab..000000000
--- a/perl-install/modparm.pm
+++ /dev/null
@@ -1,63 +0,0 @@
-package modparm; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-
-
-sub parameters {
- my ($module) = @_;
-
- my $modinfo = '/sbin/modinfo';
- -x $modinfo or $modinfo = '/usr/bin/modinfo';
- -x $modinfo or die _('modinfo is not available');
-
- if (!$::isStandalone && !$::testing) {
- modules::extract_modules('/tmp', $module);
- $module = "/tmp/$module.o";
- }
-
- my @parameters;
- foreach (common::join_lines(`$modinfo -p $module`)) {
- chomp;
- next if /^warning:/;
- (my $name, $_) = /(\S+)\s+(.*)/s or warn "modparm::get_options_name($module): unknown line\n";
-
- my $c_types = 'int|string|short|byte|char|long';
- my ($is_a_number, $description, $min, $max) = (0, '', 1, 1);
- if (/^($c_types) array \(min = (\d+), max = (\d+)\),?\s*(.*)/s) {
- $_ = $4;
- #- seems like "char" are buggy entries
- ($is_a_number, $min, $max) = ($1 ne 'string', $2, $3) if $1 ne 'char';
- } elsif (/^($c_types),?\s*(.*)/s) {
- $_ = $2;
- #- here "char" really are size-limited strings, modinfo doesn't display the size limit (but since we don't care about it, it doesn't matter :)
- $is_a_number = $1 ne 'string' if $1 ne 'char';
- } else {
- #- for things like "no format character" or "unknown format character"
- }
- if (/^description "(.*)",?\s*/s) {
- ($description, $_) = ($1, $2);
- }
- #- print "STILL HAVE ($_)\n" if $_;
-
- my $format =
- $min == 1 && $max == 1 ?
- ($is_a_number ? _("a number") : '') :
- $min == $max ?
- ($is_a_number ? _("%d comma separated numbers", $min) : _("%d comma separated strings", $min)) :
- $min == 1 ?
- ($is_a_number ? _("comma separated numbers") : _("comma separated strings")) :
- ''; #- to weird and buggy, do not display it
-
- push @parameters, [ $format ? "$name ($format)" : $name, $description ];
- }
- @parameters;
-}
-
-1;
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
deleted file mode 100644
index 6a87c4081..000000000
--- a/perl-install/modules.pm
+++ /dev/null
@@ -1,389 +0,0 @@
-package modules; # $Id$
-
-use strict;
-
-use common;
-use detect_devices;
-use run_program;
-use log;
-use list_modules;
-
-my %conf;
-
-sub category2modules_and_description {
- my ($categories) = @_;
- my $f = '/lib/modules/' . c::kernel_version() . '/modules.description';
- -e $f or $f = '/lib/modules.description';
- my %modules_descriptions = map { /(\S+)\s+(.*)/ } cat_($f);
- map { $_ => $modules_descriptions{$_} } category2modules($categories);
-}
-
-#-###############################################################################
-#- module loading
-#-###############################################################################
-# handles dependencies
-# eg: load('vfat', 'reiserfs', [ ne2k => 'io=0xXXX', 'dma=5' ])
-sub load {
- #- keeping the order of modules
- my %options;
- my @l = map {
- my ($name, @options) = ref $_ ? @$_ : $_;
- $options{$name} = \@options;
- dependencies_closure($name);
- } @_;
-
- @l = difference2([ uniq(@l) ], [ loaded_modules() ]) or return;
-
- my $network_module = do {
- my ($network_modules, $other) = partition { module2category($_) =~ m,network/(main|usb), } @l;
- if (@$network_modules > 1) {
- # do it one by one
- load($_) foreach @$network_modules;
- load(@$other);
- return;
- }
- $network_modules->[0];
- };
- my @network_devices = $network_module ? detect_devices::getNet() : ();
-
- if ($::testing) {
- log::l("i would load module $_ (@{$options{$_}})") foreach @l;
- } elsif ($::isStandalone || $::live) {
- run_program::run('/sbin/modprobe', $_, @{$options{$_}})
- or die "insmod'ing module $_ failed" foreach @l;
- } else {
- load_raw(map { [ $_ => $options{$_} ] } @l);
- }
- sleep 2 if grep { /^(usb-storage|mousedev|printer)$/ } @l;
-
- if ($network_module) {
- add_alias($_, $network_module) foreach difference2([ detect_devices::getNet() ], \@network_devices);
- }
- when_load($_, @{$options{$_}}) foreach @l;
-}
-
-sub unload {
- if ($::testing) {
- log::l("rmmod $_") foreach @_;
- } else {
- run_program::run("rmmod", $_) foreach @_;
- }
-}
-
-sub load_category {
- my ($category, $wait_message, $probe_type) = @_;
-
- #- probe_category returns the PCMCIA cards. It doesn't know they are already
- #- loaded, so:
- read_already_loaded();
-
- my @try_modules = (
- if_($category =~ /scsi/,
- if_(arch() !~ /ppc/, 'imm', 'ppa'),
- if_(detect_devices::usbStorage(), 'usb-storage'),
- ),
- if_(arch() =~ /ppc/,
- if_($category =~ /scsi/, 'mesh', 'mac53c94'),
- if_($category =~ /net/, 'bmac', 'gmac', 'mace'),
- if_($category =~ /sound/, 'dmasound_awacs'),
- ),
- );
- grep {
- $wait_message->($_->{description}, $_->{driver}) if $wait_message;
- eval { load([ $_->{driver}, $_->{options} ]) };
- $_->{error} = $@;
-
- !($@ && $_->{try});
- } probe_category($category, $probe_type),
- map {; { driver => $_, description => $_, try => 1 } } @try_modules;
-}
-
-sub probe_category {
- my ($category, $probe_type) = @_;
-
- my @modules = category2modules($category);
-
- grep {
- if ($category eq 'isdn') {
- my $b = $_->{driver} =~ /ISDN:([^,]*),?([^,]*),?(.*)/;
- if ($b) {
- $_->{driver} = $1;
- $_->{options} = $2;
- $_->{firmware} = $3;
- $_->{firmware} =~ s/firmware=//;
- $_->{driver} eq "hisax" and $_->{options} .= " id=HiSax";
- }
- $b;
- } else {
- member($_->{driver}, @modules);
- }
- } detect_devices::probeall($probe_type);
-}
-
-sub load_ide {
- eval { load("ide-cd"); }
-}
-
-
-#-###############################################################################
-#- modules.conf functions
-#-###############################################################################
-sub get_alias {
- my ($alias) = @_;
- $conf{$alias}{alias};
-}
-sub get_options {
- my ($name) = @_;
- $conf{$name}{options};
-}
-sub set_options {
- my ($name, $new_option) = @_;
- $conf{$name}{options} = $new_option;
-}
-sub add_alias {
- my ($alias, $module) = @_;
- $module =~ /ignore/ and return;
- /\Q$alias/ && $conf{$_}{alias} && $conf{$_}{alias} eq $module and return $_ foreach keys %conf;
- log::l("adding alias $alias to $module");
- $conf{$alias}{alias} ||= $module;
- $conf{$module}{above} = 'snd-pcm-oss' if $module =~ /^snd-/;
- $alias;
-}
-sub add_probeall {
- my ($alias, $module) = @_;
-
- my $l = $conf{$alias}{probeall} ||= [];
- push @$l, $module;
- log::l("setting probeall scsi_hostadapter to @$l");
-}
-
-sub remove_alias($) {
- my ($name) = @_;
- foreach (keys %conf) {
- $conf{$_}{alias} && $conf{$_}{alias} eq $name or next;
- delete $conf{$_}{alias};
- return 1;
- }
- 0;
-}
-
-sub read_conf {
- my ($file) = @_;
- my %c;
-
- foreach (cat_($file)) {
- next if /^\s*#/;
- my ($type, $alias, $val) = split(/\s+/, chomp_($_), 3) or next;
-
- $val = [ split ' ', $val ] if $type eq 'probeall';
-
- $c{$alias}{$type} = $val;
- }
- #- cheating here: not handling aliases of aliases
- while (my ($k, $v) = each %c) {
- if (my $a = $v->{alias}) {
- local $c{$a}{alias};
- delete $v->{probeall};
- add2hash($c{$a}, $v);
- }
- }
- #- convert old aliases to new probeall
- foreach my $name ('scsi_hostadapter', 'usb-interface') {
- my @old_aliases =
- map { $_->[0] } sort { $a->[1] <=> $b->[1] }
- map { if_(/^$name(\d*)/ && $c{$_}{alias}, [ $_, $1 || 0 ]) } keys %c;
- foreach my $alias (@old_aliases) {
- push @{$c{$name}{probeall} ||= []}, delete $c{$alias}{alias};
- }
- }
-
- \%c;
-}
-
-sub mergein_conf {
- my ($file) = @_;
- my $modconfref = read_conf($file);
- while (my ($key, $value) = each %$modconfref) {
- $conf{$key}{alias} = $value->{alias} if !exists $conf{$key}{alias};
- push @{$conf{$key}{probeall} ||= []}, deref($value->{probeall});
- }
-}
-
-sub write_conf {
- my ($prefix) = @_;
-
- my $file = "$prefix/etc/modules.conf";
- rename "$prefix/etc/conf.modules", $file; #- make the switch to new name if needed
-
- #- Substitute new aliases in modules.conf (if config has changed)
- substInFile {
- my ($type,$alias,$module) = split(/\s+/, chomp_($_), 3);
- if ($type eq 'post-install' && $alias eq 'supermount') {
- #- remove the post-install supermount stuff.
- $_ = '';
- } elsif ($type eq 'alias' && $alias =~ /scsi_hostadapter|usb-interface/) {
- #- remove old aliases which are replaced by probeall
- $_ = '';
- } elsif (
- $conf{$alias}{$type} &&
- $conf{$alias}{$type} ne $module) {
- my $v = join(' ', uniq(deref($conf{$alias}{$type})));
- $_ = "$type $alias $v\n";
- }
- } $file;
-
- my $written = read_conf($file);
-
- local *F;
- open F, ">> $file" or die("cannot write module config file $file: $!\n");
- while (my ($mod, $h) = each %conf) {
- while (my ($type, $v) = each %$h) {
- my $v2 = join(' ', uniq(deref($v)));
- print F "$type $mod $v2\n"
- if $v2 && !$written->{$mod}{$type};
- }
- }
- my @l = ();
- push @l, 'scsi_hostadapter' if !is_empty_array_ref($conf{scsi_hostadapter}{probeall});
- push @l, 'bttv' if grep { $_->{driver} eq 'bttv' } detect_devices::probeall();
- append_to_etc_modules($prefix, @l);
-}
-
-sub append_to_etc_modules {
- my ($prefix, @l) = @_;
- my $l = join '|', map { '^\s*'.$_.'\s*$' } @l;
- log::l("to put in modules ", join(", ", @l));
-
- substInFile {
- $_ = '' if $l && /$l/;
- $_ .= join '', map { "$_\n" } @l if eof;
- } "$prefix/etc/modules";
-}
-
-sub read_stage1_conf {
- mergein_conf($_[0]);
-}
-
-#-###############################################################################
-#- pcmcia various
-#-###############################################################################
-sub configure_pcmcia {
- my ($pcic) = @_;
-
- #- try to setup pcmcia if cardmgr is not running.
- my $running if 0;
- return if $running;
- $running = 1;
-
- if (c::kernel_version() =~ /^2\.2/) {
- my $msg = _("PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel.");
- log::l($msg);
- return $msg;
- }
-
- log::l("i try to configure pcmcia services");
-
- symlink "/tmp/stage2/$_", $_ foreach "/etc/pcmcia";
-
- eval {
- load("pcmcia_core");
- load($pcic);
- load("ds");
- };
-
- #- run cardmgr in foreground while it is configuring the card.
- run_program::run("cardmgr", "-f", "-m" ,"/modules");
- sleep(3);
-
- #- make sure to be aware of loaded module by cardmgr.
- read_already_loaded();
-}
-
-sub write_pcmcia {
- my ($prefix, $pcmcia) = @_;
-
- #- should be set after installing the package above otherwise the file will be renamed.
- setVarsInSh("$prefix/etc/sysconfig/pcmcia", {
- PCMCIA => bool2yesno($pcmcia),
- PCIC => $pcmcia,
- PCIC_OPTS => "",
- CORE_OPTS => "",
- });
-}
-
-
-#-###############################################################################
-#- internal functions
-#-###############################################################################
-sub loaded_modules {
- map { /(\S+)/ } cat_("/proc/modules");
-}
-sub read_already_loaded {
- when_load($_) foreach reverse loaded_modules();
-}
-
-sub when_load {
- my ($name, @options) = @_;
- my $category = module2category($name);
-
- if ($category =~ m,disk/(scsi|hardware_raid|usb),) {
- add_probeall('scsi_hostadapter', $name);
- eval { load('sd_mod') };
- }
- add_alias('sound-slot-0', $name) if $category =~ /sound/;
- load('snd-pcm-oss') if $name =~ /^snd-/;
- add_probeall('usb-interface', $name) if $name =~ /usb-[uo]hci/ || $name eq 'ehci-hcd';
- $conf{$name}{options} = join " ", @options if @options;
-}
-
-sub cz_file {
- "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz-" . c::kernel_version();
-}
-
-sub extract_modules {
- my ($dir, @modules) = @_;
- my $cz = cz_file();
- if (!-e $cz) {
- unlink $_ foreach glob_("/lib/modules*.cz*");
- require install_any;
- install_any::getAndSaveFile("Mandrake/mdkinst$cz", $cz) or die "failed to get modules $cz: $!";
- }
- eval {
- require packdrake;
- my $packer = new packdrake($cz, quiet => 1);
- $packer->extract_archive($dir, map { "$_.o" } @modules);
- };
-}
-
-sub load_raw {
- my @l = @_;
-
- extract_modules('/tmp', map { $_->[0] } @l);
- my @failed = grep {
- my $m = "/tmp/$_->[0].o";
- if (-e $m && run_program::run(["/usr/bin/insmod_", "insmod"], '2>', '/dev/tty5', $m, @{$_->[1]})) {
- unlink $m;
- '';
- } else {
- log::l("missing module $_->[0]") if !-e $m;
- -e $m;
- }
- } @l;
-
- die "insmod'ing module " . join(", ", map { $_->[0] } @failed) . " failed" if @failed;
-
- foreach (@l) {
- if ($_->[0] =~ /usb-[uo]hci/) {
- eval {
- require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
- #- ensure keyboard is working, the kernel must do the job the BIOS was doing
- sleep 2;
- load("usbkbd", "keybdev") if detect_devices::usbKeyboards();
- }
- }
- }
-}
-
-
-
-1;
diff --git a/perl-install/mouse.pm b/perl-install/mouse.pm
deleted file mode 100644
index 1ff8c106b..000000000
--- a/perl-install/mouse.pm
+++ /dev/null
@@ -1,565 +0,0 @@
-package mouse; # $Id$
-
-#use diagnostics;
-#use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use detect_devices;
-use run_program;
-use devices;
-use modules;
-use any;
-use log;
-
-my @mouses_fields = qw(nbuttons MOUSETYPE XMOUSETYPE name);
-
-my %mice =
- arch() =~ /^sparc/ ?
-(
- 'sunmouse' =>
- [ [ 'sunmouse' ],
- [ [ 3, 'sun', 'sun', __("Sun - Mouse") ]
- ]]
-) :
-(
- 'PS/2' =>
- [ [ 'psaux' ],
- [ [ 2, 'ps/2', 'PS/2', __("Standard") ],
- [ 5, 'ps/2', 'MouseManPlusPS/2', __("Logitech MouseMan+") ],
- [ 5, 'imps2', 'IMPS/2', __("Generic PS2 Wheel Mouse") ],
- [ 5, 'ps/2', 'GlidePointPS/2', __("GlidePoint") ],
- '',
- [ 5, 'ps/2', 'ThinkingMousePS/2', __("Kensington Thinking Mouse") ],
- [ 5, 'netmouse', 'NetMousePS/2', __("Genius NetMouse") ],
- [ 5, 'netmouse', 'NetScrollPS/2', __("Genius NetScroll") ],
- ]],
-
- 'USB' =>
- [ [ 'usbmouse' ],
- [ if_(arch() eq 'ppc', [ 1, 'ps/2', 'PS/2', __("1 button") ]),
- [ 2, 'ps/2', 'PS/2', __("Generic 2 Button Mouse") ],
- [ 3, 'ps/2', 'PS/2', __("Generic") ],
- [ 5, 'ps/2', 'IMPS/2', __("Wheel") ],
- ]],
-
- __("serial") =>
- [ [ map { "ttyS$_" } 0..3 ],
- [ [ 2, 'Microsoft', 'Microsoft', __("Generic 2 Button Mouse") ],
- [ 3, 'Microsoft', 'Microsoft', __("Generic 3 Button Mouse") ],
- [ 5, 'ms3', 'IntelliMouse', __("Microsoft IntelliMouse") ],
- [ 3, 'MouseMan', 'MouseMan', __("Logitech MouseMan") ],
- [ 2, 'MouseSystems', 'MouseSystems', __("Mouse Systems") ],
- '',
- [ 3, 'logim', 'MouseMan', __("Logitech CC Series") ],
- [ 5, 'pnp', 'IntelliMouse', __("Logitech MouseMan+/FirstMouse+") ],
- [ 5, 'ms3', 'IntelliMouse', __("Genius NetMouse") ],
- [ 2, 'MMSeries', 'MMSeries', __("MM Series") ],
- [ 2, 'MMHitTab', 'MMHittab', __("MM HitTablet") ],
- [ 3, 'Logitech', 'Logitech', __("Logitech Mouse (serial, old C7 type)") ],
- [ 3, 'Microsoft', 'ThinkingMouse', __("Kensington Thinking Mouse") ],
- ]],
-
- __("busmouse") =>
- [ [ arch() eq 'ppc' ? 'adbmouse' : ('atibm', 'inportbm', 'logibm') ],
- [ if_(arch() eq 'ppc', [ 1, 'Busmouse', 'BusMouse', __("1 button") ]),
- [ 2, 'Busmouse', 'BusMouse', __("2 buttons") ],
- [ 3, 'Busmouse', 'BusMouse', __("3 buttons") ],
- ]],
-
- __("none") =>
- [ [ 'none' ],
- [ [ 0, 'none', 'Microsoft', __("No mouse") ],
- ]],
-);
-
-
-sub xmouse2xId {
- #- xmousetypes must be sorted as found in /usr/include/X11/extensions/xf86misc.h
- #- so that first mean "0", etc
- my @xmousetypes = (
- "Microsoft",
- "MouseSystems",
- "MMSeries",
- "Logitech",
- "BusMouse", #MouseMan,
- "Logitech",
- "PS/2",
- "MMHittab",
- "GlidePoint",
- "IntelliMouse",
- "ThinkingMouse",
- "IMPS/2",
- "ThinkingMousePS/2",
- "MouseManPlusPS/2",
- "GlidePointPS/2",
- "NetMousePS/2",
- "NetScrollPS/2",
- "SysMouse",
- "Auto",
- "AceCad",
- "WSMouse",
- "USB",
- );
- my ($id) = @_;
- $id = 'BusMouse' if $id eq 'MouseMan';
- my $i; map_index { $_ eq $id and $i = $::i } @xmousetypes; $i;
-}
-
-my %mouse_btn_keymap = (
- 0 => "NONE",
- 67 => "F9",
- 68 => "F10",
- 87 => "F11",
- 88 => "F12",
- 85 => "F13",
- 89 => "F14",
- 90 => "F15",
- 56 => "L-Option/Alt",
- 125 => "L-Command",
- 98 => "Num: /",
- 55 => "Num: *",
- 117 => "Num: =",
-);
-sub ppc_one_button_keys { keys %mouse_btn_keymap }
-sub ppc_one_button_key2text { $mouse_btn_keymap{$_[0]} }
-
-sub raw2mouse {
- my ($type, $raw) = @_;
- $raw or return;
-
- my %l; @l{@mouses_fields} = @$raw;
- +{ %l, type => $type };
-}
-
-sub update_type_name {
- my ($mouse) = @_;
- while (my ($k, $v) = each %mice) {
- $mouse->{device} =~ /usb/ && $k ne 'USB' and next; #- avoid mixing USB and PS/2 mice.
- foreach (@{$v->[1]}) {
- if ($_->[0] == $mouse->{nbuttons} && $_->[2] eq $mouse->{XMOUSETYPE}) {
- add2hash($mouse, { MOUSETYPE => $_->[1],
- type => $k,
- name => $_->[3],
- });
- return $mouse;
- }
- }
- }
-}
-
-sub fullnames {
- map_each {
- my $type = $::a;
- grep {$_} map {
- if ($_) {
- my $l = raw2mouse($type, $_);
- "$type|$l->{name}";
- } else {
- $type .= "|[" . _("Other") . "]";
- '';
- }
- } @{$::b->[1]}
- } %mice;
-}
-
-sub fullname2mouse {
- my ($fname, %opts) = @_;
- my ($type, @l) = split '\|', $fname;
- my ($name) = pop @l;
- search:
- $opts{device} ||= $mice{$type}[0][0];
- foreach (@{$mice{$type}[1]}) {
- my $l = raw2mouse($type, $_);
- $name eq $l->{name} and return { %$l, %opts };
- }
- if ($name eq '1 Button') {
- $name = "Generic 2 Button Mouse";
- goto search;
- }
- die "$fname not found ($type, $name)";
-}
-
-sub serial_ports() { map { "ttyS$_" } 0..7 }
-sub serial_port2text {
- $_[0] =~ /ttyS(\d+)/ ? "$_[0] / COM" . ($1 + 1) : $_[0];
-}
-
-sub read {
- my ($prefix) = @_;
- my %mouse = getVarsFromSh "$prefix/etc/sysconfig/mouse";
- eval { add2hash_(\%mouse, fullname2mouse($mouse{FULLNAME})) };
- $mouse{device} = readlink "$prefix/dev/mouse" or log::l("reading $prefix/dev/mouse symlink failed");
- $mouse{nbuttons} = $mouse{XEMU3} eq "yes" ? 2 : $mouse{WHEEL} eq "yes" ? 5 : 3;
- \%mouse;
-}
-
-sub write {
- my ($prefix, $mouse) = @_;
- local $mouse->{FULLNAME} = qq("$mouse->{type}|$mouse->{name}"); #-"
- local $mouse->{XEMU3} = bool2yesno($mouse->{nbuttons} < 3);
- local $mouse->{WHEEL} = bool2yesno($mouse->{nbuttons} > 3);
- setVarsInSh("$prefix/etc/sysconfig/mouse", $mouse, qw(MOUSETYPE XMOUSETYPE FULLNAME XEMU3 WHEEL device));
- any::devfssymlinkf ($mouse->{device}, 'mouse', $prefix) or log::l("creating $prefix/dev/mouse symlink failed");
- $mouse->{auxmouse} and any::devfssymlinkf ($mouse->{auxmouse}{device}, 'mouse1', $prefix) or log::l("creating $prefix/dev/mouse1 symlink failed");
-
- if (arch() =~ /ppc/) {
- my $s = join('',
- "dev.mac_hid.mouse_button_emulation = " . to_bool($mouse->{button2_key} || $mouse->{button3_key}) . "\n",
- if_($mouse->{button2_key}, "dev.mac_hid.mouse_button2_keycode = $mouse->{button2_key}\n"),
- if_($mouse->{button3_key}, "dev.mac_hid.mouse_button3_keycode = $mouse->{button3_key}\n"),
- );
- substInFile {
- $_ = '' if /^\Qdev.mac_hid.mouse_button/;
- $_ .= $s if eof;
- } "$prefix/etc/sysctl.conf";
- #- hack - dev RPM symlinks to mouse0 - lands on mouse1 with new input layer on PPC input/mice will get both ADB and USB
- symlinkf "/dev/input/mice", "$prefix/dev/usbmouse" if ($mouse->{device} eq "usbmouse");
- }
-}
-
-sub mouseconfig {
- my ($t, $mouse, @wacom);
-
- #- Whouah! probing all devices from ttyS0 to ttyS3 once a time!
- detect_devices::probeSerialDevices();
-
- #- check new probing methods keep everything used here intact!
- foreach (0..3) {
- $t = detect_devices::probeSerial("/dev/ttyS$_");
- if ($t->{CLASS} eq 'MOUSE') {
- $t->{MFG} ||= $t->{MANUFACTURER};
-
- $mouse = fullname2mouse("serial|Microsoft IntelliMouse") if $t->{MFG} eq 'MSH' && $t->{MODEL} eq '0001';
- $mouse = fullname2mouse("serial|Logitech MouseMan") if $t->{MFG} eq 'LGI' && $t->{MODEL} =~ /^80/;
- $mouse = fullname2mouse("serial|Genius NetMouse") if $t->{MFG} eq 'KYE' && $t->{MODEL} eq '0003';
-
- $mouse ||= fullname2mouse("serial|Generic 2 Button Mouse"); #- generic by default.
- $mouse->{device} = "ttyS$_";
- last;
- } elsif ($t->{CLASS} eq "PEN" || $t->{MANUFACTURER} eq "WAC") {
- push @wacom, "ttyS$_";
- }
- }
- $mouse, @wacom;
-}
-
-sub detect() {
- if (arch() =~ /^sparc/) {
- return fullname2mouse("sunmouse|Sun - Mouse");
- }
- if (arch() eq "ppc") {
- return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ?
- "USB|1 button" :
- # No need to search for an ADB mouse. If I did, the PPC kernel would
- # find one whether or not I had one installed! So.. default to it.
- "busmouse|1 button");
- }
-
- my @wacom;
- my $fast_mouse_probe = sub {
- my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1);
-
- if (modules::get_alias("usb-interface")) {
- if (my (@l) = detect_devices::usbMice()) {
- log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l;
- eval { modules::load(qw(hid mousedev usbmouse)) };
- if (!$@ && detect_devices::tryOpen("usbmouse")) {
- my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Generic");
- $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic).
- return $mouse;
- }
- eval { modules::unload(qw(usbmouse mousedev hid)) };
- }
- }
- $auxmouse;
- };
-
- if (modules::get_alias("usb-interface")) {
- my $keep_mouse;
- if (my (@l) = detect_devices::usbWacom()) {
- log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
- eval { modules::load("wacom", "evdev"); };
- unless ($@) {
- foreach (0..$#l) {
- detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_";
- }
- }
- $keep_mouse or eval { modules::unload("evdev", "wacom"); };
- }
- }
-
- #- at this level, not all possible mice are detected so avoid invoking serial_probe
- #- which takes a while for its probe.
- if ($::isStandalone) {
- my $mouse = $fast_mouse_probe->();
- $mouse and return ($mouse, @wacom);
- }
-
- #- probe serial device to make sure a wacom has been detected.
- eval { modules::load("serial") };
- my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom;
-
- if (!$::isStandalone) {
- my $mouse = $fast_mouse_probe->();
- $r && $mouse and $r->{auxmouse} = $mouse; #- we kept the auxilliary mouse as PS/2.
- $r and return ($r, @wacom);
- $mouse and return ($mouse, @wacom);
- } else {
- $r and return ($r, @wacom);
- }
-
- #- in case only a wacom has been found, assume an inexistant mouse (necessary).
- @wacom and return { CLASS => 'MOUSE',
- nbuttons => 2,
- device => "nothing",
- MOUSETYPE => "Microsoft",
- XMOUSETYPE => "Microsoft"}, @wacom;
-
- if (!modules::get_alias("usb-interface") && detect_devices::is_a_recent_computer() && $::isInstall && !$::noauto) {
- #- special case for non detected usb interface on a box with no mouse.
- #- we *must* find out if there really is no usb, otherwise the box may
- #- not be accessible via the keyboard (if the keyboard is USB)
- #- the only way to know this is to make a full pci probe
- modules::load_category('bus/usb', '', 'unsafe');
- if (my $mouse = $fast_mouse_probe->()) {
- return $mouse;
- }
- }
-
- #- defaults to generic serial mouse on ttyS0.
- #- Oops? using return let return a hash ref, if not using it, it return a list directly :-)
- return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1);
-}
-
-#- write_conf : write the mouse infos into the Xconfig files.
-#- input :
-#- $mouse : the hashtable containing the informations
-#- $mouse input
-#- $mouse->{nbuttons} : number of buttons : integer
-#- $mouse->{device} : device of the mouse : string : ex 'psaux'
-#- $mouse->{XMOUSETYPE} : type of the mouse for gpm : string : ex 'PS/2'
-#- $mouse->{type} : type (generic ?) of the mouse : string : ex 'PS/2'
-#- $mouse->{name} : name of the mouse : string : ex 'Standard'
-#- $mouse->{MOUSETYPE} : type of the mouse : string : ex "ps/2"
-#- $mouse->{XEMU3} : emulate 3rd button : string : 'yes' or 'no'
-sub write_conf {
- my ($mouse) = @_;
-
- &write('', $mouse);
- modules::write_conf('') if $mouse->{device} eq "usbmouse" && !$::testing;
-
- my $f = "/etc/X11/XF86Config";
- my $g = "/etc/X11/XF86Config-4";
-
- my $update_mouse = sub {
- my ($mouse) = @_;
-
- my ($zaxis, $zaxis_aux) = map { [
- $_->{nbuttons} > 3 ? [ "ZAxisMapping", "4 5" ] : (),
- $_->{nbuttons} > 5 ? [ "ZAxisMapping", "6 7" ] : (),
- $_->{nbuttons} < 3 ? ([ "Emulate3Buttons" ], [ "Emulate3Timeout", "50" ]) : ()
- ] } grep { $_ } ($mouse, $mouse->{auxmouse});
-
- my ($str_zaxis, $str_zaxis_aux) = map { join('', map { qq(\n $_->[0]) . ($_->[1] && qq( $_->[1])) } @$_)
- } grep { $_ } ($zaxis, $zaxis_aux);
- my $found_auxmouse = 0;
- substInFile {
- if (/^Section\s+"Pointer"/ .. /^EndSection/) {
- $_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
- s|^(\s*Protocol\s+).*|$1"$mouse->{XMOUSETYPE}"|;
- s|^(\s*Device\s+).*|$1"/dev/$mouse->{device}"$str_zaxis|;
- }
- if ($mouse->{auxmouse}) {
- if (/DeviceName\s+"Mouse2"/ .. /^EndSection/) {
- $found_auxmouse = 1;
- $_ = '' if /(ZAxisMapping|Emulate3|AlwaysCore)/; #- remove existing line
- s|^(\s*Protocol\s+).*|$1"$mouse->{auxmouse}{XMOUSETYPE}"|;
- s|^(\s*Device\s+).*|$1"/dev/$mouse->{auxmouse}{device}"\n AlwaysCore$str_zaxis_aux|;
- }
- }
- } $f if -e $f && !$::testing;
- substInFile {
- if (my $l = /^Section\s+"Pointer"/ .. /^EndSection/) {
- $l =~ /E/ and $_ .= qq(
-
-Section "XInput"
- SubSection "Mouse"
- DeviceName "Mouse2"
- Protocol "$mouse->{auxmouse}{XMOUSETYPE}"
- Device "/dev/$mouse->{auxmouse}{device}"
- AlwaysCore$str_zaxis_aux
- EndSubSection
-EndSection
-);
- }
- } $f if !$found_auxmouse && $mouse->{auxmouse} && -e $f && !$::testing;
-
- ($str_zaxis, $str_zaxis_aux) = map { join('', map { qq(\n Option "$_->[0]") . ($_->[1] && qq( "$_->[1]")) } @$_)
- } grep { $_ } ($zaxis, $zaxis_aux);
- $found_auxmouse = 0;
- substInFile {
- if (/Identifier\s+"Mouse1"/ .. /^EndSection/) {
- $_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
- s|^(\s*Option\s+"Protocol"\s+).*|$1"$mouse->{XMOUSETYPE}"|; #"
- s|^(\s*Option\s+"Device"\s+).*|$1"/dev/mouse"$str_zaxis|;
- }
- if ($mouse->{auxmouse}) {
- if (/Identifier\s+"Mouse2"/ .. /^EndSection/) {
- $found_auxmouse = 1;
- $_ = '' if /(ZAxisMapping|Emulate3)/; #- remove existing line
- s|^(\s*Option\s+"Protocol"\s+).*|$1"$mouse->{auxmouse}{XMOUSETYPE}"|; #"
- s|^(\s*Option\s+"Device"\s+).*|$1"/dev/$mouse->{auxmouse}{device}"$str_zaxis_aux|; #"
- }
- }
- } $g if -e $g && !$::testing;
- substInFile {
- if (my $l = /Identifier\s+"Mouse1"/ .. /^EndSection/) {
- $l =~ /E/ and $_ .= qq(
-
-Section "InputDevice"
- Identifier "Mouse2"
- Option "Protocol" "$mouse->{auxmouse}{XMOUSETYPE}"
- Option "Device" "/dev/$mouse->{auxmouse}{XMOUSETYPE}"$str_zaxis_aux
-EndSection
-);
- }
- } $g if !$found_auxmouse && $mouse->{auxmouse} && -e $g && !$::testing;
- };
- $update_mouse->($mouse);
-}
-
-sub test_mouse_install {
- my ($mouse) = @_;
- require my_gtk;
- my_gtk->import(qw(:wrappers :helpers));
- my $w = my_gtk->new;
- my ($width, $height, $offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25);
- my $darea = new Gtk::DrawingArea;
- $darea->set_events([ 'button_press_mask', 'button_release_mask' ]); #$darea must be unrealized.
- gtkadd($w->{window},
- gtkpack(my $vbox_grab = new Gtk::VBox(0,0),
- gtksize(gtkset_usize($darea, $width+1, $height+1), $width+1, $height+1),
- my $okcancel = gtkset_sensitive(create_okcancel($w, '', '', "edge"), 1)
- ),
- );
- $okcancel->set_uposition(7, $height-43);
- Gtk->timeout_add(2000, sub { gtkset_sensitive($okcancel, 1); $okcancel->draw(undef); });
- test_mouse($mouse, $w, $darea, $width, $height);
- $w->{window}->set_usize(undef, $height+10);
- $w->sync; # HACK
- Gtk::Gdk->pointer_grab($darea->window, 1,
- [ 'pointer_motion_mask'],
- $darea->window, undef ,0);
- $w->main;
-}
-
-sub test_mouse_standalone {
- my ($mouse, $hbox) = @_;
- require my_gtk;
- my_gtk->import(qw(:wrappers));
- my ($width, $height, $offset) = (210, round_up(min(350, $::windowheight - 150), 6), 25);
- my $darea = new Gtk::DrawingArea;
- $darea->set_events([ 'button_press_mask', 'button_release_mask' ]); #$darea must be unrealized.
- gtkpack($hbox,
- gtkpack(gtkset_border_width(new Gtk::VBox(0,10), 10),
- gtksize(gtkset_usize($darea, $width+1, $height+1), $width, $height)
- )
- );
- test_mouse($mouse, $hbox, $darea, $width, $height);
-}
-
-sub test_mouse {
- my ($mouse, $w, $darea, $width, $height) = @_;
-
- $darea->realize();
- my $wait = 0;
- my ($m3_image, $m3_mask) = gtkcreate_xpm('mouse_3b.xpm');
- my ($m3_imagep, $m3_maskp) = gtkcreate_xpm('mouse_3b+.xpm');
- my ($m3_left, $m3_left_mask) = gtkcreate_xpm('mouse_left.xpm');
- my ($m3_right, $m3_right_mask) = gtkcreate_xpm('mouse_right.xpm');
- my ($m3_middle, $m3_middle_mask) = gtkcreate_xpm('mouse_middle.xpm');
- my ($aru, $aru_mask) = gtkcreate_xpm('arrow_up.xpm');
- my ($ard, $ard_mask) = gtkcreate_xpm('arrow_down.xpm');
- my $image = $m3_image;
- $mouse->{nbuttons} > 3 and $image = $m3_imagep;
- my $draw_text = sub {
- my ($t, $y) = @_;
- my $font = $darea->style->font;
- my $w = $font->string_width($t);
- $darea->window->draw_string($font, $darea->style->black_gc, ($darea->allocation->[2]-$width)/2 + ($width - $w) / 2, ($darea->allocation->[3]-$height)/2 + $y, $t);
- };
- my $drawarea; $drawarea = sub { $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
- $image, 0, 0,
- ($darea->allocation->[2]-$width)/2, ($darea->allocation->[3]-$height)/2,
- 210, 350);
- $draw_text->(_("Please test the mouse"), $height - 120);
- $draw_text->(_("To activate the mouse,"), $height - 105) if $mouse->{XMOUSETYPE} eq 'IMPS/2';
- $draw_text->(_("MOVE YOUR WHEEL!"), $height - 90) if $mouse->{XMOUSETYPE} eq 'IMPS/2';
- return if $::isStandalone;
- $darea->window->draw_rectangle($darea->style->bg_gc('normal'), 1, 0, $height-65, $width, $height);
- };
-
- my $paintButton = sub {
- my ($nb, $pressed) = @_;
- my $x = 60 + $nb*33;
- $drawarea->();
- if ($nb == 0) {
- $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
- $m3_left, 0, 0,
- ($darea->allocation->[2]-$width)/2+31, ($darea->allocation->[3]-$height)/2 + 52,
- 59, 91);
- } elsif ($nb == 2) {
- $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
- $m3_right, 0, 0,
- ($darea->allocation->[2]-$width)/2+117, ($darea->allocation->[3]-$height)/2 + 52,
- 61, 91);
- } elsif ($nb == 1) {
- if ($mouse->{nbuttons} > 3) {
- $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
- $m3_middle, 0, 0,
- ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
- 13, 62);
- } else {
- $darea->window->draw_arc ( $darea->style->black_gc,
- 1, ($darea->allocation->[2]-$width)/2 + $x, ($darea->allocation->[3]-$height)/2 + 90, 20, 25,
- 0, 360*64);
- }
- } elsif ($nb == 3) {
- $wait=1;
- $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
- $aru, 0, 0,
- ($darea->allocation->[2]-$width)/2+102, ($darea->allocation->[3]-$height)/2 + 57,
- 6, 8);
- $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
- $m3_middle, 0, 0,
- ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
- 13, 62);
- Gtk->timeout_add(200, sub { $wait = 0 });
- } elsif ($nb == 4) {
- $wait=1;
- $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
- $ard, 0, 0,
- ($darea->allocation->[2]-$width)/2+102, ($darea->allocation->[3]-$height)/2 + 131,
- 6, 8);
- $darea->window->draw_pixmap ($darea->style->bg_gc('normal'),
- $m3_middle, 0, 0,
- ($darea->allocation->[2]-$width)/2+98, ($darea->allocation->[3]-$height)/2 + 67,
- 13, 62);
- Gtk->timeout_add(200, sub { $wait = 0 });
- }
- };
- $darea->signal_connect(button_press_event => sub {
- my $b = $_[1]{button};
- $paintButton->($b - 1);
- });
- $darea->signal_connect(button_release_event => sub {
- while ($wait) { my_gtk::flush() }
- $drawarea->()
- });
- $darea->signal_connect(expose_event => sub { $drawarea->() });
- $darea->size($width, $height);
-}
diff --git a/perl-install/my_gtk.pm b/perl-install/my_gtk.pm
deleted file mode 100644
index 0c777d519..000000000
--- a/perl-install/my_gtk.pm
+++ /dev/null
@@ -1,1323 +0,0 @@
-package my_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK $border);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
- helpers => [ qw(create_okcancel createScrolledWindow create_menu create_notebook create_packtable create_hbox create_vbox create_adjustment create_box_with_title create_treeitem) ],
- wrappers => [ qw(gtksignal_connect gtkradio gtkpack gtkpack_ gtkpack__ gtkpack2 gtkpack3 gtkpack2_ gtkpack2__ gtkpowerpack gtkset_editable gtksetstyle gtkset_text gtkcombo_setpopdown_strings gtkset_tip gtkappenditems gtkappend gtkset_shadow_type gtkset_layout gtkset_relief gtkadd gtkput gtktext_insert gtkset_usize gtksize gtkset_justify gtkset_active gtkset_sensitive gtkset_modal gtkset_border_width gtkmove gtkresize gtkshow gtkhide gtkdestroy gtkcolor gtkset_mousecursor gtkset_mousecursor_normal gtkset_mousecursor_wait gtkset_background gtkset_default_fontset gtkctree_children gtkxpm gtkpng create_pix_text get_text_coord fill_tiled gtkicons_labels_widget write_on_pixmap gtkcreate_xpm gtkcreate_png gtkbuttonset) ],
- ask => [ qw(ask_warn ask_okcancel ask_yesorno ask_from_entry) ],
-);
-$EXPORT_TAGS{all} = [ map { @$_ } values %EXPORT_TAGS ];
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-use Gtk;
-use Gtk::Gdk::ImlibImage;
-use c;
-use log;
-use common;
-
-my $forgetTime = 1000; #- in milli-seconds
-$border = 5;
-
-#-###############################################################################
-#- OO stuff
-#-###############################################################################
-sub new {
- my ($type, $title, %opts) = @_;
-
- Gtk->init;
- Gtk::Gdk::ImlibImage->init;
- Gtk->set_locale;
- my $o = bless { %opts }, $type;
- $o->_create_window($title);
- while (my $e = shift @tempory::objects) { $e->destroy }
- foreach (@interactive::objects) {
- $_->{rwindow}->set_modal(0) if $_->{rwindow}->can('set_modal');
- }
- push @interactive::objects, $o if !$opts{no_interactive_objects};
- $o->{rwindow}->set_position('center_always') if $::isStandalone;
- $o->{rwindow}->set_modal(1) if $my_gtk::grab || $o->{grab};
-
- if ($::isWizard && !$my_gtk::pop_it) {
- $o->{window} = new Gtk::VBox(0,0);
- $o->{window}->set_border_width($::Wizard_splash ? 0 : 10);
- $o->{rwindow} = $o->{window};
- if (!defined($::WizardWindow)) {
- $::WizardWindow = new Gtk::Window;
- $::WizardWindow->set_position('center_always');
- $::WizardWindow->signal_connect(delete_event => sub { die 'wizcancel'});
- $::WizardTable = new Gtk::Table(2, 2, 0);
- $::WizardWindow->add($::WizardTable);
- my $draw1 = new Gtk::DrawingArea;
- $draw1->set_usize(540,100);
- my $draw2 = new Gtk::DrawingArea;
- $draw2->set_usize(100,300);
- my ($im_up, $mask_up) = gtkcreate_png($::Wizard_pix_up || "wiz_default_up.png");
- my ($y1, $x1) = $im_up->get_size;
- my ($im_left, $mask_left) = gtkcreate_png($::Wizard_pix_left || "wiz_default_left.png");
- my ($y2, $x2) = $im_left->get_size;
- my $style = $draw1->style->copy();
- $style->font(Gtk::Gdk::Font->fontset_load("-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*"));
- my $w = $style->font->string_width($::Wizard_title);
- $draw1->signal_connect(expose_event => sub {
- my $i;
- for ($i=0;$i<(540/$y1);$i++) {
- $draw1->window->draw_pixmap ($draw1->style->bg_gc('normal'),
- $im_up, 0, 0, 0, $y1*$i,
- $x1 , $y1 );
- $draw1->window->draw_string(
- $style->font,
- $draw1->style->white_gc,
- 140+(380-$w)/2, 62,
- ($::Wizard_title) );
- }
- });
- $draw2->signal_connect(expose_event => sub {
- my $i;
- for ($i=0;$i<(300/$y2);$i++) {
- $draw2->window->draw_pixmap ($draw2->style->bg_gc('normal'),
- $im_left, 0, 0, 0, $y2*$i,
- $x2 , $y2 );
- }
- });
- $::WizardTable->attach($draw1, 0, 2, 0, 1, 'fill', 'fill', 0, 0);
- #- $::WizardTable->attach($draw2, 0, 1, 1, 2, 'fill', 'fill', 0, 0);
- $::WizardTable->set_usize(540,400);
- $::WizardWindow->show_all;
- flush();
- }
- $::WizardTable->attach($o->{window}, 0, 2, 1, 2, [-fill, -expand], [-fill, -expand], 0, 0);
- }
-
- if ($::isEmbedded && !$my_gtk::pop_it && !eval { $::Plug->child }) {
- $o->{window} = new Gtk::HBox(0,0);
- $o->{rwindow} = $o->{window};
- $::Plug ||= new Gtk::Plug ($::XID);
- $::Plug->show;
- flush();
- $::Plug->add($o->{window});
- }
- $::CCPID and kill "USR2", $::CCPID;
- $o;
-}
-sub main {
- my ($o, $completed, $canceled) = @_;
- gtkset_mousecursor_normal();
- my $timeout = Gtk->timeout_add(1000, sub { gtkset_mousecursor_normal(); 1 });
- my $b = before_leaving { Gtk->timeout_remove($timeout) };
- $o->{rwindow}->window->set_events(['key_press_mask', 'key_release_mask', 'exposure_mask']) if $o->{rwindow}->window;
- $o->show;
-
- do {
- local $::setstep = 1;
- Gtk->main;
- } while ($o->{retval} ? $completed && !$completed->() : $canceled && !$canceled->());
- $o->destroy;
- $o->{retval}
-}
-sub show($) {
- my ($o) = @_;
- $o->{window}->show;
- $o->{rwindow}->show;
-}
-sub destroy($) {
- my ($o) = @_;
- $o->{rwindow}->destroy;
- gtkset_mousecursor_wait();
- flush();
-}
-sub DESTROY { goto &destroy }
-sub sync {
- my ($o) = @_;
- show($o);
- flush();
-}
-sub flush {
- Gtk->main_iteration while Gtk->events_pending;
-}
-
-sub gtkshow($) { $_[0]->show; $_[0] }
-sub gtkhide($) { $_[0]->hide; $_[0] }
-sub gtkdestroy($) { $_[0] and $_[0]->destroy }
-sub gtkset_usize($$$) { $_[0]->set_usize($_[1],$_[2]); $_[0] }
-sub gtksize($$$) { $_[0]->size($_[1],$_[2]); $_[0] }
-sub gtkset_justify($$) { $_[0]->set_justify($_[1]); $_[0] }
-sub gtkset_active($$) { $_[0]->set_active($_[1]); $_[0] }
-sub gtkset_modal { $_[0]->set_modal($_[1]); $_[0] }
-sub gtkset_sensitive { $_[0]->set_sensitive($_[1]); $_[0] }
-sub gtkset_border_width{ $_[0]->set_border_width($_[1]); $_[0] }
-sub gtkmove { $_[0]->window->move($_[1], $_[2]); $_[0] }
-sub gtkresize { $_[0]->window->resize($_[1], $_[2]); $_[0] }
-
-sub gtksignal_connect($@) {
- my $w = shift;
- $w->signal_connect(@_);
- $w
-}
-
-sub gtkradio {
- my $def = shift;
- my $radio;
- map { $radio = new Gtk::RadioButton($_, $radio ? $radio : ());
- $radio->set_active($_ eq $def); $radio } @_;
-}
-
-sub gtkpack_($@) { gtkpowerpack('arg', 1, @_) }
-sub gtkpack($@) { gtkpowerpack(1, 1, @_) }
-sub gtkpack__($@) { gtkpowerpack(0, 1, @_) }
-sub gtkpack2_($@) { gtkpowerpack('arg', 0, @_) }
-sub gtkpack2($@) { gtkpowerpack(1, 0, @_) }
-sub gtkpack2__($@) { gtkpowerpack(0, 0, @_) }
-sub gtkpack3 { gtkpowerpack($a?1:0, 0, @_) }
-
-sub gtkpowerpack {
- #- Get Default Attributes (if any). 2 syntaxes allowed :
- #- gtkpowerpack( {expand => 1, fill => 0}, $box...) : the attributes are picked from a specified hash ref
- #- gtkpowerpack(1,0,1, $box, ...) : the attributes are picked from the non-ref list, in the order (expand, fill, padding, pack_end).
- my $RefDefaultAttrs;
- if (ref($_[0]) eq 'HASH') { $RefDefaultAttrs = shift }
- elsif (!ref($_[0])) {
- $RefDefaultAttrs = {};
- foreach ("expand", "fill", "padding", "pack_end") {
- !ref($_[0]) ? $RefDefaultAttrs->{$_} = shift : last
- }
- }
- my $box = shift;
-
- while (@_) {
- #- Get attributes (if specified). 4 syntaxes allowed (default values are undef ie. false...) :
- #- gtkpowerpack({defaultattrs}, $box, $widget1, $widget2, ...) : the attrs are picked from the default ones (if they exist)
- #- gtkpowerpack($box, {fill=>1, expand=>0, ...}, $widget1, ...) : the attributes are picked from a specified hash ref
- #- gtkpowerpack($box, [1,0,1], $widget1, ...) : the attributes are picked from the array ref : (expand, fill, padding, pack_end).
- #- gtkpowerpack({attr=>'arg'}, $box, 1, $widget1, 0, $widget2, etc...) : the 'arg' value will tell gtkpowerpack to always read the
- #- attr value directly in the arg list (avoiding confusion between value 0 and Gtk::Label("0"). That can simplify some writings but
- #- this arg(s) MUST then be present...
- my %attr;
- my $RefAttrs;
- ref($_[0]) eq 'HASH' || ref($_[0]) eq 'ARRAY' and $RefAttrs = shift;
- foreach ("expand", "fill", "padding", "pack_end") {
- if ($RefDefaultAttrs->{$_} eq 'arg') {
- ref ($_[0]) and die "error in packing definition\n";
- $attr{$_} = shift;
- ref($RefAttrs) eq 'ARRAY' and shift @$RefAttrs;
- } elsif (ref($RefAttrs) eq 'HASH' && defined($RefAttrs->{$_})) {
- $attr{$_} = $RefAttrs->{$_};
- } elsif (ref($RefAttrs) eq 'ARRAY') {
- $attr{$_} = shift @$RefAttrs;
- } elsif (defined($RefDefaultAttrs->{$_})) {
- $attr{$_} = int $RefDefaultAttrs->{$_};
- } else {
- $attr{$_} = 0;
- }
- }
- #- Get and pack the widget (create it if necessary when it is a label...)
- my $widget = ref($_[0]) ? shift : new Gtk::Label(shift);
- if ($attr{pack_end}) { $box->pack_end($widget, $attr{expand}, $attr{fill}, $attr{padding})}
- else { $box->pack_start($widget, $attr{expand}, $attr{fill}, $attr{padding}) }
- $widget->show;
- }
- $box
-}
-
-sub gtkset_editable {
- my ($w, $e) = @_;
- $w->set_editable($e);
- $w;
-}
-
-sub gtksetstyle {
- my ($w, $s) = @_;
- $w->set_style($s);
- $w;
-}
-
-sub gtkset_text {
- my ($w, $s) = @_;
- $w->set_text($s);
- $w;
-}
-
-sub gtkcombo_setpopdown_strings ($@) {
- my $w = shift;
- $w->set_popdown_strings(@_);
- $w;
-}
-
-sub gtkappend_text {
- my ($w, $s) = @_;
- $w->append_text($s);
- $w;
-}
-
-sub gtkprepend_text {
- my ($w, $s) = @_;
- $w->prepend_text($s);
- $w;
-}
-
-sub gtkset_tip {
- my ($tips, $w, $tip) = @_;
- $tips->set_tip($w, $tip) if $tip;
- $w;
-}
-
-sub gtkappenditems {
- my $w = shift;
- map {gtkshow($_) } @_;
- $w->append_items(@_);
- $w
-}
-
-sub gtkappend($@) {
- my $w = shift;
- foreach (@_) {
- my $l = $_;
- ref $l or $l = new Gtk::Label($l);
- $w->append($l);
- $l->show;
- }
- $w
-}
-
-sub gtkset_shadow_type {
- $_[0]->set_shadow_type($_[1]);
- $_[0];
-}
-
-sub gtkset_layout {
- $_[0]->set_layout($_[1]);
- $_[0];
-}
-
-sub gtkset_relief {
- $_[0]->set_relief($_[1]);
- $_[0];
-}
-
-sub gtkadd($@) {
- my $w = shift;
- foreach (@_) {
- my $l = $_;
- ref $l or $l = new Gtk::Label($l);
- $w->add($l);
- $l->show;
- }
- $w
-}
-sub gtkput {
- my ($w, $w2, $x, $y) = @_;
- $w->put($w2, $x, $y);
- $w2->show;
- $w
-}
-
-sub gtktext_insert {
- my ($w, $t) = @_;
- $w->freeze;
- $w->backward_delete($w->get_length);
- $w->insert(undef, undef, undef, $t);
- #- DEPRECATED? needs \n otherwise in case of one line text the beginning is not shown (even with the vadj->set_value)
- $w->set_word_wrap(1);
-#- $w->vadj->set_value(0);
- $w->thaw;
- $w;
-}
-
-sub gtkroot {
- Gtk->init;
- Gtk->set_locale;
- Gtk::Gdk::Window->new_foreign(Gtk::Gdk->ROOT_WINDOW);
-}
-
-sub gtkcolor {
- my ($r, $g, $b) = @_;
-
- my $color = bless { red => $r, green => $g, blue => $b }, 'Gtk::Gdk::Color';
- gtkroot()->get_colormap->color_alloc($color);
-}
-
-sub gtkset_mousecursor {
- my ($type, $w) = @_;
- ($w || gtkroot())->set_cursor(Gtk::Gdk::Cursor->new($type));
-}
-sub gtkset_mousecursor_normal { gtkset_mousecursor(68, @_) }
-sub gtkset_mousecursor_wait { gtkset_mousecursor(150, @_) }
-
-sub gtkset_background {
- my ($r, $g, $b) = @_;
-
- my $root = gtkroot();
- my $gc = Gtk::Gdk::GC->new($root);
-
- my $color = gtkcolor($r, $g, $b);
- $gc->set_foreground($color);
- $root->set_background($color);
-
- my ($h, $w) = $root->get_size;
- $root->draw_rectangle($gc, 1, 0, 0, $w, $h);
-}
-
-sub gtkset_default_fontset {
- my ($fontset) = @_;
-
- my $style = Gtk::Widget->get_default_style;
- my $f = Gtk::Gdk::Font->fontset_load($fontset) or die '';
- $style->font($f);
- Gtk::Widget->set_default_style($style);
-}
-
-sub gtkctree_children {
- my ($node) = @_;
- my @l;
- $node or return;
- for (my $p = $node->row->children; $p; $p = $p->row->sibling) {
- push @l, $p;
- }
- @l;
-}
-
-my @icon_paths = ($ENV{SHARE_PATH}, "$ENV{SHARE_PATH}/icons", "$ENV{SHARE_PATH}/libDrakX/pixmaps", "/usr/lib/libDrakX/icons", "pixmaps", 'standalone/icons');
-
-sub add_icon_path { @icon_paths = uniq(@icon_paths, @_) }
-
-sub gtkcreate_xpm {
- my ($f) = @_;
- my $rw = gtkroot();
- $f =~ m|.xpm$| or $f="$f.xpm";
- if ( $f !~ /\//) { -e "$_/$f" and $f="$_/$f", last foreach @icon_paths }
- my @l = Gtk::Gdk::Pixmap->create_from_xpm($rw, new Gtk::Style->bg('normal'), $f) or die "gtkcreate_xpm: missing pixmap file $f";
- @l;
-}
-
-sub gtkcreate_png {
- my ($f) = shift;
- $f =~ m|.png$| or $f="$f.png";
- if ( $f !~ /\//) { -e "$_/$f" and $f="$_/$f", last foreach @icon_paths }
- my $im = Gtk::Gdk::ImlibImage->load_image($f) or die "gtkcreate_png: missing png file $f";
- $im->render($im->rgb_width, $im->rgb_height);
- ($im->move_image(), $im->move_mask);
-}
-
-sub gtkbuttonset {
- my ($button, $str) = @_;
- $button->child->destroy;
- $button->add(gtkshow(new Gtk::Label $str));
- $button;
-}
-
-sub xpm_d { my $w = shift; Gtk::Gdk::Pixmap->create_from_xpm_d($w->window, undef, @_) }
-sub gtkxpm { new Gtk::Pixmap(gtkcreate_xpm(@_)) }
-sub gtkpng { new Gtk::Pixmap(gtkcreate_png(@_)) }
-
-sub create_pix_text {
- #ref widget, txt, color_txt, [font], [width], [height], flag1, flag2, [background, backsize x y], centeredx, centeredy, bold
- my ($w, $text, $color_text, $font, $max_width, $max_height, $can_be_greater, $can_be_smaller, $background, $x_back, $y_back, $centeredx, $centeredy, $bold) = @_;
- my $color_background;
- my $backpix;
- if ($color_text =~ /#(\d+)#(\d+)#(\d+)/) { $color_text = gtkcolor(map{$_*65535/255}($1, $2, $3)) }
- if (ref($background) eq 'Gtk::Gdk::Color') { $color_background = $background }
- elsif ($background =~ /#(\d+)#(\d+)#(\d+)/) { $color_background = gtkcolor(map{$_*65535/255}($1, $2, $3)) }
- elsif (ref($background) eq 'Gtk::Gdk::Pixmap' && $x_back && $y_back) { $backpix = 1 }
- my $fake_darea = new Gtk::DrawingArea;
- my $style= $fake_darea->style->copy();
- if (ref($font) eq 'Gtk::Gdk::Font') {
- $style->font($font);
- } else {
- $font and $style->font(Gtk::Gdk::Font->fontset_load($font));
- }
- $fake_darea->set_style($style);
- my ($width, $height, $lines, $widths, $heights) = get_text_coord (
- $text, $fake_darea, $max_width, $max_height, $can_be_greater, $can_be_smaller, $centeredx, $centeredy);
- my $pix = new Gtk::Gdk::Pixmap($w->window, $width, $height);
-
- if ($backpix) {
- fill_tiled($w, $pix, $background, $x_back, $y_back, $width, $height);
- } else {
- $color_background ||= gtkcolor(65535, 65535, 65535);
- my $gc_background = new Gtk::Gdk::GC($w->window);
- $gc_background->set_foreground($color_background);
- $pix->draw_rectangle($gc_background, 1, 0, 0, $width, $height);
- }
- $color_text ||= gtkcolor(0, 0, 0);
- my $gc_text = new Gtk::Gdk::GC($w->window);
- $gc_text->set_foreground($color_text);
- my $i = 0;
- foreach (@{$lines}) {
- $pix->draw_string($style->font, $gc_text, ${$widths}[$i], ${$heights}[$i], $_);
- $bold and $pix->draw_string($style->font, $gc_text, ${$widths}[$i] + 1, ${$heights}[$i], $_);
- $i++;
- }
- ($pix, $width, $height);
-}
-
-sub get_text_coord {
-
- my ($text, $widget4style, $max_width, $max_height, $can_be_greater, $can_be_smaller, $centeredx, $centeredy, $wrap_char) = @_;
-
- $wrap_char ||= ' ';
- my $idx = 0;
- my $real_width = 0;
- my $real_height = 0;
- my @lines;
- my @widths;
- my @heights;
- my $height_elem = $widget4style->style->font->ascent + $widget4style->style->font->descent;
- $heights[0] = 0;
- my $max_width2 = $max_width;
- my $height = $heights[0] = $height_elem;
- my $width = 0;
- my $flag = 1;
- my @t = split($wrap_char, $text);
- my @t2;
- if ($::isInstall && $::o->{lang} =~ /ja|zh/) {
- @t = map { $_ . $wrap_char } @t;
- $wrap_char = '';
- foreach (@t) {
- my @c = split('');
- my $i = 0;
- my $el = '';
- while (1) {
- $i >= @c and last;
- $el .= $c[$i];
- if (ord($c[$i]) >= 128) { $el .= $c[$i+1]; $i++; push @t2, $el; $el = ''}
- $i++;
- }
- $el ne '' and push @t2, $el;
- }
- } else {
- @t2 = @t;
- }
- foreach (@t2) {
- my $l = $widget4style->style->font->string_width($_ . (!$flag ? $wrap_char : ''));
- if ($width + $l > $max_width2 && !$flag) {
- $flag = 1;
- $height += $height_elem + 1;
- $heights[$idx+1] = $height;
- $widths[$idx] = $centeredx && !$can_be_smaller ? (max($max_width2-$width, 0))/2 : 0;
- $width = 0;
- $idx++;
- }
- $lines[$idx] = $flag ? "$_" : $lines[$idx] . $wrap_char . "$_";
- $width += $l;
- $flag = 0;
- $l <= $max_width2 or $max_width2 = $l;
- $width <= $real_width or $real_width = $width;
- }
- $height += $height_elem;
- $widths[$idx] = $centeredx && !$can_be_smaller ? (max($max_width2-$width, 0))/2 : 0;
-
- $height < $real_height or $real_height = $height;
- $width = $max_width;
- $height = $max_height;
- $real_width < $max_width && $can_be_smaller and $width = $real_width;
- $real_width > $max_width && $can_be_greater and $width = $real_width;
- $real_height < $max_height && $can_be_smaller and $height = $real_height;
- $real_height > $max_height && $can_be_greater and $height = $real_height;
- if ($centeredy) {
- my $dh = ($height-$real_height)/2 + ($height_elem)/2;
- @heights = map { $_ + $dh } @heights;
- }
- ($width, $height, \@lines, \@widths, \@heights)
-}
-
-sub fill_tiled {
- my ($w, $pix, $bitmap, $x_back, $y_back, $width, $height) = @_;
- my ($x2, $y2) = (0, 0);
- while (1) {
- $x2 = 0;
- while (1) {
- $pix->draw_pixmap($w->style->bg_gc('normal'),
- $bitmap, 0, 0, $x2, $y2, $x_back, $y_back);
- $x2 += $x_back;
- $x2 >= $width and last;
- }
- $y2 += $y_back;
- $y2 >= $height and last;
- }
-}
-
-sub gtkicons_labels_widget {
- my ($args, $w, $color_text, $widget_for_font, $background, $x_back, $y_back, $x_round,
- $y_round, $x_back2, $y_back2, $icon_width, $icon_height, $exec_func, $exec_hash) = @_;
-
- my @tab;
- my $i = 0;
- my $cursor_hand = new Gtk::Gdk::Cursor 60;
- my $cursor_normal = new Gtk::Gdk::Cursor 68;
- foreach (@$args) {
- my $label = $_->[0];
- my $dbl_area;
- my $darea = new Gtk::DrawingArea;
- my ($icon, undef) = gtkcreate_png($_->[1]);
- my ($icon_h, undef) = gtkcreate_png("$_->[1]_highlight");
- $darea->{state} = 0;
- $darea->signal_connect(expose_event => sub {
- my ($dx, $dy) = ($darea->allocation->[2], $darea->allocation->[3]);
- if (!defined($dbl_area) || $darea->{state} != $dbl_area->{state}) {
- my $state = $darea->{state};
- my ($pix, $width, $height) = create_pix_text($darea, $label, $color_text, $widget_for_font->style->font, $x_round, 1,
- 1, 0, $background, $x_back2, $y_back2, 1, 0, $state);
- ($dx, $dy) = (max($width, $x_round), $y_round + $height);
- $darea->set_usize($dx, $dy);
- $dbl_area = new Gtk::Gdk::Pixmap($darea->window, max($width, $x_round), $y_round + $height);
- $dbl_area->{state} = $darea->{state};
- fill_tiled($darea, $dbl_area, $background, $x_back2, $y_back2, $dx, $dy);
- $dbl_area->draw_pixmap($darea->style->bg_gc('normal'),
- $darea->{state} ? $icon_h : $icon, 0, 0, ($dx - $icon_width)/2, 0, $icon_width, $icon_height);
- $dbl_area->draw_pixmap($darea->style->bg_gc('normal'),
- $pix, 0, 0, ($dx - $width)/2, $y_round, $width, $height);
-# $dbl_area->draw_rectangle($darea->style->black_gc, 0,
-# 0, 0, max($width, $x_round) - 1 , $y_round + $height - 1);
- }
- $darea->window->draw_pixmap($darea->style->bg_gc('normal'),
- $dbl_area, 0, 0, 0, 0, $dx, $dy);
-# $darea->window->draw_rectangle($darea->style->black_gc, 0,
-# 0, 0, $dx, $dy);
- ($darea->{dx}, $darea->{dy}) = ($dx, $dy);
- });
- $darea->set_events(['exposure_mask', 'enter_notify_mask', 'leave_notify_mask', 'button_press_mask', 'button_release_mask' ]);
- $darea->signal_connect( enter_notify_event => sub {
- if ($darea->{state} == 0) {
- $darea->{state} = 1;
- $darea->draw(undef);
- }
- });
- $darea->signal_connect( leave_notify_event => sub {
- if ($darea->{state} == 1) {
- $darea->{state} = 0;
- $darea->draw(undef);
- }
- });
- my $label_exec = $_->[0];
- $darea->signal_connect( button_release_event => sub {
- $darea->{state} = 0;
- $darea->draw(undef);
- $exec_func->($exec_hash->{$label_exec});
-# $exec_hash->{$label_exec}{function}->($exec_hash->{$label_exec}{arg});
- });
- $darea->signal_connect( realize => sub { $darea->window->set_cursor($cursor_hand) });
- $tab[$i] = $darea;
- $i++;
- }
- my $fixed = new Gtk::Fixed;
- foreach (@tab) { $fixed->put($_, 75, 65) }
- my $redraw_function = sub {
- $fixed->move(@$_) foreach compute_icons($fixed->allocation->[2], $fixed->allocation->[3], 40, 15, 20, @tab);
- };
- $fixed->signal_connect(expose_event => $redraw_function );
- $fixed->signal_connect(realize => sub {
- $fixed->window->set_back_pixmap($background, 0);
- $redraw_function->();
- });
- $fixed->{redraw_function} = $redraw_function;
- $fixed->show_all();
- my $w_ret = createScrolledWindow($fixed, ['automatic', 'automatic']);
-
- #- Ugly hacks, don't touch! ########
- my $timeout2 = Gtk->timeout_add(100, sub { $fixed->set_usize($w_ret->allocation->[2] - 22, 0); 0; });
- $w_ret->vscrollbar->set_usize(19, undef);
- gtkset_border_width($w_ret, -2); #- ok, this is very very ugly...
-}
-
-sub ctree_set_icon {
- my ($tree, $node, $icon_pixmap, $icon_mask) = @_;
-
- my ($text, $spacing, undef, undef, undef, undef, $isleaf, $expanded) = $tree->get_node_info($node);
- $tree->set_node_info($node, $text, $spacing, $icon_pixmap, $icon_mask, $icon_pixmap, $icon_mask, $isleaf, $expanded);
-}
-
-sub compute_icons {
- my ($fx, $fy, $decx, $decy, $interstice, @tab) = @_;
- my $nb = $#tab;
- my $nb_sav = $nb;
- my $index = 0;
- my @dx2;
- my @dx;
- my @dy;
- my $line_up = 0;
- bcl_init:
- @dx2 = undef;
- bcl:
- @dx = map{ $_->{dx} } @tab[$index..$index+$nb];
- $dy[$index] = max(map{ $_->{dy} } @tab[$index..$index+$nb]);
- foreach (0..$#dx) {
- if ($dx[$_] > $dx2[$_]) { $dx2[$_] = $dx[$_] } else { $dx[$_] = $dx2[$_] }
- }
- my $line_size = 0;
- $line_size = $decx + sum(@dx2) + $nb * $interstice;
- if ($line_size > $fx) {
- $index = 0; $nb--; goto bcl_init;
- }
- $nb and $line_up = ($fx-$line_size)/($nb+2);
- $index += $nb+1;
- $index <= $#tab and goto bcl;
- my @ret;
- my $n = 0;
- my $y = $decy;
- my $x = $decx/2 + $line_up;
- foreach (0..$nb_sav) {
- $ret[$_] = [$tab[$_], $x, $y];
- $x += $dx2[$n] + $interstice + $line_up;
- $n++;
- if ($n > $nb) {
- $n = 0;
- $x = $decx/2 + $line_up;
- $y += int($dy[$_-$nb]/5)*5 + 15;
- }
- }
- @ret;
-}
-
-sub write_on_pixmap {
- my ($pixmap, $x_pos, $y_pos, @text)=@_;
- my ($gdkpixmap, $gdkmask) = $pixmap->get();
- my ($width, $height) = (440, 250);
- my $gc = Gtk::Gdk::GC->new(gtkroot());
- $gc->set_foreground(gtkcolor(8448, 17664, 40191)); #- in hex : 33, 69, 157
-
- my $darea= new Gtk::DrawingArea();
- $darea->size($width, $height);
- $darea->set_usize($width, $height);
- my $draw = sub {
- my $style = new Gtk::Style;
- #- i18n : you can change the font.
- $style->font(Gtk::Gdk::Font->fontset_load(_("-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*")));
- my $y_pos2= $y_pos;
- foreach (@text) {
- $darea->window->draw_string($style->font, $gc, $x_pos, $y_pos2, $_);
- $y_pos2 += 20;
- }
- };
- $darea->signal_connect(expose_event => sub { $darea->window->draw_rectangle($darea->style->white_gc, 1, 0, 0, $width, $height);
- $darea->window->draw_pixmap
- ($darea->style->white_gc,
- $gdkpixmap, 0, 0,
- ($darea->allocation->[2]-$width)/2, ($darea->allocation->[3]-$height)/2,
- $width, $height);
- &$draw();
- });
- $darea;
-}
-
-sub n_line_size {
- my ($nbline, $type, $widget) = @_;
- my $font = $widget->style->font;
- my $spacing = ${{ text => 0, various => 17 }}{$type};
- $nbline * ($font->ascent + $font->descent + $spacing) + 8;
-}
-
-#-###############################################################################
-#- createXXX functions
-
-#- these functions return a widget
-#-###############################################################################
-
-sub create_okcancel {
- my ($w, $ok, $cancel, $spread, @other) = @_;
- my $one = ($ok xor $cancel);
- $spread ||= $::isWizard ? "end" : "spread";
- $ok ||= $::isWizard ? ($::Wizard_finished ? _("Finish") : _("Next ->")) : _("Ok");
- $cancel ||= $::isWizard ? _("<- Previous") : _("Cancel");
- my $b1 = gtksignal_connect($w->{ok} = new Gtk::Button($ok), clicked => $w->{ok_clicked} || sub { $w->{retval} = 1; Gtk->main_quit });
- my $b2 = !$one && gtksignal_connect($w->{cancel} = new Gtk::Button($cancel), clicked => $w->{cancel_clicked} || sub { log::l("default cancel_clicked"); undef $w->{retval}; Gtk->main_quit });
- $::isWizard and gtksignal_connect($w->{wizcancel} = new Gtk::Button(_("Cancel")), clicked => sub { die 'wizcancel' });
- my @l = grep { $_ } $::isWizard ? ($w->{wizcancel}, $::Wizard_no_previous ? () : $b2, $b1): ($b1, $b2);
- push @l, map { gtksignal_connect(new Gtk::Button($_->[0]), clicked => $_->[1]) } @other;
-
- $_->can_default($::isWizard) foreach @l;
- gtkadd(create_hbox($spread), @l);
-}
-
-sub create_box_with_title($@) {
- my $o = shift;
-
- my $nbline = sum(map { round(length($_) / 60 + 1/2) } map { split "\n" } @_);
- $o->{box} = new Gtk::VBox(0,0);
- $o->{box_size} = n_line_size($nbline, 'text', $o->{box});
- if (@_ <= 2 && $nbline > 4) {
- $o->{icon} && !$::isWizard and
- eval { gtkpack__($o->{box}, gtkset_border_width(gtkpack_(new Gtk::HBox(0,0), 1, gtkpng($o->{icon})),5)) };
- my $wanted = $o->{box_size};
- $o->{box_size} = min(200, $o->{box_size});
- my $has_scroll = $o->{box_size} < $wanted;
-
- my $wtext = new Gtk::Text;
- $wtext->can_focus($has_scroll);
- chomp(my $text = join("\n", @_));
- my $scroll = createScrolledWindow(gtktext_insert($wtext, $text));
- $scroll->set_usize(400, $o->{box_size});
- gtkpack__($o->{box}, $scroll);
- } else {
- my $a = !$::no_separator;
- undef $::no_separator;
- if ($o->{icon} && !$::isWizard) {
- gtkpack__($o->{box},
- gtkpack_(new Gtk::HBox(0,0),
- 0, gtkset_usize(new Gtk::VBox(0,0), 15, 0),
- 0, eval { gtkpng($o->{icon}) },
- 0, gtkset_usize(new Gtk::VBox(0,0), 15, 0),
- 1, gtkpack_($o->{box_title} = new Gtk::VBox(0,0),
- 1, new Gtk::HBox(0,0),
- (map {
- my $w = ref $_ ? $_ : new Gtk::Label($_);
- $::isWizard and $w->set_justify("left");
- $w->set_name("Title");
- (0, $w);
- } map { ref $_ ? $_ : warp_text($_) } @_),
- 1, new Gtk::HBox(0,0),
- )
- ),
- if_($a, new Gtk::HSeparator)
- )
- } else {
- gtkpack__($o->{box},
- (map {
- my $w = ref $_ ? $_ : new Gtk::Label($_);
- $::isWizard and $w->set_justify("left");
- $w->set_name("Title");
- $w;
- } map { ref $_ ? $_ : warp_text($_) } @_),
- if_($a, new Gtk::HSeparator)
- )
- }
- }
-}
-
-sub createScrolledWindow {
- my ($W, $policy) = @_;
- my $w = new Gtk::ScrolledWindow(undef, undef);
- $policy ||= [ 'automatic', 'automatic'];
- $w->set_policy(@{$policy});
- member(ref $W, qw(Gtk::CList Gtk::CTree Gtk::Text)) ?
- $w->add($W) :
- $w->add_with_viewport($W);
- $W->can("set_focus_vadjustment") and $W->set_focus_vadjustment($w->get_vadjustment);
- $W->show;
- $w
-}
-
-sub create_menu($@) {
- my $title = shift;
- my $w = new Gtk::MenuItem($title);
- $w->set_submenu(gtkshow(gtkappend(new Gtk::Menu, @_)));
- $w
-}
-
-sub add2notebook {
- my ($n, $title, $book) = @_;
-
- my ($w1, $w2) = map { new Gtk::Label($_) } $title, $title;
- $book->{widget_title} = $w1;
- $n->append_page_menu($book, $w1, $w2);
- $book->show;
- $w1->show;
- $w2->show;
-}
-
-sub create_notebook(@) {
- my $n = new Gtk::Notebook;
- add2notebook($n, splice(@_, 0, 2)) while @_;
- $n
-}
-
-sub create_adjustment($$$) {
- my ($val, $min, $max) = @_;
- new Gtk::Adjustment($val, $min, $max + 1, 1, ($max - $min + 1) / 10, 1);
-}
-
-sub create_packtable($@) {
- my ($options, @l) = @_;
- my $w = new Gtk::Table(0, 0, $options->{homogeneous} || 0);
- map_index {
- my ($i, $l) = ($_[0], $_);
- map_index {
- my ($j) = @_;
- if ($_) {
- ref $_ or $_ = new Gtk::Label($_);
- $j != $#$l ?
- $w->attach($_, $j, $j + 1, $i, $i + 1, 'fill', 'fill', 5, 0) :
- $w->attach($_, $j, $j + 1, $i, $i + 1, 1|4, ref($_) eq 'Gtk::ScrolledWindow' ? 1|4 : 0, 0, 0);
- $_->show;
- }
- } @$l;
- } @l;
- $w->set_col_spacings($options->{col_spacings} || 0);
- $w->set_row_spacings($options->{row_spacings} || 0);
- $w
-}
-
-sub create_hbox {
- my $w = gtkset_border_width(new Gtk::HButtonBox, 3);
- $w->set_layout($_[0] || "spread");
- $w;
-}
-sub create_vbox {
- my $w = new Gtk::VButtonBox;
- $w->set_layout(-spread);
- $w;
-}
-
-
-sub _create_window($$) {
- my ($o, $title) = @_;
- my $w = new Gtk::Window;
- my $gc = Gtk::Gdk::GC->new(gtkroot());
- !$::isStandalone && !$::live && !$::g_auto_install and $my_gtk::shape_width = 3;
-#- $gc->set_foreground(gtkcolor(8448, 17664, 40191)); #- in hex : 33, 69, 157
- $gc->set_foreground(gtkcolor(5120, 10752, 22784)); #- in hex : 20, 42, 89
-#- $gc->set_foreground(gtkcolor(16896, 16896, 16896)); #- in hex : 66, 66, 66
- my $inner = gtkadd(my $f_ = gtkset_shadow_type(new Gtk::Frame(undef), 'out'),
- my $f = gtkset_border_width(gtkset_shadow_type(new Gtk::Frame(undef), 'none'), 3)
- );
- my $table;
- if ($::isStandalone || $::live || $::g_auto_install || $::noShadow) { gtkadd($w, $inner) } else {
- my $sqw = $my_gtk::shape_width;
- gtkadd($w, $table = new Gtk::Table(2, 2, 0));
- $table->attach( $inner, 0, 1, 0, 1, 1|4, 1|4, 0, 0);
- $table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, $sqw, 1), expose_event => sub {
- $_[0]->window->draw_rectangle($_[0]->style->bg_gc('normal'), 1, 0, 0, $sqw, $sqw);
- $_[0]->window->draw_rectangle($gc, 1, 0, $sqw, $sqw, $_[0]->allocation->[3]);
- }),
- 1, 2, 0, 1, 'fill', 'fill', 0, 0);
- $table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, 1, $sqw), expose_event => sub {
- $_[0]->window->draw_rectangle($_[0]->style->bg_gc('normal'), 1, 0, 0, $sqw, $sqw);
- $_[0]->window->draw_rectangle($gc, 1, $sqw, 0, $_[0]->allocation->[2], $sqw);
- }),
- 0, 1, 1, 2, 'fill', 'fill', 0, 0);
- $table->attach( gtksignal_connect(gtkset_usize(new Gtk::DrawingArea, $sqw, $sqw), expose_event => sub {
- $_[0]->window->draw_rectangle($gc, 1, 0, 0, $sqw, $sqw);
- }),
- 1, 2, 1, 2, 'fill', 'fill', 0, 0);
- $table->show_all;
- }
- $w->set_name("Title");
- $w->set_title($title);
-
- $w->signal_connect(expose_event => sub { eval { $interactive::objects[-1]{rwindow} == $w and $w->window->XSetInputFocus } }) if $my_gtk::force_focus || $o->{force_focus};
- $w->signal_connect(delete_event => sub { $w->destroy; die 'wizcancel' });
- $w->set_uposition(@{$my_gtk::force_position || $o->{force_position}}) if $my_gtk::force_position || $o->{force_position};
-
- my $focusing;
- $w->signal_connect(focus => sub {
- return 1 if $focusing;
- $focusing = 1;
- Gtk->idle_add(sub { $w->ensure_focus($_[0]); $focusing = 0; 0 }, $_[1]);
- }) if $w->can('ensure_focus');
-
- if ($::o->{mouse}{unsafe}) {
- $w->set_events("pointer_motion_mask");
- my $signal;
- $signal = $w->signal_connect(motion_notify_event => sub {
- delete $::o->{mouse}{unsafe};
- log::l("unsetting unsafe mouse");
- $w->signal_disconnect($signal);
- });
- }
- $w->signal_connect(key_press_event => sub {
- my $d = ${{ 0xffbe => 'help',
- 0xffbf => 'screenshot',
- 0xffc9 => 'next',
- 0xffc8 => 'previous' }}{$_[1]{keyval}};
-
- if ($d eq "help") {
- require install_gtk;
- install_gtk::create_big_help($::o);
- } elsif ($::isInstall && $d eq 'screenshot') {
- common::take_screenshot($o);
- } elsif (chr($_[1]{keyval}) eq 'e' && $_[1]{state} & 8) {
- log::l("Switching to " . ($::expert ? "beginner" : "expert"));
- $::expert = !$::expert;
- } elsif ($d) {
- #- previous field is created here :(
- my $s; foreach (reverse @{$::o->{orderedSteps}}) {
- $s->{previous} = $_ if $s;
- $s = $::o->{steps}{$_};
- }
- $s = $::o->{step};
- do { $s = $::o->{steps}{$s}{$d} } until !$s || $::o->{steps}{$s}{reachable};
- $::setstep && $s and die "setstep $s\n";
- }
- });# if $::isInstall;
-
- $w->signal_connect(size_allocate => sub {
- my ($wi, $he) = @{$_[1]}[2,3];
- my ($X, $Y, $Wi, $He) = @{$my_gtk::force_center || $o->{force_center}};
- $w->set_uposition(max(0, $X + ($Wi - $wi) / 2), max(0, $Y + ($He - $he) / 2));
-
- if (!$::isStandalone && !$::live && !$::g_auto_install && !$::noShadow) {
- my $sqw = $my_gtk::shape_width; #square width
- my $wia = int(($wi+7)/8);
- my $s = "\xFF" x ($wia*$he);
- my $wib = $wia*8;
- my $dif = $wib-$wi;
- foreach my $y (0..$sqw-1) { vec($s, $wib-1-$dif-$_+$wib*$y, 1) = 0x0 foreach (0..$sqw-1) }
- foreach my $y (0..$sqw-1) { vec($s, (($he-1)*$wib)-$wib*$y+$_, 1) = 0x0 foreach (0..$sqw-1) }
- $w->realize;
- my $b = Gtk::Gdk::Bitmap->create_from_data($w->window, $s, $wib, $he);
- $w->window->shape_combine_mask($b, 0, 0);
- }
- }) if ($my_gtk::force_center || $o->{force_center}) && !($my_gtk::force_position || $o->{force_position}) ;
-
- $o->{window} = $f;
- $o->{rwindow} = $w;
- $table and $table->draw(undef);
-}
-
-my ($next_child, $left, $right, $up, $down);
-{
- my $next_child = sub {
- my ($c, $dir) = @_;
-
- my @childs = $c->parent->children;
-
- my $i; for ($i = 0; $i < @childs; $i++) {
- last if $childs[$i] == $c || $childs[$i]->subtree == $c;
- }
- $i += $dir;
- 0 <= $i && $i < @childs ? $childs[$i] : undef;
- };
- $left = sub { &$next_child($_[0]->parent, 0); };
- $right = sub {
- my ($c) = @_;
- if ($c->subtree) {
- $c->expand;
- ($c->subtree->children)[0];
- } else {
- $c;
- }
- };
- $down = sub {
- my ($c) = @_;
- return &$right($c) if ref $c eq "Gtk::TreeItem" && $c->subtree && $c->expanded;
-
- if (my $n = &$next_child($c, 1)) {
- $n;
- } else {
- return if ref $c->parent ne 'Gtk::Tree';
- &$down($c->parent);
- }
- };
- $up = sub {
- my ($c) = @_;
- if (my $n = &$next_child($c, -1)) {
- $n = ($n->subtree->children)[-1] while ref $n eq "Gtk::TreeItem" && $n->subtree && $n->expanded;
- $n;
- } else {
- return if ref $c->parent ne 'Gtk::Tree';
- &$left($c);
- }
- };
-}
-
-sub create_treeitem($) {
- my ($name) = @_;
-
- my $w = new Gtk::TreeItem($name);
- $w->signal_connect(key_press_event => sub {
- my (undef, $e) = @_;
- local $_ = chr ($e->{keyval});
-
- if ($e->{keyval} > 0x100) {
- my $n;
- $n = &$left($w) if /[Q´\x96]/;
- $n = &$right($w) if /[Sś\x98]/;
- $n = &$up($w) if /[R¸\x97]/;
- $n = &$down($w) if /[T˛\x99]/;
- if ($n) {
- $n->focus('up');
- $w->signal_emit_stop("key_press_event");
- }
- $w->expand if /[+Ť]/;
- $w->collapse if /[-\xad]/;
- do {
- $w->expanded ? $w->collapse : $w->expand;
- $w->signal_emit_stop("key_press_event");
- } if /[\r\x8d]/;
- }
- 1;
- });
- $w;
-}
-
-
-
-#-###############################################################################
-#- ask_XXX
-
-#- just give a title and some args, and it will return the value given by the user
-#-###############################################################################
-
-sub ask_warn { my $w = my_gtk->new(shift @_); $w->_ask_warn(@_); main($w); }
-sub ask_yesorno { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Yes"), _("No")); main($w); }
-sub ask_okcancel { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Is this correct?"), _("Ok"), _("Cancel")); main($w); }
-sub ask_from_entry { my $w = my_gtk->new(shift @_); $w->_ask_from_entry(@_); main($w); }
-
-sub _ask_from_entry($$@) {
- my ($o, @msgs) = @_;
- my $entry = new Gtk::Entry;
- my $f = sub { $o->{retval} = $entry->get_text; Gtk->main_quit };
- $o->{ok_clicked} = $f;
- $o->{cancel_clicked} = sub { undef $o->{retval}; Gtk->main_quit };
-
- gtkadd($o->{window},
- gtkpack($o->create_box_with_title(@msgs),
- gtksignal_connect($entry, 'activate' => $f),
- ($o->{hide_buttons} ? () : create_okcancel($o))),
- );
- $entry->grab_focus;
-}
-
-sub _ask_warn($@) {
- my ($o, @msgs) = @_;
- gtkadd($o->{window},
- gtkpack($o->create_box_with_title(@msgs),
- gtksignal_connect(my $w = new Gtk::Button(_("Ok")), "clicked" => sub { Gtk->main_quit }),
- ),
- );
- $w->grab_focus;
-}
-
-sub _ask_okcancel($@) {
- my ($o, @msgs) = @_;
- my ($ok, $cancel) = splice @msgs, -2;
-
- gtkadd($o->{window},
- gtkpack(create_box_with_title($o, @msgs),
- create_okcancel($o, $ok, $cancel),
- )
- );
- $o->{ok}->grab_focus;
-}
-
-
-sub _ask_file {
- my ($o, $title, $path) = @_;
- my $f = $o->{rwindow} = new Gtk::FileSelection $title;
- $f->set_filename($path);
- $f->ok_button->signal_connect(clicked => sub { $o->{retval} = $f->get_filename ; Gtk->main_quit });
- $f->cancel_button->signal_connect(clicked => sub { Gtk->main_quit });
- $f->hide_fileop_buttons;
-}
-
-sub ask_browse_tree_info {
- my ($common) = @_;
-
- my $w = my_gtk->new($common->{title});
- my $tree = Gtk::CTree->new(3, 0);
- $tree->set_selection_mode('browse');
- $tree->set_column_auto_resize($_, 1) foreach 1..2;
- $tree->set_column_width(0, 200);
-
- gtkadd($w->{window},
- gtkpack_(new Gtk::VBox(0,5),
- 0, $common->{message},
- 1, gtkpack(new Gtk::HBox(0,0),
- createScrolledWindow($tree),
- gtkadd(gtkset_usize(new Gtk::Frame(_("Info")), $::windowwidth - 490, 0),
- createScrolledWindow(my $info = new Gtk::Text),
- )),
- 0, my $l = new Gtk::HBox(0,15),
- 0, gtkpack(new Gtk::HBox(0,10),
- my $go = gtksignal_connect(new Gtk::Button($common->{ok}), "clicked" => sub { $w->{retval} = 1; Gtk->main_quit }),
- $common->{cancel} ? (gtksignal_connect(new Gtk::Button($common->{cancel}), "clicked" => sub { $w->{retval} = 0; Gtk->main_quit })) : (),
- )
- ));
- gtkpack__($l, my $toolbar = new Gtk::Toolbar('horizontal', 'icons'));
-
- if ($common->{auto_deps}) {
- gtkpack__($l, gtksignal_connect(gtkset_active(new Gtk::CheckButton($common->{auto_deps}), $common->{state}{auto_deps}),
- clicked => sub { invbool \$common->{state}{auto_deps} }));
- }
- $l->pack_end(my $status = new Gtk::Label, 0, 1, 20);
-
- $w->{window}->set_usize(map { $_ - 2 * $my_gtk::border - 4 } $::windowwidth, $::windowheight);
- $go->grab_focus;
- $w->{rwindow}->show_all;
-
- my @toolbar = (ftout => [ _("Expand Tree") , sub { $tree->expand_recursive(undef) } ],
- ftin => [ _("Collapse Tree") , sub { $tree->collapse_recursive(undef) } ],
- reload => [ _("Toggle between flat and group sorted"), sub { invbool(\$common->{state}{flat}); $common->{rebuild_tree}->() } ]);
- foreach my $ic (@{$common->{icons} || []}) {
- push @toolbar, ( $ic->{icon} => [ $ic->{help}, sub {
- if ($ic->{code}) {
- my $w = $ic->{wait_message} && $common->{wait_message}->('', $ic->{wait_message});
- $ic->{code}();
- $common->{rebuild_tree}->();
- }
- } ]);
- }
- my %toolbar = @toolbar;
- $toolbar->set_button_relief("none");
- foreach (grep_index { $::i % 2 == 0 } @toolbar) {
- gtksignal_connect($toolbar->append_item(undef, $toolbar{$_}[0], undef, gtkpng("$ENV{SHARE_PATH}/$_.png")),
- clicked => $toolbar{$_}[1]);
- }
- $toolbar->set_style("icons");
-
- my $widgets = { w => $w, tree => $tree, info => $info, status => $status};
- ask_browse_tree_info_given_widgets($common, $widgets);
-}
-
-sub ask_browse_tree_info_given_widgets {
- my ($common, $w) = @_;
- my ($curr, $parent, $prev_label, $idle);
- my (%wtree, %ptree, %pix);
- my $update_size = sub {
- my $new_label = $common->{get_status}();
- $prev_label ne $new_label and $w->{status}->set($prev_label = $new_label);
- };
-
- my $set_node_state_flat = sub {
- my ($node, $state) = @_;
- unless ($pix{$state}) {
- foreach ("$ENV{SHARE_PATH}/$state.png", "$ENV{SHARE_PATH}/rpm-$state.png") {
- if (-e $_) {
- $pix{$state} = [ gtkcreate_png($_) ];
- last;
- }
- }
- $pix{$state} or die "unable to find a pixmap for state $state";
- }
- $w->{tree}->node_set_pixmap($node, 1, $pix{$state}[0], $pix{$state}[1]);
- };
- my $set_node_state_tree; $set_node_state_tree = sub {
- my ($node, $state) = @_;
- unless ($pix{$state}) {
- foreach ("$ENV{SHARE_PATH}/$state.png", "$ENV{SHARE_PATH}/rpm-$state.png") {
- if (-e $_) {
- $pix{$state} = [ gtkcreate_png($_) ];
- last;
- }
- }
- $pix{$state} or die "unable to find a pixmap for state $state";
- }
- if ($node->{state} ne $state) {
- if ($node->row->is_leaf) {
- my $parent = $node->row->parent;
- my $stats = $parent->{state_stats} ||= {}; --$stats->{$node->{state}}; ++$stats->{$state};
- my @list = grep { $stats->{$_} > 0 } keys %$stats;
- my $new_state = @list == 1 ? $list[0] : 'semiselected';
- $parent->{state} ne $new_state and $set_node_state_tree->($parent, $new_state);
- }
- $w->{tree}->node_set_pixmap($node, 1, $pix{$state}[0], $pix{$state}[1]);
- $node->{state} = $state; #- hack to to get this features efficiently.
- }
- };
- my $set_node_state = $common->{state}{flat} ? $set_node_state_flat : $set_node_state_tree;
-
- my $set_leaf_state = sub {
- my ($leaf, $state) = @_;
- $set_node_state->($_, $state) foreach @{$ptree{$leaf}};
- };
- my $add_parent; $add_parent = sub {
- my ($root, $state) = @_;
- $root or return undef;
- if (my $w = $wtree{$root}) { return $w }
- my $s; foreach (split '\|', $root) {
- my $s2 = $s ? "$s|$_" : $_;
- $wtree{$s2} ||= do {
- my $n = $w->{tree}->insert_node($s ? $add_parent->($s, $state) : undef, undef, [$_, '', ''], 5, (undef) x 4, 0, 0);
- $n;
- };
- $s = $s2;
- }
- $set_node_state->($wtree{$s}, $state); #- use this state by default as tree is building.
- $wtree{$s};
- };
- my $add_node = sub {
- my ($leaf, $root) = @_;
- my $state = $common->{node_state}($leaf) or return;
- my $node = $w->{tree}->insert_node($add_parent->($root, $state), undef, [$leaf, '', ''], 5, (undef) x 4, 1, 0);
- $set_node_state->($node, $state);
- push @{$ptree{$leaf}}, $node;
- };
- $common->{rebuild_tree} = sub {
- foreach (values %ptree) {
- delete $_->{state} foreach @$_;
- }
- foreach (values %wtree) {
- delete $_->{state};
- delete $_->{state_stats};
- }
- %ptree = %wtree = ();
-
- $w->{tree}->freeze;
- while (1) { $w->{tree}->remove_node($w->{tree}->node_nth(0) || last) }
-
- $set_node_state = $common->{state}{flat} ? $set_node_state_flat : $set_node_state_tree;
- $common->{build_tree}($add_node, $common->{state}{flat}, $common->{tree_mode});
-
- $w->{tree}->thaw;
- &$update_size;
- };
- $common->{rebuild_tree}->();
-
- my $display_info = sub { gtktext_insert($w->{info}, $common->{get_info}($curr)); 0 };
- my $children = sub { map { ($w->{tree}->node_get_pixtext($_, 0))[0] } gtkctree_children($_[0]) };
- my $toggle = sub {
- if (ref $curr && ! $_[0]) {
- $w->{tree}->toggle_expansion($curr);
- } else {
- if (ref $curr) {
- my @l = $common->{grep_allowed_to_toggle}($children->($curr)) or return;
- my @unsel = $common->{grep_unselected}(@l);
- my @p = @unsel ?
- @unsel : # not all is selected, select all
- @l;
- $common->{toggle_nodes}($set_leaf_state, @p);
- &$update_size;
- $parent = $curr;
- } else {
- $common->{check_interactive_to_toggle}($curr) and $common->{toggle_nodes}($set_leaf_state, $curr);
- &$update_size;
- }
- }
- };
-
- $w->{tree}->signal_connect(key_press_event => sub {
- my ($w, $e) = @_;
- my $c = chr($e->{keyval} & 0xff);
- $toggle->(0) if $e->{keyval} >= 0x100 ? $c eq "\r" || $c eq "\x8d" : $c eq ' ';
- 1;
- });
- $w->{tree}->signal_connect(tree_select_row => sub {
- Gtk->timeout_remove($idle) if $idle;
-
- if ($_[1]->row->is_leaf) {
- ($curr) = $w->{tree}->node_get_pixtext($_[1], 0);
- $parent = $_[1]->row->parent;
- $idle = Gtk->timeout_add(100, $display_info);
- } else {
- $curr = $_[1];
- }
- $toggle->(1) if $_[2] == 1;
- });
- &$update_size;
- my $b = before_leaving { #- ensure cleaning here.
- foreach (values %ptree) {
- delete $_->{state} foreach @$_;
- }
- foreach (values %wtree) {
- delete $_->{state};
- delete $_->{state_stats};
- }
- };
- $w->{w}->main;
-}
-
-1;
-
-#-###############################################################################
-#- rubbish
-#-###############################################################################
-
-#-sub label_align($$) {
-#- my $w = shift;
-#- local $_ = shift;
-#- $w->set_alignment(!/W/i, !/N/i);
-#- $w
-#-}
-
diff --git a/perl-install/network.pm b/perl-install/network.pm
deleted file mode 100644
index 9979e439e..000000000
--- a/perl-install/network.pm
+++ /dev/null
@@ -1,5 +0,0 @@
-package network; # $Id$
-
-use network::network;
-
-1;
diff --git a/perl-install/network/adsl.pm b/perl-install/network/adsl.pm
deleted file mode 100644
index d8d2a4758..000000000
--- a/perl-install/network/adsl.pm
+++ /dev/null
@@ -1,172 +0,0 @@
-package network::adsl;
-
-use common;
-use run_program;
-use network::tools;
-use network::ethernet;
-use modules;
-
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(adsl_ask_info adsl_detect adsl_conf adsl_conf_backend);
-
-sub configure {
- my ($netcnx, $netc, $intf, $first_time) = @_;
- $::isInstall and $in->set_help('configureNetworkADSL');
- conf_adsl_step1:
- my $type = $in->ask_from_list_(_("Connect to the Internet"),
- _("The most common way to connect with adsl is pppoe.
-Some connections use pptp, a few ones use dhcp.
-If you don't know, choose 'use pppoe'"), [__("use pppoe"), __("use pptp"), __("use dhcp"), __("Alcatel speedtouch usb")]) or return;
- $type =~ s/use //;
- if ($type eq 'pppoe') {
- $in->do_pkgs->install("rp-$type");
- $netcnx->{type} = "adsl_$type";
- $netcnx->{"adsl_$type"} = {};
- adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
- #-network::configureNetwork($prefix, $netc, $in, $intf, $first_time);
-# if ($::isStandalone and $netc->{NET_DEVICE}) {
-# $in->ask_yesorno(_("Network interface"),
-# _("I'm about to restart the network device %s. Do you agree?", $netc->{NET_DEVICE}), 1)
-# and system("$prefix/sbin/ifdown $netc->{NET_DEVICE}; $prefix/sbin/ifup $netc->{NET_DEVICE}");
-# }
- }
- if ($type eq 'dhcp') {
- $in->do_pkgs->install(qw(dhcpcd));
- go_ethernet($netc, $intf, 'dhcp', '', '', $first_time) or goto conf_adsl_step1;
- }
- if ($type eq 'pptp') {
- $in->do_pkgs->install(qw(pptp-adsl));
- $netcnx->{type} = "adsl_$type";
- $netcnx->{"adsl_$type"} = {};
- adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
- }
- if ($type =~ /speedtouch/) {
- $type = 'speedtouch';
- $in->do_pkgs->install(qw(speedtouch));
- $netcnx->{type} = "adsl_$type";
- $netcnx->{"adsl_$type"} = {};
- $netcnx->{"adsl_$type"}{vpivci} = '';
- adsl_conf($netcnx->{"adsl_$type"}, $netc, $intf, $type) or goto conf_adsl_step1;
- }
- $type =~ /speedtouch/ or $netconnect::need_restart_network = 1;
- 1;
-}
-
-sub adsl_ask_info {
- my ($adsl, $netc, $intf) = @_;
- add2hash($netc, { dnsServer2 => '', dnsServer3 => '', DOMAINNAME2 => '' });
- add2hash($adsl, { login => '', passwd => '', passwd2 => '' });
- ask_info2($adsl, $netc);
-}
-
-#- adsl_detect : detect adsl modem on a given interface
-#- input :
-#- $interface : interface where the modem is supposed to be connected : should be "ethx"
-#- output:
-#- true/false : success|failed
-sub adsl_detect {
- return 0;
- my ($interface) = @_;
- run_program::rooted($prefix, "ifconfig $interface 10.0.0.10 netmask 255.255.255.0");
- my $ret=run_program::rooted($prefix, "/bin/ping -c 1 10.0.0.138 2> /dev/null");
- run_program::rooted($prefix, "ifconfig $interface 0.0.0.0 netmask 255.255.255.0");
- run_program::rooted($prefix, "/etc/init.d/network restart");
- $ret;
-}
-
-sub adsl_conf {
- my ($adsl, $netc, $intf, $adsl_type) = @_;
-
- adsl_conf_step_1:
- adsl_ask_info ($adsl, $netc, $intf) or return;
- adsl_conf_step_2:
- $adsl_type eq 'speedtouch' or conf_network_card($netc, $intf, 'static' , '10.0.0.10' ) or goto adsl_conf_step_1;
- adsl_conf_backend($adsl, $netc, $adsl_type);
- 1;
-}
-
-sub adsl_conf_backend {
- my ($adsl, $netc, $adsl_type, $netcnx) = @_;
- defined $netcnx and $netc->{adsltype} = $netcnx->{type};
- $netc->{adsltype} ||= "adsl_$adsl_type";
- mkdir_p("$prefix/etc/ppp");
- output("$prefix/etc/ppp/options",
-'lock
-noipdefault
-persist
-noauth
-usepeerdns
-defaultroute
-') if $adsl_type =~ /pptp|pppoe|speedtouch/;
-
- write_secret_backend($adsl->{login}, $adsl->{passwd});
-
- if ($adsl_type eq 'pppoe') {
- substInFile {
- s/ETH=.*\n/ETH=$netc->{NET_DEVICE}\n/;
- s/USER=.*\n/USER=$adsl->{login}\n/;
- } "$prefix/etc/ppp/pppoe.conf";
- }
-
- if ($adsl_type eq 'speedtouch') {
- $netc->{vpivci} =~ /(\d+)_(\d+)/;
- output("$prefix/etc/ppp/peers/adsl",
-qq{noauth
-noipdefault
-pty "/usr/bin/pppoa3 -vpi $1 -vci $2"
-sync
-kdebug 1
-noaccomp
-nopcomp
-noccp
-novj
-holdoff 4
-maxfail 25
-persist
-usepeerdns
-defaultroute
-user "$adsl->{login}"
-});
- modules::add_alias($_->[0], $_->[1]) foreach (['char-major-108', 'ppp_generic'],
- ['tty-ldisc-3', 'ppp_async'],
- ['tty-ldisc-13', 'n_hdlc'],
- ['tty-ldisc-14', 'ppp_synctty'],
- ['ppp-compress-21', 'bsd_comp'],
- ['ppp-compress-24', 'ppp_deflate'],
- ['ppp-compress-26', 'ppp_deflate']);
- $::isStandalone and modules::write_conf($prefix);
- $in->do_pkgs->install('speedtouch_mgmt');
- -e "$prefix/usr/share/speedtouch/mgmt.o" or $in->ask_warn('', _('You need the alcatel microcode.
-Download it at
-http://www.alcatel.com/consumer/dsl/dvrreg_lx.htm
-and copy the mgmt.o in /usr/share/speedtouch'));
- }
-
- if ($adsl_type eq 'pptp') {
- write_cnx_script($netc, "adsl",
-"/sbin/route del default
-/usr/bin/pptp 10.0.0.138 name $adsl->{login}
-",
-'/usr/bin/killall pptp pppd
-', $netc->{adsltype}) } elsif ($adsl_type eq 'pppoe') {
- write_cnx_script($netc, "adsl",
-"/sbin/route del default
-LC_ALL=C LANG=C LANGUAGE=C LC_MESSAGES=C /usr/sbin/adsl-start $netc->{NET_DEVICE} $adsl->{login}
-",
-'/usr/sbin/adsl-stop
-/usr/bin/killall pppoe pppd
-', $netc->{adsltype}) } elsif ($adsl_type eq 'speedtouch') {
- write_cnx_script($netc, 'adsl',
-'/sbin/route del default
-/usr/share/speedtouch/speedtouch.sh start
-',
-'/usr/share/speedtouch/speedtouch.sh stop
-', $netc->{adsltype}) }
-
- $netc->{NET_INTERFACE}='ppp0';
-}
-
-1;
diff --git a/perl-install/network/ethernet.pm b/perl-install/network/ethernet.pm
deleted file mode 100644
index e25cb7e68..000000000
--- a/perl-install/network/ethernet.pm
+++ /dev/null
@@ -1,216 +0,0 @@
-package network::ethernet;
-
-use network::network;
-use modules;
-use any;
-use detect_devices;
-use common;
-use run_program;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(configureNetwork conf_network_card conf_network_card_backend go_ethernet);
-
-sub configure_cable {
- my ($netcnx, $netc, $intf, $first_time) = @_;
- $::isInstall and $in->set_help('configureNetworkCable');
- $netcnx->{type}='cable';
- # $netcnx->{cable}={};
- # $in->ask_from_entries_ref(_("Cable connection"),
- # _("Please enter your host name if you know it.
- # Some DHCP servers require the hostname to work.
- # Your host name should be a fully-qualified host name,
- # such as ``mybox.mylab.myco.com''."),
- # [_("Host name:")], [ \$netcnx->{cable}{hostname} ]);
- if ($::expert) {
- my @m=(
- { description => "dhcpcd",
- c => 1},
- { description => "dhcpxd",
- c => 3},
- { description => "dhcp-client",
- c => 4},
- );
- if (my $f = $in->ask_from_listf(_("Connect to the Internet"),
- _("Which dhcp client do you want to use?
-Default is dhcpcd"),
- sub { $_[0]{description} },
- \@m )) {
- $f->{c}==1 and $netcnx->{dhcp_client}="dhcpcd" and $in->do_pkgs->install(qw(dhcpcd));
- $f->{c}==3 and $netcnx->{dhcp_client}="dhcpxd" and $in->do_pkgs->install(qw(dhcpxd));
- $f->{c}==4 and $netcnx->{dhcp_client}="dhcp-client" and $in->do_pkgs->install(qw(dhcp-client));
- }
- } else {
- $in->do_pkgs->install(qw(dhcpcd));
- }
- go_ethernet($netc, $intf, 'dhcp', '', '', $first_time);
- write_cnx_script($netc, "cable",
-qq(
-/sbin/ifup $netc->{NET_DEVICE}
-),
-qq(
-/sbin/ifdown $netc->{NET_DEVICE}
-), $netcnx->{type});
- 1;
-}
-
-sub configure_lan {
- my ($netcnx, $netc, $intf, $first_time) = @_;
- $::isInstall and $in->set_help('configureNetworkIP');
- configureNetwork($netc, $intf, $first_time) or return;
- configureNetwork2($in, $prefix, $netc, $intf);
- $netc->{NETWORKING} = "yes";
- if ($netc->{GATEWAY} || grep { $_->{BOOTPROTO} eq 'dhcp' } values %$intf) {
- $netcnx->{type}='lan';
- $netcnx->{NET_DEVICE} = $netc->{NET_DEVICE} = '';
- $netcnx->{NET_INTERFACE} = 'lan'; #$netc->{NET_INTERFACE};
- write_cnx_script($netc, "local network",
-qq(
-/etc/rc.d/init.d/network restart
-),
-qq(
-/etc/rc.d/init.d/network stop
-/sbin/ifup lo
-), $netcnx->{type});
- }
- $::isStandalone and modules::write_conf($prefix);
- 1;
-}
-
-sub conf_network_card {
- my ($netc, $intf, $type, $ipadr, $netadr) = @_;
- #-type =static or dhcp
- any::load_category($in, 'network/main|usb', !$::expert, 1);
- my @all_cards=conf_network_card_backend($netc, $intf, $type, undef, $ipadr, $netadr);
- my $interface;
- @all_cards == () and $in->ask_warn('', _("No ethernet network adapter has been detected on your system.
-I cannot set up this connection type.")) and return;
- @all_cards == 1 and $interface = $all_cards[0]->[0] and goto l1;
- again :
- $interface = $in->ask_from_list(_("Choose the network interface"),
- _("Please choose which network adapter you want to use to connect to Internet"),
- [ map { $_->[0] . ($_->[1] ? " ( using module $_->[1] )" : "") } @all_cards ]
- ) or return;
- defined $interface or goto again;
- l1:
- $::isStandalone and modules::write_conf($prefix);
-
- my $device=conf_network_card_backend($netc, $intf, $type, $interface, $ipadr, $netadr, $interface);
-# if ( $::isStandalone and !($type eq "dhcp")) {
-# $in->ask_yesorno(_("Network interface"),
-# _("I'm about to restart the network device:\n") . $device . _("\nDo you agree?"), 1) and configureNetwork2($in, $prefix, $netc, $intf) and system("$prefix/sbin/ifdown $device;$prefix/sbin/ifup $device");
-# }
- 1;
-}
-
-#- conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling load_category($in, 'network/main|usb', !$::expert, 1) or load_category_backend before calling this function. Basically, you call this function in 2 times.
-#- input
-#- $prefix
-#- $netc
-#- $intf
-#- $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
-#- $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
-#- $ipadr : facultative, ip address of the interface : string
-#- $netadr : facultative, netaddress of the interface : string
-#- when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-#- $intf output: $device is the result of
-#- $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
-#- $intf->{$device}->{BOOTPROTO} : $type
-#- $intf->{$device}->{NETMASK} : '255.255.255.0'
-#- $intf->{$device}->{NETWORK} : $netadr
-#- $intf->{$device}->{ONBOOT} : "yes"
-#- $netc output:
-#- $netc->{nb_cards} : nb of ethernet cards
-#- $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-#- output:
-#- $all_cards : a list of a list ( [eth1, module1], ... , [ethn, modulen]). Pass the ethx as $interface in further call.
-#- $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-sub conf_network_card_backend {
- my ($netc, $intf, $type, $interface, $ipadr, $netadr) = @_;
- #-type =static or dhcp
- if (!$interface) {
- my @all_cards = detect_devices::getNet();
- $netc->{nb_cards} = @all_cards;
-
- my @devs = detect_devices::pcmcia_probe();
- modules::mergein_conf("$prefix/etc/modules.conf");
- my $saved_driver;
- return map {
- my $interface = $_;
- my $a = modules::get_alias($interface);
- my $b;
- foreach (@devs) {
- $_->{device} eq $interface and $b = $_->{driver};
- }
- $a ||= $b;
- if ($a) { $saved_driver = $a }
- [$interface, $saved_driver];
- } @all_cards;
- }
- my ($device) = $interface =~ /(eth[0-9]+)/ or die("the interface is not an ethx");
- $netc->{NET_DEVICE} = $device; #- one consider that there is only ONE Internet connection device..
-
- @{$intf->{$device}}{qw(DEVICE BOOTPROTO NETMASK NETWORK ONBOOT)} =
- ($device, $type, '255.255.255.0', $netadr, 'yes');
-
- $intf->{$device}->{IPADDR} = $ipadr if $ipadr;
- $device;
-}
-
-sub go_ethernet {
- my ($netc, $intf, $type, $ipadr, $netadr, $first_time) = @_;
- conf_network_card($netc, $intf, $type, $ipadr, $netadr) or return;
- $netc->{NET_INTERFACE}=$netc->{NET_DEVICE};
- configureNetwork($netc, $intf, $first_time) or return;
-# if ( $::isStandalone and $netc->{NET_DEVICE}) {
-# $in->ask_yesorno(_("Network interface"),
-# _("I'm about to restart the network device %s. Do you agree?", $netc->{NET_DEVICE}), 1) and system("$prefix/sbin/ifdown $netc->{NET_DEVICE}; $prefix/sbin/ifup $netc->{NET_DEVICE}");
-# }
- 1;
-}
-
-sub configureNetwork {
- my ($netc, $intf, $first_time) = @_;
- local $_;
- any::load_category($in, 'network/main|usb', !$::expert, 1);
- my @l = detect_devices::getNet() or die _("no network card found");
- my @all_cards = conf_network_card_backend ($netc, $intf, undef, undef, undef, undef);
-
- configureNetwork_step_1:
- my $n_card=0;
- $netc ||= {};
- my $last; foreach (@l) {
- my $intf2 = findIntf($intf ||= {}, $_);
- add2hash($intf2, $last);
- add2hash($intf2, { NETMASK => '255.255.255.0' });
- configureNetworkIntf($netc, $in, $intf2, $netc->{NET_DEVICE}, 0, $all_cards[$n_card]->[1]) or return;
-
- $last = $intf2;
- $n_card++;
- }
- #- {
- #- my $wait = $o->wait_message(_("Hostname"), _("Determining host name and domain..."));
- #- network::guessHostname($o->{prefix}, $o->{netc}, $o->{intf});
- #- }
- $last or return;
- if ($last->{BOOTPROTO} =~ /^(dhcp|bootp)$/) {
- $netc->{minus_one} = 1;
- my $dhcp_hostname = $netc->{HOSTNAME};
- $::isInstall and $in->set_help('configureNetworkHostDHCP');
- $in->ask_from(_("Configuring network"),
-_("Please enter your host name if you know it.
-Some DHCP servers require the hostname to work.
-Your host name should be a fully-qualified host name,
-such as ``mybox.mylab.myco.com''."),
- [ { label => _("Host name"), val => \$netc->{HOSTNAME} }]) or goto configureNetwork_step_1;
- $netc->{HOSTNAME} ne $dhcp_hostname and $netc->{DHCP_HOSTNAME} = $netc->{HOSTNAME};
- } else {
- configureNetworkNet($in, $netc, $last ||= {}, @l) or goto configureNetwork_step_1;
- }
- miscellaneousNetwork($in);
- 1;
-}
-
-1;
diff --git a/perl-install/network/isdn.pm b/perl-install/network/isdn.pm
deleted file mode 100644
index 4b081274e..000000000
--- a/perl-install/network/isdn.pm
+++ /dev/null
@@ -1,276 +0,0 @@
-package network::isdn;
-
-use network::isdn_consts;
-use common;
-use any;
-use modules;
-use run_program;
-use log;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-use MDK::Common::File;
-@ISA = qw(Exporter);
-@EXPORT = qw(isdn_write_config isdn_write_config_backend get_info_providers_backend isdn_ask_info isdn_ask_protocol isdn_ask isdn_detect isdn_detect_backend isdn_get_list isdn_get_info);
-
-sub configure {
- my ($netcnx, $netc) = @_;
- isdn_step_1:
- defined $netc->{autodetect}{isdn}{id} and goto intern_pci;
- $::isInstall and $in->set_help('configureNetworkISDN');
- my $e = $in->ask_from_list_(_("Network Configuration Wizard"),
- _("What kind is your ISDN connection?"), [ __("Internal ISDN card"), __("External ISDN modem")]
- ) or return;
- if ($e =~ /card/) {
- intern_pci:
- $netc->{isdntype}='isdn_internal';
- $netcnx->{isdn_internal}={};
- $netcnx->{isdn_internal}{$_} = $netc->{autodetect}{isdn}{$_} foreach ('description', 'vendor', 'id', 'driver', 'card_type', 'type');
- isdn_detect($netcnx->{isdn_internal}, $netc) or return;
- } else {
- $netc->{isdntype}='isdn_external';
- $netcnx->{isdn_external}={};
- $netcnx->{isdn_external}{device}=$netc->{autodetect}{modem};
- $netcnx->{isdn_external}{special_command}='AT&F&O2B40';
- require network::modem;
- network::modem::pppConfig($netcnx->{isdn_external}, $mouse, $netc) or goto isdn_step_1;
- }
- 1;
-}
-
-sub isdn_write_config {
- my ($isdn, $netc) = @_;
- isdn_write_config_step_1:
- my $e = $in->ask_from_list_(_("Network Configuration Wizard"),
- _("Which ISDN configuration do you prefer?
-
-* The Old configuration uses isdn4net. It contains powerfull
- tools, but is tricky to configure, and not standard.
-
-* The New configuration is easier to understand, more
- standard, but with less tools.
-
-We recommand the light configuration.
-"), [ __("New configuration (isdn-light)"), __("Old configuration (isdn4net)")]
- ) or return;
- my ($rmpackage, $instpackage) = $e =~ /light/ ? ('isdn4net', 'isdn-light') : ('isdn-light', 'isdn4net');
- if (!$::isStandalone) {
- require pkgs;
- my $p = pkgs::packageByName($in->{packages}, $rmpackage);
- $p && pkgs::packageFlagSelected($p) and pkgs::unselectPackage($in->{packages}, $p);
- }
- run_program::rooted($prefix, "rpm", "-e", "$rmpackage");
- $in->do_pkgs->install($instpackage, if_($isdn->{speed} =~ /128/, 'ibod'), 'isdn4k-utils');
- my $light = $e =~ /light/ ? 1 : 0;
- isdn_write_config_backend($isdn, $light, $netc);
- 1;
-}
-
-sub isdn_write_config_backend {
- my ($isdn, $light, $netc, $netcnx) = @_;
- defined $netcnx and $netc->{isdntype} = $netcnx->{type};
- if ($light) {
- modules::mergein_conf("$prefix/etc/modules.conf");
- if ($isdn->{id}) {
- isdn_detect_backend($isdn);
- } else {
- my $a="";
- defined $isdn->{$_} and $a .= "$_=" . $isdn->{$_} . " " foreach qw(type protocol mem io io0 io1 irq);
- $isdn->{driver} eq "hisax" and $a.="id=HiSax";
- modules::set_options($isdn->{driver}, $a);
- }
- modules::add_alias("ippp0", $isdn->{driver});
- $::isStandalone and modules::write_conf($prefix);
- foreach my $f ('ioptions1B', 'ioptions2B') {
- substInFile { s/^name .*\n//; $_ .= "name $isdn->{login}\n" if eof } "$prefix/etc/ppp/$f";
- chmod 0600, $f;
- }
- foreach my $f ('isdn1B.conf', 'isdn2B.conf') {
- my $a=1;
- substInFile {
- s/EAZ =.*/EAZ = $isdn->{phone_in}/;
- s/PHONE_OUT =.*/PHONE_OUT = $isdn->{phone_out}/;
- if (/NAME = ippp0/ .. /PPPBIND = 0/) {
- s/HUPTIMEOUT =.*/HUPTIMEOUT = $isdn->{huptimeout}/;
- }
- } "$prefix/etc/isdn/$f";
- chmod 0600, $f;
- }
- my $bundle = $isdn->{speed} =~ /64/ ? "1B" : "2B";
- symlinkf("isdn" . $bundle . ".conf", "$prefix/etc/isdn/isdnctrl.conf");
- symlinkf("ioptions" . $bundle, "$prefix/etc/ppp/ioptions");
- } else {
- my $f = "$prefix/etc/isdn/profile/link/myisp";
- output ($f,
- qq(
-I4L_USERNAME="$isdn->{login}"
-I4L_SYSNAME=""
-I4L_LOCALMSN="$isdn->{phone_in}"
-I4L_REMOTE_OUT="$isdn->{phone_out}"
-I4L_DIALMODE="$isdn->{dialing_mode}"
-) . if_($isdn->{speed} =~ /128/, 'SLAVE="ippp1"
-'));
- chmod 0600, $f;
-
- output "$prefix/etc/isdn/profile/card/mycard",
- qq(
-I4L_MODULE="$isdn->{driver}"
-I4L_TYPE="$isdn->{type}"
-I4L_IRQ="$isdn->{irq}"
-I4L_MEMBASE="$isdn->{mem}"
-I4L_PORT="$isdn->{io}"
-I4L_IO0="$isdn->{io0}"
-I4L_IO1="$isdn->{io1}"
-I4L_ID="HiSax"
-I4L_FIRMWARE="$isdn->{firmware}"
-);
-
- output "$prefix/etc/ppp/ioptions",
- "lock
-usepeerdns
-defaultroute
-";
- system "$prefix/etc/rc.d/init.d/isdn4linux restart";
- }
-
- substInFile { s/^FIRMWARE.*\n//; $_ .= qq(FIRMWARE="$isdn->{firmware}"\n) if eof } "$prefix/etc/sysconfig/network-scripts/ifcfg-ippp0";
-
- write_secret_backend($isdn->{login}, $isdn->{passwd});
-
- write_cnx_script($netc, "isdn",
-"/sbin/route del default
-/sbin/ifup ippp0
-/sbin/isdnctrl dial ippp0
-" . if_($isdn->{speed} =~ /128/, "service ibod restart
-"),
-"/sbin/isdnctrl hangup ippp0
-/sbin/ifdown ippp0
-" . if_($isdn->{speed} =~ /128/, "service ibod stop
-"), $netc->{isdntype});
- 1;
-}
-
-sub get_info_providers_backend {
- my ($isdn, $netc, $name, $file) = @_;
- $name eq 'Unlisted - edit manually' and return;
- foreach (catMaybeCompressed($file)) {
- chop;
- my ($name_, $phone, $real, $dns1, $dns2) = split '=>';
- if ($name eq $name_) {
- @{$isdn}{qw(user_name phone_out DOMAINNAME2 dnsServer3 dnsServer2)} =
- ((split(/\|/, $name_))[2], $phone, $real, $dns1, $dns2);
- }
- }
-}
-
-sub isdn_ask_info {
- my ($isdn, $netc) = @_;
- my $f = "$ENV{SHARE_PATH}/ldetect-lst/isdn.db";
- $f = "$prefix$f" if !-e $f;
- my $str= $in->ask_from_treelist( _("ISDN Configuration"), _("Select your provider.\nIf it isn't listed, choose Unlisted."),
- '|', ['Unlisted - edit manually',
- read_providers_backend($f)], 'Unlisted - edit manually')
- or return;
- get_info_providers_backend($isdn, $netc, $str || 'Unlisted - edit manually', $f);
- $isdn->{huptimeout} = 180;
- $isdn->{$_} ||= '' foreach qw(phone_in phone_out dialing_mode login passwd passwd2 idl speed);
- add2hash($netc, { dnsServer2 => '', dnsServer3 => '', DOMAINNAME2 => '' });
- ask_info2($isdn, $netc);
-}
-
-sub isdn_ask_protocol {
- my @toto=(
- { description => $::expert ? _("Europe protocol (EDSS1)") : _("Europe protocol"),
- protokol => 2},
- { description => $::expert ? _("Protocol for the rest of the world\nNo D-Channel (leased lines)") : _("Protocol for the rest of the world"),
- protokol => 3}
- );
- my $e = $in->ask_from_listf(_("ISDN Configuration"),
- _("Which protocol do you want to use?"),
- sub { $_[0]{description} },
- \@toto ) or return 0;
- $e->{protokol};
-}
-
-sub isdn_ask {
- my ($isdn, $netc, $label) = @_;
- isdn_ask_step_1:
- my $e = $in->ask_from_list_(_("ISDN Configuration"),
- $label . "\n" . _("What kind of card do you have?"),
- [ __("ISA / PCMCIA"), __("PCI"), __("I don't know") ]
- ) or return;
- if ($e =~ /PCI/) {
- $isdn->{card_type} = 'pci';
- } else {
- $in->ask_from_list_(_("ISDN Configuration"),
- _("
-If you have an ISA card, the values on the next screen should be right.\n
-If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.
-"),
- [ __("Continue"), __("Abort") ]) eq 'Continue' or goto isdn_ask_step_1;
- $isdn->{card_type} = 'isa';
- }
-
- isdn_ask_step_2:
- $e = $in->ask_from_listf(_("ISDN Configuration"),
- _("Which is your ISDN card?"),
- sub { $_[0]{description} },
- [ grep {$_->{card} eq $isdn->{card_type}; } @isdndata ] ) or goto isdn_ask_step_1;
- $e->{$_} and $isdn->{$_} = $e->{$_} foreach qw(driver type mem io io0 io1 irq firmware);
-
- isdn_ask_step_3:
- $isdn->{protocol} = isdn_ask_protocol() or goto isdn_ask_step_2;
- isdn_ask_step_4:
- isdn_ask_info($isdn, $netc) or goto isdn_ask_step_3;
- isdn_write_config($isdn, $netc) or goto isdn_ask_step_4;
- 1;
-}
-
-sub isdn_detect {
- my ($isdn, $netc) = @_;
- if ($isdn->{id}) {
- log::l("found isdn card : $isdn->{description}; vendor : $isdn->{vendor};id : $isdn->{id}; driver : $isdn->{driver}\n");
- $isdn->{description} =~ s/\|/ -- /;
- if ($isdn->{type} eq '') {
- isdn_ask($isdn, $netc, _("I have detected an ISDN PCI card, but I don't know its type. Please select a PCI card on the next screen.")) or return;
- } else {
- isdn_detect_step_1:
- $isdn->{protocol}=isdn_ask_protocol() or return;
- isdn_detect_step_2:
- isdn_ask_info($isdn, $netc) or goto isdn_detect_step_1;
- isdn_write_config($isdn, $netc) or goto isdn_detect_step_2;
- }
- } else {
- isdn_ask($isdn, $netc, _("No ISDN PCI card found. Please select one on the next screen.")) or return;
- }
- $netc->{$_}='ippp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
- 1;
-}
-
-sub isdn_detect_backend {
- my ($isdn) = @_;
- if (my ($c) = (modules::probe_category('network/isdn'))) {
- $isdn->{$_} = $c->{$_} foreach qw(description vendor id driver options firmware);
- $isdn->{$_} = sprintf("%0x", $isdn->{$_}) foreach ('vendor', 'id');
- $isdn->{card_type} = 'pci';
- ($isdn->{type}) = $isdn->{options} =~ /type=(\d+)/;
-# $c->{options} !~ /id=HiSax/ && $isdn->{driver} eq "hisax" and $c->{options} .= " id=HiSax";
- if ($c->{options} !~ /protocol=/ && $isdn->{protocol} =~ /\d/) {
- modules::set_options($c->{driver}, $c->{options} . " protocol=" . $isdn->{protocol});
- }
- $c->{options} =~ /protocol=(\d)/ and $isdn->{protocol} = $1;
- }
-}
-
-sub isdn_get_list {
- map { $_->{description} } @isdndata;
-}
-
-sub isdn_get_info {
- my ($desc) = @_;
- foreach (@isdndata) {
- return $_ if ($_->{description} eq $desc);
- }
-}
-
-1;
diff --git a/perl-install/network/isdn_consts.pm b/perl-install/network/isdn_consts.pm
deleted file mode 100644
index 357da529a..000000000
--- a/perl-install/network/isdn_consts.pm
+++ /dev/null
@@ -1,326 +0,0 @@
-package network::isdn; # $Id$
-
-@isdndata =
- (
- {description => "Teles 16.0 (ISA)", #1 irq, mem, io
- driver => 'hisax',
- type => '1',
- irq => '5',
- mem => '0xd000',
- io => '0xd80',
- card => 'isa',
- },
- {description => "Teles 8.0 (ISA)", #2 irq, mem
- driver => 'hisax',
- type => '2',
- irq => '9',
- mem => '0xd800',
- card => 'isa',
- },
- {description => "Teles 16.3 (ISA non PnP)", #3 irq, io
- driver => 'hisax',
- type => '3',
- irq => '9',
- io => '0xd80',
- card => 'isa',
- },
- {description => "Teles 16.3c (ISA PnP)", #14 irq, io
- driver => 'hisax',
- type => '14',
- irq => '9',
- io => '0xd80',
- card => 'isa',
- },
- {description => "Creatix/Teles (ISA PnP)", #4 irq, io0 (ISAC), io1 (HSCX)
- driver => 'hisax',
- type => '4',
- irq => '5',
- io0 => '0x0000',
- io1 => '0x0000',
- card => 'isa',
- },
- {description => "Teles generic (PCI)", #21 no parameter
- driver => 'hisax',
- type => '21',
- card => 'pci',
- },
- {description => "Teles 16.3 (PCMCIA)", #8 irq, io
- driver => 'hisax',
- type => '8',
- irq => '',
- io => '0x',
- card => 'isa',
- },
- {description => "Teles S0Box", #25 irq, io (of the used lpt port)
- driver => 'hisax',
- type => '25',
- irq => '7',
- io => '0x378',
- card => 'isa',
- },
- {description => "ELSA PCC/PCF cards (ISA)", #6 io or nothing for autodetect (the io is required only if you have n>1 ELSA card )
- driver => 'hisax',
- type => '6',
- io => "",
- card => 'isa',
- },
- {description => "ELSA Quickstep 1000 (ISA)", #7 irq, io (from isapnp setup)
- driver => 'hisax',
- type => '7',
- irq => '5',
- io => '0x300',
- card => 'isa',
- },
- {description => "ELSA Quickstep 1000 (PCI)", #18 no parameter
- driver => 'hisax',
- type => '18',
- card => 'pci',
- },
- {description => "ELSA Quickstep 3000 (PCI)", #18 no parameter
- driver => 'hisax',
- type => '18',
- card => 'pci',
- },
- {description => "ELSA generic (PCMCIA)", #10 irq, io (set with card manager)
- driver => 'hisax',
- type => '10',
- irq => '',
- io => '0x',
- card => 'isa',
- },
- {description => "ELSA MicroLink (PCMCIA)", #10 irq, io (set with card manager)
- driver => 'elsa_cs',
- card => 'isa',
- },
- {description => "ITK ix1-micro Rev.2 (ISA)", #9 irq, io
- driver => 'hisax',
- type => '9',
- irq => '9',
- io => '0xd80',
- card => 'isa',
- },
- {description => "Eicon.Diehl Diva (ISA PnP)", #11 irq, io
- driver => 'hisax',
- type => '11',
- irq => '9',
- io => '0x180',
- card => 'isa',
- },
- {description => "Eicon.Diehl Diva 20 (PCI)", #11 no parameter
- driver => 'hisax',
- type => '11',
- card => 'pci',
- },
- {description => "Eicon.Diehl Diva 20PRO (PCI)", #11 no parameter
- driver => 'hisax',
- type => '11',
- card => 'pci',
- },
- {description => "Eicon.Diehl Diva 20_U (PCI)", #11 no parameter
- driver => 'hisax',
- type => '11',
- card => 'pci',
- },
- {description => "Eicon.Diehl Diva 20PRO_U (PCI)", #11 no parameter
- driver => 'hisax',
- type => '11',
- card => 'pci',
- },
- {description => "ASUS COM ISDNLink (ISA)", #12 irq, io (from isapnp setup)
- driver => 'hisax',
- type => '12',
- irq => '5',
- io => '0x200',
- card => 'isa',
- },
- {description => "ASUS COM ISDNLink (PCI)",
- driver => 'hisax',
- type => '35',
- card => 'pci',
- },
- {description => "DynaLink (PCI)",
- driver => 'hisax',
- type => '12',
- card => 'pci',
- },
- {description => "DynaLink IS64PH, ASUSCOM (PCI)", #36
- driver => 'hisax',
- type => '36',
- card => 'pci',
- },
- {description => "HFC-2BS0 based cards (ISA)", #13 irq, io
- driver => 'hisax',
- type => '13',
- irq => '9',
- io => '0xd80',
- card => 'isa',
- },
- {description => "HFC 2BDS0 (PCI)", #35 none
- driver => 'hisax',
- type => '35',
- card => 'pci',
- },
- {description => "HFC 2BDS0 S+, SP (PCMCIA)", #37 irq,io (pcmcia must be set with cardmgr)
- driver => 'hisax',
- type => '37',
- card => 'isa',
- },
- {description => "Sedlbauer Speed Card (ISA)", #15 irq, io
- driver => 'hisax',
- type => '15',
- irq => '9',
- io=> '0xd80',
- card => 'isa',
- },
- {description => "Sedlbauer PC/104 (ISA)", #15 irq, io
- driver => 'hisax',
- type => '15',
- irq => '9',
- io => '0xd80',
- card => 'isa',
- },
- {description => "Sedlbauer Speed Card (PCI)", #15 no parameter
- driver => 'hisax',
- type => '15',
- card => 'pci',
- },
- {description => "Sedlbauer Speed Star (PCMCIA)", #22 irq, io (set with card manager)
- driver => 'sedlbauer_cs',
- card => 'isa',
- },
- {description => "Sedlbauer Speed Fax+ (ISA Pnp)", #28 irq, io (from isapnp setup)
- driver => 'hisax',
- type => '28',
- irq => '9',
- io => '0xd80',
- card => 'isa',
- firmware => '/usr/lib/isdn/ISAR.BIN',
- },
- {description => "Sedlbauer Speed Fax+ (PCI)", #28 no parameter
- driver => 'hisax',
- type => '28',
- card => 'pci',
- firmware => '/usr/lib/isdn/ISAR.BIN',
- },
- {description => "USR Sportster internal (ISA)", #16 irq, io
- driver => 'hisax',
- type => '16',
- irq => '9',
- io=> '0xd80',
- card => 'isa',
- },
- {description => "MIC card (ISA)", #17 irq, io
- driver => 'hisax',
- type => '17',
- irq => '9',
- io => '0xd80',
- card => 'isa',
- },
- {description => "Compaq ISDN S0 card (ISA)", #19 irq, io0, io1, io (from isapnp setup io=IO2)
- driver => 'hisax',
- type => '19',
- irq => '5',
- io => '0x0000',
- io0 => '0x0000',
- io1 => '0x0000',
- card => 'isa',
- },
- {description => "NETjet card (PCI)", #20 no parameter
- driver => 'hisax',
- type => '20',
- card => 'pci',
- },
- {description => "Dr. Neuhaus Niccy (ISA PnP)", #24 irq, io0, io1 (from isapnp setup)
- driver => 'hisax',
- type => '24',
- irq => '5',
- io0 => '0x0000',
- io1 => '0x0000',
- card => 'isa',
- },
- {description => "Dr. Neuhaus Niccy (PCI)", ##24 no parameter
- driver => 'hisax',
- type => '24',
- card => 'pci',
- },
- {description => "AVM A1 (Fritz) (ISA non PnP)", #5 irq, io
- driver => 'hisax',
- type => '5',
- irq => '10',
- io => '0x300',
- card => 'isa',
- },
- {description => "AVM (ISA Pnp)", #27 irq, io (from isapnp setup)
- driver => 'hisax',
- type => '27',
- irq => '5',
- io => '0x300',
- card => 'isa',
- },
- {description => "AVM A1 (Fritz) (PCMCIA)", #26 irq, io (set with card manager)
- driver => 'hisax',
- type => '26',
- irq => '',
- card => 'isa',
- },
- {description => "AVM PCI (Fritz!) (PCI)", #27 no parameter
- driver => 'hisax',
- type => '27',
- card => 'pci',
- },
- {description => "AVM B1 (PCI)",
- driver => 'b1pci',
- card => 'pci',
- },
- {description => "Siemens I-Surf 1.0 (ISA Pnp)", #29 irq, io, memory (from isapnp setup)
- driver => 'hisax',
- type => '29',
- irq => '9',
- io => '0xd80',
- mem => '0xd000',
- card => 'isa',
- },
- {description => "ACER P10 (ISA Pnp)", #30 irq, io (from isapnp setup)
- driver => 'hisax',
- type => '30',
- irq => '5',
- io => '0x300',
- card => 'isa',
- },
- {description => "HST Saphir (ISA Pnp)", #31 irq, io
- driver => 'hisax',
- type => '31',
- irq => '5',
- io => '0x300',
- card => 'isa',
- },
- {description => "Telekom A4T (PCI)", #32 none
- driver => 'hisax',
- type => '32',
- card => 'pci',
- },
- {description => "Scitel Quadro (PCI)", #33 subcontroller (4*S0, subctrl 1...4)
- driver => 'hisax',
- type => '33',
- card => 'pci',
- },
- {description => "Gazel ISDN cards (ISA)", #34 irq,io
- driver => 'hisax',
- type => '34',
- irq => '5',
- io => '0x300',
- card => 'isa',
- },
- {description => "Gazel ISDN cards (PCI)", #34 none
- driver => 'hisax',
- type => '34',
- card => 'pci',
- },
- {description => "W6692 and Winbond based cards (PCI)", #36 none
- driver => 'hisax',
- type => '36',
- card => 'pci',
- },
- );
-
-1;
diff --git a/perl-install/network/modem.pm b/perl-install/network/modem.pm
deleted file mode 100644
index 046ebbf8d..000000000
--- a/perl-install/network/modem.pm
+++ /dev/null
@@ -1,91 +0,0 @@
-package network::modem;
-
-use common;
-use any;
-use modules;
-use detect_devices;
-use mouse;
-use network::tools;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(pppConfig modem_detect_backend);
-
-sub configure{
- my ($netcnx, $mouse, $netc) = @_;
- $netcnx->{type}='modem';
- $netcnx->{$netcnx->{type}}={};
- $netcnx->{modem}{device}=$netc->{autodetect}{modem};
- modem_step_1:
- pppConfig($netcnx->{$netcnx->{type}}, $mouse, $netc) or return;
- write_cnx_script($netc, "modem",
-q(
-/sbin/route del default
-ifup ppp0
-),
-q(ifdown ppp0
-killall pppd
-), $netcnx->{type});
- 1;
-}
-
-sub pppConfig {
- my ($modem, $mouse, $netc) = @_;
-
- $mouse ||={};
- $mouse->{device} ||= readlink "$prefix/dev/mouse";
- $::isInstall and $in->set_help('selectSerialPort');
- $modem->{device} ||= $in->ask_from_listf('', _("Please choose which serial port your modem is connected to."),
- \&mouse::serial_port2text,
- [ grep { $_ ne $mouse->{device} } (mouse::serial_ports, if_(-e '/dev/modem', '/dev/modem')) ]) || return;
-
- $::isStandalone || $in->set_help('configureNetworkISP');
- $in->ask_from('', _("Dialup options"), [
-{ label => _("Connection name"), val => \$modem->{connection} },
-{ label => _("Phone number"), val => \$modem->{phone} },
-{ label => _("Login ID"), val => \$modem->{login} },
-{ label => _("Password"), val => \$modem->{passwd}, hidden => 1 },
-{ label => _("Authentication"), val => \$modem->{auth}, list => [ __("PAP"), __("Terminal-based"), __("Script-based"), __("CHAP") ] },
-{ label => _("Domain name"), val => \$modem->{domain} },
-{ label => _("First DNS Server (optional)"), val => \$modem->{dns1} },
-{ label => _("Second DNS Server (optional)"), val => \$modem->{dns2} },
- ]) or return;
- $netc->{DOMAINNAME2} = $modem->{domain};
- any::pppConfig($in, $modem, $prefix);
- $netc->{$_}='ppp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
- 1;
-}
-#-AT&F&O2B40
-#- DialString=ATDT0231389595((
-
-#- modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card
-#- input
-#- $modem
-#- $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ )
-#- output:
-#- $modem->{device} : device where the modem were detected
-sub modem_detect_backend {
- my ($modem, $mouse) = @_;
- $mouse ||={};
- $mouse->{device} ||= readlink "/dev/mouse";
- my $serdev = arch() =~ /ppc/ ? "macserial" : "serial";
- eval { modules::load("$serdev") };
-
- detect_devices::probeSerialDevices();
- foreach ('modem', map { "ttyS$_" } (0..7)) {
- next if $mouse->{device} =~ /$_/;
- next unless -e "/dev/$_";
- detect_devices::hasModem("/dev/$_") and $modem->{device} = "$_", last;
- }
-
- #- add an alias for macserial on PPC
- modules::add_alias('serial', $serdev) if (arch() =~ /ppc/ && $modem->{device});
- my @devs = detect_devices::pcmcia_probe();
- foreach (@devs) {
- $_->{type} =~ /serial/ and $modem->{device} = $_->{device};
- }
-
-}
-
-1;
diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
deleted file mode 100644
index 4998124a1..000000000
--- a/perl-install/network/netconnect.pm
+++ /dev/null
@@ -1,629 +0,0 @@
-
-package network::netconnect;
-
-use diagnostics;
-use strict;
-use vars qw($isdn_init @isdndata @EXPORT);
-
-use common;
-use log;
-use detect_devices;
-use run_program;
-use modules;
-use any;
-use mouse;
-use network;
-
-use network::tools;
-use MDK::Common::Globals "network", qw($in $prefix $connect_file $disconnect_file $connect_prog);
-
-@EXPORT = qw(start_internet stop_internet);
-
-#- intro is called only in standalone.
-sub intro {
- my ($prefix, $netcnx, $in) = @_;
- my ($netc, $mouse, $intf) = ({}, {}, {});
- my $text;
- my $connected;
- my $connect_file = "/etc/sysconfig/network-scripts/net_cnx_up";
- my $disconnect_file = "/etc/sysconfig/network-scripts/net_cnx_down";
- my $connect_prog = "/etc/sysconfig/network-scripts/net_cnx_pg";
- read_net_conf($prefix, $netcnx, $netc);
- if (!$::isWizard) {
- if (connected()) {
- $text=_("You are currently connected to internet.") . (-e $disconnect_file ? _("\nYou can disconnect or reconfigure your connection.") : _("\nYou can reconfigure your connection."));
- $connected=1;
- } else {
- $text=_("You are not currently connected to Internet.") . (-e $connect_file ? _("\nYou can connect to Internet or reconfigure your connection.") : _("\nYou can reconfigure your connection."));
- $connected=0;
- }
- my @l=(
- !$connected && -e $connect_file ? { description => _("Connect"),
- c => 1} : (),
- $connected && -e $disconnect_file ? { description => _("Disconnect"),
- c => 2} : (),
- { description => _("Configure the connection"),
- c => 3},
- { description => _("Cancel"),
- c => 4},
- );
- my $e = $in->ask_from_listf(_("Internet connection & configuration"),
- _($text),
- sub { $_[0]{description} },
- \@l );
- run_program::rooted($prefix, $connect_prog) if ($e->{c}==1);
- run_program::rooted($prefix, $disconnect_file) if ($e->{c}==2);
- main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0) if ($e->{c}==3);
- $in->exit(0) if ($e->{c}==4);
- } else {
- main($prefix, $netcnx, $netc, $mouse, $in, $intf, 0, 0);
- }
-}
-
-sub detect {
- my ($auto_detect, $net_install) = @_;
- my $isdn={};
- require network::isdn;
- network::isdn->import;
- isdn_detect_backend($isdn);
- $auto_detect->{isdn}{$_}=$isdn->{$_} foreach qw(description vendor id driver card_type type);
- $auto_detect->{isdn}{description} =~ s/.*\|//;
-
- modules::load_category('network/main|usb');
- require network::ethernet;
- network::ethernet->import;
- my @all_cards = conf_network_card_backend (undef, undef, undef, undef, undef, undef);
- require network::adsl;
- network::adsl->import;
- map {
- ( !$net_install and adsl_detect($_->[0]) ) ? $auto_detect->{adsl}=$_->[0] : $auto_detect->{lan}{$_->[0]}=$_->[1]; } @all_cards;
- my $modem={};
- require network::modem;
- network::modem->import;
- modem_detect_backend($modem);#, $mouse);
- $modem->{device} and $auto_detect->{modem}=$modem->{device};
-}
-
-sub pre_func {
- my ($text) = @_;
- $in->isa('interactive_gtk') or return;
- $::Wizard_no_previous=1;
- if ($::isStandalone) {
- $::Wizard_splash=1;
- require my_gtk;
- my_gtk->import(qw(:wrappers));
- my $W = my_gtk->new(_("Network Configuration Wizard"));
- gtkadd($W->{window},
- gtkpack_(new Gtk::VBox(0, 0),
- 1, write_on_pixmap(gtkpng ("draknet_step"),
- 20,200,
- _("We are now going to configure the %s connection.",_($text)),
- ),
- 0, $W->create_okcancel(_("OK"))
- )
- );
- $W->main;
- $::Wizard_splash=0;
- } else {
- #- for i18n : %s is the type of connection of the list: (modem, isdn, adsl, cable, local network);
- $in->ask_okcancel(_("Network Configuration Wizard"), _("\n\n\nWe are now going to configure the %s connection.\n\n\nPress OK to continue.",_($_[0])), 1);
- }
- undef $::Wizard_no_previous;
-}
-
-sub init_globals {
- my ($in, $prefix) = @_;
- MDK::Common::Globals::init(
- in => $in,
- prefix => $prefix,
- connect_file => "/etc/sysconfig/network-scripts/net_cnx_up",
- disconnect_file => "/etc/sysconfig/network-scripts/net_cnx_down",
- connect_prog => "/etc/sysconfig/network-scripts/net_cnx_pg" );
-}
-
-sub main {
- my ($prefix, $netcnx, $netc, $mouse, $in, $intf, $first_time, $direct_fr, $noauto) = @_;
- init_globals ($in, $prefix);
- $netc->{minus_one}=0; #When one configure an eth in dhcp without gateway
- $::isInstall and $in->set_help('configureNetwork');
- $::isStandalone and read_net_conf($prefix, $netcnx, $netc); # REDONDANCE with intro. FIXME
- $netc->{NET_DEVICE}=$netcnx->{NET_DEVICE} if $netcnx->{NET_DEVICE}; # REDONDANCE with read_conf. FIXME
- $netc->{NET_INTERFACE}=$netcnx->{NET_INTERFACE} if $netcnx->{NET_INTERFACE}; # REDONDANCE with read_conf. FIXME
- network::read_all_conf($prefix, $netc ||= {}, $intf ||= {});
-
- modules::mergein_conf("$prefix/etc/modules.conf");
-
- my $direct_net_install;
- if ($first_time && $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs")) {
- (!($::expert || $noauto) or $in->ask_okcancel(_("Network Configuration"),
- _("Because you are doing a network installation, your network is already configured.
-Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
-"), 1)) and do {
- $netcnx->{type}='lan';
- output "$prefix$connect_file",
- qq(
-ifup eth0
-);
- output "$prefix$disconnect_file",
- qq(
-ifdown eth0
-);
- chmod 0755, "$prefix$disconnect_file";
- chmod 0755, "$prefix$connect_file";
- $direct_net_install = 1;
- goto step_5;
-};
- }
-
- $netc->{autodetection}=1;
- $netc->{autodetect}={};
-
- step_1:
- $::Wizard_no_previous=1;
- my @profiles=get_profiles();
- $in->ask_from(_("Network Configuration Wizard"),
- _("Welcome to The Network Configuration Wizard.
-
-We are about to configure your internet/network connection.
-If you don't want to use the auto detection, deselect the checkbox.
-"),
- [
- if_(@profiles > 1, { label => _("Choose the profile to configure"), val => \$netcnx->{PROFILE}, list => \@profiles }),
- { label => _("Use auto detection"), val => \$netc->{autodetection}, type => 'bool' },
- if_($::isStandalone, { label => _("Expert Mode"), val => \$::expert, type => 'bool' }),
- ]
- ) or goto step_5;
- undef $::Wizard_no_previous;
- set_profile($netcnx);
- if ($netc->{autodetection}) {
- my $w = $in->wait_message(_("Network Configuration Wizard"), _("Detecting devices..."));
- detect($netc->{autodetect}, $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs"));
- }
-
- step_2:
-
- my $set_default;
- my %conf;
- $conf{$_} = $netc->{autodetect}{$_} ? 1 : 0 foreach 'modem', 'adsl', 'cable', 'lan';
- $conf{isdn} = $netc->{autodetect}{isdn}{description} ? 1: 0;
- my @l = (
- [_("Normal modem connection"), $netc->{autodetect}{modem}, __("detected on port %s"), \$conf{modem}],
- [_("ISDN connection"), $netc->{autodetect}{isdn}{description}, __("detected %s"), \$conf{isdn}],
- [_("ADSL connection"), $netc->{autodetect}{adsl}, __("detected on interface %s"), \$conf{adsl}],
- [_("Cable connection"), $netc->{autodetect}{cable}, __("cable connection detected"), \$conf{cable}],
- [_("LAN connection"), $netc->{autodetect}{lan}, __("ethernet card(s) detected"), \$conf{lan}]
- );
- my $i=0;
- map { defined $set_default or do { $_->[1] and $set_default=$i; }; $i++; } @l;
- @l = (
-[_("Normal modem connection") . if_($netc->{autodetect}{modem}, " - " . _("detected on port %s", $netc->{autodetect}{modem})), \$conf{modem}],
-[_("ISDN connection") . if_($netc->{autodetect}{isdn}{description}, " - " . _("detected %s", $netc->{autodetect}{isdn}{description})), \$conf{isdn}],
-[_("ADSL connection") . if_($netc->{autodetect}{adsl}, " - " . _("detected on interface %s", $netc->{autodetect}{adsl})), \$conf{adsl}],
-[_("Cable connection") . if_($netc->{autodetect}{cable}, " - " . _("cable connection detected")), \$conf{cable}],
-[_("LAN connection") . if_($netc->{autodetect}{lan}, " - " . _("ethernet card(s) detected")), \$conf{lan}]
-);
- $::isInstall and $in->set_help('configureNetwork');
- my $e = $in->ask_from(_("Network Configuration Wizard"), _("Choose the connection you want to configure"),
- [ map { { label => $_->[0], val => $_->[1], type => 'bool' } } @l ],
- changed => sub {
- return if !$netc->{autodetection};
- my $c = 0;
-#- $conf{adsl} and $c++;
- $conf{cable} and $c++;
- my $a = keys(%{$netc->{autodetect}{lan}});
- 0 < $a && $a <= $c and $conf{lan} = undef;
- }
- ) or goto step_1;
-
-# load_conf ($netcnx, $netc, $intf);
- $conf{modem} and do { pre_func("modem"); require network::modem; network::modem::configure($netcnx, $mouse, $netc) or goto step_2 };
- $conf{isdn} and do { pre_func("isdn"); require network::isdn; network::isdn::configure($netcnx, $netc) or goto step_2 };
- $conf{adsl} and do { pre_func("adsl"); require network::adsl; network::adsl::configure($netcnx, $netc, $intf, $first_time) or goto step_2};
- $conf{cable} and do { pre_func("cable"); require network::ethernet; network::ethernet::configure_cable($netcnx, $netc, $intf, $first_time) or goto step_2; $netconnect::need_restart_network = 1; };
- $conf{lan} and do { pre_func("local network"); require network::ethernet; network::ethernet::configure_lan($netcnx, $netc, $intf, $first_time) or goto step_2; $netconnect::need_restart_network = 1; };
-
- step_2_1:
- my $nb = keys %{$netc->{internet_cnx}};
- if ($nb < 1) {
- } elsif ($nb > 1) {
- $in->ask_from(_("Network Configuration Wizard"),
- _("You have configured multiple ways to connect to the Internet.\nChoose the one you want to use.\n\n" . if_(!$::isStandalone, "You may want to configure some profiles after the installation, in the Mandrake Control Center")),
- [ { label => _("Internet connection"), val => \$netc->{internet_cnx_choice}, list => [ keys %{$netc->{internet_cnx}} ]} ]
- ) or goto step_2;
- } elsif ($nb == 1) {
- $netc->{internet_cnx_choice} = (keys %{$netc->{internet_cnx}})[0];
- }
- member($netc->{internet_cnx_choice}, ('adsl', 'isdn')) and
- $netc->{at_boot} = $in->ask_yesorno(_("Network Configuration Wizard"), _("Do you want to start the connection at boot?"));
- if ($netc->{internet_cnx_choice} ) {
- write_cnx_script($netc);
- $netcnx->{type} = $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{type};
- } else {
- unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_up";
- unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_down";
- undef $netc->{NET_DEVICE};
- }
-
- my $success = 1;
- network::configureNetwork2($in, $prefix, $netc, $intf);
- my $network_configured = 1;
-
- if ($netconnect::need_restart_network && $::isStandalone and ($::expert or $in->ask_yesorno(_("Network configuration"),
- _("The network needs to be restarted"), 1))) {
-#- run_program::rooted($prefix, "/etc/rc.d/init.d/network stop");
- if (!run_program::rooted($prefix, "/etc/rc.d/init.d/network restart")) {
- $success = 0;
- $in->ask_okcancel(_("Network Configuration"), _("A problem occured while restarting the network: \n\n%s", `/etc/rc.d/init.d/network restart`), 0);
- }
- }
-
- write_initscript();
- $::isStandalone && member($netc->{internet_cnx_choice}, ('modem', 'adsl', 'isdn')) and
- $success = ask_connect_now($netc->{internet_cnx_choice});
-
- step_3:
-
- my $m = $success ? _("Congratulations, the network and Internet configuration is finished.
-The configuration will now be applied to your system.
-
-") . if_($::isStandalone && $in->isa('interactive_gtk'),
-_("After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."))
- : _("Problems occured during configuration.
-Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.");
- if ($::isWizard) {
- $::Wizard_no_previous=1;
- $::Wizard_finished=1;
- $in->ask_okcancel(_("Network Configuration"), $m, 1);
- undef $::Wizard_no_previous;
- undef $::Wizard_finished;
- } else { $::isStandalone and $in->ask_warn('', $m ); }
-
- step_5:
-
- $network_configured or network::configureNetwork2($in, $prefix, $netc, $intf);
-
- if ($netcnx->{type} =~ /modem/ || $netcnx->{type} =~ /isdn_external/) {
- output "$prefix$connect_prog",
- qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-if [ -e /usr/bin/kppp ]; then
-/sbin/route del default
-/usr/bin/kppp &
-else
-/usr/sbin/net_monitor --connect
-fi
-else
-$connect_file
-fi
-);
- } elsif ($netcnx->{type}) {
- output "$prefix$connect_prog",
- qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-/usr/sbin/net_monitor --connect
-else
-$connect_file
-fi
-);
- } else {
- output "$prefix$connect_prog",
- qq(
-#!/bin/bash
-/usr/sbin/draknet
-);
- }
- if ($direct_net_install) {
- output "$prefix$connect_prog",
- qq(
-#!/bin/bash
-if [ -n "\$DISPLAY" ]; then
-/usr/sbin/net_monitor --connect
-else
-$connect_file
-fi
-);
- }
- chmod 0755, "$prefix$connect_prog";
- $netcnx->{$_}=$netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE);
-
- $netcnx->{NET_INTERFACE} and set_net_conf($netcnx, $netc);
- $netcnx->{type} =~ /adsl/ or system("/sbin/chkconfig --del adsl 2> /dev/null");
- save_conf($netcnx, $netc, $intf);
-
-#- if ($netc->{NET_DEVICE} and $netc->{NETWORKING} ne 'no' and $::isStandalone and $::expert) {
-#- exists $netc->{nb_cards} or do {
-#- any::load_category($in, 'network/main|usb', !$::expert, 1);
-#- $netc->{nb_cards} = listlength(detect_devices::getNet());
-#- };
-#- ($netc->{nb_cards} - $netc->{minus_one} - (get_net_device($prefix) =~ /eth.+/ ? 1 : 0) > 0) and $in->ask_okcancel(_("Network Configuration"),
-#-_("Now that your Internet connection is configured,
-#-your computer can be configured to share its Internet connection.
-#-Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).
-#-
-#-Would you like to setup the Internet Connection Sharing?
-#-"), 1) and system("/usr/sbin/drakgw --direct");
-#- }
-}
-
-sub save_conf {
- my ($netcnx, $netc, $intf)=@_;
- my $adsl;
- my $modem;
- my $isdn;
- $netcnx->{type} =~ /adsl/ and $adsl=$netcnx->{$netcnx->{type}};
- $netcnx->{type} eq 'isdn_external' || $netcnx->{type} eq 'modem' and $modem=$netcnx->{$netcnx->{type}};
- $netcnx->{type} eq 'isdn_internal' and $isdn=$netcnx->{$netcnx->{type}};
- modules::load_category('network/main|usb');
- require network::ethernet;
- network::ethernet->import;
- my @all_cards = conf_network_card_backend ($netc, $intf, undef, undef, undef, undef);
-
- $intf = { %$intf };
-
- output("$prefix/etc/sysconfig/network-scripts/draknet_conf",
- "SystemName=" . do { $netc->{HOSTNAME} =~ /([^\.]*)\./; $1 } . "
-DomainName=" . do { $netc->{HOSTNAME} =~ /\.(.*)/; $1 } . "
-InternetAccessType=" . do { if ($netcnx->{type}) { $netcnx->{type}; } else { $netc->{GATEWAY} ? "lan" : ""; } } . "
-InternetInterface=" . ($netc->{GATEWAY} && (!$netcnx->{type} || $netcnx->{type} eq 'lan') ? $netc->{NET_DEVICE} : $netcnx->{NET_INTERFACE}) . "
-InternetGateway=$netc->{GATEWAY}
-DNSPrimaryIP=$netc->{dnsServer}
-DNSSecondaryIP=$netc->{dnsServer2}
-DNSThirdIP=$netc->{dnsServer3}
-AdminInterface=
-
-" . join ('', map {
-"Eth${_}Known=" . ($intf->{"eth$_"}->{DEVICE} eq "eth$_" ? 'true' : 'false') . "
-Eth${_}IP=" . $intf->{"eth$_"}{IPADDR} . "
-Eth${_}Mask=" . $intf->{"eth$_"}{NETMASK} . "
-Eth${_}Mac=
-Eth${_}BootProto=" . $intf->{"eth$_"}{BOOTPROTO} . "
-Eth${_}OnBoot=" . $intf->{"eth$_"}{ONBOOT} . "
-Eth${_}Hostname=$netc->{HOSTNAME}
-Eth${_}HostAlias=" . do { $netc->{HOSTNAME} =~ /([^\.]*)\./; $1 } . "
-Eth${_}Driver=$all_cards[$_]->[1]
-Eth${_}Irq=
-Eth${_}Port=
-Eth${_}DHCPClient=" . ($intf->{"eth$_"}{BOOTPROTO} eq 'dhcp' ? $netcnx->{dhcp_client} : '') . "
-Eth${_}DHCPServerName=" . ($intf->{"eth$_"}{BOOTPROTO} eq 'dhcp' ? $netc->{HOSTNAME} : '') . "\n"
- } (0..9)) .
-"
-
-ISDNDriver=$isdn->{driver}
-ISDNDeviceType=$isdn->{type}
-ISDNIrq=$isdn->{irq}
-ISDNMem=$isdn->{mem}
-ISDNIo=$isdn->{io}
-ISDNIo0=$isdn->{io0}
-ISDNIo1=$isdn->{io1}
-ISDNProtocol=$isdn->{protocol}
-ISDNCardDescription=$isdn->{description}
-ISDNCardVendor=$isdn->{vendor}
-ISDNId=$isdn->{id}
-ISDNProvider=$netc->{DOMAINNAME2}
-ISDNProviderPhone=$isdn->{phone_out}
-ISDNProviderDomain=" . do { $netc->{DOMAINNAME2} =~ /\.(.*)/; $1} . "
-ISDNProviderDNS1=$netc->{dnsServer2}
-ISDNProviderDNS2=$netc->{dnsServer3}
-ISDNDialing=$isdn->{dialing_mode}
-ISDNSpeed=$isdn->{speed}
-ISDNTimeout=$isdn->{huptimeout}
-ISDNHomePhone=$isdn->{phone_in}
-ISDNLogin=$isdn->{login}
-ISDNPassword=$isdn->{passwd}
-ISDNConfirmPassword=$isdn->{passwd2}
-
-PPPInterfacesList=
-PPPDevice=$modem->{device}
-PPPDeviceSpeed=
-PPPConnectionName=$modem->{connection}
-PPPProviderPhone=$modem->{phone}
-PPPProviderDomain=$modem->{domain}
-PPPProviderDNS1=$modem->{dns1}
-PPPProviderDNS2=$modem->{dns2}
-PPPLogin=$modem->{login}
-PPPPassword=$modem->{passwd}
-PPPConfirmPassword=$modem->{passwd}
-PPPAuthentication=$modem->{auth}
-PPPSpecialCommand=" . ($netcnx->{type} eq 'isdn_external' ? $netcnx->{isdn_external}{special_command} : '' ) . "
-
-ADSLInterfacesList=
-ADSLModem=" . q( # Obsolete information. Please don't use it.) . "
-ADSLType=" . ($netcnx->{type} =~ /adsl/ ? $netcnx->{type} : '') . "
-ADSLProviderDomain=$netc->{DOMAINNAME2}
-ADSLProviderDNS1=$netc->{dnsServer2}
-ADSLProviderDNS2=$netc->{dnsServer3}
-ADSLLogin=$adsl->{login}
-ADSLPassword=$adsl->{passwd}
-DOMAINNAME2=$netc->{DOMAINNAME2}"
- );
- chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf";
- my $a = $netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default";
- cp_af("$prefix/etc/sysconfig/network-scripts/draknet_conf", "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $a);
- chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf";
- chmod 0600, "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $a;
- foreach ( ["$prefix$connect_file", "up"],
- ["$prefix$disconnect_file", "down"],
- ["$prefix$connect_prog", "prog"],
- ["$prefix/etc/ppp/ioptions1B", "iop1B"],
- ["$prefix/etc/ppp/ioptions2B", "iop2B"],
- ["$prefix/etc/isdn/isdn1B.conf", "isdn1B"],
- ["$prefix/etc/isdn/isdn2B.conf", "isdn2B"],
- ["$prefix/etc/resolv.conf", "resolv"],
- ["$prefix/etc/ppp/peers/adsl", "speedtouch"],
- ) {
- my $file = "$prefix/etc/sysconfig/network-scripts/net_" . $_->[1] . "." . $a;
- -e ($_->[0]) and cp_af($_->[0], $file) and chmod 0755, $file;
- }
-}
-
-sub set_profile {
- my ($netcnx, $profile) = @_;
- $profile ||= $netcnx->{PROFILE};
- $profile or return;
- my $f = "$prefix/etc/sysconfig/network-scripts/draknet_conf";
- -e ($f . "." . $profile) or return;
- $netcnx->{PROFILE}=$profile;
- cp_af($f . "." . $profile, $f);
- foreach ( ["$prefix$connect_file", "up"],
- ["$prefix$disconnect_file", "down"],
- ["$prefix$connect_prog", "prog"],
- ["$prefix/etc/ppp/ioptions1B", "iop1B"],
- ["$prefix/etc/ppp/ioptions2B", "iop2B"],
- ["$prefix/etc/isdn/isdn1B.conf", "isdn1B"],
- ["$prefix/etc/isdn/isdn2B.conf", "isdn2B"],
- ["$prefix/etc/resolv.conf", "resolv"],
- ["$prefix/etc/ppp/peers/adsl", "speedtouch"],
- ) {
- my $c = "$prefix/etc/sysconfig/network-scripts/net_" . $_->[1] . "." . $profile;
- -e ($c) and cp_af($c, $_->[0]);
- }
-}
-
-sub del_profile {
- my ($netcnx, $profile) = @_;
- $profile or return;
- $profile eq "default" and return;
- rm_rf("$prefix/etc/sysconfig/network-scripts/draknet_conf." . $profile);
- rm_rf(glob_("$prefix/etc/sysconfig/network-scripts/net_{up,down,prog,iop1B,iop2B,isdn1B,isdn2B,resolv,speedtouch}." . $profile));
-}
-
-sub add_profile {
- my ($netcnx, $profile) = @_;
- $profile or return;
- $profile eq "default" and return;
- my $cmd1 = "$prefix/etc/sysconfig/network-scripts/draknet_conf." . ($netcnx->{PROFILE} ? $netcnx->{PROFILE} : "default");
- my $cmd2 = "$prefix/etc/sysconfig/network-scripts/draknet_conf." . $profile;
- cp_af($cmd1, $cmd2);
-}
-
-sub get_profiles {
- my @a;
- my $i=0;
- foreach (glob("/etc/sysconfig/network-scripts/draknet_conf.*")) {
- s/.*\.//;
- $a[$i] = $_;
- $i++;
- }
- @a;
-}
-
-sub load_conf {
- my ($netcnx, $netc, $intf)=@_;
- my $adsl_pptp={};
- my $adsl_pppoe={};
- my $modem={};
- my $isdn_external={};
- my $isdn={};
- my $system_name;
- my $domain_name;
-
- if (-e "$prefix/etc/sysconfig/network-scripts/draknet_conf") {
- foreach (cat_("$prefix/etc/sysconfig/network-scripts/draknet_conf")) {
- /^DNSPrimaryIP=(.*)$/ and $netc->{dnsServer} = $1;
- /^DNSSecondaryIP=(.*)$/ and $netc->{dnsServer2} = $1;
- /^DNSThirdIP=(.*)$/ and $netc->{dnsServer3} = $1;
- /^InternetAccessType=(.*)$/ and $netcnx->{type} = $1;
- /^InternetInterface=(.*)$/ and $netcnx->{NET_INTERFACE} = $1;
- /^InternetGateway=(.*)$/ and $netc->{GATEWAY} = $1;
- /^SystemName=(.*)$/ and $system_name = $1;
- /^DomainName=(.*)$/ and $domain_name = $1;
- /^Eth([0-9])Known=true$/ and $intf->{"eth$1"}->{DEVICE} = "eth$1";
- /^Eth([0-9])IP=(.*)$/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{IPADDR} = $2;
- /^Eth([0-9])Mask=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{NETMASK} = $2;
- /^Eth([0-9])BootProto=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{BOOTPROTO} = $2;
- /^Eth([0-9])OnBoot=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{ONBOOT} = $2;
- /^Eth([0-9])Hostname=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $netc->{HOSTNAME} = $2;
- /^Eth([0-9])Driver=(.*)\n/ && $intf->{"eth$1"}->{DEVICE} and $intf->{"eth$1"}{driver} = $2;
- /^ISDNDriver=(.*)$/ and $isdn->{driver} = $1;
- /^ISDNDeviceType=(.*)$/ and $isdn->{type} = $1;
- /^ISDNIrq=(.*)/ and $isdn->{irq} = $1;
- /^ISDNMem=(.*)$/ and $isdn->{mem} = $1;
- /^ISDNIo=(.*)$/ and $isdn->{io} = $1;
- /^ISDNIo0=(.*)$/ and $isdn->{io0} = $1;
- /^ISDNIo1=(.*)$/ and $isdn->{io1} = $1;
- /^ISDNProtocol=(.*)$/ and $isdn->{protocol} = $1;
- /^ISDNCardDescription=(.*)$/ and $isdn->{description} = $1;
- /^ISDNCardVendor=(.*)$/ and $isdn->{vendor} = $1;
- /^ISDNId=(.*)$/ and $isdn->{id} = $1;
- /^ISDNProviderPhone=(.*)$/ and $isdn->{phone_out} = $1;
- /^ISDNDialing=(.*)$/ and $isdn->{dialing_mode} = $1;
- /^ISDNISDNSpeed=(.*)$/ and $isdn->{speed} = $1;
- /^ISDNTimeout=(.*)$/ and $isdn->{huptimeout} = $1;
- /^ISDNHomePhone=(.*)$/ and $isdn->{phone_in} = $1;
- /^ISDNLogin=(.*)$/ and $isdn->{login} = $1;
- /^ISDNPassword=(.*)$/ and $isdn->{passwd} = $1;
- /^ISDNConfirmPassword=(.*)$/ and $isdn->{passwd2} = $1;
-
- /^PPPDevice=(.*)$/ and $modem->{device} = $1;
- /^PPPConnectionName=(.*)$/ and $modem->{connection} = $1;
- /^PPPProviderPhone=(.*)$/ and $modem->{phone} = $1;
- /^PPPProviderDomain=(.*)$/ and $modem->{domain} = $1;
- /^PPPProviderDNS1=(.*)$/ and $modem->{dns1} = $1;
- /^PPPProviderDNS2=(.*)$/ and $modem->{dns2} = $1;
- /^PPPLogin=(.*)$/ and $modem->{login} = $1;
- /^PPPPassword=(.*)$/ and $modem->{passwd} = $1;
- /^PPPAuthentication=(.*)$/ and $modem->{auth} = $1;
- if (/^PPPSpecialCommand=(.*)$/) {
- $netcnx->{type} eq 'isdn_external' and $netcnx->{$netcnx->{type}}{special_command} = $1;
- }
- /^ADSLLogin=(.*)$/ and $adsl_pppoe->{login} = $1;
- /^ADSLPassword=(.*)$/ and $adsl_pppoe->{passwd} = $1;
- /^DOMAINNAME2=(.*)$/ and $netc->{DOMAINNAME2} = $1;
- }
- }
- $system_name && $domain_name and $netc->{HOSTNAME}=join ('.', $system_name, $domain_name);
- $adsl_pptp->{$_}=$adsl_pppoe->{$_} foreach ('login', 'passwd', 'passwd2');
- $isdn_external->{$_}=$modem->{$_} foreach ('device', 'connection', 'phone', 'domain', 'dns1', 'dns2', 'login', 'passwd', 'auth');
- $netcnx->{adsl_pptp}=$adsl_pptp;
- $netcnx->{adsl_pppoe}=$adsl_pppoe;
- $netcnx->{modem}=$modem;
- $netcnx->{modem}=$isdn_external;
- $netcnx->{isdn_internal}=$isdn;
- -e "$prefix/etc/sysconfig/network" and put_in_hash($netc,network::read_conf("$prefix/etc/sysconfig/network"));
- foreach (glob_("$prefix/etc/sysconfig/ifcfg-*")) {
- my $l = network::read_interface_conf($_);
- $intf->{$l->{DEVICE}} = $l;
- }
- my $file = "$prefix/etc/resolv.conf";
- if (-e $file) {
- put_in_hash($netc, network::read_resolv_conf($file));
- }
-}
-
-sub get_net_device {
- ${{ getVarsFromSh("/etc/sysconfig/draknet") }}{NET_DEVICE};
-}
-
-sub read_net_conf {
- my ($prefix, $netcnx, $netc)=@_;
- add2hash($netcnx, { getVarsFromSh("$prefix/etc/sysconfig/draknet") });
- $netc->{$_} = $netcnx->{$_} foreach 'NET_DEVICE', 'NET_INTERFACE';
- $netcnx->{$netcnx->{type}}||={};
- add2hash($netcnx->{$netcnx->{type}}, { getVarsFromSh("$prefix/etc/sysconfig/draknet." . $netcnx->{type}) });
-}
-
-sub set_net_conf {
- my ($netcnx, $netc)=@_;
- setVarsInShMode("$prefix/etc/sysconfig/draknet", 0600, $netcnx, "NET_DEVICE", "NET_INTERFACE", "type", "PROFILE" );
- setVarsInShMode("$prefix/etc/sysconfig/draknet." . $netcnx->{type}, 0600, $netcnx->{$netcnx->{type}}); #- doesn't work, don't know why
- setVarsInShMode("$prefix/etc/sysconfig/draknet.netc", 0600, $netc); #- doesn't work, don't know why
-}
-
-sub start_internet {
- my ($o) = @_;
- init_globals ($o, $o->{prefix});
- run_program::rooted($prefix, $connect_file);
-}
-
-sub stop_internet {
- my ($o) = @_;
- init_globals ($o, $o->{prefix});
- run_program::rooted($prefix, $disconnect_file);
-}
-
-#---------------------------------------------
-# WONDERFULL pad
-#---------------------------------------------
-1;
diff --git a/perl-install/network/network.pm b/perl-install/network/network.pm
deleted file mode 100644
index 60d8ffd41..000000000
--- a/perl-install/network/network.pm
+++ /dev/null
@@ -1,460 +0,0 @@
-package network::network; # $Id$wir
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use Socket;
-
-use common;
-use detect_devices;
-use run_program;
-use any;
-use log;
-use vars qw(@ISA @EXPORT);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(resolv configureNetworkIntf netmask dns is_ip masked_ip findIntf addDefaultRoute all write_interface_conf read_all_conf dnsServers guessHostname configureNetworkNet read_resolv_conf getVarsFromSh read_interface_conf add2hosts gateway configureNetwork2 write_conf sethostname miscellaneousNetwork down_it read_conf write_resolv_conf up_it);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub read_conf {
- my ($file) = @_;
- my %netc = getVarsFromSh($file);
- \%netc;
-}
-
-sub read_resolv_conf {
- my ($file) = @_;
- my @l = qw(dnsServer dnsServer2 dnsServer3);
- my %netc;
-
- local *F; open F, $file or die "cannot open $file: $!";
- local $_;
- while (<F>) {
- /^\s*nameserver\s+(\S+)/ and $netc{shift @l} = $1;
- }
- \%netc;
-}
-
-sub read_interface_conf {
- my ($file) = @_;
- my %intf = getVarsFromSh($file) or die "cannot open file $file: $!";
-
- $intf{BOOTPROTO} ||= 'static';
- $intf{isPtp} = $intf{NETWORK} eq '255.255.255.255';
- $intf{isUp} = 1;
- \%intf;
-}
-
-sub up_it {
- my ($prefix, $intfs) = @_;
- $_->{isUp} and return foreach values %$intfs;
- my $f = "/etc/resolv.conf"; symlink "$prefix/$f", $f;
- run_program::rooted($prefix, "/etc/rc.d/init.d/network", "start");
- $_->{isUp} = 1 foreach values %$intfs;
-}
-
-sub down_it {
- my ($prefix, $intfs) = @_;
- run_program::rooted($prefix, "/etc/rc.d/init.d/network", "stop");
- $_->{isUp} = 1 foreach values %$intfs;
-}
-
-sub write_conf {
- my ($file, $netc) = @_;
-
- if ($netc->{HOSTNAME}) {
- $netc->{HOSTNAME} =~ /\.(.*)$/;
- $1 and $netc->{DOMAINNAME} = $1;
- }
- ($netc->{DOMAINNAME}) ||= 'localdomain';
- add2hash($netc, {
- NETWORKING => "yes",
- FORWARD_IPV4 => "false",
- HOSTNAME => "localhost.$netc->{DOMAINNAME}",
- });
-
- setVarsInSh($file, $netc, qw(NETWORKING FORWARD_IPV4 DHCP_HOSTNAME HOSTNAME DOMAINNAME GATEWAY GATEWAYDEV NISDOMAIN));
-}
-
-sub write_resolv_conf {
- my ($file, $netc) = @_;
-
- #- get the list of used dns.
- my %used_dns; @used_dns{$netc->{dnsServer}, $netc->{dnsServer2}, $netc->{dnsServer3}} = (1, 2, 3);
-
- unless ($netc->{DOMAINNAME} || $netc->{DOMAINNAME2} || keys %used_dns > 0) {
- unlink($file);
- log::l("neither domain name nor dns server are configured");
- return 0;
- }
-
- my (%search, %dns, @unknown);
- local *F; open F, $file;
- local $_;
-#- my $options;
- while (<F>) {
-#- if (/^[\s]*(options\s+[^#]*).*$/) { $options = $1; $options =~ s/timeout:\d+/timeout:1/; next }
- /^[#\s]*search\s+(.*?)\s*$/ and $search{$1} = $., next;
- /^[#\s]*nameserver\s+(.*?)\s*$/ and $dns{$1} = $., next;
- /^.*# ppp temp entry\s*$/ and next;
- /^[#\s]*(\S.*?)\s*$/ and push @unknown, $1;
- }
-#- $options ||= "options timeout:1";
-
- close F; open F, ">$file" or die "cannot write $file: $!";
- print F "# search $_\n" foreach grep { $_ ne "$netc->{DOMAINNAME} $netc->{DOMAINNAME2}" } sort { $search{$a} <=> $search{$b} } keys %search;
- print F "search $netc->{DOMAINNAME} $netc->{DOMAINNAME2}\n" if ($netc->{DOMAINNAME} || $netc->{DOMAINNAME2});
-#- print F "$options\n\n";
- print F "# nameserver $_\n" foreach grep { ! exists $used_dns{$_} } sort { $dns{$a} <=> $dns{$b} } keys %dns;
- print F "nameserver $_\n" foreach sort { $used_dns{$a} <=> $used_dns{$b} } grep { $_ } keys %used_dns;
- print F "\n";
- print F "# $_\n" foreach @unknown;
- print F "\n";
- print F "# ppp temp entry\n";
-
- #-res_init(); # reinit the resolver so DNS changes take affect
- 1;
-}
-
-sub write_interface_conf {
- my ($file, $intf, $prefix) = @_;
-
- my @ip = split '\.', $intf->{IPADDR};
- my @mask = split '\.', $intf->{NETMASK};
- my $hwaddr;
- $::o->{miscellaneous}{track_network_id} and $hwaddr = -e "$prefix/sbin/ip" && `LC_ALL= LANG= $prefix/sbin/ip -o link show $intf->{DEVICE} 2>/dev/null`;
- if ($hwaddr) { chomp $hwaddr; $hwaddr =~ s/.*link\/ether\s([0-9a-z:]+)\s.*/$1/; }
- $hwaddr and $intf->{HWADDR} = undef;
- add2hash($intf, {
- BROADCAST => join('.', mapn { int $_[0] | ~int $_[1] & 255 } \@ip, \@mask),
- NETWORK => join('.', mapn { int $_[0] & $_[1] } \@ip, \@mask),
- ONBOOT => bool2yesno(!member($intf->{DEVICE}, map { $_->{device} } detect_devices::probeall())),
- if_($::o->{miscellaneous}{track_network_id}, HWADDR => $hwaddr)
- });
- setVarsInSh($file, $intf, qw(DEVICE BOOTPROTO IPADDR NETMASK NETWORK BROADCAST ONBOOT HWADDR), ($intf->{wireless_eth}) ? qw(WIRELESS_MODE WIRELESS_ESSID WIRELESS_NWID WIRELESS_FREQ WIRELESS_SENS WIRELESS_RATE WIRELESS_ENC_KEY WIRELESS_RTS WIRELESS_FRAG WIRELESS_IWCONFIG WIRELESS_IWSPY WIRELESS_IWPRIV) : ());
-}
-
-sub add2hosts {
- my ($file, $hostname, @ips) = @_;
- my %l;
- $l{$_} = $hostname foreach @ips;
-
- local *F;
- if (-e $file) {
- open F, $file or die "cannot open $file: $!";
- /\s*(\S+)(.*)/ and $l{$1} ||= $2 foreach <F>;
- }
- log::l("writing host information to $file");
- open F, ">$file" or die "cannot write $file: $!";
- while (my ($ip, $v) = each %l) {
- $ip or next;
- print F "$ip";
- if ($v =~ /^\s/) {
- print F $v;
- } else {
- print F "\t\t$v";
- print F " $1" if $v =~ /(.*?)\./;
- }
- print F "\n";
- }
-}
-
-# The interface/gateway needs to be configured before this will work!
-sub guessHostname {
- my ($prefix, $netc, $intf) = @_;
-
- $intf->{isUp} && dnsServers($netc) or return 0;
- $netc->{HOSTNAME} && $netc->{DOMAINNAME} and return 1;
-
- write_resolv_conf("$prefix/etc/resolv.conf", $netc);
-
- my $name = gethostbyaddr(Socket::inet_aton($intf->{IPADDR}), AF_INET) or log::l("reverse name lookup failed"), return 0;
-
- log::l("reverse name lookup worked");
-
- add2hash($netc, { HOSTNAME => $name });
- 1;
-}
-
-sub addDefaultRoute {
- my ($netc) = @_;
- c::addDefaultRoute($netc->{GATEWAY}) if $netc->{GATEWAY};
-}
-
-sub sethostname {
- my ($netc) = @_;
- syscall_('sethostname', $netc->{HOSTNAME}, length $netc->{HOSTNAME}) or log::l("sethostname failed: $!");
-}
-
-sub resolv($) {
- my ($name) = @_;
- is_ip($name) and return $name;
- my $a = join(".", unpack "C4", (gethostbyname $name)[4]);
- #-log::l("resolved $name in $a");
- $a;
-}
-
-sub dnsServers {
- my ($netc) = @_;
- my %used_dns; @used_dns{$netc->{dnsServer}, $netc->{dnsServer2}, $netc->{dnsServer3}} = (1, 2, 3);
- sort { $used_dns{$a} <=> $used_dns{$b} } grep { $_ } keys %used_dns;
-}
-
-sub findIntf {
- my ($intf, $device) = @_;
- $intf->{$device}->{DEVICE} = $device;
- $intf->{$device};
-}
-#PAD \s* a la fin
-my $ip_regexp = qr/^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/;
-sub is_ip {
- my ($ip) = @_;
- return 0 unless $ip =~ $ip_regexp;
- my @fields = ($1, $2, $3, $4);
- foreach (@fields) {
- return 0 if $_ < 0 || $_ > 255;
- }
- return 1;
-}
-
-sub netmask {
- my ($ip) = @_;
- return "255.255.255.0" unless is_ip($ip);
- $ip =~ $ip_regexp;
- if ($1 >= 1 && $1 < 127) {
- return "255.0.0.0"; #-1.0.0.0 to 127.0.0.0
- } elsif ($1 >= 128 && $1 <= 191 ){
- return "255.255.0.0"; #-128.0.0.0 to 191.255.0.0
- } elsif ($1 >= 192 && $1 <= 223) {
- return "255.255.255.0";
- } else {
- return "255.255.255.255"; #-experimental classes
- }
-}
-
-sub masked_ip {
- my ($ip) = @_;
- return "" unless is_ip($ip);
- my @mask = netmask($ip) =~ $ip_regexp;
- my @ip = $ip =~ $ip_regexp;
- for (my $i = 0; $i < @ip; $i++) {
- $ip[$i] &= int $mask[$i];
- }
- join(".", @ip);
-}
-
-sub dns {
- my ($ip) = @_;
- my $mask = masked_ip($ip);
- my @masked = masked_ip($ip) =~ $ip_regexp;
- $masked[3] = 2;
- join (".", @masked);
-
-}
-sub gateway {
- my ($ip) = @_;
- my @masked = masked_ip($ip) =~ $ip_regexp;
- $masked[3] = 1;
- join (".", @masked);
-
-}
-
-sub configureNetworkIntf {
- my ($netc, $in, $intf, $net_device, $skip, $module) = @_;
- my $text;
- my @wireless_modules = qw(aironet_cs aironet4500_cs hermes airo orinico_cs orinico airo_cs netwave_cs ray_cs wavelan_cs wvlan_cs airport);
- my $flag = 0;
- foreach (@wireless_modules) {
- $module =~ /$_/ and $flag =1;
- }
- if ($flag) {
- $intf->{wireless_eth} = 1;
- $netc->{wireless_eth} = 1;
- $intf->{WIRELESS_MODE} = "Managed";
- $intf->{WIRELESS_ESSID} = "any";
-#- $intf->{WIRELESS_NWID} = "";
-#- $intf->{WIRELESS_FREQ} = "";
-#- $intf->{WIRELESS_SENS} = "";
-#- $intf->{WIRELESS_RATE} = "";
-#- $intf->{WIRELESS_ENC_KEY} = "";
-#- $intf->{WIRELESS_RTS} = "";
-#- $intf->{WIRELESS_FRAG} = "";
-#- $intf->{WIRELESS_IWCONFIG} = "";
-#- $intf->{WIRELESS_IWSPY} = "";
-#- $intf->{WIRELESS_IWPRIV} = "";
- }
- if ($net_device eq $intf->{DEVICE}) {
- $skip and return 1;
- $text = _("WARNING: this device has been previously configured to connect to the Internet.
-Simply accept to keep this device configured.
-Modifying the fields below will override this configuration.");
- }
- else {
- $text = _("Please enter the IP configuration for this machine.
-Each item should be entered as an IP address in dotted-decimal
-notation (for example, 1.2.3.4).");
- }
- my $pump = $intf->{BOOTPROTO} =~ /^(dhcp|bootp)$/;
- delete $intf->{NETWORK};
- delete $intf->{BROADCAST};
- my $onboot = 1;
- my @fields = qw(IPADDR NETMASK);
- $::isStandalone or $in->set_help('configureNetworkIP');
- $in->ask_from(_("Configuring network device %s", $intf->{DEVICE}),
- (_("Configuring network device %s", $intf->{DEVICE}) . ( $module ? _(" (driver %s)", $module) : '' ) ."\n\n") .
- $text,
- [ { label => _("IP address"), val => \$intf->{IPADDR}, disabled => sub { $pump } },
- { label => _("Netmask"), val => \$intf->{NETMASK}, disabled => sub { $pump } },
- { label => _("Automatic IP"), val => \$pump, type => "bool", text => _("(bootp/dhcp)") },
- if_($::expert, { label => _("Start at boot"), val => \$onboot, type => "bool" }),
- if_($intf->{wireless_eth},
- { label => "WIRELESS_MODE", val => \$intf->{WIRELESS_MODE}, list => [ "Ad-hoc", "Managed", "Master", "Repeater", "Secondary", "Auto"] },
- { label => "WIRELESS_ESSID", val => \$intf->{WIRELESS_ESSID} },
- { label => "WIRELESS_NWID", val => \$intf->{WIRELESS_NWID} },
- { label => "WIRELESS_FREQ", val => \$intf->{WIRELESS_FREQ} },
- { label => "WIRELESS_SENS", val => \$intf->{WIRELESS_SENS} },
- { label => "WIRELESS_RATE", val => \$intf->{WIRELESS_RATE} },
- { label => "WIRELESS_ENC_KEY", val => \$intf->{WIRELESS_ENC_KEY} },
- { label => "WIRELESS_RTS", val => \$intf->{WIRELESS_RTS} },
- { label => "WIRELESS_FRAG", val => \$intf->{WIRELESS_FRAG} },
- { label => "WIRELESS_IWCONFIG", val => \$intf->{WIRELESS_IWCONFIG} },
- { label => "WIRELESS_IWSPY", val => \$intf->{WIRELESS_IWSPY} },
- { label => "WIRELESS_IWPRIV", val => \$intf->{WIRELESS_IWPRIV} }
- ),
- ],
- complete => sub {
- $intf->{BOOTPROTO} = $pump ? "dhcp" : "static";
- return 0 if $pump;
- for (my $i = 0; $i < @fields; $i++) {
- unless (is_ip($intf->{$fields[$i]})) {
- $in->ask_warn('', _("IP address should be in format 1.2.3.4"));
- return (1,$i);
- }
- return 0;
- }
- if ($intf->{WIRELESS_FREQ} !~ /[0-9.]*[kGM]/) {
- $in->ask_warn('', _('Freq should have the suffix k, M or G (for example, "2.46G" for 2.46 GHz frequency), or add enough \'0\'.'));
- return (1,6);
- }
- if ($intf->{WIRELESS_RATE} !~ /[0-9.]*[kGM]/) {
- $in->ask_warn('', _('Rate should have the suffix k, M or G (for example, "11M" for 11M), or add enough \'0\'.'));
- return (1,8);
- }
- },
- focus_out => sub {
- $intf->{NETMASK} ||= netmask($intf->{IPADDR}) unless $_[0]
- }
- );
- $intf->{ONBOOT} = bool2yesno($onboot);
-}
-
-sub configureNetworkNet {
- my ($in, $netc, $intf, @devices) = @_;
-
- $netc->{dnsServer} ||= dns($intf->{IPADDR});
- my $gateway_ex = gateway($intf->{IPADDR});
-#- $netc->{GATEWAY} ||= gateway($intf->{IPADDR});
-
- $::isInstall and $in->set_help('configureNetworkHost');
- $in->ask_from(_("Configuring network"),
-_("Please enter your host name.
-Your host name should be a fully-qualified host name,
-such as ``mybox.mylab.myco.com''.
-You may also enter the IP address of the gateway if you have one"),
- [ { label => _("Host name"), val => \$netc->{HOSTNAME} },
- { label => _("DNS server"), val => \$netc->{dnsServer} },
- { label => _("Gateway (e.g. %s)", $gateway_ex), val => \$netc->{GATEWAY} },
- if_(@devices > 1,
- { label => _("Gateway device"), val => \$netc->{GATEWAYDEV}, list => \@devices },
- ),
- ],
- );
-}
-
-sub miscellaneousNetwork {
- my ($in, $clicked, $no_track_net) = @_;
- my $u = $::o->{miscellaneous} ||= {};
- $::isInstall and $in->set_help('configureNetworkProxy');
- $u->{track_network_id} = detect_devices::isLaptop();
- $::expert || $clicked and $in->ask_from('',
- _("Proxies configuration"),
- [ { label => _("HTTP proxy"), val => \$u->{http_proxy} },
- { label => _("FTP proxy"), val => \$u->{ftp_proxy} },
- if_(!$no_track_net, { label => _("Track network card id (useful for laptops)"), val => \$u->{track_network_id}, type => "bool" }),
- ],
- complete => sub {
- $u->{http_proxy} =~ m,^($|http://), or $in->ask_warn('', _("Proxy should be http://...")), return 1,0;
- $u->{ftp_proxy} =~ m,^($|ftp://), or $in->ask_warn('', _("Proxy should be ftp://...")), return 1,1;
- 0;
- }
- ) || return;
-}
-
-sub read_all_conf {
- my ($prefix, $netc, $intf) = @_;
- $netc ||= {}; $intf ||= {};
- add2hash($netc, read_conf("$prefix/etc/sysconfig/network")) if -r "$prefix/etc/sysconfig/network";
- add2hash($netc, read_resolv_conf("$prefix/etc/resolv.conf")) if -r "$prefix/etc/resolv.conf";
- foreach (all("$prefix/etc/sysconfig/network-scripts")) {
- if (/ifcfg-(\w+)/ && $1 ne 'lo' && $1 !~ /ppp/) {
- my $intf = findIntf($intf, $1);
- add2hash($intf, { getVarsFromSh("$prefix/etc/sysconfig/network-scripts/$_") });
- }
- }
-}
-
-#- configureNetwork2 : configure the network interfaces.
-#- input
-#- $prefix
-#- $netc
-#- $intf
-#- $netc input
-#- NETWORKING : networking flag : string : "yes" by default
-#- FORWARD_IPV4 : forward IP flag : string : "false" by default
-#- HOSTNAME : hostname : string : "localhost.localdomain" by default
-#- DOMAINNAME : domainname : string : $netc->{HOSTNAME} =~ /\.(.*)/ by default
-#- DOMAINNAME2 : well it's another domainname : have to look further why we used 2
-#- The following are facultatives
-#- DHCP_HOSTNAME : If you have a dhcp and want to set the hostname
-#- GATEWAY : gateway
-#- GATEWAYDEV : gateway interface
-#- NISDOMAIN : nis domain
-#- $netc->{dnsServer} : dns server 1
-#- $netc->{dnsServer2} : dns server 2
-#- $netc->{dnsServer3} : dns server 3 : note that we uses the dns1 for the LAN, and the 2 others for the internet conx
-#- $intf input: for each $device (for example ethx)
-#- $intf->{$device}{IPADDR} : IP address
-#- $intf->{$device}{NETMASK} : netmask
-#- $intf->{$device}{DEVICE} : DEVICE = $device
-#- $intf->{$device}{BOOTPROTO} : boot prototype : "bootp" or "dhcp" or "pump" or ...
-sub configureNetwork2 {
- my ($in, $prefix, $netc, $intf) = @_;
- my $etc = "$prefix/etc";
-
- $netc->{wireless_eth} and $in->do_pkgs->install(qw(wireless-tools));
- write_conf("$etc/sysconfig/network", $netc);
- write_resolv_conf("$etc/resolv.conf", $netc);
- write_interface_conf("$etc/sysconfig/network-scripts/ifcfg-$_->{DEVICE}", $_, $prefix) foreach grep { $_->{DEVICE} } values %$intf;
- add2hosts("$etc/hosts", $netc->{HOSTNAME}, map { $_->{IPADDR} } values %$intf);
-
- if (grep { $_->{BOOTPROTO} =~ /^(dhcp)$/ } values %$intf) {
- $in->do_pkgs->install($netc->{dhcp_client} ? $netc->{dhcp_client} : 'dhcpcd');
- }
- if (grep { $_->{BOOTPROTO} =~ /^(pump|bootp)$/ } values %$intf) {
- $in->do_pkgs->install('pump');
- }
- #-res_init(); #- reinit the resolver so DNS changes take affect
-
- any::miscellaneousNetwork($prefix);
-}
-
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/network/nfs.pm b/perl-install/network/nfs.pm
deleted file mode 100644
index 58b2dab28..000000000
--- a/perl-install/network/nfs.pm
+++ /dev/null
@@ -1,66 +0,0 @@
-package network::nfs; # $Id$
-
-use strict;
-use diagnostics;
-
-use common;
-use network::network;
-use network::smbnfs;
-use log;
-
-our @ISA = 'network::smbnfs';
-
-sub to_fstab_entry {
- my ($class, $e) = @_;
- $class->to_fstab_entry_raw($e, 'nfs');
-}
-sub comment_to_string {
- my ($class, $comment) = @_;
- member($comment, qw(* 0.0.0.0/0.0.0.0 (everyone))) ? '' : $comment;
-}
-sub from_dev {
- my ($class, $dev) = @_;
- $dev =~ m|(.*?):(.*)|;
-}
-sub to_dev_raw {
- my ($class, $server, $name) = @_;
- $server . ':' . $name;
-}
-
-sub check {
- my ($class, $in) = @_;
- $class->raw_check($in, 'nfs-utils-clients', '/usr/sbin/showmount');
-}
-
-sub find_servers {
- local *F;
- my $pid = open F, "rpcinfo-flushed -b mountd 2 |";
- $SIG{ALRM} = sub { kill(15, $pid) };
- alarm 1;
-
- my $domain = chomp_(`domainname`);
- my @servers;
- while (<F>) {
- chomp;
- my ($ip, $name) = /(\S+)\s+(\S+)/ or log::l("bad line in rpcinfo output"), next;
- $name =~ s/\Q.$domain//;
- $name =~ s/\.$//;
- push @servers, { ip => $ip, if_($name ne '(unknown)', name => $name) };
- }
- @servers;
-}
-
-sub find_exports {
- my ($class, $server) = @_;
-
- local *F;
- my $s = $server->{ip} || $server->{name};
- my $pid = open F, "showmount -e $s |";
- $SIG{ALRM} = sub { kill(15, $pid) };
- alarm 5;
-
- my (undef, @l) = <F>;
- map { /(\S+)\s*(\S+)/; { name => $1, comment => $2, server => $server } } @l;
-}
-
-1;
diff --git a/perl-install/network/smb.pm b/perl-install/network/smb.pm
deleted file mode 100644
index d212f5122..000000000
--- a/perl-install/network/smb.pm
+++ /dev/null
@@ -1,150 +0,0 @@
-package network::smb; # $Id$
-
-use strict;
-use diagnostics;
-
-use common;
-use fs;
-use network::network;
-use network::smbnfs;
-
-
-our @ISA = 'network::smbnfs';
-
-sub to_fstab_entry {
- my ($class, $e) = @_;
- my $part = $class->to_fstab_entry_raw($e, 'smbfs');
- if ($e->{server}{username}) {
- my ($options, $unknown) = fs::mount_options_unpack($part);
- $options->{"$_="} = $e->{server}{$_} foreach qw(username password domain);
- fs::mount_options_pack($part, $options, $unknown);
- }
- $part;
-}
-sub from_dev {
- my ($class, $dev) = @_;
- $dev =~ m|//(.*?)/(.*)|;
-}
-sub to_dev_raw {
- my ($class, $server, $name) = @_;
- '//' . $server . '/' . $name;
-}
-
-sub check {
- my ($class, $in) = @_;
- $class->raw_check($in, 'samba-client', '/usr/bin/nmblookup');
-}
-
-sub smbclient {
- my ($server) = @_;
- my $name = $server->{name} || $server->{ip};
- my $ip = $server->{ip} ? "-I $server->{ip}" : '';
- my $group = $server->{group} ? " -W $server->{group}" : '';
-
- my $U = $server->{username} ? "$server->{domain}/$server->{username}%$server->{password}" : '%';
- `smbclient -U $U -L $name $ip$group`;
-}
-
-sub find_servers {
- my (undef, @l) = `nmblookup "*"`;
- s/\s.*\n// foreach @l;
- my @servers = grep { network::network::is_ip($_) } @l;
- my %servers;
- $servers{$_}{ip} = $_ foreach @servers;
- my ($ip, $browse);
- foreach (`nmblookup -A @servers`) {
- my $nb = /^Looking up status of (\S+)/ .. /^$/ or next;
- if ($nb == 1) {
- $ip = $1;
- } elsif (/<00>/) {
- $servers{$ip}{/<GROUP>/ ? 'group' : 'name'} ||= lc first(/(\S+)/);
- } elsif (/__MSBROWSE__/) {
- $browse ||= $servers{$ip};
- }
- }
- if ($browse) {
- my %l;
- foreach (smbclient($browse)) {
- my $nb = /^\s*Workgroup/ .. /^$/;
- $nb > 2 or next;
- my ($group, $name) = split(' ', lc($_));
-
- # already done
- next if grep { $group eq $_->{group} } values %servers;
-
- $l{$name} = $group;
- }
- if (my @l = keys %l) {
- foreach (`nmblookup @l`) {
- $servers{$1} = { name => $2, group => $l{$2} } if /(\S+)\s+([^<]+)<00>/;
- }
- }
- }
- values %servers;
-}
-
-sub find_exports {
- my ($class, $server) = @_;
- my @l;
-
- foreach (smbclient($server)) {
- chomp;
- s/^\t//;
- /NT_STATUS_/ and die $_;
- my ($name, $type, $comment) = unpack "A15 A10 A*", $_;
- if ($name eq '---------' && $type eq '----' && $comment eq '-------' .. /^$/) {
- push @l, { name => $name, type => $type, comment => $comment, server => $server }
- if $type eq 'Disk' && $name !~ /\$$/ && $name !~ /NETLOGON|SYSVOL/;
- }
- }
- @l;
-}
-
-sub authentifications_available {
- my ($server) = @_;
- map { if_(/^auth.\Q$server->{name}.\E(.*)/, $1) } all("/etc/samba");
-}
-
-sub to_credentials {
- my ($server_name, $username) = @_;
- $username or die 'to_credentials';
- "/etc/samba/auth.$server_name.$username";
-}
-
-sub fstab_entry_to_credentials {
- my ($part) = @_;
-
- my ($server_name) = network::smb->from_dev($part->{device}) or return;
-
- my ($options, $unknown) = fs::mount_options_unpack($part);
- $options->{'username='} && $options->{'password='} or return;
- my %h = map { $_ => delete $options->{"$_="} } qw(username domain password);
- $h{file} = $options->{'credentials='} = to_credentials($server_name, $h{username});
- fs::mount_options_pack_($part, $options, $unknown), \%h;
-}
-
-sub remove_bad_credentials {
- my ($server) = @_;
- unlink to_credentials($server->{name}, $server->{username});
-}
-
-sub save_credentials {
- my ($credentials) = @_;
- my $file = $credentials->{file};
- output($file, map { "$_ = $credentials->{$_}\n" } qw(username domain password));
- chmod(0640, $file);
-}
-
-
-sub read_credentials_raw {
- my ($file) = @_;
- my %h = map { /(.*?)\s*=\s*(.*)/ } cat_($file);
- \%h;
-}
-
-sub read_credentials {
- my ($server, $username) = @_;
- put_in_hash($server, read_credentials_raw(to_credentials($server->{name}, $username)));
-}
-
-1;
diff --git a/perl-install/network/smbnfs.pm b/perl-install/network/smbnfs.pm
deleted file mode 100644
index 6b55f6fd0..000000000
--- a/perl-install/network/smbnfs.pm
+++ /dev/null
@@ -1,58 +0,0 @@
-package network::smbnfs; # $Id$
-
-use strict;
-use diagnostics;
-
-use fs;
-
-
-sub new {
- my ($class, $v) = @_;
- bless($v || {}, $class);
-}
-
-sub server_to_string {
- my ($class, $server) = @_;
- $server->{name} || $server->{ip};
-}
-sub comment_to_string {
- my ($class, $comment) = @_;
- $comment;
-}
-sub to_dev {
- my ($class, $e) = @_;
- $class->to_dev_raw($class->server_to_string($e->{server}), $e->{name} || $e->{ip});
-}
-sub to_string {
- my ($class, $e) = @_;
- my $comment = $class->comment_to_string($e->{comment});
- ($e->{name} || $e->{ip}) . ($comment ? " ($comment)" : '');
-}
-
-sub to_fullstring {
- my ($class, $e) = @_;
- my $comment = $class->comment_to_string($e->{comment});
- $class->to_dev($e) . ($comment ? " ($comment)" : '');
-}
-sub to_fstab_entry_raw {
- my ($class, $e, $type) = @_;
- my $fs_entry = { device => $class->to_dev($e), type => $type };
- fs::set_default_options($fs_entry);
- $fs_entry;
-}
-
-sub raw_check {
- my ($class, $in, $pkg, $file) = @_;
- if (! -e $file) {
- $in->ask_okcancel('', _("The package %s needs to be installed. Do you want to install it?", $pkg), 1) or return;
- $in->do_pkgs->install($pkg);
- }
- if (! -e $file) {
- $in->ask_warn('', _("Mandatory package %s is missing", $pkg));
- return;
- }
- 1;
-}
-
-1;
-
diff --git a/perl-install/network/tools.pm b/perl-install/network/tools.pm
deleted file mode 100644
index ccc492395..000000000
--- a/perl-install/network/tools.pm
+++ /dev/null
@@ -1,227 +0,0 @@
-package network::tools;
-
-use common;
-use run_program;
-use c;
-use vars qw(@ISA @EXPORT);
-use MDK::Common::Globals "network", qw($in $prefix $disconnect_file $connect_prog $connect_file);
-use MDK::Common::System qw(getVarsFromSh);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(write_cnx_script write_secret_backend write_initscript ask_connect_now connect_backend disconnect_backend read_providers_backend ask_info2 type2interface connected connected_bg connected2 disconnected);
-@EXPORT_OK = qw($in);
-
-sub write_cnx_script {
- my ($netc, $type, $up, $down, $type2) = @_;
- if ($type) {
- $netc->{internet_cnx}{$type}{$_->[0]}=$_->[1] foreach ([$connect_file, $up], [$disconnect_file, $down]);
- $netc->{internet_cnx}{$type}{type} = $type2;
- } else {
- foreach ($connect_file, $disconnect_file) {
- output ("$prefix$_",
-'#!/bin/bash
-' . if_(!$netc->{at_boot}, 'if [ "x$1" == "x--boot_time" ]; then exit; fi
-') . $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{$_});
- chmod 0755, "$prefix" . $_;
- }
- }
-}
-
-sub write_secret_backend {
- my ($a, $b) = @_;
- foreach my $i ("pap-secrets", "chap-secrets") {
- substInFile { s/^'$a'.*\n//; $_ .= "\n'$a' * '$b' * \n" if eof } "$prefix/etc/ppp/$i";
- }
-}
-
-sub ask_connect_now {
- my ($type) = @_;
- $::Wizard_no_previous=1;
- #- FIXME : code the exception to be generated by ask_yesorno, to be able to remove the $::Wizard_no_previous=1;
- if ($in->ask_yesorno(_("Internet configuration"),
- _("Do you want to try to connect to the Internet now?")
- )) {
- my $up;
- {
- my $w = $in->wait_message('', _("Testing your connection..."), 1);
- connect_backend();
- my $s = 30;
- $type =~ /modem/ and $s=50;
- $type =~ /adsl/ and $s=35;
- $type =~ /isdn/ and $s=20;
- sleep $s;
- my $netc = {};
- $up=connected();
- }
- my $m = $up ? (_("The system is now connected to Internet.") .
- if_($::isInstall, _("For security reason, it will be disconnected now.")) ) :
- _("The system doesn't seem to be connected to internet.
-Try to reconfigure your connection.");
- if ($::isWizard) {
- $::Wizard_no_previous=1;
- $::Wizard_finished=1;
- $in->ask_okcancel(_("Network Configuration"), $m, 1);
- undef $::Wizard_no_previous;
- undef $::Wizard_finished;
- } else { $in->ask_warn('', $m ); }
- $::isInstall and disconnect_backend();
- }
- undef $::Wizard_no_previous;
- $up;
-}
-
-sub connect_backend { run_program::rooted($prefix, "$connect_prog &") }
-
-sub disconnect_backend { run_program::rooted($prefix, "$disconnect_file &") }
-
-sub read_providers_backend { my ($file) = @_; map { /(.*?)=>/ } catMaybeCompressed($file) }
-
-sub ask_info2 {
- my ($cnx, $netc) = @_;
- $::isInstall and $in->set_help('configureNetworkDNS');
- $in->ask_from(_("Connection Configuration"),
- _("Please fill or check the field below"),
- [
- if__($cnx->{irq}, { label => _("Card IRQ"), val => \$cnx->{irq} }) ,
- if__($cnx->{mem}, { label => _("Card mem (DMA)"), val => \$cnx->{mem} }),
- if__($cnx->{io}, { label => _("Card IO"), val => \$cnx->{io} }),
- if__($cnx->{io0}, { label => _("Card IO_0"), val => \$cnx->{io0} }),
- if__($cnx->{io1}, { label => _("Card IO_1"), val => \$cnx->{io1} }),
- if__($cnx->{phone_in}, { label => _("Your personal phone number"), val => \$cnx->{phone_in} }),
- if__($netc->{DOMAINNAME2}, { label => _("Provider name (ex provider.net)"), val => \$netc->{DOMAINNAME2} }),
- if__($cnx->{phone_out}, { label => _("Provider phone number"), val => \$cnx->{phone_out} }),
- if__($netc->{dnsServer2}, { label => _("Provider dns 1 (optional)"), val => \$netc->{dnsServer2} }),
- if__($netc->{dnsServer3}, { label => _("Provider dns 2 (optional)"), val => \$netc->{dnsServer3} }),
- if__($cnx->{vpivci}, { label => _("Choose your country"), val => \$netc->{vpivci}, list => detect_timezone() }),
- if__($cnx->{dialing_mode}, { label => _("Dialing mode"), val => \$cnx->{dialing_mode},list=>["auto","manual"]}),
- if__($cnx->{speed}, { label => _("Connection speed"), val => \$cnx->{speed}, list => ["64 Kb/s", "128 Kb/s"]}),
- if__($cnx->{huptimeout}, { label => _("Connection timeout (in sec)"), val => \$cnx->{huptimeout} }),
- if__($cnx->{login}, { label => _("Account Login (user name)"), val => \$cnx->{login} }),
- if__($cnx->{passwd}, { label => _("Account Password"), val => \$cnx->{passwd} }),
- ]
- ) or return;
- if ($netc->{vpivci}) {
- foreach (['Netherlands', '8_48'], ['France', '8_35'], ['Belgium', '8_35'], ['Italy', '8_35'], ['UK', '0_38'], ['USA', '8_35']) {
- $netc->{vpivci} eq $_->[0] and $netc->{vpivci} = $_->[1];
- }
- }
- 1;
-}
-
-sub detect_timezone {
- my %tmz2country = (
- 'Europe/Paris' => _("France"),
- 'Europe/Amsterdam' => _("Netherlands"),
- 'Europe/Rome' => _("Italy"),
- 'Europe/Brussels' => _("Belgium"),
- 'America/New_York' => _("United States"),
- 'Europe/London' => _("United Kingdom")
- );
- my %tm_parse = MDK::Common::System::getVarsFromSh('/etc/sysconfig/clock');
- foreach (keys %tmz2country) {
- if ($_ eq $tm_parse{ZONE}) {
- unshift @country, $tmz2country{$_};
- } else { push @country, $tmz2country{$_} };
- }
- \@country;
-}
-
-sub type2interface {
- my ($i) = @_;
- $i=~/$_->[0]/ and return $_->[1] foreach (
- [ modem => 'ppp'],
- [ isdn_internal => 'ippp'],
- [ isdn_external => 'ppp'],
- [ adsl => 'ppp'],
- [ cable => 'eth'],
- [ lan => 'eth']);
-}
-
-sub connected { gethostbyname("mandrakesoft.com") ? 1 : 0 }
-
-my $kid_pipe;
-sub connected_bg {
- local $|=1;
- my ($ref) = @_;
- if (defined $kid_pipe) {
- local *F;
- *F = *$kid_pipe;
- fcntl(F, c::F_SETFL(), c::O_NONBLOCK()) or die "can't fcntl F_SETFL: $!";
- my $a;
- if (defined($a = <F>)) {
- close($kid_pipe) || warn "kid exited $?";
- undef $kid_pipe;
- $$ref = $a;
- }
- } else { $kid_pipe = connected2(); }
- 1;
-}
-
-sub connected2 {
- my $pid = open(KID_TO_READ, "-|");
- if ($pid) { # parent
- return \*KID_TO_READ;
- } else { # child
- my $a = gethostbyname("mandrakesoft.com") ? 1 : 0;
- print $a;
- c::_exit(0);
- }
-}
-
-sub disconnected { }
-
-
-sub write_initscript {
- output ("$prefix/etc/rc.d/init.d/internet",
- q{
-#!/bin/bash
-#
-# internet Bring up/down internet connection
-#
-# chkconfig: 2345 11 89
-# description: Activates/Deactivates the internet interfaces
-#
-# dam's (damien@mandrakesoft.com)
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
- case "$1" in
- start)
- if [ -e } . $connect_file . q{ ]; then
- action "Checking internet connections to start at boot" "} . "$connect_file --boot_time" . q{"
- else
- action "No connection to start" "true"
- fi
- touch /var/lock/subsys/internet
- ;;
- stop)
- if [ -e } . $disconnect_file . q{ ]; then
- action "Stopping internet connection if needed: " "} . "$disconnect_file --boot_time" . q{"
- else
- action "No connection to stop" "true"
- fi
- rm -f /var/lock/subsys/internet
- ;;
- restart)
- $0 stop
- echo "Waiting 10 sec before restarting the internet connection."
- sleep 10
- $0 start
- ;;
- status)
- ;;
- *)
- echo "Usage: internet {start|stop|status|restart}"
- exit 1
-esac
-exit 0
- });
- chmod 0755, "$prefix/etc/rc.d/init.d/internet";
- $::isStandalone ? system("/sbin/chkconfig --add internet") : do {
- symlinkf ("../init.d/internet", "$prefix/etc/rc.d/rc$_") foreach
- '0.d/K11internet', '1.d/K11internet', '2.d/K11internet', '3.d/S89internet', '5.d/S89internet', '6.d/K11internet';
- };
-}
-
-1;
diff --git a/perl-install/pam.net_monitor b/perl-install/pam.net_monitor
deleted file mode 100644
index bc9a8d611..000000000
--- a/perl-install/pam.net_monitor
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-auth sufficient /lib/security/pam_rootok.so
-auth required /lib/security/pam_stack.so service=system-auth
-account required /lib/security/pam_permit.so
-session optional /lib/security/pam_xauth.so
-
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
deleted file mode 100644
index 2feb0faf3..000000000
--- a/perl-install/partition_table.pm
+++ /dev/null
@@ -1,794 +0,0 @@
-package partition_table; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK @important_types @important_types2 @fields2save @bad_types);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (
- types => [ qw(type2name type2fs name2type fs2type isExtended isExt2 isThisFs isTrueFS isSwap isDos isWin isFat isSunOS isOtherAvailableFS isPrimary isRawLVM isRawRAID isRAID isLVM isNT isMountableRW isNonMountable isPartOfLVM isPartOfRAID isPartOfLoopback isApplePartMap isLoopback isMounted isBusy isSpecial maybeFormatted isApple isAppleBootstrap) ],
-);
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-
-use common;
-use partition_table_raw;
-use detect_devices;
-use log;
-
-@important_types = ('Linux native', 'Linux swap',
- if_(arch() =~ /i.86/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'DOS FAT16', 'FAT32'),
- if_(arch() =~ /ia64/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: XFS', 'FAT32'),
- if_(arch() =~ /ppc/, 'Journalised FS: ext3', 'Journalised FS: ReiserFS', 'Journalised FS: JFS', 'Journalised FS: XFS', 'Apple HFS Partition', 'Apple Bootstrap'));
-@important_types2 = ('Linux RAID', 'Linux Logical Volume Manager partition');
-
-@fields2save = qw(primary extended totalsectors isDirty needKernelReread);
-
-@bad_types = ('Empty', 'DOS 3.3+ Extended Partition', 'Win95: Extended partition, LBA-mapped', 'Linux extended partition');
-
-my %types = (
- 0x0 => 'Empty',
-if_(arch() =~ /^ppc/,
- 0x183 => 'Journalised FS: ReiserFS',
- 0x283 => 'Journalised FS: XFS',
- 0x383 => 'Journalised FS: JFS',
- 0x483 => 'Journalised FS: ext3',
- 0x401 => 'Apple Partition',
- 0x401 => 'Apple Bootstrap',
- 0x402 => 'Apple HFS Partition',
-), if_(arch() =~ /^i.86/,
- 0x183 => 'Journalised FS: ReiserFS',
- 0x283 => 'Journalised FS: XFS',
- 0x383 => 'Journalised FS: JFS',
- 0x483 => 'Journalised FS: ext3',
-), if_(arch() =~ /^ia64/,
- 0x100 => 'Various',
- 0x183 => 'Journalised FS: ReiserFS',
- 0x283 => 'Journalised FS: XFS',
- 0x483 => 'Journalised FS: ext3',
-), if_(arch() =~ /^sparc/,
- 0x1 => 'SunOS boot',
- 0x2 => 'SunOS root',
- 0x3 => 'SunOS swap',
- 0x4 => 'SunOS usr',
- 0x5 => 'Whole disk',
- 0x6 => 'SunOS stand',
- 0x7 => 'SunOS var',
- 0x8 => 'SunOS home',
-), if_(arch() =~ /^i.86/,
- 0x1 => 'DOS 12-bit FAT',
- 0x2 => 'XENIX root',
- 0x3 => 'XENIX /usr',
- 0x4 => 'DOS 16-bit FAT (up to 32M)',
- 0x5 => 'DOS 3.3+ Extended Partition',
- 0x6 => 'DOS FAT16',
- 0x7 => 'NTFS (or HPFS)',
- 0x8 => 'OS/2 (v1.0-1.3 only) / AIX boot partition / SplitDrive / Commodore DOS / DELL partition spanning multiple drives / QNX 1.x and 2.x ("qny")',
-),
- 0x9 => 'AIX data partition / Coherent filesystem / QNX 1.x and 2.x ("qnz")',
- 0xa => 'OS/2 Boot Manager / Coherent swap partition / OPUS',
- 0xb => 'FAT32',
- 0xc => 'Win98 FAT32, LBA-mapped',
- 0xe => 'Win95: DOS 16-bit FAT, LBA-mapped',
- 0xf => 'Win95: Extended partition, LBA-mapped',
- 0x10 => 'OPUS (?)',
- 0x11 => 'Hidden DOS 12-bit FAT',
- 0x12 => 'Compaq/HP config partition',
- 0x14 => 'Hidden DOS 16-bit FAT <32M',
- 0x16 => 'Hidden DOS 16-bit FAT >=32M',
- 0x17 => 'Hidden IFS (e.g., HPFS)',
- 0x18 => 'AST Windows swapfile',
- 0x1b => 'Hidden WIN95 OSR2 32-bit FAT',
- 0x1c => 'Hidden WIN95 OSR2 32-bit FAT, LBA-mapped',
- 0x1e => 'Hidden FAT95',
- 0x22 => 'Used for Oxygen Extended Partition Table by ekstazya@sprint.ca.',
- 0x24 => 'NEC DOS 3.x',
- 0x38 => 'THEOS ver 3.2 2gb partition',
- 0x39 => 'THEOS ver 4 spanned partition',
- 0x3a => 'THEOS ver 4 4gb partition',
- 0x3b => 'THEOS ver 4 extended partition',
- 0x3c => 'PartitionMagic recovery partition',
- 0x40 => 'Venix 80286',
- 0x41 => 'Linux/MINIX (sharing disk with DRDOS) / Personal RISC Boot / PPC PReP (Power PC Reference Platform) Boot',
- 0x42 => 'Windows Dynamic Partition',
- 0x43 => 'Linux native (sharing disk with DRDOS)',
- 0x45 => 'EUMEL/Elan',
- 0x46 => 'EUMEL/Elan 0x46',
- 0x47 => 'EUMEL/Elan 0x47',
- 0x48 => 'EUMEL/Elan 0x48',
- 0x4d => 'QNX4.x',
- 0x4e => 'QNX4.x 2nd part',
- 0x4f => 'QNX4.x 3rd part / Oberon partition',
- 0x50 => 'OnTrack Disk Manager (older versions) RO',
- 0x51 => 'OnTrack Disk Manager RW (DM6 Aux1) / Novell',
- 0x52 => 'CP/M / Microport SysV/AT',
- 0x53 => 'Disk Manager 6.0 Aux3',
- 0x54 => 'Disk Manager 6.0 Dynamic Drive Overlay',
- 0x55 => 'EZ-Drive',
- 0x56 => 'Golden Bow VFeature Partitioned Volume. / DM converted to EZ-BIOS',
- 0x57 => 'DrivePro',
- 0x5c => 'Priam EDisk',
- 0x61 => 'SpeedStor',
- 0x63 => 'Unix System V (SCO, ISC Unix, UnixWare, ...), Mach, GNU Hurd',
- 0x64 => 'PC-ARMOUR protected partition / Novell Netware 2.xx',
- 0x65 => 'Novell Netware 3.xx or 4.xx',
- 0x67 => 'Novell',
- 0x68 => 'Novell 0x68',
- 0x69 => 'Novell 0x69',
- 0x70 => 'DiskSecure Multi-Boot',
- 0x75 => 'IBM PC/IX',
- 0x80 => 'MINIX until 1.4a',
- 0x81 => 'MINIX since 1.4b, early Linux / Mitac disk manager',
- 0x82 => 'Linux swap',
- 0x83 => 'Linux native',
- 0x84 => 'OS/2 hidden C: drive / Hibernation partition',
- 0x85 => 'Linux extended partition',
- 0x86 => 'Old Linux RAID partition superblock / NTFS volume set',
- 0x87 => 'NTFS volume set',
- 0x8a => 'Linux Kernel Partition (used by AiR-BOOT)',
- 0x8e => 'Linux Logical Volume Manager partition',
- 0x93 => 'Amoeba',
- 0x94 => 'Amoeba bad block table',
- 0x99 => 'DCE376 logical drive',
- 0xa0 => 'IBM Thinkpad hibernation partition / Phoenix NoteBIOS Power Management "Save-to-Disk" partition',
- 0xa5 => 'BSD/386, 386BSD, NetBSD, FreeBSD',
- 0xa6 => 'OpenBSD',
- 0xa7 => 'NEXTSTEP',
- 0xa9 => 'NetBSD',
- 0xaa => 'Olivetti Fat 12 1.44Mb Service Partition',
- 0xb7 => 'BSDI filesystem',
- 0xb8 => 'BSDI swap partition',
- 0xbe => 'Solaris boot partition',
- 0xc0 => 'CTOS / REAL/32 secure small partition',
- 0xc1 => 'DRDOS/secured (FAT-12)',
- 0xc4 => 'DRDOS/secured (FAT-16, < 32M)',
- 0xc6 => 'DRDOS/secured (FAT-16, >= 32M) / Windows NT corrupted FAT16 volume/stripe set',
- 0xc7 => 'Windows NT corrupted NTFS volume/stripe set / Syrinx boot',
- 0xcb => 'reserved for DRDOS/secured (FAT32)',
- 0xcc => 'reserved for DRDOS/secured (FAT32, LBA)',
- 0xcd => 'CTOS Memdump?',
- 0xce => 'reserved for DRDOS/secured (FAT16, LBA)',
- 0xd0 => 'REAL/32 secure big partition',
- 0xd1 => 'Old Multiuser DOS secured FAT12',
- 0xd4 => 'Old Multiuser DOS secured FAT16 <32M',
- 0xd5 => 'Old Multiuser DOS secured extended partition',
- 0xd6 => 'Old Multiuser DOS secured FAT16 >=32M',
- 0xd8 => 'CP/M-86',
- 0xdb => 'Digital Research CP/M, Concurrent CP/M, Concurrent DOS / CTOS (Convergent Technologies OS -Unisys) / KDG Telemetry SCPU boot',
- 0xdd => 'Hidden CTOS Memdump?',
- 0xe1 => 'DOS access or SpeedStor 12-bit FAT extended partition',
- 0xe3 => 'DOS R/O or SpeedStor',
- 0xe4 => 'SpeedStor 16-bit FAT extended partition < 1024 cyl.',
- 0xeb => 'BeOS',
- 0xee => 'EFI GPT',
- 0xef => 'EFI (FAT-12/16/32)',
- 0xf1 => 'SpeedStor 0xf1',
- 0xf2 => 'DOS 3.3+ secondary partition',
- 0xf4 => 'SpeedStor large partition / Prologue single-volume partition',
- 0xf5 => 'Prologue multi-volume partition',
- 0xfd => 'Linux RAID',
- 0xfe => 'SpeedStor > 1024 cyl. or LANstep / IBM PS/2 IML (Initial Microcode Load) partition, located at the end of the disk. / Windows NT Disk Administrator hidden partition / Linux Logical Volume Manager partition (old)',
- 0xff => 'Xenix Bad Block Table',
-);
-
-my %type2fs = (
-arch() =~ /^ppc/ ? (
- 0x07 => 'hpfs',
-) : (
- 0x07 => 'ntfs',
-),
-arch() !~ /sparc/ ? (
- 0x01 => 'vfat',
- 0x04 => 'vfat',
- 0x05 => 'ignore',
- 0x06 => 'vfat',
-) : (
- 0x01 => 'ufs',
- 0x02 => 'ufs',
- 0x04 => 'ufs',
- 0x06 => 'ufs',
- 0x07 => 'ufs',
- 0x08 => 'ufs',
-),
- 0x0b => 'vfat',
- 0x0c => 'vfat',
- 0x0e => 'vfat',
- 0x1b => 'vfat',
- 0x1c => 'vfat',
- 0x1e => 'vfat',
- 0x82 => 'swap',
- 0x83 => 'ext2',
- 0x183=> 'reiserfs',
- 0x283=> 'xfs',
- 0x383=> 'jfs',
- 0x483=> 'ext3',
- 0x401 => 'apple',
- 0x402 => 'hfs',
-);
-
-my %types_rev = reverse %types;
-my %fs2type = reverse %type2fs;
-
-
-1;
-
-sub important_types {
- my @l = (@important_types, if_($::expert, @important_types2, sort values %types));
- difference2(\@l, \@bad_types);
-}
-
-sub type2fs { $type2fs{$_[0]{type}} || $_[0]{type} }
-sub fs2type { $fs2type{$_[0]} || $_[0] }
-sub type2name { $types{$_[0]} || $_[0] }
-sub name2type {
- local ($_) = @_;
- /0x(.*)/ ? hex $1 : $types_rev{$_} || $_;
-}
-
-sub isWholedisk { arch() =~ /^sparc/ && $_[0]{type} == 5 }
-sub isExtended { arch() !~ /^sparc/ && ($_[0]{type} == 5 || $_[0]{type} == 0xf || $_[0]{type} == 0x85) }
-sub isRawLVM { $_[0]{type} == 0x8e }
-sub isRawRAID { $_[0]{type} == 0xfd }
-sub isSwap { type2fs($_[0]) eq 'swap' }
-sub isExt2 { type2fs($_[0]) eq 'ext2' }
-sub isDos { arch() !~ /^sparc/ && $ {{ 1=>1, 4=>1, 6=>1 }}{$_[0]{type}} }
-sub isWin { $ {{ 0xb=>1, 0xc=>1, 0xe=>1, 0x1b=>1, 0x1c=>1, 0x1e=>1 }}{$_[0]{type}} }
-sub isFat { isDos($_[0]) || isWin($_[0]) }
-sub isSunOS { arch() =~ /sparc/ && $ {{ 0x1=>1, 0x2=>1, 0x4=>1, 0x6=>1, 0x7=>1, 0x8=>1 }}{$_[0]{type}} }
-sub isNT { arch() !~ /^sparc/ && $_[0]{type} == 0x7 }
-sub isApple { type2fs($_[0]) eq 'apple' && defined $_[0]{isDriver} }
-sub isAppleBootstrap { type2fs($_[0]) eq 'apple' && defined $_[0]{isBoot} }
-sub isHiddenMacPart { defined $_[0]{isMap} }
-
-sub isThisFs { type2fs($_[1]) eq $_[0] }
-sub isTrueFS { member(type2fs($_[0]), qw(ext2 reiserfs xfs jfs ext3)) }
-
-sub isOtherAvailableFS { isFat($_[0]) || isSunOS($_[0]) || isThisFs('hfs', $_[0]) } #- other OS that linux can access its filesystem
-sub isMountableRW { isTrueFS($_[0]) || isOtherAvailableFS($_[0]) }
-sub isNonMountable { isRawRAID($_[0]) || isRawLVM($_[0]) }
-
-sub isPartOfLVM { defined $_[0]{lvm} }
-sub isPartOfRAID { defined $_[0]{raid} }
-sub isPartOfLoopback { defined $_[0]{loopback} }
-sub isRAID { $_[0]{device} =~ /^md/ }
-sub isLVM { $_[0]{LVMname} }
-sub isLoopback { defined $_[0]{loopback_file} }
-sub isMounted { $_[0]{isMounted} }
-sub isBusy { isMounted($_[0]) || isPartOfRAID($_[0]) || isPartOfLVM($_[0]) || isPartOfLoopback($_[0]) }
-sub isSpecial { isRAID($_[0]) || isLVM($_[0]) || isLoopback($_[0]) }
-sub maybeFormatted { $_[0]{isFormatted} || !$_[0]{notFormatted} }
-
-
-#- works for both hard drives and partitions ;p
-sub description {
- my ($hd) = @_;
- my $win = $hd->{device_windobe};
-
- sprintf "%s%s (%s%s%s%s)",
- $hd->{device},
- $win && " [$win:]",
- formatXiB($hd->{totalsectors} || $hd->{size}, 512),
- $hd->{info} && ", $hd->{info}",
- $hd->{mntpoint} && ", " . $hd->{mntpoint},
- $hd->{type} && ", " . type2name($hd->{type});
-}
-
-sub isPrimary {
- my ($part, $hd) = @_;
- foreach (@{$hd->{primary}{raw}}) { $part eq $_ and return 1; }
- 0;
-}
-
-sub adjustStartAndEnd {
- my ($hd, $part) = @_;
-
- $hd->adjustStart($part);
- $hd->adjustEnd($part);
-}
-
-sub verifyNotOverlap {
- my ($a, $b) = @_;
- $a->{start} + $a->{size} <= $b->{start} || $b->{start} + $b->{size} <= $a->{start};
-}
-sub verifyInside {
- my ($a, $b) = @_;
- $b->{start} <= $a->{start} && $a->{start} + $a->{size} <= $b->{start} + $b->{size};
-}
-
-sub verifyParts_ {
- foreach my $i (@_) {
- foreach (@_) {
- next if !$i || !$_ || $i == $_ || isWholedisk($i) || isExtended($i); #- avoid testing twice for simplicity :-)
- if (isWholedisk($_)) {
- verifyInside($i, $_) or
- cdie sprintf("partition sector #$i->{start} (%s) is not inside whole disk (%s)!",
- formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
- } elsif (isExtended($_)) {
- verifyNotOverlap($i, $_) or
- log::l(sprintf("warning partition sector #$i->{start} (%s) is overlapping with extended partition!",
- formatXiB($i->{size}, 512))); #- only warning for this one is acceptable
- } else {
- verifyNotOverlap($i, $_) or
- cdie sprintf("partitions sector #$i->{start} (%s) and sector #$_->{start} (%s) are overlapping!",
- formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
- }
- }
- }
-}
-sub verifyParts {
- my ($hd) = @_;
- verifyParts_(get_normal_parts($hd));
-}
-sub verifyPrimary {
- my ($pt) = @_;
- $_->{start} > 0 || arch() =~ /^sparc/ || die "partition must NOT start at sector 0" foreach @{$pt->{normal}};
- verifyParts_(@{$pt->{normal}}, $pt->{extended});
-}
-
-sub assign_device_numbers {
- my ($hd) = @_;
-
- my $i = 1;
- my $start = 1;
-
- #- on PPC we need to assign device numbers to the holes too - big FUN!
- #- not if it's an IBM machine using a DOS partition table though
- if (arch() =~ /ppc/ && detect_devices::get_mac_model() !~ /^IBM/) {
- #- first sort the normal parts
- $hd->{primary}{normal} = [sort { $a->{start} <=> $b->{start} } @{$hd->{primary}{normal}} ];
-
- #- now loop through them, assigning partition numbers - reserve one for the holes
- foreach (@{$hd->{primary}{normal}}) {
- if ($_->{start} > $start) {
- log::l("PPC: found a hole on $hd->{prefix} before $_->{start}, skipping device...");
- $i++;
- }
- $_->{device} = $hd->{prefix} . $i++;
- $start = $_->{start} + $_->{size};
- }
- } else {
- foreach (@{$hd->{primary}{raw}}) {
- my $dev = $hd->{prefix} . $i++;
- $_->{device} = $dev;
- }
- foreach (map { $_->{normal} } @{$hd->{extended} || []}) {
- my $dev = $hd->{prefix} . $i++;
- push @{$hd->{partitionsRenumbered}}, [ $_->{device}, $dev ] if $_->{device} && $dev ne $_->{device};
- $_->{device} = $dev;
- }
- }
-
- #- try to figure what the windobe drive letter could be!
- #
- #- first verify there's at least one primary dos partition, otherwise it
- #- means it is a secondary disk and all will be false :(
- my ($c, @others) = grep { isFat($_) } @{$hd->{primary}{normal}};
-
- $i = ord 'C';
- $c->{device_windobe} = chr($i++) if $c;
- $_->{device_windobe} = chr($i++) foreach grep { isFat($_) } map { $_->{normal} } @{$hd->{extended}};
- $_->{device_windobe} = chr($i++) foreach @others;
-}
-
-sub remove_empty_extended {
- my ($hd) = @_;
- my $last = $hd->{primary}{extended} or return;
- @{$hd->{extended}} = grep {
- if ($_->{normal}) {
- $last = $_;
- } else {
- %{$last->{extended}} = $_->{extended} ? %{$_->{extended}} : ();
- }
- $_->{normal};
- } @{$hd->{extended}};
- adjust_main_extended($hd);
-}
-
-sub adjust_main_extended {
- my ($hd) = @_;
-
- if (!is_empty_array_ref $hd->{extended}) {
- my ($l, @l) = @{$hd->{extended}};
-
- # the first is a special case, must recompute its real size
- my $start = round_down($l->{normal}{start} - 1, $hd->{geom}{sectors});
- my $end = $l->{normal}{start} + $l->{normal}{size};
- my $only_linux = 1; my $has_win_lba = 0;
- foreach (map $_->{normal}, $l, @l) {
- $start = min($start, $_->{start});
- $end = max($end, $_->{start} + $_->{size});
- $only_linux &&= isTrueFS($_) || isSwap($_);
- $has_win_lba ||= $_->{type} == 0xc || $_->{type} == 0xe;
- }
- $l->{start} = $hd->{primary}{extended}{start} = $start;
- $l->{size} = $hd->{primary}{extended}{size} = $end - $start;
- }
- unless (@{$hd->{extended} || []} || !$hd->{primary}{extended}) {
- %{$hd->{primary}{extended}} = (); #- modify the raw entry
- delete $hd->{primary}{extended};
- }
- verifyParts($hd); #- verify everything is all right
-}
-
-sub adjust_local_extended {
- my ($hd, $part) = @_;
-
- foreach (@{$hd->{extended} || []}) {
- $_->{normal} == $part or next;
- $_->{size} = $part->{size} + $part->{start} - $_->{start};
- last;
- }
-}
-
-sub get_normal_parts {
- my ($hd) = @_;
-
- @{$hd->{primary}{normal} || []}, map { $_->{normal} } @{$hd->{extended} || []}
-}
-
-sub get_normal_parts_and_holes {
- my ($hd) = @_;
- my ($start, $last) = ($hd->first_usable_sector, $hd->last_usable_sector);
-
- ref($hd) or print("get_normal_parts_and_holes: bad hd" . backtrace(), "\n");
-
- my @l = map {
- my $current = $start;
- $start = $_->{start} + $_->{size};
- my $hole = { start => $current, size => $_->{start} - $current, type => 0, rootDevice => $hd->{device} };
- $hole, $_;
- } sort { $a->{start} <=> $b->{start} } grep { !isWholedisk($_) } get_normal_parts($hd);
-
- push @l, { start => $start, size => $last - $start, type => 0, rootDevice => $hd->{device} };
- grep { $_->{type} || $_->{size} >= $hd->cylinder_size } @l;
-}
-
-sub read_one($$) {
- my ($hd, $sector) = @_;
- my ($pt, $info);
-
- #- it can be safely considered that the first sector is used to probe the partition table
- #- but other sectors (typically for extended partition ones) have to match this type!
- if (!$sector) {
- my @parttype = (
- if_(arch() =~ /^ia64/, 'gpt'),
- arch() =~ /^sparc/ ? ('sun', 'bsd') : ('dos', 'bsd', 'sun', 'mac'),
- );
- foreach ('empty', @parttype, 'lvm_PV', 'unknown') {
- /unknown/ and die "unknown partition table format on disk " . $hd->{file};
- eval {
- require("partition_table_$_.pm");
- bless $hd, "partition_table_$_";
- ($pt, $info) = $hd->read($sector);
- log::l("found a $_ partition table on $hd->{file} at sector $sector");
- };
- $@ or last;
- }
- } else {
- #- keep current blessed object for that, this means it is neccessary to read sector 0 before.
- ($pt, $info) = $hd->read($sector);
- }
-
- my @extended = $hd->hasExtended ? grep { isExtended($_) } @$pt : ();
- my @normal = grep { $_->{size} && $_->{type} && !isExtended($_) } @$pt;
-
- @extended > 1 and die "more than one extended partition";
-
- $_->{rootDevice} = $hd->{device} foreach @normal, @extended;
- { raw => $pt, extended => $extended[0], normal => \@normal, info => $info };
-}
-
-sub read($;$) {
- my ($hd, $clearall) = @_;
- if ($clearall) {
- partition_table_raw::zero_MBR_and_dirty($hd);
- return 1;
- }
- my $pt = read_one($hd, 0) or return 0;
- $hd->{primary} = $pt;
- undef $hd->{extended};
- verifyPrimary($pt);
- eval {
- my $need_removing_empty_extended;
- $pt->{extended} and read_extended($hd, $pt->{extended}, \$need_removing_empty_extended) || return 0;
-
- if ($need_removing_empty_extended) {
- #- special case when hda5 is empty, it must be skipped
- #- (windows XP generates such partition tables)
- remove_empty_extended($hd); #- includes adjust_main_extended
- }
-
- };
- die "extended partition: $@" if $@;
-
- assign_device_numbers($hd);
- remove_empty_extended($hd);
- 1;
-}
-
-sub read_extended {
- my ($hd, $extended, $need_removing_empty_extended) = @_;
-
- my $pt = read_one($hd, $extended->{start}) or return 0;
- $pt = { %$extended, %$pt };
-
- push @{$hd->{extended}}, $pt;
- @{$hd->{extended}} > 100 and die "oops, seems like we're looping here :( (or you have more than 100 extended partitions!)";
-
- if (@{$pt->{normal}} == 0) {
- $$need_removing_empty_extended = 1;
- delete $pt->{normal};
- print "need_removing_empty_extended\n";
- } elsif (@{$pt->{normal}} > 1) {
- die "more than one normal partition in extended partition";
- } else {
- $pt->{normal} = $pt->{normal}[0];
- #- in case of extended partitions, the start sector is local to the partition or to the first extended_part!
- $pt->{normal}{start} += $pt->{start};
-
- #- the following verification can broke an existing partition table that is
- #- correctly read by fdisk or cfdisk. maybe the extended partition can be
- #- recomputed to get correct size.
- if (!verifyInside($pt->{normal}, $extended)) {
- $extended->{size} = $pt->{normal}{start} + $pt->{normal}{size};
- verifyInside($pt->{normal}, $extended) or die "partition $pt->{normal}{device} is not inside its extended partition";
- }
- }
-
- if ($pt->{extended}) {
- $pt->{extended}{start} += $hd->{primary}{extended}{start};
- return read_extended($hd, $pt->{extended}, $need_removing_empty_extended);
- } else {
- 1;
- }
-}
-
-# write the partition table
-sub write {
- my ($hd) = @_;
- $hd->{isDirty} or return;
-
- #- set first primary partition active if no primary partitions are marked as active.
- if (my @l = @{$hd->{primary}{raw}}) {
- foreach (@l) {
- $_->{local_start} = $_->{start};
- $_->{active} ||= 0;
- }
- $l[0]{active} = 0x80 if !grep { $_->{active} } @l;
- }
-
- #- last chance for verification, this make sure if an error is detected,
- #- it will never be writed back on partition table.
- verifyParts($hd);
-
- $hd->write(0, $hd->{primary}{raw}, $hd->{primary}{info}) or die "writing of partition table failed";
-
- #- should be fixed but a extended exist with no real extended partition, that blanks mbr!
- if (arch() !~ /^sparc/) {
- foreach (@{$hd->{extended}}) {
- # in case of extended partitions, the start sector must be local to the partition
- $_->{normal}{local_start} = $_->{normal}{start} - $_->{start};
- $_->{extended} and $_->{extended}{local_start} = $_->{extended}{start} - $hd->{primary}{extended}{start};
-
- $hd->write($_->{start}, $_->{raw}) or die "writing of partition table failed";
- }
- }
- $hd->{isDirty} = 0;
- $hd->{hasBeenDirty} = 1; #- used in undo (to know if undo should believe isDirty or not)
-
- if ($hd->{needKernelReread} && ref($hd->{needKernelReread}) eq 'ARRAY' && $::isStandalone) {
- #- we've only been adding partitions. Try special add_partition (using BLKPG_ADD_PARTITION)
- local *F;
- partition_table_raw::openit($hd, *F) or goto force_reread;
-
- foreach (@{$hd->{needKernelReread}}) {
- c::add_partition(fileno F, $_->{start}, $_->{size}, $_->{device} =~ /(\d+)$/)
- or goto force_reread;
- }
- } elsif ($hd->{needKernelReread}) {
- force_reread:
- #- now sync disk and re-read the partition table
- common::sync();
-
- my @magic_parts = grep { $_->{isMounted} && $_->{real_mntpoint} } get_normal_parts($hd);
- foreach (@magic_parts) {
- syscall_('umount', $_->{real_mntpoint}) or log::l(_("error unmounting %s: %s", $_->{real_mntpoint}, "$!"));
- }
- $hd->kernel_read;
- foreach (@magic_parts) {
- syscall_('mount', , $_->{real_mntpoint}, type2fs($_), c::MS_MGC_VAL()) or log::l(_("mount failed: ") . "$!");
- }
- }
- $hd->{needKernelReread} = 0;
-}
-
-sub active {
- my ($hd, $part) = @_;
-
- $_->{active} = 0 foreach @{$hd->{primary}{normal}};
- $part->{active} = 0x80;
- $hd->{isDirty} = 1;
-}
-
-
-# remove a normal partition from hard drive hd
-sub remove {
- my ($hd, $part) = @_;
- my $i;
-
- #- first search it in the primary partitions
- $i = 0; foreach (@{$hd->{primary}{normal}}) {
- if ($_ eq $part) {
- splice(@{$hd->{primary}{normal}}, $i, 1);
- %$_ = (); #- blank it
-
- $hd->raw_removed($hd->{primary}{raw});
- return $hd->{isDirty} = $hd->{needKernelReread} = 1;
- }
- $i++;
- }
-
- my ($first, $second, $third) = map { $_->{normal} } @{$hd->{extended} || []};
- if ($third && $first eq $part) {
- die "Can't handle removing hda5 when hda6 is not the second partition" if $second->{start} > $third->{start};
- }
-
- #- otherwise search it in extended partitions
- foreach (@{$hd->{extended} || []}) {
- $_->{normal} eq $part or next;
-
- delete $_->{normal}; #- remove it
- remove_empty_extended($hd);
- assign_device_numbers($hd);
-
- return $hd->{isDirty} = $hd->{needKernelReread} = 1;
- }
- 0;
-}
-
-# create of partition at starting at `start', of size `size' and of type `type' (nice comment, uh?)
-sub add_primary {
- my ($hd, $part) = @_;
-
- {
- local $hd->{primary}{normal}; #- save it to fake an addition of $part, that way add_primary do not modify $hd if it fails
- push @{$hd->{primary}{normal}}, $part;
- adjust_main_extended($hd); #- verify
- $hd->raw_add($hd->{primary}{raw}, $part);
- }
- push @{$hd->{primary}{normal}}, $part; #- really do it
-}
-
-sub add_extended {
- arch() =~ /^sparc|ppc/ and die _("Extended partition not supported on this platform");
-
- my ($hd, $part, $extended_type) = @_;
- $extended_type =~ s/Extended_?//;
-
- my $e = $hd->{primary}{extended};
-
- if ($e && !verifyInside($part, $e)) {
- #-die "sorry, can't add outside the main extended partition" unless $::unsafe;
- my $end = $e->{start} + $e->{size};
- my $start = min($e->{start}, $part->{start});
- $end = max($end, $part->{start} + $part->{size}) - $start;
-
- { #- faking a resizing of the main extended partition to test for problems
- local $e->{start} = $start;
- local $e->{size} = $end - $start;
- eval { verifyPrimary($hd->{primary}) };
- $@ and die
-_("You have a hole in your partition table but I can't use it.
-The only solution is to move your primary partitions to have the hole next to the extended partitions.");
- }
- }
-
- if ($e && $part->{start} < $e->{start}) {
- my $l = first (@{$hd->{extended}});
-
- #- the first is a special case, must recompute its real size
- $l->{start} = round_down($l->{normal}{start} - 1, $hd->cylinder_size());
- $l->{size} = $l->{normal}{start} + $l->{normal}{size} - $l->{start};
- my $ext = { %$l };
- unshift @{$hd->{extended}}, { type => 5, raw => [ $part, $ext, {}, {} ], normal => $part, extended => $ext };
- #- size will be autocalculated :)
- } else {
- my ($ext, $ext_size) = is_empty_array_ref($hd->{extended}) ?
- ($hd->{primary}, -1) : #- -1 size will be computed by adjust_main_extended
- (top(@{$hd->{extended}}), $part->{size});
- my %ext = ( type => $extended_type || 5, start => $part->{start}, size => $ext_size );
-
- $hd->raw_add($ext->{raw}, \%ext);
- $ext->{extended} = \%ext;
- push @{$hd->{extended}}, { %ext, raw => [ $part, {}, {}, {} ], normal => $part };
- }
- $part->{start}++; $part->{size}--; #- let it start after the extended partition sector
- adjustStartAndEnd($hd, $part);
-
- adjust_main_extended($hd);
-}
-
-sub add {
- my ($hd, $part, $primaryOrExtended, $forceNoAdjust) = @_;
-
- get_normal_parts($hd) >= ($hd->{device} =~ /^rd/ ? 7 : $hd->{device} =~ /^(sd|ida|cciss|ataraid)/ ? 15 : 63) and cdie "maximum number of partitions handled by linux reached";
-
- $part->{notFormatted} = 1;
- $part->{isFormatted} = 0;
- $part->{rootDevice} = $hd->{device};
- $part->{start} ||= 1 if arch() !~ /^sparc/; #- starting at sector 0 is not allowed
- adjustStartAndEnd($hd, $part) unless $forceNoAdjust;
-
- my $e = $hd->{primary}{extended};
- my $nb_primaries = $hd->{device} =~ /^rd/ ? 3 : 1;
-
- if (arch() =~ /^sparc|ppc/ ||
- $primaryOrExtended eq 'Primary' ||
- $primaryOrExtended !~ /Extended/ && @{$hd->{primary}{normal} || []} < $nb_primaries) {
- eval { add_primary($hd, $part) };
- goto success if !$@;
- }
- eval { add_extended($hd, $part, $primaryOrExtended) } if $hd->hasExtended; #- try adding extended
- if ($@ || !$hd->hasExtended) {
- eval { add_primary($hd, $part) };
- die $@ if $@; #- send the add extended error which should be better
- }
- success:
- assign_device_numbers($hd);
- $hd->{isDirty} = 1;
- push @{$hd->{needKernelReread} ||= []}, $part if !$hd->{needKernelReread} || ref($hd->{needKernelReread}) eq 'ARRAY'
-}
-
-# search for the next partition
-sub next {
- my ($hd, $part) = @_;
-
- first(
- sort { $a->{start} <=> $b->{start} }
- grep { $_->{start} >= $part->{start} + $part->{size} }
- get_normal_parts($hd)
- );
-}
-sub next_start {
- my ($hd, $part) = @_;
- my $next = &next($hd, $part);
- $next ? $next->{start} : $hd->{totalsectors};
-}
-
-sub load {
- my ($hd, $file, $force) = @_;
-
- local *F;
- open F, $file or die _("Error reading file %s", $file);
-
- my $h;
- {
- local $/ = "\0";
- eval <F>;
- }
- $@ and die _("Restoring from file %s failed: %s", $file, $@);
-
- ref $h eq 'ARRAY' or die _("Bad backup file");
-
- my %h; @h{@fields2save} = @$h;
-
- $h{totalsectors} == $hd->{totalsectors} or $force or cdie "bad totalsectors";
-
- #- unsure we don't modify totalsectors
- local $hd->{totalsectors};
-
- @{$hd}{@fields2save} = @$h;
-
- delete @$_{qw(isMounted isFormatted notFormatted toFormat toFormatUnsure)} foreach get_normal_parts($hd);
- $hd->{isDirty} = $hd->{needKernelReread} = 1;
-}
-
-sub save {
- my ($hd, $file) = @_;
- my @h = @{$hd}{@fields2save};
- local *F;
- require Data::Dumper;
- open F, ">$file"
- and print F Data::Dumper->Dump([\@h], ['$h']), "\0"
- or die _("Error writing to file %s", $file);
-}
diff --git a/perl-install/patch/patch-oem-hp.pl b/perl-install/patch/patch-oem-hp.pl
deleted file mode 100644
index 0a5b0b51e..000000000
--- a/perl-install/patch/patch-oem-hp.pl
+++ /dev/null
@@ -1,323 +0,0 @@
-use modules;
-package modules;
-my $old_load_raw = \&load_raw;
-undef *load_raw;
-*load_raw = sub {
- &$old_load_raw;
-
- my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } grep { $_->[0] !~ /ignore/ } @_;
- foreach (@l) {
- if ($_->[0] eq 'ehci-hcd') {
- add_alias('usb-interface1', $_->[0]);
- }
- }
-
- if (get_alias("usb-interface") || get_alias("usb-interface1")) {
- unless (-e "/proc/bus/usb/devices") {
- require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
- #- ensure keyboard is working, the kernel must do the job the BIOS was doing
- sleep 4;
- load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
- }
- }
-};
-
-my $old_load = \&load;
-undef *load;
-*load = sub {
- &$old_load;
-
- #- hack to get back usb-interface (even if already loaded by stage1)
- #- NOTE load_multi is not used for that so not overloaded to fix that too.
- if ($_[0] =~ /usb-[uo]hci/ && !get_alias("usb-interface")) {
- add_alias('usb-interface', $_[0]);
- } elsif ($_[0] eq 'ehci-hcd' && !get_alias("usb-interface1")) {
- add_alias('usb-interface1', $_[0]);
- }
-
- if (get_alias("usb-interface") || get_alias("usb-interface1")) {
- unless (-e "/proc/bus/usb/devices") {
- require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
- #- ensure keyboard is working, the kernel must do the job the BIOS was doing
- sleep 4;
- load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
- }
- }
-};
-
-#- ensure it is loaded using this patch.
-$::noauto or modules::load_thiskind("usb");
-sleep 2;
-
-use install_steps;
-package install_steps;
-
-my $old_beforeInstallPackages = \&beforeInstallPackages;
-undef *beforeInstallPackages;
-*beforeInstallPackages = sub {
- &$old_beforeInstallPackages;
-
- my ($o) = @_;
- mkdir "$o->{prefix}$_" foreach qw(/boot /usr /usr/share /usr/share/mdk);
- install_any::getAndSaveFile("Mandrake/base/oem-message-graphic", "$o->{prefix}/boot/oem-message-graphic");
- install_any::getAndSaveFile("Mandrake/base/oem-background.png", "$o->{prefix}/usr/share/mdk/oem-background.png");
-};
-
-my $old_afterInstallPackages = \&afterInstallPackages;
-undef *afterInstallPackages;
-*afterInstallPackages = sub {
- &$old_afterInstallPackages;
-
- my ($o) = @_;
-
- #- lilo image.
- rename "$o->{prefix}/boot/lilo-graphic/message", "$o->{prefix}/boot/lilo-graphic/message.orig";
- system "chroot", $o->{prefix}, "cp", "-f", "/boot/oem-message-graphic", "/boot/lilo-graphic/message";
-
- #- KDE desktop background.
- if (-e "$o->{prefix}/usr/share/config/kdesktoprc") {
- update_gnomekderc("$o->{prefix}/usr/share/config/kdesktoprc", "Desktop0",
- MultiWallpaperMode => "NoMulti",
- Wallpaper => "/usr/share/mdk/oem-background.png",
- WallpaperMode => "Scaled",
- );
- }
- #- GNOME desktop background.
- if (-e "$o->{prefix}/etc/gnome/config/Background") {
- update_gnomekderc("$o->{prefix}/etc/gnome/config/Background", "Default",
- wallpaper => "/usr/share/mdk/oem-background.png",
- wallpaperAlign => "3",
- );
- }
-
- #- make sure no error can be forwarded, test staroffice installed and OpenOffice.org,
- #- remove the first if the second is installed.
- eval {
- if (!$o->{isUpgrade} && -e "$o->{prefix}/usr/lib/openoffice/program/soffice.bin" && grep { -e "$o->{prefix}/usr/lib/office60_$_/program/soffice.bin" } qw(de en es fr it)) {
- require run_program;
- log::l("removing OpenOffice.org as staroffice is installed");
- run_program::rooted($o->{prefix}, "rpm", "-e", "OpenOffice.org");
- }
- };
-};
-
-use install_any;
-package install_any;
-
-undef *copy_advertising;
-*copy_advertising = sub {
- my ($o) = @_;
-
- return if $::rootwidth < 800;
-
- my $f;
- my $source_dir = "Mandrake/share/advertising";
- foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
- $f = getFile("$source_dir$_/list") or next;
- $source_dir = "$source_dir$_";
- }
- if (my @files = <$f>) {
- my $dir = "$o->{prefix}/tmp/drakx-images";
- mkdir $dir;
- unlink glob_("$dir/*");
- foreach (@files) {
- chomp;
- getAndSaveFile("$source_dir/$_", "$dir/$_");
- s/\.png/\.pl/;
- getAndSaveFile("$source_dir/$_", "$dir/$_");
- s/\.pl/_icon\.png/;
- getAndSaveFile("$source_dir/$_", "$dir/$_");
- s/_icon\.png/\.png/;
- }
- @advertising_images = map { $_ && -e "$dir/$_" ? ("$dir/$_") : () } @files;
- }
-};
-
-#undef *allowNVIDIA_rpms;
-#*allowNVIDIA_rpms = sub {
-# my ($packages) = @_;
-# require pkgs;
-# if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
-# #- at this point, we can allow using NVIDIA 3D acceleration packages.
-# my @rpms;
-# foreach (keys %{$packages->{names}}) {
-# my ($ext, $version, $release) = /kernel[^-]*(-smp|-enterprise|-secure)?(?:-(\d.*?)\.(\d+\.\d+mdk))?$/ or next;
-# my $p = pkgs::packageByName($packages, $_);
-# pkgs::packageSelectedOrInstalled($p) or next;
-# $version or ($version, $release) = (pkgs::packageVersion($p), pkgs::packageRelease($p));
-# my $name = "NVIDIA_kernel-$version-$release$ext";
-# pkgs::packageByName($packages, $name) or return;
-# push @rpms, $name;
-# }
-# @rpms > 0 or return;
-# return [ @rpms, "NVIDIA_GLX" ];
-# }
-#};
-
-use detect_devices;
-package detect_devices;
-
-undef *usbMice;
-*usbMice = sub { grep { ($_->{media_type} =~ /\|Mouse/ || $_->{driver} =~ /Mouse:USB/) &&
- $_->{driver} !~ /Tablet:wacom/} usb_probe() };
-
-use Xconfigurator;
-package Xconfigurator;
-
-undef *cardConfigurationAuto;
-*cardConfigurationAuto = sub {
- my @cards;
- if (my @c = grep { $_->{driver} =~ /(Card|Server):/ } detect_devices::probeall()) {
- @c >= 2 && $c[0]{description} eq $c[1]{description} && $c[0]{description} =~ /82830 CGC/ and shift @c;
- foreach my $i (0..$#c) {
- local $_ = $c[$i]->{driver};
- my $card = { identifier => ($c[$i]{description} . (@c > 1 && " $i")) };
- $card->{type} = $1 if /Card:(.*)/;
- $card->{server} = $1 if /Server:(.*)/;
- $card->{driver} = $1 if /Driver:(.*)/;
- $card->{flags}{needVideoRam} = /86c368|S3 Inc|Tseng.*ET6\d00/;
- $card->{busid} = "PCI:$c[$i]{pci_bus}:$c[$i]{pci_device}:$c[$i]{pci_function}";
- push @{$card->{lines}}, @{$lines{$card->{identifier}} || []};
- push @cards, $card;
- }
- }
- #- take a default on sparc if nothing has been found.
- if (arch() =~ /^sparc/ && !@cards) {
- log::l("Using probe with /proc/fb as nothing has been found!");
- local $_ = cat_("/proc/fb");
- if (/Mach64/) { push @cards, { server => "Mach64" } }
- elsif (/Permedia2/) { push @cards, { server => "3DLabs" } }
- else { push @cards, { server => "Sun24" } }
- }
- #- special case for dual head card using only one busid.
- @cards = map { my $dup = $_->{identifier} =~ /MGA G[45]50/ ? 2 : 1;
- if ($dup > 1) {
- my @result;
- my $orig = $_;
- foreach (1..$dup) {
- my $card = {};
- add2hash($card, $orig);
- push @result, $card;
- }
- @result;
- } else {
- ($_);
- }
- } @cards;
- #- make sure no type are already used, duplicate both screen
- #- and rename type (because used as id).
- if (@cards > 1) {
- my $card = 1;
- foreach (@cards) {
- updateCardAccordingName($_, $_->{type}) if $_->{type};
- $_->{type} = "$_->{type} $card";
- $card++;
- }
- }
- #- in case of only one cards, remove all busid reference, this will avoid
- #- need of change of it if the card is moved.
- #- on many PPC machines, card is on-board, busid is important, leave?
- @cards == 1 and delete $cards[0]{busid} if arch() !~ /ppc/;
- @cards;
-};
-
-use mouse;
-package mouse;
-undef *detect;
-*detect = sub {
- if (arch() =~ /^sparc/) {
- return fullname2mouse("sunmouse|Sun - Mouse");
- }
- if (arch() eq "ppc") {
- return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ?
- "USB|1 button" :
- #- No need to search for an ADB mouse. If I did, the PPC kernel would
- #- find one whether or not I had one installed! So.. default to it.
- "busmouse|1 button");
- }
-
- my @wacom;
- my $fast_mouse_probe = sub {
- my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1);
-
- if (modules::get_alias("usb-interface")) {
- if (my (@l) = detect_devices::usbMice()) {
- log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l;
- eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
- if (!$@ && detect_devices::tryOpen("usbmouse")) {
- my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Generic");
- $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic).
- return $mouse;
- }
- eval { modules::unload($_) foreach qw(usbmouse mousedev hid) };
- }
- }
- $auxmouse;
- };
-
- if (modules::get_alias("usb-interface")) {
- my $keep_mouse;
- if (my (@l) = detect_devices::usbWacom()) {
- log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
- eval { modules::load("wacom"); modules::load("evdev"); };
- unless ($@) {
- foreach (0..$#l) {
- detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_";
- }
- }
- $keep_mouse or eval { modules::unload("evdev"); modules::unload("wacom"); };
- }
- }
-
- #- at this level, not all possible mice are detected so avoid invoking serial_probe
- #- which takes a while for its probe.
- if ($::isStandalone) {
- my $mouse = $fast_mouse_probe->();
- $mouse and return ($mouse, @wacom);
- }
-
- #- probe serial device to make sure a wacom has been detected.
- eval { modules::load("serial") };
- my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom;
-
- if (!$::isStandalone) {
- my $mouse = $fast_mouse_probe->();
- $r && $mouse and $r->{auxmouse} = $mouse; #- we kept the auxilliary mouse as PS/2.
- $r and return ($r, @wacom);
- $mouse and return ($mouse, @wacom);
- } else {
- $r and return ($r, @wacom);
- }
-
- #- in case only a wacom has been found, assume an inexistant mouse (necessary).
- @wacom and return { CLASS => 'MOUSE',
- nbuttons => 2,
- device => "nothing",
- MOUSETYPE => "Microsoft",
- XMOUSETYPE => "Microsoft"}, @wacom;
-
- if (!modules::get_alias("usb-interface") && detect_devices::is_a_recent_computer() && $::isInstall && !$::noauto) {
- #- special case for non detected usb interface on a box with no mouse.
- #- we *must* find out if there really is no usb, otherwise the box may
- #- not be accessible via the keyboard (if the keyboard is USB)
- #- the only way to know this is to make a full pci probe
- modules::load_thiskind("usb", '', 'unsafe');
- if (my $mouse = $fast_mouse_probe->()) {
- return $mouse;
- }
- }
-
- if (modules::get_alias("usb-interface")) {
- eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
- sleep 1;
- if (!$@ && detect_devices::tryOpen("usbmouse")) {
- #- defaults to generic USB mouse on usbmouse.
- log::l("defaulting to usb generic mouse");
- return fullname2mouse("USB|Generic", unsafe => 1);
- }
- }
-
- #- defaults to generic serial mouse on ttyS0.
- #- Oops? using return let return a hash ref, if not using it, it return a list directly :-)
- return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1);
-};
diff --git a/perl-install/perl2etags b/perl-install/perl2etags
deleted file mode 100755
index 6eed722c0..000000000
--- a/perl-install/perl2etags
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/usr/bin/perl -p
-
-if (/^ / ... !/^ /) {
- ($package) = /(.*).pm,/;
- $package =~ s|/|::|g;
-}
-
-s/(\x7F)(sub\s+)?(\w+)(\([^)]*\))?/$1${package}::$3/;
diff --git a/perl-install/pixmaps/X.png b/perl-install/pixmaps/X.png
deleted file mode 100644
index c355a6c67..000000000
--- a/perl-install/pixmaps/X.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/arrow_down.xpm b/perl-install/pixmaps/arrow_down.xpm
deleted file mode 100644
index 30cca10b1..000000000
--- a/perl-install/pixmaps/arrow_down.xpm
+++ /dev/null
@@ -1,14 +0,0 @@
-/* XPM */
-static char * arrow_down_xpm[] = {
-"6 8 3 1",
-" c None",
-". c #BABEDA",
-"+ c #000000",
-"..++..",
-"..++..",
-"..++..",
-"..++..",
-"++++++",
-"++++++",
-".++++.",
-"..++.."};
diff --git a/perl-install/pixmaps/arrow_up.xpm b/perl-install/pixmaps/arrow_up.xpm
deleted file mode 100644
index fc3c53131..000000000
--- a/perl-install/pixmaps/arrow_up.xpm
+++ /dev/null
@@ -1,14 +0,0 @@
-/* XPM */
-static char * arrow_up_xpm[] = {
-"6 8 3 1",
-" c None",
-". c #999ABD",
-"+ c #000000",
-"..++..",
-".++++.",
-"++++++",
-"++++++",
-"..++..",
-"..++..",
-"..++..",
-"..++.."};
diff --git a/perl-install/pixmaps/bootdisk.png b/perl-install/pixmaps/bootdisk.png
deleted file mode 100644
index 0d29e613d..000000000
--- a/perl-install/pixmaps/bootdisk.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/bootloader.png b/perl-install/pixmaps/bootloader.png
deleted file mode 100644
index 03c2010f7..000000000
--- a/perl-install/pixmaps/bootloader.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/colors.png b/perl-install/pixmaps/colors.png
deleted file mode 100644
index 8de1929b4..000000000
--- a/perl-install/pixmaps/colors.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/colors16.png b/perl-install/pixmaps/colors16.png
deleted file mode 100644
index 76de54753..000000000
--- a/perl-install/pixmaps/colors16.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/colors8.png b/perl-install/pixmaps/colors8.png
deleted file mode 100644
index 904517e2f..000000000
--- a/perl-install/pixmaps/colors8.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/default.png b/perl-install/pixmaps/default.png
deleted file mode 100644
index bcbca644d..000000000
--- a/perl-install/pixmaps/default.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/eth_card_mini.png b/perl-install/pixmaps/eth_card_mini.png
deleted file mode 100644
index 0af32dbaf..000000000
--- a/perl-install/pixmaps/eth_card_mini.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/exit.png b/perl-install/pixmaps/exit.png
deleted file mode 100644
index 7e4e1e1d5..000000000
--- a/perl-install/pixmaps/exit.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/harddrive.png b/perl-install/pixmaps/harddrive.png
deleted file mode 100644
index d0b4adf71..000000000
--- a/perl-install/pixmaps/harddrive.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/keyboard.png b/perl-install/pixmaps/keyboard.png
deleted file mode 100644
index e5ce33e37..000000000
--- a/perl-install/pixmaps/keyboard.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/language.png b/perl-install/pixmaps/language.png
deleted file mode 100644
index 0ad06711f..000000000
--- a/perl-install/pixmaps/language.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/monitor-1024.png b/perl-install/pixmaps/monitor-1024.png
deleted file mode 100644
index 6ed801825..000000000
--- a/perl-install/pixmaps/monitor-1024.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/monitor-1280.png b/perl-install/pixmaps/monitor-1280.png
deleted file mode 100644
index b338ecb28..000000000
--- a/perl-install/pixmaps/monitor-1280.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/monitor-640.png b/perl-install/pixmaps/monitor-640.png
deleted file mode 100644
index e0738b936..000000000
--- a/perl-install/pixmaps/monitor-640.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/monitor-800.png b/perl-install/pixmaps/monitor-800.png
deleted file mode 100644
index 04f4b861c..000000000
--- a/perl-install/pixmaps/monitor-800.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/monitor.png b/perl-install/pixmaps/monitor.png
deleted file mode 100644
index bacf844ba..000000000
--- a/perl-install/pixmaps/monitor.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/mouse.png b/perl-install/pixmaps/mouse.png
deleted file mode 100644
index dfd58624a..000000000
--- a/perl-install/pixmaps/mouse.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/mouse_3b+.xpm b/perl-install/pixmaps/mouse_3b+.xpm
deleted file mode 100644
index b424fc722..000000000
--- a/perl-install/pixmaps/mouse_3b+.xpm
+++ /dev/null
@@ -1,386 +0,0 @@
-/* XPM */
-static char * mouse_3b+_xpm[] = {
-"210 350 33 1",
-" c None",
-". c #020202",
-"+ c #142753",
-"@ c #FE9A02",
-"# c #BD8B25",
-"$ c #9E9EC1",
-"% c #525E81",
-"& c #F2AD19",
-"* c #A3A4C3",
-"= c #7B673F",
-"- c #6F7892",
-"; c #4B5576",
-"> c #FEB212",
-", c #77819E",
-"' c #FEBA20",
-") c #414A66",
-"! c #F2B226",
-"~ c #AF8F4B",
-"{ c #E6AA32",
-"] c #F2B22A",
-"^ c #384365",
-"/ c #0A1128",
-"( c #33395F",
-"_ c #8089A6",
-": c #AEB2CF",
-"< c #898BA4",
-"[ c #0F1C3D",
-"} c #BABEDA",
-"| c #6D6E91",
-"1 c #A9ADCA",
-"2 c #283861",
-"3 c #999ABD",
-"4 c #606C8C",
-" |4;-333[/[ ",
-" 44;,333[[/ ",
-" 44)_33-[/[ ",
-" 4%;_33-[[/ ",
-" 4%)3334[/[ ",
-" %4)$33;[/ ",
-" 4%;$33;[/ ",
-" %%%333)[[ ",
-" %%%3332[/ ",
-" %%%3332[/ ",
-" %%%$332[/ ",
-" |%;-33<2[[ ",
-" 4%;|333[// ",
-" %%)4333[[[ ",
-" 4;;|33<[/[ ",
-" 4;;4333[[/ ",
-" 4%;|333[[[ ",
-" %%;_33<[[/ ",
-" %%)_333[[[ ",
-" %%)_333[[/ ",
-" ;;),33<[[[ ",
-" ;;)_333[[/ ",
-" ;;^,333[[[ ",
-" %))433<[[/ ",
-" 4;)4333[[[ ",
-" 4;;-333[[/ ",
-" %;)433<+[[ ",
-" %;)43332[/ ",
-" ;)^|33<([[ ",
-" ;)%3332[/ ",
-" ;^;3332[[ ",
-" ;;;333^[[ ",
-" 4%)$33%[[ ",
-" ,4^33$%+[++ ",
-" $34^333,2++22 ",
-" 13_%-33333)2222 ",
-" 33_4_333333<;22++ ",
-" ,,4_3$33333$3%2+++ ",
-" %%433333333333%[[[ ",
-" ;)^333333333333+/[ ",
-" ))2$33333333333([[ ",
-" ;;^$33<33333333)[[ ",
-" ))^$33333333333%[/[ ",
-" ;)^,333333<3333-[[[ ",
-" ;;),333<3333333_+/[ ",
-" ;))_333333333333+[[ ",
-" ;))|33333333<3332[[ ",
-" %)^|333333333333;/[ ",
-" %%)4333333333333%[[[ ",
-" _4;|333333333333-[[[ ",
-" ,%;-|;%%%))%%%%4+[+ ",
-" 1:1*<%(++++[++[+[+[+[2(%-,_, ",
-" :1111$$<|)2[+[+++))+++[++2^%|,,,,,, ",
-" ::::1$3<,||-,<3:}}}}}:}}}}:33,4-%44--,-,-- ",
-" :::*$3_-,<1}}}}}}}}}}}}}}:}}:}:}}}}1_-%%4||4-4 ",
-" :::1$3_,_$}}}}}}}:1**$$33333333$$$*1::}}}}1,;;44|4| ",
-" :::1*<,4),}}::1*333333333$3$3333$3333333$}}:},22);%%444% ",
-" ::::*<4,{;2+}}3333333333$<$<33333333<33333331}}2+[%=2);%%44 ",
-" :::$<-<&>!#++,}*333333333$3$3333333<3$333333331_+[(>>#=2^;;%%% ",
-" :::*3-,{'>>>>2+;}:3333333333$<3333333$$<333333333;++=>'>&{=2^);;;% ",
-" ::13--{>>>>>>>=[+}}333333<3333$333<3333$3$3333333$2[+#>>>>>&#;(^);;; ",
-" ::1*<-~>>>>>>>>&#++$}$333333333333333333$<$<3333333<+++>'>>>>'>>#22^))); ",
-" ::13,='''>>&&@&>>#+[-}}333333333333333333$333333333$-+[)>>>>>>>>>>&=22)))) ",
-" ::11<-~'>&&@@@@@>>>>++%:}33333333333333333333333<3333$4[+=>>>>>>>>>>>'#22^)))^ ",
-" }:1*,-&''&@@@@@@@>>'>)+(}}1$333333<333333333333333<3331^++#>>'>>>>>>>>>>{;+^^^^^ ",
-" :1*34~''&@@@@@@@@&>>>&=++}}}333333333<33333333333$33333}+++#>>>>>'>>>>>>>>'=+2^^^( ",
-" ::1<-#'&@@@@@@@@@@>>>>>=[+3}}1333333333333<3333333333333}+++''>>>>>>'>>>>>>>'#2+2^2^ ",
-" :1*_4{'&@@@@@@@@@@'>>>>>#+[3}}:3333<$3$%[[++[+23333$<3$313+[(>>>'>>>>>>>>>>>>'>{^22^22 ",
-" ::3,=!'@@@@@@@@@@@&>>>>>>#++,}}}*33333(^2+[[[[[+((,33$3331<++)>>>>>'>>>>'>>'>>>>>&)22222 ",
-" 11$,,!>@@@@@@@@@@@&>>>>>>>&+[|}}}:33333[/..../././[-3333$3}|+[=>>>>>>>'>>>>>>>>>>>>&=+22222 ",
-" :13--'>@@@@@@@@@@@@>>>>'>>>>++%}}:}33333+.///./././[-3<3333}|[+=>>>>>>>>>>>'>>>>>>>>>>=+2222+ ",
-" :*3-,>&@@@@@@@@@@@&>>'>>>>>>>2+)}}}}13333^(2[[[[[[+(^_$$3$3$}%+[#>>>'>>>>'>>>>>>>>>>>>&&=+2+2++ ",
-" 1*3-~>@@@@@@@@@@@@@>>>>>>>>>>>)[)}}}}}3333++[+[+[++++[,33<$31}^+[#>>>>>>>>>>>>>'>>>>>>>>>&=+2+2+ ",
-" 113-->>@@@@@@@@@@@@>>>>>>>>>>>>)+2:}}:}1333+..........[-33$331})++#>>>>>'>>>>'>>>>>>>>>>>>&>=+++++ ",
-" 1*$-='@@@@@@@@@@@@@>>>>>>'>>>&>>=+[}}}}}:$33[//////////[,3<$331}2+[&>>'>>>>'>>>>>>>'>>>>>>>>>>=+2+++ ",
-" 11*_,'&@@@@@@@@@@@@>>>>'>>>>>>>>>=++}:}}}}*33%%^[////[2%%_3$3331:[++>>>>>>>>>>>>>'>>>>>>>>>>>>>&=++2++ ",
-" :*3,=!>@@@@@@@@@@@@&>>>>>>>>'>>>>>=+[}}}}:}:33++[++++[+[++,333$3:}+++>>>>>'>>>>'>>>>>>>'>>>>>>>>>>)+++++ ",
-" 1**_-!&@@@@@@@@@@@@>>>>>>>'>>>>>>>>#++<}:}}}}*3+..........[-3$<33}:+[(>>'>>>>'>>>>>>>'>>>>>>>>>>>>>>^2++++ ",
-" 1**_4{>@@@@@@@@@@@@&>>>>'>>>>>>>>>>>#[+3}}}}}::3+//////////[,33$33}$++)>>>>>>>>>>>>'>>>>>>>>>>>>>>>>>&++2[++ ",
-" 1*<4{>@@@@@@@@@@@@&>>>>>>>>'>>'>>>>>#++3}:}}}}}$%%^[////[2%%<3$<33}3[[)>>>'>>>>>'>>>>>>'>>>>>>>>>>>>>>@2++[++ ",
-" 1*<-~&@@@@@@@@@@@@@>>>>'>>>>>>>>>'>>>#+[3}}}:}}}1^^2[[[[[[+^^,33333}3++)>>>>>'>>>>>>>>>>>>'>>'>>>>>>>>>!#+++[+ ",
-" 1*3,-'@@@@@@@@@@@@>>>>>>>>>>>'>>>>>>>>][+_:}}}}:}}+../...../.[,333$$:3+[;>>>>>>>>>>'>>'>>>>>>>>>>>>>>>>>>>=+++++ ",
-" 1*3,-&>@@@@@@@@@@@@>>>>'>>>'>>>>'>>>>>>'[+|}:}}}}}:+[///[/[///+,3333$}<++='>>'>>>'>>>>>>>'>>>>>>>'>>>>>>>>>>^+++[+ ",
-" **<4{>@@@@@@@@@@@&>>>>>>>>>>>>>>>>'>>>>>++|}}}}:}}}4%^[////[+;%<33331}<++=>>>>>>>>>>'>>>>>>'>>'>>>>>>>>>>>>>@++++[+ ",
-" 13<-~'@@@@@@@@@@@@>>>>'>>>'>>>>>>>>>>'>>>++4}:}}}}:}++++[+++++++-33333}4++='>>>>'>>>>>>'>>>>>>>>>>>>'>>>>>>>>>#++++[ ",
-" **3-,'@@@@@@@@@@@&>>'>>>>>>>>'>>'>>>>>>'>][+|}}}:}}}:+..........[-33333}-[+=>>'>>&>>>>>>>>>>>>>>>'>>>>>>>>>>>>>>=+++++ ",
-" **_=!>@@@@@@@@@@@>>>>>>>>>>>>>>>>>>>'>>>>'++4}}}}}}}}[//////////[,333$3}4++='>>>>>>'>>>>>'>>'>>'>>>>>>>'>>>'>>>>>^++[++ ",
-" *3_%{>@@@@@@@@@@>'>>>>>'>>>>>>>>>>'>>>>>>>&^+|:}}}:}}}|4)[/////2%%<333$$}|++=>>>>>>>>>>'>>>>>>>>>>>'>>>>>>>>&>>>>>#++++[ ",
-" **<,,'&@@@@@@@@@@>>>>'>>>>'>>>>'>>>>>>>>>>>>)+;}}:}}}:}+++++++++++[,3333$}4++#'>>'>>>>'>>>>>'>>>>>>>>>'>>>>>>&&>>>>>=+++[[ ",
-" *3,4&>@@@@@@@@@&>>'>>>>>>>>>'>>>'>>>>>>>>>>>)+^}}}}}}}}+..........[-3333$}|++#>>>>>'>>>>>'>>>>'>>>>>>>>>>>>>>>>@>>>>>(+++++ ",
-" *$_4#'@@@@@@@@@@>>>>>>>>>'>>>>>>>>>'>>>>>>>>>)+^}}}:}}}:+//////////[,3333*}4[+#'>>>>>>>>>>>>>>>>>'>>'>>>>'>>>>>>>&>>>>@[+[+[ ",
-" **<-~>&@@@@@@@@>>>>>'>>'>>>>>>>>>>>>>'>>'>>>>>)+):}}}:}}}))2[[[[[[+^^-3333$}|++#>>>>>'>>>>>'>>>>>>>>>>>'>>>>>>>>>&&>>>!>=+++[+ ",
-" $3_4&>@@@@@@@@@>>>>>>>>>>>>>>'>>'>>>>>>>>>>>>>)+)}}}}}}:}+[[[[[[[[[[[,33333}4++#'>>>>>>'>>>>>'>>'>>>>>>>>>>'>>>>>>>@>>>>>^[++[ ",
-" *3<4~'@@@@@@@@&>>>>>>>>>'>>>>>>>>>>>>>>>>'>>>>>)+):}}:}}}:+..........[-3333$}|++#>'>>>>>>>>>>>>>>>>>'>>>>'>>>'>>>>>>&@>>>>#++[++ ",
-" $3<,='>@@@@@@@@&>>>>>>>'>>>'>>>>'>>>'>>>'>>>'>>>)+)}}}}}}}}+[[[[[[[[[[[,33333};++#>>>'>>>>'>>>>>'>>>>>>'>>>>>>>>'>>>>>@@>>>>=+[[[+ ",
-" $$_4{>@@@@@@@&>>>>>>'>>>>>>>>'>>>>>>>'>>>>>>>>>>)+):}}}:}}}44^[/////2%%,33333})[+#>>>>>'>>>>>'>>>>'>>>>>>>>>>>>>>>>>>>>@&>>>&+++[+ ",
-" $3_-~!&@@@@@@@&>>>>'>>>>>>>>>>>>>>>'>>>>>>>>>>>>>)+)}:}}}:}:+[[[/[[[[[[+-3333<})++#'>>>>>>>>'>>>>>>>>'>>>>'>>'>>>>>>>>>>@@>>>>#[++[+ ",
-" 33,4!>@@@@@@@>>>>>>>>>>>'>>>>>>>'>>>>>>>>'>>>>>>>)+)}}:}}}}}+..........[-3333$})++#>>>>>>'>>>>'>>>>>>>>>>>>>>>>>>>>>>>>>>@@&>&&2+++[ ",
-" $3_4~'&@@@@@@>>>>>>>>>>'>>>'>>'>>>>>>>>>'>>>'>>>>>)+)}}}}:}}}[[[[[[[[[[[[,3<333}^++#'>>'>>>>>>>>>'>>>>>'>>>>'>>>'>>'>>>>>>@@@>>>#+[+[+ ",
-" 33,-'>@@@@@@>>>>>>>>>>>>>>>>>>>>>>>>>'>>>>>>>>>>>>)+):}}}}}:}|4^[/////2%%<3$33$})[+#>>>>>>>>>>>>>>>>'>>>>'>>>>>>>>>>>>>>>>@@@@>>>)+[+[ ",
-" $3_4#'&@@@@@>>>>>>'>>'>>>>>>>>>>>'>>'>>>>>>>>>>>>>>)+)}}:}}}}}+[[[[[[[[[[+,33333})++#'>>>>'>>'>>>>>'>>>>>>>>>>>'>>>>>>>>>>>>@@@&>>{[++[+ ",
-" 3_,=>>@@@@@>>>>>>>>>>>>>>>>'>>'>>>>>>>>>>>'>>>>>>>>)+^}}}:}}}}+..........[-33333})[+#>>>>>>>>>>>'>>>>>'>>>>>'>>>'>>>'>>>>>>>@@@@&>>=[++[[ ",
-" $<_4{>&@@@@>>>'>>'>>>>>>>'>>>>>>>>>'>>>>'>>>>'>>>>>>)+^}}}}}:}:+[[[[[[[[[[[-333$1}4++#'>>'>>>>>>>>>>>>>>>'>>>>>>>>>'>>>'>>>>>@@@@@>>{[+[+[ ",
-" 3<-->>@@@@&>>>>>>>>'>>'>>>>>>>>'>>>>>'>>>>>>>>>>>>>>)+)}}}}}}}}44^[/////24|3333$:}4[+#>>>>'>>'>>>'>>>>>>>>'>>>>>>>>>>>>>>>>>>&@@@@&>>=++[[+ ",
-" 33,4&>&@@@@>>>>>>>>>>>>>>>>>>'>>>>'>>>>>>>>'>>>>'>>>>)[)}:}:}}}}+[[[[[[[[[[[31333}}|++#'>>>>>>>>'>>>'>>'>>>>>'>>>>'>>>>>>>>>>>>@@@@@&>&+++[[ ",
-" 3<-->>@@@&'>'>>'>>>>>>>'>>'>>>>>>>>>>>>>'>>>>'>>>>>>>++%}}}}}:}}+..........[<}::}}}4++#>>>>'>>>>>>>>>>>>>>>>>>>'>>>>>'>>>'>>>>>@@@@@@&>=+[+[+ ",
-" 3<_%&>&@@@>>>>>>>>'>>'>>>>>>>>>>>'>>>>>>>>>>>>>>>>>>>>++4}}}}}}}:++[+++[+[+++3}}}}}}4++#>>>>>>'>>>>>>>'>>>>>'>>>>>>>>>>>'>>>'>>>@@@@@@@'&+++[[ ",
-" 3<-,'>@@@>>>>'>>>>>>>>>>>>>'>>'>>>>>>'>>>>'>>>'>>>>>>>++|}:}}:}}}4|^[////[244*}}}}}}|+[=>>>>>>>>>>>'>>>>>'>>>>>>>>>>>>>>>>>>>>>>@@@@@@@&>=++[+[ ",
-" $<_4&>>@@>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>'>>>>>>>>'>>>>>++4}}}}}}:}+[///[////[[3:}:}}}4++='>>>>>>>'>>>>>>>>>>>>>'>>'>>>'>>>>>>>>>>&@@@@@@&>&++[[[ ",
-" 3_-->>@@>>'>>>>>>>>'>>'>>>>>'>>>>>>'>>>>>>>'>>>>>>>>>>&++|:}}:}}}}+..........[3}}}}}:3++=>>'>>'>>>>>>>>'>>>>'>>>>>>'>>>>>'>>>>>>>@@@@@@@@&>=+++[ ",
-" <<_%&>'@&>>>>'>>>>'>>>>>>>>>>>>'>>'>>>'>>>>>>>'>>>>>>>>{[+4}}}}}:}}[++[+++[+++[3:}:}}}3++='>>>>>>>>>'>>>>>'>>>>>>'>>>>>>>>>>'>>>>>&@@@@@@@@>{[++[[ ",
-" 3<,='>>@>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>'>>>>>>'>>'>>>&~++$}}:}}}:}3<%[.././^<3:}}}}}:3[[=>>'>>>>'>>>'>>>>>>>>'>>>>>>>'>>>>>>>>>>>@@@@@@@@@&&=[++[ ",
-" <3,4{!>&&>>>>>>>>>>>>>'>>>>'>>>>>'>>>>>>>>>'>>>>>>>>>>>>#[+<}}}}}}}}+[[[[[[[[[[+_}}}}}}3+[)>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>'>>>>'>>>>@@@@@@@@@@&{[+[[[ ",
-" <_,|>>&&>>>'>>>>>>>'>>>>>>>>>>'>>>>>>'>>>>>>>>>>'>>>>>>>#++3}}:}}}}:+..........[3}:}}}:}++)>>>>>>>>>>>>>>>>'>>>>>>'>>>>>>>>'>>>>>>'@@@@@@@@@@@>;++[+ ",
-" 3<_4~>>&>>>>>>'>>'>>>>>>>'>>>>>>>>>>'>>>'>>>>>'>>>>'>>>>>=++3}}}}:}}}+[+[++[+[+++<}}}}}}}[+)>>>>>>'>>'>>>>>>>>'>>>>>>'>>>>>>>>>>>>>&@@@@@@@@@@@>#++[[[ ",
-" <_-4'>&&>'>>>>>>>>>>>>'>>>>>'>>>>'>>>>>>>>>'>>>>>>>>>>>>'=[+}}:}}}}:}44)[/////2441}}:}}}}+[+>>>'>>>>>>'>>'>>>>>>>>>>>>>>'>>>>>'>>>>&@@@@@@@@@@@&>^++[+ ",
-" <_4#>>&>>>>>'>>>>>>'>>>>>>'>>>'>>>>>>>>>>>>>>>>>>>>>'>>>>=+[}}}}}}}}}+////[////[[3}}}}:}}^[+>>>>>>>'>>>>>>>'>>>>'>>>>>'>>>'>>>>>>>>@@@@@@@@@@@@@>#[+[[+ ",
-" <<,%#>&>>>'>>>'>>'>>>>>>'>>>>>>>>>>>'>>'>>>>>>>'>>'>>>>>>>;++}}:}:}}}}+..........[3:}}}}}})++>>>>'>>>>>'>>>>>>'>>>>>'>>>>>>>>>>'>>>&@@@@@@@@@@@@@>#[+[[[ ",
-" <_-^=>>>>>>>>>>>>>>>>>>>>>>>>>>>>>'>>>>>>'>>'>>>>>>>>>>>>>)[^}}}}}}:}:++[++[+++[+[3:}}:}}})[+#>>>>>>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@>#[++[[ ",
-" __%2=>>>>>>>>>>>>'>>'>>>'>>>'>>'>>>>'>>>>>>>>>>>>>>>>'>>>>(+)}}}:}}}}}44)[////[244*}}}}:}}4++#'>>>>>>>>>>>>>>>>'>>>>'>>>'>>'>>>>>>>@@@@@@@@@@@@@@@=+[++[[ ",
-" 3_-;+(>>>>>>>>>>'>>>>>>'>>>'>>>>>>>>>>>'>>>>>>>'>>'>>>>>>>>++)}:}}}:}}}+//////////+<}}}}}}}4++='>>>>'>>>>>>'>>>>>>>>>>>'>>>>>>>>'>>>@@@@@@@@@@@@@@>(++[+[[ ",
-" <,4;++#>>'>>>'>>>>'>>>>>>>>>>'>>>>>>>>>>>'>>'>>>>>>>>>'>>>{++4}}}}}}}}:+..........[3:}}}:}}<++=>'>>>>'>>'>>>'>>>>>>>>>>>>>>>>'>>>>>@@@@@@@@@@@@@@@{+++++[[+ ",
-" <_,%$++=>>>>'>>>>>>>>'>>>>>>>>>>'>>>>>'>>>>>>>>>>'>>>'>>>>>#++|}}:}}}:}}+[+++[++++++3}}:}}}}3++=>>>>>>>>>>>>>>>'>>>'>>>>>>>'>>>>>>>&@@@@@@@@@@@@@@@=+[+2_+/[ ",
-" <,4-})[[{>>>>>>>>>>>>>>>'>>>>>>>>>>'>>>>>>>>>>'>>>'>>>>>>>&#++<}}}:}}}}}44^[/////244$}}}}:}}$+[)>'>>>>'>>>>>>>>>'>>>'>>>>>>>>>>>>>&@@@@@@@@@@@@@@&&++++-}++[ ",
-" _,%*}3+[)>>>>>>'>>>>>>>>>>'>>>>>>'>>>>>>>>'>>>>>>>>>>>>>>>>=[+3}}}}}}}}}+//////////[3}}}}}}}}+[(>>>'>>>>'>>'>>>>>>>>>>'>>'>>>'>>>>@@@@@@@@@@@@@@@&)+[+21};+[[ ",
-" <_-4}}})+[#>>'>>>>'>>>>>>>>>'>>'>>>>>>>>'>>>>>>>>>>>>>'>>>>>;++1}}}}:}:}}+..........[3:}}}}:}}2++>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@@@&#++++_}}3+[[ ",
-" _,4_}}}*++[#>>>>>>>>'>>'>>>>>>>>>>>>>'>>>>>>>'>>'>>>'>>>'>>>;[+}}}:}}}}}:+++[++++++[+3}:}}}}}:)[+{>>>>>>>>'>>>'>>>'>>>>>'>>>'>>>>@@@@@@@@@@@@@@@&@+[+[%}}}}(+[ ",
-" <<-%:}}}}<+++{>>>>>>>>>>>>>>>'>>>>>'>>>>>>>'>>>>>>'>>>>>>>>>>++^}:}}}}:}}}:}4/.....)}:}}}}}:}}}4+[#>>'>>'>>>>>>>'>>>>>'>>>>>>>>>>@@@@@@@@@@@@@@&>#++++^1}}:}-[[[ ",
-" <_--}}}}}}-+[+#>>>>'>>>>>>'>>>>'>>>>>>>>>'>>>>>>>>>>>>>>>>>>&++%}}}}}}}}}}}}|++[+++)}}}:}}}}}:}-++=>>>>>>>>>>'>>>>>>>>>>>>>'>>>&@@@@@@@@@@@@@@@>{+++[^1}1$:}1[[[ ",
-" _,%3:}}:}}}4+++='>>>'>>'>>>>>>>>>>>'>>'>>>>'>>>>>>>>>>'>>>>>#++4:}}:}}}:}}}}}:}}}:}}}}}}}}:}}}}3++=>>'>>>>'>>>>>'>>>>>>>'>>>>&&@@@@@@@@@@@@@@>>=++[+^:}1331}};[+[ ",
-" <,-%}}}}}}}}:,+++)&>>>>>>>>>>>>>>'>>>>>>>>>>>>'>>>>'>>>>>'>>>=++_}}}}}:}}}:}}}}}}}}}:}}:}}}}}}}}$++)>>>>'>>>>>>>>>>'>>'>>>>>>&@@@@@@@@@@@@@@>>&;+[++;1}*3$33:},+[[ ",
-" <,--}:}}:}}}}}3+[++=>>>>'>>>>>'>>>>>'>>>>>>>>>>>'>>>'>>>>>>''=++$}}:}}}}}}}}}}:}}:}}}}}}:}}:}:}}}+[+>>>>>>>>>>>>>>>>>>>>>>>>@@@@@@@@@@@@@@&>>=+++++4}:333333:}1[[[ ",
-" ,,%1}}}}}}:}}}}:;+++(#&>>>>>'>>>>>>>>>'>>>>>'>>>>>>>>>'>>>>>>^++}:}}}:}}:}:}:}}}}}}:}}}}}}}}}}}:})++{>>>>>'>>'>>>>>>'>>>>&@@@@@@@@@@@@@@&&>#(++[+2<}1$33333$*}};[[[ ",
-" <,-%}}:}}}}}}}}}}},2[+[2#&'>>>>>'>>>>>>>>>'>>>>>>>>>>>>>>>>>>&++(}}}}}}}}}}}}}}}}:}}}}:}}:}}}:}}}}4+[#>>'>>>>>>'>>'>>>>>>@@@@@@@@@@@@@&>>&#(+++++|}}$33333333$}}_+[+ ",
-" _,4,}}}}:}:}}:}:}}}142[+[+={>>>>>>'>>>>>'>>>>>>'>>'>>>>>'>>>>{+[%}}:}}}:}}}}}}}:}}}:}}}}}}}:}}}}:},+[='>>>>>'>>>>>>>>>&@@@@@@@@@@@@&>>>{=([[[++%*}1$3333333333:}:+[[ ",
-" ,,%$}}}}}}}}}}}}:}}}}1-+++[[)={>>>>>>'>>>>>>'>>>>>>>>'>>>>>>&#++-}}}:}}}}}:}:}}}}}}}}}}}:}}}}:}}}}$++)>>>'>>>>>>>>>>@@@@@@@@@&@>>>>>{#)[[++++;*}:3333333333333*}}%[[[ ",
-" <_-%}}:}}}}}:}}}}}}}}}}}:_2++[++^={>>>>>>>>>>>>>>'>>>>>>>>'>>>=[+*:}}}}:}}}}}}}}}}:}}:}}}}}}}}}}:}}}2[+'>>>>>>>>>&@@@@@@@@>&>>&>>>{=;[[[+++2|:}:$3333333333<3333:}_[+[ ",
-" _,4,}}}:}:}}}}:}}}}}}}}}}}}$%+++++[+;#{>>>>>>>'>>>'>>>>'>>>>>&^[2}}}}}}}}}:}}:}:}}}}}}}}:}}:}}}}}}:})+[{>>>>>&&@&@@&@&>'>>>>>>@#;2++[++++;_}}:$3$33333<3333$333$:}:+[[ ",
-" ,,%*}}}}}}}}}}}}:}:}}:}:}:}}}}<%+++[[[[+)=#{>>>>>>>>>'>>>>>>>@++%}}:}}:}}}}}}}}}}:}}:}}}}}}}}:}}}}}}-+[=>>>&&&&>>>>>>>>>>&#=;+[[+[++++%,:}}*$333333333333333333$*}})[[[ ",
-" <,-%}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}*|)++++++[[+)==#@'>>>>>>>>>&~++_}}}:}}:}}:}}}:}}}}}}}}:}}:}}}}:}}}}$++^>>>&>&>>>>&&#==)++[+[++[+[^%3:}}}1333333333333333333333$3}},+[[ ",
-" _,4,}}}:}:}}}}}}:}}}:}}}}}}:}}}}:}}}}}$4;++++[++++++()==###&>>([+}}}}}}:}:}}}:}}}:}}:}}}}}}:}}:}}}:}:}([+{&!###==;^[+++++[+++++)|<:}}}}**3$333333333<333<333333333:}*[[[ ",
-" ,-%3}}}}}}}}}:}}}:}}}}:}:}}}}:}}}}}}}}:}}}1<|)^[+++[+[[+[+++[++++;4444_$$_$_3*}:}}}}}:}}:}}13_$3<3_|4|^++[++++[[[[[+[+[+[2)|,3}}}}}}:*33$3333333333333333333333333*}})[[ ",
-" _,-%}}:}}}}:}}}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}$34%)^[++[++++++++++++++++++[+++++[+++[+++[+++++++++++[+[++[++++++2))|_3:}}}}}}}:1$33$3333333333<333333333333333333}}-+[[ ",
-" ,,4-}}}}:}}}}}:}}}:}:}}}:}:}}:}}}}:}}}}}}:}}}}}}:}}}}}}:}33<44;)^^+[+[+[+[+[+++[+[+++[+++[+++[++[+[++[+++(^^%|433$}}}}}}:}:}}}:1$$3$33$3333$<33333333333333333<33333:}$+[[ ",
-" _,%3}}}}}}}}:}}}:}}}}}:}}}}}}}}:}}}}}}}:}}}}}}}}}11:}}}}}:}}}}}}}}}}}}:333<33<,444444444|444|_33<33<1:}}}}}}}}}}}}:}}}}}}::13333333333333333333333333333<333333333331}}2[[ ",
-" --;::}}:}:}}}}}}}}}:}}}}}:}}:}}}}}:}:}}}}}:}}:}}}}}1$$$$*::}}:}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}:}:}}}:::3$$3333$33333333333333333333333333333333333333}}%+[[ ",
-" <,4-}}}}}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}1*$33<$$*$1*:::}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}}}:}:}:113*333333333333333333333333333333333333333<3333333333:}<[[[ ",
-" ,-4_}}}:}}:}:}}}}:}}}}:}}:}}:}}}:}}}}:}:}}:}}:}}}:}}:}}}}1$$3$33333333$$$3*1**1111:1}:}}}:}:}}}}:1:1:*11**$*333$333$333333333333333333333<3333333333<3333333333<333333:}}+[[ ",
-" ,-%:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}:*3333333333$333333$$$_333333$3$$<$33333333333$33333333333333333333333333<333333333<333<33333333333333333333}};[[ ",
-" ,,4%}}}:}}:}}}:}}:}}}}}:}}:}}}:}}}}}}:}}:}}:}}:}}}}:}}}}}}:}}}:*$333333$3333333$$$$33333$<3$$$<33333333333333333333333333333333333<333333333333333$33333333333333<333333}}-[[[ ",
-" ,,4,}:}}}}}}:}}}}}}:}}}}}}}}:}}}:}}}}}}}}}}}}}}}:}}}}}}}:}}}:}}}}1$33333<$33333_$$$33333333$333333333333333333333333333333333333333333333333333<3333333333333333333333331}*+[[ ",
-" ,-%3}}}}}:}}}}}}:}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}:}}}}}}}}}}:}}1*333$333333$$_333$<33$<3$<33333333333333333333<333333<333<33333333333<33333333333333<333333333333333*}}+[[ ",
-" --;}}}}:}}}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}:}*3333333333333333$$3$33$33333333<33<3333333333<$<333333333333333<3333<333333<333<$3333333333<333333:}%[[[ ",
-" ,,44}}}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}}:}}:}}:}:}}:}}}}:}}}:}}}}:}}}}:}}*33333333333333<3$<333<333333333333<3333333333$3333333<333333333333333333333333333<33333333333333}}_[[[ ",
-" ,-4_}:}}}}:}}:}}}:}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}::$33333333333$$3$3333333<3333333$33333333333333333333333333333333333<333333333333333333333333331}:+[[ ",
-" ,-%$}}}:}}}}}}:}}}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}:}}}}:}}}}}}}}}:}}}}}1*33333333333333333333333333333333333333$<3333333333<33333333333333333333333333<33333<3333333*}}2[[ ",
-" _,4;}}}}}}:}}}}}}}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}}}:}}}:}:}}}}:}}}}}}}}}:$333333333333333333333333333<3333<$33$33333333333333333333333333333333333333333333333333333}}%[[[ ",
-" ,-44}}}:}}}:}}}}:}}}}}:}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}:}}}}}}}}}}:}}}}}}:}:}:}}}:*3333333333333<3333333333333333$<33<333333<33333333<33333333333333333<3333333333333333333*},[[[ ",
-" ,-4_}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}:}}:}}:}}}}}}}:}}}}}}}:}}}}*333333<3333333333333333333333333$3333333333333<$333333<3333333<333333333<333333333333$1}1+[[ ",
-" --%*:}}:}}}}}}}:}}}}}:}:}}}}:}:}}:}}}}}}}:}}:}:}}:}}}}}:}}}}}}}}}}}:}:}}}}}}}:}}}}:}}}:*3<3333333333333<333333333333333$<3333333333333333333333333333333333333333333<33333333}}2[[ ",
-" ,4%}}}}}}:}:}}}}}:}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}:}}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}*33333333333<$3333333<3333333333333333<333333333333333333333333333333333333333333333:}%[[ ",
-" _-4|}}}:}}}}}}}:}}}:}}}}}}}}}}:}}:}}}:}}}}:}}}:}}:}}}}}:}}}}}}}}}:}}}:}:}}}}}:}}:}}}:}}:}}}:*3<33333333333<33333333<333333$<333333333333333333<33<3333333333333<333333<3333333:}_+[[ ",
-" ,|4_}}}}}:}}}:}}}}}}}:}:}}:}}}}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}:}}}}}}:}}}}}:}}}}}}}}:}}}}}}:}}}}*333<3333333333333333333333333333333333333<3333333333333333333333333333333333333*}3[[[ ",
-" --%3}}:}}}:}}}}}:}}}}}}}}}}:}}:}}}:}}}:}}}}}}}}}:}}}}}:}}}}}}:}}}}}}}}:}}}}}:}}:}}}}}}:}}}}}}}}:*33333333333333333333333333<333333333~333333333333333<333<333333333333333333333}}+[[ ",
-" -4;}}}}}}}}}}}}}}}:}:}}}:}}}}}}}:}}}:}}}:}:}}}:}}}:}}}}}:}}}}}}:}:}}}}}}:}}}}}}}}:}}:}}}}}:}}}}}}}*333333333333333333333333333~33333333333~3333333<33333333333333<33333<3333333:}%[[ ",
-" ,-44}}:}:}}:}:}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}:}}:}}}}}}}:}:}}}}:}}:}}:$33<333<33333333333<3333333333<33333333333333333333333333333333333333333333:}|[[[ ",
-" --4,}}}}}}}}}}}}}}:}}}:}}}}:}}}}:}}:}}}:}}}}}}}}}:}}:}}}:}}}}:}:}}}}}}:}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}:*$333333333<3333333333333333333333333<3333333333333<333333333333333333333*}3[[[ ",
-" ,4%3}}}}:}}}:}}:}}}:}}}}:}}}}}}}}}}}:}}}:}}}:}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}}:}}}}:}}:}}:}}:}}}}}*3333<333333<33333333333333333<33333333333333<333333<3333333333333333333$}:+[[ ",
-" -4;:}}:}}}:}}}}}}}}}}:}}}}:}}:}:}}}}}}}}}}:}}}}}:}}}}:}}}:}}:}}}}}}:}:}}}:}}}}}}:}}}}}:}}}}}}}}}}}}}:}}}}}$$333333333333333333<33333333333333333333333333333333333<33333333<33333}}^[[ ",
-" ,-4%}}}}}}}}}:}}:}}}}}}}:}}}}}}}}:}}}:}}}:}}}}:}}}}:}}}:}}}}}}}:}}}}}}}:}}}}}}:}}}}}:}}}}:}}:}}:}:}}}:}}}}}}}*3333333333333333333<3333333333333<33333333333333333333333<3333333333:}%[[ ",
-" ,|4-}}}}}:}}}}}}}}:}:}}}}}:}}:}}}}}:}}}:}}}}}}}}:}}}}}}}}:}}}}}}}:}:}}}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}}}:$$333333333<33333333333333333333333333333333333<3333333333333333333*}-[[[ ",
-" --4_}}:}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}:}}:}}}}:}}:}}}}}}}}:}:}}}}}}}}}:}}}:}}}:}}:}}:}}}:}}}}:}}}}}*33333333333333333333333333333333333333333333333333333333333333333*}*+/[ ",
-" -4%3}}}}:}}:}}}}}:}}}:}}}:}}:}}:}}}}:}}}:}}}}}}:}}}}}}}}:}}}}}}}:}}}:}}}}}}:}}:}}:}}}}}}}}}}}}}}}}}:}}}}:}}}}:}}}}$$33<333333<333333333<333<33333<3333333<3333333333333<33333333333:}+[[ ",
-" -4%}}:}}}}}}}}:}}}:}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}}:}}:}}}}:}}:}}}:}}}}}}:}}}}}}}}}}:}}}:}:}}}:}:}}}}}}}}}:}}}}}}}}}1$333333333333333<3333333333333333<3333333333<3333333333<3333333:}^[[ ",
-" -|44}}}}:}}:}}}}}}}}}}}}:}}:}}:}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}:}}}}}:}}}}}}}}:}}}}}}}:}}:}}}}::$33333333333333333333333~33333333333333<333333333333333333333*}4[[ ",
-" ,44|}}}}}}}}:}}:}}}:}:}}}}}}}}}}}:}:}}:}:}}}}}}}}}:}}:}}:}}:}}:}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}:}}}:}}:}}}}}}}}:}}}}:$~3333333<333333$<3333333~3333333333333333333333333333333333*}_[[[ ",
-" -4%_}:}}}:}}}}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}:}}:}}}:}}:}}}:}:}}}:}}}:}}}}}}}}}}}}}:}}:}}:}}}}}}}:$33333333333333333<3333333<3333333333333<333333333<33333333}3[[[ ",
-" --;$}}:}}}}}}}:}}}}}:}}}}}}}}}:}}}}}}:}}:}:}}}}}}}}}:}}:}}:}}:}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}:}}:}}}}}}}}}}}}}:}}}}}*333333333<333333333333333333333333333333<3333333333<33333:}[[[ ",
-" |4;}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}:}}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}}:}}}}}}:}}}}:}}}:}:}}:}:}}}:}:}}}}}}}}:}}}:}}}:}}}}:}}}:}$3333333333333333333333333~33<333333333333333333333333331}^[[ ",
-" ,-44}}}::}}}}}:}}:}:}}}}}}}}:}}}}}}}}}:}}}:}}}:}:}}}}}}:}}:}}:}}}}}}}}:}}:}}}}:}}}:}}}}}}}}}}}}}}}:}}:}}:}}}:}}}:}}}:}}}:}}}}}}$3~333333333333333333333333333<333333333<33333333333333::;[[ ",
-" -4%-}}:}}}:}}}}}}}}}}:}}:}}}}}:}:}}}:}}}:}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}:}}:*333333~33333<33<333333333333333333333333333<33333333$}-[[[ ",
-" --%,}}1:}}}}}:}}:}}}}}}}}:}}}}}}}:}}}}}}}}}:}}}}:}:}}}}}}:}}:}}}}}}:}}}}:}}}}}:}}:}}}}}:}:}}:}}}}}}:}}:}}:}}}:}}:}}:}}:}}}}}}}}}}}$33333333333333333<3333333333333<333333<33$333333333$}<+/[ ",
-" |4%3}:1}}:}}}}}}}}:}:}}}}}}:}:}}}}}}}}:}}}}}}:}}}}}}:}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}:$333333333333333333<33333333333333333333333333<3333}1+[[ ",
-" -4%1}}*}}}}}:}}:}}}}}:}}}}}}}}}}}:}:}}}:}}:}}}}}}:}}}}}}}}}:}}}}:}}}}}}:}:}}}}}}:}}}:}}}}:}}:}}}}}}}}}}:}}}}}:}}}:}}:}}}}}:}}}}}}:}}}*<33333333333333333333333333333333333333<33333333$1:+/[ ",
-" |4;}}11}:}}}}}}}}:}}}}}:}:}}}}:}}}}}}}}}}}}}:}}:}}}:}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}}:}}}:}}:}}}}}:}}}}:}}}}}:}}}}}}:}:}}}}}}:$333333333333333333<33<3333333<$33333333333333331}^[[ ",
-" -444}}11}}}}:}}:}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}}}}}}:}:}}}}}:}}:}}}}:}}}}:}:}}}}:}:}}}}:}}}:}}}:}}}}}}}:}}}}:}}}}}:}}}}}:}:}}}}}}}}:}}}}$333333333333333333333333333333<333333333333333$}%/[ ",
-" ,44-}}$:}}:}}}}}}:}}:}}:}}}}}}:}}:}}}}:}:}}}:}}}}}:}}}}}}:}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}:}}}}}}}:}}}:}}}}:}}}133333<33333333333333333333333333333333<3333333}-[[[ ",
-" |4%_}}3}}}}}}}:}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}:}:}}}}}}:}}}}}:}}:}}}}:}}}}:}}}:}}}}}:}:}}}}}}}:}}:}}}:}}:}}:}}}}}}:}}}}}:}}}}}}}}}}:}}}}:}}}:$333333333333333333<333<333333333333333333333}<[[[ ",
-" -4%$}:3}:}}}:}}}:}}:}}}}}}}}}:}}:}}:}:}}}:}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}:}}}}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}}:}:}}}}:}}}}:}}}$$3333<33333~33333333333333<3333333333<33333::[[[ ",
-" 44;1}:3}}:}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}:}}}}}:}:}}:}}}:}}:}}}:}}:}:}}:}}}}}}}}:}}}}}:}}}:}}:}}}:}}:}}:}}}:}}:}}}}}}}}}}:}}}}}:}}}}}}}}}}}}}:3333333333333333333333333333<33333333333331}+/[ ",
-" 44;}}**}}}}}}}:}}:}}}}}:}}}}:}}:}}:}}}:}}}}}:}:}}}}}}}}}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}:}:}}}}}:}}}}}}:}}:}}:}}:}}:*33~33333333~3333333333333333333333333333*}^[[ ",
-" ,444}}31}}:}:}}}}}}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}:}}}}:}}}:}}:}}}}}}}:}}:}}}}}}:}}}:}}}}:}}:}}:}}:}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}$3333333<33333333333333333333<3333333333*})[/ ",
-" -444}}31}}}}}}:}}:}}}}}:}}}}:}}:}}}}}}:}}:}:}}}}:}}}}}}}:}:}}}}}}}}:}}}}}}:}}:}}}}}}}}:}:}}}:}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}:}}:}}}}:}}}:}}:}}}}}}}}:33<333333333~33333333<33333333333333333}4[[ ",
-" |4%,}:31}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}}}:}}}}}}}:}}:}}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}}}:}:}}:}}}}}}:}}}}:}}}}}}:}:}:}}}:}$333333<33333<33333333333333333<333333}_[[[ ",
-" |4%<}13:}:}}}:}}:}}}}}:}}:}}}:}}}}:}:}}:}}}}}}}:}}:}}}}:}}}:}}}}}}}}}:}}}:}}:}}}}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}:}}}}}:}}}}}}}}}}}}}}$33333333333333<$3333333333<333333333:<[[[ ",
-" 44%3}$3}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}}:}}:}:}}}}}}}}}}}:}}}}}}}:}}}:}}}:}}:}}:}}:}}:}}:}}}}}}}:}}:}}}}:}}}}}}}}}}}}}}}}}:}}:}}}}*333333333333333333333333333333<3333:1[/[ ",
-" 44):}33:}}}:}}:}}:}}}:}}}}}}}}}:}}}:}}}}}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}}:}}:}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}:}}}:}}:}}:}}:}:}:}}}}}}}:}}}133333<33333333333<3333333333333333*}[[[ ",
-" 44;}}33}}}}}}}}}}}}}}}}:}}:}:}}}:}}}}:}}:}}:}}}}:}}:}}}}}}}}}}}:}}:}:}}}}}}}}:}}}}}}}}}}:}}}}}:}}:}}:}}:}}:}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:333333333333333333333333333333333*}^[/ ",
-" 4%4}:3$}}:}}:}}:}}}:}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}:}}:}}:}:}}}}}}}}}:}}:}}}}}}:}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}}:}:}}:}}:}}}}:}}:}}}}}:}}:}}}$333333~33<333333<3333333333<333$}^[[ ",
-" |444}:3$}}}:}}}}}:}}}}}:}}:}}:}}:}}}}:}}:}}:}}}}}:}}}}}}}}}}}}}}:}}}:}}}}}}}:}:}}}}}:}}:}}:}}}}:}}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}$3333333333333333333<3333333333$}4[[ ",
-" |4%,}13*}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}:}}}}:}}}:}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}:}}}}}}}:}}:}}}}:}}}:}}}:}}}:}}}}}}:}}:}}}}}:}}}:}}}}}*333333333333333333333333333333}4[[ ",
-" |4%,}$3$:}}}}}}}}}}}}}:}}:}}:}}:}:}}:}}:}}:}:}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}:}}}}:}}}}}}:}}:}}:}}}}}}:}}}}}:}}:}}}}}}:}}}}}}}}:}}}}}}}:}}:}}}}}}}:}}}}:}}}}}:}}}*33333333333<3333$<33333333333}</[[ ",
-" 44;$}331}}:}:}}:}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}:}}}}}}}}:}}}:}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}}}}:}}}}}}}}:}}}}}}}:}}}}}}:}}:}}}}}}}:}}}}}}}:}}}}:}}}}}:}}:3333<33333333333333333333333:_[[[ ",
-" 44;$}331}}}}}}}}}}}}}}:}}:}}:}}}:}}:}}:}}:}}:}:}}}}}}}}}:}}:}:}}}:}}}}}:}}:}}}:}}}}}:}}:}}}}:}}}}:}}:}}}}:}}:}}}}}:}}:}}}}:}:}}}}}}}}}}:}}}}:}}:}}}}}}}}}}:}}}}}::3333333333333333<3333333333::[[[ ",
-" 4%;}:331}}}}}:}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}:}}}:}}}}:}}}}}}}}}}}}}}}}}:}}}}}}}:}}}}}}:}}}:}}}}}}:}}}}}}:}}:}}:}}}}:}}}}}:$33<3333333333333333<333331:[[[ ",
-" 44)}:33*:}:}}}}:}}}}}}}}:}}:}}}}:}}:}}:}}:}}}:}}}}}}:}}}}}:}}}:}}}}}:}}:}}:}}}}}}:}}}}}}}}:}}}}}}:}}:}}:}}:}}:}}}}}}:}}}}}}}:}}}:}}}:}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}}$333333<333333333333333331:2[/ ",
-" 4%4}1331}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}:}}}:}}}:}}}}}}}}}}:}:}}}}}}:}:}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}}}}}}:}}}}:}}:}}:}}:}}:}}}}}:}}}33333333333333<333333333*}([[ ",
-" |4%4}*331}:}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}:}}}}}}}}:}}}}}}}:}}}}}}}:}}}:}}:}}:}}:}}}}}}}}:}}}}}:}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}$3333333333333333<33333$}^[[ ",
-" |4%-}*331}}}:}}:}:}}:}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}:}}}}:}}}:}:}}:}:}}}}}}}}}:}}}}}}:}}}}}}:}}}}}}:}}}}}}}}}}}}:}:}}}}}}}:}}}}:}}}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}}:}$3333<$<33333<333333333}%[[ ",
-" |%%,}*331}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}:}:}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}:}:}:}}}}}:}}}:}}:}}}:}}}}}}}:}}:}}:}}}}}}}}:}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}$333$3333333$333333333}4[/ ",
-" |%%,}$33*}:}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}:}}:}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}:}:}}}}}}:}}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}}:}}}}}}}$$$333333<$3333<33333},[/[ ",
-" 44;$:3331}}}}}}:}}}}}}}:}}:}}:}:}}:}}:}}}:}}}}}}}}:}:}}:}}:}:}:}}}}:}:}:}}}}}}}}}:}}:}}:}}}}:}}}}:}}:}}:}}:}}}}}:}:}:}}}}}}}}:}}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}:}:}:}}}$3333333333333333333}<[[[ ",
-" 4;;$}3331}}:}}}}}:}}}}}}}}}}}}}}}}}:}}}:}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}:}}:}}}}}}}:}}:}}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}:}}}}:}}}}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}}}}}}}:}}$$33333333333333333:<[[[ ",
-" 44)*1333*}}}}}:}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}:}:}}}}:}}}}}}}}}:}}}:}}}}}}}:}}}}}}:}}:}}:}}}}:}}}:}}}}:}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}*<3333<33333333333:1[/[ ",
-" 4%;}:333*}:}}}}}:}}}}:}:}}}}}}}}}:}}:}}}}:}}:}}:}}:}}}}}}:}:}}}}}}:}}}:}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}}}}}:}}}}:}}}:}}}}}:}}}}}:}}:}}}}:}}:}}:}}:}}:}}:}}:}}}}}:}}:}:}}}}}}:}}$33333333333<3333::+[/ ",
-" %%)}:3331}}}}:}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}:}}}}}:}:}}:}}:}}}}}}}}}}}}}}:}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}$$33333333333333:}[[[ ",
-" 4%;}1333*}}:}}}:}}:}}}}}:}}}}}}}:}}:}}}}:}}:}}:}}:}}:}}}:}}}:}}}}:}}:}}}}}:}:}:}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}:}}:}}}:}}:}}:}}:}}:}}}}:}}:}}}}}}}}:}}}}}*$$<$<3<3333333:}+[[ ",
-" %%4}*3331}}}}}}}}}}:}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}}}:}:}}}}:}}}}:}}:}}:}}}}}}:}}}}}}}}:}:}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}:}}:}}}$$$3$$$33333331}^[/ ",
-" %%4}1333*}}}:}}}:}}}}}}:}}:}}}}:}}:}}:}:}}:}}:}}:}}}}:}}}}}:}}:}}}}}}:}:}}}}}}:}:}:}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}:}}}:}}}}}:}}:}}:}}}}:}}}}}}:}}:}}:}}:}}:}}:}}}}:}}}}}}}}}}}}}}:}$333333<33333*:^[[ ",
-" |4%4}*3333:}}}:}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}:}}}}}}:}:}}}}}}}:}}}}}}}}}}:}}}:}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}:}}:}}:}}:}}}:}:3333333333331}^[/ ",
-" 4%%-}$333*}}}}}}}}}}}}}:}}}}}}}:}}:}}:}}}:}}:}}:}}}}}:}}:}:}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}}:}:}:}:}:}}:}:}}:}}}:}}:}}}}}}}}}}:}}:}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}}}3333<$33333*}4[[ ",
-" |%%,}$333*:}}:}:}:}}:}}}}:}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}:}}:}:}:}}:}}}:}:}}:}}}:}}}}:}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}:}}:}}}}}}}}}}}}}}}}}:}:}}}}}}}}:}:}}:}}}}}:}:333$<3333$*:4[/ ",
-" 4%;,}$333$}}}}}}}}}}}}:}}}}}}}:}}:}}}}}}:}}:}}:}}}}}:}}:}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}}}}}}}}:}}:}}:}}:}}:}}}}}}}}}:}:}}}}}}}}}:}:}}}::$$33333331}4[/ ",
-" |%%,}$3333:}}}}}:}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}:}}}}}}:}}}}:}}}:}}}}}}:}}}}}}:}}}:}}:}}}}}}}}}}}}:}}:}}}}}:}}:}:}:}}}}}}}}}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}:333333331:4[[ ",
-" 4;;<}$3333}}:}:}}}}}}:}}:}}}}:}}}}}}:}:}}:}}:}}:}}}:}}}}}}}}}}}:}}}:}:}}}}:}}:}}}}}}}}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}:}}:}}:}}}}:}}}}}}}}}}:}}:}}:}}:}}:}}:}}}:}:}:}}}}}}:}}}}:}}:}}}}}}*$333333:}-[/ ",
-" 4%;$}$3333:}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}}}}}}}}}:}}:}}:}}}}}}}}}:}}:}}:}}}}}:}}:}}}:}}}}}}}}}}:}}}:}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}:}}}}*$<3333*}_[[[ ",
-" %%)3}33333:}}}}}:}}}:}}}}}}}}}}}:}:}}:}}:}}:}}}}:}}}}}}:}}}}}}:}}:}}}:}:}}}:}}}}}}}}}}}:}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}:}}:}}}}}}}}}:}}}}}}:}}:}}:}}:}}:}}}}}}:}}}}}}}}:}}:}}:}}:}}:}}:}}}}133333:}<[[[ ",
-" 4;;$:333331:}:}}}}}}}:}:}}:}}}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}:}}}}}}:}}}}}:}}}:}}:}}}:}}}}}}}}:}}}:}}:}}}}}}:}}}:}:}}}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}}}}}$33331}<[/[ ",
-" 4;)$}3$333*}}}}}}}:}}}}}}}}}:}:}}:}}:}}:}}:}}}}}}}}}}}:}}:}}}:}}}}}}}:}}}}}}}}}}}:}}}}}:}}}:}}}}}}}}}:}:}}}}:}}}}}}}}:}}}:}}:}}}}:}}}}}}:}}:}}:}}:}}:}}:}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}:}}}}}*333:}_[[[ ",
-" %%;$:333$3$}}:}:}}}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}:}}:}}}}}}:}}:}:}}}}:}}}:}}}}:}:}}:}}}}}}}}}}}}}}}}:}}}:}}}}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}:}:}}:}}}:}}}}}}}}}:}}}}}:}}}}:}}}}:$*}}<[[/ ",
-" %%^}:$3333*}}}}}}}}}}}}}}}}:}}}:}}:}}:}}:}}:}}}}:}}}}:}}}}}:}}}}}}}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}:}:}:}}:}:}}}}}}}}}:}}}}}:}}}}}}}:}}:}}:}}:}}}:}}}:}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}:}}:}}}}3[[[ ",
-" 4%)}:$<3333}:}}}:}:}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}:}}}:}}}}}}}}}}}}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}}:}:}}:}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}:}}}}}}:}:}}}}}}}:}}}}}:}}}}:}}}:}:}}}}}}}}}}:[/[ ",
-" %;^}}333333}}}:}}}}}}}}}}}}}}}:}}:}}:}}:}}:}}:}}}}}}}}}}}}}}}:}:}:}}}}:}:}}}}:}}}}}}}}}}}:}}:}:}}}}}}}}}}}:}}}}:}}}}}}}}:}}:}:}}:}}}}}}:}}:}}}}:}}}}}}}:}}:}}}}}:}}:}}}}}:}}}}}}}}}:}}}}}:}:}}:}}}:+[[ ",
-" %%)}}3333331}}}}}}:}}:}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}:}}}}:}}}}:}}:}}}:}}}}}}}}}}}:}}:}:}}}}:}}}}}}}}:}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}:}:}}}}}}}}}}}}}}}}:}}:[[/ ",
-" %%)}}$$33331}}}:}}}}}}}:}}}:}:}}:}}:}}:}}:}}:}}}}:}}}:}:}}}:}}}}}:}}}}}}}}}:}}}}}}}:}}}}:}}:}}}:}}}}}}}}:}}}}:}}:}}}}}:}}:}}}:}}}}}}}}:}}}:}}}}}:}}}}}}}:}}:}:}:}}}}}:}}}:}}}}}}:}}:}:}}}}}:}}}}}}:[[[ ",
-" ;%^}:333333*:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}:}}}}}}}:}}}}}}}}:}}}}:}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}:}}}}}}:}}}}:}}:}}}}:}}}}}:}}}}}:}:}}}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}:}:}}}}}}:}}:[[/ ",
-" %;^}}$33333*}}:}}:}}}}:}}:}}}}:}:}:}}:}}:}}}}}}}:}}:}}}}}}}}}}}}:}:}}}}}:}:}}}:}}}}}}}}:}}}:}:}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}:}}}}}}}}}}}}}:}}}}}}:}:}}}}}}}}:}}:}}}}}:[[[ ",
-" %;)}}*333$33}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}:}:}}}}}}:}}:}}}}}}}}}:}}:}}}}:}}}}}}}}}}}}:}:}}:}}:}}:}}:}}}}}}}}:}}}:}}}}}}}}}}}}:}}}}}:}}}}}}:}:}}:}}:}}}}}}}:}:}}}}}:}}}}}}}}}}}}:}}:[[/ ",
-" %;)}}$33<$33:}}:}}}}}:}}:}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}:}}}}}}:}}}}}}}}}:}}:}}}}}}}}}}:}}}}:}}}:}}}:}}}}}}}}}}}:}}}}}:}}:}:}}}:}}}:}}:}:}}:}}}}}:}}}}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}:}:}}}:}}}:}}}}:[[[ ",
-" ;;^}:3$3$33$*}}}:}}}}}}}}}}}:}:}:}}}}}}}}:}}:}}}}:}}:}}}:}}}}}}}:}}}:}}}}}}}}}:}}:}}}}}:}}}}}}}}}}}}}}}}}:}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}:}:}:}}}}}:}}}}}}}}}}}}}}:}}:}}}}}}}}}}:}}}}}}}:[[/ ",
-" ;%^}}133333$*}}}}}:}:}}:}}:}}}}}}}:}}:}}}}}}}}:}}}}}}}}}}:}:}}}}}}:}}}:}}:}}}:}}}}}:}}}}}:}}:}}:}}:}}:}:}}}}}:}}}}}}}:}}:}}:}}:}}:}}}}:}}}:}}}}:}}}}}}}}}:}}}}}:}}:}}:}}}:}}}}}}:}}}}}:}}}}}}}}:}}:[[[ ",
-" ;;)}}*3333333}}}}}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}:}}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}:}}}}}:}}}:}}:}:}}}}}:[[/ ",
-" %)^}}13333333:}:}:}}}:}}:}}}:}}}}:}}:}}}}}}}}:}}:}}}}}}}}}}}:}}}:}}:}}:}}:}}}:}}}}}}}}:}}}}}:}}}:}}:}}}}:}}:}}}}}}}}:}}:}}:}}}:}}}}}}}}}}:}}:}}:}}}:}:}}}:}}}}:}}}:}}}}}}:}}}}}}:}}}}}}}:}}}}}:}}}:+[/ ",
-" ;;^}:1333333$:}}}}:}}}}}}:}}}}}}}}}}}}}:}}:}}}}}}}:}}:}:}:}}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}:}}}}}}}:}}:}}}}}}}}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}:}}}}}}}}:}}}:}}:}}}:}}:}}}}}}:}}}}}}:}}}:}}*[/[ ",
-" ;)^1}:3333333*}}}}}}:}}}}}}:}}:}:}}:}}}}}}}}:}}}}}}}}}}}}}}}:}}}:}}:}:}:}}}}}}:}}}}:}}}}:}}}}}}:}}}:}}}:}}}:}}}}}}:}}:}}:}}}}}:}}}}}}}}}:}}:}}}}}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}}:}:}}}}:}}}}}}}}}}}<+/[ ",
-" ;;^3}:<3333333:}}}}}}}:}}}}}}}}}}}}}}}:}}:}}}}:}}:}}:}}}}}:}}}:}}}}}}}}}}}:}}}}}:}}}}}}}}}:}}}}}:}}}}}}}:}}}}}}:}}}}}}}}}}}:}}}}}:}}}:}}}}}}}:}}}:}:}}}:}}}:}}}}:}}}:}}:}}}}:}}}}}}}:}}}:}}:}}}:}}_[[/ ",
-" ;))$}}33<3333$}:}:}}}}}}:}:}}:}}}:}}:}}}}}}:}}}}}}}}}}:}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}:}}}}}:}}}}}}}:}}}}}:}}:}}}}:}}}:}}:}}}}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}:}}}}<[[/ ",
-" );^$:}333333$$1}}}:}}:}}}}}}}}:}}}}}}}}}:}}}}}}}:}}:}}}}:}}}:}}}}}}:}}}}:}}}}}}:}}}}}}}}:}}}}:}}}:}}}:}}}}}}}}:}}}}:}}}}}}}}:}}:}}}}}:}}}:}}:}:}}:}}}}}}}:}}:}:}}}}}}:}}}}:}}:}:}:}}:}}:}}:}}}}:}}-[/[ ",
-" ;)^,}}333333333}}}}}}}}:}}}:}}}}:}}}}:}}}}:}}:}}}}}}}}}}}}:}}}:}}:}}}:}}}}}}:}}}}:}}:}}}}}:}}}}}}}}}}}}}:}}:}}}}}:}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:4[/ ",
-" %^^-:}$3333333$:}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}:}}:}:}:}}}}}}}}}}}}}}}}}}:}}}:}}}}}}}:}:}}}}}:}}:}:}}:}}}}}}}}}}}}}}:}:}}}}}}:}}}}:}}}:}}:}}:}}}}}:}}}}:}}}:}}}}}}:}}:}}}}}:}}}}}:}}:}}:}}}:}}}:}}4[[ ",
-" ;)^4}}*333333331}}}}}}}}}}}}}:}}}}}}:}}:}:}}}}}}}}}}}}}}:}}:}}:}}}:}}:}}}}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}:}}:}}:}}}:}}}}}}:}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}}}}}:}}}}}}}:}}}:}}}:}}}:(// ",
-" ;^^%}}*33333$<3*}:}}:}}}:}:}}}:}}:}}}}}}}}:}:}}:}}:}}}}}}}}}}}}}:}}}}}}:}}}}}}:}}}:}}}}:}}}}}:}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}}:}:}}:}}:}}:}:}}}}}}}:}}}:}}:}:}:}:}}}}}:}}}}}}}}}}}}}}}:^[[ ",
-" ^^^}}:3333<3333}}}}}}:}}}}}}}}}}}}:}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}:}}}}}}:}}}}}}}}}}:}}}}:}}}}}}:}}}:}}}:}:}}:}}:}}:}:}}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}:}}}:}}}:}}}}:}:+// ",
-" ^^^}}:3333$333$1}}:}}}}}}:}}:}}:}}}}}}}}}}}:}}}:}}}}:}}}}}}}}:}}}}:}}:}}}}:}}:}}:}}}}}}}}}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}:}}}}}:}:}}:}}}}}}}}}}}:}}:}:}}}}}}}}}}}}}}:}}}:}}}}:}}}}*[[[ ",
-" )^2*}:33333$3333}}}}}}}:}}}}}}}}}:}}:}}}:}}}}:}}:}}}}}:}}:}:}}}:}}}}}}}}:}}}}}}}}}}:}:}}}:}}}}}:}}}}}}:}}:}}:}}:}}}:}}:}}}}}}}}:}}:}}}}}}:}}}}}}}}}}:}}}:}}}:}}}}}}}:}:}:}}:}:}:}}}}}}}}:}}}}}}}_[// ",
-" )^^<}}$333333333:}:}:}}}}}}:}}:}}}}}}:}}}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}:}}:}}:}}}}}:}}}}}}}}}:}:}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}}}:}}}}}}}:}}}:}}}}:}}}:}}}}}}:}}}}}}}}}:}}}}}}}}:}}:}}}}}}:}:}-[/[ ",
-" )2^-}}$333333333*}}}}}}}}:}}}}}}:}}}}}}:}}:}:}}}}}}:}}:}}}}}:}}:}}}}}:}}}}}}}}}}}}}}:}}}:}:}:}}}}}}}:}}:}}:}}:}}}}}:}}:}}}}}}}}:}}}}}:}}:}}}}:}}}:}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}:}}}}:%[/ ",
-" ;2^%:}*333333333$:}}:}:}}}}}}:}}}}:}}}}}}}}}}}}:}}}}}}}}}:}}}}}}}}:}}}}:}}:}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}}:}}}:}}}}:}}}}}}}}}:}:}}}}:}}:}}}}:}:}}}:}}:}:}}:}}:}}}}}}}}}}:^// ",
-" )22^}}:33333333331}}}}}}}}}:}}}}}}}}:}:}}:}}}:}}}}}:}}:}}}}:}:}}:}}}}:}}}}}}}}}}}}:}}}}}}:}}:}:}}}}}:}:}}:}}}:}}}}:}}:}}}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}:}}1[[/ ",
-" ^22:}}3333333333$}:}}:}:}}}}}:}}:}}}}}}}}:}}}}}:}:}}}}:}}}}}}}}}}}}}}}}:}}:}}:}}}}:}}:}}}}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}}:}}}}}}}}}:}:}}}}:}}:}}}}}}}}}}:}}:}}}}:}}}:}}:}}}:}:}}}}}3[// ",
-" ^223}}33333333333:}}}}}}}}}:}}}}}}:}}}:}}}}}}}}}}}}}}}}}:}}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}}:}}}}:}}}}}:}}}}}}:}}:}}:}}:}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}:}}}}}}:}:}}}:}}}}}}}:}}}:}}}}}}}}}}}}}:}}:,[[/ ",
-" (22-}:*3<33333333*:}}}:}:}}}}}}:}}}:}}}}}}:}:}}}}}}:}}}}}:}}}}:}}}:}}}}:}}}:}}}}}}}:}}:}}}:}}}}}}:}}}:}}:}}}}}:}}}}}}}}:}}:}}:}:}}}}}}}}}}}:}:}}:}}}}}:}}}}}}}:}}}}:}:}}}}}}}}}:}}}:}}}:}}}}}})[/ ",
-" ^22;}}13333333333$:}:}}}}}}}:}}}}}}}}}}:}}}}}}:}:}}}:}}}}}}:}}}}}}}}}}}}}:}}}:}}:}}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}}:}}:}}}}}}}}}}}}}}:}}:}:}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}}}}:}}:}}}:}}}}}}}:}}::2// ",
-" 222}}}333<3333333$}}}}:}:}}}}}:}}}}:}}}}}:}}}}}}}}}}}}:}}}}}}:}}}:}}:}}}}}}}}}}}}:}}}:}:}}}}}}}}}:}}:}}:}}}}}:}}}}}}}}}}:}}:}}}:}}}}}}}}}}}}}}}:}}}:}}}}}}}}}}}:}}}}}:}:}}}}}}}}}}:}}:}}}}}}3[[/ ",
-" 22+$}:333$<3333333:}}}}}}}}}:}}}:}}}}:}}}}:}}}}:}}:}:}}}:}}}}}}:}}}}}}}:}}:}}:}}}}}:}}}}}}}}:}}}}}}}}}}}}}:}}}}:}}:}}:}}}}}}}:}}}:}:}}}}:}:}:}}}}:}}}}}:}}:}:}}}:}:}}}}}}:}}}:}}}}}}}}}:}}}}-//[ ",
-" 222-}}*333$3333333$:}}}:}:}}}}}}}}:}}}}:}}}}:}}}:}}}}}}}}}}:}}}}}:}}:}}}}}}}}}}:}}}}}}}:}:}}}}:}}:}}:}}:}}}}}}}}}}}}}}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}:}}:}}:}}}:}}:;[/ ",
-" (+2;}}:333<$33333331}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}:}:}}}}:}}}}}}}}}}:}}:}}}}}}:}}}:}}}}}:}}}}}}}}}}}}}:}}:}}:}}:}}}}}}}}}}:}:}}}}}}:}}}}}}:}}:}}}}}}:}}}:}:}}}}:}}:}}}}}}}}}}}}}}}}}}}}}12// ",
-" 2++:}:33$$<33333333}}}}}:}:}}}}}:}:}:}}:}:}}:}}}}:}}}}}}:}}}}}:}}:}}}}:}}}}}:}}}}:}}}}}}}}}:}}}:}}:}}:}}}}}}}}}}}}}:}}:}}:}}}}}:}}}}}}}:}:}}}}}}}:}}}}}:}}}}}}:}}}}}}}:}}:}}}:}}:}}:}}}:}}<[// ",
-" 22+<}}$3$33333333331}}:}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}}}:}}}}}:}}}}}}}}}}:}:}}}}}}:}}}}}}}}}:}}:}}:}}}:}}}}}}}}}}}}}}}:}}:}}}}}}}:}}:}}}:}}}}}}}}}}}:}}:}}}}}}}}:}}}}}}}}}:}}}}%[/[ ",
-" 2++%}}*3333333333333:}}}}:}}}:}}}}}}:}}}}}:}}}}:}}:}}}}:}}}}:}}:}}}}}}:}}}:}}}:}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}:}}}:}}}:}}:}}}:}}}}}}}}}}}:}}}}}}}}}}}:}}:}:}:}}}}}}}}}:}:}}}}}}:}}:}}}}}}:2[/ ",
-" (+22:}:33333333333333}}}}}}}}}}:}:}}}}:}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}}}}}:}}}:}:}}}:}}}:}}:}}}}:}}}}:}}:}}}}}}}}}:}}}}}}:}}}}:}}}:}}:}}}}:}}:}}}:}}}}}}}}}}}}:}}:}}}}}}}}}:}}}}}}}}:}}$[// ",
-" +++<}}33333<3333333$1:}}:}}}}}}}}}}:}}:}}:}:}}:}:}}}}}}:}:}}}:}}}}:}}:}}:}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}:}}}}}}}}:}}}}}}}:}}}}}}}}:}}}}}:}}}}}}}:}}}}}}:}}}}}}:}}:}:}}}}}}:}:}}}:}4[/[ ",
-" (+2%}}*3333$<33333333:}}}}:}:}}:}}}}}}}}}}}}}}}}}}}:}:}}}}}:}}}:}}}}}}}}}}}:}}}}}}}}}:}}:}}:}}:}}:}}}}:}}:}}:}}}:}}}:}}}}}:}}:}}}:}:}}}}}}}:}}}}}}}:}}}}:}:}}}}}:}}}}}}}}}}}}}:}}}}}}}}:2// ",
-" 2[+2:}:333333$<333333*}:}}}}}}}}}:}}}}:}}}}:}}}}:}}}}}}}}}}}}}}}}}:}}:}}:}}}}:}:}}}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}:}}}}}:}}}}}}}}}}}}:}}}:}}}:}}}:}}}}:}}}}}}}:}}}}}}}}:}}:}:}}}}}}:}}}}3[// ",
-" +++_}}333333$$33333331}}:}}}:}}}}}}:}}}:}}}:}}}}}}:}}}:}}}:}}}:}}}}}}}}}}}:}}}}}:}:}}}:}}:}:}}:}}}}}}:}}:}}:}}}}}}}:}}}}:}:}}}:}}}}}}}}}}}}}}:}}}}:}}}}}:}}}}}}}:}:}}}}}}}}}}}}:}}}:}};[/[ ",
-" 2++;}}*3333$<3$<333333:}}:}}}:}}:}}}}}}}}}}}}:}:}}}}}}:}}}:}}}:}}}:}}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}}}:}}:}}}:}}}}}}}}}}:}}:}}:}}}:}}}}}}}}}}}:}}}}:}}:}}}}}}:}}:}}:}:}}}}}}}}:+[/ ",
-" (+++*}:$333333$33333333}}}}}}}}}}}}}:}}:}}}}}}}}}:}:}}}}}}}}}}}}:}}}}}}}}}}:}:}}}}}}}:}}:}}}:}}:}}}}:}}:}}}:}}}}}}}}}}:}}}:}}}}}}}}}}}}:}}}}:}}:}}:}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}:}}},[// ",
-" +++|}}*<333333333333333}:}}}:}}:}:}}}}}}}:}}}:}}}}}}}}:}}}:}}}}}}}:}}}:}}}}}}:}}:}}}}}}}:}}}}}}}}}}}}}}:}}}}}:}}}:}}}}:}}}}:}}:}}}:}}}}:}}}}}}:}}}}}:}}}}:}}}}}}:}}:}}:}}}}:}:}}}}}:)[// ",
-" ([+2}}:$3<$3333<3333333*}}:}}}}}}}}:}}:}}}}:}}}}}}:}}}}}:}}}:}}:}}}}:}}}:}}}}}}}}}:}}}}}}}}:}}:}}:}}}:}}}}}:}}}:}}}}}}}}}:}}}}}}:}}}}}}}}}:}}}}}}:}}}}}}}}:}}}:}}}}}}}}}:}}}}}}:}}}3[/[ ",
-" +[+_}}$$$<33333333333331}}}}}}}}}}}}}}:}}}}}}:}}}}}:}}}}}}}}}}}}}}}}}}}}:}:}}}:}}}}}:}}:}}}}}}}}}:}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}:}}:}}}}}}}:}}}}:}}:}}}}}}}}}}}:}}:}}}}}}:}}}}}:%[// ",
-" 2++(}}*$$3333333333333331}:}:}:}}}:}}}}}:}}}}}}:}}}}}}:}}:}}:}}:}:}}}:}}}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}}}:}}:}:}}}}:}}}:}}}:}}:}}}:}}}:}}:}}}}}}}}}}:}}}:}}:}:}}}}}}:}}:}}}:}}}1[[/ ",
-" ++[+$}}3333333333<3333333:}}}}}:}}}}:}}}}}:}:}}}}}}:}}}}}}}}}}}}}}:}}}}}}}}:}}:}}}:}}:}}}}:}}}}}}}:}}:}}:}}}}}}}}:}}}}:}}}}}}}}}}:}}}}}}}}}}}}}:}}:}}}}:}}}}}}}}}}}:}}}}}}}}}}}}:-[// ",
-" 2[+%:}*3333333333333333331}}}}}}}}}}}:}}}}}}}:}}:}}}}:}}:}}:}}}}}}}}:}}:}}}}}}}:}}}:}}}}}}}:}}:}}}}}}}:}}}:}}}}}}}:}}}}}:}:}}}}}}}}}:}}:}}}:}}}}}}}:}}}}}:}}:}}}:}}}:}}}}:}:}}}1+[// ",
-" 2+[+*}}3333333333333333333*}}}}:}:}}}}}}}}:}}}}}}}:}}}}}}}}}:}}:}}}}}}}}:}}:}}}}}}}}}:}}:}}}}}}:}}:}}}}:}}}}:}}:}}}}}}}}}}}}}:}}}:}}}}}}}}}:}}}:}}}}}}:}}}}}}}}}}}}}}}:}}}}}:}:,[/[ ",
-" +[+%:}*3333<333333<33333331}}}}}}}:}}:}}}}}:}}}}}}}}:}}:}}}}}}}}:}}}:}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}:}}}}:}}}}}}}}:}:}:}}}:}}}}:}}}}:}}:}}}}}:}}}:}}}}}}}:}:}}:}}:}:}}}}}}}}}}:+[// ",
-" 2+++*}:33333333333333333333*}}:}}}}}}}}:}}}}}:}}:}}}}}}}:}}}}:}}}}}}}}:}:}}:}}}:}:}}:}}:}}}}:}}}:}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}}:}}}:}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}:}:}}}}}-[// ",
-" +[+;}}*333333333333333333331}}}:}:}}:}}}:}}}}}}}}}:}}}}}}:}}}}:}:}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}}:}}:}}}}}}}}}}}}}}:}:}}}}}}}}}}}}}}}:}}}}}:}}:}}}:}:}}}}:}}:}}}}:}}}}}:}::+[// ",
-" ([++*}:333<33333333333333333$}}}}}}}}}}}}}}:}}:}}}}:}:}}}}:}}}}}}}}}}}:}}:}}:}}}:}}:}}:}}:}}}}}:}}}}}}}:}}:}}:}:}:}}}}}}}}:}}:}}}:}}}}}:}}:}}}}}}}}}}}}:}}}}}}}:}}}}}:}}}}}-[// ",
-" +[+%}}*3333333333<33333333333}}}:}}}:}:}}}}}}}}}:}}}}}:}}}}}:}}}}}}:}}}}}}}}}:}}}}}}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}:}}}:}}}:}}}}}}}:}}:}}}}}}}}}:}}}}}}}}}}}}}:}}:+[// ",
-" ([+[3:}33333<333333333333333331}}:}}}}}:}}:}}:}}}}}}}}}}}:}}}}}:}}}}}}:}}}}}}}}}:}}:}}:}}}}:}}:}}}}:}}:}}:}}}}}}}:}}}}}:}}}}}}}}}}}}}}}:}}}}}}}}}:}:}:}}}}:}}:}}:}}:}}}}:4[// ",
-" +[+)}::333333333333<33333333331}}}}}}}}}}}}}}}}}:}}:}}}}}}}:}}}}}}}:}}}:}:}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}:}:}:}}}}:}}}}:}}:}}}:}}}:}}}}:}}:}}:}}}}}}}:}}}}}}}}}}}}}}}}*+//[ ",
-" ++[+,}}$3333<333333333333333333*::}:}}}:}}:}}:}}}}}}:}}:}}}}}:}}:}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}:}}:}}:}:}}}}}}}}:}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}:}}}}:}}:}}:}}:}:}}:%[/[ ",
-" +[+21}:$333333333333<3333333333$1}}}}}}}}}}}}}:}}}}}}}}}:}}}}}:}}}:}}}:}}}:}}:}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}:}:}}}:}}}}:}}}:}:}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}}}}<[// ",
-" +[[|}}*33333<333333333<333333333$:}:}}:}}:}}}}:}:}}:}}}}}:}}}}}}}:}}}}:}}}}}}:}}}:}}}}}:}}:}}}}:}}:}}:}}}:}:}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}:}}:}}:}}:}}:}}}}:}:([/[ ",
-" 2[[+3}}$333333333333333333333333331}}}}}}}}}:}}}}}}}}:}}:}}}}}:}}}}:}}}}:}}:}}}:}}}}:}}}}}}}:}}}}}}}}}}}}}}}}:}:}}}}}}}:}}:}}}}:}}}}:}}:}}}}}:}}}}}}}}}}}}}}}}:}}}}-[// ",
-" +[+(:}13333333333333333333333333333*:}}:}}}}}}}}}:}}}}}}}}:}}}}}}}}:}}}}}}}}}}}:}}}}}}}:}}}}}}:}:}}}}}:}}}}}}}}:}}}:}}}}}}}:}}}}:}}}}}}:}}:}}}:}}:}}:}}:}}:}}}}:}$+/// ",
-" 2[[+-}}*33333333333333333<3333333333*:}}}}:}}:}:}}}}}:}}:}}}}:}}:}}}}}:}}}}:}}}}}:}}:}}}}:}}:}}}}}:}:}}}:}:}}}}}}}}}}:}}}:}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:^[/[ ",
-" +[[+3}}$333<3333333333333333333333333$:}}}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}:}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}:}}}:}:}}}}:}}}}}:}:}}}}:}:}}}}:}}:}}:}}:}}:}}:}}}}}:,[// ",
-" +[+(}}}3333333333<33333333333333333333$1}:}}}}:}}}}}}}:}:}:}}}}:}}}}:}}}}:}}:}}:}}:}}:}}:}}:}}}:}}}:}}}}}}}:}}}}}}:}}}}}}}}}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}}}}*+[// ",
-" ([[[|:}133333<33333333333<33333333333333$1}:}}}}}:}:}}}}}}}}:}}}}}}}}}:}}}}}}}}}}}}}}}}}}}}}:}}}}}}}:}}:}}}}}}}}}}}}:}}:}:}}}:}:}}}}}:}}:}}:}}:}}:}}:}}:}:}::^[// ",
-" +[[[3:}*333333333<333333333333333333333333*:}}:}}}}}}}}}}:}}}}:}:}}}}}}:}}:}}:}}:}}:}}:}}}}}}:}}:}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}:}}}}}}}}}}}}}}}4[// ",
-" +[[(:}}$33333333333333333<33<3333333333$3$3$1:}}}:}:}:}}}}}}}}}}:}}:}}}}}}}}}}}}}}}}}}:}}:}}}}}}}}:}}:}:}}}}}:}}:}}}:}}}:}:}}}}}:}}}}}:}}}}}}}:}}:}}:}}}:3+//[ ",
-" ++[[)}:}333333333333<333333333333333333<$33333$*}}}}}}}}}:}:}}}}}}}}}:}}:}}:}}:}}:}}}}}}}}}}}}}}:}}}}}}}}}:}}}}}}}:}}}:}}}}}}}}}}}:}}}}:}}}:}}}}}}}}}}:}$2/// ",
-" ([[[|}:}<333333333333333333333<3333333333333$$33$*::}:}}}}}:}}:}}:}}}}}}}}}}}}}}}}:}}:}:}}:}:}}}}}:}}}:}}}}}}:}}}}}}}}}}}}:}:}}:}}}}}}}:}}}}}}}:}}:}}}:;//[ ",
-" +[+[<}}:333333333333333333333333333333333333333333$$*1}}}}}}}}}}}}:}}:}}:}}:}}}}}}}}}}}}}}}}}:}}}}}:}}}}}:}}}}:}}}:}}:}}}}}}}}}}:}:}}}}}:}}:}}}}}}}}}|[/// ",
-" +[[+3}}1333333333333333333333333333333333333333333333$$*::}:}}:}}}}}}}}}}}}}:}}:}}:}}:}:}}}}}}}:}}}}}:}}}:}}}}}}}}}}}:}:}}}:}}}}}}}}:}}}}}}}}:}}}:}_[/// ",
-" [+[(::}*3333333333333333333333333333333333333333333333$33$$**:}}:}}:}}:}}}}}}}}}}}}}}}}}:}}:}}}}}}}}}}}:}}}}:}}:}}}}}}}:}}}}}:}}:}}}}:}}:}}}}}:}}$+[// ",
-" ([[[(}}}*33333333333333333333<3333<3333333333333333333333$$$3333$$***:*:}:}}:}}:}}:}}:}}}}}}}}:}}:}}:}}}}:}}}}}}}:}}}}}}}}:}}}}}}}}}}}}}}}}:}}}}32/// ",
-" +[[+;:}}*33<333<3333<333333333333333<333333333333333333333$3333333$$$$33333$**::}}}}}}}}:}}:}}}}}}}}}}}}}}}:}}}}}}:}}}:}}}}}}:}}:}:}}:}}:}}}}}:^[/[ ",
-" +[[[;}}}13333333333333<333333333333333333333333~333333333333333333333~333$$$$$$$$$:}1}}}}}}}}:}}:}}:}}:}}}}:}:}:}}:}}}}}}:}}}}}}}}}}}}}}}}}:1;//// ",
-" +[[+|}}}13333333333333333333<33333333<33333333333333333333333333333333333333333$$$$$*}}:}}}}}}}}}}}}}}}}:}}}}}}}}}}}}:}}}}}:}}}}}:}}:}}}:}:%[/[/ ",
-" +[[[,:}}:333<3333333333<33333333333333333333333~333~33333~333333333333333333333$$3$$$*:}:}}:}}:}}:}}:}}}}}}}}:}}}}:}}:}}}}}:}:}}}}}}:}}}:-[/// ",
-" [[[[,}:}:$3333<33333333333333<33~3333333<33<333333333333333~33333333333333333333333333*:}:}}}}}}}}}}}}}}:}}}}}:}}}}}}}:}}}}}}}:}}}}}}}:|[//[ ",
-" +[[[,}}:}$333333<333333333333333333<3333333333333<33333333333333<33~333~3333333333333$$$*}}:}:}}:}}:}}}}}:}}}}:}}}}}}}}}}}:}}}:}}}:}:-[/[/ ",
-" [[[+|}}}}*$3333333~333333333333333333333333333333333<33333333333333333333333333333333$<$*}}}}}}}}}}}:}}}}}:}}}}:}:}}:}:}}}}}}}}:}}:-[[// ",
-" [[[+|:}}}*33333333333~33333333333333333333<3333333333333333333333<3333<333333333333$$$$$$*}}:}}:}}}}}:}}}}}}}}}}}}}}}}}}}:}}}}}}:-[/// ",
-" [[[[%}}}}:$3333333<3333333<33333333333333333333333333<333333333333333333<3333333333<3$3$3$}}}}}}:}}}}}:}}:}}:}}:}}:}}:}}}}:}}::4[/// ",
-" +[[[;:}:}}*33<3333333333333333~3333333<3333333333333333333333333333333333333333333$$$333$3}:}}}}}}:}}}}}}}}}}}}}}}}}}}:}}}:}:;[/// ",
-" [[/[(*}}}::33333333333333333333333333333333333<3333333<333333333333333333~333333333<$$333$}}}:}:}}}}:}}:}}}:}:}}:}}}}}}}}:1)[/[/ ",
-" +[[[(3}}}}}*3333333333333333333333333333<33333333333333333333333333~3333333<33333$<$<$333$:}}}}}:}}}}}}}:}}}}}}}}:}}}:}}*2[/// ",
-" [[[[+<:}:}}:33333<3333<333333<33333333333333333333333333<33333333333<33333333333333333333$}}}}}}}:}:}}}}}}}}:}}}}}:}}:<+[//[ ",
-" +[[[[|:}}}:}$33333333333333333333333333333333<333~333333333333<3333333<3333333333333333331:}:}}}}}}:}}}}:}}}}}:}}}}:-+//// ",
-" +/[/[)*}}}}}:$33333333<333333~3333333~3333333333333<33333<3333333333333333333333333333333}}}}:}}}}}}:}}}}}:}}}}:}1%[/[/ ",
-" [[[[+<:}}}}}13333333333333<333<333333~333333333333333333333333333333333333<333333333333*:}}}}:}}}}}}}}:}}}}:}}3([/// ",
-" [[[[[|:}}}}}:*3333333~33333333333333<3333<3333333333333333333333333<33333333333<3333333:}}}}}}:}}:}}}}}:}}}1,+//[/ ",
-" [/[[[(3:}}}}}}*3333333333333333333333333333<333333~3333333333333333333333333333333333$1}}:}}}}}}}}:}}}}}:*;[//// ",
-" [//[[|:}}}:}}}$333333333333<333333333333333~3333333<33333333333333333333<33333333333$}}}:}:}:}}}}:}:}:_+[/[/ ",
-" +/[[/(~:}}}}}}}*$3333333333333333<3333333333<33333333<333<333333<3333333333<3333333$}}}}}}}}}}}}}:}*%[[/// ",
-" [/[/[;*}}:}:}}}:$$333333333333333333333333333333333333333333333333333333333333333$}}:}}}}}:}}}}:,[[//[ ",
-" [[/[[+=:}}}}}}}}:*3333333~333333333<3333333<333333333333333333333333333333333333$}}}}}:}}}}::3([[/// ",
-" [[/[[(|:}}}}:}}}::$$333<3333~33333333333333333333~333<333333<333333333333333331}}:}}}}:}}*)[[/// ",
-" [[//[[(|::}}}}}}}}::$3333333~33333<3333333333<333333333333333<333333333<33333}:}}}}}}:*%[[//// ",
-" [/[/[[(|}::}}}:}}}}}1$33333333333333333~3333333333333333333333<33333333333*}}}:}:}$4[[//// ",
-" [/[/[/(|*:}}}}}}}}}}}:*$333333333~333333333<33333<33333333333333333333$*}}}}}}3;+/[/// ",
-" [/[/[[[=3}}}:}}:}}:}}}:1$$333333333333333333333333333333333333333333*}}:}1<)[[///[ ",
-" [/[/[/[(|::}}}}}}}}}}}}}:1*$33333<333333~3333333333333333<333<33$:}:}$|2[[///[ ",
-" [//[/[[+;<:}}}}}}}}:}}}}}}::**$$33333333<3333<33333333333333*:}}:,)+[///// ",
-" /[////[[)<1:}:}}}}}}:}}}}}}}}::*$$33333~3333333333333$*:}:1,;[//////[ ",
-" [[////[/[)|3:}:}}}}}}}}}:}}}}}}}}}}:::**1*$$**:*:::::$|)[[//[//[ ",
-" /[////[/[[(=<*:::}:}}}:}}}}}}:}}}}}}}}}}}}}:::<|)+[[/////[/ ",
-" [/////[[/[/((=|<31:::}:}}}}}:}:}:::1$<|=((/[////////[ ",
-" [////////[//[/[((((%|;=%|;=(((([[[[/[///[///[ ",
-" [////////[//[/[//[/////[///////////// ",
-" [[////////////[////////[/ ",
-" ",
-" ",
-" ",
-" ",
-" ",
-" "};
diff --git a/perl-install/pixmaps/mouse_3b+_mini.xpm b/perl-install/pixmaps/mouse_3b+_mini.xpm
deleted file mode 100644
index c4b4960b3..000000000
--- a/perl-install/pixmaps/mouse_3b+_mini.xpm
+++ /dev/null
@@ -1,211 +0,0 @@
-/* XPM */
-static char * mouse_3b+_mini_xpm[] = {
-"105 175 33 1",
-" c None",
-". c #0C1530",
-"+ c #FE9A02",
-"@ c #212F55",
-"# c #7C6535",
-"$ c #E8A518",
-"% c #B68725",
-"& c #DAA22A",
-"* c #95742E",
-"= c #E6A929",
-"- c #757C98",
-"; c #F7B01E",
-"> c #B2924F",
-", c #FDA106",
-"' c #61543C",
-") c #ACAECB",
-"! c #7E84A0",
-"~ c #AFB2CD",
-"{ c #878DAC",
-"] c #13234A",
-"^ c #E2A62E",
-"/ c #8D6F32",
-"( c #5B6485",
-"_ c #3A4461",
-": c #BABEDA",
-"< c #9A9ABD",
-"[ c #FEB212",
-"} c #D6A236",
-"| c #465173",
-"1 c #A6A8C6",
-"2 c #9EA0C0",
-"3 c #697293",
-"4 c #313C5E",
-" (3<|. ",
-" ((<|. ",
-" (-<4. ",
-" (-<4. ",
-" (3<@. ",
-" (!<]. ",
-" (|!<.. ",
-" (|!<]. ",
-" ((!{]. ",
-" (|<<.. ",
-" ||{<]. ",
-" (_!<.. ",
-" (|!<]. ",
-" (|!<]. ",
-" _!<@. ",
-" |3<@. ",
-" 33<4] ",
-" 2--<-@4 ",
-" {!!<<<!_] ",
-" (|<<<<<!]] ",
-" |_2<<<<<@. ",
-" |_{<<<<<_. ",
-" ||{<<<<<|] ",
-" |_!<<<<<3. ",
-" -(-<<<<<!]. ",
-" )13|_444__]_-! ",
-" ~)1{!((33-333((33--- ",
-" ~~1{{<~::~)11)111~:)<-(33 ",
-" ~~2{/|:12<<<<<<<<<<<<<:{]||(( ",
-" ~1{>;=@{2<<<<<<<<<<<<<<<|4[&'||| ",
-" ~){>;[[[|3)<<<<<<<<<<<<<<<]#[[[}|||| ",
-" ~1!^[;,;[#_:<<<<<<{<<<{<<<{]%[[[[;*4__ ",
-" ~<>;,+++[[%]:1<<<<<<<<<<<<<3]&[[[[[[&___ ",
-" ){>,,++++[[>]1~<<<<((((<<<<2(@[[[[[[[[='44 ",
-" 1!&,+++++[[[$]<:2<<@....]{<<1|4[[[[[[[[[;#@4@ ",
-" 1!^,+++++[[[[[@!:)<<@....]{<<)_'[[[[[[[[[;[#@@@ ",
-" 1!$++++++[[[[[[4-::<<].....{<<~@'[[[[[[[[[[[[#@@ ",
-" 1!&++++++[[[[[[[_3::1<4....4{<<:]/[[[[[[[[[[[[[#@@ ",
-" 1!&,+++++,[[[[[[['(:::<].....{<<:]/[[[[[[[[[[[[[;'@] ",
-" 1!}++++++;[[[[[[[['|:~:14....4{<<1]%[[[[[[[[[[[[[[[_@] ",
-" 1<>$+++++,[[[[[[[[[#|:::~@....]{<<1]%[[[[[[[[[[[[[[[$4]] ",
-" 1<!,+++++[[[[[[[[[[;/|::::4]..]4{<21]>[[[[[[[[[[[[[[[[>]]] ",
-" 2-;+++++,[[[[[[[[[[[/_::::......{<<{]}[[[[[[[[[[[[[[[[[*]] ",
-" 2!}+++++[[[[[[[[[[[[;/_:~::_....4{<2<]%[[[[[[[[[[[[[[[[[;']] ",
-" 1<*;++++,[[[[[[[[[[[[[%@::::].....{<<{]$[[[[[[[[[[[[[[[[[[&@]] ",
-" <-;++++;[[[[[[[[[[[[[[*4:::~@....@{<2<]=[[[[[[[[[[[[[[[[,[[*]] ",
-" 2!>,+++,[[[[[[[[[[[[[[[%@::::......{<<<]$[[[[[[[[[[[[[[[[[,[[_]] ",
-" <<![+++,[[[[[[[[[[[[[[[[*4:~::_...]4{<<!]=[[[[[[[[[[[[[[[[[[,[&]]] ",
-" <-$,++,[[[[[[[[[[[[[[[[[%@::::].....{<<!]&[[[[[[[[[[[[[[[[[[,,[#]] ",
-" <{%;++,[[[[[[[[[[[[[[[[[;*4:::~_....4{<<!]=[[[[[[[[[[[[[[[[[[,+[$@]] ",
-" <3=,+,[[[[[[[[[[[[[[[[[[[%@::~:......!<<!]=[[[[[[[[[[[[[[[[[[[+,[*]] ",
-" <!>;+,[[[[[[[[[[[[[[[[[[[[*@::::_...]_{<1{]=[[[[[[[[[[[[[[[[[[[,+,;@]] ",
-" <3[,+[[[[[[[[[[[[[[[[[[[[[*_::::......21:{]=[[[[[[[[[[[[[[[[[[[,++[*]] ",
-" <!>;+[[[[[[[[[[[[[[[[[[[[[[/_:~::_]..]_)::<]}[[[[[[[[[[[[[[[[[[[;+++[4]] ",
-" <3[,,[[[[[[[[[[[[[[[[[[[[[[/_::::......1::2]>[[[[[[[[[[[[[[[[[[[[+++,*]] ",
-" {!>[[[[[[[[[[[[[[[[[[[[[[[[[(|:~::|]..]|)::1]}[[[[[[[[[[[[[[[[[[[,++++[@]] ",
-" {-;[[[[[[[[[[[[[[[[[[[[[[[[['(::::......1::~]*[[[[[[[[[[[[[[[[[[[;++++,/]] ",
-" {{*[[[[[[[[[[[[[[[[[[[[[[[[[[_(::~:_]..]_)~::]%[[[[[[[[[[[[[[[[[[[,+++++,]]] ",
-" {3&[[[[[[[[[[[[[[[[[[[[[[[[[[_3::::......1:::@/[[[[[[[[[[[[[[[[[[[++++++;']] ",
-" {|%[[[[[[[[[[[[[[[[[[[[[[[[[[@-::~:4]..]_):::4#[[[[[[[[[[[[[[[[[[;++++++,_]] ",
-" {-_/[[[[[[[[[[[[[[[[[[[[[[[[[[]{::::......2:::||[[[[[[[[[[[[[[[[[[,++++++,@]]] ",
-" {33@[[[[[[[[[[[[[[[[[[[[[[[[[&]<:::~_]..]_1:::(|[[[[[[[[[[[[[[[[[,+++++++*]4(. ",
-" !{~@#[[[[[[[[[[[[[[[[[[[[[[[[%]~::::......1:::3][[[[[[[[[[[[[[[[[+++++++$@]{<]] ",
-" !3):{@>[[[[[[[[[[[[[[[[[[[[[[[*@:~:::(]..]3):~:{@[[[[[[[[[[[[[[[[+++++++,_]|::4] ",
-" !-::~3]*[[[[[[[[[[[[[[[[[[[[[[#_:::~::-(33:::::2]>[[[[[[[[[[[[[[++++++,$_](~2~3. ",
-" {-<~:::!@(;[[[[[[[[[[[[[[[[[[[[||::::::::~:::::::]>[[[[[[[[[[[[+++++++;%@]()2<)1]] ",
-" !3~:::::24@/;[[[[[[[[[[[[[[[[[[@-:~::~:::::~:~:~:4'[[[[[[[[[[[+++++,[%_]4{1<<<2:_] ",
-" !-:::::~::!4@(}[[[[[[[[[[[[[[[$]{::::::::::::::::(|[[[[[[[[,++,,,[$/4]@312<<<<<~-] ",
-" {-<~:~::::~::{|@@#>=[[[[[[[[[[[%]~:::::~::~:~:::::-][[[[[[[,[[;;%/_]]|!~1<<<<<<<11]] ",
-" !(~::::::::::::~!|@@4(*>=[[[[[['|:~:~:::~:::::::~:1]}[[[[[$%*#4@]]|-1~2<<<<{<<<<2:4] ",
-" --:::::~:::~:::::::2-(4@]@4|'#/@({<111)::::::~2)1<{@_/#'_@]]]4'-2~:22<<<<<<<<<<<<~3. ",
-" !-{::~::~:::~::~:::::::::){!((|_@@]]]]]]]]]]]]]]]]]]]@4||(-{1~::~22<<<<<<<<<<<<<<<11]] ",
-" -3~:::::::::::::::~::~::~~~)~~::::~:1112{<{<{<{)11~:::~::::~)12<<<<<<<<<<<{<<<{<<<2:@. ",
-" !3:::::::~::~::~:::::::::::~1<<<2111)~~~:~::::::~:~~~~111<<2<<<<<<<<<<<<<<<<<<<<<<<:(] ",
-" -{:~:~::~:::::::::~::~::::::::12<<<<<<<2<<<<<2<<<<<<<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<1{] ",
-" -32::::::::~:::~:::::::~:::::::::~2<<<<2{<<<<2{2{<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<{<<1~]] ",
-" -(:::::~:::::~::::~::::::~:~:~:::::~1<<<<<<<<{2<2<<<<<<<<<<<{<<<<<<<<<<<<<<{<<{<<<<<<~_. ",
-" --::~::~::::::~:::::~::::::::::~:::::~1<2{<<2<2{<<<<<<<{<<<<<<{<<<<<<<<<<<<<<<<<<<<<<~3] ",
-" !3{:::::::~:::::::~::::~::~::::::::::::::122<<<<<<<<<<<<<<<<<<<<<<<<<<<<<{<<<<<<<<<<<21{]. ",
-" -32::::::::~::~:::::~::::::::~::::~:~::::::)<<<<<<<<<{<<<<<<<<<<<<<<<{<<<<<<<<<<<{<<<<2:]] ",
-" -3:::~::~::::::::~:::::~::::::~:~:::::~::~::~)<<<{<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<<<<<<~_. ",
-" -3::::::::::~::::~::~::::~:~::::::::~::::::::::)<<<<<<<<<<<<<{<<{<<<<<<<<<<<{<<<<<<<<<<~(] ",
-" 3{:~:::~::~:::~:::::::::::::~::~::::::~::::::::::1<<<<<<<<<<<<<<<<<<<{<<<<<<<<<{<<<{<<<1{] ",
-" -32:::~::::::::::::~:::~::~::::::::~:::::~:~:~::::::1<<<<<{<<<<<<<{<<<<<<<<<<<<<<<<<<<<<2~]. ",
-" -(::::::~::~:::~::::::::::::::~:~:::~:::::::::~:~:~:~~1<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<<<<~4. ",
-" 33::~::::::~:::~::~::~:~:::~::::::::::~::::::::::::::::~2<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<~|] ",
-" 3!::::~:::::::::::::::::::::::::~:~:::::~:~:~::::::::~:::1<<<<<<<<<<<<<<<<<{<<<<<<<<<<<<<1-. ",
-" -3{:::::::~:::~:::~::::::~::~:~::::::::~:::::::~:~:~:::~:::~2<<{<<<<<<<<<<<<<<<{<<{<<{<<<<2<] ",
-" -(1:~:::~:::~:::~:::~:~::::::::~::::~::::::::::::::::::::~:::)2<<<<<{<<<{<<<<<<<<<<<<<<<<<<).] ",
-" 3(:::~:::::::::::::::::::~::~::::~:::::~::~:~::::::~::::::::::~1<<<<<<<<<<<<<<<<<<<<<<{<<<<:@. ",
-" 33:~::::~:::~:::~:~:::~:::::::::::~:::::::::::~:~::::~:~:::~::::)<<<<<<<<<{<<<<<<<<<<<<<<<<1|] ",
-" 3-:):::::~:::~:::::::::::~:::~::::::~:::~:::~::::~::::::~::::::::~1<<{<<<<<<<<<<<<<<<<<<{<<13. ",
-" 3{~~::~::::::::::::~::::::::::~:~::::~::::::::::::::~:::::~::::::::)2<<<<<<<<<{<<<<<<<<<<<<2!. ",
-" -(2~~::::::~::~::~::::~:~::~::::::::::::::~::~::::~::::::::::~:~::::::<<<{<<<<<<<<{<<<<<<<<<<2]. ",
-" 3(~1::~::~::::::::~::::::::::~::::~:~:~:::::::~:::::~::~::~::::::~:::::1<<<<{<<<<<<<<<<<<<<<<~]. ",
-" 3(:2:::::::~::~:::::~:~::~:~::::~:::::::~:~::::~::::::::::::~:~::::~::::~<<<<<<<<<<{<<<{<<<<<)@. ",
-" 33:2::~:::::::::~::::::::::::::::::::::::::::::::~:::~::~::::::::::::~::::2<<<<<<<<<<<<<<<{<<)|. ",
-" 33~1:::~::~::~:::::::::~::::~:~:~::~::~:::~:~:~:::~::::::~::::~:~:~::::::::1<{<<<<<<<<<<<<<<<2(] ",
-" ({11::::::::::::~:~:::::::~:::::::::::::::::::::::::~::::::~:::::::::~:~::~:)<<<<<{<<<<<<<<<<23. ",
-" ({1)~::~::~::~:::::::~::~::::::::~::~::~::~::::~:::::~::::::::~::::~:::::::::~<<<<<<<<{<<<<<<2!] ",
-" 3(22~::::::::::::::~::::::::~::~:::::::::::::~::::~:::::~:~::::::~:::::::~:::::~<<<<<<<<<<<<<<<<. ",
-" (()<~~::~::~::~::~:::::~:~:::::::::~::~:~::::::::::::~:::::~:~::::::~::~:::~:::::<<<<<<<{<<{<<<1]. ",
-" 3|:<~::::::::::::::~:~::::~::~:~::::::::::~:~:~::~:::::~:::::::~::::::::::::::::::2<<<<<<<<<<<<)]. ",
-" 3(~<~:~::~::~::~:::::::::::::::::~::~:::::::::::::::~::::::::~:::~:::~:::~:::~:~:::2<<<<<<<<<<<)@. ",
-" 33~<~:::::::::~::::::::::::~::::::::::~:~:~:~:::~:::::~::~::::::::~::::~::~::::::::~1<<<<<{<<{2)_. ",
-" (3)<~:::~::~::::~:~:~:~:~::::::~::~:~::::::::~:::::~:::::::~:~:~::::::::::::::::~::::2<<<<<<<<<1|. ",
-" (-1<~:~::::::::::::::::::~::~:::::::::~::::::::~:::::~::~:::::::~::~::::~:~:~:~:::~:::1<<<<<<<<1(. ",
-" (!2<~:::~::~:~::~:::~:::::::::::~:::~::::::~::::::~:::::::~::::::::::~::::::::::~:::~::2<<<<<<<1(] ",
-" ({2<~::::::::::::~:::~:~::~:~:~::::::::~:::::~::~:::~:::::::~:~::~::::::::~:::::::::::::2<<<<<<13. ",
-" ({2<):~::~:::~::::::::::::::::::~:::::::~:~:::::::::::~::~:::::::::~:~:~:::::~:::~:::~:::2<{<<<2!. ",
-" 3(22<)::::::~:::::::~::::~::::::::~:~:~::::::~:::::~:::::::~::::~::::::::~::~::~::::~::::::2<<<<2{] ",
-" (|2<<1:::~::::::~:~::::~:::~:~::::::::::::~:::~:~:::~::~::::::~::::::::::::::::::~::::~::~::2<<<1{. ",
-" 3|)<<1:~:::~::::::::::::::::::~:~::::::::::::::::::::::::~:~::::~:~:~::~::~::~::::::::::::::~2<<21. ",
-" (|)<<2::::::~:~:::~::~:~::::::::::~:~:~:~::~::::~:::::~:::::::~::::::::::::::::::::~::~::~:::~<<12]. ",
-" (|)<<2::~:::::::::::::::~:~:~::::::::::::~::::~:::~:~:::~:::::::~::~:~::~::~::~:~:::::::::::::~2)2]. ",
-" (|~<<<::~::~:::~:::~:::::::::::~::::::~::::~::::::::::::::~:~::::::::::::::::::::::~::~:::~::::::~.] ",
-" (|:<<<:::::::~:::~::::~::::::::::~:~:::~::::::::~::::~:::::::~:::~:~::~:~:::~::~::::::::~:::~::~::.. ",
-" ||:<<<):::~::::::::::::::~:~:~:~:::::::::::~:~::::~:::~::~:::::~:::::::::~::::::::~::~:::::::::::~]. ",
-" (|:2<<1::~::~:~::~:~:::::::::::::~:::::~:~:::::::::::::::::~:::::::~:::::::~::~::::::::~::~::~:::~]. ",
-" ||:<<<2::::::::::::::~:~:::~:::~::::~::::::::~:~::~::~::~::::~::~::::~::~::::::::~::~:::::::::::::.. ",
-" ||:2<<2:~::::~::::::::::~::::::::~:::::~::~:::::::::::::::~::::::~::::::::~::~::::::::~::~::~::~::]. ",
-" ||:2<<2~::~::::~:~:~:~:::::::::::::::~::::::::~::~::~::~:::::~::::::~::~::::::::~::~:::::::::::::)]. ",
-" |_)1<<{~::::~:::::::::::~:~:~::::~:~::::~::::::::::::::::~:::::~::~::::::~::~::::::::~::~::~::~::2.. ",
-" ||11<2<1:~:::~:::~::::~::::::::~::::::::::~::~::~::~::~:::::~:::::::::~::::::::~::~::::::::::::::2]. ",
-" (_<)<<<<:::::::~:::~::::::~:~:::::::~:~:::::::::::::::::~:::::~::::~::::~::~::::::::~::~::~::~:::{. ",
-" |_{)<<<<~~::~::::::::::::::::::~:~:::::::~::~::~::~::~:::::~::::~:::::::::::::~::~::::::::::::~::-. ",
-" _!~<<{<1:::::~::~::~:~:~:::~:::::~::~:~:::::::::::::::~:::::~::::~::~:~::~::::::::~::~::~:::::::(. ",
-" _3:<<<<<~:~:::::::::::::::::::::::::::::::~::~::~::~:::::~::::~:::::::::::::~::~::::::::::~:::~:|. ",
-" _|:2<<<<~:::~:~::~:::::~:~:::~:~::~:::~::::::::::::::~::::::::::~::~:::~::~::::::~::~:::::::~::~@. ",
-" 44:1<<<<<::::::::::~:~:::::~:::::::::::::~::~::~::~:::::~:~::~::::::~:::::::::~:::::::~::~:::::~.. ",
-" 442)<<<<<):::~:~::::::::::::::::~:~:~:::::::::::::::~::::::::::~::::::~::::~::::~::~:::::::::::{. ",
-" @!~<<<<<2~:::::~::~::::~::~:~:::::::~::~::~::~::~:::~:::~::~:::~:::::::~::::::::::::~::~::~:::(. ",
-" 4(:<<<<<<~:::::::::~:::::::::::::~::::::::::::::::::::~::::::::::~:~:::::~::~:~:::::::::::::~:_. ",
-" @4~1<{<<<2~:~::~:::::~:~:::::~::::::~::~::~::~::~:::::::~::~::::::::::~:::::::::~::~::~::~:::)]. ",
-" @@<~<2<<<<)::::::~::::::~::~::::::::::::::::::::::~:~::::::::~:~::~:::::~::~:::::::::::::::::-. ",
-" @(:<<<<<<<~::~::::~::::::::::~:~:~:::~::~::~::~::::::::::~::::::::::~::::::~::~::~::~::~::~:|. ",
-" @4:2<<{<<<2::::~:::::~::~:::::::::::::::::::::::~:::~:~::::~:::~::~:::~::::::::::::::::::::~]. ",
-" ]@{)<2<<<<<)~::::::~:::::::~:~::~:~::~:~::~::~:::~::::::::::~::::::::::~:::::~::~::~::~::~:-. ",
-" ](:<<<<<<<<~::~:~::::~::~:::::::::::::::::::::::::~:::~:~::::~::::~:::::~:~:::::::::::::::4. ",
-" ]])){<2{<<<2~:::::~::::::::::~:::~::::~::~::~::::::~:::::::::::~::::::::::::::~::~::~::~:<.. ",
-" @]3:<<<<<<<<<:::::::::~:::::::~::::~::::::::::~:~::::~:::~::~::::~::~:~::::~:::::::::::::|. ",
-" ]@:2<<2{<<<<<~:::~:~::::~:~:::~::::::::~::~::::::::::::::::::::::::::::~:::::::~::~::~:1]. ",
-" @]3:<{2<<<<<<<~:::::::~::::::::::~::~:::::::~:::~::~::~::~::~:~::~:::::::~::~:::::::::~(. ",
-" ]@~1<<<2{<<<<2~:::~:::::::~::~:::::::~::~:::::::::::::::::::::::::~::~::::::::~::~:::1.. ",
-" @]3:<<<<<<<<{2<1:::~::~::::::::~::::::::::~::~::~::~::~::~::::~::::::::~::~::::::::~:|. ",
-" ]]11<<<<<<<<<<<1:::::::~:~::::::~::~::~:::::::::::::::::::~:::::~::~::::::::~::~:::<.. ",
-" ](~2<{2<<<<<<<<<~:~:::::~::~:::::::::::~::~::~::~::~::~::::~::::::::~::~::::::::::_. ",
-" ]]{~<<<<<<<<<<{<<1~:::::::::::~::~::~:::::::::::::::::::::::::~::~::::::~::~::~::-.. ",
-" ]4~1<<{<<<<<<<<<<<1~::~:~::::::::::::~::~::~::~::~::~::~:~::::::::~::::::::::::2]. ",
-" ]](:2<<<{<<<<<<<<<<<1~:::~::~::~::~:::::::::::::::::::::::::~::~:::::~:::~::~:~|. ",
-" ]]{~2<<<<<<<<<<<<<<<<2)::::::::::::~::~::~::~::~::~::~:::~::::::~:::::~::::::3.. ",
-" ]]1~<<<<<<<<<<<<<<<<<<<2)~::~::~:::::::::::::::::::::~::::::~:::::~::::~:::<]. ",
-" ]4~)<{<<<<<<<<<<<<<<<<<<<<1~~:::~::~::~::~::~::~::::::::~::::~::::::::::~)@. ",
-" ]]|:1<<<<{<{<<<<<<<<<<<<<<<<<221)1~~~:::::::::::~::::~::::~::::~::~:::~::4. ",
-" ]](:1<<<<<<<{<{<<<<<<<<<<<<<<<<<<2<<<<221~~::::::~:::::::::::::::::~::~|.. ",
-" ]]3:1<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<2<1)::::::~:~::~:~::~::~::::~3.. ",
-" ]]3:)<<<<<<<<<<<<{<<<<<{<<<<<<<<<<<<<<<<<<<21:~::::::::::::::::::::3.. ",
-" ]]3:~2<<<<<<<<<<<<{<<<2{<<<<<<<<<<<<<<<<<<<<1:::::~:::~::~::~:~::(.. ",
-" ]](:~1<<<<<<<<<<<<<<<<<<<{<<{<<{<<<<<<<<<<<<<):~:::~::::::::::~(.. ",
-" .]|~:)<<<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<{<<<~:::::::~::~:::~|.. ",
-" ].42:~2<<<<<<<<<<<<<<<<<<<<<<<<{<<{<<<<<<<<<<~:::::::::::~14.. ",
-" ]]@!::~2{<<<<<<<<<{<<<<<<<<<<<<<<<<<<<<<<<<<2::~:~::~:::{]. ",
-" .]()::)2<{<<<<<<<<<<{<<<<{<<<<<<<{<<<<<<<<<~::::::::)3.. ",
-" ..@{:::)2<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<)::::~::{4.. ",
-" ..|2:::~1<<<<<{<<<<<<<<<<<{<<<<<<<{<<<<<):~:::)(.. ",
-" ].](1~::~12<<<<<<<<<<<<<<<<<<{<<<<<<<<<~:::~3].. ",
-" ..](2::::~)1<<<{<<<{<<<<<<<<<<<<<{<<1::)3@.. ",
-" ...|{~:::~:))2<<<<<<<<<<<<<<<<<<<1:2(].. ",
-" ...@({:::::::~)12<<<{<<<<{<<1)134... ",
-" ....]|3<~~:::::::::~~)~~1!(4.... ",
-" .....]@|((-!{{{!33|_]..... ",
-" .................. ",
-" ",
-" ",
-" "};
diff --git a/perl-install/pixmaps/mouse_3b.xpm b/perl-install/pixmaps/mouse_3b.xpm
deleted file mode 100644
index 4c8a3bd9a..000000000
--- a/perl-install/pixmaps/mouse_3b.xpm
+++ /dev/null
@@ -1,386 +0,0 @@
-/* XPM */
-static char * mouse_3b_xpm[] = {
-"210 350 33 1",
-" c None",
-". c #0A1630",
-"+ c #FE9A02",
-"@ c #253359",
-"# c #C99121",
-"$ c #F3AE18",
-"% c #D6A02C",
-"& c #96762E",
-"* c #3E4862",
-"= c #B68626",
-"- c #FDB820",
-"; c #FE9E02",
-"> c #E6AA32",
-", c #A67E2A",
-"' c #F2B22A",
-") c #7B84A1",
-"! c #7C673B",
-"~ c #5C6888",
-"{ c #B79346",
-"] c #0E1A3A",
-"^ c #F2B22E",
-"/ c #BABEDA",
-"( c #848CAA",
-"_ c #4A5778",
-": c #FEA206",
-"< c #A7A9C8",
-"[ c #757C94",
-"} c #9A9ABE",
-"| c #9FA1C0",
-"1 c #11244D",
-"2 c #AFB0CD",
-"3 c #697392",
-"4 c #FEB212",
-" ~_3}}}]]. ",
-" ~_)}}}].. ",
-" ~_)}}3]. ",
-" __(}}3]. ",
-" ~~*|}}3]] ",
-" ~__}}}_]. ",
-" ~~*|}}_]. ",
-" __~}}}*]. ",
-" ~__|}}@]. ",
-" ~~_}}}*]. ",
-" ~_~}}(@]. ",
-" __3}}}@]. ",
-" __3}}}]]. ",
-" __~}}}1]. ",
-" __3}}(]]. ",
-" __~}}}1]] ",
-" __3}}(]]. ",
-" ~_[}}}1.] ",
-" __)}}(1.. ",
-" __)}}}]]] ",
-" _*)}}}].. ",
-" _*)}}}1]] ",
-" _*)}}(]]. ",
-" _*~}}}1.] ",
-" __~}}(1.. ",
-" __3}}}]]] ",
-" _*~}}}]]] ",
-" __~}}}@]. ",
-" **3}}}@]] ",
-" **_}}}*]. ",
-" **_}}}@]] ",
-" ___}}}*1] ",
-" ~_*}}}_1] ",
-" )3*}}}_111 ",
-" (3*}}})@1@@ ",
-" |(~[}}}}}*@@@ ",
-" }(~)}}}}}}}_*@@ ",
-" [)~)|}}}}}}}}_@11 ",
-" ~_~|}}}}}}}}}}~]1 ",
-" __*}}}}}}}}}}}}1]] ",
-" ***}}}}}}}(}}}}@1] ",
-" _**}}}}}}}}}}}}*]] ",
-" ***}}}(}}}}}}}}_1] ",
-" **[}}}}}}}}}}}[]] ",
-" **)}}}}}}}}}}}(]]] ",
-" _*)}}}}}}}}}}}}1]] ",
-" _*3}}}(}}}}}}}}@1] ",
-" **~}}}}}}(}}}}}_]] ",
-" __~}}}}}}}}}}}}~]] ",
-" 3_~}}}}}}}}}}}}31] ",
-" )~_[3____**__~~~111 ",
-" <)~@111111111111111*_[) ",
-" 2<<||(3*@11111@**11111@@*_3[)))) ",
-" 2<<||()3[[)(}///////////2}}[33~~333[[[ ",
-" 2<<}(3)(</////////////////2//////<([~~~3333 ",
-" 2<<}([(|///////2<<|||}}(}}}}}}}}|<22////|)__~~33 ",
-" 22|()~*)///22||}}}}}}}}}}}}(}}}}}}}}}}|2///)@@*__~~~ ",
-" 22|([[%_1@//}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}<//@11!!@*__~~ ",
-" 22|(3&'--#11[/|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2}11@4->!@*___~ ",
-" 22([)>-444-@1_/2}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}_11!4444%!@*____ ",
-" 22}[[%--4-444!11//}}(}}}}(}}}}}}}}}}}}}(}}}}}}}}}@11#44-444#*@*____ ",
-" 2|(3{--444444$,11(/2}}}}}}}}}}}}}}}}}}}}|(}}}}}}}(111444444-4-=@@**_* ",
-" 22}[['-444$::444%11[/2}}}}}}}}(}}(}}}}}}}}}}}}(}}}}[11*444444444-$!@@**_ ",
-" 2|(3{-444:++++444411_//|}}(}}}}}}}}}(}}}}}}}}}}}}}}}311!444444444444{@@**** ",
-" 2|)[$-4$+++++++4444*1*//2}}}}}}}}}}}}}}}}}}}}}}}}}}}<*11=4444-44-4444-$_@@*** ",
-" 22([,-44;+++++++44444!11///}}}}}}}}}}}}}}}}(}}}}}}(}}}/@11%4-4444444444444&@@*@* ",
-" 2<(3{-4;++++++++;44444!11<2/2}}}}}}}}}}}}(}}}}}}(}}}}}}/1114444-444444-444-4{@@@*@ ",
-" 2|(3>-$+++++++++;4-4444=11}///}(}}}}}}}}}}}}}}}}}}}}}}}<}11@44444-44-444444444%*@@*@@ ",
-" 2|)3'4;++++++++++$444-44#11[///<}}}}(}}(}}}}}}}}}}}}}}}}2}11*44-4444444444444444$*@@*@@ ",
-" <})&'4;++++++++++$4444444>113///2}}}}}}}}}}}}}}}}}}}}}}}}/311!44444-44-44-444444444_@@@@@ ",
-" <|[[-$+++++++++++:44444444411~2///}}}}}}}}}}}}(}}}}}}}(}}}/~11!444-444444444444444444!1@*@@ ",
-" <}[&-$+++++++++++:444-444-44@1*////2}}}}}}}(}}}}}(}}}}}}}}|/_11&-444444-44-44-44-44444'!1@@@1 ",
-" <}3[-:++++++++++++444444-4444*1*//2//}}}(}}}}}}}}}}}}(}}}}}</*11#4444-4444444444444-4444-!1@@@1 ",
-" <}[&-:+++++++++++:4444-4444444*1@////2<}}}}}}}}}}}}}}}}}}}}}</*11#4-4444-44-44-44-4444444$'!1@@11 ",
-" <|[[-$++++++++++++4444444444444!11//////}}}}}}}(}}}}}}}}}}}}}2/@11$444-4444444444444-44-44444_1@@11 ",
-" <})&-:++++++++++++44-444-44444-4&1]////2/|}}}}}}}}}}}}}}}}}}}}2/111444444444-44-44-444444444444!1@@11 ",
-" <|)3'$++++++++++++$4444-444-44444!11/2////2}}}(}}}}}}}}}}}}}}}}2/11144-444-4444444444-44444444444*1@@1 ",
-" |(~'4++++++++++++4444444444444444=11}//////|}}}}}}}}(}}(}}(}}}}//11@444-4444-44-44-4444-444444444$*1@11 ",
-" |(3%4++++++++++++$4444-444-44-4444#11}2/////2}}}}}(}}}}}}}}}}}}}/|11*-4444-444444444444444-44-44444$@1@11 ",
-" <(~%-++++++++++++444-444-444444444-=11}///2///}}}}}}}}}}}}}}}}}}}/}11*444444444-44-44-44-444444444444#@1111 ",
-" |}[=-;+++++++++++:444444444-4444444-#11(/////2/2}}}}}}}}}}}}}}}}}}2}11*44-4444-444444444444-4444-444444,1@111 ",
-" |}[[-:+++++++++++$4444-44-44444-44444>11(/2//////}}}}}}}}}}(}}}}}}|/}11_4444-444444-44-44-4444-444444444-!1111 ",
-" |)3'4+++++++++++:4444444444-44444-4444113///2///2<}}}}(}}}}}}}(}}}|/}11&444444-44-444444444-4444444444444-*1@]1 ",
-" |(3%-+++++++++++$444-4444-44444-444444^11~////////2}}}}}}}}}}}}}}}}}/(1]&444-444444444-44-444444-4444-44444:@1111 ",
-" |}~{4:++++++++++:444444-4444-44444444444113////2////<}}}}}}}}}}}}}}}|/311!44444-44-44-444444-44-444-4444-4444=1@111 ",
-" ||[[-:++++++++++44444-44444444-44-4444-4^11~/2///////2}}}}}}}(}}}}}}}|2311&44-444444444444-44444444444444444-44!1111 ",
-" })~44++++++++++;4444444-44-44444444-44444113//////////<}}(}}}}}}}(}}}|/311!-444-44-44-44-444-44-44-44-444444444-*1111 ",
-" |(~%-;+++++++++$44-44-444444-4444-44444444*1~///2/2////2}}}}}}}}}}}}}}|/311&444444444444444444444444444-444444444%111]1 ",
-" |}[,-:+++++++++;-4444444-444444-44444444444*1_/2//////2//<}}}}}}}}}}}}}|/~11=444-44-44-44-44-444-44-444444444$44444&1111 ",
-" })~'4+++++++++$444444-444-44-4444-44-444-44*1*/////2/////2}}}}(}}}}}}}}|/311#-444444444444444-444444-444-44444:44444*11]1 ",
-" }(~%';++++++++;4444-44444444444-444444444444*1*////////////<}}}}}}}}}}}}|/3]1#44-44-44-44-444444-444444-44444444;4444%11111 ",
-" }}[)4$++++++++:44444444-44-44-44444-44-444444*1*/2/////2////2}}}}}(}}}}}}|2311#444444444444-44-444-44-4444-444444::4444&111] ",
-" })~44++++++++;-444-44444444444444-44444444444*1*///2/////////<}}}}}}}(}}}|/311#444-444-444444444444444444444444444;$444-*1111 ",
-" |(3{-:+++++++:444444-44-444-444-44444-44-44444*1*///////2/2///2}}}}}}}}}}}}/311#-444-4444-44444-444-444-444-4444444:+4444#111]1 ",
-" }[344+++++++;4444-4444444-444-444444444444-444*1*/2//2/////////<}}}}}}}}}}}2_11#44444444444-44444-444-444-444-4444-4;;444-!111] ",
-" })~>-;++++++:4444444444-4444444444-44-44-444444*1*/////////2////2}}}(}}}}}}}/*11#4-444-44-44444-4444444444444444-44444+;444>@1111 ",
-" }(3,-4++++++;-444-444-4444-44-444-44444444444444*1*/2////////2////2}}}}}}}}}}/*11#444-444444-4444444-444-444-4444444444;+:444&111] ",
-" })3'4++++++:44-444-4444-444444-444444-44-44-4444*1*////2/2/////////|}}}}}}}}}/*11#4444444-4444-44-444-444-4444-44-44444:++444-@1111 ",
-" }(3{44++++++444444444-4444-444444-44-444444444444*1*//2////////2///2/}}(}}}}}}/*11#44-44-444-444444444444444-444444444444+++444#111] ",
-" ([3-4+++++;4444-44-44444444-44-4444444-44-44-4444*1*////////2///2////<}}}}}(}}/*11#444444444444-44-444-44-44444-44-44444-:++;444*1111 ",
-" }(~%4$+++++4444444444-44-44444444-4444444444444-44*1*///2/2//////////2/}}}}}}}|/*11#444-444-444444444-44444444-444444-44444+++$44;111]1 ",
-" ([344+++++44444444-44444444444-4444-44-44-44-44444*1*2////////////2////2}}}}}}}/*11#-444-444-44-44-4444-444-444444-44444444++++4-$!111] ",
-" })~$4$++++4444-44-444-44-44-44444444444444444444444*1_2///2//2/2/////////<}}}}}</~11#444444444444444444444-444-44-444-444444:++++44%1111] ",
-" (3&44++++$44444444444444444444-44-44-444-44-44-4444*1*/2////////////2/////|}}}}2/311#-444-4444-44-44-44-44444444444444-4444-:++++:44!11]1 ",
-" })~>-:+++:4444-4444-444-44-44-444444444-444444444-44*1*///2//2///2/////2////<}}|//~11#444444-4444444444444-44-444-44-4444-4444+++++44$@11]1 ",
-" ([[-4;++$44-4444-444-444444444444-44-444444-44-4444411~///////2///2///////2//22///311#-44-4444-44-44-44-444444-444444444444444+++++;44!111] ",
-" })~>44++;44444-44444444-44-4444-4444444-44-4444444444113/2//2////////2///2///////2/311,44444-4444444444444-444444-44-44-4444444;+++++:4$@111] ",
-" ([&-4++:444444444-44-4444444-4444-44-4444444-44-444--113///////2//////2////2///////311!44-4444444-44-44-444-44-4444444444444444:++++++44&11]1 ",
-" })~>-4+;444-4444-444444-44-4444-4444444-4444444444-4441132////////2/2/////////2////2311&4444-44-44444444444444444-44-44-44-44444:++++++;4>@11]] ",
-" ([&-4:+444444-444444-4444444-4444444-4444-44-44-444444113///2//2////////2///////2///}11!4444444444-44-444-4444-444444444444-4444:+++++++:4!1111 ",
-" ()~>'4+$444-4444-44-444-4444444-44-444444444444444444-#11[/2/////2////2////2/////////(11&444-44-44444444-444-4444-44-44-444444444:++++++++4%111] ",
-" (3[-4::444444-44444444444-44-444444444-44-444-44-44444#11}/////////2////////2/2///2//}11!444444444-44-444444444444444444-444-444-:+++++++;:4!111] ",
-" ((~#-4:444-44444-4444-444444444-44-44-444444-444444-444#11(///2/////////2////////2///2}11*4444-444444444-44-44-44-44-444444-444-44:+++++++++4%1111 ",
-" ([3-4$44444-444444-444-44-44-444444444444-444444-444444{11}////2/2///2///2/////////////11*4-444-44-44-444444444444444-44-44444444-++++++++++:4_11]] ",
-" ((~=-4:4444444-4444444444444444-44-44-44-444-44-44444444!11}/2//////2///////2/2/////2///11*4444444444444-44-44-44-444444444-44-4444+++++++++++4#111] ",
-" ([~-4444-444444-444-44-44-44-444444444444444444444-4444-!11///////////2//////////2////2/1114-44-44-44-4444444444444-4444-444444444$+++++++++++:4*111] ",
-" (3=44:4444-444444-444444444444-44-44-44-44-44444-444-444!11////2////////2//////2////////*11444444444444-44-44-4444444-4444-4444444:+++++++++++:4,111] ",
-" ()_{44444444-44-444444-44-44-44444444444444444-444444444-*11/2/////2///////2/2//////2///2*11444-44-44-4444444444-44-4444444444-4444+++++++++++++4#11]1 ",
-" (3*&4444-44444444-44-444444444-44-44-44-44-44444-44-44444*1*/////2///2////////////2///2//*11#4444444444-44-44-4444444-44-444-444444+++++++++++++4,1111] ",
-" ()~@!44444-4444-444444444-44-44444444444444444-44444444444@1*//2/////////2//////2/////////311#4444-44-4444444444-44-444444-4444-444++++++++++++++$!111]1 ",
-" ([_1@-444444-4444-4444-4444444-44-44-44-44-44444-4444-444411_///////2//////2/2///////2////311,44-444444-44-4444444444-4444444444444++++++++++++++:*1111]] ",
-" )~_@1%-44-444444444-4444-44-44444444444444444-4444-444444$11~//2/2/////2/////////2/////2//(11&444444-4444444-44-44-4444-444-44-444+++++++++++++++%1111111 ",
-" ([_}11!44444-44-444444-4444444-44-44-44-44-444444444444-44#113////////2///2////2////2//////}11!4444-444-44-4444444444-4444-444444-:++++++++++++++$&111@)1] ",
-" )33/*]1%44444444-44-4444444-444444444444444-44-44-44-444-4=11(/////2////////2////////////2/<1]*4-44444444444-44-44-4444-4444-44444++++++++++++++;;@111[/11] ",
-" ()~</}11*44-44-4444444-44-4444-44-44-44-4444444444444444444!11}/2////////2///////2/////2/////11@444-44-444444444444444444444444-44+++++++++++++++4_]11@//_1] ",
-" )3~///*11&444444444-44444444444444444444-44-44-44-44-44444$!112//2////2///////2///2/2/////2//@11444444444-44-44-44-44-444-44-4444+++++++++++++++4=1111(//|11] ",
-" )~(///<@11%4444-44444-44-44-444-44-4444444444444444444-4444*11/////2//////2//////////////////*11>4444-44444444444444444-44444444;++++++++++++++4#@111~///2*]] ",
-" ))_/////(111%-44444-444444444-44444444-4444-44-44-44-44444-4@1*/////////2//////2///////2///2//~11#4-44444-44-44-44-44-444444-444++++++++++++++:4#@111@2/2//311 ",
-" )33//2///[11@=44-4444-44-444444-44-44444-444444444444444444411_2/2///2//////2////2//2/////////[11&444-44444444444444444-44-444$++++++++++++++$4%@]11*2/2}2/<1]] ",
-" )~}///2///~111&4444444444-44-44444444-4444444-44-44-44-4444#113///2//////2/////////////2///2//}11!444444-44-44-44-44-44444444;+++++++++++++:44&]111*2/2}}<//*1] ",
-" )[_/////////)111*>444-444444444-44-44444-44-4444444444444444,11(///////2/////2//2/////2///////2<11*44-44444444444444444-4444$++++++++++++++$4:_1111_2/|}}}|//)1] ",
-" )3[/////2//2/}@111&444-44-44-44444444-4444444-44-44-44-444-4!11}////2/////2////////2/////2//////@1@44444-44-44-44-44-444444:++++++++++++;444&@11113/2|}}}}}2/211] ",
-" ))_<//2///////22_111@,444444444-44-44444-44-4444444444444-44-*11//2////////////2////////////2////*11>444444444444444444-44;++++++++++++;444#@1]11@}22}}}}}}}<//*1] ",
-" )3~//////2///////(@111@,4-44-44444444-4444444444-44-44-444444@1*//////2//2//2////2//2//2/////2/2/~11=-44-444-444-44-444$:+++++++++++;4444,@1111@3/2|}}}}}}}}}//(1] ",
-" )3[////////2//////23@111@!%444-44-44444-44-44-44444444444444%]1_///2///2//////2//////////2///////[11&44444-444-444444$+++++++++++:$444%!@11111_</2|}}}}}}(}}}2//11] ",
-" )[_<///2/////////////23@1111*&>444444-44444444444-44-44-44444,11)2/////////2/////////2////////////|1]*44-44444444444;+++++++;;:444-4:,*111111_</2}}}}}}}}}}}}}<//_]] ",
-" )3~//2///2///2//2//////2)@11111*&%44444-44-44-44444444444-444!11<///2////2//2//2/2/////2///2//2////@1@4444-44-44$;+++++;::$44-444#&*111111@3//2|}}}}}}}}}}}}}}}//(1] ",
-" )~[///////2//////2//2/////|_11111]@!,%4444444444-44-44-44444$*1@//////2///////////2/////2///////2//*11%44444$:;+;:::$44444444%,!@1111111~(//2|}}}}}}}(}}}}}}}}}2//11] ",
-" ))~<////2//////2///////2//////(_@1111]1@*&=%4-444444444444444%11_//2/////////2///////2///////2//////311&444$:444444444444$#!_@]111111@_)2//<|}}}}}}}}}}}}}}}(}}}<//*1] ",
-" [3_//2//////2/////2/////2////////|3*11111111@*!&#>4-44-44-444,11(////2//2/2//////2////////2//////2//|1]*44444444444%#&!*@111]11111*~}////2}}}}}}}}(}}}}}}}}}}}}}}//)1] ",
-" )3)//////////////////2////2//////////}3_11111111111@*!!,##$44*1@/2///////////2////2///2///////2//////@11%44##,!!**111111111111*3(2////2|}}}}}}}}}}}}}}}}}}}}}}}}}2/21]] ",
-" [_|///2//2////2///2//////////2/2/2//2////2(3**111111111111111111_~3~~(}(}(}(|//2///2//////|(}(}(}(3~3*11111111111111111]@*3)|//////2|}}}}}}}}}}}}}}}}}}(}}}}}}}}}<//*1] ",
-" )3_/////////2////////////2/////////////2//////2/}}3~**111111111111111111111111111111111111111111111111111111111111@*_~)}2////////<||}}}}}}}}}}}}}}}}(}}}}}}}}}(}}}}/2[1] ",
-" )33////2///////2///2//2////2////////////////////////////(}(33_***111111111111111111111111111111111111111***~~3}}<2///////////2<|}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}2/<]1] ",
-" [~}//2///2///////2///////////2/2//2/2///2//2////<<22/2///////////////2}}}}}}}3333333~3~3~333(}}}(}}|//////////2///////2/22<|}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}2//@]] ",
-" )3_////////2/2//////2////2////////////2///////2////2|}|<<22/2///////////2/2/2///////////////////////////////////2///22<<|}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}//~1] ",
-" )33/////2//////2//////2////2/////2///////2//////2////2<}}}}}}||<<22///////////2/2//2//////2///2///2//2////2//2222||}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}(}}}(}}}}(}}}}}}}}2/(1] ",
-" 3~)//2////////////////////////2///////2////2///////2////<}}}}}}}}}}(}(|||<<<<222222////2///////222222<<<|||}}|}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}2//@1] ",
-" )[_2///////2//2///2//2///2///2/////2//////////2///2////2///2<}}}}}}}}}}}}}}}}}|}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}|//*]] ",
-" [3~////2///////2//////2///2/////2////////2//////////2////2///2<}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}(}}(}}}}}}(}}}}}}}}}}}}//[1] ",
-" [~)//2///2/////////2////////////////2/2////2///2///////////2////<|}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}(}}}}}}}}}}}(}}}}2/|1]] ",
-" [~(////////2////2/////2///2//2///2//////////2////////2////////////2|}}}}(}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}(}}}(}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}<//@1] ",
-" [3_/////2/////2/////////////////2///////2////////2//////2////////////2<}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}(}}}}}(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}//_1] ",
-" [33//2////////////2////2///2//////2//2///2////2////2/////2//2/2/////////2}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}(}}}}}}}}(}}}}(}}}}(}}}}}}}}}}2/(]] ",
-" 3~)//////2//2///////2////////2/////////////2/////////2//////////2/////////2|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}2/21]] ",
-" [_<///2////////2////////2////////////2////////2/2////////2////////2/2/2//2//2|}}}}}}}(}}(}}}(}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}|//@1] ",
-" [3_///////2///2///2///2////2///2/2//2///2//////////2///2////2//2///////////////2|}}}}}}}}}}}}}}}(}}}(}}}}}}(}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}(}}}}}}}}}}}}//~1] ",
-" 333////2////////////////////2////////////2//2///////2////////////2/////2/////////2<}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}}(}}}}}2/)]] ",
-" [~(//2/////2////2///2///2/////////2///2///////2//2///////2///2///////////2/2///////2<}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}</21]] ",
-" 3_|/////2////2///////2//////2//2//////////2///////////2//////////2//2///////2/////////<}(}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}|//@1] ",
-" [3~///////////////2///////2//////////2///////2//2///2//////2///2////////2////////////////<}}}}}}(}}}}}}}}}(}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}}}(}}}}(}}}}}}}}}}}}//~]] ",
-" [~3///2//2/2///2///////2/////2////2/////2///////////////2////2////2//2////////2/2//2/2/////<}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}}}2/)1] ",
-" 3~(//////////2/////2///////////2//////////2///2///2///2//////////////////2/2///////////2////2<}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}</|1]] ",
-" 3_|2/2/2////////2///2////2/////////2/2/////2///2////////2//2/2/2//2///2/////2///2////////2/////|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|//@]] ",
-" [3_///////2////2///////2////2/2///2/////2///////////2//////////////////////////////2//2/////////22|}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(}}}}}}}(}}}}(}}}(}}}}}}}}}}}}}}}}}(}}}}}2/_1] ",
-" 33~/////////2////2//////////////////////////2////2/////////2////2///2//2/2////2/////////////2//////2}}}}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}(}}}}}}}}}}}}}2/3]] ",
-" 3~)//2/2///////////2///2//2////2////2////2/////2/////2/2///////////////////2////2///2///2/2///2//////2|}}}}}}}}(}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}</}1] ",
-" 3_}//////2/2/2/2/////2//////2////2////2/////2//////2//////2//2///2//2////////////2/////////////////////<}}(}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}(}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}}}|//1]] ",
-" [3_/////////////////2////2////////////////////////2///2//2///////////////2//2/2///////2//////2///2/////2//<}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}2/*]] ",
-" 3~~/2/2/2////////2///////////2//2/2//2/2//2////2//////////////2///2///2////////////2//////2/////////2//////2<(}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}(}}}}22~1] ",
-" 3~3///////2/2/2/////2/2//2/////////2////////2/////2///2///2///////////////2//2//2//////2//////2//2///////////2|}}}(}}}}}}}}(}}}}}}}}}}}}}(}}}}}}(}}}}(}}}}}}}}}}}(}}}}}}(}}}}}}}}</[]] ",
-" 3~(///////////////2////////2//2/////////2//////////////////////2///2///2////////////2//////2/////////2/2/2/////<}}}}}}}}}}}}}}}}}{}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}|/|1] ",
-" 3_|////2//////2//////2/////////2///2/2////2/2/2/2/2/2/2/2/2/2///////2////////2///2//////2/////2////2////////2////<}}}}}}}}{}}}}(}}}(}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}//1]] ",
-" 33_//2/////2//////2/////2/2//2//////////2////////////////////////2//////2/2///////////2/////2///2/////////2/////2//2}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}2/*]] ",
-" 33~/////2////2/2/////////////////2///////////2////////////////2////////////2/2/2///2//////2//////2/////2/////2///////<}}}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}(}}}}}}}}}}</~1] ",
-" 3~3//2//////////////2/2////2//2////2/2//2/2////2///////////2/////2/2/2//////////2//////2////2/////////////2//////2////2<(}}}}}}}}}(}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}</(]] ",
-" 3~(//////2//////2///////2///////////////////////2/2/2/2/2///////////////////////////2/////////2//2//2/////////2/////////2|}}}}}}}}}}}{}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}/}1] ",
-" ~_}///2////2//2////////////2//2/2/////////2/2///////////////2/2//////2/2//2//2///2/////2//////////////2////2/////2/2/2///2<}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}2/]]] ",
-" 33_//////////////2/2/2///////////////2/2//////////////////2/////////////////////2/////////2//2///2///////2//////////////////2|}}}}}}(}}(}}}}}}{}}}}}}}}}}}(}}}}}}(}}}}}}}(}}}}}}}}}}}2/*]] ",
-" 3~~/2/2//2//2//////////2/2///////2/2/////////2//2/2/2//2///////2/2/2/////2/2/////////2////////2/////2////////2/2///////2//////|}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}</_1] ",
-" 3~3//22///////2////////////2/2//////////2//////////////////2////////2////////2//2/2////2///2////2////2//2/////////2/2////2/2///2|}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}|/3]] ",
-" ~~)//<///2///////2//2/////////////////2///2/////////2///2//////////////2////////////////2////////2////////2/////////////////2///2<}}}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}(}}}}}}}}}}}}}}}/(1] ",
-" 3_|//<//////2//////////2/2////2/2/2/////////2/2/////////////2/2/2///2//////2//2//2/2/2////////2///////2/////2/2///////2///////////2|}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}(}}}}}/21]] ",
-" ~_<//|////////2//2//2///////2////////////////////2////2/2/2////////////2////////////////2//2///////2///////////2/2/2////2////2/////2<}}}}(}}}}}}}{}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2/1]] ",
-" 33_//2</2/2////////////////////////2/2/2/2/2////////2/////////////2///////2//2///////////////////2//////2/2////////////////2////2/////2|}}}}}}}}}}}}(}}}(}}}}}(}}}}}}}}(}}}}}}}}}}}}}}}</*]] ",
-" ~~~//<2/////2//2//////2///2////2//////////////2/2///////////2//2/////2//////////2/2/2////2////2//////2/////2//////////2////////////2////<}}(}}}(}}}}}}}}}(}}}}}}}}(}}}}}}}}}(}}}}}}}}}}|/~]] ",
-" 3~)//|2//////////2/2////////2////2///////////////2///2////2///////2///2/2/////////////2////2////2/2///////////2//2/2////2////2///2///2///2}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}(}}|/3]] ",
-" ~~(//}///2////////////2/2////////////2/2/2/2///////2///2////2//2///////////2/2/////////////////////////2///2//////////////2///2///////2////|}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}/(1] ",
-" ~_|/2}/////2/2/2//////////2///2///2/////////2/////////////////////////////////2/2/2////2////2/2///2//////////////////2///////////////////2//<}}}(}}}}}}}}}}}}}}}}}}}}(}}(}}}}}}}}}}}}}}}221] ",
-" ~_</<|/////////////2//////////////////////////2/2////2//2/2//2//2/2/2///2///////////2////2/////2////2//2///2//2/2//2///2//2////2/2///2///2//22}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}22]]] ",
-" 33_//||/2////////2////2/2///2///2///2//////////////2//////////////////2///2////////2//////////////////////2//////////////////2//////////2///////|}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}(}}}2/*]] ",
-" ~~~//|<///2///////////////////2////////2/2//2///////2///2///2//2/////////////2//2//////2////2////2//2///////////2/////2////////////2/////////2///<}}}}{(}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}/_]] ",
-" 3~3//}<////2/2/2//2//////2//////2/2///////////2///////2//////////2////////2////////2/////2////2///////2/////2/////2/////2/2////2/2///////2/////2//2}}}}}}}}}}}}}(}}}}(}}(}}}}}}}}}}}}}}}}}/~]] ",
-" ~~)/2}2/////////////2//2///2/////////2////2/////2/2///////2///2////2/2/2/////2///////2/////////////2///2/2/////////2////////2//////2//2/////////2//2}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}/[]] ",
-" ~_(/<}2/////////2//////////////////////2////2///////2///2////2///2/////////////2/2/////2///2///2/2///////////2//2////2////////////////////2//////////|}}}}}}}}(}}}}}}}}}}}}}}}}}}(}}}}(}}}2(1] ",
-" ~_|/|}/2/2/2////////2///////2/2//2/2/////////2//2////////2//////////////2/2/////////2///2///2//////2//////2/////////////2////2/2//2//2/2/////2////2//2<}}}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}22]] ",
-" ~3_//}}///////2///2////2/2////////////2//2//////////2//////////2//2//2////////2////////////////////////2//////2////2///////2//////////////2/////2///////2}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}</1]] ",
-" ~~_//}(///////2////////////2///2//////////2//2//2////2/2////2//////////2///2/////2/2/2///2///2///2//2//////2////2/////2//2//////////2////////2////////2//2}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}<2*]] ",
-" ~~~/2}|/2//2////2//2/2///////////2/2///2//////////////////2////2/2//2//////////////////////////2/////2//2///////////2////////2/2/2////2//2//////2//2//////2|}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}|/*]] ",
-" ~~~/2}|/////////////////2///2///////2//////2//2///2////2////////////////////2/2///////2///2//////2//////////2////2///////2////////////////2///2////////2///2|}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}|/~]] ",
-" ~~)/<}|//2//2//2////2//2///2///2///////2//2/////2///////////2////2//2/2/2//////2/2//2///////2//////2//2///2///2///////2////2///////2///2////////////2////////<}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}/~]] ",
-" ~_)/|}|//////////2//////////////2//2///////2//////2//2///2////2///////////2////////////2////////////////////////2//2///////////2////2//////2///2/2///////////2<}}}(}}}}}}}}(}}(}}}}}}}(}}}}}/(]] ",
-" ~_|/|}<//2//2//2///2///2/2//2////////2//2/////2////////2/////////2//2/////////////2//2///2///2/2///2//2/2//////////////2////2///2/////////////////////2//2/////2}}}}}}}}}}}}}}}}}}}}}}}}}(}}2(1] ",
-" ~_}/}}</////////////2/////////2//2////////////////2///////2//2/////////2//2//2////////////2/////2///////////2////2//2////2///////////2//2///2/////2/2///////////2}}}}}}}}}}}}}}(}}}}}}}}}}}}22]] ",
-" ~~_//(}<//2//2//2///////2//2//2/////2//2////2////2////2//////////2//2//////////2//////2//////////////2////2////2//////////////2////2//////2////2////////2//2/2////2}}}}}}}}}}}}}}}}}}}}}}}}}}</]]] ",
-" ~~*/2}}<//////////2//2//////////2////////////2//////////2////2///////2//2//2/////2/2/////////2////2////2////2/////2////2///2////2////2///////////////2/////////2////}}}}}(}}}}}}}}}}}}}}}}}}}<2@]] ",
-" ~~~/2}}<//2///2/////////2//////////2///2//2///////2///////2///////2//////////////////2/2//2////2////////2///////////2///2//////////////2////2///2//2////////////////2|}}}}}}}}(}}}(}}}}}}}}}}</*]] ",
-" ~~~/<}}<///////2////2/////2//2//////2//////////2/////2/////////2//////////////2///////////////////2/2////2//2//2/////////////2///2////////2///2//////2//2/2//2///2////|}}}}}}}}}}}}}}}}}(}}}}|2*]] ",
-" ~_3/|}}</2//2/////2//////2/////2////////2///2/////2////2//2//2/////2/2/2/2/2///2/2////2////2////////////////////2//2/////2/////2///2//2////////////////////////2/////2/|}}}}}}}}}}}}}}}}}}}}}|/~]] ",
-" ~~)/|}}</////////////2////2/////2////2////////2/////////////////2//////////////////2////2///2//2//////2///2/2/////////2////2//////////////////2//2/////////2//////2/////|}(}}}}(}}}}(}}}}}}}}}/~]] ",
-" ~_)/}}}<//2///2////2/////////2///////////2///////2//2////2////2/////2/////////////////2//////////2/2//////////2//2//2////////2////2////2/2//2//////2/2/2/////////////////|}}}}}}}}}}}}}}}(}}}}/[]] ",
-" ~_|/}}}<///////2//////2///////////2//2////2//2///////2////2//////////2//2//2/2//2////////////2/////////2////2///////////2///////2///2///////////////////////2//2///2//2///|}}}}}}}}}}}}}}}}}}}/(]] ",
-" ~_}/}}(<///2/////2///////2////2/////////////////2///////////2///2////////////////2/2//2//2/////2////2////2/////2//////2///2///////////////2///2/2///////2///////2//////////|}}}}(}}}}}}}}}}}}}/(1. ",
-" __|2}|}<////2//////2//////2////2//2///2///2///////2////2//////////2//2//2////2////////////2//////2//////////2///2//2/////////2///////2/2/////////2//2////2//2///////2///2///|}}}}}}(}}}}}(}}}}22]] ",
-" ~~_//}}}<///////2/////2//////////////2///////2///2////2////2//2/////////2////////////2///////2////////2//////////////2///2//////2/2/////////2//////////2///////////2////////2/|}}}}}}}}}}}}}}(}221]] ",
-" ~_*/2(}}<2///2//////////2///2///2///////2///////////////////////2///2//////2////2/2/////2//////2///2///2/2///2//2/2/////////2////////////2////2///2///////////2/2/////2//2/////|}}}}}}}}}}}}}}}2/]]. ",
-" ~~_/<|}}<////////2//2/////2///////2///////2//2////2////2////2/////2//////2//2////////2/////2///////////////2////////2///2/////2////2/2//////////////2////2/2////////////////////|}}}(}}}}}}}}}}2/@]] ",
-" ~_~/<}}}</2///2//////2///////2////////2///////2////2////2////2////////2///////////2/////2//////2///2/////////////////2////2/////2////////2//2////////2///////////2/////2//2//2///}}}}}}}}}}}}}}22*]. ",
-" ~~~/<}}(</////////2/////2//////2//2/////2////////2/////////////2///2////2///2/2//////2///////2///////2///2///2/2//2//////////2////////2///////2/2///////2////2////2/2////////////2|}}}}}}}}}}}}</*.] ",
-" ~_~/<}|}|//2//2///////////2/////////2//////2///////2//2///2/////////2//////////////////2//2/////2/////2///////////////2///2//////2/2//////2//////2///2///2///////////////2////2////}}(}}}(}}}}}<2*]. ",
-" ~_)/|}}}|///////2///2///////2////2///////2////2/////////2////2//2//////2//2////2/2/2//////////////2///////2/////2///2///2///////////////2//////////////////2//2///////2////2/////2/2|}}}}}}}}}}</~]] ",
-" ~_)/|}|(|/2//////////2//2/////2///////2/////////2//2////////////////2///////////////////2/2//2/////////2/////2//////////////2/2//////2/////2/2////2/////////////2//2//////////2/////2}}}}}}}}}}</~]. ",
-" __)/|}}}|////2///2////////2///////2/////2/2//2////////2///2///2///2////2///2/2//////2//////////2///2///////2/////2///2///2//////2/2////////////2////2//2//2///////////2//2///////////2}}}}}(}}}</~1. ",
-" __[/|}}}(/////2//////2/////////2////2//////////2///2//////2//////////////////////2////2///2/////2///2///2/////2///2///2///////////////2////////////////////2//2///2/////////2/////2///<}}}}}}}}</~]] ",
-" ~_(/|}}}}//2//////2/////2///2//////////2///2///////////2///////2///2//2/2/////2////////2////2/////////2/////////////////2//2/2/////2///2/2//2////2///2//////////2///2///2/////2////////<}}}}}}}</[]] ",
-" __}/|(}}}2////2///2//////2//////2/2/////2///2//2/2//2//////2///2////////////2////2/2////////////2/////////2///2////2//////////2/2//////////////2///2///2////2/////////////////////2//2//<}}}}}}</(]. ",
-" ~_}/}}}}}2///////////2//////2///////2////////////////////2/////////2///2/2/////////////2//2///////2/////2///////2////2//2/2///////2//2////2///////////////2////////2/2///2/2///2/////////<}}}}}2/(1] ",
-" _*|/}|(}}22////2/////////////2///2////2/////2///2//2//2////////2////2/////////2////2/////////2///////2/////2///////////////////2///////2////2//2//////2//////2//2///////////2/////2////2//|}}}}2/(]. ",
-" __}/}}}}}<///2////2///2/2//////2////2///2/////////////////2//2//////////2//2/////////2/2//2////2///2/////////2///2////2////2////2//2////2////////2/2////2/////////////2///////2/////2//////|}}}2/(1. ",
-" __(/}}}}}|////////////////2/2////////////2///2//2//2///2////////2////2////////2/2///////////////2////2//2/////2////2////2///2///////2//////2//2///////////2//2///2/2////2//2///2////////2///2}<//(]] ",
-" ~_//(}}}}|////2/2//2////2//////2/////////////////////2/////2///////2///2//////////2////2/2//2/////////////2//////////////////////2////2//2//////////2//////////2/////2///////////2///2////2//////}]] ",
-" ~__//}}}|(}2//////////2///////////2//2/2///2/2////2/////2/////2///////////2/2////////2////////////2///2////////2/2///2///2///2/2//////////////2/2/2////2//2//2/////2////2///2//////2//////////2///21] ",
-" __*//}(|}}}////2///2/////2/2///2///////////////2////////////2////2///2//2/////2/2////////2//2//2////////2///2//////////2////////////2///2///2///////2/////////2///////////2////2///////2////2/////2]]] ",
-" __*//}}}}|(22///2////2/////////////2////2//////////2/2//2////////2////////////////2///2///////////2//////2////////2//////2//////2////2////////////2////2//2/////2///2///////2///////2////2////2///21]. ",
-" ___//|}}}}}2///////2//////2//2//2/////2///2///2//2///////////2////////2//2///////////////2//////////2/////////2/////2//////2//////2//////2////2//////2//////2/////2///2/2///////2/////////////////21]. ",
-" __*//<(}}}}|///2///////2/////////////////////////////2////2////////2////////2//2///2////////2//2/////2/////2///2/////////////2////////2////2///2//2/////2////////////////////2///2////2///2////2///].] ",
-" __*//|}}}}}|///////2//////2////2/2//2///2//2///2///2////2////2//2//////2/2//////////2/2/2/2//2///2/////2/////////2///2//2//////2//////////////////////////2///2////2//////2////////2////2////////2/]]. ",
-" __*//|}}}}}}/2//2/////2/////2////////////////////////2//////////////2///////2//2/2//////////////////////2//2//////2///////2////////2///2///2//////2//2/////2////2//////2/////2////////////2/2/////21.] ",
-" __*//|}(|}(|2/////2//////////////2///2////2//2//2///////2///2///2///////2//////////////////2//2//2//2////////2////////2/////2///2////2///2///2/2///////2/////2//////2//////////2////2/////////2///21.. ",
-" __*//|}}}}}}22//////2//2//2///2////////2////////////2////2///////2//2////2//////////////2/////////////////////2////2/////////2///////////////////////////////////2/////2//2//////2////2////////2///]]] ",
-" __*//<}}}}(|<///2////////////////2////////2////2/2////2//////2/////////2///2/2//2/2/2///////2/2//2///2//2/2/////2//////2//2//////2/2///2///2////2//2/2///2////2/////////////2///////////2///2////2/].. ",
-" __*//<}}}}|(|////////2/////2/2//////2/2////2/////////////2////2/////2/////////////////2///2///////2/////////////////2/////////2//////////////2/////////////2//////2/2///2////2///2/2/////2////////2]]] ",
-" __*//<}}}}}}}2///2/////2////////2/////////////////2///2/////////2///////2/////2///////////////2/////2//////2//2///2/////2////////////2///2///////2////2////////2//////////2////2/////2/////////2//21.. ",
-" _**//2(}}}}}|</////2////2/////////2/////2///2//2///////2///2/////2///2////2//////2/2///2/////////2////2/2////////////2/////2///2//2///////////2////2////2///2////////2///////////////////2//2/////<]]. ",
-" **</2|}}}(|(<//2/////////2//2//////2/////////////2//////2////2//////////2//////////2///2//2//2/////////////2///2////////2////////////2///2///////////////2/////2//////2/////2///2////2///////////(]] ",
-" _*}/2}}}}}}}|///////2//////////2/////2///2//2///////2////////////2///2/////2/2//////////////////2//2////2///2////2///2/////2///2//2///////2////2////2///////2////2///////2////////2/////2///2////(]. ",
-" **|//}}}}}}(|2//2/////2//2//2/////////////////2//2//////2//2///2////////2/////2/////////2//2////////2//////////////2/////////2////////2/////2////2////2////////////2///2/////2////////////////2//(1. ",
-" _*}//(}}}}|(|<////2//////////2////2/2//2//2//////////2/////////////2////2////////2/2/2///////////2//////2///2////////2//2//////2///2////////////////////2///2/2/////2/////2///2///2//2///2///////[]. ",
-" **3//||(|}}}}|/////////2///////2//////////////2///2/////2///2///2////2//////////////////////2/2////2/2////////2/2/////////2//////2/////2//2///2///2/2/////2/////2//////////////////////2///2/////~]. ",
-" **3//||}}}}}|(2//2//2/////2//////////2////2////2////2/////////////////////2/2/2//////2/2//2/////////////2////////////2//////////////2//////2///2/////////////////////2////2///2///2///////////2/2~]. ",
-" **~//|}}}}(|(|2////////2//////2//2/////2//////////////2/2///2///2//2///2///////2/2/////////////2/2////2///2//////2/////2///2//2/////////2////////////2//2///2////2/////2////////2///2////2//////2*.. ",
-" **_//<(}}|}||(|//2/////////2//////2/////////2/////2//////////2//////2///2///////////////2///2//////2////////2/2/////////2////////2///2/////2///2//2///////////2///2/////////2/////////2////2////2*]. ",
-" *@_//2|}}}}}(||2///2///2///////2//////2//2////2////////2///////////////////2//////2/2///////////////2//2/////////2//2///////2//////2//////////////////2///2/////////2///2/////////2//////////2//21.. ",
-" **@///(|(}}}|(}<////2////2//2//////2/////////////2//2///2/2///2//2///2//2////2////////2//2///2//2/////////2///2//////////2////2///////2////2///2///2///2//////2///////2////2/2/2////////2///////<].. ",
-" *@<//}}}}}}}|}|///////////////2//////2//2///2/////////////////////////////////2/////////////////////2/2////2///2/2///2/////////2///////2////////2/////////2////2///////2/////////2//2////2/////(]. ",
-" **(//|}}}}|(}|(2//////2///2/////2/////////////2////2//2///2//2///2//2//2//2///////2//2//2/2/2//2/2//////2//////////2//////2///////2////////2//////2////2////////2/2/2///2//////2////////////2//3]. ",
-" *@)//|}}}}}}}}|<//2/////2///2/////2//2//2///////2//////////////2////////////2/2////////////////////////////2/////////2//2///2///2///2///2////2/////////////2//////////////2/2/////2///2///2///2_]. ",
-" *@_//<}}}|(}|(}(///2/2/////////2///////////2/2/////2///2//2//////////2//2///////2/////////////////2//2//2///2/2/2/2//////////2///////2////////////2/2///2/////2//////2/////////2///2///2////2//*]. ",
-" @@*//2}(|(|}}}||<//////2//2//2///////2//2////////2///2///////2///2////////2////////2//2////2/2///////////////////////2//2/////////2/////2//2///2//////2////2///2/2/////2////2/////////////////2].. ",
-" *@@2//|}|}}|(|(|(///////////////2/2///////////////////////2///////2///2//////2///2//////2///////2/2//2//2/////////2///////2///2/////////////2////////////2/////////2/////2/////2/2/2////2///2/}]. ",
-" @*}//}}}}}}}}}|}2//2///2//2//////////2//2//2/2/////2//2//////2/////2///2//2//2////2//////////////////////2//2/2/////2//////2///2///2///2//////2//2/2//////2/////////2///////////////2////////3]. ",
-" @@3//<(}}}|(|(|(|///2//////2/2///2/////////////2/////////2////2/////////////////////2///2//2/2///////////////////2////2/2////////2//2/////2//////////2/2/////2/2/////////2/2///////////2////2_]. ",
-" @@_//<|}}}}}}|}|(//////////////2///2///2///////////2//2//////////2///2//2/////2///////////////////2/2/2////////////////////2/2/////////2////2//2//////////2//////2///2///////2/2/2///////2//2@.. ",
-" @@@///(}}}}}|(}}|(////2//2///////////////2//2///2//////////2//////2///////2//////2//2/2/2////2//2///////2/2///2//2/2/////2//////2///2////////////2/2///2///////////////2////////////2///////|].. ",
-" @@|//|}}}}(|}|}(|2/////////2///2//2//////////2/////2//2/////2////////2/////2//////////////////////////////2/////////2///////2///////2//2/2/2//////////////2///2/2/2//////2/////2/////2///2/3]. ",
-" @@3//<(}}}}|(}||(|2///2/////2//////2//2//2/////////////2/////2////2/////2/////2/2////////2//2////2//2////////2////////2////////2/2///////////2/////2////2/////////////2//////////2////2///2_]. ",
-" @@_//<|}}}}}}}}}|}2/2////2/////2/////////////2//2//2//////2///////////2////2//////2///2///////2///////2////////2/2//////2////////////2/////////2/////2/////2///////2/////2/2///////2//////2@.. ",
-" 1@@2//}|(}}|(}|(|(|//////////////2//2////2//////////2/2////////2//2////2/////////////////2///////2//////2/2////////2//////2/2/////2///////2//////////////////////2////////////2/2/////2///}]. ",
-" @@(//|}}}}}}}}|}|(<//2///2//2////////2//////2/////////////2/////////////2//2///2//2///////2///////2/////////////////2////////2///////2////2/2/2/2/2//2/2///2/2/////2/2////2////////////2/~.. ",
-" 1@_//<}}}|(}|(|(||(///2//////2//2/2//////2////2/2///2//2////2///2///2///////2////////2///////2//////2/////2/2//2//////2//////////2/2///2/////////////////2/////////////2/////////2//////2@.. ",
-" 1@@//2|(|(|}}}}|}(||//////////////////2////////////////////2//////2////2//2/////2/2///2/2/2/////2/////2//////////2/////2/2/2//2////////////////////2//////////2//2/////////2/2/2///2////}].. ",
-" 1@(//|}|}}}}|(||(|(<///2//2//////2///////2//2/////2///2/////2//////////////2////////////////2//////////2///2//////2//////////////////////////2///////2////2////////2////2///////////2//~]. ",
-" 1@_//<}}}}(|}}}}||(|2///////2//2///2///2//////2/////2/////////2///2//2////2///2/////////////////2/2//////////2/////////////2//2//2/2/2/2/2/////2///////2/////////////2////////2///////2@]. ",
-" 11@///(}}}}}}|(|(||(|///2///////////////////////2////////2/////2///////2/////////2/2/////2///2//////2//2///////2//2/2//////////////////////2//////2///////2/2/2/2//////////2/////2////|].. ",
-" 1@)//|}}}}(}}}}|}|}(<//////2////2//2///2/2///2///2///2////2///////2//////2//2/2/////2///////////////////2/2//////////2/2//////2/////////////2/////2/2////////////2///2/2////2//2//2//_]. ",
-" 11_//<|(|}}}}|(|(}||(<//2////2//2/////////////////2////////////2/////2////////////////2//2///2//2/////////////2//////////2/2///////2/2/2//////2/////////////////////////////////////2@.. ",
-" 111<//}|}}}}}}}}|}(|||/////////////2/////2///////////2//2///2//////2/////2///2//2/2///////2///////2/2/2////2//////2////////////2////////2/2//////////2/2//2//2/2/2/2////2///2/////2/).. ",
-" 11~//<(}|(}}}}}}|}}(|(////2////2/////2///2//2/2//2////////////2/////2////2///////////2//////2/////////////////2////2/2////2/2///2////////////2/2//2///////////////////////////2///2*.. ",
-" 11*//<|}}}}}(|(|}(||(||/////2/////2////////////////2////2////////2//////////2////2////////////2///////2/2//////////////////////////////////////////////2//2////////2/2/2/2/2//////}].. ",
-" 111(//|}}}}}}|(}||(|}|(<2//////2///2/////2////2/////2////2//2/////////2//////2///2///2/2/2/////////////////2//2/2////2/2////////2//2/2//2/2////2////2///////////2/////////////2///~]. ",
-" 11*//<(|}}}}}}}}}|(|}|(////2////////2////////////////////////2////2////2//////////2///////2///2/2/2///////////////////////2/2/////////////2/////2/////////2/2/////////////2////2<1.. ",
-" 111|//}}}}}}}}|(}||(||((<//////2//////2///2/2//2/2//2///2//////2////////2//2//2/////////////2/////////2/2/2////2/2/////2///////2////2////////////////2/2///////2////////////////3]. ",
-" 11_//<}}}}(|}}}}(|}}|||(2//2////2////////////////////2////2//////2//2///////////2//2//2//////////2///////////////////////////////////2////2//2//2///////////////2/2/2//2/2//2/2@.. ",
-" 111|//}}}}}}}}||(|(|(}||(</////////2///2///2///2/////////////2////////////2//2//////////2////2/////2///////2////2/2/2//2/2/2//2/2//////2/////////2/////2/2/2/////////////////2[... ",
-" 11_//<}}}}(}}}}}|}}|}(||(2//2//2////////////2///2////2////2//////2///2////////2//2//2////2////2/////2//2//////////////////////////2///////2///////2/////////2///////2///2///2@.. ",
-" 111|//}}}}}}}}}|(}}}|(}||(<///////2//2//2////////2////2///////2////////2///2////////2/////2///////////////2/2//////2//////2////2///////2/////2/////2//////////2/2///////////3... ",
-" 11_//|}}}}(|}(}|}(|}|}(||(2//2//////////////2//////////2///2////2///2////////2//2////2//////2/2/2///2/////////////////////////////2//////2////2/////2//2/2///////2///2///2/@.. ",
-" 111|//}}}}}}|}}}}|(}}||(||(|/////2///2///2///2//2/2///////////////////2//2//////2////2//2/////////////2////2/2/2////2/2////2//2/////2/2////2////2/////////////////////2///3... ",
-" 11_//<}}}(|(|}}}}}}}(||(||(<2///////////////////////2///2///2//2///////////2//////////////2////2//2///2////////2///////2///////2////////2////2///2//2////2///2///2/////22@.. ",
-" 111(//|}}}}}|(}}}}}|(}|(||(|(<//2//2///2/////2///////2////////////2////2/////////2//2//2///2/////////////2///////2//////2//2/////2///2///2////////////2/////////////////~... ",
-" 11*//<}}}}}}|}}(|}}|}}|}}||}|<//////////2/////2/2//////2///2//2////2//////2//2//////////////2//2//2///2///2///////2/////////2/////2///////2/2///2//2////2/2/2/2//2/2//<1.. ",
-" 111)//|}|(|(}}}}}}}}|(|(|(|(}(}/2///2//////2////////////2//////////////2///////2///2//2//2/////////2////////2/2////2/2//2///2//2/////2///////2///////////////////////2_]. ",
-" 11@<//}}}}}}}}}(}}}}}}}}|}|||(|<//////2/////2//2//2/////////2//2///2//////2///////////////2///2//////2///2/////2//////////////////2////2///////2//2/2/////////2///2/(1.. ",
-" 111~2/<}}}}}}}}}}}}}}|(|(|(}|(|(}/2////2////////////2////2//////2/////2////2///2///2//2///2///2//2////2///2//////2///2//2///2//2////////////2////////2/////2///////2*.. ",
-" 111|//|}}(|}}}}}(}}}}}}}}|}}|||(|</////////2///2/////2//////////////////////////2//////////////////2///////2//////2//////2////////2////2///////2//////2//////////23].. ",
-" 11@2/2}}}}}}}}|}|(}}}}|(|(|(}}|(|(<////2///2///2////////2//2///2//2///2////2////////2//2///2///2//////2///2//2//////2////////2////2///2///2////2//2//////2/2/2//<1.. ",
-" 111[//<}}(|(|(|(||}}}}}}}}}|}}(|}|}|</////////////2//2//////////////2////2///////2///////////2//////2//////////2//////2///2//////////////////////////2/////////2*.. ",
-" 111|//|}}}}}}}|(|(|(}}}}|(}}}|(|(}|(|<//2//2//2/////////2///2//2//////////2//2/////2///2///////2/////2////2//////2////////////2///2///2//2//2///2/////////////)].. ",
-" 11@///}}}}}}}}}}}}|}}}}}}}}}}}}}}}|}}|2///////////2//2///////////2//2////////////////2///2//////2//////2//////2/////2///2//2/////////////////2///2/2/2//2/22<1.. ",
-" 111~//2}}}}}}}}}|(}|(}}}}|(}}}}|(|(}}|(|22//2//2////////2//2/////////2///2///2//2//////////2//////////////2/////2////2/////////2///2////2//////////////////2*].. ",
-" 111(//<}}}}}}}}}}}}}}}}}}}}}(|}}}|}}}}}(|<2///////2/////////2////2////////2//////2////2//////2//2//2///2///////////////2///2////2////2////2//2///////////23].. ",
-" 11@<//|}}(}}}}}}}}}|(}}}}|}}}}|(|(}}}|}}|(|<22////2///2/////2///////2////////////2///////2//////////////2//2////2//////2/////////////////////2//2/2/2///(1.. ",
-" 111_///|}}}}}}(|}(|(|}}}}}}}}}}}}}}}(|(|(|}}||</////////2////////2/////2///2//2//////2////////2///2//////////2////2///////2//2///2///2////2////////////|@]. ",
-" ]11~2//}}}}}}}}}}|}}|(|(}|(}}}}}}}}}}}}|(|(}}((|<<2/////2////2/////////2////////2////2///2////2////2///2//////////2///2//////////2////2/////2//////2/2_].. ",
-" ]11(//2}}}}}}}}}}}(|}}}}}|}}}}}(|}}}}}}|}}}}|}}}}||<2/////2////2//2///////2//////////////////////2//////2///2////////////2//2////////////2////2////23].. ",
-" 111(///(}}}}}}}}}}}}}}|(|(}}}|}}}}}}}}}}}}}}}|(|(}}}(|<</////////////2/////2////2////2//2///2/////2/////////2///2////2///////////2///2////////////(].. ",
-" 11*<//<}}}(}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|}(|(}||<22///2//////////2////2/////////////////2///2/////////2///////2//2//2////////2//2///2|1.. ",
-" ]11@///<}}|(}}}}}}}|}}}}|(|(|(}}}}(|(|(}|(}}}}}}}}}}|}|}}}}}}}(}||<<222/2///////////2///2//2//2/////////2///2/////////2//////////2///2///////2/<@].. ",
-" ]11_///<}}}}}}(}}}}}}}}}}}}}}}}}}|}}}}}}|(|}}}}}(|}(|(|}}}}}}|}}}}}}}(|}}}||<22//////2/////////2///2/////////2///2///////2////////2////2////22*... ",
-" ]11_///2}}}}}|(}}}}}}}}}}}}|(}}(}}}}|(}}}}}}}}}}}}}}|(}|(}}}}}}|(}}|}}}}}}}}|(}|<2///////2/////////2////2////////2//2////2//2/////////2////2_... ",
-" ]113///2}}}}}}}}}}(}}}}}}}}}|}}}}}}}}}}}(|(|}}}}}}}}}}}}}}}}}}}|}(|(|(|}(|(|}}}}}}|2//2////2//2//////2/////2/////////////////2////2//////2_].. ",
-" ]113///2}}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}|(}}}}}}}}}}}}(|(|(}}}}}}}}|}|}}}}}}}}}}}<2////////2///////2////2///2///2///2////////////2//23].. ",
-" ]11[///2|}(}}}}}}}}(}}}}}}(}}}}(}}}}}}}}}(|}}}}(}}}(|(|}|}}}}|}}}}}}}(|}(|(|(|}}(|}}}|2/////////2///////////2///////////2//2//2//////231.. ",
-" ]113////<}}(}}}}}}}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(|22///2////2////2////////2//2/////////////2///3].. ",
-" ]11[////|}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}}}(|(|}}}}}|}}<//////////2////2////2//////2////2///2///2231.. ",
-" .11[2///2}}}}}}}}(}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|}}|(|(|(}|(}}(</2//2/////////2////////////2///////2///3].. ",
-" ]]1_////2|}}}}}}}}}(}}}(}}}}}}(}}}}}(}}}}(}}}(}}}}}}}(}}}}}}(}}}(}}}}}}}}}}}}}}}}}}|}}}}<//////2//2///////2//2/////////2/////<~].. ",
-" ]11_2////<}}}}}}}}}}}}}}}(}}}}}}}}|}(}}}}}}}}|(}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}|(}}}}|(}/2///////////2/////2//2///2///////2_].. ",
-" ]]1@2////<}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}(|}}}}}}}}|/////2//2//2////2//////2////2//2<*].. ",
-" ]11@}2////<}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}|(}}}}}}}}}(/2///////////////2////////////<@].. ",
-" ]]11(/////2|}}}(}}}}}}}}}(}}}(}}}}}(}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}(|}}}}}}}}}}}(|}}}(|}|///2//2//2/2//////2////2//2/(11.. ",
-" ]]11~/2////<}}|(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}(}}}}}}}}}}}(}}}}}}}}}}}}}}}}}|///////////2//////2///////31... ",
-" ]]1*</////2<}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}(|}}}}(}}}}}}}}}}}}}}}}(|(|}}}}(|///2/////2///2////////2/<_1... ",
-" ]]11(/2////2}}}}}}}}}(}}}}}}}}}}(}}}}(}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}|}(|//2//2////////2//2///2|@... ",
-" .]11~///////<|}}(}}}}}}}}}}}}(|}}}}}}}}}}}}(}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}}}(|}}}}}}//////////2//2/////2/311.. ",
-" ].]1@}2//////2|}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}|}}}}}}}|(}}}}}(<//2///2///////2///<_1... ",
-" ]]11~2///////<}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}}(}}}}}}}}}(|}}}}}}}}}}(}}}}(|}}}}}}}}}</////////2/////22)@].. ",
-" ].]1@(/2//////2|}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}(}}}}}}}}}}}}}|(}}}|(|//2//2/////2///<_]... ",
-" ]]]1_<2///////2<}}(}}}}}}}}}}}}}(}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|////////////22)1]... ",
-" ]]]11~/2////////2|}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}(}}|(}|(|////2///2///(@]... ",
-" ]]]1@3/2////////2<|}}}(}}}}}}}}}}}}(}}}}}}}}}(}}}}}}}}}}}(}}}(}}}}}}}|}}}}}}}2/2////2//2|_1]].. ",
-" ]]]1@[2//2///////<<|}}}}(}}|(}}}}}}}}(}}}}}}}}}}}}}}}}}}}}}}}}}}}}}|(}}}}}}/////////|~1]... ",
-" ].]]1@3/2//////////<<}}|}}}}}}}}}}(|}}}}}}}}}}}}}(}}}}}}}}}}}}}}(}}}}}}}}</2///2/|_11... ",
-" .]]]1@[<2//2//2/////2<|}}}}}}}}}}}}}(}}}}}(}}}}}}}}}(}}}}(}}}}}}}}}}}}|///2//(~1]... ",
-" ..]]11_|////////////2/<<|}}}}}}}}}}}}}(|}}}}}}}}}}}}}}}}}}}}}}(|(|(2////2(_11... ",
-" .]]1]1*32/2/////////////2<|}}}}}}}}}}}}}|(}}}}}}}}}}}}}}}}}}}}}|///2|3@].... ",
-" ...]11_)22/2//////2/////22<<|}}}}}}}}}}}}(}}}}(}}}}(}}}}}}<2/22)*@1]].. ",
-" ...]]11_)/2/2////////////////2<<|}}}}}}}}}}}}}}}}}}}|<<//2[_11..... ",
-" ..]]]]1*3(2/2/2/////////2////////222<<<<<<<<222///2|3*1]].... ",
-" ....]111@~(<2/2///2////////2///////////////2)~_1]]..... ",
-" ....]]]1]1@_3)(2222/2/////////2222<)[_*@]]].].... ",
-" ....]]]]1]111@@**_~_~~_~_*@*11]]]]....... ",
-" .........]]]]]]]]]]]]]]]......... ",
-" .................... ",
-" ",
-" ",
-" ",
-" ",
-" ",
-" "};
diff --git a/perl-install/pixmaps/mouse_3b_mini.xpm b/perl-install/pixmaps/mouse_3b_mini.xpm
deleted file mode 100644
index d7ecefe60..000000000
--- a/perl-install/pixmaps/mouse_3b_mini.xpm
+++ /dev/null
@@ -1,211 +0,0 @@
-/* XPM */
-static char * mouse_3b_mini_xpm[] = {
-"105 175 33 1",
-" c None",
-". c #0C1834",
-"+ c #FE9A02",
-"@ c #303C5D",
-"# c #AB8128",
-"$ c #E7A418",
-"% c #DAA22A",
-"& c #95742E",
-"* c #E6A929",
-"= c #747C98",
-"- c #62543B",
-"; c #F7B01E",
-"> c #FEA005",
-", c #B7944C",
-"' c #ACAECB",
-") c #816834",
-"! c #7C85A3",
-"~ c #AFB2CF",
-"{ c #A28C5E",
-"] c #5F6A8B",
-"^ c #E2A62E",
-"/ c #14254C",
-"( c #424E6E",
-"_ c #FEB212",
-": c #BABEDA",
-"< c #6B7491",
-"[ c #848BA9",
-"} c #9A9ABE",
-"| c #D6A236",
-"1 c #A6A8C7",
-"2 c #9FA0C0",
-"3 c #515D7F",
-"4 c #CB9420",
-" ]]}3. ",
-" 3]}(. ",
-" ]<}@. ",
-" 3=}@. ",
-" 3=}/ ",
-" 3!}/ ",
-" 3!}. ",
-" (!}. ",
-" 3[}. ",
-" ([}. ",
-" (}}. ",
-" (!}. ",
-" (!}. ",
-" (!}/ ",
-" (=}/ ",
-" (=}@ ",
-" ]<}@. ",
-" ==}<@@ ",
-" !!}}}!@/ ",
-" 3}}}}}[/ ",
-" (}}}}}}/ ",
-" @}}}}}}(. ",
-" ([}}}}}3. ",
-" (!}}}}}<. ",
-" 3!}}}}}!/ ",
-" ](@@@@@@/( ",
-" '2}[]3<]==<]3]]=== ",
-" 2}[2'::~'~1111'':1}=]]] ",
-" ~2[=(:22}}}}}}}}}}}}2:[/3(]3 ",
-" 2[,_$/}1}}}}}}}}}}}}}}2(@_%-(33 ",
-" '[,;___(]'}}}}}}}}}}}}}}}/)___4((( ",
-" 2[^_;>__)@:}}}}}}}}}[}}}}!/#_____&@(( ",
-" ~}{_>+++__#/:1}}}}}}}}}}}}}</$______4@@@ ",
-" '[,;>+++>__4/~~}}}}}}}}}}}}2]/________;-@@ ",
-" 1!%>+++++___*/}:2}}[}}}}}}}}13@_________;)@@ ",
-" 2!*>+++++_____/[:'}}}}}}}}}}}1@-_________;;)/@ ",
-" 1!$++++++______@=::}}}}}}}[}}}~@-____________)// ",
-" 2!%++++++_______(]::'}}}}}}}}}}:/&_____________)@/ ",
-" 1!%>+++++>_______-3:~:}}}}}}}}}}:/)______________-// ",
-" [,>+++++_________-3:::2}[}}}}}}}1/#_______________(// ",
-" }{>+++++>_________)3:::~2}}}}}}[21/#_______________$@// ",
-" }=_+++++;__________)(~:::2}}}}}}}}1/4________________4// ",
-" 2!$+++++>___________)(:~::~}}}}}}}2}/4_________________&// ",
-" [4>++++_____________&(:::::2}[}}}}2[/4__________________(// ",
-" }{;++++>_____________#@~::~:~2}}}}}2}/%__________________$// ",
-" }=*++++_______________&@::::::2}}}}}}}/*________________>__&// ",
-" !4>+++>_______________#@~:::::~}}}}}}[/$_________________>__(/. ",
-" [!_+++>________________&@:~:~:::2}}[}2!/*__________________>_%// ",
-" =*>++>_________________#@:::::::~}}}}}!/%__________________>>_)/. ",
-" [{_++>__________________&@~:::~:::'}}}}!/*__________________;+;;// ",
-" }<;++>___________________#@::~::::::2}}}!/*___________________++_&// ",
-" !,;+>____________________&@::::~:::~:}}1[/*___________________>+>;@/ ",
-" [=_+>_____________________&@~:::::::::~1~}/$___________________>>+;&// ",
-" !,;>______________________)(::::~:::~::::}/|___________________;+++_@/ ",
-" [=_>;______________________)(:~:::::::::::}/4____________________+++>#./ ",
-" [{_>_______________________-(::::~::~:::~:1/,___________________>++++;@. ",
-" <__________________________]3::~::::::::::~/#____________________++++>&// ",
-" !#__________________________(]:::::::~:~::::/#___________________>+++++;/. ",
-" <|;_________________________@]::::~:::::~:::@)___________________>+++++>-/. ",
-" [(4__________________________@!:~:::~:~::::::@)__________________;++++++>-// ",
-" =@)__________________________.[:::::::::::~::((__________________>++++++>/// ",
-" !<<@_________________________%/}:::~::::~:::::](_________________>+++++++#/@3. ",
-" ![~/)________________________,/':~:::::::~::::</_________________+++++++$//[2/ ",
-" <~:[/,_______________________&/::::~:~::::::::[/________________+++++++>(/3::@. ",
-" !<:::</#______________________)@::::::::~::~:::1/,______________++++++>$@/3~2:</ ",
-" =}::::!/3_____________________(3:~::::~:::::::::/{____________++++++>_#//]'}}1'. ",
-" ]~:::::2(/)___________________@<:::~:::::~:~:~::@)___________>++++>_#(/@[12}}}:(. ",
-" !=::~:::::!@@]|_______________%/}:~::::~:::::::::3(________>++>>>_$&@//=~2}}}}}~=/ ",
-" =}:::::~::::!(/@],*___________#/~:::::::::::~::::</________>__;4)@//([~2}}}}}}}1'/ ",
-" ]~::~::~::::::'=3/@@3&,*______-(::~:~::~:~:::::::'/,_____$4&)@///(=''2}}}}}}}}}2:@. ",
-" ==::::::::~::::::::2=3(///@(-)&/3}}1111::::::~121}[@(&)-@////@3=2::1}}}}}}}}}}}}}~=/ ",
-" =[::::::::::~:::~:::::::~[!<3(@@/////////////////////@(3]=[2::~'1}}}}}}}}}}}[}}}}11. ",
-" ]~:~:~::~::~:::~::::~:::~''~~:::::~1112[}[[}[}111~::::~:::~'122}}}}}}}}}}}}}}}}}}2:@. ",
-" =<::::::::::::::::~::::::::~1}}2221'~~~:~:::::::~:~~~''112}}}}}}}}}}}}}}}}}}}}}}}}}~]. ",
-" =[:::::~::~:::~:::::~::~::::::12}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}[}}}}'[/ ",
-" ]1~:~:::::~::::~::::::::::::::::~2}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1~/ ",
-" ]::::::~:::::~::::~::~:~:~:~:~::::~1}}}}}}}}}}[2}}}}[}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}:(. ",
-" ==::::::::::::::~::::::::::::::::::::~1}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}[}}}}[}}}}}}}}}}'<. ",
-" <[:~::::::~:::~::::~::::~::::::~:~:::::~12[}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}}}}}}[}}}}}1}. ",
-" <1:::~:~::::::::~::::~::::~:~:::::::::::::'}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}2:/ ",
-" ]::::::::~:~:::::::::::::::::~::::~::::::::~'2}}}}}}}}}}}[}}}}}[}}}}}[}}}}[}}}}}}}}}}}:(. ",
-" <=::::~:::::::~:::~::::~:::::::::::::~:~:::::::'}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}']. ",
-" <[:~::::~:::::::::::~:::~:~:~::~:~::::::~::::~::~'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1[/ ",
-" ]1::~:::~::~:~:::::::::::::::::::::~::::::~::::::~:1}}}}}}}}[}}}}}[}}}}}}[}}}}}}}}}[}}}2~. ",
-" ]::::::::::::::~:~::~:~::::::~:~::::::~::::~::::::::~2}}}}}}}}}[}}}}}[}}}}}}[}}}}}}}}}}}:@ ",
-" <]:::::::~:::~:::::::::::~::~::::::::~:::~::::~::::::::'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}'3. ",
-" <!~::::::::~::::::~:::::::::::::~:~::::::::::::~:~::::::~1}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}}1=. ",
-" <[::~:~:::::::::~:::::~:::~:~::::::::~::::~:::::::~:~:::::~2}{}}}}[}}}}}}}[}}}}[}}}}}}}}}2}. ",
-" ]1:::::::::::~::::~::::~::::::~:::~:::~::::~:~::::::::~:::::~2}}}}}}}}[}}}}}}}}}}}}}}[}}}}~/ ",
-" ]:::~:~:~:~:::::::::~:::::::~:::~:::::::~::::::~:::~::::::::~:2}}}}}}}}}}}}}}}}}}}}}}}}}}}~@ ",
-" ]:~::::::::~::~:~::::~:~::::::::::::~::::~:::::::::::~::~:~::::~}}}}}}}}}}[}}}}[}}}}}}}}}}'(. ",
-" ]!:~:::::::::::::::~::::::~::~:::~:~:::~:::::~::~::~::::::::::::::2}}}}}}}}}}}}}}}}}}}}}}}}1]. ",
-" ][~~:~:~:~:::~::::::::::::::::~::::::::::::::::::::::~::~::::~:::::'}}}}}}}}}}}}}}}}}}[}}}}2[. ",
-" ]2':::::::::::::~:::~:::~:~::::::::~:::::~:~::~:::~::::::::::::~::::~}}}[}}}[}}}}[}}}}}}}}}}2. ",
-" ]~1:::::~:~:::~::~:::~::::::~::~::::~:~:::::::::~:::~::~::~::~:::~::::'}}}}}}}}}}}}}}}}}}}}}~/ ",
-" 3:2~:~::::::~::::::::::::::::::::::::::::::~:~:::::::::::::::::::::::::~}}}}}}}}}}}}}}}}}}}}'@ ",
-" <:1::::::::::::~:~:~:~::~:~::~:~::~:::~:~:::::::::~::~::~:::::~::~::~::::2}}}[}}}}[}}}}[}}}}1(. ",
-" ]<'1::~:~::~:~:::::::::::::::::::::::::::::::~::~:::::::::~:~::::::::::~:::2}}}}}}}}}}}}}}}}}13. ",
-" ][11::::::::::::::::::~::~::~:::~:::~:::::::::::::~::~:::::::::~::~::::::~::'}}}[}}}}}}}}}}}}2<. ",
-" ][1':::::~::::~::::~::::::::::::::~::~:~:~:~:~:~::::::~:~::::::::::::~:::::::~}}}}}}[}}}}}}}}}[. ",
-" ]22'::~::::~:::~::::~:~:::~::~:::::::::::::::::::~::::::::~:~::::~:~::::~::~::~2}}}}}}}}}[}}}}}. ",
-" 3'}~~:::~::::::::~::::::::::::::~:~::::~:~::~::::::~::::~:::::~:::::~::::::::::~}}}}}}}}}}}}}}'. ",
-" 3:}~::::::::~:::::::::~:~::~:~::::::~:::::::::~::::::~::::~:::::::::::~::~::~::::2}}}[}}}}}}}}~/ ",
-" ]~}~::~::~:::~:~::~::::::::::::::::::::::~:~:::~::~:::::~:::~::~::::::::::::::::::2}}}}}}}}}}}~/ ",
-" ]~}~::::~:::::::::::~::::~:::~:::~::::::::::::::::::~:::::::::::~::~::::~::::~::~::1}}}}}}}[}}~( ",
-" ]<1}~~:::::~::::~::~::::~:::::::~::~:~:~::::~:::::~:::::~:::::~:::::::~::::~:::::::~:2}}}}}}}}}1(. ",
-" ]=1}~::~:::::~::::::::~::::~:::::::::::::~::::~:~:::~::::~:~::::::~:::::::::::~:::::::2}}}}}}}}13. ",
-" 3!1}~::::::~::::~::~::::::::~:~:~::~:::~:::~:::::::::::~:::::::~:::~:::~:::~::::~:::~::2}}}}}}}1]. ",
-" ][1}~:~:~:::::::::::~::~:~::::::::::~::::::::::::~:~:::::~::~:::::::~:::~:::::::::~:::::2}}}}}}2=. ",
-" 3[}}'::::::~:~::~:::::::::::::::~::::::~::~:~:~:::::~::~::::::~:~::::::::::::~:::::::~:~:2}}}}}1=. ",
-" 312}':::~:::::::::~::~::::~:~:::::~:::::::::::::::::::::::~:::::::::~:~::~:~:::~:::~::::::}}}}}2}. ",
-" 3}}}'~:::::::~:::::::::~::::::::::::~::~:~::::~:~:::::~:::::::~::~::::::::::::::~::::::~:~:}}}}1[. ",
-" 31}}1::~::~:::~:~::~::::::::~:~:~:::::::::::~:::::~:~::~:~:~::::::~::~:~::~::~:::::::~:::::~}}}22. ",
-" (~}}2:::::::::::::::::::~:~:::::::::~::::~:::::~:::::::::::::::~::::::::::::::::~:~:::::::::~}}11. ",
-" 3'}}2::~::~:~::::~::~:~:::::::~::~::::~::::::::::~::::~:::~:~:::~:::::~::~::::~::::::::~:::::~2'1. ",
-" 3~}}}::::::::::~::::::::::::~:::::::~:::~::~::~::::~:::::::::::::::~:::::::~::::::~:~::::~::::::~. ",
-" (:}}}~:~:::::~::::~:::~::~:::::~:::::::::::::::::::::~:~:::~:~::~::::::~::::::::~:::::~::::~::~::. ",
-" (:}}}~:::~:~:::~::::~::::::::::::~::~::~::~::~:~::~::::::::::::::::~:~::~::~:~:::::~::::~::::::::. ",
-" (:}}}':::::::::::::::::~::~:~:::::::::::::::::::::::~::~:~::~:~:~:::::::::::::::::::::::::~:::::~/ ",
-" (:}}}2:~:::~:::~:~::~:::::::::~::~::~::~::~:::~::~::::::::::::::::~::~::::~::~::~:::~::~::::~:~::. ",
-" (:1}}}::::::~::::::::~::~:::::::::::::::::::~::::::~:::~::~::::::::::::~::::::::::~::::::~::::::~. ",
-" (:2}}}~:~::::::~::~:::::::~:~:~::~::~:~::~::::::~:::~:::::::~:~::~::~::::~::~::~::::::~::::::~:::. ",
-" ('1}}}~:::~:::::::::~:~:::::::::::::::::::::::~:::::::~::::::::::::::::::::::::::~::~:::~::::::~1. ",
-" (11}}}2:~:::~:~::~::::::::::::~::~::~:~::~:~:::::~:::::::~:::~::~::~:~::~::~::~::::::::::~::~:::2. ",
-" (}~}}}}::::::::::::::~:~:~:::::::::::::::::::::::::~:~:::::~::::::::::::::::::::~::::~::::::::::[. ",
-" @[~}}}}~~::~:::~::~::::::::~::~::~::::~::::~:~::~:::::::~::::~::~:::~::~::~::~::::~::::::~::~:::=. ",
-" (!~}}}}1:::::~:::::::::~:::::::::::~::::~:::::::::~:::~:::::::::::~::::::::::::~::::~::~::::::~:]. ",
-" @]:2[}}}::~::::~::~:~::::::~::~::~::~:::::::~::~:::~::::::~::::~::::::~::~::~::::::::::::::~::::(. ",
-" @3:}}}}}1:::~::::~:::::~:::::::::::::::~::~::::::::::~::~:::~:::::::~:::::::::~::~:~:::::~:::::~@ ",
-" @:1}}}}2:::::~::::::~:::~:~::~::~::~:::::::~:::~::::::::::::::~:~::::::~::~::::::::~:~:::::~::~. ",
-" @2~}}}}}~~::::::~::::::::::::::::::::~:::::::~:::~:~::::~:~::::::::::~::::::~::~:::::::::::::~[. ",
-" /!:}[}}}2:~::~::::~:~:~:::~::~:::~:::::~:::::::::::::~:::::::~::~:~::::::~:::::::::::~:~::~:::]. ",
-" @3:}}}}}}~:::::~::::::::::::::::::::~::::~:~::~::::::::::::~:::::::::::~:::~::~::~::::::::::::@. ",
-" @:1}}}}}2:~::::~::::::~::~::~:~:~:::::::::::::~:~::~:~:~::::::~::~:~:::::::::::::~:::~::~:~:~. ",
-" /}~}}}}}}1:::::::~:~::::::::::::::~::~:::~::::::::::::::::::~::::::::::~:::~::~::::~::::::::!. ",
-" /]~}}}}}}2~~::~:::::::~::~::~::~::::::~::::~:::~::~::::~:~::::~:::~:~:::~::::::::::::~::::~:(. ",
-" @:1}[}}}}2:::::~::~:::::::::::::::~:::::::::~::::::~:::::::::::~:::::::::~::::~:::::::~:::'/ ",
-" /[~}}}}}}}~~:::::::::~::~::~:~:~::::::~::~::::::~::::~:::~:::::::::~::~::::~::::~:::::::::=. ",
-" /3:}}}}}}}}~::~::::::::::::::::::~::~:::::::::~::::::::~:::~:~:::~::::::~::::~::::~:~::~:~@. ",
-" /~1}}[}}}}}~::::~:~:~::~:::~:::::::::~::~:~:::::~::~:::::::::~::::::~:::::::::::::::::::2. ",
-" /<:}}}}}}}}2~:~:::::::::::::~::~:::::::::::::::::::::~::~:::::::::~:::~::~:~::~:::~::~::3. ",
-" /~1}2[}}}}}}:::::::~::~:~:::::::~::~::~::~:~::~::~::::::~:::~:~:::::::::::::::~:::::::1. ",
-" /=~}}}}}}}}}}~::::::::::::~:~::::::::::::::::::::::~::::::~::::::::~::~::::~::::~::~::3. ",
-" /@~1}}}}}}}}}}~:~::~::~:::::::::~::~::~:::~::~::~:::~:::::::::~:~:::::::~::::::::::::1. ",
-" /<:}}[}}}}}}}}~:::::::~::~::~::::::::::~:::::::::::::~:~:::~:::::~::~::::~::~:~::~::3. ",
-" /1'}}}}[}}}}}}1~:~::::::::::::::~::~::::~::~::~::::::::~:::::~::::::::::::::::::::}. ",
-" /3:}}}}}}}}}}}}2~::::~:~::~::~::::::::::::::::::~:~::::::::::::~::~::~:~::~:::~::~@. ",
-" /[~}}}}}[}}}}}}}1~~:::::::::::~::~::~::::~::~:::::~:::::~::~::::::::::::::~:::::!. ",
-" /@~1}}}}}}}}}}}}}21:~:::~:::::::::::::~:::::::~:::::~:~::::::~::~::~:::~::::~::1/. ",
-" /3:}}}}}}}[}}}}}}}}'~::::~::~::~::~::::~::~::::::::::::::~:::::::::~:::::::::~(. ",
-" /[:}}}}}}}}}}}}}}}}}2':~:::::::::::~:::::::~::~::~:::~::::~::~:::::::::~::::<. ",
-" //1~}}}}}}}}}}}}}}}}}}}1':~::~::~:::::::~:::::::::~:::::::::::~:::~:~::::~:}.. ",
-" /@~'}}}}}[}}}}}}}}}}}}}}}21~~::::~::~::::~::~::::::~::~:~::::::~:::::::::'@. ",
-" /(:1}}}}}}}}}}}}}}}}}}}}}}}}}211~~~:::::::::~:::::::::::~::~::::::~:~::~@. ",
-" /3:1}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}22'~::::~:~::~:::::::::::~::::::~3. ",
-" /]:'}}}}}}[}}[}}}}}}}}}}}}}}}}}}}}}}}}}}}1~:::::::~:::~:::~::::::::~]. ",
-" /<:'}}}}}}}}}}}[}}[}}}}}}}}}}}}}}[}}}}}}}}2~:~:::::~:::~:::~:~:~::]. ",
-" /<:~}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}}}2:::~::::::::::::::::]. ",
-" .3::1}}}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}}}}}}}}~::::~::~:~:::::~:3. ",
-" /(~:'}}}}}}}}}}}}}}}}}}}}}}}}}}}}}[}}}}}}}}}~~::::::::~:~::~(. ",
-" .@2:~1}[}}}}}[}}}}}}}}}}}}}}}}}}}}}}[}}}}}}}:~::~::::::::1@. ",
-" ./!::~2}[}}}}}[}}}}}}}}}[}}}}}}}}}}}}}}}}}}2::::~::~:::[/. ",
-" ./3~::~2}}}}}}}}}}}}}}}}}}}[}}}}}}}}}[}}}}}~::::::::~].. ",
-" //[:::'2}}}}}}}[}}}}}}}}}}}}}}}}}}}}}}}}}~~::~:~:}@. ",
-" ./(1:::~1}}}}}}}}}}}}}}}}}}}[}}}}}}}}}}}~:::::'3.. ",
-" ./31:::~1}}}}}}}}}[}}}}}}}}}}}}}}}}}}}~~::~=/. ",
-" ./32::::~12}}[}}}}}}}}}}}}}}[}}}}}}1::~</.. ",
-" ./([::::~:~'2}}}}[}}}}}}}}}}[}}}':2]/.. ",
-" ../3}::::::~~'122}}}}}}}}}2211<@.. ",
-" ../(<}~::::::~:~~'~~~~1!]@... ",
-" ....@(3<=[[[[[<]3@/.... ",
-" ............. ",
-" ",
-" ",
-" "};
diff --git a/perl-install/pixmaps/mouse_left.xpm b/perl-install/pixmaps/mouse_left.xpm
deleted file mode 100644
index 13fce0362..000000000
--- a/perl-install/pixmaps/mouse_left.xpm
+++ /dev/null
@@ -1,142 +0,0 @@
-/* XPM */
-static char * mouse_left_xpm[] = {
-"59 91 48 1",
-" c None",
-". c #AFB0CD",
-"+ c #A7A9C8",
-"@ c #9FA1C0",
-"# c #9A9ABE",
-"$ c #848CAA",
-"% c #697392",
-"& c #7B84A1",
-"* c #122450",
-"= c #757C94",
-"- c #BABEDA",
-"; c #4D283C",
-"> c #B52E19",
-", c #5C2937",
-"' c #C42F14",
-") c #FF3300",
-"! c #D3300F",
-"~ c #302646",
-"{ c #4A5778",
-"] c #7A2B2D",
-"^ c #21254B",
-"/ c #892C28",
-"( c #E1310A",
-"_ c #FF4000",
-": c #FF6000",
-"< c #FF7300",
-"[ c #FF7900",
-"} c #972C23",
-"| c #FF5900",
-"1 c #FF8000",
-"2 c #FF9900",
-"3 c #FF4D00",
-"4 c #3E2741",
-"5 c #FF8C00",
-"6 c #FF9300",
-"7 c #3E4862",
-"8 c #6B2A32",
-"9 c #F03205",
-"0 c #FF5300",
-"a c #FF3900",
-"b c #FF4600",
-"c c #FF8600",
-"d c #FF6600",
-"e c #5C6888",
-"f c #FF6C00",
-"g c #A62D1E",
-"h c #11244D",
-"i c #253359",
-" .+",
-" .++@@",
-" .++#$%&",
-" .***$=$@--",
-" .******&---.",
-" .****;>,**--##",
-" .****;'))!**=-@#",
-" ****;')))))~*{-.#",
-" .***~')))))))]**--#",
-" .**^/)))))))))>**$-.",
-" .***;()))_:<[_))(**=-.",
-" .**^})))|122223)))^*{--",
-" ***4!))|5222226))));*7--",
-" .***89)052222222|))))]**--",
-" .***})_1222222221)))))/**+.",
-" .**^')|6222222226a)))))'**#-",
-" .**~!a<2222222226b))))))'**=-",
-" +**49bc2222222222|))))))))**%-",
-" +**49b62222222222d)))))))))**e.",
-" +**49|22222222222<))))))))));*7-",
-" +**49|22222222222<)))))))))));*7-",
-" +**49|22222222222ca))))))))))),**-",
-" +**49|22222222222ca))))))))))))/**-",
-" +**49|22222222222ca)))))))))))))/**-",
-" +**^(b22222222222ca))))))))))))))}**-",
-" **^!b622222222226b)))))))))))))))'**#",
-" ***>a522222222226b))))))))))))))))'**#",
-" +**})122222222226b)))))))))))))))))'**#",
-" @**8)f22222222226b))))))))))))))))))(**$",
-" @**49|22222222226b))))))))))))))))))))**$",
-" **^!_62222222226b)))))))))))))))))))))**%",
-" @**>)c2222222226b))))))))))))))))))))))**e",
-" @**])d22222222220)))))))))))))))))))))))**%",
-" @**4932222222222|))))))))))))))))))))))))**e",
-" ***!a5222222222|)))))))))))))))))))))))))4*%",
-" @**/)f222222222|))))))))))))))))))))))))));*e",
-" @**;)3222222222|)))))))))))))))))))))))))));*{",
-" **^()c22222222|))))))))))))))))))))))))))));*7",
-" #**/)d22222222|)))))))))))))))))))))))))))));*7",
-" #**4)_62222222|))))))))))))))))))))))))))))));*7",
-" #**!)[2222222:)))))))))))))))))))))))))))))));*7",
-" @**])32222222<))))))))))))))))))))))))))))))));*7",
-" **^9)5222222<)))))))))))))))))))))))))))))))));*7",
-" #**g)|222222<))))))))))))))))))))))))))))))))));*7",
-" #**;)a622222<)))))))))))))))))))))))))))))))))));*7",
-" #**')d22222[))))))))))))))))))))))))))))))))))));*7",
-" #**8)a62222ca))))))))))))))))))))))))))))))))))));*7",
-" $*^()f2222ca)))))))))))))))))))))))))))))))))))));*7",
-" #**/)_22225a))))))))))))))))))))))))))))))))))))));*7",
-" **^9)<2226b)))))))))))))))))))))))))))))))))))))));*7",
-" #**/)_2226b))))))))))))))))))))))))))))))))))))))));*{",
-" **~))<2220)))))))))))))))))))))))))))))))))))))))));*7",
-" #**g)a222|))))))))))))))))))))))))))))))))))))))))));*7",
-" **~))d22f)))))))))))))))))))))))))))))))))))))))))))4*e",
-" #**g)a62[))))))))))))))))))))))))))))))))))))))))))))**%",
-" **~)):2ca))))))))))))))))))))))))))))))))))))))))))))**%",
-" #**g))56b)))))))))))))))))))))))))))))))))))))))))))))**%",
-" $*^))|20))))))))))))))))))))))))))))))))))))))))))))))**%",
-" $**/))1f))))))))))))))))))))))))))))))))))))))))))))))9**=",
-" $*^9)bc)))))))))))))))))))))))))))))))))))))))))))))))'**#",
-"$**/))<b)))))))))))))))))))))))))))))))))))))))))))))))'**$",
-"$**()a:))))))))))))))))))))))))))))))))))))))))))))))))'**#",
-"**8))|_))))))))))))))))))))))))))))))))))))))))))))))))}**#",
-"**!)):)))))))))))))))))))))))))))))))))))))))))))))))))/**-",
-"*4))0_)))))))))))))))))))))))))))))))))))))))))))))))))/**-",
-"*;))3)))))))))))))))))))))))))))))))))))))))))))))))))),*h-",
-"*4)))))))))))))))))))))))))))))))))))))))))))))))))))));*7-",
-"**)))))))))))))))))))))))))))))))))))))))))))))))))))))4*7-",
-"**>))))))))))))))))))))))))))))))))))))))))))))))))))))**{-",
-"**8))))))))))))))))))))))))))))))))))))))))))))))))))))**e-",
-"h*^9))))))))))))))))))))))))))))))))))))))))))))))))))'**%-",
-"7**/))))))))))))))))))))))))))))))))))))))))))))))))))'**$-",
-"#h**!)))))))))))))))))))))))))))))))))))))))))))))))))/**#-",
-"-7**49))))))))))))))))))))))))))))))))))))))))))))))))]**.-",
-"-+i**8))))))))))))))))))))))))))))))))))))))))))))))));*h--",
-"--$h**8)))))))))))))))))))))))))))))))))))))))))))))))~*7--",
-"---=h**89)))))))))))))))))))))))))))))))))))))))))))))**{.-",
-".---eh**4()))))))))))))))))))))))))))))))))))))))))))'**%--",
-"-----&h**^}))))))))))))))))))))))))))))))))))))))))))g**$--",
-"-.--.-#i***;!))))))))))))))))))))))))))))))))))))))))/**#--",
-"------..{****8())))))))))))))))))))))))))))))))))))));*h--.",
-"-.-------$i****8!))))))))))))))))))))))))))))))))))))^*7---",
-"---.------.%i****4g9))))))))))))))))))))))))))))))))(**{---",
-"------------.%i****^8>))))))))))))))))))))))))))))))>**&.--",
-".---.--.------.&i*****^,g())))))))))))))))))))))))))]**+---",
-"-.------.--.-----@{h******~8g())))))))))))))))))))))4*i----",
-"-----.-------.------${i*******~,/'())))))))))))))))9**{--.-",
-"--.-----.-----.--------@%7h********^;8/'!))))))))))g**$----",
-"-----------.----.----------#%{h***********^;,//>'');**-.---",
-"----.---.----------.-.-.--.----.$%77h****************h{e%ee",
-"-.------------.-------------.------.-##%e77h*********hhhhhh"};
diff --git a/perl-install/pixmaps/mouse_middle.xpm b/perl-install/pixmaps/mouse_middle.xpm
deleted file mode 100644
index 1724c9190..000000000
--- a/perl-install/pixmaps/mouse_middle.xpm
+++ /dev/null
@@ -1,89 +0,0 @@
-/* XPM */
-static char * mouse_middle_xpm[] = {
-"13 62 24 1",
-" c None",
-". c #999ABD",
-"+ c #9E9EC1",
-"@ c #FF3310",
-"# c #77819E",
-"$ c #FF330C",
-"% c #FF330B",
-"& c #FF3300",
-"* c #FF3308",
-"= c #FF3307",
-"- c #142753",
-"; c #384365",
-"> c #6F7892",
-", c #0F1C3D",
-"' c #FF3304",
-") c #FF3303",
-"! c #606C8C",
-"~ c #525E81",
-"{ c #6D6E91",
-"] c #898BA4",
-"^ c #A3A4C3",
-"/ c #AEB2CF",
-"( c #A9ADCA",
-"_ c #BABEDA",
-".+@@@@@@@@@..",
-"##$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"#-$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"#-$$$$$$$$%##",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&$$$$$$$$%&&",
-"#;$$$$$$$$%;#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"##********=.>",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&$$$$$$$$%&&",
-"-#********=,#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"##$$$$$$$$%&&",
-"&&'''''''').#",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"!!@@@@@@@@@~#",
-"&&'''''''')&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"{!@@@@@@@@@~]",
-"&&'''''''')&&",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"!!@@@@@@@@@{.",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!{@@@@@@@@@!^",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-".]@@@@@@@@@./",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!!@@@@@@@@@!(",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&'''''''')&&",
-"!!$$$$$$$$%!^",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"!!@@@@@@@@@!+",
-"&&&&&&&&&&&&&",
-"&&&&&&&&&&&&&",
-"&&********=&&",
-"/_@@@@@@@@@/_",
-"__@@@@@@@@@__"};
diff --git a/perl-install/pixmaps/mouse_right.xpm b/perl-install/pixmaps/mouse_right.xpm
deleted file mode 100644
index 97c6824cb..000000000
--- a/perl-install/pixmaps/mouse_right.xpm
+++ /dev/null
@@ -1,143 +0,0 @@
-/* XPM */
-static char * mouse_right_xpm[] = {
-"61 91 49 1",
-" c None",
-". c #7B84A1",
-"+ c #697392",
-"@ c #757C94",
-"# c #848CAA",
-"$ c #5C6888",
-"% c #BABEDA",
-"& c #9FA1C0",
-"* c #4A5778",
-"= c #122450",
-"- c #AFB0CD",
-"; c #9A9ABE",
-"> c #A7A9C8",
-", c #253359",
-"' c #4D283C",
-") c #C42F14",
-"! c #B52E19",
-"~ c #FF3300",
-"{ c #E1310A",
-"] c #6B2A32",
-"^ c #21254B",
-"/ c #5C2937",
-"( c #3E2741",
-"_ c #972C23",
-": c #3E4862",
-"< c #F03205",
-"[ c #A62D1E",
-"} c #7A2B2D",
-"| c #892C28",
-"1 c #D3300F",
-"2 c #11244D",
-"3 c #0E1A3A",
-"4 c #FF5300",
-"5 c #FF4000",
-"6 c #FF6600",
-"7 c #FF3900",
-"8 c #302646",
-"9 c #FF7300",
-"0 c #FF8000",
-"a c #FF9300",
-"b c #FF4600",
-"c c #FF8600",
-"d c #FF7900",
-"e c #FF9900",
-"f c #FF6000",
-"g c #FF4D00",
-"h c #FF8C00",
-"i c #FF6C00",
-"j c #FF5900",
-"... ",
-"+++@@@ ",
-"#@$$$++++ ",
-"%%%&.*===++ ",
-"-%%%.======$$ ",
-";>%%,=')'====$$ ",
-";;-;==!~~{]====*$ ",
-";;;*=^~~~~~{/====** ",
-";;;==]~~~~~~~)(===*** ",
-";;#==_~~~~~~~~~_^===*: ",
-";;@==)~~~~~~~~~~</===:* ",
-";;+==~~~~~~~~~~~~~[^==::: ",
-";>:=(~~~~~~~~~~~~~~{(===:: ",
-";%==/~~~~~~~~~~~~~~~~}===,: ",
-";%==|~~~~~~~~~~~~~~~~~[^==:, ",
-">;==_~~~~~~~~~~~~~~~~~~1^==:,, ",
-"-;==)~~~~~~~~~~~~~~~~~~~{(==:,, ",
-"%+==1~~~~~~~~~~~~~~~~~~~~<(==,,, ",
-"%$==~~~~~~~~~~~~~~~~~~~~~~<]==:,, ",
-"%*==~~~~~~~~~~~~~~~~~~~~~~~~]==,,2 ",
-"%:='~~~~~~~~~~~~~~~~~~~~~~~~~]==,,2 ",
-"%:='~~~~~~~~~~~~~~~~~~~~~~~~~~]==,22 ",
-"%==/~~~~~~~~~~~~~~~~~~~~~~~~~~~'==,22 ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~<(==,22 ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~<(==,2 ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1^==22 ",
-"&==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1===22 ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~[===22 ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~}==222 ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'==22 ",
-";==<~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<^==32 ",
-"#==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~)===22 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|==222 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~'==22 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{^==22 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~45~~~~[==232 ",
-"$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~67~~~~/==22 ",
-"+=8~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~79~~~~<^==32 ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~46~~~~[==222 ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~04~~~~'==23 ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5ab~~~{^==22 ",
-"+='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6c7~~~|==232 ",
-"*='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7ad~~~~8==23 ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6ef~~~)==222 ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7eeg~~~/==23 ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~9ea7~~{===22 ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~bee0~~~|==23 ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ceef~~<^==22 ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~feeeb~~_==232 ",
-":='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5eeec7~~8==23 ",
-"$='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~heeei~~[==223 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ieeeeg~~8==32 ",
-"$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeh7~!==232 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~beeeeei~~'==23 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~eeeeeeg~)==223 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~aeeeeeh~~(==32 ",
-"+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeee6~[==233 ",
-";==1~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeea5~8==22 ",
-"#==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeee9~[==23 ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeee5~8=223 ",
-";==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~aeeeeeeee9~_==22 ",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~eeeeeeeeee5<^=233",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~geeeeeeeeee9~}==23",
-"%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~feeeeeeeeeea7{==22",
-"%:=/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeeeeeej~/=22",
-"-:='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5eeeeeeeeeeee9~]=23",
-"%:=(~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeee0~'=22",
-"%+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~7aeeeeeeeeeeeee~^=22",
-"%+==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeec1==22",
-"%#==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~5aeeeeeeeeeeeee6}==22",
-"%;==)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~0eeeeeeeeeeeeeh7^=22,",
-"%>==_~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeeeb_==22@",
-"%%==|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeeej{^==2,%",
-"%%,=/~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeeej~'==22#%",
-"%%:='~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~jeeeeeeeeeeeeea4~]==22$%%",
-"%%$==~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~6eeeeeeeeeeeeec5~]==22,-%-",
-"%%@=={~~~~~~~~~~~~~~~~~~~~~~~~~~~7deeeeeeeeeeeea6~~]==22:-%-;",
-"%%;==)~~~~~~~~~~~~~~~~~~~~~~~~~~gheeeeeeeeeeee95~<'==22:-%-;;",
-"%->==|~~~~~~~~~~~~~~~~~~~~~~~~79eeeeeeeeeeee95~~!^==22*-%&;;;",
-"%%%==]~~~~~~~~~~~~~~~~~~~~~~76aeeeeeeeeeea65~~{'===22+%-&;;;;",
-"%%%:=(~~~~~~~~~~~~~~~~~~~~76aeeeeeeeeeed4~~~{]====2,;--;;;;;;",
-"%-%$==~~~~~~~~~~~~~~~~~~56aeeeeeeeeedj7~~~{]====2,+%-&;;;;;;;",
-"%%%@==)~~~~~~~~~~~~~~~4deeeeeeeeci4~~~~~['====22*>%-&;;;;;;#;",
-"%%%&==_~~~~~~~~~~~~49aeeeeee0i47~~~~~!]^====22*>%-;;;;;;;;;;;",
-"%%%%==]~~~~~~~~7j9aeeee0ifg~~~~~~<[]^=====2,+%%-&;;;;;;;;;;;;",
-"%-%%:=8~~~~74ice006fg7~~~~~~~{!}(======22$#%%-&;;;;;;;#;;;;;;",
-"%%%%+==1~~bggb~~~~~~~~~~<)|/8=======2,*.-%%>&;;;;;;;;;;;;;;;#",
-"%-%%&==_~~~~~~~~~~1)|}'^========22:$;%%%%-;;;;;;;;#;;;;;;;;;;",
-"%%%%%,=(~1)!||/'8===========22:+#-%%%%-&;;;;;;;;;;;;;;;;;;;;;",
-";#+$+:================23,:+.&%%%%%%-&;;;;;;;;;;;;;;;;;;#;;;;;",
-"222222=========22,:*$.;-%%%%%%%%>&&;;;;;;;;;;;;;;;;#;;;;;;;;;"};
diff --git a/perl-install/pixmaps/network.png b/perl-install/pixmaps/network.png
deleted file mode 100644
index aee48fb09..000000000
--- a/perl-install/pixmaps/network.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/partition.png b/perl-install/pixmaps/partition.png
deleted file mode 100644
index 982fb7681..000000000
--- a/perl-install/pixmaps/partition.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/quit.png b/perl-install/pixmaps/quit.png
deleted file mode 100644
index 3aa7db5e0..000000000
--- a/perl-install/pixmaps/quit.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/rootpasswd.png b/perl-install/pixmaps/rootpasswd.png
deleted file mode 100644
index af153abb6..000000000
--- a/perl-install/pixmaps/rootpasswd.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/security.png b/perl-install/pixmaps/security.png
deleted file mode 100644
index af153abb6..000000000
--- a/perl-install/pixmaps/security.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/services.png b/perl-install/pixmaps/services.png
deleted file mode 100644
index 7cd8b06d6..000000000
--- a/perl-install/pixmaps/services.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/summary.png b/perl-install/pixmaps/summary.png
deleted file mode 100644
index 79a1e0f4f..000000000
--- a/perl-install/pixmaps/summary.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/user.png b/perl-install/pixmaps/user.png
deleted file mode 100644
index a9f7d0eb6..000000000
--- a/perl-install/pixmaps/user.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pixmaps/warning.png b/perl-install/pixmaps/warning.png
deleted file mode 100644
index d6f2306db..000000000
--- a/perl-install/pixmaps/warning.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
deleted file mode 100644
index 932256f19..000000000
--- a/perl-install/pkgs.pm
+++ /dev/null
@@ -1,1691 +0,0 @@
-package pkgs; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(*LOG %preferred $limitMinTrans %compssListDesc);
-
-use MDK::Common::System;
-use URPM;
-use URPM::Resolve;
-use common;
-use install_any;
-use run_program;
-use detect_devices;
-use log;
-use fs;
-use loopback;
-use c;
-
-
-
-my @preferred = qw(perl-GTK postfix gcc gcc-cpp gcc-c++ proftpd ghostscript-X vim-minimal kernel db1 db2 ispell-en Bastille-Curses-module nautilus libxpm4 zlib1 libncurses5 hardrake);
-@preferred{@preferred} = ();
-
-#- lower bound on the left ( aka 90 means [90-100[ )
-%compssListDesc = (
- 5 => __("must have"),
- 4 => __("important"),
- 3 => __("very nice"),
- 2 => __("nice"),
- 1 => __("maybe"),
-);
-
-#- constant for small transaction.
-$limitMinTrans = 8;
-
-##- constant for package accessor (via table).
-#my $FILE = 0;
-#my $FLAGS = 1;
-#my $SIZE_DEPS = 2;
-#my $MEDIUM = 3;
-#my $PROVIDES = 4;
-#my $VALUES = 5;
-#my $HEADER = 6;
-#my $INSTALLED_CUMUL_SIZE = 7;
-#my $EPOCH = 8;
-#
-##- constant for packing flags, see below.
-#my $PKGS_SELECTED = 0x00ffffff;
-#my $PKGS_FORCE = 0x01000000;
-#my $PKGS_INSTALLED = 0x02000000;
-#my $PKGS_BASE = 0x04000000;
-#my $PKGS_UPGRADE = 0x20000000;
-
-#- package to ignore, typically in Application CD.
-my %ignoreBadPkg = (
- 'civctp-demo' => 1,
- 'eus-demo' => 1,
- 'myth2-demo' => 1,
- 'heretic2-demo' => 1,
- 'heroes3-demo' => 1,
- 'rt2-demo' => 1,
- );
-
-#- basic methods for extracting informations about packages.
-#- to save memory, (name, version, release) are no more stored, they
-#- are directly generated from (file).
-#- all flags are grouped together into (flags), these includes the
-#- following flags : selected, force, installed, base, skip.
-#- size and deps are grouped to save memory too and make a much
-#- simpler and faster depslist reader, this gets (sizeDeps).
-#sub packageHeaderFile { $_[0] ? $_[0]->[$FILE]
-# : die "invalid package from\n" . backtrace() }
-#sub packageName { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*)-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
-# : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-#sub packageVersion { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-([^:\-\s]+)-[^:\-\s]+\.[^:\.\-\s]*(?::.*)?/ ? $1
-# : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-#sub packageRelease { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-([^:\-\s]+)\.[^:\.\-\s]*(?::.*)?/ ? $1
-# : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-#sub packageArch { $_[0] && $_[0]->[$FILE] =~ /^[^:\s]*-[^:\-\s]+-[^:\-\s]+\.([^:\.\-\s]*)(?::.*)?/ ? $1
-# : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-#sub packageFile { $_[0] && $_[0]->[$FILE] =~ /^([^:\s]*-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*)(?::(.*))?/ ? ($2 || $1) . ".rpm"
-# : die "invalid file `" . ($_[0] && $_[0]->[$FILE]) . "'\n" . backtrace() }
-#sub packageEpoch { $_[0] && $_[0]->[$EPOCH] || 0 }
-#
-#sub packageSize { to_int($_[0] && ($_[0]->[$SIZE_DEPS] - ($_[0]->[$INSTALLED_CUMUL_SIZE] || 0))) }
-#sub packageDepsId { split ' ', ($_[0] && ($_[0]->[$SIZE_DEPS] =~ /^\d*\s*(.*)/)[0]) }
-#
-#sub packageFlagSelected { $_[0] && $_[0]->[$FLAGS] & $PKGS_SELECTED }
-#sub packageFlagForce { $_[0] && $_[0]->[$FLAGS] & $PKGS_FORCE }
-#sub packageFlagInstalled { $_[0] && $_[0]->[$FLAGS] & $PKGS_INSTALLED }
-#sub packageFlagBase { $_[0] && $_[0]->[$FLAGS] & $PKGS_BASE }
-#sub packageFlagUpgrade { $_[0] && $_[0]->[$FLAGS] & $PKGS_UPGRADE }
-#
-#sub packageSetFlagSelected { $_[0]->[$FLAGS] &= ~$PKGS_SELECTED; $_[0]->[$FLAGS] |= $_[1] & $PKGS_SELECTED; }
-#
-#sub packageSetFlagForce { $_[0] or die "invalid package from\n" . backtrace();
-# $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_FORCE) : ($_[0]->[$FLAGS] &= ~$PKGS_FORCE); }
-#sub packageSetFlagInstalled { $_[0] or die "invalid package from\n" . backtrace();
-# $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_INSTALLED) : ($_[0]->[$FLAGS] &= ~$PKGS_INSTALLED); }
-#sub packageSetFlagBase { $_[0] or die "invalid package from\n" . backtrace();
-# $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_BASE) : ($_[0]->[$FLAGS] &= ~$PKGS_BASE); }
-#sub packageSetFlagUpgrade { $_[0] or die "invalid package from\n" . backtrace();
-# $_[1] ? ($_[0]->[$FLAGS] |= $PKGS_UPGRADE) : ($_[0]->[$FLAGS] &= ~$PKGS_UPGRADE); }
-#
-sub packageMedium { my ($packages, $p) = @_; $p or die "invalid package from\n" . backtrace();
- foreach (values %{$packages->{mediums}}) {
- $p->id >= $_->{start} && $p->id <= $_->{end} and return $_;
- }
- return }
-
-#sub packageProvides { $_[1] or die "invalid package from\n" . backtrace();
-# map { $_[0]->{depslist}[$_] || die "unkown package id $_" } unpack "s*", $_[1]->[$PROVIDES] }
-#
-#sub packageRate { substr($_[0] && $_[0]->[$VALUES], 0, 1) }
-#sub packageRateRFlags { my ($rate, @flags) = split "\t", $_[0] && $_[0]->[$VALUES]; ($rate, @flags) }
-#sub packageSetRateRFlags { my ($pkg, $rate, @flags) = @_; $pkg or die "invalid package from\n" . backtrace();
-# $pkg->[$VALUES] = join("\t", $rate, @flags) }
-#
-#sub packageHeader { $_[0] && $_[0]->[$HEADER] }
-#sub packageFreeHeader { $_[0] && c::headerFree(delete $_[0]->[$HEADER]) }
-
-sub packageSelectedOrInstalled { $_[0] && ($_[0]->flag_selected || $_[0]->flag_installed) }
-
-#sub packageId {
-# my ($packages, $pkg) = @_;
-# my $i = 0;
-# foreach (@{$packages->{depslist}}) { return $i if $pkg == $packages->{depslist}[$i]; $i++ }
-# return;
-#}
-
-sub cleanHeaders {
- my ($prefix) = @_;
- rm_rf("$prefix/tmp/headers") if -e "$prefix/tmp/headers";
-}
-
-#- get all headers from an hdlist file.
-sub extractHeaders {
- my ($prefix, $pkgs, $media) = @_;
- my %medium2pkgs;
-
- cleanHeaders($prefix);
-
- foreach (@$pkgs) {
- foreach my $medium (values %$media) {
- $_->id >= $medium->{start} && $_->id <= $medium->{end} or next;
- push @{$medium2pkgs{$medium->{medium}} ||= []}, $_;
- }
- }
-
- foreach (keys %medium2pkgs) {
- my $medium = $media->{$_};
-
- eval {
- require packdrake;
- my $packer = new packdrake("/tmp/$medium->{hdlist}", quiet => 1);
- $packer->extract_archive("$prefix/tmp/headers", map { $_->header_filename } @{$medium2pkgs{$_}});
- };
- }
-
- foreach (@$pkgs) {
- my $f = "$prefix/tmp/headers/". $_->header_filename;
- $_->update_header($f) or log::l("unable to open header file $f"), next;
- }
-}
-
-#- TODO BEFORE TODO
-#- size and correction size functions for packages.
-my $B = 1.20873;
-my $C = 4.98663; #- doesn't take hdlist's into account as getAvailableSpace will do it.
-sub correctSize { $B * $_[0] + $C }
-sub invCorrectSize { ($_[0] - $C) / $B }
-
-sub selectedSize {
- my ($packages) = @_;
- my $size = 0;
- foreach (@{$packages->{depslist}}) {
- $_->flag_selected and $size += $_->size;
- }
- $size;
-}
-sub correctedSelectedSize { correctSize(selectedSize($_[0]) / sqr(1024)) }
-
-sub size2time {
- my ($x, $max) = @_;
- my $A = 7e-07;
- my $limit = min($max * 3 / 4, 9e8);
- if ($x < $limit) {
- $A * $x;
- } else {
- $x -= $limit;
- my $B = 6e-16;
- my $C = 15e-07;
- $B * $x ** 2 + $C * $x + $A * $limit;
- }
-}
-
-
-#- searching and grouping methods.
-#- package is a reference to list that contains
-#- a hash to search by name and
-#- a list to search by id.
-sub packageByName {
- my ($packages, $name) = @_;
- #- search package with given name and compatible with current architecture.
- #- take the best one found (most up-to-date).
- my @packages;
- foreach (keys %{$packages->{provides}{$name} || {}}) {
- my $pkg = $packages->{depslist}[$_];
- $pkg->is_arch_compat or next;
- $pkg->name eq $name or next;
- push @packages, $pkg;
- }
- my $best;
- foreach (@packages) {
- if ($best && $best != $_) {
- $_->compare_pkg($best) > 0 and $best = $_;
- } else {
- $best = $_;
- }
- }
- $best or log::l("unknown package `$name'") && undef;
-}
-sub packageById {
- my ($packages, $id) = @_;
- my $pkg = $packages->{depslist}[$id]; #- do not log as id unsupported are still in depslist.
- $pkg->is_arch_compat && $pkg;
-}
-sub packagesOfMedium {
- my ($packages, $medium) = @_;
- $medium->{start} <= $medium->{end} ? @{$packages->{depslist}}[$medium->{start} .. $medium->{end}] : ();
-}
-sub packagesToInstall {
- my ($packages) = @_;
- my @packages;
- foreach (values %{$packages->{mediums}}) {
- $_->{selected} or next;
- log::l("examining packagesToInstall of medium $_->{descr}");
- push @packages, grep { $_->flag_selected } packagesOfMedium($packages, $_);
- }
- log::l("found " .scalar(@packages). " packages to install");
- @packages;
-}
-
-sub allMediums {
- my ($packages) = @_;
- sort { $a <=> $b } keys %{$packages->{mediums}};
-}
-sub mediumDescr {
- my ($packages, $medium) = @_;
- $packages->{mediums}{$medium}{descr};
-}
-
-sub packageRequest {
- my ($packages, $pkg) = @_;
-
- #- check if the same or better version is installed,
- #- do not select in such case.
- $pkg && ($pkg->flag_upgrade || !$pkg->flag_installed) or return;
-
- #- check for medium selection, if the medium has not been
- #- selected, the package cannot be selected.
- foreach (values %{$packages->{mediums}}) {
- !$_->{selected} && $pkg->id >= $_->{start} && $pkg->id <= $_->{end} and return;
- }
-
- return { $pkg->id => 1 };
-}
-
-sub packageCallbackChoices {
- my ($urpm, $db, $state, $choices) = @_;
- my $prefer;
- foreach (@$choices) {
- exists $preferred{$_->name} and $prefer = $_;
- $_->name =~ /kernel-\d/ and $prefer ||= $_;
- }
- $prefer || $choices->[0]; #- first one (for instance).
-}
-
-#- selection, unselection of package.
-sub selectPackage {
- my ($packages, $pkg, $base, $otherOnly) = @_;
-
- #- select package and dependancies, otherOnly may be a reference
- #- to a hash to indicate package that will strictly be selected
- #- when value is true, may be selected when value is false (this
- #- is only used for unselection, not selection)
- my $state = $packages->{state} ||= {};
- $state->{selected} = {};
- $state->{requested} = packageRequest($packages, $pkg) or return;
- $packages->resolve_requested($packages->{rpmdb}, $state, no_flag_update => $otherOnly, clear_state => $otherOnly,
- callback_choices => \&packageCallbackChoices);
-
- if ($base || $otherOnly) {
- foreach (keys %{$state->{selected}}) {
- my $p = $packages->{depslist}[$_] or next;
- #- if base is activated, propagate base flag to all selection.
- $base and $p->set_flag_base;
- $otherOnly and $otherOnly->{$_} = $state->{selected}{$_};
- }
- }
- 1;
-}
-
-sub unselectPackage($$;$) {
- my ($packages, $pkg, $otherOnly) = @_;
-
- #- base package are not unselectable,
- #- and already unselected package are no more unselectable.
- $pkg->flag_base and return;
- $pkg->flag_selected or return;
-
- #- try to unwind selection (requested or required) by keeping
- #- rpmdb is right place.
- #TODO
- if ($otherOnly) {
- $otherOnly->{$pkg->id} = undef;
- } else {
- $pkg->set_flag_requested(0);
- $pkg->set_flag_required(0);
-
- #- clear state.
- my $state = $packages->{state} ||= {};
- $state->{selected} = { $pkg->id };
- $state->{requested} = {};
- $packages->resolve_requested($packages->{rpmdb}, $state, clear_state => 1);
- }
- 1;
-}
-sub togglePackageSelection($$;$) {
- my ($packages, $pkg, $otherOnly) = @_;
- $pkg->flag_selected ? unselectPackage($packages, $pkg, $otherOnly) : selectPackage($packages, $pkg, 0, $otherOnly);
-}
-sub setPackageSelection($$$) {
- my ($packages, $pkg, $value) = @_;
- $value ? selectPackage($packages, $pkg) : unselectPackage($packages, $pkg);
-}
-
-sub unselectAllPackages($) {
- my ($packages) = @_;
- my %selected;
- foreach (@{$packages->{depslist}}) {
- unless ($_->flag_base || $_->flag_installed && $_->flag_selected) {
- #- deselect all packages except base or packages that need to be upgraded.
- $_->set_flag_requested(0);
- $_->set_flag_required(0);
- $selected{$_->id} = undef;
- }
- }
- if (%selected) {
- my $state = $packages->{state} ||= {};
- $state->{selected} = \%selected;
- $state->{requested} = {};
- $packages->resolve_requested($packages->{rpmdb}, $state, clear_state => 1);
- }
-}
-sub unselectAllPackagesIncludingUpgradable($) {
- my ($packages, $removeUpgradeFlag) = @_;
- my %selected;
- foreach (@{$packages->{depslist}}) {
- unless ($_->flag_base) {
- $_->set_flag_requested(0);
- $_->set_flag_required(0);
- $selected{$_->id} = undef;
- }
- }
- if (%selected) {
- my $state = $packages->{state} ||= {};
- $state->{selected} = \%selected;
- $state->{requested} = {};
- $packages->resolve_requested($packages->{rpmdb}, $state, clear_state => 1);
- }
-}
-
-sub psUpdateHdlistsDeps {
- my ($prefix, $method, $packages) = @_;
- my ($good_hdlists_deps, $mediums) = (0, 0);
-
- #- check if current configuration is still up-to-date and do not need to be updated.
- foreach (values %{$packages->{mediums}}) {
- my $hdlistf = "$prefix/var/lib/urpmi/hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
- my $synthesisf = "$prefix/var/lib/urpmi/synthesis.hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
- -s $hdlistf == $_->{hdlist_size} && -s $synthesisf == $_->{synthesis_hdlist_size} and ++$good_hdlists_deps;
- ++$mediums;
- }
- $good_hdlists_deps > 0 && $good_hdlists_deps == $mediums and return; #- nothing to do.
-
- #- at this point, this means partition has problably be reformatted and hdlists should be retrieved.
- install_any::useMedium($install_any::boot_medium);
-
- my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";
-
- #- WARNING: this function should be kept in sync with functions
- #- psUsingHdlists and psUsingHdlist.
- #- it purpose it to update hdlist files on system to install.
-
- #- parse hdlist.list file.
- my $medium = 1;
- foreach (<$listf>) {
- chomp;
- s/\s*#.*$//;
- /^\s*$/ and next;
- m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
- my ($hdlist, $rpmsdir, $descr) = ($1, $2, $3);
-
- #- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
- #- for getting header of package during installation or after by urpmi.
- my $fakemedium = "$descr ($method$medium)";
- my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
- -e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
- install_any::getAndSaveFile("Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
- symlinkf $newf, "/tmp/$hdlist";
- install_any::getAndSaveFile("Mandrake/base/synthesis.$hdlist",
- "$prefix/var/lib/urpmi/synthesis.hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2"));
- ++$medium;
- }
-
- #- this is necessary for urpmi.
- install_any::getAndSaveFile("Mandrake/base/$_", "$prefix/var/lib/urpmi/$_") foreach qw(rpmsrate);
-}
-
-sub psUsingHdlists {
- my ($prefix, $method) = @_;
- my $listf = install_any::getFile('Mandrake/base/hdlists') or die "no hdlists found";
- my $packages = new URPM;
-
- #- add additional fields used by DrakX.
- @{$packages}{qw(count mediums)} = (0, {});
- $packages->{rpmdb} = URPM::DB::open($prefix);
- $packages->{rpmdb} ||= new URPM;
-
- #- parse hdlists file.
- my $medium = 1;
- foreach (<$listf>) {
- chomp;
- s/\s*#.*$//;
- /^\s*$/ and next;
- m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file";
-
- #- make sure the first medium is always selected!
- #- by default select all image.
- psUsingHdlist($prefix, $method, $packages, $1, $medium, $2, $3, 1);
-
- ++$medium;
- }
-
- log::l("psUsingHdlists read " . scalar @{$packages->{depslist}} .
- " headers on " . scalar keys(%{$packages->{mediums}}) . " hdlists");
-
- $packages;
-}
-
-sub psUsingHdlist {
- my ($prefix, $method, $packages, $hdlist, $medium, $rpmsdir, $descr, $selected, $fhdlist) = @_;
- my $fakemedium = "$descr ($method$medium)";
- my ($relocated, $ignored) = (0, 0);
- log::l("trying to read $hdlist for medium $medium");
-
- #- if the medium already exist, use it.
- $packages->{mediums}{$medium} and return $packages->{mediums}{$medium};
-
- my $m = $packages->{mediums}{$medium} = { hdlist => $hdlist,
- method => $method,
- medium => $medium,
- rpmsdir => $rpmsdir, #- where is RPMS directory.
- descr => $descr,
- fakemedium => $fakemedium,
-# min => $packages->{count},
-# max => -1, #- will be updated after reading current hdlist.
- selected => $selected, #- default value is only CD1, it is really the minimal.
- };
-
- #- copy hdlist file directly to $prefix/var/lib/urpmi, this will be used
- #- for getting header of package during installation or after by urpmi.
- my $newf = "$prefix/var/lib/urpmi/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
- -e $newf and do { unlink $newf or die "cannot remove $newf: $!"; };
- install_any::getAndSaveFile($fhdlist || "Mandrake/base/$hdlist", $newf) or die "no $hdlist found";
- $m->{hdlist_size} = -s $newf; #- keep track of size for post-check.
- symlinkf $newf, "/tmp/$hdlist";
-
- #- if $fhdlist is defined, this is preferable not to try to find the associated synthesis.
- my $newsf = "$prefix/var/lib/urpmi/synthesis.hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
- unless ($fhdlist) {
- #- copy existing synthesis file too.
- install_any::getAndSaveFile("Mandrake/base/synthesis.$hdlist", $newsf);
- $m->{synthesis_hdlist_size} = -s $newsf; #- keep track of size for post-check.
- -s $newsf > 0 or unlink $newsf;
- }
-
- #- avoid using more than one medium if Cd is not ejectable.
- #- but keep all medium here so that urpmi has the whole set.
- $method eq 'cdrom' && $medium > 1 && !common::usingRamdisk() and return;
-
- #- parse synthesis (if available) of directly hdlist (with packing).
- if (-s $newsf) {
- ($m->{start}, $m->{end}) = $packages->parse_synthesis($newsf);
- } elsif (-s $newf) {
- ($m->{start}, $m->{end}) = $packages->parse_hdlist($newf, 1);
- } else {
- die "fatal: no hdlist nor synthesis to read for $fakemedium";
- }
- $m->{start} > $m->{end} and die "fatal: nothing read in hdlist or synthesis for $fakemedium";
- log::l("read " . ($m->{end} - $m->{start} + 1) . " packages in $hdlist");
- $m;
-}
-
-#OBSOLETED TODO
-sub getOtherDeps($$) {
- return; #TODO
-# my ($packages, $f) = @_;
-#
-# #- this version of getDeps is customized for handling errors more easily and
-# #- convert reference by name to deps id including closure computation.
-# local $_;
-# while (<$f>) {
-# my ($name, $version, $release, $size, $deps) = /^(\S*)-([^-\s]+)-([^-\s]+)\s+(\d+)\s+(.*)/;
-# my $pkg = $packages->{names}{$name};
-#
-# $pkg or log::l("ignoring package $name-$version-$release in depslist is not in hdlist"), next;
-# $version eq packageVersion($pkg) and $release eq packageRelease($pkg)
-# or log::l("warning package $name-$version-$release in depslist mismatch version or release in hdlist ($version ne ",
-# packageVersion($pkg), " or $release ne ", packageRelease($pkg), ")"), next;
-#
-# my $index = scalar @{$packages->{depslist}};
-# $index >= packageMedium($packages, $pkg)->{min} && $index <= packageMedium($packages, $pkg)->{max}
-# or log::l("ignoring package $name-$version-$release in depslist outside of hdlist indexation");
-#
-# #- here we have to translate referenced deps by name to id.
-# #- this include a closure on deps too.
-# my %closuredeps;
-# @closuredeps{map { packageId($packages, $_), packageDepsId($_) }
-# grep { $_ }
-# map { packageByName($packages, $_) or do { log::l("unknown package $_ in depslist for closure"); undef } }
-# split /\s+/, $deps} = ();
-#
-# $pkg->[$SIZE_DEPS] = join " ", $size, keys %closuredeps;
-#
-# push @{$packages->{depslist}}, $pkg;
-# }
-#
-# #- check for same number of package in depslist and hdlists, avoid being to hard.
-# scalar(keys %{$packages->{names}}) == scalar(@{$packages->{depslist}})
-# or log::l("other depslist has not same package as hdlist file");
-}
-
-#OBSOLETED TODO
-sub getDeps {
- return; #TODO
-# my ($prefix, $packages) = @_;
-#
-# #- this is necessary for urpmi.
-# install_any::getAndSaveFile('Mandrake/base/depslist.ordered', "$prefix/var/lib/urpmi/depslist.ordered");
-# install_any::getAndSaveFile('Mandrake/base/provides', "$prefix/var/lib/urpmi/provides");
-#
-# #- beware of heavily mismatching depslist.ordered file against hdlist files.
-# my $mismatch = 0;
-#
-# #- count the number of packages in deplist that are also in hdlist
-# my $nb_deplist = 0;
-#
-# #- update dependencies list, provides attributes are updated later
-# #- cross reference to be resolved on id (think of loop requires)
-# #- provides should be updated after base flag has been set to save
-# #- memory.
-# local *F; open F, "$prefix/var/lib/urpmi/depslist.ordered" or die "can't find dependancies list";
-# local $_;
-# while (<F>) {
-# my ($name, $version, $release, $arch, $epoch, $sizeDeps) =
-# /^([^:\s]*)-([^:\-\s]+)-([^:\-\s]+)\.([^:\.\-\s]*)(?::(\d+)\S*)?\s+(.*)/;
-# my $pkg = $packages->{names}{$name};
-#
-# #- these verification are necessary in case of error, but are no more fatal as
-# #- in case of only one medium taken into account during install, there should be
-# #- silent warning for package which are unknown at this point.
-# $pkg or
-# log::l("ignoring $name-$version-$release.$arch in depslist is not in hdlist");
-# $pkg && $version ne packageVersion($pkg) and
-# log::l("ignoring $name-$version-$release.$arch in depslist mismatch version in hdlist"), $pkg = undef;
-# $pkg && $release ne packageRelease($pkg) and
-# log::l("ignoring $name-$version-$release.$arch in depslist mismatch release in hdlist"), $pkg = undef;
-# $pkg && $arch ne packageArch($pkg) and
-# log::l("ignoring $name-$version-$release.$arch in depslist mismatch arch in hdlist"), $pkg = undef;
-#
-# if ($pkg) {
-# $nb_deplist++;
-# $epoch && $epoch > 0 and $pkg->[$EPOCH] = $epoch; #- only 5% of the distribution use epoch (serial).
-# $pkg->[$SIZE_DEPS] = $sizeDeps;
-#
-# #- check position of package in depslist according to precomputed
-# #- limit by hdlist, very strict :-)
-# #- above warning have chance to raise an exception here, but may help
-# #- for debugging.
-# my $i = scalar @{$packages->{depslist}};
-# $i >= packageMedium($packages, $pkg)->{min} && $i <= packageMedium($packages, $pkg)->{max} or
-# log::l("inconsistency in position for $name-$version-$release.$arch in depslist and hdlist"), $mismatch = 1;
-# }
-#
-# #- package are already sorted in depslist to enable small transaction and multiple medium.
-# push @{$packages->{depslist}}, $pkg;
-# }
-#
-# #- check for mismatching package, it should break with above die unless depslist has too many errors!
-# $mismatch and die "depslist.ordered mismatch against hdlist files";
-#
-# #- check for same number of package in depslist and hdlists.
-# my $nb_hdlist = keys %{$packages->{names}};
-# $nb_hdlist == $nb_deplist or die "depslist.ordered has not same package as hdlist files ($nb_deplist != $nb_hdlist)";
-}
-
-#OBSOLETED TODO
-sub getProvides($) {
- return; #TODO
-# my ($packages) = @_;
-#
-# #- update provides according to dependencies, here are stored
-# #- reference to package directly and choice are included, this
-# #- assume only 1 of the choice is selected, else on unselection
-# #- the provided package will be deleted where other package still
-# #- need it.
-# #- base package are not updated because they cannot be unselected,
-# #- this save certainly a lot of memory since most of them may be
-# #- needed by a large number of package.
-# #- now using a packed of signed short, this means no more than 32768
-# #- packages can be managed by DrakX (currently about 2000).
-# my $i = 0;
-# foreach my $pkg (@{$packages->{depslist}}) {
-# $pkg or next;
-# unless (packageFlagBase($pkg)) {
-# foreach (map { split '\|' } grep { !/^NOTFOUND_/ } packageDepsId($pkg)) {
-# my $provided = packageById($packages, $_) or next;
-# packageFlagBase($provided) or $provided->[$PROVIDES] = pack "s*", (unpack "s*", $provided->[$PROVIDES]), $i;
-# }
-# }
-# ++$i;
-# }
-}
-
-sub read_rpmsrate {
- my ($packages, $f) = @_;
- my $line_nb = 0;
- my $fatal_error;
- my (@l);
- while (<$f>) {
- $line_nb++;
- /\t/ and die "tabulations not allowed at line $line_nb\n";
- s/#.*//; # comments
-
- my ($indent, $data) = /(\s*)(.*)/;
- next if !$data; # skip empty lines
-
- @l = grep { $_->[0] < length $indent } @l;
-
- my @m = @l ? @{$l[$#l][1]} : ();
- my ($t, $flag, @l2);
- while ($data =~
- /^((
- [1-5]
- |
- (?: (?: !\s*)? [0-9A-Z_]+(?:".*?")?)
- (?: \s*\|\|\s* (?: !\s*)? [0-9A-Z_]+(?:".*?")?)*
- )
- (?:\s+|$)
- )(.*)/x) { #@")) {
- ($t, $flag, $data) = ($1,$2,$3);
- while ($flag =~ s,^\s*(("[^"]*"|[^"\s]*)*)\s+,$1,) {}
- my $ok = 0;
- $flag = join('||', grep {
- if (my ($inv, $p) = /^(!)?HW"(.*)"/) {
- ($inv xor detect_devices::matching_desc($p)) and $ok = 1;
- 0;
- } else {
- 1;
- }
- } split '\|\|', $flag);
- push @m, $ok ? 'TRUE' : $flag || 'FALSE';
- push @l2, [ length $indent, [ @m ] ];
- $indent .= $t;
- }
- if ($data) {
- # has packages on same line
- my ($rate) = grep { /^\d$/ } @m or die sprintf qq(missing rate for "%s" at line %d (flags are %s)\n), $data, $line_nb, join('&&', @m);
- foreach (split ' ', $data) {
- if ($packages) {
- my $p = packageByName($packages, $_) or next;
- my @m2 = map { if_(/locales-(.*)/, qq(LOCALES"$1")) } $p->requires_nosense;
- my @m3 = ((grep { !/^\d$/ } @m), @m2);
- if (member('INSTALL', @m3)) {
- member('NOCOPY', @m3) or push @{$packages->{needToCopy} ||= []}, $_;
- next; #- don't need to put INSTALL flag for a package.
- }
- if ($p->rate) {
- my @m4 = $p->rflags;
- if (@m3 > 1 || @m4 > 1) {
- log::l("can't handle complicate flags for packages appearing twice ($_)");
- $fatal_error++;
- }
- log::l("package $_ appearing twice with different rates ($rate != ".$p->rate.")") if $rate != $p->rate;
- $p->set_rate($rate);
- $p->set_rflags("$m3[0]||$m4[0]");
- } else {
- $p->set_rate($rate);
- $p->set_rflags(@m3);
- }
- } else {
- print "$_ = ", join(" && ", @m), "\n";
- }
- }
- push @l, @l2;
- } else {
- push @l, [ $l2[0][0], $l2[$#l2][1] ];
- }
- }
- $fatal_error and die "$fatal_error fatal errors in rpmsrate";
-}
-
-sub readCompssUsers {
- my ($meta_class) = @_;
- my (%compssUsers, @sorted, $l);
-
- my $file = 'Mandrake/base/compssUsers';
- my $f = $meta_class && install_any::getFile("$file.$meta_class") || install_any::getFile($file) or die "can't find $file";
- local $_;
- while (<$f>) {
- /^\s*$/ || /^#/ and next;
- s/#.*//;
-
- if (/^(\S.*)/) {
- my $verbatim = $_;
- my ($icon, $descr, $path);
- /^(.*?)\s*\[path=(.*?)\](.*)/ and $_ = "$1$3", $path = $2;
- /^(.*?)\s*\[icon=(.*?)\](.*)/ and $_ = "$1$3", $icon = $2;
- /^(.*?)\s*\[descr=(.*?)\](.*)/ and $_ = "$1$3", $descr = $2;
- $compssUsers{"$path|$_"} = { label => $_, verbatim => $verbatim, path => $path, icons => $icon, descr => $descr, flags => $l=[] };
- push @sorted, "$path|$_";
- } elsif (/^\s+(.*?)\s*$/) {
- push @$l, $1;
- }
- }
- \%compssUsers, \@sorted;
-}
-sub saveCompssUsers {
- my ($prefix, $packages, $compssUsers, $sorted) = @_;
- my $flat;
- foreach (@$sorted) {
- my @fl = @{$compssUsers->{$_}{flags}};
- my %fl; $fl{$_} = 1 foreach @fl;
- $flat .= $compssUsers->{$_}{verbatim};
- foreach my $p (@{$packages->{depslist}}) {
- my @flags = $p->rflags;
- if ($p->rate && grep { grep { !/^!/ && $fl{$_} } split('\|\|') } @flags) {
- $flat .= sprintf "\t%d %s\n", $p->rate, $p->name;
- }
- }
- }
- output "$prefix/var/lib/urpmi/compssUsers.flat", $flat;
-}
-
-sub setSelectedFromCompssList {
- my ($packages, $compssUsersChoice, $min_level, $max_size) = @_;
- $compssUsersChoice->{TRUE} = 1; #- ensure TRUE is set
- my $nb = selectedSize($packages);
- foreach my $p (sort { $b->rate <=> $a->rate } @{$packages->{depslist}}) {
- my @flags = $p->rflags;
- next if
- !$p->rate || $p->rate < $min_level ||
- grep { !grep { /^!(.*)/ ? !$compssUsersChoice->{$1} : $compssUsersChoice->{$_} } split('\|\|') } @flags;
-
- #- determine the packages that will be selected when
- #- selecting $p. the packages are not selected.
- my $state = $packages->{state} ||= {};
- $state->{selected} = {};
- $state->{requested} = packageRequest($packages, $p) || {};
-
- $packages->resolve_requested($packages->{rpmdb}, $state, no_flag_update => 1,
- callback_choices => \&packageCallbackChoices);
-
- #- this enable an incremental total size.
- my $old_nb = $nb;
- foreach (keys %{$state->{selected}}) {
- my $p = $packages->{depslist}[$_] or next;
- $nb += $p->size;
- }
- if ($max_size && $nb > $max_size) {
- $nb = $old_nb;
- $min_level = $p->rate;
- $state->{requested} = {}; #- ensure no newer package will be selected.
- $packages->resolve_requested($packages->{rpmdb}, $state, clear_state => 1);
- last;
- }
-
- #- do the effective selection (was not done due to no_flag_update option used.
- foreach (keys %{$state->{selected}}) {
- my $pkg = $packages->{depslist}[$_];
- $state->{selected}{$_} ? $pkg->set_flag_requested : $pkg->set_flag_required;
- }
- }
- log::l("setSelectedFromCompssList: reached size ", formatXiB($nb), ", up to indice $min_level (less than ", formatXiB($max_size), ")");
- log::l("setSelectedFromCompssList: ", join(" ", sort map { $_->name } grep { $_->flag_selected } @{$packages->{depslist}}));
- $min_level;
-}
-
-#- usefull to know the size it would take for a given min_level/max_size
-#- just saves the selected packages, call setSelectedFromCompssList and restores the selected packages
-sub saveSelected {
- my ($packages) = @_;
- my @l = @{$packages->{depslist}};
- my @flags = map { ($_->flag_requested && 1) + ($_->flag_required && 2) + ($_->flag_upgrade && 4) } @l;
- [ $packages, \@l, \@flags ];
-}
-sub restoreSelected {
- my ($packages, $l, $flags) = @{$_[0]};
- mapn { my ($pkg, $flag) = @_;
- $pkg->set_flag_requested($flag & 1);
- $pkg->set_flag_required($flag & 2);
- $pkg->set_flag_upgrade($flag & 4);
- } $l, $flags;
-}
-
-sub computeGroupSize {
- my ($packages, $min_level) = @_;
-
- sub inside {
- my ($l1, $l2) = @_;
- my $i = 0;
- return if @$l1 > @$l2;
- foreach (@$l1) {
- my $c;
- while ($c = $l2->[$i++] cmp $_ ) {
- return if $c == 1 || $i > @$l2;
- }
- }
- 1;
- }
-
- sub or_ify {
- my ($first, @other) = @_;
- my @l = split('\|\|', $first);
- foreach (@other) {
- @l = map {
- my $n = $_;
- map { "$_&&$n" } @l;
- } split('\|\|');
- }
- #- HACK, remove LOCALES & CHARSET, too costly
- grep { !/LOCALES|CHARSET/ } @l;
- }
- sub or_clean {
- my (@l) = map { [ sort split('&&') ] } @_ or return '';
- my @r;
- B: while (@l) {
- my $e = shift @l;
- foreach (@r, @l) {
- inside($e, $_) and next B;
- }
- push @r, $e;
- }
- join("\t", map { join('&&', @$_) } @r);
- }
- my (%group, %memo);
-
- foreach my $p (@{$packages->{depslist}}) {
- my @flags = $p->rflags;
- next if !$p->rate || $p->rate < $min_level;
-
- my $flags = join("\t", @flags = or_ify(@flags));
- $group{$p->name} = ($memo{$flags} ||= or_clean(@flags));
-
- #- determine the packages that will be selected when selecting $p. the packages are not selected.
- my %newSelection;
- selectPackage($packages, $p, 0, \%newSelection);
- foreach (keys %newSelection) {
- my $p = $packages->{depslist}[$_] or next;
- my $s = $group{$p->name} || do {
- join("\t", or_ify($p->rflags));
- };
- next if length($s) > 80; # HACK, truncated too complicated expressions, too costly
- my $m = "$flags\t$s";
- $group{$p->name} = ($memo{$m} ||= or_clean(@flags, split("\t", $s)));
- }
- }
- my (%sizes, %pkgs);
- while (my ($k, $v) = each %group) {
- my $pkg = packageByName($packages, $k) or next;
- push @{$pkgs{$v}}, $k;
- $sizes{$v} += $pkg->size;
- }
- log::l(sprintf "%s %dMB %s", $_, $sizes{$_} / sqr(1024), join(',', @{$pkgs{$_}})) foreach keys %sizes;
- \%sizes, \%pkgs;
-}
-
-
-sub init_db {
- my ($prefix) = @_;
-
- my $f = "$prefix/root/drakx/install.log";
- open(LOG, ">> $f") ? log::l("opened $f") : log::l("Failed to open $f. No install log will be kept.");
- *LOG or *LOG = log::F() or *LOG = *STDERR;
- CORE::select((CORE::select(LOG), $| = 1)[0]);
- c::rpmErrorSetCallback(fileno LOG);
-#- c::rpmSetVeryVerbose();
-}
-
-sub rebuild_db_open_for_traversal {
- my ($packages, $prefix) = @_;
-
- unless (exists $packages->{rebuild_db}) {
- if (my $pid = fork()) {
- waitpid $pid, 0;
- ($? & 0xff00) and die "rebuilding of rpm database failed";
- } else {
- log::l("rebuilding rpm database");
- my $rebuilddb_dir = "$prefix/var/lib/rpmrebuilddb.$$";
- -d $rebuilddb_dir and log::l("removing stale directory $rebuilddb_dir"), rm_rf($rebuilddb_dir);
-
- URPM::DB::rebuild($prefix) or log::l("rebuilding of rpm database failed: ". c::rpmErrorString()), c::_exit(2);
-
- c::_exit(0);
- }
- $packages->{rebuild_db} = undef;
- }
-
- my $db = URPM::DB::open($prefix) or die "unable to open $prefix/var/lib/rpm/Packages";
- log::l("opened rpm database for examining existing packages");
-
- $db;
-}
-
-sub clean_old_rpm_db {
- my ($prefix) = @_;
- my $failed;
-
- foreach (qw(Basenames Conflictname Group Name Packages Providename Requirename Triggername)) {
- -s "$prefix/var/lib/rpm/$_" or $failed = 'failed';
- }
- #- rebuilding has been successfull, so remove old rpm database if any.
- #- once we have checked the rpm4 db file are present and not null, in case
- #- of doubt, avoid removing them...
- unless ($failed) {
- log::l("rebuilding rpm database completed successfully");
- foreach (qw(conflictsindex.rpm fileindex.rpm groupindex.rpm nameindex.rpm packages.rpm
- providesindex.rpm requiredby.rpm triggerindex.rpm)) {
- -e "$prefix/var/lib/rpm/$_" or next;
- log::l("removing old rpm file $_");
- rm_rf("$prefix/var/lib/rpm/$_");
- }
- }
-}
-
-sub done_db {
- log::l("closing install.log file");
- close LOG;
-}
-
-sub selectPackagesAlreadyInstalled {
- my ($packages, $prefix) = @_;
-
- #- avoid rebuilding the database if such case.
- $packages->{rebuild_db} = "oem does not need rebuilding the rpm db";
- my $db = rebuild_db_open_for_traversal($packages, $prefix);
-
- $packages->compute_installed_flags($db);
- log::l("done selecting packages to upgrade");
-}
-
-#OBSOLETED TODO
-sub selectPackagesToUpgrade($$$;$$) {
- return;
-# my ($packages, $prefix, $base, $toRemove, $toSave) = @_;
-# local $_; #- else perl complains on the map { ... } grep { ... } @...;
-#
-# local (*UPGRADE_INPUT, *UPGRADE_OUTPUT); pipe UPGRADE_INPUT, UPGRADE_OUTPUT;
-# if (my $pid = fork()) {
-# @{$toRemove || []} = (); #- reset this one.
-#
-# close UPGRADE_OUTPUT;
-# while (<UPGRADE_INPUT>) {
-# chomp;
-# my ($action, $name) = /^([\w\d]*):(.*)/;
-# for ($action) {
-# /remove/ and do { push @$toRemove, $name; next };
-# /keepfiles/ and do { push @$toSave, $name; next };
-#
-# my $p = $packages->{names}{$name} or die "unable to find package ($name)";
-# /^\d*$/ and do { $p->[$INSTALLED_CUMUL_SIZE] = $action; next };
-# /installed/ and do { packageSetFlagInstalled($p, 1); next };
-# /select/ and do { selectPackage($packages, $p); next };
-#
-# die "unknown action ($action)";
-# }
-# }
-# close UPGRADE_INPUT;
-# waitpid $pid, 0;
-# } else {
-# close UPGRADE_INPUT;
-#
-# my $db = rebuild_db_open_for_traversal($packages, $prefix);
-# #- used for package that are not correctly updated.
-# #- should only be used when nothing else can be done correctly.
-# my %upgradeNeedRemove = (
-## 'libstdc++' => 1,
-## 'compat-glibc' => 1,
-## 'compat-libs' => 1,
-# );
-#
-# #- generel purpose for forcing upgrade of package whatever version is.
-# my %packageNeedUpgrade = (
-# #'lilo' => 1, #- this package has been misnamed in 7.0.
-# );
-#
-# #- help removing package which may have different release numbering
-# my %toRemove; map { $toRemove{$_} = 1 } @{$toRemove || []};
-#
-# #- help searching package to upgrade in regard to already installed files.
-# my %installedFilesForUpgrade;
-#
-# #- help keeping memory by this set of package that have been obsoleted.
-# my %obsoletedPackages;
-#
-# #- make a subprocess here for reading filelist, this is important
-# #- not to waste a lot of memory for the main program which will fork
-# #- latter for each transaction.
-# local (*INPUT, *OUTPUT_CHILD); pipe INPUT, OUTPUT_CHILD;
-# local (*INPUT_CHILD, *OUTPUT); pipe INPUT_CHILD, OUTPUT;
-# if (my $pid = fork()) {
-# close INPUT_CHILD;
-# close OUTPUT_CHILD;
-# select((select(OUTPUT), $| = 1)[0]);
-#
-# #- internal reading from interactive mode of parsehdlist.
-# #- takes a code to call with the line read, this avoid allocating
-# #- memory for that.
-# my $ask_child = sub {
-# my ($name, $tag, $code) = @_;
-# $code or die "no callback code for parsehdlist output";
-# print OUTPUT "$name:$tag\n";
-#
-# local $_;
-# while (<INPUT>) {
-# chomp;
-# /^\s*$/ and last;
-# $code->($_);
-# }
-# };
-#
-# #- select packages which obseletes other package, obselete package are not removed,
-# #- should we remove them ? this could be dangerous !
-# foreach my $p (values %{$packages->{names}}) {
-# $ask_child->(packageName($p), "obsoletes", sub {
-# #- take care of flags and version and release if present
-# local ($_) = @_;
-# if (my ($n,$o,$v,$r) = /^(\S*)\s*(\S*)\s*([^\s-]*)-?(\S*)/) {
-# my $obsoleted = 0;
-# my $check_obsoletes = sub {
-# my ($header) = @_;
-# (!$v || eval(versionCompare(c::headerGetEntry($header, 'version'), $v) . $o . 0)) &&
-# (!$r || versionCompare(c::headerGetEntry($header, 'version'), $v) != 0 ||
-# eval(versionCompare(c::headerGetEntry($header, 'release'), $r) . $o . 0)) or return;
-# ++$obsoleted;
-# };
-# c::rpmdbNameTraverse($db, $n, $check_obsoletes);
-# if ($obsoleted > 0) {
-# log::l("selecting " . packageName($p) . " by selection on obsoletes");
-# $obsoletedPackages{$1} = undef;
-# selectPackage($packages, $p);
-# }
-# }
-# });
-# }
-#
-# #- mark all files which are not in /etc/rc.d/ for packages which are already installed but which
-# #- are not in the packages list to upgrade.
-# #- the 'installed' property will make a package unable to be selected, look at select.
-# c::rpmdbTraverse($db, sub {
-# my ($header) = @_;
-# my $otherPackage = (c::headerGetEntry($header, 'release') !~ /mdk\w*$/ &&
-# (c::headerGetEntry($header, 'name'). '-' .
-# c::headerGetEntry($header, 'version'). '-' .
-# c::headerGetEntry($header, 'release')));
-# my $p = $packages->{names}{c::headerGetEntry($header, 'name')};
-#
-# if ($p) {
-# my $epoch_cmp = c::headerGetEntry($header, 'epoch') <=> packageEpoch($p);
-# my $version_cmp = $epoch_cmp == 0 && versionCompare(c::headerGetEntry($header, 'version'),
-# packageVersion($p));
-# my $version_rel_test = $epoch_cmp > 0 || $epoch_cmp == 0 &&
-# ($version_cmp > 0 || $version_cmp == 0 &&
-# versionCompare(c::headerGetEntry($header, 'release'), packageRelease($p)) >= 0);
-# if ($packageNeedUpgrade{packageName($p)}) {
-# log::l("package ". packageName($p) ." need to be upgraded");
-# } elsif ($version_rel_test) { #- by default, package are upgraded whatever version is !
-# if ($otherPackage && $version_cmp <= 0) {
-# log::l("force upgrading $otherPackage since it will not be updated otherwise");
-# } else {
-# #- let the parent known this installed package.
-# print UPGRADE_OUTPUT "installed:" . packageName($p) . "\n";
-# packageSetFlagInstalled($p, 1);
-# }
-# } elsif ($upgradeNeedRemove{packageName($p)}) {
-# my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
-# c::headerGetEntry($header, 'version'). '-' .
-# c::headerGetEntry($header, 'release'));
-# log::l("removing $otherPackage since it will not upgrade correctly!");
-# $toRemove{$otherPackage} = 1; #- force removing for theses other packages, select our.
-# }
-# } else {
-# if (exists $obsoletedPackages{c::headerGetEntry($header, 'name')}) {
-# my @files = c::headerGetEntry($header, 'filenames');
-# @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
-# ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
-# }
-# }
-# });
-#
-# #- find new packages to upgrade.
-# foreach my $p (values %{$packages->{names}}) {
-# my $skipThis = 0;
-# my $count = c::rpmdbNameTraverse($db, packageName($p), sub {
-# my ($header) = @_;
-# $skipThis ||= packageFlagInstalled($p);
-# });
-#
-# #- skip if not installed (package not found in current install).
-# $skipThis ||= ($count == 0);
-#
-# #- make sure to upgrade package that have to be upgraded.
-# $packageNeedUpgrade{packageName($p)} and $skipThis = 0;
-#
-# #- select the package if it is already installed with a lower version or simply not installed.
-# unless ($skipThis) {
-# my $cumulSize;
-#
-# selectPackage($packages, $p);
-#
-# #- keep in mind installed files which are not being updated. doing this costs in
-# #- execution time but use less memory, else hash all installed files and unhash
-# #- all file for package marked for upgrade.
-# c::rpmdbNameTraverse($db, packageName($p), sub {
-# my ($header) = @_;
-# $cumulSize += c::headerGetEntry($header, 'size');
-# my @files = c::headerGetEntry($header, 'filenames');
-# @installedFilesForUpgrade{grep { ($_ !~ m|^/dev/| && $_ !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| &&
-# ! -d "$prefix/$_" && ! -l "$prefix/$_") } @files} = ();
-# });
-#
-# $ask_child->(packageName($p), "files", sub {
-# delete $installedFilesForUpgrade{$_[0]};
-# });
-#
-# #- keep in mind the cumul size of installed package since they will be deleted
-# #- on upgrade, only for package that are allowed to be upgraded.
-# if (allowedToUpgrade(packageName($p))) {
-# print UPGRADE_OUTPUT "$cumulSize:" . packageName($p) . "\n";
-# }
-# }
-# }
-#
-# #- unmark all files for all packages marked for upgrade. it may not have been done above
-# #- since some packages may have been selected by depsList.
-# foreach my $p (values %{$packages->{names}}) {
-# if (packageFlagSelected($p)) {
-# $ask_child->(packageName($p), "files", sub {
-# delete $installedFilesForUpgrade{$_[0]};
-# });
-# }
-# }
-#
-# #- select packages which contains marked files, then unmark on selection.
-# #- a special case can be made here, the selection is done only for packages
-# #- requiring locales if the locales are selected.
-# #- another special case are for devel packages where fixes over the time has
-# #- made some files moving between the normal package and its devel couterpart.
-# #- if only one file is affected, no devel package is selected.
-# foreach my $p (values %{$packages->{names}}) {
-# unless (packageFlagSelected($p)) {
-# my $toSelect = 0;
-# $ask_child->(packageName($p), "files", sub {
-# if ($_[0] !~ m|^/dev/| && $_[0] !~ m|^/etc/rc.d/| && $_ !~ m|\.la$| && exists $installedFilesForUpgrade{$_[0]}) {
-# ++$toSelect if ! -d "$prefix/$_[0]" && ! -l "$prefix/$_[0]";
-# }
-# delete $installedFilesForUpgrade{$_[0]};
-# });
-# if ($toSelect) {
-# if ($toSelect <= 1 && packageName($p) =~ /-devel/) {
-# log::l("avoid selecting " . packageName($p) . " as not enough files will be updated");
-# } else {
-# #- default case is assumed to allow upgrade.
-# my @deps = map { my $p = packageById($packages, $_);
-# if_($p && packageName($p) =~ /locales-/, $p) } packageDepsId($p);
-# if (@deps == 0 || @deps > 0 && (grep { !packageFlagSelected($_) } @deps) == 0) {
-# log::l("selecting " . packageName($p) . " by selection on files");
-# selectPackage($packages, $p);
-# } else {
-# log::l("avoid selecting " . packageName($p) . " as its locales language is not already selected");
-# }
-# }
-# }
-# }
-# }
-#
-# #- clean memory...
-# %installedFilesForUpgrade = ();
-#
-# #- no need to still use the child as this point, we can let him to terminate.
-# close OUTPUT;
-# close INPUT;
-# waitpid $pid, 0;
-# } else {
-# close INPUT;
-# close OUTPUT;
-# open STDIN, "<&INPUT_CHILD";
-# open STDOUT, ">&OUTPUT_CHILD";
-# exec if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), "parsehdlist", "--interactive", map { "/tmp/$_->{hdlist}" } values %{$packages->{mediums}}
-# or c::_exit(1);
-# }
-#
-# #- let the parent known about what we found here!
-# foreach my $p (values %{$packages->{names}}) {
-# print UPGRADE_OUTPUT "select:" . packageName($p) . "\n" if packageFlagSelected($p);
-# }
-#
-# #- clean false value on toRemove.
-# delete $toRemove{''};
-#
-# #- get filenames that should be saved for packages to remove.
-# #- typically config files, but it may broke for packages that
-# #- are very old when compabilty has been broken.
-# #- but new version may saved to .rpmnew so it not so hard !
-# if ($toSave && keys %toRemove) {
-# c::rpmdbTraverse($db, sub {
-# my ($header) = @_;
-# my $otherPackage = (c::headerGetEntry($header, 'name'). '-' .
-# c::headerGetEntry($header, 'version'). '-' .
-# c::headerGetEntry($header, 'release'));
-# if ($toRemove{$otherPackage}) {
-# print UPGRADE_OUTPUT "remove:$otherPackage\n";
-# if (packageFlagBase($packages->{names}{c::headerGetEntry($header, 'name')})) {
-# delete $toRemove{$otherPackage}; #- keep it selected, but force upgrade.
-# } else {
-# my @files = c::headerGetEntry($header, 'filenames');
-# my @flags = c::headerGetEntry($header, 'fileflags');
-# for my $i (0..$#flags) {
-# if ($flags[$i] & c::RPMFILE_CONFIG()) {
-# print UPGRADE_OUTPUT "keepfiles:$files[$i]\n" unless $files[$i] =~ /kdelnk/;
-# }
-# }
-# }
-# }
-# });
-# }
-#
-# #- close db, job finished !
-# c::rpmdbClose($db);
-# log::l("done selecting packages to upgrade");
-#
-# close UPGRADE_OUTPUT;
-# c::_exit(0);
-# }
-#
-# #- keep a track of packages that are been selected for being upgraded,
-# #- these packages should not be unselected (unless expertise)
-# foreach my $p (values %{$packages->{names}}) {
-# packageSetFlagUpgrade($p, 1) if packageFlagSelected($p);
-# }
-}
-
-sub allowedToUpgrade { $_[0] !~ /^(kernel|kernel22|kernel2.2|kernel-secure|kernel-smp|kernel-linus|kernel-linus2.2|hackkernel|kernel-enterprise)$/ }
-
-sub installTransactionClosure {
- my ($packages, $id2pkg) = @_;
- my ($id, %closure, @l);
-
- @l = sort { $a <=> $b } keys %$id2pkg;
- while (defined($id = shift @l)) {
- my @l2 = ($id);
-
- while (defined($id = shift @l2)) {
- exists $closure{$id} and next;
- $closure{$id} = undef;
-
- my $pkg = $packages->{depslist}[$id];
- foreach ($pkg->requires_nosense) {
- foreach (keys %{$packages->{provides}{$_} || {}}) {
- if ($id2pkg->{$_}) {
- push @l2, $_;
- last;
- }
- }
- }
- }
-
- keys %closure >= $limitMinTrans and last;
- }
-
- map { delete $id2pkg->{$_} } grep { $id2pkg->{$_} } keys %closure;
-}
-
-sub installCallback {
-# my $msg = shift;
-# log::l($msg .": ". join(',', @_));
-}
-
-sub install($$$;$$) {
- my ($prefix, $isUpgrade, $toInstall, $packages) = @_;
- my %packages;
-
- return if $::g_auto_install || !scalar(@$toInstall);
-
- #- for root loopback'ed /boot
- my $loop_boot = loopback::prepare_boot($prefix);
-
- #- first stage to extract some important informations
- #- about the packages selected. this is used to select
- #- one or many transaction.
- my ($total, $nb);
- foreach my $pkg (@$toInstall) {
- $packages{$pkg->id} = $pkg;
- $nb++;
- $total += to_int($pkg->size); #- do not correct for upgrade!
- }
-
- log::l("pkgs::install $prefix");
- log::l("pkgs::install the following: ", join(" ", map { $_->name } values %packages));
- eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";
-
- init_db($prefix);
-
- #- do not modify/translate the message used with installCallback since
- #- these are keys during progressing installation, or change in other
- #- place (install_steps_gtk.pm,...).
- installCallback($packages, 'user', undef, 'install', $nb, $total);
-
- my $medium = 1;
- do {
- my @transToInstall = installTransactionClosure($packages, \%packages);
- $nb = values %packages;
-
- #- added to exit typically after last media unselected.
- if ($nb == 0 && scalar(@transToInstall) == 0) {
- cleanHeaders($prefix);
-
- loopback::save_boot($loop_boot);
- return;
- }
-
- #- extract headers for parent as they are used by callback.
- extractHeaders($prefix, \@transToInstall, $packages->{mediums});
-
- if ($packages->{mediums}{$medium}{method} eq 'cdrom') {
- #- extract packages to make sure the getFile below to force
- #- accessing medium will not be redirected to updates.
- my @origin = grep { packageMedium($packages, $_) == $medium } @transToInstall;
-
- if (@origin) {
- #- reset file descriptor open for main process but
- #- make sure error trying to change from hdlist are
- #- trown from main process too.
- install_any::getFile($origin[0]->filename, packageMedium($packages, $origin[0])->{descr});
-
-# #- allow some log here to check selected status.
-# log::l("status for medium $origin[0][$MEDIUM] ($media->{$origin[0][$MEDIUM]}{descr}) is " .
-# ($media->{$origin[0][$MEDIUM]}{selected} ? "selected" : "refused"));
- }
- }
- #- and make sure there are no staling open file descriptor too (before forking)!
- install_any::getFile('XXX');
-
- my ($retry_pkg, $retry_count);
- while ($retry_pkg || @transToInstall) {
- local (*INPUT, *OUTPUT); pipe INPUT, OUTPUT;
- if (my $pid = fork()) {
- close OUTPUT;
- my $error_msg = '';
- local $_;
- while (<INPUT>) {
- if (/^die:(.*)/) {
- $error_msg = $1;
- last;
- } else {
- chomp;
- my @params = split ":";
- if ($params[0] eq 'close') {
- my $pkg = $packages->{depslist}[$params[1]];
- $pkg->set_flag_installed(1);
- $pkg->set_flag_upgrade(0);
- } else {
- installCallback($packages, @params);
- }
- }
- }
- $error_msg and $error_msg .= join('', <INPUT>);
- waitpid $pid, 0;
- close INPUT;
- $error_msg and die $error_msg;
- } else {
- #- child process will run each transaction.
- $SIG{SEGV} = sub { log::l("segmentation fault on transactions"); c::_exit(0) };
- my @prev_pids = grep { /^\d+$/ } all("/proc");
- my $db;
- eval {
- close INPUT;
- select((select(OUTPUT), $| = 1)[0]);
- my $db = URPM::DB::open($prefix, 1) or die "error opening RPM database: ", c::rpmErrorString();
- my $trans = $db->create_transaction($prefix);
- if ($retry_pkg) {
- log::l("opened rpm database for retry transaction of 1 package only");
- $trans->add($retry_pkg, $isUpgrade && allowedToUpgrade($retry_pkg->name));
- } else {
- log::l("opened rpm database for transaction of ". scalar @transToInstall .
- " new packages, still $nb after that to do");
- $trans->add($_, $isUpgrade && allowedToUpgrade($_->name))
- foreach @transToInstall;
- }
-
- $trans->order or die "error ordering package list: " . c::rpmErrorString();
- $trans->set_script_fd(fileno LOG);
-
- log::l("rpmRunTransactions start");
- my @probs = $trans->run($packages, force => 1, nosize => 1, callback_open => sub {
- my ($data, $type, $id) = @_;
- my $pkg = defined $id && $data->{depslist}[$id];
- my $f = $pkg && $pkg->filename;
- print LOG "$f\n";
- #my $fd = install_any::getFile($f, $media->{$p->[$MEDIUM]}{descr});
- my $fd = install_any::getFile($f);
- $fd ? fileno $fd : -1;
- }, callback_close => sub {
- my ($data, $type, $id) = @_;
- my $pkg = defined $id && $data->{depslist}[$id] or return;
- my $check_installed;
- $db->traverse_tag('name', [ $pkg->name ], sub {
- my ($p) = @_;
- $check_installed ||= $pkg->compare_pkg($p) == 0;
- });
- $check_installed and print OUTPUT "close:$id\n";
- }, callback_inst => sub {
- my ($data, $type, $id, $subtype, $amount, $total) = @_;
- print OUTPUT "$type:$id:$subtype:$amount:$total\n";
- });
- log::l("rpmRunTransactions done, now trying to close still opened fd");
- install_any::getFile('XXX'); #- close still opened fd.
-
- @probs and die "installation of rpms failed:\n ", join("\n ", @probs);
- }; $@ and print OUTPUT "die:$@\n";
- close OUTPUT;
-
- #- now search for child process which may be locking the cdrom, making it unable to be ejected.
- my @allpids = grep { /^\d+$/ } all("/proc");
- my %ppids;
- foreach (@allpids) {
- cat_("/proc/$_/status") =~ /^PPid:\s+(\d+)/m;
- push @{$ppids{$1 || 1}}, $_;
- }
- my @killpid = difference2(\@allpids, [ @prev_pids,
- difference2([ $$, hashtree2list(getppid, \%ppids) ],
- [ hashtree2list($$, \%ppids) ]) ]);
-
- if (@killpid) {
- log::l("ERROR: DrakX should not have to clean the packages shit. Killing ". join(", ", @killpid));
- kill 15, @killpid;
- sleep 2;
- kill 9, @killpid;
- }
-
- c::_exit(0);
- }
-
- #- if we are using a retry mode, this means we have to split the transaction with only
- #- one package for each real transaction.
- unless ($retry_pkg) {
- my @badPackages;
- foreach (@transToInstall) {
- if (!$_->flag_installed && packageMedium($packages, $_)->{selected} && !exists($ignoreBadPkg{$_->name})) {
- push @badPackages, $_;
- log::l("bad package ".$_->fullname);
- } else {
- $_->free_header;
- }
- }
- @transToInstall = @badPackages;
- #- if we are in retry mode, we have to fetch only one package at a time.
- $retry_pkg = shift @transToInstall;
- $retry_count = 3;
- } else {
- if (!$retry_pkg->flag_installed && packageMedium($packages, $retry_pkg)->{selected} && !exists($ignoreBadPkg{$retry_pkg->name})) {
- if ($retry_count) {
- log::l("retrying installing package ".$retry_pkg->fullname." alone in a transaction");
- --$retry_count;
- } else {
- log::l("bad package ". $retry_pkg->fullname ." unable to be installed");
- $retry_pkg->set_flag_requested(0);
- $retry_pkg->set_flag_required(0);
- cdie ("error installing package list: ". $retry_pkg->fullname);
- }
- }
- if ($retry_pkg->flag_installed || !$retry_pkg->flag_selected) {
- $retry_pkg->free_header;
- $retry_pkg = shift @transToInstall;
- $retry_count = 3;
- }
- }
- }
- cleanHeaders($prefix);
- } while ($nb > 0 && !$pkgs::cancel_install);
-
- done_db();
-
- cleanHeaders($prefix);
-
- loopback::save_boot($loop_boot);
-}
-
-sub remove($$) {
- my ($prefix, $toRemove) = @_;
-
- return if $::g_auto_install || !@{$toRemove || []};
-
- log::l("reading /usr/lib/rpm/rpmrc");
- c::rpmReadConfigFiles() or die "can't read rpm config files";
- log::l("\tdone");
-
- my $db = c::rpmdbOpen($prefix) or die "error opening RPM database: ", c::rpmErrorString();
- log::l("opened rpm database for removing old packages");
-
- my $trans = c::rpmtransCreateSet($db, $prefix);
-
- foreach my $p (@$toRemove) {
- #- stuff remove all packages that matches $p, not a problem since $p has name-version-release format.
- c::rpmtransRemovePackages($db, $trans, $p) if allowedToUpgrade($p);
- }
-
- eval { fs::mount("/proc", "$prefix/proc", "proc", 0) } unless -e "$prefix/proc/cpuinfo";
-
- my $callbackOpen = sub { log::l("trying to open file from $_[0] which should not happen"); };
- my $callbackClose = sub { log::l("trying to close file from $_[0] which should not happen"); };
-
- #- we are not checking depends since it should come when
- #- upgrading a system. although we may remove some functionalities ?
-
- #- do not modify/translate the message used with installCallback since
- #- these are keys during progressing installation, or change in other
- #- place (install_steps_gtk.pm,...).
- installCallback($db, 'user', undef, 'remove', scalar @$toRemove);
-
- #- TODO
- if (my @probs = c::rpmRunTransactions($trans, $callbackOpen, $callbackClose, \&installCallback, 1)) {
- die "removing of old rpms failed:\n ", join("\n ", @probs);
- }
- c::rpmtransFree($trans);
- c::rpmdbClose($db);
- log::l("rpm database closed");
-
- #- keep in mind removing of these packages by cleaning $toRemove.
- @{$toRemove || []} = ();
-}
-
-sub selected_leaves {
- my ($packages) = @_;
- my @leaves;
-
- foreach (@{$packages->{depslist}}) {
- $_->flag_requested && !$_->flag_base and push @leaves, $_->name;
- }
-# my %l;
-#
-# #- initialize l with all id, not couting base package.
-# foreach my $id (0 .. $#{$packages->{depslist}}) {
-# my $pkg = packageById($packages, $id) or next;
-# packageSelectedOrInstalled($pkg) && !$pkg->flag_base or next;
-# $l{$id} = 1;
-# }
-#
-# foreach my $id (keys %l) {
-# #- when a package is in a choice, increase its value in hash l, because
-# #- it has to be examined before when we will select them later.
-# #- NB: this number may be computed before to save time.
-# my $p = $packages->{depslist}[$id] or next;
-# foreach (packageDepsId($p)) {
-# if (/\|/) {
-# foreach (split '\|') {
-# exists $l{$_} or next;
-# $l{$_} > 1 + $l{$id} or $l{$_} = 1 + $l{$id};
-# }
-# }
-# }
-# }
-#
-# #- at this level, we can remove selected packages that are already
-# #- required by other, but we have to sort according to choice usage.
-# foreach my $id (sort { $l{$b} <=> $l{$a} || $b <=> $a } keys %l) {
-# #- do not count already deleted id, else cycles will be removed.
-# $l{$id} or next;
-#
-# my $p = $packages->{depslist}[$id] or next;
-# foreach (packageDepsId($p)) {
-# #- choices need no more to be examined, this has been done above.
-# /\|/ and next;
-# #- improve value of this one, so it will be selected before.
-# $l{$id} < $l{$_} and $l{$id} = $l{$_};
-# $l{$_} = 0;
-# }
-# }
-#
-# #- now sort again according to decrementing value, and gives packages name.
-# [ map { packageName($packages->{depslist}[$_]) } sort { $l{$b} <=> $l{$a} } grep { $l{$_} > 0 } keys %l ];
- \@leaves;
-}
-
-
-sub naughtyServers {
- my ($packages) = @_;
-
- my @old_81 = qw(
-freeswan
-);
- my @old_82 = qw(
-vnc-server
-postgresql-server
-mon
-);
-
- my @new_80 = qw(
-jabber
-FreeWnn
-MySQL
-am-utils
-apache
-boa
-cfengine
-cups
-drakxtools-http
-finger-server
-imap
-leafnode
-lpr
-ntp
-openssh-server
-pidentd
-postfix
-proftpd
-rwall
-rwho
-squid
-webmin
-wu-ftpd
-ypbind
-); # nfs-utils-clients portmap
- # X server
-
- my @new_81 = qw(
-apache-mod_perl
-ftp-server-krb5
-mcserv
-samba
-telnet-server-krb5
-ypserv
-);
-
- my @new_82 = qw(
-LPRng
-bind
-httpd-naat
-ibod
-inn
-netatalk
-nfs-utils
-rusers-server
-samba-swat
-tftp-server
-ucd-snmp
-);
-
- my @naughtyServers = (@new_80, @new_81, @new_82);
-
- grep {
- my $p = packageByName($packages, $_);
- $p && $p->flag_selected;
- } @naughtyServers;
-}
-
-sub hashtree2list {
- my ($e, $h) = @_;
- my @l;
- my @todo = $e;
- while (@todo) {
- my $e = shift @todo;
- push @l, $e;
- push @todo, @{$h->{$e}};
- }
- @l;
-}
-
-1;
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
deleted file mode 100644
index c6478a2ad..000000000
--- a/perl-install/printer.pm
+++ /dev/null
@@ -1,2241 +0,0 @@
-package printer;
-
-# $Id$
-
-#use diagnostics;
-#use strict;
-
-
-use common;
-use run_program;
-
-#-if we are in an DrakX config
-my $prefix = "";
-
-#-location of the printer database in an installed system
-my $PRINTER_DB_FILE = "/usr/share/foomatic/db/compiled/overview.xml";
-#-configuration directory of Foomatic
-my $FOOMATICCONFDIR = "/etc/foomatic";
-#-location of the file containing the default spooler's name
-my $FOOMATIC_DEFAULT_SPOOLER = "$FOOMATICCONFDIR/defaultspooler";
-
-%spooler = (
- _("CUPS - Common Unix Printing System") => "cups",
- _("LPRng - LPR New Generation") => "lprng",
- _("LPD - Line Printer Daemon") => "lpd",
- _("PDQ - Print, Don't Queue") => "pdq"
-# _("PDQ - Marcia, click here!") => "pdq"
-);
-%spooler_inv = reverse %spooler;
-
-%shortspooler = (
- _("CUPS") => "cups",
- _("LPRng") => "lprng",
- _("LPD") => "lpd",
- _("PDQ") => "pdq"
-);
-%shortspooler_inv = reverse %shortspooler;
-
-%lprcommand = (
- "cups" => "lpr-cups",
- "lprng" => "lpr-lpd",
- "lpd" => "lpr-lpd",
- "pdq" => "lpr-pdq"
-);
-
-%printer_type = (
- _("Local printer") => "LOCAL",
- _("Remote printer") => "REMOTE",
- _("Printer on remote CUPS server") => "CUPS",
- _("Printer on remote lpd server") => "LPD",
- _("Network printer (TCP/Socket)") => "SOCKET",
- _("Printer on SMB/Windows 95/98/NT server") => "SMB",
- _("Printer on NetWare server") => "NCP",
- _("Enter a printer device URI") => "URI",
- _("Pipe job into a command") => "POSTPIPE"
-);
-%printer_type_inv = reverse %printer_type;
-
-#------------------------------------------------------------------------------
-
-sub set_prefix($) { $prefix = $_[0]; }
-
-sub default_printer_type($) { "LOCAL" }
-
-sub spooler {
- # LPD is taken from the menu for the moment because the classic LPD is
- # highly unsecure. Depending on how the GNU lpr development is going on
- # LPD support can be reactivated by uncommenting the line which is
- # commented out now.
-
- #return @spooler_inv{qw(cups lpd lprng pdq)};
- return @spooler_inv{qw(cups lprng pdq)};
-}
-
-sub printer_type($) {
- my ($printer) = @_;
- for ($printer->{SPOOLER}) {
- /cups/ && return @printer_type_inv{qw(LOCAL),
- qw(LPD SOCKET SMB),
- $::expert ? qw(URI) : ()};
- /lpd/ && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
- $::expert ? qw(POSTPIPE URI) : ()};
- /lprng/ && return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP),
- $::expert ? qw(POSTPIPE URI) : ()};
- /pdq/ && return @printer_type_inv{qw(LOCAL LPD SOCKET),
- $::expert ? qw(URI) : ()};
- }
-}
-
-sub get_default_spooler () {
- if (-f "$prefix$FOOMATIC_DEFAULT_SPOOLER") {
- open DEFSPOOL, "< $prefix$FOOMATIC_DEFAULT_SPOOLER";
- my $spool = <DEFSPOOL>;
- chomp $spool;
- close DEFSPOOL;
- return $spool if ($spool =~ /cups|lpd|lprng|pdq/);
- }
-}
-
-sub set_default_spooler ($) {
- my ($printer) = @_;
- # Make Foomatic config directory if it does not exist yet
- mkdir "$prefix$FOOMATICCONFDIR" if (!(-d "$prefix$FOOMATICCONFDIR"));
- # Mark the default driver in a file
- open DEFSPOOL, "> $prefix$FOOMATIC_DEFAULT_SPOOLER" ||
- die "Cannot create $prefix$FOOMATIC_DEFAULT_SPOOLER!";
- print DEFSPOOL $printer->{SPOOLER};
- close DEFSPOOL;
-}
-
-sub set_permissions {
- my ($file, $perms, $owner, $group) = @_;
- # We only need to set the permissions during installation to be able to
- # print test pages. After installation the devfsd daemon does the business
- # automatically.
- if (!$::isInstall) {return 1;}
- if ($owner && $group) {
- run_program::rooted($prefix, "/bin/chown", "$owner.$group", $file)
- || die "Could not start chown!";
- } elsif ($owner) {
- run_program::rooted($prefix, "/bin/chown", $owner, $file)
- || die "Could not start chown!";
- } elsif ($group) {
- run_program::rooted($prefix, "/bin/chgrp", $group, $file)
- || die "Could not start chgrp!";
- }
- run_program::rooted($prefix, "/bin/chmod", $perms, $file)
- || die "Could not start chmod!";
-}
-
-sub restart_service ($) {
- my ($service) = @_;
- # Exit silently if the service is not installed
- return 1 if (!(-x "$prefix/etc/rc.d/init.d/$service"));
- run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "restart");
- if (($? >> 8) != 0) {
- return 0;
- } else {
- # CUPS needs some time to come up.
- wait_for_cups() if ($service eq "cups");
- return 1;
- }
-}
-
-sub start_service ($) {
- my ($service) = @_;
- # Exit silently if the service is not installed
- return 1 if (!(-x "$prefix/etc/rc.d/init.d/$service"));
- run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "start");
- if (($? >> 8) != 0) {
- return 0;
- } else {
- # CUPS needs some time to come up.
- wait_for_cups() if ($service eq "cups");
- return 1;
- }
-}
-
-sub stop_service ($) {
- my ($service) = @_;
- # Exit silently if the service is not installed
- return 1 if (!(-x "$prefix/etc/rc.d/init.d/$service"));
- run_program::rooted($prefix, "/etc/rc.d/init.d/$service", "stop");
- if (($? >> 8) != 0) {return 0;} else {return 1;}
-}
-
-sub service_starts_on_boot ($) {
- my ($service) = @_;
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /sbin/chkconfig --list $service 2>&1\" |" ||
- return 0;
- while (my $line = <F>) {
- chomp $line;
- if ($line =~ /:on/) {
- close F;
- return 1;
- }
- }
- close F;
- return 0;
-}
-
-sub start_service_on_boot ($) {
- my ($service) = @_;
- run_program::rooted($prefix, "/sbin/chkconfig", "--add", $service)
- || return 0;
- return 1;
-}
-
-sub SIGHUP_daemon {
- my ($service) = @_;
- if ($service eq "cupsd") {$service = "cups"};
- # PDQ has no daemon, exit.
- if ($service eq "pdq") {return 1};
- # CUPS needs auto-configuration
- run_program::rooted($prefix, "/usr/sbin/setcupsconfig") if ($service eq "cups");
- # Name of the daemon
- my %daemons = (
- "lpr" => "lpd",
- "lpd" => "lpr",
- "lprng" => "lpd",
- "cups" => "cupsd",
- "devfs" => "devfsd",
- );
- my $daemon = $deamons{$service};
- $daemon = $service if (! defined $daemon);
- if ($service eq "cups") {
- # The current CUPS (1.1.13) dies on SIGHUP, to the normal restart.
- restart_service($service);
- # CUPS needs some time to come up.
- wait_for_cups();
- } else {
- # Send the SIGHUP
- run_program::rooted($prefix, "/usr/bin/killall", "-HUP", $daemon);
- }
- return 1;
-}
-
-sub wait_for_cups {
- # CUPS needs some time to come up. Wait up to 30 seconds, checking
- # whether CUPS is ready.
- my $cupsready = 0;
- my $i;
- for ($i = 0; $i < 30; $i++) {
- run_program::rooted($prefix, "/usr/bin/lpstat", "-r");
- if (($? >> 8) != 0) {
- # CUPS is not ready, continue
- sleep 1;
- } else {
- # CUPS is ready, quit
- $cupsready = 1;
- last;
- }
- }
- return $cupsready;
-}
-
-sub assure_device_is_available_for_cups {
- # Checks whether CUPS already "knows" a certain port, it does not
- # know it usually when the appropriate kernel module is loaded
- # after CUPS was started or when the printer is turned on after
- # CUPS was started. CUPS 1.1.12 and newer refuses to set up queues
- # on devices which it does not know, it points these queues to
- # file:/dev/null instead. Restart CUPS if necessary to assure that
- # CUPS knows the device.
- my ($device) = @_;
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /usr/sbin/lpinfo -v\" |" ||
- die "Could not run \"lpinfo\"!";
- while (my $line = <F>) {
- if ($line =~ /$device/) { # Found a line containing the device name,
- # so CUPS knows it.
- close F;
- return 1;
- }
- }
- close F;
- return SIGHUP_daemon("cups");
-}
-
-sub network_running {
- # If the network is not running return 0, otherwise 1.
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /sbin/ifconfig\" |" ||
- die "Could not run \"ifconfig\"!";
- while (my $line = <F>) {
- if (($line !~ /^lo\s+/) && # The loopback device can have been
- # started by the spooler's startup script
- ($line =~ /^(\S+)\s+/)) { # In this line starts an entry for a
- # running network
- close F;
- return 1;
- }
- }
- close F;
- return 0;
-}
-
-sub get_security_level {
- # Get security level by reading /etc/profile (only after install).
- # This is a preliminary solution until msec puts the security level
- # definition into the correct file.
- $file = "/etc/profile";
- if (-f $file) {
- local *F;
- open F, "< $file" || return 0;
- while (my $line = <F>) {
- if ($line =~ /^\s*SECURE_LEVEL=([0-5])\s*$/) {
- close F;
- return $1;
- }
- }
- close F;
- }
- return 0;
-}
-
-
-sub spooler_in_security_level {
- # Was the current spooler already added to the current security level?
- my ($spooler, $level) = @_;
- my $sp;
- $sp = (($spooler eq "lpr") || ($spooler eq "lprng")) ? "lpd" : $spooler;
- $file = "$prefix/etc/security/msec/server.$level";
- if (-f $file) {
- local *F;
- open F, "< $file" || return 0;
- while (my $line = <F>) {
- if ($line =~ /^\s*$sp\s*$/) {
- close F;
- return 1;
- }
- }
- close F;
- }
- return 0;
-}
-
-sub add_spooler_to_security_level {
- my ($spooler, $level) = @_;
- my $sp;
- $sp = (($spooler eq "lpr") || ($spooler eq "lprng")) ? "lpd" : $spooler;
- $file = "$prefix/etc/security/msec/server.$level";
- if (-f $file) {
- local *F;
- open F, ">> $file" || return 0;
- print F "$sp\n";
- close F;
- }
- return 1;
-}
-
-sub files_exist {
- my @files = @_;
- for my $file (@files) {
- return 0 if (! -f "$prefix$file"),
- }
- return 1;
-}
-
-sub set_alternative {
- my ($command, $executable) = @_;
- local *F;
- # Read the list of executables for the given command to find the number
- # of the desired executable
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "/bin/sh -c \"export LC_ALL=C; /bin/echo | update-alternatives --config $command \" |" ||
- die "Could not run \"update-alternatives\"!";
- my $choice = 0;
- while (my $line = <F>) {
- chomp $line;
- if ($line =~ m/^[\* ][\+ ]\s*([0-9]+)\s+(\S+)\s*$/) { # list entry?
- if ($2 eq $executable) {
- $choice = $1;
- last;
- }
- }
- }
- close F;
- # If the executable was found, assign the command to it
- if ($choice > 0) {
- system(($::testing ? "$prefix" : "chroot $prefix/ ") .
- "/bin/sh -c \"/bin/echo $choice | update-alternatives --config $command > /dev/null 2>&1\"");
- }
- return 1;
-}
-
-sub pdq_panic_button {
- my $setting = $_[0];
- if (-f "/usr/sbin/pdqpanicbutton") {
- run_program::rooted($prefix, "/usr/sbin/pdqpanicbutton", "--$setting")
- || die "Could not $setting PDQ panic buttons!";
- }
-}
-
-sub copy_printer_params($$) {
- my ($from, $to) = @_;
- map { $to->{$_} = $from->{$_} } grep { $_ ne 'configured' } keys %$from;
- #- avoid cycles-----------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-}
-
-sub getinfo($) {
- my ($prefix) = @_;
- my $printer = {};
- my @QUEUES;
-
- set_prefix($prefix);
-
- # Initialize $printer data structure
- resetinfo($printer);
-
- return $printer;
-}
-
-#------------------------------------------------------------------------------
-sub resetinfo($) {
- my ($printer) = @_;
- $printer->{QUEUE} = "";
- $printer->{OLD_QUEUE} = "";
- $printer->{OLD_CHOICE} = "";
- $printer->{ARGS} = "";
- $printer->{DBENTRY} = "";
- $printer->{DEFAULT} = "";
- $printer->{currentqueue} = {};
- # -check which printing system was used previously and load the information
- # -about its queues
- read_configured_queues($printer);
-}
-
-sub read_configured_queues($) {
- my ($printer) = @_;
- my @QUEUES;
- # Get the default spooler choice from the config file
- $printer->{SPOOLER} ||= get_default_spooler();
- if (!$printer->{SPOOLER}) {
- #- Find the first spooler where there are queues
- my $spooler;
- for $spooler (qw(cups pdq lprng lpd)) {
- #- poll queue info
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "foomatic-configure -P -q -s $spooler |" ||
- die "Could not run foomatic-configure";
- eval (join('',(<F>)));
- close F;
- #- Have we found queues?
- if ($#QUEUES != -1) {
- $printer->{SPOOLER} = $spooler;
- last;
- }
- }
- } else {
- #- Poll the queues of the current default spooler
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "foomatic-configure -P -q -s $printer->{SPOOLER} |" ||
- die "Could not run foomatic-configure";
- eval (join('',(<F>)));
- close F;
- }
- $printer->{configured} = {};
- my $i;
- my $N = $#QUEUES + 1;
- for ($i = 0; $i < $N; $i++) {
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}} =
- $QUEUES[$i];
- if ((!$QUEUES[$i]->{'make'}) || (!$QUEUES[$i]->{'model'})) {
- if ($printer->{SPOOLER} eq "cups") {
- $printer->{OLD_QUEUE} = $QUEUES[$i]->{'queuedata'}{'queue'};
- my $descr = get_descr_from_ppd($printer);
- $descr =~ m/^([^\|]*)\|([^\|]*)\|.*$/;
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= $1;
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= $2;
- # Read out which PPD file was originally used to set up this
- # queue
- local *F;
- if (open F, "< $prefix/etc/cups/ppd/$QUEUES[$i]->{'queuedata'}{'queue'}.ppd") {
- while (my $line = <F>) {
- if ($line =~ /^\*%MDKMODELCHOICE:(.+)$/) {
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = $1;
- }
- }
- close F;
- }
- # Mark that we have a CUPS queue but do not know the name
- # the PPD file in /usr/share/cups/model
- if (!$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'}) {
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'ppd'} = '1';
- }
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'driver'} = 'CUPS/PPD';
- $printer->{OLD_QUEUE} = "";
- # Read out the printer's options
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'} = read_cups_options($QUEUES[$i]->{'queuedata'}{'queue'});
- }
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} ||= "";
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} ||= _("Unknown model");
- } else {
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'make'} = $QUEUES[$i]->{'make'};
- $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{'model'} = $QUEUES[$i]->{'model'};
- }
- # Fill in "options" field
- if (my $args = $printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'args'}) {
- my $arg;
- my @options;
- for $arg (@{$args}) {
- push(@options, "-o");
- my $optstr = $arg->{'name'} . "=" . $arg->{'default'};
- push(@options, $optstr);
- }
- @{$printer->{configured}{$QUEUES[$i]->{'queuedata'}{'queue'}}{'queuedata'}{options}} = @options;
- }
- # Construct an entry line for tree view in main window of
- # printerdrake
- make_menuentry($printer, $QUEUES[$i]->{'queuedata'}{'queue'});
- }
-}
-
-sub make_menuentry {
- my ($printer, $queue) = @_;
- my $spooler = $shortspooler_inv{$printer->{SPOOLER}};
- my $connect = $printer->{configured}{$queue}{'queuedata'}{'connect'};
- my $localremote;
- if (($connect =~ m!^file:!) || ($connect =~ m!^ptal:/mlc:!)) {
- $localremote = _("Local Printers");
- } else {
- $localremote = _("Remote Printers");
- }
- my $make = $printer->{configured}{$queue}{'queuedata'}{'make'};
- my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
- my $connection;
- if ($connect =~ m!^file:/dev/lp(\d+)$!) {
- my $number = $1;
- $connection = _(" on parallel port \#%s", $number);
- } elsif ($connect =~ m!^file:/dev/usb/lp(\d+)$!) {
- my $number = $1;
- $connection = _(", USB printer \#%s", $number);
- } elsif ($connect =~ m!^ptal:/(.+)$!) {
- my $ptaldevice = $1;
- if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
- my $number = $1;
- $connection = _(", multi-function device on parallel port \#%s",
- $number);
- } elsif ($ptaldevice =~ /^mlc:usb:/) {
- $connection = _(", multi-function device on USB");
- } elsif ($ptaldevice =~ /^hpjd:/) {
- $connection = _(", multi-function device on HP JetDirect");
- } else {
- $connection = _(", multi-function device");
- }
- } elsif ($connect =~ m!^file:(.+)$!) {
- $connection = _(", printing to %s", $1);
- } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) {
- $connection = _("on LPD server \"%s\", printer \"%s\"", $2, $1);
- } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) {
- $connection = _(", TCP/IP host \"%s\", port %s", $1, $2);
- } elsif (($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$!) ||
- ($connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$!) ||
- ($connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!)) {
- $connection = _("on Windows server \"%s\", share \"%s\"", $1, $2);
- } elsif (($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$!) ||
- ($connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$!) ||
- ($connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!)) {
- $connection = _("on Novell server \"%s\", printer \"%s\"", $1, $2);
- } elsif ($connect =~ m!^postpipe:(.+)$!) {
- $connection = _(", using command %s", $1);
- } else {
- $connection = ($::expert ? ", URI: $connect" : "");
- }
- my $sep = "!";
- $printer->{configured}{$queue}{'queuedata'}{'menuentry'} =
- ($::expert ? "$spooler$sep" : "") .
- "$localremote$sep$queue: $make $model$connection";
-}
-
-sub read_printer_db(;$) {
-
- my $spooler = $_[0];
-
- my $dbpath = $prefix . $PRINTER_DB_FILE;
-
- local $_; #- use of while (<...
-
- local *DBPATH; #- don't have to do close ... and don't modify globals at least
- # Generate the Foomatic printer/driver overview, read it from the
- # appropriate file when it is already generated
- if (!(-f $dbpath)) {
- open DBPATH, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "foomatic-configure -O -q |" ||
- die "Could not run foomatic-configure";
- } else {
- open DBPATH, $dbpath or die "An error occurred on $dbpath : $!";
- }
-
- my $entry = {};
- my $inentry = 0;
- my $indrivers = 0;
- my $inautodetect = 0;
- while (<DBPATH>) {
- chomp;
- if ($inentry) {
- # We are inside a printer entry
- if ($indrivers) {
- # We are inside the drivers block of a printers entry
- if (m!^\s*</drivers>\s*$!) {
- # End of drivers block
- $indrivers = 0;
- } elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
- push (@{$entry->{drivers}}, $1);
- }
- } elsif ($inautodetect) {
- # We are inside the autodetect block of a printers entry
- # All entries inside this block will be ignored
- if (m!^.*</autodetect>\s*$!) {
- # End of autodetect block
- $inautodetect = 0;
- }
- } else {
- if (m!^\s*</printer>\s*$!) {
- # entry completed
- $inentry = 0;
- # Expert mode:
- # Make one database entry per driver with the entry name
- # manufacturer|model|driver
- if ($::expert) {
- my $driver;
- for $driver (@{$entry->{drivers}}) {
- my $driverstr;
- if ($driver eq "Postscript") {
- $driverstr = "PostScript";
- } else {
- $driverstr = "GhostScript + $driver";
- }
- if ($driver eq $entry->{defaultdriver}) {
- $driverstr .= " (recommended)";
- }
- $entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr";
- $entry->{driver} = $driver;
- # Duplicate contents of $entry because it is multiply entered to the database
- map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
- }
- } else {
- # Recommended mode
- # Make one entry per printer, with the recommended
- # driver (manufacturerer|model)
- $entry->{ENTRY} = "$entry->{make}|$entry->{model}";
- if ($entry->{defaultdriver}) {
- $entry->{driver} = $entry->{defaultdriver};
- map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
- }
- }
- $entry = {};
- } elsif (m!^\s*<id>\s*([^\s<>]+)\s*</id>\s*$!) {
- # Foomatic printer ID
- $entry->{printer} = $1;
- } elsif (m!^\s*<make>(.+)</make>\s*$!) {
- # Printer manufacturer
- $entry->{make} = uc($1);
- } elsif (m!^\s*<model>(.+)</model>\s*$!) {
- # Printer model
- $entry->{model} = $1;
- } elsif (m!<driver>(.+)</driver>!) {
- # Printer default driver
- $entry->{defaultdriver} = $1;
- } elsif (m!^\s*<drivers>\s*$!) {
- # Drivers block
- $indrivers = 1;
- @{$entry->{drivers}} = ();
- } elsif (m!^\s*<autodetect>\s*$!) {
- # Autodetect block
- $inautodetect = 1;
- }
- }
- } else {
- if (m!^\s*<printer>\s*$!) {
- # new entry
- $inentry = 1;
- }
- }
- }
- close DBPATH;
-
- # Add raw queue
- if ($spooler ne "pdq") {
- $entry->{ENTRY} = _("Raw printer (No driver)");
- $entry->{driver} = "raw";
- $entry->{make} = "";
- $entry->{model} = _("Unknown model");
- map { $thedb{$entry->{ENTRY}}->{$_} = $entry->{$_} } keys %$entry;
- }
-
- #- Load CUPS driver database if CUPS is used as spooler
- if (($spooler) && ($spooler eq "cups") && ($::expert)) {
-
- #&$install('cups-drivers') unless $::testing;
- #my $w;
- #if ($in) {
- # $w = $in->wait_message(_("CUPS starting"),
- # _("Reading CUPS drivers database..."));
- #}
- poll_ppd_base();
- }
-
- @entries_db_short = sort keys %printer::thedb;
- #%descr_to_db = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short;
- #%descr_to_help = map { $printer::thedb{$_}{DESCR}, $printer::thedb{$_}{ABOUT} } @entries_db_short;
- #@entry_db_description = keys %descr_to_db;
- #db_to_descr = reverse %descr_to_db;
-
-}
-
-sub read_foomatic_options ($) {
- my ($printer) = @_;
- # Generate the option data for the chosen printer/driver combo
- my $COMBODATA;
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "foomatic-configure -P -q -p $printer->{currentqueue}{'printer'}" .
- " -d $printer->{currentqueue}{'driver'}" .
- ($printer->{OLD_QUEUE} ?
- " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
- ($printer->{SPECIAL_OPTIONS} ?
- " $printer->{SPECIAL_OPTIONS}" : "")
- . " |" ||
- die "Could not run foomatic-configure";
- eval (join('',(<F>)));
- close F;
- # Return the arguments field
- return $COMBODATA->{'args'};
-}
-
-sub read_cups_options ($) {
- my ($queue_or_file) = @_;
- # Generate the option data from a CUPS PPD file/a CUPS queue
- # Use the same Perl data structure as Foomatic uses to be able to
- # reuse the dialog
- local *F;
- if ($queue_or_file =~ /.ppd.gz$/) { # compressed PPD file
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "gunzip -cd $queue_or_file | lphelp - |" || return 0;
- } else { # PPD file not compressed or queue
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "lphelp $queue_or_file |" || return 0;
- }
- my $i;
- my $j;
- my @args = ();
- my $line;
- my $inoption = 0;
- my $inchoices = 0;
-# my $innumerical = 0;
- while ($line = <F>) {
- chomp $line;
- if ($inoption) {
- if ($inchoices) {
- if ($line =~ /^\s*(\S+)\s+(\S.*)$/) {
- push(@{$args[$i]{vals}}, {});
- $j = $#{$args[$i]{vals}};
- $args[$i]{vals}[$j]{value} = $1;
- my $comment = $2;
- # Did we find the default setting?
- if ($comment =~ /default\)\s*$/) {
- $args[$i]{default} = $args[$i]{vals}[$j]{value};
- $comment =~ s/,\s*default\)\s*$//;
- } else {
- $comment =~ s/\)\s*$//;
- }
- # Remove opening paranthese
- $comment =~ s/^\(//;
- # Remove page size info
- $comment =~ s/,\s*size:\s*[0-9\.]+x[0-9\.]+in$//;
- $args[$i]{vals}[$j]{comment} = $comment;
- } elsif (($line =~ /^\s*$/) && ($#{$args[$i]{vals}} > -1)) {
- $inchoices = 0;
- $inoption = 0;
- }
-# } elsif ($innumerical == 1) {
-# if ($line =~ /^\s*The default value is ([0-9\.]+)\s*$/) {
-# $args[$i]{default} = $1;
-# $innumerical = 0;
-# $inoption = 0;
-# }
- } else {
- if ($line =~ /^\s*<choice>/) {
- $inchoices = 1;
-# } elsif ($line =~ /^\s*<value> must be a(.*) number in the range ([0-9\.]+)\.\.([0-9\.]+)\s*$/) {
-# delete($args[$i]{vals});
-# $args[$i]{min} = $2;
-# $args[$i]{max} = $3;
-# my $type = $1;
-# if ($type =~ /integer/) {
-# $args[$i]{type} = 'int';
-# } else {
-# $args[$i]{type} = 'float';
-# }
-# $innumerical = 1;
- }
- }
- } else {
- if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<choice>\s*$/) {
-# if ($line =~ /^\s*([^\s:][^:]*):\s+-o\s+([^\s=]+)=<.*>\s*$/) {
- $inoption = 1;
- push(@args, {});
- $i = $#args;
- $args[$i]{comment} = $1;
- $args[$i]{name} = $2;
- $args[$i]{type} = 'enum';
- @{$args[$i]{vals}} = ();
- }
- }
- }
- close F;
- # Return the arguments field
- return \@args;
-}
-
-#------------------------------------------------------------------------------
-
-sub read_cups_printer_list {
- my ($printer) = $_[0];
- # This function reads in a list of all printers which the local CUPS
- # daemon currently knows, including remote ones.
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "lpstat -v |" || return ();
- my @printerlist = ();
- my $line;
- while ($line = <F>) {
- if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
- my $queuename = $1;
- my $comment = "";
- if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
- (!$printer->{configured}{$queuename})) {
- $comment = _("(on %s)", $1);
- } else {
- $comment = _("(on this machine)");
- }
- push (@printerlist, "$queuename $comment");
- }
- }
- close F;
- return @printerlist;
-}
-
-sub get_cups_remote_queues {
- my ($printer) = $_[0];
- # This function reads in a list of all remote printers which the local
- # CUPS daemon knows due to broadcasting of remote servers or
- # "BrowsePoll" entries in the local /etc/cups/cupsd.conf/
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "lpstat -v |" || return ();
- my @printerlist = ();
- my $line;
- while ($line = <F>) {
- if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
- my $queuename = $1;
- my $comment = "";
- if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
- (!$printer->{configured}{$queuename})) {
- $comment = _("On CUPS server \"%s\"", $1);
- my $sep = "!";
- push (@printerlist,
- ($::expert ? _("CUPS") . $sep : "") .
- _("Remote Printers") . "$sep$queuename: $comment"
- . ($queuename eq $printer->{DEFAULT} ?
- _(" (Default)") : ("")));
- }
- }
- }
- close F;
- return @printerlist;
-}
-
-sub set_cups_autoconf {
- my $autoconf = $_[0];
-
- # Read config file
- local *F;
- my $file = "$prefix/etc/sysconfig/printing";
- if (!(-f $file)) {
- @file_content = ();
- } else {
- open F, "< $file" or die "Cannot open $file!";
- @file_content = <F>;
- close F;
- }
-
- # Remove all valid "CUPS_CONFIG" lines
- ($_ =~ /^\s*CUPS_CONFIG/ and $_="") foreach @file_content;
-
- # Insert the new "Printcap" line
- if ($autoconf) {
- push @file_content, "CUPS_CONFIG=automatic\n";
- } else {
- push @file_content, "CUPS_CONFIG=manual\n";
- }
-
- # Write back modified file
- open F, "> $file" or die "Cannot open $file!";
- print F @file_content;
- close F;
-
- # Restart CUPS
- restart_service("cups");
-
- return 1;
-}
-
-sub get_cups_autoconf {
- local *F;
- open F, ("< $prefix/etc/sysconfig/printing") || return 1;
- my $line;
- while ($line = <F>) {
- if ($line =~ m!^[^\#]*CUPS_CONFIG=manual!) {
- return 0;
- }
- }
- return 1;
-}
-
-sub set_default_printer {
- my ($printer) = $_[0];
- run_program::rooted($prefix, "foomatic-configure",
- "-D", "-q", "-s", $printer->{SPOOLER},
- "-n", $printer->{DEFAULT}) || return 0;
- return 1;
-}
-
-sub get_default_printer {
- my $printer = $_[0];
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "foomatic-configure -Q -q -s $printer->{SPOOLER} |" || return undef;
- my $line;
- while ($line = <F>) {
- if ($line =~ m!^\s*<defaultqueue>(.*)</defaultqueue>\s*$!) {
- return $1;
- }
- }
- return undef;
-}
-
-sub read_cupsd_conf {
- my @cupsd_conf;
- local *F;
-
- open F, "$prefix/etc/cups/cupsd.conf";
- @cupsd_conf = <F>;
- close F;
-
- @cupsd_conf;
-}
-sub write_cupsd_conf {
- my (@cupsd_conf) = @_;
- local *F;
-
- open F, ">$prefix/etc/cups/cupsd.conf";
- print F @cupsd_conf;
- close F;
-
- #- restart cups after updating configuration.
- restart_service("cups");
-}
-
-sub read_printers_conf {
- my ($printer) = @_;
- my $current = undef;
-
- #- read /etc/cups/printers.conf file.
- #- according to this code, we are now using the following keys for each queues.
- #- DeviceURI > lpd://printer6/lp
- #- Info > Info Text
- #- Location > Location Text
- #- State > Idle|Stopped
- #- Accepting > Yes|No
- local *PRINTERS; open PRINTERS, "$prefix/etc/cups/printers.conf" or return;
- local $_;
- while (<PRINTERS>) {
- chomp;
- /^\s*#/ and next;
- if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } }
- elsif (/\s*<\/Printer>/) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax.
- add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef }
- elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 }
- }
- close PRINTERS;
-
- #- assume this printing system.
- $printer->{SPOOLER} ||= 'cups';
-}
-
-sub get_direct_uri {
- #- get the local printer to access via a Device URI.
- my @direct_uri;
- local *F; open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/sbin/lpinfo -v |";
- local $_;
- while (<F>) {
- /^(direct|usb|serial)\s+(\S*)/ and push @direct_uri, $2;
- }
- close F;
- @direct_uri;
-}
-
-sub get_descr_from_ppd {
- my ($printer) = @_;
- my %ppd;
-
- #- if there is no ppd, this means this is a raw queue.
- local *F; open F, "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd" or return "|" . _("Unknown model");
- # "OTHERS|Generic PostScript printer|PostScript (en)";
- local $_;
- while (<F>) {
- /^\*([^\s:]*)\s*:\s*\"([^\"]*)\"/ and do { $ppd{$1} = $2; next };
- /^\*([^\s:]*)\s*:\s*([^\s\"]*)/ and do { $ppd{$1} = $2; next };
- }
- close F;
-
- my $descr = ($ppd{NickName} || $ppd{ShortNickName} || $ppd{ModelName});
- # Apply the beautifying rules of poll_ppd_base
- if ($descr =~ /Foomatic \+ Postscript/) {
- $descr =~ s/Foomatic \+ Postscript/PostScript/;
- } elsif ($descr =~ /Foomatic/) {
- $descr =~ s/Foomatic/GhostScript/;
- } elsif ($descr =~ /CUPS\+GIMP-print/) {
- $descr =~ s/CUPS\+GIMP-print/CUPS \+ GIMP-Print/;
- } elsif ($descr =~ /Series CUPS/) {
- $descr =~ s/Series CUPS/Series, CUPS/;
- } elsif (!(uc($descr) =~ /POSTSCRIPT/)) {
- $descr .= ", PostScript";
- }
-
- # Split the $descr into model and driver
- my $model;
- my $driver;
- if ($descr =~ /^([^,]+), (.*)$/) {
- $model = $1;
- $driver = $2;
- } else {
- # Some PPDs do not have the ", <driver>" part.
- $model = $descr;
- $driver = "PostScript";
- }
- my $make = $ppd{Manufacturer};
- my $lang = $ppd{LanguageVersion};
-
- # Remove manufacturer's name from the beginning of the model name
- if (($make) && ($model =~ /^$make[\s\-]+([^\s\-].*)$/)) {
- $model = $1;
- }
-
- # Put out the resulting description string
- uc($make) . '|' . $model . '|' . $driver .
- ($lang && (" (" . lc(substr($lang, 0, 2)) . ")"));
-}
-
-sub poll_ppd_base {
- #- before trying to poll the ppd database available to cups, we have to make sure
- #- the file /etc/cups/ppds.dat is no more modified.
- #- if cups continue to modify it (because it reads the ppd files available), the
- #- poll_ppd_base program simply cores :-)
- run_program::rooted($prefix, "ifconfig lo 127.0.0.1"); #- else cups will not be happy! and ifup lo don't run ?
- start_service("cups");
- my $driversthere = scalar(keys %thedb);
- foreach (1..60) {
- local *PPDS; open PPDS, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/poll_ppd_base -a |";
- local $_;
- while (<PPDS>) {
- chomp;
- my ($ppd, $mf, $descr, $lang) = split /\|/;
- if ($ppd eq "raw") {next;}
- my ($model, $driver);
- if ($descr) {
- if ($descr =~ /^([^,]+), (.*)$/) {
- $model = $1;
- $driver = $2;
- } else {
- # Some PPDs do not have the ", <driver>" part.
- $model = $descr;
- $driver = "PostScript";
- }
- }
- # Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the models
- # do not appear twice
- if ($mf eq "CANON") {
- $model =~ s/BJC\s+/BJC-/;
- }
- $ppd && $mf && $descr and do {
- my $key = "$mf|$model|$driver" . ($lang && " ($lang)");
- $thedb{$key}{ppd} = $ppd;
- $thedb{$key}{driver} = $driver;
- $thedb{$key}{make} = $mf;
- $thedb{$key}{model} = $model;
- }
- }
- close PPDS;
- scalar(keys %thedb) - $driversthere > 5 and last;
- #- we have to try again running the program, wait here a little before.
- sleep 1;
- }
-
- #scalar(keys %descr_to_ppd) > 5 or die "unable to connect to cups server";
-
-}
-
-
-
-#-******************************************************************************
-#- write functions
-#-******************************************************************************
-
-sub configure_queue($) {
- my ($printer) = @_;
- local *F;
-
- if ($printer->{currentqueue}{foomatic}) {
- #- Create the queue with "foomatic-configure", in case of queue
- #- renaming copy the old queue
- run_program::rooted($prefix, "foomatic-configure", "-q",
- "-s", $printer->{currentqueue}{'spooler'},
- "-n", $printer->{currentqueue}{'queue'},
- (($printer->{currentqueue}{'queue'} ne
- $printer->{OLD_QUEUE}) &&
- ($printer->{configured}{$printer->{OLD_QUEUE}}) ?
- ("-C", $printer->{OLD_QUEUE}) : ()),
- "-c", $printer->{currentqueue}{'connect'},
- "-p", $printer->{currentqueue}{'printer'},
- "-d", $printer->{currentqueue}{'driver'},
- "-N", $printer->{currentqueue}{'desc'},
- "-L", $printer->{currentqueue}{'loc'},
- @{$printer->{currentqueue}{options}}
- ) or die "foomatic-configure failed";
- } elsif ($printer->{currentqueue}{ppd}) {
- #- If the chosen driver is a PPD file from /usr/share/cups/model,
- #- we use lpadmin to set up the queue
- run_program::rooted($prefix, "lpadmin",
- "-p", $printer->{currentqueue}{'queue'},
-# $printer->{State} eq 'Idle' &&
-# $printer->{Accepting} eq 'Yes' ? ("-E") : (),
- "-E",
- "-v", $printer->{currentqueue}{'connect'},
- ($printer->{currentqueue}{'ppd'} ne '1') ?
- ("-m", $printer->{currentqueue}{'ppd'}) : (),
- $printer->{currentqueue}{'desc'} ?
- ("-D", $printer->{currentqueue}{'desc'}) : (),
- $printer->{currentqueue}{'loc'} ?
- ("-L", $printer->{currentqueue}{'loc'}) : (),
- @{$printer->{currentqueue}{options}}
- ) or die "lpadmin failed";
- # Add a comment line containing the path of the used PPD file to the
- # end of the PPD file
- if ($printer->{currentqueue}{'ppd'} ne '1') {
- open F, ">> $prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd";
- print F "*%MDKMODELCHOICE:$printer->{currentqueue}{'ppd'}\n";
- close F;
- }
- # Copy the old queue's PPD file to the new queue when it is renamed,
- # to conserve the option settings
- if (($printer->{currentqueue}{'queue'} ne
- $printer->{OLD_QUEUE}) &&
- ($printer->{configured}{$printer->{OLD_QUEUE}})) {
- system("echo yes | cp -f " .
- "$prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd " .
- "$prefix/etc/cups/ppd/$printer->{currentqueue}{'queue'}.ppd");
- }
- } else {
- # Raw queue
- run_program::rooted($prefix, "foomatic-configure", "-q",
- "-s", $printer->{currentqueue}{'spooler'},
- "-n", $printer->{currentqueue}{'queue'},
- "-c", $printer->{currentqueue}{'connect'},
- "-d", $printer->{currentqueue}{'driver'},
- "-N", $printer->{currentqueue}{'desc'},
- "-L", $printer->{currentqueue}{'loc'}
- ) or die "foomatic-configure failed";
- }
-
- # Make sure that queue is active
- if ($printer->{SPOOLER} ne "pdq") {
- run_program::rooted($prefix, "foomatic-printjob",
- "-s", $printer->{currentqueue}{'spooler'},
- "-C", "up", $printer->{currentqueue}{'queue'});
- }
-
- # Check whether a USB printer is configured and activate USB printing if so
- my $useUSB = 0;
- foreach (values %{$printer->{configured}}) {
- $useUSB ||= $_->{'queuedata'}{'connect'} =~ /usb/ ||
- $_->{DeviceURI} =~ /usb/;
- }
- $useUSB ||= ($printer->{currentqueue}{'queue'}{'queuedata'}{'connect'}
- =~ /usb/);
- if ($useUSB) {
- my $f = "$prefix/etc/sysconfig/usb";
- my %usb = getVarsFromSh($f);
- $usb{PRINTER} = "yes";
- setVarsInSh($f, \%usb);
- }
-
- # Open permissions for device file when PDQ is chosen as spooler
- # so normal users can print.
- if ($printer->{SPOOLER} eq 'pdq') {
- if ($printer->{currentqueue}{'connect'} =~ m!^\s*file:(\S*)\s*$!) {
- set_permissions($1,"666");
- }
- }
-
- # Make a new printer entry in the $printer structure
- $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'} =
- {};
- copy_printer_params($printer->{currentqueue},
- $printer->{configured}{$printer->{currentqueue}{'queue'}}{'queuedata'});
- # Construct an entry line for tree view in main window of
- # printerdrake
- make_menuentry($printer, $printer->{currentqueue}{'queue'});
-
- # Store the default option settings
- $printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} = {};
- if ($printer->{currentqueue}{foomatic}) {
- my $tmp = $printer->{OLD_QUEUE};
- $printer->{OLD_QUEUE} = $printer->{currentqueue}{'queue'};
- $printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} =
- read_foomatic_options($printer);
- $printer->{OLD_QUEUE} = $tmp;
- } elsif ($printer->{currentqueue}{ppd}) {
- $printer->{configured}{$printer->{currentqueue}{'queue'}}{'args'} =
- read_cups_options($printer->{currentqueue}{'queue'});
- }
- # Clean up
- delete($printer->{ARGS});
- $printer->{OLD_CHOICE} = "";
- $printer->{ARGS} = {};
- $printer->{DBENTRY} = "";
- $printer->{currentqueue} = {};
-}
-
-sub remove_queue($$) {
- my ($printer) = $_[0];
- my ($queue) = $_[1];
- run_program::rooted($prefix, "foomatic-configure", "-R", "-q",
- "-s", $printer->{SPOOLER},
- "-n", $queue);
- # Delete old stuff from data structure
- delete $printer->{configured}{$queue};
- delete($printer->{currentqueue});
- delete($printer->{ARGS});
- $printer->{OLD_CHOICE} = "";
- $printer->{ARGS} = {};
- $printer->{DBENTRY} = "";
- $printer->{currentqueue} = {};
- removeprinterfromapplications($printer, $queue);
-}
-
-sub restart_queue($) {
- my ($printer) = @_;
- my $queue = $printer->{QUEUE};
-
- # Restart the daemon(s)
- for ($printer->{SPOOLER}) {
- /cups/ && do {
- #- restart cups.
- restart_service("cups");
- last };
- /lpr|lprng/ && do {
- #- restart lpd.
- foreach (("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock")) {
- my $pidlpd = (cat_("$prefix$_"))[0];
- kill 'TERM', $pidlpd if $pidlpd;
- unlink "$prefix$_";
- }
- restart_service("lpd"); sleep 1;
- last };
- }
- # Kill the jobs
- run_program::rooted($prefix, "foomatic-printjob", "-R",
- "-s", $printer->{SPOOLER},
- "-P", $queue, "-");
-
-}
-
-sub print_pages($@) {
- my ($printer, @pages) = @_;
- my $queue = $printer->{QUEUE};
- my $lpr = "/usr/bin/foomatic-printjob";
- my $lpq = "$lpr -Q";
-
- # Print the pages
- foreach (@pages) {
- my $page = $_;
- # Only text and PostScript can be printed directly with all spoolers,
- # images must be treated seperately
- if ($page =~ /\.jpg$/) {
- system(($::testing ? "$prefix" : "chroot $prefix/ ") .
- "/usr/bin/convert $page -page 427x654+100+65 PS:- | " .
- ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "$lpr -s $printer->{SPOOLER} -P $queue");
- } else {
- run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
- "-P", $queue, $page);
- }
- }
- sleep 5; #- allow lpr to send pages.
- # Check whether the job is queued
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lpq -s $printer->{SPOOLER} -P $queue |";
- my @lpq_output =
- grep { !/^no entries/ && !(/^Rank\s+Owner/ .. /^\s*$/) } <F>;
- close F;
- @lpq_output;
-}
-
-sub lphelp_output {
- my ($printer) = @_;
- my $queue = $printer->{QUEUE};
- my $lphelp = "/usr/bin/lphelp";
-
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$lphelp $queue |";
- $helptext = join("", <F>);
- close F;
- if (!$helptext || ($helptext eq "")) {
- $helptext = "Option list not available!\n";
- }
- return $helptext;
-}
-
-sub pdqhelp_output {
- my ($printer) = @_;
- my $queue = $printer->{QUEUE};
- my $pdq = "/usr/bin/pdq";
-
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "$pdq -h -P $queue 2>&1 |";
- $helptext = join("", <F>);
- close F;
- return $helptext;
-}
-
-sub print_optionlist {
- my ($printer) = @_;
- my $queue = $printer->{QUEUE};
- my $lpr = "/usr/bin/foomatic-printjob";
-
- # Print the option list pages
- if ($printer->{configured}{$queue}{queuedata}{foomatic}) {
- run_program::rooted($prefix, $lpr, "-s", $printer->{SPOOLER},
- "-P", $queue, "-o", "docs",
- "/etc/bashrc");
- } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
- system(($::testing ? "$prefix" : "chroot $prefix/ ") .
- "/usr/bin/lphelp $queue | " .
- ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "$lpr -s $printer->{SPOOLER} -P $queue");
- }
-}
-
-# ---------------------------------------------------------------
-#
-# Spooler config stuff
-#
-# ---------------------------------------------------------------
-
-sub get_copiable_queues {
- my ($oldspooler, $newspooler) = @_;
- local $_; #- use of while (<...
-
- local *QUEUEOUTPUT; #- don't have to do close ... and don't modify globals
- #- at least
- my @queuelist; #- here we will list all Foomatic-generated queues
- # Get queue list with foomatic-configure
- open QUEUEOUTPUT, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "foomatic-configure -Q -q -s $oldspooler |" ||
- die "Could not run foomatic-configure";
-
- my $entry = {};
- my $inentry = 0;
- while (<QUEUEOUTPUT>) {
- chomp;
- if ($inentry) {
- # We are inside a queue entry
- if (m!^\s*</queue>\s*$!) {
- # entry completed
- $inentry = 0;
- if (($entry->{foomatic}) &&
- ($entry->{spooler} eq $oldspooler)) {
- # Is the connection type supported by the new
- # spooler?
- if ((($newspooler eq "cups") &&
- (($entry->{connect} =~ /^file:/) ||
- ($entry->{connect} =~ /^ptal:/) ||
- ($entry->{connect} =~ /^lpd:/) ||
- ($entry->{connect} =~ /^socket:/) ||
- ($entry->{connect} =~ /^smb:/) ||
- ($entry->{connect} =~ /^ipp:/))) ||
- ((($newspooler eq "lpd") ||
- ($newspooler eq "lprng")) &&
- (($entry->{connect} =~ /^file:/) ||
- ($entry->{connect} =~ /^ptal:/) ||
- ($entry->{connect} =~ /^lpd:/) ||
- ($entry->{connect} =~ /^socket:/) ||
- ($entry->{connect} =~ /^smb:/) ||
- ($entry->{connect} =~ /^ncp:/) ||
- ($entry->{connect} =~ /^postpipe:/))) ||
- (($newspooler eq "pdq") &&
- (($entry->{connect} =~ /^file:/) ||
- ($entry->{connect} =~ /^ptal:/) ||
- ($entry->{connect} =~ /^lpd:/) ||
- ($entry->{connect} =~ /^socket:/)))) {
- push(@queuelist, $entry->{name});
- }
- }
- $entry = {};
- } elsif (m!^\s*<name>(.+)</name>\s*$!) {
- # queue name
- $entry->{name} = $1;
- } elsif (m!^\s*<connect>(.+)</connect>\s*$!) {
- # connection type (URI)
- $entry->{connect} = $1;
- }
- } else {
- if (m!^\s*<queue\s+foomatic\s*=\s*\"?(\d+)\"?\s*spooler\s*=\s*\"?(\w+)\"?\s*>\s*$!) {
- # new entry
- $inentry = 1;
- $entry->{foomatic} = $1;
- $entry->{spooler} = $2;
- }
- }
- }
- close QUEUEOUTPUT;
-
- return @queuelist;
-}
-
-sub copy_foomatic_queue {
- my ($printer, $oldqueue, $oldspooler, $newqueue) = @_;
- run_program::rooted($prefix, "foomatic-configure", "-q",
- "-s", $printer->{SPOOLER},
- "-n", $newqueue,
- "-C", $oldspooler, $oldqueue);
-}
-
-# ------------------------------------------------------------------
-#
-# Configuration of HP multi-function devices
-#
-# ------------------------------------------------------------------
-
-sub configure_hpoj {
- my ($device, @autodetected) = @_;
- # Get the model ID as auto-detected
- $device =~ m!^/dev/\S*lp(\d+)$!;
- my $model = $1;
- my $device_ok = 1;
- foreach (@autodetected) {
- $device eq $_->{port} or next;
- $model = $_->{val}{MODEL};
- # Check if the device is really an HP multi-function device
- stop_service("hpoj");
- my $bus;
- my $address_arg = "";
- if ($device =~ /usb/) {
- $bus = "usb";
- } else {
- $bus = "par";
- $address_arg = parport_addr($device);
- }
- run_program::rooted($prefix,
- "ptal-mlcd", "$bus:probe", "-device",
- "$device", split(' ',$address_arg));
- $device_ok = 0;
- local *F;
- if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/ptal-devid mlc:$bus:probe |") {
- my $devid = join("", <F>);
- close F;
- if ($devid) {$device_ok = 1};
- }
- if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "ps auxwww | grep \"ptal-mlcd $bus:probe\" | grep -v grep | ") {
- my $line = <F>;
- if ($line =~ /^\s*\S+\s+(\d+)\s+/) {
- my $pid = $1;
- kill (15, $pid);
- }
- close F;
- }
- start_service("hpoj");
- last;
- }
- # No, it is not an HP multi-function device.
- return "" if (!$device_ok);
- #$device = "/dev/usb/lp1"; $model = "DeskJet 990C";
- # Read the HPOJ config file and check whether this device is already
- # configured
- my $deviceconfigured = 0;
- my $ptaldevice;
- my $hpoj_config = "/etc/ptal-start.conf";
- local *HPOJCONFIG;
- if (open HPOJCONFIG, ("< $prefix$hpoj_config")) {
- while ($line = <HPOJCONFIG>) {
- chomp $line;
- # Comment or blank line
- next if (($line =~ /^\s*\#/) || ($line =~ /^\s*$/));
- # Only lines beginning with "ptal-mlcd" are interesting.
- next if ($line !~ /^\s*ptal-mlcd\s+(\S+)\s+/);
- $ptaldevice = "mlc:$1";
- if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
- # Parallel device
- next if ($device =~ /usb/);
- if ($line =~ m!-device\s+$device!) {
- # Our new device is parallel and already configured
- # by the current line
- $deviceconfigured = 1;
- last;
- }
- } elsif ($ptaldevice =~ /^mlc:usb:(.+)$/) {
- # USB device
- next if ($device !~ /usb/);
- if ($line =~ /-devidmatch\s+(\"[^\"]*\")/) {
- $configuredmodel = $1;
- $configuredmodel =~ s/\"//g;
- $configuredmodel =~ s/^mdl://;
- $configuredmodel =~ s/^model://;
- $configuredmodel =~ s/;$//;
- if ($configuredmodel eq $model) {
- # Our new device is USB and already configured
- # by the current line
- $deviceconfigured = 1;
- last;
- }
- } elsif ($line =~ m!-device\s+(/dev/usb/lp\d+)!) {
- if ($1 eq $device) {
- # Our new device is USB and already configured
- # by the current line
- $deviceconfigured = 1;
- last;
- }
- }
- }
- }
- close HPOJCONFIG;
- }
-
- # It's all done for us, the device is already configured
- return $ptaldevice if $deviceconfigured;
-
- # Configure the device
- my $entry;
- if ($device =~ /usb/) {
- # USB device
- my $ptaldevicemodel = $model;
- $ptaldevicemodel =~ s/\s+/_/g;
- if ($model =~ /^\d+$/) {
- $entry = "\nptal-mlcd usb:$ptaldevicemodel -device $device \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n";
- } else {
- $entry = "\nptal-mlcd usb:$ptaldevicemodel -device /dev/usb/lp* -devidmatch \"$model;\" \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n";
- }
- $ptaldevice = "mlc:usb:$ptaldevicemodel";
- } else {
- # parallel device
- # auto-detect the parallel port addresses
- $device =~ m!^/dev/lp(\d+)$!;
- my $portnumber = $1;
- my $address_arg = parport_addr($device);
- $entry = "\nptal-mlcd par:$portnumber -device $device$address_arg \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:par:$portnumber \$PTAL_PRINTD_CMDLINE_APPEND\n";
- $ptaldevice = "mlc:par:$portnumber";
- }
-
- # Add new entry to HPOJ's config file
- open(HPOJCONFIG,">> $prefix$hpoj_config") ||
- die "Could not open $hpoj_config for writing!\n";
- print HPOJCONFIG $entry;
- close HPOJCONFIG;
- # Restart HPOJ
- restart_service("hpoj");
- # Return HPOJ device name to form the URI
- return $ptaldevice;
-}
-
-sub parport_addr{
- # auto-detect the parallel port addresses
- my ($device) = @_;
- $device =~ m!^/dev/lp(\d+)$!;
- my $portnumber = $1;
- my $parport_addresses =
- `cat /proc/sys/dev/parport/parport$portnumber/base-addr`;
- my $address_arg;
- if ($parport_addresses =~ /^\s*(\d+)\s+(\d+)\s*$/) {
- $address_arg = sprintf(" -base 0x%x -basehigh 0x%x", $1, $2);
- } elsif ($parport_addresses =~ /^\s*(\d+)\s*$/) {
- $address_arg = sprintf(" -base 0x%x", $1);
- } else {
- $address_arg = "";
- }
- return $address_arg;
-}
-
-sub config_sane {
- my ($ptaldevice) = @_;
-
- # Create config file for HP backend
- output("$prefix/etc/sane.d/hp.conf",
- "$ptaldevice\noption connect-ptal\n");
-
- # Add HP backend to /etc/sane.d/dll.conf if needed
- return if member("hp", chomp_(cat_("$prefix/etc/sane.d/dll.conf")));
- local *F;
- open F, ">> $prefix/etc/sane.d/dll.conf" or
- die "can't write SANE config in /etc/sane.d/dll.conf: $!";
- print F "hp\n";
- close F;
-}
-
-# ------------------------------------------------------------------
-#
-# Configuration of printers in Applications
-#
-# ------------------------------------------------------------------
-
-sub configureapplications {
- my ($printer) = @_;
- configurestaroffice($printer);
- configureopenoffice($printer);
-}
-
-sub addcupsremotetoapplications {
- my ($printer, $queue) = @_;
- return (addcupsremotetostaroffice($printer, $queue) &&
- addcupsremotetoopenoffice($printer, $queue));
-}
-
-sub removeprinterfromapplications {
- my ($printer, $queue) = @_;
- return (removeprinterfromstaroffice($printer, $queue) &&
- removeprinterfromopenoffice($printer, $queue));
-}
-
-sub removelocalprintersfromapplications {
- my ($printer) = @_;
- removelocalprintersfromstaroffice($printer);
- removelocalprintersfromopenoffice($printer);
-}
-
-sub configurestaroffice {
- my ($printer) = @_;
- # Do we have Star Office installed?
- my $configfilename = findsofficeconfigfile();
- return 1 if !$configfilename;
- $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
- my $configprefix = $1;
- # Load Star Office printer config file
- my $configfilecontent = readsofficeconfigfile($configfilename);
- # Update remote CUPS queues
- if (0 && ($printer->{SPOOLER} eq "cups") &&
- (-x "$prefix/usr/bin/curl")) {
- my @printerlist = getcupsremotequeues();
- for my $listentry (@printerlist) {
- next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
- my $queue = $1;
- my $server = $2;
- eval(run_program::rooted
- ($prefix, "curl", "-o", "/etc/foomatic/$queue.ppd",
- "http://$server:631/printers/$queue.ppd"));
- if (-r "$prefix/etc/foomatic/$queue.ppd") {
- $configfilecontent =
- makestarofficeprinterentry($printer, $queue,
- $configprefix,
- $configfilecontent);
- }
- }
- }
- # Update local printer queues
- for my $queue (keys(%{$printer->{configured}})) {
- # Check if we have a PPD file
- if (! -r "$prefix/etc/foomatic/$queue.ppd") {
- if (-r "$prefix/etc/cups/ppd/$queue.ppd") {
- # If we have a PPD file in the CUPS config dir, link to it
- run_program::rooted($prefix,
- "ln", "-sf",
- "/etc/cups/ppd/$queue.ppd",
- "/etc/foomatic/$queue.ppd");
- } elsif (-r "$prefix/usr/share/postscript/ppd/$queue.ppd") {
- # Check PPD directory of GPR, too
- run_program::rooted($prefix,
- "ln", "-sf",
- "/usr/share/postscript/ppd/$queue.ppd",
- "/etc/foomatic/$queue.ppd");
- } else {
- # No PPD file at all? We cannot set up this printer
- next;
- }
- }
- $configfilecontent =
- makestarofficeprinterentry($printer, $queue, $configprefix,
- $configfilecontent);
- }
- # Patch PostScript output to print Euro symbol correctly also for
- # the "Generic Printer"
- $configfilecontent = removeentry
- ("ports", "default_queue=", $configfilecontent);
- $configfilecontent = addentry
- ("ports",
- "default_queue=/usr/bin/perl -p -e \"s=16#80 /euro=16#80 /Euro=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}}",
- $configfilecontent);
- # Write back Star Office configuration file
- return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub configureopenoffice {
- my ($printer) = @_;
- # Do we have OpenOffice.org installed?
- my $configfilename = findopenofficeconfigfile();
- return 1 if !$configfilename;
- $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
- my $configprefix = $1;
- # Load OpenOffice.org printer config file
- my $configfilecontent = readsofficeconfigfile($configfilename);
- # Update remote CUPS queues
- if (0 && ($printer->{SPOOLER} eq "cups") &&
- (-x "$prefix/usr/bin/curl")) {
- my @printerlist = getcupsremotequeues();
- for my $listentry (@printerlist) {
- next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
- my $queue = $1;
- my $server = $2;
- eval(run_program::rooted
- ($prefix, "curl", "-o", "/etc/foomatic/$queue.ppd",
- "http://$server:631/printers/$queue.ppd"));
- if (-r "$prefix/etc/foomatic/$queue.ppd") {
- $configfilecontent =
- makeopenofficeprinterentry($printer, $queue,
- $configprefix,
- $configfilecontent);
- }
- }
- }
- # Update local printer queues
- for my $queue (keys(%{$printer->{configured}})) {
- # Check if we have a PPD file
- if (! -r "$prefix/etc/foomatic/$queue.ppd") {
- if (-r "$prefix/etc/cups/ppd/$queue.ppd") {
- # If we have a PPD file in the CUPS config dir, link to it
- run_program::rooted($prefix,
- "ln", "-sf",
- "/etc/cups/ppd/$queue.ppd",
- "/etc/foomatic/$queue.ppd");
- } elsif (-r "$prefix/usr/share/postscript/ppd/$queue.ppd") {
- # Check PPD directory of GPR, too
- run_program::rooted($prefix,
- "ln", "-sf",
- "/usr/share/postscript/ppd/$queue.ppd",
- "/etc/foomatic/$queue.ppd");
- } else {
- # No PPD file at all? We cannot set up this printer
- next;
- }
- }
- $configfilecontent =
- makeopenofficeprinterentry($printer, $queue, $configprefix,
- $configfilecontent);
- }
- # Patch PostScript output to print Euro symbol correctly also for
- # the "Generic Printer"
- $configfilecontent = removeentry
- ("Generic Printer", "Command=", $configfilecontent);
- $configfilecontent = addentry
- ("Generic Printer",
- "Command=/usr/bin/perl -p -e \"s=/euro /unused=/Euro /unused=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}}",
- $configfilecontent);
- # Write back OpenOffice.org configuration file
- return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub addcupsremotetostaroffice {
- my ($printer, $queue) = @_;
- # Do we have Star Office installed?
- my $configfilename = findsofficeconfigfile();
- return 1 if !$configfilename;
- $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
- my $configprefix = $1;
- # Load Star Office printer config file
- my $configfilecontent = readsofficeconfigfile($configfilename);
- # Update remote CUPS queues
- if (($printer->{SPOOLER} eq "cups") &&
- (-x "$prefix/usr/bin/curl")) {
- my @printerlist = getcupsremotequeues();
- for my $listentry (@printerlist) {
- next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
- my $q = $1;
- next if ($q ne $queue);
- my $server = $2;
- # Remove server name from queue name
- $q =~ s/^([^@]*)@.*$/$1/;
- eval(run_program::rooted
- ($prefix, "/usr/bin/curl", "-o",
- "/etc/foomatic/$queue.ppd",
- "http://$server:631/printers/$q.ppd"));
- # Does the file exist and is it not an error message?
- if ((-r "$prefix/etc/foomatic/$queue.ppd") &&
- (cat_("$prefix/etc/foomatic/$queue.ppd") =~
- /^\*PPD-Adobe/)) {
- $configfilecontent =
- makestarofficeprinterentry($printer, $queue,
- $configprefix,
- $configfilecontent);
- } else {
- return 0;
- }
- last;
- }
- }
- # Write back Star Office configuration file
- return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub addcupsremotetoopenoffice {
- my ($printer, $queue) = @_;
- # Do we have OpenOffice.org installed?
- my $configfilename = findopenofficeconfigfile();
- return 1 if !$configfilename;
- $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
- my $configprefix = $1;
- # Load OpenOffice.org printer config file
- my $configfilecontent = readsofficeconfigfile($configfilename);
- # Update remote CUPS queues
- if (($printer->{SPOOLER} eq "cups") &&
- (-x "$prefix/usr/bin/curl")) {
- my @printerlist = getcupsremotequeues();
- for my $listentry (@printerlist) {
- next if !($listentry =~ /^([^\|]+)\|([^\|]+)$/);
- my $q = $1;
- next if ($q ne $queue);
- my $server = $2;
- # Remove server name from queue name
- $q =~ s/^([^@]*)@.*$/$1/;
- eval(run_program::rooted
- ($prefix, "/usr/bin/curl", "-o",
- "/etc/foomatic/$queue.ppd",
- "http://$server:631/printers/$q.ppd"));
- # Does the file exist and is it not an error message?
- if ((-r "$prefix/etc/foomatic/$queue.ppd") &&
- (cat_("$prefix/etc/foomatic/$queue.ppd") =~
- /^\*PPD-Adobe/)) {
- $configfilecontent =
- makeopenofficeprinterentry($printer, $queue,
- $configprefix,
- $configfilecontent);
- } else {
- return 0;
- }
- }
- }
- # Write back OpenOffice.org configuration file
- return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removeprinterfromstaroffice {
- my ($printer, $queue) = @_;
- # Do we have Star Office installed?
- my $configfilename = findsofficeconfigfile();
- return 1 if !$configfilename;
- $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
- my $configprefix = $1;
- # Load Star Office printer config file
- my $configfilecontent = readsofficeconfigfile($configfilename);
- # Remove the printer entry
- $configfilecontent =
- removestarofficeprinterentry($printer, $queue, $configprefix,
- $configfilecontent);
- # Write back Star Office configuration file
- return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removeprinterfromopenoffice {
- my ($printer, $queue) = @_;
- # Do we have OpenOffice.org installed?
- my $configfilename = findopenofficeconfigfile();
- return 1 if !$configfilename;
- $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
- my $configprefix = $1;
- # Load OpenOffice.org printer config file
- my $configfilecontent = readsofficeconfigfile($configfilename);
- # Remove the printer entry
- $configfilecontent =
- removeopenofficeprinterentry($printer, $queue, $configprefix,
- $configfilecontent);
- # Write back OpenOffice.org configuration file
- return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removelocalprintersfromstaroffice {
- my ($printer) = @_;
- # Do we have Star Office installed?
- my $configfilename = findsofficeconfigfile();
- return 1 if !$configfilename;
- $configfilename =~ m!^(.*)/share/xp3/Xpdefaults$!;
- my $configprefix = $1;
- # Load Star Office printer config file
- my $configfilecontent = readsofficeconfigfile($configfilename);
- # Remove the printer entries
- for my $queue (keys(%{$printer->{configured}})) {
- $configfilecontent =
- removestarofficeprinterentry($printer, $queue, $configprefix,
- $configfilecontent);
- }
- # Write back Star Office configuration file
- return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub removelocalprintersfromopenoffice {
- my ($printer) = @_;
- # Do we have OpenOffice.org installed?
- my $configfilename = findopenofficeconfigfile();
- return 1 if !$configfilename;
- $configfilename =~ m!^(.*)/share/psprint/psprint.conf$!;
- my $configprefix = $1;
- # Load OpenOffice.org printer config file
- my $configfilecontent = readsofficeconfigfile($configfilename);
- # Remove the printer entries
- for my $queue (keys(%{$printer->{configured}})) {
- $configfilecontent =
- removeopenofficeprinterentry($printer, $queue, $configprefix,
- $configfilecontent);
- }
- # Write back OpenOffice.org configuration file
- return writesofficeconfigfile($configfilename, $configfilecontent);
-}
-
-sub makestarofficeprinterentry {
- my ($printer, $queue, $configprefix, $configfile) = @_;
- # Set default printer
- if ($queue eq $printer->{DEFAULT}) {
- $configfile = removeentry("windows", "device=", $configfile);
- $configfile = addentry("windows",
- "device=$queue,$queue PostScript,$queue",
- $configfile);
- }
- # Make an entry in the "[devices]" section
- $configfile = removeentry("devices", "$queue=", $configfile);
- $configfile = addentry("devices",
- "$queue=$queue PostScript,$queue",
- $configfile);
- # Make an entry in the "[ports]" section
- # The "perl" command patches the PostScript output to print the Euro
- # symbol correctly.
- $configfile = removeentry("ports", "$queue=", $configfile);
- $configfile = addentry("ports",
- "$queue=/usr/bin/perl -p -e \"s=16#80 /euro=16#80 /Euro=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}} -P $queue",
- $configfile);
- # Make printer's section
- $configfile = addsection("$queue,PostScript,$queue", $configfile);
- # Load PPD file
- my $ppd = cat_("$prefix/etc/foomatic/$queue.ppd");
- # Set the PostScript level
- my $pslevel;
- if ($ppd =~ /^\s*\*LanguageLevel:\s*\"?([^\s\"]+)\"?\s*$/m) {
- $pslevel = $1;
- $pslevel = "2" if $pslevel eq "3";
- } else {
- $pslevel = "2";
- }
- $configfile = removeentry("$queue.PostScript.$queue",
- "Level=", $configfile);
- $configfile = addentry("$queue.PostScript.$queue",
- "Level=$pslevel", $configfile);
- # Set Color/BW
- my $color;
- if ($ppd =~ /^\s*\*ColorDevice:\s*\"?([Tt]rue)\"?\s*$/m) {
- $color = "1";
- } else {
- $color = "0";
- }
- $configfile = removeentry("$queue.PostScript.$queue",
- "BitmapColor=", $configfile);
- $configfile = addentry("$queue.PostScript.$queue",
- "BitmapColor=$color", $configfile);
- # Set the default paper size
- if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) {
- my $papersize=$1;
- $configfile = removeentry("$queue.PostScript.$queue",
- "PageSize=", $configfile);
- $configfile = removeentry("$queue.PostScript.$queue",
- "PPD_PageSize=", $configfile);
- $configfile = addentry("$queue.PostScript.$queue",
- "PageSize=$papersize", $configfile);
- $configfile = addentry("$queue.PostScript.$queue",
- "PPD_PageSize=$papersize", $configfile);
- }
- # Link the PPD file
- run_program::rooted($prefix,
- "ln", "-sf", "/etc/foomatic/$queue.ppd",
- "$configprefix/share/xp3/ppds/$queue.PS");
- return $configfile;
-}
-
-sub makeopenofficeprinterentry {
- my ($printer, $queue, $configprefix, $configfile) = @_;
- # Make printer's section
- $configfile = addsection($queue, $configfile);
- # Load PPD file
- my $ppd = cat_("$prefix/etc/foomatic/$queue.ppd");
- # "PPD_PageSize" line
- if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) {
- my $papersize=$1;
- $configfile = removeentry($queue,
- "PPD_PageSize=", $configfile);
- $configfile = addentry($queue,
- "PPD_PageSize=$papersize", $configfile);
- }
- # "Command" line
- # The "perl" command patches the PostScript output to print the Euro
- # symbol correctly.
- $configfile = removeentry($queue, "Command=", $configfile);
- $configfile = addentry($queue,
- "Command=/usr/bin/perl -p -e \"s=/euro /unused=/Euro /unused=\" | /usr/bin/$lprcommand{$printer->{SPOOLER}} -P $queue",
- $configfile);
- # "Comment" line
- $configfile = removeentry($queue, "Comment=", $configfile);
- if (($printer->{configured}{$queue}) &&
- ($printer->{configured}{$queue}{queuedata}{desc})) {
- $configfile = addentry
- ($queue,
- "Comment=$printer->{configured}{$queue}{queuedata}{desc}",
- $configfile);
- } else {
- $configfile = addentry($queue,
- "Comment=",
- $configfile);
- }
- # "Location" line
- $configfile = removeentry($queue, "Location=", $configfile);
- if (($printer->{configured}{$queue}) &&
- ($printer->{configured}{$queue}{queuedata}{loc})) {
- $configfile = addentry
- ($queue,
- "Location=$printer->{configured}{$queue}{queuedata}{loc}",
- $configfile);
- } else {
- $configfile = addentry($queue,
- "Location=",
- $configfile);
- }
- # "DefaultPrinter" line
- $configfile = removeentry($queue, "DefaultPrinter=", $configfile);
- my $default = "0";
- if ($queue eq $printer->{DEFAULT}) {
- $default = "1";
- }
- $configfile = addentry($queue,
- "DefaultPrinter=$default",
- $configfile);
- # "Printer" line
- $configfile = removeentry($queue, "Printer=", $configfile);
- $configfile = addentry($queue,
- "Printer=$queue/$queue",
- $configfile);
- # Link the PPD file
- run_program::rooted($prefix,
- "ln", "-sf", "/etc/foomatic/$queue.ppd",
- "$configprefix/share/psprint/driver/$queue.PS");
- return $configfile;
-}
-
-sub removestarofficeprinterentry {
- my ($printer, $queue, $configprefix, $configfile) = @_;
- # Remove default printer entry
- $configfile = removeentry("windows", "device=$queue,", $configfile);
- # Remove entry in the "[devices]" section
- $configfile = removeentry("devices", "$queue=", $configfile);
- # Remove entry in the "[ports]" section
- $configfile = removeentry("ports", "$queue=", $configfile);
- # Remove "[$queue,PostScript,$queue]" section
- $configfile = removesection("$queue,PostScript,$queue", $configfile);
- # Remove Link of PPD file
- run_program::rooted($prefix,
- "rm", "-f",
- "$configprefix/share/xp3/ppds/$queue.PS");
- return $configfile;
-}
-
-sub removeopenofficeprinterentry {
- my ($printer, $queue, $configprefix, $configfile) = @_;
- # Remove printer's section
- $configfile = removesection("$queue", $configfile);
- # Remove Link of PPD file
- run_program::rooted($prefix,
- "rm", "-f",
- "$configprefix/share/psprint/driver/$queue.PS");
- return $configfile;
-}
-
-sub findsofficeconfigfile {
- my @configfilenames =
- ("/usr/lib/*/share/xp3/Xpdefaults",
- "/usr/local/lib/*/share/xp3/Xpdefaults",
- "/usr/local/*/share/xp3/Xpdefaults",
- "/opt/*/share/xp3/Xpdefaults");
- my $configfilename = "";
- for $configfilename (@configfilenames) {
- local *F;
- if (open F, "ls -r $prefix$configfilename 2> /dev/null |") {
- my $filename = <F>;
- close F;
- if ($filename) {return $filename};
- }
- }
- return "";
-}
-
-sub findopenofficeconfigfile {
- my @configfilenames =
- ("/usr/lib/*/share/psprint/psprint.conf",
- "/usr/local/lib/*/share/psprint/psprint.conf",
- "/usr/local/*/share/psprint/psprint.conf",
- "/opt/*/share/psprint/psprint.conf");
- my $configfilename = "";
- for $configfilename (@configfilenames) {
- local *F;
- if (open F, "ls -r $prefix$configfilename 2> /dev/null |") {
- my $filename = <F>;
- close F;
- if ($filename) {return $filename};
- }
- }
- return "";
-}
-
-sub readsofficeconfigfile {
- my ($file) = @_;
- local *F;
- open F, "< $prefix$file" || return "";
- my $filecontent = join("", <F>);
- close F;
- return $filecontent;
-}
-
-sub writesofficeconfigfile {
- my ($file, $filecontent) = @_;
- local *F;
- open F, "> $prefix$file" || return 0;
- print F $filecontent;
- close F;
- return 1;
-}
-
-sub getcupsremotequeues {
- # The following code reads in a list of all remote printers which the
- # local CUPS daemon knows due to broadcasting of remote servers or
- # "BrowsePoll" entries in the local /etc/cups/cupsd.conf
- local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "lpstat -v |" || return ();
- my @printerlist = ();
- my $line;
- while ($line = <F>) {
- if ($line =~ m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
- my $queuename = $1;
- if (($2 =~ m!^ipp://([^/:]+)[:/]!) &&
- (!$printer->{configured}{$queuename})) {
- my $server = $1;
- push (@printerlist, "$queuename|$server");
- }
- }
- }
- close F;
- return @printerlist;
-}
-
-sub addentry {
- my ($section, $entry, $filecontent) = @_;
- my $sectionfound = 0;
- my $entryinserted = 0;
- my @lines = split("\n", $filecontent);
- local $_;
- for (@lines) {
- if (!$sectionfound) {
- if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
- $sectionfound = 1;
- }
- } else {
- if (($_ !~ /^\s*$/) && ($_ !~ /^\s*;/)) {
- $_ = "$entry\n$_";
- $entryinserted = 1;
- last;
- }
- }
- }
- if ($sectionfound && !$entryinserted) {
- push(@lines, $entry);
- }
- return join ("\n", @lines);
-}
-
-sub addsection {
- my ($section, $filecontent) = @_;
- my $entryinserted = 0;
- my @lines = split("\n", $filecontent);
- local $_;
- for (@lines) {
- if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
- # section already there, nothing to be done
- return $filecontent;
- }
- }
- return $filecontent . "\n[$section]";
-}
-
-sub removeentry {
- my ($section, $entry, $filecontent) = @_;
- my $sectionfound = 0;
- my $done = 0;
- my @lines = split("\n", $filecontent);
- local $_;
- for (@lines) {
- $_ = "$_\n";
- next if ($done);
- if (!$sectionfound) {
- if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
- $sectionfound = 1;
- }
- } else {
- if ($_ =~ /^\s*\[.*\]\s*$/) { # Next section
- $done = 1;
- } elsif ($_ =~ /^\s*$entry/) {
- $_ = "";
- $done = 1;
- }
- }
- }
- return join ("", @lines);
-}
-
-sub removesection {
- my ($section, $filecontent) = @_;
- my $sectionfound = 0;
- my $done = 0;
- my @lines = split("\n", $filecontent);
- local $_;
- for (@lines) {
- $_ = "$_\n";
- next if ($done);
- if (!$sectionfound) {
- if ($_ =~ /^\s*\[\s*$section\s*\]\s*$/) {
- $_ = "";
- $sectionfound = 1;
- }
- } else {
- if ($_ =~ /^\s*\[.*\]\s*$/) { # Next section
- $done = 1;
- } else {
- $_ = "";
- }
- }
- }
- return join ("", @lines);
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1;
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
deleted file mode 100644
index b5a15c178..000000000
--- a/perl-install/printerdrake.pm
+++ /dev/null
@@ -1,2931 +0,0 @@
-package printerdrake;
-# $Id$
-use diagnostics;
-use strict;
-
-
-use common;
-use detect_devices;
-use modules;
-use network;
-use log;
-use printer;
-
-1;
-
-sub choose_printer_type {
- my ($printer, $in) = @_;
- $in->set_help('configurePrinterConnected') if $::isInstall;
- my $queue = $printer->{OLD_QUEUE};
- $printer->{str_type} = $printer::printer_type_inv{$printer->{TYPE}};
- $printer->{str_type} =
- $in->ask_from_list_(_("Select Printer Connection"),
- _("How is the printer connected?") .
- ($printer->{SPOOLER} eq "cups" ?
- _("
-Printers on remote CUPS servers you do not have to configure here; these printers will be automatically detected.") : ()),
- [ printer::printer_type($printer) ],
- $printer->{str_type},
- ) or return 0;
- $printer->{TYPE} = $printer::printer_type{$printer->{str_type}};
- 1;
-}
-
-sub config_cups {
- my ($printer, $in, $upNetwork) = @_;
-
- local $::isWizard = 0;
- # Check whether the network functionality is configured and
- # running
- if (!check_network($printer, $in, $upNetwork)) {return 0};
-
- $in->set_help('configureRemoteCUPSServer') if $::isInstall;
- my $queue = $printer->{OLD_QUEUE};
- #- hack to handle cups remote server printing,
- #- first read /etc/cups/cupsd.conf for variable BrowsePoll address:port
- my ($server, $port, $default, $autoconf);
- # Return value: 0 when nothing was changed ("Apply" never pressed), 1
- # when "Apply" was at least pressed once.
- my $retvalue = 0;
- # Read CUPS config file
- my @cupsd_conf = printer::read_cupsd_conf();
- foreach (@cupsd_conf) {
- /^\s*BrowsePoll\s+(\S+)/ and $server = $1, last;
- }
- $server =~ /([^:]*):(.*)/ and ($server, $port) = ($1, $2);
- #- Did we have automatic or manual configuration mode for CUPS
- $autoconf = printer::get_cups_autoconf();
- #- Remember the server/port/autoconf settings to check whether the user
- #- has changed them.
- my $oldserver = $server;
- my $oldport = $port;
- my $oldautoconf = $autoconf;
-
- #- then ask user for this combination and rewrite /etc/cups/cupsd.conf
- #- according to new settings. There are no other point where such
- #- information is written in this file.
-
- if ($in->ask_from_
- ({ title => ($::expert ? _("CUPS configuration") :
- _("Specify CUPS server")),
- messages => _("To get access to printers on remote CUPS servers in your local network you do not have to configure anything; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. When your CUPS server is not in your local network, you have to enter the CUPS server IP address and optionally the port number to get the printer information from the server, otherwise leave these fields blank.") .
- ($::expert ? "\n" . _("
-Normally, CUPS is automatically configured according to your network environment, so that you can access the printers on the CUPS servers in your local network. If this does not work correctly, turn off \"Automatic CUPS configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not forget to restart CUPS afterwards (command: \"service cups restart\").") : ()),
- callbacks => { complete => sub {
- unless (!$server || network::is_ip($server)) {
- $in->ask_warn('', _("The IP address should look like 192.168.1.20"));
- return (1,0);
- }
- if ($port !~ /^\d*$/) {
- $in->ask_warn('', _("The port number should be an integer!"));
- return (1,1);
- }
- return 0;
- } }
- },
- [
- { label => _("CUPS server IP"), val => \$server },
- { label => _("Port"), val => \$port },
- ($::expert ?
- { text => _("Automatic CUPS configuration"), type => 'bool',
- val => \$autoconf } : ()),
- ]
- )) {
- # We have clicked "OK"
- $retvalue = 1;
- # Set BrowsePoll line
- if (($server ne $oldserver) || ($port ne $oldport)) {
- $server && $port and $server = "$server:$port";
- if ($server) {
- @cupsd_conf =
- map { $server and
- s/^\s*BrowsePoll\s+(\S+)/BrowsePoll $server/ and
- $server = '';
- $_ } @cupsd_conf;
- $server and push @cupsd_conf, "\nBrowsePoll $server\n";
- } else {
- @cupsd_conf =
- map { s/^\s*BrowsePoll\s+(\S+)/\#BrowsePoll $1/;
- $_ } @cupsd_conf;
- }
- printer::write_cupsd_conf(@cupsd_conf);
- }
- # Set auto-configuration state
- if ($autoconf != $oldautoconf) {
- printer::set_cups_autoconf($autoconf);
- }
- # Save user settings for auto-install
- $printer->{BROWSEPOLLADDR} = $server;
- $printer->{BROWSEPOLLPORT} = $port;
- $printer->{MANUALCUPSCONFIG} = 1 - $autoconf;
- }
- return $retvalue;
-}
-
-sub setup_printer_connection {
- my ($printer, $in, $upNetwork) = @_;
- # Choose the appropriate connection config dialog
- my $done = 1;
- for ($printer->{TYPE}) {
- /LOCAL/ and setup_local ($printer, $in) and last;
- /LPD/ and setup_lpd ($printer, $in, $upNetwork) and last;
- /SOCKET/ and setup_socket ($printer, $in, $upNetwork) and last;
- /SMB/ and setup_smb ($printer, $in, $upNetwork) and last;
- /NCP/ and setup_ncp ($printer, $in, $upNetwork) and last;
- /URI/ and setup_uri ($printer, $in, $upNetwork) and last;
- /POSTPIPE/ and setup_postpipe ($printer, $in) and last;
- $done = 0; last;
- }
- return $done;
-}
-
-sub auto_detect {
- my ($in) = @_;
- {
- my $w = $in->wait_message(_("Test ports"), _("Detecting devices..."));
- modules::get_alias("usb-interface") and eval { modules::load("printer") };
- eval { modules::unload(qw(lp parport_pc parport_probe parport)) }; #- on kernel 2.4 parport has to be unloaded to probe again
- eval { modules::load(qw(parport_pc lp parport_probe)); }; #- take care as not available on 2.4 kernel (silent error).
- }
- my $b = before_leaving { eval { modules::unload("parport_probe") } };
- detect_devices::whatPrinter();
-}
-
-sub wizard_welcome {
- my ($printer, $in) = @_;
- my $ret;
- my $autodetect = 1;
- $autodetect = 0 if ($printer->{NOAUTODETECT});
- if ($in) {
- eval {
- if ($::expert) {
- $ret = $in->ask_okcancel
- (_("Add a new printer"),
- _("
-Welcome to the Printer Setup Wizard
-
-This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
-
-It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types."));
- } else {
- $ret = $in->ask_from_
- ({title => _("Local Printer"),
- messages => _("
-Welcome to the Printer Setup Wizard
-
-This wizard will help you to install your printer(s) connected to this computer.
-
-Please plug in your printer(s) on this computer and turn it/them on. Click on \"Next\" when you are ready, and on \"Cancel\" when you do not want to set up your printer(s) now.
-
-Note that some computers can crash during the printer auto-detection, turn off \"Auto-detect printers\" to do a printer installation without auto-detection. Use the \"Expert Mode\" of printerdrake when you want to set up printing on a remote printer if printerdrake does not list it automatically.")},
- [
- { text => _("Auto-detect printers"), type => 'bool',
- val => \$autodetect},
- ]);
- if (!$autodetect) {
- $printer->{NOAUTODETECT} = 1;
- } else {
- undef $printer->{NOAUTODETECT};
- }
- }
- };
- return ($@ =~ /wizcancel/) ? 0 : $ret;
- }
-}
-
-sub wizard_congratulations {
- my ($in) = @_;
- if ($in) {
- $in->ask_okcancel(_("Local Printer"),
- _("
-Congratulations, your printer is now installed and configured!
-
-You can print using the \"Print\" command of your application (usually in the \"File\" menu).
-
-If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the Mandrake Control Center."))
- }
-}
-
-sub setup_local {
- my ($printer, $in) = @_;
- my (@port, @str, $device);
- my $queue = $printer->{OLD_QUEUE};
- my $do_auto_detect;
- if ((!$::expert) && ($::isWizard)) {
- $do_auto_detect = !$printer->{NOAUTODETECT};
- } else {
- local $::isWizard = 0;
- my $res = $in->ask_from_list_
- (_("Auto-Detection of Printers"),
- _("Printerdrake is able to auto-detect your locally connected parallel and USB printers for you, but note that on some systems the auto-detection CAN FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON YOUR OWN RISK!
-
-Do you really want to get your printers auto-detected?"),
- [_("Do auto-detection"),
- _("Set up printer manually")],
- _("Do auto-detection"));
- $do_auto_detect = ($res eq _("Do auto-detection"));
- }
- my @parport = ();
- my $menuentries = {};
- $in->set_help('setupLocal') if $::isInstall;
- if ($do_auto_detect) {
- # When HPOJ is running, it blocks the printer ports on which it is
- # configured, so we stop it here. If it is not installed or not
- # configured, this command has no effect.
- printer::stop_service("hpoj");
- @parport = auto_detect($in);
- # We have more than one printer, so we must ask the user for a queue
- # name in the fully automatic printer configuration.
- $printer->{MORETHANONE} = ($#parport > 0);
- for my $p (@parport) {
- if ($p->{val}{DESCRIPTION}) {
- my $menustr = $p->{val}{DESCRIPTION};
- if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
- $menustr .= _(" on parallel port \#%s", $1);
- } elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
- $menustr .= _(", USB printer \#%s", $1);
- }
- if ($::expert) {
- $menustr .= " ($p->{port})";
- }
- $menuentries->{$menustr} = $p->{port};
- push @str, _("Detected %s", $menustr);
- } else {
- my $menustr;
- if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
- $menustr = _("Printer on parallel port \#%s", $1);
- } elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
- $menustr = _("USB printer \#%s", $1);
- }
- if ($::expert) {
- $menustr .= " ($p->{port})";
- }
- $menuentries->{$menustr} = $p->{port};
- }
- }
- if ($::expert) {
- @port = detect_devices::whatPrinterPort();
- for my $q (@port) {
- if (@str) {
- my $alreadyfound = 0;
- for my $p (@parport) {
- if ($p->{port} eq $q) {
- $alreadyfound = 1;
- last;
- }
- }
- if ($alreadyfound) {
- next;
- }
- }
- my $menustr;
- if ($q =~ m!^/dev/lp(\d+)$!) {
- $menustr = _("Printer on parallel port \#%s", $1);
- } elsif ($q =~ m!^/dev/usb/lp(\d+)$!) {
- $menustr = _("USB printer \#%s", $1);
- }
- if ($::expert) {
- $menustr .= " ($q)";
- }
- $menuentries->{$menustr} = $q;
- }
- }
- # We are ready with auto-detection, so we restart HPOJ here. If it
- # is not installed or not configured, this command has no effect.
- printer::start_service("hpoj");
- } else {
- # Always ask for queue name in recommended mode when no auto-
- # detection was done
- $printer->{MORETHANONE} = ($#parport > 0);
- my $m;
- for ($m = 0; $m <= 2; $m++) {
- my $menustr = _("Printer on parallel port \#%s", $m);
- if ($::expert) {
- $menustr .= " (/dev/lp$m)";
- }
- $menuentries->{$menustr} = "/dev/lp$m";
- $menustr = _("USB printer \#%s", $m);
- if ($::expert) {
- $menustr .= " (/dev/usb/lp$m)";
- }
- $menuentries->{$menustr} = "/dev/usb/lp$m";
- }
- }
- my @menuentrieslist = sort { $menuentries->{$a} cmp $menuentries->{$b} }
- keys(%{$menuentries});
- my $menuchoice = "";
- my $oldmenuchoice = "";
- if (($printer->{configured}{$queue}) &&
- ($printer->{currentqueue}{'connect'} =~ m/^file:/)) {
- # Non-HP or HP print-only device (HPOJ not used)
- $device = $printer->{currentqueue}{'connect'};
- $device =~ s/^file://;
- for my $p (keys %{$menuentries}) {
- if ($device eq $menuentries->{$p}) {
- $menuchoice = $p;
- last;
- }
- }
- } elsif (($printer->{configured}{$queue}) &&
- ($printer->{currentqueue}{'connect'} =~ m!^ptal:/mlc:!)) {
- # HP multi-function device (controlled by HPOJ)
- my $ptaldevice = $printer->{currentqueue}{'connect'};
- $ptaldevice =~ s!^ptal:/mlc:!!;
- if ($ptaldevice =~ /^par:(\d+)$/) {
- $device = "/dev/lp$1";
- for my $p (keys %{$menuentries}) {
- if ($device eq $menuentries->{$p}) {
- $menuchoice = $p;
- last;
- }
- }
- } else {
- my $make = lc($printer->{currentqueue}{'make'});
- my $model = lc($printer->{currentqueue}{'model'});
- $device = "";
- for my $p (keys %{$menuentries}) {
- my $menumakemodel = lc($p);
- if (($menumakemodel =~ /$make/) &&
- ($menumakemodel =~ /$model/)) {
- $menuchoice = $p;
- $device = $menuentries->{$p};
- last;
- }
- }
- }
- } else {
- $device = "";
- }
- if (($menuchoice eq "") && (@menuentrieslist > -1)) {
- $menuchoice = $menuentrieslist[0];
- $oldmenuchoice = $menuchoice;
- if ($device eq "") {
- $device = $menuentries->{$menuchoice};
- }
- }
- if ($in) {
- $::expert or $in->set_help('configurePrinterDev') if $::isInstall;
- if ($#menuentrieslist < 0) { # No menu entry
- # auto-detection has failed, we must do all manually
- $do_auto_detect = 0;
- $printer->{MANUAL} = 1;
- if ($::expert) {
- $device = $in->ask_from_entry
- (_("Local Printer"),
- _("No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."),
- {
- complete => sub {
- unless ($menuchoice ne "") {
- $in->ask_warn('', _("You must enter a device or file name!"));
- return (1,0);
- }
- return 0;
- }
- });
- if ($device eq "") {
- return 0;
- }
- } else {
- $in->ask_warn(_("Local Printer"),
- _("No local printer found!\n\n") .
- ($::isInstall ? _("Network printers can only be installed after the installation. Choose \"Hardware\" and then \"Printer\" in the Mandrake Control Center.") :
- _("To install network printers, click \"Cancel\", switch to the \"Expert Mode\", and click \"Add a new printer\" again.")));
- return 0;
- }
- } else {
- my $manualconf = 0;
- $manualconf = 1 if (($printer->{MANUAL}) || (!$do_auto_detect));
- if (!$in->ask_from_(
- {title => _("Local Printer"),
- messages => (($do_auto_detect ?
- ($::expert ?
- (($#menuentrieslist == 0) ?
-_("The following printer was auto-detected, if it is not the one you want to configure, enter a device name/file name in the input line") :
-_("Here is a list of all auto-detected printers. Please choose the printer you want to set up or enter a device name/file name in the input line")) :
- (($#menuentrieslist == 0) ?
-_("The following printer was auto-detected. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\".") :
-_("Here is a list of all auto-detected printers. Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."))) :
- ($::expert ?
-_("Please choose the port where your printer is connected to or enter a device name/file name in the input line") :
-_("Please choose the port where your printer is connected to."))) .
- ($::expert ?
-_(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...).") :
- ())),
- callbacks => {
- complete => sub {
- unless ($menuchoice ne "") {
- $in->ask_warn('', _("You must choose/enter a printer/device!"));
- return (1,0);
- }
- return 0;
- },
- changed => sub {
- if ($oldmenuchoice ne $menuchoice) {
- $device = $menuentries->{$menuchoice};
- $oldmenuchoice = $menuchoice;
- }
- return 0;
- }
- }},
- [
- ($::expert ?
- { val => \$device } : ()),
- { val => \$menuchoice, list => \@menuentrieslist,
- not_edit => !$::expert, format => \&translate,
- allow_empty_list => 1, type => 'list' },
- (((!$::expert) && ($do_auto_detect) && ($printer->{NEW})) ?
- { text => _("Manual configuration"), type => 'bool',
- val => \$manualconf } : ()),
- ]
- )) {
- return 0;
- }
- if ($device ne $menuentries->{$menuchoice}) {
- $menuchoice = "";
- $do_auto_detect = 0;
- }
- if ($manualconf) {
- $printer->{MANUAL} = 1;
- } else {
- undef $printer->{MANUAL};
- }
- }
- }
-
- #- Check whether the printer is an HP multi-function device and
- #- configure HPOJ if it is one
-
- my $ptaldevice = "";
- my $isHPOJ = 0;
- if (!$do_auto_detect) {
- local $::isWizard = 0;
- $isHPOJ = $in->ask_yesorno(_("Local Printer"),
- _("Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an HP LaserJet 2200?"), 0);
- }
- if (($menuchoice =~ /HP\s+OfficeJet/i) ||
- ($menuchoice =~ /HP\s+PSC/i) ||
- ($menuchoice =~ /HP\s+PhotoSmart\s+P?\s*100\D/i) ||
- ($menuchoice =~ /HP\s+PhotoSmart\s+P?\s*1315/i) ||
- ($menuchoice =~ /HP\s+LaserJet\s+1100/i) ||
- ($menuchoice =~ /HP\s+LaserJet\s+1200/i) ||
- ($menuchoice =~ /HP\s+LaserJet\s+1220/i) ||
- ($menuchoice =~ /HP\s+LaserJet\s+2200/i) ||
- ($menuchoice =~ /HP\s+LaserJet\s+3200/i) ||
- ($menuchoice =~ /HP\s+LaserJet\s+33.0/i) ||
- ($isHPOJ)) {
- # Install HPOJ package
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/sbin/ptal-mlcd
- /etc/ptal-start.conf))))) {
- my $w = $in->wait_message('', _("Installing HPOJ package..."));
- $in->do_pkgs->install('hpoj');
- }
- # Configure and start HPOJ
- my $w = $in->wait_message
- ('', _("Checking device and configuring HPOJ..."));
- $ptaldevice = printer::configure_hpoj($device, @parport);
-
- if ($ptaldevice) {
- # Configure scanning with SANE on the MF device
- if (($menuchoice =~ /HP\s+OfficeJet\s+[KVRGPD]/i) ||
- ($menuchoice =~ /HP\s+PSC\s+[579]/i)) {
- # Install SANE
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/scanimage
- /usr/bin/xscanimage
- /usr/bin/xsane
- /etc/sane.d/dll.conf),
- (printer::files_exist
- ('/usr/bin/gimp') ?
- '/usr/bin/xsane-gimp' :
- ()))))) {
- my $w = $in->wait_message
- ('', _("Installing SANE package..."));
- $in->do_pkgs->install('sane-backends', 'sane-frontends',
- 'xsane',
- if_($in->do_pkgs->is_installed
- ('gimp'),'xsane-gimp'));
- }
- # Configure the HP SANE backend
- printer::config_sane($ptaldevice);
- }
- # Inform user about how to scan with his MF device
- my $text = scanner_help($menuchoice, "ptal:/$ptaldevice");
- if ($text) {
- $in->ask_warn(_("Scanning on your HP multi-function device"),
- $text);
- }
- # make the DeviceURI from $ptaldevice.
- $printer->{currentqueue}{'connect'} = "ptal:/" . $ptaldevice;
- } else {
- # make the DeviceURI from $device.
- $printer->{currentqueue}{'connect'} = "file:" . $device;
- }
- } else {
- # make the DeviceURI from $device.
- $printer->{currentqueue}{'connect'} = "file:" . $device;
- }
-
- #- if CUPS is the spooler, make sure that CUPS knows the device
- if ($printer->{SPOOLER} eq "cups") {
- my $w = $in->wait_message
- ('', _("Making printer port available for CUPS..."));
- if ($ptaldevice eq "") {
- printer::assure_device_is_available_for_cups($device);
- } else {
- printer::assure_device_is_available_for_cups($ptaldevice);
- }
- }
-
- #- Read the printer driver database if necessary
- if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database..."));
- printer::read_printer_db($printer->{SPOOLER});
- }
-
- #- Search the database entry which matches the detected printer best
- my $descr = "";
- foreach (@parport) {
- $device eq $_->{port} or next;
- if (($_->{val}{MANUFACTURER}) && ($_->{val}{MODEL})) {
- $descr = "$_->{val}{MANUFACTURER} $_->{val}{MODEL}";
- } else {
- $descr = $_->{val}{DESCRIPTION};
- }
- # Clean up the description from noise which makes the best match
- # difficult
- $descr =~ s/\s+Inc\.//;
- $descr =~ s/\s+Corp\.//;
- $descr =~ s/\s+SA\.//;
- $descr =~ s/\s+S\.\s*A\.//;
- $descr =~ s/\s+Ltd\.//;
- $descr =~ s/\s+International//;
- $descr =~ s/\s+Int\.//;
- $descr =~ s/\s+[Ss]eries//;
- $descr =~ s/\s+\(?[Pp]rinter\)?$//;
- $printer->{DBENTRY} = "";
- for my $entry (keys(%printer::thedb)) {
- if ($entry =~ m!$descr!) {
- $printer->{DBENTRY} = $entry;
- last;
- }
- }
- if (!$printer->{DBENTRY}) {
- $printer->{DBENTRY} =
- bestMatchSentence ($descr, keys %printer::thedb);
- }
- # If the manufacturer was not guessed correctly, discard the
- # guess.
- $printer->{DBENTRY} =~ /^([^\|]+)\|/;
- my $guessedmake = lc($1);
- if (($descr !~ /$guessedmake/i) &&
- (($guessedmake ne "hp") ||
- ($descr !~ /Hewlett[\s-]+Packard/i)))
- {$printer->{DBENTRY} = ""};
- }
-
- #- Pre-fill the "Description" field with the printer's model name
- if ((!$printer->{currentqueue}{'desc'}) && ($descr)) {
- $printer->{currentqueue}{'desc'} = $descr;
- $printer->{currentqueue}{'desc'} =~ s/\|/ /g;
- }
-
- #- When we have chosen a printer here, the question whether the
- #- automatically chosen model from the database is correct, should
- #- have "This model is correct" as default answer
- delete($printer->{MANUALMODEL});
-
- 1;
-}
-
-sub setup_lpd {
- my ($printer, $in, $upNetwork) = @_;
-
- # Check whether the network functionality is configured and
- # running
- if (!check_network($printer, $in, $upNetwork)) {return 0};
-
- $in->set_help('setupLPD') if $::isInstall;
- my ($uri, $remotehost, $remotequeue);
- my $queue = $printer->{OLD_QUEUE};
- if (($printer->{configured}{$queue}) &&
- ($printer->{currentqueue}{'connect'} =~ m/^lpd:/)) {
- $uri = $printer->{currentqueue}{'connect'};
- $uri =~ m!^\s*lpd://([^/]+)/([^/]+)/?\s*$!;
- $remotehost = $1;
- $remotequeue = $2;
- } else {
- $remotehost = "";
- $remotequeue = "lp";
- }
-
- return if !$in->ask_from(_("Remote lpd Printer Options"),
-_("To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."), [
-{ label => _("Remote host name"), val => \$remotehost },
-{ label => _("Remote printer name"), val => \$remotequeue } ],
-complete => sub {
- unless ($remotehost ne "") {
- $in->ask_warn('', _("Remote host name missing!"));
- return (1,0);
- }
- unless ($remotequeue ne "") {
- $in->ask_warn('', _("Remote printer name missing!"));
- return (1,1);
- }
- return 0;
-}
- );
- #- make the DeviceURI from user input.
- $printer->{currentqueue}{'connect'} =
- "lpd://$remotehost/$remotequeue";
-
- #- LPD does not support filtered queues to a remote LPD server by itself
- #- It needs an additional program as "rlpr"
- if (($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/rlpr))))) {
- $in->do_pkgs->install('rlpr');
- }
-
- 1;
-}
-
-sub setup_smb {
- my ($printer, $in, $upNetwork) = @_;
-
- # Check whether the network functionality is configured and
- # running
- if (!check_network($printer, $in, $upNetwork)) {return 0};
-
- $in->set_help('setupSMB') if $::isInstall;
- my ($uri, $smbuser, $smbpassword, $workgroup, $smbserver, $smbserverip, $smbshare);
- my $queue = $printer->{OLD_QUEUE};
- if (($printer->{configured}{$queue}) &&
- ($printer->{currentqueue}{'connect'} =~ m/^smb:/)) {
- $uri = $printer->{currentqueue}{'connect'};
- $uri =~ m!^\s*smb://(.*)$!;
- my $parameters = $1;
- # Get the user's login and password from the URI
- if ($parameters =~ m!([^@]*)@([^@]+)!) {
- my $login = $1;
- $parameters = $2;
- if ($login =~ m!([^:]*):([^:]*)!) {
- $smbuser = $1;
- $smbpassword = $2;
- } else {
- $smbuser = $login;
- $smbpassword = "";
- }
- } else {
- $smbuser = "";
- $smbpassword = "";
- }
- # Get the workgroup, server, and share name
- if ($parameters =~ m!([^/]*)/([^/]+)/([^/]+)$!) {
- $workgroup = $1;
- $smbserver = $2;
- $smbshare = $3;
- } elsif ($parameters =~ m!([^/]+)/([^/]+)$!) {
- $workgroup = "";
- $smbserver = $1;
- $smbshare = $2;
- } else {
- die "The \"smb://\" URI must at least contain the server name and the share name!\n";
- }
- if (network::is_ip($smbserver)) {
- $smbserverip = $smbserver;
- $smbserver = "";
- }
- }
-
- return if !$in->ask_from(_("SMB (Windows 9x/NT) Printer Options"),
-_("To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information."), [
-{ label => _("SMB server host"), val => \$smbserver },
-{ label => _("SMB server IP"), val => \$smbserverip },
-{ label => _("Share name"), val => \$smbshare },
-{ label => _("User name"), val => \$smbuser },
-{ label => _("Password"), val => \$smbpassword, hidden => 1 },
-{ label => _("Workgroup"), val => \$workgroup }, ],
-complete => sub {
- unless ((network::is_ip($smbserverip)) || ($smbserverip eq "")) {
- $in->ask_warn('', _("IP address should be in format 1.2.3.4"));
- return (1,1);
- }
- unless (($smbserver ne "") || ($smbserverip ne "")) {
- $in->ask_warn('', _("Either the server name or the server's IP must be given!"));
- return (1,0);
- }
- unless ($smbshare ne "") {
- $in->ask_warn('', _("Samba share name missing!"));
- return (1,2);
- }
- unless ($smbpassword eq "") {
- local $::isWizard = 0;
- my $yes = $in->ask_yesorno(_("SECURITY WARNING!"),
-_("You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".
-
-We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
-
-Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
-
-Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.
-
-", _("Printer on remote lpd server")) .
-($::expert ?
-_("Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.
-
-", _("Enter a printer device URI")) : "") .
-_("Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
-
-Do you really want to continue setting up this printer as you are doing now?"), 0);
- return 0 if $yes;
- return (1,2);
- }
- return 0;
-}
- );
- #- make the DeviceURI from, try to probe for available variable to
- #- build a suitable URI.
- $printer->{currentqueue}{'connect'} =
- join '', ("smb://", ($smbuser && ($smbuser .
- ($smbpassword && ":$smbpassword") . "@")), ($workgroup && ("$workgroup/")),
- ($smbserver || $smbserverip), "/$smbshare");
-
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/smbclient))))) {
- $in->do_pkgs->install('samba-client');
- }
- $printer->{SPOOLER} eq 'cups' and printer::restart_queue($printer);
- 1;
-}
-
-sub setup_ncp {
- my ($printer, $in, $upNetwork) = @_;
-
- # Check whether the network functionality is configured and
- # running
- if (!check_network($printer, $in, $upNetwork)) {return 0};
-
- $in->set_help('setupNCP') if $::isInstall;
- my ($uri, $ncpuser, $ncppassword, $ncpserver, $ncpqueue);
- my $queue = $printer->{OLD_QUEUE};
- if (($printer->{configured}{$queue}) &&
- ($printer->{currentqueue}{'connect'} =~ m/^ncp:/)) {
- $uri = $printer->{currentqueue}{'connect'};
- my $parameters = $uri =~ m!^\s*ncp://(.*)$!;
- # Get the user's login and password from the URI
- if ($parameters =~ m!([^@]*)@([^@]+)!) {
- my $login = $1;
- $parameters = $2;
- if ($login =~ m!([^:]*):([^:]*)!) {
- $ncpuser = $1;
- $ncppassword = $2;
- } else {
- $ncpuser = $login;
- $ncppassword = "";
- }
- } else {
- $ncpuser = "";
- $ncppassword = "";
- }
- # Get the workgroup, server, and share name
- if ($parameters =~ m!([^/]+)/([^/]+)$!) {
- $ncpserver = $1;
- $ncpqueue = $2;
- } else {
- die "The \"ncp://\" URI must at least contain the server name and the share name!\n";
- }
- }
-
- return if !$in->ask_from(_("NetWare Printer Options"),
-_("To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."), [
-{ label => _("Printer Server"), val => \$ncpserver },
-{ label => _("Print Queue Name"), val => \$ncpqueue },
-{ label => _("User name"), val => \$ncpuser },
-{ label => _("Password"), val => \$ncppassword, hidden => 1 } ],
-complete => sub {
- unless ($ncpserver ne "") {
- $in->ask_warn('', _("NCP server name missing!"));
- return (1,0);
- }
- unless ($ncpqueue ne "") {
- $in->ask_warn('', _("NCP queue name missing!"));
- return (1,1);
- }
- return 0;
-}
- );
- # Generate the Foomatic URI
- $printer->{currentqueue}{'connect'} =
- join '', ("ncp://", ($ncpuser && ($ncpuser .
- ($ncppassword && ":$ncppassword") . "@")),
- "$ncpserver/$ncpqueue");
-
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/nprint))))) {
- $in->do_pkgs->install('ncpfs');
- }
-
- 1;
-}
-
-sub setup_socket {
- my ($printer, $in, $upNetwork) = @_;
-
- # Check whether the network functionality is configured and
- # running
- if (!check_network($printer, $in, $upNetwork)) {return 0};
-
- $in->set_help('setupSocket') if $::isInstall;
- my ($hostname, $port, $uri, $remotehost,$remoteport);
- my $queue = $printer->{OLD_QUEUE};
- if (($printer->{configured}{$queue}) &&
- ($printer->{currentqueue}{'connect'} =~ m/^socket:/)) {
- $uri = $printer->{currentqueue}{'connect'};
- ($remotehost, $remoteport) = $uri =~ m!^\s*socket://([^/:]+):([0-9]+)/?\s*$!;
- } else {
- $remotehost = "";
- $remoteport = "9100";
- }
-
- return if !$in->ask_from(_("TCP/Socket Printer Options"),
-_("To print to a TCP or socket printer, you need to provide the host name of the printer and optionally the port number. On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware."), [
-{ label => _("Printer host name"), val => \$remotehost },
-{ label => _("Port"), val => \$remoteport } ],
-complete => sub {
- unless ($remotehost ne "") {
- $in->ask_warn('', _("Printer host name missing!"));
- return (1,0);
- }
- unless ($remoteport =~ /^[0-9]+$/) {
- $in->ask_warn('', _("The port number should be an integer!"));
- return (1,1);
- }
- return 0;
-}
- );
-
- #- make the Foomatic URI
- $printer->{currentqueue}{'connect'} =
- join '', ("socket://$remotehost", $remoteport ? (":$remoteport") : ());
-
- #- LPD and LPRng need netcat ('nc') to access to socket printers
- if ((($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng'))&&
- (!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/nc))))) {
- $in->do_pkgs->install('nc');
- }
-
- 1;
-}
-
-sub setup_uri {
- my ($printer, $in, $upNetwork) = @_;
-
- $in->set_help('setupURI') if $::isInstall;
- return if !$in->ask_from(_("Printer Device URI"),
-_("You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."), [
-{ label => _("Printer Device URI"),
-val => \$printer->{currentqueue}{'connect'},
-list => [ $printer->{currentqueue}{'connect'},
- "file:/",
- "http://",
- "ipp://",
- "lpd://",
- "smb://",
- "ncp://",
- "socket://",
- "postpipe:\"\"",
- ], not_edit => 0 }, ],
-complete => sub {
- unless ($printer->{currentqueue}{'connect'} =~ /[^:]+:.+/) {
- $in->ask_warn('', _("A valid URI must be entered!"));
- return (1,0);
- }
- return 0;
-}
- );
-
- # Non-local printer, check network and abort if no network available
- if (($printer->{currentqueue}{'connect'} !~ m!^file:/!) &&
- (!check_network($printer, $in, $upNetwork))) {return 0};
-
- # If the chosen protocol needs additional software, install it.
-
- # LPD does not support filtered queues to a remote LPD server by itself
- # It needs an additional program as "rlpr"
- if (($printer->{currentqueue}{'connect'} =~ /^lpd:/) &&
- ($printer->{SPOOLER} eq 'lpd') && (!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/rlpr))))) {
- $in->do_pkgs->install('rlpr');
- }
- if (($printer->{currentqueue}{'connect'} =~ /^smb:/) &&
- (!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/smbclient))))) {
- $in->do_pkgs->install('samba-client');
- }
- if (($printer->{currentqueue}{'connect'} =~ /^ncp:/) &&
- (!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/nprint))))) {
- $in->do_pkgs->install('ncpfs');
- }
- #- LPD and LPRng need netcat ('nc') to access to socket printers
- if (($printer->{currentqueue}{'connect'} =~ /^socket:/) &&
- (($printer->{SPOOLER} eq 'lpd') || ($printer->{SPOOLER} eq 'lprng')) &&
- (!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/nc))))) {
- $in->do_pkgs->install('nc');
- }
- 1;
-}
-
-sub setup_postpipe {
- my ($printer, $in) = @_;
-
- $in->set_help('setupPostpipe') if $::isInstall;
- my $uri;
- my $commandline;
- my $queue = $printer->{OLD_QUEUE};
- if (($printer->{configured}{$queue}) &&
- ($printer->{currentqueue}{'connect'} =~ m/^postpipe:/)) {
- $uri = $printer->{currentqueue}{'connect'};
- $uri =~ m!^\s*postpipe:\"(.*)\"$!;
- $commandline = $1;
- } else {
- $commandline = "";
- }
-
- return if !$in->ask_from(_("Pipe into command"),
-_("Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."), [
-{ label => _("Command line"),
-val => \$commandline }, ],
-complete => sub {
- unless ($commandline ne "") {
- $in->ask_warn('', _("A command line must be entered!"));
- return (1,0);
- }
- return 0;
-}
-);
-
- #- make the Foomatic URI
- $printer->{currentqueue}{'connect'} = "postpipe:$commandline";
-
- 1;
-}
-
-sub choose_printer_name {
- my ($printer, $in) = @_;
- # Name, description, location
- $in->set_help('setupPrinterName') if $::isInstall;
- my $default = $printer->{currentqueue}{'queue'};
- $in->ask_from_
- (
- { title => _("Enter Printer Name and Comments"),
- #cancel => !$printer->{configured}{$queue} ? '' : _("Remove queue"),
- callbacks => { complete => sub {
- unless ($printer->{currentqueue}{'queue'} =~ /^\w+$/) {
- $in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
- return (1,0);
- }
- local $::isWizard = 0;
- if (($printer->{configured}{$printer->{currentqueue}{'queue'}})
- && ($printer->{currentqueue}{'queue'} ne $default) &&
- (!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
- $printer->{currentqueue}{'queue'}),
- 0))) {
- return (1,0); # Let the user correct the name
- }
- return 0;
- },
- },
- messages =>
-_("Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users.") },
- [ { label => _("Name of printer"), val => \$printer->{currentqueue}{'queue'} },
- { label => _("Description"), val => \$printer->{currentqueue}{'desc'} },
- { label => _("Location"), val => \$printer->{currentqueue}{'loc'} },
- ]) or return 0;
-
- $printer->{QUEUE} = $printer->{currentqueue}{'queue'};
- 1;
-}
-
-sub get_db_entry {
- my ($printer, $in) = @_;
- #- Read the printer driver database if necessary
- if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database..."));
- printer::read_printer_db($printer->{SPOOLER});
- }
- my $w = $in->wait_message('', _("Preparing printer database..."));
- my $queue = $printer->{OLD_QUEUE};
- if ($printer->{configured}{$queue}) {
- # The queue was already configured
- if ($printer->{configured}{$queue}{'queuedata'}{'foomatic'}) {
- # The queue was configured with Foomatic
- my $driverstr;
- if ($printer->{configured}{$queue}{'queuedata'}{'driver'} eq "Postscript") {
- $driverstr = "PostScript";
- } else {
- $driverstr = "GhostScript + $printer->{configured}{$queue}{'queuedata'}{'driver'}";
- }
- my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
- my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
- if ($::expert) {
- $printer->{DBENTRY} = "$make|$model|$driverstr";
- # database key contains the "(recommended)" for the
- # recommended driver, so add it if necessary
- if (!($printer::thedb{$printer->{DBENTRY}}{printer})) {
- $printer->{DBENTRY} .= " (recommended)";
- }
- } else {
- $printer->{DBENTRY} = "$make|$model";
- }
- $printer->{OLD_CHOICE} = $printer->{DBENTRY};
- } elsif (($printer->{SPOOLER} eq "cups") && ($::expert) &&
- ($printer->{configured}{$queue}{'queuedata'}{'ppd'})) {
- # Do we have a native CUPS driver or a PostScript PPD file?
- $printer->{DBENTRY} = printer::get_descr_from_ppd($printer) || $printer->{DBENTRY};
- $printer->{OLD_CHOICE} = $printer->{DBENTRY};
- } else {
- # Point the list cursor at least to manufacturer and model of the
- # printer
- $printer->{DBENTRY} = "";
- my $make = uc($printer->{configured}{$queue}{'queuedata'}{'make'});
- my $model = $printer->{configured}{$queue}{'queuedata'}{'model'};
- my $key;
- for $key (keys %printer::thedb) {
- if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
- ((!$::expert) && ($key =~ /^$make\|$model$/))) {
- $printer->{DBENTRY} = $key;
- }
- }
- if ($printer->{DBENTRY} eq "") {
- # Exact match of make and model did not work, try to clean
- # up the model name
- $model =~ s/PS//;
- $model =~ s/PostScript//;
- $model =~ s/Series//;
- for $key (keys %printer::thedb) {
- if ((($::expert) && ($key =~ /^$make\|$model\|.*\(recommended\)$/)) ||
- ((!$::expert) && ($key =~ /^$make\|$model$/))) {
- $printer->{DBENTRY} = $key;
- }
- }
- }
- if (($printer->{DBENTRY} eq "") && ($make ne "")) {
- # Exact match with cleaned-up model did not work, try a best match
- my $matchstr = "$make|$model";
- $printer->{DBENTRY} = bestMatchSentence($matchstr, keys %printer::thedb);
- # If the manufacturer was not guessed correctly, discard the
- # guess.
- $printer->{DBENTRY} =~ /^([^\|]+)\|/;
- my $guessedmake = lc($1);
- if (($matchstr !~ /$guessedmake/i) &&
- (($guessedmake ne "hp") ||
- ($matchstr !~ /Hewlett[\s-]+Packard/i)))
- {$printer->{DBENTRY} = ""};
- }
- # Set the OLD_CHOICE to a non-existing value
- $printer->{OLD_CHOICE} = "XXX";
- }
- } else {
- if (($::expert) && ($printer->{DBENTRY} !~ /(recommended)/)) {
- my ($make, $model) = $printer->{DBENTRY} =~ /^([^\|]+)\|([^\|]+)\|/;
- for my $key (keys %printer::thedb) {
- if ($key =~ /^$make\|$model\|.*\(recommended\)$/) {
- $printer->{DBENTRY} = $key;
- }
- }
- }
- $printer->{OLD_CHOICE} = $printer->{DBENTRY};
- }
-}
-
-sub is_model_correct {
- my ($printer, $in) = @_;
- $in->set_help('chooseModel') if $::isInstall;
- my $dbentry = $printer->{DBENTRY};
- $dbentry =~ s/\|/ /g;
- my $res = $in->ask_from_list_
- (_("Your printer model"),
- _("Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.
-
-For your printer Printerdrake has found:
-
-%s", $dbentry),
- [_("The model is correct"),
- _("Select model manually")],
- ($printer->{MANUALMODEL} ? _("Select model manually") :
- _("The model is correct")));
- return 0 if !$res;
- $printer->{MANUALMODEL} = ($res eq _("Select model manually"));
- 1;
-}
-
-sub choose_model {
- my ($printer, $in) = @_;
- $in->set_help('chooseModel') if $::isInstall;
- #- Read the printer driver database if necessary
- if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database..."));
- printer::read_printer_db($printer->{SPOOLER});
- }
- if (!$printer::thedb{$printer->{DBENTRY}}) {
- $printer->{DBENTRY} = _("Raw printer (No driver)");
- }
- # Choose the printer/driver from the list
- return ($printer->{DBENTRY} = $in->ask_from_treelist(_("Printer model selection"),
- _("Which printer model do you have?") .
- _("
-
-Please check whether Printerdrake did the auto-detection of your printer model correctly. Search the correct model in the list when the cursor is standing on a wrong model or on \"Raw printer\".") . " " .
-_("If your printer is not listed, choose a compatible (see printer manual) or a similar one."), '|',
- [ keys %printer::thedb ], $printer->{DBENTRY}));
-
-}
-
-sub get_printer_info {
- my ($printer, $in) = @_;
- #- Read the printer driver database if necessary
- #if ((keys %printer::thedb) == 0) {
- # my $w = $in->wait_message('', _("Reading printer database..."));
- # printer::read_printer_db($printer->{SPOOLER});
- #}
- my $queue = $printer->{OLD_QUEUE};
- my $oldchoice = $printer->{OLD_CHOICE};
- my $newdriver = 0;
- if ((!$printer->{configured}{$queue}) || # New queue or
- (($oldchoice) && ($printer->{DBENTRY}) && # make/model/driver changed
- (($oldchoice ne $printer->{DBENTRY}) ||
- ($printer->{currentqueue}{'driver'} ne
- $printer::thedb{$printer->{DBENTRY}}{'driver'})))) {
- delete($printer->{currentqueue}{printer});
- delete($printer->{currentqueue}{ppd});
- $printer->{currentqueue}{foomatic} = 0;
- # Read info from printer database
- foreach (qw(printer ppd driver make model)) { #- copy some parameter, shorter that way...
- $printer->{currentqueue}{$_} = $printer::thedb{$printer->{DBENTRY}}{$_};
- }
- $newdriver = 1;
- }
- # Use the "printer" and not the "foomatic" field to identify a Foomatic
- # queue because in a new queue "foomatic" is not set yet.
- if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
- ($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
- if ($printer->{currentqueue}{'printer'}) { # Foomatic queue?
- # In case of a new queue "foomatic" was not set yet
- $printer->{currentqueue}{'foomatic'} = 1;
- # Now get the options for this printer/driver combo
- if (($printer->{configured}{$queue}) && ($printer->{configured}{$queue}{'queuedata'}{'foomatic'})) {
- # The queue was already configured with Foomatic ...
- if (!$newdriver) {
- # ... and the user didn't change the printer/driver
- $printer->{ARGS} = $printer->{configured}{$queue}{'args'};
- } else {
- # ... and the user has chosen another printer/driver
- $printer->{ARGS} = printer::read_foomatic_options($printer);
- }
- } else {
- # The queue was not configured with Foomatic before
- # Set some special options
- $printer->{SPECIAL_OPTIONS} = '';
- # Default page size depending on the country/language
- # (US/Canada -> Letter, Others -> A4)
- my $pagesize;
- if ($printer->{PAPERSIZE}) {
- $printer->{SPECIAL_OPTIONS} .=
- " -o PageSize=$printer->{PAPERSIZE}";
- } elsif (($pagesize = $in->{lang}) ||
- ($pagesize = $ENV{'LC_PAPER'}) ||
- ($pagesize = $ENV{'LANG'}) ||
- ($pagesize = $ENV{'LANGUAGE'}) ||
- ($pagesize = $ENV{'LC_ALL'})) {
- if (($pagesize =~ /^en_CA/) ||
- ($pagesize =~ /^fr_CA/) ||
- ($pagesize =~ /^en_US/)) {
- $pagesize = "Letter";
- } else {
- $pagesize = "A4";
- }
- $printer->{SPECIAL_OPTIONS} .=
- " -o PageSize=$pagesize";
- }
- # oki4w driver -> OKI winprinter which needs the
- # oki4daemon to work
- if ($printer->{currentqueue}{'driver'} eq 'oki4w') {
- if ($printer->{currentqueue}{'connect'} ne
- 'file:/dev/lp0') {
- $in->ask_warn(_("OKI winprinter configuration"),
- _("You are configuring an OKI laser winprinter. These printers\nuse a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."));
- }
- $printer->{currentqueue}{'connect'} = 'file:/dev/null';
- # Start the oki4daemon
- printer::start_service_on_boot('oki4daemon');
- printer::start_service('oki4daemon');
- # Set permissions
- if ($printer->{SPOOLER} eq 'cups') {
- printer::set_permissions('/dev/oki4drv', '660', 'lp',
- 'sys');
- } elsif ($printer->{SPOOLER} eq 'pdq') {
- printer::set_permissions('/dev/oki4drv', '666');
- } else {
- printer::set_permissions('/dev/oki4drv', '660', 'lp',
- 'lp');
- }
- } elsif ($printer->{currentqueue}{'driver'} eq 'lexmarkinkjet') {
- # Set "Port" option
- if ($printer->{currentqueue}{'connect'} eq
- 'file:/dev/lp0') {
- $printer->{SPECIAL_OPTIONS} .=
- " -o Port=ParPort1";
- } elsif ($printer->{currentqueue}{'connect'} eq
- 'file:/dev/lp1') {
- $printer->{SPECIAL_OPTIONS} .=
- " -o Port=ParPort2";
- } elsif ($printer->{currentqueue}{'connect'} eq
- 'file:/dev/lp2') {
- $printer->{SPECIAL_OPTIONS} .=
- " -o Port=ParPort3";
- } elsif ($printer->{currentqueue}{'connect'} eq
- 'file:/dev/usb/lp0') {
- $printer->{SPECIAL_OPTIONS} .=
- " -o Port=USB1";
- } elsif ($printer->{currentqueue}{'connect'} eq
- 'file:/dev/usb/lp1') {
- $printer->{SPECIAL_OPTIONS} .=
- " -o Port=USB2";
- } elsif ($printer->{currentqueue}{'connect'} eq
- 'file:/dev/usb/lp2') {
- $printer->{SPECIAL_OPTIONS} .=
- " -o Port=USB3";
- } else {
- $in->ask_warn(_("Lexmark inkjet configuration"),
- _("The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."));
- return 0;
- }
- # Set device permissions
- $printer->{currentqueue}{'connect'} =~ /^\s*file:(\S*)\s*$/;
- if ($printer->{SPOOLER} eq 'cups') {
- printer::set_permissions($1, '660', 'lp', 'sys');
- } elsif ($printer->{SPOOLER} eq 'pdq') {
- printer::set_permissions($1, '666');
- } else {
- printer::set_permissions($1, '660', 'lp', 'lp');
- }
- # This is needed to have the device not blocked by the
- # spooler backend.
- $printer->{currentqueue}{'connect'} = 'file:/dev/null';
- #install packages
- my $drivertype = $printer->{currentqueue}{'model'};
- if ($drivertype eq 'Z22') {$drivertype = 'Z32';}
- if ($drivertype eq 'Z23') {$drivertype = 'Z33';}
- $drivertype = lc($drivertype);
- if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
- eval { $in->do_pkgs->install("lexmark-drivers-$drivertype") };
- }
- if (!printer::files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
- # Driver installation failed, probably we do not have
- # the commercial CDs
- $in->ask_warn(_("Lexmark inkjet configuration"),
- _("To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Go to the US site and click on the \"Drivers\" button. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."));
- }
- }
- $printer->{ARGS} = printer::read_foomatic_options($printer);
- delete($printer->{SPECIAL_OPTIONS});
- }
- } elsif ($printer->{currentqueue}{'ppd'}) { # CUPS+PPD queue?
- # If we had a Foomatic queue before, unmark the flag and initialize
- # the "printer" and "driver" fields
- $printer->{currentqueue}{'foomatic'} = 0;
- $printer->{currentqueue}{'printer'} = undef;
- $printer->{currentqueue}{'driver'} = "CUPS/PPD";
- # Now get the options from this PPD file
- if ($printer->{configured}{$queue}) {
- # The queue was already configured
- if ((!$printer->{DBENTRY}) || (!$oldchoice) ||
- ($printer->{DBENTRY} eq $oldchoice)) {
- # ... and the user didn't change the printer/driver
- $printer->{ARGS} = printer::read_cups_options($queue);
- } else {
- # ... and the user has chosen another printer/driver
- $printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
- }
- } else {
- # The queue was not configured before
- $printer->{ARGS} = printer::read_cups_options("/usr/share/cups/model/$printer->{currentqueue}{ppd}");
- }
- }
- }
- 1;
-}
-
-sub setup_options {
- my ($printer, $in) = @_;
- my @simple_options =
- ("PageSize", # Media properties
- "MediaType",
- "Form",
- "InputSlot", # Trays
- "Tray",
- "OutBin",
- "OutputBin",
- "FaceUp",
- "FaceDown",
- "Collate",
- "Manual",
- "ManualFeed",
- "Manualfeed",
- "ManualFeeder",
- "Feeder",
- "Duplex", # Double-sided printing
- "Binding",
- "Tumble",
- "DoubleSided",
- "Resolution", # Resolution/Quality
- "GSResolution",
- "JCLResolution",
- "Quality",
- "PrintQuality",
- "PrintoutQuality",
- "QualityType",
- "ImageType",
- "stpImageType",
- "InkType", # Colour/Gray/BW, 4-ink/6-ink
- "stpInkType",
- "Mode",
- "OutputMode",
- "OutputType",
- "ColorMode",
- "ColorModel",
- "PrintingMode",
- "Monochrome",
- "BlackOnly",
- "Grayscale",
- "GrayScale",
- "Colour",
- "Color",
- "Gamma", # Lighter/Darker
- "GammaCorrection",
- "GammaGeneral",
- "MasterGamma",
- "StpGamma",
- "stpGamma",
- "EconoMode", # Ink/Toner saving
- "Economode",
- "TonerSaving",
- "JCLEconomode",
- "HPNup", # Other useful options
- "InstalledMemory", # Laser printer hardware config
- "Option1",
- "Option2",
- "Option3",
- "Option4",
- "Option5",
- "Option6",
- "Option7",
- "Option8",
- "Option9",
- "Option10",
- "Option11",
- "Option12",
- "Option13",
- "Option14",
- "Option15",
- "Option16",
- "Option17",
- "Option18",
- "Option19",
- "Option20",
- "Option21",
- "Option22",
- "Option23",
- "Option24",
- "Option25",
- "Option26",
- "Option27",
- "Option28",
- "Option29",
- "Option30"
- );
- $in->set_help('setupOptions') if $::isInstall;
- if (($printer->{currentqueue}{'printer'}) || # We have a Foomatic queue
- ($printer->{currentqueue}{'ppd'})) { # We have a CUPS+PPD queue
- # Set up the widgets for the option dialog
- my @widgets;
- my @userinputs;
- my @choicelists;
- my @shortchoicelists;
- my $i;
- for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
- my $optshortdefault = $printer->{ARGS}[$i]{'default'};
- if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
- # enumerated option
- push(@choicelists, []);
- push(@shortchoicelists, []);
- my $choice;
- for $choice (@{$printer->{ARGS}[$i]{'vals'}}) {
- push(@{$choicelists[$i]}, $choice->{'comment'});
- push(@{$shortchoicelists[$i]}, $choice->{'value'});
- if ($choice->{'value'} eq $optshortdefault) {
- push(@userinputs, $choice->{'comment'});
- }
- }
- push(@widgets,
- { label => $printer->{ARGS}[$i]{'comment'},
- val => \$userinputs[$i],
- not_edit => 1,
- list => \@{$choicelists[$i]},
- advanced => !member($printer->{ARGS}[$i]{'name'},
- @simple_options) });
- } elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
- # boolean option
- push(@choicelists, [$printer->{ARGS}[$i]{'name'},
- $printer->{ARGS}[$i]{'name_false'}]);
- push(@shortchoicelists, []);
- push(@userinputs, $choicelists[$i][1-$optshortdefault]);
- push(@widgets,
- { label => $printer->{ARGS}[$i]{'comment'},
- val => \$userinputs[$i],
- not_edit => 1,
- list => \@{$choicelists[$i]},
- advanced => !member($printer->{ARGS}[$i]{'name'},
- @simple_options) });
- } else {
- # numerical option
- push(@choicelists, []);
- push(@shortchoicelists, []);
- push(@userinputs, $optshortdefault);
- push(@widgets,
- { label => $printer->{ARGS}[$i]{'comment'} .
- " ($printer->{ARGS}[$i]{'min'}... " .
- "$printer->{ARGS}[$i]{'max'})",
- #type => 'range',
- #min => $printer->{ARGS}[$i]{'min'},
- #max => $printer->{ARGS}[$i]{'max'},
- val => \$userinputs[$i],
- advanced => !member($printer->{ARGS}[$i]{'name'},
- @simple_options) });
- }
- }
- # Show the options dialog. The call-back function does a
- # range check of the numerical options.
- my $windowtitle = "$printer->{currentqueue}{'make'} $printer->{currentqueue}{'model'}";
- if ($::expert) {
- my $driver = undef;
- if ($driver = $printer->{currentqueue}{driver}) {
- if ($printer->{currentqueue}{foomatic}) {
- if ($driver eq 'Postscript') {
- $driver = "PostScript";
- } else {
- $driver = "GhostScript + $driver";
- }
- } elsif ($printer->{currentqueue}{ppd}) {
- if ($printer->{DBENTRY}) {
- $printer->{DBENTRY} =~ /^[^\|]*\|[^\|]*\|(.*)$/;
- $driver = $1;
- } else {
- $driver = printer::get_descr_from_ppd($printer);
- if ($driver =~ /^[^\|]*\|[^\|]*$/) { # No driver info
- $driver = "CUPS/PPD";
- } else {
- $driver =~ /^[^\|]*\|[^\|]*\|(.*)$/;
- $driver = $1;
- }
- }
- }
- }
- if ($driver) {
- $windowtitle .= ", $driver";
- }
- }
- # Do not show the options setup dialog when installing a new printer
- # in recommended mode without "Manual configuration" turned on.
- if ((!$printer->{NEW}) or ($::expert) or ($printer->{MANUAL})) {
- return 0 if !$in->ask_from
- ($windowtitle,
- _("Printer default settings
-
-You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower."),
- \@widgets,
- complete => sub {
- my $i;
- for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
- if (($printer->{ARGS}[$i]{'type'} eq 'int') || ($printer->{ARGS}[$i]{'type'} eq 'float')) {
- unless (($printer->{ARGS}[$i]{'type'} ne 'int') || ($userinputs[$i] =~ /^[\-\+]?[0-9]+$/)) {
- $in->ask_warn('', _("Option %s must be an integer number!", $printer->{ARGS}[$i]{'comment'}));
- return (1, $i);
- }
- unless (($printer->{ARGS}[$i]{'type'} ne 'float') || ($userinputs[$i] =~ /^[\-\+]?[0-9\.]+$/)) {
- $in->ask_warn('', _("Option %s must be a number!", $printer->{ARGS}[$i]{'comment'}));
- return (1, $i);
- }
- unless (($userinputs[$i] >= $printer->{ARGS}[$i]{'min'}) &&
- ($userinputs[$i] <= $printer->{ARGS}[$i]{'max'})) {
- $in->ask_warn('', _("Option %s out of range!", $printer->{ARGS}[$i]{'comment'}));
- return (1, $i);
- }
- }
- }
- return (0);
- } );
- }
- # Read out the user's choices and generate the appropriate command
- # line arguments
- @{$printer->{currentqueue}{options}} = ();
- for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
- push(@{$printer->{currentqueue}{options}}, "-o");
- if ($printer->{ARGS}[$i]{'type'} eq 'enum') {
- # enumerated option
- my $j;
- for ($j = 0; $j <= $#{$choicelists[$i]}; $j++) {
- if ($choicelists[$i][$j] eq $userinputs[$i]) {
- push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=". $shortchoicelists[$i][$j]);
- }
- }
- } elsif ($printer->{ARGS}[$i]{'type'} eq 'bool') {
- # boolean option
- push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=".
- (($choicelists[$i][0] eq $userinputs[$i]) ? "1" : "0"));
- } else {
- # numerical option
- push(@{$printer->{currentqueue}{options}}, $printer->{ARGS}[$i]{'name'} . "=" . $userinputs[$i]);
- }
- }
- }
- 1;
-}
-
-sub setasdefault {
- my ($printer, $in) = @_;
- $in->set_help('setupAsDefault') if $::isInstall;
- if (($printer->{DEFAULT} eq '') || # We have no default printer,
- # so set the current one as default
- ($in->ask_yesorno('', _("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 0))) { # Ask the user
- $printer->{DEFAULT} = $printer->{QUEUE};
- printer::set_default_printer($printer);
- }
-}
-
-sub print_testpages {
- my ($printer, $in, $upNetwork) = @_;
- $in->set_help('printTestPages') if $::isInstall;
- # print test pages
- my $standard = 1;
- my $altletter = 0;
- my $alta4 = 0;
- my $photo = 0;
- my $ascii = 0;
- my $res2 = 0;
- my $res1 = $in->ask_from_
- ({ title => _("Test pages"),
- messages => _("Please select the test pages you want to print.
-Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."),
- cancel => ((!$printer->{NEW}) ?
- _("Cancel") : ($::isWizard ? _("<- Previous") :
- _("No test pages"))),
- ok => ($::isWizard ? _("Next ->") : _("Print"))},
- [
- { text => _("Standard test page"), type => 'bool',
- val => \$standard },
- ($::expert ?
- { text => _("Alternative test page (Letter)"), type => 'bool',
- val => \$altletter } : ()),
- ($::expert ?
- { text => _("Alternative test page (A4)"), type => 'bool',
- val => \$alta4 } : ()),
- { text => _("Photo test page"), type => 'bool', val => \$photo },
- #{ text => _("Plain text test page"), type => 'bool',
- # val => \$ascii }
- ($::isWizard ?
- { text => _("Do not print any test page"), type => 'bool',
- val => \$res2 } : ())
- ]);
- $res2 = 1 if (!($standard || $altletter || $alta4 || $photo ||
- $ascii));
- if ($res1 && !$res2) {
- my @lpq_output;
- {
- my $w = $in->wait_message('', _("Printing test page(s)..."));
-
- $upNetwork and do { &$upNetwork(); undef $upNetwork; sleep(1) };
- my $stdtestpage = "/usr/share/printer-testpages/testprint.ps";
- my $altlttestpage = "/usr/share/printer-testpages/testpage.ps";
- my $alta4testpage = "/usr/share/printer-testpages/testpage-a4.ps";
- my $phototestpage = "/usr/share/printer-testpages/photo-testpage.jpg";
- my $asciitestpage = "/usr/share/printer-testpages/testpage.asc";
- my @testpages;
- # Install the filter to convert the photo test page to PS
- if (($photo) && (!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/convert))))) {
- $in->do_pkgs->install('ImageMagick');
- }
- # set up list of pages to print
- $standard && push (@testpages, $stdtestpage);
- $altletter && push (@testpages, $altlttestpage);
- $alta4 && push (@testpages, $alta4testpage);
- $photo && push (@testpages, $phototestpage);
- $ascii && push (@testpages, $asciitestpage);
- # print the stuff
- @lpq_output = printer::print_pages($printer, @testpages);
- }
- my $dialogtext;
- if (@lpq_output) {
- $dialogtext = _("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.
-Printing status:\n%s\n\n", @lpq_output);
- } else {
- $dialogtext = _("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.\n");
- }
- if ($printer->{NEW} == 0) {
- $in->ask_warn('',$dialogtext);
- return 1;
- } else {
- $in->ask_yesorno('',$dialogtext . _("Did it work properly?"), 1)
- and return 1;
- }
- } else {
- return ($::isWizard ? $res1 : 1) ;
- }
- return 2;
-}
-
-sub printer_help {
- my ($printer, $in) = @_;
- my $spooler = $printer->{SPOOLER};
- my $queue = $printer->{QUEUE};
- my $default = $printer->{DEFAULT};
- my $raw = 0;
- my $cupsremote = 0;
- my $scanning = "";
- if ($printer->{configured}{$queue}) {
- if (($printer->{configured}{$queue}{'queuedata'}{'model'} eq
- _("Unknown model")) ||
- ($printer->{configured}{$queue}{'queuedata'}{'model'} eq
- _("Raw printer"))) {
- $raw = 1;
- }
- # Information about scanning with HP's multi-function devices
- $scanning = scanner_help
- ($printer->{configured}{$queue}{'queuedata'}{'make'} . " " .
- $printer->{configured}{$queue}{'queuedata'}{'model'},
- $printer->{configured}{$queue}{'queuedata'}{'connect'});
- if ($scanning) {
- $scanning = "\n\n$scanning\n\n";
- }
- } else {
- $cupsremote = 1;
- }
-
- my $dialogtext;
- if ($spooler eq "cups") {
- $dialogtext =
-_("To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-(!$cupsremote ?
- _("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s
-
-", $scanning) . printer::lphelp_output($printer) : $scanning .
- _("Here is a list of the available printing options for the current printer:
-
-") . printer::lphelp_output($printer)) : $scanning);
- } elsif ($spooler eq "lprng") {
- $dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -Z option=setting -Z switch" : "lpr -Z option=setting -Z switch")) .
-_("To get a list of the options available for the current printer click on the \"Print option list\" button." . $scanning) : $scanning);
- } elsif ($spooler eq "lpd") {
- $dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-_("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-_("To get a list of the options available for the current printer click on the \"Print option list\" button." . $scanning) : $scanning);
- } elsif ($spooler eq "pdq") {
- $dialogtext =
-_("To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".
-", ($queue ne $default ? "pdq -P $queue" : "pdq"), ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-_("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-_("You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.
-If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
-") .
-(!$raw ?
-_("
-The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".
-", "pdq", "lpr", ($queue ne $default ? "pdq -P $queue -aoption=setting -oswitch" : "pdq -aoption=setting -oswitch")) .
-_("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s
-
-", $scanning) . printer::pdqhelp_output($printer) : $scanning);
- }
- if (!$raw && !$cupsremote) {
- my $choice;
- while ($choice ne _("Close")) {
- $choice = $in->ask_from_list_
- (($scanning ?
- _("Printing/Scanning on \"%s\"", $queue) :
- _("Printing on the printer \"%s\"", $queue)),
- $dialogtext,
- [ _("Print option list"), _("Close") ],
- _("Close"));
- if ($choice ne _("Close")) {
- my $w = $in->wait_message('', _("Printing test page(s)..."));
- printer::print_optionlist($printer);
- }
- }
- } else {
- $in->ask_warn(($scanning ?
- _("Printing/Scanning on \"%s\"", $queue) :
- _("Printing on the printer \"%s\"", $queue)),
- $dialogtext);
- }
-}
-
-sub scanner_help {
- my ($makemodel, $deviceuri) = @_;
- if ($deviceuri =~ m!^ptal:/(.*)$!) {
- my $ptaldevice = $1;
- if (($makemodel =~ /HP\s+OfficeJet\s+[KVRGPD]/i) ||
- ($makemodel =~ /HP\s+PSC\s+[579]/i)) {
- # SANE-driven models
- return _("Your HP multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line to get more information.
-
-Do not use \"scannerdrake\" for this device!",
- $ptaldevice);
- } elsif (($makemodel !~ /HP\s+PhotoSmart/i) &&
- ($makemodel !~ /HP\s+LaserJet\s+2200/i)) {
- # "ptal-hp"-driven models
- return _("Your HP multi-function device was configured automatically to be able to scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". Scanning via a graphical interface or from the GIMP is not supported yet for your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or 1200 you can only scan when you have the scanner option installed.
-
-Do not use \"scannerdrake\" for this device!",
- $ptaldevice);
- } else {
- return "";
- }
- }
-}
-
-sub copy_queues_from {
- my ($printer, $in, $oldspooler) = @_;
-
- $in->set_help('copyQueues') if $::isInstall;
- my $newspooler = $printer->{SPOOLER};
- my @oldqueues;
- my @queueentries;
- my @queuesselected;
- my $newspoolerstr;
- my $oldspoolerstr;
- my $noninteractive = 0;
- {
- my $w = $in->wait_message('', _("Reading printer data..."));
- @oldqueues = printer::get_copiable_queues($oldspooler, $newspooler);
- @oldqueues = sort(@oldqueues);
- $newspoolerstr = $printer::shortspooler_inv{$newspooler};
- $oldspoolerstr = $printer::shortspooler_inv{$oldspooler};
- for (@oldqueues) {
- push (@queuesselected, 1);
- push (@queueentries, { text => $_, type => 'bool',
- val => \$queuesselected[$#queuesselected] });
- }
- # LPRng and LPD use the same config files, therefore one sees the
- # queues of LPD when one uses LPRng and vice versa, but these queues
- # do not work. So automatically transfer all queues when switching
- # between LPD and LPRng.
- if (($oldspooler =~ /^lp/) && ($newspooler =~ /^lp/)) {
- $noninteractive = 1;
- }
- }
- if ($noninteractive ||
- $in->ask_from_
- ({ title => _("Transfer printer configuration"),
- messages => _("You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
-Not all queues can be transferred due to the following reasons:
-", $oldspoolerstr, $newspoolerstr) .
-($newspooler eq "cups" ? _("CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
-") :
- ($newspooler eq "pdq" ? _("PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
-") :
- _("LPD and LPRng do not support IPP printers.
-"))) .
-_("In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred.") .
-($oldspooler eq "cups" ? _("
-Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.") : ()) . _("
-Mark the printers which you want to transfer and click
-\"Transfer\"."),
- cancel => _("Do not transfer printers"),
- ok => _("Transfer")
- },
- \@queueentries
- )) {
- my $queuecopied = 0;
- for (@oldqueues) {
- if (shift(@queuesselected)) {
- my $oldqueue = $_;
- my $newqueue = $_;
- if ((!$printer->{configured}{$newqueue}) ||
- ($noninteractive) ||
- ($in->ask_from_
- ({ title => _("Transfer printer configuration"),
- messages => _("A printer named \"%s\" already exists under %s.
-Click \"Transfer\" to overwrite it.
-You can also type a new name or skip this printer.",
- $newqueue, $newspoolerstr),
- ok => _("Transfer"),
- cancel => _("Skip"),
- callbacks => { complete => sub {
- unless ($newqueue =~ /^\w+$/) {
- $in->ask_warn('', _("Name of printer should contain only letters, numbers and the underscore"));
- return (1,0);
- }
- if (($printer->{configured}{$newqueue})
- && ($newqueue ne $oldqueue) &&
- (!$in->ask_yesorno('', _("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
- $newqueue),
- 0))) {
- return (1,0); # Let the user correct the name
- }
- return 0;
- }}
- },
- [{label => _("New printer name"),val => \$newqueue}]))) {
- {
- my $w = $in->wait_message('',
- _("Transferring %s...", $oldqueue));
- printer::copy_foomatic_queue($printer, $oldqueue,
- $oldspooler, $newqueue) and
- $queuecopied = 1;
- }
- if ($oldqueue eq $printer->{DEFAULT}) {
- # Make the former default printer the new default
- # printer if the user does not reject
- if (($noninteractive) ||
- ($in->ask_yesorno
- (_("Transfer printer configuration"),
- _("You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?", $oldqueue, $newspoolerstr), 1))) {
- $printer->{DEFAULT} = $newqueue;
- printer::set_default_printer($printer);
- }
- }
- }
- }
- }
- if ($queuecopied) {
- my $w = $in->wait_message('', _("Refreshing printer data..."));
- printer::read_configured_queues($printer);
- }
- }
-}
-
-sub start_network {
- my ($in, $upNetwork) = @_;
- my $w = $in->wait_message(_("Configuration of a remote printer"),
- _("Starting network..."));
- if ($::isInstall) {
- return ($upNetwork and
- do { my $ret = &$upNetwork();
- undef $upNetwork;
- sleep(1);
- $ret});
- } else {
- return printer::start_service("network");
- }
-}
-
-sub check_network {
-
- # This routine is called whenever the user tries to configure a remote
- # printer. It checks the state of the network functionality to assure
- # that the network is up and running so that the remote printer is
- # reachable.
-
- my ($printer, $in, $upNetwork) = @_;
-
- # Any additional dialogs caused by this subroutine should appear as
- # extra windows and not embedded in the "Add printer" wizard.
- local $::isWizard = 0;
-
- $in->set_help('checkNetwork') if $::isInstall;
-
- # First check: Does /etc/sysconfig/network-scripts/draknet_conf exist
- # (otherwise the network is not configured yet and draknet has to be
- # started)
-
- if (!printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
- my $go_on = 0;
- while (!$go_on) {
- my $choice = _("Configure the network now");
- if ($in->ask_from(_("Network functionality not configured"),
- _("You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"),
- [ { val => \$choice, type => 'list',
- list => [ _("Configure the network now"),
- _("Go on without configuring the network") ]} ] )) {
- if ($choice eq _("Configure the network now")){
- if ($::isInstall) {
- require network::netconnect;
- network::netconnect::main
- ($in->{prefix}, $in->{netcnx} ||= {},
- $in->{netc}, $in->{mouse}, $in,
- $in->{intf}, 0,
- $in->{lang} eq "fr_FR" &&
- $in->{keyboard} eq "fr", 0);
- } else {
- system("/usr/sbin/draknet");
- }
- if (printer::files_exist("/etc/sysconfig/network-scripts/draknet_conf")) {
- $go_on = 1;
- }
- } else {
- return 1;
- }
- } else {
- return 0;
- }
- }
- }
-
- # Second check: Is the network running?
-
- if (printer::network_running()) {return 1;}
-
- # The network is configured now, start it.
- if (!start_network($in, $upNetwork)) {
- $in->ask_warn(_("Configuration of a remote printer"),
-($::isInstall ?
-_("The network configuration done during the installation cannot be started now. Please check whether the network gets accessable after booting your system and correct the configuration using the Mandrake Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the Mandrake Control Center, section \"Hardware\"/\"Printer\"") :
-_("The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.")));
- return 0;
- }
-
- # Give a SIGHUP to the daemon and in case of CUPS do also the
- # automatic configuration of broadcasting/access permissions
- # The daemon is not really restarted but only SIGHUPped to not
- # interrupt print jobs.
-
- my $w = $in->wait_message(_("Configuration of a remote printer"),
- _("Restarting printing system..."));
-
- return printer::SIGHUP_daemon($printer->{SPOOLER});
-
-}
-
-sub security_check {
- # Check the security mode and when in "high" or "paranoid" mode ask the
- # user whether he really wants to configure printing.
- my ($printer, $in, $spooler) = @_;
-
- # Any additional dialogs caused by this subroutine should appear as
- # extra windows and not embedded in the "Add printer" wizard.
- local $::isWizard = 0;
-
- $in->set_help('securityCheck') if $::isInstall;
-
- # Get security level
- my $security = undef;
- if ($::isInstall) {
- $security = $in->{'security'};
- } else {
- $security = printer::get_security_level();
- }
-
- # Exit silently if the spooler is PDQ
- if ($spooler eq "pdq") {return 1;}
-
- # Exit silently in medium or lower security levels
- if ((!$security) || ($security < 4)) {return 1;}
-
- # Exit silently if the current spooler is already activated for the current
- # security level
- if (printer::spooler_in_security_level($spooler, $security)) {return 1;}
-
- # Tell user in which security mode he is and ask him whether he really
- # wants to activate the spooler in the given security mode. Stop the
- # operation of installing the spooler if he disagrees.
- my $securitystr = ($security == 4 ? _("high") : _("paranoid"));
- if ($in->ask_yesorno(_("Installing a printing system in the %s security level", $securitystr),
- _("You are about to install the printing system %s on a system running in the %s security level.
-
-This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessable by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
-
-Do you really want to configure printing on this machine?",
- $printer::shortspooler_inv{$spooler},
- $securitystr))) {
- printer::add_spooler_to_security_level($spooler, $security);
- my $service;
- if (($spooler eq "lpr") || ($spooler eq "lprng")) {
- $service = "lpd";
- } else {
- $service = $spooler;
- }
- printer::start_service_on_boot($service);
- return 1;
- } else {
- return 0;
- }
-}
-
-sub start_spooler_on_boot {
- # Checks whether the spooler will be started at boot time and if not,
- # ask the user whether he wants to start the spooler at boot time.
- my ($printer, $in, $service) = @_;
-
- # Any additional dialogs caused by this subroutine should appear as
- # extra windows and not embedded in the "Add printer" wizard.
- local $::isWizard = 0;
-
- $in->set_help('startSpoolerOnBoot') if $::isInstall;
- if (!printer::service_starts_on_boot($service)) {
- if ($in->ask_yesorno(_("Starting the printing system at boot time"),
- _("The printing system (%s) will not be started automatically when the machine is booted.
-
-It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
-
-Do you want to have the automatic starting of the printing system turned on again?",
- $printer::shortspooler_inv{$printer->{SPOOLER}}))) {
- printer::start_service_on_boot($service);
- }
- }
- 1;
-}
-
-sub install_spooler {
- # installs the default spooler and start its daemon
- my ($printer, $in, $upNetwork) = @_;
- if (!$::testing) {
- # If the user refuses to install the spooler in high or paranoid
- # security level, exit.
- if (!security_check($printer, $in, $printer->{SPOOLER})) {
- return 0;
- }
- if ($printer->{SPOOLER} eq "cups") {
- {
- my $w = $in->wait_message('', _("Checking installed software..."));
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/lib/cups/cgi-bin/printers.cgi
- /sbin/ifconfig
- /usr/bin/xpp
- /usr/bin/curl),
- ($::expert ?
- "/usr/share/cups/model/postscript.ppd.gz" : ())
- )))) {
- $in->do_pkgs->install(('cups', 'net-tools', 'xpp',
- 'curl',
- ($::expert ? 'cups-drivers' : ())));
- }
- # Try to start the network when CUPS is the spooler, so that
- # remote CUPS printers get displayed (especially during
- # installation)
- $upNetwork and do {
- &$upNetwork();
- undef $upNetwork;
- sleep(1);
- };
- # Start daemon
- printer::start_service("cups");
- # Set the CUPS tools as defaults for "lpr", "lpq", "lprm", ...
- printer::set_alternative("lpr","/usr/bin/lpr-cups");
- printer::set_alternative("lpq","/usr/bin/lpq-cups");
- printer::set_alternative("lprm","/usr/bin/lprm-cups");
- printer::set_alternative("lp","/usr/bin/lp-cups");
- printer::set_alternative("cancel","/usr/bin/cancel-cups");
- printer::set_alternative("lpstat","/usr/bin/lpstat-cups");
- printer::set_alternative("lpc","/usr/sbin/lpc-cups");
- # Remove PDQ panic buttons from the user's KDE Desktops
- printer::pdq_panic_button("remove");
- }
- # Should it be started at boot time?
- start_spooler_on_boot($printer, $in, "cups");
- } elsif ($printer->{SPOOLER} eq "lpd") {
- {
- my $w = $in->wait_message('', _("Checking installed software..."));
- # "lpr" conflicts with "LPRng", remove "LPRng"
- if ((!$::testing) &&
- (printer::files_exist((qw(/usr/lib/filters/lpf))))) {
- my $w = $in->wait_message('', _("Removing LPRng..."));
- $in->do_pkgs->remove_nodeps('LPRng');
- }
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/sbin/lpf
- /usr/sbin/lpd
- /sbin/ifconfig
- /usr/bin/gpr
- /usr/bin/a2ps
- /usr/bin/convert))))) {
- $in->do_pkgs->install(('lpr', 'net-tools', 'gpr', 'a2ps', 'ImageMagick'));
- }
- # Start daemon
- printer::restart_service("lpd");
- # Set the LPD tools as defaults for "lpr", "lpq", "lprm", ...
- printer::set_alternative("lpr","/usr/bin/lpr-lpd");
- printer::set_alternative("lpq","/usr/bin/lpq-lpd");
- printer::set_alternative("lprm","/usr/bin/lprm-lpd");
- printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
- # Remove PDQ panic buttons from the user's KDE Desktops
- printer::pdq_panic_button("remove");
- }
- # Should it be started at boot time?
- start_spooler_on_boot($printer, $in, "lpd");
- } elsif ($printer->{SPOOLER} eq "lprng") {
- {
- my $w = $in->wait_message('', _("Checking installed software..."));
- # "LPRng" conflicts with "lpr", remove "lpr"
- if ((!$::testing) &&
- (printer::files_exist((qw(/usr/sbin/lpf))))) {
- my $w = $in->wait_message('', _("Removing LPD..."));
- $in->do_pkgs->remove_nodeps('lpr');
- }
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/lib/filters/lpf
- /usr/sbin/lpd
- /sbin/ifconfig
- /usr/bin/gpr
- /usr/bin/a2ps
- /usr/bin/convert))))) {
- $in->do_pkgs->install('LPRng', 'net-tools', 'gpr', 'a2ps', 'ImageMagick');
- }
- # Start daemon
- printer::restart_service("lpd");
- # Set the LPRng tools as defaults for "lpr", "lpq", "lprm", ...
- printer::set_alternative("lpr","/usr/bin/lpr-lpd");
- printer::set_alternative("lpq","/usr/bin/lpq-lpd");
- printer::set_alternative("lprm","/usr/bin/lprm-lpd");
- printer::set_alternative("lp","/usr/bin/lp-lpd");
- printer::set_alternative("cancel","/usr/bin/cancel-lpd");
- printer::set_alternative("lpstat","/usr/bin/lpstat-lpd");
- printer::set_alternative("lpc","/usr/sbin/lpc-lpd");
- # Remove PDQ panic buttons from the user's KDE Desktops
- printer::pdq_panic_button("remove");
- }
- # Should it be started at boot time?
- start_spooler_on_boot($printer, $in, "lpd");
- } elsif ($printer->{SPOOLER} eq "pdq") {
- {
- my $w = $in->wait_message('', _("Checking installed software..."));
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/pdq
- /usr/X11R6/bin/xpdq))))) {
- $in->do_pkgs->install('pdq');
- }
- # PDQ has no daemon, so nothing needs to be started
-
- # Set the PDQ tools as defaults for "lpr", "lpq", "lprm", ...
- printer::set_alternative("lpr","/usr/bin/lpr-pdq");
- printer::set_alternative("lpq","/usr/bin/lpq-foomatic");
- printer::set_alternative("lprm","/usr/bin/lprm-foomatic");
- # Add PDQ panic buttons to the user's KDE Desktops
- printer::pdq_panic_button("add");
- }
- }
- # Give a SIGHUP to the devfsd daemon to correct the permissions
- # for the /dev/... files according to the spooler
- printer::SIGHUP_daemon("devfs");
- }
- 1;
-}
-
-sub setup_default_spooler {
- my ($printer, $in, $upNetwork) = @_;
- $in->set_help('setupDefaultSpooler') if $::isInstall;
- $printer->{SPOOLER} ||= 'cups';
- my $oldspooler = $printer->{SPOOLER};
- my $str_spooler =
- $in->ask_from_list_(_("Select Printer Spooler"),
- _("Which printing system (spooler) do you want to use?"),
- [ printer::spooler() ],
- $printer::spooler_inv{$printer->{SPOOLER}},
- ) or return;
- $printer->{SPOOLER} = $printer::spooler{$str_spooler};
- # Install the spooler if not done yet
- if (!install_spooler($printer, $in, $upNetwork)) {
- $printer->{SPOOLER} = $oldspooler;
- return;
- }
- if ($printer->{SPOOLER} ne $oldspooler) {
- # Remove the local printers from Star Office/OpenOffice.org
- printer::removelocalprintersfromapplications($printer);
- # Get the queues of this spooler
- {
- my $w = $in->wait_message('', _("Reading printer data..."));
- printer::read_configured_queues($printer);
- }
- # Copy queues from former spooler
- copy_queues_from($printer, $in, $oldspooler);
- # Re-read the printer database (CUPS has additional drivers, PDQ
- # has no raw queue)
- %printer::thedb = ();
- #my $w = $in->wait_message('', _("Reading printer database..."));
- #printer::read_printer_db($printer->{SPOOLER});
- }
- # Save spooler choice
- printer::set_default_spooler($printer);
- return $printer->{SPOOLER};
-}
-
-sub configure_queue {
- my ($printer, $in) = @_;
- my $w = $in->wait_message('', _("Configuring printer \"%s\"...",
- $printer->{currentqueue}{queue}));
- $printer->{complete} = 1;
- printer::configure_queue($printer);
- $printer->{complete} = 0;
-}
-
-sub install_foomatic {
- my ($in) = @_;
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/foomatic-configure
- /usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm)
- )))) {
- my $w = $in->wait_message('', _("Installing Foomatic..."));
- $in->do_pkgs->install('foomatic');
- }
-}
-
-sub wizard_close {
- my ($in, $mode) = @_;
- # Leave wizard mode with congratulations screen if $mode = 1
- $::Wizard_no_previous = 1;
- $::Wizard_no_cancel = 1;
- $::Wizard_finished = 1;
- wizard_congratulations($in) if ($mode == 1);
- undef $::isWizard;
- $::WizardWindow->destroy if defined $::WizardWindow;
- undef $::WizardWindow;
-};
-
-#- Program entry point for configuration of the printing system.
-sub main {
- my ($printer, $in, $ask_multiple_printer, $upNetwork) = @_;
-
- # Default printer name, we do not use "lp" so that one can switch the
- # default printer under LPD without needing to rename another printer.
- # Under LPD the alias "lp" will be given to the default printer.
- my $defaultprname = _("Printer");
-
- # printerdrake does not work without foomatic, and for more convenience
- # we install some more stuff
- {
- my $w = $in->wait_message('', _("Checking installed software..."));
- if ((!$::testing) &&
- (!printer::files_exist((qw(/usr/bin/foomatic-configure
- /usr/lib/perl5/site_perl/5.6.1/Foomatic/DB.pm
- /usr/bin/escputil
- /usr/share/printer-testpages/testprint.ps
- ),
- (printer::files_exist("/usr/bin/gimp") ?
- "/usr/lib/gimp/1.2/plug-ins/print" : ())
- )))) {
- $in->do_pkgs->install('foomatic','printer-utils','printer-testpages',
- if_($in->do_pkgs->is_installed('gimp'), 'gimpprint'));
- }
-
- # only experts should be asked for the spooler
- !$::expert and $printer->{SPOOLER} ||= 'cups';
-
- }
-
- # If we have chosen a spooler, install it and mark it as default spooler
- if (($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '')) {
- if (!install_spooler($printer, $in, $upNetwork)) {return;}
- printer::set_default_spooler($printer);
- }
-
- # Control variables for the main loop
- my ($menuchoice, $cursorpos, $queue, $continue, $newqueue, $editqueue, $expertswitch, $menushown) = ('', '::', $defaultprname, 1, 0, 0, 0, 0);
- # Cursor position in queue modification window
- my $modify = _("Printer options");
- while ($continue) {
- $newqueue = 0;
- # When the queue list is not shown, cancelling the printer type
- # dialog should leave the program
- $continue = 0;
- # Get the default printer
- if (defined($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '') &&
- ((!defined($printer->{DEFAULT})) || ($printer->{DEFAULT} eq ''))) {
- my $w = $in->wait_message('', _("Preparing PrinterDrake..."));
- $printer->{DEFAULT} = printer::get_default_printer($printer);
- if ($printer->{DEFAULT}) {
- # If a CUPS system has only remote printers and no default
- # printer defined, it defines the first printer whose
- # broadcast signal appeared after the start of the CUPS
- # daemon, so on every start another printer gets the default
- # printer. To avoid this, make sure that the default printer
- # is defined.
- printer::set_default_printer($printer);
- } else {
- $printer->{DEFAULT} = '';
- }
- }
-
- # Configure the current printer queues in applications
- {
- my $w = $in->wait_message('', _("Configuring applications..."));
- printer::configureapplications($printer);
- }
-
- if ($editqueue) {
- # The user was either in the printer modification dialog and did
- # not close it or he had set up a new queue and said that the test
- # page didn't come out correctly, so let the user edit the queue.
- $newqueue = 0;
- $continue = 1;
- $editqueue = 0;
- } else {
- # Reset modification window cursor when one leaves the window
- $modify = _("Printer options");
- if (!$ask_multiple_printer &&
- %{$printer->{configured} || {}} == ()) {
- $in->set_help('doYouWantToPrint') if $::isInstall;
- $newqueue = 1;
- $menuchoice = $printer->{want} ||
- $in->ask_yesorno(_("Printer"),
- _("Would you like to configure printing?"),
- 0) ? "\@addprinter" : "\@quit";
- if ($menuchoice ne "\@quit") {
- $printer->{SPOOLER} ||=
- setup_default_spooler ($printer, $in, $upNetwork) ||
- return;
- }
- } else {
- # Ask for a spooler when none is defined
- $printer->{SPOOLER} ||= setup_default_spooler ($printer, $in, $upNetwork) || return;
- # This entry and the check for this entry have to use
- # the same translation to work properly
- my $spoolerentry = _("Printing system: ");
- # Show a queue list window when there is at least one queue,
- # when we are in expert mode, or when we are not in the
- # installation.
- unless ((!%{$printer->{configured} || {}}) &&
- (!$::expert) && ($::isInstall)) {
- $in->set_help('mainMenu') if $::isInstall;
- # Cancelling the printer type dialog should leed to this
- # dialog
- $continue = 1;
- # This is for the "Recommended" installation. When one has
- # no printer queue printerdrake starts directly adding
- # a printer and in the end it asks whether one wants to
- # install another printer. If the user says "Yes", he
- # arrives in the main menu of printerdrake. From now
- # on the question is not asked any more but the menu
- # is shown directly after having done an operation.
- $menushown = 1;
- # Initialize the cursor position
- if (($cursorpos eq "::") &&
- ($printer->{DEFAULT}) &&
- ($printer->{DEFAULT} ne "")) {
- if ($printer->{configured}{$printer->{DEFAULT}}) {
- $cursorpos =
- $printer->{configured}{$printer->{DEFAULT}}{'queuedata'}{'menuentry'} . _(" (Default)");
- } elsif ($printer->{SPOOLER} eq "cups") {
- ($cursorpos) =
- grep { $_ =~ /!$printer->{DEFAULT}:[^!]*$/ }
- printer::get_cups_remote_queues($printer);
- }
- }
- # Generate the list of available printers
- my @printerlist =
- ( (sort((map {$printer->{configured}{$_}{'queuedata'}{'menuentry'}
- . ($_ eq $printer->{DEFAULT} ?
- _(" (Default)") : (""))}
- keys(%{$printer->{configured}
- || {}})),
- ($printer->{SPOOLER} eq "cups" ?
- printer::get_cups_remote_queues($printer)
- : ())))
- );
- my $noprinters = ($#printerlist < 0);
- # Position the cursor where it were before (in case
- # a button was pressed).
- $menuchoice = $cursorpos;
- # Show the main dialog
- $in->ask_from_(
- {title => _("Printerdrake"),
- messages =>
- ($noprinters ? "" :
- (($printer->{SPOOLER} eq "cups") ?
- _("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; to view information about it; or to make a printer on a remote CUPS server available for Star Office/OpenOffice.org.") :
- _("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it."))),
- cancel => (""),
- ok => (""),
- },
- # List the queues
- [ ($noprinters ? () :
- { val => \$menuchoice, format => \&translate,
- sort => 0, separator => "!",tree_expanded => 1,
- quit_if_double_click => 1,allow_empty_list =>1,
- list => \@printerlist }),
- { clicked_may_quit =>
- sub {
- # Save the cursor position
- $cursorpos = $menuchoice;
- $menuchoice = "\@addprinter";
- 1;
- },
- val => _("Add a new printer") },
- ( $printer->{SPOOLER} eq "cups" ?
- ({ clicked_may_quit =>
- sub {
- # Save the cursor position
- $cursorpos = $menuchoice;
- $menuchoice = "\@refresh";
- 1;
- },
- val => _("Refresh printer list (to display all available remote CUPS printers)") },
- { clicked_may_quit =>
- sub {
- # Save the cursor position
- $cursorpos = $menuchoice;
- $menuchoice = "\@cupsconfig";
- 1;
- },
- val => ($::expert ? _("CUPS configuration") :
- _("Specify CUPS server")) }) : ()),
- ( $::expert ?
- { clicked_may_quit =>
- sub {
- # Save the cursor position
- $cursorpos = $menuchoice;
- $menuchoice = "\@spooler";
- 1;
- },
- val => _("Change the printing system") } :
- ()),
- ( !$::isInstall ?
- { clicked_may_quit =>
- sub { $menuchoice = "\@usermode"; 1; },
- val => ($::expert ? _("Normal Mode") :
- _("Expert Mode")) } : ()),
- { clicked_may_quit =>
- sub { $menuchoice = "\@quit"; 1; },
- val => _("Quit") },
- ]
- );
- # Toggle expert mode and standard mode
- if ($menuchoice eq "\@usermode") {
- $::expert = !$::expert;
- # Read printer database for the new user mode
- %printer::thedb = ();
- #my $w = $in->wait_message('', _("Reading printer database..."));
- #printer::read_printer_db($printer->{SPOOLER});
- # Re-read printer queues to switch the tree
- # structure between expert/normal mode.
- my $w = $in->wait_message('', _("Reading printer data..."));
- printer::read_configured_queues($printer);
- $cursorpos = "::";
- next;
- }
- } else {
- #- as there are no printer already configured, Add one
- #- automatically.
- $menuchoice = "\@addprinter";
- }
- # Refresh printer list
- if ($menuchoice eq "\@refresh") {
- next;
- }
- # Configure CUPS
- if ($menuchoice eq "\@cupsconfig") {
- config_cups($printer, $in, $upNetwork);
- next;
- }
- # Determine a default name for a new printer queue
- if ($menuchoice eq "\@addprinter") {
- $newqueue = 1;
- my %queues;
- @queues{map { split '\|', $_ } keys %{$printer->{configured}}} = ();
- my $i = ''; while ($i < 150) { last unless exists $queues{"$defaultprname$i"}; ++$i; }
- $queue = "$defaultprname$i";
- }
- # Function to switch to another spooler
- if ($menuchoice eq "\@spooler") {
- $printer->{SPOOLER} = setup_default_spooler ($printer, $in, $upNetwork) || $printer->{SPOOLER};
- next;
- }
- # Rip the queue name out of the chosen menu entry
- if ($menuchoice =~ /!([^\s!:]+):[^!]*$/) {
- $queue = $1;
- # Save the cursor position
- $cursorpos = $menuchoice;
- }
- }
- # Save the default spooler
- printer::set_default_spooler($printer);
- #- Close printerdrake
- $menuchoice eq "\@quit" and last;
- }
- if ($newqueue) {
- $printer->{NEW} = 1;
- #- Set default values for a new queue
- $printer::printer_type_inv{$printer->{TYPE}} or
- $printer->{TYPE} = printer::default_printer_type($printer);
- $printer->{currentqueue} = { queue => $queue,
- foomatic => 0,
- desc => "",
- loc => "",
- make => "",
- model => "",
- printer => "",
- driver => "",
- connect => "",
- spooler => $printer->{SPOOLER},
- };
- #- Set OLD_QUEUE field so that the subroutines for the
- #- configuration work correctly.
- $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
- #- Do all the configuration steps for a new queue
- step_0:
- #if ((!$::expert) && (!$::isEmbedded) && (!$::isInstall) &&
- if ((!$::isEmbedded) && (!$::isInstall) &&
- ($in->isa('interactive_gtk'))) {
- $continue = 1;
- # Enter wizard mode
- $::Wizard_pix_up = "wiz_printerdrake.png";
- $::Wizard_title = _("Add a new printer");
- $::isWizard = 1;
- # Wizard welcome screen
- $::Wizard_no_previous = 1;
- undef $::Wizard_no_cancel;
- undef $::Wizard_finished;
- wizard_welcome($printer, $in) or do {
- wizard_close($in, 0);
- next;
- };
- undef $::Wizard_no_previous;
- eval {
- # eval to catch wizard cancel. The wizard stuff should
- # be in a separate function with steps. see dragw.
- # (dams)
- $printer->{TYPE} = "LOCAL";
- step_1:
- !$::expert or choose_printer_type($printer, $in) or
- goto step_0;
- step_2:
- setup_printer_connection($printer, $in, $upNetwork) or
- do {
- goto step_1 if $::expert;
- goto step_0;
- };
- step_3:
- if (($::expert) or ($printer->{MANUAL}) or
- ($printer->{MORETHANONE})) {
- choose_printer_name($printer, $in) or
- goto step_2;
- }
- get_db_entry($printer, $in);
- step_3_9:
- if ((!$::expert) and (!$printer->{MANUAL})) {
- is_model_correct($printer, $in) or do {
- goto step_3 if $printer->{MORETHANONE};
- goto step_2;
- }
- }
- step_4:
- # Remember DB entry for "Previous" button in wizard
- my $dbentry = $printer->{DBENTRY};
- if (($::expert) or ($printer->{MANUAL}) or
- ($printer->{MANUALMODEL})) {
- choose_model($printer, $in) or do {
- # Restore DB entry
- $printer->{DBENTRY} = $dbentry;
- goto step_3_9 if $printer->{MANUALMODEL};
- goto step_3;
- };
- }
- get_printer_info($printer, $in) or next;
- step_5:
- setup_options($printer, $in) or
- goto step_4;
- configure_queue($printer, $in);
- undef $printer->{MANUAL} if $printer->{MANUAL};
- $::Wizard_no_previous = 1;
- setasdefault($printer, $in);
- $cursorpos =
- $printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} .
- ($printer->{QUEUE} eq $printer->{DEFAULT} ?
- _(" (Default)") : ());
- my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
- if ($testpages == 1) {
- # User was content with test pages
- # Leave wizard mode with congratulations screen
- wizard_close($in, 1);
- $continue = ($::expert || !$::isInstall || $menushown ||
- $in->ask_yesorno('',_("Do you want to configure another printer?")));
- } elsif ($testpages == 2) {
- # User was not content with test pages
- # Leave wizard mode without congratulations
- # screen
- wizard_close($in, 0);
- $editqueue = 1;
- $queue = $printer->{QUEUE};
- }
- };
- wizard_close($in, 0) if ($@ =~ /wizcancel/);
- } else {
- $printer->{TYPE} = "LOCAL";
- !$::expert or choose_printer_type($printer, $in) or next;
- #- Cancelling the printer connection type window
- #- should not restart printerdrake in recommended mode,
- #- it is the first dialog of the sequence there and
- #- the "Add printer" sequence should be stopped when there
- #- are no local printers. In expert mode this is the second
- #- dialog of the sequence.
- $continue = 1 if ($::expert || !$::isInstall);
- setup_printer_connection($printer, $in, $upNetwork) or next;
- #- Cancelling one of the following dialogs should
- #- restart printerdrake
- $continue = 1;
- if (($::expert) or ($printer->{MANUAL}) or
- ($printer->{MORETHANONE})) {
- choose_printer_name($printer, $in) or next;
- }
- get_db_entry($printer, $in);
- if ((!$::expert) and (!$printer->{MANUAL})) {
- is_model_correct($printer, $in) or next;
- }
- if (($::expert) or ($printer->{MANUAL}) or
- ($printer->{MANUALMODEL})) {
- choose_model($printer, $in) or next;
- }
- get_printer_info($printer, $in) or next;
- setup_options($printer, $in) or next;
- configure_queue($printer, $in);
- undef $printer->{MANUAL} if $printer->{MANUAL};
- setasdefault($printer, $in);
- $cursorpos =
- $printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} .
- ($printer->{QUEUE} eq $printer->{DEFAULT} ?
- _(" (Default)") : ());
- my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
- if ($testpages == 1) {
- # User was content with test pages
- $continue = ($::expert || !$::isInstall || $menushown ||
- $in->ask_yesorno('',_("Do you want to configure another printer?")));
- } elsif ($testpages == 2) {
- # User was not content with test pages
- $editqueue = 1;
- $queue = $printer->{QUEUE};
- }
- };
- undef $printer->{MANUAL} if $printer->{MANUAL};
- undef $printer->{NOAUTODETECT} if $printer->{NOAUTODETECT};
- } else {
- $printer->{NEW} = 0;
- # Modify a queue, ask which part should be modified
- $in->set_help('modifyPrinterMenu') if $::isInstall;
- # Get some info to display
- my $infoline;
- if ($printer->{configured}{$queue}) {
- # Here we must regenerate the menu entry, because the
- # parameters can be changed.
- printer::make_menuentry($printer,$queue);
- $printer->{configured}{$queue}{'queuedata'}{menuentry} =~
- /!([^!]+)$/;
- $infoline = $1 .
- ($queue eq $printer->{DEFAULT} ? _(" (Default)") : ()) .
- ($printer->{configured}{$queue}{'queuedata'}{'desc'} ?
- ", Descr.: $printer->{configured}{$queue}{'queuedata'}{'desc'}" : ()) .
- ($printer->{configured}{$queue}{'queuedata'}{'loc'} ?
- ", Loc.: $printer->{configured}{$queue}{'queuedata'}{'loc'}" : ()) .
- ($::expert ?
- ", Driver: $printer->{configured}{$queue}{'queuedata'}{'driver'}" : ());
- } else {
- # The parameters of a remote CUPS queue cannot be changed,
- # so we can simply take the menu entry.
- $cursorpos =~ /!([^!]+)$/;
- $infoline = $1;
- }
- if ($in->ask_from_
- ({ title => _("Modify printer configuration"),
- messages =>
- _("Printer %s
-What do you want to modify on this printer?",
- $infoline),
- cancel => _("Close"),
- ok => _("Do it!")
- },
- [ { val => \$modify, format => \&translate,
- type => 'list',
- list => [ ($printer->{configured}{$queue} ?
- (_("Printer connection type"),
- _("Printer name, description, location"),
- ($::expert ?
- _("Printer manufacturer, model, driver") :
- _("Printer manufacturer, model")),
- (($printer->{configured}{$queue}{'queuedata'}{'make'} ne
- "") &&
- (($printer->{configured}{$queue}{'queuedata'}{'model'} ne
- _("Unknown model")) &&
- ($printer->{configured}{$queue}{'queuedata'}{'model'} ne
- _("Raw printer"))) ?
- _("Printer options") : ())) : ()),
- (($queue ne $printer->{DEFAULT}) ?
- _("Set this printer as the default") : ()),
- ($printer->{configured}{$queue} ? () :
- (_("Add this printer to Star Office/OpenOffice.org"),
- _("Remove this printer from Star Office/OpenOffice.org"))),
- _("Print test pages"),
- _("Know how to use this printer"),
- ($printer->{configured}{$queue} ?
- _("Remove printer") : ()) ] } ] ) ) {
- # Stay in the queue edit window until the user clicks "Close"
- # or deletes the queue
- $editqueue = 1;
- #- Copy the queue data and work on the copy
- $printer->{currentqueue} = {};
- my $driver;
- if ($printer->{configured}{$queue}) {
- printer::copy_printer_params($printer->{configured}{$queue}{'queuedata'}, $printer->{currentqueue});
- #- Keep in mind the printer driver which was used, so it
- #- can be determined whether the driver is only
- #- available in expert and so for setting the options
- #- for the driver in recommended mode a special
- #- treatment has to be applied.
- $driver = $printer->{currentqueue}{driver};
- }
- #- keep in mind old name of queue (in case of changing)
- $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
- #- Reset some variables
- $printer->{OLD_CHOICE} = undef;
- $printer->{DBENTRY} = undef;
- #- Which printer type did we have before (check beginning of
- #- URI)
- my $type;
- if ($printer->{configured}{$queue}) {
- for $type (qw(file lpd socket smb ncp postpipe)) {
- if ($printer->{currentqueue}{'connect'}
- =~ /^$type:/) {
- $printer->{TYPE} =
- ($type eq 'file' ? 'LOCAL' : uc($type));
- last;
- }
- }
- }
- # Do the chosen task
- if ($modify eq _("Printer connection type")) {
- choose_printer_type($printer, $in) &&
- setup_printer_connection($printer, $in, $upNetwork) &&
- configure_queue($printer, $in);
- } elsif ($modify eq _("Printer name, description, location")) {
- choose_printer_name($printer, $in) &&
- configure_queue($printer, $in);
- # Delete old queue when it was renamed
- if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
- my $w = $in->wait_message('', _("Removing old printer \"%s\"...", $printer->{OLD_QUEUE}));
- printer::remove_queue($printer, $printer->{OLD_QUEUE});
- # If the default printer was renamed, correct the
- # the default printer setting of the spooler
- if ($queue eq $printer->{DEFAULT}) {
- $printer->{DEFAULT} = $printer->{QUEUE};
- printer::set_default_printer($printer);
- }
- $queue = $printer->{QUEUE};
- }
- } elsif (($modify eq _("Printer manufacturer, model, driver")) ||
- ($modify eq _("Printer manufacturer, model"))) {
- get_db_entry($printer, $in);
- choose_model($printer, $in) &&
- get_printer_info($printer, $in) &&
- setup_options($printer, $in) &&
- configure_queue($printer, $in);
- } elsif ($modify eq _("Printer options")) {
- get_printer_info($printer, $in) &&
- setup_options($printer, $in) &&
- configure_queue($printer, $in);
- } elsif ($modify eq _("Set this printer as the default")) {
- $printer->{DEFAULT} = $queue;
- printer::set_default_printer($printer);
- $in->ask_warn(_("Default printer"),
- _("The printer \"%s\" is set as the default printer now.", $queue));
- } elsif ($modify eq _("Add this printer to Star Office/OpenOffice.org")) {
- if (printer::addcupsremotetoapplications
- ($printer, $queue)) {
- $in->ask_warn(_("Adding printer to Star Office/OpenOffice.org"),
- _("The printer \"%s\" was successfully added to Star Office/OpenOffice.org.", $queue));
- } else {
- $in->ask_warn(_("Adding printer to Star Office/OpenOffice.org"),
- _("Failed to add the printer \"%s\" to Star Office/OpenOffice.org.", $queue));
- }
- } elsif ($modify eq _("Remove this printer from Star Office/OpenOffice.org")) {
- if (printer::removeprinterfromapplications
- ($printer, $queue)) {
- $in->ask_warn(_("Removing printer from Star Office/OpenOffice.org"),
- _("The printer \"%s\" was successfully removed from Star Office/OpenOffice.org.", $queue));
- } else {
- $in->ask_warn(_("Removing printer from Star Office/OpenOffice.org"),
- _("Failed to remove the printer \"%s\" from Star Office/OpenOffice.org.", $queue));
- }
- } elsif ($modify eq _("Print test pages")) {
- print_testpages($printer, $in, $upNetwork);
- } elsif ($modify eq _("Know how to use this printer")) {
- printer_help($printer, $in);
- } elsif ($modify eq _("Remove printer")) {
- if ($in->ask_yesorno('',
- _("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
- {
- my $w = $in->wait_message('', _("Removing printer \"%s\"...", $queue));
- if (printer::remove_queue($printer, $queue)) {
- $editqueue = 0;
- # Define a new default printer if we have
- # removed the default one
- if ($queue eq $printer->{DEFAULT}) {
- my @k = sort(keys(%{$printer->{configured}}));
- if (@k) {
- $printer->{DEFAULT} = $k[0];
- printer::set_default_printer($printer);
- } else {
- $printer->{DEFAULT} = "";
- }
- }
- # Let the main menu cursor go to the default
- # position
- $cursorpos = "::";
- }
- }
- }
- }
- # Make sure that the cursor is still at the same position
- # in the main menu when one has modified something on the
- # current printer
- if (($printer->{QUEUE}) && ($printer->{QUEUE} ne "")) {
- if ($printer->{configured}{$printer->{QUEUE}}) {
- $cursorpos =
- $printer->{configured}{$printer->{QUEUE}}{'queuedata'}{'menuentry'} .
- ($printer->{QUEUE} eq $printer->{DEFAULT} ?
- _(" (Default)") : ());
- } else {
- my $s1 = _(" (Default)");
- my $s2 = $s1;
- $s2 =~ s/\(/\\\(/;
- $s2 =~ s/\)/\\\)/;
- if (($printer->{QUEUE} eq $printer->{DEFAULT}) &&
- ($cursorpos !~ /$s2/)) {
- $cursorpos .= $s1;
- }
- }
- }
- } else {
- $editqueue = 0;
- }
- $continue = ($editqueue || $::expert || !$::isInstall ||
- $menushown ||
- $in->ask_yesorno('',_("Do you want to configure another printer?")));
- }
-
- # Configure the current printer queue in applications when main menu
- # will not be shown (During installation in "Recommended" mode)
- if ($::isInstall && !$::expert && !$menushown && !$continue) {
- my $w = $in->wait_message('', _("Configuring applications..."));
- printer::configureapplications($printer);
- }
-
- # Delete some variables
- $printer->{OLD_QUEUE} = "";
- $printer->{QUEUE} = "";
- $printer->{TYPE} = "";
- $printer->{str_type} = "";
- $printer->{currentqueue} = {};
- $printer->{DBENTRY} = "";
- $printer->{ARGS} = "";
- $printer->{complete} = 0;
- $printer->{OLD_CHOICE} = "";
- }
- # Clean up the $printer data structure for auto-install log
- for my $queue (keys %{$printer->{configured}}) {
- for my $item (keys %{$printer->{configured}{$queue}}) {
- if ($item ne "queuedata") {
- delete($printer->{configured}{$queue}{$item});
- }
- }
- if ($printer->{configured}{$queue}{'queuedata'}{'menuentry'}) {
- delete($printer->{configured}{$queue}{'queuedata'}{'menuentry'});
- }
- }
- delete($printer->{OLD_QUEUE});
- delete($printer->{QUEUE});
- delete($printer->{TYPE});
- delete($printer->{str_type});
- delete($printer->{currentqueue});
- delete($printer->{DBENTRY});
- delete($printer->{ARGS});
- delete($printer->{complete});
- delete($printer->{OLD_CHOICE});
- delete($printer->{NEW});
- delete($printer->{MORETHANONE});
- delete($printer->{MANUALMODEL});
- #use Data::Dumper;
- #print "###############################################################################\n", Dumper($printer);
-
-}
-
diff --git a/perl-install/proxy.pm b/perl-install/proxy.pm
deleted file mode 100644
index 72fd35664..000000000
--- a/perl-install/proxy.pm
+++ /dev/null
@@ -1,110 +0,0 @@
-package proxy;
-
-use diagnostics;
-use strict;
-use run_program;
-use common;
-use log;
-use c;
-
-
-sub main {
- my ($prefix, $in) = @_;
- my $proxy_cfg = {};
- my $config_file = "$prefix/usr/lib/wgetrc";
-
- # grab current config
- foreach (cat_($config_file)) {
- /http_proxy = (http:.*):(\d+)/ and ($proxy_cfg->{http_url}, $proxy_cfg->{http_port}) = ($1, $2);
- /ftp_proxy = (ftp:.*):(\d+)/ and ($proxy_cfg->{ftp_url}, $proxy_cfg->{ftp_port}) = ($1, $2);
- /http_user = (.*)/ and ($proxy_cfg->{login}) = $1;
- if (/http_passwd = (.*)/) {
- ($proxy_cfg->{passwd}) = $1;
- ($proxy_cfg->{passwd2}) = $1;
- }
- }
- begin:
- $::isWizard = 1;
- $::Wizard_no_previous = 1;
- $in->ask_okcancel(_("Proxy configuration"),
- _("Welcome to the proxy configuration utility.\n\nHere, you'll be able to set up your http and ftp proxies\nwith or without login and password\n"
- ), 1);
-
- # http proxy
- step_http_proxy:
- undef $::Wizard_no_previous;
- $proxy_cfg->{http_url} ||= "http://www.proxy.com/";
- $in->ask_from(_("Proxy configuration"),
- _("Please fill in the http proxy informations\nLeave it blank if you don't want an http proxy"),
- [ { label => _("URL"), val => \$proxy_cfg->{http_url} },
- { label => _("port"), val => \$proxy_cfg->{http_port} }
- ],
- complete => sub {
- if ($proxy_cfg->{http_url} && $proxy_cfg->{http_url} !~ /^http:/) {
- $in->ask_warn('', _("Url should begin with 'http:'"));
- return (1,0);
- }
- if ($proxy_cfg->{http_port} && $proxy_cfg->{http_port} !~ /^\d+$/) {
- $in->ask_warn('', _("The port part should be numeric"));
- return (1,1);
- }
- 0;
- }
- ) or goto begin;
-
- # ftp proxy
- step_ftp_proxy:
- $proxy_cfg->{ftp_url} ||= "ftp://ftp.proxy.com/";
- $in->ask_from(_("Proxy configuration"),
- _("Please fill in the ftp proxy informations\nLeave it blank if you don't want an ftp proxy"),
- [ { label => _("URL"), val => \$proxy_cfg->{ftp_url} },
- { label => _("port"), val => \$proxy_cfg->{ftp_port} }
- ],
- complete => sub {
- if ($proxy_cfg->{ftp_url} && $proxy_cfg->{ftp_url} !~ /^ftp:/) {
- $in->ask_warn('', _("Url should begin with 'ftp:'"));
- return (1,0);
- }
- if ($proxy_cfg->{ftp_port} && $proxy_cfg->{ftp_port} !~ /^\d+$/) {
- $in->ask_warn('', _("The port part should be numeric"));
- return (1,1);
- }
- 0;
- }
- ) or goto step_http_proxy;
-
- # proxy login/passwd
- step_login:
- $in->ask_from(_("Proxy configuration"),
- _("Please enter proxy login and password, if any.\nLeave it blank if you don't want login/passwd"),
- [ { label => _("login"), val => \$proxy_cfg->{login} },
- {
- label => _("password"), val => \$proxy_cfg->{passwd}, hidden => 1 },
- {
- label => _("re-type password"), val => \$proxy_cfg->{passwd2}, hidden => 1 }
- ],
- complete => sub {
- if ($proxy_cfg->{passwd} ne $proxy_cfg->{passwd2}) {
- $in->ask_warn('', _("The passwords don't match. Try again!"));
- return(1,1);
- }
- 0;
- }
- ) or goto step_ftp_proxy;
- # save config
- substInFile {
- s/^(http|ftp)_proxy.*\n//;
- eof and $_ .= "http_proxy = $proxy_cfg->{http_url}:$proxy_cfg->{http_port}
-ftp_proxy = $proxy_cfg->{ftp_url}:$proxy_cfg->{ftp_port}\n";
- } $config_file;
- $proxy_cfg->{login} and substInFile {
- s/^http_(user|passwd).*\n//;
- eof and $_ .= "http_user = $proxy_cfg->{login}
-http_passwd = $proxy_cfg->{passwd}\n" } $config_file;
- log::l("[drakproxy] Installation complete, exiting\n");
-}
-
-#---------------------------------------------
-# WONDERFULL pad
-#---------------------------------------------
-1;
diff --git a/perl-install/raid.pm b/perl-install/raid.pm
deleted file mode 100644
index 86a27d866..000000000
--- a/perl-install/raid.pm
+++ /dev/null
@@ -1,180 +0,0 @@
-package raid; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use run_program;
-use devices;
-use modules;
-use fs;
-
-sub nb {
- my ($nb) = @_;
- first((ref $nb ? $nb->{device} : $nb) =~ /(\d+)/);
-}
-
-sub new {
- my ($raids, @parts) = @_;
- my $nb = @$raids;
- $raids->[$nb] = { 'chunk-size' => "64k", type => 0x483, disks => [ @parts ], device => "md$nb", notFormatted => 1, level => 1 };
- foreach my $part (@parts) {
- $part->{raid} = $nb;
- delete $part->{mntpoint};
- }
- update($raids->[$nb]);
- $nb;
-}
-
-sub add {
- my ($raids, $part, $nb) = @_; $nb = nb($nb);
- $raids->[$nb]{isMounted} and die _("Can't add a partition to _formatted_ RAID md%d", $nb);
- inactivate_and_dirty($raids->[$nb]);
- $part->{notFormatted} = 1; $part->{isFormatted} = 0;
- $part->{raid} = $nb;
- delete $part->{mntpoint};
- push @{$raids->[$nb]{disks}}, $part;
- update($raids->[$nb]);
-}
-
-sub delete {
- my ($raids, $nb) = @_;
- $nb = nb($nb);
- inactivate_and_dirty($raids->[$nb]);
- delete $_->{raid} foreach @{$raids->[$nb]{disks}};
- undef $raids->[$nb];
-}
-
-sub changeNb {
- my ($raids, $oldnb, $newnb) = @_;
- if ($oldnb != $newnb) {
- inactivate_and_dirty($raids->[$_]) foreach $oldnb, $newnb;
-
- ($raids->[$newnb], $raids->[$oldnb]) = ($raids->[$oldnb], undef);
- $raids->[$newnb]{device} = "md$newnb";
- $_->{raid} = $newnb foreach @{$raids->[$newnb]{disks}};
- }
- $newnb;
-}
-
-sub removeDisk {
- my ($raids, $part) = @_;
- my $nb = nb($part->{raid});
- inactivate_and_dirty($raids->[$nb]);
- delete $part->{raid};
- my $disks = $raids->[$nb]{disks};
- @$disks = grep { $_ != $part } @$disks;
- if (@$disks) {
- update($raids->[$nb]);
- } else {
- undef $raids->[$nb];
- }
-}
-
-sub updateSize {
- my ($part) = @_;
- local $_ = $part->{level};
- my @l = map { $_->{size} } @{$part->{disks}};
-
- $part->{size} = do {
- if (/0|linear/) { sum @l }
- elsif (/1/ ) { min @l }
- elsif (/4|5/) { min(@l) * $#l }
- };
-}
-
-sub module {
- my ($part) = @_;
- my $mod = $part->{level};
-
- $mod = 5 if $mod eq "4";
- $mod = "raid$mod" if $mod =~ /^\d+$/;
- $mod;
-}
-
-
-sub update {
- updateSize($_) foreach @_;
-}
-
-sub write {
- my ($raids, $file) = @_;
- local *F;
- local $\ = "\n";
- open F, ">$file" or die _("Can't write file %s", $file);
-
- foreach (grep {$_} @$raids) {
- print F <<"EOF";
-raiddev /dev/$_->{device}
-raid-level $_->{level}
-chunk-size $_->{'chunk-size'}
-persistent-superblock 1
-EOF
- print F "nr-raid-disks ", int @{$_->{disks}};
- map_index {
- print F " device ", devices::make($_->{device});
- print F " raid-disk $::i";
- } @{$_->{disks}};
- }
-}
-
-sub make {
- my ($raids, $part) = @_;
-
- return if is_active($part->{device});
-
- inactivate_and_dirty($part);
-
- isRAID($_) and make($raids, $_) foreach @{$part->{disks}};
- my $dev = devices::make($part->{device});
- eval { modules::load(module($part)) };
- &write($raids, "/etc/raidtab");
- run_program::run("mkraid", "--really-force", $dev) or die
- $::isStandalone ? _("mkraid failed (maybe raidtools are missing?)") : _("mkraid failed");
-}
-
-sub format_part {
- my ($raids, $part) = @_;
- $part->{isFormatted} and return;
-
- make($raids, $part);
- fs::real_format_part($part);
- $_->{isFormatted} = 1 foreach @{$part->{disks}};
-}
-
-sub verify {
- my ($raids) = @_;
- $raids or return;
- foreach (grep {$_} @$raids) {
- @{$_->{disks}} >= ($_->{level} =~ /4|5/ ? 3 : 2) or die _("Not enough partitions for RAID level %d\n", $_->{level});
- }
-}
-
-sub prepare_prefixed {
- my ($raids, $prefix) = @_;
- $raids or return;
-
- eval { cp_af("/etc/raidtab", "$prefix/etc/raidtab") };
- foreach (grep {$_} @$raids) {
- devices::make("$prefix/dev/$_->{device}") foreach @{$_->{disks}};
- }
-}
-
-sub inactivate_and_dirty {
- my ($part) = @_;
- run_program::run("raidstop", devices::make($part->{device}));
- $part->{notFormatted} = 1; $part->{isFormatted} = 0;
-}
-
-sub is_active {
- my ($dev) = @_;
- grep { /^$dev / } cat_("/proc/mdstat");
-}
-
-sub inactivate_all() { run_program::run("raidstop", devices::make("md$_")) foreach 0..7 }
-
-1;
diff --git a/perl-install/resize_fat/.cvsignore b/perl-install/resize_fat/.cvsignore
deleted file mode 100644
index 3001c7424..000000000
--- a/perl-install/resize_fat/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-blib
-pm_to_blib
-Makefile_c
-c_rewritten.c
-c_rewritten.bs
diff --git a/perl-install/resize_fat/Makefile b/perl-install/resize_fat/Makefile
deleted file mode 100644
index a82ca8441..000000000
--- a/perl-install/resize_fat/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-c_rewritten: %: %.xs
- test -e Makefile_c || perl Makefile.PL
- $(MAKE) -f Makefile_c LD_RUN_PATH=
- rm -f ../auto/resize_fat ; ln -s ../resize_fat/blib/arch/auto ../auto/resize_fat
-
-clean:
- test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
- rm -f *~ *.o
diff --git a/perl-install/resize_fat/Makefile.PL b/perl-install/resize_fat/Makefile.PL
deleted file mode 100644
index 712f4e395..000000000
--- a/perl-install/resize_fat/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
- 'MAKEFILE' => 'Makefile_c',
- 'NAME' => 'c_rewritten',
- 'OPTIMIZE' => '-Os',
- 'VERSION_FROM' => 'c_rewritten.pm', # finds $VERSION
- 'LIBS' => '', # e.g., '-lm'
- 'DEFINE' => '', # e.g., '-DHAVE_SOMETHING'
- 'INC' => '', # e.g., '-I/usr/include/other'
-);
diff --git a/perl-install/resize_fat/README b/perl-install/resize_fat/README
deleted file mode 100644
index 12b64dea9..000000000
--- a/perl-install/resize_fat/README
+++ /dev/null
@@ -1,8 +0,0 @@
-TODO:
-
-resize_fat::fat::update($fs) should be called before doing undoable things
-(before the sync in construct_dir_tree)
-
-BUGS:
-no known bugs :)
-if you found one, please mail pixel@mandrakesoft.com !!
diff --git a/perl-install/resize_fat/any.pm b/perl-install/resize_fat/any.pm
deleted file mode 100644
index f811e7159..000000000
--- a/perl-install/resize_fat/any.pm
+++ /dev/null
@@ -1,123 +0,0 @@
-package resize_fat::any; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($FREE $FILE $DIRECTORY $UNMOVEABLE);
-
-use common;
-use resize_fat::fat;
-use resize_fat::directory;
-use resize_fat::dir_entry;
-use resize_fat::c_rewritten;
-
-
-$FREE = 0;
-$FILE = 1;
-$DIRECTORY = 2;
-$UNMOVEABLE = 8;
-
-
-1;
-
-
-#- returns the number of clusters for a given filesystem type
-sub min_cluster_count($) {
- my ($fs) = @_;
- (1 << $ {{ FAT16 => 12, FAT32 => 12 }}{$fs->{fs_type}}) - 12;
-}
-sub max_cluster_count($) {
- my ($fs) = @_;
- (1 << $ {{ FAT16 => 16, FAT32 => 28 }}{$fs->{fs_type}}) - 11;
-}
-
-
-
-#- patch to get the function last_used that return the last used cluster of a fs.
-sub last_used($) {
- my ($fs) = @_;
-
- #- count in negative so absolute value count back to 2.
- foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if resize_fat::c_rewritten::flag(-$_) }
- die "any: empty FAT table of $fs->{nb_clusters} clusters";
-}
-#- patch to get the function last_unmoveable that return the last unmoveable cluster of a fs.
-sub last_unmoveable($) {
- my ($fs) = @_;
-
- #- count in negative so absolute value count back to 2.
- foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if 0x8 & resize_fat::c_rewritten::flag(-$_) }
-
- #- Oh at this point there are no unmoveable blocks!
- 2;
-}
-
-#- calculates the minimum size of a partition, in physical sectors
-sub min_size($) {
- my ($fs) = @_;
- my $count = $fs->{clusters}{count};
-
- #- directories are both in `used' and `dirs', so are counted twice
- #- It's done on purpose since we're moving all directories. So at the worse
- #- moment, 2 directories are there, but that way nothing wrong can happen :)
- my $min_cluster_count = max(2 + $count->{used} + $count->{bad} + $count->{dirs}, min_cluster_count($fs));
- $min_cluster_count = max($min_cluster_count, last_unmoveable($fs));
-
- my $size = $min_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
- divide($fs->{cluster_offset}, $SECTORSIZE) +
- 64*1024*1024 / $SECTORSIZE; #- help with such more sectors (ie 64Mb).
-
- #- help zindozs again with 512Mb+ at least else partition is ignored.
- if ($resize_fat::isFAT32) {
- $size = max($size, 524*1024*1024 / $SECTORSIZE);
- }
- $size;
-
-}
-#- calculates the maximum size of a partition, in physical sectors
-sub max_size($) {
- my ($fs) = @_;
-
- my $max_cluster_count = min($fs->{nb_fat_entries} - 2, max_cluster_count($fs));
-
- $max_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
- divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-#- calculates used size in order to avoid modifying anything.
-sub used_size($) {
- my ($fs) = @_;
-
- my $used_cluster_count = max(last_used($fs), min_cluster_count($fs));
-
- $used_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
- divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-
-#- fills in fat_flag_map in c_rewritten.
-#- Each FAT entry is flagged as either FREE, FILE or DIRECTORY.
-sub flag_clusters {
- my ($fs) = @_;
- my ($cluster, $curr_dir_name, $entry, $type, $nb_dirs);
-
- my $f = sub {
- ($curr_dir_name, $entry) = @_;
- $cluster = resize_fat::dir_entry::get_cluster($entry);
-
- if (resize_fat::dir_entry::is_file($entry)) {
- $type = $FILE;
- $type |= $UNMOVEABLE if resize_fat::dir_entry::is_unmoveable($entry);
- } elsif (resize_fat::dir_entry::is_directory($entry)) {
- $type = $DIRECTORY;
- } else { return }
-
- my $nb = resize_fat::c_rewritten::checkFat($cluster, $type, "$curr_dir_name/$entry->{name}");
- print "resize_fat:flag_clusters: check fat returned $nb of type $type for $curr_dir_name/$entry->{name}\n";
- $nb_dirs += $nb if $type == $DIRECTORY;
- 0;
- };
-
- #- this must call allocate_fat_flag that zeroes the buffer allocated.
- resize_fat::c_rewritten::allocate_fat_flag($fs->{nb_clusters} + 2);
-
- resize_fat::directory::traverse_all($fs, $f);
- $fs->{clusters}{count}{dirs} = $nb_dirs;
-}
diff --git a/perl-install/resize_fat/boot_sector.pm b/perl-install/resize_fat/boot_sector.pm
deleted file mode 100644
index c87328637..000000000
--- a/perl-install/resize_fat/boot_sector.pm
+++ /dev/null
@@ -1,110 +0,0 @@
-package resize_fat::boot_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-use resize_fat::any;
-use resize_fat::directory;
-
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a3 a8 S C S C S S C S S S I I I S S I S S a458 S";
-my @fields = (
- 'boot_jump', #- boot strap short or near jump
- 'system_id', #- Name - can be used to special case partition manager volumes
- 'sector_size', #- bytes per logical sector
- 'cluster_size_in_sectors', #- sectors/cluster
- 'nb_reserved', #- reserved sectors
- 'nb_fats', #- number of FATs
- 'nb_root_dir_entries', #- number of root directory entries
- 'small_nb_sectors', #- number of sectors: big_nb_sectors supersedes
- 'media', #- media code
- 'fat16_fat_length', #- sectors/FAT for FAT12/16
- 'sectors_per_track',
- 'nb_heads',
- 'nb_hidden', #- (unused)
- 'big_nb_sectors', #- number of sectors (if small_nb_sectors == 0)
-
-#- FAT32-only entries
- 'fat32_fat_length', #- size of FAT in sectors
- 'fat32_flags', #- bit8: fat mirroring,
- #- low4: active fat
- 'fat32_version', #- minor * 256 + major
- 'fat32_root_dir_cluster',
- 'info_offset_in_sectors',
- 'fat32_backup_sector',
-
-#- Common again...
- 'boot_code', #- Boot code (or message)
- 'boot_sign', #- 0xAA55
-);
-
-1;
-
-
-#- trimfs_init_boot_sector() - reads in the boot sector - gets important info out
-#- of boot sector, and puts in main structure - performs sanity checks - returns 1
-#- on success, 0 on failureparameters: filesystem an empty structure to fill.
-sub read($) {
- my ($fs) = @_;
-
- my $boot = eval { resize_fat::io::read($fs, 0, $SECTORSIZE) }; $@ and die "reading boot sector failed on device $fs->{fs_name}";
- @{$fs}{@fields} = unpack $format, $boot;
-
- $fs->{nb_sectors} = $fs->{small_nb_sectors} || $fs->{big_nb_sectors};
- $fs->{cluster_size} = $fs->{cluster_size_in_sectors} * $fs->{sector_size};
-
- $fs->{boot_sign} == 0xAA55 or die "Invalid signature for a MS-based filesystem.\n";
- $fs->{nb_sectors} < 32 and die "Too few sectors for viable file system\n";
- $fs->{nb_fats} == 2 or cdie "Weird number of FATs: $fs->{nb_fats}, not 2.\n";
- $fs->{sector_size} == 512 or cdie "Strange sector_size != 512\n";
-
- if ($fs->{fat16_fat_length}) {
- #- asserting FAT16, will be verified later on
- $resize_fat::isFAT32 = 0;
- $fs->{fs_type} = 'FAT16';
- $fs->{fs_type_size} = 16;
- $fs->{fat_length} = $fs->{fat16_fat_length};
- $resize_fat::bad_cluster_value = 0xfff7; #- 2**16 - 1
- } else {
- $resize_fat::isFAT32 = 1;
- $fs->{fs_type} = 'FAT32';
- $fs->{fs_type_size} = 32;
- $fs->{fat_length} = $fs->{fat32_fat_length};
-
- $fs->{nb_root_dir_entries} = 0;
- $fs->{info_offset} = $fs->{info_offset_in_sectors} * $fs->{sector_size};
- $resize_fat::bad_cluster_value = 0x0ffffff7;
- }
-
- $fs->{fat_offset} = $fs->{nb_reserved} * $fs->{sector_size};
- $fs->{fat_size} = $fs->{fat_length} * $fs->{sector_size};
- $fs->{root_dir_offset} = $fs->{fat_offset} + $fs->{fat_size} * $fs->{nb_fats};
- $fs->{root_dir_size} = $fs->{nb_root_dir_entries} * resize_fat::directory::entry_size();
- $fs->{cluster_offset} = $fs->{root_dir_offset} + $fs->{root_dir_size} - 2 * $fs->{cluster_size};
-
- $fs->{nb_fat_entries} = divide($fs->{fat_size}, $fs->{fs_type_size} / 8);
-
- #- - 2 because clusters 0 & 1 doesn't exist
- $fs->{nb_clusters} = divide($fs->{nb_sectors} * $fs->{sector_size} - $fs->{cluster_offset}, $fs->{cluster_size}) - 2;
-
- $fs->{dir_entries_per_cluster} = divide($fs->{cluster_size}, psizeof($format));
-
-#- $fs->{nb_clusters} >= resize_fat::any::min_cluster_count($fs) or die "error: not enough sectors for a $fs->{fs_type}\n";
- $fs->{nb_clusters} < resize_fat::any::max_cluster_count($fs) or die "error: too many sectors for a $fs->{fs_type}\n";
-}
-
-sub write($) {
- my ($fs) = @_;
- my $boot = pack($format, @{$fs}{@fields});
-
- eval { resize_fat::io::write($fs, 0, $SECTORSIZE, $boot) }; $@ and die "writing the boot sector failed on device $fs->{fs_name}";
-
- if ($resize_fat::isFAT32) {
- #- write backup
- eval { resize_fat::io::write($fs, $fs->{fat32_backup_sector} * $SECTORSIZE, $SECTORSIZE, $boot) };
- $@ and die "writing the backup boot sector (#$fs->{fat32_backup_sector}) failed on device $fs->{fs_name}";
- }
-}
diff --git a/perl-install/resize_fat/c_rewritten.pm b/perl-install/resize_fat/c_rewritten.pm
deleted file mode 100644
index d74ecb5d3..000000000
--- a/perl-install/resize_fat/c_rewritten.pm
+++ /dev/null
@@ -1,14 +0,0 @@
-package resize_fat::c_rewritten; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-
-require DynaLoader;
-
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-
-bootstrap resize_fat::c_rewritten $VERSION;
-
-1;
-
diff --git a/perl-install/resize_fat/c_rewritten.xs b/perl-install/resize_fat/c_rewritten.xs
deleted file mode 100644
index 92361097d..000000000
--- a/perl-install/resize_fat/c_rewritten.xs
+++ /dev/null
@@ -1,259 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-
-/* set by scan_fat, used by next */
-short *fat = NULL;
-char *fat_flag_map = NULL;
-unsigned int *fat_remap = NULL;
-int fat_remap_size;
-int type_size, nb_clusters, bad_cluster_value;
-
-void free_all() {
-#define FREE(p) if (p) free(p), p = NULL;
- FREE(fat);
- FREE(fat_flag_map);
- FREE(fat_remap);
-#undef FREE
-}
-
-unsigned int next(unsigned int cluster) {
- short *p = fat + type_size * cluster;
- if (!fat) {
- free_all();
- croak("fat::next: trying to use null pointer");
- }
- if (cluster >= nb_clusters + 2) {
- free_all();
- croak("fat::next: cluster %d outside filesystem", cluster);
- }
- return type_size == 1 ? *p : *((unsigned int *) p);
-}
-
-void set_next(unsigned int cluster, unsigned int val) {
- short *p = fat + type_size * cluster;
- if (!fat) {
- free_all();
- croak("fat::set_next: trying to use null pointer");
- }
- if (cluster >= nb_clusters + 2) {
- free_all();
- croak("fat::set_next: cluster %d outside filesystem", cluster);
- }
- type_size == 1 ? *p : *((unsigned int *) p) = val;
-}
-
-MODULE = resize_fat::c_rewritten PACKAGE = resize_fat::c_rewritten
-
-void
-read_fat(fd, offset, size, magic)
- int fd
- int offset
- int size
- unsigned char magic
- PPCODE:
-{
- fat = (short *) malloc(size);
- if (!fat) {
- free_all();
- croak("read_fat: not enough memory");
- }
- if (lseek(fd, offset, SEEK_SET) != offset ||
- read(fd, fat, size) != size) {
- free_all();
- croak("read_fat: reading FAT failed");
- }
- if (magic != *(unsigned char *) fat) {
- free_all();
- croak("read_fat: FAT has invalid signature");
- }
-}
-
-void
-write_fat(fd, size)
- int fd
- int size
- PPCODE:
-{
- if (write(fd, fat, size) != size) {
- free_all();
- croak("write_fat: write failed");
- }
-}
-
-void
-free_all()
- PPCODE:
- free_all();
-
-void
-scan_fat(nb_clusters_, type_size_)
- int nb_clusters_
- int type_size_
- PPCODE:
-{
- unsigned int v;
- int free = 0, bad = 0, used = 0;
- short *p;
-
- type_size = type_size_; nb_clusters = nb_clusters_;
- bad_cluster_value = type_size == 32 ? 0x0ffffff7 : 0xfff7;
-
- if (type_size % 16) {
- free_all();
- croak("scan_fat: unable to handle FAT%d", type_size);
- }
- type_size /= 16;
-
- for (p = fat + 2 * type_size; p < fat + type_size * (nb_clusters + 2); p += type_size) {
- v = type_size == 1 ? *p : *((unsigned int *) p);
-
- if (v == 0) free++;
- else if (v == bad_cluster_value) bad++;
- }
- used = nb_clusters - free - bad;
- EXTEND(SP, 3);
- PUSHs(sv_2mortal(newSViv(free)));
- PUSHs(sv_2mortal(newSViv(bad)));
- PUSHs(sv_2mortal(newSViv(used)));
-}
-
-unsigned int
-next(unused, cluster)
- void *unused
- unsigned int cluster
- CODE:
- RETVAL = next(cluster);
- OUTPUT:
- RETVAL
-
-void
-set_next(unused, cluster, val)
- void *unused
- unsigned int cluster
- unsigned int val
- CODE:
- set_next(cluster, val);
-
-void
-allocate_fat_flag(size)
- int size
- CODE:
- fat_flag_map = calloc(size, 1);
- if (!fat_flag_map) {
- free_all();
- croak("allocate_fat_flag: not enough memory");
- }
-
-int
-checkFat(cluster, type, name)
- unsigned int cluster
- int type
- char *name
- CODE:
- int nb = 0;
-
- if (!fat_flag_map) {
- free_all();
- croak("Bad FAT: trying to use null pointer");
- }
- for (; cluster < bad_cluster_value; cluster = next(cluster)) {
- if (cluster == 0) {
- free_all();
- croak("Bad FAT: unterminated chain for %s\n", name);
- }
- if (cluster >= nb_clusters + 2) {
- free_all();
- croak("Bad FAT: chain outside filesystem for %s\n", name);
- }
- if (fat_flag_map[cluster]) {
- free_all();
- croak("Bad FAT: cluster %d is cross-linked for %s\n", cluster, name);
- }
- fat_flag_map[cluster] = type;
- nb++;
- }
- RETVAL = nb;
- OUTPUT:
- RETVAL
-
-unsigned int
-flag(cluster)
- unsigned int cluster
- CODE:
- if (!fat_flag_map) {
- free_all();
- croak("Bad FAT: trying to use null pointer");
- }
- if (cluster >= nb_clusters + 2) {
- free_all();
- croak("Bad FAT: going outside filesystem");
- }
- RETVAL = fat_flag_map[cluster];
- OUTPUT:
- RETVAL
-
-void
-set_flag(cluster, flag)
- unsigned int cluster
- int flag
- CODE:
- if (!fat_flag_map) {
- free_all();
- croak("Bad FAT: trying to use null pointer");
- }
- if (cluster >= nb_clusters + 2) {
- free_all();
- croak("Bad FAT: going outside filesystem");
- }
- fat_flag_map[cluster] = flag;
-
-void
-allocate_fat_remap(size)
- int size
- CODE:
- fat_remap_size = size;
- fat_remap = (unsigned int *) calloc(size, sizeof(unsigned int *));
- if (!fat_remap) {
- free_all();
- croak("allocate_fat_remap: not enough memory");
- }
-
-unsigned int
-fat_remap(cluster)
- unsigned int cluster
- CODE:
- if (!fat_remap) {
- free_all();
- croak("fat_remap: trying to use null pointer");
- }
- if (cluster >= bad_cluster_value) {
- RETVAL = cluster; /* special cases */
- } else {
- if (cluster >= fat_remap_size) {
- free_all();
- croak("fat_remap: cluster %d >= %d in fat_remap", cluster, fat_remap_size);
- }
- RETVAL = fat_remap[cluster];
- }
- OUTPUT:
- RETVAL
-
-void
-set_fat_remap(cluster, val)
- unsigned int cluster
- unsigned int val
- CODE:
- if (!fat_remap) {
- free_all();
- croak("set_fat_remap: trying to use null pointer");
- }
- if (cluster >= fat_remap_size) {
- free_all();
- croak("set_fat_remap: cluster %d >= %d in set_fat_remap", cluster, fat_remap_size);
- }
- if (val < bad_cluster_value && val >= fat_remap_size) {
- free_all();
- croak("set_fat_remap: remapping cluster %d to cluster %d >= %d in set_fat_remap", cluster, val, fat_remap_size);
- }
- fat_remap[cluster] = val;
diff --git a/perl-install/resize_fat/dir_entry.pm b/perl-install/resize_fat/dir_entry.pm
deleted file mode 100644
index b39c72094..000000000
--- a/perl-install/resize_fat/dir_entry.pm
+++ /dev/null
@@ -1,77 +0,0 @@
-package resize_fat::dir_entry; # $Id$
-
-use diagnostics;
-use strict;
-
-
-my $DELETED_FLAG = 0xe5;
-
-my $READ_ONLY_ATTR = 0x01;
-my $HIDDEN_ATTR = 0x02;
-my $SYSTEM_ATTR = 0x04;
-my $VOLUME_LABEL_ATTR = 0x08;
-my $VFAT_ATTR = 0x0f;
-my $DIRECTORY_ATTR = 0x10;
-
-1;
-
-sub get_cluster($) {
- my ($entry) = @_;
- $entry->{first_cluster} + ($resize_fat::isFAT32 ? $entry->{first_cluster_high} * (1 << 16) : 0);
-}
-sub set_cluster($$) {
- my ($entry, $val) = @_;
- $entry->{first_cluster} = $val & (1 << 16) - 1;
- $entry->{first_cluster_high} = $val >> 16 if $resize_fat::isFAT32;
-}
-
-sub is_unmoveable($) {
- my ($entry) = @_;
- $entry->{attributes} & $HIDDEN_ATTR || $entry->{attributes} & $SYSTEM_ATTR;
-}
-
-sub is_directory($) {
- my ($entry) = @_;
- $entry->{attributes} & $DIRECTORY_ATTR && $entry->{name} !~ /^\.\.? / && !is_special_entry($entry);
-}
-
-sub is_volume($) {
- my ($entry) = @_;
- !is_special_entry($entry) && $entry->{attributes} & $VOLUME_LABEL_ATTR;
-}
-
-sub is_file($) {
- my ($entry) = @_;
- !is_special_entry($entry) && !is_directory($entry) && !is_volume($entry) && $entry->{length};
-}
-
-
-sub is_special_entry($) {
- my ($entry) = @_;
- my ($c) = unpack "C", $entry->{name};
-
- #- skip empty slots, deleted files, and 0xF6?? (taken from kernel)
- $c == 0 || $c == $DELETED_FLAG || $c == 0xF6 and return 1;
-
- $entry->{attributes} == $VFAT_ATTR and return 1;
- 0;
-}
-
-
-#- return true if entry has been modified
-#- curr_dir_name is added to contains current directory name, "" for root.
-sub remap {
- my ($curr_dir_name, $entry) = @_;
-
- is_special_entry($entry) and return;
-
- my $cluster = get_cluster($entry);
- my $new_cluster = resize_fat::c_rewritten::fat_remap($cluster);
-
- #-print "remapping cluster ", get_cluster($entry), " to $new_cluster";
-
- $new_cluster == $cluster and return; #- no need to modify
-
- set_cluster($entry, $new_cluster);
- 1;
-}
diff --git a/perl-install/resize_fat/directory.pm b/perl-install/resize_fat/directory.pm
deleted file mode 100644
index 1f2b1ede6..000000000
--- a/perl-install/resize_fat/directory.pm
+++ /dev/null
@@ -1,79 +0,0 @@
-package resize_fat::directory; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::dir_entry;
-use resize_fat::io;
-
-
-my $format = "a8 a3 C C C S7 I";
-my @fields = (
- 'name',
- 'extension',
- 'attributes',
- 'is_upper_case_name',
- 'creation_time_low', #- milliseconds
- 'creation_time_high',
- 'creation_date',
- 'access_date',
- 'first_cluster_high', #- for FAT32
- 'time',
- 'date',
- 'first_cluster',
- 'length',
-);
-my $psizeof_format = psizeof($format);
-
-1;
-
-sub entry_size { $psizeof_format }
-
-#- call `f' for each entry of the directory
-#- if f return true, then modification in the entry are taken back
-sub traverse($$$) {
- my ($directory, $curr_dir_name, $f) = @_;
-
- for (my $i = 0;; $i++) {
- my $raw = \substr($directory, $i * $psizeof_format, $psizeof_format);
-
- #- empty entry means end of directory
- $$raw =~ /^\0*$/ and return $directory;
-
- my $entry; @{$entry}{@fields} = unpack $format, $$raw;
-
- &$f($curr_dir_name, $entry)
- and $$raw = pack $format, @{$entry}{@fields};
- }
- $directory;
-}
-
-sub traverse_all($$) {
- my ($fs, $f) = @_;
-
- my $traverse_all; $traverse_all = sub {
- my ($curr_dir_name, $entry) = @_;
-
- &$f($curr_dir_name, $entry);
-
- resize_fat::dir_entry::is_directory($entry)
- and traverse(resize_fat::io::read_file($fs, resize_fat::dir_entry::get_cluster($entry)), "$curr_dir_name/$entry->{name}", $traverse_all);
-
- undef; #- no need to write back (cf traverse)
- };
-
- my $directory = $resize_fat::isFAT32 ?
- resize_fat::io::read_file($fs, $fs->{fat32_root_dir_cluster}) :
- resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size});
- traverse($directory, "", $traverse_all);
- undef $traverse_all; #- circular reference is no good for perl's poor GC :(
-}
-
-
-#- function used by construct_dir_tree to translate the `cluster' fields in each
-#- directory entry
-sub remap($$) {
- my ($fs, $directory) = @_;
- traverse($directory, "", \&resize_fat::dir_entry::remap);
-}
diff --git a/perl-install/resize_fat/fat.pm b/perl-install/resize_fat/fat.pm
deleted file mode 100644
index 31643f0a3..000000000
--- a/perl-install/resize_fat/fat.pm
+++ /dev/null
@@ -1,138 +0,0 @@
-package resize_fat::fat; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::any;
-use resize_fat::io;
-use resize_fat::c_rewritten;
-
-1;
-
-sub read($) {
- my ($fs) = @_;
-
- resize_fat::c_rewritten::read_fat(fileno $fs->{fd}, $fs->{fat_offset}, $fs->{fat_size}, $fs->{media});
-
- @{$fs->{clusters}{count}}{qw(free bad used)} =
- resize_fat::c_rewritten::scan_fat($fs->{nb_clusters}, $fs->{fs_type_size});
-}
-
-sub write($) {
- my ($fs) = @_;
-
- sysseek $fs->{fd}, $fs->{fat_offset}, 0 or die "write_fat: seek failed";
- foreach (1..$fs->{nb_fats}) {
- resize_fat::c_rewritten::write_fat(fileno $fs->{fd}, $fs->{fat_size});
- }
-}
-
-
-
-#- allocates where all the clusters will be moved to. Clusters before cut_point
-#- remain in the same position, however cluster that are part of a directory are
-#- moved regardless (this is a mechanism to prevent data loss) (cut_point is the
-#- first cluster that won't occur in the new fs)
-sub allocate_remap {
- my ($fs, $cut_point) = @_;
- my ($cluster, $new_cluster);
- my $remap = sub { resize_fat::c_rewritten::set_fat_remap($cluster, $new_cluster) };
- my $get_new = sub {
- $new_cluster = get_free($fs);
- 0 < $new_cluster && $new_cluster < $cut_point or die "no free clusters";
- set_eof($fs, $new_cluster); #- mark as used
- #-log::ld("resize_fat: [$cluster,", &next($fs, $cluster), "...]->$new_cluster...");
- };
-
- #- this must call allocate_fat_remap that zeroes the buffer allocated.
- resize_fat::c_rewritten::allocate_fat_remap($fs->{nb_clusters} + 2);
-
- $fs->{last_free_cluster} = 2;
- for ($cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
- if ($cluster < $cut_point) {
- if (resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY) {
- &$get_new();
- } else {
- $new_cluster = $cluster;
- }
- &$remap();
- } elsif (!is_empty(&next($fs, $cluster))) {
- &$get_new();
- &$remap();
- }
- }
-}
-
-
-#- updates the fat for the resized filesystem
-sub update {
- my ($fs) = @_;
-
- for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
- if (resize_fat::c_rewritten::flag($cluster)) {
- my $old_next = &next($fs, $cluster);
- my $new = resize_fat::c_rewritten::fat_remap($cluster);
- my $new_next = resize_fat::c_rewritten::fat_remap($old_next);
-
- set_available($fs, $cluster);
-
- is_eof($old_next) ?
- set_eof($fs, $new) :
- set_next ($fs, $new, $new_next);
- }
- }
-}
-
-
-sub endianness16($) { (($_[0] & 0xff) << 8) + ($_[0] >> 8); }
-sub endianness($$) {
- my ($val, $nb_bits) = @_;
- my $r = 0;
- for (; $nb_bits > 0; $nb_bits -= 8) {
- $r <<= 8;
- $r += $val & 0xff;
- $val >>= 8;
- }
- $nb_bits < 0 and die "error: endianness only handle numbers divisible by 8";
- $r;
-}
-
-*next = \&resize_fat::c_rewritten::next;
-*set_next = \&resize_fat::c_rewritten::set_next;
-
-
-
-sub get_free($) {
- my ($fs) = @_;
- foreach (my $i = 0; $i < $fs->{nb_clusters}; $i++) {
- my $cluster = ($i + $fs->{last_free_cluster} - 2) % $fs->{nb_clusters} + 2;
- is_available(&next($fs, $cluster)) and return $fs->{last_free_cluster} = $cluster;
- }
- die "no free clusters";
-}
-
-#- returns true if <cluster> represents an EOF marker
-sub is_eof($) {
- my ($cluster) = @_;
- $cluster >= $resize_fat::bad_cluster_value;
-}
-sub set_eof($$) {
- my ($fs, $cluster) = @_;
- set_next ($fs, $cluster, $resize_fat::bad_cluster_value + 1);
-}
-
-#- returns true if <cluster> is empty. Note that this includes bad clusters.
-sub is_empty($) {
- my ($cluster) = @_;
- $cluster == 0 || $cluster == $resize_fat::bad_cluster_value;
-}
-
-#- returns true if <cluster> is available.
-sub is_available($) {
- my ($cluster) = @_;
- $cluster == 0;
-}
-sub set_available($$) {
- my ($fs, $cluster) = @_;
- set_next ($fs, $cluster, 0);
-}
diff --git a/perl-install/resize_fat/info_sector.pm b/perl-install/resize_fat/info_sector.pm
deleted file mode 100644
index 35449cedc..000000000
--- a/perl-install/resize_fat/info_sector.pm
+++ /dev/null
@@ -1,37 +0,0 @@
-package resize_fat::info_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a484 I I I a16";
-my @fields = (
- 'unused',
- 'signature', #- should be 0x61417272
- 'free_clusters', #- -1 for unknown
- 'next_cluster', #- most recently allocated cluster
- 'unused2',
-);
-
-1;
-
-
-sub read($) {
- my ($fs) = @_;
- my $info = resize_fat::io::read($fs, $fs->{info_offset}, psizeof($format));
- @{$fs->{info_sector}}{@fields} = unpack $format, $info;
- $fs->{info_sector}{signature} == 0x61417272 or die "Invalid information sector signature\n";
-}
-
-sub write($) {
- my ($fs) = @_;
- $fs->{info_sector}{free_clusters} = $fs->{clusters}->{count}->{free};
- $fs->{info_sector}{next_cluster} = 2;
-
- my $info = pack $format, @{$fs->{info_sector}}{@fields};
-
- resize_fat::io::write($fs, $fs->{info_offset}, psizeof($format), $info);
-}
diff --git a/perl-install/resize_fat/io.pm b/perl-install/resize_fat/io.pm
deleted file mode 100644
index 7643a0953..000000000
--- a/perl-install/resize_fat/io.pm
+++ /dev/null
@@ -1,71 +0,0 @@
-package resize_fat::io; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::fat;
-use c;
-
-1;
-
-
-sub read($$$) {
- my ($fs, $pos, $size) = @_;
- print "reading $size bytes at $pos\n";
- my $buf = "\0" x $size;
- sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
- sysread $fs->{fd}, $buf, $size or die "reading at byte #$pos failed on device $fs->{fs_name}";
- $buf;
-}
-sub write($$$$) {
- my ($fs, $pos, $size, $buf) = @_;
- sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
- syswrite $fs->{fd}, $buf or die "writing at byte #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_cluster($$) {
- my ($fs, $cluster) = @_;
- my $buf;
- my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
- c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
- sysread $fs->{fd}, $buf, $fs->{cluster_size} or die "reading at sector #$pos failed on device $fs->{fs_name}";
- $buf;
-}
-sub write_cluster($$$) {
- my ($fs, $cluster, $buf) = @_;
- my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
- c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
- syswrite $fs->{fd}, $buf or die "writing at sector #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_file($$) {
- my ($fs, $cluster) = @_;
- my $buf = '';
-
- for (; !resize_fat::fat::is_eof($cluster); $cluster = resize_fat::fat::next ($fs, $cluster)) {
- $cluster == 0 and die "Bad FAT: unterminated chain\n";
- $buf .= read_cluster($fs, $cluster);
- }
- $buf;
-}
-
-sub check_mounted($) {
- my ($f) = @_;
-
- local *F;
- open F, "/proc/mounts" or die "error opening /proc/mounts\n";
- foreach (<F>) {
- /^$f\s/ and die "device is mounted";
- }
-}
-
-sub open($) {
- my ($fs) = @_;
-
- check_mounted($fs->{device});
-
- sysopen F, $fs->{fs_name}, 2 or sysopen F, $fs->{fs_name}, 0 or die "error opening device $fs->{fs_name} for writing\n";
- $fs->{fd} = *F;
-}
diff --git a/perl-install/resize_fat/main.pm b/perl-install/resize_fat/main.pm
deleted file mode 100644
index 81dfb6b3f..000000000
--- a/perl-install/resize_fat/main.pm
+++ /dev/null
@@ -1,186 +0,0 @@
-#!/usr/bin/perl
-
-# DiskDrake
-# Copyright (C) 1999 MandrakeSoft (pixel@mandrakesoft.com)
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# This is mainly a perl rewrite of the work of Andrew Clausen (libresize)
-
-package resize_fat::main; # $Id$
-
-use diagnostics;
-use strict;
-
-use log;
-use common;
-use MDK::Common::System;
-use resize_fat::boot_sector;
-use resize_fat::info_sector;
-use resize_fat::directory;
-use resize_fat::io;
-use resize_fat::fat;
-use resize_fat::any;
-
-
-1;
-
-#- - reads in the boot sector/partition info., and tries to make some sense of it
-sub new($$$) {
- my ($type, $device, $fs_name) = @_;
- my $fs = { device => $device, fs_name => $fs_name } ;
-
- eval {
- resize_fat::io::open($fs);
- resize_fat::boot_sector::read($fs);
- $resize_fat::isFAT32 and eval { resize_fat::info_sector::read($fs) };
- resize_fat::fat::read($fs);
- resize_fat::any::flag_clusters($fs);
- };
- if ($@) {
- close $fs->{fd};
- die;
- }
- bless $fs, $type;
-}
-
-sub DESTROY {
- my ($fs) = @_;
- close $fs->{fd};
- resize_fat::c_rewritten::free_all();
-}
-
-#- copy all clusters >= <start_cluster> to a new place on the partition, less
-#- than <start_cluster>. Only copies files, not directories.
-#- (use of buffer needed because the seeks slow like hell the hard drive)
-sub copy_clusters {
- my ($fs, $cluster) = @_;
- my @buffer;
- my $flush = sub {
- while (@buffer) {
- my $cluster = shift @buffer;
- resize_fat::io::write_cluster($fs, $cluster, shift @buffer);
- }
- };
- for (; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
- resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::FILE or next;
- push @buffer,
- resize_fat::c_rewritten::fat_remap($cluster),
- resize_fat::io::read_cluster($fs, $cluster);
- @buffer > 50 and &$flush();
- }
- &$flush();
-}
-
-#- Constructs the new directory tree to match the new file locations.
-sub construct_dir_tree {
- my ($fs) = @_;
-
- if ($resize_fat::isFAT32) {
- #- fat32's root must remain in the first 64k clusters
- #- so don't set it as DIRECTORY, it will be specially handled
- resize_fat::c_rewritten::set_flag($fs->{fat32_root_dir_cluster}, $resize_fat::any::FREE);
- }
-
- for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
- resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY or next;
-
- resize_fat::io::write_cluster($fs,
- resize_fat::c_rewritten::fat_remap($cluster),
- resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
- }
-
- MDK::Common::System::sync();
-
- #- until now, only free clusters have been written. it's a null operation if we stop here.
- #- it means no corruption :)
- #
- #- now we must be as fast as possible!
-
- #- remapping non movable root directory
- if ($resize_fat::isFAT32) {
- my $cluster = $fs->{fat32_root_dir_cluster};
-
- resize_fat::io::write_cluster($fs,
- resize_fat::c_rewritten::fat_remap($cluster),
- resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
- } else {
- resize_fat::io::write($fs, $fs->{root_dir_offset}, $fs->{root_dir_size},
- resize_fat::directory::remap($fs, resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size})));
- }
-}
-
-sub min_size($) { &resize_fat::any::min_size }
-sub max_size($) { &resize_fat::any::max_size }
-sub used_size($) { &resize_fat::any::used_size }
-
-#- resize
-#- - size is in sectors
-#- - checks boundaries before starting
-#- - copies all data beyond new_cluster_count behind the frontier
-sub resize {
- my ($fs, $size) = @_;
-
- my ($min, $max) = (min_size($fs), max_size($fs));
-
- $size += $min if $size =~ /^\+/;
-
- $size >= $min or die "Minimum filesystem size is $min sectors";
- $size <= $max or die "Maximum filesystem size is $max sectors";
-
- log::l("resize_fat: Partition size will be ". ($size * $SECTORSIZE >> 20) ."Mb (well exactly ${size} sectors)");
-
- my $new_data_size = $size * $SECTORSIZE - $fs->{cluster_offset};
- my $new_nb_clusters = divide($new_data_size, $fs->{cluster_size});
- my $used_size = used_size($fs);
-
- log::l("resize_fat: Break point for moving files is ". ($used_size * $SECTORSIZE >> 20) ." Mb ($used_size sectors)");
- if ($size < $used_size) {
- log::l("resize_fat: Allocating new clusters");
- resize_fat::fat::allocate_remap($fs, $new_nb_clusters);
-
- log::l("resize_fat: Copying files");
- copy_clusters($fs, $new_nb_clusters);
-
- log::l("resize_fat: Copying directories");
- construct_dir_tree($fs);
-
- log::l("Writing new FAT...");
- resize_fat::fat::update($fs);
- resize_fat::fat::write($fs);
- } else {
- log::l("resize_fat: Nothing need to be moved");
- }
-
- $fs->{nb_sectors} = $size;
- $fs->{nb_clusters} = $new_nb_clusters;
- $fs->{clusters}{count}->{free} =
- $fs->{nb_clusters} - $fs->{clusters}{count}->{used} - $fs->{clusters}->{count}->{bad} - 2;
-
- $fs->{system_id} = 'was here!';
- $fs->{small_nb_sectors} = 0;
- $fs->{big_nb_sectors} = $size;
-
- log::l("resize_fat: Writing new boot sector...");
-
- resize_fat::boot_sector::write($fs);
-
- $resize_fat::isFAT32 and eval { resize_fat::info_sector::write($fs) }; #- doesn't matter if this fails - its pretty useless!
-
- MDK::Common::System::sync();
- close $fs->{fd};
- log::l("resize_fat: done");
-}
-
diff --git a/perl-install/run_program.pm b/perl-install/run_program.pm
deleted file mode 100644
index 2db504bec..000000000
--- a/perl-install/run_program.pm
+++ /dev/null
@@ -1,68 +0,0 @@
-package run_program; # $Id$
-
-use diagnostics;
-use strict;
-
-use log;
-
-1;
-
-sub run_or_die {
- my ($name, @args) = @_;
- run($name, @args) or die "$name failed\n";
-}
-sub rooted_or_die {
- my ($root, $name, @args) = @_;
- rooted($root, $name, @args) or die "$name failed\n";
-}
-sub run { rooted('', @_) }
-
-sub rooted {
- my ($root, $name, @args) = @_;
- my $str = ref $name ? $name->[0] : $name;
- log::l("running: $str @args" . ($root ? " with root $root" : ""));
-
- return 1 if $root && $<;
-
- $root ? $root .= '/' : ($root = '');
- install_any::check_prog (ref $name ? $name->[0] : $name) if !$root && $::isInstall;
-
- if (my $pid = fork) {
- waitpid $pid, 0;
- return $? == 0;
- }
- {
- my ($stdout, $stdoutm, $stderr, $stderrm);
- ($stdoutm, $stdout, @args) = @args if $args[0] =~ /^>>?$/;
- ($stderrm, $stderr, @args) = @args if $args[0] =~ /^2>>?$/;
-
- if ($stderr) {
- $stderrm =~ s/2//;
- open STDERR, "$stderrm $root$stderr" or die "run_program can't output in $root$stderr (mode `$stderrm')";
- } elsif ($::isInstall) {
- open STDERR, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die "run_program can't log, give me access to /tmp/ddebug.log";
- }
- if ($stdout) {
- open STDOUT, "$stdoutm $root$stdout" or die "run_program can't output in $root$stdout (mode `$stdoutm')";
- } elsif ($::isInstall) {
- open STDOUT, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die "run_program can't log, give me access to /tmp/ddebug.log";
- }
-
- $root and chroot $root;
- chdir "/";
-
- if (ref $name) {
- unless (exec { $name->[0] } $name->[1], @args) {
- log::l("exec of $name->[0] failed: $!");
- c::_exit(128);
- }
- } else {
- unless (exec $name, @args) {
- log::l("exec of $name failed: $!");
- c::_exit(128);
- }
-
- }
- }
-
-}
diff --git a/perl-install/sbus_probing/main.pm b/perl-install/sbus_probing/main.pm
deleted file mode 100644
index 4aed43459..000000000
--- a/perl-install/sbus_probing/main.pm
+++ /dev/null
@@ -1,138 +0,0 @@
-package sbus_probing::main; # $Id$
-
-use c;
-use log;
-use common;
-use modules;
-
-my %sbus_table_network = (
- hme => [ "Sun Happy Meal Ethernet", "sunhme" ],
- le => [ "Sun Lance Ethernet", "ignore:lance" ],
- qe => [ "Sun Quad Ethernet", "sunqe" ],
- mlanai => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
- myri => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
- );
-my %sbus_table_scsi = (
- soc => [ "Sun SPARCStorage Array", "fc4:soc:pluto" ],
- socal => [ "Sun Enterprise Network Array", "fc4:socal:fcal" ],
- esp => [ "Sun Enhanced SCSI Processor (ESP)", "ignore:esp" ],
- fas => [ "Sun Swift (ESP)", "ignore:esp" ],
- ptisp => [ "Performance Technologies ISP", "qlogicpti" ],
- isp => [ "QLogic ISP", "qlogicpti" ],
- );
-my %sbus_table_audio = (
- audio => [ "AMD7930", "amd7930" ],
- CS4231 => [ "CS4231 APC DMA (SBUS)", "cs4231" ],
- CS4231_PCI => [ "CS4231 EB2 DMA (PCI)", "cs4231" ],
- );
-my %sbus_table_video = (
- bwtwo => [ "Sun|Monochrome (bwtwo)", "Server:SunMono" ],
- cgthree => [ "Sun|Color3 (cgthree)", "Server:Sun" ],
- cgeight => [ "Sun|CG8/RasterOps", "Server:Sun" ],
- cgtwelve => [ "Sun|GS (cgtwelve)", "Server:Sun24" ],
- gt => [ "Sun|Graphics Tower", "Server:Sun24" ],
- mgx => [ "Sun|Quantum 3D MGXplus", "Server:Sun24" ],
- mgx_4M => [ "Sun|Quantum 3D MGXplus with 4M VRAM", "Server:Sun24" ],
- cgsix => [ "Sun|Unknown GX", "Server:Sun" ],
- cgsix_dbl => [ "Sun|Double Width GX", "Server:Sun" ],
- cgsix_sgl => [ "Sun|Single Width GX", "Server:Sun" ],
- cgsix_t1M => [ "Sun|Turbo GX with 1M VSIMM", "Server:Sun" ],
- cgsix_tp => [ "Sun|Turbo GX Plus", "Server:Sun" ],
- cgsix_t => [ "Sun|Turbo GX", "Server:Sun" ],
- cgfourteen => [ "Sun|SX", "Server:Sun24" ],
- cgfourteen_4M => [ "Sun|SX with 4M VSIMM", "Server:Sun24" ],
- cgfourteen_8M => [ "Sun|SX with 8M VSIMM", "Server:Sun24" ],
- leo => [ "Sun|ZX or Turbo ZX", "Server:Sun24" ],
- leo_t => [ "Sun|Turbo ZX", "Server:Sun24" ],
- tcx => [ "Sun|TCX (S24)", "Server:Sun24" ],
- tcx_8b => [ "Sun|TCX (8bit)", "Server:Sun" ],
- afb => [ "Sun|Elite3D", "Server:Sun24" ],
- afb_btx03 => [ "Sun|Elite3D-M6 Horizontal", "Server:Sun24" ],
- ffb => [ "Sun|FFB", "Server:Sun24" ],
- ffb_btx08 => [ "Sun|FFB 67Mhz Creator", "Server:Sun24" ],
- ffb_btx0b => [ "Sun|FFB 67Mhz Creator 3D", "Server:Sun24" ],
- ffb_btx1b => [ "Sun|FFB 75Mhz Creator 3D", "Server:Sun24" ],
- ffb_btx20 => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
- ffb_btx28 => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
- ffb_btx23 => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
- ffb_btx2b => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
- ffb_btx30 => [ "Sun|FFB2+ Vertical Creator", "Server:Sun24" ],
- ffb_btx33 => [ "Sun|FFB2+ Vertical Creator 3D", "Server:Sun24" ],
- ffb_btx40 => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
- ffb_btx48 => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
- ffb_btx43 => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
- ffb_btx4b => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
- );
-
-1;
-
-sub prom_getint($) { unpack "I", c::prom_getproperty($_[0]) }
-
-#- update $@sbus_probed according to SBUS detection.
-sub prom_walk($$$$) {
- my ($sbus_probed, $node, $sbus, $ebus) = @_;
- my ($prob_name, $prob_type) = (c::prom_getstring("name"), c::prom_getstring("device_type"));
- my ($nextnode, $nsbus, $nebus) = (undef, $sbus, $ebus);
-
- #- probe for network devices.
- if ($sbus && $prob_type eq 'network') {
- $prob_name =~ s/[A-Z,]*(.*)/$1/;
- $sbus_table_network{$prob_name} and push @$sbus_probed, [ "NETWORK", @{$sbus_table_network{$prob_name}} ];
- #- TODO for Sun Quad Ethernet (qe)
- }
-
- #- probe for scsi devices.
- if ($sbus && ($prob_type eq 'scsi' || $prob_name =~ /^(soc|socal)$/)) {
- $prob_name =~ s/[A-Z,]*(.*)/$1/;
- $sbus_table_scsi{$prob_name} and push @$sbus_probed, [ "SCSI", @{$sbus_table_scsi{$prob_name}} ];
- }
-
- #- probe for audio devices, there are no type to check here.
- if ($sbus_table_audio{$prob_name}) {
- $prob_name =~ /,/ and $prob_name =~ s/[A-Z,]*(.*)/$1/;
- my $ext = $prob_name eq 'CS4231' && $ebus && "_PCI";
- $sbus_table_audio{$prob_name . $ext} ?
- push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name . $ext}} ] :
- push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name}} ];
- }
-
- #- probe for video devices.
- if ($prob_type eq 'display' && ($sbus || $prob_name =~ /^(ffb|afb|cgfourteen)$/)) {
- $prob_name =~ s/[A-Z,]*(.*)/$1/;
- my $ext = ($prob_name eq 'mgx' && prom_getint('fb_size') == 0x400000 && '_4M' ||
- $prob_name eq 'cgsix' && do {
- my ($chiprev, $vmsize) = (prom_getint('chiprev'), prom_getint('vmsize'));
- my $result = '';
- $chiprev >= 1 && $chiprev <= 4 and $result = '_dbl';
- $chiprev >= 5 && $chiprev <= 9 and $result = '_sgl';
- $chiprev == 11 && $vmsize == 2 and $result = '_t1M';
- $chiprev == 11 && $vmsize == 4 and $result = '_tp';
- $chiprev == 11 && !$result and $result = '_t';
- $result;
- } ||
- $prob_name eq 'leo' && c::prom_getstring('model') =~ /501-2503/ && '_t' ||
- $prob_name eq 'tcx' && c::prom_getbool('tcx-8-bit') && '_8b' ||
- $prob_name eq 'afb' && sprintf "_btx%x", prom_getint('board_type') ||
- $prob_name eq 'ffb' && sprintf "_btx%x", prom_getint('board_type'));
-
- $sbus_table_video{$prob_name . $ext} ?
- push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name . $ext}} ] :
- push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name}} ];
- }
-
- #- parse prom tree.
- $prob_name eq 'sbus' || $prob_name eq 'sbi' and $nsbus = 1;
- $prob_name eq 'ebus' and $nebus = 1;
- $nextnode = c::prom_getchild($node) and prom_walk($sbus_probed, $nextnode, $nsbus, $nebus);
- $nextnode = c::prom_getsibling($node) and prom_walk($sbus_probed, $nextnode, $sbus, $ebus);
-}
-
-sub probe {
- eval { modules::load("openprom") } if arch() =~ /sparc/;
- my $root_node = c::prom_open();
- my @l;
-
- prom_walk(\@l, $root_node, 0, 0);
- c::prom_close();
- map { my %l; @l{qw(type description drivers)} = @$_ } @l;
-}
diff --git a/perl-install/scanner.pm b/perl-install/scanner.pm
deleted file mode 100755
index 0e67eb02e..000000000
--- a/perl-install/scanner.pm
+++ /dev/null
@@ -1,227 +0,0 @@
-package scanner;
-# scanner.pm $Id$
-# Yves Duret <yduret at mandrakesoft.com>
-# Copyright (C) 2001 MandrakeSoft
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# pbs/TODO:
-# - no scsi support
-# - devfs use dev_is_devfs()
-# - with 2 scanners same manufacturer -> will overwrite previous conf -> only 1 conf !!
-# - lp: see printerdrake
-# - install: prefix --> done
-
-use standalone;
-use common;
-use detect_devices;
-
-
-my $_sanedir = "$prefix/etc/sane.d";
-my $_scannerDBdir = "$prefix$ENV{SHARE_PATH}/ldetect-lst";
-$scannerDB = readScannerDB("$_scannerDBdir/ScannerDB");
-
-sub confScanner {
- my ($model, $port) = @_;
- $port = detect_devices::dev_is_devfs() ? "$prefix/dev/usb/scanner0" : "$prefix/dev/scanner" if (!$port);
- my $a = $scannerDB->{$model}{server};
- #print "file:[$a]\t[$model]\t[$port]\n| ", (join "\n| ", @{$scannerDB->{$model}{lines}}),"\n";
- output("$_sanedir/$a.conf", (join "\n",@{$scannerDB->{$model}{lines}}));
- substInFile {s/\$DEVICE/$port/} "$_sanedir/$a.conf";
- add2dll($a);
-}
-
-sub add2dll {
- return if member($_[0], chomp_(cat_("$_sanedir/dll.conf")));
- local *F;
- open F, ">>$_sanedir/dll.conf" or die "can't write SANE config in $_sanedir/dll.conf: $!";
- print F $_[0];
- close F;
-}
-
-sub findScannerUsbport {
- my ($i, $elem, @res) = (0, {});
- foreach (grep { $_->{driver} =~ /scanner/ } detect_devices::usb_probe()) {
- #my ($manufacturer, $model) = split '\|', $_->{description};
- #$_->{description} =~ s/Hewlett[-\s_]Packard/HP/;
- push @res, { port => "/dev/usb/scanner$i", val => { #CLASS => 'SCANNER',
- #MODEL => $model,
- #MANUFACTURER => $manufacturer,
- DESCRIPTION => $_->{description},
- #id => $_->{id},
- #vendor => $_->{vendor},
- }};
- ++$i;
- }
- @res;
-}
-
-
-sub findScannerScsi {
-
-}
-
-sub readScannerDB {
- my ($file) = @_;
- my ($card, %cards);
-
- my $F = common::openFileMaybeCompressed($file);
-
- my ($lineno, $cmd, $val) = 0;
- my $fs = {
- LINE => sub { push @{$card->{lines}}, $val },
- NAME => sub {
- $cards{$card->{type}} = $card if ($card and !$card->{flags}{unsupported});
- $card = { type => $val };
- },
- SEE => sub {
- my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
-
- push @{$card->{lines}}, @{$c->{lines} || []};
- add2hash($card->{flags}, $c->{flags});
- add2hash($card, $c);
- },
- ASK => sub { $card->{ask} = $val; },
- SERVER => sub { $card->{server} = $val; },
- DRIVER => sub { $card->{driver} = $val; },
- UNSUPPORTED => sub { $card->{flags}{unsupported} = 1 },
- COMMENT => sub {},
- };
-
- local $_;
- while (<$F>) { $lineno++;
- s/\s+$//;
- /^#/ and next;
- /^$/ and next;
- /^END/ and do { $cards{$card->{type}} = $card if $card; last };
- ($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next;
- my $f = $fs->{$cmd};
- $f ? $f->() : log::l("unknown line $lineno ($_)");
- }
- \%cards;
-}
-
-sub updateScannerDBfromUsbtable {
- substInFile {s/END//} "ScannerDB";
- local *F;
- open F, ">>ScannerDB" or die "can't write ScannerDB config in ScannerDB: $!";
- print F "# generated from usbtable by scannerdrake\n";
- foreach (cat_("$ENV{SHARE_PATH}/ldetect-lst/usbtable")) {
- my ($vendor_id, $product_id, $mod, $name) = chomp_(split /\s/,$_,4);
- next unless ($mod eq "\"scanner\"");
- $name =~ s/\"(.*)\"$/$1/;
- if (member($name, keys %$scanner::scannerDB)) {
- print "#[$name] already in ScannerDB!\n";
- next;
- }
- print F "NAME $name\nDRIVER usb\nCOMMENT usb $vendor_id $product_id\nUNSUPPORTED\n\n";
- }
- print F "END\n";
- close F;
-}
-
-sub updateScannerDBfromSane {
- my ($_sanesrcdir) = @_;
- substInFile {s/END//} "ScannerDB";
-
- local *Y;
- open Y, ">>ScannerDB" or die "can't write ScannerDB config in ScannerDB: $!";
- print Y "# generated from Sane by scannerdrake\n";
- # for compat with our usbtable
- my $sane2DB = {
- "Acer" => "Acer Peripherals Inc.",
- "AGFA" => "AGFA-Gevaert NV",
- "Agfa" => "AGFA-Gevaert NV",
- "Epson" => "Seiko Epson Corp.",
- "Fujitsu Computer Products of America" => "Fujitsu",
- "HP" => sub {$_[0] =~ s/HP\s/Hewlett-Packard|/; $_[0] =~ s/HP4200/Hewlett-Packard|ScanJet 4200C/; $_[0];},
- "Hewlett-Packard" => sub {$_[0] =~ s/HP 3200 C/Hewlett-Packard|ScanJet 3200C/; $_[0];},
- "Kodak" => "Kodak Co.",
- "Mustek" => "Mustek Systems Inc.",
- "NEC" => "NEC Systems",
- "Nikon" => "Nikon Corp.",
- "Plustek" => "Plustek, Inc.",
- "Primax" => "Primax Electronics",
- "Siemens" => "Siemens Information and Communication Products",
- "Trust" => "Trust Technologies",
- "UMAX" => "Umax",
- "Vobis/Highscreen" => "Vobis",
- };
-
- opendir YREP, $_sanesrcdir or die "can't open $_sanesrcdir: $!";
- @files = grep /.*desc$/, readdir YREP;
- closedir YREP;
- foreach $i (@files) {
- my $F = common::openFileMaybeCompressed("$_sanesrcdir/$i");
- print Y "\n# from $i";
- my ($lineno, $cmd, $val) = 0;
- my ($name, $intf, $comment,$mfg);
- my $fs = {
- backend => sub {$backend = $val;},
- mfg => sub {$mfg = $val; $name=undef;},#bug when a new mfg comes. should called $fs->{$name}(); but ??
- model => sub {
- unless ($name) {$name = $val; next;}
- $name = (member($mfg, keys %$sane2DB))
- ? (ref $sane2DB->{$mfg}) ? $sane2DB->{$mfg}($name) : "$sane2DB->{$mfg}|$name" : "$mfg|$name";
- if (member($name, keys %$scanner::scannerDB)) {
- print "#[$name] already in ScannerDB!\n";
- } else {
- print Y "\nNAME $name\nSERVER $backend\nDRIVER $intf\n";
- print Y "COMMENT $comment\n" if ($comment);
- $comment = undef;
- }
- $name = $val;
- },
- interface => sub {$intf = $val;},
- comment => sub {$comment = $val;},
- };
- local $_;
- while (<$F>) { $lineno++;
- s/\s+$//;
- /^\;/ and next;
- ($cmd, $val) = /:(\S+)\s*\"([^\;]*)\"/ or next; #log::l("bad line $lineno ($_)"), next;
- my $f = $fs->{$cmd};
- $f ? $f->() : log::l("unknown line $lineno ($_)");
- }
- $fs->{model}(); # the last one
- }
- print Y "\nEND\n";
- close Y;
-}
-
-#-######################################################################################
-#- Wonderful perl :(
-#-######################################################################################
-1; #
-
-#-----------------------------------------------
-# $Log$
-# Revision 1.7 2002/07/08 08:34:51 tvignaud
-# this doesn't need either "#!/usr/bin/perl" nor "use lib qw(/usr/lib/libDrakX);"
-#
-# Revision 1.6 2002/03/10 15:26:00 yduret
-# added ASK support for more interactiveness during configuration
-#
-# Revision 1.5 2002/02/18 17:34:31 yduret
-# update
-#
-# Revision 1.4 2002/02/18 16:16:13 yduret
-# scsi parport preliminary support
-# no more show unsupported scanner
-# common output for ScannerDB update from sane *.desc files and from usbtable
-#
-# Revision 1.3 2001/11/12 15:18:02 yduret
-# update, sync with cvs
-#
diff --git a/perl-install/security/msec.pm b/perl-install/security/msec.pm
deleted file mode 100644
index 66800ef11..000000000
--- a/perl-install/security/msec.pm
+++ /dev/null
@@ -1,238 +0,0 @@
-package security::msec;
-
-use common;
-use log;
-
-sub get_user_list {
- my @user_list = ();
-
- open(PASSWD, "/etc/passwd");
- while(<PASSWD>) {
- my ($login_name, undef, $uid) = split(/:/,$_);
- if($uid >= 500) { push(@user_list, $login_name); }
- }
- @user_list;
-}
-
-sub add_config {
- my ($prefix, $config_option, @values) = @_;
- my $tmp_file = "$prefix/etc/security/msec/level.local.tmp";
- my $result = "";
-
- $result = $config_option.'(';
- foreach $value (@values) {
- $result .= $value.',';
- }
- chop $result;
- $result .= ')';
-
- open(TMP_CONFIG, '>>'.$tmp_file);
- print TMP_CONFIG "$result\n";
- close TMP_CONFIG;
-}
-
-sub commit_changes {
- my ($prefix) = $_;
- my $tmp_file = "$prefix/etc/security/msec/level.local.tmp";
- my $config_file = "$prefix/etc/security/msec/level.local";
- my %config_data;
- my $config_option = "";
-
- open (TMP_CONFIG, $tmp_file);
-
- if (!(-x $config_file)) {
- open(CONFIG_FILE, '>'.$config_file);
- print CONFIG_FILE "from mseclib import *\n\n";
- while(<TMP_CONFIG>) { print CONFIG_FILE $_; }
- }
- else {
- open(CONFIG_FILE, $config_file);
- while(<CONFIG_FILE>) {
- if($_ =~ /\(/) {
- ($config_option, undef) = split(/\(/, $_);
- (undef, $config_data{$config_option}) = split(/\(/, $_);
- }
- }
- close CONFIG_FILE;
-
- while(<TMP_CONFIG>) {
- ($config_option, undef) = split(/\(/, $_);
- (undef, $config_data{$config_option}) = split(/\(/, $_);
- }
-
- open(CONFIG_FILE, '>'.$config_file);
- print CONFIG_FILE "from mseclib import *\n\n";
- foreach $config_option (keys %config_data) {
- print CONFIG_FILE $config_option.'('.$config_data{$config_option}.'\n';
- }
- }
-
- close CONFIG_FILE;
- close TMP_CONFIG;
-
- standalone::rm_rf($tmp_file);
-}
-
-sub get_config {
- my ($prefix, $security) = @_;
-
- my (%net_options_defaults) = (
- accept_bogus_error_responses => [ 0, 0, 0, 0, 1, 1 ],
- accept_icmp_echo => [ 1, 1, 1, 1, 0, 0 ],
- enable_ip_spoofing_protection => [ 0, 0, 0, 1, 1, 1 ],
- enable_log_strange_packets => [ 0, 0, 0, 0, 1, 1 ] );
-
- my (%user_options_defaults) = (
- allow_autologin => [ 1, 1, 1, 0, 0, 0 ],
- allow_issues => [ "ALL", "ALL", "ALL", "LOCAL", "LOCAL", "NONE" ],
- allow_reboot => [ 1, 1, 1, 1, 0, 0 ],
- allow_root_login => [ 1, 1, 1, 1, 0, 0 ],
- allow_user_list => [ 1, 1, 1, 1, 0, 0 ],
- enable_at_crontab => [ 1, 1, 1, 1, 0, 0 ],
- enable_pam_wheel_for_su => [ 0, 0, 0, 0, 0, 0 ],
- enable_password => [ 0, 1, 1, 1, 1, 1 ],
- enable_sulogin => [ 0, 0, 0, 0, 1, 1 ],
- password_aging => [ "99999,-1", "99999,-1", "99999,-1", "99999,-1", "60,-1", "30,-1" ],
- password_length => [ "0,0,0", "0,0,0", "0,0,0", "0,0,0", "0,0,0", "0,0,0" ],
- set_root_umask => [ "002", "002", "022", "022", "022", "077" ],
- set_user_umask => [ "002", "002", "022", "022", "077", "077" ],
- set_shell_history_size => [ "-1", "-1", "-1", "-1", "10", "10" ],
- set_shell_timeout => [ "0", "0", "0", "0", "3600", "900" ] );
-
- my (%server_options_defaults) = (
- allow_x_connections => [ "ALL", "LOCAL", "LOCAL", "LOCAL", "LOCAL", "NONE" ],
- authorize_services => [ "ALL", "ALL", "ALL", "ALL", "LOCAL", "NONE" ],
- enable_libsafe => [ 0, 0, 0, 0, 0, 0 ] );
-
- my (%net_options) = (
- accept_bogus_error_responses => $net_options_defaults{accept_bogus_error_responses}[$security],
- accept_icmp_echo => $net_options_defaults{accept_icmp_echo}[$security],
- enable_ip_spoofing_protection => $net_options_defaults{enable_ip_spoofing_protection}[$security],
- enable_log_strange_packets => $net_options_defaults{enable_log_strange_packets}[$security]
- );
-
- my (%net_options_matrix) = (
- accept_bogus_error_responses => { label => _("Accept/Refuse bogus IPV4 error messages"),
- val => \$net_options{accept_bogus_error_responses},
- type => "bool" },
- accept_icmp_echo => { label => _("Accept/Refuse ICMP echo"),
- val => \$net_options{accept_icmp_echo},
- type => "bool" },
- enable_ip_spoofing_protection => { label => _("Enable/Disable IP spoofing protection. If alert is true, also reports to syslog"),
- val => \$net_options{enable_ip_spoofing_protection},
- type=> "bool" },
- enable_log_strange_packets => { label => _("Enable/Disable the logging of IPv4 strange packets"),
- val => \$net_options{enable_log_strange_packets},
- type => "bool" }
- );
-
- my (%user_options) = (
- allow_autologin => $user_options_defaults{allow_autologin}[$security],
- allow_issues => $user_options_defaults{allow_issues}[$security],
- allow_reboot => $user_options_defaults{allow_reboot}[$security],
- allow_root_login => $user_options_defaults{allow_root_login}[$security],
- allow_user_list => $user_options_defaults{allow_user_list}[$security],
- enable_at_crontab => $user_options_defaults{enable_at_crontab}[$security],
- enable_pam_wheel_for_su => $user_options_defaults{enable_pam_wheel_for_su}[$security],
- enable_password => $user_options_defaults{enable_password}[$security],
- enable_sulogin => $user_options_defaults{enable_sulogin}[$security],
- password_aging => $user_options_defaults{password_aging}[$security],
- password_length => $user_options_defaults{password_length}[$security],
- set_root_umask => $user_options_defaults{set_root_umask}[$security],
- set_user_umask => $user_options_defaults{set_user_umask}[$security],
- set_shell_history_size => $user_options_defaults{set_shell_history_size}[$security],
- set_shell_timeout => $user_options_defaults{set_shell_timeout}[$security]
- );
-
- my (%user_options_matrix) = (
- allow_autologin => { label => _("Allow/Forbid autologin"),
- val => \$user_options{allow_autologin},
- type => "bool" },
- allow_issues => { label => _("Allow/Forbid pre-login message : If ALL, allow remote and local pre-login message (/etc/issue[.net]).\n If LOCAL, allow local pre-login message (/etc/issue). If NONE, disable pre-login message."),
- val => \$user_options{allow_issues},
- list => ["ALL", "LOCAL", "NONE"] },
- allow_reboot => { label => _("Allow/Forbid reboot by the console user"),
- val => \$user_options{allow_reboot},
- type => "bool" },
- allow_root_login => { label => _("Allow/Forbid direct root login"),
- val => \$user_options{allow_root_login},
- type => "bool" },
- allow_user_list => { label => _("Allow/Forbid the list of users on the system in the display managers (kdm and gdm)"),
- val => \$user_options{allow_user_list},
- type => "bool" },
- enable_at_crontab => { label => _("Enable/Disable crontab and at for users. Put allowed users in /etc/cron.allow\n and /etc/at.allow (see at(1) and crontab(1))"),
- val => \$user_options{enable_at_crontab},
- type => "bool" },
- enable_pam_wheel_for_su => { label => _("Enable su only for members of the wheel group or allow su from any user"),
- val => \$user_options{enable_pam_wheel_for_su},
- type => "bool" },
- enable_password => { label => _("Use password to authenticate users"),
- val => \$user_options{enable_password},
- type => "bool" },
- enable_sulogin => { label => _("Enable/Disable sulogin in single user level (see sulogin(8))"),
- val => \$user_options{enable_sulogin},
- type => "bool" },
- password_aging => { label => _("Set password aging to max days, Set delay before inactive\n (99999 to disable password aging, -1 to disable de-activation"),
- val => \$user_options{password_aging} },
- password_length => { label => _("Set the password minimum length, the minimum number of digits and the minimum number of capitalized letters"),
- val => \$user_options{password_length} },
- set_root_umask => { label => _("Set the root umask"),
- val => \$user_options{set_root_umask} },
- set_user_umask => { label => _("Set the user umask"),
- val => \$user_options{set_user_umask} },
- set_shell_history_size => { label => _("Set shell commands history size (-1 for unlimited)"),
- val => \$user_options{set_shell_history_size} },
- set_shell_timeout => { label => _("Set the shell timeout in seconds (0 for unlimited)"),
- val => \$user_options{set_shell_timeout} }
- );
-
- my (%server_options) = (
- allow_x_connections => $server_options_defaults{allow_x_connections}[$security],
- authorize_services => $server_options_defaults{authorize_services}[$security],
- enable_libsafe => $server_options_defaults{enable_libsafe}[$security]
- );
-
- my (%server_options_matrix) = (
- allow_x_connections => { label => ("Allow/Forbid X connections : If ALL, all connections allowed. If LOCAL, local connections allowed.\n If NONE, only console connections allowed"),
- val => \$server_options{allow_x_connections},
- list => [ "ALL", "LOCAL", "NONE" ] },
- authorize_services => { label => _("Allow/Forbid services : If ALL, authorize all services. If LOCAL, authorize only local services.\n If NONE, disable all services. (see hosts.deny(5)). To authorize a service, see hosts.allow(5)."),
- val => \$server_options{authorize_services},
- list => [ "ALL", "LOCAL", "NONE" ] },
- enable_libsafe => { label => _("Enable/Disable libsafe if it's installed on the system."),
- val => \$server_options{enable_libsafe},
- type => "bool" },
- );
-
- my $config_file = "$prefix/etc/security/msec/level.local";
- my $values = "";
- my $config_option = "";
-
- open CONFIGFILE, $config_file;
- while(<CONFIGFILE>) {
- if($_ =~ /\(/) {
- ($config_option, undef) = split(/\(/, $_);
- (undef, $values) = split(/\(/, $_);
- chop $values;
-
- if ($config_option ne "set_security_conf") {
- if ($net_options_matrix{$config_option}{description} eq "") {
- (undef, $net_options_matrix{$config_option}{value}) = $values;
- } elsif ($user_options_matrix{$config_option}{description} eq "") {
- (undef, $user_options_matrix{$config_option}{value}) = $values;
- } elsif ($server_options_matrix{$config_option}{description} eq "") {
- (undef, $server_options_matrix{$config_option}{value}) = $values;
- }
- }
- else {
- # TODO : Add code to handle set_security_conf
- }
- }
- }
-
- close CONFIGFILE;
-
- return (\%net_options_matrix, \%user_options_matrix, \%server_options_matrix);
-}
-
-1;
diff --git a/perl-install/services.pm b/perl-install/services.pm
deleted file mode 100644
index 0ddaaf79a..000000000
--- a/perl-install/services.pm
+++ /dev/null
@@ -1,288 +0,0 @@
-package services; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use run_program;
-
-sub description {
- my %services = (
-alsa => __("Launch the ALSA (Advanced Linux Sound Architecture) sound system"),
-anacron => __("Anacron a periodic command scheduler."),
-apmd => __("apmd is used for monitoring batery status and logging it via syslog.
-It can also be used for shutting down the machine when the battery is low."),
-atd => __("Runs commands scheduled by the at command at the time specified when
-at was run, and runs batch commands when the load average is low enough."),
-crond => __("cron is a standard UNIX program that runs user-specified programs
-at periodic scheduled times. vixie cron adds a number of features to the basic
-UNIX cron, including better security and more powerful configuration options."),
-gpm => __("GPM adds mouse support to text-based Linux applications such the
-Midnight Commander. It also allows mouse-based console cut-and-paste operations,
-and includes support for pop-up menus on the console."),
-harddrake => __("HardDrake runs a hardware probe, and optionally configures
-new/changed hardware."),
-httpd => __("Apache is a World Wide Web server. It is used to serve HTML files and CGI."),
-inet => __("The internet superserver daemon (commonly called inetd) starts a
-variety of other internet services as needed. It is responsible for starting
-many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
-all of the services it is responsible for."),
-ipchains => __("Launch packet filtering for Linux kernel 2.2 series, to set
-up a firewall to protect your machine from network attacks."),
-keytable => __("This package loads the selected keyboard map as set in
-/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.
-You should leave this enabled for most machines."),
-kheader => __("Automatic regeneration of kernel header in /boot for
-/usr/include/linux/{autoconf,version}.h"),
-kudzu => __("Automatic detection and configuration of hardware at boot."),
-linuxconf => __("Linuxconf will sometimes arrange to perform various tasks
-at boot-time to maintain the system configuration."),
-lpd => __("lpd is the print daemon required for lpr to work properly. It is
-basically a server that arbitrates print jobs to printer(s)."),
-lvs => __("Linux Virtual Server, used to build a high-performance and highly
-available server."),
-named => __("named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."),
-netfs => __("Mounts and unmounts all Network File System (NFS), SMB (Lan
-Manager/Windows), and NCP (NetWare) mount points."),
-network => __("Activates/Deactivates all network interfaces configured to start
-at boot time."),
-nfs => __("NFS is a popular protocol for file sharing across TCP/IP networks.
-This service provides NFS server functionality, which is configured via the
-/etc/exports file."),
-nfslock => __("NFS is a popular protocol for file sharing across TCP/IP
-networks. This service provides NFS file locking functionality."),
-numlock => __("Automatically switch on numlock key locker under console
-and XFree at boot."),
-oki4daemon => __("Support the OKI 4w and compatible winprinters."),
-pcmcia => __("PCMCIA support is usually to support things like ethernet and
-modems in laptops. It won't get started unless configured so it is safe to have
-it installed on machines that don't need it."),
-portmap => __("The portmapper manages RPC connections, which are used by
-protocols such as NFS and NIS. The portmap server must be running on machines
-which act as servers for protocols which make use of the RPC mechanism."),
-postfix => __("Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."),
-random => __("Saves and restores system entropy pool for higher quality random
-number generation."),
-rawdevices => __("Assign raw devices to block devices (such as hard drive
-partitions), for the use of applications such as Oracle"),
-routed => __("The routed daemon allows for automatic IP router table updated via
-the RIP protocol. While RIP is widely used on small networks, more complex
-routing protocols are needed for complex networks."),
-rstatd => __("The rstat protocol allows users on a network to retrieve
-performance metrics for any machine on that network."),
-rusersd => __("The rusers protocol allows users on a network to identify who is
-logged in on other responding machines."),
-rwhod => __("The rwho protocol lets remote users get a list of all of the users
-logged into a machine running the rwho daemon (similiar to finger)."),
-sound => __("Launch the sound system on your machine"),
-syslog => __("Syslog is the facility by which many daemons use to log messages
-to various system log files. It is a good idea to always run syslog."),
-usb => __("Load the drivers for your usb devices."),
-xfs => __("Starts the X Font Server (this is mandatory for XFree to run)."),
- );
- my ($name, $prefix) = @_;
- my $s = $services{$name};
- if ($s) {
- $s = translate($s);
- } else {
- $s = -e "$prefix/etc/rc.d/init.d/$name" && cat_("$prefix/etc/rc.d/init.d/$name");
- $s ||= -e "$prefix/etc/init.d/$name" && cat_("$prefix/etc/init.d/$name");
- $s ||= -e "$prefix/etc/xinetd.d/$name" && cat_("$prefix/etc/xinetd.d/$name");
- $s =~ s/\\\s*\n#\s*//mg;
- if ($s =~ /^# description:\s+\S/sm) {
- ($s) = $s =~ /^# description:\s+(.*?)^(?:[^#]|# {0,2}\S)/sm;
- } else {
- ($s) = $s =~ /^#\s*(.*?)^[^#]/sm;
- }
- $s =~ s/#\s*//mg;
- }
- $s =~ s/\n/ /gm; $s =~ s/\s+$//;
- $s;
-}
-
-sub ask_install_simple {
- my ($in, $prefix) = @_;
- my ($l, $on_services) = services($prefix);
- $in->ask_many_from_list("drakxservices",
- _("Choose which services should be automatically started at boot time"),
- {
- list => $l,
- help => sub { description($_[0], $prefix) },
- values => $on_services,
- sort => 1,
- });
-}
-
-sub ask_install {
- my ($in, $prefix) = @_;
- my %root_services = (
- _("Printing") => [ qw(cups cupslpd lpr lpd oki4daemon hpoj cups-lpd ) ],
- _("Internet") => [ qw(httpd boa tux roxen ftp pftp tftp proftpd wu-ftpd pure-ftpdipsec proftpd-xinetd
- ipchains iptables ipvsadm isdn4linux ibod jabber jabber-icq adsl squid
- portsentry prelude nessusd junkbuster radvd cddbp ippl iptoip jail.init ) ],
- _("File sharing") => [ qw(nfs nfslock smb nettalk netfs mcserv autofs amd
- venus.init auth2.init codasrv.init update.init swat ) ],
- _("System") => [ qw(usb usbd pcmcia irda xinetd inetd kudzu harddrake apmd sound network xfs
- alsa functions halt kheader killall mandrake_everytime mandrake_firstime
- random rawdevices single keytable syslog crond medusa-init portmap acon
- anacron atd gpm psacct wine acpid numlock jserver sensors mosix bpowerd bpowerfail
- fcron powertweak.init ups syslog-ng cvs apcupsd) ],
- _("Remote Administration") => [ qw(sshd telnetd telnet rsh rlogin rexec webmin cfd heartbeat ldirectord
- iplog mon vncserver netsaint olympusd drakxtools_http ) ],
-# _("Network Client") => [ qw(ypbind nscd arpwatch fetchmail dnrd_rc diald rsync ) ],
-# _("Network Server") => [ qw(named bootparamd ntpd xntpd chronyd postfix sendmail
-# imap imaps ipop2 ipop3 pop3s routed yppasswdd ypserv ldap dhcpd dhcrelay
-# hylafax innd identd rstatd rusersd rwalld rwhod gated
-# kadmin kprop krb524 krb5kdc krb5server hldsld bayonne sockd dhsd gnu-pop3d
-# gdips pptpd.conf vrrpd crossfire bnetd pvmd ircd sympa finger ntalk talk) ],
- _("Database Server") => [ qw(mysql postgresql) ],
- );
- my %services_root;
- foreach my $root (keys %root_services) {
- $services_root{$_} = $root foreach @{$root_services{$root}};
- }
- my ($l, $on_services) = services($prefix);
- my %services;
- $services{$_} = 0 foreach @{$l || []};
- $services{$_} = 1 foreach @{$on_services || []};
-
- $in->ask_browse_tree_info('drakxservices', _("Choose which services should be automatically started at boot time"),
- {
- node_state => sub { $services{$_[0]} ? 'selected' : 'unselected' },
- build_tree => sub {
- my ($add_node, $flat) = @_;
- $add_node->($_, !$flat && ($services_root{$_} || _("Other")))
- foreach sort keys %services;
- },
- grep_unselected => sub { grep { !$services{$_} } @_ },
- toggle_nodes => sub {
- my ($set_state, @nodes) = @_;
- my $new_state = !$services{$nodes[0]};
- foreach (@nodes) {
- $set_state->($_, $new_state ? 'selected' : 'unselected');
- $services{$_} = $new_state;
- }
- },
- get_status => sub {
- _("Services: %d activated for %d registered",
- scalar(grep { $_ } values %services),
- scalar(values %services));
- },
- get_info => sub { formatLines(description($_[0], $prefix)) },
- }) or return ($l, $on_services); #- no change on cancel.
- ($l, [ grep { $services{$_} } @$l ]);
-}
-
-sub ask_standalone_gtk {
- my ($in, $prefix) = @_;
- my ($l, $on_services) = services($prefix);
-
- require my_gtk;
- my_gtk->import(qw(:helpers :wrappers));
-
- my $W = my_gtk->new(_("Services"));
- my ($x, $y, $w_popup);
- my $nopop = sub { $w_popup and $w_popup->destroy };
- my $display = sub { $nopop->(); $_[0] and gtkmove(gtkshow(gtkadd($w_popup=new Gtk::Window (-popup),
- gtksignal_connect(gtkadd(new Gtk::EventBox(),
- gtkadd(gtkset_shadow_type(new Gtk::Frame, 'etched_out'),
- gtkset_justify(new Gtk::Label($_[0]), 0))),
- button_press_event => sub { $nopop->() }
- ))), $x, $y) };
- my $update_service = sub {
- my $started = -e "/var/lock/subsys/$_[0]";
- my $action = $started ? "stop" : "start";
- $_[1]->set($started ? _("running") : _("stopped"));
- $started, $action;
- };
- my $strip = sub {
- my $infos_old = $_[0];
- my $infos;
- while ($infos_old =~ s/(.{40})//) {
- $1 =~ /(.*) ([^ ]*)/;
- $infos .= "$1\n$2";
- }
- $infos .= $infos_old;
- };
- my $b = new Gtk::EventBox();
- $b->set_events(["pointer_motion_mask"]);
- gtkadd($W->{window}, gtkadd($b, gtkpack_($W->create_box_with_title(_("Services and deamons")),
- 1, gtkset_usize(createScrolledWindow(create_packtable({ col_spacings => 10, row_spacings => 3 },
- map {
- my $service = $_;
- my $infos = $strip->(description($_, $prefix));
- $infos ||= _("No additional information\nabout this service, sorry.");
- my $l = new Gtk::Label();
- my ($started, $action) = $update_service->($service, gtkset_justify($l, 0));
- [ gtkpack__(new Gtk::HBox(0,0), $_),
- gtkpack__(new Gtk::HBox(0,0), $l),
- gtkpack__(new Gtk::HBox(0,0), gtksignal_connect(new Gtk::Button(_("Info")), clicked => sub { $display->($infos) })),
- gtkpack__(new Gtk::HBox(0,0), gtkset_active(gtksignal_connect(
- new Gtk::CheckButton(_("On boot")),
- clicked => sub { if ($_[0]->active) {
- "@$on_services" =~ /$service/ or push(@$on_services,$service)
- } else {
- @$on_services = grep(!/$service/, @$on_services)
- }}), "@$on_services" =~ /$service/ )),
- map { my $a = $_;
- gtkpack__(new Gtk::HBox(0,0), gtksignal_connect(new Gtk::Button(_($a)),
- clicked => sub { my $c = "service $service " . (lc($a) eq "start" ? "restart" : lc($a)) . " 2>&1"; local $_=`$c`; s/\033\[[^mG]*[mG]//g;
- ($started, $action) = $update_service->($service, $l);
- $display->($_);
- }
- )) } (__("Start"), __("Stop"))
- ]
- }
- @$l)), 500, 400),
- 0, gtkpack(gtkset_border_width(new Gtk::HBox(0,0),5), $W->create_okcancel)
- ))
- );
- $b->signal_connect( motion_notify_event => sub { my ($w, $e) = @_;
- my ($ox, $oy) = $w->window->get_deskrelative_origin;
- $x = $e->{'x'}+$ox; $y = $e->{'y'}+$oy; });
- $b->signal_connect( button_press_event => sub { $nopop->()});
- $::isEmbedded and Gtk->main_iteration while Gtk->events_pending;
- $::isEmbedded and kill (12, $::CCPID);
- $W->main or return;
- ($l, $on_services);
-}
-
-sub ask {
- my ($in, $prefix) = @_;
- !$::isInstall && $in->isa('interactive_gtk') ? &ask_standalone_gtk : &ask_install;
-}
-
-sub doit {
- my ($in, $on_services, $prefix) = @_;
- my ($l, $was_on_services) = services($prefix);
-
- foreach (@$l) {
- my $before = member($_, @$was_on_services);
- my $after = member($_, @$on_services);
- if ($before != $after) {
- my $script = "/etc/rc.d/init.d/$_";
- run_program::rooted($prefix, "chkconfig", $after ? "--add" : "--del", $_);
- if ($after && cat_("$prefix$script") =~ /^#\s+chkconfig:\s+-/m) {
- run_program::rooted($prefix, "chkconfig", "--level", "35", $_, "on");
- }
- if (!$after && $::isStandalone) {
- run_program::rooted($prefix, $script, "stop");
- }
- }
- }
-}
-
-#- returns:
-#--- the listref of installed services
-#--- the listref of "on" services
-sub services {
- my ($prefix) = @_;
- my $cmd = $prefix && !$::testing ? "chroot $prefix" : "";
- my @l = map { [ /([^\s:]+)/, /\bon\b/ ] } grep { !/:$/ } sort `LANGUAGE=C $cmd /sbin/chkconfig --list`;
- [ map { $_->[0] } @l ], [ map { $_->[0] } grep { $_->[1] } @l ];
-}
-
-1;
diff --git a/perl-install/share/Makefile b/perl-install/share/Makefile
deleted file mode 100644
index 00e5afcc3..000000000
--- a/perl-install/share/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-all: locales.tar.bz2
-
-# /usr/lib/libc.a to depend on the current glibc
-locales.tar.bz2: locales-skeleton.tar.bz2 gen_locales.sh /usr/lib/libc.a
- ./gen_locales.sh
diff --git a/perl-install/share/advertising/Makefile b/perl-install/share/advertising/Makefile
deleted file mode 100644
index 30005e186..000000000
--- a/perl-install/share/advertising/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-include ../../Makefile.config
-
-install:
- rm -rf $(ROOTDEST)/Mandrake/share/advertising
- install -d $(ROOTDEST)/Mandrake/share/advertising
- install -m755 *.pl $(ROOTDEST)/Mandrake/share/advertising
- install -m644 *.png $(ROOTDEST)/Mandrake/share/advertising
- install -m644 list $(ROOTDEST)/Mandrake/share/advertising
diff --git a/perl-install/share/advertising/list b/perl-install/share/advertising/list
deleted file mode 100644
index fb5689909..000000000
--- a/perl-install/share/advertising/list
+++ /dev/null
@@ -1,14 +0,0 @@
-00-thanks.png
-01-gnu.png
-02-internet.png
-03-graphic.png
-04-develop.png
-05-contcenter.png
-06-user.png
-07-server.png
-08-games.png
-09-MDKcampus.png
-10-MDKexpert.png
-11-consul.png
-12-MDKstore.png
-13-Nvert.png
diff --git a/perl-install/share/aliases b/perl-install/share/aliases
deleted file mode 100644
index d3807605a..000000000
--- a/perl-install/share/aliases
+++ /dev/null
@@ -1,7 +0,0 @@
-raidstop raidstart
-gunzip gzip
-install2 perl-install/install2
-commands perl-install/commands
-runinstall2 install2
-fsck.ext2 e2fsck
-rmmod insmod_
diff --git a/perl-install/share/compssList b/perl-install/share/compssList
deleted file mode 100644
index 36b0f4a44..000000000
--- a/perl-install/share/compssList
+++ /dev/null
@@ -1,1665 +0,0 @@
- normal server developer
-
-AVLTree-devel 0 0 0
-AfterStep 22 0 53
-AfterStep-APPS 22 0 35
-Apache-ASP -99 0 -99
-ApacheJServ -99 0 -99
-Apple-StyleWriter-printer-driver__lpstyl 0 0 0
-Aurora 81 -1 -1
-BasiliskII 35 0 10
-BasiliskII-sheepnet 33 0 8
-BitchX 43 0 15
-C++2LaTeX 0 0 30
-Canon-CaPSL-printer-driver__cjet 0 0 0
-ClanLib 32 0 32
-ClanLib-devel 0 0 25
-ClanLib-docs 0 0 25
-ClanLib-gl 0 0 0
-ClanLib-magick 0 0 0
-ClanLib-mikmod 0 0 0
-ClanLib-png 0 0 0
-Device3Dfx -1 -1 -1
-DrakConf 84 84 84
-drakprofile 50 0 50
-draksync 50 0 50
-DrakeLogo 20 0 0
-ElectricFence 10 0 66
-Epplets 57 0 53
-Eterm 57 0 53
-Eterm-devel 0 0 0
-FaxMail 30 0 0
-FileRunner 45 0 25
-FreeWnn -20 -20 -20
-FreeWnn-devel -70 -60 -40
-GConf 0 0 0
-GConf-devel 0 0 40
-GXedit 40 0 55
-Glide_V2 -1 -1 -1
-Glide_V2-devel -1 -1 -1
-Glide_V3 -1 -1 -1
-Glide_V3-DRI -1 -1 -1
-Glide_V3-DRI-devel -1 -1 -1
-Glide_V3-devel -1 -1 -1
-Glide_V5 -1 -1 -1
-Glide_V5-devel -1 -1 -1
-HTML-Embperl 0 40 40
-Hermes 32 0 42
-Hermes-devel 0 0 35
-ImageMagick 56 5 60
-ImageMagick-devel 10 0 60
-ImageMagick-lib 0 0 0
-MAKEDEV 91 91 91
-MandrakeUpdate 82 0 80
-Mesa 30 0 70
-Mesa-common 30 0 70
-Mesa-common-devel 0 0 70
-Mesa-demos 10 0 15
-MySQL 2 55 15
-MySQL-bench 2 50 10
-MySQL-client 2 52 11
-MySQL-devel 0 0 15
-MySQL-shared 2 50 10
-ORBit 0 0 55
-ORBit-devel 10 0 55
-SDL 50 0 25
-SDL-devel 0 0 25
-SDL_image 0 0 25
-SDL_image-devel 0 0 25
-SDL_mixer 0 0 25
-SDL_mixer-devel 0 0 25
-SDL_net 0 0 25
-SDL_net-devel 0 0 25
-SDL_ttf 0 0 25
-SDL_ttf-devel 0 0 25
-SVGATextMode 0 0 0
-SmallEiffel 0 0 30
-SysVinit 15 52 45
-TiMidity++ 51 0 54
-WMRack 40 0 32
-WindowMaker 40 0 57
-WindowMaker-devel 0 0 30
-WsLib-devel 0 0 0
-X11R6-contrib 55 0 47
-XFree86 91 0 81
-XFree86-100dpi-fonts 56 0 30
-XFree86-3DLabs -30 -30 -30
-XFree86-75dpi-fonts 91 0 81
-XFree86-8514 -30 -30 -30
-XFree86-AGX -30 -30 -30
-XFree86-FBDev -30 -30 -30
-XFree86-I128 -30 -30 -30
-XFree86-ISO8859-2 -20 -30 -20
-XFree86-ISO8859-2-100dpi-fonts -20 -30 -20
-XFree86-ISO8859-2-75dpi-fonts -20 -30 -20
-XFree86-ISO8859-2-Type1-fonts -20 -30 -20
-XFree86-ISO8859-9 -20 -30 -20
-XFree86-ISO8859-9-100dpi-fonts -20 -30 -20
-XFree86-ISO8859-9-75dpi-fonts -20 -30 -20
-XFree86-Mach32 -30 -30 -30
-XFree86-Mach64 -30 -30 -30
-XFree86-Mach8 -30 -30 -30
-XFree86-Mono -30 -30 -30
-XFree86-P9000 -30 -30 -30
-XFree86-S3 -30 -30 -30
-XFree86-S3V -30 -30 -30
-XFree86-SVGA -30 -30 -30
-XFree86-VGA16 -30 -30 -30
-XFree86-W32 -30 -30 -30
-XFree86-Xnest 0 0 55
-XFree86-Xvfb 0 0 15
-XFree86-cyrillic-fonts -20 -30 -20
-XFree86-devel 12 0 55
-XFree86-doc -30 -30 -30
-XFree86-glide-module -2 -2 -2
-XFree86-libs 10 0 0
-XFree86-server -30 -30 -30
-XFree86-server-common -30 -30 -30
-XFree86-static-libs 0 0 20
-XFree86-xfs 0 0 0
-XaoS 40 0 25
-XaoS-aalib 0 0 0
-XaoS-svgalib 0 0 0
-Xaw3d 20 0 70
-Xaw3d-devel 10 0 60
-Zope 0 15 30
-Zope-components 0 15 30
-Zope-core 0 15 30
-Zope-pcgi 0 15 30
-Zope-services 0 15 30
-Zope-zpublisher 0 15 30
-Zope-zserver 0 15 30
-Zope-ztemplates 0 15 30
-aalib 25 0 15
-aalib-devel 0 0 25
-abisuite 59 0 45
-acon -10 -10 -10
-acpid 0 0 0
-adjtimex 22 35 87
-adns 30 30 30
-adns-devel 0 0 30
-aktion 66 0 15
-alsa 0 0 0
-alsa-lib 0 0 0
-alsa-lib-devel 0 0 20
-alsa-source 0 0 0
-alsa-utils 0 0 0
-alsaplayer 0 0 0
-am-utils 0 25 19
-ami -20 -20 -20
-ami-gnome -20 -20 -20
-anacron 85 70 85
-anonftp 0 86 13
-apache -99 80 -99
-apache-common -99 0 -99
-apache-devel -99 0 -99
-apache-manual -99 40 -99
-apache-mod_perl -99 85 -99
-apache-mod_perl-devel -99 0 -99
-apache-suexec -99 75 -99
-apcupsd -1 -1 -1
-apmd -1 -1 -1
-apmd-devel -1 -1 -1
-app-defaults-be -30 -30 -30
-app-defaults-cs -30 -30 -30
-app-defaults-ga -30 -30 -30
-app-defaults-ru -30 -30 -30
-app-defaults-th -30 -30 -30
-app-defaults-uk -30 -30 -30
-arpwatch 0 50 0
-ash 10 10 10
-aspell 49 15 22
-aspell-ca -30 -30 -30
-aspell-cs -30 -30 -30
-aspell-da -30 -30 -30
-aspell-de -30 -30 -30
-aspell-de_CH -30 -30 -30
-aspell-devel 0 0 10
-aspell-en -30 -30 -30
-aspell-en_CA -30 -30 -30
-aspell-en_GB -30 -30 -30
-aspell-eo -30 -30 -30
-aspell-es -30 -30 -30
-aspell-fr -30 -30 -30
-aspell-it -30 -30 -30
-aspell-nl -30 -30 -30
-aspell-no -30 -30 -30
-aspell-pl -30 -30 -30
-aspell-sv -30 -30 -30
-at 42 96 94
-aterm 17 0 13
-audiofile 25 0 26
-audiofile-devel 10 0 26
-aumix 79 0 79
-auth_ldap 5 75 20
-autoconf 15 0 84
-autofs 48 45 50
-autoirpm -60 -60 -60
-autologin 82 0 82
-automake 15 0 84
-awesfx 20 0 13
-basesystem 0 0 0
-bash 0 0 0
-bash-doc 35 50 71
-bash1 15 5 13
-bc 40 25 25
-bdflush 0 0 0
-bind 0 75 0
-bind-devel 0 0 0
-bind-utils 25 35 70
-binutils 47 0 87
-bison 10 0 80
-blackbox 30 0 45
-blt 10 0 75
-bluefish 60 0 60
-boa -99 -99 -99
-bonnie 5 45 25
-bonobo 20 0 20
-bonobo-devel 0 0 35
-bootparamd 20 78 0
-bug-buddy 0 0 20
-byacc 16 0 80
-bzflag -1 -1 -1
-bzip2 41 85 75
-caching-nameserver 0 70 0
-cbb 55 0 13
-cdecl 10 0 70
-cdialog 3 0 20
-cdp 40 0 27
-cdparanoia 45 0 45
-cdparanoia-devel 0 0 30
-cdrecord 45 0 45
-cdrecord-cdda2wav 44 0 45
-cdrecord-devel 10 0 0
-cervisia 0 0 0
-cfengine 0 30 0
-chkconfig 0 65 10
-chkfontpath 0 0 50
-chromium -1 -1 -1
-clanbomber 65 0 25
-cleanfeed 24 65 21
-clisp 0 0 15
-compat-glibc 0 0 40
-compat-libs 0 0 0
-comsat 0 30 2
-console-tools 97 97 97
-console-tools-devel 0 0 0
-control-center 69 0 10
-control-center-devel 0 0 0
-control-panel 2 0 2
-cooledit 0 0 30
-corewars 0 15 0
-cpio 90 89 90
-cproto 15 0 61
-cracklib 10 85 35
-cracklib-devel 0 0 15
-cracklib-dicts 10 82 35
-crontabs 95 95 95
-csmash -1 -1 -1
-ctags 10 0 80
-cttex -30 -30 -30
-cups -99 -99 -99
-cups-devel 0 0 20
-cups-drivers -99 -99 -99
-cvs 18 60 72
-cvsweb 0 0 30
-cxhextris 50 0 36
-detect 25 25 75
-detect-devel 0 0 60
-detect-lst 25 25 75
-dev 99 99 99
-dev86 0 0 40
-dev86-devel 0 0 40
-devfsd 0 0 0
-dhcp -99 80 -99
-dhcp-client 0 79 5
-dhcp-relay 0 10 0
-dhcpcd 0 0 0
-dhcpxd 0 0 0
-dia 30 0 30
-dialog 10 0 71
-diffstat 12 50 87
-diffutils 42 55 87
-dip 40 45 13
-docbook-dtd31-sgml 30 0 45
-docbook-style-dsssl 5 15 15
-docbook-style-dsssl-doc 4 14 14
-dosemu 45 0 49
-dosemu-freedos 45 0 49
-dosfstools 40 15 22
-doxygen 0 0 40
-dpsftp 45 0 0
-dpsftplib 45 0 0
-dpsftplib-devel 45 0 15
-drakfloppy 84 0 84
-drakfont 84 0 84
-drakxtools 86 80 87
-dump 10 75 87
-e2fsprogs 98 98 98
-e2fsprogs-devel 0 0 25
-eMusic 65 0 50
-ed 45 10 5
-ee 58 0 54
-efax 25 78 30
-egcs 5 0 50
-egcs-c++ 5 0 50
-egcs-cpp 5 0 50
-egcs-g77 5 0 50
-egcs-objc 5 0 50
-egcs-objc-devel 4 0 20
-eggdrop 25 0 25
-eject 92 33 91
-elm 22 5 13
-emacs 49 45 0
-emacs-X11 51 0 69
-emacs-el 0 0 15
-emacs-leim 20 0 50
-emacs-nox 20 0 14
-emacs-pcomplete 20 0 30
-emacs-tramp 20 20 30
-enlightenment 41 0 55
-enscript 20 25 71
-eog 30 0 20
-eperl 0 0 10
-eshell 20 0 30
-esound 0 0 0
-esound-devel 12 0 4
-etcskel 98 98 98
-ethemes 40 0 35
-exmh 40 0 36
-expect 23 0 71
-ext2ed 5 52 42
-ext2resize 5 52 42
-faces 20 75 15
-faces-devel 10 0 0
-faces-xface 20 0 15
-faq 63 49 53
-fbset 22 0 0
-fdutils 10 0 0
-fetchmail 45 99 31
-fetchmail-daemon 20 30 20
-fetchmailconf 45 0 40
-file 92 92 94
-filesystem 99 99 99
-fileutils 99 99 99
-findutils 97 97 97
-finger 40 35 27
-finger-server 0 30 0
-flex 13 0 72
-fltk 0 0 0
-fltk-devel 0 0 15
-fmirror 45 35 40
-fnlib 10 0 7
-fnlib-devel 10 0 0
-fonts-ttf-armenian -10 0 -10
-fonts-ttf-big5 -10 0 -10
-fonts-ttf-decoratives 72 0 68
-fonts-ttf-gb2312 -10 0 -10
-fonts-ttf-japanese -10 0 -10
-fonts-ttf-korean -10 0 -10
-fonts-ttf-west_european 77 0 74
-fonts-type1-baltic -15 -15 -15
-fortune-mod 10 0 10
-freeciv 54 0 53
-freetype 10 0 4
-freetype-devel 10 0 0
-fribidi 0 0 0
-fribidi-devel 0 0 0
-ftp 90 92 90
-fvwm 12 0 15
-fvwm2 17 0 17
-fvwm2-icons 17 0 17
-fwhois 25 45 36
-g-print 20 0 20
-g-wrap 0 0 40
-g-wrap-devel 0 0 20
-gaddr 45 0 40
-gaim 35 0 30
-gated 0 80 0
-gatos 55 0 49
-gawk 10 55 87
-gawk-doc 10 35 50
-gcc 50 40 90
-gcc-c++ 15 0 74
-gcc-chill 20 0 65
-gcc-colorgcc 0 0 0
-gcc-cpp 47 0 72
-gcc-fr 0 0 0
-gcc-g77 15 0 27
-gcc-java 16 0 65
-gcc-libgcj 15 0 30
-gcc-objc 16 0 35
-gcombust 40 0 0
-gd 12 0 71
-gd-devel 10 0 71
-gd-utils 45 0 64
-gdb 12 0 94
-gdbm 12 0 72
-gdbm-devel 10 0 72
-gdk-pixbuf 68 0 70
-gdk-pixbuf-devel 0 0 40
-gdm 67 0 55
-gedit 68 0 62
-gedit-devel 0 0 0
-genromfs 10 0 9
-gentoo 30 0 0
-gettext 10 15 71
-gettext-devel 0 0 35
-getty_ps 99 99 99
-gfcc 15 0 31
-gftp 67 0 62
-ggv 25 0 0
-ghc 0 0 35
-ghc-prof 0 0 2
-ghostscript 40 70 75
-ghostscript-utils 30 50 55
-ghostscript-fonts 22 55 75
-ghostscript-module-SVGALIB 10 0 63
-ghostscript-module-X 40 60 65
-gif2png 10 0 20
-giftrans 42 0 71
-gimp 69 0 67
-gimp-data-extras 55 0 58
-gimp-devel 10 0 40
-gimp-libgimp 10 0 50
-gimp-perl 30 0 30
-git 69 35 54
-gkrellm 15 30 15
-gkrellm-devel 0 0 20
-glade 17 0 57
-glademm 0 0 40
-glib 1 0 0
-glib-devel 10 0 87
-glibc 1 99 96
-glibc-devel 25 0 76
-glibc-profile 1 0 54
-gltron -1 -1 -1
-gmc 68 0 59
-gmp 17 0 71
-gmp-devel 10 0 71
-gnomba 24 0 24
-gnome-applets 68 0 55
-gnome-audio 60 0 55
-gnome-audio-extra 55 0 50
-gnome-chess 60 0 55
-gnome-core 68 0 55
-gnome-core-devel 10 0 55
-gnome-games 60 0 59
-gnome-games-devel 10 0 0
-gnome-guile 0 0 50
-gnome-guile-devel 10 0 50
-gnome-iconedit 60 0 55
-gnome-libs 68 0 55
-gnome-libs-devel 10 0 55
-gnome-linuxconf 74 0 74
-gnome-media 60 0 58
-gnome-network 60 0 58
-gnome-objc 0 0 40
-gnome-objc-devel 10 0 40
-gnome-pilot 55 0 45
-gnome-pilot-conduits 45 0 35
-gnome-pilot-devel 0 15 0
-gnome-pim 61 0 70
-gnome-pim-conduits 51 0 60
-gnome-pim-devel 10 0 70
-gnome-print 62 0 55
-gnome-print-devel 10 0 55
-gnome-tiles 60 0 55
-gnome-toaster 65 0 61
-gnome-users-guide 66 0 60
-gnome-utils 66 0 50
-gnome-vfs 0 0 0
-gnome-vfs-devel 0 0 30
-gnomeicu 61 0 58
-gnomemm 0 0 40
-gnomemm-devel 0 0 30
-gnorpm 74 0 71
-gnozip 50 0 60
-gnucash 35 0 15
-gnucash-devel 0 0 12
-gnuchess 40 0 31
-gnumeric 67 0 58
-gnuplot 65 0 53
-gnus 20 0 14
-gob 0 0 20
-gperf 12 0 72
-gphoto 60 0 58
-gpm 0 65 87
-gpm-devel 10 0 55
-gprolog 5 5 45
-gps 30 15 30
-gqcam 0 0 0
-gqview 55 0 49
-grep 0 92 94
-grip 60 0 35
-groff 0 0 62
-groff-for-man 0 0 0
-groff-gxditview 22 0 19
-groff-perl 0 0 0
-grpmi 0 0 0
-grub 99 99 99
-grub-doc 0 0 25
-gsl 10 0 0
-gsl-devel 0 0 0
-gsu 65 0 53
-gtk+ 0 0 70
-gtk+-devel 10 0 70
-gtk+licq 45 0 30
-gtk+mdk 0 0 15
-gtk+mdk-devel 0 0 15
-gtk-engines 0 0 70
-gtk-themes 50 0 20
-gtkdialogs 0 0 0
-gtkeyboard 20 0 0
-gtkglarea 10 0 15
-gtkglarea-devel 0 0 15
-gtkgo 15 0 5
-gtkgraph 65 0 35
-gtkhtml 0 0 0
-gtkhtml-devel 0 0 0
-gtkmm 20 0 55
-gtkmm-devel 20 0 55
-gtktalog 52 0 25
-gtkzip 60 0 58
-gtop 60 0 58
-gtulpas 10 0 10
-guile 11 0 75
-guile-devel 10 0 75
-gurpmi 82 0 86
-gv 55 0 49
-gzip 98 98 98
-hackkernel 0 0 0
-hackkernel-doc 0 0 0
-hackkernel-headers 0 0 0
-hackkernel-pcmcia-cs 0 0 0
-hackkernel-source 0 0 0
-happy 0 0 25
-harddrake 83 0 83
-haskell-GTK 0 0 10
-haskell-GTK-devel 0 0 10
-hdparm 98 98 98
-heartbeat -1 25 -1
-hexedit 91 91 91
-howto-html-de -30 -30 -30
-howto-html-el -30 -30 -30
-howto-html-en -30 -30 -30
-howto-html-es -30 -30 -30
-howto-html-fr -30 -30 -30
-howto-html-hr -30 -30 -30
-howto-html-id -30 -30 -30
-howto-html-it -30 -30 -30
-howto-html-ja -30 -30 -30
-howto-html-ko -30 -30 -30
-howto-html-pl -30 -30 -30
-howto-html-ro -30 -30 -30
-howto-html-sl -30 -30 -30
-howto-html-sv -30 -30 -30
-howto-html-zh -30 -30 -30
-howto-utils 0 0 0
-hugs98 0 0 15
-hylafax 0 0 0
-hylafax-client 0 0 0
-hylafax-server 0 0 0
-ibtk 20 0 13
-ical 40 0 27
-icepref 50 0 54
-icewm 65 0 78
-icewm-light 90 0 80
-imap 0 80 6
-imap-devel 0 0 6
-imlib 10 0 71
-imlib-cfgeditor 70 0 71
-imlib-devel 10 0 50
-imwheel 78 60 73
-indent 20 0 91
-indexhtml 0 87 76
-inews 6 12 15
-info 20 65 70
-info-install 0 0 10
-initscripts 99 99 99
-inn 0 55 0
-inn-devel 0 0 0
-intimed 0 55 10
-ipchains 15 98 13
-iplog 15 15 15
-iproute2 0 30 0
-ipvsadm 0 15 0
-ipxutils 20 85 9
-irda-utils -1 -1 -1
-irssi 59 0 57
-isapnptools 43 73 73
-isapnptools-devel 0 0 70
-isdn4k-utils -99 -99 -99
-isdn4net -99 -99 -99
-isicom 20 0 13
-ispell 49 15 22
-ispell-af -15 -15 -15
-ispell-br -15 -15 -15
-ispell-ca -15 -15 -15
-ispell-cs -15 -15 -15
-ispell-da -15 -15 -15
-ispell-de -15 -15 -15
-ispell-el -15 -15 -15
-ispell-en -15 -15 -15
-ispell-eo -15 -15 -15
-ispell-es -15 -15 -15
-ispell-fi -15 -15 -15
-ispell-fr -15 -15 -15
-ispell-ga -15 -15 -15
-ispell-gd -15 -15 -15
-ispell-gv -15 -15 -15
-ispell-id -15 -15 -15
-ispell-it -15 -15 -15
-ispell-nl -15 -15 -15
-ispell-no -15 -15 -15
-ispell-pl -15 -15 -15
-ispell-pt -15 -15 -15
-ispell-pt_BR -15 -15 -15
-ispell-ro -15 -15 -15
-ispell-ru -15 -15 -15
-ispell-sk -15 -15 -15
-ispell-sl -15 -15 -15
-ispell-sv -15 -15 -15
-itcl 10 0 60
-jadetex 15 0 45
-jed 16 18 14
-jed-common 0 18 0
-jed-xjed 40 0 22
-jikes 1 0 65
-joe 20 20 15
-kaffe 10 0 60
-kdbg 15 0 27
-kde1-compat 0 0 0
-kde1-compat-devel 0 0 0
-kdeaddutils 73 0 62
-kdeaddutils-devel 1 1 50
-kdeadmin 72 0 60
-kdebase 79 40 68
-kdebase-devel 1 1 60
-kdegames 71 0 59
-kdegraphics 77 40 66
-kdegraphics-devel 1 1 60
-kdelibs 0 0 0
-kdelibs-devel 1 1 60
-kdelibs-sound 60 0 55
-kdelibs-sound-devel 1 1 60
-kdemultimedia 77 0 66
-kdemultimedia-devel 1 1 60
-kdenetwork 72 0 60
-kdenetwork-devel 1 1 60
-kdepim 72 0 63
-kdesdk 0 0 35
-kdesupport 0 0 0
-kdesupport-devel 0 0 15
-kdetoys 70 0 65
-kdeutils 78 0 67
-kdiff 0 0 0
-kdiskcat 0 0 0
-kdoc 0 0 35
-kernel 99 99 99
-kernel-doc 5 50 65
-kernel-headers 1 45 94
-kernel-linus -1 -1 -1
-kernel-pcmcia-cs -1 -1 -1
-kernel-secure 0 0 0
-kernel-smp -1 -1 -1
-kernel-source 0 45 65
-kernel-utils 0 5 25
-kfilecoder 0 0 0
-kfirewall 0 0 0
-kfortune 0 0 0
-kfsstatus 0 0 0
-kfun21 0 0 0
-kimon 0 0 0
-kinput2-wnn4 -15 -15 -15
-kisocd 0 0 0
-kless 0 0 0
-klilo 0 0 0
-klyx 0 0 0
-kmag 0 0 0
-kmol 0 0 0
-kmp3 0 0 0
-kmp3te 0 0 0
-koffice 69 0 55
-koffice-devel 0 0 35
-kon2 -12 -60 -15
-kover 69 0 60
-kpacman 0 0 0
-kreglo 0 0 0
-krubik 0 0 0
-ksendfax 0 0 0
-kslide 0 0 0
-ktail 0 0 0
-ktelnet 0 0 0
-kterm -10 -90 -10
-kudzu 97 0 97
-kudzu-devel 0 0 43
-kups 60 0 50
-kups-devel 0 0 0
-kvideogen 0 0 0
-kvirc 69 0 56
-kvoice 0 0 0
-kvoicecontrol 0 0 0
-kwebget 0 0 0
-lame 15 40 35
-latex2html 25 0 50
-latte 0 0 45
-ld.so 98 98 98
-leafnode 0 50 0
-less 97 97 97
-lesstif 0 0 0
-lesstif-clients 0 0 0
-lesstif-devel 0 0 0
-lesstif-mwm 2 0 2
-lftp 50 78 83
-lha 40 25 72
-libPropList 10 0 80
-libPropList-devel 0 0 34
-libc 10 15 75
-libelf 10 15 80
-libghttp 10 0 55
-libghttp-devel 10 0 55
-libglade 10 0 55
-libglade-devel 10 0 40
-libgr 10 0 71
-libgr-devel 10 0 70
-libgr-progs 10 0 9
-libgtop 10 0 55
-libgtop-devel 10 0 55
-libjpeg 10 0 71
-libjpeg-devel 10 0 70
-libmikmod 10 0 55
-libmikmod-devel 10 0 55
-libnet 97 97 97
-libole2 0 0 0
-libole2-devel 0 0 0
-libpcap 10 80 72
-libpcap-devel 0 0 0
-libpng 10 0 71
-libpng-devel 10 0 71
-librep 10 0 50
-librep-devel 10 0 50
-libsafe 0 0 35
-libsigc++ 0 0 25
-libsigc++-devel 0 0 25
-libsigc++-examples 0 0 25
-libstdc++ 10 0 80
-libstdc++-compat 10 0 60
-libstdc++-devel 10 0 80
-libtabe -15 -90 -15
-libtabe-devel -15 -90 -15
-libtermcap 10 55 87
-libtermcap-devel 10 0 64
-libtiff 10 0 72
-libtiff-devel 10 0 72
-libtool 10 0 85
-libtool-devel 0 0 0
-libungif 10 0 72
-libungif-devel 10 0 72
-libungif-progs 10 0 2
-libunicode 10 0 80
-libunicode-devel 0 0 50
-libwmf 0 0 15
-libxml 10 0 71
-libxml-devel 10 0 71
-libxml2 10 0 71
-libxml2-devel 10 0 71
-licq 62 0 45
-licq-autoreply 45 0 30
-licq-console 45 0 30
-licq-devel 0 0 20
-licq-forwarder 45 0 30
-licq-rms 45 0 30
-licq-update-hosts 45 0 30
-lilo 99 99 99
-lilo-doc 0 0 30
-links 20 25 20
-linux_logo 92 72 92
-linuxconf 90 79 86
-linuxconf-gui -1 -1 -1
-linuxconf-lib 0 0 0
-linuxconf-util 0 0 0
-linuxconf 90 79 86
-linuxconf-devel 10 0 70
-lkmpg 2 0 65
-locales 96 76 96
-locales-af -1 -1 -1
-locales-ar -1 -1 -1
-locales-az -1 -1 -1
-locales-be -1 -1 -1
-locales-bg -1 -1 -1
-locales-br -1 -1 -1
-locales-ca -1 -1 -1
-locales-cs -1 -1 -1
-locales-cy -1 -1 -1
-locales-da -1 -1 -1
-locales-de -1 -1 -1
-locales-el -1 -1 -1
-locales-en -1 -1 -1
-locales-eo -1 -1 -1
-locales-es -1 -1 -1
-locales-et -1 -1 -1
-locales-eu -1 -1 -1
-locales-fa -1 -1 -1
-locales-fi -1 -1 -1
-locales-fo -1 -1 -1
-locales-ur -1 -1 -1
-locales-fr -1 -1 -1
-locales-ga -1 -1 -1
-locales-gd -1 -1 -1
-locales-gl -1 -1 -1
-locales-gv -1 -1 -1
-locales-he -1 -1 -1
-locales-hi -1 -1 -1
-locales-hr -1 -1 -1
-locales-hu -1 -1 -1
-locales-hy -1 -1 -1
-locales-id -1 -1 -1
-locales-is -1 -1 -1
-locales-it -1 -1 -1
-locales-ja -1 -1 -1
-locales-ka -1 -1 -1
-locales-kl -1 -1 -1
-locales-ko -1 -1 -1
-locales-kw -1 -1 -1
-locales-lo -1 -1 -1
-locales-lt -1 -1 -1
-locales-lv -1 -1 -1
-locales-mi -1 -1 -1
-locales-mk -1 -1 -1
-locales-ms -1 -1 -1
-locales-nl -1 -1 -1
-locales-no -1 -1 -1
-locales-oc -1 -1 -1
-locales-pd -1 -1 -1
-locales-ph -1 -1 -1
-locales-pl -1 -1 -1
-locales-pp -1 -1 -1
-locales-pt -1 -1 -1
-locales-ro -1 -1 -1
-locales-ru -1 -1 -1
-locales-sk -1 -1 -1
-locales-sl -1 -1 -1
-locales-sq -1 -1 -1
-locales-sr -1 -1 -1
-locales-sv -1 -1 -1
-locales-ta -1 -1 -1
-locales-tg -1 -1 -1
-locales-th -1 -1 -1
-locales-tr -1 -1 -1
-locales-tt -1 -1 -1
-locales-uk -1 -1 -1
-locales-vi -1 -1 -1
-locales-wa -1 -1 -1
-locales-yi -1 -1 -1
-locales-zh -1 -1 -1
-logrotate 0 25 15
-losetup 5 45 35
-lout 15 35 10
-lout-doc 31 32 10
-lpg 40 0 80
-lpr -99 -99 -99
-lrzsz 0 34 0
-lslk 20 49 54
-lsof 10 0 67
-ltrace 10 0 0
-lynx 42 78 84
-lyx 50 0 58
-m4 15 0 80
-macutils 22 5 19
-mailcap 5 5 4
-mailx 92 92 92
-make 50 50 94
-man 90 65 72
-man-pages 90 65 72
-man-pages-cs -10 -30 -25
-man-pages-de -10 -30 -25
-man-pages-es -10 -30 -25
-man-pages-fr -10 -30 -25
-man-pages-hu -10 -30 -25
-man-pages-id -10 -30 -25
-man-pages-it -10 -30 -25
-man-pages-ja -10 -30 -25
-man-pages-ko -10 -30 -25
-man-pages-pl -10 -30 -25
-man-pages-ru -10 -30 -25
-man-pages-zh -10 -30 -25
-mandrake-release 99 99 99
-mandrake_desk 88 0 88
-mandrake_doc-de -15 -90 -25
-mandrake_doc-en -15 -90 -25
-mandrake_doc-es -15 -90 -25
-mandrake_doc-fr -15 -90 -25
-mandrake_doc-it -15 -90 -25
-mandrake_doc-ru -15 -90 -25
-mars-nwe 0 35 0
-mathplot 30 0 20
-mawk 0 25 80
-mc 49 45 31
-mcserv 0 40 9
-mek 40 0 0
-memprof 2 5 65
-menu 90 0 80
-menudrake 79 75 75
-userdrake 50 0 40
-mercury 0 0 45
-metamail 40 80 50
-mgetty 24 20 9
-mgetty-contrib 28 20 15
-mgetty-sendfax 28 20 15
-mgetty-viewfax 28 20 15
-mgetty-voice 28 20 15
-mikmod 42 0 10
-mingetty 5 25 15
-minicom 27 0 4
-mirrordir 26 99 0
-mkbootdisk 35 55 60
-mkinitrd 99 99 99
-mkisofs 26 0 13
-mktemp 15 75 65
-mkxauth 2 99 1
-mm 0 0 15
-mm-devel 0 0 0
-mod_php -99 35 -99
-php-gd -99 15 -99
-php-imap -99 15 -99
-php-ldap -99 15 -99
-php-mysql -99 15 -99
-php-pgsql -99 15 -99
-php-oracle -99 15 -99
-php-dba_gdbm_db2 -99 15 -99
-php-readline -99 15 -99
-mod_ssl -99 75 -99
-mod_ssl-sxnet -99 30 -99
-modutils 99 99 99
-mon 0 40 0
-mount 97 97 97
-mouseconfig 0 0 0
-mozilla-fonts 0 0 0
-mp3info 50 20 50
-mpage 55 65 80
-mpeg_lib 0 0 0
-mpeg_lib-devel 0 0 30
-mpeg_lib-devel 0 0 0
-mpg123 42 0 42
-msec 98 98 98
-mt-st 40 0 49
-mtools 90 0 84
-mutt 10 0 10
-mxp 0 0 0
-nag 35 75 25
-nasm 20 20 65
-nasm-doc 0 20 65
-nasm-rdoff 0 20 65
-nc 0 0 0
-ncftp 55 0 49
-sftp 15 10 15
-ncompress 42 79 91
-ncpfs 0 0 0
-ncurses 0 0 80
-ncurses-extraterms 0 0 0
-ncurses-devel 10 0 75
-nedit 45 20 65
-net-tools 95 96 95
-netkit-base 82 99 82
-netscape-castellano -13 -30 -18
-netscape-catalan -13 -30 -18
-netscape-common 0 0 0
-netscape-communicator 78 60 73
-netscape-euskara -13 -30 -18
-netscape-francais -13 -30 -18
-netscape-german -13 -30 -18
-netscape-japanese -13 -30 -18
-netscape-navigator 0 0 0
-netscape-polish -13 -30 -18
-netscape-russian -13 -30 -18
-netscape-spanish -13 -30 -18
-netscape-walon -13 -30 -18
-newt 10 0 75
-newt-devel 10 0 75
-nfs-utils -99 80 13
-nfs-utils-clients 23 75 23
-nist 55 0 45
-nmap 5 40 40
-nmap-frontend 5 40 40
-nmh 0 0 0
-nscd 0 40 0
-nss_ldap 0 55 25
-ntp -1 -1 -1
-ntsysv 0 65 25
-numlock -11 -11 -11
-oaf 0 0 0
-oaf-devel 0 0 0
-ocaml 0 0 35
-octave 0 0 30
-oggvorbis 30 10 20
-oggvorbis-devel 0 0 15
-oggvorbis-examples 0 0 15
-open 20 45 80
-openjade 5 15 15
-openldap 0 50 35
-openldap-devel 0 0 25
-openssl 0 0 0
-openssl-devel 0 0 0
-oregano 0 0 0
-p2c 10 0 71
-p2c-devel 10 0 55
-pam 7 99 91
-pam-devel 0 0 0
-pam-doc 0 50 50
-pan 22 0 0
-pango 10 0 10
-pango-devel 0 0 10
-parted 35 35 35
-parted-devel 0 0 35
-passwd 99 99 99
-patch 14 0 72
-pciutils 16 55 55
-pciutils-devel 0 0 20
-pdksh 10 25 9
-penguin-command 35 0 10
-perl 20 19 90
-perl-Apache-Filter 0 0 0
-perl-Apache-SSI 0 0 0
-perl-Apache-Session 0 0 0
-perl-Compress-Zlib 0 0 0
-perl-Convert-BER 0 0 0
-perl-DBI 10 0 65
-perl-DBIx-Recordset 0 0 0
-perl-DB_File 10 0 50
-perl-Data-ShowTable 10 0 50
-perl-Date-Calc 0 0 0
-perl-DateManip 0 0 0
-perl-Devel-Symdump 0 0 0
-perl-Digest-MD5 10 0 70
-perl-ExtUtils_F77 0 0 0
-perl-File-Tail 0 0 0
-perl-GTK 10 0 72
-perl-GTK-GLArea 10 0 70
-perl-GTK-GdkImlib 10 0 70
-perl-GTK-Glade 10 0 70
-perl-GTK-Gnome 10 0 70
-perl-GTK-GtkHTML 0 0 0
-perl-HTML-Clean 0 0 0
-perl-HTML-Parser 10 0 55
-perl-HTML-SimpleParse 10 0 50
-perl-IO-stringy 5 0 65
-perl-MIME-Base64 5 0 45
-perl-MIME-tools 5 0 50
-perl-MLDBM 0 0 0
-perl-MP3-Info 5 0 40
-perl-Magick 0 0 0
-perl-MailTools 5 0 50
-perl-Mon 0 0 0
-perl-Msgcat 5 0 50
-perl-Mysql 5 0 40
-perl-Net-Telnet 0 0 0
-perl-Net_SSLeay 0 0 0
-perl-PDL 10 0 75
-perl-PDL-doc 0 0 0
-perl-Parse-RecDescent 10 0 75
-perl-Parse-Yapp 0 0 0
-perl-Period 0 0 0
-perl-RPM 0 0 0
-perl-Storable 0 0 0
-perl-Term-Readline-Gnu 10 10 88
-perl-Tie-Cache 0 0 0
-perl-Time-HiRes 0 0 0
-perl-TimeDate 0 0 0
-perl-Tk 0 15 0
-perl-Tk-devel 0 0 0
-perl-Tk-doc 0 0 0
-perl-URI 5 0 50
-perl-XML-Parser 0 0 0
-perl-XML-XSLT 0 0 0
-perl-base 0 0 0
-perl-devel 0 0 30
-perl-libnet 10 10 80
-perl-libwww-perl 10 10 80
-perl-libxml-enno 0 0 0
-perl-libxml-perl 0 0 0
-perl-Array-RefElem 0 0 0
-perl-Data-DumpXML 0 0 0
-perl-ExtUtils-PerlPP 0 0 0
-perl-File-NCopy 0 0 0
-perl-Image-Size 0 0 0
-perl-Mail-Sendmail 0 0 0
-perl-Net-XWhois 0 0 0
-perl-XML-RSS 0 0 0
-perlftlib 10 0 0
-php 0 35 5
-php-devel 0 0 5
-php-manual 0 0 5
-pidentd 15 69 87
-pilot-link 40 0 27
-perl-PDA-Pilot 0 0 0
-pilot-link-devel 11 0 25
-pine 40 0 27
-pinfo 20 20 20
-pingus 40 0 10
-piranha 0 10 0
-piranha-docs 0 10 0
-piranha-gui 0 10 0
-playmidi 43 0 19
-playmidi-X11 53 0 20
-plugger 40 0 40
-pmake 22 0 75
-pmake-customs 12 0 72
-popt 10 0 80
-popt-devel 0 0 45
-portmap 0 91 19
-postfix 20 88 51
-postgresql 0 56 23
-postgresql-devel 0 0 23
-postgresql-jdbc 0 0 15
-postgresql-odbc 0 0 23
-postgresql-perl 0 0 23
-postgresql-python 0 0 5
-postgresql-server 0 56 23
-postgresql-tcl 0 0 23
-postgresql-test 0 0 23
-postgresql-tk 0 0 5
-ppp 0 0 0
-pppoe-linuxconf 0 0 0
-pptp-adsl-fr -99 -99 -99
-pptp-client -99 -99 -99
-procinfo 24 15 96
-procmail 2 65 45
-procps 98 98 98
-procps-X11 50 0 32
-procps-devel 0 0 0
-proftpd -99 -99 -99
-psacct 20 70 87
-psmisc 25 62 56
-pspell 0 0 0
-pspell-devel 0 0 0
-psutils 5 42 15
-pth 0 0 25
-pth-devel 0 0 15
-publib-devel 0 0 0
-pump 0 0 0
-pump-devel 0 0 0
-pwdb 13 90 75
-pwdb-devel 0 0 50
-pygnome 12 0 50
-pygnome-applet 10 0 30
-pygnome-capplet 10 0 30
-pygnome-libglade 10 0 30
-pygtk 13 0 50
-pygtk-glarea 15 0 25
-pygtk-libglade 16 0 50
-pysol 27 0 27
-python 15 0 74
-python-devel 0 0 65
-python-docs 31 0 40
-python-imaging 31 0 40
-pythonlib 17 0 75
-qcad 5 0 5
-qiv 78 0 70
-qt 0 0 55
-qt-devel 10 0 55
-qt-qgl 10 0 50
-qt-qimgio 10 0 50
-qt2 0 0 45
-qt2-devel 0 0 45
-qt2-doc 0 0 30
-qtcups 0 0 0
-qtcups-devel 0 0 0
-queso 0 25 35
-quota 42 85 37
-raidtools 25 85 4
-rcs 12 0 71
-rdate 10 80 9
-rdist 10 75 9
-readline 11 0 70
-readline-devel 11 0 65
-recode 10 0 72
-recode-devel 0 0 50
-reiserfs-utils 60 60 60
-rep-gtk 0 0 20
-rep-gtk-gnome 0 0 20
-rep-gtk-libglade 0 0 20
-rgrep 55 55 75
-rhs-printfilters 1 1 0
-rmt 24 0 24
-rocksndiamonds 35 0 10
-rootfiles 99 99 99
-routed 0 90 19
-rp-pppoe -99 -99 -99
-rpm 99 99 99
-rpm-build 45 45 70
-rpm-devel 10 0 80
-rpm-python 0 0 50
-rpmdrake 84 0 81
-rpmlint 10 10 60
-rpmtools 0 0 25
-rpmtools-compat 0 0 0
-rpmtools-devel 0 0 25
-rsh 46 99 75
-rsh-server -99 55 25
-rsync 20 99 75
-ruby 0 0 25
-ruby-doc 0 0 25
-ruby-extensions 0 0 25
-ruby-gtk 0 0 25
-rusers 20 0 20
-rute -50 -75 -60
-rwall -1 0 -1
-rwho -1 0 -1
-rxvt 49 0 80
-rxvt-CLE -10 -90 -10
-sag 39 35 25
-samba 21 99 23
-samba-client 55 56 50
-samba-common 0 0 0
-sane 45 0 53
-sane-devel 10 0 2
-sash 5 5 5
-sawfish 59 0 57
-sawfish-themer 15 0 15
-sawfish-themes 50 0 50
-screen 26 43 79
-sed 97 97 97
-sendmail -99 -99 -99
-sendmail-cf 0 0 0
-sendmail-doc 0 0 0
-setserial 42 0 55
-setup 15 25 15
-sfm 25 0 25
-sgml-common 5 15 15
-sgml-tools 5 15 15
-sh-utils 97 97 97
-shadow-utils 98 98 98
-shapecfg 20 75 8
-sharutils 43 99 38
-sketch 45 0 0
-slang 12 0 75
-slang-devel 10 0 70
-slang-doc 0 0 70
-slocate 99 99 99
-slrn 10 0 10
-slrn-pull 35 0 45
-smpeg 50 0 25
-smpeg-devel 0 0 25
-sndconfig 70 40 70
-sox 41 32 80
-sox-devel 13 0 70
-space_sounds 52 0 55
-spacecup -1 -1 -1
-spec-helper 0 0 35
-spellutils 0 0 0
-spruce 0 0 0
-squid 0 45 16
-stat 5 55 45
-statserial 15 0 13
-strace 11 0 87
-sudo 0 30 0
-svgalib 10 0 63
-svgalib-devel 10 0 63
-swatch 22 65 4
-swi-prolog 5 5 45
-swig 0 0 20
-swig-devel 0 0 10
-symlinks 23 75 29
-sympa -1 40 -1
-sysklogd 97 97 97
-t1lib 1 0 29
-t1lib-devel 10 0 40
-taipeifonts -10 0 -10
-talk 44 0 39
-talk-server 0 0 0
-taper 42 0 27
-tar 97 97 97
-tcl 12 0 70
-tcllib 0 0 0
-tclx 12 0 70
-tcp_wrappers 0 99 0
-tcp_wrappers-devel 0 0 0
-tcpdump 10 79 2
-tcsh 1 25 15
-telnet 90 79 92
-openssh 65 75 65
-openssh-server -99 35 -99
-openssh-clients 65 75 65
-openssh-askpass 0 0 0
-openssh-askpass-gnome 0 0 0
-gnupg 90 90 90
-telnet-server -99 28 -99
-termcap 98 98 98
-tetex 25 0 50
-tetex-afm 25 0 40
-tetex-doc 25 0 40
-tetex-dvilj 40 0 40
-tetex-dvips 25 0 40
-tetex-latex 25 0 40
-tetex-latex-heb -65 -90 -90
-tetex-xdvi 25 0 50
-texinfo 22 0 50
-textutils 99 99 99
-teyjus 0 0 35
-tftp 0 40 2
-tftp-server 0 40 2
-thud 0 0 0
-time 40 65 87
-timeconfig 55 80 60
-timed 40 70 36
-timetool 54 0 57
-timidity-instruments 51 0 54
-tin 44 0 39
-tix 15 0 60
-tk 15 0 60
-tkbabel 15 0 15
-tkcvs 15 0 15
-tkinter 15 0 60
-tksysv 55 0 60
-tmake 10 0 25
-tmpwatch 35 75 60
-traceroute 40 79 29
-transfig 16 0 14
-tree 40 25 10
-trn 46 0 41
-trophy 35 0 10
-tunelp 24 15 28
-tuxracer -1 -1 -1
-ucd-snmp 0 70 45
-ucd-snmp-devel 0 25 45
-ucd-snmp-utils 0 37 45
-umb-scheme 10 0 65
-unarj 40 45 16
-units 22 0 10
-unixODBC 0 0 0
-unzip 70 75 91
-urlview 43 0 47
-urpmi 95 95 95
-urw-fonts 50 0 34
-usbview 5 0 10
-usermode 51 0 58
-usernet 42 55 37
-utempter 90 0 73
-utempter-devel 0 0 0
-util-linux 98 98 98
-uucp 0 80 2
-uxcook 0 0 0
-vigmeup 23 0 11
-vim-X11 52 0 26
-vim-common 0 19 0
-vim-enhanced 46 78 83
-vim-minimal 98 98 98
-vimguide 30 0 25
-vixie-cron 97 97 97
-vlock 40 99 80
-vnc 44 0 39
-vnc-SVGALIB 43 0 38
-vnc-doc 38 35 33
-vnc-java 38 0 34
-vnc-server 0 40 28
-webmin 20 40 20
-wget 65 75 53
-which 1 25 25
-wine 54 0 57
-wine-devel 0 0 0
-wmakerconf 47 0 57
-wmnet 24 0 21
-words 47 85 42
-wu-ftpd -99 85 -99
-wv 55 0 54
-wv-devel 0 0 0
-x3270 1 0 0
-xa+cv -10 -20 -10
-xalf 68 0 55
-xanim 58 0 54
-xbanner 15 0 12
-xboard 54 0 48
-xboing 53 0 47
-xcdroast 59 0 53
-xchat 58 0 52
-xcin -10 -10 -10
-xcpustate 53 0 47
-xdaliclock 57 0 51
-xdelta 16 0 5
-xdelta-devel 10 0 2
-xdosemu 34 0 37
-xearth 53 0 56
-xemacs 57 0 0
-xemacs-el 0 0 15
-xemacs-extras 50 0 36
-xemacs-info 54 0 42
-xemacs-mule 0 0 0
-xfce 0 0 0
-xfig 39 0 33
-xfishtank 51 0 45
-xgammon 40 0 31
-xinetd 0 0 0
-xinetd-devel 0 0 0
-xinitrc 0 0 0
-xinput 10 0 30
-xjewel 58 0 52
-xkobo 57 0 51
-xli 65 0 60
-xlispstat 2 0 45
-xloadimage 45 0 30
-xlockmore 58 0 52
-xmailbox 53 0 47
-xmame 25 0 25
-xmess 25 0 15
-xmms 64 0 57
-xmms-devel 0 0 15
-xmms-esd 46 0 41
-xmms-gnome 62 0 52
-xmms-kjofol-skins 50 0 50
-xmms-mesa -1 -1 -1
-xmms-mikmod 43 0 38
-xmms-more-vis-plugins 55 0 55
-xmms-oggvorbis 64 0 57
-xmms-skins 60 0 55
-xmms-smpeg 50 0 45
-xmorph 52 0 44
-xmovie 55 0 35
-xntp3 0 75 31
-xoscope 10 0 10
-xosview 51 0 45
-xpaint 53 0 47
-xpat2 43 0 38
-xpcd 40 0 30
-xpcd-gimp 30 0 25
-xpcd-svga 0 0 0
-xpdf 57 0 51
-xpilot 59 0 53
-xpm 52 0 64
-xpm-devel 10 0 56
-xpp 60 0 50
-xpuzzles 50 0 43
-xrally 5 0 5
-xrn 55 0 49
-xscreensaver 68 0 55
-xscreensaver-gl -1 -1 -1
-xsoldier 51 0 45
-xsysinfo 55 0 56
-xterm 87 0 80
-xtoolwait 50 0 35
-xtraceroute 50 0 40
-xtrojka 51 0 45
-xwc 65 0 40
-xwpe 0 0 20
-xwpe-X11 0 0 20
-xwpick 55 0 49
-xxgdb 53 0 47
-yodl 0 0 0
-yp-tools 0 40 0
-ypbind 0 40 0
-ypserv 0 0 0
-ytalk 21 75 18
-yudit 50 0 38
-zgv 15 0 13
-zip 70 65 87
-zlib 16 60 94
-zlib-devel 10 0 72
-zsh 20 50 72
-zsh-doc 0 35 60
-jpilot 40 0 30
-jpilot-Mail 12 0 10
-jpilot-syncmal 12 0 10
-jpilot-plugin-devel 0 0 0
-Maelstrom 50 0 35
-auctex 5 0 5
-bcast 15 0 10
-mpeg2_movie 10 0 8
-bg5ps -10 -10 -10
-eroaster 55 0 45
-everybuddy 52 0 52
-jabber 0 30 0
-libjabber 0 0 0
-libjabber-devel 0 0 0
-gabber 35 10 20
-gdk-pixbuf-gnomecanvas 0 0 0
-gdk-pixbuf-loaders 0 0 0
-gdk-pixbuf-xlib 0 0 0
-htdig 20 0 15
-libxode 0 0 0
-libxode-devel 0 0 0
-libgnet 0 0 0
-libgnet-devel 0 0 0
-libetherx 0 0 0
-libetherx-devel 0 0 0
-screem 55 0 60
-portsentry 0 15 0
-ttfprint -10 -10 -10
-kde-i18n-Afrikaans -12 -51 -23
-kde-i18n-Basque -12 -51 -23
-kde-i18n-Brazil -12 -51 -23
-kde-i18n-Breton -12 -51 -23
-kde-i18n-British -12 -51 -23
-kde-i18n-Bulgarian -12 -51 -23
-kde-i18n-Catalan -12 -51 -23
-kde-i18n-Chinese -12 -51 -23
-kde-i18n-Chinese-Big5 -12 -51 -23
-kde-i18n-Croatian -12 -51 -23
-kde-i18n-Czech -12 -51 -23
-kde-i18n-Danish -12 -51 -23
-kde-i18n-Dutch -12 -51 -23
-kde-i18n-Esperanto -12 -51 -23
-kde-i18n-Estonian -12 -51 -23
-kde-i18n-Finnish -12 -51 -23
-kde-i18n-French -12 -51 -23
-kde-i18n-Galacian -12 -51 -23
-kde-i18n-German -12 -51 -23
-kde-i18n-Greek -12 -51 -23
-kde-i18n-Hebrew -12 -51 -23
-kde-i18n-Hungarian -12 -51 -23
-kde-i18n-Icelandic -12 -51 -23
-kde-i18n-Italian -12 -51 -23
-kde-i18n-Japanese -12 -51 -23
-kde-i18n-Korean -12 -51 -23
-kde-i18n-Lithuanian -12 -51 -23
-kde-i18n-Macedonian -12 -51 -23
-kde-i18n-Maori -12 -51 -23
-kde-i18n-Norwegian -12 -51 -23
-kde-i18n-Norwegian -12 -51 -23
-kde-i18n-Polish -12 -51 -23
-kde-i18n-Portuguese -12 -51 -23
-kde-i18n-Romanian -12 -51 -23
-kde-i18n-Russian -12 -51 -23
-kde-i18n-Serbian -12 -51 -23
-kde-i18n-Slovak -12 -51 -23
-kde-i18n-Slovenian -12 -51 -23
-kde-i18n-Spanish -12 -51 -23
-kde-i18n-Swedish -12 -51 -23
-kde-i18n-Tamil -12 -51 -23
-kde-i18n-Thai -12 -51 -23
-kde-i18n-Turkish -12 -51 -23
-kde-i18n-Ukrainian -12 -51 -23
-kde-i18n-Walloon -12 -51 -23
-kde-i18n-Welsh -12 -51 -23
-kde-i18n-Norwegian-Nynorsk -12 -51 -23
-linuxconf-lang-cn -35 -60 -35
-linuxconf-lang-cs -35 -60 -35
-linuxconf-lang-de -35 -60 -35
-linuxconf-lang-es -35 -60 -35
-linuxconf-lang-fi -35 -60 -35
-linuxconf-lang-fr -35 -60 -35
-linuxconf-lang-it -35 -60 -35
-linuxconf-lang-ko -35 -60 -35
-linuxconf-lang-no -35 -60 -35
-linuxconf-lang-pt -35 -60 -35
-linuxconf-lang-ro -35 -60 -35
-linuxconf-lang-ru-SU -35 -60 -35
-linuxconf-lang-se -35 -60 -35
-linuxconf-lang-sk -35 -60 -35
-linuxconf-lang-zh -35 -60 -35
-7colors 15 0 0
-ltris 28 0 0
-lbreakout 35 0 0
-fonts-hebrew-elmar -30 -30 -30
-kwintv 0 0 0
-xawtv 0 0 0
-xawtv-misc 0 0 0
-xawtv-radio 0 0 0
-wxxt 0 0 0
-wxxt-devel 0 0 0
-surfraw 0 0 0
-R-base 0 0 0
-gpa 20 0 0
-gnome-telnet 0 0 0
-quanta 32 0 24
-nslint 0 12 0
-logcheck 0 12 0
-kisdn-free 33 0 30
-
-# commercial
-ac3d 20 0 20
-acroread 24 15 24
-acroread-nppdf 24 15 24
-IglooFTP-PRO 20 20 20
-interbase 0 15 15
-interbase-docs 0 15 15
-civctp-demo 22 0 20
-compupic 19 0 19
-commercial-menu 50 40 50
-eus-demo 23 0 20
-myth2-demo 24 0 25
-macromedia-flash 45 15 45
-RealPlayer 27 15 27
-RealPlayer-rpnp 27 15 27
-scol 23 0 23
-avp-database 20 20 20
-avp-linux 20 20 20
-arkeia-arkc 0 20 0
-arkeia-client 20 0 20
-arkeia-gui 24 0 20
-arkeia-server-shareware 0 30 0
-Artstream 20 0 0
-citrix-icaclient-en -70 -70 -70
-citrix-icaclient-fr -70 -70 -70
-citrix-icaclient-ge -70 -70 -70
-citrix-icaclient-sp -70 -70 -70
-printpro 0 0 0
-printpro-agfa 0 0 0
-printpro-alps 0 0 0
-printpro-apple 0 0 0
-printpro-autologic 0 0 0
-printpro-calcomp 0 0 0
-printpro-canon 0 0 0
-printpro-digital 0 0 0
-printpro-efi 0 0 0
-printpro-encad 0 0 0
-printpro-epson 0 0 0
-printpro-hp 0 0 0
-printpro-ibm 0 0 0
-printpro-lexmark 0 0 0
-printpro-lhag 0 0 0
-printpro-linotronic 0 0 0
-printpro-nec 0 0 0
-printpro-oki 0 0 0
-printpro-otheram 0 0 0
-printpro-othernz 0 0 0
-printpro-qms 0 0 0
-printpro-seiko 0 0 0
-printpro-sony 0 0 0
-printpro-tektronix 0 0 0
-printpro-ti 0 0 0
-printpro-varityper 0 0 0
-printpro-xerox 0 0 0
-emumail4.0 0 20 0
-EnlightenDSMFree 0 24 0
-EnlightenDSMFree-dsa 0 24 0
-EnlightenDSMFree-gui 0 24 0
-ForteCE-FCS 0 0 30
-ViaVoice_Outloud_rtk 0 0 45
-ViaVoice_Outloud_sdk 0 0 45
-ViaVoice_runtime 0 0 45
-ViaVoice_sdk 0 0 45
-jdk-sun 0 0 35
-jdk-sun-doc 0 0 35
-jre-sun 20 0 35
-heretic2-demo 24 0 24
-heroes3-demo 24 0 24
-rt2-demo 24 0 24
-MainActor 24 0 0
-mupad 20 0 20
-mtv 24 0 24
-mtv-fullscreen-extension 15 0 15
-NetPartitioner 0 24 0
-omnimark 0 0 35
-rebol-core 0 0 30
-staroffice-de -64 -90 -64
-staroffice-en -64 -90 -64
-staroffice-fr -64 -90 -64
-staroffice-it -64 -90 -64
-staroffice-nl -64 -90 -64
-staroffice-pt -64 -90 -64
-staroffice-es -64 -90 -64
-staroffice-sv -64 -90 -64
-tina-base 0 0 0
-tina-lesstif 0 0 0
-tina-oracle80 0 0 0
-tina-oracle8i 0 0 0
-tina-server 0 0 0
-VMware 20 0 35
-VariCAD 24 0 24
-ViaVoice_runtime 26 0 26
-<<<<<<< compssList
-viavoicemenu 26 0 26
-=======
-viavoicemenu 26 0 26
->>>>>>> 1.139
-kisdn 0 0 0
diff --git a/perl-install/share/compssUsers b/perl-install/share/compssUsers
deleted file mode 100644
index 7becfcfd4..000000000
--- a/perl-install/share/compssUsers
+++ /dev/null
@@ -1,92 +0,0 @@
- # --- Workstation
-
-Office Workstation [icon=office] [path=Workstation] [descr=Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc]
- OFFICE
- PUBLISHING
- PIM
-
-Game station [icon=arcade] [path=Workstation] [descr=Amusement programs: arcade, boards, strategy, etc]
- GAMES
-
-Multimedia station [icon=multimedia] [path=Workstation] [descr=Sound and video playing/editing programs]
- AUDIO
- VIDEO
- GRAPHICS
-
-Internet station [icon=networking] [path=Workstation] [descr=Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web]
- NETWORKING_WWW
- NETWORKING_MAIL
- NETWORKING_NEWS
- COMMUNICATIONS
- NETWORKING_CHAT
- NETWORKING_FILE_TRANSFER
- NETWORKING_IRC
- NETWORKING_INSTANT_MESSAGING
- NETWORKING_DNS
-
-Network Computer (client) [icon=terminals] [path=Workstation] [descr=Clients for different protocols including ssh]
- NETWORKING_REMOTE_ACCESS
- NETWORKING_FILE
-
-Configuration [icon=configuration] [path=Workstation] [descr=Tools to ease the configuration of your computer]
- CONFIG
- WEBMIN
-
-Scientific Workstation [icon=sciences] [path=Workstation] [descr=]
- SCIENCES
-
-Console Tools [icon=terminals] [path=Workstation] [descr=Editors, shells, file tools, terminals]
- EDITORS
- TERMINALS
- TEXT_TOOLS
- SHELLS
- FILE_TOOLS
-
- # --- Graphical Environment
-
-KDE Workstation [icon=kde] [path=Graphical Environment] [descr=The K Desktop Environment, the basic graphical environment with a collection of accompanying tools]
- KDE
- X
-
-Gnome Workstation [icon=gnome] [path=Graphical Environment] [descr=A graphical environment with user-friendly set of applications and desktop tools]
- GNOME
- X
-
-Other Graphical Desktops [icon=windowmanager] [path=Graphical Environment] [descr=Icewm, Window Maker, Enlightenment, Fvwm, etc]
- GRAPHICAL_DESKTOP
- X
-
-
- # --- Development
-
-Development [icon=editors] [path=Development] [descr=C and C++ development libraries, programs and include files]
- DEVELOPMENT
- EDITORS
-
-Documentation [icon=documentation] [path=Development] [descr=Books and Howto's on Linux and Free Software]
- BOOKS
-
- # --- Server
-
-Web/FTP [icon=file_transfer] [path=Server] [descr=Apache, Pro-ftpd]
- NETWORKING_WWW_SERVER
- NETWORKING_FILE_TRANSFER_SERVER
-
-Mail/Groupware/News [icon=mail] [path=Server] [descr=Postfix mail server, Inn news server]
- NETWORKING_MAIL_SERVER
- NETWORKING_NEWS_SERVER
-
-Database [icon=archiving] [path=Server] [descr=PostgreSQL or MySQL database server]
- DATABASES
- DATABASES_SERVER
-
-Firewall/Router [icon=networking] [path=Server] [descr=Internet gateway]
- NETWORKING_FIREWALLING_SERVER
-
-DNS/NIS [icon=hardware] [path=Server] [descr=Domain Name and Network Information Server]
- NIS_SERVER
- NETWORKING_DNS_SERVER
-
-Network Computer server [icon=networking] [path=Server] [descr=NFS server, SMB server, Proxy server, ssh server]
- NETWORKING_FILE_SERVER
- NETWORKING_REMOTE_ACCESS_SERVER
diff --git a/perl-install/share/compssUsers.desktop b/perl-install/share/compssUsers.desktop
deleted file mode 100644
index f836d6731..000000000
--- a/perl-install/share/compssUsers.desktop
+++ /dev/null
@@ -1,39 +0,0 @@
-Office [icon=office] [descr=Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc]
- Office
-
-Internet [icon=networking] [descr=Set of tools for mail, news, web, file transfer, and chat]
- Networking
-
-Games [icon=amusement] [descr=Amusement programs: arcade, boards, strategy, etc]
- Games
-
-Multimedia - Graphics [icon=graphics] [descr=Graphics programs such as The Gimp]
- Graphics
-
-Multimedia - Sound [icon=multimedia] [descr=Audio-related tools: mp3 or midi players, mixers, etc]
- Sound
-
-Multimedia - Video [icon=video] [descr=Video players and editors]
- Video
-
-Multimedia - CD Burning [icon=cd_burning] [descr=Tools to create and burn CD's]
- Archiving/Cd burning
-
-More Graphical Desktops (Gnome, IceWM) [icon=windowmanager] [descr=Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc]
- Graphical desktop/GNOME
- Graphical desktop/Sawmill
- Graphical desktop/Icewm
- +XFree86-75dpi-fonts
- +fonts-ttf-west_european
-
-Personal Information Management [icon=remote_access] [descr=Tools for your Palm Pilot or your Visor]
- +jpilot
- +pilot-link
- +kde-pim
- +gnome-pim
- +gnome-pim-conduits
-
-Personal Finance [icon=sciences] [descr=Programs to manage your finance, such as gnucash]
- +gnucash
- +MoneyDance
-
diff --git a/perl-install/share/compssUsers.server b/perl-install/share/compssUsers.server
deleted file mode 100644
index ac384122e..000000000
--- a/perl-install/share/compssUsers.server
+++ /dev/null
@@ -1,67 +0,0 @@
- # --- Graphical Environment
-
-KDE Workstation [icon=kde] [path=Graphical Environment] [descr=The K Desktop Environment, the basic graphical environment with a collection of accompanying tools]
- KDE
- X
-
-Gnome Workstation [icon=gnome] [path=Graphical Environment] [descr=A graphical environment with user-friendly set of applications and desktop tools]
- GNOME
- X
-
-Other Graphical Desktops [icon=windowmanager] [path=Graphical Environment] [descr=XFce, Window Maker, IceWm]
- GRAPHICAL_DESKTOP
- X
-
- # --- Development
-
-Development [icon=editors] [path=Development] [descr=C and C++ development libraries, programs and include files]
- DEVELOPMENT
-
-Documentation [icon=documentation] [path=Development] [descr=Books and Howto's on Linux and Free Software]
- BOOKS
-
- # --- Server
-
-Web Server [icon=file_transfer] [path=Server] [descr=Apache]
- NETWORKING_WWW_SERVER
-
-Groupware [icon=mail] [path=Server] [descr=PHPgroupware]
- NETWORKING_GROUPWARE_SERVER
-
-Firewall/Router [icon=networking] [path=Server] [descr=Internet gateway]
- NETWORKING_FIREWALLING_SERVER
-
-Mail/News [icon=mail] [path=Server] [descr=Postfix mail server, Inn news server]
- NETWORKING_MAIL_SERVER
- NETWORKING_NEWS_SERVER
-
-Directory Server [icon=mail] [path=Server] [descr=LDAP server]
- NETWORKING_LDAP_SERVER
-
-FTP Server [icon=file_transfer] [path=Server] [descr=Wu-FTPd]
- NETWORKING_FILE_TRANSFER_SERVER
-
-DNS/NIS [icon=hardware] [path=Server] [descr=Domain Name and Network Information Server]
- NIS_SERVER
- NETWORKING_DNS_SERVER
-
-File & Printer Sharing Server [icon=archiving] [path=Server] [descr=NFS server, Samba server]
- NETWORKING_FILE_SERVER
-
-Database [icon=archiving] [path=Server] [descr=PostgreSQL or MySQL database server]
- DATABASES
- DATABASES_SERVER
-
- # --- Utilities
-
-SSH server [icon=networking] [path=Utilities] [descr=ssh server]
- NETWORKING_REMOTE_ACCESS_SERVER
-
-Webmin [icon=archiving] [path=Utilities] [descr=webmin remote configuration server]
- WEBMIN
-
-Network Utilities/Monitoring [icon=archiving] [path=Utilities] [descr=Monitoring tools, processes accounting, tcpdump, nmap, ...]
- MONITORING
-
-MandrakeSoft Wizards [icon=archiving] [path=Utilities] [descr=Wizards to configure servers]
- WIZARDS
diff --git a/perl-install/share/consolefonts/Cyr_a8x16 b/perl-install/share/consolefonts/Cyr_a8x16
deleted file mode 100644
index a09ac03d8..000000000
--- a/perl-install/share/consolefonts/Cyr_a8x16
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/consolefonts/lat0-sun16 b/perl-install/share/consolefonts/lat0-sun16
deleted file mode 100644
index 19e3d432e..000000000
--- a/perl-install/share/consolefonts/lat0-sun16
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/consolefonts/lat2-sun16 b/perl-install/share/consolefonts/lat2-sun16
deleted file mode 100644
index 509e5def2..000000000
--- a/perl-install/share/consolefonts/lat2-sun16
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/consolefonts/ruscii_8x16 b/perl-install/share/consolefonts/ruscii_8x16
deleted file mode 100644
index b0513a9db..000000000
--- a/perl-install/share/consolefonts/ruscii_8x16
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/diskdrake.rc b/perl-install/share/diskdrake.rc
deleted file mode 100644
index 317fc2684..000000000
--- a/perl-install/share/diskdrake.rc
+++ /dev/null
@@ -1,43 +0,0 @@
-style "font"
-{
- fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-1,*-r-*"
-}
-
-style "red" = "font"
-{
- bg[NORMAL] = { 1.0, 0, 0 }
- bg[PRELIGHT] = { 0.9, 0, 0 }
-}
-style "darkred" = "font"
-{
- bg[NORMAL] = { 0.7, 0, 0 }
- bg[PRELIGHT] = { 0.6, 0, 0 }
-}
-style "green" = "font"
-{
- bg[NORMAL] = { 0, 1.0, 0 }
- bg[PRELIGHT] = { 0, 0.9, 0 }
- fg[NORMAL] = { 0, 0, 0 }
-}
-style "blue" = "font"
-{
- bg[NORMAL] = { 0, 0, 1.0 }
- bg[PRELIGHT] = { 0, 0, 0.9 }
-}
-style "white" = "font"
-{
- bg[NORMAL] = { 1.0, 1.0, 1.0 }
- bg[PRELIGHT] = { 0.67, 0.67, 0.67 }
- fg[NORMAL] = { 0, 0, 0 }
-}
-
-widget "*Linux*" style "red"
-widget "*Ext2*" style "red"
-widget "*Journalised FS*" style "darkred"
-widget "*Linux swap*" style "green"
-widget "*Swap*" style "green"
-widget "*FAT*" style "blue"
-widget "*SunOS*" style "blue"
-widget "*NT NTFS*" style "blue"
-widget "*Empty*" style "white"
-widget "*Other*" style "font"
diff --git a/perl-install/share/floppy.png b/perl-install/share/floppy.png
deleted file mode 100644
index 2265e6ec6..000000000
--- a/perl-install/share/floppy.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/fonts.tar.bz2 b/perl-install/share/fonts.tar.bz2
deleted file mode 100644
index a663faa8f..000000000
--- a/perl-install/share/fonts.tar.bz2
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/ftin.png b/perl-install/share/ftin.png
deleted file mode 100644
index 3cec3c194..000000000
--- a/perl-install/share/ftin.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/ftout.png b/perl-install/share/ftout.png
deleted file mode 100644
index d821716eb..000000000
--- a/perl-install/share/ftout.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/gen_locales.sh b/perl-install/share/gen_locales.sh
deleted file mode 100755
index 249db5c1a..000000000
--- a/perl-install/share/gen_locales.sh
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/sh
-
-rm -rf .tmp ; mkdir .tmp ; cd .tmp
-tar xfj ../locales-skeleton.tar.bz2
-
-# locale utf-8
-for i in LC_ADDRESS LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_MESSAGES/SYS_LC_MESSAGES ; do
- cp -f /usr/share/locale/UTF-8/$i usr/share/locale/UTF-8/$i
-done
-
-# lc_ctype for common encoding
-for i in CP1251 ISO-8859-13 ISO-8859-14 ISO-8859-15 ISO-8859-2 ISO-8859-3 ISO-8859-7 ISO-8859-9 ISO-8859-9E ; do
- f=usr/share/locale/$i/LC_CTYPE
- [ -e /$f ] || { echo missing /$f ; exit 1 ; }
- cp -f /$f $f
-done
-
-rm -rf .tmp2 ; mkdir .tmp2 ; cd .tmp2
-for i in hy ja ko th vi ; do
- ii=locales-`echo $i | sed 's/\(..\).*/\1/'`
- rpm2cpio /RPMS/$ii-*.rpm | cpio -id --quiet
- f=usr/share/locale/$i/LC_CTYPE
- [ -e $f ] || { echo missing $f in package $ii ; exit 1 ; }
- cp -f $f ../$f
- rm -rf *
-done
-cd .. ; rm -rf .tmp2
-
-# special case for chineese (why is it needed?)
-rm -rf .tmp2 ; mkdir .tmp2 ; cd .tmp2
-for i in zh_CN.GB2312 zh_TW.Big5 ; do
- ii=locales-`echo $i | sed 's/\(..\).*/\1/'`
- rpm2cpio /RPMS/$ii-*.rpm | cpio -id --quiet
- for f in LC_ADDRESS LC_COLLATE LC_CTYPE LC_IDENTIFICATION LC_MEASUREMENT LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE LC_TIME LC_MESSAGES/SYS_LC_MESSAGES ; do
- f=usr/share/locale/$i/$f
- [ -e $f ] || { echo missing $f in package $ii ; exit 1 ; }
- cp -f $f ../$f
- done
- rm -rf *
-done
-cd .. ; rm -rf .tmp2
-
-for i in common C armscii-8 en_US.UTF-8 iso8859-1 iso8859-13 iso8859-14 iso8859-15 iso8859-2 iso8859-3 iso8859-5 iso8859-7 iso8859-9 iso8859-9e ja ko koi8-r koi8-u microsoft-cp1251 microsoft-cp1255 microsoft-cp1256 th_TH vi_VN.tcvn zh_CN zh_TW.big5 ; do
- cp -a /usr/X11R6/lib/X11/locale/$i usr/X11R6/lib/X11/locale
-done
-
-tar cfj ../locales.tar.bz2 usr
-
-cd .. ; rm -rf .tmp
diff --git a/perl-install/share/help.png b/perl-install/share/help.png
deleted file mode 100644
index ddebe33ad..000000000
--- a/perl-install/share/help.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/install.rc b/perl-install/share/install.rc
deleted file mode 100644
index b86a22c29..000000000
--- a/perl-install/share/install.rc
+++ /dev/null
@@ -1,21 +0,0 @@
-style "default-font"
-{
- fontset = "-*-*-medium-r-normal-*-12-*-*-*-*-*-iso8859-15"
-}
-
-style "small-font"
-{
- fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-15"
-}
-
-style "logo" = "background"
-{
- # no background image
- engine "pixmap" { image { function = FLAT_BOX } }
-}
-
-widget "*" style "default-font"
-widget "Steps" style "steps"
-widget "*Steps*" style "small-font"
-widget "*logo*" style "logo"
-
diff --git a/perl-install/share/keyboards.tar.bz2 b/perl-install/share/keyboards.tar.bz2
deleted file mode 100644
index 62939096c..000000000
--- a/perl-install/share/keyboards.tar.bz2
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/keymaps.tar.bz2 b/perl-install/share/keymaps.tar.bz2
deleted file mode 100644
index 8ca03c137..000000000
--- a/perl-install/share/keymaps.tar.bz2
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/keymaps_generate b/perl-install/share/keymaps_generate
deleted file mode 100755
index 0265502c9..000000000
--- a/perl-install/share/keymaps_generate
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use keyboard;
-
-my $dir = "keymaps/usr/share/keymaps";
-system("rm -rf keymaps ; mkdir -p keymaps/usr/share/keymaps");
-
-foreach (keyboard::keyboards()) {
- my $kmap = keyboard::keyboard2kmap($_);
- if (system("./kmap2bkmap $kmap > $dir/$kmap.bkmap 2>/dev/null") != 0) {
- warn "unknown kmap $kmap\n";
- unlink "$dir/$kmap.bkmap";
- }
-}
-
-system("tar cfj keymaps.tar.bz2 -C keymaps usr") == 0 or die;
-system("rm -rf keymaps");
diff --git a/perl-install/share/kmap2bkmap b/perl-install/share/kmap2bkmap
deleted file mode 100755
index 3aff35c3e..000000000
--- a/perl-install/share/kmap2bkmap
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use c;
-
-my $KMAP_MAGIC = 0x8B39C07F;
-
-BEGIN { @ARGV == 1 or die "usage: kmap2bkmap <keymap>\n" }
-
-system("sudo loadkeys $ARGV[0]") == 0 or die;
-open F, "dumpkeys -n -f |";
-<F> =~ /^keymaps\s+(.*)/ or die;
-foreach (split ',', $1) {
- my @l = /(\d+)-(\d+)/;
- my ($i, $j) = @l ? @l : ($_,$_);
- $keymaps[$_] = 1 foreach $i .. $j;
-}
-
-print pack("I", $KMAP_MAGIC);
-print map { pack "i", $keymaps[$_] || 0 } 0 .. c::MAX_NR_KEYMAPS()-1;
-
-foreach (<F>) {
- s/\+0x/0x/g;
- my ($keycode, $key, undef, @l) = split;
- $keycode eq 'keycode' or next;
- my $i = 0;
- $L[$i++][$key] = hex $_ foreach @l;
-}
-close F or die "dumpkeys failed";
-
-foreach (@L) {
- foreach my $i (0 .. c::NR_KEYS()-1) {
- print pack "s", defined $_->[$i] ? $_->[$i] : 0x200;
- }
-}
-
-exit 0;
diff --git a/perl-install/share/list b/perl-install/share/list
deleted file mode 100644
index 4f5ecc6c2..000000000
--- a/perl-install/share/list
+++ /dev/null
@@ -1,173 +0,0 @@
-/bin/ash
-/bin/consolechars
-/bin/cpio
-/bin/gzip
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/etc/imrc
-/etc/im_palette.pal
-/sbin/badblocks
-/sbin/e2fsck
-/sbin/tune2fs
-/sbin/fdisk
-/sbin/insmod
-/sbin/losetup
-/sbin/mke2fs
-/sbin/modinfo
-/sbin/resize2fs
-/sbin/dumpe2fs
-/sbin/modinfo
-/usr/X11R6/lib/modules/xf86Wacom.so
-/usr/bin/bzip2
-/usr/bin/fb2png
-/usr/bin/packdrake
-/usr/bin/parsehdlist
-/usr/bin/perl
-/usr/lib/gconv/BIG5.so
-/usr/lib/gconv/EUC-JP.so
-/usr/lib/gconv/libGB.so
-/usr/lib/gconv/libJIS.so
-/usr/lib/gconv/libKSC.so
-/usr/lib/gconv/EUC-KR.so
-/usr/lib/gconv/ISO8859-15.so
-/usr/lib/gconv/ISO8859-14.so
-/usr/lib/gconv/ISO8859-13.so
-/usr/lib/gconv/ISO8859-9E.so
-/usr/lib/gconv/ISO8859-9.so
-/usr/lib/gconv/ISO8859-7.so
-/usr/lib/gconv/ISO8859-5.so
-/usr/lib/gconv/ISO8859-3.so
-/usr/lib/gconv/ISO8859-2.so
-/usr/lib/gconv/ISO8859-1.so
-/usr/lib/gconv/KOI8-K.so
-/usr/lib/gconv/KOI8-U.so
-/usr/lib/gconv/KOI8-R.so
-/usr/lib/gconv/TIS-620.so
-/usr/lib/gconv/CP1251.so
-/usr/lib/gconv/GEORGIAN-PS.so
-/usr/lib/gconv/EUC-CN.so
-/usr/lib/gconv/gconv-modules
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/PERL_VERSION/AutoLoader.pm
-/usr/lib/perl5/PERL_VERSION/Carp.pm
-/usr/lib/perl5/PERL_VERSION/Carp/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/Exporter.pm
-/usr/lib/perl5/PERL_VERSION/Exporter/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/FileHandle.pm
-/usr/lib/perl5/PERL_VERSION/SelectSaver.pm
-/usr/lib/perl5/PERL_VERSION/SelfLoader.pm
-/usr/lib/perl5/PERL_VERSION/Symbol.pm
-/usr/lib/perl5/PERL_VERSION/Time/Local.pm
-/usr/lib/perl5/PERL_VERSION/IO/Socket/INET.pm
-/usr/lib/perl5/PERL_VERSION/IO/Socket/UNIX.pm
-/usr/lib/perl5/PERL_VERSION/dumpvar.pl
-/usr/lib/perl5/PERL_VERSION/warnings.pm
-/usr/lib/perl5/PERL_VERSION/warnings/register.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/File/Glob.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/File/Glob/Glob.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Config.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Data/Dumper.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/DynaLoader.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Errno.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Fcntl.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/XSLoader.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/File.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Handle.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Seekable.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Select.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/IO/Socket.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/Socket.pm
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/_h2ph_pre.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/asm/unistd.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/IO/IO.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/Socket/Socket.so
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/bits/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/sys/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/syscall.ph
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/auto/DynaLoader/dl_findfile.al
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/lib.pm
-/usr/lib/perl5/PERL_VERSION/bytes.pm
-/usr/lib/perl5/PERL_VERSION/integer.pm
-/usr/lib/perl5/PERL_VERSION/overload.pm
-/usr/lib/perl5/PERL_VERSION/strict.pm
-/usr/lib/perl5/PERL_VERSION/vars.pm
-/usr/lib/perl5/PERL_VERSION/Net/Cmd.pm
-/usr/lib/perl5/PERL_VERSION/Net/Config.pm
-/usr/lib/perl5/PERL_VERSION/Net/FTP.pm
-/usr/lib/perl5/PERL_VERSION/Net/FTP/A.pm
-/usr/lib/perl5/PERL_VERSION/Net/FTP/I.pm
-/usr/lib/perl5/PERL_VERSION/Net/FTP/dataconn.pm
-/usr/lib/perl5/PERL_VERSION/Net/Netrc.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/MDK/Common/DataStructure.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/MDK/Common/File.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/MDK/Common/Func.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/MDK/Common/Globals.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/MDK/Common/Math.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/MDK/Common/String.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/MDK/Common/System.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/MDK/Common/Various.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/MDK/Common.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/ARCH-linux/URPM.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/ARCH-linux/URPM/Resolve.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/ARCH-linux/auto/URPM/URPM.so
-/usr/lib/perl5/vendor_perl/PERL_VERSION/ARCH-linux/packdrake.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/ARCH-linux/Gtk.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/ARCH-linux/Gtk/Types.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/ARCH-linux/Gtk/Gdk/ImlibImage.pm
-/usr/lib/perl5/vendor_perl/PERL_VERSION/ARCH-linux/auto/Gtk/Gtk.so
-/usr/lib/perl5/vendor_perl/PERL_VERSION/ARCH-linux/auto/Gtk/Gdk/ImlibImage/ImlibImage.so
-/usr/lib/rpm/rpmrc
-/usr/lib/rpm/macros
-/sbin/rescuept
-/usr/share/icons/amusement_section.png
-/usr/share/icons/arcade_section.png
-/usr/share/icons/cd_burning_section.png
-/usr/share/icons/chat_section.png
-/usr/share/icons/default_section.png
-/usr/share/icons/documentation_section.png
-/usr/share/icons/gnome.xpm
-/usr/share/icons/graphics_section.png
-/usr/share/icons/kde.xpm
-/usr/share/icons/multimedia_section.png
-/usr/share/icons/development_section.png
-/usr/share/icons/networking_section.png
-/usr/share/icons/mail_section.png
-/usr/share/icons/archiving_section.png
-/usr/share/icons/hardware_section.png
-/usr/share/icons/file_transfer_section.png
-/usr/share/icons/office_section.png
-/usr/share/icons/remote_access_section.png
-/usr/share/icons/sciences_section.png
-/usr/share/icons/video_section.png
-/usr/share/icons/windowmanager_section.png
-/usr/share/icons/editors_section.png
-/usr/share/icons/terminals_section.png
-/usr/share/icons/configuration_section.png
-/usr/share/ldetect-lst/Cards+
-/usr/share/ldetect-lst/CardsNames
-/usr/share/ldetect-lst/MonitorsDB
-/usr/share/ldetect-lst/isdn.db
-/usr/share/ldetect-lst/pcitable
-/usr/share/ldetect-lst/usbtable
-
-/sbin/pvcreate
-/sbin/pvdisplay
-/sbin/vgchange
-/sbin/vgcreate
-/sbin/vgdisplay
-/sbin/vgextend
-/sbin/vgremove
-/sbin/vgscan
-/sbin/lvcreate
-/sbin/lvdisplay
-/sbin/lvextend
-/sbin/lvreduce
-/sbin/lvremove
diff --git a/perl-install/share/list.alpha b/perl-install/share/list.alpha
deleted file mode 100644
index 7ce1a1fee..000000000
--- a/perl-install/share/list.alpha
+++ /dev/null
@@ -1,13 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/raidstart
-/sbin/ifport
-/sbin/mkdosfs
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_VGA16
-/usr/X11R6/bin/XF86_3DLabs
-/usr/X11R6/bin/XF86_SVGA
-/usr/X11R6/bin/XF86_TGA
-/usr/X11R6/bin/XF86_S3
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/list.i386 b/perl-install/share/list.i386
deleted file mode 100644
index d7735f29c..000000000
--- a/perl-install/share/list.i386
+++ /dev/null
@@ -1,11 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/mkfs.jfs
-/sbin/mkfs.xfs
-/sbin/raidstart
-/sbin/ifport
-/sbin/mkdosfs
-/sbin/resize_reiserfs
-/usr/X11R6/bin/XF86_FBDev
-/usr/X11R6/bin/XF86_VGA16
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/list.ia64 b/perl-install/share/list.ia64
deleted file mode 100644
index 9bbf999cb..000000000
--- a/perl-install/share/list.ia64
+++ /dev/null
@@ -1,119 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/mkfs.xfs
-/sbin/raidstart
-/sbin/mkdosfs
-/sbin/resize_reiserfs
-/usr/bin/strace
-/var/log/XFree86.0.log
-/usr/X11R6/bin/XFree86
-/usr/X11R6/bin/xmodmap
-/usr/X11R6/lib/modules/
-/usr/X11R6/lib/modules/codeconv
-/usr/X11R6/lib/modules/codeconv/libARABIC.a
-/usr/X11R6/lib/modules/codeconv/libARMSCII8.a
-/usr/X11R6/lib/modules/codeconv/libBIG5.a
-/usr/X11R6/lib/modules/codeconv/libDOSENCODING.a
-/usr/X11R6/lib/modules/codeconv/libGB2312.a
-/usr/X11R6/lib/modules/codeconv/libGEORGIAN.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_1.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_10.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_11.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_14.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_15.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_2.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_3.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_4.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_5.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_6.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_7.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_8.a
-/usr/X11R6/lib/modules/codeconv/libISO8859_9.a
-/usr/X11R6/lib/modules/codeconv/libJISX0201.a
-/usr/X11R6/lib/modules/codeconv/libJISX0208.a
-/usr/X11R6/lib/modules/codeconv/libJISX0212.a
-/usr/X11R6/lib/modules/codeconv/libKOI8.a
-/usr/X11R6/lib/modules/codeconv/libKSC5601.a
-/usr/X11R6/lib/modules/codeconv/libKSCJOHAB.a
-/usr/X11R6/lib/modules/codeconv/libMULEENCODING.a
-/usr/X11R6/lib/modules/codeconv/libTCVN.a
-/usr/X11R6/lib/modules/codeconv/libVISCII.a
-/usr/X11R6/lib/modules/dri
-/usr/X11R6/lib/modules/dri/gamma_dri.so
-/usr/X11R6/lib/modules/dri/i810_dri.so
-/usr/X11R6/lib/modules/dri/mga_dri.so
-/usr/X11R6/lib/modules/dri/r128_dri.so
-/usr/X11R6/lib/modules/dri/sis_dri.so
-/usr/X11R6/lib/modules/drivers
-/usr/X11R6/lib/modules/drivers/ati_drv.o
-/usr/X11R6/lib/modules/drivers/atimisc_drv.o
-/usr/X11R6/lib/modules/drivers/fbdev_drv.o
-/usr/X11R6/lib/modules/drivers/glint_drv.o
-/usr/X11R6/lib/modules/drivers/i740_drv.o
-/usr/X11R6/lib/modules/drivers/linux
-/usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
-/usr/X11R6/lib/modules/drivers/mga_drv.o
-/usr/X11R6/lib/modules/drivers/nv_drv.o
-/usr/X11R6/lib/modules/drivers/r128_drv.o
-/usr/X11R6/lib/modules/drivers/radeon_drv.o
-/usr/X11R6/lib/modules/drivers/rendition_drv.o
-/usr/X11R6/lib/modules/drivers/s3virge_drv.o
-/usr/X11R6/lib/modules/drivers/sis_drv.o
-/usr/X11R6/lib/modules/drivers/tdfx_drv.o
-/usr/X11R6/lib/modules/drivers/vga_drv.o
-/usr/X11R6/lib/modules/extensions
-/usr/X11R6/lib/modules/extensions/libGLcore.a
-/usr/X11R6/lib/modules/extensions/libdbe.a
-/usr/X11R6/lib/modules/extensions/libdri.a
-/usr/X11R6/lib/modules/extensions/libextmod.a
-/usr/X11R6/lib/modules/extensions/libglx.a
-/usr/X11R6/lib/modules/extensions/librecord.a
-/usr/X11R6/lib/modules/extensions/libxie.a
-/usr/X11R6/lib/modules/fonts
-/usr/X11R6/lib/modules/fonts/libbitmap.a
-/usr/X11R6/lib/modules/fonts/libfreetype.a
-/usr/X11R6/lib/modules/fonts/libspeedo.a
-/usr/X11R6/lib/modules/fonts/libtype1.a
-/usr/X11R6/lib/modules/fonts/libxtt.a
-/usr/X11R6/lib/modules/input
-/usr/X11R6/lib/modules/input/citron_drv.o
-/usr/X11R6/lib/modules/input/digitaledge_drv.o
-/usr/X11R6/lib/modules/input/dynapro_drv.o
-/usr/X11R6/lib/modules/input/elographics_drv.o
-/usr/X11R6/lib/modules/input/microtouch_drv.o
-/usr/X11R6/lib/modules/input/mouse_drv.o
-/usr/X11R6/lib/modules/input/mutouch_drv.o
-/usr/X11R6/lib/modules/input/spaceorb_drv.o
-/usr/X11R6/lib/modules/input/summa_drv.o
-/usr/X11R6/lib/modules/input/void_drv.o
-/usr/X11R6/lib/modules/input/wacom_drv.o
-/usr/X11R6/lib/modules/libafb.a
-/usr/X11R6/lib/modules/libcfb.a
-/usr/X11R6/lib/modules/libcfb16.a
-/usr/X11R6/lib/modules/libcfb24.a
-/usr/X11R6/lib/modules/libcfb32.a
-/usr/X11R6/lib/modules/libddc.a
-/usr/X11R6/lib/modules/libfb.a
-/usr/X11R6/lib/modules/libi2c.a
-/usr/X11R6/lib/modules/libint10.a
-/usr/X11R6/lib/modules/libmfb.a
-/usr/X11R6/lib/modules/libpcidata.a
-/usr/X11R6/lib/modules/librac.a
-/usr/X11R6/lib/modules/libramdac.a
-/usr/X11R6/lib/modules/libscanpci.a
-/usr/X11R6/lib/modules/libshadow.a
-/usr/X11R6/lib/modules/libshadowfb.a
-/usr/X11R6/lib/modules/libvbe.a
-/usr/X11R6/lib/modules/libvgahw.a
-/usr/X11R6/lib/modules/libxaa.a
-/usr/X11R6/lib/modules/libxf1bpp.a
-/usr/X11R6/lib/modules/libxf24_32bpp.a
-/usr/X11R6/lib/modules/libxf4bpp.a
-/usr/X11R6/lib/modules/libxf8_16bpp.a
-/usr/X11R6/lib/modules/libxf8_32bpp.a
-/usr/X11R6/lib/modules/linux
-/usr/X11R6/lib/modules/linux/libdrm.a
-/usr/X11R6/lib/modules/linux/libfbdevhw.a
-/usr/X11R6/lib/modules/v10002d.uc
-/usr/X11R6/lib/modules/v20002d.uc
-/usr/lib/perl5/PERL_VERSION/ARCH-linux/asm/break.ph
diff --git a/perl-install/share/list.ppc b/perl-install/share/list.ppc
deleted file mode 100644
index 332c97dc2..000000000
--- a/perl-install/share/list.ppc
+++ /dev/null
@@ -1,15 +0,0 @@
-/sbin/mkraid
-/sbin/mkreiserfs
-/sbin/raidstart
-/usr/bin/hformat
-/usr/bin/hmount
-/usr/bin/humount
-/usr/bin/hattrib
-/usr/bin/hcopy
-/usr/bin/hcd
-/sbin/pdisk
-/usr/X11R6/bin/Xpmac
-/usr/X11R6/bin/xmodmap
-/sbin/mkfs.xfs
-/sbin/mkfs.jfs
-
diff --git a/perl-install/share/list.sparc b/perl-install/share/list.sparc
deleted file mode 100644
index b597a10ce..000000000
--- a/perl-install/share/list.sparc
+++ /dev/null
@@ -1,84 +0,0 @@
-/bin/cpio
-/lib/libnss_nis.so.2
-/lib/libnss_files.so.2
-/lib/libnss_dns.so.2
-/lib/libresolv.so.2
-/etc/protocols
-/sbin/mkreiserfs
-/sbin/fdisk
-/sbin/ifport
-/sbin/insmod
-/sbin/mkraid
-/sbin/rmmod
-/sbin/mkdosfs
-/sbin/mke2fs
-/sbin/raidstart
-/sbin/losetup
-/usr/bin/genromfs
-/usr/bin/bzip2
-/usr/bin/perl
-/usr/lib/libimlib-png.so
-/usr/lib/gtk/themes/engines/libpixmap.so
-/usr/lib/gtk/themes/engines/libpixmap.la
-/usr/lib/libimlib-png.so
-/usr/lib/perl5/PERL_VERSION/AutoLoader.pm
-/usr/lib/perl5/PERL_VERSION/Carp.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Data/Dumper.pm
-/usr/lib/perl5/PERL_VERSION/Exporter.pm
-/usr/lib/perl5/PERL_VERSION/Carp/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/Exporter/Heavy.pm
-/usr/lib/perl5/PERL_VERSION/FileHandle.pm
-/usr/lib/perl5/PERL_VERSION/SelectSaver.pm
-/usr/lib/perl5/PERL_VERSION/SelfLoader.pm
-/usr/lib/perl5/PERL_VERSION/Symbol.pm
-/usr/lib/perl5/PERL_VERSION/Time/Local.pm
-/usr/lib/perl5/PERL_VERSION/dumpvar.pl
-/usr/lib/perl5/PERL_VERSION/warnings.pm
-/usr/lib/perl5/PERL_VERSION/warnings/register.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/File/Glob.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/File/Glob/Glob.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/File/Glob/Glob.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Config.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/XSLoader.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/DynaLoader.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Fcntl.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Fcntl/Fcntl.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Fcntl/Fcntl.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/File.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Handle.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Seekable.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/IO/Socket.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/Socket.pm
-/usr/lib/perl5/PERL_VERSION/sparc-linux/_h2ph_pre.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm-sparc/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/asm-sparc64/unistd.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Data/Dumper/Dumper.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Data/Dumper/Dumper.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/IO/IO.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Socket/Socket.bs
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/Socket/Socket.so
-/usr/lib/perl5/PERL_VERSION/sparc-linux/bits/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/sys/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/syscall.ph
-/usr/lib/perl5/PERL_VERSION/sparc-linux/auto/DynaLoader/dl_findfile.al
-/usr/lib/perl5/PERL_VERSION/lib.pm
-/usr/lib/perl5/PERL_VERSION/overload.pm
-/usr/lib/perl5/PERL_VERSION/strict.pm
-/usr/lib/perl5/PERL_VERSION/vars.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Gtk.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Gtk/Types.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Cmd.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Config.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/A.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/I.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/FTP/dataconn.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/Net/Netrc.pm
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/auto/Gtk/Gtk.bs
-/usr/lib/perl5/site_perl/PERL_VERSION/sparc-linux/auto/Gtk/Gtk.so
-/usr/lib/rpm/rpmrc
-/usr/X11R6/bin/Xsun24
-/usr/X11R6/bin/XF86_Mach64
-/usr/X11R6/bin/XF86_3DLabs
-/usr/X11R6/bin/xmodmap
diff --git a/perl-install/share/locales-skeleton.tar.bz2 b/perl-install/share/locales-skeleton.tar.bz2
deleted file mode 100644
index 113f3300a..000000000
--- a/perl-install/share/locales-skeleton.tar.bz2
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/logo-mandrake.png b/perl-install/share/logo-mandrake.png
deleted file mode 100644
index 5b754bef3..000000000
--- a/perl-install/share/logo-mandrake.png
+++ /dev/null
Binary files differ
diff --git a/perl-install/share/makedev.sh b/perl-install/share/makedev.sh
deleted file mode 100755
index e9dccaff2..000000000
--- a/perl-install/share/makedev.sh
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/sh
-#
-# $Id$
-#
-# This script creates all ISDN devices under /dev .
-# Many/most distributions don't include these devices.
-
-echo -e "Creating device inodes ... \c"
-
-if [ $# = 1 ] ; then
- DEV=$1/dev
-else
- DEV=/dev
-fi
-
-MAJ=45
-MIN=0
-rm -f $DEV/isdnctrl* $DEV/ippp*
-while [ $MIN -lt 64 ] ; do
- mknod -m 600 $DEV/isdn$MIN c $MAJ $MIN
- mknod -m 660 $DEV/isdnctrl$MIN c $MAJ `expr $MIN + 64`
- mknod -m 600 $DEV/ippp$MIN c $MAJ `expr $MIN + 128`
- MIN=`expr $MIN + 1`
-done
-if grep '^pppusers:' /etc/group > /dev/null
-then # RH 5 standard
- chgrp pppusers $DEV/isdnctrl* $DEV/ippp*
-elif grep '^dialout:' /etc/group > /dev/null
-then # Debian/SuSE standard
- chgrp dialout $DEV/isdnctrl* $DEV/ippp*
-fi
-rm -f $DEV/isdninfo
-mknod -m 444 $DEV/isdninfo c $MAJ 255
-ln -sf $DEV/isdnctrl0 $DEV/isdnctrl
-
-MAJ=43
-MIN=0
-rm -f $DEV/ttyI*
-while [ $MIN -lt 64 ] ; do
- mknod -m 666 $DEV/ttyI$MIN c $MAJ $MIN
- MIN=`expr $MIN + 1`
-done
-
-MAJ=44
-MIN=0
-rm -f $DEV/cui*
-while [ $MIN -lt 64 ] ; do
- mknod -m 666 $DEV/cui$MIN c $MAJ $MIN
- MIN=`expr $MIN + 1`
-done
-
-if grep '^dialout:' /etc/group > /dev/null
-then # Debian/SuSE standard
- chgrp dialout $DEV/ttyI* $DEV/cui*
-fi
-
-MAJ=68
-MIN=0
-rm -f $DEV/capi20*
-mknod -m 666 $DEV/capi20 c $MAJ 0
-mknod -m 666 $DEV/capi20.00 c $MAJ 1
-mknod -m 666 $DEV/capi20.01 c $MAJ 2
-mknod -m 666 $DEV/capi20.02 c $MAJ 3
-mknod -m 666 $DEV/capi20.03 c $MAJ 4
-mknod -m 666 $DEV/capi20.04 c $MAJ 5
-mknod -m 666 $DEV/capi20.05 c $MAJ 6
-mknod -m 666 $DEV/capi20.06 c $MAJ 7
-mknod -m 666 $DEV/capi20.07 c $MAJ 8
-mknod -m 666 $DEV/capi20.08 c $MAJ 9
-mknod -m 666 $DEV/capi20.09 c $MAJ 10
-mknod -m 666 $DEV/capi20.10 c $MAJ 11
-mknod -m 666 $DEV/capi20.11 c $MAJ 12
-mknod -m 666 $DEV/capi20.12 c $MAJ 13
-mknod -m 666 $DEV/capi20.13 c $MAJ 14
-mknod -m 666 $DEV/capi20.14 c $MAJ 15
-mknod -m 666 $DEV/capi20.15 c $MAJ 16
-mknod -m 666 $DEV/capi20.16 c $MAJ 17
-mknod -m 666 $DEV/capi20.17 c $MAJ 18
-mknod -m 666 $DEV/capi20.18 c $MAJ 19
-mknod -m 666 $DEV/capi20.19 c $MAJ 20
-
-if grep '^dialout:' /etc/group > /dev/null
-then # Debian/SuSE standard
- chgrp dialout $DEV/capi20 $DEV/capi20.??
-fi
-rm -f $DEV/isdnctrl
-ln -s $DEV/isdnctrl1 $DEV/isdnctrl
-
-echo "done."
diff --git a/perl-install/share/po/Changelog b/perl-install/share/po/Changelog
deleted file mode 100644
index fcb677e9a..000000000
--- a/perl-install/share/po/Changelog
+++ /dev/null
@@ -1,249 +0,0 @@
-2002-05-14 Arkadiusz Lipiec <alipiec@elka.pw.edu.pl>
- * pl.po: finished translation and corrected many entries
-
-2001-03-14 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * i18n_compssUsers: improved the script to not include path=
- lines
-
-2000-10-03 Guillaume Cottenceau <gc@mandrakesoft.com>
-
- * fr.po: fixed bug #518 and fixed other misc errors
-
-2000-09-16 Pixel <pixel@mandrakesoft.com>
- * de.po: fix translation of "Size: %d KB\n" (was MB instead of KB)
-
-2000-04-28 Stefan Siegel <siegel@linux-mandrake.com>
- * de.po: Update German File
-
-2000-04-18 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * cy.po: There is now a Welsh file, Thanks Dafydd !
- * da.po: Updated Danish file
-
-2000-04-04 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * lv.po: Added Latvian file; now we are the very first to have
- Latvian language :)
-
-2000-03-26 Pablo Saratxaga <pablo@mandrakesoft.com>
-
- * sk.po: Slovakian translation is now mantained and updated
-
-2000-01-10 Pixel <pixel@mandrakesoft.com>
-
- * po/Changelog: remove the paragraph which was removed from
- help.pm in br.po cs.po el.po et.po gl.po ro.po ru.po tr.po
-
-2000-01-06 François PONS <fpons@mandrakesoft.com>
- * it.po: updated by Maurizio.
-
-2000-01-06 David BAUDENS <baudens@mandrakesoft.com>
- * fr.po: updated
-
-2000-01-05 Pixel <pixel@mandrakesoft.com>
- * *.po: changed the crypto message (french address in usa, and
- removed a paragraph)
-
-2000-01-03 Pablo Saratxaga <pablo@mandrakesoft.com>
- * *.po: merged some strigns from gnorpm to help transaltiosn fo
- rpmdrake new strings
-
-2000-01-03 Pablo Saratxaga <pablo@mandrakesoft.com>
- * no.po: updated Norwegian file
- * id.po: updated Indonesian file
- * hr.po: updated Croatian file
- * da.po: updated Danish file
- * et.po: updated Estonian file
-
-2000-01-01 Pablo Saratxaga <pablo@mandrakesoft.com>
- Happy New Year to all !
- * es.po: completed Spanish file
- * zh_CN.po: created a GB2312 version by converting the Big5 one
- however a real mantainer for a GB2312 version is still wanted
- * ca.po: the first one to be updated after Y2K :)
-
-1999-12-30 Pablo Saratxaga <pablo@mandrakesoft.com>
- * zh_TW.Big5.po: uddated chinese file
- * it.po: updated the Italian file
- * es.po: completed spanish file
- * br.po: updated Britton file
- * ja.po: updated Japanese file
-
-1999-12-29 Pablo Saratxaga <pablo@mandrakesoft.com>
- * no.po: completed Norwegian file
- * eo.po: Completed esperanto file
- * sv.po: updated Swedish file
- * hu.po: compelted Hungarian file
-
-1999-12-27 Pablo Saratxaga <pablo@mandrakesoft.com>
- * ru.po: updated Russian file
- * id.po: completed Indonesian file
- * et.po: Estonian files fixes
- * no.po: completed file
- * et.po: completed file
- * lt.po: updated Lithuanian file
- * da.po: completed Danish file
- * ja.po: updated Japanese file
-
-1999-12-24 Pablo Saratxaga <pablo@mandrakesoft.com>
- * lt.po: updated Lithuanian file
- * *.po: new strings have been added...
-
-1999-12-23 Pablo Saratxaga <pablo@mandrakesoft.com>
- * eo.po: completed esperanto file
- * hr.po: updated Croatian file
- * zh_TW.Big5: updated chinese file
- * id.po: completed Indonesian file
- * et.po: completed Estonian file
- * sv.po: updated swedish file
- * da.po: completed Danish file
- * bg.po: updated Bulgarian file
- * sr.po: updated serbian file
- * no.po: completed norwegian file
-
-1999-12-22 Pablo Saratxaga <pablo@mandrakesoft.com>
- * de.po: update from Stefan Siegel <siegel@informatik.uni-kl.de>
- * bg.po: updated Bulgarian file
-
-1999-12-16 Pablo Saratxaga <pablo@mandrakesoft.com>
- * *.po: updated po files
- * ja.po: added japanese file
-
-1999-12-12 Pablo Saratxaga <pablo@mandrakesoft.com>
- * pt_BR.po: added portuguese file from Andrei <andreib@zaz.com.br>
-
-1999-12-10 Pablo Saratxaga <pablo@mandrakesoft.com>
- * et.po: completed 100% the Estonian file
-
-1999-12-09 Pablo Saratxaga <pablo@mandrakesoft.com>
- * th.po: Thai file from Kan Yuenyong <kan@kaiwal.com>
-
-1999-12-07 Pablo Saratxaga <pablo@mandrakesoft.com>
- * ro.po: did 'ispell -d romanian ro.po', I hope that improves the
- lack of 8 bit letters; but a real mantainer is needed.
-
-1999-12-02 Pablo Saratxaga <pablo@mandrakesoft.com>
- * es.po, ca.po, no.po, id.po: Completed Spanish, Catalan,
- Norwegian and Indonesian language files.
- * hu.po: Update of Hungarian file (60% done)
-
-1999-11-30 Pablo Saratxaga <pablo@mandrakesoft.com>
- * hu.po: added Hungarian language file
-
-1999-11-26 Pablo Saratxaga <pablo@mandrakesoft.com>
- * no.po: updated Norwegian file
- * ca.po: added beginnign of Catalan file from SoftCatalŕ
-
-1999-11-25 Pablo Saratxaga <pablo@mandrakesoft.com>
- * *.po: corrected a typo ( s/Size: %d/Size: %s/ )
- * de.po: updated German file
- * id.po: updated Indonesian file
-
-1999-11-24 Pablo Saratxaga <pablo@mandrakesoft.com>
- * bg.po: added Bulgarian file from Elena Radĺva <ely@triada.bg>
-
-1999-11-19 Pablo Saratxaga <pablo@mandrakesoft.com>
- * uk.po: added Ukrainian file
- * pl.po: Polish is now 100% complete!
-
-1999-11-18 Pablo Saratxaga <pablo@mandrakesoft.com>
- * et.po: added estonian from Riho Kurg <riho@aso.ee>
- * pl.po: updated polish from Pawel Jablonski
-
-1999-11-16 Pablo Saratxaga <pablo@mandrakesoft.com>
- * update-po, lots of new strings :)
- * es.po: updated & completed
-
-1999-11-10 Pablo Saratxaga <pablo@mandrakesoft.com>
- * es.po: completed
- * pl.po: updated from Pavel Jablonski
-
-1999-11-08 François PONS <fpons@mandrakesoft.com>
- * fr.po: updated.
-
-1999-11-05 Pablo Saratxaga <pablo@mandrakesoft.com>
- * pl.po: added Polish language file
- * ru.po: updated russian file
- * no.po: completed norwegian file
-
-1999-11-04 Pablo Saratxaga <pablo@mandrakesoft.com>
- * es.po: updated and completed spanish language file
- * wa.po: updated walon language file
-
-1999-10-30 Pablo Saratxaga <pablo@mandrakesoft.com>
- * es.po: updated spanish language file
-
-1999-10-22 Pablo Saratxaga <pablo@mandrakesoft.com>
- * it.po, es.po: uopdated spanish and italian language files
-
-1999-10-22 Pablo Saratxaga <pablo@mandrakesoft.com>
- * no.po: update of the Nowegian translation by Terje Bjerkelia
-
-1999-10-22 Pixel <pixel@linux-mandrake.com>
- * es.po: some corrections by Camille <camille@mandrakesoft.com>
-
-1999-10-21 François PONS <fpons@mandrakesoft.com>
- * fr.po: modified printer or queue translation (line 1950 and 2778)
-
-1999-10-21 Pablo Saratxaga <pablo@mandrakesoft.com>
- * es.po: updated Spanish language file
-
-1999-10-20 François PONS <fpons@mandrakesoft.com>
- * fr.po: corrected "Skip PCMCIA probing" message with new msgid
-
-1999-10-14 Pablo Saratxaga <pablo@mandrakesoft.com>
- * ru.po: new Russian translations from Aleksey Smirnov
- * no.po: update of the Nowegian translation by Terje Bjerkelia
-
-1999-10-13 Pablo Saratxaga <pablo@mandrakesoft.com>
- * *.po: checked that the name is correctly DrakX now, and updated them
- * tr.po: newer translations from Hakan Terziođlu <hakan@gelecek.com.tr>
-
-1999-10-11 Pablo Saratxaga <pablo@mandrakesoft.com>
- * no.po,es.po: updated Norwegian and Spanish language files
-
-1999-09-30 Pablo Saratxaga <pablo@mandrakesoft.com>
- * es.po: updated Spanish language file
-
-1999-09-26 Pablo Saratxaga <pablo@mandrakesoft.com>
- * no.po: updated norwegian file
-
-1999-09-25 Pablo Saratxaga <pablo@mandrakesoft.com>
- * it.po: updated italian file
-
-1999-09-19 Pablo Saratxaga <pablo@mandrakesoft.com>
- * no.po: update Norwegian language file
-
-1999-09-18 Pablo Saratxaga <pablo@mandrakesoft.com>
- * tr.po: Added Turkish language file from
- Hakan Terziođlu <hakan@gelecek.com.tr>
- * it.po: updated italian file
-
-1999-09-13 Pablo Saratxaga <pablo@mandrakesoft.com>
- * it.po: added italian language file from
- "Paolo Lorenzin" <pasusu@tin.it>
-
-1999-09-08 Pablo Saratxaga <pablo@mandrakesoft.com>
- * id.po, es.po: completed files
-
-1999-08-26 Pablo Saratxaga <pablo@mandrakesoft.com>
- * fr.po: updated fr.po from gregus@linux-mandrake.com (Grégoire Colbert)
- who is now in charge of the French translation
-
-1999-08-25 Pablo Saratxaga <pablo@mandrakesoft.com>
- * Makefile: corrected the msgmerge update (translations were
- being deleted !). make it so DrakX.pot has a header
- * *.po: get back all *.po files to the latest version including
- translated strings. add headers
- * id.po: update from indonesian team
-
-1999-08-22 Pablo Saratxaga <pablo@mandrakesoft.com>
- * no.po: added norwegian translations from
- Terje Bjerkelia <terje@bjerkelia.com>
-
-1999-08-18 Pablo Saratxaga <pablo@mandrakesoft.com>
- * Changelog: created a Changelog file
- * id.po: added indonesian translations from
- Mohammad DAMT <mdamt@cakraweb.com>
-
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
deleted file mode 100644
index e1495dcf3..000000000
--- a/perl-install/share/po/DrakX.pot
+++ /dev/null
@@ -1,10173 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2002-06-13 15:54+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:244
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:247
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:250
-msgid "Multi-head configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:251
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:263
-msgid "Select a graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "Choose a X server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "X server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "Choose a X driver"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "X driver"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367
-#: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:364
-msgid "Which configuration of XFree do you want to have?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:375
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:398
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:418
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:422
-msgid "XFree configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Select the memory size of your graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Choose options for server"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Choose a monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:578
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Horizontal refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:586
-msgid "Vertical refresh rate"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:623
-msgid "Monitor not configured"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:626
-msgid "Graphics card not configured yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:629
-msgid "Resolutions not chosen yet"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:647
-msgid "Do you want to test the configuration?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:651
-msgid "Warning: testing this graphics card may freeze your computer"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:654
-msgid "Test of the configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid "An error occurred:"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:745
-msgid "Is this the correct setting?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:754
-msgid "An error occurred, try to change some parameters"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:825
-msgid "Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:877
-msgid "Choose the resolution and the color depth"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:879
-#, c-format
-msgid "Graphics card: %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:880
-#, c-format
-msgid "XFree86 server: %s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:894 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:701
-#: ../../my_gtk.pm_.c:1034 ../../my_gtk.pm_.c:1056
-#: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359
-#: ../../standalone/drakbackup_.c:2375
-msgid "Ok"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2473 ../../standalone/drakfloppy_.c:146
-#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:897
-msgid "Show all"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:942
-msgid "Resolutions"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Monitor: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1518
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Graphics card identification: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "Color depth: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "Resolution: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1525
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1526
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1544
-msgid "Preparing X-Window configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1564
-msgid "What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1569
-msgid "Change Monitor"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Graphics card"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Change Server options"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1574
-msgid "Change Resolution"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1575
-msgid "Show information"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1576
-msgid "Test again"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2476
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1585
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1606
-msgid "Graphical interface at startup"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1607
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1613
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1628
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr ""
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr ""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr ""
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr ""
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr ""
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr ""
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr ""
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr ""
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr ""
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr ""
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr ""
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1087 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:710 ../../printerdrake.pm_.c:808
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr ""
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1088
-msgid "Password (again)"
-msgstr ""
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr ""
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr ""
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr ""
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1143
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "Please try again"
-msgstr ""
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "The passwords do not match"
-msgstr ""
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr ""
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741
-#: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790
-#: ../../standalone/drakfont_.c:827
-msgid "Add"
-msgstr ""
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr ""
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr ""
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr ""
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884
-msgid "Linux"
-msgstr ""
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr ""
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr ""
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr ""
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr ""
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr ""
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr ""
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr ""
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr ""
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr ""
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr ""
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr ""
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr ""
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr ""
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr ""
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr ""
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr ""
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr ""
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr ""
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "No"
-msgstr ""
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "Yes"
-msgstr ""
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr ""
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr ""
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr ""
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr ""
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr ""
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr ""
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr ""
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr ""
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr ""
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:709
-#: ../../printerdrake.pm_.c:807
-msgid "User name"
-msgstr ""
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr ""
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr ""
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr ""
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr ""
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr ""
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr ""
-
-#: ../../any.pm_.c:851
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-
-#: ../../any.pm_.c:865 ../../install_steps_interactive.pm_.c:689
-#: ../../standalone/drakxtv_.c:78
-msgid "All"
-msgstr ""
-
-#: ../../any.pm_.c:957
-msgid "Allow all users"
-msgstr ""
-
-#: ../../any.pm_.c:957
-msgid "Custom"
-msgstr ""
-
-#: ../../any.pm_.c:957
-msgid "No sharing"
-msgstr ""
-
-#: ../../any.pm_.c:967 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-
-#: ../../any.pm_.c:970
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm_.c:978 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:984
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:998 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:564
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:702 ../../my_gtk.pm_.c:705 ../../my_gtk.pm_.c:1034
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1588
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300
-#: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339
-#: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407
-#: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235
-#: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768
-#: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:1000
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1037
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "Poor"
-msgstr ""
-
-#: ../../any.pm_.c:1039 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1040
-msgid "High"
-msgstr ""
-
-#: ../../any.pm_.c:1041
-msgid "Higher"
-msgstr ""
-
-#: ../../any.pm_.c:1042
-msgid "Paranoid"
-msgstr ""
-
-#: ../../any.pm_.c:1045
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1050
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1051
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1054
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1059
-msgid "Please choose the desired security level."
-msgstr ""
-
-#: ../../any.pm_.c:1062
-msgid "Security level"
-msgstr ""
-
-#: ../../any.pm_.c:1064
-msgid "Use libsafe for servers"
-msgstr ""
-
-#: ../../any.pm_.c:1065
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../any.pm_.c:1067
-msgid "Security user (login or email)"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:354
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:910
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:913
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:916
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:919
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:922
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:926
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1026
-msgid "Desktop"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1028
-msgid "Start Menu"
-msgstr ""
-
-#: ../../bootloader.pm_.c:1047
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr ""
-
-#: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457
-#: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr ""
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2431 ../../standalone/drakbackup_.c:3335
-#: ../../standalone/drakfloppy_.c:377 ../../standalone/drakfont_.c:537
-#: ../../standalone/drakfont_.c:658 ../../standalone/drakfont_.c:721
-#: ../../standalone/drakfont_.c:766 ../../standalone/draknet_.c:109
-#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
-#: ../../standalone/draknet_.c:436 ../../standalone/draknet_.c:522
-#: ../../standalone/draknet_.c:565 ../../standalone/draknet_.c:666
-#: ../../standalone/logdrake_.c:520
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr ""
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr ""
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr ""
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113
-msgid "France"
-msgstr ""
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116
-msgid "Belgium"
-msgstr ""
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr ""
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr ""
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr ""
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr ""
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115
-#: ../../standalone/drakxtv_.c:74
-msgid "Italy"
-msgstr ""
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr ""
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:899
-#: ../../diskdrake/interactive.pm_.c:908 ../../diskdrake/interactive.pm_.c:962
-msgid "Read carefully!"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1058
-msgid "Empty"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933
-msgid "Other"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:535
-#: ../../diskdrake/interactive.pm_.c:562 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:629
-msgid "Resize"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:682
-msgid "Move"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:781
-msgid "Size in MB: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:782
-msgid "Filesystem type: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1042
-#: ../../diskdrake/interactive.pm_.c:1116
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:533
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/interactive.pm_.c:561
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:540
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:585
-msgid "Computing FAT filesystem bounds"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:585 ../../diskdrake/interactive.pm_.c:644
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:617
-msgid "This partition is not resizeable"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "All data on this partition should be backed-up"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:624
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:629
-msgid "Choose the new size"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:630
-msgid "New size in MB: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:683
-msgid "Which disk do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:684
-msgid "Sector"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:685
-msgid "Which sector do you want to move it to?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving partition..."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:705
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:706 ../../diskdrake/interactive.pm_.c:724
-msgid "new"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:722
-msgid "Choose an existing LVM to add to"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:727
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:767
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:779
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:785
-msgid "Give a file name"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:788
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:789
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:812
-msgid "Mount options"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:819
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:882 ../../standalone/drakfloppy_.c:104
-msgid "device"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:883
-msgid "level"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:884
-msgid "chunk size"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:899
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:914
-msgid "What type of partitioning?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:932
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:936
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:942
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:962
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:966
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:977
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:979
-msgid "Formatting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:980
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:981
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Hide files"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:992
-msgid "Move files to the new partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:993
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-msgid "Moving files to the new partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1008
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1012
-#, c-format
-msgid "Removing %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1022
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1043
-#: ../../diskdrake/interactive.pm_.c:1102
-msgid "Device: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1056
-#: ../../diskdrake/interactive.pm_.c:1120
-msgid "Type: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1052
-msgid "Name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1060
-#, c-format
-msgid "Start: sector %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "Size: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ", %s sectors"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1065
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1066
-msgid "Formatted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1067
-msgid "Not formatted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1068
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1069
-#, c-format
-msgid "RAID md%s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1071
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1072
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1074
-#, c-format
-msgid "Level %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1075
-#, c-format
-msgid "Chunk size %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1078
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1081
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1084
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1103
-#, c-format
-msgid "Size: %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1104
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1105
-msgid "Info: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1106
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1107
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1108
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1122
-#, c-format
-msgid "Options: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1142
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1143
-msgid "The encryption keys do not match"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1146
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1147
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr ""
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a medium"
-msgstr ""
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr ""
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr ""
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr ""
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:794
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:798
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:810
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for Windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partition to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr ""
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:675
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:690
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:615
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:525
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:757
-msgid "Installing"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation..."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-msgid "Refuse"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:782
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:794
-#: ../../install_steps_interactive.pm_.c:798
-msgid "Go on anyway?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:794
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:798
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1017
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "No partition available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:538
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:541
-msgid "Load from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Loading from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:548
-msgid "Insert a floppy containing package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:560
-msgid "Save on floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:628
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:641
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:642
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:645
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:647
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:648
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:732
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:737
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:757
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:766
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:812
-msgid "Post-install configuration"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:818
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:824
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:844
-msgid ""
-"You now have the opportunity to download encryption software.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:883
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been released after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:898
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:903
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Which is your timezone?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:944
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:952
-msgid "NTP Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:986
-#: ../../install_steps_interactive.pm_.c:994
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:987
-msgid "No printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1004
-msgid "Do you have an ISA sound card?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1008
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1013 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1016
-msgid "Mouse"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1019 ../../printerdrake.pm_.c:2279
-#: ../../printerdrake.pm_.c:2357
-msgid "Printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1021
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1024
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1028
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1066
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1094
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1067
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1068
-#: ../../install_steps_interactive.pm_.c:1090
-msgid "Local files"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1077
-#: ../../install_steps_interactive.pm_.c:1078 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1079
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1090 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1098
-msgid "Authentication LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1100
-msgid "LDAP Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1106
-msgid "Authentication NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1108
-msgid "NIS Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1143
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1159
-msgid "First floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid "Second floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1161 ../../printerdrake.pm_.c:1851
-msgid "Skip"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1166
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1180
-msgid "Sorry, no floppy drive available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1184
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1191
-msgid "Creating bootdisk..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1198
-msgid "Preparing bootloader..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1209
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1215
-msgid "Do you want to use aboot?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1218
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1225
-msgid "Installing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1231
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1239
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1283
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1287
-msgid "Creating auto install floppy..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1298
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1309
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1328
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Replay"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1336
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr ""
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button?"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230
-msgid "German"
-msgstr ""
-
-#: ../../keyboard.pm_.c:199
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237
-msgid "Spanish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238
-msgid "Finnish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239
-msgid "French"
-msgstr ""
-
-#: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264
-msgid "Norwegian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:204
-msgid "Polish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272
-msgid "Russian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:211
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:212
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:213
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:214
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:221
-msgid "Belgian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:222
-msgid "Bulgarian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:223
-msgid "Bulgarian (BDS)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Belarusian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:226
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:227
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:229
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:232
-msgid "Danish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:234
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Dvorak (Swedish)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Estonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:241
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Greek"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Hungarian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Croatian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:245
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:246
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:248
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:249
-msgid "Italian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:251
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-msgid "Korean keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:255
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:256
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:259
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:260
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-msgid "Latvian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:262
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:266
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:267
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:268
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Romanian (qwertz)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:271
-msgid "Romanian (qwerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:273
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:275
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:276
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:277
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "Tamil"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "Tajik keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:288
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:291
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:292
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:293
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:301
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:302
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:303
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:304
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:305
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:306
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:307
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:308
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:309
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:832
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr ""
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr ""
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:666
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:701
-msgid "Finish"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:701 ../../printerdrake.pm_.c:1590
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:702 ../../printerdrake.pm_.c:1588
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1034
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1098 ../../services.pm_.c:222
-msgid "Info"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1119
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1120
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1121
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248
-msgid "Choose the network interface"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364
-msgid "Configuring network"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369
-msgid "Host name"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229
-#: ../../network/netconnect.pm_.c:237
-msgid "Network Configuration Wizard"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr ""
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256
-#: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63
-msgid "Network Configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:171
-msgid "Choose the profile to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:172
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, c-format
-msgid "detected on port %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-msgid "ISDN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-msgid "ADSL connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-msgid "cable connection detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "LAN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:206
-msgid "Choose the connection you want to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:230
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:231
-msgid "Internet connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:237
-msgid "Do you want to start the connection at boot?"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:251
-msgid "Network configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:256
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:270
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:271
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:293
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:298
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309
-#, c-format
-msgid "Configuring network device %s"
-msgstr ""
-
-#: ../../network/network.pm_.c:309
-#, c-format
-msgid " (driver %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr ""
-
-#: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:313
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network/network.pm_.c:313
-msgid "Automatic IP"
-msgstr ""
-
-#: ../../network/network.pm_.c:314
-msgid "Start at boot"
-msgstr ""
-
-#: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:714
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:365
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:370
-msgid "DNS server"
-msgstr ""
-
-#: ../../network/network.pm_.c:371
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:373
-msgid "Gateway device"
-msgstr ""
-
-#: ../../network/network.pm_.c:385
-msgid "Proxies configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:386
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:391
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:392
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:41
-msgid "Internet configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:42
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:56
-msgid "The system is now connected to Internet."
-msgstr ""
-
-#: ../../network/tools.pm_.c:57
-msgid "For security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:58
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:82
-msgid "Connection Configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:95
-msgid "Choose your country"
-msgstr ""
-
-#: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr ""
-
-#: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr ""
-
-#: ../../network/tools.pm_.c:118
-msgid "United Kingdom"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr ""
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr ""
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr ""
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr ""
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:736
-msgid "Printer on remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr ""
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr ""
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:740
-msgid "Enter a printer device URI"
-msgstr ""
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2733
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr ""
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr ""
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ""
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1138
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr ""
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2394
-#: ../../printerdrake.pm_.c:2405 ../../printerdrake.pm_.c:2621
-#: ../../printerdrake.pm_.c:2673 ../../printerdrake.pm_.c:2700
-#: ../../printerdrake.pm_.c:2870 ../../printerdrake.pm_.c:2872
-msgid " (Default)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2457
-msgid "CUPS configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2458
-msgid "Specify CUPS server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:864
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:857
-msgid "Port"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2440
-#: ../../printerdrake.pm_.c:2559
-msgid "Add a new printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an "
-"HP LaserJet 2200?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:484
-msgid "Installing HPOJ package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:489
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:507
-msgid "Installing SANE package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:519
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:536
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:546 ../../printerdrake.pm_.c:1020
-#: ../../printerdrake.pm_.c:1134
-msgid "Reading printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:627
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:628
-msgid "Remote host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:629
-msgid "Remote printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:632
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:636
-msgid "Remote printer name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:705
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:706
-msgid "SMB server host"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:707
-msgid "SMB server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:708
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:711
-msgid "Workgroup"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:718
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:722
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:727
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:728
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:738
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:741
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:804
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:805
-msgid "Printer Server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:806
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:811
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:815
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-msgid "TCP/Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:855
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:856
-msgid "Printer host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:860
-msgid "Printer host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:889 ../../printerdrake.pm_.c:891
-msgid "Printer Device URI"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:890
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:905
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1008
-msgid "Description"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1009
-msgid "Location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1023
-msgid "Preparing printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1114
-msgid "Your printer model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1115
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1120 ../../printerdrake.pm_.c:1123
-msgid "The model is correct"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1121 ../../printerdrake.pm_.c:1122
-#: ../../printerdrake.pm_.c:1125
-msgid "Select model manually"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1141
-msgid "Printer model selection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1142
-msgid "Which printer model do you have?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1143
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1146
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1222
-msgid "OKI winprinter configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1223
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1266 ../../printerdrake.pm_.c:1293
-msgid "Lexmark inkjet configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1267
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1294
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1510
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1519
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1523
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1528
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1567
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1584
-msgid "Test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1585
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1589
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Print"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1592
-msgid "Standard test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1595
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1600
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1604
-msgid "Do not print any test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1749
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1637
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1641
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:2735
-msgid "Raw printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1689
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1692 ../../printerdrake.pm_.c:1708
-#: ../../printerdrake.pm_.c:1718
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1695 ../../printerdrake.pm_.c:1734
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1698
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1705 ../../printerdrake.pm_.c:1715
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1720
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1723
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1731
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:1747 ../../printerdrake.pm_.c:1748
-#: ../../printerdrake.pm_.c:2719 ../../standalone/drakbackup_.c:743
-#: ../../standalone/drakbackup_.c:2448 ../../standalone/drakfont_.c:580
-#: ../../standalone/drakfont_.c:792
-msgid "Close"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1755
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1744 ../../printerdrake.pm_.c:1756
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1746
-msgid "Print option list"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1768
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1775
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1797 ../../printerdrake.pm_.c:2224
-#: ../../printerdrake.pm_.c:2488
-msgid "Reading printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1817 ../../printerdrake.pm_.c:1845
-#: ../../printerdrake.pm_.c:1880
-msgid "Transfer printer configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1821
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1823
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1827
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1828
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1832
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1833 ../../printerdrake.pm_.c:1850
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1846
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1854
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1859
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1867
-msgid "New printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1870
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1881
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Refreshing printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1969
-#: ../../printerdrake.pm_.c:1981
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1899
-msgid "Starting network..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1933 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1939
-msgid "Configure the network now"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1934
-msgid "Network functionality not configured"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1938
-msgid "Go on without configuring the network"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1971
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1972
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1982
-msgid "Restarting printing system..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2020
-msgid "high"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2020
-msgid "paranoid"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2021
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2022
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2054
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2055
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2078 ../../printerdrake.pm_.c:2116
-#: ../../printerdrake.pm_.c:2146 ../../printerdrake.pm_.c:2179
-#: ../../printerdrake.pm_.c:2284
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2120
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2150
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2208
-msgid "Select Printer Spooler"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2209
-msgid "Which printing system (spooler) do you want to use?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2242
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2255
-msgid "Installing Foomatic..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2351
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2806
-msgid "Printer options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2321
-msgid "Preparing PrinterDrake..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2893
-msgid "Configuring applications..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2358
-msgid "Would you like to configure printing?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2370
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2418
-msgid "Printerdrake"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2422
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2423
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2449
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2467
-msgid "Change the printing system"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2472 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2628 ../../printerdrake.pm_.c:2678
-#: ../../printerdrake.pm_.c:2887
-msgid "Do you want to configure another printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2714
-msgid "Modify printer configuration"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2716
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2720
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2780
-msgid "Printer connection type"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2784
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2799
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2800
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2810
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2815
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2824
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2833
-msgid "Print test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2743 ../../printerdrake.pm_.c:2835
-msgid "Know how to use this printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2837
-msgid "Remove printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2789
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2813
-msgid "Default printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2814
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2818 ../../printerdrake.pm_.c:2821
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2822
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2827 ../../printerdrake.pm_.c:2830
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2831
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2839
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2841
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr ""
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr ""
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr ""
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr ""
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr ""
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr ""
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr ""
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr ""
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr ""
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923
-msgid "System"
-msgstr ""
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr ""
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr ""
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr ""
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:438
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:439
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:443
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:465
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:604
-msgid "Backup User files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:605
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:655
-msgid "Backup Other files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:663
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid ""
-"\n"
-" FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:676
-msgid " Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728
-#: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788
-msgid "File Selection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:744
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:779
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:780
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:781
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:782
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:783
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:784
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:801
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:828
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828
-msgid "Remove Selected"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:889
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:928
-msgid "Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:954
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:957
-msgid "Please enter the host name or IP."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:962
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter your login"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:972
-msgid "Please enter your password"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:978
-msgid "Remember this password"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038
-msgid "FTP Connection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046
-msgid "Secure Connection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883
-msgid "Please choose your CD space"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895
-msgid "Please check if you are using CDRW media"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1096
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1102
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1143
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1146
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193
-#: ../../standalone/drakbackup_.c:2003
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995
-msgid "Please enter the directory to save:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009
-msgid "Use quota for backup files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1257
-msgid "Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291
-#: ../../standalone/drakbackup_.c:1295
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292
-#: ../../standalone/drakbackup_.c:1295
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293
-#: ../../standalone/drakbackup_.c:1295
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294
-#: ../../standalone/drakbackup_.c:1295
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1302
-msgid "Use daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1307
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1313
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1317
-msgid "Use Hard Drive with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1319
-msgid "Use FTP with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1323
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1359
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1401
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1406
-msgid "Where"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "When"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "More Options"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791
-msgid "Drakbackup Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1453
-msgid "Please choose where you want to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1455
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1466
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1530
-msgid "Please choose what you want to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1531
-msgid "Backup system"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1532
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1535
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1617
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1618
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1620
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1622
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1624
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1625
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1626
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1629
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1631
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1633
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1743
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1745
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1776
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1777
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1876
-msgid " Restore Configuration "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1894
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1912
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1962
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1964
-msgid "please choose the date to restore"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1992
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2073
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2075
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2133
-msgid "Select another media to restore from"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2135
-msgid "Other Media"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2141
-msgid "Restore system"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2142
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2149
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2150
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2207
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2215
-msgid "Custom Restore"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2281
-#: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323
-#: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2373
-#: ../../standalone/drakbackup_.c:2389 ../../standalone/drakbackup_.c:2409
-#: ../../standalone/drakbackup_.c:2428 ../../standalone/drakbackup_.c:2450
-#: ../../standalone/drakfont_.c:578
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286
-#: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326
-#: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392
-#: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2307
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023
-msgid "Restore"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414
-#: ../../standalone/drakbackup_.c:2435
-msgid "Next"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2468
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2489
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2512
-msgid "Package List to Install"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2540
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2563
-msgid "Please select data to restore..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2584
-msgid "Please select media for backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2606
-msgid "Please select data to backup..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2628
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2649
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2729
-msgid "Backup system files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2731
-msgid "Backup user files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2733
-msgid "Backup other files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2757
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2761
-msgid "Sending files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2831
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2889
-msgid "Please enter the cd writer speed"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2907
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2913
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2979
-msgid "Backup Now from configuration file"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "View Backup Configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3010
-msgid "Wizard Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3014
-msgid "Advanced Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3018
-msgid "Backup Now"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3043
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3094
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3124
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3132
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3171
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3213
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3251
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3260
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3288
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:64
-msgid "usage: drakfloppy\n"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:68
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Module name"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:69
-msgid "Size"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373
-msgid "drakfloppy"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:91
-msgid "boot disk creation"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
-msgid "default"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:115
-#, c-format
-msgid "DrakFloppy Error: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:126
-msgid "kernel version"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:132
-msgid "General"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:137
-msgid "Expert Area"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:140
-msgid "mkinitrd optional arguments"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:141
-msgid "Add a module"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:161
-msgid "force"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:162
-msgid "if needed"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:163
-msgid "omit scsi modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:164
-msgid "omit raid modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:200
-msgid "Remove a module"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:222
-msgid "Output"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:234
-msgid "Build the disk"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:422
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:427
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:429
-#, c-format
-msgid "Unable to fork: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:433
-#, c-format
-msgid ""
-"Unable to close properly mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:230
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:232
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:254
-msgid "no fonts found"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304
-#: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413
-#: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448
-#: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473
-msgid "done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:266
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:302
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:305
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:328
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:351
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:354
-msgid "True Type fonts installation"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:358
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:362
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389
-#: ../../standalone/drakfont_.c:409
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:400
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:404
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:417
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:470
-msgid "xfs restart"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:551
-msgid "Fonts Importation"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:566
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:571
-msgid "Advanced Options"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:573
-msgid "Font List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:740
-msgid "Choose the applications that will support the fonts :"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:744
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:748
-msgid "StarOffice"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:752
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:756
-msgid "Generic Printers"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:793
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:829
-msgid "Install List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:859
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:896
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Selected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:898
-msgid "Remove List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:916
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:917
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:918
-msgid "Post Install"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:936
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:937
-msgid "Post Uninstall"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:122
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:135
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid "disable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:142
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:150
-msgid "Internet connection sharing is now disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:159
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:171
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:176
-msgid "Internet connection sharing is now enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:197
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:223
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, c-format
-msgid "Interface %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:232
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:239
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:240
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:249
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:267
-msgid "Network interface already configured"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:268
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:273
-msgid "Automatic reconfiguration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:274
-msgid "Show current interface configuration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:276
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:288
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:293
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:294
-msgid "(This) DHCP Server IP"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:295
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:302
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:313
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:321
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:322
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:329
-msgid "Configuring..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:330
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:366
-#, c-format
-msgid "Problems installing package %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:549
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:566
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:567
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:568
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:573
-msgid "Internet connection sharing configuration"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:580
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr ""
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr ""
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr ""
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr ""
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:51
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/draksec_.c:57
-msgid "Setting security user"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:55
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Canada (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "China (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "France [SECAM]"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "Ireland"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Australia"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:76
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:77
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:113
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:115
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:116
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:120
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:128
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:131
-msgid "There was an error while scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:132
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:135
-msgid "Have a nice day!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:136
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:148
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:149
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:407
-msgid "Mail/SMS alert configuration"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:408
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:416
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:420
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:421
-msgid "xinetd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:424
-msgid "service setting"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:425
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:435
-msgid "load setting"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:436
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:449
-msgid "alert configuration"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:450
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:493
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr ""
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr ""
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr ""
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr ""
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr ""
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr ""
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr ""
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr ""
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr ""
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr ""
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr ""
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr ""
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr ""
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr ""
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr ""
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Set of tools to read and send mail and news (pine, mutt, tin..) and to browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "A graphical environment with user-friendly set of applications and desktop tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr ""
diff --git a/perl-install/share/po/Makefile b/perl-install/share/po/Makefile
deleted file mode 100644
index 0913590b6..000000000
--- a/perl-install/share/po/Makefile
+++ /dev/null
@@ -1,75 +0,0 @@
-include ../../Makefile.config
-
-PMSFILES = $(wildcard $(ALLPMS:%=../../%))
-PMSCFILES = $(PMSFILES:%=%_.c)
-
-# temporarly don't include ar.po,br.po,cy.po,ga.po,is.po,ro.po,sl.po
-# (too low translation percentage)
-POFILES = $(shell ls *.po|grep -v '\(ar.po\|ga.po\|is.po\|ro.po\|sl.po\)')
-
-MOFILES = $(POFILES:%.po=%.mo)
-LANGS = $(POFILES:%.po=%)
-
-LOCALEDIR=$(DATADIR)/locale
-
-
-all: help $(MOFILES)
-
-help:
- @if [ ! -d doc ]; then \
- echo "Checking out doc stuff now ..."; \
- cvs co doc/manual/{entities,literal/drakx}; \
- rm -rf doc/CVS; \
- else \
- echo "Updating doc stuff now ..."; \
- cvs update doc/manual/{entities,literal/drakx}; \
- fi
- ./help_xml2pm.pl
-
-%.mo: %.po
- msgfmt -o $@ $<
-
-$(PMSCFILES): %_.c: %
- ./fake_c.pl $< > $@
-
-$(POFILES): DrakX.pot
- perl -ne 'print unless /^# DO NOT BOTHER TO MODIFY HERE, SEE:|^#.*\Qdrakx-help.xml/ .. /^$$/' $@ > $@t
- if [ -e help-$@t ]; then perl -pe 's|^#~ ||' -i $@t ; msgmerge -C $@t help-$@t $< > $@; else msgmerge $@t $< > $@; fi
- rm $@t
-
-DrakX.pot: $(PMSFILES)
- $(MAKE) $(PMSCFILES);
- xgettext -F -n --add-comments='-PO' --keyword=_ --keyword=__ -o $@ $(PMSCFILES)
- rm $(PMSCFILES)
- perl i18n_compssUsers 2>/dev/null >> $@
-
-install:
- for l in $(LANGS); do \
- install -d $(LOCALEDIR)/$$l/LC_MESSAGES; \
- install -m 644 $$l.mo $(LOCALEDIR)/$$l/LC_MESSAGES/$(NAME).mo; \
- done
-
-clean:
- @rm -rf drakx-help.xml .memdump help-*.po{t,} doc empty.po tmp.* messages tmp.pot *.mo $(POFILES:%=%t) $(PMSCFILES)
-
-check:
- @grep -F '$$' DrakX.pot && { echo "bad translation strings (contains \$$) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^"; exit 1; } ||:
-
-verif:
- perl -ne '/^\s*#/ or $$i += my @l = /\b__?\(/g; END { print "$$i\n" }' $(PMSFILES)
- perl -ne '$$i += my @l = /\.c:/g; END { print "$$i\n" }' DrakX.pot
-
-verif2:
-# perl -I ../.. -Mcommon -e 'foreach (qw($(PMSFILES))) { printf "package foo%d;\n", ++$$i; print common::cat_($$_) }' | perl -ne 'print if !/use (diagnostics|vars|strict)/' | OUTFILE=tmp.pm perl -I. -I../.. -Mb_dump_strings >/dev/null 2>/dev/null
- perl -pe 's|$$|\\n\\|' tmp.pm > tmp.pm_.c
- xgettext --keyword=_ -o tmp.po tmp.pm_.c
- msgmerge DrakX.pot tmp.po > tmp.pot
- grep "^msgid" tmp.pot | sort > tmp.pot.light
- grep "^msgid" DrakX.pot | sort | diff - tmp.pot.light | grep "^>" || true
-
-
-# for i in *.po; do echo -n "$i "; msgfmt -v $i 2>&1; done | perl -e 'print map { $_->[0] } sort { $a->[1] <=> $b->[1] } map { [ $_, (split)[1] ] } <>'
-
-
-%: %.sh
- # fake built-in
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
deleted file mode 100644
index 60896970c..000000000
--- a/perl-install/share/po/af.po
+++ /dev/null
@@ -1,12923 +0,0 @@
-# KTranslator Generated File
-# Copyright (c) 1999-2000 MandrakeSoft
-# Schalk. W. Cronjé <schalkc@ntaba.co.za>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-09-09 22:06-0000\n"
-"Last-Translator: Schalk W. Cronjé <schalkc@uk.ntaba.com>\n"
-"Language-Team: Afrikaans <mandrake@af.org.za>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigureer skyfkoppe afsonderlik"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-ekstensies"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigureer net die \"%s\" kaart (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multikopkonfigurasie"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"U stelsel onderstuen multikopkonfigurasie.\n"
-"Wat wil u doen?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Videokaart"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Selekteer 'n videokaart"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Kies 'n X-bediener"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-bediener"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Kies 'n X-bediener"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X-bediener"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Watter tipe XFree-konfigurasie verlang u?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
-"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D-hardwareversnelling"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
-"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasievertoondrywer)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree-konfigurasie"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Kies die geheue grootte van u videokaart"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Selekteer opsies vir bediener"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Kies 'n monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
-"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
-"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
-"belangrikste.\n"
-"\n"
-"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite dié van u\n"
-"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
-"kies konservatief."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horisontale verfristempo"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikale verfristempo"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafikakaart is nog nie konfigureer nie"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resolusie is nog nie gekies nie"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Wil u die konfigurasie toets?"
-
-#
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Toets konfigurasie"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probeer van die parameters verander"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Daar was 'n fout:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "uitgang binne %ds"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Is dit korrek?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hier is fout, probeer van die parameters verander"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolusie"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Kies die resolusie en kleurdiepte"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Videokaart: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 bediener: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Nog"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Kundige modus"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Vertoon almal"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolusies"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sleutelbord uitleg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistipe: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muistoestel: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HoriSink: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertVerfris: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Videokaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Videokaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Video geheue: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusie: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 bediener: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-drywer: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window konfigurasie word opgestel"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Wat wil u doen?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Verander monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Verander videokaart"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Verander bedienerinstellings"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Verander resolusie"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Vertoon inligting"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Toets weer"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Verlaat"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behou die veranderinge?\n"
-"Huidige konfigurasie is:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X met herlaai"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
-"Wil u X begin met 'n herlaai?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kleure (8 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32-duisend kleure (15 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65-duisend kleure (16 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16-miljoen kleure (24 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biljoen kleure (32 bis)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64MB of meer"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standaard VGA, 640x480 teen 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 teen 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-aanpasbaar, 1024x768 teen 87Hz interverweef (nie 800x600 nie)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 102x768 teen 87 Hz interverweef, 800x600 teen 56 Hz "
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Verlengde Super VGA, 800x600 teen 60 Hz, 640x480 teen 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Nie-interverweefde SVGA, 1024x768 teen 60 Hz, 800x600 teen 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hod frekwensie SVGA, 1024x768 teen 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 74Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekwensie wat 1280x1024 kan doen teen 76Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor wat 1600x1220 kan doen teen 70Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor wat 1600x1220 kan doen teen 76Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Eerste sektor van herlaaipartisie"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sektor van skyf (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO installasie"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wil u die herlaaistelsel installeer"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installasie"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO met tekskieskaart"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO met grafiese kieskaart"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Laai vauit DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Herlaaistelsel hoofopsies"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Herlaaistelsel om te gebruik"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Herlaaiprogram installasie"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Herlaaitoestel"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (werk nie op 'n ou BIOS'e nie)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompak"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompak"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Videomodus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Wagperiode voro verstekstelsel gelaai word"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Wagwoord"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Wagwoord (weer)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Beperk instruksielynopsies"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "beperk"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Maak /tmp skoon met elke herlaai"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Gebruik multiprofiele"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Gee die geheuegrootte in MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Probeer asb. weer"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Beginboodskap"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tydsbeperking vir stelselkernlaai"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Laat CD-herlaai toe?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Laat OF-herlaai toe?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Verstek bedryfstelsel?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier is die huidige inskrywings\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Voeg by"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Klaar"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Verander"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Watter tipe inskrywing wil u byvoeg?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ander bedryfstelsel (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ander bedryfstelsel (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ander bedryfstelsel (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Beeld"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Basis"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Aanlas"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lees-skryf"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Onveilig"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Verstek"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Geen video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Verwyder inskrywing"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Leë etiket word nie toegelaat nie"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Hierdie etiket is alreeds in gebruik"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Het %s %s koppelvlakke gevind"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Beskik u oor nog?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Het u enige %s koppelvlakke?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nee"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Sien hardeware inligting"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Watter %s drywer meot ek probeer?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
-"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
-"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
-"ophang, maar dit sal nie skade veroorsaak nie."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Aftas"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Spesifieer opsies"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"U kan noue die opsies voorsien vir module %s.\n"
-"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bv. ``io=0x300 irq-7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Module opsies:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laai van module %s het gefaal.\n"
-"Wil u ander parameters probeer?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s alreeds bygevoeg)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Die wagwoorde is te eenvoudig"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Gee asb. 'n gebruikerskode"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Hierdie genruikerskode bestaan alreeds"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Voeg gebruiker by"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Tik 'n gebruiker in\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aanvaar gebruiker"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Regte naam"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Gebruikerskode"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Dop"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Outointeken"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
-"Verlang u hierdie funksionaliteit?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Kies die verstek gebruiker:"
-
-#
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Kies die vensterbestuurder om te loop:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alles"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Voeg 'n gebruiker by"
-
-#
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Aangepaste"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS word gelaai"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Kanselleer"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Krakers welkom"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Swak"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standaard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hoog"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Hoog"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoďes"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
-"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
-"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
-"wagwoord\n"
-"toegang nie."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
-"aanbeveel nie."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
-"wat aan die internet as 'n kliënt konnekteer. Daar is heelwat "
-"sekuriteitstoetse."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
-"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kliënte\n"
-"af kan aanvaar."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
-"Sekuriteitseienskappe is maksimaal."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Gebruik sekuriteitsvlak"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Selekteer opsies vir bediener"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welkom by %s die bedryfstelselkeuseprogram!\n"
-"\n"
-"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
-"%d sekonde vir die verstekopsie.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
-"word."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nie genoeg spasie in /boot nie"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Werkskerm"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Beginkieskaart"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Waar wil u die herlaaistelsel installeer"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Gee hulp beskikbaar nie (nog nie).\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Herlaaistylkonfigurasie"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Lęer"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Lęer/_Verlaat"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<ctrl>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Nuwe monitorkategoriasiestyl"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Nuwe styl monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradisionele monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradisionele Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Laai Aurora met herlaaityd"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB metode"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot metode"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"U gebruik huidig %s as herlaaibestuurder.\n"
-"Kliek op Konfigureer om opstelassistent te laai."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigureer"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Stelselmode"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Laai X-Windowstelsel met herlaai"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nee, ek verlang outo-aanteken"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan nie /etc/inittab oopmaak vir lees nie: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minute"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondes"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankryk"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgies"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Duitsland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grieks"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norweegs"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Sien"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italiaans"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seriaal"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Rugsteun u data eers asb."
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lees noukeurig!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
-"van die skyf. (2048 sektors is genoeg)."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fout"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Kies aksie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"U het een massiewe FAT partisie. \n"
-"(gewoonlik deur DOS/Windows gebruik)\n"
-"Ek stel voor u verstel eers die grootte van dié partisie\n"
-"(kliek daarop en kliek dan op \"Verstel Grootte\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detail"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "Gejoernaliseer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Ruilarea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ander"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "LOersteltipes:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Skep"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' instede."
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Uitwis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik ``Ontheg'' eerste"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
-"partisietipe"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Kies 'n partisie"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Kies 'n ander partisie"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Verlaat"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Skakel oor na kundige gebruiksvlak"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Skakel oor na normale gebruiksvlak"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Herroep"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Wil u in elk geval voortgaan?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Verlaat, maar moenie iets stoor nie"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wil u die /etc/fstab veranderinge stoor?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Outo-allokeer"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Verwydeer almal"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Hardeskyfinligting"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle primęre partisies is gebruik"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
-"skep"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skryf partisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Reddingspartisietabel"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Verwyderbare media"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Selekteer lOer"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
-"Wil u voortgaan?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Waarskuwing"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sit 'n floppie in die aandrywer.\n"
-"Alle data op hierdie floppie sal verloor word."
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Partisietabel Reddingspoging"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Gedetaileerde inligting"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Hegpunt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opsies"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Verstel Grootte"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Skuif"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatteer"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Heg"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Voeg by RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Voeg by LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ontheg"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Verwyder uit RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Verwyder uit LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Verander RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Gebruik vir teruglus"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Kies 'n nuwe grootte"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Kies sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Hegpunt:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Voorkeure: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Terugluslęer %s word geformateer"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Verander partisietipe"
-
-#
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Watter lęerstelsel verlang u?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Oorskakeling van ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Waar wil u terugluslęer %s heg?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waar wil u toestel %s heg?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
-"gebruik word. Verwyder eers die teruglus."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT lęerstelselgrense word bereken"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Grootteverandering"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Hierdie partisie se greootte kan nie verstel word nie"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data om hierdie partisie moet gerugsteun word."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Kies die nuwe grootte"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nuwe grootte in MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na watter skyf wil u skuif?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na watter sektor wil u skuif?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Verskuiwing"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partisie word verskuif..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Kies 'n bestaande RAID om by toe te voeg"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nuut"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Kies 'n bestaande LVM om by toe te voeg"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM naam?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Teruglus"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Teruglus lęernaam:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Regte naam"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Lęer word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Lęer bestaan alreeds. Moet dit gebruik word?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Hegopsies:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Verskeie"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "toestel"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "vlak"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "blokgrootte"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Watter tipe van partisionering?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jammer, ek kan nie die versoek om /boot om hierdie skyf (op 'n silinder > "
-"1024) te skep,\n"
-"aanvaar nie. As u LILO gebruik sal dit nie werk nie en as u nie LILO "
-"gebruik\n"
-"nie, dan het u nie /boot nodig nie."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"_ keuse vir die \"root\" partisie (/) is fisies buite die 1024de silindervan "
-"die\n"
-"hardeskyf en u het nie 'n /boot partisie nie. Indien u beplan om LILO te "
-"gebruik,moet u\n"
-"asb. 'n /boot partisie skep,"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"U het 'n sagteware RAID-partisie as wortel (/).\n"
-"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
-"Onthou om 'n /boot by te voeg."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisietabel van skyf %s gaan opdateer word!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met formatering."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatering"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Terugluslęer %s word geformateer"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid het gefaal"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "LPD word verwyder..."
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Toestel:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipe:"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Naam: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Begin: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silinder %d na silinder %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Geformateer\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nie geformatter\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Geheg\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Teruglus lęer(s): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Verstekpartisie vir herlaai\n"
-" (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Vlak %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blokgrootte %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-skywe %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Teruglus lęernaam: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Dis hoogs waarskynlik dat hierdie partisie\n"
-"drywerpartisie is en verkieslik alleen gelos\n"
-"moet word.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Hierdie spesiale herlaaipartisie\n"
-"is om u stelsel te duolaai.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info:"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-skywe %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisietabeltipe: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opsies: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Verander tipe"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS bediener"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering ban %s het gefaal"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck het gefaal met kode %d of sein %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout met onthegting van %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "bediener"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Hegpunte moet met 'n / begin"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Hierdie lęergids moet altyd in die wortellęerstelsel bly"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "U benodig 'n ware lęerstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "U kan nie LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Four om %s in skryfmode te open: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"'n Fout het voorgekom - geen geldige toestelle om die nuwe lęerstelsels op "
-"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "U get geen partisies nie!"
-
-#: ../../help.pm_.c:13
-#, fuzzy
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is 'n multigebruikerstelsel en dit beteken dat elke gebruiker sy "
-"eie\n"
-"voorkeure kan stel, met sy eie lęers ens. U kan meer hieroor in die "
-"gebruikersgids\n"
-"lees. Maak andersins as 'root', die supergebruiker, kan gebruikers wat u "
-"hier byvoeg\n"
-"niks verander behalwe hul eie lęers en konfigurasie nie. U moet ten minste "
-"een gewone\n"
-"gebruiker vir u self skep. Hierdie gebruker is die een waaronder u moet "
-"inteken vir\n"
-"normale gebruik van die stelsel. Alhoewel dit baie gemaklik is om as 'root' "
-"in te teken vir\n"
-"daaglikse werk, is dit baie gevaarlik. 'n Eenvoudige fout kan u stelsel "
-"immobiliseer. 'n Fout\n"
-"wat as gewone gebruiker gemaak word sal net daardie gebruiker beďnvloed\n"
-"en nie hele stelsel nie.\n"
-"\n"
-"\n"
-"Eers moet u u eie naam intik. Dit is nie verpligtend nie, want u kan eintlik "
-"enigiets intik as\n"
-"u wil. DrakX sal dan die eerste woord wat u ingetik het in die "
-"gebruikerskode inskrywingsveld\n"
-"plaas. U kan hier verander indien u wil. Dit is die gebruikerskode waarmee "
-"die gebruiker in die\n"
-"stelsel sal inteken. U moet dan ook 'n wagwoord hier invoeg. 'n Gewone "
-"gebruiker se wagwoord\n"
-"is nie so krities as dié van die supergebruiker (uit 'n sekuriteitsoogpunt) "
-"nie, maar daar is geen\n"
-"rede om agterlosig met u data te wees nie.\n"
-"\n"
-"\n"
-"Indien u op Aanvaar kliek sal die gebruiker geskep word en kan u nog "
-"gebruikers byvoeg.\n"
-"U kan vir al u vriende gebruikerskodes skep of sommer een vir pa en ma ook. "
-"Wanneer u\n"
-"klaar is kliek op Klaar.\n"
-"\n"
-"Kliek op die Gevorderd knoppie indien u die verstek instruksiedop vir die "
-"gebruiker wil verander.\n"
-"Dit is bash by verstek."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
-"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
-"wat die rol van die diens verduidelik.\n"
-"\n"
-"Wees versigtig met hierdie stap. Indien u beplan om dié rekenaar as 'n\n"
-"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-#, fuzzy
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
-"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
-"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
-"installasie stop sit. Om met die installasie voort te gaan kliek op die "
-"Aanvaar\n"
-"knoppie."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr "Kies asb. "
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
-"ttyS0 onder GNU/Linux is."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
-"enige ander\n"
-"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
-"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
-"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-"\n"
-"\n"
-"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-"nodige\n"
-"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
-"betrokke bedryfstelsels te laai."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"U moet aandui waar u die informasie om Linux te herlaai, wil plaas.\n"
-"\n"
-"\n"
-"Behalwe as u werklik weet wat u doen moet u \"Eerste sektor van skyf (MBR)\" "
-"kies."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
-"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
-"dit outomaties installeer word.\n"
-"\n"
-"Indien u nie oor 'n SCSI-kaart, beskik nie of oor 'n ISA SCSI-kaart of 'n "
-"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
-"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
-"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
-"\n"
-"\n"
-"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
-"spesifiekeopsies.\n"
-"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
-"gewoonlik die beste.\n"
-"\n"
-"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
-"Windows-bedryfstelsel te bekom.\n"
-"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Hierdie floppie is nie in FAT-formaat nie"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
-"\"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fout met die les van lęer %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
-" U kan inligting hieroorvind by %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"U moet 'n wortelpartisie definieer.\n"
-"Skep 'n partisie of kliek op 'n bestaande een.\n"
-"Kies dan Hegpunt en stel dit dan '/'."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"U het nie 'n ruilpartisie nie\n"
-"\n"
-"Wil u steeds voortgaan?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Gebruik beskikbare spasie"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Gebruik bestaande partisies"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Daar is geen bestaande partisies om te gebruik nie"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik vir die Windows-partisie vir teruglus"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Watter partisie wil u vir Linux4Win gebruik?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Kies die groottes"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Basispartisiegrootte in MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ruilpartisiegrootte in MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Watter partisie se grootte wil u verander?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Windowslęerstelselgrense word bereken"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
-"Fout: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WAARSKUWING\n"
-"\n"
-"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
-"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
-"installasie\n"
-"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
-"na\n"
-"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
-"OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Watter grootte wil u vir Windows behou?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partisie %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-grootteverandering het gefaal: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Wis hele skyf"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Verwyder Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Gespesialiseerde skyfpartisionering"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"U het nou partisie %s partisioneer.\n"
-"Wanneer u klaar is, stoor u veranderinge met 'w'."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Die Windowspartisie beskik nie oor die nodige spasie nie."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ek kon geen plek vir installasie vind nie."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisionering het misluk: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Netwerk op pad op"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Netwerk op pad af"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
-"nie. Gaan op u eie risiko voort."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikaat hegpunt %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Sekere belangrike pakkette het nie korrek geďnstalleer nie.\n"
-"Óf die CDROM-aandrywer óf die CD is foutief.\n"
-"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom by %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gaan stap '%s' binne\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
-"die installering\n"
-"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
-"Daarvoor moet u\n"
-"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
-"instruksielyn intik."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installasieklas"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Kies asb. een van die volgende installasieklasse:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Die totale grootte vir die gekose groepe is naastenby %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Indien u verkies om minder as hierdie grootte te installeer, kies dan 'n\n"
-"persentasie van pakkette wat u wil installeer.\n"
-"\n"
-"'n Lae persentasie sal net die belangrikste pakkette installeer;\n"
-"'n persentasie van 100%% sal alles gekose pakkette installeer."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"U het net spasie op u hardeskyf vir %d%% van hierdie pakkette.\n"
-"\n"
-"Indien u minder wil installeer, kies die persentasie wat u verlang.\n"
-"'n Lae persentasie sal net die belangrikste pakkette installeer;\n"
-"'n Persentasie van %d%% sal soveel moontlik probeer installeer."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "U sal met meer akkuraatheid in die volgende stap kan kies."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Persentasie pakkette om te installeer"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Kies pakketgroepe"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuele pakketseleksie"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Foutiewe pakket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Weergawe: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Groote: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrikheid: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
-"beskikbaar is nie"
-
-#
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Die volgende pakkette gaan installeer word"
-
-#
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Dei volgende pakkette gaan verwyder word"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geďnstalleer"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Wys outogeselekteerde pakkette."
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installasie"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Laai/Stoor op floppie"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Pakketseleksie word opgedateer"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimale installasie"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Besig met installasie"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Skatting"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tyd oor "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Wag asb. installasie word voorberei"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakkette"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installeer pakket %s"
-
-#
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aanvaar "
-
-#
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Weier"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verander u CDROM!\n"
-"\n"
-"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
-"nie\n"
-"hieroor beskik nie, druk Kanselleer om installasies vanaf dié CDROM te vermy."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Gaan steeds voort?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Daar was 'n fout met pakkette:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "'n Fout het voorgekom"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Wil u die werklik die drukker verwyder?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisensieooreenkoms"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Sleutelbord"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Watter installasieklas verlang u?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installeer/Opgradeer"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Is hierdie 'n installasie of opgradering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Aanbevole"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Kundige"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Opgradeer"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Pakketseleksie word opgedateer"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Knoppie-emulasie"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Knop-2 Emulasie"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Knop-3 emulasie"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Stel PCMCIA op..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE word opgestel"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "geen beskikbare partisies"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Hegpunte vir partisies word nou gesoek"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Kies die hegpunte"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
-"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
-"(fout is %s)\n"
-"\n"
-"Will u al die partisies verwyder?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DrakX kon nie die partisietabel korrek interpreteer nie.\n"
-"Gaan aan op u eie risiko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
-"sal herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
-"herlaai."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Geen wortellęerstelsel gevind nie"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Basispartisie"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Wat is die basispartisie (/) van u stelsel?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Kies die partisies om te formatteer"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Toets vir foutiewe areas?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Partisies word formateer"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Lęer %s word geskep en formatteer"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Soek vir beskikbare pakkette"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Soek vir pakkette om op te gradeer."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Klaar (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Aanbevole (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
-"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Laai vanaf floppie"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Oplaai vanaf floppie"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakketkeuse"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Stoor op floppie"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Kies pakket om te installeer"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Wag"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
-"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
-"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM getiteld \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Berei installasie voor"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installeer nou pakket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Postinstallasiekonfigurasie"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"U het nou die kans om enkripsieprogrammatuur af te laai.\n"
-"\n"
-"WAARSKUWING:\n"
-"\n"
-"A.g.v. die verskillende algemene vereistes wat van toepassing gemaak word "
-"deur\n"
-"wetgewing, moet die eindgebruiker van hierdie sagteware seker wees dat die\n"
-"wette in sy/haar land dit wel toelaat dat om hierdie agteware af te laai, "
-"aan te hou\n"
-"en te gebruik.\n"
-"Daarbenewens moet die gebruiker seker maak dat plaaslike wetgewing nie "
-"oortree\n"
-"word nie. Misbruik kan lei tot ernstige sanksies.\n"
-"\n"
-"In geen geval kan MandrakeSoft nog sy vervaardigers en verskaffers "
-"verantwoordelik\n"
-"gehou word vir spesiale, indirekte or toevallige skade berokken (insluitend, "
-"maar nie\n"
-"beperk tot, winsverlies, besigheidsonderbreking, dataverlies en enige "
-"voorspruitende laste\n"
-"soos moontlik bepaal deur die wetgewende hof) wat vooruitspruit uit die "
-"gebruik, besit\n"
-"of aflaai van hierdie programmatuur nie, na tekening wat hierdie ooreenkoms "
-"nie.\n"
-"\n"
-"\n"
-"Vir navrae vewant aan hierdie ooreenkoms, kontak asb.\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Spieël word gekontak vir die lys van pakkette"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies 'n spieël waar die pakkette verkry kan word"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Spieël word gekontak vir die lys van pakkette"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wat is u tydsone?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardewareklok gestel vir GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Outotydsinkronisasie met NTP"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-bediener"
-
-#
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Verwyder CUPS-bediener"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Geen drukker"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Beskik u oor nog?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Opsomming"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Muis"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Tydsone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Drukker"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-kaart"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Klankkaart"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kaaer"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "KDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Plaaslike lęers"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Kies 'root' se wagwoord"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Geen wagwoord"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Magtiging"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP-magtiging"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Basis-dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-bediener"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS-magtiging"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-bediener"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
-"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel.\n"
-"\n"
-"Indien u 'n herlaaiskyf wil maak,\n"
-"plaas 'n skyf in die aandrywer en druk \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Eerste sagteskyfaandrywer"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Tweede sagteskyfaandrywer"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Mis hierdie stap"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
-"LILO\n"
-"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sit 'n skyf in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Herlaaiskyf word geskryf"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Herlaaistelsel word voorberei"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Wil u aboot gebruik?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
-"word die eerste partisie vernietig?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Herlaaistelselinstallasie"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sit 'n leë floppie in aandrywer %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Outoinstallasieskyf word geskep."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bepaalde stappe is nie afgehandel nie.\n"
-"\n"
-"Wil u werklik nou aborteer?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Geluk, installasie is afgehandel.\n"
-"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
-"\n"
-"\n"
-"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
-"bekyk die errata beskikbaar op\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
-"hoofstuk in die Offisiële Liux-Mandrake Gebruikersgids."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Skep outoinstallasieskyf"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Outomaties"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Herspeel"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Stoor pakketseleksie"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installasie %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> tussen elemente | <Space> selekteer | <F12> volgende skerm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu is weg"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Kies 'n lęer"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Gevorderd"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Wag asb."
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Maak boom oop"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Maak boom toe"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Skakel tussen plat- en groepsortering"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Swak keuse, probeer weer\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opsies: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Wil u aboot gebruik?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "U keuse? (verstek %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tseggies (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Duits"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaans"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finnies"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Frans"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norweegs"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pools"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russies"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sweeds"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "VK sleutelbord"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "VSA sleutelbord"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanies"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenies (oud)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenies (tikmasjien)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latyns)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgies"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaars"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliaans (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarussies"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Switsers (Duitse uitleg)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Switsers (Franse uitleg)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tseggies (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Duits (geen dooie sleutels)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Deens"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norweegs)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniaans"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgies (Russiese uitleg)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgies (Latynse uitleg)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grieks"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hongaars"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroaties"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelies"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelies (Foneties)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranies"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Yslandies"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiaans"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanees 106 sleutels"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreaanse sleutelbord"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latyns-Amerikaans"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanies AZERTY (oud)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanies AZERTY (nuut)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanies \"nommerry\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanies \"foneties\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvies"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Masedonies"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nederlands"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pools (QWERTY uitleg)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pools (QWERTZ uitleg)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadees (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romanies (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romanies (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russue (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloveens"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serwies (Kirillies)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabel"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai sleutelbord"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik sleutelbord"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (tradisionele \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (moderne \"Q\" modem)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukranies"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "VSA internasionale sleutelbord"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Viëtnamees \"nommerry\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavs (latynse uitleg)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Sirkulęre heg %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Verwyder eers die logiese volumes\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Muis"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generiese PS2 wielmuis"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knop"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generiese 2-knop muis"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generies"
-
-#
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wiel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriaal"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generiese 3-knop muis"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Reeks (seriaal)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Muis (seriaal, ou C7 tipe)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmuis"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knoppies"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knoppies"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "niks"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Geen muis"
-
-#
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Toets asb. die muis"
-
-#
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Om die muis te aktiveer"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG DIE WIEL!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finnies"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Volgende ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Vorige"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Is dit korrek?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konnekteer aan die internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Die mees algemene metode vir ADSL is om pppoe te gebruik.\n"
-"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
-"Indien u nie weet nie, kies 'gebruik pppoe'."
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "gebruik dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "gebruik pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "gebruik pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Watter DCHP-kliënt wil u gebruik?\n"
-"Verstek is dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie.\n"
-"Ek kan nie hierdie konneksietipe opstel nie."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Kies die netwerkkoppelvlak"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "geen netwerkkaart gevind nie"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Stel netwerk op"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Sekere DHCP-bedieners benodig die rekenaarnaam.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''."
-
-#
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Rekenaarnaam"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Netwerkkonfigurasie-assistent"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksterne ISDN-kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN-kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Watter tipe is u ISDN-konneksie?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Ou konfigurasie (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Konfigurasie"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Kies u internetdiensvoorsiener.\n"
-"Indien nie in die lys nie kies Ongelys"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europese protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europese protokol (EDSS1)"
-
-#
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol vir die res van die węreld"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol vir die res vd węreld \n"
-" geen D-Kanaal nie (bruikhuurlyne)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Watter protokol verlang u?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Oor watter tipe kaart beskik u?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ek weet nie"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
-"wees.\n"
-"\n"
-"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Aborteer"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Gaan voort"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Wat is u ISDN-kaart?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
-"PCI-kaart op die volgende skerm."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opbelopsies"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Konneksienaam"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefoonnommer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Aantekenkode"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skriptipe"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminaaltipe"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeinnaam"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-bediener (opsioneel)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-bediener (opsioneel)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"U kan diskonnekteer or herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"U kan u konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "U is tans aan die internet gekonnekteer."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"U kan aan die internet konnekter of u konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "U is nie tans aan die internet gekonnekteer nie."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konnekteer"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Diskonnekteer"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Stel netwerk op"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetkonneksie en konfigurasie"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ons gaan nou die %s konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ons gan nou die %s konneksie konfigureer.\n"
-"\n"
-"\n"
-"Drk OK om voort te gaan."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Omdat u netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
-"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
-"& Netwerkkonneksie te herkonfigureer.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Welkom by die Netwerkkonfigurasie-assistent\n"
-"\n"
-"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
-"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Kies die profiel om te konfigureer"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Gebruik outobespeuring"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Toestel word afgetas..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normale modemkonneksie"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "Op poort %s bespeur"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konneksie"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s bespeur"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konneksie"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "op koppelvlak %s bespeur"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelkonneksie"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kabelkonneksie bespeur"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN konneksie"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(e) bespeur"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Kies die konneksie wat u wil konfigureer"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"U het meer as een internetkonneksiemetode opgste.\n"
-"Kies die een wat u verlang.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetkonneksie"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Daar was 'n probleem met die herlaai van die netwerk.\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
-"\n"
-"Die kongiurasie gaan op u stelsel toegepas word.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
-"om die rekenaarnaamveranderingprobleem te voorkom."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
-"konnekteer.\n"
-"U kan die toestel net so aanvaar.\n"
-"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
-"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
-"(1.2.3.4) gegee word."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigureer netwerktoestel %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr "(drywer %s)"
-
-#
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adres"
-
-#
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmasker"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Outomatiese IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''.\n"
-"U mag ook die netwerkhek byvoeg indien daar een is"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS bediener"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Netwerkportaaltoestel"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Instaanbedienerkonfigurasie"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP instaanbediener"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP instaanbediener"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Instaanbediener moet begin met http://"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Instaanbediener moet begin met ftp://"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wil u nou aan die internet konnekteer?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Konneksie word getoets..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Die stelsel is nou aan die internet gekonnekteer."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
-"Probeer om u stelsel te herkonfigureer."
-
-#
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konneksiekonfigurasie"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Vul asb. die velde hieronder in"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kaart IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kaartgeheue (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kaart I/O"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kaart IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kaart IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "U persoonlike telefoonnommer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Voorsienernaam (bv voorsiener.co.za)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Voorsiener se telefoonnommer"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Voorsiener DNS 1 (opsioneel)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Voorsiener DNS 2 (opsioneel)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Kies u land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Belmetode"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Konneksiespoed"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Konneksie tydlimiet (in sekondes)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Gebruikerskode"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Wagwoord"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "heg het gefaal"
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
-"Die enigste oplossing is om die primęre partisie te skuif sodat die gat\n"
-"langs die ekstensie partisies is"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Herstel van léer %s het gefaal: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout in die skryf van %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Iets vrots gebeur op u hardeskyf.\n"
-"'n Dataintegriteitstoets het misluk.\n"
-"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
-"eindig."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "benodig"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "belangrik"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "baie oulik"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "oulik"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "moontlik"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Nuwe generasie LPR"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Lyndrukkerdiensprogram"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Druk sonder drukkertou"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Plaaslike drukker"
-
-#
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Eksterne drukker"
-
-#
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Eksterne CUPS-drukker"
-
-#
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Eksterne LPD-drukker"
-
-#
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Netwerkdrukker (sok)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Eksterne Netware-drukker"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Tik drukkertoestel URI in"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Pyk drukstuk na program"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Onbekende model"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Plaaslike drukker"
-
-#
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Eksterne drukker"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Fout in die skryf van %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(op %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(op hierdie rekenaar)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-bediener IP:"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Verstek)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Kies drukkerkonneksie"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hoe is die drukker gekonekteer?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-"op te stel nie; drukkers wod outomaties bespeur.\n"
-"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Konfigurasie"
-
-#
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Verwyder CUPS-bediener"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adres moet iets soos 192.168.1.20. lyk"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Die poortnommer moet heeltal wees."
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-bediener IP:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Poort"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Outomatiese CUPS konfigurasie"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Toestel word afgetas..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Toets poorte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Voeg drukker by"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Plaaslike drukker"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Eksterne drukker"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Gebruik outobespeuring"
-
-#
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s bespeur"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Tik drukkertoestel URI in"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Plaaslike drukker"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Tik drukkertoestel URI in"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Kleurkonfigurasie"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Installeer pakket %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Installeer pakket %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Eksterne lpd drukkeropsies"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
-"van die drukkkerbediener en die naam van die drukkertou\n"
-"voorsien word."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Eksterne bedienernaam"
-
-#
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Eksterne bedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Eksterne drukkernam ontbreek!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) drukkeropsies"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
-"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
-"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
-"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-bedienernaam"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-bediener IP:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Drukkernaam:"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Werkgroep:"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Óf die bedienernaam óf die bediener-IP moet verskaf word!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "SAMBA-deelnaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare drukkeropsies"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
-"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
-"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
-"die drukkernaam; toepaslike gebruikerskode en wagwoord."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Drukkerbediener"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Drukkertounaam"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-bedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-tounaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Sokdrukkeropsies"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
-"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
-"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
-"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
-"wat saam met die hardeware gekom het."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Drukkerbedienernaam"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Drukkerbedienernaam ontbreek!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Drukkertoestel URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
-"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
-"spoelprogramme ondersteun nie."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Elke drukker benodig naam (bv. lp).\n"
-"Die Beskrywing- en Liggingvelde is opsioneel.\n"
-"Hulle dien as inligting vir gebruikers."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Drukkernaam"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beskrywing"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ligging"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Drukkerdata word gelees..."
-
-#
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Is dit korrek?"
-
-#
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Oor watter tipe drukker beskik u?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsie %s moet 'n heeltal wees!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsie %s moet 'n nommer wees"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opsie %s is buite bereik!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Toetsbladsye"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Geen toetsbladsye"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Druk"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standaard toetsbladsy"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternatiewe toetsbladsy (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fototoetsbladsy"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Toetsbladsy(e) word gedruk..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-"Drukstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukker gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Het dit reg gewerk?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Geen drukker"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Sluit af"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Netwerk op pad af"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Netwerk op pad af"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Drukkeropsies"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Dra drukkerkonfigurasie oor"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Moet nie drukkers oordra nie"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Oordrag"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nuwe drukkernaam"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s word oorgedra..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Konneksie word begin..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Hoog"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoďes"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Installeerde sagteware word deursoek..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng word verwyder..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD word verwyder..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Kies drukkerspoelprogram"
-
-#
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Installeer pakket %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Drukkeropsies"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfigureer drukker"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Drukkerstelsel:"
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Drukker"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Hier is die bestaande drukkertoue.\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Hier is die bestaande drukkertoue.\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Stel netwerk op"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normale modus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Wil u die konfigurasie toets?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drukker %s: %s %s\n"
-"Wil u hierdie drukker verander?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Gaan voort!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Drukkerkonneksietipe"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Drukkernaam,. beskrywing, ligging"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Drukkervervaardiger, model, drywer"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Drukkervervaardiger, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Maak hierdie die verstekdrukker"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Wil u die konfigurasie toets?"
-
-#
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Verwyder drukker"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Verstek drukker"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Drukker \"%s\" is nou die verstekdrukker"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Wil u die werklik die drukker verwyder?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Instaanbedienerkonfigurasie"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Poort"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Instaanbediener moet begin met http://"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Die poortgedeelte moet numeries wees"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Vul asb. die FTP-instaanbediener inligting in\n"
-"Los dit oop indien u nie FTP-instaanbediener verlang nie"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Instaanbediener moet begin met ftp://"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Gebruikerskode"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Herhaal wagwoord"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Geen wagwoord"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Die wagwoorde stem nie ooreen nie. Probeer weer!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan nie lęer %s skryf nie"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid het gefaal"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron is skeduleerder vir periodiese instruksies."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd word gebruik om battery status te monitor en dit dan te log via "
-"syslog.\n"
-"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
-"swak is."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
-"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
-"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
-"funksionaliteit\n"
-"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
-"konfigurasie."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM verleen muisvermoëns aan teksgebaseerde Linuxapplikasies soos\n"
-"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
-"konsole toe asook opspringkieskaarte."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache is 'n WWW-bediener.\n"
-"Dit kan HTML-lęers uitstuur en CGI's hanteer"
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
-"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
-"vir\n"
-"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
-"waarvoor\n"
-"inetd verantwoordelik is."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
-"keyboard\n"
-"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
-"dit\n"
-"op meeste rekenaars ongesper laat."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
-"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-"rekenaarname na IP-adresse toe om te skakel."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Heg en ontheg all netwerklęerstels (NFS), SMB (Lan Manger/Windows)\n"
-"en NCP (Netware) hegpunte."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
-"herlaaityf te begin."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS is 'n populęre protokol vir lęerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
-"die /etc/exports lęer opgestel."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS is 'n populęre protokol vir lęerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens vorosien die NFS-lęersluitfunksionaliteit."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
-"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
-"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
-"veilig om op rekenaars te hę wat dit nie nodig het nie."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
-"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
-"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
-"van een bediener na 'n ander oordra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Stoor en herstel die stelselentropiepoel vir hoë kwaliteit,\n"
-"lukraaknommergenerasie."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
-"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
-"meer komplekse protokolle nodig vir komplekse netwerke."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
-"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
-"aangeteken is op ander samewerkende rekenaars."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
-"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop. (Amper soos "
-"'finger')."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Laai die klankstelsel op u rekenaar"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
-"te log na 'n verskeidenheid loglęers. Dit is altyd goed om syslog te loop."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Laai die drywers vir u USB-toestelle"
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Druk"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Stelselmode"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Eksterne lpd drukkeropsies"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Datbasis"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktief"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "onaktief"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "met herlaai"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Toestand"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol vir die res van die węreld"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internettoegang"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Beheersentrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Netwerkkoppelvlak"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB-bedienernaam"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Speletjies"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Kundige"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "verpligtend"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Installeer pakket %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmak."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Outoinstallasiekonfigurasieprogram"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Outomatiese Stappe Konfigurasie"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Geluk!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die floppie is sukselvol geskep.\n"
-"U kan nou weer 'n installasie uitspeel."
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Terugluslęer %s word geformateer"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Pakketkeuse"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Verwyder tou"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Verwyder Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Probeer asb. weer"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Probeer asb. weer"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Geen wagwoord"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN konneksie"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Kies drukkerkonneksie"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Netwerkkoppelvlak"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "gebruik hardeksyfoptimisasie?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "gebruik hardeksyfoptimisasie?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Wag"
-
-#
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Wiel"
-
-#
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Wiel"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Module opsies:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Stel lęerstelsels op"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opsies"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Wat is u muistoestel?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Herstel vanaf floppie"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Wat is u muistoestel?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Ander"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Installeer stelsel"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Herstel vanaf lęer"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Herstel vanaf lęer"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Aangepaste"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Vorige"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Toestand"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Herstel vanaf lęer"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Teks"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Kies pakkette om te installeer"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Korrupte rugsteunlęer"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Stoor in lęer"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Konfigurasie"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Sluit konfigurasie af"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Stel lęerstelsels op"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s is nie gevind nie"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Klaar"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formatteer floppie"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Berei installasie voor"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "Laai dit"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "beperk"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formateer partisies"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Deďnstallasie van RPMs"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Sluit konfigurasie af"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Hegpunt"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Kies die partisies om te formatteer"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Kantoor"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Aborteer"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Drukker"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Installeer stelsel"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Selekteer lOer"
-
-#
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Verwyder drukker"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Beginboodskap"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Verlaay installasie"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetkonneksiedeling"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetkonneksiedeling is ontsper"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans aktief.\n"
-"\n"
-"Wat wil u doen?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "deaktiveer"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ignoreer/sien oor"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "herkonfigureer"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Bedieners word gedeaktiveer..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetkonneksiedeling is gedeaktiveer"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetkonneksiedeling is gesper"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans gedeaktiveer.\n"
-"\n"
-"Wat wil u doen?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "Aktiveer"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Bedieneers word aktiveer..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetkonneksiedeling is geaktiveer"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Koppelvlak %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
-"hardewarekonfigurasieprogram."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netwerkkoppelvlak"
-
-#
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
-"\n"
-"%s\n"
-"\n"
-"Ek gaan nou u LAN met daardie kaart opstel."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor is nie opgestel nie"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Outomatiese CUPS konfigurasie"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS-bediener IP:"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Vuurmuurkonfigurasie gevind!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
-"dietyd self regstellings moet aanbring."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurasie in aabou..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme met Installasue van pakket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Internetkonneksiedelingkonfigurasie"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Internetkonneksiedeling"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerkkonfigurasie (%d toestelle)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiel:"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Vee profiel uit..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profiel om uit te vee..."
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nuwe profiel..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Bedienernaam:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internettoegang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipe:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Portaal:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Koppelvlak:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigureer internettoegang..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN-konfigurasie"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drywer"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Koppelvlak"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Toestand"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Stel plaaslike netwerk op..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistent..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Pas toe"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Wag asb... Konfigurasie word toegpas"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Gekonnekteer"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konnekteer..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Diskonnekteer..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN konfigurasie"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Toestel %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Herlaaiprotokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Gelaai tydens herlaaityd"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-kliënt"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "Aktiveer nou dadelik"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktiveer nou dadelik"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetkonneksiekonfigurasie"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetkonneksiekonfigurasie"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Konneksietipe:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Portaal"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernetkaart"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-Kliënt"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Beheersentrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Kies die instrument wat u wil gebruik"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadees (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Yslandies"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seriaal"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "gebruik: keyboarddrake [--expert] [SleutelbordNaam]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-"Wil u hę dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
-"terugstuur)?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Verander CDROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
-"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kon nie die intydse opgradering begin nie !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Beginboodskap"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Konfigurasie"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "skadu's"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Verlaat"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interessant"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatering"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Kleurkonfigurasie"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Geen 'serial_usb' gevind nie\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuleer derde knop?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Selekteer 'n videokaart"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Herlaaitoestel"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Vuurmuur\n"
-"\n"
-"Kliek op Konfigureer om die standaard vuurmuur op te stel."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kies u taal"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Kies installasieklas"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Hardeskyfdeteksie."
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Stel muistoestel op"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Kies u sleutelbord"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sekuriteit"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Stel lęerstelsels op"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formateer partisies"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Kies pakkette om te installeer"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installeer stelsel"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Stel netwerk op"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigureer dienste"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installeer herlaaistelsel"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Maar 'n herlaaiskyf"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Stel X op"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Installeer stelsel"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Verlaay installasie"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurasie is voltooi. Moet ons hierdie veranderinge na skyf skryf?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan nie %s oopmaak nie: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kon nie %s in skryfmode oopmaak nie: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Vuurmuurkonfigurasie"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Wag asb. installasie word voorberei"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netwerkrekenaar (kliënt)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS, SMB, Instaan- , SSH (Bedieners)"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kantoor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Nutsprogramme vir PalmPilot en/of Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Vuurmuur/Netwerkroteerder"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinnaam en Netwerk Informasie Bediener (DNS/NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kantoorprogramme: Woordverwerkers( kword, abiword), spreistate (kspread, "
-"gnumeric), PDF-sigprogramme, ens."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Klankprogramme: MP3- of MIDI-spelers, mengers, ens."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Boeke en HOWTO's oor Linux en Vrye Sagteware"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE werkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ens."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Hulpprogramme vir e-pos, netnuus, web, FTP en netpraat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Datbasis"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL of MySQL databasisbediener"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Hulpprogramme vir u rekenaarkonfigurasie te vergemaklik"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Klank"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Nutsprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "dokumentasie"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsole hulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix e-posbediener, Inn netnuusbediener"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetstasie"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediastasie"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurasie"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Addisionele grafiese werkskerms (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Die K-werkskermomgewing (KDE), die basiese grafiese omgewing met 'n "
-"versameling bygaande hulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafiese omgewing"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Hulpprogramme vir die skep en brand van CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kantoorwerkstasie"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Bediener"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ens."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiese programme soos Die GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C en C++ ontwikkelingsprogrammateke, programme en insluitlęers"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netwerkrekenaarbediener"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-pos/Groepware/Netnuus"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Speletjiesrekenaar"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videospelers en -redigeerders"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Vermaak: Arkade, Bordspel, Strategie ens."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
-"en om ook die web deur te blaai."
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Aaaargivering, emulators, monitorprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Persoonlike finansies"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"'n Grafiese omgewing met gebruikersvriendelike stel applikasies en "
-"werkskermhulpprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Kliëntprogramme vir 'n verkeidenheid protokolle insluitende SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetpoort"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Klank- en videospelers/redigeerders"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ander grafiese werkskerms"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-"Redigeerders. teksverwerkers, instruksiedoppe, lęernutsprogramme, "
-"terminaalprogramme"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programme om u finansies te bestuur, soos GNUcash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Persoonlike Inligtingbestuur."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD Sny"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wetenskaplike werkstasie"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Aborteer"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Geen"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Kies die verstek gebruiker:"
-
-#
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Pas toe/herlees drukkers"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "U kan die opsies vir module %s hier intik."
-
-#~ msgid "mount failed"
-#~ msgstr "heg het gefaal"
-
-#~ msgid "Low"
-#~ msgstr "Laag"
-
-#~ msgid "Medium"
-#~ msgstr "Medium"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "'n Aantal verbetering op heirdie sekuriteitsvlak, die hoof een is meer\n"
-#~ "sekuriteitswaarskuwings en -toetse."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimedia"
-
-#~ msgid "Boot mode"
-#~ msgstr "Herlaaimodus"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Kundige"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux beheer tyd in GMT (Greenwichmeridiaantyd) en vertaal dit dan\n"
-#~ "in u lokale tyd volgends die gekose tydsone."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Konnekteer aan die internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Diskonnekteer van die internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfigureer netwerkkonneksie (LAN or internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Na watter skyf wil u skuif?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Kies die pakkette wat u wil installeer"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome werkstasie"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server. It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache is 'n WWW-bediener.\n"
-#~ "Dit kan HTML-lęers uitstuur en CGI's hanteer"
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-#~ "rekenaarname na IP-adresse toe om te skakel."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Wat is u muistoestel?"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Beskikbare NFS-gedeëlde hulpbronne word gesoek"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Beskikbare NFS-gedeëlde hulpbronne van bediner %s word gesoek."
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Beskikbare SAMBA-gedeëlde hulpbronne word gesoek"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Beskikbare SAMBA-gedeëlde hulpbronnevan bediener %s word gesoek"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Verlaat"
-
-#~ msgid "Removable media"
-#~ msgstr "Verwyderbare media"
-
-#~ msgid "Active"
-#~ msgstr "Aktief"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Nee"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "'n Drukker, model \"%s\", is opgespoor op "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Plaaslikte drukkertoestel"
-
-#~ msgid "Printer Device"
-#~ msgstr "Drukkertoestel:"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Toestel/Lęernaam ontbreek"
-
-#
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Drukkers op eksterne CUPS-bediener(s)"
-
-#
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Drukkers op eksterne CUPS-bediener(s)"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Stelselmode"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Ander"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Wat is u sleutelborduitleg?"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Kliek asb. op 'n partisie"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipe:"
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Korrupte rugsteunlęer"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Stel X op"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Drukkertoestel:"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Kanselleer"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "OK"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Sluit af"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Konneksie word begin..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Konneksie word afgesluit..."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Die stelsel is nou ontkoppel."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Kies die grootte van die installasie"
-
-#~ msgid "Total size: "
-#~ msgstr "Totale grootte: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Wag asb.,"
-
-#~ msgid "Total time "
-#~ msgstr "Totale tyd "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Gebruik bestaande konfigurasie vir X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Watter toestel is die drukker aan gekoppel?\n"
-#~ "(let op dat /dev/lp0 ekwiwalent is aan LPT1:)\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Waarskuwing! Die netwerkkaart is alreeds opgestel. Ek gaan dit "
-#~ "herkonfigureer?"
-
-#~ msgid "New"
-#~ msgstr "Nuut"
-
-#~ msgid "Remote"
-#~ msgstr "Ekstern"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Kliek asb. op 'n partisie"
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr ""
-#~ "Indien bo-gelyste inskrywings nie die nodige inskrywing bevat nie, voeg "
-#~ "dit hier by:"
-
-#~ msgid "Shared resource"
-#~ msgstr "Gedeëlde hulpbron"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Vaagheid (%s). Wees meer presies\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (verstek %s) "
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "U keuse? (Verstek %s tik 'none' vir geen)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "kan nie /etc/sysconfig/autologin oopmaak vir lees nie: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Wil u die netwerk herlaai?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Stem u saam?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ek gaan nou die netwerktoestel herlaai: \n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ek gaan nou die netwerktoestel %s herlaai. Stem u saam?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Indien u spesifiek anders weet, is die gewone keuse \"/dev/hda\"\n"
-#~ "(primęre meester IDE-skyf) of \"/dev/sda\" (eerste SCSI-skyf)."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr ""
-#~ "Konneksie tydlimiet (in sekondes) [ beta, nog nie geďmplementeer nie ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Kon nie \"%s\" die verstek drukker maak nie!"
-
-#
-#~ msgid "Test the mouse here."
-#~ msgstr "Toets die muis hier."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Kies voorkeurtaal vir installasie en stelselgebruik."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Kies die sleutelborduitleg uit die bostaande lys"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Selekteer:\n"
-#~ "\n"
-#~ " - Afgemeet: Indien u vertroud genoeg is met GNU/Linux, kan u die "
-#~ "primęre\n"
-#~ " gebruik van u rekenaar kies. Sien onder vir details.\n"
-#~ "\n"
-#~ " - Kundige: Indien u vlot is in GNU/Linux en 'n hoogs aangepaste "
-#~ "installasie wil\n"
-#~ " doen, kan u die deur die gebruik van u rekenaar te kies.\n"
-#~ " MOET ASB. NIE HIERDIE OPSIE KIES INDIEN U NIE WEET WAT U DOEN NIE."
-
-#, fuzzy
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ " at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ " will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ " or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ " SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ " server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Die verskillende opsies vir u rekenaar se gebruik (indien u \"Afgemeet"
-#~ "\" \n"
-#~ "of \"Kundige\" sou kies) is die volgende:\n"
-#~ "\n"
-#~ " - Normaal: Indien die rekenaar primęr vir daaglikse kantoorgebruik is.\n"
-#~ " Moenie programmeringspakette verwag nie.\n"
-#~ "\n"
-#~ " - Ontwikkeling: Indien die rekenaar vir programontwikkel;ing gebruik "
-#~ "sal\n"
-#~ " word. 'n Volledige stel kompileerders, saamstellers en ontfouters "
-#~ "sal \n"
-#~ " opgesit word.\n"
-#~ "\n"
-#~ " - Bediener: Indien die rekenaar primęr 'n bediener sal wees, hetsy met "
-#~ "NFS,\n"
-#~ " SMB, drukkerbediening, NIS magtiging ens.\n"
-#~ " Moenie vensterstelsels soos KDE en GNOME verwag nie.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "U kan nou die pakketgroepe kies wat u wil installeer of opgradeer.\n"
-#~ "\n"
-#~ "DrakX sal dan kyk of daar genoegsame spasie is vir die volledige "
-#~ "installasie.\n"
-#~ "Indien nie sal u verwittig word. Indien u voortgaan, sal van die minder "
-#~ "belangrike\n"
-#~ "pakkette nie installeer word nie.Heel onder kan u die opsie \"Individuele "
-#~ "pakketkeuses\"\n"
-#~ "kies waarna u deur meer as 'n 1000 pakkette sal moet blaai....."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Indienu al die CDs in die bogenoemde lys het, kliek OK.\n"
-#~ "Indien u geen het nie, kliek Kanselleer.\n"
-#~ "Indien sekere CDs weg is, onselekteer hulle en kliek dan OK."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "U kan nou die opbelopsie invul. Indien u\n"
-#~ "twyfel kry die korrekte inligting van u ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ " * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ " You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ " ask your network administrator.\n"
-#~ "\n"
-#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ " \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Sleutel in:\n"
-#~ "\n"
-#~ " - IP-adres: Indien u dit nie weet nie vra u netwerkadministrateur of "
-#~ "ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Netmasker: \"255.255.255.0\" is gewoonlik 'n goeie keuse. Indien u "
-#~ "twyfel,\n"
-#~ " vra die netwerkadministrateur of ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Outomatiese IP: Indien u netwerk bootp of dhcp protokolle ondersteun, "
-#~ "kies\n"
-#~ " hierdie opsie. In so 'n geval is 'n IP-adresinskrywing nie nodig "
-#~ "nie. Indien u\n"
-#~ " twyfel, vra die netwerkadministrateur of ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Indien u netwerk NIS gebruik, kies \"Gebruik NIS\". Indien u twyfel vra\n"
-#~ "die netwerkadministrateur."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "U kan nou die opbelopsie invul. Indien u\n"
-#~ "twyfel kry die korrekte inligting van u ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Indien u instaanbedieners wil gebruik, stel hulle hier op.. Indien u "
-#~ "twyfel vra\n"
-#~ "die netwerkadministrateur of ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "U kan 'n kriptografiese pakket installeer indien u internetkonneksie reg "
-#~ "opgestel is.\n"
-#~ "Kies eers die spieël waar u die pakket vanaf wil aflaai en kies dan die "
-#~ "pakkette\n"
-#~ "om te installeer.\n"
-#~ "\n"
-#~ "Let wel: U moet 'n spieël en pakkette selekteer n.a.l plaaslike wetgewing."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "U kan nou die 'root' wagwoord voorsien vir u Mandrake Linux stelsel.\n"
-#~ "Die wagworod moet twee keer ingevoer word en te verfiëer dat dit\n"
-#~ "korrek is.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is die administrateur van die stelsel en is die enigste gebruiker\n"
-#~ "wat toegelaat wiord om die stelselkonfigurasie te verander. In dié lig,\n"
-#~ "kies asb. die wagwoord sorgvuldig. Ongemagtigde gebruik van die root\n"
-#~ "rekening kan uitermatiglik nadelig wees vir die integriteit van die\n"
-#~ "stelsel. Die wagwoord moet alfanumeries wees en ten minste 8 karakters\n"
-#~ "lank. MOENIE die wagwoord ęrens neerskryf nie. Moet dit nie te lank of "
-#~ "te\n"
-#~ "ingwikkeld maak nie, u moet dit met min moeite onthou."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "U mag nou een of meer gewone gebruikersrekeninge skep. Dit is in\n"
-#~ "teenstelling met die bevoorregte 'root' rekening. Elke "
-#~ "gebruikersrekening\n"
-#~ "sal oor sy eie voorkeure (grafiese omgewing, programstelling, ens.) en\n"
-#~ "tuisgids (waar hierdie instellings gestoor word) beskik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Derhalwe moet u in die stelsel intkeen met u eie gebruikerskode en slegs\n"
-#~ "'root' gebruik vir administratiewe doeleindes.\n"
-#~ "\n"
-#~ "Skep eerstens 'n rekening vir uself. Selfs indien u die enigste "
-#~ "gebruiker\n"
-#~ "op die stelsel sal wees, moet u NIE as 'root' vir u daaglikse gebruik\n"
-#~ "inteken NIE. 'n Onbruikbare stelsel kan net een tikfout ver weg wees.\n"
-#~ "\n"
-#~ "\n"
-#~ "Derhalwe moet u aanteken met die gebruikerskode wat u hier skep en "
-#~ "'root'\n"
-#~ "net vir admintratiewe doeleindes gebruik."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO en Grub hoof opsies is:\n"
-#~ " - Herlaaitoestel: Stel die naam van die toestel (bv. hardeskyfpartisie\n"
-#~ " wat die herlaaisektor bevat. Indien u spesifiek anders weet\n"
-#~ " kies \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Wagperiode voor verstekbedryfstelsel gelaai word. Kies die syfer in\n"
-#~ " tiendes van 'n sekonde at die herlaaistelsel moet wag.\n"
-#~ " Hierdie is handig op stelsels wat onmiddelik die hardeskyf skop na "
-#~ "die\n"
-#~ " sleutelbord geaktiveer is. Die herlaaistelsel sal nie wag nie indien "
-#~ "die\n"
-#~ " wagperiode nul is.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Videomode: Kies die spesifieke VGA teksmode wat gebruik moet word "
-#~ "met\n"
-#~ " herlaai. Die volgende waardes is beskikbaar:\n"
-#~ " * normaal: selekteer normale 80x25 mode.\n"
-#~ " * syfer: die ooreenstemmende teksmode."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO 'n herlaaiprogram vir SPARC. Dir kan GNU/Linux of enige ander\n"
-#~ "bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word "
-#~ "hierdie\n"
-#~ "bedryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing "
-#~ "maak\n"
-#~ "op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-#~ "\n"
-#~ "\n"
-#~ "U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-#~ "nodige\n"
-#~ "inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om "
-#~ "die\n"
-#~ "betrokke bedryfstelsels te laai."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ " - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO hoofkeuses is:\n"
-#~ " - Herlaaitoestel: Waar wil u die inligting om GNU/Linux te laai plaas? "
-#~ "Die beste is\n"
-#~ "gewoonlik om \"Eerste hardeskyfsektor (MBR)\" te kies.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Wagperiode voor verstekbedryfstelsel gelaai word. Kies die syfer in\n"
-#~ " tiendes van 'n sekonde at die herlaaistelsel moet wag.\n"
-#~ " Hierdie is handig op stelsels wat onmiddelik die hardeskyf skop na "
-#~ "die\n"
-#~ " sleutelbord geaktiveer is. Die herlaaistelsel sal nie wag nie indien "
-#~ "die\n"
-#~ " wagperiode nul is."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Dit is tyd om die X-vensterstelsel op te stel. Hierdie is die kern van\n"
-#~ "die GNU/Linux grafiese omgewing. Vir hierdie doeleindes, moet u 'n "
-#~ "videokaart\n"
-#~ "en monitor kies. Meeste van hierdie stappe is outomaties en u moet net\n"
-#~ "verifiëer of dit korrek is.\n"
-#~ "\n"
-#~ "\n"
-#~ "Na konfigurasie sal X outmaties gelaai word, behalwe as u DrakX "
-#~ "andersins\n"
-#~ "aansę. Indien die stelling u nie pas nie, kom terug en verander so veel\n"
-#~ "keer soos nodig."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Indien iets verkeerd is in die X-konfigurasie, gebruik hierdie opsies om\n"
-#~ "die X-vensterstelsel reg op te stel."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Indien u verkies om 'n grafiese intekenarea te kry, kies \"Ja\", "
-#~ "andersins \"Nee\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "U stelsel gaan nou herlaai.\n"
-#~ "\n"
-#~ "U nuwe Mandrake Linux stelsel sal outomaties laai. Indien u 'n ander\n"
-#~ " bedryfstelsel wil laai, lees die ekstra instruksies noukeurig deur."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skryf /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatteer almal"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Na formatering van alle partisies"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "alle data om hierdie partisies sal verloor word"
-
-#~ msgid "Reload"
-#~ msgstr "Herlaai"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Wil u 'n outoinstallasieskyf maak vir Linux replikasie?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL konfigurasie"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-#~ "op te stel nie; drukkers wod outomaties bespeur.\n"
-#~ "Indien u twyfel, kies \"Eksterne CUPS-bediener\"."
-
-#~ msgid "Remote queue"
-#~ msgstr "Eksterne drukkertou"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Eksterne tounaam ontbreek!"
-
-#~ msgid "Command line"
-#~ msgstr "Instruksielyn"
-
-#~ msgid "Modify printer"
-#~ msgstr "Verander drukker"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Netwerkmonitor"
-
-#~ msgid "Profile "
-#~ msgstr "Profiel"
-
-#~ msgid "Connection Time: "
-#~ msgstr "Konneksietyd"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Internetkonneksie"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Internetdiskonneksie"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Diskonnekteer van die internet het misluk."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Diskonneksie van die internet sukssevol"
-
-#~ msgid "Connection complete."
-#~ msgstr "Konneksie suksesvol"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Verstek loopvlak"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Konfigurasielęerinhoud is onverstaanbaar"
-
-#~ msgid "Adapter"
-#~ msgstr "Toestel"
-
-#~ msgid "Disable network"
-#~ msgstr "Sper netwerkstelsel"
-
-#~ msgid "Enable network"
-#~ msgstr "Aktiveer netwerk"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (of ADSL) konneksie"
-
-#~ msgid "Choose"
-#~ msgstr "kies"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "U kan die URI, om die drukker via CUPS te gebruik, direk spesifiseer"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ja, druk ASCII toetsbladsy"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ja, druk die PostScript toetsbladsy"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papiergrootte"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Stoot papier uit na voltooiing?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint-dryweropsies"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kleurdiepte opsies"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Druk teks as PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Korrigeer trapsgewyse teks?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Aantal bladsye per uitsetblad?"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Regs/Links kantlyne in punte (1/72 van 'n duim)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Bo/Onder kantlyne in punte (1/72 van 'n duim)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Ekstra GhostScriptopsies"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Ekstra teksopsies"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Omgekeerde bladsyorde"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Kies eksterne drukkerkonneksie"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Elke drukker benodig 'n naam (bv. lp)\n"
-#~ "Ander parameters soos 'n beskrywing en 'n ligging kan ook gegee word.\n"
-#~ "Wat is die drukker se naam en wat is die konneksietipe?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Elke drukkertou (waar drukstukke heengaan) het 'n naam nodig \n"
-#~ "(baie keer 'lp') and 'n gekoppelde spoelgids. Watter naam en\n"
-#~ "spoelgids moet gebruik word?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Tounaam"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spoelgids"
-
-#~ msgid "Disable"
-#~ msgstr "Deaktiveer"
-
-#~ msgid "Enable"
-#~ msgstr "Aktiveer"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Om 'n veiliger stelsel te bou, moet u \"Gebruik skadulęer\" \n"
-#~ "en \"Gebruik MD5 wagwoorde\" kies."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Indien u netwerk NIS wil gebruik, kies \"Gebruik NIS\" hier. Indien u "
-#~ "twyfel vra\n"
-#~ "die sysadmin.."
-
-#~ msgid "yellow pages"
-#~ msgstr "geelbladsye"
-
-#~ msgid "Light configuration"
-#~ msgstr "Ligte konfigurasie"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Voorsiener DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Voorsiener DNS 2"
-
-#, fuzzy
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Wil u nou aan die internet konnekteer?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Selekteer lOer"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Konfigureer internetkonneksie"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Stel X op"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Stel netwerk op"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Hierdie skrip laai de nodige modules vir 'n USB-muis."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nou dat u internetkonfigurasie opgestel is,\n"
-#~ "moet u die rekenaar opstel om dit te deel.\n"
-#~ "LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-#~ "stel.\n"
-#~ "\n"
-#~ "Wil u internetdeling opstel?\n"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Outomatiese afhanklikhede"
-
-#, fuzzy
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Stel X op"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Maar 'n herlaaiskyf"
-
-#~ msgid "Choice"
-#~ msgstr "Keuse"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ " chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ " you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ " your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ " specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ " present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ " typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ " select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ " should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "U kan nou 'n paar diverse opsies vir u stelsel kies.\n"
-#~ "\n"
-#~ " - Optimeer hardeskyf. Hierdie kan hardeskyfwerksverrigting verbeter, "
-#~ "maar is net\n"
-#~ " vir kundige gebruikers bedoel. Sekere gebroke koppelvlakke kan data "
-#~ "ruďneer.\n"
-#~ " Die bedryfstelsel kern het 'n swartlys van hardeskywe, maar indien u "
-#~ "onaangename\n"
-#~ " verrassings wil voorkom los hierdie opsie uit.\n"
-#~ "\n"
-#~ " - Sekuriteitsvlak: Lees die handleiding vir volledigheid, maar in "
-#~ "kort:\n"
-#~ " Kies \"Medium\" indien u twyfel. Vir 'n hoogs veilige stelsel kies "
-#~ "\"Paranoďes\",\n"
-#~ " maar pasop: OP HIERDIE VLAK KLAN SELFS NIE 'ROOT' OP DIE KONSOLE\n"
-#~ " AANTEKEN NIE. Vir 'root' toegang moet 'n gewone gebruiker eers "
-#~ "aanteken en dan\n"
-#~ " \"su\". Dit is uitsluitlik vir 'n bediener bedoel.\n"
-#~ "\n"
-#~ " - Presiese geheuegrootte: Daar is geen ongelukkig standaard metode om "
-#~ "die geheuegrootte\n"
-#~ " uit die BIOS te bepaal nie. Soms sal Linux nie die grootte korrek "
-#~ "bepaal nie. In hierdie geval\n"
-#~ " kan die korrekte grootte her gegee word. Let daarop dat 'n verskil "
-#~ "van 2-4MB normaal is.\n"
-#~ "\n"
-#~ " - Outohegting van verwyderbare media: Indien u nie elke keer die "
-#~ "hegting per intik wil doen\n"
-#~ " nie (van CDROMs, floppies, ZIpaandrywers ens.), selekteer hierdie "
-#~ "opsie.\n"
-#~ "\n"
-#~ " - NumLock: Indien u NumLock wil aansit by herlaaityd, selekteer hierdie "
-#~ "opsie. Dit sal\n"
-#~ " nie noodwendig NumLock onder X aansit nie."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Arbitręre items"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Diverse vrae"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "U kan nie supermount in hoë sekuriteitsvlak gebruik nie."
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Warskuwing: IN HIERDIE SEKURITEITSVLAK, kan ROOT nie by die KONSOLE "
-#~ "AANTEKEN nie.\n"
-#~ "OM 'root' te wees moet u eers as 'n gewone gebruiker aanteken en dan 'su'."
-#~ "Hierdie is spesifiek vir bedienergebruik. U is gewaarsku!"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Wees versigtig, met NumLock aan sal heelwat sleutels as syfers eerder as "
-#~ "karakters na vore kom. (Bv 'n 'p' mag dalk '6' wees)"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Eerste DNS bediener"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Tweede DNS bediener"
-
-#~ msgid "loopback"
-#~ msgstr "teruglus"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Watter herlaaistelsel(s) verlang u?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Outoinstallasieskyf"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Soekj vir 'n modem?"
-
-#~ msgid "Configure local network"
-#~ msgstr "Stel netwerk op"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Plaaslike netwerk is alreeds opgestel: Wil u?"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Konfigureer tydsone"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(kan data korrupteer)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Aansit van NumLock met herlaai"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Bevestig wagwoord"
-
-#~ msgid "default"
-#~ msgstr "verstek"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Waarvoor word u stelsel gebruik?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Kies die grootte van die installasie"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Gebruik diskdrake"
-
-#
-#~ msgid "Customized"
-#~ msgstr "Gespesialiseerde"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Is u 'n kundige? U sal sal toegelaat word om kragtige, maar\n"
-#~ "gevaarlike keuses uit te oefen\n"
-#~ "\n"
-#~ "U sal vrae gevra word soos: \"Gebruik skaduwagwoorde?\"\n"
-#~ "Is u reg vir sulke vrae?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Gebruik skadulęer"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Gebruik MD5 wagwoorde"
-
-#~ msgid "Search"
-#~ msgstr "Soek"
-
-#~ msgid "Package"
-#~ msgstr "Pakket"
-
-#~ msgid "Tree"
-#~ msgstr "Boom"
-
-#~ msgid "Sort by"
-#~ msgstr "Gesorteer volgens"
-
-#~ msgid "Category"
-#~ msgstr "Kategorie"
-
-#~ msgid "Installed packages"
-#~ msgstr "Installeerde pakkette"
-
-#~ msgid "Available packages"
-#~ msgstr "Beskikbare pakkette"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Wys net eindnodes"
-
-#~ msgid "Expand all"
-#~ msgstr "Maak boom oop"
-
-#~ msgid "Collapse all"
-#~ msgstr "Maak boom toe"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Voeg pakketareas by"
-
-#~ msgid "Update location"
-#~ msgstr "Dateer ligging op"
-
-#~ msgid "Find Package"
-#~ msgstr "Soek pakket"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Soek pakket met lęer"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Skakel tussen installeerde en beskikbare"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Afhanklikhede word getoets"
-
-#
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Die volgende pakkette gaan verwyder word"
-
-#~ msgid "Regexp"
-#~ msgstr "Regex"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Watter pakket soek vir"
-
-#~ msgid "No match"
-#~ msgstr "Geen treffer"
-
-#~ msgid "No more match"
-#~ msgstr "Niks meer treffers nie"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake is in lae-geheue opstelling.\n"
-#~ "Ek gaan rpmdrake herlaai om soektogte toe te laat."
-
-#
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Watter lęer verlang u?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Wat soek vir?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Gee 'n (engelse) naam (bv. 'extra')"
-
-#~ msgid "Directory"
-#~ msgstr "Lęergids"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Geen cdrom beskikbaar nie (niks in /mnt/cdrom nie)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL van die lęergids met die RPM's"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Vir FTP en HTTP, moet die pad vir die hdlist gegee word\n"
-#~ "Dit moet relatief tot bg. URL wees."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Voorsien asb. die volgende inligting"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s is lareeds in gebruik"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Die RPM's se basis word opgedateer"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Inskrywing %s gaan verwyder word"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Eindnodes word gesoek"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Soek van eindnodes neem 'n tydjie"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Ek het 'n ISDN-kaart gevind\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Ander lande"
-
-#
-#~ msgid "In which country are you located ?"
-#~ msgstr "In watter land is u?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Indien u ADSL-modem 'n Alcatel is, kies Alcatel, andersins ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "moenie pppoe gebruik nie"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (belangrik)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (baie oulik)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (oulik)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-
-#~ msgid "Czech"
-#~ msgstr "Tseggies"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaaks"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Kon nie ipchains RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Kon nie dhcp RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Kon nie linuxconf RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Kon nie bind RPM m.b.v. urpmi installeer nie."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Kon nie caching-nameserver RPM m.b.v. urpmi installeer nie. "
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Herkonfigureer plaaslike netwerk"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr "U rekenaar is opgestel om sy internet konneksie te deel.\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Internetkonneksiedeling is ontsper.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Konnekteer aan die internet met gewone modem"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Konnekteer aan die internet met ISDN"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Konnekteer aan die internet met DSL (of ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Konnekteer aan die internet met kabel"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Tyd, in sekondes, van onaktiwiteit voor diskonneksie.\n"
-#~ "Los oop om dié funksie te sper."
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Duitsland (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Wat wil u doen?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Installasie/Redding"
-
-#~ msgid "Rescue"
-#~ msgstr "Redding"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Watter partisietipe verlang u?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ " - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Selekteer:\n"
-#~ "\n"
-#~ " - Afgemeet: Indien u vertroud genoeg is met GNU/Linux, kan u die "
-#~ "primęre\n"
-#~ " gebruik van u rekenaar kies. Sien onder vir details.\n"
-#~ "\n"
-#~ " - Kundige: Indien u vlot is in GNU/Linux en 'n hoogs aangepaste "
-#~ "installasie wil\n"
-#~ " doen, kan u die deur die gebruik van u rekenaar te kies.\n"
-#~ " MOET ASB. NIE HIERDIE OPSIE KIES INDIEN U NIE WEET WAT U DOEN NIE."
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m to set the mount point\n"
-#~ msgstr ""
-#~ "U kan nou kies watter partisie(s) gebruik kan word om Mandrake Linux\n"
-#~ "op te installeer indien hulle reeds bestaan (geskep uit 'n vorige "
-#~ "installasie,\n"
-#~ "of met 'n ander partisieprogram). In ander gevalle moet die partisies nog "
-#~ "geskep\n"
-#~ "word. Hierdie operasie bestan uit die logiese verdeling van die hardeskyf "
-#~ "in\n"
-#~ "aparte bruikbare areas\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u nuwe partisies moet skep, gebruik \"Outo-allokasie\" om "
-#~ "outomaties\n"
-#~ "partisies vir Linux te skep. U kan die skyf vir partisionering selekteer "
-#~ "deur\n"
-#~ "op \"hda\" te kliek vir die eerste IDE hardeskyf, hdb vir die tweede of "
-#~ "\"sda\"\n"
-#~ "vir die eerste SCSI skyf ens.\n"
-#~ "\n"
-#~ "\n"
-#~ "Twee algemene partisies is die \"root\" partisie (/), wat die wortel is\n"
-#~ "van die lęergidsstelsel, en /boot, wat die nodige lęers bevat om die\n"
-#~ "bedryfstelsel aan die gang te kry wanneer die rekenaar aangesit word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Omdat die gevolge van hierdie proses onomkeerbaar is, kan partisionering "
-#~ "baie\n"
-#~ "intimiderend en stresvol vir die onervare gebruiker wees. DiskDrake maak "
-#~ "dié\n"
-#~ "proses heelwat makliker. Lees die dokumentasie en neem u tyd voor u "
-#~ "voortgaan.\n"
-#~ "\n"
-#~ "\n"
-#~ "U kan enige opsie gebruik deur die sleutelbord te gebruik. Navigeer deur "
-#~ "diepartisies met\n"
-#~ "Tab en die pyltjies. Wanneer 'n partisie gekies is, gebruik:\n"
-#~ "\n"
-#~ "- Ctrl-c om 'n partisie te skep (wanneer 'n leë partisie gekies is)\n"
-#~ "\n"
-#~ "- Ctrl-d om 'n partisie uit te vee\n"
-#~ "\n"
-#~ "- Ctrl-m om 'n partisie te heg\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Enige partisies wat nuut geskep is, moet eers formateer word voor "
-#~ "gebruik.\n"
-#~ "(Formateering beteken die skep van 'n lOerstelsel). U kan nou kies om "
-#~ "ook\n"
-#~ "bestaande partisies te herformateer en die data daarop te vernietig.\n"
-#~ "NOTA: Dit is nie nodig om alle bestaande partisies te herformateer nie,\n"
-#~ "veral indien daar data op is wat u wil hou. 'n Tipiese voorbeeld is /home."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Die gekose pakette gaan nou installeer word. Hierdie proses\n"
-#~ "sal 'n paar minute neem. Indien u 'n opgradering gekies, kan dit\n"
-#~ "nog langer neem voordat die opgradering begin."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Indien DrakX nie u muis kon vind nie, of as u wil sien\n"
-#~ "wat gedoen is, sal u moet die bg. lys van muistoestelle gepresenteer\n"
-#~ "word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u met DrakX saamstem, spring na die afdeling wat u\n"
-#~ "verlang deur op die kierkaart links te kliek. Andersins kies\n"
-#~ "'n muistoetsel in die kieskaart wat u dink die beste klop met die\n"
-#~ "muis wat u het.\n"
-#~ "\n"
-#~ "In geval van 'n seriaalmuis, moet u ook vir DrakX die seriaalpoort\n"
-#~ "gee."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Hierdie afdeling is vir die konfigurasie van 'n lokaalareanetwerk\n"
-#~ "of 'n modem.\n"
-#~ "\n"
-#~ "Kies \"LAN\" en DrakX sal probeer om 'n Ethernetkaart in u rekenaar\n"
-#~ "te vind. PCI-kaarte sal heelwaarskynlik outomaties gevind en\n"
-#~ "inisialiseer word. Indien u 'n ISA-kaart het sal daar 'n kieslys\n"
-#~ "vertoon word waaruit u dan u kaart moet selekteer.\n"
-#~ "\n"
-#~ "\n"
-#~ "indien u Mandrake Linux installeer op 'n stelsel wat deel is van 'n\n"
-#~ "bestaande netwerk, sal due netwerk administrateur u alreeds met die\n"
-#~ "nodige inligting (IP adres, netmasker en rekenaarnaam) voorsien het.\n"
-#~ "Indien u 'n privaat netwerk opstel (sso by die huis), dan moet u die\n"
-#~ "adresse kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kies \"Uitbel met Modem\" en die internetkonneksie vir 'n modem\n"
-#~ "sal opgestel word. DrakX sal u modem probeer bepaal. Indien dié faal\n"
-#~ "sal u die modem en korrekte seriaalpoort moet selekteer."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "GNU/Linux kan verskeie drukkers gebruik. Elkeen van hierdie tipes\n"
-#~ "verlang 'n ander opstelling. Let asb. daarop dat die verstek drukkernaam "
-#~ "'lp' is.\n"
-#~ "U moet so 'n drukker skep. U kan egter addisionele name bysit deur dit "
-#~ "met die '|' karakterte skei.\n"
-#~ "Derhalwe kan u dus die drukker 'n meer betekenisvolle naam ook toeken.\n"
-#~ "Die drukker met 'lp' in die naam sal die verstek drukker wees.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u drukker direk aan die rekenaar gekoppel is, selekteer\n"
-#~ "\"Lokale Drukker\". U moet dan die korrekte poort uitwys\n"
-#~ "en die gepaslike filter selekteer.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u 'n drukker om 'n ander Unix-rekenaar wil gebruik, kies\n"
-#~ "\"Eksterne lpd\". In hierdie geval moet u die naam van die drukkertou\n"
-#~ "op die ander rekenaar ken.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u toegang tot 'n SMB drukker (op 'n Windows-rekenaar) verlang,\n"
-#~ "moet u die SMB/NETBIOS naam (nie TCP/IP-naam nie) ken en moontlik ook "
-#~ "die\n"
-#~ "IP-adres. Daarby moet u ook 'n gebruikerskode, werkgroep en wagwoord en "
-#~ "die\n"
-#~ "drukkernaam voorsien. Dieselfde geld vir 'n Netware-drukker, behalwe dat "
-#~ "u\n"
-#~ "die werkgroep hoef te voorsien nie."
-
-# ../help.pm_.c:240 ../help.pm_.c:481 msgid ""
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Dit word sterk aanbeveel dat u \"Ja\" antwoord. Indien u Windows sou\n"
-#~ "herinstalleer, sal dit die herlaaisektor oorskryf. Indien u die die "
-#~ "herlaaiskyf\n"
-#~ "gemaak het nie, sal u nie weer in GNU/Linux kan inkom nie."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Draai u wiel!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Vergeet van die veranderinge?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Wat is u muistipe?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "OUtomatiese resolusies"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Ek gaan nou probeer m die beskikbare resolusies te kry.\n"
-#~ "Die skerm sal 'n paar maal flits...\n"
-#~ "U kan die skerm afsit indien u wil, ek sal biep wanneer ek klaar is"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Ek kan probeer om al die beskikbare resolusies te kry (bv. 800x600).\n"
-#~ "Soms kan die rekenaar ophang.\n"
-#~ "Wil u probeer?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Geen geldige modes was gevind nie\n"
-#~ "Probeer 'n ander videokaart of monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Outomatiese resolusie soektog"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "DHCP-kliënt"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB-muis"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB-muis (2 knoppe)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB-muis (3+ knoppe)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB-muis"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB-muis (2 knoppe)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB-muis (3+ knoppe)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Busmuis"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft busmuis"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech busmuis"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Muis (3 knoppe of meer)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A of beter (seriaal)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (seriaal)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (seriaal)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (seriaal)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generiese Muis (seriaal)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft aanpasbaar (seriaal)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Generiese 3-knopmuis (seriaal)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (seriaal)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Ek moet u netwerkkaart konfigureer om aan die internet te konnekteer."
-
-#~ msgid "nfs mount failed"
-#~ msgstr "NFS heg het gefaal"
-
-#~ msgid "Socket"
-#~ msgstr "Sok"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Kriptografie"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX sal konfigurasielęers maak vir beide XFree 3.3 en XFree 4.0.\n"
-#~ "By verstek sal die 4.0 bediener gebruik word indien u videokaart "
-#~ "ondersteun. word\n"
-#~ "\n"
-#~ "Wil u XFree 3.3 behou?"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Stel LAN op"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Moenie netwerk opstel nie"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Wil u die netwerk vir u stelsel opstel?"
-
-#~ msgid "Show less"
-#~ msgstr "Vertoon minder"
-
-#~ msgid "Show more"
-#~ msgstr "Vertoon meer"
-
-#, fuzzy
-#~ msgid "tie"
-#~ msgstr "koppel"
-
-#~ msgid "brunette"
-#~ msgstr "brunette"
-
-#~ msgid "girl"
-#~ msgstr "meisie"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondine"
-
-#, fuzzy
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Wat is u sleutelborduitleg?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Soek PCMCIA-kaarte?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Soek vir %s-toestelle?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Wil u die opbelkonneksie (modem) konfigureer?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Soek vir PCI-toestelle?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Wortelpartisisie word gesoek."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr ""
-#~ "%s: Hierdie is nie 'n wortellęerstelsel nie, kies asb. 'n ander een."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Watter partisie moet u wortelpartisie wees?"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "U het geen Windows-partisies nie!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "U het nie genoeg spasie vir Lnx4win nie."
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Welkom by %s die bedryfstelselkeuseprogram!\n"
-#~ "\n"
-#~ "Om die moontlikhede te vertoon, druk <TAB>.\n"
-#~ "\n"
-#~ "Om 'n spesifieke een te laai, tik die nodige naam en druk <ENTER> of wag\n"
-#~ "%ds en die verstek bedryfstelsel sal laai.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Welkom by %s die bedryfstelselkeuseprogram!\n"
-#~ "\n"
-#~ "Om die moontlikhede te vertoon, druk <TAB>.\n"
-#~ "\n"
-#~ "Om 'n spesifieke een te laai, tik die nodige naam en druk <ENTER> of wag\n"
-#~ "%ds en die verstek bedryfstelsel sal laai.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO hoofopsies"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Hier is die huidige SILO-inskrywings\n"
-#~ "U kan byvoeg or verwyder soos nodig."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Hierdie etiket is alreeds in gebruik"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO installasie het gefaal a.g.v. hierdie fout: "
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
-#~ "to use, it will insert it (them) automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX will probeer om eers te kyk vir een of meer bekende PCI\n"
-#~ "SCSI kaarte. Indien iets gevind word, en die drywers daarvoor\n"
-#~ "bekend is, sal dit outomaties bygevoeg word.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u 'n ISA SCSI kaart het, of 'n onbekende PCI SCSI kaart, of\n"
-#~ "geen SCSI kaart nie, sa; u gevra word of daar enige SCSI kaarte is.\n"
-#~ "Indien daar geen is nie, antwoord \"Nee\". Indien daar wel is, antwoord\n"
-#~ "\"Ja\" en 'n lys van kaarte sal gegee word waaruit u moet kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Na seleksie van die drywer, sal DrakX of vra vir opsies. Probeer eers\n"
-#~ "dat die drywer die hardeware ondervra; dit werk gewoonlik.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien nie, moenie die dokumentasie van u hardeware vergeet nie; ook nie\n"
-#~ "enige inligting van Windows (indien u dit gennstalleer het). Hierdie is\n"
-#~ "opsies wat u die drywer moet verskaf."
-
-#~ msgid "Shutting down"
-#~ msgstr "Stelselafsluiting"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
deleted file mode 100644
index bad02e711..000000000
--- a/perl-install/share/po/ar.po
+++ /dev/null
@@ -1,10269 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 2000 Free Software Foundation, Inc.
-# Djaghlouli Kamel <djkamel@chez.com>, 2000.
-# Mohammed Gamal <f2c2001@yahoo.com>, 2002
-# Boujaj Mostapha Ibrahim <mboujaj@yahoo.de>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-08 02:00GMT\n"
-"Last-Translator: Mohammed Gamal <f2c2001@yahoo.com>\n"
-"Language-Team: ARABIC <ar@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "اعداد كل الرؤوس بشكل مستقل"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "استخدام امتداد Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "قم بإعداد البطاقة \"%s\" فقط (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "إعداد متعدد الرؤوس"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"نظامك يدعم الإعداد متعدد الرؤوس.\n"
-"ماذا تريد أن تفعل؟"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "بطاقة الشاشة"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "اختر بطاقة شاشة"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "إختر خادم X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "خادم X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "إختر مشغل X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "مشغل X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "أي اعداد لـXFree تريد؟"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"يمكن لبطاقتك الحصول على دعم للتسريع ثلاثي الأبعاد لكن فقط مع XFree %s.\n"
-"بطاقتك مدعومة عن طريق XFree %s التي يمكن أن تكون مدعومة بشل أفضل في الوضع "
-"ثنائي الأبعاد."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "يمكن لبطاقتك الحصول على دعم للتسريع ثلاثي الأبعاد مع XFree %s"
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s مع تسريع ثلاثي الأبعاد"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"يمكن لبطاقتك التمتع بدعم للرسوم ثلاثية الأبعاد مع XFree %s, \n"
-"لاحظ أن هذا الدعم تجريبي و قد يتسبب في ايقاف جهازك."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s مع دعم تجريبي للرسوم ثلاثية الأبعاد"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"يمكن لبطاقتك التمتع بدعم للتسريع ثلاثي الأبعاد لكن فقط مع XFree %s, \n"
-"لاحظ أن هذا الدعم تجريبي و قد يتسبب في ايقاف جهازك.\n"
-"بطاقتك مدعومة عن طريق XFree %s التي يمكن أن تكون مدعومة بشكل أفضل في وضعية "
-"الرسوم ثنائية الأبعاد."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (مشغل عرض التثبيت)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "ؼؚداد XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "إختر حجم ذاكرة بطاقة الشاشة"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "إختر خيارات الخادم"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "ؼ؎تع شاش؊"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "الشاشة"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"المعاملان المهمان جدا هما نسبة الإنعاش الأفقي, و هي النسبة التي\n"
-"يتم فيها انعاش الشاشة كاملة, و الأهم هو نسبة التزامن الأفقي\n"
-"و التي في خلالها يتم عرض خطوط المسح.\n"
-"\n"
-"من *المهم جدا* أن لا تحدد نوع شاشة مع متوسط تزامن\n"
-"أكبر من مقدرة شاشتك لأنك بهذا قد تدمر شاشتك.\n"
-" اذا لم تكن متأكدا يمكنك اختيار اعدادات عادية."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "نسبة الإنعاش الأفقي"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "نسبة الإنعاش الرأسي"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "الشاشة غير معدّة"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "لم يتم اعداد بطاقة الشاشة حتى الآن"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "ام يتم اعداد دقة العرض حتى الآن"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "هل تريد تجربة الإعداد؟"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "تحذير: اختبار بطاقة العرض هذه قد يتسب في ايقاف جهازك"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "اختبار الإعداد"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"حاول تغيير بعض المعاملات"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "ظهر خطأ:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "المغادرة في %d ثوان"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "هل هذا هو الضبط الصحيح؟"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "ظهر خطأ, حاول تغيير بعض الماملات"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "دقة العرض"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "اختر دقة العرض و عمق الألوام"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "بطاقة الشاشة: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "خادم XFree86 :%s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "أك؍ع"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "موافق"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "وضعية الخبير"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "اظهار الكل"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "دقة العرض"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "لوحة المفاتيح: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "نوع الفأرة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "جهاز الفأرة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "الشاشة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "تزامن الشاشة الأفقي: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "انعاش الشاشة الرأسي: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "بطاقة الشاشة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "معرف بطاقة الشاشة: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ذاكرة بطاقة الشاشة: %s كيلوبايت\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "عمق الألوان: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "دقة العرض: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "خادم XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "مشغل XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "جاري تجهيز تهيئة X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "ماذا تريد أن تفعل؟"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "تغيير الشاشة"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "تغيير بطاقة الشاشة"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "تغيير خيارات الخادم"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "تغيير دقة العرض"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "عرض المعلومات"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "اختبر مرة أخرى"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "؎عو؏"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"هل تريد حفظ التغييرات؟\n"
-"الإعداد الحالي هو:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X عند بدء التشغيل"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"يمكنني جعل جهازك يبدأ X بشكل آلي بعد الإقلاع.\n"
-"هل تريد X أن بيدأ بعد إعادة تشغيل جهازك؟"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "يرجى اعادة تسجيل الدخول الى %s لتنشيط التغييرات"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "يرجى تسجيل الخروج ثم استخدم Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 لون )8 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ألف لون )15 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ألف لون )16 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 مليون لون )24 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 بليون لون )32 بت("
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 كيلوبايت"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 كيلوبايت"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 ميغابايت"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 ميغابايت أو أكثر"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency that can do 1280x1024 at 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor that can do 1600x1200 at 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor that can do 1600x1200 at 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "القطاع اول من تجزئة الإقلاع"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "القطاع الأول من القرص (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "تثبيت SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "أين تريد تثبيت محمّل الإقلاع؟"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "تثبيت LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO مع قائمة نصية"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO مع قائمة رسومية"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "الإقلاع من DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "خيارات محمّل الإقلاع الرئيسية"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "محمّل الإقلاع المُستخدم"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "تثبيت محمل الإقلاع"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "جهاز الإقلاع"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA )لا يعمل مع أنظمة الـBIOS القديمة("
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "مدمج"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "مدمج"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "وضعية الفيدية"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "توقيت ما قبل اقلاع الصورة الافتراضية"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "???§?????????Š ?§???³?????????¹"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "كلمة المرور )ثانيةً("
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "تشديد خيارات سطر الأوامر"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "تشديد"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "قم بتنظيف /tmp عند كل إقلاع"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "حجم الذاكرة الدقيق عند الحاجة )تم ايجاد %d ميغابايت("
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "تمكين التشكيلات المتعددة"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "اكتب حجم الذاكرة بالميغابايت"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "خيار ``تشديد خيارات سطر الأوامر`` بدون قائدة من دون كلمة مرور"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "رجاء جاول مرة أخرى"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "كلمات المرور غير متطابقة"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "رسالة Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "الوقت الأقصى لإقلاع النواة"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "تمكين الإقلاع من القرص المدمج؟"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "تمكين اقلاع OF؟"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "نظام التشغيل الافتراضي؟"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ها هنا المخلات المختلفة.\n"
-"يمكنك اضافة مدخلات أخرى أو تغيير الموجودين."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "ؼ؜اف؊"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "انتهى"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "تعديل"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ما نوع المدخل الذي تريد اضافته؟"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "لينكس"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "نظام آخر (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "نظام آخر (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "نظام آخر (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "ؾوع؊"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "الجذر"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "الحاق"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "للقراءة و الكتابة"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "الجدول"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "عنوان"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "الإفتراضي"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "حجم Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "لا فيديو"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "ازل المدخل"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "غير مسموح بالعلامات الفارغة"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "يجب أن تحدد صورة النواة"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "يجب عليك تحديد تقسيم جذر"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "هذه العلامة مستخدمة مسبقا"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "تم ايجاد %s %s واجهات"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "هل عندك واحدة أخرى؟"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "هل لديك أي واجهات %s؟"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "لا"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "نعم"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "عرض معلومات العتاد"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "جاري تثبيت مشغل %s للبطاقة %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr ")الوحدة %s("
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "أي مشغل %s يجب أن استخدمه؟"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"في بعض الأحيان يحتاج مشغل %s معلومات اضافية لكي يعمل\n"
-"بشكل صحيح, الا أنه يمكنه العمل جيدا بدونها. هل تريد تحديد\n"
-"خيارات اضافية له أو تسمح للمشغل بالتحقق في جهازك\n"
-"عن المعلومات التي سيحتاجها؟ في بعض الأحيان, قد يتسبب التحقق في تعليق الجهاز, "
-"لكن\n"
-"لا يجب أن يتسبب ذلك في أي مشاكل."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "تحقق آلي"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "حدد الخيارات"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"يمكنك الآن اعطاء الخيارات للوحدة %s.\n"
-"الخيارات في هيئة ``name=value name2=value2 ...'' \n"
-"مثلا, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "خيارات الوحدة:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"فشل تحميل الوحدة %s.\n"
-"هل تريد المحاولة ثانية بمعاملات أخرى؟"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "الوصول الى برامج X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "الوصول الى أدوات rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "اسمح بـ\"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "الوصول الى ملفات الإدارة"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(تم اضافة %s مسبقا)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "كلمة المرور هذه بسيطة جدا"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "رجاءً قم بإعطاء اسم مستخدم"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "اسم المستخدم يجب أن يحتوي فقط على الحروف الصغيرة, الأرقام, `-' و `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "اسم المستخدم مُضاف مسبقا"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "اضف مستخدم"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"أدخل مستخدم\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "وافق على المستخدم"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "الاسم الحقيقي"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "اسم المستخدم"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "الغلاف"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "أيقونة"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "دخول آلي"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"يمكنني اعداد جهازك لتسجيل الدخول آليل لمستخدم ما.\n"
-"هل تريد استخدام هذه الميزة؟"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "اختر المستخدم الافتراضي:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "اختر مدير النوافذ الذي سيتم تشغيله:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "رجاء اختر لغة الاستخدام."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "يمكنكن اختيار لغات أخرى و التي ستكون متوفرة بعد التثبيت"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "الكل"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "اسمح لكل المستخدمين"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "مخصص"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "لا مشاركة"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "الحزمة %s يجب أن تُثبّت. هل تريد تثبيتها؟"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "يمكنك التصدير باستخدام NFS أو Samba. أي منهما تريد"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "الحزمة الضرورية %s مفقودة"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "إلغاء"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "شغّل userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"المشاركة لكل مستخدم تستخدم المجموعة \"fileshare\".\n"
-"يمكنك أن تستخدم userdrake لإضافة مستخدم في هذه المجموعة."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "مرحبا بالمخترقين"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "فقير"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "القياسي"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "مرتفع"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "مرتفع أكثر"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "مرتفع جدا"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "اختر مستوى الأمن"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "مستوى الأمن"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "إستخدم libsafe للملقمات"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "لا توجد مساحو كافية في /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "سطح المكتب"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "يمكنك تثبيت محمّل الإقلاع على التجزئة %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "لا توجد مساعدة لهذا حتى الآن.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "اعداد أسلوب الإقلاع"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_ملف"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/ملف/_خروج"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>ŘŽ"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "شاشة NewStyle التصنيفية"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "شاش؊ NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "شاشة تقليدية"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "شاشة Gtk+ التقليدية"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "شغّل Aurora عند الإقلاع"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "و؜ؚ Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "و؜ؚ Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"أنت تستخدم %s كمدير اقلاع حاليا.\n"
-"اضغط على تهيئة لتشغيل معالج الإعداد"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "ؼؚداد"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "وضع النظام"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "شغّل X-Window عند بدء التشغيل"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "لا, لا أريد دخولا أليا"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "نعم, أريد دخولا آليا مع هذا )المستخدم, سطح المكتب("
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "موافق"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "لم يمكن فتح /etc/inittab للقراءة: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "غيغابايت"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "كيلوبايا"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "م.ب"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "تيرابايت"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d دقائق"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "دقيقة واحدة"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ثوان"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "لا يمكنني غمل لقطات للشاشة قبل التجزئة"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "ستكون لقطات الشاشة موجودة بعد التثبيت في %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "فرنسا"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "كوستاريكا"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "بلجيكا"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "جمهورية التشيك"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "ألمانيا"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "اليونان"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "النرويج"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "السويد"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "هولندا"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "إيطاليا"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "النمسا"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "الولايات المتحدة"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "رجاء قم بعمل نسخة احتياطية من بياناتك أولا"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "اقرأ جيدا!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"اذا كنت تريد استخدام aboot, فلا تنسى أن تترك مساحة فارغة في\n"
-"بداية القرص (2048 قطاعات كافية)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "؎ءأ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "المعالج"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "ا؎تع حد؍ا"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"لديك تجزئة FAT واحدة كبيرة\n"
-")يستخدم عامة عن طريق Microsoft DOS/Windows(.\n"
-"اقترح أن تغير حجم هذه التجزئة\n"
-")اضغط عليها ثم اختر \"تغيير الحجم\"("
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "فضلا اضغط على تجزئة"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "تفاصيل"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "التبديل"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "فاعغ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "أخرى"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "أنواع أنظمة الملفات:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "عمل تجزئة"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "النوع"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "استخدم ``%s'' بدلا من ذلك"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "إلغاء"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "استخدم ``ازالة التجهيز'' أولا"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "بعد تغيير نوع التجزئة %s, فإنك ستسخر كل البيانات على التجزئة"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "ؼ؎تع ت؏ز،؊"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "ؼ؎تع شاش؊"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "؎عو؏"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "النتقال الى وضعية الخبير"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "الانتقال الى الوضع العادي"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "تعا؏ؚ"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "هل تريد الاكمال على أي حال؟"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "الخروج بدون الحفظ"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "هل تريد الخروج بدون كتابة جدول التقسيم؟"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "هل تريد حفظ تعديلات /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "تحديد آلي"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "أمسح الكل"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "معلومات القرص الصلب"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "كل التجزئات الرئيسية مستخدمة"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "لا يمكنني اضافة أي تجزئة أخرى"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "لكي تمتلك تجزئات أكثر, يرجى الغاء تجزئة كي تتمكن من عمل تجزئة ممتدة"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "حفظ جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "استعادة جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "إنقاذ جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "إعادة تحميل جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "التجهيز الآلي للوسائط القابلة للإزالة"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "اختر ملف"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"جدول التقسيم المحفوظ ليس بنفس الحجم\n"
-"لا زلت تريد الإكمال؟"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "تحذير"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"أدخل قرصا مرنا في السواقة\n"
-"كل البيانات على القرص ستمحى"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "جاري محاولة انقاذ جدول التقسيم"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "معلومات مفصّلة"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "نقطة التجهيز"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "خيارات"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "تغيير الحجم"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "نقل"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "تنسيق"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "جهز"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "اضافة الى RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "اضافة الى LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "ازل التجهيز"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "ازالة من RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "ازالة من LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "تعديل RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "استخدام لـloopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "اعمل تجزئة جديدة"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "قطاع البداية: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "الحجم باليغابايت: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "نوع نظام المفات: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "نقطة التجهيز: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "التفضيل: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "هل تريد ازالة ملف loopback؟"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "غير نوع التجزئة"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "أي نظام ملفات تريد؟"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "جاري التغيير من ext2 الى ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "أين تريد تجهيز ملف loopback %s؟"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "أين تريد بجهيز الجهاز%s؟"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"لم يمكن ازالة تعيين نقطة التجهيز نظرا لأن هذه التجزئة مستخدمة لـloop back.\n"
-"قم بإزالة الـloopback أولا"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "جاري حساب روابط نظام ملفات FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "جاري تغيير الحجم"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "هذا التقسيم غير قابل لتغيير الحجم"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "كل البيانات على هذه التجزئة يجب حفظها احتياطيا"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "بعد تغيير حجم التجزئة %s, فإن كل البيانات على هذه التجزئة ستفقد"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "اختر الحجم الجديد"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "الحجم الجديد بالميغابايت: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "أي قرص تريد نقله؟"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "القطاع"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "أي قطاع تريد نقله؟"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "نقل"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "جاري نقل التجزئة..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "اختر RAID موجود للاضافة"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "جديد"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "اختر LVM l,جود للاضافة"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "اسم LVM؟"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "هذه التجزئة لا يمكن استخدامها لـloopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "اسم ملف Loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "اعط اسم ملف"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "هذا الملف مستخدم من loopback أخرى, اختر ملفا آخر"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "الملف موجود مسبقا, هل تريد استخدامه؟"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "خيارات التجهيز"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "متنوعة"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "الجهاز"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "المستوى"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "حجم chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "كن حذرا: هذه العملية خطيرة"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "أي نوع من التجزئة؟"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "جدول اتتقسيم للقرص %s سيتم كتابته الى القرص!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "ستحتاج الى اعادة التشغيل قبل أن يتم تفعيل التعديلات"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "بعد تهيئة التقسيم %s, فإن كل البيانات الموجودة على التجزئة ستفقد"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "جاري التهيئة"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "جاري تهيئة ملف loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "جاري تهيئة التجزئة %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "خبء الملفات"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "انقل الملفات الى تجزئة جديدة"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"الدليل %s يحتوي مسبقا على بعض البيانات\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "جاري نقل الملفات الى التجزئة الجديدة"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "جاري نسخ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "جاري ازالة %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "التجزئة %s معروفة الآن بالإسم %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "الجهاز: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "حرف سواقة DOS: %s (مجرد تخمين)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "النوع: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "الاسم: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "البداية: قطاع %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "الحجم: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s قطاع"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "الاسطوانة %d الى %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "مجهز\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "غير مجهز\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "محمل\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "المستوى %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "حجم Chunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "أقراص RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "اسم ملف Loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "الحجم: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "الهندسة: %s اسطوانة, %s رأس, %s قطاع\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "معلومات: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "أقراص LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "نوع جدول التقسيم: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "على bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "الخيارات: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "مفتاح تشفير نظام الملفات"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "اختر مفتاح تشفير نظام الملفات"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "مفتاح التشفير هذا بسيط جدا (يجب أن يكون %d حرفا على الأقل)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "مفاتيح التشفير غير متطابقة"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "مفاتح التشفير"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "مفاتح التشفير (مرة أخرى)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "غيّر النوع"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "فضلا اضعط على وسيط"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "ابحث في أجهزة الخادم"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s تجهيز %s قد فشل"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "لا أعرف كيف أجهز %s في النوع %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "بسيط"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "خادم"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "لا توجد مساحة كافية للتحديد الآلي"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr ""
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NIS لا تسطيع ا ستعمال هذ ا البرنامج مع"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr "استمرّ بأيّة حال"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "استعمل مكانا حرا"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr ""
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "قبول"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "هل تريد فعلا مغادرة التثبيت؟"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "لوحة المفاتيح"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "رجاء, اختر لوحة المفاتيح."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "ترقية"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "رجاء اختر لغة نوع الفأرة."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "خادم NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "بطاقة الصّوت ISA هل عندك عند"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "الفأرة"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "ءابؚ؊"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "التحقق"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "خادم LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "تخطي"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr ""
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "إختر ملف"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "متقدم"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "هل تريد الضغط على هذا الزر؟ "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "الألمانية"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr ""
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "الإسبانية"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "الفنلندية"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "الفرنسية"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "النرويجية"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "البولندية"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "الروسية"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "السويدية"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "البلجيكية"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "البلغارية (صوتية)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "البلغارية (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "البيلاروسية"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "الدنماركية"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (سويدية)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "الإستونية"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "يوناني"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "المجرية (الهنغارية)"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "الكرواتية"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "العبرية"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "الآيسلاندية"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "الإيطالية"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr ""
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "اللاتفية"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "المقدونية"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "البرتغالية"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "السلوفينية"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "التاميل"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "الأوكرانية"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr ""
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr ""
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr ""
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr ""
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr ""
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr ""
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr ""
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr ""
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr ""
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr ""
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ولا واحد"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr ""
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "إنتهاء"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "التالي ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "معالج إعداد الشبكة"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "إعداد جديد (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "إعداد قديم (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "إنهاء"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "تابؚ"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr ""
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr ""
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr ""
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr ""
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "اتصل"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "اقطع الإتصال"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "قم بإعداد الإتصال"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "وصلة ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "وصلة LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "وصلة انترنت"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr ""
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr ""
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr ""
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr ""
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr ""
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr ""
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr ""
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr ""
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr ""
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr ""
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr ""
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr ""
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "إختر بلدك"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "سرعة الإتصال"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "الوقت الأقصى للاتصال (بالثواني)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "فشل التحميل: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr ""
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr ""
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr ""
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr ""
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr ""
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "طابعة محلية"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "طابعة بعيدة"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr ""
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr ""
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "ءابؚ؊ شبك؊ (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr ""
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr ""
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "الطابعات المحلية"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "الطابعات البعيدة"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ""
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr ""
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "على خادم CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr " CUPS اؚدادات"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "الخادم CUPS حدّد"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "عنوان IP لخادم CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "البوابة"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "تهيئة CUPS آلية"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "أضف طابعة جديدة"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "طابعة محلية"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "تحقق من الطابعات آليا"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "تحقق آلي"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "تم التحقق من %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"لم يتم ايحاد طابعة محلية!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "رجاء اختر المنفذ الموصلة إليه طابعتك."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "إعداد يدوي"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "مجموعة العمل"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "اسم مستضيف الطابعة"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "الوصف"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "المكان"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "تم اختيار النّموذج يدويًّا"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "إختيار وحدات الطابعة"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "ما هو نوع الطابعة لديك؟"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "ؼؚداد OKI WinPrinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "ؼؚداد Lexmark Inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"هل تريد تعيين هذه الطابعة (\"%s\")\n"
-"كطابعة افتراضية؟"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "ؼءبؚ"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "طابعة خام"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "إغلاق"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "جاري الطباعة/المسح على \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "جاري الطباعة على الطابعة \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "قائمة خيارات الطابعة"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "نقل إعدادات الطابعة"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "جاري بدء الشبكة..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "لم يتم تحديد وظيفية الشبكة"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "مرتفع"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "أي نظام طباعة تريد أن تستخدم؟"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "إعداد الطابعة \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "جاري إعداد التطبيقات..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "تغيير نظام الطباعة"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "هل تريد تجربة إعداد طابعة أخرى؟"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "تعديل اعدادات الطابعة"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"الطابعة %s\n"
-"هل تريد تعديل تلك الطابعة؟"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "نوع وصلة الطابعة"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "اعرف كيف تستخدم هذه الطابعة"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr ""
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "إعداد البروكسي"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "عنوان"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr ""
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr ""
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr ""
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr ""
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr ""
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr ""
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr ""
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "إنترنت"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "نظام"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr ""
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "خادم قواعد بيانات"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "الخدمات"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr ""
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr ""
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr ""
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "ابدأ"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "توقف"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "الإنترنت و المراسلة"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "وسائط متعددة و رسوميات"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "مركز تحكم Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "واجهات الإستخدام"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "الالعاب"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "استشاعات Mandrake"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr ""
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "أداة اعداد المثبّت الآلي"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "إعداد الخطوات الآلية"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "تثبيت آلي"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "أزل المادة الأخيرة"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "رجاء اختر كل المستخدمين الذين تريد تضمينهم في النسخ الإحتياطي."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "ازل المادة المختارة"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "المستخدمون"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "فضلا أدخل اسم المستضيف أو عنوان IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "رجاء أدخل اسم الدخول"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "رجاء كلمة المرور"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "تذكّر كلمة السّرّ هذه "
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "وصلة FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "وصلة آمنة"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "إلى المساعد CD/DVDROM الاستعمال "
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "رجاء اختر مساحة القرص المدمج"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "فضلا قم بالتأشير هنا اذا كنت تستخدم وسيط CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "فيما مضى CDRW من فضلك فحص ,إذا أردت أن تمحو "
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-" من فضلك فحص إذا أردت أن تتضمّن \n"
-"ركّب الجدر على قرصك المدمج"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "الشبكة"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "كلّ ساعة "
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "يوميًّا "
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "أسبوعيّا"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "شهريا"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "استخدم المراقب"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"فضلا اختر الفترة \n"
-"ما بين كل عملية نسخ احتياطي"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"ع؏اإ ا؎تع\n"
-"وسيط النسخ الاحتياطي"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTPاستخدم مع المراقب"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "ماذا "
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "أين"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "متى "
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "خيارات أكثر"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "ؼؚدادات Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "رجاء اختر أين تريد النسخ الاحتياطي."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "على القرص الصّلب"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "عبر الشّبكة"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "رجاء اختر ما تريد نسخه احتياطياً"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "نظام المساعد"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "مستخدمو المساعد"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "اخترالمستخدم يدويًّا"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"مصادر المساعد :\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"-ملفّات النّظام :\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"-ملفّات المستخدم:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"-الملفّات الأخرى:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- احفد القرص الصّلب على الطّريق :%s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"-FTP و على host احفد على : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- خيارات:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackups use tar and bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackups use tar and gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"-Daemon (%s) include :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Network by FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Network by SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "رجاء اختر تاريخ الإستعادة"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "اختر وسيط آخر للاستعادة منه"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "وسيط آخر"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "استعد النّظام"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "أعد المستخدمين "
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "استؚد آ؎ع"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "استعادة مخصصة"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "السابق"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "حفظ"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "استؚاد؊"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "التالي"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "قائمة الحزم المطلوب تثبيتها"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "رجاء اختر تاريخ الإستعادة..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "رجاء اختر وسيط النسخ الإحتياطي..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "رجاء اختر البيانات المطلوب نسخها احتياطيا..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "رجاء أدخل سرعة سواقة كتابة الأقراص"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "قم بالنسخ الآن من ملف التهيئة"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "اعرض تهيئة النسخ الإحتياطي"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "إعدادات المعالج"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "إعداد متقدم"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "فشل تثبيت %s. ظهر الخطأ التالي:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "انتهى"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs restart"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "استيراد الخطوط"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "خيارات متقدمة"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "قائمة الخطوط"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "طابعات عادية (Generic)"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "تم اختيار الكل"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "ازل القائمة"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "الإختبارات الأولية"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "ما بعد التثبيت"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "ما بعد ازالة التثبيت"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "أعق"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "مشاركة اتصال الإنترنت غير ممكَّنة الآن."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr "ماذا تحبّ أن تعمل"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "مشاركة إتصال الإنترنت ممكَّنة الآن."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "السّطح البينيّ %s(استعمال مركبة%s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "السّطح البينيّ %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "لا محوّل الشّبكة على نظامك"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "سطح بينيّ للشبكة "
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "واجهة الشبكة معدّة مسبقا!"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "اعداة تهيئة آلية"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "أظهر تهيئة الواجهة الحالية"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"الشّكل الحاليّ من `%s':\n"
-"n/الشّبكة : %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "عنوان IP لخادم DHCP (هذا)"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Firewalling configuration تم اكتشاف "
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "لم يتم اعداد أي مشاركة اتصال بالإنترنت"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "إعدادات مشاركة إتصال الإنترنت"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "النّبذة :"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "نبذة جد يد ة..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname :"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "النوع:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "الانتظار من فضلك"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "ؼؚداد LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "المحرك"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "الواجهة"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "الحالة"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "المعالج..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "تطبيق"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "يرجى الإنتظار... جاري تطبيق الإعدادات"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "متّصل "
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "غير متصل"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "متصل"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "ؼؚداد LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "المحوّل %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP العميل "
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "إعدادات الإتصال بالإنترنت"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "إعدادات الإتصال بالإنترنت"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "نوع العلاقة"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameters"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP العميل"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "مركز التّحكّم "
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "كندة (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "الولايات المتّحدة الأمريكيّة (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "الولايات المتّحدة الأمريكيّة (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "الولايات المتّحدة الأمريكيّة (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "الصين (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "اليابان (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "اليابان (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "أوروبّا الشّرقيّة"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "أيرلندا"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "أوروبّا الغربيّة"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "أوستراليا"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "نيوزيلندا "
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "جنوب أفريقيا "
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "الأرجنتين "
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"من فضلك\n"
-" في معيار تليفزيونك و البلد type"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV norm :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "الاستعمال: keyboarddrake [--expert][لوحة المفاتيح]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "من فضلك اختر تصميم لوحة مفاتيحك"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cd-Romتغيير"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "إعرض سجلات اليوم المختار فقط"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/ملف/_جديد"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>ŘŹ"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/ملف/_فتح"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>ف"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/ملف/_حفظ"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>Ř­"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/ملف/حفظ با_سم"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/ملف/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/خ_يارات"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/خيارات/احتبار"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_مساعدة"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/مساعدة/_حول"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "المستخدم"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "الرسائل"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "شعوح أدوات Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "بح؍"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "أداة لمراقبة سجلات نظامك"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "الضبط"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "الموائمة"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "لكن ليس موائمة"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "احتيار ملف"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "التقويم"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "محتويات الملف"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "تنبية البريد/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "يرجى الإنتظار, جاري تحليل الملف: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "تهيئة تنبيه البريد/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"أهلا بكم الى أداة تهيئة البريد/SMS.\n"
-"\n"
-"هنا سيمكنك الإعداد \n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "إعدادات الخدمات"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "حمل الإعدادات"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "سوف تستلم تنبيها اذا كان التحميل أعلى من هذه القيمة"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "إعدادات التنبيه"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "أعدّ الطريقة التي سينبهك النظام بها"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "حفظ بإسم.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "no serial_usb found\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s found on %s وفّق بينه "
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "اختر جهاز المسح الضوئي"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "هذا %s الماسح الضّوئيّ غير مدعّم"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "جهاز الإقلاع"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "إعدادات الجدار الناري"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "أعدادات الجدار الناري"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "اختر لغتك"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "اختر نوع التثبيت"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "التحقق من الأقراص الصلبة"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "إعداد الفأرة"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "اختر لوحة المفاتيح الخاصة بك"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "الأمن"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "إعداد نظم الملفات"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "تجهيز التجزئات"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "اختر الحزم التي ستُثبَّت"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "تثبيت النظام"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "أضف مستخدم"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "تهيئة الشبكة"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "تهيئة الخدمات"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "تثبيت محمِّل الإقلاع"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "إعمل قرص إقلاع"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "تهيئة X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "تثبيت تحديثات النظام"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "الخروج من التثبيت"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"?قد نكتب التّغييرات هذه للقرص. اعد اد كامل \n"
-" \n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "استءؚ"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "%sللكتابة %sلا يمكن أن ينفتح \n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "لا, لا أحتاج الى DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "نعم أحتاج الى DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "لا, لا أحتاج الى NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "نعم أحتاج NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "لا تحفظ"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "ؼحفظ و ا؎ع؏"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "معالج إعداد الجدار الناري"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "لا (امنع هذا من الإنترنت عن طريق الجدار الناري)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "نعم (اسمح لهذا من خلال الجدار الناري)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "يرجى الإنتظار... جاري التأكد من الحزم المثبتة"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "ويب/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "جهاز شبكة (عميل)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "خادم NFS, خادم SMB, خادم بروكسي, خادم ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "أدوات المكتب"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "محطة عمل غنوم"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "أدوات لجهاز بالم بايلوت أو فايزور ألخاص بك"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "محطة عمل"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "جدتر ناري/موجِّه"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "خادم أسماء النطاثات و معلومات الشيكة"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"برامج مكتبية: معالجة الكلمات (kword, abiword), الجداول الحسابية (kspread, "
-"gnumeric) , برامج عرض pdf, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "أدوات صوتية: مشغلات mp3 أو midi, مازجات صوت, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "كتب و مذكرات 'كيف أعمل' حول لينكس و البرامج الحرة"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "محطو عمل كيدي"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "وسائط متعدددة - فيديو"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "مجموعة من الأدوات للبريد , الأخبار, الإنترنت, نقل الملفات, و المحادثة"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "قواعد البيانات"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "خادم قواعد البيانات PostgreSQL أو MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "أدوات لتسهيل إعداد جهازك"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "وسائط متعددة - صوت"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "أدوات خدمية"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "وثائق المساعدة"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "أدوات سطر الأوامر"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "خادم البريد Postfix, خادم الأخبار Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "محطة انترنت"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "محطة وسائط متعددة"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "أدوات الإعدادات"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "أسطح مكتب رسومية أكثر (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"بيئة سطح مكتب كيدي, البيئة الرسومية الأساسية مع مجموعة من الأدوات المصاحبة"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "بيئات رسومية"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "أدوات لعمل و نسخ الأقراص"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "محطة عمل مكتبية"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "خادم"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, الخ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "برامج رسوميات مثل The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "برامج و مكتبات تطوير C و C++"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "خادم شبكات"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "بريد/أدوات مجموعات/أخبار"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "محطة ألعاب"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "برامج تشغيل و تحرير الفيديو"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "وسائط متعددة - رسوميات"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "برامج التسلية: ألعاب فيديو, ألعاب لوحات, ألعاب ستراتيجية, الخ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"مجموعة من الأدوات لقراءة و ارسال البريد و الأخبار (pine, mutt, tin..) و "
-"لتصفح الإنترنت"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "الأرشفة, محاكيات, أدوات مراقبة النظام"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "الميزانية الشخصية"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"بيئة رسومية مع مجموعة من التطبيقات و أدوات سطح المكتب المناسبة للمستخدمين "
-"العاديين"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "عملاء لبروتوكولات مختلفة مثل ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "بوابة انترنت"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "برامج تحرير/تشغيل الفيدية و الصوت"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "أسطخ مكتب رسومية أخرى"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "محررات نصوص, أغلفة, أدوات ملفات, طرفيات"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "برامج لإدارة ميزانيتك مثل gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "ادارة المعلومات الشخصية"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "وسائط متعددة - نسخ أقراص"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "محطة عمل علمية"
-
-#~ msgid "About"
-#~ msgstr "حول"
-
-#~ msgid " Help "
-#~ msgstr " مساعدة "
-
-#~ msgid "None"
-#~ msgstr "ولا واحدة"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "اختر الطابعة الافتراضية:"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "يمكنك الآن اعطاء الخيارات للوحدة %s"
-
-#~ msgid "mount failed"
-#~ msgstr "فشل التحميل"
-
-#~ msgid "Low"
-#~ msgstr "منخفض"
-
-#~ msgid "Medium"
-#~ msgstr "متوسط"
-
-#~ msgid "Export"
-#~ msgstr "تصدير"
-
-#~ msgid "click here"
-#~ msgstr "انقر هنا"
-
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "تم التخقق من وجود %s, هل تريد اعداده؟"
-
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "رجاء اختر الطابعة التي تريد تهيئتها."
-
-#~ msgid "authentification"
-#~ msgstr "المصادقة"
-
-#~ msgid "user"
-#~ msgstr "المستخدم"
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "جاري مسح مصادر nfs المشتركة المتوفرة"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "جاري مسح مصادر nfs المشتركة المتوفرة للخادم %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "جاري مسح مصادر samba المشتركة المتوفرة"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "جاري مسح مصادر samba المشتركة المتوفرة للخادم %s"
-
-#~ msgid "\\@quit"
-#~ msgstr "\\@؎عو؏"
-
-#~ msgid "Removable media"
-#~ msgstr "وسائط قابلة للإزالة"
-
-#~ msgid "Active"
-#~ msgstr "نشط"
-
-#~ msgid "No X"
-#~ msgstr "لا X"
-
-#~ msgid " Linux "
-#~ msgstr " لينكس "
-
-#~ msgid " System "
-#~ msgstr " نظام "
-
-#~ msgid " Other "
-#~ msgstr " أخرى "
-
-#~ msgid "please choose your CD space"
-#~ msgstr "رجاء اختر مساحة القرص المدمج"
-
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "فضلا قم بالتأشير هنا اذا كنت تستخدم وسيط CDRW"
-
-#~ msgid " Tape "
-#~ msgstr " الشريط "
-
-#~ msgid " Cancel "
-#~ msgstr " إلغاء "
-
-#~ msgid " Ok "
-#~ msgstr " موافق "
-
-#~ msgid "close"
-#~ msgstr "إغلاق"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "لم يمكن فتح /etc/sysconfig/autologin للقراءة: %s"
-
-#~ msgid "New"
-#~ msgstr "جديد"
-
-#~ msgid "Remote"
-#~ msgstr "بعيد"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "فضلا اضغط الزر بالأعلى\n"
-#~ "\n"
-#~ "أو استخدم \"جديد\""
-
-#~ msgid "Use \"New\""
-#~ msgstr "استخدم \"جديد\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "اذا لم تتضمن القائمة المدخل المطلوب, قم بإدخاله هنا:"
-
-#~ msgid "Shared resource"
-#~ msgstr "مصدر مشترك"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
deleted file mode 100644
index fb71a4b28..000000000
--- a/perl-install/share/po/az.po
+++ /dev/null
@@ -1,12924 +0,0 @@
-# Azerbaijani Turkish translation of DrakX
-# Copyright (C) 1999 MandrakeSof
-# Vasif Ismailoglu MD <azerb_linux@hotmail.com>, 2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-06-09 23:30GMT +0200\n"
-"Last-Translator: Vasif İsmayıloğlu MD <azerb_linux@hotmail.com>\n"
-"Language-Team: Azerbaijani Turkish <linuxaz@azerimal.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Bütün başlıqları ayrı ayrı quraşdır"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama ifadələrini işlət"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Təkcə \"%s\" kartını qur (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Çoxlu Başlıq quraşdırılması"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sizin sisteminiz çoxlu başlıq quraşdırmasını dəstəkləyir.\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Ekran kartÄą"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Ekran kartĹnĹzĹ seçin"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Bir X vericisi seçin"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X verici"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Bir X vericisi seçin"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X verici"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Necə bir XFree qurğusunu istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə düzgün işləyər.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir fikir olar."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "3D avadanlıq sür'ətləndirməsi ilə XFree %s"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Sizin kartınızın XFree %s ilə 3D dəstəyi ola bilər.\n"
-"DİQQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERİNİZ DONDURA BILƏR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "SINAQ MƏRHƏLƏSİNDƏKİ 3D sür'ətləndirmə dəstəkli XFree %s"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartınızın 3D sür'ətləndirmə dəstəyi ola bilər, amma sadecə olaraq "
-"XFree %s\n"
-"ilə düzgün işləyər.\n"
-"DİQQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERİNİZ DONDURA BILƏR.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir seçki olar."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree quraşdırılması"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Ekran kartınızın yaddaş böyüklüyünü seçin"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "X verici üçün seçənəkləri göstərin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Monitorunuzu seçin"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Buradaki iki vacib parametr üfüqi ve şaquli yeniləmə sür'ətləridir.\n"
-"Seçərkən monitorunuzun qabiliyyətinin üstündə bir parametr\n"
-"seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n"
-"Seçərkən bir qərarsızlığa düşərsəniz, alçaq rezolyusiya seçin."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Üfüqi yeniləmə sür'əti"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Şaquli yeniləmə sür'əti"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor qurulmayÄąb"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ekran kartı hələ qurulmayıb"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezolyusiya hələ seçilməyib"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Diqqət: Bu qrafika kartı ilə ediləcək sınaq təhlükəlidir"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Qurğuların sınağı"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bə'zi parametrləri dəyişdirin"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Bir xəta oldu:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Bu qurğular doğrudur?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Bir xəta oldu, parametrləri dəyişdirin"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolyusiya"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Rezolyusiya və rəng dərinliyini seçin"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Ekran kartÄą: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 verici: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Daha Çox"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Oldu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Usta Modu"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Hamısını Göstər"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolyusiyalar"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavatura düzülüşü: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Siçan nÜvß: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Siçan avadanlığı: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorun Şaquli Daraması: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorun Üfüqi Yeniləməsi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Ekran kartÄą: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Ekran kartÄą: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Ekran kartı yaddaşı: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Rəng dərinliyi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolyusiya: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 verici: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 sĂźrĂźcĂź: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window qurğuları hazırlanır"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Nə etmək istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Monitoru Dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ekran kartını dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Verici seçənəklərini dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Rezolyusiyanı Dəyişdir"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mə'lumatı göstər"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Yenidən sına"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Çıx"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Mövcud qurğuları saxlayım?\n"
-"Hal-hazırkı qurğular:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ilə Açılış"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq X ilə açılması üçün qura bilərəm.\n"
-"Açılışda X Window ilə başlamaq istəyirsiniz?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "\"%s\"a(ə) təkrar girin və dəyişiklikləri fəallaşdırın"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lütfen çıxın və Ctrl-Alt-BackSpace düymələrinə basın"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 rəng (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 min rəng (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 min rəng (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milyon rəng (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyard rəng (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB və ya daha çox"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standart VGA, 60 Hz-də 640x480 "
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 56 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Uyğun, 87 Hz-də titrəşimli 1024x768 (800x600 yox)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 87 Hz-də titrəşimli 1024x768, 56 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Təkmilləşdirilmiş Super VGA, 60 Hz-də 800x600, 72 Hz-də 640x480"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Titrəşimsiz SVGA, 60 Hz-də 1024x768, 72 Hz-də 800x600"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Yüksək Frekanslı SVGA, 70 Hz-də 1024x768"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Çoxlu Frekansa qadir 60 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Çoxlu Frekansa qadir 74 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Çoxlu Frekansa qadir 76 Hz-də 1280x1024"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "70 Hz də 1600x1200 qadir Monitor"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "76 Hz də 1600x1200 qadir Monitor"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Açılış qisminin ilk sektoru"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektoru (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Qurulumu"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grup Qurulumu"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "Mətn menyulu LILO"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "Qrafiki menyulu LILO"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Wİndowsdan açĹl (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Sistem yükləyicisi ana seçənəkləri"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "İstifadə ediləcək Açılış idarəcisi"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Açılış yükləyici quruluşu"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Açılış avadanlığı"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (köhnə BIOSlarda işləməz)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Bəsit"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "bəsit"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Ekran modu"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Açılışda gecikmə müddəti"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Parol"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Parol (təkrar)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Əmr sətiri seçənəklərini məhdudlaşdır"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "məhdudlaşdır"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "/tmp-i hər açılışda təmizlə"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ümumi yaddaş miqdarı (%d MB tapıldı)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Birdən artıq profilə icazə ver"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Yaddaş miqdarını Mb cinsindən verin"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``Əmr sətiri seçənəklərini məhdudlaşdır`` seçənəyi parolsuz bir işə yaramaz"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Ä°nit Ä°smarÄącÄą"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Firmware Gecikməsini Aç"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Çəkirdək Açılışı Vaxt Dolması"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CDdən Açılışı Fəallaşdırım?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF Açılışı Fəallaşdırım?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Əsas OS"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Buradakı bir birindən fərqli seçənəklərə yenilərini əlavə edə bilər,\n"
-"ya da mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Əlavə et"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "QurtardÄą"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Təkmilləşdir"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ne cür bir giriş istəyirsiniz?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linuks"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Digər sistemlər (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Digər sistemlər (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Digər sistemlər (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Əks"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "KĂśk"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Sonuna əlavə et"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Oxu-yaz"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Cədvəl"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "E'tibarsÄąz"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Əsas"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd bĂśyĂźklĂźyĂź"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVÄ°deo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Girişi sil"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Boş etiket qəbul edilə bilməz"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Bu etiket istifadə edilməz"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ara ĂźzĂź tapÄąldÄą"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Başqa var?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Heç %s ara ßzß var?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Xeyr"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Bəli"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Avadanlıq mə'lumatına bax"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s kartı (%s) üçün sürücü yüklənir"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "HansÄą %s sĂźrĂźcĂźsĂź sÄąnansÄąn?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bəzi hallarda, %s sürücü düzgün işləməsi üçün əlavə mə'lumat istəyə bilər.\n"
-"Sürücüler üçün əlavə bir xüsusiyyət göstərmək mi istəyərsiniz, yoxsa\n"
-"sürücülərin lazımi mə'lumatlar üçün avadalığı tanımasını mı istəyərsiniz? \n"
-"Bə'zən tanımlama kompüterinizi dondura bilər amma donduğu üçün\n"
-"kompüterinizə heç bir şey olmaz."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Avtomatik yoxla"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Seçənəkləri göstər"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"İstəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n"
-"Parametrlər``ad=qiymət ad2=qiymət2...'' şəklində olmalıdır.\n"
-"Məsələn ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modul seçənəkləri:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s modulunun yüklənməsi iflas etdi.\n"
-"Yenidən başqa bir parametr ilə sınamaq istəyirsiniz?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s artıq əlavə edilmişdir)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Zəif parol seçdiniz!"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Xahiş edirik bir istifadəçi adı alın"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"İstifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri "
-"ola bilər"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Bu istifadəçi adı artıq vardır"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "İstifadəçini əlavə et"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir istifadəçi girin\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "İstifadəçini qəbul et"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Həqiqi adı"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "İstifadəçi adı"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "QabÄąq"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Timsal"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Avtomatik Giriş"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq bir istifadəçi ilə başlada bilərəm.\n"
-"İstəmirsiniz isə rədd edin."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Əsas istifadəçini seçin:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "İstifadə etmək istədiyiniz pəncərə idarəçisini seçin:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "HamÄąsÄą"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "XĂźsusi"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS başlayır"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Ləğv et"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Krakerlərə xoşgəlmişsiniz"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Zəif"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standart"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Yüksək"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Yüksək"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Şübhəci"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu səviyyə RAID'i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha "
-"asand\n"
-"işlədiləcək, ancaq xətalara qarşı da həssaiyyəti də artacaqdır. İnternetə \n"
-"bağlı isəniz bunu tövsiyə etmirik. Parol ilə girilir."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Parollar fəallaşdırıldı, yenə də bir şəbəkə üstündə istifadə edilməməsi "
-"tövsiyə edilir."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"İnternetə bağlı bir kompüter üçün standart və tövsiyə edilən bir "
-"təhlükəsizlik səviyyəsidir."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Bu təhlükəsizlik səviyyəsiylə sistemin bir verici olaraq istifadəsi "
-"mĂźmkĂźndĂźr. \n"
-"Təhlükəsizlik, birdən çox alıcının bağlanmasına icazə verəcək şəkildə "
-"artırılmışdır. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Biz dördüncü səviyyə haqlarını verdik və sistem xarici bağlantılara qarşı "
-"tamamilə qapalıdır.\n"
-"Təhlükəsizlik səviyyəsi indi ən üstdədir."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Təhlükəsizlik səviyyəsini seçin"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "X verici üçün seçənəkləri göstərin"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s emeliyyat sistemi secki proqramina xos gəlmissiniz!\n"
-"\n"
-"Içlerinden birini acmaq ucun adini yazin ve <ENTER>\n"
-"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Emeliyyat sistemi secici GRUB'a xos gəlmissiniz!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c ve %c duymeleri ile isÄąqlandÄąrÄąlmÄąs girisleri sece bilersiniz"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"acilisdan evvel emrleri duzeltmək ucun 'e', emr setiri ucun ise 'c' basin"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot içində lazımi yer yoxdur"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Masa Üstü"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Başlama Menyusu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Sistem yükləyicisini haraya qurmaq istəyirsiniz?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "hələlik yardım sistemi mövcud deyildir.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fayl"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fayl/Çı_x"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>x"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle KateqoriyasÄąndan Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Ənənəvi Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Ənənəvi Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Açılışda Auroranı başlat"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modu"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modu"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Açılış İdarəçisi olaraq hazırda %s işlədirsiniz.\n"
-"Quraşdırma sehirbazını başlatmaq üçün tıqlayın."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Qur"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistem modu"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Açılışda X-Window sistemini başlat"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Xeyr, Avtomatik giriş istəmirəm"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Bəli, bu istifadəçi üçün avtomatik giriş istəyirəm (istifadəçi, masa üstü)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Oldu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "/etc/inittab oxunmaq ßçßn açĹla bilmir: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm_.c:114
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "FransÄązca"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belçika dili"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Almanca"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Yunanca"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norveçcə"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "İsveçcə"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Ä°talyanca"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "serial"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Əvvəlcə datanızın yedəyini alın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Diqqətlə Oxuyun!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot istifadə etməyi istəyirsinizsə, boş disk sahəsi (2048 sektor bəsdir.)\n"
-"buraxmayÄą unutmayÄąn."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Xəta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Sehirbaz"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Monitorunuzu seçin"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tək bir böyük disk bölməniz var\n"
-"(əsasən MS DOS/Windows istifadə edər).\n"
-"Əvvəlcə bu disk bölməsinin böyüklüyünü dəyişdirməyinizi\n"
-"tövsiyə edirik. Əvvəlcə bölmənin üstünə, sonra \"Böyüklüyü\n"
-"Dəyişdir\" düyməsinə tıqlayın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Ətraflı"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "bağlama iflas etdi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Boş"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Digər"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Fayl sistemi nĂśvĂź:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Yarat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "NĂśv"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Yerinə ``%s'' işlət"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Sil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Əvvəlcə ``Ayır'-ı işlət"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsinin növünü dəyişdirdikdən sonra, bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Monitorunuzu seçin"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Yeni bölmə yarat"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Usta moduna keç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Normal moda keç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Geri al"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Davam edilsin?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Qeyd etmədən Çıx"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Bölmə cədvəlini qeyd etmədən çıxırsınız?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Avtomatik ayÄąr"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Hamısını təmizlə"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Sabit disk seçkisi"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Bütün birinci bölmələr istifadədədir"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Artıq bölmə yaratmaq üçün, bir bölməni silib məntiqi bölmə yaradın"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Bölmə cədvəlini yaz"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Fayl seç"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Yedək bölmə cədvəli eyni böyüklüyə sahib deyil\n"
-"Davam etmək istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Xəbərdarlıq"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Disket sürücüyə bir disket yerləşdirin\n"
-"Bu disketdəki bütün mə'lumatlar yox olacaqdır"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Bölmə cədvəli qurtarılmağa cəhd edilir"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Mə'lumatı göstər"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Bağlama nöqtəsi"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Seçənəklər"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Böyüklüyünü Dəyişdir"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Daşı"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Şəkilləndir"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Bağla"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "RAIDə əlavə et"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "LVMə əlavə et"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "AyÄąr"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "RAIDdən ayır"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "LVMdən ayır"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAIDi dəyişdir"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback üçün istifadə et"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Yeni bölmə yarat"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Başlanğıç sektoru: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "MB cinsindən böyüklük: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Fayl sistemi nĂśvĂź: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Bağlama nöqtəsi: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Xüsusiyyətlər: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Bölmə növünü Dəyişdir"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Hansı dili istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "%s loopback avadanlığını haraya bağlamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Bu disk bölməsi loopback üçün istifadə edildiyindən ötrü bağlanma "
-"nöqtəsindən ayrıla bilinmir.\n"
-"Əvvəlcə loopback-ı ləğv edin."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Fat fayl sistemi uclarÄą hesaplanÄąr"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Böyüklüyü dəyişdirilir"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Hansı bölmə növünü istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Bu bölmədəki bütün mə'lumatlar yedəklənməlidir"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi böyüklüyü dəyişdirildirkdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Yeni bÜyßklßk seçin"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "MB cinsindən böyüklük: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Hansı diskə daşımaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Hansı sektora daşımaq istəyirsiniz?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Daşınır"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Bölmə daşınır..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Əlavə etmək üçün mövcud bir RAID seçin"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "yeni"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Əlavə etmək üçün mövcud bir LVM seçin"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM adÄą?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Bu disk bölməsi loopback üçün işlədilməz"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback fayl adÄą: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Həqiqi adı"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Fayl başqa bir loopback tərəfindən istifadədədir, başqa\n"
-"birini seçin"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fayl onsuz da vardır. İşlədilsin?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Modul seçənəkləri:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "avadanlÄąq"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "səviyyə"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "parça bÜyßklßyß"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Diqqətlı olun: bu əməliyyat təhlükəlidir."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Nəcə bölməlandirmə istəyirsən?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Bağışlayın, /boot bölməsini bu sürücüdə yarada bilməyəcəm.\n"
-"Onda ya LILO istifadə edə bilməyəcəksiniz ve /boot bölümünə \n"
-"ehtiyacınız yoxdur və ya LILO istifadəsini sınayarsınız, ancaq LILO işləməyə "
-"bilər."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Seçdiyiniz bölüm fiziki sahənin üstündə (1024. silindrin xaricində)\n"
-"/boot bölümünüz yoxdur. Lilo açılış idarəcisindən istifadə etmək "
-"istəyirsinizsə, \n"
-"/boot bölməsini əlavə edərkən çox diqqətli olmalısınız."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Bir proqram tə'minatlı RAID bölməsini kök qovluğu (/) olaraq tə'yin "
-"etdiniz.\n"
-"Əgər lilo ya da grub istifadə etmək istəyirsinizsə, bir /boot bölməsi\n"
-"əlavə etməyi unutmayın"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s sürücüsünün bölmə cədvəli diskə yazılacaq!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni qurğuların fəallaşmağı üçün sistemi yenidən başlatmalısınız"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi şəkilləndirildikdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinəcəkdir"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Şəkilləndirilir"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Şəkilləndirilən bölmə: %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid iflas etdi"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolyusiya: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "AvadanlÄąq: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS sürücü hərfi: %s (sadəcə təxmini)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "NĂśv: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ad: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Başlanğıc: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "BĂśyĂźklĂźyĂź: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d -dən silindr %d-yə\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Şəkilləndirilmiş\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Şəkilləndirilməmiş\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Bağlı\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback faylÄą:\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ana açılma bölməsi\n"
-" (MS-DOS açılışı üçün)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Səviyyə %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Parça bÜyßklßyß %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskləri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faylÄą adÄą: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Bəlkə də bu bir Sürücü bölməsidir.\n"
-"Onda bunu ele beləcə buraxın.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bu, ikili açılış üçün xüsusi\n"
-"Bootstrap-dÄąr.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "BĂśyĂźklĂźk: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometriyası: %s silindr, %s baş, %s sektor\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Mə'lumat: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskləri %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Bölmə cədvəli növü: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "%d data yolunda, %d nĂś'li\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Seçənəklər: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Fayl sistemi nĂśvĂź: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Bölmə növünü Dəyişdir"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS verici"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s şəkilləndirilməsində %s bölmə xətası"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s'i necə şəkilləndirəcəyimi bilmirəm (Növ: %s)"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayrılırkən xəta oldu: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "bəsit"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "verici"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB dən kiçik disk bölmələrində JFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB dən kiçik disk bölmələrində ReiserFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Bağlama nöqtələri / ilə başlamalıdır"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Onsuz da bağlama nöqtəsi %s olan bir bölmə var\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Bu bağlama nöqtəsi üçün həqiqi bir fayl sisteminə (ext2, reisrfs)\n"
-"ehtiyac vardÄąr.\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Avtomatik yerləşdirmə üçün boş sahə yoxdur"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Yazmaq üçün açılan %s'də xəta: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlü bir sürücü "
-"tapılmadı. Bu problemin qaynağı üçün avadanlığınızı yoxlayın"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Heç disk bölməniz yoxdur!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yuxarıda sürücünüzdə tapılan Linuks bölmələri sıralanıb\n"
-"Sehirbazın tövsiyələrinə uyun, onlar çox vaxt işə yarayır.\n"
-"Əgər bunu istəməsəniz en azından kök bölməsi (\"/\") seçməlisiniz\n"
-"Çox kiçik bölmə seçməyin. yoxsa çox proqram tə'minatı yükləyə bilməzsəniz.\n"
-"Əgər verilərinizi başqa bölmədə tutmaq istəyirsinizsə, ondabir de \"/home\" "
-"bölməsi də yaratmalısınız (birdən çox Linuks\n"
-"bölməniz var isə).\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, hər bölmə aşağıdakı kimi sıralanıb: \"Ad\", \"Həcm\".\n"
-"\n"
-"\n"
-"\"Ad\" belə kodlanıb: \"sürücü növü\", \"sürücü mömrəsi\",\n"
-"\"bölmə nömrəsi\" (məsələn \"hda1\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" əgər sürücünüz IDE sürücüdürsə \"hd\"dirvə SCSI sürücü isə "
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n"
-"\"b\"nin mənası \"ikinci sürücü\"dür vs..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"İndi, açılışda avtomatik olaraq başlamasını istədiyiniz xidmətləri \n"
-"seçə bilərsiniz. Siçan bir maddənin üzərina gəldiyində o xidmətin rolunu "
-"açĹqlayan\n"
-"kiçik bir baloncuq ortaya çĹxacaqdĹr.\n"
-"\n"
-"Əgər kompüterinizi bir verici olaraq istifadə edəcəksəniz bu addımda tam bir "
-"diqqət ayırmalısınız:\n"
-"mühtəməldir ki lazımi heç bir xidməti başlatmaq istəməzsiniz."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Bu nöqtədə Linuks Mandrakeni sabit diskinizdə haraya quracağınıza\n"
-"qərar verəcəksiniz. Əgər diskiniz boş isə və ya bir başqa sistem\n"
-"bütün yeri doldurmuş isə, o zaman diskinizdə Linuks Mandrake üçün\n"
-"yer açmalısınız. Ona görə də diski bölmələndirməlisiniz.\n"
-"Bölmələndirmə əsasən diskinizdə məntiqi sürücülər yaratmaqdan ibarətdir.\n"
-"\n"
-"Ümumiyyətlə bölmələndirmənin təsiri geri dönülməzdir.Ona görə də\n"
-"bu iş çox gərgin və yorucudur. Əgər özünüzə inanmırsınız isə bu\n"
-"sehirbaz sizə yardım edər. Başlamadan əvvəl xahiş edirik əl kitabçanıza\n"
-"baxın. Və bu iş üçün bir az vaxt ayırın.\n"
-"\n"
-"\n"
-"Sizə ən az 2 bölmə lazımdır. Biri sistemin özünü köçürməsi üçün\n"
-"Digəri isə uydurma yaddaş (ya da digər adı ilə Swap) üçün.\n"
-"\n"
-"\n"
-"Əgər diskiniz onsuz da bölünmüş isə (əvvəlki sistemden ya da\n"
-"başqa bölmələndirmə vasitələri ilə hazırlanmış) quruluşda\n"
-"sadəcə olaraq o yerləri yükləmək üçün seçin.\n"
-"\n"
-"\n"
-"Əgər disk bölünməmiş ise, yuxarıdakı sehirbazdan istifadə edə bilərsiniz.\n"
-"Sisteminizin quruluşundan asılı olaraq müxtəlif imkanlarınız var:\n"
-"\n"
-"* Bßtßn diski sil: Linuks Mandrake qurmaq ßçßn bßtßn diskinizin\n"
-" üzərindəki bölmələri silər. Burada diqqətli olun.\n"
-" Sildikləriniz əsla geri gəlməz.\n"
-"\n"
-"\n"
-"* Windows bölməsindəki sahəni istifadə et: Sisteminizdə\n"
-" Microsoft Windows qurulu isə ve bütün diski əhatə edir isə\n"
-" Linuks Mandrake ßçßn bir yer ayĹrmalĹsĹnĹz. Bunun ßçßn\n"
-" ya bütün diski silməlisiniz (\"Bütün diski sil\" bax ya da\n"
-" \" Usta modu\" tövsiyələri) ya da yenidən bölmələndirməlisiniz.Bu iş heç "
-"bir mə'lumat itkisi olmadan da edilə bilər.Bunun başqa adı\n"
-" eyni kompüterdə həm Linuks Mandrake həm də Windows qurulu olmasıdır.\n"
-"\n"
-"\n"
-"t Bu seçkiyə getmədən əvvəl bir şeyi başa düşməlisiniz ki, yenidən "
-"bölmələndirmə ilə sizin Windows bölməsi kiçiləcəkdir.\n"
-" Yə'ni Windows altında daha az disk sahəsinə malik olacaqsınız.\n"
-"\n"
-"\n"
-"* Usta modu: Əgər əllə diski bölmək istəsəniz, bu modu seçin. Diqqətli "
-"olun.\n"
-" Bu mod güçlüdür amma bir o qədər də təhlükəlidir. Diskinizdəki bütün "
-"bilgiyi asandlıqla itirə bilərsiniz.\n"
-" Təcrübəsiz isəniz bunu seçməyin."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Yeni yaradılan bütün bölmələr şəkilləndirilməlidir\n"
-"(şəkilləndirmək yəni fayl sistemi yaratmaq - format).\n"
-"\n"
-"\n"
-"Bu arada var olan hazır bölmələri də üstündəkiləri silmək üçünyenidən "
-"şəkilləndirmək istəya\n"
-"bilərsiniz.\n"
-"Bunu istəyirsinizsə bu bölmələri də seçməlisiniz.\n"
-"\n"
-"\n"
-"Bunu ağlınızda tutun ki var olan bütün bölmələri şəkilləndirmək\n"
-"məcburi deyil.\n"
-"İşlətim sistəmini əmələ gətirən bölmələri (yəni\n"
-"\"/\", \"usr\" və ya \"var\"ı yenidən şəkilləndirmək üçün\n"
-"seçə bilərsiniz. Verilər olan \"home\"u məsələ toxunulmadan\n"
-"buraxa bilərsiniz.\n"
-"\n"
-"\n"
-"Diqqətli olun. şəkilləndirdiyiniz bölmələrdəki verilər\n"
-"geri gəlməz.\n"
-"\n"
-"\n"
-"Şəkilləndirməyə hazır isəniz \"Oldu\" düyməsini tıqlayın.\n"
-"\n"
-"\n"
-"Yeni Linuks Mandrake sisteminizi qurmaq üçün başqa bölmə seçmək\n"
-"istəyirsiniz isə \"Ləğv et\" düyməsinə basın."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Təptəzə Linuks Mandrake sisteminizə qurulacaq. Bu da seçdiyiniz\n"
-"yükləmə böyüklüyünə və sistəminizin qabiliyyətinə görə\n"
-"bir neçə deqiqə alar.\n"
-"\n"
-"\n"
-"Xahiş edirik, səbrli olun."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu nöqtədə siz Linuks Mandrake yükləmək üçün bölmələri seçməlisiniz. Əgər "
-"əvvəldən bölmələr var isə (sistemdə əvvəllər qurulu olan GNU/Linuks "
-"bölmələri və ya başqa bölmələndirmə vasitələri ilə hazırladığınız bölmələr), "
-"onları seçin və istifadə edin.\n"
-"Yoxsa onları bildirməlisiniz.\n"
-"\n"
-"\n"
-"Bölmələri yaratmaq üçün əvvəlci diski seçməlisiniz.\n"
-"Diski seçmək üçün birinci IDE sürücüsü üçün \"hda\" nı, ikinciyi seçmək üçün "
-"\"hdb\"ni, birinci SCSİ sßrßcßsß ßçßn ise \"sda\" vs tĹqlamalĹsĹnĹz.\n"
-"\n"
-"\n"
-"Seçdiyiniz sürücüyə aşağıdakıları etməyə qadirsiniz:\n"
-"\n"
-" *Hamısını təmizlə: seçili sürücüdə bütün bölmələri silər.\n"
-"\n"
-"\n"
-" *Avtomatik: Sürücünüzdəki boş sahədə Ext2 və Swapbölmələrini avtomatik\n"
-"yaradar.\n"
-"\n"
-"\n"
-" *Bölmə cədvəlini qurtar: Zədələnmiş bölmə cədvəlinibərpa edər. Xahiş "
-"edirik\n"
-" diqqətli olun, çünkü bu da iflas edə bilər.\n"
-"\n"
-"\n"
-" *Gəri dön: İstəmədiyiniz seçkilərinizdən geri döndərər.\n"
-"\n"
-"\n"
-" *Yenidən yüklə: Bütün dəyişikliklərinizdən geri dönərbaşdakı bölmə "
-"cədvəlinə gələr.\n"
-"\n"
-"\n"
-" *Sehirbaz: Bölmələndirməyi bir sehirbaz edər. Təcrübəsizisəniz bunu "
-"seçin.\n"
-"\n"
-"\n"
-" *Floppy-dən bərpa et: Bölmə cədvəlini əvvəllər flopy-yə qeydetdiniz isə, "
-"bölmə cədvəlini bərpa edin.\n"
-"\n"
-"\n"
-" *Floppy-yə qeyd et: Daha sonradan bərpa etmek üçünbilgiləri floppy-yə qeyd "
-"edin.\n"
-" Bu seçki şiddətlə tövsiyə edilir.\n"
-"\n"
-"\n"
-" *Oldu: Bölmələndirmə bitdiyində, bunu seçərəkdəyişikliklərinizi qeyd "
-"edin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, istənilən seçkiyə Tab ve Aşağı/Yuxarı oxlarını da işlədərək "
-"klaviaturadan idarə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Bölmə seçildiyi zaman bunları işlədə bilərsiniz:\n"
-"\n"
-" *Ctrl-c yeni bölmə yaratmaq üçün (boş bölmə seçili olduğu zaman)\n"
-"\n"
-" *Ctrl-d bölməni ləğv etmək üçün\n"
-"\n"
-" *Ctrl-m bağlama nöqtəsini göstərmək üçün\n"
-"\n"
-"\n"
-"\n"
-"Əgər PPC kompüterdə qurulum aparırsınızsa, ən az 1 MBlıq balaca bir HFC "
-"'bootstrap' bölməsini yaboot açılış yükləyicisi üçün seçmək istəyəcəksiniz.\n"
-"Əgər daha çox yeriniz varsa ; məsələn 50 MB, onda bütün kernel və ramdisk "
-"əksini təcili açılış halları üçün saxlaya bilərsiniz."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sürücünüzdə bir və ya daha çox Windows bölməsi tapıldı.\n"
-"Xahiş edirik Linuks Mandrakeni qurmaq üçün onlardan birini "
-"yenidənölçüləndirmək üzərə seçin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, her bölmə bu cür sıralanıb; \"Linuks adı\",\"Windows\n"
-"adı\"\"Həcm\".\n"
-"\n"
-"\"Linuks adı\" bu cür kodlanıb: \"sürücü növü\", \"sürücü nömrəsi\",\"bölmə "
-"nömrəsi\" (məsələn, \"hda\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" sürücünüz IDE sürücü isə \"hd\"dirSCSI sürücü isə\n"
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yəni \"birinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yəni \"ikinci IDE idarəcisində ali sürücü\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sürücülərində \"a\" nın mənası \"birinci sürücü\",\n"
-"\"b\"nin mənası \"ikinci sürücü\"dür vs..."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Səbrli olun. Bu əməliyyat bir neçə deqiqə sürə bilər."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Xahiş edirik Linuks Mandrakenin daha əvvəlki buraxılışları qurulu deyilsə və "
-"ya müxtəlif əməliyyat sistemlərindən istifadə etmək istəyirsinizsə \"Yüklə\" "
-"seçin.\n"
-"\n"
-"\n"
-"Xahiş edirik qurulu olan Linuks Mandrakenin əvvəlki buraxılışını güncəlləmək "
-"istəyirsinizsə \"Güncəllə\" seçin.\n"
-"\n"
-"\n"
-"Sizin GNU/Linuks biliyinizdən asılı olaraq yükləmək və ya güncəlləmək üçün "
-"Linuks Mandrakenin aşağıdakı səviyyələrini seçə bilərsiniz:\n"
-"\n"
-"* Tövsiyə edilən: Əgər əvvəlcə heç GNU/Linuks ilə tanış olmadınız isə seçin. "
-"Yükləmə çox asand olacaq və çox az sual soruşulacaq.\n"
-"\n"
-"\n"
-"* Xüsusi: Əgə əvvəlcə GNU/Linuksa bir az aşina isəniz, seçin. Onda siz "
-"istədiyiniz sistem növünü (Masa üstü, Verici, Təcrübi) seçə biləcəksiniz.\n"
-" Əlbətdə sizə \"Tövsiyə edilən\" seçkidən daha çox sual soruşulacaq.\n"
-" Ona görə də GNU/Linuksa bir az aşina olmalısınız.\n"
-"\n"
-"\n"
-"* Usta: Əgər yaxşı bir GNU/Linuks biliyinə sahibsəniz, bu sinifi seçin.\n"
-" \"Xüsusi\" sinifindəki kimi işlədəcəyiniz sistemi (Masa üstü, Verici, "
-"Təcrübi)\n"
-" seçə biləcəksiniz. Amma sizi çox çətin suallar gözləyir. Bəzən bu sualların "
-"içindən\n"
-" çıxa bilmək çox zəhmətli olur. Ona görə də nə etdiyinizi bilirsəniz, bu "
-"sinifi seçin."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Xahiş edirik doğru qapını seçin. Məsələn, MS Windowsdakı COM1'in qarşılığı\n"
-"Linuksda ttyS0'dÄąr."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (Linuks Yükləyici) və Grub açılış sistem yükləyiciləridir: sistemi "
-"Linuks\n"
-"ya da kompüterinizdə olan başqa bir əməliyyatiyle aça bilərlər.\n"
-"Əsasən bu digər əməliyyat sistemləri doğru bir şəkilde təsbit edilib "
-"açılışa\n"
-"qurula bilərlər. Əgər bir problem olarsa, buradan əllə əlavə edilə "
-"bilərlər.\n"
-"Parametrlər mövzusunda diqqətli olun."
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Linuksu açmaq üçün lazımi bilgilərin harada saxlanılacağına qərar verin.\n"
-"\n"
-"Nə etdiyinizi bilmirsinizsə, \"Diskin ilk sektoru (MBR)\" seçin."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX PCI SCSI adapterleri axtarmağa cəhd edəcək. Əgə DrakX SCSI\n"
-"taparsa və hansı sürücü işlədiləcəyini bilərsə, her şey öz özünə\n"
-"qurulacaq.\n"
-"\n"
-"\n"
-"Əgər sisteminizdə SCSI adapteri yoxsa, DrakXin tanımayacağı bir\n"
-"ISA SCSI və ya PCI SCSI adapteri var isə, sizə sisteminizdə SCSI\n"
-"adapteri olub olmadığı soruşulacaq.\n"
-"Əgər SCSI adapteriniz yox isə, \"Yox\" tıqlayın. Əgər \"Var\"ı "
-"tÄąqlayarsanÄąz.\n"
-"qarşınıza sürücüləin siyahısı çıxacaq, oradan sizə uyanını seçərsiniz.\n"
-"\n"
-"\n"
-"Əgər əllə qurmağı səçərsəniz, o zaman DrakX sizə adapterin xüsusiyyətlərini\n"
-"soruşacaq. İmkan verin ki, DrakX sərbəstcə özü xüsusiyyətləri tapsın.\n"
-"Çoxunda bu işə yarayır.\n"
-"\n"
-"\n"
-"Əgər istəmirsəniz isə, o zaman adapter üçün xüsusiyyətləri özünüz\n"
-"göstərməlisiniz. Bunun üçün İstifadəçinin Əl Kitabçasına\n"
-"(başlıq 3, \"Avadanlığınız üçün kollektiv mə'lumat) bölməsinə\n"
-"baxın. Ya da avadanlığınızın əl kitabçasından və ya\n"
-"veb səhifəsindən (Əgər internetə çıxışınız var isə)\n"
-"ya da Microsoft Windowsdan (Əgər sisteminizdə qurulu isə)\n"
-"mə'lumat alın."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Burada yaboot üçün həm başqa əməliyyat sistemləri, həm alternativ "
-"kernellər,\n"
-" ya da təcili yardım açılış əksləri əlavə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Başqa OSlər üçün girişin mənası ad və kök çığırından ibarətdir.\n"
-"\n"
-"\n"
-"Linuks üçün mühtəməl girişlər bunlar ola bilər: \n"
-"\n"
-"\n"
-" - Ad: Bu sadəcə olaraq yaboot üçün açılacaq sistemi timsal edən bir "
-"addÄąr.\n"
-"\n"
-"\n"
-" - Əks: Bu isə açılacaq çəkirdəyin, yə'ni kernelin adıdır. Çox vaxt bu "
-"vmlinux və ya\n"
-"bunun variasiyalarÄądÄąr.\n"
-"\n"
-"\n"
-" - Kök: Linuks qurulumunun kök avadanlığı və ya '/'.\n"
-"\n"
-"\n"
-" \n"
-" - Əlavə: Apple avadanlıqlarında kernel əlavə seçənəkləri ilə sıxlıqla "
-"başlanğıc\n"
-"video avadanlığı və ya sıx sıx xəta verən 2ci və 3cü siçan düymələri üçün "
-"emulyasiya\n"
-"imkanları tanına bilir. Məsələn bunlar \n"
-"bir neçə nümunədir:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-" - Initrd: Açılış avadanlığından əvvəl bə'zi açılış modullarını seçmək\n"
-"üçün işlədilir, ya da təcili yardım açılışlarında ramdisk əksini yükləmək "
-"imkanÄą verir.\n"
-"\n"
-"\n"
-" - Initrd-size: Ana ramdisk böyüklüyü ümumiyyətlə 4096 baytdır. Əgər daha "
-"geniş ramdisk bildirə\n"
-"bilərsiniz isə bu seçənəyi işlədin.\n"
-"\n"
-"\n"
-" - Oxuma-yazma: Normalda sistemin 'dirilməsindən' əvvəl bə'zi sınaqların "
-"aparıla bilməsi üçün\n"
-"'root' fayl sistemi bu moda soxulur. Bu seçənəyi nəzərə almayabilərsiniz.\n"
-"\n"
-"\n"
-" - NoVideo: Bəlkə Apple video avadanlığı problem çıxarda bilər.Onda bu "
-"seçənəklə\n"
-"sistemi 'novideo' modda təbii framebuffer dəstəyi ilə aça bilərsiniz.\n"
-"\n"
-"\n"
-" - Əsas: Bu seçənəklə Linuks sistemi əsas əməliyyat sistemi halına gətirə "
-"bilərsiniz.\n"
-"Onda ENTER düyməsinə basmaqla Linuks sistemi açılacaqdır. Bu giriş ayrıca "
-"TAB ilə açılış seçkilərinə baxdığınız vaxt \n"
-"'*' işarətilə işıqlandırılacaqdır."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot NewWorld MacIntosh avadalığı üçün açılış idarəcisidir. Ayrıca\n"
-"GNU/Linuks, MacOS, və ya MacOSX sistemlərini kompüterinizdə varsa, "
-"açacaqdĹr.\n"
-"Normalda, bu əməliyyat sistemləri düzgün tapılıb qurula bilirlər\n"
-"Əgər belə olmazsa, bu ekrandan əllə lazımi qurğuları girə bilərsiniz.\n"
-"Düzgün parametrləri girib girmədiyinizi yaxşıca bir yoxlayın.\n"
-"\n"
-"\n"
-"Yaboot ana seçənəkləri:\n"
-"\n"
-"\n"
-" - Başlanğıc İsmarıcı: Açılışdan əvvəl çıxan sadə bir ismarıc.\n"
-"\n"
-"\n"
-" - Açılış Avadanlığı: GNU/Linuksu hardan başlatmaq istədiyinizi bildirir."
-"Ümumiyyətlə bu mə'lumatı daha əvvəl \"bootstrap\" quraşdırılması "
-"sırasındabildirmiş olacaqsınız.\n"
-"\n"
-"\n"
-" - Açıq Firmware Gecikməsi: LILOdan fərqli olaraq, yabootda iki dənə "
-"gecikmə vardır\n"
-"Birinci gecikmə saniyələrlə ölçülür və bu arada siz\n"
-"CD, OF açılışı, MacOS və ya Linuks arasında seçki aparmalısınız.\n"
-"\n"
-"\n"
-" - Kernel Açılış Vaxt Dolması: Bu vaxt dolması LILO açılış gecikməsinə "
-"uyğun gəlir. Linuksu\n"
-"seçdikdən sonra ana kernel parametri olaraq bu gecikmə 0.1 saniyə olaraq "
-"qurulu olacaqdÄąr.\n"
-"\n"
-"\n"
-" - CD Açılışı Fəallaşsınmı?: Bu seçənəklə CDdən açılışı timsal edən 'C' "
-"xarakteri ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-" - OF Açılışı Fəallaşsın?: Bu seçənəklə OFdən (Open Firmware) açılışını "
-"timsal edən 'N' xarakteri\n"
-"ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-" - Ana OS: OF gecikməsi müddəti dolduğu vaxt hansı OSnin açılacağını "
-"göstərir."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Linuks Mandrakeni yükləmak üçün sürücüyü seçin.\n"
-"Diqqətli olun, sürücüdəki bütün mə'lumatlar silinəcək\n"
-"və geri gəlməyəcək."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Sürücüdəki bütün bilgiləri və bölmələri silmək üçün\n"
-"\"Oldu\" düyməsinə basın. Diqqətli olun,\"Oldu\" düyməsinə basdıqdan sonra\n"
-"Windows bilgiləri də daxil olmaq üzərəbütün bölmə mə'lumatı geri dönməyəcək "
-"şəkildə silinəcək.\n"
-"\n"
-"\n"
-"Bölmədəki mə'lumatları qoruyaraq \"Ləğv et\" düyməsinə\n"
-"əməliyyatı ləğv edə bilərsiniz."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"bu vericiləri seçdiniz: %s\n"
-"\n"
-"\n"
-"bu vericilər əsasən fəallaşdırılır. Onların heç bir təhlükəsizlik\n"
-"problemləri yoxdur, amma bə'zi xətalar tapıla bilər. Belə olsa, mümükün olan "
-"ən yaxın zamanda güncəlləməlisiniz.\n"
-"\n"
-"\n"
-"Bu vericiləri qurmaq istəyirsiniz?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NİS domeyni olmadan translasiya işlədilə bilməz"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s sürücüsünə FAT şəkilləndirilmiş bir disket taxın"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Bu floppi FAT şəklində deyildir"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Bu saxlanmış paketlər seçkisini işlətmək üçün qurulumu ``linux "
-"defcfg=floppy''ilə başladın."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s faylı oxunurkan xəta oldu"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sisteminizdaki bə'zi avadanlıqlar işləməsi üçün düzgün sürücülərə ehtiyac "
-"duyar.\n"
-"Bunun haqqında %s də/a lazımi malumatları tapa bilərsiniz"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Bir root disk bĂślĂźmĂźna ehtiyacÄąnÄąz var.\n"
-"Bunun üçün istər mövcud bir disk bölümü üzərina tıqlayın, \n"
-"ya da yeni birini başdan yaradın. Sonra \"Bağlama \n"
-"Nöqtəsi\"nə gəlin va burayı '/' olaraq dəyişdirin."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Bir swap sahəniz yoxdur\n"
-"Davam edim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Bir swap sahəsinə ehtiyacınız var"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Boş sahəni istifadə et"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Var olan bölmələri işlədimmi"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Bölmə cədvəli qurtarılmağa çalışılır"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback üçün Windows bölməsini işlət"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linuks4Win'i qurmaq üçün hansı disk bölməsini istifadə edəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Böyüklüklərini seçin"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Kök (root) bölməsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap sahəsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Windows bölməsindəki boş sahəni işlət"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Hansı bölmənin böyüklüyünü dəyişdirəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Fat fayl sistemi uclarÄą hesaplanÄąr"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT tədqiqatçımız sizin bölümləri işlədə bilmir,\n"
-"bu xəta oldu: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Sizin Windows bölümü çox dağınıqdır. Daxiş edirik, əvvəlcə birləşdirin "
-"(defraq)"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"DİQQƏT!\n"
-"\n"
-"DrakX \"Windows\" disk bölmənizin böyüklüyünü dəyişdirəcək. Bu iş \n"
-"tehlükəli ola bilər. Aşina deyil isəniz qurulumdan çıxın və \"Windows\" \n"
-"altında \"Scandisk\" (lazım gələrsə \"defrag\" da) proqramını çalışdırın. "
-"ArdÄąndan quruluma \n"
-"davam edin. Verilərinizin yedəyini almağı da unutmayın!"
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Hansı sektora daşımaq istəyirsiniz?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "bölmə %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT böyüklüyü dəyişdirilməsi bacarılmadı: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "BĂźtĂźn diski sil"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "\"Windows\"u sil"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sizin birdən çox diskiniz var, linux qurmaq üçün hansını istifadə "
-"edəcəksiniz?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"%s bölüməsinin böyüklüyü dəyişdirildikdən sonra bu bölmədəki bütün "
-"mə'lumatlar silinəcəkdir"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Hazırkı disk bölmələndirməsi"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Fdisk istifadə et"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"İndi %s sabit diskinizi bölmələndirə bilərsiniz\n"
-"İşinizi bitirdiyinizdə `w' ilə qeyd etməyi unutmayın"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Heç Windows disk bölməniz yoxdur!"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX bölmə sehirbazı bu yolu tapdı:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Bölmə cədvəli növü: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Şəbəkə fəallaşdırılır"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Bir xəta oldu, fəqət necə düzəldiləcəyini bilmirəm.\n"
-"Davam edin, riski sizə aitdir!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s bağlama nöqtəsini çoxalt"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Bəzi paketlər doğru olaraq qurulumu bitirmədi.\n"
-"cdrom sürücünüz ya da cdromunuz düzgün işləmir.\n"
-"Əvvəldən Linuks qurulu bir sistemdə \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
-"istifadə edərək Cd-Rom'u yoxlayın.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s Sisteminə Xoşgəlmişsiniz"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Disket sĂźrĂźcĂź yoxdur"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Başlanğıc addımı `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sizin sisteminizin qaynaqları çatışmır. Qurulum ərzində problem yaşaya "
-"bilərsiniz\n"
-"Bu baş verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun üçün "
-"dəCDROMdan başlatdığınız zaman,\n"
-" 'F1'ə basın və 'text' yazaraq enter'ə basın."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Qurulum Sinifi"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Xahiş edirik aşağıdakı qurulum siniflərindən birisini seçiniz:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Seçdiyiniz paket qruplarının ümumi böyüklüyü təximən %d MBdır.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Bu böyüklükdən daha azını yükləmək istəsəniz,\n"
-"qurmaq istədiyiniz paket faizini seçin.\n"
-"100%%'i seçərsəniz bütün paketlər qurulacaqdır."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sabit diskinizdə bu paketlərin sadəcə olaraq %d%%'sini quracaq qədər yer "
-"var.\n"
-"Bundan daha azını qurmaq istəsəniz,\n"
-"daha az bir faiz sadəcə ən vacib paketləri ;\n"
-"%d%% isə qurula biləcək bütün paketləri quracaqdır."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Sonrakı addımda daha geniş bir seçki qabağınıza gələcəkdir."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Qurulacaq paketlərin faizi"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Fərdi paket seçkisi"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ümumi böyüklük: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Xətalı paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ad: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Buraxılış: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "BĂśyĂźklĂźyĂź: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Əhəmiyyət: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Bu paketi seçə bilməzsiniz, çünki qurmaq üçün yer çatmır."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Aşağıdakı paketlər qurulacaqdır"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Aşağıdakı paketlər sistemdən silinəcəklər"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Bu lazımlı bir paketdir, sistemdən çıxardıla bilməz"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuşdur."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Bu paketi sistemdən çıxarda bilməzsiniz. Yenilənməlidir"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Avtomatik seçili paketləri göstər"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Qurulum"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Disketə qeyd et"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Qurulumdan çĹx"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Qurmaq istədiyiniz paketləri seçin"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Qurulur"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Təxmini olaraq hesaplanır"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Qalan müddət"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketi qurulur"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Qəbul Et"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rədd Et"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Romu dəyişdirin!\n"
-"\n"
-"\"%s\" adlı Cd-Romu sürücünüzə taxın və OLDU'ya basın.\n"
-"Əgər Cd-Rom əlinizdə deyilsə bu Cd-Rom'dan qurmamaq üçün İMTİNA ET'ə basın."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Yenə də davam edək?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Paketləri istərkən bir xəta oldu:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Paketlər qurulurkən bir xəta oldu:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a şəbəkə. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Bir xəta oldu"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisenziya sözləşməsi"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Linuks-"
-"Mandrake distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Linuks-Mandrake distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Linuks-Mandrake sites which are prohibited or restricted in "
-"some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Linuks-Mandrake\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "BĂźtĂźn mĂśvcud klaviaturalarÄąn siyahÄąsÄą"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Hansı qurulum sinifini istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Qurulum/Güncəlləmə"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Bu bir qurulum mu, yoxsa güncəlləməmidir?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Tövsiyə edilən"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Usta"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Güncəlləmə"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Siçan QapĹsĹ"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Düymə emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Düymə 2 emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Düymə 3 emulyasiyası"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kartlar qurulur..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE qapÄąlarÄą qurulur"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "uyğun bölmə tapılmadı"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Bağlama nöqtələri üçün bölmələr daranır"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Bağlama nöqtələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Bölmə cədvəlinizi oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xarab olmuş bolmələri düzəltməyə çalışacam.\n"
-"Amma bütün mə'lumatlar itəcəkdir.\n"
-"Başqa bir yol isə DrakXin bölmə cədvəllərini yoxlamasını "
-"passivləşdirməkdir.\n"
-"(xəta %s)\n"
-"\n"
-"Bütün bölmələri itirmək istəyirsiniz?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake bölmə cədvəlini oxumağı bacara bilmədi.\n"
-"Özünüz davam edə bilərsiniz."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Kök (root) Bölməsi"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Sisteminizin kök (/) bölməsi hansıdır?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bölmə cəvəlindəki dəyişikliklərin daxil olması üçün kompüterinizi yenidən "
-"başlatmalısınız."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Xətalı bloklar sınansınmı?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Bölmələr şəkilləndirilir"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s faylı yaradılır və şəkilləndirilir"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Qurulumu bitirmək üçün lazımi sahə yoxdur, xahiş edirik əlavə edin"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Mövcud olan paketlər axtarılır."
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Güncəllənəcək paketlar tapılır"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Sisteminizdə qurulum ya da güncəlləmə üçün lazımi boş yer yoxdur(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "HamÄąsÄą (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Ən az (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Tövsiyə edilən (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Disketdən geri çağır"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Disketdən geri çağır"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Disketə qeyd et"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Seçili bÜyßklßk var olandan daha bÜyßkdßr"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Aşağıdakı siyahıdakı bütün CD'lərə sahib isəniz, OLDU'ya basın.\n"
-"CD'lərin heç birinə sahib deyilsəniz, İMTİNA ET'ə basın.\n"
-"CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya "
-"basÄąn."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" adlÄą Cd-Rom"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Qurulum hazÄąrlanÄąr"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketi qurulur\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Qurulum sonrası qurğular"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"İndi şifrləmə üçün istifadə ediləcək tə'minatı endirə bilərsiniz.\n"
-"DİQQƏT:\n"
-"\n"
-"Bu tə'minata bə'zi fərqli ümumi ehtiyaclardan və müxtəlif\n"
-"mühakəmə haqlarından ötrü, bu tə'minatın son istifadəçisi, qanunların ona "
-"bu\n"
-"tə'minatı internetdən endirmə və saxlama haqqını verdiyindən əmin "
-"olmalÄądÄąr.\n"
-"\n"
-"Əlavə olaraq, müşdəri va/və ya son istifadəçi xüsusilə, yerləşdiyi mühakəmə "
-"yerinin\n"
-"qanunlarını çeynəmədiyindən əmin olmalıdır. Müşdəri və/və ya son istifadəçi\n"
-"qanunların əmr etdiyi şərtləri pozduğu zaman ciddi cəzalara\n"
-"mə'ruz qalacaqdır.\n"
-"\n"
-"Xüsusi ya da dolaylı zərərlərə (gəlir azalması, işin pozulması, ticari "
-"mə'lumat\n"
-"itkisi və digər maddi itkilər) yol açan heç bir hadisədə nə Mandrakesoft, nə "
-"də \n"
-"istehsalatçıları və/va ya qaynaq vericiləri məs'ul tutulmazlar. Bu "
-"tə'minatı\n"
-"internetden endirirkən son istifadəçi bu sözləşməyi qəbul etdiyini \n"
-"bəyan etmiş sayılır.\n"
-"\n"
-"\n"
-"Bu sözləşməylə əlaqədər hər cür sual üçün xahiş edirik\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA\n"
-"ĂźnvanÄąna yazÄąnÄąz."
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Əks ünvanına bağlantı qurulur"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri almaq üçün bir əks ünvanı seçin"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Əks ünvanına bağlantı qurulur"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Sisteminiz hansı məqsədlə istifadə ediləcək?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Avadanlıq saatınız GMT-yə göra quruludur mu?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS Verici"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Çap Edicisiz"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Başqa var?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Mündəricat"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Siçan"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vaxt Dilimi"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Çap Edici"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartÄą"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Səs kartı"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartÄą"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "NIS istifadə et"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Yerli Çap Edici"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root parolunu qur"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Parolsuz"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Bu parol çox sadədir (en az %d xarakter boyunda olmalıdır)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "TanÄątma"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "TanÄątma"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Verici"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS sahəsi"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Verici"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lĂźzĂźm\n"
-"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanÄąz,\n"
-"ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaişləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyə disket "
-"yerləşdirin\n"
-"və \"OLDU\" basın."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Ä°lk disket sĂźrĂźcĂź"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Ä°kinci disket sĂźrĂźcĂź"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Nəzərə Alma"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lĂźzĂźm\n"
-"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanÄąz,\n"
-"ya da başqa bir əməliyyat sistemi liloyu silərsa ya da lilo "
-"avadanlığınızlaişləməzsə\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rəsmini\n"
-"istifadə edərək də bu disket yaradıla bilər.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyədisklet "
-"yerləşdirin\n"
-"və \"OLDU\" basın.\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Bağışlayın, disket sürücü yoxdur"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Açılış disketi yaratmaq üçün istifadə ediləcək disket sürücüyü seçin"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "%s sürücüsünə bir disket taxın"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Açılış disketi yaradılır"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Açılış yükləyici hazırlanır"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot qurulumunda xata, \n"
-"ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Sistem yükləyicini qur"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Açılış yükləyicisi qurulumu iflas etdi. Xəta:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Siz Open Fİrmware açılış avadanlığınızı açılış yükləyicisini\n"
-"fəallaşdırmaq üçün dəyişdirməli ola bilərsiniz. Əmr-Seçənək-O-F düymələrini\n"
-" yenidən başlarkən basın və bunları girin:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Sonra da bunlarÄą yazÄąn: shut-down\n"
-"Bir sonrakı başlanğıcda açılış yükləyicisi sətirini görməlisiniz."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Avtomatik qurulum disketi hazÄąrlanÄąr"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bə'zi bölmələr bitdi.\n"
-"\n"
-"Həqiqətən də çıxmaq istəyirsiniz?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-#, fuzzy
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Təbriklər, quruluş bitdi.\n"
-"Cdrom və disketi çıxartdıqtan sonra Enter'ə basaraq kompüterinizi \n"
-"yenidən başladın. Linuks Mandrake'nin bu buraxılışındakı yamaqlar haqqında \n"
-"mə'lumat almaq üçün http://www.mandrakelinux.com ünvanından Errata'ya "
-"baxÄąn.\n"
-"Sisteminizin qurğuları haqqında daha geniş bilgiyi Linuks Mandrake \n"
-"İstifadəçi Kitabcığında tapa bilərsiniz."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Avtomatik qurulum disketi hazÄąrlanÄąr"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Avtomatik qurulum disketi hazırlanması seçilərsə,\n"
-"bütün sabit disk mə'lumatı daxil ediləcəkdir!!\n"
-"(yə'ni başqa sistemi də qura bilmək üçün).\n"
-"\n"
-"Bu qurulumu takrar etmək istəyə bilərsiniz axı.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Avtomatlaşdırılmış"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Təkrarla"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Paket seçkilərini saxla"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrake Qurulumu %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> irəli/geri | <Boşluq> işarətlə | <F12> sonrakı ekran"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu əksikdir"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Monitorunuzu seçin"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Ətraflı"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Xahiş edirik gözləyin"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Mə'lumat"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ağacı Aç"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Ağacı Qapat"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Otaq və grup sıralaması arasında gəz"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Xətalı tərcih, təkrar sınayın\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Seçənəklər: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Seçkiniz? (əsas %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Çex dili (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Almanca"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Ä°spanca"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fincə"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "FransÄązca"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveçcə"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polyakca"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusca"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "İsveçcə"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Ä°ngiliz (UK) klaviaturasÄą"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Amerikan (US) klaviaturasÄą"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Farsca"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Ermenicə (köhnə) "
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Ermenicə (yazı maşını)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Ermenicə (fonetik)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azərbaycanca (latın)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belçika dili"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Ermenicə (fonetik)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulqarca"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilya dili (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusca"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "İsveçcə (Alman sırası)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "İsveçcə (Fransız sırası)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Çex dili (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Almanca (ölü düymələr olmasın)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danimarka dili"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveçcə)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniya dili"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "GĂźrcĂź dili (\"Rus\" sÄąrasÄą)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "GĂźrcĂź dili (\"LatÄąn\" sÄąrasÄą)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Yunanca"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Macarca"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "XÄąrvatca"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Ä°srail"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Ä°srail (Fonetik)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Farsca"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Ä°zlandiya dili"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Ä°talyanca"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Yaponca 106 düyməli"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreya klaviaturasÄą"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "LatÄąn Amerika dili"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvaniya dili AZERTY (köhnə)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanya dili AZERTY (yeni)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Yeri"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedoniya dili"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollandiya dili"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polyakca (QWERTY sÄąrasÄą)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polyakca (QWERTZ sÄąrasÄą)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portuqalca"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "FransÄązca (Kanada/Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusca (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovencə"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakca (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakca (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azərbaycanca (kiril)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Cədvəl"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai klaviatura"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai klaviatura"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkcə (ənənəvi \"F\" klaviatura)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkcə (müasir \"Q\" klaviatura)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrayna dili"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klaviaturası (beynəlmiləl)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vyetnam dili \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavca (latÄąn/kiril)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Dairəvi bağlama %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Məntiqi ciltləri birinci olaraq sil\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Siçan"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Sıravi PS2 Çərxli Siçan"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 düymə"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Sıravi 2 Düyməli Siçan"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Ümumi"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Çərx"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Sıravi 3 Düyməli Siçan"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serial ya da köhnə C7 növü)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 düyməli"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 düyməli"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "heç biri"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "SiçansĹzs"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Siçanınızı işə salmaq üçün,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "TƏKƏRİ OYNADIN!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Qurtar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "SonrakÄą ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Əvvəlki"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Doğrudur?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "İnternetə bağlan"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"ADSL ilə internetə bağlanmanın ən yaxşı yolu pppoe'dur.\n"
-"Bəzi bağlantılar pptp istifadə edir, çox azı isə dhcp işlədir.\n"
-"Bilmirsiniz isə 'pppop istifadə et'i seçin"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp istifadə et"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe istifadə et"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptpe istifadə et"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hansı dhcp alıcısını istifadə edəcəksiniz?\n"
-"Əsası dhcpcd dir"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Sisteminizdə heç bir eternet şəbəkə adapteri tapıla bilmədi.\n"
-"Bu bağlantı şəklini qura bilmərəm."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Şəbəkə ara üzünü seçin"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "şəbəkə kartı tapılmadı"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Şəbəkə Qurğuları"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Xahiş edirik kompüterinizın adını girin.\n"
-"Məsələn``kompüteradı.sahəadı.com''.\n"
-"Əgə şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ev sahibi adÄą"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Şəbəkə Quraşdırılması Sehirbazı"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Xarici ISDN kart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Daxili ISDN kart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ISDN bağlantınızın növü nədir?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN quraşdırılması"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"İnternet xidmət vericinizi seçin.\n"
-"Siyahıda deyilsə Siyahıda deyil'i seçin."
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Açılış Protokolu"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Avropa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "BĂźtĂźn dĂźnya"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"BĂźtĂźn dĂźnya \n"
-" D-Channel'lə xaric (kiralıq xətlər)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Hansı protokolu istifadə etmək istəyirsiniz?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "HansÄą nĂśv kartÄąnÄąz var?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Bilmirəm"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ISA kartınız var isə sonrakı ekrandakı qiymətlər doğru olmalıdır.\n"
-"\n"
-"PCMCIA kartınız var isə kartınızın irq və ya io'sunu bilməlisiniz.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "DayandÄąr"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Davam et"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "HansÄąsÄą sizin ISDN kartÄąnÄązdÄąr?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI kart tapdım, amma növünü bilmirəm. Xahiş edirik sonrakı ekrandakı "
-"kartlardan birini seçin."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heç bir ISDN PCI kart tapĹlmaĹ. SonrakĹ ekrandakĹlardan seçin."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Çevirməli şəbəkə seçənəkləri"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Bağlantı adı"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefon nömrəsi"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Giriş adı"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skript əsaslı"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal əsaslı"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Sahə(domain) adı"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Birinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "İkinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Bağlantınızı yenidən quraşdıra bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Artıq İnternetə bağlısınız."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"İstəsəniz İnternetə bağlana bilərsiniz ya da yeniden quraşdıra bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Hələ İnternetə bağlı deyilsiniz."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Bağlan"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Bağlantını kəs"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Şəbəkəni qur"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "İnternet bağlantısı & quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Bağlantınızı kəsə bilərsiniz. Ya da bağlantını yenidən də quraşdıra "
-"bilərsiniz."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Şəbəkədən quraşdırması apardığınız üçün şəbəkəniz artıq qurulmuş olmalıdır.\n"
-"Şəbəkə/İnternet bağlantınızı yenidən quraşdırmaq üçün Oldu'ya yoxsa Ləğv "
-"et'ə basın.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Şəbəkə Quraşdırma Sehirbazına Xoç Gəldiniz\n"
-"\n"
-"İnternet/Şəbəkə qurğularınızı edəcəyik.\n"
-"Avtomatik təsbit istəmirsiniz isə işarəti qaldırın.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Qurulacaq profili seçin"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Avtomatik təsbit işlət"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "AvadanlÄąqlar tanÄąnÄąr..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normal modem təsbiti"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "%s qapÄąsÄąnda tapÄąldÄą"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN Bağlantısı"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s tapÄąldÄą"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "%s ara üzündə tapıldı"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabel bağlantısı"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kabel bağlantısı"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "eternet kart tapÄąldÄą"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Şəbəkənin yenidən başladılması sırasında xəta oldu: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Təbrik edirik, internet və şəbəkə quraşdırılması qurtardı.\n"
-"\n"
-"Qurğular indi sisteminizə əlavə ediləcək.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n"
-"verici adı xəsarətləri meydana gələ bilər."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"DİQQƏT: Bu avadanlıq daha əvvəl İntenetə bağlanmaq üçün qurulmuşdur.\n"
-"Avadanlığın qurğularını dəyişdirmaək istəmirsiniz isə,\n"
-"OLDU ya basÄąn.\n"
-"Aşağıdakı girişləri düzəltməniz özünü əvvəlki qurğuların üstünə yazacaqdır."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr "Xahiş edirik bu kompüter üçün IP qurğularını girin"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "%s şəbəkə avadanlığı qurulur"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (sĂźrĂźcĂź %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ĂźnvanÄą"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Avtomatlaşdırılmış IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Xahiş edirik kompüterinizn adını girin.\n"
-"Məsələn``kompüteradı.sahəadı.com''.\n"
-"Əgər şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS verici"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Keçit avadanlığı"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Vəkil vericilər quraşdırılması"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP vəkil verici"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP vəkil verici"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Vəkil verici http://... şəklində olmalıdır."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Vəkil verici ftp://... olmalıdır."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "İnternete girişi indi sınamaq istəyirsiniz?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Bağlantınız sınanır..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "İnternetə artıq bağlısınız"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Təhlükəsizlik səbəbi ilə indi bağlantı qopacaqdır."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sisteminiz İnternetə bağlı deyil.\n"
-"Bağlantını yenidən quraşdırın"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Bağlantı quraşdırılması"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Xahiş edirik aşağıdakıları doldurun ya da seçin"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kart IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kart mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kart IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kart IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kart IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Sizin şəxsi telefon nömrəniz"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "İnternet xidmət vericinizin adı (məsələn azeronline.com)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "İXM telefon nömrəsi"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns xidmətcisi 1 (arzuya görə)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns xidmətcisi 2 (arzuya görə)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "KlaviaturanĹzĹ seçin"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Yığma modu"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Bağlantı növü:"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Bağlantı növü:"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Hesab Girişi (istifadəçi adı)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Hesap Parolu"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "bağlama iflas etdi: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Bu platformda genişlədilmiş bölmələr dəstəklənmir"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Bölmə cədvəlinizdə bir boşluq var, amma o da işlədilə bilməz.\n"
-"Bu boşluğu, birinci bölmənizi en yaxınındakı genişlədilmiş bölməyə "
-"daşıyaraq\n"
-"məsələni həll edə bilərsiniz."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s faylından qurtarılışda xəta: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s faylına yazarkən xəta oldu"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Bə'zən sürücünüzdə pis şeylər ola bilər.\n"
-"DatanÄąn bĂźtĂśvlĂźyĂź yoxlamasÄą bacarÄąlmadÄą. \n"
-"Bu o demekdir ki diskə yazılan hər şey təsadüfi olacaqdır"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "alÄąnmalÄą"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "vacib"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "əla"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "gözəl"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "bəlkə"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Uzaq çap edici vericisi(lpd)"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Şəbəkə Çap Edicisi (soket) "
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Çap Edici Vericisi"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Yerli Çap Edici"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "%s faylına yazarkən xəta oldu"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS verici IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Əsas)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Çap ediciniz nə şəkildə bağlıdır?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Uzaq CUPS vericiləri üçün heç bir quraşdırmağa lüzüm yoxdur\n"
-"Buradakı hər çap edici avtomatik tapılacaqdır.\n"
-"Olmazsa \"Uzaq CUPS vericisi\" ni seçin."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS verici IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "QapÄą"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "AvadanlÄąqlar tanÄąnÄąr..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "QapÄąlarÄą sÄąna"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Avtomatik təsbit işlət"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s tapÄąldÄą"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Quraşdırma"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "%s paketi qurulur"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "%s paketi qurulur"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "CUPS sĂźrĂźcĂź datasÄą oxunur..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "CUPS sĂźrĂźcĂź datasÄą oxunur..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Uzaqdakı bir lpd çap edici növbəsini istifadə etmək üçün, \n"
-"çap edicinin bağlı olduğu çap edici vericisinin adını və növbə \n"
-"adınını verməlisiniz."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "UzaqdakÄą ev sahibi adÄą"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "UzaqdakÄą ev sahibi adÄą"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "UzaqdakÄą ev sahibi adÄą"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Çap Edici Seçənəkləri"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Bir SMB çap edicidən yekun almaq üçün, SMB kompüter adı, çap edici "
-"vericisinin\n"
-"IP ünvanı, çap edicinin paylaşdırma adı, işləmə grupu, istifadəçi adı və \n"
-"parol verilməlidir."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB verici adÄą"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB verici IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Paylaşdırma adı"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "İş qrupu"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare Çap Edici Qurğuları"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare çap edicidən yekun almaq üçün, NetWare vericisinin adı və çap "
-"edici \n"
-"növbəsi adı ilə istifadəçi adı va parolu verilməlidir."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Çap Edici Vericisi"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Çap Edici Növbə Adı"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Soket Çap Edici Qurğuları"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Soket çap edicidən yekun almaq üçün, çap edicinin ev sahibi adını ve "
-"mümkünsə, qapısının nömrəsini verməlisiniz."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Çap Edici Ev sahibi"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Çap Edici Ev sahibi"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Çap Edici avadanlığı URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Çap edici adı"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Ä°zah"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Yeri"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "CUPS sĂźrĂźcĂź datasÄą oxunur..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Doğrudur?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Çap Edici Bağlantısı"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Nə cür bir çap ediciniz var?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Çap edicini sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "QapÄąlarÄą sÄąna"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Bəli, hər iki sınaq səhifəsini də çap et"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Çap Edici"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standart"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"Çap vəziyyəti:\n"
-"%s\n"
-"\n"
-"Düz mü işləyir?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"Düz mü işləyir?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Qapat"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Şəbəkə dayandırılır"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Çap edici seçənəkləri"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "CUPS sĂźrĂźcĂź datasÄą oxunur..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Çap edici adı təkcə hərf, rəqəm və alt xətt daxil edə bilər"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Çap Edicisiz"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "CUPS sĂźrĂźcĂź datasÄą oxunur..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Bağlantınız başladılır..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Şəbəkəni qur"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor qurulmayÄąb"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Şəbəkə Qurğuları"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Yüksək"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Şübhəci"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hansı çap edici sistemini istifadə etmək istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Çap Edicini Qur"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "%s paketi qurulur"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Çap edici seçənəkləri"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "CUPS sĂźrĂźcĂź datasÄą oxunur..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Çap Edicini Qur"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Bir çap edici qurmaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Çap Edici"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aşağıda yazıçıdakı növbələr verilmişdir.\n"
-"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aşağıda yazıçıdakı növbələr verilmişdir.\n"
-"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Şəbəkəni qur"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normal Mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Çap Edici Bağlantısı"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Sınaq səhifəsi çap edilir..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Uzaq Çap Edici"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "CUPS sĂźrĂźcĂź datasÄą oxunur..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Yerli Çap Edici"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "CUPS sĂźrĂźcĂź datasÄą oxunur..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Vəkil vericilər quraşdırılması"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "QapÄą"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Vəkil verici http://... şəklində olmalıdır."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Vəkil verici ftp://... olmalıdır."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Avtomatik Giriş"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Parol"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Parolsuz"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Parollar uyğun gəlmir"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Şəkilləndirilmiş RAID md%d-yə disk bölməsi əlavə edilə bilinmədi"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "%s faylına yazıla bilinmədi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid iflas etdi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid iflas etdi (raidtools əksik ola bilər mi?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d səviyyə RAID üçün çatmayan sayda disk bölməsi\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA səs sistemini (Advanced Linux Sound Architecture) başlat"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anakron, periodik əmr zamanlayıcısı"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd batareya vəziyyətini izləmək üçün və syslog aracılığıyla bunun qeydini "
-"tutmaq üçün istifadə edilir.\n"
-"Ayrıca batareya azaldığında sistemi qapatmaq üçün də istifadə edilir."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at əmri, zamanlanan əmrləri işləmələri lazım gələn vaxtda işlədir.\n"
-"Sistem yükü lazımi qədər alçaq olduğunda yığma əmrləri işlədilir."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, istifadəçilərə xüsusi əmrləri periodik olaraq işə sala bilən\n"
-"standart bir UNIX proqramıdır. vixie cron, standart cron'a əlavə edilmiş bir "
-"çox\n"
-"yeni xüsusiyyət daxildir."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə "
-"edər.\n"
-"Ayrıca konsolda siçanla kəsmə və yapışdırma əməliyyatlarına da imkan verər.\n"
-"Konsolda pop-up menyu dəstəyi verər."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake texniki tə'minat sınağı aparar və onları bir ön quraşdırmadan "
-"keçirər."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi üçün "
-"istifadə edilir."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (qĹsaca inetd ) bir çox \n"
-"başqa internet xidmətcisini lazım gəldiyi zaman işa salır. İçində telnet, "
-"ftp, rsh və rlogin kimi proqramın olduğu xidmətləri işə salmaqla məs'uldur.\n"
-"inetd-ni sistemden çıxarmaq, onun məs'ul olduğu bütün xidmətləri\n"
-"rədd etmək mənasını daşıyır."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Linuks 2.2 seriyası çəkirdəklərində firewall\n"
-"qurmaq üçün üçün paket süzülməsini başlat."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura düzülüşünü yüklər.\n"
-"Hansı klaviatura düzülüşü istifadə ediləcəyi kbdconfig ilə seçilir.\n"
-"Bu, mandrake qurulan bir çox kompüterdə fəal buraxılmalıdır."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h ßçßn \n"
-"/boot-da avtomatik çəkirdək başlığı yaradılması."
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Texniki avadanlığın açılışda avtomatik təsbiti və qurulması."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf sistem qurğularınızı idarə edən proqramları\n"
-"müxtəlif vəzifələri açılışda icra edər."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd, lpr'nin düzgün olaraq işləməsi üçün lazımi çap edici vasitəsidir.\n"
-"lpd əsasən, çap vəzifələrini idarə edən və onları çap ediciyə göndərən "
-"vericidir."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linuks Virtual Verici, yüksək qabiliyyətli vericilər qurmaq üçün işlədilir."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) verici adlarını IP ünvanlarına çevirən\n"
-"Sahə Adı Vericisidir(DNS)."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Bütün Şəbəkə Fayl Sistemlərini (NFS), SMB (Lan Manager/Windows), və \n"
-"NCP (NetWare) bağlama nöqtələrini bağlar və ayırır."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Açılış sırasında başlamaq üçün qurulmuş bütün şəbəkə axtar üzlərini "
-"fəallaşdırır ya da qapatır."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir "
-"protokoldur.\n"
-"Bu xidmət, /etc/exports faylında qurğuları olan NFS vericisinin\n"
-"istifadəsinə imkan verər."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir \n"
-"protokoldur. Bu xidmət NFS fayl qıfılı istifadəsinə imkan verər."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Açılışda XFree və konsolda numlock düyməsini\n"
-"avtomatik olaraq aç."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w və uyğun Windows çap edicilərini dəstəklə."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA dəstəyi, laptoplarda eternet və modem kimi avadanlıqların "
-"dəstəklənməsinə imkan verər.\n"
-"Qurulmadığı vaxtda açılışda işləməz, işləməsinə ehtiyac olmayan\n"
-"kompüterlərdə qurulu olması problem yaratmaz."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper, NFS ve NIS kimi protokollar tərəfindən istifadə edilən RPC \n"
-"bağlantılarını təşkilatlandırır. Portmap vericisi RPC mexanizmini işlədən\n"
-"protokollarla xidmət edən kompüterlərdə qurulmalıdır və işlədilməlidir."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Posfix, elektronik məktubların bir kompüterdən digərinə yollayan \n"
-"Elektronik Məktub Yollama Vasitəsidir."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Yüksək keyfiyyət təsadüfi rəqəm istehsal edən sistem entropi hovuzunun \n"
-"saxlanması və yenidən köhnə halına gətirilməsinə imkan verər."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed vasitəsi avtomatik IP router cədvəlinin RIP protokolu tərəfindən\n"
-"yenilənməsinə imkan verər. RIP əsasən kiçik şəbəkələrdə istifadə edilir, "
-"daha bĂśyĂźk\n"
-"şəbəkələrdə daha qarışıq routing protokollarına ehtiyacı vardır."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı hər hansı bir\n"
-"kompüter haqqındakı qabiliyyət ölçüləri ala bilmələrinə imkan verər."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı kompüterlərdə\n"
-"işləyən istifadəçiləri görməsinə imkan verər."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokolu, uzaq istifadəçilərin, rwho vasitəsi işlədən bir kompüterdə\n"
-"olan bütün istifadəçiləri görmələrina imkan verər."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Kompüterinizdə səs sistemı başladın"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog, bir çox vasitənin ismarıclarını müxtəlif sistem qeydlərində\n"
-"tutmalarına imkan verər. Syslog'un hər zaman işləməsi\n"
-"yaxşı fikirdir."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "USB avadanlığınız üçün sürücüləri yükləyin."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X Font Vericisini açılışda işə salar (Bu, XFree icrası üçün məcburidir)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Açılışda avtomatik olaraq başlayacaq xidmətləri seçin"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Çap Edici"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Ä°nternet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistem modu"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Databeyz"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "avadanlÄąq"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "işləmir"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "dayandÄąrÄąlÄąb"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Xidmətlər və vasitələr"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Bu xidmət haqqında təəsüf ki,\n"
-"əlavə mə'lumat yoxdur."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Açılışda"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Hal:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "BĂźtĂźn dĂźnya"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Ä°nternet imkanÄą"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedya - Qrafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Təcrübi"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "İdarə Mərkəzi"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB verici adÄą"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Oyunlar"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Usta"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "%s paketi qurulur"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Bölmə cədvəlini oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xəsərli hissələri düzəltməyə cəhd edəcəm"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Xəta"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Qurulum sonrası qurğular"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Təbriklər!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Qurulum"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Loopback faylı şəkilləndirilir: %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Növbəni sil"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "\"Windows\"u sil"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Xahiş edirik təkrar sınayın"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Parolsuz"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Çap Edici Bağlantısı Seçin"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Sabit disk seçkisi"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Çərx"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Çərx"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Modul seçənəkləri:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Seçənəklər"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Disketdən geri çağır"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Digər"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Sistemi qur"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "XĂźsusi"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_YardÄąm"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Əvvəlki"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Hal:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Fayldan geri çağır"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "SonrakÄą ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Qurulacaq paketləri seçin"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Xətalı yedəkləmə faylı"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Fayla qeyd et"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Şəbəkə quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s qurulumu iflas etdi. Olan xəta:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "şəbəkə kartı tapılmadı"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "QurtardÄą"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Qurulum hazÄąrlanÄąr"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "məhdudlaşdır"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "məhdudlaşdır"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Bölmə şəkilləndirilməsi"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Bağlama nöqtəsi"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "İş Yeri"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "DayandÄąr"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Çap Edici"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Sistemi qur"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Fayl seç"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Uzaq Çap Edici"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Ä°nit Ä°smarÄącÄą"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Qurulum"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Qurulumdan çĹx"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi fəallaşdırıldı"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq fəallaşdırılmışdır.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "passivləşdir"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "keç"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "yenidən quraşdır"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Vericilər bağlanır..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi bağlandı"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi passivləşdirildi"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq passivləşdirilmişdir.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "fəallaşdır"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Xidmətlər fəallaşdırılır..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi açıldı"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n"
-"Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet "
-"bağlantınızdan faydalana biləcəklər.\n"
-"\n"
-"Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə "
-"ehtiyacÄąnÄąz var."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ara Üz %s (%s modulu işlədilir)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Ara Ăźz %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Sisteminizdə şəbəkə kartı tapıla bilməyib.Avadanlığı quran vasitəni işə "
-"salÄąn."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Şəbəkə ara üzü"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sistemnizdə bir dənə qurulmuş şəbəkə adapteri var:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerli Şəbəkə adapterinizi qurmaq üzərəyəm?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Sizi Yerli Şəbəkəyə bağlayacaq adapteri seçin"
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor qurulmayÄąb"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Qurulum Tərzi Quraşdırılması"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "İnternet qurğuları"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS verici IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s quğusunda dəyəsən bir LAN ünvan çaxışması tapıldı!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Oddan divar (Firewall) quruluşu tapıldı!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Diqqət! Var olan Firewall qurğusu tapıldı. Yükləmədən sonra bir az əl "
-"gəzdirə bilərsiniz."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Quraşdırılır..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skriptlə qurulur, proqram tə'minatı qurulur, xidmətlər başladılır..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi qurulurkən xəta oldu"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Hər şey quruldu.\n"
-"İndi isə İnternet bağlantınızı yerli şəbəkədəkı başqa kompüterlər ilə "
-"bölüşdürə bilərsiniz, bunun üçün isə avtomatik şəbəkə quraşdırılması (DHCP) "
-"işlədilir."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Quraşdırma artıq qurtarıbdır, amma fəaliyyəti dayandırılıb."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Quraşdırma artıq qurtarıbdır və fəaliyyətdədir."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "İnternet Bağlantısı Bölüşdürmə Quraşdırması aparılmayıb."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "İnternet bağlantısı bölüşdürülməsi quraşdırılması"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"İnternet Bağlantısı Bölüşdürmə vasitəsinə Xoş Gəldiniz!\n"
-"\n"
-"%s\n"
-"\n"
-"Quraşdırma sehirbazını açmaq üçün Quraşdıra tıqlayın."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Şəbəkə quraşdırılması (%d adapter)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Profili sil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Silinəcək profil:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Yeni profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ev sahibi adÄą:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Ä°nternet imkanÄą"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "NĂśv: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Keçit:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Ara Ăźz"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Hal:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "İnternet keçişini Qur..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "SĂźrĂźcĂź"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Ara Ăźz"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Hal:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Yerli Şəbəkəni Quraşdır..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Sehirbaz..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Əlavə Et"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Lütdən Gözləyin... Qurğular əlavə edilir"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Bağlandı"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Bağlı deyil"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Bağlan..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Bağlantını Kəs..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Qurulu ara ĂźzĂźnĂźz yoxdure.\n"
-"Əvvəlcə onları 'Quraşdır'a basaraq qurun"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s Adapteri: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Açılış Protokolu"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Açılışda başladılır"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP alÄącÄąsÄą"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Fəal"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Fəal"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Heç İnternet bağlantınız yoxdur.\n"
-"Əvvəlcə onları 'Quraşdır'a basaraq qurun"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "İnternet bağlantısı quraşdırılması"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "İnternet Bağlantısı Quraşdırılması"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Bağlantı növü:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametrlər"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Keçit"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Eternet KartÄą"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP AlÄącÄąsÄą"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Təhlükəsizlik səviyyəsinin quraşdırılması"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "İdarə Mərkəzi"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "FransÄązca (Kanada/Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Avropa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Ä°zlandiya dili"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Avropa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serial"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "istifadə qaydası: keyboarddrake [--expert] [klavatura]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace'in Silmə funksyasını görməyini istəyirmisiniz?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cd-Romu dəyişdir"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Qurma Cd-Romunu sürücünüzə taxın və OLDUya basın.\n"
-"Əgər Cd-Rom əlinizdə yox isə, bu Cd-Rom-dan qurmamaq üçün RƏDD ETə basın."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Təkmilləşdirmə işi başlaya bilmir !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Təkcə bu gününkünü göstər"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fayl/_Yeni"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>Y"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fayl/_Aç"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fayl/_Qeyd Et"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fayl/_Fərqli Qeyd Et"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fayl/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Seçənəklər"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Seçənəklər/Sınaq"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_YardÄąm"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/YardÄąm/_HaqqÄąnda..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "İstifadəçi adı"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ismarÄąclar"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "sistem qeydi"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "axtar"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Qeydlərinizə baxan vasitə"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Qurğular"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "oxşayır"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "amma oxşamır"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Fayl seç"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Təqvim"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Fayl məzmunu"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "xahiş edirik, gözləyin, fayl daranır: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Yerli Şəbəkə quraşdırılması"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache və Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "avadanlÄąq"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Şəkilləndirilir"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Quraşdırma"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Fərqli qeyd et..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_USB avadanlığı tapılmadı\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "3 düymə emulasiyası"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Ekran kartĹnĹzĹ seçin"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Açılış avadanlığı"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewall quraşdırılması"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewall quraşdırılması"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Firewall qurğularını artıq qurtarmısınız.\n"
-"Qur-a tıqlayaraq firewall qurğuların silin ya da təkmilləşdirin."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Qur-a tıqlayaraq standart firewall qurğularını aparın."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "İşlətdiyiniz dili seçin"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Quruluş sinifini seçin"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Sabit disk seçkisi"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Siçan qurğuları"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "KlaviaturanĹzĹ seçin"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Təhlükəsizlik"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Fayl sistemi qurğuları"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Bölmə şəkilləndirilməsi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Qurulacaq paketləri seçin"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistemi qur"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "İstifadəçi əlavə et"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Şəbəkəni qur"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Xidmətləri qur"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Sistem yükləyicini qur"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Açılış disketi yarat"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X qur"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Sistemi qur"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Qurulumdan çĹx"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall configurator\n"
-"\n"
-"Bu, Linuks Mandrake sisteminiz üçün şəxsi bir firewall quraşdıracaqdır.\n"
-"Daha güclü və e'tibarlı sistem üçün xahiş edirik xüsusi MandrakeSecurity "
-"Firewall\n"
-"buraxılışını tədqiq edin."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"İndi isə internetə bağlanırkən istifadə etməyi arzuladığınız xidmətləri\n"
-"soruşacağıq. Bu suallara xahiş edirik diqqətlə cavab verin, çünkü "
-"kompĂźterinizin \n"
-"təhlükəsizliyi çox vacib məsələdir.\n"
-"\n"
-"Xahiş edirik, bu xidmətlərdən istifadə etmədiklərinizə yaxşı qərar verin ki, "
-"firewall\n"
-"onu bağlasın. Sonradan bu qurğuları özünüz proqramı yenidən işə salaraq "
-"dəyişdirə bilərsiniz.!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Sisteminizdə bütün İnternetə göstərmək istədiyiniz veb vericisi "
-"işlədirsiniz? \n"
-"Təkcə bu kompüterin görəcəyi bir veb vericisi olacaqsa burada YOX cavasbı "
-"verə bilərsiniz.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Bu kompüterdə ad vericisi işlədirsiniz? Əgər internetə bağlanırkən bir IP "
-"ünvanı və\n"
-"nahiyə mə'lumatı almırsınızsa YOX cavabı verin.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Gələn E'tibarlı Qabıq (ssh) bağlantılarına icazə vermək istəyiriniz? Bu, "
-"bir\n"
-"cür telnet əvəzidir. İndi telnet işlədirsinizsə onda \"ssh\"yə "
-"keçməlisiniz. \n"
-"Telnet kodlama işlətmir, ona görə dəbə'zi həkerlər parolunuzu oğurlaya "
-"bilər. \n"
-"ssh bunlara icazə verməz."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Gələn telnet bağlantılarına icazə verim?\n"
-"Bu çox e'tibarsızdır. Bunu sizə əvvəlki ekranda söylədik. Buna \n"
-"yox cavabı verməyinizi tövsiyyə edirik. Yerinə ssh işlədin.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"İnternetdən yetişilə bilən bir FTP vericisi işlədirsiniz? Əgər "
-"işlədirsinizsə,\n"
-"təkcə Anonim köçürmələr üçün olmasını tövsiyyə edərik. FTP ilə göndərilən\n"
-"parollar həkerlər tərəfindən oğurlana bilər. FTP parolları kodlaya bilmir "
-"axÄą.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Burada məktub vericisi işlədirsiniz? Əgər ismarıclarınızı pine\n"
-"mutt və ya başqa mətn əsaslı məktub alıcısından göndərirsinizsə,\n"
-"demək ki, işlədirsiniz. Yoxsa firewall bunu bağlamalıdır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Burada POP və ya IMAP vericisi işlədirsiniz? Bu isə\n"
-"kompüterdə veb əsaslı olmayan məktub hesabları qurmaq üçün lazımdır.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Dəyəsən 2.2 çəkirdək işlədirsiniz. Əgər kompüterinizin\n"
-"IPsi başqa bir kompüter tərəfindən dinamik olaraq verilirsə,\n"
-"onda buna icazə vermək olar. Beledir?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Kompüterinizin vaxtı başqa bir kompüterlə sinxronlaşdırır?\n"
-"Bu, daha çox orta və geniş Unix/Linuks şirkətləri tərəfindən işlədilir.\n"
-"Əgər bir şirkətin bir parçası deyilsinizsə, demək ki, işlətmirsiniz."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Qurulum qurtarıldı. Dəyişiklikləri diskə yazım?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "%s açĹla bilmir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Yazmaq ßçßn %s açĹla bilmir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Firewall quraşdırılması"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Verici, Veb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Şəbəkə Kompüteri (alıcı)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS vericisi, SMB vericisi, SSH vericisi, Vəkil Verici"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "İş Yeri"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome iş stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot və ya Visorunuz üçün vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Masa ĂźstĂź"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Verici, Firewall/Ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeyn Ad bə Şəbəkə Mə'lumat Vericisi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"İdarə proqramları: kəlmə işləyənlər (kword, abiword), hesablayıcılar və pdf "
-"göstəriciləri, vs."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-"Səs ilə əlaqədər vasitələr: mp3 və ya midi çalğıçılar, qarışdırıçılar, vs."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linuks və pulsuz proqram tə'minatıları Kitablar və Howtoları"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE iş stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, vs."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedya - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Məktub, xəbərlər, fayl daşınması, chat vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Databeyz"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL və ya MySQL databeyz vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Kompüter qurğularını asandlaşdıran vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedya - Səs"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Vasitələr"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Sənədlər"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsol Vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix məktub vericisi, Inn xəbər vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Ä°nternet stansiyasÄą"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedya stansiyasÄą"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Başqa qrafiki ara üzlər (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "KDE, əsas qrafiki ara üz və yardımçi proqramlar kolleksiyası"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Qrafiki Ara Üz"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache və Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CD yazmaq və yandırmaq proqramları"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "İş Yeri Stansiyası"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Verici"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, IceWM, Windows Maker, Enlightement, Fvwm, vs."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Qrafika proqramları, məsələn The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C və C++ inkişaf kitabxanaları, proqramları və daxil ediləcək fayllar"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Şəbəkə Kompüteri vericisi"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Verici, ePoçt/Groupware/Xəbərlər"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Oyun stansiyasÄą"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video çalğıçıları və editorları"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedya - Qrafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Məzəli proqramlar: arkad, lövhə oyunları, strategiya, vs"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Elektronik məktub və xəbər oxuyucusu (pine, mutt, tin..) və Web səyyahları"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arxivləmə, emulyatorlar, izləmə"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Şəxsi Maliyyə"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"İstifadəçi dostu proqram və masa üstü ilə bərabər qrafiki ara üz vasitələri"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "SSH daxil bir çox protokollarĹn alĹcĹlarĹ"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "İnternet keçişı"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Səs və video çalınması/düzəliş proqramları"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Başqa qrafiki ara üzlər"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorlar, rəflər, fayl vasitələri, terminallar"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Şəxsi maliyyə idarəçiləri, məsələn gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Şəxsi Mə'lumat İdarəçisi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedya - CD YandÄąrma"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Elmi iş stansiyası"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "DayandÄąr"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "QurtardÄą"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Əsas istifadəçini seçin:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Uzaq Çap Edici"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "İndi %s moduluna parametrlər girə bilərsiniz."
-
-#~ msgid "mount failed"
-#~ msgstr "bağlama iflas etdi"
-
-#~ msgid "Low"
-#~ msgstr "Alçaq"
-
-#~ msgid "Medium"
-#~ msgstr "Orta"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Bu təhlükəsizlik səviyyəsi üçün əlavə olaraq artırılmış təhlükəsizlik "
-#~ "xəbərdarlığı və \n"
-#~ "yoxlama var."
-
-#~ msgid "Boot mode"
-#~ msgstr "Açılış modu"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Usta"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linuks zamanı GMT-yə (Greenwich Mean Time) görə qurğular və olduğunuz \n"
-#~ "yerdəki zamana görə lazımi dəyişiklikləri edər."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "İnternetə bağlantı"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "İnternetə bağlantını kəs"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Şəbəkə (İnternet/LAN) bağlantınızı quraşdırın"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Hansı diskə daşımaq istəyirsiniz?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Mə'lumat"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome iş stansiyası"
-
-#~ msgid "authentification"
-#~ msgstr "tanÄątma"
-
-#~ msgid "user"
-#~ msgstr "istifadəçi"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server. It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi "
-#~ "üçün istifadə edilir."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) verici adlarını IP ünvanlarına çevirən\n"
-#~ "Sahə Adı Vericisidir(DNS)."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Çıx"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#~ msgid "Active"
-#~ msgstr "Fəal"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Xeyr"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "\"%s\" modelində bir çap edici tapıldı:"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Yerli Çap Edici Avadanlığı"
-
-#~ msgid "Printer Device"
-#~ msgstr "Çap Edici Avadanlığı"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Uzaq CUPS vericisi"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Uzaq CUPS vericisi"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linuks"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistem modu"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Digər"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Klaviatura quruluşunu seçiniz."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "NĂśv: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Xətalı yedəkləmə faylı"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "X qur"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Çap Edici Avadanlığı"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Ləğv et"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Oldu"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Qapat"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Bağlantınız başladılır..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Bağlantınız kəsilir..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Bağlantı kəsildi. Buna əllə kökdə\n"
-#~ "/etc/sysconfig/şəbəkə-scripts/net_cnx_down\n"
-#~ "əmrini icra edərək nail ola bilərsiniz."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Sistem indi bağlantısını kəsib."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Qurmaq istədiyiniz paketləri seçin"
-
-#~ msgid "Total size: "
-#~ msgstr "HamÄąsÄą: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Xahiş edirik gözləyin, "
-
-#~ msgid "Total time "
-#~ msgstr "Ümumi müddət"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "X11 qurğuları üçün mövcud qurğulardan istifadə edək?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Çap ediciniz hansı avadanlığa bağlıdır? \n"
-#~ "(/dev/lp0, LPT1'nin qarşılığıdır)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "Diqqət, şəbəkə adapteriniz onsuz da qurulub. Yenidən quracam."
-
-#~ msgid "New"
-#~ msgstr "Yeni"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Uzaqdakı növbə adı"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Qarışıqlıq (%s), daha aydın yazın\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (əsas %s) "
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "Seçkiniz (əsas %s, yoxsa `none' yazın) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "/etc/sysconfig/autologin oxunmaq ßçßn açĹla bilmir: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Şəbəkəni yenidən başlatmaq istəyirsiniz?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "RazÄąsÄąnÄąz?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Şəbəkə avadanlığını yenidən başlatmalıyam:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "%s avadanlığını yenidən başladacam. Razısınız?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Başqa bir şəkildə seçilməmiş isə, ümumiyyətlə bu seçki \"/dev/hda\" \n"
-#~ "(Birinci ali IDE disk) ya da \"/dev/sda\" (birinci SCSI disk)\n"
-#~ "olacaqdÄąr."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Bağlantı növü:"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Əsas istifadəçini seçin:"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "SiçanĹnĹzĹ buradan sĹnayĹn."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Qurulma və sistem istifadəsi üçün bir dil seçin."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Davam edə bilmək üçün yuxarıdakı lisenziyanın maddələrini qəbul "
-#~ "etməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xahiş edirik, maddələrlə razı isəniz \"Qəbul\" düyməsinə basın.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xahiş edirik, maddələrlə razı deyilsəniz ,\"Rədd\" düyməsinə basın\n"
-#~ "Yükləmə indiki qurğularınız dəyişdirilmədən bitiriləcək."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Yuxarıdakı siyahıdan klaviaturanıza uyöun gələn düzülüşü seçiniz"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Əgər yükləmədən sonra işlətmək üçün fərqli dillər (yükləmənin əvvəlində "
-#~ "seçdiyinizdən) seçmək istəyirsinizsə,\n"
-#~ "xahiş edirik, onları yuxarıdakı siyahıdan seçin.\n"
-#~ "Əgər hamısını seçmək istəyirsiniz isə \"Hamısını\" seçin."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seç:\n"
-#~ "\n"
-#~ " - Xüsusi: Əgər Linuksa aşina isəniz bu seçənəyə tıqlayın.\n"
-#~ " Sonra sistemin sinifini seçə biləcəksiniz.\n"
-#~ " Ayrınrılar üçün aşağıya baxın.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Usta: Əgər GNU/Linuks haqqında yaxşı bilik sahibi isəniz bunu seçin.\n"
-#~ " Daha sonra \"Xüsusi\" seçkisində olduğu kimi sistemin sinifini seçə "
-#~ "biləcəksiniz.\n"
-#~ " Ancaq artıq dərəcədə xahiş edirik, NƏ ETDİYİNİZİ BİLMİRSƏNİZ BU "
-#~ "SİNİFİ SEÇMƏYİN!."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ " at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ " will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ " or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ " SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ " server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "İndi isə kompüterinizi necə işlədəcəyinizə qerar verin.Seç:\n"
-#~ "\n"
-#~ "* Masa üstü: kompüterinizi gündəlik işlər (idarə işləri, qrafika vs.)\n"
-#~ " üçün istifadə edəcək isəniz, bunu seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Təcrübi: Kompüterinizi proqram tə'minatı inkişafı üçün işlədəcəksəniz, "
-#~ "sizin ßçßn ideal seçkidir.\n"
-#~ " O zaman qaynaq kodları yazmaq, şəkilləndirmək və xətadan ayıqlamaq və ya "
-#~ "proqram paketləri hazırlamaq üçün lazımi hər cür proqramın daxil olduğu "
-#~ "bir kolleksiya kompüterinizə qurulacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Verici: Kompüterinizə Linuks-Mandrakeni verici olaraq işlətmək üçün "
-#~ "quracaqsanız, bu yaxşı bir seçkidir.\n"
-#~ " Bir fayl vericisi (NFS ya da SMB),çap edici vericisi(Unixin lp protokolu "
-#~ "ya da Windows tərzi SMB çap),\n"
-#~ " tanıdıcı verici (NIS), mə'lumat tabanı vericisi və oxşarı...Onda KDE, "
-#~ "GNOME kimi məzəli şeylərin qurulmağını gözləməyin."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "İndi qurmaq ya da güncəlləmək istədiyiniz paket qruplarını\n"
-#~ "seçə bilərsiniz.\n"
-#~ "\n"
-#~ "Sonra DrakX seçdiklərinizi qurmaq ya da güncəlləmək üçün lazımi \n"
-#~ "boş yerinizin olub olmadığını sınayacaq. Əgər yoxsa, sizə bunu \n"
-#~ "söyləyəcək. Nə olursa olsun davam etmək istəsəniz,yükləmə davam edəcək.\n"
-#~ "Amma daha az ehtiyac olan paketlər qurulmayacaq.\n"
-#~ "Siyahının üstündə \"Şəxsi paket seçilməsi\"\n"
-#~ "seçənəyini işarətləsiniz 1000dən artıqpaket arasından seçə bilərsiniz."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "İndi isə siz istədiyiniz paketi qurmaq üçün\n"
-#~ "seçə bilərsiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paket pəncərəsi solundakı bucaqdaki seçənəyə tıqlayaraqağacı həm aça\n"
-#~ "həm də sıxışdıra bilərsiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paketlərin əlifba sırasına görə düzülməsini istəyirsinizsə\n"
-#~ "\"Otaq və grupu düz\"\n"
-#~ "düyməsinə basın.\n"
-#~ "\n"
-#~ "\n"
-#~ "Paket ehtiyacları xəbərdarlıqlarını istəmirsəniz \"Avtomatik\n"
-#~ "ehtiyaclar\"ı seçə bilərsiniz.\n"
-#~ "Amma bunu işarətlədiyiniz vaxt unutmayın bir paketin işarətini "
-#~ "qaldırdığınızda\n"
-#~ "ehtiyacı olan digər paketlerin de işarəti səssizcə qalxar."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Yuxarıdakı siyahıdakı bütün CDlərə sahibsəniz, OLDUya tıqlayın.\n"
-#~ "Bu CD'lərin heç birinə sahib deyilsəniz, Ləğv et'i tıqlayın.\n"
-#~ "CD'lərdən bə'ziləri əksiksə, bunları seçili vəziyyətdən çıxarıb OLDUya "
-#~ "tÄąqlayÄąn."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Kompüterinizi internete və ya yerli networka bağlamaq\n"
-#~ "istəyirsinizsə xahiş edirik doğru xüsusiyəti seçin. Ayrıca DrakXin bunu "
-#~ "tapması üçün avadanlığınızı açın.\n"
-#~ "\n"
-#~ "\n"
-#~ "İnternet və ya yerli networka heç girişiniz yox isə\"Şəbəkə qurğularını "
-#~ "keç\"\n"
-#~ "seçənəyini işarətləyin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Şəbəkə qurğularını sonraya buraxmaq istəyirsinizsəvə ya qurğular bitdiysə "
-#~ "\"Oldu\" seçənəyini işarətləyin."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modem tapılmadı. Xahiş edirik modemin bağlı olduğu serial qapını seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xəbəriniz olsun, birinci serial qapı (Windows altında\n"
-#~ "\"COM1\") linux altında\"ttyS0\" deyə adlandırılır."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "İndi isə çevirməli bağlantı xüsusiyyətləri seçə bilərsiniz.\n"
-#~ "Əgər bilmirsinizsə və ya ne girəcəyinizə qerar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi) bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Modeminiz xarici isə modeminizi açın ki DrakX onu avtomatik olaraq tapsın."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Xahiş edirik modeminizi açın ve doğru seçənəyi işarətləyin."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Əgər yuxarıdakılar haqqında mə'lumatınız yox isə və ya ne girəcəyinizə "
-#~ "qərar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi)bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "İndi isə ev sahibi bilgilərini girin. Ne girəcəyinizə\n"
-#~ "qerar vermədinizsə\n"
-#~ "(Məsələn, İXV (ISP) və DNS nömrələri kimi)bunları\n"
-#~ "daha sonra da internete girərək öyrənə bilərsiniz."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ " * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ " You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ " ask your network administrator.\n"
-#~ "\n"
-#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ " \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Seç:\n"
-#~ "\n"
-#~ " - IP ünvanı: Əgər IP ünvanını bilmirsinizsə, sistem idarəcisinəya da \n"
-#~ "İnternet xidmət vericisinə danışın.\n"
-#~ "\n"
-#~ " - Şəbəkə maskası: Ümumiyyətlə \"255.255.255.0\" yaxşı bir seçkidir. Əgər "
-#~ "əmin \n"
-#~ "deyilsəniz, yenə sistem idarəcinizə ya da xidmət vericinizəsoruşun.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Avtomatik IP : Əgər networkunuz bootp ya da dhcp protokollarından bir "
-#~ "dənəsini \n"
-#~ "istifadə edirsə bu seçənəyi işarətləyin."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Əgər şəbəkədə NIS işlədilirsə, \"NIS kullan\" seçənəyini işarətləyin. "
-#~ "Əgər \n"
-#~ "bilmirsinizsə sistem idarəcinizə soruşun."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr "İndi ev sahibi adını girin. Bilmirsinizsə boş buraxın."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "İndi çevirməli bağlantı seçənəklərini girə bilərsiniz. Əgər nə yazılması "
-#~ "lazım olduğunu\n"
-#~ "bilmirsinizsə İnternet xidmət vericinizdən lazımi bilgiləri alın."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr "Əgə vəkil (proxy) verici istifadə edacəmsəniz bunları girin."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Əgər İnternet bağlantınız doğru şəkildə qurulmuş isə kriptoqrafik "
-#~ "paketi \n"
-#~ "də qura bilərsiniz. Əvvəl bir əks ünvanı seçin və daha sonra qurulacaq \n"
-#~ "paketləri quraşdırın."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "İndi isə yaşadığınız yerə görə zaman zolağını seçin."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Siz indi yerli və ya çevirməli yazıçını qura bilərsiniz\n"
-#~ "(Unix, Netware və ya Microsoft Windows networkundakı)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Yazdırma funksiyası istəyirsinizsə CUPS və LPR arasında seçici\n"
-#~ "davranmalÄąsÄąnÄąz.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS yeni, gĂźclĂź ve elastik bir Unix yazdÄąrma sistemidir\n"
-#~ "CUPS yəni \"Common Unix Printing System\". Bu da Linuks Mandrake\n"
-#~ "də əsas yazdırma sistemidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR Linuks Mandrakenin kĂśhne sistemidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "Printeriniz yox isə \"Yox\" düyməsinə tıqlayın."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linuks bir çox çap edici növü işlədə bilər. Hər bir növ\n"
-#~ "müxtəlif quruluş istəyər.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çap ediciniz fiziki olaraq kompüterinizə bağlı isə\n"
-#~ "\"Yerli çap edici\"nĹ seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Unix sisteminə bağlı çap ediciyə uzaqdan bağlanmaq istəyirsinizsə\n"
-#~ "\"Uzaqdan bağlanılan çap edici\".\n"
-#~ "\n"
-#~ "\n"
-#~ " MS Windows kompüterinə (və ya SMB protokolunu\n"
-#~ "işlədən Unix kompüterinə) bağlı bir çap ediciyə çatmaq üçün\n"
-#~ "\"SMB/Windows95/98/NT\" seçənəyini işarətləyin."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ " other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Location: if you want to put some information on your\n"
-#~ " printer location, put it here (you are free to write what\n"
-#~ " you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Xahiş edirik DrakXin tapa bilməsi üçün yazıçınızı açın.\n"
-#~ "\n"
-#~ "Burada bir neçə mə'lumat verməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Çap Edici adı: yazıçılar üçün \"lp\" işlədilir.\n"
-#~ "Ona görə də yazıçınızın adı \"lp\" olmalıdır.\n"
-#~ "Bir neçə çap ediciniz var isə istədiyiniz adı verə bilərsiniz. Sadəcə "
-#~ "olaraq ə aralarına boru işarəti \"|\" qoymalısınız.\n"
-#~ "Məsələn \"Mənim yazıçım|lp\".\n"
-#~ "Adında \"lp\" olan çap edici baş çap edici olacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Təsvir: İstəyə bağlıdır. Amma bir neçə çap ediciniz var isə\n"
-#~ "bir xeyli faydalı ola bilər.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Yerləşmə: Çap Edicinin yeri haqqında istədiyinizi yaza bilərsiniz."
-#~ "Məsələn, \"2ci mərtəbə\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ " \n"
-#~ " * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ " if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ " If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ " protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Burada bir neçə mə'lumat verməlisiniz.\n"
-#~ "\n"
-#~ "\n"
-#~ "*İstək adı: yazıçılar üçün \"lp\" işlədilir.\n"
-#~ "Ona görə də yazıçınızın adı \"lp\" olmalıdır.\n"
-#~ "Bir neçə çap ediciniz var isə istədiyiniz adı verə bilərsiniz. Sadəcə "
-#~ "əolaraq aralarına boru işarəti \"|\" qoymalısınız.\n"
-#~ "Məsələn \"Mənim yazıçım|lp\".\n"
-#~ "Adında \"lp\" olan çap edici baş çap edici olacaqdır.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Saxlama qovluğu: Çap Edici sifarişlərinizi saxlanıldığı yer.\n"
-#~ "Mövzudan bixəbər isəniz əsas qurğunu seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "*Çap Edici bağlantısı: Çap Edici fiziki olaraq kompüterə bağlı ise\n"
-#~ "\"Yerli Çap Edici\" seçin.\n"
-#~ "Uzaq bir Unix sistemə bağlı çap edici isə\"Uzaqdan idarəli lpd Çap Edici"
-#~ "\" seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Uzaq SMB vericisi işlədən Unix və ya Windows sisteminə bağlıyazıçı üçün "
-#~ "isə \"SMB/Windows 95/98/NT\" seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "NetWare şəbəkədə yerləşən çap edici üçün isə\"NetWare\" seçin.\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Sizin çap edici tapılmadı. Xahiş edirik bağlı olduğu avadanlığın\n"
-#~ "adÄąnÄą girin.\n"
-#~ "\n"
-#~ "\n"
-#~ "Xəbəriniz olsun, bir çox çap edici birinci paralel qapıya bağlıdır.\n"
-#~ "Bu da GNU/Linuksda \"/dev/lp0\", Windowsda isə \"LPT1\"dir."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "İndi yuxarĹdakĹ siyahĹdan çap edici seçmalisiniz."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Xahiş edirik yazıcınız üçün doğru qurğuları girin.\n"
-#~ "Nə seçəcəyinizi bilmirsiniz isə sənədlərə baxın\n"
-#~ "\n"
-#~ "\n"
-#~ "Bir sonrakı addımda yazıcınızı sınaya bilərsiniz və\n"
-#~ "daha sonra da istədiyiniz zaman dəyişdirə bilər."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Linuks sisteminiz üçün bir idarəci parolu verilməlidir. Bu parol\n"
-#~ "yazılış xətalarına meydan verməməsi və e'tibarlı olması səbəbi ilə iki "
-#~ "dəfə\n"
-#~ "girilməlidir.\n"
-#~ "\n"
-#~ "\n"
-#~ "Bu parolu diqqətli seçməlisiniz. Sadəcə idarəi parolunu bilən \n"
-#~ "adamlar sistemi idarə və dəyişiklik edə bilirlər. Ayrıca idarəci \n"
-#~ "parolu ilə sistemə girən bir adam bütün veriləri silib, sistema zərər \n"
-#~ "verə bilər. Seçdiyiniz parol alfanumerik xarakterlər daxil edib en az 8 "
-#~ "xarakter uzunluğunda olmalıdır. Hər hansı bir kağıza, dəftara qeyd\n"
-#~ "alınmamalıdır. Çox uzun bir parol və ya çox qarışıq bir parol işlədilir "
-#~ "isə \n"
-#~ "parolun xatırlanması çətinləşir.\n"
-#~ "\n"
-#~ "\n"
-#~ "İdarəci olaraq sistemə girəcayiniz zaman, giriş sırasında \"login\"\n"
-#~ "yazan qismə \"root\" və \"password\" yazan qismə idarəci parolunu\n"
-#~ "yazmalÄąsÄąnÄąz."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "İndi bir ya da daha çox adamın Linuks sisteminizi istifadə etməsinə "
-#~ "icazə\n"
-#~ "verə bilərsiniz. Hər istifadəçi hesabı üçün edilən dəyişikliklər sadəcə\n"
-#~ "o istifadəçi ve istifadəçinin \"istifadəçi sırası\" üçün hökmlü olar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Sistemi sadəcə siz istifadə edeceksəniz belə ayrı bir istifadəçi hesabı "
-#~ "açaraq\n"
-#~ "normal işler üçün bu hesabı istifadə etməlisiniz. İdarəçi \"root\" "
-#~ "hesabÄą\n"
-#~ "gündəlik işlərdə istifadə edilməməlidir. Bu bir təhlükəsizlik riski "
-#~ "təşkil edər.\n"
-#~ "Sadə bir istifadəçi hesabı ilə işləmək sizi və sistemi size qarşı\n"
-#~ "qoruyar. İdarəci hesabı olan \"root\" sadəcə, sadə bir istifadəçi hesabı\n"
-#~ "ilə etməyəcəyiniz idarə və təmir işləri üçün istifadə edilməlidir."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Başlanğıc disketi yaradılması aşırı dərəcədə tövsiyyə edilir.\n"
-#~ "Sistemi aça bilmədiyiniz zaman bu, sizin üçün tək qurtuluş yolu olar.\n"
-#~ "Yoxsa sistemi yenidən yükləmək məcburiyyətindəsiniz."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO və grub ana seçənəkləri bunlardır: \n"
-#~ "- Açılış avadanlığı: Açılış sektorunu olduğu sabit disk bölməsini daxil "
-#~ "edən avadanlığın\n"
-#~ "adını təyin edər.\n"
-#~ "Əgər heç bir şey bilmirsinizsə \"/dev/hda\"yı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Əsas əks ilə açmadan əvvəl gecikmə: Açılış sistem yükləyicisinin ilk \n"
-#~ "əksi açmadan əvvəl gözləyəcəyi zamanın, saniyənin onda biri cinsindən "
-#~ "miqdarÄądÄąr.\n"
-#~ "Bu, klaviaturanın fəallaşmasından həmən sonra sabit diskdən açılan "
-#~ "sistemlər üçün faydalıdır.\n"
-#~ "Sistem yükləyicisi, əgər \"delay\" sıfır olaraq verilmiş isə\n"
-#~ "heç gözləməz.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Ekran modu: Açılışda bir neçə mətn ekran modu seçilə bilər:\n"
-#~ " * sadə: 80x25 mətn ekran açılır.\n"
-#~ " * <rəqəm>: Göstərilənn rəqəmlərə görə mətn ekran rezolyusiyası "
-#~ "quraşdırılır.\n"
-#~ "\n"
-#~ "\n"
-#~ "- \"/tmp\"I hər açılışda təmizlə: Əgər hər açılışda \"/tmp\" cərgəsində "
-#~ "olan bĂźtĂźn\n"
-#~ "olan bütün cərgə və qovluqların silinməsini istəyirsinizsə, bu seçənəyi "
-#~ "seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ "- Var olan RAM miqdarı: Təəsüf ki, Linuks həmişə RAM miqdarını BIOSdan "
-#~ "dĂźzgĂźn\n"
-#~ "bir şəkildə öyrənəməyə bilər. Onda siz çzünüz sisteminizdə olan həqiq RAM "
-#~ "miqdarÄąnÄą buradan\n"
-#~ "girə bilərsiniz. Yadda saxlayın ki, həqiqi RAM ilə sistemin tapdığı "
-#~ "miqdar arasÄąnda 2\n"
-#~ "və ya 4 MBlıq fərq ola bilər."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO (Linuks Yükləyici) SPARC üçün bir sistem yükləyicidir: sistemi "
-#~ "Linuks\n"
-#~ "ya da kompüterinizdəki başqa bir əməliyyat sistemiylə aça bilirlər.\n"
-#~ "Əsasən bu digər əməliyyat sistemləri doğru bir şəkildə təsbit edilib "
-#~ "açılışa\n"
-#~ "qurula bilərlər. Əgər bir problem olarsa, buradan əllə əlavə edilə "
-#~ "bilərlər.\n"
-#~ "Parametrlər mövzusunda diqqətli olun."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ " - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ " - Açılış avadanlığı: Açılış sektorunu olduğu sabit disk bölməsini daxil "
-#~ "edən avadanlığın\n"
-#~ "adını təyin edər.\n"
-#~ "Əgər heç bir şey bilmirsinizsə \"/dev/hda\"yı seçin.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ana əks ilə açmadan əvvəl gecikmə: Açılış sistem yükləyicisinin ilk \n"
-#~ "görünüşü açmadan əvvəl gözləyəcəyi zamanın, saniyənin onda biri cinsindən "
-#~ "miqdarÄądÄąr.\n"
-#~ "Bu, klaviaturanın aktivləşməsindən həmən sonra sabit diskdən açılan "
-#~ "sistemlər üçün faydalıdır.\n"
-#~ "Sistem yükləyicisi, əgər delay sıfır olaraq verilmiş isə\n"
-#~ "heç gözləməz."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Buradan etibarən, Linuks GUI (Qrafik İstifadəçi Ara üzü) çəkirdəyini\n"
-#~ "əmələ gətirən X Window sistemini quracağıq. Buna görə də ekran kartınızı\n"
-#~ "və monitorunuzu qurmalısınız. Bu addımların çoxu onsuz da avtomatik "
-#~ "olaraq\n"
-#~ "keçiləcək və sizə sadəcə olaraq tövsiyə edilən qurğuları incələmək və "
-#~ "qəbul etmək\n"
-#~ "düşəcək. :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Quruluş qurtardığında əgər DrakXdən əksini istəmədiniz isə X Window \n"
-#~ "başlayacaqdır. Qurğuşarınıza baxın və yoxlayın. Qurğularınızı yoxlayaraq\n"
-#~ "uyuşmazlıq olub olmadığına baxın, lazım gəlirsə geriyə dönün."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr "X qurğularında problem olarsa aşağıdakı seçənəkləri istifadə edin."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Əgər sistemə girərkən qrafik arar üzünün gəlməsini istəyirsənız isə \"Bəli"
-#~ "\",əks halda \"Xeyr\" düyməsinə basın."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Sisteminiz üçün təhlükəsizlik səviyyəsini seçə bilərsiniz. Ətraflı "
-#~ "mə'lumat üçün xahiş edirik bələdçiyə\n"
-#~ " baş vurun. Əsasən , nə seçəcəyinizi bilmirsiniz isə buraya heç "
-#~ "toxunmayÄąn.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "İndi sistem yenidən qapanıb açılacaqdır.\n"
-#~ "\n"
-#~ "Açıldıqdan sonra Linuks Mandrake avtomatik olaraq yüklənəcəkdir. Əgər "
-#~ "başqa \n"
-#~ "bir əməliyyat sistemi də işlədəcəksəniz əlavə xəbərdarlıqları oxuyun."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Çex dili (Proqramcılar)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovakca (ProqramcÄąlar)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "YaradÄąlacaq profil adÄą:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "/etc/fstab-a Yaz"
-
-#~ msgid "Format all"
-#~ msgstr "Hamısını şəkilləndir"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Bütün bölmələri şəkilləndirdikdən sonra, "
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "bu bölmələrdəki bütün verilər itəcəkdir"
-
-#~ msgid "Reload"
-#~ msgstr "Yenidən yüklə"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Linuks köçürülməsi üçün bir dənə avtomatik qurulum disketi yaratmaq "
-#~ "istəyərmisiniz?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL quraşdırılması"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Uzaq CUPS vericiləri üçün heç bir quraşdırmaya lüzüm yoxdur \n"
-#~ "Buradakı hər çap edici avtomatik tapılacaqdır. \n"
-#~ "Əgər uzaq çap edici vericiniz var ise CUPS vercisinin \n"
-#~ "IP ünvanını verməlisiniz. Qapı nömrəsi vacib \n"
-#~ "deyil."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Uzaqdakı növbə adı"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Sahə(domain) adı"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Çap Edicisiz"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Şəbəkə Monitoru"
-
-#~ msgid "Profile "
-#~ msgstr "Profil "
-
-#~ msgid "Statistics"
-#~ msgstr "Statistikalar"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Yollama Sür'əti:"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Alam Sür'əti:"
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Bağlantı növü:"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "İnternetə bağlanılır"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "İnternet ilə bağlantını kəs"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "İnternet ilə bağlantı kəsilməsi bacarılmadı."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "İnternet ilə bağlantı kəsilməsi qurtardı."
-
-#~ msgid "Connection complete."
-#~ msgstr "Bağlantı qurtardı."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Bağlantı iflas etdi.\n"
-#~ "Qurğularınızı Mandrake İdarə Mərkəzindən yoxlayın."
-
-#~ msgid "sent: "
-#~ msgstr "yollandÄą:"
-
-#~ msgid "received: "
-#~ msgstr "alÄąndÄą:"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Əsas Runlevel"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Quraşdırma faylının içindəkilərlə oynanılmaz"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Tanınmaz quraşdırma faylı"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Bağla"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Aç"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "İndi siçanı sınaya bilərsiniz. Hər şeyin yolunda olduğunu \n"
-#~ "sınamaq üçün düymə və çarxı işlədin. Qurğular yaxşı isə\n"
-#~ "problem yoxdur. Əgər deyilsə onda \"Ləğv et\"i tıqlayaraq\n"
-#~ "başqa siçan sürücüsü seçə bilərsiniz."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (və ya ADSL) bağlantısı"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Qapat"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "CUPS ilə çap ediciyə yetişmək üçün URIni verməlisiniz"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Bəli, ASCII sınaq səhifəsi çap et"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Bəli, PostScript sınaq səhifəsi çap et"
-
-#~ msgid "Paper Size"
-#~ msgstr "Kağız Böyüklüyü"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "İş bittikdən sonra səhifə atılsın mı?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint sürücü seçənəkləri"
-
-#~ msgid "Color depth options"
-#~ msgstr "Rəng dərinlik seçənəkləri"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Mətni PostScript olaraq yazdırsın mı?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Mətn pilləli olaraq düzəldilsin mi?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Hər yekun səhifəsinin nömrəsi"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Sağ/Sol boşluqlar nöqtəvi(inch'in 1/72'si"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Üst/Alt boşluqlar nöqtəvi (inch'in 1/72'si)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Əlavə GhostScript seçənəkləri"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Əlavə mətn seçənəkləri"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Tərs səhifə sıralaması"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Çap Edici Bağlantısı Seçin"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Hər çap edicinin bir adı olmalıdır (məsələn lp).\n"
-#~ "Çap edicinin təsviri və yeri də göstərilməlidir.\n"
-#~ "Bu çap edicinin adı nədir və yeri haradadır?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Hər çap edici növbəsinin (çap edici işlərinin yollandığı yer) bir adı "
-#~ "olar \n"
-#~ "(çoxunda lp) və gözləmə qovluğuna ehtiyac duyar. Bu növbə üçün\n"
-#~ "hansı ad və qovluq istifadə edilsin?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Növbənin adı"
-
-#~ msgid "Spool directory"
-#~ msgstr "Gözləmə qovluğu"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Daha e'tibarlı bir sistem üçün \"Kölgə parol işlət\" və \"MD5 kodlama \n"
-#~ "işlət\" seçənəklərini işarətlayin."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Əgər şəbəkədə NIS istifadə edilirsə, \"NIS işlət\" seçəneyini "
-#~ "işarətləyin. Əgər \n"
-#~ "bilmirsinizsə sistem idarəcinizə soruşun."
-
-#~ msgid "yellow pages"
-#~ msgstr "sarı səhifələr"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Ä°XM dns 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Ä°XM dns 2"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "İnternetə necə bağlanmaq istəyirsiniz?"
diff --git a/perl-install/share/po/b_dump_strings.pm b/perl-install/share/po/b_dump_strings.pm
deleted file mode 100644
index f29275ecd..000000000
--- a/perl-install/share/po/b_dump_strings.pm
+++ /dev/null
@@ -1,113 +0,0 @@
-package b_dump_strings;
-
-use B qw(minus_c save_BEGINs peekop class walkoptree walkoptree_exec
- main_start main_root cstring sv_undef);
-
-BEGIN { open OUT, ">$ENV{OUTFILE}" }
-
-sub B::CV::debug {
- my ($sv) = @_;
- B::walkoptree_exec($sv->START, "debug");
-}
-
-sub B::OP::debug {
- my ($op) = @_;
-# print "OP ", class($op), " ", $op->name, "\n";
- eval {
- if ($op->name eq 'entersub') {
- $op2 = $op->first->first or return;
-
- if ($op2->name eq 'pushmark') {
- my $s = $op2->sibling->sv->PV;
- my $l;
- for ($l = $op2->sibling; ${$l->sibling}; $l = $l->sibling) {}
-
- $s =~ s/"/\\"/g;
- if ($l->first->sv->NAME eq '_') {
- print OUT qq($::pkg _("$s")\n);
- }
- }
- }
- };
-}
-sub B::RV::debug {
- my ($op) = @_;
- $op->RV->debug;
-}
-sub B::SVOP::debug {
- my ($op) = @_;
- $op->sv->debug;
-}
-sub B::PV::debug {
- my ($sv) = @_;
-# print "STRING ", $sv->PV, "\n";
-}
-sub B::IV::debug {
- my ($sv) = @_;
-# printf "IV\t%d\n", $sv->IV;
-}
-sub B::NV::debug {
- my ($sv) = @_;
-# printf "NV\t%s\n", $sv->NV;
-}
-sub B::PVIV::debug {
- my ($sv) = @_;
-# printf "IV\t%d\n", $sv->IV;
-}
-sub B::PVNV::debug {
- my ($sv) = @_;
-# printf "NV\t%s\n", $sv->NV;
-}
-sub B::AV::debug {
- my ($av) = @_;
-# print "ARRAY\n";
-}
-sub B::GV::debug {
- my ($gv) = @_;
-# printf "GV %s::%s\n", $gv->STASH->NAME, $gv->SAFENAME;
-}
-sub B::NULL::debug {
-# print "NUL\n";
-}
-sub B::SPECIAL::debug {}
-
-sub B::SV::debug { die "SV"; }
-sub B::BM::debug {
- die "BM";
-}
-sub B::PVLV::debug { die "PVLV"; }
-
-sub B::GV::pgv {
- my ($gv) = @_;
-# print $gv->NAME, "\n";
- $gv->SV->debug;
- $gv->HV->debug;
- $gv->AV->debug;
- $gv->CV->debug;
-}
-
-
-
-
-sub search {
-
-foreach my $pkg (grep { /^[a-z]/ && !/^(diagnostics|strict|attributes|main)/ } grep { /\w+::$/ } keys %main::) {
- $::pkg = $pkg;
- foreach (keys %{$main::{$pkg}}) {
- print STDERR "$pkg $_ XXXXX\n";
- local *f = *{$main::{$pkg}{$_}};
- B::svref_2object(\*f)->pgv;
- }
-}
-print STDERR "DONE\n";
-}
-
-CHECK { search() }
-INIT { exit 0 }
-
-#use lib qw(. /home/pixel/gi/perl-install);
-##use commands;
-#require '/tmp/t.pl';
-#search();
-
-1;
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
deleted file mode 100644
index 617c278c6..000000000
--- a/perl-install/share/po/be.po
+++ /dev/null
@@ -1,13566 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 MandrakeSoft.
-# Alexander Bokovoy <ab@avilink.net>, 2000
-# Maryia Davidouskaia <maryia@scientist.com>, 2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-09-24 12:30 +0100\n"
-"Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
-"Language-Team: be\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=windows-1251\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, fuzzy, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Ęŕíôiăóđŕâŕöü ěŕţ ęŕđňó"
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "÷űňŕííĺ íŕńňđîéęi"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Âiäýŕęŕđňŕ"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Ŕá˙đűöĺ âiäýŕęŕđňó"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Ŕá˙đűöĺ X ńĺđâĺđ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ńĺđâĺđ"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Ŕá˙đűöĺ X ńĺđâĺđ"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ńĺđâĺđ"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "Ńĺđâĺđ XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ßęóţ ęŕíôiăóđŕöűţ XFree âű ćŕäŕĺöĺ ŕňđűěŕöü?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ďŕäňđűěęŕ 3D-ďŕńęŕđýíí˙ ˘ Âŕřŕé âłäýŕęŕđöĺ âűęŕíŕíŕ ňîëüęł ˘ XFree %s.\n"
-"XFree %s ěîćŕ âűęŕđűńňî˘âŕöü ňîëüęł 2D-ďŕńęŕđýííĺ äë˙ ăýňŕé âłäýŕęŕđňű."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Âŕřŕ âiäýŕęŕđňŕ ěîćŕ ěĺöü 3D-ďŕńęŕđýííĺ, ˙ęîĺ ďŕäňđűěëiâŕĺööŕ ňîëüęi XFree %"
-"s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ç ďŕäňđűěęŕé 3D-ďŕńęŕđýíí˙"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Âŕřŕ âiäýŕęŕđňŕ ěîćŕ ěĺöü 3D-ďŕńęŕđýííĺ, ˙ęîĺ ďŕäňđűěëiâŕĺööŕ ňîëüęi XFree %"
-"s.\n"
-"ĚŔÉÖĹ ÍŔ ĄÂŔÇĹ, ŘŇÎ ĂÝŇŔ ÝĘŃĎĹĐŰĚĹÍŇŔËÜÍŔß ĎŔÄŇĐŰĚĘŔ I ĚÎĆŔ ĎĐŰÂĹŃÖI ÄŔ\n"
-"ÇŔÂIŃŔÍÍß ÂŔŘŔĂŔ ĘŔĚĎ'ŢŇÝĐÓ."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ç ýęńďĺđűěĺíňŕëüíŕé ďŕäňđűěęŕé 3D-ďŕńęŕđýíí˙"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Âŕřŕ âiäýŕęŕđňŕ ěîćŕ ěĺöü 3D-ďŕńęŕđýííĺ, ˙ęîĺ ďŕäňđűěëiâŕĺööŕ ňîëüęi XFree %"
-"s.\n"
-"ĚŔÉÖĹ ÍŔ ĄÂŔÇĹ, ŘŇÎ ĂÝŇŔ ÝĘŃĎĹĐŰĚĹÍŇŔËÜÍŔß ĎŔÄŇĐŰĚĘŔ I ĚÎĆŔ ĎĐŰÂĹŃÖI ÄŔ\n"
-"ÇŔÂIŃŔÍÍß ÂŔŘŔĂŔ ĘŔĚĎ'ŢŇÝĐÓ. Âŕřŕ âiäýŕęŕđňŕ ďŕäňđűěëiâŕĺööŕ XFree %s, ˙ęi\n"
-"ëĺďĺé ďŕäňđűěëiâŕĺ ęŕđňű ç 2D-ďŕńęŕđýííĺě."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Íŕńňđîéęŕ XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Ďŕçíŕ÷öĺ ďŕěĺđ âiäýŕďŕě˙öi"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Ŕá˙đűöĺ äŕäŕňęîâű˙ íŕńňđîéęi äë˙ ńĺđâĺđŕ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Ŕá˙đűöĺ ěŕíiňîđ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Ěŕíiňîđ"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Äâŕ ęđűňű÷íűő ďŕđŕěĺňđű - ăýňŕ ÷ŕńöłí˙ âĺđňűęŕëüíŕé đŕçăîđňęi, öi\n"
-"÷ŕńöłí˙ ŕäíŕ˘ëĺíí˙ ˘ń˙ăî ýęđŕíó, ŕ ňŕęńŕěŕ áîëĺé âŕćíű ďŕđŕěĺňđ -\n"
-"÷ŕńöłí˙ ăŕđűçŕíňŕëüíŕé ńiíőđŕíiçŕöűi đŕçăîđňęi, öi ÷ŕńöłí˙ âűâŕäó\n"
-"đŕäęî˘ ýęđŕíó.\n"
-"\n"
-"ÂĹËÜĚI ÂŔĆÍŔ, ęŕá ŕáđŕíű âŕěi ěŕíiňîđ ěĺ˘ ÷ŕńöłíţ ńiíőđŕíiçŕöűi, ˙ęŕ˙\n"
-"íĺ ďĺđŕâűřŕĺ ôŕęňű÷íű˙ ěŕă÷űěŕńöi âŕřŕăŕ ěŕíiňîđó: ó ďđîöiëĺăëűě âűďŕäęó\n"
-"âű ěîćŕöĺ ńŕďńŕâŕöü ěŕíiňîđ.\n"
-"Ęŕëi âű ńóěí˙âŕĺöĺń˙, ŕá˙đűöĺ ęŕíńĺđâŕňű˘íű˙ íŕńňđîéęi."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "×ŕńöłí˙ ăŕđűçŕíňŕëüíűé đŕçăîđňęi"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "×ŕńöłí˙ âĺđňűęŕëüíŕé đŕçăîđňęi"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ěŕíiňîđ ďŕęóëü íĺ íŕńňđîĺíű"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Âiäýŕęŕđňŕ ˙ř÷ý íĺ ŕäęŕíôiăóđŕâŕíŕ"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Ďŕěĺđű ýęđŕíó ˙ř÷ý íĺ ďŕçíŕ÷ŕíű"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Ďŕď˙đýäćŕííĺ: ňýńöiđŕâŕííĺ íŕ ăýňŕé âiäýŕęŕđöĺ íĺá˙ńďĺ÷íŕ"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Ďđŕâĺđęŕ ďŕđŕěĺňđࢠíŕńňđîéęi"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ďŕńďđŕáóéöĺ çě˙íiöü íĺęŕňîđű˙ ďŕđŕěĺňđű"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ďŕěűëęŕ:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Çŕńňŕëîń˙ %d ńĺęóíäŕ˘"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ăýňŕ äŕęëŕäíű˙ ďŕđŕěĺňđű íŕńňđîéęi?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ŕňđűěŕíŕ ďŕěűëęŕ, ďŕńďđŕáóéöĺ çě˙íiöü ďŕđŕěĺňđű"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Ďŕěĺđű ýęđŕíó"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Âűáŕđ ďŕěĺđࢠýęđŕíó i ăëűáiíi ęîëĺđó"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Âiäýŕęŕđňŕ: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Ńĺđâĺđ XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "Ďĺđŕíîń"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Îę"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Expert Mode"
-msgstr "Ýęńďĺđň"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Ďŕęŕçŕöü óń¸"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Ďŕěĺđű ýęđŕíó"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Ňűď ęëŕâi˙ňóđű: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Ňűď ěűřű: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Ěűř: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ěŕíiňîđ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "×ŕńöłí˙ ăŕđ.đŕçă. ěŕíiňîđó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "×ŕńöłí˙ âĺđň.đŕçă. ěŕíiňîđó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Âiäýŕęŕđňŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Âiäýŕęŕđňŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Âiäýŕďŕě˙öü: %s Ęá\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Ďŕđŕěĺňđű ăëűáiíi ęîëĺđó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Ďŕěĺđű ýęđŕíó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Ńĺđâĺđ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Ńĺđâĺđ XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ďŕäđűőňî˘ęŕ íŕńňđîéęi X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Řňî âű ćŕäŕĺöĺ çđŕáiöü?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Çě˙íiöü ěŕíiňîđ"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Çě˙íiöü âiäýŕęŕđňó"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Çě˙íiöü íŕńňđîéęi Ńĺđâĺđó"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Çě˙íiöü ďŕěĺđű ýęđŕíó"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Iíôŕđěŕöű˙"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Ďđŕâĺđűöü ˙ř÷ý đŕç"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Âűőŕä"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Öł ćŕäŕĺöĺ Âű çŕőŕâŕöü çě˙íĺííł?\n"
-"Á˙ăó÷ŕ˙ ęŕíôłăóđŕöű˙:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Çŕďóńę X ďđű ńňŕđöĺ ńińňýěű"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ěîćíŕ íŕńňđîiöü ńińňýěó äë˙ ŕ˘ňŕěŕňű÷íŕăŕ çŕďóńęó X ďŕńë˙ ńňŕđňó ńińňýěű.\n"
-"Ćŕäŕĺöĺ, ęŕá X ńňŕđňŕâࢠďđű đýńňŕđöĺ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ęŕëi ëŕńęŕ, ďĺđŕéäçiöĺ ˘ %s äë˙ ŕęňűâŕöűi çě˙íĺíí˙˘"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Ęŕëi ëŕńęŕ, âűéäçiöĺ, ŕ ďîňűě ńęŕđűńňŕéöĺ Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ęîëĺđࢠ(8 áiňŕ˘)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ňűń˙÷ű ęîëĺđࢠ(15 áiňŕ˘)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ňűń˙÷ ęîëĺđࢠ(16 áiňŕ˘)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ěiëü¸íࢠęîëĺđࢠ(24 áiňű)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ěiëi˙đäŕ ęîëĺđࢠ(24 áiňű)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 Ęá"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 Ęá"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Ěá"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Ěá"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Ěá"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Ěá"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 Ěá"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 Ěá"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 Ěá öi áîëĺé"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Ńňŕíäŕđňíű VGA, 640x480 ďđű 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ďđű 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Ńóěĺńíű ç 8514, 1024x768 ďđű 87 Hz ďđŕçđŕäęîâŕ (í˙ěŕ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ďđi 87 Hz ďđŕçđŕäęîâŕ, 800x600 ďđű 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ďđű 60 Hz, 640x480 ďđű 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Íĺďđŕçđŕäęîâŕ SVGA, 1024x768 ďđű 60 Hz, 800x600 ďđű 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Âűńîę÷ŕńöłí¸âű SVGA, 1024x768 ďđű 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Řěŕň÷ŕńöłí¸âű, ˙ęi çäîëüíű ďŕäňđűěëiâŕöü 1280x1024 ďđű 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Řěŕň÷ŕńöłí¸âű, ˙ęi çäîëüíű ďŕäňđűěëiâŕöü 1280x1024 ďđű 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Řěŕň÷ŕńöłí¸âű, ˙ęi çäîëüíű ďŕäňđűěëiâŕöü 1280x1024 ďđű 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ěŕíiňîđ, ˙ęi çäîëüíű ďŕäňđűěëiâŕöü 1600x1200 ďđű 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ěŕíiňîđ, ˙ęi çäîëüíű ďŕäňđűěëiâŕöü 1600x1200 ďđű 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Ďĺđřű ńĺęňŕđ çŕăđóçŕ÷íŕăŕ đŕçäçĺëó"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Ďĺđřű ńĺęňŕđ ďđűëŕäű (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Óńňŕë˙âŕííĺ SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Ęóäű âű ćŕäŕĺöĺ ˘ńňŕë˙âŕöü ďŕ÷ŕňęîâű çŕăđóç÷űę?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Óńňŕë˙âŕííĺ LILO/GRUB"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Ăŕëî˘íű˙ îďöűi ďŕ÷ŕňęîâŕăŕ çŕăđóç÷űęó"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-#, fuzzy
-msgid "Bootloader to use"
-msgstr "Ăŕëî˘íű˙ îďöűi ďŕ÷ŕňęîâŕăŕ çŕăđóç÷űęó"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Óńňŕë˙âŕííĺ çŕăđóç÷űęó"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Çŕăđóçŕ÷íŕ˙ ďđűëŕäŕ"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (íĺ ďđŕöóĺ ďđű ńňŕđűő âĺđńi˙ő BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Ęŕěďŕęňíŕ"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "ęŕěďŕęňíŕ"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Âiäýŕ-đýćűě"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Çŕňđűěęŕ ďĺđŕä çŕăđóçęŕé âîáđŕçó ďŕ äŕěŕ˘ëĺííţ"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Ďŕđîëü"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Ďŕ˘ňŕđűöĺ ďŕđîëü"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ŕáěĺćŕâŕííĺ îďöű˙˘ ęŕěŕíäíŕăŕ đŕäęŕ"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ŕáěĺćŕâŕííĺ"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Ŕ÷űř÷ŕöü /tmp ďđű ęîćíŕé çŕăđóçöű"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ďŕçíŕ÷öĺ äŕęëŕäíű ďŕěĺđ RAM (çíîéäçĺíŕ %d Má)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Äŕńňóďíŕ řěŕň ďđîôië˙˘"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Ďŕçíŕ÷öĺ ďŕěĺđ RAM ó Má"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Îďöű˙ ``Ŕáěĺćŕâŕííĺ îďöű˙˘ ęŕěŕíäíŕăŕ đŕäęó'' íĺ âűęŕđűńňî˘âŕĺööŕ áĺç ďŕđîë˙"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Ďŕńďđŕáóéöĺ ˙ř÷ý đŕç"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Ďŕđîëi íĺ ńóďŕäŕţöü"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-#, fuzzy
-msgid "Default OS?"
-msgstr "Ďŕ äŕěŕ˘ëĺííţ"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ó ěĺíţ ěŕţööŕ íŕńňóďíű˙ ďóíęňű.\n"
-"Âű ěîćŕöĺ äŕäŕöü ˙ř÷ý, ŕëüáî çě˙íiöü ińíóţ÷ű˙."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Äŕäŕöü"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Çđîáëĺíŕ"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Çě˙íiöü RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ßęi ňűď ďóíęňŕ ćŕäŕĺöĺ äŕäŕöü?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Iířŕ˙ ŔŃ (SunOS,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Iířŕ˙ ŔŃ (MacOS,...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Iířŕ˙ ŔŃ (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Âîáđŕç"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Äŕëó÷űöü"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "×űňŕííĺ-çŕďiń"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Ňŕáëiöŕ"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Íĺíŕäçĺéíŕ"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Ěĺňęŕ"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Ďŕ äŕěŕ˘ëĺííţ"
-
-#: ../../any.pm_.c:326
-#, fuzzy
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Âűäŕëiöü çŕďiń"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Ďóńňŕ˙ ěĺňęŕ íĺ äŕçâŕë˙ĺööŕ"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Âű ďŕâiííű ěĺöü đŕçäçĺë swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ăýňŕ˙ ěĺňęŕ ˘ćî âűęŕđűńňî˘âŕĺööŕ"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Çíîéäçĺíű %s %s iíňýđôĺéńű"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Öi ¸ńöü ó âŕń iířű?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Öi ¸ńöü ó âŕń %s iíňýđôĺéń?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Íĺ"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ňŕę"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ăë. ŕďińŕííĺ ŕáńňŕë˙âŕíí˙"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Óńňŕë˙âŕííĺ äđŕéâĺđó äë˙ %s ęŕđňű %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(ěîäóëü %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ßęi äđŕéâĺđ %s ďŕńďđŕáŕâŕöü?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Ó íĺęŕňîđűő âűďŕäęŕő %s äđŕéâĺđó ďŕňđýáíŕ íĺęŕňîđŕ˙ äŕäŕňęîâŕ˙ iíôŕđěŕöű˙,\n"
-"ŕëĺ çâű÷ŕéíŕ ăýňŕ íĺ ďŕňđŕáóĺööŕ. Öi íĺ ćŕäŕĺöĺ âű çŕäŕöü äë˙ ˙ăî\n"
-"äŕäŕňęîâű˙ îďöűi, öi äŕçâîëiöĺ äđŕéâĺđó ďđŕňýńöiđŕâŕöü ěŕřűíó\n"
-"˘ ďîřóęŕő íĺŕáőîäíŕé iíôŕđěŕöűi? Ěŕă÷űěŕ, ňýńöiđŕâŕííĺ ďđűâ˙äçĺ\n"
-"äŕ ńďűíĺíí˙ ęŕěď'ţňýđó, ŕëĺ ˙íî íi÷îăŕ íĺ ńŕďńóĺ."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Ŕ˘ňŕďîřóę"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Ďŕçíŕ÷öĺ ďŕđŕěĺňđű"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Âű íĺ ěîćŕöĺ çŕäŕöü îďöűi ěîäóëţ %s.\n"
-"Îďöűi - ó ôŕđěŕöĺ ``iě˙=çíŕ÷ýííĺ iě˙2=çíŕ÷ýííĺ2 ...''.\n"
-"Íŕďđűęëŕä, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Îďöűi ěîäóëţ:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Çŕăđóçęŕ ěîäóëţ %s íĺ ďđŕéřëŕ.\n"
-"Ćŕäŕĺöĺ ďŕńďđŕáŕâŕöü ç iířűěi ďŕđŕěĺňđŕěi?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(óćî äŕäŕäçĺíŕ %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ăýňű ďŕđîëü çŕíŕäňŕ ďđîńňű"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Ęŕëi ëŕńęŕ, óâ˙äçiöĺ iě˙ ęŕđűńňŕëüíięó"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Iě˙ ęŕđűńňŕëüíięó ďŕâiííŕ çě˙ř÷ŕöü ëiňŕđű ňîëüęi íŕ íićíiě đýăińňđű, \n"
-"ëi÷áű, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ăýňŕ iě˙ ęŕđűńňŕëüíięó ˘ćî äŕäŕäçĺíŕ"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Äŕäŕöü ęŕđűńňŕëüíięŕ"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Óâ˙äçiöĺ iě˙ ęŕđűńňŕëüíięó\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Ďđűí˙öü ęŕđűńňŕëüíięŕ"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Óëŕńíŕĺ iě˙"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Iě˙ ęŕđűńňŕëüíięó:"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Ŕáŕëîíęŕ:"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ďięňŕăđŕěŕ"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Ŕ˘ňŕěŕňű÷íű ˘âŕőîä ó ńińňýěó"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ěîćíŕ íŕńňđîiöü ńińňýěó äë˙ ŕ˘ňŕěŕňű÷íŕăŕ ˘âŕőîäó ˘ ńińňýěó äë˙\n"
-"ŕäíŕăî ęŕđűńňŕëüíięŕ. Ęŕëi Âű íĺ ćŕäŕĺöĺ ăýňŕăŕ, íŕöińíiöĺ \"Ŕäěĺíŕ\"."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Ŕá˙đűöĺ ŕńíî˘íŕăŕ ęŕđűńňŕëüíięŕ:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Ŕá˙đűöĺ ěýíýäćŕđ âîęíŕ˘:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ěîâó äë˙ ęŕđűńňŕíí˙."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Âű ěîćŕöĺ ŕáđŕöü łířű˙ ěîâű, ˙ęi˙ áóäóöü äŕńňóďíű ďŕńë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Óń¸"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Äŕäŕöü ęŕđűńňŕëüíięŕ"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Ďŕ âűáŕđó"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "×ŕęŕĺööŕ"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Âűáŕđ ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Ŕäěĺíŕ"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Ńŕđäý÷íŕ çŕďđŕřŕĺě ó Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Çóńłě ńëŕáű"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ńňŕíäŕđňíű"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Âűńîęi"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Âűńîęi"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Ďŕđŕíŕiäŕëüíű"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ăýňű óçđîâĺíü íĺŕáőîäíŕ âűęŕđűńňî˘âŕöü ç ŕńö˙đîăŕé. Ńińňýěŕ áóäçĺ ďđŕńöĺé\n"
-"ó ęŕđűńňŕííi, ŕëĺ i áîëüř ÷óňíŕé: ăýňű óçđîâĺíü á˙ńďĺęi íĺëüăŕ "
-"âűęŕđűńňî˘âŕöü\n"
-"íŕ ěŕřűíŕő, ˙ęi˙ äŕëó÷ŕíű äŕ ńĺňęi öi äŕ Internet. Óâŕőîä íĺ ŕáŕđîíĺíű "
-"ďŕđîëĺě."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ďŕđîëü çŕđŕç óęëţ÷ŕíű, ŕëĺ âűęŕđűńňŕííĺ ęŕěď'ţňýđó ˘ ˙ęŕńöi ńĺňęŕâŕăŕ\n"
-"ňŕęńŕěŕ íĺ đýęŕěĺíäŕâŕíŕ."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ăýňŕ ńňŕíäŕđňíű óçđîâĺíü á˙ńďĺęi, ˙ęi đýęŕěĺíäŕâŕíű äë˙ ęŕěď'ţňýđó,\n"
-"˙ęi äŕëó÷ŕíű äŕ Internet ó ˙ęŕńöi ęëiĺíňó. Äŕäŕíű˙ íîâű˙ ďđŕâĺđęi\n"
-"á˙ńďĺęi."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Íŕ ăýňŕě óçđî˘íĺ á˙ńďĺęi ěŕă÷űěŕ âűęŕđűńňŕííĺ ńińňýěű ˘ ˙ęŕńöi\n"
-"ńĺđâĺđó. Óçđîâĺíü á˙ńďĺęi äŕńňŕňęîâŕ âűńîęi äë˙ đŕáîňű\n"
-"ńĺđâĺđó, ˙ęi äŕďóńęŕĺ çëó÷ýííi ńŕ řěŕňëięiěi ęëiĺíňŕěi."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ďđűěŕţööŕ ˘ëŕńöiâŕńöi 4 óçđî˘í˙, ŕëĺ çŕđŕç ńińňýěŕ ďî˘íŕńöţ çŕ÷űíĺíŕ.\n"
-"Ďŕđŕěĺňđű á˙ńďĺęi ˘ńňŕíî˘ëĺíű íŕ ěŕęńiěóě."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Óçđîâĺíü á˙ńďĺęi"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Íŕńňđîéęi ˘çđî˘í˙ á˙ńďĺęi"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Ŕá˙đűöĺ äŕäŕňęîâű˙ íŕńňđîéęi äë˙ ńĺđâĺđŕ"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Íĺ őŕďŕĺ äűńęŕâŕé ďđŕńňîđű ˘ /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Ďđŕöî˘íű ńňîë"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Ńňŕđňŕâŕĺ ěĺíţ"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ęóäű âű ćŕäŕĺöĺ ˘ńňŕë˙âŕöü ďŕ÷ŕňęîâű çŕăđóç÷űę?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Íŕńňđîéęŕ ěŕäýěó"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-#, fuzzy
-msgid "/_File"
-msgstr "Ôŕéëű:\n"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr ""
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Ěŕíiňîđ"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Çě˙íiöü ěŕíiňîđ"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Đýćűě çëó÷ýíí˙"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Çŕăđóçŕ÷íŕ˙ ďđűëŕäŕ"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Íŕńňđîéęŕ X Window"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr ""
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Ěá"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d őâiëií"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 őâiëiíŕ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ńĺęóíäŕ˘"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Äŕäŕöü đŕçäçĺë íĺěŕă÷űěŕ"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Âű ěîćŕöĺ ŕáđŕöü łířű˙ ěîâű, ˙ęi˙ áóäóöü äŕńňóďíű ďŕńë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ôđŕíöű˙"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Áĺëüăiéńęi"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Í˙ěĺöęi"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Ăđý÷ŕńęi"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Íŕđâĺćńęi"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Ăë."
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Iňŕëü˙íńęi"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "ďŕńë˙äî˘íŕ˙"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Ďŕ-ďĺđřŕĺ, çđŕáiöĺ đýçĺđâîâóţ ęîďiţ âŕřűő äŕäçĺíűő"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "×űňŕéöĺ ˘âŕćëiâŕ!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ęŕëi âű ďëŕíóĺöĺ âűęŕđűńňî˘âŕöü boot âîáëŕńöü, ňŕäű đŕçě˙ńöiöĺ ˙ĺ\n"
-" íĺ äŕëĺé çŕ 2048 ńĺęňŕđî˘ ŕä ďŕ÷ŕňęó äűńęŕ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Ďŕěűëęŕ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Ěŕéńňŕđ ńňâŕđýíí˙"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Ŕá˙đűöĺ äçĺ˙ííĺ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Çŕđŕç âű ěŕĺöĺ ňîëüęi ŕäçií â˙ëięi đŕçäçĺë FAT\n"
-"(˙ęł çâű÷ŕéíŕ âűęŕđűńňî˘âŕĺ MS Dos/Windows).\n"
-"Ďđŕďŕíóţ, ďŕ-ďĺđřŕĺ, çě˙íiöü ďŕěĺđű đŕçäçĺëŕ\n"
-"(ęëięíiöĺ íŕ ˙ăî, ŕ ďîňűě íŕ \"çě˙íĺííĺ ďŕěĺđŕ˘\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Íŕöłńíłöĺ íŕ đŕçäçĺë"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Ďŕäđŕá˙çíŕńöi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ďŕěűëęŕ ěŕíöiđŕâŕíí˙"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Ďóńňŕ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "˛ířű˙"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Ňűďű ôŕéëŕâűő ńińňýěŕ˘:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Ńňâŕđűöü"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Ňűď"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Âűęŕđűńňî˘âŕéöĺ ``%s'' çŕěĺńň"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Çíiř÷űöü"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Ńďŕ÷ŕňęó çđŕáiöĺ ``Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Óńĺ äŕäçĺíű˙ ˘ đŕçäçĺëĺ %s áóäóöü ńňđŕ÷ŕíű ďŕńë˙ çěĺíű ˙ăî ňűďó"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Ŕá˙đűöĺ äçĺ˙ííĺ"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Ńňâŕđýííĺ íîâŕăŕ đŕçäçĺëó"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Đýćűě ýęńďĺđňó"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Çâű÷ŕéíű đýćűě"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Ŕäęŕň"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Ńŕďđŕ˘äű ďđŕö˙ăâŕöü?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Âűéńöi áĺç çŕőŕâŕíí˙"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Âűéńöi áĺç çŕďińó ňŕáëiöű đŕçäçĺëŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Đŕçěĺđęŕâŕöü ŕ˘ňŕěŕňű÷íŕ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Ŕ÷űńöiöü óń¸"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Iíôŕđěŕöű˙"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Óńĺ ďĺđřŕńíű˙ đŕçäçĺëű âűęŕđűńňŕíű"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Äŕäŕöü đŕçäçĺë íĺěŕă÷űěŕ"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ęŕá çđŕáiöü áîëüř đŕçäĺëŕ˘, âűäŕëiöĺ ŕäçií i ńňâŕđűöĺ ďŕřűđŕíű đŕçäçĺë "
-"(extended)"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Çŕďiń ňŕáëiöű đŕçäçĺëŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Äŕäŕňęîâŕ˙ ňŕáëiöŕ đŕçäçĺëŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Äŕäŕňęîâŕ˙ ňŕáëiöŕ đŕçäçĺëŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Äŕäŕňęîâŕ˙ ňŕáëiöŕ đŕçäçĺëŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Ŕ˘ňŕěŕíöiđŕâŕííĺ çěĺííűő íŕçŕďŕřâŕëüíłęŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Ŕá˙đűöĺ ôŕéë"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Ňŕáëiöŕ đŕçě˙ř÷ýíí˙ đýçĺđâîâŕăŕ äűńęó ěŕĺ iířű ďŕěĺđ\n"
-"Ďđŕö˙ăâŕöü äŕëĺé?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Óâŕăŕ!"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Óńňŕ˘öĺ äűńęĺňó ˘ äűńęŕâîä\n"
-"Óńĺ äŕäçĺíű˙ íŕ ăýňŕé äűńęĺöĺ áóäóöü ńňđŕ÷ŕíű"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Ďŕńďđŕáóĺě âűđŕňŕâŕöü ňŕáëiöó đŕçäçĺëŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Iíôŕđěŕöű˙"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ęđîďęŕ ěŕíöiđŕâŕíí˙"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Îďöűi"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Çě˙íĺííĺ ďŕěĺđŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Ďĺđŕíîń"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Ôŕđěŕňŕâŕííĺ"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Ěŕíöiđŕâŕííĺ"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Äŕäŕöü äŕ RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Äŕäŕöü äŕ LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Đŕçěŕíöiđŕâŕöü"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Âűäŕëiöü ç RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Âűäŕëiöü ç LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Çě˙íiöü RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Âűęŕđűńňî˘âŕöü äë˙ âiđňóŕëüíŕé ôŕéëŕâŕé ńińňýěű"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Ńňâŕđýííĺ íîâŕăŕ đŕçäçĺëó"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Ďŕ÷ŕňęîâű ńĺęňŕđ:"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Ďŕěĺđ ó Ěá:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Ňűď ôŕéëŕâŕé ńińňýěű:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ďóíęň ěŕíöiđŕâŕíí˙:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Ďŕđŕěĺňđű: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Ôŕđěŕňŕâŕííĺ âiđňóŕëüíŕăŕ đŕçäçĺëó %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Çě˙íiöü ňűď đŕçäçĺëó"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "ßęóţ ńińňýěó äđóęó Âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Ęóäű âű ćŕäŕĺöĺ ěŕíöiđŕâŕöü âiđňóŕëüíóţ ďđűëŕäó %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Ęóäű âű ćŕäŕĺöĺ ěŕíöiđŕâŕöü ďđűëŕäó %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Íĺëüăŕ ˘ńňŕë˙âŕöü ďóíęň ěŕíöiđŕâŕíí˙, ňŕěó řňî đŕçäĺë âűęŕđűńňî˘âŕĺööŕ äë˙\n"
-"âiđňóŕëüíŕé ôŕéëŕâŕé ńińňýěű.\n"
-"Ńďŕ÷ŕňęó âűäŕëiöĺ âiđňóŕëüíóţ ńińňýěó"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Ďŕäëłę ěĺćࢠôŕéëŕâŕé ńińňýěű FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Çě˙íĺííĺ ďŕěĺđŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:609
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Ďŕěĺđű ˙ęîăŕ đŕçäçĺëŕ âű ćŕäŕĺöĺ çě˙íiöü?"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Óńĺ äŕäçĺíű˙ ˘ ăýňűě đŕçäçĺëĺ ďŕâiííű áűöü çŕđőiâŕâŕíű˙"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Óńĺ äŕäçĺíű˙ ˘ đŕçäçĺëĺ %s áóäóöü ńňđŕ÷ŕíű"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Âűáŕđ íîâűő ďŕěĺđŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Ďŕěĺđ ó Ěá:"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Íŕ ˙ęi äűńę ďĺđŕíĺńöł?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Ńĺęňŕđ"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Íŕ ˙ęi ńĺęňŕđ ďĺđŕíĺńöł?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Ďĺđŕíîńłě"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Ďĺđŕíîńłööŕ đŕçäçĺë..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Ŕá˙đűöĺ ińíóţ÷ű RAID äë˙ äŕäŕíí˙"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "íîâű"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Âűá˙đűöĺ ińíóţ÷ű LVM äë˙ äŕáŕ˘ëĺíí˙"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ăýňű đŕçäçĺë íĺ ěîćŕ áűöü âűęŕđűńňŕíű ďŕä âiđňóŕëüíóţ ôŕéëŕâóţ ńińňýěó"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Âiđňóŕëüíŕ˙ ôŕéëŕâŕ˙ ńińňýěŕ (loopback)"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Iě˙ âiđňóŕëüíŕăŕ đŕçäçĺëó"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Óëŕńíŕĺ iě˙"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ôŕéë óćî âűęŕđűńňî˘âŕĺööŕ iířŕé âiđňóŕëüíŕé ńińňýěŕé. Ęŕëi ëŕńęŕ, \n"
-"ŕá˙đűöĺ iířóţ íŕçâó"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Ôŕéë óćî ińíóĺ. Âűęŕđűńňŕöü ˙ăî?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Îďöűi ěîäóëţ:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "ďđűëŕäŕ"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "óçđîâĺíü"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ďŕěĺđ áëîęó"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Áóäçüöĺ óâŕćëiâű. Ăýňóţ ŕďĺđŕöűţ íĺëüăŕ ŕäě˙íiöü"
-
-#: ../../diskdrake/interactive.pm_.c:906
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "ßęi ňűď äđóęŕđęi âű ěŕĺöĺ?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ďđŕáŕ÷öĺ, ŕëĺ íĺëüăŕ ńňâŕđűöü /boot íŕ ăýňűě äűńęó (íŕ öűëiíäđű > 1024).\n"
-"Ęŕëł âű äóěŕĺöĺ âűęŕđűńňî˘âŕöü LILO - ňŕäű ăýňŕ íĺ áóäçĺ ďđŕöŕâŕöü, LILO íĺ "
-"âűęŕđűńňî˘âŕĺöŕ, ňŕäű /boot íĺ ďŕňđýáíű."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Ŕáđŕíű äë˙ äŕäŕňęó ˘ ˙ęŕńöi ęŕđŕí¸âŕăŕ (/) đŕçäçĺë ôiçi÷íŕ çíŕőîäçiöŕ äŕëĺé\n"
-"1024-ăŕ öűëiíäđó ćîđńňęŕăŕ äűńęó, ŕ ˘ âŕń í˙ěŕ đŕçäçĺëó /boot .\n"
-"Ęŕëi áóäçĺ âűęŕđűńňî˘âŕööŕ äűńďĺ÷ŕđ çŕăđóçęi LILO, íĺ çŕďŕě˙ňŕéöĺ äŕäŕöü\n"
-"đŕçäçĺë /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Âű ŕáđŕëi RAID đŕçäçĺë ˙ę ęŕđŕí¸âű.\n"
-"Í˙ěŕ çŕăđóç÷űęó, ˙ęi á çŕăđóçi˘ń˙ áĺç /boot đŕçäçĺëŕ.\n"
-"Äŕäŕéöĺ đŕçäĺë /boot, ęŕëi ëŕńęŕ."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ňŕáëiöŕ đŕçě˙ř÷ýíí˙ ďđűëŕäű %s áóäçĺ çŕďińŕíŕ íŕ äűńę!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Ęŕá çě˙íĺííi ˘ńňóďiëi ˘ äçĺ˙ííĺ, íĺîáőîäíŕ ďĺđŕçŕăđóçiööŕ"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Óńĺ äŕäçĺíűĺ ˘ đŕçäçĺëĺ %s áóäóöü ńňđŕ÷ŕíű ďŕńë˙ ôŕđěŕňŕâŕíí˙"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Ôŕđěŕňŕâŕííĺ"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ôŕđěŕňŕâŕííĺ âiđňóŕëüíŕăŕ đŕçäçĺëó %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ôŕđěŕňŕâŕííĺ đŕçäçĺëó %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid íĺ ďđŕöŕçäîëüíű"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Íĺ őŕďŕĺ ďđŕńňîđű äë˙ ńňâŕđýíí˙ íîâűő đŕçäçĺëŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Íĺ őŕďŕĺ ďđŕńňîđű äë˙ ńňâŕđýíí˙ íîâűő đŕçäçĺëŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Ďŕěĺđű ýęđŕíó: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Ďđűëŕäŕ:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ëiňŕđŕ äë˙ DOS-äűńęó: %s (íŕ˘ăŕä)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Ňűď: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Iě˙: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Ďŕ÷ŕňŕę: ńĺęňŕđ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Ďŕěĺđ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ńĺęňŕđŕ˘"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Öűëiíäđű ç %d ďŕ %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Ôŕđěŕňŕâŕííĺ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Íĺ ŕäôŕđěŕňŕâŕíŕ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Çŕěŕíöiđŕâŕíŕ\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Ôŕéë(ű) âiđňóŕëüíŕé ôŕéëŕâŕé ńińňýěű: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Çŕăđóçŕ÷íű đŕçäçĺë ďŕ äŕěŕ˘ëĺííţ\n"
-" (äë˙ çŕăđóçęi MS-DOS, ŕ íĺ äë˙ lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Óçđîâĺíü %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ďŕěĺđ ôđŕăěĺíňó %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-äűńęi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Iě˙ ôŕéëó âiđňóŕëüíŕé ôŕéëŕâŕé ńińňýěű: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ďŕěĺđ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ăĺŕěĺňđű˙: %s öűëiíäđŕ˘, %s ăŕëîâŕę, %s ńĺęňŕđŕ˘\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Iíôŕđěŕöű˙: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-äűńęi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Ňűď ňŕáëiöű đŕçäçĺëŕ˘: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "íŕ řűíĺ %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Îďöűi: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Ňűď ôŕéëŕâŕé ńińňýěű:"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ăýňű ďŕđîëü çŕíŕäňŕ ďđîńňű (˙ăî äŕ˘ćűí˙ ďŕâiííŕ áűöü íĺ ěĺíĺé çŕ %d ëiňŕđŕ˘)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Ďŕđîëi íĺ ńóďŕäŕţöü"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Çě˙íiöü ňűď đŕçäçĺëó"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Íŕöłńíłöĺ íŕ đŕçäçĺë"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ńĺđâĺđ"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ďŕěűëęŕ ôŕđěŕňŕâŕíí˙ %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Íĺ âĺäŕţ ˙ę ŕäôŕđěŕňŕâŕöü %s ç ňűďŕě %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ďŕěűëęŕ đŕçěŕíöiđŕâŕíí˙ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr ""
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ńĺđâĺđ"
-
-#: ../../fsedit.pm_.c:467
-#, fuzzy
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Âű íĺ ěîćŕöĺ đŕçáiâŕöü íŕ đŕçäĺëű, ďŕěĺđ ˙ęiő ěĺíĺé çŕ 16 Ěá"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Âű íĺ ěîćŕöĺ đŕçáiâŕöü íŕ đŕçäĺëű, ďŕěĺđ ˙ęiő ěĺíĺé çŕ 32 Ěá"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Ďóíęň ěŕíöiđŕâŕíí˙ ďŕâiíĺí ďŕ÷űíŕööŕ ç /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Óćî ¸ńöü đŕçäçĺë ç ďóíęňŕě ěŕíöiđŕâŕíí˙ %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ăýňű ęŕňŕëîă ďŕâłíĺí çíŕőîäçłööŕ ˘íóňđű ęŕđŕí¸âŕé ôŕéëŕâŕé ńłńňýěű"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Âŕě íĺŕáőîäíŕ çŕäŕöü ďđŕâiëüíű ňűď ôŕéëŕâŕé ńińňýěű (ext2, reiserfs)\n"
-"äë˙ ăýňŕé ęđîďęi ěŕíöiđŕâŕíí˙\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Âŕě íĺŕáőîäíŕ çŕäŕöü ďđŕâiëüíű ňűď ôŕéëŕâŕé ńińňýěű (ext2, reiserfs)\n"
-"äë˙ ăýňŕé ęđîďęi ěŕíöiđŕâŕíí˙\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Íĺ őŕďŕĺ ďđŕńňîđű äë˙ ńňâŕđýíí˙ íîâűő đŕçäçĺëŕ˘"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Ďŕěűëęŕ ŕäęđűöö˙ %s äë˙ çŕďińó: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ďŕěűëęŕ: äë˙ ńňâŕđýíí˙ íîâűő ôŕéëŕâűő ńińňýěࢠíĺ çíŕéäçĺíű ŕäďŕâĺäíű˙ \n"
-"ďđűëŕäű. Ďđŕâĺđöĺ ŕáńňŕë˙âŕííĺ äë˙ ďîřóęó iěŕâĺđíŕé ďđű÷űíű."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Âű íĺ ńňâŕđűëi ŕíi˙ęiő đŕçäçĺëŕ˘!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Äŕëĺé ŕäçíŕ÷ŕíű óńĺ łńíóţ÷ű˙ đŕçäçĺëű Linux, çíîéäçĺíű˙ íŕ âŕřűě äűńęó,\n"
-" ˙ęł˙ çđîáëĺíű ěŕéńňđŕě âűëó÷ýíí˙ äűńęŕ˘. Âű ěîćŕöĺ ďŕęłíóöü łő ňŕę ł "
-"âűęŕđűńň˘âŕöü\n"
-" äŕëĺé, áî ˙íű äîáđŕ ďŕäűőîäç˙öü äë˙ çâű÷ŕéíŕăŕ âűęŕđűńňŕíí˙. Ęŕëł âű\n"
-" ˘íîńłöĺ çěĺíű, âű ďŕâłííű, âűëó÷űöü őŕö˙ đŕçäçĺë (\"/\"). Đŕáłöĺ\n"
-" đŕçäçĺë íĺ âĺëüěł ěŕëűě, áî ˘ ŕäâŕđîňíűě âűďŕäęó âű í˙ çäîëĺĺöĺ óńňŕë˙âŕöü\n"
-" äŕńňŕňęîâŕ ďđŕăđŕěíŕăŕ çŕáĺńď˙÷ýíí˙.Ęŕëł âű ćŕäŕĺöĺ çŕőŕâŕöü âŕřű˙ "
-"äŕäçĺíű˙\n"
-" íŕ ŕńîáíűě đŕçäçĺëĺ, âű ďŕâłííű ŕáđŕöü ďóíęň ěŕíöłđŕâŕíí˙ \"/home\".\n"
-"\n"
-"Ęîćíű đŕçäçĺë ďŕçíŕ÷ŕíű íŕńňóďíűě ÷űíŕě \"˛ě˙\", \"Ńâîéńňâű\".\n"
-"\n"
-"\n"
-"\"˛ě˙\" ęŕäŕâŕíŕ ňŕę - \"ňűď äűńęó\", \"íóěŕđ äűńęó\", \"íóěŕđ đŕçäçĺëó\" \n"
-"(íŕďđűęëŕä, \"hda1\").\n"
-"\n"
-"\n"
-"\"Ňűď äűńęó\" ęŕäŕâŕíű ˙ę \"hd\", ęŕëł ăýňŕ IDE, ł \"sd\" ęŕëł SCSI.\n"
-" * \"ŕ\" \"master\" íŕ ďĺđřŕńíűě ęŕíŕëĺ IDE \n"
-" * \"b\" \"slave\" íŕ ďĺđřŕńíűě ęŕíŕëĺ IDE\n"
-" * \"c\" \"master\" íŕ äđóăŕńíűě ęŕíŕëĺ IDE\n"
-" * \"d\" \"slave\" íŕ äđóăŕńíűě ęŕíŕëĺ IDE\n"
-"\n"
-"\n"
-"Äë˙ SCSI äűńęࢠ- \"a\" ăýňŕ \"ďĺđřŕńíű ćîđńęł äűńę\", \"b\" - \"äđóăŕńíű "
-"ćîđńęł äűńę\", ł ă.ä."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Ó ăýňűě ďóíęöĺ, âű ďŕâłííű ŕáđŕöü äçĺ íŕ âŕřűě ćîđńęłě \n"
-"äűńęó óńňŕë˙âŕöü ŕďĺđŕöűéíóţ ńłńňýěó Mandrake Linux. Ęŕëł äűńę ďóńňű\n"
-"ŕëüáî ˘ńňŕëűâŕíŕ˙ ŕďĺđŕöűéíŕ˙ ŕďĺđŕöűéíŕ˙ ńłńňýěŕ âűęŕđűńňî˘âŕĺ ˘ńţ\n"
-"äűńęŕâóţ ďđŕńňîđó, âű ďŕâłííű đŕçüáłöü ˙ăî íŕ đŕçäçĺëű. Ó ŕńíî˘íűě,\n"
-"đŕçáłöö¸ đŕçäçĺëࢠćîđńęŕăŕ äűńęó ńęëŕäŕĺööŕ ç ëŕăł÷íŕăŕ äç˙ëĺíí˙ ˙ăî\n"
-"äűńęŕâŕé ďđŕńňîđű äçĺë˙ ˘ńňŕë˙âŕíí˙ âŕřŕé íîâŕé ńłńňýěű Mandrake Linux.\n"
-"\n"
-"Ňŕěó ˙ę âűíłęł đŕçáłöö˙ đŕçäçĺëࢠçâű÷ŕéíŕ íĺçâŕđîňíű˙, ăýňű ďđŕöýń \n"
-"ěîćŕ áűöü ďóćŕţ÷űě ł íŕďđóćŕíűě, ęŕëł âű íĺâîďűňíű ęŕđűńňŕëüíłę. Ăýňű\n"
-"ěŕéńňŕđ ńďđŕř÷ŕĺ ăýňű ďđŕöýń. Ďĺđŕä ňűě ˙ę ďŕ÷ŕöü çâ˙đíłöĺń˙, ęŕëł\n"
-"ëŕńęŕ, äŕ äŕâĺäęł.\n"
-"\n"
-"Âŕě ďŕňđýáíŕ, ńŕěŕ ěŕëŕ, äâŕ đŕçäçĺëű. Ďĺđřű íĺďŕńđýäíŕ äë˙ ŕďĺđŕöűéíŕé\n"
-"ńłńňýěű, ł äđóăł äë˙ âłđňóŕëüíŕé ďŕě˙öł (Swap - đŕçäçĺë).\n"
-"\n"
-"Ęŕëł đŕçäçĺëű ˘ćî âűçíŕ÷ŕíű (ó ďŕď˙đýäí˙ĺ ˘ńňŕë˙âŕííĺ öł łířűě \n"
-"łíńňđóěŕíňŕě âűçíŕ÷ýíí˙ đŕçäçĺëŕ˘), âű ďŕâłííű ŕáđŕöü ňű˙, ˙ęł˙ ćŕäŕĺöĺ\n"
-"âűęŕđűńňî˘âŕöü äë˙ ˘ńňŕë˙âŕíí˙ ńłńňýěű.\n"
-"\n"
-"\n"
-"Ęŕëł đŕçäçĺëű íĺ áűëł âűçíŕ÷ŕíű, âű ďŕâłííű łő ńňâŕđűöü. Ęŕá çđŕáłöü \n"
-"ăýňŕ, ńęŕđűńňŕéöĺ ěŕéńňđŕ, äŕńňóďíŕăŕ âűřýé. Ó çŕëĺćíŕńöł ŕä \n"
-"ęŕíôłăóđŕöűł ćîđńňęŕăŕ äűńęó, ěîăćŕ áűöü çđîáëĺíŕ íŕńňóďíŕĺ:\n"
-"\n"
-"* Âűęŕđűńňŕííĺ łńíóţ÷ŕăŕ đŕçäçĺëó: ěŕéńňŕđ çíŕéřî˘ ŕäçłí öł íĺęŕëüęł.\n"
-"łńíóţ÷űő đŕçäçĺëࢠíŕ âŕřűě ćîđńęłě äűńęó. Ęŕëł âű ćŕäŕĺöĺ łő çŕőŕâŕöü,\n"
-"ŕá˙đűöĺ ăĺňóţ îďöűţ.\n"
-"\n"
-"\n"
-"* Ďî˘íŕ˙ ŕ÷űńňęŕ äűńęó: ŕá˙đűöĺ ăýňŕ, ęŕëł âű ćŕäŕĺöĺ âűäŕëłöü óńĺäŕäçĺíű˙ ł "
-"đŕçäçĺëű ˙ęł˙ łńíóţöü\n"
-" íŕ âŕřűě äűńęó ł çŕě˙íłöü íŕ Mandrake Linux. Áóäçöĺ óâŕćëłâű ç ăýňŕéîďöű˙é, "
-"áî ăýňű ďđŕöýń íĺçâŕđîňíű.\n"
-"\n"
-"\n"
-"* Âűęŕđűńňŕííĺ âîëüíŕé ďđŕńňîđű íŕ đŕçäçĺëĺ Windows: ęŕëł MicrosoftWindows "
-"óńňŕë˙âŕíŕ íŕ âŕřűě ćîđńęłě\n"
-" äűńęó ł âűęŕđűńňî˘âŕĺ ˘ńţ äŕńňóďíóţ ďđŕńňîđó, âű ďŕâłííű ńňâŕđűöüâîëüíóţ "
-"ďđŕńňîđó äë˙ äŕäçĺíűő Linux\n"
-"Ęŕá çđŕáłöü ăýňŕ, âű ěîćŕöĺ âűäŕë˙öü âŕř đŕçäçĺë Windows ł äŕäçĺíű˙(ăë."
-"\"Ŕ÷űńňęŕ óń˙ăî äűńęó\" ŕëüáî\n"
-" \"Đýćűě ýęńďĺđňó\") ŕëüáî çě˙íłöü ďŕěĺđű âŕřŕăŕ đŕçäçĺëó WindowsÇě˙íĺííĺ "
-"ďŕěĺđࢠěîćŕ áűöü âűęŕíŕíŕ\n"
-" áĺç ńňđŕňű äŕäçĺíűő. Ăýňŕ˙ îďöű˙ đýęŕěĺíäóĺööŕ, ęŕëł âű "
-"ćŕäŕĺöĺâűęŕđűńňî˘âŕöü Mandrake Linux ł\n"
-" Microsoft Windows íŕ ŕäíűě ł ňűě ćŕ ęŕěď'ţňýđű.\n"
-"\n"
-" Ďĺđŕä âűáŕđŕě ăýňŕăŕ, ęŕëł ëŕńęŕ, çüâ˙đíłöĺ ˘âŕăó, íŕ ňîĺ, řňîęîëüęŕńüöü "
-"äŕńňóďíŕé âîëüíŕé\n"
-" ďđŕńňîđű ďŕä Microsoft Windows çěĺířűööŕ.\n"
-"\n"
-"\n"
-"* Đýćűě ýęńďĺđňó: âű ěîćŕöĺ ŕáđŕöü ăýňóţ îďöűţ, ęŕëł âű ćŕäŕĺöĺđŕçáłöü "
-"đŕçäçĺëű óëŕńíŕ đóęŕěł.\n"
-" Áóäçöĺ ˘âŕćëłâű˙ ŕáłđŕţ÷ű ăýňŕ. Ăýňŕ˙ îďöű˙ ěŕăóňíŕ˙ ŕëĺ äŕâîëłíĺá˙ńďĺ÷íŕ˙, "
-"âű ěîćŕöĺ\n"
-" ë¸ăęŕ çăóáłöü ńâŕĺ äŕäçĺíű˙. Ňŕěó íĺ ŕáłđŕéöĺ ăýňóţ îďöűţ ęŕëł âűíĺ âĺäŕĺöĺ "
-"řňî đîáłöĺ."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Óńĺ đŕçäçĺëű, ˙ęł˙ áűëł ňîëüęł âűçíŕ÷ŕíű ďŕâłííű áűöü\n"
-"ŕäôŕđěŕňŕâŕíű (ôŕđěŕňŕâŕöü - çíŕ÷űöü ńňâŕđűöü ôŕéëŕâŕţ ńłńňýěó).\n"
-"\n"
-"\n"
-"Ó ňîé ćŕ ÷ŕń, âű ěîćŕöĺ ďĺđŕôŕđěŕňŕâŕöü óćî łńíóţ÷ű˙ đŕçäçĺëű, ęŕá ńö¸đöł\n"
-"äŕäçĺíű˙ ˙ęł˙ ˙íű ˘ňđűěëłâŕţöü. Ęŕëł âű ćŕäŕĺöĺ çđŕáłöü ăýňŕ, ŕá˙đűöĺ "
-"đŕçäçĺëű\n"
-"˙ęł˙ ćŕäŕĺöĺ ŕäôŕđěŕňŕâŕöü.\n"
-"\n"
-"\n"
-"Çŕ˘âŕćöĺ, âű ďŕâłííű ďĺđŕôŕđěŕňŕâŕöü óńĺ ńňâîđŕíű˙ đŕçäçĺëű. Âű ďŕâłííű\n"
-"ďĺđŕôŕđěŕňŕâŕöü đŕçäçĺëű, ˙ęł˙ ˘ňđűěëłâŕţöü ŕďĺđŕöűéíóţ ńłńňýěó (ňűďó \"/"
-"\",\n"
-"\"/usr\" öł \"/var\"), ŕëĺ íĺ ďŕâłííű ďĺđŕôŕđěŕňŕâŕöü đŕçäçĺëű, ˙ęł˙ "
-"óňđűěëłâŕţöü\n"
-"äŕäçĺíű˙, ˙ęł˙ âű ćŕäŕĺöĺ çŕőŕâŕöü (çâű÷ŕéíŕ /home).\n"
-"\n"
-"\n"
-"Ęŕëł ëŕńęŕ, áóäçöĺ ˘âŕćëłâű˙, ŕáłđŕţ÷ű đŕçäçĺëű, áî ďŕńë˙ ôŕđěŕňŕâŕíí˙\n"
-"óńĺ äŕäçĺíű˙ áóäóöü íĺçâŕđîňíŕ âűäŕëĺíű˙.\n"
-"\n"
-"\n"
-"Íŕöłńíłöĺ \"Ňŕę\" ęŕëł âű ăŕňîâű˙ ôŕđěŕňŕâŕöü đŕçäçĺë˙.\n"
-"\n"
-"\n"
-"Íŕöłńíłöĺ \"Ŕäěĺíŕ\" ęŕëł ćŕäŕĺöĺ ŕáđŕöü łířű˙ đŕçäçĺëű äë˙ "
-"óńňŕë˙âŕíí˙âŕřŕé\n"
-"íîâŕé ŕďĺđŕöűéíŕé ńłńňýěű Mandrake Linux."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Âŕřŕ íîâŕ˙ ŕďĺđŕöűéíŕ˙ ńłńňýěŕ Mandrake Linux çŕđŕç óńňŕ븢âŕĺööŕ.\n"
-"Ăýňŕ ŕďĺđŕöű˙ ŕäűěĺ ďý˘íű ÷ŕń(řňî çŕëĺćűöü ŕä ďŕěĺđó ŕáđŕíŕăŕ ˘ńňŕë˙âŕíí˙ ł "
-"őóňęŕńöł\n"
-" ęŕěď'ţňýđó) .\n"
-"\n"
-"\n"
-"Ęŕëł ëŕńęŕ, ďŕ÷ŕęŕéöĺ."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Íŕ âŕřűě äűńęó áűëî çíîéäçĺíŕ áîëĺé çŕ ŕäçłí đŕçäçĺë\n"
-"Windows. Ęŕëł ëŕńęŕ, ŕá˙đűöĺ ňîé, ďŕěĺđ ˙ęîăŕ ćŕäŕĺöĺ çě˙íłöü, "
-"ęŕáóńňŕë˙âŕöü\n"
-"ńłńňýěó Mandrake Linux.\n"
-"\n"
-"\n"
-"Äë˙ iôŕđěŕöűł, ęîćíű đŕçäçĺë ŕäçíŕ÷ŕíű ˙ę: \"Linux łě˙\", \"Windows\n"
-"łě˙\" \"Câîéńňâű\".\n"
-"\"Linux ˛ě˙\" ęŕäŕâŕíŕ ňŕę - \"ňűď äűńęó\", \"íóěŕđ äűńęó\",\"íóěŕđ "
-"đŕçäçĺëó\n"
-"(íŕďđűęëŕä, \"hda1\").\n"
-"\n"
-"\n"
-"\"Ňűď äűńęó\" ęŕäŕâŕíű ˙ę \"hd\", ęŕëł ăýňŕ IDE, ł \"sd\" ęŕëł SCSI.\n"
-"\n"
-"\"Íóěŕđ äűńęó\" - ńłěâŕë ďŕńë˙ \"hd\" öł \"sd\". Äë˙ IDE äűńęŕ˘:\n"
-" * \"ŕ\" \"master\" íŕ ďĺđřŕńíűě ęŕíŕëĺ IDE \n"
-" * \"b\" \"slave\" íŕ ďĺđřŕńíűě ęŕíŕëĺ IDE\n"
-" * \"c\" \"master\" íŕ äđóăŕńíűě ęŕíŕëĺ IDE\n"
-" * \"d\" \"slave\" íŕ äđóăŕńíűě ęŕíŕëĺ IDE\n"
-"\n"
-"\n"
-"Äë˙ SCSI äűńęࢠ- \"a\" ăýňŕ \"ďĺđřŕńíű ćîđńęł äűńę\", \"b\" - \"äđóăŕńíű "
-"ćîđńęł äűńę\", ł ă.ä.\n"
-"\n"
-"\"Windows ˛ě˙\" ńłěâŕë âŕřŕăŕ äűńęó ˘ Windows (ďĺđřű äűńę öł\n"
-"đŕçäçĺë ďŕçíŕ÷ŕĺööŕ ˙ę \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Ęŕëł ëŕńęŕ, ďŕ÷ŕęŕéöĺ. Ăýňŕ˙ ŕďĺđŕöű˙ ŕäűěĺ ďý˘íű ÷ŕń."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Ęŕëł ëŕńęŕ, íŕöłńíłöĺ \"Óńňŕ븢ęŕ\" ęŕëł íĺ ěŕĺööŕ ŕíł˙ęŕé ďŕď˙đýäí˙éâĺđńłł "
-"Mandrake Linux\n"
-"ŕëüáî âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü íĺęŕëüęł ŕďĺđŕöűéíűő ńłńňýěŕ˘.\n"
-"\n"
-"\n"
-"Ó çŕëĺćíŕńöł ŕä âŕřűő âĺäࢠGNU/Linux, âű ěîćűöĺ ŕáđŕöü ŕäçłí ç íŕńňóďíűő "
-"ęëŕńŕ˘, ęŕá óńňŕ븢âŕöü ł ěŕäűôłęŕâŕöü \n"
-"âŕřóţ ŕďĺđŕöűéíóţ ńłńňýěó Mandrake Linux:\n"
-"\n"
-"* Đýęŕěĺíäŕâŕíŕ: ŕá˙đűöĺ ăýňű ęëŕń, ęŕëł âű íłęîëł íĺ ˘ńňŕ븢âŕëłGNU/Linux. "
-"Óńňŕë˙âŕííĺ áóäçĺ âĺëüěł ďđîńňűě,\n"
-" âŕě áóäçĺ çŕäŕíŕ ňîëüęł íĺęŕëüęł ďűňŕíí˙˘.\n"
-"\n"
-"\n"
-"* Ďŕ âűáŕđó: ęŕëł âű äŕńňŕňęîâŕ çíŕ¸ěű˙ ç GNU/Linux, âű ěîćŕöĺ çđŕáłöü âűáŕđ "
-"ěłć âűęŕđűńňŕííĺě ńłńňýěű ˙ę Ďđŕöî˘íŕ˙\n"
-" ńňŕíöű˙, Ńĺđâĺđ, Đŕńďđŕöî˘ęŕ. Âű ďŕâłííű áóäçĺöĺ ŕäęŕçŕöü íŕ áîëüřóţ "
-"ęîëüęŕńöü ďűňŕíí˙˘ ÷űě ďŕä ÷ŕń óńňŕë˙âŕíí˙\n"
-" ęëŕńó \"Đýęŕěýíäŕâŕíŕ\", ňŕěó âű ďŕâłííű âĺäŕöü, ˙ę ďđŕöóĺ GNU/Linux, ęŕá "
-"ŕáđŕöü ăýňű ęëŕń óńňŕë˙âŕíí˙.\n"
-"\n"
-"\n"
-"* Ýęńďĺđň: âű ěîćŕöĺ ŕáđŕöü ăýňű ęëŕń, ęŕëł âű ěŕĺöĺ äîáđű˙ âĺäű ˘ GNU/"
-"Linux. ßę ł ďđű ˘ńňŕë˙âŕííł ęëŕńó\n"
-" \"Íŕńňđîĺíŕ\", âű ěîćŕöĺ çđŕáłöü âűáŕđ ěłć âűęŕđűńňŕííĺě ńłńňýěű ˙ę "
-"Ďđŕöî˘íŕ˙ ńňŕíöű˙, Ńĺđâĺđ,\n"
-" Đŕńďđŕöî˘ęŕ. Áóäçüöĺ âĺëüěł ŕńö˙đîćíű˙ ďĺđŕä ňűě, ˙ę ŕáđŕöü ăýňű ęëŕń "
-"óńňŕë˙âŕíí˙. Âű áóäçĺöĺ çäîëüíű˙ âűęŕíŕöü óńňŕë˙âŕííĺ ˘\n"
-" ŕäďŕâĺäíŕńöł ç âŕřűěł ćŕäŕíí˙ěł. Ŕäęŕçű íŕ íĺęŕňîđű˙ ďűňŕííł ěîăóöü áűöü "
-"âĺëüěł ńęëŕäŕíűěł, ęŕëł âű íĺ ěŕĺöĺ äîáđűő âĺäࢠó GNU/Linux.\n"
-" Ňŕěó íĺ ŕáłđŕéöĺ ăýňű ęëŕń łíńňŕë˙öűł, ęŕëł âű íĺ âĺäŕĺöĺ ňîĺ, řňî đîáłöĺ."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (ŕä LInux LOader) i Grub - ăýňŕ çŕăđóç÷űęi. ßíű ěîăóöü çŕăđóçiöü "
-"äđóăóţ\n"
-"GNU/Linux öi ëţáóţ iířóţ ŕďĺđŕöűéíóţ ńińňýěó, óńňŕë˙âŕíóţ íŕ ęŕěďóňŕđű.\n"
-"Çâű÷ŕéíŕ, ăýňű˙ iířű˙ ŕďĺđŕöűéíű˙ ńińňýěű ęŕđýęňíŕ âűçíŕ÷ŕţööŕ i\n"
-"˘ńňŕ븢âŕţööŕ. Ęŕëi ăýňŕ íĺ ŕňđűěŕëŕń˙, ňî âű ěîćŕöĺ äŕäŕöü ëţáű çŕďiń\n"
-"ńŕěŕńňîéíŕ. Áóäçüöĺ ˘ďý˘íĺíű, řňî âű çŕäŕëi ęŕđýęňíű˙ ďŕđŕěĺňđű.\n"
-"\n"
-"\n"
-"Ňŕęńŕěŕ âű ěîćŕöĺ ďŕćŕäŕöü i íĺ äŕáŕ˘ë˙öü iířű˙ ŕďĺđŕöűéíű˙ ńińňýěű.\n"
-"Ó ňŕęiě âűďŕäęó ďŕňđýáíŕ âűäŕëiöü ŕäďŕâĺäíű˙ çŕďińű. Ŕëĺ ć ňŕäű âŕě \n"
-"ďŕňđýáíŕ áóäçĺ çŕăđóçŕ÷íŕ˙ äűńęĺňŕ, ęŕá çŕăđóçiööŕ!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Íĺŕáőîäíŕ ďŕçíŕ÷űöü, äçĺ âű ćŕäŕĺöĺ đŕçě˙ńöiöü iíôŕđěŕöűţ, ˙ęŕ˙ íĺŕáőîäíŕ\n"
-"äë˙ çŕăđóçęi Linux.\n"
-"\n"
-"\n"
-"Ęŕëi âű íĺ ŕä÷óâŕĺöĺ ŕáńŕëţňíŕ äŕęëŕäíŕ, řňî âű đîáiöĺ, \n"
-"ŕá˙đűöĺ \"Ďĺđřű ńĺęňŕđ íŕ äűńęó (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Ŕá˙đűöĺ ćîđńęł äűńę ˙ęł ćŕäŕĺöĺ ŕ÷űńöłöü äë˙ ˘ńňŕë˙âŕíí˙\n"
-"íîâŕăŕ đŕçäçĺëó Mandrake Linux. Áóäçöĺ ˘âŕćëłâű˙, óńĺ äŕäçĺíű˙ íŕ äűńęó "
-"áóäóöü\n"
-" çíłř÷ŕíű ł łő íĺěŕă÷űěŕ áóäçĺ ŕäíŕâłöü."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Íŕöłńíłöĺ \"Ňŕę\", ęŕëł ćŕäŕĺöĺ âűäŕëłöü óńĺ äŕäçĺíű˙\n"
-"ł đŕçäçĺëű íŕ ăýňűě äűńęó. Áóäçöĺ óâŕćëłâű˙, ďŕńë˙ ăýňŕé ŕďĺđŕöűł âű íĺ\n"
-"\n"
-"çäîëĺĺöĺ ŕäíŕâłöü ëţáű˙ äŕäçĺíű˙ ł đŕçäçĺëű, óëł÷âŕţ÷ű ł äŕäçĺíű˙ Windows\n"
-"\n"
-"\n"
-"Íŕöłńíłöĺ \"Ŕäěĺíŕ\" ęŕá ŕäě˙íłöü ŕďĺđŕöűţ áĺç ńňđŕňű äŕäçĺíűő ł đŕçäçĺëŕ˘"
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Íĺěŕă÷űěŕ âűęŕđűńňî˘âŕöü broadcast áĺç äŕěĺíŕ NIS"
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Óńňŕ˘öĺ äűńęĺňó ˘ äűńęŕâîä %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Ďŕěűëęŕ ÷űňŕíí˙ ôŕéëó %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Ďý˘íŕĺ ŕáńňŕë˙âŕííĺ ďŕňđŕáóĺ ęŕěĺđöűéíűő äđŕéâĺđࢠäë˙ ďđŕöű.\n"
-"×ŕńňęîâŕ łíôŕđěŕöűţ ďđŕ łő ěîćíŕ ŕňđűěŕöü ňóň: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Âű ďŕâiííű ěĺöü ęŕđŕí¸âű đŕçäçĺë.\n"
-"Äë˙ ăýňŕăŕ ńňâŕđűöĺ đŕçäçĺë (ŕëüáî ŕäçíŕ÷öĺ ˘ćî ińíóţ÷ű).\n"
-"Ďîňűě ŕá˙đűöĺ ``Ęđîďęŕ ěŕíöiđŕâŕíí˙'' i ˘ńňŕíŕâiöĺ ˙ĺ ˘ `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Âű ďŕâiííű ěĺöü đŕçäçĺë swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Í˙ěŕ đŕçäçĺëŕ swap.\n"
-"\n"
-"Óń¸ ŕäíî ďđŕö˙ăâŕöü?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Âű ďŕâiííű ěĺöü đŕçäçĺë swap"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Âűęŕđűńňî˘âŕöü íĺçŕí˙ňóţ ďđŕńňîđó"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Íĺ őŕďŕĺ ďđŕńňîđű äë˙ ńňâŕđýíí˙ íîâűő đŕçäçĺëŕ˘"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Âűęŕđűńňî˘âŕöü ińíóţ÷ű đŕçäçĺë"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Í˙ěŕ ińíóţ÷űő đŕçäçĺëŕ˘, ˙ęi˙ ěîćíŕ âűęŕđűńňŕöü"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Âűęŕđűńňî˘âŕöü đŕçäçĺë Windows äë˙ âiđňóŕëüíŕé ôŕéëŕâŕé ńińňýěű"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ďŕěĺđű ˙ęîăŕ đŕçäçĺëŕ âű ćŕäŕĺöĺ çě˙íiöü?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Âűáŕđ ďŕěĺđŕ˘"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Ęŕđŕí¸âű đŕçäçĺë ˘ Má: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ďŕěĺđ swap đŕçäçĺëó ˘ Má:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Âűęŕđűńňî˘âŕöü íĺçŕí˙ňóţ ďđŕńňîđó íŕ đŕçäçĺëĺ Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Ďŕěĺđű ˙ęîăŕ đŕçäçĺëŕ âű ćŕäŕĺöĺ çě˙íiöü?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Âűëi÷ýííĺ ěĺćࢠôŕéëŕâŕé ńińňýěű Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Ó ďđŕăđŕěű çěĺíű ďŕěĺđࢠđŕçäçĺëŕ FAT íĺ ŕňđűěŕëŕń˙\n"
-"ŕďđŕöŕâŕöü Âŕř đŕçäçĺë, ďŕěűëęŕ: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Âŕř đŕçäçĺë ç Windows çŕíŕäňŕ ôđŕăěĺíňŕâŕíű. \n"
-"Đýęŕěĺíäóĺě ńďŕ÷ŕňęó çŕďóńöiöü ďđŕăđŕěó ``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÓÂŔĂŔ!\n"
-"\n"
-"DrakX çŕđŕç ďŕâiíĺí çě˙íiöü ďŕěĺđ âŕřŕăŕ đŕçäçĺëŕ Windows.\n"
-"Áóäçüöĺ ˘âŕćëiâű: ăýňŕ˙ ŕďĺđŕöű˙ íĺá˙ńďĺ÷íŕ. Ęŕëi âű ˙ř÷ý íĺ çđŕáiëi \n"
-"đýçĺđâîâóţ ęîďiţ äŕäçĺíűő, ňî ńďŕ÷ŕňęó ďŕęiíüöĺ ďđŕăđŕěó ˘ńňŕë˙âŕíí˙,"
-"âűęŕíŕéöĺ scandisk i defrag íŕ ăýňűě đŕçäĺëĺ, çđŕáiöĺ đýçĺđâîâóţ ęîďiţ\n"
-"äŕäçĺíűő i ňîëüęi ďîňűě çíî˘ â˙đíiöĺń˙ äŕ ďđŕăđŕěű ˘ńňŕë˙âŕíí˙.\n"
-"Ęŕëi ďŕäđűőňŕâŕëiń˙, íŕöińíiöĺ Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "ßęóţ ďđŕńňîđó çŕőŕâŕöü äë˙ Windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Đŕçäçĺë %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ŕ˘ňŕçě˙íĺííĺ ďŕěĺđࢠíĺ ŕňđűěŕëŕń˙ äë˙ đŕçäçĺëó FAT %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Íĺ çíîéäçĺíŕ đŕçäçĺëࢠFAT äë˙ çě˙íĺíí˙ ďŕěĺđࢠŕëüáî âűęŕđűńňŕíí˙\n"
-"˘ ˙ęŕńöi âiđňóŕëüíŕé ôŕéëŕâŕé ńińňýěű (öi íĺäŕńňŕňęîâŕ ďđŕńňîđű íŕ äűńęó)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Ńö¸đöi äŕäçĺíű˙ íŕ ˘ńiě äűńęó"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Âűäŕëiöü Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Íŕ ˙ęi ç ěŕţ÷űőń˙ ćîđńňęiő äűńęࢠÂű ćŕäŕĺöĺ ˘ńňŕë˙âŕöü Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Óńĺ ińíóţ÷ű˙ đŕçäçĺëű íŕ äűńęó %s i äŕäçĺíű˙ íŕ iő áóäóöü ńňđŕ÷ŕíű"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Âűęŕđűńňî˘âŕöü ińíóţ÷ű đŕçäçĺë"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Âűęŕđűńňî˘âŕöü fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Âű ěîćŕöĺ ö˙ďĺđ đŕçáiöü âŕř äűńę %s\n"
-"Ďŕ çŕęŕí÷ýííi íĺ çŕáóäçüöĺń˙ çŕőŕâŕöü çě˙íĺííi, ńęŕđűńňŕ˘řű `w'"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Âűęŕđűńňî˘âŕöü íĺçŕí˙ňóţ ďđŕńňîđó íŕ đŕçäçĺëĺ Windows"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Äŕäŕöü đŕçäçĺë íĺěŕă÷űěŕ"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ěŕéńňŕđ ďŕäđűőňî˘ęi đŕçäçĺëࢠDrakX çíŕéřî˘ íŕńňóďíű˙ âŕđű˙íňű:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ďŕäđűőňî˘ęŕ đŕçäĺëࢠíĺ ˘äŕëŕń˙: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Äŕëó÷ýííĺ äŕ ńĺňęi"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ŕäëó÷ýííĺ ŕä ńĺňęi"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Óçíięëŕ ďŕěűëęŕ, ˙ęóţ íĺ ŕňđűěëłâŕĺööŕ ęŕđýęňíŕ ŕďđŕöŕâŕöü,\n"
-"ňŕěó ďđŕö˙ăâŕéöĺ íŕ ńâŕţ đűçűęó."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äóáë˙âŕííĺ ďóíęňó ěŕíöiđŕâŕíí˙ %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Íĺęŕňîđű˙ âŕćíű˙ ďŕęĺňű íĺ áűëi ˘ńňŕë˙âŕíű ęŕđýęňíŕ.\n"
-"Äđóăi âŕř cdrom äűńę öi âŕř cdrom ěŕţöü äýôĺęňű.\n"
-"Ďđŕâĺđöĺ cdrom íŕ âŕřűě ęŕěďóňŕđű, âűęŕđűńňî˘âŕţ÷ű\"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Сардэчна запрашаем у %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Äűńęŕâîä íĺäŕńňóďíű"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Ďĺđŕőîä íŕ ęđîę `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ó Âŕřŕé ńińňýěĺ ěŕĺööŕ íĺäŕőîď đýńóđńŕ˘, ňŕěó ěŕă÷űěű ďđŕáëĺěű\n"
-"ďđű ˘ńňŕë˙âŕííi Mandrake Linux. Ó ăýňűě âűďŕäęó ďŕńďđŕáóéöĺ ňýęńňŕâóţ\n"
-"ďđŕăđŕěó ˘ńňŕë˙âŕíí˙. Äë˙ ăýňŕăŕ íŕöińíiöĺ `F1' ó ÷ŕń çŕăđóçęi, ŕ ďîňűě\n"
-"íŕá˙đűöĺ `text' i íŕöińíiöĺ <ENTER>."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Ęëŕń Óńňŕë˙âŕíí˙"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ŕäçií ç ęëŕńࢠóńňŕë˙âŕíí˙:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ŕăóëüíű ďŕěĺđ äë˙ ŕáđŕíűő ăđóďࢠďđűáëiçíŕ đî˘íű %d Ěá.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ęŕëi âű ćŕäŕĺöĺ ˘ńňŕë˙âŕöü ěĺíĺé ăýňŕăó ďŕěĺđó,\n"
-"ŕá˙đűöĺ ŕäńîňŕę ďŕęĺňŕ˘, ˙ęi âű ćŕäŕĺöĺ ˘ńňŕë˙âŕöü.\n"
-"\n"
-"Ďđű íiçęiě ŕäńîňęó áóäóöü óńňŕë˙âŕíű ňîëüęi íŕéáîëüř âŕćíű˙ ďŕęĺňű,\n"
-"ŕ ďđű 100% áóäóöü óńňŕë˙âŕíű ˘ńĺ ŕáđŕíű˙ ďŕęĺňű."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Íŕ âŕřűě äűńęó ¸ńöü ěĺńöŕ ňîëüęi äë˙ %d%% ăýňűő ďŕęĺňŕ˘.\n"
-"\n"
-"Ęŕëi âű ćŕäŕĺöĺ ˘ńňŕë˙âŕöü ěĺíĺé ăýňŕăŕ, ňî\n"
-"ďŕçíŕ÷öĺ ŕäńîňŕę ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙.\n"
-"Ďđű ěŕëűě ŕäńîňęó áóäóöü óńňŕë˙âŕíű íŕéáîëüř âŕćíű˙ ďŕęĺňű;\n"
-"ďđű ŕäńîňęó %d%% áóäçĺ ˘ńňŕë˙âŕíŕ ńňîëüęi ďŕęĺňࢠęîëüęi ěŕă÷űěŕ."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Áîëüř äŕęëŕäíű âűáŕđ ěîćíŕ áóäçĺ çđŕáiöü íŕ íŕńňóďíűě ęđîęó."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Ŕäńîňŕę ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Âűáŕđ ăđóďű ďŕęĺňŕ˘"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Ŕńŕáińňű âűáŕđ ďŕęĺňŕ˘"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ŕăóëüíű ďŕěĺđ: %d / %d Má"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Äđýííű ďŕęĺň"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Iě˙: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Âĺđńi˙: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ďŕěĺđ: %d Ká\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Çíŕ÷íŕńöü: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Âű íĺ ěîćŕöĺ âűáđŕöü ăýňű ďŕęĺň, ňŕěó ˙ę íĺ őŕďŕĺ ěĺńöŕ äë˙ ˙ăî ˘ńňŕë˙âŕíí˙"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Íŕńňóďíű˙ ďŕęĺňű áóäóöü äŕäŕíű äŕ ńińňýěű"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Íŕńňóďíű˙ ďŕęĺňű áóäóöü âűäŕëĺíű"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Âű íĺ ěîćŕöĺ âűëó÷ŕöü ł ŕäě˙í˙öü âűëó÷ýííĺ ăýňŕăŕ ďŕęĺňó"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ăýňŕ ŕáŕâ˙çęîâű ďŕęĺň, ˙ăî âűëó÷ýííĺ íĺëüăŕ ŕäě˙íiöü"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Âű íĺ ěîćŕöĺ ŕäě˙íiöü âűëó÷ýííĺ ăýňŕăŕ ďŕęĺňó. ¨í óćî ˘ńňŕë˙âŕíű"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ăýňű ďŕęĺň ďŕâiíĺí áűöü ŕáíî˘ëĺíű\n"
-"Âű ˘ďý˘íĺíű, řňî őî÷ŕöĺ ŕäě˙íiöü âűëó÷ýííĺ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Âű íĺ ěîćŕöĺ ŕäě˙íiöü âűëó÷ýííĺ ăýňŕăŕ ďŕęĺňó. ßăî ďŕňđýáíŕ ŕáíŕâiöü"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Óńňŕ븢ęŕ"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Çŕőŕâŕííĺ íŕ äűńęĺňó"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Ŕńŕáińňű âűáŕđ ďŕęĺňŕ˘"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Âűäŕëiöü ç ńińňýěű"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Âűáŕđ ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Óńňŕ븢âŕĺě"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "×ŕęŕĺööŕ"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Çŕńňŕëîń˙ ÷ŕńó "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Ďŕäđűőňî˘ęŕ ˘ńňŕë˙âŕíüí˙"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ďŕęĺňŕ˘"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Óńňŕë˙âŕííĺ ďŕęĺňó %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Ďđűí˙öü"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Ŕäęŕçŕöü"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Çě˙íiöĺ âŕř Cd-Rom!\n"
-"\n"
-"Ęŕëi ëŕńęŕ, óńňŕ˘öĺ Cd-Rom, ďŕçíŕ÷ŕíű \"%s\", ó âŕř äűńęŕâîä i íŕöińíiöĺ Oę "
-"ďŕńë˙.\n"
-"Ęŕëi âű íĺ ěŕĺöĺ ˙ăî, íŕöińíiöĺ Ŕäě˙íiöü, ęŕá ŕäě˙íiöü óńňŕë˙âŕííĺ ç ăýňŕăŕ "
-"Cd."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Óń¸ đî˘íŕ ďđŕö˙ăâŕöü?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Ŕňđűěŕëŕń˙ ďŕěűëęŕ ˘ďŕđŕäęŕâŕíí˙ ďŕęĺňŕ˘:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Ŕňđűěŕëŕń˙ ďŕěűëęŕ ˘ďŕđŕäęŕâŕíí˙ ďŕęĺňŕ˘:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ŕäáűëŕń˙ ďŕěűëęŕ"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Ëłöýíçłéíŕ˙ äŕěîâŕ"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Ęëŕâi˙ňóđŕ"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ňűď ęëŕâi˙ňóđű."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "ßęi ęëŕń óńňŕë˙âŕíí˙ âű ćŕäŕĺöĺ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Install/Update"
-msgstr "Óńňŕ븢ęŕ"
-
-#: ../../install_steps_interactive.pm_.c:226
-#, fuzzy
-msgid "Is this an install or an update?"
-msgstr "Ŕá˙đűöĺ ˘ńňŕë˙âŕííĺ öi ŕáíŕ˘ëĺííĺ"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Đýęŕěĺíäŕâŕíŕ"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ýęńďĺđň"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Ŕńŕáińňű âűáŕđ ďŕęĺňŕ˘"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ ňűď âŕřŕé ěűřű."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Ďîđň ěűřű"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ ďîńë˙äî˘íű ďîđň, äŕ ˙ęîăŕ ďŕäęëţ÷ŕíŕ âŕřŕ˙ ěűř."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Íŕńňđîéęŕ ęŕđň PCMCIA ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Íŕńňđîéęŕ IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "í˙ěŕ äŕńňóďíűő đŕçäçĺëŕ˘"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Ŕá˙đűöĺ ďóíęňű ěŕíöiđŕâŕíí˙"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ňŕáëiöŕ đŕçäçĺëࢠíĺ ÷űňŕĺööŕ, ˙íŕ çŕíŕäňŕ ńŕďńŕâŕíŕ˙ äë˙ ěĺí˙ :(\n"
-"Ďŕńďđŕáóţ ińöi äŕëĺé i áóäó ďđŕďóńęŕöü äđýííű˙ đŕçäçĺëű (Óńĺ ÄŔÄĹÇĹÍŰß\n"
-"áóäóöü ńňđŕ÷ŕíű!). Iířŕĺ đŕřýííĺ íĺ äŕçâîëiöü DrakX çě˙íiöü ňŕáëiöó "
-"đŕçäçĺëŕ˘.\n"
-"(ďŕěűëęŕ ˘ %s)\n"
-"\n"
-"Öi ćŕäŕĺöĺ ńňđŕöiöü óńĺ đŕçäçĺëű?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake íĺ çěîă ďđŕâiëüíŕ ďđŕ÷űňŕöü ňŕáëiöó đŕäçĺëŕ˘.\n"
-"Ďđŕö˙ăâŕéöĺ ňîëüęi íŕ ńâŕţ đűçűęó!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Ęŕđŕí¸âű đŕçäçĺë íĺ çíîéäçĺíű"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Ęŕđŕí¸âű đŕçäçĺë"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "ßęi đŕäçĺë ęŕđŕí¸âű (/) äë˙ âŕřŕé ńińňýěű?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Ęŕá ěŕäűôięŕöű˙ ňŕáëiöű đŕçäçĺëࢠçäĺéńíiëŕń˙, ďŕňđýáíŕ ďĺđŕçŕăđóçęŕ."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Âűáŕđ đŕçäçĺëࢠäë˙ ôŕđěŕňŕâŕíí˙"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Ďđŕâĺđűöü íŕ íŕ˙˘íŕńöü äđýííűő áëîęŕ˘?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Ôŕđěŕňŕâŕíí˙ đŕçäçĺëŕ˘"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Ńňâŕđýííĺ i ôŕđěŕňŕâŕííĺ ôŕéëŕ %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Íĺ őŕďŕĺ ěĺńöŕ ˘ áóôĺđű ďŕäęŕ÷ęi (swap) äë˙ ˘ńňŕë˙âŕíí˙, ďŕâ˙ëi÷öĺ ˙ăî."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ďđŕăë˙ä äŕńňóďíűő ďŕęĺňŕ˘"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ďîřóę ďŕęĺňࢠäë˙ ŕáíŕ˘ëĺíí˙"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Âŕřŕ ńińňýěŕ íĺ ěŕĺ äŕńňŕęîâŕ ěĺńöŕ äë˙ ˘ńňŕë˙âŕíí˙ öi ŕáíŕ˘ëĺíí˙ (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Ďî˘íű (%dMá)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Ěiíiěŕëüíű (%dMá)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Đýęŕěĺíäŕâŕíŕ (%dĚá)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Ŕäíŕ˘ëĺííĺ ç äűńęĺňű"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Ŕäíŕ˘ëĺííĺ ç äűńęĺňű"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Âűáŕđ ăđóďű ďŕęĺňŕ˘"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Óńňŕ˘öĺ äűńęĺňó ˘ äűńęŕâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Çŕőŕâŕííĺ íŕ äűńęĺňó"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Âűáŕđ ďŕęĺňࢠäë˙ óńňŕë˙âŕíí˙"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "×ŕęŕéöĺ"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ęŕëi âű ěŕĺöĺ ˘ńĺ CD äűńęi ńŕ ńďińŕ íićýé, íŕöińíiöĺ Îę.\n"
-"Ęŕëi âű íĺ ěŕĺöĺ ŕíi âîäíŕăŕ ç ăýňűő CD äűńęŕ˘, íŕöińíiöĺ Ŕäě˙íiöü.\n"
-"Ęŕëi íĺęŕňîđűő ç CD äűńęࢠíĺ ěŕĺöĺ, ŕäě˙íiöĺ iő âűäç˙ëĺííĺ i íŕöińíiöĺ Îę."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ďŕçíŕ÷ŕíű \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ďŕäđűőňî˘ęŕ ˘ńňŕë˙âŕíüí˙"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Óńňŕë˙âŕííĺ ďŕęĺňó %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Íŕńňđîéęŕ ďŕńë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Óńňŕ˘öĺ äűńęĺňó ˘ äűńęŕâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Óńňŕ˘öĺ äűńęĺňó ˘ äűńęŕâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Çŕđŕç âű ěŕĺöĺ ěŕă÷űěŕńöü çŕăđóçiöü ďđŕăđŕěű äë˙ řűôđŕâŕíí˙.\n"
-"\n"
-"ÓÂŔĂŔ:\n"
-"\n"
-"Ç-çŕ ŕăóëüíűő ŕáěĺćŕâŕíí˙˘ íŕ ďđŕăđŕěű ăýňęŕăŕ đîäó i đîçíűő ďŕí˙öö˙˘\n"
-"ó đîçíűő çŕęîíŕäŕ˘ńňâŕő, ďđŕäŕâĺö i/ŕëüáî ęŕđűńňŕëüíię ăýňűő ďđŕăđŕě "
-"ďŕâiíĺí\n"
-"óďý˘íiööŕ ˘ ňűě, řňî çŕęîíű ˙ăî/iő äç˙đćŕâࢠäŕçâŕë˙ţöü çŕăđóćŕöü, "
-"çŕőî˘âŕöü\n"
-"i/ŕëüáî âűęŕđűńňî˘âŕöü ăýňű˙ ďđŕăđŕěű.\n"
-"\n"
-"Ŕęđŕě˙ ňŕăî, ďđŕäŕâĺö i/ŕëüáî ęŕđűńňŕëüíię ďŕâiííű áűöü óďý˘íĺíű, řňî íĺ "
-"ďŕđóřŕţöü\n"
-"çŕęîíࢠńâŕ¸é ęđŕiíű. Ęŕëi ďđŕäŕâĺö i/ŕëüáî ęŕđűńňŕëüíię ďŕđóřŕĺ ăýňű˙\n"
-"çŕęîíű, ˙ęi˙ ěîăóöü áűöü ńęŕđűńňŕíű˙ ńóďđŕöü ˙ăî, ¸í/˙íű í˙ńĺ ŕäęŕçíŕńöü\n"
-"\n"
-"Íi ˘ ˙ęiě đŕçĺ íi Mandrakesoft, íi ˙ĺ âűęŕíŕ˘öű i ďŕńňŕ˘ř÷űęi íĺ ŕäęŕçâŕţöü\n"
-"çŕ íĺďŕńđýäíóţ, íĺďđŕěóţ ŕëüáî âűďŕäęîâóţ řęîäó (řňî óęëţ÷ŕĺ, ŕëĺ \n"
-"íĺ ŕáě˙ćî˘âŕĺööŕ ńňđŕ÷ŕíűěł ďđűáűňęŕě, ďŕđóřýííĺ áiçíýńó, ńňđŕňŕé "
-"ęŕěĺđöűéíűő \n"
-"äŕäçĺíűő i iířűěi ńňđŕňŕěi, ŕ ňŕęńŕěŕ ěŕă÷űěűěi ńŕíęöű˙ěi i řňđŕôŕěi, ˙ęi˙ \n"
-"íŕëĺćűöü âűďëŕöiöü ďŕ ďŕńňŕíîâĺ ńóäó), ˙ęi˙ âűö˙ęŕţöü ç ęŕđűńňŕíí˙, \n"
-"âŕëîäŕíí˙, ŕëüáî ďđîńňŕ çŕăđóçęi ç ńĺňęi ďđŕăđŕě, äŕ ˙ęiő ďđŕäŕâĺö ŕëüáî\n"
-"ęŕđűńňŕëüíię ŕňđűěŕëi äîńňóď ďŕńë˙ ďŕäďińŕíí˙ ăýňŕăŕ ďŕăŕäíĺíí˙.\n"
-"\n"
-"Ăýňŕĺ ďŕăŕäíĺííĺ ˘ ďĺđřóţ ÷ŕđăó ŕäęŕçâŕĺ çŕęîíŕäŕ˘ńňâó Ôđŕíöűi, çŕ "
-"âűęëţ÷ýííĺě\n"
-"âűďŕäęŕ˘, ˙ęi˙ ńďĺöű˙ëüíŕ đýăëŕěĺíňóţööŕ ě˙ńöîâűě çŕęîíŕäŕ˘ńňâŕě ó ěĺćŕő\n"
-"ăđŕěŕäç˙íńęŕăŕ ďđŕâŕ. Ŕäíŕę äŕäçĺíŕĺ ďŕăŕäíĺííĺ ęŕňýăŕđű÷íŕ ŕáâ˙đăŕĺ ëţáű˙\n"
-"íĺńóŕäíîńiíű çŕęîíŕäŕ˘ńňâŕ˘, ďđűíöűďŕ˘, ŕëüáî ďđűě˙íĺííĺ ŕä ďđîöiëĺăëŕăŕ.\n"
-"Ňŕęiě ÷űíŕě, çŕęîíű Ôđŕíöűi áóäóöü ďđýâŕëiđŕâŕöü íŕä ëţáűěi iířűěi "
-"ě˙ńöîâűěi\n"
-"çŕęîíŕěi.\n"
-"\n"
-"Ç ëţáűěi ďűňŕíí˙ěi, ˙ęi˙ äŕňű÷ŕööŕ äŕäçĺííŕăŕ ďŕăŕäíĺíí˙, çâ˙đňŕéöĺń˙: \n"
-"Mandrakesoft\n"
-"43, rue d'Aboukir\n"
-"75002 Paris\n"
-"FRANCE"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Ńóâ˙çü ç ëţđŕě äë˙ ŕňđűěŕíí˙ ńďińó äŕńňóďíűő ďŕęĺňŕ˘"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Âűáŕđ ëţńňđŕ äë˙ ŕňđűěŕíí˙ ďŕęĺňŕ˘"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Ńóâ˙çü ç ëţđŕě äë˙ ŕňđűěŕíí˙ ńďińó äŕńňóďíűő ďŕęĺňŕ˘"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "ßęi âŕř ÷ŕńŕâű ďî˙ń?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Âŕř ńińňýěíű ăŕäçiííię óńňŕë˙âŕíű íŕ GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS ńĺđâĺđ:"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Ŕääŕëĺíű ńĺđâĺđ CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-#, fuzzy
-msgid "No printer"
-msgstr "Iě˙ äđóęŕđęi"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Öi ¸ńöü ó âŕń iířű?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-#, fuzzy
-msgid "Mouse"
-msgstr "Ďîđň ěűřű"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Ďđűíňýđ"
-
-#: ../../install_steps_interactive.pm_.c:1049
-#, fuzzy
-msgid "ISDN card"
-msgstr "Óíóňđŕíŕ˙ ISDN ęŕđňŕ"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-#, fuzzy
-msgid "Sound card"
-msgstr "Ńňŕíäŕđňíű"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Âűęŕđűńňî˘âŕöü NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Ëŕęŕëüíű ďđűíňýđ"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ďŕđîëü äë˙ root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Í˙ěŕ ďŕđîëţ"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ăýňű ďŕđîëü çŕíŕäňŕ ďđîńňű (˙ăî äŕ˘ćűí˙ ďŕâiííŕ áűöü íĺ ěĺíĺé çŕ %d ëiňŕđŕ˘)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Ŕ˘ňýíňűôięŕöű˙"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Ŕ˘ňýíňűôięŕöű˙"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "ńĺđâĺđ"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Ŕ˘ňýíňűôięŕöű˙ NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domain"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ńĺđâĺđ:"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ç äŕďŕěîăŕé çŕăđóçŕ÷íŕăŕ äűńęŕ âű çěîćŕöĺ çŕăđóćŕöü Linux íĺçŕëĺćíŕ ŕä\n"
-" ńňŕíäŕđňíŕăŕ çŕăđóç÷űęŕ. Ăýňŕ ěîćŕ áűöü ˙ęŕńíŕ, ęŕëi âű íĺ ćŕäŕĺöĺ \n"
-"˘ńňŕ븢âŕöü SILO, ęŕëi iířŕ˙ ŕďĺđŕöűéíŕ˙ ńińňýěŕ âűäŕë˙ĺ SILO, öi SILO íĺ \n"
-"ěîćŕ ďđŕöŕâŕöü ó âŕřŕé ęŕíôiăóđŕöűi. Çŕăđóçŕ÷íű äűńę ňŕęńŕěŕ ěîćŕ áűöü \n"
-"âűęŕđűńňŕí ńóěĺńíŕ ç âűđŕňŕâŕëüíŕé äűńęĺňŕé Mandrake Linux, ˙ęŕ˙ âĺëüěi \n"
-"ďŕëĺă÷űöü âűđŕňŕâŕííĺ ńińňýěű ďŕńë˙ çáîţ.\n"
-"\n"
-"Ęŕëi ćŕäŕĺöĺ ńňâŕđűöü çŕăđóçŕ÷íű äűńę çŕđŕç, óńňŕ˘öĺ äűńęĺňó ˘ ďĺđřű\n"
-"äűńęŕâîä i íŕöińíiöĺ \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Ďĺđřű äűńęŕâîä"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Äđóăi äűńęŕâîä"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ďđŕďóńöiöü"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ç äŕďŕěîăŕé çŕăđóçŕ÷íŕăŕ äűńęó âű çěîćŕöĺ çŕăđóćŕöü Linux ňŕęńŕěŕ ˙ę i \n"
-"ńňŕíäŕđňíűě çŕăđóç÷űęŕě. Ăýňŕ ěîćŕ áűöü ˙ęŕńíŕ, ęŕëi âű íĺ ćŕäŕĺöĺ \n"
-"˘ńňŕ븢âŕöü LILO (öi Grub), ęŕëi iířŕ˙ ŕďĺđŕöűéíŕ˙ ńińňýěŕ âűäŕë˙ĺ LILO,\n"
-"öi LILO íĺ ěîćŕ ďđŕöŕâŕöü ó âŕřŕé ęŕíôiăóđŕöűi. Çŕăđóçŕ÷íű äűńę ňŕęńŕěŕ "
-"ěîćŕ\n"
-"áűöü âűęŕđűńňŕíű ńóěĺńíŕ ç đŕěîíňíŕé äűńęĺňŕé Mandrake Linux, ˙ęŕ˙ âĺëüěi \n"
-"ďŕëĺă÷űöü âűđŕňŕâŕííĺ ńińňýěű ďŕńë˙ çáîţ.\n"
-"\n"
-"Ćŕäŕĺöĺ ńňâŕđűöü çŕăđóçŕ÷íű äűńę çŕđŕç?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Âűáŕ÷ŕéöĺ, ŕëĺ äűńęŕâîä íĺäŕńňóďíű"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Ŕá˙đűöĺ äűńęŕâîä, ó ˙ęiě áóäçĺ ńňâŕđŕööŕ çŕăđóçŕ÷íŕ˙ äűńęĺňŕ"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Óńňŕ˘öĺ äűńęĺňó ˘ äűńęŕâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Ńňâŕđýííĺ çŕăđóçŕ÷íŕé äűńęĺňű"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ďŕäđűőňî˘ęŕ çŕăđóç÷űęŕ"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ďŕěűëęŕ ˘ńňŕë˙âŕíí˙ ŕboot, \n"
-"ńďđŕáŕâŕöü óńňŕ븢âŕöü, íĺăëĺäç˙÷ű íŕ ěŕă÷űěŕńöü ďŕđóřýíí˙ ďĺđřŕăŕ đŕçäĺëó?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Óńňŕë˙âŕííĺ çŕăđóç÷űęó"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Ďđŕöýń óńňŕë˙âŕíí˙ çŕăđóç÷űęŕ íĺ ŕňđűěŕ˘ń˙. Óçíięëŕ íŕńňóďíŕ˙ ďŕěűëęŕ:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Óńňŕ˘öĺ äűńęĺňó ˘ äűńęŕâîä %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Ńňâŕđýííĺ äűńęĺňű äë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Íĺęŕňîđű˙ ęđîęi íĺ çŕâĺđřŕíű.\n"
-"Âű ńŕďđŕ˘äű ćŕäŕĺöĺ âűéńöi çŕđŕç?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Âiířóĺě, óńňŕë˙âŕííĺ çŕâĺđřŕíŕ.\n"
-"Âűäŕëiöĺ çŕăđóçŕ÷íű äűńę i íŕöińíiöĺ enter äë˙ ďĺđŕçŕăđóçęi.\n"
-"\n"
-"\n"
-"Çŕ iíôŕđěŕöű˙é ďđŕ çě˙íĺííi äŕäçĺíŕăŕ âűďóńęó Mandrake Linux,\n"
-"çâ˙đňŕéöĺńü íŕ \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Iíôŕđěŕöű˙ ďŕ íŕńňđîéęĺ âŕřŕé ńińňýěű ¸ńňü ˘ ďŕńë˙-˘ńňŕë¸âŕ÷íŕé\n"
-"ăëŕâĺ âŕřŕăŕ Äŕďŕěîćíięŕ Ęŕđűńňŕëüíięó ç Ŕôiöűéíŕăŕ Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Ńňâŕđýííĺ äűńęĺňű äë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Ŕ˘ňŕěŕňű÷íű"
-
-#: ../../install_steps_interactive.pm_.c:1361
-#, fuzzy
-msgid "Replay"
-msgstr "Ďĺđŕçŕăđóçiöü"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Ŕńŕáińňű âűáŕđ ďŕęĺňŕ˘"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Óńňŕë˙âŕííĺ Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> ďŕěić ýëĺěĺíňŕěi | <Space> âűáŕđ | <F12> íŕńňóďíű ýęđŕí "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Ŕá˙đűöĺ äçĺ˙ííĺ"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Ęŕëi ëŕńęŕ, ďŕ÷ŕęŕéöĺ"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Iíôŕđěŕöű˙"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Đŕçăŕđíóöü äđýâŕ"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Çăŕđíóöü äđýâŕ"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Ďĺđŕęëţ÷ýííĺ ďŕěić óďŕđŕäęŕâŕííĺě ďŕ ăđóďĺ i ŕńîáęŕő"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Äđýííű âűáŕđ, ďŕńďđŕáóéöĺ ˙ř÷ĺ\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Âŕř âűáŕđ? (çěî˘÷ŕííĺ %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Âŕř âűáŕđ? (çěî˘÷ŕííĺ %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Îďöűi: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Âŕř âűáŕđ? (çěî˘÷ŕííĺ %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "×ĺřńęi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Í˙ěĺöęi"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Ińďŕíńęi"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Ôiíńęi"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ôđŕíöóçńęi"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Íŕđâĺćńęi"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Ďîëüńęi"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Đóńęi"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Řâĺöęi"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK ęëŕâi˙ňóđŕ"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US ęëŕâi˙ňóđŕ"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iđŕíńęi"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Ŕđě˙íńęi (ńňŕđű)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Ŕđě˙íńęi (typewriter)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Ŕđě˙íńęi (ôŕíĺňű÷íű)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Ŕçĺđáŕéäćŕíńęł (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Áĺëüăiéńęi"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Ŕđě˙íńęi (ôŕíĺňű÷íű)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Áŕëăŕđńęi"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Áđŕçiëüńęi (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Áĺëŕđóńęł"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Řâĺéöŕđńęi (Í˙ěĺöęŕ˙ đŕńęëŕäęŕ)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Řâĺéöŕđńęi (Ôđŕíöóçńęŕ˙ đŕńęëŕäęŕ)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "×ĺřńęi (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Í˙ěĺöęi (í˙ěŕ çŕáëŕęiđŕâŕíűő ęëŕâiř)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Äŕöęi"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Íŕđâĺćńęi)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Ýńňîíńęi"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ăđóçiíńęi (\"Đóńęŕ˙\" đŕńęëŕäęŕ)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ăđóçiíńęi (\"Ëŕöiíńęŕ˙\" đŕńęëŕäęŕ)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Ăđý÷ŕńęi"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ěŕäü˙đńęi"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Őŕđâŕöęi"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "I˘đűň"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "I˘đűň (ôŕíĺňű÷íű)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iđŕíńęi"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Ińëŕíäńęi"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Iňŕëü˙íńęi"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "ßďîíńęi 106 ęëŕâiř"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "UK ęëŕâi˙ňóđŕ"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Ëŕöiíŕ-Ŕěĺđűęŕíńęi"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëiňî˘ńęi AZERTY (ńňŕđű)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëiňî˘ńęi AZERTY (íîâű)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëiňî˘ńęi \"íóěŕđ đŕäęŕ\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëiňî˘ńęi \"ôŕíĺňű÷íű\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Đŕçěĺđęŕâŕííĺ"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Ăŕëŕíäńęi"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Ďîëüńęi (ńňŕíäŕđňíŕ˙ đŕńęëŕäęŕ)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Ďîëüńęi (qwertz đŕńęëŕäęŕ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Ďŕđňóăŕëüńęi"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Ęŕíŕäńęi (Ęâĺáýę)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Đóńęi (ß-Â-Ĺ-Đ-Ň-Č)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Đóńęi (ß-Â-Ĺ-Đ-Ň-Č)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Đóńęi (ß-Â-Ĺ-Đ-Ň-Č)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Ńëŕâĺíńęi"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Ńëŕâŕöęi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Ńëŕâŕöęi (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Ŕçĺđáŕéäćŕíńęł (ęłđűëłöŕ)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Ňŕáëiöŕ"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Ňŕéńęŕ˙ ęëŕâi˙ňóđŕ"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Ňŕéńęŕ˙ ęëŕâi˙ňóđŕ"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Ňóđýöęi (ňđŕäűöű¸íŕ˙ \"F\" ěŕäýëü)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Ňóđýöęi (ńó÷ŕńíŕ˙ \"Q\" ěŕäýëü)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Óęđŕiíńęi"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US ęëŕâi˙ňóđŕ (ěićíŕđîäíŕ˙)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Âüĺňíŕěńęi \"íóěŕđ đŕäęŕ\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Ŕçĺđáŕéäćŕíńęł (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ěŕíöiđŕâŕííĺ äűńęó %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Ěűř"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Çâű÷ŕéíŕ˙ ěűř ç 2 ęíîďęŕěł"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-#, fuzzy
-msgid "1 button"
-msgstr "2 ęíîďęi"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Çâű÷ŕéíŕ˙ ěűř ç 2 ęíîďęŕěł"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Ŕăóëüíű"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ç ęîëŕě"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "ďŕńë˙äî˘íŕ˙"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Çâű÷ŕéíŕ˙ ěűř ç 3 ęíîďęŕěł"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ďŕńë˙äî˘íŕ˙, ńňŕđű ňűď C7)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "Í˙ěŕ ěűřű"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 ęíîďęi"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 ęíîďęi"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "í˙ěŕ"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Í˙ěŕ ěűřű"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Ęŕëł ëŕńęŕ, çđŕáłöĺ íĺęŕëüęł đóőࢠěűřřó."
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Ęŕëł ëŕńęŕ, çđŕáłöĺ íĺęŕëüęł đóőࢠěűřřó."
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "Đóřöĺ ęîëŕě ěűřű!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-#, fuzzy
-msgid "Finish"
-msgstr "Ôiíńęi"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Äŕëĺé ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ăýňŕ äŕęëŕäíŕ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Äŕëó÷ýííĺ äŕ Iíňýđíýňó"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "âűęŕđűńňî˘âŕöü pppoe"
-
-#: ../../network/adsl.pm_.c:22
-#, fuzzy
-msgid "use pptp"
-msgstr "âűęŕđűńňî˘âŕöü pppoe"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ßęi dhcp ęëiĺíň âű ďëŕíóĺöĺ âűęŕđűńňî˘âŕöü?\n"
-"Ďŕ çěî˘÷ŕííţ, ăýňŕ dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-#, fuzzy
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Íi âîäíű ethernet ńĺňęŕâű ŕäŕďňŕđ ó âŕřŕé ńińňýěĺ íĺ âűçíŕ÷ŕíű. Ęŕëi ëŕńęŕ, "
-"ńęŕđűńňŕéöĺ ęŕíôiăóđŕöűéíű iíńňđóěýíň."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Ďŕçíŕ÷öĺ ńĺňęŕâű iíňýđôĺéń"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ ńĺňęŕâű ŕäŕďňŕđ, ˙ęi ďëŕíóĺöĺ âűęŕđűńňî˘âŕöü äë˙ "
-"äŕëó÷ýíí˙ äŕ iíňýđíýň"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ńĺňęŕâŕ˙ ęŕđňŕ íĺ çíîéäçĺíŕ"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Íŕńňđîéęŕ ńĺňęi"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Óâ˙äçiöĺ iě˙ ńâŕ¸é ěŕřűíű (host).\n"
-"Iě˙ âŕřŕé ěŕřűíű ďŕâiííŕ áűöü çŕäŕäçĺíŕ ďî˘íŕńöţ,\n"
-"íŕďđűęëŕä ``mybox.mylab.myco.com''.\n"
-"Âű ěîćŕöĺ ňŕęńŕěŕ ˘âĺńöi IP ŕäđŕń řëţçó, ęŕëi ¸í ó âŕń ¸ńöü."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Iě˙ ěŕřűíű"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Óíóňđŕíŕ˙ ISDN ęŕđňŕ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Óíóňđŕíŕ˙ ISDN ęŕđňŕ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ßęi ňűď âŕřŕăŕ ISDN çëó÷ýíí˙?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Çíîéäçĺíŕ ńłńňýěŕ ńĺňęŕâŕé á˙ńďĺęł (firewall)!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Çíîéäçĺíŕ ńłńňýěŕ ńĺňęŕâŕé á˙ńďĺęł (firewall)!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Íŕńňđîéęŕ ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Ŕá˙đűöĺ âŕřŕăŕ ďđŕâŕéäŕđŕ.\n"
-"ęŕëi ˙ăî í˙ěŕ ˘ ăýňűě ńďińĺ, ŕá˙đűöĺ ňűď ``Iířű''"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Ţđîďŕ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Ďŕäęëţ÷ýííĺ"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ďŕäęëţ÷ýííĺ \n"
-" íĺ ďđŕç D-ęŕíŕë (âűëó÷ŕíű˙ ęŕíŕëű)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "ßęi ďđŕňŕęîë âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "ßęi ňűď ęŕđňű âű ěŕĺöĺ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Íĺ â˙äîěŕ"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ęŕëi âű ěŕĺöĺ ISA ęŕđňó, âĺëi÷űíi íŕ íŕńňóďíűě ýęđŕíĺ ďŕâiííű áűöü "
-"ńŕďđŕ˘äíűěi.\n"
-"\n"
-"Ęŕëi âű ěŕĺöĺ PCMCIA ęŕđňó, âű ďŕâiííű âĺäŕöü irq i io âŕřŕé ęŕđňű.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Ŕäě˙íiöü"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Ďđŕö˙ăíóöü"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "ßęŕ˙ ˘ âŕń ISDN ęŕđňŕ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Âűçíŕ÷ŕíŕ ISDN PCI ęŕđňŕ, ŕëĺ íĺâ˙äîěű ˙ĺ ňűď. Ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ PCI "
-"ęŕđňó íŕ íŕńňóďíűě ýęđŕíĺ."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ęŕđňŕ ISDN PCI íĺ çíîéäçĺíŕ. Ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ íŕ íŕńňóďíűě ýęđŕíĺ."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Äŕ ˙ęîăŕ ďŕńë˙äî˘íŕăŕ ďîđňó äŕëó÷ŕíű ěŕäýě?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Ďŕđŕěĺňđű ęŕěóňŕâŕíŕăŕ çëó÷ýíí˙ (Dialup)"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Iě˙ çëó÷ýíí˙"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Íóěŕđ ňýëĺôîíó"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Iě˙ (login ID)"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "íŕ ŕńíîâĺ ńęđűďňó"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "íŕ ŕńíîâĺ ňýđěiíŕëó"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Iě˙ äŕěĺíó"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Ďĺđřű ńĺđâĺđ DNS"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Äđóăi ńĺđâĺđ DNS:"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Âű ěîćŕöĺ ŕäęëţ÷űööŕ öł ďĺđŕęŕíôłăóđŕâŕöü âŕřŕĺ çëó÷ýííĺ."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Âű ěîćŕöĺ ŕäęëţ÷űööŕ öł ďĺđŕęŕíôłăóđŕâŕöü âŕřŕĺ çëó÷ýííĺ."
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "ßę âű ďëŕíóĺöĺ äŕëó÷űööŕ äŕ Iíňýđíýňó?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Âű ěîćŕöĺ ŕäęëţ÷űööŕ öł ďĺđŕęŕíôłăóđŕâŕöü âŕřŕĺ çëó÷ýííĺ."
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "ßę âű ďëŕíóĺöĺ äŕëó÷űööŕ äŕ Iíňýđíýňó?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Iě˙ çëó÷ýíí˙"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Íŕńňđîéęŕ ISDN"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Íŕńňđîéęŕ ńĺňęi"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Iíňýđíýň çëó÷ýííĺ i ęŕíôiăóđŕöű˙"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Âű ěîćŕöĺ ŕäęëţ÷űööŕ öł ďĺđŕęŕíôłăóđŕâŕöü âŕřŕĺ çëó÷ýííĺ."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Âű ěîćŕöĺ ŕäęëţ÷űööŕ öł ďĺđŕęŕíôłăóđŕâŕöü âŕřŕĺ çëó÷ýííĺ."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Ŕá˙đűöĺ ŕńíî˘íŕăŕ ęŕđűńňŕëüíięŕ:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Âűçíŕ÷ýííĺ ďđűëŕäŕ˘..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Äóáë˙âŕííĺ ďóíęňó ěŕíöiđŕâŕíí˙ %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Íŕńňđîéęŕ ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Đŕçěĺđęŕâŕííĺ"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Ńĺňęŕâű iíňýđôĺéń"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Çëó÷ýííĺ ďđűíňýđó"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Çëó÷ýííĺ ďđűíňýđó"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "LAN connection"
-msgstr "Đŕçěĺđęŕâŕííĺ"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Ŕá˙đűöĺ iíńňđóěĺíň, ˙ęi ćŕäŕĺöĺ ńęŕđűńňŕöü"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Âű ćŕäŕĺöĺ, ęŕá ăýňŕĺ çëó÷ýííĺ ńňŕđňŕâŕëŕ ďđű çŕăđóçöű?"
-
-#: ../../network/netconnect.pm_.c:247
-#, fuzzy
-msgid "Network configuration"
-msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Ęŕëi ëŕńęŕ, óâ˙äçiöĺ IP ęŕíôiăóđŕöűţ äë˙ âŕřŕé ěŕřűíű.\n"
-"Ęîćíű ďóíęň ďŕâiíĺí áűöü çŕďî˘íĺíű ˙ę IP ŕäđŕń ˘ äçĺń˙ňęîâŕ-ęđîďęŕâŕé \n"
-"íŕňŕöűi (íŕďđűęëŕä, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Íŕńňđîéęŕ ńĺňęŕâŕé ďđűëŕäű %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Ńĺđâĺđ XFree86: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ŕäđŕń"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Ěŕńęŕ ńĺňęi"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Ŕ˘ňŕěŕňű÷íű IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ŕäđŕń ďŕâiíĺí áűöü ó ôŕđěŕöĺ 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Óâ˙äçiöĺ iě˙ ńâŕ¸é ěŕřűíű (host).\n"
-"Iě˙ âŕřŕé ěŕřűíű ďŕâiííŕ áűöü çŕäŕäçĺíŕ ďî˘íŕńöţ,\n"
-"íŕďđűęëŕä ``mybox.mylab.myco.com''.\n"
-"Âű ěîćŕöĺ ňŕęńŕěŕ ˘âĺńöi IP ŕäđŕń řëţçó, ęŕëi ¸í ó âŕń ¸ńöü."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ńĺđâĺđ"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Ďđűëŕäŕ-řëţç"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Íŕńňđîéęŕ proxy ęýřóţ÷űő ńĺđâĺđŕ˘"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy ďŕâiíĺí áűöü http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy ďŕâiíĺí áűöü ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Íŕńňđîéęŕ çëó÷ýíí˙ ç Iíňýđíýňŕě"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Öi ćŕäŕĺöĺ çŕđŕç ďŕńďđŕáŕâŕöü äŕëó÷űööŕ äŕ Iíňýđíýňó?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "ßęi ňűď âŕřŕăŕ ISDN çëó÷ýíí˙?"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "ßę âű ďëŕíóĺöĺ äŕëó÷űööŕ äŕ Iíňýđíýňó?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"\n"
-"Âű ěîćŕöĺ ŕäęëţ÷űööŕ öł ďĺđŕęŕíôłăóđŕâŕöü âŕřŕĺ çëó÷ýííĺ."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Íŕńňđîéęŕ äŕëó÷ýíí˙ äŕ Iíňýđíýňó"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Ęŕëi ëŕńęŕ, çŕďî˘íiöĺ öi ďŕçíŕ÷öĺ ďîëĺ íićýé"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ ęŕđňű"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Ŕäđŕńű ďŕě˙öł ęŕđňű (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO ęŕđňű"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 ęŕđňű"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 ęŕđňű"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Âŕř ŕńŕáińňű ňýëĺôîííű íóěŕđ"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Iě˙ ďđŕâŕéäŕđó, íŕďđűęëŕä ďđŕâŕéäŕđ.net"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Íóěŕđ ňýëĺôîíó ďđŕâŕéäŕđŕ"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 ďđŕâŕéäŕđó"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 ďđŕâŕéäŕđó"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Âűáŕđ ęëŕâi˙ňóđű"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Đýćűě çëó÷ýíí˙"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Iě˙ çëó÷ýíí˙"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Iě˙ çëó÷ýíí˙"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Iě˙ äë˙ ˘âŕőîäó (iě˙ ęŕđűńňŕëüíięó)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Ďŕđîëü äë˙ ˘âŕőîäó"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ďŕěűëęŕ ěŕíöiđŕâŕíí˙: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ďŕřűđŕíű đŕçäçĺë íĺ ďŕäňđűěëiâŕĺööŕ ăýňŕé ďëŕňôîđěŕé"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Âű ěŕĺöĺ äçiđęó ˘ ňŕáëiöű đŕäçĺëŕ˘, ŕëĺ ˙ íĺ ěŕţ ěŕă÷űěŕńöi ˙ĺ ńęŕđűńňŕöü.\n"
-"Ŕäçiíű âűőŕä ó ňűě, ęŕá ďĺđŕě˙ńöiöü ďĺđřŕńíű˙ đŕçäçĺëű ňŕę, ęŕá äçiđęŕ iřëŕ\n"
-"ŕäđŕçó çŕ ďŕřűđŕíűě (extended) đŕçäçĺëŕě"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ŕäíŕ˘ëĺííĺ ç ôŕéëŕ %s íĺ ŕňđűěŕëŕń˙: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Ďŕěűëęŕ çŕďińó ˘ ôŕéë %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ďŕâiííű ěĺöü"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "âŕćíŕ"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "âĺëüěi äîáđŕ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "äîáđŕ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ěîćŕ áűöü"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Ëŕęŕëüíű ďđűíňýđ"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Ŕääŕëĺíű ńĺđâĺđ CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Ŕääŕëĺíű ńĺđâĺđ lpd"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Ńĺňęŕâű ďđűíňýđ (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Ńĺđâĺđ äđóęó"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI ďđűíňýđó"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Ëŕęŕëüíű ďđűíňýđ"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Ďŕěűëęŕ çŕďińó ˘ ôŕéë %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(ěîäóëü %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ńĺđâĺđŕ SMB"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Ďŕ äŕěŕ˘ëĺííţ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Âűáŕđ ňűďó çëó÷ýíí˙ ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ßę ďđűíňŕđ äŕëó÷ŕíű?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Ŕääŕëĺíű CUPS ńĺđâĺđ íĺ ďŕňđŕáóĺ ŕä Âŕń íŕńňđîéęł ďđűíňýđó\n"
-"íŕ ăýňŕé ěŕřűíĺ, ¸í áóäçĺ çíîéäçĺíű ŕ˘ňŕěŕňű÷íŕ.\n"
-"Ęŕëł Âű íĺ ˘ďý˘íĺíű, ŕá˙đűöĺ \"Ŕääŕëĺíű ńĺđâĺđ CUPS\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Íŕńňđîéęŕ"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Ŕääŕëĺíű ńĺđâĺđ CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ŕäđŕń ďŕâiíĺí áűöü ó ôŕđěŕöĺ 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP ńĺđâĺđŕ SMB"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Ďîđň"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Íŕńňđîéęŕ ěŕäýěó"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Âűçíŕ÷ýííĺ ďđűëŕäŕ˘..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Ďđŕâĺđęŕ ďŕđňî˘"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Iě˙ äđóęŕđęi"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Ëŕęŕëüíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Äóáë˙âŕííĺ ďóíęňó ěŕíöiđŕâŕíí˙ %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "URI ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Ëŕęŕëüíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Äŕ ˙ęîăŕ ďŕńë˙äî˘íŕăŕ ďîđňó äŕëó÷ŕíű ěŕäýě?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "URI ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Íŕńňđîéęŕ"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Óńňŕë˙âŕííĺ ďŕęĺňó %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Óńňŕë˙âŕííĺ ďŕęĺňó %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "×űňŕţ áŕçó äŕäçĺíűő äđŕéâĺđî˘ CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "×űňŕţ áŕçó äŕäçĺíűő äđŕéâĺđî˘ CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Îďöűi ŕääŕëĺíŕăŕ ďđűíňýđó lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Äë˙ íŕńňđîéęi ŕääŕëĺíŕé ÷ŕđăi äđóęó âŕě ďŕňđýáíŕ\n"
-"ďŕçíŕ÷űöü iě˙ ŕääŕëĺíŕăŕ ńĺđâĺđŕ i iě˙ ÷ŕđăi äđóęó,\n"
-"ó ˙ęóţ ŕääŕëĺíű ńĺđâĺđ áóäçĺ ŕäďđŕ˘ë˙öü çŕäŕííi."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Ŕääŕëĺíű âóçĺë"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Ŕääŕëĺíű âóçĺë"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Ŕääŕëĺíű âóçĺë"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Îďöűi ďđűíňýđó SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Äë˙ äđóęó íŕ ďđűíňýđű SMB íĺŕáőîäíŕ ďŕçíŕ÷űöü iě˙ őîńňó SMB (íĺ çŕ˘ń¸äű "
-"ńóďŕäŕĺ ç iěĺíĺě ó ńĺňöű TCP/IP) i ŕäđŕń IP ńĺđâĺđŕ äđóęó, ŕ ňŕęńŕěŕ iě˙ "
-"đýńóđńó, ˙ęi ńďŕëó÷ŕíű ç âűáđŕíűě ďđűíňýđŕě, iě˙ ęŕđűńňŕëüíięó, ďŕđîëü i "
-"iíôŕđěŕöűţ ŕá ďđŕöî˘íŕé ăđóďĺ."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Iě˙ ńĺđâĺđó SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP ńĺđâĺđŕ SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Iě˙ äë˙ đŕçěĺđęŕâŕíŕăŕ đýńóđńó"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Ďđŕöî˘íŕ˙ ăđóďŕ"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Îďöűi ďđűíňýđó NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Äë˙ äđóęó íŕ ďđűíňýđű NetWare íĺŕáőîäíŕ ďŕçíŕ÷űöü iě˙ ńĺđâĺđó äđóęó NetWare "
-"(íĺ çŕ˘ń¸äű ńóďŕäŕĺ ç iěĺíĺě ó ńĺňöű TCP/IP) i iě˙ ÷ŕđăi äđóęó, ˙ęŕ˙ "
-"ŕäďŕâ˙äŕĺ ŕáđŕíŕěó ďđűíňýđó, ŕ ňŕęńŕěŕ iě˙ ęŕđűńňŕëüíięó i ďŕđîëü."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Ńĺđâĺđ äđóęó"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Iě˙ ÷ŕđăi äđóęó"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Îďöűi ńîęĺňó ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Ęŕá äđóęŕâŕöü ďđŕç ńîęĺň äđóęŕđęi, âŕě íĺŕáőîäíŕ çŕá˙ńďĺ÷űöü\n"
-"iě˙ ďđűíňýđó i ěŕă÷űěŕ ˙ăî íóěŕđ ďîđňó."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Iě˙ ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Iě˙ ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Iě˙ äđóęŕđęi"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Ŕďińŕííĺ"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Đŕçěĺđęŕâŕííĺ"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "×űňŕţ áŕçó äŕäçĺíűő äđŕéâĺđî˘ CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Ăýňŕ äŕęëŕäíŕ?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Çëó÷ýííĺ ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "ßęi ňűď äđóęŕđęi âű ěŕĺöĺ?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Íŕńňđîéęŕ çëó÷ýíí˙ ç Iíňýđíýňŕě"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Íŕńňđîéęŕ çëó÷ýíí˙ ç Iíňýđíýňŕě"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü äđóę?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Ďđŕâĺđęŕ ďŕđňî˘"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Ňŕę, íŕäđóęŕâŕöü ŕáĺäçâĺ ńňŕđîíęi ňýęńňó"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ńňŕíäŕđňíű"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Äđóę ňýńňŕâűő ńňŕđîíŕę"
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Äđóę ňýńňŕâűő ńňŕđîíŕę"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Äđóę ňýńňŕâűő ńňŕđîíŕę"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Äđóę ňýńňŕâűő ńňŕđîíŕę"
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Ňýńňŕâű˙ ńňŕđîíęi ŕäďđŕ˘ëĺíű äýěŕíó äđóęó.\n"
-"Ďĺđŕä ňűě, ˙ę ďđűíňýđ çŕďđŕöóĺ, ěîćŕ ďđŕéńöi ďý˘íű ÷ŕń.\n"
-"Ńňŕňóń äđóęó:\n"
-"%s\n"
-"\n"
-"¨í ďđŕöóĺ íŕđěŕëüíŕ?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Ňýńňŕâű˙ ńňŕđîíęi ŕäďđŕ˘ëĺíű äýěŕíó äđóęó.\n"
-"Ďĺđŕä ňűě, ˙ę ďđűíňýđ çŕďđŕöóĺ, ěîćŕ ďđŕéńöi ďý˘íű ÷ŕń.\n"
-"¨í ďđŕöóĺ íŕđěŕëüíŕ?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Iě˙ äđóęŕđęi"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Ďîđň ěűřű"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ŕäëó÷ýííĺ ŕä ńĺňęi"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ŕäëó÷ýííĺ ŕä ńĺňęi"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Îďöűi ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "×űňŕţ áŕçó äŕäçĺíűő äđŕéâĺđî˘ CUPS"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Íŕńňđîéęŕ çëó÷ýíí˙ ç Iíňýđíýňŕě"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Iě˙ äđóęŕđęi"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "×űňŕţ áŕçó äŕäçĺíűő äđŕéâĺđî˘ CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Íŕńňđîéęŕ ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "ßęi ňűď âŕřŕăŕ ISDN çëó÷ýíí˙?"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Íŕńňđîéęŕ ńĺňęi"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ěŕíiňîđ ďŕęóëü íĺ íŕńňđîĺíű"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Íŕńňđîéęŕ ńĺňęi"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "ßęóţ ńińňýěó äđóęó Âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Âűńîęi"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Ďŕđŕíŕiäŕëüíű"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "ßęóţ ńińňýěó äđóęó Âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Âűáŕđ ňűďó çëó÷ýíí˙ ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ßęóţ ńińňýěó äđóęó Âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Íŕńňđîéęŕ ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Óńňŕë˙âŕííĺ ďŕęĺňó %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Îďöűi ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "×űňŕţ áŕçó äŕäçĺíűő äđŕéâĺđî˘ CUPS"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Íŕńňđîéęŕ ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Ćŕäŕĺöĺ íŕńňđîiöü ďđűíňýđ?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Ňóň çě˙ř÷ŕţööŕ ÷ýđăi äđóęó.\n"
-"Âű ěîćŕöĺ äŕäŕöü ˙ř÷ý, ŕëüáî çě˙íiöü ińíóţ÷ű˙."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Ňóň çě˙ř÷ŕţööŕ ÷ýđăi äđóęó.\n"
-"Âű ěîćŕöĺ äŕäŕöü ˙ř÷ý, ŕëüáî çě˙íiöü ińíóţ÷ű˙."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Íŕńňđîéęŕ ńĺňęi"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Çâű÷ŕéíű"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Íŕńňđîéęŕ çëó÷ýíí˙ ç Iíňýđíýňŕě"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Çëó÷ýííĺ ďđűíňýđó"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Äđóę ňýńňŕâűő ńňŕđîíŕę"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "×űňŕţ áŕçó äŕäçĺíűő äđŕéâĺđî˘ CUPS"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Ëŕęŕëüíű ďđűíňýđ"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "×űňŕţ áŕçó äŕäçĺíűő äđŕéâĺđî˘ CUPS"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Íŕńňđîéęŕ proxy ęýřóţ÷űő ńĺđâĺđŕ˘"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Ďîđň"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Proxy ďŕâiíĺí áűöü http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Proxy ďŕâiíĺí áűöü ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Ŕ˘ňŕěŕňű÷íű ˘âŕőîä ó ńińňýěó"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Ďŕđîëü"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Í˙ěŕ ďŕđîëţ"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Ďŕđîëi íĺ ńóďŕäŕţöü"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Íĺ ŕňđűěëiâŕĺööŕ äŕäŕöü đŕçäçĺë íŕ _ŕäôŕđěŕöiđŕâŕíű_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Íĺ ŕňđűěëiâŕĺööŕ çŕďiń ó ôŕéë %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid íĺ ďđŕöŕçäîëüíű"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid íĺ ďđŕöŕçäîëüíű (ěîćŕ raid ďđűëŕäű ŕäńóňíi÷ŕţöü?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Íĺäŕńňŕňęîâŕ đŕçäçĺëࢠäë˙ RAID óçđî˘í˙ %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ďĺđű˙äű÷íű ęŕěŕíäíű ďëŕíŕâŕëüíię."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"ampd âűęŕđűńňî˘âŕĺööŕ äë˙ ŕäńëĺćâŕíí˙ ńňŕňóńó áŕňŕđýi i â˙äçĺíí˙ "
-"ńňŕňűńňűęi.\n"
-"ßăî ěîćíŕ âűęŕđűńňî˘âŕöü äë˙ âűęëţ÷ýíí˙ ěŕřűíű ďđű íiçęiě çŕđŕäçĺ áŕňŕđýi."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ęŕěŕíäű, ˙ęi˙ âűęîíâŕţööŕ, ôięńóţööŕ ďŕ ęŕěŕíäçĺ i ÷ŕńĺ ˙ĺ âűęŕíŕíí˙\n"
-"i âűęîíâŕţööŕ ăđóďű ęŕěŕíä, ęŕëi çŕăđóçęŕ ďŕě˙öi íićýé äŕńňŕňęîâŕé."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron - ńňŕíäŕđňíŕ˙ UNIX ďđŕăđŕěŕ, ˙ęŕ˙ âűęîíâŕĺ ďđŕăđŕěű ęŕđűńňŕëüíięŕ\n"
-"ďđŕç ďŕçíŕ÷ŕíű˙ ďĺđű˙äű ÷ŕńó. Vixie cron äŕäŕĺ đŕä äŕďŕ˘íĺíí˙˘ äŕ "
-"ńňŕíäŕđňíŕăŕ\n"
-"UNIX cron, óęëţ÷ŕţ÷ű ëĺďřű ˘çđîâĺíü á˙ńďĺęi i ěîöíű˙ ęŕíôiăóđŕöűéíű˙ îďöűi."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM äŕäŕĺ ďŕäňđűěęó ěűřű äŕ ďđŕăđŕěŕ˘, ˙ęi˙ ďđŕöóţöü ó ňýęńňŕâűě đýćűěĺ,\n"
-"ňŕęiő ˙ę Midnight Commander. Ăýňŕ äŕçâŕë˙ĺ âűęŕđűńňî˘âŕöü ěűř ďđű "
-"ęŕďiđŕâŕííi i ˘ńňŕ˘öű,\n"
-"i ˘ęëţ÷ŕĺ ďŕäňđűěęó ˘ńďëűâŕţ÷űő (pop-up) ěĺíţ ˘ ňýęńňŕâűě đýćűěĺ."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache - ăýňŕ World Wide Web ńĺđâĺđ. ¨í âűęŕđűńňî˘çâŕĺöŕ äë˙ ŕáńëóăî˘âŕíí˙\n"
-"HTML ôŕéëࢠi CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Iíňýđíýň ńóďĺđńĺđâĺđ-äýěŕí (çŕâĺööŕ inetd) çŕďóńęŕĺ ďđű ńňŕđöĺ \n"
-"ęîëüęŕńöü đîçíűő iíňýđíýň ńëóćáŕ˘, ˙ęi˙ íĺŕáőîäíű. ßăî ěîćíŕ âűęŕđűńňî˘âŕöü "
-"äë˙ ďóńęó\n"
-"řěŕňëłęłő ńëóćáŕ˘, óęëţ÷ŕţ÷ű telnet, ftp, rsh i rlogin. Áëŕęóţ÷ű inetd, "
-"áëŕęóĺě\n"
-"óńĺ ńëóćáű, çŕ ˙ęi˙ ¸í ŕäęŕçâŕĺ."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ăýňű ďŕęĺň çŕăđóćŕĺ ŕáđŕíóţ đŕńęëŕäęó ęëŕâi˙ňóđű ˙ę íŕáîđ ç\n"
-"/etc/sysconfig/keyboard. ¨íŕ ěîćŕ áűöü ŕáđŕíŕ ňŕęńŕěŕ ç äŕďŕěîăŕé "
-"kbdconfig.\n"
-"Âű ěîćŕöĺ çđŕáiöü äŕńňóďíŕé ˙ĺ äë˙ řěŕňëłęłő ěŕřűíŕ˘."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd - ăýňű äýěŕí äđóęó, ďŕňđýáíű äë˙ ęŕđýęňíŕé ďđŕöű lpr. Ăýňŕ\n"
-"ńĺđâĺđ, ˙ęi ęiđóĺ ďđŕöŕé ďđűíňýđó(ŕ˘)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) - ăýňŕ ńĺđâĺđ äŕěĺííűő iě¸íŕ˘, ˙ęi âűęŕđűńňî˘âŕĺööŕ äë˙\n"
-"ďĺđŕęëŕäŕíí˙ iě¸í âóçëî˘ ó IP ŕäđŕńű."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ěŕíöiđŕâŕöü i đŕçěŕíöiđŕâŕöü óńĺ ńĺňęŕâű˙ ôŕéëŕâű˙ ńińňýěű (NFS),\n"
-" SMB (Lan Manager/Windows) i NCP (Netware) ďóíęňű ěŕíöiđŕâŕíí˙."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ŕęňűâiçŕâŕöü/äýŕęňűâiçŕâŕöü óńĺ ńĺňęŕâű˙ iíňýđôĺéńű, ńęŕíôiăóđŕâŕíű˙ äë˙\n"
-"ńňŕđňó ďđű çŕăđóçöű ńińňýěű."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - ăýňŕ â˙äîěű ďđŕňŕęîë äë˙ äîńňóďó äŕ ôŕéëࢠďđŕç TCP/IP ńĺňęi.\n"
-"Ăýňŕ˙ ńëóćáŕ çŕá˙ńďĺ÷âŕĺööŕ NFS ńĺđâĺđŕě, ˙ęi ęŕíôiăóđűđóĺöŕ ďđŕç\n"
-"/etc/exports ôŕéë."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS - ăýňŕ â˙äîěű ďđŕňŕęîë äë˙ äîńňóďó äŕ ôŕéëࢠďđŕç TCP/IP\n"
-"ńĺňęi. Ăýňŕ˙ ńëóćáŕ ˘ďëűâŕĺ íŕ íŕ˙˘íŕńöü ńóâ˙çi ďŕěić NFS ôŕéëŕěi."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Ďŕäňđűěęŕ PCMCIA - ăýňŕ çâű÷ŕéíŕ ďŕäňđűěęŕ ňŕęiő đý÷ŕ˘, ˙ę Ethernet i\n"
-"ěŕäýěű ˘ íŕ˘ňáóęŕő. Âŕě í˙ěŕ íĺŕáőîäíŕńöi ęŕíôiăóđŕâŕöü iő, ęŕëi íŕ âŕřŕé\n"
-"ěŕřűíĺ iő í˙ěŕ, öi ˙íŕ íĺ íŕ˘ňáóę."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper (ŕăë˙äŕëüíię ďŕđňî˘) ęiđóĺ RPC çëó÷ýíí˙ěi, ˙ęi˙ çâű÷ŕéíŕ\n"
-"âűęŕđűńňî˘âŕţööŕ ňŕęiěi ďđŕňŕęîëŕěi ˙ę NFS i NIS. Portmap ńĺđâĺđ ďŕâiíĺí "
-"âűęîíâŕööŕ\n"
-"íŕ ěŕřűíŕő ˙ęi˙ ďđŕöóţöü ˙ę ńĺđâĺđű äë˙ ďđŕňŕęîëŕ˘, ˙ęi˙ ńęŕđűńňî˘âŕţöü RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix - ăýňŕ ďŕřňîâű ňđŕíńďŕđňíű ŕăĺíň, ďđŕăđŕěŕ, ˙ęŕ˙\n"
-"ďĺđŕě˙ř÷ŕĺ ďîřňó ç ŕäíîé ěŕřűíű íŕ éířóţ."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Çŕőŕâŕöü i ŕäíŕâiöü ńińňýěíű ýíňđŕďiéíű ďóë äë˙ âűńîęŕé ˙ęŕńöi\n"
-"ăĺíĺđŕöűł âűďŕäęîâűő ëłęŕ˘."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Äýěŕí ěŕđřđóňűçŕöűi äŕçâŕë˙ĺ äűíŕěi÷íűě ňŕáëiöŕě IP ěŕđřđóňűçŕöűi\n"
-"ŕäíŕ˘ë˙ööŕ ďđŕç RIP ďđŕňŕęîë. RIP âűęŕđűńňî˘âŕĺööŕ ˘ ěŕëűő ńĺňęŕő, áîëüř\n"
-"ńęëŕäŕíű˙ ďđŕňŕęîëű ěŕđřđóňűçŕöűi - ó â˙ëięiő ńĺňęŕő."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ďđŕňŕęîë rstat äŕçâŕë˙ĺ ęŕđűńňŕëüíięŕě ńĺňęi ŕňđűěëiâŕöü\n"
-"ďŕěĺđű íŕăđóçęi äë˙ ęîćíŕé ěŕřűíű ńĺňęi."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ďđŕňŕęîë rusers äŕçâŕë˙ĺ ęŕđűńňŕëüíięŕě ńĺňęi âűçíŕ÷ŕöü, őňî\n"
-"˘âŕéřî˘ i ďđŕöóĺ íŕ ěŕřűíŕő ˘ ńĺňöű."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Ďđŕňŕęîë rwho äŕĺ ěŕă÷űěŕńöü ęŕđűńňŕëüíięŕě ŕňđűěŕöü ńďiń ˘ńiő\n"
-"ęŕđűńňŕëüíięŕ˘, óâŕéřî˘řűő íŕ ěŕřűíó, âűęŕíࢠrwho äýěŕí (ďŕäîáíű íŕ finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog - ăýňŕ ńđîäŕę, ç äŕďŕěîăŕé ˙ęîăŕ ěíîăi˙ äýěŕíű çŕďińâŕţöü "
-"ďŕâĺäŕěëĺííi\n"
-"˘ đîçíű˙ ôŕéëű ńňŕňűńňűęi. Ăýňŕ âĺëüěi äîáđŕ äë˙ ŕăë˙äó ďđŕöű đîçíűő ńëóćáŕ˘."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Çŕďóńęŕĺ i ďđűďűí˙ĺ X Font Server ďđű çŕăđóçöű i âűęëţ÷ýííi."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Ŕá˙đűöĺ, ˙ęi˙ ńĺđâińű çŕďóńęŕöü ŕ˘ňŕěŕňű÷íŕ ďđű çŕăđóçöű"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Ďđűíňýđ"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "öięŕâŕ"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Îďöűi ŕääŕëĺíŕăŕ ďđűíňýđó lpd"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Ńĺđâĺđ äđóęó"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ďđűëŕäŕ"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Óâŕăŕ!"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Äŕëó÷űöü"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Ńňŕđňŕâŕĺ ěĺíţ"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Ńĺęňŕđ"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Ďŕäęëţ÷ýííĺ"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Íŕńňđîéęŕ çëó÷ýíí˙ ç Iíňýđíýňŕě"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Ěóëüňűěĺäű˙ - Ăđŕôłęŕ"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "đŕńďđŕöî˘ř÷űę"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Äŕëó÷ýííĺ äŕ Iíňýđíýňó"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Ńĺňęŕâű iíňýđôĺéń"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Iě˙ ńĺđâĺđó SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Çŕáŕâű"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "ýęńďĺđň"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "ŕáŕâ˙çęîâŕ"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Óńňŕë˙âŕííĺ ďŕęĺňó %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ňŕáëiöŕ đŕçäçĺëࢠíĺ ÷űňŕĺööŕ, ˙íŕ çŕíŕäňŕ ńŕďńŕâŕíŕ äë˙ ěĺí˙ :(\n"
-"Ďŕńďđŕáóţ ińöi äŕëĺé i áóäó ďđŕďóńęŕöü äđýííű˙ đŕçäçĺëű"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Ďŕěűëęŕ"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Íŕńňđîéęŕ ďŕńë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Íŕńňđîéęŕ ěŕäýěó"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Ďđűěłöĺ âiířŕâŕííi!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Óńňŕ븢ęŕ"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Äŕäŕöü ęŕđűńňŕëüíięŕ"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Ôŕđěŕňŕâŕííĺ âiđňóŕëüíŕăŕ đŕçäçĺëó %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Âűáŕđ ăđóďű ďŕęĺňŕ˘"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Âűáŕđ ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Âűäŕëiöü ÷ŕđăó äđóęó"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Âűäŕëiöü Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Iě˙ ęŕđűńňŕëüíięó:"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Ęŕëł ëŕńęŕ, çđŕáłöĺ íĺęŕëüęł đóőࢠěűřřó."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Ďŕńďđŕáóéöĺ ˙ř÷ý đŕç"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Ďŕńďđŕáóéöĺ ˙ř÷ý đŕç"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Í˙ěŕ ďŕđîëţ"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Đŕçěĺđęŕâŕííĺ"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Âűáŕđ ňűďó çëó÷ýíí˙ ďđűíňýđó"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ňűď ęëŕâi˙ňóđű."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Íŕöłńíłöĺ íŕ đŕçäçĺë"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Âűáŕđ ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Ęŕëł ëŕńęŕ, çđŕáłöĺ íĺęŕëüęł đóőࢠěűřřó."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Ńĺňęŕ:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Iě˙ ęŕđűńňŕëüíięó:"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Âűáŕđ ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ěîâó äë˙ ęŕđűńňŕíí˙."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Âűęŕđűńňî˘âŕöü ŕďňűěiçŕöűţ ćîđńňęŕăŕ äűńęó?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Âűęŕđűńňî˘âŕöü ŕďňűěiçŕöűţ ćîđńňęŕăŕ äűńęó?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "×ŕęŕéöĺ"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Ç ęîëŕě"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Ç ęîëŕě"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Îďöűi ěîäóëţ:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Âűáŕđ ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "Ńĺňęŕ:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Âűáŕđ ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Íŕńňđ. ôŕéëŕâűő ńińňýěŕ˘"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Îďöűi"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Äŕ ˙ęîăŕ ďŕńë˙äî˘íŕăŕ ďîđňó äŕëó÷ŕíű ěŕäýě?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ ňűď âŕřŕé ěűřű."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Ŕäíŕ˘ëĺííĺ ç äűńęĺňű"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ ňűď âŕřŕé ěűřű."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "˛ířű˙"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Óńňŕë˙âŕííĺ ńińňýěű"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Ŕäíŕ˘ëĺííĺ ç ôŕéëó"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Ŕäíŕ˘ëĺííĺ ç ôŕéëó"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Ďŕ âűáŕđó"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Ńňŕđňŕâŕĺ ěĺíţ"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Ŕäíŕ˘ëĺííĺ ç ôŕéëó"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Ňýęńň"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Âűáŕđ ďŕęĺňŕ˘"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ěîâó äë˙ ęŕđűńňŕíí˙."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ěîâó äë˙ ęŕđűńňŕíí˙."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ěîâó äë˙ ęŕđűńňŕíí˙."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Çŕőŕâŕííĺ ˘ ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Ęŕëł ëŕńęŕ, çđŕáłöĺ íĺęŕëüęł đóőࢠěűřřó."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Âűáŕđ ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Íŕńňđîéęŕ"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Çŕęŕí÷ýííĺ íŕńňđîéęi"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Íŕńňđ. ôŕéëŕâűő ńińňýěŕ˘"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Óńňŕë˙âŕííĺ %s íĺ ŕňđűěŕëŕń˙. Óçíięëŕ íŕńňóďíŕ˙ ďŕěűëęŕ:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "Íĺ çíŕéřëi %s"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Çđîáëĺíŕ"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Ôŕđěŕňŕâŕöü äűńęĺňó"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ďŕäđűőňî˘ęŕ ˘ńňŕë˙âŕíüí˙"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "ŕáěĺćŕâŕííĺ"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ŕáěĺćŕâŕííĺ"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Ôŕđěŕňŕâŕííĺ đŕçäçĺëŕ˘"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Âűäŕëĺííĺ âűáđŕíűő RPM-ďŕęĺňࢠç ńińňýěű"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Çŕęŕí÷ýííĺ íŕńňđîéęi"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Ęđîďęŕ ěŕíöiđŕâŕíí˙"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Âűáŕđ đŕçäçĺëࢠäë˙ ôŕđěŕňŕâŕíí˙"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "äîáđŕ"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Ŕäě˙íiöü"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Ďđűíňýđ"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Óńňŕë˙âŕííĺ ńińňýěű"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Ŕá˙đűöĺ ôŕéë"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Ó âŕřŕé ńłńňýěĺ í˙ěŕ íiâîäíŕăŕ ńĺňęŕâŕăŕ ŕäŕďňŕđŕ!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Óńňŕ븢ęŕ"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Ó âŕřŕé ńłńňýěĺ í˙ěŕ íiâîäíŕăŕ ńĺňęŕâŕăŕ ŕäŕďňŕđŕ!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Çŕęŕí÷ýííĺ ˘ńňŕë˙âŕíí˙"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ çŕđŕç ěŕă÷űěŕ"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-#, fuzzy
-msgid "disable"
-msgstr "Ňŕáëiöŕ"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "reconfigure"
-msgstr "Íŕńňđîéęŕ X Window"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Âűçíŕ÷ýííĺ ďđűëŕäŕ˘..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ çŕđŕç çŕáŕđîíĺíŕ"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ çŕđŕç çŕáŕđîíĺíŕ"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-#, fuzzy
-msgid "enable"
-msgstr "Ňŕáëiöŕ"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ çŕđŕç ěŕă÷űěŕ"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Âŕř ęŕěď'ţňŕđ ěîćŕ áűöü ńęŕíôłăóđŕâŕíű íŕ ńóěĺńíŕĺ âűęŕđűńňŕííĺ\n"
-" ˛íňýđíýňó (Internet Connection Sharing)?\n"
-"\n"
-"Çŕ˘âŕăŕ: âŕě ďŕňđýáíű ńĺňęŕâű ŕäŕďňŕđ äë˙ ďŕäęëţ÷ýíí˙ äŕ ËÂŃ.\n"
-"\n"
-"Âű ćŕäŕĺöĺ óńňŕë˙âŕöü ńóěĺńíű äîńňóď äŕ Internet?"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Ńĺňęŕâű iíňýđôĺéń"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ó âŕřŕé ńłńňýěĺ í˙ěŕ íiâîäíŕăŕ ńĺňęŕâŕăŕ ŕäŕďňŕđŕ!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Íi âîäíű ethernet ńĺňęŕâű ŕäŕďňŕđ ó âŕřŕé ńińňýěĺ íĺ âűçíŕ÷ŕíű. Ęŕëi ëŕńęŕ, "
-"ńęŕđűńňŕéöĺ ęŕíôiăóđŕöűéíű iíńňđóěýíň."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Ńĺňęŕâű iíňýđôĺéń"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ńĺňęŕâű ŕäŕďňŕđ, ˙ęł áóäçĺ âűęŕđűńňŕíű äë˙ äŕëó÷ýíí˙ äŕ "
-"âŕřŕé ëŕęŕëüíŕé ńĺňęi."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Ěŕíiňîđ ďŕęóëü íĺ íŕńňđîĺíű"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Íŕńňđîéęŕ ěŕäýěó"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Íŕńňđîéęŕ çëó÷ýíí˙ ç Iíňýđíýňŕě"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP ńĺđâĺđŕ SMB"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ďŕňýíöűéíű ŕäđŕń ËÂŃ ęŕíôëięňóĺ ç á˙ăó÷ŕé ęŕíôiăóđŕöű˙é %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Çíîéäçĺíŕ ńłńňýěŕ ńĺňęŕâŕé á˙ńďĺęł (firewall)!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Óâŕăŕ! Çíîéäçĺíŕ łńíóţ÷ŕ˙ ńińňýěŕ ńĺňęŕâŕé á˙ńďĺęi (firewall). Âŕě ěŕă÷űěŕ "
-"ńďŕňđýáłööŕ ńęŕđýęňŕâŕöü ˙ĺ ďŕńë˙ ˘ńňŕë˙âŕíí˙."
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Íŕńňđîéęŕ IDE"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ęŕíôłăóđŕöű˙ ńöýíŕđŕ˘, óńňŕë˙âŕííĺ ĎÇ, çŕďóńę ńëóćáŕ˘..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Ďđŕáëĺěű ç óńňŕë˙âŕííĺě ďŕęĺňó %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Óńĺ ŕäęŕíôłăóđŕâŕíŕ.\n"
-"Çŕđŕç âű ěîćŕöĺ ńóěĺńíŕ âűęŕđűńňî˘âŕöü ďŕäęëţ÷ýííĺ äŕ Internet\n"
-"ç łířűěł ęŕěď'ţňýđŕěł ˘ âŕřŕé ËÂŃ, ęŕđűńňŕţ÷űń˙ ŕ˘ňŕěŕňű÷íűě\n"
-"ęŕíôłăóđŕâŕííĺě (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ çŕđŕç ěŕă÷űěŕ"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Iíňýđíýň çëó÷ýííĺ i ęŕíôiăóđŕöű˙"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Ńóěĺńíŕĺ Iíňýđíýň-çëó÷ýííĺ"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "ďŕěűëęŕ ěŕíöiđŕâŕíí˙: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Iě˙ ěŕřűíű"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr ""
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Ňűď: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Řëţç:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Íŕńňđîéęŕ ńëóćáŕ˘"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Íŕńňđîéęŕ ADSL"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "ńĺđâĺđ"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Ńĺňęŕâű iíňýđôĺéń"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Ńňŕđňŕâŕĺ ěĺíţ"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Íŕńňđîéęŕ ëŕęŕëüíŕé ńĺňęi"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Ěŕéńňŕđ ńňâŕđýíí˙..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Ďđŕâĺđęŕ ďŕđŕěĺňđࢠíŕńňđîéęi"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Iě˙ çëó÷ýíí˙"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Đŕçěĺđęŕâŕííĺ"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Íŕńňđîéęŕ"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Ŕęňű˘íű"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Ŕęňű˘íű"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Iíňýđíýň çëó÷ýííĺ i ęŕíôiăóđŕöű˙"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Iíňýđíýň çëó÷ýííĺ i ęŕíôiăóđŕöű˙"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Iě˙ çëó÷ýíí˙"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Řëţç"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Íŕńňđîéęi ˘çđî˘í˙ á˙ńďĺęi"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Äŕëó÷ýííĺ äŕ Iíňýđíýňó"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Ŕá˙đűöĺ iíńňđóěĺíň, ˙ęi ćŕäŕĺöĺ ńęŕđűńňŕöü"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Ęŕíŕäńęi (Ęâĺáýę)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Ţđîďŕ"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Ińëŕíäńęi"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Ţđîďŕ"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "ďŕńë˙äî˘íŕ˙"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ňűď ęëŕâi˙ňóđű."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Âű ćŕäŕĺöĺ ęŕá BackSpace ďđŕöŕâࢠó ęŕíńîëł ˙ę Delete?"
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "Çě˙íiöü ďŕěĺđű ýęđŕíó"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Çě˙íiöĺ âŕř Cd-Rom!\n"
-"\n"
-"Ęŕëi ëŕńęŕ, óńňŕ˘öĺ Cd-Rom, ďŕçíŕ÷ŕíű \"%s\", ó âŕř äűńęŕâîä i íŕöińíiöĺ Oę "
-"ďŕńë˙.\n"
-"Ęŕëi âű íĺ ěŕĺöĺ ˙ăî, íŕöińíiöĺ Ŕäě˙íiöü, ęŕá ŕäě˙íiöü óńňŕë˙âŕííĺ ç ăýňŕăŕ "
-"Cd."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Íĺěŕă÷űěŕ çŕďóńöłöü live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Iě˙ ęŕđűńňŕëüíięó:"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Ďđŕâĺđęŕ ďŕđňî˘"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Íŕńňđîéęŕ ADSL"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "öĺíü"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ďđűëŕäŕ"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "ôŕđěŕňŕâŕííĺ"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Íŕńňđîéęŕ"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ ňűď âŕřŕé ěűřű."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb íĺ çíîéäçĺí\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Ýěóë˙âŕöü ňđýöţţ ęíîďęó?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Ŕá˙đűöĺ âiäýŕęŕđňó"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Çŕăđóçŕ÷íŕ˙ ďđűëŕäŕ"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "Çíîéäçĺíŕ ńłńňýěŕ ńĺňęŕâŕé á˙ńďĺęł (firewall)!"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "Çíîéäçĺíŕ ńłńňýěŕ ńĺňęŕâŕé á˙ńďĺęł (firewall)!"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Âűáŕđ ěîâű"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Ęëŕń óńňŕë˙âŕíí˙"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Âűçíŕ÷ýííĺ ćîđńňęŕăŕ äűńęó"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Íŕńňđîéęŕ ěűřű"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Âűáŕđ ęëŕâi˙ňóđű"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "ęó÷ŕđŕâű"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Íŕńňđ. ôŕéëŕâűő ńińňýěŕ˘"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ôŕđěŕňŕâŕííĺ đŕçäçĺëŕ˘"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Âűáŕđ ďŕęĺňŕ˘"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Óńňŕë˙âŕííĺ ńińňýěű"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Äŕäŕöü ęŕđűńňŕëüíięŕ"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Íŕńňđîéęŕ ńĺňęi"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Íŕńňđîéęŕ ńëóćáŕ˘"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Óńňŕë˙âŕííĺ çŕăđóç÷űęó"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Ńňâŕđűöü çŕăđ. äűńę"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Íŕńňđîéęŕ X Window"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Óńňŕë˙âŕííĺ ńińňýěű"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Çŕęŕí÷ýííĺ ˘ńňŕë˙âŕíí˙"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ďŕěűëęŕ ŕäęđűöö˙ %s äë˙ çŕďińó: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Ďŕäđűőňî˘ęŕ ˘ńňŕë˙âŕíüí˙"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Ńĺňęŕâű ďđűíňýđ (socket)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office"
-msgstr "äîáđŕ"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Íŕâóęîâű˙ ďđűęëŕäŕííł"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "˛íńňđóěĺíňŕëüíű˙ ńđîäęł äë˙ Palm Pilot ł Visor"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "Íŕâóęîâű˙ ďđűęëŕäŕííł"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Îôłńíű˙ ďđŕăđŕěű: ďđŕöýńŕđű ńëîâࢠ(kword, abiword), ýëĺęňđîíű˙ ňŕáëłöű, "
-"ŕăë˙äŕëüíłęł pdf-ôŕéëŕ˘, ł ă.ä."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ŕ˘äű¸ńđîäęł: ďđŕéăđŕâŕëüíłęł mp3 ł midi, ěłęřŕđű ł ă.ä."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "íłăł ł Howto ďŕ Linux ł Free Software"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Íŕâóęîâű˙ ďđűęëŕäŕííł"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Ěóëüňűěĺäű˙ - âłäýŕ"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Íŕáîđ łíńňđóěĺíňࢠäë˙ ďîřňű, íŕâłíŕ˘, web'ó, ďĺđŕäŕ÷ű ôŕéëŕ˘, ł chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Ěóëüňűěĺäű˙ - ăóę"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Óöłëłňű"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "Ŕ˘ňýíňűôięŕöű˙"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ęŕíńîëüíű˙ łíńňđóěĺíňŕëüíű˙ ńđîäęł"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Íŕńňđîéęŕ çëó÷ýíí˙ ç Iíňýđíýňŕě"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Ěóëüňűěĺäű˙ - ăóę"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Íŕńňđîéęŕ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Řěŕň ăđŕôł÷íűő ěýíŕäćýđࢠĎđŕöî˘íűő ńňŕëî˘(Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment - ŕńíî˘íŕĺ ăđŕôł÷íŕĺ ŕń˙đîäçĺ ç ęŕëĺęöű˙é "
-"łíńňđóěĺíňŕëüíűő ńđîäęŕ˘"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "˛íńňđóěĺíňŕëüíű˙ ńđîäęł ńňâŕđýíüí˙ CD"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Íŕâóęîâű˙ ďđűęëŕäŕííł"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Server"
-msgstr "ńĺđâĺđ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Ăđŕôł÷íű˙ ďđŕăđŕěű ňűďó The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Áłáëł˙ňýęł ł ďđŕăđŕěű äë˙ đŕńďđŕöî˘ęł íŕ Ń ł Ń++"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Ńĺňęŕâű ďđűíňýđ (socket)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Ěóëüňűěĺäű˙ - ăóę"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Đýäŕęňŕđű ł ďđŕéăđŕâŕëüíłęł âłäýŕ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Ěóëüňűěĺäű˙ - Ăđŕôłęŕ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Çŕáŕ˘ë˙ëüíű˙ ďđŕăđŕěű: ŕđęŕäű, ńňđŕňýăłł ł ă.ä."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Ďđűęëŕäŕííł äë˙ ÷űňŕíí˙ ł ŕäďđŕ˘ęł ďîřňű ł íŕâłíࢠ(pine, mutt, tin...), "
-"Web ŕăë˙äŕëüíłęł"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Ŕđőłâŕňŕđű, ýěóë˙ňŕđű, ěŕíłňîđűíă"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Ďĺđńŕíŕëüíű˙ ôłíŕíńű"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Ăđŕôł÷íŕĺ ŕń˙đîäçĺ ńŕ çđó÷íűě äçĺë˙ âűęŕđűńňŕíí˙ íŕáîđŕě ďđűęëŕäŕíí˙˘ ł "
-"łíńňđóěĺíňŕëüíűő ńđîäęŕ˘"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Íŕńňđîéęŕ çëó÷ýíí˙ ç Iíňýđíýňŕě"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Đýäŕęňŕđű ł ďđŕéăđŕâŕëüíłęł ăóęó ł âłäýŕ"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "˛ířű˙ ăđŕôł÷íű˙ Ďđŕöî˘íű˙ ńňŕëű"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Đýäŕęňŕđű, ŕáŕëîíęł, ňýđěłíŕëű"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Ďđŕăđŕěű ęłđŕâŕíí˙ âŕřűěł ôłíŕíńŕěł, ňűďó gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Ěýíŕäćŕđ ŕńŕáłńňŕé łíôŕđěŕöűł"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Ěóëüňűěĺäű˙ - Ńňâŕđýííĺ CD"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Íŕâóęîâű˙ ďđűęëŕäŕííł"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Ŕäě˙íiöü"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Í˙ěŕ"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Ŕá˙đűöĺ ŕńíî˘íŕăŕ ęŕđűńňŕëüíięŕ:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Ŕääŕëĺíű ďđűíňýđ"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Âű íĺ ěîćŕöĺ çŕäŕöü îďöűi ěîäóëţ %s."
-
-#~ msgid "mount failed"
-#~ msgstr "ďŕěűëęŕ ěŕíöiđŕâŕíí˙"
-
-#~ msgid "Low"
-#~ msgstr "Ńëŕáű"
-
-#~ msgid "Medium"
-#~ msgstr "Ń˙đýäíi"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Ăýňű óçđîâĺíü á˙ńďĺęi ěŕĺ řýđŕă ďŕë˙ďřýíí˙˘, ó ďĺđřóţ ÷ŕđăó\n"
-#~ "ďŕâ˙ëi÷űëŕń˙ ęîëüęŕńöü ďđŕâĺđŕę i ďŕď˙đýäćŕíí˙˘."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Ěóëüňűěĺäű˙"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Ýęńďĺđň"
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Äŕëó÷ýííĺ äŕ Iíňýđíýňó"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Äŕëó÷ýííĺ äŕ Iíňýđíýňó"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Íŕ ˙ęi äűńę ďĺđŕíĺńöł?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Âűáŕđ ďŕęĺňࢠäë˙ ˘ńňŕë˙âŕíí˙"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Iíôŕđěŕöű˙"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Íŕâóęîâű˙ ďđűęëŕäŕííł"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server. It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache - ăýňŕ World Wide Web ńĺđâĺđ. ¨í âűęŕđűńňî˘çâŕĺöŕ äë˙ "
-#~ "ŕáńëóăî˘âŕíí˙\n"
-#~ "HTML ôŕéëࢠi CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) - ăýňŕ ńĺđâĺđ äŕěĺííűő iě¸íŕ˘, ˙ęi âűęŕđűńňî˘âŕĺööŕ äë˙\n"
-#~ "ďĺđŕęëŕäŕíí˙ iě¸í âóçëî˘ ó IP ŕäđŕńű."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ ňűď âŕřŕé ěűřű."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Âűőŕä"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Ŕ˘ňŕěŕíöiđŕâŕííĺ çěĺííűő íŕçŕďŕřâŕëüíłęŕ˘"
-
-#~ msgid "Active"
-#~ msgstr "Ŕęňű˘íű"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Íĺ"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Ďđűíňýđ ěŕäýëi \"%s\" çíîéäçĺíű íŕ "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Ëŕęŕëüíű ďđűíňýđ"
-
-#~ msgid "Printer Device"
-#~ msgstr "Ďîđň ďđűíňýđó"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Ŕääŕëĺíű ńĺđâĺđ CUPS"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Ŕääŕëĺíű ńĺđâĺđ CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mouse Systems"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "˛ířű˙"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Ęŕëi ëŕńęŕ, ŕá˙đűöĺ ňűď ęëŕâi˙ňóđű."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Íŕöłńíłöĺ íŕ đŕçäçĺë"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Ňűď: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Äđýííű ôŕéë đýçĺđâîâŕé ęîďii"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Íŕńňđîéęŕ X Window"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Ďîđň ďđűíňýđó"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Ŕäěĺíŕ"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Îę"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Ďîđň ěűřű"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "Root"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "ßęi ňűď âŕřŕăŕ ISDN çëó÷ýíí˙?"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "ßęi ňűď âŕřŕăŕ ISDN çëó÷ýíí˙?"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "ßę âű ďëŕíóĺöĺ äŕëó÷űööŕ äŕ Iíňýđíýňó?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Ŕá˙đűöĺ ďŕćŕäŕíű ďŕěĺđ óńňŕë˙âŕíí˙"
-
-#~ msgid "Total size: "
-#~ msgstr "Ŕăóëüíű ďŕěĺđ: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Ďŕ÷ŕęŕéöĺ, ęŕëi ëŕńęŕ, "
-
-#~ msgid "Total time "
-#~ msgstr "Ŕăóëüíű ÷ŕń "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Âűęŕđűńňŕöü ińíóţ÷óţ íŕńňđîéęó äë˙ X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Äŕ ˙ęîăŕ ďîđňó äŕëó÷ŕíű âŕř ďđűíňýđ \n"
-#~ "(/dev/lp0 ýęâiâŕëĺíňíű LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Óâŕăŕ, ńĺňęŕâű ŕäŕďňŕđ ńęŕíôiăóđŕâŕíű.\n"
-#~ "Öi ćŕäŕĺöĺ ďĺđŕęŕíôiăóđŕâŕöü ˙ăî?"
-
-#~ msgid "New"
-#~ msgstr "Íîâű"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Çíiř÷űöü"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Íŕöłńíłöĺ íŕ đŕçäçĺë"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Íĺâűçíŕ÷ŕíŕńöü (%s), áóäçüöĺ äŕęëŕäíű˙\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (çěî˘÷ŕííĺ %s) "
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "Âŕř âűáŕđ? (çěî˘÷ŕííĺ %s. Óâ˙äçiöĺ `none' ďđű ŕäńóňíŕńöi) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Öi ćŕäŕĺöĺ ďđŕňýńöiđŕâŕöü íŕńňđîéęi?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Âű çăîäíű˙?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Ęŕëi âű íĺ âĺäŕĺöĺ äŕęëŕäíŕ, äűę çâű÷ŕéíűě âűáŕđŕě ç'˙˘ë˙ĺööŕ \"/dev/hda"
-#~ "\"\n"
-#~ "(ďĺđřŕńíű ěŕéńňŕđ IDE äűńę) öi \"/dev/sda\" (ďĺđřű SCSI äűńę)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Iě˙ çëó÷ýíí˙"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Ŕá˙đűöĺ ŕńíî˘íŕăŕ ęŕđűńňŕëüíięŕ:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Ęŕëł ëŕńęŕ, çđŕáłöĺ íĺęŕëüęł đóőࢠěűřřó."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Âű ďŕâłííű ďđűí˙öü óěîâű ëłöýíçłł, ęŕá ďđŕö˙ăíóöü óńňŕë˙âŕíüíĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł ëŕńęŕ, íŕöłńíłöĺ \"Ďđűí˙öü\", ęŕëł âű çăîäíű˙ ç óěîâŕěł ëłöýíçłł.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł ëŕńęŕ, íŕöłńíłöĺ \"Ŕäâĺđăíóöü\", ęŕëł âű íĺ çăîäíű˙ ç óěîâŕěł "
-#~ "ëłöĺíçłł.Óńňŕë˙âŕííĺ áóäçĺ ńęîí÷ŕíŕ\n"
-#~ "á˙ç çěĺíࢠâŕřŕé á˙ăó÷ŕé ęŕíôłăóđŕöűł."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Ŕá˙đűöĺ đŕńęëŕäęó ńâŕ¸é ęëŕâi˙ňóđű ç ďđűâĺäçĺíŕăŕ ńďińó"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Ęŕëł âű ćŕäŕĺöĺ ęŕá ďŕńë˙ ˘ńňŕë˙âŕíí˙ áűëł äŕńňóďíű łířű˙ ěîâű\n"
-#~ "(ŕęđŕě˙ ňîé, ˙ęóţ âű ˘ćî ŕáđŕëł íŕďŕ÷ŕňęó ˘ńňŕë˙âŕíí˙), ęŕëł "
-#~ "ëŕńęŕŕá˙đűöĺ\n"
-#~ "łő ç âűřýé ďđűâĺäçĺíŕăŕ ńďłńó. Ęŕëł âű ćŕäŕĺöĺ ŕáđŕöü óń¸ íŕöłńíłöĺ \"Óńĺ"
-#~ "\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Ŕá˙đűöĺ: \n"
-#~ "\n"
-#~ " - Ďŕ âűáŕđó: Ăýňű đýćűě đýęŕěĺíäóĺööŕ ˘ ňűě âűďŕäęó, ęŕëi âű "
-#~ "ďđŕöŕâŕëi \n"
-#~ " đŕíĺé ç GNU/Linux, i çěîćŕöĺ ńŕěi âűáđŕöü íĺŕáőîäíű˙\n"
-#~ " ďŕęĺňű i ŕáńňŕë˙âŕííĺ äë˙ âŕřŕăŕ ęŕěď'ţňŕđó. Ăë˙äçiöĺ íićýé "
-#~ "ďŕäđŕá˙çíŕńöł.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ýęńďĺđň: Âűáŕđ ăýňŕăŕ đýćűěó ńâĺä÷űöü, řňî âű ńâŕáîäíŕ âŕëîäŕĺöĺ GNU/"
-#~ "Linux\n"
-#~ " i ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü âĺëüěi äýňŕë¸âŕĺ Ąńňŕë˙âŕííĺ. ßę i ˘ "
-#~ "âűďŕäęó \n"
-#~ " \"Ďŕ âűáŕđó\"âŕě ďŕňđýáíŕ áóäçĺ âűáđŕöü íĺŕáőîäíű˙ ďđŕăđŕěű i \n"
-#~ " ŕáńňŕë˙âŕííĺ âŕřŕăŕ ęŕěďóňŕđó.\n"
-#~ " Ęŕëi ëŕńęŕ, ÍĹ ÂŰÁIĐŔÉÖĹ ĂÝŇŰ ĐÝĆŰĚ, ĘŔËI ÍĹ ĄĎÝĄÍĹÍŰ, ŘŇÎ ĐÎÁIÖĹ "
-#~ "ĎĐŔÂIËÜÍŔ!"
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Çŕđŕç âű ěŕćŕöĺ âűáłđŕöü łíäűâłäóŕëíŕ óńĺ ďŕęĺňű, ˙ęł˙ ćŕäŕĺöĺ\n"
-#~ "óńňŕë˙âŕöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Âű ěîćŕöĺ đŕçăîđňâŕöü ł çăŕđňŕöü äđýâŕ ďŕęĺňŕ˘, íŕöłńęŕţ÷ű íŕîďöűł\n"
-#~ "ó ëĺâűě ęóöĺ âŕęíŕ ďŕęĺňŕ˘.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł âű ćŕäŕĺöĺ áŕ÷űöü ďŕęĺňű ó ŕëôŕâłňíűě ďŕđŕäęó, íŕöłńíłöĺ îďöűţ\n"
-#~ "\"Ńŕđňűđŕâŕöü\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł âű íĺ ćŕäŕĺöĺ ŕňđűěëłâŕöü ďŕď˙đýäćŕííł ŕäíîńíŕ çŕëĺćíŕńö˙˘, \n"
-#~ "íŕöłńíłöĺ \"Çŕëĺćíŕńöł ŕ˘ňŕěŕňű÷íŕ\". Ęŕëł âű çđîáłöĺ ăýňŕ, çŕ˘âŕćöĺ, "
-#~ "řňî\n"
-#~ "řňî íĺ âűáŕđ ŕäíŕăî ďŕęĺňó â˙äçĺ äŕ íĺěŕă÷űěŕńöł âűáđŕöü ďŕęĺňű,\n"
-#~ "˙ęł˙ ŕä ˙ăî çŕëĺćŕöü."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Ęŕëi âű ěŕĺöĺ ˘ńĺ CD äűńęi ńŕ ńďińŕ íićýé, íŕöińíiöĺ Îę.\n"
-#~ "Ęŕëi âű íĺ ěŕĺöĺ ŕíi âîäíŕăŕ ç ăýňűő CD äűńęŕ˘, íŕöińíiöĺ Ŕäě˙íiöü.\n"
-#~ "Ęŕëi íĺęŕňîđűő ç CD äűńęࢠíĺ ěŕĺöĺ, ŕäě˙íiöĺ iő âűäç˙ëĺííĺ i íŕöińíiöĺ "
-#~ "Îę."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Ęŕëł âű ćŕäŕĺöĺ ďŕäęëţ÷űöü âŕř ęîěď'ţňŕđ äŕ Internet öł ËÂŃ, ęŕëł ëŕńęŕ,\n"
-#~ "ŕá˙đűöĺ ďđŕâłëüíóţ îďöűţ. Óęëţ÷űöĺ âŕřó ďđűëŕäó ďĺđŕä âűáŕđŕě ďđŕâłëüíŕé "
-#~ "îďöűł, DrakXçíîéäçĺ ăýňŕ\n"
-#~ "ŕ˘ňŕěŕňű÷íŕ\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł âŕě íĺ ďŕňđýáíŕ ďŕäęëţ÷ýííĺ äŕ Internet öł ËÂŃ, íŕöłńíłöĺ\n"
-#~ "\"Ŕäęëţ÷űöü ďŕäňđűěęó ńĺňęł\".\n"
-#~ "Ęŕëł âű ćŕäŕĺöĺ ŕäęŕíôłăóđŕâŕöü ńĺňęó ďŕńë˙ ˘ńňŕë˙âŕíí˙ öł âű "
-#~ "˘ćîńęîí÷űëł\n"
-#~ "˙ĺ ęŕíôłăóđŕâŕííĺ, íŕöłńíłöĺ \"Âűęŕíŕöü\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Ěŕäýě íĺ çíîéäçĺíű. Ŕá˙đűöĺ ďŕńë˙äî˘íű ďîđň äŕ ˙ęîăŕ ¸í ďŕäęëţ÷ŕíű.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ďĺđřű ďŕńë˙äî˘íű ďîđň (çâŕíű \"COM1\" ó Microsoft Windows) çŕâĺööŕ\n"
-#~ "\"ttyS0\" ó Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Çŕđŕç âű ěîćŕöĺ ˘âĺńöł ďŕđŕěĺňđű ŕääŕëĺíŕăŕ ďŕäëţ÷ýíí˙.\n"
-#~ "Ęŕëł âű íĺ âĺäŕĺöĺ öł íĺ ˘ďý˘íĺíű řňî ňđýáŕ ˘âĺńöł, ńďűňŕéöĺń˙ ó "
-#~ "ńâŕéăî˛nternet\n"
-#~ "ďđŕâŕéäýđó. Ęŕëł âű íĺ ˘âîäçłöĺ łíôŕđěŕöűţ ŕá DNS ńĺđâĺđŕő, ˙íŕ áóäçĺ \n"
-#~ "ŕňđűěŕíŕ ďŕä ÷ŕń çëó÷ýíí˙ ç âŕřűě Internet-ďđŕâŕéäýđŕě."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Ęŕëł ˘ âŕń âîíęŕâű ěŕäýě, ęŕëł ëŕńęŕ, óęëţ÷űöĺ ˙ăî, ł ďîňűě DrakXçíîéçĺ "
-#~ "˙ăî ŕ˘ňŕěŕňű÷íŕ."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Ęŕëł ëŕńęŕ, óęëţ÷űöĺ ěŕäýě ł ŕá˙đűöĺ ďđŕâłëíű."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ęŕëł âű íĺ óďý˘íĺíű, öł ç'˙˘ë˙ĺööŕ âűřýé ďđűâĺäçĺíŕ˙\n"
-#~ "łíôŕđěŕöű˙ ęŕđýęňíŕé öł âű íĺ âĺäŕĺöĺ ŕëüáî í˙˘ďý˘íĺíű˙ řňî ňđýáŕ óâĺńöł\n"
-#~ "ďđŕâčëüíŕ˙\n"
-#~ "łíôŕđěŕöű˙ ěîćŕ áűöü ŕňđűěŕíŕ ŕä âŕřŕăŕ ďđŕâŕéäýđó Internet. Ęŕëł âű íĺ\n"
-#~ "˘âîäçłöĺ łíôŕđěŕöűţ ŕá DNS, ăýňŕ˙ łíôŕđěŕöű˙ áóäçĺ ŕňđűěŕíŕ ŕä âŕřŕăŕ\n"
-#~ "ďđŕâŕéäýđó ďŕä ÷ŕń çëó÷ýíí˙."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Çŕđŕç ěîćíŕ ˘âĺńöi ďŕđŕěĺňđű çëó÷ýíí˙ ďđŕç ěŕäýě (dialup). Ęŕëi âű\n"
-#~ "íĺ âĺäŕĺöĺ, řňî ďŕňđýáíŕ ďińŕöü,\n"
-#~ "ďŕńďđŕáóéöĺ ŕňđűěŕöü äŕęëŕäíóţ iíôŕđěŕöűţ ˘ ńâŕéăî ďđŕâŕéäýđó Internet "
-#~ "(ISP)."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ęŕëł íĺŕáőîäíŕ, âű ěŕćŕöĺ óâĺńöł łě˙ âŕřŕăŕ őŕńňŕ. Ęŕëł âű\n"
-#~ "íĺ âĺäŕĺöĺ öł íĺ ˘ďĺ˘íĺíű˙, řňî ňđýáŕ ˘âŕäçłöü. Ďŕęłíöĺ ďîëĺ ďóńňűě."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ęŕëł íĺŕáőîäíŕ, âű ěŕćŕöĺ óâĺńöł łě˙ âŕřŕăŕ őŕńňŕ. Ęŕëł âű\n"
-#~ "íĺ âĺäŕĺöĺ öł íĺ ˘ďĺ˘íĺíű˙, řňî ňđýáŕ ˘âŕäçłöü. Ďŕęłíöĺ ďîëĺ ďóńňűě."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Çŕđŕç ěîćíŕ ˘âĺńöi ďŕđŕěĺňđű çëó÷ýíí˙ ďđŕç ěŕäýě (dialup). Ęŕëi âű\n"
-#~ "íĺ âĺäŕĺöĺ, řňî ďŕňđýáíŕ ďińŕöü,\n"
-#~ "ďŕńďđŕáóéöĺ ŕňđűěŕöü äŕęëŕäíóţ iíôŕđěŕöűţ ˘ ńâŕéăî ďđŕâŕéäýđó Internet "
-#~ "(ISP)."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ęŕëi âű çáiđŕĺöĺń˙ âűęŕđűńňî˘âŕöü proxy, iő ŕäđŕńű ěîćíŕ ˘âĺńöi çŕđŕç.\n"
-#~ "Ęŕëi âű íĺ âĺäŕĺöĺ, ŕá ÷űě iäçĺ đŕçěîâŕ, çâ˙đíiöĺń˙ äŕ ŕäěiíińňđŕňŕđŕ\n"
-#~ "ńĺňęi öi äŕ Internet-ďđŕâŕéäýđó."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Çŕđŕç âű ěîćŕöĺ ŕáđŕöü ÷ŕńŕâű ďî˙ń çăîäíŕ ç ěĺńöŕě ćűőŕđńňâŕ."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Âű ěîćŕöĺ ęŕíôłăóđŕâŕöü ëŕęŕëüíű ďđűíňýđ (çëó÷ŕíű ç âŕřűě ęŕěď'ţňŕđŕě)\n"
-#~ "öł ŕääŕëĺíű ďđűíňýđ (äŕńňóďíű ďđŕç Unix, Netware öł ńĺňęó MS Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Ęŕëł âű ćŕäŕĺöĺ ěĺöü äđóę, ęŕëł ëŕńęŕ, ŕá˙đűöĺ ŕäíó ç ńłńňýěࢠäđóęó\n"
-#~ "CUPS öł LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ăýňŕ íîâŕ˙, ěŕăóňíŕ˙ ł ăíóňęŕ˙ ńłńňýěŕ äđóęó äë˙ Unix ńłńňýěࢠ"
-#~ "(CUPS\n"
-#~ "- \"Common Unix Printing System\"). Ăýňŕ ńłńňýěŕ äđóęó ďŕ çěî˘÷ŕííţ˘\n"
-#~ "ŕďĺđŕöűéíŕé ńłńňýěĺ Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR - ńňŕđŕ˙ ńłńňýěŕ äđóęó ˘ ďŕď˙đýäíłő âĺđńł˙ő äűńňđűáţňűâóMandrake "
-#~ "Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł âű íĺ ěŕĺöĺ ďđűíňýđó, íŕöłńíłöĺ \"Í˙ěŕ\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ěîćŕ ďđŕöŕâŕöü ńŕ řěŕňëłęłěł ňűďŕěł ďđűíňýđŕ˘. Ęîćíű ç ęŕňîđűő\n"
-#~ "ďŕňđŕáóĺ đîçíŕĺ ˘ńňŕë˙âŕííĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł ďđűíňŕđ ôłçł÷ŕ ďŕäęëţ÷ŕíű äŕ ęŕěď'ţňĺđó, ŕá˙đűöĺ \"Ëŕęŕëüíű\n"
-#~ "ďđűíňýđ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł ďđűíňŕđ ďŕäęëţ÷ŕíű äŕ ŕääŕëĺíŕé Unix ěŕřűíű, ŕá˙đűöĺ\n"
-#~ "\"Ŕääŕëĺíű ďđűíňýđ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł ďđűíňýđ ďŕäęëţ÷ŕíű äŕ ŕääŕëĺíŕé ěŕřűíű Microsoft Windows (öł äŕ "
-#~ "Unix\n"
-#~ "ěŕřűíű, ˙ęŕ˙ âűęŕđűńňî˘âŕĺ ďđŕňŕęîë SMB), ŕá˙đűöĺ \"SMB/Windows 95/98/NT"
-#~ "\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ " other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Location: if you want to put some information on your\n"
-#~ " printer location, put it here (you are free to write what\n"
-#~ " you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Ęŕëł ëŕńęŕ ˘ęëţ÷űöĺ âŕř ďđűíňŕđ ďĺđŕä ďđŕö˙ăŕě,ł DrakX çíîéäçĺ ˙ăî.\n"
-#~ "\n"
-#~ "Âű ďŕâłííű ˘âĺńüöł íĺęŕňîđóţ łíôŕđěŕöűţ.\n"
-#~ "\n"
-#~ "\n"
-#~ " * ˛ě˙ ďđűíňýđó: ÷ŕđăŕ ďđűíňýđó âűęŕđűńňî˘âŕĺ ďŕ çěî˘÷ŕííţ łě˙ \"lp\"˙ę "
-#~ "łě˙ ďđűíňýđó\n"
-#~ "Ňŕę, âű ďŕâłííű ěĺöü ďđűíňŕđ çâŕíű \"lp\".\n"
-#~ " Ęŕëł âű ěŕĺöĺ ňîëüęł ŕäçłí ďđűíňŕđ, âű ěîćŕöĺ ěĺöü äë˙ ˙ăî "
-#~ "íĺęŕëüęłíŕçâŕ˘. Âű ňîëüęł ďŕâłííű ŕääç˙ëłöü łő ëł÷áŕé ęŕíŕëó ( \"|\").\n"
-#~ " Ňŕę, ęŕëł ëţáłöĺ áîëüř łíôŕđěŕöűéíű˙ íŕçâű, âű ďŕâłííű óńňŕâŕłöü "
-#~ "ńď˙đřŕ ˙ĺ , ďđűęë.: \"My printer|lp\".\n"
-#~ " Ďđűíňýđ ç łěĺě \"lp\" áóäçĺ çŕäŕäçĺíű ďđűíňýđŕě ďŕ çěî˘÷ŕííţ.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Ŕďłńŕííĺ: ăýňŕ íĺŕáŕâ˙çęîâŕ, ŕëĺ ěîćŕ áűöü ęŕđűńíŕ, ęŕëł íĺęŕëüęł "
-#~ "ďđűíňýđࢠçëó÷ŕíű çâŕřűě ęŕěď'ţňĺđŕě öł âű íĺ\n"
-#~ " äŕçâŕë˙ĺöĺ äîńňóď łířűě ęŕěď'ţňĺđŕě äŕ ăýňŕăŕ ďđűíňýđó.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Đŕçě˙ř÷ýííĺ: ęŕëł âű ćŕäŕĺöĺ đŕçě˙ńöiöü ďý˘íóţ łíôŕđěŕöűţ ŕäíîńíŕ\n"
-#~ " đŕçě˙ř÷ýíí˙ ďđűíňýđŕ, óńňŕ˘öĺ ˙ĺ ńţäű (âű âîëüíű˙ ďłńŕöü óń¸ řňî\n"
-#~ " çŕ˘ăîäíŕ, íŕďđűęëŕä \"2nd floor\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ " \n"
-#~ " * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ " if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ " If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ " protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Ňóň âű ďŕâłííű óâĺńöł íĺęŕňîđóţ łíôŕđěŕöűţ.\n"
-#~ "\n"
-#~ "\n"
-#~ " * ˛ě˙ ÷ŕđăł: âűęŕđűńňî˘âŕĺööŕ \"lp\" ˙ę łě˙ ďđűíňýđó ďŕ çěî˘÷ŕííţ. "
-#~ "Ňŕę, âű ďŕâłííű ěĺöü ďđűíňýđ çâŕíű \"lp\".\n"
-#~ " Ęŕëł âű ěŕĺöĺ ňîëüęł ŕäçłí ďđűíňŕđ, âű ěîćŕöĺ ěĺöü äë˙ ˙ăî "
-#~ "íĺęŕëüęłíŕçâŕ˘. Âű ňîëüęł ďŕâłííű ŕääç˙ëłöü łő ëł÷áŕé ęŕíŕëó ( \"|\").\n"
-#~ " Ňŕę, ęŕëł ëţáłöĺ áîëüř łíôŕđěŕöűéíű˙ íŕçâű, âű ďŕâłííű óńňŕâŕłöü "
-#~ "ńď˙đřŕ ˙ĺ , ďđűęë.: \"My printer|lp\".\n"
-#~ " Ďđűíňýđ ç łěĺě \"lp\" áóäçĺ çŕäŕäçĺíű ďđűíňýđŕě ďŕ çěî˘÷ŕííţ.\n"
-#~ "\n"
-#~ " \n"
-#~ " * Äűđűęňîđű˙ spool: ó ¸é çíŕőîäç˙ööŕ çŕěîâű íŕ âűęŕíŕííĺ äđóęó. "
-#~ "Çŕőŕâŕéöĺ ŕáđŕíŕĺ\n"
-#~ " ďŕ çěî˘÷ŕííţ, ęŕëł íĺ âĺäŕĺöĺ ˙ę ăýňűě ęŕđűńňŕööŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Ďŕäęëţ÷ýííĺ ďđűíňýđó: ęŕëł ďđűíňýđ ôłçł÷íŕ çëó÷ŕíű ç ęŕěď'ţňĺđŕě, "
-#~ "ŕá˙đűöĺ \"Ëŕęŕëüíű ďđűíňýđ\".\n"
-#~ " Ęŕëł ďđűíňýđ ďŕäęëţ÷ŕíű äŕ ŕääŕëĺíŕé Unix ěŕřűíű, ŕá˙đűöĺ \"Ŕääŕëĺíű "
-#~ "lpd ďđűíňýđ\".\n"
-#~ "\n"
-#~ "\n"
-#~ " Ęŕëł âű ďđűíňýđ ďŕäęëţ÷ŕíű äŕ ŕääŕëĺíŕé ěŕřűíű MS Windows (öł äŕ "
-#~ "Unix ěŕřűíű, ˙ęŕ˙ âűęŕđűńňî˘âŕĺ ďđŕňŕęîë SMB,\n"
-#~ " ŕá˙đűöĺ \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " Ęŕëł ďđűíňŕđ ďŕäęëţ÷ŕíű äŕ ńĺňęł NetWare, ŕá˙đűöĺ \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Âŕř ďđűíňŕđ íĺ áű˘ çíîéäçĺíű. Ęŕëł ëŕńęŕ ˘â˙äçłöĺ łě˙ ďđűëŕäű äŕ ˙ęîé ¸í\n"
-#~ "ďŕäęëţ÷ŕíű.\n"
-#~ "\n"
-#~ "\n"
-#~ "Áîëüřŕńü ďđűíňŕđࢠďŕäęëţ÷ŕţööŕ äŕ ďĺđřŕăŕ ďŕđŕëĺëüíŕăŕ ďîđňó.¨í\n"
-#~ "çŕâĺööŕ \"/dev/lp0\" ó GNU/Linux ł \"LPT1\" ó Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Âű ďŕâłííű ŕáđŕöü âŕř ďđűíňŕđ ńŕ ńďłńó."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Ęŕëł ëŕńęŕ, ŕá˙đűöĺ ďđŕâłëíű˙ îďöűł ˘ ŕäďŕâĺäíŕńüöł âŕřŕěó ďđűíňŕđó.\n"
-#~ "Ęŕëł ëŕńęŕ,ăë˙äçłöĺ äŕęóěĺíňŕöűţ ęŕëł íĺ âĺäŕĺöĺ řňî ŕáđŕöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëł âű ćŕäŕĺöĺ, âű áóäçĺöĺ çäîëüíű˙ ďđŕňýńňŕâŕöü âŕřóţ ęŕíôłăóđŕöűţ\n"
-#~ "íŕ íŕńňóďíűě ęđîęó ł çüě˙íłöü ˙ĺ."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Çŕđŕç âű ěîćŕöĺ ńňâŕđűöü ŕäçií ŕëüáî íĺęŕëüęi \"çâű÷ŕéíűő\" óëięîâűő "
-#~ "çŕďińŕ˘\n"
-#~ "ęŕđűńňŕëüíięŕ˘. Äë˙ ęîćíŕăŕ ęŕđűńňŕëüíięŕ ěŕă÷űěŕ ńňâŕđűöü ďŕ ŕäíŕěó öi "
-#~ "íĺęŕëüęi\n"
-#~ "˘ëięîâűő çŕďińŕ˘. Äë˙ ęîćíŕăŕ ˘ëięîâŕăŕ çŕďińó ńňâŕđŕţööŕ ˘ëŕńíű˙ "
-#~ "íŕńňđîéęi\n"
-#~ "(ăđŕôi÷íŕĺ ŕńń˙đîääçĺ, íŕńňđîéęi ďđŕăđŕě,...) i ˘ëŕńíű \"őŕňíi ęŕňŕëŕă"
-#~ "\",\n"
-#~ "ó ˙ęiě çŕőî˘âŕţööŕ ăýňű˙ íŕńňđîéęi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ďŕ-ďĺđřŕĺ, ńňâŕđűöĺ ˘âŕőîä äë˙ ń˙áĺ! Íŕâŕň ęŕëi âű áóäçĺöĺ ŕäçiíűě\n"
-#~ "ęŕđűńňŕëüíięŕě ăýňŕé ěŕřűíű, íĺ đýęŕěĺíäóĺööŕ óâŕőîäçiöü ç ďđŕâŕěi\n"
-#~ "ńóďĺđęŕđűńňŕëüíięó äë˙ řňîäç¸ííŕé ďđŕöű: ăýňŕ çŕíŕäňŕ â˙ëięŕ˙ ďŕăđîçŕ\n"
-#~ "á˙ńďĺęi. Ěŕă÷űěŕ çíiř÷űöü ńińňýěó çâű÷ŕéíŕé ďŕěűëęŕé äđóęó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ňŕěó ˘âŕőîäçiöü ó ńińňýěó íĺŕáőîäíŕ ç ďđŕâŕěi çâű÷ŕéíŕăŕ ęŕđűńňŕëüíięó,\n"
-#~ "˙ęîăŕ âű çŕđŕç i ńňâîđűöĺ, ŕ ˘âŕőîäçiöü ç ďđŕâŕěi root íĺŕáőîäíŕ ňîëüęi\n"
-#~ "ç ěýňŕěi ŕäěiíińňđűđŕâŕíí˙ i ŕáńëóăî˘âŕíí˙ ńińňýěű."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Ńňâŕđýííĺ boot äűńęó ńňđîăŕ đýęŕěĺíäŕâŕíŕ! Ęŕëł âű íĺ çěîćŕöĺ\n"
-#~ "çŕăđóçłöü âŕř ęŕěď'ţňŕđ, äűę ăýňŕ âŕř ŕäçłíű ńďîńŕá ŕäíŕâłöü\n"
-#~ "ńłňýěű áĺç ĺéíŕăŕ ďĺđŕ˘ńňŕë˙âŕíüí˙."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Ŕńíî˘íű˙ ďŕđŕěĺňđű SILO:\n"
-#~ " - Óńňŕë˙âŕííĺ çŕăđóç÷űęó: Ŕá˙đűöĺ ěĺńöŕ, äçĺ âű ćŕäŕĺöĺ çěĺńöiöü\n"
-#~ "iíôŕđěŕöűţ, ďŕňđýáíóţ äë˙ çŕăđóçęi GNU/Linux. Ęŕëi íĺ ˘ďý˘íĺíű, řňî\n"
-#~ "đîáiöĺ ďđŕâiëüíŕ, ŕá˙đűöĺ \"Ďĺđřű ńĺęňŕđ äűńęŕ (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Çŕňđűěęŕ ďŕ çěî˘÷ŕííţ ďĺđŕä çŕăđóçęŕé âîáđŕçó: Çŕäŕĺ ÷ŕń ó äç˙ń˙ňűő\n"
-#~ "ńĺęóíäű, íŕ ďđŕö˙ăó ˙ęîăŕ çŕăđóç÷űę ÷ŕęŕĺ ďĺđŕä çŕăđóçęŕé âîáđŕçó ďŕ "
-#~ "çěî˘÷ŕííţ.\n"
-#~ "Ăýňű ďŕđŕěĺňŕđ ęŕđűńíű äë˙ ńińňýěŕ˘, ˙ęi˙ ŕäđŕçó çŕăđóćŕţööŕ ç ćîđńňęŕăŕ\n"
-#~ "äűńęó ŕäđŕçó ŕďŕńë˙ ˘ęëţ÷ýíí˙ ęëŕâi˙ňóđű. Çŕăđóç÷űę íĺ ÷ŕęŕĺ, ęŕëi "
-#~ "\"çŕňđűěęŕ\"\n"
-#~ "\"çŕňđűěęŕ\" íĺ áóäçĺ ďŕçíŕ÷ŕíŕ öi óńňŕë˙âŕíŕ íŕ íîëü."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO - ăýňű çŕăđóç÷űę äë˙ SPARC. ¨í ěîćŕ çŕăđóçiöü äđóăóţ\n"
-#~ "GNU/Linux öi ëţáóţ iířóţ ŕďĺđŕöűéíóţ ńińňýěó, óńňŕë˙âŕíóţ íŕ ęŕěďóňŕđű.\n"
-#~ "Çâű÷ŕéíŕ, ăýňű˙ iířű˙ ŕďĺđŕöűéíű˙ ńińňýěű ęŕđýęňíŕ âűçíŕ÷ŕţööŕ i\n"
-#~ "˘ńňŕ븢âŕţööŕ. Ęŕëi ăýňŕ íĺ ŕňđűěŕëŕń˙, ňî âű ěîćŕöĺ äŕäŕöü ëţáű çŕďiń\n"
-#~ "ńŕěŕńňîéíŕ. Áóäçüöĺ ˘ďý˘íĺíű, řňî âű çŕäŕëi ęŕđýęňíű˙ ďŕđŕěĺňđű.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ňŕęńŕěŕ âű ěîćŕöĺ ďŕćŕäŕöü i íĺ äŕäâŕöü iířű˙ ŕďĺđŕöűéíű˙ ńińňýěű.\n"
-#~ "Ó ňŕęiě âűďŕäęó ďŕňđýáíŕ âűäŕëiöü ŕäďŕâĺäíű˙ çŕďińű. Ŕëĺ ć ňŕäű âŕě \n"
-#~ "áóäçĺ ďŕňđýáíű iíńňŕë˙öűéíű äűńę, ęŕá çŕăđóçiööŕ."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ " - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Ŕńíî˘íű˙ ďŕđŕěĺňđű SILO:\n"
-#~ " - Óńňŕë˙âŕííĺ çŕăđóç÷űęó: Ŕá˙đűöĺ ěĺńöŕ, äçĺ âű ćŕäŕĺöĺ çěĺńöiöü\n"
-#~ "iíôŕđěŕöűţ, ďŕňđýáíóţ äë˙ çŕăđóçęi GNU/Linux. Ęŕëi íĺ ˘ďý˘íĺíű, řňî\n"
-#~ "đîáiöĺ ďđŕâiëüíŕ, ŕá˙đűöĺ \"Ďĺđřű ńĺęňŕđ äűńęŕ (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Çŕňđűěęŕ ďŕ çěî˘÷ŕííţ ďĺđŕä çŕăđóçęŕé âîáđŕçó: Çŕäŕĺ ÷ŕń ó äç˙ń˙ňűő\n"
-#~ "ńĺęóíäű, íŕ ďđŕö˙ăó ˙ęîăŕ çŕăđóç÷űę ÷ŕęŕĺ ďĺđŕä çŕăđóçęŕé âîáđŕçó ďŕ "
-#~ "çěî˘÷ŕííţ.\n"
-#~ "Ăýňű ďŕđŕěĺňŕđ ęŕđűńíű äë˙ ńińňýěŕ˘, ˙ęi˙ ŕäđŕçó çŕăđóćŕţööŕ ç ćîđńňęŕăŕ\n"
-#~ "äűńęó ŕäđŕçó ŕďŕńë˙ ˘ęëţ÷ýíí˙ ęëŕâi˙ňóđű. Çŕăđóç÷űę íĺ ÷ŕęŕĺ, ęŕëi "
-#~ "\"çŕňđűěęŕ\"\n"
-#~ "\"çŕňđűěęŕ\" íĺ áóäçĺ ďŕçíŕ÷ŕíŕ öi óńňŕë˙âŕíŕ íŕ íîëü."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Çŕđŕç ěŕă÷űěŕ íŕńňđîiöü X Window System, ˙ęŕ˙ ç'˙˘ë˙ĺööŕ\n"
-#~ "ŕńíîâŕé Linux GUI (Ăđŕôi÷íű Iíňýđôĺéń Ęŕđűńňŕëüíięŕ). Äçĺë˙ ăýňŕăŕ\n"
-#~ "ďŕňđýáíŕ íŕńňđîiöü âiäýŕęŕđňó i ěŕíiňîđ. Áîëüřŕ˙ ÷ŕńňęŕ ăýňűő ęđîęŕ˘\n"
-#~ "ŕ˘ňŕěŕňűçŕâŕíŕ, ňŕěó âŕřŕ ďđŕöŕ ěîćŕ çŕęëţ÷ŕööŕ ˘ ďđŕâĺđöű\n"
-#~ "âűíięࢠíŕńňđîéęi i ďŕäöâĺđäćŕííţ ŕáđŕíűő ďŕđŕěĺňđࢠ:)\n"
-#~ "\n"
-#~ "Ęŕëi ęŕíôiăóđŕâŕííĺ çŕâĺđřűööŕ, áóäçĺ çŕďóř÷ŕíű X (ęŕëi âű íĺ\n"
-#~ "ďŕďđîńiöĺ DrakX íĺ đŕáiöü ăýňŕăŕ), ęŕá âű çěŕăëi ďđŕâĺđűöü, öi çăîäíű\n"
-#~ "âű ç íŕńňđîéęŕěi. Ęŕëi íĺ, ňî çŕ˘ń¸äű ěŕă÷űěŕ â˙đíóööŕ i çě˙í˙öü iő\n"
-#~ "ęîëüęi âŕě ďŕňđýáíŕ."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Ęŕëi íĺřňŕ íĺ ňŕę ç íŕńňđîéęŕé X, ńęŕđűńňŕéöĺ ăýňű˙ ďŕđŕěĺňđű äë˙ \n"
-#~ "ęŕđýęňíŕé íŕńňđîéęi X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ęŕëi âű ŕääŕĺöĺ ďĺđŕâŕăó ăđŕôi÷íŕěó ˘âŕőîäó (login), ŕá˙đűöĺ \"Ňŕę\". "
-#~ "Iíŕęř - \n"
-#~ "\"Íĺ\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ńińňýěŕ çáiđŕĺööŕ ďĺđŕçŕăđóçiööŕ.\n"
-#~ "\n"
-#~ "Ďŕńë˙ ďĺđŕçŕăđóçęi, âŕřŕ íîâŕ˙ ńińňýěŕ Mandrake Linux çŕăđóçiööŕ "
-#~ "ŕ˘ňŕěŕňű÷íŕ.\n"
-#~ "Ęŕëi âű ćŕäŕĺöĺ ďĺđŕçŕăđóçiöŕ ďŕä iířóţ ŕďĺđŕöűéíóţ ńińňýěó, ÷űňŕéöĺ \n"
-#~ "äŕäŕňęîâű˙ iíńňđóęöűi."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Çŕďiń /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Ôŕđěŕňŕâŕöü óń¸"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Ďŕńë˙ ôŕđěŕňŕâŕíí˙ ˘ńiő đŕçäçĺëŕ˘,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "óńĺ äŕäçĺíű˙ ˘ ăýňűő đŕçäçĺëŕő áóäóöü ńňđŕ÷ŕíű"
-
-#~ msgid "Reload"
-#~ msgstr "Ďĺđŕçŕăđóçiöü"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Öi ćŕäŕĺöĺ âű ńňâŕđűöü ŕ˘ňŕ˘ńňŕë¸âŕ÷íű ôëîďi-äűńę äë˙ đĺďëięŕöűi linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Íŕńňđîéęŕ ADSL"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Ŕääŕëĺíű CUPS ńĺđâĺđ íĺ ďŕňđŕáóĺ ŕä Âŕń íŕńňđîéęł ďđűíňýđó\n"
-#~ "íŕ ăýňŕé ěŕřűíĺ, ¸í áóäçĺ çíîéäçĺíű ŕ˘ňŕěŕňű÷íŕ.\n"
-#~ "Ęŕëł Âű íĺ ˘ďý˘íĺíű, ŕá˙đűöĺ \"Ŕääŕëĺíű ńĺđâĺđ CUPS\"."
-
-#~ msgid "Remote queue"
-#~ msgstr "Ŕääŕëĺíŕ˙ ÷ŕđăŕ äđóęó"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Ŕääŕëĺíŕ˙ ÷ŕđăŕ äđóęó"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Iě˙ äŕěĺíó"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Iě˙ äđóęŕđęi"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Ęŕíôiăóđŕöű˙ ńĺňęi"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "ďŕěűëęŕ ěŕíöiđŕâŕíí˙: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Iě˙ çëó÷ýíí˙"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Äŕëó÷ýííĺ äŕ Iíňýđíýňó"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Äŕëó÷ýííĺ äŕ Iíňýđíýňó"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Äŕëó÷ýííĺ äŕ Iíňýđíýňó"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Äŕëó÷ýííĺ äŕ Iíňýđíýňó"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Iě˙ çëó÷ýíí˙"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Ďŕ äŕěŕ˘ëĺííţ"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Íĺ ŕňđűěëłâŕĺööŕ ŕďđŕöŕâŕöü çěĺńň ôŕéëŕ íŕńňđîĺę."
-
-#~ msgid "Disable network"
-#~ msgstr "Çđŕáiöü íĺŕęňű˘íűě ńĺňęŕâŕĺ çëó÷ýííĺ"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Çđŕáiöü íĺŕęňű˘íűě ńĺňęŕâŕĺ çëó÷ýííĺ"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Çŕđŕç âű ěîćŕöĺ ŕäňýńňŕâŕöü âŕřó ěűř. Íŕöłńęŕéöĺ íŕ ęíîďęł ł\n"
-#~ "đóřöĺ ęîëŕ. Ęŕëł óńňŕë˙âŕííł ďŕěűëęîâű˙ íŕöłńíłöĺ \"Ŕäěĺíŕ\" ęŕá "
-#~ "óńňŕë˙âŕöü\n"
-#~ "łířű äđŕéâĺđ."
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Ďîđň ěűřű"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Âű ěîćŕöĺ âűçíŕ÷űöü íŕ˘ďđîńň URI ęŕá äŕëó÷űööŕ äŕ äđóęŕđęi ç CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ňŕę, íŕäđóęŕâŕöü ńňŕđîíęó ňýęńňó ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ňŕę, íŕäđóęŕâŕöü ńňŕđîíęó ňýęńňó PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ďŕěĺđű ďŕďĺđű"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Âűřňóđőâŕöü ďŕďĺđó ďŕńë˙ äđóęó?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Ďŕđŕěĺňđű äđŕéâĺđó Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Ďŕđŕěĺňđű ăëűáiíi ęîëĺđó"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Äđóęŕâŕöü ňýęńň ˙ę PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Ęŕđýęňŕâŕöü ďđűńňóďęŕâű ňýęńň?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Íóěŕđ ńňŕđîíęi ŕä ęîëüęŕńöi íŕäđóęŕâŕíűő ńňŕđîíŕę"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Ďđŕâŕĺ/ëĺâŕĺ ďŕëi ˘ ęđîďęŕő (1/72 äçţéěŕ)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Âĺđőí˙ĺ/Íićí˙ĺ ďŕëi ˘ ęđîďęŕő (1/72 äçţéěŕ)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Äŕäŕňęîâű˙ îďöűi GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Äŕäŕňęîâű˙ ďŕđŕěĺňđű ňýęńňó"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Ŕäâŕđîňíű ďŕđŕäŕę ńňŕđîíŕę"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Âűáŕđ ňűďó çëó÷ýíí˙ ç ŕääŕëĺíűě ďđűíňýđŕě"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Ęîćíŕ˙ ÷ŕđăŕ äđóęó, ó ˙ęóţ ŕäďđŕ˘ë˙ţööŕ çŕäŕííi äë˙ äđóęó, ďŕňđŕáóĺ "
-#~ "ďŕçíŕ÷ýíí˙ iě˙ (çâű÷ŕéíŕ lp). Äđóăi˙ ďŕđŕěĺňđű, ňŕęi˙ ˙ę ŕďińŕííĺ "
-#~ "äđóęŕđęi öi\n"
-#~ " ˙ăî đŕçěĺđęŕâŕííĺ, ěîăóöü áűöü ďŕçíŕ÷ŕíű. ßęîĺ iě˙ äŕ äđŕęóđęi âű "
-#~ "áóäçĺöĺ\n"
-#~ "ńęŕđűńňî˘âŕöü i ˙ę ăýňŕ˙ äđóęŕđęŕ äŕëó÷ŕĺööŕ?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Ęîćíŕ˙ ÷ŕđăŕ äđóęó, ó ˙ęóţ ŕäďđŕ˘ë˙ţööŕ çŕäŕííi äë˙ äđóęó, ďŕňđŕáóĺ "
-#~ "ďŕçíŕ÷ýíí˙ iě˙ (çâű÷ŕéíŕ lp) i ńďŕëó÷ŕíŕăŕ ç ¸ţ ęŕňŕëîăó ńďóëiíăó. "
-#~ "Ďŕçíŕ÷öĺ iě˙ i ęŕňŕëîă äë˙ ÷ŕđăi."
-
-#~ msgid "Name of queue"
-#~ msgstr "Iě˙ ÷ŕđăi äđóęó"
-
-#~ msgid "Spool directory"
-#~ msgstr "Äűđýęňîđű˙ ńďóëiíăó"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Ňŕáëiöŕ"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Ňŕáëiöŕ"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Ęŕá óçěŕöíiöü á˙ńďĺęó ńińňýěű, íĺŕáőîäíŕ ŕáđŕöü \"Ńęŕđűńňŕöü ńőŕâŕíű ôŕéë"
-#~ "\"\n"
-#~ "i \"Ńęŕđűńňŕöü ďŕđîëi MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ęŕëi ˘ âŕřŕé ńĺňöű âűęŕđűńňî˘âŕĺööŕ NIS, ŕá˙đűöĺ \"Ńęŕđűńňî˘âŕöü NIS\". "
-#~ "Ęŕëi\n"
-#~ "íĺ âĺäŕĺöĺ, çŕďűňŕéöĺ ŕäěiíińňđŕňŕđŕ ńĺňęi."
-
-#~ msgid "yellow pages"
-#~ msgstr "ćî˘ňű˙ ńňŕđîíęi"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Íŕńňđîéęŕ ADSL"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 ďđŕâŕéäŕđó"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 ďđŕâŕéäŕđó"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "ßę âű ďëŕíóĺöĺ äŕëó÷űööŕ äŕ Iíňýđíýňó?"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Ŕá˙đűöĺ ôŕéë"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "ßęi ňűď âŕřŕăŕ ISDN çëó÷ýíí˙?"
-
-#, fuzzy
-#~ msgid "Configure..."
-#~ msgstr "Íŕńňđîéęŕ IDE"
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Íŕńňđîéęŕ: Äŕäŕöü ęđűíiöó"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr " Ăýňű ďóńęŕâű ńęđűďň ŕäíŕ˘ë˙ĺ ˘ńĺ ěîäóëi äë˙ usb ěűřű."
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Íŕńňđîéęŕ ďŕńë˙ ˘ńňŕë˙âŕíí˙"
-
-#, fuzzy
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Âŕř ęŕěď'ţňŕđ ěîćŕ áűöü ńęŕíôłăóđŕâŕíű íŕ ńóěĺńíŕĺ âűęŕđűńňŕííĺ\n"
-#~ " ˛íňýđíýňó (Internet Connection Sharing)?\n"
-#~ "\n"
-#~ "Çŕ˘âŕăŕ: âŕě ďŕňđýáíű ńĺňęŕâű ŕäŕďňŕđ äë˙ ďŕäęëţ÷ýíí˙ äŕ ËÂŃ.\n"
-#~ "\n"
-#~ "Âű ćŕäŕĺöĺ óńňŕë˙âŕöü ńóěĺńíű äîńňóď äŕ Internet?"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Ďđŕâĺđęŕ çŕëĺćíŕńö˙˘"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Íŕńňđîéęŕ LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Ńňâŕđűöü çŕăđ. äűńę"
-
-#~ msgid "Choice"
-#~ msgstr "Âűáŕđ"
-
-#, fuzzy
-#~ msgid "gMonitor"
-#~ msgstr "Ěŕíiňîđ"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Đîçíŕĺ"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Äŕäŕňęîâű˙ ďűňŕííi"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Íĺ ěŕăó âűęŕđűńňî˘âŕöü ěŕíöiđŕâŕííĺ ďđű âűńîęiě óçđî˘íi á˙ńďĺęi"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Çŕńö˙đîăŕ: ĎĐŰ ÂŰŃÎĘIĚ ÓÇĐÎĄÍI ÁßŃĎĹĘI ĄÂŔŐÎÄ ßĘ ROOT Ç ĘŔÍŃÎËI ÍĹ "
-#~ "ÄŔÇÂŔËßĹÖÖŔ!\n"
-#~ "Ęŕëi âű ćŕäŕĺöĺ ˘âŕőîäçiöü ˙ę root, óâŕőîäçüöĺ ˙ę ęŕđűńňŕëüíię, çŕňűě \n"
-#~ "âűęîíâŕéöĺ \"su\".Ó ňŕęiě âűďŕäęó, ěîćŕöĺ âűęŕđűńňî˘âŕöü ěŕřűíó íĺ äë˙ "
-#~ "˘ń˙ăî,\n"
-#~ "ŕ ňîëüęi ˙ę ńĺđâĺđ.\n"
-#~ "Ěŕéöĺ íŕ ˘âŕçĺ, řňî âű áűëi ďŕď˙đýäćŕíű˙."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Áóäçüöĺ ˘âŕćëiâű, óęëţ÷ýííĺ NumLock ěîćŕ ďđűâĺńöi äŕ ďŕěűëęîâŕé\n"
-#~ "ďđŕöű ęëŕâi˙ňóđű (íŕďđűęëŕä, íŕöińę íŕ `p' äŕĺ `6')."
-
-#, fuzzy
-#~ msgid "Actions"
-#~ msgstr "Đŕçěĺđęŕâŕííĺ"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Íŕâóęîâű˙ ďđűęëŕäŕííł"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Ďĺđřű ńĺđâĺđ DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Äđóăi ńĺđâĺđ DNS:"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Đýćűě çëó÷ýíí˙"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s óćî âűęŕđűńňî˘âŕĺööŕ"
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: Ăýňŕ íĺ ęŕđŕí¸âű đŕçäçĺë, ęŕëi ëŕńęŕ ŕá˙đűöĺ iířű."
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(ěîćŕ âűçâŕöü çíiř÷ýííĺ äŕäçĺíűő)"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (ďŕńë˙äî˘íŕ˙)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Äŕäŕöü ęđűíiöó ďŕęĺňŕ˘"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Ďŕńë˙ %s đŕçáĺéöĺ %s,"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Ěŕäýě Alcatel"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Óńĺ âűçíŕ÷ŕíű˙ đŕçäçĺëű ďŕâiííű áűöü ŕäôŕđěŕňŕâŕíű äë˙ âűęŕđűńňŕíí˙\n"
-#~ "(ôŕđěŕňŕâŕííĺ çíŕ÷űöü ńňâŕđýííĺ ôŕéëŕâŕé ńińňýěű). Ó ăýňŕé ńiňóŕöűi\n"
-#~ "ěîćíŕ ďĺđŕôŕňŕâŕöü óćî ińíóţ÷ű˙ đŕçäçĺëű äçĺë˙ çíiř÷ýíí˙ äŕäçĺíűő,\n"
-#~ "˙ęi˙ çíŕőîäç˙ööŕ íŕ iő. Çŕ˘âŕăŕ: ôŕđěŕňŕâŕöü ińíóţ÷ű˙ đŕçäçĺëű íĺ "
-#~ "ŕáŕâ˙çęîâŕ,\n"
-#~ "ŕńŕáëiâŕ ęŕëi ˙íű çě˙ř÷ŕţöü ôŕéëű i äŕäçĺíű˙, ˙ęi˙ âű ćŕäŕĺöĺ çŕőŕâŕöü.\n"
-#~ "Çâű÷ŕéíŕ çŕőî˘âŕţöü /home i /usr/local."
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB Ěűř"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB Ěűř (2 ęíîďęi)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB Ěűř (3 ęíîďęi öi áîëĺé)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB Ěűř"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB Ěűř (2 ęíîďęi)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB Ěűřü (3 ęíîďęi öi áîëĺé)"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Âű ˘ďý˘íĺíű, řňî çěîćŕöĺ ďđŕö˙ăíóöü ďđŕöýń óńňŕë˙âŕíí˙ ˙ę ýęńďĺđň?\n"
-#~ "Ó ăýňűě âűďŕäęó Âű áóäçĺöĺ ěĺöü áîëüřű ęŕíňđîëü íŕä ďđŕöýńŕě "
-#~ "óńňŕë˙âŕíí˙,\n"
-#~ "ŕëĺ âűíięi ďŕěűëęi ěîăóöü áűöü ôŕňŕëüíű˙.\n"
-#~ "\n"
-#~ "Âŕě áóäóöü çŕäŕäçĺíű, íŕďđűęëŕä, ňŕęi˙ ďűňŕííi: ``Öi âűęŕđűńňî˘âŕöü "
-#~ "öĺí˙âű\n"
-#~ "ôŕéë ďŕđîë˙˘?'' Öi ďŕäđűőňŕâŕíű âű äŕ ŕäęŕçó íŕ ăýňű˙ ďűňŕííi?"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m to set the mount point\n"
-#~ msgstr ""
-#~ "Çŕđŕç ěîćíŕ âűçíŕ÷űöü, ˙ęi˙ đŕçäçĺëű âűęŕđűńňî˘âŕöü äë˙ ˘ńňŕë˙âŕíí˙\n"
-#~ "âŕřŕé ńińňýěű Mandrake Linux, ęŕëi ˙íű ˘ćî áűëi çŕäŕäçĺíű (ďđű "
-#~ "ďŕď˙đýäíłě\n"
-#~ "˘ńňŕë˙âŕííł Linux ŕëüáî iířŕé ďđŕöýäóđŕé đŕçáiöö˙). Ó iířűő âűďŕäęŕő\n"
-#~ "đŕçäçĺëű ćîđńňęŕăŕ äűńęó ďŕâiííű áűöü ďŕçíŕ÷ŕíű. Ăýňŕ ŕďĺđŕöű˙ ńęëŕäŕĺööŕ "
-#~ "ç\n"
-#~ "ëŕăi÷íŕăŕ đŕçáiöö˙ äűńęŕâŕé ďđŕńňîđű ęŕěď'ţňýđó íŕ íĺęŕëüęi\n"
-#~ "âîáëŕńöĺé âűęŕđűńňŕíí˙.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëi âű ďëŕíóĺöĺ ńňâŕđŕöü íîâű˙ đŕçäçĺëű, ňŕäű ěîćŕöĺ ńęŕđűńňŕöü đýćűě\n"
-#~ "\"Ŕ˘ňŕ đŕçě˙ř÷ýííĺ\", ęŕá ŕ˘ňŕěŕňű÷íŕ ńňâŕđűöü đŕçäçĺëű GNU/Linux. Âű "
-#~ "ěîćŕöĺ\n"
-#~ "ďŕçíŕ÷űöü äűńę äë˙ đŕçáiöö˙, íŕöińíó˘řű íŕ \"hda\" äë˙ ďĺđřŕăŕ IDE "
-#~ "äűńęó,\n"
-#~ "\"hdb\" äë˙ äđóăîăŕ äűńęó öi \"sda\" äë˙ ďĺđřŕăŕ SCSI äűńęó i ă.ä.\n"
-#~ "\n"
-#~ "\n"
-#~ "Äâŕ çâű÷ŕéíű˙ đŕçäçĺëű íŕńňóďíű˙: ęŕđýííű đŕçäçĺë (/), ˙ęi ç'˙˘ë˙ĺööŕ "
-#~ "ďŕ÷ŕňęîâűě\n"
-#~ "ďóíęňŕě iĺđŕđőii ęŕňŕëŕăࢠôŕéëŕâŕé ńińňýěű, i /boot, ˙ęi çě˙ř÷ŕĺ ˘ńĺ\n"
-#~ "ôŕéëű, íĺŕáőîäíű˙ äë˙ çŕďóńęó ŕďĺđŕöűéíŕé ńińňýěű ďđű ˘ęëţ÷ýííi "
-#~ "ęŕěď'ţňýđó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ďŕęîëüęi âűíięi ăýňŕăŕ ďđŕöýńó çâű÷ŕéíŕ íĺçâŕđîňíű˙, đŕçáiöö¸ íŕ "
-#~ "đŕçäçĺëű\n"
-#~ "ěîćŕ íŕďŕëîőŕöü íŕâi÷ęŕ. DiskDrake ńďđŕř÷ŕĺ ăýňű ďđŕöýń, ňŕěó íŕďđóćŕííĺ\n"
-#~ "ďŕâiííŕ çíiěŕööŕ. Ďŕăë˙äçiöĺ äŕęóěĺíňŕöűţ i ďŕäđűőňóéöĺń˙ ŕäđŕçó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ňŕęńŕěŕ ëţáóţ ŕďĺđŕöűţ íŕä đŕçäçĺëŕě âű ěîćŕöĺ âűęŕíŕöŕü ç äŕďŕěîăŕé\n"
-#~ "ęëŕâi˙ňóđű, íŕďđűęëŕä ďĺđŕě˙ř÷ŕööŕ ďŕěić đŕçäçĺëŕěi ç äŕďŕěîăŕé ęëŕâiřࢠ"
-#~ "Tab\n"
-#~ "i Up/Down. Ęŕëi đŕçäçĺë ŕáđŕíű, âű ěîćŕöĺ âűęŕđűńňî˘âŕöü:\n"
-#~ "\n"
-#~ "- Ctrl-c ęŕá ńňâŕđűöü íîâű đŕçäçĺë (ęŕëi ďŕď˙đýäíĺ ŕáđŕíű ďóńňű "
-#~ "đŕçäçĺë)\n"
-#~ "\n"
-#~ "- Ctrl-d ęŕá âűäŕëiöü đŕçäçĺë\n"
-#~ "\n"
-#~ "- Ctrl-m ęŕá ďŕçíŕ÷űöü ďóíęň ěŕíöiđŕâŕíí˙.\n"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Ŕ˘ňŕłíńňŕë˙öű˙ ôëîďi"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Ŕ˘ňŕěŕňű÷íŕĺ âűçíŕ÷ýííĺ ďŕěĺđࢠýęđŕíó"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Ŕ˘ňŕěŕňű÷íű ďîřóę ďŕěĺđࢠýęđŕíó"
-
-#~ msgid "Available packages"
-#~ msgstr "Äŕńňóďíű˙ ďŕęĺňű"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Äđýííű ńňŕđňŕâű (kickstart) ôŕéë %s (ďŕěűëęŕ %s)"
-
-#~ msgid "Category"
-#~ msgstr "Ęŕňýăîđű˙"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Ďđŕăđŕěű Chat (IRC or instant messaging), ňűďó xchat, licq, gaim ł ă.ä."
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Ďđŕâĺđęŕ çŕëĺćíŕńö˙˘"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "%s or %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ " - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Ŕá˙đűöĺ \"Óńňŕë˙âŕöü\", ęŕëi ˘ âŕń ˙ř÷ý íĺ ˘ńňŕë˙âŕíŕ íi âîäíŕé âĺđńii\n"
-#~ "GNU/Linux, ŕëüáî, ęŕëi âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü íĺęŕëüęi âĺđńi˙˘ öi "
-#~ "äűńňđűáóňűâŕ˘.\n"
-#~ "\n"
-#~ "Ŕá˙đűöĺ \"Âűđŕňŕâŕöü\", ęŕëi âű ćŕäŕĺöĺ âűđŕňŕâŕöü íĺďđŕöóţ÷óţ ďŕď˙đýäíţţ "
-#~ "âĺđńiţ Mandrake Linux:\n"
-#~ "%s ŕëüáî %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕá˙đűöĺ:\n"
-#~ "\n"
-#~ " - Đýęŕěĺíäóĺööŕ: Ęŕëi âű đŕíĺé íięîëi íĺ ˘ńňŕ븢âŕëi \n"
-#~ " GNU/Linux, âűá˙đűöĺ ăýňű đýćűě.\n"
-#~ "\n"
-#~ " - Ďŕ âűáŕđó: Ăýňű đýćűě đýęŕěĺíäóĺööŕ ˘ ňűě âűďŕäęó, ęŕëi âű "
-#~ "ďđŕöŕâŕëi \n"
-#~ " đŕíĺé ç GNU/Linux, i çěîćŕöĺ ńŕěi âűáđŕöü íĺŕáőîäíű˙\n"
-#~ " ďŕęĺňű i ŕáńňŕë˙âŕííĺ äë˙ âŕřŕăŕ ęŕěďóňŕđó. Ăë˙äçiöĺ íićýé "
-#~ "ďŕäđŕá˙çíŕńöł.\n"
-#~ "\n"
-#~ " - Ýęńďĺđň: Âűáŕđ ăýňŕăŕ đýćűěó ńâĺä÷űöü, řňî âű ńâŕáîäíŕ âŕëîäŕĺöĺ GNU/"
-#~ "Linux\n"
-#~ " i ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü âĺëüěi äýňŕë¸âŕĺ Ąńňŕë˙âŕííĺ. ßę i ˘ "
-#~ "âűďŕäęó\n"
-#~ " \"Ďŕ âűáŕđó\"âŕě ďŕňđýáíŕ áóäçĺ âűáđŕöü íĺŕáőîäíű˙ ďđŕăđŕěű i \n"
-#~ " ŕáńňŕë˙âŕííĺ âŕřŕăŕ ęŕěďóňŕđó.\n"
-#~ " Ęŕëi ëŕńęŕ, ÍĹ ŔÁIĐŔÉÖĹ ĂÝŇŰ ĐÝĆŰĚ, ĘŔËI ÍĹ ĄĎÝĄÍĹÍŰ, ŘŇÎ ĐÎÁIÖĹ "
-#~ "ĎĐŔÂIËÜÍŔ!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ " - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Ŕá˙đűöĺ \"Óńňŕë˙âŕöü\", ęŕëi ˘ âŕń ˙ř÷ý íĺ ˘ńňŕë˙âŕíŕ íi ŕäíîé âĺđńii\n"
-#~ "GNU/Linux, ŕëüáî, ęŕëi âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü íĺęŕëüęi âĺđńi˙˘ öi "
-#~ "äűńňđűáóňűâŕ˘.\n"
-#~ "\n"
-#~ "Ŕá˙đűöĺ \"Âűđŕňŕâŕöü\", ęŕëi âű ćŕäŕĺöĺ âűđŕňŕâŕöü íĺďđŕöóţ÷óţ ďŕď˙đýäíţţ "
-#~ "âĺđńiţ Mandrake Linux:\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕá˙đűöĺ:\n"
-#~ "\n"
-#~ " - Đýęŕěĺíäóĺööŕ: Ęŕëi âű đŕíĺé íięîëi íĺ ˘ńňŕ븢âŕëi \n"
-#~ " GNU/Linux, ŕá˙đűöĺ ăýňű đýćűě.\n"
-#~ "\n"
-#~ " - Ďŕ âűáŕđó: Ăýňű đýćűě đýęŕěĺíäóĺööŕ ˘ ňűě âűďŕäęó, ęŕëi âű "
-#~ "ďđŕöŕâŕëi \n"
-#~ " đŕíĺé ç GNU/Linux, i çäîëĺĺöĺ ńŕěi âűáđŕöü íĺŕáőîäíű˙\n"
-#~ " ďŕęĺňű i ŕáńňŕë˙âŕííĺ äë˙ âŕřŕăŕ ęŕěďóňŕđó. Ăë˙äçiöĺ íićýé "
-#~ "ďŕäđŕá˙çíŕńöł.\n"
-#~ "\n"
-#~ " - Ýęńďĺđň: Âűáŕđ ăýňŕăŕ đýćűěó ńâĺä÷űöü, řňî âű ńâŕáîäíŕ âŕëîäŕĺöĺ GNU/"
-#~ "Linux\n"
-#~ " i ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü âĺëüěi äýňŕë¸âŕĺ Ąńňŕë˙âŕííĺ. ßę i ˘ "
-#~ "âűďŕäęó \n"
-#~ " \"Ďŕ âűáŕđó\"âŕě ďŕňđýáíŕ áóäçĺ âűáđŕöü íĺŕáőîäíű˙ ďđŕăđŕěű i \n"
-#~ " ŕáńňŕë˙âŕííĺ âŕřŕăŕ ęŕěďóňŕđó.\n"
-#~ " Ęŕëi ëŕńęŕ, ÍĹ ŔÁIĐŔÉÖĹ ĂÝŇŰ ĐÝĆŰĚ, ĘŔËI ÍĹ ĄĎÝĄÍĹÍŰ, ŘŇÎ ĐÎÁIÖĹ "
-#~ "ĎĐŔÂIËÜÍŔ!\n"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n"
-#~ "Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n"
-#~ "(Helios) or Gold 2000."
-#~ msgstr ""
-#~ "Ŕá˙đűöĺ \"Óńňŕë˙âŕííĺ\", ęŕëi í˙ěŕ ˘ńňŕë˙âŕíűő đŕíĺé âĺđńł˙˘ Linux,\n"
-#~ "ŕëüáî ęŕëi ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü íĺęŕëüęi äűńňđűáóňűâࢠŕëüáî âĺđńű˙˘.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕá˙đűöĺ \"Ŕáíŕâiöü\" ęŕëi âű ćŕäŕĺöĺ ŕáíŕâiöü ďŕď˙đýäíţţ âĺđńiţ\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus),\n"
-#~ "6.1 (Helios) ŕëüáî Gold 2000."
-
-#~ msgid "Collapse all"
-#~ msgstr "Çăŕđíóöü óń¸"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Ńđîäęł ęŕěóíłęŕöű˙˘"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Íŕńňđîéęŕ ńĺňęi (ËÂŃ)"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Íŕńňđîéęŕ ÷ŕńŕâîăŕ ďî˙ńó"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Ďŕäöâĺđäçiöü ďŕđîëü"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Äŕëó÷űööŕ äŕ Iíňýđíýň ďđŕç ęŕáĺëü (ńĺňęó)"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Äŕëó÷űööŕ äŕ iíňýđíýň ďđŕç DSL (öi ADSL)"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Çëó÷ýííĺ ç iíňýđíýň ďŕ ISDN"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Çëó÷ýííĺ ç iíňýđíýň ďđŕç çâű÷ŕéíű ěŕäýě"
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Íĺ ŕňđűěëłâŕĺööŕ ˘ńňŕë˙âŕöü RPM ``bind'' ç äŕďŕěîăŕé urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr ""
-#~ "Íĺ ŕňđűěëłâŕĺööŕ ˘ńňŕë˙âŕöü RPM ęýřóţ÷ŕăŕ ńĺđâĺđó łě¸íࢠç äŕďŕěîăŕé "
-#~ "urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Íĺ ŕňđűěëłâŕĺööŕ ˘ńňŕë˙âŕöü RPM ``dhcp'' ç äŕďŕěîăŕé urpmi."
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Íĺ ŕňđűěëłâŕĺööŕ ˘ńňŕë˙âŕöü RPM ``ipchains'' ç äŕďŕěîăŕé urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Íĺ ŕňđűěëłâŕĺööŕ ˘ńňŕë˙âŕöü RPM ``linuxconf'' ç äŕďŕěîăŕé urpmi."
-
-#~ msgid "Cryptographic"
-#~ msgstr "Ęđűďňŕăđŕôi˙"
-
-#~ msgid "Customized"
-#~ msgstr "Ďŕ âűáŕđó"
-
-#~ msgid "Czech"
-#~ msgstr "×ĺřńęi"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Ńĺđâĺđű ł ęëłĺíňű áŕçࢠäŕäçĺíűő (mysql and postgresql)"
-
-#~ msgid "Directory"
-#~ msgstr "Ęŕňŕëîă"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Íĺ ˘ńňŕ븢âŕöü ńĺňęó"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "Öi ćŕäŕĺöĺ âű íŕńňđîiöü ISDN çëó÷ýííĺ ˘ âŕřŕé ńińňýěĺ?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Öi ćŕäŕĺöĺ âű íŕńňđîiöü ęŕěóňŕâŕíŕĺ çëó÷ýííĺ ďđŕç ěŕäýě äŕ ńińňýěű?"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Öi ćŕäŕĺöĺ âű íŕńňđîiöü ńĺňęŕâóţ ęŕíôiăóđŕöűţ âŕřŕé ńińňýěű?"
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Çŕăđóçęŕ ęđűďňŕăđŕôi÷íűő ďŕęĺňŕ˘"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
-#~ "to use, it will insert it (them) automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX ńďŕ÷ŕňęó ďŕńďđŕáóĺ çíŕéöi ŕäçií öi íĺęŕëüęi ŕäŕďňýđࢠPCI\n"
-#~ "i SCSI. Ęŕëi ŕäŕďňýđ çíîéäçĺí, i DrakX â˙äîěŕ, ˙ęi äđŕéâĺđ\n"
-#~ "äë˙ ˙ăî ďŕňđýáíű, ăýňŕ˙ ďđűëŕäŕ áóäçĺ äŕëó÷ŕíŕ ŕ˘ňŕěŕňű÷íŕ.\n"
-#~ "\n"
-#~ "Ęŕëi âű ěŕĺöĺ SCSI ŕäŕďňýđ íŕ ISA-, ŕëüáî PCI-ęŕđöĺ, ŕëĺ DrakX íĺ âĺäŕĺ\n"
-#~ "˙ęi äđŕéâĺđ ńęŕđűńňŕöü ç ăýňŕé ęŕđňŕé, öi DrakX ëč÷űöü, řňî âű íĺ ěŕĺöĺ\n"
-#~ "SCSI ŕäŕďňýđࢠíŕâîăóë, ó âŕń çŕďűňŕţöü, öi ¸ńöü ¸í ó âŕń ŕëüáî íĺ.\n"
-#~ "Ęŕëi ˘ âŕń ˙ăî í˙ěŕ, ŕäęŕçâŕéöĺ \"Íĺ\". Ęŕëi ¸ńňü ŕäçií öi íĺęŕëüęi,\n"
-#~ "ŕäęŕçâŕéöĺ \"Ňŕę\". Ďŕńë˙ ăýňŕăŕ ç'˙âiööŕ ńďiń äđŕéâĺđŕ˘, ç ˙ęiő âŕě\n"
-#~ "ďŕňđýáíŕ áóäçĺ âűáđŕöü ďŕäűőîäç˙÷ű.\n"
-#~ "\n"
-#~ "Ďŕńë˙ âűáŕđó äđŕéâĺđó, DrakX çŕďűňŕĺ, öi íĺ ćŕäŕĺöĺ âű çŕäŕöü\n"
-#~ "äë˙ ˙ăî äŕäŕňęîâű˙ íŕńňđîéęi. Ńďŕ÷ŕňęó í˙őŕé äđŕéâĺđ ďđŕâĺđűöü "
-#~ "ŕáńňŕë˙âŕííĺ:\n"
-#~ "çâű÷ŕéíŕ ˘ń¸ ďđŕöóĺ äîáđŕ.\n"
-#~ "\n"
-#~ "Ó ŕäâŕđîňíűě âűďŕäęó, íĺ çŕáűâŕéöĺń˙ ďđŕ iíôŕđěŕöűţ ŕá ŕáńňŕë˙âŕííi, "
-#~ "˙ęóţ\n"
-#~ "ěîćíŕ ŕňđűěŕöü ŕä Windows (ęŕëi ˙íŕ ďđűńóňíi÷ŕĺ ˘ âŕřŕé ńińňýěĺ), ŕ "
-#~ "ňŕęńŕěŕ\n"
-#~ "ďđŕ äŕďŕěîćíię ďŕ ˘ńňŕííł ăýňŕé ďđűëŕäű. ßíű çě˙ř÷ŕţöü ňű˙ íŕńňđîéęi, "
-#~ "˙ęi˙\n"
-#~ "íĺŕáőîäíŕ çŕäŕöü äđŕéâĺđó."
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX ńňâîđűöü ęŕíôiăóđŕöűéíű˙ ôŕéëű äë˙ XFree 3.3 i XFree 4.0.\n"
-#~ "Ďŕ äŕěŕ˘ëĺííţ âűęŕđűńňî˘âŕĺööŕ ńĺđâĺđ 4.0. Ęŕëi Âŕřŕ âiäýŕęŕđňŕ íĺ\n"
-#~ "ďŕäňđűěëiâŕĺööŕ iě, ňŕäű ěîćíŕ âűęŕđűńňŕöü ńĺđâĺđ 3.3.\n"
-#~ "Öi ćŕäŕĺööĺ âű ďŕęiíóöü XFree 3.3 ˘ ńińňýěĺ?"
-
-#~ msgid "ECI modem"
-#~ msgstr "Ěŕäýě ECI"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Óęëţ÷ýííĺ num lock ďđű ńňŕđöĺ"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Óńňŕ˘öĺ äűńęĺňó äë˙ çŕďińó çŕăđóç÷űęó ç HTP\n"
-#~ "(óńĺ äŕäçĺíű˙ íŕ ăýňŕé äűńęĺöĺ áóäóöü çíiř÷ŕíű)"
-
-#~ msgid "Everything configured!"
-#~ msgstr "Ąń¸ ńęŕíôiăóđŕâŕíŕ!"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Óń¸ ńęŕíôiăóđŕâŕíŕ.\n"
-
-#~ msgid "Expand all"
-#~ msgstr "Đŕçăŕđíóöü óń¸"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "Íĺ ŕňđűěŕëŕńü ńňâŕđűöü çŕăđ. äűńęĺňó ç HTP.\n"
-#~ "Ěŕă÷űěŕ, ďŕňđýáíŕ ďĺđŕçŕďóńöiöü óńňŕë˙âŕííĺ ç ``%s'' ó çŕďđŕřýííi"
-
-#~ msgid "Find Package"
-#~ msgstr "Ďîřóę ďŕęĺňŕ˘"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Çíŕéńöi ďŕęĺň, ˙ęi ěŕĺ ôŕéë"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Ďîřóę ëińňî˘"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Ďîřóę ëińňî˘ ďŕňđŕáóĺ íĺęŕňîđű ÷ŕń"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Äë˙ FTP i HTTP, âű ďŕâiííű ďŕçíŕ÷űöü đŕçě˙ř÷ýííĺ hdlist\n"
-#~ "Çŕäŕâŕéöĺ ŕäíîńíŕ đŕíĺé ďŕçíŕ÷ŕíŕăŕ URL"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Çŕáűöü çě˙íĺííi?"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linux ěîćŕ ďđŕöŕâŕöü ńŕ řěŕňëięiěi ňűďŕěi äđóęŕâŕëüíűő ďđűëŕäŕ˘. Ęîćíű ç "
-#~ "ăýňűő\n"
-#~ "ňűďࢠďŕňđŕáóĺ đîçíŕăŕ ˘ńňŕë˙âŕíí˙.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëi âŕřŕ ďđűëŕäŕ äë˙ äđóęŕâŕíí˙ äŕëó÷ŕíŕ íĺďŕńđýäíŕ äŕ ăýňŕăŕ "
-#~ "ęŕěď'ţňýđó,\n"
-#~ "ŕá˙đűöĺ \"Ëŕęŕëüíű ďđűíňýđ\". Âŕě áóäçĺ ďŕňđýáíŕ âűçíŕ÷űöü, äŕ ˙ęîăŕ "
-#~ "ďîđňó\n"
-#~ "äŕëó÷ŕíŕ ďđűëŕäŕ i âűáđŕöü ďŕäűőîäç˙÷ű ôiëüňđ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëi âű ćŕäŕĺöĺ ŕňđűěŕöü äîńňóď äŕ ďđűíňýđó, ˙ęi çíŕőîäçiööŕ íŕ "
-#~ "ŕääŕëĺíŕé\n"
-#~ "ěŕřűíĺ Unix, íĺŕáőîäíŕ âűáđŕöü \"Ŕääŕëĺíŕ˙ ÷ŕđăŕ lpd\". Ęŕá ďđűěóńiöü "
-#~ "˙ăî\n"
-#~ "ďđŕöŕâŕöü, iě˙ i ďŕđîëü íĺ ďŕňđýáíű, ŕëĺ íĺŕáőîäíŕ âĺäŕöü iě˙ ÷ŕđăi "
-#~ "äđóęó\n"
-#~ "íŕ ăýňŕě ńĺđâĺđű.\n"
-#~ "\n"
-#~ "\n"
-#~ "Äë˙ äîńňóďó äŕ ďđűíňýđó SMB (˙ęi çíŕőîäçiööŕ íŕ ŕääŕëĺíŕé ěŕřűíĺ\n"
-#~ "Windows 9x/NT/2000 öi Unix ç ńĺđâĺđŕě Samba), íĺŕáőîäíŕ âĺäŕöü ˙ăî iě˙\n"
-#~ "SMB (˙ęîĺ ěîćŕ íĺ ńóďŕäŕöü ç ˙ăî iěĺíĺě ó ńĺňęi TCP/IP), i, ěŕă÷űěŕ,\n"
-#~ "˙ăî IP ŕäđŕń i iě˙ ęŕđűńňŕëüíięó, đŕáî÷ŕé ăđóďű i ďŕđîëü äîńňóďó äŕ\n"
-#~ "ďđűíňýđó, ŕ ňŕęńŕěŕ iě˙ ďđűíňýđó. Ňîĺ ć ńŕěŕĺ i äë˙ ďđűíňýđó\n"
-#~ "NetWare, ňîëüęi íĺ ďŕňđŕáóĺööŕ iíôŕđěŕöű˙ ŕá ďđŕöîóíŕé ăđóďĺ."
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (ďŕńë˙äî˘íŕ˙)"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Í˙ěĺöęi (1TR6)"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Äŕéöĺ iě˙ (íŕďđ.: `extra', `commercial')"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr ""
-#~ "Áóäçĺ ˘ńňŕë˙âŕíŕ %d Má. Ěîćíŕ ŕáđŕöü áîëüř ďđŕăđŕěࢠäë˙ ˘ńňŕë˙âŕíí˙."
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Áóäçĺě âűäŕë˙öü ďóíęň %s"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "SILO çě˙ř÷ŕĺ íŕńňóďíű˙ ďóíęňű.\n"
-#~ "Âű ěîćŕöĺ äŕäŕöü ˙ř÷ý, ŕëüáî çě˙íiöü ińíóţ÷ű˙."
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Ěîćíŕ ďŕńďđŕáŕâŕöü çíŕéńöi äŕńňóďíű˙ ďŕěĺđű ýęđŕíó (íŕďđ.: 800x600).\n"
-#~ "Ó âĺëüěi đýäęiě âűďŕäęó ăýňŕ ěîćŕ ďđűâĺńöi äŕ ńďűíĺíí˙ ęŕěď'ţňŕđó .\n"
-#~ "Ćŕäŕĺöĺ ďŕńďđŕáŕâŕöü?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Çíŕéřëi ISDN ęŕđňó:\n"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Íĺŕáőîäíŕ ŕäęŕíôiăóđŕâŕöü âŕřó ńĺňęŕâóţ ęŕđňó, ęŕá ěŕă÷űěŕ áűëî äŕëó÷űööŕ "
-#~ "äŕ Iíňýđíýňó."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Ęŕëi DrakX ďđŕâiëüíŕ çíŕéřî˘ âŕřó ěűř, ďđîńňŕ âűá˙đűöĺ ç ěĺíţ\n"
-#~ "iířű ďóíęň. Ó ďđîöiëĺăëűě âűďŕäęó ŕá˙đűöĺ ďŕäűőîäç˙÷ű âŕđű˙íň\n"
-#~ "äđŕéâĺđó ěűřű ńŕ ńďińó âűřýé.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ó âűďŕäęó ěűřű, ˙ęŕ˙ äŕëó÷ŕíŕ äŕ ďŕńë˙äî˘íŕăŕ ďîđňó, âŕě ďŕňđŕáóĺööŕ "
-#~ "ďŕâĺäŕěiöü\n"
-#~ "DrakX ďđŕâiëüíű íóěŕđ ďŕńë˙äî˘íŕăŕ ďîđňó, äŕ ˙ęîăŕ ˙íŕ äŕëó÷ŕíŕ."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Ęŕëi âŕř ADSL ěŕäýě ŕäíŕ ç ěŕäýë˙˘ Alcatel, ďŕçíŕ÷öĺ Alcatel. Ó iířűě "
-#~ "âűďŕäęó - ECI."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "ßęŕ˙ ęđŕiíŕ âŕřŕăŕ đŕçě˙ř÷ýíí˙?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Óńňŕë˙âŕííĺ/Âűđŕňŕâŕííĺ"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Óńňŕë˙âŕííĺ SILO íĺ ŕňđűěŕëŕń˙. Óçíięëŕ íŕńňóďíŕ˙ ďŕěűëęŕ:"
-
-#~ msgid "Installed packages"
-#~ msgstr "Óńňŕë˙âŕíű˙ ďŕęĺňű"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Íĺŕáőîäíŕ ďĺđŕçŕďóńöiöü óńňŕë˙âŕííĺ i çŕăđóçiööŕ ç äűńęĺňű"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Íĺŕáőîäíŕ ďĺđŕçŕďóńöiöü óńňŕë˙âŕííĺ ç íîâűěi ďŕđŕěĺňđŕěi"
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "Íŕńňîéëiâŕ đýęŕěĺíäóĺě ŕäęŕçŕöü ňóň \"Ňŕę\"! Âîńü íŕďđűęëŕä, ęŕëi âű\n"
-#~ "ďĺđŕ˘ńňŕëţĺöĺ Windows, ˙íŕ ďĺđŕçŕďiřŕ çŕăđóçŕ÷íű ńĺęňŕđ.\n"
-#~ "Ęŕëi âű íĺ ńňâŕđűëi çŕăđóçŕ÷íű äűńę, âű áîëüř íĺ çäîëĺĺöĺ çŕăđóçiöü\n"
-#~ "Linux!"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (ďŕńë˙äî˘íŕ˙)"
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) ěîćŕ çŕăđóćŕöü Linux i iířű˙ ŕďĺđŕöűéíű˙ ńińňýěű.\n"
-#~ "Çâű÷ŕéíŕ ˙íű ęŕđýęňíŕ çíŕőîäç˙ööŕ ďđű ˘ńňŕë˙âŕííł. Ęŕëi âű íĺ ˘áŕ÷űëi\n"
-#~ "ňűő ńińňýě, ˙ęi˙ áűëi ˘ńňŕë˙âŕíű íŕ ěŕřűíĺ, âű ěîćŕöĺ äŕäŕöü çŕđŕç\n"
-#~ "ŕäíó ç iő ŕëüáî íĺęŕëüęi.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëi âű íĺ ćŕäŕĺöĺ, ęŕá óńĺ ěĺëi äîńňóď äŕ ŕäíîé ç iő, âűäŕëiöĺ ˙ĺ çŕđŕç\n"
-#~ "(äçĺë˙ ˙ĺ çŕăđóçęi ďŕňđŕáóĺööŕ çŕăđóçŕ÷íű äűńę)."
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Ëiíĺéíŕ (íĺŕáőîäíŕ äë˙ íĺęŕňîđűő ŕäŕďňýđࢠSCSI)"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66 HPT.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "Linux ďŕęóëü ˙ř÷ý íĺ öŕëęŕě ďŕäňđűěëiâŕĺ ultra dma 66 HPT.\n"
-#~ "ßę âŕđű˙íň, ěŕăó ńňâŕđűöü äűńęĺňó, ˙ęŕ˙ çŕá˙ńďĺ÷űöü äîńňóď äŕ äűńęó íŕ "
-#~ "ide2 i ide3"
-
-#~ msgid "Local LAN"
-#~ msgstr "Ëŕęŕëüíŕ˙ ńĺňęŕ"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Ëŕęŕëüíű ďđűíňýđ (URI)"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Íŕńňđîéęi ëŕęŕëüíŕé ńĺňęi óćî çŕäŕäçĺíű.\n"
-#~ "Öi ćŕäŕĺöĺ Âű:"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (ďŕńë˙äî˘íŕ˙)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (ďŕńë˙äî˘íŕ˙)"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (ďŕńë˙äî˘íŕ˙)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A ŕëüáî âűřĺé (ďŕńë˙äî˘íŕ˙)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft ńóě˙ńöiěŕ˙ (ďŕńë˙äî˘íŕ˙)"
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Ďŕâĺđíłöĺ ęîëŕ ěűřű"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "cdrom íĺäŕńňóďíű (íi÷îăŕ í˙ěŕ ˘ /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "Íĺ çíîéäçĺíŕ"
-
-#~ msgid "No more match"
-#~ msgstr "Áîëüř íĺ çíîéäçĺíŕ"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Ďŕäűőîäç˙÷ű˙ đýćűěű íĺ çíîéäçĺíű.\n"
-#~ "Ďŕńďđŕáóéöĺ âűáđŕöü iířóţ âiäýŕęŕđňó öi ěŕíiňîđ"
-
-#~ msgid "Other countries"
-#~ msgstr "Iířű˙ ęđŕiíű"
-
-#~ msgid "Package"
-#~ msgstr "Ďŕęĺň"
-
-#~ msgid "Password:"
-#~ msgstr "Ďŕđîëü:"
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "ßęi đŕçäçĺë äűńęŕ ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü ó ˙ęŕńöi ęŕđŕí¸âŕăŕ?"
-
-#~ msgid ""
-#~ "Please choose which network adaptater do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "Ęŕëi ëŕńęŕ, ďŕçíŕ÷öĺ ńĺňęŕâű ŕäŕďňŕđ, ˙ęi âű áóäçĺöĺ âűęŕđűńňî˘âŕöü äçĺë˙ "
-#~ "äŕëó÷ýíí˙ äŕ Iíňýđíýňó.\n"
-#~ "Ęŕëi íĺ âĺäŕĺöĺ, ďŕçíŕ÷öĺ eth0.\n"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Ďđŕäńňŕ˘öĺ íŕńňóďíóţ iíôŕđěŕöűţ"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Ďĺđŕęŕíôiăóđŕâŕöü ëŕęŕëüíóţ ńĺňęó"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Rescue"
-#~ msgstr "Âűđŕňŕâŕííĺ"
-
-#~ msgid "SILO main options"
-#~ msgstr "Ăŕëî˘íű˙ îďöűi SILO"
-
-#~ msgid "Sciences"
-#~ msgstr "Íŕâóęîâŕĺ"
-
-#~ msgid "Search"
-#~ msgstr "Ďîřóę"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Ďîřóę ęŕđŕí¸âŕăŕ đŕäçĺëŕ."
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Ŕá˙đűöĺ ďŕćŕäŕíű ďŕěĺđ óńňŕë˙âŕíí˙"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Ŕá˙đűöĺ:\n"
-#~ "\n"
-#~ " - Đýęŕěĺíäóĺööŕ: Ęŕëi âű đŕíĺé íięîëi íĺ ˘ńňŕ븢âŕëi Linux.\n"
-#~ "\n"
-#~ " - Ďŕ âűáŕđó: Ęŕëi âű çíŕ¸ěű˙ ç Linux, ňî ěîćíŕ ŕáđŕöü íŕńňóďíű˙ \n"
-#~ "ńďîńŕáű âűęŕđűńňŕíí˙ ńińňýěű: íŕđěŕëüíű, äë˙ đŕńďđŕöî˘ř÷űęŕ, ŕëüáî\n"
-#~ "ńĺđâĺđ. Ŕá˙đűöĺ \"Çâű÷ŕéíű\" äë˙ ˘ńňŕë˙âŕíí˙ ńińňýěű ŕăóëüíŕăŕ "
-#~ "ďđűçíŕ÷ýíí˙.\n"
-#~ "Đýćűě \"Äë˙ đŕńďđŕöî˘ęi\" ďđűçíŕ÷ŕíű äë˙ ňűő, őňî âűęŕđűńňî˘âŕĺ "
-#~ "ęŕěď'ţňýđ\n"
-#~ "ěĺíŕâiňŕ äë˙ đŕńďđŕöî˘ęi ďđŕăđŕěŕ˘. Ęŕëi âű ćŕäŕĺöĺ ˘ńňŕë˙âŕöü ńĺđâĺđ "
-#~ "ŕăóëüíŕăŕ\n"
-#~ "ďđűçíŕ÷ýíí˙ (äë˙ ďîřňű, äđóęó, ...), ňŕäű ŕá˙đűöĺ \"Ńĺđâĺđ\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ýęńďĺđň: Ęŕëi âű ńâŕáîäíŕ âŕëîäŕĺöĺ GNU/Linux i ćŕäŕĺöĺ ďđŕâĺńöi\n"
-#~ "˘ńňŕë˙âŕííĺ ç ďŕăëűáëĺííŕé íŕńňđîéęŕé, ăýňű Ęëŕń Óńňŕë˙âŕíí˙ - äë˙ âŕń.\n"
-#~ "Âű ňŕęńŕěŕ çěîćŕöĺ ŕáđŕöü ďđűçíŕ÷ýííĺ ńińňýěű, ˙ę ó âŕđű˙íöĺ \"Ďŕ âűáŕđó"
-#~ "\"."
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Íŕńňđîéęŕ SCSI"
-
-#~ msgid "Show less"
-#~ msgstr "Ďŕęŕçŕöü ěĺíĺé"
-
-#~ msgid "Show more"
-#~ msgstr "Ďŕęŕçŕöü áîëĺé"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Ďŕęŕçŕöü óńĺ ëińňű"
-
-#~ msgid "Shutting down"
-#~ msgstr "Âűęëţ÷ýííĺ ęŕěď'ţňýđó"
-
-#~ msgid "Size: %d MB"
-#~ msgstr "Ďŕěĺđ: %d MB"
-
-#~ msgid "Size: %d MB\n"
-#~ msgstr "Ďŕěĺđ: %d MB\n"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Ďŕěĺđ: %s Má"
-
-#~ msgid "Slovakian"
-#~ msgstr "Ńëŕâŕöęi"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "Ěŕëű (%dMá)"
-
-#~ msgid "Socket"
-#~ msgstr "Ńîęĺň"
-
-#~ msgid "Sort by"
-#~ msgstr "Óďŕđŕäęŕâŕöü ďŕ"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Âűęŕđűńňî˘âŕöü óńţ äűńęŕâóţ ďđŕńňîđó"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Íŕńňóďíű˙ ďŕęĺňű áóäóöü âűäŕëĺíű ç ńińňýěű"
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Çŕđŕç ďŕ÷íĺööŕ ˘ńňŕë˙âŕíüí˙ ŕáđŕíűő ďŕęĺňŕ˘. Ăýňŕ˙ ŕďĺđŕöű˙ ŕäűěĺ\n"
-#~ "íĺęŕëüęi őâiëiíࢠ÷ŕńó, ęŕëi âű íĺ ŕáđŕëi ŕáíŕ˘ëĺííĺ ińíóţ÷ŕé ńińňýěű,\n"
-#~ "áî ó ŕďîříiě âűďŕäęó řěŕň ÷ŕńó ďŕňđŕáóĺööŕ ˙ř÷ý äŕ ďŕ÷ŕňęó ŕáíŕ˘ëĺíí˙\n"
-#~ "ęŕá ďđŕŕíŕëiçŕâŕöü ńińňýěó."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Ăýňŕ˙ ěĺňęŕ ˘ćî âűęŕđűńňî˘âŕĺööŕ"
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Ăýňű đŕçäçĺë ďđűńâĺ÷ŕíű íŕńňđîéöű ëŕęŕëüíŕé ńĺňęi,\n"
-#~ "(LAN), ŕëüáî ěŕäýěŕ. \n"
-#~ "\n"
-#~ "Ŕá˙đűöĺ \"Ëŕęŕëüíŕ˙ ńĺňęŕ\" i DrakX ďŕńďđŕáóĺ çíŕéöi\n"
-#~ "íŕ âŕřŕé ěŕřűíĺ ŕäŕďňýđ Ethernet. Ŕäŕďňýđű PCI ďŕâiííű áűöü çíîéäçĺíű\n"
-#~ "i íŕńňđîĺíű ŕ˘ňŕěŕňű÷íŕ. Ŕäíŕę, ďđű ńęŕđűńňŕííi ISA,\n"
-#~ "ŕ˘ňŕçíŕőîäćŕííĺ íĺ ďđŕöóĺ, i âŕě ďđűéäçĺööŕ âűáiđŕöü äđŕéâĺđ\n"
-#~ "ńŕ ńďińó, ˙ęi ç'˙âiööŕ ďĺđŕä âŕ÷űěŕ ˘ ăýňűě âűďŕäęó.\n"
-#~ "\n"
-#~ "\n"
-#~ "ßę i äë˙ ŕäŕďňýđࢠSCSI, âű ěîćŕöĺ äŕçâîëiöü äđŕéâĺđó ďđŕâĺđűöü\n"
-#~ "ďđűëŕäó ńŕěŕńňîéíŕ, iíŕęř ďđűéäçĺööŕ çŕäŕâŕöü äđŕéâĺđó íŕńňđîéęi,\n"
-#~ "˙ęi˙ âű çíîéäçĺööĺ ˘ äŕęóěĺíňŕöűi ďŕ âŕřŕěó ŕáńňŕë˙âŕííţ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ďđű ˘ńňŕë˙âŕííł Mandrake Linux íŕ ęŕěď'ţňýđ, ˙ęi ďđŕöóĺ âŕ ˘ćî\n"
-#~ "íŕëŕäćŕíŕé ńĺňöű, ŕäěiíińňđŕňŕđó ńĺňęi ďđűéäçĺööŕ ďŕâĺäŕěiöü\n"
-#~ "âŕě óńţ íĺŕáőîäíóţ iíôŕđěŕöűţ (IP ŕäđŕń, ěŕńęŕ ďŕäńĺňęi\n"
-#~ "öi ńęŕđî÷ŕíŕ ďŕäěŕńęŕ, i iě˙ őŕńňŕ). Ęŕëi âű ńňâŕđŕĺöĺ\n"
-#~ "ďđűâŕňíóţ ńĺňęó, íŕďđűęëŕä äîěŕ, âű ďŕâiííű âűáđŕöü\n"
-#~ "óńĺ íŕńňđîéęi ńŕěŕńňîéíŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕá˙đűöĺ \"Çëó÷ýííĺ ďđŕç ěŕäýě\" äë˙ íŕńňđîéęi çëó÷ýíí˙\n"
-#~ "ç ńóńâĺňíŕé ăëŕáŕëüíŕé ńĺňęŕé Internet ďđŕç ěŕäýě. DrakX ďŕńďđŕáóĺ\n"
-#~ "çíŕéńöi âŕř ěŕäýě, ŕëĺ ęŕëi ˘ ˙ăî ăýňŕ íĺ ŕňđűěŕĺööŕ, âŕě áóäçĺ\n"
-#~ "ďŕňđýáíŕ ńŕěŕńňîéíŕ ďŕçíŕ÷űöü ńĺđűéíű ďîđň, äŕ ˙ęîăŕ äŕëó÷ŕíű ěŕäýě."
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "×ŕń (ń˙ę) íĺŕęňű˘íŕńöi, ďŕńë˙ ˙ęîăŕ\n"
-#~ "âĺřŕöü ńëóőŕ˘ęó. (Ďŕęiíüöĺ ďóńňîĺ, ęŕá ŕäě˙íiöü)"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Äë˙ ďîřóęó ďŕäűőîäç˙÷űő ďŕěĺđࢠýęđŕíó çŕđŕç ďŕńďđŕáóĺě đîçíű˙ đýćűěű. \n"
-#~ "Âŕř ýęđŕí áóäçĺ ěiăŕöü... Ęŕëi âŕě íĺ ďŕäŕáŕĺööŕ ěiăŕííĺ, ˙ăî ěîćíŕ \n"
-#~ "ŕäęëţ÷űöü, ňŕäű ďŕńë˙ çŕęŕí÷ýíí˙ áóäçĺ ÷óâŕöü ăóäîę."
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Ďĺđŕęëţ÷űöü Óńňŕë˙âŕíŕ/Äŕńňóďíŕ"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "Âűáđŕíŕ çŕřěŕň ďŕęĺňŕ˘: %dMá íĺ ˘ëŕçiöü ó %dMá"
-
-#~ msgid "Tree"
-#~ msgstr "Äđýâŕ"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Ďŕńďđŕáŕâŕöü çíŕéńöi %s ďđűëŕäű?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Ďŕńďđŕáŕâŕöü çíŕéńöi PCI ďđűëŕäű?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Ďŕńďđŕáŕâŕöü çíŕéńöi ęŕđňű PCMCIA?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Ďŕńďđŕáŕâŕöü çíŕéńöi ěŕäýě?"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI äë˙ ëŕęŕëüíŕăŕ ďđűíňýđó"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL ęŕňŕëîăŕ, ˙ęi çě˙ř÷ŕĺ RPM"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Ěűř (3 ęíîďęi öi áîëĺé)"
-
-#~ msgid "Update location"
-#~ msgstr "Çě˙íiöü ęđűíiöó"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Ŕäíŕ˘ëĺííĺ áŕçű ďŕęĺňࢠRPM"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Âűęŕđűńňî˘âŕöü ďŕđîëi MD5"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Âűęŕđűńňî˘âŕöü DiskDrake"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Âűęŕđűńňî˘âŕöü öĺí˙âű ôŕéë"
-
-#~ msgid "User name:"
-#~ msgstr "Iě˙ ęŕđűńňŕëüíięó:"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "Äŕ ˙ęîăŕ ďîđňó äŕëó÷ŕíű âŕř ďđűíňýđ \n"
-#~ "(/dev/lp0 ýęâiâŕëĺíňíű LPT1:)?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Řňî âű ćŕäŕĺöĺ çíŕéńöł?"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Řňî âű őî÷ŕöĺ çđŕáiöü?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "ßęi ňűď âŕřŕé ěűřű?"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "ßęi ňűď âŕřŕé ęëŕâi˙ňóđű?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Äçĺë˙ ÷ŕăî Âű áóäçĺöĺ âűęŕđűńňî˘âŕöü ńłńňýěó?"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "ßęîĺ âűęŕđűńňŕííĺ ŕáiđŕĺöĺ?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "ßęi ďŕ÷ŕňęîâű çŕăđóç÷űę âű ćŕäŕĺöĺ âűęŕđűńňî˘âŕöü?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "ßęi ôŕéë âű řóęŕĺöĺ?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "ßęi˙ ďŕęĺňű řóęŕĺě"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "ßęi ňűď đŕçäçĺëó âŕě ďŕňđýáíű?"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Äŕ ˙ęîăŕ ďîńë˙äî˘íŕăŕ ďîđňó äŕëó÷ŕíŕ âŕřŕ ěűř?"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Ó âŕń íĺ őŕďŕĺ ěĺńöŕ äë˙ Lnx4win"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Âű íĺ ěŕĺöĺ ŕíi˙ęiő Windows đŕçäçĺëŕ˘!"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Çŕđŕç ěîćíŕ ŕáđŕöü ďŕęĺňű ďđŕăđŕě, ˙ęi˙ âű ćŕäŕĺöĺ ˘ńňŕë˙âŕöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ďŕ-ďĺđřŕĺ, âű ěîćŕöĺ ŕáđŕöü ăđóďó ďŕęĺňࢠęŕá óńňŕë˙âŕöü öi ŕáíŕâiöü. "
-#~ "Ďŕńë˙\n"
-#~ "âű ěîćŕöĺ ŕäçíŕ÷űöü áîëüř ďŕęĺňࢠó ŕäďŕâĺäíŕńöi ç ˙ăóëüíűě ďŕěĺđŕě, ˙ęi\n"
-#~ "âű ćŕäŕĺöĺ ŕáđŕöü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęŕëi âű ďđŕöóĺöĺ ˘ đýćűěĺ ýęńďĺđňó, ňŕäű ďŕęĺňű ěîćíŕ ŕáiđŕöü "
-#~ "iíäűâiäóŕëüíŕ.\n"
-#~ "Ěŕéöĺ íŕ ˘âŕçĺ, řňî íĺęŕňîđű˙ ďŕęĺňű ďŕňđŕáóţöü óńňŕë˙âŕíí˙ iířűő "
-#~ "ďŕęĺňŕ˘.\n"
-#~ "Ăýňŕ çŕâĺööŕ çŕëĺćíŕńööţ ďŕęĺňŕ˘. Ďŕęĺňű, ˙ęi˙ âű ŕáđŕëi, i ďŕęĺňű,\n"
-#~ "ŕä ˙ęiő ˙íű çŕëĺćŕöü, áóäóöü ŕ˘ňŕěŕňű÷íŕ ŕáđŕíű äçĺë˙ ˘ńňŕë˙âŕíí˙.\n"
-#~ "Íĺěŕă÷űěŕ ˘ńňŕë˙âŕöü ďŕęĺň äŕ ˘ńňŕë˙âŕíí˙ ˘ńiő ďŕęĺňŕ˘, ŕä ˙ęiő ¸í "
-#~ "çŕëĺćűöü."
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Âŕř ęŕęěď'ţňýđ ěîćŕ áűöü ńęŕíôiăóđŕâŕíű äŕ ńóěĺńíŕăŕ Iíňýđíýň-çëó÷ýíí˙.\n"
-
-#~ msgid "automagic"
-#~ msgstr "ŕ˘ňŕěŕăi÷íű"
-
-#~ msgid "beginner"
-#~ msgstr "ďŕ÷űíŕţ÷ű"
-
-#~ msgid "brunette"
-#~ msgstr "áđóíĺň"
-
-#~ msgid "changing type of"
-#~ msgstr "Çě˙íĺííĺ ňűďó"
-
-#~ msgid "default"
-#~ msgstr "Ďŕ äŕěŕ˘ëĺííţ"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "íĺ âűęŕđűńňî˘âŕöü pppoe"
-
-#~ msgid "girl"
-#~ msgstr "äç˙˘÷űíŕ"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (âŕćíŕ)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (äîáđŕ)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (âĺëüěi äîáđŕ)"
-
-#~ msgid "linear"
-#~ msgstr "Ëiíĺéíŕ"
-
-#~ msgid "loopback"
-#~ msgstr "Âiđňóŕëüíŕ˙ ôŕéëŕâŕ˙ ńińňýěŕ (loopback)"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "ďŕěűëęŕ ěŕíöiđŕâŕíí˙ nfs"
-
-#~ msgid "pptp alcatel"
-#~ msgstr "pptp alcatel"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake çŕđŕç ó đýćűěĺ ``low memory''.\n"
-#~ "rpmdrake áóäçĺ ďĺđŕçŕďóř÷ŕíű äçĺë˙ çŕáĺńď˙÷ýíí˙ ďîřóęó ôŕéëŕ˘"
-
-#~ msgid "tie"
-#~ msgstr "ăŕëüřňóę"
-
-#~ msgid "woman-blond"
-#~ msgstr "ćŕí÷űíŕ-áëŕíäűíęŕ"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
deleted file mode 100644
index 7bea7e548..000000000
--- a/perl-install/share/po/bg.po
+++ /dev/null
@@ -1,13898 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999, 2000 MandrakeSoft
-# Elena Radeva <ely@triada.bg>, 1999.
-# Pavel Cholakov <pavel@linux.home.bg>, 1999.
-# Boyan Ivanov <boyan17@bulgaria.com>, 1999, 2000
-# Bozhan Boiadzhiev <bozhan@plov.omega.bg>, 2000
-# Valery Dachev <valery@zonebg.com>, 2000, 2001
-#
-# Bulgarians on Linux use windows-1251 encoding
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-08-15 15:29+0200\n"
-"Last-Translator: Valery Dachev <valery@zonebg.com>\n"
-"Language-Team: Bulgarian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=windows-1251\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Čçďîëçâŕé đŕçřčđĺíčĺňî Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Íŕńňđîéęŕ ńŕěî íŕ ęŕđňŕ \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Ăđŕôč÷íŕ ęŕđňŕ"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Čçáĺđĺňĺ ăđŕôč÷íŕ ęŕđňŕ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Čçáĺđĺňĺ X ńúđâúđ"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X ńúđâúđ"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Čçáĺđĺňĺ X ńúđâúđ"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X ńúđâúđ"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ęî˙ íŕńňđîéęŕ íŕ XFree čńęŕňĺ äŕ čěŕňĺ ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ęŕđňŕňŕ âč ěîćĺ äŕ čěŕ ďîääđúćęŕ íŕ őŕđäóĺđíî 3D óńęîđĺíčĺ, íî ńŕěî ń Xfree %"
-"s.\n"
-"Ęŕđňŕňŕ âč ńĺ ďîääúđćŕ îň XFree %s, ęîéňî ěîćĺ äŕ čěŕ ďî-äîáđŕ ďîääđúćęŕ íŕ "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Ęŕđňŕňŕ âč ěîćĺ äŕ čěŕ ďîääđúćęŕ íŕ őŕđäóĺđíî 3D óńęîđĺíčĺ â XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ń őŕđäóĺđíî 3D óńęîđĺíčĺ"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ęŕđňŕňŕ âč ěîćĺ äŕ čěŕ ďîääđúćęŕ íŕ őŕđäóĺđíî 3D óńęîđĺíčĺ ń XFree %s.\n"
-"ÎŇÁĹËĹĆĹŇĹ, ×Ĺ ŇÎÂŔ Ĺ ĹĘŃĎĹĐČĚĹÍŇŔËÍŔ ĎÎÄÄĐÚĆĘŔ Č ĘÎĚĎŢŇÚĐÚŇ ÂČ ĚÎĆĹ ÄŔ "
-"ÇŔÁČĹ."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ń ĹĘŃĎĹĐČĚĹÍŇŔËÍO őŕđäóĺđíî 3D óńęîđĺíčĺ"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ęŕđňŕňŕ âč ěîćĺ äŕ čěŕ ďîääđúćęŕ íŕ őŕđäóĺđíî 3D óńęîđĺíčĺ, íî ńŕěî ń XFree %"
-"s,\n"
-"ÎŇÁĹËĹĆĹŇĹ, ×Ĺ ŇÎÂŔ Ĺ ĹĘŃĎĹĐČĚĹÍŇŔËÍŔ ĎÎÄÄĐÚĆĘŔ Č ĚÎĆĹ ÄŔ ÇŔÁČĹ ĘÎĚĎŢŇÚĐŔ "
-"ÂČ.\n"
-"Ęŕđňŕňŕ âč ńĺ ďîääúđćŕ îň XFree %s, ęîéňî ěîćĺ äŕ čěŕ ďî-äîáđŕ ďîääđúćęŕ íŕ "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (číńňŕëŕöč˙ ăđŕôč÷ĺí äđŕéâĺđ)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Íŕńňđîéęŕ íŕ XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Čçáĺđĺňĺ ęŕďŕöčňĺň íŕ ďŕěĺňňŕ íŕ ăđŕôč÷íŕňŕ ńč ęŕđňŕ"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Čçáĺđĺňĺ îďöčč çŕ ńúđâúđŕ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Čçáĺđĺňĺ ěîíčňîđ"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Ěîíčňîđ"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Äâŕňŕ ęđčňč÷íč ďŕđŕěĺňúđŕ ńŕ âĺđňčęŕëíŕňŕ ńęîđîńň íŕ âúçńňŕíîâ˙âŕíĺ, ęî˙ňî "
-"îňđŕç˙âŕ ńęîđîńňňŕ, \n"
-"ń ęî˙ňî öĺëč˙ň ĺęđŕí ńĺ âúçńňŕíîâ˙âŕ, č íŕé-âŕćíîňî - őîđčçîíňŕëíŕňŕ\n"
-"ńčíőđîíčçŕöčîííŕ ńęîđîńň, ęî˙ňî îňđŕç˙âŕ ńęîđîńňňŕ, ń ęî˙ňî ńĺ čçďčńâŕň "
-"őîđčçîíňŕëíčňĺ ëčíčč.\n"
-"\n"
-"ĚÍÎĂÎ Ĺ ÂŔĆÍÎ äŕ čçáĺđĺňĺ ňŕęŕâŕ ńčíőđîíčçŕöčîííŕňŕ ńęîđîńň, ęî˙ňî äŕ "
-"îňăîâŕđ˙ íŕ âúçěîćíîńňčňĺ íŕ Âŕřč˙ ěîíčňîđ - â ďđîňčâĺí ńëó÷ŕé ěîćĺňĺ äŕ "
-"ďîâđĺäčňĺ ěîíčňîđŕ ńč.\n"
-" Ŕęî čěŕňĺ í˙ęŕęâč ńúěíĺíč˙, čçáĺđĺňĺ ęîíńĺđâŕňčâíŕ íŕńňđîéęŕ."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Őîđčçîíňŕëíŕ ńęîđîńň íŕ âúçńňŕíîâ˙âŕíĺ"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Âĺđňčęŕëíŕ ńęîđîńň íŕ âúçńňŕíîâ˙âŕíĺ"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ěîíčňîđúň íĺ ĺ íŕńňđîĺí"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ăđŕôč÷íŕňŕ ęŕđňŕ âńĺ îůĺ íĺ ĺ íŕńňđîĺíŕ"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Îůĺ íĺ ĺ čçáđŕíŕ đŕçäĺëčňĺëíŕ ńďîńîáíîńň"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Čńęŕňĺ ëč äŕ ňĺńňâŕňĺ íŕńňđîéęčňĺ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Âíčěŕíčĺ: ňĺńňâŕíĺňî íŕ ňŕçč ăđŕôč÷íŕ ęŕđňŕ ěîćĺ äŕ \"çŕěđŕçč\" ęîěďţňúđŕ âč"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Ďđîâĺđęŕ íŕ íŕńňđîéęŕňŕ"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"îďčňŕéňĺ ńĺ äŕ ďđîěĺíčňĺ í˙ęîč ďŕđŕěĺňđč"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ďî˙âč ńĺ ăđĺřęŕ:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Čçőîä äî %d ńĺęóíäč"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Âĺđíč ëč ńŕ íŕńňđîéęčňĺ ?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ďî˙âč ńĺ ăđĺřęŕ, îďčňŕéňĺ ńĺ äŕ ďđîěĺíčňĺ í˙ęîč ďŕđŕěĺňđč"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Đŕçäĺëčňĺëíŕ ńďîńîáíîńň"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Čçáĺđĺňĺ đŕçäĺëčňĺëíŕ ńďîńîáíîńň č äúëáî÷číŕ íŕ öâĺňîâĺňĺ"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Ăđŕôč÷íŕ ęŕđňŕ: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 ńúđâúđ: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Îůĺ"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ĺęńďĺđňĺí đĺćčě"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Ďîęŕćč âńč÷ęč"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Đŕçäĺëčňĺëíŕ ńďîńîáíîńň"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Ňčď ęëŕâčŕňóđŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Ňčď ěčřęŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Óńňđîéńňâî íŕ ěčřęŕňŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ěîíčňîđ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Őîđčçîíňŕëíŕ ńčíőđîíčçŕöč˙ íŕ ěîíčňîđŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Âĺđňčęŕëíî îďđĺńí˙âŕíĺ íŕ ěîíčňîđŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Ăđŕôč÷íŕ ęŕđňŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Čäĺíňčôčęŕöč˙ íŕ ăđŕôč÷íŕňŕ ęŕđňŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Ăđŕôč÷íŕ ďŕěĺň: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Äúëáî÷číŕ íŕ öâĺňŕ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Đŕçäĺëčňĺëíŕ ńďîńîáíîńň: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 ńúđâúđ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 äđŕéâĺđ: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ďîäăîňîâęŕ çŕ íŕńňđîéâŕíĺ íŕ X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Ęŕęâî čńęŕňĺ äŕ íŕďđŕâčňĺ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Ďđîěĺíĺňĺ ěîíčňîđŕ"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ďđîěĺíĺňĺ ăđŕôč÷íŕňŕ ęŕđňŕ"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Ďđîěĺíĺňĺ îďöččňĺ íŕ ńúđâúđŕ"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Ďđîěĺíĺňĺ đŕçäĺëčňĺëíŕňŕ ńďîńîáíîńň"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Ďîęŕćč číôîđěŕöč˙ňŕ"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Ňĺńňâŕé îňíîâî"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Čçëčçŕíĺ"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Äŕ çŕďŕç˙ ëč ďđîěĺíčňĺ ?\n"
-"Ňĺęóůŕňŕ íŕńňđîéęŕ ĺ:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ďđč ńňŕđňčđŕíĺ íŕ ńčńňĺěŕňŕ"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Kîěďţňúđŕ âč ěîćĺ ŕâňîěŕňč÷íî, äŕ âëĺçĺ â X ďđč ńňŕđňčđŕíĺ.\n"
-"Čńęŕňĺ ëč X äŕ ńĺ ńňŕđňčđŕ, ęîăŕňî đĺńňŕđňčđŕňĺ ńčńňĺěŕňŕ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ěîë˙ âëĺçňĺ îňíîâî â %s, çŕ äŕ ŕęňčâčđŕňĺ ďđîěĺíčňĺ"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Ěîë˙ čçëĺçňĺ îň ńĺńč˙ňŕ č čçďîëçâŕéňĺ Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 öâ˙ňŕ (8 áčňŕ)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 őčë˙äč öâ˙ňŕ (15 áčňŕ)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 őčë˙äč öâ˙ňŕ (16 áčňŕ)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ěčëčîíŕ öâ˙ňŕ (24 áčňŕ)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 ěčëčŕđäŕ öâ˙ňŕ (32 áčňŕ)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ĘÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ĘÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 ĚÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 ĚÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 ĚÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 ĚÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 ĚÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 ĚÁ"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 ĚÁ čëč ďîâĺ÷ĺ"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 íŕ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 íŕ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-ńúâěĺńňčě, 1024x768 íŕ 87 Hz interlaced (í˙ěŕ 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 íŕ 87 Hz interlaced, 800x600 íŕ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 íŕ 60 Hz, 640x480 íŕ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 íŕ 60 Hz, 800x600 íŕ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Âčńîęî÷ĺńňîňĺí SVGA, 1024x768 íŕ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Ěíîăî÷ĺńňîňĺí ěîíčňîđ, ęîéňî äîńňčăŕ 1280x1024 íŕ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Ěíîăî÷ĺńňîňĺí ěîíčňîđ, ęîéňî äîńňčăŕ 1280x1024 íŕ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Ěíîăî÷ĺńňîňĺí ěîíčňîđ, ęîéňî äîńňčăŕ 1280x1024 íŕ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ěîíčňîđ, ęîéňî äîńňčăŕ 1600x1200 íŕ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ěîíčňîđ, ęîéňî äîńňčăŕ 1600x1200 íŕ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Ďúđâč ńĺęňîđ îň ńňŕđňčđŕůč˙ ńĺ ä˙ë"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Ďúđâč˙ň ńĺęňîđ îň äđŕéâŕ (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO číńňŕëŕöč˙"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Ęúäĺ čńęŕňĺ äŕ číńňŕëčđŕňĺ bootloader-ŕ?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub číńňŕëŕöč˙"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO ń ňĺęńňîâî ěĺíţ"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO ń ăđŕôč÷íî ěĺíţ"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Ńňŕđňčđŕíĺ îň DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Îďöčč íŕ çŕđĺćäŕůŕňŕ ďđîăđŕěŕ"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Čçďîëçâŕíŕ çŕđĺćäŕůŕňŕ ďđîăđŕěŕ"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader číńňŕëŕöč˙"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Ńňŕđňčđŕůî óńňđîéńňâî"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (íĺ đŕáîňč íŕ ńňŕđč BIOS-č)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Ęîěďŕęňĺí"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "ęîěďŕęňĺí"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Âčäĺî đĺćčě"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Çŕáŕâ˙íĺ ďđĺäč ńňŕđňčđŕíĺňî íŕ default ä˙ëŕ"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Ďŕđîëŕ"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Ďŕđîëŕ (îňíîâî)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Îăđŕíč÷č îďöččňĺ, çŕäŕâŕíč îň ęîěŕíäíč˙ đĺä"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "îăđŕíč÷č"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Ďî÷čńňâŕíĺ íŕ /tmp ďđč âń˙ęî çŕđĺćäŕíĺ"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ňî÷ĺí đŕçěĺđ íŕ RAM-ďŕěĺňňŕ, ŕęî ĺ íĺîáőîäčěî (íŕěĺđĺíč %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Âęëţ÷č ěíîăî ďđîôčëč"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Äŕéňĺ đŕçěĺđŕ RAM-ďŕěĺň â Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Îďöč˙ňŕ ``Îăđŕíč÷č îďöččňĺ îň ęîěŕíäíč˙ đĺä'' ĺ áĺçďîëĺçíŕ áĺç ďŕđîëŕ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Ěîë˙, îďčňŕéňĺ îňíîâî"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Ďŕđîëčňĺ íŕ ńúâďŕäŕň"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Ńňŕđňîâî ńúîáůĺíčĺ"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Čç÷ŕęâŕíĺ íŕ Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Čç÷ŕęâŕíĺ çŕ ńňŕđňčđŕíĺ íŕ ˙äđîňî"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Ńňŕđňčđŕíĺ îň CD ?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Ńňŕđňčđŕíĺ îň OF ?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "ÎŃ ďî ďîäđŕçáčđŕíĺ ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ňîâŕ ńŕ đŕçëč÷íčňĺ çŕďčńč.\n"
-"Ěîćĺňĺ äŕ äîáŕâčňĺ îůĺ čëč äŕ ďđîěĺíčňĺ ńúůĺńňâóâŕůčňĺ."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Äîáŕâč"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Ăîňîâî"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ěîäčôčöčđŕé"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ęŕęúâ ňčď číôîđěŕöč˙ čńęŕňĺ äŕ ďđčáŕâčňĺ"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Äđóăŕ ÎŃ (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Äđóăŕ ÎŃ (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Äđóăŕ ÎŃ (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Îáđŕç"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Ăëŕâĺí"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Äîďúëâŕíĺ"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "×ĺňĺíĺ-çŕďčń"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Ňŕáëčöŕ"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Îďŕńĺí"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Ĺňčęĺň"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Ďî ďîäđŕçáčđŕíĺ"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-ăîëĺěčíŕ"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Áĺç ăđŕôčęŕ"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ďđĺěŕőíč çŕďčń"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Ďđŕçĺí ĺňčęĺň íĺ ĺ đŕçđĺřĺí"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Ňđ˙áâŕ äŕ čěŕňĺ swap-ä˙ë"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ňîçč ĺňčęĺň âĺ÷ĺ ńĺ čçďîëçâŕ"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Íŕěĺđĺíč ńŕ %s %s číňĺđôĺéńč"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Čěŕňĺ ëč äđóă(č) ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Čěŕňĺ ëč í˙ęŕęúâ %s číňĺđôĺéń?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Íĺ"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Äŕ"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Âčć őŕđäóĺđíŕňŕ číôîđěŕöč˙"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Číńňŕëčđŕíĺ íŕ äđŕéâĺđ çŕ %s ďëŕňęŕ %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(ěîäóë %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Ęîé %s äđŕéâĺđ äŕ ďđîáâŕě ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-" í˙ęîč ńëó÷ŕč, %s äđŕéâĺđúň ńĺ íóćäŕĺ îň äîďúëíčňĺëíŕ číôîđěŕöč˙, çŕ\n"
-"äŕ đŕáîňč ęîđĺęňíî, âúďđĺęč ÷ĺ íîđěŕëíî đŕáîňč č áĺç íĺ˙. Ćĺëŕĺňĺ ëč "
-"äŕďîäŕäĺňĺ\n"
-"äîďúëíčňĺëíč îďöčč çŕ íĺăî čëč äŕ đŕçđĺřčňĺ íŕ äđŕéâĺđŕ äŕ ďîňúđńč "
-"číôîđěŕöč˙ňŕ\n"
-"îň ęî˙ňî ńĺ íóćäŕĺ ? Ďî ďđčíöčď ňîâŕ ěîćĺ äŕ çŕáčĺ ęîěďţňúđŕ âč, íî í˙ěŕ äŕ "
-"ăî ďîâđĺäč."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Ŕâňîěŕňč÷íî çŕńč÷ŕíĺ"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Çŕäŕé îďöčč"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ńĺăŕ ěîćĺňĺ äŕ ďîäŕäĺňĺ îďöččňĺ ěó äî ěîäóëŕ %s.\n"
-"Îďöččňĺ ńŕ âúâ ôîđěŕň ``čěĺ=ńňîéíîńň čěĺ2=ńňîéíîńň2 ...''.\n"
-"Íŕďđčěĺđ: ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Îďöčč íŕ ěîäóëŕ:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Çŕđĺćäŕíĺňî íŕ ěîäóëŕ %s íĺ óńď˙.\n"
-"Čńęŕňĺ ëč äŕ îďčňŕňĺ îňíîâî ń äđóăč ďŕđŕěĺňđč ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(âĺ÷ĺ ďđčáŕâčő %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ňŕçč ďŕđîëŕ ĺ ďđĺęŕëĺíî ďđîńňŕ"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Ěîë˙, çŕäŕéňĺ ďîňđĺáčňĺëńęî čěĺ"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Ďîňđĺáčňĺëńęîňî čěĺ ěîćĺ äŕ âęëţ÷âŕ ńŕěî ěŕëęč áóęâč, íîěĺđŕ, `-' č `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ňîâŕ ďîňđĺáčňĺëńęî čěĺ ĺ âĺ÷ĺ äîáŕâĺíî"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Äîáŕâč ďîňđĺáčňĺë"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Âúâĺäĺňĺ ďîňđĺáčňĺë\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Ďđčĺěč ďîňđĺáčňĺë"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Čńňčíńęî čěĺ"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Ďîňđĺáčňĺëńęî čěĺ"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Řĺë"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Čęîíŕ"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ěîăŕ äŕ íŕńňđî˙ ęîěďţňúđŕ âč äŕ âëčçŕíĺ â ńčńňĺěŕňŕ ŕâňîěŕňč÷íî ęŕňî í˙ęîé "
-"ďîňđĺáčňĺë.\n"
-"Čńęŕňĺ ëč ňŕçč âúçěîćíîńň ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Čçáĺđĺňĺ ďîäđŕçáčđŕů ńĺ ďîňđĺáčňĺë :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Čçáĺđĺňĺ Windows Manager çŕ ńňŕđňčđŕíĺ:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Ěîë˙, čçáĺđĺňĺ čçďîëçâŕí ĺçčę."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Ěîćĺňĺ äŕ čçáĺđĺňĺ äđóăč ĺçčöč, ęîčňî ůĺ áúäŕň íŕëčöĺ ńëĺäčíńňŕëŕöč˙ňŕ"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Âńč÷ęč"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Äîáŕâ˙íĺ íŕ ďîňđĺáčňĺë"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Ęëčĺíňńęŕ"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Ďîäĺë˙íĺ íŕ ôŕéëîâĺ"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Ňîçč ďŕęĺň ňđ˙áâŕ äŕ áúäĺ îáíîâĺí\n"
-"Ńčăóđíč ëč ńňĺ, ÷ĺ čńęŕňĺ äŕ ăî čçęëţ÷čňĺ ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Îňě˙íŕ"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Äîáđĺ äîřëč ďđč Cracker-čňĺ"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Ëîřî"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ńňŕíäŕđňíŕ"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Âčńîęî"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Âčńîęî"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Ďŕđŕíîč÷íî"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ňîâŕ íčâî ńĺ čçďîëçâŕ ń âíčěŕíčĺ. Ňîâŕ ęŕđŕ ńčńňĺěŕňŕ âč ďî-ëĺńíŕ çŕ\n"
-"óďîňđĺáŕ, íî ĺ ďî-÷óâńňâčňĺëíî: íĺ ňđ˙áâŕ äŕ áúäĺ čçďîëçâŕíŕ íŕ ěŕřčíč\n"
-"ńâúđçŕíč ń äđóăč čëč ďî Číňĺđíĺň. Í˙ěŕ äîńňúď ń ďŕđîëč."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ďŕđîëŕňŕ ńĺăŕ ĺ âęëţ÷ĺíŕ, íî čçďîëçâŕíĺňî ęŕňî ěđĺćîâ ęîěďţňúđ íĺ ĺ "
-"ďđĺďîđú÷čňĺëíî."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ňîâŕ ĺ ńňŕíäŕđňíŕňŕ ńčăóđíîńň ďđĺďîđú÷čňĺëíŕ çŕ ęîěďţňúđ, ęîéňî ůĺ áúäĺ\n"
-"čçďîëçâŕí äŕ ńĺ ńâúđçâŕ ęúě Číňĺđíĺň ęŕňî ęëčĺíň. Čěŕ ďđîâĺđęč íŕ "
-"ńčăóđíîńňňŕ. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ń ňîâŕ íčâî íŕ ńčăóđíîńň, ďîëçâŕíĺňî íŕ ńčńňĺěŕňŕ ęŕňî ńúđâúđ ńňŕâŕ "
-"âúçěîćíî.\n"
-"Ńčăóđíîńňňŕ ńĺăŕ ĺ äîńňŕňú÷íî ăîë˙ěŕ äŕ ńĺ čçďîëçâŕ ńčńňĺěŕňŕ ęŕňî\n"
-"ńúđâúđ ďđčĺěŕů âđúçęč îň ěíîăî ęëčĺíňč. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Čçáčđŕěĺ 4-ňî íčâî, íî ńčńňĺěŕňŕ ĺ íŕďúëíî çŕňâîđĺíŕ.\n"
-"Íčâîňî íŕ ńčăóđíîńň ĺ íŕ ěŕęńčěóěŕ ńč."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Čçáĺđĺňĺ íčâî íŕ ńčăóđíîńň"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Íčâî íŕ ńčăóđíîńň"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Čçďîëçâŕéňĺ libsafe çŕ ńúđâúđč"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Áčáëčîňĺęŕ, ęî˙ňî îńčăóđ˙âŕ çŕůčňŕ îň aňŕęč ń ďđĺďúëâŕíĺ íŕ áóôĺđ č ôîđěŕňíč "
-"ńňđčíăîâĺ."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "í˙ěŕ äîńňŕňú÷íî ě˙ńňî çŕ /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Äĺńęňîď"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Ńňŕđňîâî Ěĺíţ"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Íĺ ěîćĺňĺ äŕ číńňŕëčđŕňĺ bootloader íŕ ä˙ëŕ %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "í˙ěŕ âúâĺäĺíŕ ďîěîů îůĺ.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Íŕńňđîéęŕ íŕ íŕ÷číŕ íŕ ńňŕđňčđŕíĺ"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ôŕéëîâĺ"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ôŕéë/_Čçőîä"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<ęîíňđîë>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle ęŕňĺăîđčçčđŕí ěîíčňîđ"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle ěîíčňîđ"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Îáčęíîâĺí ěîíčňîđ"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Îáčęíîâĺí Gtk+ ěîíčňîđ"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ďóńíč Aurora ďđč ńňŕđňčđŕíĺ"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Đĺćčě íŕ Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Đĺćčě íŕ Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Â ěîěĺíňŕ čçďîëçâŕňĺ %s ęŕňî ďđîăđŕěŕ çŕ ńňŕđňčđŕíĺ.\n"
-"Öúęíĺňĺ íŕ Íŕńňđîé, çŕ äŕ ńňŕđňčđŕňĺ óńňŕíîâ˙âŕůč˙ ěŕăüîńíčę."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Íŕńňđîé"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Ńčńňĺěĺí đĺćčě"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Ďóńíč X-Window ńčńňĺěŕňŕ ďđč ńňŕđňčđŕíĺ"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Íĺ, íĺ čńęŕě autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Äŕ, čńęŕě autologin ń ňîâŕ (ďîňđĺáčňĺë, äĺńęňîď)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "íĺ ěîăŕ äŕ îňâîđ˙ /etc/inittab çŕ ÷ĺňĺíĺ: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "ĂÁ"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "ĘÁ"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "ĚÁ"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "ŇÁ"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ěčíóňč"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ěčíóňŕ"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d ńĺęóíäč"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Íĺ ěîăŕ äŕ äîáŕâ˙ ďîâĺ÷ĺ ä˙ëîâĺ"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ěîćĺňĺ äŕ čçáĺđĺňĺ äđóăč ĺçčöč, ęîčňî ůĺ áúäŕň íŕëčöĺ ńëĺäčíńňŕëŕöč˙ňŕ"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ôđŕíöč˙"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Áĺëăčéńęŕ"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Íĺěńęŕ"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Ăđúöęŕ"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Íîđâĺćęŕ"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Âčć"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Čňŕëčŕíńęŕ"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "ńĺđčéíŕ"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Ďúđâî ńúçäŕéňĺ backup íŕ ńâîčňĺ äŕííč"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Ďđî÷ĺňĺňĺ âíčěŕňĺëíî !"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ŕęî ńě˙ňŕňĺ äŕ čçďîëçâŕňĺ aboot, îńňŕâĺňĺ ńâîáîäíî ďđîńňđŕíńňâî (2048 "
-"ńĺęňîđŕ\n"
-"ńŕ äîńňŕňú÷íč) â íŕ÷ŕëîňî íŕ äčńęŕ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Ăđĺřęŕ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Ěŕăüîńíčę"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Čçáĺđĺňĺ äĺéńňâčĺ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Čěŕňĺ ĺäčí ăîë˙ě FAT ä˙ë\n"
-"(ďî ďđčíöčď ńĺ ďîëçâŕň îň Microsoft Dos/Windows).\n"
-"Ďđĺäëŕăŕě ďúđâî äŕ ďđîěĺíčňĺ ăîëĺěčíŕňŕ íŕ ňîçč ä˙ë\n"
-"(ůđŕęíĺňĺ âúđőó íĺăî, ŕ ńëĺä ňîâŕ ůđŕęíĺňĺ âúđőó \"Ďđîěĺíč ăîëĺěčíŕňŕ\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Ěîë˙, öúęíĺňĺ íŕ ä˙ëŕ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Ďîäđîáíîńňč"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Ćóđíŕëíŕ FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Ďđŕçĺí"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Äđóăŕ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Âčäîâĺ ôŕéëîâŕ ńčńňĺěŕ:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Ńúçäŕé"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Âčä"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Âěĺńňî ňîâŕ čçďîëçâŕéňĺ ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Čçňđčé"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Ďúđâî čçďîëçâŕéňĺ 'Äĺěîíňčđŕíĺ'"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Ńëĺä ďđîě˙íŕ íŕ ňčďŕ íŕ ä˙ëŕ %s, âńč÷ęč äŕííč âúđőó íĺăî ůĺ áúäŕň çŕăóáĺíč"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Čçáĺđĺňĺ ä˙ë"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Čçáĺđĺňĺ äđóă ä˙ë"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Čçëĺç"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Ďđĺěčíč â Ĺęńďĺđňĺí đĺćčě"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ďđĺěčíč â Íîđěŕëĺí đĺćčě"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Âúđíč"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Ďđîäúëćĺíčĺ âúďđĺęč âńč÷ęî ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Čçőîä áĺç çŕďčń"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Čçőîä, áĺç äŕ çŕďčń íŕ ňŕáëčöŕňŕ íŕ ä˙ëîâĺňĺ ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Čńęŕňĺ ëč äŕ çŕďŕçčňĺ ďđîěĺíčňĺ â /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Ŕâňîěŕňč÷íî ńúçäŕâŕíĺ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Čç÷čńňč âńč÷ęî"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Číôîđěŕöč˙ňŕ çŕ ňâúđäč˙ äčńę"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Âńč÷ęč ďúđâč÷íč ä˙ëîâĺ ńĺ čçďîëçâŕň"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Íĺ ěîăŕ äŕ äîáŕâ˙ ďîâĺ÷ĺ ä˙ëîâĺ"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ŕęî čńęŕňĺ îůĺ ä˙ëîâĺ, ěîë˙ čçňđčéňĺ ĺäčí, çŕ äŕ ěîćĺňĺ äŕ ńúçäŕäĺňĺ ĺäčí "
-"đŕçřčđĺí ä˙ë"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Çŕďŕçč ňŕáëčöŕňŕ ń ä˙ëîâĺňĺ"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Âúçńňŕíîâč ňŕáëčöŕňŕ ń ä˙ëîâĺňĺ"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Ńďŕń˙âŕíĺ ňŕáëčöŕňŕ ń ä˙ëîâĺňĺ"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ďđĺçŕđĺäč ňŕáëčöŕňŕ ń ä˙ëîâĺňĺ"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Ŕâňîěŕňč÷íî ěîíňčđŕíĺ íŕ ńěĺí˙ĺě íîńčňĺë"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Čçáĺđĺňĺ ôŕéë"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Đĺçĺđâíŕňŕ ňŕáëčöŕ íŕ ä˙ëîâĺňĺ íĺ ĺ ńúń ńúůŕňŕ ăîëĺěčíŕ\n"
-"Äŕ ďđîäúëćŕ ëč âńĺ ďŕę ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Ďđĺäóďđĺćäĺíčĺ"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ńëîćĺňĺ äčńęĺňŕ âúâ ôëîďčňî\n"
-"Âńč÷ęč äŕííč, íŕěčđŕůč ńĺ âúđőó äčńęĺňŕňŕ, ůĺ áúäŕň çŕăóáĺíč"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Îďčňâŕě ńĺ äŕ ńďŕń˙ ňŕáëčöŕňŕ íŕ ä˙ëîâĺňĺ"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Ďîäđîáíŕ číôîđěŕöč˙"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ě˙ńňî íŕ ěîíňčđŕíĺ"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Îďöčč"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Ďđîěĺíč ăîëĺěčíŕňŕ"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Ďđĺěĺńňč"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Ôîđěŕňčđŕé"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Ěîíňčđŕé"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Ďđčáŕâč ęúě RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Ďđčáŕâč ęúě LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Äĺěîíňčđŕé"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ďđĺěŕőíč îň RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ďđĺěŕőíč îň LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ěîäčôčöčđŕé RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Čçďîëçâŕé çŕ loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Ńúçäŕé íîâ ä˙ë"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Íŕ÷ŕëĺí ńĺęňîđ: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Ăîëĺěčíŕ â MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Âčä ôŕéëîâŕ ńčńňĺěŕ: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ě˙ńňî íŕ ěîíňčđŕíĺ: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Ďđĺäďî÷čňŕíčĺ: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Äŕ ďđĺěŕőíŕ ëč loopback ôŕéëŕ ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Ďđîě˙íŕ ňčďŕ íŕ ä˙ëŕ"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Ęî˙ ôŕéëîâŕ ńčńňĺěŕ čńęŕňĺ ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Ďđĺőîä îň ext2 ęúě ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Ęúäĺ čńęŕňĺ äŕ ěîíňčđŕňĺ loopback-ôŕéëŕ %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Ęúäĺ čńęŕňĺ äŕ ěîíňčđŕňĺ óńňđîéńňâî %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Íĺ ěîăŕ äŕ ěŕőíŕ ňî÷ęŕňŕ íŕ ěîíňčđŕíĺ, ňúé ęŕňî ä˙ëúň ńĺ čçďîëçâŕ çŕ "
-"loopback.\n"
-"Ďúđâî ěŕőíĺňĺ loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Čç÷čńë˙âŕě ăđŕíčöčňĺ íŕ fat ôŕéëîâŕňŕ ńčńňĺěŕ"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ďđîě˙íŕ íŕ ăîëĺěčíŕňŕ"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ăîëĺěčíŕňŕ íŕ ä˙ëŕ íĺ ěîćĺ äŕ áúäĺ ďđîěĺíĺíŕ"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Âńč÷ęč äŕííč íŕ ňîçč ä˙ë ňđ˙áâŕ äŕ áúäŕň ŕđőčâčđŕíč"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ńëĺä ďđîě˙íŕ ăîëĺěčíŕňŕ íŕ ä˙ëŕ %s, äŕííčte âúđőó íĺăî ůĺ áúäŕň çŕăóáĺíč"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Čçáĺđĺňĺ íîâŕ ăîëĺěčíŕ"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Íîâŕ ăîëĺěčíŕ â MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Íŕ ęîé äčńę čńęŕňĺ äŕ ăî ďđĺěĺńňčňĺ ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Ńĺęňîđ"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Íŕ ęîé ńĺęňîđ čńęŕňĺ äŕ ăî ďđĺěĺńňčňĺ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Ěĺńňĺíĺ"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Ěĺńňâ˙ ä˙ëŕ ... "
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Čçáĺđĺňĺ ńúůĺńňâóâŕů RAID çŕ ďđčáŕâ˙íĺ"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "íîâ"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Čçáĺđĺňĺ ńúůĺńňâóâŕů LVM çŕ ďđčáŕâ˙íĺ"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM čěĺ ?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ňîçč ä˙ë íĺ ěîćĺ äŕ áúäĺ čçďîëçâŕí çŕ loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Čěĺ íŕ loopback ôŕéëŕ: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Äŕéňĺ čěĺ íŕ ôŕéë"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Ôŕéëúň âĺ÷ĺ ńĺ čçďîëçâŕ ňî äđóă loopback, čçáĺđĺňĺ äđóă ôŕéë."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Ôŕéëúň âĺ÷ĺ ńúřĺńňâóâŕ. Äŕ ăî čçďîëçâŕě ëč ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Îďöčč çŕ mount:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Đŕçëč÷íč"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "óńňđîéńňâî"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "íčâî"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ăîëĺěčíŕ íŕ ďŕđ÷ĺňî"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Âíčěŕíčĺ: ňŕçč îďĺđŕöč˙ ĺ îďŕńíŕ"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Ęŕęúâ ňčď đŕçäĺë˙íĺ íŕ ä˙ëîâĺ ?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ńúćŕë˙âŕě, íî íĺ ěîăŕ äŕ ďđčĺěŕ äŕ ńúçäŕě /boot ňîëęîâŕ íŕâúňđĺ âúđőó äčńęŕ "
-"(âúđőó öčëčíäúđ > 1024).\n"
-"Čëč čçďîëçâŕňĺ LILO č ňî íĺ đŕáîňč, čëč íĺ čçďîëçâŕňĺ LILO č í˙ěŕňĺ íóćäŕ "
-"îň /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Ä˙ëúň, ęîéňî ńňĺ ěŕđęčđŕëč çŕ root (/) ĺ ôčçč÷ĺńęč đŕçďîëîćĺí îňâúä\n"
-"1024-č˙ öčëčíäúđ íŕ ňâúđäč˙ äčńę č í˙ěŕňĺ /boot ä˙ë.\n"
-"Ŕęî ńě˙ňŕňĺ äŕ čçďîëçâŕňĺ boot ěĺíčäćúđŕ LILO, áúäĺňĺ âíčěŕňĺëíč ďđč\n"
-"ďđčáŕâ˙íĺňî íŕ /boot ä˙ë"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Ěŕđęčđŕëč ńňĺ ńîôňóĺđĺí RAID ä˙ë ęŕňî root (/).\n"
-"Í˙ěŕ çŕđĺćäŕůŕ ďđîăđŕěŕ, ęî˙ňî äŕ ěîćĺ äŕ ńĺ ńďđŕâč ń íĺăî áĺç /boot ä˙ë.\n"
-"Ňŕęŕ ÷ĺ äîáŕâĺňĺ /boot ä˙ë"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ňŕáëčöŕňŕ íŕ ä˙ëîâĺňĺ íŕ óńňđîéńňâî %s ůĺ áúäĺ çŕďčńŕíŕ âúđőó äčńęŕ !"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Ňđ˙áâŕ äŕ đĺńňŕđňčđŕňĺ, ďđĺäč ďđîěĺíčňĺ äŕ âë˙çŕň â ńčëŕ"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ńëĺä ôîđěŕňčđŕíĺ íŕ ä˙ëŕ %s, âńč÷ęč äŕííč âúđőó íĺăî ůĺ áúäŕň çŕăóáĺíč"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Ôîđěŕňčđŕíĺ"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ôîđěŕňčđŕíĺ íŕ loopback ôŕéëŕ %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ôîđěŕňčđŕíĺ íŕ ä˙ëŕ %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Ńęđčé ôŕéëîâĺňĺ"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Ďđĺěĺńňč ôŕéëîâĺňĺ íŕ íîâ ä˙ë"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Äčđĺęňîđč˙ňŕ %s âĺ÷ĺ ńúäúđćŕ í˙ęŕęâč äŕííč\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Ďđĺěĺńňč ôŕéëîâĺňĺ íŕ íîâ ä˙ë"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Ęîďčđŕíĺ íŕ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Čçňđčâŕíĺ íŕ %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Óńňđîéńňâî: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Áóęâŕ íŕ óńňđîéńňâîňî ďîä DOS: %s (ďđîńňî ďđĺäďîëîćĺíčĺ)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Âčä: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Čěĺ: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Íŕ÷ŕëî: ńĺęňîđ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Đŕçěĺđ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ńĺęňîđŕ"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Îň öčëčíäúđ %d äî öčëčíäúđ %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Ôîđěŕňčđŕí\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Íĺôîđěŕňčđŕí\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Ěîíňčđŕí\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback ôŕéë(îâĺ):\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ä˙ë, ęîéňî ńĺ ńňŕđňčđŕ ďî ďîäđŕçáčđŕíĺ\n"
-" (çŕ MS-DOS boot, íĺ çŕ lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Íčâî %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Đŕçěĺđ íŕ ďŕđ÷ĺňî %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-äčńęîâĺ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Čěĺ íŕ loopback ôŕéëŕ: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Âĺđî˙ňíî ĺ ňîçč ä˙ë äŕ ĺ\n"
-"Äđŕéâĺđ-ä˙ë, ěîćĺ áč ňđ˙áâŕ\n"
-"ňđ˙áâŕ äŕ ăî îńňŕâčňĺ.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ňŕçč ńďĺöčŕëíŕ ńňŕđňčđŕůŕ\n"
-"čâčöŕ íŕ ä˙ëŕ ĺ çŕ äâîéíî\n"
-"ńňŕđňčđŕíĺ íŕ ńčńňĺěŕňŕ âč.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Đŕçěĺđ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ăĺîěĺňđč˙: %s öčëčíäđč, %s ăëŕâč, %s ńĺęňîđč\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Číôîđěŕöč˙: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-äčńęîâĺ %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Ňčď íŕ ňŕáëčöŕňŕ ń ä˙ëîâĺ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "íŕ řčíŕ %d ŕäđĺń %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Îďöčč: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Âčä ôŕéëîâŕ ńčńňĺěŕ: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Ďŕđîëŕňŕ ĺ ďđĺęŕëĺíî ďđîńňŕ (ňđ˙áâŕ äŕ áúäĺ äúëăŕ ďîíĺ %d ńčěâîëŕ)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Ďŕđîëčňĺ íŕ ńúâďŕäŕň"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Ďđîě˙íč ňčďŕ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Ěîë˙, öúęíĺňĺ íŕ íîńčňĺë˙"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNS ńúđâúđ"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ôîđěŕňčđŕíĺ îň %s ďđîâŕëĺíî"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "íĺ çíŕě ęŕę äŕ ôîđěŕňčđŕě %s â ňčď %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck čçëĺçĺ ń čçőîäĺí ęîä %d čëč ńčăíŕë %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ăđĺřęŕ ďđč äĺěîíňčđŕíĺňî íŕ %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "ďđîńň"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ńúđâúđ"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Íĺ ěîćĺňĺ äŕ čçďîëçâŕňĺ JFS çŕ ä˙ë ďî-ěŕëúę îň 16 ĚÁ"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Íĺ ěîćĺňĺ äŕ číńňŕëčđŕíĺ ReiserFS íŕ ä˙ë ďî-ěŕëúę îň 32 ĚÁ"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Ňî÷ęčňĺ íŕ ěîíňčđŕíĺ ňđ˙áâŕ äŕ çŕďî÷âŕň ń /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Âĺ÷ĺ čěŕ ä˙ë ń ňŕçč ě˙ńňî íŕ ěîíňčđŕíĺ %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Íĺ ěîćĺňĺ äŕ čçďîëçâŕňĺ LVM ëîăč÷ĺńęč ňčď çŕ ě˙ńňî íŕ ěîíňčđŕíĺ %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ňŕçč äčđĺęňîđč˙ ňđ˙áâŕ äŕ îńňŕíĺ â đŕěęčňĺ íŕ root ôŕéëîâŕňŕ ńčńňĺěŕ."
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Íóćäŕĺňĺ ńĺ îň čńňčíńęŕ ôŕéëîâŕ ńčńňĺěŕ (ext2, reiserfs) çŕ ňŕçč ňî÷ęŕ íŕ "
-"ěîíňčđŕíĺ\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Íĺ ěîćĺňĺ äŕ čçďîëçâŕňĺ LVM ëîăč÷ĺńęč ňčď çŕ ě˙ńňî íŕ ěîíňčđŕíĺ %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Í˙ěŕ äîńňŕňú÷íî ě˙ńňî çŕ ŕâňîěŕňč÷íî çŕĺěŕíĺ"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Ăđĺřęŕ ďđč îňâŕđ˙íĺ íŕ %s çŕ çŕďčń: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ďî˙âč ńĺ ăđĺřęŕ - íĺ ńŕ îňęđčňč âŕëčäíč óńňđîéńňâŕ, âúđőó ęîčňî äŕ áúäŕň "
-"ńúçäŕäĺíč íîâč ôŕéëîâč ńčńňĺěč. Ěîë˙ ďđîâĺđĺňĺ ňâúđäč˙ ńč äčńę ńč çŕ "
-"ďđč÷číŕňŕ çŕ ňîçč ďđîáëĺě"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Í˙ěŕňĺ íčęŕęâč ä˙ëîâĺ!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux ĺ ěíîăîďîňđĺáčňĺëńęŕ ńčńňĺěŕ, ęî˙ňî îçíŕ÷ŕâŕ, ÷ĺ âńĺęč ďîňđĺáčňĺë "
-"ěîćĺ\n"
-"äŕ čěŕ ńâîč ďđĺäďî÷ĺňŕíč˙, ôŕéëîâĺ č ň.í.. ěîćĺňĺ äŕ ďđî÷ĺňĺňĺ Đúęîâîńňâîňî "
-"íŕ\n"
-"Ďîňđĺáčňĺë˙, çŕ äŕ íŕó÷čňĺ ďîâĺ÷ĺ.\n"
-"Çŕ đŕçëčęŕ îň Root, ęîéňî ĺ ŕäěčíčńňđŕňîđúň, ďîňđĺáčňĺëčňĺ, ęîčňî ůĺ "
-"äîáŕâčňĺ ňóę\n"
-"í˙ěŕ äŕ ěîăŕň äŕ ďđîěĺí˙ň íčůî îńâĺí ńîáńňâĺíčňĺ ńč ôŕéëîâĺ č ňĺőíčňĺ "
-"íŕńňđîéęč.\n"
-"Ůĺ ňđ˙áâŕ äŕ ńúçäŕäĺňĺ ďîíĺ ĺäčí îáčęíîâĺí ďîňđĺáčňĺë çŕ ńĺáĺ ńč.\n"
-"Ń ňîçč ŕęŕóíň ůĺ ňđ˙áâŕ äŕ âëčçŕňĺ çŕ đóňčííŕ äĺéíîńň. Âúďđĺęč ňîâŕ "
-"ďđŕęňčęŕňŕ\n"
-"äŕ âëčçŕňĺ ęŕňî root ĺćĺäíĺâíî, ěîćĺ äŕ áúäĺ ěíîăî îďŕńíŕ ! Č íŕé-"
-"ěŕëęŕňŕăđĺřęŕ\n"
-"ěîćĺ äŕ îçíŕ÷ŕâŕ, ÷ĺ ńčńňĺěŕňŕ âč í˙ěŕ äŕ đŕáîňč ďîâĺ÷ĺ. Ŕęî íŕďđŕâčňĺ í˙ęî˙ "
-"ńĺđčîçíŕ\n"
-"ăđĺřęŕ ęŕňî ďîňđĺáčňĺë, ňîâŕ ěîćĺ ńŕ äŕ äîâĺäĺ äî çŕăóáŕ íŕ ÷ŕńň îň "
-"číôîđěŕöč˙ňŕ,\n"
-"íî íĺ č íŕ ö˙ëŕňŕ ńčńňĺěŕ.\n"
-"\n"
-"Ďúđâî, ňđ˙áâŕ äŕ ńč âúâĺäĺňĺ čěĺňî. Ňîâŕ íĺ ĺ çŕäúëćčňĺëíî, đŕçáčđŕ ńĺ, "
-"âńúůíîńň\n"
-"ěîćĺňĺ äŕ âúâĺäĺňĺ ęŕęâîňî č äŕ ĺ. DrakX ńëĺä ňîâŕ ůĺ čçáĺđĺ ďúđâŕňŕ "
-"âúâĺäĺíŕ\n"
-"â ęóňčéęŕňŕ äóěŕ č ůĺ ăî čçęŕđŕ ęŕňî ďîňđĺáčňĺëńęî čěĺ. Ňîâŕ ĺ čěĺňî, ń "
-"ęîĺňî\n"
-"âńúůíîńň îďđĺäĺëĺíč˙ň ďîňđĺáčňĺë ůĺ âëčçŕ â ńčńňĺěŕňŕ. Ěîćĺňĺ äŕ ăî "
-"ďđîěĺíčňĺ.\n"
-"Ňđ˙áâŕ äŕ âúâĺäĺňĺ č ďŕđîëŕ ňóę. Ďŕđîëŕňŕ íŕ íĺďđĺâčëĺăčđîâŕí (îáčęíîâĺí) "
-"ďîňđĺáčňĺë\n"
-"íĺ ĺ ňîëęîâŕ ôŕňŕëíŕ ęŕňî ňŕçč íŕ Root îň ăëĺäíŕ ňî÷ęŕ íŕ ńčăóđíîńňňŕ, íî "
-"âńĺ\n"
-"ďŕę í˙ěŕ ďđč÷číŕ äŕ ˙ ďîäöĺí˙âŕňŕ, ňúé ęŕňî đčńęóâŕňĺ ôŕéëîâĺňĺ ńč.\n"
-"\n"
-"Ńëĺä ęŕňî öúęíĺňĺ íŕ \"Ďđčĺěč ďîňđĺáčňĺë\", ěîćĺňĺ äŕ äîáŕâčňĺ ęîëęîňî ńč "
-"čńęŕňĺ.\n"
-"Äîáŕâĺňĺ ďî ĺäčí ďîňđĺáčňĺë çŕ âńĺęč îň ďđč˙ňĺëčňĺ ńč: áŕůŕ ńč, ńĺńňđŕ ńč, "
-"íŕďđčěĺđ.\n"
-"Ęîăŕňî ńňĺ äîáŕâčëč âńč÷ęč ďîňđĺáčňĺëč, ęîčňî čńęŕňĺ, öúęíĺňĺ Ăîňîâî.\n"
-"\n"
-"Öúęíĺňĺ íŕ áóňîíŕ \"Íŕďđĺäíč÷ŕâ\", çŕ äŕ ďđîěĺíčňĺ îáâčâęŕňŕ ďî ďîäđŕçáčđŕíĺ "
-"íŕ\n"
-"ďîňđĺáčňĺë˙ (bash ďî ďîäđŕçáčđŕíĺ)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ďî-ăîđĺ ńŕ čçáđîĺíč çŕńĺ÷ĺíčňĺ Linux ä˙ëîâĺ ńúůĺńňâóâŕůč\n"
-"íŕ ňâúđäč˙ âč äčńę. Ěîćĺňĺ äŕ çŕďŕçčňĺ čçáîđŕ íŕďđŕâĺí îň ěŕăüîńíčęŕ, ňĺ ńŕ\n"
-"äîáđč çŕ îáůŕ óďîňđĺáŕ. Ŕęî ăč ďđîěĺíčňĺ, ňđ˙áâŕ äŕ ďîíĺ äŕ îďđĺäĺëčňĺ\n"
-"root ä˙ë (\"/\"). Íĺ čçáčđŕéňĺ ďđĺęŕëĺíî ěŕëęč ä˙ëîâĺ, çŕůîňî í˙ěŕ äŕ "
-"ěîćĺňĺ\n"
-"äŕ číńňŕëčđŕňĺ äîńňŕňú÷íî ńîôňóĺđ. Ŕęî čńęŕňĺ äŕ ńúőđŕí˙âŕňĺ äŕííčňĺ ńč íŕ\n"
-"îňäĺëĺí ä˙ë, ňđ˙áâŕ äŕ čçáĺđĺňĺ \"/home\" (âúçěîćíî ĺ ńŕěî, ŕęî čěŕňĺ "
-"ďîâĺ÷ĺ\n"
-"îň ĺäčí Linux ä˙ë).\n"
-"\n"
-"\n"
-"Çŕ číôîđěŕöč˙, âńĺęč ä˙ë ĺ ďîęŕçŕí, ęŕęňî ńëĺäâŕ: \"Čěĺ\", \"Ęŕďŕöčňĺň\".\n"
-"\n"
-"\n"
-"\"Čěĺňî\" ńĺ ęîäčđŕ ęŕęňî ńëĺäâŕ: \"ňčď íŕ äčńęŕ\", \"íîěĺđ íŕ äčńęŕ\",\n"
-"\"íîěĺđ íŕ ä˙ë\" (íŕďđčěĺđ, \"hda1\").\n"
-"\n"
-"\n"
-"\"Ňčďúň íŕ äčńęŕ\" ěîćĺ äŕ ĺ \"hd\", ŕęî ĺ IDE ňâúđä äčńę, čëč \"sd\", ŕęî "
-"ĺ\n"
-"SCSI ňâúđä äčńę.\n"
-"\n"
-"\n"
-"\"Íîěĺđúň íŕ äčńęŕ\" âčíŕăč ĺ áóęâŕňŕ ńëĺä \"hd\" čëč \"sd\". Ďđč IDE "
-"äčńęîâĺ:\n"
-"\n"
-" * \"a\" îçíŕ÷ŕâŕ \"master äčńę íŕ ďúđâč˙ IDE ęîíňđîëĺđ\",\n"
-" * \"b\" îçíŕ÷ŕâŕ \"slave äčńę íŕ ďúđâč˙ IDE ęîíňđîëĺđ\",\n"
-" * \"c\" îçíŕ÷ŕâŕ \"master äčńę íŕ âňîđč˙ IDE ęîíňđîëĺđ\",\n"
-" * \"d\" îçíŕ÷ŕâŕ \"slave äčńę íŕ âňîđč˙ IDE ęîíňđîëĺđ\".\n"
-"\n"
-"\n"
-"Ďđč SCSI óńňđîéńňâŕ, \"a\" îçíŕ÷ŕâŕ \"ďúđâč ňâúđä äčńę\", \"b\" îçíŕ÷ŕâŕ "
-"\"âňîđč ňâúđä äčńę\" č ň.í.."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Číńňŕëŕöč˙ňŕ íŕ Mandrake Linux ĺ đŕçďîëîćĺíŕ íŕ í˙ęîëęî CDROM-ŕ. DrakX\n"
-"çíŕĺ äŕëč čçáđŕí ďŕęĺň íĺ ńĺ íŕěčđŕ íŕ äđóă CDROM čëč ůĺ čçâŕäč ňĺęóůîňî\n"
-"CD č ůĺ âč îńňŕâč äŕ âęŕđŕňĺ ňîâŕ, îň ęîĺňî čěŕ íóćäŕ."
-
-#: ../../help.pm_.c:77
-#, fuzzy
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ńĺăŕ ĺ ěîěĺíňúň äŕ îďđĺäĺëčňĺ ęîč ďđîăđŕěč čńęŕňĺ äŕ áúäŕň číńňŕëčđŕíč íŕ\n"
-"ńčńňĺěŕňŕ âč. Â Mandrake Linux äčńňđčáóöč˙ňŕ čěŕ őčë˙äč ďŕęĺňč, íî íĺ ĺ\n"
-"çŕäúëćčňĺëíî äŕ ăč çíŕĺňĺ íŕčçóńň.\n"
-"\n"
-"Ŕęî čçâúđřâŕňĺ ńňŕíäŕđňíŕ číńňëŕöč˙ îň CDROM, ďúđâî ůĺ áúäĺňĺ ďîďčňŕíč ęîč\n"
-"CD-ňŕ čěŕňĺ (â Ĺęńďĺđňĺí đĺćčě). Ďđîâĺđĺňĺ çŕăëŕâč˙ňŕ íŕ CD-ňŕňŕ č ďîńî÷ĺňĺ\n"
-"ęóňčéęčňĺ ńúîňâĺňńňâŕůč íŕ CD-ňŕňŕ, ń ęîčňî đŕçďîëŕăŕňĺ. Öúęíĺňĺ \"OK\",\n"
-"ęîăŕňî ńňĺ ăîňîâč äŕ ďđîäúëćčňĺ.\n"
-"\n"
-"Ďŕęĺňčňĺ ńŕ ďîäđĺäĺíč â ăđóďč ńúîňâĺňńňâŕůč íŕ ďđŕęňč÷ĺńęŕňŕ óďîňđĺáŕ íŕ\n"
-"ěŕřčíŕňŕ âč. Ăđóďčňĺ, ńŕěč ďî ńĺáĺ ńč, ńŕ ďîäđĺäĺíč â ÷ĺňčđč ńĺęöčč:\n"
-"\n"
-" * \"Đŕáîňíŕ ńňŕíöč˙\": ŕęî ńě˙ňŕňĺ äŕ čçďîëçâŕňĺ ěŕřčíŕňŕ ńč ęŕňî đŕáîňíŕ "
-"ńňŕíöč˙,\n"
-"čçáĺđĺňĺ ĺäíŕ čëč ďîâĺ÷ĺ ńúîňâĺňíčňĺ ăđóďč.\n"
-"\n"
-" * \"Đŕçđŕáîňęŕ\": ŕęî ěŕřčíŕňŕ âč ůĺ áúäĺ čçďîëçâŕíĺ çŕ ďđîăđŕěčđŕíĺ, "
-"čçáĺđĺňĺ\n"
-"ćĺëŕíŕňŕ(čňĺ) ăđóďŕ(č).\n"
-"\n"
-" * \"Ńúđâúđ\": íŕęđŕ˙, ŕęî ěŕřčíŕňŕ âč ůĺ áúäĺ čçďîëçâŕíŕ çŕ ńúđâúđ, ůĺ\n"
-"ěîćĺňĺ äŕ čçáĺđĺňĺ ęîč îň íŕé-÷ĺńňî čçďîëçâŕíčňĺ óńëóăč čńęŕňĺ äŕ čěŕňĺ\n"
-"číńňŕëčđŕíč íŕ ěŕřčíŕňŕ.\n"
-"\n"
-" * \"Ăđŕôč÷íŕ ńđĺäŕ\": ňóę ěîćĺňĺ äŕ čçáĺđĺňĺ ďđĺäďî÷čňŕíŕňŕ ăđŕôč÷íŕ "
-"ńđĺäŕ.\n"
-"Ďîíĺ ĺäíŕ ňđ˙áâŕ äŕ áúäĺ čçáđŕíŕ, ŕęî čńęŕňĺ äŕ čěŕňĺ ăđŕôč÷íŕ ńđĺäŕ !\n"
-"\n"
-"Ďđĺěĺńňâŕéęč ęóđńîđŕ íŕ ěčříŕňŕ íŕä čěĺňî íŕ ăđóďŕňŕ, ůĺ âčäčňĺ ęđŕňúę\n"
-"îá˙ńíĺíčňĺëĺí ňĺęńň çŕ íĺ˙.\n"
-"\n"
-"Ěîćĺňĺ äŕ öúęíĺňĺ ęóňčéęŕňŕ \"Číäčâčäóŕëĺí čçáîđ íŕ ďŕęĺňč\", ęî˙ňî ĺ "
-"ďîëĺçíŕ,\n"
-"ŕęî ńňĺ çŕďîçíŕňč ń ďŕęĺňčňĺ, ęîčňî ůĺ âč áúäŕň ďđĺäëîćĺíč čëč ŕęî čńęŕňĺ "
-"äŕ\n"
-"čěŕňĺ ďúëĺí ęîíňđîë íŕä ňîâŕ, ęîĺňî äŕ áúäĺ číńňŕëčđŕíî.\n"
-"\n"
-"Ŕęî ńňĺ çŕďî÷íŕëč číńňŕëŕöč˙ňŕ â đĺćčě íŕ \"Îáíîâ˙âŕíĺ\", ěîćĺňĺ äŕ "
-"čçęëţ÷čňĺ\n"
-"âńč÷ęč ăđóďč, çŕ äŕ čçáĺăíĺňĺ číńňŕëčđŕíĺňî íŕ íîâč ďŕęĺňč. Ňîâŕ ĺ ďîëĺçíî\n"
-"ďđč ďîďđŕâęŕ čëč îáíîâ˙âŕíĺ íŕ ńúůĺńňâóâŕůŕňŕ ńčńňĺěŕ."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Íŕęđŕ˙, â çŕâčńčěîńň îň čçáîđŕ âč äŕëč äŕ čçáčđŕňĺ ďŕęĺňč ĺäčí ďî ĺäčí, ůĺ\n"
-"âč áúäĺ ďđĺäńňŕâĺíî äúđâî ńúäúđćŕůî âńč÷ęč ďŕęĺňč ďîäđĺäĺíč ďî ăđóďč č\n"
-"ďîäđăđóďč. Äîęŕňî îáőîćäŕňĺ äúđâîňî, ěîćĺňĺ äŕ čçáĺđĺňĺ öĺëč ăđóďč, "
-"ďîäăđóďč\n"
-"čëč îňäĺëíč ďŕęĺňč.\n"
-"\n"
-"Ęîăŕňî ďîńî÷čňĺ ďŕęĺň îň äúđâîňî, ůĺ ńĺ ďî˙âč îďčńŕíčĺ âä˙ńíî. Ęîăŕňî\n"
-"čçáîđúň ĺ ďđčęëţ÷ĺí, öúęíĺňĺ áóňîíŕ \"Číńňŕëčđŕé\", ęîéňî ůĺ ďóńíĺ ďđîöĺńŕ\n"
-"íŕ číńňŕëŕöč˙. Â çŕâčńčěîńň îň ńęîđîńňňŕ íŕ őŕđäóĺđŕ âč č áđî˙ íŕ ďŕęĺňčňĺ,\n"
-"ęîčňî čńęŕňĺ äŕ áúäŕň číńňŕëčđŕíč, ďđîöĺńúň ěîćĺ äŕ îňíĺěĺ čçâĺńňíî âđĺěĺ.\n"
-"Î÷ŕęâŕíîňî âđĺěĺ çŕ ďđčęëţ÷âŕíĺ íŕ ďđîöĺńŕ, ÷ĺ áúäĺ ďîęŕçŕíî íŕ ĺęđŕňŕ, çŕ\n"
-"äŕ âč ďîěîăíĺ äŕ ďđĺöĺíčňĺ äŕëč čěŕňĺ äîńňŕňú÷íî âđĺěĺ äŕ ńĺ íŕńëŕäčňĺ íŕ\n"
-"÷ŕřŕ ęŕôĺ.\n"
-"\n"
-"!! Ŕęî ĺ čçáđŕí ńúđâúđĺí ďŕęĺň, áčëî ňî óěčřëĺíî čëč çŕůîňî ĺ ÷ŕńň îň ö˙ëŕ\n"
-"ăđóďŕ, ůĺ áúäĺňĺ ďîěîëĺíč çŕ ďîňâúđćäĺíčĺ, ÷ĺ íŕčńňčíŕ čńęŕňĺ ňîçč ńúđâúđ\n"
-"äŕ áúäĺ číńňŕëčđŕí.  Mandrake Linux, âńč÷ęč ńúđâúđč ňđúăâŕň ďî "
-"ďîäđŕçáčđŕíĺ\n"
-"ďđč çŕđĺćäŕíĺ.Äŕćĺ ŕęî ńŕ ńčăóđíč č í˙ěŕň čçâĺńňíč ďđîáëĺěč, ęîăŕňî\n"
-"äčńňđčáóöč˙ňŕ ńĺ đŕçďđîńňđŕí˙âŕ, ěîćĺ äŕ ńĺ ńëó÷č ňŕęŕ, ÷ĺ äŕ ńĺ ďî˙â˙ň\n"
-"äóďęč â ńčăóđíîńňňŕ, ńëĺä ęŕňî âĺđńč˙ňŕ íŕ Mandrake Linux ĺ çŕâúđřĺíŕ. Ŕęî\n"
-"íĺ çíŕĺňĺ çŕ ęŕęâî ńëóćč îďđĺäĺëĺíŕ óńëóăŕ čëč çŕůî ĺ číńňŕëčđŕíŕ, öúęíĺňĺ\n"
-"\"Íĺ\". Ń öúęŕíĺ íŕ \"Äŕ\" ůĺ číńňŕëčđŕňĺ čçáđîĺíč óńëóăč č ňĺ ůĺ áúäŕň\n"
-"ńňŕđňčđŕíč ŕâňîěŕňč÷íî ďî ďîäđŕçáčđŕíĺ. !!\n"
-"\n"
-"Îďöč˙ňŕ \"Ŕâňîěŕňč÷íč çŕâčńčěîńňč\" čçęëţ÷âŕ ďđĺäóďđĺäčňĺëíčňĺ äčŕëîçč,\n"
-"ęîăŕňî číńňŕëŕňîđúň ŕâîěŕňč÷íî đĺřč čçáĺđĺ ďŕęĺň. Ňîâŕ ńĺ ńëó÷âŕ, çŕůîňî\n"
-"ĺ đĺřčë, ÷ĺ ńĺ íóćäŕĺ äŕ çŕäîâîëč çŕâčńčěîńň ń äđóă ďŕęĺň, çŕ äŕ ďđčęëţ÷č\n"
-"óńďĺříî číńňŕëŕöč˙ňŕ.\n"
-"\n"
-"Ěŕëęŕňŕ čęîíęŕ íŕ äčńęĺňęŕ â äúíîňî íŕ ńďčńúęŕ ďîçâîë˙âŕ äŕ çŕđĺäčňĺ ńďčńúę\n"
-"ń ďŕęĺňč îň ďđĺäčříŕ číńňŕëŕöč˙. Ŕęî öúęíĺňĺ íŕ ňŕçč čęîíęŕ, ůĺ áúäĺňĺ\n"
-"ďîěîëĺíč äŕ âęŕđŕňĺ äčńęĺňŕ ńúçäŕäĺíŕ ďđĺäč ňîâŕ â ęđŕ˙ íŕ äđóăŕ "
-"číńňŕëŕöč˙.\n"
-"Âčćňĺ âňîđŕňŕ ďîäńęŕçęŕ ďî âđĺěĺ íŕ ďîńëĺäíŕňŕ ńňúďęŕ, çŕ ňîâŕ ęŕę äŕ\n"
-"ńúçäŕäĺňĺ ňŕęŕâŕ äčńęĺňŕ."
-
-#: ../../help.pm_.c:164
-#, fuzzy
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Ŕęî čńęŕňĺ äŕ ńâúđćĺňĺ ęîěďţňúđŕ ńč ęúě Číňĺđíĺň čëč ęúě ëîęŕëíŕ ěđĺćŕ, "
-"ěîë˙\n"
-"čçáĺđĺňĺ ďîäőîä˙ůŕňŕ îďöč˙. Ěîë˙, âęëţ÷ĺňĺ óńňđîéńňâîňî ńč ďđĺäč äŕ "
-"čçáĺđĺňĺ\n"
-"îďöč˙ňŕ, çŕ äŕ äŕäĺňĺ âúçěîćíîńň íŕ DrakX äŕ ăî çŕńĺ÷ĺ.\n"
-"\n"
-"Mandrake Linux čçâúđřâŕ íŕńňđîéęŕňŕ íŕ Číňĺđíĺň âđúçęŕňŕ ďî âđĺěĺ íŕ\n"
-"číńňŕëŕöč˙. Äîńňúďíčňĺ âđúçęč: îáčęíîâĺí ěîäĺě, ISDN ěîäĺě, ADSL âđúçęŕ,\n"
-"ęŕáĺëĺí ěîäĺě č íŕęđŕ˙ îáčęíîâĺíŕ LAN âđúçęŕ (Ethernet).\n"
-"\n"
-"Ňóę í˙ěŕ ďîäđîáíî äŕ đŕçăëĺćäŕěĺ âń˙ęŕ íŕńňđîéęŕ. Ďđîńňî áúäĺňĺ ńčăóđíč, ÷ĺ\n"
-"čěŕňĺ äîńňŕňú÷íî äŕííč îň Číňĺđíĺň äîńňŕâ÷čęŕ ńč čëč ńčńňĺěíč˙\n"
-"ŕäěčíńčňđŕňîđ.\n"
-"\n"
-"Ěîćĺňĺ äŕ ńĺ ęîíńóëňčđŕňĺ ń ăëŕâŕňŕ â đúęîâîäńňâîňî çŕ Číňĺđíĺň âđúçęčňĺ çŕ\n"
-"ďîäđîáíîńňč çŕ íŕńňđîéęŕňŕ čëč ďđîńňî čç÷ŕęŕéňĺ ńčńňĺěŕňŕ âč äŕ áúäĺ\n"
-"číńňŕëčđŕíŕ č čçďîëçâŕéňĺ ďđîăđŕěŕňŕ îďčńŕíŕ ňŕě, çŕ äŕ íŕńňđîčňĺ âđúçęŕňŕ.\n"
-"\n"
-"Ŕęî čńęŕňĺ äŕ íŕńňđîčňĺ ěđĺćŕňŕ ďî-ęúńíî ńëĺä číńňŕëŕöč˙ čëč ŕęî ńňĺ "
-"ńâúđřčëč\n"
-"ń íŕńňđîéęŕňŕ íŕ ěđĺćŕňŕ, öúęíĺňĺ \"Îňęŕç\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ńĺăŕ ěîćĺňĺ äŕ čçáĺđĺňĺ ęîč óńëóăč äŕ ńĺ ďóńęŕň ďđč ńňŕđňčđŕíĺ.\n"
-"\n"
-"Ňóę ńŕ ďđĺäńňŕâĺíč âńč÷ęč óńëóăč, äîńňúďíč ń íŕńňî˙ůŕňŕ číńňŕëŕöč˙.\n"
-"Ďđĺăëĺäŕéňĺ ăč âíčěŕňĺëíî č čçęëţ÷ĺňĺ ňĺçč, ęîčňî íĺ âč ňđ˙áâŕň âčíŕăč ďđč "
-"ńňŕđňčđŕíĺ.\n"
-"\n"
-"Ěîćĺňĺ âčäčňĺ ęđŕňúę îá˙ńíčňĺëĺí ňĺęńň çŕ óńëóăŕňŕ, ęŕňî ďîńňŕâčňĺ ęóđîđŕ íŕ "
-"ěčřęŕňŕ ńč\n"
-"íŕä čěĺňî íŕ óńëóăŕňŕ. Ŕęî íĺ ńňĺ ńčăóđíč, äŕëč óńëóăŕňŕ ĺ ďîëĺçíŕ čëč íĺ, "
-"ďî-äîáđĺ\n"
-"ĺ äŕ îńňŕâčňĺ čçáîđŕ ďî ďîäđŕçáčđŕíĺ.\n"
-"\n"
-"Âíčěŕâŕéňĺ ń ňŕçč ńňúďęŕ, ŕęî ńě˙ňŕňĺ äŕ čçďîëçâŕňĺ ěŕřčíŕňŕ ńč ęŕňî "
-"ńúđâúđ:\n"
-"ńčăóđíî íĺ áčőňĺ čńęŕëč äŕ ďóńęŕňĺ óńëóăč, îň ęîčňî íĺ ńĺ íóćäŕĺňĺ. Ěîë˙,\n"
-"çŕďîěíĺňĺ, ÷ĺ í˙ęîč óńëóăč ěîăŕň äŕ áúäŕň îďŕńíč, ŕęî ńŕ âęëţ÷ĺíč íŕ "
-"ńúđâúđŕ.\n"
-"Ďî ďđčíöčď, čçáčđŕéňĺ ńŕěî óńëóăčňĺ, îň ęîčňî íŕčńňčíŕ ńĺ íóćäŕĺňĺ."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-#, fuzzy
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (îđ X Window System) ĺ ńúđöĺňî íŕ GNU/Linux ăđŕôč÷íč˙ číňĺđôĺéń, íŕ ęîéňî\n"
-"ńĺ îńëŕí˙ň ăđŕôč÷íčňĺ ńđĺäč (KDE, Gnome, AfterStep, WindowMaker...) "
-"ńâúđçŕíč\n"
-"ń Mandrake Linux.  ňŕçč ńĺęöč˙, DrakX ůĺ ńĺ ŕâňîěŕňč÷íî äŕ íŕńňđîč X.\n"
-"\n"
-"Čçęëţ÷čňĺëíî đ˙äęî ńĺ ńëó÷âŕ äŕ ńĺ ďđîâŕëč, îńâĺí ŕęî őŕđäóĺđúň íĺ ĺ ěíîăî\n"
-"ńňŕđ (čëč ďđĺęŕëĺíî íîâ). Ŕęî óńďĺĺ, ůĺ ńňŕđňčđŕ X ŕâňîěŕňč÷íî ń íŕé-"
-"äîáđŕňŕ\n"
-"đŕçäĺëčňĺëíŕ ńďîńîáíîńň â çŕâčńčěîńň îň ăîëĺěčíŕňŕ íŕ ěîíčňîđŕ âč. Ůĺ ńĺ\n"
-"ďî˙âč ďđîçîđĺö, çŕ äŕ âč ďîďčňŕ äŕëč ăî âčćäŕňĺ.\n"
-"\n"
-"Ŕęî čçâúđřâŕňĺ \"Ĺęńďĺđňíŕ\" číńňŕëŕöč˙, ůĺ áúäĺňĺ âúâĺäĺíč â ěŕăüîńíčęŕ çŕ\n"
-"íŕńňđîéęŕ íŕ X. Âčćňĺ ńúîňâĺňíŕňŕ ńĺęöč˙ íŕ đúęîâîäńňâîňî çŕ ďîâĺ÷ĺ\n"
-"číôîđěŕöč˙ çŕ ěŕăüîńíčęŕ.\n"
-"\n"
-"Ŕęî âčäčňĺ ńúîáůĺíčĺňî, íŕňčńíĺňĺ \"Äŕ\", ńëĺä ęîĺňî DrakX ůĺ ďđîäúëćč ńúń\n"
-"ńëĺäâŕůŕňŕ ńňúďęŕ. Ŕęî íĺ âčäčňĺ ńúîáůĺíčĺňî, ňîâŕ îçíŕ÷ŕâŕ, ÷ĺ íŕńňđîéęŕňŕ\n"
-"ĺ ńăđĺřĺíŕ č ňĺńňúň ŕâňîěŕňč÷íî ůĺ áúäĺ ďđčęëţ÷ĺí ńëĺä 10 ńĺęóíäč,\n"
-"âúçńňŕíîâ˙âŕéęč ĺęđŕíŕ."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Ďúđâč˙ ďúň, ęîăŕňî îďčňŕňĺ íŕńňđîéęŕňŕ íŕ X, ěîćĺ áč í˙ěŕ äŕ ńňĺ äîâîëíč îň\n"
-"îň âčäŕ (ĺęđŕíúň ĺ ďđĺęŕëĺíî ěŕëúę, îňěĺńňĺí íŕë˙âî čëč íŕä˙ńíî...). "
-"Âúďđĺęč\n"
-"ňîâŕ, äŕćĺ ŕęî X ňđúăíĺ ęŕňî őîđŕňŕ, DrakX ůĺ âč ďîďčňŕ äŕëč íŕńňđîéęŕňŕ âč\n"
-"äîďŕäŕ. Ńúůî ňŕęŕ, ÷ĺ âč ďđĺäëîćč ďđîě˙íŕ, ęŕňî ďîęŕćĺ ńďčńúę íŕ âŕëčäíč\n"
-"đĺćčěč, ęîčňî ĺ óńď˙ë äŕ íŕěĺđč, ń ěîëáŕ äŕ ďîńî÷čňĺ ĺäčí.\n"
-"\n"
-"Ęŕňî ďîńëĺäíŕ âúçěîćíîńň, ŕęî âńĺ îůĺ íĺ ěîćĺňĺ äŕ ďîäęŕđŕňĺ X, čçáĺđĺňĺ\n"
-"\"Ďđîě˙íŕ íŕ ăđŕôč÷íŕňŕ ęŕđňŕ\", ďîńî÷čňĺ \"Íĺčçáđîĺíŕ ęŕđňŕ\", č, ęîăŕňî\n"
-"áúäĺňĺ ďîďčňŕíč ęîé ńúđâúđ äŕ áúäĺ čçďîëçâŕí, čçáĺđĺňĺ \"FBDev\". Ňîâŕ ĺ\n"
-"áĺçăđĺříŕ îďöč˙, ęî˙ňî đŕáîňč íŕ âń˙ęŕ ďî-íîâŕ ęŕđňŕ. Ňîăŕâŕ čçáĺđĺňĺ "
-"\"Îďčňŕé ďŕę\", çŕ äŕ ńňĺ ńčăóđíč."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Íŕęđŕ˙, ůĺ áúäĺňĺ ďîďčňŕíč äŕëč čńęŕňĺ äŕ âčćäŕňĺ ăđŕôč÷íč˙ číňĺđôĺéń ďđč\n"
-"çŕđĺćäŕíĺ. Îňáĺëĺćĺňĺ, ÷ĺ ňîçč âúďđîń ůĺ âč áúäĺ çŕäŕäĺí äŕćĺ ŕęî čçáĺđĺňĺ,\n"
-"äŕ íĺ ňĺńňâŕňĺ íŕńňđîéęŕňŕ. Î÷ĺâčäíî, áčőňĺ îňăîâîđčëč ń \"Íĺ\", ŕęî "
-"ěŕřčíŕňŕ\n"
-"ůĺ đŕáîňč ęŕňî ńúđâúđ čëč ŕęî í˙ěŕ óńďĺříî íŕńňđîĺí äčńďëĺé."
-
-#: ../../help.pm_.c:256
-#, fuzzy
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux CDROM-úň čěŕ âăđŕäĺí ńďŕńčňĺëĺí đĺćčě. Ěîćĺňĺ äŕ ăî\n"
-"äîńňčăíĺňĺ, ęŕňî ńňŕđňčđŕňĺ îň CDROM-ŕ, íŕňčńíĺňĺ ęëŕâčřŕ >>F1<< č íŕďčřĺňĺ\n"
-">>rescue<<. Íî ńëó÷ŕé, ÷ĺ ęîěďţňúđúň íĺ ěîćĺ äŕ ńňŕđňčđŕ îň CDROM, ůĺ "
-"ňđ˙áâŕ\n"
-"äŕ ńĺ âúđíĺňĺ ęúě ňŕçč ńňúďęŕ çŕ ďîěîů â ďîíĺ äâĺ ńčňóŕöčč:\n"
-"\n"
-" * ęîăŕňî čńíňŕëčđŕňĺ boot loader, DrakX ůĺ ďđĺçŕďčřĺ ńňŕđňîâč˙ ńĺęňîđ (MBR) "
-"íŕ ăëŕâíč˙ âč äčńę (îńâĺí ŕęî íĺ čçďîëçâŕňĺ äđóă ńňŕđňîâ ěĺíčäćúđ), ňŕęŕ ÷ĺ\n"
-"äŕ ńňŕđňčđŕňĺ Windows čëč GNU/Linux (ŕęî čěŕňĺ Windows â ńčńňĺěŕňŕ ńč). Ŕęî\n"
-"ńĺ íóćäŕĺňĺ äŕ ďđĺčíńňŕëčđŕňĺ Windows, číńňŕëŕöčîííč˙ ďđîöĺń íŕ Microsoft\n"
-"ůĺ ďđĺçŕďčřĺ ńňŕđňîâč˙ ńĺęňîđ č í˙ěŕ äŕ ěîćĺňĺ äŕ ďóńíĺňĺ âŕřč˙ GNU/Linux!\n"
-"\n"
-" * ŕęî ńĺ ďî˙âč ďđîáëĺě č íĺ ěîćĺňĺ äŕ ďóńíĺňĺ GNU/Linux îň ňâúđäč˙ ńč "
-"äčńę,\n"
-"ňŕçč äčńęĺňŕ ůĺ čěŕ çŕ öĺë ńŕěî äŕ ńňŕđňčđŕ GNU/Linux. Ň˙ ńúäúđćŕ "
-"çŕäîâîëčňĺëĺí\n"
-"áđîé ńčńňĺěíč číńňđóěĺíňč çŕ âúçńňŕíîâ˙âŕíĺ íŕ ńčńňĺěŕ, ęî˙ňî ĺ çŕáčëŕ ńëĺä\n"
-"ńđčâ â çŕőđŕíâŕíĺňî, ńëó÷ŕéíŕ ăđĺřęŕ, ăđĺřęŕ â ďŕđîëŕňŕ čëč í˙ęŕęâŕ äđóăŕ\n"
-"ďđč÷číŕ.\n"
-"\n"
-"Ęîăŕňî öúęíĺňĺ íŕ ňŕçč ńňúďęŕ, ůĺ áúäĺňĺ ďîěîëĺíč äŕ ďîńňŕâčňĺ äčńę â\n"
-"óńňđîéńňâîňî. Äčńęĺňŕňŕ, ęî˙ňî âęŕđŕňĺ, ňđ˙áâŕ äŕ áúäĺ ďđŕçíŕ čëč äŕ "
-"ńúäúđćŕ\n"
-"äŕííč, îň ęîčňî íĺ ńĺ íóćäŕĺňĺ. Í˙ěŕ íóćäŕ äŕ ˙ ôîđěŕňčđŕňĺ, ňúé ęŕňî DrakX\n"
-"ůĺ ďđĺçŕďčřĺ ö˙ëŕňŕ äčńęĺňŕ."
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Â ňîçč ěîěĺíň ňđ˙áâŕ čçáĺđĺňĺ ęúäĺ íŕ ňâúđäč˙ ńč äčńęŕ äŕ číńňŕëčđŕňĺ "
-"âŕřŕňŕ\n"
-"Mandrake Linux îďĺđŕöčîííŕ ńčńňĺěŕ. Ŕęî ňâúđäč˙ň âč äčńę ĺ ďđŕçĺí čëč äđóăŕ\n"
-"îďĺđŕöčîííŕ ńčńňĺěŕ čçďîëçâŕ ö˙ëîňî ďđîńňđŕíńňâî, ůĺ ňđ˙áâŕ äŕ ăî "
-"đŕçäĺëčňĺ.\n"
-"Ęŕçŕíî ďđîńňč÷ęî, đŕçäĺë˙íĺňî íŕ ňâúđäč˙ äčńę ńĺ ńúńňîč â ëîăč÷ĺńęî "
-"đŕçäĺë˙íĺ\n"
-"öĺë äŕ ńĺ ńúçäŕäĺ ě˙ńňî çŕ číńňŕëŕöč˙ íŕ íîâŕňŕ Mandrake Linux ńčńňĺěŕ.\n"
-"\n"
-"Ňúé ęŕňî ďđîöĺńúň íŕ đŕçäĺë˙íĺ îáčęíîâĺíî ĺ íĺîáđŕňčě, đŕçäĺë˙íĺňî ěîćĺ äŕ\n"
-"čçăëĺćäŕ ďëŕřĺů č ńňđ˙ńęŕů, ŕęî ńňĺ íĺîďčňĺí ďîňđĺáčňĺë. Ńëŕâŕ Áîăó, čěŕ\n"
-"ěŕăüîńíčę, ęîéňî îďđîńň˙âŕ ňîçč ďđîöĺń. Ďđĺäč äŕ çŕďî÷íĺňĺ, ęîíńóëňčđŕéňĺ "
-"ńĺ\n"
-"ń đúęîâîäńňâîňî č íĺ áúđçŕéňĺ.\n"
-"\n"
-"Ŕęî ďóńęŕňĺ číńňŕëŕöč˙ňŕ â Ĺęńďĺđňĺí đĺćčě, ůĺ áúäĺňĺ âúâĺäĺíč â DiskDrake,\n"
-"đŕçäĺë˙ůč˙ číńňđóěĺíň íŕ Mandrake Linux, ęîéňî âč ďîçâîë˙âŕ äŕ äîíŕńňđîčňĺ\n"
-"ä˙ëîâĺňĺ ńč. Âčćňĺ ăëŕâŕňŕ DiskDrake îň đúęîâîäńňâîňî. Îň číńňŕëŕöčîííč˙\n"
-"číňĺđôĺéń ěîćĺňĺ äŕ čçďîëçâŕňĺ ěŕăüîńíčöčňĺ, ęŕňî íŕňčńíĺňĺ áóňîíŕ\n"
-"\"Ěŕăüîńíčę\" íŕ äčŕëîăŕ.\n"
-"\n"
-"Ŕęî ä˙ëîâĺňĺ ńŕ âĺ÷ĺ îďđĺäĺëĺíč, äŕëč îň ďđĺäčříŕ číńňŕëŕöč˙ čëč îň äđóă\n"
-"čńňđóěĺíň çŕ đŕçäĺë˙íĺ, ďđîńňî čçáĺđĺňĺ íŕ ęîé äŕ číńňŕëčđŕňĺ Linux\n"
-"ńčńňĺěŕňŕ.\n"
-"\n"
-"Ŕęî ä˙ëîâĺňĺ íĺ ńŕ îďđĺäĺëĺíč, ůĺ ňđ˙áâŕ äŕ ńúçäŕäĺňĺ ňŕęčâŕ čçďîëçâŕéęč\n"
-"ěŕăüîńíčęŕ. Â çŕâčńčěîńň îň íŕńňđîéęŕňŕ íŕ ňâúđäč˙ äčńę, ńŕ âúçěîćíč "
-"í˙ęîëęî\n"
-"îďöčč:\n"
-"\n"
-" * \"Čçďîëçâŕé ńâîáîäíîňî ďđîńňđŕíńňâî\": ňŕçč îďöč˙ ďđîńňî ůĺ äîâĺäĺ ňî\n"
-"ŕâňîěŕňč÷íî ďîäĺë˙íĺ íŕ ďđŕçíîňî ďđîńňđŕíńňâî íŕ ňâúđäč˙ âč äčńę. Í˙ěŕ äŕ\n"
-"áúäĺňĺ ďčňŕíč çŕ ňîâŕ.\n"
-"\n"
-" * \"Čçďîëçâŕé ńúůĺńňâóâŕů ä˙ë\": ěŕăüîńíčęúň ĺ çŕń˙ęúë ĺäčí čëč ďîâĺ÷ĺ\n"
-"ńúůĺńňâóâŕůč Linux ä˙ëîâĺ íŕ ňâúđäč˙ âč äčńę. Ŕęî čńęŕňĺ äŕ ăč čçďîëçâŕňĺ,\n"
-"čçáĺđĺňĺ ňŕçč îďöč˙.\n"
-"\n"
-" * \"Čçďîëçâŕé ńâîáîäíîňî ďđîńňđŕíńňâî íŕ Windows ä˙ë\": ŕęî čěŕňĺ "
-"číńňŕëčđŕí\n"
-"Microsoft Windows íŕ ňâúđäč˙ ńč äčńę č ňîé çŕĺěŕ ö˙ëîňî äîńňúďíî\n"
-"ďđîńňđŕíńňâî íŕ íĺăî, ňđ˙áâŕ äŕ îńâîáîäčňĺ ě˙ńňî çŕ Linux äŕííč. Çŕ äŕ\n"
-"íŕďđŕâčňĺňîâŕ, ěîćĺňĺ äŕ čçňđčĺňĺ Microsoft Windows ä˙ëŕ č äŕííčňĺ (âčćňĺ\n"
-"đĺřĺíč˙ňŕ \"Čçňđčé öĺëč˙ äčńę\" čëč \"Ĺęďĺđňĺí đĺćčě\") čëč äŕ ďđîěĺíčňĺ\n"
-"ăîëĺěčíŕňŕ íŕ Microsoft Windows ä˙ëŕ. Ďđîě˙íŕňŕ íŕ ăîëĺěčíŕňŕ ěîćĺ äŕ áúäĺ\n"
-"čçâúđřĺíŕ áĺç çŕăóáŕ íŕ äŕííč. Ňîâŕ đĺřĺíčĺ ńĺ ďđĺďîđú÷âŕ, ŕęî čńęŕňĺ\n"
-"ĺäíîâđĺěĺííî Mandrake Linux č Microsoft Windows íŕ ĺäčí č ńúůč ęîěďţňúđ.\n"
-"\n"
-" Ďđĺäč äŕ čçáĺđĺňĺ ňŕçč îďöč˙, ěîë˙, đŕçáĺđĺňĺ, ÷ĺ ńëĺä ňŕçč ďđîöĺäóđŕ,\n"
-"ăîëĺěčíŕňŕ íŕ Microsoft Windows ä˙ëŕ ůĺ áúäĺ ďî-ěŕëęŕ, îňęîëęîňî ďđĺäč "
-"ňîâŕ.\n"
-"Ůĺ čěŕňĺ ďî-ěŕëęî ě˙ńňî ďîä Microsoft Windows çŕ ńúőđŕí˙âŕíĺ íŕ äŕííč čëč "
-"çŕ\n"
-"číńňŕëčđŕ íŕ íîâ ńîôňóĺđ.\n"
-"\n"
-" * \"Čçňđčé öĺëč˙ äčńę\": ŕęî čńęŕňĺ äŕ čçňđčĺňĺ âńč÷ęč äŕííč č ä˙ëîâĺ, "
-"ęîčňî\n"
-"ńúůĺńňâóâŕň íŕ âŕřč˙ ňâúđä äčńę č äŕ ăč çŕěĺíčňĺ ń íîâŕňŕ Mandrake Linux\n"
-"ńčńňĺěŕ, čçáĺđĺňĺ ňŕçč îďöč˙. Áúäĺňĺ âíčěŕňĺëíč ń ňîâŕ đĺřĺíč˙, çŕůîňî í˙ěŕ\n"
-"äŕ ěîćĺňĺ äŕ âúđíĺňĺ îáđŕňíî čçáîđŕ ńč, ńëĺä ęŕňî ďîňâúđäčňĺ.\n"
-"\n"
-" !! Ŕęî čçáĺđĺňĺ ňŕçč îďöč˙, âńč÷ęč äŕííč íŕ äčńęŕ âč ůĺ áúäŕň "
-"çŕăóáĺíč !!\n"
-"\n"
-" * \"Čçňđčé Windows\": Ňîâŕ ďđîńňî ůĺ čçňđčĺ âńč÷ęî íŕ äčńęŕ č ůĺ çŕďî÷íĺ "
-"íŕ\n"
-"÷čńňî, đŕçäĺë˙íĺ îň đŕç. Âń˙ęŕęâč äŕííč íŕ äčńęŕ âč ůĺ áúäŕň çŕăóáĺíč.\n"
-"\n"
-" !! Ŕęî čçáĺđĺňĺ ňŕçč îďöč˙, âńč÷ęč äŕííč íŕ äčńęŕ âč ůĺ áúäŕň "
-"çŕăóáĺíč !!\n"
-"\n"
-" * \"Ĺęńďĺđňĺí đĺćčě\": čçáĺđĺňĺ ňŕçč îďöč˙, ŕęî čńęŕňĺ đú÷íî äŕ đŕçäĺëčňĺ\n"
-"ňâúđäč˙ ńč äčńę. Áúäĺňĺ âíčěŕňĺëíč - ňîâŕ ĺ ěîůĺí, íî îďŕńĺí čçáîđ. Ěîćĺňĺ\n"
-"ěíîăî ëĺńíî äŕ çŕăóáčňĺ âńč÷ęč äŕííč. Ňŕęŕ ÷ĺ íĺ čçáčđŕéňĺ ňîâŕ, ŕęî íĺ\n"
-"çíŕĺňĺ ęŕęâî ďđŕâčňĺ."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Ŕ ňŕęŕ ! Číńňŕëŕöč˙ňŕ ĺ çŕâúđřĺíŕ č GNU/Linux ńčńňĺěŕňŕ âč ĺ ăîňîâŕ çŕ\n"
-"óďîňđĺáŕ. Ďđîńňî öúęíĺňĺ \"OK\", çŕ äŕ đĺńňŕđňčđŕňĺ ńčńňĺěŕňŕ. Ěîćĺňĺ äŕ\n"
-"ńňŕđňčđŕňĺ GNU/Linux čëč Windows, ęîĺňî ďđĺäďî÷čňŕňĺ (ŕęî čěŕňĺ äâĺ "
-"ńčńňĺěč),\n"
-"âĺäíŕăŕ ńëĺä ęŕňî ęîěďţňúđúň ńňŕđňčđŕ îňíîâî.\n"
-"\n"
-"Áóňîíŕ \"Íŕďđĺäíč÷ŕâ\" (ńŕěî â \"Ĺęńďĺđňĺí\") ďîęŕçâŕ îůĺ äâŕ áóňîíŕ çŕ:\n"
-"\n"
-" * \"ăĺíĺđčđŕíĺ íŕ äčńęĺňŕ çŕ ŕâňîěŕňč÷íŕ číńňŕëŕöč˙\": çŕ äŕ ńúçäŕäĺňĺ\n"
-"číńňŕëŕöčîííŕ äčńęĺňŕ, ęî˙ňî ńëĺä ňîâŕ ŕâňîěŕňč÷íî äŕ čç÷úđřâŕ ö˙ëŕňŕ\n"
-"číńňŕëŕöč˙ áĺç ďîěîůňŕ íŕ îďĺđŕňîđ, ďđčëč÷ŕůŕ íŕ číńňŕëŕöč˙ňŕ, ęî˙ňî ňîęó-"
-"ůî\n"
-"ńňĺ čçâúđřčëč.\n"
-"\n"
-" Îňáĺëĺćĺňĺ, ÷ĺ äâĺ đŕçëč÷íč îďöčč ńŕ äîńňúíč, ÷đĺç öúęŕíĺ íŕ áóňîíŕ:\n"
-"\n"
-" * \"Ďđĺčăđŕé\". Ňîâŕ ĺ ÷ŕńňč÷íî ŕâňîěŕňčçčđŕíŕ číńňŕëŕöč˙ ęŕňî ńňúďęčňĺ\n"
-"ďî đŕçäĺë˙íĺ íŕ ä˙ëîâĺ îńňŕâŕň číňĺđŕęňčâíč.\n"
-"\n"
-" * \"Ŕâňîěŕňč÷íŕ\". Íŕďúëíî ŕâňîěŕňč÷íŕ číńňŕëŕöč˙: ňâúđäč˙ň äčńę ńĺ\n"
-"ďđĺçŕďčńâŕ íŕďúëíî, âń˙ęŕęâč äŕííč ńĺ çŕăóáâŕň.\n"
-"\n"
-" Ňŕçč îńîáĺíîńň ĺ ěíîăî óäîáíŕ, ęîăŕňî číńňŕëčđŕňĺ ăîë˙ě áđîé ďîäîáíî\n"
-"ěŕřčíč. Âčćňĺ ńĺęöč˙ňŕ çŕ ŕâňîěŕňč÷íŕ číńňŕëŕöč˙ íŕ íŕřč˙ web-ńŕéň.\n"
-"\n"
-" * \"Çŕďŕçč čçáîđŕ íŕ ďŕęĺňč\"(*): çŕďŕçâŕ čçáîđŕ íŕ ďŕęĺňč, ňŕęŕ ęŕęňî "
-"ĺ\n"
-"íŕďđŕâĺí ďđĺäč. Ęîăŕňî ďđŕâčňĺ äđóăŕ číńňŕëŕöč˙, âęŕđŕéňĺ äčńęĺňŕňŕ â\n"
-"óńňđîéńňâîňî č ďóńíĺňĺ číńňŕëŕöč˙ňŕ äŕ âúđâč ÷đĺç ďîěîůíč˙ ĺęđŕí, ęŕňî\n"
-"íŕňčńíĺňĺ ęëŕâčřŕ [F1] č ęŕňî íŕďčřĺňĺ >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Ňđ˙áâŕ âč FAT-ôîđěŕňčđŕíŕ äčńęĺňŕ (çŕ äŕ ńúçäŕäĺňĺ ňŕęâŕ ďîä GNU/Linux,\n"
-"íŕďčřĺňĺ \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Âńč÷ęč íîâîäĺôčíčđŕíč ä˙ëîâĺ ňđ˙áâŕ äŕ áúäŕň ôîđěŕňčđŕíč, çŕ äŕ ńĺ "
-"čçďîëçâŕň\n"
-"(ôîđěŕňčđŕíĺ îçíŕ÷ŕâŕ ńúçäŕâŕíĺ íŕ ôŕéëîâŕ ńčńňĺěŕ).\n"
-"\n"
-"Â ňîçč ěîěĺíňŕ ěîćĺ áč čńęŕňĺ äŕ ďđĺôîđěŕňčđŕňĺ í˙ęîč ńúůĺńňâóâŕůč ä˙ëîâĺ, "
-"çŕ\n"
-"äŕ čçňđčĺňĺ âń˙ęŕęâč äŕííč, ęîčňî ńúäúđćŕň. Ŕęî čńęŕňĺ äŕ ăî íŕďđŕâčňĺ, "
-"ěîë˙\n"
-"čçáĺđĺňĺ ň˙ő.\n"
-"\n"
-"Ěîë˙, îňáĺëĺćĺňĺ, ÷ĺ íĺ ĺ íĺîáőîäčěî äŕ ďđĺôîđěŕňčđŕňĺ âńč÷ęč ä˙ëîâĺ\n"
-"ńúůĺńňâóâŕůč îňďđĺäč. Ňđ˙áâŕ äŕ ďđĺôîđěŕňčđŕňĺ ä˙ëîâĺňĺ ńúäúđćŕůč\n"
-"îďĺđŕöčîííŕňŕ ńčńňĺěŕ (ęŕňî \"/\", \"/usr\" čëč \"/var\"), íî ňîâŕ íĺ ĺ\n"
-"çŕäúëćčňĺëíî çŕ ä˙ëîâĺ ńúäúđćŕůč äŕííč, ęîčňî čńęŕňĺ äŕ çŕďŕçčňĺ "
-"(îáčęíîâĺíî\n"
-"\"/home\").\n"
-"\n"
-"Ěîë˙, áúäĺňĺ âíčěŕňĺëíč, ęîăŕňî čçáčđŕňĺ ä˙ëîâĺňĺ. Ńëĺä ôîđěŕňčđŕíĺ âńč÷ęč\n"
-"äŕííč íŕ ďîńî÷ĺíčňĺ ä˙ëîâĺ ůĺ áúäŕň čçňđčňč č í˙ěŕ äŕ ěîćĺňĺ äŕ ăč\n"
-"âúçńňŕíîâčňĺ.\n"
-"\n"
-"Öúęíĺňĺ \"OK\", ęîăŕňî ńňĺ ăîňîâč äŕ ôîđěŕňčđŕňĺ äŕëîâĺ.\n"
-"\n"
-"Öúęíĺňĺ \"Îňęŕç\", ŕęî čńęŕňĺ äŕ čçáĺđĺňĺ äđóăč ä˙ëîâĺ çŕ číńňŕëŕöč˙ íŕ "
-"íîâŕňŕ\n"
-"ńč Mandrake Linux îďĺđŕöčîííŕ ńčńňĺěŕ.\n"
-"\n"
-"Öúęíĺňĺ \"Íŕďđĺäíč÷ŕâ\", ŕęî čńęŕňĺ äŕ čçáĺđĺňĺ ä˙ëîâĺ, ęîčňî äŕ áúäŕň\n"
-"ďđîâĺđĺíč çŕ ëîřč áëîęîâĺ îň äčńęŕ."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Íîâŕňŕ âč Mandrake Linux îďĺđŕöčîííŕ ńčńňĺěŕ â ěîěĺíňŕ ńĺ číńňŕëčđŕ. Ňŕçč\n"
-"îďĺđŕöč˙ áč ňđ˙áâŕëî äŕ îňíĺěĺ í˙ęîëęî ěčíóňč (çŕâčńč îň čçáđŕíŕňŕ ăîëĺěčíŕ "
-"íŕ\n"
-"číńňŕëŕöč˙ňŕ č îň ńęîđîńňňŕ íŕ ęîěďţňúđŕ âč).\n"
-"\n"
-"Ěîë˙, áúäĺňĺ ňúđďĺëčâč."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Ďđĺäč äŕ ďđîäúëćčňĺ, ňđ˙áâŕ âíčěŕňĺëíî äŕ ďđî÷ĺňĺňĺ óńëîâč˙ňŕ íŕ ëčöĺíçŕ. "
-"Ňîé\n"
-"ďîęđčâŕ ö˙ëŕňŕ Mandrake Linux äčńňđčáóöč˙, č, ŕęî íĺ ńňĺ ńúăëŕńíč ń âńč÷ęč "
-"óńëîâč˙\n"
-"â íĺăî, öúęíĺňĺ íŕ áóňîíŕ Îňęŕç. Ňîâŕ íĺçŕáŕâíî ůĺ ďđčęëţ÷č číńňŕëŕöč˙ňŕ. Çŕ "
-"äŕ\n"
-"ďđîäúëćčňĺ ń číńňŕëŕöč˙ňŕ, öúęíĺňĺ íŕ áóňîíŕ Ďđčĺěč."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Â ňîçč ěîěĺíň, ňđ˙áâŕ äŕ čçáĺđĺňĺ íčâîňî íŕ ńčăóđíîńň, ęîĺňî čńęŕňĺ çŕ\n"
-"ěŕřčíŕňŕ. Ďî ďđŕâčëî, ęîëęîňî ďîâĺ÷ĺ ěŕřčíŕňŕ âč ĺ äîńňúďíŕ č ęîëęîňî "
-"ďîâĺ÷ĺ\n"
-"äŕííč ńĺ ńúőđŕí˙âŕň íŕ íĺ˙, ňîëęîâŕ ďî-âčńîęî ňđ˙áâŕ äŕ ĺ íčâîňî íŕ "
-"ńčăóđíîńň.\n"
-"Âúďđĺęč ňîâŕ, âčńîęŕňŕ ńčăóđíîńň ĺ çŕ ńěĺňęŕ íŕ ëĺęîňŕňŕ íŕ đŕáîňŕ.\n"
-"Îáúđíĺňĺ ńĺ ęúě ăëŕâŕňŕ MSEC íŕ Reference Manual, çŕ äŕ ďîëó÷čňĺ ďîâĺ÷ĺ "
-"číôîđěŕöč˙\n"
-"çŕ çíŕ÷ĺíčĺňî íŕ ňĺçč íčâŕ.\n"
-"\n"
-"Ŕęî íĺ çíŕĺňĺ ęŕęňî äŕ čçáĺđĺňĺ, čçáĺđĺňĺ îďöč˙ňŕ ďî ďîäđŕçáčđŕíĺ."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Â ňîçč ěîěĺíň ňđ˙áâŕ äŕ čçáĺđĺňĺ ęîé ä˙ëîâĺ äŕ áúäŕň čçďîëçâŕíč çŕ "
-"číńňŕëŕöč˙\n"
-"íŕ âŕřŕňŕ Mandrake Linux ńčńňĺěŕ. Ŕęî ä˙ëîâĺňĺ âĺ÷ĺ ńŕ îďđĺäĺëĺíč, äŕëč îň\n"
-"ďđĺäčříŕ číńňŕëŕöč˙ íŕ GNU/Linux čëč îň äđóă číńňđóěĺíň çŕ đŕçäĺë˙íĺ, "
-"ěîćĺňĺ\n"
-"äŕ čçďîëçâŕňĺ ńúůĺńňâóâŕůčňĺ äŕëîâĺ.  ďđîňčâĺí ńëó÷ŕé ňđ˙áâŕ äŕ îďđĺäĺëčňĺ\n"
-"ä˙ëîâĺ îň ňâúđäč˙ äčńę.\n"
-"\n"
-"Çŕ äŕ ńúçäŕäĺňĺ ä˙ëîâĺ, ňđ˙áâŕ ďúđâî äŕ čçáĺđĺňĺ ňâúđä äčńę. Ěîćĺňĺ äŕ\n"
-"čçáĺđĺňĺ äčńę çŕ đŕçäĺë˙íĺ, ęŕňî öúęíĺňĺ íŕ \"hda\" çŕ ďúđâî IDE "
-"óńňđîéńňâî,\n"
-"\"hdb\" çŕ âňîđîňî, \"sda\" çŕ ďúđâî SCSI óńňđîéńňâî č ň.í..\n"
-"\n"
-"Çŕ äŕ đŕçäĺëčňĺ čçáđŕíč˙ ňâúđ äčńę, ěîćĺňĺ äŕ čçďîëçâŕňĺ ńëĺäíč˙ îďöčč:\n"
-"\n"
-" * \"Čç÷čńňč âńč÷ęî\": ňŕçč îďöč˙ čçňđčâŕ âńč÷ęč ä˙ëîâĺ íŕ čçáđŕíč˙ äčńę.\n"
-"\n"
-" * \"Ŕâňîěŕňč÷íî ńúçäŕâŕíĺ\": ňŕçč îďöč˙ ďîçâîë˙âŕ ŕâňîěŕňč÷íî äŕ ńúçŕäĺňĺ\n"
-"Ext2 č swap ä˙ëîâĺ â ńâîáîäíîňî ďđîńňđŕíńňâî íŕ ňâúđäč˙ âč äčńę.\n"
-"\n"
-" * \"Ńďŕńč ňŕáëčöŕňŕ ń ä˙ëîâĺ\": ŕęî ňŕáëčöŕňŕ ń ä˙ëîâĺ ĺ ďîâđĺäĺíŕ, ěîćĺňĺ\n"
-"äŕ ńĺ îďčňŕňĺ äŕ ˙ âúçńňŕíîâčňĺ ń ňŕçč îďöč˙. Ěîë˙, áúäĺňĺ âíčěŕňĺëíč č\n"
-"ďîěíĺňĺ, ÷ĺ ěîćĺ äŕ íĺ ńňŕíĺ.\n"
-"\n"
-" * \"Âúđíč\": čçďîëçâŕéňĺ ňŕçč îďöč˙, çŕ äŕ îňěĺíčňĺ ďđîěĺíčňĺ.\n"
-"\n"
-" * \"Ďđĺçŕđĺäč\": ěîćĺňĺ äŕ čçďîëçâŕňĺ ňŕçč îďöč˙, ŕęî čńęŕňĺ äŕ âúđíĺňĺ\n"
-"âńč÷ęč ďđîěĺíč č äŕ çŕđĺäčňĺ ďúđâîíŕ÷ŕëíŕňŕ ňŕáëčöŕ ń ä˙ëîâĺ.\n"
-"\n"
-" * \"Ěŕăüîńíčę\": čçďîëçâŕéňĺ ňŕçč îďöč˙, ŕęî čńęŕňĺ äŕ čçďîëçâŕňĺ "
-"ěŕăüîńíčę,\n"
-"äŕ đŕçäĺëč ňâúđäč˙ âč äčńę. Ňîâŕ ńĺ ďđĺďîđú÷âŕ, ŕęî í˙ěŕňĺ äîńňŕňú÷íî "
-"ďîçíŕíč˙\n"
-"çŕ đŕçäĺë˙íĺňî.\n"
-"\n"
-" * \"Âúçńňŕíîâč îň äčńęĺňŕ\": ňŕçč îďöč˙ ůĺ âč ďîçâîëč äŕ âúçńňŕíîâčňĺ "
-"çŕďŕçĺíŕ\n"
-"ďđĺäč ňîâŕ íŕ äčńęĺňŕ ňŕáëčöŕ ń ä˙ëîâĺ.\n"
-"\n"
-" * \"Çŕďŕçč íŕ äčńęĺňŕ\": çŕďŕçâŕ ňŕáëčöŕňŕ ń ä˙ëîâĺ íŕ äčńęĺňŕ. Ďîëĺçíî ĺ "
-"ďđč\n"
-"ĺâĺíňóŕëíî âúçńňŕíîâ˙âŕíĺ íŕ ňŕáëčöŕňŕ ďđč íĺîáőîäčěîńň. Ńčëíî ńĺ "
-"ďđĺďîđú÷âŕ\n"
-"äŕ íŕďđŕâčňĺ ňîâŕ.\n"
-"\n"
-" * \"Ăîňîâî\": ęîăŕňî ńňĺ ńâúđřčëč ń đŕçäĺë˙íĺňî íŕ ňâúđäč˙ ńč äčńę, ňîâŕ "
-"ůĺ\n"
-"çŕďčřĺ ďđîěĺíčňĺ âúđőó äčńęŕ.\n"
-"\n"
-"Çŕáĺëĺćĺňŕ: ěîćĺňĺ äŕ äîńňčăíĺňĺ âń˙ęŕ îďöč˙ čçďîëçâŕéęč ęëŕâčŕňóđŕňŕ.\n"
-"Ěčíŕâŕéňĺ ďđĺç ä˙ëîâĺňĺ čçďîëçâŕéęč [Tab} č ńňđĺëęčňĺ íŕăîđĺ/íŕäîëó.\n"
-"\n"
-"Ęîăŕňî ĺ čçáđŕí ä˙ë, ěîćĺňĺ äŕ čçďîëçâŕňĺ:\n"
-"\n"
-" * Ctrl-c, çŕ äŕ ńúçäŕäĺňĺ íîâ ä˙ë (ŕęî ĺ čçáđŕí ďđŕçĺí ä˙ë);\n"
-"\n"
-" * Ctrl-d, çŕ äŕ čçňđčĺňĺ ä˙ë;\n"
-"\n"
-" * Ctrl-m, çŕ äŕ óńňŕíîâčňĺ ňî÷ęŕ íŕ ěîíňčđŕíĺ.\n"
-"\n"
-"Ŕęî číńňŕëčňĺ íŕ PPC ěŕřčíŕ, ńčăóđíî ůĺ čńęŕňĺ äŕ ńúçäŕäĺňĺ ěŕëúę HFS\n"
-"\"bootstrap\" ä˙ë îň ďîíĺ 1 ĚÁ, ęîéňî ůĺ áúäĺ čçďîëçâŕň îň boot loader-úň\n"
-"yaboot. Ŕęî ńě˙ňŕňĺ äŕ íŕďđŕâčňĺ ä˙ëŕ ďî-ăîë˙ě, íŕďđčěĺđ 50 ĚÁ, ěîćĺňĺ äŕ "
-"ăî\n"
-"íŕěĺđčňĺ çŕ ďîëĺçíî ě˙ńňî, ęúäĺňî äŕ ńúőđŕí˙âŕňĺ í˙ęîĺ ˙äđî čëč image íŕ\n"
-"ramdisk â ńëó÷ŕé íŕ čçâúíđĺäíč ńčňóŕöčč."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Áĺřĺ çŕńĺ÷ĺí ďîâĺ÷ĺ îň ĺäčí Microsoft Windows ä˙ë\n"
-"íŕ ňâúđäč˙ âč äčńęŕ. Čçáĺđĺňĺ ňîçč, ÷č˙ňî äúëćčíŕ čńęŕňĺ äŕ ďđîěĺíčňĺ, çŕ "
-"äŕ\n"
-"číńňŕëčđŕňĺ Mandrake Linux îďĺđŕöčîííŕ ńčńňĺěŕ.\n"
-"\n"
-"\n"
-"Çŕ číôîđěŕöč˙, âńĺęč ä˙ë ĺ čçáđîĺí ęŕęňî ńëĺäâŕ: \"Linux čěĺ\", \"Windows čěĺ"
-"\", \"Ęŕďŕöčňĺň\".\n"
-"\n"
-"\"Linux čěĺňî\" ńĺ ęîäčđŕ ęŕęňî ńëĺäâŕ: \"ňčď íŕ äčńęŕ\", \"íîěĺđ íŕ äčńęŕ"
-"\",\n"
-"\"íîěĺđ íŕ ä˙ë\" (íŕďđčěĺđ, \"hda1\").\n"
-"\n"
-"\n"
-"\"Ňčďúň íŕ äčńęŕ\" ěîćĺ äŕ ĺ \"hd\", ŕęî ĺ IDE ňâúđä äčńę, čëč \"sd\", ŕęî "
-"ĺ\n"
-"SCSI ňâúđä äčńę.\n"
-"\n"
-"\n"
-"\"Íîěĺđúň íŕ äčńęŕ\" âčíŕăč ĺ áóęâŕňŕ ńëĺä \"hd\" čëč \"sd\". Ďđč IDE "
-"äčńęîâĺ:\n"
-"\n"
-" * \"a\" îçíŕ÷ŕâŕ \"master äčńę íŕ ďúđâč˙ IDE ęîíňđîëĺđ\",\n"
-" * \"b\" îçíŕ÷ŕâŕ \"slave äčńę íŕ ďúđâč˙ IDE ęîíňđîëĺđ\",\n"
-" * \"c\" îçíŕ÷ŕâŕ \"master äčńę íŕ âňîđč˙ IDE ęîíňđîëĺđ\",\n"
-" * \"d\" îçíŕ÷ŕâŕ \"slave äčńę íŕ âňîđč˙ IDE ęîíňđîëĺđ\".\n"
-"\n"
-"\n"
-"Ďđč SCSI óńňđîéńňâŕ, \"a\" îçíŕ÷ŕâŕ \"ďúđâč ňâúđä äčńę\", \"b\" îçíŕ÷ŕâŕ "
-"\"âňîđč ňâúđä äčńę\" č ň.í..\n"
-"\n"
-"\"Windows čěĺňî\" ĺ áóęâŕňŕ íŕ ňâúđäč˙ âč äčńę ďîä Windows (ďúđâč˙ň äčńę "
-"čëč\n"
-"ä˙ë ńĺ íŕđč÷ŕ \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Ěîë˙, áúäĺňĺ ňúđďĺëčâč. Ňŕçč îďĺđŕöč˙ ěîćĺ äŕ îňíĺěĺ í˙ęîëęî ěčíóňč."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX ńĺăŕ ňđ˙áâŕ äŕ ďđîâĺäĺ číńňŕëŕöč˙ ďî ďîäđŕçáčđŕíĺ (\"Ďđĺďîđú÷čňĺëíŕ"
-"\")\n"
-"čëč ňŕęŕâŕ, ęúäĺňî čěŕňĺ ďî-ăîë˙ě ęîíňđîë (\"Ĺęńďĺđňíŕ\"). Âčĺ ńúůî ňŕęŕ\n"
-"ěîćĺňĺ äŕ čçáĺđĺňĺ äŕ čçâúđřčňĺ íîâŕ číńňŕëŕöč˙ čëč íŕäăđŕćäŕíĺ íŕ\n"
-"ńúůĺńňâóâŕůŕ Mandrake Linux ńčńňĺěŕ. Öúęŕéęč íŕ \"Číńňŕëčđŕé\" ůĺ çŕňđčĺ\n"
-"íŕďúëíî ńňŕđŕňŕ ńčńňĺěŕ. Čçáĺđĺňĺ \"Íŕäăđŕäč\", ŕęî íŕäăđŕćäŕňĺ čëč\n"
-"ďîďđŕâčňĺ ńúůĺńňâóâŕůŕ ńčńňĺěŕ\n"
-"\n"
-"Ěîë˙, čçáĺđĺňĺ \"Číńňŕëčđŕé\", ŕęî í˙ěŕňĺ číńňŕëčđŕíŕ ďđĺäčříŕ âĺđńč íŕ\n"
-"Mandrake Linux čëč ŕęî čńęŕňĺ äŕ čçáčđŕňĺ ěĺćäó îďĺđŕöčîííč ńčńňĺěč.\n"
-"\n"
-"Ěîë˙, čçáĺđĺňĺ \"Íŕäăđŕäč\", ŕęî čńęŕňĺ äŕ íŕäăđŕäčňĺ čëč ďîďđŕâčňĺ âĺ÷ĺ\n"
-"číńňŕëčđŕíŕ âĺđńč˙ íŕ Mandrake Linux.\n"
-"\n"
-"Â çŕâčńčěîńň îň ďîçíŕíč˙ňŕ âč ďî GNU/Linux, ěîë˙, čçáĺđĺňĺ ĺäčí îň ńëĺäíčňĺ\n"
-"âčäîâĺ číńňŕëŕöč˙/íŕäăđŕćäŕíĺ íŕ âŕřŕňŕ Mandrake Linux îďĺđŕöčîíí ńčńňĺěŕ:\n"
-"\n"
-" * Ďđĺďîđú÷čňĺëíŕ: čçáĺđĺňĺ ňîâŕ, ŕęî íčęîăŕ íĺ ńňĺ čńíňŕëčđŕëč GNU/Linux\n"
-"îďĺđŕöčîííŕ ńčńňĺěŕ. Číńňŕëŕöč˙ňŕ ĺ ěíîăî ëĺńíŕ č ůĺ áúäĺňĺ ďîďčňŕíč ńŕěî\n"
-"í˙ęîëęî âúďđîńŕ.\n"
-"\n"
-" * Ĺęńďĺđňíŕ:ŕęî čěŕňĺ äîáđč ďîçíŕíč˙ ďî GNU/Linux, ěîćĺňĺ äŕ čçáĺđĺňĺ ňîçč\n"
-"číńňŕëŕöčîíĺí ęëŕń. Ĺęńďĺđňíŕňŕ číńňŕëŕöč˙ ůĺ âč ďîçâîëč äŕ čçâúđřčňĺ ěíîăî\n"
-"ďîňđĺáčňĺëńęŕ číńňŕëŕöč˙. Îňăîâîđčňĺ íŕ í˙ęîč âúďđîńč ěîćĺ äŕ ńŕ ňđúäč, ŕęî\n"
-"íĺ ďîçíŕâŕňĺ äîáđĺ GNU/Linux, ňŕęŕ ÷ĺ čçáĺđĺňĺ ňîâŕ, îńâĺí ŕęî íĺ çíŕĺňĺ\n"
-"ęŕęâî ďđŕâčňĺ."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Îáčęíîâĺíî, DrakX áč ňđ˙áâŕëî äŕ čçáĺđĺ ďđŕâčëíŕňŕ çŕ âŕń ęëŕâčŕňóđŕ (â "
-"çŕâčńčěîńň\n"
-"îň ĺçčęŕ, ęîéňî ńňĺ čçáđŕëč) č í˙ěŕ äŕ ńĺ íŕëîćč äŕ âčäčňĺ ňŕçč ńňúďęŕ. "
-"Îáŕ÷ĺ ěîćĺ äŕ\n"
-"í˙ěŕňĺ ęëŕâčŕňóđŕ ńúîňâĺňńňâŕůŕ ňî÷íî íŕ âŕřč˙ ĺçčę: íŕďđčěĺđ, ŕęî ńňĺ "
-"ŕíăëîăîâîđ˙ů řâĺä,\n"
-"ěîćĺ áč ůĺ čńęŕňĺ ęëŕâčŕňóđŕňŕ âč äŕ áúäĺ řâĺäńęŕ. Čëč ŕęî ăîâîđčňĺ "
-"aíăëčéńęč, íî ńňĺ\n"
-"â Ęâĺáĺę, ěîćĺ áč ůĺ ńňĺ â ńúůŕňŕ ńčňóŕöč˙. Č â äâŕňŕ ńëó÷ŕ˙, ůĺ ňđ˙áâŕ äŕ "
-"ńĺ âúđíĺňĺ\n"
-"ęúě ňŕçč číńňŕëŕöčîííŕ ńňúďęŕ č äŕ čçáĺđĺňĺ ďđŕâčëíŕňŕ ęëŕâčŕňóđŕ îň "
-"ńďčńúęŕ.\n"
-"\n"
-"Âńč÷ęî, ęîĺňî ňđ˙áâŕ äŕ íŕďđŕâčňĺ, ĺ äŕ ďîńî÷čňĺ ďđĺäďî÷čňŕíŕňŕ ęëŕâčŕňóđíŕ "
-"íŕđĺäáŕ\n"
-"îň ńďčńúęŕ, ęîéňî ůĺ ńĺ ďî˙âč ďđĺä âŕń.\n"
-"\n"
-"Ŕęî čěŕňĺ ęëŕâčŕňóđŕ îň ĺçčę đŕçëč÷ĺí îň ňîçč čçďîëçâŕí ďî ďîäđŕçáčđŕíĺ, "
-"öúęíĺňĺ\n"
-"íŕ áóňîíŕ \"Íŕďđĺäíč÷ŕâ\". Ůĺ âč áúäĺ ďđĺäîńňŕâĺí ďúëĺí ńďčńúę ń "
-"ďîääúđćŕíčňĺ ęëŕâčŕňóđč."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Ěîë˙, öúęíĺňĺ íŕ ďđĺäďî÷čňŕíč˙ ĺçčę íŕ číńňŕëŕöč˙ č ńčńňĺěíŕ óďîňđĺáŕ.\n"
-"\n"
-"Öúęŕíĺňî íŕ áóňîíŕ \"Íŕďđĺäíč÷ŕâ\" ůĺ âč ďîçâîëč äŕ čçáĺđĺňĺ äđóăč ĺçčöč\n"
-"äŕ áúäŕň číńňŕëčđŕíč íŕ đŕáîňíŕňŕ âč ńňŕíöč˙. Čçáčđŕíĺňî íŕ äđóăč ĺçčöč\n"
-"ůĺ číńňŕëčđŕ ôŕéëîâĺ ńďĺöčâč÷íč çŕ ĺçčöčňĺ çŕ ńčńňĺěíŕ äîęóěĺíňŕöč˙ č\n"
-"ďđčëîćĺíč˙. Íŕďđčěĺđ, ŕęî čěŕňĺ ďîňđĺáčňĺëč îň Čçďŕíč˙ íŕ ěŕřčíŕňŕ ńč,\n"
-"čçáĺđĺňĺ ŕíăëčéńęč ęŕňî ăëŕâĺí ĺçčę â äúđâîâčäíŕňŕ ôîđěŕ č â ńĺęöč˙\n"
-"\"Íŕďđĺäíč÷ŕâ\" öúęíĺňĺ íŕ ńčâŕňŕ çâĺçäŕ ńúîňâĺňńňâŕůŕ íŕ\n"
-"\"Čńďŕíńęč|Čńďŕíč˙\".\n"
-"Îňáĺëĺćĺňĺ, ÷ĺ ěîăŕň äŕ áúäŕň číńňŕëčđŕíč í˙ęîëęî ĺçčęŕ. Âĺäíúć čçáđŕí\n"
-"í˙ęŕęúâ ëîęŕë, öúęíĺňĺ áóňîíŕ \"OK\", çŕ äŕ ďđîäúëćčňĺ."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Ďî ďîäđŕçáčđŕíĺ, DrakX ďđĺäďîëŕăŕ ÷ĺ čěŕňĺ äâóáóňîííŕ ěčřęŕ č ůĺ âęëţ÷č\n"
-"ńčěóëčđŕíĺ íŕ ňđč áóňîíŕ. DrakX ŕâňîěŕňč÷íî đŕçáčđŕ äŕëč ĺ PS/2, ńĺđčéíŕ "
-"čëč\n"
-"USB ěčřęŕ.\n"
-"\n"
-"Ŕęî čńęŕňĺ äŕ îďđĺäĺëčňĺ äđóă ňčď íŕ ěčřęŕňŕ, čçáĺđĺňĺ ďîäőîä˙ů îň ńďčńúęŕ,\n"
-"ęîéňî ůĺ âč áúäĺ ďđĺäńňŕâĺí.\n"
-"\n"
-"Ŕęî čçáĺđĺňĺ ěčřęŕ đŕçëč÷íŕ îň ňŕçč ďî ďîäđŕçáčđŕíĺ, ůĺ âč áúäĺ ďđĺäîńňŕâĺí\n"
-"ĺęđŕí çŕ ďđîáŕ. Čçďîëçâŕéňĺ áóňîíčňĺ č ęîëĺëöĺňî, çŕ äŕ ďđîâĺđčňĺ, ÷ĺ\n"
-"íŕńňđîéęŕňŕ ĺ äîđŕ. Ŕęî ěčřęŕňŕ íĺ đŕáîňč, ęŕęňî ňđ˙áâŕ, íŕňčńíĺňĺ číňĺđâŕë\n"
-"čëč ŃĹ ÂÚĐÍĹŇĹ ęúě \"Îňęŕç\" č čçáĺđĺňĺ ďŕę."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Ěîë˙, čçáĺđĺňĺ âĺđíč˙ ďîđň. Íŕďđčěĺđ, ďîđňúň COM1 ďîä Windows ďîä GNU/Linux\n"
-"ńĺ íŕđč÷ŕ ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (čëč LInux LOader) č Grub ńŕ bootloader-č: ňĺ ěîăŕ äŕ ńňŕđňčđŕň\n"
-"GNU/Linux čëč ęî˙ äŕ ĺ äđóăŕ îďĺđŕöčîííŕ ńčńňĺěŕ ńúůĺńňâóâŕůŕ íŕ ęîěďţňúđŕ "
-"âč.\n"
-"Îáčęíîâĺííî, ňĺçč äđóăč îďĺđŕöčîííč ńčńňĺěŕ ńĺ çŕńč÷ŕň č číńňŕëčđŕň\n"
-"ďđŕâčëíî. Ŕęî ňîâŕ íĺ ńňŕâŕ ďđč âŕń, ěîćĺňĺ äŕ äîáŕâ˙ňĺ çŕďčńč íŕ đúęŕ â\n"
-"ňîçč ĺęđŕí. Ăëĺäŕéňĺ äŕ čçáĺđĺňĺ âĺđíč ďŕđŕěĺňđč.\n"
-"\n"
-"\n"
-"Ěîćĺ äŕ íĺ čńęŕňĺ äŕ äŕâŕňĺ äîńňúď äî ňĺçč îďĺđŕöčîííč ńčńňĺěč íŕ íčęîé,\n"
-"â ęîéňî ńëó÷ŕé ěîćĺňĺ äŕ čçňđčĺňĺ ńúîňâĺňíčňĺ çŕďčńč. Íî â ňŕęúâ ńëó÷ŕé,\n"
-"ůĺ ńĺ íóćäŕĺňĺ îň boot-äčńęĺňŕ, çŕ äŕ ăč ńňŕđňčđŕňĺ !"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Ňđ˙áâŕ äŕ ďîńî÷čňĺ ęúäĺ ćĺëŕĺňĺ äŕ\n"
-"ďîńňŕâčňĺ číôîđěŕöč˙ňŕ, íĺîáőîäčěŕ çŕ ńňŕđňčđŕíĺňî íŕ GNU/Linux.\n"
-"\n"
-"Ŕęî íĺ ńňĺ ńčăóđíč â ňîâŕ, ęîĺňî ďđŕâčňĺ, čçáĺđĺňĺ \"Ďúđâč˙ ńĺęňîđ íŕ\n"
-"óńňđîéńňâîňî (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Čçáĺđĺňĺ ňâúđäč˙ äčńę, ęîéňî čńęŕňĺ äŕ čçňđĺňĺ, çŕ äŕ\n"
-"číńňŕëčđŕě íîâč˙ âč Mandrake Linux ä˙ë. Âíčěŕíčĺ, âńč÷ęč äŕííč íŕ íĺăî ůĺ "
-"áúäŕň çŕăóáĺíč\n"
-"č í˙ěŕ äŕ ěîăŕň äŕ ńĺ âúçńňŕíîâ˙ň."
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Öúęíĺňĺ \"OK\", ŕęî čńęŕňĺ äŕ čçňđčĺňĺ âńč÷ęč äŕííč č\n"
-"ä˙ëîâĺ ńúůĺńňâóâŕůč íŕ ňîçč ňâúđä äčńę. Âíčěŕíčĺ, ńëĺä öúęŕíĺ íŕ \"OK\", "
-"í˙ěŕäŕ ěîćĺňĺ äŕ âúçńňŕíîâčňĺ ęŕęâčňî č äŕ áčëî äŕííč č ä˙ëîâĺ ńúůĺńňâóâŕůč "
-"íŕ ňîçč ňâúđä äčńę,\n"
-"âęëţ÷čňĺëíî ęŕęâčňî č äŕ ĺ Windows äŕííč.\n"
-"\n"
-"Öúęíĺňĺ \"Îňě˙íŕ\", çŕ äŕ îňěĺíčňĺ ňŕçč îďĺđŕöč˙ áĺç çŕăóáŕ äŕ äŕííčňĺ č\n"
-"ä˙ëîâĺňĺ ńúůĺńňâóâŕůč íŕ ňîçč ňâúđä äčńę."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Čçáđŕëč ńňĺ ńëĺäíč˙(ňĺ) ńúđâúđ(č): %s\n"
-"\n"
-"\n"
-"Ňĺçč ńúđâúđč ńĺ ŕęňčâčđŕň ďî ďîäđŕçáčđŕíĺ. Ňĺ í˙ěŕň čçâĺńňíč ďđîáëĺěč ńúń\n"
-"ńčăóđíîńňňŕ, íî ěîćĺ äŕ ńĺ íŕěĺđ˙ň íîâč.  ňîçč ńëó÷ŕé, ůĺ ňđ˙áâŕ äŕ ńňĺ\n"
-"ńčăóđíč, ÷ĺ ůĺ íŕäăđŕćäŕňĺ âúçěîćíî íŕé-áúđçî.\n"
-"\n"
-"\n"
-"Íŕčńňčíŕ ëč čńęŕňĺ äŕ číńňŕëčđŕňĺ ňĺçč ńúđâúđč ?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Íĺ ěîćĺňĺ äŕ čçďîëçâŕňĺ broadcast áĺç NIS äîěĺéí"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ńëîćĺňĺ FAT ôîđěŕňčđŕíŕ äčńęĺňŕ â óńňđîéńňâî %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ňŕçč äčńęĺňŕ íĺ ĺ ôîđěŕňčđŕíŕ íŕ FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Çŕ äŕ čçďîëçâŕňĺ çŕďŕçĺí čçáîđ íŕ ďŕęĺňč, ńňŕđňčđŕéňĺ číńňŕëŕöč˙ňŕ ń ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Ăđĺřęŕ ďđč ÷ĺňĺíĺňî íŕ ôŕéëŕ %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"×ŕńň îň őŕđäóĺđŕ íŕ ęîěďţňúđŕ âč ńĺ íóćäŕĺ îň ``ńîáńňâĺíčňĺ ńč'' äđŕéâĺđč, "
-"çŕ äŕ đŕáîňč.\n"
-"Ěîćĺňĺ äŕ íŕěĺđčňĺ ďîâĺ÷ĺ číôîđěŕöč˙ çŕ ňîâŕ íŕ: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Ňđ˙áâŕ äŕ čěŕňĺ root-ä˙ë.\n"
-"Çŕňîâŕ ńúçäŕéňĺ ä˙ë (čëč öúęíĺňĺ íŕ ńúůĺńňâóâŕů).\n"
-"Ňîăŕâŕ čçáĺđĺňĺ äĺéńňâčĺ ``Ě˙ńňî íŕ ěîíňčđŕíĺ'' č ăî ńëîćĺňĺ `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Ňđ˙áâŕ äŕ čěŕňĺ swap-ä˙ë"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Í˙ěŕňĺ swap-ä˙ë\n"
-"\n"
-"Äŕ ďđîäúëćŕ ëč âńĺ ďŕę ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Ňđ˙áâŕ äŕ čěŕňĺ FAT ä˙ë ěîíňčđŕí â /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Čçďîëçâŕé ńâîáîäíîňî ě˙ńňî"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Í˙ěŕ äîńňŕňú÷íî ě˙ńňî çŕ ńúçäŕâŕíĺ íŕ íîâ ä˙ë"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Čçďîçâŕíĺ íŕ ńúůĺńňâóâŕů ä˙ë"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Í˙ěŕ ä˙ë, ęîéňî ěîăŕ äŕ čçďîëçâŕě"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Čçďîëçâŕé çŕ Windows ä˙ëúň çŕ loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ęîé ä˙ë čńęŕňĺ äŕ čçďîëçâŕňĺ çŕ Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Čçáĺđĺňĺ ăîëĺěčíčňĺ"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Ăîëĺěčíŕ íŕ root-ä˙ëŕ â MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ăîëĺěčíŕ íŕ swap-ä˙ëŕ â MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Čçďîëçâŕé ńâîáîäíîňî ě˙ńňî íŕ Windows ä˙ëŕ"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Ęîé ä˙ë ćĺëŕĺňĺ äŕ ďđîěĺíčňĺ?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Čç÷čńë˙âŕě ăđŕíčöčňĺ íŕ Windows ôŕéëîâŕňŕ ńčńňĺěŕ"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Íĺ âúçěîćíîńň çŕ đŕáîňŕ ń âŕřč˙ FAT ä˙ë, \n"
-"ďîđŕäč ďîëó÷ĺíŕňŕ ăđĺřęŕ: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Âŕřč˙ň Windows ä˙ë ĺ ěíîăî ôđŕăěĺíňčđŕí, ěîë˙ ďúđâî ńňŕđňčđŕéňĺ ''defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÂÍČĚŔÍČĹ!\n"
-"\n"
-"DrakX ňđ˙áâŕ äŕ ďđĺđŕçäĺëč Âŕřč˙ Windows ä˙ë. Áúäĺňĺ âíčěŕňĺëíč: ňŕçč "
-"îďĺđŕöč˙ ĺ\n"
-"îďŕńíŕ. Ŕęî îůĺ íĺ ńňĺ ăî íŕďđŕâčëč, ňđ˙áâŕ ďúđâî äŕ ďóńíĺňĺ scandisk (č\n"
-"ĺâĺíňóŕëíî äŕ čçďîëçâŕňĺ defrag) ďîä Windows âúđőó ňîçč ä˙ë, ňîăŕâŕ \n"
-"ďîâňîđĺňĺ číńňŕëŕöčŕ˙ňŕ. Áč áčëî äîáđĺ äŕ íŕďđŕâčňĺ ŕđőčâ íŕ äŕííčňĺ ńč.\n"
-"Ęîăŕňî ńňĺ ńčăóđíč, íŕňčńíĺňĺ ÎĘ."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Ęîëęî čńęŕňĺ äŕ îńňŕâčňĺ çŕ windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "ä˙ë %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Íĺóńďĺříî ďđĺđŕçäĺë˙íĺ íŕ FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Í˙ěŕ FAT ä˙ëîâĺ çŕ ńě˙íŕ íŕ ăîëĺěčíŕňŕ čëč çŕ čçďîëçâŕíĺ ęŕňî loopback (čëč "
-"í˙ěŕ äîńňŕňú÷íî ě˙ńňî íŕ äčńęŕ)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Čçňđčé öĺëč˙ äčńę"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ďđĺěŕőíč Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "čěŕňĺ ďîâĺ÷ĺ îň ĺäčí ňâúđäč äčńęîâĺ, ęîé äŕ čçďîëçâŕě çŕ číńňŕëŕöč˙ňŕ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ÂŃČ×ĘČ ńúůĺńňâóâŕůč ä˙ëîâĺ č äŕííčňe âúđőó ň˙ő íŕ %s ůĺ áúäŕň çŕăóáĺíč"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Ęëčĺíňńęî đŕçäĺë˙íĺ íŕ äčńęŕ"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Čçďîëçâŕé fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ńĺăŕ ěîćĺňĺ äŕ đŕçäĺëčňĺ %s.\n"
-"Ęîăŕňî ńňĺ ăîňîâč, íĺ çŕáđŕâ˙éňĺ äŕ çŕďčřĺňĺ čçďîëçâŕéęč `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Í˙ěŕ äîńňŕňú÷íî ńâîáîäíî ě˙ńňî íŕ ä˙ëŕ"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Íĺ ěîăŕ äŕ íŕěĺđ˙ íčęŕęâî ě˙ńňî çŕ číńňŕëŕöč˙"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ďîěîůíčęúň çŕ đŕçäĺëčíĺ íŕ ä˙ëîâĺ íŕ DrakX íŕěĺđč ńëĺäíčňĺ đĺřĺíč˙:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Íĺóńďĺříî đŕçäĺë˙íĺ íŕ: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Âęëţ÷âŕě ěđĺćŕňŕ"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Čçęëţ÷âŕíĺ íŕ ěđĺćŕňŕ"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ďî˙âč ńĺ ăđĺřęŕ, íî íĺ çíŕě ęŕę äŕ ńĺ ńďđŕâ˙ ń íĺ˙ äĺëčęŕňíî.\n"
-"Ěîćĺňĺ äŕ ďđîäúëćčňĺ íŕ ńâîé đčńę."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äóáëčđŕé ňî÷ęŕňŕ íŕ ěîíňčđŕíĺ %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Í˙ęîč âŕćíč ďŕęĺňč íĺ ńĺ číńňŕëčđŕőŕ ęŕęňî ňđ˙áâŕ.\n"
-"Čëč CDROM óńňđîéńňâîňî âč čëč ęîěďŕęň äčńęŕ âč ĺ äĺôĺęňĺí.\n"
-"Ďđîâĺđĺňĺ ęîěďŕęň äčńęŕ íŕ číńňŕëčđŕíč˙ ęîěďţňúđ čçďîëçâŕéęč \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Äîáđĺ äîřëč â %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Í˙ěŕ ôëîďč óńňđîéńňâî"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Íŕâëčçŕě â ĺňŕď `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Âŕřŕňŕ ńčńňĺěŕ ĺ ń ěŕëęč đĺńóđńč. Ěîćĺ äŕ čěŕňĺ ďđîáëĺěč ń číńňŕëčđŕíĺňî\n"
-"íŕ Mandrake Linux. Ŕęî ńĺ ďî˙âč ďđîáëĺě îďčňŕéňĺ ń ňĺęńňîâŕňŕ číńŕëŕöč˙. "
-"Çŕöĺëňŕ,\n"
-"íŕňčńíĺňĺ 'F1', ęîăŕňî ńňŕđňčđŕňĺ îň CDROM č âúâĺäĺňĺ 'ňĺüň'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Ęëŕń číńňŕëŕöč˙"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Ěîë˙, čçáĺđĺňĺ ĺäčí îň ńëĺäíčňĺ ęëŕńîâĺ íŕ číńňŕëŕöč˙:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Îáůŕňŕ ăîëĺěčíŕ íŕ ăđóďčňĺ, ęîčňî ńňĺ ěŕđęčđŕëč, ĺ îęîëî %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ŕęî čńęŕňĺ äŕ číńňŕëčđŕňĺ ďî-ěŕëęî îň ňŕçč ăîëĺěčíŕ,\n"
-"čçáĺđĺňĺ ďđîöĺíň ďŕęĺňč, ęîčňî čńęŕňĺ äŕ číńňŕëčđŕňĺ.\n"
-"\n"
-"Ďđč íčńúę ďđîöĺíň ůĺ ńĺ číńňŕëčđŕň ńŕěî íŕé-âŕćíčňĺ ďŕęĺňč;\n"
-"ďđč 100%% ůĺ číńňŕëčđŕň âńč÷ęč ěŕđęčđŕíč ďŕęĺňč."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Čěŕňĺ ě˙ńňî íŕ äčńęŕ ńč ńŕěî çŕ %d%% îň ňĺçč ďŕęĺňč.\n"
-"\n"
-"Ŕęî čńęŕňĺ äŕ číńňŕëčđŕňĺ ďî-ěŕëęî îň ňîâŕ,\n"
-"čçáĺđĺňĺ ďđîöĺíň îň ďŕęĺňčňĺ, ęîčňî číńęŕňĺ äŕ číńňŕëčđŕňĺ.\n"
-"Ďđč íčńúę ďđîöĺíň ůĺ ńĺ číńňŕëčđŕň ńŕěî íŕé-âŕćíčňĺ ďŕęĺňč;\n"
-"ďđč %d%% ůĺ číńňŕëčđŕň âńč÷ęč čçáđŕíč ďŕęĺňč."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Ůĺ čěŕňĺ âúçěîćíîńňňŕ äŕ čçáĺđĺňĺ ďî-ňî÷íî ďđč ńëĺäâŕůč˙ ĺňŕď."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Ďđîöĺíň ďŕęĺňč çŕ číńňŕëčđŕíĺ"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Čçáîđ íŕ ăđóďŕ ďŕęĺňč"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Čçáčđŕíĺ íŕ ďŕęĺňč ĺäčí ďî ĺäčí"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Îáůŕ ăîëĺěčíŕ: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Ëîř ďŕęĺň"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Čěĺ: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Âĺđńč˙: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ăîëĺěčíŕ: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Âŕćíîńň: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Íĺ ěîćĺňĺ äŕ îńňŕâčňĺ ďŕęĺňŕ íĺěŕđęčđŕí, çŕůîňî í˙ěŕňĺ ě˙ńňî äŕ ăî "
-"číńňŕëčđŕňĺ"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ńëĺäíčňĺ ďŕęĺňč ůĺ áúäŕň číńňŕëčđŕíč"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ńëĺäíčňĺ ďŕęĺňč ůĺ áúäŕň ďđĺěŕőíŕňč"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Íĺ ěîćĺňĺ äŕ îňáĺëĺćĺňĺ/äĺîňáĺëĺćĺňĺ ňîçč ďŕęĺň"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ňîâŕ ĺ íóćĺí ďŕęĺň, íĺ ěîćĺ äŕ áúäĺ íĺěŕđęčđŕí"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Íĺ ěîćĺňĺ äŕ îńňŕâčňĺ ňîçč ďŕęĺň íĺěŕđęčđŕí. Ňîé âĺ÷ĺ ĺ číńňŕëčđŕí"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ňîçč ďŕęĺň ňđ˙áâŕ äŕ áúäĺ îáíîâĺí\n"
-"Ńčăóđíč ëč ńňĺ, ÷ĺ čńęŕňĺ äŕ ăî čçęëţ÷čňĺ ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Íĺ ěîćĺňĺ äŕ čçęëţ÷čňĺ ňîçč ďŕęĺň. Ňîé ňđ˙áâŕ äŕ áúäĺ îáíîâĺí"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Ďîęŕćč ŕâňîěŕňč÷íî îňáĺë˙çŕíčňĺ ďŕęĺňč"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Číńňŕëčđŕé"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Çŕđĺäč/Çŕďŕçč íŕ äčńęĺňŕ"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Îáíîâ˙âŕíĺ íŕ čçáîđŕ íŕ ďŕęĺňč"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Ěčěčíŕëíŕ číńňŕëŕöč˙"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Čçáĺđĺňĺ ďŕęĺňčňĺ, ęîčňî čńęŕňĺ äŕ číńňŕëčđŕňĺ"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Číńňŕëčđŕě"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Ďđĺńě˙ňŕíĺ"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Îńňŕâŕůî âđĺěĺ "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Ěîë˙, čç÷ŕęŕéňĺ, ďîäăîňâ˙íĺ íŕ číńňŕëŕöč˙ňŕ"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d ďŕęĺňŕ"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Číńňŕëčđŕíĺ íŕ ďŕęĺňŕ %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Ďđčĺěč"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Îňęŕćč"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ńěĺíĺňĺ CD-ROM !\n"
-"\n"
-"Ěîë˙, ńëîćĺňĺ CD-ROM îçŕăëŕâĺí \"%s\" â óńňđîéńňâîňî č íŕňčńíĺňĺ Ok, ęîăŕňî "
-"ńňĺ ăîňîâč.\n"
-"Ŕęî ăî í˙ěŕňĺ, íŕňčńíĺňĺ Îňě˙íŕ, çŕ äŕ čçáĺăíĺňĺ číńňŕëčđŕíĺňî îň ňîçč CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Äŕ ďđîäúëćŕ ëč âńĺ ďŕę ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Ďî˙âč ńĺ ăđĺřęŕ ďđč ďîđú÷âŕíĺňî íŕ ďŕęĺňčňĺ:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Ďî˙âč ńĺ ăđĺřęŕ ďđč číńňŕëčđŕíĺ íŕ ďŕęĺňčňĺ:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Âíčěŕíčĺ\n"
-"\n"
-"Ěîë˙, ďđî÷ĺňĺňĺ óńëîâč˙ňŕ ďî-äîëó. Ŕęî íĺ ńňĺ ńúăëŕńíč ń í˙ęîĺ îň ň˙ő,\n"
-"íĺ ěîćĺňĺ äŕ ďđîäúëćčňĺ číńňŕëŕöč˙ňŕ íŕ ńëĺäâŕůč˙ CD íîńčňĺë. Íŕňčńíĺňĺ\n"
-"'Îňęŕćč', çŕ äŕ ďđîäúëćčňĺ číńňŕëŕöč˙ňŕ áĺç ňĺçč íîńčňĺëč.\n"
-"\n"
-"\n"
-"Í˙ęîč ęîěďîíĺíňč ńúäúđćŕůč ńĺ â ńëĺäâŕůč˙ CD íîńčňĺë íĺ ńŕ đŕçďđîńňđŕí˙âŕň\n"
-"ďîä GPL Ëčöĺíçŕ čëč ďîäîáĺí ňŕęúâ. Âńĺęč ňŕęúâ ęîěďîíĺíň ĺ ďîä óńëîâč˙ňŕ\n"
-"č ďîëîćĺíč˙ňŕ íŕ ńďĺöčôč÷íč˙ ěó ëčöĺíç. Ěîë˙, ďđî÷ĺňĺňĺ âíčěŕňĺëíî č čçö˙ëî\n"
-"ňĺçč ńďĺöčôč÷íč ëčöĺíçč ďđĺäč äŕ čçďîëçâŕňĺ čëč đŕçďđîńňđŕí˙âŕňĺ "
-"ńďîěĺíŕňčňĺ\n"
-"ęîěďîíĺíňč.\n"
-"Ňŕęčâŕ ëčöĺíçč ďî ďđčíöčď ďđĺäîňâđŕň˙âŕ ďđĺíîńŕ, ęîďčđŕíĺňî (îńâĺí ń öĺë\n"
-"ńúőđŕíĺíčĺ), đŕçďđîńňđŕí˙âŕíĺňî, îáđŕňíč˙ číćĺíĺđčíă, äĺŕńĺěáëčđŕíĺňî\n"
-"äĺęîěďčëŕöč˙ňŕ čëč ěîäčôčęŕöč˙ňŕ íŕ ęîěďîíĺíňčňĺ.\n"
-"Âń˙ęî íŕđóřŕâŕíĺ íŕ ńďîăîäáŕňŕ íĺçŕáŕâíî ďđĺóńňŕíîâ˙âŕ ďđŕâŕňŕ âč ďî\n"
-"ńďĺöčôč÷íč˙ ëčöĺíç. Îńâĺí ŕęî ńďĺöčôč÷íč˙ ëčöĺíç âč äŕâŕ ňŕęčâŕ ďđŕâŕ,\n"
-"îáčęíîâĺíî íĺ ěîćĺňĺ äŕ číńňŕëčđŕňĺ ďđîăđŕěčňĺ íŕ ďîâĺ÷ĺ îň ĺäíŕ ńčńňĺěŕ\n"
-"čëč äŕ ăč ďđčăŕćäŕňĺ çŕ čçďîëçâŕíĺ â ěđĺćŕ. Ŕęî íĺ ńňĺ ńčăóđíč, ěîë˙\n"
-"ńâúđćĺňĺ ńĺ ń äčńňđčáóöč˙ čëč đĺäŕęňîđŕ íŕ ęîěďîíĺíŕ.\n"
-"Ďđĺőâúđë˙íĺňî íŕ ňđĺňč ëčöŕ čëč ęîďčđŕíĺňî íŕ âń˙ęŕ ęîěďîíĺíňŕ, âęëţ÷čňĺëíî\n"
-"íŕ äîęóěĺíňŕöč˙ňŕ, îáčęíîâĺíî ńŕ çŕáđŕíĺíč.\n"
-"\n"
-"\n"
-"Âńč÷ęč ďđŕâŕ íŕ ęîěďîíĺíňčňĺ îň ńëĺäâŕůč˙ CD íîńčňĺë ďđčíŕäëĺćŕň íŕ\n"
-"ńúîňâĺňíčňĺ čě ŕâňîđč č ńŕ çŕůčňĺíč ęŕňî číňĺëĺęňóŕëíŕ ńîáńňâĺíîńň îň\n"
-"çŕęîíčňĺ çŕ ŕâňîđńęč ďđŕâŕ ďđčëîćčěč çŕ ńîôňóĺđíčňĺ ďđîăđŕěč.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ďî˙âč ńĺ ăđĺřęŕ"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Íŕčńňčíŕ ëč čńęŕňĺ äŕ ďđĺěŕőíĺňĺ ďđčíňĺđŕ \"%s\" ?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Ëčöĺíçčîíĺí äîăîâîđ"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Âúâĺäĺňíčĺ\n"
-"\n"
-"Îďĺđŕöčîííŕňŕ ńčńňĺěŕ č đŕçëč÷íčňĺ ęîěďîíĺíňč äîńňúďíč â Mandrake Linux "
-"äčńňđčáóöč˙ňŕ ďî-äîëó ůĺ ńĺ\n"
-"íŕđč÷ŕň \"Ńîôňóĺđĺí Ďđîäóęňč\". Ńîôňóĺđíčňĺ Ďđîäóęňč âęëţ÷âŕň, íî íĺ ńĺ "
-"îăđŕíč÷ŕâŕň ńŕěî äî, íŕáîđŕ\n"
-"ďđîăđŕěč, ěĺňîäč, ďđŕâčëŕ č äîęóěĺíňŕöč˙ îňíŕń˙ůŕ ńĺ äî îďĺđŕöčîííŕňŕ "
-"ńčńňĺěŕ č đŕçëč÷íčňĺ\n"
-"ęîěďîíĺíňč íŕ Mandrake Linux äčńňđčáóöč˙ňŕ.\n"
-"\n"
-"\n"
-"1. Ëčöĺíçčîíĺí äîăîâîđ\n"
-"\n"
-"Ěîë˙, ďđî÷ĺňĺňĺ âíčěŕňĺëíî ňîçč äîęóěĺíň. Ňîçč äîęóěĺíň ĺ ëčöĺíçčîíĺí "
-"äîăîâîđ ěĺćäó âŕń č\n"
-"MandrakeSoft S.A., ęîéňî ńĺ îňíŕń˙ äî Ńîôňóĺđíč˙ Ďđîäóęň. ×đĺç "
-"číńňŕëčđŕíĺňî, ęîďčđŕíĺňî\n"
-"čëč čçďîëçâŕíĺňî íŕ Ńîôňóĺđíč˙ Ďđîäóęň ďî ęŕęúâňî č äŕ ĺ íŕ÷čí âčĺ čçđč÷íî "
-"ďđčĺěŕňĺ č\n"
-"íŕďúëíî ńĺ ńúăëŕń˙âŕňĺ äŕ ńďŕçâŕňĺ ńđîęîâĺňĺ č óńëîâč˙ňŕ íŕ ňîçč Ëčöĺíç.\n"
-"Ŕęî íĺ ńĺ ńúăëŕń˙âŕňĺ ń í˙ęî˙ ÷ŕńň íŕ Ëčöĺíçŕ, í˙ěŕňĺ ďđŕâî äŕ číńňŕëčđŕňĺ, "
-"ęîďčđŕňĺ čëč\n"
-"čçďîëçâŕňĺ Ńîôňóĺđíč˙ Ďđîäóęň. Îďčňčňĺ äŕ ńĺ číńňŕëčđŕ, ęîďčđŕ čëč čçďîëçâŕ "
-"Ńîôňóĺđíč˙ Ďđîäóęň\n"
-"íĺńúîáđŕçíî ńúń ńđîęîâĺňĺ č óńëîâč˙ňŕ íŕ ňîçč Ëčöĺíç ńĺ çŕáđŕí˙âŕň č ňŕęčâŕ "
-"ďđĺęđŕň˙âŕň ďđŕâŕňŕ\n"
-"âč ďî ňîçč Ëčöĺíç. Ďđč ďđĺęđŕň˙âŕíĺ íŕ Ëčöĺíçŕ, ňđ˙áâŕ íĺçŕáŕâíî äŕ "
-"óíčćňîćčňĺ âńč÷ęč\n"
-"ęîďč˙ íŕ Ńîôňóĺđíč˙ ëčöĺíç.\n"
-"\n"
-"\n"
-"2. Îăđŕíč÷ĺíŕ ăŕđŕíöč˙\n"
-"\n"
-"Ńîôňóĺđíčňĺ Ďđîäóęňč č ďđčëîćĺíŕňŕ äîęóěĺíňŕöč˙ ńĺ ďđĺäîńňŕâ˙ňŕ \"ňŕęčâŕ "
-"ęŕęâčňî ńŕ\", áĺç ăŕđŕíöč˙,\n"
-"â đŕěęčňĺ íŕ đŕçđĺřĺíîňî îň çŕęîíŕ.\n"
-"MandrakeSoft S.A., ďđč íčęŕęâč îáńňî˙ňĺëńňâŕ č â đŕěęčňĺ íŕ çŕęîíŕ, íĺ ĺ "
-"îňăîâîđíŕ çŕ ęŕęâčňî äŕ e\n"
-"óěčřëĺíč, ńëó÷ŕéíč, ďđĺęč čëč ęîńňâĺíč ůĺňč (âęëţ÷čňĺëíî çŕăóáŕ íŕ äŕííč çŕ "
-"đŕáîňŕ, ďđĺęđŕň˙âŕíĺ íŕ,\n"
-"đŕáîňŕ, ôčíŕíńîâč çŕăóáč, çŕęîííč äŕíúöč č íŕęŕçŕíč˙ â đĺçóëňŕň íŕ ńúäĺáíî "
-"đĺřĺíčĺ čëč ęŕęâŕňî č äŕ ĺ\n"
-"äđóăŕ ďđîčçëčçŕůč îň ňîâŕ çŕăóáč) ďđîčçňč÷ŕůč îň óďîňđĺáŕňŕ čëč îň "
-"íĺâúçěîćíîńňňŕ äŕ ńĺ óďîňđĺáč\n"
-"Ńîôňóĺđíč˙ Ďđîäóęň, äŕćĺ ŕęî MandrakeSoft S.A. äŕ ĺ čçâĺńňčëŕ çŕ "
-"âúçěîćíîńňňŕ čëč ńëó÷âŕíĺňî íŕ ňŕęŕâŕ çŕăóáŕ.\n"
-"\n"
-"ÎĂĐŔÍČ×ĹÍŔ ÎŇĂÎÂÎĐÍÎŃŇ ŃÂÚĐÇŔÍŔ Ń ĎĐČŇĹĆŔÂŔÍĹŇÎ ČËČ ČÇĎÎËÇÂŔÍĹŇÎ ÍŔ ÇŔÁĐŔÍĹÍ "
-"ŃÎÔŇÓĹĐ Â ÍßĘÎČ ŃŇĐŔÍČ\n"
-"\n"
-"Â đŕěęčňĺ íŕ çŕęîíŕ, MandrakeSoft S.A. č íĺéíčňĺ äčńňđčáóňîđč í˙ěŕ ďđč "
-"íčęŕęâč óńëîâč˙ äŕ áúäŕň\n"
-"îňăîâîđíč çŕ ęŕęâčňî č äŕ áčëî óěčřëĺíč, ńëó÷ŕéíč, ďđĺęč čëč ęîńâĺíč ůĺňč "
-"(âęëţ÷čňĺëíî çŕăóáŕ íŕ äŕííč\n"
-"çŕ đŕáîňŕ, ďđĺęđŕň˙âŕíĺ íŕ, đŕáîňŕ, ôčíŕíńîâč çŕăóáč, çŕęîííč äŕíúöč č "
-"íŕęŕçŕíč˙ â đĺçóëňŕň íŕ\n"
-"ńúäĺáíî đĺřĺíčĺ čëč ęŕęâŕňî č äŕ ĺ äđóăŕ ďđîčçëčçŕůč îň ňîâŕ çŕăóáč) "
-"ďđîčçňč÷ŕůč îň ďđčňĺćŕâŕíĺňî\n"
-"č óďîňđĺáŕňŕ íŕ ńîôňóĺđíč ęîěďîíĺíňč č îň čçňĺăë˙íĺňî íŕ ńîôňóĺđíč "
-"ęîěďîíĺíňč îň ńŕéňîâĺňĺ íŕ Mandrake Linux,\n"
-"ęîčňî ńŕ çŕáđŕíĺíč â í˙ęîč ńňđŕíč îň ěĺńňíîňî çŕęîíîäŕňĺëńňâî.\n"
-"Ňŕçč îăđŕíč÷ĺíŕ îňăîâîđíîńň ńĺ îňíŕń˙ äî, íî íĺ ńŕěî çŕ, ěîůíčňĺ "
-"ęđčďňîăđŕôńęč ęîěďîíĺíňč âęëţ÷ĺíč\n"
-"â Ńîôňóĺđíč˙ Ďđîäóęň.\n"
-"\n"
-"\n"
-"3. GPL Ëčöĺíçŕ č ďđčäđóćŕâŕůč ëčöĺíçč\n"
-"\n"
-"Ńîôňóĺđíč˙ň Ďđîäóęň ńĺ ńúńňîč îň ęîěďîíĺíňč ńúçäŕäĺíč îň đŕçëč÷íč őîđŕ čëč "
-"îđăŕíčçŕöčč. Ďîâĺ÷ĺňî îň\n"
-"ňĺçč ęîěďîíĺíňč ńĺ óďđŕâë˙âŕň îň ńđîęîâĺňĺ č óńëîâč˙ňŕ íŕ GNU Îáůč˙ Ďóáëč÷ĺí "
-"Ëčöĺíç, îňňóę íŕňŕňúę íŕđč÷ŕí\n"
-"\"GPL\", čëč ďîäîáíč íĺěó ëčöĺíçč. Ďîâĺ÷ĺňî îň ňĺçč ëčöĺíçč âč ďîçâîë˙âŕň äŕ "
-"čçďîëçâŕňĺ, ęîďčđŕňĺ, čëč\n"
-"đĺäčńňđčáóňčđŕňĺ ęîěďîíĺíňčňĺ, ęîčňî ňĺ ďîęđčâŕň. Ěîë˙, ďđî÷ĺňĺňĺ âíčěŕňĺëíî "
-"ńđîęîâĺňĺ č óńëîâč˙ňŕ íŕ\n"
-"ëčöĺíçčîííč˙ äîăîâîđ íŕ âńĺęč ęîěďîíĺíň ďđĺäč äŕ ăî čçďîëçâŕňĺ. Âń˙ęŕęâč "
-"âúďđîńč îňíîńíî ëčöĺíçŕ\n"
-"íŕ ęîěďîíĺíňčňĺ áč ňđ˙áâŕëî äŕ áúäŕň íŕńî÷ĺíč ęúě ńúîňâĺňíč˙ čě ŕâňîđ, ŕ íĺ "
-"ęúě MandrakeSoft.\n"
-"Ďđîăđŕěčňĺ đŕçđŕáîňĺíč îň MandrakeSoft S.A. ńĺ óďđŕâë˙âŕň îň GPL Ëčöĺíçŕ. "
-"Äîęóěĺíňŕöč˙ňŕ íŕďčńŕíŕ\n"
-"îň MandrakeSoft S.A. ńĺ óďđŕâë˙âŕ îň ńďĺöčŕëĺí ëčöĺíç. Ěîë˙, ďîăëĺäíĺňĺ "
-"äîęóěĺíňŕöč˙ňŕ çŕ\n"
-"ďîâĺ÷ĺ číôîđěŕöč˙.\n"
-"\n"
-"\n"
-"4. Ďđŕâŕ çŕ Číňĺëĺęňóŕëíŕ Ńîáńňâĺíîńň\n"
-"\n"
-"Âńč÷ęč ďđŕâŕ ęúě ęîěďîíĺíňčňĺ íŕ Ńîôňóĺđíč˙ Ďđîäóęň ďđčíŕäëĺćŕň íŕ "
-"ńúîňâĺňíčňĺ čě ŕâňîđč č ńŕ\n"
-"çŕůčňĺíč îň çŕęîíčňĺ çŕ číňĺëĺęňóŕëíŕňŕ ńîáńňâĺíîńň č çŕ ęîďčđŕíĺ ďđčëŕăŕíč "
-"çŕ ńîôňóĺđíčňĺ ďđîăđŕěč.\n"
-"MandrakeSoft S.A. çŕďŕçâŕ ďđŕâîňî ńč äŕ ěîäčôčöčđŕ č ďđčăîä˙âŕ Ńîôňóĺđíč˙ "
-"Ďđîäóęň, ęŕňî ö˙ëî čëč íŕ\n"
-"÷ŕńňč, ďî âń˙ęŕęúâ íŕ÷čě î ń âń˙ęŕęâč öĺëč.\n"
-"\"Mandrake\", \"Mandrake Linux\" č ńâúđçŕíčňĺ ëîăîňŕ ńŕ çŕďŕçĺíŕ ěŕđęŕ íŕ "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Óďđŕâë˙âŕůč Çŕęîíč\n"
-"\n"
-"Ŕęî í˙ęî˙ ÷ŕńň îň ňîçč äîăîâîđ ńĺ âîäč çŕáđŕíĺíŕ, íĺëĺăŕëíŕ čëč íĺďđčëîćčěŕ "
-"ńďîđĺä đĺřĺíčĺ íŕ ńúä,\n"
-"ňŕçč ÷ŕńň ńĺ čçęëţ÷âŕ îň äîăîâîđŕ. Âčĺ îńňŕâŕňĺ îăđŕíč÷ĺíč îň îńňŕíŕëčňĺ "
-"ďđčëîćčěč ńĺęöčč íŕ äîăîâîđŕ.\n"
-"Ńđîęîâĺňĺ č óńëîâč˙ňŕ íŕ ňîçč Ëčöĺíç ńĺ óďđŕâë˙âŕň îň Çŕęîíčňĺ íŕ Ôđŕíöč˙.\n"
-"Âńč÷ęč ńďîđîâĺ ďî óńëîâč˙ňŕ íŕ ňîçč ëčöĺç áč áčëî äîáđĺ äŕ ńĺ îňíĺńŕň äî "
-"ńúäŕ. Ęŕňî ęđŕéíŕ ě˙đęŕ,\n"
-"ńďîđîâĺňĺ ůĺ áúäŕň îňíŕń˙íč äî ďîäőîä˙ůč˙ ďđŕâíč ńúäčëčůŕ íŕ Ďŕđčć - "
-"Ôđŕíöč˙.\n"
-"Çŕ âń˙ęŕęâč âúďđîńč ďî ňîçč äîęóěĺíň, ěîë˙, ńâúđćĺňĺ ńĺ ń MandrakeSoft S.A.\n"
-"\n"
-"ÇŔÁĹËĹĆĘŔ: Ňîâŕ ĺ áúëăŕđńęč ďđčáëčçčňĺëĺí ďđĺâîä íŕ äîęóěĺíňŕ, ęîĺňî "
-"îçíŕ÷ŕâŕ, ÷ĺ ňîé\n"
-"âĺđî˙ňíî íĺ ĺ äîńňŕňú÷íî ňî÷ĺí. Ęŕňî ďî-äîńňîâĺđĺí čçňî÷íčę ďîëçâŕéňĺ "
-"íĺăîâč˙ îđčăčíŕë íŕ\n"
-"ŕíăëčéńęč.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Ęëŕâčŕňóđŕ"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Ěîë˙, čçáĺđĺňĺ ďîäđĺćäŕíĺ íŕ ęëŕâčŕňóđŕňŕ."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ĺňî ďúëĺí ńďčńúę íŕ äîńňđúďíčňĺ ęëŕâčŕňóđč"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Ęŕęúâ ęëŕń číńňŕëŕöč˙ ćĺëŕĺňĺ ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Číńňŕëčđŕé/Îáíîâč"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Ňîâŕ íîâŕ číńňŕëŕöč˙ ëč ĺ čëč îáíîâ˙âŕíĺ ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Ďđĺďîđú÷čňĺëíŕ"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ĺęńďĺđňíŕ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Îáíîâ˙âŕíĺ"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Îáíîâ˙âŕíĺ íŕ čçáîđŕ íŕ ďŕęĺňč"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Ěîë˙, čçáĺđĺňĺ ňčď íŕ ěčřęŕňŕ."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Ďîđň íŕ ěčřęŕňŕ"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Ěîë˙, čçáĺđĺňĺ ęúě ęîé ńĺđčĺí ďîđň ĺ ńâúđçŕíŕ ěčřęŕňŕ âč."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Čěčňŕöč˙ íŕ áóňîíč"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Čěčňŕöč˙ íŕ 2 áóňîíŕ"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Čěčňŕöč˙ íŕ 3 áóňîíŕ"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Íŕńňđîéęŕ íŕ PCMCIA ęŕđňčňĺ ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Íŕńňđîéęŕ íŕ IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "í˙ěŕ ä˙ëîâĺ íŕ đŕçďîëîćĺíčĺ"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Ďđĺňúđńâŕíĺ íŕ ä˙ëîâĺňĺ çŕ íŕěčđŕíĺ íŕ ňî÷ęč íŕ ěîíňčđŕíĺ"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Čçáĺđĺňĺ ěĺńňŕ çŕ ěîíňčđŕíĺ"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Íĺ ěîăŕ äŕ đŕç÷ĺňŕ ňŕáëčöŕňŕ íŕ ä˙ëîâĺňĺ, ďđĺęŕëĺíî ĺ ďîâđĺäĺíŕ çŕ ěĺí :(\n"
-"Ěîăŕ äŕ ńĺ îďčňŕě äŕ čç÷čńň˙ ëîřčňĺ ä˙ëîâĺ (ÂŃČ×ĘČ ÄŔÍÍČ ůĺ áúäŕň "
-"çŕăóáĺíč!).\n"
-"Äđóăî đĺřĺíčĺ ĺ äŕ çŕáđŕíčňĺ íŕ DrakX ďîďđŕâ˙ ňŕáëčöŕňŕ ń ä˙ëîâĺ.\n"
-"(ăđĺřęŕňŕ ĺ %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake íĺ óńď˙ äŕ đŕç÷ĺňĺ ďđŕâčëíî ňŕáëčöŕňŕ íŕ ä˙ëîâĺňĺ.\n"
-"Ďđîäúëćčňĺ íŕ ńîáńňâĺí đčńę !"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Í˙ěŕ ńâîáîäíî ě˙ńňî çŕ 1 ĚÁ ńňŕđňčđŕůî ďîëĺ ! Číńňŕëŕöč˙ňŕ ůĺ ďđîäúëćč, íî, "
-"çŕ äŕ ńňŕđňčđŕňĺ ńčńňĺěŕňŕ ńč, ůĺ ňđ˙áâŕ äŕ ńúçäŕäĺňĺ ńňŕđňčđŕůî ďîëĺ â "
-"DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Íĺ ĺ íŕěĺđĺí ăëŕâĺí ä˙ë çŕ íŕäăđŕćäŕíĺ"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root ä˙ë"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Ęîé ĺ root-ä˙ëúň (/) íŕ ńčńňĺěŕňŕ âč ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Íŕëŕăŕ ńĺ đŕ đĺńňŕđňčđŕňĺ, ďđĺäč ěîäčôčęŕöččňĺ äŕ ďđĺäčçâčęŕň ĺôĺęň"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Čçáĺđĺňĺ ä˙ëîâĺňĺ, ęîčňî čńęŕňĺ äŕ ôîđěŕňčđŕňĺ"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Ďđîâĺđęŕ çŕ ëîřč ńĺęňîđč ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Ôîđěŕňčđŕíĺ íŕ ä˙ëowe"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Ńúçäŕâŕíĺ č ôîđěŕňčđŕíĺ íŕ ôŕéëŕ %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Í˙ěŕ äîńňŕňú÷íî swap çŕ ďđčęëţ÷âŕíĺ íŕ číńňŕëŕöč˙ňŕ, ěîë˙ äîáŕâĺňĺ ěŕëęî"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ňúđń˙ íŕëč÷íč ďŕęĺňč"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ňúđń˙ ďŕęĺňč çŕ îáíîâ˙âŕíĺ"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Ńčńňĺěŕňŕ âč í˙ěŕ äîńňŕňú÷íî ě˙ńňî çŕ číńňŕëŕöč˙ čëč îáíîâ˙âŕíĺ (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Ďúëíŕ (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Ěčíčěŕëíŕ (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Ďđĺďîđú÷čňĺëíŕ (%dMb)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Ěîćĺ čçáĺđĺňĺ çŕđĺćäŕíĺ čëč çŕďčń íŕ čçáîđŕ íŕ ďŕęĺňč íŕ ôëîďč.\n"
-"Ôîđěŕňúň ĺ ńúůč˙ň ęŕňî auto_install ăĺíĺđčđŕíčňĺ äčńęĺňč."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Çŕđĺäč îň äčńęĺňŕ"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Çŕđĺćäŕíĺ îň äčńęĺňŕ"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Čçáîđ íŕ ďŕęĺňč"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Ńëîćĺňĺ äčńęĺňŕ ńúäúđćŕůŕ čçáîđ íŕ ďŕęĺňč"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Çŕďŕçč íŕ äčńęĺňŕ"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Čçáđŕíŕňŕ ăîëĺěčíŕ ĺ ďî-ăîë˙ěŕ îň äîńňúďíîňî ďđîńňđŕíńňâî"
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Čçáĺđĺňĺ ďŕęĺňč çŕ číńňŕëčđŕíĺ"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Ĺäčí ěîěĺíň"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ŕęî čěŕňĺ âńč÷ęč CD-ňŕ îň ńďčńúęŕ ďî-ăîđĺ, íŕňčńíĺňĺ Ok.\n"
-"Ŕęî í˙ěŕňĺ íčňî ĺäíî îň ňĺçč CD-ňŕ, íŕňčńíĺňĺ Îňě˙íŕ.\n"
-"Ŕęî âč ëčďńâŕň í˙ęîč CD-ňŕ, ěŕőíĺňĺ ăč, č íŕňčńíĺňĺ Ok. "
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM îçŕăëŕâĺí \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ďîäăîňâ˙ě číńňŕëŕöč˙ňŕ"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Číńňŕëčđŕě ďŕęĺň %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Ńëĺä číńňŕëŕöčîííŕ íŕńňđîéęŕ"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Ńëîćĺňĺ ńňŕđňčđŕůŕňŕ äčńęĺňŕ â óńňđîéńňâî %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Ńëîćĺňĺ äčńęĺňŕ çŕ îáíîâ˙âŕíĺ íŕ ěîäóëč â óńňđîéńňâî %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ńĺăŕ čěŕňĺ âúçěîćíîńňňŕ äŕ ńâŕëčňĺ ńîôňóĺđ ń öĺë ęîäčđŕíĺ.\n"
-"\n"
-"ÂÍČĚŔÍČĹ:\n"
-"\n"
-"Ďîđŕäč đŕçëč÷íčňĺ čçčńęâŕíč˙ ďîńňŕâĺíč îň ňîçč ńîôňóĺđ č îň ěíîăî\n"
-"ţđčńäčęöčč, ęëčĺíňčňĺ č/čëč ęđŕéíčňĺ ęëčĺíňč íŕ ňîçč ńîôňóĺđ ňđ˙áâŕ\n"
-"äŕ áúäŕň ńčăóđíč, ÷ĺ íîđěŕňčâíŕňŕ áŕçŕ čě ďîçâîë˙âŕ ńâŕë˙íĺňî, ďđîäŕćáŕňŕ\n"
-"č/čëč čçďîëçâŕíĺňî íŕ ňîçč ńîôňóĺđ.\n"
-"\n"
-"Â äîďúëíĺíčĺ ęëčĺíňúň č/čëč ęđŕéíč˙ ďîňđĺáčňĺë ňđ˙áâŕ äŕ âíčěŕâŕ ń ňîâŕ\n"
-"äŕíĺáč äŕ íŕđóřč ÷ŕńň îň íîđěŕňčâíŕňŕ áŕçŕ. Ęëčĺíňúň č/čëč ęđŕéíč˙ň\n"
-"ďîňđĺáčňĺë ňđ˙áâŕ äŕ óâŕćŕâŕ ďđčëĺćŕůčňĺ çŕęîíč, ňúé ęŕňî ňîé ůĺ ďîíĺńĺ\n"
-"ńŕíęöččňĺ.\n"
-" íčęŕęúâ ńëó÷ŕé Mandrakesoft čëč íĺăîâčňĺ ďđîčçâîäčňĺëč č/čëč\n"
-"ńďîěîůĺńňâóâŕňĺëčňĺ ěó íĺ íîń˙ň íčęŕęâŕ îňăîâîđíîńň çŕ ęŕęâčňî č äŕ ĺ\n"
-"ďđĺęč, ęîńâĺíč čëč ńëó÷ŕéíč âđĺäč (âęëţ÷čňĺëíî, íî íĺ ńŕěî îăđŕíč÷ĺíč â\n"
-"çŕăóáŕňŕ íŕ ďîëçč, ďđĺęúńâŕíĺ íŕ áčçíĺń, çŕăóáŕ íŕ ęîěĺđńčŕëíč äŕííč č\n"
-"äđóăč ďŕđč÷íč çŕăóáč, č ĺâĺíňóŕëíč îňăîâîđíîńňč č îáĺůĺňĺíč˙ çŕ ďëŕůŕíĺ\n"
-"ďî ńúäĺáíč đĺřĺíč˙) ďđĺäčçâčęŕíč îň čçďîëçâŕíĺňî, ďîńňŕâ˙íĺňî čëč äîđč\n"
-"ńâŕë˙íĺňî íŕ ňîçč ńîôňóĺđ, äî ęîéňî ęëčĺíňúň č/čëč ęđŕéíč˙ň ďîňđĺáčňĺë\n"
-"ĺâĺíňóŕëíî ěîćĺ äŕ čěŕ äîńňúď ńëĺä ńúăëŕńčĺňî ń ňîâŕ ńďîđŕçóěĺíčĺ.\n"
-"\n"
-"Çŕ âń˙ęŕęâč âúďđîńč ďî ňîâŕ ńďîđŕçóěĺíčĺ, ěîë˙, ńâúđćĺňĺ ńĺ ń \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Ńâúđçâŕíĺ ń îăëĺäŕëíč˙ ńúđâúđ çŕ ďîëó÷ŕâŕíĺ íŕ ńďčńúęŕ ń ďŕęĺňčňĺ"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Čçáĺđĺňĺ îăëĺäŕëĺí ńúđâúđ,îň ęîéňî äŕ ďîëó÷čňĺ ďŕęĺňčňĺ"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Ńâúđçâŕíĺ ń îăëĺäŕëíč˙ ńúđâúđ çŕ ďîëó÷ŕâŕíĺ íŕ ńďčńúęŕ ń ďŕęĺňčňĺ"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Ęî˙ ĺ âđĺěĺâŕňŕ âč çîíŕ ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Őŕäđóĺđíč˙ň âč ÷ŕńîâíčę ĺ íŕńňđîĺí ďî GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Ŕâňîěŕňč÷íŕ ńčíőđîíčçŕöč˙ íŕ âđĺěĺňî (čçďîëçâŕ NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP ńúđâúđ"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Îňäŕëĺ÷ĺí CUPS ńúđâúđ"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Í˙ěŕ ďđčíňĺđ"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Čěŕňĺ ëč äđóă(č) ?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Îáîáůĺíčĺ"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Ěčřęŕ"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "×ŕńîâŕ çîíŕ"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Ďđčíňĺđ"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN ęŕđňŕ"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Çâóęîâŕ ęŕđňŕ"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV ęŕđňŕ"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Ëîęŕëíč ôŕéëîâĺ"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Âúâĺäĺňĺ ďŕđîëŕ çŕ root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Áĺç ďŕđîëŕ"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ďŕđîëŕňŕ ĺ ďđĺęŕëĺíî ďđîńňŕ (ňđ˙áâŕ äŕ áúäĺ äúëăŕ ďîíĺ %d ńčěâîëŕ)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Čäĺíňčôčęŕöč˙"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP ŕóňîđčçŕöč˙"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Áŕçîâ dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP ńúđâúđ"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS ŕóňîđčçŕöč˙"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS äîěĺéí"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS ńúđâúđ"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ęëčĺíňńę˙ň bootdisk ĺ íĺîáőîäčě çŕ ńňŕđňčđŕíĺ â Linux ńčńňĺěŕňŕ âč "
-"íĺçŕâčńčěî\n"
-"îň îáčęíîâĺíč˙ bootloader. Ňîâŕ ĺ ďîëĺçíî, ŕęî íĺ čńęŕňĺ äŕ číńňŕëčđŕňĺ\n"
-"SILO íŕ ńčńňĺěŕňŕ ńč, ŕęî í˙ęî˙ äđóăŕ îďĺđŕöčîííŕ ńčńňĺěŕ ěŕőíĺ SILO\n"
-"čëč ŕęî SILO íĺ đŕáîňč ń őŕđäóĺđíŕňŕ âč íŕńňđîéęŕ. Ęëčĺíňńęč˙ň bootdisk\n"
-"ěîćĺ äŕ áúäĺ čçďîëçâŕí ńúń\n"
-"ńďŕńčňĺëíč˙ň îáđŕç íŕ Mandrake, óëĺńí˙âŕęč âúçńňŕíîâ˙âŕíĺňî ďđč đĺäęč\n"
-"ńëó÷ŕč íŕ ńđčâ.\n"
-"\n"
-"Ŕęî čńęŕňĺ äŕ ńúçäŕäĺňĺ bootdisk çŕ âŕřŕňŕ ńčńňĺěŕ, ďîńňŕâĺňĺ äčńęĺňŕ â\n"
-"ďúđâîňî óńňđîéńňâî č íŕňčńíĺňĺ \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Ďúđâî ôëîďč óńňđîéńňâî"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Âňîđî ôëîďč óńňđîéńňâî"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ďđĺńęî÷č"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ęëčĺíňńęč bootdisk ĺ íĺîáőîäčě çŕ ńňŕđňčđŕíĺ â Linux ńčńňĺěŕňŕ âč "
-"íĺçŕâčńčěî\n"
-"îň îáčęíîâĺíŕňŕ çŕđĺćäŕůŕ ďđîăđŕěŕ. Ňîâŕ ĺ ďîëĺçíî, ŕęî íĺ čńęŕňĺ äŕ "
-"číńňŕëčđŕňĺ\n"
-"LILO (čëč GRUB) íŕ ńčńňĺěŕňŕ ńč čëč ŕęî í˙ęî˙ äđóăŕ îďĺđŕöčîííŕ ńčńňĺěŕ "
-"ěŕőíĺ LILO čëč LILO íĺ\n"
-"đŕáîňč ń őŕđäóĺđíŕňŕ âč íŕńňđîéęŕ. Bootdisk-úň ěîćĺ äŕ áúäĺ čçďîëçâŕí ńúń\n"
-"ńďŕńčňĺëíŕňŕ äčńęĺňŕ íŕ Mandrake, óëĺńí˙âŕůŕ âúçńňŕíîâ˙âŕíĺňî ďđč đĺäęč\n"
-"ńëó÷ŕč íŕ ńđčâ. Čńęŕňĺ ëč äŕ ńúçäŕě bootdisk çŕ ńčńňĺěŕňŕ âč ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ńúćŕë˙âŕě í˙ěŕ ôëîďč"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Čçáĺđĺňĺ ôëîďč äđŕéâ,ęúäĺňî äŕ íŕďđŕâčňĺ ńňŕđňčđŕůŕ äčńęĺňŕ"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ńëîćĺňĺ äčńęĺňŕ â óńňđîéńňâî %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Ńúçäŕâŕíĺ íŕ ńňŕđňčđŕůŕ äčńęĺňŕ"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ďîäăîňîâęŕ íŕ bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Čçăëĺćäŕ čěŕňĺ ńňŕđîâđĺěńęŕ čëč íĺčçâĺńňíŕ\n"
-"ěŕřčíŕ, íŕ ęî˙ňî yaboot í˙ěŕ äŕ ďđîđŕáîňč.\n"
-"Číńňŕëŕöč˙ňŕ ůĺ ďđîäúëćč, íî ůĺ ňđ˙áâŕ\n"
-"äŕ čďîëçâŕňĺ BootX, çŕ äŕ ńňŕđňčđŕňĺ ěŕřčíŕňŕ ńč"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Čńęŕňĺ ëč äŕ čçďîëçâŕňĺ aboot ?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ăđĺřęŕ ďđč číńňŕëčđŕíĺ íŕ aboot, \n"
-"äŕ ńĺ îďčňŕě ëč äŕ ďđîäúëćŕ číńňŕëŕöč˙ňŕ äîđč, ŕęî ňîâŕ óíčćňîćč ďúđâč˙ ä˙ë ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Číńňŕëčđŕíĺ íŕ bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Číńňŕëŕöč˙ňŕ íŕ bootloader ďđîâŕëĺíŕ. Ďî˙âč ńĺ ńëĺäíŕňŕ ăđĺřęŕ:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Ěîćĺ áč ńĺ íóćäŕĺňĺ äŕ ďđîěĺíčňĺ Open Firmware ńňŕđňîâîňî óńňđîéńňâî,\n"
-" çŕ äŕ ďóńíĺňĺ çŕđĺćäŕůŕňŕ ďđîăđŕěŕ. Ŕęî íĺ âčćäŕňĺ ďîäńęŕçęŕňŕ č ďđč\n"
-" đĺńňŕđňčđŕíĺ, çŕäđúćňĺ Command-Option-O-F ďđč đĺńňŕđňčđŕíĺ č âúâĺäĺňĺ:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Ńëĺä ęîĺňî íŕďčřĺňĺ: shut-down\n"
-"Ďđč ńëĺäâŕůîňî đĺńňŕđňčđŕíĺ áč ňđ˙áâŕëî äŕ âčäĺňĺ ďîäńęŕçęŕňŕ."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ńëîćĺňĺ ďđŕçíŕ äčńęĺňŕ â óńňđîéńňâî %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Ďîäăîňâ˙ě äčńęĺňŕ ń ŕâňîěŕňč÷íŕ číńňŕëŕöč˙"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Í˙ęîč ĺňŕďč íĺ ńŕ çŕâúđřĺíč.\n"
-"\n"
-"Íŕčńňčíŕ ëč čńęŕňĺ äŕ čçëĺçĺňĺ ńĺăŕ ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Ďîçäđŕâëĺíč˙, číńňŕëŕöč˙ňŕ ĺ ďđĺęëţ÷ĺíŕ.\n"
-"Ďđĺěŕőíĺňĺ ńňŕđňîâîňî óńňđîéńňâî č íŕňčńĺíĺ Enter çŕ äŕ đĺńňŕđňčđŕéňĺ.\n"
-"\n"
-"\n"
-"Çŕ číôîđěŕöč˙ îňíîńíî ďîďđŕâęč, íŕ ňŕçč âĺđńč˙ íŕ Mandrake Linux,\n"
-"ńĺ ęîíńóëňčđŕéňĺ ń Errata, íŕ ŕäđĺń : \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Číôîđěŕöč˙ çŕ íŕńňđîéâŕíĺ íŕ ńčńňĺěŕňŕ âč ěîćĺňĺ äŕ íŕěĺđčňĺ â\n"
-"ńëĺäčíńňŕëŕöčîííŕňŕ ăëŕâŕ îň Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Ďîäăîňâč äčńęĺňŕ çŕ ŕâňîěŕňč÷íŕ číńňŕëŕöč˙"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Ŕâňîěŕňč÷íŕňŕ číńňŕëŕöč˙ ěîćĺ äŕ áúäĺ íŕďúëíî ŕâňîěŕňčçčđŕíŕ,\n"
-"â ňŕęúâ ńëó÷ŕé ůĺ ďđĺâçĺěĺ ňâúđäč˙ âč äčńę !!!\n"
-"(ňîâŕ ĺ çŕ ďđĺäíŕçíŕ÷ĺíî çŕ číńňŕëčđŕíĺ íŕ äđóăŕ ěŕřčíŕ).\n"
-"\n"
-"Ěîćĺ áč čńęŕňĺ äŕ ďîâňîđčňĺ číńňŕëŕöč˙ňŕ.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Ŕâňîěŕňčçčđŕí"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ďîâňîđč"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Çŕďŕçč čçáîđ íŕ ďŕęĺňč"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Číńňŕëŕöč˙ íŕ Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> ěĺćäó ĺëĺěĺíňčňĺ | <Space> čçáčđŕ | <F12> ńëĺäâŕů ĺęđŕí"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "ëčďńâŕ kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Čçáĺđĺňĺ ôŕéë"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Íŕďđĺäíč÷ŕâ"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Ěîë˙ čç÷ŕęŕéňĺ"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Číôîđěŕöč˙"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Đŕçřčđč äúđâîňî"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Čç÷čńňč äúđâîňî"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Ďđĺâęëţ÷âŕíĺ ěĺćäó íîđěŕëíî č ńîđňčđŕíĺ ďî ăđóďč"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Ëîř čçáîđ, îďčňŕéňĺ îňíîâî\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Âŕřč˙ň čçáîđ ? (ďî ďîäđŕçáčđŕíĺ ĺ %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Âŕřč˙ň čçáîđ ? (ďî ďîäđŕçáčđŕíĺ ĺ %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Îďöčč: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Čńęŕňĺ ëč äŕ čçďîëçâŕňĺ aboot ?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Âŕřč˙ň čçáîđ ? (ďî ďîäđŕçáčđŕíĺ ĺ %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "×ĺřęŕ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Íĺěńęŕ"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Äâîđŕę"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Čńďŕíńęŕ"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Ôčíëŕíäńęŕ"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ôđĺíńęŕ"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Íîđâĺćęŕ"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Ďîëńęŕ"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Đóńęŕ"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Řâĺäńęŕ"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UĘ ęëŕâčŕňóđŕ"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US ęëŕâčŕňóđŕ"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Ŕëáŕíńęŕ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Ŕđěĺíńęŕ (ńňŕđŕ)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Ŕđěĺíńęŕ (ďčřĺůŕ ěŕřčíŕ)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Ŕđěĺíńęŕ (ôîíĺňč÷ĺí)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Ŕçĺđáŕéäćŕíńęŕ (ëŕňčíčöŕ)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Áĺëăčéńęŕ"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Ŕđěĺíńęŕ (ôîíĺňč÷ĺí)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Áúëăŕđńęŕ"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Áđŕçčëńęŕ (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Áĺëŕđóńęŕ"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Řâĺéöŕđńęŕ (íĺěńęŕ íŕđĺäáŕ)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Řâĺéöŕđńęŕ (ôđĺíńęč íŕđĺäáŕ)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "×ĺřęŕ (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Íĺěńęŕ (áĺç íĺđŕáîňĺůč ęëŕâčřč)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Äŕňńęŕ"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Äâîđŕę (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Äâîđŕę (Íîđâĺćęŕ)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Äâîđŕę (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Ĺńňîíńęŕ"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ăđóçčíńęŕ (\"Đóńęŕ\" íŕđĺäáŕ)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ăđóçčíńęŕ (\"Ëŕňčíńęŕ\" íŕđĺäáŕ)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Ăđúöęŕ"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Óíăŕđńęŕ"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Őúđâŕňńęŕ"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Čçđŕĺëńęŕ"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Čçđŕĺëńęŕ (ôîíĺňč÷íŕ)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Čđŕíńęŕ"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Čńëŕíäńęŕ"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Čňŕëčŕíńęŕ"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "ßďîíńęŕ 106 ęëŕâčřŕ"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Ęîđĺéńęŕ ęëŕâčŕňóđŕ"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Ëŕňčíîŕěĺđčęŕíńęŕ"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëčňâčéńęŕ AZERTY (ńňŕđŕ)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëčňâčéńęŕ AZERTY (íîâŕ)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëčňâčéńęŕ \"÷čńëîâŕ đĺäčöŕ\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëčňâčéńęŕ \"ôîíĺňč÷ĺí\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Ëŕňâčéńęŕ"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Ěŕęĺäîíńęŕ"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Őîëŕíäńęŕ"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Ďîëńęŕ (QWERTY íŕđĺäáŕ)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Ďîëńęŕ (QWERTZ íŕđĺäáŕ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Ďîđňóăŕëńęŕ"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Ęŕíŕäńęŕ (Ęâĺáĺę)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Đóěúíńęŕ (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Đóěúíńęŕ (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Đóńęŕ (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Ńëîâĺíńęŕ"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Ńëîâŕřęŕ (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Ńëîâŕřęŕ (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Ńđúáńęŕ (ęčđčëčöŕ)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Ňŕáëčöŕ"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Ňŕéâŕíńęŕ ęëŕâčŕňóđŕ"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Ňŕäćčęčńňŕíńęŕ ęëŕâčŕňóđŕ"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Ňóđńęŕ (ňđŕäčöčîíĺí \"F\" ěîäĺë)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Ňóđńęŕ (ěîäĺđĺí \"Q\" ěîäĺë)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Óęđŕčíńęŕ"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US ęëŕâčŕňóđŕ (ěĺćäóíŕđîäíŕ)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Âčĺňíŕěńęŕ \"÷čńëîâŕ đĺäčöŕ\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Ţăîńëŕâńęŕ (ëŕňčíčöŕ)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "\"Îěŕăüîńŕí ęđúă\" îň ěîíňčđŕíč˙: %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Ďúđâî ďđĺěŕőíč ëîăč÷íčňĺ ä˙ëîâî\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Ěčřęŕ íŕ Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Îáčęíîâĺííŕ PS2 ěčřęŕ"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington THinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genuis NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 áóňîí"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Îáčęíîâĺííŕ 2-áóňîííŕ ěčřęŕ"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Îáů"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Wheel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "ńĺđčéíŕ"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Îáčęíîâĺííŕ 3-áóňîííŕ ěčřęŕ"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (ńĺđčéíŕ, îň ńňŕđč˙ ňčď C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "BUS ěčřęŕ"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 áóňîíŕ"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 áóňîíŕ"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "í˙ěŕ"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Áĺç ěčřęŕ"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Ěîë˙, ďđîáâŕéňĺ ěčřęŕňŕ ńč"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Çŕ äŕ ŕęňčâčđŕňĺ ěčřęŕňŕ ńč,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ÁÓŇÍĹŇĹ ŇÎĎ×ĹŇÎ !"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Çŕâúđřč"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Ńëĺäâŕů ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Ďđĺäčřĺí"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Âńč÷ęî ďđŕâčëíî ëč ĺ ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ńâúđćč ńĺ ęúě Číňĺđíĺň"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Íŕé-÷ĺńňč˙ íŕ÷čí çŕ ńâúđçâŕíĺ ÷đĺç ADSL ĺ PPPOE.\n"
-"Í˙ęîč âđúçęč čçďîëçâŕň PPTP, ŕ maëęî čçďîëçâŕň DHCP.\n"
-"Ŕęî íĺ çíŕĺňĺ, čçáĺđĺňĺ 'čçďîëçâŕé PPPOE'."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "čçďîëçâŕé DHCP"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "čçďîëçâŕé PPPOE"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "čçďîëçâŕé PPPTP"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Ęŕęúâ DHCP ęëčĺíň čńęŕňĺ äŕ čçďîëçâŕňĺ ?\n"
-"Ďî ďîäđŕçáčđŕíĺ ĺ dhcpcd ?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Íĺ áĺřĺ íŕěĺđĺí ěđĺćîâ ŕäŕďňĺđ â ńčńňĺěŕňŕ âč.\n"
-"Íĺ ěîćĺňĺ äŕ íŕńňđîčňĺ ňŕęúâ âčä âđúçęŕ."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Čçáĺđĺňĺ ěđĺćîâ číňĺđôĺéń"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Ěîë˙, čçáĺđĺňĺ ęîé ěđĺćîâ ŕäŕďňĺđ äŕ čçďîëçâŕě çŕ âđúçęŕ ęúě Číňĺđíĺň"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "íĺ ĺ îňęđčňŕ ěđĺćîâŕ ęŕđňŕ"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Íŕńňîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Ěîë˙, âúâĺäĺňĺ čěĺ íŕ őîńň ŕęî ăî çíŕĺňĺ.\n"
-"Í˙ęîé DHCP ńúđâúđč čçčńęâŕň ňîâŕ çŕ äŕ đŕáîň˙ň.\n"
-"Host čěĺňî ňđ˙áâŕ äŕ áóäĺ íŕďúëíî ęâŕëčôčöčđŕíî čěĺ,\n"
-"ęŕňî ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Čěĺ íŕ őîńň:"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Ěŕăüîńíčę çŕ íŕńňđîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Âúířĺí ISDN ěîäĺě"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Âúňđĺříŕ ISDN ęŕđňŕ"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Ęŕęúâ ĺ ňčďúň íŕ ISDN âđúçęŕňŕ ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Ęî˙ ISDN íŕńňđîéęŕ ďđĺäďî÷čňŕňĺ ?\n"
-"\n"
-"* Ńňŕđŕňŕ íŕńňđîéęŕ čçďîëçâŕ isdn4net. Ńúäúđćŕ ěîůíč číńňđóěĺíňč\n"
-" íî ĺ ęŕďđčçíŕ çŕ íŕńňđîéęŕ č íĺ ĺ ńňŕíäŕđňíŕ.\n"
-"\n"
-"* Íîâŕňŕ íŕńňđîéęŕ ĺ ďî-ëĺńíŕ çŕ đŕçáčđŕíĺ, ďî ńňŕíäŕđňíŕ,\n"
-" íî ń ďî-ěŕëęî číńňđóěĺíňč.\n"
-"\n"
-"Ďđĺďîđú÷âŕěĺ âč îëĺęîňĺíŕňŕ íŕńňđîéęŕ.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Íîâŕ íŕńňđîéęŕ (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Ńňŕđŕ íŕńňđîéęŕ (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Íŕńňđîéęŕ íŕ IDSN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Ďîńî÷ĺňĺ äîńňŕâ÷čęŕ ńč.\n"
-" Ŕęî íĺ ĺ â ńďčńúęŕ, čçáĺđĺňĺ Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Ďđîňîęîë Ĺâđîďŕ"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Ďđîňîęîë Ĺâđîďŕ (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Ďđîňîęîë çŕ îńňŕíŕëč˙ ńâ˙ň"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ďđîňîęîë çŕ îńňŕíŕëč˙ ńâ˙ň\n"
-" áĺç D-Ęŕíŕë (íŕĺňŕ ëčíč˙)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Ęŕęúâ ďđîňîęîë ćĺëŕĺňĺ äŕ ďđîěĺíčňĺ ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Ęŕęúâ ňčď ęŕđňŕ čěŕňĺ ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Íĺ çíŕě"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ŕęî čěŕňĺ ISA ęŕđňŕ, ńňîéíîńňčňĺ íŕ ńëĺäâŕůč˙ ĺęđŕí ňđ˙áâŕ äŕ ńŕ âĺđíč.\n"
-"\n"
-"Ŕęî čěŕňĺ PCMCIA ęŕđňŕ, ůĺ ňđ˙áâŕ äŕ çíŕĺňĺ IRC č IO íŕ ęŕđňŕňŕ ńč.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Îňęŕç"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Íŕňŕňúę"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Ęî˙ ĺ ISDN ęŕđňŕňŕ âč ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Îňęđčňŕ ĺ ISDN PCI ęŕđňŕ, íî ń íĺďîçíŕň ňčď. Ěîë˙ čçáĺđĺňĺ í˙ęî˙ PCI ęŕđňŕ "
-"îň ńëĺäâŕůč˙ň ĺęđŕí."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Íĺ ĺ íŕěĺđĺíŕ ISDN PCI ęŕđňŕ. Ěîë˙ čçáĺđĺňĺ îň ńëĺäâŕůč˙ň ĺęđŕí."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ěîë˙, čçáĺđĺňĺ ńĺđčĺí ďîđň ęúě ęîéňî ńâúđçŕí ěîäĺěúň âč."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Îďöčč çŕ čçáčđŕíĺ ďî ňĺëĺôîí"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Čěĺ íŕ âđúçęŕňŕ"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Ňĺëĺôîíĺí íîěĺđ"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Ďîňđĺáčňĺëńęî čěĺ"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Áŕçčđŕíŕ íŕ ńęđčďň"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Áŕçčđŕíŕ íŕ ňĺđěčíŕë"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Čěĺ íŕ äîěĺéíŕ"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Ďúđâč DNS ńúđâúđ (ďî čçáîđ)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Âňîđč DNS ńúđâúđ (ďî čçáîđ)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Ěîćĺňĺ äŕ ńĺ îňâúđćĺňĺ čëč äŕ ďđĺíŕńňđîčňĺ âđúçęŕňŕ."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Ěîćĺňĺ äŕ ďđĺíŕńňđîčňĺ âđúçęŕňŕ."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Â ěîěĺíňŕ ńňĺ ńâúđçŕíč ęúě Číňĺđíĺň"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Ěîćĺňĺ äŕ ńĺ ńâúđćĺňĺ ęúě Číňĺđíĺň čëč äŕ ďđĺíŕńňđîčňĺ âđúçęŕňŕ."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Â ěîěĺíňŕ íĺ ńňĺ ńâúđçŕíč ęúě Číňĺđíĺň"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Ńâúđćč"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Îňâúđćč"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Â ěîěĺíňŕ íŕńňđîéâŕě ěđĺćŕňŕ"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Číňĺđíĺň âđúçęŕ č íŕńňđîéęŕ"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ńĺăŕ ůĺ íŕńňđîčě %s âđúçęŕňŕ."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ńĺăŕ ůĺ íŕńňđîčě %s âđúçęŕňŕ.\n"
-"\n"
-"Íŕňčńíĺňĺ OK, çŕ äŕ ďđîäúëćčňĺ."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Íŕńňđîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Ňúé ęŕňî ďđŕâčňĺ ěđĺćîâŕ číńňŕëŕöč˙, ěđĺćŕňŕ âč âĺ÷ĺ ĺ íŕńňđîĺíŕ.\n"
-"Öúęíĺňĺ Ok, çŕ äŕ çŕďŕçčňĺ íŕńňđîéęŕňŕ, čëč Îňě˙íŕ, çŕ äŕ ďđĺíŕńňîčňĺ "
-"Číňĺđíĺň č ěđĺćîâŕňŕ ńč âđúçęŕ.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Äîáđĺ äîřëč ďđč ěŕăüîńíčęŕ çŕ íŕńňđîéęŕ íŕ ěđĺćŕ\n"
-"\n"
-"Âčĺ ńňĺ íŕ ďúň äŕ íŕńňđîčňĺ Číňĺđíĺň/ěđĺćîâŕňŕ ńč âđúçęŕ.\n"
-"Ŕęî íĺ čńęŕňĺ äŕ čçďîëçâŕňĺ ŕâňîěŕňč÷íî çŕńč÷ŕíĺ, čçęëţ÷ĺňĺ ęóňčéęŕňŕ.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Čçáĺđĺňĺ ďđîôčë çŕ íŕńňđîéęŕ"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Čçďîëçâŕé ŕâňîěŕňč÷íî çŕńč÷ŕíĺ"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Îňęđčâŕíĺ íŕ óńňđîéńňâŕ ..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Îáčęíîâĺíŕ ěîäĺěíŕ âđúçęŕ"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "çŕńĺ÷ĺí íŕ ďîđň %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN âđúçęŕ"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "çŕńĺ÷ĺíŕ %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL âđúçęŕ"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "çŕńĺ÷ĺí íŕ číňĺđôĺéń %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Ęŕáĺëíŕ âđúçęŕ"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "çŕńĺ÷ĺíŕ ĺ ęŕáĺëíŕ âđúçęŕ"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN âđúçęŕ"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet ęŕđňč çŕńĺ÷ĺíč"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Čçáĺđĺňĺ âđúçęŕňŕ, ęîéňî čńęŕňĺ äŕ čçďîëçâŕňĺ"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Íŕńňđîčëč ńňĺ í˙ęîëęî íŕ÷číŕ çŕ âđúçęŕ ęúě Číňĺđíĺň.\n"
-"Čçáĺđĺňĺ ňîçč, ęîéňî čńęŕňĺ äŕ čçďîëçâŕňĺ.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Číňĺđíĺň âđúçęŕ"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Čńęŕňĺ ëč äŕ ńňŕđňčđŕňĺ âđúçęŕňŕ ńč ďđč çŕđĺćäŕíĺ ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Íŕńňđîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Ěđĺćŕňŕ ňđ˙áâŕ äŕ áúäĺ đĺńňŕđňčđŕíŕ"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Čçíčęíŕ ďđîáëĺě ďđč đĺńňŕđňčđŕíĺňî íŕ ěđĺćŕňŕ:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Ďîçäđŕâëĺíč˙, ěđĺćîâŕňĺ č Číňĺđíĺň íŕńňđîéęŕňŕ ĺ çŕâúđřĺíŕ.\n"
-"\n"
-"Íŕńňđîéęčňĺ ůĺ áúäŕň ďđčëîćĺíč ęúě ńčńňĺěŕňŕ âč.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Ńëĺä ęŕňî ńňŕíĺ ňîâŕ, ďđĺďîđú÷âŕěĺ âč äŕ đĺńňŕđňčđŕňĺ X\n"
-"ńđĺäŕňŕ ńč, çŕ äŕ čçáĺăíĺňĺ ďđîáëĺěč ńúń ńě˙íŕňŕ čěĺňî íŕ őîńňŕ."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ÂÍČĚŔÍČĹ: Ňîâŕ óńňđîéńňâî âĺ÷ĺ ĺ íŕńňđîĺíî äŕ ńĺ ńâúđçâŕ ęúě Číňĺđíĺň.\n"
-"Ďđîńňî ďđčĺěĺňĺ, çŕ äŕ îńňŕâčňĺ óńňđîéńňâîňî íŕńňđîĺíî.\n"
-"Ďîďđŕâęŕňŕ íŕ ďîëĺňŕňŕ ďî-äîëó ůĺ ďđĺçŕďčřĺ ňŕçč íŕńňđîéęŕ."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Ěîë˙, âúâĺäĺňĺ IP íŕńňđîéęčňĺ çŕ ňŕçč ěŕřčíŕ.\n"
-"Âń˙ęî óńňđîéńňâî ňđ˙áâŕ äŕ áúäĺ âúâĺäĺíî ęŕňî IP ŕäđĺń\n"
-"ń ňî÷ęîâî-äĺńĺňč÷íî îçíŕ÷ĺíčĺ (íŕďđčěĺđ, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Íŕńňđîéęŕ íŕ ěđĺćîâîňî óńňđîéńňâî %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (äđŕéâĺđ %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP ŕäđĺń"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Ěđĺćîâŕ ěŕńęŕ"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Ŕâňîěŕňč÷ĺí IP ŕäđĺń"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ŕäđĺńúň ňđ˙áâŕ äŕ áúäĺ âúâ ôîđěŕň 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Ěîë˙, âúâĺäĺňĺ host name çŕ ěŕřčíŕňŕ.\n"
-"Host čěĺňî ňđ˙áâŕ äŕ áóäĺ íŕďúëíî ęâŕëčôčöčđŕíî čěĺ,\n"
-"ęŕňî ``mybox.mylab.myco.com''.\n"
-"Ěîćĺňĺ ńúůî äŕ âúâĺäĺňĺ IP ŕäđĺńŕ íŕ Âŕřč˙ gateway, ŕęî čěŕňĺ ňŕęúâ"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS ńúđâúđ"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway óńňđîéńňâî"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Íŕńňđîéęŕ íŕ proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Ďđîńëĺä˙âŕíĺ íŕ ID íŕ ěđĺćîâŕňŕ ęŕđňŕ (ďîëĺçíî ďđč ëŕďňîďč)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy-ńúđâúđŕ ňđ˙áâŕ äŕ ĺ http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-ńúđâúđŕ ňđ˙áâŕ äŕ ĺ ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Íŕńňđîéęŕ íŕ Číňĺđíĺň"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Čńęŕňĺ ëč ńĺăŕ äŕ îďčňŕňĺ âđúçęŕ ęúě Číňĺđíĺň ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Čçďđîáâŕíĺ íŕ âđúçęŕňŕ..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ńčńňĺěŕňŕ â ěîěĺíňŕ ĺ ńâúđçŕíŕ ęúě Číňĺđíĺň."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Çŕ âŕřŕ ńčăóđíîńň, ńĺăŕ ň˙ ůĺ áúäĺňĺ îňâúđçŕíŕ."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Ńčńňĺěŕňŕ íĺ čçăëĺćäŕ ńâúđçŕíŕ ęúě Číňĺđíĺň.\n"
-"Îďčňŕéňĺ ńĺ äŕ ďđĺíŕńňđîčňĺ âđúçęŕňŕ."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Íŕńňđîéęŕ íŕ âđúçęŕňŕ"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Ěîë˙, ďîďúëíĺňĺ čëč ďđîâĺđĺňĺ ďîëĺňî ďî-äîëó"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ íŕ ęŕđňŕňŕ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Ďŕěĺň (DMA) íŕ ęŕđňŕňŕ"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO íŕ ęŕđňŕňŕ"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 íŕ ęŕđňŕňŕ"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 íŕ ęŕđňŕňŕ"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Ëč÷íč˙ âč ňĺëĺôîíĺí íîěĺđ"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Čěĺ íŕ äîńňŕâ÷čęŕ (íŕďđ. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Ňĺëĺôîíĺí íîěĺđ íŕ äîńňŕâ÷čęŕ"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1-âč DNS íŕ äîńňŕâ÷čęŕ (ďî ćĺëŕíčĺ)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2-đč DNS íŕ äîńňŕâ÷čęŕ (ďî ćĺëŕíčĺ)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Čçáĺđĺňĺ ńňđŕíŕňŕ ńč"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Đĺćčě íŕ íŕáčđŕíĺ"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Ńęîđîńň íŕ âđúçęŕňŕ"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout íŕ âđúçęŕňŕ (â ńĺę)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Čěĺ íŕ ŕęŕóíňŕ (ďîňĺáčňĺëńęî čěĺ)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Ďŕđîëŕ íŕ ŕęŕóíňŕ"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ěîíňčđŕíĺňî íĺ óńď˙: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Đŕçřčđĺíč ä˙ëîâĺ íĺ ńĺ ďîääúđćŕň íŕ ňŕçč ďëŕňôîđěŕ"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Čěŕňĺ ďđŕçíčíŕ â ňŕáëčöŕňŕ ń ä˙ëîâĺňĺ, íî íĺ ěîăŕ äŕ ˙ čçďîëçâŕě.\n"
-"Ĺäčíńňâĺíč˙ň íŕ÷čí ĺ äŕ ďđĺěĺńňčňĺ ăëŕâíčňĺ ńč ä˙ëîâĺ, çŕ äŕ čěŕňĺ ďđŕçíî "
-"ě˙ńňî ńëĺä extended-ä˙ëîâĺňĺ"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Âúçńňŕíîâ˙âŕíĺňî îň ôŕéëŕ %s íĺ óńď˙: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Ăđĺřęŕ ďđč çŕďčń âúâ ôŕéëŕ %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Íĺůî ëîřî ńňŕâŕ ń óńňđîéńňâîňî âč.\n"
-"Ňĺńňŕ çŕ öĺëîńň íŕ äŕííčňĺ ďđîďŕäíŕ.\n"
-"Ňîâŕ çíŕ÷č, ÷ĺ ďčńŕíĺňî íŕ ęŕęâîňî č áčëî ďî äčńęŕ ůĺ ďđĺâđúůŕ\n"
-"ďđîčçâîëíî â áîęëóę"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "íóćĺí"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "âŕćĺí"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "ěíîăî äîáúđ"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "äîáúđ"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ńňŕâŕ"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Îáůŕ Unix Ďđčíňĺđíŕ Ńčńňĺěŕ"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Íîâî ďîęîëĺíčĺ"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Ëčíĺĺí Ďđčíňĺđĺí Äĺěîí"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Ďĺ÷ŕňŕé, Áĺç Îďŕřęŕ"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Ëîęŕëĺí ďđčíňĺđ"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Îňäŕëĺ÷ĺí ďđčíňĺđ"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Ďđčíňĺđ íŕ îňäŕëĺ÷ĺí CUPS ńúđâúđ"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Ďđčíňĺđ íŕ îňäŕëĺ÷ĺí LPD ńúđâúđ"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Ěđĺćîâ ďđčíňĺđ (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Ďđčíňĺđ íŕ SMB/Windows 95/98/NT ńúđâúđ"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Ďđčíňĺđ íŕ NetWare ńúđâúđ"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Âúâĺäĺňĺ URI íŕ ďĺ÷ŕňŕůî óńňđîéńňâî"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Ďđĺęŕđŕé đŕáîňŕňŕ ďđĺç ęîěŕíäŕ"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Íĺčçâĺńňĺí ěîäĺë"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Ëîęŕëĺí ďđčíňĺđ"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Îňäŕëĺ÷ĺí ďđčíňĺđ"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Ăđĺřęŕ ďđč çŕďčń âúâ ôŕéëŕ %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(íŕ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(íŕ ňŕçč ěŕřčíŕ)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP íŕ CUPS ńúđâúđŕ"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Ďî ďîäđŕçáčđŕíĺ)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Čçáĺđĺňĺ âđúçęŕ ęúě ďđčíňĺđŕ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Ęŕę ĺ ńâúđçŕí ďđčíňĺđúň ?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Îňäŕëĺ÷ĺíčňĺ íŕ CUPS ńúđâúđ ďđčíňĺđč íĺ ňđ˙áâŕ äŕ íŕńňđîéâŕňĺ\n"
-"ňóę; ňĺçč ďđčíňĺđč ůĺ áúäŕň çŕńĺ÷ĺíč ŕâňîěŕňč÷íî. Ěîë˙,\n"
-"čçáĺđĺňĺ \"Ďđčíňĺđ íŕ îňäŕëĺ÷ĺí CUPS ńúđâúđ\" â ňîçč ńëó÷ŕé."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Íŕńňđîéęŕ"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Îňäŕëĺ÷ĺí CUPS ńúđâúđ"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Ń îňäŕëĺ÷ĺíčňĺ CUPS ńúđâúđč, í˙ěŕ íóćäŕ äŕ íŕńňđîéâŕňŕ ęŕęúâňî\n"
-"č äŕ áčëî ďđčíňĺđ ňóę; CUPS ńúđâúđčňĺ číôîđěčđŕň ŕâňîěŕňč÷íî ěŕřčíŕňŕ\n"
-"çŕ ňĺőíčňĺ ďđčíňĺđč. Âńč÷ęč ďđčíňĺđč čçâĺńňíč íŕ ěŕřčíŕňŕ âč\n"
-"ńŕ čçđĺäĺíč â ďîëĺňî \"Ďđčíňĺđ ďî ďîđäđŕçáčđŕíĺ\". Čçáĺđĺňĺ\n"
-"ďđčíňĺđ ďî ďîäđŕçáčđŕíĺ çŕ ěŕřčíŕňŕ ńč îň ňŕě č öúęíĺňĺ íŕ áóňîíŕ\n"
-"\"Ďđčëîćč/Ďđĺďđî÷ĺňč ďđčíňĺđčňĺ\". Öúęíĺňĺ íŕ ńúůč˙ áóňîí, çŕ äŕ\n"
-"îďđĺńíčňĺ ńďčńúęŕ (ěîćĺ äŕ îňíĺěĺ äî 30 ńĺęóíäč ńëĺä ďóńęŕíĺňî\n"
-"íŕ CUPS, äîęŕňî âńč÷ęč îňäŕëĺ÷ĺíč ďđčíňĺđč ńňŕíŕň âčäčěč).\n"
-"Ęîăŕňî CUPS ńúđâúđ ĺ íŕ äđóăŕ ěđĺćŕ, ňđ˙áâŕ äŕ äŕäĺňĺ IP ŕäđĺń č,\n"
-"ĺâĺíňóëŕíî íîěĺđ íŕ ďîđň íŕ CUPS ńúđâúđŕ, çŕ äŕ âçĺěĺňĺ číôîđěŕöč˙\n"
-"çŕ ďđčíňĺđŕ îň ńúđâúđŕ, číŕ÷ĺ îńňŕâĺňĺ ďîëĺňî ďđŕçíî."
-
-#: ../../printerdrake.pm_.c:72
-#, fuzzy
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Îáčęíîâĺíî, CUPS ŕâňîěŕňč÷íî ńĺ íŕńňđîéâŕ ńďîđĺä ěđĺćîâŕňŕ ńđĺäŕ,\n"
-"ňŕęŕ ÷ĺ äŕ čěŕňĺ äîńňúď äî ďđčíňĺđčňĺ íŕ CUPS ńúđâúđŕ â ëîęŕëíŕňŕ\n"
-"âč ěđĺćŕ. Ŕęî íĺ ńđŕáîňč ęŕęňî ňđ˙áâŕ, čçęëţ÷ĺňĺ \"Ŕâňîěŕňč÷íŕ\n"
-"CUPS íŕńňđîéęŕ\" č ďîďđŕâĺňĺ ôŕéëŕ /etc/cups/cupsd.conf đú÷íî. Íĺ\n"
-"çŕáđŕâ˙éňĺ äŕ đĺńňŕđňčđŕňĺ CUPS ńëĺä ňîâŕ (ęîěŕíäŕ: \"service\n"
-"cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP ŕäđĺńúň ňđ˙áâŕ äŕ áúäĺ âúâ ôîđěŕň 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Íîěĺđúň íŕ ďîđňŕ ňđ˙áâŕ äŕ ĺ ö˙ëî ÷čńëî !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP íŕ CUPS ńúđâúđŕ"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Ďîđň"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Ŕâňîěŕňč÷íŕ íŕńňđîéęŕ íŕ CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Çŕńč÷ŕíĺ íŕ óńňđîéńňâŕ ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Ňĺńňâŕíĺ ďîđňîâĺňĺ"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Äîáŕâč ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Ëîęŕëĺí ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Îňäŕëĺ÷ĺí ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Čçďîëçâŕé ŕâňîěŕňč÷íî çŕńč÷ŕíĺ"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Čěĺ íŕ îňäŕëĺ÷ĺí ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "çŕńĺ÷ĺíŕ %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Âúâĺäĺňĺ URI íŕ ďĺ÷ŕňŕůî óńňđîéńňâî"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Ëîęŕëĺí ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Ěîë˙, čçáĺđĺňĺ ńĺđčĺí ďîđň ęúě ęîéňî ńâúđçŕí ěîäĺěúň âč."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Âúâĺäĺňĺ URI íŕ ďĺ÷ŕňŕůî óńňđîéńňâî"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Íŕńňđîéęŕ íŕ öâĺňîâĺ"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Číńňŕëčđŕíĺ íŕ ďŕęĺňč ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Číńňŕëčđŕíĺ íŕ ďŕęĺňč ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "×ĺňĺíĺ íŕ áŕçŕňŕ äŕííč îň ďđčíňĺđč ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "×ĺňĺíĺ íŕ áŕçŕňŕ äŕííč îň ďđčíňĺđč ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Îďöčč íŕ îňäŕëĺ÷ĺí lpd-ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Çŕ äŕ čçďîëçâŕňĺ îňäŕëĺ÷ĺí lpd ďđčíňĺđ, ňđ˙áâŕ\n"
-"äŕ ďđĺäîńňŕâčňĺ čěĺíŕňŕ íŕ őîńňŕ íŕ ďđčíňĺđíč˙ ńúđâúđ č\n"
-"čěĺňî íŕ ďđčíňĺđŕ íŕ ňîçč ńúđâúđ."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Čěĺ íŕ îňäŕëĺ÷ĺí őîńň"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Čěĺ íŕ îňäŕëĺ÷ĺí ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Ëčďńâŕ čěĺ íŕ čěĺ íŕ őîńň !"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Ëčďńâŕ čěĺ íŕ îňäŕëĺ÷ĺí ďđčíňĺđ !"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Íŕńňđîéęč íŕ SMB (Windows 9x/NT) ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Çŕ äŕ ďĺ÷ŕňŕňĺ íŕ SMB ďđčíňĺđ, ňđ˙áâŕ äŕ äŕäĺňĺ čěĺňî\n"
-"íŕ SMB őîńňŕ (Çŕáĺëĺćęŕ ! Ňî ěîćĺ äŕ ĺ đŕçëč÷íî îň TCP/IP őîńňŕ !)\n"
-"č âúçěîćíî IP ŕäđĺńŕ íŕ ďđčíňĺđńęč˙ ńúđâúđ, ęŕęňî č îáůîňî čěĺ íŕ\n"
-"ďđčíňĺđŕ, äî ęîéňî čńęŕňĺ äîńňúď č ďîäőîä˙ůî čěĺí, ďŕđîëŕ č číôîđěŕöč˙\n"
-"çŕ đŕáîňíŕňŕ ăđóďŕ."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Őîńň íŕ SMB ńúđâúđ"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP íŕ SMB ńúđâúđ:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Îáůî čěĺ"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Đŕáîňíŕ ăđóďŕ"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ňđ˙áâŕ äŕ áúäŕň çŕäŕäĺíč č čěĺňî č IP ŕäđĺńŕ íŕ ńúđâúđŕ !"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Ëčďńâŕ čěĺ íŕ SAMBA share !"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Îďöčč çŕ NetWare ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Çŕ äŕ ďĺ÷ŕňčňĺ íŕ NetWare ďđčíňĺđ ,ňđ˙áâŕ äŕ çíŕĺňĺ čěĺî ěó č âúçěîćíî\n"
-"ŕäđĺńŕ íŕ ńúđâúđŕ, ęŕęňî č čěĺňî íŕ îďŕřęŕňŕ,ďîňđĺáčňĺëńęîňî čěĺ,ďŕđîëŕ."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Ńúđâúđ íŕ ďđčíňĺđŕ"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Čěĺ íŕ ďĺ÷ŕňíŕňŕ îďŕřęŕňŕ"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Ëčďńâŕ čěĺ íŕ NCP ńúđâúđ !"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Ëčďńâŕ čěĺ íŕ NCP îďŕřęŕ !"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Îďöčč íŕ Socket ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Çŕ äŕ ďĺ÷ŕňŕňĺ íŕ socket ďđčíňĺđ, ňđ˙áâŕ äŕ ďđĺäîńňŕâčňĺ\n"
-"čěĺňî íŕ őîńňŕ íŕ ďđčíňĺđŕ č, ĺâĺíňóŕëíî, íîěĺđ íŕ ďîđň.\n"
-"Íŕ HP JetDirect ńúđâúđč, íîěĺđúň íŕ ďîđňŕ îáčęíîâĺííî ĺ 9100,\n"
-"íŕ äđóăč ńúđâúđč ěîćĺ äŕ âŕđčđŕ. Âčćňĺ đúęîâîńňâîňî íŕ\n"
-"őŕđäóĺđŕ ńč."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Čěĺ íŕ őîńň íŕ ďđčíňĺđŕ"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Ëčďńâŕ čěĺ íŕ őîńň íŕ ďđčíňĺđa !"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Ďĺ÷ŕňŕůî óńňđîéńňâî URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Ňđ˙áâŕ äčđĺęňíî äŕ îďđĺäĺëčňĺ URI çŕ äîńňúď äî ďđčíňĺđŕ. URI ňđ˙áâŕ äŕ "
-"čçďúëíč čëč CUPS čëč Foomatic ńďĺöčôčęŕöččňĺ. Îňáĺëĺćĺňĺ, ÷ĺ íĺ âńč÷ęč "
-"ňčďîâĺ URI ńĺ ďîääđúđćŕň îň spooler-čňĺ."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Ňđ˙áâŕ äŕ áúäĺ âúâĺäĺí âŕëčäĺí URI !"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Âńĺęč ďđčíňĺđ ńĺ íóćäŕĺ îň čěĺ (íŕďđčěĺđ lp).\n"
-"Ďîëĺňŕňŕ Îďčńŕíčĺ č Ěĺńňîďîëîćĺ íĺ ňđ˙áâŕ äŕ áúäŕň\n"
-"ďîďúëâŕíč. Čěŕ ęîěĺíňŕđč çŕ ďîňđĺáčňĺëčňĺ."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Čěĺ íŕ ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Îďčńŕíčĺ"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ěĺńňîďîëîćĺíčĺ"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Ďîäăîňâ˙íĺ íŕ áŕçŕňŕ äŕííč îň ďđčíňĺđč ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Čěĺ íŕ îňäŕëĺ÷ĺí ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Âńč÷ęî ďđŕâčëíî ëč ĺ ?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Čěĺ íŕ îňäŕëĺ÷ĺí ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Čçáîđ ěîäĺë íŕ ďđčíňĺđŕ"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Ęŕęúâ ěîäĺë ďđčíňĺđ čěŕňĺ ?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Íŕńňđîéęč íŕ OKI Winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Íŕńňđîéęŕ íŕ Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-#, fuzzy
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet ďđčíňĺđíčňĺ äđŕéâĺđč ďđĺäîńňŕâĺíč îň Lexmark ďîääúđćŕň\n"
-"ńŕěî ëîęŕëíč ďđčíňĺđč, áĺç ďđčíňĺđč íŕ îňäŕëĺ÷ĺíč ěŕřčíč čëč\n"
-"ďđčíňĺđíč ěŕřčíč. Ěîë˙, ńâúđćĺňĺ ďđčíňĺđŕ ńč íŕ ëîęŕëĺí ďîđň\n"
-"čëč ăî íŕńňđîéňĺ íŕ ěŕřčíŕňŕ, ęúě ęî˙ňî ĺ ńâúđçŕí."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-#, fuzzy
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Íŕńňđîéęč íŕ ďđčíňĺđŕ ďî ďîäđŕçáčđŕíĺ\n"
-"Ňđ˙áâŕ äŕ ńňĺ ńčăóđíč, ÷ĺ ăîëĺěčíŕňŕ íŕ ńňđŕíčöŕňŕ\n"
-"č ňčďŕ íŕ ěŕńňčëîňî (ŕęî čěŕ) ńŕ íŕńňđîĺíč ďđŕâčëíî.\n"
-"Îňáĺëĺćĺňĺ, ÷ĺ ďđč ěíîăî âčńîęî ęŕ÷ĺńňî íŕ čçőîäŕ íŕ\n"
-"ďđčíňĺđŕ, ňîé ěîćĺ çíŕ÷čňĺëíî äŕ ńĺ çŕáŕâč."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Íŕńňđîéęŕňŕ %s ňđ˙áâŕ äŕ ĺ ö˙ëî ÷čńëî !"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Íŕńňđîéęŕňŕ %s ňđ˙áâŕ äŕ ĺ ÷čńëî !"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Îďöč˙ňŕ %s ĺ čçâúí ăđŕíčöčňĺ !"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Čńęŕňĺ ëč äŕ íŕńňđîčňĺ ňîçč ďđčíňĺđ (\"%s\")\n"
-"ęŕňî ďđčíňĺđ ďî ďîäđŕçáčđŕíĺ ?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Ňĺńňîâč ńňđŕíčöč"
-
-#: ../../printerdrake.pm_.c:1583
-#, fuzzy
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Ěîë˙, čçáĺđĺňĺ ňĺńňîâŕ ńňđŕíčöŕ çŕ ďĺ÷ŕň.\n"
-"Çŕáĺëĺćęŕ: ňĺńňîâŕňŕ ńňđŕíčöŕ çŕ ńíčěęŕ ěîćĺ äŕ îňíĺěĺ äîńňŕ äúëăî\n"
-"âđĺěĺ äŕ ńĺ čçďĺ÷ŕňŕ č íŕ ëŕçĺđíč ďđčíňĺđč ń ěŕëęî ďŕěĺň ěîćĺ âúîáůĺ\n"
-"äŕ íĺ čçëĺçĺ.  ďîâĺ÷ĺňî ńëó÷ŕč ĺ äîńňŕňú÷íŕ ńňŕíäŕđňíŕ ňĺńňîâŕ ńňđŕíčöŕ."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Áĺç ňĺńňîâč ńňđŕíčöč"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Ďĺ÷ŕň"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Ńňŕíäŕđňíŕ ňĺńňîâŕ ńňđŕíčöŕ"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Ŕëňĺđíŕňčâíŕ ňĺńňîâŕ ńňđŕíčöŕ (Ďčńěî)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Ŕëňĺđíŕňčâíŕ ňĺńňîâŕ ńňđŕíčöŕ (Ŕ4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Ňĺńňîâŕ ńňđŕíčöŕ ńúń ńíčěęŕ"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Îňďĺ÷ŕňâŕíĺ íŕ ňĺńňîâč ńňđŕíčöč"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Îňďĺ÷ŕňâŕíĺ íŕ ňĺńňîâ(ŕňŕ/čňĺ) ńňđŕíčö(ŕ/č) ..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Ňĺńňîâčňĺ ńňđŕíčöč ńŕ čçďđŕňĺíč ęúě ďđčíňĺđŕ.\n"
-"Ěîćĺ äŕ îňíĺěĺ ěŕëęî âđĺěĺ ďđĺäč ďđčíňĺđŕ äŕ çŕďî÷íĺ.\n"
-"Ńúńňî˙íčĺ íŕ ďĺ÷ŕňŕ:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Ňĺńňîâčňĺ ńňđŕíčöč ńŕ čçďđŕňĺíč ęúě ďđčíňĺđíŕ.\n"
-"Ěîćĺ äŕ îňíĺěĺ ěŕëęî âđĺěĺ ďđĺäč ďđčíňĺđŕ äŕ çŕďî÷íĺ.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Ďđîđŕáîňč ëč ęŕęňî ňđ˙áâŕ ?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Çŕ äŕ čçďĺ÷ŕňŕňĺ ôŕéë îň ęîěŕíäíč˙ đĺä (ňĺđěčíŕëĺí ďđîçîđĺö), ěîćĺňĺ čëč äŕ "
-"čçďîëçâŕňĺ ęîěŕíäŕňŕ \"%s <file>\" čëč ăđŕôč÷íč˙ ďĺ÷ŕňŕů číńňđóěĺíň: \"xpp "
-"<file>\" čëč \"kprinter <file>\". Ăđŕôč÷íčňĺ číńňđóěĺíňč âč ďîçâîë˙âŕň äŕ "
-"čçáčđŕňĺ ďđčíňĺđŕ č äŕ ďîďđŕâ˙ňĺ ëĺńíî íŕńňđîéęčňĺ íŕ îďöččňĺ.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ěîćĺňĺ äŕ čçďîëçâŕňĺ ňŕçč ęîěŕíäŕ č â ďîëĺňî \"Ęîěŕíäŕ çŕ ďĺ÷ŕň\" íŕ "
-"ďĺ÷ŕňíčňĺ äčŕëîçč â ěíîƒî ďđčëîćĺíč˙. Íî ň˘ę íĺ ďîńňŕâ˙éňĺ čěĺňî íŕ ôŕéëŕ, "
-"çŕůîňî ňî ńĺ ďîäŕâŕ îň ďđčëîćĺíčĺňî.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Ęîěŕíäŕňŕ \"%s\" ńúůî ňŕęŕ âč ďîçâîë˙âŕ äŕ ďîďđŕâčňĺ íŕńňđîéęčňĺ íŕ îďöččňĺ "
-"çŕ îďđĺäĺëĺíŕ đŕáîňŕ íŕ ďđčíňĺđŕ. Ďđîńňî äîáŕâĺňĺ öĺëŕíčňĺ íŕńňđîéęč ęúě "
-"ęîěŕíäíč˙ đĺä, íŕďđ. \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Çŕ äŕ âčäčňĺ ńďčńúę íŕ äîńňúďíčňĺ îďöčč çŕ ňĺęóůč˙ ďđčíňĺđ, čëč ďđî÷ĺňĺňĺ "
-"ńďčńúęŕ ďîęŕçŕí ďî-äîëó čëč öúęíĺňĺ íŕ áóňîíŕ \"Ńďčńúę ń îďöčč çŕ ďĺ÷ŕň\".\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Çŕ äŕ čçďĺ÷ŕňŕňĺ ôŕéë îň ęîěŕíäíč˙ đĺä (ňĺđěčíŕëĺí ďđîçîđĺö) čçďîëçâŕéňĺ "
-"ęîěŕíäŕňŕ \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ěîćĺňĺ äŕ čçďîëçâŕňĺ ňŕçč ęîěŕíäŕ č â ďîëĺňî \"Ęîěŕíäŕ çŕ ďĺ÷ŕň\" íŕ "
-"ďĺ÷ŕňíčňĺ äčŕëîçč â ěíîăî ďđčëîćĺíč˙. Íî ňóę íĺ ďîńňŕâ˙éňĺ čěĺňî íŕ ôŕéëŕ, "
-"çŕůîňî ňî ńĺ ďîäŕâŕ îň ďđčëîćĺíčĺňî.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-#, fuzzy
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Çŕ äŕ âčäčňĺ ńďčńúę ń äîńňúďíčňĺ îďöčč çŕ ňĺęóůč˙ ďđčíňĺđ, öúęíĺňĺ íŕ áóňîíŕ "
-"\"Ńďčńúę ń îďöčč çŕ ďĺ÷ŕň\".\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Çŕ äŕ îňďĺ÷ŕňŕňĺ ôŕéë îň ęîěŕíäíč˙ đĺä (ňĺđěčíŕëĺí ďđîçîđĺö), čçďîëçâŕéňĺ "
-"ęîěŕíäŕňŕ \"%s <file>\" čëč \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Ęîěŕíäčňĺ \"%s\" č \"%s\" ńúůî ňŕęŕ ďîçâîë˙âŕň äŕ ďîďđŕâ˙ňĺ čçáđŕíčňĺ "
-"íŕńňđîéęč çŕ îďđĺäĺëĺíŕ đŕáîňŕ íŕ ďđčíňĺđŕ. Ďđîńňî äîáŕâĺňĺ čńęŕíčňĺ "
-"íŕńňđîéęč ęúě ęîěŕíäíč˙ đĺä, íŕďđ. \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Çŕňâîđč"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ďĺ÷ŕňŕíĺ íŕ ďđčíňĺđ \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ďĺ÷ŕňŕíĺ íŕ ďđčíňĺđ \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Ńďčńúę ń ďđčíňĺđíč îďöčč"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "×ĺňĺíĺ íŕ äŕííč îň ďđčíňĺđŕ ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Ďđĺíîń íŕ íŕńňđîéęŕ íŕ ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:1815
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Ěîćĺňĺ äŕ ęîďčđŕňĺ íŕńňđîéęčňĺ íŕ ďđčíňĺđŕ, ęîčňî ńňĺ čçâúđřčëč\n"
-"çŕ spoller %s íŕ %s, ňĺęóůč˙ spooler. Ö˙ëŕňŕ číôîđěŕöč˙ çŕ íŕńňđîéęčňĺ\n"
-"(čěĺ íĺ ďđčíňĺđ, îďčńŕíčĺ, ěĺńňîďîëîćĺíčĺ, âčä íŕ âđúçęŕňŕ č\n"
-"íŕńňđîéęč ďî ďîäđŕçáčđŕíĺ) ńĺ ďđĺçŕďčńâŕň, íî đŕáîňčňĺ íĺ ńĺ\n"
-"ďđĺőâúđë˙ň.\n"
-"Íĺ âńč÷ęč îďŕřęč ěîăŕň äŕ áúäŕň ďđĺőâúđëĺíč ďî ńëĺäíčňĺ ďđč÷číč:\n"
-
-#: ../../printerdrake.pm_.c:1818
-#, fuzzy
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS íĺ ďîääúđćŕ ďđčíňĺđč íŕ Novell ńúđâúđč čëč ďđčíňĺđč\n"
-"čçďđŕůŕůč äŕííč âúâ ńâîáîäíî-čçăđŕäĺíŕ ęîěŕíäŕ.\n"
-
-#: ../../printerdrake.pm_.c:1820
-#, fuzzy
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ďîääúđćŕ ńŕěî ëîęŕëíč ďđčíňĺđč, îňäŕëĺ÷ĺíč LPD ďđčíňĺđč\n"
-"č Socket/TCP ďđčíňĺđč.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD č LPRng íĺ ďîääúđćŕ IPP ďđčíňĺđč.\n"
-
-#: ../../printerdrake.pm_.c:1824
-#, fuzzy
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Ęŕňî äîďúëíĺíčĺ, îďŕřęčňĺ íĺ ńúçäŕäĺíč ń ňŕçč ďđîăđŕěŕ\n"
-"čëč \"foomatic-configure\" íĺ ěîăŕň äŕ áúäŕň ďđĺőâúđë˙íč."
-
-#: ../../printerdrake.pm_.c:1825
-#, fuzzy
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Ńúůî ňŕęŕ, ďđčíňĺđč íŕńňđîĺíč ń PPD ôŕéëîâĺ ďđĺäîńňŕâĺíč\n"
-"îň ďđîčçâîäčňĺëčňĺ čě čëč ń îđčăčíŕëíč CUPS äđŕéâĺđč íĺ\n"
-"ěîăŕň äŕ áúäŕň ďđĺőâúđë˙íč."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Îňáĺëĺćĺňĺ ďđčíňĺđčňĺ, ęîčňî čńęŕňĺ äŕ ďđĺőâúđëčňĺ č öúęíĺňĺ\n"
-"\"Ďđĺőâúđëč\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Íĺ ďđĺőâúđë˙é ďđčíňĺđč"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Ďđĺőâúđëč"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ďđčíňĺđ ń čěĺ \"%s\" âĺ÷ĺ ńúůĺńňâóâŕ â %s.\n"
-"Öúęíĺňĺ \"Ďđĺőâúđëč\", çŕ äŕ ăî ďđĺçŕďčřĺňĺ.\n"
-"Ěîćĺňĺ ńúůî ňŕęŕ äŕ íŕďčřĺňĺ íîâî čěĺ čëč äŕ ďđîďóńíňĺ ďđčíňĺđŕ."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Čěĺňî íŕ ďđčíňĺđŕ ňđ˙áâŕ äŕ ńúäúđćŕ ńŕěî áóęâč, ÷čńëŕ č ďîä÷ĺđňŕâęŕ"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Ďđčíňĺđúň \"%s\" âĺ÷ĺ ńúůĺńňâóâŕ,\n"
-"íŕčńňčíŕ ëč čńęŕňĺ äŕ ďđĺçŕďčřĺňĺ íŕńňđîéęŕňŕ ?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Íîâî čěĺ íŕ ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Ďđĺőâúđë˙íĺ íŕ %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, fuzzy, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Ďđĺőâúđëčëč ńňĺ ďđčíňĺđ ďî ďîäđŕçáčđŕíĺ (\"%s\"),\n"
-"Čńęŕňĺ ëč äŕ ăî îńňŕâčňĺ ďî ďîäđŕçáčđŕíĺ â íîâŕňŕ\n"
-"ďđčíňĺđíŕ ńčńňĺěŕ %s ?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Îďđĺńí˙âŕíĺ íŕ äŕííčňĺ îň ďđčíňĺđŕ ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Íŕńňđîéęŕ íŕ îňäŕëĺ÷ĺí ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Ńňŕđňčđŕíĺ ěđĺćŕňŕ ...."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Â ěîěĺíňŕ íŕńňđîéâŕě ěđĺćŕňŕ"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Ôóíęöčîíŕëíîńňňŕ íŕ ěđĺćŕňŕ íĺ ĺ íŕńňđîĺíŕ"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Ďđîäúëćč áĺç íŕńňîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-#, fuzzy
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Í˙ěŕřĺ äîńňúď äî ěđĺćŕňŕ č ňŕęúâ íĺ ěîćĺřĺ äŕ áúäĺ\n"
-"óńňŕíîâĺí. Ěîë˙, ďđîâĺđĺňĺ íŕńňđîéęŕňŕ č őŕđäóĺđŕ\n"
-"ńč. Ňîăŕâŕ îďčňŕéňĺ äŕ íŕńňđîčňĺ îňäŕëĺ÷ĺíč˙ ďđčíňĺđ\n"
-"îňíîâî."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Đĺńňŕđňčđŕíĺ íŕ ďđčíňĺđíŕňŕ ńčńňĺěŕ"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "âčńîęî"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "ďŕđŕíîč÷íî"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Číńňŕëčđŕíĺ íŕ ďđčíňĺđíŕňŕ ńčńňĺěŕ â %s íčâî íŕ ńčăóđíîńň"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Ńňŕđňčđŕíĺ íŕ ďđčíňĺđíŕňŕ ńčńňĺěŕ ďđč ńňŕđňčđŕíĺ"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Ďđîâĺđęŕ íŕ číńňŕëčđŕíč˙ ńîôňóĺđ..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Čçňđčâŕíĺ íŕ LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Čçňđčâŕíĺ íŕ LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Čçáĺđĺňĺ ďđčíňĺđĺí spooler"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Ęî˙ ďđčíňĺđíŕ ńčńňĺěŕ (spooler) čçęŕňĺ äŕ čçďîëçâŕňĺ ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Íŕńňđîéęŕ íŕ ďđčíňĺđŕ \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Číńňŕëčđŕíĺ íŕ ďŕęĺňč ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Îďöčč íŕ ďđčíňĺđŕ"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Ďîäăîňâ˙íĺ íŕ PinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Íŕńňđîéęŕ íŕ ďđčíňĺđŕ \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Čńęŕňĺ ëč äŕ íŕńňđîčňĺ ďĺ÷ŕňŕ ?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Ďĺ÷ŕňíŕ ńčńňĺěŕ: "
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Ńëĺäíčňĺ ďđčíňĺđč ńŕ íŕńňđîĺíč.\n"
-"Öúęíĺňĺ íŕ ĺäčí îň ň˙ő, çŕ äŕ ăî đĺäŕęňčđŕňĺ\n"
-"čëč çŕ äŕ ďîëó÷čňĺ číôîđěŕöč˙ çŕ íĺăî, čëč\n"
-"âúđőó \"Äîáŕâč Ďđčíňĺđ\", çŕ äŕ äîáŕâčňĺ íîâ ďđčíňĺđ."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Ńëĺäíčňĺ ďđčíňĺđč ńŕ íŕńňđîĺíč.\n"
-"Öúęíĺňĺ íŕ ĺäčí îň ň˙ő, çŕ äŕ ăî đĺäŕęňčđŕňĺ\n"
-"čëč çŕ äŕ ďîëó÷čňĺ číôîđěŕöč˙ çŕ íĺăî, čëč\n"
-"âúđőó \"Äîáŕâč Ďđčíňĺđ\", çŕ äŕ äîáŕâčňĺ íîâ ďđčíňĺđ."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Íŕńňîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Íîđěŕëĺí đĺćčě"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Čńęŕňĺ ëč äŕ íŕńňđîčňĺ äđóă ďđčíňĺđ ?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Ďîďđŕâč íŕńňđîéęčňĺ íŕ ďđčíňĺđ"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Ďđčíňĺđ %s: %s %s\n"
-"Ęŕęâî čńęŕňĺ äŕ ďîďđŕâčňĺ ďî ňîçč ďđčíňĺđ ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Äŕâŕé !"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Ňčď íŕ âđúçęŕňŕ ęúě ďđčíňĺđŕ"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Čěĺ íŕ ďđčíňĺđŕ, îďčńŕíčĺ, ěĺńňîďîëîćĺíčĺ"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Ďđîčçâîäčňĺë íŕ ďđčíňĺđŕ, ěîäĺë, äđŕéâĺđ"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Ďđîčçâîäčňĺë íŕ ďđčíňĺđŕ, ěîäĺë"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Îďđĺäĺëč ňîçč ďđčíňĺđ çŕ ďîëçâŕíĺ ďî ďîäđŕçáčđŕíĺ"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Îňďĺ÷ŕňâŕíĺ íŕ ňĺńňîâč ńňđŕíčöč"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Čńęŕňĺ ëč äŕ íŕńňđîčňĺ äđóă ďđčíňĺđ ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Ďđĺěŕőâŕíĺ íŕ ďđčíňĺđŕ"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Čçňđčâŕíĺ íŕ ńňŕđ ďđčíňĺđ \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Ďđčíňĺđ ďî ďîäđŕçáčđŕíĺ"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Ďđčíňĺđúň \"%s\" âĺ÷ĺ ĺ îďđĺäĺëĺí çŕ ďîëçâŕíĺ ďî ďîäđŕçáčđŕíĺ."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Íŕčńňčíŕ ëč čńęŕňĺ äŕ ďđĺěŕőíĺňĺ ďđčíňĺđŕ \"%s\" ?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Čçňđčâŕíĺ íŕ ďđčíňĺđŕ \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy íŕńňđîéęŕ"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Äîáđĺ äîřëč â íŕńňđîéęŕňŕ íŕ Proxy.\n"
-"\n"
-"Ňóę ůĺ ěîćĺňĺ äŕ óńňŕíîâčňĺ âŕřčňĺ HTTP č FTP proxy\n"
-"ńúń čëč áĺç ďîňđĺáčňĺëńęî čěĺ č ďŕđîëŕ\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Ěîë˙, ďîďúëíĺňĺ číôîđěŕöč˙ňŕ çŕ HTTP proxy.\n"
-"Îńňŕâĺňĺ ďđŕçíî, ŕęî íĺ čńęŕňĺ HTTP proxy."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ďîđň"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL ňđ˙áâŕ äŕ ĺ çŕďî÷âŕ ń 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Íîěĺđúň íŕ ďîđň ňđ˙áâŕ äŕ ĺ öčôđŕ"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Ěîë˙, ďîďúëíĺňĺ číôîđěŕöč˙ňŕ çŕ FTP proxy.\n"
-"Îńňŕâĺňĺ ďđŕçíî, ŕęî íĺ čńęŕňĺ FTP proxy."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL ňđ˙áâŕ äŕ çŕďî÷âŕ ń 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Ěîë˙, âúâĺäĺňĺ čěĺ č ďŕđîëŕ çŕ proxy, ŕęî čěŕ.\n"
-"Îńňŕâĺňĺ ďđŕçíî, ŕęî íĺ čńęŕňĺ čěĺ/ďŕđîëŕ"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "ďîňđĺáčňĺëńęî čěĺ"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ďŕđîëŕ"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "îůĺ âĺäíúć ďŕđîëŕ"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Ďŕđîëčňĺ íŕ ńúâďŕäŕň. Îďčňŕéňĺ ďŕę !"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Íĺ ěîăŕ äŕ ďđčáŕâ˙ ä˙ë ęúě _ôîđěŕňčđŕí_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ôŕéëúň %s íĺ ěîćĺ äŕ áúäĺ çŕďčńŕí"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ďđîďŕäíŕ"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ďđîďŕäíŕ (ěîćĺ áč raidtools ëčďńâŕň ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Í˙ěŕ äîńňŕňú÷íî ä˙ëîâĺ çŕ RAID íčâî %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ďóńíč ALSA (Advanced Linux Sound Architecture) çâóęîâŕňŕ ńčńňĺěŕ"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacrton - ďĺđčîäč÷íî čçďúëí˙âŕíĺ íŕ ęîěŕíäč ďî đŕçďčńŕíčĺ."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd ńĺ čçďîëçâŕ çŕ íŕáëţäĺíčĺ íŕ áŕňĺđč˙ňŕ č çŕďčńâŕéęč ńňŕňóńŕ ÷đĺç\n"
-"syslog. Ěîćĺ ńúůî äŕ ńĺ čçďîëçâŕ çŕ ńďčđŕíĺ íŕ ěŕřčíŕňŕ, ęîăŕňî áŕňĺđč˙ňŕ ĺ "
-"čçňîůĺíŕ."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ďóńęŕ ęîěŕíäč ďî đŕçďčńŕíčĺ âúâ âđĺěĺ îďđĺäĺëĺíî îň ęîěŕíäŕňŕ at č ďóńęŕ\n"
-"íŕáîđ îň äđóăč, ęîăŕňî íŕňîâŕđĺíîńňňŕ ńďŕäíĺ äîńňŕňú÷íî."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron ĺ ńňŕíäŕđňíŕ UNIX ďđîăđŕěŕ, ęî˙ňî ďĺđčîäč÷íî ďóńęŕ îďđĺäĺëĺíč ďđîăđŕěč\n"
-"ďî đŕçďčńŕíčĺ. vixie cron äîáŕâ˙ ěíîćĺńňâî ďđĺčěóůĺńňâŕ íŕä ňĺçč íŕ ďđîńňč˙\n"
-"UNIX cron, âęëţ÷čňĺëíî ďî-äîáđŕ ńčăóđíîńň č ěîůíč íŕńňđîéâŕůč îďöčč."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM äîáŕâ˙ ďîääđúćęŕ íŕ ěčřęŕ â ňĺęńňîâî-áŕçčđŕíčňĺ Linux ďđčëîćĺíč˙ ęŕňî\n"
-"Midnight Commander. Ńúůî ňŕęŕ ďîçâîë˙âŕ áŕçčđŕíčňĺ íŕ ěčřęŕ ęîíçîëč\n"
-"đĺćč-č-ëĺďč îďĺđŕöčč, č âęëţ÷âŕ ďîääđúćęŕ íŕ čçęŕ÷ŕůč ěĺíţňŕ íŕ ęîçîëŕňŕ."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ďđŕâč ďđîáč íŕ őŕđäóĺđŕ, č ĺâĺíňóŕëíî íŕńňđîéâŕ\n"
-"íîâ/ďđîěĺíĺí őŕđäóĺđ."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ĺ World Wide Web (WWW) ńúđâúđ. Ňîé ńëóćč äŕ îáđŕáîňâŕ íŕ HTML "
-"ôŕéëîâĺ\n"
-"č CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (÷ĺńňî íŕđč÷ŕí inetd) ďóńęŕ đŕçëč÷íč äđóăč\n"
-"Číňĺđíĺň óńëóăč. Ňîé îňăîâŕđ˙ çŕ ďóńęŕíĺňî íŕ ěíîăî óńëóăč îň đîäŕ íŕ\n"
-"telnet, ftp, rsh č rlogin. Čçęëţ÷âŕíĺňî íŕ inetd čçęëţ÷âŕ âńč÷ęč óńëóăč,\n"
-"çŕ ęîčňî îňăîâŕđ˙."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Âęëţ÷č ôčëňđčđŕíĺňî íŕ ďŕęĺňč çŕ Linux ˙äđŕ ńĺđč˙ 2.2, çŕ\n"
-"íŕńňđîęŕ íŕ çŕůčňíŕňŕ ńňĺíŕ, s cel çŕůčňŕâŕ íŕ ěŕřčíŕňŕ âč îň\n"
-"ěđĺćîâč ŕňŕęč."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ňîçč ďŕęĺň çŕđĺćäŕ ěŕđęčđŕíŕňŕ ęëŕâčŕňóđíŕ íŕđĺäáŕ â /etc/sysconfig/"
-"keyboard.\n"
-"Ň˙ ěîćĺ äŕ áúäĺ čçáđŕíŕ ń číńňđóěĺíňŕ kbdconfig. Ňđ˙áâŕ äŕ îńňŕâčňĺ "
-"ňîâŕâęëţ÷ĺíî çŕ ďîâĺ÷ĺňî ěŕřčíč."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Ŕâňîěŕňč÷íî đĺăĺíĺđčđŕíĺ íŕ header-čňĺ íŕ ŕäđîňî, â /boot çŕ\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Ŕâňîěŕňč÷íî çŕńč÷ŕíĺ č íŕńňđîéęŕ íŕ őŕđäóĺđŕ ďđč ńňŕđňčđŕíĺ."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf ďîí˙ęîăŕ óđĺćäŕ čçâúđřâŕíĺňî íŕ đŕçëč÷íč çŕäŕ÷č\n"
-"ďđč ńňŕđňčđŕíĺ çŕ ďîääđúćęŕ íŕ ńčńňĺěíŕňŕ íŕńňđîéęŕ."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd ĺ äĺěîíŕ çŕ ďĺ÷ŕň íĺîáőîäčě íŕ lpr äŕ đŕáîňč íîđěŕëíî. Ňîé ďđîńňî ĺ\n"
-"ńúđâúđ, ęîéňî îďđĺäĺë˙ đŕáîňčňĺ çŕ ďĺ÷ŕň íŕ ďđčíňĺđ(ŕ/čňĺ)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server ńĺ čçďîëçâŕ çŕ čçăđŕćäŕíĺ íŕ âčńîęîďđîčçâîäčňĺëĺí\n"
-"č äîáđĺ äîńňúďĺí ńúđâúđ."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) ĺ Domain Name Server (DNS), ęîéňî ńĺ čçďîëçâŕ äŕ ďđĺâúđíĺ\n"
-"čěĺňî íŕ őîńňŕ äî IP ŕäđĺń."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ěîíňčđŕ č äĺěîíňčđŕ âń˙ęŕęâč Network File System (NFS), SMB (LAN\n"
-"Manager/Windows), č NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ŕęňčâčđŕ/äĺŕęňčâčđŕ âńč÷ęč ěđĺćîâč číňĺđôĺéńč, íŕńňđîĺíč äŕ ńĺ ďóńęŕň\n"
-"ďđč ńňŕđňčđŕíĺ íŕ ěŕřčíŕňŕ."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ĺ ďîďóë˙đĺí ďđîňîęîë çŕ îáěĺí íŕ ôŕéëîâĺ ďî TCP/IP ěđĺćč.\n"
-"Ňŕçč óńëóăŕ îńčăóđ˙âŕ ôóíęöčîíŕëíîńňňŕ íŕ NFS ńúđâúđŕ, ęîéňî ńĺ íŕńňđîéâŕ\n"
-"÷đĺç ôŕéëŕ /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ĺ ďîďóë˙đĺí ďđîňîęîë çŕ îáěĺí íŕ ôŕéëîâĺ ďî TCP/IP ěđĺćč.\n"
-"Ňŕçč óńëóăŕ îńčăóđ˙âŕ ôóíęöčîíŕëíîńňňŕ íŕ çŕęëţ÷âŕíĺňî íŕ NFS ôŕéëîâĺňĺ."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Ŕâňîěŕňč÷íî âęëţ÷âŕíĺ íŕ numlock ęëŕâčřŕ ďîä ęîíçîëŕ č\n"
-"XFree ďđč ńňŕđňčňŕíĺ."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ďîääđúćęŕ íŕ OKI 4w č ńúâěĺńňčěč win-ďđčíňĺđč."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA ďîääúđćęŕňŕ îáčęíîâĺííî ďîääúđćŕ íĺůŕ ęŕňî ethernet č ěîäĺěč â\n"
-"laptop-č. Ňîâŕ í˙ěŕ äŕ ńĺ ńňŕđňčđŕ ďđĺäč äŕ áúäĺ íŕńňđîĺí, ňŕęŕ ÷ĺ ĺ\n"
-"ďî-äîáđĺ äŕ ˙ čěŕňĺ číńňŕëčđŕíŕ íŕ ěŕřčíč, ęîčňî íĺ ńĺ íóćäŕ˙ň îň íĺ˙."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper ńĺ ńďđŕâ˙ ń RPC âđúçęč, ęîčňî ńĺ čçďîëçâŕň îň ďđîňîęîëč ęŕňî\n"
-"NFS č NIS. portmap ńúđâúđŕ ňđ˙áâŕ äŕ ĺ ďóńíŕň íŕ ěŕřčíč, ęîčňî đŕáîň˙ň ęŕňî\n"
-"ńúđâúđ çŕ ďđîňîęîëč, ęîčňî ńĺ íóćäŕ˙ň äŕ čçďîëçâŕň RPC ěĺőŕíčçúě."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ĺ Main Transport Agent (MTA), ęîéňî ĺ ďđîăđŕěŕ ęî˙ňî ďđĺíŕń˙\n"
-"ďîřŕ îň ěŕřčíŕ íŕ ěŕřčíŕ."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Çŕďŕçâŕ č âúçńňŕíîâ˙ňŕ ďîňîęŕ íŕ ńčńňĺěíŕ ĺíňđîďč˙ çŕ ďî-ăîë˙ěî ęŕ÷ĺńňâî\n"
-"íŕ ďđîčçâîëíî ăĺíĺđčđŕíĺ íŕ ÷čńëŕ."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Ńâúđćč ÷čńňč äđŕéâĺđč ń áëîęîâč óńňđîéńňâŕ (ęŕňî ä˙ëîâĺ\n"
-"íŕ ňâúđäč˙ äčńę), çŕ óďîňđĺá˙ňŕ îň ďđčëîćĺíč˙ ęŕňî Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"touted äĺěîíŕ ďîçâîë˙âŕ ňŕáëčöŕ çŕ IP đóňčđŕíĺ ŕâňîěŕňč÷íî îáíîâ˙âŕíŕ ÷đĺç\n"
-"RIP ďđîňîęîëŕ. Äîęŕňî RIP ĺ řčđîęî čçďîëçâŕíŕ çŕ ěŕëęč ěđĺćč, çŕ ďî-ńëîćíč\n"
-"ďđîňîęîëč çŕ đóňčđŕíĺ ńŕ íóćíč çŕ ńëîćíč ěđĺćč. "
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat ďđîňîęîëŕ ďîçâîë˙âŕ íŕ ěđĺćîâčňĺ ďîňđĺáčňĺëč äŕ čçâëč÷ŕň\n"
-"ďŕđŕěĺňđčňĺ íŕ âúçěîćíîńňčňĺ çŕ âń˙ęŕ ěŕřčíŕ íŕ ěđĺćŕňŕ."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers ďđîňîęîëŕ ďîçâîë˙âŕ íŕ ěđĺćîâčňĺ ďîňđĺáčňĺëč äŕ ďđîâĺđ˙âŕň ęîé ĺ\n"
-"âë˙çúë íŕ äđóăŕ îňăîâŕđ˙ůŕňŕ ěŕřčíŕ."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho ďđîňîęîëŕ ďîçâîë˙âŕ íŕ îňäŕëĺ÷ĺíč ďîňđĺáčňĺëč äŕ ńĺ ńäîáč˙ň ńúń ńďčńúę\n"
-"íŕ âńč÷ęč ďîňđĺáčňĺëč âëĺçëč íŕ ěŕřčíŕ ń đŕáîňĺů rwho äĺěîí (ďîäîáĺí íŕ "
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Ďóńíęŕíĺ çâóęîâŕňŕ ńčńňĺěŕ íŕ ěŕřčíŕňŕ âč"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog ĺ ďđîăđŕěŕ ęî˙ňî ěíîăî äĺěîíč čçďîëçâŕň äŕ çŕďŕçâŕň ńúîáůĺíč˙ â\n"
-"đŕçëč÷íč ńčńňĺěíč ôŕéëîâĺ (ëîăîâĺ). Äîáđĺ ĺ ďîńňî˙ííî äŕ ˙ čěŕňĺ đŕáîňĺůŕ."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Çŕđĺćäŕíĺ äđŕéâĺđč çŕ âŕřčňĺ USB óńňđîéńňâŕ."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Ńňŕđňčđŕ X Font Server (ňîâŕ ĺ çŕäúëćčňĺëíî, çŕ äŕ ňđúăíĺ XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Čçáčđŕ óńëóăčňĺ, ęîčňî ňđ˙áâŕ äŕ ńĺ ďóńíŕň ďđč ďóńęŕíĺ íŕ ěŕřčíŕňŕ"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Ďĺ÷ŕňŕíĺ"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Číňĺđíĺň"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Ďîäĺë˙íĺ íŕ ôŕéëîâĺ"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Ńčńňĺěŕ"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Îňäŕëĺ÷ĺíŕ ŕäěčíčńňđŕöč˙"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Ńúđâúđ Áŕçč-äŕííč"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Óńëóăč: %d ŕęňčâčđŕíč îň %d đĺăčńňđčđŕíč"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Óńëóăč"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ńňŕđňčđŕíĺ"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ńďđ˙íŕ"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Óńëóčăč č äĺěîíč"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Í˙ěŕ äîďúëíčňĺëíŕ číôîđěŕöč˙\n"
-"çŕ ňŕçč óńëóăŕ, ńúćĺë˙âŕě."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ďđč çŕđĺćäŕíĺ"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Ńúńňî˙íčĺ"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Ńĺęňîđ"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Ďđîňîęîë çŕ îńňŕíŕëč˙ ńâ˙ň"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Číňĺđíĺň äîńňúď"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Ěóëňčěĺäč˙ - Ăđŕôčęŕ"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Đŕçđŕáîňęŕ"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Ęîíňđîëĺí öĺíňúđ"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Ěđĺćîâ číňĺđôĺéń"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Őîńň íŕ SMB ńúđâúđ"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Čăđč"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Ĺęńďĺđňíŕ"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "çŕäúëćčňĺëĺí"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Číńňŕëčđŕíĺ íŕ ďŕęĺňč ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Íĺ ěîăŕ äŕ đŕç÷ĺňŕ ňŕáëčöŕňŕ íŕ ä˙ëîâĺňĺ, ďđĺęŕëĺíî ĺ ďîâđĺäĺíŕ :(\n"
-"Ůĺ ńĺ îďčňŕě äŕ ďđîäúëćŕ äŕ đŕç÷čńňâŕě ëîřčňĺ ä˙ëîâĺ"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Ăđĺřęŕ !"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Íĺ ěîăŕ äŕ íŕěĺđ˙ íóćíŕ ęŕđňčíęŕ `%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Íŕńňđîé÷čę íŕ ŕâňîěŕňč÷íŕ čńíňŕëŕöč˙"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Íŕńňđîéęŕ íŕ ŕâňîěŕňč÷íčňĺ ńňúďęč"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Ěîë˙, čçáĺđĺňĺ çŕ âń˙ęŕ ńňúďęŕ, äŕëč ůĺ ńĺ ďđĺčăđŕĺ ęŕňî ďđč číńňŕëŕöč˙ňŕ, "
-"čëč ůĺ áúäĺ đú÷íŕ"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Ďîçäđŕâëĺíč˙ !"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Äčńęĺňŕňŕ ĺ óńďĺříî ńúçäŕäĺíŕ.\n"
-"Ńĺăŕ ěîćĺňĺ äŕ ďđĺčăđŕĺňĺ číńňŕëŕöč˙ňŕ."
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Číńňŕëčđŕé"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Äîáŕâ˙íĺ íŕ ďîňđĺáčňĺë"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Äŕ ďđĺěŕőíŕ ëč loopback ôŕéëŕ ?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Čçáîđ íŕ ďŕęĺňč"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Ěîë˙, čçáĺđĺňĺ ďŕęĺňčňĺ, ęîčňî čńęŕňĺ äŕ číńňŕëčđŕňĺ."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Čçňđčâŕíĺ íŕ îďŕřęŕňŕ"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Ďđĺěŕőíč Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Ďîňđĺáčňĺëńęî čěĺ"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Ěîë˙, ďđîáâŕéňĺ ěčřęŕňŕ ńč"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Ěîë˙, îďčňŕéňĺ îňíîâî"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Ěîë˙, îďčňŕéňĺ îňíîâî"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "îůĺ âĺäíúć ďŕđîëŕ"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN âđúçęŕ"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Čçáĺđĺňĺ âđúçęŕ ęúě ďđčíňĺđŕ"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Ěîë˙, čçáĺđĺňĺ ďîäđĺćäŕíĺ íŕ ęëŕâčŕňóđŕňŕ."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Ěîë˙, öúęíĺňĺ íŕ íîńčňĺë˙"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Ěîë˙, čçáĺđĺňĺ ďŕęĺňčňĺ, ęîčňî čńęŕňĺ äŕ číńňŕëčđŕňĺ."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Ěîë˙, ďđîáâŕéňĺ ěčřęŕňŕ ńč"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Ěđĺćîâ číňĺđôĺéń"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Ďîňđĺáčňĺëńęî čěĺ"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Ěîë˙, čçáĺđĺňĺ ďŕęĺňčňĺ, ęîčňî čńęŕňĺ äŕ číńňŕëčđŕňĺ."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Ěîë˙, čçáĺđĺňĺ čçďîëçâŕí ĺçčę."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Čńęŕňĺ ëč îďňčěčçŕöč˙ íŕ äčńęîâĺňĺ ?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Čńęŕňĺ ëč îďňčěčçŕöč˙ íŕ äčńęîâĺňĺ ?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Ĺäčí ěîěĺíň"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Wheel"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Wheel"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Îďöčč íŕ ěîäóëŕ:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Íŕńňđîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Ěîë˙, čçáĺđĺňĺ ďŕęĺňčňĺ, ęîčňî čńęŕňĺ äŕ číńňŕëčđŕňĺ."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Ěîë˙, čçáĺđĺňĺ ďŕęĺňčňĺ, ęîčňî čńęŕňĺ äŕ číńňŕëčđŕňĺ."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Ôŕéëîâč ńčńňĺěč"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Îďöčč"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Ěîë˙, čçáĺđĺňĺ ńĺđčĺí ďîđň ęúě ęîéňî ńâúđçŕí ěîäĺěúň âč."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Íŕńňđîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Ěîë˙, čçáĺđĺňĺ ňčď íŕ ěčřęŕňŕ."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Âúçńňŕíîâč îň äčńęĺňŕ"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Ěîë˙, čçáĺđĺňĺ ňčď íŕ ěčřęŕňŕ."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Äđóăŕ"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Číńňŕëčđŕíĺ íŕ ńčńňĺěŕňŕ"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Âúçńňŕíîâč îň ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Âúçńňŕíîâč îň ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Ęëčĺíňńęŕ"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Ďîěîů"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Ďđĺäčřĺí"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Ńúńňî˙íčĺ"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Âúçńňŕíîâč îň ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Ňĺęńň"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Ďŕęĺňč çŕ číńňŕëčđŕíĺ"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Ěîë˙, čçáĺđĺňĺ čçďîëçâŕí ĺçčę."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Ěîë˙, čçáĺđĺňĺ čçďîëçâŕí ĺçčę."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Ěîë˙, čçáĺđĺňĺ čçďîëçâŕí ĺçčę."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Ëîř backup-ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Çŕďŕçč âúâ ôŕéë"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Ěîë˙, ďđîáâŕéňĺ ěčřęŕňŕ ńč"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ěîë˙, čçáĺđĺňĺ ďŕęĺňčňĺ, ęîčňî čńęŕňĺ äŕ číńňŕëčđŕňĺ."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Íŕńňđîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Íŕńňđîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Íŕńňđîéęŕ"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Íŕńňđîéęŕ íŕ ëîęŕëíŕ ěđĺćŕ"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Ôŕéëîâč ńčńňĺěč"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Číńňŕëŕöč˙ňŕ íŕ %s ďđîâŕëĺíŕ. Ďî˙âč ńĺ ńëĺäíŕňŕ ăđĺřęŕ:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s íĺ ĺ íŕěĺđĺíî"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Ăîňîâî"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Ôîđěŕňčđŕé äčńęĺňŕňŕ"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ďîäăîňâ˙ě číńňŕëŕöč˙ňŕ"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "ńňŕđňčđŕé ăî"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "îăđŕíč÷č"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Ôîđěŕňčđŕíĺ íŕ ä˙ëîâĺ"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Äĺčíńňŕëčđŕě ďŕęĺňŕ"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Íŕńňđîéęŕ íŕ ëîęŕëíŕ ěđĺćŕ"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Ě˙ńňî íŕ ěîíňčđŕíĺ"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Čçáĺđĺňĺ ä˙ëîâĺňĺ, ęîčňî čńęŕňĺ äŕ ôîđěŕňčđŕňĺ"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Îôčń"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Îňęŕç"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Ďđčíňĺđ"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Číńňŕëčđŕíĺ íŕ ńčńňĺěŕňŕ"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Čçáĺđĺňĺ ôŕéë"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Ďđĺěŕőâŕíĺ íŕ ďđčíňĺđŕ"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Ńňŕđňîâî ńúîáůĺíčĺ"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Í˙ěŕňĺ ěđĺćîâ ŕäŕďňĺđ!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Číńňŕëčđŕé"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Í˙ěŕňĺ ěđĺćîâ ŕäŕďňĺđ!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Čçőîä îň číńňŕëŕöčîííŕňŕ ďđîăđŕěŕ"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Ńďîäĺë˙íĺ íŕ âđúçęŕňŕ ń Číňĺđíĺň"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ńďîäĺë˙íĺňî íŕ âđúçęŕňŕ ęúě Číňĺđíĺň ĺ âĺ÷ĺ ŕęňčâčđŕíî"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Óńňŕíîâęŕňŕ íŕ Ńďîäĺë˙íĺňî íŕ Číňĺđíĺň âđúçęŕňŕ ĺ çŕâúđřĺíŕ.\n"
-" ěîěĺíňŕ ĺ âęëţ÷ĺíŕ.\n"
-"\n"
-"Ęŕęâî čńęŕňĺ äŕ íŕďđŕâčňĺ ?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "čçęëţ÷č"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "îńňŕâč"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ďđĺíŕńňđîéęŕ"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Čçęëţ÷âŕíĺ íŕ ńúđâúđč ..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Ńďîäĺë˙íĺňî íŕ Číňĺđíĺň âđúçęŕňŕ â ěîěĺíňŕ ĺ čçęëţ÷ĺíî."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ńďîäĺë˙íĺňî íŕ Číňĺđíĺň âđúçęŕňŕ ĺ čçęëţ÷ĺíî."
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Óńňŕíîâęŕňŕ íŕ Ńďîäĺë˙íĺňî íŕ Číňĺđíĺň âđúçęŕňŕ ĺ âĺ÷ĺ çŕâúđřĺíŕ.\n"
-" ěîěĺíňŕ ĺ čçęëţ÷ĺíŕ.\n"
-"\n"
-"Ęŕęâî čńęŕňĺ äŕ íŕďđŕâčňĺ ?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "âęëţ÷č"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Âęëţ÷âŕíĺ íŕ ńúđâúđč ..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Ńďîäĺë˙íĺňî íŕ Číňĺđíĺň â ěîěĺíňŕ ĺ âęëţ÷ĺíî."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Íŕ ďúň ńňĺ äŕ íŕńňđîčňĺ ęîěďţňúđŕ ńč ňŕęŕ, ÷ĺ äŕ ďîäĺë˙ Číňĺđíĺň âđúçęŕňŕ\n"
-"ńč. Ń ňŕçč âúçěîćíîńň, äđóăč ęîěďţňđč â ëîęŕëíŕňŕ âč ěđĺćŕ ůĺ ěîăŕň äŕ\n"
-"čçďîëçâŕň Číňĺđíĺň âđúçęŕňŕ íŕ ňîçč ęîěďţňúđ.\n"
-"\n"
-"Îňáĺëĺćĺňĺ: ňđ˙áâŕ âč îňäĺëĺí çŕ ňîâŕ ěđĺćîâ ŕäŕďňĺđ, çŕ äŕ óńňŕíîâčňĺ "
-"âúňđĺříŕňŕ ńč ěđĺćŕ (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Číňĺđôĺéń %s (čçďîëçâŕů ěîäóë %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Číňĺđôĺéń %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Í˙ěŕňĺ ěđĺćîâ ŕäŕďňĺđ!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Â ńčńňĺěŕňŕ íĺ ĺ îňęđčň ethernet ěđĺćîâ ŕäŕďňĺđ. Ěîë˙, ńňŕđňčđŕéňĺ "
-"číńňđóěĺíňŕ çŕ íŕńňđîéęŕ íŕ őŕđäóĺđ."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Ěđĺćîâ číňĺđôĺéń"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Â ńčńňĺěŕňŕ âč čěŕ ńŕěî ĺäčí íŕńňđîĺí ěđĺćîâ ŕäŕďňĺđ:\n"
-"\n"
-"%s\n"
-"\n"
-"Ńě˙ňŕě äŕ óńňŕíîâ˙ ëîęŕëíŕňŕ âč ěđĺćŕ íŕ ňîçč ŕäŕďňĺđ."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Ěîë˙ čçáĺđĺňĺ ęîé ěđĺćîâ ŕäŕďňĺđ äŕ áúäĺ âęëţ÷ĺí ęúě ëîęŕëíŕňŕ âč ěđĺćŕ."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Ôóíęöčîíŕëíîńňňŕ íŕ ěđĺćŕňŕ íĺ ĺ íŕńňđîĺíŕ"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Ŕâňîěŕňč÷íŕ íŕńňđîéęŕ íŕ CUPS"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Ďîďđŕâč íŕńňđîéęčňĺ íŕ ďđčíňĺđ"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP íŕ CUPS ńúđâúđŕ"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Âúçěîćĺí ęîíôčęň ń ŕäđĺńčňĺ â LAN ń íŕńňđîéęŕňŕ íŕ %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Îňęđčňŕ ĺ íŕńňđîéęŕ íŕ Çŕůčňíŕ Ńňĺíŕ !"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Âíčěŕíčĺ ! Îňęđčňŕ ĺ íŕńňđîéęŕ íŕ Çŕůčňíŕ Ńňĺíŕ. Ěîćĺ äŕ ńĺ íŕëîćč í˙ęŕęâŕ "
-"đú÷íŕ ďîďđŕâęŕ ńëĺä číńňŕëŕöč˙ňŕ."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Íŕńňđîéęŕ ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Íŕńňđîéâŕůč ńęđčďňîâĺ, číńňŕëčđŕíĺ íŕ ńîôňóĺđ, ńňŕđňčđŕíĺ íŕ ńúđâúđč..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Ďđîáëĺěč ń číńňŕëčđŕíĺňî íŕ ďŕęĺňŕ %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Âńč÷ęî ĺ íŕńňđîĺíî.\n"
-"Ńĺăŕ ěîćĺňĺ äŕ ńďîäĺëčňĺ Číňĺđíĺň âđúçęŕňŕ ńč ń äđóăč ęîěďţňđč â ëîęŕëíŕňŕ "
-"âč ěđĺćŕ čçďîëçâŕéęč ŕâňîěŕňč÷íŕ ěđĺćîâŕ íŕńňđîéęŕ (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Óńňŕíîâęŕňŕ âĺ÷ĺ ĺ íŕďđŕâĺíŕ, íî â ěîěĺíňŕ ĺ čçęëţ÷ĺíŕ."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Óńňŕíîâęŕňŕ âĺ÷ĺ ĺ íŕďđŕâĺíŕ č â ěîěĺíňŕ ĺ âęëţ÷ĺíŕ."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Í˙ěŕ íŕńňđîéâŕíî ńďîäĺë˙íĺ íŕ Číňĺđíĺň âđúçęŕňŕ."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Íŕńňđîéęŕ íŕ ńďîäĺë˙íĺňî íŕ Číňĺđíĺň âđúçęŕňŕ"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Äîáđĺ äîřëč â číńňđóěĺíňŕ çŕ ńďîäĺë˙íĺ íŕ Číňĺđíĺň âđúçęŕňŕ !\n"
-"\n"
-"%s\n"
-"\n"
-"Öúęíĺňĺ ``Íŕńňđîé'', ŕęî čńęŕňĺ äŕ ńňŕđňčđŕíĺ óńňŕíîâ˙âŕůč˙ ěŕăüîńíčę."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Íŕńňđîéęŕ íŕ ěđĺćŕňŕ (%d ŕäŕďňĺđŕ)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Ďđîôčë: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Čçňđîé ďđîôčë ..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Ďđîôčë çŕ čçňđčâŕíĺ:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Íîâ ďđîôčë ..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Čěĺ íŕ ńúçäŕâŕíč˙ ďđîôčë (íîâč˙ň ďđîôčë ńĺ ńúçäŕâŕ ęŕňî ęîďčĺ íŕ ňĺęóůč˙):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Čěĺ íŕ őîńň:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Číňĺđíĺň äîńňúď"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Ňčď: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Číňĺđôĺéń:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Ńúńňî˙íčĺ:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Íŕńňđîéęŕ íŕ Číňĺđíĺň äîńňúďŕ ..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Íŕńňđîéęŕ íŕ LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Äđŕéâĺđ"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Číňĺđôĺéń"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Ďđîňîęîë"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Ńúńňî˙íčĺ"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Íŕńňîéęŕ íŕ ëîęŕëíŕ ěđĺćŕ ..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Öúęíĺňĺ ňóę, çŕ äŕ ńňŕđňčđŕňĺ ěŕăüîńíčęŕ ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Ěŕăüîńíčę..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Ďđčëîćč"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Ěîë˙, ďî÷ŕęŕéňĺ ... Ďđčëŕăŕíĺ íŕ íŕńňđîéęčňĺ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Ńâúđçŕí"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Íĺ ńâúđçŕí"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Ńâúđçâŕíĺ ..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Îňâúđçâŕíĺ ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Í˙ěŕňĺ íŕńňđîĺí číňĺđôĺéń.\n"
-"Íŕńňđîéňĺ ăč ďđĺäč ňîâŕ, ęŕňî öúęíĺňĺ íŕ 'Íŕńňđîéęŕ'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Íŕńňđîéęŕ íŕ ëîęŕëíŕ ěđĺćŕ"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Ŕäŕďňĺđ %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Ńňŕđňčđŕů ďđîňîęîë"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Ďóńíŕň ďđč ńňŕđňčđŕíĺ"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP ęëčĺíň"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "ŕęňčâčđŕé ńĺăŕ"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "äĺŕęňčâčđŕé ńĺăŕ"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Í˙ěŕňĺ Internet âđúçęŕ.\n"
-"Ńúçäŕéňĺ ňŕęŕâŕ, ęŕňî öúęíĺňĺ íŕ 'Íŕńňđîé'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Íŕńňđîéęŕ íŕ Číňĺđíĺň âđúçęŕ"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Íŕńňđîéęŕ íŕ Číňĺđíĺň âđúçęŕ"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Ňčď íŕ âđúçęŕňŕ: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Ďŕđŕěĺňđč"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet ęŕđňŕ"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP ęëčĺíň"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Čçáĺđĺňĺ íčâî íŕ ńčăóđíîńň"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Ęîíňđîëĺí öĺíňúđ"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Čçáĺđĺňĺ číńňđóěĺíňŕ, ęîéňî čńęŕňĺ äŕ čçďîëçâŕňĺ"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Ęŕíŕäńęŕ (Ęâĺáĺę)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Ĺâđîďŕ"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Čńëŕíäńęŕ"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Ĺâđîďŕ"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "ńĺđčéíŕ"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "óďîňđĺáŕ: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Ěîë˙, čçáĺđĺňĺ ďîäđĺćäŕíĺ íŕ ęëŕâčŕňóđŕňŕ."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Čńęŕňĺ ëč BackSpace äŕ ďîäŕâŕ Delete íŕ ęîíçîëŕňŕ ?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Ńě˙íŕ íŕ CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ěîë˙, ńëîćĺňĺ Číńňŕëŕöčîííč˙ CD-ROM â óńňđîéńňâîňî č íŕňčńíĺňĺ Ok, ęîăŕňî "
-"ńňĺ ăîňîâč.\n"
-"Ŕęî ăî í˙ěŕňĺ, íŕňčńíĺňĺ Îňě˙íŕ, çŕ äŕ čçáĺăíĺňĺ číńňŕëčđŕíĺňî îň ňîçč CD-"
-"ROM."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Íĺ ěîăŕ äŕ ďóńíŕ îáíîâ˙âŕíĺňî !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "ëîăäđĺéę"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ôŕéë/_Íîâ"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<ęîíňđîë>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ôŕéë/_Îňâîđč"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<ęîíňđîë>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Ôŕéë/_Çŕďčń"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<ęîíňđîë>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Ôŕéë/Çŕďčřč _Ęŕňî"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Ôŕéë/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Îďöčč"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Îďöčč/Ňĺńň"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ďîěîů"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ďîěîů/_Çŕ..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Ďîňđĺáčňĺëńęî čěĺ"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ńúîáůĺíč˙"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "ńčńňĺěĺí ëîă"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "ňúđńč"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Číńňđóěĺíň çŕ ďđĺăëĺćäŕíĺ íŕ âŕřčňĺ ëîă ôŕéëîâĺ"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Íŕńňđîéęč"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "ńúâďŕäĺíčĺ"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "íî íĺ ńúâďŕäŕ"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Čçáĺđĺňĺ ôŕéë"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Ęŕëĺíäŕđ"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Ńúäúđćŕíčĺ íŕ ôŕéëŕ"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ěîë˙ čç÷ŕęŕéňĺ, ďđŕâ˙ đŕçáîđ íŕ ôŕéë: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Íŕńňđîéęŕ íŕ LILO/Grub"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Äîáđĺ äîřëč â íŕńňđîéęŕňŕ íŕ Proxy.\n"
-"\n"
-"Ňóę ůĺ ěîćĺňĺ äŕ óńňŕíîâčňĺ âŕřčňĺ HTTP č FTP proxy\n"
-"ńúń čëč áĺç ďîňđĺáčňĺëńęî čěĺ č ďŕđîëŕ\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache č Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Čçëĺç"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "číňĺđĺńĺí"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Ôîđěŕňčđŕíĺ"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Íŕńňđîéęŕ íŕ öâĺňîâĺ"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Çŕďŕçč ęŕňî..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Ěîë˙, čçáĺđĺňĺ ňčď íŕ ěčřęŕňŕ."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "íĺ ĺ íŕěĺđĺí serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Äŕ ńčěóëčđŕě ëč ňđĺňč áóňîí ?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Čçáĺđĺňĺ ăđŕôč÷íŕ ęŕđňŕ"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Ńňŕđňčđŕůî óńňđîéńňâî"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Íŕńňđîéęŕ íŕ Çŕůčňíŕ Ńňĺíŕ"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Íŕńňđîéęŕ íŕ Çŕůčňíŕ Ńňĺíŕ"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Çŕůčňíŕ ńňĺíŕ\n"
-"\n"
-"Âĺ÷ĺ ńňĺ íŕńňđîčëč çŕůčňíŕ ńňĺíŕ.\n"
-"Öúęíĺňĺ Íŕńňđîé, çŕ äŕ óńňŕíîâčňĺ ńňŕíäŕđňíŕ çŕůčňíŕ ńňĺíŕ"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Çŕůčňíŕ ńňĺíŕ\n"
-"\n"
-"Öúęíĺňĺ Íŕńňđîé, çŕ äŕ óńňŕíîâčňĺ ńňŕíäŕđňíŕ çŕůčňíŕ ńňĺíŕ"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Čçáîđ íŕ ĺçčę"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Čçáîđ íŕ ęëŕń číńňŕëŕöč˙"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Çŕńč÷ŕíĺ íŕ äčńęîâĺňĺ"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Íŕńňđîéęŕ íŕ ěčřęŕ"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Čçáîđ íŕ ęëŕâčŕňóđŕ"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Ńčăóđíîńň"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Ôŕéëîâč ńčńňĺěč"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ôîđěŕňčđŕíĺ íŕ ä˙ëîâĺ"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Ďŕęĺňč çŕ číńňŕëčđŕíĺ"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Číńňŕëčđŕíĺ íŕ ńčńňĺěŕňŕ"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Äîáŕâ˙íĺ íŕ ďîňđĺáčňĺë"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Íŕńňîéęŕ íŕ ěđĺćŕňŕ"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Íŕńňđîéęŕ íŕ óńëóăčňĺ"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Číńňŕëčđŕíĺ íŕ bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Ńúçäŕâŕíĺ íŕ boot-äčńęĺňŕ"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Íŕńňđîéęŕ íŕ Ő"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Číńňŕëčđŕíĺ íŕ ńčńňĺěŕňŕ"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Čçőîä îň číńňŕëŕöčîííŕňŕ ďđîăđŕěŕ"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Íŕńňđîé÷čę çŕ ěŕëęŕ çŕůčňíŕ ńňĺíŕ\n"
-"\n"
-"Ňîâŕ íŕńňđîéâŕ ďĺđńîíŕëíŕ çŕůčňíŕ ńňĺíŕ çŕ ňŕçč Mandrake Linux ěŕřčíŕ.\n"
-"Çŕ ěîůíî ďîńňâĺňĺíî íŕ çŕůčňŕňŕ đĺřĺíčĺ, ěîëĺ, ďîăëĺäíĺňĺ ńďĺöčŕëčçčđŕíŕňŕ\n"
-"MandrakeSecurity Firewall äčńňđčáóöč˙."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ńĺăŕ ůĺ âč çŕäŕäĺě âúďđîńč çŕ ňîâŕ, ęúě ęîč óńëóăč áčőňĺ čńęŕëč äŕ\n"
-"ďîçâîëčňĺ íŕ Číňĺđíĺň äŕ ńâúđçâŕ. Ěîë˙, ďîěčńëĺňĺ âíčěŕňĺëíî ďî\n"
-"ňĺçč âúďđîńč, ňúé ęŕňî ńčăóđíîńňňŕ íŕ ęîěďţňúđŕ âč ĺ âŕćíŕ.\n"
-"\n"
-"Ěîë˙, ŕęî â ěîěĺíňŕ íĺ čçďîëçâŕňĺ í˙ęî˙ îň óńëóăčňĺ, çŕůčňĺňĺ ˙.\n"
-"Ěîćĺňĺ äŕ ďđîěĺíčňĺ íŕńňđîéęŕňŕ ďî âń˙ęî âđĺěĺ, ŕęî čńęŕňĺ, ęŕňî\n"
-"ńňŕđňčđŕňĺ îňíîâî ňîâŕ ďđčëîćĺíčĺ !"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Čçďîëçâŕňĺ ëč Web ńúđâúđ íŕ ňŕçč ěŕřčíŕ, ęîéňî čńęŕňĺ öĺëč˙ň Číňĺđíĺň\n"
-"çŕ âčćäŕ ? Ŕęî čçďîëçâŕňĺ, ęîéňî ňđ˙áâŕ äŕ áúäĺ äîńňúďĺí îň ňŕçč ěŕřčíŕ,\n"
-"ěîćĺňĺ ńďîęîéíî äŕ îňăîâîđčňĺ ń Íĺ ňóę.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Čçďîëçâŕňĺ ëč Name ńúđâúđ íŕ ňŕçč ěŕřčíŕ ? Ŕęî íĺ čńęŕňĺ äŕ ďđĺäîńňŕâ˙ňĺ\n"
-"číôîđěŕöč˙ çŕ IP-ňŕ č çîíč íŕ öĺëč˙ Číňĺđíĺň, ěîë˙, îňăîâîđĺňĺ Íĺ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Čńęŕňĺ ëč äŕ đŕçđĺřčňĺ âőîä˙ůč Secure SHell (SSH) âđúçęč ? Ňîâŕ ĺ\n"
-"çŕěĺńňčňĺë íŕ telnet, ęîéňî ěîćĺňĺ äŕ čçďîëçâŕňĺ çŕ âëčçŕíĺ. Ŕęî â\n"
-"ěîěĺíňŕ čçďîëçâŕňĺ telnet, îďđĺäĺëĺíî ňđ˙áâŕ äŕ ďđĺěčíĺňĺ ęúě SSH.\n"
-"Telnet íĺ ĺ ęđčďňčđŕí -- ňŕęŕ ÷ĺ í˙ęîč ŕňŕęóâŕůč ěîăŕň äŕ îňęđŕäíŕň\n"
-"ďŕđîëŕňŕ âč, ŕęî ăî čçďîëçâŕňĺ. SSH ĺ ęđčďňčđŕí č čçęëţ÷âŕ ňŕęŕâŕ\n"
-"čçäúíęŕ."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Čńęŕňĺ ëč äŕ ďîçâîëčňĺ âőîä˙ůč telnet âđúçęč ?\n"
-"Ňîâŕ ĺ óćŕńíî íĺńčăóđíî, ęŕęňî îá˙ńíčőěĺ â ďđĺäčříč˙ ĺęđŕí. Ńčëíî\n"
-"âč ďđĺďîđú÷âŕěĺ äŕ îňăîâîđčňĺ Íĺ ňóę č äŕ čçďîëçâŕňĺ SSH âěĺńňî\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Čěŕňĺ ëč FTP ńúđâúđ ňóę, ęîéňî ňđ˙áâŕ äŕ ĺ äîńňúďĺí çŕ Číňĺđíĺň ?\n"
-"Ŕęî čěŕňĺ, ńčëíî âč ďđĺďîđú÷âŕěĺ äŕ ăî čçďîëçâŕňĺ çŕ ŕíîíčěíč ňđŕíńôĺđč.\n"
-"Âńč÷ęč ďŕđîëč čçďđŕůŕíč ďî FTP ěîăŕň äŕ áúäŕň îňęđŕäíŕňč îň ŕňŕęóâŕůŕ\n"
-"ëč÷íîńň, ňúé ęŕňî FTP íĺ čçďîëçâŕ ęđčďňîăđŕôč˙ çŕ ďđĺőâúđë˙íĺňî čě.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Čěŕňĺ ëč ďîůĺíńęč ńúđâúđ ňóę ? Ŕęî čçďđŕůŕňĺ ńúîáůĺíč˙ňŕ ńč\n"
-"÷đĺç pine, mutt čëč ęŕęúâňî č äŕ ĺ äđóă ňĺęńňîâ ďîůĺíńęč ęëčĺíň,\n"
-"ěîćĺ áč čěŕňĺ.  ďđîňčâĺí ńëó÷ŕé, ňđ˙áâŕ äŕ çŕůčňčňĺ ňîâŕ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Čěŕňĺ ëč POP čëč IMAP ńúđâúđ ňóę ? Ňîâŕ ěîćĺ äŕ áúäĺ\n"
-"čçďîëçâŕíî äŕ ďđčţň˙âŕíĺ íŕ íĺ-web-áŕçčđŕíč ďîůĺíńęč ŕęŕóíňč\n"
-"ďđĺç ňŕçč ěŕřčíŕ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Ń˙ęŕř čçďîëçâŕňĺ 2.2 ˙äđî. Ŕęî ěđĺćîâîňî IP ŕâňîěŕňč÷íî ńĺ\n"
-"îďđĺäĺë˙ îň ęîěďţňúđ ó âŕń čëč â îôčńŕ (äčíŕěč÷íî ďîńňŕâ˙íî),\n"
-"ňđ˙áâŕ äŕ ďîçâîëčě ňîâŕ. Ňŕęúâ ëč ĺ ńëó÷ŕ˙ ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Âđĺěĺňî íŕ ęîěďţňúđŕ âč ńčíőđîíčçčđŕ ëč ńĺ ń äđóă ęîěďţňúđ ?\n"
-"Ňîâŕ ăëŕâíî ńĺ čçďîëçâŕ â ńđĺäíî-ăîëĺěč Unix/Linux îđăŕíčçŕöčč,\n"
-"çŕ äŕ ńč ńčíőđîíčçčđŕ âđĺěĺňî çŕ çŕďčńâŕíĺ íŕ ńňŕňóńŕ č ňŕęčâŕ đŕáîňč.\n"
-"Ŕęî íĺ ńňĺ ÷ŕńň îň ďî-ăîë˙ě îôčń č íĺ ńňĺ ÷óâŕëč çŕ ňŕęîâŕ íĺůî,\n"
-"ěîćĺ áč íĺ âč ňđ˙áâŕ."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Íŕńňđîéęŕňŕ çŕâúđřĺíŕ. Äŕ çŕďčřĺě ëč ďđîěĺíčňĺ íŕ äčńęŕ ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Íĺ ěîăŕ äŕ îňâîđ˙ %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Íĺ ěîăŕ äŕ îňâîđ˙ %s çŕ çŕďčń: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Íŕńňđîéęŕ íŕ Çŕůčňíŕ Ńňĺíŕ"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Ěîë˙, čç÷ŕęŕéňĺ, ďîäăîňâ˙íĺ íŕ číńňŕëŕöč˙ňŕ"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Ńúđâúđ, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ěđĺćîâ ęîěďţňúđ (ęëčĺíň)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS ńúđâúđ, SMB ńúđâúđ, Proxy ńúđâúđ, SSH ńúđâúđ"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Îôčń"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome đŕáîňíŕ ńňŕíöč˙"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Číńňđóěĺíňč çŕ âŕřč˙ Palm Pilot čëč Visor-ŕ âč"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Đŕáîňíŕ ńňŕíöč˙"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Ńúđâúđ, Firewall/Đóňĺđ"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Čěĺ íŕ äîěĺéí č Ěđĺćîâ Číôîđěŕöčîíĺí Ńúđâúđ"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Îôčń ďđîăđŕěč: word-ďđîöĺńîđč (kword, abiword), ňŕáëčöč (kspread, gnumeric), "
-"ďđĺăëĺä íŕ PDF, č ň.í."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Číńňđóěĺíňč çŕ ŕóäčî: MP3 čëč MIDI ďëĺéúđč, ěčęńĺđč, č ň.í. "
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Ęíčăč č HOTWO-ňŕ çŕ Linux č ńâîáîäíč˙ ńîôňóĺđ"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE đŕáîňíŕ ńňŕíöč˙"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm č ň.í."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Ěóëňčěĺäč˙ - Âčäĺî"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Íŕáîđ îň číńňđóěĺíňč çŕ ďîůŕ, íîâčíč, web, ôŕéëîâ ňđŕíńôĺđ, č ÷ŕň"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Ńúđâúđ, Áŕçč-äŕííč"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL čëč MySQL ńúđâúđ çŕ áŕçč-äŕííč"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Číńňđóěĺíňč çŕ óëĺńí˙âŕíĺ íŕńňđîéęŕňŕ íŕ ęîěďţňúđŕ âč"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Ěóňčěĺäč˙ - Çâóę"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Číńňđóěĺíňč"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Äîęóěĺíňŕöč˙"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ęîíçîëíč číńňđóěĺíňč"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix ďîůĺíńęč ńúđâúđ, Inn íîâčíŕđńęč ńúđâúđ"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Číňĺđíĺň ńňŕíöč˙"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Ěóňčěĺäčéíŕ ńňŕíöč˙"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Íŕńňđîéęŕ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Îůĺ ăđŕôč÷íč desktop-č (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, ďđîńňŕ ńđĺäŕ ń ęîëĺęöč˙ îň ďđčäđóćŕâŕůč "
-"číńňđóěĺíňč"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ăđŕôč÷íŕ ńđĺäŕ"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache č Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Číńňđóěĺíňč çŕ ńúçäŕâŕíĺ č îďč÷ŕíĺ íŕ CD-ňŕ"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Îôčńíŕ đŕáîňíŕ ńňŕíöč˙"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Ńúđâúđ"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, č ň.í."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Ăđŕôč÷íč ďđîăđŕěč ęŕňî The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "FND/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Áčáëčîňĺęč çŕ đŕçđŕáîňęŕ íŕ C č C++, ďđîăđŕěč č include ôŕéëîâĺ"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Ěđĺćîâ ęîěďţňúđ, ńúđâúđ"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Ńúđâúđ, Ďîůŕ/Groupware/Íîâčíč"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Čăđŕëíŕ ńňŕíöč˙"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Âčäĺî ďëĺéúđč č đĺäŕęňîđč"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Ěóëňčěĺäč˙ - Ăđŕôčęŕ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Çŕáŕâíč ďđîăđŕěč: ŕđęŕäíč čăđč, čăđč íŕ ěŕńŕ, ńňđŕňĺăčč č ň.í."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Íŕáîđ îň číńňđóěĺíňč çŕ ÷ĺňĺíĺ č čçďđŕůŕíĺ íŕ ďîůŕ č íîâčíč (pine, mutt, "
-"tin..) č çŕ îáčęŕë˙íĺ čç Ěđĺćŕňŕ"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Ŕđőčâčđŕřč, ĺěóëŕöč˙, íŕáëţäĺíčĺ"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Ëč÷íč ôčíŕíńč"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Ăđŕôč÷íŕ ńđĺäŕ ń ďîňđĺáčňĺëńęč íŕáîđ îň ďđčëîćĺíč˙ č desktop číńňđóěĺíňč"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Ęëčĺíňč çŕ đŕçëč÷íč ďđîňîęîëč âęëţ÷čňĺëíî SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Číňĺđíĺň gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Ďđîăđŕěč çŕ ďóńęŕíĺ/ďîďđŕâ˙íĺ íŕ çâóę č âčäĺî"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Äđóăč ăđŕôč÷íč desktop-č"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Đĺäŕęňîđč, řĺëîâĺ, ôŕéëîâč číńňđčěĺíňč, ňĺđěčíŕëč"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Ďđîăđŕěč çŕ îáđŕáîňęŕ íŕ ôčíŕíńč, ęŕňî gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Îáđŕáîňęŕ íŕ ëč÷íŕ číôîđěŕöč˙"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Ěóëňčěĺäč˙ - îďč÷ŕíĺ íŕ CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Íŕó÷íŕ đŕáîňíŕ ńňŕíöč˙"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Îňęŕç"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Íĺ ěîăŕ äŕ îńúůĺńňâ˙ äîńňúď äî ěîäóëčňĺ íŕ ˙äđîňî ńúîňâĺňńâŕůč íŕ ˙äđîňî "
-#~ "âč (ôŕéëúň %s ëčďńâŕ)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Íčęŕęúâ"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Čçáĺđĺňĺ ďđčíňĺđ ďî ďîäđŕçáčđŕíĺ"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Ďđčëŕăŕíĺ/Ďđĺďđî÷čň íŕ ďđčíňĺđčňĺ"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Ńĺăŕ ěîćĺňĺ äŕ ďîäŕäĺňĺ îďöččňĺ ěó ęúě ěîäóëŕ %s."
-
-#~ msgid "mount failed"
-#~ msgstr "ěîíňčđŕíĺňî íĺ óńď˙"
-
-#~ msgid "Low"
-#~ msgstr "Ńëŕáî"
-
-#~ msgid "Medium"
-#~ msgstr "Ńđĺäĺíî"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Í˙ęîč ďîäîáđĺíč˙ çŕ ňîâŕ íčâî íŕ ńčăóđíîńň. Ăëŕâíîňî ĺ, ÷ĺ čěŕ ďîâĺ÷ĺ\n"
-#~ "ďđĺäóďđĺćäĺíč˙ č ďđîâĺđęč çŕ ńčăóđíîńň."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Ěóëňčěĺäč˙"
-
-#~ msgid "Boot mode"
-#~ msgstr "Đĺćčě íŕ ńňŕđňčđŕíĺ"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Ĺęńďĺđňíŕ"
-
-#, fuzzy
-#~ msgid ""
-#~ "To know about the options available for the current printer read either "
-#~ "the list shown below or click on the \"Print option list\" button. %s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Çŕ äŕ âčäčňĺ ńďčńúę íŕ äîńňúďíčňĺ îďöčč çŕ ňĺęóůč˙ ďđčíňĺđ, čëč ďđî÷ĺňĺňĺ "
-#~ "ńďčńúęŕ ďîęŕçŕí ďî-äîëó čëč öúęíĺňĺ íŕ áóňîíŕ \"Ńďčńúę ń îďöčč çŕ ďĺ÷ŕň"
-#~ "\".\n"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linux đŕáîňč ń âđĺěĺ ďî GMT (Âđĺěĺ ďî Ăđčíóč÷)\n"
-#~ "č ăî ďđĺâĺćäŕ â ëîęŕëíî âđĺěĺ â çŕâčńčěîńň îň çîíŕňŕ, ęî˙ňî ńňĺ čçáđŕëč."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Ńâúđćč ńĺ ęúě Číňĺđíĺň"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Îňâúđćč ńĺ îň Číňĺđíĺň"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Íŕńňđîéęŕ íŕ ěđĺćîâŕňŕ âđúçęŕ (LAN čëč Číňĺđíĺň)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Íŕ ęîé äčńę čńęŕňĺ äŕ ăî ďđĺěĺńňčňĺ ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Ěîë˙, čçáĺđĺňĺ ďŕęĺňčňĺ, ęîčňî čńęŕňĺ äŕ číńňŕëčđŕňĺ."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Číôîđěŕöč˙"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome đŕáîňíŕ ńňŕíöč˙"
-
-#~ msgid "authentification"
-#~ msgstr "óäîńňîâĺđ˙âŕíĺ"
-
-#~ msgid "user"
-#~ msgstr "ďîňđĺáčňĺë"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server. It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Apache ĺ World Wide Web (WWW) ńúđâúđ. Ňîé ńëóćč äŕ îáđŕáîňâŕ íŕ HTML "
-#~ "ôŕéëîâĺ\n"
-#~ "č CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) ĺ Domain Name Server (DNS), ęîéňî ńĺ čçďîëçâŕ äŕ ďđĺâúđíĺ\n"
-#~ "čěĺňî íŕ őîńňŕ äî IP ŕäđĺń."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Ěîë˙, čçáĺđĺňĺ ňčď íŕ ěčřęŕňŕ."
-
-#~ msgid "Scanning available nfs shared resource"
-#~ msgstr "Ňúđńĺíĺ íŕ äîńňúďíč NFS ńďîäĺëĺíč đĺńóđńč"
-
-#~ msgid "Scanning available nfs shared resource of server %s"
-#~ msgstr "Ňúđńĺíĺ çŕ äîńňúďíč NFS đĺńóđńč íŕ ńúđâúđ %s"
-
-#~ msgid "Scanning available samba shared resource"
-#~ msgstr "Ńęŕíčđŕíĺ íŕ äîńňúďíčňĺ SAMBA ďîäĺëĺíč đĺńóđńč"
-
-#~ msgid "Scanning available samba shared resource of server %s"
-#~ msgstr "Ńęŕíčđŕíĺ íŕ äîńňúďíčňĺ SAMBA ďîäĺëĺíč đĺńóđńč íŕ ńúđâúđ %s"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Čçőîä"
-
-#~ msgid "Removable media"
-#~ msgstr "Ńěĺí˙ĺě íîńčňĺë"
-
-#~ msgid "Active"
-#~ msgstr "Ŕęňčâčđŕé"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Íĺ"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Ďđčíňĺđ îň ěîäĺëŕ \"%s\", ĺ íŕěĺđĺí íŕ "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Ëîęŕëíî ďĺ÷ŕňŕůî óńňđîéńňâî"
-
-#~ msgid "Printer Device"
-#~ msgstr "Ďĺ÷ŕňŕůî óńňđîéńňâî"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Ëčďńâŕ čěĺ íŕ óńňđîéńňâî/ôŕéë !"
-
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Ďđčíňĺđ(č) íŕ îňäŕëĺ÷ĺí(č) CUPS ńúđâúđ(č)"
-
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Ďđčíňĺđ(č) íŕ îňäŕëĺ÷ĺí(č) ńúđâúđ(č)"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Ńčńňĺěŕ"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Äđóăŕ"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Ěîë˙, čçáĺđĺňĺ ďîäđĺćäŕíĺ íŕ ęëŕâčŕňóđŕňŕ."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Ěîë˙, öúęíĺňĺ íŕ íîńčňĺë˙"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Âčä: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Ëîř backup-ôŕéë"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Íŕńňđîéęŕ íŕ Ő"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Ďĺ÷ŕňŕůî óńňđîéńňâî"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Îňě˙íŕ"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ok"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Çŕňâîđč"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Ńňŕđňčđŕíĺ íŕ âđúçęŕňŕ ...."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Çŕňâŕđ˙íĺ íŕ âđúçęŕňŕ âč ..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Âđúçęŕňŕ íĺ ĺ çŕňâîđĺíŕ.\n"
-#~ "Îďčňŕéňĺ ńĺ äŕ ăî íŕďđŕâčňĺ đú÷íî, ęŕňî ńňŕđňčđŕňĺ\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "ęŕňî root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Ńčńňĺěŕňŕ â ěîěĺíňŕ íĺ ĺ ńâúđçŕíŕ."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Čçáĺđĺňĺ ăîëĺěčíŕňŕ, ęî˙ňî čńęŕňĺ äŕ číńňŕëčđŕňĺ"
-
-#~ msgid "Total size: "
-#~ msgstr "Îáůŕ ăîëĺěčíŕ: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Ěîë˙, čç÷ŕęŕéňĺ, "
-
-#~ msgid "Total time "
-#~ msgstr "Îáůŕ ďđîäúëćčňĺëíîńň "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Äŕ čçďîëçâŕě ëč ńĺăŕříŕňŕ íŕńňđîéęŕ íŕ X11 ?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Ęúäĺ ĺ ńâúđçŕí âŕřč˙ ďđčíňĺđ \n"
-#~ "(çŕáĺëĺćęŕ: /dev/lp0 ĺ ĺęâčâŕëĺíňíî íŕ LPT1) ?\n"
-
-#~ msgid "%s"
-#~ msgstr "%s"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr "Âíčěŕíčĺ, ěđĺćîâč˙ň ŕäŕďňĺđ âĺ÷ĺ ĺ íŕńňđîĺí. Ůĺ ăî ďđĺíŕńňđî˙."
-
-#~ msgid "New"
-#~ msgstr "Íîâ"
-
-#~ msgid "Remote"
-#~ msgstr "Îňäŕëĺ÷ĺí"
-
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr ""
-#~ "Ěîë˙, öúęíĺňĺ íŕ áóňîíŕ ďî-ăîđĺ\n"
-#~ "\n"
-#~ "Čëč čçďîëçâŕéňĺ \"Íîâ\""
-
-#~ msgid "Use \"New\""
-#~ msgstr "Čçďîëçâŕéňĺ \"Íîâ\""
-
-#~ msgid "If the list above doesn't contain the wanted entry, enter it here:"
-#~ msgstr "Ŕęî ńďčńúęúň ďî-ăîđĺ íĺ ńúäúđćŕ čńęŕíč˙ ĺëĺěĺíň, âúâĺäĺňĺ ăî ňóę:"
-
-#~ msgid "Shared resource"
-#~ msgstr "Ďîäĺëĺíč đĺńóđńč"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "..... (%s), áúäĺňĺ ďî-ňî÷ĺí\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (ďî ďîäđŕçáčđŕíĺ ĺ %s)"
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "Âŕřč˙ň čçáîđ ? (ďî ďîäđŕçáčđŕíĺ %s, âúâĺäĺňĺ 'none' çŕ íčęîé)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "íĺ ěîăŕ äŕ îňâîđ˙ /etc/sysconfig/autologin çŕ ÷ĺňĺíĺ: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Čńęŕňĺ ëč äŕ đĺńňŕđňčđŕě ěđĺćŕňŕ ?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Ńúăëŕńíč ëč ńňĺ ?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Íŕ ďúň ńúě äŕ đĺńňŕđňčđŕě ěđĺćîâîňî óńňđîéńňâî:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr ""
-#~ "Íŕ ďúň ńúě äŕ đĺńňŕđňčđŕě ěđĺćîâîňî óńňđîéńňâî %s. Ńúăëŕńíč ëč ńňĺ ?"
-
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Îńâĺí ŕęî íĺ ńňĺ ńčăóđíč â îáđŕňíîňî, îáčęíîâĺíč˙ čçáîđ ĺ \"/dev/hda\"\n"
-#~ "(ďúđâč âîäĺůî IDE äčńę) čëč \"/dev/sda\" (ďúđâč SCSI äčńę)."
-
-#~ msgid ""
-#~ "The following printers are configured.\n"
-#~ "You can add some more or modify the existing ones."
-#~ msgstr ""
-#~ "Ńëĺäíčňĺ ďđčíňĺđč ńŕ íŕńňđîĺíč.\n"
-#~ "Ěîćĺňĺ äîáŕâčňĺ îůĺ čëč äŕ ďđîěĺíčňĺ ńúůĺńňâóâŕůčňĺ."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Ŕęî ďđîäúëćčňĺ, ůĺ ńďđŕ %s ńđĺäŕňŕ âč"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Âíčěŕíčĺ:\n"
-#~ "Ďđčëŕăŕéęč íŕ ďđîěĺíčĺ ďî âđĺěĺ íŕ đŕáîňŕ ěîćĺ äŕ ńúńčďĺ X ńđĺäŕňŕ âč."
-
-#~ msgid "%s is already in use"
-#~ msgstr "Ĺňčęĺňúň %s ńĺ čçďîëçâŕ âĺ÷ĺ"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(ěîćĺ äŕ ďđč÷číč çŕăóáŕ íŕ äŕííč)"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Ňđ˙áâŕ äŕ âúâĺäĺňĺ ęîěŕíäĺí đĺä !"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Íŕńňđîéęŕ íŕ ADSL"
-
-#~ msgid "Adapter"
-#~ msgstr "Ŕäŕďňĺđ"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Äîáŕâč ě˙ńňî íŕ ďŕęĺňčňĺ"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Ńëĺä ôîđěŕňčđŕíĺ íŕ âńč÷ęč ä˙ëîâĺ,"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Ěîäĺě Alcatel"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Ńčăóđíč ëč ńňĺ, ÷ĺ ńňĺ ĺęńďĺđň ?\n"
-#~ "Ňóę ůĺ âč áúäŕň ďîçâîëĺíč ěîůíč, íî îďŕńíč íĺůŕ.\n"
-#~ "Ŕęî Âč áúäĺ çŕäŕäĺí âúďđîń: ``Use shadow file for passwords?'',\n"
-#~ "ůĺ ěîćĺňĺ ëč äŕ ăî đŕáĺđĺňĺ č îňăîâîđčňĺ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Ŕâňîěŕňč÷íî číńňŕëčđŕíĺ îň ôëîďč"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Ŕâňîěŕňč÷íč çŕâčńčěîńňč"
-
-#~ msgid "Available packages"
-#~ msgstr "Íŕëč÷íč ďŕęĺňč"
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Âíčěŕíčĺ, ŕęî ĺ âęëţ÷ĺí numlock ěîćĺ äŕ äîâĺäĺ äî čçâĺćäŕíĺňî íŕ\n"
-#~ "÷čńëŕ âěĺńňî áóęâč (íŕďđčěĺđ: íŕňčńęŕéęč 'p' äŕâŕ '6')"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Íŕńňđîéęŕ íŕ íŕ÷číŕ íŕ ńňŕđňčđŕíĺ"
-
-#~ msgid "CUPS starting"
-#~ msgstr "Ńňŕđňčđŕíĺ íŕ CUPS"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Íĺ ěîćĺ äŕ čçďîëçâŕňĺ supermount ďđč âčńîęî íčâî íŕ ńčăóđíîńň"
-
-#~ msgid "Category"
-#~ msgstr "Ęŕňĺăîđč˙"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "×ŕň (IRC čëč ěîěĺíňíč ńúîáůĺíč˙) ďđîăđŕěč ęŕňî xchat, licq, gaim č "
-#~ "číńňđóěĺíňč çŕ ňđŕíńôĺđ íŕ ôŕéëîâĺ"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Ďđîâĺđ˙âŕě çŕâčńčěîńňčňĺ"
-
-#~ msgid "Choice"
-#~ msgstr "Čçáîđ"
-
-#~ msgid "Choose"
-#~ msgstr "Čçáĺđč"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Čçáĺđĺňĺ ĺçčęúň íŕ ęëŕâčŕňóđŕňŕ âč îň ńďčńúęŕ ďî-äîëó"
-
-#~ msgid "Collapse all"
-#~ msgstr "Čç÷čńňč âńč÷ęî"
-
-#~ msgid "Color depth options"
-#~ msgstr "Îďöčč çŕ äúëáî÷číŕ íŕ öâĺňŕ"
-
-#~ msgid "Command line"
-#~ msgstr "Ęîěŕíäĺí đĺä"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Číńňđóěĺíňč çŕ ęîěóíčęŕöč˙"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Ńúäúđćŕíčĺňî íŕ íŕńňđîéâŕůč˙ ôŕéë íĺ ěîćĺ äŕ áúäĺ đŕçáđŕíî."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Íŕńňđîéęŕ íŕ Lilo/Grub"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Íŕńňđîéęŕ íŕ LILO/GRUB"
-
-#~ msgid "Configure local network"
-#~ msgstr "Íŕńňîéęŕ íŕ ëîęŕëíŕňŕ ěđĺćŕ"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Íŕńňđîéęŕ íŕ Číňĺđíĺň âđúçęŕňŕ / Íŕńňđîéęŕ íŕ ëîęŕëíŕňŕ ěđĺćŕ"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Íŕńňđîéęŕ íŕ ÷ŕńîâŕ çîíŕ"
-
-#~ msgid "Configure..."
-#~ msgstr "Íŕńňđîé ..."
-
-#~ msgid "Confirm Password"
-#~ msgstr "Ďîňâúđćäĺíčĺ íŕ ďŕđîëŕňŕ"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Ńâúđçâŕíĺ ęúě Číňĺđíĺň "
-
-#~ msgid "Connection Time: "
-#~ msgstr "Âđĺěĺ íŕ âđúçęŕňŕ: "
-
-#~ msgid "Connection complete."
-#~ msgstr "Ńâđúçâŕíĺňî čçâúđřĺíî."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Ńâúđçâŕíĺňî íĺ óńď˙.\n"
-#~ "Ďđîâĺđĺňĺ íŕńňđîéęŕňŕ â Mandrake Control Center."
-
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Timeout íŕ âđúçęŕňŕ (â ńĺę) [ áĺňŕ, íĺ ĺ âęŕđŕíî ]"
-
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Íĺ ěîćŕő äŕ îďđĺäĺë˙ \"%s\" çŕ ďîëçâŕíĺ ďî ďîäđŕçáčđŕíĺ !"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Ńúçäŕâŕíĺ íŕ boot-äčńęĺňŕ"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Ńúçäŕâŕíĺňî íŕ boot äčńęĺňŕ ĺ ńčëíî ďđĺďîđú÷čňĺëíî. Ŕęî íĺ\n"
-#~ "ěîćĺňĺ äŕ ńňŕđňčđŕňĺ ęîěďţňúđŕ ńč, ňîâŕ ĺ ĺäčíńňâĺíč˙ íŕ÷čí äŕ\n"
-#~ "ńďŕńčňĺ ńčńňĺěŕňŕ áĺç ďđĺčíńňŕëŕöč˙."
-
-#~ msgid "Customized"
-#~ msgstr "Ńďĺöčŕëčçčđŕíŕ"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "×ĺřęŕ (Ďđîăđŕěčńňč)"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Ńúđâúđ, DNS/DHCP "
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (čëč ADSL) âđúçęŕ"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Ęëčĺíňč č ńúđâúđ íŕ áŕçč äŕííč (MySQL č PostgreSQL)"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Runlevel ďî ďîäđŕçáčđŕíĺ"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Đŕçđŕáîňęŕ íŕ C/C++"
-
-#~ msgid "Development, Database"
-#~ msgstr "Đŕçđŕáîňęŕ, Áŕçč-äŕííč"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Đŕçđŕáîňęŕ, Číňĺăđčđŕíŕ ńđĺäŕ"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Đŕçđŕáîňęŕ, Ńňŕíäŕđňíč číńňđóěĺíňč"
-
-#~ msgid "Directory"
-#~ msgstr "Äčđĺęňîđč˙"
-
-#~ msgid "Disable"
-#~ msgstr "Čçęëţ÷č"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Čçęëţ÷âŕíĺ íŕ Číňĺđíĺň âđúçęŕ"
-
-#~ msgid "Disable network"
-#~ msgstr "Čçęëţ÷âŕíĺ íŕ ěđĺćŕňŕ"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Îňâúđçâŕíĺ îň Číňĺđíĺň "
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Îňâúđçâŕíĺňî îň Číňĺđíĺň čçâúđřĺíî."
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Îňâúđçâŕíĺňî îň Číňĺđíĺň íĺ óńď˙."
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Čńęŕňĺ ëč äŕ ńúçäŕě ŕâňîěŕňč÷íî číńňŕëčđŕůŕ äčńęĺňŕ çŕ Linux đĺďëčęŕöč˙?"
-
-#~ msgid "ECI modem"
-#~ msgstr "Ěîäĺě ECI"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Čçęŕđâŕíĺ ńňđŕíčöŕňŕ ńëĺä ďĺ÷ŕň ?"
-
-#~ msgid "Enable"
-#~ msgstr "Âęëţ÷č"
-
-#~ msgid "Enable network"
-#~ msgstr "Âęëţ÷âŕíĺ íŕ ěđĺćŕňŕ"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Çŕäĺéńňâŕíĺ Num Lock-ŕ ďđč çŕđĺćäŕíĺ"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Âń˙ęŕ îďŕřęŕ çŕ ďĺ÷ŕň (ęúäĺňî ńĺ íŕńî÷âŕň đŕáîňčňĺ çŕ ďĺ÷ŕň) ńĺ íóćäŕĺ\n"
-#~ "îň čěĺ (îáčęíîâĺíî lp) č spool-äčđĺęňîđč˙ ńâúđçâŕíŕ ń íĺ˙. Ęîĺ\n"
-#~ "čěĺ íŕ äčđĺęňîđč˙ äŕ áúäĺ čçďîëçâŕíî çŕ ňŕçč îďŕřęŕ č ęŕę ńĺ ńâúđçŕí "
-#~ "ďđčíňĺđŕ ?"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Âńĺęč ďđčíňĺđ ńĺ íóćäŕĺ îň čěĺ (íŕďđčěĺđ, \"lp\").\n"
-#~ "Äđóăč ďŕđŕěĺňđč ęŕňî îďčńŕíčĺ íŕ ďđčíňĺđŕ čëč ěĺńňîďîëîćĺíčĺňî ěó ěîăŕň "
-#~ "äŕ\n"
-#~ "áúäŕň îďđĺäĺëĺíč. Ęŕęâî čěĺ äŕ áúäĺ čçďîëçâŕíî çŕ ňîçč ďđčíňĺđ č\n"
-#~ "ęŕę ĺ ńâúđçŕí ňîé ?"
-
-#~ msgid "Expand all"
-#~ msgstr "Đŕçřčđč âńč÷ęî"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Äîďúëíčňĺëíč GhostScript îďöčč"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Äîďúëíčňĺëíč îďöčč çŕ ňĺęńň"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Ńúđâúđ, Ôŕéëîâ/Ďđčíňĺđĺí/Samba"
-
-#~ msgid "Find Package"
-#~ msgstr "Íŕěĺđč ďŕęĺň"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Íŕěĺđč ďŕęĺň ńúäúđćŕů ôŕéë"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Íŕěčđŕíĺ íŕ ëčńňŕňŕ"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Íŕěčđŕíĺňî íŕ ëčńňŕ îňíĺěŕ ěŕëęî âđĺěĺ"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Ďúđâč DNS ńúđâúđ"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Ďîďđŕâęŕ íŕ stair-stepping ňĺęńň ?"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Çŕ FTP č HTTP, ůĺ ňđ˙áâŕ äŕ äŕäĺňĺ ě˙ńňî çŕ hdlist\n"
-#~ "Ňî ňđ˙áâŕ äŕ ďđčëč÷ŕ íŕ URL-ňî îňăîđĺ"
-
-#~ msgid "Format all"
-#~ msgstr "Ôîđěŕňčđŕé âńč÷ęî"
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux ěîćĺ äŕ ďîääúđćŕ í˙ęîëęî ňčďŕ ďđčíňĺđč. Âńĺęč îň ňĺçč ňčďîâĺ\n"
-#~ "čçčńęâŕ đŕçëč÷íŕ óńňŕíîâęŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî ďđčíňĺđúň ĺ ôčçč÷ĺńęč ńâúđçŕí ęúě ęîěďţňúđŕ âč, čçáĺđĺňĺ \"Ëîęŕëĺí\n"
-#~ "ďđčíňĺđ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî čńęŕňĺ äîńňúď äî ďđčíňĺđ íŕěčđŕů ńĺ íŕ îňäŕëĺ÷ĺíŕ Unix ěŕřčíŕ, "
-#~ "čçáĺđĺňĺ\n"
-#~ "\"Îňäŕëĺ÷ĺí ďđčíňĺđ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî čńęŕňĺ äîńňúď äî ďđčíňĺđ íŕěčđŕů ńĺ íŕ îňäŕëĺ÷ĺíŕ Microsoft Windows "
-#~ "ěŕřčíŕ\n"
-#~ "(čëč íŕ Unix ěŕřčíŕ čçďîëçâŕůŕ SMB ďđîňîęîë), čçáĺđĺňĺ \"SMB/Windows "
-#~ "95/98/NT\"."
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Äŕéňĺ čěĺ (íŕďđ.: `extra', `commercial')"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ďđĺěŕőâŕíĺ íŕ çŕďčńŕ %s"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Îáđŕáîňęŕ íŕ ăđŕôčęŕ"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Ęŕę čńęŕňĺ äŕ ńĺ ńâúđćĺňĺ ęúě Číňĺđíĺň ?"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Íŕěĺđĺő ISDN ęŕđňŕ:\n"
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Ŕęî íĺůî íĺ ĺ íŕđĺä ń íŕńňđîéęŕňŕ íŕ X, čçďîëçâŕéňĺ ňĺçč îďöčč çŕ\n"
-#~ "ďđŕâčëíŕ íŕńňđîéęŕ íŕ X Window ńčńňĺěŕňŕ."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ŕęî íĺ ńňĺ ńčăóđíč äŕëč číôîđěŕöč˙ňŕ ďî-ăîđĺ ĺ â˙đíŕ\n"
-#~ "čëč ŕęî íĺ çíŕĺňĺ čëč íĺ ńňĺ ńčăóđíč ęŕęâî äŕ âúâĺäĺňĺ, â˙đíŕ číôîđěŕöč˙\n"
-#~ "ěîćĺ äŕ áúäĺ âçĺňŕ îň Číňĺđíĺň äîńňŕâ÷čęŕ âč. Ŕęî íĺ âúâĺäĺňĺ číôîđěŕöč˙ "
-#~ "çŕ\n"
-#~ "DNS (name server), ň˙ ůĺ áúäĺ âçĺňŕ îň Číňĺđíĺň äîńňŕâ÷čęŕ âč ďî âđĺěĺ "
-#~ "íŕ\n"
-#~ "ńâúđçâŕíĺ."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Ŕęî čěŕňĺ âńč÷ęč CD-ňŕ îň ńďčńúęŕ ďî-ăîđĺ, íŕňčńíĺňĺ Ok. Ŕęî í˙ěŕňĺ\n"
-#~ "íčňî ĺäíî îň ňĺçč CD-ňŕ, íŕňčńíĺňĺ Îňě˙íŕ. Ŕęî âč ëčďńâŕň í˙ęîč CD-ňŕ, "
-#~ "čçęëţ÷ĺňĺ ăč,\n"
-#~ "č íŕňčńíĺňĺ Ok."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ŕęî ďđĺäďî÷čňŕňĺ äŕ čçďîëçâŕňĺ ăđŕôč÷íî âëčçŕíĺ, čçáĺđĺňĺ \"Äŕ\". Â\n"
-#~ "ďđîňčâĺí ńëó÷ŕé, čçáĺđĺňĺ \"Íĺ\"."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ŕęî ůĺ čçďîëçâŕňĺ proxy ńúđâúđč, ěîë˙, íŕńňđîéňĺ ăč ńĺăŕ. Ŕęî íĺçíŕĺňĺ,\n"
-#~ "ďîďčňŕéňĺ ěđĺćîâč˙ ŕäěčíčńňđŕňîđ čëč Číňĺđíĺň äîńňŕâ÷čęŕ ńč."
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Ŕęî čńęŕňĺ äđóăč ĺçčöč (îńâĺí ňîçč, ęîéňî čçáđŕőňĺ ďđĺäč\n"
-#~ "íŕ÷ŕëîňî íŕ číńňŕëŕöč˙ňŕ), ęîčňî äŕ áúäŕň äîńňúďíč ńëĺä číńňŕëŕöč˙ňŕ, "
-#~ "ěîë˙, čçáĺđĺňĺ\n"
-#~ "ăč îň ńďčńúęŕ ďî-ăîđĺ. Ŕęî čńęŕňĺ äŕ ăč čçáĺđĺňĺ âńč÷ęč, ďđîńňî čçáĺđĺňĺ "
-#~ "\"Âńč÷ęč\"."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Ŕęî čńęŕňĺ äŕ ěîćĺňĺ äŕ ďĺ÷ŕňŕňĺ, ěîë˙, čçáĺđĺňĺ ńčńňĺěŕ çŕ ďĺ÷ŕň "
-#~ "čçěĺćäó\n"
-#~ "CUPS č LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS ĺ íîâŕ, ěîůíŕ č ăúâęŕâŕ ńčńňĺěŕ çŕ ďĺ÷ŕň çŕ Unix ńčńňĺěč (CUPS\n"
-#~ "ďđîčçëčçŕ îň \"Îáůŕ Unix Ďŕ÷ŕňíŕ Ńčńňĺěŕ\"). Ňîâŕ ĺ ńčńňĺěŕňŕ çŕ ďĺ÷ŕň ďî "
-#~ "ďîäđŕçáčđŕíĺ â\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR ĺ ńňŕđŕňŕ ńčńňĺěŕ çŕ ďĺ÷ŕň, čçďîëçâŕíŕ ďđĺäčříčňĺ Mandrake Linux "
-#~ "äčńňđčáóöčč.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî í˙ěŕňĺ ďđčíňĺđ, öúęíĺňĺ \"Íčęŕęúâ\"."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Ŕęî čńęŕňĺ äŕ ńâúđćčňĺ ęîěďţňúđŕ ńč ęúě Číňĺđíĺň čëč ęúě\n"
-#~ "ëîęŕëíŕ ěđĺćŕ, ěîë˙, čçáĺđĺňĺ ďîäőîä˙ůŕňŕ îďöč˙. Ěîë˙, âęëţ÷ĺňĺ "
-#~ "óńňđîéńňâîňî\n"
-#~ "ďđĺäč äŕ čçáĺđĺňĺ ďîäőîä˙ůŕňŕ îďöč˙, çŕ äŕ ďîçâîëčňĺ íŕ DrakX äŕ ăî "
-#~ "çŕńĺ÷ĺ ŕâňîěŕňč÷íî.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî í˙ěŕňĺ íčęŕęâŕ âđúçęŕ ęúě Číňĺđíĺň čëč ęúě ëîęŕëíŕ ěđĺćŕ, čçáĺđĺňĺ\n"
-#~ "\"Čçęëţ÷âŕíĺ íŕ ěđĺćŕňŕ\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî čńęŕňĺ äŕ íŕńňđîčňĺ ěđĺćŕňŕ ďî-ęúńíî, ńëĺä číńňŕëŕöč˙ňŕ, čëč ńňĺ "
-#~ "ďđčęëţ÷čëč ń íŕńňđîéęŕňŕ íŕ ěđĺćŕňŕ, čçáĺđĺňĺ \"Ăîňîâî\"."
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Ŕęî ADSL ěîäĺěúň âč ĺ Alcatel, čçáĺđĺňĺ Alcatel. Číŕ÷ĺ, čçáĺđĺňĺ ECI."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Ŕęî ěîäĺěúň âč ĺ âúířĺí, ěîćĺ, âęëţ÷ĺňĺ ăî ńĺăŕ, çŕ äŕ ďîçâîëčňĺ íŕ DrakX "
-#~ "äŕ ăî çŕńĺ÷ĺ ŕâňîěŕňč÷íî."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Ŕęî ěđĺćŕňŕ âč čçďîëçâŕ LDAP (čëč NIS) ďîđîňęîë çŕ ŕóňîđčçŕöč˙, čçáĺđĺňĺ\n"
-#~ "\"LDAP\" (čëč \"NIS\") çŕ ŕóňîđčçŕöč˙. Ŕęî íĺ çíŕĺňĺ, ďîďčňŕéňĺ ěđĺćîâč˙ "
-#~ "ńč\n"
-#~ "ŕäěčíčńňđŕňîđ.\n"
-#~ "\n"
-#~ "Ŕęî ęîěďţňúđúň âč íĺ ĺ ńâúđçŕí ęúě ŕäěčíčńňđčđŕíŕ ěđĺćŕ, ěîćĺ áč ůĺ "
-#~ "čńęŕňĺ\n"
-#~ "äŕ čçáĺđĺňĺ \"Ëîęŕëíč ôŕéëîâĺ\" çŕ ŕóňîđčçŕöč˙."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ŕęî ěđĺćŕňŕ âč čçďîëçâŕ NIS, čçáĺđĺňĺ \"Čçďîëçâŕé NIS\". Ŕęî íĺ çíŕĺňĺ,\n"
-#~ "ďîďčňŕéňĺ ěđĺćîâč˙ ŕäěčíčńňđŕňîđ."
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Â ęî˙ ńňđŕíŕ ńĺ íŕěčđŕňĺ ?"
-
-#~ msgid "Installed packages"
-#~ msgstr "Číńňŕëčđŕíč ďŕęĺňč"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Číňĺđíĺň Číńňđóěĺíňč"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Číňĺđíĺň/Ěđĺćîâ äîńňúď"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Ăëŕâíčňĺ îďöčč íŕ LILO č GRUB ńŕ:\n"
-#~ " - Boot óńňđîéńňâî: Îďđĺäĺë˙ čěĺňî íŕ óńňđîéńňâîňî (ň.ĺ. ä˙ë îň őŕđä\n"
-#~ "äčńęŕ), ęîéňî ńúäúđćŕ boot ńĺęňîđŕ. Čçáĺđĺňĺ \"/dev/hda\", îńâĺí ŕęî íĺ\n"
-#~ "ńňĺ ńčăóđíč â äđóăî.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Čç÷ŕęâŕíĺ ďđĺäč ńňŕđňčđŕíĺ íŕ ďîäđŕçáčđŕůč˙ ńĺ îáđŕç: Îďđĺäĺë˙ "
-#~ "äĺńĺňčňĺ\n"
-#~ "îň ńĺęóíäŕňŕ, ęîčňî çŕđĺćäŕůŕ ďđîăđŕěŕ äŕ čç÷ŕęŕ ďđĺäč ďóńęŕíĺňî íŕ "
-#~ "ďúđâč˙\n"
-#~ "îáđŕç. Ďîëĺçíî ĺ çŕ ńčńňĺěč, ęîčňî ńňŕđňčđŕň îň äčńęŕ âĺäíŕăŕ ńëĺä "
-#~ "âęëţ÷âŕíĺ\n"
-#~ "íŕ ęëŕâčŕňóđŕňŕ. Çŕđĺćäŕůŕňŕ ďđîăđŕěŕ íĺ ÷ŕęŕ, ŕęî \"delay\" ĺ\n"
-#~ "ďđîďóńíŕň čëč ĺ íóëŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Âčäĺî đĺćčě: Ňîâŕ îďđĺäĺë˙ ňĺęńňîâč˙ VGA đĺćčě, ęîéňî äŕ áúäĺ čçáđŕí\n"
-#~ "ďđč íŕ÷ŕëíî çŕđĺćäŕíĺ. Âúçěîćíč ńŕ ńëĺäíčňĺ ńňîéíîńňč:\n"
-#~ " * normal: čçáčđŕ îáčęíîâĺí 80x25 ňĺęńňîâ đĺćčě.\n"
-#~ "\n"
-#~ " * <number>: čçďîëçâŕ ńúîňâĺňíč˙ ňĺęńňîâ đĺćčě.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ďî÷čńňâŕíĺ íŕ \"/tmp\" ďđč çŕđĺćäŕíĺ: ŕęî čńęŕňĺ äŕ ńĺ čçňđčâŕň "
-#~ "âńč÷ęč\n"
-#~ "ôŕéëîâĺ č äčđĺęňîđčč ńúőđŕí˙âŕíč â \"/tmp\", ęîăŕňî çŕđĺćäŕňĺ ńčńňĺěŕňŕ "
-#~ "ńč,\n"
-#~ "čçáĺđĺňĺ ňŕçč îďöč˙.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ňî÷íî RAM, ŕęî ĺ íóćíî: çŕ ńúćŕëĺíčĺ, í˙ěŕ ńňŕíäŕđňĺí ěĺňîä, äŕ ńĺ\n"
-#~ "ďîďčňŕ BIOS çŕ îáĺěŕ íŕ RAM â ęîěďţňúđŕ. Ęŕňî ďîńëĺäńňâčĺ, GNU/Linux "
-#~ "ěîćĺ\n"
-#~ "äŕ íĺ óńďĺĺ äŕ çŕńĺ÷ĺ ďđŕâčëíî îáĺěŕ íŕ RAM. Ŕęî ĺ ňŕęúâ ńëó÷ŕ˙, ňóę\n"
-#~ "ěîćĺňĺ äŕ çŕäŕäĺňĺ ňî÷íč˙ îáĺě íŕ RAM. Ěîë˙, îňáĺëĺćĺňĺ ÷ĺ îň 2 čëč 4 MB\n"
-#~ "ěĺćäó çŕńĺ÷ĺíŕňŕ č ďđčńúńňâŕůŕňŕ RAM ĺ íîđěŕëíŕ."
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Ëîęŕëíŕňŕ ěđĺćŕ âĺ÷ĺ ĺ íŕńňđîĺíŕ.\n"
-#~ "Čńęŕňĺ ëč äŕ:"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Äîďúëíčňĺëíč"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Äîďúëíčňĺëíč âúďđîńč"
-
-#~ msgid "Modify printer"
-#~ msgstr "Ďîďđŕâč ďđčíňĺđ"
-
-#~ msgid "Name of queue"
-#~ msgstr "Čěĺ íŕ îďŕřęŕ"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Čěĺ íŕ ńúçäŕâŕíč˙ ďđîôčë:"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Íŕáëţäŕâŕíĺ íŕ ěđĺćŕňŕ"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Ěđĺćîâ ďđčíňĺđ 1 (eth0):"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Í˙ěŕ CDROM (í˙ěŕ íčůî â /mnt/cdrom)"
-
-#~ msgid "No match"
-#~ msgstr "Í˙ěŕ ńúâďŕäĺíč˙"
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Íĺ áĺřĺ îňęđčň ěîäĺě. Ěîë˙, ďîńî÷ĺňĺ ńĺđčéíč˙ ďîđň, ęúě ęîéňî ĺ ńâúđçŕí.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çŕ číôîđěŕöč˙, ďúđâč˙ň ńĺđčĺí ďîđň (íŕđč÷ŕí \"COM1\" ďîä Microsoft\n"
-#~ "Windows) ńĺ íŕđč÷ŕ \"ttyS0\" ďîä Linux."
-
-#~ msgid "No more match"
-#~ msgstr "Í˙ěŕ ďîâĺ÷ĺ ńúâďŕäĺíč˙"
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ńĺăŕ ĺ âđĺěĺ äŕ íŕńňđîčňĺ X Window System, ęî˙ňî ĺ ˙äđîňî íŕ \n"
-#~ "GNU/Linux GUI (Ăđŕôč÷ĺí Ďîđĺáčňĺëńęč Číňĺđôĺéń). Çŕ ňŕçč öĺë ňđ˙áâŕ äŕ\n"
-#~ "íŕńňđîčňĺ âčäĺîęŕđňŕňŕ č ěîíčňîđŕ ńč. Ďî-ăîë˙ěŕňŕ ÷ŕńň îň ńňúďęčňĺ ńŕ\n"
-#~ "ŕâňîěŕňčçčđŕíč, ňŕęŕ ÷ĺ đŕáîňŕňŕ âč ěîćĺ áč ůĺ ńĺ ńúńňîč ńŕěî îň "
-#~ "ďđîâĺđęŕ\n"
-#~ "ęŕęâî ĺ íŕďđŕâĺíî č ďđčĺěŕíĺňî íŕ íŕńňđîéęčňĺ :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęîăŕňî íŕńňđîéęŕňŕ çŕâúđřč, X ůĺ áúäĺ ńňŕđňčđŕí (îńâĺí ŕęî íĺ óęŕćĺňĺ íŕ\n"
-#~ "DrakX äŕ íĺ ăî ďđŕâč), çŕ äŕ ďđîâĺđčňĺ äŕëč íŕńňđîéęčňĺ âč óńňđîéâŕň. "
-#~ "Ŕęî\n"
-#~ "íĺ âč óńňđîéâŕň, ěîćĺňĺ äŕ ńĺ âđúůŕňĺ č äŕ ăč ďđîěĺí˙ňĺ, ęîëęîňî ďúňč âč\n"
-#~ "ĺ íĺîáőîäčěî."
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Ńĺăŕ, ńëĺä ęŕňî Číňĺđíĺň âđúçęŕňŕ âč ĺ íŕńňđîĺíŕ,\n"
-#~ "ęîěďţňúđúň âč ěîćĺ äŕ áúäĺ íŕńňđîĺí íŕ ńďîäĺë˙ Číňĺđíĺň âđúçęŕňŕ ńč.\n"
-#~ "Îňáĺëĺćĺňĺ: çŕ ňîâŕ âč ňđ˙áâŕ óńňŕíîâĺí îňäĺëĺí ěđĺćîâ ŕäŕďňĺđ, çŕ äŕ "
-#~ "óńňŕíîâčňĺ âúňđĺříŕňŕ ńč ěđĺćŕ (LAN).\n"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Áđîé ńňđŕíčöč çŕ čçőîäíč ńňđŕíčöč"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Îňâŕđ˙íĺ íŕ âđúçęŕňŕ âč ..."
-
-#~ msgid "Other countries"
-#~ msgstr "Äđóăč ńňđŕíč"
-
-#~ msgid "Package"
-#~ msgstr "Ďŕęĺňŕ"
-
-#~ msgid "Paper Size"
-#~ msgstr "Đŕçěĺđ íŕ őŕđňč˙ňŕ"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Čçáĺđĺňĺ ďđĺäďî÷čňŕí ĺçčę çŕ číńňŕëŕöč˙ č ńčńňĺěíî čçďîëçâŕíĺ."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Ěîë˙, čçáĺđĺňĺ ďîäőîä˙ůč çŕ ďđčíňĺđŕ âč íŕńňîéęč.\n"
-#~ "Ěîë˙, ďîăëĺäíĺňĺ äîęóěĺíňŕöč˙ňŕ, ŕęî íĺ çíŕĺňĺ ęŕęâî äŕ čçáĺđĺňĺ ňóę.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ůĺ ěîćĺňĺ äŕ čçďđîáâŕňĺ íŕńňđîéęŕňŕ â ńëĺäâŕůŕňŕ ńňúďęŕ č äŕ ˙ ńěĺíčňĺ, "
-#~ "ŕęî íĺ đŕáîňč ęŕęňî ňđ˙áâŕ."
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Ěîë˙, čçďđŕňĺňĺ ńëĺäíŕňŕ číôîđěŕöč˙"
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Ěîë˙, âęëţ÷ĺňĺ ěîäĺěŕ ńč č čçáĺđĺňĺ ďîäőîä˙ůč˙."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ " other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Location: if you want to put some information on your\n"
-#~ " printer location, put it here (you are free to write what\n"
-#~ " you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Ěîë˙, âęëţ÷ĺňĺ ďđčíňĺđŕ ńč ďđĺäč äŕ ďđîäúëćčňĺ, çŕ äŕ ďîçâîëčňĺ íŕ DrakX "
-#~ "äŕ\n"
-#~ "ăî çŕńĺ÷ĺ.\n"
-#~ "\n"
-#~ "Ňđ˙áâŕ äŕ âúâĺäĺňĺ í˙ęŕęâŕ číôîđěŕöč˙ ňóę.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Čěĺ íŕ ďđčíňĺđ: ďî ďîäđŕçáčđŕíĺ, ďĺ÷ŕňíč˙ spooler čçďîëçâŕ \"lp\" "
-#~ "ęŕňî čěĺ íŕ ďđčíňĺđ. Ňŕęŕ ÷ĺ ňđ˙áâŕ äŕ čěŕňĺ\n"
-#~ "ďđčíňĺđ íŕđĺ÷ĺí \"lp\".\n"
-#~ " Ŕęî čěŕňĺ ńŕěî ĺäčí ďđčíňĺđ, ěîćĺňĺ äŕ čçďîëçâŕňĺ í˙ęîëęî čěĺíŕ çŕ "
-#~ "íĺăî. Ňđ˙áâŕ ńŕěî äŕ ăč îňäĺëčňĺ ń pipe\n"
-#~ " ńčěâîëŕ (\"|\"). Ňŕęŕ ÷ĺ, ŕęî ďđĺäďî÷čňŕňĺ ďî-ńěčńëĺíî čěĺ, ěîćĺňĺ "
-#~ "äŕ ăî ńëîćčňĺ ďúđâî, íŕďđ. \"My printer|lp\".\n"
-#~ " Ďđčíňĺđúň ńúäúđćŕů \"lp\" â čěĺňî(ŕňŕ) ńč ůĺ ńĺ ďîëçâŕ ďî "
-#~ "ďîäđŕçáčđŕíĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Îďčńŕíčĺ: Ňîâŕ ĺ íĺçŕäúëćčňĺëíî, íî ěîćĺ äŕ ĺ ďîëĺçíî, ŕęî čěŕ "
-#~ "í˙ęîëęî ďđčíňĺđŕ ńâúđçŕíč ęúě ęîěďţňúđŕ âč čëč ŕęî\n"
-#~ " đŕçđĺřŕâŕňĺ äîńňúď äî íĺăî íŕ äđóăč ęîěďţňđč.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Ěĺńňîďîëîćĺíčĺ: ŕęî čńęŕňĺ äŕ äŕäĺňĺ číôîđěŕöč˙ çŕ ěĺńňîďîëîćĺíčĺňî\n"
-#~ " íŕ ďđčíňĺđŕ ńč, íŕďđŕâĺňĺ ăî ňóę (ěîćĺňĺ äŕ íŕďčřĺňĺ ęŕęâîňî ńč "
-#~ "čńęŕňĺ,\n"
-#~ " íŕďđčěĺđ \"2-đč ĺňŕć\").\n"
-
-#~ msgid "Press next to continue."
-#~ msgstr "Íŕňčńíĺňĺ Ńëĺäâŕů, çŕ äŕ ďđîäúëćčňĺ."
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Ďĺ÷ŕňŕé ňĺęńňŕ ęŕňî PostScript ?"
-
-#~ msgid "Profile "
-#~ msgstr "Ďđîôčë "
-
-#~ msgid "Provider dns 1"
-#~ msgstr "1-âč DNS íŕ äîńňŕâ÷čęŕ"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "2-đč DNS íŕ äîńňŕâ÷čęŕ"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, áčáëčîňĺęč, číńňđóěĺíňč"
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ńęîđîńň íŕ ďđčĺěŕíĺ: "
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Ďđĺíŕńňđîé čçďîëçâŕéęč ěŕăüîńíčę ..."
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Reload"
-#~ msgstr "Ďđĺçŕđĺćäŕíĺ"
-
-#~ msgid "Remote queue"
-#~ msgstr "Îňäŕëĺ÷ĺíî čěĺ íŕ îďŕřęŕ"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Ëčďńâŕ čěĺ íŕ îďŕřęŕňŕ !"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Îáúđíč đĺäŕ íŕ ńňđŕíčöčňĺ"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Äĺńĺí/Ë˙â úăúë â ňî÷ęč (1/72 íŕ čí÷)"
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO ĺ bootloader çŕ SPARC: ňoé ěîćĺ äŕ ńňŕđňčđŕ\n"
-#~ "GNU/Linux čëč ęî˙ äŕ ĺ äđóăŕ îďĺđŕöčîííŕ ńčńňĺěŕ, ńúůĺńňâóâŕůŕ íŕ "
-#~ "ęîěďţňúđŕ âč.\n"
-#~ "Îáčęíîâĺííî, ňĺçč äđóăč îďĺđŕöčîííč ńčńňĺěŕ ńĺ çŕńč÷ŕň č číńňŕëčđŕň\n"
-#~ "ďđŕâčëíî. Ŕęî ňîâŕ íĺ ńňŕâŕ ďđč âŕń, ěîćĺňĺ äŕ äîáŕâ˙ňĺ çŕďčńč íŕ đúęŕ â\n"
-#~ "ňîçč ĺęđŕí. Ăëĺäŕéňĺ äŕ čçáĺđĺňĺ âĺđíč ďŕđŕěĺňđč.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ěîćĺ äŕ íĺ čńęŕňĺ äŕ äŕâŕňĺ äîńňúď äî ňĺçč îďĺđŕöčîííč ńčńňĺěč íŕ íčęîé,\n"
-#~ "â ęîéňî ńëó÷ŕé ěîćĺňĺ äŕ čçňđčĺňĺ ńúîňâĺňíčňĺ çŕďčńč. Íî â ňŕęúâ ńëó÷ŕé,\n"
-#~ "ůĺ ńĺ íóćäŕĺňĺ îň boot-äčńęĺňŕ, çŕ äŕ ăč ńňŕđňčđŕňĺ !"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ " - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Ăëŕâíčňĺ îďöčč íŕ SILO ńŕ:\n"
-#~ " - bootloader číńňŕëŕöč˙: ďîęŕçâŕ, ęúäĺňî čńęŕňĺ äŕ ďîńňŕâčňĺ "
-#~ "číôîđěŕöč˙ňŕ\n"
-#~ "íĺîáőîäčěŕ çŕ ńňŕđňčđŕíĺňî íŕ GNU/Linux. Îńâĺí ŕęî íĺ çíŕĺňĺ ňî÷íî ęŕęâî\n"
-#~ "ďđŕâčňĺ, čçáĺđĺňĺ \"Ďúđâč ńĺęňîđ íŕ óńňđîéńňâîňî (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Čç÷ŕęâŕíĺ ďđĺäč ńňŕđňčđŕíĺ íŕ ďîäđŕçáčđŕůč˙ ńĺ îáđŕç: Îďđĺäĺë˙ "
-#~ "äĺńĺňčňĺ\n"
-#~ "îň ńĺęóíäŕňŕ, ęîčňî çŕđĺćäŕůŕ ďđîăđŕěŕ äŕ čç÷ŕęŕ ďđĺäč ďóńęŕíĺňî íŕ "
-#~ "ďúđâč˙\n"
-#~ "îáđŕç. Ďîëĺçíî ĺ çŕ ńčńňĺěč, ęîčňî ńňŕđňčđŕň îň äčńęŕ âĺäíŕăŕ ńëĺä ęŕňî\n"
-#~ "ńĺ âęëţ÷č ęëŕâčŕňóđŕňŕ. Çŕđĺćäŕůŕňŕ ďđîăđŕěŕ íĺ ÷ŕęŕ, ŕęî \"delay\" ĺ\n"
-#~ "ďđîďóńíŕň čëč ĺ íóëŕ."
-
-#~ msgid "Sciences"
-#~ msgstr "Íŕóęč"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Íŕó÷íč ďđčëîćĺíč˙"
-
-#~ msgid "Search"
-#~ msgstr "Ňúđńč"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Âňîđč DNS ńúđâúđ"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Čçáĺđĺňĺ âđúçęŕ ęúě îňäŕëĺ÷ĺíč˙ ďđčíňĺđ"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Čçáĺđĺňĺ đŕçěĺđŕ, ęîéňî čńęŕňĺ äŕ číńňŕëčđŕě"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Čçáĺđĺňĺ:\n"
-#~ "\n"
-#~ " - Ńďĺöčŕëčçčđŕíŕ: Ŕęî ńňĺ äîńňŕňú÷íî çŕďîçíŕň ń GNU/Linux, ůĺ ěîćĺňĺ äŕ "
-#~ "čçáĺđĺňĺ\n"
-#~ " ăëŕâíîňî ďđĺäíŕçíŕ÷ĺíčĺ íŕ ěŕřčíŕňŕ ńč. Âčćňĺ ďî-äîëó çŕ "
-#~ "ďîäđîáíîńňč.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ĺęńďĺđňíŕ: Ňîâŕ ďđĺäďîëŕăŕ, ÷ĺ ńňĺ íŕ \"ňč\" ń GNU/Linux č čńęŕňĺ äŕ\n"
-#~ " íŕďđŕâčňĺ âčńîęî ńďĺöčŕëčçčđŕíŕ číńňŕëŕöč˙. Ęŕęňî č â "
-#~ "\"Ńďĺöčŕëčçčđŕíč˙\"\n"
-#~ " číńňŕëŕöčîíĺí ęëŕń, ůĺ ěîćĺňĺ äŕ čçáĺđĺňĺ óďîňđĺáŕňŕ íŕ ńčńňĺěŕňŕ "
-#~ "ńč.\n"
-#~ " Íî ěîë˙, ěîë˙, ÍĹ ČÇÁČĐŔÉŇĹ ŇÎÂŔ, ÎŃÂĹÍ ŔĘÎ ÍĹ ÇÍŔĹŇĹ ĘŔĘÂÎ ĎĐŔÂČŇĹ!"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Čçáĺđĺňĺ ăîëĺěčíŕ %d%s"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Ńęîđîńň íŕ čçďđŕůŕíĺ: "
-
-#~ msgid "Show only leaves"
-#~ msgstr "Ďîęŕćč ńŕěî ëčńňŕňŕ"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Ńëîâŕřęŕ (Ďđîăđŕěčńňč)"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Ńúćĺë˙âŕě, íŕńňđîéęŕňŕ íŕ ďîůŕňŕ îůĺ íĺ ĺ âúâĺäĺíŕ. Áúäĺňĺ ňúđďĺëčâč."
-
-#~ msgid "Sort by"
-#~ msgstr "Ńîđňčđŕé ďî"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spool-äčđĺęňîđč˙"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Statistics"
-#~ msgstr "Ńňŕňčńňčęč"
-
-#~ msgid "Test the mouse here."
-#~ msgstr "Čçďđîáâŕéňĺ ěčřęŕňŕ ńč ňóę."
-
-#~ msgid ""
-#~ "The Mandrake Linux spreads among several CDROMs. It may be that drakX "
-#~ "has\n"
-#~ "selected packages on another CDROM than the installation CDROM, and when "
-#~ "it\n"
-#~ "needs that you put another one into the drive, it will eject the current "
-#~ "CDROM\n"
-#~ "and ask you for another one."
-#~ msgstr ""
-#~ "Mandrake Linux ĺ đŕçďîëîćĺí íŕ í˙ęîëęî CDROM-ŕ. Ěîćĺ äŕ ńĺ îęŕćĺ, ÷ĺ "
-#~ "DrakX\n"
-#~ "ĺ čçáđŕë ďŕęĺňč íŕ CDROM, đŕçëč÷ĺí îň číńňŕëŕöčîííč˙ CDROM, č, ęîăŕňî ěó\n"
-#~ "ďîňđ˙áâŕ äŕ ăî ńëîćčňĺ â óńňđîéńňâîňî, ňîé ůĺ čçęŕđŕ ňĺęóůč˙ CDROM č ůĺ "
-#~ "âč\n"
-#~ "ďîčńęŕ äđóă."
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ńëĺäíčňĺ ďŕęĺňč ůĺ áúäŕň äĺčíńňŕëčđŕíč"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Ňîçč ńňŕđňîâ ńęđčďň ńĺ îďčňâŕ äŕ çŕđĺäč ěîäóëč usb ěčřęŕňŕ âč."
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Çŕ ďî-ńčăóđíŕ ńčńňĺěŕ, ňđ˙áâŕ äŕ čçáĺđĺňĺ \"Čçďîëçâŕé shadow ôŕéë\"\n"
-#~ "č \"Čçďîëçâŕé MD5 ďŕđîëč\"."
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Ďđĺâęëţ÷âŕíĺ ěĺćäó Číńňŕëčđŕí č Íŕëč÷ĺí"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Ăîđĺí/Äîëĺí úăúë â ňî÷ęč (1/72 íŕ čí÷)"
-
-#~ msgid "Tree"
-#~ msgstr "Äúđâî"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Äŕ ńĺ îďčňŕě ëč äŕ îňęđč˙ ěîäĺě ?"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL íŕ äčđĺęňîđč˙ňŕ ńúäúđćŕůŕ RPM"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Îďöčč çŕ Uniprint äđŕéâĺđ"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Íĺđŕçďîçíŕň íŕńňđîéâŕů ôŕéë"
-
-#~ msgid "Update location"
-#~ msgstr "Îáíîâč ě˙ńňîňî"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Îáíîâ˙âŕíĺ íŕ RPM áŕçŕňŕ"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Čçďîëçâŕé MD5 ďŕđîëč"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Čçďîëçâŕé diskdrake"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Čçďîëçâŕé shadow ôŕéë"
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Äîáđĺ äîřëč â Ěŕăüîńíčęŕ çŕ ěđĺćîâŕ íŕńňđîéęŕ.\n"
-#~ "Ęîč ęîěďîíĺíňč čńęŕňĺ äŕ íŕńňđîčňĺ ?\n"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Ęŕęâî ňúđń˙ň?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Çŕ ęŕęâî ńĺ óďîňđĺá˙âŕ ńčńňĺěŕňŕ âč ?"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Ęŕęâŕ ďđîăđŕěŕ çŕ íŕ÷ŕëíî çŕđĺćäŕíĺ čńęŕňĺ äŕ čçďîëçâŕňĺ?"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Ęîé ôŕéë ňúđńčňĺ?"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Ęîé ďŕęĺň ňúđń˙ň"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Ęúě ęîé ńĺđčĺí ďîđň ĺ ńâúđçŕíŕ ěčřęŕňŕ âč ?"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Ń îňäŕëĺ÷ĺí CUPS ńúđâúđ, íĺ âč ńĺ íŕëŕăŕ äŕ íŕńňđîéâŕňĺ ęŕęúâňî\n"
-#~ "č äŕ áčëî ďđčíňĺđ ňóę; ďđčíňĺđčňĺ ńŕěč ůĺ áúäŕň çŕńĺ÷ĺíč,\n"
-#~ "îńâĺí ŕęî í˙ěŕňĺ ńúđâúđ íŕ äđóăŕ ěđĺćŕ; â ďîńëĺäíč˙ ńëó÷ŕé,\n"
-#~ "ůĺ ňđ˙áâŕ äŕ ďđĺäîńňŕâčňĺ IP ŕäđĺń č ĺâĺíňóŕëíî ďîđň íŕ\n"
-#~ "CUPS ńúđâúđŕ."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Çŕďčřč /etc/fstab"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Äŕ, îňďĺ÷ŕňŕé ASCII ňĺńňîâŕ ńňđŕíčöŕ"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Äŕ, îňďĺ÷ŕňŕé PostScript ňĺńňîâŕ ńňđŕíčöŕ"
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Ěîćĺňĺ äŕ čçáĺđĺňĺ íčâî íŕ ńčăóđíîńň íŕ ńčńňĺěŕňŕ ńč. Ěîë˙, îáúđíĺňĺ ńĺ "
-#~ "ęúě đúęîâîäńňâîňî çŕ\n"
-#~ "číôîđěŕöč˙. Íŕęđŕňęî, ŕęî íĺ çíŕĺňĺ ęŕęâî äŕ čçáĺđĺňĺ, îńňŕâĺňĺ ňîâŕ ďî "
-#~ "ďîäđŕçáčđŕíĺ.\n"
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Ěîćĺňĺ äŕ íŕńňđîčňĺ ëîęŕëĺí ďđčíňĺđ (ńâúđçŕí ęúě ěŕřčíŕňŕ âč) čëč "
-#~ "îňäŕëĺ÷ĺí\n"
-#~ "ďđčíňĺđ (äîńňúďĺí ÷đĺç Unix, Netware čëč Microsoft Windows ěđĺćŕ)."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Ěîćĺňĺ äŕ číńňŕëčđŕňĺ ęđčďňîăđŕôńęč ďŕęĺňč, ŕęî Číňĺđíĺň âđúçęŕňŕ âč ĺ\n"
-#~ "íŕňđîĺíŕ ęŕęňî ňđ˙áâŕ. Ďúđâî čçáĺđĺňĺ îăëĺäŕëĺí ńŕéň, îň ęúäĺňî čçęŕňĺ äŕ "
-#~ "čçňĺăë˙ňĺ\n"
-#~ "ďŕęĺňč, ńëĺä ňîâŕ ěŕđęčđŕéňĺ ďŕęĺňčňĺ çŕ číńňŕëčđŕíĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Îňáĺëĺćĺňĺ, ÷ĺ ňđ˙áâŕ äŕ čçáĺđĺňĺ îăëĺäŕëĺí ńŕéň č ęđčďňîăđŕôńęč ďŕęĺňč,\n"
-#~ "ńúîáđŕçíî âŕřĺňî çŕęîíîäŕňĺëńňâî."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ čçáĺđĺňĺ ďîîňäĺëíî âńč÷ęč ďŕęĺňč, ęîčňî\n"
-#~ "čńęŕňĺ äŕ číńňŕëčđŕňĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ěîćĺňĺ äŕ đŕçřčđčňĺ čëč ńâčĺňĺ äúđâîňî, ęŕňî öúęíĺňĺ íŕ îďöččňĺ â ëĺâč˙ "
-#~ "úăúë\n"
-#~ "íŕ ďđîçîđĺöŕ ń ďŕęĺňčňĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî ďđĺäďî÷čňŕňĺ äŕ âčäčňĺ ďŕęĺňčňĺ ďîäđĺäĺíč â ŕçáó÷ĺí đĺä, öúęíĺňĺ íŕ\n"
-#~ "čęîíŕňŕ \"Ďđĺâęëţ÷âŕíĺ ěĺćäó íĺńîđňčđŕíč č ńîđňčđŕíč ďî ăđóďč\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî íĺ čńęŕňĺ äŕ áúäĺňĺ ďđĺäóďđĺćäŕâŕíč çŕ çŕâčńčěîńňč, öúęíĺňĺ "
-#~ "\"Ŕâňîěŕňč÷íč çŕâčńčěîńňč\".\n"
-#~ "Ŕęî íŕďđŕâčňĺ ňîâŕ, îňáĺëĺćĺňĺ ÷ĺ čçęëţ÷âŕíĺňî íŕ ĺäčí ďŕęĺň ěîćĺ "
-#~ "ňčőîěúëęîě\n"
-#~ "äŕ čçęëţ÷č í˙ęîč äđóăč ďŕęĺňč, ęîčňî çŕâčń˙ň îň íĺăî."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ âúâĺäĺňĺ root ďŕđîëŕňŕ íŕ Mandrake Linux ńčńňĺěŕňŕ.\n"
-#~ "Ďŕđîëŕňŕ ňđ˙áâŕ äŕ áúäĺ âúâĺäĺäŕ äâŕ ďúňč çŕ ďđîâĺđęŕ, ÷ĺ ďŕđîëčňĺ ńŕ "
-#~ "čäĺíňč÷íč.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root ĺ ńčńňĺěíč˙ň ŕäěčíčńňđŕňîđ čëč ĺäčíńňâĺíč˙ ďîňđĺáčňĺë, íŕ ęîéňî ĺ "
-#~ "ďîçâîëĺíî\n"
-#~ "äŕ ďîďđŕâ˙ íŕńňđîéâŕůčňĺ ôŕéëîâĺ. Çŕňîâŕ čçáĺđĺňĺ ďŕđîëŕňŕ âíčěŕňĺëíî.\n"
-#~ "Íĺďîçâîëĺíŕ óďîňđĺáŕ íŕ root ŕęŕóíňŕ ěîćĺ äŕ áúäĺ čçęëęţ÷čňĺëíî îďŕńíî çŕ "
-#~ "öĺëîńňňŕ\n"
-#~ "íŕ ńčńňĺěŕňŕ, äŕííčňĺ č č äđóăčňĺ ńčńňĺěč ńâúđçŕíč ęúě íĺ˙.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ďŕđîëŕňŕ ňđ˙áâŕ äŕ ĺ ńěĺńčöŕ îň ŕçáó÷íč ńčěâîëč č äŕ ĺ äúëăŕ íŕé-ěŕëęî 8\n"
-#~ "ńčěâîëŕ. Íčęîăŕ íĺ ňđ˙áâŕ äŕ ńč ˙ çŕďčńâŕňĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Íĺ ďđŕâĺňĺ ďŕđîëŕňŕ ďđĺęŕëĺíî äúëăŕ čëč ńëîćíŕ, âúďđĺęč ňîâŕ: ňđ˙áâŕ äŕ "
-#~ "ěîćĺňĺ\n"
-#~ "äŕ ˙ çŕďîěíčňĺ áĺç ěíîăî óńčëč˙."
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ " chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ " you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ " your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ " specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ " present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ " typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ " select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ " should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ čçáĺđĺňĺ í˙ęîč äîďúëíčňĺëíč îďöčč çŕ ńčńňĺěŕňŕ ńč.\n"
-#~ "\n"
-#~ "* Čçďîëçâŕíĺ îďňčěčçŕöčč çŕ ňâúđäč˙ äčńę: ňŕçč îďöč˙ ěîćĺ äŕ ďîäîáđč "
-#~ "đŕáîňŕňŕ íŕ ňâúđäč˙ âč äčńęŕ, íî ĺ ńŕěî çŕ íŕďđĺäíŕëč\n"
-#~ " ďîňĺđĺáčňĺëč: í˙ęîč íĺäîä˙ëŕíč ÷čďńĺňč ěîăŕň äŕ ńúńčď˙ň äŕííčňĺ âč, "
-#~ "ňŕęŕ ÷ĺ âíčěŕâŕéňĺ. Îňáĺëĺćĺňĺ, ÷ĺ ˙äđîňî čěŕ\n"
-#~ " âăđŕäĺí ÷ĺđĺí ńďčńúę îň óńňđîéńňâŕ č ÷čďńĺňč, íî, ŕęî čńęŕňĺ äŕ "
-#~ "čçáĺăíĺňĺ ëîřč čçíĺíŕäč, îńňŕâĺňĺ ňŕçč îďöč˙ čçęëţ÷ĺíŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Čçáĺđĺňĺ íčâî íŕ ńčăóđíîńň: ěîćĺňĺ äŕ čçáĺđĺňĺ íčâî íŕ ńčăóđíîńň çŕ "
-#~ "ńčńňĺěŕňŕ\n"
-#~ " ńč. Ěîë˙, îáúđíĺňĺ ńĺ ęúě đúęîâîäńňâîňî çŕ ďúëíŕ číôîđěŕöč˙. Ďđîńňî, "
-#~ "ŕęî\n"
-#~ " íĺ çíŕĺňĺ ęŕęâî äŕ čçáĺđĺňĺ, îńňŕâĺňĺ ňîâŕ ďî ďîäđŕçáčđŕíĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ňî÷íî RAM, ŕęî ĺ íóćíî: çŕ ńúćŕëĺíčĺ, í˙ěŕ ńňŕíäŕđňĺí ěĺňîä, äŕ ńĺ "
-#~ "ďîďčňŕ BIOS çŕ îáĺěŕ íŕ RAM â ęîěďţňúđŕ. Ęŕňî\n"
-#~ " ďîńëĺäńňâčĺ, GNU/Linux ěîćĺ äŕ íĺ óńďĺĺ äŕ çŕńĺ÷ĺ ďđŕâčëíî îáĺěŕ íŕ "
-#~ "RAM. Ŕęî ĺ ňŕęúâ ńëó÷ŕ˙, ňóę ěîćĺňĺ äŕ\n"
-#~ " çŕäŕäĺňĺ ňî÷íč˙ îáĺě íŕ RAM. Ěîë˙, îňáĺëĺćĺňĺ ÷ĺ îň 2 čëč 4 MB ěĺćäó "
-#~ "çŕńĺ÷ĺíŕňŕ č ďđčńúńňâŕůŕňŕ RAM ĺ íîđěŕëíŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ŕâňîěŕňč÷íî ěîíňčđŕíĺ íŕ ďđĺíîńčěč óńňđîéńňâŕ: ŕęî ďđĺäďî÷čňŕňĺ äŕ íĺ "
-#~ "ěîíňčđŕňĺ đú÷íî ďđĺíîńčěč óńňđîéńňâŕ (CD-ROM,\n"
-#~ " ôëîďč, Zip č ň.í.) ďčřĺéęč \"mount\" č \"umount\", čçáĺđĺňĺ ňŕçč "
-#~ "îďöč˙.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ďî÷čńňâŕíĺ íŕ \"/tmp\" ďđč çŕđĺćäŕíĺ: ŕęî čńęŕňĺ äŕ ńĺ čçňđčâŕň âńč÷ęč "
-#~ "ôŕéëîâĺ č äčđĺęňîđčč ńúőđŕí˙âŕíč â \"/tmp\",\n"
-#~ " ęîăŕňî çŕđĺćäŕňĺ ńčńňĺěŕňŕ ńč, čçáĺđĺňĺ ňŕçč îďöč˙.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Âęëţ÷âŕíĺ íŕ NumLock ďđč çŕđĺćäŕíĺ: ŕęî čńęŕňĺ äŕ ńĺ âęëţ÷âŕ NumLock "
-#~ "ďđč ńňŕđňčđŕíĺ, čçáĺđĺňĺ ňŕçč îďöč˙. Ěîë˙, îňáĺëĺćĺňĺ ÷ĺ\n"
-#~ " íĺ ňđ˙áâŕ äŕ âęëţ÷âŕňĺ ňŕçč îďöč˙ ďđč ëŕďňîďč č ÷ĺ ěîćĺ č äŕ íĺ đŕáîňč "
-#~ "ďîä X)."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ńĺăŕ ěîćĺňĺ äŕ ďîńî÷čňĺ âđĺěĺâŕňŕ çîíŕ ńďđ˙ěî ěĺńňîćčâĺĺíĺňî ńč."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ čçďđîáâŕňĺ ěčřęŕňŕ ńč. Čçďîëçâŕéňĺ áóňîíŕ č ňîď÷ĺňî, çŕ "
-#~ "äŕ\n"
-#~ "ďđîâĺđčňĺ äŕëč íŕńňđîéęčňĺ ńŕ íŕđĺä. Ŕęî íĺ, ěîćĺňĺ äŕ öúęíĺňĺ \"Îňě˙íŕ"
-#~ "\",\n"
-#~ "çŕ äŕ čçáĺđĺňĺ äđóă äđŕéâĺđ."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons. This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ čçďđîáâŕňĺ ěčřęŕňŕ ńč. Čçďîëçâŕéňĺ áóňîíčňĺ č ęîëĺëöĺňî, "
-#~ "çŕ\n"
-#~ "äŕ ďđîâĺđčäŕ äŕëč íŕńňđîéęčňĺ ńŕ íŕđĺä. Ŕęî íĺ ńŕ, öúęíĺňĺ íŕ \"Îňęŕç\", "
-#~ "çŕ\n"
-#~ "äŕ čçáĺđĺňĺ äđóă äđŕéâĺđ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî číńňŕëčđŕňĺ íŕ Apple ěŕřčíŕ ń ĺäíîáóňîííŕ ěčřęŕ, ůĺ čěŕňĺ âúçěîćíîńň "
-#~ "äŕ\n"
-#~ "îďđĺäĺëčňĺ ęëŕâčřč îň ęëŕâčŕňóđŕňŕ, äŕ ńčěóëčđŕň 2-đč č 3-ňč áóňîí íŕ\n"
-#~ "ěčřęŕňŕ. Ňîâŕ ůĺ âč äŕäĺ äîńňúď äî ďúëíŕňŕ ôóíęöčîíŕëíîńň íŕ ěčřęŕňŕ â "
-#~ "Linux\n"
-#~ "ęîíçîëŕňŕ, č â X Windows GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ŕęî čěŕňĺ ADB ěčřęŕ, ěîë˙, čçáĺđĺňĺ USB, ňúé ęŕňî Linux ˙äđîňî ůĺ ńĺ "
-#~ "ďîăđčćč\n"
-#~ "äŕ čçďîëçâŕ ěčřęŕňŕ ęŕęňî ňđ˙áâŕ."
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Ěîćĺňĺ äŕ îďđĺäĺëčňĺ íŕďđŕâî URI çŕ äîńňúď äî ďđčíňĺđŕ ń CUPS."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ " * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ " You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ " ask your network administrator.\n"
-#~ "\n"
-#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ " \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ íŕńňđîčňĺ ěđĺćîâîňî ńč óńňđîéńňâî.\n"
-#~ "\n"
-#~ " * IP ŕäđĺń: ŕęî íĺ çíŕĺňĺ čëč íĺ ńňĺ ńčăóđíč ęŕęâî äŕ âúâĺäĺňĺ, "
-#~ "ďîďčňŕéňĺ ěđĺćîâčĺ ńč ŕäěčíčńňđŕňîđ.\n"
-#~ " Íĺ ňđ˙áâŕ äŕ âúâĺćäŕňĺ IP ŕäđĺń, ŕęî čçáĺđĺňĺ îďöč˙ňŕ \"Ŕâňîěŕňč÷íî IP"
-#~ "\", ďî-äîëó.\n"
-#~ "\n"
-#~ " * Ěđĺćîâŕ ěŕńęŕ: \"255.255.255.0\" îáčęíîâĺííî ĺ äîáúđ čçáîđ. Ŕęî íĺ "
-#~ "çíŕĺňĺ čëč íĺ ńňĺ ńčăóđíč ęŕęâî äŕ âúâĺäĺňĺ, ďîďčňŕéňĺ ěđĺćîâč˙ ńč "
-#~ "ŕäěčíčńňđŕňîđ.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Ŕâňîěŕňč÷íî IP: Ŕęî ěđĺćŕňŕ âč čçďîëçâŕ BOOTP čëč DHCP ďđîňîęîë, "
-#~ "čçáĺđĺňĺ ňŕçč îďöč˙. Ŕęî ĺ čçáĺđŕíŕ, íĺ ńĺ íóćäŕĺňĺ\n"
-#~ " îň ńňîéíîńň çŕ \"IP ŕäđĺń\". Ŕęî íĺ çíŕĺňĺ čëč íĺ ńňĺ ńčăóđíč ęŕęâî "
-#~ "ňđ˙áâŕ äŕ âúâĺäĺňĺ, ďîďčňŕéňĺ ěđĺćîâč˙ ńč ŕäěčíčńňđŕňîđ."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ ńúçäŕäĺňĺ ĺäčí čëč ďîâĺ÷ĺ \"îáčęíîâĺíč\" ďîňđĺáčňĺëńęč\n"
-#~ "ŕęŕóíňč, ęŕňî ďđîňčâîďîëîćíîńň íŕ \"ďđčâčëĺăčđîâŕíč˙\" ďîňđĺáčňĺëńęč\n"
-#~ "ŕęŕóíň \"root\". Ěîćĺňĺ äŕ ńúçäŕäĺňĺ ďî ĺäčí čëč ďîâĺ÷ĺ çŕ âńĺęč, ęîéňî\n"
-#~ "áčőňĺ čńęŕëč äŕ ďîëçâŕ ęîěďţňúđŕ âč. Îňáĺëĺćĺňĺ ÷ĺ âńĺęč ŕęŕóíň ůĺ čěŕ\n"
-#~ "ńâîčňĺ ďđĺäďî÷čňŕíč˙ (ăđŕôč÷íŕ ńđĺäŕ, ďđîăđŕěíč íŕńňđîéęč č ň.í.)\n"
-#~ "č äŕ íŕńňđîč ńâî˙ňŕ \"Home\" äčđĺęňîđč˙, ęúäĺňî äŕ çŕďčńâŕ ňĺçč\n"
-#~ "ńâîč ďđĺäďî÷čňŕíč˙.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ďúđâî ńúçäŕéňĺ ŕęŕóíň çŕ ńĺáĺ ńč. Äŕćĺ č äŕ ńňĺ ĺäčíńňâĺíč˙ň ďîňđĺáčňĺë,\n"
-#~ "čçďîëçâŕíĺňî íŕ ŕäěčíčńňđŕňîđńęč˙ ŕęŕóíň çŕ âńĺęčäíĺâíŕ óďîňđĺáŕ ĺ "
-#~ "îďŕńíî.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çŕňîâŕ âëčçŕéňĺ ń ďîňđĺáčňĺëńęč˙ ńč ŕęŕóíň â ńčńňĺěŕňŕ č, ńŕěî ŕęî âč ńĺ\n"
-#~ "íŕëîćč, čçďîëçâŕéňĺ ŕäěčíčńňđŕňîđńęč˙ ŕęŕóíň."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ âúâĺäĺňĺ dialup îďöččňĺ. Ŕęî íĺ çíŕĺňĺ\n"
-#~ "čëč íĺ ńňĺ ńčăóđíč ęŕęâî äŕ âúâĺäĺňĺ, ďîäőîä˙ůŕ číôîđěŕöč˙ ěîćĺ äŕ áúäĺ "
-#~ "âçĺňŕ\n"
-#~ "îň Číňĺđíĺň äîńňŕâ÷čęŕ âč. Ŕęî íĺ âúâĺäĺňĺ číôîđěŕöč˙ çŕ DNS (name "
-#~ "server)\n"
-#~ "ňóę, ňŕçč číôîđěŕöč˙ ůĺ áúäĺ âçĺňŕ Číňĺđíĺň äîńňŕâ÷čęŕ âč ďî âđĺěĺ íŕ\n"
-#~ "ńâúđçâŕíĺ."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ âúâĺäĺňĺ îďöččňĺ çŕ íŕáčđŕíĺ. Ŕęî íĺ ńňĺ ńčăóđíč,\n"
-#~ "ďđŕâčëíŕ číôîđěŕöč˙ ěîćĺňĺ äŕ ďîëó÷čňĺ îň Číňĺđíĺň äîńňŕâ÷čęŕ ńč."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ âúâĺäĺňĺ čěĺňî íŕ őîńňŕ ńč. Ŕęî íĺ çíŕĺňĺ\n"
-#~ "čëč íĺ ńňĺ ńčăóđíč ęŕęâî äŕ âúâĺäĺňĺ, ďîďčňŕéňĺ ěđĺćîâč˙ ńč ŕäěčíčńňđŕňîđ."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ âúâĺäĺňĺ čěĺňî íŕ őîńňŕ ńč, ŕęî ňđ˙áâŕ. Ŕęî\n"
-#~ "íĺ çíŕĺňĺ čëč íĺ ńňĺ ńčăóđíč ęŕęâî äŕ âúâĺäĺňĺ, îńňŕâĺňĺ ăî ďđŕçíî."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ äŕ âúâĺäĺňĺ čěĺňî íŕ őîńňŕ ńč, ŕęî âč ňđ˙áâŕ. Ŕęî íĺ\n"
-#~ "çíŕĺňĺ čëč íĺ ńňĺ ńčăóđíč ęŕęâî ňđ˙áâŕ äŕ âúâĺäĺňĺ, ń ďđŕâčëíŕ "
-#~ "číôîđěŕöč˙\n"
-#~ "ěîćĺňĺ äŕ ńĺ ńäîáčĺňĺ îň Číňĺđíĺň äîńňŕâ÷čęŕ ńč."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ńĺăŕ ěîćĺňĺ ńŕ ěŕđęčđŕňĺ ăđóďŕ ďŕęĺňč, ęî˙ňî čńęŕňĺ äŕ\n"
-#~ "číńňŕëčđŕňĺ čëč îáíîâčňĺ.\n"
-#~ "\n"
-#~ "DrakX ůĺ ďđîâĺđč äŕëč čěŕňĺ äîńňŕňú÷íî ě˙ńňî çŕ číńňŕëčđŕíĺňî čě. Ŕęî "
-#~ "í˙ěŕňĺ,\n"
-#~ "ňîé ůĺ âč ďđĺäóďđĺäč çŕ ňîâŕ. Ŕęî čńęŕňĺ äŕ ďđîäúëćčňĺ âúďđĺęč ňîâŕ, ůĺ "
-#~ "ďđîäúëćč\n"
-#~ "číńňŕëŕöč˙ňŕ íŕ âńč÷ęč ěŕđęčđŕíč ăđóďč, íî ůĺ ďđîďóńíĺ ďî-ěŕëîâŕćíčňĺ "
-#~ "ďŕęĺňč.\n"
-#~ "Â äúíîňî íŕ ńďčńúęŕ ěîćĺňĺ äŕ ěŕđęčđŕňĺ îďöč˙ňŕ \"Číäčâčäóŕëĺí čçáîđ íŕ "
-#~ "ďŕęĺňč\";\n"
-#~ "â ňîçč ńëó÷ŕé, ůĺ ňđ˙áâŕ äŕ îáőîäčňĺ ďîâĺ÷ĺ îň 1000 ďŕęĺňŕ ..."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ńĺăŕ ňđ˙áâŕ äŕ îďđĺäĺëčňĺ ďđĺäíŕçíŕ÷ĺíčĺňî íŕ ěŕřčíŕňŕ ńč. Âúçěîćíîńňčňĺ "
-#~ "ńŕ:\n"
-#~ "\n"
-#~ "\t* Đŕáîňíŕ ńňŕíöč˙: ňîâŕ ĺ čäĺŕëíč˙ čçáîđ, ŕęî âúçíŕěĺđ˙âŕňĺ äŕ "
-#~ "čçďîëçâŕňĺ ěŕřčíŕňŕ ńč ăëŕâíî çŕ ĺćĺäíĺâíŕ óďîňđĺáŕ â\n"
-#~ "\t îôčńŕ čëč ó äîěŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Đŕçđŕáîňęŕ: ŕęî âúçíŕěĺđ˙âŕňĺ äŕ čçďîëçâŕňĺ ěŕřčíŕňŕ ńč ăëŕâíî çŕ "
-#~ "đŕçđŕáîňęŕ íŕ ńîôóĺđ, ňîâŕ ĺ äîáúđ čçáîđ.\n"
-#~ "\t Ňîăŕâŕ ůĺ čěŕňĺ číńňŕëčđŕí ďúëĺí íŕáîđ îň ńîôňóĺđ, çŕ äŕ ęîěďčëčđŕňĺ, "
-#~ "îňęđčâŕňĺ áúăîâĺ č ôîđěŕňčđŕňĺ čçőîäĺí ęîä,\n"
-#~ "\t čëč äŕ ńúçäŕâŕňĺ ńîôóĺđíč ďŕęĺňč.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Ńúđâúđ: ŕęî âúçíŕěĺđ˙âŕňĺ äŕ čçďîëçâŕňĺ ňŕçč ěŕřčíŕ çŕ ńúđâúđ, ňîâŕ ĺ "
-#~ "äîáđč˙ň čçáîđ. Âęëţ÷âŕ ôŕéëîâ ńúđâúđ\n"
-#~ "\t (NFS čëč SMB), ńúđâúđ çŕ ďĺ÷ŕň (Unix-ńęč čëč Microsoft Windows-ńęč), "
-#~ "ńúđâúđ çŕ ŕóňîđčçŕöč˙ (NIS), ńúđâúđ çŕ\n"
-#~ "\t áŕçč-äŕííč č ň.í.. Ęŕňî ňŕęúâ, íĺ î÷ŕęâŕéňĺ číńňŕëčđŕíč ęŕęâčňî č äŕ "
-#~ "ĺ řŕđčíčč (KDE, GNOME, č ň.í.)."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ " at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ " will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ " or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ " SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ " server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ńĺăŕ ňđ˙áâŕ äŕ îďđĺäĺëčňĺ ďđĺäíŕçíŕ÷ĺíčĺňî íŕ ěŕřčíŕňŕ ńč. Âúçěîćíîńňčňĺ "
-#~ "ńŕ:\n"
-#~ "\n"
-#~ "* Đŕáîňíŕ ńňŕíöč˙: ňîâŕ ĺ čäĺŕëíč˙ čçáîđ, ŕęî âúçíŕěĺđ˙âŕňĺ äŕ čçďîëçâŕňĺ "
-#~ "ěŕřčíŕňŕ ńč ăëŕâíî çŕ ĺćĺäíĺâíŕ óďîňđĺáŕ â\n"
-#~ " îôčńŕ čëč ó äîěŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Đŕçđŕáîňęŕ: ŕęî âúçíŕěĺđ˙âŕňĺ äŕ čçďîëçâŕňĺ ěŕřčíŕňŕ ńč ăëŕâíî çŕ "
-#~ "đŕçđŕáîňęŕ íŕ ńîôóĺđ, ňîâŕ ĺ äîáúđ čçáîđ.\n"
-#~ " Ňîăŕâŕ ůĺ čěŕňĺ číńňŕëčđŕí ďúëĺí íŕáîđ îň ńîôňóĺđ, çŕ äŕ ęîěďčëčđŕňĺ, "
-#~ "îňęđčâŕňĺ áúăîâĺ č ôîđěŕňčđŕňĺ čçőîäĺí ęîä,\n"
-#~ " čëč äŕ ńúçäŕâŕňĺ ńîôóĺđíč ďŕęĺňč.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Ńúđâúđ: ŕęî âúçíŕěĺđ˙âŕňĺ äŕ čçďîëçâŕňĺ ňŕçč ěŕřčíŕ çŕ ńúđâúđ, ňîâŕ ĺ "
-#~ "äîáđč˙ň čçáîđ. Âęëţ÷âŕ ôŕéëîâ ńúđâúđ\n"
-#~ " (NFS čëč SMB), ńúđâúđ çŕ ďĺ÷ŕň (Unix-ńęč čëč Microsoft Windows-ńęč), "
-#~ "ńúđâúđ çŕ ŕóňîđčçŕöč˙ (NIS), ńúđâúđ çŕ\n"
-#~ " áŕçč-äŕííč č ň.í.. Ęŕňî ňŕęúâ, íĺ î÷ŕęâŕéňĺ číńňŕëčđŕíč ęŕęâčňî č äŕ ĺ "
-#~ "řŕđčíčč (KDE, GNOME, č ň.í.)."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Ńĺăŕ ěîćĺňĺ äŕ čçáĺđĺňĺ ďđčíňĺđ îň ńďčńúęŕ ďî-ăîđĺ."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Ňđ˙áâŕ äŕ ďđčĺěĺňĺ óńëîâč˙ňŕ íŕ ëčöĺíçŕ ďî-ăîđĺ, çŕ äŕ ďđîäúëćč "
-#~ "číńňŕëŕöč˙ňŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Öúęíĺňĺ \"Ďđčĺěč\", ŕęî ńňĺ ńúăëŕńíč ń óńëîâč˙ňŕ ěó.\n"
-#~ "\n"
-#~ "\n"
-#~ "Öúęíĺňĺ \"Îňęŕćč\", ŕęî íĺ ńňĺ ńúăëŕńíč ń óńëîâč˙ňŕ ěó. Číńňŕëŕöč˙ňŕ ůĺ "
-#~ "ďđčęëţ÷č áĺç ďđîě˙íŕ íŕ íŕńňî˙ůŕňŕ\n"
-#~ "íŕńňđîéęŕ."
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ " \n"
-#~ " * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ " if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ " If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ " protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Ňđ˙áâŕ äŕ âúâĺäĺňĺ í˙ęŕęâŕ číôîđěŕöč˙ ňóę.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Čěĺ íŕ ďđčíňĺđ: ďî ďîäđŕçáčđŕíĺ, ďĺ÷ŕňíč˙ spooler čçďîëçâŕ \"lp\" "
-#~ "ęŕňî čěĺ íŕ ďđčíňĺđ. Ňŕęŕ ÷ĺ ňđ˙áâŕ äŕ čěŕňĺ\n"
-#~ "ďđčíňĺđ íŕđĺ÷ĺí \"lp\".\n"
-#~ " Ŕęî čěŕňĺ ńŕěî ĺäčí ďđčíňĺđ, ěîćĺňĺ äŕ čçďîëçâŕňĺ í˙ęîëęî čěĺíŕ çŕ "
-#~ "íĺăî. Ďđîńňî ňđ˙áâŕ äŕ ăč îňäĺëčňĺ ń pipe\n"
-#~ " ńčěâîëŕ (\"|\"). Ňŕęŕ ÷ĺ, ŕęî ďđĺäďî÷čňŕňĺ ďî-ńěčńëĺíî čěĺ, ěîćĺňĺ "
-#~ "äŕ ăî ńëîćčňĺ ďúđâî, íŕďđ. \"My printer|lp\".\n"
-#~ " Ďđčíňĺđúň ńúäúđćŕů \"lp\" â čěĺňî(ŕňŕ) ńč, ůĺ ńĺ ďîëçâŕ ďî "
-#~ "ďîäđŕçáčđŕíĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Spool äčđĺęňîđč˙: ňîâŕ ĺ äčđĺęňîđč˙ňŕ, ęúäĺňî ńĺ ńúőđŕí˙âŕň đŕáîňčňĺ "
-#~ "çŕ ďĺ÷ŕň. Îńňŕâĺňĺ ńňîéíîńňňŕ\n"
-#~ " ďî ďîäđŕçáčđŕíĺ, îńâĺí ŕęî íĺ çíŕĺňĺ ęŕęâî äŕ čçďîëçâŕňĺ\n"
-#~ "\n"
-#~ "\n"
-#~ " * Âđúçęŕ ęúě ďđčíňĺđ: Ŕęî ďđčíňĺđúň âč ĺ ôčçč÷ĺńęč ńâúđçŕí ęúě "
-#~ "ęîěďţňúđŕ âč, čçáĺđĺňĺ \"Ëîęŕëĺí ďđčíňĺđ\".\n"
-#~ " Ŕęî čńęŕňĺ äîńňúď äî ďđčíňĺđ íŕěčđŕů ńĺ íŕ îňäŕëĺ÷ĺíŕ Unix ěŕřčíŕ, "
-#~ "čçáĺđĺňĺ \"Îňäŕëĺ÷ĺí LPD ďđčíňĺđ\".\n"
-#~ "\n"
-#~ "\n"
-#~ " Ŕęî čńęŕňĺ äîńňúď äî ďđčíňĺđ íŕěčđŕů ńĺ íŕ îňäŕëĺ÷ĺíŕ Microsoft "
-#~ "Windows ěŕřčíŕ (čëč íŕ Unix ěŕřčíŕ ďîëçâŕůŕ SMB\n"
-#~ " ďđîňîęîë), čçáĺđĺňĺ \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " Ŕęî čńęŕňĺ äîńňúď äî ďđčíňĺđ íŕěčđŕů ńĺ íŕ NetWare ěđĺćŕ, čçáĺđĺňĺ "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Ďđčíňĺđúň âč áĺřĺ çŕńĺ÷ĺí. Ěîë˙, âúâĺäĺňĺ čěĺňî íŕ óńňđîéńňâîňî, íŕ "
-#~ "ęîĺňî\n"
-#~ "ĺ ńâúđçŕí.\n"
-#~ "\n"
-#~ "\n"
-#~ "Çŕ číôîđěŕöč˙, ďîâĺ÷ĺňî ďđčíňĺđč ńŕ ńâúđçŕíč íŕ ďúđâč˙ ďŕđŕëĺëĺí ďîđň. "
-#~ "Ňîçč\n"
-#~ "ńĺ íŕđč÷ŕ \"/dev/lp0\" ďîä GNU/Linux č \"LPT1\" ďîä Microsoft Windows."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ńčńňĺěŕňŕ âč ůĺ ńĺ đĺńňŕđňčđŕ.\n"
-#~ "\n"
-#~ "Ńëĺä ęŕňî đĺńňŕđňčđŕ, âŕřŕňŕ íîâŕ Mandrake Linux ńčńňĺěŕ ůĺ ńĺ çŕđĺäč\n"
-#~ "ŕâňîěŕňč÷íî. Ŕęî čńęŕňĺ äŕ ďóńíĺňĺ äđóăŕ ńúůĺńňâóâŕůŕ îďĺđŕöčîííŕ "
-#~ "ńčńňĺěŕ,\n"
-#~ "ďđî÷ĺňĺňĺ äîďúëíčňĺëíčňĺ číńňđóęöčč."
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "âńč÷ęč äŕííč âúđőó ň˙ő ůĺ áúäŕň çŕăóáĺíč"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "âíčěŕíčĺ: Â ŇÎÂŔ ÍČÂÎ ÍŔ ŃČĂÓĐÍÎŃŇ, ROOT ÂËČÇŔÍĹŇÎ ÍŔ ĘÎÍÇÎËŔŇŔ ÍĹ Ĺ "
-#~ "ĎÎÇÂÎËĹÍÎ !\n"
-#~ "Ŕęî čńęŕňĺ äŕ ńňĺ root, ňđ˙áâŕ äŕ âëĺçĺňĺ ęŕňî ďîňđĺáčňĺë č ňîăŕâŕ äŕ "
-#~ "čçďîëçâŕňĺ \"su\".\n"
-#~ "Ęŕňî ö˙ëî, íĺ î÷ŕęâŕéňĺ äŕ čçďîëçâŕňĺ ěŕřčíŕňŕ ńč çŕ íĺůî äđóăî, îńâĺí çŕ "
-#~ "ńúđâúđ.Á˙őňĺ ďđĺäóďđĺäĺí."
-
-#~ msgid "cannot fork: "
-#~ msgstr "íĺ ěîăŕ äŕ ńĺ îňäĺë˙: "
-
-#~ msgid "default"
-#~ msgstr "ďî ďîäđŕçáčđŕíĺ"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "íĺ čçďîëçâŕé PPPOE"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "Őîđčçîíňŕëíŕ äîáđĺ-čçăëĺćäŕůŕ aurora"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (âŕćĺí)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (äîáúđ)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (ěíîăî äîáúđ)"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "not connected"
-#~ msgstr "íĺ ńâúđçŕí"
-
-#~ msgid "received: "
-#~ msgstr "ďîëó÷ĺíč: "
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake ĺ â đĺćčě íŕ ``ěŕëęî ďŕěĺň''.\n"
-#~ "Ůĺ ďóńíŕ îňíîâî rpmdrake, çŕ äŕ đŕçđĺřŕ ňúđńĺíĺňî íŕ ôŕéëîâĺ"
-
-#~ msgid "sent: "
-#~ msgstr "čçďđŕňĺíč: "
-
-#~ msgid "using module"
-#~ msgstr "čçďîëçâŕíĺ íŕ ěîäóë"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "Îáčęíîâĺíŕ âĺđňčęŕëíŕ aurora"
-
-#~ msgid "yellow pages"
-#~ msgstr "ćúëňč ńňđŕíčöč"
diff --git a/perl-install/share/po/br.po b/perl-install/share/po/br.po
deleted file mode 100644
index f210d9039..000000000
--- a/perl-install/share/po/br.po
+++ /dev/null
@@ -1,12284 +0,0 @@
-# DrakX e Brezhoneg.
-# Copyright (C) 1999-2002 MandrakeSoft
-# Thierry Vignaud <tvignaud@mandrakesoft.com>, 1999-2002
-# JaĂą-Mai Drapier <jan-mai.drapier@mail.dotcom.fr>, 1999-2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 8.2\n"
-"POT-Creation-Date: 2002-06-13 15:54+0200\n"
-"PO-Revision-Date: 2002-01-28 22:41GMT\n"
-"Last-Translator: Thierry Vignaud <tvignaud@mandrakesoft.com>\n"
-"Language-Team: Brezhoneg <ofisk@wanadoo.fr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:244
-msgid "Use Xinerama extension"
-msgstr "Implijit Xinemara"
-
-#: ../../Xconfigurator.pm_.c:247
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Kefluniadur hep ken kartenn \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:250
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../Xconfigurator.pm_.c:251
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Graphics card"
-msgstr "Kartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:263
-msgid "Select a graphics card"
-msgstr "Diuzit ur gartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "Choose a X server"
-msgstr "Dibabit ur servijer X"
-
-#: ../../Xconfigurator.pm_.c:287
-msgid "X server"
-msgstr "servijer X"
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "Choose a X driver"
-msgstr "Dibabit ur sturier X"
-
-#: ../../Xconfigurator.pm_.c:294
-msgid "X driver"
-msgstr "Sturier X"
-
-#: ../../Xconfigurator.pm_.c:361 ../../Xconfigurator.pm_.c:367
-#: ../../Xconfigurator.pm_.c:417 ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:364
-#, fuzzy
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Pe seurt enmont a vennit ouzhpennaĂą"
-
-#: ../../Xconfigurator.pm_.c:375
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:377 ../../Xconfigurator.pm_.c:410
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:379 ../../Xconfigurator.pm_.c:412
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s gant 3D"
-
-#: ../../Xconfigurator.pm_.c:387 ../../Xconfigurator.pm_.c:401
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:389 ../../Xconfigurator.pm_.c:403
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:398
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:418
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:422
-msgid "XFree configuration"
-msgstr "Staliadur XFree86"
-
-#: ../../Xconfigurator.pm_.c:497
-msgid "Select the memory size of your graphics card"
-msgstr "Diuzit ment memor ho kartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:551
-msgid "Choose options for server"
-msgstr "Dibabit dibarzhoĂš ar servijer"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Choose a monitor"
-msgstr "Dibabit ur skramm"
-
-#: ../../Xconfigurator.pm_.c:575
-msgid "Monitor"
-msgstr "Skramm"
-
-#: ../../Xconfigurator.pm_.c:578
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"An div arventenn dreistpouezus a zo ar feur freskaat a-serzh, da lavaret eo "
-"ar\n"
-"feur ma vez freskaet ar skramm a-bezh, ha pouezusuc'h c'hoazh ar feur "
-"kempredaĂą\n"
-"a-led, da lavaret eo ar feur ma vez diskwelet linennoĂš skubaĂą.\n"
-"\n"
-"HOLLBOUEZHUS eo deoc'h na spisaat ur seurt skramm gant ur feur kempredaĂą\n"
-"a zo en tu-hont da varregezh ho skramm : gallout a rafe gwastaù ho skramm\n"
-" M'hoc'h eus douetaĂąs, dibabit ur c'hefluniadur fur."
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Horizontal refresh rate"
-msgstr "Feur freskaat a-led"
-
-#: ../../Xconfigurator.pm_.c:586
-msgid "Vertical refresh rate"
-msgstr "Feur freskaat a-serzh"
-
-#: ../../Xconfigurator.pm_.c:623
-msgid "Monitor not configured"
-msgstr "Skramm ket kefluniet"
-
-#: ../../Xconfigurator.pm_.c:626
-msgid "Graphics card not configured yet"
-msgstr "Kartenn c'hrafek ket kefluniet c'hoazh"
-
-#: ../../Xconfigurator.pm_.c:629
-msgid "Resolutions not chosen yet"
-msgstr "SpisterioĂš ket dibabet c'hoazh"
-
-#: ../../Xconfigurator.pm_.c:647
-msgid "Do you want to test the configuration?"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../Xconfigurator.pm_.c:651
-#, fuzzy
-msgid "Warning: testing this graphics card may freeze your computer"
-msgstr "Da ziwall : arvarus eo amprouiù ar gartenn c'hrafek-maù"
-
-#: ../../Xconfigurator.pm_.c:654
-msgid "Test of the configuration"
-msgstr "AmprouiĂą ar c'hefluniadur"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"klaskit kemmaĂą arventennoĂš 'zo"
-
-#: ../../Xconfigurator.pm_.c:693 ../../Xconfigurator.pm_.c:705
-msgid "An error occurred:"
-msgstr "C'hoarvezet eo ur fazi :"
-
-#: ../../Xconfigurator.pm_.c:734
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Kuitaat e %d eilenn"
-
-#: ../../Xconfigurator.pm_.c:745
-msgid "Is this the correct setting?"
-msgstr "Ha reizh eo ar c'hefluniadur ?"
-
-#: ../../Xconfigurator.pm_.c:754
-msgid "An error occurred, try to change some parameters"
-msgstr "C'hoarvezet eo ur fazi, klaskit kemmaĂą arventennoĂš 'zo"
-
-#: ../../Xconfigurator.pm_.c:825
-msgid "Resolution"
-msgstr "Spister"
-
-#: ../../Xconfigurator.pm_.c:877
-msgid "Choose the resolution and the color depth"
-msgstr "Dibabit ar spister ha donder al livioĂš"
-
-#: ../../Xconfigurator.pm_.c:879
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Kartenn c'hrafek : %s"
-
-#: ../../Xconfigurator.pm_.c:880
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servijer XFree86 : %s"
-
-#: ../../Xconfigurator.pm_.c:894 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-#, fuzzy
-msgid "More"
-msgstr "Dilec'hiaĂą"
-
-#: ../../Xconfigurator.pm_.c:894 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:701
-#: ../../my_gtk.pm_.c:1034 ../../my_gtk.pm_.c:1056
-#: ../../standalone/drakbackup_.c:2288 ../../standalone/drakbackup_.c:2359
-#: ../../standalone/drakbackup_.c:2375
-msgid "Ok"
-msgstr "Mat eo"
-
-#: ../../Xconfigurator.pm_.c:896 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2473 ../../standalone/drakfloppy_.c:146
-#: ../../standalone/draknet_.c:275 ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mod mailh"
-
-#: ../../Xconfigurator.pm_.c:897
-msgid "Show all"
-msgstr "Diskouez pep tra"
-
-#: ../../Xconfigurator.pm_.c:942
-msgid "Resolutions"
-msgstr "SpisterioĂš"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Reizhadur ar stokellaoueg : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Seurt logodenn : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Trobarzhell al logodenn : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skramm : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "KempredA-led ar skramm : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "FreskA-serzh ar skramm : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1518
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Kartenn c'hrafek : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Graphics card identification: %s\n"
-msgstr "Anavezoud kartenn c'hrafek : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Memor c'hrafek : %s ko\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Donder liv: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Spister: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1525
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servijer XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1526
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Sturier XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1544
-msgid "Preparing X-Window configuration"
-msgstr "O prientiĂą kefluniadur X-Window"
-
-#: ../../Xconfigurator.pm_.c:1564
-msgid "What do you want to do?"
-msgstr "Petra a vennit ober ? "
-
-#: ../../Xconfigurator.pm_.c:1569
-msgid "Change Monitor"
-msgstr "KemmaĂą ar skramm"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Graphics card"
-msgstr "KemmaĂą ar gartenn c'hrafek"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Change Server options"
-msgstr "KemmaĂą dibarzhoĂš ar servijer"
-
-#: ../../Xconfigurator.pm_.c:1574
-msgid "Change Resolution"
-msgstr "KemmaĂą ar spister"
-
-#: ../../Xconfigurator.pm_.c:1575
-msgid "Show information"
-msgstr "Diskouez titouroĂš"
-
-#: ../../Xconfigurator.pm_.c:1576
-msgid "Test again"
-msgstr "AmprouiĂą adarre"
-
-#: ../../Xconfigurator.pm_.c:1577 ../../printerdrake.pm_.c:2476
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Kuitaat"
-
-#: ../../Xconfigurator.pm_.c:1585
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr "Derc'hel ar c'hefluniadur IP o ren"
-
-#: ../../Xconfigurator.pm_.c:1606
-msgid "Graphical interface at startup"
-msgstr "X pa loc'her"
-
-#: ../../Xconfigurator.pm_.c:1607
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"KefluniaĂą ho urzhiataer evit laĂąsaĂą X ent emgefreek pa loc'ho a c'hellaĂą.\n"
-"Mennout a rit laĂąsaĂą X pa adloc'hit ?"
-
-#: ../../Xconfigurator.pm_.c:1613
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Adereit ouzh %s evit bevaat ar c'hemmoĂš mar plij"
-
-#: ../../Xconfigurator.pm_.c:1628
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Dizereit mar plij ha neuze implijit Ctrl-Alt-WarGil"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 liv (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil liv (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil liv (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milion a livioĂš (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliard a livioĂš (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mo pe vuioc'h"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA standard, 640x480 da 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Gour-VGA, 800x600 da 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Kenglotus 8514, 1024x768 da 87 Hz pebeilet (800x600 ebet)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Gour-VGA, 1024x768 da 87 Hz pebeilet, 800x600 da 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Gour-VGA astennet, 800x600 da 60 Hz, 640x480 da 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "G-VGA nann-pebeilet, 1024x768 da 60 Hz, 800x600 da 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "G-VGA talm uhel, 1024x768 da 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Lies-talm a c'hell ober 1280x1024 da 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Lies-talm a c'hell ober 1280x1024 da 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Lies-talm a c'hell ober 1280x1024 da 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skramm a c'hell ober 1600x1200 da 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skramm a c'hell ober 1600x1200 da 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Rann gentaĂą ar parzhadur loc'haĂą"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Rann gentaĂą ar bladenn (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Staliadur SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Pelec'h e mennit staliaĂą ar c'harger loc'haĂą ?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Staliadur LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO gant meuziad skrid"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO gant meuziad c'hrafek"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Loc'haĂą abaoe DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "DibarzhoĂš pennaĂą ar c'harger loc'haĂą"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "C'harger loc'haĂą da implijout"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Staliadur c'harger loc'haĂą"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Trobarzhell loc'haĂą"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne da ket en-dro gant BIOSoĂš kozh)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Fetis"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "fetis"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mod video"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Gedvezh kent loc'haĂą ar skeudenn dre ziouer"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1087 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:710 ../../printerdrake.pm_.c:808
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Tremenger"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1088
-msgid "Password (again)"
-msgstr "Tremenger (adarre)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Strishaat dibarzhoĂš al linenn urzhiaĂą"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "strishaat"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "SkaraĂą /tmp bep ma loc'her"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Spisait ment ar memor vev diouzh ret (kavet %d Mo)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Aotren lies trolinenn"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Roit ment ar memor vev e Mo"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Didalvout eo ``Strishaat dibarzhoĂš al linenn urzhiaĂą'' hep tremenger"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1143
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "Please try again"
-msgstr "Klaskit adarre mar plij"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1082
-msgid "The passwords do not match"
-msgstr "An tremegerioĂš ne glot ket"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "RK dre ziouer"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Setu da heul an enmontoĂš liesseurt.\n"
-"Gallout a rit ouzhpennaĂą lod pe gemmaĂą a re a zo."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:741
-#: ../../standalone/drakbackup_.c:850 ../../standalone/drakfont_.c:790
-#: ../../standalone/drakfont_.c:827
-msgid "Add"
-msgstr "OuzhpennaĂą"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Graet"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "KemmaĂą"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Pe seurt enmont a vennit ouzhpennaĂą"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:884
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "ReizhiadoĂš (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "ReizhiadoĂš (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "ReizhiadoĂš (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Skeudenn"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Gwrizienn"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "OuzhpennaĂą"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lenn-skrivaĂą "
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taolenn"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Arvarus"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Skridennad"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Dre ziouer"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Ment an Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "N'ev ket video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Dilemel an enmont"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Berzet eo ar skridennadoĂš goullo"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Ret eo deoc'h kaout ur parzhadur disloaĂą"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "En implij eo ar skridennad-se endeo"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Kavet etrefas %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Hag un all hoc'h eus ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Hag un etrefas %s bennak a zo ganeoc'h ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "No"
-msgstr "Ket"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1033
-msgid "Yes"
-msgstr "Ya"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Gwelet titouroĂš periantel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "O staliaĂą ur sturier evit kartenn %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(mollad %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pe sturier %s a zlefen amprouiĂą ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"E degouezhoĂš 'zo, ar sturier %s en deus ezhomm titouroĂš ouzhpenn evit mont\n"
-"en-dro reizh, daoust ma da en-dro mat hepto peurvuiaĂą. Ha mennout a rit "
-"spisaat\n"
-"dibaboĂš ouzphenn evitaĂą, pe aotren d'ar sturier amprouiĂą ho penvek evit\n"
-"an titouroĂš en deus ezhomm ? A-wechoĂš, amprouiĂą a c'hell sac'haĂą un "
-"urzhiataer,\n"
-"hogen ne raio reuz ebet."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "EmbrouiĂą"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Spisait dibarzhoĂš"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"BremaĂą e c'hellit pourvezaĂą e zibarzhoĂš d'ar mollad %s.\n"
-"Diouzh ar furmad ``anv=talvoud anv2=talvoud2...'' eo an dibaboĂš.\n"
-"Da skouer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "DibarzhoÚ ar mollad :"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"KargaĂą ar mollad %s a zo sac'het.\n"
-"Mennout a rit klask adarre gant arventennoĂš all ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ouzhpennet %s endeo)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Re eeun eo an tremeger"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Roit un anv arveriad mar plij"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"An anv arveriad a zle bezaĂą ennaĂą lizherennoĂš munut, sifroĂš, `-' ha `_' "
-"hepken"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "En implij eo an anv arveriad-se endeo"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "OuzhpennaĂą un arveriad"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Skrivit un arveriad\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aotren an arveriad"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Anv gwirion"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:709
-#: ../../printerdrake.pm_.c:807
-msgid "User name"
-msgstr "Anv arveriad"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Arlun"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"KefluniaĂą ho urzhiataer evit laĂąsaĂą X ent emgefreek pa loc'ho a c'hellaĂą.\n"
-"Mennout a rit laĂąsaĂą X pa adloc'hit ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Dibabit ar arveriad dre ziouer"
-
-#: ../../any.pm_.c:834
-#, fuzzy
-msgid "Choose the window manager to run:"
-msgstr "Dibabit ar benveg a vennit staliaĂą"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../any.pm_.c:851
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Gallout a rit dibab yezhoĂš all hag a vo hegerz goude staliaĂą"
-
-#: ../../any.pm_.c:865 ../../install_steps_interactive.pm_.c:689
-#: ../../standalone/drakxtv_.c:78
-msgid "All"
-msgstr "An holl"
-
-#: ../../any.pm_.c:957
-msgid "Allow all users"
-msgstr "AotreiĂą an holl dud"
-
-#: ../../any.pm_.c:957
-msgid "Custom"
-msgstr "PersonelaĂą"
-
-#: ../../any.pm_.c:957
-msgid "No sharing"
-msgstr "N'ev ket lodaĂą"
-
-#: ../../any.pm_.c:967 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Bremanaet e tle bezaĂą ar pabak-maĂą\n"
-"Ha sur oc'h e mennit e ziuzaĂą ?"
-
-#: ../../any.pm_.c:970
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm_.c:978 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:984
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:998 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:564
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:702 ../../my_gtk.pm_.c:705 ../../my_gtk.pm_.c:1034
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1588
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2254
-#: ../../standalone/drakbackup_.c:2279 ../../standalone/drakbackup_.c:2300
-#: ../../standalone/drakbackup_.c:2321 ../../standalone/drakbackup_.c:2339
-#: ../../standalone/drakbackup_.c:2387 ../../standalone/drakbackup_.c:2407
-#: ../../standalone/drakbackup_.c:2426 ../../standalone/drakfloppy_.c:235
-#: ../../standalone/drakfloppy_.c:384 ../../standalone/drakfont_.c:768
-#: ../../standalone/drakgw_.c:598 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:527
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "NullaĂą"
-
-#: ../../any.pm_.c:998
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:1000
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1037
-msgid "Welcome To Crackers"
-msgstr "Bezit deuet mat, preizherien !"
-
-#: ../../any.pm_.c:1038
-msgid "Poor"
-msgstr "Paour"
-
-#: ../../any.pm_.c:1039 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Skouer"
-
-#: ../../any.pm_.c:1040
-msgid "High"
-msgstr "Uhel"
-
-#: ../../any.pm_.c:1041
-#, fuzzy
-msgid "Higher"
-msgstr "Uhel"
-
-#: ../../any.pm_.c:1042
-msgid "Paranoid"
-msgstr "Ankeniet"
-
-#: ../../any.pm_.c:1045
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ret eo implijout al live-maĂą gant evezh. Ober a ra d'ho reizhiad bezaĂą\n"
-"aesoc'h da implijout, hogen kizidig-tre : arabat e implj evit un ardivink\n"
-"kevreet ouzh lod all pe ouzh ar genrouedad. N'eus ket a haeziĂą dre dremenger."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Gweredekaet eo bremaĂą an tremenger, hogen dierbedet eo c'hoazh an implij en "
-"ur rouedad"
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Setu al live surentez standard a vez erbedet evit un urzhiataer a vo "
-"implijet\n"
-"evit kevreaĂą evel arval ouzh ar Genrouedad. BremaĂą ez eus gwiriadennoĂš "
-"surentez."
-
-#: ../../any.pm_.c:1050
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1051
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Gant al live surentez-maĂą e teu posupl implijout ar reizhiad-maĂą evel ur "
-"servijer.\n"
-"Uhel a-walc'h eo bremaĂą ar surentez evit implijout ar reizhiad evel ur "
-"servijer\n"
-"o tigemer kevreadennoĂš a-berzh arvaloĂš niverus."
-
-#: ../../any.pm_.c:1054
-#, fuzzy
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Kemer a reomp arc'hweloĂš al live 4, hogen bremaĂą eo peurserret ar reizhiad.\n"
-"Arc'hweloĂš surentez a zo en o muiaĂą"
-
-#: ../../any.pm_.c:1059
-msgid "Please choose the desired security level."
-msgstr "Dibabit al live surentez"
-
-#: ../../any.pm_.c:1062
-msgid "Security level"
-msgstr "Live surentez"
-
-#: ../../any.pm_.c:1064
-msgid "Use libsafe for servers"
-msgstr "Implijit libsafe gant ar servijer"
-
-#: ../../any.pm_.c:1065
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../any.pm_.c:1067
-msgid "Security user (login or email)"
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:354
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Degemer mat e %s, an dibaber reizhiad oberian~ !\n"
-"\n"
-"Dibabit an dibaber reizhiad pe\n"
-"gortozit %d eilennoĂš\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:910
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Degemer mat e GRUB an dibaber reizhiad oberia¤ !"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:913
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Implijit ar stokelloĂš %c ha %c evit diuz pe enmont zo war wel"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:916
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stokit enkas evit loc'ha¤ ar RK diuzet, 'e' evit aoza¤ an"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:919
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "urzhiado— kent loc'ha¤, pe 'c' evit ul linenn-urzhia¤."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:922
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "An enmont war wel a vo loc'het ent emgefreek e %d eilenn."
-
-#: ../../bootloader.pm_.c:926
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1026
-msgid "Desktop"
-msgstr "Gorretaol"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1028
-msgid "Start Menu"
-msgstr "Meuziad LaĂąsaĂą"
-
-#: ../../bootloader.pm_.c:1047
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Pelec'h e mennit staliaĂą ar c'harger loc'haĂą ?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "N'ev ket skoazell.\n"
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Kefluniadur goude staliaĂą"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82
-#: ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Restr"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Restr/_Kuitaat"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/drakfloppy_.c:83
-#: ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr ""
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Skramm"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "KemmaĂą ar skramm"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Anv domani"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Trobarzhell loc'haĂą"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1457
-#: ../../standalone/drakbackup_.c:1468 ../../standalone/drakgw_.c:592
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "KefluniaĂą"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2431 ../../standalone/drakbackup_.c:3335
-#: ../../standalone/drakfloppy_.c:377 ../../standalone/drakfont_.c:537
-#: ../../standalone/drakfont_.c:658 ../../standalone/drakfont_.c:721
-#: ../../standalone/drakfont_.c:766 ../../standalone/draknet_.c:109
-#: ../../standalone/draknet_.c:141 ../../standalone/draknet_.c:297
-#: ../../standalone/draknet_.c:436 ../../standalone/draknet_.c:522
-#: ../../standalone/draknet_.c:565 ../../standalone/draknet_.c:666
-#: ../../standalone/logdrake_.c:520
-msgid "OK"
-msgstr "YA"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Go"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Ko"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mo"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "To"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d munutennoĂš"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 munutenn"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d eilenn"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "N'hellan ouzpennaĂą parzhadur ebet ken"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Gallout a rit dibab yezhoĂš all hag a vo hegerz goude staliaĂą"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../network/tools.pm_.c:113
-msgid "France"
-msgstr "Gall"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27 ../../network/tools.pm_.c:116
-msgid "Belgium"
-msgstr "Beljik"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tchek"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alaman"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Gres"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvegek"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suis"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34 ../../network/tools.pm_.c:114
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../network/tools.pm_.c:115
-#: ../../standalone/drakxtv_.c:74
-msgid "Italy"
-msgstr "Italian"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "a-steud"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67 ../../network/tools.pm_.c:117
-msgid "United States"
-msgstr "Amerika"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Gwarezit ho roadoĂš da gentaĂą mar plij"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:899
-#: ../../diskdrake/interactive.pm_.c:908 ../../diskdrake/interactive.pm_.c:962
-msgid "Read carefully!"
-msgstr "Lennit aketus !"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"M'emaoc'h e soĂąj implijout aboot, taolit evezh leuskel un egor dieub (2048 "
-"rann\n"
-"a zo a-walc'h) e deroĂš ar bladenn"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fazi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Skoazeller"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Dibabit un obererezh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Ur mell barzhadur FAT hoc'h eus\n"
-"(implijet gant MicroSoft Dos/Windows peurliesaĂą).\n"
-"AliaĂą a ran ouzoc'h adventaĂą ar parzhadur-se\n"
-"(klikit warni, da c'houde klikit war \"AdventaĂą\")"
-
-#
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Klikit war ur parzhadur mar plij"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "MunudoĂš"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "marc'haĂą sac'het"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "DisloaĂą"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1058
-msgid "Empty"
-msgstr "Goullo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:933
-msgid "Other"
-msgstr "All"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Seurt ar reizhiadoÚ restroÚ :"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "KrouiĂą"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Seurt"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Grit kentoc'h gant ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Dilemel"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Implijit ``Divarc'haĂą'' da gentaĂą"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Goude kemmaĂą seurt ar parzhadur %s, holl roadoĂš ar parzhadur-se a vo kollet"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Dibabit un parzhadur"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Dibabit un parzhadur all"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Kuitaat"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Tremen er mod mailh"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Tremen er mod boas"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Dizober"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Kenderc'hel evelato ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Kuitaat hep enrollaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Kuitaat hep skrivaĂą an daolenn barzhaĂą ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Ac'hubiĂą ent emgefreek"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "SkaraĂą an holl"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "DinoiĂą ar bladenn galet"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Ac'hubet eo an holl barzhadurioĂš kentaĂą renk"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "N'hellan ouzpennaĂą parzhadur ebet ken"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Evit kaout muioc'h a barzhadurioĂš, lamit unan evit ma c'hellot krouiĂą ur "
-"parzhadur astennet mar plij"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "SkrivaĂą an daolenn barzhaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Taolenn barzhaĂą saveteerezh"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Taolenn barzhaĂą saveteerezh"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Taolenn barzhaĂą saveteerezh"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Emvarc'haĂą ar skoroĂš lem/laka"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Diuzit ar restr"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"N'eo ket heĂąvel ment an daolenn barzhaĂą gwarezet\n"
-"Kenderc'hel memestra ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Ho evezh"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Lakait ur bladennig el lenner\n"
-"Kollet e vo holl roadoĂš ar bladennig-se"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "O klask assevel an daolenn barzhaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Diskouez titouroĂš"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:535
-#: ../../diskdrake/interactive.pm_.c:562 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Poent marc'haĂą"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-#, fuzzy
-msgid "Options"
-msgstr "Parzhadur"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:629
-msgid "Resize"
-msgstr "AdventaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:682
-msgid "Move"
-msgstr "Dilec'hiaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "FurmadiĂą"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Marc'haĂą"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "OuzhpennaĂą da RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "OuzhpennaĂą da LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Divarc'haĂą"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Lemel diwar RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Lemel diwar LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "KemmaĂą RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Implij da saveteiĂą"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "KrouiĂą ur parzhadur nevez"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Rann kregiù : "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:781
-msgid "Size in MB: "
-msgstr "Ment e Mo : "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:782
-msgid "Filesystem type: "
-msgstr "Seurt ar reizhiad restroÚ : "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1042
-#: ../../diskdrake/interactive.pm_.c:1116
-msgid "Mount point: "
-msgstr "Poent marc'haù : "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Dibarzh : "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "O furmadiĂą ar restr saveteiĂą %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "KemmaĂą seurt ar parzhadur"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:533
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Pelec'h e mennit marc'haĂą ar restr saveteiĂą %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:534 ../../diskdrake/interactive.pm_.c:561
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Pelec'h e mennit marc'haĂą an drobarzhell %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:540
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"N'hellan ket dizober ar poent marc'haĂą dre m'eo implijet ar parzhadur-se\n"
-"evit saveteiĂą. Lamit ar saveteiĂą da gentaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:585
-msgid "Computing FAT filesystem bounds"
-msgstr "O jediĂą bevennoĂš ar reizhiad restroĂš FAT"
-
-#: ../../diskdrake/interactive.pm_.c:585 ../../diskdrake/interactive.pm_.c:644
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Oc'h adventaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:617
-#, fuzzy
-msgid "This partition is not resizeable"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "All data on this partition should be backed-up"
-msgstr "Mat e vije gwareziĂą holl roadoĂš ar parzhadur-se"
-
-#: ../../diskdrake/interactive.pm_.c:624
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Goude adventaĂą ar parzhadur %s e vo kollet holl roadoĂš ar parzhadur-se"
-
-#: ../../diskdrake/interactive.pm_.c:629
-msgid "Choose the new size"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../diskdrake/interactive.pm_.c:630
-msgid "New size in MB: "
-msgstr "Ment nevez e Mo : "
-
-#: ../../diskdrake/interactive.pm_.c:683
-msgid "Which disk do you want to move it to?"
-msgstr "Da beseurt pladenn e mennit dilec'hiaĂą ?"
-
-#: ../../diskdrake/interactive.pm_.c:684
-msgid "Sector"
-msgstr "Rann"
-
-#: ../../diskdrake/interactive.pm_.c:685
-msgid "Which sector do you want to move it to?"
-msgstr "Da beseurt rann e mennit dilec'hiaĂą ?"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving"
-msgstr "O tilec'hiaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:688
-msgid "Moving partition..."
-msgstr "O tilec'hiaĂą ur parzhadur..."
-
-#: ../../diskdrake/interactive.pm_.c:705
-msgid "Choose an existing RAID to add to"
-msgstr "Dibabit da be RAID ouzhpennaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:706 ../../diskdrake/interactive.pm_.c:724
-msgid "new"
-msgstr "nevez"
-
-#: ../../diskdrake/interactive.pm_.c:722
-msgid "Choose an existing LVM to add to"
-msgstr "Dibabit da be LVM ouzhpennaĂą"
-
-#: ../../diskdrake/interactive.pm_.c:727
-msgid "LVM name?"
-msgstr "Anv LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:767
-msgid "This partition can't be used for loopback"
-msgstr "N'heller ket implijout ar parzhadur-maĂą evit saveteiĂą"
-
-#: ../../diskdrake/interactive.pm_.c:779
-msgid "Loopback"
-msgstr "SaveteiĂą"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "Loopback file name: "
-msgstr "Anv ar restr saveteiù : "
-
-#: ../../diskdrake/interactive.pm_.c:785
-#, fuzzy
-msgid "Give a file name"
-msgstr "Anv gwirion"
-
-#: ../../diskdrake/interactive.pm_.c:788
-msgid "File already used by another loopback, choose another one"
-msgstr "Restr implijet gant ur saveteiĂą all endeo, dibabit unan all"
-
-#: ../../diskdrake/interactive.pm_.c:789
-msgid "File already exists. Use it?"
-msgstr "Ar restr a zo endeo. E implijout ?"
-
-#: ../../diskdrake/interactive.pm_.c:812
-msgid "Mount options"
-msgstr "DibarzhoĂš marc'haĂą"
-
-#: ../../diskdrake/interactive.pm_.c:819
-msgid "Various"
-msgstr "A bep sort"
-
-#: ../../diskdrake/interactive.pm_.c:882 ../../standalone/drakfloppy_.c:104
-msgid "device"
-msgstr "trobarzhell"
-
-#: ../../diskdrake/interactive.pm_.c:883
-msgid "level"
-msgstr "live"
-
-#: ../../diskdrake/interactive.pm_.c:884
-msgid "chunk size"
-msgstr "ment diaoz"
-
-#: ../../diskdrake/interactive.pm_.c:899
-msgid "Be careful: this operation is dangerous."
-msgstr "Bezit war evezh : arvarus eo an obererezh-maù."
-
-#: ../../diskdrake/interactive.pm_.c:914
-#, fuzzy
-msgid "What type of partitioning?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: ../../diskdrake/interactive.pm_.c:932
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ma zigarezit na asantiĂą krouiĂą /boot ken pell war ar bladenn (war ur granenn "
-"> 1024).\n"
-"Pe e implijit LILO ha ne daio ket en-dro, pe ne rit ket ha n'hoc'h eus ket "
-"ezhomm a /boot"
-
-#: ../../diskdrake/interactive.pm_.c:936
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Lec'hiet eo ar parzhadur hoc'h eus diuzet da ouzphennaĂą evel gwrizienn (/) "
-"en tu-hont\n"
-"d'ar 1024vet kranenn eus ar bladenn galet, ha n'hoc'h eus ket a barzhadur /"
-"boot.\n"
-"Ma vennit implijout ar merour loc'haĂą LILO, taolit pled da ouzhpennaĂą ur "
-"parzhadur /boot"
-
-#: ../../diskdrake/interactive.pm_.c:942
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:962
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "War-nes bezaĂą skrivet war bladenn eo taolenn barzhaĂą an ardivink %s !"
-
-#: ../../diskdrake/interactive.pm_.c:966
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Ret e vo deoc'h adloc'haĂą a-raok ma talvezo ar c'hemm"
-
-#: ../../diskdrake/interactive.pm_.c:977
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Goude furmadiĂą ar parzhadur %s, holl roadoĂš ar parzhadur-se a vo kollet"
-
-#: ../../diskdrake/interactive.pm_.c:979
-msgid "Formatting"
-msgstr "O furmadiĂą"
-
-#: ../../diskdrake/interactive.pm_.c:980
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "O furmadiĂą ar restr saveteiĂą %s"
-
-#: ../../diskdrake/interactive.pm_.c:981
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "O furmadiĂą ar parzhadur %s"
-
-#: ../../diskdrake/interactive.pm_.c:992
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid sac'het"
-
-#: ../../diskdrake/interactive.pm_.c:992
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "KrouiĂą ur parzhadur nevez"
-
-#: ../../diskdrake/interactive.pm_.c:993
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "KrouiĂą ur parzhadur nevez"
-
-#: ../../diskdrake/interactive.pm_.c:1008
-#, c-format
-msgid "Copying %s"
-msgstr "AdskrivaĂą %s"
-
-#: ../../diskdrake/interactive.pm_.c:1012
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "SpisterioĂš"
-
-#: ../../diskdrake/interactive.pm_.c:1022
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1043
-#: ../../diskdrake/interactive.pm_.c:1102
-msgid "Device: "
-msgstr "Trobarzhell : "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lizher ar bladenn DOS : %s (diwar varteze hepken)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1056
-#: ../../diskdrake/interactive.pm_.c:1120
-msgid "Type: "
-msgstr "Seurt : "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-msgid "Name: "
-msgstr "Anv: "
-
-#: ../../diskdrake/interactive.pm_.c:1060
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "O kregiù : rann %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "Size: %s"
-msgstr "Ment: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s rann"
-
-#: ../../diskdrake/interactive.pm_.c:1065
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Kranenn %d da granenn %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-msgid "Formatted\n"
-msgstr "Furmadet\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-msgid "Not formatted\n"
-msgstr "Ket furmadet\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-msgid "Mounted\n"
-msgstr "Marc'het\n"
-
-#: ../../diskdrake/interactive.pm_.c:1069
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1071
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Restr(oÚ) saveteiù : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1072
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Parzhadur loc'het dre ziouer\n"
-" (evit loc'haĂą MS-DOS, ket evit lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1074
-#, c-format
-msgid "Level %s\n"
-msgstr "Live %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1075
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ment diaoz %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "PladennoĂš RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1078
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Anv ar restr saveteiù : %s"
-
-#: ../../diskdrake/interactive.pm_.c:1081
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1084
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1103
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ment: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1104
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Mentoniezh : %s kranenn, %s penn, %s rann\n"
-
-#: ../../diskdrake/interactive.pm_.c:1105
-msgid "Info: "
-msgstr "TitouroĂš: "
-
-#: ../../diskdrake/interactive.pm_.c:1106
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "PladennoĂš LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1107
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Seurt taolenn barzhaù : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1108
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "war bus %d Nn %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1122
-#, fuzzy, c-format
-msgid "Options: %s"
-msgstr "Parzhadur"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Seurt ar reizhiad restroÚ : "
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1142
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Re eeun eo an tremenger-se (%d arouezenn a zo ret d'an nebeutaĂą)"
-
-#: ../../diskdrake/interactive.pm_.c:1143
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "An tremegerioĂš ne glot ket"
-
-#: ../../diskdrake/interactive.pm_.c:1146
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1147
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "KemmaĂą seurt ar parzhadur"
-
-#
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a medium"
-msgstr "Klikit war ur parzhadur mar plij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Servijer DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "furmadiĂą er seurt %s eus %s a zo sac'het"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "N'ouzon ket penaos furmadiĂą %s er seurt %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fazi en ur zivarc'haù %s : %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "eeun"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "gant /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servijer"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "PoentoĂš marc'haĂą a rank kregiĂą gant /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Bez' ez eus ur parzhadur e boent marc'haĂą %s endeo\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fazi en ur zigeriù %s evit skrivaù : %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"C'hoarvezet ez eus ur fazi - n'eus bet kavet trobarzhell reizh ebet a-benn "
-"krouiĂą reizhiadoĂš restroĂš nevez warni. Gwiriit abeg ar gudenn-maĂą en ho "
-"ardivinkaj mar plij "
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "N'hoc'h eus parzhadur ebet !"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"BremaĂą e c'hellit diuz pe servijoĂš a vennit e vije laĂąset pa loc'her.\n"
-"Pa zeu ho logodenn war un draez, ul lagadenn skoazell a zeuio war wel hag\n"
-"a zisplego pal ar servij-se.\n"
-"\n"
-"Bezit aketuz-kenaĂą el lankad-maĂą ma vennit implijout ho ardivink evel ur\n"
-"servijer : mennout a rit emichaùs chom hep loc'haù kement servij n'ho peus "
-"ket\n"
-"c'hoant."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr "Gortozit mar plij"
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-#, fuzzy
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Gortozit mar plij."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Diuzit ar porzh a zere mar plij. Da skouer, porzh COM1 dindan MS Windows\n"
-"a vez anvet ttyS0 gant Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) ha Grub a zo kargerien loc'haù : barrek int da "
-"loc'haĂą\n"
-"pe Linux pe forzh pe reizhiad korvoiĂą all bezaĂąt war ho urzhiataer.\n"
-"PeurvuiaĂą, ar reizhiadoĂš korvoiĂą all-se a vez dinoet ha staliet reizh.\n"
-"Ma n'eo ket kont evel-hen, gallout a rit ouzhpennaĂą un enmont gant an dorn\n"
-"er skramm-maĂą. Taolit pled da zibab an arventennoĂš reizh.\n"
-"\n"
-"\n"
-"Gallout a rafec'h ivez mennout na lakaat hegerz hini ebet eus ar reizhiadoĂš\n"
-"korvoiĂą-se, neuze n'hoc'h eus ken nemet dilemel an enmontoĂš a zegouezh. "
-"Hogen\n"
-"neuze e vo ret deoc'h kaout ur bladennig loc'haĂą evit loc'haĂą anezho."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Ret eo deoc'h menegiĂą pelec'h e mennit\n"
-"lec'hiaĂą an titouroĂš ret evit loc'haĂą Linux.\n"
-"\n"
-"\n"
-"Nemet ma ouifec'h resis ar pezh a rit, dibabit \"Rann gentaĂą\n"
-"ar bladenn (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "N'hellaĂą ket implijout ar skignaĂą hep domani NIS"
-
-#: ../../install_any.pm_.c:794
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_any.pm_.c:798
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:810
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:832 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fazi en ur lenn ar restr %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Ret eo deoc'h kaout ur parzhadur gwrizienn.\n"
-"Evit se, krouit ur parzhadur (pe glikit war unan a zo c'hoazh).\n"
-"Da c'houde dibabit an ober ``Poent marc'haĂą'' ha lakait anezhaĂą da `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Ret eo deoc'h kaout ur parzhadur disloaĂą"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"N'hoc'h eus ket a barzhadur disloaĂą\n"
-"\n"
-"Kenderc'hel evelato ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Ret eo deoc'h kaout ur parzhadur disloaĂą"
-
-#: ../../install_interactive.pm_.c:90
-#, fuzzy
-msgid "Use free space"
-msgstr "Implij da saveteiĂą"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-#, fuzzy
-msgid "Use existing partitions"
-msgstr "O furmadiĂą parzhadurioĂš"
-
-#: ../../install_interactive.pm_.c:102
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "O klask assevel an daolenn barzhaĂą"
-
-#: ../../install_interactive.pm_.c:109
-#, fuzzy
-msgid "Use the Windows partition for loopback"
-msgstr "Implij da saveteiĂą"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pe barzhadur a vennit implijout evit lakaat Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Dibabit ar mentoĂš"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Ment ar parzhadur gwrizienn e Mo : "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Ment ar parzhadur disloaù e Mo : "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-#, fuzzy
-msgid "Which partition do you want to resize?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy
-msgid "Resizing Windows partition"
-msgstr "O jediĂą bevennoĂš ar reizhiad restroĂš FAT"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"HO EVEZH !\n"
-"\n"
-"Ezhomm en deus DrakX adventaĂą ho parzhadur Windows bremaĂą. Bezit war "
-"evezh :\n"
-"arvarus eo an obererezh-se. Ma n'hoc'h eus ket graet c'hoazh, gwelloc'h e\n"
-"vije deoc'h seveniĂą da gentaĂą scandisk (ha diouzh ret seveniĂą defrag) war "
-"ar\n"
-"parzhadur-se, ha gwareziĂą ho roadoĂš. Pa vezit sur, gwaskit \"Mat eo\""
-
-#: ../../install_interactive.pm_.c:147
-#, fuzzy
-msgid "Which size do you want to keep for Windows on"
-msgstr "Da beseurt rann e mennit dilec'hiaĂą ?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "parzhadur %s"
-
-#: ../../install_interactive.pm_.c:155
-#, fuzzy, c-format
-msgid "FAT resizing failed: %s"
-msgstr "AdventaĂą ent emgefreek sac'het"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partition to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Chetan an holl planedenn"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Chetan Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, fuzzy, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Goude adventaĂą ar parzhadur %s e vo kollet holl roadoĂš ar parzhadur-se"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "O furmadiĂą parzhadurioĂš"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Implijit fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, fuzzy, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Gallout a rit bremaĂą parzhaĂą ho pladenn galet %s\n"
-"Pa 'z eo graet, na zisoĂąjit ket enrollaĂą dre implijout `w'"
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "N'hoc'h eus parzhadur windows ebet !"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "N'hellan ouzpennaĂą parzhadur ebet ken"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, fuzzy, c-format
-msgid "Partitioning failed: %s"
-msgstr "Seurt taolenn barzhaù : %s\n"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "O laĂąsaĂą ar rouedad"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "O tizenaouiĂą ar rouedad"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Degouezhet ez eus ur fazi, hogen n'ouzon ket e veraĂą naet.\n"
-"Kendalc'hit war ho mar."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Poent marc'haĂą doubl %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Degemer e %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Lenner pladennig hegerz ebet"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "O kregiĂą gant al lankad `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Renkad staliaĂą"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Dibabit unan eus ar renkadoÚ staliaù a-heul mar plij :"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ment hollek ar strolladoĂš hoc'h eus diuzet a zo war-dro %d Mo.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ma vennit staliaĂą nebeutoc'h eget ar ment-se,\n"
-"diuzit an dregantad a bakadoĂš a vennit staliaĂą.\n"
-"\n"
-"Un dregantad izel a stalio hepken ar pakadoĂš pouezusaĂą;\n"
-"un dregantad a 100%% a stalio an holl bakadoĂš diuzet."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"N'eus egor war ho pladenn nemet evit %d%% eus ar pakadoĂš-se.\n"
-"\n"
-"Ma vennit staliaĂą nebeutoc'h eget se,\n"
-"diuzit an dregantad a bakadoĂš a vennit staliaĂą.\n"
-"Un dregantad izel a stalio hepken ar pakadoĂš pouezusaĂą;\n"
-"un dregantad a %d%% a stalio kement a bakadoĂš ma 'z eus tu."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Tu vo deoc'h o dibab spisoc'h el lankad a zeu."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Dregantad a bakadoĂš da staliaĂą"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:675
-msgid "Package Group Selection"
-msgstr "Diuzadenn strollad pakadoĂš"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:690
-msgid "Individual package selection"
-msgstr "Diuz pakadoĂš unan hag unan"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:615
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ment hollek : %d / %d Mo"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pakad siek"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Anv : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Stumm : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Ment : %d Ko\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Talvoudegezh : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-#, fuzzy
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "N'hellit ket andiuz ar pakad-maĂą. Staliet eo endo"
-
-#: ../../install_steps_gtk.pm_.c:422
-#, fuzzy
-msgid "The following packages are going to be installed"
-msgstr "Ar pakadoĂš a-heul a zo war-nes bezaĂą distaliet"
-
-#: ../../install_steps_gtk.pm_.c:423
-#, fuzzy
-msgid "The following packages are going to be removed"
-msgstr "Ar pakadoĂš a-heul a zo war-nes bezaĂą staliet/lamet"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "N'hellit ket diuz/andiuz ar pakad-maĂą"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "HemaĂą a zo ur pakad ret, n'hell ket bezaĂą andiuzet"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "N'hellit ket andiuz ar pakad-maĂą. Staliet eo endo"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bremanaet e tle bezaĂą ar pabak-maĂą\n"
-"Ha sur oc'h e mennit e ziuzaĂą ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "N'hellit ket andiuz ar pakad-maĂą. Ret eo dezhaĂą bezaĂą bremanaet"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "StaliaĂą"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "EnrollaĂą war bladennig"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Diuz pakadoĂš unan hag unan"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "DistaliaĂą"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:525
-msgid "Choose the packages you want to install"
-msgstr "Dibabit ar pakadoĂš a vennit staliaĂą"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:757
-msgid "Installing"
-msgstr "O staliaĂą"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "O vrasjediĂą"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Amzer a chom"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation..."
-msgstr "Gortozit mar plij, o prientiĂą ar staliadur"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakad"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "O staliaĂą ar pakad %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aotren"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:781
-#, fuzzy
-msgid "Refuse"
-msgstr "AdventaĂą"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:782
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Kemmit ho Cd-Rom!\n"
-"\n"
-"Lakait el lenner ar Cd-Rom warnaĂą an diketenn \"%s\" mar plij ha gwaskit Mat "
-"eo da c'houde.\n"
-"Ma n'emaĂą ket ganeoc'h gwaskit NullaĂą evit chom hep staliaĂą ar Cd-Rom-se."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:794
-#: ../../install_steps_interactive.pm_.c:798
-msgid "Go on anyway?"
-msgstr "Kenderc'hel evelato ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:794
-msgid "There was an error ordering packages:"
-msgstr "Ur fazi a zo bet en ur rummaù pakadoÚ :"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:798
-msgid "There was an error installing packages:"
-msgstr "Ur fazi a zo bet en ur staliaù ar pakadoÚ :"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ur fazi a zo bet"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1017
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Stokellaoueg"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Dibabit reizhadur ho stokellaoueg, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:207
-#, fuzzy
-msgid "Here is the full list of keyboards available"
-msgstr "stokellaoueg"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Pe renkad staliaĂą a fell deoc'h ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "StaliaĂą/Bremanaat"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Hag ur staliadur pe ur bremanadur eo ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Erbedet"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Mailh"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Bremanaat"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Bremanaat pakadoĂš hep ken"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porzh al logodenn"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Dibabit ar porzh a-steud m'eo luget ho logodenn outaĂą, mar plij."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "O kefluniaĂą kartennoĂš PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "KefluniaĂą IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "No partition available"
-msgstr "parzhadur hegerz ebet"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Dibabit at poentoĂš marc'haĂą"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"N'hellaĂą ket lenn ho taolenn barzhaĂą, re vrein eo evidon :(\n"
-"Klask a rin kenderc'hel en ur ziverkaĂą ar parzhadurioĂš siek"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Ne c'hellas ket DiskDrake lenn ent reizh an daolenn barzhaĂą.\n"
-"Kendalc'hit war ho mar !"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Parzhadur gwrizienn kavet ebet"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Parzhadur gwrizienn"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Pehini eo parzhadur gwrizienn (/) ho reizhiad ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Ret eo deoc'h adloc'haĂą evit ma talvezo kemmoĂš an daolenn barzhaĂą"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Dibabit ar parzhadur a vennit furmadiĂą"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "GwiriaĂą ar bloc'hoĂš siek ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "O furmadiĂą parzhadurioĂš"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "O krouiĂą hag o furmadiĂą ar restr saveteiĂą %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Ket a-walc'h a zisloaĂą evit peurstaliaĂą, kreskit anezhaĂą mar plij"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages..."
-msgstr "O klask ar pakadoĂš hegerz"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade..."
-msgstr "O kavout pakadoĂš da vremanaat"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, fuzzy, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "Ho reizhiad n'eus ket wa-walc'h a egor evit staliaĂą pe vremanaat"
-
-#: ../../install_steps_interactive.pm_.c:538
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:541
-msgid "Load from floppy"
-msgstr "Assevel adalek ar pladennig"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Loading from floppy"
-msgstr "AssevelaĂą adalek ar pladennig"
-
-#: ../../install_steps_interactive.pm_.c:543
-msgid "Package selection"
-msgstr "Diuzadenn pakadoĂš"
-
-#: ../../install_steps_interactive.pm_.c:548
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:560
-msgid "Save on floppy"
-msgstr "EnrollaĂą war bladennig"
-
-#: ../../install_steps_interactive.pm_.c:628
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:641
-#, fuzzy
-msgid "Type of install"
-msgstr "Dibabit pakadoĂš da staliaĂą"
-
-#: ../../install_steps_interactive.pm_.c:642
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:645
-msgid "With X"
-msgstr "Gant X"
-
-#: ../../install_steps_interactive.pm_.c:647
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:648
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:732
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"M'hoc'h eus an holl CDoĂš er roll a-is, gwaskit Mat eo.\n"
-"Ma n'hoc'h eus hini eus ar CDoĂš-se, gwaskit NullaĂą.\n"
-"Ma fazi deoc'h lod eus ar CDoĂš, andiuzit anezho ha gwaskit Mat eo."
-
-#: ../../install_steps_interactive.pm_.c:737
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom skridennet \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:757
-msgid "Preparing installation"
-msgstr "O prientiĂą ar staliadur"
-
-#: ../../install_steps_interactive.pm_.c:766
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"O staliaĂą ar pakad %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:812
-msgid "Post-install configuration"
-msgstr "Kefluniadur goude staliaĂą"
-
-#: ../../install_steps_interactive.pm_.c:818
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:824
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Lakait ur bladennig gwerc'h el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:844
-msgid ""
-"You now have the opportunity to download encryption software.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Tu zo deoc'h bremaĂą ezkargaĂą meziantoĂš gouestlet d'ar rinegouriezh.\n"
-"\n"
-"HO EVEZH :\n"
-"\n"
-"Abalamour m'eo disheĂąvel ar pennaennoĂš meur o talvezout evit ar meziantoĂš-"
-"maĂą hervez\n"
-"gwiraouriezhoĂš disheĂąvel, ret eo d'an arval ha/pe arveriad en diwezh ar "
-"meziantoĂš-maĂą\n"
-"gwiriaĂą eo aotreet da ezskargaĂą, mirout ha/pe implijout ar meziantoĂš-maĂą\n"
-"gouez d'al lezennoĂš en e/he gwiraouriezh.\n"
-"\n"
-"Ouzhpenn an arval ha/pe arveriad en diwezh a rank bezaĂą war evezh chom hep "
-"terriĂą\n"
-"lezennoĂš e/he gwiraouriezh. Ma c'hoarvezfe gant an arval ha/pe arveriad\n"
-"en diwezh na zoujaĂą ouzh termenoĂš lezennoĂš o talvezout, e telezfe kastizoĂš\n"
-"kriz.\n"
-"\n"
-"E nep degouezh ne vo dalc'het Mandrakesoft nag e oberatourien na/pe e "
-"bourvezerien\n"
-"atebek eus nep gaou dibar, ameeun pe zarvoudus a c'hoarvezfe (ha pa vefe\n"
-"zoken e-touez traoĂš all koll gounid, arsav aferioĂš, koll roadoĂš kenwerzhel "
-"ha\n"
-"kolloĂš arc'hant all, hag atebegezh pe zigoll diouzh an dro da vezaĂą paeet\n"
-"da heul ur barnadeg) o tont diouzh implij, perc'hennaĂą, pe zoken ezkargaĂą\n"
-"ar meziantoĂš-maĂą, a c'hellfe an arval ha/pe arveriad en diwezh bezaĂą\n"
-"grataet goude bezaĂą sinet an emglev-maĂą.\n"
-"\n"
-"\n"
-"Evit forzh pe c'houlenn a-zivout an emglevioĂš-se, darempredit mar plij\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"SUA"
-
-#: ../../install_steps_interactive.pm_.c:883
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been released after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:898
-#, fuzzy
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "O taremprediĂą ar melezour evit kaout roll ar pakadoĂš hegerz"
-
-#: ../../install_steps_interactive.pm_.c:903
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dibabit ur melezour da dapout ar pakadoĂš diwarnaĂą"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "O taremprediĂą ar melezour evit kaout roll ar pakadoĂš hegerz"
-
-#: ../../install_steps_interactive.pm_.c:939
-msgid "Which is your timezone?"
-msgstr "Pe seurt a vo ho takad-eur ?"
-
-#: ../../install_steps_interactive.pm_.c:944
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Ha war GMT eo lakaet ho eurier periantel ?"
-
-#: ../../install_steps_interactive.pm_.c:945
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:952
-msgid "NTP Server"
-msgstr "Servijer NTP"
-
-#: ../../install_steps_interactive.pm_.c:986
-#: ../../install_steps_interactive.pm_.c:994
-#, fuzzy
-msgid "Remote CUPS server"
-msgstr "Steud a-bell"
-
-#: ../../install_steps_interactive.pm_.c:987
-#, fuzzy
-msgid "No printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../install_steps_interactive.pm_.c:1004
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Hag un all hoc'h eus ?"
-
-#: ../../install_steps_interactive.pm_.c:1006
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1008
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1013 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Evit diverriĂą"
-
-#: ../../install_steps_interactive.pm_.c:1016
-msgid "Mouse"
-msgstr "Logodenn"
-
-#: ../../install_steps_interactive.pm_.c:1018
-msgid "Timezone"
-msgstr "Takad-eur"
-
-#: ../../install_steps_interactive.pm_.c:1019 ../../printerdrake.pm_.c:2279
-#: ../../printerdrake.pm_.c:2357
-msgid "Printer"
-msgstr "Moullerez"
-
-#: ../../install_steps_interactive.pm_.c:1021
-msgid "ISDN card"
-msgstr "Kartenn ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1024
-#: ../../install_steps_interactive.pm_.c:1026
-msgid "Sound card"
-msgstr "Kartenn son"
-
-#: ../../install_steps_interactive.pm_.c:1028
-msgid "TV card"
-msgstr "Kartenn pellwel"
-
-#: ../../install_steps_interactive.pm_.c:1066
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1094
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1067
-#: ../../install_steps_interactive.pm_.c:1090
-#: ../../install_steps_interactive.pm_.c:1103
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1068
-#: ../../install_steps_interactive.pm_.c:1090
-msgid "Local files"
-msgstr "RestroĂš lec'hel"
-
-#: ../../install_steps_interactive.pm_.c:1077
-#: ../../install_steps_interactive.pm_.c:1078 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "TermeniĂą tremenger root"
-
-#: ../../install_steps_interactive.pm_.c:1079
-msgid "No password"
-msgstr "Tremenger ebet"
-
-#: ../../install_steps_interactive.pm_.c:1084
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Re eeun eo an tremenger-se (%d arouezenn a zo ret d'an nebeutaĂą)"
-
-#: ../../install_steps_interactive.pm_.c:1090 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Dilesadur"
-
-#: ../../install_steps_interactive.pm_.c:1098
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Dilesadur"
-
-#: ../../install_steps_interactive.pm_.c:1099
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1100
-msgid "LDAP Server"
-msgstr "Servijer LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1106
-msgid "Authentication NIS"
-msgstr "Dilesadur NIS"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "NIS Domain"
-msgstr "Domani NIS"
-
-#: ../../install_steps_interactive.pm_.c:1108
-msgid "NIS Server"
-msgstr "Servijer NIS"
-
-#: ../../install_steps_interactive.pm_.c:1143
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ur bladenn loc'haĂą neuziet a ro un tu da loc'haĂą ho reizhiad Linux hep "
-"bezaĂą\n"
-"dindan beli ar c'harger loc'haĂą boas. Talvoudus eo ma ne mennit ket staliaĂą "
-"LILO\n"
-"(pe grub) war ho reizhiad, pe ma skarzh ur reizhiad oberiaĂą LILO, pe ma ne\n"
-"da ket en-dro LILO war ho kefluniadur periantel. Ur bladenn loc'haĂą neuziet\n"
-"a c'hell ivez bezaĂą implijet gant ar skeudenn saveteiĂą Mandrake, en ur "
-"aesaat an\n"
-"assevel pa vefec'h sac'het grevus. Mennout a rit krouiĂą ur bladenn loc'haĂą "
-"evit\n"
-"ho reizhiad ?"
-
-#: ../../install_steps_interactive.pm_.c:1159
-msgid "First floppy drive"
-msgstr "Lenner pladennig kentaĂą"
-
-#: ../../install_steps_interactive.pm_.c:1160
-msgid "Second floppy drive"
-msgstr "Eil lenner pladennig"
-
-#: ../../install_steps_interactive.pm_.c:1161 ../../printerdrake.pm_.c:1851
-msgid "Skip"
-msgstr "Tremen e-biou"
-
-#: ../../install_steps_interactive.pm_.c:1166
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ur bladenn loc'haĂą neuziet a ro un tu da loc'haĂą ho reizhiad Linux hep "
-"bezaĂą\n"
-"dindan beli ar c'harger loc'haĂą boas. Talvoudus eo ma ne mennit ket staliaĂą "
-"LILO\n"
-"(pe grub) war ho reizhiad, pe ma skarzh ur reizhiad oberiaĂą LILO, pe ma ne\n"
-"da ket en-dro LILO war ho kefluniadur periantel. Ur bladenn loc'haĂą neuziet\n"
-"a c'hell ivez bezaĂą implijet gant ar skeudenn saveteiĂą Mandrake, en ur "
-"aesaat an\n"
-"assevel pa vefec'h sac'het grevus. Mennout a rit krouiĂą ur bladenn loc'haĂą "
-"evit\n"
-"ho reizhiad ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1172
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1180
-msgid "Sorry, no floppy drive available"
-msgstr "Ho tigarez, lenner pladennig hegerz ebet"
-
-#: ../../install_steps_interactive.pm_.c:1184
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Dibabit al lenner pladennig a vennit implijout evit ober ar bladenn loc'haĂą"
-
-#: ../../install_steps_interactive.pm_.c:1188
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Lakait ur bladennig el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:1191
-msgid "Creating bootdisk..."
-msgstr "O krouiĂą ar bladenn loc'haĂą"
-
-#: ../../install_steps_interactive.pm_.c:1198
-msgid "Preparing bootloader..."
-msgstr "O prientiĂą ar c'harger loc'haĂą"
-
-#: ../../install_steps_interactive.pm_.c:1209
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1215
-msgid "Do you want to use aboot?"
-msgstr "Mennout a rit implijout aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1218
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fazi en ur staliaĂą aboot,\n"
-"klask rediaĂą ar staliadur zoken ma tistruj ar parzhadur kentaĂą ?"
-
-#: ../../install_steps_interactive.pm_.c:1225
-msgid "Installing bootloader"
-msgstr "StaliaĂą ar c'harger loc'haĂą"
-
-#: ../../install_steps_interactive.pm_.c:1231
-#, fuzzy
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Staliadur LILO a zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#: ../../install_steps_interactive.pm_.c:1239
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1283
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Lakait ur bladennig gwerc'h el lenner %s"
-
-#: ../../install_steps_interactive.pm_.c:1287
-msgid "Creating auto install floppy..."
-msgstr "O krouiĂą ur bladennig staliaĂą emgefreek"
-
-#: ../../install_steps_interactive.pm_.c:1298
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"LankadoĂš 'zo n'int ket peurc'hraet.\n"
-"\n"
-"Mennout a rit kuitaat da vat bremaĂą ?"
-
-#: ../../install_steps_interactive.pm_.c:1309
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gourc'hemennoĂš, peurc'hraet eo ar staliadur.\n"
-"Lamit ar bladenn loc'haĂą ha gwaskit enkas evit adloc'haĂą.\n"
-"\n"
-"\n"
-"Evit titouroĂš war palastroĂš hegerz evit stumm-maĂą Mandrake Linux,\n"
-"sellit ouzh ar meneger fazioĂš hegerz e \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"TitouroĂš war gefluniaĂą ho reizhiad a zo hegerz e rannbennad Goude\n"
-"StaliaĂą Sturier ofisiel an Arveriad Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1326
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "O krouiĂą ur bladennig staliaĂą emgefreek"
-
-#: ../../install_steps_interactive.pm_.c:1328
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1333
-msgid "Automated"
-msgstr "Emgefreek"
-
-#: ../../install_steps_interactive.pm_.c:1333
-#, fuzzy
-msgid "Replay"
-msgstr "AdkargaĂą"
-
-#: ../../install_steps_interactive.pm_.c:1336
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Diuz pakadoĂš unan hag unan"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Staliadur Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> etre elfennoĂš | <Esaouenn> a ziuz | <F12> skramm a heul "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mank"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Dibabit ur restr"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Barek"
-
-#: ../../interactive.pm_.c:315
-#, fuzzy
-msgid "Basic"
-msgstr "Diazez"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Gortozit mar plij"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Dibab fall, klaskit adarre\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ho tibab ? (%s dre ziouer)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ho tibab ? (%s dre ziouer)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Nozel `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button?"
-msgstr "Mennout a rit implijout SILO ?"
-
-#: ../../interactive_stdio.pm_.c:103
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ho tibab ? (%s dre ziouer)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:197 ../../keyboard.pm_.c:228
-msgid "Czech (QWERTZ)"
-msgstr "Tchek (QWERTZ)"
-
-#: ../../keyboard.pm_.c:198 ../../keyboard.pm_.c:230
-msgid "German"
-msgstr "Alaman"
-
-#: ../../keyboard.pm_.c:199
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:200 ../../keyboard.pm_.c:237
-msgid "Spanish"
-msgstr "Spagnol"
-
-#: ../../keyboard.pm_.c:201 ../../keyboard.pm_.c:238
-msgid "Finnish"
-msgstr "Finnek"
-
-#: ../../keyboard.pm_.c:202 ../../keyboard.pm_.c:239
-msgid "French"
-msgstr "Gall"
-
-#: ../../keyboard.pm_.c:203 ../../keyboard.pm_.c:264
-msgid "Norwegian"
-msgstr "Norvegek"
-
-#: ../../keyboard.pm_.c:204
-msgid "Polish"
-msgstr "Polonek"
-
-#: ../../keyboard.pm_.c:205 ../../keyboard.pm_.c:272
-msgid "Russian"
-msgstr "Rusiek"
-
-#: ../../keyboard.pm_.c:207 ../../keyboard.pm_.c:274
-msgid "Swedish"
-msgstr "Svedek"
-
-#: ../../keyboard.pm_.c:208 ../../keyboard.pm_.c:289
-msgid "UK keyboard"
-msgstr "Stokellaoueg RU"
-
-#: ../../keyboard.pm_.c:209 ../../keyboard.pm_.c:290
-msgid "US keyboard"
-msgstr "Stokellaoueg SUA"
-
-#: ../../keyboard.pm_.c:211
-#, fuzzy
-msgid "Albanian"
-msgstr "Ukrainiek"
-
-#: ../../keyboard.pm_.c:212
-msgid "Armenian (old)"
-msgstr "Armeniek (kozh)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Armenian (typewriter)"
-msgstr "Armeniek (skriverez)"
-
-#: ../../keyboard.pm_.c:214
-msgid "Armenian (phonetic)"
-msgstr "Armeniek (soniadel)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjanek (latin)"
-
-#: ../../keyboard.pm_.c:221
-msgid "Belgian"
-msgstr "Belgian"
-
-#: ../../keyboard.pm_.c:222
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armeniek (soniadel)"
-
-#: ../../keyboard.pm_.c:223
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarek (BDS)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilek (ABNT-2)"
-
-#: ../../keyboard.pm_.c:225
-#, fuzzy
-msgid "Belarusian"
-msgstr "Bulgarek"
-
-#: ../../keyboard.pm_.c:226
-msgid "Swiss (German layout)"
-msgstr "Suis (reizhadur alaman)"
-
-#: ../../keyboard.pm_.c:227
-msgid "Swiss (French layout)"
-msgstr "Suis (reizhadur gall)"
-
-#: ../../keyboard.pm_.c:229
-msgid "Czech (QWERTY)"
-msgstr "Tchek (QWERTY)"
-
-#: ../../keyboard.pm_.c:231
-msgid "German (no dead keys)"
-msgstr "Alaman (stokell marv ebet)"
-
-#: ../../keyboard.pm_.c:232
-msgid "Danish"
-msgstr "Danek"
-
-#: ../../keyboard.pm_.c:233
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:234
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norvegek)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Svedek)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Estonian"
-msgstr "Estoniek"
-
-#: ../../keyboard.pm_.c:240
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Jorjiek (reizhadur \"Rusiek\")"
-
-#: ../../keyboard.pm_.c:241
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Jorjiek (reizhadur \"Latin\")"
-
-#: ../../keyboard.pm_.c:242
-msgid "Greek"
-msgstr "Gresian"
-
-#: ../../keyboard.pm_.c:243
-msgid "Hungarian"
-msgstr "Hungarian"
-
-#: ../../keyboard.pm_.c:244
-msgid "Croatian"
-msgstr "Kroatek"
-
-#: ../../keyboard.pm_.c:245
-msgid "Israeli"
-msgstr "Israelian"
-
-#: ../../keyboard.pm_.c:246
-msgid "Israeli (Phonetic)"
-msgstr "Israelian (soniadel)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Iranian"
-msgstr "Ukrainiek"
-
-#: ../../keyboard.pm_.c:248
-msgid "Icelandic"
-msgstr "Islandek"
-
-#: ../../keyboard.pm_.c:249
-msgid "Italian"
-msgstr "Italian"
-
-#: ../../keyboard.pm_.c:251
-msgid "Japanese 106 keys"
-msgstr ""
-
-#: ../../keyboard.pm_.c:254
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Reizhadur Stokellaoueg RU"
-
-#: ../../keyboard.pm_.c:255
-msgid "Latin American"
-msgstr "Amerikan Latin"
-
-#: ../../keyboard.pm_.c:256
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituaniek AZERTY (kozh)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituaniek AZERTY (nevez)"
-
-#: ../../keyboard.pm_.c:259
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituaniek QUERTY \"linenn sifroĂš\""
-
-#: ../../keyboard.pm_.c:260
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituaniek QUERTY \"soniadel\""
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Latvian"
-msgstr "TitouroĂš"
-
-#: ../../keyboard.pm_.c:262
-msgid "Macedonian"
-msgstr "Makedonia"
-
-#: ../../keyboard.pm_.c:263
-msgid "Dutch"
-msgstr "Hollandek"
-
-#: ../../keyboard.pm_.c:265
-msgid "Polish (qwerty layout)"
-msgstr "Polonek (reizhadur qwerty)"
-
-#: ../../keyboard.pm_.c:266
-msgid "Polish (qwertz layout)"
-msgstr "Polonek (reizhadur qwerty)"
-
-#: ../../keyboard.pm_.c:267
-msgid "Portuguese"
-msgstr "Portugalek"
-
-#: ../../keyboard.pm_.c:268
-msgid "Canadian (Quebec)"
-msgstr "Kanadian (Kebek)"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rusiek (Yawerty)"
-
-#: ../../keyboard.pm_.c:271
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rusiek (Yawerty)"
-
-#: ../../keyboard.pm_.c:273
-msgid "Russian (Yawerty)"
-msgstr "Rusiek (Yawerty)"
-
-#: ../../keyboard.pm_.c:275
-msgid "Slovenian"
-msgstr "Slovek"
-
-#: ../../keyboard.pm_.c:276
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakek (QWERTZ)"
-
-#: ../../keyboard.pm_.c:277
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakek (QWERTY)"
-
-#: ../../keyboard.pm_.c:279
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Yougoslaviek (reizhadur latin)"
-
-#: ../../keyboard.pm_.c:281
-#, fuzzy
-msgid "Tamil"
-msgstr "Taolenn"
-
-#: ../../keyboard.pm_.c:282
-msgid "Thai keyboard"
-msgstr "Stokellaoueg Thai"
-
-#: ../../keyboard.pm_.c:284
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Stokellaoueg Thai"
-
-#: ../../keyboard.pm_.c:285
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkek (hengounel doare \"F\")"
-
-#: ../../keyboard.pm_.c:286
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkek (arnevez doare \"Q\")"
-
-#: ../../keyboard.pm_.c:288
-msgid "Ukrainian"
-msgstr "Ukrainiek"
-
-#: ../../keyboard.pm_.c:291
-msgid "US keyboard (international)"
-msgstr "Stokellaoueg SUA (etrevroadel)"
-
-#: ../../keyboard.pm_.c:292
-#, fuzzy
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Lituaniek QUERTY \"linenn sifroĂš\""
-
-#: ../../keyboard.pm_.c:293
-msgid "Yugoslavian (latin)"
-msgstr "Yougoslaviek (latin)"
-
-#: ../../keyboard.pm_.c:301
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:302
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:303
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:304
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:305
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:306
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:307
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:308
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:309
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Marc'haĂą kelc'hiek %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:832
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Logodenn Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Logodenn rummel PS2 rodellek"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Logodenn Kensington Thinking"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 nozelenn"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Logodenn rummel 2 nozelenn"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Rummel"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rodel"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "a-steud"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Logodenn rummel 3 nozelenn"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech doare CC"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "Doare MM"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logodenn Logitech (a-steud, seurt C7 kozh)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Logodenn bus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 nozelenn"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 nozelenn"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ebet"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Logodenn ebet"
-
-#: ../../mouse.pm_.c:499
-#, fuzzy
-msgid "Please test the mouse"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "FIÑV HO RODELL !"
-
-#: ../../my_gtk.pm_.c:666
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:701
-msgid "Finish"
-msgstr "Disoc'h"
-
-#: ../../my_gtk.pm_.c:701 ../../printerdrake.pm_.c:1590
-msgid "Next ->"
-msgstr "A heul ->"
-
-#: ../../my_gtk.pm_.c:702 ../../printerdrake.pm_.c:1588
-msgid "<- Previous"
-msgstr "<- Diaraog"
-
-#: ../../my_gtk.pm_.c:1034
-msgid "Is this correct?"
-msgstr "Ha reizh eo ?"
-
-#: ../../my_gtk.pm_.c:1098 ../../services.pm_.c:222
-msgid "Info"
-msgstr "TitouroĂš"
-
-#: ../../my_gtk.pm_.c:1119
-msgid "Expand Tree"
-msgstr "Astenn ar wezenn"
-
-#: ../../my_gtk.pm_.c:1120
-msgid "Collapse Tree"
-msgstr "PlegaĂą ar wezenn"
-
-#: ../../my_gtk.pm_.c:1121
-msgid "Toggle between flat and group sorted"
-msgstr "GwintaĂą etre kompez ha rummet dre strollad"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-#, fuzzy
-msgid "Connect to the Internet"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "implijit dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "implijit pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "implijit pptp"
-
-#: ../../network/ethernet.pm_.c:37
-#, fuzzy
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:248
-#, fuzzy
-msgid "Choose the network interface"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Dibabit ar porzh a-steud m'eo luget ho logodenn outaĂą, mar plij."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "kartenn rouedad kavet ebet"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:364
-msgid "Configuring network"
-msgstr "KefluniaĂą ar rouedad"
-
-#: ../../network/ethernet.pm_.c:203
-#, fuzzy
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Roit ho anv ostiz mar plij.\n"
-"Un anv peurzoareet a zlefe bezaĂą hini o ostiz,\n"
-"evel ``mabenveg.mastal.makomp.com''.\n"
-"Gallout a rit ivez reiĂą chomlec'h IP an dreuzell m'hoc'h eus unan"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:369
-msgid "Host name"
-msgstr "Anv an ostiz"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:179
-#: ../../network/netconnect.pm_.c:206 ../../network/netconnect.pm_.c:229
-#: ../../network/netconnect.pm_.c:237
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Mailh"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "What kind is your ISDN connection?"
-msgstr "Ouzh pe borzh a-steud eo luget ho logodenn ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Kefluniadur ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "AmprouiĂą ar c'hefluniadur"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-#, fuzzy
-msgid "Which protocol do you want to use?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../network/isdn.pm_.c:199
-#, fuzzy
-msgid "What kind of card do you have?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Dilaoskel"
-
-#: ../../network/isdn.pm_.c:210
-#, fuzzy
-msgid "Continue"
-msgstr "Kenderc'hel evelato ?"
-
-#: ../../network/isdn.pm_.c:216
-#, fuzzy
-msgid "Which is your ISDN card?"
-msgstr "Pehini eo ho takad-eur ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "DibarzhoĂš sifrennaĂą"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-#, fuzzy
-msgid "Phone number"
-msgstr "Niverenn bellgomz"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Anv ereaĂą"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Diazezet war ur skrid"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Diazezet war un dermenell"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Anv ar domani"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Servijer DNS kentaĂą (da zilenn)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Eil servijer DNS (da zilenn)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Da beseurt pladenn e mennit dilec'hiaĂą ?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Da beseurt pladenn e mennit dilec'hiaĂą ?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../network/netconnect.pm_.c:50
-#, fuzzy
-msgid "Internet connection & configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:256
-#: ../../network/netconnect.pm_.c:276 ../../network/tools.pm_.c:63
-msgid "Network Configuration"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:171
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Dibabit ar ment nevez"
-
-#: ../../network/netconnect.pm_.c:172
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:179 ../../printerdrake.pm_.c:145
-msgid "Detecting devices..."
-msgstr "O tinoiĂą trobarzhelloĂš..."
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Poent marc'haĂą doubl %s"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:191 ../../network/netconnect.pm_.c:200
-#, c-format
-msgid "detected %s"
-msgstr "kavoutet %s"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:192 ../../network/netconnect.pm_.c:201
-#, c-format
-msgid "detected on interface %s"
-msgstr "kavoutet war %s"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Cable connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:193 ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-#, fuzzy
-msgid "LAN connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:194 ../../network/netconnect.pm_.c:203
-msgid "ethernet card(s) detected"
-msgstr "kartenn(oĂš) ethernet kavoutet"
-
-#: ../../network/netconnect.pm_.c:206
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Dibabit ar benveg a vennit staliaĂą"
-
-#: ../../network/netconnect.pm_.c:230
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:231
-#, fuzzy
-msgid "Internet connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../network/netconnect.pm_.c:237
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "Mennout a rit implijout aboot ?"
-
-#: ../../network/netconnect.pm_.c:251
-#, fuzzy
-msgid "Network configuration"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../network/netconnect.pm_.c:252
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:256
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:270
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:271
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:293
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:298
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Skrivit ar c'hefluniadur IP evit ar benveg-maĂą mar plij.\n"
-"Pep mellad a zlefe bezaĂą skrivet evel ur chomlec'h IP e stumm\n"
-"sifroĂš dekvel pikoĂš etrezo (da skouer 1.2.3.4)."
-
-#: ../../network/network.pm_.c:308 ../../network/network.pm_.c:309
-#, c-format
-msgid "Configuring network device %s"
-msgstr "O kefluniaĂą an drobarzhell rouedad %s"
-
-#: ../../network/network.pm_.c:309
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Servijer XFree86 : %s\n"
-
-#: ../../network/network.pm_.c:311 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Chomlec'h IP"
-
-#: ../../network/network.pm_.c:312 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maskl rouedad"
-
-#: ../../network/network.pm_.c:313
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:313
-msgid "Automatic IP"
-msgstr "IP emgefreek"
-
-#: ../../network/network.pm_.c:314
-#, fuzzy
-msgid "Start at boot"
-msgstr "KrouiĂą ur bladennig loc'haĂą"
-
-#: ../../network/network.pm_.c:335 ../../printerdrake.pm_.c:714
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Er furmad 1.2.3.4 e tlefe bezaĂą ar chomlec'h IP"
-
-#: ../../network/network.pm_.c:365
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Roit ho anv ostiz mar plij.\n"
-"Un anv peurzoareet a zlefe bezaĂą hini o ostiz,\n"
-"evel ``mabenveg.mastal.makomp.com''.\n"
-"Gallout a rit ivez reiĂą chomlec'h IP an dreuzell m'hoc'h eus unan"
-
-#: ../../network/network.pm_.c:370
-msgid "DNS server"
-msgstr "Servijer DNS"
-
-#: ../../network/network.pm_.c:371
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:373
-msgid "Gateway device"
-msgstr "Trobarzhell an dreuzell"
-
-#: ../../network/network.pm_.c:385
-#, fuzzy
-msgid "Proxies configuration"
-msgstr "Kefluniadur goude staliaĂą"
-
-#: ../../network/network.pm_.c:386
-msgid "HTTP proxy"
-msgstr "Proksi HTTP"
-
-#: ../../network/network.pm_.c:387
-msgid "FTP proxy"
-msgstr "Proksi FTP"
-
-#: ../../network/network.pm_.c:388
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:391
-msgid "Proxy should be http://..."
-msgstr "http://... a zlefe bezaĂą ar proksi"
-
-#: ../../network/network.pm_.c:392
-msgid "Proxy should be ftp://..."
-msgstr "ftp://... a zlefe bezaĂą ar proksi"
-
-#: ../../network/tools.pm_.c:41
-#, fuzzy
-msgid "Internet configuration"
-msgstr "KefluniaĂą ar proksioĂš"
-
-#: ../../network/tools.pm_.c:42
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../network/tools.pm_.c:46 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../network/tools.pm_.c:56
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Da beseurt pladenn e mennit dilec'hiaĂą ?"
-
-#: ../../network/tools.pm_.c:57
-msgid "For security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:58
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/tools.pm_.c:82
-#, fuzzy
-msgid "Connection Configuration"
-msgstr "KefluniaĂą ar proksioĂš"
-
-#: ../../network/tools.pm_.c:83
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartenn"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memor kartenn (DMA)"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO kartenn"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 kartenn"
-
-#: ../../network/tools.pm_.c:89 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartenn"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:615
-#, fuzzy
-msgid "Provider phone number"
-msgstr "Niverenn bellgomz"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DibarzhoĂš ar voullerez (da zilenn)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DibarzhoĂš ar voullerez (da zilenn)"
-
-#: ../../network/tools.pm_.c:95
-#, fuzzy
-msgid "Choose your country"
-msgstr "Dibabit ho stokellaoueg"
-
-#: ../../network/tools.pm_.c:96 ../../standalone/draknet_.c:620
-#, fuzzy
-msgid "Dialing mode"
-msgstr "Anv domani"
-
-#: ../../network/tools.pm_.c:97 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/tools.pm_.c:98 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Anv ar gevreadenn"
-
-#: ../../network/tools.pm_.c:99 ../../standalone/draknet_.c:618
-#, fuzzy
-msgid "Account Login (user name)"
-msgstr "Poent marc'haĂą"
-
-#: ../../network/tools.pm_.c:100 ../../standalone/draknet_.c:619
-#, fuzzy
-msgid "Account Password"
-msgstr "Tremenger"
-
-#: ../../network/tools.pm_.c:118
-msgid "United Kingdom"
-msgstr ""
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "marc'haù sac'het : "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Un toull a zo en ho taolenn barzhaĂą hogen n'hellan ket e implijout.\n"
-"FiĂąval ar parzhadurioĂš kentaĂą derez evit ma vo an toull stok ouzh ar "
-"parzhadurioĂš astennet eo an diskoulm"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Assevel adalek ar restr %s sac'het %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Restr gwareziĂą siek"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fazi en ur skrivaĂą er restr %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "a rankfec'h kaout"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "a-bouez"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "brav-tre"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "brav"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "marteze"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printer.pm_.c:48
-#, fuzzy
-msgid "Remote printer"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Steud a-bell"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:736
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "lpd a-bell"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "DibarzhoĂš ar voullerez NetWare"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servijer moullaĂą"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:740
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2733
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "MoullerezioĂš lec'hel"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Moullerezio* a-bell"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", Mouluriez USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Fazi en ur skrivaĂą er restr %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1138
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(mollad %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP ar servijer SMB"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2394
-#: ../../printerdrake.pm_.c:2405 ../../printerdrake.pm_.c:2621
-#: ../../printerdrake.pm_.c:2673 ../../printerdrake.pm_.c:2700
-#: ../../printerdrake.pm_.c:2870 ../../printerdrake.pm_.c:2872
-msgid " (Default)"
-msgstr " (Dre ziouer)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Diuzit lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Penaos eo luget ar voullerez ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2457
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Kefluniadur"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2458
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Steud a-bell"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Er furmad 1.2.3.4 e tlefe bezaĂą ar chomlec'h IP"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:864
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP ar servijer SMB"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:857
-#, fuzzy
-msgid "Port"
-msgstr "Paour"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Kefluniadur goude staliaĂą"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "AmprouiĂą ar porzhioĂš"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2440
-#: ../../printerdrake.pm_.c:2559
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Dilesadur"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Poent marc'haĂą doubl %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Moullerez USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "N'ev ket Moullerez lec'hel!\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "KefluniaĂą ar proksioĂš"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or an "
-"HP LaserJet 2200?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:484
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "O staliaĂą ar pakad %s"
-
-#: ../../printerdrake.pm_.c:489
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:507
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "O staliaĂą ar pakad %s"
-
-#: ../../printerdrake.pm_.c:519
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:536
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:546 ../../printerdrake.pm_.c:1020
-#: ../../printerdrake.pm_.c:1134
-msgid "Reading printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote lpd Printer Options"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"A-benn implijout ur steud moulaĂą lpd a-bell, ret eo deoc'h\n"
-"pourvezaĂą anv ostiz ar servijer moullaĂą hag anv as steud\n"
-"war ar servijer-se ma zlefe bezaĂą kaset an dleadoĂš moullaĂą."
-
-#: ../../printerdrake.pm_.c:628
-#, fuzzy
-msgid "Remote host name"
-msgstr "Anv an ostiz a-bell"
-
-#: ../../printerdrake.pm_.c:629
-#, fuzzy
-msgid "Remote printer name"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:632
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Anv an ostiz a-bell"
-
-#: ../../printerdrake.pm_.c:636
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Anv an ostiz a-bell"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "DibarzhoĂš moullaĂą SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:705
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Evit moullaĂą war ur voullerez SMB eo ret deoc'h pourvezaĂą\n"
-"anv an ostiz SMB (Ho evezh ! DisheĂąvel e c'hell bezaĂą diouzh\n"
-"e anv ostiz TCP/IP !) ha marteze chomlec'h IP ar servijer moullaĂą,\n"
-"kement hag anv rannet ar voullerez a glaskit tizhout ha ne vern pe\n"
-"ditour a anv arveriad, tremenger ha strollad labour en implij."
-
-#: ../../printerdrake.pm_.c:706
-msgid "SMB server host"
-msgstr "Anv ar servijer SMB"
-
-#: ../../printerdrake.pm_.c:707
-msgid "SMB server IP"
-msgstr "IP ar servijer SMB"
-
-#: ../../printerdrake.pm_.c:708
-msgid "Share name"
-msgstr "Anv rannet"
-
-#: ../../printerdrake.pm_.c:711
-msgid "Workgroup"
-msgstr "Strollad labour"
-
-#: ../../printerdrake.pm_.c:718
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:722
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:727
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:728
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:738
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:741
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "NetWare Printer Options"
-msgstr "DibarzhoĂš ar voullerez NetWare"
-
-#: ../../printerdrake.pm_.c:804
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Evit moullaĂą war ur voullerez NetWare eo ret deoc'h pourvezaĂą anv ar\n"
-"servijer moullaĂą NetWare (Ho evezh ! DisheĂąvel e c'hell bezaĂą diouzh e\n"
-"anv ostiz TCP/IP !) kement hag anv ar steud moullaĂą evit ar voullerez\n"
-"a glaskit tizhout ha ne vern pe anv arveriad ha tremenger en implij."
-
-#: ../../printerdrake.pm_.c:805
-msgid "Printer Server"
-msgstr "Servijer moullaĂą"
-
-#: ../../printerdrake.pm_.c:806
-msgid "Print Queue Name"
-msgstr "Anv ar steud moullaĂą"
-
-#: ../../printerdrake.pm_.c:811
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:815
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "DibarzhoĂš ar voullerez NetWare"
-
-#: ../../printerdrake.pm_.c:855
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:856
-msgid "Printer host name"
-msgstr "Anv ar voullerez"
-
-#: ../../printerdrake.pm_.c:860
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "DibarzhoĂš ar voullerez"
-
-#: ../../printerdrake.pm_.c:889 ../../printerdrake.pm_.c:891
-#, fuzzy
-msgid "Printer Device URI"
-msgstr "Trobarzhell ar voullerez"
-
-#: ../../printerdrake.pm_.c:890
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:905
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1006
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Name of printer"
-msgstr "Anv ar moullerez"
-
-#: ../../printerdrake.pm_.c:1008
-#, fuzzy
-msgid "Description"
-msgstr "Spisait dibarzhoĂš"
-
-#: ../../printerdrake.pm_.c:1009
-#, fuzzy
-msgid "Location"
-msgstr "TitouroĂš"
-
-#: ../../printerdrake.pm_.c:1023
-msgid "Preparing printer database..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1114
-#, fuzzy
-msgid "Your printer model"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:1115
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1120 ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "The model is correct"
-msgstr "Ha reizh eo ?"
-
-#: ../../printerdrake.pm_.c:1121 ../../printerdrake.pm_.c:1122
-#: ../../printerdrake.pm_.c:1125
-#, fuzzy
-msgid "Select model manually"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:1141
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:1142
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: ../../printerdrake.pm_.c:1143
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1146
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1222
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "KefluniaĂą ar modem"
-
-#: ../../printerdrake.pm_.c:1223
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1266 ../../printerdrake.pm_.c:1293
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "KefluniaĂą ar proksioĂš"
-
-#: ../../printerdrake.pm_.c:1267
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1294
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1510
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1519
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1523
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1528
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1567
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ha mennout a rit amprouiĂą moullaĂą skrid ?"
-
-#: ../../printerdrake.pm_.c:1584
-#, fuzzy
-msgid "Test pages"
-msgstr "AmprouiĂą ar porzhioĂš"
-
-#: ../../printerdrake.pm_.c:1585
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1589
-#, fuzzy
-msgid "No test pages"
-msgstr "Ya, moullit an div bajenn arnod"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Print"
-msgstr "Moullerez"
-
-#: ../../printerdrake.pm_.c:1592
-#, fuzzy
-msgid "Standard test page"
-msgstr "Diorren"
-
-#: ../../printerdrake.pm_.c:1595
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "O voullaĂą pajenn(oĂš) skrid..."
-
-#: ../../printerdrake.pm_.c:1600
-#, fuzzy
-msgid "Photo test page"
-msgstr "O voullaĂą pajenn(oĂš) skrid..."
-
-#: ../../printerdrake.pm_.c:1604
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "O voullaĂą pajenn(oĂš) skrid..."
-
-#: ../../printerdrake.pm_.c:1612 ../../printerdrake.pm_.c:1749
-msgid "Printing test page(s)..."
-msgstr "O voullaĂą pajenn(oĂš) skrid..."
-
-#: ../../printerdrake.pm_.c:1637
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Pajenn(oĂš) arnod zo bet kaset d'an diaoul moullaĂą.\n"
-"Ur pennadig e c'hell padout a-raok ma loc'hfe a voullerez.\n"
-"Stad ar moullaù :\n"
-"%s\n"
-"\n"
-"Ha mont a ra en-dro reizh ?"
-
-#: ../../printerdrake.pm_.c:1641
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Pajenn(oĂš) arnod zo bet kaset d'an diaoul moullaĂą.\n"
-"Ur pennadig e c'hell padout a-raok ma loc'hfe a voullerez.\n"
-"Ha mont a ra en-dro reizh ?"
-
-#: ../../printerdrake.pm_.c:1648
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1669 ../../printerdrake.pm_.c:2735
-#, fuzzy
-msgid "Raw printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:1687
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1689
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1692 ../../printerdrake.pm_.c:1708
-#: ../../printerdrake.pm_.c:1718
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1695 ../../printerdrake.pm_.c:1734
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1698
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1705 ../../printerdrake.pm_.c:1715
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1710 ../../printerdrake.pm_.c:1720
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1723
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1727
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1731
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1740 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:1747 ../../printerdrake.pm_.c:1748
-#: ../../printerdrake.pm_.c:2719 ../../standalone/drakbackup_.c:743
-#: ../../standalone/drakbackup_.c:2448 ../../standalone/drakfont_.c:580
-#: ../../standalone/drakfont_.c:792
-#, fuzzy
-msgid "Close"
-msgstr "Logodenn USB"
-
-#: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1755
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "O tizenaouiĂą ar rouedad"
-
-#: ../../printerdrake.pm_.c:1744 ../../printerdrake.pm_.c:1756
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "O tizenaouiĂą ar rouedad"
-
-#: ../../printerdrake.pm_.c:1746
-#, fuzzy
-msgid "Print option list"
-msgstr "DibarzhoĂš ar voullerez"
-
-#: ../../printerdrake.pm_.c:1768
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1775
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1797 ../../printerdrake.pm_.c:2224
-#: ../../printerdrake.pm_.c:2488
-msgid "Reading printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1817 ../../printerdrake.pm_.c:1845
-#: ../../printerdrake.pm_.c:1880
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "KefluniaĂą ar proksioĂš"
-
-#: ../../printerdrake.pm_.c:1818
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1821
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1823
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1827
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1828
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1832
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1833 ../../printerdrake.pm_.c:1850
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1846
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1854
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1859
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1867
-#, fuzzy
-msgid "New printer name"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:1870
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1881
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1890
-msgid "Refreshing printer data..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1898 ../../printerdrake.pm_.c:1969
-#: ../../printerdrake.pm_.c:1981
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "KefluniaĂą ar voullerez"
-
-#: ../../printerdrake.pm_.c:1899
-#, fuzzy
-msgid "Starting network..."
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../printerdrake.pm_.c:1933 ../../printerdrake.pm_.c:1937
-#: ../../printerdrake.pm_.c:1939
-#, fuzzy
-msgid "Configure the network now"
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../printerdrake.pm_.c:1934
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Skramm ket kefluniet"
-
-#: ../../printerdrake.pm_.c:1935
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1938
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "KefluniaĂą ar rouedad"
-
-#: ../../printerdrake.pm_.c:1971
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1972
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1982
-#, fuzzy
-msgid "Restarting printing system..."
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:2020
-#, fuzzy
-msgid "high"
-msgstr "Uhel"
-
-#: ../../printerdrake.pm_.c:2020
-#, fuzzy
-msgid "paranoid"
-msgstr "Ankeniet"
-
-#: ../../printerdrake.pm_.c:2021
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2022
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2054
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2055
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2078 ../../printerdrake.pm_.c:2116
-#: ../../printerdrake.pm_.c:2146 ../../printerdrake.pm_.c:2179
-#: ../../printerdrake.pm_.c:2284
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2120
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2150
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2208
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Diuzit lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:2209
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Pe seurt parzhadur a vennit ?"
-
-#: ../../printerdrake.pm_.c:2242
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "KefluniaĂą ar voullerez"
-
-#: ../../printerdrake.pm_.c:2255
-#, fuzzy
-msgid "Installing Foomatic..."
-msgstr "O staliaĂą ar pakad %s"
-
-#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2351
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2806
-msgid "Printer options"
-msgstr "DibarzhoĂš ar voullerez"
-
-#: ../../printerdrake.pm_.c:2321
-msgid "Preparing PrinterDrake..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2338 ../../printerdrake.pm_.c:2893
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "KefluniaĂą ar voullerez"
-
-#: ../../printerdrake.pm_.c:2358
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Mennout a rit kefluniaĂą ur voullerez ?"
-
-#: ../../printerdrake.pm_.c:2370
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2418
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Moullerez"
-
-#: ../../printerdrake.pm_.c:2422
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Setu da heul ar steudadoĂš moullaĂą.\n"
-"Gallout a rit ouzhpennaĂą lod pe gemmaĂą a re a zo."
-
-#: ../../printerdrake.pm_.c:2423
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Setu da heul ar steudadoĂš moullaĂą.\n"
-"Gallout a rit ouzhpennaĂą lod pe gemmaĂą a re a zo."
-
-#: ../../printerdrake.pm_.c:2449
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2467
-#, fuzzy
-msgid "Change the printing system"
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../printerdrake.pm_.c:2472 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Boas"
-
-#: ../../printerdrake.pm_.c:2628 ../../printerdrake.pm_.c:2678
-#: ../../printerdrake.pm_.c:2887
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../printerdrake.pm_.c:2714
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "KefluniaĂą ar modem"
-
-#: ../../printerdrake.pm_.c:2716
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../printerdrake.pm_.c:2720
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2780
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2784
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../printerdrake.pm_.c:2728 ../../printerdrake.pm_.c:2799
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2729 ../../printerdrake.pm_.c:2800
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2810
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2815
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2741 ../../printerdrake.pm_.c:2824
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2833
-#, fuzzy
-msgid "Print test pages"
-msgstr "O voullaĂą pajenn(oĂš) skrid..."
-
-#: ../../printerdrake.pm_.c:2743 ../../printerdrake.pm_.c:2835
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2837
-#, fuzzy
-msgid "Remove printer"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:2789
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../printerdrake.pm_.c:2813
-#, fuzzy
-msgid "Default printer"
-msgstr "Moullerez lec'hel"
-
-#: ../../printerdrake.pm_.c:2814
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2818 ../../printerdrake.pm_.c:2821
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2822
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2827 ../../printerdrake.pm_.c:2830
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2831
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2839
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../printerdrake.pm_.c:2841
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Kefluniadur goude staliaĂą"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Paour"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "http://... a zlefe bezaĂą ar proksi"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "ftp://... a zlefe bezaĂą ar proksi"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Belgian"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Tremenger"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Tremenger ebet"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "An tremegerioĂš ne glot ket"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "N'hellan ket ouzhpennaĂą ur parzhadur da RAID md%d _furmadet_"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "N'hellan ket skrivaĂą e %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid sac'het"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid sac'het (raidtools a vank emichaĂąs ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ket a-walc'h a parzhadurioĂš evit RAID live %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, ur steuĂąvaer urzhiadoĂš mareadek."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"servijout a ra apmd evit evezhiaĂą stad an daspugner hag he enrollaĂą dre "
-"syslog.\n"
-"Gallout a ra ivez servijout da lazhaĂą an ardivink pa vez izel an daspugner."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"SeveniĂą an urzhiadoĂš steuĂąvaet gant an urzhiad at d'ar pred laket pa 'z eo\n"
-"bet sevenet at, ha seveniĂą urzhiadoĂš dre lod pa 'z eo izel a-walc'h ar garg."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Ur goulev standard UNIX eo cron evit seveniĂą goulevioĂš diouzh c'hoant an\n"
-"arveriaded da goulzoĂš mareadek steuĂąvaet. vixie cron a ouzhpenn kalzig a "
-"arc'hweloĂš\n"
-"d'ar cron UNIX diazez, en o zouez surentez ha dibarzhoĂš kefluniaĂą gwelloc'h."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM a zegas implij al logodenn d'an arloadoĂš Linux mod-skrid evel\n"
-"Midnight Commander. ReiĂą a ra tu da seveniĂą obererezhoĂš troc'haĂą-ha-pegaĂą,\n"
-"ha skor evit meuziadoĂš kemperzhel war al letrin."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:414
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Ur servijer evit ar Gwiad Bedel eo Apache. Implijet e vez evit servijaĂą\n"
-"restroĂš HTML ha CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"An diaoul gourservijer kenrouedad (anvet inetd ordinal) a loc'h ur\n"
-"bochad a servijoĂš kenrouedad all diouzh an ezhomm. E karg loc'haĂą meur a "
-"servijoĂš\n"
-"eo, en o zouez telnet, ftp, rsh, and rlogin. DizoberiaĂą inetd a zizoberia\n"
-"an holl servijoĂš m'eo eĂą atebek warno."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ar pakad-maĂą a garg ar stokellaoueg diuzet evel termenet e\n"
-"/etc/sysconfig/keyboard. Dre ar maveg kbdconfig e c'hell bezaĂą diuzet\n"
-"kement-se. Gwell deoc'h leuskel se gweredekaet war darn vuiaĂą an ardivinkoĂš."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"An diaoul moullaĂą ret evit ma dafez en-ro reizh lpr eo lpd. Dre vras\n"
-"ez eo ur servijer a vera dleadoĂš moullaĂą evir ar voullerez(ed)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) a zo ur Servijer AnvioĂš Domani (DNS) a zo implijet evit\n"
-"amdreiĂą anvioĂš ostiz e chomlec'hioĂš IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Evit marc'haĂą ha divarc'haĂą poentoĂš marc'haĂą an holl ReizhiadoĂš RestroĂš\n"
-"Rouedad (NFS), SMB (Lan Manager/Windows) ha NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Oberia/Dizoberia an holl etrefasoĂš rouedad kefluniet da laĂąsaĂą\n"
-"da vare al loc'haĂą."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS a zo ur c'homenad brudet evit rannaĂą restroĂš dre rouedadoĂš TCP/IP.\n"
-"Ar servij-maĂą a bourvez arc'hweloĂš ur servijer NFS, a vez kefluniaet dre ar\n"
-"restr /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS a zo ur c'homenad brudet evit rannaĂą restroĂš dre rouedadoĂš\n"
-"TCP/IP. Ar servij-maĂą a bourvez un arc'hwel morailhaĂą restroĂš NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"SkoraĂą PCMCIA a zegas an tu da implijonut traoĂš evel ethernet ha modemoĂš\n"
-"e urzhiataeroĂš hezoug. Ne vo ket kroget hep bezaĂą bet kefluniet, rak-se eo "
-"diarvar\n"
-"e staliaĂą war ardivinkoĂš n'o deus ket ezhomm anezhaĂą."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ar c'hartenner porzhioĂš a vera kevreadennoĂš RPC, a zo implijet gant\n"
-"komenadoĂš evel NFS ha NIS. Ar servijer kartenn-porzhioĂš a rankfe mont en-"
-"dro\n"
-"war ardivinkoĂš anezho servijerien komenadoĂš a implij ar reizhiad RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Ur Gwazour Treuzdougen Postel eo Postfix, a zo ar goulev a\n"
-"zilech posteloĂš etre un ardivink hag un all."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Enroll hag assav poul dizurzh ar reizhiad evit genel niveroĂš\n"
-"dargouezhek gant gwelloc'h perzhded."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"An diaoul routed a ro an tu da vremanaat ent emgefreek an taolenn henchaĂą\n"
-"IP dre ar c'homenad RIP. Tra ma vez implijet aliesig RIP war rouedadoĂš "
-"bihan,\n"
-"ezhomm a zo komenadoĂš henchaĂą kemplezhoc'h evit rouedadoĂš rouestlet."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ar c'homenad rstat a ro tu da implijerien ur rouedad da zastum\n"
-"muzulioĂš barregezh diwar ne vern pe ardivink er rouedad-se."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ar c'homenad rusers a ro tu da implijerien ur rouedad da anavezout piv\n"
-"a zo kevreet ouzh ardivinkoĂš all a respont."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Ar c'homenad rwho a bourchas da implijerien a-bell roll an holl arveriaded a "
-"zo\n"
-"kevreet ouzh un ardivink ma da en-dro warnaĂą an diaoul rwhod (heĂąvel ouzh "
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog a zo ur gwazerezh ma enroll drezaĂą an diaouled niverus o "
-"c'hemennadoĂš\n"
-"e kerzhlevrioĂš liesseurt ar reizhiad. Ur mennozh mat eo seveniĂą ingal syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Enaou ha dizenaou ar servijer FontoĂš X da vare al loc'haĂą hag al lazhaĂą."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Dibabit pe servijoĂš a zlefe bezaĂą laĂąset ent emgefreek pa loc'her"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Moullerez"
-
-#: ../../services.pm_.c:123
-#, fuzzy
-msgid "Internet"
-msgstr "dedennus"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:923
-#, fuzzy
-msgid "System"
-msgstr "Reizhiad/Diazez"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "StlennvonioĂš"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "trobarzhell"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Ho evezh"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "OuzhpennaĂą"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Gwrizienn"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Meuziad LaĂąsaĂą"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Rann"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "AmprouiĂą ar c'hefluniadur"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "dedennus"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Liesvedia"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Diorren"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Anv ar gevreadenn"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Etrefas arveriad/X"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Anv ar servijer SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "C'hoarioĂš"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "O staliaĂą pakadoĂš..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"N'hellaĂą ket lenn ho taolenn barzhaĂą, re vrein eo evidon :(\n"
-"Klask a rin kenderc'hel en ur ziverkaĂą ar parzhadurioĂš siek"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fazi!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Kefluniadur goude staliaĂą"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Kefluniadur goude staliaĂą"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:83
-#, fuzzy
-msgid "Creating auto install floppy"
-msgstr "O krouiĂą ur bladennig staliaĂą emgefreek"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:548
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gourc'hemennoĂš!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "StaliaĂą"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "OuzhpennaĂą un arveriad"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "O furmadiĂą ar restr saveteiĂą %s"
-
-#: ../../standalone/drakbackup_.c:438
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:439
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:443
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:465
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:544 ../../standalone/drakbackup_.c:591
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:592 ../../standalone/drakbackup_.c:656
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:604
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:605
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:655
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:663
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-msgid ""
-"\n"
-" FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:676
-#, fuzzy
-msgid " Error during mail sending. \n"
-msgstr "Fazi en ur lenn ar restr %s"
-
-#: ../../standalone/drakbackup_.c:717 ../../standalone/drakbackup_.c:728
-#: ../../standalone/drakbackup_.c:739 ../../standalone/drakfont_.c:788
-#, fuzzy
-msgid "File Selection"
-msgstr "Diuzadenn strollad pakadoĂš"
-
-#: ../../standalone/drakbackup_.c:744
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:779
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:780
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:781
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:782
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:783
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:784
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:801
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Dibabit ar pakadoĂš a vennit staliaĂą, mar plij."
-
-#: ../../standalone/drakbackup_.c:828
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:829 ../../standalone/drakbackup_.c:853
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:851 ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Lemel ar steudad"
-
-#: ../../standalone/drakbackup_.c:889
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:928
-#, fuzzy
-msgid "Users"
-msgstr "Anv arveriad"
-
-#: ../../standalone/drakbackup_.c:954
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:957
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:962
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Klaskit adarre mar plij"
-
-#: ../../standalone/drakbackup_.c:972
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Klaskit adarre mar plij"
-
-#: ../../standalone/drakbackup_.c:978
-#, fuzzy
-msgid "Remember this password"
-msgstr "Tremenger ebet"
-
-#: ../../standalone/drakbackup_.c:1042 ../../standalone/drakbackup_.c:2038
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakbackup_.c:1049 ../../standalone/drakbackup_.c:2046
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Diuzit lugerezh ar voullerez"
-
-#: ../../standalone/drakbackup_.c:1075 ../../standalone/drakbackup_.c:2879
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1078 ../../standalone/drakbackup_.c:2883
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Dibabit reizhadur ho stokellaoueg, mar plij."
-
-#
-#: ../../standalone/drakbackup_.c:1084 ../../standalone/drakbackup_.c:2895
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Klikit war ur parzhadur mar plij"
-
-#: ../../standalone/drakbackup_.c:1090 ../../standalone/drakbackup_.c:2901
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1096
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Dibabit ar pakadoĂš a vennit staliaĂą, mar plij."
-
-#: ../../standalone/drakbackup_.c:1102
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1143
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:1146
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1152 ../../standalone/drakbackup_.c:1193
-#: ../../standalone/drakbackup_.c:2003
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1185 ../../standalone/drakbackup_.c:1995
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:2009
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:1257
-#, fuzzy
-msgid "Network"
-msgstr "Taolenn"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1287 ../../standalone/drakbackup_.c:1291
-#: ../../standalone/drakbackup_.c:1295
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1288 ../../standalone/drakbackup_.c:1292
-#: ../../standalone/drakbackup_.c:1295
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1289 ../../standalone/drakbackup_.c:1293
-#: ../../standalone/drakbackup_.c:1295
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1290 ../../standalone/drakbackup_.c:1294
-#: ../../standalone/drakbackup_.c:1295
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1302
-#, fuzzy
-msgid "Use daemon"
-msgstr "Anv arveriad"
-
-#: ../../standalone/drakbackup_.c:1307
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Dibabit ar pakadoĂš a vennit staliaĂą, mar plij."
-
-#: ../../standalone/drakbackup_.c:1313
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Implijout gwelladur ar bladenn galet ?"
-
-#: ../../standalone/drakbackup_.c:1319
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Rouedad/Diaouled"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1359
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1401
-msgid "What"
-msgstr "Petra"
-
-#: ../../standalone/drakbackup_.c:1406
-msgid "Where"
-msgstr "Pelec'h"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "When"
-msgstr "Pa"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "More Options"
-msgstr "DibarzhoÚ ar mollad :"
-
-#: ../../standalone/drakbackup_.c:1435 ../../standalone/drakbackup_.c:2791
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/drakbackup_.c:1453
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Dibabit ar pakadoĂš a vennit staliaĂą, mar plij."
-
-#: ../../standalone/drakbackup_.c:1455
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1466
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1530
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Dibabit ar pakadoĂš a vennit staliaĂą, mar plij."
-
-#: ../../standalone/drakbackup_.c:1531
-#, fuzzy
-msgid "Backup system"
-msgstr "KefluniaĂą reizhiadoĂš restroĂš"
-
-#: ../../standalone/drakbackup_.c:1532
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1535
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1617
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1618
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1620
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1622
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1624
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1625
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1626
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Parzhadur"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1629
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1631
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1633
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1743
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1745
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1776
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1777
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1876
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/drakbackup_.c:1894
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1912
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1962
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:1964
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:1992
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:2073
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Assevel adalek ar pladennig"
-
-#: ../../standalone/drakbackup_.c:2075
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2133
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:2135
-#, fuzzy
-msgid "Other Media"
-msgstr "All"
-
-#: ../../standalone/drakbackup_.c:2141
-#, fuzzy
-msgid "Restore system"
-msgstr "StaliaĂą ar reizhiad"
-
-#: ../../standalone/drakbackup_.c:2142
-#, fuzzy
-msgid "Restore Users"
-msgstr "AdaozaĂą adalek ar restr"
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Restore Other"
-msgstr "AdaozaĂą adalek ar restr"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2149
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2150
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2207
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2215
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Neuziet"
-
-#: ../../standalone/drakbackup_.c:2256 ../../standalone/drakbackup_.c:2281
-#: ../../standalone/drakbackup_.c:2302 ../../standalone/drakbackup_.c:2323
-#: ../../standalone/drakbackup_.c:2341 ../../standalone/drakbackup_.c:2373
-#: ../../standalone/drakbackup_.c:2389 ../../standalone/drakbackup_.c:2409
-#: ../../standalone/drakbackup_.c:2428 ../../standalone/drakbackup_.c:2450
-#: ../../standalone/drakfont_.c:578
-msgid "Help"
-msgstr "Skoazell"
-
-#: ../../standalone/drakbackup_.c:2259 ../../standalone/drakbackup_.c:2286
-#: ../../standalone/drakbackup_.c:2305 ../../standalone/drakbackup_.c:2326
-#: ../../standalone/drakbackup_.c:2344 ../../standalone/drakbackup_.c:2392
-#: ../../standalone/drakbackup_.c:2412 ../../standalone/drakbackup_.c:2431
-msgid "Previous"
-msgstr "Diaraog"
-
-#: ../../standalone/drakbackup_.c:2261 ../../standalone/drakbackup_.c:2328
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "EnrollaĂą"
-
-#: ../../standalone/drakbackup_.c:2307
-#, fuzzy
-msgid "Build Backup"
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:2346 ../../standalone/drakbackup_.c:3023
-#, fuzzy
-msgid "Restore"
-msgstr "AdaozaĂą adalek ar restr"
-
-#: ../../standalone/drakbackup_.c:2394 ../../standalone/drakbackup_.c:2414
-#: ../../standalone/drakbackup_.c:2435
-msgid "Next"
-msgstr "A heul"
-
-#: ../../standalone/drakbackup_.c:2468
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2489
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2512
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Dibabit pakadoĂš da staliaĂą"
-
-#: ../../standalone/drakbackup_.c:2540
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2563
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../standalone/drakbackup_.c:2584
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../standalone/drakbackup_.c:2606
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Diuzit ar yezh da implijout, mar plij."
-
-#: ../../standalone/drakbackup_.c:2628
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2649
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2729
-#, fuzzy
-msgid "Backup system files"
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:2731
-#, fuzzy
-msgid "Backup user files"
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:2733
-#, fuzzy
-msgid "Backup other files"
-msgstr "Restr gwareziĂą siek"
-
-#: ../../standalone/drakbackup_.c:2735 ../../standalone/drakbackup_.c:2766
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2757
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2761
-#, fuzzy
-msgid "Sending files..."
-msgstr "EnrollaĂą er restr"
-
-#: ../../standalone/drakbackup_.c:2831
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2889
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/drakbackup_.c:2907
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2913
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Dibabit ar pakadoĂš a vennit staliaĂą, mar plij."
-
-#: ../../standalone/drakbackup_.c:2979
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/drakbackup_.c:3010
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/drakbackup_.c:3014
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/drakbackup_.c:3018
-#, fuzzy
-msgid "Backup Now"
-msgstr "KefluniaĂą reizhiadoĂš restroĂš"
-
-#: ../../standalone/drakbackup_.c:3043
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3094
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3124
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3132
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3171
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3197 ../../standalone/drakbackup_.c:3272
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-"Copyright (C) 2001 MandrakeSoft gant DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3199 ../../standalone/drakbackup_.c:3274
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3213
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3251
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3260
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3288
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Staliadur %s a zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#: ../../standalone/drakfloppy_.c:64
-msgid "usage: drakfloppy\n"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:68
-#, fuzzy
-msgid "-misc-Fixed-Medium-r-*-*-*-140-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/drakfloppy_.c:69
-#, fuzzy
-msgid "Module name"
-msgstr "DibarzhoÚ ar mollad :"
-
-#: ../../standalone/drakfloppy_.c:69
-#, fuzzy
-msgid "Size"
-msgstr "Ment: %s"
-
-#: ../../standalone/drakfloppy_.c:74 ../../standalone/drakfloppy_.c:373
-#, fuzzy
-msgid "drakfloppy"
-msgstr "Assevel adalek ar pladennig"
-
-#: ../../standalone/drakfloppy_.c:91
-#, fuzzy
-msgid "boot disk creation"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../standalone/drakfloppy_.c:99 ../../standalone/drakfloppy_.c:112
-msgid "default"
-msgstr "dre ziouer"
-
-#: ../../standalone/drakfloppy_.c:115
-#, c-format
-msgid "DrakFloppy Error: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:126
-#, fuzzy
-msgid "kernel version"
-msgstr "KefluniaĂą ar proksioĂš"
-
-#: ../../standalone/drakfloppy_.c:132
-#, fuzzy
-msgid "General"
-msgstr "Rummel"
-
-#: ../../standalone/drakfloppy_.c:137
-#, fuzzy
-msgid "Expert Area"
-msgstr "Mod mailh"
-
-#: ../../standalone/drakfloppy_.c:140
-msgid "mkinitrd optional arguments"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:141
-#, fuzzy
-msgid "Add a module"
-msgstr "OuzhpennaĂą un arveriad"
-
-#: ../../standalone/drakfloppy_.c:161
-#, fuzzy
-msgid "force"
-msgstr "Dilec'hiaĂą"
-
-#: ../../standalone/drakfloppy_.c:162
-msgid "if needed"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:163
-msgid "omit scsi modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:164
-msgid "omit raid modules"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:200
-#, fuzzy
-msgid "Remove a module"
-msgstr "EilpennaĂą urzh ar pajennoĂš"
-
-#: ../../standalone/drakfloppy_.c:222
-msgid "Output"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:234
-msgid "Build the disk"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:422
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:427
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:429
-#, c-format
-msgid "Unable to fork: %s"
-msgstr ""
-
-#: ../../standalone/drakfloppy_.c:433
-#, c-format
-msgid ""
-"Unable to close properly mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:230
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:232
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:254
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s ket kavet"
-
-#: ../../standalone/drakfont_.c:262 ../../standalone/drakfont_.c:304
-#: ../../standalone/drakfont_.c:353 ../../standalone/drakfont_.c:413
-#: ../../standalone/drakfont_.c:422 ../../standalone/drakfont_.c:448
-#: ../../standalone/drakfont_.c:460 ../../standalone/drakfont_.c:473
-#, fuzzy
-msgid "done"
-msgstr "Graet"
-
-#: ../../standalone/drakfont_.c:266
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:302
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:305
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:328
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:351
-#, fuzzy
-msgid "Fonts copy"
-msgstr "FurmadiĂą ar bladennig"
-
-#: ../../standalone/drakfont_.c:354
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "O prientiĂą ar staliadur"
-
-#: ../../standalone/drakfont_.c:358
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:362
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:369 ../../standalone/drakfont_.c:385
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:373 ../../standalone/drakfont_.c:389
-#: ../../standalone/drakfont_.c:409
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:378 ../../standalone/drakfont_.c:393
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:400
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:404
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:417
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:458 ../../standalone/drakfont_.c:468
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:470
-#, fuzzy
-msgid "xfs restart"
-msgstr "strishaat"
-
-#: ../../standalone/drakfont_.c:477 ../../standalone/drakfont_.c:761
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:551
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "FurmadiĂą parzhadurioĂš"
-
-#: ../../standalone/drakfont_.c:566
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "O tistaliaĂą ar RPMoĂš"
-
-#: ../../standalone/drakfont_.c:571
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Kefluniadur"
-
-#: ../../standalone/drakfont_.c:573
-#, fuzzy
-msgid "Font List"
-msgstr "Poent marc'haĂą"
-
-#: ../../standalone/drakfont_.c:740
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Dibabit ar parzhadur a vennit furmadiĂą"
-
-#: ../../standalone/drakfont_.c:744
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:748
-#, fuzzy
-msgid "StarOffice"
-msgstr "Burev"
-
-#: ../../standalone/drakfont_.c:752
-msgid "Abiword"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:756
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Moullerez"
-
-#: ../../standalone/drakfont_.c:793
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:829
-#, fuzzy
-msgid "Install List"
-msgstr "StaliaĂą ar reizhiad"
-
-#: ../../standalone/drakfont_.c:859
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:896
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-#, fuzzy
-msgid "Selected All"
-msgstr "Diuzit ar restr"
-
-#: ../../standalone/drakfont_.c:898
-#, fuzzy
-msgid "Remove List"
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../standalone/drakfont_.c:915 ../../standalone/drakfont_.c:935
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:916
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:917
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:918
-#, fuzzy
-msgid "Post Install"
-msgstr "StaliaĂą"
-
-#: ../../standalone/drakfont_.c:936
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:937
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Dilezel ar staliadur"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:196
-#, fuzzy
-msgid "Internet Connection Sharing"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:122
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:134
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:135
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-#, fuzzy
-msgid "disable"
-msgstr "Taolenn"
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139 ../../standalone/drakgw_.c:164
-#, fuzzy
-msgid "reconfigure"
-msgstr "KefluniaĂą X"
-
-#: ../../standalone/drakgw_.c:142
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "O tinoiĂą trobarzhelloĂš..."
-
-#: ../../standalone/drakgw_.c:150
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:159
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:160
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-#, fuzzy
-msgid "enable"
-msgstr "Taolenn"
-
-#: ../../standalone/drakgw_.c:171
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:176
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:197
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:223
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:224
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "dedennus"
-
-#: ../../standalone/drakgw_.c:232
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:233
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:239
-msgid "Network interface"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:240
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:249
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:267
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Skramm ket kefluniet"
-
-#: ../../standalone/drakgw_.c:268
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:273
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Kefluniadur goude staliaĂą"
-
-#: ../../standalone/drakgw_.c:274
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "KefluniaĂą ar modem"
-
-#: ../../standalone/drakgw_.c:276
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:288
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:293
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:294
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP ar servijer SMB"
-
-#: ../../standalone/drakgw_.c:295
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:302
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:313
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:321
-#, fuzzy
-msgid "Firewalling configuration detected!"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../standalone/drakgw_.c:322
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:329
-#, fuzzy
-msgid "Configuring..."
-msgstr "KefluniaĂą IDE"
-
-#: ../../standalone/drakgw_.c:330
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:366
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "O staliaĂą ar pakad %s"
-
-#: ../../standalone/drakgw_.c:549
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:566
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:567
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:568
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:573
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/drakgw_.c:580
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Kefluniadur ar rouedad"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "marc'haù sac'het : "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Anv an ostiz : "
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "dedennus"
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Seurt : "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Treuzell : "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "dedennus"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "KefluniaĂą servijoĂš"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Driver"
-msgstr "Servijer"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "dedennus"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Meuziad LaĂąsaĂą"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Skoazeller..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "AmprouiĂą ar c'hefluniadur"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "Kefluniadur"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Bevaat"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Bevaat"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Lugerezh ar voullerez"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Treuzell"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:51
-msgid "Setting security level"
-msgstr "O termeniĂą al live surentez"
-
-#: ../../standalone/draksec_.c:57
-#, fuzzy
-msgid "Setting security user"
-msgstr "O termeniĂą al live surentez"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Dibabit ar benveg a vennit staliaĂą"
-
-#: ../../standalone/drakxtv_.c:55
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadian (Kebek)"
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "China (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:73
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "France [SECAM]"
-msgstr "Gall"
-
-#: ../../standalone/drakxtv_.c:74
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandek"
-
-#: ../../standalone/drakxtv_.c:74
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:75
-#, fuzzy
-msgid "Australia"
-msgstr "a-steud"
-
-#: ../../standalone/drakxtv_.c:75
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:76
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:77
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:113
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:115
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:116
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:120
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:128
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:131
-#, fuzzy
-msgid "There was an error while scanning for TV channels"
-msgstr "Ur fazi a zo bet en ur staliaù ar pakadoÚ :"
-
-#: ../../standalone/drakxtv_.c:132
-msgid "XawTV isn't installed!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:135
-msgid "Have a nice day!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:136
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:148
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:149
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Dibabit reizhadur ho stokellaoueg, mar plij."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-#, fuzzy
-msgid "Change Cd-Rom"
-msgstr "KemmaĂą ar spister"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Kemmit ho Cd-Rom!\n"
-"\n"
-"Lakait el lenner ar Cd-Rom warnaĂą an diketenn \"%s\" mar plij ha gwaskit Mat "
-"eo da c'houde.\n"
-"Ma n'emaĂą ket ganeoc'h gwaskit NullaĂą evit chom hep staliaĂą ar Cd-Rom-se."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:516
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "/File/_New"
-msgstr "RestroÚ :\n"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Restr/_EnrollaĂą"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Restr/-"
-
-#: ../../standalone/logdrake_.c:108
-#, fuzzy
-msgid "/_Options"
-msgstr "Parzhadur"
-
-#: ../../standalone/logdrake_.c:109
-#, fuzzy
-msgid "/Options/Test"
-msgstr "Parzhadur"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Anv arveriad"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "AmprouiĂą ar porzhioĂš"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-#, fuzzy
-msgid "search"
-msgstr "Klask"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "O vrasjediĂą"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-#, fuzzy
-msgid "Choose file"
-msgstr "Dibabit un obererezh"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-#, fuzzy
-msgid "Content of the file"
-msgstr "Anv ar gevreadenn"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:392
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "O prientiĂą ar staliadur"
-
-#: ../../standalone/logdrake_.c:407
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "KefluniaĂą ar proksioĂš"
-
-#: ../../standalone/logdrake_.c:408
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:416
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:419
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:420
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:421
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:424
-#, fuzzy
-msgid "service setting"
-msgstr "dedennus"
-
-#: ../../standalone/logdrake_.c:425
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:435
-#, fuzzy
-msgid "load setting"
-msgstr "O furmadiĂą"
-
-#: ../../standalone/logdrake_.c:436
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:449
-#, fuzzy
-msgid "alert configuration"
-msgstr "KefluniaĂą ar proksioĂš"
-
-#: ../../standalone/logdrake_.c:450
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:493
-#, fuzzy
-msgid "Save as.."
-msgstr "Meuziad LaĂąsaĂą"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb kavet ebet\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Kendarvan an trede nozelenn ?"
-
-#: ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#: ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "O tinoiĂą trobarzhelloĂš..."
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Diuzit ur gartenn c'hrafek"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Trobarzhell loc'haĂą"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Dibabit ho yezh"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Diuzit renkad ar staliadur"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "DinoiĂą ar bladenn galet"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "KefluniaĂą al logodenn"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Dibabit ho stokellaoueg"
-
-#: ../../steps.pm_.c:19
-#, fuzzy
-msgid "Security"
-msgstr "rodellek"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "KefluniaĂą reizhiadoĂš restroĂš"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "FurmadiĂą parzhadurioĂš"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Dibabit pakadoĂš da staliaĂą"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "StaliaĂą ar reizhiad"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "OuzhpennaĂą un arveriad"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "KefluniaĂą ur rouedad"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "KefluniaĂą servijoĂš"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "StaliaĂą ar c'harger loc'haĂą"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "KrouiĂą ur bladennig loc'haĂą"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "KefluniaĂą X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "StaliaĂą ar reizhiad"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Dilezel ar staliadur"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Fazi en ur zigeriù %s evit skrivaù : %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "o lenn ar c'hefluniadur"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Gortozit mar plij, o prientiĂą ar staliadur"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "DibarzhoĂš ar voullerez NetWare"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Burev"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "TitouroĂš"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Workstation"
-msgstr "TitouroĂš"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "TitouroĂš"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Database"
-msgstr "StlennvonioĂš"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Mennout a rit amprouiĂą ar c'hefluniadur ?"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Teuliadur"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "KefluniaĂą ar proksioĂš"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Kefluniadur"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "TitouroĂš"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servijer"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "DibarzhoĂš ar voullerez NetWare"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Teuliadur"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "dedennus"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Liesvedia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "TitouroĂš"
-
-#~ msgid "Complete (%dMB)"
-#~ msgstr "Boas (%dMo)"
-
-#~ msgid "Minimum (%dMB)"
-#~ msgstr "BihanaĂą (%d Mo)"
-
-#~ msgid "Recommended (%dMB)"
-#~ msgstr "Erbedet (%dMo)"
-
-#~ msgid "CDROM / DVDROM"
-#~ msgstr "CDROM / DVDROM"
-
-#, fuzzy
-#~ msgid "Utilities"
-#~ msgstr "MavegoĂš/Skrid"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Marc'haĂą"
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ebet"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Dibabit ar ment nevez"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "DibarzhoĂš ar voullerez lpd a-bell"
-
-#~ msgid "You may now provide options to module %s."
-#~ msgstr "BremaĂą e c'hellit pourvezaĂą e zibarzhoĂš d'ar mollad %s"
-
-#~ msgid "mount failed"
-#~ msgstr "marc'haĂą sac'het"
-
-#~ msgid "Low"
-#~ msgstr "Izel"
-
-#~ msgid "Medium"
-#~ msgstr "Etre"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Nebeut a wellaenoĂš evit al live surentez-maĂą, an hini pouezusaĂą eo bezaĂą\n"
-#~ "muioc'h a evezhiadennoĂš hag a wiriadennoĂš surentez."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Liesvedia"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Mailh"
-
-#, fuzzy
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "BremaĂą e c'hellit diuz ho takad-eur diouzh al lec'h ma chomit ennaĂą.\n"
-#~ "\n"
-#~ "\n"
-#~ "Linux a vera an eur e GMT pe \"Greenwich Mean Time\" hag e amdreiĂą a ra\n"
-#~ "en eur lec'hel hervez an takad-eur hoc'h eus diuzet."
-
-#, fuzzy
-#~ msgid "Connect to Internet"
-#~ msgstr "Anv ar gevreadenn"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Anv ar gevreadenn"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "KefluniaĂą ur rouedad"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Da beseurt pladenn e mennit dilec'hiaĂą ?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Dibabit ar pakadoĂš a vennit staliaĂą, mar plij."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "TitouroĂš"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "TitouroĂš"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "Anv arveriad"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server. It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "Ur servijer evit ar Gwiad Bedel eo Apache. Implijet e vez evit servijaĂą\n"
-#~ "restroĂš HTML ha CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) a zo ur Servijer AnvioĂš Domani (DNS) a zo implijet evit\n"
-#~ "amdreiĂą anvioĂš ostiz e chomlec'hioĂš IP."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#~ msgid "Active"
-#~ msgstr "Bevaat"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Ur voullerez, doare \"%s\", zo bet dinoet war "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Trobarzhell voullerez lec'hel"
-
-#~ msgid "Printer Device"
-#~ msgstr "Trobarzhell ar voullerez"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Dibabit ar ment a vennit staliaĂą"
-
-#~ msgid "Total size: "
-#~ msgstr "Ment hollek : "
-
-#~ msgid "Please wait, "
-#~ msgstr "Gortozit mar plij,"
-
-#~ msgid "Total time "
-#~ msgstr "Amzer hollek"
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Implijout ar c'hefluniadur o ren evit X11 ?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Ouzh pe drobarzhell eo luget ho moullerez \n"
-#~ "(taolit evezh /dev/lp0 a zo kevatal da LPT1:) ?\n"
-
-#~ msgid "New"
-#~ msgstr "Nevez"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Amsklaer (%s), bezit spisoc'h\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr "? (%s dre ziouer)"
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "Ho tibab ? (%s dre ziouer, skrivit `none' evit hini ebet)"
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Dibabit ar reizhadur a glot gant ho stokellaoueg er roll a-us"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Diuzit :\n"
-#~ "\n"
-#~ " - Neuziet : Ma 'z oc'h kustumet a-walc'h gant GNU/Linux, tu vo neuze "
-#~ "deoc'h\n"
-#~ " dibab an implij pennaĂą evit ho ardivink. Sellit a-is evit munudoĂš.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Mailh : Ma 'z oc'h en ho pleud gant GNU/Linux ha mennet da seveniù\n"
-#~ " ur staliadur neuziet-tre. Evel evit ar renkad staliaĂą \"Neuziet\" e "
-#~ "vo\n"
-#~ " tu deoc'h diuz an implij evit hor reizhiad.\n"
-#~ " Hogen mar plij, NA ZIBABIT KET SE NEMET MA OUZIT PEZH EMAOC'H OC'H "
-#~ "OBER !"
-
-#, fuzzy
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "\t* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ "\t at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ "\t will then have a complete collection of software installed in order "
-#~ "to compile, debug and format source code,\n"
-#~ "\t or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "\t* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ "\t SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ "\t server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "An dibaboĂš liessek evit implij ho ardivink (en ur c'houlakaat neuze hoc'h "
-#~ "eus\n"
-#~ "dibabet pe \"Neuziet\" pe \"Mailh\" da renkad staliaĂą) a zo evel a-"
-#~ "heul :\n"
-#~ "\n"
-#~ " - Boas : dibabit se ma 'z oc'h mennet da implijout ho ardivink dreist-"
-#~ "holl\n"
-#~ " evit un implij pemdeziek (labour burev, aozerezh grafikoĂš hag all). "
-#~ "Na\n"
-#~ " c'hortozit ket e vije staliaet nep kempuner, maveg diorren h.a.\n"
-#~ "\n"
-#~ " - Diorren : evel m'hen diskouez an anv. Dibabit se ma 'z oc'h mennet "
-#~ "da\n"
-#~ " implijout ho ardivink dreist-holl evit diorren meziantoĂš. Neuze ho po "
-#~ "un\n"
-#~ " heuliad klok a meziantoĂš staliet a-benn kempunaĂą, dizraenaĂą ha "
-#~ "furmadiĂą\n"
-#~ " kod tarzh, pe grouiĂą pakadoĂš meziantel.\n"
-#~ "\n"
-#~ " - Servijer : dibabit se m'eo gouestlet an ardivink a stalhit Mandrake "
-#~ "Linux\n"
-#~ " warnaĂą da vezaĂą impliet evel servijer. ur servijer restroĂš (NFS pe "
-#~ "SMB),\n"
-#~ " ur servijer moullaĂą (moullaĂą diouzh komenad Unix lp (line printer) pe "
-#~ "zoare\n"
-#~ " Windows SMB), ur servijer dilesadur (NIS), ur servijer stlennvon hag "
-#~ "all.\n"
-#~ " Da heul, na c'hortozit staliadur tamm kinkladur ebet (KDE, "
-#~ "GNOME...).\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Gallout a rit bremaĂą diuz ar strollad pakadoĂš a vennit\n"
-#~ "staliaĂą pe vremanaat.\n"
-#~ "\n"
-#~ "DrakX a glasko neuze hag-eĂą hoc'h eus egor a-walc'h evit staliaĂą an holl "
-#~ "anezho.\n"
-#~ "Ma n'hoc'h eus ket, e kemenno deoc'h. Ma vennit kenderc'hel evelato, e "
-#~ "seveno staliadur\n"
-#~ "an holl strolladoĂš diuzet hogen e laosko pakadoĂš 'zo dezho nebeutoc'h a\n"
-#~ "dalvoudegezh. E traoĂą ar roll e c'hellit diuz an dibarzh\n"
-#~ "\"Diuz pakadoĂš unan hag unan\" ; en degouezh-se e vo ret deoc'h furchal\n"
-#~ "a-dreuz tremen 1000 pakad..."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Gallout a rit bremaĂą skrivaĂą dibarzhoĂš sifrennaĂą. Ma n'oc'h ket sur "
-#~ "petra\n"
-#~ "skrivaĂą, an titouroĂš reizh ho po digant ho PMG."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ " * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ " You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ " ask your network administrator.\n"
-#~ "\n"
-#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ " \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Skrivit :\n"
-#~ "\n"
-#~ " - Chomlec'h IP : m'eo dianav deoc'h, goulennit digant merour ho "
-#~ "rouedad.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Rouedmaskl : \"255.255.255.0\" a zo peurvuiaù un dibab mat. M'hoc'h "
-#~ "eus\n"
-#~ "douetaĂąs, goulennit digant merour ho rouedad.\n"
-#~ "\n"
-#~ "\n"
-#~ " - IP emgefreek : Ma ra ho rouedad gant ar c'homenad bootp pe dhcp, "
-#~ "diuzit \n"
-#~ "an dibarzh-se. Ma vez diuzet, n'eus ezhomm talvoud ebet er \"Chomlec'h IP"
-#~ "\".\n"
-#~ "M'hoc'h eus douetaĂąs, goulennit digant merour ho rouedad.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ma implij ho rouedad NIS, diuzit \"Implijout NIS\". Ma ne ouzit ket, "
-#~ "goulennit\n"
-#~ "digant merour ho rouedad."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Gallout a rit bremaĂą skrivaĂą dibarzhoĂš sifrennaĂą. Ma n'oc'h ket sur "
-#~ "petra\n"
-#~ "skrivaĂą, an titouroĂš reizh ho po digant ho PMG."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Ma implijit proksioĂš, keflugnit anezho bremaĂą mar plij. Ma ne ouzit ket "
-#~ "hag\n"
-#~ "e rankit implijout proksioĂš, goulennit digant merour ho rouedad pe ho PMG."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "StaliaĂą pakadoĂš rinegouriezh a c'hellit m'eo bet kefluniet reizh ho\n"
-#~ "kevreadenn ouzh ar Genrouedad. Dibabit da gentaĂą ur melezour a vennit "
-#~ "ezkargaĂą\n"
-#~ "pakadoĂš diwarnaĂą ha da c'houde diuzit ar pakadoĂš da staliaĂą.\n"
-#~ "\n"
-#~ "Taolit evezh e rankit diuz ar melezour hag ar rinegouriezh hervez al\n"
-#~ "lezennoĂš o ren du-se."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "BremaĂą e c'hellit krouiĂą unan pe vuioc'h a gont(oĂš) arveriad \"boutin\",\n"
-#~ "dre enebiez ouzh ar gont arveriad \"dreistwiriet\", root hec'h anv. "
-#~ "Gallout\n"
-#~ "a rit krouiĂą unan pe vuioc'h a gont(oĂš) evit kement den a fell deoc'h\n"
-#~ "aotren da implijout an urzhiataer. Taolit evezh pep kont arveriad he\n"
-#~ "devo he dibarzhoĂš dezhi (endro grafikel, kefluniadur ar goulevioĂš,\n"
-#~ "h.a.) hag he renkell \"Er-gĂŞr\" dezhi, ma vo enrollet an dibarzhoĂš-se\n"
-#~ "enni.\n"
-#~ "\n"
-#~ "\n"
-#~ "Da gentaĂą holl, krouit ur gont evidoc'h-chwi ! Ha pa vefec'h arveriad "
-#~ "nemetaĂą\n"
-#~ "an ardivink, ARABAT deoc'h ereaĂą evel root evit implij pemdeziek ar "
-#~ "reizhiad : \n"
-#~ "arvarus-kenaĂą eo a-fet surentez. Ur fazi stokell a zo a-walc'h evit "
-#~ "lakaat\n"
-#~ "boud ho reizhiad.\n"
-#~ "\n"
-#~ "\n"
-#~ "Gant se, gwelloc'h vije deoc'h ereaĂą ouzh ar reizhiad en ur implijout ar\n"
-#~ "gont arveriad ho po krouet amaĂą, hag ereaĂą evel root evit kefridioĂš a\n"
-#~ "vererezh ha trezerc'hel hepken."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Setu dibaboÚ pennaù LILO ha grub :\n"
-#~ " - Trobarzhell loc'haù : a dermen anv an drobarzhell (da sk. parzhadur\n"
-#~ "ur bladenn galet) a zo enni ar rann loc'haĂą. Nemet ma ouifec'h a-zevri\n"
-#~ "ez eo disheĂąvel, dibabit \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Gedvezh a-raok loc'haù ar skeudenn dre ziouer : a spisa an niver a\n"
-#~ "zekvet eilennoĂš a rankfe gortoz ar c'harger loc'haĂą kent loc'haĂą ar "
-#~ "skeudenn\n"
-#~ "gentaĂą. Talvoudus eo war reizhiadoĂš a loc'h diouzhtu adalek ar bladenn "
-#~ "galet\n"
-#~ "goude bezaĂą enaouet ar stokellaoueg. Ne gortoz ket ar c'harger loc'haĂą "
-#~ "m'eo\n"
-#~ "disoĂąjet \"gedvezh\" pe dermenet da mann.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Mod video : a spisa ar mod skrid VGA a rankfe bezaù diuzet pa "
-#~ "loc'her.\n"
-#~ "An talvoudoÚ a heul a zo hegerz :\n"
-#~ " * boas : a ziuz ar mod skrid 80x25 boas.\n"
-#~ " * <niver> : a implij ar mod skrid a zegouezh."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "BremaĂą eo poent kefluniaĂą ar reizhiad X Window, a zo kraonienn\n"
-#~ "EGA (Etrefas Grafikel Arveriad) Linux. Evit ar c'hefridi-se, ret eo\n"
-#~ "deoc'h kefluniaĂą ho kartenn grafek hag ho skramm. Emgefreek eo ar bras\n"
-#~ "eus al lankadoĂš-se, evelato, neuze gwiriaĂą pezh a zo bet graet hag\n"
-#~ "asantiĂą d'ar c'hefluniadur a zlefe bezaĂą ho labour :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Pa 'z eo graet ar c'hefluniaĂą, laĂąset e vo X (nemet ma c'houlennit\n"
-#~ "digant DrakX chom hep hen ober) e seurt ma c'hellit gwiriaĂą ha\n"
-#~ "sellet ha plijet oc'h gant an dibarzhoĂš. Ma n'oc'h ket, e c'hellit\n"
-#~ "mont war gil hag o c'hemmaĂą, ken lies gwech ha ma karot."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "M'eo siek un dra bennak en ho kefluniadur X, implijit an dibarzhoĂš-se\n"
-#~ "a-benn kefluniaĂą reizh ar reizhiad X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Ma kavit gwelloc'h implijout un ereadur grafikel, diuzit \"Ya\". Mod "
-#~ "all,\n"
-#~ "diuzit \"Ket\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "EmaĂą ho reizhiad war-nes adloc'haĂą.\n"
-#~ "\n"
-#~ "Goude adloc'haĂą, kargaĂą a raio ho reizhiad Mandrake Linux nevez ent "
-#~ "emgefreek.\n"
-#~ "Ma vennit loc'haĂą ur reizhiad korvoiĂą all, lennit ar gourc'hemennoĂš "
-#~ "ouzhpenn\n"
-#~ "mar plij."
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "SkrivaĂą /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "FurmadiĂą an holl"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Goude furmadiĂą an holl barzhadurioĂš,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "kollet e vo holl roadoĂš war ar parzhadurioĂš-se"
-
-#~ msgid "Reload"
-#~ msgstr "AdkargaĂą"
-
-#~ msgid "Remote queue"
-#~ msgstr "Steud a-bell"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Ya, moullit ur bajenn arnod ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Ya, moullit ur bajenn arnod PostScript"
-
-#~ msgid "Paper Size"
-#~ msgstr "Ment ar paper"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Stlepel ar bajenn goude moullaĂą ?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "DibarzhoĂš ar sturier Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "DibarzhoĂš donder liv"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "MoullaĂą skrid evel PostScript ?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Kempenn an efed-diri ?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Niver a bajennoĂš dre bajenn ziskas"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "MarzoĂš DehoĂš/Kleiz e poentoĂš (1/72 ur meudad)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "MarzoĂš Krec'h/TraoĂą e poentoĂš (1/72 ur meudad)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "DibarzhoĂš GhostScript ouzhpenn"
-
-#~ msgid "Extra Text options"
-#~ msgstr "DibarzhoĂš skrid ouzhpenn"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Pep steud moullaĂą (m'eo kaset an dleadoĂš moullaĂą davetaĂą) en deus\n"
-#~ "ezhomm un anv (lp alies) hag ur renkell spool kevret gantaĂą. Pe anv\n"
-#~ "ha renkell a zo da implijout evit ar steud-maĂą ha penaos eo luget ar "
-#~ "voullerrez ?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Anv ar steud"
-
-#~ msgid "Spool directory"
-#~ msgstr "Renkell ar spool"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Evit sevel ur reizhiad suroc'h, gwelloc'h deoc'h diuz \"Implijout ur "
-#~ "restr kuzhet\"\n"
-#~ "hag \"Implijout tremegerioĂš MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Ma implij ho rouedad NIS, diuzit \"Implijout NIS\". Ma ne ouzit ket, "
-#~ "goulennit\n"
-#~ "digant merour ho rouedad."
-
-#~ msgid "yellow pages"
-#~ msgstr "pajennoĂš melen"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "An urzhiaoueg loc'haĂą a glask kargaĂą molladoĂš evit ho logodenn usb."
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Sujedigezh emgefreek"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "KefluniaĂą LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "KrouiĂą ur bladennig loc'haĂą"
-
-#~ msgid "Choice"
-#~ msgstr "Dibab"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "A bep seurt"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "GoulennoĂš a bep seurt"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "N'hellan ket implijout supermount el live surentez uhel"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Servijer DNS kentaĂą"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Eil servijer DNS"
-
-#~ msgid "loopback"
-#~ msgstr "saveteiĂą"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Pe garger(ien) loc'haĂą a vennit imlijout ?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Pladennig staliaĂą emgefreek"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Klask kavout ur modem ?"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Configure timezone"
-#~ msgstr "KefluniaĂą an takad-eur"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(a c'hell breinaĂą roadoĂš)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "EnaouiĂą KrouilhNiv pa loc'her"
-
-#~ msgid "DNS server:"
-#~ msgstr "Servijer DNS :"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Trobarzhell an dreuzell :"
-
-#~ msgid "Customized"
-#~ msgstr "Neuziet"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Implijout ur restr kuzhet"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Implijout tremegerioĂš MD5"
-
-#~ msgid "Package"
-#~ msgstr "Pakad"
-
-#~ msgid "Tree"
-#~ msgstr "Gwezenn"
-
-#~ msgid "Sort by"
-#~ msgstr "RummaĂą dre"
-
-#~ msgid "Category"
-#~ msgstr "Rummad"
-
-#~ msgid "Installed packages"
-#~ msgstr "PakadoĂš staliet"
-
-#~ msgid "Available packages"
-#~ msgstr "PakadoĂš hegerz"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Diskouez an delioĂš hepken"
-
-#~ msgid "Expand all"
-#~ msgstr "Astenn pep tra"
-
-#~ msgid "Collapse all"
-#~ msgstr "PlegaĂą pep tra"
-
-#~ msgid "Add location of packages"
-#~ msgstr "OuzhpennaĂą lec'hiadur ar pakadoĂš"
-
-#~ msgid "Update location"
-#~ msgstr "Bremanaat al lec'hiadur"
-
-#~ msgid "Find Package"
-#~ msgstr "Kavout ur pakad"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Kavout ur pakad ennaĂą ur restr"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "GwintaĂą etre Staliet hag Hegerz"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "O wiriaĂą sujedigezhioĂš"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ar pakadoĂš a-heul a zo war-nes bezaĂą distaliet"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Pe bakad a glask"
-
-#~ msgid "No match"
-#~ msgstr "Klotadur ebet"
-
-#~ msgid "No more match"
-#~ msgstr "Klotadur ouzphenn ebet"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "EmaĂą rpmdrake er mod ``memor izel'' evit poent.\n"
-#~ "AdlaĂąsaĂą a rin rpmdrake tuchantik evit aotren da glask restroĂš"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Pe restr emaoc'h o klask ?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Petra emaoc'h o klask ?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Roit din un anv (da sk. `ouzhpenn', `kenwerzhel')"
-
-#~ msgid "Directory"
-#~ msgstr "Renkell"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Cdrom hegerz ebet (netra e /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL ar renkell enni ar RPMoĂš"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Evit FTP hag HTTP eo ret deoc'h reiĂą lec'hiadur an hdlist\n"
-#~ "Da geĂąver an URL a-us e rank bezaĂą"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Leugnit ar stlenn a-heul mar plij"
-
-#~ msgid "%s is already in use"
-#~ msgstr "War implij eo %s endeo"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "O vremanaat an diaz RPMoĂš"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "War-nes dilemel an enmont %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "O klask delioĂš"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Klask delioĂš a bad ur frapadig"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (a-bouez)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (brav-tre)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (brav)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Ouzh pe borzh a-steud eo luget ho logodenn ?"
-
-#~ msgid "Czech"
-#~ msgstr "Tchek"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovakek"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Pe seurt parzhadur a vennit ?"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Kement parzhadur a zo bet nevez termenet a zle bezaĂą furmadet a-benn\n"
-#~ "e implijout (furmadiĂą a dalvez krouiĂą ur reizhiad restroĂš). Er poent-se,\n"
-#~ "e c'hellit mennout adfurmadiĂą parzhadurioĂš 'zo o vezaĂą endeo evit "
-#~ "diverkaĂą\n"
-#~ "ar roadoÚ a zo enno. Ho evezh : n'eo ket ret adfurmadiù parzhadurioÚ o\n"
-#~ "vezaĂą endeo, dreist-holl ma 'z eus enno restroĂš pe roadoĂš a vennit "
-#~ "derc'hel.\n"
-#~ "SkouerioĂš dibar eo /home ha /usr."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "EmaĂą ar pakadoĂš diuzet o vezaĂą staliaet bremaĂą. Un nebeut munut\n"
-#~ "e zlefe padout an obererezh-se nemet m'ho pije dibabet bremanaat\n"
-#~ "ur reizhiad o vezaĂą, en degouezh-se e c'hell kemer muioc'h a amzer\n"
-#~ "zoken a-raok na grogfe ar bremanaat."
-
-#~ msgid "Forget the changes?"
-#~ msgstr "DisoĂąjal ar c'hemmoĂš"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Peseurt eo ho logodenn ?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "SpisterioĂš emgefreek"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "A-benn kavout ar spisterioĂš hegerz e klaskin meur a hini.\n"
-#~ "C'hwildaĂą a raio ho skramm...\n"
-#~ "Gallout a rit e tizenaouiĂą ma fell deoc'h, klevet a rit ur bip pa vo echu"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Klask kavout ar spisterioĂš hegerz a c'hellan (da sk. 800x600).\n"
-#~ "A-wechoĂš, evelato, e c'hell sac'haĂą an ardivink.\n"
-#~ "Mennout a rit klask ?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Mod reizh ebet kavet\n"
-#~ "Klaskit gant ur gartenn video pe ur skramm all"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Klask ent emgefreek ar spisterioĂš"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Logodenn Apple ADB"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Logodenn Apple ADB (2 nozelenn)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Logodenn Apple ADB (3 nozelenn pe vuioc'h)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Logodenn Apple ADB "
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Logodenn Apple USB (2 nozelenn)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Logodenn Apple USB (3 nozelenn pe vuioc'h)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Logodenn bus ATI"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Logodenn bus Microsoft"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logodenn bus Logitech"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Logodenn USB (3 nozelenn pe vuioc'h)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Stumm 2.1A pe uheloc'h (a-steud)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (a-steud)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (a-steud)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (a-steud)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Logodenn rummel (a-steud)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Kenglotus Microsoft (a-steud)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Logodenn rummel 3 nozelenn (a-steud)"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "marc'haĂą NFS sac'het"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Rinegouriezh"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Ha mennout a rit kefluniaĂą ur rouedad lec'hel evit ho reizhiad ?"
-
-#~ msgid "Show less"
-#~ msgstr "Diskouez nebeutoc'h"
-
-#~ msgid "Show more"
-#~ msgstr "Diskouez muioc'h"
-
-#~ msgid "tie"
-#~ msgstr "frondenn"
-
-#~ msgid "brunette"
-#~ msgstr "duardez"
-
-#~ msgid "girl"
-#~ msgstr "plac'h"
-
-#~ msgid "woman-blond"
-#~ msgstr "meleganez"
-
-#~ msgid "automagic"
-#~ msgstr "emhud"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Petra eo reizhadur ho stokellaoueg ?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Klask kavout kartennoĂš PCMCIA ?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Klask kavout trobarzhelloĂš %s ?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "Ha mennout a rit kefluniaĂą ur gevreadenn gervel dre modem evit ho "
-#~ "reizhiad ?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Klask kavout trobarzhelloĂš PCI ?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "O klask ar parzhadur gwrizienn."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s : N'eo ket ur parzhadur gwrizienn, diuzit un all mar plij."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr ""
-#~ "Dibabit ur parzhadur d'ober anezhaĂą ho parzhadur gwrizienn, mar plij."
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "N'hoc'h eus ket a-walc'h a egor evit Lnx4win !"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U Mo"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# '¤' is the 'ù' (ntilde) in cp437 encoding.
-# '\227' is the 'Ăš' (ugrave) in cp437 encoding.
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Degemer mat e LILO, an dibaber reizhiad oberia¤ !\n"
-#~ "\n"
-#~ "Evit rolla¤ an dibabo— aotreet, stokit <TAB>.\n"
-#~ "\n"
-#~ "Evit karga¤ unan anezho, skrivit e anv ha stokit <ENKAS> pe c'hortozit %d "
-#~ "eilenn evit al loc'ha¤ dre ziouer.\n"
-#~ "\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Degemer mat e SILO, an dibaber reizhiad oberian~ !\n"
-#~ "\n"
-#~ "Evit rollan~ an dibabou aotreet, stokit <TAB>.\n"
-#~ "\n"
-#~ "Evit kargan~ unan anezho, skrivit e anv ha stokit <ENKAS> pe c'hortozit %"
-#~ "d eilenn evit al loc'han~ dre ziouer.\n"
-#~ "\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "DibarzhoĂš pennaĂą SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Setu da heul enmontoĂš a vez e SILO.\n"
-#~ "Gallout a rit ouzhpennaĂą lod pe gemmaĂą a re a zo."
-
-#~ msgid "This label is already in use"
-#~ msgstr "War implij eo ar skridennad-se endeo"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Staliadur SILO zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
-#~ "to use, it will insert it (them) automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX a glasko da gentaĂą kavout unan pe vuioc'h a azasaer SCSI PCI.\n"
-#~ "Ma gav anezhaĂą (pe anezho) ha ma oar pe sturier(ien) implijout, e (o)\n"
-#~ "enlakaat a raio ent emgefreek.\n"
-#~ "\n"
-#~ "\n"
-#~ "M'eo ho azasaer SCSI ur gartenn ISA, pe m'eo ur gartenn PCI hogen\n"
-#~ "ne oar ket DrakX pe sturier implijout evit ar gartenn-se, pe n'hoc'h eus\n"
-#~ "tamm azasaer SCSI ebet, goulennet e vo diganeoc'h neuze hag-eĂą hoc'h\n"
-#~ "eus unan pe get. Ma n'hoc'h eus hini, eilgeriit \"Ket\". M'hoc'h eus\n"
-#~ "unan pe vuioc'h, eilgeriit \"Ya\". Ur roll sturierien a zeuio neuze\n"
-#~ "war wel, a vo ret deoc'h diuz unan anezho.\n"
-#~ "\n"
-#~ "\n"
-#~ "Goude m'ho po diuzet ar sturier, DrakX a c'houlenno ma vennit spisaat\n"
-#~ "dibarzhoĂš evitaĂą. Da gentaĂą, klaskit leuskel ar sturier amprouiĂą\n"
-#~ "ar periant : peurliesaù e da mat en-dro.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ma ne ra ket, na zisoĂąjit ket an titouroĂš war ho periant a c'hellit\n"
-#~ "kavout en ho teuliadur pe digant Windows (m'hoc'h eus hemaĂą war ho\n"
-#~ "reizhiad), evel m'eo aliet gant ar sturlevr staliaĂą. An dibarzhoĂš a\n"
-#~ "vo ret deoc'h pourvezaĂą d'ar sturier eo a zo e kaoz."
-
-#~ msgid "Shutting down"
-#~ msgstr "O tizenaouiĂą"
-
-#~ msgid "useless"
-#~ msgstr "diezhomm"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Dibabit \"StaliaĂą\" ma n'eus ket a stumm kent Linux bet staliaet,\n"
-#~ "pe ma vennit implijout meur a stumm pe a zasparzhadenn.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dibabit \"Bremanaat\" ma vennit hizivaat ur stumm kent Mandrake Linux :\n"
-#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "pe 7.0 (Air)."
-
-#~ msgid "Creating and formatting loopback file %s"
-#~ msgstr "O krouiĂą hag o furmadiĂą ar restr saveteiĂą %s"
-
-#~ msgid "Amusements/Games"
-#~ msgstr "Dudi/C'hoarioĂš"
-
-#~ msgid "Applications/Archiving"
-#~ msgstr "ArloadoĂš/Diellerezh"
-
-#~ msgid "Applications/CPAN"
-#~ msgstr "ArloadoĂš/CPAN"
-
-#~ msgid "Applications/Configuration"
-#~ msgstr "ArloadoĂš/KefluniaĂą"
-
-#~ msgid "Applications/Engineering"
-#~ msgstr "ArloadoĂš/Kalvezerezh"
-
-#~ msgid "Applications/File"
-#~ msgstr "ArloadoĂš/Restr"
-
-#~ msgid "Applications/Finance"
-#~ msgstr "ArloadoĂš/Arc'hanterezh"
-
-#~ msgid "Applications/Internet"
-#~ msgstr "ArloadoĂš/Kenrouedad"
-
-#~ msgid "Applications/Multimedia"
-#~ msgstr "ArloadoĂš/Liesvedia"
-
-#~ msgid "Applications/Networking"
-#~ msgstr "ArloadoĂš/Rouedad"
-
-#~ msgid "Applications/Productivity"
-#~ msgstr "ArloadoĂš/Ampletusted"
-
-#~ msgid "Applications/Publishing/TeX"
-#~ msgstr "ArloadoĂš/Embann/TeX"
-
-#~ msgid "Applications/Text"
-#~ msgstr "ArloadoĂš/Skrid"
-
-#~ msgid "Development/Debuggers"
-#~ msgstr "Diorren/Dizraenerien"
-
-#~ msgid "Development/Languages"
-#~ msgstr "Diorren/AregoĂš"
-
-#~ msgid "Development/System"
-#~ msgstr "Diorren/Reizhiad"
-
-#~ msgid "Development/Tools"
-#~ msgstr "Diorren/BinvioĂš"
-
-#~ msgid "Extensions/Arabic"
-#~ msgstr "AstennoĂš/Arabeg"
-
-#~ msgid "Extensions/Chinese"
-#~ msgstr "AstennoĂš/Sineg"
-
-#~ msgid "Extensions/Japanese"
-#~ msgstr "AstennoĂš/Japaneg"
-
-#~ msgid "Libraries"
-#~ msgstr "Mezarc'hioĂš"
-
-#~ msgid "Networking/Utilities"
-#~ msgstr "Rouedad/MavegoĂš"
-
-#~ msgid "System Environment/Base"
-#~ msgstr "Endro reizhiad/Diazez"
-
-#~ msgid "System Environment/Daemons"
-#~ msgstr "Endro reizhiad/Diaouled"
-
-#~ msgid "User Interface/Desktops"
-#~ msgstr "Etrefas arveriad/Gorretaol"
-
-#~ msgid "User Interface/X Hardware Support"
-#~ msgstr "Etrefas arveriad/MeraĂą ardivinkaj X"
-
-#~ msgid "Utilities/Archiving"
-#~ msgstr "MavegoĂš/Diellerezh"
-
-#~ msgid "Utilities/System"
-#~ msgstr "MavegoĂš/Reizhiad"
-
-#~ msgid "X11/Amusements"
-#~ msgstr "X11/Dudi"
-
-#~ msgid "X11/Applications"
-#~ msgstr "X11/ArloadoĂš"
-
-#~ msgid "X11/Applications/Internet"
-#~ msgstr "X11/ArloadoĂš/Kenrouedad"
-
-#~ msgid "X11/Applications/Networking"
-#~ msgstr "X11/ArloadoĂš/Rouedad"
-
-#~ msgid "X11/Window Managers"
-#~ msgstr "X11/Merourien prenester"
-
-#~ msgid "Communications"
-#~ msgstr "KehentiĂą"
-
-#~ msgid "Development/C++"
-#~ msgstr "Diorren/C++"
-
-#~ msgid "Development/Databases"
-#~ msgstr "Diorren/StlennvonioĂš"
-
-#~ msgid "Development/Kernel"
-#~ msgstr "Diorren/KraoĂąell"
-
-#~ msgid "Editors"
-#~ msgstr "Aozerien"
-
-#~ msgid "Emulators"
-#~ msgstr "Kendarvanerezh"
-
-#~ msgid "Graphics"
-#~ msgstr "Grafek"
-
-#~ msgid "Publishing"
-#~ msgstr "Embann"
-
-#~ msgid "Shells"
-#~ msgstr "ShelloĂš"
-
-#~ msgid "Sound"
-#~ msgstr "Son"
-
-#~ msgid "System/Fonts/True type"
-#~ msgstr "Reizhiad/NodrezhoĂš/True Type"
-
-#~ msgid "System/Libraries"
-#~ msgstr "Reizhiad/Mezarc'hioĂš"
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
deleted file mode 100644
index c406f3c6f..000000000
--- a/perl-install/share/po/bs.po
+++ /dev/null
@@ -1,12336 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Vedran Ljubovic <vljubovic@smartnet.ba>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-28 20:49GMT\n"
-"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
-"Language-Team: Bosnian <prijevodi@lugbih.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "KonfiguriĹĄi sve glave odvojeno"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "KonfiguriĹĄi samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"VaĹĄ sistem podrĹžava konfiguraciju viĹĄe glava.\n"
-"Šta želite učiniti?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafička karta"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Izaberite grafičku kartu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Izaberite X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Izaberite X drajver"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X drajver"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree Ĺželite imati?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"VaĹĄa kartica moĹže imati podrĹĄku za 3D hardversko ubrzanje ali samo sa\n"
-"XFree %s. VaĹĄu karticu podrĹžava XFree %s koji moĹže imati bolju podrĹĄku za 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "VaĹĄa kartica moĹže imati podrĹĄku za 3D hardversko ubrzanje sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardverskim ubrzanjem"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"VaĹĄa kartica moĹže imati podrĹĄku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"VaĹĄa kartica moĹže imati podrĹĄku za 3D hardversko ubrzanje sa XFree %s,\n"
-"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR.\n"
-"VaĹĄu karticu podrĹžava XFree %s koji moĹže imati bolju podrĹĄku za 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation display driver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfiguracija"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Izaberite veličinu memorije vaše grafičke karte"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Izaberite opcije za server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritična parametra su brzina vertikalnog osvježenja, što je brzina\n"
-"kojom se cijeli ekran osvjeĹžava, i najvaĹžnije brzina horizontalne\n"
-"sinhronizacije, ĹĄto je brzina kojm se prikazuju skan-linije.\n"
-"\n"
-"VEOMA JE VAŽNO da ne navedete tip monitora čiji je sinhronizacioni\n"
-"raspon izvan mogućnosti vašeg monitora: time možete oštetiti monitor.\n"
-" Ako niste sigurni, izaberite najmanju opciju."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Brzina horizontalnog osvjeĹžavanja"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Brzina vertiaklnog osvjeĹžavanja"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor nije konfigurisan"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafička karta još uvijek nije konfigurisana"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Rezolucije joĹĄ nisu odabrane"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Želite li testirati konfiguraciju?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje ove grafičke karte može zalediti računar"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probajte izmjeniti neke parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "DoĹĄlo je do greĹĄke"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "NapuĹĄtam za %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravna vrijednost?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "DoĹĄlo je do greĹĄke, probajte izmjeniti neke parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i dubinu boja"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafička karta: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "JoĹĄ"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "PrikaĹži sve"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tastature: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tip miĹĄa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Uređaj miša: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafička karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikacija grafičke karte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafička memorija: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dubina boja: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 drajver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pripremam X-Window konfiguraciju"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Šta želite učiniti?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Izmjena Monitora"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Izmjena Grafičke kartice"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Izmjena Server opcija"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Izmjena Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "PrikaĹži informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Testiraj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Izlaz"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"ZadrĹžati izmjene?\n"
-"Trenutna konfiguracija je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X u startanju"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mogu podesiti vaš računar da automatski pokrene X nakon boota.\n"
-"Želite li da se X pokrene kada bootate?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molimo ponovo se prijavite na %s radi aktiviranja izmjena"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molimo izvrĹĄite logout i zatim koristitite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljada boja (15 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ili viĹĄe"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardna VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Kompatibilna, 1024x768 na 87 Hz sa preplitanjem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz sa preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency koja može postići 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji može postići 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji može postići 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor diska (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje Ĺželite smjestiti bootloader?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafičkim menijem"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Bootanje iz DOS/Windowsa (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne opcije bootloadera"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader koji ćete koristiti"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader instalacija"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot uređaj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOSima)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Čekanje prije bootanja default preslike"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Ĺ ifra"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Ĺ ifra (ponovo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ograniči opcije komandne linije"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ograniči"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Čisti /tmp prilikom svakog boota"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veličina RAMa ako je potrebno (pronađeno %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omogući više profila"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Navedite veličinu rama u MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcija ``Ograniči opcije komandne linije'' je beskorisna bez šifre"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Molimo pokuĹĄajte ponovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Ĺ ifre se ne poklapaju"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init Poruka"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Otvori čekanje firmware-a"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Omogući boot sa CDa?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Omogući boot sa OFa?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Navedene su razne stavke.\n"
-"Možete dodati nove ili promjeniti postojeće."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gotovo"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Izmjeni"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu stavke Ĺželite dodati?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OSi (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OSi (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Ostali OSi (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Preslika"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Čitaj-piši"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabela"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Labela"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-veličina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ukloni stavku"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna labela nije dozvoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Morate navesti image kernela"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Morate navesti root particiju"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ova labela je već u upotrebi"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Pronađeno %s %s interfejsa"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Imate li neki drugi?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li ijedan %s interfejs?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Pogledaj hardware info"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver ću pokušati?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slučajevima, %s drajver treba imati dodatne informacije za\n"
-"ispravan rad, iako on obično radi dobro i bez njih. Želite li navesti neke\n"
-"ekstra opcije za njega ili dozvoliti drajveru da ispita vaš računar za sve\n"
-"informacije koje mu trebaju? Povremeno, ispitivanje može zaglaviti računar,\n"
-"ali ne bi trebalo izazvati nikakvu ĹĄtetu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Ispitivanje"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Navedi opcije"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sada moĹžete navesti opcije za modul %s.\n"
-"Obratite paĹžnju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada moĹžete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost "
-"ime2=vrijednost2 ...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcije modula"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Učitavanje modula %s nije uspjelo.\n"
-"Želite li probati opet sa drugim parametrima?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pristup X programima"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pristup administrativnim datotekama"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(već dodan %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ova ĹĄifra je previĹĄe jednostavna"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Molimo navedite korisničko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisničko ime smije sadržati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ovo korisničko ime je već dodano"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesite korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Korisničko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mogu podesiti vaš računar da automatski prijavi jednog korisnika.\n"
-"Želite li koristiti ovu mogućnost?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izaberite default korisnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window manager koji će se pokretati:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Molimo izaberite jezik koji ćete koristiti."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Možete izabrati i druge jezike koji će biti dostupni nakon instalacije"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Svi"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Ručno izaberi"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Bez dijeljenja"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba biti instaliran. Da li ga Ĺželite instalirati?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Možete eksportovati koristeći NFS ili Sambu. Koji želite"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nedostaje obavezan paket %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Odustani"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Dijeljenje po-korisniku koristi grupu \"fileshare\". \n"
-"Možete dodavati korisnike u ovu grupu pomoću userdrake-a."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "DobrodoĹĄli u Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "LoĹĄ"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Visok"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "ViĹĄi"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoičan"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ovaj nivo treba koristiti pažljivo. On čini vaš sistem lakšim za upotrebu,\n"
-"ali vrlo osjetljivim: ne smije biti korišten za računar koji je spojen na\n"
-"druge ili na Internet. Nema pristupa ĹĄifrom."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Šifra je sada aktivirana, ali korištenje za mrežni računar još nije "
-"preporučeno."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ovo je standardna sigurnost koja je preporučena za računar koji će biti "
-"koriĹĄten za spajanje na Internet kao klijent."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Već postoje određena ograničenja, a više automatskih provjera se pokreće "
-"svaku noć."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao "
-"server.\n"
-"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji "
-"prima\n"
-"konekcije sa mnogo klijenata. Napomena: ako je vaš računar samo klijent na "
-"Internetu, moĹžda je bolje da izaberete niĹži nivo."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.\n"
-"Sigurnosne osobine na maksimumu."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izaberite nivo sigurnosti"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Nivo sigurnosti"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za servere"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobro doĹĄli u %s izbornik operativnog sistema!\n"
-"\n"
-"Izaberite operativni sistem na listi gore ili\n"
-"sačekajte %d sekundi do default boota.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro doĹĄli u GRUB izbornik operativnog sistema!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Koristite tipke %c i %c za izbor jedne od stavki."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite enter za bootanje izabranog OSa, 'e' za editovanje"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandi prije bootanja, ili 'c' za komandnu liniju."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljene stavke će biti bootane automatski za %d sekundi."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nema dovoljno prostora u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne moĹžete instalirati bootloader na %s particiju\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pomoć još nije implementirana.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila boota"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>I"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Aurora-u prilikom boota"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao boot manager.\n"
-"Kliknite na Konfiguriši kako bi se pokrenuo čarobnjak za podešavanje."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "KonfiguriĹĄi"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistem mod"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sistem na startu"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ne Ĺželim da se autologiram"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, Ĺželim da se autologiram sa ovim (korisnik, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za čitanje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu napraviti screenshot prije particioniranja"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshotovi će biti dostupni nakon što instalirate u %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francuska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kostarika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgija"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Češka"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Njemačka"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grčka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "NorveĹĄka"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Ĺ vedska"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nizozemska"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italija"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "SAD"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Molimo najprije napravite backup vaĹĄih podataka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Pročitajte pažljivo!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ako planirate koristiti aboot, budite paĹžljivi i ostavite slobodnog prostora "
-"(2048 sektora je dovoljno)\n"
-"na početku diska"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "GreĹĄka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Čarobnjak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izaberi akciju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Imate jednu veliku FAT particiju\n"
-"(koju najvjerovatnije koristi MicroSoft Dos/Windows).\n"
-"Predlažem da najprije promjenite veličinu te particije\n"
-"(kliknite na nju, zatim na \"Promjeni veličinu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Molimo kliknite na particiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ostalo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipovi file sistema:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Kreiraj"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tip"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Koristite ``%s'' umjesto toga"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "ObriĹĄi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Najprije koristite ``Demontiraj''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene tipa particije %s, svi podaci na ovoj particiji će biti "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izaberi particiju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izaberi drugu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Prebaci u ekspertni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "PoniĹĄti"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Svejedno nastavljate?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Izlaz bez spaĹĄavanja"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Izlazite bez pisanja tabele particija?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Želite li spasiti izmjene /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto alokacija"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "ObriĹĄi sve"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informacije o hard disku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su u upotrebi"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati viĹĄe particija"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Da biste imali joĹĄ particija, molimo pobriĹĄite jednu kako bi se mogla "
-"kreirati extended particija"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Snimi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Vrati tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ponovo učitaj tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje izmjenjivog medija"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Izaberite datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup tabela particija nema istu veličinu\n"
-"Ipak nastavljate?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Ubacite disketu u jedinicu\n"
-"Svi podaci na toj disketi će biti izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "PokuĹĄavam da spasim tabelu particija"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Tačka montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Promjeni veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "PremjeĹĄtanje"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAIDa"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVMa"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificiraj RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Napravi novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Početni sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Veličina u MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tip datotečnog sistema: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Tačka montiranja: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preference: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Izmjena tipa particije"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Koji datotečni sistem želite?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Prebacujem sa ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdje Ĺželite montirati loopback datoteku %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje želite montirati uređaj %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu izmjeniti tačku montiranja jer se ova particija koristi za "
-"loopback.\n"
-"Najprije uklonite loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Izračunavam granice FAT filesistema"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mijenjam veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ovoj particiji ne možete mijenjati veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Svi podaci na toj particiji bi trebali biti backupovani"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene veličine particije %s, svi podaci na njoj će biti izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Izaberite novu veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nova veličina u MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk je Ĺželite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji sektor je Ĺželite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "PremjeĹĄtam"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "PremjeĹĄtam particiju..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeći RAID na koji ćete dodati"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeći LVM na koji ćete dodati"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Naziv LVMa?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne moĹže koristiti za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Naziv loopback datoteke: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dajte naziv datoteke"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Datoteku već koristi drugi loopback, izaberite drugo ime"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka već postoji. Želite li je koristiti?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Razni"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "uređaj"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivo"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "veličina chunka"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Žalim, ali ipak neću prihvatiti kreiranje /boot particije ovdje (na cilindru "
-">1024).\n"
-"Ili ćete koristiti LILO i stvar neće raditi, ili nećete koristiti LILO pa "
-"vam ne treba ni /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particija koju ste izabrali da dodate kao root (/) je fizički locirana "
-"iznad\n"
-"1024og cilindra hard diska, tako da nemate /boot particiju.\n"
-"Ako planirate koristiti LILO boot manager, pazite da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
-"Pazite da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za uređaj %s će biti zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Biće potrebno da rebootate prije nego što izmjene mogu stupiti na snagu"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon formatiranja particije %s, svi podaci na toj particiji će biti "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiram"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sakrij datoteke"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Prebaci datoteke na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktorij %s već sadrži neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "PremjeĹĄtam datoteke na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je od sada poznata kao %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Uređaj: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS slovo uređaja: %s (pretpostavka)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tip: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Početak: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Veličina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatirana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nije formatirana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montirana\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Particija koja se boota po defaultu\n"
-" (za MS-DOS boot, ne za lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Veličina chunka %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Naziv loopback datoteke: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Postoji mogućnost da je ova\n"
-"particija Driver particija, vjerovatno\n"
-"biste je trebali ostaviti na miru.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova posebna Bootstrap\n"
-"particija je za\n"
-"dvojni boot vaĹĄeg sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veličina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na busu %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Ključ za kodiranje datotečnog sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite vaš ključ za kodiranje datotečnog sistema"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova ĹĄifra je previĹĄe jednostavna (mora biti duga najmanje %d karaktera)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Ĺ ifre se ne poklapaju"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Ĺ ifra"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Ĺ ifra (joĹĄ jednom)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Promjeni tip"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Molimo kliknite na medij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "TraĹži servere"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ne znam kako formatirati %s tipa %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktoriju %s nije uspjelo"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck nije uspio, izlazni kod %d ili signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "greĹĄka u demontiranju %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "sa /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ne moĹžete koristiti JFS za particije manje od 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne moĹžete koristiti ReiserFS za particije manje od 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Tačke montiranja moraju počinjati sa /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Već postoji particija sa tačkom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne možete koristiti LVM logički volumen za tačku montiranja %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Potreban vam je pravi file sistem (ext2, reiserfs) za ovu tačku montiranja\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ne možete koristiti kriptovani datotečni sistem za tačku montiranja %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno prostora za auto-alokaciju"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nemam ĹĄta da radim"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "GreĹĄka u otvaranju %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Došlo je do greške - nije pronađen nijedan ispravan uređaj na kojem se mogu "
-"kreirati novi file sistemi. Molimo provjerite vaš hardware i pronađite uzrok "
-"greĹĄke"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemate nijednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalacija se prostire na nekoliko CDova. DrakX zna da li "
-"je\n"
-"neki paket smješten na drugom CDu i on će izbaciti trenutni CD i zamoliti "
-"vas\n"
-"da ubacite neki drugi po potrebi."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if the machine is to be used for programming, choose "
-"the\n"
-"desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\" Installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wishto connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sada moĹžete izabrati koje servise Ĺželite pokretati prilikom boota.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
-"instalaciji. Pregledajte ih pažljivo i isključite sve one koji nisu "
-"potrebni\n"
-"prilikom boota.\n"
-"\n"
-"Kada izaberete servis dobićete kratki tekst koji objašnjava taj servis\n"
-"Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne\n"
-"mijenjate predloĹženi izbor.\n"
-"\n"
-"!! Budite vrlo paĹžljivi sa ovim korakom ako namjeravate koristiti vaĹĄ "
-"računar\n"
-"kao server: vjerovatno ne Ĺželite da pokrenete neke servise koji vam ne\n"
-"trebaju. Molimo vas da zapamtite da pojedini servisi mogu biti opasni\n"
-"ako su aktivni na serveru. Općenito, izaberite samo one servise koji vam\n"
-"stvarno trebaju. !!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working internet connection for this feature to function. It\n"
-"will actually install on your machine a time server that can be optionally\n"
-"used by other machines on your local network."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the boot loader, DrakX will rewrite the boot sector "
-"(MBR)\n"
-"of your main disk (unless you are using another boot manager) so that you\n"
-"can start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Na ovom mjestu trebate izabrati gdje Ĺželite instalirati Linux Mandrake\n"
-"operativni sistem na vašem hard disku. Ako je disk prazan ili ako postojeći\n"
-"operativni sistem koristi sav prostor na njemu, potrebno je da ga\n"
-"particionirate. U biti, particioniranje hard diska predstavlja logičko\n"
-"organiziranje kako bi se stvorio prostor za instaliranje vaĹĄeg novog\n"
-"Mandrake Linux sistema.\n"
-"\n"
-"Pošto su efekti particioniranja obično nepovratni, particioniranje može\n"
-"biti zastrašujuće i stresno ako ste neiskusan korisnik. Srećom, postoji\n"
-"čarobnjak koji pojednostavljuje taj proces. Prije započinjanja, molimo\n"
-"konsultirajte priručnik i nemojte žuriti.\n"
-"\n"
-"Ako instalirate koristeći Ekspertni mod, ući ćete u DiskDrake, Mandrake\n"
-"Linux alat za particioniranje, koji vam omogućava da fino podesite vaše\n"
-"particije. Pogledajte priručnik, poglavlje o DiskDrake-u. Na instalacionom\n"
-"sučelju možete koristiti čarobnjake kao što je opisano tamo, klikajući na\n"
-"dugme Čarobnjak.\n"
-"\n"
-"Ako su particije već definirane (tokom neke ranije instalacije ili pomoću\n"
-"nekog drugog alata za particioniranje), sve ĹĄto trebate jeste da ih "
-"izaberete\n"
-"za instalaciju vaĹĄeg Linux sistema.\n"
-"\n"
-"Ako particije nisu već definirane, trebate ih kreirati koristeći čarobnjak.\n"
-"Ovisno o konfiguraciji vaĹĄeg hard diska, moĹže biti dostupno nekoliko\n"
-"mogućnosti:\n"
-"\n"
-" * Koristi slobodan prostor: jednostavno vodi na automatsko particioniranje\n"
-"vašeg praznog diska (diskova). Neće biti postavljana nikakva daljnja "
-"pitanja.\n"
-"\n"
-" * Koristi postojeću particiju: čarobnjak je detektovao jednu ili više "
-"postojećih\n"
-"Linux particija na vaĹĄem hard disku. Ako ih Ĺželite zadrĹžati, izaberite ovu\n"
-"opciju.\n"
-"\n"
-" * Koristi slobodan prostor na Windows particiji: ako je na vaĹĄem hard\n"
-"disku instaliran Microsoft Windows koji je zauzeo sav slobodan prostor,\n"
-"moraćete napraviti nešto slobodnog prostora za Linux. To možete učiniti\n"
-"brišući vašu Microsoft Windows particiju zajedno sa podacima (vidi opcije\n"
-"\"Pobriši čitav disk\" ili \"Ekspertni mod\") ili možete promjeniti veličinu "
-"vaĹĄe\n"
-"Microsoft Windows particije. Promjena veličine se može izvršiti bez gubitka\n"
-"podataka. Ova mogućnost je preporučena ako namjeravate koristiti i Linux\n"
-"Mandrake i Microsoft Windows na istom računaru.\n"
-"\n"
-" Prije izbora ove opcije, molimo da imate na umu da će veličina vaše\n"
-"Microsoft Windows particije biti manja nego trenutno. To znači da će "
-"Microsoft\n"
-"Windows prijavljivati da imate manje prostora za smjeĹĄtaj podataka ili "
-"instaliranje\n"
-"novog softwarea.\n"
-"\n"
-" * Pobriši čitav disk: ako želite da obrišete sve podatke i sve particije\n"
-"koje su prisutne na vaĹĄem hard disku i umjesto njih postavite vaĹĄ novi "
-"Linux\n"
-"Mandrake sistem, moĹžete izabrati ovu opciju. Budite oprezni sa ovom\n"
-"mogućnošću, jer nećete moći poništiti vaš izbor nakon potvrde.\n"
-"\n"
-" !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * Ukloni Windows: ovo će jednostavno pobrisati sve na disku i početi od\n"
-"početka, particionirajući ga. Svi podatci na vašem disku će biti "
-"izgubljeni.\n"
-"\n"
-" !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * Ekspertni mod: ako želite da ručno particionirate vaš hard disk, "
-"izaberite ovu\n"
-"opciju. Budite oprezni - to je moćan, ali i opasan izbor. Vrlo lako možete\n"
-"izgubiti sve vaĹĄe podatke. Zato nemojte birati ovu opciju sem ako ste "
-"sigurni\n"
-"ĹĄta radite."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated install as the partitioning\n"
-"step (and only this one) remains interactive.\n"
-"\n"
-" * \"Automated\". Fully automated install: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section at our web site.\n"
-"\n"
-" * \"Save packages selection\"(*): saves the packages selection as made\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the driver and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Sve particije koje su upravo definisane moraju biti formatirane kako bi se\n"
-"mogle koristiti (formatiranje znači kreiranje datotečnog sistema). \n"
-"\n"
-"U ovom trenutku možda ćete poželjeti da reformatirate neke već postojeće\n"
-"particije kako biste pobrisali podatke koje sadrže. Ako želite to učiniti, "
-"molim\n"
-"takođe izaberite te particije koje želite da formatirate.\n"
-"\n"
-"Molim obratite pažnju da nije neophodno formatirati sve postojeće "
-"particije.\n"
-"Morate reformatirati particije koje sadrĹže operativni sistem (kao ĹĄto su\n"
-"\"/\", \"/usr\" ili \"var\") ali ne morate reformatirati particije koje "
-"sadrĹže\n"
-"podatke koje želite zadržati (tipično /home).\n"
-"\n"
-"Molimo da paĹžljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
-"odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih\n"
-"povratite.\n"
-"\n"
-"Kliknite na OK kada budete spremni za formatiranje particija.\n"
-"\n"
-"Kliknite na Odustani ako Ĺželite da izaberete druge particije za instalaciju\n"
-"vaĹĄeg novog Linux-Mandrake operativnog sistema.\n"
-"\n"
-"Kliknite na Napredno da izaberete particije koje Ĺželite provjeriti radi\n"
-"loĹĄih blokova."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"VaĹĄ novi Linux-Mandrake operativni sistem se trenutno intalira. Ovisno o\n"
-"broju paketa koje želite instalirati i brzini vašeg računara, ova operacija\n"
-"bi mogla trajati nekoliko minuta ali i značajno duže.\n"
-"\n"
-"Molim da imate strpljenja."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bug-fixes may\n"
-"have been fixed, and security issues solved. To allow you to benefit from\n"
-"this updates you are now proposed to download them from the internet.\n"
-"Choose \"Yes\" if you have a working internet connection, or \"No\" if you\n"
-"prefer to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearer to you. Then a packages selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package or \"Cancel\" to abort."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Prije nego što nastavimo, trebate pažljivo pročitati uvjete licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju, pa ako se ne slaĹžete sa svim\n"
-"uvjetima u njoj, kliknite na dugme Odbij, što će automatski završiti "
-"instalaciju.\n"
-"Da biste nastavili sa instalacijom, kliknite na dugme Prihvati."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"At this point, you need to choose what partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have been already\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on \"hda\" for the first IDE drive,\n"
-"\"hdb\" for the second, \"sda\" for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive.\n"
-"\n"
-" * \"Auto allocate\": this option allows you to automatically create Ext2\n"
-"and swap partitions in free space of your hard drive.\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and load your "
-"initial\n"
-"partitions table.\n"
-"\n"
-" * \"removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(Type, options, format) and gives more information.\n"
-"\n"
-" * \"Done\": when you have finished partitioning your hard drive, this will\n"
-"save your changes back to disc.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the chapter ext2fs from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"\"bootstrap\" partition of at least 1MB which will be used by the yaboot\n"
-"boot loader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"More than one Microsoft Windows partition has been detected on your hard\n"
-"drive. Please choose the one you want to resize in order to install your\n"
-"new Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Molimo da imate strpljenja. Ova operacija moĹže potrajati nekoliko minuta."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX sada mora znati da li Ĺželite obaviti podrazumjevanu instalaciju\n"
-"(\"Preporučeno\") ili želite da imate veću kontrolu (\"Ekspert\"). Takođe\n"
-"imate izbor između instalacije novog ili unaprijeđenja postojećeg\n"
-"Mandrake Linux sistema. \n"
-"\n"
-" * \"Instaliraj\" Potpuno briĹĄe raniji sistem. U stvari, ovisno o tome\n"
-"šta trenutno sadrži vaš računar, možda ćete moći zadržati neke stare\n"
-"particije (Linux i druge) bez ikakvih izmjena.\n"
-"\n"
-" * \"Unaprijedi\" Ova klasa instalacije vam omogućuje da jednostavno\n"
-"unaprijedite pakete trenutno instalirane na vaĹĄem Mandrake Linux sistemu.\n"
-"Ona zadrĹžava trenutne particije vaĹĄih hard diskova kao i postavke "
-"korisnika.\n"
-"Svi drugi koraci instalacije ostaju dostupni kao i u običnoj instalaciji.\n"
-"\n"
-" * \"Unaprijedi samo pakete\" Ova potpuno nova klasa vam omogućuje da\n"
-"unaprijedite postojeći Mandrake Linux sistem pri čemu ćete sačuvati svu\n"
-"sistemsku konfiguraciju bez izmjena. Dodavanje novih paketa trenutnoj\n"
-"instalaciji je također moguće.\n"
-"\n"
-"Unaprijeđenja bi trebala raditi fino za Mandrake Linux sisteme počevši\n"
-"od verzije \"8.1\".\n"
-"\n"
-"Ovisno o vašem poznavnaju GNU/Linuxa, molim izaberite jedan od sljedećih\n"
-"načina za instalaciju ili update vašeg Mandrake Linux operativnog sistema:\n"
-"\n"
-" * Preporučeno: ako nikada niste instalirali GNU/Linux operativni sistem,\n"
-"izaberite ovo. Instalacija će biti veoma jednostavna i biće vam postavljeno\n"
-"svega par pitanja.\n"
-"\n"
-" * Ekspert: ako imate dobro znanje GNU/Linuxa, moĹžete odabrati ovu klasu\n"
-"instalacije. Ekspertna instalacija vam omogućuje da obavite visoko "
-"prilagođenu\n"
-"instalaciju. Odgovor na neka pitanja moĹže biti vrlo teĹžak ako nemate dobro\n"
-"poznavanje GNU/Linuxa, zato nemojte birati ovo sem ako znate ĹĄta radite."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you will not even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the grey star corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales click the \"OK\" button to continue."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"By default, DrakX assumes you have a two-button mouse and will set it up\n"
-"for third-button emulation. DrakX will automatically know whether it is a\n"
-"PS/2, serial or USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default you will be presented with a\n"
-"mouse test screen. Use the buttons and wheel to verify that the settings\n"
-"are good. If the mouse is not working correctly press the space bar or\n"
-"[Return] to \"Cancel\" and choose again."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molimo izaberite ispravan port. Na primjer, \"COM1\" port pod MS\n"
-"Windowsom se zove \"ttyS0\" pod GNU/Linuxom."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if onlynfor "
-"one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO and grub are boot loaders for GNU/Linux. This stage, normally, is\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Boot loader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the boot loader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\").\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose - in the boot loader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a boot loader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general boot-loader parameters, you are\n"
-"presented the list of boot options that will be available at boot time.\n"
-"\n"
-"If there is another operating system installed on your machine, it will be\n"
-"automatically added to the boot menu. Here, you can choose to fine-tune the\n"
-"existing options. Select an entry and click \"Modify\" to modify or remove\n"
-"it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Morate navesti gdje Ĺželite smjestiti informacije koje su potrebne za\n"
-"bootanje GNU/Linuxa.\n"
-"\n"
-"Izaberite \"Prvi sektor na disku (MBR)\" sem ako znate tačno šta radite."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control "
-"Centernand clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX sada pronalazi sve IDE uređaje prisutne na vašem računaru. Također\n"
-"će pretražiti sistem za jednu ili više PCI SCSI kartica. Ako SCSI kartica "
-"bude\n"
-"pronađena, DrakX će automatski instalirati odgovarajući drajver.\n"
-"\n"
-"Budući da pronalaženje hardware-a ponekad ne uspjeva pronaći neki dio\n"
-"hardware-a, DrakX će pitati za potvrdu da li imate SCSI karticu ili ne.\n"
-"Kliknite Da ako znate da postoji SCSI kartica instalirana na vaĹĄem "
-"računaru.\n"
-"Biće vam predstavljena lista SCSI kartica koje možete izabrati. Kliknite Ne\n"
-"ako nemate nikakav SCSI hardware. Ako niste sigurni, moĹžete pregledati "
-"listu\n"
-"hardware u vašem računaru tako što ćete izabrati \"Vidi hardware info\" i "
-"kliknuti\n"
-"na OK. PretraĹžite listu hardware-a i zatim kliknite na dugme OK kako bi se\n"
-"vratili na pitanje o SCSI-ju.\n"
-"\n"
-"Ako morate ručno odabrati adapter, DrakX će vas pitati da li želite navesti\n"
-"neke opcije za njega. Trebate dopustiti DrakXu da ispita hardware za\n"
-"neke opcije specifične za tu karticu. Ovo obično radi dobro.\n"
-"\n"
-"Ako DrakX ne može ispitati opcije koje trebaju biti proslijeđene, moraćete\n"
-"ručno navesti opcije za drajver. Molimo pogledajte Priručnik za korištenje\n"
-"/User Guide/ (poglavlje 3, sekcija \"Prikupljanje informacija o vaĹĄem "
-"hardveru\")\n"
-"za napomene o pribavljanju ovih informacija iz hardverske dokumentacije,\n"
-"sa web stranice proizvođača (ako imate internet pristup) ili iz Microsoft\n"
-"Windowsa (ako ga imate na vaĹĄem sistemu)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the root partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or \"/\" for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a boot loader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful as\n"
-"to choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-" * Boot Device: indicate where you want to place the information required "
-"to\n"
-"boot to GNU/Linux. Generally, you setup a bootstrap partition earlier to\n"
-"hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux.\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected.\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose \"C\" for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose \"N\" for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may - or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary.\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in.\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated to it."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk koji Ĺželite obrisati kako biste instalirali vaĹĄu novu "
-"Mandrake\n"
-"Linux particiju. Budite pažljivi, svi podaci koji se nalaze na njemu će "
-"biti\n"
-"izgubljeni i neće se moći vratiti!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate također formatirati i %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Izabrali ste sljedeći server (servere): %s\n"
-"\n"
-"\n"
-"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
-"sigurnosnih\n"
-"problema, ali možda će biti pronađeni neki novi. U tom slučaju, morate ih\n"
-"unaprijediti što prije bude moguće.\n"
-"\n"
-"\n"
-"Da li zaista Ĺželite instalirati ove servere?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Ubacite FAT formatiranu disketu u jedinicu %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT (DOS/Windows) formatirana"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Da koristite ovaj izbor spaĹĄenih paketa, bootajte instalaciju sa ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Greška u čitanju datoteke %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki dio hardware-a na vašem računaru zahtjeva ``posjedovane'' drajvere za "
-"rad.\n"
-"Možete naći više podataka o njima na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Za ovo, kreirajte particiju (ili kliknite na neku od postojećih).\n"
-"Zatim izaberite ``Tačka montiranja'' i postavite ga na `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nemate nijednu swap particiju\n"
-"\n"
-"Svejedno nastavi?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Koristi postojeću particiju"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nema nijedne postojeće particije za upotrebu"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju Ĺželite koristiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Izaberite veličine"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Veličina root particije u MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Veličina swap particije u MB:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Koristi slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji želite promjeniti veličinu?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Izračunavam granice Windows datotečnog sistema"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT resizer ne moĹže izmjeniti vaĹĄu particiju, \n"
-"došlo je do sljedeće greške: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"VaĹĄa Windows particija je previĹĄe fragmentirana, molimo prvo pokrenite "
-"``defrag'' "
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX će sada promjeniti veličinu vaše Windows particije. Budite pažljivi, "
-"ova\n"
-"operacija je opasna. Ako to već niste uradili, najprije napustite "
-"instalaciju,\n"
-"pokrenite scandisk pod Windowsom (opcionalno pokrenite defrag), zatim\n"
-"ponovo pokrenite instalaciju. Također biste trebali spasiti sve podatke.\n"
-"Kada ste sigurni, kliknite na Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koju veličinu želite da sačuvate za windows na"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "particiji %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT promjena veličine nije uspjela: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za promjenu veličine ili upotrebu za "
-"loopback (ili nije ostalo dovoljno prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Pobriši čitav disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate viĹĄe od jednog hard diska, na koji Ĺželite instalirati linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Ručno particioniranje diska"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada moĹžete particionirati %s.\n"
-"Kada zavrĹĄite, ne zaboravite spasiti sa `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na vaĹĄoj Windows particiji"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ne mogu naći dovoljno prostora za instalaciju"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Particioni čarobnjak je našao sljedeća rješenja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspjelo: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Pokrećem mrežu"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Zaustavljam mreĹžu"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"DoĹĄlo je do greĹĄke, ali ne znam kako da je rijeĹĄim fino.\n"
-"Nastavite na vlastiti rizik."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvostruka tačka montiranja %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki bitni paketi nisu ispravno instalirani.\n"
-"Ili je neispravan vaš cdrom uređaj ili vaš cdrom medij.\n"
-"Provjerite cdrom na instaliranom računaru koristeći \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro doĹĄli u %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Nema pogodne disketne jedinice"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Prelazim na korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"VaĹĄ sistem ima nizak nivo resursa. MoĹžda imate neki problem sa instalacijom\n"
-"Mandrake Linuxa. Ako se ovo desi, moĹžete pokuĹĄati tekstualnu instalaciju. Za "
-"ovo,\n"
-"pritisnite `F1' prilikom bootanja na CDROMu, zatim unesite `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Klasa instalacije"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Molimo izaberite jednu od sljedećih klasa instalacije:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna veličina grupa koje ste izabrali je otprilike %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ako želite da instalirate manje od ove veličine,\n"
-"izaberite procenat paketa koje Ĺželite instalirati.\n"
-"\n"
-"Nizak procenat će instalirati samo one najbitnije pakete;\n"
-"procenat 100%% će instalirati sve izabrane pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na disku imate mjesta samo za %d%% ovih paketa.\n"
-"\n"
-"Ako Ĺželite da instalirate manje od ovoga,\n"
-"izaberite procenat paketa koje Ĺželite da instalirate.\n"
-"Nizak procenat će instalirati samo one najbitnije pakete;\n"
-"procenat %d%% će instalirati najveći mogući broj paketa."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Na idućem koraku ćete biti u mogućnosti da ih izaberete nešto preciznije."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procenat paketa za instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Izbor grupe paketa"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Izbor pojedinačnih paketa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veličina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Neispravan paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verzija: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veličina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Značaj: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ne moĹžete izabrati ovaj paket jer nema dovoljno prostora za njega"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Sljedeći paketi će biti instalirani"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Sljedeći paketi će biti uklonjeni"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ne možete izabrati/isključiti ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ovo je obavezan paket, ne može biti isključen"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne možete isključiti ovaj paket. On je već instaliran"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket mora biti unaprijeđen\n"
-"Jeste li sigurni da ga želite isključiti?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne možete isključiti ovaj paket. On mora biti unaprijeđen"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Automatski prikaĹži izabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalacija"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Učitaj/Spasi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "OsvjeĹžavam izbor paketa"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Izaberite pakete koje Ĺželite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Procjenjujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostalo vremena "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Molimo sačekajte, pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promjenite vaĹĄ CD-ROM!\n"
-"\n"
-"Molimo ubacite CD označen sa \"%s\" u vaš CD-ROM uređaj i pritisnite Ok kad "
-"ste spremni.\n"
-"Ako ga nemate, pritisnite Odustani da biste izbjegli instaliranje sa ovog CD-"
-"ROMa."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Svejedno nastavi?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Došlo je do greške pri naručivanju paketa:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "DoĹĄlo je do greĹĄke kod instaliranja paketa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "DoĹĄlo je do greĹĄke"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Da li zaista Ĺželite napustiti instalaciju?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licencni ugovor"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatura"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Molimo izaberite izgled vaĹĄe tastature."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je puna lista svih dostupnih tastatura"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Koju klasu instalacije Ĺželite?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instaliraj/Unaprijedi"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili update?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Preporučeno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Unaprijedi"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Unaprijedi samo pakete"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Molimo izaberite vrstu vaĹĄeg miĹĄa."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port miĹĄa"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Molimo izaberite na kojem serijskom portu je spojen vaĹĄ miĹĄ."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacija tipki"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 dugmeta"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 dugmeta"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PodeĹĄavam PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "PodeĹĄavam IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Pretražujem particije da nađem tačke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Izaberite tačke montiranja"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu pročitati vašu tabelu particija, previše je oštećena za mene :(\n"
-"Mogu pokušati da pobrišem loše particije (SVI PODACI će biti izgubljeni!).\n"
-"Drugo rješenje je da onemogućim DrakX da mijenja tabelu particija.\n"
-"(greĹĄka je %s)\n"
-"\n"
-"SlaĹžete li se sa gubitkom svih particija?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nije uspio ispravno pročitati tabelu particija.\n"
-"Nastavljate na vlastiti rizik!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će "
-"nastaviti, ali da biste bootali vaĹĄ sistem, morate kreirati bootstrap "
-"particiju u DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nije pronađena nijedna root particija radi unaprjeđivanja"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root particija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Ĺ ta je root particija (/) vaĹĄeg sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje Ĺželite formatirati"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Provjeri loĹĄe blokove?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatiram particije"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiram i formatiram datoteku %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Nemam dovoljno swap prostora da dovrĹĄim instalaciju, molimo dodajte joĹĄ"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "TraĹžim dostupne pakete"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Pronalazim pakete za unaprjeđenje"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Vaš sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Potpuna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimalna (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporučena (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite učitaj ili spasi izbor paketa na disketu.\n"
-"Format je isti kao i diskete koje generiĹĄe auto_install"
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Vrati sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Vraćam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Ubacite disketu koja sadrĹži izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Spasi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Izabrana veličina je veća od slobodnog prostora"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Vrsta instalacije"
-
-#: ../../install_steps_interactive.pm_.c:672
-#, fuzzy
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Niste izabrali nijednu grupu paketa\n"
-"Molimo izaberite minimalnu instalaciju koju Ĺželite"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Sa X-om"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporučeno)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve CDe na listi, kliknite na Ok.\n"
-"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
-"Ako nedostaju samo neki CDovi, isključite ih, zatim kliknite na Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM pod oznakom \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Post-instalacijsko podeĹĄavanje"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molimo ubacite boot disketu koja je upotrebljena u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molimo ubacite disketu Update Modula u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sada imate mogućnost da dobavite sa interneta unaprijeđene pakete koji\n"
-"su izaĹĄli nakon ĹĄto je distribucija objavljena.\n"
-"\n"
-"Dobićete sigurnosne ispravke ili ispravke bugova, ali prethodno je potrebno\n"
-"da podesite Internet konekciju.\n"
-"\n"
-"Da li želite instalirati unaprjeđenja ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontaktiram Mandrake Linux web stranicu da bih saznao listu dostupnih mirrora"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg će biti dobavljeni paketi"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Koja je vaĹĄa vremenska zona?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardverski sat podeĹĄen na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (koristeći NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nema štampača"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Imate li ISA zvučnu karticu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Pokrenite \"sndconfig\" poslije instalacije kako biste podesili vašu zvučnu "
-"karticu"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije otkrivena zvučna kartica. Probajte \"harddrake\" poslije instalacije"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Ukratko"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "MiĹĄ"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Štampač"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvučna kartica"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartica"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Podesite root ĹĄifru"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez ĹĄifre"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova ĹĄifra je previĹĄe jednostavna (mora biti duga najmanje %d karaktera)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentikacija"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentikacijski LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentifikacija NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domen"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prva disketna jedinica"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Druga disketna jedinica"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Preskoči"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, fuzzy, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(PAŽNJA! Vi koristite XFS za vaťu root particiju,\n"
-"pravljenje boot diskete na 1.44 Mb disketi vjerovatno neće\n"
-"raditi, poĹĄto XFS traĹži veoma velik drajver)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Žao mi je, nema dostupne disketne jedinice"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Izaberite disketnu jedinicu koju Ĺželite koristiti da napravite boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Ubacite disketu u %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Pravim boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripremam bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Izgleda da imate OldWorld ili Unknown računar,\n"
-" yaboot bootloader neće raditi kod vas.\n"
-"Instalacija će se nastaviti, ali ćete\n"
-" morati koristiti BootX za bootanje vašeg računara"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Da li Ĺželite koristiti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"GreĹĄka u instaliranju aboota, \n"
-"da li da pokušam nasilnu instalaciju čak i ako to uništi prvu particiju?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaliram bootloadera"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalacija bootloadera nije uspjela. Došlo je do sljedeće greške:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Možda ćete trebati promjeniti vaš Open Firmware boot uređaj\n"
-" da biste aktivirali bootloader. Ako ne vidite upit bootloadera\n"
-" prilikom bootanja, drĹžite Command-Option-O-F prilikom boota\n"
-" i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Zatim kucajte: shut-down\n"
-"Prilikom idućeg boota biste trebali vidjeti upit bootloadera."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u jedinicu %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Neki koraci nisu dovrĹĄeni.\n"
-"\n"
-"Da li zaista želite izaći sada?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Čestitamo, instalacija je završena.\n"
-"Uklonite boot medij i pritisnite return za reboot.\n"
-"\n"
-"\n"
-"Za informacije o ispravkama koje su dostupne za ovu verziju Mandrake "
-"Linuxa,\n"
-"pogledajte Errata koja je dostupna na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacije o podeĹĄavanju vaĹĄeg sistema su dostupne u poglavlju\n"
-"\"nakon instalacije\" vašeg Zvaničnog Mandrake Linux priručnika za upotrebu."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Ova auto instalacija moĹže biti potpuno automatizovana ako Ĺželite,\n"
-"u kojem slučaju će preuzeti hard disk!!\n"
-"(ovo je namjenjeno za instaliranje na drugi računar).\n"
-"\n"
-"Možda ćete željeti radije ponoviti instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizovano"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ponovi"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Spasi izbor paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> između elemenata | <Space> vrši izbor | <F12> idući ekran "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu nedostaje"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "nedostaje consolehelper"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Izaberi datoteku"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Osnovno"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Molimo sačekajte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "ProĹĄiri stablo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Smanji stablo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Prekidač između ravnog i grupnog sortiranja"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "PogreĹĄan izbor, pokuĹĄajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "VaĹĄ izbor? (podrazumjevano %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Stavke koje morate popuniti:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "VaĹĄ izbor? (0/1, podrazumjevano %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Dugme '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Da li Ĺželite kliknuti na ovo dugme?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "VaĹĄ izbor? (podrazumjevano '%s' %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari od kojih moĹžete izabrati (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Molimo unesite prvi broj od deset koji Ĺželite izmjeniti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"VaĹĄ izbor?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Primjetite, label je promjenjena:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Ponovo poĹĄalji"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Češka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Njemačka"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Ĺ panska"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finska"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francuska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "NorveĹĄka"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poljska"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruska"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Ĺ vedska"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK tastatura"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US tastatura"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisaća mašina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "AzerbejdĹžanska (latinica)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgijska"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bugarska (fonetska)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bugarska (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bjeloruska"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Švicarska (Njemački izgled)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Ĺ vicarska (Francuski izgled)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Češka (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Njemačka (bez mrtvih tipki)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (NorveĹĄka)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Ĺ vedska)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonska"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska (\"Ruski\" izgled)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska (\"Latinični\" izgled)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grčka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Mađarska"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Hrvatska"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelska"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (Fonetska)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranska"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandska"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italijanska"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanska 106 tipki"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejanska tastatura"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino-Američka"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvanska AZERTY (stara)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanska AYERTY (nova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanska \"red brojeva\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanska \"fonetska\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvijska"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandska"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalska"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Kvebek)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunska (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunska (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenačka"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovačka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovačka (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (ćirilica)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilska"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tajlandska tastatura"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadžička tastatura"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderni \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinska"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US tastatura (međunarodna)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnamska \"red brojeva\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latinično)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Desna Alt tipka"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Obje Shift tipke istovremeno"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control i Shift tipka istovremeno"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock tipka"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl i Alt tipke istovremeno"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt i Shift tipke istovremeno"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Meni\" tipka"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Lijeva \"Windows\" tipka"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Desna \"Windows\" tipka"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "KruĹžno montiranje %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Najprije ukloni logičke volumene\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podrĹĄka za 2.2 kernele viĹĄe ne postoji. Molim koristite 2.4 kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Opšti PS2 Miš sa kotačem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 dugme"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "OpĹĄti miĹĄ sa 2 dugmeta"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "OpĹĄti"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Kotač"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "OpĹĄti miĹĄ sa 3 dugmeta"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 dugmeta"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 dugmeta"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "nijedan"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Bez miĹĄa"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Molimo testirajte miĹĄ"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Da biste aktivirali miĹĄa,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMJERITE VAŠ KOTAČ!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Kraj"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sljedeći ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Prethodni"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najčešći način za konekciju sa adsl-om je pppoe.\n"
-"Neke konekcije koriste pptp, a vrlo rijetke koriste dhcp.\n"
-"Ako ne znate, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Koji dhcp klijent Ĺželite koristiti?\n"
-"Podrazumjevani je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije pronađen ethernet mrežni adapter na vašem sistemu.\n"
-"Ne mogu podesiti ovu vrstu konekcije."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Izaberite mreĹžni interface"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Molimo izaberite koji mreĹžni adapter Ĺželite koristiti za spajanje na Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nije pronađena mrežna kartica"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "PodeĹĄavam mreĹžu"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molimo unesite naziv vašeg računara ako ga znate.\n"
-"Neki DHCP serveri traĹže hostname kako bi radili.\n"
-"Naziv vašeg računara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao ĹĄto je ``mojcomp.mojlab.mojafirma.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Host name"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Čarobnjak za podešavanje mreže"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Koje je vrste vaĹĄa ISDN konekcija?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju Ĺželite?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. On sadrži moćne alate,\n"
-" ali ga je teĹĄko podesiti i nije standardiziran.\n"
-"\n"
-"* Novu konfiguraciju je lakĹĄe razumjeti, standardnija je,\n"
-" ali ima manje alata.\n"
-"\n"
-"Preporučujemo light konfiguraciju.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "PodeĹĄavanje ISDNa"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite vaĹĄeg providera.\n"
-" Ako nije na listi, izaberite Nije na listi"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Evropski protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropski protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (iznajmljene linije)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol Ĺželite koristiti?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Koju vrstu kartice imate?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaše kartice.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Prekid"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Nastavak"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Koja je vaĹĄa ISDN kartica ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Otkrio sam neku ISDN PCI karticu, ali ne znam tip. Molimo izaberite neku PCI "
-"karticu na idućem ekranu."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nije pronađena nijedna ISDN PCI kartica. Molimo izaberite jednu na idućem "
-"ekranu."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Molimo izaberite na koji serijski port je nakačen vaš modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcije dialupa"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Naziv konekcije"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Broj telefona"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skripta"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ime domena"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS server (opcionalno)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS server (opcionalno)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"MoĹžete se diskonektovati ili prekonfigurisati vaĹĄu konekciju."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"MoĹžete prekonfigurisati vaĹĄu konekciju."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste spojeni na Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"MoĹžete se spojiti na Internet ili prekonfigurisati vaĹĄu konekciju."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Trenutno niste konektovani na Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektuj me"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Prekini konekciju"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Podesi konekciju"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet konekcija & podeĹĄavanje"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada ćemo podesiti konekciju %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada ćemo podesiti konekciju %s.\n"
-"\n"
-"\n"
-"Pritisnite OK za nastavak."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "PodeĹĄavanje mreĹže"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Pošto radite mrežnu instalaciju, vaša mreža je već podešena.\n"
-"Kliknite na Ok da zadrĹžite tu konfiguraciju ili Odustani za podeĹĄavanje vaĹĄe "
-"Internet & MreĹžne konekcije.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobro došli u Čarobnjak za podešavanje mreže\n"
-"\n"
-"Sada ćemo podesiti vašu internet/mrežnu konekciju.\n"
-"Ako ne želite da koristite automatsko prepoznavanje, isključite opciju.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za podeĹĄavanje"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Koristi auto prepoznavanje"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Prepoznajem uređaje..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normalna modemska konekcija"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detektovan na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konekcija"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detektovan %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konekcija"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektovan na interfejsu %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "otkrivena kablovska konekcija"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN konekcija"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "prepoznata ethernet kartica(e)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite konekciju koju Ĺželite podesiti"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Podesili ste nekoliko načina za konekciju na Internet.\n"
-"Izaberite jedan od njih koji ćete koristiti.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet konekcija"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li Ĺželite pokrenuti konekciju prilikom boota?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "PodeĹĄavanje mreĹže"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Potrebno je restartovati mreĹžu"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"DoĹĄlo je do problema prilikom restartovanja mreĹže:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Čestitamo, podešavanje mreže i interneta je završeno.\n"
-"\n"
-"Sada će ova konfiguracija biti primjenjena na vaš sistem.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon što je to gotovo, preporučujemo da restartujete vaš X\n"
-"okoliš kako bi se izbjegao problem sa promjenom naziva računara."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"DoĹĄlo je do problema prilikom podeĹĄavanja.\n"
-"Provjerite vašu konekciju pomoću net_monitor ili mcc. Ako vaša konekcija ne "
-"radi, moĹžete ponovo pokrenuti podeĹĄavanje"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj uređaj je prethodno podešen za konekciju na Internet.\n"
-"Samo prihvatite kako bi ovaj uređaj ostao podešen.\n"
-"Izmjena polja ispod će prepisati ovu konfiguraciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molimo unesite IP konfiguraciju za ovaj računar.\n"
-"Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji\n"
-"razdvojenoj tačkama (npr. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Podešavam mrežni uređaj %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (drajver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatska IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti u formatu 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molimo unesite naziv vašeg računara ako ga znate.\n"
-"Naziv vašeg računara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao ĹĄto je ``mojcomp.mojlab.mojafirma.com''.\n"
-"Možete također unijeti IP adresu gateway-a ako ga imate"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (tj. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway uređaj"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfiguracija proxija"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Otkrij id mreĹžne karte (korisno za laptope)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba biti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet konfiguracija"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li se Ĺželite pokuĹĄati spojiti na Internet sada?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Probavam vaĹĄu konekciju..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistem je sada spojen na Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, sada će biti odspojen."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Izgleda da sistem nije spojen na Internet.\n"
-"Probajte promjeniti postavke vaĹĄe konekcije."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "PodeĹĄavanje konekcije"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Molimo ispunite ili provjerite polje ispod"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Vaš lični broj telefona"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Naziv provajdera (npr. provajder.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (opcionalno)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (opcionalno)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Izaberite vaĹĄu drĹžavu"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Način biranja broja"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Brzina konekcije"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Timeout konekcije (u sek.)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login naloga (korisničko ime)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Ĺ ifra naloga"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particije nisu podrĹžane na ovoj platformi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate rupu u vaĹĄoj tabeli particija li je ja ne mogu upotrijebiti.\n"
-"Jedino rjeĹĄenje je da pomjerite vaĹĄe primarne particija kako bi rupa bila "
-"pored extended particija"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Povratak iz datoteke %s nije uspio: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "LoĹĄa backup datoteka"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "GreĹĄka u pisanju datoteke: %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"NeĹĄto loĹĄe se deĹĄava na vaĹĄem disku. \n"
-"Test integriteta podataka nije uspio. \n"
-"To znači će da pisanje bilo čeka na disk rezultirati smećem"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "obavezno"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "vaĹžno"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "vrlo fino"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "fino"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "moĹžda"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokalni štampač"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Udaljeni štampač"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Štampač na udaljenom CUPS serveru"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Štampač na udaljenom lpd serveru"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Mrežni štampač (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Štampač na SMB/Windows 95/98/NT serveru"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Štampač na NetWare serveru"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Unesite URI uređaja štampača"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Spoji zadatak na komandu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nepoznat model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokalni štampači"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Udaljeni štampači"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na paralelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB štampač \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", višenamjenski uređaj na paralelnom portu \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", višenamjenski uređaj na USBu"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", višenamjenski uređaj na HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", višenamjenski uređaj"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", ĹĄtampa u %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", štampač \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na Windows serveru \"%s\", share \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell serveru \"%s\", štampač \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", koristeći komandu %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Sirovo ĹĄtampanje (Bez drajvera)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na ovom računaru)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS serveru \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Izaberi konekciju štampača"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je štampač povezan na računar?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Ovdje ne morate podešavati štampače na udaljenim CUPS serverima;\n"
-"ovi štampači će biti automatski prepoznati."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "PodeĹĄavanje CUPSa"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Navedite CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Da biste dobili pristup štampačima na udaljenim CUPS serverima u vašoj "
-"lokalnoj mreĹži, ne morate podeĹĄavati niĹĄta; CUPS serveri automatski "
-"informišu vaš računar o svojim štampačima. Svi štampači koji su trenutno "
-"poznati vašem računaru su izlistani u odjeljku \"Udaljeni štampači\" glavnog "
-"prozora Printerdrake-a. Ako vaĹĄ CUPS server nije u lokalnoj mreĹžu, morate "
-"unijeti IP adresu CUPS servera i eventualno broj porta kako biste dobili "
-"informacije o štampačima sa servera, inače ostavite ova polja praznim."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba biti u formatu 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Broj porta treba biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP CUPS servera"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatska konfiguracija CUPSa"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Prepoznajem uređaje ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Testiraj portove"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Dodaj novi štampač"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampača\n"
-"\n"
-"Ovaj čarobnjak vam omogućuje da instalirate lokalne ili udaljene štampače "
-"koji će biti korišteni sa ovog računara, a također i sa drugih računara na "
-"mreĹži.\n"
-"\n"
-"On će od vas tražiti sve potrebne informacije kako bi štampač bio podešen, a "
-"vama omogućen pristup svim dostupnim drajverima, opcijama drajvera i vrstama "
-"konekcije štampača."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokalni štampač"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampača\n"
-"\n"
-"Ovaj čarobnjak će vam pomoći da instalirate vaš(e) štampač(e) koji su "
-"povezani na ovaj računar.\n"
-"\n"
-"Molim uključite štampač(e) na ovom računaru i uključite ih. Kliknite na "
-"dugme \"Dalje\" kada budete spremni, a na \"Odustani\" ako ne Ĺželite da "
-"podesite vaše štampače sada.\n"
-"\n"
-"Obratite pažnju da neki računari mogu krahirati tokom automatskog "
-"prepoznavanja štampača. Isključite opciju \"Automatski prepoznaj štampače\" "
-"ako je ovo slučaj kod vas. Koristite \"Ekspertni mod\" printerdrake-a ako "
-"želite da podesite štampanje na udaljenom štampaču a printerdrake ga ne "
-"izlista automatski."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatski prepoznaj štampače"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Čestitamo, vaš štampač je sada instaliran i podešen!\n"
-"\n"
-"Možete štampati koristeći komandu \"Štampaj\" u vašoj aplikaciji (obično se "
-"nalazi u meniju \"Datoteka).\n"
-"\n"
-"Ako želite dodati, ukloniti ili promjeniti ime štampača, ili ako želite "
-"promjeniti neke podrazumjevane postavke (ulazni put papira, kvaliteta "
-"štampe...), izaberite opciju \"Štampač\" u \"Hardware\" sekciji Mandrake "
-"Kontrolnog centra."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatsko prepoznavanje štampača"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake može automatski prepoznati štampače koji su spojeni lokalno "
-"putem paralelne ili USB veze, ali zapamtite da na nekim sistemima automatsko "
-"prepoznavanje MOŽE ZALEDITI VAŠ SISTEM, ŠTO MOŽE VODITI DO OŠTEČENJA "
-"DATOTEČNIH SISTEMA! Zato ovo radite NA VAŠU ODGOVORNOST!\n"
-"\n"
-"Da li zaista želite da vaši štampači budu prepoznati automatski?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Koristi auto prepoznavanje"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Ručno podesite štampač"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detektovan %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Štampač na paralelnom portu \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB štampač \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Nije pronađen nijedan lokalni štampač! Ako želite ručno instalirati štampač, "
-"unesite ime uređaja / ime datoteke na ulaznu liniju (Paralelni portovi: /dev/"
-"lp0, /dev/lp1, ..., ekvivalentno LPT1:, LPT2:, ..., prvi USB štampač: /dev/"
-"usb/lp0, drugi USB štampač: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Morate unijeti naziv uređaja ili datoteke!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Nije pronađen nijedan lokalni štampač!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Mrežni štampači mogu biti instalirani samo nakon završetka instalacije. "
-"Izaberite \"Hardware\" i zatim \"Štampač\" u Mandrake Kontrolnom centru."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Da instalirate mrežne štampače, kliknite na \"Odustani\", prebacite na "
-"\"Ekspert mod\" i kliknite ponovo na \"Dodaj novi štampač\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Sljedeći štampač je prepoznat automatski: ako to nije onaj koji želite "
-"podesiti, uneiste naziv uređaja / naziv datoteke u ulaznu liniju"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Ovo je lista svih automatski prepoznatih štampača. Molimo izaberite štampač "
-"koji želite podesiti ili unesite naziv uređaja / naziv datoteke na ulaznu "
-"liniju"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Sljedeći štampač je prepoznat automatski. Podešavanje štampača će raditi "
-"potpuno automatski. Ako vaš štampač nije ispravno prepoznat ili ako želite "
-"sami podesiti štampač, uključite \"Ručno podešavanje\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Ovo je lista svih automatski prepoznatih štampača. Molim odaberite štampač "
-"koji želite podesiti. Podešavanje štampača će raditi potpuno automatski. Ako "
-"vaš štampač nije ispravno prepoznat ili ako želite sami podesiti štampač, "
-"uključite \"Ručno podešavanje\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Molimo izaberite port na koji je vaš štampač povezan ili unesite naziv "
-"uređaja / naziv datoteke na ulaznoj liniji"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Molimo izaberite na koji port je priključen vaš štampač."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno sa LPT1:, "
-"LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Morate izabrati ili unijeti štampač / uređaj!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ručno podešavanje"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Da li je vaš štampač višenamjenski uređaj od HPa (OfficeJet, PSC, "
-"PhotoSmart, LaserJet 1100/1200/1220/3200/3300 sa skenerom)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instaliram HPOJ paket..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Provjeravam uređaj i podešavam HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instaliram SANE paket..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skeniram na vašem HP višenamjenskom uređaju"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Omogućujem CUPSu port štampača ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Čitam bazu podataka o štampačima ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcije udaljenog lpd štampača"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Da biste koristili udaljeni lpd štampač, morate dati ime računara za printer "
-"server i ime štampača na tom serveru."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Ime udaljenog računara"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ime udaljenog štampača"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Ime udaljenog računara nedostaje!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Ime udaljenog štampača nedostaje!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcije SMB (Windows 9x/NT) štampača"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Da biste štampali na SMB štampač, morate dati ime SMB računara (Pažnja! Ono "
-"može biti različito od TCP/IP imena!) i eventualno IP adresu print servera, "
-"kao i share naziv štampača kojem želite pristupiti i korisničko ime, šifru i "
-"informacije o radnoj grupi."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB server ime"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB server IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Share naziv"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Radna grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Treba biti dato ili ime servera ili IP adresa servera!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Naziv samba share-a nedostaje!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcije NetWare štampača"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Da biste štampali na NetWare štampač, trebate dati naziv NetWare print "
-"servera (Pažnja! Ono može biti različito od njegovog TCP/IP imena!) kao i "
-"naziv reda za štampu na štampaču kojem želite pristupiti i eventualno "
-"korisničko ime i šifru."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printer Server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Naziv reda za ĹĄtampu"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP naziv servera nedostaje!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP naziv reda nedostaje!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/socket opcije štampača"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Da biste štampali na TCP ili socket štampač, morate dati hostname štampača i "
-"opcionalno broj porta. Na HP JetDirect serverima broj porta je obično 9100, "
-"na ostalim serverima on može varirati. Pogledajte priručnik vašeg hardware-a."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Hostname štampača"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Hostname štampača nedostaje!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI uređaja štampača"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Možete dati direktno URI za pristup štampaču. URI mora zadovoljavati ili "
-"CUPS ili Foomatic specifikacije. Obratite paĹžnju da nisu svi tipovi URIja "
-"podrĹžani od svih spoolera."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Trebate unijeti ispravan URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svakom štampaču treba dati ime (npr. \"stampac\"). Polja Opis i Lokacija "
-"nije potrebno popuniti. Oni su komentari za korisnike."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Naziv štampača"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripremam bazu podataka o štampačima..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model vašeg štampača"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake je uporedi ime modela koje je dobijeno od automatskog "
-"prepoznavanja štampača sa modelima koji su navedeni u njegovoj bazi podataka "
-"kako bi našao najbliži. Ovaj izbor možda nije tačan, pogotovo ako vaš "
-"štampač uopšte nije naveden u bazi. Stoga provjerite da li je izbor ispravan "
-"i ako je tako kliknite \"Model je ispravan\", u suprotnom kliknite "
-"\"Izaberite model ručno\" kako biste ručno izabrali vaš model štampača na "
-"sljedećem ekranu.\n"
-"\n"
-"Za vaš štampač Printerdrake je našao:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Model je ispravan"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Izaberite model ručno"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Izbor modela štampača"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Koji model štampača imate?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Molim provjerite da li je Printerdrake izvrĹĄio ispravno automatsko "
-"prepoznavanje modela vašeg štampača. Potražite ispravan model na listi ako "
-"kursor stoji na pogrešnom modelu ili na \"Raw štampač\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ako štampač nije naveden, izaberite kompatibilan (pogledajte uputstva za "
-"štampač) ili sličan."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "PodeĹĄavanje OKI winprinter-a"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Sada podešavate OK laserski winprinter. Ovi štampači\n"
-"koriste jedan poseban komunikacijski protokol i stoga rade samo kada su "
-"spojeni na prvom paralelnom portu. Ako je vaš štampač spojen na neki drugi "
-"port ili na print server molimo spojite štampač na prvi paralelni port prije "
-"nego što odštampate testnu stranicu. Inače štampač neće raditi. Drajver će "
-"ignorisati vaĹĄe podeĹĄenje tipa konekcije."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "PodeĹĄavanje Lexmark inkjet-a"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet drajveri za štampu koje obezbjeđuje Lexmark podržavaju samo lokalne "
-"štampače, a ne i štampače na udaljenim računarima ili print serverima. "
-"Molimo spojite vaš štampač na lokalni port ili ga podesite na računaru na "
-"koji je spojen."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Da biste mogli ĹĄtampati sa vaĹĄim Lexmark inkjetom na ovoj konfiguraciji, "
-"potrebni su vam inkjet drajveri za štampu koje obezbjeđuje Lexmark (http://"
-"www.lexmark.com/). Idite na US stranicu i kliknite na dugme \"Drivers\". "
-"Zatim izaberite vaĹĄ model a zatim \"Linux\" kao operativni sistem. Drajveri "
-"dolaze u vidu RPM paketa ili shell skripte sa interaktivnom grafičkom "
-"instalacijom. Ne morate obaviti ovu konfiguraciju na grafičkom interfejsu. "
-"Odustanite odmah nakon licencnog ugovora. Zatim odĹĄtampaje stranice za "
-"poravnavanje glava sa \"lexmarkmaintain\" i podesite opcije poravnanja glave "
-"pomoću ovog programa."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Podrazumjevane opcije štampača\n"
-"\n"
-"Trebate provjeriti da su veličina papira i tip tinte (ako je dostupno) "
-"ispravno podeĹĄeni. Obratite paĹžnju da za voma veliku kvalitetu / rezoluciju "
-"ĹĄtampa moĹže postati znatno sporija."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s izvan raspona!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li želite da podesite ovaj štampač (\"%s\")\n"
-"kao podrazumjevani štampač?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testna stranica"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Molimo izaberite testne stranice koje ćete štampati.\n"
-"PaĹžnja: foto testna stranica moĹže traĹžiti dosta vremena za ĹĄtampu a na "
-"laserskim štampačima sa malo memorije možda neće nikad ni izaći. U većini "
-"slučajeva dovoljno je odštampati standardnu testnu stranicu."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Nijedna testna strana"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Ĺ tampaj"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardna testna strana"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna strana (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna strana (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto testna strana"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Nemoj ĹĄtampati testnu stranicu"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Ĺ tampam testnu stranicu..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna stranica je poslana štampaču.\n"
-"Može potrajati određeno vrijeme dok štampač krene.\n"
-"Status ĹĄtampanja:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testna stranica je poslana štampaču.\n"
-"Može potrajati određeno vrijeme dok štampač krene.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Da li je radilo ispravno?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Sirovi štampač"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Za ĹĄtampanje datoteke sa komandne linije (terminalski prozor) moĹžete "
-"koristiti ili komandu \"%s <datoteka>\" ili grafički alat za štampu: \"xpp "
-"<datoteka>\" ili \"kprinter <datoteka>\". Grafički alati vam omogućuju da "
-"jednostavno odaberete štampač i izmjenite podešenja opcija.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ove komande možete također koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za ĹĄtampu mnogih aplikacija, ali ovdje ne morate navesti ime "
-"datoteke jer tu datoteku obezbjeđuje sama aplikacija.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komanda \"%s\" također omogućava izmjenu opcija za pojedinačni zadatak "
-"ĹĄtampe. Jednostavno dodajte Ĺželjena podeĹĄenja na komandnu liniju, npr. \"%s "
-"<datoteka>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampač ili pročitajte listu "
-"koja je data ispod ili kliknite na dugme \"Lista opcija za ĹĄtampu\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Ovo je lista mogućih opcija za štampu za trenutni štampač:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Za ĹĄtampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ovu komandu također možete koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za ĹĄtampu mnogih aplikacija. Ovdje nije potrebno navesti naziv "
-"datoteke jer tudatoteku obezbjeđuje sama aplikacija.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampač kliknite na dugme "
-"\"Lista opcija za ĹĄtampu\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Za ĹĄtampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Možete također koristiti grafički interfejs \"xpdq\" za podešavanje opcija i "
-"upravljanje zadacima ĹĄtampe.\n"
-"Ako koristite KDE okruĹženje radne povrĹĄine imate \"dugme za paniku\". To je "
-"ikona na radnoj površini čiji je naziv \"ZAUSTAVI štampač!\", koja "
-"zaustavlja sve zadatke ĹĄtampe odmah kada kliknete na nju. Ovo je korisno "
-"npr. u slučaju zaglavljivanja papira.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komande \"%s\" i \"%s\" također omogućavaju izmjenu opcija za pojedinačni "
-"zadatak ĹĄtampe. Jednostavno dodajte Ĺželjena podeĹĄenja na komandnu liniju, "
-"npr. \"%s <datoteka>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ĺ tampam/skeniram na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Štampam na štampač \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Lista opcija za ĹĄtampu"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Vaš HP višenamjenski uređaj je automatski konfigurisan kako bi mogao "
-"skenirati. Sada možete skenirati sa komandne linije pomoću komande "
-"\"scanimage\" (\"scanimage -d hp:%s\" kako biste naveli scanner ako imate "
-"više od jednog) ili koristeći grafičke okoline \"xscanimage\" ili \"xsane\". "
-"Ako koristite GIMP, možete također skenirati koristeći odgovarajuću stavku u "
-"meniju \"File\"/\"Acquire\". Za viĹĄe informacija, pogledajte joĹĄ i \"man "
-"scanimage\" i \"man sane-hp\" na komandnoj liniji.\n"
-"\n"
-"Nemojte koristiti \"scannerdrake\" za ovaj uređaj!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Vaš HP višenamjenski uređaj je automatski konfigurisan kako bi mogao "
-"skenirati. Sada možete skenirati sa komandne linije pomoću komande \"ptal-hp "
-"%s scan ...\". Skeniranje putem grafičkog interfejsa ili iz GIMPa još nije "
-"podržano za vaš uređaj. Više informacija možete naći u datoteci\"/usr/share/"
-"doc/hpoj-0.8/ptal-hp-scan.html\" na vašem računaru. Ako imate HP LaserJet "
-"1100 ili 1200, moĹžete skenirati samo ako ste instalirali opciju za "
-"skeniranje.\n"
-"\n"
-"Nemojte koristiti \"scannerdrake\" za ovaj uređaj!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Čitam podatke o štampaču..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Premještanje konfiguracije štamapča"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Možete kopirati konfiguraciju štampača koju ste napravili za spooler %s u % "
-"s, vaš trenutni spooler. Svi podaci o konfiguraciji (naziv štampača, opis, "
-"lokacija, tip konekcije kao i podrazumjevane opcije) će biti preuzeti, ali "
-"zadaci štampe neće biti prebačeni.\n"
-"Svi redovi ne mogu biti prebačeni zbog sljedećih razloga:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podržava štampače na Novell serverima ili štampačekoji šalju podatke "
-"u komandama slobodnog oblika.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podržava samo lokalne štampače, udaljene LPD štampačei Socket/TCP "
-"štampače.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podržavaju IPP štampače.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Pored toga, redovi koji nisu kreirani ovim programom ili sa \"foomatic-"
-"configure\" ne mogu biti premjeĹĄteni."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Također štampači konfigurisani sa PPD datotekama koje su osigurali njihovi "
-"proizvođači ili sa vlastitim CUPS drajverima ne mogu biti prebačeni."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Označite štampače koje ćete prebacivati i kliknite na \n"
-"\"Prebaci\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Nemoj prebacivati štampače"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Prebaci"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Štampač pod imenom \"%s\" već postoji pod %s: \n"
-"Kliknite na \"Prebaci\" da to prepiĹĄete.\n"
-"Možete također unijeti novo ime ili preskočiti ovaj štampač."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Naziv štampača bi se trebao sastojati od slova, brojeva i donje linije"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Štampač \"%s\" već postoji,\n"
-"da li sigurno Ĺželite prepisati ovu konfiguraciju?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Novo ime štampača"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Prebacujem %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Prebacili ste vaš bivši podrazumjevani štampač (\"%s\"),Da li će to također "
-"biti podrazumjevani štampač podnovim sistemom štampe %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Osvježavam podatke o štampaču..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Podešavanje udaljenog štampača"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Pokrećem mrežu..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Sada podesite mreĹžu"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "MreĹžna funkcionalnost nije podeĹĄena"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Sada ćete podesiti udaljeni štampač. Ovo zahtjeva aktivan pristup mreži, ali "
-"vaĹĄa mreĹža joĹĄ uvijek nije podeĹĄena. Ako Ĺželite nastaviti bez podeĹĄavanja "
-"mreže, nećete moći koristiti štampač koji sada podešavate. Kako želite da "
-"nastavimo?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Nastavi bez podeĹĄavanja mreĹže"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"PodeĹĄavanje mreĹže koje je napravljeno tokom instalacije sada ne moĹže biti "
-"pokrenuto. Molim provjerite da li će mreža postati dostupna nakon bootanja "
-"sistema i popravite podešenja koristeći Mandrake Kontrolni centar, sekcija "
-"\"Mreža i Internet\"/\"Konekcija\", a zatim podesite štampač, ponovo "
-"koristeći Mandrake Kontrolni centar, sekcija \"Hardver\"/\"Štampač\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"MreĹžni pristup nije aktivan i nije mogao biti pokrenut. Molimo provjerite "
-"vaĹĄu konfiguraciju i vaĹĄ hardware. Onda ponovo pokuĹĄajte podesiti udaljeni "
-"štampač."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Restartujem sistem za ĹĄtampu ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "visok"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoičan"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram sistem za ĹĄtampu na sigurnosnom nivou: %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sada ćete instalirati sistem za štampu %s na sistemu koji je na sigurnosnom "
-"nivou % s.\n"
-"\n"
-"Ovaj sistem za štampu pokreće demon (pozadinski proces) koji čeka zadatke "
-"štampe i rješava ih. Ovom demonu takođe mogu pristupiti drugi računari putem "
-"mreže, tako da je to moguća tačka napada. Stoga se tek rijetki od odabranih "
-"demona pokreću na ovom sigurnosnom nivou.\n"
-"\n"
-"Da li zaista želite podesiti štampanje na ovom računaru?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Pokrećem sistem za štampu tokom boota"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem za štampu (%s) se neće pokrenuti automatski prilikom boota računara.\n"
-"\n"
-"Moguće je da je automatsko pokretanje isključeno prilikom promjene na viši "
-"nivo sigurnosni, pošto je sistem za štampu moguća tačka napada.\n"
-"\n"
-"Da li želite da ponovo uključite automatsko pokretanje sistema za štampu?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Provjeravam instalirani software..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Uklanjam LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Uklanjam LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Izaberite spooler štampača"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem ĹĄtampanja (spooler) Ĺželite koristiti?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Podešavam štampač \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instaliram Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcije štampača"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Pripremam PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "PodeĹĄavam aplikacije..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Da li Ĺželite podesiti ĹĄtampanje?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistem ĹĄtampe: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Sljedeći štampači su podešeni. Dvokliknite na štampač da promjenite njegove "
-"postavke; da ga učinite podrazumjevanim štampačem; da vidite informacije o "
-"njemu; ili da učinite štampač na udaljenom CUPS serveru upotrebljivim iz "
-"Star Office/OpenOffice.org-a."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Sljedeli štampači su podešeni. Kliknite dva puta na neki od njih za izmjenu "
-"postavki; ako ga želite učiniti podrazumjevanim štampačem; ili da biste "
-"vidjeli informacije o njemu."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Osvježi listu štampača (kako bi bili prikazani svi dostupni CUPS štampači)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Promjenite sistem ĹĄtampe"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalni mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Želite li podesiti još jedan štampač?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Izmjeni konfiguraciju štampača"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Štampač %s\n"
-"Šta želite da izmjenite na ovom štampaču?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Uradi!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tip konekcije štampača"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Naziv štampača, opis, lokacija"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvođač štampača, model, drajver"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Proizvođač štampača, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Podesi štampač kao podrazumjevani"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Dodaj ovaj štampač u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Ukloni ovaj štampač iz Star/Open Offica"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Ĺ tampaj testnu stranicu"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Saznaj kako koristiti ovaj štampač"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Ukloni štampač"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Uklanjam stari štampač \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Podrazumjevani štampač"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Štampač \"%s\" je sada podešen kao podrazumjevani štampač."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Dodajem štampač u Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Štampač \"%s\" je uspješno dodan u Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Nisam uspio dodati štampač \"%s\" u Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Uklanjam štampač iz Star/Open Offica"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Štampač \"%s\" je uspješno uklonjen iz Star/Open Offica."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Nisam uspio ukloniti štampač \"%s\" iz Star/Open Offica."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li želite da uklonite štampač \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Uklanjam štampač \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "PodeĹĄavanje proxija"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobro doĹĄli u alat za podeĹĄavanje proxija.\n"
-"qn Ovdje ćete biti u prilici da podesite vaše http i ftp proxije\n"
-"sa ili bez logina i ĹĄifre\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molimo popunite informacije o http proxiju\n"
-"Ostavite polja praznim ako ne Ĺželite http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba počinjati sa 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port treba biti broj"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molimo popunite informacije o ftp proxiju\n"
-"Ostavite polja praznim ako ne Ĺželite ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba počinjati sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Molimo unesite login i ĹĄifru za proxy, ako su potrebni.\n"
-"Ostavite polja praznim ako ne Ĺželite login/ĹĄifru"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ĹĄifra"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ponovo unesite ĹĄifru"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Ĺ ifre se ne poklapaju. PokuĹĄajte opet!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatiran_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne mogu pisati datoteku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (moĹžda nedostaju raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreni ALSA zvučni sistem (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron periodični pokretač komandi."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se koristi za nadgledanje statusa baterija i logovanje preko\n"
-"sysloga. Također se može koristiti za gašenje računara kada su baterije "
-"potroĹĄene."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokreće komande zakazane putem at komande u vrijeme koje je zadato\n"
-"prilikom pokretanja at-a, te pokreće pozadinske komande kada je nizak "
-"prosječni nivo opterećenja."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardan UNIX program koji pokreće programe koje zada korisnik\n"
-"u periodičnim terminima. vixie cron dodaje veći broj mogućnosti osnovnom\n"
-"UNIX cronu, uključujući bolju sigurnost i moćnije opcije za podešavanje."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podrĹĄku za miĹĄa tekst-baziranim aplikacijama kao ĹĄto je\n"
-"Midnight Commander. On također omogućuje konzolne isjeci/zaljepi operacije\n"
-"pomoću miša i uključuje podršku za pop-up menije na konzoli."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake pokreće probavanje hardware-a i opcionalno konfiguriše\n"
-"novi/izmjenjeni hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web server. Koristi se za posluĹživanje HTML\n"
-"datoteka i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Demon za nadgledanje Interneta (obično nazvan inetd) pokreće\n"
-"raznolike druge Internet servise po potrebi. Odgovoran je za pokretanje\n"
-"raznih servisa, kao što su telnet, ftp, rsh i rlogin. Isključivanje inetd-a\n"
-"isključuje sve servise za koje je on nadležan."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokrenite filtriranje paketa za Linux kernel seriju 2.2 kako\n"
-"biste postavili firewall i zaštitili vaš računar od mrežnih napada."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket učitava izabranu mapu tastature kao što je podešeno u\n"
-"/etc/sysconfig/keyboarc. Ovo moĹže biti izabrano koriĹĄtenjem kbdconfig\n"
-"programa. Možete ovo ostaviti uključenim na većini računara."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatsko regenerisanje kernel zaglavlja u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatsko prepoznavanje i podeĹĄavanje hardware-a tokom boota."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf će ponekad obaviti raznolike zadatke tokom boota\n"
-"kako bi se odrĹžala sistemska konfiguracija."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je demon za ĹĄtampu koji je potreban da bi lpr radio ispravno.\n"
-"To je u osnovi server koji dodjeljuje zadatke štampe štampaču/ima."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n"
-"i dostupnosti."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) koji se koristi za pretvaranje "
-"imena računara u IP adrese."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i demontira sve Network File System (NFS), SMB (Lan\n"
-"Manager/Windows) i NCP (NetWare) tačke montiranja."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/deaktivira sve mreĹžne interfejse koji su konfigurisani\n"
-"za pokretanje tokom boota."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreĹža.\n"
-"Ovaj servis omogućuje funkcionalnost NFS servera, koji je podešen putem\n"
-"/etc/exports datoteke."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreĹža.\n"
-"Ovaj servis omogućuje NFS funkcionalnost zaključavanja datoteka."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uključuje numlock bravu tipaka pod konzolom i\n"
-"XFree tokom boota."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podrška za OK 4w i kompatibilne windows štampače"
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podrška je obično za podržavanje stvari kao što je\n"
-"ethernet i modemi u laptopima. Neće se pokrenuti dok se ne\n"
-"konfiguriše tako da je sigurno imati ga instaliranog na računarima\n"
-"kojima nije potreban."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao ĹĄto\n"
-"su NFS i NIS. Portmap server mora raditi na računarima koje služe kao\n"
-"serveri za protokole koji koriste RPC mehanizam."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, tj. program koji ĹĄalje poĹĄtu sa jednog "
-"računara na drugu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Spašava i vraća sistemski raspon entropije za veću kvalitetu\n"
-"generisanja slučajnih brojeva."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodjeljuje sirove uređaje blokovskim urećajima (kao što su\n"
-"particije hard diska) za upotrebu aplikacijama kao ĹĄto je Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon omogućuje da se automatska IP tabela rutiranja podešava\n"
-"preko RIP protokola. Mada se RIP često koristi na malim mrežama, "
-"kompleksniji\n"
-"protokoli rutiranja su potrebni za sloĹžene mreĹže."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokol omogućava korisnicima na mreži da dobave\n"
-"mjeru performansi za svaki računar na toj mreži"
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokol omogućava korisnicima na mreži da identificiraju\n"
-"ko je prijavljen na ostalim računarima."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokol omogućava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika prijavljenih na računar na kojem radi rwho demon (slično fingeru)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Pokreće zvučni sistem na vašem računaru"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog je pogodnost pomoću koje mnogi demoni zapisuju poruke\n"
-"u razne sistemske dnevnike. Dobra ideja je uvijek imati pokrenuti syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Pokreće drajvere za vaše usb uređaje."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreće X Font Server (ovo je nužno da bi XFree radio)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Ĺ tampa"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Dijeljenje datoteka"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistem"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Udaljena administracija"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Server baze podataka"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviran za %d registrovan"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servisi"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktivan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljen"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i demoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, izvinite."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Prilikom boota"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Hvala vam ĹĄto ste odabrali Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Dobro doĹĄli u svijet otvorenog izvornog koda"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Uspjeh MandrakeSofta je baziran na principima Slobodnog softvera. VaĹĄ novi "
-"operativni sistem je rezultat zajedničkog rada dijela Linux zajednice širom "
-"svijeta"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "PridruĹžite se svijetu Slobodnog softvera"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Upoznajte Open Source zajednicu i postanite njen član. Učite, podučavajte i "
-"pomozite drugima tako što ćete pristupiti mnogim forumima za diskusiju koje "
-"ćete naći na našim \"Community\" stranicama"
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet i razmjena poruka"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 pruĹža najbolji softver za pristup svemu ĹĄto Internet "
-"pruža: Pretražujte web i pregledajte animacije pomoću Mozilla-e i "
-"Konquerora, razmjenjujte email i organizirajte vaše lične podatke pomoću "
-"Evolution i KMail-a, i mnogo drugog"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedija i grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vam omogućuje da potjerate vaš multimedijalni računar do "
-"krajnjih granica! Koristite najnoviji softver za sluĹĄanje muzike i audio "
-"datoteka, mijenjajte i organizujte vaĹĄe slike i fotografije, gledajte TV i "
-"video-snimke i mnogo drugog"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Programiranje"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 je najbolja platforma za razvoj aplikacija. Otkrijte moć "
-"GNU gcc kompajlera kao i najboljih razvojnih okolina koje su Open Source"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolni centar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 Kontrolni centar je jedinstvena lokacija za puno "
-"prilagođavanje i podešavanje vašeg Mandrake sistema"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Korisnički okoliš"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 nudi vam na izbor 11 različitih grafičkih desktop okolina "
-"i window managera uključujući GNOME 1.4, KDE 2.2.2, Window Maker 0.8 i druge"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Serverski softver"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Pretvorite vaš računar u moćan server sa svega nekoliko klikova mišem: Web "
-"server, email, firewall, file i print server, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 pruĹža najbolje Open Source igre - arkadne, akcione, "
-"karte, sportovi, strategije, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Želite li naučiti Linux jednostavno, brzo i besplatno? MandrakeSoft vam nudi "
-"besplatno učenje Linuxa kao i način za testiranje vašeg napretka na "
-"MandrakeCampus-u -- naĹĄem online centru za obuku"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalitetna podrĹĄka od strane Linux zajednice i MandrakeSofta nalazi se odmah "
-"iza ugla. A ako ste već Linux veteran, postanite \"Expert\" i dijelite vaše "
-"znanje na naĹĄem web sajtu za podrĹĄku"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Za sve vaĹĄe IT projekte, naĹĄi konsultanti su spremni da analiziraju vaĹĄe "
-"potrebe i ponude prilagođeno rješenje. Iskoristite veliko iskustvo "
-"MandrakeSofta kao proizvođača Linux rješenja kako biste ponudili pravu IT "
-"alternativu za vaĹĄ biznis"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Čitav raspon Linux rješenja, kao i posebne ponude za proizvode i "
-"'potrepĹĄtine', dostupni su u naĹĄoj online radnji"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Za viĹĄe informacija o MandrakeSoftovim profesionalnim uslugama i "
-"komercijalnoj ponudi, molimo posjetite sljedeću web stranicu:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu čitati vašu tabelu particija, previše je oštećena za mene :(\n"
-"Pokušaću izbrisati loše particije"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "GreĹĄka!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ne mogu pronaći potrebnu image datoteku '%s'"
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "PodeĹĄavanje auto instalacije"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sada ćete podesiti Auto Instalacijsku disketu. Ova opcija je pomalo opasna i "
-"mora biti koriĹĄtena uz paĹžnju.\n"
-"\n"
-"Sa ovom opcijom bićete u mogućnosti da ponovite instalaciju koju ste obavili "
-"na ovom računaru, pri ćemu ćete biti interaktivno upitani za neke korake, "
-"kako biste promjenili njihove vrijednosti.\n"
-"\n"
-"Za maksimalnu sigurnost, particioniranje i formatiranje nikad neće biti "
-"obavljeno automatski, bez obzira ĹĄta izaberete tokom instalacije na ovaj "
-"računar.\n"
-"\n"
-"Da li Ĺželite nastaviti?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automatska konfiguracija koraka"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Molimo izaberite za svaki korak da li ćete ga ponoviti kao i u vašoj "
-"instalaciji ili će se obaviti ručno"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Dobro doĹĄli.\n"
-"\n"
-"Parametri automatske instalacije su dostupni u odjeljcima lijevo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Čestitamo!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa je uspjeĹĄno napravljena.\n"
-"Sada moĹžete ponoviti vaĹĄu instalaciju."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Auto instalacija"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Dodaj stavku"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Ukloniti zadnju stavku"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup IzvjeĹĄtaj \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup IzvjeĹĄtaj o demonima\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup Detalji izvjeĹĄtaja\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "ukupno napredak"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Backup-uj sistemske datoteke..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Datoteke backup-a hard diska..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Backup-uj korisničke datoteke..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Napredak backup-a hard diska..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Backup-uj ostale datoteke..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"lista datoteka poslana putem FTPa : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) problem sa FTP konekcijom: Nije bilo moguće poslati vaše backup datoteke "
-"putem FTPa.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) GreĹĄka tokom slanja poĹĄte. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Izbor datoteka"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Izaberite datoteke ili direktorije i kliknite na 'Dodaj'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Molimo uključite sve potrebne opcije.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ove opcije mogu spasiti ili vratiti sve datoteke u vaĹĄem /etc direktoriju.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Backup sistemskih datoteka. ( /etc direktorij )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Zaobiđi kritične datoteke (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Sa ovom opcijom bićete u mogućnosti da vratite bilo koju\n"
-" verziju vaĹĄeg /etc direktorija."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Molimo izaberite sve korisnike koje želite uključiti u vaš backup."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ne uključuj spremnik web preglednika"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Koristi inkrementalni backup (nemoj prebrisati stare backupe)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Ukloni izabrano"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Korisnici"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Koristi FTP vezu za backup"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Molimo unesite ime računara ili IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Molimo unesite direktorij za\n"
-" smještaj backupa na ovom računaru."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Molimo unesite vaĹĄ login"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Molimo unesite vaĹĄu ĹĄifru"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Zapamti ovu ĹĄifru"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP konekcija"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sigurna konekcija"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Koristi CD/DVDROM za backup"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Molimo izaberite vaĹĄ CD prostor"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Molim uključite ako koristite CDRW medij"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Molim uključite ako želite obrisati vaš CDRW prije"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Molim izaberite ako želite uključiti\n"
-" instalacijski boot na CDu."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Molim unesite naziv uređaja vašeg CD Writera\n"
-" npr: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Koristi traku za backup"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Molim unesite ime uređaja kojeg ćete koristiti za backup"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Molim unesite maksimalnu veličinu\n"
-" dozvoljenu za Draxbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Molimo unesite direktorij za spasiti:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Koristi quotu za backup datoteke."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "MreĹža"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "svakog sata"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dnevno"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "sedmično"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "mjesečno"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Koristi demon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Izaberite vremenski interval\n"
-"između svakog backupa"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Molim izaberite medij\n"
-"za backup."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Koristi hard disk sa demonom"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Koristi FTP sa demonom"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Molim budite sigurni da je cron demon aktiviran u vaĹĄim servisima."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "PoĹĄalji mail izvjeĹĄtaj nakon svakog backupa na :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Ĺ ta"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Gdje"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kada"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "ViĹĄe opcija"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "PodeĹĄavanje Drakbackup-a"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Molimo izaberite gdje Ĺželite backupovati"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na hard disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "preko mreĹže"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Molim izaberite ĹĄta Ĺželite backupovati"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Backup sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Backup korisnika"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Ručno izaberite korisnika"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Izvori backup-a: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- sistemske datoteke:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- korisničke datoteke:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- ostale datoteke:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- spasi na hard disku u direktoriju : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- spasi na FTPu na računaru : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t korisničko ime: %s\n"
-"\t\t u direktoriju: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opcije:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNe uključuj sistemske datoteke\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackupi koriste tar i bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackupi koriste tar i gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Demon (%s) uključuje :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-MreĹžu preko FTPa.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-MreĹžu preko SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Bez podešavanja, molim kliknite na Čarobnjak ili Napredno.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista podataka za vraćanje:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista oštećenih podataka:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Molimo isključite ili pobrišite ga idući put."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Backup datoteke su oštećene"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr " Svi vaĹĄi izabrani podaci su "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " uspjeĹĄno spaĹĄeni na %s "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr " Vrati konfiguraciju "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK za vraćanje ostalih datoteka."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista korisnika za vraćanje (samo najsvježiji datum po korisniku je značajan)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Vrati sistemske datoteke prije:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "molim izaberite datum za vraćanje"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Koristi hard disk za backup"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Vrati sa hard diska"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Molim unesite direktorij gdje su smjeĹĄteni backupi"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Izaberite drugi medij za vraćanje"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Drugi medij"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Vrati sistem"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Vrati korisnike"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Vrati ostalo"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "izaberite stazu za vraćanje (umjesto / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Izvrši novi backup prije vraćanja (samo za inkrementalni backup.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Pobriši korisničke direktorije prije vraćanja."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Vrati sve backupe"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Ručno vraćanje"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Pomoć"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Prethodni"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Spasi"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Izgradi backup"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Vrati"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Sljedeći"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Molimo pokrenite Izgradi backup prije vraćanja...\n"
-" ili provjerite da li je put za spaĹĄavanje ispravan."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-"GreĹĄka tokom sendmaila\n"
-" vaĹĄ mail izvjeĹĄtaj nije poslan\n"
-" Molim podesite sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista paketa za instalaciju"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"GreĹĄka tokom slanja datoteke preko FTPa.\n"
-" Molimo ispravite vaĹĄu FTP konfiguraciju."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Molim izaberite podatke za vraćanje..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Molim izaberite medij za backup..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Molim izaberite podatke za backup..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nije pronađena konfiguraciona datoteka \n"
-"molim kliknite na Čarobnjak ili Napredno."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "U izradi ... molim sačekajte."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Backup sistemskih datoteka"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Backup korisničkih datoteka"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Backup ostalih datoteka"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Ukupan napredak"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "slanje datoteka putem FTPa"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Ĺ aljem datoteke..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista podataka koji će biti smješteni na CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Molim unesite brzinu cd pisača"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Molim unesite naziv uređaja vašeg CD pisača (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Molim uključite ako želite imati instalacioni boot na vašem CDu."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Backup-uj sada iz konfiguracijske datoteke"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Pogledaj postavke backupa."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Čarobnjak za podešavanje"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Napredno podeĹĄavanje"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Backup-uj sada"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Neke greĹĄke prilikom slanja poruka moĹže izazvati \n"
-" loše podešen postfix. Ovo možete riješiti tako što ćete\n"
-" podesiti myhostname ili mydomain u /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %sa nije uspjela. Javila se sljedeća greška:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "PretraĹži instalirane fontove"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Isključi instalirane fontove"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "obradi sve fontove"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nije pronađen nijedan font"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "gotovo"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ne mogu naći nijedan font na montiranim particijama"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ponovo izaberi ispravne fontove"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ne mogu naći nijedan font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "PretraĹži fontove na listi instaliranih"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopiranje fontova"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalacija True Type fontova"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "molimo sačekajte tokom ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "ZavrĹĄena True Type instalacija"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverzija fontova"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst kreiranje"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referenciranje"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf fonts konverzija"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm fonts konverzija"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Onemogući privremene datoteke"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Restartuj XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Onemogući datoteke fontova"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "restart xfs-a"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Prije instaliranja fontova, provjerite da li imate dozvole da ih koristite i "
-"instalirate na va[em sistemu.\n"
-"\n"
-"-Možete instalirati fontove koristeći uobičajen način. U rijetkim "
-"slučajevima, neispravni fontovi mogu zaglaviti vaš X Server."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Uvoz fontova"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Preuzmi fontove iz Windowsa"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Deinstaliraj fontove"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Napredne opcije"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista fontova"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Izaberite aplikacije koje će podržavati fontove :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Razni štampači"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Izaberite font datoteku ili direktorij i kliknite na 'Dodaj'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Lista instalacije"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "kliknite ovdje ako ste sigurni."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "ovdje ako ne."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "NiĹĄta izabrano"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Sve izabrano"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "PobriĹĄi listu"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Probni inicijali"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopiraj fontove na sistem"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instaliraj i konvertuj fontove"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post Install"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "PobriĹĄi fontove sa mog sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post Uninstall"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet konekcije"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje Internet konekcije je trenutno aktivno"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"aktivno.\n"
-"\n"
-"Ĺ ta Ĺželite uraditi?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "isključi"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "otkaĹži"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "rekonfiguriĹĄi"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Isključujem servere..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Dijeljenje Internet konekcije je sada isključeno."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje Internet konekcije je trenutno neaktivno"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"neaktivno.\n"
-"\n"
-"Ĺ ta Ĺželite uraditi?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "uključi"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Uključujem servere..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Dijeljenje Internet konekcije je sada uključeno."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sada ćete konfigurisati vaš računar za dijeljenje Internet konekcije.\n"
-"Sa ovom opcijom, ostali računari na vašoj lokalnoj mreži će moći koristiti "
-"Internet konekciju ovog računara. \n"
-"\n"
-"Napomena: potreban vam je poseban MreĹžni adapter da biste podesili Lokalnu "
-"mreĹžu (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (koristeći modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nema mreĹžnog adaptera na vaĹĄem sistemu!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Na vašem sistemu nije pronađen nijedan ethernet mrežni adapter. Molimo "
-"pokrenite alat za podeĹĄavanje hardware-a."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "MreĹžni interface"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Trenutno je samo jedan mreĹžni adapter podeĹĄen na vaĹĄem sistemu:\n"
-"\n"
-"%s\n"
-"\n"
-"Sada ću podesiti vašu Lokalnu mrežu sa ovim adapterom."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Molimo izaberite koji mrežni adapter će biti spojen na vašu Lokalnu mrežu."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Mrežni interfejs je već podešen"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Upozorenje, mrežni adapter (%s) je već podešen.\n"
-"\n"
-"Da li Ĺželite automatsko ponovno podeĹĄavanje?\n"
-"\n"
-"To možete obaviti ručno, ali morate znati šta radite."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatsko ponovno podeĹĄavanje"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "PrikaĹži postavke trenutnog interfejsa"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Trenutna konfiguracija `%s':\n"
-"\n"
-"MreĹža: %s\n"
-"IP adresa: %s\n"
-"IP atributi: %s\n"
-"Drajver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Mogu zadržati trenutnu konfiguraciju i pretpostaviti da ste već podesili "
-"DHCP server; u tom slučaju molim provjerite da li sam ispravno pročitao "
-"mrežu C klase koju ćete koristiti na lokalnoj mreži; neću je ponovo podesiti "
-"i neću mijenjati vaše postavke DHCP servera.\n"
-"\n"
-"Ako ne, mogu ponovo podesiti vaĹĄ interfejs i podesiti DHCP server za vas.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokalna mreĹža C klase"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP adresa (ovog) DHCP servera"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Ponovo podesi interfejs i DHCP server"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalna mreĹža se ne zavrĹĄava sa `.0', izlazim."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalan konflikt LAN adresa pronađen u trenutnoj konfiguraciji %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Otkrivena konfiguracija firewalla!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje! Pronađena je postojeća konfiguracija firewalla. Možda će biti "
-"potrebno neko ručno podešavanje nakon instalacije."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "PodeĹĄavam..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Podešavam skripte, instaliram software, pokrećem servere..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi tokom instaliranja paketa %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je konfigurisano.\n"
-"Sada možete dijeliti Internet konekciju sa ostalim računarima na vašoj "
-"lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Podešavanje je već završeno, ali je trenutno isključeno."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Podešavanje je već završeno i trenutno je uključeno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje Internet konekcije nije nikad podeĹĄeno."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "PodeĹĄavanje dijeljenja Internet konekcije"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"DobrodoĹĄli u alat za Dijeljenje Internet konekcije!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Podesi da pokrenete čarobnjak."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "PodeĹĄavanje mreĹže (%d adaptera)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil:"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "BriĹĄi profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil za brisanje:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Naziv profila koji će biti kreiran (novi profil je kreiran kao kopija "
-"postojećeg) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Hostname: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Pristup Internetu"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Molim sačekajte"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Podesi Internet pristup..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "PodeĹĄavanje LANa"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drajver"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfejs"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Podesi Lokalnu mreĹžu..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Kliknite ovdje za pokretanje čarobnjaka ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Čarobnjak..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Primjeni"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo sačekajte... Primjenjujem konfiguraciju"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektovan"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nije konektovan"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektuj se..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Prekini konekciju..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Upozorenje, otkrivena je druga Internet konekcija, moĹžda preko vaĹĄe mreĹže"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijedan podeĹĄen interfejs.\n"
-"Podesite ih prvo klikajući na 'Podesi'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "PodeĹĄavanje LANa"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot protokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Pokrenut na bootu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "pokreni sada"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "zaustavi sada"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Interfejs joĹĄ nije podeĹĄen.\n"
-"Pokrenite čarobnjak za podešavanje u glavnom prozoru"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijednu Internet konekciju.\n"
-"Napravite jednu klikajući na 'Podesi'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "PodeĹĄavanje Internet konekcije"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "PodeĹĄavanje Internet konekcije"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tip konekcije: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "PodeĹĄavanje nivoa sigurnosti"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koji Ĺželite koristiti"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kablovska)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kablovska)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kablovska)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Istočna Evropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irska"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Zapadna Evropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australija"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Novi Zeland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "JuĹžna Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Molim,\n"
-"unesite vaĹĄ tv standard i drĹžavu"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV standard :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Oblast :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Pretraga TV kanala je u toku ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "TraĹžim TV kanale"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "upotreba: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Molimo izaberite izgled vaĹĄe tastature."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Želite li da BackSpace vrati Delete u konzoli?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Promjenite CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Molimo ubacite Instalacioni CD u vaš CD-ROM uređaj i pritisnite Ok kad ste "
-"spremni.\n"
-"Ako ga nemate, pritisnite Odustani da bi se izbjegao live upgrade."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu da pokrenem live upgrade !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Izmjena je napravljena, ali da bi stupila na snagu morate se odjaviti"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "PrikaĹži samo za izabrani dan"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/File/_New"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Datoteka/_Otvori"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Datoteka/_Sačuvaj"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Datoteaka/Sačuvaj _kao"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Datoteka/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcije"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcije/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Pomoć"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Pomoć/_O programu..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Korisnik"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Poruke"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "ObjaĹĄnjenja Mandrake alata"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "pretraĹživanje"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Alat za pregled vaĹĄih logova"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "PodeĹĄavanja"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "matching"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "but not matching"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Izaberi datoteku"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendar"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "SadrĹžaj datoteke"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Mail/SMS obavijest"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "molim sačekajte, parsiram datoteku: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "PodeĹĄavanje Mail/SMS obavijesti"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Dobro doĹĄli u aplikaciju za podeĹĄavanje mail/SMSa.\n"
-"\n"
-"Ovdje moĹžete podesiti sistem obavjeĹĄtavanja.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "postavke servisa"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"MoĹžete primiti obavjeĹĄtenje ako neki od izabranih servisa prestane raditi"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "postavka opterećenja"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"Primićete upozorenje ako je opterećenje (system load) veće od ove vrijednosti"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "postavka upozorenja"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Podesite način na koji će vas sistem obavijestiti"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Sačuvaj kao..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Molimo izaberite vrstu vaĹĄeg miĹĄa."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nije pronađen serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuliraj treće dugme?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s je pronađen na %s, podesi ga ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Izaberite skener"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Ovaj %s skener nije podrĹžan"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot uređaj"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Ovaj %s skener se mora podesiti iz printerdrake-a.\n"
-"MoĹžete pokrenuti printerdrake iz Mandrake Kontrolnog centra u odjeljku "
-"Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "PodeĹĄavanje firewalla"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "PodeĹĄavanje firewalla"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Već ste podesili firewall.\n"
-"Kliknite na Podesi kako bi se izmjenio ili uklonio firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Kliknite na Podesi za podeĹĄavanje standardnog firewalla"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Izaberite svoj jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Izaberite klasu instalacije"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Prepoznavanje hard diska"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "PodeĹĄavanje miĹĄa"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Izaberite vaĹĄu tastaturu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podešavanje datotečnih sistema"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiranje particija"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izaberite pakete za instalaciju"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Sistem instalacije"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodajte korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "PodeĹĄavanje mreĹže"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "PodeĹĄavanje servisa"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalacija bootloadera"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Napravite boot disketu"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "PodeĹĄavanje X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Instaliraj sistemske update"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Napusti instalaciju"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall podešavač\n"
-"\n"
-"On podešava lični firewall za ovaj Mandrake Linux računar.\n"
-"Za moćnu soluciju posebnog firewalla, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada ćemo vam postaviti pitanja o servisima kojima želite dozvoliti\n"
-"pristup sa Interneta. Molimo razmislite paĹžljivo o ovim pitanjima,\n"
-"jer je sigurnost vašeg računara bitna.\n"
-"\n"
-"Molimo vas, ako trenutno ne koristite neki od ovih servisa, isključite\n"
-"ga firewallom. MoĹžete izmjeniti ove postavke kad god Ĺželite ponovnim\n"
-"pokretanjem ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut web server na ovom računaru za koji želite da ga\n"
-"cijeli Internet vidi? Ako imate pokrenut webserver kojem ćete pristupati\n"
-"samo sa ovog računara, možete slobodno ovdje odgovoriti NE.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut name server (DNS) na ovom računaru? Ako niste\n"
-"podesili DNS radi davanja informacija o IP i zoni cijelom Internetu, \n"
-"molimo vas odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li Ĺželite da dozvolite ulazne Secure Shell (ssh) konekcije? Ovo\n"
-"je zamjena za telnet koju moĹžete koristiti za prijavu. Ako sada koristite\n"
-"telnet, definitivno trebate preći na ssh. Telnet nije kriptovan, tako\n"
-"da neki napadači mogu ukrasti vašu šifru ako ga koristite. ssh je\n"
-"kriptovan i ne dozvoljava ovo prisluĹĄkivanje."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li Ĺželite dozvoliti ulazne telnet konekcije?\n"
-"Ovo je uĹžasno nesigurno, kao ĹĄto je objaĹĄnjeno na prethodnom\n"
-"ekranu. Strogo preporučujemo da odgovorite Ne ovdje i koristite\n"
-"ssh umjesto telneta.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li imate pokrenut FTP server za koji želite da je pristupačan sa\n"
-"Interneta? Ako da, onda strogo preporučujemo da ga koristite samo\n"
-"za anonimne transfere. Bilo koju ĹĄifru koja je poslana putem FTPa\n"
-"mogu ukrasti napadači, pošto FTP također ne koristi kriptovanje.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut mail server ovdje? Ako ĹĄaljete poruke\n"
-"kroz pine, mutt ili neki drugi tekst-bazirani mail klijent, onda\n"
-"vjerovatno imate. U suprotnom, trebali biste isključiti ovo \n"
-"firewallom.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut POP ili IMAP server ovdje? Ovo bi\n"
-"bilo koriĹĄteno za smjeĹĄtaj ne-web-baziranih mail naloga\n"
-"za ljude na ovom računaru.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Čini se da koristite 2.2 kernel. Ako je vaša mrežna IP\n"
-"automatski podešena putem računara u vašoj kući ili\n"
-"uredu (dinamički dodjeljena), moramo ovo dozvoliti. Da\n"
-"li je ovo slučaj?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li vaš računar sinhronizuje vrijeme sa drugim računarom?\n"
-"Najčešće, ovo se koristi u srednje velikim Unix/Linux organizacijama\n"
-"za sinhronizaciju vremena za pravljenje dnevnika i slično. Ako\n"
-"niste dio većeg ureda i niste čuli za ovo, onda vjerovatno\n"
-"ovo nije slučaj."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"PodeĹĄavanje zavrĹĄeno. MoĹžemo li zapisati ove izmjene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu otvoriti %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu otvoriti %s za pisanje: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Ne, ne treba mi DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Da, treba mi DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Ne, ne treba mi NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Da, treba mi NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Nemoj snimiti"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Snimi i izađi"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Čarobnjak za podešavanje firewalla"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Ne (isključi pristup sa interneta)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Da (dozovoli pristup sa interneta)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Molim sačekajte... Provjeravam instalirane pakete"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"GreĹĄka prilikom instaliranja paketa : %s i Bastille.\n"
-" Pokušajte ih instalirati ručno."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mrežni računar (klijent)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ured"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za vaĹĄ Palm Pilot ili Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name i Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Uredski programi: obrada teksta (kword, abiword), tablični alati (kspread, "
-"gnumeric), pdf preglednici itd."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Alati vezani za zvuk: mp3 ili midi playeri, mixeri itd."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Howto-i na temu Linuxa i Slobodnog Software-a"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skup alata za mail, news, web, prenos datoteka i chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Baze podataka"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL baza podataka"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lakše podešavanje računara"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Korisni programi"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Alati za konzolu"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail server, Inn news server"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijalna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "PodeĹĄavanje"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Druge grafičke okoline (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, osnovno grafičko okruženje sa izborom pratećih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafičko okruženje"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za pravljenje i prĹženje CDova"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Uredska radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafički programi kao što je Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi i include datoteke"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Network Computer server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Stanica za igru"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video playeri i editori"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkadne igre, igre za tablu, strategije itd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Skup alata za čitanje i slanje pošte i news-a (pine, mutt, tin...) i "
-"pregledanje Weba"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, nadzor"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Lične finansije"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafički okoliš sa skupom korisnički orjentisanih aplikacija i alata za "
-"radnu povrĹĄinu"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razne protokole uključujući ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programi za pregled i editovanje zvuka i videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Ostale grafičke okoline"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editori, ljuske, datotečni alati, terminali"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za upravljanje vaĹĄim finansijama, kao ĹĄto je gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Upravljanje ličnim informacijama"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - PrĹženje CDa"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Znanstvena radna stanica"
-
-#~ msgid "About"
-#~ msgstr "O programu"
-
-#~ msgid " Help "
-#~ msgstr " Pomoć "
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-2,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Ne mogu pristupiti kernel modulima koji odgovaraju vaĹĄem kernelu "
-#~ "(nedostaje datoteka %s)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Nijedan"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Izaberite default štampač!"
-
-#~ msgid ""
-#~ "With remote CUPS servers, you do not have to configure any printer here; "
-#~ "CUPS servers inform your machine automatically about their printers. All "
-#~ "printers known to your machine currently are listed in the \"Default "
-#~ "printer\" field. Choose the default printer for your machine there and "
-#~ "click the \"Apply/Re-read printers\" button. Click the same button to "
-#~ "refresh the list (it can take up to 30 seconds after the start of CUPS "
-#~ "until all remote printers are visible). When your CUPS server is in a "
-#~ "different network, you have to give the CUPS server IP address and "
-#~ "optionally the port number to get the printer information from the "
-#~ "server, otherwise leave these fields blank."
-#~ msgstr ""
-#~ "Sa udaljenim CUPS serverom, ne morate podeĹĄavati nijedan\n"
-#~ "štampač ovdje; CUPS serveri obavještavaju vaš računar automatski\n"
-#~ "o svojim štampačima. Svi štampači koji su trenutno poznati vašem\n"
-#~ "računaru su izlistani u polju \"Podrazumjevani štampač\". Izaberite "
-#~ "podrazumjevani\n"
-#~ "štampač za vaš računar ovdje i kliknite na dugme \"Primjeni/Ponovo\n"
-#~ "pročitaj štampače\". Kliknite na isto dugme za osvježavanje liste (može\n"
-#~ "trajati do 30 sekundi nakon pokretanja CUPSa dok svi udaljeni štampači\n"
-#~ "ne postanu vidljivi). Kada je vaš CUPS server u različitoj mreži, morate "
-#~ "dati\n"
-#~ "IP adresu CUPS servera i eventualno broj porta kako bi se dobavile "
-#~ "informacije\n"
-#~ "o štampačima sa servera, inače ostavite ova polja praznim."
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Primjeni/Ponovo pročitaj štampače"
-
-#~ msgid "Configure printing system"
-#~ msgstr "PodeĹĄavanje sistema ĹĄtampe"
diff --git a/perl-install/share/po/ca.po b/perl-install/share/po/ca.po
deleted file mode 100644
index 0663d463f..000000000
--- a/perl-install/share/po/ca.po
+++ /dev/null
@@ -1,14978 +0,0 @@
-# drakX translation to Catalan
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Copyright (c) 1999-2001 Softcatalŕ
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-04-10 23:29+0200\n"
-"Last-Translator: Softcatalŕ <traddrake@softcatala.org>\n"
-"Language-Team: Catalan\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configura tots els capçals independentment"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Utilitza l'extensió Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configura només la targeta \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuració Multi-head"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"El vostre sistema permet l'ús d'una configuració de múltiples capçals.\n"
-"Quč voleu fer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Targeta grŕfica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccioneu una targeta grŕfica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolliu un servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolliu un servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quina configuració de l'XFree voleu tenir?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari, perň només amb "
-"l'Xfree %s.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "Xfree %s amb acceleració 3D de maquinari"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s amb acceleració 3D de maquinari EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari, perň només amb "
-"l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR.\n"
-"L'XFree %s, que pot tenir un suport millor en 2D, suporta la vostra targeta."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuració de l'XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccioneu la mida de memňria de la vostra targeta grŕfica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolliu les opcions per al servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolliu un monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Els dos parŕmetres més importants son la velocitat de refresc vertical, que\n"
-"és la velocitat a quč es refresca tota la pantalla, i el més important, la\n"
-"velocitat de sincronització horitzontal, que és la velocitat a quč es\n"
-"visualitzen les línies d'exploració.\n"
-"\n"
-"És MOLT IMPORTANT que no especifiqueu un tipus de monitor amb un abast\n"
-"de sincronització superior a les possibilitats del vostre monitor, perquč\n"
-"el podríeu fer malbé.\n"
-"En cas de dubte, sigueu conservador amb aquest parŕmetre."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Velocitat de refresc horitzontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Velocitat de refresc vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "El monitor no estŕ configurat"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "La targeta grŕfica encara no estŕ configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Encara no s'han escollit les resolucions"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Avís: la comprovació d'aquesta targeta grŕfica pot penjar-vos l'ordinador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Comprova la configuració"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"intenteu canviar alguns parŕmetres"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "S'ha produďt un error:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Sortida en %d segons"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "És aquest el parŕmetre corrcte?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "S'ha produďt un error, intenteu canviar alguns parŕmetres"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolució"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolliu la resolució i la profunditat de color"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Targeta grŕfica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor xFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Més"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "D'acord"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mode expert"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostra'ls tots"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolucions"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposició del teclat: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipus de ratolí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositiu del ratolí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronització horitzontal del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresc vertical del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Targeta grŕfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Targeta grŕfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memňria grŕfica: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profunditat del color: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolució: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor xFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de l'xFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "S'estŕ preparant la configuració de l'X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Quč voleu fer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Canvia el monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Canvia la targeta grŕfica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Canvia les opcions del servidor"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Canvia la resolució"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostra la informació"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Torna-ho a comprovar"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Surt"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Voleu conservar els canvis?La configuració actual és:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X a l'inici"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Puc configurar el vostre ordinador de manera que executi X automŕticament "
-"durant l'arrencada.\n"
-"Voleu que X s'iniciď quan torneu a arrencar l'ordinador?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Si us plau, torneu a entrar a %s per activar els canvis"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Si us plau, sortiu i utilitzeu Ctrl-Alt-Enrere"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colors (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.768 colors (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.536 colors (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milions de colors (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4.294 milions de colors (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB o més"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estŕndard, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrellaçada (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrellaçada, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA ampliada, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA no entrellaçada, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA d'alta freqüčncia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-freqüčncia que pot fer 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-freqüčncia que pot fer 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-freqüčncia que pot fer 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que pot fer 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que pot fer 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primer sector de la partició d'arrencada"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector de la unitat (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalˇlació del SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "On voleu instalˇlar el carregador d'arrencada?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalˇlació del LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO amb menú de text"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO amb menú grŕfic"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrencada des de DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opcions principals del carregador d'arrencada"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Carregador d'arrencada a utilitzar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalˇlació del carregador d'arrencada"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositiu d'arrencada"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (no funciona en BIOS antics)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacte"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacte"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mode de vídeo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Demora abans d'arrencar la imatge predeterminada"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Contrasenya"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Contrasenya (un altre cop)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limita les opcions de la línia d'ordres"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limita"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Buida /tmp en cada arrencada"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Mida exacta de la RAM, si cal (s'han trobat %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Habilita perfils múltiples"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Introduďu la mida de la RAM en Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L'opció ``Limita les opcions de la línia d'ordres'' no té cap ús sense una "
-"contrasenya"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Missatge d'inicialització"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Demora de firmware obert"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Temps mŕxim d'arrencada del nucli"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Voleu habilitar l'arrencada des de CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Voleu habilitar l'arrencada des d'OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS per defecte?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Aquestes són les diferents entrades.\n"
-"Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Afegeix"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fet"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Modifica el RAID"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Quin tipus d'entrada voleu afegir?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Un altre SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Un altre SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Un altre SO (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imatge"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Arrel"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Afegeix"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lectura-escriptura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taula"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "No segur"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Predeterminat"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Elimina l'entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "No es permet una etiqueta buida"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Heu de tenir una partició d'intercanvi"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Aquesta etiqueta ja estŕ en ús"
-
-# #msgid "Found %s %s interfaces"
-# #msgstr "S'han trobat interfícies %2$s %1$s"
-#: ../../any.pm_.c:656
-#, fuzzy, c-format
-msgid "Found %s %s interfaces"
-msgstr "S'han trobat interfícies %2$s %1$s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "En teniu una altra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Teniu alguna interfície %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Sí"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Mira la informació del maquinari"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "S'estŕ instalˇlant el programa de control per a la targeta %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(mňdul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quin programa de control %s he de provar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"En alguns casos, el programa de control %s necessita informació addicional\n"
-"per funcionar correctament, tot i que normalment funciona bé sense ella.\n"
-"Voleu especificar opcions addicionals o deixar que el programa de control\n"
-"cerqui al vostre ordinador la informació que necessita? Aquesta recerca\n"
-"podria blocar l'ordinador, perň aixň no causaria cap dany."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Exploració automŕtica"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especifica les opcions"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ara podeu proporcionar les seves opcions per al mňdul %s.\n"
-"Les opcions estan amb el format ``nom=valor nom2=valor2 ...''.\n"
-"Per exemple, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcions del mňdul:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ha fallat la cŕrrega del mňdul %s.\n"
-"Voleu tornar-ho a intentar amb altres parŕmetres?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ja s'ha afegit %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Aquesta contrasenya és massa senzilla"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Si us plau, introduďu un nom d'usuari"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"El nom d'usuari només pot contenir lletres en minúscula, números, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Aquest nom d'usuari ja s'ha afegit"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Afegeix un usuari"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduďu un usuari\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accepta l'usuari"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nom real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nom d'usuari"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Entrada automŕtica"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Puc configurar el vostre ordinador de manera que entri automŕticament amb un "
-"nom d'usuari.\n"
-"Si no voleu utilitzar aquesta característica, feu clic al botó Cancelˇla."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolliu l'usuari per omissió:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolliu el gestor de finestres per executar:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Podeu seleccionar altres idiomes, que quedaran disponibles després de la "
-"instalˇlació"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tots"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Afegeix un usuari"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalitzada"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "S'estŕ iniciant el CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Quins paquets voleu instalˇlar"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelˇla"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Benvinguts, crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estŕndard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alt"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alt"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoic"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Aquest nivell s'ha d'utilitzar amb cura. Fa el vostre sistema molt més "
-"fŕcil\n"
-"d'utilitzar, perň també molt sensible: no s'ha d'utilitzar en un ordinador\n"
-"connectat a d'altres o a Internet. No s'hi accedeix mitjançant contrasenya."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ara, la contrasenya estŕ habilitada, perň l'ús com a ordinador de xarxa "
-"segueix sense ser recomanable."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Aquesta és la seguretat estŕndard recomanada per a un ordinador que\n"
-"s'utilitzarŕ per connectar-se a Internet com a client. Ara hi ha "
-"comprovacions de seguretat."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Amb aquest nivell de seguretat, la utilització d'aquest sistema com a\n"
-"servidor esdevé possible.\n"
-"La seguretat és ara prou alta com per utilitzar el sistema com a servidor\n"
-"que accepti connexions de molts clients. "
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Assumim les característiques del nivell 4, perň ara el sistema estŕ\n"
-"totalment tancat.\n"
-"Les característiques de seguretat estan al mŕxim."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escolliu el nivell de seguretat"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "S'estŕ establint el nivell de seguretat"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolliu les opcions per al servidor"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvingut al %s, el selector de sistema operatiu!\n"
-"\n"
-"Trieu un sistema operatiu de la lista superior, o espereu\n"
-"%d segons per arrencar en el sistema operatiu predeterminat.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Benvingut al GRUB, el selector de sistema operatiu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Utilitzeu les tecles %c i %c per seleccionar quina posició estŕ ressaltada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Premeu Intro per arrencar el SO seleccionat, 'e' per editar les"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordres prčvies a l'arrencada, o 'c' per obtenir una línia d'ordres."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La posició ressaltada arrencarŕ automŕticament dintre de %d segons."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "no hi ha prou espai a /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Escriptori"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menú Inici"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "On voleu instalˇlar el carregador d'arrencada?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "encara no s'ha implementat cap ajuda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fitxer"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fitxer/_Surt"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor de categorització NewStyle"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor NewStyle"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ tradicional"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Executa l'Aurora durant l'arrencada"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Mode LILO/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Mode Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvingut a la utilitat de compartició de la connexió a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a Configura per executar l'auxiliar de configuració."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configura"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Mode de sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Executa el sistema X-Window en iniciar"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "No, no vull l'entrada automŕtica"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sí, vull l'entrada automŕtica amb aquest (usuari, escriptori)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "D'acord"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "no es pot obrir /etc/inittab per a lectura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "kB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuts"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segons"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "No puc afegir cap més partició"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Podeu seleccionar altres idiomes, que quedaran disponibles després de la "
-"instalˇlació"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "França"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemany"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grec"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Noruec"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Consulteu"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italiŕ"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "sčrie"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Si us plau, feu primer una cňpia de seguretat de les vostres dades"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Llegiu-ho atentament!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si penseu utilitzar aboot, assegureu-vos de deixar espai lliure (amb 2.048\n"
-"sectors n'hi ha prou) al començament del disc"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Error"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Trieu una acció"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teniu una partició FAT gran\n"
-"(utilitzada normalment pel DOS/Windows de Microsoft).\n"
-"Suggereixo que primer en canvieu la mida\n"
-"(feu-hi clic i després feu clic a \"Canvia la mida\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Si us plau, feu clic a una partició "
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalls"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ha fallat el muntatge"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Intercanvia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Buit"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Altres"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipus de sistema de fitxers"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilitzeu ``%s'' al seu lloc"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Suprimeix"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Utilitzeu primer ``Unmount''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Després de canviar el tipus de la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Trieu una acció"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Crea una nova partició"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Normal > Expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Expert > Normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Desfés"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Voleu continuar igualment?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Surt sense desar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Voleu sortir sense desar la taula de particions?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Assigna automŕticament"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Buida-ho tot"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Informació del correu"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "S'utilitzen totes les particions primŕries"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "No puc afegir cap més partició"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Per tenir més particions, suprimiu-ne una per poder crear una partició "
-"ampliada"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Escriu la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Rescata la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Muntatge automŕtic del suport extraďble"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Seleccioneu el fitxer"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La cňpia de seguretat de la taula de particions no té la mateixa mida\n"
-"Voleu continuar igualment?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advertčncia"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inseriu un disquet a la unitat\n"
-"Se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "S'estŕ intentant rescatar la taula de particions"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Informació del correu"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punt de muntatge"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcions"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Canvia la mida"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Mou"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formata"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Munta"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Afegeix al RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Afegeix al LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmunta"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Elimina del RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Elimina del LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifica el RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Utilitza per a loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crea una nova partició"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "sector d'inici: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Mida en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipus de sistema de fitxers: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punt de muntatge: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferčncia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "S'estŕ formatant el fitxer de loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Canvia el tipus de partició"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Quin sistema de fitxers voleu?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "On voleu muntar el fitxer de loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "On voleu muntar el dispositiu %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"No es pot anulˇlar el punt de muntatge, perquč aquesta partició\n"
-"s'utilitza per al loopback. Elimineu primer el loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "S'estan calculant els límits del sistema de fitxers de la FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "S'estŕ canviant la mida"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "No es pot canviar la mida d'aquesta partició"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Cal fer una cňpia de seguretat de totes les dades d'aquesta partició"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Després de canviar la mida de la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escolliu la nova mida"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Mida en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "A quin disc us voleu desplaçar?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "A quin sector us voleu desplaçar?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "S'estŕ desplaçant"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "S'estŕ desplaçant la partició..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolliu un RAID existent al qual afegir"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nou"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolliu un LVM existent al qual afegir"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nom LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Aquesta partició no es pot utilitzar per al loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nom del fitxer de loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nom real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Un altre loopback ja estŕ utilitzant el fitxer, escolliu-ne un altre"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "El fitxer ja existeix. El voleu utilitzar?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcions del mňdul:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositiu"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivell"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "mida del tros"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Aneu amb compte: aquesta operació és perillosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Quin tipus de particionament?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Fins al moment no puc acceptar crear el /boot a la unitat (a un cilindre > "
-"1024).\n"
-"O esteu utilitzant LILO, i no funcionarŕ, o no l'esteu utilitzant i no "
-"necessiteu el /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La partició que heu seleccionat per afegir com a arrel (/) estŕ ubicada "
-"físicament més enllŕ del cilindre nş 1024 del disc dur, i no teniu cap "
-"partició /boot.\n"
-"Si teniu previst utilitzar el gestor d'arrencada LILO, penseu d'afegir una "
-"partició /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Heu seleccionat una partició de programari RAID com a arrel (/).\n"
-"Aixň no ho pot gestionar cap carregador d'arrencada sense una partició /"
-"boot.\n"
-"Per tant, assegureu-vos d'afegir una partició /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La taula de particions de la unitat %s s'escriurŕ al disc!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Us caldrŕ tornar a arrencar per tal que les modificacions tinguin efecte"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Després de formatar la partició %s, se'n perdran totes les dades"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "S'estŕ formatant"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "S'estŕ formatant el fitxer de loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "S'estŕ formatant la partició %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "l'mkraid ha fallit"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolució: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositiu: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lletra d'unitat del DOS: %s (només és una suposició)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipus: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nom: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inici: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Mida: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectors"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindre %d a cilindre %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Sense formatar\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Muntat\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Fitxer(s) de loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"La partició s'ha arrencat per defecte\n"
-" (per a l'arrencada de l'MS-DOS, no per a LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivell %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Mida del tros %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discs RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom del fitxer de loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"És possible que aquesta partició sigui\n"
-"una partició de programa de control;\n"
-"és millor que no la toqueu.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Aquesta partició Bootstrap\n"
-"especial és per arrencar\n"
-"el vostre sistema en dual.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Mida: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindres, %s capçals, %s sectors\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informació: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discs LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipus de taula de particions: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "al bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcions: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipus de sistema de fitxers: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Aquesta contrasenya és massa senzilla (ha de tenir com a mínim %d carŕcters)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Canvia el tipus de partició"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Si us plau, feu clic a una partició "
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "servidor DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatatge de %s ha fallat"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "no sé com formatar %s amb el tipus %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "s'ha produďt un error en muntar %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "senzill"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No podeu utilitzar el JFS per a particions inferiors a 16 MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No podeu utilitzar el ReiserFS per a particions inferiors a 32 MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Els punts de muntatge han de començar amb una /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ja hi ha una partició amb el punt de muntatge %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No podeu utilitzar un volum lňgic LVM per al punt de muntatge %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Aquest directori s'ha de mantenir dins del sistema de fitxers de root"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necessiteu un sistema de fitxers real (ext2, reiserfs) per a aquest punt de "
-"muntatge\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "No podeu utilitzar un volum lňgic LVM per al punt de muntatge %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "No hi ha prou espai per a l'assignació automŕtica"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "S'ha produďt un error en obrir %s per escriure: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"S'ha produďt un error: no s'han trobat dispositius vŕlids on crear nous "
-"sistemes de fitxers. Si us plau, comproveu el vostre maquinari per trobar el "
-"problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "No teniu cap partició!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aquestes són les particions de Linux existents que s'han detectat a la\n"
-"vostra unitat de disc dur. Podeu conservar les eleccions fetes per "
-"l'assistent,\n"
-"són adequades per a un ús normal. Si les canvieu, heu de definir una "
-"partició\n"
-"root (\"/\"); no escolliu una partició massa petita, o no podreu instalˇlar\n"
-"prou programari. Si voleu emmagatzemar les dades en una altra partició, "
-"també\n"
-"haureu de seleccionar una \"/home\" (només si teniu més d'una partició de\n"
-"Linux).\n"
-"\n"
-"\n"
-"Per a la vostra informació, cada partició estŕ identificada d'aquesta "
-"manera: \"Nom\", \"Capacitat\".\n"
-"\n"
-"\n"
-"\"Nom\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat de disc"
-"\",\n"
-"\"número de la partició\" (per exemple, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i "
-"\"sd\"\n"
-"si és SCSI.\n"
-"\n"
-"\n"
-"\"Número de la unitat de disc\" és sempre una lletra després d'\"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-" * \"a\" significa \"unitat de disc mestre en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"c\" significa \"unitat de disc mestre en el controlador IDE secundari"
-"\",\n"
-"\n"
-" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primŕria de disc"
-"\", una \"b\" significa \"unitat secundŕria de disc\", etc..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ara podeu triar quins serveis voleu que s'iniciďn durant l'arrencada.\n"
-"\n"
-"\n"
-"Quan el ratolí passi sobre un element apareixerŕ un petit globus d'ajuda "
-"que\n"
-"explica la finalitat del servei.\n"
-"\n"
-"\n"
-"Aneu especialment amb cura en aquest pas si penseu utilitzar l'ordinador "
-"com\n"
-"a servidor: segurament no us interessarŕ iniciar serveis que no necessiteu.\n"
-"Recordeu que hi ha diversos serveis que poden ser perillosos si s'habiliten\n"
-"en un servidor.\n"
-"En general, seleccioneu només els serveis que realment necessiteu."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Ara és quan heu de decidir en quin lloc del vostre disc dur voleu "
-"instalˇlar\n"
-"el sistema operatiu Mandrake Linux. Si el disc és buit, o si un sistema\n"
-"operatiu existent n'utilitza tot l'espai disponible, us caldrŕ particionar-\n"
-"lo. Bŕsicament, particionar un disc dur consisteix en dividir-lo de manera\n"
-"lňgica per crear espai on instalˇlar el nou sistema Mandrake Linux.\n"
-"\n"
-"\n"
-"Atčs que els efectes d'aquest procés solen ser irreversibles, el "
-"particionament \n"
-"us pot espantar si sou un usuari sense experičncia.\n"
-"Aquest assistent simplifica aquest procés; abans de començar, consulteu el\n"
-"manual i preneu-vos el temps que calgui.\n"
-"\n"
-"\n"
-"Necessiteu, com a mínim, dues particions, una per al sistema operatiu en\n"
-"si i l'altra per a la memňria virtual (anomenada també \"Intercanvi\").\n"
-"\n"
-"\n"
-"Si les particions ja s'han definit (en una instalˇlació anterior o "
-"mitjançant\n"
-"una altra eina de particionament), només caldrŕ que seleccioneu les que "
-"voleu\n"
-"utilitzar per instalˇlar el sistema Linux.\n"
-"\n"
-"\n"
-"Si les particions encara no s'han definit, les heu de crear.\n"
-"Per fer-ho, utilitzeu l'assistent que trobareu més amunt; segons la\n"
-"configuració del vostre disc dur, hi ha diverses solucions possibles:\n"
-"\n"
-"* Utilitzar una partició existent: l'assistent ha detectat al vostre\n"
-"disc dur una o més particions de Linux existents. Si voleu conservar-les,\n"
-"escolliu aquesta opció.\n"
-"\n"
-"\n"
-"* Esborrar completament el disc: si voleu suprimir totes les dades i\n"
-"particions que teniu al disc dur i substituir-les pel sistema Linux-\n"
-"Mandrake, podeu escollir aquesta opció. Aneu amb compte, perň, perquč,\n"
-"un cop la confirmeu, no podreu fer-vos enrere.\n"
-"\n"
-"\n"
-"* Utilitzar l'espai lliure de la partició del Windows: si teniu el "
-"Microsoft\n"
-"Windows instalˇlat al disc dur i n'ocupa tot l'espai diponible, us hi "
-"caldrŕ\n"
-"crear espai lliure per a les dades del Linux. Per fer-ho, podeu suprimir la\n"
-"partició i les dades del Windows (consulteu les opcions \"Esborrar "
-"completament\n"
-"el disc\" o \"Mode expert\") o canviar la mida de la partició del Windows;\n"
-"aquest canvi de mida es pot dur a terme sense cap pčrdua de dades. Aquesta\n"
-"opció és la més recomanable si voleu utilitzar tant el Mandrake Linux com "
-"el\n"
-"Microsoft Windows al mateix ordinador.\n"
-"\n"
-"\n"
-" Abans de decidir-vos per aquesta opció, tingueu en compte que la mida\n"
-"de la partició del Microsoft Windows serŕ més petita que ara. Aixň "
-"significa\n"
-"que tindreu menys espai lliure per emmagatzemar-hi dades o instalˇlar-hi "
-"més\n"
-"programari.\n"
-"\n"
-"\n"
-"* Mode expert: si voleu particionar el disc dur manualment, podeu triar\n"
-"aquesta opció. Aneu amb compte, perquč és molt potent perň també perillosa;\n"
-"podeu perdre fŕcilment totes les dades. Per tant, no trieu aquesta opció "
-"tret\n"
-"que sapigueu exactament quč esteu fent."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Les particions que s'acaben de definir s'han de formatar per poder-les\n"
-"utilitzar. El formatatge consisteix en crear-hi un sistema de fitxers).\n"
-"\n"
-"\n"
-"En aquest punt, potser voldreu tornar a formatar algunes de les particions\n"
-"existents per eliminar les dades que contenen. Si és així, seleccioneu les\n"
-"particions que voleu formatar.\n"
-"\n"
-"\n"
-"Tingueu en compte que no cal tornar a formatar totes les particions que ja\n"
-"existien; heu de tornar a formatar les particions que contenen el sistema\n"
-"operatiu (com ara \"/\", \"/usr\" o \"/var\"), perň no les que contenen "
-"dades\n"
-"que voleu conservar (habitualment, /home).\n"
-"\n"
-"\n"
-"Aneu amb compte en seleccionar les particions; després del formatatge, "
-"totes\n"
-"les dades s'hauran suprimit i no en podreu recuperar cap.\n"
-"\n"
-"\n"
-"Feu clic a \"D'acord\" quan estigueu a punt per formatar les particions.\n"
-"\n"
-"\n"
-"Feu clic a \"Cancelˇla\" si voleu seleccionar altres particions per "
-"instalˇlar\n"
-"el nou sistema Mandrake Linux."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"El nou sistema operatiu Mandrake Linux s'estŕ instalˇlant. Aquesta\n"
-"operació trigarŕ uns quants minuts (dependrŕ de la mida total que\n"
-"hagueu escollit instalˇlar i de la velocitat del vostre ordinador).\n"
-"\n"
-"Si us plau, tingueu pacičncia."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ara és quan heu de decidir quina(es) partició(ns) voleu utilitzar per\n"
-"instalˇlar el sistems Mandrake Linux. Si ja s'han definit les particions "
-"(amb\n"
-"una instalˇlació anterior de GNU/Linux o mitjançant una altra eina de\n"
-"particionament), podeu utilitzar les particiones existents. En cas "
-"contrari,\n"
-"s'han de definir particions al disc dur.\n"
-"\n"
-"\n"
-"Per crear particions, primer heu de seleccionar un disc dur. Podeu "
-"seleccionar\n"
-"el disc que s'ha de particionar fent clic a \"hda\" per a la primera unitat\n"
-"IDE, \"hdb\" per a la segona o \"sda\" per a la primera unitat SCSI, etc.\n"
-"\n"
-"\n"
-"Per particionar el disc dur seleccionat, podeu utilitzar aquestes opcions:\n"
-"\n"
-" * Buidar-ho tot: aquesta opció suprimeix totes les particions que hi ha\n"
-"al disc dur seleccionat.\n"
-"\n"
-"\n"
-" * Assignació automŕtica: aquesta opció us permet crear automŕticament "
-"les\n"
-"particions Ext2 i Intercanvi en l'espai lliure del disc dur.\n"
-"\n"
-"\n"
-" * Rescatar la taula de particions: si la taula de particions estŕ\n"
-"malmesa, podeu intentar recuperar-la mitjançant aquesta opció. Aneu\n"
-"amb compte i penseu que aixň pot fallar.\n"
-"\n"
-"\n"
-" * Desfer: podeu utilitzar aquesta opció per anulˇlar els canvis.\n"
-"\n"
-"\n"
-" * Tornar a carregar: podeu utilitzar aquesta opció si voleu desfer\n"
-"tots els canvis i carregar la taula de particions inicial.\n"
-"\n"
-"\n"
-" * Assistent: Si voleu utilitzar un assistent per particionar el disc "
-"dur,\n"
-"podeu utilitzar aquesta opció, que és la més recomanable si no teniu massa\n"
-"experičncia en particionament.\n"
-"\n"
-"\n"
-" * Restaurar des de disquet: si, en una instalˇlació anterior, vau desar\n"
-"la taula de particions en un disquet, podeu recuperar-la mitjançant aquesta\n"
-"opció.\n"
-"\n"
-"\n"
-" * Desar en disquet: si voleu desar la taula de particions en un disquet\n"
-"per poder-la recuperar, podeu utilitzar aquesta opció. És molt recomanable\n"
-"que l'utilitzeu.\n"
-"\n"
-"\n"
-" * Fet: quan hagueu acabat de particionar el disc dur, utilizeu aquesta\n"
-"opció per desar els canvis.\n"
-"\n"
-"\n"
-"Per a la vostra informació, podeu accedir a qualsevol opció mitjançant el "
-"teclat:\n"
-"moveu-vos per les particions amb la tecles Tab i Fletxa amunt/Fletxa avall.\n"
-"\n"
-"\n"
-"Quan s'ha seleccionat una partició, podeu utilitzar:\n"
-"\n"
-" * Ctrl+C per crear una nova partició (quan se n'ha seleccionat\n"
-"una de buida)\n"
-"\n"
-" * Ctrl+D per suprimir una partició\n"
-"\n"
-" * Ctrl+M per definir el punt de muntatge\n"
-" \n"
-"\n"
-" \n"
-"Si esteu fent la instalˇlació en un ordinador PPC, potser voldreu crear una\n"
-"petita partició 'bootstrap' HFS d'un mínim d'1 MB per a ús del carregador\n"
-"d'arrencada 'yaboot'. Si decidiu fer-la una mica més gran, per exemple de\n"
-"50 MB, us serŕ d'utilitat per emmagatzemar un nucli de recanvi i una imatge\n"
-"del disc RAM per a situacions d'emergčncia durant l'arrencada."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"S'ha detectat més d'una partició de Microsoft Windows en la unitat de disc.\n"
-"Si us plau, trieu quina d'elles voleu redimensionar per instalˇlar el nou\n"
-"sistema operatiu Mandrake Linux.\n"
-"\n"
-"\n"
-"Per a la vostra informació, cada partició estŕ identificada d'aquesta "
-"manera; \"Nom Linux\", \"Nom\n"
-"Windows\" \"Capacitat\".\n"
-"\n"
-"\"Nom Linux\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat de "
-"disc\",\n"
-"\"número de la partició\" (per exemple, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i "
-"\"sd\"\n"
-"si és SCSI.\n"
-"\n"
-"\n"
-"\"Número de la unitat de disc\" és sempre una lletra després d'\"hd\" o \"sd"
-"\".\n"
-"Amb unitats de disc IDE:\n"
-"\n"
-" * \"a\" significa \"unitat de disc mestre en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"c\" significa \"unitat de disc mestre en el controlador IDE secundari"
-"\",\n"
-"\n"
-" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"unitat primŕria de disc"
-"\", una \"b\" significa \"unitat secundŕria de disc\", etc...\n"
-"\n"
-"\"Nom Windows\" és la lletra de la vostra unitat de disc sota Windows (el "
-"primer disc o partició s'anomena \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-"Si us plau, tingueu pacičncia. Aquesta operació pot trigar diversos minuts."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Escolliu \"Instalˇlació\" si no teniu cap versió anterior de Mandrake Linux\n"
-"instalˇlada a l'ordinador o si voleu utilitzar diversos sistemes operatius.\n"
-"\n"
-"\n"
-"Escolliu \"Actualització\" si voleu actualitzar un versió de Mandrake Linux "
-"que ja estŕ instalˇlada.\n"
-"\n"
-"\n"
-"Segons els vostres coneixements de GNU/Linux, podeu escollir un dels "
-"nivells\n"
-"següents d'instalˇlació o actualització del sistema operatiu Mandrake "
-"Linux:\n"
-"\n"
-"* Recomanada: si mai no heu instalˇlat un sistema operatiu GNU/Linux,\n"
-"escolliu aquest. La instalˇlació serŕ molt fŕcil i només se us faran\n"
-"unes poques preguntes.\n"
-"\n"
-"\n"
-"* Personalitzada: si coneixeu prou el GNU/Linux, podeu escollir l'ús\n"
-"principal (estació de treball, servidor, desenvolupament) del vostre\n"
-"sistema. Haureu de respondre més preguntes que en la instalˇlació\n"
-"\"Recomanada\", de manera que, si escolliu aquest tipus d'instalˇlació,\n"
-"haureu de saber com funciona el GNU/Linux.\n"
-"\n"
-"\n"
-"* Per a experts: si domineu el GNU/Linux, trieu aquest tipus\n"
-"d'instalˇlació. Com en el cas de la instalˇlació \"Personalitzada\"\n"
-"podreu escollir l'ús principal del vostre ordinador (estació de treball,\n"
-"servidor, desenvolupament). Aneu amb molt de compte abans de triar aquest\n"
-"tipus d'instalˇlació; podreu realitzar una instalˇlació altament\n"
-"personalitzada.\n"
-" La resposta a algunes preguntes pot ser molt difícil si no teniu sňlids\n"
-"coneixements de GNU/Linux. Per tant, no escolliu aquest tipus "
-"d'instalˇlació\n"
-"tret que sapigueu quč esteu fent."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Si us plau, seleccioneu el port correcte. Per exemple, el port COM1 en MS\n"
-"Windows s'anomena ttyS0 en GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"El LILO (Linux Loader, carregador de Linux) i el Grub són carregadors\n"
-"d'arrencada: poden arrencar el GNU/Linux o qualsevol altre sistema operatiu\n"
-"que tingueu a l'ordinador. Normalment, aquests altres sistemes operatius\n"
-"es detecten i instalˇlen correctament, perň si no és així, podeu afegir-los\n"
-"manualment en aquesta pantalla. Aneu amb compte de triar els parŕmetres\n"
-"correctes.\n"
-"\n"
-"\n"
-"També és possible que no volgueu donar accés a tothom a aquests sistemes\n"
-"operatius; en aquest cas podeu suprimir les entrades corresponents, perň\n"
-"aleshores us caldrŕ un disc d'arrencada per poder-los arrencar!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Heu d'indicar on voleu situar la informació necessŕria per\n"
-"arrencar el GNU/Linux.\n"
-"\n"
-"\n"
-"Tret que sabeu exactament quč esteu fent, escolliu \"Primer sector\n"
-"de la unitat (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"El DrakX intentarŕ trobar el(s) adaptador(s) SCSI PCI. \n"
-"Si en troba, i sap quin programa de control utilitzar, el(s)\n"
-"instalˇlarŕ automŕticament.\n"
-"\n"
-"\n"
-"Si no teniu cap adaptador SCSI, un adaptador SCSI ISA, o un\n"
-"adaptador SCSI PCI que el DrakX no reconegui, se us demanarŕ si teniu\n"
-"un adaptador SCSI al sistema. Si no en teniu cap, simplement feu clic a \"No"
-"\". Si feu\n"
-"clic a \"Sí\", apareixerŕ una llista de programes de control on podreu\n"
-"seleccionar l'adaptador concret.\n"
-"\n"
-"\n"
-"Si heu hagut de seleccionar l'adaptador manualment, el DrakX us preguntarŕ\n"
-"si voleu indicar opcions per a ell. Convé que deixeu que el DrakX comprovi\n"
-"el maquinari per a les opcions; aixň sol funcionar bé.\n"
-"\n"
-"\n"
-"Si no, us caldrŕ proporcionar les opcions al programa de control. Consulteu\n"
-"el capítol 3 de la Guia de l'usuari, secció \"Informació obtinguda del\n"
-"maquinari\" per saber com treure aquesta informació de la documentació del\n"
-"maquinari, del lloc web del fabricant (si teniu accés a Internet) o del\n"
-"Microsoft Windows (si el teniu al sistema)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Podeu afegir entrades addicionals per al yaboot, ja sigui per a altres\n"
-"sistemes operatius, nuclis alternatius, o per a una imatge per a arrencades\n"
-"d'emergčncia.\n"
-"\n"
-"\n"
-"Per a altres OS, l'entrada només consta d'una etiqueta i de la partició "
-"arrel.\n"
-"\n"
-"\n"
-"Per al Linux, hi ha algunes opcions possibles: \n"
-"\n"
-"\n"
-" - Label: és només el nom a indicar a l'indicador del yaboot per\n"
-"seleccionar aquesta opció d'arrencada.\n"
-"\n"
-"\n"
-" - Image: el nom del nucli a arrencar. Normalment, vmlinux o una\n"
-"variació de vmlinux amb una extensió.\n"
-"\n"
-"\n"
-" - Rool: el dispositiu arrel o '/' per a la instalˇlació del Linux.\n"
-"\n"
-"\n"
-" \n"
-" - Append: en maquinari Apple, l'opció d'addició de nuclis s'utilitza\n"
-"força sovint per auxiliar en la inicialització de maquinari de vídeo o per\n"
-"habilitar l'emulació del botó del ratolí de teclat per als 2n i 3r botons,\n"
-"que sovint no existeixen, d'un ratolí Apple convencional. Alguns exemples\n"
-"d'aixň són:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-" - Initrd: aquesta opció es pot utilitzar per carregar els mňduls "
-"inicials,\n"
-"abans que el dispostiu d'arrencada estigui disponible, o per tornar a "
-"carregar\n"
-"una imatge de disc RAM en una situació d'arrencada d'emergčncia.\n"
-"\n"
-"\n"
-" - Initrd-size: la mida per defecte del disc RAM sol ser de 4.096 bytes. Si "
-"necessiteu assignar un disc RAM gran, podeu utilitzar aquesta opció.\n"
-"\n"
-"\n"
-" - Read-write: normalment, la partició 'root' es tracta inicialment com "
-"només de lectura per permetre una comprovació del sistema de fitxers abans "
-"que el sistema esdevingui 'viu'; podeu substituir aquesta opció aquí.\n"
-"\n"
-"\n"
-" - NoVideo: en cas que el maquinari de vídeo de Apple resulti sigui\n"
-"especialment problemŕtic, podeu seleccionar aquesta opció per arrencar\n"
-"en mode 'no-vídeo', amb el suport nadiu per a memňria intermčdia de marcs.\n"
-"\n"
-"\n"
-" - Default: selecciona aquesta entrada com a selecció per defecte del\n"
-"Linux; se selecciona prement simplement Retorn a l'indicador del yaboot.\n"
-"Aquesta opció també es ressaltarŕ amb un '*' si premeu Tab per veure les\n"
-"seleccions d'arrencada."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"El Yaboot és un carregador d'arrencada per a maquinari NewWorld MacIntosh.\n"
-"Pot arrencar tant el GNU/Linux com el MacOS o el MacOSX, si és que els "
-"teniu\n"
-"a l'ordinador. Normalment, aquests altres sistemes operatius es detecten i\n"
-"instalˇlen correctament; si no és així, perň, en aquesta pantalla podeu\n"
-"afegir una entrada manualment. Aneu amb compte de triar els parŕmetres\n"
-"correctes.\n"
-"\n"
-"\n"
-"Les opcions principals del Yaboot són:\n"
-"\n"
-"\n"
-" - Missatge d'inicialització: un senzill missatge de text que apareix "
-"abans\n"
-"de l'indicador d'arrencada.\n"
-"\n"
-"\n"
-" - Dispositiu d'arrencada: indica on voleu situar la informació necessŕria\n"
-"per arrencar el GNU/Linux. Normalment, haureu configurat abans una partició\n"
-"bootstrap que contindrŕ aquesta informació.\n"
-"\n"
-"\n"
-" - Demora de l'Open Firmware: a diferčncia del LILO, amb el Yaboot hi ha\n"
-"dues demores disponibles. La primera d'elles es mesura en segons i, en "
-"aquest\n"
-"punt, podeu triar entre CD, arrencada OF, MacOS o Linux.\n"
-"\n"
-"\n"
-" - Temps mŕxim d'arrencada del nucli: aquest temps mŕxim és similar a la "
-"demora d'arrencada del LILO. Després de seleccionar el Linux tindreu aquesta "
-"demora en 0,1 segons abans que se seleccioni la descripció per defecte del "
-"nucli.\n"
-"\n"
-"\n"
-" - Habilitar l'arrencada des de CD?: si activeu aquesta opció podreu triar\n"
-"'C' per a CD al primer indicador de l'arrencada.\n"
-"\n"
-"\n"
-" - Habilitar l'arrencada OF?: si activeu aquesta opció podreu triar 'N' "
-"per\n"
-"Open Firmware al primer indicador de l'arrencada.\n"
-"\n"
-"\n"
-" - OS per defecte: podeu seleccionar amb quin OS, per defecte, s'arrencarŕ\n"
-"quan la demora de l'Open Firmware venci."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Escolliu el disc dur que voleu buidar per instalˇlar la nova partició "
-"Linux-\n"
-"Mandrake. Aneu amb compte, se'n perdran totes les dades i no es podran "
-"recuperar."
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Feu clic a \"D'acord\" si voleu suprimir totes les dades i\n"
-"particions que hi ha en aquesta unitat de disc. Aneu amb compte, perquč, un "
-"cop hagueu fet clic a \"D'acord\", no podreu recuperar cap dada ni partició "
-"del disc,\n"
-"incloent las dades de Windows.\n"
-"\n"
-"\n"
-"Feu clic a \"Cancelˇla\" per anulˇlar aquesta operació sense perdre cap "
-"dada\n"
-"ni partició d'aquest disc."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "No es pot utilitzar l'emissió sense un domini NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inseriu un disquet formatat amb FAT a la unitat %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Aquest disquet no estŕ formatat en FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Per utilitzar aquesta selecció de paquets desada, arrenqueu la instalˇlació "
-"amb ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "S'ha produďt un error en llegir el fitxer %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Part del maquinari del vostre ordinador necessita programes de control\n"
-"``registrats'' per poder funcionar. En podeu trobar informació a: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Heu de tenir una partició arrel.\n"
-"Per fer-ho, creeu una partició (o feu clic a una d'existent).\n"
-"Després, trieu l'acció ``Punt de muntatge'' i doneu-li el valor '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Heu de tenir una partició d'intercanvi"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"No teniu cap partició d'intercanvi\n"
-"\n"
-"Voleu continuar igualment?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Heu de tenir una partició d'intercanvi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Utilitza l'espai lliure"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Utilitza la partició existent"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "No existeix cap partició per utilitzar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Utilitza la particio Windows per al loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quina partició voleu utilitzar per al Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolliu les mides"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Mida de la partició arrel en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Mida de la partició d'intercanvi en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Utilitza l'espai lliure de la partició de Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "A quina partició voleu canviar la mida?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "S'estan calculant els límits del sistema de fitxers de Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"El redimensionador de la FAT no pot gestionar la vostra partició, \n"
-"s'ha produďt l'error següent: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"La partició de Windows estŕ massa fragmentada; si us plau, executeu "
-"``defrag'' primer"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENCIÓ!\n"
-"\n"
-"Ara, el DrakX canviarŕ la mida de la vostra partició de Windows. Aneu amb\n"
-"compte: aquesta operació és perillosa. Si encara no ho heu fet, sortiu de "
-"la\n"
-"instalˇlació, executeu l'Scandisk sota Windows (i potser també el Defrag), "
-"i\n"
-"torneu a començar la instalˇlació. Feu també una cňpia de seguretat de les\n"
-"vostres dades.\n"
-"Quan estigueu segur, premeu D'acord."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quina mida voleu deixar per a la partició de Windows?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partició %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ha fallat la redimensió de la FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"No hi ha particions FAT a quč canviar la mida o per utilitzar-les com a "
-"loopback (o no queda prou espai)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Esborra el disc complet"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Elimina el Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teniu més d'un disc dur; en quin voleu instalˇlar el Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Es perdran TOTES les particions, i les dades que contenen, de la unitat %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionament personalitzat de disc"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Utilitza l'fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ara podeu fer les particions a %s.\n"
-"Quan acabeu, no oblideu desar-les utiltzant `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "No teniu prou espai lliure a la partició de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "No puc trobar espai per a la instalˇlació"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'assistent de particionament del DrakX ha trobat les solucions següents:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ha fallat el particionament: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "S'estŕ activant la xarxa"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "S'estŕ desactivant la xarxa"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"S'ha produďt un error, perň no sé com gestionar-lo correctament.\n"
-"Si continueu, és sota la vostra responsabilitat."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplica el punt de muntatge %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns paquets importants no s'han instalˇlat correctament.\n"
-"La vostra unitat de CD-ROM, o bé el CD-ROM, són defectuosos.\n"
-"Comproveu el CD-ROM en un ordinador instalˇlat mitjançant \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvingut a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "S'estŕ introduint el pas `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"El vostre sistema estŕ baix de recursos; podeu tenir algun problema en\n"
-"instalˇlar el Mandrake Linux. Si aixň passa, podeu provar d'instalˇlar-lo "
-"en\n"
-"mode text. Per fer-ho, premeu `F1' en arrencar des del CD-ROM i escriviu "
-"`text'"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Tipus d'instalˇlació"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Si us plau, trieu un dels tipus d'instalˇlació següents:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La mida total dels grups que heu seleccionat es d'aproximadament %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si no voleu instalˇlar tants MB, seleccioneu el percentatge de paquets\n"
-"que voleu instalˇlar.\n"
-"\n"
-"Un percentatge baix instalˇlarŕ només els paquets més importants;\n"
-"un percentatge del 100%% instalˇlarŕ tots els paquets seleccionats."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Només teniu prou espai al disc per a %d%% d'aquests paquets.\n"
-"\n"
-"Si en voleu instalˇlar menys, seleccioneu el percentatge de paquets\n"
-"que voleu instalˇlar.\n"
-"Un percentatge baix instalˇlarŕ només els paquets més importants;\n"
-"un percentatge del %d%% instalˇlarŕ tants paquets com sigui possible."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Podreu fer una elecció més concreta al pas següent"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Percentatge de paquets per instalˇlar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selecció del grup de paquets"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selecció individual de paquets"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Mida total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paquet incorrecte"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nom: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versió: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Mida: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importŕncia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"No podeu seleccionar aquest paquet perquč no queda prou espai per instalˇlar-"
-"lo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ara s'instalˇlaran els paquets següents"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ara s'eliminaran els paquets següents"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "No podeu seleccionar/desseleccionar aquest paquet"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Aquest paquet és obligatori; no es pot deseleccionar"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "No podeu desseleccionar aquest paquet; ja estŕ instalˇlat"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Aquest paquet s'ha d'actualitzar\n"
-"Esteu segur que voleu desseleccionar-lo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No podeu desseleccionar aquest paquet; s'ha d'actualitzar"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostra automŕticament els paquets seleccionats"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalˇla"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Desa al disquet"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Desa la selecció de paquets"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Desinstalˇla"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolliu els paquets que voleu instalˇlar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "S'estŕ instalˇlant"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "S'estŕ estimant"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Temps restant "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Si us plau, espereu, s'estŕ preparant la instalˇlació"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquets"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "S'estŕ instalˇlant el paquet %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepta"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rebutja"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Canvieu el vostre CD-ROM!\n"
-"\n"
-"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i després\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancelˇla per no fer la instalˇlació des d'aquest CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Voleu seguir igualment?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "S'ha produďt un error en ordenar els paquets"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "S'ha produďt un error en instalˇlar els paquets"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Si us plau, llegiu atentament les clŕusules següents. Si no esteu\n"
-"d'acord amb qualsevol d'elles, no esteu autoritzat a instalˇlar\n"
-"els CD següents. Premeu 'Rebutja-ho' per continuar la instalˇlació\n"
-"sense utilitzar aquests CD.\n"
-"\n"
-"\n"
-"Alguns dels components que s'inclouen en aquest CD no estan\n"
-"regits per la llicčncia GPL o acords semblants. Cada un d'aquests\n"
-"components es regeix per les clŕusules i condicions de la seva\n"
-"prňpia llicčncia específica. Si us plau, llegiu atentament i\n"
-"accepteu aquestes llicčncies específiques abans d'utilitzar o\n"
-"redistribuir els components esmentats. En general, aquestes\n"
-"llicčncies impedeixen la transferčncia, duplicació (excepte amb\n"
-"la finalitat de fer-ne cňpies de seguretat), redistribució,\n"
-"enginyeria inversa, deassemblatge, decompilació o modificació del\n"
-"component. Qualsevol violació de l'acord finalitzarŕ immediatament\n"
-"els vostres drets sobre la llicčncia específica. Tret que la\n"
-"llicčncia específica us en garanteixi els drets, normalment no\n"
-"podreu instalˇlar els programes en més d'un sistema, ni adaptar-lo\n"
-"per utilitzar-lo en una xarxa. En cas de dubte, poseu-vos en\n"
-"contacte directament amb el distribuďdor o editor del component.\n"
-"La transferčncia a terceres parts i la cňpia d'aquests components,\n"
-"incloent la documentació, estan normalments prohibides.\n"
-"\n"
-"\n"
-"Tots els drets sobre els components del CD següent pretanyen als\n"
-"seus autors respectius i estan protegits per les lleis de\n"
-"propietat intelˇlectual i de copyright aplicables als programes\n"
-"informŕtics.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "S'ha produďt un error"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Voleu reiniciar la xarxa"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acord de llicčncia"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Introducció\n"
-"\n"
-"D'ara endavant, hom es referirŕ al sistema operatiu i als diferents\n"
-"components disponibles en la distribució Mandrake Linux com als\n"
-"\"Productes de programari\". Els Productes de programari inclouen,\n"
-"perň no estan restringits a, el conjunt de programes, mčtodes, regles\n"
-"i documentació relativa al sistema operatiu i els diferents\n"
-"components de la distribució Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Acord de llicčncia\n"
-"\n"
-"Si us plau, llegiu atentament aquest document. Aquest document és un\n"
-"acord de llicčncia entre la vostra persona i MandrakeSoft S.A., que\n"
-"s'aplica als Productes de programari. Pel fet d'instalˇlar, duplicar\n"
-"o utilitzar els Productes de programari en qualsevol forma esteu\n"
-"acceptant explícitament, i expressant el vostre acord a, avenir-vos a\n"
-"les clŕusules i condicions d'aquesta Llicčncia. Si no esteu d'acord\n"
-"amb qualsevol part de la Llicčncia, no esteu autoritzat a instalˇlar,\n"
-"duplicar o utilitzar els Productes de programari. Qualsevol intent\n"
-"d'instalˇlar, duplicar o utilitzar els Productes de programari en una\n"
-"forma que no s'adapti a les clŕusules i condicions d'aquesta\n"
-"Llicčncia, és nul i finalitzarŕ els vostres drets sobre la mateixa.\n"
-"En finalitzar-se la Llicčncia, heu de destruir immediatament totes\n"
-"les cňpies dels Productes de programari.\n"
-"\n"
-"\n"
-"2. Garantia limitada\n"
-"\n"
-"Els Productes de programari i documentació adjunta es subministren\n"
-"\"tal com són\", sense cap garantia, fins al punt permés per la llei.\n"
-"MandrakeSoft S.A. no serŕ, sota cap circumstŕncia, i fins al punt\n"
-"permés per la llei, responsable de cap dany especial, incidental ni\n"
-"directe (incloent, sense limitar-se a, els danys per pčrdua de\n"
-"negocis, interrupció de negocis, pčrdues financeres, multes i costes\n"
-"judicials, o qualsevol altre dany que resultin d'un judici, o\n"
-"qualsevol altre pčrdua d'importŕncia) que resulti de l'ús o de la\n"
-"impossibilitat d'utilitzar els Productes de programari, fins i tot si\n"
-"MandrakeSoft S.A. ha estat avisat de la possibilitat que\n"
-"s'esdevinguin aquests danys.\n"
-"\n"
-"RESPONSABILITAT LIMITADA RELATIVA A LA POSSESSIÓ O UTILITZACIÓ DE PROGRAMARI "
-"PROHIBIT EN ALGUNS PAĎSOS\n"
-"\n"
-"Fins al punt permés per la llei, MandrakeSoft S.A. o els seus\n"
-"distribuďdors no seran, sota cap circumstŕncia, responsables de cap\n"
-"dany especial, incidental ni directe (incloent, sense limitar-se a,\n"
-"els danys per pčrdua de negocis, interrupció de negocis, pčrdues\n"
-"financeres, multes i costes judicials, o qualsevol altre dany que\n"
-"resultin d'un judici, o qualsevol altre pčrdua d'importŕncia) que\n"
-"resulti de la possessió i utilització dels components de programari o\n"
-"de la seva descŕrrega des d'un dels llocs de Mandrake Linux, que\n"
-"estiguin prohibides o restringides en alguns paďsos per les lleis\n"
-"locals. Aquesta responsabilitat limitada s'aplica, perň no estŕ\n"
-"limitada a, els potents components criptogrŕfics inclosos als\n"
-"Productes de programari.\n"
-"\n"
-"\n"
-"3. la llicčncia GPL i llicčncies relacionades\n"
-"\n"
-"Els Productes de programari consisteixen en components creats per\n"
-"diferents persones o entitats. La majoria d'aquests components es\n"
-"regeixen per les clŕusules i condicions de la Llicčncia General\n"
-"Pública de GNU, a la qual d'ara endavant hom s'hi referirŕ com a\n"
-"\"GPL\", o de llicčncies similars. la majoria d'aquestes llicčncies\n"
-"us permeten duplicar, adaptar o redistribuir els components que\n"
-"cobreixen. Si us plau, llegiu atentament les clŕusules i condicions\n"
-"de l'acord de llicčncia de cada component abans d'utilitzar-lo.\n"
-"Qualsevol pregunta sobre la lllicčncia d'un component s'ha d'adreçar\n"
-"al seu autor i no a MandrakeSoft.\n"
-"Els programes desenvolupats per MandrakeSoft S.A. es regeixen per la\n"
-"llicčncia GPL.La documentació escrita per MandrakeSoft S.A. estŕ regida per "
-"una\n"
-"llicčncia específica; consulteu la documentació per a més\n"
-"informació.\n"
-"\n"
-"\n"
-"4. Drets sobre la propietat intelˇlectual\n"
-"\n"
-"Tots els drets sobre els components dels Productes de programari\n"
-"pertanyen als seus autors respectius i estan protegits per les lleis\n"
-"de propietat intelˇlectual i de copyright aplicables als programes\n"
-"informŕtics.\n"
-"MandrakeSoft S.A. es reserva els drets de modificar o adaptar els\n"
-"Productes de programari, totalment o parcialment, per tots els\n"
-"mitjans i amb totes les finalitats.\n"
-"\"Mandrake\", \"Mandrake Linux\" i els logotips associats son marques\n"
-"registrades de MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Lleis rectores \n"
-"\n"
-"Si qualsevol part d'aquest acord és declarat nul, ilˇlegal o\n"
-"inaplicable per un tribunal, aquesta part s'exclourŕ del contracte.\n"
-"Seguiu obligat, perň, per les altres seccions aplicables de\n"
-"l'acord.\n"
-"Les clŕusules i condicions d'aquesta Llicčncia es regeixen per les\n"
-"lleis de França.\n"
-"Tots els litigis sobre les clŕusules d'aquesta llicčncia es dirimiran\n"
-"preferiblement fora dels tribunals. Com a últim recurs, el litigi es\n"
-"portarŕ als tribunals competents de París, França.\n"
-"Per a qualsevol tema relacionat amb aquest document, poseu-vos en\n"
-"contacte amb MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclat"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Si us plau, selecioneu la disposició del vostre teclat."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Aquesta és la llista completa de teclats disponibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Quin tipus d'instalˇlació voleu?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalˇla/Actualitza"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Es tracta d'una instalˇlació o d'una actualització?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomanada"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualitza"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Desa la selecció de paquets"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port del ratolí"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sčrie a quč estŕ connectat el vostre ratolí."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulació dels botons"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulació del botó 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulació del botó 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "S'estan configurant les targetes PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "S'estŕ configurant l'IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "no hi ha particions disponibles"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "S'estan explorant les particions per trobar els punts de muntatge"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Escolliu els punts de muntatge"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"No puc llegir la vostra taula de particions, estŕ massa malmesa per a mi :(\n"
-"Intentaré seguir, buidant les particions incorrectes (es perdran TOTES LES "
-"DADES!).\n"
-"L'altra solució és impedir al DrakX que modifiqui la taula de particions.\n"
-"(l'error és %s)\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"El DiskDrake no ha pogut llegir correctament la taula de particions.\n"
-"Si continueu, és sota la vostra responsabilitat!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "No s'ha trobat cap partició arrel"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partició arrel"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Quina és la partició arrel (/) del vostre sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Us caldrŕ tornar a arrencar per tal que les modificacions de la taula de "
-"particions tinguin efecte"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Escolliu les particions que voleu formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Voleu comprovar els blocs incorrectes?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "S'estan formatant les particions"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "S'estŕ creant i formatant el fitxer %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"No hi ha prou intercanvi per completar la instalˇlació; si us plau, afegiu-ne"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "S'estan cercant els paquets disponibles"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "S'estan cercant els paquets a actualitzar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Al vostre sistema no li queda prou espai per a la instalˇlació o "
-"actualització (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínima (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomanada (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaura des del disquet"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaura des del disquet"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Selecció del grup de paquets"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Desa al disquet"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Escolliu el paquet a instalˇlar"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Espera"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si teniu tots els CD de la llista inferior, feu clic a D'acord.\n"
-"Si no teniu cap d'aquests CD, feu clic a Cancelˇla.\n"
-"Si només falten alguns CD, desseleccioneu-los i feu clic a D'acord."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetat com \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "S'estŕ preparant la instalˇlació"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"S'estŕ instalˇlant el paquet %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Publica la configuració de la instalˇlació "
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ara teniu la possibilitat de descarregar programari destinat al xifratge.\n"
-"\n"
-"AVÍS:\n"
-"Degut a diversos requeriments generals aplicables a aquest programari, i\n"
-"imposats per diverses jurisdiccions, el client i/o l'usuari final d'aquest\n"
-"programari s'ha(n) d'assegurar que les lleis de la(es) seva(es)\n"
-"jurisdicció(ns) li(els) permeten descarregar-lo, emmagatzemar-lo i/o\n"
-"utilitzar-lo.\n"
-"\n"
-"A mes, el client i/o l'usuari final ha(n) de tenir especialment en compte\n"
-"que no ha(n) d'infrigir les lleis de la(es) seva(es) jurisdicció(ns). Si\n"
-"el client i/o l'usuari final no respecta(en) les disposicions d'aquestes\n"
-"lleis, pot(den) ser severament sancionat(s).\n"
-"\n"
-"Mandrakesoft i els seus fabricants i/o proveďdors no seran en cap cas\n"
-"responsables de cap dany especial, indirecte o incidental (incloent,\n"
-"perň sense limitar-se a, la pčrdua de beneficis, interrupció del negoci,\n"
-"pčrdua de dades comercials i altres pčrdues econňmiques, i eventuals\n"
-"responsabilitats i idemnitzacions que s'hagin de pagar per sentčncia\n"
-"judicial) derivat de l'ús, la possessió o la simple descŕrrega d'aquest\n"
-"programari, al qual el client i/o l'usuari final pugui(n), eventualment,\n"
-"tenir accés després d'haver signat el present acord.\n"
-"\n"
-"Per a qualsevol consulta relativa a aquest acord, podeu adreçar-vos a \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"S'estŕ contactant amb el mirror per obtenir la llista dels paquets "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolliu un mirror al qual aconseguir els paquets"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"S'estŕ contactant amb el mirror per obtenir la llista dels paquets "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "En quina zona horŕria us trobeu?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "El rellotge del vostre ordinador estŕ regulat a GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Cap impressora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "En teniu una altra?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resum"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Ratolí"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zona horŕria"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impressora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Targeta XDSI"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Targeta de so"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Targeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Utilitza el NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impressora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contrasenya de 'root'"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Sense contrasenya"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Aquesta contrasenya és massa senzilla (ha de tenir com a mínim %d carŕcters)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticació"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticació"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS d'autenticació"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domini del NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Aixň és "
-"útil\n"
-"si no voleu instalˇlar el SILO al sistema, o si un altre sistema operatiu\n"
-"elimina el SILO, o si el SILO no funciona amb la vostra configuració de\n"
-"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
-"serioses del sistema.\n"
-"\n"
-"Si voleu crear un disc d'arrencada per al vostre sistema, inseriu un disquet "
-"a la primera unitat i premeu \"D'acord\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primera unitat de disquet"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segona unitat de disquet"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Omet"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disc d'arrencada personalitzat proporciona una manera d'arrencar el "
-"vostre\n"
-"sistema Linux sense dependre del carregador d'arrencada normal. Aixň és "
-"útil\n"
-"si no voleu instalˇlar el LILO (o el grub) al sistema, o si un altre sistema "
-"operatiu\n"
-"elimina el LILO, o si el LILO no funciona amb la vostra configuració de\n"
-"maquinari. Un disc d'arrencada personalitzat també es pot utilitzar amb la\n"
-"imatge de rescat del Mandrake, facilitant molt la recuperació de fallides\n"
-"serioses del sistema. Voleu crear un disc d'arrencada per al vostre "
-"sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "No hi ha cap unitat de disquet disponible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Escolliu la unitat de disquet que voleu utilitzar per crear el disc "
-"d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inseriu un disquet a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "S'estŕ creant el disc d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "S'estŕ preparant el carregador d'arrencada"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Voleu utilitzar l'aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"S'ha produďt un error en instalˇlar l'aboot; \n"
-"voleu intentar igualment la instalˇlació encara que aixň destrueixi la "
-"primera partició?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalˇla el LILO"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ha fallat la instalˇlació del carregador d'arrencada. S'ha produďt l'error "
-"següent:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Potser us caldrŕ canviar el dispositiu d'arrencada Open Firware per\n"
-" habilitar el carregador d'arencada. Si no veieu l'indicador del\n"
-" carregador d'arrencada en tornar a arrencar, premeu Command-Option-O-F\n"
-" en tornar a arrencar i introduďu:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Després, escriviu: shut-down\n"
-"En l'arrencada següent heu de veure l'indicador del carregador d'arrencada."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "S'estŕ creant el diquet d'instalˇlació automŕtica"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos no s'han completat.\n"
-"\n"
-"Segur que voleu sortir ara?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicitats! La instalˇlació ha acabat.\n"
-"Traieu el suport d'arrencada i premeu Intro per tornar a arrencar.\n"
-"\n"
-"\n"
-"Trobareu la solució als problemes coneguts d'aquesta versió del\n"
-"Mandrake Linux a la fe d'errates que hi ha a \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"La informació sobre com configurar el vostre sistema estŕ disponible a\n"
-"l'últim capítol d'instalˇlació de la Guia Oficial de l'Usuari del\n"
-"Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Genera un disquet per a la instalˇlació automŕtica"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Si es desitja, la instalˇlació automŕtica es pot\n"
-"automatitzar completament, perň en aquest cas\n"
-"prendrŕ el control del disc dur!!\n"
-"(aixň estŕ pensat per a la instalˇlació en una altra caixa).\n"
-"\n"
-"Potser preferireu repetir la instalˇlació.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automŕtica"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Repeteix"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Desa la selecció de paquets"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalˇlació del Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> entre elements | <Espai> selecciona | <F12> pant. següent"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "El kdesu no hi és"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Trieu una acció"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avançat"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Si us plau, espereu"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informació"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandeix l'arbre"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Redueix l'arbre"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Commuta entre pla i ordenat per grups"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Elecció incorrecta, torneu-ho a intentar\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "La vostra elecció? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "La vostra elecció? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcions: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Voleu utilitzar l'aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "La vostra elecció? (predeterminat %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Txec (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alemany"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanyol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finčs"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francčs"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruec"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polončs"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rus"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Suec"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Teclat RU"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Teclat EU"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniŕ"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeni (antic)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeni (mŕquina d'escriure)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeni (fončtic)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjančs (llatí)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armeni (fončtic)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Búlgar"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiler (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorús"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Suís (disposició alemanya)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Suís (disposició francesa)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Txec (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alemany (sense tecles inoperatives)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dančs"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (EU)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruec)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (EU)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estoniŕ"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiŕ (disposició \"russa\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiŕ (disposició \"llatina\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grec"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hongarčs"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israeliŕ"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israeliŕ (fončtic)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniŕ"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandčs"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiŕ"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japončs de 106 tecles"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Teclat coreŕ"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Espanyol sud-americŕ"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituŕ AZERTY (antic)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituŕ AZERTY (nou)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituŕ \"fila de números\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituŕ \"fončtic\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Ubicació"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedoni"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandčs"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polončs (disposició qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polončs (disposició qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugučs"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadenc (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rus (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Eslovč"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovac (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovac (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjančs (cirílˇlic)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Taula"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclat tai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclat tai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turc (tradicional, model \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turc (modern, model \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraďnčs"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Teclat EU (internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"fila numčrica\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslau (llatí/cirílˇlic)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntatges circulars %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Elimineu primer els volums lňgics\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rató de bola PS2 genčric"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botó"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "General"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "De bola"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "sčrie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generic 3 Button Mouse"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sčrie, tipus C7 antic)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botons"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botons"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "cap"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Cap ratolí"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Si us plau, comproveu el ratolí."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Per activar el ratolí,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVEU LA BOLA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finčs"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Següent ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Aixň és correcte?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connecta't a internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La manera més habitual de connectar amb ADSL és pppoe.\n"
-"Algunes connexions utilitzen pptp, unes poques utilitzen dhcp.\n"
-"Si no ho sabeu, escolliu 'utilitza pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "utilitza dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "utilitza pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "utilitza pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quin client dhcp voleu utilitzar?\n"
-"El predeterminat és dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema.\n"
-"No puc configurar aquest tipus de connexió."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolliu la interfície de xarxa"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
-"connectar-vos a Internet."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "no s'ha trobat cap targeta de xarxa"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "S'estŕ configurant la xarxa"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Si us plau, introduďu el nom del vostre ordinador central, si el sabeu.\n"
-"Alguns servidors DHCP necessiten que aquest nom funcioni.\n"
-"El nom ha de ser complet,\n"
-"com ara ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nom de l'ordinador central"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Assistent de configuració de xarxa"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Mňdem XDSI extern"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Targeta XDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Quin tipus de connexió XDSI teniu?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "S'ha detectat la configuració del sistema de tallafocs!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "S'ha detectat la configuració del sistema de tallafocs!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuració de l'XDSI"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccioneu el vostre proveďdor.\n"
-" Si no és a la llista, seleccioneu No és a la llista"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocol d'arrencada"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resta del món"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resta del món \n"
-" cap canal D (línies llogades)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Quin protocol voleu utilitzar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Quin tipus de targeta teniu?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "No sé"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si teniu una targeta ISA, els valors de la pantalla següent han de ser "
-"correctes.\n"
-"\n"
-"Si teniu una targeta PCMCIA, us en cal saber l'irq i l'io.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Interromp"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continua"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Quina targeta XDSI teniu ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"He detectat una targeta PCI XDSI, perň no en conec el tipus. Si us plau, "
-"seleccioneu una targeta PCI a la pantalla següent."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No s'ha trobat cap targeta PCI XDSI. Si us plau, seleccioneu-ne una a la "
-"pantalla següent"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sčrie al qual teniu connectat el mňdem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcions de marcatge"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nom de la connexió"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Número de telčfon"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID d'entrada"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Basat en script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Basat en terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nom de domini"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segon servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Ara mateix esteu connectat a Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Podeu connectar-vos a Internet o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Ara mateix no esteu connectat a Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Connecta"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Desconnecta"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configura una connexió per cable"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Connexió i configuració d'Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Podeu desconnectar-vos o tornar a configurar la connexió."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuració de xarxa"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Atčs que esteu realitzant una instalˇlació de xarxa, ja teniu la xarxa "
-"configurada.\n"
-"Feu clic a D'acord per conservar la configuració, o a Cancelˇla per tornar a "
-"configurar la connexió a Internet i xarxa.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Benvingut a l'Auxiliar de configuració a xarxa\n"
-"\n"
-"Ara configurarem la connexió a Internet/xarxa.\n"
-"Si no voleu utilitzar la detecció automŕtica, desactiveu el quadre de "
-"verificació.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolliu el perfil per configurar"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Utilitza la detecció automŕtica"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "S'estan detectant els dispositius..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Connexió normal per mňdem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectat al port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Connexió XDSI"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "s'ha detectat %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Connexió LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectat a la interfície %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Connexió de cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Connexió de cable"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Connexió LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "s'han detectat una o diverses targetes Ethernet"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Escolliu l'eina que voleu utilitzar "
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Connexió a Internet compartida"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Voleu iniciar la connexió en arrencar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuració de xarxa"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"S'ha produďt un problema en reiniciar la xarxa: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Felicitats, la configuració de xarxa i Internet ha finalitzat.\n"
-"\n"
-"Ara s'aplicarŕ la configuració al sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Després d'aixň, és recomanable que reinicieu l'entorn X per\n"
-"evitar problemes deguts al canvi de nom de l'ordinador central."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATENCIÓ: Aquest dispositiu ja es va configurar per connectar-se a Internet.\n"
-"Només cal que accepteu mantenir-lo configurat.\n"
-"Si modifiqueu els camps inferiors, sobreescriureu aquesta configuració."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Si us plau, introduďu la configuració IP d'aquest ordinador.\n"
-"S'ha d'introduir cada element com a una adreça IP amb notació decimal amb\n"
-"punts (per exemple, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "S'estŕ configurant el dispositiu de xarxa %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (programa de control %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Adreça IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Submŕscara de la xarxa"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automŕtic"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adreça IP ha d'estar amb el format 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Si us plau, introduďu el nom del vostre ordinador central.\n"
-"Aquest nom ha de ser complet, com ara\n"
-"``mybox.mylab.myco.com''.\n"
-"També podeu introduir l'adreça IP de la passarelˇla, si en teniu una"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositiu de la passarelˇla"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuració dels proxys"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "El proxy ha de ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "El proxy ha de ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuració d'Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voleu intentar connectar-vos a Internet ara?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "S'estŕ comprovant la vostra conexió..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ara, el sistema estŕ connectat a Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Per raons de seguretat, ara es desconnectarŕ."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"No sembla que el sistema estigui connectat a Internet.\n"
-"Intenteu tornar a configurar la connexió."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuració de la connexió"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Si us plau, ompliu o marqueu el camp inferior"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Targeta IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Targeta de memňria (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Targeta d'E/S"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Targeta d'E/S_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Targeta d'E/S_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "El vostre telčfon particular"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nom del proveďdor (p.ex. proveidor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Número de telčfon del proveďdor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveďdor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveďdor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escolliu el vostre teclat"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Mode de marcatge"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipus de connexió: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipus de connexió: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Entrada del compte (nom d'usuari)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Contrasenya del compte"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ha fallat el muntatge: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Aquesta plataforma no suporta particions esteses"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hi ha un forat a la vostra taula de particions, perň no puc utilitzar-lo.\n"
-"L'única solució és moure les particions primŕries per fer que el forat quedi "
-"contigu a les particions ampliades"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ha fallat la restauració del fitxer %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "S'ha produďt un error en escriure al fitxer %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Alguna cosa no va bé en la vostra unitat. \n"
-"Ha fallat una comprovació de la integritat de les dades. \n"
-"Aixň vol dir que qualsevol cosa que s'escrigui al disc acabarŕ feta malbé"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ha de tenir"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "molt bonic"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bonic"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "potser"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remot"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora de xarxa (TCP/sňcol)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de la impressora"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impressora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impressora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "S'ha produďt un error en escriure al fitxer %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(mňdul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP del servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Predeterminat)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccioneu la connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Com estŕ connectada la impressora?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Amb un servidor CUPS remot, aquí no us cal configurar cap\n"
-"impressora; les impressores es detectaran automŕticament.\n"
-"En cas de dubte, seleccioneu \"Servidor CUPS remot\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'adreça IP ha d'estar amb el format 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "El número de port ha de ser numčric"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "S'estan detectant els dispositius..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Ports de comprovació"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Utilitza la detecció automŕtica"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "s'ha detectat %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sčrie al qual teniu connectat el mňdem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configuració"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "S'estŕ instalˇlant el paquet %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "S'estŕ instalˇlant el paquet %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "S'estŕ llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "S'estŕ llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcions de la impressora lpd remota"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Per poder utilitzar una cua d'impressió lpd remota, necessiteu proporcionar\n"
-"el nom de l'ordinador central del servidor de la impressora i el nom de la\n"
-"cua d'aquest servidor on s'hi han de situar les tasques."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nom de l'ordinador central remot"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcions de la impressora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Per poder imprimir a una impressora SMB, heu d'indicar el nom de\n"
-"l'ordinador central SMB (tingueu en compte que pot ser diferent del seu nom\n"
-"TCP/IP) i possiblement l'adreça IP del servidor d'impressió, així com el "
-"nom\n"
-"de compartició de la impressora a quč voleu accedir i el nom d'usuari,\n"
-"contrasenya i informació de grup si són necessaris."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Ordinador central del servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nom de compartició"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grup de treball"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcions de la impressora NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Per poder imprimir a una impressora NetWare, heu de proporcionar el nom del\n"
-"servidor d'impressió NetWare (tingueu en compte que pot ser diferent del "
-"nom\n"
-"TCP/IP del seu ordinador central), així com el nom de la cua d'impressió de\n"
-"la impressora a quč voleu accedir i el nom d'usuari i contrasenya si són\n"
-"necessaris."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de la impressora"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nom de la cua d'impressió"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcions de la impressora de sňcol"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Per imprimir a una impressora de sňcol, heu d'indicar el nom de l'ordinador\n"
-"central de la impressora i, opcionalment, el número de port."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Nom de l'ordinador central de la impressora"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Nom de l'ordinador central de la impressora"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Dispositiu URI d'impressora"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nom de la impressora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descripció"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ubicació"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "S'estŕ llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Aixň és correcte?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Quin tipus d'impressora teniu?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuració del mňdem"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuració d'Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Voleu comprovar la impressió?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Ports de comprovació"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Sí, imprimeix ambdues pŕgines de prova"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impressora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Eines estŕndard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "S'esta(n) imprimint la(es) pŕgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "S'esta(n) imprimint la(es) pŕgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "S'esta(n) imprimint la(es) pŕgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "S'esta(n) imprimint la(es) pŕgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(es) pŕgina(es) de prova s'ha(n) enviat al procés d'impressió.\n"
-"Degut a aixň, pot passar un cert temps abans no comenci la impressió.\n"
-"Estat de la impressió:\n"
-"%s\n"
-"\n"
-"Funciona correctament?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La(es) pŕgina(es) de prova s'ha(n) enviat al procés d'impressió.\n"
-"Degut a aixň, pot passar un cert temps abans no comenci la impressió.\n"
-"Funciona correctament?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Tanca"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "S'estŕ desactivant la xarxa"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "S'estŕ desactivant la xarxa"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcions de la impressora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "S'estŕ llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuració d'Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nom de la impressora només pot constar de lletres, números i el carŕcter "
-"de subratllat"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Cap impressora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "S'estŕ llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "S'estŕ comprovant la vostra conexió..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configura la xarxa"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "El monitor no estŕ configurat"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "S'estŕ configurant la xarxa"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Quin sistema d'impressió voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alt"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoic"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Quin sistema d'impressió voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Seleccioneu la connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quin sistema d'impressió voleu utilitzar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "S'estŕ instalˇlant el paquet %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcions de la impressora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "S'estŕ llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configura la impressora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Voleu configurar una impressora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Aquestes són les cues d'impressió següents.\n"
-"Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aquestes són les cues d'impressió següents.\n"
-"Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configura la xarxa"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Mode normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuració del mňdem"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Connexió a Internet compartida"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Connexió de la impressora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "S'esta(n) imprimint la(es) pŕgina(es) de prova... "
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Voleu comprovar la configuració?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impressora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "S'estŕ llegint la base de dades de controladors CUPS..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impressora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voleu reiniciar la xarxa"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "S'estŕ llegint la base de dades de controladors CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuració dels proxys"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "El proxy ha de ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "El número de port ha de ser numčric"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "El proxy ha de ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Entrada automŕtica"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Contrasenya"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Sense contrasenya"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Les contrasenyes no coincideixen"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No es pot afegir una partició a un RAID _formatat_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "No es pot escriure al fitxer %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "l'mkraid ha fallit"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "l'mkraid ha fallit (potser manquen eines del RAID?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hi ha prou particions per al nivell RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un programador d'ordres periňdiques."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"L'apmd s'utilitza per monitoritzar l'estat de la bateria i registrar-lo "
-"mitjançant el registre del sistema.\n"
-"També es pot utilitzar per apagar l'ordinador quan queda poca bateria."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa les ordres programades per l'ordre 'at' a l'hora que es va\n"
-"especificar en executar 'at', i executa les ordres 'batch' quan la\n"
-"mitjana de cŕrrega és prou baixa."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"El cron és un programa UNIX estŕndard que executa programes determinats\n"
-"per l'usuari en hores programades. El vixie cron afegeix un cert nombre de\n"
-"característiques al cron bŕsic, incloent seguretat millorada i opcions\n"
-"de configuració més potents."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"El GPM afegeix suport de ratolí a aplicacions Linux basades en text, com ara "
-"el Midnight Commander. També permet operacions de tallar i enganxar amb el "
-"ratolí, i inclou suport de menús desplegables a la consola."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"L'Apache és un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-"HTML i CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El procés superservidor d'Internet (conegut normalment com 'inetd') inicia\n"
-"altres serveis d'Internet a mesura que es van necessitant. És el "
-"responsable\n"
-"d'iniciar molts serveis, incloent el telnet, l'ftp, l'rsh i l'rlogin. Si\n"
-"s'inhabilita l'inetd s'inhabiliten tots els serveis de quč és responsable."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Aquest paquet carrega el mapa de teclat seleccionat segons s'ha definit\n"
-"a /etc/sysconfig/keyboard. Aixň es pot seleccionar mitjançant la utilitat\n"
-"kbdconfig.\n"
-"Per a la majoria d'ordinadors, s'ha de deixar habilitat."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"L'lpd és el procés d'impressió necessari per a que l'lpr funcioni\n"
-"correctament. Bŕsicament, es tracta d'un servidor que assigna les\n"
-"tasques d'impressió a la(es) impressora(es)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) és un servidor de noms de domini (DNS) que s'utiilitza\n"
-"per convertir noms d'ordinadors centrals en adreces IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Munta i desmunta tots els punts de muntatge dels sistemes de fitxers\n"
-"de xarxa (NFS), SMB (gestor de xarxes d'ŕrea local/Windows) i NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva totes les interfícies de xarxa configurades per\n"
-"iniciar-se durant l'arrencada."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"L'NFS és un popular protocol de compartició de fitxers en xarxes TCP/IP.\n"
-"Aquest servei proporciona la funcionalitat del servidor NFS, que es\n"
-"configura mitjançant el fitxer /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"L'NFS és un popular protocol de compartició de fitxers en xarxes TCP/IP\n"
-"Aquest servei proporciona la funcionalitat de blocatge del fitxer NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"El suport PCMCIA serveix normalment per suportar coses com ara l'ethernet\n"
-"i els mňdems en portŕtils. No s'iniciarŕ tret que es configuri, de manera\n"
-"que no hi ha problema per instalˇlar-lo en ordinadors que no el necessiten."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El portmapper gestiona les connexions RPC, que són utilitzades per\n"
-"protocols com ara l'NFS i l'NIS. El servidor portmap s'ha d'estar\n"
-"executant en ordinadors que actuen com a servidors per a protocols que\n"
-"utilitzen el mecanisme RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"El Postfix és un agent de transport de correu, que és el programa que\n"
-"passa el correu d'un ordinador a un altre."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Desa i recupera el generador d'entropia del sistema per a\n"
-"la generació de nombres aleatoris d'una més alta qualitat."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El procés 'routed' permet que la taula d'encaminadors IP automŕtics\n"
-"s'actualitzi mitjançant el protocol RIP. Mentre que el RIP s'utilitza\n"
-"ŕmpliament en xarxes petites, les xarxes complexes necessiten protocols\n"
-"d'encaminament més complexs."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocol rstat permet que els usuaris d'una xarxa recuperin\n"
-"mčtrics de funcionament de qualsevol ordinador de la mateixa."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"El protocol rusers permet que els usuaris d'una xarxa identifiquin\n"
-"qui estŕ connectat en altres ordinadors de la mateixa."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"El protocol rwho permet que els usuaris remots obtinguin una llista\n"
-"de tots els usuaris que están connectats a un ordinador que estŕ\n"
-"executant el procés rwho (similar al finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Executa el sistema X-Window en iniciar"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"El syslog és el sistema que utilitzen molts processos per registrar\n"
-"missatges en diversos fitxers de registre del sistema. És aconsellable\n"
-"executar-lo sempre."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia i atura l'X Font Server en arrencar i apagar l'ordinador."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolliu els serveis que s'han d'iniciar automŕticament durant l'arrencada"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impressora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mode de sistema"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcions de la impressora lpd remota"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Servidor, base de dades"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositiu"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "s'estŕ executant"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "aturat"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serveis i dimonis"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Malauradament no hi ha més informació\n"
-"sobre aquest servei."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "En arrencar"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Estat:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resta del món"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Accés a Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimčdia - Grŕfics"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolupament"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Control Center"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interfície de la xarxa"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Ordinador central del servidor SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jocs"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "expert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "obligatori"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "S'estŕ instalˇlant el paquet %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"No puc llegir la vostra taula de particions, estŕ massa malmesa per a mi :(\n"
-"Intentaré seguir buidant les particions incorrectes"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Error"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Publica la configuració de la instalˇlació "
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Felicitats!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalˇla"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Afegeix un usuari"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "S'estŕ formatant el fitxer de loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selecció del grup de paquets"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Si us plau, escolliu els paquets que voleu instalˇlar"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Elimina la cua"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Elimina el Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Nom d'usuari"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Si us plau, comproveu el ratolí."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Sense contrasenya"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Connexió LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Seleccioneu la connexió de la impressora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Si us plau, selecioneu la disposició del vostre teclat."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Si us plau, feu clic a una partició "
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Si us plau, escolliu els paquets que voleu instalˇlar"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Si us plau, comproveu el ratolí."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Xarxa:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nom d'usuari"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Si us plau, escolliu els paquets que voleu instalˇlar"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Voleu utilitzar l'optimització del disc dur?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Voleu utilitzar l'optimització del disc dur?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Espera"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "De bola"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "De bola"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opcions del mňdul:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configuració de xarxa"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Si us plau, escolliu els paquets que voleu instalˇlar"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "Xarxa:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Si us plau, escolliu els paquets que voleu instalˇlar"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Sistemes de fitxers"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcions"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Si us plau, seleccioneu el port sčrie al qual teniu connectat el mňdem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Configuració de xarxa"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaura des del disquet"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Altres"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalˇla el sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaura des del fitxer"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaura des del fitxer"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalitzada"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Ajuda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Estat:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Restaura des del fitxer"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Text"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Paquets a instalˇlar"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Desa al fitxer"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Si us plau, comproveu el ratolí."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Si us plau, escolliu els paquets que voleu instalˇlar"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configuració de xarxa"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configuració de xarxa"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Sistemes de fitxers"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Ha fallat la instalˇlació del %s. S'ha produďt l'error següent:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "no s'ha trobat %s"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Fet"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formata el disquet"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "S'estŕ preparant la instalˇlació"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "limita"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "limita"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formata les particions"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "S'estan desinstalˇlant els RPM"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punt de muntatge"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Escolliu les particions que voleu formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Oficina"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Interromp"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impressora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalˇla el sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Seleccioneu el fitxer"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impressora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Missatge d'inicialització"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalˇla"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Surt de la instalˇlació"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Connexió a Internet compartida"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "La connexió a Internet compartida estŕ habilitada"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara estŕ habilitada.\n"
-"\n"
-"Quč voleu fer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "inhabilita"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "deixa-ho córrer"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "torna a configurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "S'estan inhabilitant els servidors..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Ara, la compartició de la connexió a Internet estŕ inhabilitada."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "La connexió a Internet compartida estŕ inhabilitada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara estŕ inhabilitada.\n"
-"\n"
-"Quč voleu fer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "habilita"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "S'estan habilitant els servidors..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Ara, la connexió compartida a Internet estŕ habilitada."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ara configurareu l'ordinador per tal que comparteixi la connexió a "
-"Internet.\n"
-"Amb aquesta característica, altres ordinadors de la vostra xarxa local\n"
-"podran utilitzar la connexió a Internet d'aquest ordinador.\n"
-"\n"
-"Nota: per configurar una xarxa d'ŕrea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfície %s (utilitzant el mňdul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfície %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema. Si us plau, "
-"executeu l'eina de configuració de maquinari."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfície de la xarxa"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Només teniu un adaptador de xarxa configurat al sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Ara configuraré la vostra xarxa d'ŕrea local amb aquest adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Si us plau, escolliu l'adaptador de xarxa que es connectarŕ\n"
-"a la vostra xarxa d'ŕrea local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "El monitor no estŕ configurat"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configuració del mňdem"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"S'ha trobat un conflicte potencial d'adreça LAN en la configuració actual de "
-"%s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "S'ha detectat la configuració del sistema de tallafocs!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Atenció! S'ha detectat una configuració existent del sistema de tallafocs. "
-"Potser us caldrŕ fer algun ajustament manual després de la instalˇlació."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "S'estŕ configurant..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"S'estan configurant les seqüčncies, instalˇlant el programari, iniciant els "
-"servidors..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Hi ha hagut problemes en instalˇlar el paquet %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Ja estŕ tot configurat.\n"
-"Ara podeu compartir la connexió a Internet amb altres ordinadors de la "
-"vostra xarxa d'ŕrea local utilitzant la configuració automŕtica de xarxa "
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuració ja s'ha realitzat, perň ara estŕ inhabilitada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuració ja s'ha realitzat i ara estŕ habilitada."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No s'ha configurat mai cap connexió compartida a Internet."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuració de la compartició de la connexió a Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Benvingut a la utilitat de compartició de la connexió a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Feu clic a Configura per executar l'auxiliar de configuració."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuració de xarxa (%d adaptadors)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Suprimeix el perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a suprimir:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Perfil nou..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nom de l'ordinador central: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Accés a Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipus:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Passarelˇla:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Intefície:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estat:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configura l'accés a Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Programa de control"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfície"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Estat:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configura la xarxa d'ŕrea local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistent..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplica"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Si us plau, espereu... s'estŕ aplicant la configuració"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Connectat"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Sense connexió"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Connecta..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desconnecta..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocol d'arrencada"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciat en l'arrencada"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Actiu"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Actiu"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuració de la connexió a Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuració de la connexió a Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipus de connexió: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parŕmetres"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Passarelˇla"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Targeta Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "S'estŕ establint el nivell de seguretat"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Control Center"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Escolliu l'eina que voleu utilitzar "
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadenc (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandčs"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "sčrie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "sintaxi: keyboarddrake [--expert] [teclat]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Si us plau, selecioneu la disposició del vostre teclat."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voleu que la tecla Enrere efectuď un Suprimeix en la consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Canvieu el CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Si us plau, inseriu el CD-ROM d'instalˇlació a la unitat i després\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancelˇla per evitar la instalˇlació en directe."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "No es pot iniciar l'actualització en directe !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Mostr-ho només per a avui"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fitxer/_Nou"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fitxer/_Obre"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fitxer/_Desa"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fitxer/_Anomena i desa"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fitxer/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcions"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcions/Prova"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ajuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Quant a..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nom d'usuari"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "missatges"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "cerca"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Eina per veure els registres"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Parŕmetres"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "que coincideixin amb"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "perň que no coincideixein amb"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Escolliu el fitxer"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendari"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contingut del fitxer"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "si us plau, espereu, s'estŕ analitzant el fitxer: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "ombra"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interessant"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "s'estŕ formatant"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configuració"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Anomena i desa..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "no s'ha trobat cap serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Voleu emular el tercer botó?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Seleccioneu una targeta grŕfica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositiu d'arrencada"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuració del sistema de tallafocs"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuració del sistema de tallafocs"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Sistema de tallafocs\n"
-"\n"
-"Ja heu configurat un tallafocs.\n"
-"Feu clic a Configura per canviar o eliminar el tallafoc"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Sistema de tallafocs\n"
-"\n"
-"Feu clic a Configura per configurar un tallafocs estŕndard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escolliu el vostre idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Tipus d'instalˇlació"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detecció del disc dur"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configura el ratolí"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escolliu el vostre teclat"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguretat"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemes de fitxers"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formata les particions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Paquets a instalˇlar"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalˇla el sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Afegeix un usuari"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configura la xarxa"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configura els serveis"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalˇla el LILO"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crea un disc d'arrencada"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configura l'X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalˇla el sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Surt de la instalˇlació"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configurador del tinyfirewall\n"
-"\n"
-"Amb aixň es configura un tallafocs personal per a aquest ordinador Linux "
-"Mandrake.\n"
-"Per a una potent solució de tallafocs dedicada, consulteu si us plau la "
-"distribució especialitzada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ara us farem preguntes sobre els serveis a quč voleu autoritzar que\n"
-"Internet us connecti. Si us plau, penseu-hi a fons perquč la seguretat\n"
-"del vostre ordinador és important.\n"
-"\n"
-"Si us plau, si un moment donat no esteu utilitzant algun d'aquests serveis,\n"
-"desactiveu-ne el tallafocs. Podeu canviar aquesta configuració sempre que\n"
-"vulgueu tornant a executar aquesta aplicació!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de web en aquest ordinador que necessiteu que\n"
-"pugui veure tothom a Internet? Si esteu executant un servidor de web a quč\n"
-"només ha d'accedir aquest ordinador, aquí podeu respondre tranquilˇlament "
-"NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de noms en aquest ordinador? Si no n'heu\n"
-"configurat cap per proporcionar la IP i la informació de zona a tothom a\n"
-"Internet, si us plau responeu NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Voleu autoritzar les connexions Secure Shell (ssh) d'entrada? Es tracta\n"
-"d'una substitució del Telnet que podeu utilitzar per entrar. Si ara esteu\n"
-"utilitzant el Telnet, passeu-vos a l'ssh sense cap mena de dubte; el\n"
-"Telnet no estŕ xifrat, de manera que us poden robar la contrasenya si\n"
-"l'utilitzeu, mentre que l'ssh estŕ xifrat i no permet cap mena d'intercepció."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Voleu autoritzar les connexions Telnet d'entrada?\n"
-"Aixň és tremendament insegur, com hem dit a la pantalla anterior. Us\n"
-"recomanem vivament que respongueu No aquí i que utilitzeu l'ssh en comptes\n"
-"del Telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Esteu executant un servidor d'FTP que necessiteu que sigui accessible a\n"
-"Internet? Si és així, us recomanen vivament que només l'utilitzeu per a\n"
-"transferčncies anňnimes, ja que qualsevol contrasenya que s'envia per FTP\n"
-"pot ser robada, atčs que l'FTP no utilitza xifratge per a la transferčncia\n"
-"de contrasenyes.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor de correu? Si esteu enviant els missatges\n"
-"a través del pine, el mutt o qualsevol altre client de correu basat en\n"
-"text, probablement és així. En cas contrari, desactiveu-ne el tallafocs.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Esteu executant un servidor POP o IMAP? Aixň s'utilitzaria\n"
-"per allotjar comptes de correu dels usuaris, no basats en web,\n"
-"mitjançant aquest ordinador.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Sembla que esteu utilitzant un nucli 2.2. Si l'ordinador de\n"
-"casa o de l'oficina estableix automŕticament la IP de la vostra\n"
-"xarxa (assignació dinŕmica), us cal autoritzar aixň. És aquest el cas?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"El vostre ordinador estŕ sincronitzat pel que fa al temps amb un altre?\n"
-"Normalment, aixň ho utilitzen organitzacions Unix/Linux mitjanes-grans\n"
-"per sincronitzar el temps de les entrades i coses així. Si no sou una part\n"
-"d'una oficina gran i no heu sentit parlar d'aixň, probablement no us trobeu\n"
-"en aquest cas."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"La configuració estŕ completa. Podem desar aquests canvis al disc?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "No es pot obrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "No s'ha pogut obrir %s per escriure-hi: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Configuració del sistema de tallafocs"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Si us plau, espereu, s'estŕ preparant la instalˇlació"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordinador de xarxa (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, Servidor SMB, Servidor intermediari, Servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estació de treball GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Eines per al Palm Pilot o per al Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estació de treball"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Tallafoc/Encaminador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programes d'ofimŕtica: processadors de textos (kword, abiword), gestors de "
-"fulls de cŕlcul (kspread, gnumeric), visualitzadors pdf, etc."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Eines d'ŕudio: reproductors d'mp3 o midi, mescladors, etc."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Llibres i Com es fa... sobre el Linux i el programari lliure"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estació de treball KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimčdia - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunt d'eines per al correu, notícies, web, transferčncia de fitxers i xat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, base de dades"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Eines per facilitar la configuració de l'ordinador"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimčdia - So"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitats"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentació"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Eines de consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estació d'Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estació multimčdia"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Configuració de la LAN"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Més escriptoris grŕfics (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "Entorn d'escriptori K, l'entorn grŕfic bŕsic que inclou diverses eines"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorn grŕfic"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Eines per crear i gravar CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estació de treball Office"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programes grŕfics com ara el Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Biblioteques de desenvolupament C i C++, programes i fitxers inclosos"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor d'ordinador de xarxa"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correu/Groupware/Notícies"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estació de jocs"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductors i editors de vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimčdia - Grŕfics"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programes d'entreteniment: acció, jocs de taula, estratčgia, etc."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunt d'eines per llegir i enviar correu i notícies (pine, mutt, tin...) i "
-"per navegar pel Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arxivament, emuladors, monitorització"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Comptabilitat personal"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Entorn grŕfic amb un conjunt d'aplicacions i eines d'escriptori fŕcil "
-"d'utilitzar"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients per a diferents protocols, incloent l'ssh"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Accés a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programes de reproducció/edició de so i vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Altres escriptoris grŕfics"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editors, intčrprets d'ordres, eines de fitxer, terminals"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programes per gestionar els vostres comptes, com ara el gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestió d'informació personal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimčdia - Gravació de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estació científica de treball"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Interromp"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Cap"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Escolliu l'usuari per omissió:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Impressora remota"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Ara podeu proporcionar les seves opcions per al mňdul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "ha fallat el muntatge"
-
-#~ msgid "Low"
-#~ msgstr "Baix"
-
-#~ msgid "Medium"
-#~ msgstr "Mitjŕ"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Poques millores per a aquest nivell de seguretat; la principal és que hi "
-#~ "ha\n"
-#~ "més avisos i comprovacions de seguretat."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimčdia"
-
-#~ msgid "Boot mode"
-#~ msgstr "Mode d'arrencada"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Expert"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "El GNU/Linux gestiona l'hora en GMT (Hora de Greenwich) i la\n"
-#~ "tradueix a l'hora local segons la zona horŕria seleccionada."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Connecta't a Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Desconnecta't d'Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configura la connexió de xarxa (LAN o Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "A quin disc us voleu desplaçar?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Si us plau, escolliu els paquets que voleu instalˇlar"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informació"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Estació de treball GNOME"
-
-#~ msgid "authentification"
-#~ msgstr "autenticació"
-
-#~ msgid "user"
-#~ msgstr "usuari"
-
-#, fuzzy
-#~ msgid ""
-#~ "Apache is a World Wide Web server. It is used to serve HTML files and "
-#~ "CGI."
-#~ msgstr ""
-#~ "L'Apache és un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-#~ "HTML i CGI."
-
-#~ msgid ""
-#~ "named (BIND) is a Domain Name Server (DNS) that is used to resolve\n"
-#~ "host names to IP addresses."
-#~ msgstr ""
-#~ "named (BIND) és un servidor de noms de domini (DNS) que s'utiilitza\n"
-#~ "per convertir noms d'ordinadors centrals en adreces IP."
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Si us plau, seleccioneu el vostre tipus de ratolí."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Surt"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Muntatge automŕtic del suport extraďble"
-
-#~ msgid "Active"
-#~ msgstr "Actiu"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "No"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "S'ha detectat una impressora, model \"%s\", a"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Dispositiu de la impressora local"
-
-#~ msgid "Printer Device"
-#~ msgstr "Dispositiu d'impressora"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Servidor CUPS remot"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Servidor CUPS remot"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mode de sistema"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Altres"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Si us plau, selecioneu la disposició del vostre teclat."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Si us plau, feu clic a una partició "
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tipus: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Fitxer de cňpia de seguretat incorrecte"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Configura l'X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Dispositiu d'impressora"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Cancelˇla"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "D'acord"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Tanca"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "S'estŕ comprovant la vostra conexió..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "S'estŕ tancant la connexió..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "La connexió no estŕ tancada.\n"
-#~ "Intenteu fer-ho manualment executant\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "a root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Ara, el sistema estŕ desconnectat."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Escolliu la mida que voleu instalˇlar"
-
-#~ msgid "Total size: "
-#~ msgstr "Mida total: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Si us plau, espereu, "
-
-#~ msgid "Total time "
-#~ msgstr "Temps total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Voleu utilitzar la configuració existent per a X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "A quin dispositiu estŕ connectada la vostra impressora?\n"
-#~ "(tingueu en compte que /dev/lp0 equival a LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Compte, l'adaptador de xarxa ja estŕ configurat. El tornaré a configurar."
-
-#~ msgid "New"
-#~ msgstr "Nou"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Elimina"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Si us plau, feu clic a una partició "
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambigüitat (%s), sigueu més precís\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (predeterminat %s) "
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "La vostra elecció? (predeterminat %s introduďu `cap' per a cap) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "no es pot obrir /etc/sysconfig/autologin per a lectura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Voleu reiniciar la xarxa"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Hi esteu d'acord?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ara reiniciaré el dispositiu de xarxa:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ara reiniciaré el dispositiu de xarxa %s. Hi esteu d'acord?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Tret que sapigueu expressament que s'ha d'indicar una altra cosa, "
-#~ "l'elecció\n"
-#~ "habitual és \"/dev/hda\" (el disc IDE mestre primari) o bé \"/dev/sda\"\n"
-#~ "(el primer disc SCSI)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Tipus de connexió: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Escolliu l'usuari per omissió:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Si us plau, comproveu el ratolí."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Escolliu l'idioma que voleu utilitzar per a la instalˇlació i per a l'ús "
-#~ "del sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Heu d'acceptar els termes de la llicčncia de més amunt per poder "
-#~ "continuar la instalˇlació.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si us plau, feu clic a \"Accepto\" si hi esteu d'acord.\n"
-#~ "\n"
-#~ "\n"
-#~ "Feu clic a \"No accpeto\" si no hi esteu d'acord. La instalˇlació "
-#~ "finalitzarŕ sense modificar la instalˇlació actual."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Escolliu el vostre tipus de teclat de la llista inferior"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Si desitgeu que altres idiomes (a més del que vau triar en\n"
-#~ "iniciar la instalˇlació) estiguin disponibles després de la "
-#~ "instalˇlació,\n"
-#~ "escolliu-los de la llista de més amunt. Si els voleu seleccionar tots,\n"
-#~ "només cal que seleccioneu \"Tots\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ " - Personalitzada: Si esteu familiaritzat amb el Linux, podreu\n"
-#~ "triar l'ús del sistema instalˇlat entre Normal, Desenvolupament o\n"
-#~ "Servidor. Trieu \"Normal\" per a una instalˇlació per a un ús\n"
-#~ "general del vostre ordinador, \"Desenvolupament\" si utilitzareu\n"
-#~ "l'ordinador principalment per a desenvolupament de programari,\n"
-#~ "o \"Servidor\" si voleu instalˇlar un servidor convencional (per\n"
-#~ "a correu, impressions...).\n"
-#~ "\n"
-#~ "\n"
-#~ " - Per a experts: Si domineu el GNU/Linux i voleu realitzar una\n"
-#~ "instalˇlació totalment personalitzada, aquest és el vostre\n"
-#~ "tipus d'instalˇlació. Podreu seleccionar l'ús del vostre sistema\n"
-#~ "com a \"Personalitzada\"."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ " at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ " will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ " or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ " SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ " server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ara heu de decidir com utilitzareu l'ordinador. Les opcions són:\n"
-#~ "\n"
-#~ "* Estació de treball: l'elecció ideal si penseu utilitzar l'ordinador "
-#~ "bŕsicament per a l'ús quotidiŕ, a la feina o\n"
-#~ " a casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Desenvolupament: si penseu utilitzar l'ordinador bŕsicament per a "
-#~ "desenvolupament de programari, aquesta és l'elecció ideal.\n"
-#~ " Tindreu instalˇlada una completa colˇlecció de programari per poder "
-#~ "compilar, depurar i formatar codi font,\n"
-#~ " o crear paquets de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servidor: si penseu utilitzar l'ordinador com a servidor, aquesta és "
-#~ "l'elecció ideal, ja sigui un servidor de fitxers (NFS o\n"
-#~ " SMB), un servidor d'impressió (tipus Unix o Microsoft Windows), un "
-#~ "servidor d'autenticació (NIS), un servidor\n"
-#~ " de bases de dades, etc. En canvi, no espereu que se us instalˇlin coses "
-#~ "com ara el KDE, el GNOME, etc.)"
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ara podeu seleccionar el grup de paquets que voleu instalˇlar o "
-#~ "actualitzar.\n"
-#~ "\n"
-#~ "\n"
-#~ "El DrakX comprovarŕ si teniu prou espai per instalˇlar-los tots i, si no, "
-#~ "us\n"
-#~ "ho avisarŕ. Si voleu seguir igualment, continuarŕ amb la instalˇlació de "
-#~ "tots\n"
-#~ "els grups seleccionats perň no n'instalˇlarŕ alguns de menys interčs. Al "
-#~ "final\n"
-#~ "de la llista podeu seleccionar l'opció \"Selecció individual de paquets"
-#~ "\", i\n"
-#~ "en aquest cas haureu de navegar per més de 1.000 paquets..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ara podeu triar individualment tots els paquets que voleu instalˇlar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Podeu expandir o reduir l'arbre fent clic a les opcions del racó esquerre "
-#~ "de la finestra de paquets.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si preferiu veure els paquets ordenats alfabčticament, feu clic a la "
-#~ "icona\n"
-#~ "\"Commuta entre ordenació plana i per grups\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no voleu ser avisat pel que fa a les dependčncies, feu clic a "
-#~ "\"Dependčncies\n"
-#~ "automŕtiques\". Si ho feu, tingueu en compte que el fet de "
-#~ "desseleccionar\n"
-#~ "un paquet pot causar la desselecció d'altres paquets que en depenen, i "
-#~ "no\n"
-#~ "us n'assabentareu."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Si teniu tots els CD de la llista superior, feu clic a D'acord.\n"
-#~ "Si no teniu cap d'aquests CD, feu clic a Cancelˇla.\n"
-#~ "Si només falten alguns CD, desseleccioneu-los i feu clic a D'acord."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Si voleu connectar l'ordinador a Internet o a una xarxa local, "
-#~ "seleccioneu\n"
-#~ "l'opció corresponent, perň abans recordeu engegar el dispositiu per tal "
-#~ "que\n"
-#~ "el DrakX el detecti automŕticament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no teniu connexió a Internet ni a cap xarxa local, escolliu "
-#~ "\"Inhabilita el servei de xarxa\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu configurar la xarxa més endavant, després de la instalˇlació, o "
-#~ "si\n"
-#~ "heu acabat la configuració de la connexió de xarxa, trieu \"Fet\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "No s'ha detectat cap mňdem. Si us plau, seleccioneu el port sčrie on estŕ "
-#~ "connectat.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per a la vostra informació, el primer port sčrie (anomenat \"COM1\" en "
-#~ "Microsoft Windows) s'anomena \"ttyS0\" en Linux."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ara podeu introduir les opcions de marcatge. Si no sabeu quč heu "
-#~ "d'introduir,\n"
-#~ "o si no n'esteu segur, podreu aconseguir la informació necessŕria del "
-#~ "vostre\n"
-#~ "proveďdor d'Internet. Si no introduďu aquí la informació del DNS "
-#~ "(servidor de\n"
-#~ "noms), aquesta informació s'obtindrŕ del proveďdor en el moment de "
-#~ "connectar."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Si el mňdem que teniu és extern, engegueu-lo per tal que el DrakX el "
-#~ "detecti automŕticament."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Si us plau, engegueu el mňdem i trieu-ne el correcte."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Si no esteu segur de si la informació de més amunt és correcta, si no "
-#~ "sabeu\n"
-#~ "quč introduir o si no n'esteu segur, podreu aconseguir la informació\n"
-#~ "necessŕria del vostre proveďdor d'Internet. Si no introduďu aquí la\n"
-#~ "informació del DNS (servidor de noms), aquesta informació s'obtindrŕ del\n"
-#~ "proveďdor en el moment de connectar."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central. Si no esteu "
-#~ "segur del que hi\n"
-#~ "heu d'introduir, el vostre proveďdor us en donarŕ la informació correcta."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ " * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ " You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ " ask your network administrator.\n"
-#~ "\n"
-#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ " \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ara podeu configurar el voste dispositiu de xarxa.\n"
-#~ "\n"
-#~ " * Adreça IP: si no la sabeu, o no n'esteu segur, pregunteu-la a "
-#~ "l'administrador de la xarxa.\n"
-#~ " No heu d'introduir cap adreça IP si més avall seleccioneu l'opció "
-#~ "\"IP automŕtica\".\n"
-#~ "\n"
-#~ " * Mŕscara de la xarxa: Normalment, \"255.255.255.0\" és una bona "
-#~ "elecció. Si no n'esteu segur, consulteu-ho a l'administrador de la "
-#~ "xarxa.\n"
-#~ "\n"
-#~ " * IP automŕtica: si la vostra xarxa utilitza els protocols BOOTP o "
-#~ "DHCP,\n"
-#~ "seleccioneu aquesta opció. Si es selecciona, no cal cap valor per a "
-#~ "\"Adreça IP\". Si no n'esteu segur, consulteu-ho a l'administrador de la "
-#~ "xarxa."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central, si cal. Si no "
-#~ "el\n"
-#~ "sabeu, o no esteu segur de quč heu d'introduir, consulteu a "
-#~ "l'administrador de la xarxa."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ara podeu introduir el nom del vostre ordinador central, si cal. Si no\n"
-#~ "el sabeu, o si esteu segur de quč introduir, deixeu-ho en blanc."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ara podeu introduir les opcions de marcatge. Si no esteu segur del que "
-#~ "hi\n"
-#~ "heu d'introduir, el vostre proveďdor us en donarŕ la informació correcta."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Si teniu previst utilitzar proxys, configureu-los ara. Si no sabeu si\n"
-#~ "n'utilitzareu, consulteu-ho a l'administrador de la xarxa o al vostre\n"
-#~ "proveďdor."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Podeu instalˇlar el paquet criptogrŕfic si la vostra connexió a Internet\n"
-#~ "s'ha configurat correctament. Escolliu primer una rčpilca des de la qual\n"
-#~ "vulgueu descarregar paquets i després seleccioneu els paquets a "
-#~ "instalˇlar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tingueu en compte que heu de seleccionar la rčplica i els paquets\n"
-#~ "criptogrŕfics segons la vostra legislació."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ara podeu seleccionar la zona horŕria segons el lloc on viviu."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Podeu configurar una impressora local (connectada al vostre ordinador) o\n"
-#~ "remota (accessible mitjançant una xarxa Unix, Netware o Microsoft "
-#~ "Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Si voleu imprimir, trieu un sistema de impressió entre CUPS i LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "El CUPS és un nou sistema d'impressió, potent i flexible, per a sistemes "
-#~ "Unix\n"
-#~ "(CUPS significa \"Common Unix Printing System\"). És el sistema "
-#~ "d'impressió\n"
-#~ "per defecte en Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "L'LPR és l'antic sistema d'impressió utilitzat en distribucions anteriors "
-#~ "de\n"
-#~ "Mandrake Linux distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no teniu impressora, feu clic a \"Cap\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "El GNU/Linux pot treballar amb molts tipus d'impressores, perň cada un\n"
-#~ "d'aquests tipus requereix una configuració diferent.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si teniu la impressora connectada físicament a l'ordinador, seleccioneu\n"
-#~ "\"Impressora local\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba en un ordinador Unix "
-#~ "remot,\n"
-#~ "seleccioneu \"Impressora remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba en un ordinador Microsoft\n"
-#~ "Windows remot (o en un ordinador Unix que utilitza el protocol SMB),\n"
-#~ "seleccioneu \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ " other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Location: if you want to put some information on your\n"
-#~ " printer location, put it here (you are free to write what\n"
-#~ " you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Si us plau, engegueu la impressora abans de continuar per tal que el "
-#~ "DrakX\n"
-#~ "la pugui detectar.\n"
-#~ "\n"
-#~ "Aquí heu d'introduir algunes dades.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Nom de la impressora: l'spool d'impressió utilitza \"lp\" com a nom "
-#~ "per\n"
-#~ "omissió de la impressora. Per tant, heu de tenir una impressora "
-#~ "anomenada\n"
-#~ "\"lp\".\n"
-#~ " Si només teniu una impressora, podeu donar-li diversos;\n"
-#~ "noms; només cal que els separeu amb el carŕcter \"|\". Per tant,\n"
-#~ "si preferiu un nom més expressiu, l'heu d'indicar en primer lloc\n"
-#~ "(per exemple: \"La meva impressora|lp\").\n"
-#~ " La impressora que contingui \"lp\" al(s) nom(s) serŕ la impressora "
-#~ "per omissió.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Descripció: és opcional, perň pot ser útil si teniu diverses\n"
-#~ "impressores connectades a l'ordinador o si permeteu que altres\n"
-#~ "ordinadors accedeixin a aquesta impressora.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Ubicació: si voleu incloure informació sobre la ubicació de la\n"
-#~ "impressora, feu-ho aquí (podeu escriure el que vulgueu, (per exemple,\n"
-#~ "\"2n pis\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ " \n"
-#~ " * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ " if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ " If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ " protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Aquí heu d'introduir algunes dades.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Nom de la cua: l'spool d'impressió utilitza \"lp\" com a nom per\n"
-#~ "omissió de la impressora. Per tant, heu de tenir una impressora "
-#~ "anomenada\n"
-#~ "\"lp\".\n"
-#~ " Si només teniu una impressora, podeu donar-li diversos;\n"
-#~ "noms; només cal que els separeu amb el carŕcter \"|\". Per tant,\n"
-#~ "si preferiu un nom més expressiu, l'heu d'indicar en primer lloc\n"
-#~ "(per exemple: \"La meva impressora|lp\").\n"
-#~ " La impressora que contingui \"lp\" al(s) nom(s) serŕ la impressora "
-#~ "per omissió.\n"
-#~ "\n"
-#~ " \n"
-#~ " * Directori d'spool: les tasques d'impressió s'emmagatzemen en aquest "
-#~ "directori.Conserveu la opció predeterminada si no sabeu quina utilitzar\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ " Si voleu accedir a una impressora que es troba en un ordinador Unix\n"
-#~ "remot, seleccioneu \"Impressora lpd remota\".\n"
-#~ "\n"
-#~ "\n"
-#~ " Si voleu accedir a una impressora que es troba en un ordinador\n"
-#~ "Microsoft Windows remot (o en un ordinador Unix que utilitza el protocol\n"
-#~ "SMB), seleccioneu \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ " Si voleu accedir a una impressora que es troba en una xarxa "
-#~ "NetWare,\n"
-#~ "seleccioneu \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "No s'ha detectat la vostra impressora. Si us plau, introduďu el nom del\n"
-#~ "dispositiu a quč estŕ connectada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per a la vostra informació, la majoria d'impressores estan connectades "
-#~ "al\n"
-#~ "primer port paralˇlel, que s'anomena \"/dev/lp0\" en GNU/Linux i \"LPT1"
-#~ "\"\n"
-#~ "en Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Ara heu de seleccionar la vostra impressora a la llista superior."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Si us plau, seleccioneu les opcions correctes segons la vostra "
-#~ "impressora;\n"
-#~ "consulteu-ne la documentació si no sabeu quč heu de seleccionar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Podreu comprovar la configuració en el pas següent i modificar-la si no\n"
-#~ "funciona exactament com voleu."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ara podeu introduir la contrasenya de l'usuari 'root' del vostre\n"
-#~ "sistema Mandrake Linux. Ho heu de fer dos cops per verificar que\n"
-#~ "ambdues introduccions són idčntiques.\n"
-#~ "\n"
-#~ "\n"
-#~ "L'usuari 'root' és l'administrador del sistema, i és l'únic\n"
-#~ "autoritzat per modificar la configuració del sistema; per tant,\n"
-#~ "trieu amb molta cura aquesta contrasenya. L'ús no autoritzat del\n"
-#~ "compte 'root' pot ser extremadament perillós per a la integritat\n"
-#~ "del sistema, per a les seves dades, i per a altres sistema que hi\n"
-#~ "estan connectats.\n"
-#~ "\n"
-#~ "\n"
-#~ "La contrasenya s'ha de crear amb diversos carŕcters alfanumčrics, ha de\n"
-#~ "tenir una llargada mínima de 8 carŕcters, i mai no s'ha d'anotar enlloc.\n"
-#~ "\n"
-#~ "\n"
-#~ "No obstant aixň, no creeu una contrasenya excessivament llarga o\n"
-#~ "complicada: heu de poder recordar-la sense problemes."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ara podeu crear un o més comptes \"normals\" d'usuari, en\n"
-#~ "contraposició al compte \"privilegiat\", el 'root'. Podeu crear\n"
-#~ "un o més comptes per a cada una de les persones a qui permetreu\n"
-#~ "utilitzar l'ordinador. Tingueu en compte que cada compte d'usuari\n"
-#~ "tindrŕ les seves prňpies preferčncies (entorn grŕfic, parŕmetres\n"
-#~ "del programa. etc.) i el seu propi \"directori inicial\", on\n"
-#~ "s'emmagatzemen aquestes preferčncies.\n"
-#~ "\n"
-#~ "\n"
-#~ "Primer de tot, creeu-vos un compte propi! Encara que sigueu l'únic\n"
-#~ "usuari de l'ordinador, NO us connecteu com a 'root'\n"
-#~ "per a l'ús quotidiŕ del sistema: és un risc de seguretat molt alt.\n"
-#~ "Tot sovint, fer el sistema inutilitzable depčn d'un simple error\n"
-#~ "tipogrŕfic.\n"
-#~ "\n"
-#~ "\n"
-#~ "Per tant, connecteu-vos al sistema amb el compte d'usuari que heu\n"
-#~ "creat, i entreu-hi com a 'root' només per a tasques d'administració\n"
-#~ "i manteniment."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "És molt recomanable crear un disc d'arrencada. Si no podeu arrencar "
-#~ "l'ordinador,\n"
-#~ "és l'única manera de solucionar-ho sense haver de reinstalˇlar-ho tot."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Les opcions principals del LILO i del Grub són:\n"
-#~ " - Dispositiu d'arrencada: Defineix el nom del dispositiu (p.\n"
-#~ "ex., una partició del disc dur) que conté el sector d'arrencada.\n"
-#~ "Tret que sapigueu expressament que s'ha d'indicar una altra cosa,\n"
-#~ "trieu \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Temps d'espera abans d'arrencar la imatge per defecte: Especifica el\n"
-#~ "temps, en dčcimes de segon, que el carregador d'arrencada ha\n"
-#~ "d'esperar abans de carregar la primera imatge.\n"
-#~ "Aixň és útil en sistemes que arrenquen immediatament des del disc\n"
-#~ "dur després d'habilitar el teclat. El carregador d'arrencada no\n"
-#~ "esperarŕ si s'omet el \"temps d'espera\" o si se li dóna el valor zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Mode de vídeo: Amb aixň s'especifica el mode de text VGA que\n"
-#~ "cal seleccionar en arrencar. Es poden utilitzar els valors\n"
-#~ "següents:\n"
-#~ " * normal: selecciona el mode de text 80x25 normal.\n"
-#~ " * <número>: utilitza el mode de text corresponent.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Neteja de \"/tmp\" en cada arrencada: si voleu suprimir tots els "
-#~ "fitxers i\n"
-#~ "directoris emmagatzemats a \"/tmp\" en arrencar el sistame, seleccioneu\n"
-#~ "aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Si cal, indicació de la mida exacta de la RAM: malauradament, no hi "
-#~ "cap\n"
-#~ "mčtode estŕndard per preguntar al BIOS la quantitat de RAM que teniu a\n"
-#~ "l'ordinador. Per tant, és possible que el Linux no pugui detectar\n"
-#~ "correctament la quantitat de RAM instalˇlada. Si és aquest el cas, en "
-#~ "podeu\n"
-#~ "indicar aquí la quantitat correcta, perň penseu que una diferčncia de 2 o "
-#~ "4\n"
-#~ "MB entre la memňria detectada i la memňria real és normal."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "El SILO és un carregador d'arrencada per a l'SPARC: pot arrencar el\n"
-#~ "GNU/Linux o qualsevol altre sistema operatiu que tingueu a l'ordinador.\n"
-#~ "Normalment, aquests altres sistemes operatius es detecten i instalˇlen\n"
-#~ "correctament, perň si no és així, podeu afegir-los manualment en aquesta\n"
-#~ "pantalla. Aneu amb compte de triar els parŕmetres correctes.\n"
-#~ "\n"
-#~ "\n"
-#~ "També és possible que no volgueu donar accés a tothom a aquests sistemes\n"
-#~ "operatius; en aquest cas podeu suprimir les entrades corresponents, perň\n"
-#~ "aleshores us caldrŕ un disc d'arrencada per poder-los arrencar!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ " - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Les opcions principals del SILO són:\n"
-#~ " - Instalˇlació del carregador d'arrencada: indica on voleu situar la\n"
-#~ "informació necessŕria per arrencar el GNU/Linux. Tret que sapigueu\n"
-#~ "exactament quč esteu fent, seleccioneu \"Primer sector de la unitat\n"
-#~ "(MBR)\".\n"
-#~ " \n"
-#~ "\n"
-#~ " - Temps d'espera abans d'arrencar la imatge per defecte: Especifica el\n"
-#~ "temps, en dčcimes de segon, que el carregador d'arrencada ha\n"
-#~ "d'esperar abans de carregar la primera imatge.\n"
-#~ "Aixň és útil en sistemes que arrenquen immediatament des del disc\n"
-#~ "dur després d'habilitar el teclat. El carregador d'arrencada no\n"
-#~ "esperarŕ si s'omet el \"temps d'espera\" o si se li dóna el valor zero."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ara cal configurar el sistema X Window, que és el nucli del GUI\n"
-#~ "(Interfície grŕfica d'usuari) del GNU/Linux. Per a aixň, heu de\n"
-#~ "configurar la vostra targeta grŕfica i el monitor. No obstant\n"
-#~ "aixň, la majoria d'aquests passos estan automatitzats, així que pot\n"
-#~ "ser que la vostra feina es limiti a verificar quč s'ha fet i a\n"
-#~ "acceptar els parŕmetres :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Quan la configuració hagi acabat s'iniciarŕ X (tret que demaneu al\n"
-#~ "Drakx que no ho faci), i podreu verificar si els parŕmetres us\n"
-#~ "convenen. Si no, podreu tornar enrere i canviar-los tantes vegades\n"
-#~ "com calgui."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Si hi ha algun problema a la configuració X, utilitzeu aquestes opcions\n"
-#~ "per configurar correctament l'X Window System."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Si preferiu utilitzar una entrada grŕfica, seleccioneu \"Sí\". En cas\n"
-#~ "contrari, seleccioneu \"No\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Podeu triar un nivell de seguretat per al vostre sistema. Si us plau,\n"
-#~ "consulteu el manual per obtenir informació completa. Bŕsicament, si no\n"
-#~ "sabeu quč triar, conserveu l'opció per defecte.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ara, el sistema es tornarŕ a arrencar.\n"
-#~ "\n"
-#~ "Després d'aixň, el sistema Mandrake Linux es carregarŕ\n"
-#~ "automŕticament. Si voleu arrencar un altre sistema operatiu existent,\n"
-#~ "llegiu les instruccions addicionals."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Txec (Programadors)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslovac (Programadors)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nom del perfil a crear:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Escriu a /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formata-ho tot"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Després de formatar totes les particions,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "totes les dades d'aquestes particions s'hauran perdut"
-
-#~ msgid "Reload"
-#~ msgstr "Torna a carregar"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "Voleu generar un disquet d'instalˇlació automŕtica per fer cňpies del "
-#~ "Linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuració de l'ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Amb un servidor CUPS remot, aquí no us cal configurar cap\n"
-#~ "impressora; les impressores es detectaran automŕticament,\n"
-#~ "tret que tingueu un servidor en una altra xarxa; en aquest\n"
-#~ "cas, heu d'indicar l'adreça IP, i opcionalment el número de\n"
-#~ "port, al servidor CUPS."
-
-#~ msgid "Remote queue"
-#~ msgstr "Cua remota"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Cua remota"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Nom de domini"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Cap impressora"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Monitorització de la xarxa"
-
-#~ msgid "Profile "
-#~ msgstr "Perfil "
-
-#~ msgid "Statistics"
-#~ msgstr "Estadístiques"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "S'estŕ enviant la velocitat: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "S'estŕ rebent la velocitat: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Tipus de connexió: "
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "S'estŕ establint la connexió a Internet"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "S'estŕ realitzant la desconnexió d'Internet"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "No s'ha pogut realitzar la desconnexió d'Internet"
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "La desconnexió d'Internet ha finalitzat"
-
-#~ msgid "Connection complete."
-#~ msgstr "La connexió ha finalitzat."
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "No s'ha pogut establir la connexió.\n"
-#~ "Comproveu la configuració al Centre de control de Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "enviat: "
-
-#~ msgid "received: "
-#~ msgstr "rebut: "
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "escombraries"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Predeterminat"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "No s'ha pogut interpretar el contingut del fitxer de configuració."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Fitxer de configuració no reconegut"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptador"
-
-#~ msgid "Disable network"
-#~ msgstr "Inhabilita el sistema de xarxa"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Inhabilita el sistema de xarxa"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ara podeu provar el ratolí. Utilitzeu els botons i la bola per comprovar "
-#~ "que\n"
-#~ "els parŕmetres són correctes; si no ho són, feu clic a \"Cancelˇla\" per\n"
-#~ "seleccionar un altre controlador."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Connexió per DSL (o ADSL)"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Tanca"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Podeu indicar directament l'URI per accedir a la impressora amb CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Sí, imprimeix una pŕgina ASCII de prova"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Sí, imprimeix una pŕgina PostScript de prova"
-
-#~ msgid "Paper Size"
-#~ msgstr "Mida del paper"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Voleu expulsar la pŕgina després de la tasca?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcions del programa de control Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcions de profunditat del color"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Voleu imprimir el text com a PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Voleu ajustar el text 'stair-stepping'?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nombre de pŕgines per pŕgines de sortida"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marges dret/esquerra en punts (1/72 de polzada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marges superior/inferior en punts (1/72 de polzada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "opcions addicionals del GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opcions addicionals per al text"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverteix l'ordre de les pŕgines"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccioneu la connexió de la impressora remota"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impressora necessita un nom (p.ex. lp).\n"
-#~ "Es poden definir altres parŕmetres, com ara la descripció de la "
-#~ "impressora\n"
-#~ "o la seva ubicació. Quin nom cal utilitzar per a aquesta impressora, i "
-#~ "com\n"
-#~ "estŕ connectada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada cua d'impressió (a quč s'adrecen les tasques d'impressió) necessita\n"
-#~ "un nom (sovint lp) i un directori d'spool associada amb ell. Quin nom i\n"
-#~ "directori cal utilitzar per a aquesta cua, i com estŕ connectada la "
-#~ "impressora?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nom de la cua"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directori d'spool"
-
-#~ msgid "Disable"
-#~ msgstr "Inhabilita"
-
-#~ msgid "Enable"
-#~ msgstr "Habilita"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Per habilitar un sistema més segur, seleccioneu \"Utilitza el\n"
-#~ "fitxer d'ombra\" i \"Utilitza les contrasenyes MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Si la vostra xarxa utilitza NIS, seleccioneu \"Utilitza NIS\". Si no ho\n"
-#~ "sabeu, consulteu a l'administrador de la xarxa."
-
-#~ msgid "yellow pages"
-#~ msgstr "pŕgines grogues"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Configuració de la LAN"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1 del proveďdor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2 del proveďdor"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Com us voleu connectar a Internet?"
-
-#~ msgid "cannot fork: "
-#~ msgstr "no es pot bifurcar: "
-
-#~ msgid "Configure..."
-#~ msgstr "Configura..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "S'ha seleccionat la mida %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "S'estŕ obrint la connexió..."
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "Aquest script d'inici intenta carregar els mňduls del ratolí USB."
-
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Configuració del LILO/Grub"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuració del tipus d'arrencada"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Ara que ja teniu configurada la connexió a Internet,\n"
-#~ "podeu configurar l'ordinador per tal que la comparteixi.\n"
-#~ "Nota: per configurar una xarxa d'ŕrea local (LAN), us cal un adaptador de "
-#~ "xarxa dedicat.\n"
-#~ "\n"
-#~ "Voleu configurar la connexió a Internet compartida?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Benvingut a la utilitat de compartició de la connexió a Internet!"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependčncies automŕtiques"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configura el LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Crea un disquet d'arrencada"
-
-#~ msgid "Choice"
-#~ msgstr "Elecció"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "aurora horitzontal amb bon aspecte"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "aurora vertical tradicional"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ " chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ " you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ " your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ " specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ " present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ " typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ " select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ " should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Ara podeu seleccionar diverses opcions per al vostre sistema.\n"
-#~ "\n"
-#~ "* Utilització de l'optimització del disc dur: Aquesta opció pot millorar "
-#~ "el\n"
-#~ "rendiment del disc dur, perň és només per a usuaris avançats. Alguns "
-#~ "xips\n"
-#~ "amb errors poden fer malbé les vostres dades, així que aneu amb compte. "
-#~ "El\n"
-#~ "nucli inclou una \"llista negra\" d'unitats i jocs de xips, perň, si "
-#~ "voleu\n"
-#~ "evitar-vos sorpreses desagradables, no activeu aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Selecció d'un nivell de seguretat: Podeu escollir un nivell de\n"
-#~ "seguretat per al sistema. Si us plau, consulteu el manual per a més\n"
-#~ "informació. Bŕsicament, si no n'esteu segur, trieu l'opció "
-#~ "predeterminada.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Si cal, indicació de la mida exacta de la RAM: malauradament, no hi "
-#~ "cap\n"
-#~ "mčtode estŕndard per preguntar al BIOS la quantitat de RAM que hi ha a\n"
-#~ "l'ordinador. Per tant, és possible que el Linux no pugui detectar\n"
-#~ "correctament la quantitat de RAM instalˇlada. Si és aquest el cas, en "
-#~ "podeu\n"
-#~ "indicar aquí la quantitat correcta, perň penseu que una diferčncia de 2 o "
-#~ "4\n"
-#~ "MB entre la memňria detectada i la memňria real és normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Muntatge automŕtic de suports extraďbles: Si preferiu no haver\n"
-#~ "de muntar manualment les unitats extraďbles (CD-ROM, disquet, Zip)\n"
-#~ "escrivint \"mount\" i \"umount\", seleccioneu aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Neteja de \"/tmp\" en cada arrencada: si voleu suprimir tots els "
-#~ "fitxers\n"
-#~ "i directoris que hi ha emmagatzemats a \"/tmp\" quan arranqueu el "
-#~ "sistema,\n"
-#~ "seleccioneu aquesta opció.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Habilitació de BlocNum a l'inici: Si voleu que BlocNum s'habiliti "
-#~ "després\n"
-#~ "de l'arrencada, seleccioneu aquesta opció. Tingueu en compte que no heu\n"
-#~ "d'habilitar aquesta opció en portŕtils i que BlocNum pot funcionar o pot "
-#~ "no\n"
-#~ "funcionar sota X."
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Si us plau, tingueu pacičncia; la configuració del correu encara no estŕ "
-#~ "implementada."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Benvingut a l'Auxiliar de configuració de la xarxa.\n"
-#~ "Quins components voleu configurar?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Accés a Internet/xarxa"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Miscelˇlŕnia"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Preguntes diverses"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "No es pot utilitzar supermount en un nivell d'alta seguretat"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "Atenció: EN AQUEST NIVELL DE SEGURETAT NO ES POT ENTRAR COM A ROOT A LA "
-#~ "CONSOLA!\n"
-#~ "Si voleu ser root, heu d'entrar com a usuari i aleshores utilitzar \"su"
-#~ "\".\n"
-#~ "En general, no espereu utilitzar l'ordinador per a altre cosa que com a "
-#~ "servidor.\n"
-#~ "Esteu avisat."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Aneu amb compte; si teniu BlocNúm habilitat, moltes tecles donaran\n"
-#~ "números en comptes de lletres (p.ex., si premeu la `p' obtindreu un `6')"
-
-#~ msgid "not connected"
-#~ msgstr "sense connexió"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Aplicacions científiques"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Servidor, Fitxer/Impressió/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Servidor, DNS/DHCP "
-
-#~ msgid "First DNS Server"
-#~ msgstr "Servidor DNS primari"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Servidor DNS secundari"
-
-#~ msgid "using module"
-#~ msgstr "s'estŕ utilitzant el mňdul"
-
-#~ msgid "Development, Database"
-#~ msgstr "Desenvolupament, base de dades"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Desenvolupament, entorn integrat"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Desenvolupament, eines estŕndard"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Avís:\n"
-#~ "Si apliquu els canvis durant l'execució, és possible que l'entorn X "
-#~ "caigui."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Si continueu, tancaré l'entorn %s"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Quin(s) carregador(s) d'arrencada voleu utilitzar?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Disquet d'instalˇlació automŕtica"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Voleu que intenti trobar un mňdem?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Configura una connexió per XDSI"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Inhabilita la connexió a Internet"
-
-#~ msgid "Configure local network"
-#~ msgstr "Configura la xarxa local"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configura la connexió a Internet / Configura la xarxa local"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "La xarxa local ja s'ha configurat.\n"
-#~ "Voleu:"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipulació de grŕfics"
-
-#~ msgid "Sciences"
-#~ msgstr "Cičncies"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programes de xat (IRC o missatgeria instantŕnia) com ara xchat, licq, "
-#~ "gaim, i eines de transferčncia de fitxers"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Instalˇlacions de comunicació"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Eines d'Internet"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clients de bases de dades i servidors (mysql i postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Desenvolupament C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Zona horŕria"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(pot malmetre les dades)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Habilita la tecla Bloc Num en iniciar"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Confirmeu la contrasenya"
-
-#~ msgid "default"
-#~ msgstr "predeterminat"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Amb quina finalitat utilitzeu el sistema?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Seleccioneu la mida que voleu instalˇlar"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Utilitza el diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personalitzada"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Esteu segur que sou un expert? \n"
-#~ "Aquí podreu fer coses molt potents, perň també perilloses.\n"
-#~ "\n"
-#~ "Us preguntaran coses com: ``Voleu utilitzar un fitxer d'ombres per a les "
-#~ "contrasenyes?'',\n"
-#~ "Sou capaç de respondre aquest tipus de preguntes?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Utilitza el fitxer d'ombra"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Utilitza les contrasenyes MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cerca"
-
-#~ msgid "Package"
-#~ msgstr "Paquet"
-
-#~ msgid "Tree"
-#~ msgstr "Arbre"
-
-#~ msgid "Sort by"
-#~ msgstr "Ordena per"
-
-#~ msgid "Category"
-#~ msgstr "Categoria"
-
-#~ msgid "Installed packages"
-#~ msgstr "Paquets instalˇlats"
-
-#~ msgid "Available packages"
-#~ msgstr "Paquets disponibles"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Mostra només les fulles"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandeix-ho tot"
-
-#~ msgid "Collapse all"
-#~ msgstr "Redueix-ho tot"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Afegeix la ubicació dels paquets"
-
-#~ msgid "Update location"
-#~ msgstr "Actualitza la ubicació"
-
-#~ msgid "Find Package"
-#~ msgstr "Cerca el paquet"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Cerca el paquet que conté el fitxer"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Commuta entre Instalˇlats i Disponibles"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "S'estan comprovant les dependčncies"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Ara es desinstalˇlaran els paquets següents"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Quin paquet esteu cercant"
-
-#~ msgid "No match"
-#~ msgstr "Cap coincidčncia"
-
-#~ msgid "No more match"
-#~ msgstr "Cap altra coincidčncia"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "Actualment, l'rpmdrake estŕ en el mode ``poca memňria''.\n"
-#~ "Ara tornaré a reiniciar l'rpmdrake per permetre la recerca de fitxers"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Quin fitxer esteu cercant?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Quč esteu cercant?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Introduďu un nom (p.ex. `extra', `comercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directori"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "No hi ha cap CD-ROM disponible (no hi ha res a /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "L'URL del directori que conté els RPM"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Per a FTP i HTTP, us cal introduir la ubicació de hdlist\n"
-#~ "Ha de ser relativa a l'URL superior"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Si us plau, trameteu la informació següent"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s ja és en ús"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "S'estŕ actualitzant la base dels RPM"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Ara s'eliminarŕ l'entrada %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "S'estan cercant les fulles"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Cal una mica de temps per cercar les fulles"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "He trobat una targeta XDSI:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Altres paďsos"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "A quin país us trobeu?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Mňdem Alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Mňdem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr ""
-#~ "Si el vostre mňdem adsl és un mňdem Alcatel, seleccioneu Alcatel. Si no, "
-#~ "ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "no utilitzis pppoe"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (important)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (molt bonic)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (bonic)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "A quin port sčrie estŕ connectat el vostre ratolí?"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, biblioteques, eines"
-
-#~ msgid "Czech"
-#~ msgstr "Txec"
-
-#~ msgid "Slovakian"
-#~ msgstr "Eslovac"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "No s'ha pogut instalˇlar el RPM d'ipchains amb l'urpmi."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "No s'ha pogut instalˇlar el RPM de dhcp amb l'urpmi."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "No s'ha pogut instalˇlar el RPM de linuxconf amb l'urpmi."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "No s'ha pogut instalˇlar el RPM de bind amb l'urpmi."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "No s'ha pogut instalˇlar el RPM de caching-nameserver amb l'urpmi"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Torna a configurar la xarxa local"
-
-#~ msgid ""
-#~ " Introduction\n"
-#~ "\n"
-#~ "The operating system and the different components available in the "
-#~ "Mandrake Linux distribution \n"
-#~ "shall be called the \"Software Products\" hereafter. The Software "
-#~ "Products include, but are not \n"
-#~ "restricted to, the set of programs, methods, rules and documentation "
-#~ "related to the operating \n"
-#~ "system and the different components of the Mandrake Linux distribution.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. License Agreement\n"
-#~ "\n"
-#~ "Please read carefully this document. This document is a license agreement "
-#~ "between you and \n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 Paris - France, which applies "
-#~ "to the Software Products.\n"
-#~ "By installing, duplicating or using the Software Products in any manner, "
-#~ "you explicitly \n"
-#~ "accept and fully agree to conform to the terms and conditions of this "
-#~ "License. \n"
-#~ "If you disagree with any portion of the License, you are not allowed to "
-#~ "install, duplicate or use \n"
-#~ "the Software Products. \n"
-#~ "Any attempt to install, duplicate or use the Software Products in a "
-#~ "manner which does not comply \n"
-#~ "with the terms and conditions of this License is void and will terminate "
-#~ "your rights under this \n"
-#~ "License. Upon termination of the License, you must immediately destroy "
-#~ "all copies of the \n"
-#~ "Software Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. The GPL License and Related Licenses\n"
-#~ "\n"
-#~ "The Software Products consist of components created by different persons "
-#~ "or entities. Most \n"
-#~ "of these components are governed under the terms and conditions of the "
-#~ "GNU General Public \n"
-#~ "Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-#~ "licenses allow you to use, \n"
-#~ "duplicate, adapt or redistribute the components which they cover. Please "
-#~ "read carefully the terms \n"
-#~ "and conditions of the license agreement for each component before using "
-#~ "any component. Any question \n"
-#~ "on a component license should be addressed to the component author and "
-#~ "not to MandrakeSoft.\n"
-#~ "The programs developed by MandrakeSoft S.A. are governed by the GPL "
-#~ "License. Documentation written \n"
-#~ "by MandrakeSoft S.A. is governed by a specific license. Please refer to "
-#~ "the documentation for \n"
-#~ "further details.\n"
-#~ "Some versions of the Software Products may contain components which are "
-#~ "not governed by the GPL \n"
-#~ "License or similar agreements. Each such component is then governed by "
-#~ "the terms and conditions \n"
-#~ "of its own specific license. Please read carefully and comply with such "
-#~ "specific licenses before \n"
-#~ "you install, use or redistribute the said components. Such licenses will "
-#~ "in general prevent the \n"
-#~ "transfer, duplication (except for backup purposes), redistribution, "
-#~ "reverse engineering, \n"
-#~ "de-assembly, \n"
-#~ "de-compilation or modification of the component. Any breach of agreement "
-#~ "will immediately terminate \n"
-#~ "your rights under the specific license. Unless the specific license terms "
-#~ "grant you such rights, \n"
-#~ "you usually cannot install the programs on more than one system, or adapt "
-#~ "it to be used on a \n"
-#~ "network. \n"
-#~ "In doubt, please contact directly the distributor or editor of the "
-#~ "component. Transfer to third \n"
-#~ "parties or copying of such components including the documentation is "
-#~ "usually forbidden.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Intellectual Property Rights\n"
-#~ "\n"
-#~ "All rights to the components of the Software Products belong to their "
-#~ "respective authors and are \n"
-#~ "protected by intellectual property and copyright laws applicable to "
-#~ "software programs.\n"
-#~ "MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-#~ "Products, as a whole or in \n"
-#~ "parts,\n"
-#~ "by all means and for all purposes.\n"
-#~ "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-#~ "MandrakeSoft S.A. All rights \n"
-#~ "are \n"
-#~ "reserved. The duplication is forbidden without prior written consent by "
-#~ "MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Limited Warranty\n"
-#~ "\n"
-#~ "The Software Products and attached documentation are provided \"as is\", "
-#~ "with no warranty, to the \n"
-#~ "extent permitted by law. Should the Software Products be defective, "
-#~ "MandrakeSoft S.A. will at its \n"
-#~ "own will either replace the Software Products, or reimburse the paid "
-#~ "fee.\n"
-#~ "This limited warranty is void if you fail to comply to the "
-#~ "recommendations, instructions and \n"
-#~ "conditions \n"
-#~ "of use listed in the documentation or license agreements of the Software "
-#~ "Products.\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. will in no "
-#~ "circumstances be liable for any \n"
-#~ "special, \n"
-#~ "incidental, direct or indirect damages whatsoever (including without "
-#~ "limitation damages for loss of \n"
-#~ "business, interruption of business, financial loss, legal fees and "
-#~ "penalties resulting from a court \n"
-#~ "judgement, or any other consequential loss) arising out of the use or "
-#~ "inability to use the \n"
-#~ "Software \n"
-#~ "Products, even if MandrakeSoft S.A. has been advised of the possibility "
-#~ "or occurance of such \n"
-#~ "damages.\n"
-#~ "\n"
-#~ "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN "
-#~ "SOME COUNTRIES\n"
-#~ "\n"
-#~ "To the extent permitted by law, MandrakeSoft S.A. or its distributors "
-#~ "will, in no circumstances, be \n"
-#~ "liable for any special, incidental, direct or indirect damages whatsoever "
-#~ "(including without \n"
-#~ "limitation \n"
-#~ "damages for loss of business, interruption of business, financial loss, "
-#~ "legal fees and penalties \n"
-#~ "resulting from a court judgement, or any other consequential loss) "
-#~ "arising out of the possession \n"
-#~ "and \n"
-#~ "use of software components or arising out of downloading software "
-#~ "components from one of \n"
-#~ "Mandrake Linux \n"
-#~ "sites which are prohibited or restricted in some countries by local "
-#~ "laws. This limited liability \n"
-#~ "applies to, but is not restricted to, the strong cryptography components "
-#~ "included in the Software \n"
-#~ "Products.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Governing Laws \n"
-#~ "\n"
-#~ "If any portion of this agreement is held void, illegal or inapplicable by "
-#~ "a court judgement, this \n"
-#~ "portion is excluded from this contract. You remain bound by the other "
-#~ "applicable sections of the \n"
-#~ "agreement.\n"
-#~ "The terms and conditions of this License are governed by the Laws of "
-#~ "France.\n"
-#~ "All disputes on the terms of this license will preferably be settled out "
-#~ "of court. As a last \n"
-#~ "resort, \n"
-#~ "the dispute will be referred to the appropriate Courts of Law of Paris - "
-#~ "France.\n"
-#~ "For any question on this document, please contact MandrakeSoft S.A., \n"
-#~ "43, rue d'Aboukir, 75002 Paris - France\n"
-#~ msgstr ""
-#~ " Introducció\n"
-#~ "\n"
-#~ "D'ara endavant, el sistema operatiu i els diferents components que "
-#~ "s'inclouen\n"
-#~ "a la distribució Mandrake Linux s'anomenaran els \"Productes de programari"
-#~ "\".\n"
-#~ "Els Productes de programari inclouen, perň no es limiten a, el conjunt "
-#~ "de\n"
-#~ "programes, mčtodes, regles i documentació relativa al sistema operatiu i "
-#~ "als\n"
-#~ "diferents components de la distribució Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "1. Acord de Llicčncia\n"
-#~ "\n"
-#~ "Si us plau, llegiu aquest document atentament. Aquest document és un "
-#~ "acord\n"
-#~ "de llicčncia entre vós i MandrakeSoft S.A., 43, rue d'Aboukir, 75002 "
-#~ "París,\n"
-#~ "França, que s'aplica als Productes de programari.\n"
-#~ "Pel fet d'instalˇlar, duplicar o utilitzar els Productes de programari, "
-#~ "en \n"
-#~ "qualsevol manera, accepteu i esteu totalment d'acord, de manera "
-#~ "explícita, en\n"
-#~ "sometre-us als termes i condicions d'aquesta Llicčncia. Si no esteu "
-#~ "d'acord amb\n"
-#~ "qualsevol part d'aquesta Llicčncia, no esteu autoritzat a instalˇlar, "
-#~ "duplicar\n"
-#~ "ni utilitzar els Productes de programari. Qualsevol intent d'instalˇlar,\n"
-#~ "duplicar o utilitzar els Productes de programari d'una manera no conforme "
-#~ "als\n"
-#~ "termes i condicions d'aquesta Llicčncia és invŕlid i conclourŕ els "
-#~ "vostres\n"
-#~ "drets sota aquesta Llicčncia. En concloure la Llicčncia, heu de destruir\n"
-#~ "immediatament totes les cňpies dels Productes de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "2. la Llicčncia GPL i Llicčncies relacionades\n"
-#~ "\n"
-#~ "Els Productes de programari són components creats per diferents persones "
-#~ "o\n"
-#~ "entitats. La majoria d'aquests components estan coberts pels termes i\n"
-#~ "condicions de la Llicčncia General Pública de GNU (d'ara endavant \"GPL"
-#~ "\"), o\n"
-#~ "de llicčncies similars. La majoria d'aquestes llicčncies us permeten "
-#~ "utilitzar,\n"
-#~ "duplicar, adaptar o redistribuir els components que cobreixen. Si us "
-#~ "plau,\n"
-#~ "llegiu atentament els termes i condicions de l'acord de llicčncia de "
-#~ "cada\n"
-#~ "component abans d'utilitzar-lo. Qualsevol pregunta sobre un component "
-#~ "s'ha\n"
-#~ "d'adreçar al seu autor i no a MandrakeSoft. Els programes desenvolupats "
-#~ "per\n"
-#~ "MandrakeSoft S.A. estan coberts per la Llicčncia GPL. La documentació "
-#~ "escrita\n"
-#~ "per MandrakeSoft S.A. estŕ coberta per una llicčncia específica. Si us "
-#~ "plau,\n"
-#~ "consulteu la documentació per a més informació. Algunes versions dels "
-#~ "Productes\n"
-#~ "de programari poden incloure components que no estiguin coberts per la\n"
-#~ "Llicčncia GPL o llicčncies similars; en aquest cas, cada un d'aquests\n"
-#~ "components estarŕ cobert pels termes i condicions de la seva prňpia "
-#~ "llicčncia\n"
-#~ "específica. Si us plau, llegiu atentament i respecteu aquestes "
-#~ "llicčncies\n"
-#~ "específiques abans d'instalˇlar, utilitzar o redistribuir els components\n"
-#~ "esmentats. En general, aquestes llicčncies impediran la transferčncia,\n"
-#~ "duplicació (excepte amb la finalitat de fer cňpies de seguretat),\n"
-#~ "redistribució, enginyeria inversa, desensamblatge, decompilació o "
-#~ "modificació\n"
-#~ "del component. Qualsevol ruptura de l'acord conclourŕ immediatament els "
-#~ "vostres\n"
-#~ "drets sota la llicčncia específica. Tret que els termes de la llicčncia\n"
-#~ "específica us ho autoritzin, normalment no podreu instalˇlar els "
-#~ "programes en\n"
-#~ "més d'un sistema ni adaptar-lo per al seu ús en xarxa. Si hi teniu "
-#~ "dubtes,\n"
-#~ "poseu-vos en contacte directament amb el distribuďdor o editor del "
-#~ "component.\n"
-#~ "Normalment, estŕ prohibida la transferčncia a terceres parts i la cňpia\n"
-#~ "d'aquests components, incloent la documentació.\n"
-#~ "\n"
-#~ "\n"
-#~ "3. Drets de propietat intelˇlectual\n"
-#~ "\n"
-#~ "Tots els drets dels components dels Productes de programari pertanyen als "
-#~ "seus\n"
-#~ "autors respectius i estan protegits per la propietat intelˇlectual i les "
-#~ "lleis\n"
-#~ "de copyright aplicables al programari. MandrakeSoft S.A. es reserva els "
-#~ "drets\n"
-#~ "de modificar o adaptar els Productes de programari, ja sigui parcialment "
-#~ "o\n"
-#~ "totalment, per tots els mitjans i per a totes les finalitats. \"Mandrake"
-#~ "\",\n"
-#~ "\"Mandrake Linux\" i els logotips associats son marques registrades de\n"
-#~ "MandrakeSoft S.A. Tots els drets reservats. Es prohibeix la duplicació "
-#~ "sense\n"
-#~ "consentiment previ per escrit de MandrakeSoft S.A.\n"
-#~ "\n"
-#~ "\n"
-#~ "4. Garantia limitada\n"
-#~ "\n"
-#~ "Els Productes de programari i la documentació que s'hi adjunta es "
-#~ "subministren\n"
-#~ "\"tal com són\", sense cap garantia, fins al punt permčs per la llei. En "
-#~ "cas\n"
-#~ "que els Productes de programari siguin defectuosos, MandrakeSoft S.A., a\n"
-#~ "criteri seu, decidirŕ si reemplaça els Productes de programari o si en\n"
-#~ "reemborsa el preu pagat. Aquesta garantia limitada és nulˇla si no "
-#~ "compliu les\n"
-#~ "recomanacions, instruccions i condicions d'ús que s'indiquen a la "
-#~ "documentació\n"
-#~ "o als acords de llicčncia dels Productes de programari. Fins al punt "
-#~ "permčs per\n"
-#~ "la llei, MandrakeSoft S.A. no serŕ, en cap circumstŕncia, responsable de "
-#~ "cap\n"
-#~ "dany especial, incidental, directe o indirecte (incloent, perň sense "
-#~ "limitar-se\n"
-#~ "a, danys per pčrdua de negocis, interrupció de negocis, pčrdues "
-#~ "financeres,\n"
-#~ "honoraris i multes legals que resultin per un judici i qualsevol altre "
-#~ "pčrdua\n"
-#~ "important) que resulti de l'ús o impossibilitat d'utilitzar els Productes "
-#~ "de\n"
-#~ "programari, fins i tot si s'ha notificat a MandrakeSoft S.A. la "
-#~ "possibilitat de\n"
-#~ "que es produeixin aquests danys.\n"
-#~ "\n"
-#~ "RESPONSABILITAT LIMITADA LLIGADA A LA POSESSIÓ O UTILITZACIÓ DE "
-#~ "PROGRAMARI PROHIBIT EN ALGUNES PAĎSOS\n"
-#~ "\n"
-#~ "Fins al put permčs per la llei, MandrakeSoft S.A. i els seus "
-#~ "distribuďdors no\n"
-#~ "seran, sota cap circumstŕncia, responsables de cap dany especial, "
-#~ "incidental,\n"
-#~ "directe o indirecte (incloent, perň sense limitar-se a, danys per pčrdua "
-#~ "de\n"
-#~ "negocis, interrupció de negocis, pčrdues financeres, honoraris i multes "
-#~ "legals\n"
-#~ "que resultin per un judici i qualsevol altre pčrdua important) que "
-#~ "resultin de\n"
-#~ "la possessió i ús de components de programari o de la descŕrrega de "
-#~ "components\n"
-#~ "de programari d'algun dels llocs web de Mandrake Linux que estiguin "
-#~ "prohibits o\n"
-#~ "restringits en alguns paďsos per lleis locals. Aquesta responsabilitat "
-#~ "limitada\n"
-#~ "s'aplica, perň no estŕ restringida a, els potents components de "
-#~ "criptografia\n"
-#~ "inclosos en els Productes de programari.\n"
-#~ "\n"
-#~ "\n"
-#~ "5. Lleis aplicables \n"
-#~ "\n"
-#~ "Si qualsevol part d'aquest acord és declarat nul, ilˇlegal o inaplicable "
-#~ "en un\n"
-#~ "judici, aquesta part s'exclou del contracte, perň seguiu obligat per les "
-#~ "altres\n"
-#~ "seccions aplicables de l'acord. Els termes i condicions d'aquesta "
-#~ "Llicčncia\n"
-#~ "estan coberts per les lleis de França. Preferiblement, tots els desacords "
-#~ "sobre\n"
-#~ "els termes d'aquesta Llicčncia es resoldran fora dels tribunals. Com a "
-#~ "últim\n"
-#~ "recurs, el plet es dirimirŕ en els tribunals de París, França.\n"
-#~ "Per a qualsevol pregunta sobre aquest document, poseu-vos en contacte "
-#~ "amb\n"
-#~ "MandrakeSoft S.A., 43, rue d'Aboukir, 75002 París, França.\n"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Es pot configurar el vostre ordinador per tal que comparteixi la connexió "
-#~ "a Internet.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "S'ha configurat tot.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Connecta't a Internet amb un mňdem normal"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Connecta't a Internet mitjançant XDSI"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Connecta't a Internet mitjançant DSL (o ADSL)"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Connecta't a Internet mitjançant cable"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Temps (en segons) d'inactivitat després del qual\n"
-#~ "penjarŕ (deixeu-ho en blanc per inhabilitar-ho)."
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Alemanya (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Quč voleu fer?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Instalˇla/Rescata"
-
-#~ msgid "Rescue"
-#~ msgstr "Rescata"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Quin tipus de partició voleu?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ " - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Escolliu \"Instalˇlació\" si no hi ha instalˇlada cap versió anterior de "
-#~ "GNU/Linux,\n"
-#~ "o si voleu utilitzar diverses distribucions o versions.\n"
-#~ "\n"
-#~ "Escolliu \"Rescat\" si voleu rescatar una versió anterior de\n"
-#~ "Mandrake Linux ja instalˇlada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ " - Recomanada: Si mai no heu instalˇlat el GNU/Linux,\n"
-#~ " escolliu aquesta opció.\n"
-#~ " - Personalitzada: Si esteu prou familiaritzat amb el GNU/Linux, podeu\n"
-#~ " triar l'ús principal del vostre ordinador. Consulteu-ne els detalls\n"
-#~ " més avall.\n"
-#~ "\n"
-#~ " - Per a experts: S'assumeix que domineu el GNU/Linux i voleu realitzar "
-#~ "una\n"
-#~ " instalˇlació altament personalitzada. Com en el cas del tipus\n"
-#~ " d'instalˇlació \"Personalitzada\", podreu seleccionar l'ús del "
-#~ "vostre\n"
-#~ " sistema.\n"
-#~ " Perň, si us plau, sobretot NO TRIEU AQUESTA OPCIÓ TRET QUE SAPIGUEU "
-#~ "QUČ ESTEU FENT!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m to set the mount point\n"
-#~ msgstr ""
-#~ "En aquest moment podeu decidir quina(es) partició(ns) voleu utilitzar\n"
-#~ "per instalˇlar el sistema Mandrake Linux, si és que ja es va(n)\n"
-#~ "definir (en una instalˇlació anterior del GNU/Linux o mitjançant una\n"
-#~ "altra eina de partició). En altres casos, s'han de definir les\n"
-#~ "particions del disc dur: aquesta operació consisteix en dividir el\n"
-#~ "disc dur de l'ordinador en ŕrees lňgiques separades.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si heu de crear noves particions, utilitzeu \"Assignació\n"
-#~ "automŕtica\" per crear particions per al GNU/Linux de manera automŕtica.\n"
-#~ "Podeu triar el disc on s'hi han de fer les particions fent clic a\n"
-#~ "\"hda\" per a la primera unitat IDE, \"hdb\" per a la segona, o\n"
-#~ "\"sda\" per a la primera unitat SCSI, i així successivament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Dues particions habituals són: la partició root (/), que és el punt\n"
-#~ "d'inici de la jerarquia de directoris del sistema de fitxers, i\n"
-#~ "/boot, que conté tots els fitxers necessaris per iniciar el sistema\n"
-#~ "operatiu quan s'arrenca l'ordinador per primer cop.\n"
-#~ "\n"
-#~ "\n"
-#~ "Donat que aquest procés sol ser irreversible, la partició d'un disc\n"
-#~ "és sovint un procés que espanta als usuaris sense experičncia, perň\n"
-#~ "el DiskDrake simplifica molt aquest procés. Consulteu la documentació\n"
-#~ "i preneu-vos tant temps com sigui necessari abans de realitzar la\n"
-#~ "partició.\n"
-#~ "\n"
-#~ "Podeu accedir a qualsevol opció mitjançant el teclat: desplaceu-vos per "
-#~ "les particions amb el tabulador i les fletxes amunt i avall. Quan se "
-#~ "selecciona una partició, podeu utilitzar:\n"
-#~ "\n"
-#~ "- Ctrl-c per crear una nova partició (quan se selecciona una partició "
-#~ "buida)\n"
-#~ "\n"
-#~ "- Ctrl-d per suprimir una partició\n"
-#~ "\n"
-#~ "- Ctrl-m per definir el punt de muntatge\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Cal formatar les particions que s'acaben de definir per poder-les\n"
-#~ "utilitzar ('formatar' significa 'crear un sistema de fitxers').\n"
-#~ "En aquest punt podeu, si voleu, tornar a formatar particions\n"
-#~ "existents per eliminar les dades que contenen. Nota: no és\n"
-#~ "necessari tornar a formatar les particions existents, especialment\n"
-#~ "si contenen fitxers o dades que voleu conservar.\n"
-#~ "Els directoris que es solen conservar són /home i /usr/local."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Ara s'estan instalˇlant els paquets seleccionats. Aquesta operació\n"
-#~ "trigarŕ pocs minuts, tret que hagueu escollit actualitzar un\n"
-#~ "sistema existent; en aquest cas trigarŕ més temps, fins i tot\n"
-#~ "abans que s'iniciď la instalˇlació."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Si el DrakX no ha pogut trobar el ratolí, o si voleu comprovar quč\n"
-#~ "ha fet, a la part superior apareixerŕ la llista de ratolins.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si esteu d'acord amb els parŕmetres del DrakX, feu clic a 'D'acord'.\n"
-#~ "Si no, escolliu, al menú superior, el tipus de ratolí que us sembli més "
-#~ "semblant al vostre.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si es tracta d'un ratolí sčrie, també us caldrŕ indicar al DrakX a\n"
-#~ "quin port sčrie estŕ connectat."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "Aquesta secció estŕ dedicada a la configuració d'una xarxa local\n"
-#~ "(LAN) o d'un mňdem.\n"
-#~ "\n"
-#~ "Escolliu \"LAN local\" i el DrakX intentarŕ trobar un adaptador\n"
-#~ "Ethernet al vostre ordinador. El sistema trobarŕ i inicialitzarŕ\n"
-#~ "automŕticament els adaptadors PCI.\n"
-#~ "No obstant aixň, si el vostre perifčric és ISA, la detecció\n"
-#~ "no funcionarŕ, i us caldrŕ escollir un programa de control a la\n"
-#~ "llista que apareixerŕ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Com en el cas dels adaptadors SCSI, podeu deixar que, d'entrada,\n"
-#~ "el programa de control comprovi l'adaptador; si no ho feu així, us\n"
-#~ "caldrŕ especificar les opcions del programa de control que haureu\n"
-#~ "d'anar a buscar a la documentació del vostre maquinari.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si instalˇleu un sistema Mandrake Linux en un ordinador que forma\n"
-#~ "part d'una xarxa existent, l'administrador de la xarxa us haurŕ de\n"
-#~ "facilitar la informació necessŕria (l'adreça IP, la submŕscara de\n"
-#~ "xarxa i el nom de l'ordinador central). Si esteu configurant una\n"
-#~ "xarxa privada, com ara a casa, haureu d'escollir les adreces.\n"
-#~ "\n"
-#~ "\n"
-#~ "Escolliu \"Marcatge amb mňdem\" i es configurarŕ la connexió a\n"
-#~ "Internet amb un mňdem. El DrakX intentarŕ trobar el mňdem, perň,\n"
-#~ "si no se'n surt, us caldrŕ seleccionar el port sčrie al qual estŕ\n"
-#~ "connectat."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "El GNU/Linux pot treballar amb molts tipus d'impressores. Per a cada\n"
-#~ "un d'aquests tipus, perň, cal una configuració diferent. Tingueu\n"
-#~ "en compte, perň, que l'spooler utilitza 'lp' com a nom d'impressora\n"
-#~ "per defecte, de manera que heu de tenir una impressora amb aquest nom.\n"
-#~ "No obstant aixň, podeu donar diferents noms a una impressora, separant-\n"
-#~ "los amb el carŕcter '|'. D'aquesta manera, si voleu donar-li un nom més\n"
-#~ "aclaridor només us caldrŕ indicar-lo en primer lloc, p.ex. \"La meva\n"
-#~ "impressora|lp\".\n"
-#~ "La impressora que contingui \"lp\" al(s) nom(s) serŕ la impressora per\n"
-#~ "defecte\n"
-#~ "\n"
-#~ "\n"
-#~ "Si la vostra impressora estŕ connectada directament a l'ordinador,\n"
-#~ "seleccioneu \"Impressora local\". Haureu d'indicar a quin port\n"
-#~ "estŕ connectada i seleccionar-ne el filtre corresponent.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora que es troba a un ordinador Unix\n"
-#~ "remot, seleccioneu \"lpd remot\". Per poder-la fer funcionar no\n"
-#~ "cal cap nom d'usuari ni contrasenya, perň us caldrŕ saber el nom\n"
-#~ "de la cua d'impressió del servidor remot.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si voleu accedir a una impressora SMB (és a dir, una impressora\n"
-#~ "que es troba a un ordinador remot amb Windows 9x/NT), per poder-ho\n"
-#~ "fer haureu d'indicar el seu nom SMB (que no és el seu nom TCP/IP)\n"
-#~ "i possiblement la seva adreça IP, nom d'usuari, grup de treball,\n"
-#~ "contrasenya, i, evidentment, el nom de la impressora. El mateix\n"
-#~ "per a una impressora NetWare, perň en aquest cas no us caldrŕ la\n"
-#~ "informació del grup de treball."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "És molt recomanable que respongueu \"Sí\" aquí. Si més endavant\n"
-#~ "instalˇleu Microsoft Windows, sobreescriurŕ el sector d'arrencada.\n"
-#~ "Tret que hagueu fet el disc d'arrencada com es\n"
-#~ "recomana, ja no podreu tornar a arrencar el GNU/Linux."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Moveu la bola!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Voleu descartar els canvis?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "De quin tipus és el vostre ratolí?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Resolucions automŕtiques"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Per saber quines resolucions estan disponibles, en provaré algunes.\n"
-#~ "La pantalla parpellejarŕ...\n"
-#~ "Ho podeu desactivar si voleu; sentireu un avís sonor quan estigui llest"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Puc mirar de trobar les resolucions disponibles (p.ex. 800x600).\n"
-#~ "De vegades, perň, aixň pot penjar l'ordinador.\n"
-#~ "Us hi voleu arriscar?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "No s'han trobat modes vŕlids\n"
-#~ "Intenteu-ho amb una altra targeta de vídeo o monitor"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Recerca automŕtica de resolucions"
-
-#~ msgid "dhcpd"
-#~ msgstr "dhcpd"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB Mouse"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB Mouse (2 botons)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB Mouse (3 o més botons)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB Mouse"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB Mouse (2 botons)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB Mouse (3 o més botons)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus Mouse"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus Mouse"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus Mouse"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB Mouse (3 o més botons)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A o superior (sčrie)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (sčrie)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (sčrie)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (sčrie)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Generic Mouse (sčrie)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Compatible Microsoft (sčrie)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Ratolí Generic de 3 botons (sčrie)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Ratolí Kensington Thinking (sčrie)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr ""
-#~ "Necessito configurar el vostre adaptador de xarxa por poder connectar a "
-#~ "Internet."
-
-#~ msgid "nfs mount failed"
-#~ msgstr "ha fallat el muntatge de l'nfs"
-
-#~ msgid "Socket"
-#~ msgstr "Sňcol"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "El DrakX generarŕ els fitxers de configuració tant per a l'XFree 3.3 com "
-#~ "per a l'Xfree 4.0.\n"
-#~ "Per defecte, s'utilitza el servidor 4.0, tret que no funcioni per a la "
-#~ "vostra targeta.\n"
-#~ "\n"
-#~ "Voleu conservar l'Xfree 3.3?"
-
-#~ msgid "tie"
-#~ msgstr "llaç"
-
-#~ msgid "brunette"
-#~ msgstr "morena"
-
-#~ msgid "girl"
-#~ msgstr "noia"
-
-#~ msgid "woman-blond"
-#~ msgstr "dona-rossa"
-
-#~ msgid "automagic"
-#~ msgstr "automagic"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Criptogrŕfic"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Encarrega't del disc dur"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "No configuris la xarxa"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Voleu configurar la xarxa local per al vostre sistema?"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Us han donat un nom d'ordinador central?"
-
-#~ msgid "Show less"
-#~ msgstr "Mostra'n menys"
-
-#~ msgid "Show more"
-#~ msgstr "Mostra'n més"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "URI per a la impressora local"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "URI per a la impressora de xarxa"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Dispositiu de la impressora local (URI)"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(note that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "A quin dispositiu URI estŕ connectada la vostra impressora?\n"
-#~ "(tingueu en compte que parallel:/dev/lp0 equival a LPT1:)"
-
-#~ msgid "Network Printer Options (URI)"
-#~ msgstr "Opcions de la impressora de xarxa (URI)"
-
-#~ msgid ""
-#~ "Choose the right Device URI for a network printer or a local file. "
-#~ "Examples:\n"
-#~ " file:/path/to/filename.prn\n"
-#~ " http://hostname:631/ipp/port1\n"
-#~ " ipp://hostname/ipp/port1\n"
-#~ " lpq://hostname/queue\n"
-#~ " socket://hostname\n"
-#~ " socket://hostname:9100"
-#~ msgstr ""
-#~ "Seleccioneu l'URI de dispositiu correcte per a una impressora de xarxa o "
-#~ "un fitxer local. Exemples:\n"
-#~ " file:/camí/al/nomdefitxer.prn\n"
-#~ " http://ordinadorcentral:631/ipp/port1\n"
-#~ " ipp://ordinadorcentral/ipp/port1\n"
-#~ " lpq://ordinadorcentral/cua\n"
-#~ " socket://ordinadorcentral\n"
-#~ " socket://ordinadorcentral:9100"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "Especificació de la xarxa d'ŕrea local"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "Ara podeu decidir quina xarxa de classe C voleu utilitzar.\n"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "Connexió a Internet compartida: configuració de %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Ara es configurarŕ la interfície següent:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#~ msgid "Everything configured!"
-#~ msgstr "S'ha configurat tot!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Quina és la disposició del vostre teclat?"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Voleu que intenti trobar targetes PCMCIA?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Voleu que intenti trobar els dispositius %s?"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr ""
-#~ "Voleu configurar el marcatge amb xarxa per mňdem per al vostre sistema?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Voleu que intenti trobar dispositius PCI?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "S'estŕ cercant la partició arrel."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr ""
-#~ "%s: Aquesta partició no és arrel; si us plau, seleccioneu-ne una altra."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Si us plau, seleccioneu una partició per utilitzar-la com a arrel."
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "No teniu cap partició de Windows!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "No teniu prou espai per al Lnx4win"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Benvingut al LILO, la utilitat que us permet triar el sistema operatiu!\n"
-#~ "\n"
-#~ "Per obtenir una llista de les eleccions possibles, premeu <TAB>.\n"
-#~ "\n"
-#~ "Per carregar-ne una, escriviu-ne el nom i premeu <INTRO> o espereu %d "
-#~ "segons\n"
-#~ "fins a l'arrencada predeterminada.\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Benvingut al SILO, la utilitat que us permet triar el sistema operatiu!\n"
-#~ "\n"
-#~ "Per obtenir una llista de les eleccions possibles, premeu <TAB>.\n"
-#~ "\n"
-#~ "Per carregar-ne una, escriviu-ne el nom i premeu <INTRO> o espereu %d "
-#~ "segons\n"
-#~ "fins a l'arrencada predeterminada.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "Opcions principals del SILO"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Aquestes són les entrades següents del SILO.\n"
-#~ "Podeu afegir-ne algunes més o canviar-ne les existents."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Aquesta etiqueta ja estŕ en ús"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "Ha fallat la instalˇlació del SILO. S'ha produďt l'error següent:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
-#~ "to use, it will insert it (them) automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "En primer lloc, el DrakX intentarŕ trobar un o més adaptadors SCSI\n"
-#~ "PCI. Si en troba, i sap quin(s) programa(es) de control utilitzar,\n"
-#~ "l'inserirŕ o els inserirŕ automŕticament.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si el vostre adaptador SCSI és una targeta ISA, o si és PCI perň\n"
-#~ "el DrakX no sap amb quin programa de control ha d'utilitzar-la, o\n"
-#~ "si no teniu cap adaptador SCSI, se us preguntarŕ si en teniu un o\n"
-#~ "no. Si no en teniu cap, respongueu \"No\". Si en teniu un o més,\n"
-#~ "respongueu \"Sí\". Apareixerŕ una llista de programes de control,\n"
-#~ "de la qual n'haureu de triar un.\n"
-#~ "\n"
-#~ "\n"
-#~ "Un cop hagueu triat el programa de control, el DrakX us preguntarŕ\n"
-#~ "si voleu establir-ne les opcions. Primer, perň, deixeu que el\n"
-#~ "programa de control explori el maquinari: normalment funciona bé.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no, no oblideu la informació sobre el vostre maquinari que\n"
-#~ "pugueu aconseguir a la documentació o al Windows (si el teniu al\n"
-#~ "sistema), com aconsella la guia d'instalˇlació. Aquestes són les\n"
-#~ "opcions que haureu de proporcionar al programa de control."
-
-#~ msgid "Shutting down"
-#~ msgstr "S'estŕ tancant l'ordinador"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "S'han trobat alguns tipus de lletra \"true type\" del Windows a "
-#~ "l'ordinador.\n"
-#~ "Voleu utilitzar-les? Assegureu-vos que esteu autoritzat a utilitzar-les "
-#~ "sota Linux."
-
-#~ msgid "useless"
-#~ msgstr "inútil"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Escolliu \"Instalˇla\" si no hi ha instalˇlada cap versió anterior de "
-#~ "Linux,\n"
-#~ "o si voleu utilitzar diverses distribucions o versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Escolliu \"Actualització\" si voleu actualitzar una versió anterior de\n"
-#~ "Mandrake Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) 6.0 (Venus),\n"
-#~ "6.1 (Helios), Gold 2000 o 7.0 (Air)."
-
-#~ msgid ""
-#~ "(a user ``mandrake'' with password ``mandrake'' has been automatically "
-#~ "added)"
-#~ msgstr ""
-#~ "(s'ha afegit automŕticament un usuari ``mandrake'' amb contrasenya "
-#~ "``mandrake'')"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Voleu utilitzar el LILO?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Ara podeu seleccionar els paquets que voleu instalˇlar.\n"
-#~ "\n"
-#~ "\n"
-#~ "En primer lloc, podeu seleccionar el grup del paquet a instalˇlar\n"
-#~ "o actualitzar. Després, podeu seleccionar més paquets segons la\n"
-#~ "mida total que voleu seleccionar.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si treballeu amb el mode expert, podeu seleccionar els paquets\n"
-#~ "individualment.\n"
-#~ "Tingueu en compte, perň, que alguns paquets necessiten que altres\n"
-#~ "també estiguin instalˇlats.\n"
-#~ "Aixň s'anomena 'dependčncia de paquets'. Els paquets que\n"
-#~ "seleccioneu, i els que aquests necessitin, es seleccionaran\n"
-#~ "automŕticament per a la instalˇlació. No és possible instalˇlar un\n"
-#~ "paquet sense instalˇlar-ne tots els dependents."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "El LILO (el carregador de Linux) pot arrencar el Linux i altres sistemes\n"
-#~ "operatius, que normalment es detecten correctament durant la "
-#~ "instalˇlació.\n"
-#~ "Si veieu que el vostre no s'ha detectat, ara podeu afegir-ne un o més.\n"
-#~ "\n"
-#~ "\n"
-#~ "Si no voleu que tothom pugui accedir a algun d'ells, podeu\n"
-#~ "eliminar-lo ara (caldrŕ un disc d'arrencada per arrencar-lo)."
-
-#~ msgid ""
-#~ "Now that you've selected desired groups, please choose \n"
-#~ "how many packages you want, ranging from minimal to full \n"
-#~ "installation of each selected groups."
-#~ msgstr ""
-#~ "Ara que ja heu seleccionat els grups desitjats, seleccioneu \n"
-#~ "quants paquets voleu, ordenant-los des de la instalˇlació mínima \n"
-#~ "fins a la instalˇlació completa de cadascun dels grups seleccionats."
-
-#~ msgid ""
-#~ "You need %dMB for a full install of the groups you selected.\n"
-#~ "You can go on anyway, but be warned that you won't get all packages"
-#~ msgstr ""
-#~ "Us calen %dMB per a una instalació completa dels grups que heu "
-#~ "seleccionat.\n"
-#~ "Podeu continuar igualment, perň tingueu en compte que no tindreu tots els "
-#~ "paquets"
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Escolliu un altre CD per instalˇlar"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Seleccioneu:\n"
-#~ "\n"
-#~ " - Recomanada: Si mai no heu instalˇlat el Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Personalitzada: Si esteu familiaritzat amb el Linux, podreu\n"
-#~ "triar l'ús del sistema instalˇlat entre Normal, Desenvolupament o\n"
-#~ "Servidor. Trieu \"Normal\" per a una instalˇlació per a un ús\n"
-#~ "general del vostre ordinador, \"Desenvolupament\" si utilitzareu\n"
-#~ "l'ordinador principalment per a desenvolupament de programari,\n"
-#~ "o \"Servidor\" si voleu instalˇlar un servidor convencional (per\n"
-#~ "a correu, impressions...).\n"
-#~ "\n"
-#~ "\n"
-#~ " - Per a experts: Si domineu el GNU/Linux i voleu realitzar una\n"
-#~ "instalˇlació totalment personalitzada, aquest és el vostre\n"
-#~ "tipus d'instalˇlació. Podreu seleccionar l'ús del vostre sistema\n"
-#~ "com a \"Personalitzada\"."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "S'estan descarregant els paquets criptogrŕfics"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "Configura el SCSI"
-
-#~ msgid "Installation CD Nr %s"
-#~ msgstr "CD d'instalˇlació Nr %s"
-
-#~ msgid ""
-#~ "Update installation image!\n"
-#~ "\n"
-#~ "Ask your system administrator or reboot to update your installation image "
-#~ "to include\n"
-#~ "the Cd-Rom image labelled \"%s\". Press Ok if image has been updated or "
-#~ "press Cancel\n"
-#~ "to avoid installation from this Cd-Rom image."
-#~ msgstr ""
-#~ "Actualitzeu la imatge de la instalˇlació!\n"
-#~ "\n"
-#~ "Consulteu a l'administrador del sistema o torneu a arrencar per "
-#~ "actualitzar\n"
-#~ "la imatge de la instalˇlació per incloure la imatge en CD-ROM etiquetada "
-#~ "com\n"
-#~ "\"%s\". Premeu D'acord si la imatge s'ha actualitzat o premeu Cancelˇla "
-#~ "per\n"
-#~ "no fer la instalˇlació des d'aquesta imatge en Cd-ROM."
-
-#~ msgid "Which language do you want?"
-#~ msgstr "Quin idioma voleu?"
-
-#~ msgid "Hurt me plenty"
-#~ msgstr "Fes-me molt de mal"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Quina utilització voleu?"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Instalˇlació o actualització"
-
-#~ msgid "Enter a floppy (all data will be lost)"
-#~ msgstr ""
-#~ "Inseriu un disquet a la unitat\n"
-#~ "(Se'n perdran totes les dades)"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Ara s'instalˇlaran %d MB. Podeu triar instalˇlar més programes"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "S'han escollit massa paquets: %dMB no cap a %dMB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Fitxer d'inici rŕpid %s incorrecte (ha fallat %s)"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Mida: %s MB"
-
-#~ msgid "US Keyboard"
-#~ msgstr "Teclat EU"
-
-#~ msgid "resizing"
-#~ msgstr "s'estŕ canviant la mida"
-
-#~ msgid "changing type of"
-#~ msgstr "s'estŕ canviant el tipus de"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Després de %s partició %s,"
-
-#~ msgid "linear"
-#~ msgstr "lineal"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "Lineal (necessari per a algunes unitats SCSI)"
-
-#~ msgid "beginner"
-#~ msgstr "principiant"
-
-#~ msgid "developer"
-#~ msgstr "desenvolupador"
-
-#~ msgid "Password:"
-#~ msgstr "Contrasenya:"
-
-#~ msgid "User name:"
-#~ msgstr "Nom d'usuari:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "No s'ha pogut crear un disquet d'arrencada HTP.\n"
-#~ "Potser us caldrŕ reiniciar la instalˇlació i introduir \"%s\" a "
-#~ "l'indicador"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Cal reiniciar la instalˇlació amb els nous parŕmetres"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Cal reiniciar la instalˇlació arrencant des del disquet"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Introduďu un disquet per una arrencada habilitada per a HTP\n"
-#~ "(es perdran totes les dades del disquet)"
-
-#~ msgid ""
-#~ "Linux does not yet fully support ultra dma 66.\n"
-#~ "As a work-around i can make a custom floppy giving access the hard drive "
-#~ "on ide2 and ide3"
-#~ msgstr ""
-#~ "El Linux encara no suporta completament l'ultra dma 66.\n"
-#~ "Com a alternativa, puc fer un disquet personalitzat que doni accés a tot "
-#~ "el disc dur a ide2 i ide3"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Ja existeix una entrada %s"
-
-#~ msgid "Installation CD Nr 1"
-#~ msgstr "CD d'instalˇlació Nr 1"
-
-#~ msgid "Local LAN"
-#~ msgstr "LAN local"
diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
deleted file mode 100644
index 3b88dd7d4..000000000
--- a/perl-install/share/po/cs.po
+++ /dev/null
@@ -1,12241 +0,0 @@
-# Czech messages for DrakX.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (C) 1999 MandrakeSoft
-# Vladimír Marek <vlmarek@volny.cz>, 2000
-# Radek Vybiral <Radek.Vybiral@vsb.cz>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 14:25GMT+0100\n"
-"Last-Translator: Radek Vybíral <Radek.Vybiral@vsb.cz>\n"
-"Language-Team: Czech <cs@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigurovat všechny monitory nezávisle"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Použít rozšíření Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurovat pouze kartu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Konfigurace dvou monitorů"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Váš systém podporuje zobrazení na dvou monitorech.\n"
-"Co chcete dělat?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafická karta"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Zvolte typ vaší grafické karty"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Zvolte X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Zvolte ovladač pro X server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Ovladač pro X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Které XFree by jste chtěli použít?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaše karta podporuje 3D akceleraci, ale pouze s XFree %s.\n"
-"Pokud použijete XFree %s, můžete na druhou stranu dosáhnout lepších výsledků "
-"ve 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "S XFree %s může vaše karta využít 3D hardwarové akcelerace."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s s hardwarovou 3D akcelerací"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"S XFree %s může vaše karta využít 3D hardwarové akcelerace.\n"
-" TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MŮŽE VÉST K NESTABILITĚ SYSTÉMU."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s s EXPERIMENTÁLNÍ 3D hardwarovou akcelerací"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaše karta podporuje 3D akceleraci, ale pouze s XFree %s,\n"
-"TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MŮŽE VÉST K NESTABILITĚ SYSTÉMU.\n"
-"Vaše karta je podporována i v XFree %s, kde může mít lepší podporu pro 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalační ovladač pro obrazovku)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Nastavení XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Kolik paměti je na vaší grafické kartě ?"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Zvolte možnosti pro daný X server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Zvolte typ svého monitoru"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva rozhodující parametry jsou: vertikální synchronizační frekvence, což je\n"
-"frekvence, kterou je obnovována celá obrazovka, a frekvence řádkové\n"
-" synchronizace (horiz. sync. rate), což je frekvence jakou jsou zobrazovány\n"
-"jednotlivé mikrořádky (scanline).\n"
-"\n"
-"Je VELMI DŮLEŽITÉ abyste nezvolili typ monitoru se schopnostmi vyššími než "
-"má\n"
-"váš monitor, protože byste si ho tím mohli poškodit. Jestliže si nejste "
-"jistí\n"
-"zvolte raději typ s nižšími schopnostmi."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontální(řádková) synchronizace"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikální(obrazovková) synchronizace"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor není nastaven"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafická karta ještě není nastavena"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Ještě nejsou zvolena rozlišení"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Chcete si vyzkoušet nastavení?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varování: na této grafické kartě je testování nebezpečné"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Vyzkoušet nastavení"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"zkuste změnit některé parametry"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Vyskytla se tato chyba:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Test skončí automaticky za %d sekund"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Je to správné nastavení?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Vyskytla se chyba, zkuste změnit některé parametry"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rozlišení"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Vyberte si rozlišení a barevnou hloubku"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafická karta: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Více"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Expertní režim"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Ukázat vše"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rozlišení"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Rozložení klávesnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ myši: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Přípojení myši: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontální frekvence monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikální frekvence monitoru: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafická karta: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikace grafické karty: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Paměť na gr. kartě: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Barevná hloubka: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozlišení: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ovladač: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Připravuji nastavení X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Co chcete dělat?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Změnit monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Změnit grafickou kartu"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Změnit parametry X Serveru"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Změnit rozlišení"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Zobrazit informace"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Znovu vyzkoušet nastavení X"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Konec"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachovat změny?\n"
-"Aktuální konfigurace je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Spouští se X"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Můžu nastavit váš počítač tak, aby automaticky spustil X při startu.\n"
-"Chcete aby počítač po zapnutí spustil grafický režim?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Pro aktivaci změn se prosím znovu přihlaste na %s"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Prosím odhlaste se a pak stiskněte Ctrl-Alt-Backspace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 barev (8 bitů)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisíc barev (15 bitů)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisíc barev (16 bitů)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliónů barev (24 bitů)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardy barev (32 bitů)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB nebo více"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Klasické VGA, 640x480 při 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 při 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Kompatibilní s 8514, 1024x768 při 87 Hz prokládaně (ne 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 při 87 Hz prokládaně, 800x600 při 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Lepší Super VGA, 800x600 při 60 Hz, 640x480 při 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Neprokládaná SVGA, 1024x768 při 60 Hz, 800x600 při 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Vysokofrekvenční SVGA, 1027x768 při 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multifrekvenční který umí 1280x1024 při 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multifrekvenční, který umí 1280x1024 při 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multifrekvenční, který umí 1280x1024 při 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor, který umí 1600x1200 při 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor, který umí 1600x1200 při 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "První sektor zaváděcího diskového oddílu"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "První sektor disku (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalace SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam chcete nainstalovat zaváděcí program?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalace LILO/Grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO s textovou nabídkou"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO s grafickou nabídkou"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Spuštění s DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Základní nastavení zaváděcího programu"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Zaváděcí program"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalace zaváděcího programu"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Startovací zařízení"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nefunguje se starým BIOSem)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktní"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktní"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Textový režim"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Prodleva před automatickým spuštěním"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Heslo"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Heslo (podruhé)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Omezení nastavení z příkazové řádky"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "omezení"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Vyčistit /tmp při každém startu"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pokud je třeba, upřesněte velikost paměti (nalezeno %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Povolit více profilů"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Zadejte velikost paměti v MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Volba ''Omezení nastavení z příkazové řádky'' je bezpředmětné bez hesla"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Zkuste to znovu, prosím"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Hesla nejsou shodná"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Úvodní zpráva"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Prodleva pro firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Prodleva při spuštění"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Povolit spuštění z CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Povolit zavaděč OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Výchozí OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Rozhodli jste se nainstalovat zavaděč systému na oddíl.\n"
-"To znamená, že již zavaděč na disku, ze kterého spouštíte systém nějaký je "
-"(např. System Commander).\n"
-"\n"
-"Ze kterého disku spouštíte systém?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tady jsou všechny záznamy.\n"
-"Můžete přidat další nebo změnit stávající."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Přidat"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Hotovo"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Změnit"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Jaký typ záznamu chcete přidat?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Jiný systém (SunOs...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Jiný systém (MacOs...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Jiný systém (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Obraz(image)"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Kořenový(root)"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Připojit"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Pro čtení i zápis"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabulka"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nejistý"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Značka"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Výchozí"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-velikost"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Bez Videa"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Odstranit záznam"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prázdná značka není povolena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Musíte zadat soubor s jádrem"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Musíte zadat kořenový oddíl"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Tato značka se již používá"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Našel jsem %s %s rozhraní"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Máte ještě nějaké jiné?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Máte nějaké %s rozhraní?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ano"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ukázat informace o hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaluji ovladač pro %s kartu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Který %s ovladač mám zkusit?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"V některých případech potřebuje ovladač %s pro svoji správnou funkci další\n"
-"informace, přestože normálně funguje i bez nich. Chtěli byste zadat\n"
-"nějaké doplňující možnosti, nebo raději necháte ovladač samostatně "
-"prozkoumat\n"
-"hardware vašeho počítače, aby získal informace které potřebuje? Zkoumání\n"
-"hardware může ve vyjímečných případech způsobit zamrznutí počítače, ale "
-"nemělo\n"
-"by v žádném případě způsobit jiné škody."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatické prozkoumání"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Zadejte možnosti"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Nyní lze zadat volby pro příslušný modul %s.\n"
-"Pozn.: každá adresa by měla být ve tvaru 0x např. '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nyní můžete poskytnout modulu %s další parametry.\n"
-"Volby se zadávají ve tvaru ''jméno=hodnota jméno2=hodnota2 ...''.\n"
-"Například, ''io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Volby modulu:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Spuštění modulu %s selhalo.\n"
-"Chcete to zkusit s jinými parametry?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "přístup k programům v X prostředí"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "přístup k rpm nástrojům"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "povolit \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "přístup k administrativním souborům"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(už byl přidán %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Toto heslo je příliš jednoduché"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Prosím zadejte uživatelské jméno"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Uživatelské jméno může obsahovat pouze malá písmena, čísla, '-' a '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Toto uživatelské jméno už bylo přidáno"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Přidat uživatele"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Zadejte uživatele\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Vytvořit uživatele"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Skutečné jméno"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Uživatelské jméno"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatické přihlášení"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Můžu nastavit váš počítač tak, aby automaticky přihlásil vybraného "
-"uživatele.\n"
-"Chcete použít tuto možnost?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Zvolte standardního uživatele :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si, který správce oken má být spouštěn:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Prosím zvolte si jazyk, který chcete používat."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Můžete si zvolit další jazyky, které budou dostupné po instalaci"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Všechno"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Povolit všem uživatelům"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Vlastní"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nesdílet"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Balíček %s musí být nainstalován. Chcete ho nainstalovat?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Nyní lze provést export přes NFS nebo Samba protokol. Který chcete"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Chybí potřebný balíček %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Chcete povolit uživatelům, aby si mohli sdílet adresáře ve svém domovském "
-"adresáři?\n"
-"Pokud to povolíte, uživatelům stačí pouze kliknout na \"Sdílet\" v "
-"aplikacích konqueror a nautilus.\n"
-"\n"
-"Lze také provést \"Vlastní\" povolení pro jednotlivé uživatele.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Zrušit"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Spustit userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Sdílení mezi uživateli používá skupinu \"fileshare\". \n"
-"Uživatele lze do této skupiny přidat pomocí nástroje userdrake."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dveře dokořán"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Slabá"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardní"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Vysoká"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Vyšší"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidní"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Tato úroveň musí být použita s rozmyslem. Sice můžete snadněji používat "
-"svůj\n"
-"systém, ale na druhou stranu je velmi citlivý: Nesmí být použit pro\n"
-"počítač připojený k Internetu. Pro přihlášení není zapotřebí žádné heslo."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Hesla jsou nyní aktivní, ale stále nedoporučuji použít tento počítač na síti."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Toto je standardní úroveň zabezpečení pro počítač, který je používán jako "
-"klient pro připojení k internetu."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Existují zde některá omezení a každou noc jsou spuštěny automatické testy."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"S touto bezpečnostní úrovní je možné používat počítač jako server.\n"
-"Bezpečnost je nyní dostatečná pro server s připojením mnoha klientů.\n"
-"Poznámka: pokud je počítač používán pouze jako klient pro připojení k "
-"Internetu, je lepší zvolit nižší úroveň."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Tato úroveň má vlastnosti předchozí úrovně, ale systém je úplně uzavřen.\n"
-"Zabezpečení je nastaveno na maximum."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Zvolte si úroveň zabezpečení"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Úroveň zabezpečení"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Použít libsafe pro servery"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Knihovna, které zabraňuje útokům proti přetečení bufferu nebo proti špatnému "
-"formátování řetězců."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Vita Vas %s, program pro start operacniho systemu!\n"
-"\n"
-"Vyberte si ze seznamu operacnich systemu nize nebo\n"
-"pockejte %d vterin pro automaticky start.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Vita Vas GRUB, program pro vyber operacniho systemu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Pro vyber polozek pouzijte klavesy %c a %c."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Stisknete ENTER pro start vybraného OS, 'e' pro upravu"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "spoustecich parametru, nebo 'c' pro prikazovou radku."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Vybrana polozka bude automaticky spustena za %d sekund."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "není dost místa v adresáři /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Pracovní plocha"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Nabídka Start"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Zaváděcí program nelze nainstalovat na oddíl %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nápověda zatím nedostupná.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Nastavení stylu zavádění"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "_Soubor"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Soubor/_Konec"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Novější zatříděný monitor "
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Novější monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradiční monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradiční Gtk+ monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Spustit Auroru při startu"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Režim Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Režim Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jako správce spouštění nyní používáte %s.\n"
-"Pokud chcete spustit průvodce nastavením, klikněte na Konfigurovat."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurovat"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systémový režim"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Spustit X-Window při startu"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, nechci automatické přihlášení"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ano, chci automatické přihlášení s tímto (uživatelem, desktopem)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "nelze otevřít /etc/inittab pro čtení: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut(y)"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Nelze provést sejmutí obrazovky před rozdělením disků"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Sejmuté obrazovvky budou dostupné po instalaci v adresáři %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francie"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgie"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Česká republika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Německo"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Řecko"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norsko"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Švédsko"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nizozemí"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Itálie"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Rakousko"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Spojené státy americké"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Zálohujte si nejdřív svá data, prosím"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Čtěte pozorně!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jestliže chcete používat aboot, musíte nechat volné místo na začátku disku\n"
-"(2048 sektorů stačí)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Chyba"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Průvodce"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Co uděláte ?"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Máte jeden veliký oddíl FAT\n"
-"(většinou používaný Microsoft Dos/Windows).\n"
-"Doporučuji vám nejprve zmenšit tento oddíl\n"
-"(klepněte na něj a potom na\n"
-"\"Změnit velikost\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Prosím klepněte na oddíl"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaily"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Žurnálovací FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOs"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Odkládací (swap)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prázdný"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Další"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Souborové systémy:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Vytvořit"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Změnit typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Místo toho použijte ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Smazat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Nejprve použijte ``Odpojit''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Tím že změníte typ oddílu %s přijdete o všechna jeho data"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Vyberte oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Vyberte jiný oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Konec"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Přepnout se do módu 'expert'"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Přepnout se do módu 'normální'"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Zpět"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Přesto chcete pokračovat?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Konec bez uložení"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Chcete skončit bez zapsání do tabulky oddílů?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcete uložit modifikaci souboru /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automaticky rozmístit"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Vše smazat"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informace o hardisku"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Všechny primární oddíly (partitions) jsou používány"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nemůžu přidat žádný další oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Abyste mohli mít více oddílů, musíte smazat jeden existující a na jeho "
-"místě\n"
-"vytvořit rozšířený(extended) oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Uložit tabulku oddílů"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Obnovit tabulku oddílů"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Záchrana tabulky oddílů"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Znovu načíst tabulku oddílů"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatické připojování pro vyjímatelná média"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Zvolit soubor"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Záložní tabulka oddílů nemá stejnou velikost\n"
-"Chcete přesto chcete pokračovat?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Varování"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Vložte disketu do mechaniky\n"
-"Všechna data na této disketě budou smazána"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pokouším se obnovit tabulku oddílů"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Podrobné informace"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Přípojný bod"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Volby"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Změnit velikost"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Přesunout"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formátovat"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Připojit"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Přidat do RAIDu"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Přidat do LVMu"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Odpojit"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Odebrat z RAIDu"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Odebrat z LVMu"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Změnit RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Použít loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Vytvořit nový oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Počáteční sektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Souborový systém: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Adresář připojení (mount point): "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Nastavení: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Odstranit soubor loopbacku?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Změnit typ oddílu"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Který souborový systém chcete použít?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Přepínám z ext2 na ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kam chcete připojit loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam chcete připojit zařízení %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nemůžu smazat přípojný bod, protože tento oddíl je používán pro loopback.\n"
-"Odstraňte nejprve loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Počítám hranice souborového systému fat"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Měním velikost"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Na tomto diskovém oddílu nelze měnit velikost"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Všechna data z tohoto oddílu by měla být zálohována"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Když změníte velikost oddílu %s, ztratíte tím všechna jeho data"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Zvolte novou velikost"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nová velikost v MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na který disk chcete oddíl přesunout?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na který sektor chcete oddíl přesunout?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Přesouvám"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Přesouvám oddíl..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Zvolte existující RAID pro přidání"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nový"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Zvolte existující LVM pro přidání"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Jméno pro LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Tento oddíl nemůže být použit pro loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Název souboru loopbacku:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Zadejte jméno souboru"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Soubor už je používán jiným loopbackem, zvolte si jiný"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Soubor už existuje. Mám ho použít?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Volby pro připojení"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Další"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "zařízení"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "úroveň"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Velikost bloku(chunk)"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Buďte opatrní: tato akce je nebezpečná."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Jaký typ diskového oddílu?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Promiňte, nemůžu povolit vytvoření /boot tak daleko na disku (na cylindru > "
-"1024).\n"
-"Buďto použijete LILO a nebude to fungovat, nebo nepoužijete LILO a tedy "
-"nepotřebujete /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Oddíl který jste zvolili jako kořenový (root - /) je na disku fyzicky za "
-"cylindrem 1024,\n"
-"a přitom nemáte /boot oddíl. Jestliže chcete použít správce bootu (boot "
-"manager),\n"
-"přidejte ještě /boot oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Zvolili jste softwarovou RAID oddíl jako kořenový oddíl (/).\n"
-"S tím se není schopný vypořádat žádný zaváděcí program bez použití oddílu\n"
-"/boot. Ujistěte se prosím, že tento oddíl máte."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Nová tabulka oddílů na disku %s bude zapsána!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby se změny uplatnily budete muset restartovat počítač"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Když naformátujete oddíl %s, ztratíte tím všechna jeho data"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formátuji"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formátuji soubor loopbacku %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formátuji oddíl %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Schovat soubory"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Přesunout soubory na nový diskový oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Adresář %s již obsahuje nějaká data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Přesunuji soubory na nový diskový oddíl"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopíruji %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Odstraňuji %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "oddíl %s je nyní rozpoznán jako %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Zařízení: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Písmeno v DOSu: %s (jenom odhad)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Typ: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Jméno: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Začátek: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorů"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Od cylindru %d do cylindru %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Naformátovaný\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nenaformátovaný\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Připojený\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback soubor(y): \n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Standardní startovací oddíl\n"
-" (Pro MS-DOS, ne pro LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Úroveň %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Velikost bloku(chunk) %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback soubor: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Tento oddíl je oddíl\n"
-"s ovladači, je lepší\n"
-"no nechat neporušený.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento speciální Boostrap\n"
-"oddíl je pro spuštění\n"
-"dalšího systému.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylindrů, %s hlav, %s sektorů\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informace: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM disky %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabulky oddílů: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na sběrnici %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Volby: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Klíč pro kryptovaný souborový systém"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Vyberte si kryptovací klíč pro souborový systém"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Tento klíč je příliš jednoduchý (musí být alespoň %d znaků dlouhý)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Kryptovací klíče se neshodují"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Kryptovací klíč"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Kryptovací klíč (znovu)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Změnit typ"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Prosím klepněte na zdroj"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Vyhledat servery"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formátování %s skončilo chybou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "nevím jak naformátovat %s na typ %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "připojení oddílu %s v adresáři %s selhalo"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "selhal běh fsck s návratovým kódem %d nebo signálem %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojování %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednoduchý"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "s /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nemůžete použít JFS pro oddíl menší než 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nemůžete použít ReiserFS pro oddíl menší než 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Přípojné body (mount points) musí začínat '/'"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Oddíl s přípojným bodem %s už existuje\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nelze použít LVM Logického disku na připojený bod %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adresář musí kromě kořenového souborového systému zůstat"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Pro tento přípojný bod potřebujete opravdový souborový systém (Ext2, "
-"ReiserFS)\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Nelze použít kryptovaný souborový systém na připojený bod %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Není dostatek místa pro automatické rozdělení disku"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nic nedělat"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Chyba při otevírání %s pro zápis: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Stala se chyba - nebylo nalezeno žádné zařízení na kterém by se daly "
-"vytvořit nové souborové systémy. Zkontrolujte prosím hardware"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemáte žádné oddíly!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux je víceuživatelský systém, což znamená, že každý uživatel může "
-"mít\n"
-"své vlastní nastavení, soubory atd. Více se dočtete v \"Příručce uživatele"
-"\".\n"
-"Na rozdíl od uživatele root, který se správcem počítače, uživatelé, kteří "
-"jsou\n"
-"zde vytvořeni, nemají oprávnění měnit nic kromě svých souborů a nastavení.\n"
-"Doporučuje se vytvořit účet pro minimálně jednoho regulérního uživatele.\n"
-"Tento účet se používá na všechny běžné úkoly. Ačkoliv je velmi praktické\n"
-"přihlašovat se každý den jako uživatel Root, je to také velmi nebezpečné!\n"
-"Jedna malá chyba může způsobit to, že celý operační systém nebude funkční.\n"
-"Pokud uděláte chybu jako normální uživatel, můžete přijít o soubory, ale "
-"nepoškodí\n"
-"se celý systém.\n"
-"\n"
-"Jako první zadejte reálné jméno. Není to povinné, takže můžete zadat co "
-"chcete\n"
-"a drakX použije první slovo jako uživatelské jméno, pod kterým se bude "
-"uživatel\n"
-"hlásit do systému. Je možné ho následně změnit. Dále se zadává heslo pro\n"
-"uživatele. Volba hesla pro normální uživatele sice není tak kritická jako\n"
-"pro správce, ale i tak se doporučuje nepodceňovat bezpečnost.\n"
-"\n"
-"Pokud kliknete na \"Přidat uživatele\", můžete tak přidávat uživatelů kolik\n"
-"potřebujete, např. své přátelé, účet pro otce či sestru. Pokud máte všechny\n"
-"uživatele vytvořeny, klikněte na \"Hotovo\". \n"
-"\n"
-"Kliknutím na tlačítko \"Rozšířené\" můžete pro nový účet změnit shell, "
-"který\n"
-"uživatel bude používat (výchozí je bash)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Každý oddíl vypsaný níže má: \"Jméno\", \"Velikost\".\n"
-"\n"
-"\"Jméno\" je složeno následovně: \"typ pevného disku\", \"číslo disku\",\n"
-"\"číslo oddílu\". (například \"hda1\").\n"
-"\n"
-"Pokud máte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud máte SCSI,\n"
-"označení bude \"sd\".\n"
-"\n"
-"\"Číslo disku\" je vždy písmeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE řadiči\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE řadiči\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE řadiči\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE řadiči\".\n"
-"\n"
-"Pro SCSI disky platí, že \"a\" je \"nejmenší SCSI ID\", \"b\" je \"druhé\n"
-"nejmenší SCSI ID\" atd."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Distribuce Mandrake Linux je složena z několika CD. Instalační program ví,\n"
-"na kterém disku je umístěn jaký soubor a v případě potřeby vysune CD a "
-"vyžádá\n"
-"si výměnu CD za jiné."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"V této chvíli je možné si vybrat, které programy chcete nainstalovat.\n"
-"Mandrake Linux obsahuje téměř tisíc balíčků s programy a určitě nebudete\n"
-"potřebovat všechny.\n"
-"\n"
-"Pokud instalujete z CDROM, budete nejprve dotázáni na to, jaká CD máte\n"
-"(pouze Expertní režim). Označte ty CD, která máte a která chcete použít \n"
-"pro instalaci. Po výběru klikněte na \"OK\".\n"
-"\n"
-"Balíčky jsou rozděleny do skupin, které odpovídají tomu, jak je nejčastěji\n"
-"počítač používán. Skupiny jsou umístěny do čtyřech sekcí:\n"
-"\n"
-" * \"Pracovní stanice\": pokud plánujete používat počítač převážně na\n"
-"běžnou práci, vyberte si z dalších skupin odpovídající balíčky.\n"
-"\n"
-" * \"Vývoj\": pokud budete na počítači programovat, můžete si z této\n"
-"sekce vybrat další skupiny.\n"
-"\n"
-" * \"Server\": pokud bude počítač provozován jako server, máte možnost\n"
-"vybrat si ty nejběžnější služby, které chcete nainstalovat.\n"
-"\n"
-" * \"Grafická prostředí\": pokud preferujete grafické prostředí, zde je\n"
-"nabídka několika prostředí, ze které si musíte vybrat nejméně jedno,\n"
-"aby bylo možné grafické prostředí nainstalovat.\n"
-"\n"
-"Pokud přejedete myší nad skupinou, objeví se krátký text, který vysvětluje,\n"
-"co je obsahem dané skupiny. Pokud nevyberete při instalaci žádnou skupinu,\n"
-"zobrazí se otázka na instalaci několika typů minimální instalace:\n"
-"\n"
-" * \"Podpora X\" Provede instalaci minimální podpory pro prostředí X-"
-"Window.\n"
-"\n"
-" * \"Se základní dokumentací\" Nainstaluje systém se základními programy a "
-"jejich dokumentací. Tento typ je vhodný pro instalaci serveru.\n"
-"\n"
-" * \"Minimální instalace\" Nainstaluje se opravdu nezbytné minimum aby bylo "
-"možné provozovat Linux z příkazové řádky. Instalace zabere asi 65MB.\n"
-"\n"
-"Pokud zatrhnete volbu \"Vlastní výběr balíčků\", zobrazí se seznam všech\n"
-"balíčků, které je možno nainstalovat. Je to dobré v tom případě, že chcete\n"
-"mít kontrolu nad tím, co se bude instalovat.\n"
-"\n"
-"Pokud jste spustili instalaci v režimu \"Aktualizace\", můžete zrušit výběr\n"
-"daných skupin, čímž zabráníte instalaci nových balíčků. To je užitečné\n"
-"pro případ opravy existujícího systému."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"V závislosti na tom, zda jste zvolili individuální výbět balíčků, nabídne\n"
-"se stromová struktura, obsahující všechny balíčky organizované do skupin.\n"
-"Při procházení stromu můžete vybrat jednotlivé balíčky nebo celé skupiny.\n"
-"\n"
-"Pokud vyberete balíček nebo skupinu, v pravé části se objeví popis.\n"
-"Pokud máte výběr hotový, klikněte na tlačítko \"Instalovat\", které spustí\n"
-"instalační proces. Doba trvání instalace závisí počtu balíčků a na "
-"rychlosti\n"
-"vašeho počítače. Zbývající čas je zobrazován na obrazovce, takže máte\n"
-"odhad na to, zda si stihnete dát šálek kávy. :-)\n"
-"\n"
-"Pokud mezi vybranými balíčky jsou serverové programy, zobrazí se dotaz na "
-"to,\n"
-"zda opravdu chcete tyto servery nainstalovat. V distribuci Mandrake Linux\n"
-"jsou tyto servery spuštěny při startu systému. I když v době vydání "
-"distribuce\n"
-"nejsou známy žádné bezpečnostní problémy, mohou se vyskytnout později.\n"
-"Pokud nevíte, k čemu jsou určeny některé serverové služby, klikněte na \"Ne"
-"\".\n"
-"Kliknutím na \"Ano\" se dané služby nainstalují a spustí při startu!\n"
-"\n"
-"Volba \"Automatické závislosti\" odstraňuje varovné hlášení, které se "
-"objeví\n"
-"vždy, když vyberete balíček, který má další závislosti a instalační program\n"
-"tak musí vybrat další potřebné balíčky.\n"
-"\n"
-"Malá ikonka diskety umožňuje nahrát již předtím vybraný seznam balíčků.\n"
-"Klikněte na ikonu a vložte disketu s uloženým výběrem. V posledním kroku\n"
-"bude návod, jak si tuto disketu vytvořit."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"V tomto kroku se provede nastavení připojení k internetu/síti. Pokud chcete\n"
-"připojit svůj počítač k místní síti nebo k internetu, klepněte na \"OK\"\n"
-"a spustí se automatická detekce síťové karty nebo modemu. Pokud tato\n"
-"detekce selže, odznačte při dalším pokusu \"Použít automatickou detekci"
-"\"Pokud nechcete nyní nastavit síť nebo to chcete provést později, "
-"jednoduše\n"
-"klepněte na tlačítko \"Zrušit\".\n"
-"Způsoby připojení jsou: tradiční modem, ISDN modem, ADSL spojení, kabelový\n"
-"modem a konečně klasické připojení do LAN sítě (Ethernet).\n"
-"\n"
-"Ujistěte se, že máte všechny dostupné informace pro připojení od svého\n"
-"poskytovatele připojení nebo od správce sítě. \n"
-"\n"
-"Více informací naleznete v příslušné kapitole v manuálu, nebo můžete systém\n"
-"nainstalovat a použít programy na konfiguraci připojení později.\n"
-"\n"
-"Pokud nemáte žádné připojení k internetu ani k místní síti, klepněte na\n"
-"\"Zrušit\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Nyní si zvolte, které služby mají být spuštěny při startu počítače.\n"
-"\n"
-"Je zde seznam všech služeb, které jsou aktuálně nainstalovány.\n"
-"Prohlédněte si seznam pozorně a zrušte ty, které nepotřebujete spouštět při\n"
-"startu počítače.\n"
-"\n"
-"Pokud přejedete myší nad některou položkou, objeví se malá nápověda\n"
-"s popisem, co daná služba dělá. Pokud přesně nevíte, zda je služba užitečná\n"
-"nebo ne, je lepší ji nechat ve výchozím stavu.\n"
-"\n"
-"Rozvažte, co za služby spustit, zvláště pokud budete počítač provozovat\n"
-"jako server: nepotřebujete všechny služby. Pamatujte, že čím více služeb\n"
-"je spuštěno, tím je větší nebezpečí nežádoucího proniknutí do počítače.\n"
-"Takže povolte opravdu jen ty služby, které nezbytně potřebujete."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux spravuje čas podle GMT (Greenwich Mean Time) a převádí ho na\n"
-"čas podle příslušné vybrané časové zóny. Toto je možné zrušit odznačením\n"
-"volby \"Hodiny nastaveny na GMT\" a tak budou systémové hodiny stejné jako\n"
-"hardwarové. To je dobré v tom případě, že na počítači je jiný operační "
-"systém\n"
-"typu Windows.\n"
-"\n"
-"Volba \"Automatická synchronizace času\" provádí automatické nastavení "
-"hodin\n"
-"připojením se k časovému serveru na internetu. Vyberte si v seznamu ten "
-"server,\n"
-"který je vám nejblíž. Je zamořejmé, že pro správnou funkci musíte mít "
-"fukční\n"
-"připojení k internetu. Na počítač se také nainstaluje časový server, který\n"
-"mohou používat jiné počítače ve vaší lokální síti."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X Window System (zkráceně X) je srdcem grafického rozhraní GNU/Linuxu,\n"
-"na kterém jsou provozovány grafická prostředí (KDE,Gnome,AfterStep, "
-"WindowMaker)\n"
-"V této sekci se DrakX pokusí nakonfigurovat X automaticky.\n"
-"\n"
-"Existují případy, kdy se automatická detekce nezdaří. Je to v případech, že\n"
-"je daný hardware velmi starý (nebo velmi nový). Pokud se detekce podaří,\n"
-"spustí se grafické prostředí v nejlepším možném rozlišení v závislosti na "
-"monitoru. Proběhne test, kdy se zobrazí okno s otázkou, zda je vše správně\n"
-"zobrazeno.\n"
-"\n"
-"Pokud provádíte \"Expertní\" instalaci, spustí se průvodce konfigurací X "
-"Window. Více informací o průvodci naleznete v odpovídající sekci v manuálu.\n"
-"\n"
-"Pokud při testu nastavení uvidíte zprávu dobře, odpovězte \"Yes\" a "
-"instalace\n"
-"pokračuje dalším krokem.\n"
-"Pokud nic neuvidíte, test automaticky skončí za 10 vteřin a obnoví se\n"
-"obrazovka."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Může se stát, že při prvním testu nebude zvoleno nejoptimálnější rozlišení\n"
-"(obrazovka je příliš malá, je posunuta doprava či doleva...) V této chvíli "
-"se\n"
-"instalační program dotáže, jaké rozlišení si přejete a nabídne seznam\n"
-"použitelných rozlišení.\n"
-"\n"
-"Pokud se nepodaří X Window korektně spustit, vyberte se z nabídky \"Změnit"
-"\"\n"
-"grafickou kartu, vyberte \"Neznámá karta\" a při otázce na výběr serveru "
-"odpovězte\n"
-"\"FBDev\". Tato volba dovoluje při potížích spustit X Window na všech\n"
-"moderních grafických kartách. Potom \"Znova otestovat\" pro ověření."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Poslední otázka je na to, zda chcete spustit grafické prostředí při startu.\n"
-"Tato otázka se zobrazí i v případě, že nastavení předtím neotestujete.\n"
-"Je zřejmé, že odpovíte \"Ne\" v případě, že počítač bude pracovat\n"
-"jako server nebo v případě, že se nepodařilo správně nastavit grafickou "
-"kartu."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"CDROM s distribucí Mandrake Linux má zabudovaný záchranný režim. Můžete ho\n"
-"spustit přímo při spuštění z CD, kdy stisknete klávesu >>F1<< a na "
-"příkazový\n"
-"řádek napíšete >>rescue<<. Pokud počítač neumožňuje bootovat z CD, potom\n"
-"v tomto kroku najdete řešení na následující situace:\n"
-"\n"
-" * pokud používáte zaváděcí program, DrakX přepíše zaváděcí sektor (MBR) na\n"
-"pevném disku (pokud nepoužíváte jiný zaváděcí program) aby umožnil start "
-"buď\n"
-"Windows nebo GNU/Linuxu (pokud máte Windows na počítači nainstalovány).\n"
-"Pokud potřebujete Windows přeinstalovat, instalační program Microsoftu "
-"přepíše\n"
-"zaváděcí sektor a nemáte tak možnost spustit GNU/Linux!\n"
-"\n"
-" * pokud se objeví problémy a není možné spustit GNU/Linux z pevného disku,\n"
-"je disketa jedinou možností, jak systém spustit. Obsahuje základní "
-"systémové\n"
-"nástroje na obnovení systému buď pří výpadku napájení, chybě v hesle nebo\n"
-"z jiných důvodů.\n"
-"\n"
-"Pokud zvolíte tento krok, musíte vložit disketu do mechaniky. Disketa musí\n"
-"být prázdná, nebo na ní mohou být data, která již nepotřebujete. Následně "
-"se\n"
-"provede formát diskety a DrakX celý její obsah přepíše."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"V tomto bodě si musíte definovat, na které diskové oddíly budete\n"
-"instalovat nový operační systém Mandrake Linux. Pokud je disk prázdný\n"
-"nebo existující operační systém používá celý disk, je nutné ho rozdělit.\n"
-"Rozdělení disku spočívá ve vytvoření volného prostoru pro instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"Protože rozdělení disku je nenávratná operace, je to velmi nebezpečná\n"
-"akce pro ty uživatele, kteří nemají žádné zkušenosti.\n"
-"Pro tyto uživatele je dobrý průvodce, který zjednoduší daný proces.\n"
-"Ještě před započetím rozdělování disku si pročtěte manuál.\n"
-"\n"
-"Pokud máte zvolený Expertní režim, spustil se nástroj na práci s diskem: "
-"Diskdrake, který umožňuje lépe nastavit diskové oddíly. Pokud chcete použít\n"
-"průvodce, klikněte na tlačítko \"Průvodce\".\n"
-"\n"
-"Pokud máte již vytvořeny diskové oddíly z předchozích instalací nebo\n"
-"od jiných diskových nástrojů, lze je nyní použít pro instalaci.\n"
-"\n"
-"Pokud nejsou definovány žádné diskové oddíly, je nutné je vytvořit.\n"
-"K tomu slouží průvodce, který nabídne několik řešení:\n"
-"\n"
-" * \"Použít volný prostor\": takto se jednoduše automaticky disk(y) rozdělí\n"
-"a již se o nic nemusíte starat.\n"
-"\n"
-" * \"Použít existující oddíly\": průvodce detekoval jeden nebo více "
-"existujících\n"
-"Linuxových oddílů a ty nabídne pro instalaci.\n"
-"\n"
-" * \"Použít volné místo na oddíle s Windows\": pokud máte na disku "
-"nainstalovány\n"
-"Microsoft Windows a zabírají celý disk, je možné tento prostor zmenšit \n"
-"a použít ho pro instalaci. Změna velikost oddílu je provedena bez ztráty "
-"dat.\n"
-"Tento postup je doporučený, pokud chcete na disku provozovat jak systém\n"
-"Linux Mandrake tak i Microsoft Windows.\n"
-"\n"
-" Před touto volbou si uvědomte, že velikost oddílu s Microsoft Windows\n"
-"bude menší než je nyní. To znamená, že budete mít méně místa pro \n"
-"instalaci programů do Microsoft Windows.\n"
-"\n"
-" * \"Zrušit celý disk\": pokud chcete smazat veškerá data a všechny oddíly\n"
-"na disku a použít je pro instalaci systému Mandrake Linux, vyberte toto\n"
-"řešení. Zde postupujte opatrně, po výběru již není možné vzít volbu zpět.\n"
-"\n"
-" !! Pokud zvolíte tuto možnost, všechna data na disku budou ztracena.!!\n"
-"\n"
-" * \"Odstranit Windows\": takto se jednoduše smaže celý disk a bude se "
-"instalovat\n"
-"na celý disk- Všechna data tak budou ztracena.\n"
-"\n"
-" !! Pokud vyberete tuto volbu, veškerá data budou ztracena. !!\n"
-"\n"
-" * \"Expertní režim\": pokud chcete disk rozdělit ručně. Před touto volbou "
-"buďte\n"
-"opatrní, je sice mocná, ale nebezpečná.\n"
-"Nedoporučuje se těm, kteří přesně nevědí, co dělají."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nyní je instalace ukončena a operační systém GNU/Linux je připraven k "
-"použití.\n"
-"Klikněte na \"OK\" a systém bude restartován. Potom můžete spustit GNU/Linux "
-"nebo\n"
-"Windows, záleží který preferujete\n"
-"\n"
-"Tlačítko \"Rozšířené\" zobrazí další dvě tlačítka:\n"
-"\n"
-" * Generovat disketu pro automatickou instalaci: vytvoří disketu, se kterou\n"
-"lze celou instalaci opakovat bez zásahu operátora se stejnými volbami,\n"
-"které byly zvoleny při instalaci.\n"
-"\n"
-" Po kliknutí na toto tlačítko se zobrazí další dvě volby:\n"
-"\n"
-" * : Zopakovat: je to částečně automatická instalace, kdy se potvrzuje "
-"krok\n"
-"při rozdělování disků (a pouze tento krok).\n"
-"\n"
-" * : Automaticky: plně automatická instalace, data na pevném disku budou\n"
-"zrušena a disk přepsán.\n"
-"\n"
-" Tato volba je velmi užitečná, když potřebujete nainstalovat větší počet\n"
-"stejných počítačů. Více o této možnosti je na našich WWW stránkách.\n"
-"\n"
-" * Uložit výběr balíčků(*): uloží výběr balíčků, který byl zvolen při "
-"instalaci.\n"
-"Pokud budete instalovat další počítač, vložte disketu do mechaniky a "
-"spusťte\n"
-"instalaci, stiskněte [F1] a napište na příkazový řádek >linux defcfg=\"floppy"
-"\"<.\n"
-"\n"
-"(*) Potřebujete disketu formátovanou FAT (Pod Linuxem ji vytvoříte příkazem\n"
-"\"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Každý nově vytvořený diskový oddíl musí být před použitím zformátován\n"
-"(formátováním se myslí vytvoření souborového systému).\n"
-"\n"
-"Nyní lze formátovat již existující diskové oddíly pro vymazání\n"
-"všech dat, která obsahují. Pokud to chcete provést, vyberte diskové oddíly\n"
-"pro přeformátování.\n"
-"\n"
-"Není ale nutné přeformátovat všechny již existující diskové oddíly.\n"
-"Je nutné přeformátovat oddíly, které obsahují operační systém (jako je \"/"
-"\",\n"
-"\"/usr\" nebo \"/var\") ale není nutné přeformátovat oddíly, které obsahují\n"
-"data, která chcete zachovat (typicky /home).\n"
-"\n"
-"Při výběru diskových oddílů, které se budou formátovat buďte opatrní, "
-"všechna\n"
-"data na formátovaných oddílech budou ztracena a nelze je již obnovit.\n"
-"\n"
-"Pokud je vše připraveno pro formátování, klikněte na \"OK\".\n"
-"\n"
-"Klikněte na \"Zrušit\" pokud chcete vybrat jiné oddíly pro instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"Kliknutím na \"Rozšířené\" můžete vybrat, které oddílz budou otestovány\n"
-"na vadné bloky."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Nyní začne nová instalace operačního systému Mandrake Linux.\n"
-"Tato operace může trvat několik desítek minut (záleží na množství balíčků,\n"
-"které jste si vybrali pro instalaci a rychlosti vašeho počítače).\n"
-"\n"
-"Mějte prosím trpělivost a vyčkejte."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Pokaždé, když instalujete Mandrake Linux, je možné, že některé balíčky byly\n"
-"od vydání distribuce aktualizovány. Mohly to být opravy chyb či řešení "
-"možných\n"
-"bezpečnostních problémů. Pokud chcete využít právě této nabídky, je možné\n"
-"je nyní stáhnout z internetu. Zvolte \"Ano\" pokud máte funkční připojení "
-"na\n"
-"internet nebo \"Ne\" pokud budete instalovat aktualizace později.\n"
-"\n"
-"Po zvolení \"Ano\" se zobrazí seznam míst, odkud mohou být aktualizace "
-"získány.\n"
-"Vyberte si nejbližší místo. Následně se objeví stromový seznam balíčků, "
-"který\n"
-"je možno ještě upravit a stisknutím tlačítka \"Instalovat\" se provede "
-"stažení\n"
-"a instalace vybraných balíčků. Akci můžete přerušit klepnutím na \"Zrušit\"."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Předtím, než budete pokračovat, přečtěte si pozorně podmínky licence. Ty\n"
-"se vztahují k celé distribuci Mandrake Linux a pokud s nimi nesouhlasíte,\n"
-"klikněte na tlačítko \"Odmítnout\". Instalace ihned skončí. Pokud chcete "
-"pokračovat\n"
-"v instalaci, klikněte na tlačítko \"Potvrdit\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nyní si vyberte úroveň zabezpečení vašeho počítače Je zřejmé, že čím více "
-"je\n"
-"počítač využíván a čím cennější data obsahuje, tím je potřeba zvolit vyšší\n"
-"úroveň. Na druhou stranu, vyšší úroveň znesnadňuje některé obvyklé postupy.\n"
-"Více informací o úrovních bezpečnosti se dočtete v kapitole MSEC v "
-"referenční\n"
-"příručce. \n"
-"Pokud nevíte co vybrat, ponechte výchozí nastavení."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"V této chvíli je potřebné určit, který(é) oddíl(y) budou použity pro "
-"instalaci\n"
-"systému Mandrake Linux. Pokud byly oddíly již jednou definovány, buď\n"
-"z předchozí instalace GNU/Linux nebo jiným programem na rozdělení disku,\n"
-"je možné použít právě tyto oddíly. Jinak musí být oddíly nově definovány.\n"
-"\n"
-"Pro vytvoření oddílu musíte nejdříve vybrat pevný disk. Klikněte na \n"
-"\"hda\", což je první IDE disk, nebo na \"hdb\", což je druhý disk,\n"
-"případně na \"sda\", což je první SCSI disk.\n"
-"\n"
-"Pro rozdělení vybraného disku můžete použít tyto volby:\n"
-"\n"
-" * \"Vše smazat\": tato volba smaže všechny oddíly na disku.\n"
-"\n"
-" * \"Automaticky rozmístit\": dojde k automatickému vytvoření oddílu pro\n"
-"Ext2 a swap ve volném prostoru disku.\n"
-"\n"
-" * \"Více\": nabídne další možnosti:\n"
-"\n"
-" * \"Uložit tabulku na disketu\": uloží tabulku oddílů na disketu. To je\n"
-"vhodné pro případ poškození tabulky, kdy ji lze z této zálohy obnovit.\n"
-"Doporučujeme využít tuto možnost.\n"
-"\n"
-" * \"Obnovit z diskety\": obnoví tabulku oddílů, která byla již dříve\n"
-"uložena na disketu.\n"
-"\n"
-" * \"Záchrana tabulky oddílů\": pokud je tabulka poškozena, můžete se\n"
-"pokusit ji opravit. Buďte ale opatrní a pamatujte na to, že se to nemusí "
-"vždy\n"
-"podařit.\n"
-"\n"
-" * \"Znovu načíst\": zruší všechny změny a nahraje původní tabulku oddílů.\n"
-"\n"
-" \"připojovat vyjímatelná média\": odznačením této volby způsobí, že při\n"
-"připojování a odpojování vyjímatelných médií jako jsou CD-ROM disky a "
-"floppy\n"
-"disky je nutné použít ručně příkaz mount.\n"
-"\n"
-" * \"Průvodce\": pokud nemáte dobré znalosti o rozdělování disků, použijte\n"
-"tuto volbu, kdy se spustí průvodce.\n"
-"\n"
-" * \"Odvolat\": zruší všechny provedené změny.\n"
-"\n"
-" * \"Přepnout normální/expertní režim\": dovoluje další akce s oddíly\n"
-"(typ oddílu, volby, formátování) a zobrazí další informace.\n"
-" * \"Hotovo\": pokud máte disk rozdělen, uloží se změny na disk.\n"
-"\n"
-"Poznámka: každou volbu je možné zadat také z klávesnice. Mezi oddíly se\n"
-"můžete pohybovat pomocí kláves [Tab] a [Šipka nahoru/šipka dolů].\n"
-"\n"
-"Pokud je vybrán oddíl, lze použít tyto volby:\n"
-"\n"
-" * Ctrl-c pro vytvoření nového oddílu (pokud je vybrán prázdný oddíl);\n"
-"\n"
-" * Ctrl-d pro smazání oddílu;\n"
-"\n"
-" * Ctrl-m pro zadání bodu připojení.\n"
-"\n"
-"Více informací o jednotlivých druzích souborových systémů naleznete\n"
-"v kapitole o ext2fs v \"Referenční příručce\".\n"
-"\n"
-"Pokud instalujete na počítač PPC, je potřeba vytvořit malý oddíl HPFS,\n"
-"tzv. \"bootstrap\" o minimální velikosti 1MB, který bude použit pro zavaděč\n"
-"yaboot. Pokud vytvoříte tento oddíl větší, např. 50 MB, je to dobré místo "
-"pro\n"
-"uložení ramdisku a jádra pro situace záchrany disku."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Instalační program nalezl na disku více než jeden oddíl s Microsoft "
-"Windows.\n"
-"Prosím vyberte si jeden z nich, který je potřeba zmenšit pro novu instalaci\n"
-"systému Mandrake Linux.\n"
-"\n"
-"Každý oddíl je zobrazen následovně: \"Jméno pro Linux\",\n"
-"\"Jméno pro Windows\", \"Velikost\".\n"
-"\n"
-"\"Jméno pro Linux\" je složeno následovně: \"typ pevného disku\",\n"
-"\"číslo disku\", \"číslo oddílu\". (například \"hda1\").\n"
-"\n"
-"Pokud máte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud máte SCSI,\n"
-"označení bude \"sd\".\n"
-"\n"
-"\"Číslo disku\" je vždy písmeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE řadiči\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE řadiči\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE řadiči\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE řadiči\".\n"
-"\n"
-"Pro SCSI disky platí, že \"a\" je \"nejmenší SCSI ID\", \"b\" je \"druhé\n"
-"nejmenší SCSI ID\" atd.\n"
-"\n"
-"\"Jméno pro Windows\" je písmeno, které je použito ve Windows\n"
-"(první oddíl nebo disk má písmeno \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Buďte trpěliví. Tato operace může trvat několik minut."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Nyní se instalační program zeptá na to, zda chcete provést (\"Doporučenou"
-"\")\n"
-"nebo (\"Expertní\") instalaci, která dovoluje větší kontrolu.\n"
-"Také si zde můžete vybrat, zda chcete provést novou instalaci nebo "
-"aktualizaci\n"
-"již existující verze systému Mandrake Linux.:\n"
-"\n"
-" * \"Instalovat\" Kompletně přemaže starou verzi. V závislosti na tom, co "
-"je\n"
-"na daném systému nainstalováno zůstanou jiné oddíly nezměněny.\n"
-"\n"
-" * \"Aktualizovat\" Provede aktualizaci instalovaného systému Mandrake "
-"Linux.\n"
-"Rozdělení disku i veškerá data uživatelů zůstanou zachována. Jinak se "
-"provede\n"
-"téměř čistá instalace.\n"
-"\n"
-" * \"Aktualizovat pouze balíčky\" Provede aktualizaci balíčků z předchozí\n"
-"verze bez dalších změn. Je také možné nainstalovat nové balíčky.\n"
-"\n"
-"Aktualizace je bezproblémová od verze Mandrake Linux 8.1\n"
-"\n"
-"V závislosti na vašich znalostech GNU/Linuxu si můžete vybrat z "
-"následujících\n"
-"úrovní instalace operačního systému Mandrake Linux:\n"
-"\n"
-"* Doporučená: volte pokud jste ještě nikdy neinstalovali GNU/Linux. "
-"Instalace bude velmi jednoduchá a budete dotázáni pouze na několik otázek.\n"
-"\n"
-"* Expertní: jestliže jste dobře obeznámeni s GNU/Linuxem a chcete provést\n"
-"precizní nastavení instalace, je právě pro vás tato volba. Budete si moci\n"
-"přesně upravit celou instalaci. Odpovědi na otázky budou velmi těžké pro\n"
-"ty, kteří nemají velmi dobré znalosti GNU/Linuxu.\n"
-"Nevolte tuto volbu, pokud přesně nevíte, co děláte."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normálně instalační program zvolí správnou klávesnici na základě zvoleného\n"
-"jazyka, takže není potřeba nic v tomto kroku měnit. \n"
-"Může se ale stát, že nemáte klávesnici, která odpovídá vašemu jazyku: "
-"například\n"
-"pokud jste anglicky hovořící Švýcar, stejně chcete mít švýcarskou "
-"klávesnici.\n"
-"Nebo pokud mluvíte anglicky ale žijete v Quebecu, je to stejný případ. V "
-"obou\n"
-"případech se můžete na tento instalační krok a vybrat si odpovídající\n"
-"klávesnici ze seznamu.\n"
-"\n"
-"Pokud máte klávesnici pro jiný jazyk, klikněte na tlačítko \"Více\"\n"
-"a zobrazí se kompletní seznam všech podporovaných rozložení klávesnic."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Vyberte si prosím vámi preferovaný jazyk, který se bude používat při "
-"instalaci\n"
-"a v celém systému.\n"
-"\n"
-"Tlačítko \"Rozšířené\" umožňuje zvolit další jazyky, které budou také "
-"nainstalovány\n"
-"a můžete je použít v systému. Pokud například na počítači pracují občas "
-"lidé\n"
-"ze Španělska, vyberte angličtinu jako hlavní jazyk a pod tlačítkem "
-"rozšířené\n"
-"zatrhněte volbu \"Španělština\".\n"
-"\n"
-"Pokud máte jazyk vybrán, klikněte na \"OK\" a instalace bude pokračovat\n"
-"dalším krokem."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX zjistil, že máte dvou tlačítkovou myš a nastaví emulaci pro třetí "
-"tlačítko.\n"
-"Taky umí rozpoznat, zda je myš PS/2, USB nebo sériová.\n"
-"\n"
-"Pokud chcete zadat jiný typ myši, vyberte odpovídající typ se seznamu.\n"
-"\n"
-"Pokud vyberete jinou myš než ta, která byla detekována, zobrazí se "
-"testovací\n"
-"obrazovka. Zde otestujte jak tlačítka tak i kolečko, zda je nastavení "
-"správné.\n"
-"Pokud myš nepracuje správně, stiskněte mezerník nebo ENTER na \"Zrušit\"\n"
-"a vyberte jiný typ."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vyberte prosím správný port. Například \"COM1\" pod MS Windows se\n"
-"v Linuxu jmenuje \"ttyS0\"."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Následující rozhodnutí je jedním z těch, které ovlivňují celkovou "
-"bezpečnost\n"
-"systému GNU/Linux, tj. volba hesla pro uživatele \"Root\". Root je "
-"administrátorem\n"
-"systému, je odpovědný za provádění aktualizací, přidávání uživatelů a také\n"
-"za celkovou konfiguraci systému. Zkráceně: root může úplně všechno!\n"
-"To je také důvodem, proč se heslo volí takové, aby se nedalo lehce uhodnout\n"
-"a instalační program zkontroluje, zda není příliš jednoduché. Jak vidíte, "
-"je\n"
-"možné mít účet bez hesla, ale velmi důrazně doporučujeme nějaké heslo "
-"zadat,\n"
-"z jednoho důvodu. Nemyslete si, že pokud spustíte GNU/Linux, že nemůžete\n"
-"udělat už žádnou chybu. Uživatel root může nenávratně poškodit celý systém,\n"
-"vymazat potřebné soubory, atd.\n"
-"\n"
-"Zvolené heslo by se mělo skládat ze znaků a číslic a melo by být minimálně "
-"8\n"
-"znaků dlouhé. Také není dobré si ho kamkoliv poznamenávat.\n"
-"\n"
-"Nevolte heslo příliš dlouhé nebo komplikované, bude nutné si jej pamatovat.\n"
-"\n"
-"Heslo se zadává dvakrát pro ověření toho, zda nedošlo k překlepu při prvním\n"
-"pokusu. Tak je možné heslo opravit a zadat dvakrát stejné.\n"
-"\n"
-"V expertním režimu budete dotázáni na to, zda se má použít autentikační\n"
-"server, jako je NIS nebo LDAP.\n"
-"\n"
-"Pokud se ve vaší síti používá protokol LDAP (nebo NIS) pro ověřování\n"
-"uživatelů, vyberte \"LDAP\" (nebo \"NIS\"). Pokud o tom nic nevíte,\n"
-"zeptejte se administrátora sítě.\n"
-"\n"
-"Pokud není počítač připojen do žádné administrované sítě, zvolte\n"
-"\"Lokální soubory\" pro autentikaci."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO a grub jsou zavaděče systému. Tato část je normálně plně automatická.\n"
-"DrakX analyzuje boot sektor a zachová se podle toho, co nalezne:\n"
-"\n"
-" * pokud nalezne boot sektor Windows, přepíše ho sektorem pro LILO/grub aby\n"
-"bylo možné spouštět jak Windows tak i Linux;\n"
-"\n"
-" * pokud nalezne boot sektor pro LILO nebo grub, tak jej přepíše.\n"
-"\n"
-"Pokud jsou nějaké pochybnosti, je zobrazen dialog s výběrem možností.\n"
-"\n"
-" * \"Jaký spouštěč použít:\" je možné si vybrat:\n"
-"\n"
-" * \"GRUB\": pokud preferujete textovou verzi zavaděče Grub.\n"
-"\n"
-" * \"LILO s grafickou nabídkou\": pokud preferujete LILO s grafickým\n"
-"rozhraním.\n"
-"\n"
-" * \"LILO s textovou nabídkou\": pokud preferujete textové rozhraní.\n"
-"\n"
-" * \"Spouštěcí zařízení\": ve většině případů není nutné měnit výchozí\n"
-"nastavení (\"/dev/hda\"), ale lze nainstalovat zavaděč na druhý disk\n"
-"(\"/dev/hdb\") nebo dokonce na disketu (\"/dev/fd0\").\n"
-"\n"
-" * \"Prodleva přes spuštěním\": pokud zapnete počítač, je tímto časem\n"
-"umožněno uživateli vybrat si jiný systém z nabídky než bude zaveden výchozí\n"
-"systém.\n"
-"\n"
-"!! Vyvarujte se pokusů o to nenainstalovat zavaděč (vybráním volby \"Zrušit"
-"\"),\n"
-"protože by měl existovat způsob, jak spustit Mandrake Linux!\n"
-"Také si dobře rozmyslete, jaké změny zde provádíte !!\n"
-"\n"
-"Kliknutím na tlačítko \"Rozšířené\" se dialog rozšíří o další možnosti,\n"
-"vyhrazené pro znalé uživatele.\n"
-"\n"
-"Mandrake Linux nainstaluje svůj vlastní zavaděč, který dovoluje spouštět\n"
-"vlastní systém stejně jako další operační systémy.\n"
-"\n"
-"Pokud máte jiný operační systém již na počítači, automaticky ho zařadí do\n"
-"nabídky pro spouštění. Zde je možné dále doladit volby, které se předávají "
-"tím,\n"
-"že na danou nabídkou dvakrát poklepete, lze také přidat další nabídku\n"
-"či danou nabídku odebrat. K dalšímu kroku se dostanete kliknutím na \"Hotovo"
-"\"."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) a grub jsou zavaděče systému, které mohou spustit\n"
-"buď GNU/Linux nebo jiný operační systém nainstalovaný na počítači.\n"
-"Ve většině případů jsou tyto systému správně detekovány. Pokud se tak\n"
-"nestane, máte možnost je ručně přidat v této obrazovce. Věnujte opatrnost\n"
-"parametrům, které zadáváte.\n"
-"\n"
-"Pokud nechcete umožnit přístup k těmto operačním systémům komukoliv, můžete\n"
-"je z nabídky odstranit. Ale v tom případě musíte mít spouštěcí disketu, ze\n"
-"které je možné tento operační systém spustit!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Zde se musíte rozhodnout, kam umístit informace potřebné pro spuštění "
-"systému\n"
-"GNU/Linux.\n"
-"\n"
-"Pokud přesně nevíte co zadat, ponechte \"První sektor na disku (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Zde si můžete vybrat tiskový systém, který budete používat. Jiné OS "
-"nabízejí\n"
-"jeden, Mandrake nabízí tři.\n"
-"\n"
-" * \"pdq\" - což znamená 'print, don't queue' a je vhodný tehdy, pokud "
-"nemáte\n"
-"žádné síťové tiskárny. Zvládá pouze několik možností a tisk na něj ze sítě\n"
-"je velmi pomalý. Tuto volbu lze po instalaci změnit spuštěním nástroje "
-"PrinterDrake\n"
-"z řídícího centra Mandrake, pokud kliknete na tlačítko Expert.\n"
-"\n"
-" * \"CUPS\"'Common Unix Printing System' je vynikající v tisku na lokální\n"
-"tiskárny. Je jednoduchý a může fungovat jako klient i server pro klienty z "
-"\"lpd\"\n"
-"systému, takže je s nimi kompatibilní. Je možné nastavit spoustu voleb,\n"
-"ale základní nastavení je velmi jednoduché. Pokud potřebujete emulovat\n"
-"\"lpd\" server, stači spustit démona \"cups-lpd\". Má také grafické "
-"prostředí\n"
-"pro tisk a nastavení tiskárny.\n"
-"\n"
-" * \"lprNG\" - 'line printer daemon New Generation'. Tento systém dokáže to\n"
-"co ostatní, ale umí tisknout na tiskárny připojené k Novell Netware, "
-"protože\n"
-"podporuje IPX protokol a také umí zpracovat přímo tiskové příkazy. Pokud\n"
-"potřebujete tisk na tiskárnách ze sítě Novell nebo tiskový systém bez\n"
-"zvláštní tiskové fronty, vyberte si lprNG.\n"
-"Jinak je preferován CUPS, protože je jednodušší a lépe pracuje v sítích."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX se nejdříve pokusí najít všechny pevné disky v počítači. Také se "
-"pokusí\n"
-"najít PCI SCSI adaptér(y). Pokud nějaký(é) najde, automaticky nainstaluje\n"
-"správný ovladač.\n"
-"\n"
-"Pokud žádný nanajde, budete dotázáni, zda vůbec máte nějaký SCSI adaptér.\n"
-"Odpovězte \"Ano\" a vyberte si se seznamu adaptérů nebo odpovězte \"Ne\","
-"jestliže žádný adaptér nemáte.\n"
-"Pokud přesně nevíte jaký máte, můžete to zjistit kliknutím na tlačítko\n"
-"\"Zobrazit informace o hardware\".\n"
-"\n"
-"Pokud si vyberete ovladač, DrakX se zeptá, zda pro něj chcete zadat nějaké\n"
-"informace. DrakX se pokusí inicializovat hardware s volbami, které jsou "
-"potřeba.\n"
-"Většinou to funguje dobře.\n"
-"\n"
-"Pokud to nebude fungovat, budete muset zadat další informace pro ovladač.\n"
-"Pro další nápovědu se podívejte do instalační příručky (kapitola 3 "
-"\"Získání\n"
-"informací o hardware\"), kde je popsáno, jak získat tyto informace z "
-"Windows\n"
-"(pokud je máte na počítači), z dokumentace k hardware, nebo z internetové\n"
-"stránky výrobce (pokud máte přístup k internetu."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Pro yaboot, pro další operační systémy, pro alternativní jádra nebo pro\n"
-"záchranný disk lze zde zadat další parametry.\n"
-"\n"
-"Pro jiné OS je možné zadat pouze název a hlavní oddíl.\n"
-"\n"
-"Pro Linux je několik dalších možností:\n"
-"\n"
-" * Jmenovka: je to jednoduché jméno, které můžete napsat do příkazového\n"
-"řádku pro yaboot pro zvolení daného systému.\n"
-"\n"
-" * Obraz: je to jmého jádra, ze kterého se spustí systém. Typicky je to "
-"vmlinux\n"
-"či obdoba slova vmlinux s příponami.\n"
-"\n"
-" * Root: kořenové zeřízení \"/\" při instalaci Linuxu.\n"
-"\n"
-" * Přidat volby: na počítačích Apple potřebuje jádro další parametry, aby "
-"se\n"
-"správně nastavil hardware pro video, či provedla emulace tlačítek myši\n"
-"na klávesnici, protože myš u počítače Apple nemá druhé a třetí tlačítko.\n"
-"Zde jsou nějaké příklady:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: tato volba je určena moduly, které se musí nahrát do paměti "
-"ještě\n"
-"dříve, než je přístupný spouštěcí oddíl, či v případě opravy systému.\n"
-"\n"
-" * Velikost initrd: výchozí velikost ramdisku je 4,096 bytů. Pokud "
-"potřebujete\n"
-"větší velikost, zadejte sem potřebnou hodnotu.\n"
-"\n"
-" * Read-write: bežně je \"root\" oddíl připojen nejdříve v režimu pouze pro\n"
-"čtení, aby se provedlo otestování systému před tím, než se použije pro běh.\n"
-"Zde je možné toto chování změnit.\n"
-"\n"
-" * Bez grafiky: grafické zařízení na počítačích Apple je někdy "
-"problematické\n"
-"a tak je možné zadat tuto volbu a zvolit nativní podporu.\n"
-"\n"
-" * Výchozí: zvolí tuto položku jako výchozí pro výběr z nabídky, kdy stačí\n"
-"pouze stisknout ENTER a spustí se. Tato položka je označena \"*\" a všechny\n"
-"výběry se zobrazí po stisknutí tlačítka [Tab]."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je zavaděč pro počítače MacIntosh. Umožňuje spouštět jak GNU/Linux, "
-"MacOS tak i MacOSX, pokud jsou na počítači nainstalovány. Ve většině\n"
-"případů jsou tyto operační systémy správně detekovány. Pokud nejsou, můžete\n"
-"zde na této obrazovce přidat záznamy ručně. Dejte si ale pozor na správnou\n"
-"volbu parametrů.\n"
-"\n"
-"Yaboot má tyto hlavní volby:\n"
-"\n"
-" * Úvodní hláška: jednoduchá textová zpráva, která je zobrazena před "
-"výzvou.\n"
-"\n"
-" * Spouštěcí zařízení: udává místo, kde jsou informace potřebné pro "
-"spuštění\n"
-"GNU/Linuxu. Obyčejně je to bootstrap oddíl, který byl vytvořen již předtím.\n"
-"\n"
-" * Prodleva pro Firmware: narozdíl od zavaděče LILO jsou zde dvě prodlevy.\n"
-"První prodleva v sekundách umožňuje zvolit mezi spuštěním CD, OF boot,\n"
-"MacOS nebo Linuxu.\n"
-"\n"
-" * Prodleva pro jádro: tato prodleva je podobná prodlevě pro LILO.\n"
-"Udává v násobcích 0,1 vteřiny jak dlouho se čeká, než se zavede \n"
-"výchozí jádro.\n"
-"\n"
-" * Povolit spuštění z CD?: tato volba dovoluje použít \"C\" pro spuštění "
-"CD.\n"
-"\n"
-" * Povolit OF Boot?: tato volba dovoluje použít \"N\" pro spuštění Open "
-"Firm.\n"
-"\n"
-" * Výchozí OS: vyberte výchozí OS, který se spustí po uplynutí prodlevy."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Zde jsou shromážděny různé informace, které se vztahují k tomuto počítači.\n"
-"V závislosti na tom, zda je či není přítomen daný hardware, můžete ale\n"
-"nemusíte, vidět tyto položky: \n"
-"\n"
-" * \"Myš\": pokud je zjištěna myš, můžete zde změnit její nastavení.\n"
-"\n"
-" * \"Klávesnice\": kliknutím na tlačítko lze změnit klávesovou mapu.\n"
-"\n"
-" * \"Časové pásmo\": instalační program se pokusí odhadnout časové pásmo na\n"
-"základě vybraného jazyka. To ale nemusí souhlasit, můžete žít v jiné zemi\n"
-"a tak je zde umožněno změnit časovou zónu, ve které se nyní nacházíte.\n"
-"\n"
-" * \"Tiskárna\": Kliknutím na tlačítko \"Bez tiskárny\" se spustí průvodce\n"
-"konfigurací tiskárny.\n"
-"\n"
-" * \"Zvuková karta\": pokud byla při instalaci detekována zvuková karta, je\n"
-"zde zobrazena. Při instalaci není možné nic měnit.\n"
-"\n"
-" * \"TV karta\": pokud byla detekována televizní karta, je zde zobrazena.\n"
-"Při instalaci není možné nic měnit.\n"
-"\n"
-" * \"ISDN karta\": pokud byla detekována ISDN karta, je zde zobrazena.\n"
-"Kliknutím na tlačítko můžete měnit parametry pro tuto kartu."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vyberte disk, který chcete smazat pro instalaci Mandrake Linux.\n"
-"Pamatujte na to, že všechna data budou ztracena a nelze jejiž obnovit!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klikněte na \"OK\", pokud chcete smazat všechna data a oddíly na tomto\n"
-"pevném disku. Buďte opatrní, po odkliknutí nelze obnovit žádná dřívější "
-"data\n"
-"ani oddíly a to i pro Windows.\n"
-"\n"
-"Kliknutím na \"Zrušit\" zrušíte tuto operaci bez ztráty dat a oddílů na "
-"disku."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Nelze načíst moduly pro jádro odpovídající instalovanému jádru (chybí "
-"soubor\n"
-"%s), což obecně znamená, že spouštěcí disketa nemá jádro stejné jako má "
-"instalační médium (vytvořte prosím novou spouštěcí disketu)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Musíte také naformátovat %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vybrali jste pro instalaci následující server(y): %s\n"
-"\n"
-"\n"
-"Tyto servery budou standardně aktivovány. Přestože není známý žádný\n"
-"bezpečnostní problém, mohou se přesto vyskytnout. Je proto důležité "
-"aktualizovat\n"
-"vždy, když je to potřeba.\n"
-"\n"
-"\n"
-"Chcete opravdu nainstalovat tyto servery?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Nelze použít všesměrové vysílání bez NIS domény"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Vložte naformátovanou disketu do %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Tato disketa není formátována"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pokud chcete použít uložený výběr balíčků, spusťte instalaci takto: 'linux "
-"defcfg=floppy'"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Chyba při čtení souboru %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Některá část vašeho hardware potřebuje 'speciální' ovladače, aby mohla "
-"pracovat.\n"
-"Další informace můžete nalézt na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Musíte mít kořenový oddíl.\n"
-"K jeho vytvoření musíte zvolit jeden existující oddíl\n"
-"(nebo vytvořit nový), zvolit 'Přípojný bod'\n"
-"a nastavit ho na '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Musíte mít odkládací oddíl"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nemáte odkládací oddíl\n"
-"\n"
-"Chcete přesto pokračovat?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Musíte mít FAT oddíl připojený na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Použít volné místo"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Není dostatek místa pro vytvoření nového diskového oddílu"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Použít existující oddíl"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Není zde žádný existující oddíl k použití"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Použít Windows oddíl jako loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Který diskový oddíl chcete použít pro Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Zvolte velikosti"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Velikost kořenového oddílu v MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Velikost odkládacího oddílu v MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Použít volné místo na Windows oddílu"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Na kterém oddílu chcete měnit velikost?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Počítám hranice souborového systému s Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Změnu velikost FAT není možné provést, \n"
-"vyskytla se následující chyba: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Váš diskový oddíl s Windows je příliš fragmentován, použijte nejdříve\n"
-"program 'defrag'"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROVÁNÍ!\n"
-"\n"
-"DrakX nyní musí zmenšit oddíl s Windows. Buďte opatrní: tato operace je\n"
-"nebezpečná. Pokud jste tak již neučinili, měli byste nejprve ukončit "
-"instalaci,\n"
-"spustit scandisk ve Windows (popřípadě i defrag) a potom instalaci znovu "
-"spustit\n"
-"Také byste si měli data zálohovat. Až si budete jistí, že chcete pokračovat\n"
-"stiskněte Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Jakou velikost oddílu chcete nechat pro Windows na"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "diskovém oddílu %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Změna FAT oddílu neuspěla: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nejsou zde žádné FAT oddíly, které by bylo možné změnit (nebo není dostatek "
-"místa)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Smazat celý disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Odstranit Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Máte více než jeden pevný disk, na který chcete instalovat Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VŠECHNY diskové oddíly a data na disku %s budou zrušena"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Vlastní rozdělení disku"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Použít fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nyní můžete rozdělit váš hardisk %s.\n"
-"Až skončíte, nezapomeňte uložit změny pomocí 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemáte dostatek volného místa na oddílu s Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Nemůžu najít žádné volné místo pro instalaci"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Průvodce DrakX našel následující řešení:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Vytváření diskových oddílů selhalo: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Startuji síť"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Zastavuji síť"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Stala se chyba, ale nevím, jak jí správně interpretovat.\n"
-"Pokračujte na vlastní riziko."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Zdvojený přípojný bod %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Některé důležité balíčky nebyly správně nainstalované.\n"
-"Je možné, že je poškozen CD disk nebo CD-ROM mechanika.\n"
-"Zkontrolujete to použitím příkazu \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Vítá vás %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Není dostupná žádná disketová mechanika"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Začínám '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Váš systém má málo systémových prostředků. Při instalaci Mandrake Linuxu se\n"
-"můžete setkat s různými problémy. Pokud se tak stane, zkuste textovou\n"
-"verzi instalačního programu. Ta se spouští tak, že při startu\n"
-"z CD mechaniky stisknete 'F1' a poté napíšete 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Typ instalace"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Prosím zvolte jednu z následujících instalačních tříd:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Celková velikost zvolených balíčků je přibližně %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Pokud si přejete instalaci na menší prostor než je tento,\n"
-"zvolte si kolik procent balíčků se má nainstalovat.\n"
-"\n"
-"Malý počet procent nainstaluje pouze ty nejdůležitější balíčky, 100%%\n"
-"nainstaluje všechny zvolené."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Na vašem hardisku je místo pouze pro %d%% těchto balíčků.\n"
-"\n"
-"Pokud jich chcete nainstalovat ještě méně, zvolte jiný počet\n"
-"procent. Malý počet procent nainstaluje pouze ty nejdůležitější\n"
-"balíčky, %d%% nainstaluje maximální možné množství balíčků."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Přesněji si budete moci vybrat v příštím kroku"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procent balíčků k instalaci"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Výběr skupiny balíčků"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Výběr jednotlivých balíčků"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Celková velikost: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Špatný balíček"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Jméno: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Verze: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Velikost: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Důležitost: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Nemůžete označit tento balíček, protože pro jeho instalaci není dost místa"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Tyto balíčky budou instalovány"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Tyto balíčky budou odebrány"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Nemůžete vybrat/nevybrat tento balíček"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Toto je nepostradatelný balíček, nemůže být odstraněn"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Nemůžete od-označit tento balíček, protože je už nainstalovaný"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tento balíček musí být obnoven\n"
-"Jste si jisti, že ho nechcete zvolit?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Tento balíček musí být obnoven, nemůžete ho nezvolit"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Ukázat automaticky vybrané balíčky"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalovat"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Uložit/Nahrát na/z disketu/y"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Aktualizuji výběr balíčků"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimální instalace"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Vyberte si balíčky, které chcete nainstalovat"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaluji"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Odhaduji"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Zbývající čas "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Čekejte prosím, připravuji instalaci"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d balíčků(y)"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaluji balíček %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Potvrdit"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odmítnout"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vyměňte prosím CD!\n"
-"\n"
-"Prosím vložte CD označené \"%s\" do mechaniky a stiskněte Ok.\n"
-"\n"
-"Pokud toto CD nemáte, stiskněte Zrušit a toto CD nebude nainstalováno."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Přesto pokračovat?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Stala se chyba při řazení balíčků:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Stala se chyba při instalaci balíčků:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varování\n"
-"\n"
-"Přečtěte si prosím pozorně následující termíny. Pokud s nimi nesouhlasíte,\n"
-"nejste oprávněn pokračovat v instalaci následujícím CD. Stiskněte\n"
-"\"Odmítnout\" pro pokračování v instalaci bez tohoto média.\n"
-"\n"
-"\n"
-"Některé programy na dalším CD médiu nejsou šířeny podle licence GPL či\n"
-"podobné. Každý z těchto programů je šířen podle vlastní licence a podmínek.\n"
-"Čtete pozorně tyto licence a podmínky před tím, než začnete daný software\n"
-"používat nebo šířit.\n"
-"Některé licence zakazují přenášení, vytváření duplikatů (mimo záložní "
-"kopii),\n"
-"další šíření, dekompilaci, reverzní engineering nebo modifikaci komponent.\n"
-"Každé porušení podmínek okamžitě přerušuje vaše práva podle dané licence.\n"
-"I když dané licence dávají nějaká práva, není dovoleno instalovat daný\n"
-"program na více systémů, přizpůsobovat ho provozu na síti. V případě\n"
-"pochybností kontaktujte distributora nebo výrobce daného programu.\n"
-"Přenechání práv třetím osobám nebo kopírování části komponent či\n"
-"dokumentace je také zakázáno.\n"
-"\n"
-"\n"
-"Všechna práva na programy na dalším CD médiu patří jejím právoplatným\n"
-"vlastníkům podle autorského zákona.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Stala se chyba"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Chcete opravdu ukončit instalaci?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Souhlas s licencí"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Uvod\n"
-"\n"
-"Operacni system a ruzne casti dostupne v distribuci Mandrake Linux jsou "
-"nazyvany \"Softwarove produkty\" (\"Software Products\"). Softwarové "
-"produkty zahrnuji, ale nejsou omezeny, na programy, metody pravidla a "
-"dokumentaci vztahujici se k operacnimu systemu a dalsim komponentam "
-"distribuce Mandrake Linux.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klávesnice"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Vyberte si rozložení vaší klávesnice."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Zde je kompletní seznam dostupných klávesnic"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Který typ instalace chcete?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalace/Aktualizace"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Je to instalace nebo aktualizace?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Doporučená"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expertní"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aktualizovat"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Aktualizovat pouze balíčky"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Vyberte si typ vaší myši."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Připojení myši"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Ke kterému sériovému portu je připojena vaše myš?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulace tlačítek"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulace 2 tlačítka"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulace 3 tlačítka"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavuji PCMCIA karty..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Nastavuji IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nejsou dostupné žádné diskové oddíly"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Hledám oddíly, které lze připojit"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Zvolte si přípojné(mount) body"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nemůžu přečíst vaši tabulku oddílů, je pro mě příliš porušená :(\n"
-"Můžu se pokusit pokračovat v čištění špatných oddílů (VŠECHNA\n"
-"DATA budou ztracena!). Jiná možnost je zakázat DrakX měnit tabulku\n"
-"oddílů (chyba je %s)\n"
-"\n"
-"Souhlasíte s tím, že příjdete o všechny oddíly?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake neuspěl při čtení tabulky oddílů.\n"
-"Pokračujte pouze na vlastní riziko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Pro bootstrap není potřebné místo o velikosti 1MB! Instalace může pokračovat "
-"ale pro spuštění systému musíte vytvořit bootstrap oddíl pomocí DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Nebyl nalezen kořenový oddíl pro provedení aktualizace"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Kořenový oddíl"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Který diskový oddíl je kořenový (/) ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Musíte restartovat počítač aby se projevily změny v tabulce oddílů"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Zvolte diskové oddíly které chcete naformátovat"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Otestovat na vadné stopy?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formátuji oddíly"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytvářím a formátuji soubor %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Není dostatek odkládacího prostoru k instalaci, prosím přidejte nějaký"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Hledám dostupné balíčky"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Vyhledávám balíčky pro aktualizaci"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Na vašem systému není dostatek místa pro instalaci nebo aktualizaci (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletní (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimální (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Doporučená (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vyberte si, zda chcete uložit nebo nahrát výběr balíčků na disketu.\n"
-"Formát výběru je stejný jako formát automaticky generované diskety."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Nahrát z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Nahrávám z diskety"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Výběr balíčků"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Vložte disketu obsahující výběr balíčků"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Uložit na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Velikost vybraných balíčků je větší než místo na disku"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Typ instalace"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nevybrali jste žádnou skupinu balíčků\n"
-"Vyberte si prosím alespoň minimální instalaci"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X prostředí"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Základní dokumentace (doporučeno!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Opravdu minimální instalace (speciálně bez urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Pokud máte všechna CD vypsaná níže, klepněte na Ok.\n"
-"Pokud nemáte žádné z nich, klepněte na Zrušit.\n"
-"Pokud Vám chybí pouze některé z nich, odznačte je, a zvolte Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM označené \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Připravuji instalaci"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaluji balíček %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Nastavení po instalaci"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Vložte prosím spouštěcí disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Vložte prosím disketu s moduly do %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nyní si můžete stáhnout šifrovací software.\n"
-"\n"
-"VAROVÁNÍ:\n"
-"\n"
-"Kvůli různým obecným požadavkům a nařízením různých soudních úřadů,\n"
-"vztahujícím se na tento druh software, by se měl zákazník a/nebo koncový\n"
-"uživatel ujistit, zda mu jeho soudní správa umožňuje stáhnout si, uložit\n"
-"a používat tento software.\n"
-"\n"
-"Zákazník a/nebo koncový uživatel by si měl být vědomý toho, že nesmí\n"
-"přestupovat zákony své jurisdikce. Pokud zákazník a/nebo koncový uživatel\n"
-"nebude respektovat ustanovení vztahujících se zákonů, může se vystavit\n"
-"postihu.\n"
-"\n"
-"V každém případě se Mandrakesoft i jeho výrobny a dodavatelé vzdávají\n"
-"jakékoliv zodpovědnosti za přímé i nepřímé škody (včetně ztráty zisků,\n"
-"přerušení podnikání, ztráty obchodních informací, jakožto i jiných "
-"peněžních\n"
-"ztrát a eventuálních postihů, požadavků na odškodnění a žalob) vzniklé\n"
-"vlastnictvím, používáním nebo pouhým stahováním tohoto software, ke kterému\n"
-"může mít zákazník a/nebo nebo koncový uživatel přístup když odsouhlasí\n"
-"tuto dohodu.\n"
-"\n"
-"\n"
-"Pokud máje jakékoliv dotazy vztahující se k této dohodě, kontaktujte prosím\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Nyní máte možnost stáhnout aktualizované balíčky, které byly\n"
-"uvolněny po vydání distribuce.\n"
-"\n"
-"Můžete tak získat bezpečnostní opravy či opravy chyb, ale\n"
-"potřebujete připojení k Internetu.\n"
-"\n"
-"Chcete nainstalovat aktualizace?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Kontaktuji web Mandrake Linux pro získání seznamu dostupných zrcadel"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Zvolte si zrcadlo(mirror) pro stahování balíčků"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Stahuji ze zrcadla(mirror) seznam dostupných balíčků"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Jaké je vaše časové pásmo?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarové hodiny nastaveny na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatická synchronizace času (pomocí NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Vzdálený CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Bez tiskárny"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Máte nějakou zvukovou kartu na ISA sběrnici?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Pro nastavení zvukové karty spusťte po instalaci \"sndconfig\"."
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nebyla nalezena zvuková karta. Zkuste spustit po instalaci \"harddrake\"."
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Souhrn"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Myš"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Časová zóna"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Tiskárna"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN karta"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvuková karta"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV karta"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokální soubory"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Hlavní(root) heslo"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez hesla"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Toto heslo je příliš jednoduché (musí být alespoň %d znaků dlouhé)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Ověření"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Ověření pomocí LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Základní dn pro LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Ověření pomocí NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Doména"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Pomocí startovací diskety je možné spustit systém Linux bez závislosti na\n"
-"zavaděči systému. To je užitečné třeba v případě, že nechcete instalovat "
-"SILO\n"
-"na počítač, nebo jiný operační systém SILO přepsal nebo SILO nepracuje "
-"správně\n"
-"s hardwarovou konfigurací. Vlastní startovací disketa je také užitečná "
-"tehdy,\n"
-"pokud je potřeba provést opravu systému po předchozím selhání.\n"
-"\n"
-"Pokud chcete vytvořit startovací disketu, vložte disketu do mechaniky\n"
-"a stiskněte \"OK\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "první mechaniky"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "druhé mechaniky"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Přeskočit"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Pomocí startovací diskety můžete spustit Linux bez použití normálního\n"
-"zaváděcího programu (bootloader). To je užitečné pokud nechcete instalovat\n"
-"LILO (nebo Grub), nebo jiný operační systém odstraní LILO, nebo LILO\n"
-"na vašem počítači nefunguje. Vlastní startovací disketa také může být\n"
-"použita spolu s \"Mandrake záchranným diskem\" (rescue image), což "
-"poskytuje\n"
-"účinnou pomoc při havárii systému. Chcete vytvořit startovací disketu?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(VAROVÁNÍ! Pro kořenový oddíl používáte XFS, vytvoření \n"
-"spouštěcí diskety bude zřejmě neúspěšné, protože XFS\n"
-"potřebuje velmi velký ovladač)"
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Bohužel není dostupná žádná disketová mechanika"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Zvolte mechaniku, kde chcete vytvořit startovací disketu"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Vložte disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Vytvářím startovací disketu"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Připravuji zaváděcí program"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Zdá se, že máte nějaký neznámý počítač,\n"
-"na kterém nebude yaboot pracovat.\n"
-"Instalace bude pokračovat, ale budete\n"
-"potřebovat BootX pro spuštění systému."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Chcete použít aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Stala se chyba při instalaci aboot,\n"
-"mám se pokusit o instalaci i když to zruší první oddíl na disku?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaluji zaváděcí program"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalace zaváděcího programu neuspěla. Stala se tato chyba:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Můžete potřebovat změnit startovací zařízení pro Open Firmware\n"
-" pro aktivaci spouštěcího programu. Pokud nevidíte po spuštění prompt,\n"
-" stiskněte při startu Command-Option-O-F a zadajte:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Potom zadejte: shut-down\n"
-"Při dalším spuštění už uvidíte prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Vložte prázdnou disketu do %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Vytvářím disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Některé kroky nebyly dokončeny.\n"
-"\n"
-"Chcete opravdu nyní skončit?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Gratulujeme vám, instalace je dokončena.\n"
-"Vyjměte startovací média a stiskněte return pro restart.\n"
-"\n"
-"\n"
-"Na opravy této instalace systému Mandrake Linux se lze informovat\n"
-"na stránce Errata:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informace o konfiguraci systému po instalaci jsou dostupné\n"
-"v dané kapitole oficiální uživatelské příručky pro Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Vytvořit disketu pro automatickou instalaci"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Instalace může být v případě potřeby plně automatická,\n"
-"ale použije se celý disk!!!\n"
-"(v případě instalace na druhý počítač)\n"
-"\n"
-"Takto lze jednoduše zopakovat instalaci.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automaticky"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Zopakovat"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Uložit výběr jednotlivých balíčků"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Instalace %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> přepn. mezi prvky | <Space> výběr | <F12> další obraz."
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "chybí kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "chybí consolehelper"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Vyberte soubor"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Rozšíření"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Základní"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Prosím počkejte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informace"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Rozbal větev"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sbal větev"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Přepnutí mezi abecedním a skupinovým řazením"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Špatná volba, zkuste to znovu\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vaše volba? (výchozí %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Položky, které je potřeba vyplnit:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Vaše volba? (0/1, výchozí '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Tlačítko '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Chcete kliknout na toto tlačítko? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Vaše volba? (výchozí '%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Je zde více voleb, ze kterých je možné si vybrat (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vyberte si prosím první číslo z výběru, které chcete editovat,\n"
-"nebo stiskněte Enter pro pokračování.\n"
-"Vaše volba? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Oznamuji změnu návěští:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Znovu odeslat"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "České (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Německé"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvořák"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Španělské"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finské"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francouzské"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norské"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polské"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruské"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Švédské"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK-Britské"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US-Americké"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albánské"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Arménské (staré)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Arménské (psací stroj)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Arménské (foneticky)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Ázerbajdžánské (latinka)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgické"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulharské (foneticky)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulharské (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilské (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Běloruské"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Švýcarské (Německý styl)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Švýcarské (Francouzský styl)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "České (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Německé (bez mrtvých kláves)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dánské"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvořák (US) "
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvořák (Norské)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvořák (Švédské) "
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonské"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzínské (\"Ruské\" rozložení)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzínské (rozložení \"Latin\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Řecké"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Maďarské"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Chorvatské"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelské"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelské (foneticky)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Íránské"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandské"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italské"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japonská 106 kláves"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejská klávesnice"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinsko-Americké"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litevské AZERTY (stará)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litevské AZERTY (nová)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litevské \"číselná řada\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litevské \"foneticky\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latevské"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonské"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandské"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polské (rozložení QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polské (rozložení QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalské"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadské (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunské (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunské (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruské (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovinské"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovenské (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovenské (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srbské (cyrilice)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamilské"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thajské"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadžiská klávesnice"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turecké (tradiční model \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turecké (moderní model \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinské"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US (mezinárodní)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamská \"číselná řada\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslávské (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Pravá klávesa Alt"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Obě klávesy Shift současně"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Control a Shift současně"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Klávesa CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl a Alt současně"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt a Shift současně"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Klávesa \"Menu\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Levá klávesa \"Windows\""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Pravá klávesa \"Windows\""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Propletené přípojné body %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Odeberte nejdříve logické disky\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Podpora PCMCIA již není dostupná pro kernely 2.2. Použijte prosím řadu 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - myš"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standardní PS2 myš s kolečkem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 tlačítko"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Standardní dvoutlačítková myš"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Obecná"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "S kolečkem"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "Sériová"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Standardní třítlačítková myš"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech série CC (sériová)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sériová, starý C7 typ)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 tlačítka"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 tlačítka"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "Žádná"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Bez myši"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Vyzkoušejte prosím, zda funguje myš"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Vyzkoušejte na myši,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "TOČIT KOLEČKEM!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Ukončit"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Další ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Předchozí"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Je to správně?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Připojení k Internetu"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Nejběžněji se pro připojení pomocí adsl používá pppoe.\n"
-"Některá připojení používají pptp, některá pouze dhcp. Jestli si nejste "
-"jistí, zvolte 'použít pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "použít dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "použít pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "použít pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kterého dhcp klienta chcete použít?\n"
-"Standardní je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ve vašem počítači nebyl nalezen žádný síťový adaptér.\n"
-"Nemohu nastavit typ spojení."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Zvolte síťové rozhraní"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vyberte si prosím, který síťový adaptér chcete použít pro připojení k "
-"internetu"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "nebyla nalezena síťová karta"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Nastavuji síť"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Prosím zadejte jméno vašeho počítače, protože ho vyžadují některé\n"
-"DHCP servery. Toto jméno musí být úplné, jako například\n"
-"'mybox.mylab.myco.com'."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Jméno počítače"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Průvodce nastavením sítě"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externí ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interní ISDN karta"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Jaké je vaše ISDN připojení?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Kterou ISDN konfiguraci preferujete?\n"
-"\n"
-"* Starou, použitou pro isd4net. Ta obsahuje výkonné nástroje,\n"
-" ale je choulostivá na konfiguraci a není standardní.\n"
-"\n"
-"* Novou konfiguraci, snazší pro porozumění, více standardní,\n"
-" ale s méně nástroji.\n"
-"\n"
-"Doporučujeme vybrat si snazší novou konfiguraci.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nová konfigurace (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stará konfigurace (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Nastavení ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vyberte si svého poskytovatele internetu.\n"
-" Pokud není na seznamu, vyberte si Jiný"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Evropský protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Evropský protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol použitý ve zbytku světa"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol použitý ve zbytku světa \n"
-" žádný D-kanál (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Který protokol chcete použít?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Jaký typ karty máte?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Nevím"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jestli máte ISA kartu, měly by být hodnoty na následující obrazovce "
-"správné.\n"
-"\n"
-"Jestli máte PCMCIA kartu, musíte znát její IRQ a IO.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Přerušit"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Pokračovat"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kterou z těchto ISDN karet máte?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Našel jsem ISDN PCI kartu, jejíž typ ale neznám. Prosím zvolte si jednu z "
-"následujícího seznamu PCI karet."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nenašel jsem žádnou ISDN PCI kartu. Prosím zvolte si jednu z následující "
-"nabídky"
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ke kterému sériovému portu je váš modem připojen?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Možnosti vytáčení"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Jméno připojení"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonní číslo"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Přihlašovací jméno"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Podle scénáře"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Pomocí terminálu"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Jméno domény"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "První DNS Server (nepovinný)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Druhý DNS Server (nepovinný)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Můžete se odpojit nebo překonfigurovat připojení."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Můžete překonfigurovat připojení."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "V současnosti jste připojeni k Internetu"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Nemůžete se připojit k Internetu nebo překonfigurovat připojení."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "V současnosti nejste připojeni k Internetu."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Připojit"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Odpojit"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Nastavit připojení"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Nastavení a připojení k internetu"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nyní se připravuje konfigurace %s připojení."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nyní se bude konfigurovat připojení %s.\n"
-"\n"
-"\n"
-"Stiskněte OK pro pokračování."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Nastavení sítě"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Protože provádíte instalaci po síti, je již síť nastavena.\n"
-"Klikněte na Ok pro zachování nastavení nebo klikněte na Zrušit pro nové "
-"nastavení připojení Internetu a k síti.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Vítá vás průvodce připojením k síti\n"
-"\n"
-"Nyní lze nastavit připojení k síti nebo internetu.\n"
-"Pokud nechcete použít automatickou detekci, odznačte políčko.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Zvolte profil pro nastavení"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Použít autodetekci"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detekuji zařízení..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Modemové připojení"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detekováno na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN připojení"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detekováno %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL připojení"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detekováno na rozhraní %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelové připojení"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detekováno kabelové připojení"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Připojení k LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "detekovaná(é) síťová(é) karta(y)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Zvolte si připojení, které chcete nastavit"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Máte nastaveno více způsobů, jak se připojit k Internetu.\n"
-"Vyberte si jeden, který chcete použít.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetové připojení"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete se automaticky připojovat po startu počítače?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Nastavení sítě"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Je potřebné znovu spustit síť"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Vyskytl se problém při restartu sítě: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Gratulujeme, konfigurace sítě a internetu je ukončena.\n"
-"\n"
-"Konfigurace bude nyní aktivována.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Doporučujeme po tomto kroku restartovat X Window,\n"
-"aby se předešlo problémům se změnou jména počítače."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Vyskytl se problém během konfigurace.\n"
-"Otestujte připojení k Internetu pomocí net_monitor nebo mcc. Pokud není "
-"spojení funkční, bude potřeba asi znovu načíst konfiguraci"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VAROVÁNÍ: Toto zařízení již bylo nastaveno pro připojení k Internetu.\n"
-"Klikněte na Ok pro zachování nastavení.\n"
-"Modifikace následujících položek přepíše toto nastavení."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Prosím zadejte IP nastavení pro tento počítač.\n"
-"Každá položka musí být zadána jako IP adresa v 'desetinné' formě\n"
-"(například 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Nastavuji síťové zařízení %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (ovladač %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Maska sítě"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatická IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa musí být ve formátu 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Prosím zadejte jméno vašeho počítače.\n"
-"Toto jméno musí být úplné, jako 'mybox.mylab.myco.com'.\n"
-"Pokud používáte bránu(gateway), můžete také zadat její adresu"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Brána (např. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Zařízení brány(gateway)"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Nastavení proxy"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Sledovat id síťové karty (užitečné u notebooků)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy by měla být http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy by měla být ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Nastavení Internetu"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete se nyní pokusit připojit k internetu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testuji připojení k internetu..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Počítač je nyní připojen k internetu"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Z bezpečnostních důvodů bude spojení ukončeno."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Nepodařilo se připojit k Internetu.\n"
-"Pokuste se překonfigurovat dané připojení."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Nastavení připojení"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Prosím vyplňte nebo zkontrolujte následující údaje"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO karty"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Vaše osobní telefonní číslo"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Jméno poskytovatele (např provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonní číslo poskytovatele"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS poskytovatele č.1 (volitelné)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS poskytovatele č.2 (volitelné)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Výběr si zemi"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Typ vytáčení"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Rychlost připojení"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Prodleva připojení (vteřiny)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Váš účet (uživatelské jméno)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Heslo vašeho účtu"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "chyba připojování: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Rozšířené diskové oddíly nejsou na tomto systému podporovány"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Ve tabulce diskových oddílů je mezera, ale nemohu ji použít.\n"
-"Jediné řešení je přesunout primární oddíly tak, abyste měli mezeru vedle\n"
-"rozšířených oddílů."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnova ze souboru %s neuspěla: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Špatný záložní soubor"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Chyba při zapisování do souboru %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Něco špatného se stalo s pevným diskem. \n"
-"Test na integritu dat selhal. \n"
-"To znamená, že zápis na tento disk může skončit nepředvídaně"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "musíte mít"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "důležité"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "nejméně důležité"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "nedůležité"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "může se hodit"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Tiskový Systém pro Unix"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nové generace"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Démon pro tiskárny"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Tisk bez ukládání do fronty"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Místní tiskárna"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Vzdálená tiskárna"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Tiskárna na vzdáleném CUPS serveru"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Tiskárna na vzdálený lpd serveru"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Síťová tiskárna (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tiskárna na serveru Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Tiskárna na Netware serveru"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Zadejte URI tiskového zařízení"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Poslat tiskovou úlohu do příkazu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Neznámý model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Místní tiskárny"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Vzdálené tiskárny"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " na paralelním portu \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB tiskárna \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multifunkční na paralelním portu \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multifunkční zařízení na USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunkční zařízení na HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multifunkční zařízení"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", při tisku na %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", tiskárna \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP hostitel \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "na serveru Windows \"%s\", sdílená jako \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "na severu Novell \"%s\", tiskárna \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", používá příkaz %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Přímý tisk (bez ovladače)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na tomto počítači)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na serveru CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Výchozí)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Zvolte připojení tiskárny"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Jak je tiskárna připojena?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"V případě vzdáleného CUPS serveru nemusíte nastavovat tiskárny zde,\n"
-"tiskárny budou automaticky detekovány."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Nastavení CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Zadejte CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Při tisku na vzdálený CUPS server v lokální síti není potřeba nic "
-"nastavovat, CUPS server bude automaticky informovat o jeho tiskárnách. "
-"Všechny známé tiskárny pro tento počítač jsou nyní vypsány v poli \"Vzdálené "
-"tiskárny\". v hlavní sekci nástroje Printerdrake. Pokud je CUPS na jiné "
-"síti, musíte pro získání informací zadat IP adresu CUPS serveru a také "
-"případně číslo portu, jinak nechte toto pole prázdné."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Ve většině případů je CUPS automaticky správně nastaven v závislosti na\n"
-"síťovém prostředí tak, aby bylo možné tisknout na tiskárnách umístěných\n"
-"na CUPS serverech v síti. Pokud je nastavení nesprávné, vypněte\n"
-"\"Automatické nastavení pro CUPS\" a editujte soubor /etc/cups/cupsd.conf\n"
-"ručně. Nezapomeňte potom CUPS restartovat (příkaz: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa musí být ve formátu 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Číslo portu musí být celé číslo!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP adresa CUPS serveru"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatické nastavení pro CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Detekuji zařízení ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Otestovat porty"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Přidat novou tiskárnu"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Vítejte v průvodci nastavením tisku\n"
-"\n"
-"Tento průvodce vám pomůže nainstalovat lokální nebo vzdálené tiskárnu(y), "
-"které je možné následně využít na vzdáleném počítači na síti.\n"
-"\n"
-"Budete dotázáni na všechny potřebné informace pro nastavení tiskárny, můžete "
-"si vybrat se všech tiskových ovladačů a typů připojení tiskárny."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Místní tiskárna"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Vítejte v průvodci nastavením tisku\n"
-"\n"
-"Tento průvodce vám pomůže nainstalovat tiskárnu(y), která je připojena k "
-"tomuto počítači.\n"
-"\n"
-"Připojte prosím tiskárnu(y) k počítači a zapněte ji. Pokud je vše "
-"připraveno, klikněte na tlačítko \"Další\" nebo na tlačítko \"Zrušit\", "
-"pokud tiskárnu nechcete nyní nastavit.\n"
-"\n"
-"Může se stát, že některé počítače mohou zatuhnout při automatické detekci a "
-"tehdy lze použít \"Expertní režim\" pro instalaci bez automatické detekce. "
-"\"Expertní režim\" použijte také tehdy, pokud chcete nastavit vzdálenou "
-"tiskárnu(y) a printerdrake ji/je automaticky nenabídnul."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatická detekce tiskáren"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Blahopřejeme, tiskárna je instalována a nastavena!\n"
-"\n"
-"Tisknout z aplikací lze příkazem \"Tisk\" (obyčejně v menu \"Soubor\").\n"
-"\n"
-"Pokud chcete přidat, odebrat, přejmenovat tiskárnu nebo změnit její výchozí "
-"hodnoty (typ zásobníku, kvalita tisku,...), zvolte \"Tiskárna\" v sekci "
-"\"Hardware\" v řídícím centru Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatická detekce tiskáren"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake dokáže automaticky detekovat tiskárny připojené přes paralelní "
-"nebo USB rozhraní, ale na některých systémech může automatická detekce "
-"ZMRAZIT SYSTÉM A TAKÉ POŠKODIT SOUBORY! Provádíte to tedy na VLASTNÍ "
-"NEBEZPEČÍ!\n"
-"\n"
-"Chcete opravdu použít automatickou detekci tiskárny?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Provést autodetekci"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Nastavit tiskárnu manuálně"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detekováno %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Tiskárna na paralelním portu \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB tiskárna \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Lokální tiskárna nenalezena! Pro ruční instalaci tiskárny zadejte jméno "
-"zařízení/souboru do políčka (Paralelní porty: /dev/lp0, /dev/lp1,... jsou "
-"ekvivalentní LPT1:, LPT2:, ...,první USB tiskárna: /dev/usb/lp0, druhá USB "
-"tiskárna: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Musíte zadat zařízení nebo jméno souboru!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Místní tiskárna nenalezena!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Síťové tiskárny mohou být nainstalovány až po instalaci systému. V řídícím "
-"centru Mandrake vyberte \"Hardware\" a potom \"Tiskárna\"."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Pro instalaci síťových tiskáren klikněte nejdříve na \"Zrušit\", přejděte do "
-"\"Expertního režimu\" a potom opět klikněte na \"Přidat novou tiskárnu\"."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Tyto tiskárny byly automaticky detekovány, pokud není mezi nimi požadovaná "
-"tiskárna, zadejte do políčka jméno zařízení/jméno souboru"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Zde je seznam všech automaticky rozpoznaných tiskáren. Vyberte si tiskárnu, "
-"kterou chcete nastavit nebo zadejte do políčka jméno zařízení/jméno souboru"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Byla automaticky detekována tato tiskárna. Konfigurace této tiskárny je plně "
-"automatická. Pokud nebyla tiskárna správně detekována nebo preferujete "
-"vlastní nastavení tisku, zvolte \"Ruční konfigurace\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Tyto tiskárny byly automaticky detekovány. Konfigurace těchto tiskáren je "
-"plně automatická. Pokud nebyla tiskárna správně detekována nebo preferujete "
-"vlastní nastavení tisku, zvolte \"Ruční konfigurace\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Vyberte si port, ke kterému je tiskárna připojena nebo zadejte do políčka "
-"jméno zařízení/jméno souboru"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Vyberte port, ke kterému je vaše tiskárna připojena."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralelní porty: /dev/lp0, /dev/lp1,... je ekvivalentní LPT1:, LPT2:, ...,"
-"první USB tiskárna: /dev/usb/lp0, druhá USB tiskárna: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Musíte vybrat/zadat tiskárnu/zařízení!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ruční nastavení"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Je vaše tiskárna multifunkční zařízení od HP (OfficeJet, PSC, PhotoSmart "
-"LaserJet 1100/1200/1220/3200/3300 se skenerem)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instaluji balíček HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Testují zařízení a nastavuji HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instaluji balíček SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skenování na multifunkčním zařízení od HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Zpřístupňuji tiskový port pro CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Načítám databázi tiskáren ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Možnosti vzdálené lpd tiskárny"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Abyste mohli používat vzdálenou tiskovou frontu lpd, musíte zadat jméno "
-"tiskového serveru a jméno tiskárny, kam má být posílán tisk."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Jméno vzdáleného počítače"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Jméno vzdálené tiskárny"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Chybí jméno vzdáleného počítače!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Chybí jméno vzdálené tiskárny!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Možnosti SMB (Windows 9x/NT) tiskárny"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Abyste mohli tisknout na SMB tiskárně, musíte zadat jméno SMB počítače"
-"(Pozor! To může být odlišné od jeho TCP/IP jména) a možná i IP adresu "
-"tiskového serveru, jméno sdílené tiskárny, vhodné uživatelské jméno, heslo a "
-"informace o pracovní skupině."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Jméno SMB serveru"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP adresa SMB serveru"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Sdílené jméno"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Pracovní skupina"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Musí být zadáno buď jméno serveru nebo jeho IP adresa!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Chybí jméno pro sdílení přes Sambu!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "BEZPEČNOSTNÍ VAROVÁNÍ!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Provádíte nastavení tisku s účtem na systému Windows. Kvůli chybě v klientu "
-"protokolu Samba je heslo při tisku posláno jako čistý text z příkazové "
-"řadky. Je tudíž možné, aby kdokoliv viděl toto heslo na obrazovce když si "
-"zadá příkaz např. \"ps auxwww\".\n"
-"\n"
-"Doporučujeme používat jednu z následujících alternativ (ve všech případech "
-"je dobré mít nastaven přístup pouze z počítačů z lokální sítě, respektivě za "
-"firewalem):\n"
-"\n"
-"Použít účet, který nemá nastaven žádné heslo, jako je \"GUEST\" nebo "
-"speciální účet pouze pro účely tisku. Neodstraňujte ochranu heslem z běžného "
-"účtu nebo dokonce z administrátorského účtu.\n"
-"\n"
-"Nastavte tiskárnu na Windows serveru tak, aby fungovala pod LPD protokolem. "
-"Potom nastavte tisk na této tiskárně pomocí typy spojení \"%s\" v aplikaci "
-"Printerdrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Nastavit na serveru s Windows tiskárnu, která bude přístupná pomocí IPP "
-"protokolu a nastavit tisk z tohoto počítače pomocí spojení \"%s\" v aplikaci "
-"Printerdrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Připojit tiskárnu k Linux serveru a nechat počítač(e) s Windows pracovat "
-"jako klienty.\n"
-"\n"
-"Chcete opravdu pokračovat v nastavení tiskárny tímto způsobem?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Možnosti NetWare tiskárny"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Abyste mohli tisknout na NetWare tiskárně, musíte zadat jméno NetWare "
-"serveru (Pozor! To může být odlišné od jeho jména pro TCP/IP!), jméno "
-"tiskové fronty tiskárny, kterou chcete používat, uživatelské jméno a heslo."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Tiskový server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Jméno tiskové fronty"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Chybí jméno pro sdílení přes NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Chybí jméno tiskové fronty pro NCP!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Možnosti tiskárny pro TCP/socket"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Abyste mohli tisknout na TCP nebo socketové tiskárně, musíte zadat jméno "
-"počítače s tiskárnou a volitelně i číslo portu. Pokud máte HP JetDirect, "
-"port je obvykle 9100, jinak se může měnit. Podívejte do manuálu k vašemu "
-"hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Jméno počítače s tiskárnou"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Chybí jméno počítače s tiskárnou!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI Tiskového Zařízení"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Zde lze přímo zadat URI pro přístup k tiskárně. URI musí splňovat buď "
-"specifikaci CUPS nebo Foomatic. Taky pamatujte na to, že všechny URI nejsou "
-"podporovány ve všech tiskových správcích."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Musí být zadáno správné URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Každá tiskárna potřebuje jméno (např. \"tiskarna\"). Popis a umístění nemusí "
-"být vyplněny. Jsou to komentáře pouze pro uživatele."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Jméno tiskárny"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Popis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Umístění"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Načítám databázi tiskáren ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model tiskárny"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake provedl porovnání modelu tiskárny, který byl zjištěn při auto-"
-"detekci s modelem obsaženým v jeho databázi a nabídnul nejlepší řešení. Tato "
-"volba může být špatná, zvlášť pokud není tiskárna obsažena v databázi. "
-"Zkontrolujte, zda je volba správná a klepněte na \"Zvolený model je správný"
-"\" a pokud není, volte \"Vybrat model ručně\". V další obrazovce potom bude "
-"možné vybrat model tiskárny ručně.\n"
-"\n"
-"Pro vaši tiskárnu Printerdrake nalezl:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Zvolený model je správný"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Vybrat model ručně"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Výběr modelu tiskárny"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Jaký model tiskárny máte?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Zkontrolujte prosím, zda Printerdrake provedl automatickou detekci modelu "
-"správně. Pokud je vyznačen nesprávný model, můžete ho změnit výběrem ze "
-"seznamu nebo zvolte \"Raw printer\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Pokud není tiskárna v seznamu, vyberte kompatibilní nebo podobný model "
-"(podívejte se do manuálu)"
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Nastavení pro OKI win-tiskárnu"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Nyní nastavujete laserovou tiskárnu OKI winprinter. Tyto tiskárny používají "
-"velmi specifický komunikační protokol a mohou pracovat pouze pokud jsou "
-"připojeny k prvnímu paralelnímu portu. Pokud je tiskárna připojena na jiný "
-"port, nebo se tiskne přes server, připojte tiskárnu na první paralelní port. "
-"Jinak tisk nebude pracovat. Typ připojení bude ovladač ignorovat."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Nastavení inkoustové tiskárny Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkoustové tiskárny dodávané firmou Lexmark podporují pouze tisk na lokální "
-"tiskárně, takže nelze tisknout přes vzdálený server. Prosím připojte "
-"tiskárnu na lokální port nebo ji nastavte na tom počítači, ke kterému bude "
-"připojena."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Aby bylo možné tisknout na inkoustových tiskárnách od firmy Lexmark, je "
-"potřeba mít tiskový ovladač. Na stránce (http://www.lexmark.com/) klikněte "
-"na tlačítko \"Drivers\" a vyberte váš model tiskárny. Potom zvolte Linux "
-"jako operační systém. Ovladače jsou v RPM balíčcích nebo mají interaktivní "
-"instalaci. Tu ale nepotřebujete. Ukončete instalační program ihned po "
-"odsouhlasení licence. Pak můžete nastavit chování tiskové hlavy pomocí "
-"tohoto programu."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Výchozí nastavení pro tiskárnu\n"
-"\n"
-"Ujistěte se, že typ stránky a typ inkoustu/režim tisku (pokud je) a také "
-"hardwarová konfigurace laserové tiskárny (paměť, duplexní jednotka, externí "
-"podavač) jsou nastaveny správně. Při tisku ve velmi vysoké kvalitě/rozlišení "
-"bude tisk zřejmě pomalejší."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Hodnota %s musí být celé číslo!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Hodnota %s musí být číslo!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Hodnota %s je mimo rozsah!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Chcete opravdu nastavit tiskárnu \"%s\"\n"
-"jako výchozí?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testovací stránka"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Vyberte si testovací stránku, kterou chcete vytisknout.\n"
-"Poznámka: tisk testovací stránky s fotografií může trvat velmi dlouho nebo "
-"se na tiskárně s málo pamětí nemusí podařit vůbec. Ve většině případů stačí "
-"vytisknout běžnou testovací stránku."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Bez testovací stránky"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Tisk"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardní testovací stránka"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativní testovací stránka (letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativní testovací stránka (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Testovací stránka s fotografií"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Netisknout testovací stránku"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Tisknu testovací stránku(y)"
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Zkušební stránka(y) byla(y) poslána(y) na tiskárnu.\n"
-"Může chvilku trvat než začne tisk.\n"
-"Stav tisku:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Zkušební stránka byl poslána na tiskárnu.\n"
-"Může chvilku trvat než začne tisk.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Proběhl tisk správně ?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Přímý tisk na tiskárnu"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Vytisknout soubor z příkazové řádky (terminálového okna) lze buď příkazem\n"
-"\"%s<soubor>\" nebo přes grafické nástroje: \"xpp <soubor> nebo \"kprinter "
-"<soubor>\". Grafické nástroje umožňují jednoduše vybrat tiskárny a měnit "
-"jejich parametry.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tyto příkazy lze nastavit do políčka \"Příkazy tisku\" v dialogu tisku ve "
-"většině aplikací, ale nezadává se zde jméno souboru, které je pokaždé jiné v "
-"závislosti na dané aplikaci.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Příkaz \"%s\" dovoluje modifikovat volby pro každou tiskovou úlohu. "
-"Jednoduše zadejte potřebné nastavení do příkazové řádky, např. \"%s<soubor>"
-"\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Všechny možnosti pro současnou tiskárnu jsou zobrazeny níže, nebo klikněte "
-"na tlačítko \"Možnosti tiskárny\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Zde je seznam dostupných voleb pro nastavení tisku pro aktuální tiskárnu:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pro vytištění souboru z příkazové řádky (v terminálovém okně) použijte "
-"příkaz \"%s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tento příkaz lze nastavit do políčka \"Příkazy tisku\" v dialogu tisku ve "
-"většině aplikací, ale nezadává se zde jméno souboru, které je pokaždé jiné v "
-"závislosti na dané aplikaci.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Všechny možnosti tisku pro současnou tiskárnu jsou zobrazeny níže, nebo "
-"klikněte na tlačítko \"Možnosti tiskárny\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pro vytištění souboru z příkazové řádky (v terminálovém okně) použijte "
-"příkaz \"%s<soubor>\" nebo \"%s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Lze také použít grafické rozhraní \"xpdq\" pro nastavení možností a ke "
-"správětiskových úloh.\n"
-"Pokud používáte grafické prostředí KDE, máte na pracovní ploše ikonu,\n"
-"pojmenovanou \"STOP Printer!\", který po kliknutí ihned zastaví "
-"všechnytiskové úlohy. To je vhodné třeba pro případy uváznutí papíru.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Příkazy \"%s\" a \"%s\" dovolují modifikovat volby pro každou tiskovou "
-"úlohu. Jednoduše zadejte potřebné nastavení do příkazové řádky, např. \"%"
-"s<soubor>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zavřít"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tisknu/skenuji na \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tisknu na tiskárnu \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Možnosti tiskárny"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Multifunkční zařízení od HP bylo nastaveno pro možnost skenování. Nyní lze "
-"skenovat příkazem \"scanimage\" (\"scanimage -d hp:%s\" zvolíte požadovaný "
-"skener) z příkazového řádku nebo z grafického prostředí pomocí \"xscanimage"
-"\" nebo \"xsane\". Pokud používáte program GIMP, můžete také skenovat "
-"výběrem z nabídky \"Soubor\"/\"Získat\". Více informací získáte příkazem "
-"\"man scanimage\" a \"man sane-hp\".\n"
-"\n"
-"Nepoužívejte pro toto zařízení \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Multifunkční zařízení od HP bylo nastaveno pro možnost skenování. Nyní lze "
-"skenovat příkazem \"ptal-hp %s scan ...\" z příkazového řádku. Skenování z "
-"grafického prostředí nebo z programu GIMP není zatím na tomto zařízení "
-"podporováno. Více informací naleznete v souboru \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\". Pokud máte HP LaserJet 1100 nebo 1200, lze skenovat "
-"pouze v případě, že máte nainstalovánu podporu pro skenování.\n"
-"\n"
-"Nepoužívejte pro toto zařízení \"scannerdrake\"!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Načítám data k tisku ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Přenést konfiguraci tiskárny"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Konfiguraci tiskárny, kterou jste provedli pro frontu %s lze přenést na "
-"frontu %s, tj. na současnou frontu. Všechna nastavená data (jméno tiskárny, "
-"popis, umístění, typ připojení a další výchozí nastavení) budou přepsána, "
-"ale tiskové úlohy nebudou přeneseny.\n"
-"Ne všechny fronty lze přenést z následujích důvodů:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tiskárny na serverech Novell nebo tiskárny, které posílají "
-"data na skupinu příkazů.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podporuje pouze místní tiskárny, vzdálené tiskárny LPD a tisk na "
-"tiskárny přes sockety/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ani LPRng nepodporují IPP tiskárny.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Tiskové fronty, které nebyly vytvořeny tímto programem nebo přes \"foomatic-"
-"configure\" nelze přenést."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Také tiskárny používající PPD soubory od jejich výrobců nebo tiskárny s "
-"nativními ovladači pro CUPS nelze přenést."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Označte tiskárnu, kterou chcete přenést a stiskněte \"Přenést\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Nepřenášet tiskárny"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Přenést"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Tiskárna se jménem \"%s\" již na straně %s existuje.\n"
-"Klikněte na \"Přenést\" pro přepsání.\n"
-"Taky můžete napsat nové jméno nebo ji přeskočit."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Jméno fronty může obsahovat pouze písmena, číslice a podtržítko"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tiskárna se jménem %s již existuje,\n"
-"chcete opravdu přepsat její konfiguraci?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nové jméno tiskárny"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Přenáším %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Byla přenesena výchozí tiskárna (\"%s\"). Má se nastavit jako výchozí také "
-"na vzdáleném tiskovém systému %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Občerstvuji tisková data ...."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Nastavení vzdálené tiskárny"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Spouštím síť ...."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Nastavit síť nyní"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Síť není nastavena"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Nyní začne konfigurace vzdálené tiskárny. To vyžaduje funkční síťové "
-"spojení, ale síť není zatím nastavena. Pokud budete pokračovat bez nastavení "
-"sítě, nebude možné použít tiskárnu, kterou požadujete. Jak chcete pokračovat?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Pokračovat bez nastavení sítě"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nastavení sítě provedené při instalaci nelze nyní aktivovat. Zkontrolujte, "
-"zda je síť dostupná po spuštění systému a nastavení opravte v řídícím centru "
-"Mandrake, v sekci \"Síť a Internet\"/\"Připojení\" a následně nastavte "
-"tiskárnu také v řídícím centru v sekci \"Hardware\"/\"Tiskárna\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Síť nefunguje a nelze ji spustit. Prosím zkontrolujte nastavení hardware. "
-"Pak se opět pokuste provést nastavení vzdálené tiskárny."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Restartuji tiskový systém ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "vysoká"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidní"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaluji tiskový systém v bezpečnostní úrovni %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Pokoušíte se instalovat tiskový systém %s na počítač, bežící v bezpečností "
-"úrovni %s.\n"
-"\n"
-"Tiskový systém pracuje jako démon (proces na pozadí), který čeká na tiskové "
-"úlohy a zpracovává je. Tento démon je také přístupný ze sítě pro jiné "
-"počítače, takže se může stát předmětem síťového útoku. Proto je vybráno "
-"pouze několik služeb, které jsou v této úrovni spuštěny automaticky při "
-"startu.\n"
-"\n"
-"Chcete opravdu nastavit tiskový systém na tomto počítači?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Spustit tiskový systém při startu systému"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Tiskový systém (%s) nebude automaticky spuštěn při startu počítače.\n"
-"\n"
-"Je možné, že volba automatického startu byla vypnuta ve vyšší bezpečnostní "
-"úrovni, protože tiskový systém je potenciální nebezpečí pro síťový útok.\n"
-"\n"
-"Chcete nastavit zpět automatický start tiskového systému?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Ověřují nainstalovaný software..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Odebírám LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Odebírám LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Zvolte tiskový systém pro tiskárnu"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Který tiskový systém chcete použít pro tisk?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Nastavuji tiskárnu \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instaluji Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Možnosti tiskárny"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Připravuji PrinterDrake ...."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Nastavování aplikací..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Chtěli byste nastavit tiskárnu?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Tiskový systém: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Jsou nastaveny následující tiskárny. Dvojitým kliknutím na každou z nich je "
-"možné je modifikovat, nastavit jako výchozí, získat o nich informace nebo je "
-"nastavit na vzdáleném CUPS serveru pro využití v aplikaci Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Jsou nastaveny následující tiskárny. Dvojitým kliknutím na každou z nich je "
-"možné je modifikovat, nastavit jako výchozí nebo o nich získat informace."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Obnovit seznam tiskáren (pro získání všech vzdálených CUPS tiskáren)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Změna tiskového systému"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normání režim"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Chcete nastavit další tiskárnu?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Změnit nastavení tiskárny"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tiskárna %s\n"
-"Co chcete změnit na této tiskárně?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Provést!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Typ připojení pro tiskárnu"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Jméno tiskárny, popis, umístění"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Výrobce tiskárny, model, ovladač"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Výrobce tiskárny, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Nastavit tuto tiskárnu jako výchozí"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Přidat tuto tiskárnu do Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Odebrat tiskárnu ze Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tisk testovací(ch) stránky(nek)"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Nápověda pro tisk na této tiskárně"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Odebrat tiskárnu"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Odebírám starou tiskárnu \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Výchozí tiskárna"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tiskárna \"%s\" je nyní nastavena jako výchozí."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Přidávám tiskárnu do Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Tiskárna \"%s\" byla úspěšně přidána do Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Přidání tiskárny \"%s\" do Star Office/OpenOffice.org se nezdařilo."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Odebírám tiskárnu ze Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"Tiskárna \"%s\" byla úspěšně odebrána z aplikace Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Odebrání tiskárny \"%s\" ze Star Office/OpenOffice.org se nezdařilo."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcete opravdu odebrat tiskárnu \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Odebírám tiskárnu \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Nastavení proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Vítejte v konfiguračním nástroji pro proxy.\n"
-"\n"
-"Zde nastavujete http a ftp proxy zadáním\n"
-"přiděleného přihlašovacího jména a hesla\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Zadejte prosím hodnoty pro http proxy\n"
-"V případě, že nemáte http proxy, ponechejte prázdné"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URL by mělo být 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Číslo portu musí být numerické"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Zadejte prosím hodnoty pro ftp proxy\n"
-"V případě, že nemáte ftp proxy, ponechejte prázdné"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URL by mělo být 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Pokud je potřeba, zadejte prosím přihlašovací jméno\n"
-"a heslo. Pokud je nepotřebujete, nechte prázdné"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "heslo"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "heslo znova"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Hesla nejsou shodná. Zkuste to znovu!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Nemůžu přidat oddíl do _naformátovaného_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Nemůžu zapsat soubor %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid neuspěl"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid neuspěl (možná, že chybí raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Není dostatek oddílů pro RAID úrovně %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustit zvukový systém ALSA (Advanced Linux Sound Architecture)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron - spouští opakující se akce"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd je používán pro sledování stavu baterie a zaznamenávání přes syslog.\n"
-"Může také být použit pro vypnutí počítače při vybité baterii."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Spouští příkazy naplánované příkazem na určitý čas příkazem 'at'.\n"
-"Také spouští příkazy při nízkém vytížení systému."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardní Unixový program který spouští uživatelem zadané programy\n"
-"v předem definovaných intervalech. vixie cron má navíc mnoho vlastností,\n"
-"včetně vyšší bezpečnosti a více možností nastavení."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM přidává do textových programů podporu myši (např pro Midnight "
-"Commander).\n"
-"Může také v konzoli provádět operace 'vyjmi' a 'vlož' a ovládat pop-up menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake testuje hardware a umožňuje nový/změněný\n"
-"hardware nastavit"
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache je WWW server. Je používán k poskytování HTML a CGI souborů."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internetový superserver démon (nazývaný inetd) spouští mnoho ostatních\n"
-"internetových služeb, tak jak jsou zapotřebí. Odpovídá za start např.\n"
-"telnetu, ftp, rsh a rlogin. Pokud vypnete inetd, vypnete tím i ostatní\n"
-"služby které spouští."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spustit paketový filtr pro jádra řady 2.2, který chrání počítač\n"
-"proti útokům ze sítě."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento balíček nahraje zvolenou mapu klávesnice definovanou\n"
-"v /etc/sysconfig/keyboard. Tu lze vybrat pomocí nástroje kbdconfig.\n"
-"Pro většinu počítačů byste ji měli nechat zapnutou."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatická generace hlavičky jádra v adresáři /boot\n"
-"pro soubory /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatická detekce a konfigurace hardware při spuštění."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf provádí různé úkoly při spuštění systému\n"
-"nutné pro správu systémové konfigurace."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tiskový démon, bez kterého nebude fungovat lpr (program pro tisk).\n"
-"Je to server, který posílá tištěné dokumenty jednotlivým tiskárnám."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server používaný pro sestavení vysoce výkonného\n"
-"a dostupného serveru."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je doménový (DNS) server, který překládá hostitelská jména na "
-"IP adresy."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Připojuje a odpojuje všechny síťové (NFS), SMB (Lan/Windows) a Netware "
-"(NCP)\n"
-"přípojné body (mount points)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje či deaktivuje všechny síťová rozhraní, která mají nastartovat při\n"
-"startu systému."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je oblíbený protokol pro sdílení souborů přes sítě TCP/IP.\n"
-"Tato služba poskytuje NFS server, jehož nastavení je v /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je oblíbený protokol pro sdílení souborů přes sítě TCP/IP.\n"
-"Tato služba poskytuje možnost uzamykání souborů na NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automaticky nastaví podporu numerické klávesnice v konzoli\n"
-"a v XFree při startu."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pro OKI 4w a kompatibilní wintiskárny."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Podpora PCMCIA většinou znamená podporu zařízení jako síťové karty a\n"
-"modemy v laptopech. Nespustí se pokud ji přímo nenastavíte, ale není "
-"problém\n"
-"jí mít nainstalovanou i na počítačích, které ji nepotřebují."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper spravuje RPC spojení, která jsou používána protokoly jako NFS\n"
-"a NIS. Portmap server musí být spuštěn na počítačích, které fungují jako\n"
-"servery pro protokoly, které používají mechanismus RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr "Postfix je program pro doručování pošty z jednoho počítače na jiný."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Ukládá a obnovuje 'stav entropie' na počítači, což je používáno pro\n"
-"kvalitnější generaci náhodných čísel."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Přiřazuje přímá zařízení blokovým (například diskové oddíly)\n"
-"pro aplikace jako je Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Démon routed umožňuje automaticky obnovovat směrovací tabulku (router "
-"table)\n"
-"pro IP adresy. K tomu používá protokol RIP. Zatímco RIP je běžně používán\n"
-"v malých sítích, pro složitější sítě je zapotřebí složitější protokoly."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat umožňuje uživatelům sítě sledovat vytížení jednotlivých\n"
-"strojů připojených k síti."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokol rusers umožňuje uživatelům sítě zjistit kdo je přihlášen na\n"
-"jiném počítači."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Protokol rwho umožňuje vzdáleným(remote) uživatelům získat seznam\n"
-"všech uživatelů přihlášených na počítači s démonem rwho (je to podobné\n"
-"službě finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Spustit zvukový systém při startu"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog je program pomocí něhož zaznamenává mnoho démonů správy do "
-"systémových\n"
-"log souborů. Je dobré mít spuštěný syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Nahrát ovladače pro usb zařízení."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Startuje X Font Server (to je nezbytné pro běh XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvolte si, které služby by měli být automaticky spuštěny při startu"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Tisk"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Sdílení souborů"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Systém"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Vzdálená administrace"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Databázové servery"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Skužby: aktivováno %d z %d registrovaných"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Služby"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "spuštěno"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zastaveno"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Služby a démoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nejsou žádné další\n"
-"informace o službě, sorry."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Při spuštění"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Děkujeme vám, že jste si vybrali Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Vítejte do světa Open Source"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Úspěch společnosti MandrakeSoft je založen na principech Svobodného "
-"Software. Tento operační systém je výsledkem spolupráce části celosvětové "
-"Linuxové komunity"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Připojte se ke světu Svobodného Software"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Chcete vědět více o Open Source komunitě? Stát se také členem? Pokud chcete "
-"sdílet své vědomosti, pomáhat vytvářet nástroje, připojte se do diskuzních "
-"klubů, které najdete na našich stránkách \"Community\""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet a zpracování zpráv"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 nabízí ten nejlepší výběr software pro přístup ke všemu, "
-"co nabízí Internet. S pomocí Mozilly a Konquerora můžete prohlížet webové "
-"stránky a animace, ke čtení pošty a zpracování osobních informací lze použít "
-"Evolution a Kmail a využít množství jiných programů"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimédia a grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 dovoluje naplno využít všech multimediálních schopností "
-"počítače! Můžete tak přehrávat různé hudební soubory, editovat či kreslit "
-"obrázky nebo fotografie, sledovat TV a video atd."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Vývoj"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 je vynikající platformou pro vývoj. Můžete využít silný "
-"GNU gcc kompilátor a další prostředky na vývoj Open Source aplikací"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Řídící centrum Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Řídící centrum pro Mandrake Linux 8.2 poskytuje výkonné nástroje na správu a "
-"nastavení vašeho počítače"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Uživatelská rozhraní"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Distribuce Mandrake Linux 8.2 nabízí 11 různých grafických uživatelských "
-"rozhraní, včetně GNOME 1.4, KDE 2.2.2, Window Maker, ..."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Software pro servery"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Váš počítač lze několika kliknutími myši změnit na velmi výkonný server: "
-"webový server, poštovní server, firewall, router, souborový a tiskový server"
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Hry"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 nabízí ty nejlepší Open Source hry - arkády, akční, "
-"karetní, sportovní, strategické, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Chcete se dozvědět o Linuxu jednoduchou, rychlou a snadnou cestou? "
-"Poskytujeme zdarma školení Linuxu, stejně jako testy vašich znalostí "
-"prostřednictvím online školícího centra MandrakeCampus"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalitní podpora jak Linuxové komunity tak z firmy MandrakeSoft je již k "
-"dispozici! Staňte se \"expertem\" a můžete pomáhat jak dalším uživatelům tak "
-"také podporovat naše stránky"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Naši konzultanti jsou připraveni analyzovat požadavky a nabídnout řešení "
-"všech vašich IT projektů. MandrakeSoft je firma, která má velké zkušenosti "
-"jako vydavatel distribucí a nabízí opravdovou alternativu pro IT řešení v "
-"podniku"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Náš elektronický obchod nabízí velké množství Linuxových řešení, speciální "
-"nabídky našeho software a další 'lahůdky'"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Pokud chcete získat více informací o profesionálních službách fy "
-"MandrakeSoft a komerčních nabídkách, podívejte se prosím na níže uvedenou "
-"webovou stránku:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instaluji balíčky..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Nemůžu přečíst vaši tabulku oddílů, možná je příliš narušená :(\n"
-"Pokusím se pokračovat v čištění špatných oddílů"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Chyba!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Nemohu najít potřebný soubor '%s ' s obrazem."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Nastavení automatické instalace"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Zde můžete nastavit disketu pro automatickou instalaci. Tato volba je někdy "
-"nebezpečná a měla by se používat s opatrností.\n"
-"\n"
-"Tato disketa dovoluje zopakovat instalaci, která již na tomto počítači byla "
-"provedena s tím, že v některých krocích lze zadat jiné hodnoty.\n"
-"\n"
-"Pro maximální bezpečnost není rozdělování disků ani formátování prováděno "
-"automaticky, i přesto, pokud to při instalaci zvolíte.\n"
-"\n"
-"Chcete pokračovat?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Nastavení automatických kroků"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vyberte prosím, který z kroků instalace má být proveden automaticky stejně "
-"jako instalační program nebo bude ručně zadán"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Vítejte.\n"
-"\n"
-"Parametry pro automatickou instalaci jsou přístupné v sekci nalevo"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratuluji!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa byla s úspěchem vytvořena.\n"
-"Nyní lze provést znovu instalaci."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automatická instalace"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Přidat položku"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Odstranit poslední položku"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-" Report programu DrackBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" Report démonu pro DrackBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" Detaily o reportu pro DrackBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "celkový průběh"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Zálohovat systémové soubory..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Záložní soubory pevného disku..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Zálohovat soubory uživatelů..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Průběh zálohování na pevný disk... "
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Zálohovat další soubory..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"seznam souborů poslaný na FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problémy FTP spojení: nebylo možné poslat data pro zálohu přes FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Chyba při posílání pošty. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Výběr souboru"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Vyberte soubory nebo adresáře a klikněte na 'Přidat'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Zvolte prosím všechny volby, které potřebujete.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "Tato volba zazálohuje a obnoví všechny soubory v adresáři /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Zálohovat systémové soubory ( adresář /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Použít přírůstkovou zálohu (nepřepisovat starší zálohy)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Nezahrnout kritické soubory (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Tato volba dovolí obnovit různé verze adresáře /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Zvolte prosím všechny uživatele, které chcete zálohovat."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Nezahrnout cache prohlížeče"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Použít přírůstkovou zálohu (nepřepisovat starší zálohy)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Odstranit vybrané"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Uživatelé"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Použít FTP připojení pro zálohu"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Zadejte prosím jméno počítače nebo IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Zadejte adresář, do kterého\n"
-" bude umístěna záloha."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Zadejte své přihlašovací jméno"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Zadejte své heslo"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Pamatovat si heslo"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP připojení"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Bezpečné připojení"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Použít pro zálohování CD/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Vyberte si velikost CD média"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Zvolte pokud používáte CDRW média"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Pokud CDRW médium nejdříve smazat, zatrhněte"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Pokud chcete mít spouštěcí CD,\n"
-" zatrhněte tuto volbu."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Zadejte jméno vaší vypalovačky CD\n"
-" např.: 1,0,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Použít páskovou jednotku"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Zadejte jméno zařízení, na které se bude zálohovat"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Zadejte prosím maximální velikost\n"
-" povolenou pro Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Zadejte adresář, kam bude umístěna záloha:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Použít kvóty pro záložní soubory."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Síť"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Pevný disk / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "každou hodinu"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "každý den"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "každý týden"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "každý měsíc"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Použít démona"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Vyberte si interval mezi\n"
-"jednotlivými zálohami"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Prosím zvolte si\n"
-"médium pro zálohy."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Použít pro pevný disk démona"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Použít pro síť démona"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Ujistěte se, že mezi službami je přítomen cron démon."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Poslat report po záloze mailem na :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Co"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Kde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Kdy"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Další volby"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Nastavení pro DrakBackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Vyberte si, prosím, kam chcete zálohovat."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "na pevný disk"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "přes síť"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Prosím vyberte si, co chcete zálohovat"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Zálohovat systém"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Zálohovat uživatele"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Vybrat uživatele manuálně"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Zdroje pro zálohu:\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systémové soubory:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Soubory uživatelů:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Další soubory:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Uložit na pevný disk do adresáře: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Uložit na FTP na počítač: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t uživatelské jméno: %s\n"
-"\t\t cesta: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Volby:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNezahrnout systémové soubory\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tZálohování používá tar a bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tZálohování používá tar a gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Démon (%s) zahrnuje :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Pevný disk.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Sítí přes FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Sítí přes SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Pro první spuštění použijte Průvodce nebo Rozšířené.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Seznam dat pro obnovení:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Seznam poškozených dat:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Zrušte tuto volbu při dalším spuštění."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Záložní soubory jsou poškozené"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr " Všechna vybraná data byla "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " Úspěšně obnoveno na %s "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr " Obnovit konfiguraci "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Obnovit také ostatní soubory."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Seznam uživatelů pro obnovení (od každého bude obnovena pouze poslední "
-"záloha)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Zálohovat systémové soubory před:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Vyberte datum obnovení zálohy"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Použít pro zálohování pevný disk"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Obnovit z pevného disku."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Zadejte adresář, kde jsou umístěny zálohy"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Vyberte další médium, kde jsou umístěny zálohy"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Další média"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Obnovit systém"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Obnovit uživatele"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Obnovit ostatní"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "vyberte cestu pro obnovu (kromě / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Provést novou zálohu před obnovou (pouze pro přírůstkovou zálohu)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Odebrat adresáře uživatele před obnovou."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Obnovit všechny zálohy"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Vlastní obnova"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Nápověda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Předchozí"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Uložit"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Vytvořit zálohu"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Obnovit"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Další"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Dříve než budete obnovovat, vytvořte zálohu...\n"
-"nebo ověřte, že daná cesta je správná."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-"Chyba při posílání pošty\n"
-" vámi zvolený report nebyl odeslán\n"
-" Proveďte prosím nastavení sendmailu"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Seznam balíčků pro instalaci"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Chyba při posílání souborů přes FTP.\n"
-" Prosím opravte nastavení pro FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Prosím zvolte data pro obnovu..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Prosím zvolte si médium pro zálohy..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Zkontrolujte prosím data pro zálohování..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nebyl nalezen konfigurační soubor, \n"
-"klikněte na Průvodce nebo na Rozšířené."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Vyvíjí se... čekejte prosím."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Zálohovat systémové soubory"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Zálohovat uživatelské soubory"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Zálohovat další soubory"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Celkový průběh"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "soubory poslané přes FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Posílám soubory..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Seznam dat, která budou na CROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Zadejte rychlost vypalovací mechaniky"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Zadejte prosím jméno CD vypalovačky (např.: 1.0.0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Zvolte, pokud chcete mít instalační CD spustitelné."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Zálohovat z konfiguračního souboru"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Prohlédnout konfiguraci zálohy."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Průvodce konfigurací"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Rozšířená konfigurace"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Zálohovat nyní"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"Popis voleb:\n"
-"\n"
-" V tomto kroku Drakbackup může změnit:\n"
-"\n"
-" - Režim komprese:\n"
-" \n"
-" Pokud zvolíte bzip2, budete mít kompresi\n"
-" lepší než pomocí gzip (okolo 2-10%).\n"
-" Tato volba není zvolena jako výchozí, protože\n"
-" vyžaduje daleko více času (až o 1000% více).\n"
-"\n"
-" - Režim zálohování:\n"
-"\n"
-" Tato volba aktualizuje zálohu, ale není moc zajímavá,\n"
-" protože před aktualizací musíte nejdříve zálohu obnovit.\n"
-" \n"
-"- použití souboru .backupignore:\n"
-"\n"
-" Stejně jako pro cvs, i pro Drakbackup lze uvést seznam\n"
-" souborů v .backupignore, které budou při zálohování ignorovány.\n"
-" např.:\n"
-" \\$> cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Některé chyby při nastavení pošty jsou způsobeny\n"
-" špatnou konfigurací programu postfix. Pro vyřešení\n"
-" nastavte myhostname a mydomain v /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"popis voleb:\n"
-"\n"
-"- Záloha systémových souborů:\n"
-" \n"
-"\tTato volba zálohuje adresář /etc, který obsahuje všechny\n"
-"\tkonfigurační soubory. Dávejte pozor při obnově na to,\n"
-"\taby se nepřepsaly soubory:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Zálohovat soubory uživatelů:\n"
-"\n"
-"\tTato volba dovoluje vybrat všechny uživatele, které\n"
-"\t\tchcete zálohovat.\n"
-"\tAby se ušetřilo místo na disku, není dobré zahrnout cache\n"
-"\tod prohlížeče.\n"
-"\n"
-" - Zálohovat ostatní soubory:\n"
-"\n"
-"\tTato volba dovolí přidat další data pro zálohování.\n"
-"\tV současnosti není možné při tomto zálohování zvolit\n"
-"\tpřírůstkové zálohování.\t\n"
-"\n"
-" - Přírůstkové zálohování:\n"
-"\n"
-"\tPřírůstkové zálohování je velmi mocný druh zálohování,\n"
-"\tprotože dovoluje zálohovat všechna data pouze poprvé\n"
-"\ta dále se zálohují pouze změny.\n"
-"\tBěhem obnovy tak budete moci zadat, od jakého data se\n"
-"\tmají data obnovit.\n"
-"\tPokud nezvolíte tuto možnost, bude při každé záloze\n"
-"\tpředchozí záloha smazána.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Popis voleb pro obnovu:\n"
-"\n"
-"Bude použita záloha s nejaktuálnějším datem, protože při\n"
-"přírůstkovém zálohování je nutné provádět obnovu jednu\n"
-"za druhou směrem ke starším datům.\n"
-"\n"
-"Pokud nechcete obnovit uživatele, odznačte všechny\n"
-"jeho zaškrtávací políčka.\n"
-"\n"
-"Jinak je možné si vybrat pouze jednoho z nich\n"
-"\n"
-" - Přírůstkové zálohování:\n"
-"\n"
-"\tPřírůstkové zálohování je velmi mocný druh zálohování,\n"
-"\tprotože dovoluje zálohovat všechna data pouze poprvé\n"
-"\ta dále se zálohují pouze změny.\n"
-"\tBěhem obnovy tak budete moci zadat, od jakého data se\n"
-"\tmají data obnovit.\n"
-"\tPokud nezvolíte tuto možnost, bude při každé záloze\n"
-"\tpředchozí záloha smazána.\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Tento program je svobodný software; můžete ho šířit a/nebo modifikovat\n"
-" podle specifikace GNU General Public Licence, která byla publikáva\n"
-" Free Software Foundation; buď verze 2, nebo (podle volby) pozdější verze.\n"
-"\n"
-" Tento program je distribuován s nadějí, že bude užitečný,\n"
-" ale BEZ JAKÝCHKOLIV ZÁRUK; BEZ NÁROKU NA PROFIT. Více detailů naleznete\n"
-" v licenci GNU General Public Licence.\n"
-"\n"
-" Kopii GNU General public Licence můžete obdržet buď s tímto programem\n"
-" nebo si o ní můžete napsat na adresu Free Software Foundation, Inc.,\n"
-" 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Popis:\n"
-"\n"
-" Drakbackup je nástroj na zálohování systému.\n"
-" Během konfigurace můžete vybrat: \n"
-"\t- Systémové soubory,\n"
-"\t- Soubory uživatelů,\n"
-"\t- Ostatní soubory.\n"
-"\tnebo Celý systém a jiné (jako jsou oddíly s Windows).\n"
-"\n"
-" Drakbackup dovoluje zálohovat na:\n"
-"\t- Pevný disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (se spuštěním, záchranou a autoinstalací).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Páskovou jednotku.\n"
-"\n"
-" Drakbackup dovoluje provést obnovu do vybraného adresáře.\n"
-"\n"
-" Jako výchozí jsou umístěny všechny zálohy do adresáře\n"
-" /var/lib/drakbackup \n"
-"\n"
-" Konfigurační soubor:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"\n"
-"Postup při obnově:\n"
-"\n"
-" Při provádění obnovy odstraní Drakbackup původní adresář\n"
-" a ověří, že zálohované soubory nejsou poškozeny.\n"
-" Doporučuje se ale provést zálohu těchto dat před provedením\n"
-" obnovy.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"popis voleb:\n"
-"\n"
-"Buďte opatrní při zálohování na FTP, protože na server je poslána\n"
-"pouze již vytvořená záloha.\n"
-"Je tudíž vhodné nejdříve provést zálohu na disk před tím, než\n"
-"ji pošlete na server.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problémy při obnově:\n"
-"\n"
-"Při obnovování Drakbackup nejdříve ověřuje všechny\n"
-"zálohované soubory.\n"
-"Před tím, než je soubor obnoven, provede Drakbackup výmaz\n"
-"původního souboru, a tak přijdete o všechna data.\n"
-"Buďte proto opatrní a nesnažte se modifikovat zálohovaná\n"
-"data ručně.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Popis:\n"
-"\n"
-" Drakbackup je nástroj na zálohování systému.\n"
-" Během konfigurace můžete vybrat \n"
-"\t- Systémové soubory,\n"
-"\t- Soubory uživatelů,\n"
-"\t- Ostatní soubory.\n"
-"\tnebo Celý systém a jiné (jako jsou oddíly s Windows).\n"
-"\n"
-" Drakbackup dovoluje zálohovat na:\n"
-"\t- Pevný disk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (se spuštěním, záchranou a autoinstalací).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Páskovou jednotku.\n"
-"\n"
-" Drakbackup dovoluje provést obnovu do vybraného adresáře.\n"
-"\n"
-" Jako výchozí jsou umístěny všechny zálohy do adresáře\n"
-" /var/lib/drakbackup \n"
-"\n"
-" Konfigurační soubor:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
-"\n"
-"\n"
-"Postup při obnově:\n"
-"\n"
-" Při provádění obnovy odstraní Drakbackup původní adresář\n"
-" a ověří, že zálohované soubory nejsou poškozeny.\n"
-" Doporučuje se ale provést zálohu těchto dat před provedením\n"
-" obnovy.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalace %s neuspěla. Stala se tato chyba:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Hledám instalované fonty"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Odznačit instalované fonty"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "zpracovávám všechny fonty"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "nebyly nalezeny žádné fonty"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "hotovo"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "nelze nalézt žádné fonty v připojeném oddíle"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Znovu vybrat správné fonty"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "nelze nalézt žádný font.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Hledat fonty mezi instalovanými"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopie fontu"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Instalace fontů True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "čekejte prosím, právě běží ttmkfdir... "
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Instalace True Type fontů je dokončena"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konverze fontů"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "vytvářím type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Odkazy na Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "konverze ttf fontů"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "konverze pfm fontů"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Ignorovat dočasné soubory"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Restartovat XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Ignorovat soubory s fonty"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "restart xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Před instalací fontů se ujistěte, že máte potřebná práva na instalací a "
-"používání na systému.\n"
-"\n"
-"- Fonty lze instalovat běžným způsobem. Ve výjimečných případech může špatný "
-"font způsobit zamrznutí X serveru."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Zavádění fontů"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Načíst fonty z Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Odinstalovat fonty"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Rozšířené volby"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Seznam fontů"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Zvolte aplikace, které podporují fonty:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Obecné tiskárny"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vyberte soubor s fontem nebo adresář a klikněte na 'Přidat'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instalovat seznam"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "klikněte zde, pokud jste si jisti."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "zde pokud si nejste jisti."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Zrušit celý výběr"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Vybrat vše"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Odebrat seznam"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Úvodní testy"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopírovat fonty do systému"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instalovat & konvertovat fonty"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Poinstalační nastavení"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Odebrat fonty ze systému"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Nastavení po odebrání"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Sdílení Internetového Připojení"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Sdílení Internetového připojení je zapnuto"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Sdílení internetového připojení už bylo nastaveno.\n"
-"Nyní je povoleno.\n"
-"\n"
-"Co chcete dále dělat?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "vypnout"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "odmítnout"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "překonfigurovat"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Zakazuji servery..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Sdílení Internetového připojení je nyní vypnuto."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Sdílení Internetového připojení je vypnuto"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetové sdílení už bylo nastaveno.\n"
-"Nyní je vypnuto.\n"
-"\n"
-"Co chcete dále dělat?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "povolit"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Povoluji servery..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Sdílení Internetového připojení je nyní zapnuto."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Váš počítač bude zkonfigurován pro sdílení připojení na Internet.\n"
-"Tato možnost umožňuje přístup dalších počítačů na lokální síti do Internetu "
-"přes tento počítač.\n"
-"\n"
-"Pozn.: potřebujete vyhrazený síťový adaptér pro nastavení lokální sítě (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rozhraní %s (používá modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Rozhraní %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ve vašem systému není žádný síťový adaptér!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ve vašem počítači nebyl nalezen žádný síťový adaptér. Spusťte prosím program "
-"pro nastavení hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Síťové rozhraní"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Na vašem systému je nastaveno pouze jedno síťové rozhraní:\n"
-"\n"
-"%s\n"
-"\n"
-"Na tomto adaptéru bude nastavena lokální síť."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Prosím zvolte si, ke kterému síťovému adaptéru bude připojena LAN."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Síťové rozhraní je již nastaveno"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varování, síťový adaptér (%s) je již nastaven.\n"
-"\n"
-"Chcete ho automaticky přenastavit?\n"
-"\n"
-"Lze to také provést ručně, ale musíte vědět, co děláte."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatické přenastavení"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Zobrazit aktuální nastavení rozhraní"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktuální konfigurace pro '%s':\n"
-"\n"
-"Síť: %s\n"
-"IP adresa: %s\n"
-"IP atributy: %s\n"
-"Ovladač: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Mohu zachovat současnou konfiguraci a předpokládám, že máte již nastavený "
-"DHCP server; v takovém případě ověřte, že je správně nastavena lokální síť; "
-"nebude v ní provedena žádná změna a nebude ani změněn DHCP server.\n"
-"\n"
-"Jinak mohu změnit jak rozhraní, tak také přenastavit DHCP server podle "
-"potřeby.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokální síť"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "Adresa DHCP serveru"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Přenastavení rozhraní a DHCP serveru"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Číslo lokální síě nekončí na .0, zkouším znovu."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Našel jsem možný konflikt v současném nastavení LAN adresy pro %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Našel jsem existující nastavení firewallu!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varování! Bylo nalezeno existující nastavení firewallu. Po instalaci může "
-"být zapotřebí nějaká ruční úprava."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Nastavuji..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Nastavuji skripty, instaluji software, startuji servery..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problém s instalací balíčku %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Vše se podařilo nastavit.\n"
-"Nyní lze použít tento počítač pro sdílení připojení k Internetu pro vaši "
-"lokální síť, která používá automatickou konfiguraci sítě (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Nastavení již bylo provedeno, ale nyní je vypnuto."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Nastavení již bylo provedeno, nyní je povoleno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Není nastaveno žádné sdílení Internetového připojení."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Nastavení sdílení připojení k Internetu"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Vítá vás průvodce nastavením sdílení připojení k Internetu!\n"
-"\n"
-"%s\n"
-"\n"
-"Klikněte na Konfigurovat, pokud chcete spustit průvodce nastavením."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nastavení sítě (%d adaptéry(ů))"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Smazat profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Smazat profil:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nový profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Zadejte jméno vytvářeného profilu (nový profil je vytvořen jako kopie "
-"vybraného) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Jméno počítače: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Přístup na Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Brána(gateway):"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Rozhraní:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Čekejte prosím"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Nastavuji přístup na Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Nastavení LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ovladač"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Rozhraní"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Nastavuji lokální síť..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klikněte pro spuštění průvodce ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Průvodce..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Použít"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Čekejte prosím... Aktivuji konfiguraci"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Připojen"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nepřipojen"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Připojit..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Odpojit..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "Varování, bylo detekováno jiné připojení k Internetu, zřejmě je to síť"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemáte nakonfigurováno žádné rozhraní.\n"
-"Nastavte jej kliknutím na 'Konfigurovat'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Nastavení LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptér %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protokol o spuštění"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Spustit při startu"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivovat nyní"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivovat nyní"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Toto rozhraní ještě nebylo nastaveno.\n"
-"Spusťte průvodce konfigurací z hlavního okna"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemáte žádné připojení k Internetu.\n"
-"Vytvořte si jej kliknutím na 'Konfigurovat'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfigurace připojení k internetu"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfigurace připojení k internetu"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Typ připojení:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametry"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Brána(gateway)"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernetová karta"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Úroveň zabezpečení"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Řídící centrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Zvolte si nástroj, který chcete použít"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Čína (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japonsko (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japonsko (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Východní Evropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irsko"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Západní Evropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Austrálie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nový Zéland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Jižní Afrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Zadejte prosím\n"
-"typ TV normy a zemi"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Norma TV:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Oblast :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Probíhá vyhledávání TV kanálů ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Vyhledávám TV kanály"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Nebyla nalezena TV karta!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"V počítači nebyla nalezena žádná TV karta. Zkontrolujte prosím, zda "
-"podporovaná karta je správně zapojena.\n"
-"\n"
-"\n"
-"Databázi hardware lze nalézt na:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "použití: keyboarddrake [--expert] [klávesnice]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Jaké je rozložení vaší klávesnice?"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete, aby se klávesa BackSpace chovala v konzoli jako Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vyměnit CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Vložte prosím Instalační CD-ROM do mechaniky a stiskněte Ok.\n"
-"Pokud CD nemáte, stiskněte Zrušit pro přerušení aktualizace systému."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Nelze spustit aktualizaci na běžící systém !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Změny jsou provedeny, ale pro aktivaci je nutné provést logout"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Zobrazit pouze pro vybraný den"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/_Soubor/_Nový"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Soubor/_Otevřít"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Soubor/_Uložit"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>U"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Soubor/Uložit _jako"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Soubor/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Volby"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Volby/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Nápověda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Nápověda/_O aplikaci..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-iso8859-2,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-iso8859-2,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Uživatel"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Zprávy"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Vysvětlivky nástrojů Mandrake Linuxu"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "vyhledat"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Nástroj na monitorování logů"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Nastavení"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "shodných"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "neshodných"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Vyberte soubor"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendář"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Obsah souboru"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Varovné zprávy přes Mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "čekejte prosím, zpracovávám soubor: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Nastavení upozornění přes Mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Vítejte v konfiguraci varovných zpráv přes mail/SMS.\n"
-"\n"
-"Zde lze nastavit posílání varovných zpráv.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "nastavení služeb"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Pokud jedna z vybraných služeb nepoběží, obdržíte varovnou zprávu"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "nahrát volby"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Pokud bude hodnota vetší než zadané číslo, obdržíte varovnou zprávu"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "nastavení varování"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Nastavuje způsob, jakým bude systém posílat varovné hlášky"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Uložit jako..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Jaký je typ vaší myši?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "nebylo nalezeno serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulovat třetí tlačítko?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s nalezeno na %s, chcete ho nastavit?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Zvolte si skener"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Skener %s není podporován"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake nebyl schopen detekovat váš skener %s.\n"
-"Vyberte prosím zařízení, ke kterému je skener připojen"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "vyberte zařízení"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Skener %s musí být nastaven pomocí nástroje printerdrake.\n"
-"Spustit printerdrake lze z řídícího centra Mandrake v sekci Hardware"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Váš skener %s byl nastaven.\n"
-"Nyní lze skenovat dokumenty pomocí aplikace \"XSane\" z nabídky aplikací "
-"Multimédia/Grafika."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfigurace firewallu"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfigurace firewallu"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Firewall je již nastaven.\n"
-"Klikněte na Konfigurovat pro změnu nebo odebrání firewallu"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Klikněte na Konfigurovat pro standardní firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Výběr jazyka"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Volba typu instalace"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detekce hardisků"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Nastavení myši"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Výběr klávesnice"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Bezpečnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Souborové systémy"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formátování oddílů"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Výběr balíčků pro instalaci"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalace systému"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Přidání uživatele"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Nastavení sítí"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Nastavení služeb"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Zaváděcí program"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Startovací disketa"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Nastavení X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Aktualizace systému"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Ukončit instalaci"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Konfigurace tinyfirewallu\n"
-"\n"
-"Zde je možné nastavit jednoduchý firewall pro Mandrake Linux.\n"
-"Pro výkonné řešení firewallu použijte specializovanou\n"
-"distribuci MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nyní budete dotázáni v několika otázkách na služby, které chcete mít\n"
-"přístupné z Internetu. Zamyslete se prosím dobře nad těmito\n"
-"otázkami, protože bezpečnost počítače je důležitá.\n"
-"\n"
-"Pokud nepoužíváte dále vyjmenované služby, zakažte je prosím.\n"
-"Tyto volby lze kdykoliv změnit spuštěním této aplikace!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Potřebujete na tomto počítači web server, který je přístupný\n"
-"z Internetu? Pokud potřebujete webový server přístupný pouze\n"
-"z tohoto stroje, odpovězte na tuto otázku Ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Používáte na tomto serveru jmenný server? Pokud ne a nepotřebujete\n"
-"předávat jiným počítačům informace o IP adresách, odpovězte Ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Chcete povolit příchozí ssh (Secure Shell) spojení? Ssh je náhrada\n"
-"za telnet, která umožňuje vzdálené přihlášení. Pokud nyní\n"
-"používáte telnet, je velmi vhodné přejít na ssh. Telnet není\n"
-"kryptovaný -- kdokoliv může zjistit heslo, pokud ho při telnetu\n"
-"použijete. Na rozdíl od telnetu je ssh kryptované, takže není\n"
-"možné, aby kdokoliv zjistil heslo."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Chcete povolit příchozí spojení přes telnet?\n"
-"Je to VELMI nebezpečné, tak jak už bylo vysvětleno na předchozí\n"
-"obrazovce. Důrazně doporučujeme odpovědět Ne a použít namísto\n"
-"telnetu ssh.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Chcete použít FTP server, který bude přístupný z Internetu? Pokud ano,\n"
-"je doporučeno jej používat pouze pro anonymní přístup. Protože FTP\n"
-"pro přístup nepoužívá žádné kryptování, je možné, že zaslané heslo může\n"
-"získat kdokoliv, i potenciální útočník.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Používáte mailový server? Pokud posíláte poštu přes klienta pine,\n"
-"mutt nebo jiného textového klienta, tak zřejmě ano. V jiných\n"
-"případech to zakažte na firewallu.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Používáte na tomto serveru POP nebo IMAP? Ty se používají\n"
-"pro přístup lidí k emailovým účtům (ne přes web).\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Používáte jádro verze 2.2. Pokud je síťová IP adresa automaticky\n"
-"přidělena počítači doma nebo v práci (dynamické přidělení),\n"
-"potřebujeme tuto možnost povolit. Je to tento případ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Bude váš počítač synchronizován s jiným počítačem?\n"
-"Většinou se to používá v organizacích s větším počtem Unix/Linux\n"
-"počítačů pro synchronizaci logování a podobně. Pokud nejste\n"
-"součástí většího celku nebo jste o ničem podobném neslyšeli,\n"
-"synchronizaci nepotřebujete."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurace je hotova. Je možné zapsat tyto změny na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Nelze otevřít %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Chyba při otevírání %s pro zápis: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Ne, nepotřebuji DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ano, potřebuji DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Ne, nepotřebuji NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ano, potřebuji NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Neukládat"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Uložit & Konec"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Průvodce konfigurací firewallu"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Ne (zakázat na firewalu)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ano (povolit na firewalu)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Čekejte prosím... ověřuji nainstalované balíčky"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Selhala instalace potřebných balíčků : %s a Bastille.\n"
-" Pokuste se je instalovat ručně."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Síťový počítač (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kancelář"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Pracovní stanice s Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Nástroje pro váš Palm Pilot nebo Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Pracovní stanice"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Doménová jména a síťový informační server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programy pro kancelář: textové procesory (kword, abiword), tabulkové "
-"procesory (kspread, gnumeric), prohlížeče pdf a další"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Nástroje pro zvuk: přehrávače mp3 a midi, mixéry a další"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knihy a Howto o Linuxu a Free Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Pracovní stanice s KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm a další"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skupina programů pro mail, newsy, web, přenos souborů a chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Databáze"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Databázové servery PostreSQL nebo MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Nástroje pro snadnou konfiguraci počítače"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - zvuk"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utility"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentace"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolové nástroje"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Poštovní server postfix, server pro news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetová stanice"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimédiální stanice"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Nastavení"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Další grafické desktopy Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, základní grafické prostředí s kolekcí doprovodných "
-"nástrojů"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafické prostředí"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache a Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Nástroje pro vytváření a vypalování CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kancelářská stanice"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm a další"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafické programy jako např. Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Knihovny pro vývoj v C a C++, programy a hlavičkové soubory"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Síťový server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Pošta/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Hry"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Přehrávače a editory videa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - grafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zábavné programy: deskové hry, strategie, atd."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Kolekce nástrojů pro čtení a posílaní mailů (pine, mutt, tin..) a pro "
-"prohlížení Webu"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivace, emulátory, minitoring"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Správa osobních financí"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafické prostředí s uživatelsky přívětivým seskupením aplikací a pracovní "
-"plochou"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienti pro různé verze protokolu ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetová brána"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programy pro přehrávání/editaci zvuku a videa"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Další grafické desktopy"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editory, shelly, souborové nástroje, terminály"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programy na správu financí jako např. gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Správce osobních informací (PIM)"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - vypalování CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Vědecká stanice"
diff --git a/perl-install/share/po/cy.po b/perl-install/share/po/cy.po
deleted file mode 100644
index 97fdf158a..000000000
--- a/perl-install/share/po/cy.po
+++ /dev/null
@@ -1,12371 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Dafydd Tomos <dafydd@imaginet.co.uk>, 1999
-# Rhoslyn Prys <rhoslyn.prys@ntlworld.com>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-11 12:35-0000\n"
-"Last-Translator: Rhoslyn Prys <rhoslyn.prys@ntlworld.com>\n"
-"Language-Team: Cymraeg/Welsh <cy@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-14\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Ffurfweddu pob pen yn annibynnol"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Defnyddiwch estyniad Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Ffurfweddu cerdyn \"%s\" (%s) yn unig"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Ffurfweddiad amlben"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Mae eich system yn cynnal ffurfweddiad amlben.\n"
-"Beth hoffech ei wneud?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Cerdyn graffig"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Dewiswch gerdyn graffig"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Dewiswch wasanaethwr X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Gwasanaethwr X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Dewiswch yrrwr X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Gyrrwr X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Pa ffurfweddiad oXFree hoffech ei gael?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"yn 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s"
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda XFree %s \n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s gyda cyflymu caledwedd 3D ARBROFOL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Mae eich cerdyn yn medru cael cefnogaeth cyflymu caledwedd 3D ond dim ond "
-"gyda XFree %s.\n"
-"SYLWER CEFNOGAETH ARBROFOL YW HWN AC FE ALL RHEWI EICH CYFRIFIADUR.\n"
-"Mae eich cerdyn yn cael ei gynnal gan XFree %s efallai bod gwell cefnogaeth "
-"yn 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (gyrrwr gosod dangoswr)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Ffurfweddiad XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Dewiswch faint y cof eich cerdyn graffeg"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Dewiswch opsiynau ar gyfer y gwasanaethwr"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Dewiswch fonitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Y ddau paramedr pwysig yw'r raddfa adnewyddu fertigol, sef y raddfa mae'r\n"
-"holl sgrin yn cael ei adnewyddu, ac yn fwyaf pwysif y raddfa cydamseru\n"
-"llorweddol, sef y raddfa mae'r llinellau sganio'n cael eu dangos.\n"
-"\n"
-"Mae'r BWYSIG IAWN mad ydych yn enwi monitor gyda graddfa cydamseru\n"
-"sydd tu hwnt i allu eich monitor: mae modd difrodi eich monitor drwy wneud "
-"hynny.\n"
-"Os oes gennych amheuaeth, dewiswch raddfa is."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Graddfa adfywio llorweddol"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Graddfa adfywio fertigol"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor heb ei ffurfweddu"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Cerdyn graffig heb ei ffurfweddu eto"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Cydraniad heb ei ddewis eto"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ydych chi eisiau profi eich ffurfweddiad?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Rhybydd: gall profi'r cerdyn graffig hwn rewi eich cyfrifiadur"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Profi'r ffurfweddiad"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"ceisiwch newid rhai paramedrau"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Digwyddodd gwall:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Gadael mewn %d eiliad"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ydi'r gosodiad hwn yn gywir?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Digwyddodd gwall, ceisiwch newid rhai paramedrau"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Cydraniad"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Dewiswch y cydraniad a'r dyfnder lliw"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Cerdyn graffeg: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Gwasanaethwr XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Rhagor"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Iawn"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modd Arbennigwr"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Dangos y cyfan"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Cydraniadau"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Gosodiad yr yr allweddell: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Math o lygoden: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dyfais llygoden: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizSync Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertRefresh Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Cerdyn graffeg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Dynodiad y cerdyn graffeg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Cof graffeg: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dyfnder lliw: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Cydraniad: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "GwasanaethwrXFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Gyrrwr XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Yn parataoi cyfluniad X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Beth ydych eisiau ei wneud?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Newid Monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Newid cerdyn Graffeg"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Dewisiadau newid Gwasanaethwr"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Newid Cydraniad"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Dangos gwybodaeth"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Profi eto"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Gadael"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Cadw'r newid?\n"
-"Y ffurfweddiad presenol yw:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X wrth ddechrau"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Hoffwn osod eich cyfrifiadur i gychwyn X yn awtomatig ar ôl cychwyn\n"
-"Hoffech chi X i ddechrau wedi i chi ail-gychwyn?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Ail fewn gofnodwch i %s i wireddu'r newidiadau"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Allgofnodwch ac yna defnyddiwch Ctrl Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 lliw (8 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil o liwiau (15 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil o liwiau (16 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miliwn o liwiau (24 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 biliwn o liwiau (32 did)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "16 MB neu fwy"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA safonol, 640x480 ar 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Uwch VGA, 800x600 ar 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Cydnaws a 8514, 1024x768 rhyngleswyd ar 87 Hz (nid 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 rhyngleswyd ar 87Hz, 800x600 ar 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 ar 60 Hz, 640x480 ar 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA di-rygnlesig, 1024x768 ar 60 Hz, 800x600 ar 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA Amledd Uchel, 1024x768 ar 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Aml-amledd sydd yn medru dangos 1280x1024 ar 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Aml-amledd sydd yn medru dangos 1280x1024 ar 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Aml-amledd sydd yn medru dangos 1280x1024 ar 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor sydd yn medru dangos 1600x1200 ar 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor sydd yn medru dangos 1600x1200 ar 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Adran gyntaf o'r rhaniad cychwyn"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Adran gyntaf o'r gyrrwr (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Gosodiad SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Lle ydych chi eisiau gosod y llwythwr cychwyn?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Gosodiad LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO gyda dewislen testun"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "Lilo gyda dewislen graffig"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Cychwyn o DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Prif ddewisiadau Bootloader"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader ar waith"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Gosodiad Bootloader"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dyfais cychwyn"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nid yw'n gweithio gyda hen BIOSau)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Cryno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "cryno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modd fideo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Oedi cyn cychwyn delwedd rhagosodedig"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Cyfrinair"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Cyfrinair (eto)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Cyfyngu dewisiadau llinell orchymyn"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "cyfyngu"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Glanhau /tmp bob tro fyddwch yn cychwyn"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Union faint o RAM os oes angen (canfod %dMB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Galluogi aml-broffil"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Rhowch maint RAM mewn MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Dewis Nid yw 'cyfyngu dewisiadau llinell orchymyn' o werth heb gyfrinair"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Ceisiwch eto"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Nid yw'r cyfrineiriau'n cydfynd"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Neges Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Agor Oedi Cadarnwedd"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Goramser cychwyn y cnewyllyn"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Galluogi cychwyn o CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Galluogi Cychwyn OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Systm Weithredu Rhagosodedig?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Rydych wedi penderfynnu gosod y llwythwr cychwyn ar raniad\n"
-"Mae hyn yn awgrymu bod gennych lwythwr cychwyn ar ddisg caled eisoes: (ee "
-"System Commander).\n"
-"\n"
-"Gyda pha ddisg ydych chi'n cychwyn?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Dyma'r cofnodion gwahanol.\n"
-"Mae modd i chi ychwanegu rhagor neu newid y rhai presennol."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Ychwanegu"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gorffen"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Newid"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Pa fath o gofnod ydych chi eisiau ei ychwanegu?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Systwmau Gweithredu eraill (SunOS..)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Systemau Gweithredu Eraill (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Systemau gweithredu Eraill (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Delwedd"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Gwraidd"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Atodi"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Darllen-ysgrifennu"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabl"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Anniogel"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Rhagosodedig"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Maint intrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Tynnu cofnod"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Nid yw label gwag yn cael ei ganiatau"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Rhaid enwi delwedd cnewyllyn"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Rhaid pennu rhaniad cyfnewid"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Mae'r label hwn yn cael ei ddefnyddio eisoes"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Wedi canfod rhyngwynebau %s %s"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Oes gennych un arall?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Oes gennych rhyngwynebau %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Na"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Iawn"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Gweler gwyboadeth am galedwedd"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Gosod gyrrwr ar gyfer cerdyn %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modiwl %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pa yrrwr %s ddylwn drio?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Mewn rhai achosion, mae gyrrwr %s angen gwybodaeth ychwanegol i weithio'n\n"
-"gywir, er fel rheol mae'n gweithio'n iawn hebddo. Hoffech chi enwi'r "
-"dewisiadau\n"
-"ychwanegol ar ei gyfer neu adael i'r gyrrwr archwilio'r peiriant am y "
-"wybodaeth mae\n"
-"ei angen? Weithiau bydd yr archwilio'n atal y peiriant, ond ni ddylai achosi "
-"unrhyw\n"
-"ddifrod"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Atoholi"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Enwi dewisiadau"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Medrwch ddarparu ddewisiadau i fodiwl %s.\n"
-"Sylwer: wrth greu unrhyw gyfeiriad bydd angen defnyddio rhagddodiad 0x fel "
-"'0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Medrwch nawr ei ddewis i fodiwl. %s.\n"
-"Mae'r dewisiadau yn fformat ``name=value name2=value2 ...''.\n"
-"e.e, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Dewisiadau modiwl:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Methodd llwytho modiwl %s\n"
-"Hoffech chi drio eto gyda pharamedrau eraill?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "mynediad i raglenni X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "mynediad i offer rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "caniatáu \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "mynediad i ffeiliau gweinyddol"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(wedi ychwanegu %s yn barod)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Mae'r cyfrinair yn rhy syml"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Rhowch enw defnyddiwr"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Rhaid i'r enw defnyddiwr gynnwys dim ond llythrennau bach, rhifau, '-' a '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Mae'r enw defnyddiwr wedi ei ychwanegu yn barod"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Ychwanegu defnyddiwr"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Rhowch enw defnyddiwr\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Derbyn defnyddiwr"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Enw cywir"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Enw defnyddiwr"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Cragen"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Eicon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Awtomewngofnodi"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Medraf osod eich cyfrifiadur i fewngofnodi'nawtomatig ar gyfer un "
-"defnyddiwr\n"
-"Hoffech chi wneud hyn?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Dewis y defnyddiwr rhagosodedig:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Dewiswch y rheolwr ffenestr i rhedeg:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Dewiswch iaith i'w defnyddio."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Gallwch ddewis ieithoedd eraill fydd ar gael ar ôl gosod"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Popeth"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Caniatáu pob defnyddiwr"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Arddull"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Dim rhannu"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Rhaid i becyn %s gael ei osod. Ydych chi am ei osod?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Medrwch allforio gan ddefnyddio NFS neu Samba. Pa un hoffech chi"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Mae pecyn gorfodol %s ar goll"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Dileu"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Cychwyn userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Mae rhannu yn ôl defnyddiwr yn defnyddio \"rhannu ffeiliau\" grwp.\n"
-"Mae modd defnyddio userdrake i ychwanegu defnyddiwr i'r grwp."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Croeso i Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Gwael"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Safonol"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Uchel"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Uwch"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoia"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Rhaid defnyddio'r lefel hwn a gofal. Mae'n gwneud eich system yn haws ei\n"
-"ddefnyddio ond mae'n sensitif iawn: rhaid peidio ei ddefnyddio fel peiriant "
-"i'w\n"
-"gysylltu ag eraill nag i'r Rhyngrwyd. Does dim cysylltiad drwy gyfrinair."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Mae'r cyfrinair wedi ei alluogi, ond ni argymellir ei ddefnyddio fel "
-"cyfrifiadur rhwydwaith."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dyma'r safon sy'n cael ei argymell ar gyfer diogelwch cyfrifiadur fydd yn "
-"cael ei gysylltu â'r Rhyngrwyd fel cleient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Mae rhai cyfyngiadau, ac mae rhagor o wiriadau awtomatig yn cael eu rhedeg "
-"bob nos"
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Gyda'r lefel diogelwch hwn, mae defnydd y system fel gwasanaethwr yn "
-"bosibl.\n"
-"Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel gwasanaethwr sy'n "
-"derbyn\n"
-"cysylltiad gan amryw o gleientiaid. Sylwer: os mae cleient yn unig yw eich "
-"peiriant ar y Rhyngrwyd, yna mae'n well i chi ddewis lefel is."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Wedi ei seilio ar y lefel flaenorol, ond mae'r system yn hollol gaeëdig.\n"
-"Mae nodweddion diogelwch ar eu uchaf."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Dewiswch lefel diogelwch"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Lefel diogelwch"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Defnyddiwch libsafe ar gyfer gwasanaethwyr"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Llyfrgell sy'n diogelu rhag gorlif byffer ac ymosodiadau llinellau fformatio."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Croeso i %s y dewiswrsytemau gweithredu! \n"
-"\n"
-"Dewiswch system weithredu o'r rhestr uchod neu\n"
-"arhoswch %d eiliad am gychwyn rhagosodedig\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Croeso i GRUB, y dewiswr systemau gweithredu!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Defnyddiwch allweddi %c a %c i ddewis pa gofnod i'w amlygu."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Gwasgwch Enter i gychwyn y system weithredu, 'g' i olygu'r"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "gorchmynion cyn cychwyn, neu 'o' am y llinell orchymyn."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Bydd y cofnod wedi ei amlygu'n cychwyn yn awtomatig ymhen %d eiliad."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "dim digon o le yn /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Penbwrdd"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Dewislen Cychwyn"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Nid oes modd gosod y llwythwr cychwyn ar adran %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nid yw cymorth wedi ei weithredu eto.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Ffurfweddu'r Math o Gychwyn"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ffeil"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ffeil/_Gadael"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor Categoreiddio Math Newydd"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor Math Newydd"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor traddodiadol"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor Gtk+ Traddodiadol"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Cychwyn Auora wrth gychwyn y cyfrifiadur"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modd Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modd Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Ryych yn defnyddio %s fel Rheolwr Cychwyn.\n"
-"Cliciwch Ffurfweddu i gychwyn dewin gosod"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Ffurfweddu"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modd System"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Cychwyn y system X-Window o'r cychwyn"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Na, tydw i ddim eisiau awto-mewngofnodi"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Iawn, rwyf eisiau awto-mewngofnodi gyda (defnyddiwr, penbwrdd)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Iawn"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "maethu agor/etc/inittab ar gyfer darllen: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d munud"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 munud"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d eiliad"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Nid wyf yn medru creu lluniau o'r sgrin cyn rhannu"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Bydd lluniau o'r sgrin ar gale ar ôl gosod yn %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ffrainc"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Gwlad Belg"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Gweriniaeth Tsiec"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Yr Almaen"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Groeg"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norwy"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sweden"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Yr Iseldiroedd"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Yr Eidal"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Awstria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Yr Unol Daleithiau"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Gwnewch gopi wrth gefn o'ch data yn gyntaf"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Darllenwch yn ofalus!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Os ydych yn bwriadu defnyddio aboot, gofalwch adael lle gwag (2048 sector yn "
-"ddigon)\n"
-"ar ddechrau'r ddisg."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Gwall"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Dewin"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Dewiswch weithred"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Mae gennych un rhaniad FAT mawr\n"
-"(yn cael ei ddefnyddio gan Microsoft Dos/Windows\n"
-"Awgrymaf eich bod yn newid maint y rhaniad\n"
-"(cliciwch arno, ac yna clicio \"Newid maint\"]"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Cliciwch ar raniad"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Manylion"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "jwrnaleiddiwyd FS?"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Gwag"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Arall"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Mathau ffeil-system:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Creu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Math"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Defnyddiwch \"%s\" yn lle hynny"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Dileu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Defnyddiwch \"Dad-osod\" yn gyntaf"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Wedi newid y math o raniad %s bydd yr holl ddata ar y rhaniad yn cael ei "
-"golli"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Dewiswch raniad"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Dewiswch rhaniad arall"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Gadael"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Cyffredinol > Arbennigwr"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Arbennigwr > Cyffredinol"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Dadwneud"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Parhau beth bynnag?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Gorffen heb arbed"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Gorffen heb ysgrifennu y tabl rhaniadau?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ydych eisiau cadw newidiadau /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Awto ddynodi"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Clirio i gyd"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Gwybodaeth am y ddisg caled"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Mae pob rhaniad cynradd wedi ei ddefnyddio"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Alla'i ddim ychwanegu unrhyw raniadau ychwanegol"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "I gael mwy o raniadau, dilëwch un er mwyn gallu creu rhaniad estynedig"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Cadw'r tabl rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Adfer y tabl rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Achub y tabl rhaniadau"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ail-lwytho'r tabl rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Cyfrwng symudadwy'n awto-osod"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Dewiswch ffeil"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Nid oes gan y tabl rhaniad wrth gefn yr un maint\n"
-"Parhau?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Rhybudd"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Rhowch flopi yn y disg-yrrwr\n"
-"Mi fydd yr holl wybodaeth ar y fflopi yma yn gael ei ddileu"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Yn trio achub y tabl rhaniadau"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Gwybodaeth fanwl"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Pwynt gosod"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Dewisiadau"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Newid maint"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Symud"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Fformatio"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Gosod"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Ychwanegu i RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Ychwanegu i LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Dad-osod"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Tynnu o RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Tynnu o LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Newid RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Defnyddiwch ar gyfer cylchol"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Creu rhaniad newydd"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector dechreuol: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Maint mewn MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Math o ffeilsystem: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Pwynt gosod:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Dewis"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Tynnu'r ffeil cylch-ol?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Newid math y rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Pa fath o system ffeil ydych chi eisiau?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Newid o ext2 i ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Lle'r hoffech chi odod y ffeil cylch-ol %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Lle ydych am osod dyfais %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Methu dad setio'r pwynt gosod gan fod y rhaniad yn cael ei ddefnyddio ar "
-"gyfer cylch-ol\n"
-"Tynnu'r cylch-ol yn gyntaf"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Cyfrifo ffiniau system ffeiliau FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Newid maint"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Nid oes modd newid maint y rhaniad"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Dylai'r holl ddata ar y rhaniad gael ei ategu"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ar ôl newid maint rhaniad %s, bydd yr holl ddata ar y rhaniad yma yn cael ei "
-"golli"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Dewiswch y maint newydd"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Maint mewn MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Pa ddisg hoffech chi symud iddo?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Pa sector hoffech chi symud iddo?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Symud"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Yn symud rhaniad.."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Dewis RAID presennol i ychwanegu iddo"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "newydd"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Dewis LVM presennol i ychwanegu iddo"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Enw LVM"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Niid oes modd defnyddio'r rhaniad ar gyfer cylch-ol"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Cylch-ol"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Enw ffeil cylch-ol"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Rhowch enw ffeil"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Mae'r ffeil yn cael ei ddweis eisoes gam gylch-ol arall, dewiswch un arall"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Mae'r ffeil yn bodoli eisoes. Defnyddiwch hwn?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Dewisiadau gosod"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Amrywiol"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dyfais"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "lefel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "maint darn"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Byddwch ofalus: mae'r weithred hon yn beryglus"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Pa fath o rhaniad %s"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Mae'n flin gen i ond ni alla'i dderbyn creu /boot mor bell o ddechrau'r disg "
-"(ar silindr > 1024).\n"
-"Naill ai nad ydych yn defnyddio LILO a ddim angen /boot neu byddwch yn "
-"defnyddio LILO a ni fydd yn gweithio."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Mae'r rhaniad rydych wedi dewis ychwanegu fel y gwraidd (/) wedi'i leoli yn "
-"bellach na 1024ed silindr eich disg a nid oes gennych rhaniad /boot.\n"
-"Os ydych yn bwriadu defnyddio y rheolwr bwtio LILO, nodwch fe ddylech greu "
-"rhaniad /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Rydych wedi dewis meddalwedd rhannu RAID fel gwraidd (/)\n"
-"Nid oes llwythwr cychwyn yn medru trin hwn heb rhaniad /boot\n"
-"Cofiwch ychwanegu rhaniad /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Mae tabl rhaniad disg-yrrwr %s am gael ei ysgrifennu i'r disg!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Mi fydd angen i chi ail-fwtio cyn i'r newidiadau gymeryd lle"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Wedi fformatio rhaniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Fformatio"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Yn fformatio ffeil cylch-ol %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Yn fformatio rhaniad %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Cuddio ffeiliau"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Mae cyfarwyddiadur %s eisoes yn cynnwys peth data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copďo %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Tynnu %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Mae rhaniad %s yn cael ei alw'n %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dyfais: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Llythyren disg-yrrwr yn DOS: %s (dim ond dyfalu)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Math: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Enw :"
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Dechrau: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Maint: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sector"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d i silindr %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Wedi fformatio\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Heb ei fformatio\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Gosodwyd\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Ffeil(iau) Cylch-ol:\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Y rhaniad i'w bwtio fel rheol\n"
-" (ar gyfer bwt MS-DOS, nid ar gyfer lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Lefel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Maint darn %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Disg RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Enw ffeil cylch-ol: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mwy na thebyd rhaniad Gyrrwr\n"
-"yw'r rhaniad hwn. Gwell gadael\n"
-"llonnydd iddo.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Mae'r rhaniad Bootstrap\n"
-"hwn ar gyfer cychwyniad\n"
-"dwbl eich system\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Maint: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometreg: %s silindr, %s pen, %s sector\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Gwybodaeth:"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Diag LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Math tabl rhaniad: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ar fws %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Dewisiadau: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Allwedd amgryptio system ffeil : "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Dewiswch eich allwedd amgryptio system ffeiliau"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Mae'r allwedd amgryptio'n rhy syml ( mae'n rhaid bod o leiaf %d nod o hyd)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Nid yw'r allweddi amgryptio'n cydfynd"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Allwedd amgryptio"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Allwedd amgryptio (eto)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Newid y math"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Cliciwch ar gyfrwng"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Chwiliwch am wasanaethwyr"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "mi fethodd y %s fformatio o %s"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nid wyf yn gwybod sut i fformatio %s ym math %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "methodd gosod rhaniad %s yng gnhyfeiriadur %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "methodd fdisk gyda cod gadael %d neu arwydd %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gwall dadosod %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "syml"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "gyda /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Gwasanaethwr"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Does dim modd defnyddio JFS ar rhaniadau llai na 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Does dim modd defnyddio ReiserFS ar gyfer rhaniadau llai na 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Rjhaid i bwyntiau gosod gynnwys / arweiniol"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Mae yna eisoes raniad gyda pwynt gosod %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Does dim modd defnyddio Cyfrol Rhesymegol LVM ar gyfer pwynt gosod %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dyai'r cyfeiriadur aros o fewn y system ffeilio gwraidd"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Mae angen gwir system ffeilio (ext2, reiserfs) ar gyfer y pwynt gosod\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Does dim modd defnyddio Cyfrol Rhesymegol LVM ar gyfer pwynt gosod %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nid oes digon o le ar gyfer awtoddynodi"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Dim i'w wneud"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Gwall wrth agos %s ar gyfer ysgrifennu %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Digwyddodd gwall - ni chanfyddwyd dyfeisiadau dilys i greu systemau ffeil "
-"arnynt. Gwiriwch eich caledwedd am ffynhonell yr anhawster."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Does gennych chi ddim rhaniadau!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"Mae GNU/Linux yn system aml-ddefnyddiwr, ac mae hyn yn golygu bod pob\n"
-"defyddiwr yn medru cael ei ddewisiadau ei hun, ei ffeiliau ei hun ac yn y "
-"blaen.\n"
-"Gallwch ddarllen yr \"User Guide\" i ddysgu mwy. Ond yn anhebyg i \"gwraidd"
-"\", sef\n"
-"y gweinyddwr, ni fydd modd i'r defnyddiwr fyddwch yn eu creu yma'n medru\n"
-"newid dim ond eu ffeiliau a'u ffurfweddiad ei hun. Bydd rhaid i chi greu un\n"
-"defnyddiwr cyffredin ar gyfer chi eich hun. Dyma'r cyfrif ddylech "
-"mewngofnodi\n"
-"iddo ar gyfer defnydd bob dydd. Er ei fod yn ymarferol iawn i fewngofnodi "
-"fel\n"
-"\"root\" gall fod yn beryglus iawn!. Gall y camgymeriad lleiaf olygu nad yw "
-"eic\n"
-"system yn gweithio ragor. Os wnewch chi gamgymeriad mawr fel defnyddiwr\n"
-"cyffredin, byddwch ond yn colli rhywfaint o wybodaeth, ac nid y system "
-"gyfan.\n"
-"Yn gyntaf rhowch eich enw go iawn. Dose dim rhaid, wrth gwrs - mae modd\n"
-"i chi rhoi beth bynnag hoffech chi. Bydd DraX yn cymryd yr enw cyntafa'i roi "
-"yn\n"
-"yr \"Enw defnyddiwr\" Dyma'r enw bydd y defnyddwr hwn yn ei ddefnyddio i\n"
-"fewngofnodi i'r system. Mae modd ei newid. Yna rhowch gyfrinair. Nid yw\n"
-"cyfrianair defnyddiwr cyffredin mor bwysig ag un \"gwraidd\" o safbwynt "
-"diogelwch\n"
-"ond nid yw hynny'n rheswm i'w esgeuluso - wedi'r cyfan mae eich ffeiliau "
-"mewn\n"
-"perygl\n"
-"\n"
-"Os wnewch chi glicio \"Derbyn Defnyddiwr\", bydd modd ychwanegu fanint\n"
-"fynnoch. Ychwanegwch ddefnyddiwr ar gyfer pob un o'ch ffrindiau: eich tad\n"
-"neu eich chwaer, e.e. Ao ôl ychwanegu'r holl ddefnyddwyr, cliciwch \"Gorffen"
-"\".\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn caniatáu i chi newid y \"gragen\" "
-"rhagosodedig\n"
-"ar gyfer y defnyddiwr hwnnw (bash yw'r rhagosodedig)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Dyma'r rhaniadau Linux sydd wedi canfod ar eich disg caled\n"
-"Gallwch gadw'r dewisiadau sydd wedi eu gwneud gan y dewin, mae'n nhw'n iawn\n"
-"ar gyfer y rhanfwyaf o osodiadau. Os ydych am wneud newidiadau, rhaid i chi "
-"ol eiaf\n"
-"ddiffinio rhaniad gwraidd (\"/\"). Peidiwch dewis rhaniad sy'n rhy fach neu "
-"fyddwch\n"
-"yn methu llwytho digon o feddalwedd. Os hoffech gadw eich data ar raniad "
-"arall,\n"
-"bydd angen i chi greu rhaniad ar gyfer \"/home\"( ond dim ond os oes mwy nag "
-"un\n"
-"rhaniad Linux ar gael)\n"
-"Mae pob rhaniad yn cael ei restri fel hyn: \"Enw\", \"Maint\".\n"
-"\n"
-"Mae \"Enw\" yn cael ei drefnu: \"math o ddisg caled\", rhif y disg caled\",\n"
-"\"rhif rhaniad\" (e.e, \"hda1\").\n"
-"\n"
-"\"Math o ddisg caled\" yw \"hdos mai disg caled IDE sydd gennych a\n"
-"\"sd\" os mai SCSI yw'r disg caled.\n"
-"\n"
-"Mae \"Rhif Disg Caled\" yn lythyren ar ôl \"hd\" neu \"sd\". Ar gyfer\n"
-"disg caled IDE mae:\n"
-"\n"
-" * \"a\" yn golygu \"prif ddisg caled ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"b\" yn golygu \"disg caled gwas ar y rheolwr IDE cyntaf\",\n"
-"\n"
-" * \"c\" yn golygu \"prif ddisg caled ar yr ail reolwr IDE\",\n"
-"\n"
-" * \"d\" yn golygu \"disg caled gwas ar yr ail reolwr IDE\".\n"
-"\n"
-"Gyda disgiau caled SCSI, mae \"a\" yn golygu \"ID SCSI isaf \", a \"b\" yn "
-"golygu\n"
-"\"ID SCSI ail isaf\", ag ati."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mae gosodiad Mandrake Linux ar gael ar draws nifer o CD-ROM. Mae DrakX\n"
-"yn gwybod os yw pecyn penodol wedi ei leoli ar CD-ROM arall a bydd yn bwrw\n"
-"allan yr CD cyfredol a gofyn am y llall.."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Mae'n amser penderfynu pa raglenni rydych am eu gosod ar eich\n"
-"system. Mae yna filoedd o becynnau ar gael ar gyfer Mandrake Linux, ond\n"
-"does dim disgwyl i chi wybod amdanyn nhw i gyd.\n"
-"\n"
-"Os ydych chi'n gwneud gosodiad safonol o'r CD-ROM, bydd gofyn i chi\n"
-"ddweud pa CDau sydd gennych. Gwiriwch labeli'r CDau ac amlygu'r blychau\n"
-"sy'n cyfateb i'r CDau sydd gennych ar gyfer y gosodiad. Cliciwch \"Iawn\"\n"
-"pan ydych yn barod i barhau.\n"
-"\n"
-"Mae'r pecynnau wedi eu didoli yn grwpiau sy'n cyfateb i ddefnydd penodol\n"
-"ar eich peiriant. Mae'r grwpiau wedi eu rhannu yn bedair adran:\n"
-"\n"
-" * \"Man Gwaith\": os ydych yn bwriadu defnyddio eich peiriant fel man\n"
-"gwaith yna dewiswch un o'r grwpiau cyfatebol.\n"
-"\n"
-" * \"Datblygiadol\": os yw'r peiriant yn cael ei ddefnyddio i raglenni, "
-"dewiswch\n"
-" y grwpiau perthnasol\n"
-"\n"
-" * \"Gwasanaethwr\": os ydych am i'r peiriant gael ei ddefnyddio fel\n"
-"gwasanaethwr bydd modd i chi ddewis y gwasanaethau cyffredin rydych am\n"
-"eu cael ar eich peiriant.\n"
-"\n"
-" * \"Amgylchedd Graffigol\": dyma'r lle i ddewis eich amgylchedd graffigol.\n"
-"Rhaid dewis o leiaf un er mwyn cael man gwaith graffigol!\n"
-"\n"
-"Bydd symud cyrchwr y llygoden dros enw grwp yn amlygu esboniad byr am y\n"
-"grwp hwnnw. Os ydych wedi dad-ddewis pob grwp wrth wneud gosodiad\n"
-"arferol ac nid uwchraddiad), bydd dialog yn ymddangos a chynnig\n"
-"dewisiadau amrywiol ar gyfer y gosodiad lleiaf\n"
-"\n"
-" * \"Gyda X\" Gosod y nifer lleiaf o becynnau i gael penbwrdd graffigol\n"
-"i weithio.\n"
-"\n"
-" * \"Gyda dogfennaeth elfennol\" Gosod y system sylfaenol yn ogystal\n"
-"a gwasanaethau elfennol a'u dogfennau. Mae'r gosodiad hwn yn addas\n"
-"ar gyfer gosod gwasanaethwr.\n"
-"\n"
-" * \"Gosodiad bychan iawn\" Gosod y lleiafswm posibl i greu system Linux\n"
-"llinell orchymyn weithredol. Tua 65MB o faint.\n"
-"\n"
-"Mae clicio blwch \"Dewis pecynnau unigol\". yn ddefnyddiol os ydych\n"
-"yn gyfarwydd gyda'r pecynnau sy'n cael eu cynnig neu os ydych eisiau\n"
-"rheolaeth lwyr dros yr hyn sy'n cael ei osod\n"
-"\n"
-"Os ydych wedi cychwyn y gosodiad ym modd \"Diweddaru\", bydd modd i\n"
-" chi ddad-ddewis pob grwp er mwyn osgoi gosod unrhyw becyn newydd.\n"
-"Mae hyn yn ddefnyddiol ar gyfer trwsio neu ddiweddaru system sy'n bod "
-"eisoes.\n"
-" "
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Yn olaf, yn dibynnu ar eich dewis o becynnau unigol, bydd coeden yn cynnwys\n"
-"yr holl becynnau wedi eu dosbarthu yn ôl grwp ac is grwp. Wrth bori'r "
-"goeden,\n"
-"gallwch ddewis grwp cyfan, isgrwp neu becyn unigol.\n"
-"\n"
-"Pryd bynnag fyddwch wedi dewis pecyn ar y goeden, bydd disgrifiad yn\n"
-"ymddangos ar y dde. Pan fyddwch wedi gorffen dewis , cliciwch y botwm\n"
-" \"Gosod\" fydd yn cychwyn y drefn osod. Gan ddibynnu ar gyflymder eich\n"
-"caledwedd a'r nifer o becynnau i'w gosod, gall gymryd peth amser i'w "
-"gwblhau.\n"
-"Bydd amser tan orffen yn cael ei ddangos ar y sgrin er mwyn i chi weld a "
-"oes\n"
-"amser i wneud paned!\n"
-"\n"
-"!! Os oes pecyn gwasanaethwr wedi ei ddewis yn fwriadol neu am ei fod yn "
-"rhan\n"
-"o grwp cyfan, bydd angen i chi gadarnhau eich bod eisiau i'r gwasanaethwyr\n"
-"gael eu gosod. Ym Mandrake Linux mae unrhyw wasanaethwr sydd wedi ei\n"
-"osod yn cael ei gychwyn fel rhagosodiad wrth gychwyn. Hyd yn oed os ydynt\n"
-"yn ddiogel a doedd dim materion pryder pan gafodd y dosbarthiad ei ryddhau,\n"
-"mae'n bosibl i fylchau diogelwch gael eu darganfod wedi i'r fersiwn hwn o\n"
-"Mandrake Linux gael ei gwblhau. Os nad ydych yn gwybod beth mae\n"
-"gwasanaeth arbennig i fod i'w wneud na pham mae wedi ei osod, yna cliciwch\n"
-"\"Na\". Bydd clicio \"Iawn\" yn gosod y gwasanaethau hynny a byddant yn\n"
-"cael eu cychwyn yn ddiofyn drwy ragosodiad!!\n"
-"\n"
-"Mae'r dewis \"Dibyniad Awtomatig\"yn analluogi'r deialog rhybudd sy'n\n"
-"ymddangos bob tro fydd y gosodwr yn dewis pecyn yn awtomatig.\n"
-"Mae hyn yn digwydd am ei fod wedi penderfynu ei fod angen bodloni\n"
-"dibyniad gyda phecyn arall er mwyn cwblhau'r gosodiad yn llwyddiannus\n"
-"\n"
-"Mae'r eicon disg medal bychan ar waelod y rhestr yn caniatáu llwytho'r\n"
-"rhestr pecynnau dewiswyd yn ystod gosodiad blaenorol. Bydd clicio\n"
-"ar yr eicon hwn yn gofyn i chi osod yn y peiriant disg meddal grëwyd ar\n"
-"ddiwedd gosodiad arall. Gwelwch yr ail neges o'r cam diwethaf ar sut i\n"
-"greu disg meddal o'r fath."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Dyma eich cyfle i gysylltu gyda'r rhyngrwyd/rhwydwaith.Os hoffech chi\n"
-"gysylltu eich cyfrifiadur i'r Rhyngrwyd neu i rwydwaith lleol, cliciwch\n"
-"\"Iawn\" . Bydd awtoganfod dyfeisiadan rhwwydwaith a modem yn\n"
-"cychwyn. Os yw'r canfod yn methu, dad-diciwch y blwch \"Defnyddiwch\n"
-"awto ganfod\" y tro nesaf. Mae gennych y dewis i beidio ffurfweddi eich\n"
-"rhwydwaith, neu i'w wneud rhywbryd eto. Os fell, cliciwch y botwm \"Diddymu"
-"\".\n"
-"\n"
-"Cysylltiadau posib: modem traddodiadol,modem IDSN, cyswllt ADSL,\n"
-"modem cable ac yn olaf cyswllt LAN syml (Ethernet).\n"
-"\n"
-"Byddwn ni ddim yn mynd i fanylion y ffurfweddiad yma. Gwnewch yn siwr\n"
-"fod gennych yr holl fanylion gan eich darparwr gwasanaeth rhyngrwyd (ISP)\n"
-"neu weinyddwr system\n"
-"\n"
-"Mae modd i chi edrych ar bennawd yn y llawlyfr ar gyswllt a'r Rhyngrwyd am\n"
-"fanylion ffurfweddiad, neu aros nes i'ch system gael ei osod a defnyddio'r\n"
-"rhaglen sydd yno i ffurfweddu eich cyswllt.\n"
-"\n"
-"Os ydych am ffurfweddu eich rhwydwaith yn hwyrach ar ôl y gosodiad neu\n"
-"os ydych wedi gorffen ffurfweddi eich cyswllt a'r rhwydwaith, yna cliciwch\n"
-"\" Diddymu.\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Mae modd i chi ddewis pa wasanaethau rydych am eu cychwyn\n"
-"wrth gychwyn eich cyfrifiadur.\n"
-"\n"
-"Dyma'r holl wasanaethau sydd ar gael gyda'r gosodiad cyfredol. Darllenwch\n"
-"y rhestr yn ofalus a dad-diciwch y rhai nad oes eu hangen bob tro wrth "
-"gychwyn.\n"
-"\n"
-"Mae modd cael esboniad byr am wasanaeth wrth eu dewis. Ond, os nad ydych\n"
-"yn siwr a yw'r gwasanaeth o werth neu beidio, mae'n well cadw at y drefn\n"
-"rhagosodedig\n"
-"\n"
-"!!Mae angen i chi fod yn ofalus iawn os ydych am ddefnyddio eich peiriant\n"
-"fel gwasanaethwr: mwy na thebyg na fyddwch eisiau cychwyn unrhyw\n"
-"wasanaethau nad oes eu hangen. Cofiwch bod cael nifer o wasanaethau\n"
-"wedi eu galluogi ar y gwasanaethwr, fod yn beryglus. Yn gyffredinol,\n"
-"mae'n well dewis dim ond y gwasanaethau mae'n rhaid eu cael.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr "Mae gGNU/Linux yn rheoli amser drwy GMT (Greenwich Mean Time)"
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (am X Window System) yw calon rhag wyneb graffigol GNU/Linux\n"
-"y mae pob amgylchedd graffig megis KDE, Gnome, AfterStep\n"
-"WindowMaker ag ati, sydd o fewn Mandrake Linux, yn dibynnu. Yn yr\n"
-"adran hon bydd DrakX yn ceisio ffurfweddu X yn awtomatig.\n"
-"\n"
-"Mae'n anarferol iddo fethu oni bai bod y caledwedd yn hen iawn (neu yn\n"
-"newydd iawn). Os yw'n llwyddo, bydd yn cychwyn X ar y X cydraniad\n"
-"gorau posibl yn ddibynnol ar faint y monitor. Bydd ffenestr yn ymddangos\n"
-"gan ofyn os ydych yn ei weld.\n"
-"\n"
-"Os ydych yn gwneud gosodiad \"Arbenigwr\", byddwch yn defnyddio'r \n"
-"dewin ffurfweddu X. Gwelwch yr adran gyfatebol o'r llawlyfr am ragor o\n"
-"wybodaeth am y dewin.\n"
-"\n"
-"Os ydych yn medru gweld y neges ac ateb \"Iawn\", yna bydd DrakX yn\n"
-"mynd ymlaen i'r cam nesaf. Os nad ydych yn gweld y neges mae'n golygu\n"
-"bod y ffurfweddiad yn anghywir a daw i ben ymhen 10 eiliad, gan adfer y "
-"sgrin."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Efallai na fyddwch yn fodlon iawn gyda dagosiad ffurfweddiad X y tro\n"
-"cyntaf fyddwch yn ei ddefnyddio (sgrin yn rhy fach, i un ochr, ag ati)\n"
-"Felly mae DrakX yn gofyn i chi os yw'r ffurfweddiad yn iawn. Bydd\n"
-"hefyd yn cynnig ei newid drwy gynnig restr o foddau dilys daeth o hyd\n"
-"iddynt, i chi gael dewis un.\n"
-" \n"
-"Os nad ydych yn medru cael X i weithio, dewiswch \" Newid cerdyn graffig"
-"\",\n"
-"dewiswch \"Cerdyn heb ei restri\", ac yna wrth ddewis gwasanaethwr, dewis\n"
-"\"FBDev\". Mae hwn yn ddewis diogelwch sy'n gweithio gydag unrhyw gerdyn\n"
-"graffig modern. Dewiswch \" Profwch eto\" i fod yn siwr."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Yn y diwedd bydd gofyn i chi ddewis os ydych am weld rhyngwyneb graffig\n"
-"wrth gychwyn y cyfrifiadur. Sylwch y bydd y cwestiwn hwn yn cael ei ofyn\n"
-"hyd yn oed os nad ydych yn dewis profi'r ffurfweddiad. Yn amlwg, byddwch\n"
-"am ateb \"Na\" os yw eich peiriant i weithredu fel gwasanaethwr, neu os\n"
-"nad oeddech yn llwyddiannus yn cael eich dangosydd i ffurfweddu'n gywir.."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mae gan yr CD-ROM Mandrake Linux modd achub. Gallwch ei gyrraedd drwy\n"
-"gychwyn y peiriant o'r CD-ROM, gwasgu'r fysell >>F1<< o'r cychwyn a theipio\n"
-" >>rescue<<wrth yr anogwr. Ond os nad yw eich cyfrifiadur yn medru cychwyn\n"
-"drwy'r CD-ROM dylech ddod yn ôl i'r cam hwn am gymorth mewn o leiaf dwy "
-"sefyllfa:\n"
-"\n"
-" *wrth lwytho'r llwythwr cychwyn, bydd DrakX yn ailysgrifennu'r adran bwtio "
-"[MBR]\n"
-"ar eich prif ddisg [oni bai eich bod yn defnyddio rheolwr cychwyn arall] fel "
-"eich bod\n"
-"yn medru cychwyn yn Windows neu GNU/Linux [gan gymryd bod gennych Windows\n"
-"ar eich system]. Os fyddwch angen ailosod Windows, bydd proses osod "
-"Microsoft yn\n"
-"ail ysgrifennu'r adran bwtio, ac felly ni fydd modd i chi gychwyn GNU/"
-"Linux!\n"
-"\n"
-" * os oes anhawster yn codi ac nid ydych yn medru cychwyn GNU/Linux o'r "
-"ddisg\n"
-"caled, y ddisg feddal fydd yr unig ffordd i gychwyn GNU/Linux.Mae'n cynnwys\n"
-"nifer dda o offer i adfer y system, gwall teipio anffodus, camdeipio "
-"cyfrinair neu\n"
-"rhesymau eraill\n"
-"\n"
-"Pan fyddwch yn clicio ar y cam hwn, bydd gofyn i chi rhoi disg meddal yn y "
-"gyrrwr.\n"
-"Rhaid i'r ddisg fod yn wag neu fod dim gwahaniaeth colli'r data arno.Does "
-"dim\n"
-"angen ei fformatio gan y bydd DrakX yn ailysgrifennu'r holl ddisg."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Yn awr mae angen i chi ddewis lle ar eich disg caled i osod eich\n"
-"system weithredu Linux Mandrake. Os yw eich disg caled yn wag neu\n"
-"os oes yna system weithredol eisoes yn cymryd yr holl le sydd ar gael,\n"
-"bydd angen i chi greu rhaniadau arno.Yn y bon, mae rhannu disg caled\n"
-"yn golygu ei rhannu'n rhesymegol i greu lle i osod eich system Mandrake\n"
-"Linux newydd.\n"
-"\n"
-"Gan bo effaith y broses rannu'n ddidroi nôl gall creu rhaniadau fod yn "
-"broses\n"
-"bygythiol a straenus os ydych yn ddefnyddiwr dibrofiad. Yn ffodus, mae na\n"
-"ddewin sy'n symleiddio'r broses. Cyn cychwyn, darllenwch y llawlyfr a\n"
-"cymerwch bwyll.\n"
-"\n"
-"Os ydych yn rhedeg y gosodiad ym modd Arbenigwr, byddwch yn agor\n"
-"DiskDrake, rhaglen rhannu Mandrake Linux, sy'n caniatáu i chi wneud mân\n"
-"newidiadau i'ch rhaniadau. Gw. pennawd DiskDrake yn y llawlyfr. O'r\n"
-"rhyngwyneb gosod, gallwch ddefnyddio'r dewiniaid drwy glicio ar fotwm\n"
-"\"Dewin\" yn y ddeialog.\n"
-"\n"
-"Os oes yna raniadau wedi eu diffinio, un ai o osodiad blaenorol neu\n"
-"gan offeryn rhannu arall, dewiswch y rheini i osod eich system Linux.\n"
-"\n"
-"Os nad oes rhaniadau wedi eu diffinio, bydd angen i chi eu creu gan\n"
-"ddefnyddio'r dewin. Gan ddibynnu ar ffurfweddiad eich disg caled, mae\n"
-"nifer o ddewisiadau ar gael:\n"
-"\n"
-" * \"Defnyddiwch lle gwag\": mae'r dewis hwn yn arwain at greu rhaniadau\n"
-"awtomatig o'ch disg(iau) caled. Bydd dim cwestiynau eraill.\n"
-"\n"
-" * \"Defnyddiwch y rhaniad cyfredol\": mae'r dewin wedi canfod un neu fwy\n"
-"o raniadau Linux cyfredol ar eich disg caled. Os ydych am eu defnyddio,\n"
-"cliciwch y dewis hwn.\n"
-"\n"
-" * \"Defnyddiwch le gwag ar raniad Windows\": os yw Microsoft Windows ar\n"
-"eich disg caled ac yn cymryd y lle i gyd, bydd rhaid i chi greu lle ar gyfer "
-"data\n"
-"Linux. I wneud hynny gallwch ddileu eich rhaniad a data Microsoft Windows\n"
-"(gw. atebion\"Dileu'r ddisg gyfan\" neu \"Modd Arbenigwr) neu ail-lunio "
-"maint\n"
-"rhaniad Microsoft Windows. Mae modd ail lunio maint y rhaniad heb golli "
-"data.\n"
-"Argymhellir gwneud hyn os ydych am ddefnyddio Mandrake Linux a Microsoft\n"
-"Windows ar yr un cyfrifiadur.\n"
-"\n"
-" Cyn gwneud y dewis hwn, cofiwch y bydd maint eich rhaniad Microsoft "
-"Windows\n"
-"yn llai nag yw ar hyn o bryd. Bydd gennych llai o le yn Microsoft Windows i "
-"gadw\n"
-"data neu i osod meddalwedd newydd.\n"
-"\n"
-" * \"Dileu'r holl ddisg\" os ydych am ddileu'r holl ddata a rhaniadau "
-"presennol\n"
-"ar eich disg caled a'u cyfnewid am system Mandrake Linux, yna dewiswch hwn.\n"
-"Byddwch yn ofalus wrth wneud hyn gan na fydd modd troi'n ôl ar ôl "
-"cadarnhau.\n"
-"\n"
-" !! Os ydych yn dewis hwn, byddwch yn colli'r holl ddata ar eich disg. !!\n"
-"\n"
-" * \"Tynnu Windows\": bydd hwn yn dileu popeth o'r disg caled a chychwyn "
-"popeth\n"
-"o'r newydd, gan gynnwys creu rhaniadau newydd. Bydd yr holl ddata ar y ddisg "
-"yn\n"
-"cael ei golli\n"
-"\n"
-" !! Os ydych yn dewis hwn, byddwch yn colli'r holl ddata ar eich disg. !!\n"
-"\n"
-" * \"Modd Arbenigwr\": dewiswch hwn os ydych am rannu'r disg caled\n"
-"gyda llaw. Byddwch ofalus - mae'n ddewis pwerus a pheryglus. Mae modd\n"
-"i chi golli'ch holl ddata. Peidiwch dewis hwn oni bai eich bod yn gwybod "
-"beth\n"
-"ydych yn ei wneud."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Dyna ni. Mae'r gosodiad wedi ei gwblhau ac mae eich system GNU/Linux\n"
-"yn barod i'w ddefnyddio. Cliciwch \"Iawn\" i ailgychwyn y peiriant. Mae "
-"modd\n"
-"i chi gychwyn GNU/Linux neu Windows, prun bynnag sydd orau gennych\n"
-"(os oes gennych y ddwy system ar eich peiriant), gynted ag y bydd eich\n"
-"peiriant yn ail gychwyn. \n"
-"\n"
-"Mae'r botwm \"Uwch\" yn dangos dau fotwm:\n"
-"\n"
-" *\" creu disg meddal awto-gosod\": i greu disg meddal gosod fydd yn creu\n"
-"gosodiad cyflawn heb gymorth gweithredwr, yn debyg i'r gosodiad sydd\n"
-"newydd ei ffurfweddu.\n"
-"\n"
-"Sylwer bod dau ddewis gwahanol i'w gael wedi clicio'r botwm:\n"
-"\n"
-" *\"Ail chwarae\". Gosodiad rhannol awtomatig gan bod y cam o greu rhaniad\n"
-"yn cael ei hepgor.\n"
-"\n"
-" *Awtomeiddio\".Gosodiad cwbl awtomatig: mae'r disg caled wedi ei\n"
-"ailysgrifennu'n llwyr, a'r holl ddata wedi ei golli.\n"
-"\n"
-"Mae hwn yn nodwedd ddefnyddiol iawn pan yn gosod ar nifer fawr o beiriannau\n"
-"tebyg. Gw. yr adran Auto install ar ein safle gwe.\n"
-"\n"
-" *\"Cadw'r dewis o becynnau\": mae hyn yn cadw'r dewis o becynnau wnaed\n"
-"cynt. Yna wrth wneud gosodiad arall, rhowch ddisg meddal yn y gyrrwr a "
-"rhedeg\n"
-"y gosodiad gan fynd i'r sgrin cymorth drwy wasgu'r fysell [F1], a chyflwyno\n"
-">>linux defcfg=\"disg meddal\"<<.\n"
-"\n"
-"(*) Bydd angen disg meddal wedi ei fformatio fel FAT (i greu un yn GNU/"
-"Linux,\n"
-"teipiwch \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Rhaid i bob rhaniad sydd newydd eu henwi gael eu fformatio ar gyfer eu\n"
-"defnyddio (mae fformatio'n golygu creu system ffeilio)\n"
-"\n"
-"Efallai y byddwch eisiau ailfformatio rhai rhaniadau presennol i ddileu "
-"data\n"
-"sydd arnynt. Os ydych am wneud hynny, dewiswch y rhaniadau hynny hefyd.\n"
-"\n"
-"Sylwch nad oes angen ailfformatio'r holl raniadau sy'n bodoli eisoes. "
-"Rhaid \n"
-"ailfformatio'r rhaniadau sy'n cynnwys y system weithredu [megis \"/\",\"usr"
-"\"\n"
-"neu \"/var\") ond nid oes rhaid i chi ail fformatio rhaniadau sy'n cynnwys\n"
-"data rydych am ei gadw (e.e. \"/home\").\n"
-"\n"
-"Byddwch ofalus wrth ddewis rhaniadau. Ar ôl fformatio bydd yr holl ddata ar\n"
-"y rhaniadau'n cael eu dileu ac ni fydd modd ei adfer.\n"
-"\n"
-"Cliciwch \"Iawn\" pan ydych yn barod i fformatio rhaniadau.\n"
-"\n"
-"Cliciwch \"Dileu\" os ydych am ddewis rhaniad arall ar gyfer eich gosodiad\n"
-"Mandrake Linux newydd\n"
-"\n"
-"Cliciwch \"Uwch\" os ydych am ddewis rhaniadau i'w gwirio am flociau\n"
-"gwallus ar y ddisg."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Mae eich system weithredu Mandrake Linux newydd yn cael ei osod.\n"
-"Yn dibynnu ar y nifer o becynnau byddwch yn eu gosod a chyflymder\n"
-"eich cyfrifiadur, bydd yn cymryd rhwng ychydig o amser a sbel go lew.\n"
-"\n"
-"Amynedd..."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Ar yr adeg pan fyddwch yn gosod Mandrake Linux, mae'n debygol y bydd\n"
-"rhai pecynnau wedi eu diweddaru ers y rhyddhad cychwynnol. Bydd rhai \n"
-"gwallau wedi eu cywiro a materion diogelwch wedi eu datrys. I ganiatáu\n"
-"i chi fanteisio ar hyn mae cynnig i chi eu llwytho i lawr o'r rhyngrwyd.\n"
-"Dewiswch \"Iawn\" os oes gennych gyswllt gweithredol â'r rhyngrwyd,\n"
-"neu \"Na\"os ydych am osod pecynnau mwy diweddar rhywbryd eto.\n"
-"\n"
-"Bydd dewis \"Iawn\" yn dangos rhestr o leoedd o le mae modd derbyn\n"
-"diweddariadau. Dewiswch yr un agosaf atoch. Yna, bydd coeden dewis\n"
-"pecynnau yn ymddangos: Wedi i chi benderfynu ar eich dewis, cliciwch\n"
-"\"Gosod\" i estyn a gosod y pecynnau hynny neu \"Diddymu\" i beidio."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Cyn parhau dylech ddarllen amodau'r drwydded yn ofalus. Mae'n ymwneud\n"
-"â holl ddosbarthiad Mandrake Linux, ac os nad ydych yn cytuno â'r holl\n"
-"amodau, cliciwch ar fotwm \"Gwrthod\" fydd yn terfynu'r gosodiad yn syth.\n"
-"I barhau gyda'r gosodiad, cliciwch fotwm \"Derbyn\"."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Yma mae angen dewis lefel diogelwch ar gyfer y peiriant. Fel rheol,\n"
-"y mwyaf agored yw'r peiriant, y mwyaf pwysig yw'r data yr uchaf\n"
-"ddylai'r lefel diogelwch fod. Er hynny, mae diogelwch yn dod ar draul\n"
-"hwylustod. Gw. pennod MSEC yn y \"Reference Manual\" am\n"
-"wybodaeth ar ystyr y lefelau hyn\n"
-"\n"
-"Os nad ydych yn siwr beth i'w ddewis, dewiswch y rhagosodedig."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Yn awr mae angen i chi ddewis pa raniadau i'w defnyddio ar gyfer gosodiad\n"
-"eich system Mandrake Linux. Os oes rhaniadau wedi eu diffinio eisoes, un\n"
-"ai drwy osodiad blaenorol o GNU/Linux neu gan offeryn rhannu arall, mae\n"
-"modd i chi ddefnyddio'r rhaniadau presennol. Os nad, rhaid i' rhaniadau'r\n"
-"ddisg caled gael eu diffinio.\n"
-"\n"
-"I greu rhaniadau, rhaid yn gyntaf ddewis disg caled. Mae modd dewis disg\n"
-"i'w rannu drwy glicio ar \"hda\" ar gyfer y ddisg IDE cyntaf., \"hdb\" ar\n"
-"gyfer yr ail, \"sda\" ar gyfer y ddisg SCSI cyntaf, ac yn y blaen.\n"
-"\n"
-"I greu'r rhaniad, mae modd defnyddio'r dewisiadau hyn:\n"
-"\n"
-" *\"Clirio'r cyfan\": mae'r dewis hwn yn dileu pob rhaniad ar ddisg.\n"
-"\n"
-" *\"Awto ddynodi\": mae'r dewis hwn yn caniatáu i chi greu'n awtomatig\n"
-"Ext2 a rhaniadau cyfnewid mewn lle gwag ar eich disg.\n"
-"\n"
-" *\"Rhagor\": yn rhoi mynediad i ragor o nodweddion:\n"
-"\n"
-" *\"Cadw'r tabl rhaniad\": mae hwn yn cadw'r tabl rhaniad i ddisg\n"
-"meddal. Mae hyn yn ddefnyddiol ar gyfer adfer tabl rhaniad, os fydd angen\n"
-"\n"
-" \"Adfer y tabl rhaniad\": mae hyn yn caniatáu adfer tabl rhaniad "
-"blaenorol\n"
-"o ddisg meddal.\n"
-"\n"
-" \"Achub y tabl rhaniad\": os yw eich tabl rhaniad wedi ei ddifrodi, mae "
-"modd\n"
-"ceisio ei adfer drwy'r dewis yma. Byddwch ofalus a chofiwch fod modd iddo\n"
-"fethu.\n"
-"\n"
-" \"Ai-lwytho'r tabl rhaniad\": mae hwn yn dileu pob newid ac yn ail "
-"lwytho'r\n"
-"tabl rhaniad gwreiddiol.\n"
-"\n"
-" *\"awto osod cyfrwng symudol\": dad-diciwch y dewis hwn i osod a dad "
-"osod\n"
-"gyda llaw, cyfryngau symudol megis disgiau meddal ac CD-ROMau\n"
-"\n"
-" *\"Dewin\": defnyddiwch y dewis hwn os ydych am ddefnyddio'r dewin i "
-"rannu\n"
-"eich disg caled. Dyma'sydd orau os nad oes gennych wybodaeth sylweddol ar\n"
-"rhannu\n"
-"\n"
-" *\"Dadwneud\": defnyddiwch y dewis hwn i ddileu eich newidiadau\n"
-"\n"
-" *\"Newid o'r modd arferol/arbenigwr\": mae hwn yn caniatáu "
-"gweithredoedd\n"
-"pellach ar raniadau. (Math, dewisiadau, fformat) ac mae'n cynnig mwy o\n"
-" wybodaeth.\n"
-"\n"
-" *\"Gorffen\":pan fyddwch wedi gorffen rhannu eich disg, bydd hwn yn cadw\n"
-" eich newidiadau yn ôl i'r ddisg\n"
-"\n"
-"Sylwer: mae modd cyrraedd y dewisiadau drwy'r bysellfwrdd. Symudwch drwy'r\n"
-" rhaniadau gan ddefnyddio [Tab] a'r saethau [I Fyny/I Lawr].\n"
-"\n"
-"Pan fydd rhaniad wedi ei ddewis, medrwch ddefnyddio:\n"
-"\n"
-" *Ctrl-c i greu rhaniad newydd (pan fo rhaniad gwag yn cael ei ddewis);\n"
-"\n"
-" *Ctrl-d i ddileu rhaniad;\n"
-"\n"
-" *Ctrl-m i greu pwynt gosod;\n"
-"\n"
-"I dderbyn gwybodaeth am yr amrywiol systemau ffeil sydd ar gael, darllenwch "
-"y\n"
-" pennawd ar ext2fs yn y ``Reference Manual''.\n"
-"\n"
-"Os ydych yn gosod ar beiriant PPC, bydd angen i chi greu \"ymlwythwr\" HFS\n"
-" bychan o leiaf 1MB o faint, fydd yn cael ei ddefnyddio gan ymlwythwr "
-"yaboot.\n"
-"Os ydych yn dewis gwneud y rhaniad rhywfaint yn fwy, dyweder tua 50MB, yna\n"
-"gall fod yn le defnyddiol i gadw cnewyllyn sbâr a delweddau ramdisk ar "
-"gyfer\n"
-" sefyllfaoedd cychwyn argyfyngus!"
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mae mwy nag un rhaniad Microsoft wedi ei ganfod ar eich disg caled.\n"
-"Dewiswch ba un rydych am newid ei faint er mwyn gosod eich\n"
-"system weithredu Mandrake Linux newydd\n"
-"\n"
-"Mae pob rhaniad wedi ei restri fel hyn: \"Enw Linux\", \"Enw Microsoft\",\n"
-"\"Maint\".\n"
-"\n"
-"Mae \"Enw Linux\" wedi ei strwythuro fel hyn: \"math o ddisg caled\", \n"
-"\"rhif y disg caled\", \"rhif y rhaniad\" (e.e., \"hda1\").\n"
-"\n"
-"\"hd\" yw'r \"Math o ddisg caled\" os mai disg caled IDE sydd gennych\n"
-"a \"sd\" yw disg caled SCSI.\n"
-"\n"
-"Llythyren wedi'r \"hd\" neu \"sd\" yw'r \"Rhif disg caled\" bob tro.\n"
-"Gyda disgiau caled IDE:\n"
-"\n"
-" * mae \"a\" yn golygu \"prif ddisg caled ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"b\" yn golygu \"ddisg caled gwas ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"c\" yn golygu \"prif ddisg caled ar yr ail reolydd IDE\",\n"
-"\n"
-" * mae \"d\" yn golygu \"ddisg caled gwas ar yr ail reolydd IDE\",\n"
-"\n"
-"Gyda disgiau caled SCSI mae \"a\" yn golygu'r \"enw SCSI isaf\", ac mae\n"
-" \"b\" yn golygu'r \"ail enw SCSI isaf\", ag ati.\n"
-"\n"
-"Mae \"Enw Windows\" yn cyfeirio at y llythyren y disg caled o dan\n"
-" Windows (\"C:\" yw'r ddisg neu raniad cyntaf)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Amynedd... Gall y weithred hon gymryd rhai munudau."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Mae DrakX am wybod a ydych am wneud gosodiad rhagosodedig.\n"
-"Hwn sy'n cael ei (\"Argymell\") neu a ydych eisiau mwy o reolaeth\n"
-" (\"Arbenigwr\"). Mae gennych hefyd y dewis o wneud gosodiad newydd neu\n"
-" uwchraddio system Mandrake Linux cyfredol.\n"
-"\n"
-" *\"Gosod\" Mae hwn yn dileu'r hen system yn llwyr. Mewn gwirionedd, yn\n"
-"dibynnu ar ffurf eich peiriant, bydd modd cadw rhai hen raniadau (Linux neu\n"
-"eraill) heb eu newid.\n"
-"\n"
-" *\"Uwchraddio\" Mae'r gosodiad yn caniatáu i chi uwchraddio'r pecynnau\n"
-"sydd wedi eu gosod ar eich system Mandrake Linux. Bydd yn cadw'r rhaniadau\n"
-"cyfredol ar eich disg caled yn ogystal â ffurfweddiad defnyddwyr. Mae pob\n"
-"cam ffurfweddiad arall ar gael fel mewn gosodiad arferol.\n"
-"\n"
-" *\"Uwchraddio Pecynnau'n Unig\" Mae hwn yn ddewis newydd i ganiatáu\n"
-"uwchraddio system Mandrake Linux cyfredol tra'n cadw'r holl ffurfweddiad\n"
-"system heb ei newid. Mae ychwanegu pecynnau newydd i'r system hefyd \n"
-"yn bosibl.\n"
-"\n"
-"Dylai'r uwchraddiad weithio gyda systemau Mandrake Linux yn cychwyn\n"
-"o rifyn \"8.1\" \n"
-"\n"
-"Gan ddibynnu ar eich gwybodaeth am GNH/Linux, dewiswch un o'r canlynol:\n"
-"\n"
-" *Argymhellir: dewiswch hwn os nad ydych wedi gosod system weithredu\n"
-"GNU/Linux o'r blaen. Bydd y gosod yn hawdd a bydd ond rhaid i chi ateb\n"
-"rhai cwestiynau\n"
-"\n"
-" *Arbenigwr: os oes gennych wybodaeth drylwyr am GNU/Linux, mae modd\n"
-"i chi ddewis y math yma o osodiad. Bydd hwn yn caniatáu i chi osod y system\n"
-"yn ôl eich gofynion eich hun. Bydd ateb rhai o'r cwestiynau'n anodd os nad\n"
-"oes gennych wybodaeth drylwyr o GNU/Linux, felly peidiwch â dewis hwn os\n"
-" nad ydych yn gwybod beth rydych yn ei wneud."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Fel arfer mae DrakX yn dewis y bysellfwrdd cywir ar eich cyfer ( gan "
-"ddibynnu pa\n"
-" iaith rydych wedi ei ddewis) ac ni fyddwch yn gweld y cam hwn. Er hynny,\n"
-"efallai nad oes gennych fysellfwrdd sy'n cyfateb yn union i'ch iaith: e.e., "
-"os ydych\n"
-"yn Americanwr sy'n siarad Cymraeg, efallai eich bod am gadw eich "
-"bysellfwrdd\n"
-"Americanaidd. Neu os ydych yn siarad Cymraeg ac yn byw yn Hong Kong mae'r\n"
-" un sefyllfa'n codi. Yn y ddwy achos bydd angen i chi fynd yn ôl i'r cam yma "
-"yn y\n"
-" gosodiad a dewis y bysellfwrdd perthnasol o'r rhestr.\n"
-"\n"
-"Cliciwch ar fotwm \"Rhagor\" i dderbyn y rhestr lawn o fysellfyrddau sy'n "
-"cael eu\n"
-" cynnal.\n"
-" "
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Dewiswch eich dewis iaith ar gyfer y gosod a'r defnydd o'r system\n"
-"\n"
-"Bydd clicio ar y botwm \"Uwch\" yn caniatáu i chi ddewis ieithoedd eraill "
-"i'w\n"
-" gosod ar eich peiriant gwaith. Bydd dewis ieithoedd eraill yn gosod "
-"ffeiliau\n"
-" penodol sy'n cynnwys dogfennaeth a rhaglenni yn yr ieithoedd hynny.\n"
-"Er enghraifft, os ydych yn westeiwr ar gyfer defnyddwyr o Sbaen, dewiswch \n"
-" Gymraeg fel y brif iaith yn golwg coeden ac yn yr adran Uwch cliciwch ar "
-"y \n"
-"seren lwyd sy'n cyfateb i \"Spaeneg|Sbaen\". \n"
-"\n"
-"Sylwer bod modd gosod myw nag un iaith. Unwaith i chi ddewis unrhyw \n"
-"leoleiddiad ychwanegol cliciwch y botwm \"Iawn\" i barhau."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Drwy ragosodiad mae DrakX yn cymryd bod gennych lygoden dau fotwm a bydd yn "
-"ei osod i efelychu botwm tri. Bydd DrakX yn gwybod yn awtomatig p'un a'i "
-"yw'n lygoden PS/2, cyfresol neu USB.\n"
-"\n"
-" Os hoffech chi bennu math arall o lygoden, dewiswch y math priodol o'r "
-"rhestr.\n"
-"\n"
-"Os byddwch yn dewis llygoden ar wahân i'r rhagosodedig, byddwch yn gweld "
-"ffenestr profi'r llygoden. Defnyddiwch y botymau a'r olwyn i wneud yn siwr "
-"fod y gosodiadau'n gweithio. Os nad yw'r llygoden yn gweithio'n iawn pwyswch "
-"ar y bylchwr neu [Return] i \"Dileu\" a dewis eto."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Dewiswch y porth cywir. Mae porth \"COM1\" o dan MS Windows yn cael ei alw "
-"yn\n"
-"\"ttyS0\" yn GNU/Linux, e.e."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Mae hwn yn fan pwysig ynghylch diogelwch eich system GNU/Linux; rhaid\n"
-"rhoi cyfrinair \"root\".\"root\" yw gweinyddwr y system a'r unig un sydd â'r "
-"hawl\n"
-"i wneud diweddariadau, ychwanegu defnyddwyr, newid ffurfweddiad cyffredinol\n"
-"y system, ac yn y blaen. Yn fyr mae \"root\" yn medru gwneud popeth! Dyna\n"
-"pam mae'n rhaid dewis cyfrinair sy'n anodd ei ddyfalu - bydd DrakX yn dweud\n"
-" wrthych os yw'n rhy hawdd. Fel y gwelwch, mae modd peidio gorfod cynnig\n"
-" cyfrinair, ond rydym yn argymell yn erbyn hyn, hyd yn oed am un rheswm:\n"
-" peidiwch â meddwl bod eich systemau gweithredu eraill yn ddiogel rhag\n"
-" camgymeriadau, gan eich bod wedi cychwyn o GNU/Linux. Gan fod \"root\" yn\n"
-" medru goresgyn unrhyw gyfyngiadau a dileu data'n anfwriadol ar bob "
-"rhaniad,\n"
-" drwy fynd at y rhaniadau'n ddi-hid, yna mae'n bwysig ei gwneud hi'n anodd "
-"bod\n"
-" yn \"root\".n\n"
-"Dylai'r cyfrinair fod yn gyfuniad o rifau a llythrennau ac o leiaf 8 nod o "
-"hyd.\n"
-" Peidiwch ysgrifennu'r cyfrinair ar bapur - bydd yn ei gwneud hi'n rhy "
-"hawdd\n"
-" gwanhau'r system.\n"
-"\n"
-"Er hynny, peidiwch â gwneud y cyfrinair yn rhy hir neu gymhleth am fod rhaid "
-"i\n"
-"chi fedri ei gofio heb ormod o drafferth.\n"
-"\n"
-"Ni fydd y cyfrinair yn cael ei ddangos ar y sgrin wrth i chi ei deipio. "
-"Felly bydd\n"
-" rhaid i chi deipio'r cyfrinair ddwywaith i leihau'r siawns o deipio gwall. "
-"Os ydych\n"
-"yn digwydd gwneud yr un gwall teipio ddwywaith, bydd rhaid defnyddio'r "
-"cyfrinair\n"
-" \"anghywir\" i gychwyn y tro cyntaf.\n"
-"\n"
-"Yn y modd arbenigwr, bydd gofyn os fyddwch yn cysylltu â gwasanaethwr\n"
-"dilysu, megis NIS neu LDAPl\n"
-"\n"
-"Os yw eich rhwydwaith yn defnyddio protocol LDAP (neu NIS) ar gyfer dilysu,\n"
-" dewiswch \"LDAP\" (neu \"NIS\") fel dilyswr. Os nad ydych yn gwybod,\n"
-" gofynnwch i'ch gweinyddwr system.\n"
-"\n"
-"Os nad yw eich cyfrifiadur wedi ei gysylltu i unrhyw rwydwaith wedi ei "
-"weinyddu,\n"
-" byddwch angen dewis \"Ffeiliau lleol\" ar gyfer dilysu."
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"Mae LILO a grub yn llwythwyr cychwyn ar gyfer GNU/Linux. Fel rheol\n"
-"mae'r cam yma'n gwbl awtomatig. Mewn gwirionedd mae DrakX yn\n"
-"dadansoddi'r adran gychwyn ac yn gweithredu ar yr hyn mae'n ei ganfod\n"
-"yma:\n"
-" *os yw'n canfod adran gychwyn Windows mae'n gosod adran cychwyn\n"
-"grub/LILO yno yn ei le. Felly bydd modd i chi gychwyn un ai GNU/Linux\n"
-"neu system weithredu arall.\n"
-"\n"
-" *os fydd yn canfod adran gychwyn grub neu LILO, bydd yn gosod un mwy\n"
-"diweddar yn ei le.\n"
-"\n"
-"Os oes amheuaeth, bydd DrakX yn dangos blwch deialog gyda dewisiadau.\n"
-"\n"
-" * \"Llwythwr cychwyn i'w ddefnyddio\": mae gennych dri dewis:\n"
-"\n"
-" * \"GRUB\":os mae'n well gennych grub (dewislen testun)\n"
-"\n"
-" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych LILO gyda'i\n"
-"rhagwyneb graffigol.\n"
-"\n"
-" * \"LILO\" gyda dewislen raffigol\": os mae'n well gennych rhagwyneb "
-"dewislen\n"
-"testun.\n"
-"\n"
-" * \"Dyfais cychwyn\": yn y rhan fwyaf o achosion ni fyddwch yn newid\n"
-"y rhagosodedig (\"/dev/hda\"), ond os mae'n well gennych, gall y llwythwr\n"
-"cychwyn gael ei osod ar yr ail ddisg caled (\"/dev/hdb\"), neu hyd yn oed "
-"ar\n"
-"ddisg meddal (\"/dev/fd0\")\n"
-" * \"Oedi cyn cychwyn y ddelwedd rhagosodedig\": wrth ail gychwyn y "
-"cyfrifiadur\n"
-"dyma'r oedi sy'n caniatáu i'r defnyddiwr ddewis o fewn y ddewislen llwythwr "
-"cychwyn,\n"
-"llwythwr cychwyn arall yn lle'r un rhagosodedig.\n"
-"\n"
-"!!Gofalwch, os nad ydych yn gosod llwythwr cychwyn, (drwy ddewis \"Diddymu\" "
-"yma),\n"
-"rhaid i chi wneud yn siwr fod gennych fodd i gychwyn eich system Linux "
-"Mandrake.\n"
-"Hefyd, gwnewch yn siwr eich bod yn gwybod beth rydych yn ei wneud cyn newid "
-"y\n"
-"dewisiadau hyn!!\n"
-"\n"
-"Bydd clicio'r botwm \"Uwch\" yn y ddeialog yn cynnig nifer o ddewisiadau "
-"uwch,\n"
-"sydd yn cael eu cadw ar gyfer y defnyddiwr arbenigol.\n"
-"\n"
-"Wedi i chi ffurfweddi baramedrau'r llwythwr cychwyn cyffredinol, bydd rhestr "
-"o\n"
-"ddewisiadau cychwyn sydd ar gael wrth gychwyn, yn cael ei gynnig i chi.\n"
-"\n"
-"Os oes yna system weithredu arall ar eich peiriant, bydd yn cael ei "
-"ychwanegu'n\n"
-"awtomatig i'r ddewislen gychwyn. Yma cewch wneud mân newidiadau i'r "
-"dewisiadau\n"
-"presennol. Dewiswch enw a chliciwch \"Newid\" i'w newid neu ei dynnu;\n"
-"\"Ychwanegu\" i greu enw newydd; a \"Gorffen\" i fynd ymlaen i'r cam nesaf "
-"o'r gosod."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"Mae LILO (the LInux LOader) a grub yn llwythwyr cychwyn: maent yn medru\n"
-"cychwyn un ai GNU/Linux neu unrhyw system weithredu arall sy'n bresennol\n"
-"ar eich cyfrifiadur. Fel rheol mae'r systemau hyn wedi eu canfod a'u gosod "
-"yn\n"
-"gywir. Os nad yw hyn yn gywir y tro yma, mae modd i chi ychwanegu cofnod\n"
-" gyda llaw ar y sgrin hwn. Byddwch ofalus i ddewis y paramedrau cywir\n"
-"\n"
-"Efallai na fyddwch eisiau rhoi mynediad i'r systemau gweithredu hyn i neb "
-"arall\n"
-"Os felly, gallwch ddileu'r cofnodion perthnasol.Ond bydd rhaid i chi greu "
-"disg\n"
-" cychwyn ar gyfer y systemau gweithredu rheini!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Rhaid i chi ddangos lle rydych am osod y wybodaeth angenrheidiol i gychwyn\n"
-"GNU/Linux\n"
-"Os nad ydych yn gwybod yn union beth rydych yn ei wneud, dewiswch \"First\n"
-"sector of drive (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Yma byddwn yn dewis system argraffu i'ch cyfrifiadur ei ddefnyddio. Efallai\n"
-"bod systemau eraill yn cynnig un i chi, ond mae Mandrake yn cynnig tri.\n"
-"\n"
-" *pdq\" - sy'n golygu \"print, don't queue\", Hwn yw'r dewis os oes gennych "
-"gysylltiad uniongyrchol â'ch argraffydd a'ch bod eisiau medru tynnu allan o "
-"waith argraffu pan mae'r papur wedi mynd yn sownd ac nad oes gennych "
-"argraffyddion wedi eu cysylltu drwy rwydwaith. Mae'n medru trin "
-"rhwydweithiau syml ac mae rhywfaint yn araf ar gyfer rhwydweithiau. Dewiswch "
-"\"pdq\" os mai dyma yw eich tro cyntaf yn GNU/Linux., mae modd i chi newid "
-"eich dewis ar ôl gosod drwy ddefnyddio PrinterDrake o Ganolfan Rheoli "
-"Mandrake a chlicio botwm arbenigwr\n"
-" *\"CUPS\" - \"Common Unix Printing System\". Mae hwn yn wych ar gyfer "
-"argraffu i argraffyddion lleol a hanner ffordd rownd y byd. Mae'n symlach, "
-"yn medru gweithredu fel gwasanaethwr neu cleient ar gyfer yr hen system \"lpd"
-"\",felly mae'n cydweddi â'r systemau sydd wedi mynd o'i flaen. Mae'n gallu "
-"gwneud nifer o driciau, ond mae bron mor syml i'w osod \"pdq\". Os ydych "
-"amgen hwn i efelychu gwasanaethwr \"lpd\", yna rhaid cychwyn daemon \"cups-"
-"lpd\". Mae ganddo wyneb graffigol ar gyfer argraffu neu ddewis dewisiadau "
-"argraffu.\n"
-"\n"
-" *\"lprNG\" - \"line printer daemon New Generation\" Mae'r system yma'n "
-"medru gwneud yn fras yr un pethau a'r lleill, ond mae'n medru argraffu i "
-"argraffyddion ar Novell Network, gan ei fod yn cynnal protocol IPX, ac mae'n "
-"medru argraffu 'n uniongyrchol i orchmynion cragen.. Os oes angen Novell neu "
-"argraffu i orchmynion heb luniad peipen ar wahân, defnyddiwch lprNG. Yn "
-"gyffredinol, mae CUPS yn well am ei fod yn syml ac yn well wrth weithio ar "
-"draws rhwydwaith."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Mae DrakX yn canfod unrhyw ddyfais IDE sydd ar eich cyfrifiadur. Bydd yn\n"
-"chwilio am un neu fwy o gardiau SCSI PCI ar eich system. Os oes Cerdyn "
-"SCSI'n cael ei ganfod bydd DrakX yn awtomatig yn gosod y gyrrwr priodol.\n"
-"\n"
-"Oherwydd nad yw canfod caledwedd bob tro'n canfod darn o galedwedd, bydd\n"
-" DrakX yn gofyn i chi gadarnhau os oes cerdyn SCSI PCI yn bresennol. "
-"Cliciwch\n"
-"\"Oes\" os ydych yn gwybod bod cerdyn SCSI wedi ei osod ar eich peiriant. \n"
-"Bydd rhestr o gardiau SCSI'n ymddangos i chi ddewis un. Cliciwch \"Na\" os\n"
-"nad oes gennych galedwedd SCSI. Os nad ydych yn siwr, gallwch edrych ar y\n"
-" rhestr o galedwedd sydd wedi ei ganfod ar eich peiriant drwy ddewis\n"
-" \"Gwybodaeth am galedwedd\" a chlicio \"Iawn\". Edrychwch yn fanwl ar y\n"
-"rhestr a chlicio'r botwm \"Iawn\" i fynd yn ôl i'r cwestiwn rhag wyneb "
-"SCSI.\n"
-"\n"
-"Os ydych wedi pennu eich addaswr gyda llaw, bydd DrakX yn gofyn i chi s\n"
-" ydych am bennu dewisiadau ar ei gyfer. Dylech adael i DrakX ofyn i'r cerdyn "
-"am\n"
-" ddewisiadau penodol i'r cerdyn mae angen i'r caledwedd eu cychwyn. Mae hyn\n"
-"fel rheol yn gweithio'n dda\n"
-"\n"
-"Os nad yw DrakX yn medru holi am y dewisiadau sydd eu hangen, bydd rhaid i\n"
-" chi ddarparu'r dewisiadau gyda llaw. Darllenwch yr ``User "
-"Guide'' (pennod3,\n"
-" adran \"Collecting Information on Your Hardware\") am syniadau ar sut i "
-"gael y\n"
-" paramedrau angenrheidiol o ddogfennau'r caledwedd, o safle gwe'r "
-"gwneuthurwr\n"
-" (os oes gennych gysylltiad â'r Rhyngrwyd) neu oddi wrth Microsoft Windows "
-"(os\n"
-" ydych wedi defnyddio'r caledwedd gyda Windows ar eich system)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Mae modd i chi gynnig cofnodion eraill ar gyfer yaboot, un ai systemau\n"
-" gweithredol eraill, cnewyll eraill, neu ddelwedd cychwyn argyfwng.\n"
-"\n"
-"Ar gyfer systemau gweithredu eraill, mae'r cofnod yn cynnwys label a'r "
-"rhaniad\n"
-" root yn unig\n"
-"\n"
-"Ar gyfer LInux, mae yna rhai dewisiadau:\n"
-"\n"
-" *Label:sef yr enw fyddwch yn ei deipio yn anogwr yaboot i ddewis y dewis\n"
-" cychwyn.\n"
-"\n"
-" *Image: hwn fydd enw'r cnewyllyn i'w gychwyn. Fel rheol, vimlinux neu\n"
-"amrywiad ohono gydag estyniad\n"
-"\n"
-" *Root: y ddyfais \"root\" neu \"/\" ar gyfer eich gosodiad Linux.\n"
-"\n"
-" *Append: ar galedwedd Apple, mae dewis atodi cnewyllyn yn cael ei\n"
-" ddefnyddio'n eithaf aml i gynorthwyo cychwyn caledwedd fideo neu i alluogi\n"
-" efelychiad o'r llygoden bysellfwrdd sydd ar goll ar yr ail a'r trydydd "
-"botwm\n"
-"llygoden llygod arferol Apple. Dyma rhai enghreifftiau:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: mae modd defnyddio'r dewis hwn i un ai lwytho'r modiwlau "
-"cychwynnol,\n"
-" cydnabod y ddyfais cychwyn ar gael, neu i lwytho delwedd ramdisg ar gyfer\n"
-" cychwyn argyfwng.\n"
-"\n"
-" * Initrd-size: maint y ddelwedd ramdisg arferol yw 4,096bid. Os ydych "
-"angen\n"
-"dyrannu ramdisg mawr, mae modd defnyddio'r dewis hwn.\n"
-"\n"
-" * Read-write:fel rheol mae'r rhaniad \"root\" yn cael ei agor fel darllern "
-"yn unig, i\n"
-" ganiatáu gwiriad system ffeiliau cyn i'r system ddod yn \"fyw\". Yma mae "
-"modd\n"
-" diystyru'r dewis hwn.\n"
-"\n"
-" * NoVideo: petai caledwedd Apple yn profi i fod yn peri anhawsterau "
-"sylweddol,\n"
-" mae modd i chi ddewis cychwyn mewn modd \"novideo\", gyda chynhaliaeth\n"
-" ffrâm byffer cynhenid\n"
-"\n"
-" * Default: dyma'r cyflwr rhagosodedig, dewiswch hwn drwy bwyso ENTER at\n"
-" anogwr yaboot. Bydd y cofnod hefyd wedi ei amlygu gyda \"*\", os wnewch "
-"chi\n"
-" bwyso ar [Tab] i weld dewisiadau'r cychwyn."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot yw llwythwr cychwyn ar gyfer caledwedd NewWorld MacIntosh. Mae'n \n"
-"medru cychwyn GNU/Linux, MacOS neu MacOSX os ydynt ar eich peiriant. Fel\n"
-" rheol, mae'r systemau gweithredu hyn yn cael eu canfod yn gywir a'u gosod. "
-"Os\n"
-" nad yw hyn yn digwydd, mae modd i chi ychwanegu eu cofnod gyda llaw ar y\n"
-" sgrin hwn. Byddwch ofalus i ddewis y paramedrau cywir.\n"
-"\n"
-"Prif ddewisiadau Yaboot yw:\n"
-"\n"
-" * Cychwyn Neges: neges testun sym lsy'n cael ei ddangos cyn yr anogwr\n"
-" cychwyn\n"
-"\n"
-" * Cychwyn y Ddyfais: yn dangos lle rydych am osod y wybodaeth "
-"angenrheidiol\n"
-"i gychwyn GNU/Linux. Yn gyffredinol, byddwch wedi creu rhaniad ymlwythwr yn\n"
-" gynt, i ddal y wybodaeth.\n"
-"\n"
-" * Oediad Open Firmware: yn wahanol i LILO, mae yna ddau oediad ar gael "
-"gyda\n"
-" yaboot. Mae'r cyntaf yn cael ei fesur mewn eiliadau a dyma pryd hyn mae "
-"modd\n"
-" dewis rhwng CD, cychwyn OF, MacOS neu Linux\n"
-"\n"
-" * Oediad Cychwyn y Cnewyllyn: mae'r oediad yn debyg i oediad cychwyn LILO.\n"
-"WEdi dewis Linux, bydd oediad o 0.1 eiliad cyn bod eich cnewyllyn "
-"rhagosodedig\n"
-" yn cael ei ddewis.\n"
-"\n"
-" * Galluogi Cychwyn o'r CD?: mae dewis hwn yn caniatáu i chi ddewis \"C\" "
-"am\n"
-"CD ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * Galluogi Cychwyn OF?: mae dewis hwn yn caniatáu i chi ddewis |\"N\" am\n"
-" Open Firmware ar anogwr y cychwyn cyntaf.\n"
-"\n"
-" * System Weithredu Rhagosodedig: mae modd dewis pa system weithredu fydd\n"
-"yn cychwyn drwy ragosodiad pan ddaw'r Open Firmware i ben."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Dyma amrywiol baramedrau ynghylch eich peiriant. Yn ddibynnol ar eich\n"
-"caledwedd, mae'n bosibl i chi weld y rhain, neu beidio\n"
-"\n"
-" *\"Llygoden\": edrychwch ar ffurfweddiad presennol y llygoden a chliciwch "
-"ar y\n"
-" botwm i'w newid os oes angen.\n"
-"\n"
-" *\"Bysellfwrdd\" edrychwch ar ffurfweddiad presennol y bysellfwrdd a "
-"chliciwch\n"
-"ar y\n"
-" botwm i'w newid os oes angen.\n"
-"\n"
-" *\"Cylchfa amser\" Mae DrakX, yn dyfalu eich cylchfa amser o'r iaith "
-"rydych\n"
-" wedi ei dewis. Eto fel gyda bysellfwrdd efallai nad ydych yn y wlad sy'n "
-"cyfateb i'r\n"
-" dewis iaith. Felly, mae'n bosibl y bydd angen i chi glicio ar fotwm "
-"\"Cylchfa\n"
-" amser\" i ffurfweddi'r cloc yn ôl y gylchfa amser rydych ynddi.\n"
-"\n"
-" *\"Argraffydd\": bydd clicio ar y botwm \"Dim argraffydd\" yn agor y dewin\n"
-" ffurfweddi.\n"
-"\n"
-" *\"Cerdyn sain\": os oes cerdyn sain yn cael ei ganfod ar eich system, bydd "
-"yn\n"
-"cael ei ddangos yma. Nid oes modd creu newidiadau adeg y gosodiad.\n"
-"\n"
-" *\"Cerdyn teledu\": os oes cerdyn teledu yn cael ei ganfod ar eich system, "
-"bydd\n"
-" yn cael ei ddangos yma. Nid oes modd creu newidiadau adeg y gosodiad.\n"
-"\n"
-" *\"Cerdyn IDSN\":os oes cerdyn IDSN yn cael ei ganfod ar eich system, bydd\n"
-" yn cael ei ddangos yma. Mae modd clicio ar y botwm i newid y paramedrau\n"
-" cysylltiedig."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Dewiswch y ddisg galed rydych am ei ddileu er mwy n gosod eich rhaniad\n"
-"Mandrake Linux newydd. Byddwch ofalus, bydd yr holl ddata sydd arno'n\n"
-"cael ei ddileu ac ni fydd modd ei adfer!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliciwch \"Iawn\" os ydych am ddileu'r holl ddata a rhaniadau sy'n bresennol "
-"ar y disg galed hwn. Byddwch ofalus, wedi i chi glicio \"Iawn\" ni fydd modd "
-"i chi adfer unrhyw ddata na rhaniadau presennol ar y disg caled, gan gynnwys "
-"data Windows.\n"
-"\n"
-"Cliciwch \" Diddymu\" i ddiddymu'r weithred hon heb golli unrhyw ddata a "
-"rhaniadau sy'n bresennol ar y ddisg galed."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Methu cael mynediad i fodiwlau'r cnewyllyn sy'n cyfateb i'ch cnewyllyn chi "
-"(mae ffeil %s ar goll), mae hyn yn golygu, fel arfer, nad yw eich disg "
-"cychwyn yn cydweddu gyda'r cyfrwng Gosod (crëwch ddisg cychwyn meddal newydd)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Rhaid fformatio %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Rydych wedi dewis y gwasanaethwr(wyr) canlynol: %s\n"
-"\n"
-"\n"
-"Mae'r gwasanaethwyr canlynol yn cael eu cychwyn drwy ragosodiad. Nid oes "
-"ganddynt unrhyw faterion diogelwch hysbys, ond mae'n bosibl i rai ddod i'r "
-"golwg. Os felly rhaid uwchraddio gynted ag y bo modd\n"
-"\n"
-"Ydych chi wir eisiau gosod y gwasanaethwyr hyn?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Methu defnyddio darlledu heb parth NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Rhowch ddisg meddal wedi ei fformatio i FAT yng ngyrrwr %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Nid yw 'r disg meddal hwn wedi ei fformatio i FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"I ddefnyddio'r dewis o becynnau wedi eu cadw, cychwynnwch y gosodiad gyda "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gwall wrth ddarllen ffeil %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Mae peth caledwedd ar eich cyfrifiadur angen gyrwyr \"priodol\" i weithio.\n"
-"Mae rhywfaint o wybodaeth i'w gael amdanynt yn %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Rhaid bod gennych raniad gwraidd.\n"
-"Crëwch raniad (neu glicio ar un presennol)\n"
-"Yna dewiswch weithred \"Pwynt Gosod\" a'i osod i `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Rhaid cael rhaniad cyfnewid"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nid oes gennych raniad cyfnewid\n"
-"\n"
-"Parhau beth bynnag?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Rhaid bod gennych raniad FAT wedi ei osod yn /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Defnyddiwch le gwag"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nid oes digon o le i ddynodi rhaniadau newydd"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Defnyddiwch y rhaniadau cyfredol"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nid oes rhaniad cyfredol i'w ddefnyddio"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Defnyddiwch rhaniad Windows ar gyfer cylch-ol"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pa raniad hoffech chi ei ddefnyddio ar gyfer Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Dewiswch y maint"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Maint rhaniad gwraidd mewn MB :"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Maint rhaniad cyfnewid mewn MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Defnyddiwch y lle gwag ar raniad Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Pa raniad ydych chi am newid ei faint?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Mesur ffiniau system ffeilio Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Nid yw'r newidiwr maint FAT yn medru trin eich rhaniad.\n"
-"digwyddodd y gwall canlynol: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Mae eich rhaniad Windows yn rhy ysgyriog, rhedwch \"defrag\" yn gyntaf"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"RHYBUDD!\n"
-"\n"
-"Bydd DrakX yn newid maint eich rhaniad Windows. Byddwch\n"
-"ofalus: mae gwneud hyn yn beryglus. Os nad ydych wedi\n"
-"gwneud yn barod, dylech fynd allan o'r gosod, rhedeg scandisk\n"
-"yn Windows (ac os oes modd defrag), yna ail gychwyn y gosodiad.\n"
-"Dylech hefyd wneud copi wrth gefn o'ch data.Pan rydych yn siwr, cliciwch "
-"Iawn."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Pa faint ydych am ei gadw ar gyfer Windows ar"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "rhaniad %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Methodd newid maint FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nid oes rhaniadau FAT i newid eu maint neu i'w defnyddio fel cylch-ôl (neu "
-"nad oes digon o le ar ôl)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Dileu'r ddisg gyfan"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Tynnu Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Mae gennych fwy nag un disg caled, ar ba un ydych am osod linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Bydd pob rhaniad a'u data yn cael ei ddileu ar yrrwr %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Rhannu disg unigol"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Defnyddiwch fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Medrwch rhannu %s\n"
-"Wedi gorffen, peidiwch anghofio cadw gyda 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Does gennych ddim digon o le rhydd ar eich rhaniad Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Methu canfod lle ar gyfer gosod"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Daeth dewin Rhannu DrakX o hyd i'r atebion canlynol:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Methodd rhannu: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Cychwyn y rhwydwaith"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Cau'r rhwydwaith"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Digwyddodd gwall ond wn i ddim sut i ddelio ag ef yn dwt.\n"
-"Mae'n beryglus i barhau."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pwynt gosod dyblyg %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Methodd rhai pecynnau pwysig a chael eu gosod yn gywir.\n"
-"Un ai mae eich gyrrwr CD-ROM neu eich CD-ROM yn wallus.\n"
-"Gwiriwch y CD-ROM ar gyfrifiadur wedi ei osod gan ddefnyddio \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Croeso i %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Does dim gyrrwr disg meddal ar gael"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Cychwyn cam '%s\"\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Mae eich system yn brin o adnoddau. Efallai y cewch anhawsterau wrth osod\n"
-"Mandrake Linux. Os bydd hynny'n digwydd, gallwch geisio gwneud gosodiad\n"
-"testunol. I wneud hynny, gwasgwch F1 wrth gychwyn ar y CD-ROM ac yna rhoi "
-"'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Gosod Dosbarth"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Dewiswch un o'r dosbarthiadau canlynol o osodiad::"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Cyfanswm maint y grwpiau rydych wedi eu dewis yw tua %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Os hoffech chi osod llai na'r maint hwn\n"
-"dewiswch canran y pecynnau i'w gosod.\n"
-"\n"
-"Dim ond y pecynnau pwysicaf fydd yn cael eu gosod gyda chanran\n"
-"isel; tra bydd canran o 100% yn llwytho'r holl becynnau."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Dim ond ar gyfer %d%% o'r pecynnau hyn mae gennych le.\n"
-"\n"
-"Os hoffech osod llai na hyn,\n"
-"dewiswch canran y pecynnau rydych am eu gosod.\n"
-"Dim ond y pecynnau pwysicaf fydd yn cael eu gosod gyda chanran\n"
-"isel; tra bydd canran o %d%% yn llwytho'r gymaint o becynnau ag\n"
-"y mae modd."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Dydd modd eu dewis yn fwy penodol yn y cam nesaf."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Cyfanswm y pecynnau i'w gosod"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Dewis y Grwp Pecyn"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Dewis pecynnau unigol."
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Cyfanswm maint: %d/%d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pecyn gwallus"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Enw: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Fersiwn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Maint: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Pwysigrwydd: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Nid oes modd i chi ddewis y pecyn hwn - does dim lle ar ol i'w osod"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Mae'r pecynnau canlynol i'w gosod"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Bydd y pecynnau canlynol yn cael eu tynnu"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Does dim modd i chi ddewis/dad-ddewis y pecyn"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Mae hwn yn becyn hanfodol, does dim modd ei ddad-ddewis"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Does dim mod dad-ddewis y pecyn, mae wedi ei osod yn barod"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Rhaid i'r pecyn gael ei uwchraddio\n"
-"Ydych chi'n siwr eich bod am ei ddad-ddewis?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Does dim mod dad-ddewis y pecyn hwn. Rhaid ei ddiweddaru"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Dangoswch y pecynnau dewis awtomatig"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Gosodiad"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "LLwytho/Cadw ar ddisg meddal"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Diweddaru'r dewis pecynnau"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Gosodiad lleiaf"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Dewiswch y pecynnau hoffech chi eu gosod"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Gosod"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Amcangyfrif"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Amser yn weddill"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Arhoswch, paratoi'r gosodiad"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pecyn"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Gosod pecynnau %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Derbyn"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Gwrthod"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Newidiwch eich CD-ROM\n"
-"\n"
-"Rhowch yr CD-ROM sydd wedi ei labeli \"%s\" yn eich gyrrwr a chlicio Iawn\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi gosod o'r CD-ROM hwn."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Mynd yn ein blaen beth bynnag?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Roedd gwall wrth drefnu pecynnau"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Digwyddodd gwall wrth osod pecyn"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-" Rhybudd\n"
-"\n"
-"Darllenwch yr amodau isod yn ofalus. Os ydych yn anghytuno gydag unrhyw\n"
-" ddarn, nid oes caniatâd i chi osod y cyfrwng CD nesaf. Pwyswch 'Gwrthod' i\n"
-" barhau'r gosodiad heb ddefnyddio'r cyfryngau hyn.\n"
-"\n"
-"Nid yw rhai cydrannau ar y CDau canlynol yn cael eu rheoli gan Drwydded GPL\n"
-" neu gytundebau tebyg. Mae'r cydrannau hynny'n cael eu rheoli gan dermau ac\n"
-" amodau ei drwydded benodol ei hun. Darllenwch yn ofalus a chadwch at y\n"
-" trwyddedau penodol cyn defnyddio neu ddosbarthu'r cydrannau hynny.\n"
-"\n"
-"Mae'r trwyddedau hynny'n atal yn gyffredinol, drosglwyddiad, dyblygu (ar "
-"wahân i\n"
-" bwrpas cadw wrth gefn), dosbarthu, cildroi peirianyddol, dadcydosod,\n"
-" dadgrynhoi neu newid y cydrannau. Bydd unrhyw dorri ar yr amodau hyn yn\n"
-"terfynu eich hawl o dan y drwydded benodol. Oni bai ei fod yn rhoi'r hawl i "
-"chi,\n"
-"nid oes modd i chi osod y rhaglenni ar fwy nag un system na'i addasu ar "
-"gyfer\n"
-" defnydd ar rwydwaith. Os oes amheuaeth, cysylltwch yn uniongyrchol â\n"
-"dosbarthwr neu olygydd y cydrannau hynny.\n"
-"Mae trosglwyddo i drydydd parti neu gopďo'r cydrannau hynny gan gynnwys y\n"
-" ddogfennaeth, wedi ei wahardd fel rheol\n"
-"\n"
-"Mae pob hawl i gydrannau'r cyfrwng CD nesaf yn perthyn i' hawduron "
-"perthnasol\n"
-" ac maent wedi eu hamddiffyn drwy gyfreithiau eiddo deallusol a hawlfraint "
-"sy'n\n"
-" berthynol i raglenni meddalwedd.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Digwyddodd gwall"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Ydych chi wir eisiau gadael y gosodiad?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Cytundeb trwyddedu"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Cyflwyniad\n"
-"\n"
-"Bydd y system weithredu a'r cydrannau gwahanol sydd o fewn dosbarthiad "
-"Mandrake Linux yn\n"
-"cael eu galw yn \"Gynnyrch Meddalwedd\" o hyn ymlaen. Mae'r Cynnyrch "
-"Meddalwedd yn\n"
-"cynnwys, ond heb eu cyfyngu, i'r casgliad o raglenni , dulliau, rheolau a "
-"dogfennau mewn\n"
-"perthynas â'r system weithredu a chydrannau gwahanol dosbarthiad Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"1. Cytundeb Trwyddedu\n"
-"\n"
-"Darllenwch y ddogfen hon yn ofalus. Mae'r ddogfen hon yn gytundeb trwyddedu "
-"rhyngoch\n"
-"chi â MandrakeSoft S.A,. sy'n berthnasol i'r Cynnyrch Meddalwedd.\n"
-"\n"
-"Wrth osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn unrhyw fodd, "
-"rydych yn\n"
-"amlwg yn derbyn ac yn llawn cytuno i gadw at delerau ac amodau'r Drwydded "
-"hon.\n"
-"Os ydych yn anghytuno ag unrhyw rhan o'r cytundeb, ni chewch ganiatâd i "
-"osod, dyblygu\n"
-"neu ddefnyddio'r Cynnyrch Meddalwedd.\n"
-"Bydd unrhyw ymgais i osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn "
-"modd\n"
-"nad yw'n cyd-fynd â thelerau ac amodau'r Drwydded yn ddi-rym a bydd yn "
-"terfynu eich\n"
-"hawliau o dan y Drwydded hon. Ar ddiwedd y Drwydded, rhaid i chi "
-"ddinistrio'n syth pob\n"
-"copi o'r Cynnyrch Meddalwedd.\n"
-"\n"
-"\n"
-"2. Gwarant Gyfyngedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd a'r ddogfennaeth gysylltiedig yn cael eu darparu "
-"\"fel ag y maent\",\n"
-"heb ddim gwarant, hyd y mae'r gyfraith yn caniatáu.\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd ag "
-"y bydd y gyfraith yn\n"
-"caniatáu, am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol neu "
-"anuniongyrchol (gan\n"
-"gynnwys heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled "
-"ariannol, costau cyfreithiol,\n"
-"a chosb o ganlyniad i achos llys, neu unrhyw golled o ganlyniad) yn codi o'r "
-"defnydd neu'r anallu i\n"
-"ddefnyddio'r Cynnyrch Meddalwedd, hyd yn oed os yw MandrakeSoft wedi eu "
-"cynghori o'r posibilrwydd\n"
-"o'r fath iawn.\n"
-"\n"
-"CYFRIFOLDEB CYFYNGEDIG YN GYSYLLTIEDIG GYDA'R MEDDIANT NEU'R DEFNYDD O "
-"FEDDALWEDD\n"
-" GWAHARDDEDIG MEWN RHAI GWLEDYDD\n"
-"\n"
-"Ni fydd MandrakeSoft S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd y "
-"bydd y gyfraith yn caniatáu,\n"
-"i fod yn atebol am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol "
-"neu anuniongyrchol (gan gynnwys\n"
-"heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled ariannol, "
-"costau cyfreithiol, a chosb o ganlyniad\n"
-"i achos llys, neu unrhyw golled o ganlyniad) yn codi o lwytho i lawr "
-"cydrannau meddalwedd o un o safleoedd\n"
-" Mandrake Linux, sydd wedi eu gwahardd neu eu hatal mewn rhai gwledydd gan "
-"gyfreithiau lleol. Mae'r\n"
-"cyfrifoldeb cyfyngedig hwn yn perthyn i , ond heb ei gyfyngu i'r, cydrannau "
-"cryptograffiaeth cryf sy'n cael\n"
-"eu cynnwys o fewn y Cynnyrch Meddalwedd.\n"
-"3. Trwydded GPL a Thrwyddedau Cysylltiedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd yn cynnwys cydrannau sydd wedi eu creu gan "
-"bersonau a endidau gwahanol.\n"
-"Mae'r rhan fwyaf o'r cydrannau hyn yn cael eu llywodraethu gan dermau ac "
-"amodau Trwydded Gyhoeddus\n"
-"Cyffredinol (General Public Licence (GPL)), GNU, fydd yn cael ei gyfeirio "
-"ato o hyn ymlaen fel \"GPL\", neu\n"
-"drwyddedau cyffelyb.. Mae'r rhan fwyaf o'r trwyddedau'n caniatáu i chi "
-"ddefnyddio, dyblygu, addasu neu\n"
-" ailddosbarthu'r cydrannau maent yn eu cynnwys. Darllenwch delerau ac amodau "
-"trwydded pob cydran cyn\n"
-"eu defnyddio. Dylai pob cwestiwn am drwydded cydran gael ei ofyn i awdur y "
-"gydran ac nid i MandrakeSoft.\n"
-"Mae'r rhaglenni ddatblygwyd gan MandrakeSoft yn cael eu llywodraethu o dan "
-"Drwydded GLP. Mae'r dogfennau\n"
-" ysgrifennwyd gan MandrakeSoft S.A. yn cael eu llywodraethu gan drwydded "
-"benodol. Darllenwch y dogfennau\n"
-"am fwy o fanylion.\n"
-"\n"
-"4. Hawliau Eiddo Deallusol\n"
-"\n"
-"Mae pob hawl cydrannau'r Cynnyrch Meddalwedd yn perthyn i'w hawduron "
-"perthnasol ac wedi eu hamddiffyn\n"
-"gan gyfreithiau eiddo deallusol a hawlfraint sy'n berthnasol i raglenni "
-"meddalwedd. Mae MandrakeSoft yn cadw\n"
-"ei hawl i newid neu addasu ei Gynnyrch Meddalwedd, yn rhannol neu yn gyfan, "
-"drwy unrhyw ddull ac ar gyfer\n"
-"unrhyw bwrpas. Mae \"Mandrake\", \"Mandrake Linux\" a'r logos cysylltiedig "
-"yn nodau masnachol sy'n\n"
-"perthyn i MandrakeSoft S.A.\n"
-"\n"
-"5. Cyfreithiau Llywodraethol\n"
-"Os bydd unrhyw rhan o'r cytundeb hwn yn cael ei ddal yn ddi-rym, "
-"anghyfreithlon neu amherthnasol gan\n"
-"benderfyniad llys, bydd y rhan yma'n cael ei dynnu o'r cytundeb hwn. Byddwch "
-"yn parhau i fod yn rhwymedig\n"
-"i adrannau cymwys o'r cytundeb.\n"
-"Mae telerau ac amodau'r Drwydded hon yn cael eu llywodraethu gan Cyfreithiau "
-"Ffrainc. Mae'n ddymunol y\n"
-"bydd pob anghytundeb ar amodau'r drwydded yn cael eu datrys y tu allan i'r "
-"llys. Fel cam olaf, bydd yranghytundeb yn cael ei drosglwyddo i'r Llysoedd "
-"Barn, Paris - Ffrainc. Am unrhyw gwestiwn ynghylch yddogfen hon cysylltwch â "
-"MandrakeSoft S.A. \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Allweddell"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Dewiswch gynllun eich alweddell"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Dyma restr lawn o'r allweddellau ar gael"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Pa ddosbarth o osodiad ydych chi ei eisiau?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Gosod/Diweddaru"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Ydi hwn yn osodiad neu diweddariad?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Argymhellwyd"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Arbennigwr"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Diweddaru"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Diweddaru'r pecynnau'n unig"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Dewiswch math eich llygoden"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porth Llygoden"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Dewiswch ba borth cyfresol mae eich llygoden wedi cysylltu iddi"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Efelychiad botymau"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Efelychiad Botwm 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Efelychiad Botwm 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Ffurfweddu cardiau PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Ffurfweddu IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "dim rhaniadau ar gael"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Sganio rhaniadau i ganfod pwyntiau gosod"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Dewiswch y pwyntiau gosod"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Nid wyf yn medru darllen eich tabl rhaniad, mae'n rhy lygredig. :(\n"
-"Mae modd i mi fynd ymlaen i ddiystyru rhaniadau gwael (Bydd yr\n"
-" HOLL DDATA'n cael ei golli!). Yr ateb arall yw peidio gadael i\n"
-"DrakX newid y tabl rhaniad. (y gwall yw %s)\n"
-"\n"
-"Ydych chi'n cytuno i golli'r holl raniadau?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Methodd DrakX a darllen y tabl rhaniad yn gywir.\n"
-"Mae'n beryglus parhau!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nid oes lle rhydd ar gyfer yr ymlwythwr 1MB! Bydd y gosodiad yn parhau, ond "
-"i gychwyn y system bydd rhaid i chi greu rhaniad ymlwythwr yn DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ni chanfyddwyd rhaniad gwraidd i wneud diweddariad"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rhaniad Gwraidd"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Beth yw'r rhaniad gwraidd (/) ar eich system?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bydd angen i chi ail gychwyn cyn i'r newidiadau yn eich tabl rhaniad ddigwydd"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Dewiswch y rhaniadau rydych am eu fformatio"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Gwirio blociau gwallus?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Yn fformatio rhaniadau"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creu a fformatio ffeil %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Dim digon o le cyfnewid i gyflawni'r gosodiad, ychwanegwch rhagor"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Chwilio am y pecynnau sydd ar gael"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Canfod pecynnau i'w uwchraddio"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Nid oes gan eich system ddigon o le ar ôl ar gyfer gosodiad neu uwchraddiad "
-"(%d> %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Cwblhawyd (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Lleiafswm (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Argymhellwyd (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Dewiswch llwytho neu ddewis cadw pecyn ar ddisg meddal.\n"
-"Mae'r fformat yr un ar ddisgiau meddal wedi eu cynhyrchu drwy auto_install."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Llwytho o o ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Llwytho o ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Dewis pecynnau"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Rhowch ddisg meddal yn cynnwys dewis pecynnau yn y peiriant"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Cadw ar ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Mae'r maint ddewiswyd yn fwy na'r lle ar gael"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Math o osodiad"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nid ydych wedi dewis unrhyw grwpiau o becynnau.\n"
-"Dewiswch y gosodiad lleiaf rydych ei eisiau"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Gyda X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Gyda dogfennaethelfennol (argymhellir!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Gosodiad bychan iawn (yn arbennig dim urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Os yw'r holl CDau sydd yn y rhestr gennych, cliciwch Iawn.\n"
-"Os nad oes gennych un ohonynt, Cliciwch Diddymu.\n"
-"Os mae dim ond rhai CDau sydd ar goll, yna cliciwch Iawn."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom wedi ei labelu \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Paratoi'r gosodiad"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Gosod pecyn %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Ffurfweddiad ôl osod"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Mewnosodwch y disg meddal Cychwyn ddefnyddiwyd yn gyrrwr %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Rhowch y disg meddal Diweddaru Modiwlau yng ngyrrwr %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Mae'n awr yn bosibl i chi lwytho meddalwedd i lawr ar gyfer amgryptio.\n"
-"\n"
-"RHYBUDD:\n"
-"\n"
-"Oherwydd gofynion cyffredinol amrywiol yn berthynol i'r meddalwedd hyn ac "
-"yn\n"
-" cael eu gosod gan amrywiol awdurdodau cyfreithiol, dylai cwsmeriaid a/neu\n"
-" ddefnyddwyr terfynol wneud yn siwr fod y cyfreithau yn eu hawdurdod "
-"cyfreithiol\n"
-" yn caniatáu iddynt lwytho i lawr, cadw a/neu ddefnyddio'r feddalwedd.\n"
-"\n"
-"Yn ogystal, dylai cwsmeriaid a/neu ddefnyddwyr terfynol fod yn arbennig o\n"
-" ymwybodol i beidio â thorri cyfraith eu hawdurdod cyfreithiol. Petai "
-"defnyddwyr\n"
-" a/neu ddefnyddwyr terfynol yn peidio parchu darpariaeth y cyfreithiau\n"
-" gweithredadwy, yna byddant yn derbyn cosb ddifrifol.\n"
-"\n"
-"Ni fydd MandrakeSoft na'i gwneuthurwyr a/neu ddarparwyr, o dan unrhyw\n"
-" amod, fod yn gyfrifol am unrhyw ddifrod, arbennig, anuniongyrchol na\n"
-"damweiniol o gwbl (gan gynnwys, ond heb ei gyfyngu i golli elw, ymyrraeth "
-"ar\n"
-" fusnes, colli data masnachol na cholledion ariannol eraill, nag ymatebion\n"
-" terfynol a digollediad i'w dalu yn sgil penderfyniad llys) yn codi o "
-"ddefnydd,\n"
-" eiddo, neu'r unig lwytho i lawr y feddalwedd, i'r hyn y gall y cwsmer a/"
-"neu'r\n"
-" defnyddiwr terfynol gael mynediad iddo yn y pen draw wedi llofnodi'r "
-"cytundeb\n"
-" presennol.\n"
-"\n"
-"\n"
-"Am unrhyw ymholiadau yn berthnasol i'r cytundebau hyn, cysylltwch â:\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Mae'n bosibl i chi llwytho i lawr y pecynnau diweddaraf sydd wedi eu ryddhau "
-"ers i'r dosbaerthiad fod ar gael.\n"
-"\n"
-"Medrwch gael atgyweiriadau diogelwch a gwallau ond mae'n rhaid i\n"
-"chi fod wedi cysyllu â'r Rhyngrwyd i barhau.\n"
-"\n"
-"Ydych chi am osod y diweddariadau?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Cysylltu â'safle Mandrake Linux i estyn rhestr o'r drychau sydd ar gael"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dewiswch ddrych lle mae modd estyn y pecynnau"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Cysylltu â'r drych i estyn y rhestr o becynnau sydd ar gael"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Pa un yw eich parth amser?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Cloc caledwedd wedi ei osod i GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Gweinydd NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Gwasanaethwr CUPS pell"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nid oes argraffydd"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "A oes gennych gerdyn sain ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Rhedwch \"sndconfig\" wedi'r gosodiad i ffurfweddu'ch cerdyn sain"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Heb ganfod cerdyn sain. Ceisiwch \"harddrake\" wedi'r gosodiad"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Crynodeb"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Llygoden"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Cylchfa amser"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Argraffydd"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Cerdyn ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Cerdyn sain"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Cerdyn Teledu"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Ffeiliau lleol"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Gosod cyfrinair gwraidd"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Dim cyfrinair"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Mae'r cyfrinair yn rhy syml ( rhaid iddo fod o leiaf %d nod o hyd)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Dilysu"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Dilysu LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Sail dn LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Gwasanaethwr LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Dilysu LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Parth NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Gwasanaethwr NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mae disg cychwyn yn darparu ffordd o gychwyn eich system Linux heb ddibynnu\n"
-"ar lwythwr cychwyn arferol. Mae hyn yn ddefnyddiol os ydych am osod SILO ar\n"
-"eich system, neu mae system weithredu arall wedi tynny SILO, neu nad yw "
-"SILO'n\n"
-"gweithio gyda eich ffurfweddiad caledwedd chi. Mae modd defnyddio disg "
-"cychwyn\n"
-" unigol hefyd gyda delwedd achub Mandrake, gan ei gwneud yn llawer haws "
-"adfer o\n"
-" fethiannau systemig sylweddol\n"
-"\n"
-"Os hoffech greu disg cychwyn ar gyfer eich system, rhowch ddisg meddal yn y "
-"gyrrwr\n"
-" cyntaf a chliciwch \"Iawn\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Gyrrwr disg meddal cyntaf"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Ail ddisg meddal"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Hepgor"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mae'r disg cychwyn addasu yn cynnig ffordd i gychwyn eich system Linux heb\n"
-"ddibynnu ar eich cychwynnwr arferol. Mae hyn yn ddefnyddiol os nad ydych am\n"
-"osod LILO (neu grub) ar eich system, neu bod system weithredu arall yn "
-"dileu\n"
-"LILO, neu nad yw LILO'n gweithio gyda'ch ffurfweddiad caledwedd.\n"
-"Mae modd defnyddio disg cychwyn addasu hefyd gyda delwedd achub Mandrake,\n"
-"gan ei gwneud yn lawer haws adfer methiannau system sylweddol. Hoffech chi\n"
-"greu disg cychwyn ar gyfer eich system?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(RHYBUDD! Rydych yn defnyddio XFS ar gyfer eich rhaniad gwraidd,\n"
-"bydd creu disg cychwyn ar ddisg meddal 1.44Mb'n debygol o fethu,\n"
-"oherwydd mae XFS yn gofyn am yrrwr mawr iawn)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Nid oes gyrrwr disg meddal ar gael"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Dewiswch y gyrrwr disg meddal i'w ddefnyddio i greu disg cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Rhowch ddisg meddal yn %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creu disg cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Paratoi llwythwr cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Mae'n ymddangos fod gennychbeiriant OldWorld\n"
-"neu Anhysbys ac ni fydd llwythwr cychwyn yaboot\n"
-"yn gweithio ar eich cyfer\n"
-"Bydd y gosodiad yn parhau ond bydd\n"
-"rhaid defnyddio BootX i gychwyn\n"
-"eich peiriant."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Ydych chi eisiau defnyddio aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gwall gosod aboot, \n"
-"ceisiwch orfodi gosodiad hyd yn oed os yw hynny'n dinistrio'r rhaniad cyntaf?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Gosod llwythwr cychwyn"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Methodd gosod llwythwr cychwyn. Digwyddodd y gwall canlynol:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Efallai bydd angen i chi newid eich dyfais cychwyn Open Firmware\n"
-"i alluogi'r llwythwr cychwyn. Os nad ydych yn gweld anogwr y llwythwr\n"
-"cychwyn wrth ail gychwyn, gwasgwch Command-Option-O-F wrth ail\n"
-"gychwyn a theipiwch: setenv boot-device %s,\\\\:tbxi\n"
-"\n"
-" Yna teipiwch: shut-down\n"
-"Wrth gychwyn eto dylech weld anogwr y llwythwr cychwyn."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Rhowch ddisg meddal yng ngyrrwr %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nid yw rhai camau wedi eu cwblhau.\n"
-"\n"
-"Ydych chi wir eisiau gorffen?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Llongyfarchiadau, mae'r gosodiad wedi ei gwblhau.\n"
-"Tynnwch y cyfrwng cychwyn a gwasgu Return i ail gychwyn.\n"
-"\n"
-"\n"
-"Am wybodaeth am gywiriadau sydd ar gael ar gyfer y rhyddhad hwn o Mandrake\n"
-"Linux, cysylltwch a'r atodiad, sydd i'w gael yn:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Mae gwybodaeth ar ffurfweddu eich system ar gael ym mhenawdau ôl osod\n"
-"yr Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Mae modd awtomeiddio'r awto gosod, os hoffech\n"
-"chi, yn yr achos hwnnw bydd yn cymryd drosod y\n"
-"disg caled!!\n"
-"(mae hyn ar gyfer gosod ar flwch arall).\n"
-"\n"
-"Efallai byddai'n well gennych ai osod y gosodiad.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Awtomeiddwyd"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ail chwarae"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Cadw'r dewis becynnau"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Gosodiad %s Mandraks Linux"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> rhwng elfennau | <Space> yn dewis | <F12> y sgrin nesaf "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ar goll"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper ar goll"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Dewis ffeil"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Uwch"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Elfennol"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Arhoswch"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Gwybodaeth"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Estyn y goeden"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Cau'r goeden"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Newid rhwng gwastad a'r grwp wedi ei ddidoli"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Dewis gwael, ceisiwch eto\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Eich dewis? (rhagosodedig %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Gwybodaeth i'w gyflawyno:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Eich dewis? (0/1, rhagosodedig %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Botwm '%s'.%s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Ydych chi eisiau clicio ar y botwm hwn?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Eich dewis? (rhagosodedig `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Mae yna lawer i ddewis o (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Dewiswch y rhif cyntaf o'r amrediad 10 rydych am ei olygu,\n"
-"neu wasgwch Enter i barhau.\n"
-"Eich dewis?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=>Hysbysiad, mae label wedi newid:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Ail-gyflwyno"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tsiec (QWERTY)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Almaeneg"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spaenaidd"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Ffinaidd"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ffrengig"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norwyaidd"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pwylaidd"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rwsiaidd"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Swedaidd"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Bysellfwrdd DG"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Bysellfwrdd UDA"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albaniaidd"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenaidd (hen)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenaidd (teipiadur)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenaidd (ffonetig)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjan (lladin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgaidd"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bwlgaraidd (ffonetig)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bwlgaraidd (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilaidd (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusaidd"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Swisaidd (gosodiad Almaenig)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Swisaidd (gosodiad Ffrengig)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tsiec (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Almaenaidd (dim bysellau marw)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danaidd"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (UDA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwyaidd)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Swedaidd)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonaidd"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgaidd (gosodiad \"Rwsiaidd\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgaidd (gosodiad \"Lladinaidd\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Groegaidd"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hwngaraidd"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croataidd"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelaidd"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelaidd (Ffonetig)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranaidd"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Eislandaidd"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Eidalaidd"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Siapaëaidd 106 bysell"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Bysellfwrdd Coreaidd"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Lladin America"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuenaidd AZERTY (hen)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuenaidd AZERTY (newydd)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lithuenaidd \"rhes rhif\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuenaidd \"ffonetig\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latfiaidd"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonaidd"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Isalmaenaidd"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portiwgalaidd"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romanaidd (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romanaidd (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rwsiaidd (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slfenaidd"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slofacaidd (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovacaidd (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbaidd (cyrilig)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Bysellfwrdd Thai"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Bysellfwrdd Tajig"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Twrcaidd (model traddodiadol \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Twrcaidd (model modern \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Wcranaidd"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Bysellfwrdd UDA (rhyngwladol)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Fietnamëaidd \"rhes rhifol\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Iwgoslafaidd (lladin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Bysell Alt dde"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Y ddwy fysell Shift gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Bysellau Control a Shift gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Bysell CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Bysellau Ctrl ac Alt gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Bysellau Alt a Shift gyda'i gilydd"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Bysell \"Dewislen\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Bysell \"Windows\" chwith"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Bysell \"Windows\" de"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Gosodiadau cylch %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Tynnu'r cyfrolau rhesymegol yn gyntaf\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Nid oes cefnodgaeth PCIMA yn bodoli bellach ar gyfer cnewyllyn 2.2. "
-"Defnyddiwch cnewyllyn 2.4"
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Llygoden - Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Llygoden Olwyn PS Generig"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botwm"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Llygoden 2 Fotwm Generig"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generig"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Olwyn"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "cyfresol"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Llygoden 3 Botwm Generig"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Systemau Llygoden"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Llygoden Logitech (cyfresol, hen fath C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 fotwm"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botwm"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "dim"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Dim llygoden"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Profwch y llygoden"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "I ysgogi'r llygoden,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "SYMUDWCH YR OLWYN!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Gorffen"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Nesaf ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Cynt"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ydi hyn yn gywir?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Cysylltu â'r We"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Y ffordd mwyaf cyffredin i gysylltu â adsl yw pppoe\n"
-"Mae rhai cysylltiadau'n defnyddio pptp, a rhai dhcp.\n"
-"Os nad ydych yn gwybod pa un, dewiswch pppoe."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "usb Alcatel Speedtouch"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "defnyddiwch dhccp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "defnyddiwch pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "defnyddiwch pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Pa gleient dhcp ydych chi eisiau ei ddefnyddio?\n"
-"dhcpcd yw'r rhagosodedig"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system.\n"
-"Nid wyf yn medru gosod y math yma o gysylltiad."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Dewiswch rhag wyneb y rhwydwaith"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Dewiswch pa addaswr rhwydwaith hoffech ei ddefnyddio i gysylltu â'r Rhyngrwyd"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "heb ganfod cerdyn rhwydwaith"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Ffurfweddu'r rhwydwaith"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Rhowch eich enw gwesteiwr os ydych yn gwybod\n"
-"beth ydyw Mae rhai gwasanaethwyr angen gwybod\n"
-"yr enw gwesteiwr i weithio. Dylai eich enw gwesteiwr\n"
-"fod yn enw cymhwysol llawn megis \"fymlwch.fynesg.fyco.com\""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Enw gwesteiwr"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Dewin Ffurfweddu'r Rhwydwaith"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem IDSN Allanol"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Cerdyn ISDN mewnol"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Pa fath o gysylltiad IDSN?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Pa ffurfweddiad IDSN sy'n well gennych?\n"
-"\n"
-"* Mae'r Hen ffurfweddiad yn defnyddio isdn4net. Mae'n\n"
-" cynnwys offer pwerus ond mae'n anodd ei ffurfweddi ac nid\n"
-"yw'n safonol. \n"
-"\n"
-" *Mae'r ffurfweddiad Newydd yn haws i'w ddeall, yn fwy safonol\n"
-" ond mae ganddo llai o offer.\n"
-"\n"
-"Rydym yn argymell y ffurfweddiad ysgafn.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ffurfweddiad newydd (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Hen ffurfweddiad (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Ffurfweddiad ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Dewiswch eich darparwr.\n"
-"Os nad yw ar eich rhestr, dewiswch Heb ei Restri"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocol Ewrop"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocol Ewrop (EDSSI)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocol ar gyfer gweddill y byd"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocol ar gyfer gweddill y byd\n"
-" dim D-Channel (llinell les)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Pa brotocol ydych chi eisiau ei ddefnyddio?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Pa fath o gerdyn sydd gennych?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Dim syniad"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Os oes gennych gerdyn, dylai'r gwerthoedd ar y sgrin nesaf fod yn gywir.\n"
-"\n"
-"Os oes gennych gerdyn PCMCIA, rhaid i chi wybod irq ac io eich cerdyn.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Peidio"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Parhau"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Pa un yw eich cerdyn IDSN?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Rwyf wedi canfod cerdyn IDSN, ond nid wyf yn gwybod pa fath. Dewiswch un "
-"cerdyn PCI ar y sgrin nesaf."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heb ganfod cerdyn PCI ISDN. Dewiswch un o'r sgrin nesaf."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dewiswch ba borth cyfresol mae eich modem wedi cysylltu iddo."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Dewisiadau cyswllt ffôn"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Enw'r cysylltiad"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Rhif ffôn"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Dynodiad Mewngofnodi"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Seiliedig ar sgript"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Seiliedig ar derfynnell"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Enw parth"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Gwasanaethwr DNS Cyntaf (dewisol)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Ail Wasanaethwr DNS (dewisol)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Medrwch ddatgysylltu neu ailffurfweddu eich cyswllt"
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Medrwch ailffurfweddu eich cysylltiad"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Rydych wedi eich cysylltu â'r rhyngrwyd."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Medrwch gysylltu â'r Rhyngrwyd neu ailffurfweddu eich cyswllt"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Nid ydych wedi eich cysylltu â'r rhyngrwyd."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Cysylltu"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Dadgysylltu"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Ffurfweddu'r gysylltiad"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Cysylltiad â'r rhyngrwyd a'i ffurfweddiad "
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Rydym am ffurfweddu cysylltiad %s"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Rydym yn awr yn mynd i ffurfweddu cysylltiad %s.\n"
-"\n"
-"\n"
-"Pwyswch Iawn i barhau."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Ffurfweddiad y Rhwydwaith"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Am eich bod yn gosod eich rhwydwaith, mae eich rhwydwaith eisoes wedi ei "
-"ffurfweddu\n"
-"Cliciwch Iawn i gadw eich ffurfweddiad, neu ddileu i ail ffurfweddi eich "
-"cysylltiad Rhyngrwyd a Rhwydwaith.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Croeso i Ddewin Ffurfweddu'r Rhwydwaith\n"
-"\n"
-"Rydym ar fin ffurfweddi eich cysylltiad rhyngrwyd/rhwydwaith.\n"
-"Os nad ydych am ddefnyddio awto ganfod, dad-diciwch y blwch dewis.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Dewiswch broffil i'w ffurfweddu"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Defnyddio awto ganfod"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Canfod dyfeisiadau..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Cysylltiad modem arferol"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "canfyddwyd ar borth %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Cysylltiad ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "canfyddwyd %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Cysylltiad ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "canfyddwyd ar rhyngwyneb %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Cysylltiad cebl"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "canfyddwyd cysylltiad cebl"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "cysylltiad LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "cerdyn ethernet wedi ei ganfod"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Dewiiwch y math o gysylltiad rydych am ei ffurfweddu"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Rydych wedi ffurfweddu nifer o ffyrdd i gysylltu â'r Rhyngrwyd.\n"
-"Dewiswch ba un rydych am ei ddefnyddio.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Cysylltiad â'r Rhyngrwyd"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Ydych chi eisiau agor y cysylltiad wrth gychwyn y cyfrifiadur?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Ffurfweddiad y rhwydwaith"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Rhaid ail gychwyn y rhwydwaith"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Digwyddodd gwall wrth ail gychwyn y rhwydwaith:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Llongyfarchiadau, mae ffurfweddiad y rhwydwaith a'r Rhyngrwyd wedi gorffen\n"
-"Bydd y ffurfweddiad yn cael ei osod ar eich system\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Wedi i hyn gael ei wneud rydym yn argymell eich bod yn a'i gychwyn "
-"amgylchedd X i osgoi unrhyw anawsterau'n perthyn i enwau gwesteiwr.\n"
-"."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Digwyddod anhawsterau yn ystod y ffurfweddiad.\n"
-"Profwch eich cysylltiad drwy net_monitor neu mcc. Os nad yw eich cysylltiad "
-"yn gweithio, efallai y byddwch eisiau ailgychwyn y ffurfweddiad"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"Rhybudd!! Cafodd y ddyfais hon ei ffurfweddu o'r blaen i gysylltu â'r "
-"Rhyngrwyd.\n"
-"Derbyniwch y cynnig i gadw'r ddyfais wedi ei ffurfweddi.\n"
-"Bydd newid y meysydd islaw'n newid y ffurfweddiad."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Rhowch ffurfweddiad IP ar gyfer y peiriant hwn\n"
-"Dylai pob eitem ei roi fel cyfeiriad IP nodiant collnod degymol\n"
-"(e.e.1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ffurfweddu dyfais rhwydwaith %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (gyrrwr %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Cyfeiriad IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP awtomatig"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "dylai cyfeiriad IP fod mewn fformat 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Rhowch eich enw gwesteiwr.\n"
-"Dylai eich enw gwesteiwr fod yn enw gwesteiwr llawn gymwys.\n"
-"megis \"fymlwch.fynesg.fyngho.com\".\n"
-"Medrwch hefyd gynnig eich cyfeiriad IP os oes gennych un"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Gwasanaethwr DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Mynedfa (e.e. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dyfais mynedfa"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Ffurfweddiad dirprwyon"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Dirprwy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Dirprwy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Dilynnwch cyfernod cerdyn rhwydwaith (defnyddiol ar gyfer gliniadur)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Dylai dirprwyon fod yn gyfanrif!"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Dylai rhif porth fod yn ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Ffurfweddiad rhyngrwyd"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Hoffech chi gysylltu â'r Rhyngrwyd nawr?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Profi eich cysylltiad..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Mae'r system wedi cysylltu â'r Rhyngrwyd."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Am resymau diogelwch, bydd yn cael ei ddatgysylltu."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Nid yw'n ymddangos i'ch system gysylltu â'r rhyngrwyd.\n"
-"Ailffurfweddwch eich cysylltiad."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Ffurfweddiad y Cysylltiad"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Llanwch neu diciwch y maes islaw"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ y cerdyn"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Cof Cerdyn (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO'r Cerdyn"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_O y cerdyn"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 y cerdyn"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Eich rhif ffôn personol"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Enw darparwr (eng. darparwr.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Rhif ffôn y darparwr"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 y darparwr (dewisol)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 y darparwr (dewisol)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Dewiswch eich gwlad"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modd deialu"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Cyflymder y cysylltiad"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Oediad yn y cysylltiad (mewn eiliadau)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Mewngofnod Cyfrif (enw defnyddiwr)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Cyfrinair y Cyfrif"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "maethodd y gosodiad"
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Nid yw'r rhainad estynedig yncael ei gynnal ay y platfform hwn"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Mae gennych dwll yn nhabl eich rhaniad ond nid wyf yn medru ei ddefnyddio\n"
-"Yr unig ateb yw i symud eich rhaniadau cynradd fel bo'r twll nesaf at y "
-"rhaniadau estynedig "
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Methodd adfer o ffeil %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ffeil wrth gefn gwallus"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gwall wrth ysgrifennu i ffeil %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Mae rhywbeth gwael yn digwydd ar eich disg.\n"
-"Mae prawf i fesur ei gyfanrwydd wedi methu. \n"
-"Nid oes gwerth ysgrifennu i'r ddisg"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "rhaid cael"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "pwysig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "hyfryd iawn"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "hyfryd"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "efallai"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Argraffydd lleol"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Argraffydd pell"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Argraffydd ar wasanaethwr CUPS pell"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Argraffydd ar wasanaethwr lpd pell"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Argraffydd rhwydwaith (TCP/Soced)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Argraffydd ar wasanaethwr SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Argraffydd ar wasanaethwr NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Rhowch URI dyfais argraffydd"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Peipio'r gwaith i orchymyn"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Model anhysbys"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Argraffyddion Lleol"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Argraffyddion Pell"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " ar borth paralel \\/\"%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", argraffydd USB \\/\"%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", dyfais amlbwrpas ar borth paralel \\/\"%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", dyfais amlbwrpas ar USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dyfais amlbwrpas ar HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ",dyfais amlbwrpas"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", argraffu i %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr LPD \"%s\", argraffydd \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", gwesteiwr TCP/IP \"%s\", porth %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "ar wasanaethwr Windows \"%s\", rhannu \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "ar wasanaethwr Novell \"%s\", argraffydd \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", defnyddio gorchymyn %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Argraffydd crai (dim gyrrwr)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(ar %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(ar y peiriant hwn)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ar wasanaethwr CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr "(Rhagosodedig)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Dewiswch Gysylltiad Argraffydd"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Sut mae'r argraffydd wedi ei gysylltu?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Nid oes angen ffurfweddu argraffyddion ar wasanaethwyr CUPS pell: byddant yn "
-"cael eu canfod yn awtomatig."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Furfweddiad CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Enwch wasanaethwr CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Gyda gwasanaethwyr CUPS nid oes rhaid i chi ffurfweddu unrhyw argraffydd "
-"yma; mae gwasanaethwyr CUPS yn eich hysbysu'n awtomatig am eu "
-"hargraffyddion. Mae'r holl argraffyddion cyfredol sy'n hysbys i'ch peiriant "
-"yn cael eu rhestri yn adran \"Argraffyddyddion Pell\" prif ffenestr "
-"Printerdrake. Pan nad yw eich gwasanaethwr CUPS yn eich rhwydwaith lleol, "
-"rhaid rhoi i'r gwasanaethwr CUPS gyfeiriad IP ac yn ddewisol rhif y porth i "
-"dderbyn gwybodaeth am yr argraffydd gan y gwasanaethwr, neu gadewch y "
-"meysydd yn wag."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Fel rheol, mae CUPS yn cael ei ffurfweddu'n awtomatig yn ôl amgylchedd eich "
-"rhwydwaith, fel bo modd i chi gael mynediad at yr argraffyddion ar "
-"wasanaethwr CUPS yn eich rhwydwaith lleol. Os nad yw hyn yn gweithio'n iawn, "
-"diffoddwch \"Ffurfweddiad CUPS awtomatig\" a golygwch eich ffeil /etc/cups/"
-"cupsd.conf gyda llaw. Peidiwch anghofio ailgychwyn CUPS eto (gorchymyn: "
-"\"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Dylai cyfeiriad IP edrych fel 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Dylai rhif porth fod yn gyfanrif!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP gwasanaethwr CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porth"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Furfweddiad CUPS Awtomatig"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Canfod dyfeisiadau..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Profwch y pyrth"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Ychwanegu argraffydd newydd"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-" Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Mae'r dewin yn caniatáu i chi osod argraffyddion lleol neu bell i'w "
-"defnyddio o'r peiriant hwn a hefyd gan argraffyddion eraill ar eich "
-"rhwydwaith.\n"
-"\n"
-"Bydd yn gofyn am yr holl wybodaeth angenrheidiol i osod yr argraffydd a bydd "
-"yn rhoi mynediad i'r holl yrwyr argraffyddion sydd ar gael, dewisiadau "
-"gyrwyr a mathau o gysylltiadau argraffyddion."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Argraffydd Lleol"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Croeso i Ddewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod eich argraffydd(ion) sy'n "
-"gysylltiedig â'r cyfrifiadur hwn.\n"
-"Cysylltwch yr argraffydd(ion) i'r cyfrifiadur a'i(u) troi mlaen. Cliciwch "
-"\"Nesaf\" pan rydych yn barod, ac ar \"Diddymu\"pan nad ydych am osod eich "
-"argraffydd(ion) ar hyn o bryd.\n"
-"\n"
-"Sylwch fod rhai cyfrifiaduron yn medru methu yn ystod awto ganfod "
-"argraffydd, diffoddwch \"Awto ganfod argraffyddion\" i osod argraffydd heb "
-"awto ganfod. Defnyddiwch \"Modd Arbenigwr\" printdrake pan fyddwch am osod "
-"argraffydd pell os nad yw printerdrake yn ei restri'n awtomatig."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Awto ganfod argraffyddion"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Llongyfarchiadau, mae eich argraffydd wedi ei osod a'i ffurfweddu!\n"
-"\n"
-"Os ydych am ychwanegu, tynnu neu ailenwi argraffydd, neu os ydych am newid y "
-"gosodiadau dewis rhagosodedig (mewnflwch papur, ansawdd y printiad,...0, "
-"dewiswch \"Argraffydd\" yn adran \"Caledwedd\" Canolfan Rheoli Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Awto ganfod Argraffyddion"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Mae Printerdrake yn medru awto ganfod eich argraffyddion paralel ac USB "
-"lleol, ond sylwch fod awto ganfod yn MEDRU RHEWI EICH SYSTEM AC ARWAIN AT "
-"SYSTEMAU FFEIL LLWGR! Gwnewch hyn AR EICH MENTER EICH HUN!\n"
-"\n"
-"Ydych eisiau i'ch argraffydd gael ei awto ganfod?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Defnyddio awto ganfod"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Gosod argraffydd gyda llaw"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Canfyddwyd %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Argraffydd ar borth paralel \\/\"%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Argraffydd USB \\/\"%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Heb ganfod argraffydd lleol! I osod argraffydd gyda llaw, rhowch enw'r "
-"ddyfais /enw ffeil ar y llinell mewnbwn (Porth Paralel: /dev/lp0, /"
-"dev/,...., cyfatebol i LPT1:, LPT2,..., argraffydd USB 1af: /dev/usb/lp0, "
-"ail argraffydd USB: /dev/usb/lp1,...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Rhaid cynnig enw dyfais neu ffeil!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Heb ganfood argraffydd lleol!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Dim ond ar ôl cwblhau'r gosodiad mae modd gosod argraffyddion rhwydwaith. "
-"Dewiswch \"Caledwedd\" ac yna \"Argraffydd\" yng Nghanolfan Rheoli Mandrake"
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"I osod argraffyddion rhwydwaith, cliciwch \"Diddymu\", trowch i \"Modd "
-"Arbenigwr\", clicio \"Ychwanegu argraffydd newydd\" eto."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Cafodd yr argraffydd canlynol ei awto ganfod, os nad hwn yw'r un rydych am "
-"ei ffurfweddu, rhowch enw dyfais/enw ffeil ar y llinell mewnbwn."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Dyma restr o'r holl argraffyddion gafodd eu awto ganfod. Dewiswch yr "
-"argraffydd rydych am ei osod neu rhowch enw dyfais/ffeil yn y llinell "
-"mewnbwn."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Cafodd yr argraffydd hwn ei awto ganfod. Bydd ffurfweddi'r argraffydd yn "
-"digwydd yn awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu "
-"byddai'n well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
-"\"Ffurfweddiad gyda Llaw\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Dyma restr o'r holl argraffyddion gafodd eu awto ganfod. Dewiswch yr "
-"argraffydd rydych am ei osod. Bydd ffurfweddu'r argraffydd yn digwydd yn "
-"awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu byddai'n "
-"well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
-"\"Ffurfweddiad gyda Llaw\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Dewiswch y porth y mae eich argraffydd wedi cysylltu iddo neurhowch enw "
-"dyfais/ffeil ar y ninell mewnbwn"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Dewiswch y porth mae'r argraffydd wedi cysylltu iddo."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Pyrth paralel: /dev/lp0, /dev/lp1, ..., yn cyfateb i LPT1:, LPT2:, ..., "
-"argraffydd USB cyntaf: /dev/usb/lp0, ail argraffydd USB : /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Rhaid dewis/rhoi argraffydd/dyfais!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Ffurfweddiad gyda llaw"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"A yw eich argraffydd yn ddyfais amlbwrpas gan HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 gyda sganiwr)"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Gosod pecynnau HPOJ"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Gwirio a ffurfweddu dyfais HPOJ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Gosod pecynnau SANE"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Sganio eich dyfais HP aml bwrpas"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Gwneud porth argraffydd ar gael ar gyfer CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Darllen cronfa ddata argraffydd..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Dewisiadau Argraffydd lpd Pell"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"I ddefnyddio argraffydd lpd pell, rhaid darparu enw gwesteiwr gwasanaethwr "
-"yr argraffydd ac enw'r argraffydd ar y gwasanaethwr hwnnw."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Enw gwesteiwr pell"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Enw'r argraffydd pell"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Mae enw'r gwesteiwr pell ar goll!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Mae enw'r argraffydd pell ar goll!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Dewisiadau Argraffydd SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"I argraffu i argraffydd SMB, rhaid darparu enw gwesteiwr SMB (Sylwer! Mi all "
-"fod yn wahanol i'w enw gwesteiwr TCP/IP!) ac o bosibl cyfeiriad IP'r "
-"gwasanaethwr argraffu, yn ogystal â'r enw rhannu ar gyfer yr argraffydd "
-"rydych am gael mynediad iddo ac unrhyw enw defnyddiwr, cyfrinair a "
-"gwybodaeth am grwp gwaith perthynol."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Gwasanaethwr gwesteiwr SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP Gwasanaethwr SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Rhannu enw"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grwp gwaith"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Rhaid rhoi un ai enw'r gwasanaethwr neu IP'r gwasanaethwr!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Mae enw rhannu Samba ar goll!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Dewisiadau Argraffydd NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"I argraffu ar argraffydd NetWare, rhaid i chi rhoi enw gwasanaethwr argraffu "
-"NetWare (Sylwer! gall fod yn wahanol i'w enw gwesteiwr TCP/IP) yn ogystal "
-"â'r rhes waith argraffu am yr argraffydd rydych am gael mynediad iddo ac "
-"unrhyw enw defnyddiwr a chyfrinair perthnasol."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Gwasanaethwr Argraffydd"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Enw Rhes Argraffu"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Mae enw gwasanaethwr NCP ar goll!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Mae enw rhes NCP ar goll"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Dewisiadau Argraffydd TCP/Soced"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"I argraffu i argraffydd TCP neu soced, rhaid i chi ddarparu enw gwesteiwr yr "
-"argraffydd ac yn ddewisol rhif y porth. Ar wasanaethwyr HP JetDirect rhif y "
-"porth, fel rheol, yw 9100, gall amrywio ar wasanaethwyr eraill. Gweler "
-"llawlyfr eich caledwedd"
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Enw'gwesteiwr yr argraffydd"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Mae enw'r gwesteiwr argraffu ar goll!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI Dyfais Argraffu"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Medrwch enwi'n benodol URI i gael mynediad i'r argraffydd. Rhaid i'r URI "
-"gyflawni manylyn un ai CUPS neu Foomatic. Sylwer nad yw pob math o URI cyn "
-"cael eu cynnal gan bob sbwlydd ."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Rhaid cynnig URI dilys!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Mae pob argraffydd angen enw (e.e. \"argraffydd\". Nid oes angen llanw "
-"meysydd Disgrifiad a Lleoliad. Lle ar gyfer sylwadau'r defnyddiwr sydd yma."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Enw'r argraffydd"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Disgrifiad"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lleoliad"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Paratoi cronfa ddata argraffydd..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Model eich argraffydd"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Mae Printerdrake wedi cymharu'r enw model yn sgil yr awto ganfod gyda'r "
-"modelau sy'n cael eu rhestri yn ei gronfa ddata i gael y cydweddiad gorau. "
-"Gall y dewis fod yn anghywir, yn arbennig os nad yw eich argraffydd yn cael "
-"ei enwi yn y gronfa ddata. Felly, edrychwch i weld â yw'r dewis yn gywir a "
-"chliciwch \"Model cywir\" os yw ac os nad yw, cliciwch \" Dewiswch y model "
-"gyda llaw\" fel bo modd i chi ddewis eich argraffydd gyda llaw ar y sgrin "
-"nesaf.\n"
-"\n"
-"Ar gyfer eich argraffydd mae Printerdrake wedi canfod\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Mae'r model yn gywir"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Dewiswch y model gyda llaw"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Dewis model yr argraffydd"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Pa fath o argraffydd sydd gennych?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Gwiriwch os yw Printerdrake wedi awto ganfod eich argraffydd yn gywir. "
-"Chwiliwch am y model cywir pan fo'r cyrchwr yn sefyll ar y model anghywir "
-"neu ar \"Argraffydd bras\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Nid yw eich argraffydd wedi ei rhestri, dewiswch un cyfatebol (gw. llawlyfr "
-"eich argraffydd) neu un tebyg."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Ffurfweddiad OKI winprinter "
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Rydych yn ffurfweddu winprinter laser OKI. Mae'r argraffydd hwn\n"
-"yn defnyddio protocol cyfathrebu arbennig. Dim ond trwy eu cysylltu â'r "
-"porth paralel cyntaf mae modd cael yr argraffydd hwn i weithio. Pan fo eich "
-"argraffydd wedi ei gysylltu i borth arall neu i flwch gwasanaethwr argraffu, "
-"cysylltwch yr argraffydd i'r porth paralel cyntaf cyn argraffu tudalen "
-"brawf. Os na wnewch chi hynny, ni fydd yr argraffydd yn gweithio. Bydd eich "
-"gosodiad ynghylch ymath o gysylltiad yn cael ei anwybyddu gan y gyrrwr."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Ffurfweddiad inkjet Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Mae'r gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark yn cynnal "
-"argraffyddion lleol, yn unig. Cysylltwch eich argraffydd i borth lleol neu "
-"ffurfweddwch ef i'r peiriant mae'n gysylltiedig ag ef."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"I fedru argraffu gyda eich argraffydd inkjet Lexmark a'r ffurfweddiad hwn, "
-"bydd angen gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark (http://"
-"www.lexmark.com/). Ewch i'w safle yn yr UDA a chliciwch ar y botwm \"Drivers"
-"\". Yna dewiswch eich model ac yna \"Linux\" fel system weithredu. Mae'r "
-"gyrwyr yn dod fel pecynnau RPM neu sgriptiau cragen gyda gosodiad graffigol "
-"rhyngweithiol. Nid oes angen i chi wneud y ffurfweddiad drwy'r wyneb "
-"graffigol. Diddymwch yn syth wedi'r cytundeb trwyddedu. Yna argraffwch "
-"dudalennau'r alinio'r pen argraffu gyda \"lexmarkmaintain\" a newid "
-"gosodiadau aliniad y pen gyda'r rhaglen."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Gosodiadau rhagosodedig yr argraffydd\n"
-"\n"
-"Dylech wneud yn siwr fod maint y dudalen a'r modd math inc/argraffu (os ar "
-"gael) a hefyd bod ffurfweddiad caledwedd argraffyddion laser (cof, uned "
-"ddeublyg, blychau papur ychwanego) wedi eu gosod yn gywir. Sylwer bod fod "
-"argraffiad ansawdd/cydraniad uchel iawn yn medru arafu'r argraffu'n "
-"sylweddol.."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Rhaid i ddewis %s fod yn gyfanrif"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Rhaid i ddewis %s fod yn rhif!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Dewis %s allan o amrediad!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ydych chi am osod argraffydd (\"%s\")\n"
-"fel yr argraffydd rhagosodedig?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Dewiswch y tudalennau prawf rydych am eu hargraffu\n"
-"Sylwer: gall y dudalen brawf llun camera gymryd cryn dipyn o amser cyn cael "
-"ei argraffu ac ar argraffydd laser heb lawer o gof mae'n bosibl na ddaw o "
-"gwbl. Yn y rhan fwyaf o achosion, mae'r prawf tudalen safonol yn ddigonol."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Dim tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Argraffu"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Tudalen prawf safonnol"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Prawf tudalen arall (Llythyr)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Prawf tudalen arall (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Tudalen prawf llun"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Peidiwch argraffu tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Argraffu tudalen(nau) prawf..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Mae tudalennau prawf wedi eu hanfon i'r argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-"Statws argraffu:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Mae tudalen(nau) prawf wedi eu hanfon at yr argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "A weithiodd hwnnw'n iawn?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Argraffydd bras"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"I argraffu ffeil o'r linell orchymyn (ffenestr derfynnell) mae modd "
-"defnyddio un ai'r gorchymyn \"%s <file>\" neu offeryn argraffu graffigol: "
-"\"xpp <file>\" neu \"kprinter <file>\". Mae'r offeryn graffigol yn caniatáu "
-"chi ddefnyddio'r argraffydd ac i newid gosodiadau dewis yn hawdd.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchmynion hyn ym maes \"Gorchmynion Argraffu\" y "
-"deialogau argraffu mewn nifer o raglenni, ond yma nid ydynt yn darparu'r "
-"enw ffeil am fod y ffeil i'r argraffydd yn cael ei ddarparu gan y rhaglen.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Mae'r gorchymyn \"%s\" hefyd yn caniatau i newid y gosodiadau dewis ar gyfer "
-"tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r llinell "
-"gorchymyn, e.e \"%s <file>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Er mwyn cael gwybodaeth am y dewisiadau sydd ar gael ar gyfer yr argraffydd "
-"cyfredol darllenwch un ai'r rhestr isod neu cliciwch ar y botwm \"Rhestr "
-"dewis argraffu\"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Dyma restr o'r dewisiadau argraffu sydd ar gael ar gyfer yr argraffydd "
-"presennol:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch "
-"orchymyn \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchymyn hwn ym maes \"Gorchymyn argraffu\" deialog "
-"nifer o raglenni. Ond peidiwch â rhoi'r enw ffeil yma oherwydd bod y ffeil "
-"i'w argraffu wedi ei ddarparu gan y rhaglen.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"I edrych ar y rhestr o'r dewisiadau sydd ar gael ar gyfer yr argraffydd "
-"cyfredol cliciwch ar fotwm \"Rhestr dewisiadau argraffu\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynnell) defnyddiwch y "
-"gorchymyn \"%s <file>\" or \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Mae modd hefyd i ddefnyddio rhag wyneb graffigol \"xpdq\" i osod dewisiadau "
-"a thrin gwaith argraffu.\n"
-"\n"
-"Os ydych yn defnyddio KDE fel amgylchedd pen bwrdd mae gennych \"botwm "
-"argyfwng\", eicon ar y pen bwrdd, wedi ei labelu \"Atal yr Argraffydd!\", "
-"fydd yn stopio 'r holl waith argraffu'n syth pan fyddwch yn ei glicio. Mae "
-"hyn yn ddefnyddiol pan fydd y papur wedi mynd yn sownd, ag ati.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Mae'r gorchmynion \"%s\" a \"%s\" hefyd yn caniatáu newid y gosodiadau dewis "
-"ar gyfer tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r "
-"llinell gorchymyn, e.e \"%s <file>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Cau"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Argraffu/Sganio ar \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Argraffu ar argraffydd \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Rhestr ddewis argraffu"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
-"sganio. Mae modd i chi sganio gyda \"scanimage\" (\"scanimage -d hp:%s\" i "
-"bennu pa un os oes gennych fwy nag un) o'r llinell orchymyn neu gyda rhag "
-"wynebau graffigol \"xscanimage\" neu \"xsane\". Os ydych yn defnyddio GIMP, "
-"medrwch sganio hefyd, drwy ddewis y man priodol yn y ddewislen \"Ffeil\"/"
-"\"Cipio\". Galwch hefyd \"man scanimage\" a \"man sane-hp\" ar y linell "
-"orchymyn i dderbyn mwy o wybodaeth.\n"
-"\n"
-"Peidiwch defnyddio \"scannerdrake\" ar gyfer y ddyfais hon."
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Mae eich dyfais aml bwrpas HP wedi cael ei ffurfweddu'n awtomatig i fedru "
-"sganio. Medrwch sganio o'r llinell orchymyn gyda \"ptal-hp %s scan ...\".. "
-"Nid yw sganio drwy gyfrwng rhyng wyneb graffigol na GIMP yn cael ei gynnal "
-"eto ar gyfer eich dyfais. Mae rhagor o wybodaeth i'w gael yn ffeil \"/usr/"
-"share/doc/hpoj-0.8/ptal-hp-scan.html\" ar eich system. Os oes gennych HP "
-"LaserJet 1100 neu 1200 yna dim ond os oes gennych y dewis sganio wedi ei "
-"osod mae modd sganio.\n"
-"Peidiwch defnyddio \"scannerdrake\" ar gyfer y ddyfais hon."
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Darllen data argraffydd..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Trosglwyddo ffurfweddiad yr argraffydd"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Mae modd i chi gopďo ffurfweddiad yr argraffydd fel wnaethoch o yspwlydd %s "
-"i %s eich yspwlydd cyfredol. Bydd yr holl ddata ffurfweddi (enw argraffydd, "
-"disgrifiad, lleoliad, math o gysylltiad a gosodiadau dewis rhagosodedig) yn "
-"cael eu trosi, ond ni fydd y gwaith argraffu'n cael eu trosi.\n"
-"Ni fydd yr holl waith argraffu'n cael eu trosi, am y rhesymau canlynol:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"Nid yw CUPS yn cefnogi argraffyddion ar wasanaethwyr Novell neu "
-"argraffyddion sy'n anfon data mewn gorchymyn ffurf -rhydd.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"Mae PDQ yn cynnal argraffyddion lleol, LDP pell, a Socket/TCP, yn unig.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Nid yw LPD na LPRng yn cynnal argraffyddion IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Yn ogystal, nid oes modd trosglwyddo rhesi grewyd gan y rhaglen hon na "
-"\"foomatic-configure\"."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Hefyd nid oes modd trosglwyddo argraffyddion ffurfweddwyd gyda ffeiliau PPD "
-"ddarparwyd gan eu gwneuthurwyr na gyrrwyr CUPS brodorol."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Nodwch yr argraffydd rydych am ei drosglwddo a chliciwch\n"
-"\"Trosglwyddo\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Peidio trosglwyddo argraffydd"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Trosglwyddo"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Mae argraffydd o'r enw \"%s\" yn bodoli eisoes yn %s.\n"
-"Cliciwch \"Trosglwyddo\" i ysgrifennu drosto.\n"
-"Mae modd i chi osod enw newydd arno neu ei hepgor."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Dylai enw'r argraffydd gynnwys llythrennau, rhifau a'r tanlinellu, yn unig"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Mae argraffydd \"%s\" yn bodoli eisoes,\n"
-"ydych chi wir eisiau ailysgrifennu ei ffurfweddiad?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Enw'r argraffydd newydd"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Trosglwyddo %s..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Rydych wedi trosglwyddo eich argraffydd rhagosodedig blaenorol rhagosodedig "
-"(\"%s\"). A ddylai fod yn argraffydd rhagosodedig y system argraffu newydd %"
-"s ?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Adnewyddu data'r argraffydd..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Ffurfweddiad argraffydd pell"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Cychwyn y rhwydwaith..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Ffurfweddwch y rhwydwaith"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Nid yw swyddogaethau'r rhwydwaith wedi ei ffurfweddu"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Ydych chi am ffurfweddi argraffydd pell. Mae hyn angen mynediad ar "
-"rwydwaith, ond nid yw eich rhwydwaith wedi ei ffurfweddu eto. Os ydych am "
-"fynd ymlaen heb ffurfweddiad rhwydwaith, ni bydd modd i chi ddefnyddio'r "
-"argraffydd rydych yn ei ffurfweddu ar hyn o bryd. Beth ydych am ei wneud?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Mynd yn eich blaen heb ffurfweddu'r rhwydwaith"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Nid oes modd cychwyn y ffurfweddiad rhwydwaith wnaed yn ystod y gosodiad. "
-"Gwiriwch p'un ai yw'r rhwydwaith yn darparu mynediad ar ôl cychwyn eich "
-"system a chywiro'r ffurfweddiad gan ddefnyddio Canolfan Rheoli Mandrake, "
-"adran \"Rhwydwaith a'r Rhyngrwyd\"/\"Cysylltiad\", ac yna gosod yr "
-"argraffydd, eto gan ddefnyddio Canolfan Rheoli Mandrake, adran \"Caledwedd\"/"
-"\"Argraffydd\""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Nid oedd mynediad i'r rhwydwaith yn rhedeg ac nid oedd modd ei gychwyn. "
-"Gwiriwch eich ffurfweddiad a'ch caledwedd. Yna ceisiwch ail ffurfweddi eich "
-"argraffydd."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Ailgychwyn system argraffu..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "uchel"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Paranoia"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Gosod system argraffu yn lefel diogelwch %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Rydych ar fin gosod system argraffu %s ar system sy'n rhedeg lefel diogelwch "
-"%s. \n"
-"\n"
-"Mae'r system yn rhedeg daemon (proses gefndirol) sy'n aros am waith argraffu "
-"ac yna yn eu trin. Mae'r daemon hefyd yn gyraeddadwy gan beiriannau pell "
-"drwy'r rhwydwaith ac felly'n bwynt ymosod. Felly, dim ond ychydig o "
-"ddaemonau sy'n cael eu cychwyn yn rhagosodedig, ar y lefel diogelwch hwn.\n"
-"\n"
-"Ydych chi wir eisiau ffurfweddu argraffu ar y peiriant hwn?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Cychwyn y system argraffu wrth gychwyn y cyfrifiadur"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Ni fydd system argraffu (%s) yn cychwyn yn awtomatig pan fydd y peiriant yn "
-"cael ei gychwyn.\n"
-"\n"
-"Mae'n bosibl fod y cychwyn awtomatig wedi ei ddiffodd wrth newid i lefel "
-"diogelwch uwch, am fod a system argraffu'n bwynt tebygol ar gyfer "
-"ymosodiadau.\n"
-"\n"
-"Ydych chi am i'r cychwyn awtomatig gael ei droi ymlaen eto?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Gwirio'r meddalwedd sydd wedi ei osod..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Tynnu LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Tynnu LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Dewiswch Sbwlydd Argraffydd"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Pa system argraffu(sbwlydd) ydych chi am ei ddefnyddio?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Ffurfweddu argraffydd \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Gosod Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Dewisiadau argraffydd"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Paratoi PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Ffurfweddi'u rhaglenni"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Hoffech chi ffurfweddu argraffu?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "System argraffu."
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Mae'r argraffyddion canlynol wedi eu ffurfweddu. Cliciwch ar un i newid ei "
-"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth "
-"amdano; neu i wneud argraffydd CUPS pell ar gael ar gyfer Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Mae'r argraffyddion canlynol wedi eu ffurfweddi. Cliciwch ar un i newid ei "
-"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth amdano."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Adnewyddu rhestr argraffyddion (dangos pob argraffydd CUPS pell sydd ar gael)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Newidiwch y system argraffu"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modd Arferol"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Ydych chi eisiau ffurfwedu argraffydd arall?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Newid ffurfweddiad yr argraffydd"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Argraffydd %s\n"
-"Beth ydych am ei newid ar yr argraffydd hwn?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Gwna!!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Math o gyswllt argraffydd"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Enw'r argraffydd, disgrifiad, lleoliad"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Gwneuthurwr yr argraffydd, model, gyrrwr"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Gwneuthurwr yr argraffydd, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Gosod yr argraffydd fel y rhagosodedig"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Ychwanegwchyr argraffydd hwn i Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Tynnwch yr argraffydd hwn o Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Argraffu tudalennau prawf"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Gwybod sut i ddefnyddio'r argraffydd"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Tynnu argraffydd"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Tynnu hen argraffydd \"%s\"..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Argraffydd rhagosodedig"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Mae argraffydd \"%s\" wedi ei osod fel yr argraffydd rhagosodedig."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Ychwanegu argraffydd i Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"Mae argraffydd \"%s\" wedi ei ychwanegu'n llwyddiannus i Star Office/"
-"OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Wedi methu ag ychwanegu argraffydd \"%s\" i Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Tynnu'r argraffydd o Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"Cafodd argraffydd \"%s\" ei dynnu'n llwyddiannus o Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Methwyd â thynnu argraffydd \"%s\" o Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ydych chi wir eisiau tynnu argraffydd \"%s\""
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Tynnu argraffydd \"%s\"..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Ffurfweddu dirprwy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Croeso i'r gwasanaeth ffurfweddu 'r dirprwy.\n"
-"\n"
-"Yma bydd modd i chi osod eich dirprwyon http a ftp gyda\n"
-"neu heb mewngofnod a chyfrinair\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Rhowch y wybodaethar gyfer dirprwyo http\n"
-"Gadewch hwn yn wag os nad ydych eisiau dirprwy http"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porth"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Dylai'r URL ddechrau gyda \"http:\""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Dylai'r rhan porth fod yn rhifol"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Llanwxh y gwybodaeth dirprwy ftp\n"
-"Gadewch yn wag os nad ydych eisiau dirprwy ftp"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Dylai'r URL ddechrau gyda 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Rhowch mewngofnod a chyfrinair dirprwyol, os oes angen.\n"
-"Gadwech yn wag os nad ydych am gael mewngofnod a chyfrinair"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "mewngofnodi"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "cyfrinair"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "aildeipiwch y gyfrinair"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Nid yw'r cyfrineiriau'n cydweddi. Rhowch gynnig arall arni!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Methu ychwanegu rhaniad to_formatted_RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Methu ysgrifenu ffeil %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "methodd mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "methodd mkraid (efallai bod raidtools ar goll)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Dim digon o raniadau ar gyfer RAID lefel %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Cychwynnwch system sain ALSA (Pensaernďaeth Sain Linux Uwch)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron trefnydd gorchymyn cyfnodol"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Mae apmd yn cael ei ddefnyddio i fonitro statws y batri a \n"
-"mewngofnodi drwy syslog. Mae modd ei ddefnyddio i gau'r \n"
-"peiriant pan mae'r batri'n isel."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Mae'n rhedeg gorchmynion wedi eu trefnu gan y gorchymyn at ar amser wedi \n"
-"ei bennu pan oedd at yn rhedeg, gan rhedeg gorchmynion swp pan fydd \n"
-"cyfartaledd y llwyth yn ddigon isel."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Mae cron yn rhaglen safonnol yn UNIX sy'n rhedeg rhaglenni sydd wedi eu \n"
-"pennu gan y defnyddiwr ar adegau penodol. Mae vixie cron yn ychwanegu \n"
-"nifer o ychwanegiadau i'r UNIX cron sylfaenol, yn cynnwys gwell diogelwch \n"
-"a dewisiadau ffurfweddu mwy pwerus."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Mae GPM yn ychwanegu cefnogaeth ar gyfer llygoden i raglenni testun Linux \n"
-"megis, Midnight Commander. Mae hefyd yn caniatáu gweithrediadau torri a \n"
-"gludo consol llygoden, gan gynnwys cefnogaeth ar gyfer bryslenni yn y "
-"consol. "
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Mae HardDrake yn rhedeg archwiliwr caledwedd, a gall yn ôl \n"
-"eich dewis, ffurfweddu caledwedd newydd neu sydd wedi newid."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Mae Apache yn wasanaethwr y We Fyd Eang. Mae'n cael ei ddefnyddio "
-"iwasanaethu ffeiliau HTML a CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Mae daemon uwchwasanaethwr rhyngrwyd (inetd) yn cychwyn nifer\n"
-"o wasanaethau rhyngrwyd eraill, yn ôl y galw. Mae'n gyfrifol am gychwyn\n"
-"nifer o wasanaethau, gan gynnwys telnet, ftp, rsh a rlogin. Mae analluogi \n"
-"inetd yn analluogi'r holl wasanaethau mae'n gyfrifol amdanynt."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Cychwyn hidlydd pecynnau ar gyfer cnewyllyn cyfres Linux 2.2 \n"
-"i greu mur gwarchod i amddiffyn eich peiriant rhag ymosodiadau \n"
-"o'r rhwydwaith."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Mae'r pecyn hwn yn llwytho'r map bysellfwrdd rydych wedi \n"
-"ei ddewis fel yn /etc/sysconfig/keyboard. Mae modd dewis \n"
-"hwn wrth ddefnyddio'r rhaglen wasanaethu kbdconfig. \n"
-"Dylech adael hwn wedi ei alluogi ar gyfer y rhanfwyaf o beiriannau."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Ailgreu awtomatic pennawd y cnewyllyn yn /boot ar\n"
-"gyfer /usr/include/linux{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Canfod a ffurfweddu awtomatic caledwedd wrth gychwyn y cyfrifiadur."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "Bydd Linuxconf yn trefnu ar adegau i gyflawnu amrywiol"
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Mae lpd yn ddaemon argraffu sy'n angenrheidiol i lpr weithio\n"
-"Mae'n wasanaethwr sy'n cyflafareddu gwaith argraffu i\n"
-"argraffydd (ion)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Mae Gwasanaethwr Rhith Linux yn cael ei ddefnyddio i adeiladu \n"
-"gwasanaethwyr cyflym a chyraeddadwy."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"mae'r enwyd (BIND) yn Wasanaethwr Enw Parth (DNS) sy'n cael ei ddefnyddio i "
-"gydrannu enwau gwestai i'r cyfeiriadau IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Yn gosod a dadosod pob System Ffeil y Rhwydwaith (NFS), SMB\n"
-"(Rheolwr Rhwydwaith/Windows), a phwyntiau gosod NCP (NetWare) ."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Cychwyn/Gorffen pob rhyngwyneb rhwydwaith sydd wedi eu \n"
-"ffurfweddu i gychwyn wrth gychwyn y peiriant."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau ar draws "
-"rhwydweithiau TCP/IP.\n"
-"Mae'r gwasanaeth yn darparu ffwythiannaeth gwasanaethwr NFS, sy;n cael ei "
-"ffurfweddu\n"
-"drwy'r ffeil /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau \n"
-"ar draws rhwydweithiau TCP/IP. Mae'r gwasanaeth hwn \n"
-"yn darparu'r gallu i gloi ffeiliau NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Cychwyn clo allweddell numlock yn awtomatig yn consol \n"
-"ac XFree wrth gychwyn y peiriant."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Cynnal OKI 4w ac argraffyddion windows cyffelyb."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Mae cynhaliaeth PCMICA fel rheol ar gyfer cynnal pethau fel \n"
-"ethernet a modem mewn gliniadur. Ni fydd yn cychwyn heb ei \n"
-"ffurfweddu i wneud hynny, felly mae'n ddiogel ei gael ar beiriannau \n"
-"sydd ddim ei angen."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mae'r mapiwr porth (portmapper) yn rheoli cysylltiadau RPC, \n"
-"sy'n cael eu defnyddio gan brotocolau fel NFS a NIS. Rhaid i wasanaethwr "
-"porthmap\n"
-"redeg ar beiriannau sy'n gweithredu fel gwasanaethwyr ar gyfer protocolau "
-"sy'n\n"
-"gwneud defnydd o fecanwaith RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Mae Postfix yn Asiant Cludo E-bost (MTA), sef rhaglen sy'nsymud e-bost o un "
-"peiriant i'r llall."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Bydd yn cadw ac adfer system pwll entropi ar gyfer cynhyrchu rhif \n"
-"hap o ansawdd uchel."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr "Dynodi dyfeisiadau"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Mae'r daemon llwybrydd yn caniatáu i'r tabl llwybrydd IP awtomatig \n"
-"ddiweddaru drwy gyfrwng y protocol RIP. Tra bo RIP'n cael ei \n"
-"ddefnyddio'n eang ar rhwydweithiau bach, mae angen protocolau \n"
-"llwybrydd mwy cymleth ar gyfer rhwydweithiwu cymleth."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Mae'r protocol rstat yn caniatáu i ddefnyddwyr rhwydwaith \n"
-"i adennill metric perfformaid unrhyw beiriant ar y rhwydwaith."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Mae protocol ruser yn caniatáu i ddefnyddwyr ar rwydwaith i adnabod\n"
-"pwy arall sydd wedi mewngofnodi ar beirianau eraill sy'n ymateb."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Mae'r protocol rwho'n caniatáu i ddefnyddwyr pell gael rhestr o'r \n"
-"holl ddefnyddwyr sydd wedi mewngofnodi ar beiriant sy'n rhedeg \n"
-"daemon rwho (yn debyg i fysedd)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Cychwyn y system sain ar eich peiriant"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog yw'r modd mae llawer o daemonau'n defnyddio i gofnodi \n"
-"negeseuon i ffeiliau cofnod systemau. mae'n syniad da io rhedeg \n"
-"syslog bob tro."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Llwytho'r gyrrwyr ar gyfer eich dyfeisiau usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Yn cychwyn Gwasanaethwr Ffont X (mae hyn yn orfodol i XFree i redeg).."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Dewiswch pa wasanaethau ddylai gael eu cychwyn yn awtomatig wrth gychwyn y "
-"cyfrifiadur"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Argraffu"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Rhyngrwyd"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Rhannu Ffeiliau"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Gweinyddu Pell"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Gwasanaethwr Cronfa Ddata"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Gwasanaethau: %d wedi eu cychwyn ar gyfer %d wedi eu cofrestri"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Gwasanaethau"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "rhedeg"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ataliwyd"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Gwasanaethau a daemonau"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Dim gwybodaeth ychwanegol am y gwasanaeth hwn."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Cychwyn"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Cychwyn"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Aros"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Diolch am ddewis Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Croeso i fyd Cod Agored"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Mae llwyddiant MandrakeSoft yn seiliedig ar egwyddor Meddalwedd Rhydd. Mae "
-"eich system weithredu newydd yn ganlyniad gwaith cydweithredol ar ran y "
-"Gymuned Linux byd-eang"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Ymunwch â byd Meddalwedd Rhydd"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Dewch i adnabod y gymuned Cod Agored a dewch yn aelod. Dysgwch, addysgwch a "
-"chynorthwywch eraill drwy ymuno yn y grwpiau trafod niferus sydd i'w cael yn "
-"ein tudalennau gwe \"Cymuned\""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Y Rhygnrwyd a Negesu"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mae Mandrake Linux 8.2 yn cynnig y feddalwedd orau i gael mynediad i bopeth "
-"sydd gan y Rhyngrwyd i'w gynnig. Syrffiwch y we a gwyliwch animeddiadau gyda "
-"Mozilla a Konqueror, cyfnewidiwch e-bost a threfnu eich gwybodaeth gyda "
-"Evolution a Kmail, a llawr iawn rhagor. "
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Amlgyfrwng a Graffigau"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mae Mandrake Linux 8.2 yn caniatáu i chi wthio eich cyfrifiadur aml-gyfrwng "
-"i'r eithaf! Defnyddiwch y feddalwedd ddiweddaraf i chwarae ffeiliau "
-"cerddoriaeth a sain, golygu a threfnu eich delweddau a lluniau, gwylio "
-"teledu a fideo, a llawer iawn mwy"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Datblygiad"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 yw'r platfform datblygu gorau. Darganfyddwch rym grynhowr "
-"gcc GNU yn ogystal ag amgylcheddau datblygiadol Cod Agored gorau oll"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Canolfan Rheoli Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Canolfan Rheoli Mandrake Linux 8.2 yw'r lleoliad canolog ar gyfer llunio a "
-"ffurfio eich system Mandrake"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Rhyngwynebau defnyddwyr"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mae Mandrake Linux 8.2 yn darparu 11 amgylchedd penbwrdd graffigol a "
-"rheolwyr ffenestri gwahanol i ddewis ohonynt gan gynnwys Gnome 1.4, KDE "
-"2.2.2., Window Maker 0.8, a'r gweddill"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Meddalwedd Gwasanethwyr"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Trowch eich peiriant i fod yn wasanaethwr pwerus gydag ychydig gliciau ar "
-"eich llygoden: gwasanaethwyr gwe, e-bost, mur gwarchod, llwybrydd, "
-"gwasanaethwr ffeil ac argraffu..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Gemau"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mae Mandrake Linux 8.2 yn darparu'r gemau Cod Agored gorau - arcęd, antur, "
-"cardiau, chwaraeon, strategaeth..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Hoffech chi ddysgu Linux yn syml, yn gyflym, ac am ddim? Mae MandrakeSoft yn "
-"darparu hyfforddiant ar Linux, yn ogystal â ffordd i fesur eich cynnydd, yn "
-"MandrakeCampus - ein canolfan hyfforddiant ar-lein"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Mae cefnogaeth werthfawr gan Gymuned Linux, a chan MandrakeSoft i'w gael yn "
-"hwylus. Ac os ydych yn hen law ar Linux, cewch fod yn \"Arbenigwr\" a rhannu "
-"eich gwybodaeth ar ein safle cefnogi"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Ar gyfer eich holl brojectau TG, mae ein hymgynghorwyr ar gael i ddadansoddi "
-"eich anghenion a chynnig atebion unigryw i chi. Medrwch fanteisio ar brofiad "
-"eang MandrakeSoft fel cynhyrchydd Linux i ddarparu ateb TG gwell i'ch busnes."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Mae amrediad eang o ddarpariaeth Linux, yn ogystal â chynigion arbennig ar "
-"gynnyrch a 'difyrrwch', ar gael ar-lein yn ein e-siop"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Am ragor o wybodaeth ar Wasanaethau Profesiynol a chynigion masnachol "
-"MandrakeSoft, gwelwch y dudalen we ganlynol:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Gosod pecynnau..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Methu darllen eich tabl rhaniadau. Mae'n rhy lwgr i mi :[\n"
-"Af ymlaen i flancio rhaniadau gwael"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Gwall!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Methu canfod ffeil delwedd angenrheidiol '%s'."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Ffurfweddwr Awto-Osod"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Rydych ar fin ffurfweddu disg meddal Gosod Awtomatig. Mae'r nodwedd hwn "
-"braidd yn beryglus a dylid ei ddefnyddio gyda gofal.\n"
-"\n"
-"Gyda'r hodwedd hwn, bydd modd ailchwarau'r gosodiad ar y cyfrifiadur, gan "
-"eich holi'n rhyngweithiol ar gyfer rhai cammau, er mwyn newid eu "
-"gwerthoedd.\n"
-"\n"
-"Ydych chi eisiau parhau?\n"
-"?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "FFurfweddiad Camau Awtomatig"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Dewiswch ar gyfer pob cam a fydd yn ail chwarae fel eich gosodiad, neu a "
-"fydd gyda llaw"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Croeso\n"
-"\n"
-"Mae paramedrau'r awto osod i'w cael yn yr adran ar y chwith"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Llongyfarchiadau!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Mae'r disg meddal wedi ei gynhyrchu'n llwyddiannus. \n"
-"Medrwch ail chwarae eich gosodiad."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Awto Gosod"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Ychwanegu eitem"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Tynnu'r eitem olaf"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-" Adroddiad DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" Adroddiad Daemon DrakBackup \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" Manylion Adroddiad DrakBackup \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "cyfanswm y cynnydd"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Ffeiliau system wrth gefn"
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Ffeiliau cadw wrth gefn y Disg Caled"
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Cynnydd Disg Caled wrth Gefn..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Cadw wrth gefn ffeiliau eraill..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"rhestr ffeil yrrwyd gan FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) anhawster cysylltiad FTP: Nid oedd yn bosibl anfon eich ffeiliau wrth "
-"gefn drwy FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Gwall wrth anfon e-bost. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Dewis ffeiliau"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Dewiswch y ffeiliau neu gyfeiriaduron a chliciwch 'Ychwanegu'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Gwiriwch pob dewis sydd angen arnoch.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Mae'r dewisiadau hyn yn medru cadw wrth gefn ac adfer pob ffeil yn eich "
-"cyfeiriadur /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Cadw wrth gefn ffeiliau System. ( cyfeiriadur /etc )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Cadw wrth gefn cynyddol (peidio disodli hen ffeiliau wrth gefn)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Peidio cynnwys ffeiliau hanfodol (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Gyda'e dewis hwn medrwch adfer unrhyw fersiwn\n"
-"o'ch cyfeiriadur /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Gwiriwch pob defnyddiwr rydych am eu cynnwys yn eich cadw wrth gefn."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Peidio cynnwys storfa'r porwr"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Defnyddio Cadw wrth Gefn Cynyddol (peidio disodli hen gadw wrth gefn)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Tynnu'r Dewis"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Defnyddwyr"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Defnyddiwch cysylltiad FTP i gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Rhowch enw'r gwesteiwr neu'r IP"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Rhowch y cyfeiriadur i osod y cadw\n"
-"wrth gefn ar y gwesteiwr hwn."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Rhowch eich mewngofnod"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Rhowch eich cyfrinair"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Cofiwch y cyfrinair"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "Cysylltiad FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Cysylltiad Diogel"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Defnyddiwch yr CD/DVDROM i gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Dewiswch eich gofod CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Gwiriwch os ydych yn defnyddio cyfrwng CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Gwiriwch os ydych am ddileu eich CDRW cyn"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Gwiriwch os ydych am gynnwys\n"
-" cychwyn gosod ar eich CD"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Rhowch enw dyfais eich Ysgrifennwr CD\n"
-"ex: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Defnyddiwch dâp i gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Rhowch enw dyfais i'w ddefnyddio ar gyfer cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Rhowch y maint mwyaf\n"
-"i'w ganiatáu ar gyfer Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Rhowch y cyfeiriadur i gadw iddo:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Defnyddiwch y cwota ar gyfer ffeiliau wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Rhwydwaith"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Disg Caled / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "bob awr"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "bob dydd"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "bob wythnos"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "bob mis"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Defnyddiwch ddaemon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Dewiswch faint o amser\n"
-"fydd rhwng pob cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Dewiswch y cyfrwng ar\n"
-"gyfer cadw wrth gefn..."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Defnyddiwch y Disg Caled gyda'i ddaemon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Defnyddiwch FTP gyda daemon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Gwnewch yn siwr bod daemon cron yn cael ei gynnwys yn eich gwasanaethau"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Anfonwch adroddiad e-bost wedi pob cadw wrth gefn i :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Beth"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Lle"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Pryd"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Dewisiadau Eraill"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Ffurfweddiad Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Dewiswch i le rydych am gadw ffeiliau wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "ar Ddisg Caled"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "ar draws Rhwydwaith"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Dewiswch beth rydych am ei gadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "System cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Defnyddwyr Cadw wrth Gwfn"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Dewis defnyddwyr gyda llaw"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Ffynhonell Cadw wrth Gefn:\n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau System: \n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau Defnyddiwr:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau Eraill: \n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"Cadw ar Ddisg caled ar lwybr: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Cadw ar FTP ar y gwesteiwr: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t enw defnyddiwr:%s\n"
-"\t\t ar lwybr: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"-Dewisiadau:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tPeidiwch cynnwys Ffeiliau System\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t Bydd Cadw wrth gefn yn defnyddio tar a bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBydd Cadw wrth Gefn yn defnyddio tar a gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) i gynnwys :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disg Caled.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Rhwydwaith drwy FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Rhwydwaith drwy SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Dim ffurfweddiad, cliciwch Dewin neu Uwch.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Rhestr o ddata i'w adfer:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Rhestr o ddata llwgr:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Dad-diciwch hwn neu ei dynnu'r tro nesaf."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Mae'r ffeiliau wrth gefn wedi eu llygru"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr " Mae eich dewis data wedi ei "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " Ei adfer yn Llwyddiannus ar %s "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr " Adfer y Furfweddiad"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Iawn i adfer ffeiliau eraill"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Rhestr defnyddwyr i'w adfer ( dim ond y diweddaraf yn ôl y defnyddwyr, sy'n "
-"bwysig )"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Cadw'r ffeiliau system wrth gefn cyn:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "dewiswch y data i'w adfer"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Defnyddiwch y Ddisg Caled ar gyfer cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Adfer o'r Ddisg Caled."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Rhowch y cyfeiriadur lle mae'r ffeiliau wrth gefn yn cael eu cadw"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Dewis cyfrwng arall i adfer ohono"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Cyfrwng Arall"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Adfer y system"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Adfer Defnyddwyr"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Adfer Arall"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "dewis llwybr arall i adfer ( yn lle / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Gwnewch cadw wrth gefn newydd cyn adfer ( ar gyfer cadw wrth gefn cynyddol "
-"yn unig )"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Tynnu cyfeiriaduron defnyddiwr cyn adfer."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Adfer pob cadw wrth gefn"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Adfer Dewisol"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Cymorth"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Cynt"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Gorffen"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Adeiladu Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Adfer"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Nesaf"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Crëwch gadw wrth gefn cyn ei adfer...\n"
-" neu gwiriwch fod eich llwybr i'w gadw'n gywir."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-"Gwall wrth ddefnyddio sendmail\n"
-" chafodd eich adroddiad e-bost mo'i anfon\n"
-" Ffurfweddwch eich sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Rhestr Pecynnau i'w Gosod"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Gwall wrth anfon ffeil drwy FTP.\n"
-" Cywirwch eich ffurfweddiad FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Dewiswch y data i'w adfer..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Dewiswch y cyfrwng ar gyfer cadw wrth gefn..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Dewiswch y data i'w gadw wrth gefn..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ni chanfyddwyd y ffeil ffurfweddu \n"
-"cliciwch Dewin neu Uwch."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "O dan ddatblygiad...arhoswch."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Ffeiliau System Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Cadw'r ffeiliau eraill wrth gefn"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Cyfanswm Cynydd"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "anfon ffeil drwy FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Anfon ffeiliau..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Rhestr data i'w gynnwys ar CDROM"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Rhowch gyflymder yr ysgrifennydd CD"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Rhowch enw dyfais eich Ysgrifennydd CD (ex: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Ticiwch os ydych eisiau cynnwys cychwyn gosod ar eich CD."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Cadwch wrth Gefn eich ffeiliau ffurfweddu"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Edrych ar Ffurfweddiad Cadw wrth Gefn"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Ffurfweddiad y Dewin"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Ffurfweddiad Uwch"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Cadw wrth Gefn Nawr"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"Yma mae Drakbackup yn caniatáu i chi newid:\n"
-"\n"
-" - Y modd cywasgu:\n"
-" \n"
-" Os wnewch chi glicio cywasgiad bzip2, byddwch yn \n"
-" cywasgu eich data'n well na gzip (tua 2-10%).\n"
-" Nid yw'r dewis wedi ei nodi drwy ragosodiad gan fod\n"
-" angen mwy o amser ar y modd cywasgu hwn (tua 1000% yn fwy).\n"
-"\n"
-"- Y modd diweddaru:\n"
-"\n"
-" Bydd y dewis hwn yn diweddaru eich caw wrth gefn, ond\n"
-" nid yw'r dewis hwn wir yn ddefnyddiol gan fo angen dadgywasgu\n"
-" eich cadw wrth gefn cyn bo modd i chi ei ddiweddaru.\n"
-" \n"
-"- Y modd .backupignore\n"
-" Fel gyda cvs, bydd Drakbackup yn anwybyddu pob cyfeiriad\n"
-" yn ffeiliau .backupignore ym mhob cyfeiriadur.\n"
-" ar wahân i: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr "\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"- Ffeiliau system Cadw wrth Gefn\n"
-" \n"
-"\tMae'r dewis hwn yn caniatáu i chi gadw wrth gefn eich\n"
-"\tcyfeiriadur /etc, sy'n cynnwys eich ffeiliau ffurfweddiad.\n"
-"\tByddwch ofalus wrth ei adfer i beidio trosysgrifo:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-"- Ffeiliau Defnyddiwr Cadw wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniatáu i chi ddewis pob defnyddiwr\n"
-"\trydych am gadw wrth gefn ar eu cyfer.\n"
-"\tI ddiogelu lle ar ddisg, argymhellir nad ydych yn cadw storfa'r\n"
-"\t porwr.\n"
-" \n"
-"- Cadw Ffeiliau Eraill wrth Gefn\n"
-"\n"
-"\tMae'r dewis hwn yn caniatáu i chi ychwanegu mwy\n"
-"\to ddata i'w gadw. Gyda'r cadw arall wrth gefn nid\n"
-"\tyw'n bosibl ar hyn o bryd i ddewis cadw wrth gefn\n"
-"\tcynyddol.\t\t\n"
-"\n"
-"Cadw wrth Gefn Cynyddol:\n"
-"\n"
-"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
-"\tMae'r dewis hwn yn caniatáu i chi gadw eich data wrth\n"
-"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
-"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
-"\tdata o ddyddiad penodol.\n"
-"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
-"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"disgrifad o adfer:\n"
-"\n"
-"Dim ond y ffeiliau mwyaf diweddar fydd yn cael eu defnyddio,\n"
-"oherwydd gyda candw wrth gefn cynyddol mae angen adfer\n"
-"pob cadw hyn yn unigol.\n"
-"\n"
-"Felly os nad ydych am adfer defnyddiwr dad-ddewiswch ei ddewisiadau.\n"
-"\n"
-"Ar wahan i hynny, dim ond un o rhain mae modd ei ddewis\n"
-"\n"
-"Cadw wrth Gefn Cynyddol:\n"
-"\n"
-"\tCadw wrth Gefn Cynyddol yw'r dewis mwyaf pwerus.\n"
-"\tMae'r dewis hwn yn caniatáu i chi gadw eich data wrth\n"
-"\tgefn y tro cyntaf ac yna dim ond yr hyn sydd wedi newid.\n"
-"\tYna bydd modd i chi, yn ystod y cam o adfer, adfer eich\n"
-"\tdata o ddyddiad penodol.\n"
-"\tOs nad ydych wedi dewis hwn, bydd yr holl hen ffeiliau\n"
-"\twrth gefn yn cael eu dileu cyn pob cadw wrth gefn. \n"
-"\\n\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Hawlfraint(H 2001 MandrakeSoft gan DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Mae'r rhaglen hon yn feddalwedd rhydd; medrwch ei ailddosbarthu\n"
-"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
-"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
-"2 neu (yn ôl eich dewis) unrhyw fersiwn diweddarach.\n"
-"\n"
-" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
-" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
-" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
-" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
-" wybodaeth.\n"
-"\n"
-" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
-" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA"
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Disgrifiad:\n"
-"\n"
-" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
-" eich ffeiliau system wrth gefn.\n"
-" Yn ystod y ffurfweddiad medrwch ddewis:\n"
-"\t- Ffeiliau system,\n"
-"\t-Ffeiliau defnyddwyr,\n"
-"\t-Ffeiliau eraill.\n"
-"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
-"\n"
-" Mae Drackbackup yn caniatáu i chi ddefnyddio:\n"
-"\t- Disg Caled.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
-"\t- FTP.\n"
-"\t- Webdav.\n"
-"\t- Tâp.\n"
-"\n"
-" Mae Drakbackup yn caniatáu i chi adfer eich system i\n"
-" gyfeiriadur o ddewis y defnyddiwr.\n"
-"\n"
-" Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Ffeil ffurfweddiad:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Camau wrth adfer:\n"
-" \n"
-" Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
-" eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
-" ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
-" gadw wrth gefn cyn adfer.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"disgrifiad o'r dewisiadau:\n"
-"\n"
-"Byddwch ofalus wrth ddefnyddio cadw wrth gefn ftp, oherwydd\n"
-"dim ond ffeiliau wrth gefn sydd wedi eu hadeiladu sy'n cael eu\n"
-"hanfon at y gwasanaethwr.\n"
-"Felly, rhaid i chi adeiladu eich cadw wrth gefn ar eich disg caled\n"
-"cyn ei anfon i'r gwasanaethwr.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Anawsterau Adfer Ffeiliau wrth gefn\n"
-"\n"
-"Yn ystod yr adfer bydd Drakbackup yn gwirio eich holl\n"
-"ffeiliau wrth gefn cyn eu hadfer.\n"
-"Cyn adfer, bydd Drakbackup yn tynnu'r cyfeiriadur\n"
-"gwreiddiol, a byddwch yn colli eich holl ddata. Mae'n\n"
-"bwysig eich bod yn ofalus a pheidio newid y ffeiliau\n"
-"data wrth gefn gyda llaw.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Disgrifiad:\n"
-"\n"
-" Mae Drakbackup yn cael ei ddefnyddio i cadw\n"
-" eich ffeiliau system wrth gefn.\n"
-" Yn ystod y ffurfweddiad medrwch ddewis:\n"
-"\t- Ffeiliau system,\n"
-"\t- Ffeiliau defnyddwyr,\n"
-"\t- Ffeiliau eraill.\n"
-"\tneu Eich holl system...ac Arall (megis Rhaniadau Windows)\n"
-"\n"
-" Mae Drackbackup yn caniatáu i chi ddefnyddio:\n"
-"\t- Disg Caled.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (gyda awto gychwyn, achub ac awto osod.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tâp.\n"
-"\n"
-" Mae Drakbackup yn caniatáu i chi adfer eich system i\n"
-" gyfeiriadur o ddewis y defnyddiwr.\n"
-"\n"
-" Yn rhagosodedig bydd ffeiliau wrth gefn yn cael eu cadw yn eich\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Ffeil ffurfweddiad:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Camau wrth Adfer:\n"
-" \n"
-" Yn ystod yr adfer bydd Drakbackup yn tynnu\n"
-" eich cyfeiriadur gwreiddiol a gwirio nad yw'r holl \n"
-" ffeiliau wrth gefn wedi eu llygru. Argymhellir i chi \n"
-" gadw wrth gefn cyn adfer.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Mae gosod %s wedi methu. Digwyddodd y gwall canlynol:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Chwilio am ffontiau wedi eu gosod"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Tynnu ffontiau wedi eu gosod"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "pob ffont"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "heb ganfod ffontiau"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "gorffen"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "methu canfod unrhyw ffont yn eich rhaniad gosodedig"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Ailddewis y ffontiau cywir"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "methu cnafod unrhyw ffontiau.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Chwilio am ffontiau yn y rhestr gosod"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copďo ffontiau"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Gosod ffontiau True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "arhoswch yn ystod ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Wedi gosod True Type"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Trosiad ffontiau"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "adeiladu math 1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "cyfeirio Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "trosi ffontiau ttf "
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "trosi ffontiau pfm"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Llethu ffeiliau dros dro"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Ail gychwyn XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Llethu ffeiliau Ffontiau"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "ail gychwyn xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Cyn gosod unrhyw ffontiau, gwnewch yn siwr bod gennych yr hawl i'w defnyddio "
-"a'u gosod ar eich system.\n"
-"\n"
-"- Medrwch osod y ffontiau yn y dull arferol. Mewn achosion prin, gall "
-"ffontiau ffug rewi eich Gwasanaethwr X"
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Mewnforio Ffontiau"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Estyn Ffontiau Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Dad osod Ffontiau"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Dewisiadau Uwch"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Rhestr Ffontiau"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Dewiswch y rhaglenni fydd yn cynnal ffontiau:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Argraffyddion Generig"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Dewiswch ffeil neu gyfeiriadur y ffont a chlicio 'Ychwanegu'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Gosod Rhestr"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "cliciwch yma os ydych yn siwr."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "yma os nad."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Dad ddewis Popeth"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Dewis Popeth"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Rhestr Tynnu"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Prawf Init"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copďo'r ffontiau ar eich system!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Gosod a throsi ffontiau"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Wedi'r Gosod"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Tynnu ffontiau oddi ar eich system!"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Wedi'r dad osod"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Rhannu Cysylltiad â'r Rhyngrwyd"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Mae Rhannu Cysylltiad â'r Rhyngrwyd wedi ei alluogi"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei alluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "dymunol"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "gwrthod"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ailffurfweddu"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Analluogi gwasanaethwyr..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Mae rhannu cysylltiad â'r Rhyngrwyd wedi ei analluogi."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Mae Rhannu Cysylltiad a'r Rhyngrwyd wedi ei analluogi"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad rhannu cysylltiad a'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei analluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "galluogi"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Galluogi gwasanaethwyr..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Mae rhannu cysylltiad â'r Rhyngrwyd wedi ei alluogi."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i rannu ei cysylltiad Rhyngrwyd\n"
-"Gyda'r nodwedd hwn bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
-"medru rhannu cyswllt rhyngrwyd y\n"
-"cyfrifiadur hwn.\n"
-"\n"
-"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
-"(LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rhyngwyneb %s (gan ddefnyddio modiwl %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Rhagwyneb %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nid oes addasydd rhwydwaith ar eich system!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system. Rhedwch "
-"yr offeryn ffurfweddu caledwedd."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Rhyngwyneb rhwydwaith"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Dim ond un addasydd rhwydwaith wedi ei ffurfweddu sydd ar eich system\n"
-"\n"
-"%s\n"
-"\n"
-"Rwyf ar fin gosod eich Rhwydwaith Lleol gyda'r addasydd hwnnw.."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Dewiswch ba addasyddion rhwydwaith fydd yn cael eu cysylltu â'ch Rhwydwaith "
-"Lleol."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Mae rhag wyneb y rhwydwaith wedi ei ffurfwedu eisoes"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Rhybudd, mae'r addaswr rhwydwaith (%s) wedi ei ffurfweddu eisoes.\n"
-"\n"
-"Ydych chi eisiau ail ffurfweddiad awtomatig?\n"
-"\n"
-"Medrwch ei wneud gyda llaw ond mae'n rhaid i chi wybod beth ydych yn ei "
-"wneud."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Ail ffurfweddiad awtomatig"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Dangoswch y ffurfweddiad rhag wyneb cyfredol"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Ffurfweddiad presennol '%s':\n"
-"\n"
-"Rhwydwaith: %s\n"
-"Cyfeiriad IP: %s\n"
-"Priodweddau IP: %s\n"
-"Gyrrwr: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Medraf gadw eich ffurfweddiad cyfredol a chymryd eich bod eisoes wedi gosod "
-"gwasanaethwr DHCP. Os felly, dilyswch fy mod wedi darllen y rhwydwaith "
-"dosbarth C rydych yn ei ddefnyddio fel eich rhwydwaith lleol, yn gywir. Ni "
-"fyddaf yn ei newid na chyffwrdd â ffurfweddiad eich gwasanaethwr DHCP.\n"
-"\n"
-"Neu, medraf ail ffurfweddu eich rhag wyneb ac (ail)ffurfweddi gwasanaethwr "
-"DHCP ar eich cyfer.\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Rhwydwaith Lleol Dosbarth C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "Gwasanaethwr DHCP IP (Hwn)"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Ail ffurfweddi rhag wyneb a gwasanaethwr DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Nid yw'r Rhwydwaith Leol yn terfynnu gyda '.0', tynnu allan."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Canfuwyd gwrthdaro posib yng nghyfeiriad LAN ffurfweddiad presennol %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Wedi canfod ffurfweddiad mur gwarchod!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Rhybudd! Mae ffurfweddiad mur gwarchod wedi ei ganfod. Efallai bydd angen "
-"atgyweirio gyda llaw ar ôl y gosodiad."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Ffurfweddu..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ffurfweddio sgriptiau, gosod meddalwedd, cychwyn gwasanaethwyr..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Anhawster wrth osod pecyn %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Mae popeth wedi ei ffurfweddu\n"
-"Gallwch rannu cysylltiad â'r Rhyngrwyd gyda chyfrifiaduron eraill ar eich "
-"Rhwydwaith Lleol gan ddefnyddio ffurfweddiad rhwydwaith awtomatig (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei anallluogi ar hyn o bryd."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Mae'r gosodiad wedi ei gyflawnu, mae wedi ei allluogi ar hyn o bryd."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nid oes Rhannu Cysylltiad â'r Rhyngrwyd wedi eu ffurfweddu o'r blaen."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Ffurfweddiad rhannu cysylltiad â'r Rhyngrwyd"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Croeso i'r Gwasanaeth Rhannu Cysylltiad â'r Rhyngrwyd\n"
-"\n"
-"%s\n"
-"\n"
-"Cliciwch Ffurfweddu i gychwyn y dewin gosod."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ffurfweddiad y rhwydwaith (%d addasydd)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Proffil:"
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Proffl dileu"
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Proffil i'w ddileu:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Proffil newydd..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Enw'r proffil i'w greu ( mae'r proffil newydd yn cael ei greu fel copi o'r "
-"un cyfredol):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Enw gwesteiwr:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Mynediad i'r Rhyngrwyd"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Math: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Mynedfa:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Rhyngwyneb:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Statws"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Arhoswch"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Ffurfweddu Mynediad i'r We..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Ffurfweddiad y Rhwydwaith Lleol"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Gyrrwr"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Rhyngwyneb"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Stad"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Ffurfweddu'r Rhwydwaith Lleol..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Cliciwch yma i gychwyn y dewin ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Dewin..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Gosod"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Arhoswch...Gosod y ffurfweddiad"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Wedi cysylltu"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Heb gysylltu"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Cysylltu..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Dadgysylltu..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
-"defnyddio eich rhwydwaith."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych unrhyw rhagwynebau wedi\n"
-"eu ffurfweddio. Ffurfweddwch nhw'n gyntaf\n"
-"drwy glicio ar 'Ffurfweddu'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Ffurfweddiad Rhwydwaith Lleol (LAN)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Addasydd %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocol Cychwyn"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Cychwyn y peiriant"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cleient DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "cychwyn nawr"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "dad weithredu nawr"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Nid yw'r rhag wyneb hwn wedi ei ffurfweddu eto.\n"
-"Cychwynnwch y dewin ffurfweddi yn y brif ffenestr."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych cysylltiad â'r rhyngrwyd.\n"
-"Crëwch un drwy glicio ar 'Ffurfweddu'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Ffurfweddiad cysylltiad â'r Rhyngrwyd"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Ffurfweddu Cysylltiad â'r Rhyngrwyd"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Math o gyswllt:"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Paramedrau"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Mynedfa"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Cerdyn Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cleient DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Gosod y lefel diogelwch"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Canolfan Rheoli"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Dewiswch yr offeryn rydych am ei ddefnyddio"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cabl)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "UDA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "UDA (cabl)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "UDA (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Tseina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Siapan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Siapan (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Dwyrain Ewrop"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Iwerddon"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Gorllewin Ewrop"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Awstralia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Zeland Newydd"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "De Affrica"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Yr Ariannin"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Rhowch eich safon teledu a gwlad"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Safon Teledu:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Ardal:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Wrthi'n sganio am sianeli Teledu ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Sganio am Sianel Teledu"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "defnydd: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Dewiswch gynllun alweddell"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ydych chi eisiau i'r Backspace ddychwelyd Dileu yny consol?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Newid CD-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Rhowch y CD Gosod yn eich gyrwr a chlicio Iawn ar ôl gorffen\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi diweddaru."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Methu cychwyn diweddariad byw!!! \n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Mae'r newid wedi ei gyflawni, ond i fod yn effeithiol mae'n rhaid i chi "
-"allgofnodi"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Dangos ar y diwrnod penodol yn unig"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ffeil/_Newydd"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ffeil/_Agor"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/File/_Cawd"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Cawd _fel"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Ffeil/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Dewisiadau"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Dewisiadau/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Cymorth"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Cymorth/_Ynghylch..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Defnyddiwr"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Negeseuon"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Esboniadau Offer Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "chwilio"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Offeryn i fonitro eich cofnodion"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Gosodiadau"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "cydweddu"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "ond heb fod yn cydweddu"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Dewis ffeil"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendr"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Cynnwys y ffeil"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Rhybudd E-bost/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "arhoswch, dosbarthu ffeil: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Rhybudd ffurfweddiad E-bost/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Croeso i'r gwasanaeth ffurfweddu e-bost/SMS\n"
-"\n"
-"Yma bydd modd i chi osod y system rhybuddio.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "gosodiad gwasanaeth"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Byddwch yn derbyn rhybudd os na fydd un o'r gwasanaethu hyn yn rhedeg"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "gosodiad llwyth"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Byddwch yn derbyn rhybudd os yw'r llwyth yn uwch na'r gwerth hwn"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "ffurfweddiad rhybudd"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Ffurfweddiwch y ffordd mae'r system yn eich rhybuddio"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Cadw fel..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Dewiswch math eich llygoden"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "neb ganfod serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Efelychu'r trydydd botwm?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "Wedi canfod %s ar %s, ei ffurfweddi?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Dewiswch sganiwr"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Nid yw sganiwr %s yn cael ei gynnal"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dyfais cychwyn"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Rhaid i sganiwr %s gael ei ffurfweddu gan printerdrake.\n"
-"Medrwch gychwyn printerdrake o adran Galedwedd Canolfan Rheoli Mandrake"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Ffurfweddiad Mur Gwarchod"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Ffurfweddiad Mur Gwarchod"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Mur Gwarchod\n"
-"\n"
-"Rydych eisoes wedi gosod mur gwarchod\n"
-"Cliciwch Ffurfweddu i newid neu dynnu'r mur gwarchod"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Mur gwarchod\n"
-"\n"
-"Cliciwch Ffurfweddu i osod mur gwarchod safonnol"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Dewis eich iaith"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Dewis dosbarth gosod"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Canfod disg caled"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Ffurfweddu llygoden"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Dewis eich allweddell"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Diogelwch"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "System ffeil gosod"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Fformatio rhaniadau"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Dewis pecynnau i'w gosod"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "System osod"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ychwanegu defnyddiwr"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Ffurfweddu rhwydwaith"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Ffurfweddu gwasanaethau"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Gosod llwythwr cychwyn"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Creu disg cychwyn"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Ffurfweddu X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Diweddariadau system gosod"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Gadael gosod"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"ffurfweddiadur tinyfirewall\n"
-"\n"
-"Mae hwn yn ffurfweddu mur gwarchod personol ar gyfer y peiriant \n"
-"Mandrake Linux hwn. Am fur gwarchod pwrpasol pwerus, \n"
-"edrychwch ddosbarthiad arbennigol MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Byddwn nawr yn gofyn cwestiynnau am wasanaethau'r hoffech eu \n"
-"caniatáu i'r Rhyngrwyd gysylltu â hwy. Meddyliwch yn ofalus am y \n"
-"cwestiynnau, mae diogelwch eich cyfrifiadur yn bwysig.\n"
-"\n"
-"Os nad ydych yn defnyddio un o'r gwasanaethau hyn \n"
-"gwarchodwch ef. Mae modd newid y ffurfweddiad pryd \n"
-"bynnag hoffech chi drwy ail redeg y rhaglen."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr gwe ar y peiriant hwn i'r holl\n"
-"Ryngrwyd ei weld? Os ydych yn rhedeg gwasanaethwr gwe\n"
-"sydd ar gyfer y peiriant hwn yn unig, yna atebwch NA.\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr enw ar y peiriant hwn? Os nad ydych wedi\n"
-"gosod un i rhannu gwybodaeth IP a parth i'r holl Ryngrwyd, yna atebwch NA.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Ydych chi am ganiatáu cysylltiadau Secure Shell (ssh)? Mewngofnod\n"
-"posib i gymryd lle telnet yw hwn. Os ydych yn defnyddio telnet, dylech wir \n"
-"newid i ssh. Nid yw telnet wedi ei amgryptio - gall rhai ymosodwyr ddwyn\n"
-"eich cyfrinair. Mae ssh wedi ei amgryptio ac nid yw'n caniatáu i eraill "
-"wrando."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"A ydych am ganiatáu cysylltiadau telnet i mewn?\n"
-"Mae hyn yn erchyll o aniogel, fel soniwyd yn y sgrin diwethaf. Rydym\n"
-" yn argymell yn gryf eich bod yn ateb Na yn fan hyn a defnyddio ssh\n"
-"yn lle telnet\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr FTP sydd angen cysylltiad â'r Rhyngrwyd?\n"
-"Os ydych rydym yn argymell yn gryf eich bod yn ei ddefnyddio ar gyfer\n"
-"trosglwyddiadau anhysbys yn unig. Gall unrhyw gyfrinair sy'n cael ei anfon\n"
-"drwy FTP gael ei ddwyn, gan nad yw FTP'n defnyddio amgryptiad ar gyfer\n"
-"trosglwyddo cyfrineiriau\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr e-bost? Os ydych yn\n"
-"anfon eich negeseuon drwy pine, mutt neu unrhyw gleient testun arall\n"
-"yna mae'n debyg eich bod. Oni bai am hynny, dylech ddiogelu hwn gyda\n"
-"mur gwarchod\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"A ydych yn rhedeg gwasanaethwr POP neu IMAP? Byddai\n"
-"hyn yn cael ei ddefnyddio fel gwestai ar gyfer cyfrifon e-bost\n"
-"nad ydynt yn gysylltiedig a'r we, drwy'r peiriant hwn\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Mae'n ymddangos eich bod yn rhedeg cnewyllyn 2.2 Os\n"
-"yw eich rhwydwaith wedi ei greu'n awtomatig gan gyfrifiadur\n"
-"yn eich cartref neu swyddfa (neilltuad dynamigol) rhaid caniatáu\n"
-"ar gyfer hyn. Ai dyma sut mae hi?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Ydi eich cyfrifiadur yn cydweddi amser gyda cyfrifiadur arall?\n"
-"Fel rheol, mae hyn yn cael ei ddefnyddio gan gyrff Unix/Linux\n"
-"cymhedrol-mawr i gydweddu amser ar gyfer mewngofnodi ag ati.\n"
-"Os nad ydych yn rhan o swyddfa fwy ac heb glywed am hyn, mwy\n"
-"na thebych, nid ydych."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Mae furfweddiad wedi ei gwblhau. Gawn ni ysgrifennu'r newidiadau hyn i "
-"ddisg?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Methu agor %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Methu agor %s ar gyfer ysgrifennu: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nid wyf angen DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Rwyf eisiau DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nid wyf angen NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Rwyf eisiau NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Peidio Cadw"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Cadw a Gadael"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Dewin Ffurfweddu'r Mur Cadarn"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Na ((rhowch hwn tu nôl i fur cadarn rhag y rhyngrwyd)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Iawn (caniatewch hwn drwy'r mur cadarn)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Arhoswch,... Gwirio'r pecynnau sydd wedi eu gosod"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Wedi methu gosod y pecynnau angenrheidiol: %s a Bastille.\n"
-" Ceisiwch eu gosod gyda llaw."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Gwe/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Cyfrifiadur Rhwydwaith (cleient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-"Gwasanaethwr NFS, gwasanaethwr SMB, gwasanaethwr dirprwyol, gwasanaethwr ssh"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Swyddfa"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Man Gwaith Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Offer ar gyfer eich Palm PiloT neu eich Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Man Gwaith"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Mur Gwarchod/Llwybrydd"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Enw Parth a gwasanaethwr Gwybodaeth Rhwydwaith"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Rhaglenni swyddfa: prosesydd geiriau (Kword, abiword, taenlenni (kspread, "
-"gnumeric), darllennydd pdf, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Offer Sain: mp3 neu chwarewyr midi, cymysgwyr, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Llyfrau a Howto's ar Linux a Meddalwedd Rhydd"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Man Gwaith KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Aml-gyfrwng - Fideo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Casgliad o offer ar gyfer e-bost, newyddion, y we, trosglwyddo ffeiliau, a "
-"sgwrsio"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Cronfa Ddata"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Gwasanaethwr cronfa data PostgreSQL neu MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Offer i wneud ffurfweddu'ch cyfrifiadur yn haws"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Aml-gyfrwng - Sain"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Gwaasanaethau"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dogfennaeth"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Offer y Consol"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Gwasanaethwr e-bost Postfix, gwasanaethwr newyddion Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Man Rhyngrwyd"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Man Aml-gyfrwng"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Ffurfweddiad"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Rhagor o Ben Bwrdd Graffig (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE - Amgylchedd Penbwrdd K, yr amgylchedd graffig sylfaenol gyda chasgliad "
-"o offer"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Amgylchedd Graffig"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Offer i greu a llosgi CDau"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Gweithfan Swyddfa"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Gwasanaethwr"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ag ati"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Rhaglenni graffeg megis The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Llyfrgelloedd datblygiadol C a C++, rhaglenni a ffeiliau cynnwys"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Gwasanaethwr Cyfrifiadur Rhwydwaith"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-bost/Offer Grwp/Newyddion"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Man chwarae"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Chwarewyr a golygyddion fideo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Aml-gyfrwng - Graffig"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Rhaglenni difyrrwch: arcęd, byrddau, strategaeth, ag ati"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Casgliad o offer i ddarllen ac anfon e-bost a newyddion (pine, mutt, tin..) "
-"ac i bori'r We"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archifio, efelychwyr, monitro"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Cyllid Personol"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Amgylchedd graffig gyda chasgliad o raglenni ac offer penbwrdd hawdd eu "
-"defnyddio."
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientiaid ar gyfer protocolau amrywiol yn cynnwys ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Porth i'r rhyngrwyd"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Chwarae sain a fideo/rhaglenni golygu"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Pen Desg Graffigol Eraill"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Golygyddion, cregyn, offer ffeilio, terfynellau"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Rhaglenni i reoli eich cyllid, megis gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Rheoli Gwybodaeth Bersonol"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Aml-gyfrwng - Llosgi CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Gweithfan Gwyddonol"
-
-#~ msgid "About"
-#~ msgstr "Allwedd amgryptio (eto)"
-
-#~ msgid " Help "
-#~ msgstr " Cymorth"
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "Nid yw XawTV wedi ei osod ...\n"
-#~ "Dylech ei osod.\n"
-#~ " Teipiwch \"urpmi xawtv\""
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
deleted file mode 100644
index 6edcd2ac1..000000000
--- a/perl-install/share/po/da.po
+++ /dev/null
@@ -1,12282 +0,0 @@
-# Danish translation of/Dansk oversćttelse af
-# Mandrake Linux DrakX.
-# Copyright (C) 1999-2001 MandrakeSoft
-#
-# In order of activity:
-# 1, Keld Simonsen <keld@dkuug.dk>, 2000-2002
-# 2, Jacob Nordfalk <nordfalk@mobilixnet.dk>, 2001-2002
-# 3, Troels Liebe Bentsen <tlb@iname.com>, 1999-2000
-# 4, Nikolaj Berg Amondsen <mr_nba@get2net.dk>, 2000
-# 5, Jacob Sparre Andersen, <sparre@sslug.dk>, 2000
-# 6, Kenneth Christiansen, <kenneth@ripen.dk>, 2000
-# 7, Jens Burkal <jburkal@get2net.dk>, 1999
-# 8, Mads Stenhuus Hansen <msh@com.dtu.dk>, 1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 13:04+0100\n"
-"Last-Translator: Keld Simonsen <keld@dkuug.dk>\n"
-"Language-Team: Danish <dansk@klid.dk>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Konfigurér alle skćrme uafhćngigt"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Brug Xinerama-udvidelse"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfigurér kun kort \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Flerskćrms-konfiguration"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Dit system understřtter konfiguration af flere skćrme\n"
-"Hvad vil du gřre?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikkort"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Vćlg et grafikkort"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Vćlg en X-server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Vćlg en X-driver"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X-driver"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Hvilken konfiguration af XFree řnsker du?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration, men kun med XFree %s.\n"
-"Dit kort er understřttet af XFree %s som kan have bedre understřttelse i 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Dit kort kan have 3D hardware accelerations-understřttelse med XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s med 3D hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dit kort kan have 3D acceleration understřttelse, men kun med XFree %s,\n"
-"VIGTIGT: Dette er eksperimentelt og kan fĺ din maskine til at lĺse eller gĺ "
-"ned."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s med EKSPERMENTAL 3d hardware acceleration"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Dit kort kan have 3D acceleration understřttelse, men kun med XFree %s.\n"
-"VIGTIGT: Dette er eksperimentelt og kan fĺ din maskine til at lĺse eller gĺ "
-"ned.\n"
-"Dit kort er understřttet af XFree %s som kan have bedre understřttelse i 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installations-skćrmdriver)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfiguration"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Vćlg hukommelsesmćngde for dit grafikkort"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Vćlg server-indstillinger"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Vćlg en skćrmtype"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Skćrm"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange "
-"gange (per sekund) hele skćrmbilledet bliver genopfrisket, og (vigtigst af "
-"alt) den vandrette frekvens, som angiver antallet af vandrette linier der "
-"kan tegnes pĺ skćrmen hvert sekund.\n"
-"\n"
-"Det er MEGET VIGTIGT at du ikke angiver en skćrmtype med "
-"opdateringsfrekvenser, der er střrre end din skćrms formĺen: du risikerer at "
-"řdelćgge din skćrm.\n"
-"Hvis du er i tvivl, břr du vćlge en opsćtning, som du med SIKKERHED ved\n"
-"at din skćrm kan klare."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Vandret opdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Lodret opdateringsfrekvens"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Skćrm ikke konfigureret"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafikkort er endnu ikke konfigureret"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Oplřsninger ikke valgt endnu"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Řnsker du at afprřve konfigurationen?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Advarsel: afprřvning af dette grafikkort kan fĺ din maskine til at lĺse"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test konfigurationen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"prřv at ćndre nogle parametre"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "En fejl opstod:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Vender tilbage om %d sekunder"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Er dette den korrekte indstilling?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "En fejl opstod, prřv at ćndre nogle parametre"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Oplřsning"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Vćlg oplřsning og farvedybde"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkort: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86-server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mere"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "O.k."
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspert-udgave"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Vis alle"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Oplřsninger"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-type: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muse-type: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muse-enhed: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skćrm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Skćrms vandrette frekvens: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Skćrms lodrette frekvens: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkort: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkort identifikation: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafik-hukommelse: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farvedybde: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Oplřsninger %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86-server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 driver: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Forbereder konfiguration af X"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Hvad řnsker du at gřre?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Skift skćrmtype"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Skift grafikkort"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Foretag ćndringer i server-indstillinger"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Skift oplřsning"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Vis information"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Test igen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Afslut"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behold ćndringer?\n"
-"Nuvćrende konfiguration er:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Start X ved systemstart"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Jeg kan sćtte din maskine op til automatisk at starte X ved\n"
-"opstart. Řnsker du at starte X hver gang du genstarter?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Log ind i %s igen for at aktivere ćndringerne"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Log ud og tryk herefter pĺ Ctrl-Alt-Bak"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 farver (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusinde farver (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusinde farver (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliarder farver (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mb"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mb eller mere"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard-VGA, 640x480 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super-VGA, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024x768 ved 87 Hz interlaced (ikke 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ved 87 Hz interlaced, 800x600 ved 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Udvidet Super-VGA, 800x600 ved 60 Hz, 640x480 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 ved 60 Hz, 800x600 ved 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hřjfrekvens SVGA, 1024x768 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvens, som kan klare 1280x1024 ved 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Skćrm, som kan klare 1600x1200 ved 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Skćrm, som kan klare 1600x1200 ved 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Fřrste sektor af opstartspartition"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Fřrste sektor pĺ disken (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO-installering"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor vil du placere opstartsprogrammet?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installering"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO med tekstmenu"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk menu"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Start fra DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Systemopstarterens hovedindstillinger"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Systemopstarter der skal bruges"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Systemopstarterens installation"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Opstartsenhed"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (virker ikke med gamle BIOS'er)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Videoindstilling"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Ventetid fřr opstart af forvalgt styresystem"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Adgangskode"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Adgangskode (igen)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Begrćns kommandolinie-indstillinger"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "begrćns"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Rens /tmp ved hver systemopstart"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Prćcis RAM-mćngde, hvis pĺkrćvet (fandt %d Mb)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Aktivér multiprofiler"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Angiv RAM-střrrelse i Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Indstillingen ``Begrćns kommandolinie-indstillinger'' er intet vćrd uden\n"
-"en adgangskode"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Prřv igen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Adgangskoderne stemmer ikke overens"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init-besked"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Ĺben firmwareforsinkelse"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Ventetid fřr kerneopstart"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Skal det vćre muligt at starte fra CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Skal det vćre muligt at starte fra OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Forvalgt styresystem?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Du besluttede at installere opstartsindlćseren pĺ en partition.\n"
-"Dette indikerer at du allerede har en opstartsindlćser pĺ disken som du "
-"starter op fra (fx System Commander).\n"
-"\n"
-"Hvilket drev starter du op fra?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Her er fřlgende typer indgange.\n"
-"Du kan tilfřje flere eller ćndre de eksisterende."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Tilfřj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fćrdig"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ćndr"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken type řnsker du at tilfřje"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Andet styresystem (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Andet styresystem (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Andet styresystem (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Billede"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Rod"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Vedhćft"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lćs-skriv"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Usikker"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Mćrkat"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Forvalgt"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-střrrelse"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Ingen video"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Fjern indgang"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tom mćrkat er ikke tilladt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Du skal angive en kerne-fil"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Du skal angive en root-partition"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Denne mćrkat er allerede brugt"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fandt %s %s grćnsesnit"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Har du én til?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du nogen %s grćnsesnit?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nej"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Se info for maskinel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg prřve?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I nogen tilfćlde behřver %s driveren at have ekstra information for at "
-"virke\n"
-"ordentligt, selv om den normalt virker fint uden. Řnsker du at angive "
-"ekstra\n"
-"parametre for den eller tillade driveren at sondere din maskine for\n"
-"den information den behřver? Af og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke forĺrsage nogen skader."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specificér parametre"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Du kan nu angive parametre til modul %s.\n"
-"Bemćrk at alle adresser břr indtastes med foranstillet 0x, fx '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nu sćtte parametre til modulet %s.\n"
-"Parametrene er i formatet ``navn=vćrdi navn2=vćrdi2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulindstillinger:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Indlćsning af modul %s mislykkedes.\n"
-"Řnsker du at prřve igen med andre parametre?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "adgang til X-programmer"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "adgang til rpm-vćrktřjer"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "tillad \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "adgang til administrative filer"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(har allerede tilfřjet %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Adgangskoden er for simpel"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Indtast et brugernavn"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brugernavnet mĺ kun indeholde smĺ bogstaver, tal, `-' og `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Dette brugernavn eksisterer allerede"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Tilfřj bruger"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Indtast en bruger\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Acceptér bruger"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Rigtige navn"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Brugernavn"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Skal"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Jeg kan sćtte din maskine op til automatisk at logge en bestemt bruger pĺ.\n"
-"Řnsker du at bruge denne finesse?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Vćlg den forvalgte bruger:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Vćlg den vindueshĺndtering du řnsker at benytte:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Vćlg det sprog, der skal bruges."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Du kan vćlge andre sprog der vil vćre tilgćngelige efter installationen"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alt"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Tillad alle brugere"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Tilpasset"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ingen fildeling"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakken %s skal vćre installeret. Řnsker du at installere den?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Du kan eksportere med NFS eller Samba. Hvilken vil du bruge"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Krćvet pakke %s mangler"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Řnsker du at tillade brugere at eksportere nogle kataloger i deres "
-"hjemmekatalog?\n"
-"Tilladelse af dette vil sćtte brugere i stand til simpelthen at klikke pĺ "
-"'Fildeling' i konqueror og nautilus.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annullér"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Start userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Deling per bruger bruger gruppen 'fileshare'. \n"
-"Du kan bruge userdrake til at tilfřje en bruger til denne gruppe."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackere"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Ringe"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hřj"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Hřjere"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dette niveau skal bruges med omtanke. Det gřr dit system nemmere at bruge, "
-"men er meget sĺrbart: det mĺ ikke bruges til en maskine der er i et netvćrk "
-"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
-"adgangskoder."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Kontrol af adgangskode er nu aktiveret, men brug som netvćrksmaskine er "
-"stadig ikke anbefalet."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dette er standard sikkerheds-anbefalingen for en maskine\n"
-" med forbindelse til Internettet som klient. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Der er allerede nogle begrćnsninger, og flere automatiske kontroller bliver "
-"křrt hver nat."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Med dette sikkerhedsniveau kan brug som server komme pĺ tale.\n"
-"Sikkerheden er nu hřj nok til at systemet kan bruges som server som tillader "
-"forbindelser fra mange klienter. Bemćrk: hvis din maskine kun er en klient "
-"pĺ internettet břr du hellere vćlge et lavere niveau."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Baseret pĺ det foregĺende niveau, men systemet er nu helt lukket.\n"
-"Sikkerhedsfaciliteterne er nu pĺ deres hřjeste niveau."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Vćlg sikkerhedniveau"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sikkerhedsniveau"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Brug libsafe for servere"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Et bibliotek som beskytter mod angreb via bufferoverlřb og formatstrenge."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Velkommen til %s styresystems-vćlgeren!\n"
-"\n"
-"Vćlg et styresystem i den ovenstĺende liste eller\n"
-"vent %d sekunder for at starte standard.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the suggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Velkommen til GRUB styresystemsvćlgeren!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Brug tasterne %c og %c til at vćlge mellem mulighederne."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Tryk 'enter' for at starte det valgte OS, 'e' for at redigere"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "kommandoerne fřr opstart, eller 'c' for en kommandolinie."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Den fremhćvede mulighed vil blive startet automatisk om %d sekunder."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Ikke nok plads i /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Skrivebord"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start-menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Du kan ikke installere opstartsindlćseren pĺ en %s-partition\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "endnu er ingen hjćlp implementeret.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguration af opstartsudseende"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fil"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fil/_Afslut"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<kontrol>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Katergoriserende oversigt i ny stil"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Oversigt i ny stil"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Traditionel oversigt"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditionel Gtk+-oversigt"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Start Aurora ved opstart"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Du bruger for řjeblikket % som opstartshĺndterer.\n"
-"Klik pĺ Konfigurér for at starte opsćtnings-vejlederen."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurér"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Systemmodus"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Start X-vinduessystemet efter opstart"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nej, jeg řnsker ikke automatisk login"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg řnsker automatisk login med denne (bruger, skrivebord)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "kan ikke lćse /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Gb"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Kb"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mb"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "Tb"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kan ikke lave řjebliksbilleder fřr partitionering"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Řjebliksbilleder vil vćre tilgćngelige efter installation i %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankrig"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgien"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tjekkiet"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Tyskland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grćkenland"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norge"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sverige"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holland"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italien"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Řstrig"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "U.S.A."
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Lav gerne en sikkerhedkopi af dine data fřrst"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lćs omhyggeligt!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Hvis du planlćgger at bruge Yaboot, skal du huske at efterlade fri plads pĺ\n"
-"begyndelsen af disken (2048 sektorer skulle vćre nok)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fejl"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Vejleder"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Vćlg handling"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har én stor FAT partition.\n"
-"(normalt brugt af Microsoft Dos/Windows).\n"
-"Jeg anbefaler, at du ćndrer střrrelsen pĺ partitionen\n"
-"(klik pĺ den, og klik herefter pĺ \"Střrrelsesćndring\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Klik pĺ en partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaljer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journaliserende FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tom"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Andet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Filsystems-typer:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Opret"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Benyt ``%s'' i stedet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Slet"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Benyt ``Afmontér'' fřrst"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter type-ćndring af partition %s vil alle data pĺ denne partition gĺ tabt"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Vćlg en partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Vćlg en ny partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Afslut"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Normal -> Ekspert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ekspert -> Normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Fortryd"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Fortsćt alligevel?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Afslut uden at gemme"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Afslut uden at skrive partitionstabellen?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Řnsker du at gemme /etc/fstab-ćndringerne?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Allokér automatisk"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Slet alt"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Drev-information"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle primćre partitioner er brugt"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Kan ikke tilfřje flere partitioner"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"For at du kan fĺ flere partitioner, skal du slette én, sĺ der kan oprettes "
-"en udvidet partition"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Gem partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Genskaber partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Redder partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Genindlćs partitionstabel"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automontering af flytbare medier"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Vćlg fil"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Kopien af partitionstabellen har ikke samme střrrelse\n"
-"Fortsćt alligevel?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advarsel"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Indsćt en diskette i diskettedrevet\n"
-"Alle data pĺ disketten vil blive slettet"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Forsřger at redde partitionstabellen"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljeret information"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Monteringssti"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Valg"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Střrrelsesćndring"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Flyt"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatér"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montér"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Tilfřj til RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Tilfřj til LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Afmontér"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ćndr RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback anvendelse"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Opret en ny partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Startsektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Střrrelse i Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Filsystemstype: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Monteringssti: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Prćference: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Fjern loopback-filen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Skift partitionstype"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem řnsker du at bruge?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Skifter fra ext2 til ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hvor řnsker du at montere loopback-fil %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor řnsker du at montere partitionen %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
-"loopback.\n"
-"Fjern loopback fřrst"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Udregner FAT-filsystemets grćnser"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ćndrer střrrelsen"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Střrrelsen pĺ denne partition kan ikke ćndres"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Det břr laves en backup af alle data pĺ denne partition"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter ćndring af střrrelsen af partition %s vil alle data pĺ denne partition "
-"gĺ tabt"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Vćlg den nye střrrelse"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Ny střrrelse i Mb: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Hvilken disk řnsker du at flytte den til?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Hvilken sektor řnsker du at flytte den til?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Flytter"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Flytter partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Vćlg en eksisterende RAID som skal udvides"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "ny"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Vćlg en eksisterende LVM som skal udvides"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM-navn?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Denne partition kan ikke bruges til loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback-filnavn: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Giv et filnavn"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Filen er allerede brugt af en anden loopback, vćlg en anden fil"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Filen findes allerede. Skal den bruges?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Modulindstillinger"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Diverse"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "enhed"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "niveau"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "enhedsstřrrelse"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vćr forsigtig: denne operation er farlig."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Hvilken slags partitionering?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Jeg kan desvćrre ikke pĺ nuvćrende tidspunkt acceptere at oprette /boot pĺ "
-"drevet (pĺ en cylinder > 1024). Enten benytter du LILO, hvilket ikke vil "
-"fungere, eller du kan undlade at benytte LILO, hvilket vil betyde, at du "
-"ikke har brug for /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Den partition som du har valgt som rod-partition (/) er fysisk placeret ud "
-"over cylinder nr. 1024 pĺ harddisken, og du har ikke lavet nogen /boot "
-"partition. Hvis du řnsker at benytte LILO, skal du oprette en /boot "
-"partition indenfor 1024-cylinder grćnsen."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Du har valgt en programmeret RAID-partition som rod (/).\n"
-"Ingen systemopstarter kan hĺndtere dette uden en /boot partition.\n"
-"Sĺ vćr omhyggelig med at tilfřje en /boot partition"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitionstabellen for disk %s vil nu blive skrevet pĺ disken!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du skal genstarte maskinen for at aktivere ćndringerne"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter formatering af partitionen %s vil alle data pĺ denne partition gĺ tabt"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formaterer"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formaterer loopback-fil %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Skjul filer"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Flyt filer til den nye partition"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Katalog %s indeholder allerede nogen data\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Flytter filer til den nye partition"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopierer %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Fjerner %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partition %s er nu kendt som %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Enhed: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-drevbogstav: %s (bare et gćt)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Type: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Navn: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Střrrelse: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d til %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formateret\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ikke formateret\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Monteret\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback-fil(er):\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition som opstartes som standard\n"
-" (gćlder kun MS-DOS-opstart, ikke LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Enhedsstřrrelse %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diske %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-filnavn: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Denne partition er nok\n"
-"en driver-partition, du skal\n"
-"sandsynligvis lade den vćre.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne specielle Bootstrap-\n"
-"partition er for at\n"
-"dual-boote dit system.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Střrrelse: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diske %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabel-type: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "pĺ bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Krypteringsnřgle for filsystem"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Vćlg din krypteringsnřgle for filsystemet"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Denne krypteringsnřgle er for nem at gćtte (skal mindst vćre pĺ %d tegn)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Krypteringsnřglerne stemmer ikke overens"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Krypteringsnřgle"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Krypteringsnřgle (igen)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Skift type"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Klik pĺ et medie"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Sřg efter servere"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering af %s mislykkedes"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ved ikke hvordan man formaterer %s som type %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montering af partition %s i katalog %s mislykkedes"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck afsluttet med fejlkode %d eller signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fejl ved afmontering af %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpel"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "med /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruge JFS pĺ partitioner mindre end 16Mb"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruge ReiserFS pĺ partitioner mindre end 32Mb"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringsstier skal begynde med /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Der findes allerede en partition med monterings-sti %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dette katalog břr ligge pĺ rod-filsystemet"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Du skal have et rigtigt filsystem (ext2, reiserfs) til dette "
-"monteringspunkt\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Du kan ikke bruge et krypteret filsystem for monteringspunkt %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ingenting at lave"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fejl ved ĺbning af %s for skrivning: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Der er opstĺet en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
-"der kan oprettes nye filsystemer. Undersřg din maskine for at finde ĺrsagen "
-"til problemet"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Du har ikke nogen partitioner!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux er et flerbrugersystem, og dette betyder at hver bruger kan have "
-"sine egne prćferencer, sine egne filer og sĺ videre. Du kan lćse "
-"brugervejledningen for at lćre mere.\n"
-"Men i modsćtning til root, som er administratoren, vil brugerne som du "
-"tilfřjer her ikke have lov til at ćndre nogetsomhelst undtagen deres egne "
-"filer og deres egen opsćtning. Du skal oprette i det mindste én almindelig "
-"bruger til dig selv.\n"
-"Dette er den konto som du břr bruge til almindelig brug. Selvom det er meget "
-"praktisk at logge ind som root hver dag, kan det ogsĺ vćre meget farligt!\n"
-"Den mindste fejltagelse kan betyde at dit system ikke vil virke mere. Hvis "
-"du laver en alvorlig fejltagelse som almindelig bruger, vil du kun mĺske "
-"tabe nogen information, men ikke hele systemet.\n"
-"\n"
-"Fřrst skal du indtaste dit rigtige navn. Dette er ikke krćvet, selvfřlgelig "
-"kan du faktisk skrive hvad du vil. DrakX vil sĺ tage det fřrste ord du skrev "
-"i boksen og og overfřre det som brugernavn. Dette er navnet, som denne "
-"bruger skal bruge for at logge ind pĺ systemet. Du kan ćndre dette. Du skal "
-"sĺ indtaste en adgangskode hér. Adgangskoden for en ikke-priviligeret "
-"(normal) bruger er ikke sĺ vigtigt som det for Root fra et sikkerhedsmćssigt "
-"synspunkt, men det er ingen grund til at negligere det alligevel - nĺr det "
-"kommer til stykket er dine filer der er i fare. Hvis du klikker pĺ Acceptér "
-"bruger, kan du tilfřje sĺ mange som du řnsker. Tilfřj en bruger for hver af "
-"dine venner: fx din far og din sřster. Nĺr du har tilfřjet alle de brugere "
-"du řnsker, vćlg da Fćrdig.\n"
-"\n"
-"Klik pĺ Avanceret-knappen lader dig ćndre standard-skal for denne bruger\n"
-"(bash er standard)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovenfor er listet de eksisterende Linux-partitioner genkendt pĺ din disk. Du "
-"kan beholde valgene gjort af vejlederen, de er velegnede til almindelig "
-"brug. Hvis du ćndrer disse valg skal du i det mindste definere en rod-"
-"partition '/'. Lad vćre med at vćlge en for lille partition, ellers vil du "
-"ikke kunne installere nok programmel. Hvis du řnsker at lagre data pĺ en "
-"separat partition, skal du ogsĺ vćlge en '/home' (kun muligt hvis du har "
-"mere end én Linux-partition). \n"
-"Hver partition er listet som fřlger: 'Navn', 'Kapacitet'.\n"
-"\n"
-"'Navn' er kodet som fřlger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-" * 'a' betyder 'hoved-drev pĺ den primćre IDE controller',\n"
-"\n"
-" * 'b' betyder 'slave-drev pĺ den primćre IDE controller',\n"
-"\n"
-" * 'c' betyder 'hoved-drev pĺ den sćkundćre IDE controller',\n"
-"\n"
-" * 'd' betyder 'slave-drev pĺ den sćkundćre IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'fřrste drev', 'b' betyder det 'andet drev', "
-"osv."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux installationen er fordelt pĺ flere cdrom-er. DrakX véd om en "
-"valgt pakke ligger pĺ en anden cdrom og vil udskyde den aktuelle cd og bede "
-"dig om at isćtte en anden, om nřdvendigt."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Det er nu tid til at angive hvilke pakker du vil installere pĺ dit system. "
-"Der er tusindvis af pakker til dit Mandrake Linux system, og det forventes "
-"ikke at du kender dem allesammen udenad.\n"
-"\n"
-"Hvis du udfřrer en standard-installation fra cdrom vil du fřrst blive bedt "
-"om at angive de cd-er som du har nu (kun i ekspert-version). Tjek navnene pĺ "
-"cd'erne og fremhćv boksene svarende til de cd-er du har liggende for "
-"installationen. Klik O.k. nĺr du er klar til at fortsćtte.\n"
-"\n"
-"Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
-"maskine. Grupperne selv er ordnet i 4 grupper:\n"
-"\n"
-" * 'Arbejdsstation': Hvis din maskine skal bruges som en arbejdsstation, "
-"vćlg da en eller flere af de tilsvarende grupper.\n"
-"\n"
-" * 'Udvikling': hvis maskinen skal bruges til programmering vćlg da de "
-"řnskede grupper.\n"
-"\n"
-" * 'Server': hvis det er planen at maskinen skal vćre en server, er du her i "
-"stand til at vćlge de mest almindelige tjenester, som du řnsker at se "
-"installeret pĺ maskinen.\n"
-"\n"
-" * 'Grafisk miljř': Endelig skal du vćlge foretrukne grafiske miljř. Vćlg "
-"mindst ét, hvis du řnsker at have en grafisk arbejdsstation!\n"
-"\n"
-"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om "
-"denne gruppe. Hvis du ikke vćlger nogen grupper ved installation (i "
-"modsćtning til opgradering), vil en dialog komme frem som foreslĺr dig "
-"forskellige former for minimal installation: \n"
-"\n"
-" * 'Med X' Installerer de fćrrest mulige pakker for at fĺ en fungerende "
-"grafisk arbejdsstation;\n"
-"\n"
-" * 'Med basal dokumentation' Installerer det basale system plus basale "
-"nytteprogrammer og tilhřrende dokumentation. Denne installation er passende "
-"til at sćtte en server op.\n"
-"\n"
-" * 'Mindst mulige installering' Vil installere den mindst mulige nřdvendigt "
-"for at fĺ et virkende Linux-system kun med kommandolinjer. Denne "
-"installation fylder omkring 65 Mb.\n"
-"\n"
-"Du kan afkrydse boksen 'Individuelt pakkevalg', hvilket er nyttigt, hvis du "
-"kender de tilbudte pakker godt, eller hvis du řnsker at have fuld kontrol "
-"over hvad der skal installeres.\n"
-"\n"
-"Hvis du har startet installationen i 'Opdatering'-tilstand, kan du fravćlge "
-"alle grupper for at undgĺ at installere nogen nye pakker. Dette er nyttigt "
-"ved reparation eller opdatering af det eksisterende system."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Endelig, afhćngigt af om du valgte at udvćlge individuelle pakker eller ej, "
-"vil du blive prćsenteret for et trć med alle pakker opdelt i grupper og "
-"undergrupper. Under gennembladring af trćet kan du udvćlge hele grupper, "
-"undergrupper eller bare pakker.\n"
-"\n"
-"Hver gang du udvćlger en pakke i trćet vil en beskrivelse fremkomme til "
-"hřjre. Nĺr du har afsluttet dine udvćlgelser, sĺ klik pĺ Installér-knappen. "
-"Sĺ begynder selve installationen. Afhćngig af din maskines hurtighed og "
-"antal pakker som skal installeres kan det tage et stykke tid at gřre "
-"processen fćrdig. Et skřn pĺ tiden det tager for fćrdiggřrelse vises pĺ "
-"skćrmen, sĺ du kan se om der skulle vćre tid til at nyde en kop kaffe.\n"
-"\n"
-"I tilfćldet af at en server-pakke er blevet valgt enten med vilje, eller "
-"fordi den var en del af en hel gruppe, vil du blive spurgt om du virkelig "
-"řnsker at installere disse servere. Under Linux Mandrake bliver installerede "
-"servere startet op ved opstart af maskinen. Selvom de er sikre og ikke har "
-"nogen kendte problemer pĺ udgivelsestidspunktet for distributionen, er det "
-"muligt at sikkerhedshuller opdages efter at denne version af Mandrake Linux "
-"blev fćrdiggjort. Specielt hvis du ikke véd hvad det er for noget, sĺ klik "
-"Nej her. Et klik med Ja her vil installere de nćvnte servere og de vil som "
-"standard blive startet automatisk!\n"
-"\n"
-"Automatiske afhćngigheder-valget deaktiverer simpelthen advarselsdialogen, "
-"som vises hver gang installeringsprogrammet automatisk vćlger en pakke. "
-"Dette sker fordi det er blevet beregnet at den er krćvet for at "
-"tilfredsstille en afhćngighed fra en anden pakke for at kunne fćrdiggćre en "
-"vellykket installation.\n"
-"\n"
-"Det klejne disketteikon i bunden af listen muliggřr indlćsning af en "
-"pakkeliste udvalgt ved en tidligere installation. Klik pĺ denne ikon vil "
-"bede dig om at indsćtte en diskette tidligere frembragt ved slutningen pĺ en "
-"anden installation. Se rĺd nr to i det sidste trin for hvordan en sĺdan "
-"diskette kan laves."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Du bliver nu foreslĺet at opsćtte din internet- eller netvćrksopkobling. "
-"Hvis du vil forbinde din maskine til internettet eller til et lokalnetvćrk "
-"sĺ klik pĺ 'O.k.'. Den automatiske opdagelse af netvćrksenheder og modem vil "
-"blive startet. Hvis opdagelsen mislykkes sĺ fjern markering i boksen 'Brug "
-"automatisk detektion' nćste gang. Du kan ogsĺ vćlge at ikke konfigurere "
-"netvćrket, eller gřre det senere; i sĺ tilfćlde skal du bare klikke pĺ "
-"'Annullér'-knappen.\n"
-"\n"
-"Mulige forbindelser er: almindeligt modem, ISDN-modem, ADSL-forbindelse, "
-"kabel-modem, og endelig en simpel LAN-forbindelse (Ethernet).\n"
-"\n"
-"Vi vil ikke her gĺ i detaljer med hver konfiguration. Men forsikr dig om, at "
-"du har alle parametrene fra din internetudbyder eller systemadministrator.\n"
-"\n"
-"Du kan lćse i kapitlet i hĺndbogen omkring internetforbindelser om detaljer "
-"omkring konfigureringen, eller simpelthen vente til dit system er "
-"installeret og sĺ bruge programmet beskrevet dér til at konfigurere din "
-"forbindelse.\n"
-"\n"
-"Hvis du vil konfigurere netvćrket senere efter installationen, eller hvis du "
-"har afsluttet konfigureringen af din netvćrksforbindelse, vćlg da 'Fćrdig'."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Du kan nu vćlge hvilke tjenester du řnsker skal startes ved opstart af "
-"maskinen.\n"
-"\n"
-"Her prćsenteres alle de tjenester, som er med i den aktuelle installation. "
-"Gennemse dem omhyggeligt og vćlg dem fra som ikke altid er nřdvendige ved "
-"opstarten.\n"
-"\n"
-"Du kan fĺ en kort forklarende tekst om en tjeneste ved at vćlge en bestemt "
-"tjeneste. Hvis du ikke er sikker pĺ om en tjeneste er nyttig eller ej, er "
-"det dog sikrere at bruge den foreslĺede opfřrsel.\n"
-"\n"
-"Vćr specielt varsom pĺ dette trin hvis du planlćgger at bruge maskinen som "
-"server: du vil formentlig řnske ikke at starte nogensomhelst tjeneste op som "
-"du ikke har brug for. Husk at adskillige tjenester kan vćre farlige hvis de "
-"er aktiveret pĺ en server. Vćlg som hovedregel kun de tjenester som du "
-"virkelig behřver."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux hĺndterer tiden i GMT (Greenwich Mean Time) og oversćtter den til "
-"lokal tid ifřlge den tidszone du har valgt. Det er imidlertid muligt at "
-"deaktivere dette ved at fravćlge 'Maskinens ur sat til GMT' sĺ maskinens ur "
-"er det samme som systemets ur. Dette er nyttigt nĺr maskinen ogsĺ bruges til "
-"andre operativsystemer som Windows.\n"
-"\n"
-"Muligheden 'Automatisk tidssynkronisering' vil automatisk tilpasse uret ved "
-"at forbinde til en ekstern tidsserver pĺ internettet. Vćlg en server der "
-"ligger tćt pĺ dig i listen der prćsenteres. Selvfřlgelig skal du have en "
-"fungerende internetforbindelse for at denne facilitet kan fungere. Den vil "
-"faktisk installere en tidsserver pĺ din maskine, som om řnsket kan bruges af "
-"andre maskiner pĺ dit lokalnetvćrk."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (for X-vinduessystem) er hjertet af GNU/Linux' grafiske grćnseflade, "
-"hvilket alle de grafiske miljřer (KDE, Gnome, AfterStep, WindowMaker)...), "
-"som kommer med Mandrake Linux, bygger pĺ. I dette afsnit vil DrakX forsřge "
-"at konfigurere X automatisk.\n"
-"\n"
-"Det er meget sjćldent at dette mislykkes for DrakX, med mindre maskinellet "
-"er meget gammelt (eller meget nyt). Hvis det lykkes, vil DrakX starte X "
-"automatisk med den bedst mulige oplřsning afhćngig af skćrmens střrrelse. Et "
-"vindue vil sĺ komme frem og spřrge om du kan se det.\n"
-"\n"
-"Hvis du laver en ekspert-installering, vil du komme ind i X-konfigurerings- "
-"vejlederen. Se det tilhřrende afsnit af manualen for yderligere oplysning om "
-"denne vejleder.\n"
-"\n"
-"Hvis du kan se beskeden under afprřvningen, og svarer Ja, sĺ vil DrakX "
-"fortsćtte til det nćste trin. Hvis du ikke kan se beskeden, betyder det "
-"simpelthen at konfigurationen var forkert, og testen vil automatisk "
-"afsluttes efter 10 sekunder, og genfremvise skćrmen."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Mĺske er du ikke sćrligt tilfreds med det fřrste forsřg med X konfigurering "
-"(skćrmen for lille, flyttet til venstre eller hřjre...). Derfor vil DrakX "
-"spřrge dig om konfigurationen passer dig, selvom X starter op korrekt. DrakX "
-"vil ogsĺ foreslĺ ćndringer ved at vise en liste af gyldige tilstande som den "
-"kunne finde, og sĺ bede dig om at vćlge én. \n"
-"Som en sidste udvej, hvis du stadig ikke kan fĺ X til at virke, vćlg da Ćndr "
-"grafikkort, vćlg Ukendt kort, og nĺr du bliver spurgt om hvilken server du "
-"vil have, vćlg da FBDev. Dette er en fejlsikker mulighed som virker med alle "
-"moderne grafikkort. Vćlg derefter Test igen for at vćre sikker."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Til sidst vil du blive spurgt om du řnsker at se den grafiske grćnseflade "
-"ved opstart. Bemćrk at du vil blive spurgt om dette selvom du har valgt ikke "
-"at afprřve konfigurationen. Selvfřlgelig vil du řnske at svare Nej, hvis din "
-"maskine skal bruges som server, eller hvis ikke lykkedes dig at fĺ skćrmen "
-"konfigureret."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux-cdrommen har en indbygget rednings-tilstand. Du kan fĺ fat i "
-"denne ved at starte op fra cdrommen, trykke 'F1'-tasten ved opstart, og "
-"indtaste 'rescue' ved opstartsledeteksten. Men i tilfćlde af at din maskine "
-"ikke kan starte op fra cdrommen, břr du komme tilbage til dette trin for "
-"hjćlp i mindst to situationer:\n"
-"\n"
-" * ved installering af opstartsindlćseren vil drakX genskrive "
-"opstartssektoren (MBR) pĺ din hoveddisk (medmindre du bruger en anden "
-"opstartshĺndterer) sĺ du kan starte enten Windows eller GNU/Linux (forudsat "
-"du har Windows pĺ dit system). Hvis du har brug for at geninstallere "
-"Windows, vil Microsoft installeringsprocessen overskrive opstartssektoren, "
-"og sĺ vil du ikke vćre i stand til at starte GNU/Linux!\n"
-"\n"
-" * Hvis der opstĺr et problem, og du ikke kan starte GNU/Linux op fra "
-"harddisken, vil denne diskette vćre den eneste mĺde at starte GNU/Linux op "
-"pĺ. Den indeholder et pćnt antal systemvćrktřjer til at genskabe et system "
-"som er gĺet ned pga. strřmsvigt, en uheldig tastefejl, en skrivefejl i en "
-"adgangskode, eller nogen anden ĺrsag.\n"
-"\n"
-"Nĺr du klikker pĺ dette trin, vil du blive bedt om at indsćtte en diskette i "
-"drevet. Disketten du indsćtter skal vćre tom eller kun indeholde data som du "
-"ikke har brug for. Du behřver ikke formatere den, da drakX vil overskrive "
-"hele disketten."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Nu skal du vćlge hvor pĺ din harddisk du vil installere dit Mandrake Linux-"
-"operativsystem. Hvis disken er tom eller et eksisterende operativsystem "
-"bruger alt pladsen pĺ den, bliver du nřdt til at partitionere den. "
-"Partitionering vil sige at disken deles i logiske dele for at gřre plads til "
-"dit nye Mandrake Linux-system.\n"
-"\n"
-"Da en partitionering normalt ikke kan fortrydes kan det godt vćre "
-"frustrerende og stressende for nybegyndere. Heldigvis er der en vejleder som "
-"forenkler denne proces. Fřr du begynder studér da i manualen og tag den tid "
-"du skal bruge.\n"
-"\n"
-"Hvis du křrer installeringen i ekspert-tilstand kommer du ind i Mandrake "
-"Linux' partitioneringsvćrktřj, DiskDrake. Dette vil lade dig finindstille "
-"dine partitioner. Se kapitlet om DiskDrake i manualen. Fra installations-"
-"grćnsefladen kan du bruge de vejledere som beskrevet her ved at klikke "
-"knappen 'Vejleder' pĺ grćnsefladen.\n"
-"\n"
-"Hvis partitionerne allerede er definerede (fra en tidlige installation eller "
-"fra et andet partitions-vćrktřj), skal du bare vćlge dem for at installere "
-"dit Linux system\n"
-"\n"
-"Hvis partitionerne ikke er lavet endnu, bliver du nřdt til at oprette dem "
-"ved brug af vejlederen. Afhćngig af din disks konfiguration er flere "
-"muligheder tilstede:\n"
-"\n"
-" * 'Brug fri plads': Dette vil simpelthen fřre til en automatisk opdeling af "
-"den ledige diskplads. Du vil ikke blive spurgt om mere.\n"
-"\n"
-" * 'Brug eksisterende partition': vejlederen har fundet en eller flere "
-"eksisterende Linux-partitioner pĺ din harddisk. Hvis du vil bruge dem, sĺ "
-"vćlg denne mulighed.\n"
-"\n"
-" * 'Brug den fri plads pĺ Windows-partitionen': hvis Microsoft Windows er "
-"installeret pĺ din disk og bruger al pladsen, bliver du nřdt til at lave "
-"plads til Linux. For at gřre det kan du slette dine Microsoft Windows "
-"partitioner og data (se \"Slet hele disken\" eller \"Ekspert niveau\" ) "
-"eller ćndre střrrelsen pĺ din Microsoft Windows-partition. "
-"Střrrelsesćndringen kan fortages uden tab af data. Denne lřsning er "
-"anbefalet hvis du vil bruge bĺde Mandrake Linux og Microsoft Windows pĺ "
-"samme maskine.\n"
-"\n"
-" Fřr du vćlger denne lřsning, břr du forstĺ at střrrelsen pĺ din Microsoft "
-"Windows partition vil blive mindre end den er nu. Det betyder at du vil have "
-"mindre fri plads under Microsoft Windows til at gemme din data eller "
-"installere nyt programmel.\n"
-"\n"
-" * 'Slet hele disken': hvis du vil slette alle data pĺ alle partitioner pĺ "
-"denne disk og erstatte dem med dit nye Mandrake Linux-system, kan du vćlge "
-"denne mulighed. Vćr forsigtig med denne lřsning, du vil ikke vćre i stand "
-"til at fortryde dine ćndringer efter at du har sagt ja.\n"
-"\n"
-" !! Hvis du bruger denne mulighed vil alle data pĺ din disk gĺ tabt. !!\n"
-"\n"
-" * 'Fjern Windows': dette vil simpelthen slette alt pĺ disken og begynde fra "
-"en frisk, og partitionere fra ny. Alle data pĺ din disk vil gĺ tabt.\n"
-"\n"
-" !! Hvis du bruger denne mulighed vil alle data pĺ din disk gĺ tabt. !!\n"
-"\n"
-" * 'Ekspert-modus': hvis du vil partitionere disken i hĺnden, kan du vćlge "
-"dette alternativ. Vćr forsigtig fřr du vćlger denne lřsning. Den giver dig "
-"mange muligheder, men er ogsĺ farlig. Du kan meget nemt komme til at slette "
-"alle dine data. Sĺ lad vćre med at vćlge den lřsning med mindre du véd hvad "
-"du gřr."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Vćrsgo'. Installationen en nu fćrdig og dit GNU/Linux-system er nu klar til "
-"brug. Klik bare O.k. for at genstarte systemet. Du kan starte GNU/Linux "
-"eller Windows, som du foretrćkker det (hvis du har to systemer), sĺ snart "
-"din maskine er startet op igen.\n"
-"\n"
-"Avanceret-knappen viser to ekstra knapper for at:\n"
-"\n"
-" * generere en auto-installeringsdiskette: for at oprette en installerings- "
-"diskette som automatisk vil udfřre en hel installation uden hjćlp fra en "
-"operatřr, magen til den installation du lige har konfigureret.\n"
-"\n"
-" Bemćrk at to forskellige muligheder er tilstede efter klik pĺ knappen:\n"
-"\n"
-" * Genafspil: Dette er en delvist automatiseret installering da "
-"partitioneringstrinnet (og kun dette trin) forbliver interaktiv.\n"
-"\n"
-" * Automatisk: Fuldautomatisk installering: harddisken bliver fuldstćndig "
-"genoverskrevet, alle data forsvinder.\n"
-"\n"
-" Denne facilitet er meget nyttig ved installering af et stort antal ens "
-"maskiner. Se afsnittet om autoinstallering pĺ vores websted.\n"
-"\n"
-" * Gem pakkevalg(*): Gemmer pakkevalget som lavet tidligere. Sĺ nĺr en ny "
-"installering laves, kan disketten indsćttes i drevet og installeringen kan "
-"křres ved at bruge F1 pĺ hjćlpeskćrmen idet der indtastes >>linux defcfg="
-"\"floppy\"<<.\n"
-"\n"
-"(*) Du skal have en diskette formateret til FAT (denne oprettes i GNU/Linux "
-"ved at skive \"mformat a:\")"
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Enhver partition der netop er blevet defineret, skal formateres til brug "
-"(formatering betyder oprettelse af et filsystem).\n"
-"\n"
-"Nu kan du ogsĺ řnske at omformatere nogle allerede eksisterende partitioner "
-"for at slette de data som de indeholder. Hvis du řnsker dette, sĺ markér "
-"ogsĺ de partitioner som du řnsker at formatere.\n"
-"\n"
-"Bemćrk at det ikke er nřdvendigt at omformatere alle allerede eksisterende "
-"partitioner. Det er nřdvendigt at omformatere de partitioner, der indeholder "
-"operativsystemet (sĺsom '/', '/usr' og '/var', men du er ikke nřdt til at "
-"omformatere partitioner som du řnsker at beholde (typisk /home).\n"
-"\n"
-"Vćr forsigtig med valg af partitioner; efter formatering vil alle data vćre "
-"slettede pĺ de valgte partitioner, og du vil ikke kunne redde nogetsomhelst "
-"af det.\n"
-"\n"
-"Klik pĺ 'Ok' nĺr du er klar til at formatere partitioner.\n"
-"\n"
-"Klik pĺ 'Annullér' hvis du řnsker at vćlge andre partitioner til at "
-"installere dit nye Mandrake Linux operativsystem.\n"
-"\n"
-"Klik pĺ 'Avanceret' for at vćlge partitioner som du řnsker at tjekke for "
-"dĺrlige blokke."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Dit nye Mandrake Linux styresystem er i fćrd med at blive installeret. "
-"Afhćngig af det antal pakker, du installerer og hastigheden pĺ din maskine "
-"kan dette tage fra nogen fĺ minutter til en del lćngere tid. \n"
-"Hav venligst tĺlmodighed med dette."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Pĺ det tidspunkt hvor du installerer Mandrake Linux er det sandsynligt at "
-"nogen af pakkerne er blevet opdaterede siden den oprindelige udgivelse. "
-"Nogle fejl er mĺske blevet rettet, og sikkerhedsproblemer mĺske lřst. Vi "
-"foreslĺr dig at hente disse ned fra internettet for at disse opdateringer "
-"kan komme dig til gode. Vćlg 'Ja' hvis du har en fungerende internet- "
-"forbindelse eller 'Nej' hvis du foretrćkker at installere opdaterede pakker "
-"senere.\n"
-"\n"
-"Valg af 'Ja' viser en liste af steder hvorfra opdateringer kan hentes. Vćlg "
-"en der er nćr ved dig. Sĺ vil et trć med pakkevalg fremkomme: gennemse "
-"valget og tryk 'Installér' for at modtage og installere den valgte pakke "
-"eller 'Annullér'for at afbryde."
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Fřr du gĺr videre břr du lćse betingelserne i licensen omhyggeligt. Den "
-"omfatter hele Mandrake Linux distributionen, og hvis du ikke er enig i alle "
-"betingelserne i den, sĺ klik pĺ 'Nćgt'-knappen. Det vil řjeblikkeligt "
-"afslutte installationen. For at fortsćtte installationen skal du klikke pĺ "
-"'Acceptér'-knappen."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nu er det tid til at vćlge det řnskede sikkerhedsniveau for maskinen. "
-"Hovedreglen er at jo mere kendt maskinen er, og jo vigtigere data er, des "
-"hřjere břr sikkerhedsniveauet vćre. Men et hřjere sikkerhedsniveau vindes "
-"normalt pĺ bekostning af letheden af anvendelsen. Kig i kapitlet MSEC i "
-"referencehĺndbogen for mere information om betydningen af niveauerne.\n"
-"\n"
-"Hvis du ikke véd hvad du skal vćlge, sĺ behold den foreslĺede mulighed."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nu skal du vćlge hvor Mandrake Linux skal installeres. Hvis partitionerne "
-"allerede er lavet, enten fra en tidligere installation af GNU/Linux eller "
-"fra et andet partitioneringsvćrktřj), kan du bruge dem. Ellers skal disk-"
-"partitionerne laves fřrst.\n"
-"\n"
-"For at lave partitioner skal du fřrst vćlge en harddisk. Du kan vćlge disken "
-"der skal partitioneres ved at trykke pĺ \"hda\" for den fřrste IDE disk, "
-"\"hdb\" for den anden eller \"sda\" for den fřrste SCSI disk og sĺ videre.\n"
-"\n"
-"For at partitionere den valgte disk kan du bruge disse muligheder:\n"
-"\n"
-" * 'Slet alt': Dette valg sletter alle partitioner pĺ den valgte disk.\n"
-"\n"
-" * 'Allokér automatisk': dette valg tillader dig automatisk at lave Ext2 og "
-"swappartitioner pĺ den fri plads pĺ din disk.\n"
-"\n"
-"* 'Mere': giver adgang til flere faciliteter:\n"
-"\n"
-" * 'Gem partitionstabel': Gemmer din partitionstabel pĺ en diskette. "
-"Nyttigt ved senere redning af partitionstabellen, om nřdvendigt. Det er "
-"stćrkt anbefalet at bruge dette trin.\n"
-"\n"
-" * 'Genskab partitionstabel': lader dig genskabe en tidligere gemt "
-"partitionstabel fra diskette.\n"
-"\n"
-" * 'Red partitionstabel': hvis din partitionstabel er beskadiget, kan du "
-"prřve at redde den med denne mulighed. Vćr forsigtig og husk at det kan slĺ "
-"fejl.\n"
-" * 'Automatisk montering af flytbart medie': fravalg af denne mulighed "
-"vil tvinge brugere til at manuelt montere og afmontere media sĺsom disketter "
-"og cdrommer.\n"
-"\n"
-" * 'Vejleder': Hvis du řnsker at bruge vejlederen til at partitionere din "
-"disk, kan du bruge denne mulighed. Dette anbefales, hvis du ikke har det "
-"store kendskab til partitionering.\n"
-"\n"
-" * 'Fortryd': Du kan bruge denne mulighed for at annullere dine ćndringer.\n"
-"\n"
-" * 'Skift mellem normal og ekspert-version': giver mulighed for flere "
-"handlinger med partitioner (type, valgmuligheder, format) og giver mere "
-"information.\n"
-"\n"
-" * 'Fćrdig': nĺr du er fćrdig med partitionering af din disk, dette vil "
-"skrive ćndringerne tilbage pĺ disken.\n"
-"\n"
-"Bemćrk: du kan nĺ alle mulighederne ved at bruge tastaturet: navigér gennem "
-"partitionerne med Tab og op- og ned-pilene.\n"
-"\n"
-"Nĺr en partition er valgt kan du bruge:\n"
-"\n"
-" * Ctrl-c for at lave en ny partition (Nĺr en tom partition er valgt);\n"
-"\n"
-" * Ctrl-d for at slette en partition;\n"
-"\n"
-" * Ctrl-m for at sćtte et monteringssti.\n"
-"\n"
-"For at fĺ information om de forskellige tilgćngelige filsystemstyper kan du "
-"lćse kapitlet ext2fs i 'Referencemanualen'.\n"
-"\n"
-"Hvis du er i gang med at installere pĺ en PPC-maskine skal du lave en lille "
-"HFS-'bootstrap'-partition pĺ mindst 1MB til Yaboot-systemstarteren. Hvis du "
-"vćlger at lave partitionen en smule střrre, f.eks. 50MB kan den vćre nyttig "
-"til at gemme en ekstra kerne og ramdisk-billede for nřdsituationer ved "
-"opstart."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mere end én Microsoft Windows partition er blevet genkendt pĺ dit diskdrev. "
-"Vćlg den som du řnsker at ćndre střrrelse pĺ for at kunne installere dit nye "
-"Mandrake Linux operativsystem.\n"
-"\n"
-"Hver partition er listet som fřlger: 'Linux navn', 'Windows navn', "
-"'Kapacitet'.\n"
-"\n"
-"'Linux navn' er kodet som fřlger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-" * 'a' betyder 'hoved-drev pĺ den primćre IDE controller',\n"
-"\n"
-" * 'b' betyder 'slave-drev pĺ den primćre IDE controller',\n"
-"\n"
-" * 'c' betyder 'hoved-drev pĺ den sćkundćre IDE controller',\n"
-"\n"
-" * 'd' betyder 'slave-drev pĺ den sćkundćre IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'fřrste drev', 'b' betyder det 'andet drev', "
-"osv.\n"
-"\n"
-"'Windows navn' er det bogstav som dit drev har under Windows (den fřrste\n"
-"disk eller partition kaldes 'C:')."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Hold ud! Dette kan tage adskillige minutter."
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX skal nu vide om du vil udfřre en standard-installation ('Anbefalet'), "
-"eller om du řnsker at have střrre kontrol ('Ekspert'). Du kan ogsĺ vćlge om "
-"du řnsker at udfřre en nyinstallering eller en opgradering af et "
-"eksisterende Mandrake Linux-system. \n"
-"\n"
-"* 'Installér' udraderer helt det gamle system. Afhćngigt af hvad der i "
-"řjeblikket er pĺ din maskine vil du dog kunne beholde nogen gamle "
-"partitioner (Linux eller andet) ućndret.\n"
-"\n"
-"* 'Opgradér' Denne installationsklasse tillader simpel opdatering af de "
-"pakker der i řjeblikket er installeret pĺ dit Mandrake Linux-system. Den "
-"beholder de nuvćrende partitioner pĺ dine diskdrev sĺ vel som opsćtningen af "
-"brugere. Alle andre konfigurationstrin forbliver mulige som for almindelig "
-"installation.\n"
-"\n"
-"* 'Opgradér kun pakker' Denne spritnye installationsklasse kan opgradere et "
-"eksisterende Linux Mandrake-system idet al systemkonfiguration beholdes "
-"ućndret. Tilfřjelse af nye pakker til den nuvćrende installation vil ogsĺ "
-"vćre muligt.\n"
-"\n"
-"Afhćngig af din viden om GNU/Linux kan du vćlge et af de fřlgende:\n"
-"\n"
-"* Anbefalet: hvis du aldrig har installeret et GNU/Linux-operativsystem sĺ "
-"vćlg dette. Installationen vil vćre meget nem og du vil kun blive stillet "
-"nogen fĺ spřrgsmĺl.\n"
-"\n"
-"* Ekspert: hvis du har en god viden om GNU/Linux, kan du vćlge denne "
-"installationsklasse. Ekspertinstallationen vil lade dig lave en meget "
-"tilpasset installation. Besvarelse af nogen af spřrgsmĺlene kan vćre meget "
-"svćrt hvis du ikke har sĺ godt et kendskab til GNU/Linux, sĺ lad vćre med at "
-"vćlge dette, medmindre du véd hvad du laver."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalt vil drakX have valgt det rigtige tastatur til dig (afhćngigt af "
-"sproget du har valgt) og du vil sĺ ikke se dette trin. Men du har mĺske "
-"ikke et tastatur som svarer nřjagtigt til dit sprog: for eksempel hvis du "
-"er en engelsktalende svejtser, vil du mĺske stadig řnske at dit tastatur "
-"skal vćre et svejtsisk tastatur. Eller hvis du taler engelsk men bor i "
-"Québec, er du mĺske i samme situation. I begge tilfćlde mĺ du gĺ tilbage "
-"til dette installationstrin og vćlge et passende tastatur fra listen.\n"
-"\n"
-"Klik pĺ 'mere'-tasten for at blive prćsenteret for den fulde \n"
-"liste af understřttede tastaturer."
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Vćlg dit foretrukne sprog for brug under installation og pĺ systemet. \n"
-"Der er en Avanceret-knap som lader dig vćlge andre sprog, der installeres "
-"pĺ maskinen. Valg af andre sprog vil installere de sprogspecifikke filer for "
-"systemdokumentation og programmer. Hvis du for eksempel vil bevćrte folk fra "
-"Spanien pĺ din maskine, vćlg da engelsk som hovedsproget i trć-visningen, og "
-"afkryds sĺ i den avancerede afdeling boksen svarende til spansk|Spanien.\n"
-"\n"
-"Bemćrk at flere sprog kan installeres samtidigt. Nĺr du er fćrdig med at "
-"vćlge yderligere sprog, sĺ klik O.k. for at fortsćtte."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Normalt antager drakX at du har en to-knapsmus og vil lave en opsćtning hvor "
-"den tredje knap emuleres. DrakX vil automatisk vide om den er PS/2, seriel "
-"eller USB.\n"
-"\n"
-"Hvis du řnsker en anden type mus, vćlg da den rigtige type mus fra den viste "
-"liste.\n"
-"\n"
-"Hvis du vćlger en mus forskellig fra den forvalgte, vil du blive prćsenteret "
-"for en skćrm for museafprřvning. Brug knapperne og hjulet for at efterprřve, "
-"om indstillerne er gode. Hvis musen ikke virker korrekt, tryk da pĺ "
-"mellemrumstangenten eller vognretur for at 'Annullere' og vćlg forfra."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vćlg den rigtige port. For eksempel er navnet for COM1-porten under MS "
-"Windows 'ttyS0' under GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux- "
-"system: Du skal indtaste din root-adgangskode. Root er systemadministratoren "
-"og er den eneste der har lov til at lave opdateringer, tilfřje brugere, "
-"ćndre i den overordnede systemkonfiguration og sĺ videre. Kort sagt, root "
-"kan gřre alt! Derfor skal du vćlge en adgangskode der er svćr at gćtte - "
-"DrakX vil fortćlle dig hvis det er for nemt. Som víst kan du vćlge ikke at "
-"indtaste en adgangskode, men vi advarer dig pĺ det kraftigste mod dette, om "
-"ikke andet med én begrundelse: tro ikke at fordi du startede GNU/Linux op, "
-"sĺ er dine andre operativsystemer velforvarede. Da root kan overvinde alle "
-"forhindringer og uforvarende slette alle data pĺ partitioner ved sorglřst at "
-"behandle partitionerne selv, er det vigtigt at det er vanskeligt at blive "
-"root.\n"
-"\n"
-"Adgangskoden břr vćre en blanding af bogstaver og tal og mindst 8 tegn "
-"langt. Skriv aldrig en adgangskode ned for root - det gřr det for nemt at "
-"bryde ind i et system.\n"
-"\n"
-"Gřr dog ikke adgangskoden for lang eller kompliceret da du skal vćre i stand "
-"til at huske den uden for stort besvćr.\n"
-"\n"
-"Adgangskoden vil ikke blive vist pĺ skćrmen nĺr du indtaster den. Du skal "
-"derfor indtaste adgangskoden to gange, for at begrćnse risikoen for "
-"tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil "
-"denne 'ukorrekte' adgangskode vćre krćvet nĺr du forbinder dig til "
-"systemet.\n"
-"\n"
-"I ekspert-tilstand vil du blive spurgt om du vil koble op til en "
-"autenticerings-server, som NIS eller NDAP.\n"
-"\n"
-"Hvis dit netvćrk bruger LDAP (eller NIS)-protokollen til autentificering, "
-"vćlg da LDAP (eller NIS). Hvis du ikke véd det, sĺ spřrg din "
-"systemadministrator.\n"
-"\n"
-"Hvis din maskine ikke er forbundet til noget administreret netvćrk, řnsker "
-"du nok at vćlge Lokale filer for autentificering"
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO og GRUB er opstartsindlćsere for GNU/Linux. Dette trin er normalt helt "
-"automatiseret. Faktisk vil drakX analysere opstartsektoren pĺ disken og vil "
-"handle ud fra dette, afhćngig af hvad den finder hér:\n"
-"\n"
-" * Hvis den finder en Windows opstartssektor vil den erstatte den med en "
-"GRUB/LILO opstartssektor, sĺ du kan starte GNU/Linux eller et andet "
-"operativsystem;\n"
-"\n"
-" * Hvis den finder en GRUB eller LILO opstartssektor vil den erstatte den "
-"med en ny;\n"
-"\n"
-"Hvis den er i tvivl vil drakX vise en dialog med forskellige muligheder.\n"
-"\n"
-" * 'Opstartsindlćser der bruges': du fĺr her tre muligheder:\n"
-"\n"
-" * 'GRUB': hvis du foretrćkker GRUB (tekstmenu).\n"
-"\n"
-" * 'LILO med grafisk menu': hvis du foretrćkker LILO med "
-"grafikgrćnseflade.\n"
-"\n"
-" * 'LILO med tekstmenu': hvis du foretrćkker LILO med tekstgrćnseflade.\n"
-"\n"
-" * 'Opstartsenhed': I de fleste tilfćlde vil det ikke vćre nřdvendigt at "
-"ćndre standard (/dev/hda), men hvis du foretrćkker det, kan "
-"opstartsindlćseren installeres pĺ det andet diskdrev (/dev/hdb), eller endda "
-"pĺ en diskette (/dev/fd0).\n"
-"\n"
-" * 'Forsinkelse fřr opstart af standardsystem': Ved genstart af maskinen er "
-"dette den tid der gives til brugeren til at vćlge en anden opstartsindgang "
-"end standard i opstartsindlćserens menu.\n"
-"\n"
-"Vćr opmćrksom pĺ at hvis du vćlger ikke at installere en opstartsindlćser "
-"(ved at vćlge 'Annullér' hér), skal du vćre sikker pĺ at du har en anden "
-"mĺde at starte dit Mandrake Linux-system op pĺ! Vćr ogsĺ sikker pĺ hvad du "
-"gřr hvis du ćndrer nogen af tilvalgene her!\n"
-"\n"
-"Et klik pĺ 'Avanceret'-knappen i denne dialog vil tilbyde mange avancerede "
-"muligheder beregnet til ekspertbrugeren.\n"
-"\n"
-"Efter at du har konfigureret de generelle opstartsindlćserparametre, bliver "
-"du presenteret for listen af opstartsmuligheder som vil vćre tilstede ved "
-"opstarten.\n"
-"\n"
-"Hvis der er et andet operativsystem installeret pĺ din maskine, vil det "
-"automatisk blive tilfřjet til opstartsmenuen. Her kan du vćlge at "
-"finindstille de eksisterende muligheder. Vćlg en indgang og klik pĺ 'Ćndr' "
-"for at ćndre eller fjerne den; 'Tilfřj' opretter en ny indgang; og 'Fćrdig' "
-"fortsćtter til det nćste installationstrin."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOaderen) og GRUB er opstartsindlćsere: de kan starte enten GNU/"
-"Linux eller ethvert andet system op, som ligger pĺ din maskine. Normalt "
-"bliver disse andre operativsystemer fundet korrekt og installeret. Hvis "
-"dette ikke er tilfćldet, kan du lave en indgang i hĺnden med denne skćrm. "
-"Vćr omhyggelig med at vćlge de korrekte parametre.\n"
-"\n"
-"Mĺske vil du ikke řnske at give nogensomhelst adgang til disse andre "
-"operativsystemer. I dette tilfćlde kan du slette de tilsvarende indgange. "
-"Men sĺ har du brug for en opstartsdiskette for at starte disse "
-"operativsystemer!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Det er nřdvendigt at du angiver hvor du řnsker at placere oplysningerne\n"
-"krćvet for at opstarte GNU/Linux.\n"
-"\n"
-"Med mindre du véd prćcist hvad du gřr, břr du vćlge Fřrste sektor pĺ drevet\n"
-"(MBR)."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Her vćlger vi et udskrivningssystem som din maskine skal bruge. Andre "
-"styresystemer tilbyder mĺske ét, men Mandrake tilbyder tre.\n"
-"\n"
-" * 'pdq' - som betyder 'print, don't queue' (udskriv, kř ej), er valget, "
-"hvis du har en direkte forbindelse til din printer, og du řnsker at kunne "
-"klare printproblemer med det samme, og du ikke har nogen printere via "
-"netvćrk. Det vil kun behandle meget simple netvćrkstilfćlde, og er lidt "
-"slřvt pĺ netvćrk. Vćlg 'pdq' hvis dette er din jomfrurejse med GNU/Linux. Du "
-"kan ćndre dit valg efter installeringen ved at křre PrinterDrake fra "
-"Mandrakes Kontrolcenter, og klikke pĺ ekspert-knappen.\n"
-"\n"
-" * 'CUPS' - 'Common Unix Printing System' (Fćlles printersystem for Unix) er "
-"fremragende til at udskrive pĺ din lokale printer, og ogsĺ pĺ den, der stĺr "
-"pĺ den anden side af jordkloden. Det er simpelt, og kan virke som en server "
-"eller klient for det bedagede 'lpd'-printsystem, sĺ det er kompatibelt med "
-"de tidligere systemer. Det kan mange finesser, men den basale opsćtning er "
-"nćsten lige sĺ nem som for 'pdq'. Hvis du har brug for at dette efterligner "
-"en 'lpd'-server, skal du aktivere 'cups-lpd'-dćmonen. Det har grafiske "
-"grćnseflader for udskrivning og valg af printermuligheder.\n"
-"\n"
-" * 'lprNG' - 'line printer daemon New Generation' (ny generation af "
-"linjeprinterdćmonen). Dette system kan gřre omtrent det samme som de andre, "
-"men det vil ogsĺ kunne skrive til et Novell netvćrk, fordi det understřtter "
-"IPX-protokollen, og det kan udskrive direkte til skal-kommandoer. Hvis du "
-"har brug for Novell eller udskrivning til kommandoer uden at bruge en "
-"separat kanaliserings-konstruktion, sĺ brug lprNG. Ellers er CUPS at "
-"foretrćkke, da det er simplere og bedre til at fungere over netvćrk."
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX er nu ved at bestemme alle IDE-enheder der er tilstede pĺ din maskine. "
-"Den vil ogsĺ lede efter en eller flere PCI SCSI-kort pĺ dit system. Hvis et "
-"SCSI-kort findes, vil DrakX automatisk installere en driver til det.\n"
-"\n"
-"Da maskineleftersřgningen nogen gange ikke vil finde et stykke udstyr, vil "
-"DrakX alligevel spřrge dig om du har et SCSI-kort installeret i din maskine. "
-"Du vil blive prćsenteret for en liste af SCSI-kort, som du kan vćlge fra. "
-"Svar Nej hvis du ikke har noget SCSI-udstyr. Hvis du ikke er sikker, kan du "
-"ogsĺ tjekke listen over udstyr i din maskine ved at vćlge Se maskinelinfo og "
-"klikke O.k. Undersřg listen over udstyr og klik sĺ pĺ O.k.-knappen for at "
-"vende tilbage til spřrgsmĺlet om SCSI-udstyr.\n"
-"\n"
-"Hvis du mĺtte angive din kort manuelt, vil DrakX spřrge om du vil "
-"specificere nogle indstillingsmuligheder for den. Du břr dog lade DrakX "
-"spřrge udstyret om opsćtningen. Det virker som regel fint. \n"
-"Hvis DrakX ikke kan fĺ oplysninger om indstillinger ud af udstyret, som skal "
-"bruges til opsćtningen, skal du angive opsćtningsinformation til driveren. "
-"Se i brugervejledningen (kapitel 3, underafsnit \"Collective informations on "
-"your hardware\") om hjćlp med at finde informationen i maskinel-"
-"dokumentationen, fra fabrikantens side (hvis du har Internet adgang) eller "
-"fra Microsoft Windows (hvis du brugte dette udstyr med Windows pĺ dit "
-"system)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Du kan tilfřje flere valgmuligheder for Yaboot, enten til andre "
-"styresystemer, andre kerner, eller til nřd-opstart.\n"
-"\n"
-"For andre styresystemer bestĺr indgangen blot af et navn og rodpartitionen\n"
-"\n"
-"Der er for Linux nogen fĺ valgmuligheder:\n"
-"\n"
-" * Label: dette er simpelthen navnet som du skal indtaste til ledeteksten "
-"fra Yaboot for at vćlge denne opstartsmulighed.\n"
-"\n"
-" * Image: Dette vil vćre navnet pĺ den kerne der skal opstartes. Typisk "
-"vmlinux eller en variation pĺ vmlinux med en endelse.\n"
-"\n"
-" * Root: root enheden eller \"/\" for din Linux installation.\n"
-"\n"
-" * Append: pĺ Apple udstyr bruges kerne-append muligheden ganske ofte til at "
-"hjćlpe med initialisering af billedudstyr, eller til at aktivere emulering "
-"af museknapper for de ofte manglende knap 2 og knap 3 pĺ musen pĺ en typisk "
-"Apple mus. Det fřlgende er nogle eksempler:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: denne mulighed kan bruges enten til at indlćse de fřrste moduler, "
-"fřr opstartsenheden er tilgćngelig, eller til at indlćse en ramdisk ved "
-"opstart i en nřdsituation.\n"
-"\n"
-" * Initrd-size: den almindelige střrrelse pĺ en ramdisk er generelt 4.096 "
-"byte. Hvis du har brug for at udlćgge en stor ramdisk kan denne mulighed "
-"bruges.\n"
-"\n"
-" * Read-write: normalt bliver rod-partitionen fřrst bragt op skrivebeskyttet "
-"for at muliggřre et filsystemstjek fřr systemet gĺr i luften. Her kan du "
-"tilsidesćtte denne opsćtning.\n"
-"\n"
-" * NoVideo: skulle Apple-billedudstyret vise sig at vćre specielt "
-"problemfyldt kan du vćlge denne mulighed for at starte op i 'novideo'-"
-"tilstand, med indbygget rammebufferunderstřttelse.\n"
-"\n"
-" * Default: vćlger denne indgang som vćrende det normale Linux valg, som "
-"vćlges bare ved at trykke RETUR ved yaboots ledetekst. Denne indgang vil "
-"ogsĺ blive fremhćvet med en '*', hvis du trykker Tab for at se "
-"opstartsvalgene."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot er en systemstarter til NewWorld MacIntosh-maskinel. Den kan starte "
-"enten GNU/Linux, MacOS eller MacOSX, hvis de er til stede pĺ din maskine. "
-"Sćdvanligvis vil disse andre styresystemer blive korrekt opdaget og "
-"installeret. Hvis dette ikke skulle vćre tilfćldet kan du her tilfřje en "
-"indgang i hĺnden. Vćr omhyggelig med at vćlge de korrekte parametre.\n"
-"\n"
-"Yaboots hovedvalg er:\n"
-"\n"
-" * Init-besked: En enkel tekstbesked som vises fřr valg af opstart.\n"
-"\n"
-" * Opstartsenhed: Angiver hvor du řnsker at placere informationen som er "
-"nřdvendig for at starte GNU/Linux. Du vil generelt have indstillet en "
-"bootstrap-partition tidligere til at have denne information.\n"
-"\n"
-" * Open firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser "
-"mulige med yaboot. Den fřrste forsinkelse bliver mĺlt i sekunder og du kan "
-"ved det punkt vćlge mellem CD, OF-opstart, MacOS eller Linux.\n"
-"\n"
-" * Ventetid fřr kerneopstart: Denne er lig LILO-opstartsforsinkelsen. Efter "
-"at have valgt Linux vil du have denne ventetid gange 0,1 sekunder fřr din "
-"forvalgte kernebeskrivelse bliver valgt.\n"
-"\n"
-" * Aktivér CD-opstart?: Hvis du vćlger dette valg vil du kunne trykke 'C' "
-"for CD ved det fřrste opstartsvalg.\n"
-"\n"
-" * Aktiver OF-opstart?: Hvis du vćlger dette valg vil du kunne trykke 'N' "
-"for 'Open Firmware' ved det fřrste opstartsvalg.\n"
-"\n"
-" * Forvalgt styresystem: Du kan vćlge hvilket forvalgt styresystem der skal "
-"startes nĺr Open Firmwareforsinkelsen er udlřbet."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Her prćsenteres forskellige parametre relateret til din maskine. Afhćngig af "
-"dit installerede maskinel vil - eller vil du ikke - se de fřlgende "
-"indgange:\n"
-"\n"
-" * 'Mus': tjek den aktuelle musekonfiguration og klik pĺ knappen for om "
-"nřdvendigt at ćndre den.\n"
-"\n"
-" * 'Tastatur': tjek den aktuelle tastaturkonfiguration og klik pĺ knappen "
-"for om nřdvendigt at ćndre den.\n"
-"\n"
-" * 'Tidszone': DrakX gćtter normalt din tidszone fra det sprog, du har "
-"valgt. Men ogsĺ her, som ved valg af tastatur, er du mĺske ikke i det land "
-"som dit sprog indikerer, sĺ du har mĺske brug for at klikke pĺ 'Tidszone'-"
-"knappen sĺ du kan konfigurere uret svarende til den tidszone du er i.\n"
-"\n"
-" * 'Printer': Et klik pĺ 'Ingen printer'-knappen vil ĺbne vejlederen for "
-"printerkonfigurering.\n"
-"\n"
-" * 'Lydkort': Hvis et lydkort er blevet fundet pĺ dit system, vil det blive "
-"vist her. Ingen ćndringer er mulige pĺ installationstidspunktet.\n"
-"\n"
-" * 'Tv-kort': Hvis et tv-kort er blevet fundet pĺ dit system, vil det blive "
-"vist her. Ingen ćndringer er mulige pĺ installationstidspunktet.\n"
-"\n"
-" * 'ISDN-kort': Hvis et ISDN-kort er blevet fundet pĺ dit system, vil det "
-"blive vist her. Du kan klikke pĺ knappen for at ćndre de tilhřrende "
-"parametre."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vćlg det diskdrev som du vil slette for at installere din nye Mandrake Linux "
-"partition. Vćr forsigtig, alle data som er pĺ der, vil gĺ tabt og vil ikke "
-"kunne genskabes!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Klik pĺ 'O.k.' hvis du řnsker at slette alle data og pertitioner der ligger "
-"pĺ dette diskdrev. Vćr omhyggelig, efter klik pĺ O.k. vil du ikke vćre i "
-"stand til at redde nogen data eller partitioner, der ligger pĺ dette "
-"diskdrev, inklusive alle Windows data.\n"
-"Klik pĺ 'Annulér' for at anullere denne handling uden at tabe nogen data og "
-"partitioner der er tilstede pĺ dette diskdrev."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kunne ikke fĺ adgang til kernemoduler svarende til din kerne (fil %s "
-"mangler), dette betyder normalt at din opstartsdiskette ikke stemmer overens "
-"med installationsmediet (lav en nyere opstartsdiskette)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Du skal ogsĺ formatere %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Du har valgt fřlgende servere: %s\n"
-"\n"
-"\n"
-"Disse servere er aktiveret som standard. De har ingen kendte "
-"sikkerhedsproblemer, men nogen nye kan blive fundet. I sĺ tilfćlde skal du "
-"opgradere sĺ snart som mulig.\n"
-"\n"
-"\n"
-"Řnsker du virkelig at installere disse servere?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan ikke bruge rundkastning uden noget NIS-domćne"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Indsćt en tom diskette i diskette-drev %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Denne diskette er ikke formatteret til FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"For at bruge dette gemte pakkevalg, start installationen op med``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fejl ved lćsning af filen %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Noget maskinel pĺ din maskine skal bruge ''proprietćre'' drivere for at "
-"virke.\n"
-"Du kan finde information om dem hos: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du skal have en rod partition. For at fĺ dette, lav en ny partition (eller "
-"vćlg en eksisterende).\n"
-"Vćlg sĺ kommandoen \"Monterings-sti\" og sćt den til `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Du skal tildele en partition til Swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen Swap partition\n"
-"\n"
-"Fortsćt alligevel?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du skal have en FAT-partition monteret under /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Brug fri plads"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok fri plads til at tildele nye partitioner"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Brug eksisterende partition"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Der er ingen eksisterende partition der kan bruges"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Brug Windows partitionen til Loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partition vil du benytte som Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Vćlg střrrelserne"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Rod-partitions střrrelse i Mb: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitions střrrelse i Mb: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Brug den frie plads pĺ Windows-partitionen"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partition řnsker du at ćndre střrrelse pĺ?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Udregner Windows-filsystemets grćnser"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Programmet til at ćndre střrrelse pĺ FAT kan ikke behandle din partition, \n"
-"den fřlgende fejl opstod: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr "Din Windows partition er for fragmenteret, křr 'defrag' fřrst"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX vil nu ćndre střrrelsen pĺ din Windows-partition. Udvis forsigtighed: "
-"denne operation er farlig. Hvis du ikke allerede har gjort det, břr du fřrst "
-"gĺ ud af denne installation, křre scandisk under Windows (og eventuelt "
-"defrag) og sĺ genstarte installationen. Du břr ogsĺ tage en sikkerhedskopi "
-"af dine data. Tryk pĺ Ok, hvis du er helt sikker."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Hvilken střrrelse řnsker du at at beholde Windows pĺ?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT střrrelsesćndring mislykkedes: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at ćndre střrrelse pĺ, eller bruge som loopback "
-"(eller ikke nok plads tilbage)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Slet hele disken"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mere end et diskdrev, hvilken řnsker du at installere Linux pĺ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle eksisterende partitioner og deres data vil gĺ tabt pĺ drev %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Brugerdefineret disk-opdeling"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Brug fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Du kan nu partitionere %s.\n"
-"Nĺr du er fćrdig, sĺ husk at gemme med 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Du har ikke nok fri plads pĺ din Windows-partition"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Kan ikke finde plads til installering"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partitionerings-vejlederen fandt de fřlgende lřsninger:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislykkedes: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Bringer netvćrket op"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Lukker netvćrket ned"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Der opstod en fejl, men jeg ved ikke hvordan den kan hĺndteres pĺ en\n"
-"pćn mĺde.\n"
-"Fortsćt pĺ eget ansvar!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikér monterings-sti %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
-"Enten er dit cdrom-drev eller din cdrom fejlbehćftet.\n"
-"Tjek cdrom'en pĺ en fćrdiginstalleret maskine ved brug af \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Intet tilgćngeligt diskettedrev"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gĺr til trin `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Dit system har kun fĺ resurser. Du kan fĺ problemer med at installere\n"
-"Mandrake Linux. Hvis dette sker, kan du prřve en tekst-baseret installation "
-"i stedet\n"
-"Dette gřres ved at trykke 'F1' ved opstart fra cdrommen, og sĺ skrive 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installationsmetode"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Vćlg en af de fřlgende installations-mĺder:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Den totale střrrelse af de grupper du har valg er cirka %d Mb.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Hvis du řnsker at installere mindre end denne střrrelse,\n"
-"sĺ vćlg procentdelen af pakker som du vil installere.\n"
-"\n"
-"En lav procentdel vil kun installere de vigtigste pakker;\n"
-"en procentdel pĺ 100%% vil installere alle valgte pakker."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Du har kun plads pĺ din disk til %d%% af disse pakker.\n"
-"\n"
-"Hvis du řnsker at installere mindre end denne střrrelse,\n"
-"sĺ vćlg procentdelen af pakker som du vil installere.\n"
-"En lav procentdel vil kun installere de vigtigste pakker;\n"
-"en procentdel pĺ %d%% vil installere sĺ mange pakker som muligt."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Du har mulighed for at vćlge dem mere prćcist i nćste installationstrin"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procentandel pakker til installation"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Valg af pakkegrupper"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total střrrelse: %d / %d Mb"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Dĺrlig pakke"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Navn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Střrrelse: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Vigtighed: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Du kan ikke vćlge denne pakke, da der ikke er nok plads tilbage til at "
-"installere den"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "De fřlgende pakker vil blive installeret"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "De fřlgende pakker vil blive afinstalleret"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Du kan ikke vćlge/fravćlge denne pakke"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dette er en nřdvendig pakke, den kan ikke vćlges fra"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Du kan ikke fravćlge denne pakke. Den er allerede installeret"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Denne pakke skal opgraderes\n"
-"Er du sikker pĺ at du vil fravćlge den?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Du kan ikke fravćlge denne pakke. Den skal opgraderes"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installér"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Indlćs/gem pĺ diskette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Opdaterer pakkevalg"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimal installation"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Vćlg pakker som skal installeres"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installerer"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Beregnes"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Resterende tid "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Vent venligst, forbereder installationen"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Acceptér"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Nćgt"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Skift din cdrom!\n"
-"\n"
-"Indsćt cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk pĺ Ok, nĺr det "
-"gjort\n"
-"Hvis du ikke har den sĺ tryk pĺ Annullér, sĺ undgĺs installation fra denne cd"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Fortsćt alligevel?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Der opstod en fejl ved sorteringen af pakkerne:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Der opstod en fejl ved installeringen af pakkerne:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Advarsel\n"
-"\n"
-"Lćs venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig i alt "
-"der stĺr, mĺ du ikke installere indholdet af CD-en. Tryk pĺ 'Nćgt' for at "
-"fortsćtte installationen uden disse cdrommer.\n"
-"\n"
-"\n"
-"Visse komponenter pĺ den nćste CD er ikke omfattet af GPL-licensen eller "
-"andre lignende licenser. Hver enkelt komponent er derfor omfattet af de "
-"betingelser der er beskrevet i dets egen licens. Lćs derfor venligst "
-"betingelserne omhyggeligt og fřlg de opstillede betingelser nĺr du bruger og/"
-"eller videredistribuerer komponenterne. Sĺdanne licenser forhindrer normalt "
-"kopiering (sikkerhedskopiering undtaget), videredistribuering, at folk "
-"skiller programmet ad, eller ćndrer i komponenterne. Ethvert brud pĺ "
-"licensen vil řjeblikkeligt fratage dig rettighederne beskrevet i den "
-"specifikke licens. Medmindre licensen giver dig lov hertil, vil det normalt "
-"ikke vćre tilladt at installere programmet pĺ mere end én maskine, eller "
-"bruge det pĺ et netvćrk. Hvis du er i tvivl, sĺ kontakt venligst producenten "
-"af komponenten direkte. Overdragelse til tredjemand eller kopiering af "
-"sĺdanne komponenter inklusive dokumentationen er normalt forbudt.\n"
-"\n"
-"\n"
-"Alle rettigheder til komponenterne pĺ CD-en tilhřrer deres respektive "
-"skabere og er beskyttet af Lov om Ophavsret.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Der er opstĺet en fejl"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Řnsker du virkelig at forlade installationen?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licensaftale"
-
-# Mangler
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Introduktion\n"
-"\n"
-"Operativsystemet og de forskellige komponenter tilgćngelige i Mandrake Linux "
-"distributionen vil herefter blive kaldt \"programmelprodukter\". "
-"Programmelprodukterne inkluderer, men er ikke begrćnset til: vćrktřjssćttet, "
-"metoder, regler og dokumentation.\n"
-"\n"
-"\n"
-"1. Licensaftale\n"
-"\n"
-"Lćs venligst dette dokument. Dette dokument er en licensaftale mellem dig "
-"og MandrakeSoft S.A., som gćlder til disse programmelprodukter. Ved at "
-"installere, kopiere eller bruge disse programmelprodukter accepterer du "
-"indirekte og fuldt ud denne licensaftale med dens betingelser og regler. "
-"Hvis du er uenig i nogensomhelst del af denne licens, mister du retten til "
-"at installere, kopiere eller bruge disse programmelprodukter. Hvilket som "
-"helst forsřg pĺ at installere, kopiere eller bruge disse programmelprodukter "
-"pĺ en mĺde som ikke er i overensstemmelse med betingelserne og reglerne i "
-"denne licens er ulovlig og vil betyde at du mister dine rettighedder under "
-"denne licens. Hvis dette sker, skal du med det samme řdelćgge alle kopier "
-"af disse programmelprodukter.\n"
-"\n"
-"\n"
-"2. Begrćnset garanti\n"
-"\n"
-"Disse programmelprodukter og dokumenter leveres \"som de er\", uden nogen "
-"form for garanti efter som hvad lov foreskriver. MandrakeSoft S.A. vil "
-"under ingen omstćndigheder undtagen hvad lov foreskriver vćre ansvarlig for "
-"specielle, tilfćldige, direkte eller indirekte tab af nogen art "
-"(inkluderende uden begrćnsninger, skader ved tab af forretning, "
-"forstyrrelser af forretning, finansielle tab, advokatbistand, erstatninger "
-"som resultat af en retssag eller nogen anden form for tab) opstĺet under "
-"brugen af disse programmelprodukter eller mangel pĺ samme, selv hvis "
-"MandrakeSoft S.A. er blevet gjort opmćrksom pĺ mulighed for sĺdanne "
-"skader.\n"
-"\n"
-"BEGRĆNSET GARANTI MED HENSYN TIL REGLER OM BRUG AF FORBUDT PROGRAMMEL I "
-"VISSE LANDE\n"
-"\n"
-"Udover hvad lov foreskriver vil MandrakeSoft S.A. eller deres distributřrer "
-"under ingen omstćndigheder vćre ansvarlig for tilfćldige, direkte eller "
-"indirekte tab af nogen art (inkluderende uden begrćnsninger skader ved tab "
-"af forretning, forstyrrelser af forretning, finansielle tab, "
-"advokatbistand, erstatninger som resultat af en retssag eller nogen anden "
-"form for tab) opstĺet under hentning eller brugen af dette programmel fra "
-"Mandrake Linux websider som er forbudt i visse lande ved lov. Denne "
-"begrćnsede garanti gćlder, men er ikke begrćnset til, de stćrke "
-"krypteringskomponenter inkluderet i disse programmelprodukter.\n"
-"\n"
-"\n"
-"3. GPL-licensen og relaterede licenser. \n"
-"\n"
-"Dette programmel bestĺr af komponenter lavet af forskellige personer. De "
-"fleste af disse komponenter bliver reguleret efter vilkĺrene og aftalerne i "
-"GNU General Public License, herefter kaldet \"GPL\", eller lignende "
-"licenser. De fleste af disse licenser tillader dig at bruge, kopiere, "
-"tilpasse eller redistribuere komponenterne, de dćkker. Lćs venligst "
-"vilkĺrene og aftalerne i licensaftalen for hver komponent fřr du bruger det. "
-"Spřrgsmĺl angĺende en komponent bedes adresseret til komponentens forfatter "
-"og ikke til MandrakeSoft. Programmerne udviklet af MandrakeSoft S.A. bliver "
-"reguleret efter GPL-licensen. Dokumentationen skrevet af MandrakeSoft S.A. "
-"bliver reguleret efter en specifik licens. Referér venligst til "
-"dokumentationen for yderligere detaljer.\n"
-"\n"
-"\n"
-"4. Intellektuelle rettigheder \n"
-"\n"
-"Alle rettigheder til komponenterne i programmelproduktet tilhřrer deres "
-"respektive forfattere, og er beskyttet af intellektuelle rettigheds- og "
-"ophavsretslove, gćldende for programmel. MandrakeSoft S.A. forbeholder sine "
-"rettigheder til at ćndre eller tilpasse programmelprodukterne, helt eller "
-"delvist, med alle midler og til alle formĺl. \"Mandrake\", \"Mandrake Linux"
-"\" samt de tilhřrende logoer er varemćrker for MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Gćldende love \n"
-"\n"
-"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
-"en domstolsafgřrelse, vil disse dele blive ekskluderet fra denne kontrakt. "
-"Du vil forblive bundet af de andre gćldende dele af aftalen. Vilkĺrene og "
-"aftalerne i denne licens er reguleret under fransk lov. Alle uenigheder "
-"vedrřrende vilkĺrene i denne licens vil fortrinsvist blive lřst udenfor "
-"domstolene. Som en sidste udvej vil uenighederne blive hĺndteret ved den "
-"rette domstol i Paris, Frankrig. Ved spřrgsmĺl omkring dette dokument, "
-"kontakt venligst MandrakeSoft S.A. \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Vćlg dit tastaturlayout."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Her er den komplette liste over tilgćngelige tastaturer"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Hvilken installations-klasse řnsker du?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installér/Opdatér"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Er dette en nyinstallation eller en opdatering?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Anbefalet"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Opgradering"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Opgradér kun pakker"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Vćlg muse-type."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muse-port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Vćlg hvilken seriel port din mus er forbundet til."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulering af knapper"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulering af knap 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulering af knap 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ingen ledige partitioner"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partitioner for at finde monteringspunkter"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Vćlg monterings-stierne"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Jeg kan ikke lćse din partitionstabel, den er for řdelagt for mig :( Jeg kan "
-"forsřge fortsat at udblanke dĺrlige partitioner, ALLE DATA vil gĺ tabt. Den "
-"anden mulighed er at forbyde DrakX at ćndre partitionstabellen. (fejlen er %"
-"s)\n"
-"\n"
-"Er du indforstĺet med at řdelćgge alle partitionerne?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake kunne ikke lćse partitionstabellen korrekt. Fortsćt pĺ eget ansvar!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plads for 1 MB bootstrap! Installationen vil fortsćtte, men for "
-"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ingen rodpartition fundet til opgradering"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rod-partition"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Hvilken partition indeholder systemets rod-partition (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du skal genstarte for at aktivere ćndringerne i partitionstabellen"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Vćlg partitioner der skal formateres"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Led efter beskadigede blokke?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formaterer partitioner"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Opretter og formaterer fil %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ikke nok swap-plads til at gennemfřre installationen, tilfřj mere"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Leder efter tilgćngelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Leder efter pakker som skal opgraderes"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Dit system har ikke nok plads tilbage til en installation eller opgradering "
-"(%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Alting (%dMb)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Anbefalet (%d Mb)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vćlg indlćs eller gem pakkevalg pĺ diskette.\n"
-"Formatet er det samme som for auto_install-genererede disketter."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Indlćs fra diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Indlćser fra diskette"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Valg af pakker"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Indsćt en diskette med pakkevalget"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Gem pĺ diskette"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Valgt střrrelse er střrre end tilgćngelig plads"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Installationstype"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Du har ikke valgt nogen gruppe af pakker.\n"
-"Vćlg den minimale installation du řnsker"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Med X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Med basal dokumentation (anbefalet!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Virkelig minimal installation (specielt ingen urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Hvis du har alle cd'erne i listen nedenunder, klik Ok.\n"
-"Hvis du ikke har nogen af disse cd'er, klik Annullér.\n"
-"Hvis kun nogen cd'er mangler, fravćlg dem, og klik sĺ Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cdrom med etikette '%s'"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Forbereder installationen"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Konfiguration efter installation"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Indsćt opstartsdisketten i diskette-drevet %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Indsćt Opdater moduler-disketten i drev %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Du har nu mulighed for at nedlćse programmel, der bruger kryptering.\n"
-"\n"
-"ADVARSEL:\n"
-"\n"
-"Grundet forskellige krav til programmel der bruger kryptering, og pĺtvunget "
-"af forskellige lokale lovomrĺder, břr kunder og/eller slutbrugere af dette "
-"programmel sikre sig at lokale love fra dit/jeres lokalomrĺde tillader dig/"
-"jer at nedlćse, gemme og/eller bruge dette programmel.\n"
-"\n"
-"Derudover skal kunder og/eller slutbrugere vćre opmćrksomme pĺ ikke at bryde "
-"lokale love fra dit/jeres lokalomrĺde. Skulle en kunde og/eller slutbruger "
-"ikke respektere det lokale omrĺdes love, vil han/de blive udsat for seriřse "
-"sanktioner.\n"
-"\n"
-"Under ingen omstćndigheder kan Mandrakesoft eller deres producenter og/eller "
-"leverandřrer holdes ansvarlig for speciel, indirekte eller tilfćldig skade "
-"(inkluderet, men ikke begrćnset til tab af overskud, forretningsafbrydelser, "
-"tab af kommercielle data og andre pekunićre tab, eventuelle risici og "
-"erstatninger der skal betales i overensstemmelse med retlig beslutning) som "
-"fřlge af brug, besiddelse eller nedlćsning af dette programmel, som kunder "
-"og/eller slutbrugere kunne fĺ adgang til efter at have accepteret denne "
-"aftale.\n"
-"\n"
-"\n"
-"For spřrgsmĺl om denne aftale, vćr venlig at kontakte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Du har nu mulighed for at hente opdaterede pakker som er blevet udgivet\n"
-"efter distributionen blev gjort tilgćngelig.\n"
-"\n"
-"Du vil fĺ sikkerhedsrettelser eller fejlrettelser, men du skal have en\n"
-"internet-opkobling for at fortsćtte.\n"
-"\n"
-"Řnsker du at installere opdateringerne?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontakter Mandrake Linux netsted for at hente listen over tilgćngelige spejle"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Vćlg det spejl hvorfra pakkerne skal hentes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontakter spejlet for at hente listen af tilgćngelige pakker"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Hvad er din tidszone?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Maskin-ur sat til GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hjćlp af NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Ekstern CUPS server"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Ingen printer"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Har du et ISA-lydkort?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Křr \"sndconfig\" efter installation for at konfigurere dit lydkort"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Intet lydkort genkendt. Prřv at křre \"harddrake\" efter installation"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Oversigt"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Mus"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Tidszone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Lydkort"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kort"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokale filer"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Sćt root-adgangskode"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ingen adgangskode"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Dette kodeord er for nemt at gćtte (det skal mindst vćre pĺ %d tegn)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Identifikation"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Autentificering LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP grundlćggende dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Autentificering NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-domćne"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"En tilpasset opstartsdiskette lader dig starte Linux systemet op uden at "
-"vćre afhćngig af den normale opstarter. Det kan vćre nyttigt, hvis du ikke "
-"vil installere SILO pĺ dit system - eller hvis et andet operativsystem "
-"fjerner SILO, eller hvis SILO ikke virker med dit maskinel. En tilpasset "
-"opstartsdiskette kan ogsĺ bruges sammen med Mandrakes `rescue image', "
-"hvilket gřr det meget nemmere at reparere systemet i tilfćlde af "
-"systemnedbrud.\n"
-"\n"
-"Hvis du řnsker at lave en opstartsdiskette til dit system, indsćt en "
-"diskette i dit fřrste diskettedrev og tryk 'Ok'."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Fřrste diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Andet diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Spring over"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"En tilpasset opstartsdiskette lader dig opstarte Linux systemet uden at vćre "
-"afhćngig af den normale opstarter. Det kan vćre nyttigt, hvis du ikke vil "
-"installere LILO (eller grub) pĺ dit system - eller hvis et andet "
-"operativsystem fjerner LILO, eller hvis LILO ikke virker med din hardware. "
-"En tilpasset opstartsdiskette kan ogsĺ bruges sammen med Mandrakes `rescue "
-"image', hvilket gřr det meget nemmere at reparere systemet i tilfćlde af "
-"systemnedbrud. \n"
-"Vil du lave en opstartsdiskette til dit system?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ADVARSEL! Du bruger XFS til din root-partition,\n"
-"oprettelse af en opstartsdiskette pĺ en 1.44 Mb diskette vil formentlig\n"
-"mislykkes, fordi XFS krćver en meget stor driver)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Der er desvćrre ikke noget tilgćngeligt diskette-drev"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Vćlg det diskette-drev, du vil benytte til at lave boot-disketten"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Indsćt en diskette i %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Oprette opstartsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Forbereder opstarter"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Det virker som om du har en OldWorld eller ukendt maskine, yaboot "
-"opstartsindlćseren vil ikke virke for dig. Installationen vil fortsćtte, men "
-"du skal bruge BootX for at starte din maskine."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Řnsker du at bruge aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fejl ved installation af aboot, \n"
-"forsřg at gennemtvinge installation selv om dette kan řdelćgge den fřrste "
-"partition?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Installerer systemopstarter"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installation af opstarter mislykkedes. Den fřlgende fejl opstod:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du behřver mĺske at ćndre din Ĺben Firmware opstartsenhed for at slĺ "
-"systemstarteren til. Hvis du ikke ser systemstarter-beskeden ved genstart, "
-"sĺ hold Command-Option-O-F nede og indtast:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv sĺ: shut-down\n"
-"Ved nćste opstart burde du se systemstarteren."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Indsćt en tom diskette i drev %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nogen dele af installationen er ikke fćrdig\n"
-"\n"
-"Er du sikker pĺ du řnsker du at lukke nu?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Tillykke, installationen er fćrdig.\n"
-"Fjern boot-mediet og tryk retur for at genstarte.\n"
-"\n"
-"\n"
-"For information om rettelser til denne udgivelse af Mandrake Linux, se "
-"Errata pĺ:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information om konfigurering af dit system kan du finde i kapitlet om efter-"
-"installation i den Officielle Mandrake Linux Brugervejledning."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Autoinstallation kan ske fuldautomatisk hvis řnsket. I sĺ tilfćlde vil den "
-"overtage hele harddisken!! (dette er beregnet til at installere pĺ en anden "
-"maskine).\n"
-"\n"
-"Du foretrćkker mĺske at afspille installationen igen\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatisk"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Afspil igen"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Gem pakke-valg"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> mellem elementer | <Space> vćlger | <F12> nćste skćrm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mangler"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "konsolhjćlper mangler"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Vćlg en fil"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanceret"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Basal"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Vent venligst"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Udvid trć"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sammenfold trć"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellem flad og gruppesorteret"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Dĺrligt valg, prřv igen\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Dit valg? (standard %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Indgange som du skal udfylde:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Dit valg? (0/1, standard '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Knap '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Řnsker du at klikke pĺ denne knap?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Dit valg? (standard '%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Der er mange ting at vćlge imellem (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vćlg det fřrste tal i 10-omrĺdet som du řnsker at redigere,\n"
-"Eller tryk retur for at fortsćtte.\n"
-"Dit valg? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Bemćrk, en etikette ćndredes:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Indsend igen"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tjekkisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Tysk"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spansk"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finsk"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Fransk"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norsk"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polsk"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russisk"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Svensk"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Britisk"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Amerikansk"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albansk"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armensk (gammel)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armensk (skrivemaskine)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armensk (fonetisk)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidiansk (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgisk"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarsk (fonetisk)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarsk (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliansk (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Hviderussisk"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Schweizisk (Tysk layout)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Schweizisk (Fransk layout)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tjekkisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Tysk (ingen dřde taster)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dansk"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (norsk)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (svensk)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estisk"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgisk (russisk layout)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgisk (Latin layout)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grćsk"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungarsk"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatisk"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelsk"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelsk (Fonetisk)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iransk"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandsk"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiensk"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japansk 106 taster"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreansk tastatur"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinamerikansk"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauisk AZERTY (gammel)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauisk AZERTY (ny)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"talrćkke\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"fonetisk\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lettisk"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonisk"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollandsk"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polsk (polsk layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polsk (polsk layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugisisk"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadisk (Québec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Russisk (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Russisk (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russisk (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovensk"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbisk (kyrillisk)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailandsk"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik tastatur"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (traditionel \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrainsk"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Amerikansk (internaltionalt)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"talrćkke\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavisk (latinsk)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Hřjre alt-tast"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Begge taster samtidigt"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol- og skiftetaster samtidigt"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock-tast"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- og alt-taster samtidigt"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt og Shift-taster samtidigt"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "'Menu'-tast"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Venstre Windows-tast"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Hřjre Windows-tast"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirkulćre monteringer %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske delarkiver fřrst\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA-understřttelse eksisterer ikke lćngere for 2.2-kerner. Brug en 2.4-"
-"kerne."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun-mus"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standard PS2 mus med hjul"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking-mus"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 knap"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Standard 2-knaps mus"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Standard"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Hjul"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriel"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Standard 3-knaps mus"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serien (seriel)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serien"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mus (seriel, gammel C7 type)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Busmus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 knapper"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 knapper"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ingenting"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Test musen"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "For at aktivere musen,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "FLYT PĹ HJULET!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Afslut"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Nćste ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Forrige"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Er dette korrekt?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Lav forbindelse til Internettet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Den mest almindelige mĺde at forbinde med ADSL er pppoe.\n"
-"Nogen forbindelser bruger pptp, og nogle fĺ bruger DHCP.\n"
-"Hvis du ikke ved noget, vćlg 'brug pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "brug dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "brug pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "brug pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Hvilken DHCP klient řnsker du at bruge?\n"
-"Standard er dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Der blev ikke fundet nogen ethernet netvćrksadapter pĺ dit system.\n"
-"Kan ikke sćtte denne forbindelsetype op."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Vćlg netvćrksgrćnsesnit"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Vćlg hvilken netvćrksadapter du řnsker at bruge til at lave forbindelse til "
-"Internettet med."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "kunne ikke finde noget netkort"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfigurerer netvćrk"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Indtast dit vćrtsnavn hvis du kender det.\n"
-"Nogle DHCP-servere krćver vćrtsnavnet for at fungere.\n"
-"Dit vćrtsnavn břr vćre et fuldt kvalificeret vćrtsnavn,\n"
-"fx 'minpc.mitfirma.dk'."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Vćrtsnavn"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Konfigurér netvćrk"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Hvad slags type er din ISDN-forbindelse?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Hvilken ISDN-konfigurering foretrćkker du?\n"
-"\n"
-"* Den gamle konfiguration bruger isdn4net. Det har stćrke\n"
-" vćrktřjer, men det er vanskeligt at konfigurere for en nybegynder,\n"
-" og er ikke standardbaseret.\n"
-"\n"
-"' Det nye konfigurationsvćrktřj er enklere at forstĺ,\n"
-" mere standardiseret, men med fćrre vćrktřjer.\n"
-"\n"
-"Vi anbefaler den nye konfiguration.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Ny konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Gammel konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfiguration"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vćlg din udbyder.\n"
-" Hvis de ikke er i listen, vćlg Ikke listet"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europaprotokollen"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protokol for Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol for resten af verden"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol for resten af verden \n"
-" ingen D-kanal (lejet linje)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Hvilken protokol řnsker du at bruge?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Hvad slags kort har du?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Det ved jeg ikke"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Hvis du har et ISA kort burde vćrdiene i nćste billede vćre rigtige.\n"
-"\n"
-"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Afbryd"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Fortsćt"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Hvilket er dit ISDN-kort?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. Vćlg et PCI-"
-"kort i nćste skćrmbillede."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ingen ISDN PCI-kort fundet. Vćlg ét i nćste skćrmbillede."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Angiv hvilken seriel port dit modem er forbundet til."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opkaldsindstillinger"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Navn pĺ forbindelsen"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Brugernavn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skript-baseret"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-baseret"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domćnenavn"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Fřrste DNS-server (valgfri)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Anden DNS-server (valgfri)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lukke forbindelsen til Internettet eller genkonfigurere din "
-"forbindelse."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan genkonfigurere din forbindelse"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Du har forbindelse til Internettet nu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Du kan lave forbindelse til Internettet eller omkonfigurere din forbindelse."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Du er ikke forbundet til Internettet nu."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Tilslut"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Afbryd"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfigurér forbindelsen"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetforbindelse & -konfiguration"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Vi skal nu konfigurere opkoblingen '%s'."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Vi skal nu konfigurere opkoblingen '%s'.\n"
-"\n"
-"\n"
-"Tryk OK for at begynde."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Konfigurér netvćrk"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da du er i gang med en netvćrksinstallation er dit netvćrk allerede "
-"konfigureret.\n"
-"Klik OK for at beholde din konfiguration, eller annullér for at "
-"omkonfigurere din Internet- og netvćrksforbindelse.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Velkommen til Netvćrkskonfigurations-vejlederen\n"
-"\n"
-"Vi skal til at konfigurere din internet- eller netvćrksforbindelse.\n"
-"Hvis du ikke řnsker at bruge autodetektering, sĺ fravćlg afkrydsningsboksen\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Vćlg profilen der skal konfigureres"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Brug automatisk detektion"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detekterer enheder..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normal modemforbindelse"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "Detekteret pĺ port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-forbindelse"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "Detekteret %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL opkobling"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "Detekteret pĺ grćnseflade %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabelforbindelse"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kabelopkobling detekteret"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Lokalnet-konfiguration"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet-kort detekteret"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Vćlg den opkobling, du řnsker at konfigurere"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigureret flere mĺder at koble dig mod internet pĺ.\n"
-"Venligst vćlg den du řnsker at bruger.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet opkobling"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Řnsker du at starte din forbindelse ved opstart?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netvćrks konfiguration"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Netvćrket skal startes op igen"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Et problem opstod ved genstart af netvćrket: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Tillykke, netvćrks- og internetkonfigurationen er fćrdig.\n"
-"Konfigurationen vil nu blive anvendt pĺ dit system.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Derefter anbefaler vi at du genstarter dit X-miljř for\n"
-"at undgĺ problemer med det ćndrede vćrtsnavn"
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Problemer indtraf under konfigurationen.\n"
-"Afprřv din forbindelse med net_monitor eller mcc. Hvis din forbindelse ikke "
-"virker, kan du prřve at genstarte konfigurationen."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
-"forbindelse til Internettet.\n"
-"Ved kun at trykke pĺ OK beholder du den nuvćrende konfiguration.\n"
-"Ćndringer i felterne nedenunder vil overskrive denne konfiguration."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
-"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurerer netvćrksenheden %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (drivprogram %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-adresse"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmaske"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatisk IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresse skal have formatet 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Indtast domćnenavn, vćrtsnavn og IP adressen for evt. ekstra navne-servere.\n"
-"Dit vćrtsnavn skal vćre et fuldt kvalificeret vćrtsnavn inklusive domćne,\n"
-"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
-"sĺ lad navne-server-felterne vćre blanke."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS-server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (fx %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway enhed"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfiguration af mellemvćrt (proxy)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Fřlg id for netvćrkskort (nyttigt for bćrbare)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy skal vćre http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy skal vćre ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet-konfiguration"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Řnsker du at forsřge at skabe forbindelse til Internettet nu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Tester din forbindelse..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Systemet er ikke forbundet til Internettet nu."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Det lader ikke til at dit system har forbindelse til Internettet.\n"
-"Prřv at omkonfigurere din forbindelse."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Forbindelses-konfiguration"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Udfyld eller markér feltet nedenunder"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kort IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kort IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kort IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kort IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Dit personlige telefonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Navn pĺ udbyder (f.eks. udbyder.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Udbyders telefonnummer"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Udbyder DNS 1 (valgfri)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Udbyder DNS 2 (valgfri)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Vćlg dit land"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Opringningsmĺde"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Opkoblingshastighed"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Opkoblingens tidsudlřb (i sekunder)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konto-login (brugernavn)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Kodeord for konto"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montering mislykkedes: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Udvidet partition ikke understřttet pĺ denne platform"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
-"Den eneste lřsning er at flytte dine primćre partitioner, sĺledes at\n"
-"\"hullet\" bliver placeret ved siden af de udvidede partitioner."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Genskabning fra fil %s mislykkedes: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fejl i sikkerhedskopien"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fejl ved skrivning til fil %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Noget slemt sker pĺ dit drev. \n"
-"En test for at tjekke integriteten af data er mislykkedes. \n"
-"Dette betyder at alt pĺ disken vil ende som tilfćldigt snavs"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "skal have"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "vigtigt"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "meget rart"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "rart"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "mĺske"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Dćmon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokal printer"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Ekstern printer"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Printer pĺ ekstern CUPS server"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Printer pĺ ekstern lpd server"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Netvćrksprinter (TCP/sokkel)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer pĺ SMB/Windows 95/98/NT server"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Printer pĺ en NetWare server"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Indtast en printerenheds-URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "kanalisér opgave ind i kommando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Ukendt model"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale printere"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Eksterne printere"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " pĺ parallelport \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB printer \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", multi-funktions-enhed pĺ parallel port \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", multi-funktions-enhed pĺ USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-funktions-enhed pĺ HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", multi-funktions-enhed"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", skriver til %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "pĺ LPD-server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP vćrt \"%s\", port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "pĺ Windows-server \"%s\", deling \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "pĺ Novell-server \"%s\", printer \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", med kommando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Rĺ printer (ingen driver)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(pĺ %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(pĺ denne maskine)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Pĺ CUPS-server '%s'"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Forvalgt)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Vćlg printer-forbindelse"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Hvordan er printeren tilsluttet?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Eksterne CUPS-servere behřver du ikke at konfigurere her: \n"
-"disse printere vil automatisk blive fundet."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS-Konfiguration"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Angiv CUPS server"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Du behřver ikke at konfigurere nogen printere hér for at fĺ adgang til "
-"eksterne CUPS-servere; CUPS-serverne informerer automatisk din maskine "
-"information om deres printere. Alle printere som for řjeblikket er kendt af "
-"din maskine vil vćre opfřrt under \"Eksterne printere\". Nĺr CUPS-serveren "
-"ikke er pĺ dit lokalnetvćrk skal du opgive CUPS-serverens IP-adresse og "
-"eventuelle portnummer for at fĺ printerinformation fra serveren, ellers kan "
-"du lade disse felter vćre blanke."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalt bliver CUPS konfigureret automatisk i overensstemmelse med dit "
-"netvćrksmiljř, sĺ du kan fĺ fat i printerne pĺ CUPS-serverne pĺ dit "
-"lokalnetvćrk. Hvis dette ikke virker ordentligt, sĺ deaktivér 'Automatisk "
-"CUPS-konfiguration' og redigér din fil /etc/cups/cupsd.conf selv. Glem ikke "
-"at genstarte CUPS bagefter. (kommando: 'service cups restart')."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adressen břr se ud som 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Port-nummeret břr vćre et heltal!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-serverens IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatisk CUPS-konfiguration"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Sřger efter enheder..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Afprřv porte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Tilfřj en ny printer"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Velkommen til vejlederen for printeropsćtning\n"
-"\n"
-"Denne vejleder lader dig installere lokale eller eksterne printere som skal "
-"bruges fra denne maskine, og ogsĺ fra andre maskiner i netvćrket.\n"
-"\n"
-"Den spřrger dig om alle nřdvendige oplysninger til at opsćtte printere og "
-"giver dig adgang til alle tilgćngelige printerdrivere, drivermuligheder og "
-"opkoblingstyper for printere."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokal printer"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Velkommen til vejlederen for printeropsćtning\n"
-"\n"
-"Denne vejleder vil hjćlpe dig med at installere dine printere tilsluttet "
-"denne maskine.\n"
-"\n"
-"Tilslut dine printere til maskinen og tćnd dem. Klik pĺ \"Nćste\" nĺr du er "
-"klar, eller pĺ \"Annullér\" hvis du ikke vil opsćtte dine printere nu.\n"
-"\n"
-"Bemćrk at nogen maskiner kan gĺ ned under den automatiske sřgning efter "
-"printere; slĺ 'Auto-opdagelse af printere' fra for at lave en printer "
-"installation uden auto-sřgning. Brug printerdrakes 'Ekspert-udgave' hvis du "
-"řnsker at opsćtte udskrift pĺ en ekstern printer og Printerdrake ikke lister "
-"denne automatisk."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Auto-opdagelse af printere"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Tillykke, din printer er nu installeret og konfigureret!\n"
-"\n"
-"Du kan udskrive med 'Udskriv'-kommandoen i dit program (normalt i 'Filer'-"
-"menuen).\n"
-"\n"
-"Hvis du řnsker at tilfřje, fjerne eller omdřbe en printer, eller hvis du "
-"řnsker at ćndre pĺ standard-indstillingerne (papirbakke, printkvalitet ...), "
-"sĺ vćlg 'Printer' i 'Udstyr'-afsnittet i Mandrake Kontrolcentret."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Auto-opdagelse af printere"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake er i stand til at automatisk opdage dine lokalt forbundne "
-"parallelle og USB-printere for dig, men bemćrk at pĺ nogen systemer KAN DEN "
-"AUTOMATISKE OPDAGELSE FRYSE DIT SYSTEM OG ENDOG ŘDELĆGGE DINE FILSYSTEMER! "
-"Sĺ gřr det pĺ EGET ANSVAR!\n"
-"\n"
-"Řnsker du virkeligt at fĺ dine printere automatisk opdaget?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Udfřr automatisk detektion"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Opsćt printer manuelt"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Fandt %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Printer pĺ parallel port \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-printer \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ingen lokal printer fundet! For at installere en printer i hĺnden skal du "
-"indtaste et enhedsnavn/filnavn i inddatalinjen (parallelporte: /dev/lp0, /"
-"dev/lp1 ..., svarende til LPT1:, LPT2: ..., fřrste USB-printer: /dev/usb/"
-"lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Du skal indtaste en enhed eller et filnavn!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Ingen lokal printer fundet!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Netvćrksprintere kan kun installeres efter installeringen. Vćlg 'Udstyr' og "
-"dernćst 'Printer' i Mandrake kontrolcentret."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"For at installere netvćrksprintere skal du klikke pĺ 'Annullér', skifte til "
-"'Ekspert-version' og klikke pĺ 'Tilfřj en ny printer' igen."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Den fřlgende printer blev opdaget automatisk. Hvis det ikke er den du řnsker "
-"at opsćtte sĺ indtast et enhedsnavn/filnavn pĺ inddatalinjen"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Her er en liste over alle automatisk opdagede printere. Vćlg den printer du "
-"řnsker at opsćtte eller indtast et enhedsnavn/filnavn pĺ inddatalinjen"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Den fřlgende printer blev opdaget automatisk. Konfigurationen af printeren "
-"vil ske fuldstćndigt automatisk. Hvis din printer ikke blev fundet korrekt "
-"eller hvis du foretrćkker en tilpasset printerkonfiguration, sĺ slĺ 'Manuel "
-"konfiguration' til."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Her er en liste over alle automatisk opdagede printere. Vćlg den printer du "
-"řnsker at opsćtte. Konfigurationen af printeren vil ske fuldstćndigt "
-"automatisk. Hvis din printer ikke blev fundet korrekt eller hvis du "
-"foretrćkker en tilpasset printerkonfiguration, sĺ slĺ 'Manuel konfiguration' "
-"til."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Angiv hvilken port din printer er forbundet til eller indtast et enhedsnavn/"
-"filnavn pĺ inddatalinjen"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Angiv hvilken port din printer er forbundet til."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(parallelporte: /dev/lp0, /dev/lp1 ..., svarende til LPT1:, LPT2: ..., "
-"fřrste USB-printer: /dev/usb/lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Du skal vćlge eller indtaste en printer/enhed!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuel konfiguration"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Er din printer en multi-funktionsenhed fra HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 med skanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installerer HPOJ-pakke..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Tjekker enhed og konfigurerer HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installerer SANE-pakke..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skanner pĺ din HP multi-funktionsenhed"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Gřr printerport tilgćngelig for CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Lćser database over printere ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Parametre til ekstern lpd"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"For at bruge en ekstern printer, skal du opgive vćrtsnavnet\n"
-"for printerserveren og navnet pĺ printeren pĺ denne server."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Eksternt vćrtsnavn"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Eksternt printernavn"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Eksternt vćrtsnavn mangler"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Det eksterne vćrtsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)-printer indstillinger"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"For at skrive til en SMB printer skal du angive vćrtsnavnet pĺ SMB maskinen "
-"(bemćrk at dette navn kan vćre forskelligt fra TCP/IP-navnet!) og muligvis "
-"IP-adressen pĺ printerserveren, sĺ vel som delenavnet for printeren du vil "
-"bruge samt nřdvendig information om brugernavn, adgangskode og arbejdsgruppe."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-servervćrt"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-serverens IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Dele-navn"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Arbejdsgruppe"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Enten servernavnet eller serverens IP skal angives!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba-delenavn mangler!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "SIKKERHEDSADVARSEL!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Du er ved at opsćtte udskrivning til en Windows-konto med adgangskode. "
-"Grundet en fejl i arkitekturen af Sambas klientprogrammel bliver "
-"adgangskoden lagt i klar tekst i Samba-klientens kommandolinje, som bruges "
-"til at sende printjobbet til Windows-serveren. Sĺ det er muligt for enhver "
-"bruger pĺ denne maskine at vise adgangskoden pĺ skćrmen ved at angive "
-"kommandoer som 'ps auxwww'.\n"
-"\n"
-"Vi anbefaler at bruge en af de fřlgende alternativer (i alle tilfćlde skal "
-"du forsikre dig om at kun maskiner fra dit lokalnetvćrk har adgang til din "
-"Windows-server, for eksempel ved hjćlp af en brandmur):\n"
-"\n"
-"Brug en konto uden adgangskode pĺ din Windows-server, sĺsom 'GUEST'-kontoen "
-"eller en speciel konto som kun anvendes til udskrift. Fjern ikke "
-"adgangskodebeskyttelsen fra en personlig konto eller en administrator-"
-"konto.\n"
-"\n"
-"Opsćt din Windows-server sĺ printeren er tilgćngelig under LPD-protokollen. "
-"Opsćt dernćst udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Opsćt din Windows-server til at gřre printeren tilgćngelig under IPP-"
-"protokollen, og opsćt udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Forbind din printer til en Linux-server og lad dine Windows-maskiner "
-"tilslutte sig til den som klienter.\n"
-"\n"
-"Řnsker du virkelig at fortsćtte med at opsćtte din printer som du gřr nu?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare printer-parametre"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"For at skrive til en NetWare printer skal du angive navnet pĺ NetWare "
-"printerserveren (bemćrk at dette navn kan vćre forskelligt fra TCP/IP-"
-"navnet!) sĺvel som křnavnet for den printer du vil benytte samt om "
-"nřdvendigt et brugernavn og en adgangskode."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printer-server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Printerkř-navn"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-servernavn mangler!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-křnavn mangler!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Sokkel-printer-parametre"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"For at skrive til en TCP eller sokkel-printer skal du angive vćrtsnavnet pĺ "
-"printeren, og eventuelt portnummer. Pĺ HP JetDirect-servere er portnummeret "
-"normalt 9100, pĺ andre servere varierer det. Tjek manualen for dit udstyr."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "printer-vćrtsnavn"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "printer-vćrtsnavn mangler!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printer-enheds URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte opgive URI til printeren. URIen skal vćre i henhold til enten "
-"CUPS- eller Foomatic-standarden. Bemćrk at ikke alle typer URIer "
-"understřttes af alle kř-behandlere."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI skal opgives!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Alle printere behřver et navn (f.eks. 'printer').\n"
-"Beskrivelsen og lokaliseringsfelterne behřver ikke \n"
-"udfyldes. De er kommentarer til brugerne."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Navn pĺ printer"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beskrivelse"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Placering"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Forbereder printerdatabase: ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Din printermodel"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake har sammenlignet modelnavnet fra den automatiske genkendelse af "
-"printeren med modellerne listet i dens printerdatabase for at finde den "
-"bedste match. Dette valg kan vćre forkert, isćr nĺr din printer slet ikke er "
-"listet i databasen. Sĺ tjek om valget er korrekt og klik \"Modellen er "
-"korrekt\" hvis den er, og hvis ikke sĺ klik \"Vćlg model manuelt\" sĺ du kan "
-"udvćlge din printermodel manuelt pĺ den nćste skćrm.\n"
-"\n"
-"Som din printer har Printerdrake fundet:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Modellen er korrekt"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Vćlg model manuelt"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Valg af printermodel"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Hvilken printermodel har du?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Tjek venligst om Printerdrake udfřrte \n"
-"autodetekteringen af din printermodel\n"
-"korrekt. Opsřg den korrekte model i listen\n"
-"nĺr markřren stĺr pĺ en forkert model, eller\n"
-"pĺ 'Rĺ printer'."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Hvis din printer ikke er listet, sĺ vćlg en kompatibel (se printermanual) "
-"eller en lignende printer."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI konfiguration af winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Du konfigurerer en OKI laser-winprinter. Disse printere bruger en meget "
-"speciel kommunikationsprotokol og derfor virker de kun nĺr de er forbundet "
-"til den fřrste parallelle port. Nĺr din printer er forbundet til en anden "
-"port eller til en printserverboks, sĺ forbind printeren til den fřrste "
-"parallelle port fřr du udskriver en prřveside. Ellers vil printeren ikke "
-"virke. Din opsćtning af forbindelsestype vil blive ignoreret af driveren."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguration"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Printerdriverne til inkjet som leveres af Lexmark understřtter kun lokale "
-"printere, ikke printere pĺ eksterne maskiner eller printserverbokse. Forbind "
-"din printer til en lokal port eller konfigurér den pĺ den maskine, den er "
-"forbundet til."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"For at kunne udskrive pĺ din Lexmark inkjet fra denne konfigurering skal du "
-"bruge inkjet printerdriverne leveret af Lexmark (http://www.lexmark.com/). "
-"Gĺ til webstedet i USA og klik pĺ 'Drivers'-knappen. Vćlg sĺ din model og "
-"derefter 'Linux' som operativsystem. Driverne kommer som RPM-pakker eller "
-"skal-skripter med interaktiv grafisk installation. Du behřver ikke lave "
-"denne konfiguration via de grafiske grćnseflader. Annullér direkte efter "
-"licensaftalen. Udskriv derefter justeringsider for skrivehovedet med "
-"'lexmarkmaintain', og justér opsćtningen af justeringen af hovedet med dette "
-"program."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standardprinterens indstillinger\n"
-"\n"
-"Du břr tjekke at sidestřrrelsen og blćktypen/udskriftstilstanden (hvis til "
-"stede) og ogsĺ konfigurationen af laserprinterudstyr (hukommelse, duplex-"
-"enhed, ekstra bakker) er sat rigtigt. Bemćrk at en meget god "
-"udskriftskvalitet kan gřre udskriften betydeligt langsommere."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s skal vćre et helt tal!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s skal vćre et tal!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er udenfor omrĺde!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Řnsker du fremover at bruge printeren \"%s\"\n"
-"som standard?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testsider"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Vćlg testsiderne du řnsker at udskrive.\n"
-"Bemćrk: fototestsiden kan tage ret lang tid at skrive ud, og pĺ "
-"laserprintere med for lidt hukommelse vil den mĺske ikke skrives ud i det "
-"hele taget. Som regel vil det vćre nok at udskrive standard-testsiden."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Ingen testsider"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Udskriv"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standard testside"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Fototestside"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Udskriv ikke nogen testsider"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Udskriver testsider..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsider er blevet sendt til printeren.\n"
-"Dette kan tage lidt tid fřr printeren starter.\n"
-"Udskrivningsstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsider er sendt til printeren.\n"
-"Det kan tage lidt tid fřr printeren starter.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Fungerer det korrekt?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Rĺ printer"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"For at skrive en fil fra kommandolinjen (terminalvinduet) kan du enten bruge "
-"programmet '%s <fil>' eller et grafisk printervćrktřj: 'xpp <fil>' eller "
-"'kprinter <fil>'. De grafiske vćrktřjer lader dig vćlge printeren og ćndre "
-"indstillingerne pĺ en nem mĺde.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Disse kommandoer kan du ogsĺ bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad vćre med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"'%s'-kommandoen tillader ogsĺ ćndring af indstillingsmulighederne for et "
-"bestemt udskriftsjob. Tilfřj blot de řnskede indstillinger til "
-"kommandolinjen, fx '%s <fil>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Hvilke muligheder der er for den aktuelle printer kan du enten lćse pĺ "
-"listen vist nedenfor, eller klikke pĺ knappen 'liste med printermuligheder'%"
-"s.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Her er en liste over tilgćngelige printmuligheder for den aktuelle printer:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Denne kommando kan du ogsĺ bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad vćre med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"For at fĺ en liste af tilgćngelige muligheder for den aktuelle printer kan "
-"du klikke pĺ knappen 'Liste med printermuligheder'."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>' eller '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Du kan ogsĺ bruge den grafiske grćnseflade 'xpdq' til at sćtte "
-"valgmuligheder og behandle udskriftsopgaver.\n"
-"Hvis du bruger KDE som skrivebordsmiljř, har du en 'panik-knap', en ikon pĺ "
-"skrivebordet, benćvnt med 'STOP printer!', som stopper alle udskriftsopgaver "
-"řjeblikkeligt nĺr du klikker pĺ den. Dette er fx nyttigt hvis papiret "
-"krřller sammen.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"'%s'- og '%s'-kommandoerne tillader ogsĺ ćndring af indstillingsmulighederne "
-"for et bestemt udskriftsjob. Tilfřj blot de řnskede indstillinger til "
-"kommandolinjen, fx '%s <fil>'.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Luk"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Udskriver eller skanner pĺ '%s'"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Udskriver pĺ printeren '%s'"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Liste med printermuligheder"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Din HP-multifunktionsenhed blev konfigureret automatisk til at kunne skanne. "
-"Nu kan du skanne med 'scanimage' ('scanimage -d hp:%s' for at angive "
-"skanneren hvis du har mere end én) fra kommandolinjen eller med den grafiske "
-"grćnseflade 'xscanimage' eller 'xsane'. Hvis du bruger GIMP kan du ogsĺ "
-"skanne ved at vćlge det passende punkt i menuen 'Filer/Hent'. Brug ogsĺ 'man "
-"scanimage' og 'man sane-hp' pĺ kommandolinjen for at fĺ mere information\n"
-"\n"
-"Brug ikke \"scannerdrake\" pĺ denne enhed!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Din HP-multifunktionsenhed blev konfigureret automatisk til at kunne skanne. "
-"Nu kan du skanne med 'ptal-hp %s scan ...' fra kommandolinjen. Skanning via "
-"en grafisk grćnseflade eller fra GIMP er endnu ikke understřttet for din "
-"enhed. Du kan finde mere information i filen \"/usr/share/doc/hpoj-0.8/ptal-"
-"hp-scan.html\" pĺ dit system. Hvis du har en HP LaserJet 1100 eller 1200 kan "
-"du kun skanne nĺr du har skannermuligheden installeret pĺ udstyret.\n"
-"\n"
-"Brug ikke \"scannerdrake\" pĺ denne enhed!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Lćser printerdata ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Overfřr printerkonfiguration"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Du kan kopiere printerkonfigurationen du har sat op for křserveren %s til %"
-"s, din nuvćrende křserver. Al konfigurationsdata (printernavn, beskrivelse, "
-"opkoblingstype og standardindstillinger) bliver overtaget, men ikke "
-"opgaver.\n"
-"Ikke alle křer kan overfřres pĺ grund af:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS understřtter ikke printere pĺ Novellservere eller printere som sender "
-"dataene ind i en frit-formet kommando.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ understřtter kun lokale printere, eksterne LPD printere, og Sokkel/TCP "
-"printere.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng understřtter ikke IPP printere.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Desuden kan křer lavet med dette program eller \"foomatic -configure\" ikke "
-"overflyttes."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Printere konfigureret med PPD-filerne, som producenten har lavet, eller med "
-"CUPS egne drivere kan heller ikke overflyttes."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Vćlg printerene som du vil overflytte og klik\n"
-"\"Overfřr\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Overfřr ikke printere"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Overfřr"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En printer med navnet \"%s\" eksisterer allerede pĺ %s. \n"
-"Klik \"Overfřr\" for at overskrive.\n"
-"Du kan ogsĺ give et nyt printernavn, eller overspringe denne printer."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Navn pĺ printer břr kun indeholde bogstaver, tal og understregen _"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Printeren \"%s\" eksisterer allerede,\n"
-"řnsker du virkelig at overskrive dens konfiguration?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nyt printernavn"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Overfřrer %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Du har overfřrt din tidligere standard-printer '%s', skal den ogsĺ vćre "
-"standard-printer under det nye printersystem %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Opfrisker printerdata ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration af en ekstern printer"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Starter netvćrk ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Konfigurér netvćrket nu"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Netvćrksfunktionalitet ikke konfigureret"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Du er ved at konfigurere en ekstern printer. Dette krćver en virkende "
-"netvćrksadgang, men dit netvćrk er endnu ikke konfigureret. Hvis du vil "
-"fortsćtte uden en netvćrkskonfiguration, vil du ikke kunne bruge printeren "
-"som du konfigurerer nu. Hvordan řnsker du at fortsćtte?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Fortsćt med konfigurering af netvćrk"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Netvćrksopsćtningen lavet under installationen kan ikke startes nu. Tjek om "
-"netvćrket bliver tilgćngeligt efter opstart af dit system, og ret "
-"konfigurationen med Mandrake Kontrolcenter, afsnittet 'Netvćrk og internet'/ "
-"'Forbindelse', og konfigurér derefter printeren ogsĺ med Mandrake "
-"Kontrolcenter, afsnittet om 'Maskinel'/'Printer'"
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Netvćrksadgangen křrte ikke og kunne ikke startes. Tjek din konfiguration og "
-"dit udstyr. Prřv derefter at konfigurere din eksterne printer igen."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Genstarter printsystemet ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "hřj"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerer et printersystem pĺ sikkerhedsniveauet %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Du er ved at installere printsystemet %s pĺ et system křrende pĺ "
-"sikkerhedsniveau %s.\n"
-"\n"
-"Dette printsystem křrer som en dćmon (baggrundsproces) som venter pĺ "
-"printeropgaver og behandler dem. Denne dćmon er ogsĺ tilgćngelig for "
-"eksterne maskiner via netvćrket, og derfor er det et muligt angrebspunkt. "
-"Derfor bliver kun nogle fĺ udvalgte dćmoner startet op som standard i dette "
-"sikkerhedsniveau.\n"
-"\n"
-"Řnsker du virkelig at konfigurere udskrivning pĺ denne maskine?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Starter printsystemet ved opstart"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Printsystemet (%s) vil ikke blive startet automatisk, nĺr maskinen startes "
-"op.\n"
-"Det er muligt at den automatiske opstart blev slĺet fra ved ćndring til et "
-"hřjere sikkerhedsniveau, fordi printsystemet er et muligt angrebspunkt.\n"
-"\n"
-"Řnsker du at have den automatiske opstart af printsystemet slĺet til igen?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Tjekker installeret programmel..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Fjerner LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Fjerner LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Vćlg printerkř-behandler"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket printersystem (spooler) řnsker du at bruge?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurerer printer '%s'..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installerer Foomatic..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printer-muligheder"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Forbereder PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Konfigurerer programmer..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Vil du gerne konfigurere udskrivning?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Printsystem: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"De fřlgende printere er konfigureret. Dobbeltklik pĺ en printer for at ćndre "
-"dens indstillinger; for at gřre den til standard-printer: for at se "
-"information om den; eller for at gřre en ekstern CUPS-printer tilgćngelig "
-"for Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"De fřlgende printere er konfigureret. Dobbeltklik pĺ en printer for at ćndre "
-"dens indstillinger, for at gřre den til standard-printer, eller for at se "
-"information om den."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Opfrisk printerliste (for at vise alle tilgćngelige eksterne CUPS-printere)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Ćndr printsystemet"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normal udgave"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Řnsker du at konfigurere en anden printer?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Ćndr printerkonfiguration"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s\n"
-"Hvad řnsker du at forandre pĺ, pĺ denne printer?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Gřr det!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Printeropkoblingstype"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Printernavn, beskrivelse, sted"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Printerproducent, model, driver"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Printerproducent, model"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Sćt printeren som standard-printer"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Tilfřj denne printer til Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Fjern denne printer fra Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Udskriver testsider"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Véd hvordan denne printer bruges"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Fjern printer"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Fjerner gammel printer \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Standard printer"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printeren '%s' er nu sat som standard-printer."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Tilfřjer printer til Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "Printeren \"%s\" blev tilfřjet til Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Kunne ikke tilfřje printeren \"%s\" til Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Fjerner printer fra Star Office/OpenOffice.org.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "Printeren \"%s\" blev fjernet fra Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Kunne ikke fjerne printeren \"%s\" fra Star Office/OpenOffice.org.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Řnsker du virkelig at fjerne printeren \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Fjerner printer \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Konfiguration af proxy (mellemvćrt)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Velkommen til programmet for proxy-konfigurering.\n"
-"\n"
-"Her vil du kunne opsćtte dine http- og ftp-proxyer\n"
-"med eller uden brugernavn og adgangskode\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Udfyld venligst oplysningerne om http-proxy\n"
-"Lad det vćre blankt hvis du ikke řnsker en http-proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url burde begynde med 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Port-delen břr vćre numerisk"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Udfyld venligst oplysningerne om ftp-proxy\n"
-"Lad det vćre blankt hvis du ikke řnsker en ftp-proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url burde begynde med 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Indtast brugernavn og adgangskode pĺ proxy, hvis nřdvendigt.\n"
-"Lad det vćre blankt hvis du ikke řnsker brugernavn/adgangskode"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "brugernavn"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "adgangskode"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "genindtast adgangskode"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Adgangskoderne stemmer ikke overens. Prřv igen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan ikke tilfřje en partition til _formatéret_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Kan ikke skrive filen %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fejlede"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fejlede (mĺske mangler raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partitioner til at benytte RAID level %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron en periodisk kommando planlćgger"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd bruges til at overvĺge batteristatus og skrive log til syslog.\n"
-"Den kan ogsĺ bruges til at lukke maskinen nĺr batteriet er pĺ lav."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Křrer planlagte kommandoer med 'at' kommandoen pĺ tiden specificeret da 'at' "
-"blev křrt, og křrer batch kommandoer nĺr den gennemsnitlige systembelastning "
-"er lav nok"
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX program der křrer bruger-specifikke programmer pĺ "
-"planlagte tidspunkter. Vixie cron tilfřjer en del forbedringer til den "
-"basale UNIX cron, inklusive bedre sikkerhed og stćrkere "
-"konfigurationsmuligheder."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM tilfřjer muse-support til tekst-baserede Linux applikationer sĺsom "
-"Midnight Commander. Den tillader muse-baseret kopiér-og-sćtind operationer "
-"pĺ konsollen og inkluderer support for pop-op-menuer i konsollen."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake křrer en sřgning efter maskinel, og kan konfigurere nyt/ćndret "
-"maskinel."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache er en webserver. Den bruges til at betjene HTML-filer og CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver-dćmonen (kaldet inetd) starter forskellige internet-"
-"tjenester efter behov. Den er ansvarlig for at starte tjenester som telnet, "
-"ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de tjenester, "
-"den er ansvarlig for."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kerne 2.2 serien for at opsćtte en brandmur "
-"til at beskytte din maskine mod netvćrksangreb."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakke indlćser den valgte tastatur-tabel, som valgt i /etc/sysconfig/"
-"keyboard. Dette kan vćlges i kbdconfig programmet. Dette břr vćre slĺet til "
-"pĺ de fleste maskiner."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering af kernehoved i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf vil nogen gange arrangere udfřrelse af forskellige opgaver ved "
-"opstart for at vedligeholde systemkonfigurationen."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er printer-dćmonen som er nřdvendig for at lpr virker.\n"
-"Den er basalt en server der hĺndterer udskrifts-opgaver."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuel Server, brugt til at bygge en server med hřj ydelse og\n"
-"tilgćngelighed."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) er en domćne-navneserver (DNS) der bruges til opslag af IP-"
-"adresser for vćrtsnavne."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og afmonterer alle netvćrks filsystemer (NFS), SMB (LanManager/"
-"Windows) og NCP (NetWare) monterings-stier"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle netvćrks-kort som er konfigureret\n"
-"til at starte ved opstart"
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en populćr protokol til fildeling over TCP/IP netvćrk.\n"
-"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem /etc/"
-"exports filen"
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en populćr protokol til fildeling over TCP/IP\n"
-"netvćrk. Denne service giver NFS fillĺsnings funktionalitet"
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Aktiverer automatisk numlock-tast i konsol og XFree ved\n"
-"opstart."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Střtter OKI 4w og kompatible winprintere."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA understřttelse er normalt til at understřtte ting som ethernet og "
-"modemer pĺ bćrbare. Den vil ikke blive startet medmindre den er "
-"konfigureret, sĺ det er sikkert at have den installeret pĺ maskiner der ikke "
-"har behov for den."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper hĺndterer RPC tilslutninger, som bliver brugt af protokoller som "
-"NFS og NIS. Portmap serveren skal křre pĺ maskiner som bruger protokoller "
-"der udnytter RPC mekanismen"
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix er en transport-agent for post, som bruges af programmer der flytter "
-"post fra en maskine til en anden."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Gemmer og henter systemets entropipřl for en hřjre kvalitet\n"
-"ved generering af tilfćldige tal."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Tilordn rĺ enheder til blokenheder (som harddisk-\n"
-"partitioner) til brug af applikationer som Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed dćmonen giver mulighed for automatisk IP rutetabel opdatering via RIP "
-"protokollen. RIP kan bruges til smĺ netvćrk, men nĺr det kommer til mere "
-"komplekse netvćrk er der behov for en mere kompleks protokol."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen tillader brugere pĺ et netvćrk at hente systeminformation "
-"fra enhver maskine pĺ dette netvćrk."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen tillader brugere pĺ et netvćrk a identificere\n"
-"hvem der er logget pĺ andre maskiner"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokollen tillader eksterne brugere at hente en liste over alle "
-"brugere der er logget ind pĺ en maskine, der křrer rwho dćmonen (minder om "
-"finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet pĺ din maskine"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog er en facilitet som mange dćmoner bruger til log beskeder\n"
-"Det er en god idé altid at křre syslog"
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Indlćs driverne for dine usb-enheder."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Starter X-font serveren (dette er obligatorisk for at XFree skal křre)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Vćlg hvilke tjenester der skal startes automatisk ved opstart"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Printning"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fildeling"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Ekstern administration"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Databaseserver"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjenester: %d aktiverede for %d registrerede"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Tjenester"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "křrer"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "stoppet"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Tjenester og dćmoner"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Beklager, der er ingen ekstra\n"
-"information om denne tjeneste."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ved opstart"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stop"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Tak fordi du valgte Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Velkommen til en verden af ĺben kildekode"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSofts succes er baseret pĺ princippet om frit programmel. Dit nye "
-"operativsystem er resultatet af et samarbejde i det verdensomspćndende Linux-"
-"samfund"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Vćr med i det frie programmels verden"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Kom til at kende Ĺben Kildekode-samfundet og bliv medlem. Lćr, undervis og "
-"hjćlp andre ved at vćre med i de mange diskussionsfora som du finder pĺ "
-"vores 'Samfunds'-netsider."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet og beskeder"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 giver dig det bedste programmel til at fĺ adgang til alt "
-"hvad internettet har at tilbyde. Surf pĺ nettet og se animationer med "
-"Mozilla og Konqueror, udveksl post og organiser dine personlige "
-"informationer med Evolution og Kmail, og meget mere."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedie og Grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vil kunne presse din mulitimediemaskine til det yderste! "
-"Brug det nyeste programmel til at afspille musik og lydfiler, redigér og "
-"organiser dine billeder eller foto, se tv, og videoer, og meget mere"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Udvikling"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 er den ultimative udviklingsplatform. Opdag styrken i GNU "
-"gcc-oversćtteren og de bedste Ĺben Kildekode-udviklingsmiljřer"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrolcenter"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2 kontrolcenter er et samlet sted til fuldt ud at tilpasse "
-"og konfigurere dit Mandrake-system"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Brugergrćnseflader"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux tilbyder at vćlge mellem 11 forskellige grafiske "
-"skrivebordsmiljřer og vindueshĺndteringer, inklusive GNOME 1.4, KDE 2.2.2, "
-"Window Maker og resten"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Serverprogrammel"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Lav din maskine om til en stćrk server med bare nogen fĺ klik med musen: "
-"Webserver, post, brandmur, ruter, fil- og print-server, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spil"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 tilbyder det bedste i Ĺben Kildekode-spil - arkade, kort, "
-"sport, action, strategi, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Har du lyst til at lćre Linux nemt, hurtigt og gratis? MandrakeSoft tilbyder "
-"gratis trćning i Linux, sĺ vel som en mĺde at afprřve dine fremskridt, via "
-"MandrakeCampus - vores trćningscenter pĺ nettet"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kvalitetssupport fra Linux-samfundet, og fra MandrakeSoft, er lige om "
-"hjřrnet! Og hvis du allerede er en Linux-veteran kan du blive en ekspert og "
-"dele ud af din viden pĺ vores support-netsted"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Vores konsulenter er klar for ethvert af jeres IT-projekter til at analysere "
-"jeres krav og tilbyde en tilpasset lřsning. Drag fordel af MandrakeSofts "
-"udstrakte erfaring som Linux-producent til at fremkomme med et ćgte IT-"
-"alternativ for jeres organisation."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Et komplet udvalg af Linux-lřsninger, sĺ vel som specialtilbud pĺ vores "
-"produkter og godbidder, er tilgćngelige i vores e-butik"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"For yderligere information om MandrakeSofts professionelle tjenester og "
-"kommercielle tilbud kan du se pĺ den fřlgende netside:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installerer pakker..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Jeg kan ikke lćse din partitionstabel, den er for řdelagt :(\n"
-"Jeg vil forsřge mig med at slette de beskadigede partitioner"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fejl!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Jeg kan ikke finde filen '%s' som jeg behřver."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Autoinstallationskonfigurering"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
-"er lidt farlig, og mĺ bruges med forsigtighed.\n"
-"\n"
-"Med denne mulighed vil du igen kunne křre installationen du gennemfřrte pĺ "
-"denne maskine, med muligheden for at selv kunne ćndre pĺ nogen af "
-"indstillingerne.\n"
-"\n"
-"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
-"gennemfřrt automatisk, uanset hvad du valgte under installationen.\n"
-"\n"
-"Řnsker du at fortsćtte?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguration af automatiske skridt"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vćlg for hvert skridt om det skal vćre som under installationen, eller "
-"manuelt"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Velkommen.\n"
-"\n"
-"Parametrene for autokonfigurationen kan ses i afsnittene til venstre"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Tillykke!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten er blevet genereret.\n"
-"Du kan nu gennemfřre installationen igen."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Autoinstallation"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Tilfřj et element"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Fjern det sidste element"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup Rapport \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup Dćmon-Rapport\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup Rapportdetaljer\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "total fremdrift"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sikkerhedskopiér systemfiler..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Sikkerhedskopifiler for disk..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Sikkerhedskopiér brugerfiler..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Fremdrift for sikkerhedskopiering af disk..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Sikkerhedskopiér andre filer..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"filliste sending via FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP forbindelsesproblem: Det var ikke muligt at sende dine backupfiler "
-"via FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Fejl ved afsendelse af post. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Valg af filer"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Vćlg filerne eller katalogerne og klik pĺ 'Tilfřj'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Markér alle muligheder som du behřver.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Disse valgmuligheder kan sikkerhedskopiere og genskabe alle filer i dit /etc "
-"katalog.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Lav sikkerhedkopi af dine systemfiler. ( /etc kataloget)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Medtag ikke kritiske filer (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Med denne valgmulighed vil du vćre i stand til at kunne genskabe\n"
-"enhver version af dit /etc katalog."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Markér alle brugere som du vil have med i din sikkerhedskopi."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Medtag ikke cache for netlćser"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Brug inkrementalbackup (overskriv ikke gamle sikkerhedskopier)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Fjern valgte"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Brugere"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Brug FTP forbindelse til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Indtast vćrtsnavn eller IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Indtast kataloget hvori\n"
-" sikkerhedskopien skal lćgges pĺ denne maskine."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Indtast dit brugernavn"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Indtast din adgangskode"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Husk denne adgangskode"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP forbindelse"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sikker forbindelse"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Brug CD/DVDROM til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Vćlg din cd-plads"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Markér om du bruger et CDRW-medie"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Markér om du vil slette din CDRW fřr ny skrivning"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Markér om du řnsker at medtage\n"
-" installeringsopstart pĺ din cd."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Indtast din CD-brćnders enhedsnavn\n"
-" fx: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "brug bĺnd til sikkerhedskopieringen"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Indtast endhedsnavnet der skal bruges til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Indtast den maksimale střrrelse\n"
-" tilladt for Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Indtast kataloget der skal gemmes:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Brug kvoter for sikkerhedskopieringsfiler"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Netvćrk"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Diskdrev / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "timeligt"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "dagligt"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "ugentligt"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "mĺnedligt"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Brug dćmon"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Vćlg tidsinterval mellem\n"
-"hver sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Vćlg mediet for\n"
-"sikkerhedskopiering."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Brug diskdrev med dćmon"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Brug FTP med dćmon"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Forsikr dig gerne at cron-dćmonen er med i dine tjenester."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Send epost-rapport efter hver sikkerhedskopiering til:"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Hvad"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Hvor"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Hvornĺr"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Flere muligheder"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup konfiguration"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Vćlg hvor du řnsker at sikkerhedskopiere"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "pĺ diskdrev"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "over netvćrk"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Vćlg hvad du vil sikkerhedkopiere"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Lav sikkerhedskopi af system"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Lav sikkerhedskopi af brugere"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Hĺndpluk bruger"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Kilder for sikkerhedskopi: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systemfiler:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Brugerfiler:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Andre filer:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Gem til diskdrev pĺ stien: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Gem via FTP pĺ vćrt : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t brugernavn: %s\n"
-"\t\t pĺ sti: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Muligheder:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tMedtag ikke systemfiler\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSikkerhedskopiering bruger tar og bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSikkerhedskopiering bruger tar og gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Dćmon (%s) indeholder:\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Diskdrev.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-cdrom.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Netvćrk via FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Netvćrk via SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ingen konfiguration, klik pĺ Vejleder eller Avanceret.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste over data som skal genskabes:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste over data der er řdelagt:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Afmarkér eller fjern det gerne nćste gang."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Sikkerhedskopifiler er řdelagte"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr " Alle dine valgte data er blevet "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " genskabt uden fejl pĺ %s "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr " Genskab konfiguration "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "O.k. at genskabe de andre filer."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Brugerliste at genskabe (kun den nyeste dato per bruger er vigtig)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Lav sikkerhedskopi af systemfiler fřr:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Vćlg dato for genskabning"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Brug disk til sikkerhedskopiering"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Genskab fra disk."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Indtast kataloget hvor sikkerhedskopier gemmes"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Vćlg et andet medie at genskabe fra"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Andet medie"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Genskab system"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Genskab brugere"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Genskab andet"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "vćlg sti at genskabe (i stedet for / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Lav ny sikkerhedskopi fřr genskabning (kun for inkrementalbackupper)."
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Fjern brugerkataloger fřr genskabning."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Genskab alle sikkerhedskopier"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Tilpasset genskabelse"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Hjćlp"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Forrige"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Gem"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Opbyg sikkerhedskopien"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Genskab"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Nćste"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Lav sikkerhedskopieringen fřr genskablesen af den...\n"
-" eller efterse at stien til gemning er korrekt."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-"Fejl ved sendmail.\n"
-" din rapport blev ikke sendt\n"
-" Konfigurér venligst sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Pakkeliste til installation"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Fejl ved sending af fil via FTP.\n"
-" Ret venligst din FTP-konfiguration."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Udvćlg de data du vil genskabe..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Vćlg medie for sikkerhedskopi..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Vćlg data for sikkerhedskopi..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"ingen konfigurationsfil fundet \n"
-"klik pĺ Vejleder eller Avanceret."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Under udvikling ... vent venligst:-)"
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Lav sikkerhedskopi af systemfiler"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Lav sikkerhedskopi af brugerfiler"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Lav sikkerhedskopi af andre filer"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Total fremdrift"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Filer sendes via FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Sender filer..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Dataliste som skal medtages pĺ cdrom."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Indtast hastighed pĺ cd-brćnder"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Indtast navnet pĺ enheden for din cd-brćnder (fx: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Markér om du řnsker at medtage installeringsopstart pĺ din cd."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Lav sikkerhedskopi nu ud fra konfigurationsfil"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Se konfiguration af sikkerhedskopiering."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Konfiguration med vejleder"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Avanceret konfiguration"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Lav sikkerhedskopiering nu"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" Pĺ dette trin vil Drakbackup lade dig ćndre:\n"
-"\n"
-" - Komprimeringsmĺden:\n"
-" \n"
-" Hvis du markerer bzip2-komprimering, vil du komprimere\n"
-" dine data bedre end gzip (omkring 2-10 %).\n"
-" Denne valgmulighed er ikke markeret som standard fordi\n"
-" denne komprimeringsmĺde krćver mere tid (omkring 1000% mere).\n"
-" \n"
-" - Opdateringsmĺden:\n"
-"\n"
-" Denne valgmulighed vil opdatere din backup, men denne\n"
-" valgmulighed er ikke rigtigt nyttig fordi du skal\n"
-" dekomprimere din backup fřr du kan opdatere den.\n"
-" \n"
-" - Mĺden for .backupignore:\n"
-"\n"
-" som med cvs vil Drakbackup ignorere alle referencer\n"
-" indeholdt i .backupignore-filer i hvert katalog.\n"
-" fx: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Nogle fejl under sendmail kommer fra \n"
-" en dĺrlig konfiguration af postfix. For at lřse dette skal du\n"
-" sćtte myhostname eller mydomain i /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-" - Lav sikkerhedskopi af systemfiler:\n"
-" \n"
-"\tDenne mulighed lader dig sikkerhedskopiere dit /etc katalog,\n"
-"\tsom indeholder alle konfigurationsfiler. Vćr \n"
-"\tforsigtig pĺ genskabelsestrinnet med ikke at overskrive:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Lav sikkerhedskopi af brugerfiler: \n"
-"\n"
-"\tDenne mulighed lader dig vćlge alle de brugere som du vil lave\n"
-"\tsikkerhedskopier for.\n"
-"\tFor at spare pĺ diskplads anbefales du ikke medtager netlćseres\n"
-"\tcache.\n"
-"\n"
-" - Lav sikkerhedskopi af andre filer: \n"
-"\n"
-"\tDenne mulighed lader dig tilfřje mere data som skal gemmes.\n"
-"\tMed denne sikkerhedskopieringsmĺde er det ikke muligt i řjeblikket \n"
-"\tat vćlge inkrementalbackup.\t\t\n"
-" \n"
-" - Inkrementalbackupper:\n"
-"\n"
-"\tInkrementalbackup er den stćrkeste valgmulighed for \n"
-"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
-"\talle dine data den fřrste gang, og derefter kun de ćndrede data.\n"
-"\tSĺ vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
-"\tangivet dato.\n"
-"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
-"\tsikkerhedskopier blive slettet fřr hver sikkerhedskopiering. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"beskrivelse af genskabelse:\n"
-" \n"
-"Kun den nyeste dato vil blive brugt fordi med inkrementalbackup \n"
-"er det nřdvendigt at genskabe hver gammel sikkerhedskopi én for én.\n"
-"\n"
-"Sĺ hvis du ikke řnsker at genskabe en bruger, sĺ fravćlg denne helt.\n"
-"\n"
-"Ellers kan du vćlge blot én af disse\n"
-"\n"
-" - Inkrementalbackupper:\n"
-"\n"
-"\tInkrementalbackup er den stćrkeste valgmulighed for \n"
-"\tsikkerhedskopiering. Denne mulighed lader dig sikkerhedskopiere \n"
-"\talle dine data den fřrste gang, og derefter kun de ćndrede data.\n"
-"\tSĺ vil du i genskabelsestrinnet kunne genskabe dine data fra en \n"
-"\tangivet dato.\n"
-"\tHvis du ikke har valgt denne mulighed vil alle gamle\n"
-"\tsikkerhedskopier blive slettet fřr hver sikkerhedskopiering. \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft ved DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Dette program er gratis programmel; du kan redistribuere det og/eller ćndre\n"
-"det i henhold til betingelserne i GNU General Public License, som publiceret "
-"af\n"
-"Free Software Foundation; enten version 2, eller enhver senere udgave\n"
-"af licensen.\n"
-"\n"
-"Dette program er udgivet i hĺb om at det vil vćre anvendeligt, men\n"
-"UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
-"SALGBARHED eller EGNETHED TIL ET BESTEMT FORMĹL. Se GNU\n"
-"General Public License for flere detaljer.\n"
-"\n"
-"Du skulle have modtaget en kopi af GNU General Public License\n"
-"sammen med dette program; hvis ikke, skriv til Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,\n"
-"USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Beskrivelse:\n"
-"\n"
-" Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
-" I konfigurationen kan du vćlge: \n"
-"\t- Systemfiler, \n"
-"\t- Brugeres filer, \n"
-"\t- Andre filer.\n"
-"\teller Hele dit system ... eller Andet (sĺsom Windows partitioner)\n"
-"\n"
-" Drakbackup lader dig tage sikkerhedskopier af dit system pĺ:\n"
-"\t- Ddisk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Bĺnd.\n"
-"\n"
-" Drakbackup lader dig genskabe dit system pĺ\n"
-" et katalog valgt af brugeren.\n"
-"\n"
-" Som standard vil alle sikkerhedskopier blive lagret i dit\n"
-" /var/lib/drakbackup katalog\n"
-"\n"
-" Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Genskabelsestrin:\n"
-" \n"
-" I genskabelsestrinnet vil Drakbackup fjerne dit nuvćrende katalog \n"
-" og kontrollere at alle dine backupfiler ikke er řdelagte. Det \n"
-" anbefales at du laver en sidste sikkerhedskopiering fřr genskabelse.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"beskrivelse af valgmuligheder:\n"
-"\n"
-"Vćr forsigtig nĺr du bruger ftp-backup, fordi kun \n"
-"sikkerhedskopier som er opbygget allerede bliver sendt til serveren.\n"
-"Sĺ for řjeblikket skal du bygge sikkerhedskopien pĺ din disk \n"
-"fřr den sendes til ftp-serveren.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemer med genskabelse af sikkerhedskopier:\n"
-"\n"
-"I genskabelsestrinnet vil Drakbackup kontrollere alle dine\n"
-"backupfiler fřr genskabelse af dem.\n"
-"Fřr genskabelsen vil Drakbackup fjerne \n"
-"dit nuvćrende katalog, og alle dine data vil gĺ tabt.\n"
-"Det er vigtigt at vćre forsigtig og ikke ćndre sikkerhedskopieringens\n"
-"datafiler i hĺnden.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Beskrivelse:\n"
-"\n"
-" Drakbackup bruges til at lave sikkehedskopier af dit system.\n"
-" I konfigurationen kan du vćlge \n"
-"\t- Systemfiler, \n"
-"\t- Brugeres filer, \n"
-"\t- Andre filer.\n"
-"\teller Hele dit system ... eller Andet (sĺsom Windows partitioner)\n"
-"\n"
-" Drakbackup lader dig tage sikkerhedskopier af dit system pĺ:\n"
-"\t- Ddisk.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (med autoboot, redning og autoinstallering.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Bĺnd.\n"
-"\n"
-" Drakbackup lader dig genskabe dit system pĺ\n"
-" et katalog valgt af brugeren.\n"
-"\n"
-" Som standard vil alle sikkerhedskopier blive lagret i dit\n"
-" /var/lib/drakbackup katalog\n"
-"\n"
-" Konfigurationsfil:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Genskabelsestrin:\n"
-" \n"
-" I genskabelsestrinnet vil Drakbackup fjerne dit nuvćrende katalog \n"
-" og kontrollere at alle dine backupfiler ikke er řdelagte. Det \n"
-" anbefales at du laver en sidste sikkerhedskopiering fřr genskabelse.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Installationen af %s mislykkedes. Fřlgende fejl opstod:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Sřg efter installerede skrifttyper"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Fravćlg installerede skrifttyper"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "fortolk alle skrifttyper"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "kunne ikke finde nogen skrifttyper"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "fćrdig"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "Kunne ikke finde nogen skrifttyper i dine monterede partitioner"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Genvćlg korrekte skrifttyper"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "Kunne ikke finde nogen skrifttyper.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Sřg efter skrifttyper i installeret liste"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopi af skrifttyper"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation af True Type-skrifttyper"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Vent venligst pĺ ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installation af True Type fćrdig"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konvertering af skrifttyper"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "opbyg type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referencer"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Konvertering af ttf-skrifttyper"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Konvertering af pfm-skrifttyper"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Undertryk midlertidige filer"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Genstart XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Undertryk skrifttypefiler"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "genstart af xfs"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Fřr du installerer nogen skrifttyper břr du vćre sikker pĺ at du har lov til "
-"at bruge og installere dem pĺ dit system. \n"
-"\n"
-"-Du kan installere skrifttyperne pĺ normal mĺde. I sjćldne tilfćlde kan "
-"fejlbehćftede skrifttyper fĺ din X-server til at hćnge."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Import af skrifttyper"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hent skrifttyper fra Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Afinstallér skrifttyper"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Avancerede muligheder"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Liste over skrifttyper"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Vćlg de programpakker som vil understřtte skrifttyperne:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Generelle printere"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vćlg skrifttypefilen eller -kataloget oh klik pĺ 'Tilfřj'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installationsliste"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Klik her hvis du er sikker."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Her hvis ikke."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Fravalgte alt"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Valgte alt"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Fjern liste"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Begyndelsestester"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopiér skrifttyper pĺ dit system"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installér og konvertér skrifttyper"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Efterbehandling for installering"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Fjern skrifttyper pĺ dit system"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Efterbehandling for afinstallering"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Deling af internetforbindelse"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling af internetforbindelse er slĺet til"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Deling er aktiveret.\n"
-"\n"
-"Hvad řnsker du at gřre?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "de-aktivér"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "trćd af"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "genkonfigurér"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Slĺr servere fra..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Deling af internetforbindelse er nu slĺet fra"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling af internetforbindelse er slĺet fra"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Den er de-aktiveret for nćrvćrende\n"
-"Hvad řnsker du at gřre?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "aktivér"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Aktiverer servere..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Deling af internetforbindelse er nu slĺet til"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
-"Med denne mulighed vil andre maskiner pĺ dit lokale netvćrk kunne bruge "
-"internetforbindelsen pĺ denne maskine.\n"
-"\n"
-"Bemćrk: du skal bruge en dediceret netvćrksadapter, for at lave et lokalt "
-"netvćrk (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Grćnseflade %s (benytter modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Grćnseflade %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ikke nogen netvćrksadapter i dit system!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ingen ethernet netvćrksadapter er blevet fundet pĺ dit system. Křr venligst "
-"vćrktřjet til maskinel konfiguration."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netvćrksgrćnsesnit"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Der er kun én konfigureret netvćrksadapter i dit system:\n"
-"\n"
-"%s\n"
-"\n"
-"Jeg skal til at sćtte dit lokalnet pĺ med den adapter."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Vćlg hvilken netvćrksadapter som skal forbindes til dit lokalnet."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Netvćrksgrćnsesnit allerede konfigureret"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Advarsel, netvćrkskortet (%s) er allerede konfigureret.\n"
-"\n"
-"Řnsker du en automatisk re-konfiguration?\n"
-"\n"
-"Du kan gřre det i hĺnden, men du skal vide hvad du gřr."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatisk rekonfiguration"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Vis aktuelle grćnsesnitskonfiguration"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Nuvćrende konfiguration af `%s':\n"
-"\n"
-"Netvćrk: %s\n"
-"IP-adresse: %s\n"
-"IP-attribut: %s\n"
-"Driver: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Jeg kan beholde din aktuelle konfiguration og antage at du allerede har sat "
-"en DHCP-server op; i sĺ tilfćlde kontrollér da gerne at jeg har lćst det C-"
-"klasse-netvćrk korrekt, som du bruger for dit lokalnetvćrk; jeg vil ikke "
-"genkonfigurere det og jeg vil ikke rřre ved din konfiguration af DHCP-"
-"serveren.\n"
-"\n"
-"Ellers kan jeg genkonfigurere dit grćnsesnit og genkonfigurere en DHCP-"
-"server for dig.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-klasse lokalnetvćrk"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Denne) DHCP-servers IP-adresse"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Rekonfigurér grćnsesnit og DHCP-server"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalnetvćrket endte ikke med `.0', stĺr af."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Brandmurkonfiguration fundet!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
-"muligvis lave manuelle rettelser efter installationen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurerer..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer skript, installerer programmel, starter servere..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer med installation af %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Alt er blevet konfigureret.\n"
-"Du kan nu dele din internetforbindelse med andre maskiner pĺ dit lokale "
-"netvćrk, ved at bruge DHCP."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Indstilling er allerede gjort. men er de-aktiveret for nćrvćrende."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Indstilling er allerede gjort. og er for nćrvćrende aktiv."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Deling af Internetforbindelse har aldrig vćret konfigureret."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Konfiguration af deling af internetforbindelse"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Velkommen til vćrktřjet til deling af internetforbindelse!\n"
-"%s\n"
-"\n"
-"Klik pĺ Konfigurér for at starte programmet til at dele din "
-"internetforbindelse!"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netvćrkskonfiguration (%d adaptorer)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Slet profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil der skal slettes:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Ny profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Navnet pĺ profilen der skal oprettes (den nye profil oprettes som en \n"
-"kopi af den nuvćrende) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Vćrtsnavn: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetadgang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Type:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Grćnseflade:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Vent venligst"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfigurér Internetadgang..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN konfiguration"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Drivprogram"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Grćnseflade"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfigurér lokalnetvćrk..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Klik her for at starte vejlederen ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Vejleder..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Anvend"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Vent venligst... Sćtter konfigurationen i anvendelse"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Tilsluttet"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ikke tilsluttet"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Tilslut..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Afbrud..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Advarsel, en anden internetforbindelse er blevet fundet, der mĺske bruger "
-"dit netvćrk"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerede grćnsesnit.\n"
-"Konfigurér disse fřrst ved at klikke pĺ 'Konfigurér'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN konfiguration"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Opstartsprotokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Startede med opstart"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivér nu"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivér nu"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Dette grćnsesnit er ikke blevet konfigureret endnu.\n"
-"Start konfigurationsvejlederen i hovedvinduet"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen internet-opkobling.\n"
-"Opret én fřrst ved at klikke pĺ 'Konfigurér'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Type af forbindelse"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametre"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet-kort"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Indstiller sikkerhedsniveau"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolcenter"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Vćlg det vćrktřj du řnsker at benytte"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Řsteuropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Vesteuropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australien"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "New Zealand"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Sydafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Indtast din tv-standard og land"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV-standard:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Omrĺde:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Skanning for tv-kanaler i gang..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Skanner for tv-kanaler"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Intet tv-kort genkendt!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Intet tv-kort blev genkendt pĺ din maskine. Tjek venligst at et video/tv-"
-"kort der understřttes af Linux er korrekt isat.\n"
-"\n"
-"\n"
-"Du kan besřge vores database over udstyr pĺ:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "brug: keyboarddrake [--expert] [tastatur]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Vćlg tastaturlayout."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Skift cdrom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Indsćt installations-cdrom'en i dit cdrom-drev og tryk pĺ Ok, nĺr det gjort\n"
-"Hvis du ikke har den - tryk pĺ Annullér, sĺ undgĺs levende opgradering"
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kan ikke starte levende opgradering!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Ćndringen er fortaget, men for at vćre effektiv skal du logge ud"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Vis kun for den valgte dag"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fil/_Ny"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<Ctrl>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fil/_Ĺbn"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<Ctrl>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fil/_Gem"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<Ctrl>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fil/Gem _som"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fil/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Indstillinger"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Indstillinger/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Hjćlp"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Hjćlp/_Om"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Bruger"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Beskeder"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "System"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Forklaringer til Mandrake-vćrktřjer"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "sřg"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Et vćrktřj til at overvĺge dine logfiler"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Indstillinger"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "Samstemmende:"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "Men ikke samstemmende"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Vćlg fil"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Indhold af filen"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Post og SMS pĺmindelse"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vent venligst, fortolker filen: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Post og SMS pĺmindelseskonfiguration"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Velkommen til programmet for post og SMS-konfigurering.\n"
-"\n"
-"Her vil du kunne opsćtte pĺmindelsessystemet\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "Opsćtning af tjenester"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Du vil modtage en advarsel hvis en af de valgte tjenester ikke lćngere křrer"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "indlćs opsćtning"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Du vil modtage en advarsel hvis belastningen er hřjere end denne vćrdi"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "advarsels-konfiguration"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Konfigurerer mĺden systemet vil advare dig pĺ"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Gem som..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Vćlg muse-type."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ingen seriel_usb fundet\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emulering af tredje knap?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s fundet pĺ %s, skal det konfigureres?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Vćlg en skanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Denne %s-skanner er ikke understřttet"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake kunne ikke genkende din %s-skanner.\n"
-"Vćlg venligst den enhed hvor din skanner er isat"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "vćlg enhed"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Denne %s-skanner skal vćre konfigureret af printerdrake.\n"
-"Du kan starte printerdrake fra Mandrake Kontrolcenter i Udstyr-afsnittet."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Din %s-skanner er blevet konfigureret.\n"
-"Du kan nu skanne dokumenter med 'XSane' fra Multimedie/grafik iprogrammenuen."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Brandmurskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Brandmurskonfiguration"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Brandmure\n"
-"\n"
-"Du har allerede indstillet en brandmur.\n"
-"Klik pĺ Konfigurér for at ćndre eller fjerne brandmuren"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Brandmure\n"
-"\n"
-"Klik pĺ Konfigurér for at sćtte en standard-brandmur op"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Vćlg sprog"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Vćlg installations-metode"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Harddisk bestemmelse"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfigurér mus"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Vćlg tastatur"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sikkerhed"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Vćlg filsystemer"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatér partitioner"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Vćlg pakker til installation"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installér system"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tilfřj bruger"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfigurér netvćrk"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfigurér tjenester"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Installér systemopstarter"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Opret opstartsdiskette"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfigurér X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Installér opdateringer"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Afslut installation"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall-konfigurator\n"
-"\n"
-"Dette konfigurerer en personlig brandmur for denne Mandrake Linux maskine.\n"
-"For en stćrk dedikeret brandmurs-lřsning se venligst den specialiserede "
-"MandrakeSecurity Firewall-distribution."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Vi vil nu spřrge dig om hvilke tjenester du gerne vil tillade\n"
-"internettet at forbinde til. Tćnk grundigt over disse\n"
-"spřrgsmĺl, da din maskines sikkerhed er vigtig.\n"
-"\n"
-"Hvis du ikke bruger nogle af disse tjenester sĺ skćrm dem af\n"
-"med brandmuren. Du kan altid ćndre indstillingerne nĺr du vil\n"
-"ved at křre dette program igen!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Křrer du en webserver pĺ denne maskine som du har brug for at hele\n"
-"internettet kan se? Hvis du křrer en webserver som kun behřver at blive\n"
-"tilgĺet af denne maskine kan du roligt svare NEJ her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Křrer du en DNS-navneserver pĺ denne maskine? Hvis du ikke har sat\n"
-"en op til at give IP- og zone-information til hele internettet kan du svare\n"
-"nej her.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Řnsker du at tillade indgĺende Secure Shell ssh-forbindelser?\n"
-"Det er en erstatning for telnet som du mĺske vil bruge til at logge ind.\n"
-"Hvis du bruger telnet nu břr du afgjort skifte til ssh. telnet er ikke\n"
-"krypteret - sĺ nogle angribere kan stjćle din adgangskode hvis du bruger\n"
-"den. ssh er krypteret og tillader ikke den slags aflytning."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Vil du tillade indgĺende telnet-forbindelser?\n"
-"Dette er virkeligt usikkert som vi har forklaret i det foregĺende billede. "
-"Vi\n"
-"anbefaler stćrkt at du svarer NEJ her og bruger ssh i stedet for telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Křrer du en FTP-tjeneste pĺ denne maskine som du har brug for at hele\n"
-"internettet har adgang til? Hvis du har sĺ anbefaler vi stćrkt at du kun\n"
-"bruger den til anonyme overfřrsler. En hvilkensomhelst adgangskode sendt\n"
-"over FTP kan stjćles af visse angribere, siden FTP heller ikke bruger\n"
-"kryptering til at overfřre adgangskoder.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Křrer du en post-server her? Hvis du sender beskeder med\n"
-"pine, mutt eller en anden tekstbaseret post-klient er det sandsynligt.\n"
-"Ellers břr du skćrme den vćk.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Křrer du en POP- eller IMAP-tjeneste her? Dette kan bruges til at betjene "
-"ikke-webbaserede postkonti for folk via denne maskine.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Du ser ud til at křre en 2.2-kerne. Hvis din IP-netvćrksadresse\n"
-"bliver sat automatisk af en maskine i dit hjem eller kontor\n"
-"(dynamisk tildelt) břr vi tillade dette. Er dette tilfćldet?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Fĺr din maskine tiden synkroniseret efter en anden maskine?\n"
-"Oftest er dette brugt af střrre Unix/Linux-organisationer for at\n"
-"synkronisere tiden for logning og lignende. Hvis du ikke er en del\n"
-"af et střrre kontor og ikke har hřrt om dette er det sandsynligvis\n"
-"ikke tilfćldet."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurationen er fćrdig. Skal vi skrive disse ćndringer til disken?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Kan ikke ĺbne %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Kan ikke ĺbne %s for skrivning: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nej, jeg har ikke brug for DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ja, jeg har brug for DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nej, jeg har ikke brug for NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ja, jeg har brug for NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Gem ikke"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Gem og afslut"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Vejleder til brandmurskonfiguration"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nej (sćt en brandmur op mod internettet)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Nej (tillad dette gennem brandmuren)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Vent venligst..., kontrollerer installerede pakker"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Kunne ikke installere de krćvede pakker: %s og Bastille.\n"
-" Prřv at installere dem manuelt."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netvćrksmaskine (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-vćrt, SMB-vćrt, mellemvćrt (proxy), SSH-vćrt"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Vćrktřjer til Palm Pilot og Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Brandmur/router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Server for domćnenavne (DNS) og netvćrksinformation (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontor-programmer: Tekstbehandler (kword, abiword), regneark (kspread, "
-"gnumeric), pdf-visere, o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Lyd-relaterede vćrktřjer: mp3 eller midi-afspillere, mixere o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Břger og vejledninger om Linux og Frit Programmel"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedie - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Samling af vćrktřjer til post, nyheder, filoverfřrsel og chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Database"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL eller MySQL database-server"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Vćrktřjer til at lette indstillingen af din maskine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedie - Lyd"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Vćrktřjer"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolvćrktřjer"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix postserver, Inn nyhedsserver"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-station"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedie-station"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Flere grafiske miljřer (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop -miljřet, det grundlćggende grafiske miljř, med en vifte af "
-"supplerende vćrktřjer."
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafisk miljř"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Vćrktřjer til at skabe og brćnde CD-er"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontor-arbejdsstation"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, o.lign."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiske programmer som fx The Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C og C++ udviklingsbiblioteker, programmer, og include-filer."
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netvćrksmaskine server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/diskussionsgrupper"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spillemaskine"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videoafspillere og redigeringsvćrktřjer"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedie - Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underholdnings-programmer: arkade, brćt, strategi, osv."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Vćrktřjssćt til at lćse samt sende post og nyheder (pine, mutt, tin..) , og "
-"til at browse pĺ nettet"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arkivering, emulering, overvĺgning"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Personlig řkonomi"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Et grafisk miljř med brugervenlig samling af programmer og vćrktřjer"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter for forskellige protokoller inklusiv ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetadgang"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Lyd- og video-afspillere og redigeringsvćrktřjer"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andre grafiske miljřer"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redigeringsvćrktřjer, skaller, filvćrktřjer, terminaler"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmer til at hĺndtere din řkonomi, som fx gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Personlig informationshĺndtering"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedie - CD-brćnding"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Videnskabelig arbejdsstation"
-
-#~ msgid "About"
-#~ msgstr "Om"
-
-#~ msgid " Help "
-#~ msgstr " Hjćlp "
-
-#~ msgid ""
-#~ "XawTV isn't installed ...\n"
-#~ "You should install it.\n"
-#~ " Just type \"urpmi xawtv\""
-#~ msgstr ""
-#~ "XawTV er ikke installeret ...\n"
-#~ "Dř břr installere den.\n"
-#~ " Bare skriv \"urpmi xawtv\""
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr ""
-#~ "Kan ikke fĺ fat i kernemoduler svarende til din kerne (fil %s mangler)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ingenting"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Vćlg en forvalgt printer!"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Brug/Opfrisk printerliste"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Du kan nu give dens parametre til modul %s."
-
-#~ msgid "mount failed"
-#~ msgstr "montering mislykkedes"
-
-#~ msgid ""
-#~ "The characters of your language can't be displayed in console,\n"
-#~ "so the messages will be displayed in english during installation"
-#~ msgstr ""
-#~ "Tegnene i dit sprog kan ikke vises i konsollen\n"
-#~ "sĺ beskederne vil blive vist pĺ engelsk under installationen"
diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
deleted file mode 100644
index 9629e8953..000000000
--- a/perl-install/share/po/de.po
+++ /dev/null
@@ -1,12653 +0,0 @@
-# german translation of DrakX (cooker/gi/perl-install/share/po/de.po).
-# Copyright (C) 1999,2000,2001 MandrakeSoft.
-# Dr. Hinrich GĂśhlmann <hgoehlmann@gmx.de>, 1999,2000
-# Stefan Siegel <siegel@linux-mandrake.com>, 1999,2000,2001,2002
-# Daniel Haischt <daniel.haischt@student.fh-reutlingen.de>, 2000
-# Peer Dunker <peer46@gmx.net>, 2001
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-10 11:56+0100\n"
-"Last-Translator: Stefan Siegel <siegel@linux-mandrake.com>\n"
-"Language-Team: German <cooker-i18n@linux-mandrake.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Alle Karten getrennt konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Xinerama Erweiterung verwenden"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Nur Karte „%s“ (%s) konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Mehrkarten-Einstellung"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ihr System erlaubt die Verwendung einer Mehrkarten Konfiguration.\n"
-"Was wollen Sie tun?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Wählen Sie Ihre Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Wählen Sie einen X Server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X Server"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Wählen Sie einen X Treiber"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X Treiber"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Welche XFree-Konfiguration wollen Sie verwenden?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ihre Grafikkarte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. Ihre Karte wird auch von XFree %s unterstĂźtzt, wodurch Sie \n"
-"bessere 2D-UnterstĂźtzung erhalten kĂśnnen."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Ihre Grafikkarte kann mit XFree %s 3D-hardwarebeschleunigt werden."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s mit 3D-Hardwarebeschleunigung"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM \n"
-"UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s mit EXPERIMENTELLER 3D-Hardwarebeschleunigung"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"XFree %s. BEM: DIESE FUNKTION IST NOCH IM EXPERIMENTIERSTADIUM UND KANN \n"
-"ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN. Ihre Karte wird auch von \n"
-"XFree %s unterstĂźtzt, wodurch Sie bessere 2D-UnterstĂźtzung erhalten \n"
-"kĂśnnen."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Installationsbildschirmtreiber)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigurieren"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Wählen Sie die Speichergröße Ihrer Grafikkarte"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Wählen Sie die Einstellungen fßr den Server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Wählen Sie Ihren Monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die beiden kritischen Parameter sind die vertikale Wiederholfrequenz\n"
-"(wie oft der gesamte Bildschirm neu angezeigt wird) und insbesondere die\n"
-"horizontale Synchronisationsfrequenz (wie oft Scanlinien angezeigt werden).\n"
-"Es ist SEHR WICHTIG, dass Sie keinen Monitortyp mit einer falschen \n"
-"Synchronisationsrate auswählen, da Sie sonst Ihren Monitor beschädigen \n"
-"kÜnnten. Im Zweifelsfall wählen Sie bitte eine konservativere \n"
-"Einstellung."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontale Wiederholfrequenz"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikale Wiederholfrequenz"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ihr Monitor ist nicht konfiguriert"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ihre Grafikkarte ist noch nicht konfiguriert"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Die AuflÜsungen wurden noch nicht ausgewählt"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "MĂśchten Sie die vorgenommenen Einstellungen prĂźfen?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Warnung: Testen dieser Grafikkarte kann Ihren Rechner anhalten"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "PrĂźfen der Einstellungen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"Versuchen Sie bitte, einige Einstellungen zu ändern"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ein Fehler ist aufgetreten:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Verlassen in %d Sekunden"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ist dies richtig?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-"Ein Fehler ist aufgetreten. Versuchen Sie bitte, einige Parameter zu ändern"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "AuflĂśsung"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Wählen Sie bitte AuflÜsung und Farbtiefe"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikkarte: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 Server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mehr"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Experten-Modus"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Alle anzeigen"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "AuflĂśsungen"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastaturtyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Maustyp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Mausschnittstelle: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horiz. Frequenz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor Vert. Frequenz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafikkarte: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafikkartenidentifikation: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafikkartenspeicher: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farbtiefe: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "AuflĂśsung: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 Server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 Treiber: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window Konfiguration vorbereiten"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Was wollen Sie machen?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Monitor ändern"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Grafikkarte ändern"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Server Einstellungen ändern"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "AuflÜsung ändern"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Informationen anzeigen"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Nochmals testen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Verlassen"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Die Änderungen beibehalten?\n"
-"Momentan wäre dies:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X zur Startzeit"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass bei jedem Systemstart\n"
-"automatisch die grafische Oberfläche (= der X Server) aktiviert wird.\n"
-"Wollen Sie, dass X nach jedem Neustart direkt zur VerfĂźgung steht?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-"Bitte loggen Sie sich erneut in %s ein, \n"
-"um die Änderungen wirksam werden zu lassen."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Bitte loggen Sie sich aus, und drĂźcken Sie Ctrl-Alt-RĂźcktaste"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 Farben (8 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 Farben (15 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 Farben (16 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 Millionen Farben (24 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 Milliarden Farben (32 Bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB oder mehr"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640×480 bei 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800×600 bei 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibel, 1024×768 bei 87 Hz, interlaced (kein 800×600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024×768 bei 87 Hz, interlaced und 800×600 bei 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800×600 bei 60 Hz und 640×480 bei 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024×768 bei 60 Hz und 800×600 bei 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Hochfrequenz SVGA, 1024×768 bei 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Mehrfrequenz mit der Fähigkeit für 1280×1024 bei 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ihr Monitor kann 1600×1200 bei 70 Hz darstellen"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ihr Monitor kann 1600×1200 bei 76 Hz darstellen"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Erster Sektor der Boot-Partition"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Erster Sektor der Platte (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Installation"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Wo soll der Betriebssystemstarter installiert werden?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/Grub Installation"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO mit TextmenĂź"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO mit grafischem MenĂź"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Boot von DOS/Windows aus (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Haupt-Optionen des Betriebssystemstarters"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Zu verwendender Betriebssystemstarter"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installation des Betriebssystemstarters"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot Gerät"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (funktioniert nicht mit alten BIOS Versionen)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video Modus"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Wartezeit vorm Starten des Standard Betriebssystems"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Passwort"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Passwort (erneut)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Gebrauch der Kommandozeilen-Parameter einschränken"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "Einschränken"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Die Partition /tmp bei jedem Systemstart säubern"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Geben Sie, falls nötig, die genaue RAM Größe an (%d MB gefunden)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Mehrere Profile einschalten"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Geben Sie die RAM Größe in MB an"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Die Option „Gebrauch der Kommandozeilen-Parameter einschränken“ ist ohne \n"
-"Angabe eines Passworts wirkungslos"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Bitte versuchen Sie es erneut"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Die PasswĂśrter stimmen nicht Ăźberein"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init Nachricht"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware VerzĂśgerung"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "BS-StartverzĂśgerung fĂźr den Kern"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "BS-Start von CD erlauben"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Open Firmware Start erlauben"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Standard BS"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Sie haben sich entschieden, Ihren Betriebssystemstarter auf einer Partition "
-"zu starten.\n"
-"Das impliziert, dass Sie einen anderen Betriebssystemstarter im Master-Boot-"
-"Record haben (etwa System Commander).\n"
-"\n"
-"Von welchem Verzeichnis wollen Sie starten?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hier sind die verschiedenen Einträge.\n"
-"Sie kÜnnen weitere hinzufßgen oder existierende ändern."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "HinzufĂźgen"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Fertig"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ändern"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Welche Art Eintrag wollen Sie hinzufĂźgen?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Anderes Betriebssystem (SunOS ...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Anderes Betriebssystem (MacOS ...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Anderes Betriebssystem (Windows ...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Kern"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Übergeben"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Init-RamDisk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Schreiben/Lesen"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabelle"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Unsicher"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Identifikator"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Standard"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Größe der Init-RamDisk"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Eintrag lĂśschen"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Leere Einträge sind nicht erlaubt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Sie MĂźssen ein Kern-Abbild angeben"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Sie mĂźssen die Verzeichnisbaumwurzel festlegen"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Dieser Eintrag existiert bereits"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Schnittstelle(n) %s %s gefunden"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "VerfĂźgen Sie Ăźber weitere?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "VerfĂźgen Sie Ăźber %s Schnittstellen?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nein"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Ja"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Hardware Informationen anzeigen"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation des Treibers fĂźr die Karte %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(Modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welchen %s-Treiber soll ich versuchen?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In einigen Fällen benötigt der „%s“ Treiber zusätzliche Informationen,\n"
-"um korrekt zu funktionieren, meistens sollte er jedoch auch ohne \n"
-"funktionieren. Wollen Sie solche Informationen angeben oder es dem Treiber "
-"Ăźberlassen, nach geeigneten Parametern zu suchen? (Das Austesten durch den "
-"Treiber kann in seltenen Fällen zum „Hängenbleiben“ des Rechners führen, was "
-"jedoch keine Hardwareschäden nach sich ziehen sollte)"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatische Erkennung"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Optionen angeben"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sie mĂźssen nun die Optionen fĂźr Modul %s angeben.\n"
-"Bedenken Sie, dass Adressen alle mit „0x“ beginnen müssen, etwa „0x300“"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sie mĂźssen nun die Optionen fĂźr Modul %s angeben.\n"
-"Optionen haben die Form „name=wert name2=wert2“.\n"
-"Beispielsweise: „io=0x300 irq=7“"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modul-Optionen:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laden von Modul %s schlug Fehl.\n"
-"Wollen Sie es erneut mit anderen Parametern versuchen?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "Zugriff auf X-Programme"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "Zugriff auf RPM-Werkzeuge"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "„su“ erlauben"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "Zugriff auf Verwaltungsdateien"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s wurde bereits hinzugefĂźgt)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Dieses Passwort ist zu einfach"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Bitte geben Sie ein Benutzerkennzeichen an"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Das Benutzerkennzeichen sollte nur aus Kleinbuchstaben, Ziffern, \n"
-"„-“ und „_“ bestehen"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Dieses Benutzerkennzeichen existiert bereits"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Benutzer hinzufĂźgen"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Benutzerkennzeichen einrichten\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Benutzer akzeptieren"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Benutzername"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Benutzerkennzeichen"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Symbol"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass beim Systemstart automatisch \n"
-"ein Benutzer angemeldet wird.\n"
-"Wollen Sie davon Gebrauch machen?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Wählen Sie den Standard-Nutzer:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Wählen Sie den Window-Manager, den Sie verwenden wollen:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Bitte wählen Sie die zu verwendende Sprache."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Sie kÜnnen andere Sprachen auswählen, die nach der Installation zur "
-"VerfĂźgung stehen."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Alle"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Allen Benutzern erlauben"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Benutzerdefiniert"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Kein Teilen"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Das Paket %s muss installiert sein. Soll ich es installieren?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"Sie kĂśnnen die Dateien mittels Samba oder NFS anbieten. Welche Variante "
-"wollen Sie?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Das zwingend benötigte Paket „%s“ fehlt."
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Wollen Sie Benutzern erlaubern, Verzeichnisse freizugeben?\n"
-"Wenn Sie das erlauben, kĂśnnen die Anwender Verzeichnisse in Konqueror oder "
-"Nautilus im KontextmenĂź der eintsprechenden Verzeichnisses freigeben.\n"
-"\n"
-"Mit „Benutzerdefiniert“ können Sie eine Einstellung pro Kennzeichen "
-"vornehmen.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Abbruch"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Userdrake starten"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Das Teilen zwichen Benutzern verwendet die Gruppe „fileshare“.\n"
-"Sie kĂśnnen UserDrake verwenden, um Benutzerkennzeichen in diese Gruppe "
-"aufzunehmen."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Cracker-Spielplatz"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Schwach"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Hoch"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "HĂśher"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Diese Ebene ist mit Vorsicht zu verwenden. Zwar macht sie Ihr System \n"
-"einfacher handhabbar, aber auch leichter angreifbar: In dieser Form darf \n"
-"der Rechner nicht als Netzwerkrechner (LAN oder Modem) verwendet werden, \n"
-"da Angreifer mangels Passwort an Ihre Daten gelangen kĂśnnen!"
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Passwortabfragen sind nun eingeschaltet, aber die Verwendung als \n"
-"Netzwerkrechner kann hier nicht empfohlen werden."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Das ist die Standard-Sicherheitsebene fĂźr Rechner, mit Internetzugang \n"
-"als Klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Es gibt bereits mehr Restriktionen und jede Nacht werden automatische "
-"Sicherheitstests durchgefĂźhrt."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Mit dieser Sicherheitsebene wird es mĂśglich, das System als einen \n"
-"Server zu verwenden.\n"
-"Die Sicherheit ist nun ausreichend hoch, um das System als Server \n"
-"einzusetzen, der einer Vielzahl von Klienten einen Verbindungsaufbau \n"
-"erlaubt. Es sei hier angemerkt, dass Ihr Rechner, wenn Sie nur als \n"
-"Klient ins Internet gehen, besser eine niedrigere Sicherhetsebene \n"
-"verwenden sollte."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Diese Ebene bietet die selbe Funktionalität, wie die vorherige. Jedoch ist \n"
-"das System nun komplett geschlossen. Es ist die hĂśchste Sicherheitsebene."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Wählen Sie eine Sicherheitsebene"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sicherheitsebene"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "„libsafe“ bei Servern verwenden"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Eine Bibliothek, die gegen sog. „buffer overflow“-Angriffe schützt."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Willkommen zum Betriebssystem-Starter %s\n"
-"\n"
-"Markieren Sie in obiger Liste ein Betriebssystem\n"
-"oder warten Sie %d Sekunden, dann starte ich Ihr Standard-System.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Willkommen zum Betriebssystem-Starter GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Verwenden Sie die Tasten %c und %c um ein Betriebssystem zu w„hlen."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Zum Starten des BS drcken Sie <Return>. Mit <e> k”nnen Sie das"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "Kommando vorher editieren, mit <c> erhalten Sie eine Kommandozeile."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "In %d Sekunden wird das gew„hlte BS automatisch gestartet."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "Sie haben nicht genug Platz in „/boot“"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Arbeitsoberfläche"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start-MenĂź"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Sie kĂśnnen den Betriebssystemstarter\n"
-"nicht auf einer %s Partition installieren!\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "Es steht noch keine Hilfe zur VerfĂźgung.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Konfiguration der Boot-Einstellungen"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datei"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datei/_Beenden"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Neuer kategorisierter Monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Neuer Stil"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "HerkĂśmmlicher Stil"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "HerkĂśmmlicher Gtk+ Stil"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Aurora beim Hochfahren starten"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB Modus"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot Modus"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Sie verwenden momentan „%s“ als Betriebssystemstarter.\n"
-"Wählen Sie „Konfigurieren“, wenn Sie den Assistenten starten wollen."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfigurieren"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "System-Modus"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "X-Window nach dem Hochfahren automatisch starten "
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Nein ich will kein Autologin"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja ich will Autologin mit diesem Kennzeichen und dieser Oberfläche"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Ich kann „/etc/inittab“ nicht zum lesen öffnen: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d Minuten"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 Minute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d Sekunden"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr ""
-"Vor der Partitionierung kann ich keine Bildschim-SchnappschĂźsse machen."
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Die Bildschim-Schnappschüsse liegen nach der Installation unter „%s“"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frankreich"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgien"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Tschechische Republik"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Deutschland"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Griechenland"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norwegen"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Schweden"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holland"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italien"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Östereich"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Bitte machen Sie erst eine Sicherheitskopie Ihrer Daten!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lesen Sie bitte aufmerksam!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Wenn Sie aboot verwenden wollen, mĂźssen Sie ausreichend Platz am Anfang \n"
-"der Platte lassen (2048 Sektoren reichen aus)."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Fehler"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistent"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Wählen Sie ein Aktion aus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Sie haben eine große FAT Partition \n"
-"(diese enthält häufig nur Microsoft DOS/Windows).\n"
-"Ich rate Ihnen, diese Partition erst zu verkleinern\n"
-"(Wählen Sie sie an und drücken Sie dann „Größe verändern“)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Bitte klicken Sie auf eine Partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Details"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalisierendes FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Auslagerung"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Leer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Andere"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Dateisystemtypen:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Erzeugen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Typ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Verwenden Sie stattdessen „%s“"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "LĂśschen"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Verwenden Sie erst „umount“"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Änderung des Partitionstyps von %s, werden sämtliche Daten darauf "
-"gelĂśscht"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Wählen Sie eine Partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Wählen Sie eine andere Partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Verlassen"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "In den Experten-Modus wechseln"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "In den Normal-Modus wechseln"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Rßckgängig"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Beenden ohne speichern"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Beenden ohne die Partitionstabelle zu speichern?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Möchten Sie die vorgenommenen Änderungen in „/etc/fstab“ speichern?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatisches Erstellen"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Alles lĂśschen"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Festplatten-Informationen"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Alle Primärpartitionen sind in Gebrauch"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ich kann keinen weiteren Partitionen hinzufĂźgen"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Um mehr Partitionen einrichten zu kÜnnen, mßssen Sie zunächst eine Partition "
-"löschen und anschließend eine erweiterte Partition erzeugen"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Partitionstabelle schreiben"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Partitionstabelle wiederherstellen"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Partitionstabelle retten"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Partitionstabelle neu laden"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Wechselmedien automatisch Einhängen"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Datei auswählen"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die gesicherte Partitionstabelle hat nicht dieselbe Größe\n"
-"Soll trotzdem fortgefahren werden?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Warnung"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Legen Sie eine Diskette in das Laufwerk\n"
-"Alle Daten auf dieser Diskette werden gelĂśscht!"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Ich Versuche, die Partitionstabelle zu retten"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "AusfĂźhrliche Informationen"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Einhängpunkt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Optionen"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Größe verändern"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Bewegen"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatieren"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Einhängen"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Zum RAID hinzufĂźgen"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Zum LVM hinzufĂźgen"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Aushängen"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "LĂśschen aus dem RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "LĂśschen aus dem LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID modifizieren"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Als Loopback verwenden"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Erzeuge eine neue Partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Anfangssektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Größe in MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Dateisystemtyp: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Einhängpunkt: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Einstellung: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Die Loopback-Datei entfernen?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Partitionstyp ändern"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Welches Dateisystem wollen Sie verwenden?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertiere ext2 zu ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Wo wollen Sie die Loopback-Datei %s einhängen?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Wo wollen Sie das Gerät %s einhängen?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ich kann diesen Einhängpunkt nicht zurßcksetzen, da diese Partition als \n"
-"Loopback verwendet wird. Bitte entfernen Sie erst diesen Loopback."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Errechne die Grenzen des FAT Dateisystems"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Neuberechnen der Größe"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Die Größe dieser Partition kann ich nicht ändern"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Sie sollten ein Backup sämtlicher Daten dieser Partition erstellen"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Durch Veränderung der Partitionsgröße von %s, gehen sämtliche Daten darauf "
-"verloren"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Wählen Sie die neue Größe"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Neue Größe in MB:"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Zu welcher Platte wollen Sie wechseln?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Zu welchem Sektor wollen Sie wechseln?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "wechsele"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Bewege Partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Wählen Sie einen vorhandenen RAID"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "Neu"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Wählen Sie einen vorhandenen LVM"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM Name?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Diese Partition kann nicht als Loopback verwendet werden"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Name der Loopback-Datei: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dateinamen angeben"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Diese Datei wird bereits von einer anderen Loopback-VerknĂźpfung verwendet, "
-"wählen Sie eine andere Datei."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr ""
-"Es existiert bereits eine Datei mit diesem Namen. Soll ich sie verwenden?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Einhäng-Optionen"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Verschiedene"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "Gerät"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "Level"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Blockgröße"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vorsicht: Diese Aktion ist gefährlich."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Welcher Partitionstyp?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Es tut mir Leid, aber ich weigere mich, eine „/boot“ Partition \n"
-"hinter dem Zylinder 1024 anzulegen.\n"
-"Entweder verwenden Sie LILO und es wird nicht funktionieren, oder Sie "
-"verwenden \n"
-"LILO nicht, dann benötigen Sie keine „/boot“ Partition."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Die Partition, die Sie als Verzeichnisbaumwurzel (/) ausgewählt haben, ist "
-"physikalisch hinter dem 1024ten Zylinder Ihrer Festplatte gelegen und Sie "
-"haben keine „/boot“ Partition eingerichtet. Falls Sie den LILO "
-"Betriebssystemstarter einsetzen wollen, vergessen Sie bitte nicht, eine „/"
-"boot“ Partition anzulegen!"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Sie haben eine Software-RAID-Partition als Verzeichnisbaumwurzel "
-"ausgewählt. \n"
-"Zur Zeit kann kein Betriebssystemstarter damit ohne Verwendung einer \n"
-"„/boot“-Partition arbeiten. Sie sollten also daran denken, eine solche \n"
-"Partition zu erstellen."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Die Partitionstabelle der Platte „%s“ wird gespeichert!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Sie mßssen Ihren Rechner neu starten, damit die Veränderungen wirksam werden"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Formatieren der Partition %s, werden sämtliche Daten darauf gelÜscht"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiere"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiere Loopback-Datei %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiere Partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Dateien verstecken"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Das Verzeichnis „%s“ enthält bereits Daten\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben."
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiere: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Entferne: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Die Partition %s heißt nun %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Gerät: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS Laufwerksbuchstabe: %s (vermutlich?)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Typ:"
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Name: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Anfang: Sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Größe: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s Sektoren"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Zylinder %d bis %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatiert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nicht formatiert\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Eingehängt\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback Datei(en):\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition wird standardmäßig geladen\n"
-" (fĂźr MS-DOS Boot, nicht jedoch fĂźr LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Level %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Blockgröße %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID Platten %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Dateiname des Loopbacks: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Es besteht die Wahrscheinlichkeit,\n"
-"dass es sich um eine Treiber-\n"
-"Partition handelt. Sie sollten sie\n"
-"daher unverändert lassen.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Diese spezielle Start-Partition\n"
-"ist fĂźr die Verwendung mehrerer\n"
-"Betriebssysteme auf dem selben\n"
-"Rechner.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Größe: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s Zylinder, %s KĂśpfe, %s Sektoren\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM Platten %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabellen Typ: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "auf Bus %d ID %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Optionen: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Dateisystem-SchlĂźssel"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Wählen Sie Ihren Dateisystem-Schlßssel (Passwort)"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Die PasswĂśrter stimmen nicht Ăźberein"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "SchlĂźssel"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "SchlĂźssel (erneut)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Typ ändern"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Bitte wählen Sie ein Medium"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Server suchen"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatieren von %s schlug Fehl"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr ""
-"Ich bin nicht in der Lage, %s mit einem Dateisystem vom Typ %s zu "
-"formatieren."
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "Das Einhängen der Partition %s in das Verzeichnis %s schlug fehl."
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-"Der Dateisystemcheck (fsck) schlug fehl mit dem RĂźckgabewert %d oder Signal %"
-"d."
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Fehler beim Aushängen von %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "Einfach"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "mit „/usr“"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"Sie kĂśnnen JFS nicht fĂźr Partitionen verwenden, die kleiner als 16MB sind!"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Sie kĂśnnen ReiserFS nicht fĂźr Partitionen verwenden, die kleiner als 32MB "
-"sind!"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Einhängpunkte mßssen mit einem / beginnen."
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Es gibt bereits eine Partition, mit dem Einhängpunkt %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Sie kÜnnen kein logisches LVM Medium fßr den Einhängpunkt %s verwenden."
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Dieses Verzeichnis muss in der Verzeichnisbaumwurzel bleiben"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Sie benĂśtigen ein echtes GNU/Linux Dateisystem (Ext2, ReiserFS) fĂźr \n"
-"diesen Einhängpunkt.\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Sie kÜnnen kein verschlßsseltes Medium fßr den Einhängpunkt %s verwenden."
-
-# ../../diskdrak1
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nicht genug freier Platz, damit ich selbst Partition anlegen kann."
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nichts zu tun."
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Fehler beim Öffnen von %s zum Schreiben: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ein Fehler ist aufgetreten - es wurden keine gßltigen Geräte gefunden, auf "
-"denen neue Dateisysteme erstellt werden kĂśnnen. Bitte ĂźberprĂźfen Sie Ihre "
-"Hardware(-Konfiguration) auf mĂśgliche Fehler und falsche Einstellungen."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Sie haben keine Partitionen!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
-"Benutzerkennzeichen hat eigene Präferenzen (Grafische Umgebung,\n"
-"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
-"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
-"kĂśnnen Sie im Benutzerhandbuch nachsehen. Sie kĂśnnen mehrere normale\n"
-"Benutzerkonten einrichten, im Gegensatz zum „privilegierten“ Kennzeichen:\n"
-"ÂťrootÂŤ, das einmalig ist. Im Gegensatz zu ÂťrootÂŤ kĂśnnen diese normalen\n"
-"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen verändern. Sie\n"
-"kĂśnnen sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
-"Zugang zu Ihrem GNU/Linux-System gewähren wollen. Erstellen Sie sich ein\n"
-"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
-"diesen Rechner nutzt. Sie sollten nicht ständig mit dem privilegierten\n"
-"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
-"schweren Fehler als einfacher Benutzer machen, dann kĂśnnen Sie maximal\n"
-"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
-"\n"
-"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
-"notwendigerweise Ihr richtiger Name sein. „DrakX“ wird das erste Wort, das\n"
-"Sie eingegeben haben, in das Feld „Benutzerkennzeichen“ eintragen. Dies ist\n"
-"der Name, den Sie zum Anmelden fĂźr dieses Kennzeichen benĂśtigen. NatĂźrlich\n"
-"kÜnnen Sie ihn hier nach Belieben verändern. Dann geben Sie Ihrem Konto ein\n"
-"Passwort. FĂźr ein Benutzerkennzeichen ist dieses zwar nicht von so\n"
-"herausragender Bedeutung wie das fĂźr ÂťrootÂŤ, doch Sie sollten trotzdem\n"
-"etwas Sorgfalt walten lassen. Immerhin sind es Ihre Daten...\n"
-"\n"
-"Klicken Sie auf „Benutzer akzeptieren“, um das Kennzeichen zu erstellen.\n"
-"Anschließend können Sie direkt weitere Benutzer hinzufügen. Wenn Sie allen\n"
-"Kennzeichen erstellt haben, klicken Sie auf „Fertig“.\n"
-"\n"
-"Durch Anwahl der Schaltfläche „Fortgeschritten“ haben Sie auch die\n"
-"MÜglichkeit, die Standard-Shell dieses Benutzers ändern (normalerweise ist\n"
-"dies die „Bash“)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Oben sehen Sie die auf Ihrer Festplatte gefundenen Linux-Partitionen. Als\n"
-"normaler Linuxanwender kÜnnen Sie problemlos die Vorschläge des Assistenten\n"
-"ßbernehmen. Sollten Sie diesen Vorschlag ändern, mßssen Sie zumindest eine\n"
-"Partition als Verzeichnisbaumwurzel („/“) definieren. Wählen Sie keine zu\n"
-"kleine Partition, da sie sonst nicht genug Software installieren kĂśnnen.\n"
-"Falls Sie Ihre persĂśnlichen Daten auf einer getrennten Partition speichern\n"
-"mĂśchten, mĂźssen Sie eine Linux-Partition fĂźr ihre persĂśnlichen\n"
-"Verzeichnisse („/home“) definieren (Dies geht natürlich nur, wenn Sie mehr\n"
-"als nur eine Linux Partition haben).\n"
-"\n"
-"Alle Partitionen werden folgendermaßen aufgeführt: „Name“, „Kapazität“\n"
-"\n"
-"„Name“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“ und\n"
-"„Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
-"„sd“ wenn es eine SCSI Platte ist.\n"
-"\n"
-"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
-"Platten bedeutet:\n"
-"\n"
-" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
-"Festplatte am Bus“, etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Da die Mandrake Linux-Distribution stetig wächst, wurde sie in mehrere\n"
-"CD-ROMs unterteilt. Es kann daher vorkommen, dass „DrakX“ Pakete von\n"
-"anderen, als der Installations-CD-ROM installieren will. In diesem Fall\n"
-"wird es die aktuelle CD-ROM auswerfen und nach einer anderen fragen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
-"installieren wollen. Es gibt tausende von Paketen fĂźr Mandrake Linux, und\n"
-"Sie mĂźssen sie nicht alle auswendig kennen.\n"
-"\n"
-"Wenn Sie eine klassische CD-ROM-Installation vornehmen, werden Sie zuerst\n"
-"nach den Ihnen zur VerfĂźgung stehenden CDs gefragt (nur im Expertenmodus).\n"
-"Markieren Sie die Zeilen anhand der CDs die Sie vorliegen haben und klicken\n"
-"Sie auf die Schaltfläche „OK“.\n"
-"\n"
-"Die Pakete sind nach ihrer Verwendung in Gruppen eingeteilt. Diese Gruppen\n"
-"wiederum enthalten vier Abschnitte:\n"
-"\n"
-" * „Arbeitsplatzrechner“: Falls Ihr Rechner als Arbeitsplatzrechner\n"
-"verwendet werden soll, markieren Sie eine oder mehrere Gruppen.\n"
-"\n"
-" * „Entwicklungsplattform“: Falls Sie mit Ihrem Rechner programmieren\n"
-"wollen, sollten Sie diese Gruppe markieren.\n"
-"\n"
-" * „Server“: Wenn Ihre Maschine ein Server werden soll, können Sie hier die\n"
-"wichtigsten Dienste auswählen, die auf Ihren Rechner installiert werden\n"
-"sollen.\n"
-"\n"
-" * „Grafische Oberfläche“: Wählen Sie hier Ihre bevorzugte grafische\n"
-"Arbeitsoberfläche. Wenn Sie eine grafische Oberfläche verwenden wollen, so\n"
-"mßssen Sie hier zumindest eine Gruppe auswählen.\n"
-"\n"
-"Wenn Sie die Maus Ăźber eine Gruppe bewegen, erhalten Sie einen kurzen\n"
-"erklärenden Text ßber die Gruppe. Falls Sie bei einer Installation alle\n"
-"Markierungen entfernen, erscheint ein Dialog, in dem Sie zwischen\n"
-"verschiedenen Minimalinstallationen wählen kÜnnen.\n"
-"\n"
-" * „Mit X“ Installiert eine rudimentäre grafische Oberfläche;\n"
-"\n"
-" * „Mit minimaler Dokumentation“ Installiert das Basissystem zuzüglich\n"
-"grundlegender Werkzeuge inklusive deren Dokumentation. Dies ist die\n"
-"sinnvollste Wahl fĂźr eine Serverinstallation.\n"
-"\n"
-" * „Extrem minimale Installation“ Sie erhalten eine komplett „nackte“\n"
-"Linux-Distribution (speziell auch ohne urpmi!). Es versteht sich von\n"
-"selbst, dass das nur eine Kommandozeileninstallation sein kann.\n"
-"\n"
-"Wenn Sie die Schaltfläche „Fortgeschritten“ anwählen, erhalten Sie die\n"
-"Möglichkeit, eine „Individuelle Paketauswahl“ durchzuführen. Das macht nur\n"
-"Sinn, wenn Sie die Pakete genau kennen oder wenn Sie volle Kontrolle\n"
-"darĂźber haben wollen, was installiert werden soll.\n"
-"\n"
-"Haben Sie die Installation als „Aktualisierung“ gestartet, können Sie die\n"
-"Markierungen aller Gruppen entfernen, um die Installation neuer Pakete zu\n"
-"vermeiden. Hierdurch werden nur bereits installierte Pakete aktualisiert\n"
-"oder repariert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Schlussendlich erhalten Sie (falls Sie sich für „Individuelle Paketauswahl“\n"
-"entschieden haben) eine Baumliste aller Pakete die zu den von Ihnen\n"
-"gewĂźnschten Gruppen gehĂśren. Diese Pakete sind nach Gruppen und\n"
-"Untergruppen klassifiziert. Beim DurchstĂśbern des Baums, kĂśnnen Sie\n"
-"Gruppen, Untergruppen oder einzelne Pakete markieren oder deren Markierung\n"
-"entfernen.\n"
-"\n"
-"Sobald Sie ein Paket auswählen, erscheint rechts eine kurze Beschreibung.\n"
-"Sobald Sie die Auswahl abgeschlossen haben, bestätigen Sie das durch\n"
-"Drücken der Schaltfläche „Installation“. Nun beginnt die eigentliche\n"
-"Installation. Falls Sie eine Vielzahl von Paketen installieren wollen,\n"
-"kĂśnnen Sie nun getrost einen Kaffee trinken gehen.\n"
-"\n"
-"!! Es kommt vor, dass Server- und Dienst-Pakete angewählt wurden - entweder\n"
-"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
-"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
-"Unter Mandrake Linux werden installierte Server und Dienste automatisch\n"
-"beim Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
-"Distribution zusammengestellt wurde, keine SicherheitslĂźcken oder Fehler in\n"
-"diesen Paketen bekannt waren, ist natürlich nicht auszuschließen, dass\n"
-"später solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
-"hier die Rede ist, wählen Sie sicherheitshalber lieber „Nein“. Falls Sie\n"
-"mit „Ja“ antworten, werden die Dienste und Server installiert und stehen\n"
-"Ihnen nach der Installation standardmäßig zur Verfügung. !!\n"
-"\n"
-"Die Option „Automatische Abhängigkeiten“ unterdrückt nur die Warnungen, die\n"
-"erscheinen, wenn das Installationsprogramm Pakete automatisch markiert, um\n"
-"Paketabhängigkeiten aufzulÜsen, wenn Sie ein Paket auswählen.\n"
-"\n"
-"Das kleine Diskettensymbol am unteren Rand der Liste ermĂśglicht es Ihnen,\n"
-"die während einer vorangegangenen Installation gespeicherte Paketauswahl\n"
-"erneut zu verwenden. Durch Betätigen der Schaltfläche Üffnen Sie einen\n"
-"Dialog, der Sie auffordert, die Diskette einzulegen, die die Auswahl der\n"
-"frßheren Installation enthält. Um zu erfahren, wie Sie diese Diskette\n"
-"erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
-"Installationsschrittes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Wenn Sie Ihren Computer mit dem Internet oder mit einem lokalen Netzwerk\n"
-"verbinden wollen, dann wählen Sie bitte die entsprechende Option aus. Bitte\n"
-"schalten Sie jedoch zuvor, falls nÜtig, die dafßr benÜtigten Geräte ein,\n"
-"damit „DrakX“ sie automatisch erkennen kann.\n"
-"\n"
-"Mandrake Linux bietet Ihnen die MĂśglichkeit, Ihre Internet-Verbindung\n"
-"bereits während der Installation zu konfigurieren. Zur Auswahl stehen\n"
-"folgende Verbindungsarten: HerkĂśmmliches Modem, ISDN Modem, ADSL\n"
-"Verbindung, Kabelmodem oder eine einfache LAN Verbindung (Ethernet).\n"
-"\n"
-"Wir wollen hier nicht weiter ins Detail gehen, nur soviel: Stellen Sie\n"
-"sicher, dass sie die nĂśtigen Parameter von Ihrem Internet Provider oder\n"
-"Systemadministrator erhalten haben.\n"
-"\n"
-"Weitere Einzelheiten, die hier bereits hilfreich sein kĂśnnen, erhalten Sie\n"
-"im Kapitel DrakNet. Falls Sie unsicher sind, warten Sie ab, bis die\n"
-"Installation beendet ist und verwenden Sie danach das beschriebene\n"
-"Programm, um Ihre Verbindung einzurichten.\n"
-"\n"
-"Wenn Sie Ihr Netzwerk erst nach Abschluss der Installation einrichten\n"
-"wollen oder sobald Sie die Konfiguration beendet haben, klicken Sie auf\n"
-"„Abbrechen“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Als nächstes kÜnnen Sie die Dienste auswählen, die während des\n"
-"Betriebssystemstarts aktiviert werden sollen.\n"
-"\n"
-"Hier werden alle Dienste, die nach der aktuellen Installation zum BS-Start\n"
-"zur Verfßgung stehen, angezeigt. Lesen Sie diese Liste sorgfältig durch und\n"
-"markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur VerfĂźgung\n"
-"haben wollen.\n"
-"\n"
-"Wenn Sie einen Dienst anwählen, erhalten Sie eine kurze Erklärung dazu.\n"
-"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
-"nicht, verändern Sie am Besten die voreingestellten Markierungen nicht.\n"
-"\n"
-"!! Sollten Sie Ihren Rechner als Server verwenden wollen, so mĂźssen Sie an\n"
-"dieser Stelle besonders vorsichtig sein: wählen Sie alle Dienste ab, die\n"
-"Sie nicht benĂśtigen. Denken Sie daran, dass etliche Dienste eine\n"
-"potentielle Einbruchstelle in das System von außen darstellen, wenn diese\n"
-"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
-"wirklich brauchen! !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und Ăźbersetzt diese anhand\n"
-"der Zeitzone in Ihre lokale Zeit.\n"
-"\n"
-"Da MicrosoftWindows(TM) nicht sinnvoll mit GMT umgehen kann, mĂźssen Sie\n"
-"„Nein“ wählen, falls Sie auch ein Betriebssystem aus dem Hause Microsoft\n"
-"auf Ihrem Rechner „beherbergen“\n"
-"\n"
-"Die Verwendung der Option „Automatische Zeit-Synchronisation“ reguliert\n"
-"Ihre Uhr, indem sie Verbindung mit einem Zeitserver im Internet aufnimmt.\n"
-"Wählen Sie aus der Liste einen Server in Ihrer Nähe. Damit die funktioniert\n"
-"benÜtigen Sie eine ständige Internetverbindung."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (das X Window System) ist das Herz der grafischen Benutzeroberfläche von\n"
-"GNU/Linux. Es bildet die Grundlage fĂźr die Vielzahl grafischer\n"
-"Benutzerumgebungen, die Mandrake Linux Ihnen anbietet (wie etwa KDE, GNOME,\n"
-"AfterStep oder WindowMaker). Auch hier wird „DrakX“ die Konfiguration\n"
-"soweit wie mÜglich selbstständig vollziehen.\n"
-"\n"
-"Sollten Sie nicht gerade sehr alte, sehr neue oder exotische Grafikhardware\n"
-"einsetzen, wird „DrakX“ die Konfiguration erfolgreich durchführen und\n"
-"anschließend die grafische Oberfläche mit der bestmöglichen Auflösung\n"
-"starten! Es erscheint ein Testfenster und Sie werden anschließend gefragt,\n"
-"ob die Anzeige einwandfrei war.\n"
-"\n"
-"Falls Sie eine „Experte“n-Installation vornehmen, werden Sie in den\n"
-"folgenden Schritten von dem „DrakX“-Konfigurationsassistenten begleitet.\n"
-"\n"
-"Falls das Bild korrekt dargestellt wird, wählen Sie bitte die Schaltfläche\n"
-"„Ja“ an, „DrakX“ wird dann mit dem nächsten Schritt der Installation\n"
-"fortfahren. Sollte der Schirm aus irgendwelchen GrĂźnden nicht lesbar sein,\n"
-"müssen Sie nur 10 Sekunden warten. Anschließend sollte wieder das\n"
-"KonfigurationsmenĂź erscheinen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Es kann Ihnen passieren, dass der erste Versuch noch nicht korrekt ist (Der\n"
-"Schirm ist zu klein, liegt zu weit rechts oder links...). Daher werden Sie\n"
-"selbst dann mit der Frage konfrontiert, wenn der „DrakX“-Server sich\n"
-"starten lies, „DrakX“ also davon ausgehen könnte, dass alles in Ordnung\n"
-"ist. Sie erhalten daher eine Liste von gĂźltigen Modi, aus denen Sie\n"
-"versuchen sollten den besten auszuwählen.\n"
-"\n"
-"Sollten alle stricke reißen, und „DrakX“ immer noch nicht laufen, wählen\n"
-"Sie einfach im Untermenü „Grafikkarte ändern“, den Punkt „Nicht\n"
-"aufgeführt“. Wenn Sie dann nach dem Server gefragt werden, wählen Sie den\n"
-"„FBDev“: Diese Variante sollte mit allen modernen Grafikkarten\n"
-"funktionieren. Ein „Nochmals testen“ sollte Gewissheit bringen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Letztlich werden Sie gefragt, ob sie direkt in die grafische Oberfläche\n"
-"starten wollen. Diese Frage wird auch erscheinen, wenn Sie das Testen der\n"
-"Konfiguration Ăźbersprungen haben. Schlug die Konfiguration der grafischen\n"
-"Umgebung fehl oder wollen Sie den Rechner als Server laufen lassen, geben\n"
-"Sie natürlich „Nein“ an."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Die Mandrake LinuxCD-ROM hat einen eingebauten Rettungsmodus. Sie erreichen\n"
-"ihn durch Starten von CD-ROM, und DrĂźcken von ÂťF1ÂŤ bei Bootbeginn. Geben\n"
-"Sie dann ÂťrescueÂŤ an der Eingabeaufforderung ein. Falls Ihr Rechner nicht\n"
-"von CD-ROM starten kann, sollten Sie diesen Punkt unbedingt aus zwei\n"
-"GrĂźnden abarbeiten:\n"
-"\n"
-" * Wenn „DrakX“ den Betriebssystemstarter installiert, schreibt es den\n"
-"Boot-Sektor (MBR) Ihrer primären Festplatte neu (außer Sie wollen einen\n"
-"anderen Betriebssystemstarter verwenden), damit Sie die verschiedenen,\n"
-"vorhandenen Betriebssysteme starten kĂśnnen (etwa Windows und GNU/Linux).\n"
-"Sollten Sie etwa Windows neu installieren, wird dieses - ohne Sie zu fragen\n"
-"- Ihren Boot-Sektor Ăźberschreiben. Somit werden Sie Ihr GNU/Linux nicht\n"
-"mehr starten kĂśnnen! Mit einer Startdiskette kĂśnnen Sie Ihr\n"
-"GNU/Linux-System dann trotzdem hochfahren und diese Änderungen rückgängig\n"
-"machen.\n"
-"\n"
-" * Sollten Ihnen andere schwerwiegende Systemfehler das Starten von\n"
-"GNU/Linux von der Festplatte unmĂśglich machen, ist diese Startdiskette so\n"
-"ziemlich die einzige MÜglichkeit, auf Ihr System zuzugreifen. Zudem enthält\n"
-"sie eine Anzahl von Systemprogrammen, die Ihnen bei der Behebung von\n"
-"Systemfehlern (nach einem Stromausfall, einen unglĂźcklichen Tippfehler in\n"
-"einem Passwort, etc.) helfen werden.\n"
-"\n"
-"Wenn Sie diesen Schritt anwählen, wird „DrakX“ Sie bitten, eine Diskette in\n"
-"ein Laufwerk zu legen. Die Diskette sollte natĂźrlich leer sein (zumindest\n"
-"keine relevanten Daten enthalten). Sie muss nicht formatiert sein, „DrakX“\n"
-"kĂźmmert sich um alles."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Sie mĂźssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandrake Linux\n"
-"System installiert werden soll. Sofern alles leer ist bzw. ein\n"
-"Betriebssystem alles belegt, mĂźssen die Platte(n) neu partitioniert werden.\n"
-"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
-"Plattenplatz so aufzuteilen, dass Ihr Mandrake Linux darauf installiert\n"
-"werden kann.\n"
-"\n"
-"Da dieser Schritt normalerweise irreversibel ist, kann das Partitionieren\n"
-"fĂźr unerfahrene Anwender unangenehm und stressig sein. Dieser Assistent\n"
-"kann Ihnen diesen Schritt abnehmen. Lesen Sie dennoch vor Beginn im\n"
-"Handbuch die entsprechenden Passagen und lassen Sie sich Zeit mit der\n"
-"Entscheidung.\n"
-"\n"
-"Wenn Sie die Installation im Expertenmodus durchfĂźhren, werden Sie nun das\n"
-"Mandrake Linux Partitionier-Werkzeug kennen lernen: „DiskDrake“. Es erlaubt\n"
-"Ihnen Ihre Partitionen genau auf Ihre BedĂźrfnisse abzustimmen. Falls Sie\n"
-"keine Ahnung haben, wie Sie die Festplatte partitionieren sollen, wählen\n"
-"Sie die Schaltfläche „Assistent“ und überlassen diesem damit die gesamte\n"
-"Arbeit.\n"
-"\n"
-"Sollten Sie bereits Partitionen haben (etwa von einer alten GNU/Linux\n"
-"Installation oder solche, die mit einem anderen Partitionierungswerkzeug\n"
-"erstellt wurden), die Sie fĂźr die Installation von Mandrake Linux verwenden\n"
-"wollen, wählen Sie diese hier einfach aus.\n"
-"\n"
-"Falls noch keine Partitionen existieren, mĂźssen Sie sie erstellen.\n"
-"Verwenden Sie dafßr obigen Assistenten. Abhängig vom aktuellen Zustand\n"
-"Ihrer Platte(n) haben Sie verschiedene Alternativen:\n"
-"\n"
-" * „Freien Platz verwenden“: Dies führt einfach dazu, dass Ihre leere(n)\n"
-"Festplatte(n) automatisch partitioniert werden; Sie mĂźssen sich also um\n"
-"nichts weiter kĂźmmern.(*)\n"
-"\n"
-" * „Verwende existierende“: Der Assistent hat eine oder mehrere "
-"existierende\n"
-"Linux Partitionen auf Ihrer Platte gefunden. Wählen Sie diese Schaltfläche,\n"
-"falls Sie sie behalten wollen.\n"
-"\n"
-" * „Komplette Platte löschen“: Falls Sie alle Daten Ihrer Platte verlieren,\n"
-"und sie durch Ihr neues Mandrake Linux System ersetzen wollen, wählen Sie\n"
-"diese Schaltfläche. Beachten Sie, dass dieser Schritt nicht rßckgängig\n"
-"gemacht werden kann.\n"
-"\n"
-" * „Freien Platz der Windows Partition verwenden“: Falls der gesamte\n"
-"Plattenplatz aktuell fĂźr MicrosoftWindows(TM) verschwendet ist, mĂźssen Sie\n"
-"fĂźr Linux Platz schaffen. Um dies zu erreichen, kĂśnnen Sie entweder Ihre\n"
-"MicrosoftWindows(TM) Partition(en) samt Daten löschen (siehe „Komplette\n"
-"Platte löschen“ oder „Experten-Modus“) oder Ihre Windows Partition\n"
-"verkleinern. Letzteres geht ohne Datenverlust. Sie sollten diese Variante\n"
-"wählen, falls Sie beide Betriebssysteme (Windows und Mandrake Linux)\n"
-"nebeneinander nutzen wollen.\n"
-"\n"
-" Bevor Sie sich fĂźr diese Variante entscheiden, sei hier noch einmal "
-"betont,\n"
-"dass das bedeutet, Sie haben weniger Platz fĂźr Windows als momentan.\n"
-"\n"
-" * „Windows(TM) löschen“: Bei dieser Variante werden alle Windows\n"
-"Partitionen gelĂśscht und die Platte(n) komplett neu partitioniert.\n"
-"\n"
-" !! Alle Daten auf den Platten gehen dadurch verloren! !!\n"
-"\n"
-" * „Expertenmodus“: Wenn Sie Ihre Festplatte selber von Hand partitionieren\n"
-"wollen, dann kÜnnen Sie diese Option wählen. Seien Sie bitte sehr\n"
-"sorgfältig, wenn Sie diese LÜsung wählen, da Sie zwar alle mÜglichen\n"
-"Einstellungen vornehmen, aber gleichzeitig auch sehr leicht Daten verlieren\n"
-"kĂśnnen. Diese Option ist nur geeignet, wenn Sie wissen, was Sie tun.\n"
-"\n"
-"(*) In Deutschland ist es quasi unmĂśglich, Komplettrechner mit leeren\n"
-"Festplatten zu erhalten, da laut Gesetz nur Rechner mit BS verkauft werden\n"
-"dĂźrfen. Diese Regelung stammt noch aus der Zeit, als Politiker nur\n"
-"proprietäre kommerzielle BSe kannten und sich nicht vorstellen konnten,\n"
-"dass es freie und sogar kostenlose Alternativen gibt. Jeder Käufer eines\n"
-"Komplettrechners ohne BS wurde quasi mit einem Raubkopierer von Produkten\n"
-"aus Redmond gleichgesetzt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
-"Betriebssystem sollte einsatzbereit sein. Bei einem Neustart kĂśnnen Sie\n"
-"zwischen den auf Ihrer Platte installierten Betriebssystemen auswählen.\n"
-"Klicken Sie nur noch auf „OK“ und das System wird neu gestartet.\n"
-"\n"
-"Die Schaltfläche „Fortgeschritten“ liefert zwei weitere Schaltflächen:\n"
-"\n"
-" * „Erstellen einer Auto-Installationsdiskette“: Hiermit können Sie eine\n"
-"Installationsdiskette erstellen, mit deren Hilfe Sie eine identische\n"
-"automatische Installation ohne Interaktion eines Administrators\n"
-"durchzufĂźhren kĂśnnen.\n"
-"\n"
-" Es gibt zwei verschiedene Alternativen, nachdem Sie diese Schaltfläche\n"
-"aktiviert haben:\n"
-"\n"
-" * „Erneut abspielen“: Diese Installation ist nur teilweise automatisch, "
-"da\n"
-"der Partitionierungsschritt (aber nur dieser!) immer noch interaktiv\n"
-"vonstatten geht.\n"
-"\n"
-" * „Automatisiert“: Vollautomatische Installation: Die Festplatte wird\n"
-"vollständig reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
-"\n"
-" Diese Funktion ist besonders nĂźtzlich, wenn man eine Menge von "
-"identischer\n"
-"Rechner einrichten will. Weitere Informationen erhalten Sie auch auf der\n"
-"Seite Auto install\n"
-"\n"
-" * „Paketauswahl speichern“: (*) Sie speichern damit die Paketauswahl, die\n"
-"Sie vorher getroffen haben. Wenn Sie später eine erneute Installation\n"
-"vornehmen wollen, legen Sie einfach die Diskette ins Laufwerk und starten\n"
-"Sie die Installation mittels [F1] an der ersten Eingabeaufforderung. Geben\n"
-"Sie dann Âťlinux defcfg=\"floppy\"ÂŤ ein.\n"
-"\n"
-"(*) Sie benötigen eine FAT formatierte Diskette (Mittels „mformat a:“\n"
-"kĂśnnen Sie unter GNU/Linux eine solche erstellen)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Alle neu angelegten Partitionen mĂźssen formatiert (= ein Dateisystem darauf\n"
-"erzeugt) werden, bevor Sie sie verwenden kĂśnnen.\n"
-"\n"
-"MĂśglicherweise wollen Sie auch einige bereits existierende Partitionen\n"
-"formatieren, um alle darauf vorhandenen Daten zu lĂśschen. Falls ja,\n"
-"markieren Sie diese ebenfalls.\n"
-"\n"
-"Es sei angemerkt, dass bereits existierende Partitionen nicht erneut\n"
-"formatiert werden mĂźssen. Sie sollten Partitionen, die Teile des\n"
-"Betriebssystems enthalten neu formatieren (etwa „/“, „/usr“ oder „/var“),\n"
-"Partitionen mit Ihren privaten Daten (normalerweise „/home“) sollten Sie\n"
-"jedoch nicht neu formatieren.\n"
-"\n"
-"Seien Sie in diesem Schritt sehr sorgfältig. Nach dem Formatieren einer\n"
-"Partition ist der komplette Inhalt unwiederbringlich gelĂśscht!\n"
-"\n"
-"Wählen Sie „OK“, sobald Sie bereit sind die Partitionen zu formatieren.\n"
-"\n"
-"Wählen Sie „Abbruch“, falls Sie andere Partitionen verwenden wollen, um Ihr\n"
-"Mandrake Linux darauf zu installieren.\n"
-"\n"
-"Wählen Sie „Fortgeschritten“, um die Möglichkeit zu erhalten, Partitionen\n"
-"anzugeben, die auf defekte BlĂścke untersucht werden sollen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Ihre neue Mandrake Linux Distribution wird nun installiert. Das dauert\n"
-"einige Minuten (abhängig von der Anzahl zu installierender Pakete und der\n"
-"Geschwindigkeit Ihres Rechners).\n"
-"\n"
-"Bitte haben Sie etwas Geduld."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Es ist sehr wahrscheinlich, dass zum Zeitpunkt Ihrer Mandrake Linux\n"
-"Installation bereits einige Pakete aktualisiert wurden, etwa da noch Fehler\n"
-"entdeckt und beseitigt wurden oder da in Paketen SicherheitslĂźcken entdeckt\n"
-"wurden, fĂźr die bereits LĂśsungen existieren. Um von diesen aktualisierten\n"
-"Paketen Gebrauch zu machen, wird Ihnen nun angeboten, diese aus dem\n"
-"Internet nachzuladen. Betätigen Sie die Schaltfläche „Ja“, wenn Sie einen\n"
-"Internetzugang haben, um die Pakete zu installieren, andernfalls betätigen\n"
-"Sie die Schaltfläche „Nein“. Sie können diese Pakete natürlich auch\n"
-"jederzeit nach der Installation noch installieren.\n"
-"\n"
-"Betätigen der Schaltfläche „Ja“ zeigt Ihnen eine Liste von Servern, von\n"
-"denen Sie die Aktualisierungen herunterladen kÜnnen. Wählen Sie einen in\n"
-"Ihrer Nähe. Sie erhalten dann einen Paketauswahldialog: Kontrollieren Sie\n"
-"die Auswahl und bestätigen Sie diese durch Betätigen von „Installieren“.\n"
-"Die Pakete werden nun angefordert und installiert. Sollten Sie das nicht\n"
-"wünschen, betätigen Sie einfach die Schaltfläche „Abbruch“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Lesen Sie bitte aufmerksam die die Lizenz, bevor Sie fortfahren. Sie\n"
-"umfasst die gesamte Mandrake Linux Distribution. Sollten Sie nicht in allen\n"
-"Punkten zustimmen, betätigen Sie bitte die Schaltfläche „Zurückweisen“, um\n"
-"die Installation abzubrechen. Um mit der Installation fortzufahren\n"
-"betätigen Sie die Schaltfläche „Akzeptieren“."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Nun ist es an der Zeit, die gewĂźnschte Sicherheitsebene fĂźr Ihr System\n"
-"festzulegen. Als Faustregel sollte hier dienen: Je zugänglicher die\n"
-"Maschine ist und je kritischer die auf ihr gesicherten Daten sind, desto\n"
-"hĂśher sollte die Sicherheitsebene sein. Andererseits geht die gewonnene\n"
-"Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit, mit der\n"
-"gewisse Befehle/Abläufe durchgefßhrt werden kÜnnen. Ausfßhrlichere\n"
-"Erläuterungen zu den verschiedenen Sicherheitsebenen erhalten Sie im\n"
-"Kapitel MSEC des Referenzhandbuchs.\n"
-"\n"
-"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
-"Standardeinstellung bei."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Sie mĂźssen nun entscheiden auf welche Partition(en) Ihr neues Mandrake\n"
-"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
-"(etwa von einer frĂźheren Installation von GNU/Linux oder durch das Erzeugen\n"
-"mit einem anderen Partitionierungswerkzeug), kĂśnnen Sie diese verwenden.\n"
-"Anderenfalls mĂźssen Sie Partitionen definieren.\n"
-"\n"
-"Um Partitionen zu erzeugen mßssen Sie erst eine Festplatte wählen. Sie\n"
-"können die Platte wählen in dem Sie „hda“ für die erste IDE-Platte wählen,\n"
-"„sda“ für die erste SCSI-Platte, usw.\n"
-"\n"
-"Um die gewählte Platte zu partitionieren stehen folgende MÜglichkeiten zur\n"
-"VerfĂźgung:\n"
-"\n"
-" * „Alles löschen“: Betätigen dieser Schaltfläche löscht alle Partitionen\n"
-"auf der markierten Festplatte.\n"
-"\n"
-" * „Automatisches Erstellen“: Diese Schaltfläche erstellt automatisch Ext2-\n"
-"und Swap-Partitionen im ungenutzten Bereich Ihrer Festplatte.\n"
-"\n"
-" * „Partitionstabelle retten“: Falls Ihre Partitionstabelle defekt ist,\n"
-"kÜnnen Sie durch Drßcken dieser Schaltfläche versuchen Sie wieder\n"
-"herzustellen. Seien Sie vorsichtig und denken Sie immer daran, dass dieser\n"
-"Versuch misslingen kann.\n"
-"\n"
-" * „Rückgängig“: Mit dieser Schaltfläche können Sie alle Einstellungen\n"
-"rßckgängig machen.\n"
-"\n"
-" * „Neu laden“: Sie können durch Betätigen dieser Schaltfläche alle\n"
-"Einstellungen rßckgängig machen und die (noch bestehende) Partitionstabelle\n"
-"neu laden.\n"
-"\n"
-" * „Assistent“: Falls Sie keine Ahnung haben wie Sie die Festplatte\n"
-"partitionieren sollen, wählen Sie diese Schaltfläche. Sie ßberlassen damit\n"
-"die gesamte Arbeit unserem Assistenten, der mittels „Abra Kadabra“(TM) Ihre\n"
-"Platte partitioniert.\n"
-"\n"
-" * „Von Diskette wiederherstellen“: Falls Sie Ihre Partitionstabelle vor\n"
-"Beginn auf eine Diskette gespeichert haben, kĂśnnen Sie sie mittels dieser\n"
-"Schaltfläche wieder zurßckschreiben.\n"
-"\n"
-" * „Auf Diskette speichern“: Falls Sie Ihre aktuelle Partitionstabelle auf\n"
-"Diskette speichern wollen, falls Sie sie später wiederherstellen wollen,\n"
-"kÜnnen Sie das mit Hilfe dieser Schaltfläche tun.\n"
-"\n"
-" * „Fertig“: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
-"aktivieren Sie diese Schaltfläche, um Ihre Änderungen zu speichern.\n"
-"\n"
-"Information: Sie kĂśnnen alle Einstellungen per Tastatur vornehmen. Sie\n"
-"kĂśnnen sich mittels [Tab] und den Pfeiltasten bewegen.\n"
-"\n"
-"Wenn eine Partition ausgewählt ist, kÜnnen Sie mittels:\n"
-"\n"
-" * [Strg]-[C] - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
-"Partition sind)\n"
-"\n"
-" * [Strg]-[D] - die Partition lĂśschen\n"
-"\n"
-" * [Strg]-[M] - dem Einhängpunkt festlegen\n"
-"\n"
-"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
-"eine mindestens 1 MB große HFS Start-Partition für den\n"
-"Betriebssystemstarter „Yaboot“ erstellen. Wenn Sie diese Partition etwas\n"
-"größer dimensionieren, etwa 50 MB, haben Sie einen geeigneten Platz, um\n"
-"einen Rettungskern samt RamDisk abzulegen, um in Notfällen starten zu\n"
-"kĂśnnen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Es wurde mehr als nur eine MicrosoftWindows(TM) Partition auf Ihrer Platte\n"
-"gefunden. Bitte wählen Sie welche Sie verkleinern wollen, um Ihr neues\n"
-"Betriebssystem Mandrake Linux installieren zu kĂśnnen.\n"
-"\n"
-"Zu Ihrer Information sind alle Partitionen folgendermaßen aufgeführt:\n"
-"„Linuxname“, „Windowsname“, „Kapazität“.\n"
-"\n"
-"„Linuxname“ ist zusammengesetzt aus: „Festplattentyp“, „Festplattennummer“\n"
-"und „Partitionsnummer“ (etwa, „hda1“ oder „sdb4“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“ falls es sich um einen IDE Platte handelt und\n"
-"„sd“ wenn es eine SCSI Platte ist.\n"
-"\n"
-"„Festplattennummer“ ist der Buchstabe hinter „hd“ oder „sd“. Bei IDE\n"
-"Platten bedeutet:\n"
-"\n"
-" * „a“ - „Master Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „b“ - „Slave Festplatte am primären IDE Kontroller“,\n"
-"\n"
-" * „c“ - „Master Festplatte am sekundären IDE Kontroller“,\n"
-"\n"
-" * „d“ - „Slave Festplatte am sekundären IDE Kontroller“.\n"
-"\n"
-"Bei SCSI Platten steht „a“ für „erste Festplatte am Bus“, „b“ für „zweite\n"
-"Festplatte am Bus“, etc.\n"
-"\n"
-"„Windowsname“ ist der Laufwerksbuchstabe, wie er von Windows vergeben wird\n"
-"(die erste FAT Partition der ersten Platte heißt „C:“)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Bitte gedulden Sie sich etwas. Es kann einige Minuten dauern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"„DrakX“ fragt Sie nun nach der gewünschten Installationsart. Sie haben die\n"
-"Wahl zwischen einer Standardinstallation („Empfehlenswert“) und einer\n"
-"Variante, in der Sie mehr Einfluss ausüben können („Experte“). Sie müssen\n"
-"sich nun auch entscheiden, ob Sie eine Installation oder eine\n"
-"Aktualisierung einer bereits vorhandenen Mandrake Linux-Version vornehmen\n"
-"wollen. Es ist mĂśglich, die Installation Ăźber ein existierendes BS zu\n"
-"installieren und dieses damit zu entfernen. Sie kĂśnnen auch eine\n"
-"Aktualisierung vornehmen, um eine existierende Installation zu reparieren.\n"
-"Wählen Sie:\n"
-"\n"
-" * „Installieren“: Entfernt komplett ältere Versionen von Mandrake Linux,\n"
-"die noch installiert sind um genau zu sein kĂśnnen Sie je nach aktuellem\n"
-"Inhalt Ihrer Platte auch einige ältere Linux- oder anderweitige Partitionen\n"
-"unangetastet behalten.\n"
-"\n"
-" * „Aktualisieren“: Mit dieser Variante können Sie eine existierende\n"
-"Mandrake Linux Version aktualisieren. Die Partitionstabellen sowie die\n"
-"persĂśnlichen Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
-"Installationsschritte werden wie bei einer Installation ausgefĂźhrt.\n"
-"\n"
-" * „Nur Pakete aktualisieren“: In dieser Variante werden alle Schritte der\n"
-"Installation, bis auf die Auswahl der zu installierenden Pakete,\n"
-"Ăźbersprungen.\n"
-"\n"
-"Je nachdem, wie viel Erfahrung Sie mit GNU/Linux haben, kĂśnnen Sie sich fĂźr\n"
-"eine der folgenden Installations- oder Aktualisierungsarten fĂźr Ihr\n"
-"Mandrake Linux System entscheiden:\n"
-"\n"
-" * Empfehlenswert: Falls Sie noch nie ein GNU/Linux Betriebssystem\n"
-"installiert haben. Die Installation wird sehr einfach sein und es werden\n"
-"Ihnen nur sehr wenige Fragen gestellt werden.\n"
-"\n"
-" * Experte: Wenn Sie den Umgang mit GNU/Linux „im Schlaf“ beherrschen und\n"
-"hochgranulare WahlmĂśglichkeiten wĂźnschen, ist dies Ihre\n"
-"Installationsmethode. Wie bei der benutzerdefinierten Installation kĂśnnen\n"
-"Sie die hauptsächliche Verwendung festlegen: „Arbeitsplatzrechner“,\n"
-"„Entwicklungsplattform“ oder „Server“. Seien Sie sehr vorsichtig, wenn Sie\n"
-"sich fĂźr diese Installationsklasse entscheiden. Die Antworten auf einige\n"
-"Fragen kĂśnnen sehr schwierig sein und Auswirkungen auf Sicherheit und\n"
-"Stabilität Ihrer Distribution haben. Wählen Sie diese Installationsklasse\n"
-"also wirklich nur wenn Sie wissen, was Sie tun!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"„DrakX“ wird aufgrund Ihrer Sprachauswahl das für Sie passende\n"
-"Tastaturlayout bereits ausgewählt haben, Sie sollten diesen Schritt\n"
-"eigentlich nicht einmal angezeigt bekommen. Doch vielleicht sind Sie mit\n"
-"dieser Auswahl nicht zufrieden (wenn Sie beispielsweise eine vom Layout\n"
-"abweichende Sprache bevorzugen). Dann gehen Sie zu diesem\n"
-"Konfigurationsschritt zurßck und wählen Sie ein passendes Layout aus der\n"
-"Liste.\n"
-"\n"
-"Sollten Sie eine andere als die zur gewählten Sprache gehÜrende Tastatur\n"
-"verwenden wollen, wählen Sie die Schaltfläche „Mehr“. Sie erhalten dann\n"
-"eine Liste aller unterstĂźtzten Tastaturen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Wählen Sie Ihre bevorzugte Sprache fßr den Installationsvorgang und\n"
-"Systemlaufzeit.\n"
-"\n"
-"Durch Betätigen der Schaltfläche „Fortgeschritten“ erhalten Sie die\n"
-"MĂśglichkeit, weitere Sprachen auf Ihrem Rechner zu installieren, um diese\n"
-"später verwenden zu kÜnnen. Wollen Sie etwa Spaniern muttersprachlichen\n"
-"Zugang zu Ihrem System erlauben, wählen Sie deutsch als Hauptsprache in der\n"
-"Liste und im Fortgeschrittenen-Bereich „Spanish|Spain“.\n"
-"\n"
-"Haben Sie eine Sprache markiert und die Wahl mit „OK“ bestätigt, gelangen\n"
-"Sie automatisch zum nächsten Schritt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"„DrakX“ versucht normalerweise die Anzahl Tasten Ihrer Maus zu erkennen.\n"
-"Sollte das nicht mĂśglich sein, so behandelt es Ihre Maus als\n"
-"Zwei-Tasten-Maus und emuliert die mittlere Taste. Es erkennt Ăźblicherweise\n"
-"korrekt, ob es sich um eine serielle, eine PS/2- oder um eine USB-Maus\n"
-"handelt.\n"
-"\n"
-"Sollte dies nicht Ihren Vorstellungen entsprechen: Wählen Sie einfach Ihren\n"
-"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
-"\n"
-"Anschließend können Sie die Funktionstüchtigkeit Ihrer Maus überprüfen.\n"
-"Verwenden Sie auch die KnĂśpfe und gegebenenfalls das Mausrad, um\n"
-"sicherzustellen, dass die festgelegten Einstellungen funktionieren. Falls\n"
-"nicht, klicken Sie auf „Abbrechen“ und wählen einen anderen Treiber aus."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Bitte wählen Sie den richtigen Anschluss aus. Die COM1-Schnittstelle unter\n"
-"Windows wird beispielsweise unter GNU/Linux als „ttyS0“ bezeichnet."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Sie kĂśnnen nun das ÂťrootÂŤ Passwort fĂźr Ihr Mandrake Linux System eingeben.\n"
-"Das Passwort muss zweimal eingegeben werden, um sicher zu stellen, dass sie\n"
-"es korrekt eingegeben haben.\n"
-"\n"
-"ÂťrootÂŤ ist das Benutzerkennzeichen des Systemadministrators. Er ist der\n"
-"einzige der berechtigt ist, neue Software zu installieren, Systemdateien zu\n"
-"ändern oder neue Benutzerkennzeichen anzulegen. Kurz gesagt: root darf\n"
-"alles! Wählen Sie deshalb das Passwort sehr sorgfältig aus! Unberechtigter\n"
-"Zugang zu diesem Kennzeichen ist extrem gefährlich fßr die Integrität Ihres\n"
-"Systems und der darauf enthaltenen Daten. Daher mĂźssen Sie auch ein\n"
-"Passwort auswählen, was nicht leicht zu erraten ist; „DrakX“ teilt Ihnen\n"
-"mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch mĂśglich ist,\n"
-"kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend davon ab!\n"
-"Glauben Sie nicht, dass nur, weil Sie GNU/Linux geladen haben, Ihre anderen\n"
-"Betriebssysteme vor Fehlern sicher sind. root hat keine Beschränkungen.\n"
-"Er kĂśnnte beispielsweise unbeabsichtigterweise alle Daten auf allen\n"
-"Partitionen lĂśschen, weil er unvorsichtigerweise auf die Partitionen selber\n"
-"zugegriffen hat!\n"
-"\n"
-"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
-"mindestens 8 Zeichen lang sein. Es sollte niemals irgendwo aufgeschrieben\n"
-"werden.\n"
-"\n"
-"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
-"es sich ohne großen Aufwand merken können.\n"
-"\n"
-"Sie mĂźssen das Passwort zweimal eingeben - ein Tippfehler beim ersten\n"
-"Versuch könnte sonst zu einem Problem werden, da Sie anschließend das\n"
-"„falsche“ Passwort bei der Verbindung mit dem System eingeben müssten.\n"
-"\n"
-"Im Expertenmodus werden Ihnen zusätzliche Optionen zur Verfßgung gestellt.\n"
-"Diese hängen davon ab, ob Sie mit sich mit einem Authentifizierungsserver\n"
-"verbinden wollen oder nicht.\n"
-"\n"
-"Falls in Ihrem Netzwerk das LDAP (oder NIS) Protokoll fĂźr die\n"
-"Authentifizierung verwendet wird, wählen Sie bitte den entsprechenden\n"
-"MenĂźpunkt. Falls Sie nicht wissen, welches Protokoll Sie verwenden, fragen\n"
-"Sie Ihren Netzwerkadministrator.\n"
-"\n"
-"Falls Ihr Rechner nicht an einem administrierten Netzwerk hängt, wählen Sie\n"
-"bitte „Lokale Dateien“ zur Authentifizierung."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"„LILO“ und „grub“ sind Betriebssystemstarter für GNU/Linux. Diese\n"
-"Installationsphase läuft in den meisten Fällen vÜllig automatisch ab.\n"
-"„DrakX“ analysiert den Bootsektor und ergreift dann die passenden\n"
-"Maßnahmen:\n"
-"\n"
-" * Findet „DrakX“ einen Windows-Bootsektor, ersetzt es ihn durch einen\n"
-"„grub“ oder „LILO“-Bootsektor. Sie erhalten dadurch die Möglichkeit, beim\n"
-"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
-"vorhanden) und Windows auszuwählen;\n"
-"\n"
-" * Findet „DrakX“ einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
-"neuen;\n"
-"\n"
-"Im Zweifelsfall bietet „DrakX“ Ihnen einen Dialog mit verschiedenen\n"
-"AuswahlmĂśglichkeiten.\n"
-"\n"
-" * „Zu verwendender Betriebssystemstarter“: Hier erhalten Sie drei\n"
-"Alternativen:\n"
-"\n"
-" * „Grub“: Falls Sie „grub“ (Textmenü) bevorzugen.\n"
-"\n"
-" * „LILO mit grafischem Menü“: Falls Sie „LILO“ mit seiner grafischen\n"
-"Oberfläche bevorzugen.\n"
-"\n"
-" * „LILO mit Textmenü“: Falls Sie „LILO“ mit Textmenü als Ihren "
-"Favoriten\n"
-"ansehen.\n"
-"\n"
-" * „Boot Gerät“: Normalerweise müssen Sie hier nichts ändern („/dev/hda“),\n"
-"Sie kĂśnnten jedoch den Starter auch auf der zweiten Platte installieren,\n"
-"(„/dev/hdb“) oder sogar auf einer Diskette („/dev/fd0“).\n"
-"\n"
-" * „Wartezeit vorm Starten des Standard Betriebssystems“: Wenn Sie Ihren\n"
-"Rechner neu starten erhalten Sie im MenĂź der zur VerfĂźgung stehenden BSe\n"
-"eine gewisse Zeit um auszuwählen, was Sie starten mÜchten. Sollten Sie\n"
-"während dieser Zeit keine Wahl getroffen haben, wird Ihr Standard-BS\n"
-"gestartet.\n"
-"\n"
-"!! Machen Sie sich klar, dass Sie sich selbst darum kĂźmmern mĂźssen,\n"
-"irgendwie Ihr Mandrake Linux-System zu starten, wenn Sie hier keinen\n"
-"Betriebssystemstarter installieren (durch Auswahl von „Abbruch“). Stellen\n"
-"Sie auch sicher, dass Sie wissen was Sie tun, wenn Sie hier Einstellungen\n"
-"verändern... !!\n"
-"\n"
-"Durch wählen der Schaltfläche „Fortgeschritten“ erhalten Sie etliche\n"
-"Optionen, die dem fortgeschrittenen Anwender vorbehalten bleiben.\n"
-"\n"
-"Mandrake Linux installiert normalerweise seinen eigenen\n"
-"Betriebssystemstarter, der Sie sowohl GNU/Linux, als auch alle anderen\n"
-"installierten Betriebssysteme starten lässt.\n"
-"\n"
-"Sollte sich auf Ihrem Rechner bereits ein anderes Betriebssystem befinden,\n"
-"so wird dieses sofern es erkannt wird automatisch zu dem StartmenĂź\n"
-"hinzugefĂźgt. Hier kĂśnnen Sie noch einige Feineinstellungen fĂźr die\n"
-"bestehenden Optionen vornehmen. Markieren Sie einen bestehenden Eintrag und\n"
-"betätigen Sie die Schaltfläche „Ändern“, um ihn anzupassen oder zu löschen;\n"
-"„Hinzufügen“ erzeugt einen neuen Eintrag und „Fertig“ bringt Sie zum\n"
-"nächsten Installationsschritt."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"„LILO“ (der LInux LOader) und „grub“ sind Betriebssystemstarter: Diese\n"
-"Programme starten entweder GNU/Linux oder die anderen Betriebssysteme, die\n"
-"auf Ihrem Rechner vorhanden sind. Normalerweise erkennen diese Werkzeuge\n"
-"alle existierenden Betriebssysteme korrekt und bieten Sie als\n"
-"Startalternativen an. Ist dies einmal nicht der Fall, kĂśnnen Sie hier\n"
-"manuell helfend eingreifen. Seien Sie jedoch vorsichtig, dass sie die\n"
-"korrekten Parameter eingeben.\n"
-"\n"
-"Eventuell mĂśchten Sie anderen Anwendern nicht die MĂśglichkeit geben, diese\n"
-"anderen Betriebssysteme zu verwenden, in diesem Fall kĂśnnen Sie den\n"
-"entsprechenden Eintrag einfach lĂśschen. Das hat jedoch zur Folge, dass sie\n"
-"eine Startdiskette benĂśtigen, um diese Betriebssysteme in Zukunft starten\n"
-"zu kĂśnnen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sie mĂźssen nun entscheiden, wo die Informationen zum Starten Ihrer\n"
-"GNU/Linux Distribution erstellt werden sollen.\n"
-"\n"
-"Sofern Sie nicht genau wissen, was sie machen sollen, wählen Sie „Erster\n"
-"Sektor der Platte (MBR)“"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Sie kÜnnen nun ein Drucksystem wählen. Wo andere Betriebssysteme Ihnen nur\n"
-"eins bieten, bietet Mandrake Linux Ihnen drei:\n"
-"\n"
-" * „pdq“ - Es steht für „print, don't queue“ (engl. für „Drucken ohne\n"
-"Warteschlange“). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
-"hängt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
-"Drucksystem Ihrer Wahl. Es kann zwar auch mit Netzwerkdruckern umgehen, ist\n"
-"dabei aber extrem langsam. Wählen Sie „pdq“, wenn Sie ein GNU/Linux Neuling\n"
-"sind. Sie kÜnnen diese Wahl später immer wieder ändern, indem Sie\n"
-"PrinterDrake im Mandrake Kontrollzentrum starten und dort die Schaltfläche\n"
-"„Expertenmodus“ betätigen.\n"
-"\n"
-" * „CUPS“ - Mit dem „Common Unix Printing System“ (engl. für „Allgemeines\n"
-"Unix-Drucksystem“) können Sie ebenso gut um auf Ihrem direkt\n"
-"angeschlossenen Drucker drucken, wie auf einem Drucker, der an einem Server\n"
-"auf der anderen Seite der Welt hängt. Es ist einfach zu bedienen und kann\n"
-"sowohl als Server als auch als Klient für das alte „lpd“-Drucksystem\n"
-"verwendet werden - Es ist somit rßckwärtskompatibel. Es ist sehr mächtig,\n"
-"in seiner Grundeinstellung verhält es sich jedoch genau wie „pdq“. Wenn Sie\n"
-"einen „lpd“ Server benötigen, müssen Sie einfach nur den „cups-lpd“ Dämon\n"
-"starten. „CUPS“ bietet grafische Konfigurations- und Druckmenüs.\n"
-"\n"
-" * „LPRng“ - „Line Printer Daemon new generation“ (engl. für\n"
-"„Zeilendrucker-Dämon - Neue Generation“). Dieses System bietet etwa das\n"
-"gleiche, was die beiden vorherigen kĂśnnen, es erlaubt Ihnen jedoch auch auf\n"
-"Drucker in Novell Netzwerken zuzugreifen, da es das IPX Protokoll\n"
-"beherrscht. Falls Sie das benĂśtigen, verwenden Sie LPRng. Andernfalls ist\n"
-"„CUPS“ vorzuziehen, da es benutzerfreundlicher ist und in\n"
-"Nicht-IPX-Netzwerken besser funktioniert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"„DrakX“ versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
-"Anderem sucht „DrakX“ auch nach PCISCSI-Karten, die es kennt, um sie\n"
-"automatisch mit dem richtigen Treiber einzubinden.\n"
-"\n"
-"Falls Sie Ăźber keinen SCSI Adapter verfĂźgen, es sich um einen ISASCSI\n"
-"Adapter handelt oder um einen PCISCSI Adapter, bei dem „DrakX“ nicht weiß,\n"
-"welcher Treiber funktioniert, werden Sie gebeten, „DrakX“ zu helfen.\n"
-"\n"
-"Ist in Ihrem Rechner kein SCSI Adapter, wählen Sie einfach „Nein“. Sollten\n"
-"Sie Sich für „Ja“ entscheiden, erscheint eine Liste, aus der Sie Ihren\n"
-"Adapter auswählen kÜnnen.\n"
-"\n"
-"Mussten Sie den Adapter aus der Liste wählen, fragt „DrakX“ Sie, ob Sie dem\n"
-"Modul Optionen übergeben wollen. Sie können „DrakX“ ruhig erlauben, erst\n"
-"einmal selbst zu versuchen, diese herauszufinden. In den meisten Fällen\n"
-"funktioniert das.\n"
-"\n"
-"Falls nicht, mĂźssen Sie die Optionen angeben. Schauen Sie im\n"
-"Installationshandbuch, wie Sie diese Informationen erhalten kĂśnnen: etwa\n"
-"unter Windows (sofern das auf Ihren Rechner installiert ist), aus den\n"
-"HandbĂźchern, die sie mit dem Adapter erhalten haben oder von den Web-Seiten\n"
-"des Hardware-Anbieters (sofern Sie einen WWW-Zugang haben)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Sie können weitere „Yaboot“ Einträge angeben, etwa für andere\n"
-"Betriebssysteme, alternative Kerne oder ein Rettungssystem.\n"
-"\n"
-"FĂźr ein anderes BS kĂśnnen Sie nur einen Namen und die Start-Partition\n"
-"angeben.\n"
-"\n"
-"FĂźr Linux gibt es einige Parameter:\n"
-"\n"
-" * „Identifikator“: Es handelt sich um den Namen, den Sie an der „Yaboot“\n"
-"Eingabeaufforderung angeben mßssen, um diese Alternative zu wählen.\n"
-"\n"
-" * „Kern“: Der Name des BS-Kerns, den sie starten wollen. Normalerweise\n"
-"handelt es sich um „vmlinuz“ oder eine Variante von „vmlinuz“ mit einer\n"
-"Versionsnummer.\n"
-"\n"
-" * „Verzeichnisbaumwurzel“: Die Verzeichnisbaumwurzel „/“ Ihrer Linux\n"
-"Installation.\n"
-"\n"
-" * „Übergeben“: Auf Apple Hardware, wird die Übergabemöglichkeit weiterer\n"
-"Kernparameter häufig verwendet, um die Grafikausgabe richtig zu\n"
-"konfigurieren oder die Tastaturemulation der MausknĂśpfe einzuschalten, da\n"
-"klassische Apple-Mäuse von Hause aus mit 2 fehlenden Maustasten\n"
-"ausgeliefert werden. Hier einige Beispiele:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * „Init-RamDisk“: Dieser Parameter kann entweder verwendet werden, um beim\n"
-"Betriebssystemstart bereits zusätzliche Kern-Module zur Verfßgung zu haben,\n"
-"ohne dass das Start-Gerät zur Verfßgung steht oder um ein RamDisk Abbild\n"
-"fßr den BS-Start in Notfällen zur Verfßgung zu haben.\n"
-"\n"
-" * „Größe der Init-RamDisk“: Standardmäßig ist eine RamDisk 4096 Bytes "
-"groß.\n"
-"Sollten Sie eine größere RamDisk benötigen, können Sie das mit diesem\n"
-"Parameter einstellen.\n"
-"\n"
-" * „Schreiben/Lesen“: Normalerweise wird die Verzeichnisbaumwurzel zuerst "
-"im\n"
-"Nur-Lese-Modus eingehängt, um eine Dateisystem Verifikation durchfßhren zu\n"
-"kĂśnnen, bevor das Betriebssystem seinen Dienst aufnimmt. Diesen Umstand\n"
-"kĂśnnen Sie hier abstellen.\n"
-"\n"
-" * „NoVideo“: Sollte sich die Apple Grafik-Hardware als extrem "
-"problematisch\n"
-"erweisen, können Sie diesen Parameter verwenden um im sog. „novideo“-Modus,\n"
-"also im FrameBuffer-Modus zu starten.\n"
-"\n"
-" * „Standard“: Wählt diesen Eintrag als Standard Linux-Kern, den Sie durch\n"
-"Drücken von [Enter] an der „Yaboot“ Eingabeaufforderung gestartet bekommen.\n"
-"Wenn Sie die [Tab]-Taste an der Eingabeaufforderung drĂźcken, erhalten Sie\n"
-"eine Liste der verfĂźgbaren Alternativen. Der Standardeintrag wird mit einem\n"
-"Stern „*“ markiert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"„Yaboot“ ist ein BS-Starter für NewWorld MacIntosh Rechner. Er kann sowohl\n"
-"GNU/Linux als auch MacOS oder MacOS X starten, falls diese auf Ihrem\n"
-"Rechner installiert sind. Normalerweise werden diese Betriebssysteme alle\n"
-"automatisch gefunden und eingebunden. Sollte dies nicht der Fall sein,\n"
-"kĂśnnen Sie diese hier manuell hinzufĂźgen. Stellen Sie jedoch sicher, die\n"
-"richtigen Parameter zu verwenden.\n"
-"\n"
-"Die Hauptparameter von „Yaboot“ sind:\n"
-"\n"
-" * „Init Nachricht“: Ein Text, der vor der Eingabeaufforderung angezeigt\n"
-"wird.\n"
-"\n"
-" * „Boot Gerät“: Hiermit wird angegeben, wohin die Informationen zum "
-"Starten\n"
-"Ihres GNU/Linux Systems geschrieben werden sollen. Sie sollten in einem\n"
-"frĂźheren Schritt bereits eine Boot-Partition angelegt haben, um diese Daten\n"
-"zu beherbergen.\n"
-"\n"
-" * „Open Firmware Verzögerung“: Im Gegensatz zu „LILO“, stehen mit „Yaboot“\n"
-"zwei VerzĂśgerungen zur VerfĂźgung. Die erste VerzĂśgerung wird in Sekunden\n"
-"angegeben und dient zur Auswahl zwischen CD, OF Boot, MacOS oder Linux.\n"
-"\n"
-" * „BS-Startverzögerung für den Kern“: Diese Verzögerung entspricht der\n"
-"„LILO“ Start-Verzögerung. Sie haben nach der Auswahl von GNU/Linux diese\n"
-"VerzĂśgerung (in 0,1 Sekunden Schritten) Zeit, bis der Standardkern geladen\n"
-"wird.\n"
-"\n"
-" * „BS-Start von CD erlauben“: Markieren dieses Punkts erlaubt es Ihnen an\n"
-"der ersten Eingabeaufforderung „C“ für den Start von CD zu wählen.\n"
-"\n"
-" * „Open Firmware Start erlauben“: Markieren dieses Punkts erlaubt es Ihnen\n"
-"an der ersten Eingabeaufforderung „N“ für den Open Firmware Start zu\n"
-"wählen.\n"
-"\n"
-" * „Standard BS“: Hiermit stellen Sie ein, welches Betriebssystem nach\n"
-"Ablauf der Open Firmware VerzĂśgerung automatisch gestartet werden soll."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hier bekommen Sie verschiedene Parameter Ihres Systems angezeigt. Je nach\n"
-"vorhandener Hardware sehen Sie hier (oder eben nicht) folgende Einträge:\n"
-"\n"
-" * „Maus“: Kontrollieren Sie die konfigurierte Maus und betätigen Sie, "
-"falls\n"
-"notwendig, die Schaltfläche.\n"
-"\n"
-" * „Tastatur“: Kontrollieren Sie die aktuelle Tastaturvorgabe und wählen "
-"Sie\n"
-"die Schaltfläche, falls Sie die Vorgabe ändern wollen.\n"
-"\n"
-" * „Zeitzone“: „DrakX“ versucht die Zeitzone anhand der gewählten Sprache "
-"zu\n"
-"„erraten“. Es ist jedoch möglich, dass Sie sich nicht in dem Land befinden,\n"
-"das die vorgegebene Sprache erahnen lässt. In diesem Fall sollten Sie die\n"
-"Schaltfläche anwählen, um die Uhr entsprechend Ihrer lokalen Zeitzone zu\n"
-"setzen.\n"
-"\n"
-" * „Drucker“: Durch Anwahl der Schaltfläche „Kein Drucker“ starten Sie den\n"
-"Druckerassistenten.\n"
-"\n"
-" * „Soundkarte“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, "
-"wird\n"
-"sie hier angezeigt. Es ist jedoch keine Änderung während der Installation\n"
-"mĂśglich.\n"
-"\n"
-" * „TV-Karte“: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird "
-"sie\n"
-"hier angezeigt. Es ist jedoch keine Änderung während der Installation\n"
-"mĂśglich.\n"
-"\n"
-" * „ISDN Karte“: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde, "
-"wird\n"
-"sie hier angezeigt. Durch Anwahl der Schaltfläche kÜnnen Sie die Parameter\n"
-"ändern."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Wählen Sie die Festplatte, die sie lÜschen wollen, um Ihre neue Mandrake\n"
-"Linux Distribution darauf zu installieren. Achtung: Alle darauf\n"
-"befindlichen Daten gehen bei diesem Schritt unwiederbringlich verloren!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/de/drakx-help.xml
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Wählen Sie „OK“, wenn Sie alle Partitionen (damit auch alle Daten) dieser\n"
-"Festplatte lÜschen wollen. Achtung: durch Betätigen dieser Schaltfläche\n"
-"werden alle Daten auf der Festplatte unwiederbringlich gelĂśscht (auch alle\n"
-"evtl. vorhandenen Windows(TM)-Daten)!\n"
-"\n"
-"Wählen Sie „Abbruch“, um die vorhandenen Daten unangetastet zu lassen und\n"
-"die Operation abzubrechen."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ich kann die Kernmodule, die zu diesem Kern passen, nicht finden (Datei %s "
-"fehlt). Das bedeutet normalerweise das Ihre Startdiskette nicht mit dem "
-"Installationsmedium Ăźbereinstimmt (Bitte erstellen Sie eine neue "
-"Startdiskette). "
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Sie mĂźssen auch %s formatieren."
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Sie haben die folgenden Server ausgewählt: %s\n"
-"\n"
-"\n"
-"Diese Server werden standardmäßig aktiviert. Sie haben keine bekannten\n"
-"Sicherheitsprobleme, es kĂśnnen jedoch irgendwann welche gefunden werden.\n"
-"In diesem Fall mĂźssen Sie sicherstellen, dass Sie so schnell wie mĂśglich\n"
-" eine Paketaktualisierung vornehmen.\n"
-"\n"
-"\n"
-"Wollen Sie diese Server wirklich installieren?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-"Ich kann kein Broadcast machen,\n"
-"da keine NIS Domäne angegeben wurde"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Legen Sie eine leere, FAT formatierte Diskette in Laufwerk %s ein."
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Diese Diskette ist nich FAT formatiert"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Um diese gespeicherte Paketauswahl zu verwenden, starten Sie die \n"
-"Installation bitte mit: „boot defcfg=floppy“"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fehler beim Lesen der Datei %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Einige Hardware Komponenten Ihres Rechners benötigen „proprietäre“\n"
-"Treiber. Weitere Infos hierzu finden Sie unter: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sie brauchen eine Verzeichnisbaumwurzel.\n"
-"Erzeugen Sie eine Partition (oder klicken Sie auf eine existierende).\n"
-"Wählen Sie „Einhängpunkt“ und setzen Sie ihn auf „/“"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Sie benĂśtigen eine Auslagerungspartition"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Sie haben keine Auslagerungspartition\n"
-"\n"
-"Wollen Sie trotzdem fortfahren?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sie müssen eine FAT Partition in „/boot/efi“ eingehängt haben."
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Freien Platz verwenden"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nicht genug freier Platz, um die neue Partition anlegen zu kĂśnnen."
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Verwende existierende Partition(en)"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Es gibt keine existierende Partition, die ich verwenden kann."
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Auf der Windows Partition Loopbacks anlegen"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Auf welche Partition wollen Sie Linux4Win installieren?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Wählen Sie die Größen"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Größe der Verzeichnisbaumwurzel-Partition in MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Größe der Auslagerungspartition in MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Den freien Platz der Windows Partition verwenden"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Bei welcher Partition wollen Sie die Größe ändern?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Errechne die Grenzen des Windows Dateisystems"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Das Werkzeug zum Verändern der FAT Partitionsgröße kann mit der \n"
-"Partition nicht arbeiten. Folgender Fehler trat auf:\n"
-"%s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Ihre Windows-Partition ist zu sehr fragmentiert.\n"
-"Starten Sie bitte erst „defrag“ unter Windows."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WARNUNG!\n"
-"\n"
-"DrakX wird nun die Größe Ihrer Windows Partition verändern.\n"
-"Seien Sie Vorsichtig: Diese Aktion ist gefährlich. Falls Sie es noch\n"
-"nicht getan haben, sollten Sie nun die Installation abbrechen, um\n"
-"scandisk (sowie mĂśglicherweise defrag) unter Windows auf die Partition \n"
-"anzuwenden. Anschließend können Sie die Installation erneut starten.\n"
-"Sie sollten natĂźrlich generell Sicherheitskopien Ihrer Daten angelegt\n"
-"haben. Falls dies der Fall ist, kĂśnnen Sie mit OK fortfahren."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Wieviel Platz benĂśtigen sie noch fĂźr Windows auf"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT Größenanpassung schlug Fehl: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Sie haben keine FAT Partition, deren Größe ich anpassen kann, bzw. die\n"
-"ich als Loopback verwenden kann (mĂśglicherweise haben Sie auch einfach\n"
-"nur nichtmehr genĂźgend freien Speicher)."
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Komplette Platte lĂśschen"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM) lĂśschen"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sie haben mehr als eine Festplatte.\n"
-"Auf welche soll GNU/Linux installiert werden?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SÄMTLICHE existierende Partitionen samt der derauf befindlichen Daten \n"
-"auf Laufwerk %s gehen dabei verloren"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Benutzerdefinierte Partitionierung"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Fdisk verwenden"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sie kĂśnnen nun %s partitionieren.\n"
-"Vergessen Sie nicht die Einstellungen mittels ,w` zu speichern, \n"
-"sobald Sie fertig sind."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Sie haben nicht genug freien Platz auf Ihrer Windows Partition."
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ich finde nicht genug Platz fĂźr die Installation."
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Der DrakX Partitionierungsassistent fand folgende LĂśsung:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Das Partitionieren schlug Fehl: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Netzwerkverbindung herstellen"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Netzwerkverbindung trennen"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Es trat ein Fehler auf. Ich weiß jedoch nicht, wie ich damit sinnvoll \n"
-"umgehen soll. Sie kĂśnnen fortfahren, jedoch auf eigenes Risiko!"
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Den Einhängpunkt %s kopieren"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Einige wichtige Pakete wurden nicht richtig installiert. \n"
-"Entweder ist Ihr CD-ROM-Laufwerk oder Ihre CD-ROM defekt. \n"
-"Testen Sie die CD-ROM auf einem Linux-Rechner mittels „rpm -qpl \n"
-"Mandrake/rpms/*.rpm“\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Willkommen auf %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Kein Disketten-Laufwerk verfĂźgbar"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Beginn von Schritt „%s“\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ihr Rechner hat nicht genug Ressourcen. Vermutlich werden bei der \n"
-"Installation Probleme auftreten. In diesem Fall sollten Sie eine \n"
-"Text-Installation versuchen. Drßcken Sie dafßr <F1> während dem \n"
-"Installationsstart und geben Sie „text“ an der Eingabeaufforderung \n"
-"ein."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installationsart"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Bitte wählen Sie eine der folgenden Installationsklassen:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Die Gesamtgröße der zu installierenden Pakete beträgt etwa %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Falls Sie weniger als diese Menge installieren wollen, \n"
-"geben Sie (in Prozent) an, wie viele Pakete Sie installieren wollen.\n"
-"\n"
-"Ein geringer Prozentsatz installiert nur die wichtigsten Pakete;\n"
-"100%% installiert alle ausgewählten Pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sie haben nur Platz fßr %d%% der ausgewählten Pakete. \n"
-"\n"
-"Falls Sie weniger als diese Menge installieren wollen, \n"
-"geben Sie (in Prozent) an, wie viele Pakete Sie installieren wollen.\n"
-"Ein geringer Prozentsatz installiert nur die wichtigsten Pakete;\n"
-"%d%% installiert so viele Pakete wie mĂśglich."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Im nächsten Schritt kÜnnen Sie genauer auswählen"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prozent der zu installierenden Pakete"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Auswahl der Paketgruppen"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individuelle Paketauswahl"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Gesamtgröße: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "UngĂźltiges Paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Name: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Größe: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Wichtigkeit: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Sie kÜnnen dieses Paket nicht auswählen, da Sie nicht genug Plattenplatz "
-"haben."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Die folgenden Pakete werden installiert werden"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Die folgenden Pakete werden entfernt"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Sie kÜnnen dieses Paket nicht auswählen/es aus der Auswahl entfernen."
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Dieses Paket ist existenziell, sie kĂśnnen es nicht deselektieren"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-"Sie kĂśnnen dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es ist bereits installiert!"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dieses Paket muss aktualisiert werden.\n"
-"Sind Sie sicher, dass Sie es aus der Auswahl entfernen wollen?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Sie kĂśnnen dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es muss aktualisiert werden!"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Anzeige automatisch markierter Pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installation"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Laden von/Speichern auf Diskette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Erneuere Paket Auswahl"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimal-Installation"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Zu installierende Pakete auswählen"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installation wird durchgefĂźhrt"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Schätzung"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Verbleibende Zeit "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Bitte warten, bereite Installation vor"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d Pakete"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation des Pakets %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akzeptieren"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "ZurĂźckweisen"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Bitte wechseln Sie die CD!\n"
-"\n"
-"Bitte legen Sie die CD-ROM „%s“ in Ihr Laufwerk,\n"
-"dann drĂźcken Sie OK.\n"
-"Falls Sie sie nicht vorliegen haben, drĂźcken Sie Abbruch."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Achtung\n"
-"\n"
-"Bitte lesen Sie die nachfolgenden Ausfßhrungen sorgfältig. Wenn Sie mit\n"
-"irgendeinem Teil nicht einverstanden sind, dĂźrfen Sie nicht den Inhalt\n"
-"der folgenden CDs installieren. Klicken Sie auf „Zurückweisen“, um die\n"
-"Installation ohne Verwendung dieser CDs fortzusetzen.\n"
-"\n"
-"\n"
-"Einige Komponenten auf den nachfolgenden CDs unterliegen nicht der GPL\n"
-"oder ähnlichen Lizenzabkommen. Jede dieser Komponenten unterliegt dann\n"
-"den Bedingungen ihrer eigenen spezifischen Lizenz.\n"
-"Bitte lesen Sie diese Lizenzen sorgfältig und nur wenn Sie mit ihnen\n"
-"einverstanden sind, dĂźrfen Sie die entsprechenden Produkte entsprechend\n"
-"ihrer Lizenz benutzen und weitergeben.\n"
-"Solche Lizenzen verbieten im allgemeinen das Transferieren, Duplizieren\n"
-"(außer für Sicherheitskopien), Weitergeben, Decompilieren, Disassamblen\n"
-"oder Verändern der Komponente.\n"
-"Jeder Bruch des Lizenzabkommens beendet sofort die Ihnen im Rahmen der\n"
-"Lizenz eingeräumten Rechte. Wenn die jeweilige Lizenz Ihnen nicht\n"
-"entsprechende Rechte einräumt, dßrfen Sie die Programme nicht auf mehr\n"
-"als einem System installieren oder zur Benutzung in einem Netzwerk\n"
-"einrichten. Im Zweifelsfall kontaktieren Sie bitte den Vertreiber oder\n"
-"Herausgeber der jeweiligen Komponente.\n"
-"Transfer an Dritte oder Kopieren solcher Komponenten inklusive ihrer\n"
-"Dokumentation ist normalerweise verboten.\n"
-"\n"
-"\n"
-"Alle Rechte an den Komponenten der nachfolgenden CDs liegen bei den\n"
-"jeweiligen Autoren und sind durch die Urheberrechtsgesetze fĂźr\n"
-"Softwareprodukte geschĂźtzt.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Es ist ein Fehler aufgetreten"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "MĂśchten Sie die Installation wirklich beenden?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lizenz"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Bei dieser Übersetzung handelt es sich um eine inoffizielle Übersetzung\n"
-"der Mandrake Linux-Lizenz in die deutsche Sprache. Sie ist keine\n"
-"rechtsverbindliche Darstellung der Lizenzbedingungen der Software in\n"
-"dieser Distribution - nur der ursprĂźngliche franzĂśsische Text der\n"
-"Mandrake Linux Lizenz ist rechtsverbindlich. Wir hoffen aber, dass diese\n"
-"Übersetzung den deutschsprechenden Benutzern das Verständnis dieser\n"
-"Lizenz erleichtert.\n"
-"\n"
-"\n"
-"EinfĂźhrung\n"
-"\n"
-"Das Betriebssystem und die anderen Komponenten, die in Mandrake Linux\n"
-"enthalten sind, werden hier „Software-Produkte“ genannt. Die\n"
-"Software-Produkte umfassen, aber sind nicht beschränkt auf, die\n"
-"Gesamtheit der Programme, Methoden, Regeln, und Dokumentation, welche\n"
-"zum Betriebssystem und den anderen Komponenten der Mandrake Linux\n"
-"Distribution gehĂśren.\n"
-"\n"
-"\n"
-"1. Lizenzabkommen\n"
-"\n"
-"Bitte lesen Sie dieses Dokument sorgfältig. Dieses Dokument ist ein\n"
-"Lizenzabkommen zwischen Ihnen und MandrakeSoft S. A. welches sich auf\n"
-"die Software-Produkte bezieht.\n"
-"Durch Installation, Duplizierung oder Benutzung der Software-Produkte in\n"
-"irgendeiner Art und Weise erklären Sie sich mit den Bedingungen dieser\n"
-"Lizenz einverstanden.\n"
-"Wenn Sie mit irgendeinem Punkt dieser Lizenz nicht einverstanden sind,\n"
-"ist es Ihnen nicht erlaubt, die Software-Produkte zu installieren,\n"
-"duplizieren oder zu benutzen.\n"
-"Mit jedem Versuch, die Software-Produkte in einer Art und Weise zu\n"
-"benutzen, die nicht den Bedingungen dieser Lizenz entspricht, verlieren\n"
-"Sie die Ihnen mit dieser Lizenz eingeräumten Rechte. In diesem Fall\n"
-"haben Sie unverzĂźglich alle Kopien der Software-Produkte zu vernichten.\n"
-"\n"
-"\n"
-"2. Eingeschränkte Garantie\n"
-"\n"
-"Die Software-Produkte und die beigefĂźgte Dokumentation werden dem\n"
-"Benutzer lediglich zur VerfĂźgung gestellt, es wird keinerlei Garantie\n"
-"gegeben soweit es gesetzlich zulässig ist.\n"
-"MandrakeSoft S. A. haftet unter keinen Umständen, soweit gesetzlich\n"
-"zulässig, fßr direkte oder indirekte Schäden irgendwelcher Art,\n"
-"(inklusive uneingeschränkt Schäden aufgrund Verlust von\n"
-"Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, GebĂźhren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund der Benutzung oder\n"
-"der UnmĂśglichkeit der Benutzung der Software-Produkte entstehen, auch\n"
-"wenn MandrakeSoft S. A. Ăźber die MĂśglichkeit und das Auftreten\n"
-"derartiger Schäden unterrichtet wurde.\n"
-"\n"
-"\n"
-"EINGESCHRÄNKTE VERANTWORTLICHKEIT BEZOGEN AUF DEN BESITZ UND DIE\n"
-"BENUTZUNG VON SOFTWARE, DIE IN EINIGEN LÄNDERN VERBOTEN IST.\n"
-"\n"
-"\n"
-"Soweit gesetzlich zulässig, haften MandrakeSoft S. A. und deren\n"
-"Vertreiber unter keinen Umständen fßr direkte oder indirekte Schäden\n"
-"irgendwelcher Art, (inklusive uneingeschränkt Schäden aufgrund Verlust\n"
-"von Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, GebĂźhren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund des Besitzes und\n"
-"der Benutzung von Software-Komponenten oder aufgrund des Ladens von\n"
-"Software-Komponenten von den Internet-Servern von MandrakeSoft S. A.,\n"
-"deren Besitz und Benutzung in einigen Ländern aufgrund lokaler Gesetze\n"
-"nicht gestattet ist, entstehen.\n"
-"Diese Einschränkung der Verantwortlichkeit bezieht sich auch, aber nicht\n"
-"nur, auf die Komponenten fĂźr starke Kryptografie enthalten in den\n"
-"Software-Produkten.\n"
-"\n"
-"\n"
-"3. Die GPL und verwandte Lizenzen\n"
-"\n"
-"Die Software-Produkte bestehen aus Komponenten, die von verschiedenen\n"
-"Personen und Einrichtungen erstellt wurden. Die meisten Komponenten\n"
-"unterliegen den Bedingungen der GNU General Public License, im folgenden\n"
-"„GPL“ genannt, oder ähnlichen Lizenzen. Die meisten dieser Lizenzen\n"
-"erlauben es, die Komponenten, die diesen Lizenzen unterliegen, zu\n"
-"benutzen, zu duplizieren, anzupassen, und weiterzugeben. Bitte lesen sie\n"
-"sorgfältig die Bedingungen der Lizenzabkommen von jeder Komponente,\n"
-"bevor Sie sie benutzen. Jegliche Frage zur Lizenz einer Komponente ist an\n"
-"den Autor der Komponente und nicht an MandrakeSoft S. A. zu richten. Die\n"
-"von MandrakeSoft S. A. erstellten Programme unterliegen der GPL.\n"
-"Von MandrakeSoft S. A. geschriebene Dokumentation unterliegt einer\n"
-"spezifischen Lizenz. Bitte lesen Sie die Dokumentation fĂźr weitere\n"
-"Details.\n"
-"\n"
-"\n"
-"4. Geistiges Eigentum\n"
-"\n"
-"Alle Rechte an den Komponenten der Software-Produkte liegen bei den\n"
-"entsprechenden Autoren und sind durch die Urheberrechtsgesetze fĂźr\n"
-"Softwareprodukte geschĂźtzt.\n"
-"MandrakeSoft S. A. behält sich das Recht vor, die Software-Produkte zu\n"
-"modifizieren und anzupassen.\n"
-"„Mandrake“, „Mandrake Linux“ und entsprechende Logos sind eingetragene\n"
-"Warenzeichen der MandrakeSoft S. A..\n"
-"\n"
-"\n"
-"5. Gesetzliche Bestimmungen\n"
-"\n"
-"Wenn irgendein Teil dieses Lizenzabkommens durch einen Gerichtsentscheid\n"
-"fßr ungßltig, illegal oder inakzeptabel erklärt wird, wird dieser Teil\n"
-"aus dem Abkommen ausgeschlossen. Sie bleiben weiterhin an die anderen,\n"
-"anwendbaren Teile gebunden.\n"
-"Die Bedingungen dieses Lizenzabkommens unterliegen den Gesetzen von\n"
-"Frankreich. Alle Unstimmigkeiten bezĂźglich der Bedingungen dieser Lizenz\n"
-"werden vorzugsweise außergerichtlich beigelegt. Letztes Mittel ist das\n"
-"zuständige Gericht in Paris, Frankreich.\n"
-"Zu jeglicher Frage zu diesem Dokument kontaktieren Sie bitte\n"
-"MandrakeSoft S. A..\n"
-"Introduction\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"Hier die franzĂśsche Version:\n"
-"\n"
-"Le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux sont ci-après dÊnommÊs ensemble les \n"
-" Logiciels . Les Logiciels comprennent notamment, mais de façon non \n"
-"limitative, l'ensemble des programmes, procÊdÊs, règles et documentations \n"
-"relatifs au système d'exploitation et aux divers composants de la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licence\n"
-"\n"
-"Veuillez lire attentivement le prĂŠsent document. Ce document constitue \n"
-"un contrat de licence entre vous (personne physique ou personne morale) et \n"
-"MandrakeSoft S.A. portant sur les Logiciels.\n"
-"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
-"manière que ce soit indique que vous reconnaissez avoir prÊalablement eu \n"
-"connaissance et que vous acceptez de vous conformer aux termes et "
-"conditions \n"
-"du prĂŠsent contrat de licence. En cas de dĂŠsaccord avec le prĂŠsent "
-"document \n"
-"vous n'ĂŞtes pas autorisĂŠ Ă  installer, reproduire et utiliser de quelque \n"
-"manière que ce soit ce produit.\n"
-"Le contrat de licence sera rĂŠsiliĂŠ automatiquement et sans prĂŠavis dans le \n"
-"cas oĂš vous ne vous conformeriez pas aux dispositions du prĂŠsent document. \n"
-"En cas de rĂŠsiliation vous devrez immĂŠdiatement dĂŠtruire tout exemplaire "
-"et \n"
-"toute copie de tous programmes et de toutes documentations qui constituent \n"
-"le système d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantie et limitations de garantie\n"
-"\n"
-"Les Logiciels et la documentation qui les accompagne sont fournis en "
-"l'ĂŠtat \n"
-"et sans aucune garantie. MandrakeSoft S.A. dĂŠcline toute responsabilitĂŠ \n"
-"dĂŠcoulant d'un dommage direct, spĂŠcial, indirect ou accessoire, de quelque \n"
-"nature que ce soit, en relation avec l'utilisation des Logiciels, "
-"notamment \n"
-"et de façon non limitative, tout dommage entraÎnÊ par les pertes de \n"
-"bĂŠnĂŠfices, interruptions d'activitĂŠ, pertes d'informations commerciales ou \n"
-"autres pertes pĂŠcuniaires, ainsi que des ĂŠventuelles condamnations et \n"
-"indemnitĂŠs devant ĂŞtre versĂŠes par suite d'une dĂŠcision de justice, et ce \n"
-"mĂŞme si MandrakeSoft S.A. a ĂŠtĂŠ informĂŠe de la survenue ou de \n"
-"l'ĂŠventualitĂŠ de tels dommages.\n"
-"\n"
-"AVERTISSEMENT QUANT A LA DETENTION OU L'UTILISATION DE LOGICIELS \n"
-"PROHIBES DANS CERTAINS PAYS \n"
-"\n"
-"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront ĂŞtre \n"
-"tenus responsable Ă  raison d'un prĂŠjudice spĂŠcial, direct, indirect ou \n"
-"accessoire, de quelque nature que ce soit (notamment et de façon non \n"
-"limitative les pertes de bĂŠnĂŠfices, interruptions d'activitĂŠ, pertes \n"
-"d'informations commerciales ou autres pertes pĂŠcuniaires, ainsi que \n"
-"des ĂŠventuelles condamnations et indemnitĂŠs devant ĂŞtre versĂŠes par suite \n"
-"d'une dĂŠcision de justice) qui ferait suite Ă  l'utilisation, la dĂŠtention \n"
-"ou au simple tĂŠlĂŠchargement depuis l'un des sites de tĂŠlĂŠchargement de \n"
-"Mandrake Linux de logiciels prohibĂŠs par la lĂŠgislation Ă  laquelle vous \n"
-"ĂŞtes soumis. Cet avertissement concerne notamment certains logiciels de \n"
-"cryptographie fournis avec les Logiciels.\n"
-"\n"
-"\n"
-"3. Licence GPL et autres licences\n"
-"\n"
-"Les Logiciels sont constituĂŠs de modules logiciels crĂŠĂŠs par diverses \n"
-"personnes (physiques ou morales). Nombre d'entre eux sont distribuĂŠs sous \n"
-"les termes de la GNU General Public Licence (ci-après dÊnommÊe  GPL ) ou \n"
-"d'autres licences similaires. La plupart de ces licences vous permettent \n"
-"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
-"rĂŠgissent. Veuillez lire et agrĂŠer les termes et conditions des licences \n"
-"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
-"concernant la licence de chaque Logiciel est Ă  soumettre Ă  l'auteur (ou \n"
-"ses reprĂŠsentants) du Logiciel et non Ă  MandrakeSoft. \n"
-"Les programmes conçus par MandrakeSoft sont rÊgis par la licence GPL. \n"
-"La documentation rĂŠdigĂŠe par MandrakeSoft fait l'objet d'une licence \n"
-"spĂŠcifique. Veuillez vous rĂŠfĂŠrez Ă  la documentation pour obtenir plus \n"
-"de prĂŠcisions.\n"
-"\n"
-"\n"
-"4. PropriĂŠtĂŠ intellectuelle\n"
-"\n"
-"Tous les droits, titres et intĂŠrĂŞts des diffĂŠrents Logiciels sont la \n"
-"propriĂŠtĂŠ exclusive de leurs auteurs respectifs et sont protĂŠgĂŠs au titre \n"
-"des droits de propriĂŠtĂŠ intellectuelle et autres lois rĂŠgissant le droit \n"
-"des Logiciels. Les marques ÂŤ Mandrake Âť et ÂŤ Mandrake Linux Âť ainsi que "
-"les \n"
-"logotypes associĂŠs sont dĂŠposĂŠs par MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Dispositions diverses\n"
-"\n"
-"Si une disposition de ce contrat de licence devait ĂŞtre dĂŠclarĂŠe nulle, \n"
-"illĂŠgale ou inapplicable par un tribunal compĂŠtent, cette disposition sera \n"
-"exclue du prĂŠsent contrat. Vous continuerez Ă  ĂŞtre liĂŠs aux autres \n"
-"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
-"est soumis à la Loi française. Toute contestation relative aux prÊsentes \n"
-"sera rĂŠglĂŠe prĂŠalablement par voie amiable. A dĂŠfaut d'accord avec \n"
-"MandrakeSoft S.A., les tribunaux compĂŠtents de Paris seront saisis du \n"
-"litige. Pour toute question relative au prĂŠsent document, veuillez \n"
-"contacter MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hier die Liste aller Tastaturen"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Welche Installationsart wollen Sie durchfĂźhren?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installation/Aktualisierung"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Handelt es sich um eine Installation oder eine Aktualisierung?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Empfehlenswert"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Experte"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Aktualisierung"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Nur Pakete aktualisieren"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Bitte wählen Sie Ihren Maustyp."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Maus Port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihre Maus hängt."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Tastenemulation"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulation der 2. Taste"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulation der 3. Taste"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA Karten konfigurieren ..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE konfigurieren"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Keine Partition verfĂźgbar"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Durchsuchen der Partitionen, um die Einhängpunkte zu finden."
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Wählen Sie die Einhängpunkte"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Vermutlich ist Ihre Partitionstabelle fehlerhaft, ich habe Probleme,\n"
-"sie zu lesen :-( (Folgender Fehler trat auf: „%s“).\n"
-"Ich kann fortfahren, indem ich die fehlerhaften Partitionen lĂśsche \n"
-"(dabei gehen ALLE darauf vorhandenen DATEN VERLOREN!). Alternativ kĂśnnen \n"
-"Sie mir jedoch auch verbieten, die Partitionstabelle zu verändern.\n"
-"\n"
-"Sind Sie einverstanden, dass ich die problematischen Partitionen lĂśsche?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ist nicht in der Lage, Ihre Partitionstabelle korrekt zu \n"
-"interpretieren. Sie kĂśnnen fortfahren, jedoch auf eigenes Risiko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Sie haben keinen Platz für die 1 MB große Start-Partition vorgesehen! Die "
-"Installation wird fortgesetzt, Sie mĂźssen jedoch eine Start-Partition mit "
-"DiskDrake erstellen."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Es wurde keine Verzeichnisbaumwurzel gefunden, die aktualisiert werden kann."
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Verzeichnisbaumwurzel"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Welche Partition ist Ihre Verzeichnisbaumwurzel?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sie müssen Ihren Rechner neu starten, um die Änderungen \n"
-"der Partitionstabelle wirksam werden zu lassen."
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Zu formatierende Partitionen auswählen"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Soll ich nach defekten BlĂścken suchen?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Partitionen formatieren"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Erzeugen und formatieren der Datei %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Der Swap-Bereich ist zu klein, um die Installation zu ermĂśglichen! \n"
-"Bitte vergrößern Sie den Bereich."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Suche nach vorhandenen Paketen"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Finden der zu aktualisierenden Pakete"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Es steht auf Ihrem System nicht genĂźgend Speicherplatz fĂźr die \n"
-"Installation bzw. Aktualisierung zur VerfĂźgung (%d > %d)."
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Komplett (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimal (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Empfohlen (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Bitte wählen Sie, ob die Paketauswahl von Diskette geladen \n"
-"oder darauf gespeichert werden soll. Es handelt sich um das \n"
-"selbe Format, wie die unter „auto_install“ erzeugten Disketten."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Von Diskette laden"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Laden von Diskette ..."
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Auswahl der Pakete"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr ""
-"Legen Sie eine Diskette ein, auf der Ihre Paketauswahl gespeichert ist."
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Auf Diskette speichern"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Gewünschte Größe übersteigt den verfügbaren Platz"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Installationsklasse"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Sie haben keine Paketgruppe ausgewählt\n"
-"Bitte wählen Sie die minimale Installation, die Sie wßnschen."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Mit X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Mit minimaler Dokumentation (Empfohlen)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Extrem minimale Installation (ohne „urpmi“)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Falls Sie alle aufgeführten CDs haben, wählen Sie „OK“, \n"
-"falls Sie keine der aufgeführten CDs haben, wählen Sie „Abbruch“,\n"
-"falls nur einige der aufgefĂźhrten CDs fehlen, entfernen Sie die \n"
-"entsprechende Markierung und wählen Sie dann „OK“."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM „%s“"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Installation vorbereiten"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installiere Paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Einstellungen fĂźr nach der Installation"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Bitte legen Sie die Startdiskette in Laufwerk %s ein."
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr ""
-"Bitte legen Sie die Diskette der zu aktualisiernden Module in Laufwerk %s "
-"ein."
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sie haben nun die MĂśglichkeit Software mit starker VerschlĂźsselung aus dem \n"
-"Internet zu laden.\n"
-"\n"
-"WARNUNG:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall MandrakeSoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"Bitte wenden Sie sich für alle weiteren Fragen bzgl. dieser Übereinkunft "
-"an: \n"
-"MandrakeSoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sie haben nun die MĂśglichkeit Pakete zu installieren, die nach Erscheinen\n"
-"der Distribution aktualisiert wurden. Es handelt sich um \n"
-"Sicherheitsaktualisierungen und Fehlerkorrekturen.\n"
-"\n"
-"Allerdings benĂśtigen Sie dafĂźr eine funktionierende Internertverbindung.\n"
-"\n"
-"MĂśchten Sie die Aktualisierungen vornehmen?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Verbindung mit dem Mandrake Linux Web-Server aufbauen, um eine Liste\n"
-"verfĂźgbarer Pakete zu erhalten."
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Bitte wählen Sie einen Mirror, von dem Sie die Pakete holen wollen."
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Verbindung mit dem Mirror aufbauen, um eine Liste verfĂźgbarer Pakete zu "
-"erhalten."
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Wählen Sie Ihre Zeitzone"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardware Uhr liefert GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatische Zeit-Synchronisation (durch NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "CUPS-Server auf der Gegenseite"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Kein Drucker"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "VerfĂźgen Sie Ăźber eine ISA soundkarte?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Starten Sie „sndconfig“ nach der Installation, um Ihre Soundkarte "
-"einzurichten."
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Es wurde keine Soundkarte gefunden. Versuchen Sie „harddrake“nach der "
-"Installation."
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Zusammenfassung"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Maus"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zeitzone"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Drucker"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN Karte"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Soundkarte"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-Karte"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokale Dateien"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Root-Passwort setzen"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Kein Passwort"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Authentifizierung"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domain"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mit einer individuellen Startdiskette kĂśnnen Sie Ihr LINUX-System starten, \n"
-"ohne auf einen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nĂźtzlich, \n"
-"wenn Sie SILO nicht auf Ihrem System installieren mĂśchten, wenn ein \n"
-"anderes Betriebssystem SILO entfernt hat oder Ihre Hardware-Konfiguration \n"
-"die Verwendung eines BS-Starters nicht korrekt verarbeitet. \n"
-"Eine individuelle Startdiskette kann auch in Verbindung mit der \n"
-"Mandrake Linux Rettungsdiskette verwendet werden, wodurch das System \n"
-"nach schwerwiegenden Fehlern viel einfacher wiederhergestellt werden \n"
-"kann.\n"
-"\n"
-"Falls Sie eine Startdiskette erstellen wollen, legen Sie eine Diskette \n"
-"ohne relevante Daten in ihr erstes Laufwerk und drücken Sie „OK“."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "erste Disketten-Laufwerk"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "zweite Disketten-Laufwerk"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Überspringen"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mit einer individuellen Startdiskette kĂśnnen Sie Ihr LINUX-System starten, \n"
-"ohne auf den normalen Betriebssystemstarter angewiesen zu sein. Dies ist "
-"nĂźtzlich, wenn \n"
-"Sie weder LILO noch Grub auf Ihrem System installieren mĂśchten, wenn ein \n"
-"anderes Betriebssystem Ihren Betriebssystemstarter entfernt hat oder Ihre "
-"Hardware-Konfiguration die Verwendung eines Betriebssystemstarters nicht "
-"korrekt \n"
-"verarbeitet. Eine individuelle Startdiskette kann auch mit der Linux \n"
-"Mandrake Rettungsdiskette verwendet werden, wodurch das System nach \n"
-"schwerwiegenden Fehlern viel einfacher wiederhergestellt werden kann.\n"
-"\n"
-"MĂśchten Sie jetzt eine Startdiskette fĂźr Ihr System erstellen?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(WARNUNG! Sie verwenden XFS fĂźr Ihre Verzeichnisbaumwurzel.\n"
-"Das Erstellen einer Startdiskette auf einem 1,44 MB Medium \n"
-"schlä sicher fehl, da XFS einen sehr großen Treiber benötigt)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ich kann kein Laufwerk finden"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Wählen Sie das Laufwerk, in dem Sie die Start-Diskette erstellen wollen"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr ""
-"Legen Sie eine Diskette, die keine relevanten Daten mehr enthällt in das %s "
-"ein."
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Startdiskette wird erstellt..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Betriebssystemstarter vorbereiten"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Sie scheinen einen „OldWorld“ oder unbekannten\n"
-"Rechner zu verwenden. Der Betriebssystemstarter\n"
-"„yaboot“ wird daher leider nicht funktionieren.\n"
-"Die Installation wird fortgesetzt, sie werden jedoch \n"
-"„BootX“ verwenden müssen um LINUX auf Ihrem Rechner\n"
-"zu starten."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Möchten Sie „aboot“ verwenden?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fehler bei der Installation von aboot. Soll ich die Installation \n"
-"mit Gewalt versuchen, auch wenn dies die ZerstĂśrung der ersten \n"
-"Partition verursachen kann?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "BS-Starter installieren"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Die Installation des BS-Starters schlug Fehl. Folgender Fehler trat auf:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sie mßssen Ihr Open Firmware Startgerät anpassen, dass es den \n"
-"BS-Starter erkennt. Falls Sie beim Neustart nicht die \n"
-"Eingabeaufforderung des BS-Starters sehen, drĂźcken Sie \n"
-"Strg-Option-O-F und geben Sie folgendes ein:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-"Tippen Sie dann: shut-down\n"
-"Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Legen Sie eine leere Diskette in das %s ein."
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Einige Schritte sind noch nicht komplett.\n"
-"\n"
-"Wollen Sie DrakX wirklich beenden?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Herzlichen GlĂźckwunsch, die Installation ist abgeschlossen.\n"
-"Entfernen Sie die Startmedien (CD-ROMs / Disketten) und drĂźcken Sie die "
-"Eingabetaste zum Neustart Ihres Rechners.\n"
-"\n"
-"FĂźr Informationen zu Sicherheitsaktualisierungen dieser Version von Mandrake "
-"Linux informieren Sie sich bitte unter \n"
-"\n"
-"http://www.mandrakelinux.com/en/82errata.php3\n"
-"\n"
-"Wie Sie Ihr System warten können, erfahren Sie im Kapitel „Nach der "
-"Installation“ im offiziellen Benutzerhandbuch von Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Die automatische Installation kann, falls Sie wollen,\n"
-"vollautomatisch erfolgen. In diesem Fall wird die\n"
-"Festplatte vollständig durch DrakX rekonfiguriert\n"
-"(diese MĂśglichkeit ist fĂźr die Replikation auf anderen\n"
-"Rechnern gedacht).\n"
-"\n"
-"Vermutlich werden Sie es vorziehen, erneut eine normale\n"
-"Installation durchzufĂźhren.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatisiert"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Erneut abspielen"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Paketauswahl speichern"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installation %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> nächstes Element | <Leertaste> auswählen | <F12> weiter "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "Ich kann „kdesu“ nicht finden!"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "Das Programm „consolehelper“ wurde nicht gefunden."
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Wählen Sie eine Datei"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Fortgeschritten"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Einfach"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Bitte warten"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Baum erweitern"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Baum verkleinern"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Umschalten zwischen unsortiert und gruppiert"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Schlechte Wahl, bitte versuchen Sie es noch einmal\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ihre Wahl? (Standard ‚%s‘) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Angaben, die Sie machen mĂźssen:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ihre Wahl? (0/1, Standard ‚%s‘) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Schaltfläche „%s“: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "MÜchten Sie diese Schaltfläche betätigen?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ihre Wahl? (Standard „%s“ %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Es gibt zahlreiche AuswahlmĂśglichkeiten (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Bitte wählen Sie die Nummer aus dem Bereich, die Sie bearbeiten wollen,\n"
-"oder betägen Sie die Eingabetaste um fort zu fahren.Ihre Wahl? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Anmerkung: Ein Eintrag wurde geändert:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Erneut verschicken"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tschechien (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Deutschland"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spanien"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finnland"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Frankreich"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norwegen"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polen"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Russland"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Schweden"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Grßbritannien"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanien"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenien (alt)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenien (Schreibmaschine)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenien (Phonetisch)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbeidschan (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgien"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgarien (Phonetisch)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgarien (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilien (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Weißrussland"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Schweiz (deutsches Layout)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Schweiz (franzĂśsisches Layout)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tschechien (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Deutschland (ohne Tod-Tasten)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dänemark"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegen)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Schweden)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estland"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgien (Kyrillisches Layout)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgien (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Griechenland"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungarn"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatien"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israel"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israel (Phonetisch)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Island"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italien"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japan (106 Tasten)"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korea"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Lateinamerika"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litauen (AZERTY - alt)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litauen (AZERTY - neu)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litauen (QWERTY - „number row“)"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauen (QWERTY - Phonetisch)"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Lettland"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Mazedonien"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Niederlande"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polen (QWERTY Layout)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polen (QWERTZ Layout)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugal"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumänien (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumänien (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Russland (YaWERTY)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slowenien"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slowakei (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slowakei (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbien (Kyrillisches Layout)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Indien (Tamilisches Layout)"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailändische Tastatur"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tadschikistan"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türkei (traditionelles „F“ Modell)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türkei (modernes „Q“ Modell)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraine"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Vereinigte Staaten von Amerika (international)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam QWERTY („number row“)"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslawien (Lateinisches Layout)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "AltGr-Taste"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Beide Umschalttasten gleichzeitig"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Strg und Umschalttaste gleichzeititg"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "CapsLock Taste"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Strg und Alt gleichzeitig"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt und Umschalttaste gleichzeitig"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "MenĂźtaste"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Linke „Windows“-Taste"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Rechte „Windows“-Taste"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Schleife bei den Einhängpunkten %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Entfernen Sie erst die Logischen Medien\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Die PCMCIA-UnterstĂźtzung fĂźr 2.2er Kerne wurde eingestellt. Verwenden Sie "
-"bitte einen 2.4er Kern."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Maus"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MausMan/FirstMaus (Seriell)"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generische PS2 Rad-Maus"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Maus"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMaus"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 Taste"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generische 2 Tasten Maus"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generisch"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rad"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "Seriell"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generische 3 Tasten Maus"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMaus"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MausMan/FirstMaus"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serie"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MausMan+/FirstMaus+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serie"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Maus (Seriell, alter C7 Typ)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "Bus-Maus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 Tasten"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 Tasten"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "keine"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Keine Maus"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Bitte testen Sie Ihre Maus"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Um Ihre Maus zu aktivieren:"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEGEN SIE IHR MAUS-RAD!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Beenden"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Weiter ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- ZurĂźck"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ist dies richtig?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Internetverbindung"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Der gebräuchlichste Weg mit ADSL eine Verbindung aufzubauen ist pppoe.\n"
-"Einige Verbindungen benutzen jedoch pptp, andere dhcp.\n"
-"Wenn Sie nicht wissen was Sie brauchen, wählen Sie „pppoe verwenden“"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "DHCP verwenden"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "PPPOE verwenden"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "PPTP verwenden"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Welchen DHCP Klienten wollen Sie verwenden?\n"
-"Voreingestellt ist „dhcpcd“"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ich habe keine Ethernet-Netzwerkkarte finden kĂśnnen, daher kanndieser "
-"Verbindungstyp nicht konfiguriert werden."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Wählen Sie die Netzwerkkarte"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Bitte wählen Sie, ßber welches Netzwerkgerät Sie die \n"
-"Internetverbindung herstellen wollen."
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Keine Netzwerkkarte gefunden"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Einige DHCP-Server benĂśtigen ihn, um korrekt zu arbeiten.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Rechnername"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Netzwerk Konfigurationsassistent"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Externes ISDN Modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interne ISDN Karte"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Um welchen Typ ISDN-Verbindung handelt es sich?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Welche ISDN Konfiguration wollen Sie durchfĂźhren?\n"
-"\n"
-"* Die alte Konfiguration verwendet „isdn4net“. Sie \n"
-" enthällt mächtigere Werkzeuge, ist jedoch komplizierter \n"
-" einzurichten und nicht voll standardkonform.\n"
-"\n"
-"* Die neue Konfiguration mit „isdn-light“ ist \n"
-" verständlicher und standardkonformer, sie enthällt \n"
-" jedoch weniger Werkzeuge.\n"
-"\n"
-"Wir empfehlen die „isdn-light“ Variante.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Neue Konfiguration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Alte Konfiguration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN Konfiguration"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Wählen Sie Ihren Netzanbieter.\n"
-"Sollte er nicht aufgeführt sein, wählen Sie „Nicht aufgeführt“"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europäisches Protokoll"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europäisches Protokoll (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll fĂźr den Rest der Welt"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokoll fĂźr den Rest der Welt \n"
-"ohne D-Kanal (Leased Lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Welches Protokoll wollen Sie verwenden?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Welchen Kartentyp verwenden Sie?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Keine Ahnung"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA/PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Falls Sie eine ISA-Karte besitzen, sollten die Einstellungen auf dem "
-"nächsten Schirm korrekt sein.\n"
-"\n"
-"Falls Sie eine PCMCIA-Karte besitzen, mĂźssen Sie IRQ und E/A-Bereich Ihrer "
-"Karte kennen.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abbruch"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Fortfahren"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Bitte wählen Sie Ihre ISDN Karte"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ich habe eine PCI ISDN-Karte gefunden, \n"
-"kenne sie jedoch nicht. Bitte helfen Sie mir,\n"
-"indem Sie im nächsten Menß eine auswählen."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Ich konnte keine PCI ISDN-Karte finden.\n"
-"Bitte wählen Sie im nächsten Menß eine aus."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihr Modem hängt."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Einwahl Parameter"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Name der Verbindung"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skript-basiert"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-basiert"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Name der Domäne"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Erster DNS Server (optional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Zweiter DNS Server (optional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie kĂśnnen die Verbindung trennen oder sie neu konfigurieren."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Sie kĂśnnen Ihre Internetverbindung neu konfigurieren"
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Sie sind momentan mit dem Internet verbunden."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Sie kĂśnnen eine Internetverbindung aufbauen oder die Verbindung neu "
-"konfigurieren"
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Sie sind momentan nicht mit dem Internet verbunden."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Verbinden"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Verbindung trennen"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Die Verbindung konfigurieren"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetverbindung und -einrichtung"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Wir werden nun die Verbindung „%s“ konfigurieren."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Wir werden nun die Verbindung „%s“ konfigurieren.\n"
-"\n"
-"\n"
-"Wählen Sie „OK“, um fortzufahren."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da Sie eine Netzwerkinstallation durchfĂźhren, ist Ihr Netzwerk bereits\n"
-"konfiguriert. Wählen Sie „OK“, um diese Einstellung beizubehalten oder\n"
-"„Abbruch“, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
-"konfigurieren.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Willkommen zum Netzwerk Konfigurationsassistent.\n"
-"\n"
-"Ich versuche nun Ihre Internet-/Netzwerk-Verbindung zu konfigurieren.\n"
-"Falls Sie keine Autodetektion wĂźnschen, entfernen Sie bitte die Markierung.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Wählen Sie das Profil, dass eingestellt werden soll"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Autoerkennung benutzen"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Geräteerkennung..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normale Modem Verbindung"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "an Prot %s gefunden"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN Verbindung"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s gefunden"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL Verbindung"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "an Schnittstelle %s gefunden"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kabel Verbindung"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kabel Verbindung gefunden"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN Verbindung"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "Netzwerkkarte(n) gefunden"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Wählen Sie die Verbindung, die Sie konfigurieren wollen"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Sie haben verschiedene Varianten eingerichtet, sich mit dem\n"
-"Internet zu verbinden. Bitte wählen Sie, welche Verbindungsart\n"
-"ich versuchen soll.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet-Verbindung"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "MĂśchten Sie die Verbindung bei Betriebssystemstart herstellen?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Netzwerk Konfiguration"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Das Netzwerk muss neu gestartet werden"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Beim Neustart des Netzwerks trat ein Fehler auf: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Herzlichen GlĂźckwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
-"\n"
-"Die Konfiguration wird nun in Ihr System integriert.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Es ist sehr empfehlenswert, im Anschluss Ihre X-Oberfläche\n"
-"neu zu starten, um Probleme, die durch die Änderung des\n"
-"Rechnernamens hervorgerufen werden, zu vermeiden."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Während der Konfiguration traten Fehler auf.\n"
-"Kontrollieren Sie Ihre Verbindung mit „net_monitor“ oder dem Mandrake "
-"Kontrollzentrum. Falls die Verbindung nicht funktioniert, sollten Sie erneut "
-"die Konfguration starten."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"WARNUNG: Dieses Gerät wurde bereits zum Herstellen einer Internetverbindung "
-"konfiguriert.\n"
-"Drücken Sie einfach „OK“, um die Einstellungen zu behalten.\n"
-"Fall Sie Felder verändern, wird die Konfiguration ßberschrieben."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bitte geben Sie die IP Parameter dieser Maschine ein.\n"
-"Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
-"angegeben werden (etwa „192.168.1.42“)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigurieren der Netzwerkkarte %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (Treiber %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP Adresse"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netzmaske"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatische IP-Adressen Zuweisung"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Ihr Rechnername sollte auch die Domain beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“.\n"
-"Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS-Server"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (etwa %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway Gerät"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxies einstellen"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP Proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP Proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Netzwerkkarten-ID Ăźberwachen (sinnvoll fĂźr Laptops)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy muss „http://...“ sein"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy muss „ftp://...“ sein"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internet Konfiguration"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "MĂśchten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Ich teste gerade Ihre Verbindung..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sie sind jetzt mit dem Internet verbunden."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Aus SicherheitsgrĂźnden wird die Verbindung nun unterbrochen."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sie sind momentan nicht mit dem Internet verbunden.\n"
-"Versuchen Sie Ihre Internetverbindung wieder zu konfigurieren."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Verbindungskonfiguration"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-"Bitte fĂźllen Sie die folgen Felder aus \n"
-"bzw. makieren Sie die korrekten Angaben"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Karten IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Karten Mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Karten E/A"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Karten IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Karten IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Ihre eigene Telefonnummer"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Name des Providers (z.B. provider.net) "
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonnummer des Providers"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Erster DNS des Providers (optional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Zweiter DNS des Providers (optional)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Land auswählen"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Wahlmodus"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Verbindungsgeschwindigkeit"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "VerbindungsTimeout (in Sec)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kennzeichen (Login)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Passwort"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "Fehler beim Einhängen: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Diese Rechnerarchitektur kennt keine erweiterten Partitionen"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Sie haben einen unbenutzten Bereich in Ihrer Partitionstabelle, \n"
-"den ich nicht ansprechen kann. Die einzige LĂśsung ist, dass Sie \n"
-"Ihre primären Partitionen so verschieben, dass der Bereich direkt \n"
-"neben der erweiterten Partition zu liegen kommt."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurieren aus der Datei %s schlug Fehl: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Fehlerhafte Backup-Datei"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fehler beim Schreiben in Datei %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Mit Ihrer Platte stimmt etwas nicht!\n"
-"Der vorgenommene Integritätstest schlug Fehl.\n"
-"Das bedeutet, dass jeder Schreibvorgang auf der Platte zu einem \n"
-"unvorhersagbaren Ergebnis fĂźhren wird."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "unbedingt notwendig"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "wichtig"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "sehr angenehm"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "angenehm"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "eventuell"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokaler Drucker"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Entfernter Drucker"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Drucker an CUPS-Server auf der Gegenseite"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Drucker an lpd-Server auf der Gegenseite"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Netzwerkdrucker (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Drucker an SMB/Windows 9x/ME/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Drucker an NetWare Server"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Druckeranschluss URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Den Auftrag an ein Kommando weiterleiten"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Unbekanntes Modell"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Lokale Drucker"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Entfernte Drucker"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " an Parallelport \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB-Drucker \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", Multifunktionsgerät am Parallelport \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", USB Multifunktionsgerät"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", Multifunktionsgerät am HP JedDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", Multifunktionsgerät"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", drucken auf %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "auf LDP-Server „%s“, Drucker „%s“"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP Drucker „%s“, Port %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "auf Windows-Server „%s“, Freigabe „%s“"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "auf dem Novell-Server „%s“, Drucker „%s“"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", mittels Kommando „%s“"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Rohdaten-Drucker (kein Treiber)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(an %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(an diesem Rechner)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Auf CUPS-Server „%s“"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Wählen Sie die Drucker-Anbindung"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Wie ist der Drucker mit Ihrem Rechner verbunden?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Falls auf der Gegenseite ein CUPS-Server läuft, mßssen Sie\n"
-"hier keine Einstellungen vornehmen, die Drucker werden \n"
-"automatisch erkannt und Ăźbernommen."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPS Konfiguration"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "CUPS-Server angeben"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Falls auf der Gegenseite ein CUPS-Server läuft, mßssen Sie\n"
-"hier keine Einstellungen vornehmen; CUPS Server informieren Ihren\n"
-"Rechner Ăźber die von ihnen verwalteten Drucker. Alle Drucker,\n"
-"die Ihr Rechner momentan kennt sind unter „Entfernte Drucker“ aufgeführt.\n"
-"Sollte der entfernte CUPS Server jedoch in einem anderen Subnetz\n"
-"beheimatet sein, mĂźssen Sie mindestens seine IP-Adresse, evtl. auch\n"
-"die Port Nummer angeben. Im lokalen Subnetz kĂśnnen Sie die Felder\n"
-"frei lassen."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalerweise wird CUPS automatisch entsprechend Ihres Netzwerks\n"
-"eingerichtet, damit Sie alle Drucker im lokalen Netzwerk verwenden\n"
-"können. Falls das nicht funktioniert, schalten Sie „Automatische\n"
-"CUPS Konfiguration“ aus und editieren Sie die Datei\n"
-"„/etc/cups/cupsd.conf“ selbst. Vergessen Sie nicht, CUPS anschließend\n"
-"neu zu starten (Befehl: „service cups restart“)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Die IP Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Die Prot Nummer muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-Server-IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatische CUPS Konfiguration"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Geräteerkennung..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test der AnschlĂźsse"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Drucker hinzufĂźgen"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Willkommen zum Druckereinrichtungsassistenten\n"
-"\n"
-"Dieser Assistent hilft Ihnen lokale oder entfernte Drucker so einzurichten, "
-"dass dieser Rechner bzw. andere in Ihrem Netzwerk darauf drucken kĂśnnen.\n"
-"\n"
-"Sie werden nur nach den nĂśtigen Informationen Ăźber den Drucker gefragt, um "
-"Ihnen dann Zugriff auf Treiber, Druckoptionen und Anschlussart zu erhalten."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Lokaler Drucker"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Willkommen zum Druckereinrichtungsassistenten\n"
-"\n"
-"Dieser Assistent hilft Ihnen lokale Drucker einzurichten, dass dieser "
-"Rechner bzw. andere in Ihrem Netzwerk darauf drucken kĂśnnen.\n"
-"\n"
-"Bitte schließen sie Ihre(n) Drucker an, und stellen Sie sicher dass das "
-"Gerät/die Geräte eingeschaltet ist/sind. Betätigen sie die Schaltfläche "
-"„Weiter“, wenn Sie fortfahren möchten bzw. „Abbruch“, wenn Sie jetzt keinen "
-"Drucker einrichten mĂśchten.\n"
-"\n"
-"In seltenen Fällen kann es zum totalen stenenbleien des Rechners fßhren, "
-"wenn Sie eine Drucker-Selbsterkennung durchfĂźhren. Schalten Sie diese "
-"einfach aus, wenn Sie einen Drucker ohne Selbsterkennung durchfĂźhren wollen. "
-"Verwenden Sie den „Expertenmodus“ von PrinterDrake, um einen entfernten "
-"Drucker einzurichten, falls er nicht automatisch aufgefĂźhrt wird."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Drucker-Selbsterkennung"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Herzlichen GlĂźckwunsch, Ihr Drucker ist nun installiert und eingerichtet!\n"
-"\n"
-"Sie können nun mit dem „Drucken“ Befehl Ihrer Anwendungen (meistens im "
-"„Datei“-Menü zu finden) drucken.\n"
-"\n"
-"Falls Sie einen Drucker hinzufĂźgen, entfernen oder umbenennen wollen,\n"
-"oder wenn Sie die Standardeinstellungen wie Papierschacht oder \n"
-"Druckqualität) anpassen wollen, wählen Sie „Drucker“ im „Hardware“\n"
-"Bereich des Mandrake Kontrollzentrums."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Selbsterkennung von Druckern"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"PrinterDrake ist in der Lage Ihre Parallelport- und USB-Drucker selbst\n"
-"zu erkennen und einzurichten. In einigen seltenen Fällen KANN ES JEDOCH\n"
-"ZUM TOTALEN STEHENBLEIBEN DES BETRIEBSSYSTEMS FÜHREN! Verwenden Sie \n"
-"diese Variante also AUF IHR RISIKO!\n"
-"\n"
-"Wollen Sie wirklich, dass PrinterDrake eine Selbsterkennung versucht?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Autoerkennung durchfĂźhren"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Drucker selbst einrichten"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s gefunden"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Drucker an Parallelport \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-Drucker \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Es wurde kein lokaler Drucker erkannt! Um ihn manuell hinzuzufĂźgen geben Sie "
-"einfach einen Geräte- oder Dateinamen in der Eingabezeile an (Parallele "
-"Anschlßsse: /dev/lp0, /dev/lp1, ..., äquivalent zu LPT1:, LPT2:, ...; Erster "
-"USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Sie mßssen einen Geräte- oder Dateinamen eingeben!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Kein Lokaler Drucker erkannt!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Netzwerkdrucker kĂśnnen erst nach der Installation eingerichtet werden. "
-"Wählen Sie „Einstellungen/Hardware/Drucker“ im Mandrake Kontrollzentrum."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Um Netzwerkdrucker zu installieren wäen Sie bitte „Abbruch“, wechseln in den "
-"„Expertenmoduns“ und wählen erneut „Drucker hinzufügen“."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Der folgende Drucker wurde automatisch erkannt, falls es sich nicht um den "
-"Drucker handelt, den Sie einrichten wollen, geben Sie einen Geräte- oder "
-"Dateinamen in der Eingabezeile an."
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Hier eine Liste aller automatisch erkannten Drucker. Bitte wählen Sie den "
-"gewßnschten Drucker oder geben Sie einen Geräte- oder Dateinamen in der "
-"Eingabezeile an."
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Der folgende Drucker wurde automatisch erkannt. Die Einrichtung wird voll "
-"automatisch erfolgen. Sollte Ihr Drucker nicht richtig erkannt worden sein, "
-"oder wollen Sie die Einrichtung selbst vornehmen, wählen Sie „Manuelle "
-"Konfiguration“."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Hier eine Liste aller automatisch erkannten Drucker. Bitte wählen Sie den "
-"gewĂźnschten Drucker. Die Einrichtung wird voll automatisch erfolgen. Sollte "
-"Ihr Drucker nicht richtig erkannt worden sein, oder wollen Sie die "
-"Einrichtung selbst vornehmen, wählen Sie „Manuelle Konfiguration“."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Bitte wählen Sie den Anschluss, an dem der Drucker hängt oder geben Sie "
-"einen Geräte- oder Dateinamen in der Eingabezeile an."
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Bitte wählen Sie den Anschluss, an dem Ihr Drucker hängt."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Parallele Anschlßsse: /dev/lp0, /dev/lp1, ..., äquivalent zu LPT1:, "
-"LPT2:, ..., Erster USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Sie mßssen einen Drucker wählen/ein Gerät eingeben!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuelle Konfiguration"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Ist Ihr Drucker ein Multifunktionsgerät von HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 mit Scanner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installiere das „HPOJ“-Paket ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Geräte untersuchen und HPOJ einrichten ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installiere das „SANE“-Paket ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Scannen mit Ihrem HP-Multifunktionsgerät"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "CUPS den Drucker-Port zugänglich machen ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Lesen der Drucker-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Optionen fĂźr Netzwerk-Druckerspooler"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Um eine entfernte lpd Warteschlange zu verwenden, mĂźssen Sie den "
-"Rechnernamen des Drucker-Servers sowie den Druckernamen auf diesem Server "
-"angeben, an den die Aufträge ßbertragen werden sollen."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Name des entfernten Rechners"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Name des entfernten Druckers"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Der Name des entfernten Rechners fehlt!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Der Name des entfernten Druckers fehlt!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Drucker-Parameter"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Um auf einem SMB-Drucker zu drucken sind folgende Angaben erforderlich: Der "
-"SMB-Rechnername des Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers) und mĂśglicherweise die IP-Adresse, Freigabename "
-"fĂźr den Drucker, auf den Sie zugreifen mĂśchten, sowie entsprechender "
-"Benutzername, Passwort und Arbeitsgruppe."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-Server"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-Server-IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Freigabename"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Arbeitsgruppe"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Sie mĂźssen entweder Den Servernamen oder seine IP-Adresse angeben!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Der Name der Samba-Freigabe fehlt!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Optionen fĂźr NetWare-Drucker"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Um auf einem NetWare-Drucker zu drucken sind folgende Angaben erforderlich: "
-"Name des NetWare-Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers), Name der Drucker-Warteschlange, sowie falls "
-"notwendig, den entsprechenden Benutzernamen samt Passwort."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Drucker-Server"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Name der Druckerwarteschlange"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Der NCP Servername fehlt!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Der NCP Warteschlangen-Name fehlt!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Optionen fĂźr TCP/Socket-Drucker"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Um einen TCP- oder Socket-Drucker verwenden zu kĂśnnen, mĂźssen Sie auf alle "
-"Fälle dessen Rechnernamen, mÜglicherweise auch den Port, angeben. Bei HP "
-"JetDirect Servern ist dies normalerweise die Port-Adresse 9100, bei anderen "
-"Servern kann es eine andere sein. Schauen Sie im Zweifelsfall in die "
-"Unterlagen Ihrer Hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Rechnername des Druckers"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Der Rechnername des Druckers fehlt!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Druckeranschluss URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Sie kĂśnnen hier direkt die URI eines Druckers angeben. Die URI muss den CUPS "
-"bzw. den Foomatic Spezifikationen genĂźgen. Es sei hier noch angemerkt, dass "
-"nicht alle URI-Typen von allen Drucksystemem unterstĂźtzt werden."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Sie mĂźssen eine gĂźltige URI eingeben!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Jeder Drucker benötigt einen Namen (etwa „Drucker“).\n"
-"Beschreibung und Standort mĂźssen nicht ausgefĂźllt werden.\n"
-"Sie dienen nur als Kommentare fĂźr den Anwender."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Druckername"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Beschreibung"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Standort"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Vorbereiten der Drucker-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Ihr Druckermodell"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"PrinterDrake hat den Modellnamen der Selbsterkennung mit den Modellen in der "
-"Datenbank verglichen, um den besten Treiber zu finden. Die Auswahl kann "
-"jedoch falsch sein, etwa wenn Ihr Drucker nicht in der Datenbank vorhanden "
-"ist. Kontrollieren Sie, ob die Wahl korrekt ist und wählen Sie die "
-"Schaltfläche „Das Modell ist richtig“, wenn der Treiber Ihren Wün "
-"entspricht, andernfalls betägen Sie „Modell auswählen“, um die Auswahl "
-"selbst vorzunehmen.\n"
-"\n"
-"Folgender Drucker wurde gefunden:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Das Modell ist richtig"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Modell auswählen"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Auswahl des Druckertyps"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Über welchen Druckertyp verfügen Sie?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Kontrollieren Sie bitte, ob PrinterDrake Ihern Drucker korrekt erkannt hat. "
-"Falls die Markierung auf einem falschen Gerät oder auf „Rohdaten-Drucker“ "
-"steht, suchen Sie bitte selbst Ihren Drucker in der Liste."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Falls Ihr Drucker nicht aufgefßhrt ist wählen Sie bitte ein kompatibles bzw "
-"ähnliches Modell (Fßr Einzelheiten schauen Sie bitte in Ihr Druckerhandbuch)."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI Win-Drucker Konfiguration"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Sie versuchen, eine OKI Win-Laserdrucker einzurichten. Da diese Drucker ein "
-"sehr eigenwilliges Protokol verwenden, funktionieren sie nur, wenn sie am "
-"ersten Parallelport angeschlossen sind. Sollte Ihr Druker an einer anderen "
-"Schnittstelle oder an einer Printserver-Box hängen, schließen Sie ihn bitte "
-"an den ersten Parallelport, bevor Sie versuchen eine Testseite zu drucken ..."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark Tintenstrahl-Konfiguration"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Der Lexmark Tintenstrahl-Druckertriber unterstĂźtzt nur lokale Drucker, keine "
-"Drucker auf entfernten Rechnern oder an Printserver-Boxen. Bitte schließen "
-"Sie den Druker direkt an Ihren Rechner oder richten Sie ihn auf dem Rechner "
-"ein, an den er angeschlossen ist."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Um mit Ihrem Lexmark Tintenstrahldrucker drucken zu kĂśnnen, benĂśtigen Sie "
-"die Treiber, die von Lexmark bereitgestellt werden (http://www.lexmark."
-"com/). Gehen Sie auf die amerikanische Seite und wälen Sie die Schaltfäe "
-"„Drivers“. Wählen Sie dann das Drukermodell und geben Sie „Linux“ als "
-"Bertiebssystem an. Sie erhalten die Treiber als RPM-Paket oder als "
-"Shellskript mit interaktiver Grafikinstallation. Sie mĂźssen die Einrichtung "
-"nicht mit dem Lexmark Klicktool vornehmen. Sie kĂśnnen direkt nach der Lizenz "
-"auf „Abbruch“ drücken. Drucken Sie dann Druckkopf-Einrichtungsseiten mit "
-"„lexmarkmaintain“ und justieren Sie damit den Druckkopf."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standard-Einstellungen des Druckers\n"
-"\n"
-"Sie sollten sicherstellen, dass Papiergröße, Farbangaben, Druckqualität "
-"sowie Informationen zu vorhandenem Speicher, Duplexeinheit und Papierfächern "
-"richtig eingestellt sind. Es sei auch angemerkt, dass häufig mit steigender "
-"Druckqualität die Druckgeschwindigkeit sinkt."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Der Parameter %s ist yu groß oder zu klein!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Möchten Sie diesen Drucker („%s“)\n"
-"als Standarddrucker verwenden?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testseiten"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Bitte wählen Sie, welche Testseiten Sie drucken wollen.\n"
-"\n"
-"Bemerkung: Der Druck der Foto-Testseite dauert häufig extrem lange. Bei "
-"Laserdruckern mit wenig Speicher kann es auch vorkommen, dass sie gar nicht "
-"gedruckt wird. Normalerweise sollte es ausreichen, die Standard-Testseiten "
-"auszudrucken."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Keine Testseiten"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Drucken"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standard-Testseite"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternative Testseite (US-Format - „Letter“)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternative Testseite (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto-Testseite"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Keine Testseite(n) drucken"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Druck der Testseite(n) ..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-"Druckstatus:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "War der Ausdruck korrekt?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Rohdaten-Drucker"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Sie können sowohl den Befehl „%s <datei>“ verwenden, wenn Sie in einer "
-"Konsole die Datei „<datei>“ drucken wollen, als auch ein grafisches "
-"Hilfsprogramm verwenden: „xpp <datei>“ oder „kprinter <datei>“. Die "
-"grafischen Hilfsprogramme erlauben Ihnen auf einfache Weise den richtigen "
-"Drucker zu wählen und die notwendigen Druckerparameter anzugeben.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie können diese Befehle auch in der „Druck-Kommando“-Zeile des Druckdialogs "
-"zahlreicher Anwendungen angeben, lassen Sie jedoch den Dateinamen weg, da "
-"die zu druckende Datei von der Anwendung geliefert wird.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Der Befehl „%s“ erlaubt es Ihnen auch zahlreiche Einstellungen für einen "
-"bestimmten Druckauftrag zu ändern. Geben Sie die gewßnschten Angaben einfach "
-"in der Kommandozeile mit an, etwa: „%s <Datei>“. "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Um alle existierenden Optionen des Druckers zu erfahren, lesen Sie entweder "
-"die unten angegebene Liste oder betätigen Sie die Schaltfläche „Liste der "
-"Drucker-Optionen“. %s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hier die Liste vorhandener Drucker-Parameter des aktuellen Druckers:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Verwenden Sie den Befehl „%s <Datei>“, um die Datei <Datei> in der "
-"Kommandozeile auszudrucken.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie können diesen Befehl auch im „Druckkommando“-Feld vieler Programme "
-"angeben. Tragen Sie bitte keinen Dateinamen ein, da dieser vom Programm "
-"ergänzt wird.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Um eine Liste der Drucker-Parameter Ihres Druckers zu erhalten, betätigen "
-"Sie bitte die Schaltfläche „Liste der Drucker-Optionen“."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Verwenden Sie einen der Befehle „%s <Datei>“ oder „%s <Datei>“, um die Datei "
-"<Datei> in der Kommandozeile auszudrucken.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Sie können auch das Grafikwerkzeug „xpdq“ zum setzen der Optionen und "
-"Verwalten der Druckjobs verwenden.\n"
-"Falls Sie KDE als Arbeitsoberfläche nutzen, haben Sie eine Panik-Abschaltung "
-"in Forma des Arbeitsflächensymbols „STOP Printer!“, dass sofort alle "
-"Druckaufträge anhä, wenn Sie es betägen. Das kann beispielsweise dann "
-"hilfreich sein, wenn Sie einen Papierstau in Ihrem Drucker haben.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Die Befehle „%s“ und „%s“ erlauben es Ihnen ebenfals die Optionen eines "
-"spezeiellen Druckjobs zu konfigurieren. FĂźgen Sie einfach die gewĂźnschten "
-"Einstellungen in der Kommandozeile ein, etwa „%s <Datei>“.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Schließen"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Drucken/Scannen mit „%s“"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Drucken auf Drucker „%s“"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Liste der Drucker-Optionen"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Ihr HP-Multifunktionsgerät wurde automatisch auch zum Scannen eingerichtet. "
-"Sie können nun mit „scanimage“ („scanimage -d hp:%s“ um den Scanner "
-"auszuwählen, falls Sie mehrere angeschlossen haben) aus der Kommandozeile "
-"oder mit „xscanimage“ bzw. „xsane“ - wenn Sie eine grafisches Werkzeug "
-"verwenden wollen - scannen. Wenn sie mit dem GIMP arbeiten wollen, kĂśnnen "
-"Sie dies ebenfalls tun. Wählen Sie einfach im Menü „Datei/Holen“ den "
-"entsprechenden Eintrag. Sie können sich auch mittels „man scanimage“ bzw "
-"„man sane-hp“ in der Kommandozeile weitere Informationen ausgeben lassen.\n"
-"\n"
-"Verwenden Sie für dieses Gerät nicht „ScannerDrake“!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Ihr HP-Multifunktionsgerät wurde automatisch auch zum Scannen eingerichtet. "
-"Sie können nun in der Kommandozeile mittels „ptal-hp %s scan ...“ scannen. "
-"Zur Zeit existieren leider keine grafischen Werkzeuge, mit deren Hilfe Sie "
-"Scannen kÜnnen - Ihr Multifunktionsgerät wird noch nicht unterstßtzt. "
-"Weitetre Informationen finden Sie in der Datei „/usr/share/doc/hpoj-0.8/ptal-"
-"hp-scan.html“ auf Ihrem Rechner. Falls Sie einen HP LaserJet 1100 oder 1200 "
-"haben, kĂśnnen Sie nur scannen, wenn Sie die Scanner-Option installiert "
-"haben.\n"
-"\n"
-"Verwenden Sie für dieses Gerät nicht „ScannerDrake“!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Lesen der Treiber-Datenbank ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Drucker-Einstellung transferieren"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Sie können die Druckerkonfiguration, die Sie für den Spooler „%s“ "
-"vorgenommen haben für „%s“, ihren aktuellen Spooler, verwenden. Alle Daten "
-"(Name, Beschreibung, Standort, Verbindungsart und standard "
-"Optionseinstellungen) werden Ăźbernommen, Druckjobs in der alten "
-"Warteschlange gehen jedoch verloren.\n"
-"Nicht alle Warteschlangen kĂśnnen Ăźbernommen werden:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS unterstĂźtzt keine Druker an Novel Servern oder Drucker, die ihre Daten "
-"in ein frei gewähltes Kommando senden.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ unterstĂźtzt nur lokale Drucker, entfernte LPD Drucker und Socket/TCP "
-"Drucker.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD und LPRng unterstĂźkeine IPP Drucker.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Warteschlangen, die nicht mit diesem Programm oder „foomatic-configure“ "
-"ertellt wurden, kĂśnnen nicht Ăźbertragen werden."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Drucker, die mit den PPD-Dateien ihrer Hersteller oder CUPS-spezifischen "
-"Treibern eingerichtet wurden, kĂśnnen nicht Ăźbertragen werden."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markieren Sie die Druckerwarteschlangen, die sie Ăźbertragen wollen und "
-"betätigen Sie die Schaltfläche „Übertragen“."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Druckerdaten nicht Ăźbertragen"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Übertragen"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Es existiert bereits ein Drucker mit Namen „%s“ unter %s.\n"
-"Durch betätigen der Schaltfäche „Übertragen“ können Sie ihn\n"
-"Ăźberschreiben. Sie kĂśnnen dem Drucker auch einen neuen \n"
-"Namen geben oder ihn einfach Ăźberspringen."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Druckernamen sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Der Drucker „%s“ existiert bereits. Wollen Sie ihn wirklich \n"
-"ersetzen?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Neuer Druckername"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Übertragen von „%s“ ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Sie haben Ihren alten Standarddrucker („%s“) übertragen, soll es auch Ihr "
-"Standarddrucker unter dem neuen Drucksystem „%s“ werden?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Aktualisieren der Druckerdaten ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Konfiguration eines entfernten Druckers"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Netzwerk starten ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Netzwerk jetzt konfigurieren"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Ihr Netzwerk ist nicht konfiguriert"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Sie wollen einen entfernten Drucker einrichten. Sie benĂśtigen dafĂźr ein "
-"funktionerendes Netzwerk, aber Ihr Netzwerk ist noch nicht eingerichtet. "
-"Sollten Sie dennoch fortfahren, ohne Ihr Netzwerk einzurichten, ist der "
-"Drucker hinterher nicht zu verwenden. Wie wollen Sie fortfahren?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Weiter ohne Netzwerkkonfiguration"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Das von Ihnen während der Installation eingerichtete Netzwerk kann jetzt "
-"nicht gestartet werden. Testen Sie bitte, ob es nach einem Neustart zur "
-"VerfĂźgung steht. Falls nicht, berichtigen Sie die Einstellungen im Mandrake "
-"Kontrollzentrum unter „Netzwerk & Internet/Verbindung“. Versuchen Sie "
-"anschließend erneut den Drucker mittels „Hardware/Drucker“im Kontrollzentrum "
-"einzurichten."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Es wurde kein aktives Netzwerk gefunden und es konnte auch keine "
-"Netzwerkverbindung hergestellt werden. Kontrollieren Sie bitte Ihre Hardware "
-"und Ihre Softwareeinstellngen. Versuchen Sie anschließend erneut den "
-"entfernten Drucker einzurichten."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Drucksystem neu starten ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "Hoch"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Paranoid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installation eines Drucksystems in Sicherheitsebene %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sie sind dabei das Drucksystem %s auf einem Rechner mit Sicherheitsebene %s "
-"zu installieren.\n"
-"\n"
-"Dieses Drucksystem läuft als Dämon (Hintergrundprozess), der auf "
-"Druckaufträge wartet, um sie abzuarbeiten. Da der Dämon auch fßr andere "
-"Rechner Ihres Netzwerks erreichbar ist,schaffen Sie damit einen mĂśglichen "
-"Angriffspunkt. Aus SicherheitsgrĂźnden werden in dieser Sicherheitsebene "
-"standardmäßig nur einige ausgewählte Dämons gestartet.\n"
-"\n"
-"Wollen Sie wirklich dieses Drucksystem auf diesem Rechner installieren?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Drucksystem beim BS-Start aktivieren"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Das Drucksystem (%s) wird nicht automatisch beim Betriebssystemstart "
-"aktiviert.\n"
-"Es ist mĂśglich, dass der Start durch den Wechsel in eine hĂśhere "
-"Sicherheitsebene deaktiviert wurde, da das Drucksystem einen potentienllen "
-"Angriffspunkt darstellt.\n"
-"\n"
-"Wollen sie den automatischen Start des Drucksystems wieder herstellen?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Suche nach installierter Software"
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Entfernen von LPRng ..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Entfernen des LPD ..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Wählen Sie das Drucksystem"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welches Drucksystem (Spooler) wollen Sie verwenden?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfigurieren von Drucker „%s“ ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installieren des Pakets Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Drucker-Optionen"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake vorbereiten ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Anwendungen konfigurieren ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "MĂśchten Sie einen Drucker konfigurieren?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Drucksystem: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Die folgenden Drucker sind bereits eingerichtet. FĂźhren Sie einen "
-"Doppelklick auf einem aus, um ihn zu ändern, als Standarddrucker zu "
-"verwenden, Informtionen Ăźber ihn zu erhalten oder einen entfernten CUPS-"
-"Server fßr Star/OpenOffice zugänglich zu machen."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Die folgenden Drucker sind bereits eingerichtet. FĂźhren Sie einen "
-"Doppelklick auf einem aus, um ihn zu ändern, als Standarddrucker zu "
-"verwenden oder Informtionen Ăźber ihn zu erhalten."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Aktualisiere Druckerliste (um alle entfernten CUPS-Drucker anzuzeigen)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Drucksystem ändern"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normaler Modus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "MĂśchten Sie einen weiteren Drucker einrichten?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Drucker-Konfiguration ändern"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drucker %s\n"
-"Was wollen Sie an diesem Drucker ändern?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "AusfĂźhren!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Art der Druckeranbindung"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Druckername, Beschreibung, Standort"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Druckerproduzent, Modell, Treiber"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Druckerproduzent, Modell"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Als Standarddrucker verwenden"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Diesen Drucker fĂźr StarOffice/OpenOffice.org hinzufĂźgen"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Diesen Drucker fĂźr StarOffice/OpenOffice.org entfernen"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Testseite(n) drucken"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Wie dieser Drucker genutzt werden kann"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Drucker entfernen"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Alten Drucker „%s“ entfernen ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Standarddrucker"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Der Drucker „%s“ ist jetzt Ihr Standarddrucker“"
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Drucker fĂźr StarOffice/OpenOffice.org hinzufĂźgen"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"Der Drucker „%s“ wurde erfogrich zu StarOffice/OpenOffice.org hinzugefügt."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Fehler beim Hinzufügen von „%s“ für StarOffice/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Drucker fĂźr StarOffice/OpenOffice.org entfernen"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"Der Drucker „%s“ wurde erfogrich für StarOffice/OpenOffice.org entfernt."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Fehler beim Entfernen von „%s“ für StarOffice/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Möchten Sie den Drucker „%s“ wirklich entfernen?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Drucker „%s“ entfernen ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxies einstellen"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Herzlich willkommen zum Proxy Konfigurationsassistenten.\n"
-"\n"
-"Hier kĂśnnen Sie Ihre HTTP und FTP Proxies mit oder ohne\n"
-"Anmeldung und Passwortabfrage einrichten\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Bitte fĂźllen Sie die HTTP Proxy Informationen aus\n"
-"Falls sie keinen HTTP Proxy wolen, lassen Sie einfach\n"
-"alle Felder leer."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Die URL muss mit „http:“ beginnen"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Die Prot Nummer muss eine Zahl sein!"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Bitte fĂźllen Sie die FTP Proxy Informationen aus\n"
-"Falls sie keinen FTP Proxy wolen, lassen Sie einfach\n"
-"alle Felder leer."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Die URL muss mit „ftp:“ beginnen"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Bitte geben Sie - falls nĂśtig - Kennzeichen und Passwort fĂźr den Proxy \n"
-"an. Lassen Sie die Felder leer, falls Sie sie kein Kennzeichen/Passwort \n"
-"wollen."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Kennzeichen"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Passwort"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Passwort (erneut)"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Die PasswĂśrter stimmen nicht Ăźberein. Bitte versuchen Sie es eneut!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ich kann keine Partition zu dem _formatierten_ RAID md%d hinzufĂźgen"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ich kann Datei „%s“ nicht schreiben"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid schlug Fehl"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid schlug Fehl (MĂśglicherweise fehlen die RAID-Tools)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nicht genĂźgend Partitionen fĂźr RAID Level %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startet das ALSA (Advanced Linux Sound Architecture) Sound System"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Mit dem Dienst anacron kĂśnnen cron-Prozesse auch zu anderen als den \n"
-"vorgegebenen Zeiten gestartet werden. Dies ist vor Allem dann \n"
-"sinnvoll, wenn Ihr Rechner nicht rund um die Uhr läuft, da sonst \n"
-"Prozesse, die etwa zwischen Mitternacht und 6:00 Uhr gestartet \n"
-"werden sollten, nie ausgefĂźhrt wĂźrden."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Der APM-Dienst (apmd) wird von Laptops verwendet, um den Ladestatus \n"
-"der Batterie durch den Syslog-Dienst erfassen zu lassen. Mit seiner \n"
-"Hilfe kann man den Rechner auch rechtzeitig herunterfahren lassen, \n"
-"bevor die Batterien leer sind."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Dieser Dienst startet Applikationen der at-Warteschlange wenn der \n"
-"dafßr vorgesehene Zeitpunkt erreicht ist. Lässt die Systemauslastung \n"
-"es zu, werden sog. Batch-Anwendungen gestartet."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Der Befehl cron wird unter UNIX/Linux dazu verwendet, Benutzerprogramme \n"
-"zu vordefinierten regelmäßigen Zeiten abzuarbeiten. \n"
-"Der Dienst vixie cron erweitert dieses Konzept um weitere Funktionen, etwa \n"
-"ein verbessertes Sicherheitskonzept und einfachere Konfiguration."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Der GPM-Dienst stellt Ihnen MausunterstĂźtzung auf Text-Konsolen zur \n"
-"VerfĂźgung. Sie erhalten damit die MĂśglichkeit Ausschneiden und \n"
-"EinfĂźgen von Text wie unter X zu verwenden. In einigen Applikationen \n"
-"kĂśnnen Sie auch Pop-Up-MenĂźs damit bedienen."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake fĂźhrt Hardwaretests durch, und konfiguriert (falls nĂśtig) \n"
-"neue/geänderte Hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ist ein World-Wide-Web-Server. Mit seiner Hilfe kĂśnnen Sie \n"
-"HTML-Dateien ßber HTTP publizieren. Der Server ist CGI-fähig."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Der Internet Superserver-Dienst (inetd) startet je nach Bedarf \n"
-"etliche andere Internet-Dienste, so etwa telnet, ftp, rsh oder \n"
-"rlogin. Dies jedoch nur, wenn die entsprechenden Dienste in der \n"
-"Datei „/etc/inetd.conf“ freigeschaltet sind. \n"
-"Schalten Sie diesen Dienst ab, kĂśnnen Sie keine der von inetd \n"
-"verwalteten Dienste mehr zugreifen."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Startet Paketfilterung fĂźr Linux 2.2er Kerne, um Ihren Rechner \n"
-"durch eine Firewall vor Angriffen aus dem Netz zu schĂźtzen."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dieser Dienst lädt die Tastaturbelegung, die in der Datei \n"
-"„/etc/sysconfig/keyboard“ angegeben ist. Mittels „kbdconfig“ \n"
-"kÜnnen Sie diese Einstellung ändern. Schalten Sie diesen Dienst ab, \n"
-"mßssen Sie ab dem nächsten Systemstart mit der amerikanischen \n"
-"Tastatur vorlieb nehmen."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatische Neuerstellung der Kern-Header in /boot fĂźr\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automatische Erkennung und Konfiguration neuer Hardware während des \n"
-"Betriebssystemstarts."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf versucht beim Betriebssystemstart einige Verwaltungsaufgaben \n"
-"auszufĂźhren."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Der Dienst lpd ist der Drucker-Server Ihres Rechners. Wenn Sie \n"
-"diesen Dienst abschalten werden Druckaufträge nicht mehr abgearbeitet.\n"
-"Hauptaufgabe von lpd ist es, Druckaufträge an den jeweiligen \n"
-"zuständigen Drucker (dieser kann auch einen anderen Rechner hängen) \n"
-"zu senden."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Der Linux Virtual Server kann verwendet werden, um um ein \n"
-"hochperformanten HochverfĂźgbarkeitsserver aufzusetzen."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Der Dienst named (BIND) stellt ihnen einen Server zur VerfĂźgung, \n"
-"mit dessen Hilfe Rechnernamen in IP-Adressen umgesetzt werden. \n"
-"Ein solcher Dienst wird „Domain Name Server“ (DNS) genannt. \n"
-"Falls Sie nur einen Rechner besitzen, mit dem Sie per Modem/ISDN ins \n"
-"Netz gehen, benĂśtigen Sie diesen Dienst nicht."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Dieser Dienst ist verantwortlich dafĂźr, dass alle Netzwerk-Dateisysteme \n"
-"(NFS) bei Systemstart eingehängt werden, etwa SMB (Lan Manager/Windows) \n"
-"und NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Dieser Dienst aktiviert Netzwerkgeräte (etwa Netzwerkkarten), die \n"
-"so konfiguriert wurden, dass sie ab dem Systemstart zur VerfĂźgung \n"
-"stehen sollen."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu kĂśnnen. \n"
-"Dieser Dienst stellt Ihnen einen solchen Server zur VerfĂźgung. \n"
-"Konfiguriert wird er in der Datei „/etc/exports“."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu kĂśnnen. \n"
-"Der Dienst nfslock stellt Ihnen hierfĂźr Locking-Mechanismen zur \n"
-"VerfĂźgung, damit eine Datei nicht durch mehrere Personen \n"
-"gleichzeitig verändert werden kann."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Schaltet beim Betriebssystemstart automatisch die „Num“-Taste für \n"
-"die virtuellen Konsolen und XFree ein."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "UnterstĂźtzung fĂźr den OKI 4w und kompatible WinDrucker."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA wird normalerweise in Laptops verwendet, um Ethernet-Karten \n"
-"oder Modems verwenden zu kĂśnnen. Dieser Dienst wird nur gestartet, \n"
-"wenn Sie ihn vorher konfiguriert haben. Daher schadet es nicht, \n"
-"wenn Sie ihn auf Rechnern aktivieren, auf denen er nutzlos ist."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mittels portmapper werden RPC-Verbindungen verwaltet, die etwa von \n"
-"den Protokollen NFS und NIS verwendet werden. Auf Rechnern, die \n"
-"solche Server (RPC-basierte) beherbergen, muss dieser Dienst \n"
-"aktiviert sein."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ist ein E-Mail Transport-Dienst. Mit seiner Hilfe werden \n"
-"E-Mails zwischen verschiedenen Rechnern weitergeleitet."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Dieser Dienst speichert beim Herunterfahren des Rechners den Zustand \n"
-"des Zufallszahlengenerators, um ihn beim nächsten Systemstart \n"
-"wieder zu restaurieren. Die Qualität erzeugter Zufallszahlen \n"
-"wird dadurch verbessert."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Weist Roh-Geräten ein blockorientiertes Gerät (etwa eine\n"
-"Festplattenpartition) zu. Dies wird fĂźr Anwendungen wie\n"
-"etwa ORACLE benĂśtigt"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Der Dienst routed ermĂśglicht ein automatisches Aktualisieren der \n"
-"IP-Routing-Tabellen mittels RIP Protokoll. Zwar wird RIP in kleinen \n"
-"Netzwerken verwendet, jedoch wird fĂźr komplexere Netzwerke ein \n"
-"anderer Dienst benĂśtigt."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Der Dienst rstat ermĂśglicht es Anwendern anderer Rechner des \n"
-"Netzwerks Preformance-Daten dieses Rechners zu erhalten."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Der Dienst rusers ermĂśglicht es Anwendern anderer Rechner \n"
-"herauszubekommen, welche Benutzerkennzeichen auf diesem Rechner \n"
-"gerade angemeldet sind."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Der Dienst rwho erlaubt es Benutzern entfernter Rechner eine Liste\n"
-"momentan angemeldeter Benutzerkennzeichen Ăźbermittelt zu bekommen \n"
-"(ähnlich wie finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Starten des Sound-Systems Ihres Rechners"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Mittels Syslog versuchen zahlreiche Dienste Verlaufsprotokolle \n"
-"in vorgesehene Dateien zu sichern. Es ist sinnvoll Syslog immer \n"
-"aktiviert zu haben."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Lädt die Treiber fßr Ihre USB-Geräte."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Dieser Dienst startet den X-Font-Server. Er ist notwendig, \n"
-"damit XFree gestartet werden kann!"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Wählen Sie, welche Dienste\n"
-"automatisch beim Systemstart\n"
-"aktiviert werden sollen"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Drucken"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Gemeinsamer Dateizugriff"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "System"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Fernwartung"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Datenbankserver"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Dienste: %d aktiviert von %d registrierten."
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "aktiv"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "gestoppt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Dienste und Dämonen"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Es existieren leider keine\n"
-"weiteren Informationen zu\n"
-"diesem Dienst."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Bei BS-Start"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Start"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Stopp"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Danke, dass Sie sich fĂźr Mandrake Linux 8.2 entschieden haben"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Willkommen in der Open Source Welt."
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Der Erfolg von MandrakeSoft basiert auf dem Prinzip freier Software. Ihr "
-"neues Betriebssystem ist das Ergebnis einer weltweiten Zusammenarbeit der "
-"GNU/Linux-Gemeinde."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Betreten Sie die Welt der Freien Software"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Wollen Sie die Open Source Gemeinde kennen lernen? Ein Teil von ihr werden? "
-"Beteiligen Sie sich an den Diskussionsforen, die Sie auf unseren „Community“-"
-"Seiten finden."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet und Messaging"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 stellt Ihnen die beste Softwareauswahl bereit, um auf "
-"alles, was das Internet bietet, zugreifen zu kĂśnnen. Surfen Sie im Web mit "
-"Mozilla oder Konqueror, bearbeiten Sie E-Mails und verwalten Sie persĂśnliche "
-"Informationen mit Evolution, KMail oder zahlreichen anderen Programmen."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia und Grafik"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2 reizt Ihren Multimediarechner voll aus! Verwenden Sie die "
-"neuste Software, um Audiodateien abzuspielen, Ihre Fotos und Bilder zu "
-"bearbeiten sowie Videos abzuspielen..."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Entwicklungsplattform"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 ist die ultimative Entwicklungsplattform. Nutzen Sie die "
-"volle Power des GNU C Compilers sowie der besten Open Source "
-"Entwicklungsumgebungen."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Kontrollzentrum"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Das Mandrake Linux 8.2 Kontrollzentrum ist der zentrale Ort, an dem Sie Ihr "
-"System nach Ihren WĂźnschen anpassen kĂśnnen."
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Arbeitsumgebungen"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 bietet 11 verschiedene grafische Arbeitsumgebungen und "
-"Windowmanager. Darunter GNOME 1.4, KDE 2.2.2 und Window Maker 0.8"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Server Software"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Verwandeln Sie Ihren Rechner mit ein paar Mausklicks in einen "
-"leistungsfähigen Server: Web, E-Mail, Firewall, Router, Datei- und "
-"Druckserver, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Spiele"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 bietet die besten Open Source Spiele - Arcade, Baller, "
-"Karten, Sport, Strategie, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Sie wollen GNU/Linux in eine einfache, schnelle und vor Allem freie Weise "
-"erlernen? MandrakeSoft bieten ein freies Linux Training sowie einen Weg "
-"Ihren Fortschirtt mit unserem Online Trainingcenter „MandrakeCampus“ zu "
-"testen."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Qualitativ hochwertiger Support aus der GNU/Linux Gemeinde und von "
-"MandrakeSoft ist nur einen Mausklick weit entfernt. Sind Sie bereits ein "
-"„alter Hase“ in Sachen GNU/Linux, werden Sie ein Experte, und teilen Sie Ihr "
-"Wissen mit Anderen auf unserer Support-Seite."
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Unsere Consultants sind bereit, Ihnen fĂźr alle Ihre IT-Projekte individuelle "
-"LĂśsungen anzubieten, die genau Ihren BedĂźrfnissen entsprechen. MandrakeSoft "
-"als erfahrener Linux-Distributor bietet eine echte IT-Alternative fĂźr Ihr "
-"Unternehmen."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Unsere Linux KomplettlĂśsungen, Sonderangebote und Mandrake Fan-Artikel "
-"bekommen Sie in unserem E-Shop"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Weitere Informationen Ăźber MandrakeSofts professionelle Dienstleistungs- und "
-"gewerbliche Angebote erhalten Sie unter:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact/"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Pakete Installieren ..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ich kann Ihre Partitionstabelle nicht lesen, sie ist fehlerhaft :-(\n"
-"Um fortfahren zu kĂśnnen setze ich die fehlerhaften Partitionen zurĂźck"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Fehler!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ich kann die benötigte Abbild-Datei „%s“ nicht finden."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Auto-Installationskonfigurator"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Sie sind dabei, eine Auto-Installationsdiskette zu erstellen. Diese\n"
-"MÜglichkeit ist gefährlich und sollte mit Vorsicht verwendet werden!\n"
-"\n"
-"Sie kĂśnnen mit diesem Werkzeug die Installation, die Sie auf Ihrem\n"
-"Rechner erneut durchspielen, wobei Sie an einigen Stellen interaktiv\n"
-"Einfluss nehmen zu kĂśnnen.\n"
-"\n"
-"Aus SicherheitsgrĂźnden wird die Partitionierung und Formatierung nie\n"
-"automatisch durchgefĂźhrt.\n"
-"\n"
-"Wollen Sie fortfahren?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automatische Konfiguration der Schritte"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Bitte wählen Sie fßr jeden Schritt, ob er wie bei Ihrer Installation "
-"vorgenommen werden soll, oder ob Sie ihn manuell durchfĂźhren wollen."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Willkommen.\n"
-"\n"
-"Die Parameter der Autoinstallation sind in den Abschnitten rechts verfĂźgbar."
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratuliere!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die Diskette wurde erfolgreich erstellt.\n"
-"Sie kĂśnnen die Installation nun automatisch durchfĂźhren."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Auto-Installation"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Eintrag hinzufĂźgen"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Letzten Eintrag entfernen?"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup Dämon Report\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "Vortschritt"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Systemdateien sichern ..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Backup-Dateien auf der Festplatte ..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Benutzerdateien sichern ..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Festplattenbackup in Bearbeitung ..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Andere Dateien sichern ..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"Dateiliste per FTP senden: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP Verbindungsprobleme: Es war nicht mĂśglich, Ihre Dateien per FTP zu "
-"Ăźbertragen.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Fehler beim Verschicken der Mail. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Dateiauswahl"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-"Wählen Sie die Dateien oder Verzeichnisse und betätigen Sie die Schaltfläche "
-"„Hinzufügen“"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Bitte wählen Sie alle benÜtigten Parameter.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Diese Optionen kön alle Ihre Dateien im Verzeichnis „/etc“ sichern und "
-"wiederherstellen\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sichern Ihrer Systemdateien (Verzeicnis „/etc“)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Inkrementelles Backup (alte Backups nicht Ăźberschreiben)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Keine kritischen Dateien (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Mit dieser Option sind Sie in der Lage, jede Version Ihres \n"
-"„/etc“ Verzeichnisses wiederherzustellen."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Bitte wählen Sie alle Kennzeichen, deren Dateinen mitgesichert werden sollen."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Die Browser-Caches nicht archivieren."
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Markierte entfernen"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Benutzer"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "FTP-Verbindung zum erstellen der Sicherungskopien verwenden"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Rechnernamen oder IP eingeben."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Bitte geben Sie das Verzeichnis an,\n"
-" in dem die Archive erstellt werden sollen."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Bitte geben Sie Ihr Benutzerkennzeichen ein"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Bitte geben Sie Ihr Passwort ein"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Passwort behalten"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP Verbindung"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Sichere Verbindung"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Sicherungskopie auf CD/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Bitte wählen Sie Ihren CD-Paltz"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Kontrollieren Sie, ob Sie ein CDRW-Medium verwenden."
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Kontrollieren Sie, ob Sie die CDRW vorher lĂśschen wollen."
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Bitte markieren, falls Sie \n"
-"„install boot“ auf Ihrer CD haben wollen."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Bitte geben Sie den Gerätenamen \n"
-"Ihres Brenners an, etwa „0,1,0“."
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Auf Bandlaufwerk sichern"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Bitte geben Sie den Gerätenamen fß Archivierung an."
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Bitte geben Sie die Maximalgröße \n"
-"fĂźr DrakBackup an."
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Bitte geben Sie das Archivverzeichnis an:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Quota fĂźr Backup-Datei verwenden."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Netzwerk"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM/DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Festplatte/NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "stĂźndlich"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "täglich"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "wĂśchendlich"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "monatlich"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Dämon verwenden"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Bitte wählen Sie das Zeitintervall \n"
-"zwischen zwei Sicherungen."
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Bitte wählen Sie ein\n"
-"Sicherungsmedium."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Festplatte mit Dämin verwenden"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "FTP mit Dämon verwenden"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Stellen Sie sicher, dass der Cron-Dämon als Dienst aktiviert ist."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "E-Mail Bericht nach jedem Sicherungsvorgang an: "
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Was"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Wo"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Wann"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Mehr Parameter"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "DrakBackup Konfiguration"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Bitte wählen Sie wohin Sie die Sicherungskopien machen wollen."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "auf Festplatte"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "Ăźber Netzwerk"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Bitte wählen Sie, was Sie sichern wollen"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "System sichern"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Benutzerkennzeichen sichern"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Benutzerkennzeichen auswählen"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sicherungsquellen: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systemdateien:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Benutzerdateien:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Sonstige Dateien:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Auf Festplatte sichern unter: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Via FTP sichern auf: %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t Benutzer: %s\n"
-"\t\t Pfad: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Optionen:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tKeine Systemdateien\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSicherungen verwenden „tar“ und „bzip2“\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSicherungen verwenden „tar“ und „gzip“\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Dämon (%s) enthält:\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t- Festplatte.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t- CD-ROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t- Netzwerk per FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t- Netzwerk per SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Keine Konfiguration. Wählen Sie dein Assistenten oder Fortgeschritten.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste der wiederherzustellenden Daten:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste der beschädigten Daten:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Bitte entfernen Sie die Markierung oder lÜschen Sie sie das nächste Mal."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Die Sicherungen sind beschädigt."
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr " Alle Ihre gewälhten Daten wurden "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " erfolgreich auf %s wiederhergestellt "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr " Konfiguration wiederherstellen "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK, die Ăźbrigen Dateien zu aktualisieren."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Liste wiederherzustellender Kennzeichen (letztes Datum per Kennzeichen ist "
-"wichtig)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Systemdateien sichern vor:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Bitte wählen Sie, welches Datum wiederhergestellt werden soll."
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Auf Festpaltte sichern"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Von Festplatte wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Bitte geben Sie das Verzeichnis an, in dem die Sicherungskopien liegen"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Wählen Sie ein anderes Medium von dem Sie wiederherstellen wollen."
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Anderes Medium"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "System wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Benutzerkennzeichen wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Sonstiges wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Auswahl des Pfades der wiederhergestellt werden soll (statt „/“"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Erstelle Sicherung vor dem Wiederherstellen (nur fĂźr inkrementelle "
-"Sicherungen)."
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Benutzerkennzeichen vor dem Wiederherstellen entfernen."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Alle Sicherungen wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "BenutzergefĂźhrte Wiederherstellung"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Hilfe"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "<- ZurĂźck"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Speichern"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Sicherung erstellen"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Wiederherstellen"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Weiter ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Bitte erstellen Sie eine Sicherung, bevor Sie wiederherstellen kĂśnnen.\n"
-"oder stellen Sie sicher, dass der Pfad zu den Sicherungen korrekt ist."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-"Sendmail Fehler\n"
-" Ihre Bericht-Mail konnte nicht versandt werden.\n"
-" Bitte richten Sie Sendmail korrekt ein."
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Zu installierende Pakete"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Fehler bei der Üertragung via FTP.\n"
-"Bitte korrigieren Sie Ihre FTP-Konfiguration."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Bitte wählen Sie die wiederherzustellenden Daten..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Bitte wählen Sie ein Sicherungsmedium..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Bitte wählen Sie die zu sichernden Daten..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Keine Konfigurationsdatei gefunde.\n"
-"Bitte wählen Sie den „Assistenten“ oder „Erweitert“."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "In Entwicklung, haben Sie noch etwas Geduld ..."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Systemdateien sichern"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Benutzerdateien sichern"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Andere Dateien sichern"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Fortschritt"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "DatenĂźagung via FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Dateien Ăźbertragen ..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Liste der Daten, die auf CD-ROM sollen."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Bitte geben Sie die CD-Brenngeschwindigkeit ein"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Bitte geben Sie den CD-Brenner an (etwa 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Bitte markieren, falls Sie „install boot“ auf Ihrer CD haben wollen."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Jetzt Sicherung anhand der Konfigurationsdatei erstellen."
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Sicherungskonfiguration anzeiegen"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "AssistentengestĂźtzte Konfiguration"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Expertenkonfiguration"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Jetzt sichern"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "DrakBackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-" In diesem Schritt erlaubt Ihnen DrakBackup folgende Änderungen:\n"
-"\n"
-" - Kompressionsmodus:\n"
-" \n"
-" Mit der „bzip2“ Kompression, werden Ihre Daten\n"
-" besser als mit „gzip“ komprimiert (ca. 2-10 %).\n"
-" Standardmäßig ist dier Modus deaktiviert, da er\n"
-" mehr Zeit benĂśtigt (bis zu 1.000%).\n"
-" \n"
-" - Aktualisierungsmodus:\n"
-"\n"
-" Mit dieser Option kĂśnnen Sie Ihre Sicherungskopie\n"
-" aktuialisieren. Das ist momentan nicht sehr sinnvoll,\n"
-" da Sie Ihre Kopie auspacken mĂźssen, um sie \n"
-" aktualisieren zu kĂśnnen.\n"
-" \n"
-" - Der „.backupignore“-Mode:\n"
-"\n"
-" Vie bei dem Programm „cvs“, wird DrakBackup alle\n"
-" Dateien/Ordner, die in der Datei „.backupignore“\n"
-" des aktuellen Verzeichnisses aufgefĂźhrt sind,\n"
-" von der Sicherung ausschließen.\n"
-" Beispiel:\n"
-" > cat .backupignore\n"
-" *.o\n"
-" *~\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Einige der Sendmail-Fehler beruhen auf einer\n"
-" fehlerhaften PostFix Konfiguration. Um sie zu\n"
-" beheben müssen Sie „myhostname“ oder „mydomain“\n"
-" in „/etc/postfix/main.cf“ korrigieren.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-" - Systemdateien sichern:\n"
-" \n"
-"\tDiese Option erlaub es Ihnen Ihr „/etc“ Verzeichnis\n"
-"\tmit den darin enthaltenen Konfigurationsdateien zu\n"
-"\tsichern. Seien Sie vorsichtig, damit Sie während der\n"
-"\tWiederherstellung folgende Dateien nicht Ăźberschreiben:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Benutzerdateien sichern:\n"
-"\n"
-"\tDiese Option erlaubt es Ihnen die Benutzerkenn-\n"
-"\tzeichen zu wählen, deren Daten gesichert werden\n"
-"\tsollen.\n"
-"\tEs ist sinnvoll, die Browser-Caches vom Sichern\n"
-"\tauszunehmen, um Sicherungsplatz zu sparen.\n"
-"\n"
-" - Andere Dateien sichern:\n"
-"\n"
-"\tMit dieser Option kĂśnnen Sie weitere Dateienn\n"
-"\tzum Sichern vorsehen. Sollten Sie diese Version\n"
-"\tverwenden, kĂśnnen Sie momentan keine inkre-\n"
-"\tmentellen Aktualisierungen vornehmen.\n"
-"\n"
-" - Inkrementelle Archivierung:\n"
-"\n"
-"\tInkrementelle Archivierung ist die mächtigste\n"
-"\tder vorhandenen Optionen. Sie erlaubt es\n"
-"\tIhnen beim ersten Aufruf eine komplette\n"
-"\tSicherungskopie Ihres Systems zu erstellen und\n"
-"\tanschließnd nur noch Änderungen zu speichern.\n"
-"\tSomit sind Sie in der Lage, während des Wieder-\n"
-"\therstellens, den Datenbestand eines bestimmten\n"
-"\tZeitpunkts zu erzeugen.\n"
-"\tSollten sie diese Alernative nicht gewählt haben,\n"
-"\twerden die alten Sicherungen vor dem Ertellen\n"
-"\teiner neuen Sicherungskopie gelĂśscht.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft by Sebastien DUPONT <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"Parameter:\n"
-"\n"
-"Seien Sie vorsichtig, wenn Sie FTP-Sicherungskopien verwenden, \n"
-"da nur vollständig erstelle Sicherungskopien sum Server kopiert.\n"
-"werden. Die Sicherungskopie muss also erst lokal auf Ihrem \n"
-"Rechner erstellt werden.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Wiederherstellungsprobleme:\n"
-"\n"
-"DrakBackup wird bei der Wiederherstellung alle Dateien \n"
-"kontrollieren, bevor sie wiederhergestellt werden.\n"
-"Da vor der Wiederherstellung alle Dateien im \n"
-"Zielverzeichnis von DrakBackup gelĂśscht werden, \n"
-"gehen alle darin entghaltenen Daten verloren! \n"
-"Seien Sie daher vorsichtig und ändern Sie die Sicherungskopien \n"
-"nicht manuell.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Die Installation von %s schlug Fehl. Folgender Fehler trat auf:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Suche installierte Schriften"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Auswahl installierter Schriften zurĂźcksetzen"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "Alle Schriften analysieren"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "Keine Schriften gefunden"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "Fertig"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "Ich konnte keine Schriften in Ihren eingehängten Partitionen finden"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Neuwahl korrekter Schriften"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "Konnte keine Schriften finden.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Suche installierter Schriften"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kopiere Schriften"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation von TrueType Schriften"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Bitte warten Sie ttmkfdir arbeitet ..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "TrueType Installation beendet"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Konvertieren der Schriften"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "Erzeuge „type1inst“"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscriptreferenz"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf-Schriftkonvertierung"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm-Schriftkonvertierung"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Temporäre Dateien lÜschen"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Neustart des X-FontServers"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Schriftdateien lĂśschen"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs Neustart"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Stellen Sie sicher, das Sie das Recht haben, die Schriften die Sie \n"
-"in Ihr System einbinden wollen, zu verwenden.\n"
-"\n"
-"- Sie kÜnnen die Schriften auf normalem Weg einbinden. In seltenen Fällen \n"
-"kĂśnnen defekte Schriften den X-Server lahmlegen."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Schriften einbinden"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Windows-Schriften verwenden"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Schiften deinstallieren"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Erweiterte Einstellungen"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Font-Liste"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Wählen Sie die Programme, die die Schriften verwenden sollen:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Generische Drucker"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Wählen Sie eine Schriftdatei bzw. ein Verzeichnis und betätigen Sie "
-"„Hinzufügen“"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Liste installieren"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Klicken Sie hier, wenn Sie sicher sind."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Hier, falls nicht."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Markierung lĂśschen"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Alle auswählen"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Liste entfernen"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Vortests"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Schriften auf Ihren Rechner kopieren"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installiere und konvertiere Fonts"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Nach der Installation"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Entfernen von Schriftarten auf Ihrem Rechner"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Nach dem Entfernen"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Teilen der Internet-Verbindung"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Teilen der Internetverbindung momentan eingeschaltet."
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie aktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "deaktivieren"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "Verwerfen"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "neu konfigurieren"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Server deaktivieren ..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Teilen der Internet-Verbindung ist nun abgeschaltet."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Teilen der Internet-Verbindung momentan abgeschaltet."
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine geteilte Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie deaktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "aktivieren"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Server aktivieren ..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Teilen der Internetverbindung ist nun eingeschaltet."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sie sind dabei, Ihren Rechner zu konfigurieren, dass er die eingerichtete \n"
-"Internetverbindung mit einem lokalem Netzwerk teilt.\n"
-"\n"
-"Anmerkung: Sie benĂśtigen eine Netzwerkkarte, mit deren Hilfe Sie ein \n"
-"lokales Netz (LAN) aufsetzen kĂśnnen."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Schnittstelle %s (verwendet Modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Schnittstelle: %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Sie haben keine Netzwerkkarte!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ihr Rechner hat keine konfigurierte Netzwerkkarte. Bitte verwenden Sie erst "
-"HardDrake, bevor Sie weiter machen."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Netzwerkkarte"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sie haben nur eine konfiguriertes Netzwerkgerät an Ihrem Rechner:\n"
-"\n"
-"%s\n"
-"\n"
-"Ich setze ihr lokales Netz damit auf."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bitte wählen Sie die Netzwerkkarte, die mit Ihrem lokalen Netzwerk \n"
-"verbunden ist."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Ihr Netzwerk ist bereits konfiguriert"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Warnung, das Netzwerkgerät „%s“ ist bereits konfiguriert.\n"
-"\n"
-"Wollen Sie eine automatische Neukonfiguration?\n"
-"\n"
-"Sie kĂśnnen auch eine manuelle Einrichtung vornehmen - dafĂźr sollten Sie "
-"jedoch wissen, wie das funktioniert."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automatische Rekonfiguration"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Aktuelle Schnittstellenkonfiguration anzeigen"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktuelle Konfiguration von „%s“:\n"
-"\n"
-"Netzwerk: %s\n"
-"IP-Adresse: %s\n"
-"IP-Eigenschaften: %s\n"
-"Treiber: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Ich kann Ihre aktuelle Konfiguration beibehalten und annehmen, dass Sie "
-"bereits einen DHCP-Server eingerichtet haben. Stellen Sie in diesem Fall "
-"sicher, dass ich Ihr Klasse-C Netzwerk korrekt erkannt habe. Ich werde es "
-"weder neukonfigurieren, noch Ihre DHCP-Konfiguration ändern.\n"
-"\n"
-"Ich kann jedoch auch Ihre Schnittstelle neu konfigurieren und einen DHCP-"
-"Server fĂźr Sie aufsetzen.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Lokales Klasse-C Netzwerk"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Diese) DHCP-Server IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Neu konfigurieren des Geräts und des DHCP-Servers"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Das lokale Netzwerk endet nicht auf „.0“ - bereinige."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Es liegt ein mĂśglicher LAN-Adressen Konflikt in der Konfiguration\n"
-"von %s vor!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Ich habe eine Firewall-Konfiguration gefunden!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"WARNUNG: Ich habe eine eine Firewall-Konfiguration gefunden. \n"
-"MĂśglicherweise mĂźssen Sie nach der Installation einige Einstellungen \n"
-"von Hand vornehmen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfigurieren ..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skripte konfigurieren, Software installieren, Dienste starten ..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme beim Installieren von Paket %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Es wurde alles eingerichtet.\n"
-"Sie kĂśnnen Ihre Internetverbindung nun anderen Rechnern in Ihrem \n"
-"lokalen Netz mittels automatischer Netzwerk-Konfiguration (DHCP) \n"
-"teilen."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Die Einstellungen wurden bereits vorgenommen, sie sind nur nicht aktiviert."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die Einstellungen wurden bereits vorgenommen und sind aktiv."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Teilen der Internetverbindung wurde noch nicht konfiguriert."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Teilen der Internetverbindung - Konfiguration"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Willkommen zu DrakGW -\n"
-"das Werkzeug zum Teilen Ihrer Internetverbindung\n"
-"\n"
-"%s\n"
-"\n"
-"Wählen Sie „Konfigurieren“ wenn Sie den Assistenten starten wollen."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netzwerk Konfiguration (%d Karten)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Profil lĂśschen..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Zu lĂśschendes Profil: "
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Neues Profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr "Name des neuen Profils (es wird als Kopie des aktuellen erstellt):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Rechnername: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetzugang"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Typ:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Schnittstelle:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Bitte Warten"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Internet-Zugang konfigurieren"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN Konfiguration"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Treiber"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Schnittstelle"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Status"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Netzwerk konfigurieren"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Hier starten Sie den Assistenten ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistent..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Anwenden"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Einen Moment ... ich richte die Konfiguration ein"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Verbunden"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nicht Verbunden"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Verbinden ..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Trenne Verbindung ..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
-"diese ihr Netzwerk."
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Schnittstelle eingerichtet.\n"
-"Sie kÜnnen dies tun, indem Sie die Schaltfläche \n"
-"„Konfigurieren“ betätigen."
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Konfiguration"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot-Protokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Beim Hochfahren gestartet"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP Klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "Jetzt aktivieren"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "Jetzt deaktivieren"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Diese Schnittstelle wurde noch nicht eingerichtet.\n"
-"Starten Sie den Konfigurationsassistenten im Hauptfenster."
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Internetverbindung eingerichtet.\n"
-"Sie kÜnnen dies tun, indem Sie die Schaltfläche \n"
-"„Konfigurieren“ betätigen."
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Verbindungstyp: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameter"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Netzwerkkarte"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-Klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Sicherheitsebene einstellen"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollzentrum"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Wählen Sie das Werkzeug, das Sie verwenden wollen"
-
-# ../../standalone/drakxtv_.c:37ç
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (Kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (terrestrisch)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (Kabel)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (Kabel-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "China (terrestrisch)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japan (terrestrisch)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japan (Kabel)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Osteuropa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irland"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Westeuropa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australien"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Neuseeland"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "SĂźdafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentinien"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Bitte geben Sie Ihre Fernsehnorm und Region ein"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Fernsehnorm:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Region:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Sendersuche ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Sendersuche..."
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "Verwendung: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wollen Sie, dass die RĂźcktaste auf den Konsolen Entfernen sendet?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "CD-ROM wechseln"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Bitte legen Sie die Installations-CD-ROM in Ihr Laufwerk und drĂźcken \n"
-"Sie dann „OK“. Falls Sie sie nicht vorliegen haben, drücken Sie \n"
-"„Abbruch“."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ich bin nicht in der Lage, eine Live Aktualisierung durchzufĂźhren!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Die Einstellungen wurden vorgenommen, werden jedoch erst nach einer "
-"Neuanmeldung wirksam"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "LogDrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Nur fĂźr diesen Tag zeigen"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Datei/_Neu"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Datei/_Öffnen"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Datei/_Speichern"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Datei/Speichern_als"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Datei/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Optionen"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Optionen/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Hilfe"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/_Hilfe/_Über..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Benutzer"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Nachrichten"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "SysLog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Erklärung der Mandrake Programme"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "Suche starten"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ihre LogbĂźcher betrachen"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Einstellungen"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "Übereinstimmung mit"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "keine Übereinstimmung mit"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Dateien wählen"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalender"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Inhalt der LogbĂźcher"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "E-Mail/SMS Benachrichtigung"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Einen Moment, ich durchsuche: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Mail/SMS Benachrichtigungskonfiguration"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Herzlich willkommen zum E-Mail/SMS Konfigurationsassistenten.\n"
-"\n"
-"Hier kĂśnnen Sie Ihr Benachrichtigungssystem einrichten.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "Dienste einstellen"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Sie weden benachrtichtigt, falls einer der gewählten Dienste nichtmehr "
-"verfĂźgbar ist."
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "Einstellungen laden"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Sie erhalten eine Nachricht, wen die Load Ăźber diesen Wert steigt"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "Benachrichtigungskonfiguration"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Stellen Sie ein, wie das System Sie benachrichtigen soll"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Speichern unter..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Bitte wählen Sie Ihren Maustyp."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "Kein „serial_usb“ gefunden\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Die dritte Maustaste emulieren?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s an %s gefunden. Wolen Sie ihn einrichten?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Wählen Sie einen Scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Dieser %s Scanner wird nicht unterstĂźtzt"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot Gerät"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Dieser %s Scanner muss von PrinterDrake konfiguriert werden.\n"
-"Sie kĂśnnen Pronterdrake im Mandrake-Kontrollzentrum im Hardware-Bereich "
-"starten."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Firewall-Konfiguration"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Firewall-Konfiguration"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Sie haben bereits eine Firewall eingerichtet.\n"
-"Wählen Sie die Schaltfläche „Konfigurieren“,\n"
-"um sie zu lÜschen oder zu verändern."
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewall\n"
-"\n"
-"Wählen Sie die Schaltfläche „Konfigurieren“,\n"
-"um eine Standard-Firewall einzurichten."
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Sprache auswählen"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Installationsart auswählen"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Festplatten suchen"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Maus konfigurieren"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Tastatur auswählen"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sicherheit"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dateisysteme einrichten"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Partitionen formatieren"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Zu installierende Pakete"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "System installieren"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Benutzer hinzufĂźgen"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Netzwerk konfigurieren"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Dienste konfigurieren"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "BS-Starter installieren"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Startdiskette erstellen"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "X konfigurieren"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Systemaktualisierungen"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Installation beenden"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"TinyFirewall Konfigurierer\n"
-"\n"
-"Hiermit konfigurieren Sie eine persĂśnliche Firewall fĂźr diesen\n"
-"Mandrake Linux Rechner. Sollten Sie an einer speziellen ausgereiften\n"
-"Firewall-LĂśsung interessiert sein, schauen Sie sich nach der speziell\n"
-"dafĂźr entwickelten MandrakeSecurity Firewall Distribution um."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Wir fragen Sie nun, welchen Diensten Sie direkten Internetzugang\n"
-"gestatten wollen. Bitte machen Sie sich sorgfältig Gedanken ßber diese\n"
-"Fragen. Es geht hierbei schließlich um die Sicherheit Ihres Systems!\n"
-"\n"
-"Bitte schotten Sie jeden Dienst, den sie aktuell nicht verwenden, vom \n"
-"Netz ab. Sie kĂśnnen die vorgenommenen Einstellungen mit Hilfe dieses \n"
-"Programms jederzeit wieder ändern!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Betreiben Sie auf Ihrem Rechner einen Web-Server, der im gesamten\n"
-"Internet sichtbar sein soll? Falls der Server nur auf Ihrer Maschine\n"
-"zugreifbar sein soll, kĂśnnen Sie hier getrost NEIN antworten.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen Name-Server auf Ihrem Rechner? Falls Sie keinen\n"
-"Eingerichtet haben, um dem gesamten Internet IP und Bereichsinformationen\n"
-"anzubieten, antworten Sie hier NEIN.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Wollen Sie eingehende Secure Shell (ssh) Verbindungen gestatten?\n"
-"Es handelt sich hierbei um einen Ersatz fĂźr Telnet. Falls sie noch\n"
-"Telnet verwenden, sollten Sie definitiv auf dieses Protokoll wechseln.\n"
-"Telnet ßberträgt Ihre gesamte Kommunikation (also auch PasswÜrter)\n"
-"UNVERSCHLÜSSELT! Sie bieten damit einem potentiellen Angreife ein\n"
-"leichtes Spiel. Die SSH hingegen verschlĂźsselt die komplette\n"
-"Kommunikation und warnt sogar falls sie eine Unregelmäßigkeit bemerkt."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Wollen Sie eingehende Telnet-Verbindungen gestatten?\n"
-"Dienst extrem unsicher, wie wir bereits frßher erwähnten. Wir empfehlen\n"
-"Ihnen daher nachdrĂźcklich mit NEIN zu antworten und im Bedarfsfall auf\n"
-"die SSH auszuweichen.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Betreiben Sie einen FTP Server der aus dem Internet zugreifbar sein soll?\n"
-"Falls ja, sollten Sie ihn jedoch nur für „anonymen Transfer“ verwenden,\n"
-"da das Protokoll keine VerschlĂźsselung Ăźbertragener PasswĂśrter vorsieht."
-"Verwenden Sie „scp“ aus dem SSH Paket zum verschlüsselten\n"
-"Datentransfer zwischen zwei Rechnern.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen Mail-Server? Falls Sie Ihre Nachrichten mit\n"
-"einem textbasierten E-Mail Programm wie pine oder mutt schreiben\n"
-"ist dies vermutlich der Fall. Andernfalls sollten Sie den Dienst\n"
-"abschalten.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Betreiben Sie einen POP oder IMAP Server? Sie wĂźrden damit\n"
-"Postfächer fßr nicht-web-basierten E-Mail Zugriff ßber diese\n"
-"Maschine bereitstellen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Sie scheinen einen 2.2er Kern zu verwenden. Falls Sie Ihre\n"
-"IP-Adresse automatisch im lokalen Netzwerk erhalten sollen,\n"
-"mĂźssen wir dies gestatten. Ist das bei Ihnen der Fall?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Wird die Zeit Ihres Rechners automatisch mit anderen Rechnern\n"
-"synchronisiert? Dies ist häufig ab mittelgroßen UNIX/Linux Betrieben\n"
-"der Fall. Damit wird ein einheitliches Zeitschema, etwa fĂźr die\n"
-"Datensicherung zugrunde gelegt. Wenn Sie nicht in einem größeren\n"
-"Betrieb arbeiten oder noch nie etwas zu diesem Thema gehĂśrt haben,\n"
-"trifft es fĂźr Sie vermutlich nicht zu."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfiguration beendet. Soll ich die Änderungen auf Platte schreiben?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ich kann „%s“ nicht öffnen: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ich kann „%s“ nicht zum Schreiben öffnen: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Nein, ich benĂśtige kein DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Ja, ich benĂśtige DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Nein, ich benĂśtige kein NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Ja, ich benĂśtige NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Nicht speichern"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Speichern und beenden"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Firewall-Konfigurationsassistent"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Nein (Vom externen Netz abschirmen)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Ja (durch die Firewall erlauben)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Bitte warten, Kontrolle der installierten Pakete ..."
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Fehler bein Versuch die gewĂźnschten Pakete (%s und Bastille) zu "
-"installieren!\n"
-"Versuchen Sie es manuell."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Web/FTP"
-
-#
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Netzwerk-Computer (Klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-Server, SMB-Server, Proxy-Server, SSH-Server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Werkzeuge fĂźr Ihren Palm Pilot oder Ihren Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Arbeitsplatzrechner"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Server, Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domänen- (DNS) und Netzwerk Informationsserver (NIS)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office-Programme: Textverarbeitung (KWord, Abiword), Tabellenkalkulation "
-"(KSpread, Gnumeric), PDF-Betrachter, usw."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio Programme: MP3- und Midi-Abspieler, Mixer, usw."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "BĂźcher und HOWTOs zu GNU/Linux und Freier Software"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, usw."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia / Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Programme fĂźr Mail, News, WWW, FTP und Chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Datenbank"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgeSQL oder MySQL Datenbankserver"
-
-#
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Werkzeuge, die die Konfiguration Ihres Rechners erleichtern"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia / Sound"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Werkzeuge"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsolen-Werkzeuge"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-"Postfix E-Mail-Server und\n"
-"Inn Diskussionsforen-Server"
-
-#
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internetrechner"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediarechner"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Weitere Arbeitsoberflächen (GNOME, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Das K Desktop Environment, die Standard-Arbeitsoberfläche mit einer Sammlung "
-"zugehĂśriger Programme"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafische Arbeitsoberfläche"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache und Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Werkzeuge zur Erstellung und zum Brennen von CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "BĂźro-Arbeitsplatz"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "GNOME, IceWM, Window Maker, Enlightenment, Fvwm, usw."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Bildverarbeitungsprogramme wie der GIMP"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C und C++ Entwicklung: Bibliotheken, Programme und Include-Dateien"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Netzwerkrechner Server"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Spiel-Station"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videoabspieler und Editoren"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia / Grafik"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Spiele: Arcade-, Brett-, Strategiespiele, usw."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Programme zum E-Mail bzw. News lesen und senden (pine, mutt, tin, ...)sowie "
-"zum durchstĂśbern des WWW"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivierung, Emulation, Überwachung"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzverwaltung"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Eine grafische Oberfläche mit anwenderfreundlichen Anwendungen und Werkzeugen"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klienten fĂźr verschiedene Protokolle, u.a. SSH"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet-Gateway"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Sound- und Video-Abspieler/Editoren"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Andere grafische Arbeitsoberflächen"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editoren, Shells, Dateiwerkzeuge, Konsolen"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Finanzverwaltungsprogramme, etwa Gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "PersĂśnliches Informationsmanagement"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia / CD-Brenner"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Wissenschaftlicher Arbeitsplatzrechner"
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
deleted file mode 100644
index 1de4183da..000000000
--- a/perl-install/share/po/el.po
+++ /dev/null
@@ -1,13124 +0,0 @@
-# Greek Translation of DrakX.
-# Copyright (c) 1999 MandrakeSoft
-# FIRST AUTHOR Theodore J. Soldatos <theodore@eexi.gr>, 1999-2000.
-# Thanos Kyritsis <djart@hellug.gr>, 2001
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-23 23:59+0300\n"
-"Last-Translator: Thanos Kyritsis <djart@hellug.gr>\n"
-"Language-Team: Greek <nls@tux.hellug.gr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-7\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Ńýčěéóç üëůí ôůí ęĺöáëţí áíĺîÜńôçôá"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "×ńŢóç ĺđÝęôáóçň Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Ńýčěéóç ěüíď ôçň ęÜńôáň \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Ńýčěéóç đďëëţí ęĺöáëţí"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ôď óýóôçěÜ óáň őđďóôçńßćĺé ńýčěéóç đďëëáđëţí ęĺöáëţí.\n"
-"Ôß čÝëĺôĺ íá ęÜíĺôĺ;"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "ĘÜńôá ăńáöéęţí"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "ĹđéëÝîôĺ ęÜńôá ăńáöéęţí"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "ĹđéëÝîôĺ X server (ďäçăüň ęÜńôáň ăńáöéęţí)"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "ĺîőđçńĺôçôŢň X Window"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "ĹđéëÝîôĺ X server (ďäçăüň ęÜńôáň ăńáöéęţí)"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "ĺîőđçńĺôçôŢň X Window"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Ôß ôýđďő XFree čÝëĺôĺ íá Ý÷ĺôĺ;"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ç ęÜńôá ăńáöéęţí óáň őđďóôçńßćĺé ĺđéôÜ÷őíóç ôńéóäéÜóôáôůí ăńáöéęţí ěüíď \n"
-"ěĺ ôá XFree %s. Ç ęÜńôá óáň őđďóôçńßćĺôáé áđü ôá XFree %s ôá ďđďßá ěđďńĺß íá "
-"äßíďőí \n"
-"ęáëýôĺńç őđďóôŢńéîç ăéá äéóäéÜóôáôá ăńáöéęÜ."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Ç ęÜńôá ăńáöéęţí óáň őđďóôçńßćĺé ĺđéôÜ÷őíóç ôńéóäéÜóôáôůí ăńáöéęţí óôá XFree "
-"%s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s ěĺ ĺđéôÜ÷őíóç ôńéóäéÜóôáôůí ăńáöéęţí"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ç ęÜńôá ăńáöéęţí óáň őđďóôçńßćĺé ĺđéôÜ÷őíóç ôńéóäéÜóôáôůí ăńáöéęţí óôá XFree "
-"%s,\n"
-"ĐŃĎÓĎ×Ç: ĐĹÉŃÁĚÁÔÉĘÇ ŐĐĎÓÔÇŃÉÎÇ - ĚĐĎŃĹÉ ÍÁ ĐÁĂŮÓĹÉ ÔĎÍ ŐĐĎËĎĂÉÓÔÇ ÓÁÓ!"
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s ěĺ ĐĹÉŃÁĚÁÔÉĘÇ ĺđéôÜ÷őíóç ôńéóäéÜóôáôůí ăńáöéęţí"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Ç ęÜńôá ăńáöéęţí óáň őđďóôçńßćĺé ĺđéôÜ÷őíóç ôńéóäéÜóôáôůí ăńáöéęţí ěüíď \n"
-"ěĺ ôá XFree %s. ĐŃĎÓĎ×Ç: ĐĹÉŃÁĚÁÔÉĘÇ ŐĐĎÓÔÇŃÉÎÇ - ĚĐĎŃĹÉ ÍÁ ĐÁĂŮÓĹÉ ÔĎÍ "
-"ŐĐĎËĎĂÉÓÔÇ ÓÁÓ!\n"
-"Ç ęÜńôá óáň őđďóôçńßćĺôáé áđü ôá XFree %s ôá ďđďßá ěđďńĺß íá äßíďőí ęáëýôĺńç "
-"őđďóôŢńéîç\n"
-"ăéá äéóäéÜóôáôá ăńáöéęÜ."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (ďäçăüň đńďâďëŢň ĺăęáôÜóôáóçň)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Ńőčěßóĺéň XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "ĚÝăĺčďň ěíŢěçň ęÜńôáň ăńáöéęţí"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Ńőčěßóĺéň X server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "ĹđéëÝîôĺ ďčüíç"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Ďčüíç"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Ďé äýď ęńßóéěĺň đáńÜěĺôńďé ĺßíáé ç óő÷íüôçôá ęáôáęüńőöçň áíáíÝůóçň, çďđďßá "
-"ĺßíáé\n"
-"óő÷íüôçôá ěĺ ôçí ďđďßá áíáíĺţíĺôáé ďëüęëçńç ç ďčüíç, ęáčţň ęáé ç óő÷íüôçôá\n"
-"ďńéćüíôéáň áíáíÝůóçň, ç ďđďßá ĺßíáé ç óő÷íüôçôá ěĺ ôçí ďđďßá áíáíĺţíďíôáé\n"
-"ďé ďńéćüíôéĺň ăńáěěÝň.\n"
-"\n"
-"Ĺßíáé ĐĎËŐ ÓÇĚÁÍÔÉĘĎ íá ěŢí ĺđéëÝîĺôĺ ôýđď ďčüíçň ôďő ďđďßďő ďé óő÷íüôçôĺň\n"
-"áíáíÝůóçň ĺßíáé ĺęôüň ôůí ďńßůí ôçň ďčüíçň óáň: őđÜń÷ĺé ęßíäőíďň "
-"ęáôáóôńďöŢň\n"
-"ôçň ďčüíçň óáň. Áí äĺí ĺßóôĺ óßăďőńďé, ęÜíôĺ ěéá óőíôçńçôéęŢ ĺđéëďăŢ."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Óő÷íüôçôá ďńéćüíôéáň áíáíÝůóçň"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Óő÷íüôçôá ęáôáęüńőöçň áíáíÝůóçň"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ç ďčüíç äĺí Ý÷ĺé ńőčěéóôĺß áęüěç"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Ç ęÜńôá ăńáöéęţí äĺí Ý÷ĺé ńőčěéóôĺß áęüěç"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Äĺí Ý÷ďőí ĺđéëĺăĺß áíáëýóĺéň áęüěç"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "ČÝëĺôĺ íá äďęéěÜóĺôĺ ôéň ńőčěßóĺéň;"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Đńďóď÷Ţ: Ç äďęéěŢ ĺßíáé ĺđéęßíäőíç óĺ áőôŢ ôçí ęÜńôá ăńáöéęţí"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "ÄďęéěŢ ńőčěßóĺůí"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"äďęéěÜóôĺ íá áëëÜîĺôĺ ęÜđďéĺň đáńáěÝôńďőň"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "ĐńďęëŢčçęĺ óöÜëěá:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "¸îďäďň óĺ %d äĺőôĺńüëĺđôá"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ĺßíáé áőôŢ ç óůóôŢ ńýčěéóç;"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "ĐńďęëŢčçęĺ óöÜëěá, äďęéěÜóôĺ íá áëëÜîĺôĺ ęÜđďéĺň đáńáěÝôńďőň"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "ÁíÜëőóç"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "ĹđéëÝîôĺ áíÜëőóç ęáé âÜčďň ÷ńţěáôďň"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "ĘÜńôá ăńáöéęţí: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "śëëá"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ďę"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "ĘáôÜóôáóç đńď÷ůńçěÝíůí"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "ĹěöÜíéóç üëůí"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Áíáëýóĺéň"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Äéáńýčěéóç đëçęôńďëďăßďő: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Ôýđďň đďíôéęéďý: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "ÓőóęĺőŢ đďíôéęéďý: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ďčüíç: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Óő÷íüôçôá ďńéćüíôéáň áíáíÝůóçň: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Óő÷íüôçôá ęáôáęüńőöçň áíáíÝůóçň: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "ĘÜńôá ăńáöéęţí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "ĘÜńôá ăńáöéęţí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "ĚíŢěç ęÜńôáň ăńáöéęţí: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "ÂÜčďň ÷ńţěáôďň: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "ÁíÜëőóç: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Ďäçăüň XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Đńďĺôďéěáóßá ńőčěßóĺůí ăńáöéęďý đĺńéâÜëëďíôďň (X-Window)"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Ôé čÝëĺôĺ íá ęÜíĺôĺ;"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "ÁëëáăŢ ďčüíçň"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "ÁëëáăŢ ęÜńôáň ăńáöéęţí"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "ÁëëáăŢ ńőčěßóĺůí X server"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "ÁëëáăŢ áíÜëőóçň"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "ĐńďâďëŢ đëçńďöďńéţí"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "ĹđáíÜëçřç äďęéěŢň"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "¸îďäďň"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"ÄéáôŢńçóç őđáń÷üíôůí ńőčěßóĺůí;\n"
-"Ďé ôńÝ÷ďőóĺň ńőčěßóĺéň ĺßíáé:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Ăńáöéęü đĺńéâÜëëďí (X) óôçí ĺęęßíçóç"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ěđďńţ íá ńőčěßóů ôď óýóôçěÜ óáň Ýôóé ţóôĺ íá îĺęéíÜĺé áőôüěáôá óĺ\n"
-"ăńáöéęü đĺńéâÜëëďí (X-Windows).\n"
-"Ĺđéčőěĺßôĺ áőôüěáôç ĺęęßíçóç ăńáöéęďý đĺńéâÜëëďíôďň;"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Đáńáęáëţ ĺđáíáóőíäĺčĺßôĺ ůň %s ăéá ĺíĺńăďđďßçóç ôůí áëëáăţí"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Đáńáęáëţ áđďóőíäĺčĺßôĺ ęáé ěĺôÜ đáôŢóôĺ Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 ÷ńţěáôá (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ÷éëéÜäĺň ÷ńţěáôá (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ÷éëéÜäĺň ÷ńţěáôá (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 ĺęáôďěěýńéá ÷ńţěáôá (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 äéóĺęáôďěěýńéá ÷ńţěáôá (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kb"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB Ţ đĺńéóóüôĺńá"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 óôá 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 óôá 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 Compatible, 1024x768 óôá 87 Hz interlaced (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 óôá 87 Hz interlaced, 800x600 óôá 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600 óôá 60 Hz, 640x480 óôá 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Non-Interlaced SVGA, 1024x768 óôá 60 Hz, 800x600 óôá 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "High Frequency SVGA, 1024x768 óôá 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frequency đďő ěđďńĺß íá áđĺéęďíßóĺé áíÜëőóç 1280x1024 óôá 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frequency đďő ěđďńĺß íá áđĺéęďíßóĺé áíÜëőóç 1280x1024 óôá 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frequency đďő ěđďńĺß íá áđĺéęďíßóĺé áíÜëőóç 1280x1024 óôá 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ďčüíç đďő ěđďńĺß íá áđĺéęďíßóĺé áíÜëőóç 1600x1200 óôá 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ďčüíç đďő ěđďńĺß íá áđĺéęďíßóĺé áíÜëőóç 1600x1200 óôá 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Đńţôďň ôďěÝáň ôçň ęáôÜôěçóçň ĺęęßíçóçň"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Đńţôďň ôďěÝáň ôďő äßóęďő (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "ĹăęáôÜóôáóç SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Đďý čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ ôď đńüăńáěěá ĺęęßíçóçň;"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "ĹăęáôÜóôáóç LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO ěĺ ěĺíďý ęĺéěÝíďő"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO ěĺ ăńáöéęü ěĺíďý"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Ĺęęßíçóç áđü ôď DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "ÂáóéęÝň ĺđéëďăÝň đńďăńÜěěáôďň ĺęęßíçóçň"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Bootloader ăéá ÷ńŢóç"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "ĹăęáôÜóôáóç đńďăńÜěěáôďň ĺęęßíçóçň"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "ÓőóęĺőŢ ĺęęßíçóçň"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (äĺí ëĺéôďőńăĺß ěĺ đáëáéüôĺńá BIOS)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "ÓőěđáăŢň"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "óőěđáăŢň"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "ÁíÜëőóç ďčüíçň"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "ĘáčőóôÝńçóç đńéí ôçí ĺęęéíçóç"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Óőíčçěáôéęü"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Óőíčçěáôéęü (îáíÜ)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Áđáăüńĺőóç ĺđéëďăţí ăńáěěŢň ĺíôďëŢň"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "áđáăüńĺőóç"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Ęáčáńéóěüň /tmp óĺ ęÜčĺ ĺęęßíçóç"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "ÁęńéâŢň đďóüôçôáň ěíŢěçň áí ÷ńĺéÜćĺôáé (Ý÷ů ĺíôďđßóĺé %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Ĺíĺńăďđďßçóç đďëëáđëţí profiles"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "ĹéóÜăĺôĺ ěÝăĺčďň ěíŢěçň óĺ Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Ç ĺđéëďăŢ ``Áđáăüńĺőóç ĺđéëďăţí ăńáěěŢň ĺíôďëŢň'' ĺßíáé Ü÷ńçóôç ÷ůńßň "
-"óőíčçěáôéęü"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Đáńáęáëţ đńďóđáčŢóôĺ îáíÜ"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Ôá óőíčçěáôéęÜ ĺßíáé áíüěďéá"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "ĚŢíőěá Init"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "śíďéăěá ĘáčőóôÝńçóçň Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "ÔÝëďň ×ńüíďő Ĺęęßíçóçň ĐőńŢíá"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Ĺíĺńăďđďßçóç ĺęęßíçóçň áđü CD;"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Ĺíĺńăďđďßçóç OF ĺęęßíçóçň;"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Ĺî' ďńéóěďý ëĺéôďőńăéęü óýóôçěá;"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"ŐđÜń÷ďőí ďé áęüëďőčĺň ĺđéëďăÝň.\n"
-"Ěđďńĺßôĺ íá đńďóčÝóĺôĺ ęé Üëëĺň Ţ íá áëëÜîĺôĺ ôéň őđÜń÷ďőóĺň."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "ĐńďóčŢęç"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Ďëďęëçńţčçęĺ"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ôńďđďđďßçóç"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Ôß ôýđďő ĺđéëďăŢ čÝëĺôĺ íá đńďóčÝóĺôĺ"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "śëëď ëĺéôďőńăéęü (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "śëëď ëĺéôďőńăéęü (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "śëëď ëĺéôďőńăéęü (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Đßíáęáň"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "ÁíáóöáëÝň"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "ĹôéęÝôôá"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "ĹđéëďăŢ ĺî' ďńéóěďý"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-ěÝăĺčďň"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "×ůńßňVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Áöáßńĺóç ĺđéëďăŢň"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Äĺí ĺđéôńÝđĺôáé Üäĺéá ĺôéęÝôôá"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "ĐńÝđĺé íá Ý÷ĺôĺ ěéá ęáôÜôěçóç swap"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "ÁőôŢ ç ĺôéęĺôôá ÷ńçóéěďđďéĺßôáé Ţäç"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "ÂńŢęá %s %s đńďóáńěďăĺßň"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "¸÷ĺôĺ áëëďí;"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "¸÷ĺôĺ ęÜđďéďí đńďóáńěďăÝá %s;"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "ź÷é"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Íáé"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "ĐńďâďëŢ đëçńďöďńéţí őëéęďý"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ĹăęáôÜóôáóç ďäçăďý ăéá %s ęÜńôá %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Đďéüí %s ďäçăü íá äďęéěÜóů;"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Óĺ ěĺńéęÝň đĺńéđôţóĺéň, ď %s ďäçăüň ÷ńĺéÜćĺôáé ĺđéđëÝďí đáńáěÝôńďőň ăéá\n"
-"íá ëĺéôďőńăŢóĺé óůóôÜ, đáń' üëď đďő óőíŢčůň ëĺéôďőńăĺß ęáé ÷ůńßň áőôÝň.\n"
-"Čá čÝëáôĺ íá äţóĺôĺ ĺđéđëÝďí ĺđéëďăÝň Ţ íá áöŢóĺôĺ ôďí ďäçăü íá ĺîĺôÜóĺé\n"
-"ôď őëéęü óáň ăéá ôéň đáńáěÝôńďőň đďő ÷ńĺéÜćĺôáé; Ç ĺîÝôáóç áőôŢ ßóůň\n"
-"đńďęáëÝóĺé ęüëëçěá ôďő óőóôŢěáôďň, áëëÜ äĺí čá đńďęáëÝóĺé âëÜâç."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Áőôüěáôç ĺîÝôáóç"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Đńďóäéďńéóěüň đáńáěÝôńůí"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ěđďńĺßôĺ ôţńá íá äţóĺôĺ ôéň đáńáěÝôńďőň ăéá ôďí ďäçăü %s.\n"
-"Ďé đáńÜěĺôńďé Ý÷ďőí ôçí ěďńöŢ ``üíďěá=ôéěŢ üíďěá2=ôéěŢ2 ...''.\n"
-"Ăéá đáńÜäĺéăěá, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "ĐáńÜěĺôńďé ďäçăďý"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ç öďńôůóç ôďő ďäçăďý %s áđĺôő÷ĺ.\n"
-"ČÝëĺôĺ íá äďęéěÜóĺôĺ îáíÜ ěĺ äéáöďńĺôéęÝň đáńáěÝôńďőň;"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(ôď %s Ý÷ĺé Ţäç đńďóôĺčĺß)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ôď óőíčçěáôéęü ĺßíáé đďëý áđëü"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Đáńáęáëţ ĺéóÜăĺôĺ ęůäéęü üíďěá"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Ôď ęůäéęü üíďěá ěđďńĺß íá đĺńéÝ÷ĺé ěüíď đĺćÜ ăńÜěěáôá, áńéčěďýň, `-' ęáé `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Áőôü ôď ęůäéęü üíďěá őđÜń÷ĺé Ţäç"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "ĐńďóčŢęç ÷ńŢóôç"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"ĹéóÜăĺôĺ ÷ńŢóôç\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Áđďäď÷Ţ ÷ńŢóôç"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Đńáăěáôéęü üíďěá"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Ęůäéęü üíďěá"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Öëďéüň (shell)"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ĺéęďíßäéď"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Áőôüěáôç óýíäĺóç (Autologin)"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ěđďńţ íá ńőčěßóů ôď óýóôçěÜ óáň Ýôóé ţóôĺ íá óőíäÝĺôáé áőôüěáôá ęáôÜ\n"
-"ôçí ĺęęßíçóç óĺ Ýíáí óőăęĺęńéěÝíď ÷ńŢóôç.\n"
-"ĹÜí äĺí čÝëĺôĺ íá óőěâáßíĺé áőôü, đáôŢóôĺ óôď ęďőěđß áęýńůóçň."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "ĹđéëÝîôĺ ôďí ĺî' ďńéóěďý ÷ńŢóôç:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "ĹđéëÝîôĺ ôďí äéá÷ĺéńéóôŢ đáńáčýńůí đďő čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ěéá ăëţóóá."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Ěđďńĺßôĺ íá ĺđéëÝîĺôĺ ęáé Üëëĺň ăëţóóĺň đďő čá ĺßíáé äéáčÝóéěĺň ěĺôÜ ôď "
-"đÝńáň ôçň ĺăęáôÜóôáóçň"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "źëá"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "ĐńďóčŢęç ÷ńŢóôç"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "ĐńďóáńěďóěÝíď"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Ĺęęßíçóç CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Áőôü ôď đáęÝôď đńÝđĺé íá áíáâáčěéóôĺß\n"
-"Ĺßóôĺ óßăďőńďň üôé čÝëĺôĺ íá ôď áđďĺđéëÝîĺôĺ;"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Áęýńůóç"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Ęáëţň Ţńčáôĺ óôďőň Crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Öôů÷ü"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Ôőđéęü"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Őřçëü"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Őřçëü"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Đáńáíďúęü"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Áőôü ôď ĺđßđĺäď đńÝđĺé íá ÷ńçóéěďđďéçčĺß ěĺ đńďóď÷Ţ. ĘÜíĺé ôď óýóôçěÜ óáň\n"
-"đéď ĺőęďëü÷ńçóôď, áëëÜ đďëý ĺőáßóčçôď. Äĺí đńÝđĺé íá ÷ńçóéěďđďéçčĺß óĺ "
-"óýóôçěá\n"
-"óőíäĺäĺěÝíď óôď Internet Ţ LAN. Äĺí őđÜń÷ďőí ëÝîĺéň ęëĺéäéÜ."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ôţńá őđÜń÷ďőí ëÝîĺéň ęëĺéäéÜ, áëëÜ ç ÷ńŢóç ôďő óőóôŢěáôďň óĺ äßęôőď \n"
-"äĺí óőíßóôáôáé."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Áőôü ĺßíáé ôď óőíçčéóěÝíď ĺđßđĺäď áóöáëĺßáň ăéá Ýíá óýóôçěá đďő čá óőíäĺčĺß\n"
-"ůň đĺëÜôçň óôď Internet. ŐđÜń÷ďőí ôţńá Ýëĺă÷ďé áóöáëĺßáň."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ěĺ áőôü ôď ĺđßđĺäď áóöáëĺßáň ĺßíáé äőíáôŢ ç ÷ńŢóç ôďő óőóôŢěáôďň óôď \n"
-"Internet ůň ĺîőđçńĺôçôŢ. Ç áóöÜëĺéá ĺßíáé áńęĺôÜ őřçëŢ ţóôĺ íá äÝ÷ĺôáé\n"
-"ôáőôü÷ńďíĺň óőíäÝóĺéň áđü đďëëďýň đĺëÜôĺň."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"ÁóöÜëĺéá ĺđéđÝäďő 4, ěĺ ôď óýóôçěá ôĺëĺßůň ęëĺéóôü. ÁóöÜëĺéá \n"
-"óôď ěÝăéóôď äőíáôü."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "ĹđéëÝîôĺ ĺđßđĺäď áóöáëĺßáň"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Ńýčěéóç ĺđéđÝäďő áóöáëĺßáň"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Ńőčěßóĺéň X server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n"
-"\n"
-"EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n"
-"H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "äĺí őđÜń÷ĺé áńęĺôüň ÷ţńďň óôď /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Đďý čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ ôď đńüăńáěěá ĺęęßíçóçň;"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "äĺí őđÜń÷ĺé âďŢčĺéá äéáčÝóéěç áęüěá.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Boot Ôýđďő Ńýčěéóç"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Áń÷ĺßď"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Áń÷ĺßď/¸_îďäďň"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle Categorizing Ďčüíç"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle Ďčüíç"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "ĐáńáäďóéáęŢ Ďčüíç"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "ĐáńáäďóéáęŢ Gtk+ Ďčüíç"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Ĺęęßíçóç ôďő Aurora ęáôÜ ôçí ĺęęßíçóç ôďő óőóôŢěáôďň"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Ëĺéôďőńăßá Lilo/grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Ëĺéôďőńăßá Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"×ńçóéěďđďéĺßôĺ ôďí %s ůň Boot Manager.\n"
-"ĘÜíôĺ ęëßę óôď Ńýčěéóç ăéá íá îĺęéíŢóĺôĺ ôďí ďäçăü ĺăęáôÜóôáóçň."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Ńýčěéóç"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "ĘáôÜóôáóç óőóôŢěáôďň"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "śíďéăěá ôďő X-Window ęáôÜ ôçí ĺęęßíçóç ôďő óőóôŢěáôďň"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "ź÷é, äĺí ĺđéčőěţ áőôüěáôď login"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Íáé, ĺđéčőěţ áőôüěáôď login ěĺ áőôü (user, desktop)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "áäőíáěßá áíďßăěáôďň ôďő /etc/inittab ăéá áíÜăíůóç: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d ëĺđôÜ"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 ëĺđôü"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d äĺőôĺńüëĺđôá"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Äĺí ěđďńţ íá đńďóčÝóů ęáôáôěçóĺéň"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Ěđďńĺßôĺ íá ĺđéëÝîĺôĺ ęáé Üëëĺň ăëţóóĺň đďő čá ĺßíáé äéáčÝóéěĺň ěĺôÜ ôď "
-"đÝńáň ôçň ĺăęáôÜóôáóçň"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Ăáëëéęü"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Âĺëăéęü"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Ăĺńěáíéęü"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Ĺëëçíéęü"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Íďńâçăéęü"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Óďőçäéęü"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Éôáëéęü"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "óĺéńéáęü"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Đáńáęáëţ ęÜíôĺ đńţôá Ýíá áíôßăńáöď áóöáëĺßáň ôůí äĺäďěÝíůí óáň"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "ÄéáâÜóôĺ đńďóĺęôéęÜ!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"ĹÜí óęďđĺýĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ ôď aboot, đńďóÝîôĺ íá áöŢóĺôĺ ĺëĺýčĺńď ÷ţńď "
-"2048 ôďěĺßň ĺßíáé áńęĺôďß)\n"
-"óôçí áń÷Ţ ôďő äßóęďő"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "ÓöÜëěá"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "ĚÜăďň"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "ĹđéëÝîôĺ đńÜîç"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"¸÷ĺôĺ ěéá ěĺăÜëç FAT ęáôÜôěçóç\n"
-"(óőíŢčůň ÷ńçóéěďđďéďýěĺíç áđü Dos Ţ Windows).\n"
-"Óőíéóôţ íá áëëÜîĺôĺ ôď ěÝăĺčüň ôçň đńţôá\n"
-"(ĺđéëÝîôĺ ôçí, ěĺôÜ ĺđéëÝîôĺ \"ÁëëáăŢ ěĺăÝčďőň\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Đáńáęáëţ ęÜíôĺ ęëéę óĺ ěéá ęáôÜôěçóç"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "ËĺđôďěÝńĺéĺň"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "óýíäĺóç áđÝôő÷ĺ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "śäĺéď"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "śëëď"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Ôýđďé óőóôŢěáôďň áń÷ĺßůí:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Äçěéďőńăßá"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Ôýđďň"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "×ńçóéěďđďéŢóôĺ ``%s'' óôç čÝóç ôďő"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "ÄéáăńáöŢ"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "ĘÜíôĺ đńţôá ``Áđďóýíäĺóç''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"ĚĺôÜ ôçí áëëáăŢ ôýđďő óôçí ęáôÜôěçóç %s, üëá ôá äĺäďěÝíá óĺ áőôŢí ôçí "
-"ęáôÜôěçóç čá ÷áčďýí"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "ĹđéëÝîôĺ đńÜîç"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Äçěéďőńăßá íÝáň ęáôÜôěçóçň"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "ĚĺôáđŢäçóç óĺ đńď÷ůńçěÝíď ôńüđď ëĺéôďőńăßáň"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "ĚĺôáđŢäçóç óĺ ęáíďíéęü ôńüđď ëĺéôďőńăßáň"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Áęýńůóç ôĺëĺőôáßáň đńÜîçň"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Íá óőíĺ÷éóů;"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "¸îďäďň ÷ůńßň áđďčŢęĺőóç"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "¸îďäďň ÷ůńßň áđďčŢęĺőóç ôďő đßíáęá ęáôáôěŢóĺůí;"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "ČÝëĺôĺ íá äďęéěÜóĺôĺ ôéň ńőčěßóĺéň;"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Áőôďěáôç ęáôáíďěŢ"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Ęáčáńéóěüň üëůí"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Ĺíôďđéóěüň óęëçńďý äßóęďő"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "źëĺň ďé đńůôĺýďőóĺň ęáôáôěŢóĺéň ĺßíáé óĺ ÷ńŢóç"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Äĺí ěđďńţ íá đńďóčÝóů ęáôáôěçóĺéň"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ăéá íá đńďóčÝóĺôĺ ęáôáôěŢóĺéň, đáńáęáëţ äéáăńÜřôĺ ěßá ĺôóé ţóôĺíá ĺßíáé "
-"äőíáôŢ ç đńďóčŢęç ĺęôĺôáěÝíçň ęáôÜôěçóçň"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "ÁđďčŢęĺőóç đßíáęá ęáôáôěŢóĺůí"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Đßíáęáň ęáôáôěŢóĺůí äéÜóůóçň"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Đßíáęáň ęáôáôěŢóĺůí äéÜóůóçň"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Đßíáęáň ęáôáôěŢóĺůí äéÜóůóçň"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Áőôüěáôç óýíäĺóç áđďóđţěĺíůí ěďíÜäůí áđďčŢęĺőóçň"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "ĹđéëÝîôĺ áń÷ĺßď"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Ď ĺöĺäńéęüň đßíáęáň ęáôáôěŢóĺůí Ý÷ĺé äéáöďńĺôéęü ěÝăĺčďň\n"
-"Íá óőíĺ÷ßóů;"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Đńďĺéäďđďßçóç"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"ĹéóÜăĺôĺ ěéá äéóęÝôôá óôďí ďäçăü äéóęÝôôáň\n"
-"źëá ôá äĺäďěÝíá óĺ áőôŢ ôç äéóęÝôôá čá ÷áčďýí"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "ĐńďóđÜčĺéá äéÜóůóçň đßíáęá ęáôáôěŢóĺůí"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "ĐńďâďëŢ đëçńďöďńéţí"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Óçěĺßď óýíäĺóçň"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "ĹđéëďăÝň"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "ÁëëáăŢ ěĺăÝčďőň"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Ěĺôáęßíçóç"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Ěďńöďđďßçóç"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Óýíäĺóç"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "ĐńďóčŢęç óôď RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "ĐńďóčŢęç óôď LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Áđďóýíäĺóç"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Áöáßńĺóç áđü ôď RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Áöáßńĺóç áđü ôď LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ôńďđďđďßçóç RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "×ńŢóç ăéá loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Äçěéďőńăßá íÝáň ęáôÜôěçóçň"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Áń÷Ţ óôďí ôďěÝá: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "ĚÝăĺčďň óĺ MB"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Ôýđďň óőóôŢěáôďň áń÷ĺßůí: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Óçěĺßď óýíäĺóçň: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Đńďôßěçóç: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Ěďńöďđďßçóç áń÷ĺßďő loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "ÁëëáăŢ ôýđďő ęáôÜôěçóçň"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Đďéü óýôçěá áń÷ĺßůí đńďôéěÜôĺ;"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ÁëëáăŢ áđü ext2 óĺ ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Đďý čÝëĺôĺ íá óőíäÝóĺôĺ ôď áń÷ĺßď loopback %s;"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Đďý čÝëĺôĺ íá óőíäÝóĺôĺ ôçí óőóęĺőŢ %s;"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Äĺí ěđďńţ íá áöáéńÝóů ôď óçěĺßď óýíäĺóçň ęáčţň áőôŢ ç ęáôÜôěçóç "
-"÷ńçóéěďđďéĺßôáé\n"
-"ăéá loopback. ÁöáéńÝóôĺ đńţôá ôď loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Őđďëďăéóěüň fat filesystem bounds"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "ĚĺôáâďëŢ ěĺăÝčďőň"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Áőôüň ď ôýđďň ęáôÜôěçóçň äĺí ěđďńĺß í' áëëÜîĺé ěÝăĺčďň."
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"ĐńÝđĺé íá ăßíĺé áíôßăńáöď áóöáëĺßáň üëůí ôůí äĺäďěÝíůí óĺ áőôŢ ôçí ęáôÜôěçóç"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"ĚĺôÜ ôçí áëëáăŢ ěĺăÝčďőň óôçí ęáôÜôěçóç %s, üëá ôá äĺäďěÝíá óĺ áőôŢí ôçí "
-"ęáôÜôěçóç čá ÷áčďýí"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "ĹđéëÝîôĺ ôď íÝď ěÝăĺčďň"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "ĚÝăĺčďň óĺ MB"
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Óĺ đďéüí äßóęď čÝëĺôĺ íá ěĺôáęéíçčĺßôĺ;"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "ÔďěÝáň"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Óĺ đďéüí ôďěÝá čÝëĺôĺ íá ěĺôáęéíçčĺßôĺ;"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Ěĺôáęßíçóç óĺ ĺîÝëéîç"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Ěĺôáęßíçóç ęáôÜôěçóçň óĺ ĺîÝëéîç..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "ĹđéëÝîôĺ Ýíá őđÜń÷ďí RAID óôď ďđďßď čá ăßíĺé ç đńďóčŢęç"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "íÝď"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "ĹđéëÝîôĺ Ýíá őđÜń÷ďí LVM óôď ďđďßď čá ăßíĺé ç đńďóčŢęç"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "üíďěá LVM;"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "ÁőôŢ ç ęáôÜôěçóç äĺí ěđďńĺß íá ÷ńçóéěďđďéçčĺß ăéá loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "źíďěá áń÷ĺßďő loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Đńáăěáôéęü üíďěá"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Ôď áń÷ĺßď ÷ńçóéěđďđďéĺßôáé Ţäç, ĺđéëÝîôĺ Ýíá Üëëď"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Ôď áń÷ĺßď őđÜń÷ĺé Ţäç. Íá ôď ÷ńçóéěďđďéŢóů;"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "ĐáńÜěĺôńďé ďäçăďý"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "óőóęĺőŢ"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "ĺđßđĺäď"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ěÝăĺčďň chunk"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Đńďóď÷Ţ: ÁőôŢ ç äéáäéęáóßá ĺßíáé ĺđéęßíäőíç."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Ôß ôýđďő partitioning;"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Óőăăíţěç, áëëÜ äĺí ěđďńţ íá äçěéďőńăŢóů ôďí ęáôÜëďăď /boot óĺ ęýëéíäńď "
-"ěĺăáëýôĺńď ôďő 1024.\n"
-"Ĺßôĺ ÷ńçóéěďđďéĺßôĺ LILO ęáé äĺí čá äďőëÝřĺé, ĺßôĺ äĺí ÷ńçóéěďđďéĺßôĺLILO "
-"ęáé äĺí ÷ńĺéÜćĺóôĺ ôď /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Ç ęáôÜôěçóç đďő ĺđéëÝîáôĺ ůň root (/) âńßóęĺôáé ěĺôÜ ôďí ęýëéíäńď 1024 ęáé\n"
-"äĺí Ý÷ĺôĺ ęáôÜôěçóç /boot.\n"
-"Áí óęďđĺýĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ LILO, đńďóčÝóôĺ ěßá ęáôÜôěçóç /boot."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"ĹđéëÝîáôĺ ěéá software RAID ęáôÜôěçóç ůň root (/).\n"
-"ĘáíÝíá đńüăńáěěá ĺęęßíçóçň äĺí ěđďńĺß íá ôď ÷ĺéńéóôĺß áőôü ÷ůńßň ěéá "
-"ęáôÜôěçóç /boot.\n"
-"Öńďíôßóôĺ ëďéđüí íá đńďóčÝóĺôĺ ěéá ęáôÜôěçóç /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ď đßíáęáň ęáôáôěŢóĺůí ôďő äßóęďő %s čá áđďčçęĺőôĺß óôďí äßóęď!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Áđáéôĺßôáé ĺđáíĺęęßíçóç ăéá íá ĺöáńěďóôďýí ďé áëëáăÝň"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"ĚĺôÜ ôçí ěďńöďđďßçóç ôçň ęáôÜôěçóçň %s, üëá ôá äĺäďěÝíá óĺ áőôŢí ôçí "
-"ęáôÜôěçóç čá ÷áčďýí"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Ěďńöďđďßçóç"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ěďńöďđďßçóç áń÷ĺßďő loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ěďńöďđďßçóç ęáôÜôěçóçň %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "áđďôő÷ßá mkraid"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Äĺí őđÜń÷ĺé áńęĺôüň ĺëĺýčĺńďň ÷ţńďň ăéá äçěéďőńăßá íÝůí ęáôáôěŢóĺůí"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Äĺí őđÜń÷ĺé áńęĺôüň ĺëĺýčĺńďň ÷ţńďň ăéá äçěéďőńăßá íÝůí ęáôáôěŢóĺůí"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "ÁíÜëőóç: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "ÓőóęĺőŢ: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Đéčáíü DOS ăńÜěěá äßóęďő: %s \n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Ôýđďň: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "źíďěá: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Áń÷Ţ: ôďěÝáň %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "ĚÝăĺčďň: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s ôďěĺßň"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Ęýëéíäńďň %d ĺţň ęýëéíäńďň %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "ĚďńöďđďéçěÝíďň\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Áěďńöďđďßçôďň\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "ÓőíäĺäĺěÝíďň\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Áń÷ĺßá loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"ĘáôÜôěçóç ĺęęßíçóçň ĺî ďńéóěďý\n"
-" (áđü MS-DOS, ü÷é áđü lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Ĺđßđĺäď %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "ĚÝăĺčďň chunk %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Äßóęďé RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "źíďěá áń÷ĺßďő loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Ďé đéčáíüôçôĺň ĺßíáé, áőôŢ ç ęáôÜôěçóç íá ĺßíáé\n"
-"ěéá ęáôÜôěçóç Ďäçăţí, čá đńÝđĺé đéčáíüôáôá\n"
-"íá ôçí áöŢóĺôĺ Ţóő÷ç.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ÁőôŢ ĺßíáé ĺéäéęŢ Bootstrap\n"
-"ęáôÜôěçóç ăéá\n"
-"dual-booting ôď óýóôçěÜ óáň.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "ĚÝăĺčďň: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ăĺůěĺôńßá: %s ęýëéíäńďé, %s ęĺöáëÝň, %s ôďěĺßň\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Đëçńďöďńßĺň: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Äßóęďé LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Ôýđďň đßíáęá ęáôáôěŢóĺůí: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "óôď bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "ĹđéëďăÝň: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Ôýđďň óőóôŢěáôďň áń÷ĺßůí: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Áőôü ôď óőíčçěáôéęü ĺßíáé đďëý áđëü (đńÝđĺé íá ĺßíáé ôďőëÜ÷éóôďí %d "
-"÷áńáęôŢńĺň ěáęńý)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Ôá óőíčçěáôéęÜ ĺßíáé áíüěďéá"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "ÁëëáăŢ ôýđďő ęáôÜôěçóçň"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Đáńáęáëţ ęÜíôĺ ęëéę óĺ ěéá ęáôÜôěçóç"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "ĹîőđçńĺôçôŢň DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ěďńöďđďßçóç ôďő %s áđÝôő÷ĺ"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "äĺí îÝńů đţň íá ěďńöďđďéŢóů ôď %s óĺ ôýđď %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "ôď fsck áđÝôő÷ĺ ěĺ ęůäéęü ĺîüäďő %d Ţ óŢěá %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "óöÜëěá ęáôÜ ôçí áđďóýíäĺóç ôďő %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "áđëü"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "ĺîőđçńĺôçôŢň"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-"Äĺí ěđďńĺßôĺ íá ÷ńçóéěďđďéŢóĺôĺ ôď JFS ăéá ęáôáôěŢóĺéň ěéęńüôĺńĺň áđü 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Äĺí ěđďńĺßôĺ íá ÷ńçóéěďđďéŢóĺôĺ ôď ReiserFS ăéá ęáôáôěŢóĺéň ěéęńüôĺńĺň áđü "
-"32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Ôď óçěĺßď óýíäĺóçň đńÝđĺé íá îĺęéíÜĺé ěĺ /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "ŐđÜń÷ĺé Ţäç ęáôÜôěçóç ěĺ óçěĺßď óýíäĺóçň %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Äĺí ěđďńĺßôĺ íá ÷ńçóéěďđďéŢóĺôĺ ěéá ęáôÜôěçóç LVM ăéá đńďóÜńôçóç %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-"Áőôüň ď ęáôÜëďăďň đńÝđĺé íá đáńáěĺßíĺé óôď ńéćéęü óýóôçěá áń÷ĺßůí (root)"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"×ńĺéÜćĺóôĺ Ýíá đńáăěáôéęü óýóôçěá áń÷ĺßůí (ext2, reiserfs) ăéá áőôü ôď "
-"óçěĺßď óýíäĺóçň\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Äĺí ěđďńĺßôĺ íá ÷ńçóéěďđďéŢóĺôĺ ěéá ęáôÜôěçóç LVM ăéá đńďóÜńôçóç %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-"Äĺí őđÜń÷ĺé áńęĺôüň ĺëĺýčĺńďň ÷ţńďň ăéá áőôüěáôç äçěéďőńăßá íÝůí ęáôáôěŢóĺůí"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "ÓöÜëěá ęáôÜ ôď Üíďéăěá ôďő %s ăéá ĺăăńáöŢ: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"ĐńďęëŢčçęĺ óöÜëěá - äĺí âńÝčçęáí óőóęĺőÝň óôéň ďđďßĺň íá ĺßíáé äőíáôŢç "
-"äçěéďőńăßá íÝůí óőóôçěÜôůí áń÷ĺßůí. Đáńáęáëţ ĺëĺăîôĺ ôď őëéęü óáň ăéáôçí "
-"áéôßá áőôďý ôďő đńďâëŢěáôďň"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Äĺí őđÜń÷ĺé ęáěßá ęáôÜôěçóç!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"ĐáńáđÜíů âëÝđĺôĺ Ýíáí ęáôÜëďăď ěĺ ôéň ęáôáôěŢóĺéň Linux đďő ĺíôďđßóôçęáí "
-"óôďí \n"
-"äßóęď óáň. Ěđďńĺßôĺ íá ęńáôŢóĺôĺ ôéň áőôüěáôĺň ĺđéëďăÝň, ĺßíáé ęáëÝň ăéá \n"
-"óőíçčéóěÝíç ÷ńŢóç. ĹÜí áëëÜîĺôĺ áőôÝň ôéň ĺđéëďăÝň, đńÝđĺé íá Ý÷ĺôĺ "
-"ôďőëÜ÷éóôďí\n"
-"ěéá âáóéęŢ ęáôÜôěçóç (root, \"/\"). Ěçí ĺđéëÝîĺôĺ ěéá đďëý ěéęńŢ ęáôÜôěçóç "
-"ăéáôß\n"
-"äĺí čá Ý÷ĺôĺ ÷ţńď ăéá ĺăęáôÜóôáóç ëďăéóěéęďý. ĹÜí čÝëĺôĺ íá áđďčçęĺýĺôĺ ôá "
-"äĺäďěÝíá\n"
-"óáň óĺ îĺ÷ůńéóôŢ ęáôÜôěçóç, đńÝđĺé íá ĺđéëÝîĺôĺ ěéá ęáôÜôěçóç ăéá \"/home"
-"\" (äőíáôüí\n"
-"ěüíď áí Ý÷ĺôĺ đáńáđÜíů áđü ěßá Linux ęáôÜôěçóç äéáčÝóéěç).\n"
-"\n"
-"\n"
-"ĐëçńďöďńéáęÜ, ęÜčĺ ęáôÜôěçóç áíáöÝńĺôáé ůň: \"źíďěá\", \"×ůńçôéęüôçôá\".\n"
-"\n"
-"\n"
-"Ôď üíďěá óçěáßíĺé ôá ĺîŢň: Ôýđďň äßóęďő, áńéčěüň äßóęďő, áńéčěüň "
-"ęáôÜôěçóçň \n"
-"ăéá đáńÜäĺéăěá, \"hda1\").\n"
-"\n"
-"\n"
-"Ď ôýđďň ĺßíáé \"hd\" ĺÜí đńüęĺéôáé ăéá äßóęď IDE ęáé \"sd\" ăéá SCSI äßóęď.\n"
-"\n"
-"\n"
-"Ď áńéčěüň äßóęďő ĺßíáé đÜíôá Ýíá ăńÜěěá ěĺôÜ ôď \"hd\" Ţ \"sd\". Ăéá ôďőň "
-"IDE \n"
-"äßóęďőň: \n"
-"\n"
-" * \"a\" ĺßíáé ď master äßóęďň óôďí đńţôď ĺëĺăęôŢ IDE,\n"
-"\n"
-" * \"b\" ĺßíáé ď slave äßóęďň óôďí đńţôď ĺëĺăęôŢ IDE,\n"
-"\n"
-" * \"c\" ĺßíáé ď master äßóęďň óôďí äĺýôĺńď ĺëĺăęôŢ IDE,\n"
-"\n"
-" * \"d\" ĺßíáé ď slave äßóęďň óôďí äĺýôĺńď ĺëĺăęôŢ IDE.\n"
-"\n"
-"\n"
-"Ăéá äßóęďőň SCSI, \"a\" ĺßíáé ď đńţôďň äßóęďň, \"b\" ĺßíáé ď äĺýôĺńďň äßóęďň "
-"ęëđ..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ěđďńĺßôĺ ôţńá íá ĺđéëÝîĺôĺ đďéÝň őđçńĺóßĺň čÝëĺôĺ íá îĺęéíďýí ęáôÜ ôçí \n"
-"ĺęęßíçóç.\n"
-"\n"
-"\n"
-"ĹÜí ěĺôáęéíŢóĺôĺ ôďí äńďěÝá ôďő đďíôéęéďý đÜíů óĺ ěßá áđü áőôÝň, \n"
-"čá ĺěöáíéóôĺß Ýíá ěđáëďíÜęé âďçčĺßáň đďő čá ĺîçăĺß ôďí ńüëď ôçň.\n"
-"\n"
-"\n"
-"ĐńďóÝîôĺ áőôü ôď âŢěá ĺÜí óęďđĺýĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ óôď óýóôçěá óáí \n"
-"ĺîőđçńĺôçôŢ. Äĺí čá čÝëáôĺ íá îĺęéíŢóĺôĺ őđçńĺóßĺň đďő äĺí ÷ńĺéÜćĺóôĺ, \n"
-"äéüôé ďńéóěÝíĺň őđçńĺóßĺň ĺěđĺńéÝ÷ďőí ęéíäýíďőň áóöáëĺßáň ĺÜí őđÜń÷ďőí \n"
-"óĺ ĺîőđçńĺôçôŢ.\n"
-"ĂĺíéęÜ, ĺđéëÝîôĺ ěüíď ôéň őđçńĺóßĺň đďő ÷ńĺéÜćĺóôĺ đńáăěáôéęÜ."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Óĺ áőôü ôď óçěĺßď, đńÝđĺé íá áđďöáóßóĺôĺ đďý čá ĺăęáôáóôŢóĺôĺ ôď GNU/Linux\n"
-"óôďí óęëçńü óáň äßóęď. ĹÜí ĺßíáé Üäĺéďň Ţ ĺÜí Ýíá Üëëď ëĺéôďőńăéęü "
-"÷ńçóéěďđďéĺß\n"
-"üëďí ôďí ÷ţńď, čá ÷ńĺéáóôĺß íá ôďí ęáôáôěŢóĺôĺ, äçëáäŢ íá ęÜíĺôĺ Ýíáí ëďăéęü "
-"äéá÷ůńéóěü\n"
-"ôďő äßóęďő óĺ äéáěĺńßóěáôá, ţóôĺ íá äçěéďőńăŢóĺôĺ ÷ţńď ăéá ôçí ĺăęáôÜóôáóç "
-"ôďő Mandrake Linux.\n"
-"\n"
-"\n"
-"ĹđĺéäŢ ç ęáôÜôěçóç ĺßíáé óőíŢčůň ěéá ěç áíôéóôńĺđôŢ ĺńăáóßá, ěđďńĺß íá ĺßíáé "
-"äýóęďëç ęáé \n"
-"áă÷ůôéęŢ ăéá Ýíáí áń÷Üńéď ÷ńŢóôç.\n"
-"Áőôü ôď đńüăńáěěá áđëďđďéĺß ôçí äéáäéęáóßá. Đńéí áń÷ßóĺôĺ, đáńáęáëţ "
-"óőěâďőëĺőčĺßôĺ ôď \n"
-"ĺă÷ĺéńßäéď ÷ńŢóçň ęáé ěçí âéáóôĺßôĺ.\n"
-"\n"
-"\n"
-"Čá ÷ńĺéáóôĺßôĺ ôďőëÜ÷éóôďí äýď ęáôáôěŢóĺéň. Ěßá ăéá ôď ëĺéôďőńăéęü óýóôçěá "
-"ęáé Üëëç ěßá ăéá \n"
-"ôçí ĺéęďíéęŢ ěíŢěç (swap).\n"
-"\n"
-"\n"
-"ĹÜí őđÜń÷ďőí Ţäç ęáôáôěŢóĺéň áđü đńďçăďýěĺíç ĺăęáôÜóôáóç Ţ áđü Üëëď "
-"ĺńăáëĺßď, čá ÷ńĺéáóôĺß\n"
-"áđëţň íá ĺđéëÝîĺôĺ óĺ đďéÝň áđü áőôÝň čá ĺăęáôáóôŢóĺôĺ ôď Linux óáň.\n"
-"\n"
-"\n"
-"ĹÜí äĺí őđÜń÷ďőí ęáôáôěŢóĺéň, đńÝđĺé íá ôéň äçěéďőńăŢóĺôĺ ěĺ ôď đáńáđÜíů "
-"ĺńăáëÝéď. ÁíÜëďăá ěĺ \n"
-"ôçí ęáôÜóôáóç ôďő äßóęďő óáň, őđÜń÷ďőí äéÜöďńĺň ëýóĺéň:\n"
-"\n"
-"* ×ńŢóç őđÜń÷ďíôůí ęáôáôěŢóĺůí: ÂńÝčçęáí ěßá Ţ đĺńéóóüôĺńĺň ęáôáôěŢóĺéň "
-"Linux óôď óýóôçěÜ óáň.\n"
-" ĹÜí čÝëĺôĺ íá ôéň ęńáôŢóĺôĺ, ĺđéëÝîôĺ áőôŢí ôçí ĺđéëďăŢ.\n"
-"\n"
-"\n"
-"* ÄéáăńáöŢ ďëüęëçńďő ôďő äßóęďő: ĹÜí čÝëĺôĺ íá äéáăńÜřĺôĺ üëá ôá äĺäďěÝíá "
-"ęáé üëĺň ôéň őđÜń÷ďőóĺň\n"
-" ęáôáôěŢóĺéň ęáé íá ôá áíéęáôáóôŢóĺôĺ ěĺ ôď íÝď óáň Mandrake Linux óýóôçěá, "
-"ĺđéëÝîôĺ áőôŢí ôçí \n"
-" ĺđéëďăŢ. ĐŃĎÓĎ×Ç: Äĺí őđÜń÷ĺé ôńüđďň íá áíôéóôńÝřĺôĺ ôçí äéáäéęáóßá\n"
-" áí áëëÜîĺôĺ ăíţěç áńăüôĺńá! źëá ôá äĺäďěÝíá čá ęáôáóôńáöďýí!\n"
-"\n"
-"\n"
-"* ×ńŢóç ĺëĺýčĺńďő ÷ţńďő óôçí ęáôÜôěçóç ôůí Windows: ĹÜí Ý÷ĺôĺ ĺăęáôĺóôçěÝíá "
-"ôá Microsoft Windows\n"
-" ęáé ęáôáëáěâÜíďőí üëď ôďí ÷ţńď ôďő äßóęďő, đńÝđĺé íá äçěéďőńńăŢóĺôĺ "
-"ĺëÝőčĺńď ÷ţńď ăéá ôď Linux.\n"
-" Ăéá íá ăßíĺé áőôü, ěđďńĺßôĺ ĺßôĺ íá äéáăńÜřĺôĺ ôçí ęáôÜôěçóç ôůí Windows "
-"ęáé üëá ôá äĺäďěÝíá ôďőň\n"
-" (äĺň \"ÄéáăńáöŢ ďëüęëçńďő ôďő äßóęďő\" Ţ \"Ĺéäéęüň\") Ţ íá óőńńéęíţóĺôĺ "
-"ôçí ęáôÜôěçóç ôůí Windows.\n"
-" Ç óőńńßęíůóç ěđďńĺß íá ăßíĺé ÷ůńßň áđţëĺéá äĺäďěÝíůí. ÁőôŢ ç ëýóç "
-"óőíßóôáôáé ĺÜí čÝëĺôĺ íá ÷ńçóéěďđďéĺßôĺ\n"
-" Microsoft Windows ęáé Mandrake Linux óôďí ßäéď őđďëďăéóôŢ.\n"
-"\n"
-"\n"
-" Đńéí áđďöáóßóĺôĺ íá óőńńéęíţóĺôĺ ôďí äßóęď, đńÝđĺé íá ęáôáëÜâĺôĺ üôé ěĺôÜ "
-"áđü áőôŢí ôçí äéáäéęáóßá\n"
-" čá Ý÷ĺôĺ ëéăüôĺńď ÷ţńď äéáčÝóéěď áđü ôá Windows ăéá áđďčŢęĺőóç äĺäďěÝíůí Ţ "
-"ĺăęáôÜóôáóç ĺöáńěďăţí.\n"
-"\n"
-"\n"
-"* Ĺéäéęüň: ĹÜí čÝëĺôĺ íá ęáôáôěŢóĺôĺ ĺóĺßň ôďí äßóęď óáň, ÷ůńßň áőôüěáôĺň "
-"áđďöÜóĺéň. Ĺßíáé ěéá \n"
-" ĺđéëďăŢ ěĺ đďëëÝň äőíáôüôçôĺň áëëÜ ĺđéęßíäőíç, ěéá ęáé ěđďńĺßôĺ íá ÷Üóĺôĺ "
-"üëá ôá äĺäďěÝíá óáň\n"
-" ĺÜí ęÜíĺôĺ ęÜđďéď ëÜčďň. Âĺâáéůčĺßôĺ üôé îÝńĺôĺ ôé ęÜíĺôĺ đńůôďý "
-"đńď÷ůńŢóĺôĺ."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Ďé íÝĺň ęáôáôěŢóĺéň đńÝđĺé íá öďńěáńéóôďýí (äçëáäŢ íá äçěéďőńăçčĺß Ýíá "
-"óýóôçěá\n"
-"áń÷ĺßůí) đńůôďý ÷ńçóéěďđďéçčďýí.\n"
-"\n"
-"\n"
-"Ěđďńĺßôĺ ĺđßóçň íá öďńěÜńĺôĺ ęÜđďéĺň đńďűđÜń÷ďőóĺň ęáôáôěŢóĺéň ăéá íá "
-"äéáăńÜřĺôĺ \n"
-"ôá äĺäďěÝíá ôďőň. ĹÜí čÝëĺôĺ ęÜôé ôÝôďéď, đáńáęáëţ ĺđéëÝîôĺ ôéň ęáôáôěŢóĺéň "
-"đďő \n"
-"čÝëĺôĺ íá öďńěÜńĺôĺ.\n"
-"\n"
-"\n"
-"Óçěĺéţóôĺ üôé äĺí ĺßíáé áđáńáßôçôď íá öďńěÜńĺôĺ üëĺň ôéň đńďűđÜń÷ďőóĺň "
-"ęáôáôěŢóĺéň.\n"
-"ĐńÝđĺé íá öďńěÜńĺôĺ ôéň ęáôáôěŢóĺéň đďő đĺńéÝ÷ďőí ôď ëĺéôďőńăéęü óýóôçěá "
-"(üđůň ďé \n"
-"\"/\", \"/usr\" ęáé \"/var\"), áëëÜ äĺí ÷ńĺéÜćĺôáé íá öďńěÜńĺôĺ ęáôáôěŢóĺéň "
-"đďő đĺńéÝ÷ďőí \n"
-"äĺäďěÝíá đďő čÝëĺôĺ íá ęńáôŢóĺôĺ (óőíŢčůň ç \"/home\").\n"
-"\n"
-"\n"
-"Đáńáęáëţ íá ĺßóôĺ đńďóĺęôéęďß ęáčţň ěĺôÜ áđü áőôŢí ôçí äéáäéęáóßá üëá ôá "
-"äĺäďěÝíá \n"
-"óôéň ęáôáôěŢóĺéň áőôÝň čá ÷áčďýí áěĺôÜęëçôá.\n"
-"\n"
-"\n"
-"ĐáôŢóôĺ \"OK\" üôáí ĺßóôĺ Ýôďéěďé íá îĺęéíŢóĺôĺ ôçí äéáäéęáóßá.\n"
-"\n"
-"\n"
-"ĐáôŢóôĺ \"Áęýńůóç\" ĺÜí čÝëĺôĺ íá áëëÜîĺôĺ ôéň ĺđéëďăÝň óáň ęáé íá "
-"÷ńçóéěďđďéŢóĺôĺ \n"
-"Üëëĺň ęáôáôěŢóĺéň ăéá ôçí ĺăęáôÜóôáóç ôďő Mandrake Linux."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Ôď íÝď óáň ëĺéôďőńăéęü óýóôçěá Mandrake Linux ĺăęáčßóôáôáé.\n"
-"ÁőôŢ ç äéáäéęáóßá čá đÜńĺé ęÜđďéá ţńá, áíÜëďăá ěĺ ôď ěÝăĺčďň \n"
-"ôçň ĺăęáôóôáóçň đďő ĺđéëÝîáôĺ ęáé ôçí ôá÷ýôçôá ôďő őđďëďăéóôŢ óáň.\n"
-"\n"
-"\n"
-"Đáńáęáëţ đĺńéěÝíĺôĺ őđďěďíĺôéęÜ."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Óĺ áőôü ôď óçěĺßď, čá ÷ńĺéáóôĺß íá ĺđéëÝîĺôĺ óĺ đďéÝň ęáôáôěŢóĺéň čá "
-"ĺăęáôáóôŢóĺôĺ \n"
-"ôď Mandrake Linux. ĹÜí đńďűđÜń÷ďőí ęáôáôěŢóĺéň, áđü đáëáéüôĺńç ĺăęáôÜóôáóç Ţ "
-"áđü \n"
-"Üëëď ĺńăáëĺßď, ěđďńĺßôĺ íá ôéň ÷ńçóéěďđďéŢóĺôĺ. Áëëéţň, čá đńÝđĺé íá "
-"ďńßóĺôĺ \n"
-"íÝĺň ęáôáôěŢóĺéň.\n"
-"\n"
-"\n"
-"Ăéá íá äçěéďőńăŢóĺôĺ ęáôáôěŢóĺéň, đńÝđĺé đńţôá íá ĺđéëÝîĺôĺ óęëçńü äßóęď, "
-"ęÜíďíôáň\n"
-"ęëéę ěĺ ôď đďíôßęé óôď \"hda\" óôďí đńţôď IDE äßóęď, \"hdb\" óôďí äĺýôĺńď "
-"IDE, \"sda\"\n"
-"óôďí đńţôď SCSI äßóęď ęëđ\n"
-"\n"
-"\n"
-"Ăéá íá ęáôáôěŢóĺôĺ äßóęď óáň, ěđďńĺßôĺ íá ĺđéëÝîĺôĺ:\n"
-"\n"
-" * ĐëŢńçň äéáăńáöŢ: áőôŢ ç ĺđéëďăŢ äéáăńÜöĺé üëĺň ôéň ęáôáôěŢóĺéň ôďő \n"
-" ĺđéëĺăěÝíďő äßóęďő.\n"
-"\n"
-"\n"
-" * Áőôüěáôç ĺđéëďăŢ: ÁőôŢ ç ĺđéëďăŢ äçěéďőńăĺß áőôüěáôá ęáôáôěŢóĺéň \n"
-" ext2 ęáé swap óôďí ĺëĺýčĺńď ÷ţńď ôďő äßóęďő.\n"
-"\n"
-"\n"
-" * ÄéÜóůóç đßíáęá ęáôáôěŢóĺůí: ĹÜí ď đßíáęáň ęáôáôěŢóĺůí ĺßíáé "
-"ęáôĺóôńáěÝíďň,\n"
-" ěđďńĺßôĺ íá đńďóđáčŢóĺôĺ íá ôďí ĺđáíáöÝńĺôĺ. Đáńáęáëţ íá ĺßóôĺ "
-"đńďóĺęôéęďß\n"
-" ęáé íá čőěÜóôĺ üôé ěđďńĺß íá áđďôý÷ĺé.\n"
-"\n"
-"\n"
-" * Áęýńůóç: Ăéá íá áęőńţóĺôĺ ü,ôé Ý÷ĺôĺ ęÜíĺé.\n"
-"\n"
-"\n"
-" * Ĺđáíáöüńôůóç: Ăéá íá áęőńţóĺôĺ ü,ôé Ý÷ĺôĺ ęÜíĺé ęáé íá îáíáöďńôţóĺôĺ "
-"ôďí \n"
-" áń÷éęü óáň đßíáęá ęáôáôěŢóĺůí.\n"
-"\n"
-"\n"
-" * ĚÜăďň: ĹÜí čÝëĺôĺ íá äçěéďőńăçčďýí ôĺëÝéůň áőôüěáôá ďé ęáôáôěŢóĺéň. "
-"Óőíéóôţěĺíç \n"
-" ĺđéëďăŢ ĺÜí äĺí Ý÷ĺôĺ ęáëŢ ăíţóç ôçň äéáäéęáóßáň.\n"
-"\n"
-"\n"
-" * Ĺđáíáöüńôůóç áđü äéóęÝôôá: ĹÜí ĺß÷áôĺ áđďčçęĺýóĺé ôďí đßíáęá "
-"ęáôáôěŢóĺůí óĺ äéóęÝôôá\n"
-" óĺ ęÜđďéá đńďçăďýěĺíç ĺăęáôÜóôáóç, ěđďńĺßôĺ íá ôďí ĺđáíáöÝńĺôĺ. \n"
-"\n"
-"\n"
-" * ÁđďčŢęĺőóç óĺ äéóęÝôôá: Ăéá íá óţóĺôĺ ôďí đßíáęá ęáôáôěŢóĺůí óĺ "
-"äéóęÝôôá, ţóôĺ íá \n"
-" ěđďńĺßôĺ íá ôďí ĺđáíáöÝńĺôĺ. Ç ÷ńŢóç áőôŢň ôçň ĺđéëďăŢň óőíßóôáôáé.\n"
-"\n"
-"\n"
-" * ÔÝëďň: źôáí ôĺëĺéţóĺôĺ ôçí ęáôÜôěçóç, ĺđéëÝîôĺ áőôü ăéá íá ęÜíĺôĺ ôéň "
-"áëëáăÝň ěüíéěĺň.\n"
-"\n"
-"\n"
-"ĐëçńďöďńéáęÜ, ěđďńĺßôĺ íá ĺđéëÝîĺôĺ üëĺň ôéň ĺđéëďăÝň ęáé ěÝóů "
-"đëçęôńďëďăßďő: \n"
-"Ěĺôáęéíçčĺßôĺ óôéň ęáôáôěŢóĺéň ÷ńçóéěďđďéţíôáň ôď đëŢęôńď Tab ęáé ôá "
-"âĺëÜęéá.\n"
-"\n"
-"\n"
-"źôáí Ý÷ĺôĺ ĺđéëÝîĺé ěéá ęáôÜôěçóç, ěđďńĺßôĺ íá đáôŢóĺôĺ:\n"
-"\n"
-" * Ctrl-c ăéá äçěéďőńăßá ęáôÜôěçóçň (üôáí Ý÷ĺôĺ ĺđéëÝîĺé Üäĺéď "
-"÷ţńď)\n"
-"\n"
-" * Ctrl-d ăéá äéáăńáöŢ ęáôÜôěçóçň\n"
-"\n"
-" * Ctrl-m ăéá ďńéóěü óçěĺßďő óýíäĺóçň \n"
-"\n"
-" \n"
-"Ĺáí ęÜíĺôĺ ĺăęáôÜóôáóç óĺ Ýíá PPC ěç÷Üíçěá, čá čÝëĺôĺ íá äçěéďőńăŢóĺôĺ ěéá "
-"ěéęńŢ HFS 'bootstrap' ęáôÜôěçóç ôďőëÜ÷éóôďí 1Ě ăéá ÷ńŢóç\n"
-"áđü ôďí yaboot bootloader. ĹÜí óęďđĺýĺôĺ íá ęÜíĺôĺ ôçí ęáôÜôěçóç ěĺăáëýôĺńç, "
-"đ.÷. 50ĚÂ, ßóůň ôçí âńĺßôĺ ÷ńŢóéěç ăéá áđďčŢęĺőóç \n"
-"ĺíüň đőńŢíá ęáé ramdisk image ăéá ĺđßăďőóĺň ęáôáóôÜóĺéň."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Đĺńéóóüôĺńĺň ôůí ěßá ęáôáôěŢóĺéň Windows âńÝčçęáí óôďí äßóęď óáň. Đáńáęáëţ \n"
-"ĺđéëÝîôĺ đďéÜ čÝëĺôĺ íá óőńńéęíţóĺôĺ ăéá íá ĺăęáôáóôŢóĺôĺ ôď Mandrake "
-"Linux.\n"
-"\n"
-"\n"
-"ĐëçńďöďńéáęÜ, ęÜčĺ ęáôÜôěçóç áíáöÝńĺôáé ůň: \"źíďěá Linux\", \"źíďěá Windows"
-"\", \"×ůńçôéęüôçôá\".\n"
-"\n"
-"\n"
-"Ôď üíďěá Linux óçěáßíĺé ôá ĺîŢň: Ôýđďň äßóęďő, áńéčěüň äßóęďő, áńéčěüň "
-"ęáôÜôěçóçň \n"
-"ăéá đáńÜäĺéăěá, \"hda1\").\n"
-"\n"
-"\n"
-"Ď ôýđďň ĺßíáé \"hd\" ĺÜí đńüęĺéôáé ăéá äßóęď IDE ęáé \"sd\" ăéá SCSI äßóęď.\n"
-"\n"
-"\n"
-"Ď áńéčěüň äßóęďő ĺßíáé đÜíôá Ýíá ăńÜěěá ěĺôÜ ôď \"hd\" Ţ \"sd\". Ăéá ôďőň "
-"IDE \n"
-"äßóęďőň: \n"
-"\n"
-" * \"a\" ĺßíáé ď master äßóęďň óôďí đńţôď ĺëĺăęôŢ IDE,\n"
-"\n"
-" * \"b\" ĺßíáé ď slave äßóęďň óôďí đńţôď ĺëĺăęôŢ IDE,\n"
-"\n"
-" * \"c\" ĺßíáé ď master äßóęďň óôďí äĺýôĺńď ĺëĺăęôŢ IDE,\n"
-"\n"
-" * \"d\" ĺßíáé ď slave äßóęďň óôďí äĺýôĺńď ĺëĺăęôŢ IDE.\n"
-"\n"
-"\n"
-"Ăéá äßóęďőň SCSI, \"a\" ĺßíáé ď đńţôďň äßóęďň, \"b\" ĺßíáé ď äĺýôĺńďň äßóęďň "
-"ęëđ...\n"
-"\n"
-"\n"
-"Ôď üíďěá Windows ĺßíáé ôď ăńÜěěá ôçň ęáôÜôěçóçň üđůň öáßíĺôáé áđü ôá "
-"Windows\n"
-"(ď đńţôďň äßóęďň Ţ ęáôÜôěçóç ëÝăĺôáé \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Đáńáęáëţ đĺńéěÝíĺôĺ. ÁőôŢ ç äéáäéęáóßá ěđďńĺß íá đÜńĺé ěĺńéęÜ ëĺđôÜ."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Đáńáęáëţ ĺđéëÝîôĺ \"ĹăęáôÜóôáóç\" ĺÜí äĺí őđÜń÷ĺé ĺăęáôĺóôçěÝíç đáëáéüôĺńç "
-"Ýęäďóç ôďő Mandrake Linux\n"
-"Ţ ĺÜí čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ đĺńéóóüôĺńá ôďő ĺíüň ëĺéôďőńăéęÜ óőóôŢěáôá.\n"
-"\n"
-"\n"
-"ĹđéëÝîôĺ \"ÁíáâÜčěéóç\" ĺÜí čÝëĺôĺ íá áíáâáčěßóĺôĺ ěéá đńďűđÜń÷ďőóá "
-"ĺăęáôÜóôáóç ôďő Mandrake Linux\n"
-"\n"
-"\n"
-"ÁíÜëďăá ěĺ ôéň ăíţóĺéň óáň óôď GNU/Linux, ěđďńĺßôĺ íá ĺđéëÝîĺôĺ Ýíá áđü ôá "
-"đáńáęÜôů ĺđßđĺäá ĺăęáôÜóôáóçň\n"
-"Ţ áíáâÜčěéóçň ôďő Mandrake Linux:\n"
-"\n"
-"* Óőíéóôţěĺíď: ĹÜí äĺí Ý÷ĺôĺ îáíáĺăęáôáóôŢóĺé đďôÝ Ýíá GNU/Linux óýóôçěá. Ç "
-"ĺăęáôÜóôáóç čá ĺßíáé \n"
-" đďëý ĺýęďëç ęáé čá óáň ćçôçčĺß íá áđáíôŢóĺôĺ ëßăĺň ĺńůôŢóĺéň.\n"
-"\n"
-"\n"
-"* ĐńďóáńěďóěÝíç: ĹÜí ĺßóôĺ ĺîďéęĺéůěÝíďň ěĺ ôď GNU/Linux, ěđďńĺßôĺ íá "
-"ĺđéëÝîĺôĺ ôçí âáóéęŢ ÷ńŢóç\n"
-" (ĺîőđçńĺôçôŢň, óôáčěüň ĺńăáóßáň) ôďő óőóôŢěáôüň óáň. Čá ÷ńĺéáóôĺß íá "
-"áđáíôŢóĺôĺ óĺ đĺńéóóüôĺńĺň\n"
-" ĺńůôŢóĺéň, ďđüôĺ čá đńÝđĺé íá Ý÷ĺôĺ ęÜđďéĺň âáóéęÝň ăíţóĺéň ó÷ĺôéęÜ ěĺ ôçí "
-"ëĺéôďőńăßá ôďő GNU/Linux.\n"
-"\n"
-"\n"
-"* Ĺéäéęüň: ĹÜí Ý÷ĺôĺ ĺěđĺéńßá ěĺ ôď GNU/Linux. źđůň ęáé đáńáđÜíů, ěđďńĺßôĺ "
-"íá ĺđéëÝîĺôĺ ôçí âáóéęŢ\n"
-" ÷ńŢóç ôďő óőóôŢěáôďň. Čá ěđďńÝóĺôĺ ĺđßóçň íá đńďóáńěüóĺôĺ ôď óýóôçěá óôéň "
-"áíÜăęĺň óáň ëĺđôďěĺńţň,\n"
-" áëëÜ čá ÷ńĺéáóôĺß íá áđáíôŢóĺôĺ óĺ ĺîĺéäéęĺőěÝíĺň ĺńůôŢóĺéň đďő "
-"đńďűđďčÝôďőí ĺîĺéäéęĺőěÝíĺň ăíţóĺéň.\n"
-" Âĺâáéůčĺßôĺ üôé îÝńĺôĺ ôé ęÜíĺôĺ đńůôďý ĺđéëÝîĺôĺ áőôŢí ôçí ĺăęáôÜóôáóç."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Đáńáęáëţ ĺđéëÝîôĺ ôçí ęáôÜëëçëç čýńá. Ăéá đáńÜäĺéăěá,\n"
-"ç COM1 óôá Windows ďíďěÜćĺôáé ttyS0 óôď GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"Ôď LILO ęáé ôď Grub ĺßíáé đńďăńÜěěáôá ĺęęßíçóçň: Ěđďńďýí íá ĺęęéíŢóďőí \n"
-"ôď GNU/Linux Ţ ďđďéďäŢđďôĺ Üëëď ëĺéôďőńăéęü őđÜń÷ĺé óôď óýóôçěÜ óáň. "
-"ĘáíďíéęÜ, \n"
-"ôá ĺđéđëÝďí ëĺéôďőńăéęÜ đńďóäéďńßćďíôáé ęáé ńőčěßćďíôáé óůóôÜ. ĹÜí áőôü "
-"äĺí \n"
-"óőíÝâç, ěđďńĺßôĺ íá đńďóčÝóĺôĺ ĺđéđëÝďí ĺđéëďăÝň óĺ áőôŢí ôçí ďčüíç. \n"
-"ĐńďóÝîôĺ íá ĺđéëÝîĺôĺ ôéň óůóôÝň đáńáěÝôńďőň.\n"
-"\n"
-"Ěđďńĺßôĺ ĺđßóçň íá áđďęëĺßóĺôĺ ôçí đńüóâáóç óĺ Üëëá ëĺéôďőńăéęÜ óőóôŢěáôá "
-"áöáéńţíôáň\n"
-"ôéň áíôßóôďé÷ĺň ĺđéëďăÝň. Óĺ áőôŢí üěůň ôçí đĺńßđôůóç, čá ÷ńĺéáóôĺßôĺ "
-"äéóęÝôôá ĺęęßíçóçň\n"
-"ăéá íá ôá ÷ńçóéěďđďéŢóĺôĺ!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"ĐńÝđĺé íá đńďóäéďńßóĺôĺ đďý čÝëĺôĺ íá ĺăęáôáóôáčďýí ďé \n"
-"đëçńďöďńßĺň đďő ĺßíáé áđáńáßôçôĺň ăéá ôçí ĺęęßíçóç ôďő \n"
-"GNU/Linux.\n"
-"\n"
-"\n"
-"Ĺęôüň ęáé áí îÝńĺôĺ đďëý ęáëÜ ôé ęÜíĺôĺ, ĺđéëÝîôĺ \"Đńţôďň ôďěÝáň\n"
-"ôďő äßóęďő (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Ôď DrakX čá đńďóđáčŢóĺé íá ĺíôďđßóĺé đńďóáńěďăĺßň SCSI ôýđďő PCI.\n"
-"ĹÜí ôď DrakX ĺíôďđßóĺé Ýíáí đńďóáńěďăÝá đďő îÝńĺé đţň íá ôďí "
-"÷ńçóéěďđďéŢóĺé,\n"
-"čá ĺăęáôáóôŢóĺé áőôüěáôá ôďí ęáôÜëëçëď ďäçăü\n"
-"\n"
-"\n"
-"ĹÜí Ý÷ĺôĺ đńďóáńěďăÝá SCSI ôýđďő ISA, ęÜđďéďí ěŢ áíáăíůńßóéěď PCI "
-"đńďóáńěďăÝá \n"
-"Ţ äĺí Ý÷ĺôĺ ęáíÝíáí đńďóáńěďăÝá SCSI, ôď DrakX čá óáň ńůôŢóĺé ĺÜí Ý÷ĺôĺ "
-"ęÜđďéďí \n"
-"đńďóáńěďăÝá SCSI óôď óýóôçěÜ óáň. ĹÜí äĺí Ý÷ĺôĺ, đáôŢóôĺ áđëţň 'ź÷é'. ĹÜí "
-"đáôŢóĺôĺ\n"
-"'Íáé', čá óáň ćçôçčĺß íá áđéëÝîĺôĺ ôďí ôýđď ôďő áđü Ýíáí ęáôÜëďăď.\n"
-"\n"
-"\n"
-"ĹÜí ĺđéëÝîĺôĺ đńďóáńěďăÝá, ôď DrakX čá óáň ńůôŢóĺé ĺÜí čÝëĺôĺ íá ďńßóĺôĺ "
-"ĺđéëďăÝň.\n"
-"ÓőíŢčůň, áöŢíďíôáň ôď DrakX íá ńőčěßóĺé áőôüěáôá ôďí đńďóáńěďăÝá, äĺí čá "
-"Ý÷ĺôĺ đńüâëçěá.\n"
-"\n"
-"\n"
-"Óĺ áíôßčĺôç đĺńßđôůóç, čá đńÝđĺé íá äţóĺôĺ ĺđéëďăÝň ăéá ôďí ďäçăü. \n"
-"Óőěâďőëĺőôĺßôĺ ôďí Ďäçăü ĹăęáôÜóôáóçň ăéá ôď đţň čá âńĺßôĺ áőôÝň ôéň \n"
-"đëçńďöďńßĺň áđü ôçí ĺăęáôÜóôáóç ôůí Windows (áí őđÜń÷ĺé), áđü ôçí "
-"ôĺęěçńßůóç\n"
-"ôďő őëéęďý Ţ áđü ôçí éóôďóĺëßäá ôďő ęáôáóęĺőáóôŢ (áí Ý÷ĺôĺ đńüóâáóç óôď "
-"Internet)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-" - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-" - Image: This would be the name of the kernel to boot. Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-" - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-" \n"
-" - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse. The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-" - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-" - Initrd-size: The default ramdisk size is generally 4096 bytes. If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-" - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'. You can override this "
-"option here.\n"
-"\n"
-"\n"
-" - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-" - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt. This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-" - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-" - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-" - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot. The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-" - Kernel Boot Timeout: This timeout is similar to the LILO boot delay. "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-" - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-" - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-" - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"ĹđéëÝîôĺ ôďí äßóęď đďő čÝëĺôĺ íá äéáăńÜřĺôĺ ăéá íá ĺăęáôáóôŢóĺôĺ \n"
-"ôçí íÝá ęáôÜôěçóç Mandrake Linux. ĐŃĎÓĎ×Ç: źëá ôá äĺäďěÝíá čá äéáăńáöďýí\n"
-"ęáé čá ĺßíáé áäýíáôç ç ĺđáíáöďńÜ ôďőň."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"ĐáôŢóôĺ \"OK\" ĺÜí čÝëĺôĺ íá äéáăńÜřĺôĺ üëá ôá äĺäďěÝíá ęáé ôéň \n"
-"ęáôáôěŢóĺéň óĺ áőôüí ôďí äßóęď. Đńďóď÷Ţ, ěĺôÜ áđü áőôü äĺí čá ěđďńĺßôĺ \n"
-"íá ĺđáíáöÝńĺôĺ ďđďéáäŢđďôĺ äĺäďěÝíá đďő âńßóęďíôáé áőôŢ ôç óôéăěŢ óôďí \n"
-"äßóęď, óőěđĺńéëáěâáíďěÝíůí ęáé ďđďéďíäŢđďôĺ äĺäďěÝíůí áđü ôá Windows.\n"
-"\n"
-"\n"
-"ĐáôŢóôĺ \"Áęýńůóç\" ăéá íá áęőńţóĺôĺ áőôŢí ôçí äéáäéęáóßá ÷ůńßň íá ÷Üóĺôĺ \n"
-"äĺäďěÝíá ęáé ęáôáôěŢóĺéň đďő âńßóęďíôáé óôďí äßóęď."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"¸÷ĺôĺ ĺđéëÝîĺé ôďőň đáńáęÜôů ĺîőđçńĺôçôÝň: %s\n"
-"\n"
-"\n"
-"Áőôďß ďé ĺîőđçńĺôçôÝň ĺíĺńăďđďéďýíôáé ĺî' ďńéóěďý. Äĺí Ý÷ďőí ęÜđďéá ăíůóôÜ "
-"đńďâëŢěáôá\n"
-"áóöáëĺßáň, áëëÜ ěđďńĺß íá âńĺčďýí ęÜđďéá ęáéíďýńéá. Óĺ áőôŢí ôçí đĺńßđôůóç, "
-"đńÝđĺé íá áíáâáčěßóĺôĺ\n"
-"ôď óőíôďěüôĺńď äőíáôüí.\n"
-"\n"
-"\n"
-"ČÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ áőôďýň ôďőň ĺîőđçńĺôçôÝň;\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Äĺí ěđďńţ íá ÷ńçóéěďđďéŢóů broadcast ÷ůńßň NIS domain"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ĹéóÜăĺôĺ ěéá FAT ěďńöďđďéçěÝíç äéóęÝôôá óôďí ďäçăü %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "ÁőôŢ ç äéóęÝôôá äĺí ĺßíáé ěďńöďđďéçěÝíç FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Ăéá íá ÷ńçóéěďđďéŢóĺôĺ áőôŢí ôçí áđďčçęĺőěÝíç ĺđéëďăŢ đáęÝôůí, îĺęéíŢóôĺ ôçí "
-"ĺăęáôÜóôáóç ěĺ ``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "ÓöÜëěá ęáôÜ ôçí áíÜăíůóç ôďő áń÷ĺßďő %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"¸íá ěÝńďň ôďő őëéęďý óáň ÷ńĺéÜćĺôáé ``éäéüęôçôďőň'' ďäçăďýň ăéá íá "
-"ëĺéôďőńăŢóĺé.\n"
-"Ěđďńĺßôĺ íá âńĺßôĺ ó÷ĺôéęÝň đëçńďöďńßĺň óôď: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"ĐńÝđĺé íá Ý÷ĺôĺ ěéá âáóéęŢ ęáôÜôěçóç.\n"
-"ÄçěéoőńăŢóôĺ Ţ ĺđéëÝîôĺ ěéá ęáôÜôěçóç.\n"
-"ĚĺôÜ ďńßóôĺ ůň óçěĺßď óýíäĺóçň ôď `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "ĐńÝđĺé íá Ý÷ĺôĺ ěéá ęáôÜôěçóç swap"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Äĺí Ý÷ĺôĺ ďńßóĺé ęáôÜôěçóç swap\n"
-"\n"
-"Íá óőíĺ÷ßóů;"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "ĐńÝđĺé íá Ý÷ĺôĺ ěéá ęáôÜôěçóç FAT mounted óôď /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "×ńŢóç ĺëĺýčĺńďő ÷ţńďő"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Äĺí őđÜń÷ĺé áńęĺôüň ĺëĺýčĺńďň ÷ţńďň ăéá äçěéďőńăßá íÝůí ęáôáôěŢóĺůí"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "×ńŢóç őđÜń÷ďíôůí ęáôáôěŢóĺůí"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Äĺí őđÜń÷ďőí ęáôáôěŢóĺéň đńďň ÷ńŢóç"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "×ńŢóç ęáôÜôěçóçň Windows ăéá loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ĐďéÜ ęáôÜôěçóç čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ ăéá ôď Linux4Win;"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "ĹđéëÝîôĺ ôá ěĺăÝčç"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "ĚÝăĺčďň âáóéęŢň ęáôÜôěçóçň óőóôŢěáôďň óĺ MB:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "ĚÝăĺčďň ęáôÜôěçóçň swap óĺ MB"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "×ńŢóç ôďő ĺëĺýčĺńďő ÷ţńďő óôçí ęáôÜôěçóç ôůí Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Óĺ ôé ôýđď ęáôÜôěçóçň čÝëĺôĺ íá áëëÜîĺôĺ ěÝăĺčďň;"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Őđďëďăéóěüň ďńßůí óőóôŢěáôďň áń÷ĺßůí Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Äĺí ěđďńţ íá áëëÜîů ěÝăĺčďň óôçí ęáôÜôěçóç FAT, \n"
-"đńďęëŢčçęĺ ôď đáńáęÜôů ëÜčďň: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Ç ęáôÜôěçóç ôůí Windows ĺßíáé đďëý ęáôáęĺńěáôéóěÝíç, đáńáęáëţ ôńÝîôĺ đńţôá "
-"ôď ``defrag'' "
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ĐŃĎÓĎ×Ç!\n"
-"\n"
-"Ôď DrakX đńÝđĺé ôţńá íá áëëÜîĺé ôď ěÝăĺčďň ôçň ęáôÜôěçóçň ôůí Windows.\n"
-"Ç äéáäéęáóßá áőôŢ ĺěđĺńéÝ÷ĺé ęéíäýíďőň. ĹÜí äĺí ôď Ý÷ĺôĺ ęÜíĺé Ţäç,\n"
-"čá đńÝđĺé íá ĺëÝăîĺôĺ ôçí ęáôÜôěçóç ěĺ ęÜđďéď ó÷ĺôéęü đńüăńáěěá (đ÷\n"
-"scandisk) ęáé ęáôÜ đĺńßđôůóç íá ôçí áđďęáôáęĺńěáôďđďéŢóĺôĺ (defragment).\n"
-"ĚĺôÜ čá đńÝđĺé íá ęńáôŢóĺôĺ áíôßăńáöď áóöáëĺßáň ôůí äĺäďěÝíůí óáň.\n"
-"ĹÜí ĺßóôĺ óßăďőńďé, đáôŢóôĺ Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Ôé ÷ţńď čÝëĺôĺ íá ęńáôŢóĺôĺ ăéá ôá windows óôď"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "ęáôÜôěçóç %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "ÁëëáăŢ ěĺăÝčďőň FAT áđÝôő÷ĺ: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Äĺí őđÜń÷ďőí FAT ęáôáôěŢóĺéň ăéá áëëáăŢ ěĺăÝčďőň Ţ ăéá ÷ńŢóç ůň loopback (Ţ "
-"äĺí őđÜń÷ĺé áńęĺôüň ÷ţńďň)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "ÄéáăńáöŢ ďëüęëçńďő ôďő äßóęďő"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Áöáßńĺóç Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"¸÷ĺôĺ đĺńéóóüôĺńďőň áđü Ýíáí äßóęďőň, óĺ đďéüí čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ ôď "
-"Linux;"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"źëĺň ďé őđÜń÷ďőóĺň ęáôáôěŢóĺéň ęáé ôá äĺäďěÝíá ôďőň óôďí äßóęď %s čá ÷áčďýí"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "ĐńďóáńěďóěÝíĺň ęáôáôěŢóĺéň äßóęďő"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "×ńŢóç fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ěđďńĺßôĺ ôţńá íá ęáôáôěŢóĺôĺ ôďí äßóęď %s\n"
-"źôáí ôĺëĺéţóĺôĺ, ěçí îĺ÷Üóĺôĺ íá áđďčçęĺýóĺôĺ đáôţíôáň `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Äĺí Ý÷ĺôĺ áńęĺôü ĺëĺýčĺńď ÷ţńď óôçí ęáôÜôěçóç ôůí Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Äĺí ěđďńţ íá âńţ áńęĺôü ÷ţńď ăéá ĺăęáôÜóôáóç"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ôď DrakX âńŢęĺ ôéň đáńáęÜôů ëýóĺéň:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ç ęáôÜôěçóç áđÝôő÷ĺ: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Ĺęęßíçóç äéęôýďő"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "ÄéáęďđŢ ëĺéôďőńăßáň äéęôýďő."
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"ĐńďęëŢčçęĺ óöÜëěá đďő äĺí îÝńů đţň íá ôď ÷ĺéńéóôţ.\n"
-"ôďő őëéęďý Ţ áđü ôçí éóôďóĺëßäá ôďő ęáôáóęĺőáóôŢ (áí Ý÷ĺôĺ đńüóâáóç óôď "
-"Internet).Óőíĺ÷ßóôĺ ěĺ äéęéÜ óáň ĺőčýíç."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Äéđëü óçěĺßď óýíäĺóçň %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"ĚĺńéęÜ óçěáíôéęÜ đáęÝôá äĺí ĺăáôáóôÜčçęáí óůóôÜ.\n"
-"Ď ďäçăüň CD-ROM Ţ ôď CD-ROM ĺßíáé ĺëëáôůěáôéęü.\n"
-"ĹëÝăîôĺ ôď CD-ROM óĺ Ýíá Üëëď óýóôçěá ÷ńçóéěďđďéţíôáň ôçí ĺíôďëŢ \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Ęáëţň Ţńčáôĺ óôď %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Äĺí őđÜń÷ĺé äéáčÝóéěďň ďäçăüň äéóęÝôôáň"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "ÂŢěá `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ôď óýóôçěÜ óáň äĺí Ý÷ĺé áńęĺôďýň đüńďőň. Ěđďńĺß íá áíôéěĺôůđßóĺôĺ "
-"đńďâëŢěáôá\n"
-"óôçí ĺăęáôÜóôáóç ôďő Mandrake Linux. ĹÜí óőěâĺß áőôü, ěđďńĺßôĺ íá äďęéěÜóĺôĺ "
-"ĺăęáôÜóôáóç ęĺéěÝíďő.\n"
-"ĐáôŢóôĺ F1 ęáôÜ ôçí ĺęęßíçóç áđü CDROM, ěĺôÜ ăńÜřôĺ `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Ôýđďň ĺăęáôÜóôáóçň"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Đáńáęáëţ ĺéóÜăĺôĺ ôéň đáńáęÜôů đëçńďöďńßĺň"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ôď óőíďëéęü ěÝăĺčďň ôůí ďěÜäůí đďő ĺđéëÝîáôĺ ĺßíáé đĺńßđďő %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"ĹÜí čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ ëéăüôĺńá,\n"
-"ĺđéëÝîôĺ ôď đďóďóôü ôůí đáęÝôůí đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ.\n"
-"\n"
-"¸íá ÷áěçëü đďóďóôü čá ĺăęáôáóôŢóĺé ěüíď ôá đéď óçěáíôéęÜ đáęÝôá.\n"
-"¸íá đďóďóôü 100% čá ĺăęáôáóôŢóĺé üëá ôá ĺđéëĺăěÝíá đáęÝôá."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"¸÷ĺôĺ óôď äßóęď óáň ÷ţńď ěüíď ăéá ôď %d%% áőôţí ôůí đáęÝôůí.\n"
-"\n"
-"ĹÜí čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ ëéăüôĺńá áđü áőôÜ,\n"
-"ĺđéëÝîôĺ ôď đďóďóôü ôůí đáęÝôůí đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ.\n"
-"¸íá ÷áěçëü đďóďóôü čá ĺăęáôáóôŢóĺé ěüíď ôá đéď óçěáíôéęÜ đáęÝôá.\n"
-"¸íá đďóďóôü %d%% čá ĺăęáôáóôŢóĺé üóď đĺńéóóüôĺńá ăßíĺôáé."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Čá ěđďńÝóĺôĺ íá ęÜíĺôĺ ëĺđôďěĺńÝóôĺńç ĺđéëďăŢ óôď ĺđüěĺíď âŢěá."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Đďóďóôü đáęÝôůí đńďň ĺăęáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "ĹđéëďăŢ ďěÜäůí đáęÝôůí"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "ĹđéëďăŢ îĺ÷ůńéóôţí đáęÝôůí"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Óőíďëéęü ěÝăĺčďň: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "ËÜčďň đáęÝôď"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "źíďěá: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "¸ęäďóç: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "ĚÝăĺčďň: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Óçěáóßá: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Äĺí ěđďńĺßôĺ íá ĺđéëÝîĺôĺ áőôü ôď đáęÝôď äéüôé äĺí őđÜń÷ĺé áńęĺôüň ÷ţńďň"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Čá ĺăęáôáóôáčďýí ôá đáńáęÜôů đáęÝôá"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Čá áöáéńĺčďýí ôá đáńáęÜôů đáęÝôá "
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Äĺí ěđďńĺßôĺ íá ĺđéëÝîĺôĺ/áđďĺđéëÝîĺôĺ áőôü ôď đáęÝôď"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Áőôü ĺßíáé áđáéôďýěĺíď đáęÝôď, äĺí ěđďńĺß íá áđďĺđéëĺăĺß"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Äĺí ěđďńĺßôĺ íá áđďĺđéëÝîĺôĺ áőôü ôď đáęÝôď. Ĺßíáé Ţäç ĺăęáôĺóôçěÝíď"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Áőôü ôď đáęÝôď đńÝđĺé íá áíáâáčěéóôĺß\n"
-"Ĺßóôĺ óßăďőńďň üôé čÝëĺôĺ íá ôď áđďĺđéëÝîĺôĺ;"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Äĺí ěđďńĺßôĺ íá áđďĺđéëÝîĺôĺ áőôü ôď đáęÝôď. ĐńÝđĺé íá áíáâáčěéóôĺß"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Áőôüěáôç đńďâďëŢ ĺđéëĺăěÝíůí đáęÝôůí"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "ĹăęáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Öüńôůóç/ÁđďčŢęĺőóç óĺ äéóęÝôôá"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "ÁíáíÝůóç ĺđéëĺăěÝíůí đáęÝôůí"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "ĹëÜ÷éóôç ĹăęáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "ĹđéëÝîôĺ ôá đáęÝôá đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "ĹăęáôÜóôáóç"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Ĺęôßěçóç"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "ĹíáđďěÝíůí ÷ńüíďň "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Đáńáęáëţ đĺńéěÝíĺôĺ, đńďĺôďéěáóßá ĺăęáôÜóôáóçň"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d đáęÝôá"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "ĹăęáôÜóôáóç đáęÝôďő %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Áđďäď÷Ţ"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "śńíçóç"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"ÁëëáăŢ Cd-Rom!\n"
-"\n"
-"Đáńáęáëţ ĺéóÜăĺôĺ ôď Cd-Rom ěĺ üíďěá \"%s\" óôďí ďäçăü óáň ęáé đáôŢóôĺ Ďę.\n"
-"ĹÜí äĺí ôď Ý÷ĺôĺ, đáôŢóôĺ Áęýńůóç ăéá áđďöőăŢ ĺăęáôÜóôáóçň áđü áőôü ôď CdRom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Íá óőíĺ÷ßóů;"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "ĐńďęëŢčçęĺ óöÜëěá ęáôÜ ôçí ôáîéíüěçóç ôůí đáęÝôůí:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "ĐńďęëŢčçęĺ óöÜëěá ęáôÜ ôçí ĺăęáôÜóôáóç ôůí đáęÝôůí:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Đńďĺéäďđďßçóç\n"
-"\n"
-"Đáńáęáëţ äéáâÜóôĺ đńďóĺ÷ôéęÜ ôďőň üńďőň đáńáęÜôů. Ĺáí äéáöůíĺßôĺ ěĺ \n"
-"ďđďéďäŢđďôĺ ęďěěÜôé, äĺí óáň ĺđéôńÝđĺôáé íá ĺăęáôáóôŢóĺôĺ ôď ĺđüěĺíď ěÝóď "
-"CD. ĐáôŢóôĺ \n"
-"'Äéáöůíţ' ăéá íá óőíĺ÷ßóĺôĺ ôçí ĺăęáôÜóôáóç ÷ůńßň áőôÜ ôá ěÝóá.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "ĐńďęëŢčçęĺ óöÜëěá"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "ČÝëĺôĺ íá ĺđáíĺęęéíŢóĺôĺ ôď äßęôőď;"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "śäĺéá ÷ńŢóçň"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"ĹéóáăůăŢ\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Đëçęôńďëüăéď"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ äéáńýčěéóç đëçęôńďëďăßďő."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "ÁőôŢ ĺßíáé ç đëŢńçň ëßóôá ôůí äéáčÝóéěůí đëçęôńďëďăßůí"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Ôé ôýđď ĺăęáôÜóôáóçň đńďôéěÜôĺ;"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "ĹăęáôÜóôáóç/ÁíáâÜčěéóç"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Đńüęĺéôáé ăéá ĺăęáôÜóôáóç Ţ ăéá áíáâÜčěéóç;"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Óőíéóôţěĺíď"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ăéá ĺéäéęďýň"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "ÁíáâÜčěéóç"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "ÁíáíÝůóç ĺđéëĺăěÝíůí đáęÝôůí"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôýđď đďíôéęéďý."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Čýńá đďíôéęéďý"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-"Đáńáęáëţ ĺđéëÝîôĺ óĺéńéáęŢ čýńá óôçí ďđďßá ĺßíáé óőíäĺäĺěÝíď ôď đďíôßęé óáň."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Đńďóďěďßůóç Ęďőěđéţí"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Đńďóďěďßůóç 2 Ęďőěđéţí"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Đńďóďěďßůóç 3 Ęďőěđéţí"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Ńýčěéóç ęáńôţí PCMCIA "
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Ńýčěéóç IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "äĺí őđÜń÷ďőí äéáčÝóéěĺň ęáôáôěŢóĺéň"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "ÁíÜëőóç ęáôáôěŢóĺůí ăéá đńďóäéďńéóěü óçěĺßůí óýíäĺóçň."
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "ĹđéëÝîôĺ óçěĺßá óýíäĺóçň"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Äĺí ěđďńţ íá äéáâÜóů ôďí đßíáęá ęáôáôěŢóĺůí, ĺßíáé đďëý ęáôĺóôńáěÝíďň :(\n"
-"Čá đńďóđáčŢóů íá óőíĺ÷ßóů áöáéńţíôáň ôéň ëáíčáóěÝíĺň ęáôáôěŢóĺéň ęáé ĎËÁ\n"
-"ôá äĺäďěÝíá čá ÷áčďýí. Ç Üëëç ĺđéëďăŢ óáň ĺßíáé íá ěçí ĺđéôńÝřĺôĺ óôď \n"
-"DrakX íá áăăßîĺé ôďí đßíáęá ęáôáôěŢóĺůí. Ôď óöÜëěá ĺßíáé: %s\n"
-"\n"
-"Óőěöůíĺßôĺ íá äéáăńáöďýí üëĺň ďé ęáôáôěŢóĺéň;\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Ôď DiskDrake áđÝôő÷ĺ íá äéáâÜóĺé óůóôÜ ôďí đßíáęá ęáôáôěŢóĺůí.\n"
-"Óőíĺ÷ßóôĺ ěĺ äéęŢ óáň ĺőčýíç!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Äĺí őđÜń÷ĺé ĺëĺýčĺńďň ÷ţńďň ăéá 1MB bootstrap! Ç ĺăęáôÜóôáóç čá óőíĺ÷éóôĺß, "
-"áëëÜ ăéá íá îĺęéíŢóĺôĺ ôď óýóôçěÜ óáň, čá ÷ńĺéáóôĺß íá äçěéďőńăŢóĺôĺ ěéá "
-"ęáôÜôěçóç bootstrap ěĺ ôď DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Äĺí âńÝčçęĺ ęáôÜôěçóç root ăéá ôçí đńáăěáôďđďßçóç ôçň áíáâÜčěéóçň"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Root Partition (âáóéęŢ ęáôÜôěçóç óőóôŢěáôďň)"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "ĐďéÜ ĺßíáé ç âáóéęŢ ęáôÜôěçóç (/) ôďő óőóôŢěáôüň óáň;"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Áđáéôĺßôáé ĺđáíĺęęßíçóç ăéá íá ĺíĺńăďđďéçčďýí ďé áëëáăÝň óôďí đßíáęá "
-"ęáôáôěŢóĺůí"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "ĹđéëÝîôĺ ęáôáôěŢóĺéň đńďň ěďńöďđďßçóç"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "¸ëĺă÷ďň ăéá ÷áëáóěÝíá blocks;"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Ěďńöďđďßçóç ęáôáôěŢóĺůí"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Äçěéďőńăßá ęáé ěďńöďđďßçóç áń÷ĺßďő %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Äĺí őđÜń÷ĺé áńęĺôü swap ăéá ôçí ďëďęëŢńůóç ôçň ĺăęáôÜóôáóçň, đáńáęáëţ "
-"đńďóčÝóôĺ"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "ŘÜ÷íů ăéá äéáčÝóéěá đáęÝôá"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Đńďóäéďńéóěüň đáęÝôůí đńďň áíáâÜčěéóç"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Ôď óýóôçěÜ óáň äĺí Ý÷ĺé áńęĺôü äéáčÝóéěď ÷ţńď ăéá ĺăęáôÜóôáóç Ţ áíáâÜčěéóç (%"
-"d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "ĐëŢńçň (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "ĹëÜ÷éóôç (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Óőíéóôţěĺíç (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Đáńáęáëţ ĺđéëÝîôĺ ôç öüńôůóç Ţ áđďčŢęĺőóç ôůí ĺđéëďăŢň đáęÝôůí óôç "
-"äéóęÝôôá.\n"
-"Ç ěďńöďđďßçóç ĺßíáé ç ßäéá ěĺ ôéň äéóęÝôôĺň áőôüěáôçň ĺăęáôÜóôáóçň."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Öüńôůóç áđü äéóęÝôôá"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Öüńôůóç áđü äéóęÝôôá"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "ĹđéëďăŢ đáęÝôůí"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "ĹéóÜăĺôĺ äéóęÝôôá đďő đĺńéÝ÷ĺé ôçí ĺđéëďăŢ đáęÝôůí"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "ÁđďčŢęĺőóç óĺ äéóęÝôôá"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Ôď ĺđéëĺăěÝíď ěÝăĺčďň ĺßíáé ěĺăáëýôĺńď áđü ôď äéáčÝóéěď ÷ţńď"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"ĹÜí Ý÷ĺôĺ üëá ôá đáńáęÜôů CDs, đáôŢóôĺ Ok.\n"
-"ĹÜí äĺí Ý÷ĺôĺ ęáíÝíá áđü ôá đáńáęÜôů CDs, đáôŢóôĺ Áęýńůóç.\n"
-"ĹÜí äĺí Ý÷ĺôĺ ęÜđďéá áđü áőôÜ, áđďĺđéëÝîôĺ ôá ęáé đáôŢóôĺ Ok."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ďíüěáôé \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Đńďĺôďéěáóßá ĺăęáôÜóôáóçň"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"ĹăęáôÜóôáóç đáęÝôďő %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Ńőčěßóĺéň ěĺôÜ ôçí ĺăęáôÜóôáóç"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Đáńáęáëţ ĺéóÜăĺôĺ ôç äéóęÝôôá Ĺęęßíçóçň óôďí ďäçăü %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Đáńáęáëţ ĺéóÜăĺôĺ ôç äéóęÝôôá ÁíáíÝůóçň ÁńčńůěÜôůí óôďí ďäçăü %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ěđďńĺßôĺ ôţńá íá ęáôĺâÜóĺôĺ ęńőđôďăńáöéęü ëďăéóěéęü.\n"
-"\n"
-"ĐŃĎÓĎ×Ç:\n"
-"\n"
-"Ëüăů ôůí äéáöďńĺôéęţí íüěůí đďő éó÷ýďőí óĺ äéÜöďńá ěÝńç ó÷ĺôéęÜ ěĺ ôçí "
-"ęńőđôďăńáößá,\n"
-"ď ÷ńŢóôçň đńÝđĺé íá âĺâáéůčĺß üôé ďé íüěďé đďő ôďí áöďńďýí ôďő ĺđéôńÝđďőí íá "
-"ęáôĺâÜóĺé,\n"
-"áđďčçęĺýóĺé ęáé/ç ÷ńçóéěďđďéŢóĺé áőôü ôď ëďăéóěéęü.\n"
-"\n"
-"Ď ÷ńŢóôçň đńÝđĺé íá đńďóÝîĺé íá ěçí đáńáâĺß ôďőň ó÷ĺôéęďýň íüěďőň. Ôő÷üí "
-"đáńáâßáóç áőôţí\n"
-"ôůí íüěůí, ěđďńĺß íá ĺđéöÝńĺé ęőńţóĺéň.\n"
-"\n"
-"Óĺ ęáěßá đĺńßđôůóç ç Mandrakesoft, ďé ęáôáóęĺőáóôÝň ęáé ďé đńďěçčĺőôÝň ôçň "
-"äĺí öÝńďőí ĺőčýíç\n"
-"ăéá ďđďéĺóäŢđďôĺ ćçěéÝň (đďő đĺńéëáěâÜíďőí ěĺôáîý Üëëůí áđţëĺéá ęĺńäţí, "
-"äéáôÜńáîç ëĺéôďőńăßáň\n"
-"ĺđé÷ĺßńçóçň, áđţëĺéá đëçńďöďńéţí ęáé ôő÷üí ęüóôç đďő čá đńďęýřďőí áđü "
-"íďěéęÝň ĺőčýíĺň.\n"
-"\n"
-"Ăéá đĺńéóóüôĺńĺň đëçńďöďńßĺň ĺđéęďéíůíŢóôĺ \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Óýíäĺóç ăéá ëŢřç đáęÝôůí"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "ĹđéëÝîôĺ ôüđď áđü ôďí ďđďßď čá ăßíĺé ç ëŢřç đáęÝôůí"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Óýíäĺóç ăéá ëŢřç đáęÝôůí"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "ĐďéÜ ĺßíáé ç ćţíç ţńáň;"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Ôď ńďëüé ôďő őđďëďăéóôŢ óáň ĺßíáé ńőčěéóěÝíď óĺ GMT (ţńá ĂęńŢíďőúôň)"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Áőôüěáôďň óőă÷ńďíéóěüň ţńáň (÷ńŢóç NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "ĹîőđçńĺôçôŢň NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺîőđçńĺôçôŢň CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "ĘáíÝíáň ĺęôőđůôŢň"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "¸÷ĺôĺ áëëďí;"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Đĺńßëçřç"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Đďíôßęé"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "ŮńďëďăéáęŢ Ćţíç"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "ĹęôőđůôŢň"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "KÜńôá ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "ĘÜńôá Ţ÷ďő"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "ĘÜńôá TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "ÔďđéęÜ áń÷ĺßá"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Óőíčçěáôéęü root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "×ůńßň óőíčçěáôéęü"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Áőôü ôď óőíčçěáôéęü ĺßíáé đďëý áđëü (đńÝđĺé íá ĺßíáé ôďőëÜ÷éóôďí %d "
-"÷áńáęôŢńĺň ěáęńý)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Đéóôďđďßçóç ôáőôüôçôáň"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Đéóôďđďßçóç LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "ĹîőđçńĺôçôŢň LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Ĺîáęńßâůóç NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Đĺńéď÷Ţ (domain) NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "ĹîőđçńĺôçôŢň NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Ěéá đńďóáńěďóěÝíç äéóęÝôôá ĺęęßíçóçň óáň äßíĺé ôçí äőíáôüôçôá íá ĺęęéíŢóĺôĺ\n"
-"ôď óýóôçěÜ óáň ÷ůńßň ôçí ÷ńŢóç ôďő đńďăńÜěěáôďň ĺęęßíçóçň. Áőôü ĺßíáé "
-"÷ńŢóéěď ĺÜí äĺí čÝëĺôĺ\n"
-"íá ĺăęáôáóôŢóĺôĺ ôď SILO , ĺÜí ęÜđďéď Üëëď ëĺéôďőńăéęü ęáôáóôńÝřĺé ôď SILO\n"
-"Ţ ĺÜí ďé ńőčěßóĺéň óáň äĺí ĺđéôńÝđďőí ôç ÷ńŢóç SILO. ÁőôŢ ç äéóęÝôôá ěđďńĺß\n"
-"ĺđßóçň íá ÷ńçóéěďđďéçčĺß óĺ óőíäőáóěü ěĺ ôçí äéóęÝôôá äéÜóůóçň ôďő "
-"Mandrake,\n"
-"ęÜíďíôáň ĺőęďëüôĺńç ôçí ĺđáíáöďńÜ ôďő óőóôŢěáôďň ěĺôÜ áđü óďâáńŢ âëÜâç.\n"
-"ČÝëĺôĺ íá äçěéďőńăŢóĺôĺ äéóęÝôôá ĺęęßíçóçň;"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Đńţôďň ďäçăüň äéóęÝôáň"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Äĺýôĺńďň ďäçăüň äéóęÝôáň"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "ĐáńÜëĺéřç"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Ěéá đńďóáńěďóěÝíç äéóęÝôôá ĺęęßíçóçň óáň äßíĺé ôçí äőíáôüôçôá íá ĺęęéíŢóĺôĺ\n"
-"ôď óýóôçěÜ óáň ÷ůńßň ôçí ÷ńŢóç ôďő đńďăńÜěěáôďň ĺęęßíçóçň. Áőôü ĺßíáé "
-"÷ńŢóéěď ĺÜí äĺí čÝëĺôĺ\n"
-"íá ĺăęáôáóôŢóĺôĺ ôď LILO (Ţ ôď grub), ĺÜí ęÜđďéď Üëëď ëĺéôďőńăéęü "
-"ęáôáóôńÝřĺé ôď LILO\n"
-"Ţ ĺÜí ďé ńőčěßóĺéň óáň äĺí ĺđéôńÝđďőí ôç ÷ńŢóç LILO. ÁőôŢ ç äéóęÝôôá ěđďńĺß\n"
-"ĺđßóçň íá ÷ńçóéěďđďéçčĺß óĺ óőíäőáóěü ěĺ ôçí äéóęÝôôá äéÜóůóçň ôďő "
-"Mandrake,\n"
-"ęÜíďíôáň ĺőęďëüôĺńç ôçí ĺđáíáöďńÜ ôďő óőóôŢěáôďň ěĺôÜ áđü óďâáńŢ âëÜâç.\n"
-"ČÝëĺôĺ íá äçěéďőńăŢóĺôĺ äéóęÝôôá ĺęęßíçóçň;\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "ËőđÜěáé, äĺí őđÜń÷ĺé äéáčÝóéěďň ďäçăüň äéóęÝôôáň"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ĹđéëÝîôĺ ďäçăü äéóęÝôôáň ăéá äçěéďőńăßá äéóęÝôôáň ĺęęßíçóçň"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "ĹéóÜăĺôĺ äéóęÝôôá óôďí ďäçăü %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Äçěéďőńăßá äßóęďő ĺęęßíçóçň"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Đńďĺôďéěáóßá đńďăńÜěěáôďň ĺęęßíçóçň"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Öáßíĺôáé đůň Ý÷ĺôĺ Ýíá Áń÷áßď Ţ śăíůóôď\n"
-" ěç÷Üíçěá, ď yaboot bootloader äĺí čá äďőëÝřĺé ăéá óáň.\n"
-"Ç ĺăęáôÜóôáóç čá óőíĺ÷éóôĺß, áëëÜ\n"
-"čá ÷ńĺéáóôĺß íá ÷ńçóéěďđďéŢóĺôĺ ôď BootX ăéá íá îĺęéíŢóĺôĺ ôď ěç÷ÜíçěÜ óáň"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "ČÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ ôď aboot;"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"ÓöÜëěá ęáôÜ ôçí ĺăęáôÜóôáóç ôďő aboot, \n"
-"đńďóđÜčĺéá âĺâéáóěÝíçň ĺăęáôÜóôáóçň, áęüěá ęáé áí áőôü Ý÷ĺé óáí áđďôÝëĺóěá "
-"ôçí ęáôáóôńďöŢ ôçň đńţôçň ęáôÜôěçóçň;"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Ĺăę. đń. ĺęęßíçóçň"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Ç ĺăęáôÜóôáóç ôďő đńďăńÜěěáôďň ĺęęßíçóçň áđÝôő÷ĺ. ĐńďęëŢčçęĺ ôď áęüëďőčď "
-"óöÜëěá:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Ěđďńĺß íá ÷ńĺéáóôĺß íá áëëÜîĺôĺ ôçí Open Firmware boot-óőóęĺőŢ ţóôĺ íá\n"
-" ĺíĺńăďđďéŢóĺôĺ ôďí bootloader. Áí óôď reboot äĺí äĺßôĺ ôçí đńďôńďđŢ ôďő\n"
-" bootloader, đáôŢóôĺ ôď Command-Option-O-F ęáôÜ ôď reboot ęáé ĺéóÜăĺôĺ:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Ôüôĺ ôőđţóôĺ: shut-down\n"
-"Óôçí ĺđüěĺíç ĺęęßíçóç čá đńÝđĺé íá äĺßôĺ ôçí đńďôńďđŢ ôďő bootloader."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ĹéóÜăĺôĺ Üäĺéá äéóęÝôôá óôďí ďäçăü %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Đńďĺôďéěáóßá äéóęÝôáň áőôüěáôçň ĺăęáôÜóôáóçň"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"ĚĺńéęÜ âŢěáôá äĺí ďëďęëçńţčçęáí.\n"
-"\n"
-"ČÝëĺôĺ óßăďőńá íá ĺăęáôáëĺßřĺôĺ ôţńá;"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Óőă÷áńçôŢńéá, ç ĺăęáôÜóôáóç ďëďęëçńţčçęĺ.\n"
-"ÁöáéńÝóôĺ ôçí äéóęÝôôá Ţ ôď CD ĺęęßíçóçň ęáé đáôŢóôĺ return ăéá "
-"ĺđáíĺęęßíçóç.\n"
-"\n"
-"\n"
-"Ăéá đëçńďöďńßĺň ó÷ĺôéęÜ ěĺ äéďńčţóĺéň áőôŢň ôçň Ýęäďóçň ôďő Mandrake Linux,\n"
-"óőěâďőëĺőôĺßôĺ ôçí óĺëßäá \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Đëçńďöďńßĺň ó÷ĺôéęÜ ěĺ ôéň ńőčěßóĺéň ôďő óőóôŢěáôüň óáň őđÜń÷ďőí óôď "
-"ó÷ĺôéęü\n"
-"ęĺöÜëáéď ôďő ĺđßóçěďő ďäçăďý ÷ńŢóçň ôďő Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Đńďĺôďéěáóßá äéóęÝôôáň áőôüěáôçň ĺăęáôÜóôáóçň"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Ç áőôüěáôç ĺăęáôÜóôáóç ěđďńĺß íá ĺßíáé đëŢńůň áőôüěáôç,\n"
-"óĺ áőôŢí ôçí đĺńßđôůóç čá áíáëÜâĺé ôď óęëçńü äßóęď!!\n"
-"(áőôü áíáöÝńĺôáé ăéá đĺńéđôţóĺéň ĺăęáôÜóôáóçň óĺ Üëëď őđďëďăéóôŢ).\n"
-"\n"
-"Ěđďńĺß íá đńďôéěÜôĺ íá ĺđáíáëÜâĺôĺ ôçí ĺăęáôÜóôáóç.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Áőôüěáôď"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ĺđáíáöüńôůóç"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "ÁđďčŢęĺőóç ĺđéëďăŢň đáęÝôůí"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "ĹăęáôÜóôáóç Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> ÁëëáăŢ đĺäßďő | <Space> ĺđéëďăŢ | <F12> ĺđüěĺíç ďč. "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "ôď kdesu ëĺßđĺé"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "ĹđéëÝîôĺ đńÜîç"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr " Ăéá Đńď÷ůńçěÝíďőň"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Đáńáęáëţ đĺńéěÝíĺôĺ"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Đëçńďöďńßĺň"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "ÁíÜđôőîç äÝíôńďő"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Óýěđôőîç äÝíôńďő"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "ĹíáëëáăŢ ěĺôáîý ĺđßđĺäçň ęáé ďěáäéęŢň ôáîéíüěçóçň"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "ĘáęŢ ĺđéëďăŢ, îáíáäďęéěÜóôĺ\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ç ĺđéëďăŢ óáň; (ĺî' ďńéóěďý %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ç ĺđéëďăŢ óáň; (ĺî' ďńéóěďý %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "ĹđéëďăÝň: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "ČÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ ôď aboot;"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ç ĺđéëďăŢ óáň; (ĺî' ďńéóěďý %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "ÔóÝ÷éęď (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Ăĺńěáíéęü"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Éóđáíéęü"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Öéíëáíäéęü"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ăáëëéęü"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Íďńâçăéęü"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Đďëůíéęü"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ńůóéęü"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Óďőçäéęü"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "ĚĺăÜëç Âńĺôáííßá (UK)"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Ç.Đ.Á. (US)"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Áëâáíéęü"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Áńěĺíéęü (đáëéü)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Áńěĺíéęü (ăńáöďěç÷áíŢ)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Áńěĺíéęü (öůíçôéęü)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "ÁćĺńěđáúôćÜí (Ëáôéíéęü)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Âĺëăéęü"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Áńěĺíéęü (öůíçôéęü)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Âďőëăáńéęü"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "ÂńáćéëéÜíéęď"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Ëĺőęďńůóßáň"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Ĺëâĺôéęü (ĂĺńěáíéęŢ äéáńýčěéóç)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Ĺëâĺôéęü (ĂáëëéęŢ äéáńýčěéóç)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "ÔóÝ÷éęď (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Ăĺńěáíéęü (÷ůńßň íĺęńÜ đëŢęôńá)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Äáíéęü"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (ÇĐÁ)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Íďńâçăéęü)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (ÇĐÁ)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Ĺóčďíéęü"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ăĺůńăßá (\"Ńůóéęç\" äéáńýčěéóç)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ăĺůńăßá (\"ËáôéíéęŢ\" äéáńýčěéóç)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Ĺëëçíéęü"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ďőăăńéęü"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Ęńďáôéęü"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "ÉóńáŢë"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "ÉóńáŢë (öůíçôéęü)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Éńáíéęü"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Éóëáíäéęü"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Éôáëéęü"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Éáđůíéęü 106 đëŢęôńůí"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "ĘďńĺÜôéęď Đëçęôńďëüăéď"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "ËáôéíéęŢň ÁěĺńéęŢň"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ëéčďőáíéęü AZERTY (đáëéü)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ëéčďőáíéęü AZERTY (íÝď)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ëéčďőáíéęü \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ëéčďőáíéęü \"öůíçôéęü\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Ôďđďčĺóßá"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "ĚáęĺäďíéęŢ"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Ďëëáíäéęü"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Đďëůíéęü (äéáńýčěéóç qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Đďëůíéęü (äéáńýčěéóç qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Đďńôďăáëëéęü"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Ęáíáäéęü (ĘĺěđÝę)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Ńďőěáíéęü (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Ńďőěáíéęü (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ńůóéęü (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Óëďâĺíßáň"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Óëďâáęßáň (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Óëďâáęßáň (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "ÁćĺńěđáúôćÜí (ęőńéëëéęü)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Đßíáęáň"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Thai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Ôďőńęéęü (đáńáäďóéáęü \"F\" ěďíôÝëď)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Ôďőńęéęü (ěďíôÝńíď \"Q\" ěďíôÝëď)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ďőęńáíéęü"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US äéĺčíÝň"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "ÂéĺôíÜě \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Ăéďőăęďóëáâéęü (ëáôéíéęü/ęőńéëëéęü)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "ĘőęëéęÝň óőíäÝóĺéň %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "ÁöáéńÝóôĺ ôá logical volumes đńţôá\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ăĺíéęďý ôýđďő đďíôßęé PS2 ěĺ ńďäÜęé"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 đëŢęôńďő"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Ăĺíéęďý ôýđďő ěĺ 2 đëŢęôńá"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Ăĺíéęü"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ěĺ ńďäÜęé"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "óĺéńéáęü"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Ăĺíéęďý ôýđďő ěĺ 3 đëŢęôńá"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (óĺéńéáęü, đáëéüň C7 ôýđďň)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "Äýď đëŢęôńůí"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "Ôńéţí đëŢęôńůí"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ęáíÝíá"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "×ůńßň đďíôßęé"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Đáńáęáëţ äďęéěÜóôĺ ôď đďíôßęé"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Ăéá ĺíĺńăďđďßçóç đďíôéęéďý"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ĘÉÍÇÓÔĹ ÔĎ ŃĎÄÁĘÉ!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "ÔÝëďň"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Ĺđüěĺíď -ť"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Đńďçăďýěĺíď"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Óůóôü;"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Óýíäĺóç óôď Äéáäßęôőď"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Ď đéď ęďéíüň ôńüđďň óýíäĺóçň adsl ĺßíáé pppoe.\n"
-"ĎńéóěÝíĺň óőíäÝóĺéň ÷ńçóéěďđďéďýí pptp, ęÜđďéĺň ëßăĺň dhcp.\n"
-"ĹÜí äĺí îÝńĺôĺ, ĺđéëÝîôĺ '÷ńŢóç pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "÷ńŢóç dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "÷ńŢóç pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "÷ńŢóç pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Đďéüí đĺëÜôç dhcp čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ;\n"
-"Ç đńďĺđéëďăŢ ĺßíáé dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Äĺí âńÝčçęĺ đńďóáńěďăÝáň äéęôýďő Ethernet óôď óýóôçěÜ óáň.\n"
-"Äĺí ěđďńţ íá ńőčěßóů áőôďý ôďő ôýđďő ôçí óýíäĺóç."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "ĹđéëÝîôĺ óőóęĺőŢ äéęôýďő"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Đáńáęáëţ ĺđéëÝîôĺ đďéÜ óőóęĺőŢ äéęôýďő čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ ăéá ôçí "
-"óýíäĺóç óôď Äéáäßęôőď"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "äĺí âńÝčçęĺ đńďóáńěďăÝáň äéęôýďő"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Ńýčěéóç äéęôýďő"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Đáńáęáëţ ĺéóÜăĺôĺ ôď üíďěá ôďő óőóôŢěáôďň Ýáí ôď îÝńĺôĺ.\n"
-"ĎńéóěÝíďé ĺîőđçńĺôçôÝň DHCP äĺí ëĺéôďőńăďýí ÷ůńßň áőôü.\n"
-"Ôď üíďěá áőôü đńÝđĺé íá ĺßíáé Ýíá đëŢńĺň üíďěá óőóôŢěáôďň,\n"
-"üđůň đ.÷. ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "źíďěá óőóôŢěáôďň"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Ďäçăüň Ńýčěéóçň Äéęôýďő"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Ĺîůôĺńéęü ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "ĹóůôĺńéęŢ ęÜńôá ISDN"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Ôß ĺßäďőň ĺßíáé ç ISDN óýíäĺóŢ óáň;"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"ĐďéÜ ISDN ńýčěéóç đńďôéěÜôĺ;\n"
-"\n"
-"* Ç đáëéÜ ńýčěéóç ÷ńçóéěďđďéĺß ôď isdn4net. ĐĺńéÝ÷ĺé ÷ńŢóéěá ĺńăáëĺßá,\n"
-" áëëÜ ĺßíáé ëßăď äýóęďëď ăéá Ýíáí áń÷Üńéď íá ńőčěéóôĺß ęáé ü÷é óôĺńĺüôőđď.\n"
-"\n"
-"* Ç ÍÝá ńýčěéóç ĺßíáé ĺőęďëüôĺńç óôçí ęáôáíüçóç, đĺńéóóüôĺńď óôĺńĺüôőđç,\n"
-" áëëÜ ěĺ ëéăüôĺńá ĺńăáëĺßá.\n"
-"\n"
-"Đńďôĺßíďőěĺ ôçí ĺëáöńéÜ ńýčěéóç.\n"
-"\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "ÍÝá ńýěčéóç (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ĐáëéÜ ńýěčéóç (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Ńőčěßóĺéň ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"ĹđéëÝîôĺ ôďí đáńď÷Ýá óáň\n"
-" ĹÜí äĺí ĺßíáé óôďí ęáôÜëďăď, ĺđéëÝîôĺ Unlisted"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Đńůôüęďëëď Ĺęęßíçóçň"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Ĺőńţđç (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Őđüëďéđďň ęüóěďň"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Őđüëďéđďň ęüóěďň \n"
-" ÷ůńßň D-Channel (ěéóčůěÝíĺň ăńáěěÝň)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Đďéü đńůôüęďëëď čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ;"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Ôß ęÜńôá Ý÷ĺôĺ;"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Äĺí îÝńů"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ĹÜí Ý÷ĺôĺ ISA ęÜńôá, ďé ôéěÝň óôçí ĺđüěĺíç ďčüíç čá đńÝđĺé íá ĺßíáé óůóôÝň.\n"
-"\n"
-"ĹÜí Ý÷ĺôĺ PCMCIA ęÜńôá, đńÝđĺé íá îÝńĺôĺ ôď irq ęáé ôď io ôçň ęÜńôáň óáň.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Áęýńůóç"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "ÓőíÝ÷ĺéá"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "ĐďéÜ ĺßíáé ç ISDN ęÜńôá óáň;"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Ĺíôüđéóá ěéá ISDN ęÜńôá, áëëÜ äĺí îÝńů ôďí ôýđď ôçň. Đáńáęáëţ ĺđéëÝîôĺ ěéá "
-"ęÜńôá PCI áđü ôçí đáńáęÜôů ďčüíç."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Äĺí âńÝčçęĺ ęÜńôá ISDN. Đáńáęáëţ ĺđéëÝîôĺ ěéá áđü ôçí đáńáęÜôů ďčüíç."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Óĺ đďéÜ óĺéńéáęŢ đüńôá ĺßíáé óőíäĺäĺěÝíď ôď modem óáň;"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "ĹđéëďăÝň dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "źíďěá óýíäĺóçň"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Áńéčěüň ôçëĺöţíďő"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Login ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "×ńŢóç script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "×ńŢóç ôĺńěáôéęďý"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "źíďěá äéęôýďő"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Đńţôďň ĺîőđçńĺôçôŢň DNS (đńďáéńĺôéęü)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Äĺýôĺńďň ĺîőđçńĺôçôŢň DNS (đńďáéńĺôéęü)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Ěđďńĺßôĺ íá áđďóőíäĺčĺßôĺ Ţ íá ĺđáíáńőčěßóĺôĺ ôçí óýíäĺóŢ óáň."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Ěđďńĺßôĺ íá ĺđáíáńőčěßóĺôĺ ôçí óýíäĺóŢ óáň."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "ÁőôŢ ôç óôéăěŢ ĺßóôĺ óőíäĺäĺěÝíďé óôď Äéáäßęôőď."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Ěđďńĺßôĺ íá óőíäĺčĺßôĺ óôď Äéáäßęôőď Ţ íá ĺđáíáńőčěßóĺôĺ ôçí óýíäĺóŢ óáň."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "ÁőôŢ ôç óôéăěŢ äĺí ĺßóôĺ óőíäĺäĺěÝíďé óôď Äéáäßęôőď."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Óýíäĺóç"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Áđďóýíäĺóç"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Ńýčěéóç äéęôýďő"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Óýíäĺóç ęáé ńýčěéóç Äéáäéęôýďő (internet)"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ôţńá čá ńőčěßóďőěĺ ôçí %s óýíäĺóç."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ôţńá čá ńőčěßóďőěĺ ôçí %s óýíäĺóç.\n"
-"\n"
-"\n"
-"ĐáôŢóôĺ ôď OK ăéá íá îĺęéíŢóĺôĺ"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Ńőčěßóĺéň äéęôýďő"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"ĹđĺéäŢ ęÜíĺôĺ ěéá äéęôőáęŢ ĺăęáôÜóôáóç, ôď äßęôőď ĺßíáé Ţäç ńőčěéóěÝíď.\n"
-"ĘÜíôĺ ęëßę óôď Ďę ăéá íá äéáôçńŢóĺôĺ ôéň ńőčěßóĺéň óáň, Ţ Üęőńď ăéá íá "
-"îáíáńőčěßóĺôĺ ôç óýíäĺóç óôď Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Ęáëţň Ţëčáôĺ óôďí Ďäçăü Ńýčěéóçň ôďő Äéęôýďő\n"
-"\n"
-"Ĺßěáóôĺ Ýôďéěďé íá ńőčěßóďőěĺ ôç óýíäĺóŢ óáň óôď internet/äßęôőď.\n"
-"Áí äĺí čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ ôçí áőôüěáôç áíß÷íĺőóç, îĺôóĺęÜńĺôĺ ôď "
-"checkbox.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "ĹđéëÝîôĺ ôď đńďößë ăéá ńýčěéóç"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "×ńŢóç áőôüěáôçň áíß÷íĺőóçň"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Ĺíôďđéóěüň óőóęĺőţí..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "ÁđëŢ óýíäĺóç ěĺ modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "áíé÷íĺýčçęĺ óôçí đüńôá %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Óýíäĺóç ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "áíé÷íĺýčçęĺ ôď %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Óýíäĺóç ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "áíé÷íĺýôçęĺ óôçí äéĺđéöÜíĺéá %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "ĘáëůäéáęŢ óýíäĺóç"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "áíé÷íĺýčçęĺ ęáëůäéáęŢ óýíäĺóç"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Óýíäĺóç LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ęÜńôá(ĺň) ethernet áíé÷íĺýčçęáí"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "ĹđéëÝîôĺ ôç óýíäĺóç đďő čÝëĺôĺ íá ńőčěßóĺôĺ"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"¸÷ĺôĺ ńőčěßóĺé đďëëďýň ôńüđďőň ăéá íá óőíäÝĺóôĺ óôď Internet.\n"
-"ĹđéëÝîôĺ áőôüí đďő čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Óýíäĺóç Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "ČÝëĺôĺ íá óőíäÝĺóôĺ ęáôÜ ôçí ĺęęßíçóç;"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Ńőčěßóĺéň äéęôýďő"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"¸íá đńüâëçěá ĺěöáíßóôçęĺ ęáôÜ ôçí ĺđáíĺęęßíçóç ôďő äéęôýďő: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Óőă÷áńçôŢńéá, ç ńýčěéóç äéęôýďő ęáé internet ôĺëĺßůóĺ.\n"
-"\n"
-"Ďé ńőčěßóĺéň čá ĺöáńěďóôďýí ôţńá óôď óýóôçěÜ óáň.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Áöďý ăßíĺé áőôü, đńďôĺßíďőěĺ íá îáíáîĺęéíŢóĺôĺ ôď ×\n"
-"đĺńéâÜëëďí ăéá íá áđďöýăĺôĺ ôá đńďâëŢěáôá áëëáăŢň hostname."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ĐŃĎÓĎ×Ç: ÁőôŢ ç óőóęĺőŢ ĺßíáé Ţäç ńőčěéóěÝíç ăéá íá óőíäÝĺôáé ěĺ ôď "
-"Äéáäßęôőď.\n"
-"ÁđëÜ đáôŢóôĺ OK ăéá íá ęńáôŢóĺôĺ ôéň őđÜń÷ďőóĺň ńőčěßóĺéň.\n"
-"ÁëëÜćďíôáň ôá đáńáęÜôů đĺäßá čá áëëÜîĺôĺ ôçí őđÜń÷ďőóá ńýčěéóç."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Đáńáęáëţ ĺéóÜăĺôĺ ôéň IP ńőčěßóĺéň ăéá áőôü ôď óýóôçěá.\n"
-"ĘÜčĺ óôďé÷ĺßď đńÝđĺé íá ĺéóá÷čĺß ůň IP äéĺýčőíóç óĺ ďęôáäéęŢ\n"
-"ěďńöŢ (đáńÜäĺéăěá: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ńýčěéóç óőóęĺőŢň äéęôýďő %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Äéĺýčőíóç IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "ĚÜóęá äéęôýďő"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Áőôüěáôď IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Ç IP äéĺýčőíóç đńÝđĺé íá ĺßíáé óĺ ěďńöŢ 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Đáńáęáëţ ĺéóÜăĺôĺ ôď üíďěá ôďő óőóôŢěáôďň.\n"
-"Ôď üíďěá áőôü đńÝđĺé íá ĺßíáé Ýíá đëŢńĺň üíďěá óőóôŢěáôďň,\n"
-"üđůň đ.÷. ``mybox.mylab.myco.com''.\n"
-"Ěđďńĺßôĺ ĺđßóçň íá ĺéóÜăĺôĺ ęáé ôçí äéĺýčőíóç IP ôçň đýëçň äéęôýďő"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "ĹîőđçńĺôçôŢň DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "ÓőóęĺőŢ đýëçň"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Ńőčěßóĺéň proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Ď proxy đńÝđĺé íá ĺßíáé http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Ď proxy đńÝđĺé íá ĺßíáé ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Ńőčěßóĺéň Äéáäéęôýďő (Internet)"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "ČÝëĺôĺ íá äďęéěÜóĺôĺ íá óőíäĺčĺßôĺ óôď Äéáäßęôőď ôţńá;"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "ÄďęéěŢ óýíäĺóçň... "
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ôď óýóôçěá äĺí ĺßíáé óőíäĺäĺěÝíď óôď Äéáäßęôőď."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Ăéá ëüăď ÁóöÜëĺéáň, čá áđďóőíäĺčĺßôĺ ôţńá."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Ôď óýóôçěÜ óáň äĺí öáßíĺôáé íá ĺßíáé óőíäĺäĺěÝíď óôď Äéáäßęôőď.\n"
-"ÄďęéěÜóôĺ íá ĺđáíáńőčěßóĺôĺ ôçí óýíäĺóŢ óáň."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Ńőčěßóĺéň óëőíäĺóçň"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Đáńáęáëţ ĺëÝăîôĺ Ţ óőěđëçńţóôĺ ôď đáńáęÜôů đĺäßď"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ ęÜńôáň"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "DMA ęÜńôáň"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO ęÜńôáň"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 ęÜńôáň"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 ęÜńôáň"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Đńďóůđéęüň áńéčěüň ôçëĺöţíďő"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "źíďěá đáńď÷Ýá (đ.÷. provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Áńéčěüň ôçëĺöţíďő đáńď÷Ýá"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provider dns 1 (đńďáéńĺôéęü)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provider dns 2 (đńďáéńĺôéęü)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "ĹđéëÝîôĺ đëçęôńďëüăéď"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Ôńüđďň ęëŢóçň"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Ôá÷ýôçôá óýíäĺóçň"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "×ńüíďň óýíäĺóçň: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "'Ďíďěá ëďăáńéáěďý (user name)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Óőíčçěáôéęü ëďăáńéáóěďý"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "óýíäĺóç áđÝôő÷ĺ: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ç ĺęôĺôáěÝíç ęáôÜôěçóç äĺí őđďóôçńßćĺôáé óĺ áőôüí ôďí ôýđď óőóôŢěáôďň"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"ŐđÜń÷ĺé Ýíá ęĺíü óôďí đßíáęá ęáôáôěŢóĺůí ěá äĺí ěđďńţ íá ôď ÷ńçóéěďđďéŢóů.\n"
-"Ç ěďíáäéęŢ ëýóç ĺßíáé íá ěĺôáęéíŢóĺôĺ ôéň đńůôĺýďőóĺň ęáôáôěŢóĺéň óáň Ýôóé "
-"ţóôĺ ôď ęĺíü íá âńĺčĺß äßđëá óôçí ĺęôĺôáěÝíç ęáôÜôěçóç"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ç ĺđáíáöďńÜ áđü ôď áń÷ĺßď %s áđÝôő÷ĺ: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "ÓöÜëěá ĺăăńáöŢň óôď áń÷ĺßď %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"ĘÜôé ęáęü óőěâáßíĺé óôď äßóęď óáň. \n"
-"¸íá ôÝóô ĺëÝă÷ďő ôçň áęĺńáéüôçôáň ôůí äĺäďěÝíůí áđÝôő÷ĺ. \n"
-"Áőôü óçěáßíĺé đůň ç ďđďéáäŢđďôĺ ĺăăńáöŢ óôď äßóęď čá ęáôáëŢîĺé óáí ôő÷áßá "
-"óęďőđßäéá"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "đńÝđĺé íá őđÜń÷ĺé"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "óçěáíôéęü"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "đďëý ęáëü"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "ęáëü"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ßóůň"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Ôďđéęüň ĺęôőđůôŢň"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺîőđçńĺôçôŢň CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺîőđçńĺôçôŢň lpd"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "ĹęôőđůôŢň äéęôýďő (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "ĹîőđçńĺôçôŢň ĺęôőđţóĺůí"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "ÓőóęĺőŢ ĺęôőđůôŢ URI"
-
-#: ../../printer.pm_.c:55
-#, fuzzy
-msgid "Pipe job into a command"
-msgstr "ÄéáóůëŢíůóç óôçí ĺíôďëŢ"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Ôďđéęüň ĺęôőđůôŢň"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "ÓöÜëěá ĺăăńáöŢň óôď áń÷ĺßď %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(module %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP äéĺýčőíóç ĺîőđçńĺôçôŢ CUPS:"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (ĹđéëďăŢ ĺî' ďńéóěďý)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Ôńüđďň óýíäĺóçň ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Đţň ĺßíáé óőíäĺäĺěÝíďň ď ĺęôőđůôŢň óáň;"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Ěĺ ôçí ÷ńŢóç ĺîőđçńĺôçôŢ CUPS, äĺí ÷ńĺéÜćĺôáé íá ńőčěßóĺôĺ ĺęôőđůôÝň \n"
-"ĺäţ. Ďé ĺęôőđůôÝň čá áíáăíůńéóôďýí áőôüěáôá, ĺęôüň áí Ý÷ĺôĺ ĺîőđçńĺôçôŢ\n"
-"óĺ äéáöďńĺôéęü äßęôőď. Óĺ áőôŢí ôçí đĺńßđôůóç, čá đńÝđĺé íá äçëţóĺôĺ ôçí\n"
-"IP äéĺýčőíóç ôďő ĺîőđçńĺôçôŢ CUPS ęáé ßóůň ęáé ôďí áńéčěü čýńáň."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Ńýčěéóç LÁÍ"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺîőđçńĺôçôŢň CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Ç IP äéĺýčőíóç đńÝđĺé íá ĺßíáé óĺ ěďńöŢ 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Ď áńéčěüň čýńáň đńÝđĺé íá ĺßíáé áęÝńáéďň áńéčěüň!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP äéĺýčőíóç ĺîőđçńĺôçôŢ CUPS:"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Čýńá"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Boot Ôýđďő Ńýčěéóç"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Ĺíôďđéóěüň óőóęĺőţí..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "ÄďęéěŢ čőńţí"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "ĐńďóčŢęç ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Ôďđéęüň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "×ńŢóç áőôüěáôçň áíß÷íĺőóçň"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "áíé÷íĺýčçęĺ ôď %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "ÓőóęĺőŢ ĺęôőđůôŢ URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Ôďđéęüň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Óĺ đďéÜ óĺéńéáęŢ đüńôá ĺßíáé óőíäĺäĺěÝíď ôď modem óáň;"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "ÓőóęĺőŢ ĺęôőđůôŢ URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Ńőčěßóĺéň ÷ńůěÜôůí"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "ĹăęáôÜóôáóç đáęÝôďő %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "ĹăęáôÜóôáóç đáęÝôďő %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "ÁíÜăíůóç âÜóçň ďäçăţí CUPS"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "ÁíÜăíůóç âÜóçň ďäçăţí CUPS"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "ĹđéëďăÝň áđďěĺěáęńőóěÝíďő lpd ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Ăéá íá ÷ńçóéěďđďéŢóĺôĺ ěéá áđďěĺěáęńőóěÝíç ďőńÜ ĺęôýđůóçň\n"
-"lpd, đńÝđĺé íá äţóĺôĺ ôď äéęôőáęü üíďěá ôďő ĺîőđçńĺôçôŢ \n"
-"ĺęôőđţóĺůí, ęáčţň ęáé ôď üíďěá ôçň ďőńÜň ôçí ďđďßá čá \n"
-"÷ńçóéěďđďéŢóĺôĺ óĺ áőôüí ôďí ĺîőđçńĺôçôŢ."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "ÁđďěĺěáęńőóěÝíď äéęôőáęü üíďěá:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "ÁđďěĺěáęńőóěÝíď äéęôőáęü üíďěá ëĺßđĺé!"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "ÁđďěĺěáęńőóěÝíď äéęôőáęü üíďěá ëĺßđĺé!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "ĹđéëďăÝň ĺęôőđůôŢ SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Ăéá íá ĺęôőđţóĺôĺ óĺ Ýíáí SMB ĺęôőđůôŢ, đńÝđĺé íá äţóĺôĺ ôď \n"
-"SMB äéęôőáęü üíďěá (Óçěĺßůóç! Ěđďńĺß íá ĺßíáé äéáöďńĺôéęü áđü \n"
-"ôď äéęôőáęü üíďěá TCP/IP!) ęáé ßóůň ęáé ôçí äéĺýčőíóç IP ôďő \n"
-"ĺîőđçńĺôçôŢ ĺęôőđţóĺůí, ôď üíďěá ôďő ĺęôőđůôŢ óôďí ďđďßď ĺđéčőěĺßôĺ \n"
-"đńüóâáóç, ęáčţň ęáé ďđďéáäŢđďôĺ áđáńáßôçôç đëçńďöďńßá đĺńß ęůäéęďý \n"
-"÷ńŢóôç, ëÝîçň ęëĺéäß ęáé ôďěÝá Ţ ďěÜäáň ĺńăáóßáň."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Äéęôőáęü üíďěá SMB ĺîőđçńĺôçôŢ:"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP äéĺýčőíóç SMB ĺîőđçńĺôçôŢ:"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "źíďěá đüńďő:"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "ĎěÜäá ĺńăáóßáň:"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ĺßôĺ ôď üíďěá ôďő ĺîőđçńĺôçôŢ Ţ ç IP ôďő đńÝđĺé íá äďčďýí!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Ôď üíďěá ăéá ôçí Samba ëĺßđĺé!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "ĹđéëďăÝň ĺęôőđůôŢ NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Ăéá íá ĺęôőđţóĺôĺ óĺ Ýíáí ĺęôőđůôŢ NetWare, đńÝđĺé íá äţóĺôĺ\n"
-"ôď üíďěá ôďő ĺîőđçńĺôçôŢ ĺęôőđţóĺůí NetWare (Óçěĺßůóç! Ěđďńĺß\n"
-"íá ĺßíáé äéáöďńĺôéęü áđü ôď äéęôőáęü üíďěá TCP/IP!), \n"
-"ôď üíďěá ôďő ĺęôőđůôŢ óôďí ďđďßď ĺđéčőěĺßôĺ đńüóâáóç, ęáčţň ęáé\n"
-"ďđďéáäŢđďôĺ áđáńáßôçôç đëçńďöďńßá đĺńß ęůäéęďý ÷ńŢóôç ęáé ëÝîçň ęëĺéäß."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "ĹîőđçńĺôçôŢň ĺęôőđţóĺůí"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "źíďěá ďőńÜň ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Ôď üíďěá ôďő ĺîőđçńĺôçôŢ NCP ëĺßđĺé!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Ôď üíďěá ôçň NCP ďőńÜň ëĺßđĺé!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "ĹđéëďăÝň ĺęôőđůôŢ socket"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Ăéá íá ĺęôőđţóĺôĺ óĺ Ýíáí ĺęôőđůôŢ socket, đńÝđĺé íá äţóĺôĺ ôď \n"
-"äéęôőáęü üíďěá ôďő ĺęôőđůôŢ ęáé đńďáéńĺôéęÜ ôďí áńéčěü čýńáň."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "źíďěá ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "źíďěá ĺęôőđůôŢ ëĺßđĺé!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "ÓőóęĺőŢ ĺęôőđůôŢ URI"
-
-#: ../../printerdrake.pm_.c:888
-#, fuzzy
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Ěđďńĺßôĺ íá ďńßóĺôĺ ęáôĺőčĺßáí ôď URI ăéá ôçí đńüóâáóç óôďí ĺęôőđůôŢ. Ôď URI "
-"đńÝđĺé íá ôçńĺß ĺßôĺ ôéň CUPS ĺßôĺ ôéň Foomatic đńďäéáăńáöÝň. ź÷é đůň äĺí "
-"őđďóôçńßćďíôáé üëďé ďé URI ôýđďé áđü üëá ôá spoolers."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "¸íá óůóôü URI đńÝđĺé íá ĺéóá÷čĺß!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"ĘÜčĺ ĺęôőđůçň ÷ńĺéÜćĺôáé Ýíá üíďěá (đ.÷. lp).\n"
-"Ôá đĺäßá ĐĺńéăńáöŢ ęáé Ôďđďčĺóßá äĺí ÷ńĺéÜćĺôáé íá \n"
-"óőěđëçńůčďýí. Ĺßíáé áđëÜ ó÷üëéá ăéá ôďőň ÷ńŢóôĺň."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "źíďěá ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "ĐĺńéăńáöŢ"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Ôďđďčĺóßá"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "ÁíÜăíůóç âÜóçň ďäçăţí CUPS"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Óůóôü;"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "ĹđéëďăŢ ěďíôÝëďő ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Ôß ôýđďő ĺęôőđůôŢ Ý÷ĺôĺ;"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Ńőčěßóĺéň Äéáäéęôýďő (Internet)"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Ńőčěßóĺéň Äéáäéęôýďő (Internet)"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "ĹđéëďăŢ %s đńÝđĺé íá ĺßíáé áęÝńáéďň áńéčěüň!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "ĹđéëďăŢ %s đńÝđĺé íá ĺßíáé áńéčěüň!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "ĹđéëďăŢ %s ĺęôüň ďńßďő!"
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "ČÝëĺôĺ íá ĺęôőđţóĺôĺ ěéá äďęéěáóôéęŢ óĺëßäá;"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "ÄďęéěŢ čőńţí"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "ĹęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ôőđéęü"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Ĺęôýđůóç äďęéěáóôéęţí óĺëßäůí..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Ĺęôýđůóç äďęéěáóôéęţí óĺëßäůí..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Ĺęôýđůóç äďęéěáóôéęţí óĺëßäůí..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Ĺęôýđůóç äďęéěáóôéęţí óĺëßäůí..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Ěßá Ţ đĺńéóóüôĺńĺň äďęéěáóôéęÝň óĺëßäĺň óôÜëčçęáí óôďí ĺęôőđůôŢ.\n"
-"Ěđďńĺß íá đĺńÜóĺé ęÜđďéďň ÷ńüíďň ěÝ÷ńé ç ĺęôýđůóç íá îĺęéíŢóĺé.\n"
-"ĘáôÜóôáóç ĺęôýđůóçň:\n"
-"%s\n"
-"\n"
-"¸ăéíĺ óůóôÜ ç ĺęôýđůóç"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Ěßá Ţ đĺńéóóüôĺńĺň äďęéěáóôéęÝň óĺëßäĺň óôÜëčçęáí óôďí ĺęôőđůôŢ.\n"
-"Ěđďńĺß íá đĺńÜóĺé ęÜđďéďň ÷ńüíďň ěÝ÷ńé ç ĺęôýđůóç íá îĺęéíŢóĺé.\n"
-"¸ăéíĺ óůóôÜ ç ĺęôýđůóç;"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "ĘáíÝíáň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Ęëĺßóéěď"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ÄéáęďđŢ ëĺéôďőńăßáň äéęôýďő."
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ÄéáęďđŢ ëĺéôďőńăßáň äéęôýďő."
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "ĹđéëďăÝň ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Ńőčěßóĺéň Äéáäéęôýďő (Internet)"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Ôď üíďěá ôďő ĺęôőđůôŢ đńÝđĺé íá đĺńéÝ÷ĺé ěüíď ăńÜěěáôá, áńéčěďýň ęáé ôďí "
-"÷áńáęôŢńá underscore"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "ĘáíÝíáň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "ÁíÜăíůóç âÜóçň ďäçăţí CUPS"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Ĺęęßíçóç óýíäĺóçň..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Ńýčěéóç äéęôýďő"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ç ďčüíç äĺí Ý÷ĺé ńőčěéóôĺß áęüěç"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Ńýčěéóç äéęôýďő"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Đďéü óýóôçěá ĺęôýđůóçň čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ;"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Őřçëü"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Đáńáíďúęü"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Đďéü óýóôçěá ĺęôýđůóçň čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ;"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "ĹđéëďăŢ Spooler EęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Đďéü óýóôçěá ĺęôýđůóçň čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ;"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Ńýčěéóç ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "ĹăęáôÜóôáóç đáęÝôďő %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "ĹđéëďăÝň ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Ńýčěéóç ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Čá čÝëáôĺ íá ńőčěßóĺôĺ Ýíáí ĺęôőđůôŢ;"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "ĹęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"ŐđÜń÷ďőí ďé áęüëďőčĺň ďőńÝň ĺęôýđůóçň.\n"
-"Ěđďńĺßôĺ íá đńďóčÝóĺôĺ ęé Üëëĺň Ţ íá áëëÜîĺôĺ ôéň őđÜń÷ďőóĺň."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"ŐđÜń÷ďőí ďé áęüëďőčĺň ďőńÝň ĺęôýđůóçň.\n"
-"Ěđďńĺßôĺ íá đńďóčÝóĺôĺ ęé Üëëĺň Ţ íá áëëÜîĺôĺ ôéň őđÜń÷ďőóĺň."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Ńýčěéóç äéęôýďő"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "ĘáíďíéęŢ ĘáôÜóôáóç"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "ČÝëĺôĺ íá äďęéěÜóĺôĺ ôéň ńőčěßóĺéň;"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Ńőčěßóĺéň Äéáäéęôýďő (Internet)"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "ČÝëĺôĺ íá äďęéěÜóĺôĺ ôéň ńőčěßóĺéň;"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Óýíäĺóç Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "ĹđéëďăŢ ěďíôÝëďő ĺęôőđůôŢ"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Ĺęôýđůóç äďęéěáóôéęţí óĺëßäůí..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "ČÝëĺôĺ íá äďęéěÜóĺôĺ ôéň ńőčěßóĺéň;"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Ôďđéęüň ĺęôőđůôŢň"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ČÝëĺôĺ íá ĺđáíĺęęéíŢóĺôĺ ôď äßęôőď;"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Ńýčěéóç proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Ęáëţň Ţëčáôĺ óôď ĺńăáëĺßď ńýčěéóçň ôďő proxy.\n"
-"\n"
-"Ĺäţ, čá ěđďńÝóĺôĺ íá ńőčěßóĺôĺ ôďőň http ęáé ftp proxies\n"
-"ěĺ Ţ ÷ůńßň login ęáé ęůäéęü đńüóâáóçň\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Đáńáęáëţ óőěđëçńţóôĺ ôéň đëçńďöďńßĺň ăéá ôď http proxy\n"
-"ÁöŢóôĺ ôá ęĺíÜ áí äĺí ĺđéčőěĺßôĺ http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "đüńôá"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Ôď URL đńÝđĺé íá îĺęéíÜ ěĺ 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Ď áńéčěüň čýńáň đńÝđĺé íá ĺßíáé áńéčěçôéęüň"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Đáńáęáëţ óőěđëçńţóôĺ ôéň đëçńďöďńßĺň ăéá ôď ftp proxy\n"
-"ÁöŢóôĺ ôá ęĺíÜ áí äĺí ĺđéčőěĺßôĺ ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Ôď Url đńÝđĺé íá îĺęéíÜ ěĺ'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Đáńáęáëţ ĺéóÜăĺôĺ proxy login ęáé ęůäéęü đńüóâáóçň.\n"
-"ÁöŢóôĺ ôá ęĺíÜ ĺÜí äĺí ĺđéčőěĺßôĺ login/passwd"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "ęůäéęüň đńüóâáóçň"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "îáíáđëçęôńďëďăŢóôĺ ôďí ęůäéęü đńüóâáóçň"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Ďé ęůäéęďß đńüóâáóçň ĺßíáé áíüěďéďé. ĐńďóđáčŢóôĺ îáíÜ!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Äĺí ěđďńţ íá đńďóčÝóů ęáôÜôěçóç óôď _ěďńöďđďéçěÝíď_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Äĺí ěđďńţ íá áđďčçęĺýóů ôď áń÷ĺßď %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "áđďôő÷ßá mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "áđďôő÷ßá mkraid (ěŢđůň áđďőóéÜćďőí ôá raidtools;)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Äĺí őđÜń÷ďőí áńęĺôÝň ęáôáôěŢóĺéň ăéá RAID ĺđéđÝäďő %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Ĺęęßíçóç ôďő ALSA (Advanced Linux Sound Architecture) óőóôŢěáôďň Ţ÷ďő"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, Ýíá đńüăńáěěá đĺńéďäéęŢň ĺęôÝëĺóçň ĺíôďëţí."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Ôď apmd đáńáęďëďőčĺß ęáé ęáôáăńÜöĺé ôçí ęáôÜóôáóç ôçň ěđáôáńßáň.\n"
-"Ěđďńĺß ĺđßóçň íá ÷ńçóéěďđďéçčĺß ăéá ôď áőôüěáôď ęëĺßóéěď ôďő óőóôŢěáôďň óĺ \n"
-"đĺńßđôůóç ÷áěçëŢň öüńôéóçň ôçň ěđáôáńßáň."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ĺęôĺëĺß ĺíôďëÝň đńďăńáěěáôéóěÝíĺň áđü ôçí ĺíôďëŢ at ęáé äÝóěĺň ĺíôďëţí\n"
-"üôáí ď öüńôďň ôďő óőóôŢěáôďň ĺßíáé áńęĺôÜ ÷áěçëüň."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Ôď cron ĺßíáé ěéá âáóéęŢ őđçńĺóßá UNIX đďő ôńÝ÷ĺé ĺíôďëÝň ęáčďńéóěÝíĺň áđü \n"
-"ôďí ÷ńŢóôç óĺ ôáęôÜ ÷ńďíéęÜ äéáóôŢěáôá. Ôď vixie cron đńďóčÝôĺé Ýíáí "
-"áńéčěü \n"
-"ĺđéđëÝďí äőíáôďôŢôůí đďő đĺńéëáěâÜíďőí ęáëýôĺńç áóöÜëĺéá ęáé đéď éó÷őńÝň "
-"ńőčěßóĺéň."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Ôď GPM đńďóčÝôĺé őđďóôŢńéîç mouse óĺ ĺöáńěďăÝň âáóéóěÝíĺň óĺ ęďíóüëá\n"
-"ęĺéěÝíďő ęáé ĺđéôńÝđĺé ëĺéôďőńăßĺň áđďęďđŢň ęáé ĺđéęüëëçóçň ěĺ ÷ńŢóç \n"
-"mouse óôçí ęďíóüëá, ęáčţň ęáé őđďóôŢńéîç áíáäőďěÝíůí menu."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Ôď HardDrake ôńÝ÷ĺé ěéá áíß÷íĺőóç őëéęďý ęáé đńďáéńĺôéęÜ ńőčěßćĺé\n"
-"ôď íÝď/áëëáăěÝíď őëéęü."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Ď Apache ĺßíáé Ýíáň ĺîőđçńĺôçôŢň WWW. Ěđďńĺß íá ĺîőđçńĺôŢóĺé áń÷ĺßá\n"
-"HTML ęáé CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Ç őđçńĺóßá őđĺńĺîőđçńĺôçôŢ Internet (inetd) îĺęéíÜĺé ěéá đďéęéëßá\n"
-"Üëëůí őđçńĺóéţí inetrnet üđďôĺ ÷ńĺéÜćďíôáé. Ĺßíáé őđĺýčőíç ăéá ôçí \n"
-"ĺęęßíçóç đďëëţí őđçńĺóéţí, üđůň telnet, ftp, rsh ęáé rlogin. Ç "
-"áđĺíĺńăďđďßçóç\n"
-"áőôŢň ôçň őđçńĺóßáň áđĺíĺńăďđďéĺß ĺđßóçň ęáé ôéň őđçńĺóßĺň ăéá ôéň ďđďßĺň\n"
-"ĺßíáé őđĺýčőíç."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Ĺęęßíçóç đáęÝôďő filtering ăéá Linux đőńŢíá ôçň óĺéńÜň 2.2, ăéá ńýčěéóç\n"
-"ĺíüň firewall đďő čá đńďóôáôĺýĺé ôď ěç÷ÜíçěÜ óáň áđü äéęôőáęÝň ĺđéčÝóĺéň."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Áőôü ôď đáęÝôď öďńôţíĺé ôçí ĺđéëĺăěÝíç äéáńýčěéóç đëçęôńďëďăßďő đďő Ý÷ĺé \n"
-"ĺđéëĺăĺß óôď /etc/sysconfig/keyboard. Áőôü ěđďńĺß íá ńőčěéóôĺß ěĺ ôçí \n"
-"÷ńŢóç ôďő ĺńăáëĺßďő kbdconfig. ĐńÝđĺé ó÷ĺäüí đÜíôá íá ĺßíáé ĺíĺńăďđďéçěÝíď."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Áőôüěáôç đáńáăůăŢ ôçň ĺđéęĺöáëßäáň ôďő đőńŢíá óôď /boot ăéá ôď\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Áőôüěáôç áíß÷íĺőóç ęáé ńýčěéóç óőóęĺőţí ęáôÜ ôçí ĺęęßíçóç ôďő óőóôŢěáôďň."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Ôď Linuxconf ęáěéÜ öďńÜ ęÜíĺé äéÜöďńĺň ĺńăáóßĺň\n"
-"ęáôÜ ôçí ĺęęßíçóç ôďő óőóôŢěáôďň ăéá íá äéáôçńŢóĺé ôç ńýčěéóç ôďő óőóôŢěáôďň."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Ôď lpd ĺßíáé ç őđçńĺóßá ĺęôőđţóĺůí đďő áđáéôĺßôáé ăéá íá ëĺéôďőńăĺß \n"
-"ç ĺíôďëŢ lpd. Ĺßíáé âáóéęÜ Ýíáň ĺîőđçńĺôçôŢň đďő đńďůčĺß ôá áń÷ĺßá \n"
-"óôďőň ĺęôőđůôÝň."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual ĹîőđçńĺôçôŢň, ÷ńçóéěďđďéĺßôáé ăéá íá äçěéďőńăŢóĺé Ýíáí őřçëŢň\n"
-"áđüäďóçň ęáé äéáčĺóéěüôçôáň ĺîőđçńĺôçôŢ."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Ď named (BIND) ĺßíáé Ýíáň Domain Name Server (DNS) đďő ÷ńçóéěďđďéĺßôáé\n"
-"ăéá íá ěĺôáôńÝđĺé ďíüěáôá óĺ äéĺőčýíóĺéň IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"ÓőíäÝĺé ęáé áđďóőíäÝĺé üëá ôá äéęôőáęÜ óőóôŢěáôá áń÷ĺßůí (NFS, \n"
-"SMB ęáé NCP (Netware))."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ĺíĺńăďđďéĺß/áđĺíĺńăďđďéĺß üëá ôá őđďóőóôŢěáôá äéęôýďő đďő Ý÷ďőí \n"
-"ńőčěéóôĺß íá îĺęéíďýí ęáôÜ ôçí ĺęęßíçóç."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Ôď NFS ĺßíáé Ýíá äçěďöéëÝň đńůôüęďëď ăéá ôďí äéáěďéńáóěü áń÷ĺßůí óĺ \n"
-"äßęôőá TCP/IP. ÁőôŢ ç őđçńĺóßá đńďóöÝńĺé ëĺéôďőńăßĺň ĺîőđçńĺôçôŢ, ď \n"
-"ďđďßďň ńőčěßćĺôáé áđü ôď áń÷ĺßď /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Ôď NFS ĺßíáé Ýíá äçěďöéëÝň đńůôüęďëď ăéá ôďí äéáěďéńáóěü áń÷ĺßůí óĺ \n"
-"äßęôőá TCP/IP. ÁőôŢ ç őđçńĺóßá đńďóöÝńĺé ëĺéôďőńăßĺň ęëĺéäţěáôďň áń÷ĺßůí."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Áőôüěáôç ĺíĺńăďđďßçóç ôďő numlock đëŢęôńďő óôçí ęďíóüëá\n"
-"ęáé ôá XFree ęáôá ôçí ĺęęßíçóç ôďő óőóôŢěáôďň."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ŐđďóôŢńéîç ôůí OKI 4w ęáé óőěâáôţí winprinters."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"Ç őđďóôŢńéîç PCMCIA đńďóöÝńĺé őđďóôŢńéîç ăéá ęÜńôĺň äéęôýďő, modems ęëđ \n"
-"óőíŢčůň óĺ óőóôŢěáôá laptop. Äĺí čá ĺęęéíŢóĺé ĺęôüň áí áőôü ćçôçčĺß áđü "
-"ôďí \n"
-"÷ńŢóôç, ďđüôĺ ĺßíáé áóöáëÝň íá ĺăęáôáóôáčĺß óĺ óőóôŢěáôá đďő äĺí ôď "
-"÷ńĺéÜćďíôáé."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ď portmapper äéá÷ĺéńßćĺôáé óőíäÝóĺéň RPC, ďé ďđďßĺň ÷ńçóéěďđďéďýíôáé\n"
-"áđü đńďôüęďëá üđůň ôď NFS ęáé ôď NIS. ĐńÝđĺé íá ĺßíáé ĺíĺńăďđďéçěÝíď óĺ \n"
-"óőóôŢěáôá đďő äńďőí ůň ĺîőđçńĺôçôÝň ôÝôďéůí đńďôďęüëůí."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Ôď postfix ĺßíáé Ýíáň đńÜęôďńáň ěĺôáöďńÜň áëëçëďăńáößáň, ôď \n"
-"đńüăńáěěá đďő öńďíôßćĺé ăéá ôçí ěĺôáöďńÜ áëëçëďăńáößáň áđü ôď \n"
-"Ýíá óýóôçěá óôď Üëëď."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Áđďčçęĺýĺé ęáé ĺđáíáöÝńĺé ôçí đçăŢ ĺíôńďđßáň ôďő óőóôŢěáôďň ăéá \n"
-"ôçí äçěéďőńăßá ęáëýôĺńçň đďéüôçôáň ôő÷áßůí áńéčěţí."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Ďńéóěüň raw óőóęĺőţí ůň block óőóęĺőţí (üđůň ęáôáôěŢóĺéň óęëçńţí\n"
-"äßóęůí), ăéá ôç ÷ńŢóç ôďőň áđü ĺöáńěďăÝň üđůň ç Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Ç őđçńĺóßá routed ĺđéôńÝđĺé ôçí áőôüěáôç ĺíçěÝńůóç ôďő đßíáęá äńďěďëüăçóçň \n"
-"IP ěÝóů ôďő đńůôďęüëďő RIP. Đáń' üëď đďő ôď RIP ĺßíáé ĺőńÝůň äéáäĺäďěÝíď "
-"óĺ \n"
-"ěéęńÜ äßęôőá, ěĺăáëýôĺńá äßęôőá áđáéôďýí đĺńéđëďęüôĺńá đńďôüęďëá."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ôď đńůôüęďëď rstat ĺđéôńÝđĺé óôďőň ÷ńŢóôĺň ĺíüň äéęôýďő ôçí\n"
-"óőëëďăŢ ěĺôńŢóĺůí ĺđéäüóĺůí ăéá ďđďéďäŢđďôĺ óýóôçěá óĺ áőôü \n"
-"ôď äßęôőď."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ôď đńůôüęďëď rusers ĺđéôńÝđĺé óôďőň ÷ńŢóôĺň ĺíüň äéęôýďő íá \n"
-"đńďóäéďńßóďőí ôďőň óőíäĺäĺěÝíďőň ÷ńŢóôĺň Üëëůí óőóôçěÜôůí."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Ôď đńůôüęďëď rwho ĺđéôńÝđĺé óĺ áđďěĺěáęńőóěÝíďőň ÷ńŢóôĺň íá äďőí Ýíáí \n"
-"ęáôÜëďăď ôůí ÷ńçóôţí ôďő óőóôŢěáôďň (đáńüěďéď ěĺ ôď finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Ĺęęßíçóç ôďő óőóôŢěáôďň Ţ÷ďő óôď ěç÷ÜíçěÜ óáň"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Ôď Syslog ĺßíáé ç őđçńĺóßá đďő ÷ńçóéěďđďéďýí đďëëÝň Üëëĺň őđçńĺóßĺň \n"
-"ăéá íá ęÜíďőí ĺăăńáöÝň óôá áń÷ĺßá đáńáęďëďýčçóçň óőóôŢěáôďň (log files)\n"
-"Óőíßóôáôáé ç óőíĺ÷Ţň ëĺéôďőńăßá áőôŢň ôçň őđçńĺóßáň."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Öüńôůóç ôůí ďäçăţí ăéá ôéň usb óőóęĺőÝň óáň."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"ÎĺęéíÜĺé ôçí őđçńĺóßá ĺîőđçńĺôçôŢ ăńáěěáôďóĺéńţí X Font Server (áőôü ĺßíáé "
-"áđáńáßôçôď ăéá íá ôńÝ÷ďőí ôá XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "ĹęôőđůôŢň"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Éíôĺńíĺô"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "ĘáôÜóôáóç óőóôŢěáôďň"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "ĹđéëďăÝň áđďěĺěáęńőóěÝíďő lpd ĺęôőđůôŢ"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "ÂÜóç ÄĺäďěÝíůí"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "ĹîőđçńĺôçôŢň"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Đńďĺéäďđďßçóç"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Append"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "ĘáôÜóôáóç:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "ÔďěÝáň"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Őđüëďéđďň ęüóěďň"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Đńüóâáóç óôď Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "ĐďëőěÝóá - ĂńáöéęÜ"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "ÁíÜđôőîç"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "ĘÝíôńď ĹëÝă÷ďő"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "ÓőóęĺőŢ äéęôýďő"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Äéęôőáęü üíďěá SMB ĺîőđçńĺôçôŢ:"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Đáé÷íßäéá"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Ăéá ĺéäéęďýň"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "ĹăęáôÜóôáóç đáęÝôďő %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Äĺí ěđďńţ íá äéáâÜóů ôďí đßíáęá ęáôáôěŢóĺůí, ĺßíáé đďëý ęáôĺóôńáěÝíďň :(\n"
-"Čá đńďóđáčŢóů íá óőíĺ÷ßóů áöáéńţíôáň ôéň ëáíčáóěÝíĺň ęáôáôěŢóĺéň"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "ÓöÜëěá!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Ńőčěßóĺéň ěĺôÜ ôçí ĺăęáôÜóôáóç"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Boot Ôýđďő Ńýčěéóç"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Óőă÷áńçôŢńéá!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "ĹăęáôÜóôáóç"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "ĐńďóčŢęç ÷ńŢóôç"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Ěďńöďđďßçóç áń÷ĺßďő loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "ĹđéëďăŢ đáęÝôůí"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôá đáęÝôá đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "ÄéáăńáöŢ ďőńÜň"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Áöáßńĺóç Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Ęůäéęü üíďěá"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Đáńáęáëţ äďęéěÜóôĺ ôď đďíôßęé"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Đáńáęáëţ đńďóđáčŢóôĺ îáíÜ"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Đáńáęáëţ đńďóđáčŢóôĺ îáíÜ"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "îáíáđëçęôńďëďăŢóôĺ ôďí ęůäéęü đńüóâáóçň"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Óýíäĺóç LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Ôńüđďň óýíäĺóçň ĺęôőđůôŢ"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ äéáńýčěéóç đëçęôńďëďăßďő."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Đáńáęáëţ ęÜíôĺ ęëéę óĺ ěéá ęáôÜôěçóç"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôá đáęÝôá đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Đáńáęáëţ äďęéěÜóôĺ ôď đďíôßęé"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "ÓőóęĺőŢ äéęôýďő"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Ęůäéęü üíďěá"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôá đáęÝôá đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ěéá ăëţóóá."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Ĺíôďđéóěüň óęëçńďý äßóęďő"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Ęůäéęü üíďěá"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Ěĺ ńďäÜęé"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Ěĺ ńďäÜęé"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "ĐáńÜěĺôńďé ďäçăďý"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Ńőčěßóĺéň äéęôýďő"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôá đáęÝôá đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôá đáęÝôá đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Đńďĺô. óőó. áń÷."
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "ĹđéëďăÝň"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Óĺ đďéÜ óĺéńéáęŢ đüńôá ĺßíáé óőíäĺäĺěÝíď ôď modem óáň;"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Ńőčěßóĺéň äéęôýďő"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôýđď đďíôéęéďý."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "ĹđáíáöďńÜ áđü äéóęÝôôá"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôýđď đďíôéęéďý."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "śëëď"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "ĹăęáôÜóôáóç óőóôŢěáôďň"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "ĹđáíáöďńÜ áđü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "ĹđáíáöďńÜ áđü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "ĐńďóáńěďóěÝíď"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_ÂďŢčĺéá"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Đńďçăďýěĺíď"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "ĘáôÜóôáóç:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "ĹđáíáöďńÜ áđü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Ĺđüěĺíď -ť"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "ĹđéëďăŢ đáęÝôůí"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ěéá ăëţóóá."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ěéá ăëţóóá."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ěéá ăëţóóá."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "ÁđďčŢęĺőóç óĺ áń÷ĺßď"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Đáńáęáëţ äďęéěÜóôĺ ôď đďíôßęé"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôá đáęÝôá đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Ńőčěßóĺéň äéęôýďő"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Ńőčěßóĺéň äéęôýďő"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Ńýčěéóç LÁÍ"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Ńýčěéóç LÁÍ"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Đńďĺô. óőó. áń÷."
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Ç ĺăęáôÜóôáóç ôďő %s áđÝôő÷ĺ. ĐńďęëŢčçęĺ ôď áęüëďőčď óöÜëěá:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "äĺí âńÝčçęĺ đńďóáńěďăÝáň äéęôýďő"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Ďëďęëçńţčçęĺ"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Đńďĺôďéěáóßá ĺăęáôÜóôáóçň"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "áđáăüńĺőóç"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Ěďńöďđ. ęáôáôěŢó."
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Ńýčěéóç LÁÍ"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Óçěĺßď óýíäĺóçň"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "ĹđéëÝîôĺ ęáôáôěŢóĺéň đńďň ěďńöďđďßçóç"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Ăńáöĺßď"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Áęýńůóç"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "ĹęôőđůôŢň"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "ĹăęáôÜóôáóç óőóôŢěáôďň"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "ĹđéëÝîôĺ áń÷ĺßď"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "ĚŢíőěá Init"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Äĺí âńÝčçęĺ đńďóáńěďăÝáň äéęôýďő óôď óýóôçěÜ óáň!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "ĹăęáôÜóôáóç"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Äĺí âńÝčçęĺ đńďóáńěďăÝáň äéęôýďő óôď óýóôçěÜ óáň!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "¸îďäďň"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Ĺđéěĺńéóěüň óýíäĺóçň Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ĺđéěĺńéóěüň óýíäĺóçň Internet ĺíĺńăďđďéçěÝíďň"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ç ńýčěéóç ôďő ĺđéěĺńéóěďý óýíäĺóçň Internet Ý÷ĺé Ţäç ăßíĺé.\n"
-"ÁőôŢ ôç óôéăěŢ ĺßíáé ĺíĺńăŢ.\n"
-"\n"
-"Ôß čÝëĺôĺ íá ęÜíĺôĺ;"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "áđĺíĺńăďđďßçóç"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "Üęőńď"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ĺđáíáńýčěéóç"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Áđĺíĺńăďđďßçóç ĺîőđçńĺôçôţí..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Ĺđéěĺńéóěüň óýíäĺóçň Internet áđĺíĺńăďđďéçěÝíďň"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ĺđéěĺńéóěüň óýíäĺóçň Internet áđĺíĺńăďđďéçěÝíďň"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ç ńýčěéóç ôďő ĺđéěĺńéóěďý óýíäĺóçň Internet Ý÷ĺé Ţäç ăßíĺé.\n"
-"ÁőôŢ ôç óôéăěŢ ĺßíáé áíĺíĺńăüň.\n"
-"\n"
-"Ôß čÝëĺôĺ íá ęÜíĺôĺ;"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ĺíĺńăďđďßçóç"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Ĺíĺńăďđďßçóç ĺîőđçńĺôçôţí..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Ĺđéěĺńéóěüň óýíäĺóçň Internet ĺíĺńăďđďéçěÝíďň"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ď őđďëďăéóôŢň óáň ěđďńĺß íá ńőčěéóôĺß Ýôóé ţóôĺ íá ěďéńÜćĺôáé \n"
-"ôçí óýíäĺóç ěĺ ôď äéáäßęôőď ěĺ Üëëďőň őđďëďăéóôÝň.\n"
-"\n"
-"Óçěĺßůóç: ×ńĺéÜćĺóôĺ Ýíáí đńďóáńěďăÝá äéęôýďő Ýôóé ţóôĺ íá äçěéďőńăŢóĺôĺ Ýíá "
-"ôďđéęü äßęôőď (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "ÄéĺđéöÜíĺéá %s (÷ńŢóç áńčńţěáôďň %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "ÄéĺđéöÜíĺéá %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Äĺí âńÝčçęĺ đńďóáńěďăÝáň äéęôýďő óôď óýóôçěÜ óáň!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Äĺí âńÝčçęĺ đńďóáńěďăÝáň äéęôýďő Ethernet óôď óýóôçěÜ óáň. Đáńáęáëţ "
-"÷ńçóéěďđďéĺßóôĺ ôď đńüăńáěěá ńýčěéóçň őëéęďý."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "ÓőóęĺőŢ äéęôýďő"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"ŐđÜń÷ĺé ěüíď Ýíáň ńőčěéóěÝíďň đńďóáńěďăÝáň äéęôýďő óôď óýóôçěÜ óáň:\n"
-"\n"
-"%s\n"
-"\n"
-"Čá ńőčěéóôĺß ôď Ôďđéęü óáň Äßęôőď ěĺ áőôüí ôďí đńďóáńěďăÝá."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Đáńáęáëţ ĺđéëÝîôĺ ôé đńďóáńěďăÝáň äéęôýďő čá óőíäĺčĺß\n"
-"óôď ôďđéęü óáň äßęôőď."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Ç ďčüíç äĺí Ý÷ĺé ńőčěéóôĺß áęüěç"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Boot Ôýđďő Ńýčěéóç"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Ńőčěßóĺéň Äéáäéęôýďő (Internet)"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP äéĺýčőíóç ĺîőđçńĺôçôŢ CUPS:"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ĐéčáíŢ ĺđáíá÷ńçóéěďđďßçóç ôçň äéĺýčőíóçň LAN óôçí ôńÝ÷ďőóá ńýčěéóç ôďő %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Áíé÷íĺýôçęĺ ńýčěéóç firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Đńďóď÷Ţ! Áíé÷íĺýôçęĺ őđÜń÷ďőóá ńýčěéóç firewall. şóůň ÷ńĺéáóôďýí ďńéóěÝíĺň"
-"\"÷ĺéńďęßíçôĺň\" ńőčěßóĺéň ěĺôÜ ôçí ĺăęáôÜóôáóç."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Ńýčěéóç..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ńýčěéóç, ĺăęáôÜóôáóç ëďăéóěéęďý, ĺęęßíçóç ĺîőđçńĺôçôţí..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Đńüâëçěá ęáôÜ ôçí ĺăęáôÜóôáóç ôďő đáęÝôďő %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"'Ďëá Ý÷ďőí ńőčěéóôĺß.\n"
-"Ěđďńĺßôĺ ôţńá íá ěďéńÜćĺóôĺ ôçí óýíäĺóŢ óáň óôď Äéáäßęôőď ěĺ Üëëďőň "
-"őđďëďăéóôÝň óôď ôďđéęü óáň äßęôőď, ěĺ ôçí ÷ńŢóç áőôüěáôçň ńýčěéóçň äéęôýďő "
-"(DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Ç ńýčěéóç Ý÷ĺé Ţäç ăßíĺé, áëëÜ áőôŢ ôç óôéăěŢ ĺßíáé áđĺíĺńăďđďéçěÝíç."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Ç ńýčěéóç Ý÷ĺé Ţäç ăßíĺé, ęáé áőôŢ ôç óôéăěŢ ĺßíáé ĺíĺńăďđďéçěÝíç."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Ď Ĺđéěĺńéóěüň óýíäĺóçň Internet äĺí Ý÷ĺé ńőčěéóôĺß đďôÝ."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Ńýčěéóç ĺđéěĺńéóěďý óýíäĺóçň Äéáäéęôýďő (internet)"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Ęáëůň Ţëčáôĺ óôď ĺńăáëĺßď ńýčěéóçň ôďő Ĺđéěĺńéóěďý óýíäĺóçň Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"ĘÜíôĺ ęëßę óôď Ńýčěéóç ăéá íá îĺęéíŢóĺôĺ ôďí ďäçăü ĺăęáôÜóôáóçň."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ńýčěéóç äéęôýďő (%d adapters)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Đńďößë: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "ÄéáăńáöŢ đńďößë..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Đńďößë ăéá äéáăńáöŢ:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "ÍÝď đńďößë..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "źíďěá óőóôŢěáôďň: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Đńüóâáóç óôď Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Ôýđďň:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Đýëç äéęôýďő:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "ÄéĺđéöÜíĺéá:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "ĘáôÜóôáóç:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Ńýčěéóç Đńüóâáóçň óôď Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Ńýčěéóç LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ďäçăüň"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "ÄéĺđéöÜíĺéá"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Đńůôüęďëëď"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "ĘáôÜóôáóç:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Ńýčěéóç ôďđéęďý äéęôýďő..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "ĚÜăďň..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Ĺíĺńăďđďßçóç"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Đáńáęáëţ đĺńéěÝíĺôĺ... ĹöáńěďăŢ ńőčěßóĺůí"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "ÓőíäÝčçęĺ"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Äĺ óőíäÝčçęĺ"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Óýíäĺóç..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Áđďóýíäĺóç..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Äĺí Ý÷ĺôĺ ęÜđďéá ńőčéóěÝíç äéĺđéöÜíĺéá.\n"
-"Ńőčěßóôĺ ôéň ęÜíďíôáň ęëßę óôď 'Ńýčěéóç'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Ńýčěéóç LÁÍ"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "ĐńďóáńěďăÝáň %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Đńůôüęďëëď Ĺęęßíçóçň"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Îĺęßíçóáí óôçí ĺęęßíçóç óőóôŢěáôďň"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "đĺëÜôçň DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Äĺí Ý÷ĺôĺ óýíäĺóç ěĺ ôď internet.\n"
-"ÄçěéďőńăŢóôĺ ěßá ęÜíďíôáň ęëßę óôď 'Ńýčěéóç'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Ńýčěéóç óýíäĺóçň Äéáäéęôýďő (internet)"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Ńýčěéóç Óýíäĺóçň Äéáäéęôýďő (internet)"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Ôýđďň óýíäĺóçň: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "ĐáńÜěĺôńďé"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Đýëç äéęôýďő"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "ĘÜńôá Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "ĐĺëÜôçň DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Ńýčěéóç ĺđéđÝäďő áóöáëĺßáň"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "ĘÝíôńď ĹëÝă÷ďő"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "ĹđéëÝîôĺ ôď ĺńăáëĺßď đďő čÝëĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Ęáíáäéęü (ĘĺěđÝę)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Ĺőńţđç"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Éóëáíäéęü"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Ĺőńţđç"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "óĺéńéáęü"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "×ńŢóç: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ äéáńýčěéóç đëçęôńďëďăßďő."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "ČÝëĺôĺ ôď BackSpace íá ĺđéóôńÝöĺé Delete óôçí ęďíóüëá;"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "ÁëëáăŢ Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Đáńáęáëţ ĺéóÜăĺôĺ ôď CD ĺăęáôÜóôáóçň óôďí ďäçăü óáň ęáé đáôŢóôĺ Ďę.\n"
-"ĹÜí äĺí ôď Ý÷ĺôĺ, đáôŢóôĺ Áęýńůóç ăéá áđďöőăŢ äéęôőáęŢň áíáâÜčěéóçň."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Äĺí ěđďńţ íá îĺęéíŢóů ôď live upgrade!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Áń÷ĺßď/_ÍÝď"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Áń÷ĺßď/_Áíďéăěá"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Áń÷ĺßď/Áđď_čŢęĺőóç"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Áń÷ĺßď/ÁđďčŢęĺőóç _Ůň"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Áń÷ĺßď/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_ĹđéëďăÝň"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/ĹđéëďăÝň/ÔÝóô"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_ÂďŢčĺéá"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/ÂďŢčĺéá/_Ó÷ĺôéęÜ ěĺ..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Ęůäéęü üíďěá"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "ěçíýěáôá"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "áíáćŢôçóç"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "¸íá ĺńăáëĺßď ăéá íá âëÝđĺôĺ ôá log óáň"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Ńőčěßóĺéň"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "ôáéńéÜćĺé"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "äĺí ôáéńéÜćĺé"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "ĹđéëÝîôĺ Ýíá áń÷ĺßď"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Çěĺńďëüăéď"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Đĺńéĺ÷üěĺíď ôďő áń÷ĺßďő"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "đáńáęáëţ đĺńéěÝíĺôĺ, ĺđĺîĺńăáóßá áń÷ĺßďő: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "ĹëáöńéÜ ńýčěéóç"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Ęáëţň Ţëčáôĺ óôď ĺńăáëĺßď ńýčěéóçň ôďő proxy.\n"
-"\n"
-"Ĺäţ, čá ěđďńÝóĺôĺ íá ńőčěßóĺôĺ ôďőň http ęáé ftp proxies\n"
-"ěĺ Ţ ÷ůńßň login ęáé ęůäéęü đńüóâáóçň\n"
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "ĹîőđçńĺôçôŢň"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Ěďńöďđďßçóç"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Ńőčěßóĺéň ÷ńůěÜôůí"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "ÁđďčŢęĺőóç Ůň"
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôýđď đďíôéęéďý."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "äĺí âńÝčçęĺ serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Ĺîďěďßůóç ôńßôďő đëŢęôńďő;"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "ĹđéëÝîôĺ ęÜńôá ăńáöéęţí"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "ÓőóęĺőŢ ĺęęßíçóçň"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Ńýčěéóç Firewalling"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Ńýčěéóç firewalling"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"¸÷ĺôĺ Ţäç óôçěěÝíď Ýíá firewall.\n"
-"ĘÜíôĺ ęëßę óôď Ńýčěéóç ăéá íá áëëÜîĺôĺ Ţ íá äéáăńÜřĺôĺ ôď firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Firewalling\n"
-"\n"
-"ĘÜíôĺ ęëßę óôď Ńýčěéóç ăéá íá óôŢóĺôĺ Ýíá ôőđéęü firewall"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "ĹđéëÝîôĺ ăëţóóá"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "ĹđéëÝîôĺ ĺăęáôÜóôáóç"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Ĺíôďđéóěüň óęëçńďý äßóęďő"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Ńýčěéóç đďíôéęéďý"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "ĹđéëÝîôĺ đëçęôńďëüăéď"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "ÁóöÜëĺéá"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Đńďĺô. óőó. áń÷."
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Ěďńöďđ. ęáôáôěŢó."
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "ĹđéëďăŢ đáęÝôůí"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "ĹăęáôÜóôáóç óőóôŢěáôďň"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "ĐńďóčŢęç ÷ńŢóôç"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Ńýčěéóç äéęôýďő"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Ńýčěéóç őđçńĺóéţí"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Ĺăę. đń. ĺęęßíçóçň"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "ÄéóęÝôá ĺęęßíçóçň"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Ńýčěéóç ×"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "ĹăęáôÜóôáóç óőóôŢěáôďň"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "¸îďäďň"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"ńýčěéóç tinyfirewall\n"
-"\n"
-"Áőôü ńőčěßćĺé ôď đńďóůđéęü óáň firewall ăéá áőôü ôď ěç÷Üíçěá Mandrake "
-"Linux.\n"
-"Ăéá ěéá éó÷őńŢ áöďóéůěÝíç ëýóç firewall, đáńáęáëţ ęďéôÜîôĺ óôçí\n"
-"ĺéäéęĺőěÝíç MandrakeSecurity Firewall äéáíďěŢ."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ôţńá čá óáň ęÜíďőěĺ ĺńůôŢóĺéň ăéá ôď đďéÝň őđçńĺóßĺň čÝëĺôĺ íá áöŢóĺôĺ\n"
-"íá óőíäÝďíôáé óôď Internet. Đáńáęáëţ óęĺöôĺßôĺ đńďóĺęôéęÜ ăéá áőôÝň ôéň\n"
-"ĺńůôŢóĺéň, ęáčţň ç áóöÜëĺéá ôďő őđďëďăéóôŢ óáň ĺßíáé óçěáíôéęŢ.\n"
-"\n"
-"Đáńáęáëţ, áí ôçí ôńÝ÷ďőóá óôéăěŢ äĺí ÷ńçóéěďđďéĺßôĺ ęÜđďéá áđü áőôÝň ôéň "
-"őđçńĺóßĺň,\n"
-"âăÜëôĺ ôçí áđü ôď firewall. Ěđďńĺßôĺ íá áëëÜîĺôĺ áőôÝň ôéň ńőčěßóĺéň "
-"ďđďéáäŢđďôĺ\n"
-"óôéăěŢ čÝëĺôĺ îáíáôńÝ÷ďíôáň áőôŢí ôçí ĺöáńěďăŢ!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"ÔńÝ÷ĺôĺ Ýíáí ĺîőđçńĺôçôŢ web óĺ áőôü ôď ěç÷Üíçěá đďő ÷ńĺéÜćĺóôĺ íá ôďí "
-"âëÝđĺé\n"
-"ďëüęëçńď ôď internet; Áí ôńÝ÷ĺôĺ Ýíáí ĺîőđńĺôçôŢ web đďő ěüíď áőôü ôď "
-"ěç÷Üíçěá\n"
-"÷ńĺéÜćĺôáé íá ôďí âëÝđĺé, ôüôĺ ěđďńĺßôĺ íá áđáíôŢóĺôĺ Ď×É ěĺ áóöÜëĺéá ĺäů.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"ÔńÝ÷ĺôĺ name ĺîőđçńĺôçôŢ óĺ áőôü ôď ěç÷Üíçěá; Áí äĺí ńőčěßóáôĺ Ýíáí\n"
-"ţóôĺ íá äßíĺé IP ęáé đëçńďöďńßĺň ćţíçň óĺ üëď ôď internet, đáńáęáëţ\n"
-"áđáíôŢóôĺ ü÷é.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping.äĺí ĺßíáé\n"
-"ęńőđôďăńáöçěÝíď -- ďđüôĺ ęÜđďéďé ôáńáîßĺň ěđďńďýí íá ęëÝřďőí ôďí ęůäéęü\n"
-"đńüóâáóçň áí ôď ÷ńçóéěďđďéĺßôĺ. To ssh ĺßíáé ęńőđôďăńáöçěÝíď ęáé äĺí ôď "
-"ĺđéôńÝđĺé áőôü."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"ČÝëĺôĺ íá ĺđéôńÝřĺôĺ ĺéóĺń÷üěĺíĺň óőíäÝóĺéň telnet;\n"
-"Áőôü ĺßíáé ôńáăéęÜ ěç áóöáëÝň, üđůň ĺîçăŢóáěĺ óôçí đńďçăďýěĺíç ďčüíç.\n"
-"Đńďôĺßíďőěĺ íá áđáíôŢóĺôĺ ü÷é ĺäţ ęáé íá ÷ńçóéěďđďéŢóĺôĺ ôď ssh óôç čÝóç "
-"ôďő\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"ÔńÝ÷ĺôĺ Ýíáí FTP ĺîőđçńĺôçôŢ đďő ÷ńĺéÜćĺôáé íá ĺßíáé đńďóâÜóéěďň óôď "
-"Internet;\n"
-"Ĺáí íáé, ôüôĺ đńďôĺßíďőěĺ íá ôď ÷ńçóéěďđďéĺßôĺ ăéá Áíţíőěĺň ěĺôáöďńÝň. "
-"ĎđďéäŢđďôĺ\n"
-"ęůäéęďß đńüóâáóçň óôÝëíďíôáé áđü ôď FTP ěđďńďýí íá ęëáđďýí áđü ęÜđďéďőň "
-"ôáńáîßĺň,\n"
-"áöďý ôď FTP ĺđßóçň äĺí ÷ńçóéěďđďéĺß ęńőđôďăńÜöçóç ăéá ôçí ěĺôáöďńÜ ęůäéęţí "
-"đńüóâáóçň\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"ÔńÝ÷ĺôĺ Ýíáí ĺîőđçńĺôçôŢ ôá÷őäńďěĺßďő ĺäţ; Ĺáí óôÝëíĺôĺ ôá \n"
-"ěçíýěáôÜ óáň ěÝóů pine, mutt Ţ Üëëďő đĺëÜôç ôá÷őäńďěĺßďő áđü ôçí ęďíóüëá,\n"
-"ôüôĺ đéčáíüí íá ôńÝ÷ĺôĺ. Áëëéţň čá đńÝđĺé íá ôď đĺńéďńßóĺôĺ ěĺ firewall "
-"áőôü.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"ÔńÝ÷ĺôĺ Ýíáí POP Ţ IMAP ĺîőđçńĺôçôŢ ĺäţ; Áőôü ÷ńçóéěďđďéĺßôáé\n"
-"ăéá đáńď÷Ţ ëďăáńéáóěţí ôá÷őäńďěĺßďő ěç âáóéóěÝíďő óôď web ăéá áíčńţđďőň \n"
-"ěÝóů áőôďý ôďő ěç÷áíŢěáôďň.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Öáßíĺôáé đůň ôńÝ÷ĺôĺ Ýíáí 2.2 đőńŢíá. ĹÜí ç IP óáň\n"
-"ĺßíáé äőíáěéęŢ, đńÝđĺé íá ôď ĺđéôńÝřďőěĺ áőôü. Ĺßíáé áőôŢ \n"
-"ç đĺńßđôůóŢ óáň;\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Óőă÷ńďíßćĺôáé ç ţńá ôďő őđďëďăéóôŢ óáň ěĺ Üëëďí őđďëďăéóôŢ;\n"
-"Đĺńéóóüôĺńď, áőôü ÷ńçóéěďđďéĺßôáé áđü ěĺăáëďěĺóáßďőň ďńăáíéóěďýň\n"
-"ěĺ Unix/Linux ăéá íá óőă÷ńďíßćďíôáé ôá logs ęëđ. Ĺáí äĺí ĺßóôĺ ěÝńďň\n"
-"ĺíüň ěĺăÜëďő ăńáöĺßďő ęáé äĺí Ý÷ĺôĺ áęďýóĺé ăéá áőôü, ôüôĺ đéčáíüí \n"
-"íá ěçí éó÷ýĺé áőôü."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Ç Ńýčěéóç ďëďęëçńţčçęĺ. Íá ăńáöôďýí áőôÝň ďé áëëáăÝň óôď äßóęď;\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Áäőíáěßá áíďßăěáôďň %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "ÓöÜëěá ęáôÜ ôď Üíďéăěá ôďő %s ăéá ĺăăńáöŢ: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Ńýčěéóç Firewalling"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Đáńáęáëţ đĺńéěÝíĺôĺ, đńďĺôďéěáóßá ĺăęáôÜóôáóçň"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "ŐđďëďăéóôŢň Äéęôýďő (đĺëÜôçň)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ăńáöĺßď"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Óôáčěüň ĺńăáóßáň Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ĺńăáëĺßá ăéá Palm Pilot Ţ Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Óôáčěüň ĺńăáóßáň"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domain Name ęáé Network Information Server"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr "Ĺńăáëĺßá ăńáöĺßďő: ĹđĺîĺńăáóôÝň ęĺéěÝíďő, ëďăéóôéęÜ öýëëá ęëđ"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ĺńăáëĺßá Ţ÷ďő: mp3 Ţ midi players, ěßęôĺň ęëđ"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Âéâëßá ęáé ďäçăďß ăéá ôď Linux ęáé ôď ĺëĺýčĺńď ëďăéóěéęü"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Óôáčěüň ĺńăáóßáň KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ęëđ"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "ĐďëőěÝóá - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Ĺńăáëĺßá ăéá áëëçëďăńáößá, íÝá, web, ěĺôáöďńÜ áń÷ĺßůí ęáé óőíďěéëßá"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "ÂÜóç ÄĺäďěÝíůí"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL Ţ MySQL database ĺîőđçńĺôçôŢň"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ĺńăáëĺßá ăéá íá äéĺőęďëőíčĺßôĺ óôç ńýčěéóç ôďő őđďëďăéóôŢ óáň"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "ĐďëőěÝóá - š÷ďň"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Ĺńăáëĺßá"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Ôĺęěçńßůóç"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ĺńăáëĺßá ęďíóüëáň"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "ĹîőđçńĺôçôŢň ôá÷őäńďěĺßďő Postfix, ĺîőđçńĺôçôŢň íĺţí Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Óôáčěüň Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Óôáčěüň đďëőěÝóůí"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "Ńýčěéóç LÁÍ"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Đĺńéóóüôĺńá ăńáöéęÜ đĺńéâÜëëďíôá (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "Ôď đĺńéâÜëëďí ăńáöĺßďő KDE ěĺ ěéá óőëëďăŢ óőíďäĺőôéęţí ĺńăáëĺßůí"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ăńáöéęü ĐĺńéâÜëëďí"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ĺńăáëĺßá ăéá äçěéďőńăßá ęáé ĺăăńáöŢ CD"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Óôáčěüň ĺńăáóßáň ăńáöĺßďő"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "ĹîőđçńĺôçôŢň"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, ęëđ"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "ĐńďăńÜěěáôá ăńáöéęţí üđůň ôď Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "ÂéâëéďčŢęĺň áíÜđôőîçň C ęáé C++, đńďăńÜěěáôá ęáé Üëëá áń÷ĺßá"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "ĹîőđçńĺôçôŢň äéęôýďő"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Óôáčěüň đáé÷íéäéţí"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "ĐńďăńÜěěáôá áíáđáńáăůăŢň ęáé äéá÷ĺßńçóçň video"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "ĐďëőěÝóá - ĂńáöéęÜ"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "ÄéáóęÝäáóç (đáé÷íßäéá)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Ĺńăáëĺßá ăéá áđďóôďëŢ ęáé ëŢřç áëëçëďăńáößáň ęáé news (pine, mutt, tin...) "
-"ęáé Web Browsers"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Áń÷ĺéďčÝôçóç, ĺîďěďéůôÝň, đáńáęďëďýčçóç"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Äéá÷ĺßńçóç đńďóůđéęţí ďéęďíďěéęţí äĺäďěÝíůí"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Ăńáöéęü đĺńéâÜëëďí ěĺ öéëéęÜ ĺńăáëĺßá ęáé ĺöáńěďăÝň"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "ĐĺëÜôĺň ăéá äéáöďńĺôéęÜ đńůôüęďëëá óőěđĺńéëáěâáíďěÝíďő ôďő ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Đýëç Éíôĺńíĺô"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "ĐńďăńÜěěáôá áíáđáńáăůăŢň ęáé äéá÷ĺßńçóçň video ęáé Ţ÷ďő"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "śëëá ăńáöéęÜ đĺńéâÜëëďíôá"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "ĹđĺîĺńăáóôÝň ęĺéěÝíďő, ęĺëýöç, ĺńăáëĺßá áń÷ĺßůí, ôĺńěáôéęÜ"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "ĐńďăńÜěěáôá ďéęďíďěéęŢň äéá÷ĺßńçóçň, üđůň ôď gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Äéá÷ĺßńçóç đńďóůđéęţí äĺäďěÝíůí"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "ĐďëőěÝóá - ĹăăńáöŢ CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Óôáčěüň Ĺńăáóßáň Ĺđéóôçěďíéęţí ĺöáńěďăţí"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Áęýńůóç"
-
-#, fuzzy
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Ďëďęëçńţčçęĺ"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "ĹđéëÝîôĺ ôďí ĺî' ďńéóěďý ÷ńŢóôç:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Ěđďńĺßôĺ ôţńá íá äţóĺôĺ đáńáěÝôńďőň ăéá ôďí ďäçăü %s"
-
-#~ msgid "mount failed"
-#~ msgstr "óýíäĺóç áđÝôő÷ĺ"
-
-#~ msgid "Low"
-#~ msgstr "×áěçëü"
-
-#~ msgid "Medium"
-#~ msgstr "ĚÝôńéď"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Ëßăĺň âĺëôéţóĺéň áóöáëĺßáň, ç ęýńéá ĺßíáé üôé őđÜń÷ďőí đĺńéóóüôĺńĺň \n"
-#~ "đńďĺéäďđďéŢóĺéň ęáé Ýëĺă÷ďé."
-
-#~ msgid "Boot mode"
-#~ msgstr "Ëĺéôďőńăßá ĺęęßíçóçň"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Ăéá ĺéäéęďýň"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Ôď GNU/Linux ÷ĺéńßćĺôáé ôçí ţńá óĺ GMT (\"Greenwich Mean Time\" Ţ \n"
-#~ "\"ĚĺóçěâńéíŢ żńá ĂęńŢíďőéôň\") ęáé ôçí ěĺôáôńÝđĺé óĺ ôďđéęŢ ţńá\n"
-#~ "âÜóĺé ôçň ćţíçň ţńáň đďő čá ĺđéëÝîĺôĺ."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Óýíäĺóç óôď äéáäßęôőď (internet)"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Áđďóýíäĺóç áđü ôď äéáäßęôőď (internet)"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Ńýčěéóç óýíäĺóçň óôď äßęôőď (ôďđéęü Ţ Äéáäßęôőď)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Óĺ đďéüí äßóęď čÝëĺôĺ íá ěĺôáęéíçčĺßôĺ;"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôá đáęÝôá đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Đëçńďöďńßĺň"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Óôáčěüň ĺńăáóßáň Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "áőčĺíôéęüôçôá"
-
-#~ msgid "user"
-#~ msgstr "÷ńŢóôçň"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Đáńáęáëţ ĺđéëÝîôĺ ôýđď đďíôéęéďý."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "¸îďäďň"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Áőôüěáôç óýíäĺóç áđďóđţěĺíůí ěďíÜäůí áđďčŢęĺőóçň"
-
-#~ msgid "Active"
-#~ msgstr "Ĺíĺńăü"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "ź÷é"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "¸íáň ĺęôőđůôŢň ôýđďő \"%s\" ĺíôďđßóôçęĺ óôď "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "ÓőóęĺőŢ ôďđéęďý ĺęôőđůôŢ"
-
-#~ msgid "Printer Device"
-#~ msgstr "ÓőóęĺőŢ ĺęôőđůôŢ"
-
-#~ msgid "Device/file name missing!"
-#~ msgstr "Ôď áń÷ĺßď óőóęĺőŢň ëĺßđĺé!"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "ÁđďěĺěáęńőóěÝíďň ĺîőđçńĺôçôŢň CUPS"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "ÁđďěĺěáęńőóěÝíďň ĺîőđçńĺôçôŢň CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "ĘáôÜóôáóç óőóôŢěáôďň"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "śëëď"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Đáńáęáëţ ĺđéëÝîôĺ äéáńýčěéóç đëçęôńďëďăßďő."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Đáńáęáëţ ęÜíôĺ ęëéę óĺ ěéá ęáôÜôěçóç"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Ôýđďň: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "ĘáôĺóôńáěÝíď ĺöĺäńéęü áń÷ĺßď"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Ńýčěéóç ×"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "ÓőóęĺőŢ ĺęôőđůôŢ"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Áęýńůóç"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ďę"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Ęëĺßóéěď"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Ĺęęßíçóç óýíäĺóçň..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Ęëĺßóéěď óýíäĺóçň..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Ç óýíäĺóç äĺí Ýęëĺéóĺ.\n"
-#~ "ĐńďóđáčŢóôĺ íá ôď ęÜíĺôĺ ěüíďň óáň ôńÝ÷ďíôáň\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "ůň root."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Ôď óýóôçěá äĺí ĺßíáé óőíäĺäĺěÝíď óôď Äéáäßęôőď."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "ĹđéëÝîôĺ ôď ěÝăĺčďň đďő čÝëĺôĺ íá ĺăęáôáóôŢóĺôĺ"
-
-#~ msgid "Total size: "
-#~ msgstr "Óőíďëéęü ěÝăĺčďň: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Đáńáęáëţ đĺńéěÝíĺôĺ, "
-
-#~ msgid "Total time "
-#~ msgstr "Óőíďëéęüň ÷ńüíďň "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Íá ÷ńçóéěďđďéŢóů ôéň őđÜń÷ďőóĺň ńőčěßóĺéň ăéá ôá ×11;"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Óĺ đďéÜ óőóęĺőŢ ĺßíáé óőíäĺäĺěÝíďň ď ĺęôőđůôŢň óáň;\n"
-#~ "(óçěĺßůóç: ôď /dev/lp0 áíôéóôďé÷ĺß óôď LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Đńďóď÷Ţ, ď đńďóáńěďăÝáň äéęôýďő ĺßíáé Ţäç ńőčěéóěÝíďň. Čá ôďí "
-#~ "ĺđáíáńőčěßóů."
-
-#~ msgid "New"
-#~ msgstr "ÍÝď"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "źíďěá áđďěĺěáęńőóěÝíçň ďőńÜň"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Đáńáęáëţ ęÜíôĺ ęëéę óĺ ěéá ęáôÜôěçóç"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Áěöéâďëď (%s), đáńáęáëţ đńďóäéďńéóôĺ ęáëýôĺńá\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ; (ĺî' ďńéóěďý %s) "
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "Ç ĺđéëďăŢ óáň; (ĺî' ďńéóěďý %s ĺéóÜăĺôĺ `none' ăéá ęáíÝíá) "
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "áäőíáěßá áíďßăěáôďň ôďő /etc/sysconfig/autologin ăéá áíÜăíůóç: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "ČÝëĺôĺ íá ĺđáíĺęęéíŢóĺôĺ ôď äßęôőď;"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Óőěöůíĺßôĺ;"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Čá ĺđáíĺęęéíŢóů ôçí đáńáęÜôů óőóęĺőŢ äéęôýďő:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Čá ĺđáíĺęęéíŢóů ôçí óőóęĺőŢ äéęôýďő %s. Óőěöůíĺßôĺ;"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Ĺęôüň ęáé áí ĺßóôĺ óßăďőńďé üôé äĺí ĺßíáé Ýôóé, ç óőíçčéóěÝíç ĺđéëďăŢ\n"
-#~ "ĺßíáé \"/dev/hda\" (ď đńţôďň äßóęďň óôď đńţôď ęáíÜëé), Ţ \"/dev/sda\n"
-#~ "(ď đńţôďň SCSI äßóęďň)."
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "ĹđéëÝîôĺ ôďí ĺî' ďńéóěďý ÷ńŢóôç:"
-
-#~ msgid "Spooler: "
-#~ msgstr "Spooler: "
-
-#~ msgid "Test the mouse here."
-#~ msgstr "ÄďęéěÜóôĺ ôď đďíôßęé ĺäţ."
-
-#~ msgid "Press next to continue."
-#~ msgstr "ĐáôŢóôĺ ĺđüěĺíď ăéá íá óőíĺ÷ßóĺôĺ."
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Đáńáęáëţ ĺđéëÝîôĺ ăëţóóá ăéá ĺăęáôÜóôáóç ęáé ÷ńŢóç."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "ĐńÝđĺé íá áđďäĺ÷čĺßôĺ ôďőň üńďőň ôçň Üäĺéáň ÷ńŢóçň đńéí óőíĺ÷ßóĺôĺ ôçí "
-#~ "ĺăęáôÜóôáóç.\n"
-#~ "\n"
-#~ "\n"
-#~ "Đáńáęáëţ ĺđéëÝîôĺ \"Áđďäď÷Ţ\" ĺÜí óőěöůíĺßôĺ ěĺ ôďőň üńďőň.\n"
-#~ "\n"
-#~ "\n"
-#~ "Đáńáęáëţ ĺđéëÝîôĺ \"śńíçóç\" ĺÜí äĺí óőěöůíĺßôĺ. Ç ĺăęáôÜóôáóç čá "
-#~ "óôáěáôŢóĺé ÷ůńßň íá\n"
-#~ "đĺéńá÷ôĺß ôßđďôá."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr ""
-#~ "ĹđéëÝîôĺ ôçí äéáńýčěéóç đďő áíôéóôďé÷ĺß óôď đëçęôńďëüăéü óáňáđü ôçí "
-#~ "đáńáđÜíů ëßóôá"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "ĹÜí čÝëĺôĺ ęáé Üëëĺň ăëţóóĺň (ĺęôüň áđü áőôŢ đďő ĺđéëÝîáôĺ óôçí áń÷Ţ)\n"
-#~ "đáńáęáëţ ĺđéëÝîôĺ ôéň áđü ôďí đáńáđÜíů ęáôÜëďăď."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "ĹđéëÝîôĺ:\n"
-#~ "\n"
-#~ " - ĐńďóáńěďóěÝíç: ĹÜí ĺßóôĺ ĺîďéęĺéůěÝíďň ěĺ ôď Linux, čá ěđďńÝóĺôĺ íá \n"
-#~ "ĺđéëÝîĺôĺ ěĺôáîý óőóôŢěáôďň ăĺíéęŢň ÷ńŢóçň, óőóôŢěáôďň áíÜđôőîçň Ţ "
-#~ "ĺîőđçńĺôçôŢ\n"
-#~ "äéęôýďő.\n"
-#~ "\n"
-#~ "\n"
-#~ " - ĹîĺéäéęĺőěÝíç: ĹÜí ĺßóôĺ đďëý ĺîďéęĺéůěÝíďň ěĺ óőóôŢěáôá GNU/Linux "
-#~ "ęáé\n"
-#~ "čÝëĺôĺ íá đńáăěáôďđďéŢóĺôĺ ěéá ĺîáéńĺôéęÜ đńďóáńěďóěÝíç ĺăęáôÜóôáóç, "
-#~ "ôüôĺ\n"
-#~ "áőôŢ ç ĺđéëďăŢ ĺßíáé ăéá óáň. Čá ěđďńÝóĺôĺ íá ĺđéëÝîĺôĺ ôýđď "
-#~ "ĺăęáôÜóôáóçň\n"
-#~ "üđůň ęáé óôçí đáńáđÜíů (\"ĐńďóáńěďóěÝíç\") ĺđéëďăŢ."
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ " at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ " will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ " or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ " SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ " server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Ďé ĺđéëďăÝň đďő Ý÷ĺôĺ ó÷ĺôéęÜ ěĺ ôçí ÷ńŢóç ôďő óőóôŢěáôüň óáň \n"
-#~ "ĺßíáé ďé áęüëďőčĺň:\n"
-#~ "\n"
-#~ "* Óôáčěüň ĺńăáóßáň: ĹđéëÝîôĺ áőôŢí ĺÜí óęďđĺýĺôĺ íá ÷ńçóéěďđďéçóĺôĺ ôď "
-#~ "óýóôçěÜ\n"
-#~ " óáň ęőńßůň ăéá ęáčçěĺńéíŢ ÷ńŢóç, óôď óđßôé Ţ óôď ăńáöĺßď. \n"
-#~ "\n"
-#~ "* ÁíÜđôőîç: ĹđéëÝîôĺ áőôü ĺÜí óęďđĺýĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ ôď óýóôçěÜ "
-#~ "óáň\n"
-#~ " ęőńßůň ăéá áíÜđôőîç ëďăéóěéęďý. Čá ĺăęáôáóôáčĺß ěéá đëŢńçň óőëëďăŢ "
-#~ "ĺńăáëĺßůí\n"
-#~ " ăéá ěĺôáăëţôéóç, áđďóöáëěÜôůóç ęáé ěďńöďđďßçóç đçăáßďő ęţäéęá, ęáčţň "
-#~ "ęáé\n"
-#~ " äçěéďőńăßá đáęÝôůí ëďăéóěéęďý.\n"
-#~ "\n"
-#~ "* ĹîőđçńĺôçôŢň: ĹđéëÝîôĺ áőôü ĺÜí óęďđĺýĺôĺ íá ÷ńçóéěďđďéŢóĺôĺ ôď óýóôçěÜ "
-#~ "óáň\n"
-#~ " ůň ĺîőđçńĺôçôŢ, ĺßôĺ áń÷ĺßůí (NFS Ţ SMB), ĺßôĺ ĺęôőđţóĺůí (lp Ţ SMB), "
-#~ "ĺßôĺ\n"
-#~ " đéóôďđďßçóçň (NIS), âÜóçň äĺäďěÝíůí ęëđ. Óĺ áőôŢí ôçí đĺńßđôůóç, äĺí "
-#~ "čá\n"
-#~ " ĺăęáôáóôáčďýí đńÜăěáôá üđůň ôď KDE, ôď Gnome ęëđ."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ĺđéëÝîĺôĺ ôéň ďěÜäĺň đáęÝôůí đďő ĺđéčőěĺßôĺ íá "
-#~ "ĺăęáôáóôŢóĺôĺ Ţ íá áíáâáčěßóĺôĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ôď DrakX čá đńďóäéďńßóĺé ĺÜí Ý÷ĺôĺ áńęĺôü ÷ţńď óôďí äßóęď óáň.\n"
-#~ "ĹÜí ü÷é, čá ëÜâĺôĺ ěéá đńďĺéäďđďßçóç. ĹÜí čÝëĺôĺ íá óőíĺ÷ßóĺôĺ, čá "
-#~ "ĺăęáôáóôáčďýí\n"
-#~ "üëĺň ďé ĺđéëĺăěÝíĺň ďěÜäĺň, áëëÜ čá áöáéńĺčďýí ęÜđďéá đáęÝôá ĺëÜóóďíďň "
-#~ "ĺíäéáöÝńďíôďň.\n"
-#~ "Óôď ęÜôů ěÝńďň ôçň ëßóôáň ěđďńĺßôĺ íá ĺđéëÝîĺôĺ \"ĹđéëďăŢ áíĺîÜńôçôůí "
-#~ "đáęÝôůí\". Óĺ áőôŢ\n"
-#~ "ôç đĺńßđôůóç čá đńÝđĺé íá ĺđéëÝîĺôĺ áíÜěĺóá óĺ đáńáđÜíů áđü 1000 đáęÝôá."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ĺđéëÝîĺôĺ áíĺîÜńôçôá üëá ôá đáęÝôá đďő ĺđéčőěĺßôĺ \n"
-#~ "íá ĺăęáôáóôŢóĺôĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ěđďńĺßôĺ íá áíáđôýîĺôĺ Ţ íá óőěđôýîĺôĺ ôď äÝíôńď ĺđéëÝăďíôáň ôéň "
-#~ "ĺđéëďăÝň\n"
-#~ "óôçí áńéóôĺńŢ ăůíßá ôďő đáńáčýńďő ôůí đáęÝôůí.\n"
-#~ "\n"
-#~ "\n"
-#~ "ĹÜí đńďôéěÜôĺ íá íá âëÝđĺôĺ ôá đáęÝôá ôáîéíďěçěÝíá áëöáâçôéęÜ, đáôŢóôĺ\n"
-#~ "\"ĹíáëëáăŢ ďěáäďđďßçóçň\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ĹÜí äĺí čÝëĺôĺ íá ëáěâÜíĺôĺ đńďĺéäďđďéŢóĺéň ăéá ĺîáńôŢóĺéň, đáôŢóôĺ\n"
-#~ "\"Áőôüěáôĺň ĺîáńôŢóĺéň\". Óçěĺéţóôĺ üôé óĺ áőôŢí ôçí đĺńßđôůóç, ç \n"
-#~ "áđďĺđéëďăŢ ĺíüň đáęÝôďő ěđďńĺß íá đńďęáëÝóĺé ôçí óéůđçëŢ áđďĺđéëďăŢ \n"
-#~ "ęáé Üëëůí đáęÝôůí đďő ĺîáńôţíôáé áđü áőôü."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "ĹÜí Ý÷ĺôĺ üëá ôá đáńáđÜíů CDs, đáôŢóôĺ Ok.\n"
-#~ "ĹÜí äĺí Ý÷ĺôĺ ęáíÝíá áđü ôá đáńáđÜíů CDs, đáôŢóôĺ Áęýńůóç.\n"
-#~ "ĹÜí äĺí Ý÷ĺôĺ ęÜđďéá áđü áőôÜ, áđďĺđéëÝîôĺ ôá ęáé đáôŢóôĺ Ok."
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are installing on an Apple machine with a 1-button mouse, you "
-#~ "will\n"
-#~ "be given the opportunity to define some keyboard keys to emulate the 2nd\n"
-#~ "and 3rd mouse buttons. This will allow you to be able to access the "
-#~ "full\n"
-#~ "functionality of the mouse in both the Linux console and the X Window "
-#~ "GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have an ADB mouse, please select USB, as the Linux kernel will "
-#~ "take\n"
-#~ "care of mapping your mouse hardware correctly."
-#~ msgstr ""
-#~ "Ôţńá ěđďńĺßôĺ íá äďęéěÜóĺôĺ ôď đďíôßęé óáň. ×ńçóéěďđďéŢóôĺ ôá ęďőěđéÜ ęáé "
-#~ "ôç ńďäÝëá ăéá íá\n"
-#~ "ĺđéâĺâáéţóĺôĺ đůň ďé ńőčěßóĺéň ĺßíáé óůóôÝň. Áí äĺí ĺßíáé, ěđďńĺßôĺ íá "
-#~ "ęÜíĺôĺ ęëßę óôď \"śęőńď\"\n"
-#~ "ăéá íá ĺđéëÝîĺôĺ Ýíáí Üëëď ďäçăü.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ĺáí ęÜíĺôĺ ĺăęáôÜóôáóç óĺ Ýíá ěç÷Üíçěá Apple ěĺ đďíôßęé ĺíüň ęďőěđéďý, čá "
-#~ "óáň äďčĺß ç\n"
-#~ "ĺőęáéńĺßá íá ďńßóĺôĺ ęÜđďéá ęďőěđéÜ ôďő đëçęôńďëďăßďő ţóôĺ íá ĺîďěďéţóĺôĺ "
-#~ "ôď 2ď ęáé ôď 3ď\n"
-#~ "ęďőěđß ôďő đďíôéęéďý. Áőôü čá óáň ĺđéôńÝřĺé íá Ý÷ĺôĺ đńüóâáóç óôçí đëŢńç "
-#~ "ëĺéôďőńăéęüôçôá\n"
-#~ "ôďő đďíôéęéďý ôüóď óôçí ęďíóüëá ôďő Linux üóď ęáé óôď X Window GUI.\n"
-#~ "\n"
-#~ "\n"
-#~ "Áí Ý÷ĺôĺ Ýíá ADB đďíôßęé, đáńáęáëţ ĺđéëÝîôĺ USB, ęáčţň ď đőńŢíáň ôďő "
-#~ "Linux čá öńďíôßóĺé\n"
-#~ "ăéá ôď đďíôßęé óáň ęáôÜëëçëá."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "ĹÜí čÝëĺôĺ íá óőíäÝóĺôĺ ôďí őđďëďăéóôŢ óáň óôď Äéáäßęôőď Ţ óĺ Ýíá "
-#~ "ôďđéęü \n"
-#~ "äßęôőď, đáńáęáëţ ęÜíôĺ ôçí ęáôÜëëçëç ĺđéëďăŢ, áöďý áíďßîĺôĺ ôçí äéęôőáęŢ "
-#~ "óáň \n"
-#~ "óőóęĺőŢ ţóôĺ ôď DrakX íá ôçí ĺíôďđßóĺé áőôüěáôá.\n"
-#~ "\n"
-#~ "\n"
-#~ "ĹÜí äĺí Ý÷ĺôĺ ęáěßá äéęôőáęŢ óýíäĺóç, ĺđéëÝîôĺ \"Áđĺíĺńăďđďßçóç äéęôýďő"
-#~ "\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ĹÜí čÝëĺôĺ íá ńőčěßóĺôĺ ôď äßęôőď áńăüôĺńá, Ţ áí ôĺëĺéţóáôĺ ěĺ ôéň \n"
-#~ "ńőčěßóĺéň äéęôýďő, ĺđéëÝîôĺ \"ÔÝëďň\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Äĺí ĺíôďđßóôçęĺ modem. Đáńáęáëţ ĺđéëÝîôĺ ôçí óĺéńéáęŢ čýńá óôçí ďđďßá\n"
-#~ "ĺßíáé óőíäĺäĺěÝíď.\n"
-#~ "\n"
-#~ "\n"
-#~ "ĐëçńďöďńéáęÜ, ç đńţôç čýńá (đďő ďíďěÜćĺôáé \"COM1\" óôá Microsoft "
-#~ "Windows),\n"
-#~ "óôď Linux ďíďěÜćĺôáé \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ĺđéëÝîĺôĺ ôéň ńőčěßóĺéň dial-up. ĹÜí äĺí îÝńĺôĺ Ţ äĺí "
-#~ "ĺßóôĺ\n"
-#~ "óßăďőńďň ăéá áőôÝň ôéň ńőčěßóĺéň, ěđďńĺßôĺ íá ôéň đëçńďöďńçčĺßôĺ áđü "
-#~ "ôďí \n"
-#~ "đáńď÷Ýá óáň. ĹÜí äĺí ďńßóĺôĺ ĺîőđçńĺôçôŢ ďíďěÜôůí (DNS), čá ďńéóôĺß "
-#~ "áőôüěáôá \n"
-#~ "ęáôÜ ôçí óýíäĺóç."
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "ĹÜí ôď modem óáň ĺßíáé ĺîůôĺńéęü, đáńáęáëţ áíďßîôĺ ôď ţóôĺ ôď DrakX íá "
-#~ "ěđďńÝóĺé íá ôď ĺíôďđßóĺé áőôüěáôá."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Đáńáęáëţ áíďßîôĺ ôď modem óáň ęáé ĺđéëÝîôĺ ôď óůóôü."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ĺđéëÝîĺôĺ ôéň ńőčěßóĺéň dial-up. ĹÜí äĺí îÝńĺôĺ Ţ äĺí "
-#~ "ĺßóôĺ\n"
-#~ "óßăďőńďň ăéá áőôÝň ôéň ńőčěßóĺéň, ěđďńĺßôĺ íá ôéň đëçńďöďńçčĺßôĺ áđü "
-#~ "ôďí \n"
-#~ "đáńď÷Ýá óáň. ĹÜí äĺí ďńßóĺôĺ ĺîőđçńĺôçôŢ ďíďěÜôůí (DNS), čá ďńéóôĺß "
-#~ "áőôüěáôá \n"
-#~ "ęáôÜ ôçí óýíäĺóç."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ĺéóÜăĺôĺ ôď äéęôőáęü üíďěá (ĺÜí ÷ńĺéÜćĺôáé). ĹÜí äĺí "
-#~ "ĺßóôĺ óßăďőńďň,\n"
-#~ "ěđďńĺßôĺ íá ćçôŢóĺôĺ đëçńďöďńßĺň áđü ôďí đáńď÷Ýá óáň."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ " * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ " You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ " ask your network administrator.\n"
-#~ "\n"
-#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ " \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ńőčěßóĺôĺ ôçí óőóęĺőŢ äéęôýďő.\n"
-#~ "\n"
-#~ " - Äéĺýčőíóç IP: ĹÜí äĺí ôçí îÝńĺôĺ, ńůôŢóôĺ ôďí őđĺýčőíď äéęôýďő Ţ\n"
-#~ "ôďí đáńď÷Ýá óáň.\n"
-#~ "Äĺí đńÝđĺé íá ĺéóÜăĺôĺ äéĺýčőíóç IP ĺÜí ĺđéëÝîĺôĺ \"Áőôüěáôç áđüäďóç IP"
-#~ "\"\n"
-#~ "đáńáęÜôů.\n"
-#~ "\n"
-#~ "\n"
-#~ " - ĚÜóęá äéęôýďő: \"255.255.255.0\" ĺßíáé óőíŢčůň ęáëŢ ĺđéëďăŢ. ĹÜí äĺí\n"
-#~ "ĺßóôĺ óßăďőńďň, ńůôŢóôĺ ôďí őđĺýčőíď äéęôýďő Ţ ôďí đáńď÷Ýá óáň.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Áőôüěáôç áđüäďóç IP: ĹÜí ôď äßęôőü óáň ÷ńçóéěďđďéĺß Ýíá áđü ôá "
-#~ "đńďôüęďëëá\n"
-#~ "BOOTP Ţ DHCP, ĺđéëÝîôĺ áőôü. Óĺ áőôŢ ôçí đĺńßđôůóç, äĺí ÷ńĺéÜćĺôáé íá "
-#~ "äţóĺôĺ\n"
-#~ "äéĺýčőíóç IP. ĹÜí äĺí ĺßóôĺ óßăďőńďň, ńůôŢóôĺ ôďí őđĺýčőíď äéęôýďő Ţ\n"
-#~ "ôďí đáńď÷Ýá óáň."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ĺéóÜăĺôĺ ôď äéęôőáęü óáň üíďěá. ĹÜí äĺí\n"
-#~ "ĺßóôĺ óßăďőńďé, óőěâďőëĺőčĺßôĺ ôďí őđĺýčőíď äéęôýďő."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ĺéóÜăĺôĺ ôď äéęôőáęü óáň üíďěá. ĹÜí äĺí\n"
-#~ "ĺßóôĺ óßăďőńďé, áöŢóôĺ ôď ęĺíü."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ĺéóÜăĺôĺ ôéň ĺđéëďăÝň ôďő dialup. ĹÜí äĺí ĺßóôĺ "
-#~ "óßăďőńďň,\n"
-#~ "ěđďńĺßôĺ íá ćçôŢóĺôĺ đëçńďöďńßĺň áđü ôďí đáńď÷Ýá óáň."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "ĹÜí ÷ńçóéěďđďéŢóĺôĺ proxies, đáńáęáëţ ńőčěßóôĺ ôďőň ôţńá. ĹÜí äĺí "
-#~ "îÝńĺôĺ,\n"
-#~ "ńůôŢóôĺ ôďí đáńď÷Ýá óáň Ţ ôďí őđĺýčőíď äéęôýďő."
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Áí ç óýíäĺóŢ óáň ěĺ ôď Äéáäßęôőď ĺßíáé óůóôÜ ńőčěéóěÝíç, ěđďńĺßôĺ íá\n"
-#~ "ĺăęáôáóôŢóĺôĺ đáęÝôď ęńőđôďăńáößáň. Đńţôá ĺđéëÝîôĺ Ýíáí ôüđď áđ'\n"
-#~ "üđďő čá ęáôĺâÜóĺôĺ ôá đáęÝôá ęáé ěĺôÜ ĺđéëÝîôĺ đďéÜ đáęÝôá čá\n"
-#~ "ĺăęáôáóôŢóĺôĺ.\n"
-#~ "\n"
-#~ "Óçěĺéţóôĺ üôé đńÝđĺé íá ĺđéëÝîĺôĺ ôüđď ęáé đáęÝôá óýěöůíá ěĺ ôçí\n"
-#~ "íďěďčĺóßá óáň."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Ěđďńĺßôĺ ôţńá íá ĺđéëÝîĺôĺ ćţíç ţńáň áíÜëďăá ěĺ ôçí ôďđďčĺóßá óáň."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ íá ďńßóĺôĺ Ýíáí ôďđéęü ĺęôőđůôŢ (óőíäĺäĺěÝíď óôďí őđďëďăéóôŢ "
-#~ "óáň) \n"
-#~ "Ţ Ýíáí áđďěĺěáęńőóěÝíď (đńďóâÜóéěď ěÝóů UNIX äéęôýďő, Netware Ţ äéęôýďő \n"
-#~ "Microsoft Windows)."
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "ĹÜí čÝëĺôĺ íá ĺęôőđţíĺôĺ, ĺđéëÝîôĺ Ýíá óđü ôá äýď óőóôŢěáôá ĺęôýđůóçň \n"
-#~ "(CUPS ęáé LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ôď CUPS ĺßíáé Ýíá íÝď, äőíáôü ęáé ĺőÝëéęôď óýóôçěá ĺęôýđůóçň ăéá UNIX \n"
-#~ "óőóôŢěáôá. ÁőôŢ ĺßíáé ç âáóéęŢ ĺđéëďăŢ ăéá ôď Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ôď LPR ĺßíáé ôď đáëéü ęëáóóéęü óýóôçěá ĺęôýđůóçň.\n"
-#~ "\n"
-#~ "ĹÜí äĺí Ý÷ĺôĺ óęôőđůôŢ, ĺđéëÝîôĺ \"ĘáíÝíá\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "Ôď GNU/Linux ěđďńĺß íá óőíĺńăáóôĺß ěĺ äéÜöďńďőň ôýđďőň ĺęôőđůôţí. Ď "
-#~ "ęáčÝíáň áđü\n"
-#~ "áőôďýň ÷ńĺéÜćĺôáé äéáöďńĺôéęÝň ńőčěßóĺéň.\n"
-#~ "\n"
-#~ "ĹÜí ď ĺęôőđůôŢň óáň ĺßíáé óőíäĺäĺěÝíďň óôď óýóôçěÜ óáň, ĺđéëÝîôĺ "
-#~ "\"Ôďđéęüň\n"
-#~ "ĹęôőđůôŢň\".\n"
-#~ "\n"
-#~ "ĹÜí čÝëĺôĺ íá ĺęôőđţíĺôĺ óĺ Ýíáí ĺęôőđůôŢ ôďđďčĺôçěÝíď óĺ áđďěĺěáęńőóěÝíď "
-#~ "UNIX\n"
-#~ "óýóôçěá, ĺđéëÝîôĺ \"ÁđďěĺěáęńőóěÝíďň ĺęôőđůôŢň\".\n"
-#~ "\n"
-#~ "\n"
-#~ "ĹÜí čÝëĺôĺ íá ĺęôőđţíĺôĺ óĺ Ýíáí ĺęôőđůôŢ ôďđďčĺôçěÝíď óĺ áđďěĺěáęńőóěÝíď "
-#~ "Windows\n"
-#~ "óýóôçěá (Ţ UNIX ěĺ SMB đńůôüęďëëď), ĺđéëÝîôĺ \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ " other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Location: if you want to put some information on your\n"
-#~ " printer location, put it here (you are free to write what\n"
-#~ " you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Đáńáęáëţ áíÜřôĺ ôďí ĺęôőđůôŢ óáň ăéá íá ôď áíé÷íĺýóĺé ôď DrakX.\n"
-#~ "\n"
-#~ "ĐńÝđĺé íá ĺéóÜăĺôĺ ęÜđďéĺň đëçńďöďńßĺň ĺäţ.\n"
-#~ "\n"
-#~ "\n"
-#~ "...* źíďěá ĺęôőđůôŢ: ď print spooler ÷ńçóéěďđďéĺß ôď \"lp\"ůň ôď "
-#~ "đńďęáčďńéóěÝíď üíďěá. Ďđüôĺ, đńÝđĺé íá Ý÷ĺôĺ Ýíáí ĺęôőđůôŢ ďíüěáôé \"lp"
-#~ "\".\n"
-#~ " Ĺáí Ý÷ĺôĺ ěüíď Ýíáí ĺęôőđůôŢ, ěđďńĺßôĺ íá ÷ńçóéěďđďéŢôĺ đďëëÜ "
-#~ "ďíüěáôá ăéá áőôüí.Áđëţň čá đńÝđĺé íá ôá äéá÷ůńßóĺôĺ ěĺ Ýíá pipe\n"
-#~ " ÷áńáęôŢńá (Ýíá \"|\"). Ďđüôĺ, ĺáí đńďôéěÜôĺ Ýíá đďéď óçěáíôéęü "
-#~ "üíďěá, đńÝđĺé íá ôď âÜëĺôĺ đńţôď, đ.÷: \"My printer|lp\".\n"
-#~ " Ď ĺęôőđůôŢň đďő Ý÷ĺé ôď \"lp\" óôá ďíüěáôÜ ôďő čá ĺßíáé ď "
-#~ "đńďęáčďńéóěÝíďň ĺęôőđůôŢň.\n"
-#~ "\n"
-#~ "\n"
-#~ "...* ĐĺńéăńáöŢ: áőôü ĺßíáé đńďáéńĺôéęü áëëÜ ěđďńĺß íá ĺßíáé ÷ńŢóéěď ĺáí "
-#~ "đďëëďß ĺęôőđůôÝň ĺßíáé óőíäĺäĺěÝíďé óôďí őđďëďăéóôŢ óáň Ţ áí ĺđéôńÝđĺôĺ\n"
-#~ " Üëëďőň őđďëďăéóôÝň íá Ý÷ďőí đńüóâáóç óĺ áőôüí ôďí ĺęôőđůôŢ.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Ôďđďčĺóßá: ĺáí čÝëĺôĺ íá äţóĺôĺ ęÜđďéĺň đëçńďöďńßĺň ó÷ĺôéęÜ ěĺ ôçí\n"
-#~ " ôďđďčĺóßá ôďő ĺęôőđůôŢ óáň, âÜëôĺ ôéň ĺäţ (ĺßóôĺ ĺëĺýčĺńďň íá "
-#~ "ăńÜřĺôĺ üôé\n"
-#~ " čÝëĺôĺ, ăéá đáńÜäĺéăěá \"2ďň üńďöďň\").\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ " \n"
-#~ " * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ " if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ " If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ " protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "ĐńÝđĺé íá ĺéóÜăĺôĺ ęÜđďéĺň đëçńďöďńßĺň ĺäţ.\n"
-#~ "\n"
-#~ "\n"
-#~ " * źíďěá ďőńÜň: ď print spooler ÷ńçóéěďđďéĺß ôď \"lp\" ůň ôď "
-#~ "đńďęáčďńéóěÝíď üíďěá ĺęôőđůôŢ. Ďđüôĺ, đńÝđĺé íá Ý÷ĺôĺ Ýíáí ĺęôőđůôŢ ěĺ ôď "
-#~ "üíďěá \"lp\".\n"
-#~ " Ĺáí Ý÷ĺôĺ ěüíď Ýíáí ĺęôőđůôŢ, ěđďńĺßôĺ íá ÷ńçóéěďđďéŢóĺôĺ đďëëÜ "
-#~ "ďíüěáôá ăéá áőôüí. ÁđëÜ đńÝđĺé íá ôá ÷ůńßóĺôĺ ěĺ Ýíá pipe\n"
-#~ " ÷áńáęôŢńá (Ýíá \"|\"). Ďđüôĺ, ĺáí đńďôéěÜôĺ íá Ý÷ĺôĺ Ýíá đéď "
-#~ "óçěáíôéęü üíďěá, đńÝđĺé íá ôď âÜëĺôĺ đńţôď, đ.÷: \"My printer|lp\".\n"
-#~ " Ď ĺęôőđůôŢň ěĺ ôď \"lp\" óôá ďíüěáôÜ ôďő čá ĺßíáé ď đńďęáčďńéóěÝíďň "
-#~ "ĺęôőđůôŢň.\n"
-#~ "\n"
-#~ " \n"
-#~ " * ĘáôÜëďăďň Spool: áőôüň ĺßíáé ď ęáôÜëďăďň đďő áđďčçęĺýďíôáé ďé "
-#~ "ĺńăáóßĺň ôďő ĺęôőđůôŢ. ÄéáôçńŢóôĺ ôçí ĺî' ďńéóěďý ĺđéëďăŢ\n"
-#~ " ĺáí äĺí îÝńĺôĺ ôß íá ÷ńçóéěďđďéŢóĺôĺ\n"
-#~ "\n"
-#~ "\n"
-#~ " * Óýíäĺóç ĹęôőđůôŢ: Ĺáí ď ĺęôőđůôŢň óáň ĺßíáé öőóéęţň óőíäĺäĺěÝíďň "
-#~ "óôďí őđďëďăéóôŢ óáň, ĺđéëÝîôĺ \"Ôďđéęüň ĺęôőđůôŢň\".\n"
-#~ " Ĺáí čÝëĺôĺ íá Ý÷ĺôĺ đńüóâáóç óĺ Ýíáí ĺęôőđůôŢ đďő âńßóęĺôáé óĺ Ýíá "
-#~ "áđďěáęńőóěÝíď Unix ěç÷Üíçěá, ĺđéëÝîôĺ \"ÁđďěáęńőóěÝíďň lpd ĺęôőđůôŢň\".\n"
-#~ "\n"
-#~ "\n"
-#~ " Ĺáí čÝëĺôĺ íá Ý÷ĺôĺ đńüóâáóç óĺ Ýíáí ĺęôőđůôŢ đďő âńßóęĺôáé óĺ Ýíá "
-#~ "áđďěáęńőóěÝíď Microsoft Windows ěç÷Üíçěá (Ţ óĺ Ýíá Unix ěç÷Üíçěá ěĺ SMB\n"
-#~ " đńůôüęďëëď), ĺđéëÝîôĺ \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " Ĺáí čÝëĺôĺ íá Ý÷ĺôĺ đńüóâáóç óĺ Ýíáí ĺęôőđůôŢ đďő âńßóęĺôáé óĺ Ýíá "
-#~ "NetWare äßęôőď, ĺđéëÝîôĺ \"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Äĺí ĺíôďđßóôçęĺ ĺęôőđůôŢň. Đáńáęáëţ ĺéóÜăĺôĺ ôď üíďěá ôçň óőóęĺőŢň óôçí\n"
-#~ " ďđďßá ĺßíáé óőíäĺäĺěÝíďň.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ďé đĺńéóóüôĺńďé ĺęôőđůôÝň óőíäÝďíôáé óôçí đńţôç đáńÜëëçëç čýńá. ÁőôŢ "
-#~ "ďíďěÜćĺôáé\n"
-#~ "\"/dev/lp0\" óôď GNU/Linux ęáé \"LPT1\" óôá Microsoft Windows."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "ĹđéëÝîôĺ ôďí ĺęôőđůôŢ óáň óôďí đáńáđÜíů ęáôÜëďăď"
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Đáńáęáëţ ĺđéëÝîôĺ ôéň ęáôÜëëçëĺň ńőčěßóĺéň ăéá ôďí ĺęôőđůôŢ óáň.\n"
-#~ "ĘďéôÜîôĺ ôçí ôĺęěçńßůóç ôďő ĺęôőđůôŢ ĺÜí äĺí îÝńĺôĺ ôé íá ĺđéëÝîĺôĺ.\n"
-#~ "\n"
-#~ "\n"
-#~ "¸÷ĺôĺ ôçí äőíáôüôçôá íá ĺëÝăîĺôĺ ôéň ĺđéëďăÝň óáň óôď ĺđüěĺíď âŢěá ęáé "
-#~ "íáôéň ôńďđďđďéŢóĺôĺ áí äĺí ëĺéôďőńăďýí üđůň čá čÝëáôĺ."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá ďńßóĺôĺ ôç ëÝîç-ęëĺéäß ăéá ôďí ÷ńŢóôç \"root\".\n"
-#~ "Ç ëÝîç đńÝđĺé íá ĺéóá÷čĺß ĺéň äéđëďýí ăéá ĺđéâĺâáßůóç.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ď root ĺßíáé ď äéá÷ĺéńéóôŢň ôďő óőóôŢěáôďň ęáé ď ěüíďň đďő Ý÷ĺé \n"
-#~ "ôď äéęáßůěá íá áëëÜîĺé ôéň ńőčěßóĺéň ôďő óőóôŢěáôďň. Ăé áőôü, \n"
-#~ "ĺđéëÝîôĺ đńďóĺęôéęÜ áőôŢ ôç ëÝîç ęëĺéäß! Ěç ĺîďőóéďäďôçěÝíç \n"
-#~ "đńüóâáóç óôď root ěđďńĺß íá ĺßíáéĺîáéńĺôéęÜ ĺđéęßíäőíç ăéá \n"
-#~ "ôçí áęĺńáéüôçôá ôďő óőóôŢěáôďň ęáé ôůí äĺäďěÝíůí ôďő, ęáčţň \n"
-#~ "ęáé ăéá Üëëá óőóôŢěáôá óőíäĺäĺěÝíá óĺ áőôü. \n"
-#~ "\n"
-#~ "\n"
-#~ "Ç ëÝîç ęëĺéäß đńÝđĺé íá ĺßíáé ěéá ěßîç áëöáńéčěçôéęţí ÷áńáęôŢńůí \n"
-#~ "ęáé ěĺ ěŢęďň ôďőëÜ÷éóôďí ďęôţ (8) ÷áńáęôŢńůí. Äĺí đńÝđĺé *đďôÝ* \n"
-#~ "íá ôď ăńÜřĺôĺ óĺ ÷áńôß."
-
-#~ msgid ""
-#~ "If your network uses the LDAP (or NIS) protocol for authentication, "
-#~ "select\n"
-#~ "\"LDAP\" (or \"NIS\") as authentication. If you don't know, ask your "
-#~ "network\n"
-#~ "administrator.\n"
-#~ "\n"
-#~ "If your computer is not connected to any administrated network, you may "
-#~ "want to\n"
-#~ "choose \"Local files\" for authentication."
-#~ msgstr ""
-#~ "Áí ôď äßęôőü óáň őđďóôçńßćĺé LDAP (Ţ NIS) đńůôüęďëëď ăéá ĺîáęńßâůóç, "
-#~ "ĺđéëÝîôĺ\n"
-#~ "\"LDAP\" (Ţ \"NIS\") ůň ĺîáęńßâůóç. Áí äĺí ăíůńßćĺôĺ, ńůôŢóôĺ ôďí "
-#~ "äéá÷ĺéńéóôŢ\n"
-#~ "äéęôýďő óáň.\n"
-#~ "Áí ď őđďëďăéóôŢň óáň äĺí ĺßíáé óőíäĺäĺěÝíďň óĺ äßęôőď ěĺ äéá÷ĺéńéóôŢ, "
-#~ "ôüôĺ đéčáíüôáôá íá čÝëĺôĺ íá\n"
-#~ "ĺđéëÝîĺôĺ \"ÔďđéęÜ áń÷ĺßá\" ăéá ĺîáęńßâůóç."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá äçěéďőńăŢóĺôĺ Ýíáí Ţ đĺńéóóüôĺńďőň \"áđëďýň\" ÷ńŢóôĺň,\n"
-#~ "(óĺ áíôßčĺóç ěĺ ôďí \"ĺîďőóéďäďôçěÝíď\" ÷ńŢóôç, root). Ěđďńĺßôĺ íá \n"
-#~ "äçěéďőńăŢóĺôĺ Ýíáí Ţ đĺńéóóüôĺńďőň ÷ńŢóôĺň ăéá ęÜčĺ đńüóůđď đďő čÝëĺôĺ\n"
-#~ "íá Ý÷ĺé đńüóâáóç óôď óýóôçěÜ óáň. Óçěĺéţóôĺ üôé ęÜčĺ ÷ńŢóôçň Ý÷ĺé ôéň\n"
-#~ "äéęÝň ôďő ńőčěßóĺéň (ăńáöéęü đĺńéâÜëëďí, ńőčěßóĺéň ĺöáńěďăţí ęëđ),\n"
-#~ "ęáčţň ęáé ôď äéęü ôďő \"home directory\", óôď ďđďßď áđďčçęĺýďíôáé\n"
-#~ "áőôÝň ďé ńőčěßóĺéň.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ęáô' áń÷Ţí, äçěéďőńăŢóôĺ Ýíáí ÷ńŢóôç ăéá ôďí ĺáőôü óáň! Áęüěá ęáé ĺÜí\n"
-#~ "ĺßóôĺ ď ěďíáäéęüň ÷ńçóôçň ôďő óőóôŢěáôďň, ÄĹÍ đńÝđĺé íá ÷ńçóéěďđďéĺßôĺ\n"
-#~ "ôď root ăéá ôçí ęáčçěĺńéíŢ ÷ńŢóç ôďő óőóôŢěáôďň, äéüôé áőôü čá \n"
-#~ "äçěéďőńăďýóĺ ęéíäőíďőň. ¸íá áđëü ëÜčďň đëçęôńďëüăçóçň ĺßíáé áńęĺôü\n"
-#~ "ăéá íá ęáôáóôńÝřĺé ôçí ĺăęáôÜóôáóŢ óáň üôáí ĺńăÜćĺóôĺ ůň root.\n"
-#~ "\n"
-#~ "\n"
-#~ "Ăé áőôü, čá đńÝđĺé íá óőíäÝĺóôĺ óôď óýóôçěÜ óáň ÷ńçóéěďđďéţíôáň Ýíáí\n"
-#~ "ęůäéęü áđëďý ÷ńŢóôç ęáé íá óőíäÝĺóôĺ ůň root ěüíď ăéá ĺńăáóßĺň äéďßęçóçň\n"
-#~ "ęáé óőíôŢńçóçň ôďő óőóôŢěáôďň."
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Óőíßóôáôáé íá äçěéďőńăŢóĺôĺ Ýíáí äßóęď ĺęęßíçóçň. ĹÜí äĺí \n"
-#~ "ěđďńĺßôĺ íá ĺęęéíŢóĺôĺ ôďí őđďëďăéóôŢ óáň, ĺßíáé ď ěüíďň ôńüđďň \n"
-#~ "íá äéáóţóĺôĺ ôď óýóôçěÜ óáň ÷ůńßň ĺđáíĺăęáôÜóôáóç."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "Ďé ęýńéĺň ĺđéëďăÝň ôďő LILO ęáé ôďő grub ĺßíáé:\n"
-#~ " - ÓőóęĺőŢ ĺęęßíçóçň: Ďńßćĺé ôď üíďěá ôçň óőóęĺőŢň (đ.÷. ěéá \n"
-#~ "ęáôÜôěçóç) đďő đĺńéÝ÷ĺé ôďí ôďěÝá ĺęęßíçóçň. Ĺęôüň ęáé áí ĺßóôĺ\n"
-#~ "óßăďőńďé üôé ĺßíáé áëëéţň, ĺđéëÝîôĺ \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - ĘáčőóôÝńçóç đńéí ôçí ĺęęßíçóç: Ďńßćĺé ôá äÝęáôá ôďő äĺőôĺńďëÝđôďő\n"
-#~ "đďő ôď óýóôçěá čá đĺńéěÝíĺé đńéí ĺęęéíŢóĺé ôď đńţôď ëĺéôďőńăéęü.\n"
-#~ "Áőôü ĺßíáé óőíŢčůň ÷ńŢóéěď óĺ óőóôŢěáôá đďő ĺęęéíďýí áđü ôďí äßóęď\n"
-#~ "áěÝóůň ěĺôÜ ôçí ĺíĺńăďđďßçóç ôďő đëçęôńďëďăßďő. Äĺí őđÜń÷ĺé ęáčőóôÝńçóç\n"
-#~ "ĺÜí ď áńéčěüň đáńáëĺéöčĺß Ţ ĺßíáé ěçäÝí.\n"
-#~ "\n"
-#~ "\n"
-#~ " - ÁíÜëőóç ďčüíçň: Áőôü ďńßćĺé ôçí VGA áíÜëőóç ęĺéěÝíďő đďő čá ĺđéëĺăĺß\n"
-#~ "ęáôÜ ôçí ĺęęßíçóç. ŐđÜń÷ďőí ďé đáńáęÜôů ĺđéëďăÝň: \n"
-#~ "\n"
-#~ " * normal: ĘáíďíéęŢ áíÜëőóç ęĺéěÝíďő 80×25.\n"
-#~ "\n"
-#~ " * <áńéčěüň>: ÷ńŢóç ôçň áíôßóôďé÷çň áíÜëőóçň ęĺéěÝíďő.\n"
-#~ "\n"
-#~ " - Ęáčáńéóěüň \"/tmp\" óĺ ęÜčĺ ĺęęßíçóç: ĺáí čÝëĺôĺ íá óâŢíĺôĺ üëá ôá "
-#~ "áń÷ĺßá ęáé ôďő öáęÝëďőň\n"
-#~ "đďő ĺßíáé óôď \"/tmp\" üôáí îĺęéíÜôĺ ôď óýóôçěÜ óáň, ĺíĺńăďđďéŢóôĺ áőôŢí "
-#~ "ôçí ĺđéëďăŢ.\n"
-#~ "\n"
-#~ "\n"
-#~ " - ÁęńéâŢň RAM áí ÷ńĺéÜćĺôáé: äőóôő÷ţň, äĺí őđÜń÷ĺé óôĺńĺüôőđç ěÝčďäďň "
-#~ "íá äţóĺé ôď\n"
-#~ "BIOS ôďí áęńéâŢ áńéčěü RAM ôďő őđďëďăéóôŢ óáň. Óáí óőíÝđĺéá, ôď Linux "
-#~ "ßóůň\n"
-#~ "áđďôý÷ĺé íá áíé÷íĺýóĺé ôçí RAM óůóôÜ. Óĺ áőôŢí ôçí đĺńßđôůóç, ěđďńĺßôĺ\n"
-#~ "íá ďńßóĺôĺ ôďí óůóôü áńéčěü ĺäţ. Đáńáęáëţ óçěĺéţóôĺ đůň ěéá äéáöďńÜ ôçň "
-#~ "ôÜîçň ôůí 2 Ţ 4\n"
-#~ "MB ěĺôáîý ôçň ěíŢěçň đďő áíé÷íĺýôçęĺ ęáé ôçň đńáăěáôéęŢň RAM ôďő "
-#~ "óőóôŢěáôüň óáň ĺßíáé ęáíďíéęŢ."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "Ôď SILO ĺßíáé đńüăńáěěá ĺęęßíçóçň ăéá SPARC: Ěđďńĺß íá ĺęęéíŢóĺé \n"
-#~ "ôď GNU/Linux Ţ ďđďéďäŢđďôĺ Üëëď ëĺéôďőńăéęü őđÜń÷ĺé óôď óýóôçěÜ óáň. "
-#~ "ĘáíďíéęÜ, \n"
-#~ "ôá ĺđéđëÝďí ëĺéôďőńăéęÜ đńďóäéďńßćďíôáé ęáé ńőčěßćďíôáé óůóôÜ. ĹÜí áőôü "
-#~ "äĺí \n"
-#~ "óőíÝâç, ěđďńĺßôĺ íá đńďóčÝóĺôĺ ĺđéđëÝďí ĺđéëďăÝň óĺ áőôŢí ôçí ďčüíç. \n"
-#~ "ĐńďóÝîôĺ íá ĺđéëÝîĺôĺ ôéň óůóôÝň đáńáěÝôńďőň.\n"
-#~ "\n"
-#~ "Ěđďńĺßôĺ ĺđßóçň íá áđďęëĺßóĺôĺ ôçí đńüóâáóç óĺ Üëëá ëĺéôďőńăéęÜ óőóôŢěáôá "
-#~ "áöáéńţíôáň\n"
-#~ "ôéň áíôßóôďé÷ĺň ĺđéëďăÝň. Óĺ áőôŢí üěůň ôçí đĺńßđôůóç, čá ÷ńĺéáóôĺßôĺ "
-#~ "äéóęÝôôá ĺęęßíçóçň\n"
-#~ "ăéá íá ôá ÷ńçóéěďđďéŢóĺôĺ!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ " - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "Ďé ęýńéĺň ĺđéëďăÝň ôďő SILO ĺßíáé:\n"
-#~ " - ĹăęáôÜóôáóç bootloader: Ďńßćĺé ôď đďý čÝëĺôĺ íá ĺăęáôáóôáčďýí ďé "
-#~ "áđáńáßôçôĺň\n"
-#~ "ăéá ôçí ĺęęßíçóç ôďő GNU/Linux đëçńďöďńßĺň. Ĺęôüň ęé áí îÝńĺôĺ ôé áęńéâţň "
-#~ "ęÜíĺôĺ,\n"
-#~ "ĺđéëÝîôĺ \"Đńţôďň ôďěÝáň ôďő äßóęďő (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - ĘáčőóôÝńçóç đńéí ôçí ĺęęßíçóç: Ďńßćĺé ôá äÝęáôá ôďő äĺőôĺńďëÝđôďő\n"
-#~ "đďő ôď óýóôçěá čá đĺńéěÝíĺé đńéí ĺęęéíŢóĺé ôď đńţôď ëĺéôďőńăéęü.\n"
-#~ "Áőôü ĺßíáé óőíŢčůň ÷ńŢóéěď óĺ óőóôŢěáôá đďő ĺęęéíďýí áđü ôďí äßóęď\n"
-#~ "áěÝóůň ěĺôÜ ôçí ĺíĺńăďđďßçóç ôďő đëçęôńďëďăßďő. Äĺí őđÜń÷ĺé ęáčőóôÝńçóç\n"
-#~ "ĺÜí ď áńéčěüň đáńáëĺéöčĺß Ţ ĺßíáé ěçäÝí."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Ôţńá đńÝđĺé íá ńőčěßóĺôĺ ôď X Window System, ôď ďđďßď ĺßíáé ď \n"
-#~ "đőńŢíáň ôďő ăńáöéęďý đĺńéâÜëëďíôďň (GUI) ôďő GNU/Linux. ĐńÝđĺé íá\n"
-#~ "ńőčěßóĺôĺ ôçí ęÜńôá ăńáöéęţí ęáé ôçí ďčüíç óáň. Ôď ěĺăáëýôĺńď\n"
-#~ "ěÝńďň ôçň äéáäéęáóßáň ĺßíáé áőôďěáôďđďéçěÝíď, ďđüôĺ ç óőěâďëŢ\n"
-#~ "óáň óőíßóôáôáé óôçí ĺđéâĺâáßůóç ęáé áđďäď÷Ţ ôůí áőôďěÜôůí \n"
-#~ "ńőčěßóĺůí :)\n"
-#~ "\n"
-#~ "\n"
-#~ "źôáí ďëďęëçńůčĺß ç äéáäéęáóßá ńýčěéóçň, čá îĺęéíŢóĺé ôď\n"
-#~ "X Window óýóôçěá (ĺęôüň ĺÜí ĺóĺßň áđďöáóßóĺôĺ áëëéţň), ăéá\n"
-#~ "íá ĺëÝăîĺôĺ ĺÜí ďé ńőčěßóĺéň óáň éęáíďđďéďýí. ĹÜí ü÷é, \n"
-#~ "ěđďńĺßôĺ íá ĺđéóôńÝřĺôĺ ĺäţ ęáé íá ĺđáíáëÜâĺôĺ ôéň ńőčěßóĺéň\n"
-#~ "üóĺň öďńÝň ÷ńĺéáóôĺß."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "ĹÜí ęÜôé äĺí đÜĺé ęáëÜ ěĺ ôéň ńőčěßóĺéň ôůí ×, ÷ńçóéěďđďéĺßóôĺ áőôÝň ôéň\n"
-#~ "ĺđéëďăÝň ăéá íá ńőčěßóĺôĺ óůóôÜ ôď ăńáöéęü đĺńéâÜëëďí (X Window System)."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "ĹÜí đńďôéěÜôĺ ĺęęßíçóç óĺ ăńáöéęü đĺńéâÜëëďí ĺđéëÝîôĺ \"Íáé\". Áëëéţň, \n"
-#~ "ĺđéëÝîôĺ \"ź÷é\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ íá ĺđéëÝîĺôĺ Ýíá ĺđßđĺäď áóöÜëĺéáň ăéá ôď óýóôçěÜ óáň. Đáńáęáëţ "
-#~ "äéáâÜóôĺ ôď manual ăéá đëŢńĺéň\n"
-#~ " đëçńďöďńßĺň. ÂáóéęÜ, áí äĺí îÝńĺôĺ ôß íá ĺđéëÝîĺôĺ, ęńáôŢóôĺ ôçň "
-#~ "đńďęáčďńéóěÝíĺň ĺđéëďăÝň.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Ôď óýóôçěÜ óáň čá ĺđáíĺęęéíŢóĺé.\n"
-#~ "\n"
-#~ "ĚĺôÜ ôçí ĺđáíĺęęßíçóç, ôď íÝď óáň Mandrake Linux óýóôçěá čá îĺęéíŢóĺé\n"
-#~ "áőôüěáôá. ĹÜí čÝëĺôĺ íá ĺęęéíŢóĺôĺ Ýíá Üëëď őđÜń÷ďí ëĺéôďőńăéęü, "
-#~ "đáńáęáëţ\n"
-#~ "äéáâÜóôĺ ôéň ó÷ĺôéęÝň ďäçăßĺň."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "ÔóÝ÷éęď (ĐńďăńáěěáôéóôÝň)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Óëďâáęßáň (đńďăńáěěáôéóôÝň)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "źíďěá ôďő đńďößë ăéá äçěéďőńăßá:"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Ĺî' ďńéóěďý Runlevel"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "ÁđďčŢęĺőóç /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Ěďńöďđďßçóç üëůí"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "ĚĺôÜ ôçí ěďńöďđďßçóç üëůí ôůí ęáôáôěŢóĺůí,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "üëá ôá äĺäďěÝíá óĺ áőôÝň ôéň ęáôáôěŢóĺéň čá ÷áčďýí"
-
-#~ msgid "Reload"
-#~ msgstr "Ĺđáíáöüńôůóç"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "ČÝëĺôĺ íá äçěéďőńăŢóĺôĺ ěéá äéóęÝôôá áőôüěáôçň ĺăęáôÜóôáóçň ăéá "
-#~ "ęëůíďđďßçóç áőôŢň ôçň ĺăęáôÜóôáóçň;"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Ńőčěßóĺéň ADSL"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue name missing!"
-#~ msgstr "źíďěá áđďěĺěáęńőóěÝíçň ďőńÜň ëĺßđĺé!"
-
-#~ msgid ""
-#~ "Here you can specify any arbitrary command line into which the job should "
-#~ "be piped instead of being sent directly to a printer."
-#~ msgstr ""
-#~ "Ĺäţ ěđďńĺßôĺ íá ďńßóĺôĺ ěéá ăńáěěŢ ĺíôďëţí óôçí ďđďßá ç äéĺńăáóßá čá "
-#~ "äéáóůëçíţíĺôáé áíôß íá óôÝëíĺôáé ęáôĺőčĺßáí óôďí ĺęôőđůôŢ."
-
-#~ msgid "Command line"
-#~ msgstr "ĂńáěěŢ ĺíôďëţí"
-
-#~ msgid "A command line must be entered!"
-#~ msgstr "Ěéá ăńáěěŢ ĺíôďëţí đńÝđĺé íá ĺéóá÷čĺß!"
-
-#~ msgid "Enter Printer Name and Comments"
-#~ msgstr "ĹéóÜăĺôĺ ôď üíďěá ôďő ĺęôőđůôŢ ęáé ó÷üëéá"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Ôá đĺńéĺ÷üěĺíá ôďő áń÷ĺßďő ńőčěßóĺůí äĺí ěđďńďýí íá ěĺôáöńáóôďýí"
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Ěç áíáăíůńßóéěď áń÷ĺßď ńőčěßóĺůí"
-
-#~ msgid "Adapter"
-#~ msgstr "Adapter"
-
-#~ msgid "Disable network"
-#~ msgstr "Áđĺíĺńăďđďßçóç äéęôýďő"
-
-#~ msgid "Enable network"
-#~ msgstr "Ĺíĺńăďđďßçóç äéęôýďő"
-
-#~ msgid "Network Monitoring"
-#~ msgstr "Ĺđßâëĺřç Äéęôýďő"
-
-#~ msgid "Profile "
-#~ msgstr "Đńďößë "
-
-#~ msgid "Statistics"
-#~ msgstr "ÓôáôéóôéęÜ"
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Ôá÷ýôçôá ÁđďóôďëŢň: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ôá÷ýôçôá ËŢřçň: "
-
-#~ msgid "Logs"
-#~ msgstr "Logs"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Óýíäĺóç óôď äéáäßęôőď (internet)"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Áđďóýíäĺóç áđü ôď äéáäßęôőď (internet)"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Áđďóýíäĺóç áđü ôď äéáäßęôőď (internet) áđÝôő÷ĺ."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Áđďóýíäĺóç áđü ôď äéáäßęôőď (internet) ďëďęëçńţčçęĺ"
-
-#~ msgid "Connection complete."
-#~ msgstr "Ç óýíäĺóç ďëďęëçńţčçęĺ"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Ç óýíäĺóç áđÝôő÷ĺ.\n"
-#~ "Ĺđéâĺâáéţóôĺ ôéň ńőčěßóĺéň óáň óôď ĘÝíôńď ĹëÝă÷ďő Mandrake."
-
-#~ msgid "sent: "
-#~ msgstr "áđďóôÜëčçęáí: "
-
-#~ msgid "received: "
-#~ msgstr "ĺëŢöčçóáí: "
-
-#~ msgid "average"
-#~ msgstr "ěÝóďň üńďň"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ ôţńá íá äďęéěÜóĺôĺ ôď đďíôßęé óáň. ÄďęéěÜóôĺ ôá đëŢęôńá ęáé ôď\n"
-#~ "ńďäÜęé ęáé âĺâáéůčĺßôĺ üôé üëá ëĺéôďőńăďýí üđůň đńÝđĺé. Áí ü÷é, ĺđéëÝîôĺ\n"
-#~ "\"Áęýńůóç\" ęáé ĺđéëÝîôĺ Üëëďí ďäçăü."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Óýíäĺóç DSL (Ţ ADSL)"
-
-#~ msgid "Choose"
-#~ msgstr "ĹđéëďăŢ"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Ěđďńĺßôĺ íá äţóĺôĺ ęáôĺőčĺßáí ôď URI ăéá đńüóâáóç óôďí ĺęôőđůôŢ ěÝóů CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Íáé, óôĺßëĺ äďęéěáóôéęŢ óĺëßäá ASCII"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Íáé, óôĺßëĺ äďęéěáóôéęŢ óĺëßäá PostScrip"
-
-#~ msgid "Yes, print both test pages"
-#~ msgstr "Íáé, óôĺßëĺ ęáé ôéň äýď äďęéěáóôéęÝň óĺëßäĺň"
-
-#~ msgid "Paper Size"
-#~ msgstr "ĚÝăĺčďň ÷áńôéďý"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "ÁđďâďëŢ ÷áńôéďý ěĺ ôď đÝńáň ôçň ĺęôýđůóçň;"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "ĹđéëďăÝň ďäçăďý Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "ĹđéëďăÝň âÜčďőň ÷ńţěáôďň"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Ĺęôýđůóç ęĺéěÝíďő óáí PostScript;"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Äéüńčůóç ęĺéěÝíďő-óęÜëáň;"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Áńéčěüň óĺëßäůí áíÜ óĺëßäĺň ĺîüäďő"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "ÁńéóôĺńÜ/äĺîéÜ đĺńéčţńéá óĺ óôéăěÝň (1/72 ôçň ßíôóáň)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "ĐÜíů/ęÜôů đĺńéčţńéá óĺ óôéăěÝň (1/72 ôçň ßíôóáň)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "ĹđéđëÝďí ĺđéëďăÝň GhostScript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "ĹđéđëÝďí ĺđéëďăÝň ęĺéěÝíďő"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Áíôßóôńďöç óĺéńÜ óĺëßäůí;"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Ôńüđďň óýíäĺóçň áđďěĺěáęńőóěÝíďő ĺęôőđůôŢ"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected.\n"
-#~ "In case of doubt, select \"Remote CUPS server\"."
-#~ msgstr ""
-#~ "Ěĺ ôçí ÷ńŢóç ĺîőđçńĺôçôŢ CUPS, äĺí ÷ńĺéÜćĺôáé íá ńőčěßóĺôĺ ĺęôőđůôÝň \n"
-#~ "ĺäţ. Ďé ĺęôőđůôÝň čá áíáăíůńéóôďýí áőôüěáôá. Áí Ý÷ĺôĺ áěöéâďëßá, "
-#~ "ĺđéëÝîôĺ\n"
-#~ "\"ĹîőđçńĺôçôŢ CUPS\"."
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "ĘÜčĺ ĺęôőđůôŢň ÷ńĺéÜćĺôáé Ýíá üíďěá (ăéá đáńÜäĺéăěá lp). Ěđďńďýí ĺđßóçň "
-#~ "íá \n"
-#~ "ďńéóôďýí Üëëĺň đáńÜěĺôńďé üđůň đĺńéăńáöŢ Ţ ç ôďđďčĺóßá. Ôé üíďěá íá \n"
-#~ "ďńßóů ăé áőôüí ôďí ĺęôőđůôŢ ęáé đţň ĺßíáé óőíäĺäĺěÝíďň ď ĺęôőđůôçň;"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "ĘÜčĺ ďőńÜ ĺęôőđůôŢ (óôçí ďđďßá óôÝëíďíôáé ďé ĺęôőđţóĺéň) ÷ńĺéÜćĺôáé\n"
-#~ "Ýíá üíďěá (óő÷íÜ lp) ęáé Ýíáí ęáôÜëďăď. Ôé üíďěá ęáé ęáôÜëďăď íá \n"
-#~ "ďńßóů ăé áőôŢí ôçí ďőńÜ ĺęôőđůôŢ ęáé đţň ĺßíáé óőíäĺäĺěÝíďň ď ĺęôőđůôçň;"
-
-#~ msgid "Name of queue"
-#~ msgstr "źíďěá ďőńÜň"
-
-#~ msgid "Spool directory"
-#~ msgstr "ĘáôÜëďăďň"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "DNS 2"
diff --git a/perl-install/share/po/eo.po b/perl-install/share/po/eo.po
deleted file mode 100644
index 431df175c..000000000
--- a/perl-install/share/po/eo.po
+++ /dev/null
@@ -1,11770 +0,0 @@
-#
-# MESAŘOJ DE DrakX
-# D. Dale Gulledge <dsplat@rochester.rr.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2001-08-02 22:36-0500\n"
-"Last-Translator: D. Dale Gulledge <dsplat@rochester.rr.com>\n"
-"Language-Team: Esperanto <eo@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-3\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Plur-ekrana konfiguraźo"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafika karto"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Elektu grafikan karton"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Elektu X servilon"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X servilo"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Elektu X servilon"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X servilo"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Kiun konfiguron de XFree vi deziras havi?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vi povas havi 3D aparatan akceladan subtenon kun XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s kun 3D aparata akcelado"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE ĆI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s kun EKSPERIMENTA 3D aparata akcelado"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun XFree %s.\n"
-"NOTU KE ĆI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
-"KOMPUTILON.\n"
-"XFree %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree Konfigurado"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Elektu memorkapaciton de via grafika karto"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Elektu ekranon"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Ekrano"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"La du gravegaj parametroj estas la vertikala refreţigrapido (vertical\n"
-"refresh rate) kiu estas la rapido por refreţigi la tutan ekranon, kaj\n"
-"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
-"la rapido por montri skanliniojn.\n"
-"\n"
-"Ři estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
-"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
-"difektus vian ekranon. Se vi dubas, elektu zorgeman opcion."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontala sinkronrapido (horizontal sync rate)"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikala refreţigrapido (vertical refresh rate)"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Grafika karto ne jam konfigurita"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Vi ne jam elektas distingivojn"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Averto: provado de ći tiu grafika karto eble svenigos vian komputilon"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Provu konfiguraźon"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"penu ţanři iom da parametroj"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Eraro okazis:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Mi eliros post %d sekundoj"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ću tio ći pravas?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Eraro okazis, penu ţanři iom da parametroj"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Distingivo"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Elektu distingivon kaj kolorprofundon"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafika karto: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 servilo: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Plu"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Jeso"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Spertula Modalo"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Montru tuton"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Distingivoj"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavara aranřo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Speco de muso: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Musaparato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ekrano: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekrana vertikala refreţigrapido (vertical refresh rate): %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafika karto: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Grafika karto: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Graifka memoro: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorprofuneco: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Distingivo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 servilo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 pelilo: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparas X-Fenestran konfiguraźon"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Kion vi deziras fari?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Ţanřu Ekranon"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Ţanřu Grafika karto"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Ţanřu Servilajn opciojn"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Ţanřu distingivon"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Montru informon"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Provu denove"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Ćesu"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Ću vi deziras teni la ţanřojn?\n"
-"Nuna konfiguro estas:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X Fenestro će komenco"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mi povas konfiguri vian komputilon tiel ke ři aýtomate lanćos X kiam ři\n"
-"ekfunkcias. Ću vi deziras ke X aýtomate lanćos?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Bonvolu resaluti en %s-n por aktivigi la ţanřojn."
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Bonvole adiaýu kaj sekve uzu Kontrol-Alt-Retropaţo (Ctrl-Alt-Backspace)."
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 koloroj (8 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil koloroj (15 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil koloroj (16 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milionoj koloroj (24 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miliardoj koloroj (32 bitoj)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB aý pli"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Normala VGA, 640x480 će 60 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Supera VGA, 800x600 će 56 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr ""
-"8514 kongrua karto, 1024x768 će 87 hercoj (Hz) interplektita (neniu 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr ""
-"Supera VGA, 1024x768 će 87 hercoj (Hz) interplektita, 800x600 će 56 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Etendita Supera VGA, 800x600 će 60 hercoj (Hz), 640x480 će 72 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr ""
-"Neinterplektita Supera VGA, 1024x768 će 60 hercoj (Hz), 640x480 će 72 hercoj"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Altfrekvenca Supera VGA, 1024x768 će 70 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1024x768 će 60 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1280x1024 će 74 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Plurfrekvenca kiu povas fari 1280x1024 će 76 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Ekrano kiu povas fari 1600x1200 će 70 hercoj (Hz)"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Ekrano kiu povas fari 1600x1200 će 76 hercoj (Hz)"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Unua sektoro de starta subdisko"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Unu sektoro de drajvo (ĆefStartRikordo)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO Instalado"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kie vi deziras instali la startţargilon?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Instalado"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr ""
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr ""
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr ""
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr ""
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Startţargilo ćefaj opcioj"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Startţargilo por uzi"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Startţargila instalado"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Starta aparato"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne funkcias kun malnovaj BIOSoj)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakta"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakta"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Grafika reřimo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Prokrastoperiodo antaý starti defaýltan sistemon"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Pasvorto"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Pasvorto (denove)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Limigu komandliniajn opciojn"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "limigu"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Purigu /tmp dum ćiuj startadoj"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Ebligu multoblajn profilojn"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Donu kvanton de memoro en MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Bonvole provu denove"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr ""
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Defaýlta Mastruma Sistemo?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Jen la diversaj enskriboj.\n"
-"Vi povas aldoni pli aý ţanři la ekzistantajn."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Aldonu"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Finata"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Ţanřu"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kiun specon de enskribo vi deziras aldoni"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linukso"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Alia Mastruma Sistemo (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Alia Mastruma Sistemo (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Alia Mastruma Sistemo (Vindozo...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Kerna bildo"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Radiko"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Alfiksu"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lega-skriba"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabelo"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Danřera"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etikedo"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Defaýlta"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-grandeco"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Forigu enskribon"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Malplena etikedo ne estas permesata"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Vi devas havi interţanřan subdiskon"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ći tiu etikedo estas jam uzata"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Trovis %s %s interfacojn"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Ću vi havas alian?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ću vi havas iun %s interfacon?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Jes"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Vidu hardvaran informon"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalas pelilon por %s karto %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kiun %s pelilon devus mi provi?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Iuokaze, la %s pelilo bezonas havi aldonan informon por řuste funkcii,\n"
-"kvankam ři normale funkcias bone sen la informo. Ću vi deziras specifi\n"
-"aldonajn opciojn por ři aý permesi al la pelilo esplori vian komputilon\n"
-"por la informo ři bezonas? Kelkfoje, esplori svenas komputilon, sed\n"
-"ři ne devus kaýzi difekton."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Aýtomate esploru"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Specifu opciojn"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nun vi povas provizi řiajn opciojn al modulo %s.\n"
-"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
-"Ekzemple, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulaj opcioj:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ţargado de modulo %s malsukcesis.\n"
-"Ću vi deziras trovi denove kun aliaj parametroj?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(jam aldonis %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ći tiu pasvorto estas tro simpla"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Bonvole donu salutnomon"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ći tiu salutnomo estas jam aldonita"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Aldonu uzanto"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Enigu uzanton\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Akceptu uzanto"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Vera nomo"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Salutnomo"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Ţelo"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Piktogramo"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Aýtomata-enregistrado"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mi povas konfiguri vian komputilon por aýtomate enregistri unu uzulon kiam\n"
-"ři startas. Se vi ne deziras uzi ći tion, alklaku la `Nuligu' butonon."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Elektu la defaýltan uzulon:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Elektu la fenestro-administrilon por lanći:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaý la instalado"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Ćiuj"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Aldonu uzulon"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Akomodata"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS startas"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Ći tiu pakaźo devus esti promociata.\n"
-"Ću vi certas ke vi deziras malelekti řin?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Nuligu"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bonvenon Al Rompistoj"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Malbona"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Laýnorma"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alta"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alta"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoja"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"vi devus uzi ći tiun nivelon zorge. Ři faras vian komputilon pli facila\n"
-"por uzi, sed delikatega: vi devus neniam uzi ři surrete.\n"
-"Ři ne havas pasvortojn."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankoraý\n"
-"ne rekomendita."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ći tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
-"por konekti al la Interreto kiel kliento. Nun estas sekurecaj kontroloj."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Kun ći tiu sekurnivelo, uzado de ći tiu komputilo kiel servilo ebliřas.\n"
-"La sekureco nun estas sufiće alta por uzi la sistemon kiel servilo kiu\n"
-"akceptas konektojn de multaj klientoj."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
-"malfermita. Sekurecaj aspektoj estas će iliaj maksimumoj."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Elektu sekurnivelon?"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Elektas sekurnivelon"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Elektu opciojn por servilo"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bonvenon al %s, la mastruma sistema elektilo!\n"
-"\n"
-"Elektu mastruman sistemon de la supra listo aý\n"
-"atendu dum %d sekundoj por defaýlta starto.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bonvenon al GRUB la elektilo por mastrumaj sistemoj!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Uzu la %c kaj %c klavoj por elekti kiun enskribon estas emfazata."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Premu la enenklavon por starti la elektatan mastruman sistemon, 'e' por\n"
-"redakti la"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "ordonoj antaux startado, aux 'c' por uzi komandan linion."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "La emfazata enskribo startos auxtomate post %d sekundoj."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "mankas sufiće da spaco en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Desktop"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kie vi deziras instali la startţargilon?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-#, fuzzy
-msgid "Boot Style Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Dosiero"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Dosiero/_Eliru"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>E"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NovStila Ekrano"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicia Ekrano"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicia Gtk+ Ekrano"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modalo"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modalo"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguru"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistema modalo"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Jes"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr ""
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutoj"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundoj"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaý la instalado"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "France"
-msgstr "Franca"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Germana"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Greka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norvega"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Sveda"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Itala"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Bonvolu fari rezervan kopion de via dateno antaýe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Legu zorge"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
-"sufićas)\n"
-"će la komenco de la disko"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Eraro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Sorćisto"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Elektu agon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Vi havas unu grandan FAT subdiskon.\n"
-"(řenerale uzata de MicroSoft DOS/Vindozo).\n"
-"Mi sugestas ke vi unue regrandecigi tiun subdiskon\n"
-"(klaku sur řin, kaj poste klaku sur \"Regrandecigu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detaloj"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "Dosierlokigtabelo (FAT)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "muntado malsukcesis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Interţanřa"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Malplena"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Alia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Specoj de dosiersistemoj:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Kreu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Uzu ``%s'' anstataýe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Forigu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Uzu ``Malmuntu'' antaýe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi ţanřas la specon de subdisko %s, ćiuj datenoj en ći tiu subdisko "
-"estos\n"
-"perdata"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Elektu agon"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Kreu novan subdiskon"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Ţanřu al Spertula reřimo"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ţanřu al Normala reřimo"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Malfaru"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Ću mi devus daýri malgraýe?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Ću eliru sen konservi"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Ću eliru sen skribi la subdisktabelon?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Aýtomate disponigu"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Forviţu ćion"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Ćiuj el la subdiskoj estas uzata"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
-"subdiskon"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Skribu subdiskotabelon"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Sava subdiskotabelo"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Aýtomata muntado de demetebla medio"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Elektu dosieron"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La rezerva subdisktabelo ne estas la sama grandeco\n"
-"Ću daýras tamen?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Averto"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Enţovu disketon en drajvo\n"
-"Ćiuj datenoj sur tiu disketo estos perdata"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Provas savi subdisktabelon"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Montru informon"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Surmetingo"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcioj"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Regrandecigu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Movu"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatu"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Muntu"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Malmuntu"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Ţanřu RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Uzu por retrokonektado"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Kreu novan subdiskon"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Komenca sektoro: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Grandeco en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Speco de dosiersistemo: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Surmetingo: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Prefero: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Ţanřu subdiskspecon"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Kiun dosierosistemo vi deziras uzi?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kie vi deziras munti retrokonektan dosieron %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kie vi deziras munti aparato %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne povas malfiksi surmetingon ćar ći tiu subdisko estas uzata por\n"
-"retrokonektado. Unue forigu la retrokonektadon."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Kalkulas FAT dosiersistemajn limojn"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Regrandecigas"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ći tiu subdisko ne estas regrandecigebla"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Ćiuj datenoj en ći tiu subdisko devus esti rezervata"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi regrandecigas subdiskon %s, ćiuj datenoj en ći tiu subdisko estos\n"
-"perdata"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Elektu la novan grandecon"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Grandeco en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Al kiu disko vi deziras movi?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektoro"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Al kiu sektoro vi deziras movi?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Movante"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Movas subdisko..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nova"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr ""
-"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
-"aldoni al"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Vi ne povas uzi ći tiun subdiskon por retrokonektado"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Retrokonektado"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Retrokonekta dosieronomo: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Vera nomo"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Alia retrokonektado jam uzas tiun dosieron, elektu alian"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Dosiero jam ekzistas. Ću vi deziras uzi řin?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Modulaj opcioj:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "aparato"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivelo"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "grandeco de pecoj"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Zorgu: ći tiu operacio estas danřera."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kiun specon de subdiskado?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Bedaýrinde mi ne kreas /boot tiom longe sur la drajvon (će cilindro > "
-"1024).\n"
-"Aý vi uzos LILO kaj ři ne funkcios, aý vi ne uzos LILO kaj vi ne bezonas\n"
-"/boot."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La subdiskon vi elektis por aldoni kiel la radiko (root, /) estas fizike\n"
-"situanta preter la 1024a cilindro de la drajvo, kaj vi ne havas /boot\n"
-"subdiskon. Se vi intencas uzi la LILO startadministranto, zorgu aldoni\n"
-"/boot subdiskon."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
-"Neniu startţargilo povas trakti tiun sen /boot subdisko.\n"
-"Do zorgu aldoni /boot subdiskon."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Vi bezonos restarti antaý ol la ţanřo povas efektiviři"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi formatas la subdiskon %s, ćiuj datenoj en ći tiu subdisko estos\n"
-"perdata"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatas"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatas subdiskon %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid malsukcesis"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Mankas sufićan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Mankas sufićan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Distingivo: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Aparato: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Speco: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nomo: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Komenco: sektoro %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Grandeco: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoroj"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "De cilindro %d al cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatita\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ne formatita\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Muntita\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Retrokonekta(j) dosiero(j): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Subdisko startata defaýlte\n"
-" (por MS-DOS starto, ne por \"lilo\")\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivelo %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Grandeco de pecoj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Retrokonekta dosieronomo: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grandeco: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Informo: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Subdiskotabelospeco: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "će buso %d identigaźo %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcioj: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Speco de dosiersistemo: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ći tiu pasvorto ests tro simpla (ři devas esti almenaý %d signoj longa)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Ţanřu subdiskspecon"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "DNA servilo"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatado de %s malsukcesis"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne scias kiel formati %s kiel speco %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eraro dum malmunti %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simpla"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servilo"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Surmetingoj devas komenci kun antaýa /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jam estas subdisko kun surmetingo će %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ći tiu dosierujo devus resti interne de la radika dosierosistemo (/)"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "Vi bezonas veran dosiersistemon (ext2, reiserfs) por tiu surmetingo\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Vi bezonas veran dosiersistemon (ext2, reiserfs) por tiu surmetingo\n"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Mankas sufićan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Eraro dum malfermado de %s por skribi: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
-"novajn dosiersistemojn. Bonvolu kontroli vian ekipaźon por la kaýzo de ći "
-"tiu problemo."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Vi ne havas iujn ajn subdiskojn!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Nun vi povas elekti kiujn servojn vi deziras starti kiam vi startas\n"
-"vian komputilon. Kiam via muso estas supre de ero, malgranda balono\n"
-"ekaperas por helpi vin. Ři priskribas la rolon de la servo.\n"
-"\n"
-"Zorgegu en ći tiu paţo se vi intencas uzi vian komputilon kiel servilo:\n"
-"ne startu servojn kiujn vi ne deziras uzi."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Bonvolu elekti la řustan pordon. Ekzemple, la COM1-a\n"
-"pordo sub MS Vindozo estas nomata ttyS0 sub GNU/Linukso."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (la Linuksa Ţargilo) kaj Grub estas startţargiloj: ili povas starti\n"
-"aý GNU/Linukson aý iun ajn mastruman sistemon ćeestanta će via komputilo.\n"
-"Normale, ći tiuj aliaj mastrumaj sistemoj estas řuste detektata kaj\n"
-"instalada. Se tiel ne estas, vi povas aldoni enskribon mane per ći tiu\n"
-"ekrano. Zorgu elekti la řustajn parametrojn.\n"
-"\n"
-"\n"
-"Eble vi ankaý ne deziras doni atingon al ći tiuj aliaj mastrumaj sistemoj\n"
-"al iu ajn. Ćiokaze vi povas forstreki la respondajn enskribojn. Sed\n"
-"ćiokaze, vi bezonos startdiskon por starti ilin!"
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Vi bezonas indiki kie vi deziras meti la informon postulata\n"
-"por starti GNU/Linukson.\n"
-"\n"
-"\n"
-"Krom se vi scias precize kion vi faras, elektu \"Unua sektoro de\n"
-"drajvo (MBR)\""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX provos serći PCI-a(j)n SCSI-a(j)n adaptilo(j)n\n"
-"Se DrakX trovas SCSI-an adaptilon kaj scias kiun pelilon ři devas uzi\n"
-"ři aýtomate instalos řin (aý ilin).\n"
-"\n"
-"Se vi havas neniom da SCSI-aj adaptiloj, ISA-an SCSI-an adapilon, aý\n"
-"PCI-an SCSI-an adaptilon kiun DrakX ne rekonas DrakX demandos al vi\n"
-"se vi havas SCSI-an adaptilon sur via komputilo. Se vi ne havas adaptilon\n"
-"vi povas nur klaki 'Ne'. Se vi klakos 'Jes', DrakX montros al vi liston de\n"
-"peliloj. Vi povos elekti vian specifan pelilon de la listo.\n"
-"\n"
-"\n"
-"Se vi devas permane elekti vian adaptilon, DrakX demandos\n"
-"ću vi deziras specifi opciojn por ři. Vi devus permesi al DrakX\n"
-"esplori la aparaton por la opcioj. Ći tiu kutime bone funkcias.\n"
-"\n"
-"Se ne, vi bezonos provizi opciojn al la pelilo.\n"
-"Reviziu la Instalgvidlibron por sugestoj pri ekstrakado de ći tiu\n"
-"informo de Vindozo (se vi havas řin sur via komputilo),\n"
-"de dokumentaźo de aparato, aý de la TTT-ejo de la fabrikanto\n"
-"(se vi havas atingon al la reto)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Enţovu disketon en drajvo %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Eraro legante dosiero %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
-"funkcii.\n"
-"Vi povas trovi iun informon pri ili će: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vi devas havi radikan subdiskon.\n"
-"Por ći tiu, kreu subdiskon (aý klaku estantan).\n"
-"Sekve elektu la agon \"Surmetingo\" kaj faru řin '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Vi devas havi interţanřan subdiskon"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vi ne havas interţanřan subdiskon\n"
-"\n"
-"Ću vi deziras daýri tamen?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vi devas havi interţanřan subdiskon"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Uzu liberan spacon"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Mankas sufićan da libera spaco por disponigi novajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Ne ekzistas subdiskojn por uzi"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Uzu la Vindoza subdiskon por retrokonektado"
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kiun subdiskon vi deziras uzi por meti Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Elektu la grandecojn"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Radikosubdiska grandeco en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Interţanřa subdiska grandeco en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kiun subdiskon vi deziras regrandecigi?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
-"vian subdiskon, la sekvanta eraro okazis: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' antaýe"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AVERTO!\n"
-"\n"
-"DrakX nun regrandecigas vian Vindozan subdiskon. Zorgu: ći tiu operacio "
-"estas\n"
-"danřera. Se vi ne jam faris řin, vi devus antaýe eliru el la instalado, "
-"uzi\n"
-"\"scandisk\" sub Vindozo (kaj laývole \"defrag\"), kaj sekve relanću la\n"
-"instaladon. Ankaý vi devus fari rezervan kopion de via dateno.\n"
-"Kiam vi estas certa, klaku \"Jeso\"."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kiun grandecon vi deziras teni por Vindozo?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "subdisko: %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Regrandeciřo de FAT malsukcesis: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ne ekzistas FAT-ajn (Dosiero-Atingo-Tablo) subdiskojn por regrandecigi\n"
-"aý uzi kiel retrokonektaj subdiskoj (aý ne estas sufića da spaco)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Forviţu la tutan diskon"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Forigu Vindozon"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Ćiuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"
-
-#: ../../install_interactive.pm_.c:190
-#, fuzzy
-msgid "Custom disk partitioning"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Uzu fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nun vi povas dispartigi %s.\n"
-"Kiam vi finiřos, ne forgesu savi kun `w'."
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "La Dispartigsorćilo de DrakX trovis ći tiujn solvojn:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dispartigado malsukcesis: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Startado de la reto"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Haltas de la reto"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Eraro okazis, sed mi ne scias kiel trakti řin bone.\n"
-"Daýri je via propra risko."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Iuj gravaj pakaźoj ne estis taýge instalata.\n"
-"Aý via KDROM drajvo aý via KDROM disko estas difektita.\n"
-"Kontrolu la KDROM sur instalata komputilo per\n"
-"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bonvenon al %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Neniu disketilo havebla"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Eniras paţon `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Via sistemo havas malmulte da risurcoj. Eble vi havos problemojn pri\n"
-"instali Linuks-Mandrejkon. Se tio okazos, vi povos anstataý provi tekstan\n"
-"instaladon. Por ći tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
-"tajpu `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalklaso"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Bonvole, elektu unu el la sekvantaj specoj de instalado:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "La totala grandeco de la grupoj vi elektis estas proksimume %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se vi volas instali malpli ol ći tiu grandeco,\n"
-"elektu la procenton el la pakaźoj kiuj vi deziras instali.\n"
-"\n"
-"Malalta procento instalos nur la plej gravajn pakaźojn;\n"
-"100%% instalos ćiujn pakaźojn."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Vi havas spacon će via disko por nur %d%% da ći tiuj pakaźoj.\n"
-"\n"
-"Se vi deziras instali malpli ol tiom,\n"
-"elektu la procenton el la pakaźoj kiun vi deziras instali.\n"
-"Malalta procento instalos nur la plej gravajn pakaźojn;\n"
-"%d%% instalos tiom pakaźojn kiom eblajn."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vi povos elekti ilin pli precize en la sekvanta paţo."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Procento da pakaźoj por instali"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Elektado de Pakaźaj Grupoj"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Elektado de individuaj pakaźoj"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tuta grandeco: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Malbona pakaźo"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nomo: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Grandeco: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Graveco: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Vi ne povas elekti ći tiun pakaźon ćar ne estas sufiće da spaco por instali\n"
-"řin."
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "La sekvaj pakaźoj estos instalataj"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "La sekvaj pakaźoj estos malinstalataj"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Vi ne povas elektu/malelektu ći tiun pakaźon"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ći tiu estas deviga pakaźo, vi ne povas malelekti řin"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vi ne povas malelekti ći tiun pakaźon. Ři estas jam instalita."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ći tiu pakaźo devus esti promociata.\n"
-"Ću vi certas ke vi deziras malelekti řin?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Vi ne povas malelekti ći tiun pakaźon. Ři devus esti promociata."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalu"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Ţargu/Konservu sur disketo"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Elektado de individuaj pakaźoj"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eliru instalprogramon"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Elektu la pakaźojn kiuj vi deziras instali"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalanta"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Taksas"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restanta "
-
-#: ../../install_steps_gtk.pm_.c:528
-#, fuzzy
-msgid "Please wait, preparing installation"
-msgstr "Preparas instaladon"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakaźoj"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalanta pakaźo %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Akceptu"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Malakceptu"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ţanřu vian KDROM!\n"
-"\n"
-"Bonvole, enţovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas řin, klaku \"Nuligu\" por eviti la instaladon de ći tiu KDROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Ću vi deziras daýri tamen?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Estis eraro ordigi pakaźojn:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Estis eraro dum instalado de pakaźoj:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Eraro okazis"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licenca kontrakto"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klavaro"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aranřon."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Kiun instalklaso deziras vi?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalu/Řisdatigu"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Ću tiu ći estas instalado aý řisdatigado?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Rekomendata"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Spertulo"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Řisdatigu"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Elektado de individuaj pakaźoj"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Muspordo"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguras PCMCIA kartojn..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Konfiguras IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "neniuj haveblaj subdiskoj"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Elektu surmetingojn"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Mi ne povas legi vian subdisktabelon, ři estas tro difektita por mi :(\n"
-"Mi povas peni daýri per blankigi difektitajn subdiskojn (ĆIOM DA DATUMO\n"
-"pereos!). La alia solvo estas malpermesi al DrakX ţanři la subdisktabelon.\n"
-"(la eraro estas %s)\n"
-"\n"
-"Ću vi konsentas perdi ćiujn subdiskojn?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake malsukcesis řuste legi la subdisktabelon.\n"
-"Daýri je via propra risko!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Radikosubdisko"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Kiu estas la radikosubdisko (/) će via sistemo?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Vi bezonas restarti por la ţanřoj al la subdisktabelo efektivigi"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Ću kontrolas malbonajn blokojn?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatas subdiskojn"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreas kaj formatas dosieron %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nesufića interţanřospaco por plenumi instalado, bonvolu aldoni iom"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Serćas haveblajn pakaźojn"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Trovadas pakaźojn por promocii"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Via komputilo ne havas sufiće da spaco por instalado aý promocio (%d > %d)."
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompleta (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimuma (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Rekomendata (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Ţargu de disketo"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Ţargas de disketo"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Elektado de Pakaźoj"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Enţovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Konservu sur disketo"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se vi havas ćiujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-"Se vi havas neniujn de ći tiuj KDROM-oj, klaku \"Nuligu\".\n"
-"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
-"\"."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "KDROM etikedata \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparas instaladon"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalas pakaźo %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Enţovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Enţovu malplenan disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nun vi havas la ţancon elţuti softvaron por ćifrado.\n"
-"\n"
-"AVERTO:\n"
-"\n"
-"Pro malsamaj řeneralaj kondićoj aplikeblaj al ći tiu softvaro kaj trudata\n"
-"de diversaj jurisdikcioj, la kliento kaj/aý fina uzanto de tiu softvaro\n"
-"devus certigi ke la leřoj de lia/ilia jurisdikcio permesas li/ili elţuti,\n"
-"stoki kaj/aý uzi tiun softvaron.\n"
-"\n"
-"Plue, la kliento kaj/aý fina uzanto scios specife atentos ne malobei la\n"
-"leřojn de lia/ilia jurisdikcio. Se la kliento kaj/aý la fina uzanto\n"
-"malobeas tiujn aplikeblajn leřojn, li/ili altiros sur sin gravajn "
-"sankciojn.\n"
-"\n"
-"Neniuokaze aý Mandrakesoft aý řiaj fabrikistoj responsigos por specialaj,\n"
-"nerektaj aý hazardaj reparacioj kiuj ajn (inkluzive, sed ne limigite al\n"
-"perdo de profitoj, interrompo de komerco, perdo de komerca dateno kaj\n"
-"aliaj monaj malprofitoj, kaj rezultaj ţuldoj kaj indemizo pagenda konforme\n"
-"al prijuřo) rezulte el uzado, posedado, aý sole elţutado de tiu softvaro, "
-"al\n"
-"kiu la kliento kaj/aý fina uzanto ne povis atingi post subskribi la nunan\n"
-"kontrakton.\n"
-"\n"
-"Por iuj demandoj rilate al tiu kontrakto, bonvole demandu de\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Kontaktu la spegulon por havigi la liston de havebla pakaźoj"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elektu spegulon de kiu havigi la pakaźojn"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Kontaktu la spegulon por havigi la liston de havebla pakaźoj"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "kio estas vian horzonon?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Ću via hardvara horlořo estas řustigata en GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Servilo"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Neniu printilo"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Ću vi havas alian?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Muso"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printilo"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-karto"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Sonkarto"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokaj dosieroj"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Difinu pasvorton de root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Neniu pasvorto"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ći tiu pasvorto ests tro simpla (ři devas esti almenaý %d signoj longa)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Aýtentikigado"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Aýtentikiga LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Servilo"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Aýtentikiga NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS Domajno"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Servilo"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala startţargilo. Ći tiu estas utila se vi ne deziras\n"
-"instali SILO sur via sistemo, aý alia mastruma sistemo forigas SILO,\n"
-"aý SILO ne funkcias kun via aparato-konfiguraźo. Akomodita startdisketo "
-"ankaý\n"
-"povas esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniři de\n"
-"severaj sistemaj paneoj.\n"
-"\n"
-"Se vi deziras krei startdisketon por via sistemo, enţovu disketon en la\n"
-"unua drajvo kaj klaku \"JES\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Unua disketa drajvo"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Dua disketa drajvo"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ellasu"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Akomodita startdisketo provizas manieron de starti via Linuksa sistemo\n"
-"sendepende de la normala startţargilo. Ći tiu estas utila se vi ne deziras\n"
-"instali LILO (aý grub) sur via sistemo, aý alia mastruma sistemo forigas "
-"LILO,\n"
-"aý LILO ne funkcias kun via komputilo. Akomodita startdisketo ankaý povas\n"
-"esti uzata kun la Mandrejka savdisko, kiu plifaciligas resaniři de severaj\n"
-"sistemaj paneoj. Ću vi deziras krei startdisketo por via sistemo?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Bedaýrinde, neniu disketdrajvo havebla"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elektu la disketdrajvo vi deziras uzi por krei la startdisketon"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Enţovu disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Kreas startdisketon"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparas startţargilon"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Ću vi deziras uzi aboot-on?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eraro daýre mi instalis \"aboot\",\n"
-"Ću mi devus provi perforte instali eć se tio detruas la unuan subdiskon?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Instalu restart-ţargilon"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Instalado de startţargilo malsukcesis. La sekvanta eraro okazis:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Enţovu malplenan disketon en drajvo %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Kreas aýtoinstalan disketon"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Kreu aýtoinstalan disketon"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Aýtomata"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Reludu"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Elektado de individuaj pakaźoj"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrejka Instalado %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr " <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu mankas"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Elektu agon"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr ""
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Bonvole atendu"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informo"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Etendu Arbon"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Maletendu Arbon"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Ţanřu inter ebena kaj ordigita je grupoj"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Malbona elektaźo, provu denove\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Via elektaźo? (defaýlo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Via elektaźo? (defaýlo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcioj: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Ću vi deziras uzi aboot-on?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Via elektaźo? (defaýlo estas %s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ćeśa (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Germana"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak-a"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Hispana"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finna"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Franca"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norvega"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Pola"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Rusa"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sveda"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Unuiřinta Regna klavaro"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Usona klavaro"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albana"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armena (malnova)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armena (skribmaţina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armena (fonetika)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbajřana (latina)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armena (fonetika)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgara"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazila (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarusa"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Svisa (germana aranřo)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Svisa (franca aranřo)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ćeśa (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Germana (neniom da mortaj klavoj)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dana"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak-a (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak-a (Norvega)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak-a (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estona"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Kartvela (\"Rusa\" aranřo)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Kartvela (\"Latina\" aranřo)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Greka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Hungara"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israela"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israela (fonetika)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Irana"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islanda"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itala"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japana 106 klavoj"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korea klavaro"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinamerika"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litova AZERTY-a (malnova)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litova AZERTY-a (nova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litova \"numero-vica\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litova \"fonetika\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Loko"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedona"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nederlanda"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Pola (qwerty aranřo)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Pola (qwertz aranřo)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugala"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Kebeka)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumana (qwertz-a)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumana (qwerty-a)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rusa (Yawerty-a)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovena"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaka (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbajřana (cirila)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabelo"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Taja klavaro"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Taja klavaro"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turka (tradicia \"F\" modelo)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turka (moderna \"Q\" modelo)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajna"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Usona klavaro (internacia)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnama \"numero-vica\" QWERTY-a"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslava (latina/cirila)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirklaj surmetingoj %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Muso"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Lořiteka MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Nespecifa PS2 RadoMuso"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 butona"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Nespecifa 2 Butona Muso"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Genera"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rado"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seria"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Nespecifa 3 Butona Muso"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Mikrosofta IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Lořiteka MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Lořiteka CC serio"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Lořiteka MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serio"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Lořiteka Muso (seria, malnova C7 speco)"
-
-#: ../../mouse.pm_.c:66
-#, fuzzy
-msgid "busmouse"
-msgstr "Neniu Muso"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 butonoj"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 butonoj"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "neniu"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Neniu Muso"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Bonvole, provu la muson"
-
-#: ../../mouse.pm_.c:500
-#, fuzzy
-msgid "To activate the mouse,"
-msgstr "Bonvole, provu la muson"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVU VIAN RADON!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finu"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Sekvanta ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Antaýa"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Ću tio ći pravas?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektu al la Interreto"
-
-#: ../../network/adsl.pm_.c:20
-#, fuzzy
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La plej ofte uzata maniero por konekti kun ADSL estas dhcp + pppoe.\n"
-"Tamen, ekzistas konektojn kiuj nur uzas dhcp.\n"
-"Se vi ne scias, elektu 'uzu pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "uzu dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "uzu pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "uzu pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Kiun dhcp-an klienton vi deziras uzi?\n"
-"La defaýlto estas dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-#, fuzzy
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo. Bonvole lanću la\n"
-"aparatokonfigurilon."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Elektu la retan interfacon"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "neniu retkarto trovita"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Konfiguras reto"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Bonvole enigu vian poţtejon se vi scias řin.\n"
-"Iuj DHCP-aj serviloj bezonas poţtejon por funkcii.\n"
-"Via poţtejo devus esti plene specifita poţtejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Poţtejo"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Network Configuration Wizard"
-msgstr "ISDN-a Konfiguraźon"
-
-#: ../../network/isdn.pm_.c:22
-#, fuzzy
-msgid "External ISDN modem"
-msgstr "Interna ISDN-karto"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN-karto"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kia estas via ISDN-a konektaźo?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Konfiguraźo de barilo detektata!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Konfiguraźo de barilo detektata!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN-a Konfiguraźon"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Elektu vian interretprovizanton.\n"
-" Se řin ne estas en la listo, elektu Nelistiřitan"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protokolo"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eýropo (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "La cetero de la mondo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"La cetero de la mondo \n"
-" neniom da D-Kanelo (lukontraktataj lineoj)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Kiun protokolon vi deziras uzi?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kiun specon de karto vi havas?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Mi ne scias"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
-"řusta.\n"
-"\n"
-"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
-"por via karto.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Ćesigu"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Ću mi devus daýri?"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kiu estas via ISDN-a karto?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon. Bonvole "
-"elektu\n"
-"unu el la PCI-aj kartojn sur la sekvanta ekrano."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Neniu ISDN-a PCI-a karto trovata. Bonvole elektu unu el la PCI-aj kartojn "
-"sur\n"
-"la sekvanta ekrano."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Telefon-konektaj opcioj"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nomo de konekto"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonnumero"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Salutnomo"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP (Pasvorta Aýtentikigada Protokolo)"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Programeto-bazata"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Finaparato-bazata"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domajna nomo"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Unu DNS-a Servilo (nedeviga)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Du DNS-a Servilo (nedeviga)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Konfiguru interretan konektaźon"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektu"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Malkonektu"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Konfiguru retumon"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interreta konektaźo kaj konfiguro"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Konfiguru interretan konektaźon"
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr "Konfiguru interretan konektaźon"
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Reta Konfiguraźo"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Elektu la defaýltan uzulon:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detektas aparatojn..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Konfiguru interretan konektaźon"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Konfiguru interretan konektaźon"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN Konfiguraźo"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Reta interfaco"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "Cable connection"
-msgstr "Konfiguru interretan konektaźon"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Konfiguru interretan konektaźon"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN Konfiguraźo"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Elektu la ilon kiun vi deziras instali"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Ću vi deziras starti vian konektaźon je startado de la sistemo?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Reta Konfiguraźo"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-#, fuzzy
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVERTO: Ći tiu aparato estis antaýe konfigurata por konekti al la "
-"Interreto.\n"
-"Simple klaki JES por teni la konfiguron de ći tiu aparato.\n"
-"Se vi modifos la subajn kampojn, vi ţanřos ći tiun konfiguron."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bonvole enigu la IP-an konfigurâjon por ći tiu komputilo.\n"
-"Ćiu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
-"(ekzemple, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfiguras retan aparaton %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "XFree86 pelilo: %s\n"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-adreso"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Retmasko"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Aýtomata IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Bonvole enigu vian poţtejon.\n"
-"Via poţtejo devus esti plene specifita poţtejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
-"Vi ankaý povas enigi la IP-adreson de la prokura kluzo se via havas unu."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNA servilo"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Prokura kluzaparato"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP prokura servilo"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP prokura servilo"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Prokura servilo devus esti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Prokura servilo devus esti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ću vi deziras provi konekti al la interreto nun?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Konfiguru interretan konektaźon"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-#, fuzzy
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konfigurado de Konekto"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Bonvole plenigu aý marku la suban kampon"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ de Karto"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoro de Karto (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "I/O (Eneligo) de Karto"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "I/O 0 (Eneligo 0) de Karto"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "I/O 1 (Eneligo 1) de Karto"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Via persona telefonnumero"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telefonnumero de interretprovizanto"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Provizanto DNS 1 (nedeviga)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Provizanto DNS 2 (nedeviga)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Elektu vian klavaron"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Diskuma modalo"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Speco de konekto"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Speco de konekto"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Konta Salutnomo (uzula nomo)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Konta Pasvorto"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "muntado malsukcesis: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Ći tiu platformo ne subtenas etendatajn subdiskojn"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Vi havas truon en via subdisktabelo sed mi ne povas uzi řin.\n"
-"La sola solvo estas movi viajn ćefajn subdiskojn por situigi la truon\n"
-"apud la etendataj subdiskoj."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaýris el dosiero %s malsukcesis: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Eraro skribante al dosiero %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "havenda"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "grava(j)"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "tre agrabla(j)"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "agrabla(j)"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "elbe"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Loka printilo"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Malproksima printilo"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Malproksimaj lpd servilo"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Reta Printilo (TCP/ingo)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Vindozo 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printservilo"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printila Aparato URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Loka printilo"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Malproksima printilo"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Eraro skribante al dosiero %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP de SMB servilo"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Defaýlta)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kiel estas la printilo konektata?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-"ći tie; printiloj estos aýtomate dektektataj. Se vi havas dubojn,\n"
-"elektu \"Malproksima CUPS servilo\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN Konfiguraźo"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Pordo"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detektas aparatojn..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Provu pordojn"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Duobla surmetingo %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalanta pakaźo %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalanta pakaźo %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Por uzi malproksima lpd printvico, vi devas provizi la poţtejon de la\n"
-"printservilo kaj la printviconomon će tiu servilo en kiun taskoj devus\n"
-"esti metata."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Malproksima poţtejo"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Malproksima poţtejo"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Malproksima poţtejo"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Por printi al SMB-a printilo, vi devas provizi la SMB poţtejon (Notu! Ři "
-"eble\n"
-"estas malsama de řia TCP/IP nomo!) kaj eble la IP-adreson de la "
-"printservilo,\n"
-"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
-"taýgan salutnomon, pasvorton, kaj laborgrupan informon."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Poţtejo de SMB servilo"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Opuza nomo"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Laborgrupo"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
-"nomon (Notu! Ři eble estas malsama de řia TCP/IP nomo!) aldone al la\n"
-"printvican nomon por la printilo vi deziras atingi kaj iun ajn taýgan\n"
-"salutnomon kaj pasvorton."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printservilo"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Printvica Nomo"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Ing-Printilaj Opcioj"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Por printi al inga printilo, vi bezonas provizi la\n"
-"poţtejon de la printilo kaj opcie la pordnumeron."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printilaj Poţtejo"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printilaj Poţtejo"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printila Aparato URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nomo de printilo"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Priskribo"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Loko"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Ću tio ći pravas?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Kiun specon de printilo vi havas?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ću vi deziras provi printado?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Provu pordojn"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Jes, printu ambaý de la provpařojn"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printilo"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Laýnorma"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Printas provpařo(j)n..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Printas provpařo(j)n..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Printas provpařo(j)n..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Printas provpařo(j)n..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Provpařo(j)n estis sendataj al la printila demono.\n"
-"Ći tiu eble postulas iom da tempo antaý ol la printilo komencas.\n"
-"Printada stato:\n"
-"%s\n"
-"\n"
-"Ću ři řuste funkcias?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Provpařo(j)n estis sendataj al la printila demono.\n"
-"Ći tiu eble postulas iom da tempo antaý ol la printilo komencas.\n"
-"Ću ři řuste funkcias?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Malfermu"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Haltas de la reto"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Haltas de la reto"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Printilaj opcioj"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Neniu printilo"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Startas vian konektaźon..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Konfiguru retumon"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Konfiguras reto"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alta"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoja"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Konfiguru Printilon"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalanta pakaźo %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Printilaj opcioj"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Konfiguru Printilon"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Ću vi deziras konfiguri printilon?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Printilo"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Jen la sekvantaj printvicoj.\n"
-"Vi povas aldoni pli aý ţanři la ekzistantajn."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Jen la sekvantaj printvicoj.\n"
-"Vi povas aldoni pli aý ţanři la ekzistantajn."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Konfiguru retumon"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normala Modalo"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printilan Konekton"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Printas provpařo(j)n..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Malproksima printilo"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Loka printilo"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "porto"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Prokura servilo devus esti http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Prokura servilo devus esti ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Aýtomata-enregistrado"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "pasvorto"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Neniu pasvorto"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "La pasvortoj ne egalas. Provu denove!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne povas skribi dosieron %s."
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid malsukcesis"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid malsukcesis (eble raidtools mankas)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ne estas sufićaj subdiskoj por RAID nivelo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, perioda ordonvicigilo."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd estas uzata por monitori la bateriostaton kaj registri řin en la\n"
-"sistemlogdosiero (syslog). Vi ankaý povas uzi řin por halti la komputilon\n"
-"kiam la baterioţargo estas malgranda."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Lanćas ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
-"'at' estis uzata, kaj lanćas baćajn ordonojn kiam la ţargmezo estas\n"
-"sufiće malgranda."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron estas norma Uniksa programo kiu lanćas programojn kiujn la uzulo\n"
-"specifas je periodaj tempoj. vixie cron aldonas kelkajn trajtojn al la\n"
-"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
-"konfiguraj opcioj."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aldonas subtenon por musoj al teksta-reřimaj Linuksaj aplikoj ekzemple\n"
-"la 'Midnight Commander' (Meznokta Estro). Ankaý ři permesas uzi la muson\n"
-"por transpoţigi će la konzolo (Sen X Fenestroj)."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache estas Tut-Tera Teksaźa servilo. Ři liveras HTML-ajn dosierojn\n"
-"kaj CGI (komunakluza interfaco)."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"La interreta superservila demono (kutime nomata inetd) lanćas sortimenton\n"
-"da aliaj interretaj servoj laýbezone. Ři respondas por la lanćo de multaj\n"
-"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin. Se vi malţaltas inetd,\n"
-"ve malţaltas ćiujn el la servoj por kiuj ři respondas."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ći tiu pakaźo ţargas la elektitan klavarmapon laý /etc/sysconfig/keyboard.\n"
-"Vi povas elekti ći tion per la kbdconfig utilprogramo. Vi lasus ći tion\n"
-"ebligatan por la plejmulto da sistemoj."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd estas la printvica dajmono bezonata por lpr taýge funkcii. Ři estas\n"
-"baze servilo kiu arbitracias printajn taskojn al printilo(j)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"'named' (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
-"poţtejojn de IP adresoj."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Muntas kaj malmuntas ćiujn RetDosierSistemajn (NFS), SMB (Lan\n"
-"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ţaltas/Malţaltas ćiujn retajn interfacojn konfiguratajn por lanći\n"
-"dum sistemstartado."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Ći tiu servo provizas NFS dosierţlosado, kiun vi konfiguras per la\n"
-"/etc/exports dosiero."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Ći tiu servo provizas NFS dosierţlosado."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA subteno kutime estas subteno de aźo kiel ethernet kaj modemoj en\n"
-"tekkomputiloj. Ři ne estos lanćata krom se vi konfiguras ři por ke ři\n"
-"estu sendanřera će komputiloj kiuj ne bezonas řin."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
-"uzas.\n"
-"La pordmapservilo devas esti uzata će komputiloj kiuj agas kiel serviloj\n"
-"por protokoloj kiuj uzas la RPC mekanismon."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"\"Postfix\" estas PoţtTransportPerilo, kiu estas la programo kiu movas\n"
-"retpoţton de unu komputilo al alia."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Savas kaj restaýras sisteman entropikomunaźon por pli altkvalita\n"
-"generado de aleatoraj nombroj."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"La routed dajmono permesas aýtomatan řisdatigon de la IP enkursigila tabelo\n"
-"per la RIP protokolo. Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
-"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
-"pri la rapideco de iu ajn komputilo sur tiu reto."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
-"konektataj će aliaj respondantaj komputiloj."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"La rwho protokolo permesas al uzuloj havigi liston de ćiuj el la uzuloj\n"
-"konektataj će komputilo kiu estas uzanta la rwho dajmono (simila al finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
-"mesařojn al diversaj sistemlogdosieroj. Ři estas bona ideo ćiam uzi\n"
-"syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Startas kaj ćesigas la X Tiparan Servilon je starttempo kaj ćesiga tempo."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printilo"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Interreto"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistema modalo"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Datumbazoj"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "Servilo"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "running"
-msgstr "Averto"
-
-#: ../../services.pm_.c:198
-#, fuzzy
-msgid "stopped"
-msgstr "Alfiksu"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-#, fuzzy
-msgid "On boot"
-msgstr "Yaboot"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Stato:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektoro"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "La cetero de la mondo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Interreto"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Plurmedia - Grafiko"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-#, fuzzy
-msgid "Development"
-msgstr "Programisto"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Konekti al la interreto"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Reta interfaco"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Poţtejo de SMB servilo"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Ludoj"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Spertulo"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalanta pakaźo %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Mi ne povas legi vian subdisktabelon, ři estas tro difektita por mi :(\n"
-"Mi penos daýri per blankigi difektitajn subdiskojn"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Eraro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Gratulojn!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalu"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Aldonu uzulon"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Elektado de Pakaźoj"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Bonvole, elektu la pakaźojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Malinstalu printvicon"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Forigu Vindozon"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Salutnomo"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Bonvole provu denove"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Bonvole provu denove"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Neniu pasvorto"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN Konfiguraźo"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Elektu Printilan Konekton"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Bonvole, elektu vian klavaran aranřon."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Bonvole, elektu la pakaźojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Reta interfaco"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Salutnomo"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Bonvole, elektu la pakaźojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Salutnomo"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Rado"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Rado"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Modulaj opcioj:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Reta Konfiguraźo"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Bonvole, elektu la pakaźojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Bonvole, elektu la pakaźojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcioj"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Reta Konfiguraźo"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaýru de disketo"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Alia"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalu sistemon"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaýru de dosiero"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaýru de dosiero"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Akomodata"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Helpo"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Antaýa"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Stato:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Restaýru de dosiero"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Sekvanta ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Elektu pakaźojn"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Malbona rezerva dosiero"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Konservu en dosiero"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Bonvole, provu la muson"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Bonvole, elektu la pakaźojn kiujn vi deziras instali."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Reta Konfiguraźo"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Reta Konfiguraźo"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN Konfiguraźo"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN Konfiguraźo"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalado de %s malsukcesis. La sekvanta eraro okazis:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "neniu retkarto trovita"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Finata"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Preparas instaladon"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "limigu"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "limigu"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatu subdiskojn"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN Konfiguraźo"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Surmetingo"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Oficejo"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Ćesigu"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printilo"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalu sistemon"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Elektu dosieron"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Malproksima printilo"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalu"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Eliru instalprogramon"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:139
-#, fuzzy
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "malebligu"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "forsendu"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "rekonfiguru"
-
-#: ../../standalone/drakgw_.c:146
-#, fuzzy
-msgid "Disabling servers..."
-msgstr "Detektas aparatojn..."
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: ../../standalone/drakgw_.c:164
-#, fuzzy
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ebligu"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi řian Interretan konekton.\n"
-"Notu: vi bezonas dedićan Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"Ću vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaco %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo. Bonvole lanću la\n"
-"aparatokonfigurilon."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Reta interfaco"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
-"\n"
-"%s\n"
-"\n"
-"Ću vi deziras konfiguri vian Lokan Reton (LAN) kun ći tiu adaptilo?"
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Post-instala konfigurado"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP de SMB servilo"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Konfiguraźo de barilo detektata!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Averto. Ekzistanta konfiguraźo de barilo detektata. Vi eble devas permane\n"
-"fiksi řin poste de la instalado."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Mi konfiguras..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemoj instalante pakaźon %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:690
-#, fuzzy
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Interreta konektaźo kaj konfiguro"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Disdividado de Interreta Konekto"
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ISDN-a Konfiguraźon"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-#, fuzzy
-msgid "Profile: "
-msgstr "muntado malsukcesis: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Poţtejo: "
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "Interreto"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Speco:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Kluzo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "Interreto"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Stato:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Konfiguru servojn"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN Konfiguraźo"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Pelilo"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaco"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokolo"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Stato:"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Konfiguru lokan reton"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Sorćisto..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Apliku"
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Provu konfiguraźon"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektita"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ne konektita"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektu..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Malkonektu..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN Konfiguraźo"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptilo %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiva"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktiva"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Interreta konektaźo kaj konfiguro"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Interreta konektaźo kaj konfiguro"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Speco de konekto"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Kluzo"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Elektas sekurnivelon"
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Konekti al la interreto"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elektu la ilon kiun vi deziras instali"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanada (Kebeka)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Eýropo"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islanda"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Eýropo"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seria"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uzado: keyboarddrake [--expert] [klavaro]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aranřon."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Ţanřu KD-ROM-on"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Ţanřu vian KDROM!\n"
-"\n"
-"Bonvole, enţovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas řin, klaku \"Nuligu\" por eviti la instaladon de ći tiu KDROM."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-#, fuzzy
-msgid "Show only for the selected day"
-msgstr "Montru nur por ći tiu tago"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Dosiero/_Nova"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Dosiero/_Malfermu"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>M"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Dosiero/_Savu"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Dosiero/Savu _Kiel"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Dosiero/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcioj"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcioj/Provu"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Helpo"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Helpo/_Pri..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-iso8859-3,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-iso8859-3,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Salutnomo"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "mesařoj"
-
-#: ../../standalone/logdrake_.c:175
-#, fuzzy
-msgid "Syslog"
-msgstr "sistema logdosiero (syslog)"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "serću"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Ilo por vidi vian logdosieron"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Konfiguraźoj"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "konformanta(j)"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "sed ne konformanta(j)"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Elektu dosieron"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalendaro"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Enhavoj de la dosiero"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "bonvole atendu, mi vortanalizas la dosieron: %s"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Konfiguraźon"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "2a Etendata (Ext2)"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "Servilo"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatas"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Savu Kiel..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "neniu serial_usb (seria USB) trovita\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Ću vi deziras emuli trian musbutonon?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Elektu grafikan karton"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Starta aparato"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Konfiguraźo de barilo"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Konfiguraźo de barilo"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Elektu vian lingvon"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Elektu instalklason"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detektado de fiksdisko(j)"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguru muson"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Elektu vian klavaron"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Dosiersistemo konfiguro"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatu subdiskojn"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Elektu pakaźojn"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalu sistemon"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Aldonu uzulon"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguru retumon"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguru servojn"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalu restart-ţargilon"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Kreu praţargdisketon"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguru X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalu sistemon"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Eliru instalprogramon"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne povis malfermi %s por skribi: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Konfiguraźo de barilo"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Preparas instaladon"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "TTT/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Reta Printilo (ingo)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficejo"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnoma Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Plurmedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Database"
-msgstr "Datumbazoj"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentaro"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "Interreta Konfigurado"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Plurmedia - Sono"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN Konfiguraźo"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Office Workstation"
-msgstr "Laborstacio"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servilo"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C kaj C++ programadaj bibliotekoj, programoj kaj ćapdosieroj"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Reta Printilo (ingo)"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Dokumentaro"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Plurmedia - Grafiko"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Interreto"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktiloj, ţeloj, dosieriloj, terminaloj"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Plurmedia - KD-ROM Kreado"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Laborstacio"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Ćesigu"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#, fuzzy
-#~ msgid "None"
-#~ msgstr "Finata"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Elektu la defaýltan uzulon:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Malproksima printilo"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Nun vi povas provizi řiajn opciojn al modulo %s."
-
-#~ msgid "mount failed"
-#~ msgstr "muntado malsukcesis"
-
-#~ msgid "Low"
-#~ msgstr "Malalta"
-
-#~ msgid "Medium"
-#~ msgstr "Meza"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Malmultaj plibonigoj će ći tiu sekurnivelo, la ćefa estas ke ři havas "
-#~ "pli\n"
-#~ "multajn sekurecajn avertojn kaj kontrolojn."
-
-#~ msgid "Boot mode"
-#~ msgstr "Starta modalo"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Spertulo"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "GNU/Linukso administras tempon en GMT aý \"Grenvića Meza Tempo\" kaj "
-#~ "tradukas řin\n"
-#~ "en lokan tempon laý la horzono vi elektis."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Konektu al la Interreto"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Malkonektu el la Interreto"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Konfiguru interretan konektaźon"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Al kiu disko vi deziras movi?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Bonvole, elektu la pakaźojn kiujn vi deziras instali."
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Informo"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnoma Laborstacio"
-
-#~ msgid "authentification"
-#~ msgstr "aýtentikigado"
-
-#~ msgid "user"
-#~ msgstr "uzanto"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Bonvole, elektu la specon de via muso."
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Ćesu"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "Aýtomata muntado de demetebla medio"
-
-#~ msgid "Active"
-#~ msgstr "Aktiva"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ne"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Printilo, tipo \"%s\", estas detektita će "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Loka Printila Aparato"
-
-#~ msgid "Printer Device"
-#~ msgstr "Printila Aparato"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Malproksima CUPS-a servilo"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "Malproksima CUPS-a servilo"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linukso"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Sistema modalo"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Alia"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Bonvole, elektu vian klavaran aranřon."
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Bonvolu klaki sur subdiskon"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Speco: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Malbona rezerva dosiero"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Konfiguru X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Printila Aparato"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Nuligu"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Jeso"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Malfermu"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Startas vian konektaźon..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Fermas vian konektaźon..."
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "Kiel vi deziras konekti al la Interreto?"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Elektu la grandecon kiu vi deziras instali"
-
-#~ msgid "Total size: "
-#~ msgstr "Tuta grandeco: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Bonvolu atendi"
-
-#~ msgid "Total time "
-#~ msgstr "Tuta tempo "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Uzu ekzistantan konfiguron de X11 (X-fenestroj)?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Al kiu aparato estas via printilo konektata\n"
-#~ "(notu ke /dev/lp0 egalas LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#, fuzzy
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Averto, la retadaptilo estas jam konfigurata.\n"
-#~ "Ću vi deziras rekonfiguri řin?"
-
-#~ msgid "New"
-#~ msgstr "Nova"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Malproksima printvico"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Bonvolu klaki sur subdiskon"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambigueco (%s), esti pli preciza\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (defaýlto estas %s) "
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "Via elektaźo (defaýlto estas %s enigu `neniu' por elekti neniu) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Ću vi konsentas?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Ću vi deziras provi la konfiguraźon?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Krom se vi scias precize alie, la kutima elekto estas \"/dev/hda\"\n"
-#~ " (unua ćefa IDE-a disko) aý \"/dev/sda\" (unua SCSI-a disko)."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Speco de konekto"
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Elektu la defaýltan uzulon:"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Bonvole, provu la muson"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr ""
-#~ "Bonvole elektu vian preferatan lingvon por instalado kaj sistema uzado."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Elektu la aranřon de via klavaro el la listo supre"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Elektu:\n"
-#~ "\n"
-#~ " - Akomodata: Se vi sufiće konas GNU/Linukson, vi povas elektu la ćefan\n"
-#~ " uzadon por via komputilo. Vidu malantaýe por detaloj.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Spertulo: Ći tio supoza ke vi flue konas GNU/Linukson kaj deziras "
-#~ "fari\n"
-#~ " treege akomodatan instaladon. Simile kiel \"Akomodata\" instalado, "
-#~ "vi povos\n"
-#~ " elekti la uzado por via komputilo.\n"
-#~ " Sed bonvolege, NE ELEKTU ĆI TION KROM SE VI SCIAS KION VI FARAS!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ " at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ " will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ " or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ " SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ " server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Nun vi devas elekti la uzadon por via komputilo. Jen la elektoj:\n"
-#~ "\n"
-#~ "* Laborstacio: ći tio estas la ideala opcio se vi intencas uzi vian\n"
-#~ " komputilon ćefe por ćiutaga uzado će la oficejo aý hejme.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Programado: se vi intencas uzi vian komputilon ćefe por programado,\n"
-#~ " ći tio estas bona opcio. Vi havos plenan aron de programiloj por\n"
-#~ " kompili, erarserći, formati programfontojn, kaj krei\n"
-#~ " programpakaźojn.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servilo: se vi intencas uzi ći tiun komputilon kiel servilo, ći tio\n"
-#~ " estas bona opcio. Aý dosierservilo (NFS aý SMB), printservilo\n"
-#~ " (Uniksa stilo aý Mikrosofta Vindoza stilo), aýtentikada servilo\n"
-#~ " (NIS), aý datumbaza servilo, ktp. Kiel tia, ne atendu umojn (KDE,\n"
-#~ " GNOME, ktp.) estas instalotaj."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Nun vi povas elekti la pakaźaron kiun vi deziras instali aý promocii.\n"
-#~ "\n"
-#~ "Tiam DrakX kontrolos ću vi havas sufiće da spaco por instali ćiujn de "
-#~ "ili.\n"
-#~ "Se ne, ři informas vin pir ři. Se vi deziras antaýeniri malgraýe, ři\n"
-#~ "antaýeniros je la instalado de ćiuj de la elektitaj pakaźaroj sed lasos\n"
-#~ "fali iujn pakaźojn kiujn estas malpli interesaj. Suben de la listo vi\n"
-#~ "povas elekti la opcion \"Elektado de apartaj pakaźoj\"; ćiokaze vi devus\n"
-#~ "foliumi tra pli ol 1000 pakaźoj..."
-
-#, fuzzy
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se vi havas ćiujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-#~ "Se vi havas neniujn de ći tiuj KDROM-oj, klaku \"Nuligu\".\n"
-#~ "Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku "
-#~ "\"Jes\"."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Nun vi povas enigi telefon-konektajn opciojn. Se vi ne estas certa kio "
-#~ "enigi,\n"
-#~ "vi povas havigi la řustan informon de via interretprovizanto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ " * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ " You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ " ask your network administrator.\n"
-#~ "\n"
-#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ " \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Enigu:\n"
-#~ "\n"
-#~ " - IP-adreson: Se vi ne scias, demandu al via retadministranto.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Retmaskon: \"255.255.255.0\" řenerale estas bona elektaźo. Se vi ne\n"
-#~ "estas certa, demandu al via retadministranto aý interretprovizanto.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Aýtomata IP-adreson: Se via reto uzas BOOTP-an aý DHCP-an "
-#~ "protokolon,\n"
-#~ "elektu ći tiun opcion. Se elektita, neniu valoro estas bezonata en\n"
-#~ "\"IP-adreson\". Se vi ne estas certa, demandu al via retadministranto\n"
-#~ "aý interretprovizanto.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Se via reto uzas NIS, elektu \"Uzu NIS\". Se vi ne scias, demandu al "
-#~ "via\n"
-#~ "retadministranto."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Nun vi povas enigi telefon-konektajn opciojn. Se vi ne estas certa kio "
-#~ "enigi,\n"
-#~ "vi povas havigi la řustan informon de via interretprovizanto."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se vi uzos prokurajn servilojn, bonvolu konfiguri ilin nune. Se vi ne\n"
-#~ "scias ću vi uzos prokurajn servilojn, demandu al via retadministranto aý\n"
-#~ "interretprovizanto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Vi povas instali kriptografian pakaźon se via interreta konekto estas "
-#~ "řuste\n"
-#~ "pretigita. Unue elektu spegulon de kie vi deziras elţuti pakaźojn kaj "
-#~ "poste\n"
-#~ "elektu la pakaźojn por instali.\n"
-#~ "\n"
-#~ "Notu ke vi devas elekti spegulon kaj kriptografiajn pakaźojn laý la "
-#~ "leřdonoj\n"
-#~ "de via lando."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Nun vi povas enigi la \"root\" (radiko) pasvorto por via Linuks-"
-#~ "Mandrejka\n"
-#~ "sistemo. Vi devas enigi la pasvorton dufoje por konfirmi ke ambaý fojoj\n"
-#~ "estas identaj.\n"
-#~ "\n"
-#~ "\n"
-#~ "La \"root\"-a uzanto estas la administranto de la sistemo, kaj estas la "
-#~ "sola\n"
-#~ "uzanto permesata ţanři la sisteman konfiguraźon. Tial, elektu ći tiun\n"
-#~ "pasvorton zorge! Nepermesata uzado de la \"root\"-a uzanto povas esti\n"
-#~ "treege danřera al la sistema integreco kaj dateno, kaj al aliaj sistemoj\n"
-#~ "konektata al ři. La pasvorto devus esti miksaźo de literciferaj signoj "
-#~ "kaj\n"
-#~ "almenaý 8 signoj longa. *Neniam* surpaperigu řin. Tamen, ne elektu tro\n"
-#~ "longan aý komplikan pasvorton: vi devas povi memori řin sen tro multe da\n"
-#~ "peno."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Nun vi povas krei unu aý pli \"ordinara(j)\" uzanto(j), male al la\n"
-#~ "\"privilegia\" uzanto, \"root\". Vi povas krei unu aý pli uzanto(j) por\n"
-#~ "ćiu persono vi deziras permesi uzi la komputilon. Notu ke ćiu uzanto\n"
-#~ "havos viajn proprajn preferojn (grafikan medion, programajn aranřojn,\n"
-#~ "ktp.) kaj řian propran \"hejman dosierujon\", kie ći tiuj preferoj estas\n"
-#~ "konservata.\n"
-#~ "\n"
-#~ "\n"
-#~ "Antaý ćio, krei uzanton por vi mem! Eć se vi estos la sola uzulo će la\n"
-#~ "komputilo, vi ne devus konekti kiel \"root\" por ćiutaga uzado de la\n"
-#~ "sistemo: ři estas tre alta sekureca risko. Fari la sistemon neuzebla\n"
-#~ "estas oftege nur unu misklavo fora.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tial, vi devus konekti al la sistemo per ordinara uzanto vi kreos ći "
-#~ "tie,\n"
-#~ "kaj saluti kiel \"root\" nur por administraj kaj flegadaj kialoj."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO kaj Grub ćefaj opcioj estas:\n"
-#~ " - Startaparato: Fiksas la nomon de la aparato (ekz-e subdisko de "
-#~ "fiksdisko)\n"
-#~ "tiu enhavas la startsektoron. Krom se vi scias specife alie, elektu\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Prokrastoperiodo antaý starti defaýltan sistemon: Elektas la nombron\n"
-#~ "da dekonoj de sekundo ke la startţargilo devus atendi antaý starti la\n"
-#~ "unuan sistemon. Ći tiu utilas će sistemoj kiuj tuj startas de la\n"
-#~ "fiksdisko malantaý ili ebligas la klavaron. La startţargilo ne atendas "
-#~ "se\n"
-#~ "\"delay\" (prokrastoperiodo) estas ellasita aý estas fiksita al nul.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Grafika reřimo: Ći tiu specifas la VGA tekstan reřimon por uzi dum\n"
-#~ "start. La sekvantaj valoroj estas uzeblaj:\n"
-#~ " * normala: elektu normalan 80 per 25 tekstan reřimon.\n"
-#~ " * <numero>: uzu la respondan tekstan reřimon."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO estas startţargilo por Sparc: ři povas starti aý Linukson aý iun "
-#~ "ajn\n"
-#~ "mastruman sistemon ćeestanta će via komputilo. Normale, ći tiuj aliaj\n"
-#~ "mastrumaj sistemoj estas řuste detektata kaj instalada. Se tiel ne "
-#~ "estas,\n"
-#~ "vi povas aldoni enskribon mane per ći tiu ekrano. Zorgu elekti la "
-#~ "řustajn\n"
-#~ "parametrojn.\n"
-#~ "\n"
-#~ "\n"
-#~ "Eble vi ankaý ne deziras doni atingon al ći tiuj aliaj mastrumaj "
-#~ "sistemoj\n"
-#~ "al iu ajn. Ćiokaze vi povas forstreki la respondajn enskribojn. Sed\n"
-#~ "ćiokaze, vi bezonos startdiskon por starti ilin!"
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ " - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO ćefaj opcioj estas:\n"
-#~ " - Instalado de Startţargilo: Indiki kie vi deziras meti la informon\n"
-#~ "bezonata por start GNU/Linukso. Krom se vi scias specife kion vi faras,\n"
-#~ "elektu \"Unua sektoro de drajvo (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Prokrastoperiodo antaý starti defaýltan sistemon: Elektas la nombron\n"
-#~ "da dekonoj de sekundo ke la startţargilo devus atendi antaý starti la\n"
-#~ "unuan sistemon. Ći tiu utilas će sistemoj kiuj tuj startas de la\n"
-#~ "fiksdisko malantaý ili ebligas la klavaron. La startţargilo ne atendas "
-#~ "se\n"
-#~ "\"delay\" (prokrastoperiodo) estas ellasita aý estas fiksita al nul."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Nun estas tempo por konfiguri la X Fenestra Sistemo, kiu estas la kerno\n"
-#~ "de la GNU/Linuksa GUI (Grafika UzulInterfaco). Por tiu celo, vi devas\n"
-#~ "konfiguri vian grafikan karton kaj ekranon. La plejparto de ći tiuj "
-#~ "paţoj\n"
-#~ "estas aýtomatitaj, tamen, do via laboro eble konsistos en konfirmi kion\n"
-#~ "estis farata kaj akcepti la aranřojn. :)\n"
-#~ "\n"
-#~ "\n"
-#~ "Kiam la konfigurado estas kompleta, X lanćiřos (krom se vi demandas al\n"
-#~ "DrakX ne fari tion) pro ke vi kontrolu řin la observu se la aranřojn\n"
-#~ "taýgas por vi. Se ne, vi povas reveni kaj ţanři ilin, tiom da tempoj "
-#~ "kiom\n"
-#~ "estas necesa."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se iu misas en la X-a konfiguraźo, uzu ći tiujn opciojn por řuste "
-#~ "konfiguri\n"
-#~ "la X Fenestran Sistemon."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se vi preferas uzi grafikan saluton, elektu \"Jes\". Aliokaze, elektu "
-#~ "\"Ne\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Via sistemo restartos.\n"
-#~ "\n"
-#~ "Post restartado, via nova Linuks-Mandrejka sistemo ţargiřos aýtomate. Se "
-#~ "vi\n"
-#~ "deziras starti en alian ekzistanta mastruman sistemon, bonvole legu la\n"
-#~ "pluan instrukcion."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Ćeśa (Programistoj)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaka (Programistoj)"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Skribu /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatu ćion"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Post formatado de ćiuj subdisko,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "ćiuj datenoj sur tiuj subdisko estos perdata"
-
-#~ msgid "Reload"
-#~ msgstr "Reţargu"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Ću vi deziras krei aýtoinstalan disketon por replikado de Linukso?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL Konfiguraźo"
-
-#, fuzzy
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-#~ "ći tie; printiloj estos aýtomate dektektataj. Se vi havas dubojn,\n"
-#~ "elektu \"Malproksima CUPS servilo\"."
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Malproksima printvico"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domajna nomo"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Neniu printilo"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "ISDN-a Konfiguraźon"
-
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "muntado malsukcesis: "
-
-#~ msgid "Sending Speed:"
-#~ msgstr "Sendrapideco: "
-
-#~ msgid "Receiving Speed:"
-#~ msgstr "Ricevrapideco: "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Speco de konekto"
-
-#~ msgid "Connecting to Internet "
-#~ msgstr "Konektas al la Interreto"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Malkonektas el la Interreto"
-
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Malkonektado el la Interreto malsukcesis."
-
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Malkonektado el la Interreto finis."
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Nomo de konekto"
-
-#~ msgid "sent: "
-#~ msgstr "sendita(j): "
-
-#~ msgid "received: "
-#~ msgstr "ricevita(j): "
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Defaýlta"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Mi ne povas kompreni la enhavon de la konfigurodosiero."
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptilo"
-
-#, fuzzy
-#~ msgid "Disable network"
-#~ msgstr "Malebligu"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Ebligu"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Konfiguru interretan konektaźon"
-
-#~ msgid "Choose"
-#~ msgstr "Elektu"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Vi povas specifi rekte la URI por atingi la printilon per CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jes, printu Askian provpařon"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jes, printu PostSkriban provpařon"
-
-#~ msgid "Paper Size"
-#~ msgstr "Papergrandeco"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Elźetu pařon post tasko?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Uniprint-aj pelilaj opcioj"
-
-#~ msgid "Color depth options"
-#~ msgstr "Kolorprofunecaj opcioj"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Printu tekston kiel PostScripto?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Riparu ţtuparan tekston?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Nombro de pařoj en eliga pařo"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr ""
-#~ "Dekstra/Maldrekstra marřenoj en punktoj (1/72 de colo, proksimume 1/3 mm)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr ""
-#~ "Supra/Malsupra marřenoj en punktoj (1/72 de colo, proksimume 1/3 mm)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Aldonaj GhostScript-aj opcioj"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Aldonaj Tekstaj opcioj"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inversigu ordon de pařoj"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Elektu Malproksiman Printilan Konekton"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Ćiuj printilo bezonas nomon (ekzemple lp).\n"
-#~ "Aliaj parametroj, ekzemple la priskribon de la printilo aý řian lokon\n"
-#~ "vi povas difini. Kiu nomo devus uzata por ći tiu printilo kaj kiel\n"
-#~ "ři estas konektata?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Ćiuj printvico (al kiu printajn taskojn estas direktata) bezonas nomon\n"
-#~ "(ofte lp) kaj fonan eneligan dosierujon asociata kun ři. Kiu nomo kaj\n"
-#~ "dosierujo devus uzata por ći tiu printvico?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nomo de printvico"
-
-#~ msgid "Spool directory"
-#~ msgstr "Fona eneliga dosierujo"
diff --git a/perl-install/share/po/es.po b/perl-install/share/po/es.po
deleted file mode 100644
index fb6f837b3..000000000
--- a/perl-install/share/po/es.po
+++ /dev/null
@@ -1,12570 +0,0 @@
-# Translation file (spanish) of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 1999-2000
-# Fabian Mandelbaum <fabman@mandrakesoft.com>, 2000, 2001, 2002
-# Juan Manuel GarcĂ­a Molina <juanma_gm@wanadoo.es>, 2000-2002
-# Carlos SĂĄnchez <vcbsaorc@vc.ehu.es>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-15 10:34-0300\n"
-"Last-Translator: Fabian Mandelbaum <fabman@mandrakesoft.com>\n"
-"Language-Team: Spanish <cooker-i18n@linux-mandrake.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurar los monitores independientemente"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Usar extensiĂłn Xinerama"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurar sĂłlo la tarjeta \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "ConfiguraciĂłn multi-monitor"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Su sistema soporta configuraciĂłn multi-monitor.\n"
-"ÂżQuĂŠ desea hacer?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Tarjeta grĂĄfica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccione una tarjeta grĂĄfica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Elija un servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Elija un controlador X"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "Controlador X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ÂżQuĂŠ tipo de configuraciĂłn de XFree desea tener?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta puede admitir aceleraciĂłn 3D pero sĂłlo con XFree %s.\n"
-"XFree %s admite su tarjeta y puede tener mejor comportamiento en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Su tarjeta puede admitir aceleraciĂłn 3D por hardware con XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleraciĂłn 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Su tarjeta puede admitir aceleraciĂłn 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleraciĂłn 3D EXPERIMENTAL por hardware"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Su tarjeta sĂłlo puede admitir aceleraciĂłn de 3D por hardware con XFree %s,\n"
-"ADVIERTA QUE ESTO ES EXPERIMENTAL Y PUEDE COLGAR SU ORDENADOR.\n"
-"XFree %s admite su tarjeta y puede tener un mejor comportamiento en 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalaciĂłn del controlador de la pantalla)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "ConfiguraciĂłn de XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione la cantidad de memoria de su tarjeta grĂĄfica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Elija las opciones para el servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Elija un monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Los dos parĂĄmetros crĂ­ticos son la frecuencia de barrido vertical, que "
-"indica la frecuencia\n"
-"a la cual se refresca la pantalla entera, y mĂĄs importante aĂşn, la "
-"frecuencia de sincronizaciĂłn\n"
-"horizontal, la cual es la frecuencia de las lĂ­neas de barrido horizontal.\n"
-"\n"
-"Es MUY IMPORTANTE que no especifique un tipo de monitor con una\n"
-"frecuencia de sincronizaciĂłn superior a la capacidad real de su monitor:\n"
-"puede daĂąar su monitor.\n"
-" En caso de duda, elija una configuraciĂłn conservadora."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de barrido horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de barrido vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "El monitor no estĂĄ configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "La tarjeta grĂĄfica todavĂ­a no estĂĄ configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "AĂşn no ha elegido las resoluciones"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "ÂżDesea probar la configuraciĂłn?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Advertencia: probar con esta tarjeta de vĂ­deo puede colgar su ordenador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Probar la configuraciĂłn"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"intente cambiar algunos parĂĄmetros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "OcurriĂł un error:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saliendo en %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "ÂżEs ĂŠsta la configuraciĂłn correcta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "OcurriĂł un error, intente cambiar algunos parĂĄmetros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "ResoluciĂłn"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Elija la resoluciĂłn y la profundidad de colores"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Tarjeta grĂĄfica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "MĂĄs"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo experto"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mostrar todo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluciones"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "DistribuciĂłn del teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de ratĂłn: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo del ratĂłn: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical del monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Tarjeta grĂĄfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "IdentificaciĂłn de la tarjeta grĂĄfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria de la tarjeta grĂĄfica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidad de color: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "ResoluciĂłn: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparando la configuraciĂłn de X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "ÂżQuĂŠ desea hacer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Cambiar el monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Cambiar la tarjeta grĂĄfica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Cambiar las opciones del servidor X"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Cambiar la resoluciĂłn"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar informaciĂłn"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Probar de nuevo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Salir"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"ÂżConservar los cambios?\n"
-"La configuraciĂłn actual es:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X al arrancar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Puede configurar su computadora para que inicie X automĂĄticamente\n"
-"al arrancar. ÂżDesea que se lance X cuando reinicie?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Abra de nuevo una sesiĂłn %s para activar los cambios"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Por favor salga de la sesiĂłn y luego pulse Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 colores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil colores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil colores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millones de colores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 billones de colores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB o mĂĄs"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estĂĄndar, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrelazado (sin 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelazado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA extendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA no-entrelazado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta-frecuencia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor multi-frecuencia que soporta 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor que soporta 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor que soporta 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primer sector de la particiĂłn de arranque"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector del disco (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "InstalaciĂłn de SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "ÂżDĂłnde quiere instalar el cargador de arranque?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "InstalaciĂłn de LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO con menĂş de texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO con menĂş grĂĄfico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrancar desde DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opciones principales del cargador de arranque"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Cargador de arranque a usar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "InstalaciĂłn del cargador de arranque"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de arranque"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (no funciona con BIOS antiguos)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de vĂ­deo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Demora antes de arrancar la imagen predeterminada"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "ContraseĂąa"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "ContraseĂąa (de nuevo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restringir las opciones de la lĂ­nea de comandos"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restringir"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Limpiar /tmp en cada inicio del equipo"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precise el tamaĂąo de la RAM si es necesario (se encontraron %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activar perfiles mĂşltiples"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Proporcione el tamaĂąo de la RAM en MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"La opciĂłn \"Restringir las opciones de la lĂ­nea de comandos\"\n"
-"no tiene sentido sin contraseĂąa"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Vuelva a intentarlo, por favor"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Las contraseĂąas no coinciden"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensaje de inicio"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Demora de open firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Tiempo de espera de arranque del nĂşcleo"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "ÂżHabilitar el arranque desde CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "ÂżHabilitar el arranque de OF?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "ÂżSO predeterminado?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"DecidiĂł instalar el cargador de arranque en una particiĂłn.\n"
-"Esto implica que ya tiene un cargador de arranque en el disco desde el que "
-"arranca (ej: System Commander).\n"
-"\n"
-"ÂżDesde quĂŠ disco arranca?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"AquĂ­ estĂĄn las diferentes entradas.\n"
-"Puede aĂąadir otras o cambiar las que ya existen."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "AĂąadir"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Hecho"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "ÂżQuĂŠ tipo de entrada desea aĂąadir?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Otro SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Otro SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Otro SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imagen"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "RaĂ­z"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "AĂąadir"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lectura/Escritura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabla"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Por defecto"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "TamaĂąo de initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Quitar entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "No se admite una etiqueta vacĂ­a"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Debe especificar una imĂĄgen del nĂşcleo"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Debe especificar una particiĂłn raĂ­z"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Esta etiqueta ya estĂĄ en uso"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s encontradas"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "ÂżTiene alguna otra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "ÂżTiene alguna interfaz %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "No"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "SĂ­"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ver informaciĂłn sobre el hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando controlador para la tarjeta %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(mĂłdulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ÂżQuĂŠ controlador de %s debo probar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"En algunos casos, el controlador de %s necesita informaciĂłn extra\n"
-"para funcionar correctamente, aunque normalmente funcione sin ella.\n"
-"ÂżDesea especificar informaciĂłn extra para el controlador o dejar que el "
-"mismo\n"
-"pruebe su equipo y encuentre la informaciĂłn que necesita? A veces,\n"
-"el probar el equipo puede provocar que ĂŠste se cuelgue, pero no deberĂ­a\n"
-"causar ningĂşn daĂąo."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "AutodetecciĂłn"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar las opciones"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Ahora puede proporcionar las opciones al mĂłdulo %s.\n"
-"Note que cualquier direcciĂłn debe ingresarse con el prefijo 0x como '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"AquĂ­ deben ir las diferentes opciones para el mĂłdulo %s.\n"
-"Las opciones son de la forma \"nombre=valor nombre2=valor2 ...\".\n"
-"Por ejemplo, \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opciones de los mĂłdulos:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Error al cargar el mĂłdulo %s.\n"
-"ÂżDesea intentarlo de nuevo con otros parĂĄmetros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "acceso a programas X"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "acceso a herramientas rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "permitir \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "acceso a archivos administrativos"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s ya fue aĂąadido)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Esta contraseĂąa es demasiado sencilla"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Introduzca el nombre de usuario"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"El nombre de usuario (login) sĂłlo debe contener letras, nĂşmeros, `-' y `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Este nombre de usuario ya fue aĂąadido"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "AĂąadir un usuario"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduzca un usuario\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceptar el usuario"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nombre y apellidos"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nombre del usuario"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icono"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Entrada automĂĄtica"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Puede configurar su computadora para que entre automĂĄticamente\n"
-"en sesiĂłn con un usuario dado al arrancar. ÂżDesea esa funcionalidad?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Elija el usuario predeterminado:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Elija el gestor de ventanas a ejecutar:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Por favor, elija el idioma a usar."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Puede elegir otros idiomas, que estarĂĄn disponibles despuĂŠs de la instalaciĂłn"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Todo"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Permitir a todos los usuarios"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizada"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "No compartir"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Se necesita instalar el paquete %s. ÂżQuiere instalarlo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Puede exportar usando NFS o Samba. ÂżCuĂĄl elige"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Falta el paquete obligatorio %s"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"ÂżDesea permitir a los usuarios exportar algunos directorios personales?\n"
-"Si lo hace, los usuarios podrĂĄn simplemente hacer clic sobre \"Compartir\" en konqueror y nautilus.\n"
-"\n"
-"\"Personalizar\" permite una granularidad por usuario.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Lanzar userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"La comparticiĂłn por usuario utiliza el grupo \"fileshare\". \n"
-"Puede utilizar userdrake para aĂąadir un usuario a este grupo."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bienvenidos, crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "EstĂĄndar"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alta"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "MĂĄs alta"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoica"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nivel se debe usar con mucho cuidado. Hace su sistema mĂĄs simple de\n"
-"usar, pero tambiĂŠn mucho mĂĄs vulnerable: no debe usarse para una mĂĄquina\n"
-"conectada en red con otras o a Internet. No hay contraseĂąas de acceso."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Las contraseĂąas estĂĄn activadas, pero tampoco se recomienda usar este\n"
-"nivel para un ordenador conectado a una red."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Éste es el nivel de seguridad estándar recomendado para una máquina que se\n"
-"utilizarĂĄ para conectarse a la Internet como cliente."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Ya hay algunas restricciones, y todas las noches se corren mĂĄs "
-"verificaciones automĂĄticas."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Con este nivel de seguridad, es posible utilizar el sistema como un "
-"servidor.\n"
-"La seguridad es lo suficientemente alta como para usar el sistema como un\n"
-"servidor que acepte conexiones de mĂşltiples clientes. Nota: si su mĂĄquina "
-"sĂłlo es un cliente en la Internet, mejor deberĂ­a elegir un nivel inferior."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Basado en el nivel anterior, pero el sistema estĂĄ completamente cerrado.\n"
-"Las caracterĂ­sticas de seguridad estĂĄn al mĂĄximo."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Elegir el nivel de seguridad"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Nivel de seguridad"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Utilizar libsafe para los servidores"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Una biblioteca que le defiende ante ataques de desbordamiento de bĂşfer y "
-"ataques con cadenas de formato."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"ÂĄBienvenido a %s, el selector de SO de arranque!\n"
-"\n"
-"Elija un sistema operativo de la lista o espere %d segundos\n"
-"para que arranque el sistema predeterminado.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "ÂĄBienvenido a GRUB, el selector de SO de arranque!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use las teclas %c y %c para seleccionar una entrada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pulse intro para iniciar el SO elegido, pulse 'e' para editar"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "los comandos antes de iniciar, o pulse 'c' para una linea de comandos."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Se va a iniciar la entrada resaltada en %d segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "no hay espacio suficiente en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Escritorio"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "MenĂş inicio"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "No puede instalar el cargador de arranque en una particiĂłn %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "todavĂ­a no estĂĄ implementada la ayuda.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "ConfiguraciĂłn del estilo de arranque"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Archivo"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Archivo/_Salir"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>S"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Monitor categorizante de estilo nuevo"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Monitor de estilo nuevo"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitor tradicional"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monitor tradicional Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Iniciar Aurora en el momento del arranque"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Modo de Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Modo de Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"En este momento estĂĄ usando %s como gestor de arranque.\n"
-"Haga click sobre configurar para lanzar el asistente de configuraciĂłn."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurar"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Modo del sistema"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lanzar el sistema X-Window al comenzar"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "No, no deseo entrada automĂĄtica"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "SĂ­, deseo entrada automĂĄtica con este (usuario, escritorio)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Aceptar"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ÂĄno se puede abrir /etc/inittab para lectura: %s !"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "No se pueden realizar instantĂĄneas de pantalla antes del particionado"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"Luego de la instalaciĂłn estarĂĄn disponibles las instantĂĄneas de pantalla en %"
-"s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "BĂŠlgica"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "RepĂşblica Checa"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemania"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grecia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Noruega"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suecia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Holanda"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Estados Unidos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Por favor, haga primero una copia de seguridad de sus datos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "ÂĄLea con cuidado!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si piensa usar aboot, no olvide dejar espacio libre (2048 sectores es\n"
-"suficiente) al principio del disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Error"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Asistente"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Elija una acciĂłn"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tiene una particiĂłn FAT de gran tamaĂąo\n"
-"(generalmente usada por DOS/Windows de MicroSoft).\n"
-"Le sugiero que primero cambie el tamaĂąo de la misma\n"
-"(para eso haga clic sobre ella, y luego sobre \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Por favor, haga clic sobre una particiĂłn"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalles"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Sistema de. archivos. con journal"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Intercambio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "VacĂ­o"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Otros"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sistemas de archivos:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crear"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use \"%s\" en su lugar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Borrar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use \"Desmontar\" primero"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Se perderĂĄn todos los datos de la particiĂłn %s despuĂŠs de cambiar su tipo"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Elija una particiĂłn"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Elija otra particiĂłn"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Salir"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Cambiar al modo experto"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Cambiar al modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Deshacer"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "ÂżSeguir adelante?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Salir sin grabar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "ÂżSalir del programa sin grabar la tabla de particiones?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "ÂżDesea guardar las modificaciones en /etc/fstab?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "AsignaciĂłn automĂĄtica"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Borrar todas"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "InformaciĂłn del disco rĂ­gido"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Todas las particiones primarias estĂĄn usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "No se pueden agregar mĂĄs particiones"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Por favor, para tener mĂĄs particiones borre alguna para poder crear una "
-"particiĂłn extendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Guardar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Restaurar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Rescatar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Volver a cargar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Montaje automĂĄtico de dispositivos extraĂ­bles"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Elija un archivo"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La tabla de particiones de respaldo no tiene\n"
-"el mismo tamaĂąo. ÂżDesea continuar de todas formas?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advertencia"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Inserte un disquete en la unidad\n"
-"Se perderĂĄn todos los datos del disquete"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tratando de rescatar la tabla de particiones"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "InformaciĂłn detallada"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punto de montaje"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opciones"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Desplazar"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatear"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "AĂąadir al RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "AĂąadir al LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Quitar del RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Quitar del LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar el RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crear una particiĂłn nueva"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector de comienzo: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "TamaĂąo en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo de sistema de. archivos: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punto de montaje: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "ÂżBorrar el archivo de loopback?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Cambiar el tipo de particiĂłn"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "ÂżQuĂŠ sistema de archivos desea?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Cambiando de ext2 a ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "ÂżDonde desea montar el archivo de loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ÂżDĂłnde desea montar el dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"No se puede deseleccionar el punto de montaje ya que esta particiĂłn\n"
-"se usa para un montaje en loopback.\n"
-"Quite el montaje de loopback primero"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando los lĂ­mites del sistema de archivos FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta particiĂłn no es redimensionable"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"DeberĂ­a hacer una copia de seguridad de todos los datos de esta particiĂłn"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Se perderĂĄn todos los datos de la particiĂłn %s tras cambiar su tamaĂąo"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Eligiendo el tamaĂąo nuevo"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "TamaĂąo nuevo en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "ÂżA quĂŠ disco desea desplazarla?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "ÂżA quĂŠ sector desea desplazarla?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Desplazando"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Desplazando una particiĂłn..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Elegir un RAID existente al que aĂąadir"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nuevo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Elegir un LVM existente al que aĂąadir"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Âżnombre de LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Esta particiĂłn no puede usarse para el loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nombre del archivo de loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Indique el nombre de un archivo"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"El archivo ya lo utiliza otro dispositivo loopback.\n"
-"Elija otro archivo, por favor"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "El archivo ya existe. ÂżDesea usarlo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opciones de montaje"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Varios"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tamaĂąo de los bloques"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Cuidado: esta operaciĂłn es peligrosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "ÂżQuĂŠ tipo de particionamiento?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Disculpe, pero no se permite la creaciĂłn de una particiĂłn /boot tan lejos\n"
-"en el disco (en un cilindro > 1024). Puede usar lilo LILO (y es probable "
-"que\n"
-"no funcione), o bien no utiliza LILO (y entonces no necesita /boot)"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"La particiĂłn que escogiĂł para usar como raĂ­z (/) estĂĄ fĂ­sicamente ubicada\n"
-"despuĂŠs del 1024Âş cilindro del disco rĂ­gido, y no tiene particiĂłn /boot.\n"
-"Si piensa usar el cargador de arranque LILO, tenga en cuenta que tiene\n"
-"que aĂąadir una particiĂłn /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"EligiĂł una particiĂłn RAID en software como particiĂłn raĂ­z (/).\n"
-"NingĂşn cargador de arranque es capaz de manejarlo sin una particiĂłn /boot.\n"
-"AsĂ­ que tenga en cuenta que tiene que aĂąadir una particiĂłn /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ÂĄSe escribirĂĄ al disco la tabla de particiones de la unidad %s!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Necesita reiniciar el equipo para que la modificaciĂłn tenga efecto"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Se perderĂĄn todos los datos de la particiĂłn %s despuĂŠs de formatearla"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formateando"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formateando el archivo de loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formateando la particiĂłn %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Ocultar archivos"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Mover los archivos a la nueva particiĂłn"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"El directorio %s ya tiene algunos datos\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Moviendo los archivos a la nueva particiĂłn"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copiando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Borrando %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la particiĂłn %s ahora se conoce como %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra DOS: %s (simplemente una adivinanza)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nombre: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Comienzo: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "TamaĂąo: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindros %d a %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formateado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "No formateado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Archivo(s) de loopback:\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"ParticiĂłn predeterminada de arranque\n"
-" (para arranque de MS-DOS, no para lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "TamaĂąo de los bloques %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos-RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nombre del archivo de loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Es probable que esta particiĂłn sea\n"
-"una particiĂłn de Controlador, probablemente\n"
-"deberĂ­a dejarla como estĂĄ.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Esta particiĂłn especial de Bootstrap\n"
-"es para el arranque\n"
-"dual de su sistema.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "TamaĂąo: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "GeometrĂ­a: %s cilindros, %s cabezas, %s sectores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos-LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de la tabla de particiones: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "en el bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opciones: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Clave de cifrado del sistema de archivos"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Elija la clave de cifrado de su sistema de archivos"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Esta clave de cifrado es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Las claves de cifrado no coinciden"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Clave de cifrado"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Clave de cifrado (otra vez)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Cambiar tipo"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Por favor, haga clic sobre un medio"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Buscar servidores"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formateo de %s fallĂł"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "No sĂŠ cĂłmo formatear %s en el tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "fallĂł el montaje de la particiĂłn %s en el directorio %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck fallĂł con cĂłdigo de salida %d o seĂąal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "error desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "con /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "No se puede usar JFS para particiones menores de 32MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "No se puede usar ReiserFS para particiones menores de 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Los puntos de montaje deben comenzar con una /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ya existe una particiĂłn con el punto de montaje %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "No puede usar un Volumen LĂłgico LVM para el punto de montaje %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio deberĂ­a permanecer dentro del sistema de archivos raĂ­z"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necesita un sistema de archivos verdadero (ext2, reiserfs) para este punto "
-"de montaje\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"No puede usar un sistema de archivos cifrado para el punto de montaje %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "No hay espacio libre suficiente para la asignaciĂłn automĂĄtica"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nada para hacer"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Error al abrir %s para escribir: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"OcurriĂł un error - no se encontrĂł ningĂşn dispositivo vĂĄlido para crear los "
-"nuevos sistemas de archivos. Por favor, verifique su equipo para saber la "
-"razĂłn de este fallo"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "ÂĄNo tiene ninguna particiĂłn!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux es un sistema multiusuario, y esto significa que cada usuario\n"
-"puede tener sus preferencias propias, sus archivos propios, y asĂ­\n"
-"sucesivamente. Puede leer la \"GuĂ­a del Usuario\" para aprender mĂĄs. Pero,\n"
-"a diferencia de \"root\", que es el administrador, los usuarios que agregue\n"
-"aquĂ­ no podrĂĄn cambiar nada excepto su configuraciĂłn y sus archivos\n"
-"propios. TendrĂĄ que crear al menos un usuario no privilegiado para Usted\n"
-"mismo. Esa cuenta es donde deberĂ­a conectarse para el uso diario. Aunque es\n"
-"muy prĂĄctico ingresar como \"root\" diariamente, ÂĄtambiĂŠn puede ser muy\n"
-"peligroso! El error mĂĄs leve podrĂ­a significar que su sistema deje de\n"
-"funcionar. Si comete un error serio como usuario no privilegiado, sĂłlo\n"
-"puede llegar a perder algo de informaciĂłn, pero no todo el sistema.\n"
-"\n"
-"Primero tendrĂĄ que ingresar su nombre real. Esto no es obligatorio, por\n"
-"supuesto ya que, en realidad, puede ingresar lo que desee. DrakX tomarĂĄ\n"
-"entonces la primer palabra que ingresĂł y la copiarĂĄ al campo \"Nombre de\n"
-"usuario\". Este es el nombre que este usuario en particular usarĂĄ para\n"
-"ingresar al sistema. Lo puede cambiar. Luego tendrĂĄ que ingresar una\n"
-"contraseĂąa aquĂ­. La contraseĂąa de un usuario no privilegiado (regular) no\n"
-"es tan crucial como la de \"root\" desde el punto de vista de la seguridad,\n"
-"pero esto no es razĂłn alguna para obviarla - despuĂŠs de todo, son sus\n"
-"archivos los que estĂĄn en riesgo.\n"
-"\n"
-"Si hace clic sobre \"Aceptar usuario\", entonces puede agregar tantos como\n"
-"desee. Agregue un usuario para cada uno de sus amigos: por ejemplo su padre\n"
-"o su hermana. Cuando haya terminado de agregar todos los usuarios que\n"
-"desee, seleccione \"Hecho\".\n"
-"\n"
-"Hacer clic sobre el botĂłn \"Avanzadas\" le permite cambiar el \"shell\"\n"
-"predeterminado para ese usuario (bash por defecto)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Arriba se listan las particiones Linux existentes que se detectaron en su\n"
-"disco rĂ­gido. Puede mantener las elecciones hechas por el asistente, las\n"
-"mismas son buenas para las instalaciones mĂĄs comunes. Si hace cambios, al\n"
-"menos debe definir una particiĂłn raĂ­z (\"/\"). No elija una particiĂłn muy\n"
-"pequeĂąa o no podrĂĄ instalar software suficiente. Si desea almacenar sus\n"
-"datos en una particiĂłn separada, tambiĂŠn puede necesitar crear una\n"
-"particiĂłn para \"/home\" (sĂłlo es posible si tiene mĂĄs de una particiĂłn\n"
-"Linux disponible).\n"
-"\n"
-"Cada particiĂłn se lista como sigue: \"Nombre\", \"Capacidad\".\n"
-"\n"
-"\"Nombre\" estĂĄ estructurado: \"tipo de disco rĂ­gido\", \"nĂşmero de disco\n"
-"rĂ­gido\", \"nĂşmero de particiĂłn\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rĂ­gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"NĂşmero de disco rĂ­gido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rĂ­gido maestro en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"b\" significa \"disco rĂ­gido esclavo en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"c\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"La instalaciĂłn Mandrake Linux se divide en varios CD-ROMs. DrakX sabe si un\n"
-"paquete seleccionado se encuentra en otro CD y expulsarĂĄ el CD corriente y\n"
-"le pedirĂĄ que inserte uno diferente cuando sea necesario."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Ahora es el momento de especificar los programas que desea instalar en su\n"
-"sistema. Hay miles de paquetes disponibles para Mandrake Linux, y no se\n"
-"supone que los conozca a todos de memoria.\n"
-"\n"
-"Si estĂĄ realizando una instalaciĂłn estĂĄndar desde un CD-ROM, primero se le\n"
-"pedirĂĄ que especifique los CDs que tiene (sĂłlo en modo Experto). Verifique\n"
-"las etiquetas de los CDs y marque las casillas que corresponden a los que\n"
-"tiene disponibles para la instalaciĂłn. Haga clic sobre \"Aceptar\" cuando\n"
-"estĂŠ listo para continuar.\n"
-"\n"
-"Los paquetes se ordenan en grupos que corresponden a un uso particular de\n"
-"su mĂĄquina. Los grupos en sĂ­ mismos estĂĄn clasificados en cuatro secciones:\n"
-"\n"
-" * \"EstaciĂłn de trabajo\": si planea utilizar su mĂĄquina como una estaciĂłn\n"
-"de trabajo, seleccione uno o mĂĄs grupos correspondientes.\n"
-"\n"
-" * \"Desarrollo\": si la mĂĄquina se utilizarĂĄ para programaciĂłn, elija\n"
-"el(los) grupo(s) deseado(s).\n"
-"\n"
-" * \"Servidor\": finalmente, si se pretende usar la mĂĄquina como un "
-"servidor\n"
-"aquĂ­ puede seleccionar los servicios mĂĄs comunes que desea que se instalen\n"
-"en la misma.\n"
-"\n"
-" * \"Entorno grĂĄfico\": seleccione aquĂ­ su entorno grĂĄfico preferido. Si\n"
-"desea tener una estaciĂłn de trabajo grĂĄfica, ÂĄseleccione al menos uno!\n"
-"\n"
-"Si mueve el cursor del ratĂłn sobre el nombre de un grupo se mostrarĂĄ un\n"
-"pequeĂąo texto explicativo acerca de ese grupo. Si deselecciona todos los\n"
-"grupos cuando estĂĄ realizando una instalaciĂłn regular (es decir, no una\n"
-"actualizaciĂłn), aparecerĂĄ un diĂĄlogo que propone opciones diferentes para\n"
-"una instalaciĂłn mĂ­nima:\n"
-"\n"
-" * \"Con X\": instala la menor cantidad de paquetes posible para tener un\n"
-"escritorio grĂĄfico que funcione;\n"
-"\n"
-" * \"Con documentaciĂłn bĂĄsica\": instala el sistema base mĂĄs algunos\n"
-"utilitarios bĂĄsicos y la documentaciĂłn de los mismos. Esta instalaciĂłn es\n"
-"adecuada para configurar un servidor;\n"
-"\n"
-" * \"InstalaciĂłn realmente mĂ­nima\": instalarĂĄ el mĂ­nimo necesario estricto\n"
-"para obtener un sistema Linux que funciona, sĂłlo en lĂ­nea de comandos. Esta\n"
-"instalaciĂłn ocupa alrededor de 65Mb.\n"
-"\n"
-"Puede marcar la opciĂłn \"SelecciĂłn por paquetes individuales\" que es Ăştil\n"
-"si estĂĄ familiarizado con los paquetes que se ofrecen o si desea tener un\n"
-"control total sobre lo que se instalarĂĄ.\n"
-"\n"
-"Si iniciĂł la instalaciĂłn en el modo \"ActualizaciĂłn\", puede deseleccionar\n"
-"todos los grupos para evitar instalar cualquier paquete nuevo. Esto es Ăştil\n"
-"para reparar o actualizar un sistema existente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalmente, dependiendo de si Usted elige seleccionar los paquetes\n"
-"individuales o no, se le presentarĂĄ un ĂĄrbol que contiene todos los\n"
-"paquetes clasificados por grupos y sub-grupos. Mientras navega por el\n"
-"ĂĄrbol, puede seleccionar grupos enteros, sub-grupos, o simplemente\n"
-"paquetes.\n"
-"\n"
-"Tan pronto como selecciona un paquete en el ĂĄrbol, aparece una descripciĂłn\n"
-"del mismo sobre la derecha. Cuando ha finalizado con su selecciĂłn, haga\n"
-"clic sobre el botĂłn \"Instalar\" que lanzarĂĄ el proceso de instalaciĂłn.\n"
-"Dependiendo de la velocidad de su hardware y de la cantidad de paquetes que\n"
-"se deben instalar, el proceso puede tardar un rato en completarse. En la\n"
-"pantalla se muestra una estimaciĂłn del tiempo necesario para completar la\n"
-"instalaciĂłn para ayudarlo a considerar si tiene tiempo suficiente par\n"
-"disfrutar una taza de cafĂŠ.\n"
-"\n"
-"!! Si ha sido seleccionado un paquete de servidor ya sea intencionalmente o\n"
-"porque era parte de un grupo completo, se le pedirĂĄ que confirme que\n"
-"realmente desea que se instalen esos servidores. Bajo Mandrake Linux,\n"
-"cualquier servidor instalado se inicia de manera predeterminada al momento\n"
-"del arranque. Aunque estos son seguros y no tienen problemas conocidos al\n"
-"momento en que se publicĂł la distribuciĂłn, puede ocurrir que mĂĄs tarde se\n"
-"descubran vulnerabilidades en la seguridad. En particular, si no sabe que\n"
-"es lo que se supone que hace un servicio o la razĂłn por la cual se estĂĄ\n"
-"instalando, entonces haga clic sobre \"No\". Si hace clic sobre \"SĂ­\" se\n"
-"instalarĂĄn todos los servicios listados y de manera predeterminada los\n"
-"mismos arrancarĂĄn automĂĄticamente. !!\n"
-"\n"
-"La opciĂłn \"Dependencias automĂĄticas\" simplemente deshabilita el diĂĄlogo\n"
-"de advertencia cuando el instalador selecciona automĂĄticamente un paquete.\n"
-"Esto ocurre porque se determina que es necesario para satisfacer una\n"
-"dependencia con otro paquete para poder completar la instalaciĂłn\n"
-"satisfactoriamente.\n"
-"\n"
-"El pequeĂąo icono del disquete al final de la lista le permite cargar la\n"
-"lista de paquetes elegida durante una instalaciĂłn previa. Haga clic sobre\n"
-"este icono y se le pedirĂĄ que inserte un disquete creado con anterioridad\n"
-"al final de otra instalaciĂłn. Vea el segundo consejo del Ăşltimo paso para\n"
-"informaciĂłn sobre como crear dicho disquete."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Ahora se le propone configurar su conexiĂłn de red/Internet. Si desea\n"
-"conectar su computadora a la Internet o a una red de ĂĄrea local, haga clic\n"
-"sobre \"Aceptar\". Se lanzarĂĄ la detecciĂłn automĂĄtica de dispositivos de\n"
-"red y mĂłdems. Si esta detecciĂłn falla, quite la marca de la casilla \"Usar\n"
-"detecciĂłn automĂĄtica\" la prĂłxima vez. TambiĂŠn puede elegir no configurar\n"
-"la red, o hacerlo mĂĄs tarde; en ese caso simplemente haga clic sobre el\n"
-"botĂłn \"Cancelar\".\n"
-"\n"
-"Los tipos de conexiĂłn disponibles son: mĂłdem tradicional, mĂłdem RDSI\n"
-"(ISDN), conexiĂłn ADSL, cable mĂłdem, y finalmente una simple conexiĂłn LAN\n"
-"(Ethernet).\n"
-"\n"
-"AquĂ­ no entraremos en detalle en cada configuraciĂłn. Simplemente debe\n"
-"asegurarse que su Proveedor de Servicios de Internet o su administrador del\n"
-"sistema le proporcionaron todos los parĂĄmetros de configuraciĂłn.\n"
-"\n"
-"Puede consultar el capĂ­tulo de \"GuĂ­a del Usuario\" sobre las conexiones a\n"
-"la Internet para detalles acerca de la configuraciĂłn, o simplemente esperar\n"
-"hasta que su sistema estĂŠ instalado y usar el programa que se describe aquĂ­\n"
-"para configurar su conexiĂłn.\n"
-"\n"
-"Si desea configurar la red mĂĄs tarde, luego de la instalaciĂłn, o si ha\n"
-"finalizado de configurar su conexiĂłn de red, haga clic sobre \"Cancelar\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Ahora puede elegir los servicios que desea iniciar durante el arranque.\n"
-"\n"
-"AquĂ­ se presentan todos los servicios disponibles con la instalaciĂłn\n"
-"corriente. Debe revisarlos con cuidado y quitar la marca de aquellos que no\n"
-"siempre son necesarios al arrancar.\n"
-"\n"
-"Puede obtener un pequeĂąo texto explicativo acerca de un servicio\n"
-"seleccionando un servicio especĂ­fico. Sin embargo, si no estĂĄ seguro si un\n"
-"servicio es Ăştil o no, es mĂĄs seguro dejar el comportamiento\n"
-"predeterminado.\n"
-"\n"
-"!! Tenga mucho cuidado en esta etapa si pretende usar su mĂĄquina como un\n"
-"servidor: probablemente no desearĂĄ arrancar servicios que no necesita. Por\n"
-"favor recuerde que varios servicios pueden ser peligrosos si se habilitan\n"
-"en un servidor. En general, seleccione sĂłlo aquellos servicios que\n"
-"realmente necesita. !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux administra la hora en GMT (\"Greenwich Mean Time\", Hora del\n"
-"Meridiano de Greenwich) y la traduce a la hora local de acuerdo al huso\n"
-"horario que Usted seleccionĂł. Sin embargo, es posible desactivar esto\n"
-"quitando la marca de la casilla \"Reloj interno puesto a GMT\" de forma tal\n"
-"que el reloj de hardware es el mismo que el del sistema. Esto es Ăştil\n"
-"cuando la mĂĄquina alberga otro sistema operativo como Windows.\n"
-"\n"
-"La opciĂłn \"SincronizaciĂłn automĂĄtica de hora (usando NTP)\" regularĂĄ\n"
-"automĂĄticamente el reloj conectĂĄndose a un servidor remoto de la hora en la\n"
-"Internet. Elija un servidor ubicado cerca suyo en la lista que se presenta.\n"
-"Por supuesto debe tener una conexiĂłn con la Internet funcionando para que\n"
-"esta caracterĂ­stica funcione. La misma instalarĂĄ en su mĂĄquina un servidor\n"
-"de la hora que, opcionalmente, puede ser utilizado por otras mĂĄquinas en su\n"
-"red local."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (por X Window System) es el corazĂłn de la interfaz grĂĄfica de GNU/Linux\n"
-"en el que se apoyan todos los entornos grĂĄficos (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) que se incluyen con Mandrake Linux. En esta secciĂłn,\n"
-"DrakX intentarĂĄ configurar a X automĂĄticamente.\n"
-"\n"
-"Es extremadamente raro que esto falle, a menos que el hardware sea muy\n"
-"antiguo (o muy nuevo). Si no falla, arrancarĂĄ X automĂĄticamente con la\n"
-"mejor resoluciĂłn posible dependiendo del tamaĂąo de su monitor. Luego\n"
-"aparecerĂĄ una ventana que le pregunta si la puede ver.\n"
-"\n"
-"Si estĂĄ haciendo una instalaciĂłn en modo \"Experto\", ingresarĂĄ al\n"
-"asistente de configuraciĂłn de X. Para mĂĄs informaciĂłn sobre este asistente\n"
-"vea la secciĂłn correspondiente del manual.\n"
-"\n"
-"Si puede ver el mensaje y responde \"SĂ­\", entonces DrakX continuarĂĄ con el\n"
-"paso siguiente. Si no puede ver el mensaje, simplemente significa que la\n"
-"configuraciĂłn no era la correcta y la prueba terminarĂĄ automĂĄticamente\n"
-"luego de 10 segundos, restaurando la pantalla."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"La primera vez que intenta la configuraciĂłn de X Usted puede no estar muy\n"
-"satisfecho con el resultado (la pantalla es muy pequeĂąa, estĂĄ corrida hacia\n"
-"la izquierda o hacia la derecha...). Es por esto que, incluso si X arranca\n"
-"correctamente, DrakX le preguntarĂĄ si la configuraciĂłn le conviene. TambiĂŠn\n"
-"propondrĂĄ cambiarla mostrando una lista de modos vĂĄlidos que pudo\n"
-"encontrar, y le pedirĂĄ que seleccione alguno.\n"
-"\n"
-"Como Ăşltimo recurso, si todavĂ­a no puede hacer que X funcione, elija\n"
-"\"Cambiar la tarjeta grĂĄfica\", seleccione \"Tarjeta no listada\", y cuando\n"
-"se le pregunte acerca de que servidor desea elija \"FBDev\". Esta es una\n"
-"opciĂłn a prueba de fallos que funciona con cualquier tarjeta grĂĄfica\n"
-"moderna. Luego elija \"Probar nuevamente\" para estar seguro que funciona."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalmente, se le preguntarĂĄ si desea ver la interfaz grĂĄfica en el\n"
-"arranque. Note que esta pregunta se le formula incluso si eligiĂł no probar\n"
-"la configuraciĂłn. Obviamente, querrĂĄ responder \"No\" si su mĂĄquina va a\n"
-"actuar como un servidor, o si no tuvo ĂŠxito con la configuraciĂłn de la\n"
-"pantalla."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"El CD-ROM de Mandrake Linux tiene un modo de rescate incorporado. Usted\n"
-"puede acceder al mismo arrancando desde el CD-ROM, presionando la tecla\n"
-">>F1<< durante el arranque y tecleando >>rescue<< en el prompt. Pero en\n"
-"caso que su computadora no pueda arrancar desde el CD-ROM, Usted deberĂ­a\n"
-"recurrir a este paso al menos en dos situaciones:\n"
-"\n"
-" * cuando instala el cargador de arranque, DrakX sobreescribirĂĄ el sector "
-"de\n"
-"arranque (MBR) de su disco principal (a menos que estĂŠ utilizando otro\n"
-"administrador de arranque) de forma tal que pueda iniciar o bien Windows o\n"
-"bien GNU/Linux (asumiendo que tiene Windows en su sistema). Si necesita\n"
-"volver a instalar Windows, el proceso de instalaciĂłn de Microsoft\n"
-"sobreescribirĂĄ el sector de arranque, y entonces ÂĄUsted no podrĂĄ iniciar\n"
-"GNU/Linux!\n"
-"\n"
-" * si surge un problema y Usted no puede iniciar GNU/Linux desde el disco\n"
-"rĂ­gido, este disquete serĂĄ la Ăşnica manera de iniciar GNU/Linux. El mismo\n"
-"contiene una buena cantidad de herramientas del sistema para restaurar un\n"
-"sistema que colapsĂł debido a una falla de energĂ­a, un error de tecleo\n"
-"infortunado, un error en una contraseĂąa, o cualquier otro motivo.\n"
-"\n"
-"Cuando haga clic sobre este paso se le pedirĂĄ que inserte un disquete\n"
-"dentro de la disquetera. El disquete que insertarĂĄ debe estar vacĂ­o o\n"
-"contener datos que no necesite. No tendrĂĄ que formatearlo ya que DrakX\n"
-"sobreescribirĂĄ el disquete por completo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Ahora necesita elegir el lugar de su disco rĂ­gido donde se instalarĂĄ su\n"
-"sistema operativo Mandrake Linux. Si su disco rĂ­gido estĂĄ vacĂ­o o si un\n"
-"sistema operativo existente estĂĄ utilizando todo el espacio disponible,\n"
-"necesitarĂĄ particionar el disco. BĂĄsicamente, particionar un disco rĂ­gido\n"
-"consiste en dividirlo lĂłgicamente para crear espacio para instalar su\n"
-"sistema Mandrake Linux nuevo.\n"
-"\n"
-"Debido a que los efectos del particionado por lo general son irreversibles,\n"
-"el particionado puede ser intimidante y estresante si Usted es un usuario\n"
-"inexperto. Por fortuna, hay un asistente que simplifica este proceso. Antes\n"
-"de comenzar, por favor consulte el manual y tĂłmese su tiempo.\n"
-"\n"
-"Si estĂĄ corriendo la instalaciĂłn en modo Experto, ingresarĂĄ a DiskDrake, la\n"
-"herramienta de particionado de Mandrake Linux, que le permite un ajuste\n"
-"fino de sus particiones. Vea la secciĂłn DiskDrake en la \"GuĂ­a del\n"
-"Usuario\". Desde la interfaz de instalaciĂłn, puede utilizar los asistentes\n"
-"como se describe aquĂ­ haciendo clic sobre el botĂłn \"Asistente\" del\n"
-"diĂĄlogo.\n"
-"\n"
-"Si ya se han definido particiones, ya sea de una instalaciĂłn previa o por\n"
-"medio de otra herramienta de particionado, simplemente seleccione esas para\n"
-"instalar su sistema Linux.\n"
-"\n"
-"Si no hay particiones definidas, necesitarĂĄ crearlas usando el asistente.\n"
-"Dependiendo de la configuraciĂłn de su disco rĂ­gido, estĂĄn disponibles\n"
-"varias opciones:\n"
-"\n"
-" * \"Usar espacio libre\": esta opciĂłn simplemente llevarĂĄ a un "
-"particionado\n"
-"automĂĄtico de su(s) disco(s) vacĂ­o(s). No se le pedirĂĄn mĂĄs detalles ni se\n"
-"le formularĂĄn mĂĄs preguntas.\n"
-"\n"
-" * \"Usar particiĂłn existente\": el asistente ha detectado una o mĂĄs\n"
-"particiones Linux existentes en su disco rĂ­gido. Si desea utilizarlas,\n"
-"elija esta opciĂłn.\n"
-"\n"
-" * \"Usar el espacio libre en la particiĂłn Windows\": si MicrosoftWindows\n"
-"estĂĄ instalado en su disco rĂ­gido y ocupa todo el espacio disponible en el\n"
-"mismo, Usted tiene que liberar espacio para los datos de Linux. Para\n"
-"hacerlo, puede borrar su particiĂłn y datos MicrosoftWindows (vea las\n"
-"soluciones \"Borrar el disco completo\" o \"Modo experto\") o cambie el\n"
-"tamaĂąo de su particiĂłn Windows. El cambio de tamaĂąo se puede realizar sin\n"
-"la pĂŠrdida de datos, siempre y cuando Usted ha desfragmentado con\n"
-"anterioridad la particiĂłn Windows. TambiĂŠn se recomienda hacer una copia de\n"
-"respaldo de sus datos.. Se recomienda esta soluciĂłn si desea utilizar tanto\n"
-"Mandrake Linux como MicrosoftWindows en la misma computadora.\n"
-"\n"
-" Antes de elegir esta opciĂłn, por favor comprenda que despuĂŠs de este\n"
-"procedimiento, el tamaĂąo de su particiĂłn MicrosoftWindows serĂĄ mĂĄs pequeĂąo\n"
-"que ahora. TendrĂĄ menos espacio bajo MicrosoftWindows para almacenar sus\n"
-"datos o instalar software nuevo.\n"
-"\n"
-" * \"Borrar el disco entero\": si desea borrar todos los datos y todas las\n"
-"particiones presentes en su disco rĂ­gido y reemplazarlas con su nuevo\n"
-"sistema Mandrake Linux, elija esta opciĂłn. Tenga cuidado con esta soluciĂłn\n"
-"ya que no podrĂĄ revertir su elecciĂłn despuĂŠs de confirmarla.\n"
-"\n"
-" !! Si elige esta opciĂłn, se perderĂĄn todos los datos en su disco. !!\n"
-"\n"
-" * \"Quitar Windows\": simplemente esto borrarĂĄ todo en el disco y "
-"comenzarĂĄ\n"
-"particionando todo desde cero. Se perderĂĄn todos los datos en su disco.\n"
-"\n"
-" !! Si elige esta opciĂłn, se perderĂĄn todos los datos en su disco. !!\n"
-"\n"
-" * \"Modo experto\": elija esta opciĂłn si desea particionar manualmente su\n"
-"disco rĂ­gido. Tenga cuidado - esta es una elecciĂłn potente pero peligrosa.\n"
-"Puede perder todos sus datos con facilidad. Por lo tanto, no elija esta\n"
-"opciĂłn a menos que sepa lo que estĂĄ haciendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"AquĂ­ tiene. Ahora la instalaciĂłn estĂĄ completa y su sistema GNU/Linux estĂĄ\n"
-"listo para ser utilizado. Simplemente haga clic sobre \"Aceptar\" para\n"
-"volver a arrancar el sistema. Puede iniciar GNU/Linux o Windows, cualquiera\n"
-"que prefiera (si estĂĄ usando el arranque dual) tan pronto como su mĂĄquina\n"
-"haya vuelto a arrancar.\n"
-"\n"
-"El botĂłn \"Avanzadas\" (sĂłlo en modo Experto) le muestra dos botones mĂĄs\n"
-"para:\n"
-"\n"
-" * \"Generar un disquete de instalaciĂłn automĂĄtica\": para crear un "
-"disquete\n"
-"de instalaciĂłn que realizarĂĄ una instalaciĂłn completa sin la asistencia de\n"
-"un operador, similar a la instalaciĂłn que ha configurado reciĂŠn.\n"
-"\n"
-" Note que hay dos opciones diferentes disponibles despuĂŠs de hacer clic\n"
-"sobre el botĂłn:\n"
-"\n"
-" * \"Reproducir\". Esta es una instalaciĂłn parcialmente automatizada ya "
-"que\n"
-"la etapa de particionado (y sĂłlo esta etapa) permanece interactiva.\n"
-"\n"
-" * \"Automatizada\". InstalaciĂłn completamente automatizada: el disco "
-"rĂ­gido\n"
-"se sobreescribe por completo, y se pierden todos los datos.\n"
-"\n"
-" Esta caracterĂ­stica es muy Ăştil cuando se instala una cantidad grande de\n"
-"mĂĄquinas similares. Vea la secciĂłn Auto install (en inglĂŠs) en nuestro\n"
-"sitio web.\n"
-"\n"
-" * \"Guardar selecciĂłn de paquetes\"(*): guarda la selecciĂłn de paquetes\n"
-"como se hizo con anterioridad. Luego, cuando haga otra instalaciĂłn, inserte\n"
-"el disquete en la disquetera y ejecute la instalaciĂłn yendo a la pantalla\n"
-"de ayuda con [F1], e ingrese >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Necesita un disquete formateado con FAT (para crear uno bajo GNU/Linux\n"
-"teclee \"mformat a:\")"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Se debe formatear cualquier particiĂłn nueva que ha sido definida para que\n"
-"se pueda utilizar (formatear significa crear un sistema de archivos).\n"
-"\n"
-"Puede desear volver a formatear algunas particiones ya existentes para\n"
-"borrar cualquier dato que pudieran contener. Si asĂ­ lo desea, por favor\n"
-"seleccione tambiĂŠn dichas particiones.\n"
-"\n"
-"Por favor note que no es necesario volver a formatear todas las particiones\n"
-"pre-existentes. Debe volver a formatear las particiones que contienen el\n"
-"sistema operativo (tales como \"/\", \"/usr\" o \"/var\") pero no tiene que\n"
-"volver a formatear particiones que contienen datos que desea preservar\n"
-"(tĂ­picamente \"/home\").\n"
-"\n"
-"Tenga sumo cuidado cuando selecciona las particiones. DespuĂŠs de formatear,\n"
-"se borrarĂĄn todos los datos en las particiones seleccionadas y no podrĂĄ\n"
-"recuperarlos en absoluto.\n"
-"\n"
-"Haga clic sobre \"Aceptar\" cuando estĂŠ listo para formatear las\n"
-"particiones.\n"
-"\n"
-"Haga clic sobre \"Cancelar\" si desea elegir otra particiĂłn para la\n"
-"instalaciĂłn de su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Haga clic sobre \"Avanzado\" si desea seleccionar las particiones en las\n"
-"que se buscarĂĄn bloques defectuosos en el disco."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"En este momento se estĂĄ instalando su sistema operativo Mandrake Linux\n"
-"nuevo. Dependiendo de la cantidad de paquetes que instalarĂĄ y de la\n"
-"velocidad de su computadora, esta operaciĂłn puede tomar desde unos pocos\n"
-"minutos hasta una cantidad de tiempo significativa.\n"
-"\n"
-"Por favor, tenga paciencia."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Puede ser que cuando estĂĄ instalando Mandrake Linux algunos paquetes se\n"
-"hayan actualizado desde la publicaciĂłn inicial. Se pueden haber corregido\n"
-"algunos errores, y solucionado problemas de seguridad. Para permitir que\n"
-"Usted se beneficie de estas actualizaciones, ahora se le propone\n"
-"transferirlas desde la Internet. Elija \"SĂ­\" si tiene funcionando una\n"
-"conexiĂłn con la Internet, o \"No\" si prefiere instalar los paquetes\n"
-"actualizados mĂĄs tarde.\n"
-"\n"
-"Si elije \"SĂ­\" se muestra una lista de lugares desde los que se pueden\n"
-"obtener las actualizaciones. Elija el mĂĄs cercano a Usted. Luego aparece un\n"
-"ĂĄrbol de selecciĂłn de paquetes: revise la selecciĂłn y presione \"Instalar\"\n"
-"para transferir e instalar los paquetes seleccionados, o \"Cancelar\" para\n"
-"abortar."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Antes de continuar, deberĂ­a leer cuidadosamente los tĂŠrminos de la\n"
-"licencia. Los mismos cubren a toda la distribuciĂłn Mandrake Linux, y si\n"
-"Usted no estĂĄ de acuerdo con todos los tĂŠrminos en la misma, haga clic\n"
-"sobre el botĂłn \"Rechazar\". Esto terminarĂĄ la instalaciĂłn inmediatamente.\n"
-"Para continuar con la instalaciĂłn, haga clic sobre el botĂłn \"Aceptar\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"En este punto, es tiempo de elegir el nivel de seguridad deseado para su\n"
-"mĂĄquina. Como regla general, cuanto mĂĄs expuesta estĂĄ la mĂĄquina, y cuantos\n"
-"mĂĄs cruciales sean los datos que tenga almacenados el nivel de seguridad en\n"
-"la misma deberĂĄ ser mĂĄs alto. Sin embargo, un nivel de seguridad mĂĄs alto\n"
-"generalmente se obtiene a expensas de la facilidad de uso. Consulte el\n"
-"capĂ­tulo \"msec\" del \"Manual de Referencia\" para obtener mĂĄs informaciĂłn\n"
-"sobre el significado de dichos niveles.\n"
-"\n"
-"Si no sabe que elegir, mantenga la opciĂłn predeterminada."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ahora necesita elegir quĂŠ particiones se utilizarĂĄn para la instalaciĂłn de\n"
-"su sistema Mandrake Linux. Si las particiones ya han sido definidas, ya sea\n"
-"por una instalaciĂłn previa de GNU/Linux o con otra herramienta de\n"
-"particionado, puede utilizarlas. En caso contrario se deben definir\n"
-"particiones en el disco rĂ­gido.\n"
-"\n"
-"Para crear particiones, primero debe seleccionar un disco rĂ­gido. Puede\n"
-"seleccionar el disco a particionar haciendo clic sobre \"hda\" para el\n"
-"primer disco IDE, \"hdb\" para el segundo, \"sda\" para el primer disco\n"
-"SCSI y asĂ­ sucesivamente.\n"
-"\n"
-"Para particionar el disco rĂ­gido seleccionado, puede utilizar estas\n"
-"opciones:\n"
-"\n"
-" * \"Borrar todo\": esta opciĂłn borra todas las particiones sobre el disco\n"
-"seleccionado.\n"
-"\n"
-" * \"AsignaciĂłn automĂĄtica\": esta opciĂłn le permite crear particiones\n"
-"\"Ext2\" y swap automĂĄticamente en el espacio libre de su disco rĂ­gido.\n"
-"\n"
-" * \"Rescatar tabla de particiones\": si su tabla de particiones estĂĄ\n"
-"daĂąada, puede intentar recuperarla usando esta opciĂłn. Por favor, tenga\n"
-"cuidado y recuerde que puede fallar.\n"
-"\n"
-" * \"MĂĄs\": le da acceso a caracterĂ­sticas adicionales:\n"
-"\n"
-" * \"Guardar tabla de particiones\": guarda la tabla de particiones en "
-"un\n"
-"disquete. Útil para recuperar la tabla de particiones más adelante en caso\n"
-"que sea necesario. Es altamente recomendable realizar este paso.\n"
-"\n"
-" * \"Recuperar tabla de particiones\": esta opciĂłn le permitirĂĄ "
-"restaurar\n"
-"una tabla de particiones guardada previamente en un disquete.\n"
-"\n"
-" * \"Rescatar tabla de particiones\": si su tabla de particiones estĂĄ "
-"daĂąada\n"
-"puede intentar recuperarla utilizando esta opciĂłn. Por favor, tenga cuidado\n"
-"y recuerde que puede fallar.\n"
-"\n"
-" * \"Volver a cargar\": descarta todos los cambios y carga su tabla de\n"
-"particiones inicial.\n"
-"\n"
-" * \"Montaje automĂĄtico de soportes removibles\": si desmarca esta "
-"opciĂłn\n"
-"los usuarios estarĂĄn forzados a montar y desmontar manualmente los soportes\n"
-"removibles como los disquetes y los CD-ROMs.\n"
-"\n"
-" * \"Asistente\": use esta opciĂłn si desea utilizar un asistente para\n"
-"particionar su disco rĂ­gido. Se recomienda esto si no tiene un buen\n"
-"conocimiento del particionado.\n"
-"\n"
-" * \"Deshacer\": use esta opciĂłn para cancelar sus cambios.\n"
-"\n"
-" * \"Cambiar a modo normal/experto\": permite realizar acciones adicionales\n"
-"sobre las particiones (tipo, opciones, formatear) y brinda mĂĄs informaciĂłn.\n"
-"\n"
-" * \"Hecho\": cuando ha terminado de particionar su disco rĂ­gido, esto\n"
-"guardarĂĄ sus cambios en el disco.\n"
-"\n"
-"Nota: todas las opciones son accesibles por medio del teclado. Navegue a\n"
-"travĂŠs de las particiones usando [Tab] y las flechas [Arriba/Abajo].\n"
-"\n"
-"Cuando se selecciona una particiĂłn, puede utilizar:\n"
-"\n"
-" * Ctrl-c para crear una particiĂłn nueva (cuando estĂĄ seleccionada una\n"
-"particiĂłn vacĂ­a);\n"
-"\n"
-" * Ctrl-d para borrar una particiĂłn;\n"
-"\n"
-" * Ctrl-m para configurar el punto de montaje.\n"
-"\n"
-"Para obtener informaciĂłn sobre los distintos tipos de sistemas de archivos\n"
-"disponibles, por favor lea el capĂ­tulo acerca de ext2fs del \"Manual de\n"
-"Referencia\".\n"
-"\n"
-"Si estĂĄ instalando en una mĂĄquina PPC, querrĂĄ crear una pequeĂąa particiĂłn\n"
-"HFS de \"bootstrap\" de al menos 1MB que serĂĄ utilizada por el cargador de\n"
-"arranque yaboot. Si opta por hacer la particiĂłn un poco mĂĄs grande, digamos\n"
-"50 MB, puede ver que es un lugar Ăştil para almacenar un nĂşcleo y ramdisk\n"
-"alternativos para arrancar en situaciones de emergencia."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Se ha detectado mĂĄs de una particiĂłn MicrosoftWindows en su disco rĂ­gido.\n"
-"Por favor, elija aquella a la cual desea cambiarle el tamaĂąo para poder\n"
-"instalar su sistema operativo Mandrake Linux nuevo.\n"
-"\n"
-"Cada particiĂłn se lista como sigue: \"Nombre Linux\", \"Nombre Windows\"\n"
-"\"Capacidad\".\n"
-"\n"
-"\"Nombre Linux\" estĂĄ estructurado: \"tipo de disco rĂ­gido\", \"nĂşmero de\n"
-"disco rĂ­gido\", \"nĂşmero de particiĂłn\" (por ejemplo, \"hda1\").\n"
-"\n"
-"\"Tipo de disco rĂ­gido\" es \"hd\" si su disco es un disco IDE y \"sd\" si\n"
-"el mismo es un disco SCSI.\n"
-"\n"
-"\"NĂşmero de disco rĂ­gido\" siempre es una letra que sigue a \"hd\" o a\n"
-"\"sd\". Para los discos IDE:\n"
-"\n"
-" * \"a\" significa \"disco rĂ­gido maestro en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"b\" significa \"disco rĂ­gido esclavo en la controladora IDE primaria"
-"\",\n"
-"\n"
-" * \"c\" significa \"disco rĂ­gido maestro en la controladora IDE\n"
-"secundaria\",\n"
-"\n"
-" * \"d\" significa \"disco rĂ­gido esclavo en la controladora IDE\n"
-"secundaria\".\n"
-"\n"
-"Para los discos SCSI, una \"a\" significa \"SCSI ID menor\", una \"b\"\n"
-"significa \"segunda SCSI ID menor\", etc.\n"
-"\n"
-"\"Nombre Windows\" es la letra de su unidad de disco bajo Windows (el\n"
-"primer disco o particiĂłn se denomina \"C:\")."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor, tenga paciencia. Esta operaciĂłn puede tomar varios minutos."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX ahora necesita saber si desea realizar una instalaciĂłn por defecto\n"
-"(\"Recomendada\") o si desea tener un control mayor (\"Experto\"). TambiĂŠn\n"
-"puede elegir realizar una instalaciĂłn nueva o una actualizaciĂłn de un\n"
-"sistema Mandrake Linux existente:\n"
-"\n"
-" * \"Instalar\": el sistema anterior se borrarĂĄ por completo. De hecho,\n"
-"dependiendo de lo que su mĂĄquina contiene actualmente, podrĂĄ mantener\n"
-"algunas particiones antiguas (Linux u otras) sin cambios;\n"
-"\n"
-" * \"ActualizaciĂłn\": esta clase de instalaciĂłn le permite simplemente\n"
-"actualizar los paquetes que en este momento estĂĄn instalados en su sistema\n"
-"Mandrake Linux. La misma mantiene las particiones corrientes de sus discos\n"
-"asĂ­ como tambiĂŠn las configuraciones de usuarios. Todos los otros pasos de\n"
-"instalaciĂłn permanecen disponibles con respecto a la instalaciĂłn simple;\n"
-"\n"
-" * \"SĂłlo actualizar paquetes\": esta clase completamente nueva le permite\n"
-"actualizar un sistema Mandrake Linux existente a la vez que mantiene todas\n"
-"las configuraciones del sistema sin cambios. TambiĂŠn es posible aĂąadir\n"
-"paquetes nuevos a la instalaciĂłn corriente.\n"
-"\n"
-"Las actualizaciones deberĂ­an funcionar sin problemas para los sistemas\n"
-"Mandrake Linux comenzando desde la versiĂłn \"8.1\".\n"
-"\n"
-"Dependiendo de su conocimiento de GNU/Linux, por favor elija una de los\n"
-"opciones siguientes:\n"
-"\n"
-" * Recomendada: elija esta si nunca ha instalado un sistema operativo\n"
-"GNU/Linux. La instalaciĂłn serĂĄ muy fĂĄcil y sĂłlo se le formularĂĄn unas pocas\n"
-"preguntas;\n"
-"\n"
-" * Experto: si tiene un conocimiento bueno de GNU/Linux, puede elegir esta\n"
-"clase de instalaciĂłn. La instalaciĂłn experta le permitirĂĄ realizar una\n"
-"instalaciĂłn altamente personalizada. Contestar a algunas de las preguntas\n"
-"puede ser difĂ­cil si no tiene un buen conocimiento de GNU/Linux, entonces\n"
-"no elija esto a menos que sepa lo que estĂĄ haciendo."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalmente, DrakX selecciona el teclado adecuado para Usted (dependiendo\n"
-"del idioma que eligiĂł) y Usted ni siquiera verĂĄ este paso. Sin embargo,\n"
-"podrĂ­a no tener un teclado que se corresponde exactamente con su idioma:\n"
-"por ejemplo, si Usted es una persona hispano-parlante que estĂĄ en Argentina\n"
-"o MĂŠjico, su teclado serĂĄ un teclado Latinoamericano, pero si estĂĄ en\n"
-"EspaĂąa serĂĄ uno EspaĂąol. En ambos casos, Usted tendrĂĄ que volver a este\n"
-"paso de la instalaciĂłn y elegir un teclado apropiado de la lista.\n"
-"\n"
-"Haga clic sobre el botĂłn \"MĂĄs\" para que se le presente la lista completa\n"
-"de los teclados soportados."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Por favor, elija su idioma preferido para la instalaciĂłn y el uso del\n"
-"sistema.\n"
-"\n"
-"Al hacer clic sobre el botĂłn \"Avanzado\" podrĂĄ seleccionar otros idiomas\n"
-"para instalar en su estaciĂłn de trabajo. Seleccionar otros idiomas\n"
-"instalarĂĄ los archivos especĂ­ficos para la documentaciĂłn del sistema y las\n"
-"aplicaciones. Por ejemplo, si albergarĂĄ a gente de Francia en su mĂĄquina,\n"
-"seleccione EspaĂąol como idioma principal en la vista de ĂĄrbol y en la\n"
-"secciĂłn avanzada haga clic sobre la estrella gris que corresponde a\n"
-"\"FrancĂŠs|Francia\".\n"
-"\n"
-"Note que se pueden instalar mĂşltiples idiomas. Una vez que ha seleccionado\n"
-"cualquier idioma adicional haga clic sobre el botĂłn \"Aceptar\" para\n"
-"continuar."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX generalmente detecta la cantidad de botones que tiene su ratĂłn. Si\n"
-"no, asume que Usted tiene un ratĂłn de dos botones y lo configurarĂĄ para que\n"
-"emule el tercer botĂłn. DrakX sabrĂĄ automĂĄticamente si es un ratĂłn PS/2,\n"
-"serie o USB.\n"
-"\n"
-"Si desea especificar un tipo de ratĂłn diferente, seleccione el tipo\n"
-"apropiado de la lista que se proporciona.\n"
-"\n"
-"Si elije un ratĂłn distinto al predeterminado, se le presentarĂĄ una pantalla\n"
-"de prueba. Use los botones y la rueda para verificar que la configuraciĂłn\n"
-"es correcta. Si el ratĂłn no estĂĄ funcionando correctamente, presione la\n"
-"barra espaciadora o [Intro] para \"Cancelar\" y vuelva a elegir."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Por favor seleccione el puerto correcto. Por ejemplo, el puerto \"COM1\"\n"
-"bajo Windows se denomina \"ttyS0\" bajo GNU/Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Este es el punto de decisiĂłn mĂĄs crucial para la seguridad de su sistema\n"
-"GNU/Linux: tendrĂĄ que ingresar la contraseĂąa de \"root\". \"root\" es el\n"
-"administrador del sistema y es el Ăşnico autorizado a hacer actualizaciones,\n"
-"agregar usuarios, cambiar la configuraciĂłn general del sistema, etc.\n"
-"Resumiendo, ÂĄ\"root\" puede hacer de todo!. Es por esto que deberĂĄ elegir\n"
-"una contraseĂąa que sea difĂ­cil de adivinar DrakX le dirĂĄ si la que eligiĂł\n"
-"es demasiado fĂĄcil. Como puede ver, puede optar por no ingresar una\n"
-"contraseĂąa, pero le recomendamos encarecidamente que ingrese una, aunque\n"
-"sea sĂłlo por una razĂłn: no piense que debido a que Usted arrancĂł GNU/Linux,\n"
-"sus otros sistemas operativos estĂĄn seguros contra los errores. Eso no es\n"
-"cierto debido a que \"root\" puede sobrepasar todas las limitaciones y\n"
-"borrar, sin intenciĂłn, todos los datos que se encuentran en las particiones\n"
-"accediendo a las mismas sin el cuidado suficiente. Es por esto que es\n"
-"importante que sea difĂ­cil convertirse en \"root\".\n"
-"\n"
-"La contraseĂąa deberĂ­a ser una mezcla de caracteres alfanumĂŠricos y tener al\n"
-"menos una longitud de 8 caracteres. Nunca escriba la contraseĂąa de \"root\"\n"
-"eso hace que sea muy fĂĄcil comprometer a un sistema.\n"
-"\n"
-"Sin embargo, por favor no haga la contraseĂąa muy larga o complicada debido\n"
-"a que Usted debe poder recordarla sin realizar mucho esfuerzo.\n"
-"\n"
-"La contraseĂąa no se mostrarĂĄ en la pantalla a medida que Usted la teclee.\n"
-"Por lo tanto, tendrĂĄ que teclear la contraseĂąa dos veces para reducir la\n"
-"posibilidad de un error de tecleo. Si ocurre que Usted comete dos veces el\n"
-"mismo error de tecleo, tendrĂĄ que utilizar esta contraseĂąa \"incorrecta\"\n"
-"la primera vez que se conecte.\n"
-"\n"
-"En modo experto, se le preguntarĂĄ si se conectarĂĄ a un servidor de\n"
-"autenticaciĂłn, por ejemplo NIS o LDAP.\n"
-"\n"
-"Si su red usa el protocolo LDAP (o NIS) para la autenticaciĂłn, seleccione\n"
-"\"LDAP\" (o \"NIS\") como autenticaciĂłn. Si no sabe, pregunte al\n"
-"administrador de su red.\n"
-"\n"
-"Si su computadora no estĂĄ conectada a alguna red administrada, querrĂĄ\n"
-"elegir \"Archivos locales\" para la autenticaciĂłn."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO y grub son cargadores de arranque para GNU/Linux. Normalmente, esta\n"
-"etapa estĂĄ completamente automatizada. De hecho, DrakX analiza el sector de\n"
-"arranque del disco y actĂşa en funciĂłn de lo que encuentre allĂ­:\n"
-"\n"
-" * si encuentra un sector de arranque de Windows, lo reemplazarĂĄ con un\n"
-"sector de arranque de grub/LILO de forma tal que Usted pueda arrancar\n"
-"GNU/Linux u otro sistema operativo;\n"
-"\n"
-" * si encuentra un sector de arranque de grub o LILO, lo reemplazarĂĄ con "
-"uno\n"
-"nuevo;\n"
-"\n"
-"En caso de duda, DrakX mostrarĂĄ un diĂĄlogo con varias opciones.\n"
-"\n"
-" * \"Cargador de arranque a usar\": tiene tres opciones:\n"
-"\n"
-" * \"LILO con menĂş grĂĄfico\": si prefiere a LILO con su interfaz "
-"grĂĄfica.\n"
-"\n"
-" * \"GRUB\": si prefiere a grub (menĂş de texto).\n"
-"\n"
-" * \"LILO con menĂş de texto\": si prefiere a LILO con su interfaz de "
-"texto.\n"
-"\n"
-" * \"Dispositivo de arranque\": en la mayorĂ­a de los casos, no cambiarĂĄ lo\n"
-"predeterminado (\"/dev/hda\"), pero si lo prefiere, el cargador de arranque\n"
-"se puede instalar en el segundo disco rĂ­gido (\"/dev/hdb\"), o incluso en\n"
-"un disquete (\"/dev/fd0\").\n"
-"\n"
-" * \"Demora antes de arrancar la imagen predeterminada\": cuando vuelve a\n"
-"arrancar la computadora, esta es la demora que se garantiza al usuario para\n"
-"elegir en el menĂş del cargador de arranque, una entrada distinta a la\n"
-"predeterminada.\n"
-"\n"
-"!! Tenga presente que si no elige instalar un cargador de arranque\n"
-"(seleccionando \"Cancelar\"), ÂĄDebe asegurarse que tiene una forma de\n"
-"arrancar a su sistema Mandrake Linux! TambiĂŠn debe asegurarse que sabe lo\n"
-"que hace antes de cambiar cualquier opciĂłn. !!\n"
-"\n"
-"Haciendo clic sobre el botĂłn \"Avanzadas\" en este diĂĄlogo se le ofrecerĂĄn\n"
-"muchas opciones avanzadas que estĂĄn reservadas para el usuario experto.\n"
-"\n"
-"Luego que haya configurado los parĂĄmetros generales del cargador de\n"
-"arranque se mostrarĂĄ la lista de opciones de arranque que estarĂĄn\n"
-"disponibles al momento de arrancar.\n"
-"\n"
-"Si hay otro sistema operativo instalado en su mĂĄquina, se agregarĂĄ el mismo\n"
-"automĂĄticamente al menĂş de arranque. AquĂ­ puede elegir ajustar las opciones\n"
-"existentes. Seleccione una entrada y haga clic sobre \"Modificar\" para\n"
-"cambiar los parĂĄmetros de la misma o quitarla; \"AĂąadir\" crea una entrada\n"
-"nueva; y \"Hecho\" va al paso de instalaciĂłn siguiente."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (el LInux LOader) y grub son cargadores de arranque: permiten arrancar\n"
-"ya sea GNU/Linux como cualquier otro sistema operativo presente en su\n"
-"computadora. Normalmente, estos otros sistemas operativos se detectan e\n"
-"instalan correctamente. Si este no es el caso, puede aĂąadir una entrada a\n"
-"mano en esta pantalla. Tenga cuidado de elegir los parĂĄmetros correctos.\n"
-"\n"
-"TambiĂŠn puede no desear dar acceso a estos otros sistemas operativos a\n"
-"cualquiera. En ese caso, puede borrar las entradas correspondientes. Pero\n"
-"entonces, ÂĄnecesitarĂĄ un disquete de arranque para poder arrancar esos\n"
-"otros sistemas operativos!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Debe indicar donde desea colocar la informaciĂłn necesaria para arrancar en\n"
-"GNU/Linux.\n"
-"\n"
-"A menos que sepa exactamente lo que estĂĄ haciendo, elija \"Primer sector\n"
-"del disco (MBR)\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"AquĂ­ seleccionamos un sistema de impresiĂłn para que use su computadora.\n"
-"Otros sistemas operativos pueden ofrecerle uno, pero Mandrake Linux le\n"
-"ofrece tres.\n"
-"\n"
-" * \"pdq\"\"print, don't queue\" (imprimir sin poner en cola), es la\n"
-"elecciĂłn si Usted tiene una conexiĂłn directa a su impresora y desea evitar\n"
-"el pĂĄnico de los papeles trabados, y no tiene impresora en red alguna.\n"
-"ManejarĂĄ sĂłlo casos de red muy simples y es algo lento para las redes.\n"
-"Elija \"pdq\" si esta es su luna de miel con GNU/Linux. DespuĂŠs de la\n"
-"instalaciĂłn puede cambiar sus elecciones ejecutando PrinterDrake desde el\n"
-"Centro de Control Mandrake y eligiendo el modo experto.\n"
-"\n"
-" * \"CUPS\"\"Common Unix Printing System\" (Sistema de ImpresiĂłn ComĂşn de\n"
-"Unix) es excelente imprimiendo en su impresora local y tambiĂŠn en la otra\n"
-"punta del planeta. Es simple y puede actuar como servidor o cliente para el\n"
-"sistema de impresiĂłn antiguo \"lpd\", por lo que es compatible con los\n"
-"sistemas anteriores. Puede hacer muchas cosas, pero la configuraciĂłn bĂĄsica\n"
-"es tan simple como la de \"pdq\". Si necesita que emule a un servidor\n"
-"\"lpd\", debe encender el demonio \"cups-lpd\". Tiene interfaces grĂĄficas\n"
-"para imprimir o elegir las opciones de la impresora.\n"
-"\n"
-" * \"lprNG\"\"line printer daemon New Generation\" (servidor de impresora "
-"de\n"
-"lĂ­neas Nueva GeneraciĂłn). Este sistema puede hacer aproximadamente las\n"
-"mismas cosas que los otros, pero imprimirĂĄ en impresoras montadas sobre una\n"
-"red Novell, debido a que soporta el protocolo IPX, y puede imprimir\n"
-"directamente a comandos del shell. Si necesita Novell o imprimir a comandos\n"
-"de sin utilizar tuberĂ­as, utilice lprNG. De no ser asĂ­, se prefiere a CUPS\n"
-"ya que es mĂĄs simple y es mejor al trabajar sobre redes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX ahora detecta cualquier dispositivo IDE presente en su computadora.\n"
-"TambiĂŠn buscarĂĄ una o mĂĄs tarjetas SCSI PCI en su sistema. Si se encuentra\n"
-"una tarjeta SCSI DrakX instalarĂĄ el controlador apropiado automĂĄticamente.\n"
-"\n"
-"Debido a que la detecciĂłn de hardware a veces no detectarĂĄ alguna pieza de\n"
-"hardware DrakX le pedirĂĄ que confirme si tiene una tarjeta SCSI PCI. Haga\n"
-"clic sobre \"SĂ­\" si sabe que hay una tarjeta SCSI instalada en su mĂĄquina.\n"
-"Se le presentarĂĄ una lista de tarjetas SCSI de la cual elegir. Haga clic\n"
-"sobre \"No\" si no tiene hardware SCSI. Si no estĂĄ seguro puede verificar\n"
-"la lista de hardware detectado en su mĂĄquina seleccionando \"Ver\n"
-"informaciĂłn sobre el hardware\" y haciendo clic sobre \"Aceptar\". Examine\n"
-"la lista de hardware y luego haga clic sobre el botĂłn \"Aceptar\" para\n"
-"volver a la pregunta sobre la interfaz SCSI.\n"
-"\n"
-"Si tiene que seleccionar su adaptador manualmente, DrakX le preguntarĂĄ si\n"
-"desea especificar opciones para el mismo. DeberĂ­a permitir que DrakX sondee\n"
-"el hardware buscando las opciones especĂ­ficas que necesita el hardware para\n"
-"inicializarse. Por lo general esto funciona bien.\n"
-"\n"
-"Si DrakX no puede sondear las opciones que deben pasarse, necesitarĂĄ\n"
-"proporcionar manualmente las opciones al controlador. Por favor revise la\n"
-"\"GuĂ­a del Usuario\" (capĂ­tulo 3, secciĂłn \"Recopilando informaciĂłn acerca\n"
-"de su hardware\") en busca de consejos para recopilar los parĂĄmetros\n"
-"necesarios a partir de la documentaciĂłn del hardware, desde el sitio web\n"
-"del fabricante (si tiene acceso a la Internet) o desde MicrosoftWindows (si\n"
-"utilizaba este hardware con Windows en su sistema)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Puede agregar entradas adicionales para Yaboot, ya sea para otros sistemas\n"
-"operativos, nĂşcleos alternativos, o para una imagen de arranque de\n"
-"emergencia.\n"
-"\n"
-"Para otros sistemas operativos, la entrada consiste sĂłlo de una etiqueta y\n"
-"la particiĂłn raĂ­z.\n"
-"\n"
-"Para Linux, hay algunas opciones posibles:\n"
-"\n"
-" * Etiqueta: esta es simplemente el nombre que deberĂĄ teclear en el prompt\n"
-"de yaboot para seleccionar esta opciĂłn de arranque.\n"
-"\n"
-" * Imagen: esta deberĂ­a ser el nombre del nĂşcleo a arrancar. TĂ­picamente,\n"
-"vmlinux o una variaciĂłn de vmlinux con una extensiĂłn.\n"
-"\n"
-" * RaĂ­z: el dispositivo \"root\" o \"/\" para su instalaciĂłn Linux.\n"
-"\n"
-" * AĂąadir: la opciĂłn de aĂąadir al nĂşcleo se usa bastante sobre el hardware\n"
-"Apple para asistir en la inicializaciĂłn del hardware de vĂ­deo, o para\n"
-"habilitar la emulaciĂłn de los botones del ratĂłn con el teclado para los\n"
-"botones 2do y 3ro del ratĂłn que por lo general no tienen los ratones\n"
-"estĂĄndar de Apple. Algunos ejemplos son los siguientes:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: esta opciĂłn se puede usar o bien para cargar los mĂłdulos\n"
-"iniciales, antes que estĂŠ disponible el dispositivo de arranque, o bien\n"
-"cargar una imagen de ramdisk para una situaciĂłn de arranque de emergencia.\n"
-"\n"
-" * TamaĂąo de Initrd: generalmente el tamaĂąo por defecto del ramdisk es 4096\n"
-"bytes. Puede usar esta opciĂłn si necesita asignar un ramdisk mayor.\n"
-"\n"
-" * Lectura-Escritura: normalmente la particiĂłn \"root\" se levanta en modo\n"
-"de sĂłlo lectura, para permitir una verificaciĂłn del sistema de archivos\n"
-"antes que el sistema se levante por completo. AquĂ­ puede cambiar esta\n"
-"opciĂłn.\n"
-"\n"
-" * NoVideo: en caso que el hardware de vĂ­deo de Apple sea excepcionalmente\n"
-"problemĂĄtico, puede seleccionar esta opciĂłn para arrancar en el modo\n"
-"\"novideo\", con soporte nativo para el frame-buffer.\n"
-"\n"
-" * Predeterminada: selecciona a esta entrada como la opciĂłn Linux por\n"
-"defecto, que se puede elegir simplemente presionando [Intro] en el prompt\n"
-"de Yaboot. Esta entrada tambiĂŠn se marcarĂĄ con un \"*\", si presiona [Tab]\n"
-"para ver las selecciones del arranque."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot es un cargador de arranque para el hardware NewWorld MacIntosh. El\n"
-"mismo puede arrancar o GNU/Linux, o MacOS o MacOSX si se encuentran en su\n"
-"computadora. Normalmente, estos sistemas operativos se detectan e instalan\n"
-"correctamente. Si este no es el caso, puede agregar una entrada a mano en\n"
-"esta pantalla. Tenga cuidado de elegir los parĂĄmetros correctos.\n"
-"\n"
-"Las opciones principales de Yaboot son:\n"
-"\n"
-" * Mensaje de Init: un mensaje de texto simple que se muestra antes del\n"
-"prompt de arranque.\n"
-"\n"
-" * Dispositivo de arranque: indica donde desea colocar la informaciĂłn\n"
-"necesaria para arrancar en GNU/Linux. Generalmente, se configura una\n"
-"particiĂłn bootstrap con anterioridad para contener esta informaciĂłn.\n"
-"\n"
-" * Demora de Open Firmware: a diferencia de LILO, hay dos demoras\n"
-"disponibles con Yaboot. La primera se mide en segundos y aquĂ­ puede elegir\n"
-"entre CD, arranque OF, MacOS o Linux.\n"
-"\n"
-" * Demora de arranque del nĂşcleo: esta demora es similar a la demora de\n"
-"arranque de LILO. Luego de seleccionar Linux, tendrĂĄ esta demora en dĂŠcimas\n"
-"de segundo antes que se seleccione su descripciĂłn del nĂşcleo\n"
-"predeterminada.\n"
-"\n"
-" * ÂżHabilitar arranque desde el CD?: marcando esta opciĂłn Usted puede "
-"elegir\n"
-"\"C\" para el CD en el primer prompt de arranque.\n"
-"\n"
-" * ÂżHabilitar arranque OF?: marcando esta opciĂłn Usted puede elegir \"N\"\n"
-"para Open Firmware en el primer prompt de arranque.\n"
-"\n"
-" * SO predeterminado: puede seleccionar quĂŠ sistema operativo arrancarĂĄ por\n"
-"defecto cuando expira la demora de Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"AquĂ­ se le presentan varios parĂĄmetros que conciernen a su mĂĄquina.\n"
-"Dependiendo de su hardware instalado, puede o no, ver las entradas\n"
-"siguientes:\n"
-"\n"
-" * \"RatĂłn\": verifique la configuraciĂłn del ratĂłn y haga clic sobre el\n"
-"botĂłn para cambiarla, si es necesario.\n"
-"\n"
-" * \"Teclado\": verifique la configuraciĂłn de la disposiciĂłn del teclado y\n"
-"haga clic sobre el botĂłn para cambiarla, si es necesario.\n"
-"\n"
-" * \"Huso horario\": DrakX, de manera predeterminada, adivina su huso\n"
-"horario a partir del idioma que Usted ha elegido. Pero nuevamente, al igual\n"
-"que con la elecciĂłn del teclado, puede ocurrir que no se encuentre en el\n"
-"paĂ­s que sugiere el idioma elegido. De ser asĂ­, puede necesitar hacer clic\n"
-"sobre el botĂłn \"Huso horario\" para configurar el reloj de acuerdo al huso\n"
-"horario en el que se encuentre.\n"
-"\n"
-" * \"Impresora\": al hacer clic sobre el botĂłn \"Sin impresora\" se abrirĂĄ\n"
-"el asistente de configuraciĂłn de la impresora.\n"
-"\n"
-" * \"Tarjeta de sonido\": si se detecta una tarjeta de sonido en su "
-"sistema,\n"
-"la misma se muestra aquĂ­. Durante la instalaciĂłn no es posible modificaciĂłn\n"
-"alguna.\n"
-"\n"
-" * \"Tarjeta de TV\": si se detecta una tarjeta de TV en su sistema, la\n"
-"misma se muestra aquĂ­. Durante la instalaciĂłn no es posible modificaciĂłn\n"
-"alguna.\n"
-"\n"
-" * \"Tarjeta RDSI\": si se detecta una tarjeta RDSI en su sistema, la misma\n"
-"se muestra aquĂ­. Puede hacer clic sobre el botĂłn para cambiar los\n"
-"parĂĄmetros asociados a la misma."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Elija la unidad de disco que desea borrar para instalar su particiĂłn\n"
-"Mandrake Linux nueva. Tenga cuidado, ÂĄse perderĂĄn todos los datos de la\n"
-"misma y no se podrĂĄn recuperar!."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/es/drakx-help.xml
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Haga clic sobre \"Aceptar\" si desea borrar todos los datos y particiones\n"
-"presentes en esta unidad de disco. Tenga cuidado, luego de hacer clic sobre\n"
-"\"Aceptar\", no podrĂĄ recuperar los datos y las particiones presentes en\n"
-"esta unidad de disco, incluyendo los datos de Windows.\n"
-"\n"
-"Haga clic sobre \"Cancelar\" para cancelar esta operaciĂłn sin perder los\n"
-"datos y las particiones presentes en esta unidad de disco."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"No se puede acceder a los mĂłdulos del nĂşcleo correspondientes a su nĂşcleo "
-"(no se encuentra el archivo %s), esto generalmente singnifica que su "
-"disquete de arranque no contiene un nĂşcleo de misma versiĂłn que el soporte "
-"de instalaciĂłn (haga un nuevo disquete de arranque por favor)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "TĂş tambiĂŠn debes formatear %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Ha seleccionado los siguientes servidores: %s\n"
-"\n"
-"\n"
-"Estos servidores se activan por defecto. No se les conocen problemas de\n"
-"seguridad, pero se pueden encontrar problemas nuevos. En ese caso, "
-"debeasegurarse de\n"
-"actualizarlos tan pronto como sea posible.\n"
-"\n"
-"\n"
-"ÂżRealmente desea instalar estos servidores?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "No se puede usar difusiĂłn sin un dominio NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Inserte un disquete formateado con FAT en la disquetera %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Este disquete no estĂĄ formateado con FAT"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para utilizar esta selecciĂłn de paquetes salvada, arranque la instalaciĂłn "
-"con \"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Error al leer el archivo %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"AlgĂşn hardware de su computadora necesita controladores \"propietarios\" "
-"para funcionar.\n"
-"Puede encontrar informaciĂłn sobre ellos en: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Debe tener una particiĂłn raĂ­z.\n"
-"Para ello, cree una particiĂłn (o haga clic sobre una que ya existe).\n"
-"Luego elija la acciĂłn \"Punto de montaje\" y defĂ­nalo como '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Debe tener una particiĂłn de intercambio"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"No dispone de una particiĂłn de intercambio\n"
-"\n"
-"ÂżDesea continuar de todas formas?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe tener una particiĂłn FAT montada en /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar el espacio libre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hay espacio libre suficiente para asignar las particiones nuevas"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usar la particiĂłn existente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "No hay ninguna particiĂłn existente para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar la particiĂłn de Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ÂżQuĂŠ particiĂłn desea usar para Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Elija los tamaĂąos"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "TamaĂąo de la particiĂłn raĂ­z en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "TamaĂąo de la particiĂłn de intercambio en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar el espacio libre de la particiĂłn Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "ÂżA quĂŠ particiĂłn desea cambiarle el tamaĂąo?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculando los lĂ­mites del sistema de archivos Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"El redimensionador de tamaĂąo de la FAT no puede gestionar su particiĂłn, \n"
-"ocurriĂł el error siguiente: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Su particiĂłn Windows estĂĄ muy fragmentada, por favor primero ejecute \"defrag"
-"\""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ÂĄADVERTENCIA!\n"
-"\n"
-"Ahora DrakX cambiarĂĄ el tamaĂąo de su particiĂłn Windows. Proceda con "
-"cuidado:\n"
-"esta operaciĂłn es peligrosa. Si aĂşn no lo hizo, primero deberĂ­a salir de\n"
-"la instalaciĂłn, ejecutar scandisk bajo Windows (y opcionalmente ejecutar "
-"defrag),\n"
-"y luego volver a iniciar la instalaciĂłn. TambiĂŠn deberĂ­a hacer una copia de\n"
-" seguridad de sus datos.\n"
-"Cuando estĂŠ seguro, pulse sobre Aceptar."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "ÂżQuĂŠ tamaĂąo desea conservar para windows en la"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "particiĂłn %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FallĂł el redimensionado de la FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"No hay particiones FAT para redimensionar o para usar como loopback (o no "
-"queda espacio suficiente)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Borrar el disco entero"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Quitar Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Tiene mĂĄs de un disco rĂ­gido, Âżsobre cuĂĄl desea instalar Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Se perderĂĄn TODAS las particiones y sus datos en la unidad %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamiento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Ahora puede particionar %s.\n"
-"Cuando haya terminado, no se olvide de guardar usando 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "No queda espacio libre suficiente en la particiĂłn de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "No se puede encontrar nada de espacio para instalar"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"El asistente de particionamiento de DrakX encontrĂł las siguientes soluciones:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "FallĂł el particionamiento: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Levantando la red"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Bajando la red"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"OcurriĂł un error y no se puede gestionar de forma adecuada.\n"
-"ContinĂşe bajo su propio riesgo."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaje %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Algunos paquetes importantes no fueron instalados correctamente.\n"
-"Seguramente su lector de CD o su CD de instalaciĂłn sean defectuosos.\n"
-"Compruebe el CD de instalaciĂłn en un sistema ya existente con el comando:\n"
-" rpm -qpl Mandrake/RPMS/*.rpm\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenido a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ninguna disquetera disponible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando en la etapa '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Su sistema tiene pocos recursos. Puede tener algĂşn problema instalando\n"
-"Mandrake Linux. Si eso ocurre, puede intentar una instalaciĂłn tipo texto.\n"
-"Para ello, presione 'F1' cuando arranque desde el CDROM, e introduzca 'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Tipo de instalaciĂłn"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Por favor, elija uno de los siguentes tipos de instalaciĂłn:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"El tamaĂąo total para los grupos que seleccionĂł es de aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si desea instalar un tamaĂąo total inferior,\n"
-"elija el porcentaje de paquetes que desea instalar.\n"
-"\n"
-"Un porcentaje bajo instalarĂĄ sĂłlo los paquetes mĂĄs importantes;\n"
-"un porcentaje de 100%% instalarĂĄ todos los paquetes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Tiene espacio en disco para sĂłlo %d%% de esos paquetes.\n"
-"\n"
-"Si desea instalar menos de esto,\n"
-"elija el porcentaje de paquetes que desea instalar.\n"
-"Un porcentaje bajo instalarĂĄ sĂłlo los paquetes mĂĄs importantes;\n"
-"un porcentaje de %d%% instalarĂĄ todos los que sea posible."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "PodrĂĄ elegirlos mĂĄs detalladamente en la etapa siguiente"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Porcentaje de paquetes a instalar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "SelecciĂłn de grupos de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "SelecciĂłn de paquetes individuales"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "TamaĂąo total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paquete incorrecto"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nombre: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "VersiĂłn: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "TamaĂąo: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"No puede seleccionar este paquete porque no hay espacio suficiente para "
-"instalarlo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Se van a instalar los siguientes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Se van a quitar los siguientes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "No puede seleccionar/deseleccionar este paquete"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este es un paquete obligatorio, no puede desmarcarlo"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "No puede desmarcar este paquete. Ya estĂĄ instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Se debe actualizar este paquete\n"
-"ÂżEstĂĄ seguro que quiere desmarcarlo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "No puede desmarcar este paquete. Debe ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Mostrar los paquetes seleccionados automĂĄticamente"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Cargar/Guardar en un disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Actualizando la selecciĂłn de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "InstalaciĂłn mĂ­nima"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Elija los paquetes que desea instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tiempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Preparando la instalaciĂłn. Espere, por favor"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando el paquete %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rechazar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"ÂĄCambie su CD-ROM!\n"
-"\n"
-"Inserte el CD-ROM etiquetado como \"%s\" en la unidad y pulse Aceptar cuando "
-"lo haya hecho.\n"
-"Si no lo posee, pulse Cancelar para cancelar la instalaciĂłn desde este CD-"
-"ROM."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "ÂżSeguir adelante?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Hubo un error al ordenar los paquetes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Hubo un error al instalar los paquetes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Importante\n"
-"\n"
-"Haga el favor de leer cuidadosamente el presente documento. En caso de "
-"desacuerdo\n"
-"con el presente documento, no estĂĄ autorizado a instalar los demĂĄs\n"
-"CDs. En este caso seleccione 'Rechazar' para seguir la instalaciĂłn sin\n"
-"estos CDs.\n"
-"\n"
-"\n"
-"Algunos componentes de software contenidos en los siguientes CDs no\n"
-"estĂĄn sometidos a las licencias GPL o similares que permitan la copia,\n"
-"adaptaciĂłn o redistribuciĂłn. Cada uno de los componentes de software\n"
-"esta distribuido bajo los tĂŠrminos y condiciones de un acuerdo de\n"
-"licencia propio. Por favor, dirĂĄjase a ĂŠste y acĂŠptelo antes de instalarlo,\n"
-"usarlo o redistribuirlo. Generalmente, estas licencias no autorizan la\n"
-"copia (salvo las destinadas a copias de seguridad), la distribuciĂłn, "
-"decompilaciĂłn,\n"
-"desensamblado, ingenierĂ­a inversa, reconstituciĂłn de la lĂłgica del\n"
-"programa y/o modificaciĂłn, salvo en la medida y para las necesidades\n"
-"autorizadas por las leyes vigentes. Toda violaciĂłn de la licencia\n"
-"vigente implica generalmente la caducidad de estĂĄ, sin perjuicio a\n"
-"todos los demĂĄs derechos o acciones dirigidos en contra de Ud. Salvo si\n"
-"el acuerdo de licencia lo autoriza, no puede instalar estos programas\n"
-"en mĂĄs de una mĂĄquina, ni adaptarlos para un uso en red. Si fuese\n"
-"necesario, contacte con el distribuidor de cada programa para\n"
-"obtener licencias adicionales. La distribuciĂłn a terceros de copias de\n"
-"los programas o de la documentaciĂłn que lo acompaĂąa generalmente\n"
-"suele estar prohibida.\n"
-"\n"
-"\n"
-"Todos los derechos, tĂ­tulos e intereses de esos programas son la\n"
-"propiedad exclusiva de sus autores respectivos y estĂĄn protegidos por el\n"
-"derecho de la propiedad intelectual y otras leyes aplicables al derecho\n"
-"del software.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "OcurriĂł un error"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "ÂżRealmente desea salir de la instalaciĂłn?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acuerdo de licencia"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"EL PRESENTE TEXTO ES UNA TRADUCCIÓN A PROPÓSITO EXCLUSIVAMENTE\n"
-"INFORMATIVO DE LOS TÉRMINOS DE LA LICENCIA DE MANDRAKE LINUX. EN\n"
-"NINGÚN CASO LA PRESENTE TRADUCCIÓN TIENE VALOR LEGAL SIENDO OFICIAL\n"
-"EXCLUSIVAMENTE LA VERSIÓN EN FRANCÉS DE LA LICENCIA DE LINUX-MANDRAKE.\n"
-"No obstante, esperamos que esta traducciĂłn ayudarĂĄ a los que hablan\n"
-"castellano a entenderla mejor.\n"
-"\n"
-"\n"
-"IntroducciĂłn\n"
-"\n"
-"El conjunto de elementos que incluye el sistema operativo y los\n"
-"diferentes componentes disponibles en la distribuciĂłn Mandrake Linux\n"
-"se denominarĂĄn en adelante \"Programas\". Los programas incluyen en\n"
-"particular, pero de manera no limitativa, el conjunto de programas,\n"
-"procedimientos, reglas y documentaciones relativas al sistema\n"
-"operativo y a los diferentes componentes de la distribuciĂłn\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licencia\n"
-"\n"
-"Le rogamos leer cuidadosamente este documento. Éste constituye un\n"
-"contrato de licencia entre Ud. (persona fĂ­sica o persona moral) y\n"
-"MandrakeSoft S.A. aplicado a los programas. El hecho de instalar, \n"
-"duplicar o usar los programas de cualquier manera, indica\n"
-"que acepta explĂ­citamente los tĂŠrminos y condiciones de esta licencia\n"
-"y que estĂĄ totalmente de acuerdo en lo referente a los tĂŠrminos de la "
-"misma.\n"
-"En caso de no estar de acuerdo con el presente documento, no estĂĄ\n"
-"autorizado a instalar, duplicar ni usar de ninguna manera\n"
-"este producto. El contrato de licencia sera automĂĄticamente anulado\n"
-"sin aviso previo en el caso que no se cumplan las disposiciones\n"
-"de este documento. En caso de anulaciĂłn Ud. tendrĂĄ que anular\n"
-"inmediatamente todo ejemplar y todas las copias de todos los programas\n"
-"y de todas las documentaciones que constituyen el sistema operativo y\n"
-"los diferentes componentes disponibles en en la distribuciĂłn\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"2. GarantĂ­a y limitaciones de garantĂ­a\n"
-"\n"
-"Los programas y la documentaciĂłn que los acompaĂąa son proporcionados\n"
-"tal cual y sin ninguna garantĂ­a. MandrakeSoft S.A.\n"
-"no se responsabiliza de las consecuencias de un daĂąo directo,\n"
-"especial, indirecto o accesorio, de cualquiera naturaleza que sea, en\n"
-"relaciĂłn con la utilizaciĂłn de los programas, en particular y de\n"
-"manera no limitada, todos daĂąos resultados por perdidas de\n"
-"beneficio, interrupciĂłn de actividad, pĂŠrdida de informaciones\n"
-"comerciales u otras perdidas financieras, asĂ­ que por eventuales\n"
-"condenaciones e indemnizaciones debidas como consecuencia de una decisiĂłn "
-"de\n"
-"la justicia, y eso incluso si MandrakeSoft S.A. hubiera sido informada de "
-"la\n"
-"apariciĂłn o eventualidad de tales daĂąos.\n"
-"\n"
-"ADVERTENCIA EN CUANTO A LA POSESIÓN O USO DE PROGRAMAS PROHIBIDOS\n"
-"EN CIERTOS PAÍSES\n"
-"\n"
-"En ningĂşn caso, ni MandrakeSoft S.A. ni sus proveedores podrĂĄn ser\n"
-"responsabilizados por un perjuicio especial, directo, indirecto o\n"
-"accesorio, de cualquier naturaleza (en particular y de manera\n"
-"no limitada, pĂŠrdidas de beneficio, interrupciĂłn de actividad,\n"
-"pĂŠrdida de informaciones comerciales u otras pĂŠrdidas financieras, asĂ­\n"
-"como por posibles condenaciones e indemnizaciones debidas\n"
-"consecuentes a una decisiĂłn de justicia) que resultarĂ­a de la\n"
-"utilizaciĂłn, detenciĂłn o simple descarga desde uno de los sitios de\n"
-"transferencia de Mandrake Linux de programas prohibidos por la\n"
-"legislaciĂłn a la que estĂĄ sometido. Esta advertencia se aplica en\n"
-"particular a algunos componentes de criptografĂ­a fuerte incluĂ­dos en los\n"
-"programas.\n"
-"\n"
-"\n"
-"3. Licencia GPL y otras licencias\n"
-"\n"
-"Los Programas estĂĄn constituidos por mĂłdulos de programas creados por\n"
-"diversas personas (fĂ­sicas o legales). Muchos de ellos se\n"
-"distribuyen bajo los tĂŠrminos de la Licencia PĂşblica General GNU\n"
-"(denominada a partir de ahora \"GPL\") u otras licencias parecidas. La "
-"mayorĂ­a\n"
-"de estas licencias le permiten copiar, adaptar o redistribuir los\n"
-"mĂłdulos de los programas que cubren. Haga el favor de leer y de aceptar los "
-"tĂŠrminos y\n"
-"condiciones de las licencias que acompaĂąan a cada uno de ellos antes de\n"
-"usarlos. Toda pregunta relativa a la licencia se debe dirigir al autor\n"
-"(o su representante) de dicho programa, y no a MandrakeSoft. Los\n"
-"programas desarrollados por MandrakeSoft estĂĄn sometidos a la licencia\n"
-"GPL. La documentaciĂłn escrita por MandrakeSoft esta sometida a una\n"
-"licencia especifica. Haga el favor de dirigirse a la documentaciĂłn para\n"
-"obtener mĂĄs informaciĂłn.\n"
-"\n"
-"\n"
-"4. Propiedad intelectual\n"
-"\n"
-"Todos los derechos, tĂ­tulos e intereses de los diferentes programas\n"
-"son propiedad exclusiva de sus autores respectivos y estĂĄn protegidos\n"
-"por el derecho de la propiedad intelectual y otras leyes aplicadas a los\n"
-"derechos de los programas. Las marcas \"Mandrake\" y \"Mandrake Linux\" "
-"asĂ­\n"
-"como los logotipos asociados son registrados por MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Disposiciones diversas\n"
-" \n"
-"Si alguna disposiciĂłn de este contrato de licencia fuera declarada\n"
-"nula, ilegal o inaplicable por un tribunal competente, esta\n"
-"disposiciĂłn serĂ­a excluida del presente contrato. Sin embargo\n"
-"Ud. seguirĂĄ sometido a las otras disposiciones, que tendrĂĄn\n"
-"plenos efectos. El contrato de licencia estĂĄ regido por las leyes\n"
-"francesas. Toda disputa relativa a los presentes tĂŠrminos serĂĄ\n"
-"resuelta, preferentemente, por vĂ­a amigable. En caso de desacuerdo con\n"
-"MandrakeSoft S.A., el litigio serĂĄ tramitado a los tribunales\n"
-"competentes de ParĂ­s, Francia. Para cualquier pregunta relacionada con\n"
-"este documento, por favor, pĂłngase en contacto con MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Seleccione la distribuciĂłn de su teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "AquĂ­ tiene la lista completa de teclados disponibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "ÂżQuĂŠ tipo de instalaciĂłn desea?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "InstalaciĂłn/ActualizaciĂłn"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "ÂżEs una instalaciĂłn o una actualizaciĂłn?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendada"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Experto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "ActualizaciĂłn"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "SĂłlo actualizar los paquetes."
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Por favor, seleccione el tipo de su ratĂłn."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Puerto del ratĂłn"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Seleccione el puerto serie al que estĂĄ conectado el ratĂłn, por favor."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "EmulaciĂłn de los botones"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "EmulaciĂłn del botĂłn 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "EmulaciĂłn del botĂłn 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarjetas PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configurando dispositivos IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "no hay particiones disponibles"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Rastreando las particiones para encontrar los puntos de montaje"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Seleccione los puntos de montaje"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"No se puede leer su tabla de particiones, estĂĄ demasiado deteriorada :(\n"
-"Se intentarĂĄ seguir y vaciar las particiones malas (ÂĄse perderĂĄn TODOS LOS "
-"DATOS!).\n"
-"La otra soluciĂłn es no permitir que DrakX modifique la tabla de "
-"particiones.\n"
-"(el error es %s)\n"
-"\n"
-"ÂżEstĂĄ de acuerdo en perder todas las particiones?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake no pudo leer correctamente la tabla de particiones.\n"
-"ÂĄContinĂşe bajo su propio riesgo!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"ÂĄNo hay 1MB de espacio para bootstrap! La instalaciĂłn continuarĂĄ, pero para "
-"arrancar su sistema, necesitarĂĄ crear la particiĂłn bootstrap en DiskDrake"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "No se encontrĂł particiĂłn raĂ­z para efectuar la actualizaciĂłn"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "ParticiĂłn raĂ­z"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "ÂżCual es la particiĂłn raĂ­z (/) de su sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Necesita reiniciar el equipo para que se efectĂşe la modificaciĂłn de la tabla "
-"de particiones"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Elija las particiones que desea formatear"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "ÂżVerificar el disco en busca de bloques malos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formateando las particiones"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando y formateando el archivo %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Espacio de intercambio insuficiente para completar la instalaciĂłn, aĂąada un "
-"poco mĂĄs"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Buscando los paquetes disponibles"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Encontrando los paquetes a actualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Su sistema no tiene espacio suficiente para instalar o actualizar (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completa (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "MĂ­nima (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendada (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Por favor, seleccione cargar o guardar la selecciĂłn de paquetes en "
-"disquete.\n"
-"El formato es el mismo que los disquetes generados para la instalaciĂłn "
-"automĂĄtica."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Cargar desde un disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Cargando desde un disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "SelecciĂłn de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Introduzca un disquete que contenga la selecciĂłn de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Guardar en un disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "El tamaĂąo seleccionado es mayor que el disponible"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tipo de instalaciĂłn."
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"No ha seleccionado ningĂşn grupo de paquetes\n"
-"Elija por favor la mĂ­nima instalaciĂłn que quiera."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Con X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Con documentaciĂłn bĂĄsica (ÂĄrecomendado!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "InstalaciĂłn mĂ­nima \"en serio\" (especialmente sin urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si tiene todos los CDs de la lista siguiente, haga clic sobre \"Aceptar\".\n"
-"Si no tiene ningĂşn CD, haga clic sobre \"Cancelar\".\n"
-"Si sĂłlo le faltan algunos CDs, desmĂĄrquelos y haga clic sobre \"Aceptar\"."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetado como \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparando la instalaciĂłn"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando el paquete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "ConfiguraciĂłn posterior a la instalaciĂłn"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Por favor, inserte el disquete de arranque en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Por favor, inserte el disquete de mĂłdulos actualizados en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Ahora tiene la posibilidad de bajar por la red paquetes especĂ­ficos\n"
-"durante el procedimiento de instalaciĂłn, incuĂ­dos programas de cifrado.\n"
-"\n"
-"ADVERTENCIA:\n"
-"\n"
-"Debido a las diferencias de los requisitos aplicables a ese tipo de\n"
-"programas por las distintas jurisdicciones, es el cliente y/o el usuario "
-"final\n"
-"de dichos programas quien debe verificar que las leyes de su jurisdicciĂłn "
-"le\n"
-"permitan bajar, guardar y/o utilizar dichos programas.\n"
-"\n"
-"En particular el cliente y/o usuario final debe tener un cuidado especial\n"
-"de no violar las leyes de su de su jurisdicciĂłn. En el caso de que el "
-"cliente y/o\n"
-"el usuario final no respetase las condiciones de las leyes que le son\n"
-"aplicables, es posible que sea severamente sancionado por la ley.\n"
-"\n"
-"En ningĂşn caso MandrakeSoft ni ninguno de sus fabricantes y/o\n"
-"distribuidores se puede considerar responsable por daĂąos especiales, "
-"directos\n"
-"o indirectos de cualquier tipo (incluyendo, pero sin limitarse a ello, "
-"pĂŠrdida\n"
-"de beneficios, ruptura de negocios, pĂŠrdida de datos comerciales u otras\n"
-"pĂŠrdidas pecuniarias, o eventuales responsabilidades e indemnizaciones\n"
-"a pagar debido a decisiones de la justicia) que puedan ocurrir mediante el\n"
-"uso, posesiĂłn o el sĂłlo hecho de descargar de Internet o por otro medio, "
-"programas\n"
-"a los cuales el cliente y/o usuario final tenga acceso despuĂŠs de haber\n"
-"firmado el presente convenio.\n"
-"\n"
-"Para preguntas relativas a este convenio, pĂłngase en contacto con\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Ahora tiene la posibilidad de bajarse paquetes actualizados,\n"
-"que han salido despues de que se haya hecho la distribuciĂłn.\n"
-"\n"
-"ConseguirĂĄ actualizaciones de fallos y de seguridad, pero debe\n"
-"tener una conexiĂłn a la Internet configurada para proceder.\n"
-"\n"
-"ÂżDesea instalar las actualizaciones?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Contactando con el sitio web de Mandrake Linux para obtener la lista de las "
-"rĂŠplicas disponibles"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elija un sitio de rĂŠplica del que bajar los paquetes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-"Contactando con el sitio de rĂŠplica para obtener la lista de los paquetes "
-"disponibles"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "ÂżCuĂĄl es su huso horario?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Reloj interno puesto a GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "SincronizaciĂłn automĂĄtica de hora (usando NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Servidor NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Sin impresora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "ÂżTiene una tarjeta de sonido ISA?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Use \"sndconfig\" luego de la instalaciĂłn para configurar su tarjeta de "
-"sonido"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"No se detectĂł tarjeta de sonido. Pruebe \"harddrake\" luego de la instalaciĂłn"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resumen"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "RatĂłn"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Huso horario"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impresora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Tarjeta RDSI"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Tarjeta de sonido"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Tarjeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Archivos locales"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "ContraseĂąa de root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Sin contraseĂąa"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Esta contraseĂąa es demasiado simple\n"
-"(tiene que tener por lo menos una longitud de %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "AutentificaciĂłn"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "AutentificaciĂłn LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Servidor LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "AutentificaciĂłn NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"Ăştil\n"
-"si no desea instalar SILO en su sistema, o si cualquier otro sistema "
-"operativo borra\n"
-"SILO, o si SILO no funciona con su configuraciĂłn de hardware. Un disquete\n"
-"de arranque personalizado tambiĂŠn se puede usar con la imagen de rescate de\n"
-" Mandrake haciendo asĂ­ mucho mĂĄs fĂĄcil la recuperaciĂłn en caso de fallo\n"
-"grave del sistema.\n"
-"\n"
-"Si desea crear un disquete de arranque para su sistema, inserte un disquete\n"
-"en la primer disquetera y presione \"Aceptar\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primera disquetera"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segunda disquetera"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Omitir"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disquete de arranque personalizado da la posibilidad de arrancar su "
-"equipo\n"
-"bajo Linux sin depender del cargador de arranque normal. Esto puede ser "
-"Ăştil\n"
-"si no desea instalar LILO (o grub) en su sistema, o si cualquier otro "
-"sistema operativo borra\n"
-"LILO, o si LILO no funciona con su configuraciĂłn de hardware. Un disquete\n"
-"de arranque personalizado tambiĂŠn se puede usar con la imagen de rescate de\n"
-"Mandrake haciendo asĂ­ mucho mĂĄs fĂĄcil la recuperaciĂłn en caso de fallo\n"
-"grave del sistema. ÂżDesea crear un disquete de arranque para su sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(¡ATENCIÓN! Está utilizando XFS en su partición raíz,\n"
-"la creaciĂłn de un disquete de arranque en un disquete de 1.44Mb puede "
-"fallar\n"
-"porque XFS necesita un controlador muy grande)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Disculpe, pero no hay ninguna disquetera disponible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Elija la disquetera que desea usar para crear el disco de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Inserte un disquete en %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creando el disquete de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparando el cargador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Parece que tiene una mĂĄquina desconocida o demasiado\n"
-"antigua. El gestor de arranque yaboot no funcionarĂĄ.\n"
-"La instalaciĂłn continuarĂĄ, pero necesitarĂĄ\n"
-"utilizar BootX para arrancar su mĂĄquina."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "ÂżDesea usar aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"OcurriĂł un error al instalar aboot, \n"
-"Âżdesea forzar la instalaciĂłn incluso si ello implicara la destrucciĂłn de la "
-"primera particiĂłn?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instalando cargador de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"FallĂł la instalaciĂłn del cargador de arranque. OcurriĂł el siguiente error:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Puede necesitar cambiar el dispositivo de arranque de Open Firmware para\n"
-" activar el cargador de arranque. Si no ve el prompt del cargador de\n"
-" arranque al reiniciar, mantenga presionado Command-Option-O-F al\n"
-" reiniciar e introduzca:\n"
-" setenv boot-device %s, \\\\:tbxi\n"
-" Luego escriba: shut-down\n"
-"La prĂłxima vez que arranque deberĂ­a ver el prompt del cargador de arranque."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inserte un disquete en blanco en la unidad %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creando el disquete de instalaciĂłn automĂĄtica"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Algunas de las etapas no fueron completadas.\n"
-"\n"
-"ÂżRealmente desea salir ahora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Felicidades, la instalaciĂłn estĂĄ completa.\n"
-"Extraiga el soporte de arranque y presione Intro para reiniciar.\n"
-"\n"
-"Para obtener informaciĂłn sobre correcciones disponibles para esta versiĂłn\n"
-"de Mandrake Linux, consulte el archivo de erratas disponible en\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Hay informaciĂłn disponible sobre cĂłmo configurar su sistema en el capĂ­tulo "
-"de\n"
-"configuraciĂłn tras la instalaciĂłn de la guĂ­a de usuario oficial de Mandrake "
-"Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Generar un disquete de instalaciĂłn automĂĄtica"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"La instalaciĂłn automĂĄtica puede automatizarse por completo si lo desea,\n"
-"ÂĄÂĄen ese caso se adueĂąarĂĄ del disco rĂ­gido!!\n"
-"(la intenciĂłn de esto es instalarlo en otro ordenador).\n"
-"\n"
-"Puede preferir reproducir la instalaciĂłn.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizada"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Reproducir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Guardar la selecciĂłn de paquetes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "InstalaciĂłn %s de Mandrake Linux"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> entre elementos | <espacio> seleccionar | <F12> pantalla "
-"sig. "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "no se encuentra kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "falta \"consolehelper\""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Elija un archivo"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanzada"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "BĂĄsico"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Espere, por favor"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir el ĂĄrbol"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Contraer el ĂĄrbol"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Cambiar entre vista plana y ordenada por grupos"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "ElecciĂłn incorrecta, intĂŠntelo de nuevo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "ÂżSu elecciĂłn? (por defecto %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entradas que tendrĂĄ que rellenar:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "ÂżSu elecciĂłn? (0/1, por defecto '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "BotĂłn `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "ÂżDesea pulsar este botĂłn?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "ÂżSu elecciĂłn? (por defecto %s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hay muchas cosas para seleccionar (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Por favor, seleccione el primer nĂşmero del rango de 10 que desee\n"
-"editar, o pulse Intro para continuar.\n"
-"ÂżSu elecciĂłn?"
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Aviso, una etiqueta cambiĂł:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Reenviar"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "AlemĂĄn"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "EspaĂąol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "FinlandĂŠs"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "FrancĂŠs"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruego"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruso"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "BritĂĄnico"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Estadounidense"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenio (antiguo)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenio (nuevo)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fonĂŠtico)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "AzerbadjĂĄn (latĂ­n)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "BĂşlgaro (fonĂŠtico)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "BĂşlgaro (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "BrasileĂąo (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorruso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Suizo (germĂĄnico)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Suizo (francĂŠs)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "AlemĂĄn (sin teclas muertas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "DanĂŠs"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruego)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Sueco)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonio"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgiano (estilo \"ruso\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgiano (estilo \"latĂ­n\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Griego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "HĂşngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "IsraelĂ­"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "IsraelĂ­ (fonĂŠtico)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "IranĂ­"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "IslandĂŠs"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "JaponĂŠs de 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Coreano"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinoamericano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antiguo)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (nuevo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"numĂŠrico\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonĂŠtico\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "LetĂłn"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "HolandĂŠs"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (distribuciĂłn qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (distribuciĂłn qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "PortuguĂŠs"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadiense (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumano (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumano (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Esloveno"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbio (cirĂ­lico)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado tailandĂŠs"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Teclado tajik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (modelo \"F\" tradicional)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (modelo \"Q\" moderno)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraniano"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"numĂŠrico\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavo (latĂ­n)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Tecla Alt derecha"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Ambas teclas Shift simultĂĄneamente"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Las teclas Control y Shift simultĂĄneamente"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Tecla CapsLock"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Las teclas Ctrl y Alt simultĂĄneamente"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Las teclas Alt y Shift simultĂĄneamente"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "La tecla \"MenĂş\""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Tecla \"Windows\" de la izquierda"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Tecla \"Windows\" de la derecha"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Montajes circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Quite los volĂşmenes lĂłgicos primero\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"El soporte PCMCIA no existe en los nĂşcleos 2.2. Por favor, utilice un nĂşcleo "
-"2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "RatĂłn Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "RatĂłn genĂŠrico PS2 con rueda"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botĂłn"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "RatĂłn de 2 botones genĂŠrico"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "GenĂŠrico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rueda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "RatĂłn de 3 botones genĂŠrico"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "RatĂłn Logitech (serie, antiguo tipo C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "ratĂłn bus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botones"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botones"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ninguno"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Sin ratĂłn"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Pruebe su ratĂłn, por favor."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para activar el ratĂłn,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ÂĄMUEVA SU RUEDA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Siguiente ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "ÂżEs correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar a Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La forma mĂĄs comĂşn de conexiĂłn ADSL es con pppoe.\n"
-"Algunas conexiones usan pptp, otras pocas usan dhcp.\n"
-"Si no lo sabe con seguridad, elija 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"ÂżQuĂŠ cliente dhcp desea utilizar?\n"
-"dhcpcd es el predeterminado"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"No se ha detectado ningĂşn adaptador de red ethernet en su sistema.\n"
-"No se puede configurar este tipo de conexiĂłn."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Elija la interfaz de red"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Por favor, elija el adaptador de red que desea usar para conectarse a "
-"Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "no se encontrĂł ninguna tarjeta de red"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configurando la red"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Por favor introduzca el nombre de su mĂĄquina (host) si lo conoce.\n"
-"Algunos servidores DHCP necesitan del nombre de la mĂĄquina para funcionar.\n"
-"El nombre de su mĂĄquina deberĂ­a ser un nombre de mĂĄquina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nombre de la mĂĄquina"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Asistente para la configuraciĂłn de la red"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "MĂłdem RDSI externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Tarjeta RDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "ÂżDe quĂŠ tipo es su conexiĂłn RDSI?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"ÂżQuĂŠ configuraciĂłn de RDSI prefiere?\n"
-"\n"
-"* La configuraciĂłn antigua utiliza isdn4net. Tiene herramientas\n"
-" poderosas, pero es algo complicada de configurar para un reciĂŠn \n"
-" llegado, y no es estĂĄndar.\n"
-"* La configuraciĂłn nueva es mĂĄs fĂĄcil de entender, mĂĄs estĂĄndar,\n"
-" pero con menos herramientas.\n"
-"\n"
-"Le recomendamos la configuraciĂłn ligera (esto es, la nueva).\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "ConfiguraciĂłn nueva (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ConfiguraciĂłn antigua (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ConfiguraciĂłn de RDSI"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione su proveedor.\n"
-" Si no estĂĄ en la lista, elija No listado"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocolo de Europa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocolo de Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocolo para el resto del mundo"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocolo para el resto del mundo \n"
-" sin canal D (lĂ­neas alquiladas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "ÂżQuĂŠ protocolo desea utilizar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "ÂżQuĂŠ tipo de tarjeta tiene?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "No lo sĂŠ"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si tiene una tarjeta ISA, los valores de la prĂłxima pantalla deberĂ­an ser "
-"correctos.\n"
-"\n"
-"Si tiene una tarjeta PCMCIA, tiene que saber la irq y la e/s de su tarjeta.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "ÂżCuĂĄl es su tarjeta RDSI?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Se ha detectado una tarjeta RDSI PCI, pero no se conoce el tipo. Por favor, "
-"seleccione una tarjeta PCI en la pantalla siguiente."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"No se encontrĂł tarjeta PCI RDSI. Por favor, seleccione una en la pantalla "
-"siguiente."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Seleccione el puerto serie al que estĂĄ conectado su mĂłdem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opciones de llamada por mĂłdem"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nombre de la conexiĂłn"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "NĂşmero de telĂŠfono"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID de conexiĂłn"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Por script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Por terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nombre de dominio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segundo servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Puede desconectarse o volver a configurar su conexiĂłn."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Puede volver a configurar su conexiĂłn."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Ahora estĂĄ conectado a Internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Se puede conectar a Internet o volver a configurar su conexiĂłn."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Ahora no estĂĄ conectado a Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Conectar"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Desconectar"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configurar la conexiĂłn"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "ConfiguraciĂłn y conexiĂłn a Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ahora vamos a configurar la conexiĂłn %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ahora vamos a configurar la conexiĂłn %s.\n"
-"\n"
-"\n"
-"Pulse siguiente para continuar."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "ConfiguraciĂłn de la red"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Puesto que estĂĄ realizando una instalaciĂłn por red, su red ya estĂĄ "
-"configurada.\n"
-"Haga clic sobre aceptar para mantener su configuraciĂłn, o pulse cancelar "
-"para\n"
-"volver a configurar sus conexiones de red y a Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenido al asistente para la configuraciĂłn de la red\n"
-"\n"
-"Estamos a punto de configurar su conexiĂłn de red/Internet.\n"
-"Si no desea usar la detecciĂłn automĂĄtica, desmarque la casilla.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Elija el perfil a configurar"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar detecciĂłn automĂĄtica"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detectando los dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "ConexiĂłn normal por mĂłdem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectada en el puerto %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ConexiĂłn RDSI"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectada %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ConexiĂłn ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectada en la interfaz %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "ConexiĂłn por cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detectada conexiĂłn por cable"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "ConexiĂłn a la red local"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "tarjeta(s) de red detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Elija la conexiĂłn que desea configurar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Ha configurado mĂşltiples formas de conectarse a Internet.\n"
-"Seleccione la que quiere utilizar.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "ConexiĂłn a Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "ÂżDesea iniciar su conexiĂłn al arrancar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "ConfiguraciĂłn de la red"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "La red necesita ser reiniciada"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"OcurriĂł un problema mientras se reiniciaba la red: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Felicidades, la configuraciĂłn de la red y de Internet ha terminado.\n"
-"\n"
-"Ahora se aplicarĂĄ la configuraciĂłn a su sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"DespuĂŠs de esto, se recomienda que reinicie su entorno X\n"
-"para evitar el problema del cambio del nombre de la mĂĄquina."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Ocurrieron problemas durante la configuraciĂłn.\n"
-"Verifique su conexiĂłn con net_monitor o mcc. Si su conexiĂłn no funciona, "
-"puede que desee volver a iniciar la configuraciĂłn"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ADVERTENCIA: Previamente se ha configurado este dispositivo para conectarse "
-"con Internet.\n"
-"Simplemente acepte para mantener la configuraciĂłn del dispositivo.\n"
-"Al modificar los campos de abajo se ignorarĂĄ esta configuraciĂłn."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Por favor, introduzca la direcciĂłn IP de esta mĂĄquina.\n"
-"Cada valor tiene que introducirse como una direcciĂłn IP en notaciĂłn\n"
-"decimal con puntos (por ejemplo: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurando el dispositivo de red %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "DirecciĂłn IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "MĂĄscara de red"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "DirecciĂłn IP automĂĄtica"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Las direcciones IP deben estar en el formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Por favor, defina el nombre de su mĂĄquina.\n"
-"El nombre de su mĂĄquina deberĂ­a ser un nombre de mĂĄquina clasificado "
-"completamente,\n"
-"como \"mimaquina.milabo.micompa.com\".TambiĂŠn puede introducir la direcciĂłn "
-"IP de la pasarela si tiene una"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Pasarela de red (ej %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela de red"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "ConfiguraciĂłn de los proxies"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Id tarjeta de red (Ăştil para portĂĄtiles)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "El nombre del proxy debe ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "El nombre del proxy debe ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "ConfiguraciĂłn de Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "ÂżDesea intentar conectarse a Internet ahora?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Probando su conexiĂłn..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Ahora no estĂĄ conectado a Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Por motivos de seguridad, ahora serĂĄ desconectado."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"El sistema no parece estar conectado al Internet.\n"
-"Intente volver a configurar su conexiĂłn."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "ConfiguraciĂłn de la conexiĂłn"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Por favor, complete o verifique el campo de abajo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ de la tarjeta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoria (DMA) de la tarjeta"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "E/S de la tarjeta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "E/S_0 de la tarjeta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "E/S_1 de la tarjeta"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Su nĂşmero de telĂŠfono personal"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nombre del proveedor (ej proveedor.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "NĂşmero de telĂŠfono del proveedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 del proveedor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 del proveedor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Elija su paĂ­s"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de marcaciĂłn"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Velocidad de la conexiĂłn"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Demora de la conexiĂłn (en seg)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Usuario de la cuenta (nombre de usuario)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "ContraseĂąa de la cuenta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "mount fallĂł: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "La particiĂłn extendida no estĂĄ disponible en esta plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Tiene un hueco en la tabla de particiones, pero no se puede usar.\n"
-"La Ăşnica soluciĂłn es desplazar sus particiones primarias para que el hueco "
-"estĂŠ despuĂŠs de las particiones extendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "FallĂł la restauraciĂłn a partir del archivo %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Archivo de respaldo incorrecto"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Error al escribir en el archivo %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"EstĂĄ ocurriendo algo malo en su disco. \n"
-"Ha fallado una prueba para verificar la integridad de los datos. \n"
-"Esto significa que escribir cualquier cosa en el disco terminarĂĄ produciendo "
-"basura al azar"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "necesario"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "muy bueno"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bueno"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "quizĂĄs"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-"CUPS - Common Unix Printing System (Sistema de impresiĂłn comĂşn de Unix)"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR de nueva generaciĂłn"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon (Demonio de impresora de lĂ­neas)"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Imprimir, no encolar)"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Impresora en un servidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Impresora en un servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impresora de red (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora en un servidor SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Impresora en un servidor NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Introduzca el URI del dispositivo de impresiĂłn"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Filtrar el trabajo en un comando"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modelo desconocido"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Impresoras locales"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Impresoras remotas"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " en el puerto paralelo \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", impresora USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", dispositivo multifunciĂłn en puerto paralelo \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", dispositivo multi-funciĂłn en USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositivo multifunciĂłn en HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", dispositivo multifunciĂłn"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", imprimiendo en %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr " en servidor LDP \"%s\", impresora \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", puerto \"%s\""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr " en servidor Windows \"%s\", compartida como \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "en servidor Novell \"%s\", impresora \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", usando comando %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Impresora \"en crudo\" (sin controlador)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(en %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(en esta mĂĄquina)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "En servidor CUPS \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Por defecto)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Seleccione la conexiĂłn de la impresora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "ÂżComo estĂĄ conectada la impresora?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"AquĂ­ no tiene que configurar las impresoras en los servidores CUPS remotos; "
-"las mismas se detectarĂĄn automĂĄticamente."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "ConfiguraciĂłn de CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Especificar servidor CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Para obtener acceso a las impresoras en servidores CUPS remotos en su red "
-"local nada tiene que configurar; los servidores CUPS le informan a su "
-"mĂĄquina automĂĄticamente sobre sus impresoras. En la secciĂłn \"Impresoras "
-"remotas\" de la ventana principal de Printerdrake se listan todas las "
-"impresoras que su mĂĄquina conoce. Cuando CUPS no estĂĄ en la red local, tiene "
-"que ingresar la direcciĂłn IP del servidor CUPS y, opcionalmente, el nĂşmero "
-"de puerto para obtener la informaciĂłn de la impresora desde el servidor, de "
-"lo contrario, deje los campos en blanco."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalmente, CUPS se configura automĂĄticamente de acuerdo con su\n"
-"entorno de red, para que pueda acceder a las impresoras de los\n"
-"servidores CUPS de su red local. Si esto no funciona correctamente,\n"
-"desactive la \"ConfiguraciĂłn automĂĄtica de CUPS\" y edite manualmente\n"
-"su archivo /etc/cups/cupsd.conf. No olvide reiniciar CUPS tras esto\n"
-"(comando: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Las direcciones IP deberĂ­an parecerse a 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "ÂĄEl nĂşmero de puerto debe ser un nĂşmero entero!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP del servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Puerto"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "ConfiguraciĂłn automĂĄtica de CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Detectando dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Probar puertos"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "AĂąadir una impresora nueva"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Bienvenido al asistente de configuraciĂłn de la impresora\n"
-"\n"
-"Este asistente le permite instalar impresoras locales o remotas para usarlas "
-"desde esta mĂĄquina y tambiĂŠn desde otras mĂĄquinas de la red.\n"
-"\n"
-"Se le solicitarĂĄ la informaciĂłn necesaria para configurar la impresora y "
-"darle acceso a los controladores de todas las impresoras disponibles, "
-"opciones del controlador y tipos de conexiĂłn de impresoras."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Bienvenido al asistente de configuraciĂłn de la impresora\n"
-"\n"
-"Este asistente le ayudarĂĄ a instalar su(s) impresora(s) conectada(s) a esta "
-"computadora.\n"
-"\n"
-"Por favor, conecte su(s) impresora(s) a este ordenador y enciĂŠndala(s). Haga "
-"clic en \"Siguiente\" cuando estĂŠ listo, y en \"Cancelar\" si no quiere "
-"configurar ahora su(s) impresora(s).\n"
-"\n"
-"FĂ­jese en que algunas computadoras pueden colgarse durante la detecciĂłn "
-"automĂĄtica de la impresora. En este caso, desactive \"Detectar las "
-"impresoras automĂĄticamente\" para hacer una instalaciĂłn sin detecciĂłn "
-"automĂĄtica. Use el \"Modo experto\" de printerdrake si quiere configurar la "
-"impresiĂłn en una impresora remota si printerdrake no la lista "
-"automĂĄticamente."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "DetecciĂłn automĂĄtica de impresoras"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Enhorabuena, su impresora estĂĄ instalada y configurada.\n"
-"\n"
-"Puede imprimir usando el comando \"Imprimir\" de su aplicaciĂłn (normalmente "
-"se encuentra en el menĂş \"Archivo\").\n"
-"\n"
-"Si quiere aĂąadir, borrar o renombrar una impresora, o si quiere cambiar las "
-"opciones de configuraciĂłn por defecto (bandeja de entrada de papel, calidad "
-"de impresiĂłn, ...), seleccione \"Impresora\" en la secciĂłn de \"Hardware\" "
-"del Centro de control de Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "AutodetecciĂłn de impresoras."
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake puede detectar automĂĄticamente sus impresoras de puerto "
-"paralelo y USB conectadas localmente, pero fĂ­jese en que en algunos sistemas "
-"esto PUEDE COLGAR EL SISTEMA E INCLUSO CORROMPER SUS SITEMAS DE ARCHIVOS. "
-"Entonces, HÁGALO BAJO SU PROPIO RIESGO.\n"
-"\n"
-"ÂżSeguro que desea detectar automĂĄticamente sus impresoras?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Realizar detecciĂłn automĂĄtica"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Configurar la impresora manualmente"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Detectada %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Impresora en puerto paralelo \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Impresora USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"No se encontrĂł ninguna impresora local. Para instalar una manualmente, "
-"introduzca un nombre de dispositivo/nombre de archivo en la lĂ­nea de entrada "
-"(Puertos paralelos: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1ÂŞ impresora USB: /dev/usb/lp0, 2ÂŞ impresora USB: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Debe introducir un dispositivo un un nombre de archivo"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"ÂĄNo se encontrarĂł ninguna impresora local!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Las impresoras en red sĂłlo se pueden instalar tras la inslaciĂłn. Seleccione "
-"\"Hardware\" y luego \"Impresora\" en el Centro de control de Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Para instalar impresoras en red, haga clic en \"Cancelar\", cambie al \"Modo "
-"experto\", y haga clic en \"AĂąadir una nueva impresora\" de nuevo."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Se detectĂł automĂĄticamente la siguiente impresora, si no es una de las que "
-"quiere configurar, introduzca en la lĂ­nea de entrada un nombre de "
-"dispositivo/nombre de archivo en la lĂ­nea de entrada"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"AquĂ­ tiene una lista de todas las impresoras detectadas automĂĄticamente. Por "
-"favor, seleccione la impresora que quiere configurar o introduzca un nombre "
-"de dispositivo/nombre de archivo en la lĂ­nea de entrada"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"La siguiente impresora se detectĂł automĂĄticamente. La configuraciĂłn de la "
-"impresora se harĂĄ de forma totalmente automatizada. Si su impresora no se "
-"detectĂł correctamente o si prefiere una configuraciĂłn personalizada, active "
-"la \"ConfiguraciĂłn manual\"."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"AquĂ­ tiene una lista de las impresoras detectadas automĂĄticamente. Por "
-"favor, seleccione la impresora que quiera configurar. La configuraciĂłn de la "
-"impresora se harĂĄ de forma totalmente automatizada. Si su impresora no se "
-"detectĂł correctamente o si prefiere una configuraciĂłn personalizada, active "
-"la \"ConfiguraciĂłn manual\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Por favor, elija el puerto donde estĂĄ conectada su impresora o ingrese el "
-"nombre de un dispositivo o archivo en la lĂ­nea de entrada"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Por favor, elija el puerto al que estĂĄ conectado su impresora."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(Puertos paralelo: /dev/lp0, /dev/lp1, ..., equivalen a LPT1:, LPT2, ..., "
-"1er impresora USB: /dev/usb/lp0, 2da impresora USB: /dev/usb/lp1, ...) "
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "ÂĄDebe elegir/ingresar una impresora o un dispositivo!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "ConfiguraciĂłn manual"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"ÂżEs su impresora un dispositivo multifunciĂłn de HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 con escĂĄner)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Instalando el paquete HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Verificando el dispositivo y configurando HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Instalando el paquete SANE..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Escaneando en su dispositivo multifunciĂłn de HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Haciendo que el puerto de impresora estĂŠ disponible para CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Leyendo base de datos de impresoras ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opciones de la impresora remota lpd"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para utilizar impresora LPD remota, necesita proporcionar el nombre de host "
-"del servidor de impresiĂłn y el nombre de la impresora en ese servidor."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nombre de host del servidor remoto"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nombre de la impresora remota"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "ÂĄFalta el nombre del host remoto!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "ÂĄFalta el nombre de la impresora remota!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opciones de la impresora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir en una impresora SMB, necesita proporcionar el nombre del "
-"servidor SMB (ÂĄNote que puede ser diferente al nombre de hostTCP/IP del "
-"mismo!) y posiblemente la direcciĂłn IP del servidor de impresiĂłn, asĂ­ como "
-"el nombre del recurso compartido para la impresora que se quiere usar y "
-"cualquier otra informaciĂłn del nombre de usuario, contraseĂąa y grupo de "
-"trabajo que haga falta."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "MĂĄquina del servidor SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nombre del recurso compartido"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de trabajo"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "ÂĄDebe indicar el nombre o la direcciĂłn IP del servidor!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "ÂĄNo se encuentra el nombre del recurso compartido de Samba!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "ÂĄADVERTENCIA DE SEGURIDAD!"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"EstĂĄ a punto de configurar la impresiĂłn a una cuenta Windows con contraseĂąa. Debido a una falla en la arquitectura del cliente Samba la contraseĂąa se pone como texto plano en la lĂ­nea de comandos del cliente Samba que se usa para transmitir el trabajo de impresiĂłn al servidor Windows. Por lo tanto, es posible que cada usuario de esta mĂĄquina vea la clave en pantalla ejecutando \"ps auxwww\".\n"
-"\n"
-"Recomendamos utilizar alguna de las alternativas siguientes (en todos los casos tiene que asegurarse que sĂłlo las mĂĄquinas de su red local tienen acceso al servidor Windows, por ejemplo utilizando un cortafuegos):\n"
-"\n"
-"Usar una cuenta sin contraseĂąa en su servidor Windows, por ej. la cuenta \"GUEST\" o una cuenta especial dedicada a la impresiĂłn. No quite la protecciĂłn con contraseĂąa de una cuenta personal o de la cuenta del administrador.\n"
-"\n"
-"Configure a su servidor Windows para que la impresiĂłn estĂŠ disponible bajo el protocolo LPD y configure la impresiĂłn desde esta mĂĄquina bajo el tipo de conexiĂłn \"%s\" en PrinterDrake.\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr "Configure a su servidor Windows para que la impresiĂłn estĂŠ disponible bajo el protocolo IPP y configure la impresiĂłn desde esta mĂĄquina bajo el tipo de conexiĂłn \"%s\" en PrinterDrake.\n\n"
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Conecte su impresora a un servidor Linux y permita que su(s) mĂĄquina(s) Windows se conecten al mismo como un cliente.\n"
-"\n"
-"ÂżRealmente desea continuar configurando esta impresora como lo estĂĄ haciendo?"
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opciones de la impresora NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir en una impresora NetWare, es necesario escribir el nombre del "
-"servidor de impresiĂłn NetWare (ÂĄNote que puede no ser el mismo que el nombre "
-"de la mĂĄquina en TCP/IP) asĂ­ como el nombre de la cola de impresiĂłn que "
-"desea usar y el nombre de usuario y la contraseĂąa apropiados."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de impresiĂłn"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nombre de la cola de impresiĂłn"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "ÂĄNo se encuentra el nombre del servidor NCP!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "ÂĄNo se encuentra la cola del servidor NCP!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Opciones de la impresora por socket/TCP"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir en una impresora por socket o TCP, necesita proporcionar el "
-"nombre de host de la impresora y opcionalmente el nĂşmero de puerto. En "
-"servidores HP JetDirect el nĂşmero de puerto por lo general es 9100, en otros "
-"servidores puede variar. Consulte el manual de su hardware."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nombre de host de la impresora"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "ÂĄNo se encuentra el nombre de la mĂĄquina de la impresora!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI del dispositivo de impresiĂłn"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Puede especificar directamente el URI para acceder a la impresora. El URI "
-"debe cumplir con las especificaciones Foomatic o CUPS. Recuerde que no todos "
-"los sistemas de impresiĂłn admiten URIs."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "ÂĄDebe introducir un URI vĂĄlido!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Cada impresora necesita un nombre (por ejemplo, \"impresora\"). No tiene por "
-"quĂŠ rellenar los campos DescripciĂłn ni UbicaciĂłn. Son comentarios para los "
-"usuarios."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nombre de la impresora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "DescripciĂłn"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "UbicaciĂłn"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Preparando base de datos de impresoras ..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "El modelo de su impresora"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake ha comparado el modelo que resultĂł de la detecciĂłn automĂĄtica "
-"con los modelos listados en su base de datos de impresoras para encontrar la "
-"mejor coincidencia. Esta elecciĂłn puede estar equivocada, especialmente si "
-"su impresora no estĂĄ listada en absoluto en la base de datos. Entonces, "
-"verifique si la elecciĂłn es correcta y haga clic en \"El modelo es correcto"
-"\" , caso contrario, haga clic en \"Seleccionar el modelo manualmente\" de "
-"forma tal que pueda elegir el modelo de su impresora manualmente en la "
-"pantalla siguiente.\n"
-"\n"
-"Para su impresora Printerdrake ha encontrado:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "El modelo es correcto"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Seleccionar el modelo manualmente"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "SelecciĂłn del modelo de impresora"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "ÂżQuĂŠ modelo de impresora tiene?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Por favor, verifique que Printerdrake hizo correctamente la detecciĂłn "
-"automĂĄtica del modelo de su impresora. Busque el modelo correcto en la lista "
-"si el cursor estĂĄ sobre un modelo equivocado o si estĂĄ en \"Impresora en "
-"crudo\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si no se lista su impresora, elija una compatible (vea el manual de la "
-"misma) o una simliar."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "ConfiguraciĂłn de impresora de windows OKI"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Va a configurar una impresora laser de windows OKI. Estas impresoras\n"
-"utilizan un protocolo de comunicaciĂłn muy especial y sĂłlo funcionan cuando "
-"se conectan al primer puerto paralelo. Cuando su impresora estĂĄ conectada a "
-"otro puerto o a un servidor de impresiĂłn, por favor conĂŠctela al primer "
-"puerto paralelo antes de imprimir una pĂĄgina de prueba. De no ser asĂ­, la "
-"impresora no funcionarĂĄ. El controlador ignorarĂĄ la configuraciĂłn del tipo "
-"de conexiĂłn."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "ConfiguraciĂłn de impresora de inyecciĂłn de tinta Lexmark"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Los controladores de impresiĂłn de inkjet que proporciona Lexmark sĂłlo "
-"admiten impresoras locales, no impresoras en mĂĄquinas remotas o servidores "
-"de impresiĂłn. Por favor, conecte su impresora a un puerto local o "
-"configĂşrelo en la mĂĄquina a la que estĂĄ conectada."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Para permitir imprimir con su impresora de inyecciĂłn de tinta Lexmark y esta "
-"configuraciĂłn, necesita los controladores de impresoras de inyecciĂłn de "
-"tinta proporcionados por Lexmark (http://www.lexmark.com/). Vaya al sitio de "
-"EEUU y haga clic en el botĂłn \"Drivers\". Luego, seleccione su modelo y "
-"posteriormente \"Linux\" como sistema operativo. Los controladores vienen "
-"vienen como paquetes RPM o como scripts de la shell con instalaciĂłn grĂĄfica "
-"interactiva. No necesita hacer esta configuraciĂłn con los interfaces "
-"grĂĄficos. Cancele directamente tras el acuerdo de licencia. Luego imprima "
-"pĂĄginas alineadas con la cabeza de impresiĂłn \"lexmarkmaintain\" y ajuste la "
-"configuraciĂłn de la alineaciĂłn de la cabeza con este programa."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Configuraciones predeterminadas de la impresora\n"
-"\n"
-"DeberĂ­a asegurarse que el tamaĂąo de pĂĄgina y el tipo de tinta/modo de "
-"impresiĂłn (si corresponde) y tambiĂŠn la configuraciĂłn de hardware de las "
-"impresoras lĂĄser (memoria, unidad de dĂşplex, bandejas adicionales) estĂĄn "
-"configurados correctamente. Note que una calidad de impresiĂłn o resoluciĂłn "
-"extremadamente alta puede ser bastante lenta."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "ÂĄLa opciĂłn %s debe ser un nĂşmero entero!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "ÂĄLa opciĂłn %s debe ser un nĂşmero!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "ÂĄLa opciĂłn %s estĂĄ fuera de rango"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"ÂżQuiere configurar esta impresora (\"%s\")\n"
-"como la impresora predeterminada?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "PĂĄginas de prueba"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Por favor, seleccione las pĂĄginas de prueba que quiere imprimir.\n"
-"Nota: la pĂĄgina de prueba de foto puede tardar mucho tiempo en ser impresa e "
-"incluso en impresoras lĂĄser con muy poca memoria puede que no salga. En la "
-"mayorĂ­a de los casos, basta con imprimir la pĂĄgina de prueba estĂĄndar."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "No hay pĂĄginas de prueba"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Imprimir"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "PĂĄgina de prueba estĂĄndar"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "PĂĄgina de prueba alternativa (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "PĂĄgina de prueba alternativa (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "PĂĄgina de prueba de foto"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "No imprimir ninguna pĂĄgina de prueba"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimir la(s) pĂĄgina(s) de prueba..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(s) pĂĄgina(s) de prueba se enviaron a la impresora.\n"
-"Puede que pase algo de tiempo antes de que comience la impresiĂłn.\n"
-"Estado de la impresiĂłn:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La(s) pĂĄgina(s) de prueba se enviaron al demonio de impresiĂłn.\n"
-"Puede que pase algo de tiempo antes de que comience la impresiĂłn.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "ÂżFuncionĂł adecuadamente?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Impresora en crudo"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Para imprimir un archivo desde la lĂ­nea de comando (ventana de terminal) "
-"utilice el comando \"%s <archivo>\" o una herramienta de impresiĂłn grĂĄfica: "
-"\"xpp <archivo>\" o \"kprinter <archivo>\". Las herramientas grĂĄficas le "
-"permiten seleccionar la impresora y modificar las opciones de configuraciĂłn "
-"fĂĄcilmente.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Estos comando tambiĂŠn se utilizan en el campo \"Comando de impresiĂłn\" de "
-"los diĂĄlogos de impresiĂłn de muchas aplicaciones, pero aquĂ­ no se indica el "
-"nombre del archivo porque el archivo a imprimir lo proporciona la "
-"aplicaciĂłn.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"El comando \"%s\" tambiĂŠn permite modificar las opciones de configuraciĂłn "
-"para un trabajo de impresiĂłn determinado. Simplemente, aĂąada las "
-"configuraciones deseadas a la lĂ­nea de comando, por ejemplo \"%s <archivo>"
-"\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Para obtener una lista con las opciones disponibles para la impresora actual "
-"lea la lista que se muestra debajo o haga clic en el botĂłn \"Imprimir lista "
-"de opciones\".%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"AquĂ­ tiene una lista de las opciones disponibles para la impresora actual:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la lĂ­nea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Este comando tambiĂŠn se utiliza en el campo \"Comando de impresiĂłn\" de los "
-"diĂĄlogos de impresiĂłn de muchas aplicaciones. Pero aquĂ­ no se da el nombre "
-"del archivo porque el nombre del archivo a imprimir lo proporciona la "
-"aplicaciĂłn.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Para obtener una lista de las opciones disponibles para la impresora actual, "
-"haga clic en el botĂłn \"Imprimir lista de opciones\"."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Para imprimir un archivo desde la lĂ­nea de comando (ventana de terminal) use "
-"el comando \"%s <archivo>\" o \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"TambiĂŠn puede utilizar el interfaz grĂĄfico \"xpdq\" para configurar las "
-"opciones y manipular los trabajos de impresiĂłn.\n"
-"Si estĂĄ usando KDE como entorno de escritorio tiene un \"botĂłn de pĂĄnico\", "
-"un icono en su escritorio etiquetado como \"ÂĄDETENER impresora!\", que "
-"detiene todos los trabajos de impresiĂłn inmediatamente cuando hace clic en "
-"ĂŠl. Esto es Ăştil, por ejemplo, para atascos de papel.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-" Los comandos \"%s\" y \"%s\" tambiĂŠn permiten modificar las opciones de "
-"configuraciĂłn para un trabajo de impresiĂłn particular. Simplemente aĂąada las "
-"opciones deseadas a la lĂ­nea de comando, por ejemplo \"%s <archivo>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Cerrar"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Imprimiendo/Escaneando en \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Imprimiendo en la impresora \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Imprimir lista de opciones"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Su dispositivo multifunciĂłn de HP se configurĂł automĂĄticamente para ser "
-"capaz de escanear. Ahora puede escanear con \"scanimage\" (\"scanimage -d hp:"
-"%s\" para especificar el escĂĄner si tiene mĂĄs de uno) desde la lĂ­nea de "
-"comandos o con los interfaces grĂĄficos \"xscanimage\" o \"xsane\". Si estĂĄ "
-"usando el GIMP, tambiĂŠn puede escanear seleccionado el punto apropiado del "
-"menĂş \"Archivo\"/\"Adquirir\". Lance tambiĂŠn \"man scanimage\" y \"man sane-"
-"hp\" en la lĂ­nea de comandos para obtener mĂĄs informaciĂłn.\n"
-"\n"
-"No use \"scannerdrake\" para este dispositivo."
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Su dispositivo multifunciĂłn HP se configurĂł automĂĄticamente para ser capaz "
-"de escanear. Ahora puede escanear desde la lĂ­nea comandos con \"ptal-hp %s "
-"scan ...\". No se soporta aĂşn el escaneo por medio de un interfaz grĂĄfico e "
-"desde el GIMP para su dispositivo. EncontrarĂĄ mĂĄs informaciĂłn en el archivo "
-"de su sistema \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\". Si tiene una HP "
-"LaserJet 1100 o 1200 puede escanear cuando tenga la opciĂłn del escĂĄner "
-"instalada.\n"
-"No use \"scannerdrake\" para este dispositivo."
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Leyendo los datos de la impresora ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transferir configuraciĂłn de la impresora"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Puede copiar la configuraciĂłn de la impresora que ha realizado para la cola %"
-"s a %s, su cola corriente. Todos los datos de configuraciĂłn (nombre de la "
-"impresora, descripciĂłn, ubicaciĂłn, tipo de conexiĂłn, y opciones "
-"predeterminadas) se transfieren, pero los trabajos de impresiĂłn no se "
-"transfieren.\n"
-"Debido a las siguientes razones no todas las colas se pueden transferir:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS no soporta impresoras en servidores Novell o impresoras que envĂ­an los "
-"datos en un comando formado libremente.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ sĂłlo soporta impresoras locales, impresoras LPD remotas, e impresoras "
-"Socket/TCP.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD y LPRng no soportan impresoras IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"AdemĂĄs, las colas no creadas con este programa o con \"foomatic-configure\" "
-"no se pueden transferir."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Tampoco se pueden transferir las impresoras configuradas con los archivos "
-"PPD provistos por sus fabricantes o con controladores CUPS nativos."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Marque las impresoras que desea transferir y haga clic \n"
-"sobre \"Transferir\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "No transferir impresoras"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transferir"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ya existe una impresora denominada \"%s\" bajo %s. \n"
-"Haga clic sobre \"Transferir\" para sobre-escribirla.\n"
-"TambiĂŠn puede ingresar un nombre nuevo o saltear esta impresora."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nombre de la impresora sĂłlo deberĂ­a contener letras, nĂşmeros y el guiĂłn "
-"bajo"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"La impresora \"%s\" ya existe,\n"
-"Âżrealmente desea sobre-escribir la configuraciĂłn de la misma?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nuevo nombre de la impresora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfiriendo %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Ha transferido su impresora por defecto anterior (\"%s\"), ÂżDeberĂ­a ser "
-"tambiĂŠn la impresora por defecto bajo el nuevo sistema de impresiĂłn %s?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Refrescando datos de impresora ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "ConfiguraciĂłn de una impresora remota"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Iniciando la red ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configurar la red ahora"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Funcionalidad de red no configurada"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Va a configurar una impresora remota. Para esto, se necesita un acceso a la "
-"red funcionando, pero aĂşn no ha configurado su red. Si sigue sin "
-"configuraciĂłn de red, no podrĂĄ utilizar la impresoara que estĂĄ configurando "
-"ahora. ÂżCĂłmo desea proceder?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Continuar sin configurar la red"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"La configuraciĂłn de la red hecha durante la instalaciĂłn no se puede iniciar "
-"ahora. Por favor, verifique si la red se hace accesible tras reiniciar su "
-"sistema y corrija la configuraciĂłn usando el Centro de control de Mandrake, "
-"secciĂłn \"Redes e Internet\"/\"ConexiĂłn\", y tras esto configure la "
-"impresora, tambiĂŠn utilizando el Centro de Control de Mandrake, secciĂłn "
-"\"Hardware\"/\"Impresora\"."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"El acceso a la red no estaba corriendo y no se puede iniciar. Por favor, "
-"verifique su configuraciĂłn y su hardware. Luego, intente configurar su "
-"impresora remota de nuevo."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Reiniciando el sistema de impresiĂłn ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "Alta"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "Paranoica"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instalando un sistema de impresiĂłn en el nivel de seguridad %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Va a instalar el sistema de impresiĂłn %s sobre un sistema corriendo en el "
-"nivel de seguridad %s.\n"
-"\n"
-"Este sistema de impresiĂłn ejecuta un demonio (proceso en segundo plano) que "
-"espera trabajos de impresiĂłn y los gestiona. Las mĂĄquinas remotas pueden "
-"acceder tambiĂŠn a este demonio a travĂŠs de la red, asĂ­ que es un potencial "
-"punto de ataque. Por eso, sĂłlo unos pocos demonios seleccionados se inician "
-"por defecto en este nivel de seguridad.\n"
-"\n"
-"ÂżSeguro que desea configurar la impresiĂłn para esta mĂĄquina?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Iniciar el sistema de impresiĂłn al arrancar"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"El sistema de impresiĂłn (%s) no se iniciarĂĄ automĂĄticamente cuando arranque "
-"la mĂĄquina.\n"
-"\n"
-"Es posible que el inicio automĂĄtico se desactivĂł al cambiar a un nivel de "
-"seguridad mayor, porque el sistema de impresiĂłn es un potencial punto de "
-"ataques.\n"
-"\n"
-"ÂżDesea volver a activar el inicio automĂĄtico de la impresiĂłn cuando el "
-"sistema se vuelva a encender?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Verificando software instalado..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Quitando LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Quitando LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Seleccione sistema de impresiĂłn (spooler)"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ÂżQuĂŠ sistema de impresiĂłn (spooler) desea usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "ConfiguraciĂłn la impresora \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Instalando Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opciones de impresiĂłn"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Preparando PrinterDrake ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Configurando las aplicaciones..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "ÂżDesea configurar la impresiĂłn?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Sistema de impresiĂłn: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"EstĂĄn configuradas las impresoras siguientes. Haga doble clic sobre una para "
-"cambiar sus parĂĄmetros; para hacerla la predeterminada; para ver informaciĂłn "
-"acerca de la misma o para hacer que una impresora en un servidor CUPS remoto "
-"estĂŠ disponible para Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"EstĂĄn configuradas las impresoras siguientes. Haga doble clic sobre una de "
-"ellas para modificarla, para configurarla como predeterminada, o para "
-"obtener informaciĂłn sobre la misma."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Refrescar la lista de impresoras (para visualizar todas las impresoras CUPS "
-"remotas)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Cambiar el sistema de impresiĂłn"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modo normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "ÂżDesea configurar otra impresora?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modificar configuraciĂłn de la impresora"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Impresora %s\n"
-"ÂżQuĂŠ desea modificar de esta impresora?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "ÂĄHacerlo!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tipo de conexiĂłn de la impresora"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nombre de la impresora, descripciĂłn, ubicaciĂłn"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Fabricante de la impresora, modelo, controlador"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Fabricante de la impresora, modelo"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Poner esta impresora como predeterminada"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Agregar esta impresora a Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Quitar esta impresora de Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Imprimir la(s) pĂĄgina(s) de prueba"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Se sabe cĂłmo usar esta impresora"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Borrar impresora"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Borrando la impresora antigua \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Impresora predeterminada"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "La impresora \"%s\" ahora es la impresora predeterminada."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Agregando impresora a Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"La impresora \"%s\" se agregĂł satisfactoriamente a Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "No se pudo agregar la impresora \"%s\" a Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Quitando la impresora de Star Office/OpenOffice.org"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"La impresora \"%s\" se quitĂł satisfactoriamnete de Star Office/OpenOffice."
-"org."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "No se pudo quitar la impresora \"%s\" de Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ÂżSeguro que quiere borrar la impresora \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Borrando la impresora \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "ConfiguraciĂłn del proxy"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bienvenido a la herramienta de configuraciĂłn del proxy.\n"
-"\n"
-"AquĂ­ podrĂĄ configurar sus proxies http y ftp con o sin\n"
-"usuario y contraseĂąa.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Por favor, rellene las informaciones del proxy http.\n"
-"DĂŠjelo en blanco si no quiere un proxy http."
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "puerto"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "La Url deberĂ­a empezar por 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "La parte del puerto deberĂ­a ser numĂŠrica"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Por favor, rellene las informaciones del proxy ftp.\n"
-"DĂŠjelo en blanco si no quiere un proxy ftp."
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "La Url deberĂ­a empezar por 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Por favor, introduzca usuario y contraseĂąa del proxy, si es necesario.\n"
-"DĂŠjelo en blanco si no desea usuario/contraseĂąa."
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "usuario"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "contraseĂąa"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "contraseĂąa (otra vez)"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Las contraseĂąas no coinciden. ÂĄIntĂŠntelo de nuevo!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "No se puede aĂąadir una particiĂłn al RAID md%d _ya formateado_"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "No se puede escribir el archivo %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "FallĂł mkraid"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "FallĂł mkraid (ÂżquizĂĄs no estĂŠn las herramientas de raid (raidtools)?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hay suficientes particiones para un RAID de nivel %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"Lanzar el sistema de sonido ALSA (Arquitectura avanzada de sonido de Linux)"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un planificador de comandos periĂłdicos."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd se usa para monitorizar el estado de las baterĂ­as y enviar esa\n"
-"informaciĂłn a syslogd. TambiĂŠn puede usarse para apagar el equipo cuando\n"
-"la baterĂ­a estĂĄ casi descargada."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ejecuta los comandos programados por el comando at en el momento\n"
-"especificado al lanzar at, y ejecuta comandos por lotes (batch) cuando\n"
-"la carga promedio del sistema es suficientemente baja."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron es un programa UNIX estĂĄndar que ejecuta programas especificados por\n"
-"el usuario periĂłdicamente. El cron de Vixie aĂąade varias funcionalidades al "
-"cron de Unix \n"
-"bĂĄsico, incluyendo una mayor seguridad y opciones de configuraciĂłn mĂĄs "
-"potentes."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aĂąade soporte del ratĂłn para los programas Linux en modo texto, como\n"
-"el Midnight Commander. TambiĂŠn permite operaciones de cortar-y-pegar con\n"
-"el ratĂłn en la consola, e incluye soporte para menĂşes emergentes en la "
-"consola."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake lanza una prueba del hardware, y opcionalmente configura\n"
-"el hardware nuevo/cambiado."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache es un servidor de pĂĄginas web. Se usa para servir archivos HTML y "
-"programas CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El demonio para el superservidor de internet (normalmente llamado inetd) "
-"inicia\n"
-"una variedad de servicios adicionales de internet segĂşn sea necesario.\n"
-"Es el responsable de iniciar varios servicios, incluyendo telnet, ftp, rsh\n"
-"y rlogin. Al desactivar inetd, se desactivan todos los servicios que "
-"dependen de ĂŠl."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lanza el filtrado de paquetes para los nĂşcleos de Linux de la serie 2.2,\n"
-"para configurar un cortafuegos que protege a su mĂĄquina de los ataques de la "
-"red."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga la definiciĂłn de teclado que se indica en\n"
-"/etc/sysconfig/keyboard. Puede ser configurado con el programa kbdconfig.\n"
-"Debe dejarse activo en la mayorĂ­a de las mĂĄquinas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"RegeneraciĂłn automĂĄtica de la cabecera del nĂşcleo en /boot para\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "DetecciĂłn y configuraciĂłn automĂĄtica del hardware al arrancar."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf a veces realizarĂĄ varias tareas al arrancar para\n"
-"mantener la configuraciĂłn del sistema."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd es el demonio de impresiĂłn, necesario para que lpr funcione\n"
-"correctamente. BĂĄsicamente, es un servidor que coloca las tareas de\n"
-"impresiĂłn en las colas de impresiĂłn adecuadas para cada impresora."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"El servidor virtual de Linux (LVS) se usa para construir servidores de alto\n"
-"rendimiento y alta disponibilidad."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) es un servidor de nombres de dominio (DNS) usado para convertir "
-"los nombres de mĂĄquinas en direcciones IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta y desmonta todos los puntos de montaje de sistemas de archivos\n"
-"compartidos por medio de la red; como NFS (Network File System),\n"
-"SMB (Lan Manager/Windows) y NCP (Netware)"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva todas las interfaces de red configuradas para iniciarse\n"
-"en el arranque del sistema."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de servidor NFS, que se "
-"configura\n"
-"a travĂŠs del archivo /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS es un protocolo muy popular para compartir archivos en redes TCP/IP.\n"
-"Este servicio proporciona la funcionalidad de bloqueo de archivos por NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activar el bloqueo numĂŠrico automĂĄticamente bajo la consola y\n"
-"XFree al arrancar."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Admitir las win-impresoras OKI 4w y compatibles."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"El soporte PCMCIA se usa por lo general para admitir cosas como tarjetas\n"
-"de red o mĂłdems en ordenadores portĂĄtiles. No se iniciarĂĄ salvo que\n"
-"estĂŠ configurado, por lo que no es un problema tenerlo instalado\n"
-"en mĂĄquinas que no lo necesiten."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El portmapper gestiona las conexiones RPC; que usan protocolos como\n"
-"NFS y NIS. El servidor portmap se debe estar ejecutando en los sistemas que "
-"actĂşan\n"
-"como servidores para protocolos que usan el mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix es un agente de transporte de correo (MTA), es decir el programa "
-"encargado de enviar el correo electrĂłnico de una mĂĄquina a otra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Guarda y recupera el mecanismo de entropĂ­a del sistema; usado para la\n"
-"generaciĂłn de nĂşmeros aleatorios de gran calidad."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Asignar dispositivos 'crudos' a dispositivos de bloque (como las "
-"particiones\n"
-"de los discos), para usar aplicaciones como Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El demonio routed permite actualizar automĂĄticamente las tablas de "
-"enrutamiento IP\n"
-"gracias al protocolo RIP. Mientras que RIP se usa bastante en redes "
-"pequeĂąas,\n"
-"para redes mĂĄs complejas, se necesitan protocolos de enrutamiento mĂĄs "
-"complejos."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocolo rstat permite a los usuarios de una red recoger\n"
-"informaciĂłn sobre el rendimiento de cualquier mĂĄquina de dicha red."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"El protocolo rusers permite que los usuarios de una red identifiquen\n"
-"quien estĂĄ conectado en otras mĂĄquinas que respondan."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"El protocolo rwho permite que los usuarios remotos obtengan una lista\n"
-"de todos los usuarios conectados a una mĂĄquina que ejecuta el demonio rwho\n"
-"(similar al finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Lanza el sistema de sonido en su mĂĄquina"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog es el servicio a travĂŠs del que varios demonios van a enviar\n"
-"sus mensajes de registro, que syslog va a redirigir a varios archivos\n"
-"de registro(log). Es una buena idea ejecutar siempre syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Carga los controladores para sus dispositivos USB."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Inicia el servidor de tipografĂ­as X11 (obligatorio para correr XFree)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Seleccione quĂŠ servicios se deben iniciar automĂĄticamente al arrancar"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Imprimiendo"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Compartir archivos"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "AdministraciĂłn remota"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Servidor de base de datos"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servicios: %d activados de %d registrados"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Servicios"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "corriendo"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servicios y demonios"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"No hay informaciĂłn adicional para\n"
-"este servicio. Disculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Al iniciar"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Iniciar"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Parar"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Gracias por elegir Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Bienvenido al mundo del CĂłdigo Abierto (Open Source)"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"El ĂŠxito de MandrakeSoft se basa en el principio del Software Libre. Su "
-"sistema operativo es el resultado del trabajo colaborativo de parte de la "
-"Comunidad Linux mundial"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Únase al mundo del Software Libre"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Conozca a la comunidad Open Source y sea un miembro. Aprenda, enseĂąe, y "
-"ayude a otros uniĂŠndose a los foros de discusiĂłn que encontrarĂĄ en nuestras "
-"pĂĄginas web para la \"Comunidad\""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet y MensajerĂ­a"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 le brinda la mejor selecciĂłn de software para acceder a "
-"todo lo que tiene para ofrecer la Internet: Navegue la web y vea animaciones "
-"con Mozilla y Konqueror, intercambie correo-e y organice su informaciĂłn "
-"personal con Evolution y KMail, y mucho mĂĄs"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedios y GrĂĄficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"ÂĄMandrake Linux 8.2 le permitirĂĄ llevar a su computadora multimedios al "
-"lĂ­mite! Use el Ăşltimo software para reproducir mĂşsica y archivos de audio, "
-"edite y organice sus imĂĄgenes y fotos, mire TV y reproduzca vĂ­deos, y mucho "
-"mĂĄs"
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desarrollo"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 es la plataforma de desarrollo definitiva. Descubra el "
-"poder del compilador GNU gcc asĂ­ como tambiĂŠn los mejores entornos de "
-"desarrollo de CĂłdigo Abierto"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Centro de control de Mandrake"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"El Centro de Control de Mandrake Linux 8.2 es un lugar Ăşnico para "
-"personalizar y configurar su sistema Mandrake por completo"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Interfaces de usuario"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 brinda 11 entornos de escritorio grĂĄficos y "
-"administradores de ventanas distintos para elegir, incluyendo a GNOME 1.4, "
-"KDE 2.2.2, Window Maker 0.8, y otros"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Software de servidor"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Transforme su mĂĄquina en un servidor potente con unos pocos clic del ratĂłn: "
-"servidor web, de correo, cortafuegos, router, servidor de archivos e "
-"impresoras, ..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Juegos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 brinda lo mejor en juegos de CĂłdigo Abierto - arcade, "
-"acciĂłn, naipes, deportes, estrategia, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"ÂżDesea aprender Linux de manera simple, rĂĄpida, y gratis? MandrakeSoft le "
-"proporciona entrenamiento libre en Linux, asĂ­ como tambiĂŠn una manera de "
-"probar su progreso, en MandrakeCampus -- nuestro centro de entrenamiento en "
-"lĂ­nea"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"El soporte de calidad de la Comunidad Linux, y de MandrakeSoft, estĂĄ "
-"simplemente a la vuelta de la esquina. y si ya es un veterano de Linux, "
-"conviĂŠrtase en \"Experto\" y comparta su conocimiento en nuestro sitio web "
-"de soporte"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Nuestros consultores estĂĄn listos para analizar sus necesidades y ofrecerle "
-"una soluciĂłn persoanlizada para todos sus proyectos de IT. Aproveche la "
-"vasta experiencia de MandrakeSoft como productor de Linux para brindar una "
-"alternativa IT verdadera para su organizaciĂłn de negocios"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"En nuestra tienda electrĂłnica en lĂ­nea estĂĄn disponibles el rango completo "
-"de soluciones Linux, asĂ­ como tambiĂŠn ofertas especiales sobre los productos "
-"y otras \"cositas\""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Para mĂĄs informaciĂłn sobre los Servicios Profesionales de MandrakeSoft y las "
-"ofertas comerciales, por favor vea la pĂĄgina web siguiente:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Instalando paquetes..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"No se puede leer su tabla de particiones, estĂĄ demasiado deteriorada :-(\n"
-"Se intentarĂĄ ir poniendo en blanco las particiones malas"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "ÂĄError!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "No se encuentra el archivo de imagen `%s' necesario."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configurador de InstalaciĂłn AutomĂĄtica"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"EstĂĄ a punto de configurar el un disquete de InstalaciĂłn AutomĂĄtica. Esta "
-"caracterĂ­stica es algo peligrosa y debe ser utilizada con cuidado.\n"
-"\n"
-"Con esa caracterĂ­stica, podrĂĄ repetir la instalaciĂłn que ha realizado en "
-"esta computadora, y se le consultarĂĄ interactivamente en algunos pasos, para "
-"poder cambiar los valores de los mismos.\n"
-"\n"
-"Para mĂĄxima seguridad, el particionado y formateado nunca serĂĄ realizado "
-"automĂĄticamente, sin importar lo que eligiĂł durante la instalaciĂłn de esta "
-"computadora.\n"
-"\n"
-"ÂżDesea continuar?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "ConfiguraciĂłn de pasos automĂĄticos"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Por favor, elija para cada paso si desea que se repita como su instalaciĂłn, "
-"o el mismo serĂĄ manual"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Bienvenido.\n"
-"\n"
-"Los parĂĄmetros de la instalaciĂłn automĂĄticas estĂĄn disponibles en las "
-"secciones de la izquierda"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "ÂĄFelicidades!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"El disquete ha sido generado satisfactoriamente.\n"
-"Ahora puede repetir su instalaciĂłn."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "InstalaciĂłn automĂĄtica"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "AĂąadir un elemento"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Borrar el Ăşltimo elemento"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-" Reporte de DrakBackup \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" Reporte del servidor DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" Detalles del reporte de DrakBackup\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progreso total"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Respaldar archivos del sistema..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Respaldar archivos del disco rĂ­gido..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Respaldar archivos de usuario..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Progreso de respaldo del disco rĂ­gido..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Respaldar otros archivos..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"Lista de archivos envĂ­ada por FTP: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problema en la conexiĂłn FTP. No fue posible enviar sus archivos de copia "
-"de seguridad por FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Error durante el envĂ­o de correo. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "SelecciĂłn de archivos."
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Seleccione los archivos o directorios y haga clic sobre 'Agregar'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Por favor, verifique todas las opciones que necesita.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Estas opciones pueden respaldar y restaurar todos los archivos en el "
-"directorio /etc.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Respaldar archivos del sistema. (directorio /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Usar repaldo incremental (no reemplazar respaldos antiguos)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "No incluir archivos crĂ­ticos (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Con esta opciĂłn podrĂĄ restaurar cualquier versiĂłn de su\n"
-"directorio /etc."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Por favor, marque a todos los usuarios que desa incluir en la copia de "
-"respaldo"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "No incluir el cache del navegador"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Usar respaldos incrementales (no reemplazar respaldos antiguos)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Quitar los seleccionados."
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Usuarios"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Usar conexiĂłn FTP para realizar copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Por favor, ingrese el nombre o la IP del host"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Por favor, ingrese el directorio en este host para\n"
-" guardar la copia de respaldo."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Por favor, ingrese su nombre de usuario (login)"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Por favor, ingrese su contraseĂąa"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Recordar esta contraseĂąa"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "ConexiĂłn FTP"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "ConexiĂłn segura"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Usar CD/DVDROM para la copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Por favor, elija el espacio de su CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Por favor, verifique que estĂĄ utilizando un soporte CDRW"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Por favor, verifique si desea borrar su CDRW primero"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Por favor verifique si desea hacer que su\n"
-" CD arranque."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo de\n"
-" su grabadora de CD, ej: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Usar cinta para realizar respaldo"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo a utilizar para el respaldo"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Por favor, ingrese el tamaĂąo mĂĄximo\n"
-" permitido para Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Por favor, ingrese el directorio a guardar:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Usar cuota para archivos de respaldo"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Red"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Disco rĂ­gido / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "Cada hora."
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "Cada dĂ­a."
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "Cada semana."
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "Cada mes."
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Usar servidor"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Por favor, elija el intervalo de\n"
-" tiempo entre cada copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Por favor, elija el soporte\n"
-"para la copia de respaldo."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Usar el disco rĂ­gido con servidor"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Usar FTP con servidor"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Por favor, asegĂşrese que el servidor cron estĂĄ incluĂ­do entre sus servicios."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Enviar reporte por correo-e luego de cada respaldo a :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "QuĂŠ"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "DĂłnde"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "CuĂĄndo"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "MĂĄs opciones"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "ConfiguraciĂłn de Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Por favor, elija dĂłnde desea realizar la copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "en disco rĂ­gido"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "a travĂŠs de la red"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Por favor, elija quĂŠ desea respaldar"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Respaldar el sistema"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Respaldar usuarios"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Seleccionar manualmente el usuario"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Fuentes de respaldo: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Archivos del sistema:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Archivos de usuario:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Otros archivos:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Guardar en el disco en la ruta : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Guardar por FTP en el host : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nombre de usuario: %s\n"
-"\t\t en ruta: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opciones:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tNo incluir archivos del sistema\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tRespaldar usando tar y bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tRespaldar usando tar y gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Servidor (%s) incluye :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disco rĂ­gido.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Red por FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Red por SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Sin configuraciĂłn, por favor haga clic sobre el Asistente o Avanzado.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista de datos a restaurar:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista de datos corruptos:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Por favor, desmarque o quĂ­telo la prĂłxima vez."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Los archivos de respaldo estĂĄn corruptos"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr " Todos los datos seleccionados han sido "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " Recuperados satisfactoriamente en %s"
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr " ConfiguraciĂłn de la restauraciĂłn"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Se pueden restaurar los otros archivos."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista de usuarios a restaurar (sĂłlo importa la fecha mĂĄs reciente por "
-"usuario)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Respaldar los archivos del sistema anteriores a:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Por favor, elija la fecha para restaurar"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Usar el disco rĂ­gido para copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Restaurar desde el disco rĂ­gido."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-"Por favor, ingrese el directorio donde se almacenan las copias de respaldo"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Elija otro soporte desde el cual restaurar"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Otros soportes"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Restaurar archivos del sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Restaurar usuarios"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Restaurar otros"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "seleccione la ruta para restaurar (en vez de /)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Realizar respaldo nuevo antes de restaurar (sĂłlo para respaldos "
-"incrementales)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Borrar directorios de los usuarios antes de restaurar."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Restaurar todas las copias de respaldo"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "RestauraciĂłn personalizada"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Ayuda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Guardar"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Realizar copia de respaldo"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Restaurar"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Siguiente"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Por favor, realize la copia de respaldo antes de restaurarla...\n"
-" o verifique que la ruta para almacenar es correcta."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-"Error enviando correo con sendmail\n"
-" su correo-e de reporte no se enviĂł\n"
-" Por favor, configure a sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista de paquetes a instalar"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Error enviando el archivo por FTP.\n"
-" Por favor, corrija su configuraciĂłn de FTP."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Por favor, seleccione los datos a restaurar..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Por favor, seleccione el soporte para la copia de respaldo..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Por favor, elija los datos a respaldar..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"No se econtrĂł el archivo de configuraciĂłn,\n"
-" por favor haga clic sobre Asistente o Avanzado."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "En desarrollo ... por favor, espere."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Respaldar archivos del sistema"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Respaldar archivos de usuarios"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Respaldar otros archivos"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Progreso total"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "EnvĂ­o de archivos por FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Enviando archivos..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Lista de datos a incluir en el CDROM."
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Por favor, ingrese la velocidad de la grabadora de CDs"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-"Por favor, ingrese el nombre del dispositivo de su grabadora de CDs (ej: "
-"0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Por favor, verifique si desea hacer que su CD arranque."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Respaldar Ahora desde archivo de configuraciĂłn"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Ver configuraciĂłn del respaldo"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "ConfiguraciĂłn del Asistente"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "ConfiguraciĂłn avanzada"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Respaldar Ahora"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"descripciĂłn de las opciones:\n"
-"\n"
-" En este paso Drakbackup le permite cambiar:\n"
-"\n"
-" - El modo de compresiĂłn:\n"
-" \n"
-" Si marca compresiĂłn bzip2, comprimirĂĄ mejor sus datos\n"
-" que gzip (alrededor del 2-10 %).\n"
-" Por defecto, esta opciĂłn no estĂĄ marcada dado que este\n"
-" modo de compresiĂłn necesita mĂĄs tiempo (100 veces mĂĄs)\n"
-" \n"
-" - El modo de actualizaciĂłn:\n"
-"\n"
-" Esta opciĂłn actualizarĂĄ su respaldo, pero no es\n"
-" realmente Ăştil ya que necesita descomprimirlo\n"
-" antes que pueda actualizarlo.\n"
-" \n"
-" - el modo .backupignore:\n"
-"\n"
-" Al igual que cvs, Drakbackup ignorarĂĄ todas las referencias\n"
-" incluĂ­das en los archivos .backupignore de cada directorio.\n"
-" ej: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Algunos errores con sendmail son causados por\n"
-" una configuraciĂłn mala de postfix. Para resolverlo tiene\n"
-" que configurar myhostname o mydomain en /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"descripciĂłn de las opciones:\n"
-"\n"
-" - Respladar archivos del sistema:\n"
-" \n"
-"\tEsta opciĂłn permite respaldar su directorio /etc, que\n"
-"\tcontiene todos los archivos de configuraciĂłn. Por favor\n"
-"\ttenga cuidado durante la restauraciĂłn de no sobre-escribir:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Respaldar archivos de usuario:\n"
-"\n"
-"\tEsta opciĂłn permite seleccionar todos los usuarios que\n"
-"\tdesea respaldar.\n"
-"\tPara preservar espacio, se recomienda no incluir el\n"
-"\tcache del navegador web.\n"
-"\n"
-" - Respaldar otros archivos:\n"
-"\n"
-"\tEsta opciĂłn permite aĂąadir mĂĄs datos a guardar.\n"
-"\tCon el otro respaldo no es posible, por ahora,\n"
-"\tseleccionar el respaldo incremental.\t\t\n"
-" \n"
-" - Respaldo incremental:\n"
-"\n"
-"\tEl respaldo incremental es la opciĂłn mĂĄs potente.\n"
-"\tLe permite respaldar todos sus datos la primera\n"
-"\tvez, y luego sĂłlo aquellos que cambiaron.\n"
-"\tLuego, podrĂĄ, durante la etapa de restauraciĂłn,n\trestaurar sus datos "
-"desde una fecha especificada.\n"
-"\t\n"
-"\tSi no ha seleccionado esta opciĂłn todos los\n"
-"\trespaldos antiguos se borran antes de volver a respaldar.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"descripciĂłn de la restauraciĂłn:\n"
-" \n"
-"SĂłlo se utilizarĂĄ la fecha mĂĄs reciente, ya que con respaldos\n"
-"incrementales sĂłlo es necesario restaurar de uno de los antiguos.\n"
-"\n"
-"Por lo tanto, si no desea restaurar un usuario, por favor desmarque\n"
-"su casilla.\n"
-"\n"
-"En caso contrario, sĂłlo puede seleccionar alguno de ĂŠstos\n"
-"\n"
-" - Respaldos incrementales:\n"
-"\n"
-"\tEl respaldo incremental es la opciĂłn mĂĄs potente.\n"
-"\tLe permite respaldar todos sus datos la primera\n"
-"\tvez, y luego sĂłlo aquellos que cambiaron.\n"
-"\tLuego, podrĂĄ, durante la etapa de restauraciĂłn,\n"
-"\trestaurar sus datos desde una fecha especificada.\n"
-"\tSi no ha seleccionado esta opciĂłn todos los\n"
-"\trespaldos antiguos se borran antes de volver a respaldar...\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft por DUPONT Sebastien <dupont_s\\@epita.fr>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" _____________________\n"
-"\n"
-"DescripciĂłn:\n"
-"\n"
-" Drakbackup se usa para respaldar su sistema.\n"
-" Durante la configuraciĂłn puede seleccionar:\n"
-"\t- Archivos del sistema,\n"
-"\t- Archivos de usuarios,\n"
-"\t- Otros archivos.\n"
-"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
-"\n"
-" Drakbackup le permite respaldar su sistema sobre:\n"
-"\t- Disco rĂ­gido.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cinta.\n"
-"\n"
-" Drakbackup le permite restaurar su sistema a un\n"
-" directorio seleccionado por el usuario.\n"
-"\n"
-" Predeterminadamente se almacenarĂĄn los respaldos en su\n"
-" directorio /var/drakbackup.\n"
-"\n"
-" Archivo de configuraciĂłn:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Paso de restauraciĂłn:\n"
-" \n"
-" Durante la restauraciĂłn, DrakBackup quitarĂĄ su \n"
-" directorio original y verificarĂĄ que todos \n"
-" los archivos de respaldo no estĂŠn corruptos. Se \n"
-" recomienda que haga un Ăşltimo respaldo antes de restaurar.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"descricpiĂłn de las opciones:\n"
-"\n"
-"Por favor, tenga cuidado cuando use respaldos por ftp, porque\n"
-"sĂłlo los respaldos ya hechos se envĂ­an al servidor.\n"
-"Por el momento, necesita realizar el respaldo en su disco rĂ­gido\n"
-"antes de enviarlo al servidor.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problemas durante la restauraciĂłn:\n"
-"\n"
-"Durante el paso de restauraciĂłn, Drakbackup verificarĂĄ todos los\n"
-"archivos de respaldo antes de restaurarlos.\n"
-"Antes de la restuaraciĂłn, Drakbackup quitarĂĄ el\n"
-"directorio original, y perderĂĄ todos los datos en el mismo.\n"
-"Es importante ser cuidadoso y no modificar los archivos de\n"
-"datos de respaldo a mano.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"DescripciĂłn:\n"
-"\n"
-" Drakbackup se usa para respaldar su sistema.\n"
-" Durante la configuraciĂłn puede seleccionar:\n"
-"\t- Archivos del sistema,\n"
-"\t- Archivos de usuarios,\n"
-"\t- Otros archivos.\n"
-"\to Todo su sistema ... y Otros (como Particiones Windows)\n"
-"\n"
-" Drakbackup le permite respaldar su sistema sobre:\n"
-"\t- Disco rĂ­gido.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (con autoboot, rescue y autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cinta.\n"
-"\n"
-" Drakbackup le permite restaurar su sistema a un\n"
-" directorio seleccionado por el usuario.\n"
-"\n"
-" Por defecto, se almacenarĂĄn los respaldos en su\n"
-" directorio /var/lib/drakbackup.\n"
-"\n"
-" Archivo de configuraciĂłn:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Paso de restauraciĂłn:\n"
-" \n"
-" Durante la restauraciĂłn, DrakBackup quitarĂĄ su \n"
-" directorio original y verificarĂĄ que todos \n"
-" los archivos de respaldo no estĂŠn corruptos. Se \n"
-" recomienda que haga un Ăşltimo respaldo antes de restaurar.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "FallĂł la instalaciĂłn de %s. OcurriĂł el siguiente error:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Buscar tipografĂ­as instaladas"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Desmarcar las tipografĂ­as instaladas"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "analizar todas las tipografĂ­as"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "no se encontraron tipografĂ­as"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "hecho"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "no se pueden encontrar tipografĂ­as en las particiones montadas"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Volver a seleccionar tipografĂ­as correctas"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "no se pueden encontrar tipografĂ­as.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Buscar tipografĂ­as en la lista de instaladas"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copiar tipografĂ­as"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "InstalaciĂłn de tipografĂ­as True Type"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "por favor, espere mientras corre ttmkfdir..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "InstalaciĂłn de True Type realizada"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "ConversiĂłn de tipografĂ­as"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "Construyendo Type1"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Referenciando a Ghostscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ConversiĂłn de tipografĂ­as TTF"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "ConversiĂłn de tipografĂ­as PFM"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Suprimir archivos temporales"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Reiniciar XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Suprimir archivos de tipografĂ­as"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "Reiniciar XFS"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Antes de instalar cualquier tipografĂ­a, asegĂşrese que tiene derecho de "
-"usarlas\n"
-"e instalarlas en su sistema.\n"
-"\n"
-"-Puede instalar las tipografĂ­as usando la manera normal. En casos raros,\n"
-"puede ser que tipografĂ­as \"falsas\" congelen a su servidor X."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "ImportaciĂłn de tipografĂ­as"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Obtener tipografĂ­as de Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Desinstalar tipografĂ­as"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Opciones avanzadas"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Lista de tipografĂ­as"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Elija las aplicaciones que soportarĂĄn las tipografĂ­as:"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Impresoras genĂŠricas"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Seleccione el archivo o directorio de tipografĂ­as y haga clic sobre 'Agregar'"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instalar lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "haga clic aquĂ­ si estĂĄ seguro."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "aquĂ­ si no lo estĂĄ."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Deseleccionar todas."
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Seleccionar todas."
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Quitar lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Pruebas iniciales"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copiar tipografĂ­as en su sistema"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instalar y convertir tipografĂ­as"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-instalaciĂłn"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Quitar tipografĂ­as de su sistema"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-desinstalaciĂłn"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Compartir la conexiĂłn a Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ activada ahora"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuraciĂłn de la conexiĂłn compartida a Internet.\n"
-"Ahora estĂĄ activa.\n"
-"\n"
-"ÂżQuĂŠ desea hacer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "rechazar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Desactivando los servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ inactiva."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ desactivada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Ya se ha realizado la configuraciĂłn de la conexiĂłn compartida a Internet.\n"
-"Ahora estĂĄ inactiva.\n"
-"\n"
-"ÂżQuĂŠ desea hacer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Activando los servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Ahora, la conexiĂłn compartida a Internet estĂĄ activa."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Puede configurar su ordenador para compartir su conexiĂłn a Internet.\n"
-"Con esta caracterĂ­stica, otras mĂĄquinas de su red local podrĂĄn usar la "
-"conexiĂłn a Internet de este ordenador.\n"
-"\n"
-"Aviso: necesita un adaptador de red dedicado para configurar una red de ĂĄrea "
-"local (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfaz %s (usando el mĂłdulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaz %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "ÂĄNo hay ningĂşn adaptador de red en su sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No se ha detectado ningĂşn adaptador de red en su sistema. Por favor, ejecute "
-"la herramienta de configuraciĂłn del hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interfaz de red"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"SĂłlo hay un adaptador de red configurado en su sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Se va a configurar su red de ĂĄrea local con ese adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Por favor, elija quĂŠ adaptador de red estarĂĄ conectado a su red de ĂĄrea "
-"local."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interfaz de red ya configurada"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"AtenciĂłn, el adaptador de red (%s) ya estĂĄ configurado.\n"
-"\n"
-"ÂżDesea volver a configurarlo automĂĄticamente?\n"
-"\n"
-"Puede hacerlo manualmente pero necesita saber lo que estĂĄ haciendo."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Volver a configurar automĂĄticamente"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Mostrar la configuraciĂłn corriente de la interfaz"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"ConfiguraciĂłn corriente de `%s':\n"
-"\n"
-"Red: %s\n"
-"DirecciĂłn IP: %s\n"
-"Atributo IP: %s\n"
-"Controlador: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Puedo mantener su configuraciĂłn corriente y asumir que ya configurĂł un "
-"servidor DHCP; en ese caso, por favor verifique que leo correctamente la Red "
-"Clase C que usĂł para su red local; no la volverĂŠ a configurar y no tocarĂŠ la "
-"configuraciĂłn de su servidor DHCP.\n"
-"\n"
-"Caso contrario, puedo volver a configurar su interfaz y (volver a)configurar "
-"un servidor DHCP por Ud.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Red Local Clase C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "IP de (este) servidor DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Volver a configurar la interfaz y el servidor DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La red local no finalizĂł con `.0', saliendo."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ÂĄSe encontrĂł un conflicto potencial de direcciones LAN en la configuraciĂłn "
-"de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "ÂĄSe detectĂł la configuraciĂłn del cortafuegos!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"ÂĄAtenciĂłn! Se ha detectado la configuraciĂłn del cortafuegos existente. Puede "
-"que necesite algĂşn ajuste manual tras la instalaciĂłn."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando los scripts, instalando el software, iniciando los servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas al instalar el paquete %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Se ha configurado todo.\n"
-"Ahora puede compartir su conexiĂłn a Internet con otros ordenadores de su red "
-"de ĂĄrea local, usando la configuraciĂłn automĂĄtica de la red (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "La configuraciĂłn ya se ha hecho, pero ahora estĂĄ desactivada."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "La configuraciĂłn ya se ha hecho, y ahora estĂĄ activada."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "No se ha configurado la conexiĂłn compartida a Internet."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "ConfiguraciĂłn de la conexiĂłn compartida a Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ÂĄBienvenido a la herramienta para compartir la conexiĂłn a Internet!\n"
-"\n"
-"%s\n"
-"\n"
-"Haga click sobre Configurar para lanzar el asistente de configuraciĂłn."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ConfiguraciĂłn de la red (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Borrar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil a borrar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nuevo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nombre del perfil a crear (el perfil nuevo se crea como copia del actual):"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nombre de la mĂĄquina: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acceso a Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Pasarela:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfaz:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Por favor, espere"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar el acceso a Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "ConfiguraciĂłn de la red local"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Controlador"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfaz"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Estado"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar la red de ĂĄrea local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Haga clic aquĂ­ para lanzar el asistente ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Asistente..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplicar"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Espere, por favor... Aplicando la configuraciĂłn"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Conectado"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "No conectado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Desconectar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"AtenciĂłn, se ha detectado otra conexiĂłn con la Internet, tal vez estĂĄ usando "
-"su red"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"No tiene configurada ninguna interfaz.\n"
-"Configure la primera haciendo clic sobre 'Configurar'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "ConfiguraciĂłn LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo de arranque"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado al arranque"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "activar ahora"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "desactivar ahora"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"TodavĂ­a no se ha configurado esta interfaz.\n"
-"Lance el asistente de configuraciĂłn en la ventana principal"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"No tiene ninguna conexiĂłn a Internet.\n"
-"Primero debe crear una haciendo clic sobre 'Configurar'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "ConfiguraciĂłn de la conexiĂłn a Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "ConfiguraciĂłn de la conexiĂłn a Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de conexiĂłn: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "ParĂĄmetros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Pasarela"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Tarjeta ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Definiendo el nivel de seguridad"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de control"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elija la herramienta que desea usar"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "CanadĂĄ (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "EEUU (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "EEUU (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "EEUU (cable-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "China (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "JapĂłn (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "JapĂłn (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europa del este"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europa del oeste"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nueva Zelanda"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "SudĂĄfrica"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Por favor,\n"
-"teclee su norma de tv y paĂ­s"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Norma de TV:"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Área:"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Buscando canales de TV, en progreso ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Buscando canales de TV"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "ÂĄNo se detectĂł tarjeta de TV!"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"No se detectĂł tarjeta de TV en su mĂĄquina. Por favor, verifique que tiene conectada correctamente una tarjeta de vĂ­deo/TV soportada por Linux.\n"
-"\n"
-"\n"
-"Puede visitar nuestra base de datos de hardware en:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [teclado]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Seleccione la distribuciĂłn de su teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "ÂżDesea que la tecla BackSpace envĂ­e un Delete en la consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Cambie el CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor, inserte el CD-ROM de la instalaciĂłn en su unidad y presione "
-"Aceptar.\n"
-"Si no lo tiene, presione Cancelar para evitar la actualizaciĂłn en vivo."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "ÂĄÂĄÂĄ No se puede iniciar la actualizaciĂłn en vivo !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Se ha realizado el cambio, pero no se harĂĄ efectivo hasta que salga"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Mostrar sĂłlo para el dĂ­a seleccionado"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Archivo/_Nuevo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Archivo/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Archivo/_Guardar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>G"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Archivo/Guardar _como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Archivo/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opciones"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opciones/Prueba"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ayuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ayuda/_Acerca de..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Usuario"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Mensajes"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Explicaciones de las herramientas de Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "buscar"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Una herramienta para ver sus archivos de registro (logs)"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "ConfiguraciĂłn"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "coincidencia"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "pero no hay coincidencias"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Elija un archivo"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendario"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contenido del archivo"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Alerta por correo/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "por favor, espere, analizando el archivo: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "ConfiguraciĂłn de alerta por correo/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Bienvenido a la herramienta de configuraciĂłn del correo/SMS.\n"
-"\n"
-"AquĂ­ podrĂĄ configurar su sistema de alerta.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "configuraciĂłn de servicios"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"RecibirĂĄ una alerta si se detiene la ejecuciĂłn de uno de los servicios "
-"seleccionados"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "configuraciĂłn de la carga"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "RecibirĂĄ una alerta si la carga es mayor que este valor"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configuraciĂłn de alerta"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configura la forma en que el sistema le alertarĂĄ"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Guardar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Seleccione el tipo de su ratĂłn, por favor."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "no se encontrĂł ningĂşn usb_serie\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "ÂżEmular el tercer botĂłn?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "se encontrĂł %s en %s, Âżconfigurarlo?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Seleccione un escĂĄner."
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "El escĂĄner %s no estĂĄ soportado"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake no pudo detectar su escĂĄner %s.\n"
-"Por favor, seleccione el dispositivo donde estĂĄ conectado su escĂĄner"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "elija el dispositivo"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"printerdrake puede configurar este escĂĄner %s.\n"
-"Puede lanzar printerdrake desde el Centro de control de Mandrake en la "
-"secciĂłn Hardware."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Su escĂĄner %s ha sido configurado.\n"
-"Ahora puede escanear documentos usando \"XSane\" en el menĂş Multimedios/GrĂĄficos."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "ConfiguraciĂłn del cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "ConfiguraciĂłn del cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Cortafuegos\n"
-"\n"
-"Ya tiene configurado un cortafuegos.\n"
-"Haga clic sobre Configurar para cambiar o quitar el cortafuegos"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Cortafuegos\n"
-"\n"
-"Haga clic sobre Configurar para configurar un cortafuegos estĂĄndar"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Elija su idioma"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Tipo de instalaciĂłn"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "DetecciĂłn del disco rĂ­gido"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "ConfiguraciĂłn del ratĂłn"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Elija su teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Seguridad"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemas de archivos"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formateo de particiones"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Elija los paquetes a instalar"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar el sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "AĂąadir un usuario"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar la red"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Servicios al inicio"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Cargador de arranque"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crear un disco de arranque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "ConfiguraciĂłn de X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Actualiz. del sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Salir de la instalaciĂłn"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"configurador de tinyfirewall\n"
-"\n"
-"Esto configura un cortafuegos personal para esta mĂĄquina Mandrake Linux.\n"
-"Para una soluciĂłn potente de cortafuegos dedicada, por favor eche un "
-"vistazo\n"
-"a la distribuciĂłn especializada MandrakeSecurity Firewall."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Ahora le preguntaremos a quĂŠ servicios quiere permitir conectarse desde\n"
-"Internet. Por favor, piense cuidadosamente las respuestas, ya que la\n"
-"seguridad de su ordenador es importante.\n"
-"Por favor, si en este momento no estĂĄ usando alguno de estos servicios,\n"
-"protĂŠjalos. ÂĄPuede cambiar esta configuraciĂłn cuando quiera\n"
-"volviendo a ejecutar esta aplicaciĂłn!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"ÂżEstĂĄ corriendo un servidor web en esta mĂĄquina que quiere que vea toda\n"
-"Internet? Si estĂĄ corriendo un servidor web al que sĂłlo necesita acceder\n"
-"desde esta mĂĄquina, aquĂ­ puede responder con seguridad NO.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"ÂżEstĂĄ corriendo un servidor de nombres en esta mĂĄquina? Si no configurĂł uno\n"
-"para entregar informaciĂłn de IP y de la zona a toda Internet, por favor\n"
-"responda no.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"ÂżDesea permitir conexiones de entrada de Secure Shell (ssh)? Este es un\n"
-"reemplazo de telnet que puede usar para la entrada al sistema. Si ahora estĂĄ "
-"usando\n"
-"telnet, definitivamente deberĂ­a cambiar a ssh. telnet no estĂĄ cifrado, por\n"
-"lo tanto algunos atacantes pueden robarle su contraseĂąa si lo usa. ssh estĂĄ\n"
-"cifrado y no permite este tipo de ataque."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"ÂżDesea permitir conexiones entrantes por telnet?\n"
-"Esto es terriblemente inseguro, como explicamos en la pantalla anterior. Es\n"
-"altamente recomendable responder No aquĂ­ y usar ssh en lugar de\n"
-"telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"ÂżEstĂĄ corriendo un servidor FTP que debe ser accesible desde Internet?\n"
-"En ese caso, es altamente recomendable que sĂłlo lo use para transferencias\n"
-"anĂłnimas. Algunos atacantes pueden robar cualquier contraseĂąa enviada por "
-"FTP,\n"
-"ya que FTP tampoco usa cifrado para transferir las contraseĂąas.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"ÂżEstĂĄ corriendo un servidor de correo? Si envĂ­a sus mensajes con pine, "
-"mutt \n"
-"o cualquier otro cliente de correo de modo texto, probablemente sĂ­.\n"
-"En caso contrario, deberĂ­a proteger esto con el cortafuegos.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"ÂżEstĂĄ corriendo un servidor POP o IMAP? Estos deberĂ­an ser\n"
-"usados para almacenar cuentas de correo no basadas en web para las\n"
-"personas en esta mĂĄquina.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Parece que estĂĄ ejecutando un nĂşcleo 2.2. Si una computadora en su casa\n"
-"o en la oficina configura su direcciĂłn IP de red automĂĄticamente\n"
-"(asignaciĂłn dinĂĄmica), debemos permitir esto. ÂżEs este el caso?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"ÂżEl reloj de su computadora estĂĄ sincronizado al reloj de otra computadora?\n"
-"Mayormente, esto es lo que usan las organizaciones con servidores Unix/"
-"Linux\n"
-"medianamente grandes para sincronizar los tiempos de conexiĂłn y cosas asĂ­.\n"
-"Si no es parte de una oficina grande y nunca escuchĂł nada acerca de esto,\n"
-"probablemente no sea su situaciĂłn."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"ConfiguraciĂłn completa. ÂżSe pueden escribir estos cambios al disco?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "No se puede abrir %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "No se puede abrir %s para escribir: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "No, no necesito DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "SĂ­, necesito DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "No, no necesito NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "SĂ­, necesito NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "No grabar"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Grabar y Salir"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Asistente para la configuraciĂłn del Cortafuegos"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "No (proteger esto de la Internet detrĂĄs del cortafuegos)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "SĂ­ (permitir esto a travĂŠs del cortafuegos)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Espere por favor... Verificando los paquetes instalados"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Fallo instalando los paquetes necesarios: %s y Bastille.\n"
-" Intente instalarlos a mano."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Servidor, Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Computadora de Red (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, servidor SMB, servidor proxy, servidor SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "EstaciĂłn de trabajo GNOME"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Herramientas para su Palm Pilot o su Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "EstaciĂłn de trabajo"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Servidor, Cortafuegos/Router"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Servidor de InformaciĂłn de Red y de Nombres de Dominio"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de Oficina: procesadores de palabras (kword, abiword), plantillas "
-"de cĂĄlculo (kspread, gnumeric), visualizadores PDF, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Herramientas de audio: reproductores mp3 o midi, mezcladores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libros y COMOs sobre Linux y Software Libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "EstaciĂłn de trabajo KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedios - VĂ­deo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conjunto de herramientas para correo, noticias, web, transferencia de "
-"archivos, y chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Servidor, Bases de Datos"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de base de datos PostgreSQL o MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Herramientas para facilitar la configuraciĂłn de su computadora"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedios - Sonido"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitarios"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "DocumentaciĂłn"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Herramientas para la consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Servidor de correo Postfix, servidor de noticias Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "EstaciĂłn Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "EstaciĂłn Multimedios"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "ConfiguraciĂłn"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "MĂĄs escritorios grĂĄficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"El K Desktop Environment, el entorno grĂĄfico bĂĄsico con una colecciĂłn de "
-"herramientas que lo acompaĂąan"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Entorno grĂĄfico"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache y Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Herramientas para crear y grabar CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "EstaciĂłn de trabajo de Oficina"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas grĂĄficos, tales como El Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Bibliotecas de desarrollo C y C++, programas y archivos *.h"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Computadora servidor de red"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Servidor, Correo/Groupware/Noticias"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "EstaciĂłn de Juegos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductores y editores de vĂ­deo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedios - GrĂĄficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de entretenimiento: arcade, tableros, estrategia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conjunto de herramientas para leer y enviar correo y noticiar (pine, mutt, "
-"tin...) y para navegar por la Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivado, emuladores, monitoreo"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzas personales"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Entorno grĂĄfico con un conjunto de herramientas de escritorio y aplicaciones "
-"amigables"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clientes para los distintos protocolos incluyendo a ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Pasarela de acceso a Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas de reproducciĂłn/ediciĂłn de sonido y vĂ­deo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Otros entornos grĂĄficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, manipulaciĂłn de archivos, terminales"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para administrar sus finanzas, tales como gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "AdministraciĂłn de la informaciĂłn personal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedios - GrabaciĂłn de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "EstaciĂłn de trabajo CientĂ­fica"
diff --git a/perl-install/share/po/et.po b/perl-install/share/po/et.po
deleted file mode 100644
index d088213a6..000000000
--- a/perl-install/share/po/et.po
+++ /dev/null
@@ -1,14194 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# Riho Kurg <rx@linux.ee>, 1999-2001.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-10-28 19:54+0200\n"
-"Last-Translator: Riho Kurg <rx@linux.ee>\n"
-"Language-Team: Estonian <et@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Seadista kőik monitorid sőltumatult"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Kasuta Xinerama laiendusi"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Seadista ainult kaart \"%s\" (%s)"
-
-#
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Mitme monitori seadistamine"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Süsteemis on vőimalik kasutada mitut monitori.\n"
-"Mida Te soovite teha?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Graafikakaart"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Valige graafikakaart"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X server"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree86 %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Millise XFree konfiguratsiooni soovite kasutada?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"XFree %s toetab Teie videokaarti ja vőib omada paremat 2D tuge."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Teie kaardi 3D graafikakiirendit toetab XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s koos 3D graafikakiirendi toega"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA VŐIB OLLA EBASTABIILNE."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s koos EKSPERIMENTAALSE 3D kiirendi toega"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Teie videokaardi 3D graafikakiirendit saab kasutada vaid koos XFree %s-ga.\n"
-"SEE ON AGA EKSPERIMENTAALNE JA VŐIB OLLA EBASTABIILNE.\n"
-"Teie kaarti toetab ka XFree %s, millel on ehk parem 2D tugi."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree sätted"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Valige graafikamälu suurus"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Valige X server"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Valige monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Kaks kriitilist suurust on ekraanisagedus, mis määrab kogu kuva\n"
-"uuendamise aja ja realaotussagedus\n"
-"\n"
-"On VÄGA TÄHTIS, et Te ei määraks siinkohal monitori, mille realaotus on\n"
-"suurem kui Teie monitor vőimaldab. Vastasel juhul vőib Teie monitor hävida.\n"
-"Kui kahtlete, valige pigem väiksem väärtus."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Realaotussagedus"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Ekraaniuuendussagedus"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Graafikakaart ei ole veel seatud"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Kuvatihedus ei ole veel seatud"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Hoiatus: testimine vőib Teie arvuti peatada"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Proovime seadistusi"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"proovige mőnd parameetrit muuta"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Tekkis mingi viga:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Jätkub %d sekundi pärast"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Kas see on őige?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tekkis mingi viga, proovige mőnd parameetrit muuta"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Kuvatihedus"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Valige kuvatihedus ja värvisügavus"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Graafikakaart: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 server: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Veel.."
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertresiim"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Näita kőike"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Kuvatihedused"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klaviatuuriasetus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiire tüüp: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiire port: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Realaotussagedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekraanisagedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Graafikakaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Graafikakaart: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Videomälu: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Värvisügavus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Kuvatihedus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 server: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 juhtprogramm: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Valmistume X-i seadistamiseks"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Mida Te soovite teha?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Muuda monitori"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Muuda graafikakaardi"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Muuda serveri parameetreid"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Muuda kuvatihedust"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Näita lisainfot"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Proovi veel"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Välju"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Säilita muutused?\n"
-"Olemasolevad sätted:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X stardib nüüd"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Teie arvutis on vőimalik käivitada X juba alglaadimisel.\n"
-"Kas soovite nii teha?"
-
-# c-format
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Muudatuste aktiveerimiseks käivitage %s uuesti"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Palun väljuge ja vajutage siis Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 värvi (8 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhat värvi (15 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhat värvi (16 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljonit värvi (24 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardit värvi (32 bitti)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB vői rohkem"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA, 640x400 sagedusel 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "SVGA, 800x600 sagedusel 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-ühilduv, 1024x768, 87 Hz vahelejätuga "
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "SVGA, 1024x768, 87 Hz vahelejätuga, 800x600, 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "SVGA, 800x600 sagedusel 60 Hz, 640x480 sagedusel 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA, 1024x768 sagedusel 60 Hz, 800x600 sagedusel 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Kőrgsageduslik SVGA, 1024x768, 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Mitmesageduslik, 1280x1024 sagedusel 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Kuvatihedus saab olla 1600x1200 sagedusel 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Partitsiooni algusesse"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Ketta algusesse (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO installimine"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Kuhu soovite alglaaduri installida"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installimine"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO tekstiresiimis"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO graafikaresiimis"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Laadimine DOS/Windowsist (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Alglaaduri peasätted"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Eelistatav alglaadur"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Alglaaduri peasätted"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Alglaadimisseade"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ei tööta vanema BIOSi korral)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompaktne"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompaktne"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Graafikamood"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Ooteaeg alglaadimisel"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Salasőna"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Salasőna (uuesti)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Piira käsurea suvandeid"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "piiratud"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Puhasta /tmp igal laadimisel"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Kui vaja, täpsusta RAM suurust (leitud %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Vőimalda mitut profiili"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Anna mälu suurus megabaitides"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Säte ``Piira käsurea suvandeid'' on ilma salasőnata mittekasutatav"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Palun proovige veel"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Salasőnad ei klapi"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Initsialiseerimisteade"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware viivitus"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Ajapiirang kerneli laadimisel"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD-lt laadimine lubatud?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF laadimine lubatud?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Vaikimisi OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Praegu on kasutusel sellised kirjed.\n"
-"Te vőite neid lisada ning olemasolevaid muuta."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Lisa"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Tehtud"
-
-#: ../../any.pm_.c:265
-#, fuzzy
-msgid "Modify"
-msgstr "Modifitseeri RAIDi"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Millisele sektorile soovite seda tősta?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Muu OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Muu OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Muu OS (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Laadefail"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Juur"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Lisada"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tabel"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Ebaturvaline"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Tähis"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Vaikimisi"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd suurus"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Eemalda kirje"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tühi kirjetähis ei ole lubatud"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Teil peab olema saaleala"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Selline tähis on juba kasutusel"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Leiti %s %s liidest"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "On Teil veel kaarte?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Kas Teil on ikka mőni %s liides?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Jah"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Info riistvara kohta"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installime juhtprogrammil %s kaardile %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(moodul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Millist %s juhtprogrammi peaksime proovima?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Mőnedel juhtudel vajab %s juhtprogramm tööks lisainformatsiooni\n"
-"kuigi tavaliselt saab ka ilma hakkama. Kas soovite eraldi parameetreid\n"
-"määratleda vői lasta juhtprogrammil ise Teie arvutit kompida? Vőib juhtuda,\n"
-"et see viib arvuti segadusse kuid ei tohiks mingit jäävat kahju teha."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Proovida niisama"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Määrake parameetrid"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nüüd vőite moodulile %s parameetreid määrata.\n"
-"Parameetrid on vormingus \"nimi=väärtus nimi2=väärtus2 ...\".\n"
-"Näiteks: \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Mooduli parameetrid:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Moodule %s laadimine ei őnnestunud.\n"
-"Kas soovite proovida parameetreid muuta?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(juba lisatud %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Salasőna on liiga lihtne"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Palun andke kasutajatunnus"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Kasutajatunnus tohib sisaldada ainult väikesi tähti, numbreid, - ja _"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "See kasutajatunnus on juba lisatud"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Lisa kasutaja"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sisesta kasutaja\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Kasutaja őige"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Pärisnimi"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Kasutajatunnus"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Käsurida"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Vaikimisi sisenemine"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Teie arvutit saab seada vaikimisi kasutaja sisenemisele.\n"
-"Kui Te seda ei soovi, valige <Katkesta>"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Valige uus vaikimisi kasutaja :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Valige palun käivitatav aknahaldur:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Teisi keeli saab valida pärast installimist"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Kőik"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Tavakasutaja"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Isetehtud"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS käivitatakse"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Valige paketid mida soovite installida"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Katkesta"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Tere tulemast, kräkkerid"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Vähene"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Tavahiir"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Kőrge"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Kőrge"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoiline"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Seda tase muudab küll süsteemi lihtsalt kasutatavaks, kui väga\n"
-"haavatavaks: ligipääsupiirangute puudumise tőttu ei peaks arvutit ühendama\n"
-"ei teiste arvutitega ega ka mitte Internetti."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Salasőnad on nüüd kasutusel, kuid vőrku ühendamine ei ole siiski soovitav."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"See on sobilik turvatase arvutile, mis ühendatakse Internetti kui klient."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr "Sellel turvatasemel vőib süsteemi kasutada Internetis ka serverina."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Süsteem on täielikult suletud. Vőrgust kasutamine on vőimalik ainult\n"
-"spetsiaalselt loodud juurdepääsuteid kasutades."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Valige turvatase"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Turvataseme seadmine"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Valige X server"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Tere tulemast! Laadimisel aitab Teid %s!\n"
-"\n"
-"Valige nimekirjast eelistatav OS,\n"
-"vaikimisi oodake %d sekundit.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tere tulemast! Laadimisel aitab Teid GRUB!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Kasutage valiku tegemiseks %c ja %c klahve"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Enter laeb Teie valiku, 'e' laseb muuta"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "suvandeid enne laadimist ja 'c' veel enam."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Valik laetakse automaatselt %d sekundi jooksul"
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "/boot on liiga täis"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Töölaud"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Startmenüü"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Kuhu soovite alglaaduri installida"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "selle kohta (veel) abi ei saa.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fail"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fail/_Välju"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle kategoriseeritud jälgimine"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle jälgimine"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tavaline jälgimine"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Traditsiooniline Gtk+ jälgimine"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Käivita alglaadimisel Aurora"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Valimisviis"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Alglaadimismood"
-
-#: ../../bootlook.pm_.c:104
-#, fuzzy, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Internetiühenduse jagamise Abimees!\n"
-"\n"
-"%s\n"
-"\n"
-"Valige Abimehe käivitamiseks ``OK''"
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Seadista"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Töömood"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Käivita X-Windows alglaadimisel"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ei taha automaatselt siseneda"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Jah, soovin automaatset sisselogimist sellele (kasutajale, keskkonnale)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ei saa lugeda faili /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutit"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minut"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundit"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Partitsioone ei saa enam lisada"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Teisi keeli saab valida pärast installimist"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Prantsusmaa"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Saksa"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Kreeka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Norra"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Vaata"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Itaalia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "seerial"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Palun tehke oma andmetest enne tagavarakoopia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lugege hoolega!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Kui soovite kasutada aboot-i, jätke palun ketta algusesse vähemalt 2048 \n"
-"sektorit vaba ruumi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Viga"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Abimees"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Valige tegevus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teil on üks suur FAT partitsioon.\n"
-"(tavaliselt kasutab sellist MS DOS/Windows)\n"
-"Soovitame teil esmalt selle suurust muuta\n"
-"(klikkige ja siis valige \"Muuda\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Palun valige partitsioon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Üksikasjad"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "ühendamine ebaőnnestus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Saaleala"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tühi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Muu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Failisüsteemi tüübid: "
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Tekita"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tüüp"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Kasutage pigem ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Kustuta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Kasutage enne \"Ühenda lahti\""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s tüübi muutmisel hävivad kőik seal olnud andmed"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Valige tegevus"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Looge uus partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Tavakasutaja > Ekspert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Ekspert > Tavakasutaja"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Tagasi"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jätkate ikkagi?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Lőpeta ilma salvestamata"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Lőpetate ilma partitsioonitabelit salvestamata?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Paiguta ise"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Kustuta kőik"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Meili informatsioon"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Kőik primaarsed partitsioonid on kasutusel"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Partitsioone ei saa enam lisada"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Et saada rohkem partitsioone, kustutage palun üks, et luua laiendatud "
-"partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Kirjuta partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Päästa partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Päästa partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Päästa partitsioonitabel"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "CD/flopi/.. autoühendamine"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Valige fail"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Tabeli tagavarakoopia ei ole sama suurusega\n"
-"Soovite jätkata?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Hoiatus"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Pange tühi flopi masinasse\n"
-"Kőik andmed sellel hävivad"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Proovin päästa partitsioonitabelit"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Meili informatsioon"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Ühenduspunkt"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Eelistused"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Muuda suurust"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Liiguta"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Vorminda"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Ühenda"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Lisa RAIDi"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Lisa LVMi"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Ühenda lahti"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Eemalda RAIDist"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Eemalda LVMist"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifitseeri RAIDi"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Kasuta loopback-ina"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Looge uus partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Algsektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Suurus (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Failisüsteemi tüüp: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Ühenduspunkt:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Eelistus: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Muuda partitsiooni tüüp"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Mis failisüsteemi soovite kasutada?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Kuhu soovite loopback-faili %s ühendada?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kuhu soovite seadme %s ühendada?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Seda ühenduspunkti ei saa eemaldada, kuna partitsioon on kasutusel.\n"
-"loopback-ina. Eemaldage enne loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Arvutan FAT failisüsteemi piire"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Muudan suurust"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "See partitsioon ei ole muudetav"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Selle partitsiooni andmetest vőiks olla tagavarakoopia"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s suuruse muutmisel hävivad sellel kőik andmed"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Valige uus suurus"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Suurus (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Millisele kettale soovite seda ümber paigutada?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Millisele sektorile soovite seda ümber paigutada?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Paigutan ümber"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Liigutan partitsiooni..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Vali olemasolev RAID, millele lisada"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "uus"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Vali olemasolev LVM, millele lisada"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM nimi?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Seda partitsiooni ei saa loopback-ina kasutada"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "loopback faili nimi:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Pärisnimi"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "See fail on juba loopback-ina kasutusel, valige mőni muu"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fail on juba olemas. Kas kasutan seda?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Mooduli parameetrid:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "seade"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "tase"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "ühiku suurus"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vaadake ette: see vőib olla ohtlik."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Mis tüüpi partitsioonid teete?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Vabandan, aga ei saa nőustuda /boot kataloogi paigutamisega kaugemale 1024-"
-"st silindrist.\n"
-"Kui kasutate LILO-t, ei tööta see sel moel, kui aga ei kasuta, ei ole Teile "
-"ka /boot vajalik"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Partitsioon, mida soovite kasutada juurkataloogi (/) hoidmiseks, asub\n"
-"füüsiliselt tagapool 1024-t silindrit ja Teil ei ole /boot partitsiooni.\n"
-"Kui plaanite kasutada LILO alglaadurit, lisage kindlasti /boot partitsioon"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Olete valinud juurpartitsiooniks (/) tarkvaralise RAID-i.\n"
-"Ilma /boot partitsioonita ei ole vőimalik sellist süsteemi laadida.\n"
-"Lisage kindlasti /boot partitsioon!"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ketta %s partitsioonitabel salvestatakse!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Muudatuste jőustamiseks vajate alglaadimist"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Partitsiooni %s vormindamisel hävivad sellel kőik andmed"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Vormindan"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Vormindan partitsiooni %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid ebaőnnestus"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Kuvatihedus: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Seade: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS kettatähis: %s (arvatavasti)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tüüp: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nimi: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Algus: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Suurus: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorit"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindrid %d kuni %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Vormindatud\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Vormindamata\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Ühendatud\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "loopback fail(id): %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partitsioonilt toimub alglaadimine\n"
-" (MS-DOS-i, mitte lilo jaoks)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Tase %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Ühiku suurus %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-kettad %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "loopback faili nimi: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Vőimalik, et on tegemist\n"
-"juhtpartitsiooniga, parem oleks\n"
-"seda mitte puutuda.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"See on eriline, alglaadimisel\n"
-"kasutatav partitsioon, mis\n"
-"vőimaldab mitme operratsioonisüsteemi\n"
-"laadimist.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Suurus: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geomeetria: %s silindrit, %s pead, %s sektorit\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-kettad %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitsioonitabeli tüüp: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "siinil %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Eelistused: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Failisüsteemi tüüp: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Salasőna on liiga lihtne (peaks olema vähemalt %d tähemärki)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Salasőnad ei klapi"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Muuda partitsiooni tüüp"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Palun valige partitsioon"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Nimeserver"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s vormindamine seadmel %s ebaőnnestus"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ei oska seadet %s vormindada tüüpi %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "viga %s lahti ühendamisel: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "lihtne"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "server"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS ei ole kasutatav alla 16MB partisioonidel"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS ei ole kasutatav alla 32MB partisioonidel"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Ühenduspunktid peavad algama kaldkriipsuga (/)"
-
-# c-format
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ühenduspunktile %s on juba üks partitsioon määratud\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Te ei saa ühenduspunkti %s jaoks LVM loogilist ketast kasutada"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "See kataloog peab jääma kokku juurfailisüsteemiga"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr "See ühenduspunkt vajab tőelist (ext2, reiserfs) failisüsteemi\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Te ei saa ühenduspunkti %s jaoks LVM loogilist ketast kasutada"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Ei ole piisavalt ruumi automaatpaigutuseks"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Seadme %s avamine kirjutamiseks ebaőnnestus: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tekkis viga: failisüsteemi loomiseks ei leitud ühtki seadet. Palun\n"
-"kontrollige oma riistvara."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Teil ei ole ühtki partitsiooni!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ülalpool on toodud kőik Teie kővakettal olemasolevad Linuxi partitsioonid\n"
-"Vaikimisi on need enamasti üsna mőistlikud. Kui teete nendes muutusi,\n"
-"pidage meeles, et kindlasti vajate juurpartitsiooni (\"/\"). Liiga väikeste\n"
-"partitsioonide puhul vőib tekkida raskusi piisava hulga tarkvara "
-"installimisel\n"
-"Kasutajate jaoks on sageli mőistlik luua eraldi \"/home\" partitsioon.\n"
-"\n"
-"\n"
-"Iga partitsiooni juures on toodud abiinfona \"Nimi\" ja \"Mahutavus\".\n"
-"\n"
-"\n"
-"\"Nimi\" koosneb kővakettatüübist, selle numbrist ja partitsiooni\n"
-"numbrist (näiteks \"hda1\").\n"
-"\n"
-"\n"
-"Kővaketta tüüp on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
-"tegemist SCSI kettaga.\n"
-"\n"
-"\n"
-"Kővaketta number on alati täht \"hd\" vői \"sd\" järel. IDE ketastel:\n"
-"\n"
-" * \"a\" - esmase IDE kontrolleri ülem,\n"
-"\n"
-" * \"b\" - esmase IDE kontrolleri alluv,\n"
-"\n"
-" * \"c\" - teisase IDE kontrolleri ülem,\n"
-"\n"
-" * \"d\" - teisase IDE kontrolleri alluv.\n"
-"\n"
-"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Nüüd saate valida, milliseid teenused peaks süsteemi laadimisel käivitama.\n"
-"\n"
-"\n"
-"Abiinfo balloonis antakse lühike kirjeldus igaühe kohta neist.\n"
-"\n"
-"Kui kavatsete oma süsteemi kasutada serverina, olge eriti tähelepanelik:\n"
-"tőenäoliselt ei soovi te käivitada mittevajalikke teenuseid."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Olete jőudnud punkti, kus peate otsustama, kuhu täpselt Mandrake Linux oma\n"
-"kővakettal paigaldada. Kui kővaketas on tühi vői kui mőni muu \n"
-"operatsioonisüsteem seda täielikult kasutab, on vaja partitsioneerida.\n"
-"Partitsioneerimine on tegevus, mille käigus tekitatakse kettale loogilised\n"
-"piirkonnad Teie uue Mandrake Linux süsteemi installimiseks.\n"
-"\n"
-"\n"
-"Kuna partitsioneerimine ei ole pööratav protsess, siis peab kogemusteta\n"
-"kasutaja olema iseäranis ettevaatlik! Selle tegevuse lihtsustamiseks ja\n"
-"vigade vähendamiseks on Teie jaoks loodudki käesolev abimees. Siiski,\n"
-"palun varuga natuke ettevalmistusaega\n"
-"\n"
-"\n"
-"Mandrake Linux jaoks on Teil vaja vähemalt kaht partitsiooni. Ühele "
-"paigutatakse\n"
-"operatsioonisüsteem ise ja teisele luuakse virtuaalmälu (saaleala e. swap).\n"
-"\n"
-"\n"
-"Kui partitsioonid on juba loodud (eelmise installi vői mőne muu vahendi\n"
-"abil), siis peate need lihtsalt Linuxi paigaldamise jaoks välja valima.\n"
-"\n"
-"\n"
-"Kui partitsioone ei ole varem loodud, peate kasutama ülalttoodud abimeest.\n"
-"Abimees hindab Teie kővaketast ja pakub järgmised valikud:\n"
-"\n"
-"* Kasuta olemasolevaid partitsioone: abimees leidis kettalt Linuxi "
-"partitsioonid.\n"
-" Kui soovite neid kasutada, valige see.\n"
-"\n"
-"\n"
-"* Puhasta kogu ketas: kui soovite alustada Mandrake Linux installimist "
-"täiesti tühjale kettale.\n"
-" Tähelepanu: kőik andmed, mis enne kettal olid, hävivad!\n"
-"\n"
-"\n"
-"* Kasuta vaba ruumi Windowsi partitsioonil: kui Microsoft Windows kasutab "
-"kogu Teie kővaketta vaba pinna,\n"
-" saate luua lisaruumi Windowsi partitsiooni suuruse muutmisel.\n"
-" Sageli on see mőistlik, kui soovite kasutada ka Windowst.\n"
-"\n"
-"* Asjatundja: kui soovite ise oma kővaketast jagada, valige see. Nii on Teil "
-"kőige rohkem vőimalusi,\n"
-" aga ka kőige rohkem ohtusid! Ärge valige seda, kui Te täpselt ei tea, mida "
-"teete."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Kőik värskelt loodud partitsioonid tuleb enne kasutamist vormindada\n"
-"ehk sinna tuleb luua failisüsteemid.\n"
-"\n"
-"\n"
-"Samuti vőib vormindada varem olemas olnud partitsioonid, kui soovite\n"
-"seal leiduvad andmed ära kustutada.\n"
-"\n"
-"\n"
-"Paneme tähele, et alati ei ole kőigi vanade partitsioonide vormindamine\n"
-"vajalik.\n"
-"Kindlasti vőib vormindada partitsioone, kus varem asus \"/\", \"/usr\"\n"
-"vői \"/var\" aga kasutajate faile sisaldav \"/home\" vőiks jääda\n"
-"alles.\n"
-"\n"
-"\n"
-"Klikkige \"OK\", kui olete vormindamiseks valmis."
-
-#: ../../help.pm_.c:404
-#, fuzzy
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Teie Mandrake Linux süsteemi hakati nüüd installima. Selleks vőib\n"
-"olenevalt Teie poolt valitud pakettide arvust ja Teie arvuti kiirusest\n"
-"kuluda mőnikümmend minutit.\n"
-"\n"
-"\n"
-"Palun veidi kannatlikkust."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nüüd peate valima partitsiooni(d), kuhu soovite Mandrake Linux installida.\n"
-"\n"
-"Partitsioon on loogiliselt eraldatud kővaketta piirkond, mille suurust\n"
-"ei ole vőimalik hiljem, töötavas süsteemis enam muuta. Samuti hävivad\n"
-"partitsiooni kustutamisel kőik sellel sisalduvad andmed.\n"
-"\n"
-"Et muuta seda tegevust lihtsamaks, on loodud Abimees, mille soovitused\n"
-"on harilikult mőistlikud.\n"
-"\n"
-"\n"
-"Partitsioonide loomiseks valige esmalt kővaketas.\n"
-"\n"
-"\n"
-"Valitud ketta partitsioneerimiseks on järgmised vőimalused:\n"
-"\n"
-" * Puhasta kőik: kustutatakse kőik olemasolevad partitsioonid sellel "
-"kettal\n"
-"\n"
-"\n"
-" * Paiguta ise: sel juhul tekitatakse Linuxi jaoks vajalikud partitsioonid "
-"vabale kettapinnale automaatselt.\n"
-"\n"
-"\n"
-" * Päästa partitsioonitabel: kui partitsioonitabel on vigastatud, vőib "
-"proovida seda parandada. \n"
-" Palun ärge sellega igaks juhuks palju arvestage.\n"
-"\n"
-"\n"
-" * Lae uuesti: kui soovite tühistada kőik enda tehtud muutused ja alustada "
-"algse partitsioonitabeliga\n"
-"\n"
-"\n"
-" * Abimees: kui soovite uue partitsioonitabeli loomisel samm-sammulist "
-"juhatust.\n"
-" Soovitav, kui ei ole varem midagi sellist teinud.\n"
-"\n"
-"\n"
-" * Taasta flopilt: kui olete varem salvestanud koopia "
-"partitsioonitabelist\n"
-" flopile, tuleb see nüüd kasuks\n"
-"\n"
-"\n"
-" * Salvesta flopile: kui soovite salvestada partitsioonitabeli flopile, "
-"et\n"
-" vajadusel oleks vőimalik sealt taastada.\n"
-"\n"
-"\n"
-" * Tehtud: kui olete partitsioneerimise lőpetanud, siis saate muutused "
-"nüüd salvestada\n"
-"\n"
-"\n"
-"Valitud partitsioonil on vőimalikud järgmised tegevused:\n"
-"\n"
-" * Ctrl-c uue partitsiooni loomine\n"
-"\n"
-" * Ctrl-d partitsiooni kustutamine\n"
-"\n"
-" * Ctrl-m ühenduspunkti seadmine"
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Teie arvuti kővakettal on rohkem kui üks Microsoft Windows partitsioon.\n"
-"Palun valige välja see, mille suurust soovite Mandrake Linux jaoks muuta.\n"
-"\n"
-"\n"
-"Teie abistamiseks on iga partitsioonidel näidatud \"Nimi Linuxis\", \"Nimi "
-"Windowsis\" ja \"Mahutavus\".\n"
-"\n"
-"\"Nimi Linuxis\" koosneb kővakettatüübist, selle numbrist ja partitsiooni\n"
-"numbrist (näiteks \"hda1\").\n"
-"\n"
-"\n"
-"Kővaketta tüüp on \"hd\" kui on tegemist IDE kettaga ja \"sd\" kui on\n"
-"tegemist SCSI kettaga.\n"
-"\n"
-"\n"
-"Kővaketta number on alati täht \"hd\" vői \"sd\" järel. IDE ketastel:\n"
-"\n"
-" * \"a\" - esmase IDE kontrolleri ülem,\n"
-"\n"
-" * \"b\" - esmase IDE kontrolleri alluv,\n"
-"\n"
-" * \"c\" - teisase IDE kontrolleri ülem,\n"
-"\n"
-" * \"d\" - teisase IDE kontrolleri alluv.\n"
-"\n"
-"SCSI ketaste puhul on \"a\" esimene, \"b\" teine ja nii edasi.\n"
-"\n"
-"\n"
-"\"Nimi Windowsis\" on täht, millega Microsoft Windows vastavat seadet\n"
-"tähistab."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Palun natuke kannatust. Selleks vőib kuluda mőnigi minut."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Palun valige \"Installimine\" kui Teie arvutis ei ole varasemat Mandrake "
-"Linux\n"
-"versiooni.\n"
-"\n"
-"\n"
-"Palun valige \"Uuendamine\" kui soovite uuendada varasemat Mandrake Linux "
-"versiooni.\n"
-"\n"
-"\n"
-"Sőltuvalt Teie GNU/Linuxi alastest teadmistest saate valida erineva tasemega "
-"installi- vői uuendusmeetodi:\n"
-"\n"
-"* Soovituslik: Te ei ole varem GNU/Linuxit installinud. Kőik tehakse "
-"lihtsaks ja esitatakse vähe küsimusi\n"
-"\n"
-"\n"
-"* Isetehtud: Olete Linuxiga tuttav ja soovite süsteemi kohandada vastavalt\n"
-" Teie vajadustele. Järgmisena saate teha valikud sőltuvalt Teie arvuti \n"
-" edaspidisest kasutusalast.\n"
-"\n"
-"\n"
-"* Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-" süsteemi, mis sobiks nagu valatult Teie täpsete ootustega.\n"
-" Aga palun, palun: ÄRGE VALIGE SEDA, KUI TE TÄPSELT EI TEA, MIDA TEETE!"
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Palun valige őige port. Näiteks MS Windows-i COM1 kannab GNU/Linuxis\n"
-"nime ttyS0."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (ehk LInux LOader) ja Grub on alglaadurid: nad vőimaldavad laadida\n"
-"kas GNU/Linuxi vői mőne muu Teie arvutis olevad operatsioonisüsteemi.\n"
-"Tavaliselt tuvastakse teised operatsioonisüsteemid őigesti ja seadistatakse\n"
-"ka alglaadur. Kui Teil aga ei ole őnne, tuleb parameetrid seada\n"
-"käsitsi. Olge sel juhul hoolas valima őiged."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Nüüd peate valima, milliselt kettaosalt soovite GNU/Linuxit laadida.\n"
-"\n"
-"Valige \"Kővaketta esimene sektor (MBR)\", kui ei tea täpselt, mida\n"
-"teha."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"Esmalt otsib DrakX PCI siini SCSI liideseid. Kui neid leitakse, ja \n"
-"vastav(ad) juhtprogramm(id) on teada, siis laetakse ja installitakse \n"
-"kőik vajalik automaatselt.\n"
-"\n"
-"\n"
-"Kui Teie SCSI liides kasutab ISA siini vői kui DrakX ei tea,\n"
-"millist juhtprogrammi kasutada vői Teil ei ole üldse SCSI liidest,\n"
-"siis küsitakse Teilt selle kohta.\n"
-"Kui Teil SCSI liidest tőesti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
-"on, siis vastake \"Jah\". Seejärel lastakse Teil nimekirjast sobiv\n"
-"juhtprogramm valida.\n"
-"\n"
-"\n"
-"Kui olete juhtprogrammi välja valinud, on Teil vőimalus anda sellele\n"
-"ka parameetreid. Siiski, enamasti läheb kőik kenasti ka ilma neid\n"
-"sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
-"\n"
-"Kui automaatne parameetrite otsimine ei tööta, tutvuge palun lähemalt\n"
-"oma SCSI liidese dokumentatsiooniga vői küsige abi riistvara müüjalt.\n"
-"Vaadake ka User Guide'i (peatükk 2, lőik \"Collective informations on your\n"
-"hardware\")\n"
-"Ka samas masinas olev Windows oskab vahel SCSI kohta kasulikku \n"
-"informatsiooni anda."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"You can add additional entries for yaboot, either for other operating "
-"systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"\n"
-"For other OS's - the entry consists only of a label and the root partition.\n"
-"\n"
-"\n"
-"For Linux, there are a few possible options: \n"
-"\n"
-"\n"
-" - Label: This is simply the name will type at the yaboot prompt to select "
-"this \n"
-"boot option.\n"
-"\n"
-"\n"
-" - Image: This would be the name of the kernel to boot. Typically vmlinux "
-"or\n"
-"a variation of vmlinux with an extension.\n"
-"\n"
-"\n"
-" - Root: The root device or '/' for your Linux installation.\n"
-"\n"
-"\n"
-" \n"
-" - Append: On Apple hardware, the kernel append option is used quite often "
-"to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button "
-"emulation\n"
-"for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse. The "
-"following \n"
-"are some examples:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-" - Initrd: This option can be used either to load initial modules, before "
-"the boot \n"
-"device is available, or to load a ramdisk image for an emergency boot "
-"situation.\n"
-"\n"
-"\n"
-" - Initrd-size: The default ramdisk size is generally 4096 bytes. If you "
-"should need\n"
-"to allocate a large ramdisk, this option can be used.\n"
-"\n"
-"\n"
-" - Read-write: Normally the 'root' partition is initially brought up read-"
-"only, to allow\n"
-"a filesystem check before the system becomes 'live'. You can override this "
-"option here.\n"
-"\n"
-"\n"
-" - NoVideo: Should the Apple video hardware prove to be exceptionally "
-"problematic, you can\n"
-"select this option to boot in 'novideo' mode, with native framebuffer "
-"support.\n"
-"\n"
-"\n"
-" - Default: Selects this entry as being the default Linux selection, "
-"selectable by just\n"
-"pressing ENTER at the yaboot prompt. This entry will also be highlighted "
-"with a '*', if you\n"
-"press TAB to see the boot selections."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n"
-"to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful as to choose the correct parameters.\n"
-"\n"
-"\n"
-"Yaboot main options are:\n"
-"\n"
-"\n"
-" - Init Message: A simple text message that is displayed before the boot\n"
-"prompt.\n"
-"\n"
-"\n"
-" - Boot Device: Indicate where you want to place the information required "
-"to \n"
-"boot to GNU/Linux. Generally, you will have setup a bootstrap partition "
-"earlier \n"
-"to hold this information.\n"
-"\n"
-"\n"
-" - Open Firmware Delay: Unlike LILO, there are two delays available with \n"
-"yaboot. The first delay is measured in seconds and at this point you can \n"
-"choose between CD, OF boot, MacOS, or Linux.\n"
-"\n"
-"\n"
-" - Kernel Boot Timeout: This timeout is similar to the LILO boot delay. "
-"After \n"
-"selecting Linux, you will have this delay in 0.1 seconds before your "
-"default\n"
-"kernel description is selected.\n"
-"\n"
-"\n"
-" - Enable CD Boot?: Checking this option will allow you to choose 'C' for "
-"CD at\n"
-"the first boot prompt.\n"
-"\n"
-"\n"
-" - Enable OF Boot?: Checking this option will allow you to choose 'N' for "
-"Open\n"
-"Firmware at the first boot prompt.\n"
-"\n"
-"\n"
-" - Default OS: You can select which OS will boot by default when the Open "
-"Firmware \n"
-"Delay expires."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-#, fuzzy
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Valige kővaketas, mida soovite Mandrake Linux installimiseks puhastada\n"
-"Ettevaatust, kőik sellel leiduvad andmed hävitatakse ja ei ole enam\n"
-"taastatavad."
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Valige \"OK\" kui soovite kustutada kőik sellel kettal asuvad "
-"partitsioonid.\n"
-"Ettevaatust, peale \"OK\" klikkimist ei ole enam vőimalik sellelt kettalt\n"
-"andmeid taastada.\n"
-"\n"
-"\n"
-"Katkestamiseks valige \"Katkesta\"."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Üldlevi kasutamine on ilma NIS domeenita vőimatu"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Pane FAT formaadis flopi seadmesse %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "See flopi ei ole FAT formaadis"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Et kasutada seda paketivalikut, alustage installimist käsureaga \"linux "
-"defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Viga faili %s lugemisel"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Osa teie riistvarast nőuab tarnijapoolseid juhtprogramme.\n"
-"Informatsiooni nende kohta saate: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Teil peab olema juurpartitsioon.\n"
-"Selleks looge uus partitsioon (vői valige üks olemasolevatest).\n"
-"Siis valige tegevus \"Ühenduspunkt\" ja seadke see kui '/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Teil peab olema saaleala"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Saaleala ei ole määratud\n"
-"\n"
-"Jätkate ikkagi?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Teil peab olema saaleala"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Kasuta vaba ruumi"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei ole piisavalt ruumi uute partitsioonide jaoks"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Kasuta olemasolevat partitsiooni"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Kasutatavat partitsiooni ei leitud"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Kasuta Windowsi partitsiooni loopback-ina"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Millisele partitsioonile soovite installida Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Valige suurused"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Juurpartitsiooni suurus (MB): "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Saaleala suurus (MB): "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Kasuta vaba ruumi Windowsi partitsioonil"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Mis partitsiooni soovite muuta?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Arvutan Windowsi failisüsteemi piire"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT partitsiooni suurust ei őnnestu muuta, \n"
-"ilmnes selline viga: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Teie Windowsi partitsioon on fragmenteerunud, palun kasutada 'defrag'-i"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"HOIATUS!\n"
-"\n"
-"DrakX hakkab Teie Windowsi partitsiooni suurust muutma. Olge ettevaatlik:\n"
-"see operatsioon vőib olla ohtlik Teie failidele. Palun kasutage enne\n"
-"scandisk-i, defrag-i ja tehke tagavarakoopia.\n"
-"Kui olete oma otsuses kindel, vajutage OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kui palju ruumi jätate Windowsi jaoks?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "Partitsioon %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Suuruse muutmine ebaőnnestus: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr "Sobivat FAT partitsiooni ei leitud (ei ole piisavalt ruumi)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Tühjenda kogu ketas"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Eemalda Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teil on rohkem kui üks kővaketas, millisele neis installite Linuxi?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Kettal %s hävivad KŐIK partitsioonid ja andmed"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partitsioneerin ise"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Kasuta fdisk-i"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Nüüd saate partitsioneerida %s kővaketta\n"
-"Kui olete valmis, salvestage käsuga 'w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Teil ei ole piisavalt vaba ruumi Windowsi partitsioonil"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Installimiseks ei ole üldse ruumi"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX kettajagamise abimees leidis sellised lahendused:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ketta jagamine ebaőnnestus: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Käivitame vőrguliidesed"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Seiskame vőrguliidesed"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Tekkis mingi viga, aga seda ei suuda programm ise klaarida.\n"
-"Jätkake omal vastutusel."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Ühenduspunkt %s on määratud topelt"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Mőned tähtsad paketid ei saanud korralikult paika.\n"
-"Teie CD-lugeja vői CD on ilmselt vigane.\n"
-"Paketifaile CD-l saate kontrollida käsuga \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "See ongi %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Flopiseade ei ole kättesaadav"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Järgmine samm: '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Teie süsteemil on ressursiprobleeme ja installimine vőib ebaőnnestuda.\n"
-"Kui nii juhtub, proovige palun tekstipőhjalist paigaldust. Selleks \n"
-"vajutaga laadimisel F1 ja sisestage 'text'"
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Installi klass"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Palun valige üks järgnevatest paigaldusklassidest"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Teie poolt valitud gruppide kogusuurus on umbes %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Kui soovite installida sellest vähem, valige vastav protsent.\n"
-"\n"
-"Madalama protsendi puhul installitakse vaid kőige tähtsamad paketid;\n"
-"100%% tähendab kőige valitud pakettide installimist."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, fuzzy, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Teil on kettal ruumi vaid %d%% pakettide jaoks.\n"
-"\n"
-"Kui soovite sellest vähem, valige väiksem protsent ja installimisele\n"
-"kuuluvad vaid olulisemad paketid."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Täpsemalt saate valida järgmisel sammul"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Installitavate pakettide protsent"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Paketigruppide valik"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Valik paketthaaval"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Suurus kokku: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Vigane pakett"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versioon: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Suurus: %d kB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Tähtsus: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Seda paketti ei saa valida, kettaruumi ei ole paigalsuseks piisavalt"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Installimiseks on valitud järgmised paketid"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Eemaldamiseks on valitud järgmised paketid"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Seda paketti ei saa (mitte) valida"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "See pakett on kohustuslik"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "See pakett on juba installitud"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Selle paketi peaks uuendame\n"
-"Olete kindel, et Te ei vali seda?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Selle paketi peate valima, sest selle uuendamine on kohustuslik"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Näita automaatselt valitud pakette"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installimine"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Salvesta flopile"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eemaldamine"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Valige paketid installimiseks"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installin"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Oletan"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Aega jäänud "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Palun oodake, valmistun installimiseks"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketti"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Paketi %s installimine"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Nőus"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Keeldun"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vahetage CD!\n"
-"\n"
-"Palun sisestage CD pealdisega \"%s\" lugejasse ja vajutage <OK>.\n"
-"Kui teil säherdust ei ole, vajutage <Katkesta>"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Ikkagi edasi?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Pakettide tellimisel tekkis viga:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Pakettide installimisel tekkis viga:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Hoiatus\n"
-"\n"
-"Palun lugege hoolega alltoodud teksti. Kui Te ei ole kőigi alljärgnevate\n"
-"väidetega, on installimine järgmise CD pealt keelatud. Vajutage 'Keeldun', \n"
-"et jätkata installimist ilma selle CD-ta.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Tekkis mingi viga"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "Kas soovite vőrguühendust taaskäivitada?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lőppkasutaja litsentsileping"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Järgnev lőppkasutaja litsents on eksimuste vältimiseks originaalkeeles\n"
-"\n"
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Klaviatuur"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Vőimalike klaviatuuride täielik nimekiri"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Millist installi klassi Te soovite"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installimine/Uuendus"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "On see installimine vői taastamine?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Soovituslik"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uuendus"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Palun valige hiire tüüp"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Hiire port"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Millisesse seerialporti on Teie hiir ühendatud?"
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Nuppude teesklemine"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Teeskle 2 hiirenupp"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Teeskle 3 hiirenuppu"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kaartide seadmine..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE seadistamine"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ei leia partitsioone"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Otsin partitsioonidelt ühenduspunkte"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Valige ühenduspunktid"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
-"Proovin loetamatud kirjed puhastada kuid ANDMED NENDEL HÄVIVAD.\n"
-"Teine vőimalus on keelata DrakX-il partitsioonitabeli muutmine.\n"
-"(Viga oli selline: %s)\n"
-"Kas olete nőus partitsioonide kaotamisega?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ei saanud partitsioonitabeli lugemisega hakkama.\n"
-"Jätkate omal vastutusel!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Juurpartitsiooni ei leitud"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Juurpartitsioon"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Millisel partitsioonil hoiate juurkataloogi (/)?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Partitsioonitabeli säilitamiseks vajate alglaadimist"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Valige partitsioonid, mida soovite vormindada"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Blokkide kontroll?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Vormindan partitsioone"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Loon ja vormindan faili %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Saaleala on installimiseks liiga väike, palun lisage"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Otsin kättesaadavaid pakette"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Otsin uuendatavaid pakette"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr "Teie kővakettal ei ole piisavalt vaba ruumi (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Täielik (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimaalne (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Soovitatav (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Taasta flopilt"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Taasta flopilt"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Paketigruppide valik"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Salvesta flopile"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Valige pakett installimiseks"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Oodake"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Kui Teil on olemas kőik alltoodud CD-d, klikkige <OK>.\n"
-"Kui Teil ei ole ühtki neist, klikkige <Katkesta>.\n"
-"Kui puuduvad mőned CD-d, märkige vaid olemasolevad ja siis <OK>."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD pealdisega \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Valmistun installimiseks"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Paketi %s installimine\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Paigaldusjärgsed sätted"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Pange palun tühi flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Nüüd on Teil vőimalik oma süsteemi laadida krüptotarkvara.\n"
-"\n"
-"HOIATUS:\n"
-"\n"
-"Lähtuvalt erinevatest sellisele tarkvarale kohaldavatest nőuetest ja \n"
-"mőjutatuna eri jurisdiktsioonide normidest peavad kliendid ja/vői \n"
-"lőppkasutajad olema kindlad, et nende asukohamaa jurisdiktsiooni "
-"őiguslikud \n"
-"aktid lubavad neil alla laadida, säilitada ja/vői kasutada \n"
-"krüptograafiliste algoritmide realisatsioone sisaldavat tarkvara.\n"
-"\n"
-"Lisaks sellele peavad kliendid ja/vői lőppkasutajad jälgima asukohamaa \n"
-"juriidiliste normide täitmist. Kui klient ja/vői lőppkasutaja rikub "
-"kehtivaid \n"
-"őigusnorme, kohaldatakse karistus vastavalt asukohamaa seadustele.\n"
-"\n"
-"Mitte mingil juhul ei kanna Mandrakesoft S.A. ega tarkvara tarnija \n"
-"vastutust ei otseselt ega kaudselt tekkinud kahjude eest (kaasa arvatud, \n"
-"kuid mitte ainult, saamatajäänud tulu, äritegevuse katkestamine, äriinfo \n"
-"kaotsimine ja muud rahalised kaotused ning vőimalikud kohtu poolt välja \n"
-"mőistetud hüvitused), mis tulenevad tarkvara, mis on kasutatav pärast \n"
-"käesoleva lepingu tingimustega nőustumist, alla laadimisest, hoidmisest \n"
-"vői kasutamisest.\n"
-"\n"
-"Kőigi lepinguga seotud küsimuste asjus pöörduge palun aadressil: \n"
-"Mandrakesoft, Inc. \n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Proovin lugeda peeglilt pakettide nimekirja"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valige peegel, millelt lugeda pakettide nimekiri"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Proovin lugeda peeglilt pakettide nimekirja"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Millises ajavöötmes asute?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "Kas Teie arvuti sisekell on seatud GMT ajale?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Printerit ei ole"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "On Teil veel kaarte?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Kokkuvőte"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Hiir"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Ajavööde"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printer"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kaart"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Helikaart"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kaart"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Kasuta NIS-i"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Kohalik printer"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Juurkasutaja salasőna"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Salasőna puudub"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Salasőna on liiga lihtne (peaks olema vähemalt %d tähemärki)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentimisviis"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autentimisviis"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "NIS autentimine"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domeen"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS server:"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Isetehtud alglaadimisketas annab Teile vőimaluse laadida Linux flopilt\n"
-"sőltumata tavaliselt alglaadijast. See vőib abiks olla, kui Te ei soovi\n"
-"SILO-t kővakettale kirjutada vői mőni muu operatsioonisüsteem SILO\n"
-"ära kustutab vői ei őnnestu SILO-t Teie riistvara peal kasutada.\n"
-"Alglaadmisflopi on kasutatav ka hädaabikettana, kui kővakettal oleva\n"
-"failisüsteemiga peaks mingi őnnetus juhtuma. Hoidke end ja Teid hoiab\n"
-"ka Jumal!\n"
-"\n"
-"Alglaadimisketta loomiseks asetage flopi esimesse seadmesse ning vajutage\n"
-"\"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Esimene flopiseade"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Teine flopiseade"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Jäta vahele"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Isetehtud alglaadimisketas annab Teile vőimaluse laadida Linux flopilt\n"
-"sőltumata tavaliselt alglaadijast. See vőib abiks olla, kui Te ei soovi\n"
-"LILO-t (grubi) kővakettale kirjutada vői mőni muu operatsioonisüsteem LILO\n"
-"ära kustutab vői ei őnnestu LILO-t Teie riistvara peal kasutada.\n"
-"Alglaadmisflopi on kasutatav ka hädaabikettana, kui kővakettal oleva\n"
-"failisüsteemiga peaks mingi őnnetus juhtuma. Hoidke end ja Teid hoiab\n"
-"ka Jumal!\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Flopiseade ei ole kättesaadav"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Vali flopiseade, mida kasutad alglaadimisketta tegemiseks"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Pane flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Loome alglaadimisketta"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Alglaaduri sätted"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Soovite aboot-i kasutada?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Viga aboot-i installimisel, \n"
-"kas forseerida, riskides esimese partitsiooni hävinguga?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Alglaaduri sätted"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Alglaaduri installimine ebaőnnestus. Tekkis järgnev viga:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, fuzzy, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You will need to change your Open Firmware boot-device to\n"
-" enable the bootloader. Hold down Command-Option-O-F\n"
-" at reboot and enter:\n"
-" setenv boot-device $of_boot,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Pange palun tühi flopi seadmesse %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Loon kiirpaigaldusflopi"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Mőned sammud ei ole lőpule viidud\n"
-"\n"
-"Olete kindel, et väljute programmist?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Őnnitlen, installimine on edukalt lőpetatud.\n"
-"Vőtke palun välja flopi ja/vői CD ja vajutage Enter alglaadimiseks.\n"
-"\n"
-"\n"
-"Informatsiooni selle distributsiooni paranduste kohta (Errata) saab\n"
-"Mandrake Linux koduleheküljelt \n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Abi süsteemi edasiseks konfigureerimiseks saab eelkőige dokumendist\n"
-"\"Official Mandrake Linux User's Guide\""
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Loo kiirpaigaldusflopi"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automaatne install vőib olla ka sedavőrd tegija,\n"
-"et kasutab ära kogu kővaketta !!\n"
-"\n"
-"Vőite valida ka lihtsalt installi kordamise.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automaatne"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Korda"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Salvest paketivalik"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux installimine %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr " <Tab>/<Alt-Tab> väljade vahel | <Space> valib | <F12> järgmine samm "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu puudub"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Valige tegevus"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Edasijőudnud"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Palun oodake"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Ava puu"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sule puu"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Sorteeritud vői sorteerimata"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Halb valik, proovige palun uuesti\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Eelistused: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Soovite aboot-i kasutada?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Teie valik? (vaikimisi %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "T¨ehhi (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Saksa"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "DVORAK"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Hispaania"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Soome"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Prantsuse"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norra"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poola"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Vene"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Rootsi"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Briti"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraani"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeenia (vanem)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (trükimasin)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneetiline)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Aserbaidţaani (ladina)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armeenia (foneetiline)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaaria"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiilia (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Valgevene"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Đveitsi (Saksa asetus)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Đveitsi (Prantsuse asetus)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tđehhi (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Saksa (ilma sammuta)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Taani"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "DVORAK (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "DVORAK (Norra)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "DVORAK (US)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eesti"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruusia (vene)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruusia (ladina)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Kreeka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungari"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroaadi"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Iisraeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Iisraeli foneetiline"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraani"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandi"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Itaalia"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Jaapani 106 klahviga"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korea"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Ladina-Ameerika"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Leedu AZERTY (vanem)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Leedu AZERTY (uuem)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Leedu numbrireaga QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Leedu foneetiline QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Asukoht"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedoonia"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollandi"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poola (QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poola (QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugali"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Vene (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Sloveenia"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaki (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Aserbaidţaani (kirillitsa)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tabel"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Tai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Türgi (\"F\" mudel)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Türgi (\"Q\" mudel)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US (rahvusvaheline)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnami numbrireaga QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavia (koos kirillitsaga)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Ringühendus %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Eemalda enne kettarühmad (logical volumes)\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Suni hiir"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Lihtsalt PS2 rattaga hiir"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 nupp"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Lihtsalt 2-nupuline hiir"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Tavaline"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Ratas"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seerial"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Lihtsalt 3-nupuline hiir"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC seeria (seerial)"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech (seerial, vana C7 tüüpi)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "siinihiir"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 nuppu"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 nuppu"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ei soovi"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Hiirt ei ole"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Palun testige hiirt"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Hiire aktiveerimiseks"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "KEERUTAGE RATTAKEST!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Lőpeta"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Järgmine ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Eelmine"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Kas see on sobiv?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Loo internetiühendus"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Kőige tavalisem ühendusviis ADSL jaoks on pppoe.\n"
-"Mőnel juhul aga kasutatakse pptp-d, harva dhcp-d.\n"
-"Kui Te ei tea, kasutage pppoe-d"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Mis DHCP klienti soovite kasutada?\n"
-"Vaikimisi on dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ühtki vőrgukaarti ei őnnestunud tuvastada\n"
-"Seega ei saa ka sellist ühendust seadistada."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Valige vőrguliides"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Palun valige, millist vőrguliidest soovite internetiühenduse jaoks kasutada"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "vőrgukaarti ei leitud"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Vőrguseadistused"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Palun sisestage oma masina nimi.\n"
-"Seda nőuavad ka mőned DHCP serverid.\n"
-"Masina nimi peab olema esitatud täiskujul,\n"
-"nagu ``minumasin.minufirma.ee''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Masinanimi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Vőrgu sätete abimees"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Väline ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Sisemine ISDN kaart"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Millist ISDN ühendust kasutate?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Leitud tulemüüri sätted!"
-
-#
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Leitud tulemüüri sätted!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN sätted"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Vali oma teenusepakkuja.\n"
-" Kui see ei ole nimekirjas, vali Tundmatu"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Laadimisprotokoll"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Euroopa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Ülejäänud maailm"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Ülejäänud maailm \n"
-" ilma D-kanalita"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Mis protokolli soovite kasutada?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Mis tüüpi kaart Teil on?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ei tea"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Kui Teil on ISA kaart, siis peaks järgmised väärtused olema őiged.\n"
-"\n"
-"Kui Teil on PCMCIA kaart, peaksite Te ise teadma selle IRQ ning IO "
-"väärtusi.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Katkesta"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Jätka"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Milline on Teie ISDN kaart?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Leidsin küll PCI ISDN kaardi, kui selle tüüp on tundmatu. Palun valige üks "
-"PCI kaart järgmisel sammul."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "PCI ISDN kaarti ei leitud. Palun valige üks järgmisel sammul."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Millisesse seerialporti on Teie modem ühendatud?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "DialUp parameetrid"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ühenduse nimi"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Sissehelistamiskeskuse number"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Kasutajakonto"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Skriptipőhine"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminalipőhine"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeeninimi"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Esimene nimeserver (soovituslik)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Teine nimeserver (soovituslik)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Saate ühenduse katkestada vői uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Saate seadistada ühenduse uuesti."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Hetkel olete Internetiga ühendatud."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Saate ühenduda Internetti vői seadistada ühendus uuesti."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Hetkel ei ole Te Internetti ühendatud."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Ühendatud"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Lahuta..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Seadista TV-kaabli ühendus"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetiühenduse seadistamine"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Saate ühenduse katkestada vői uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Saate ühenduse katkestada vői uuesti seadistada."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Vőrgu sätted"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Vőrguühendus on juba seadistatud, sest installitakse ju vőrgust.\n"
-"Kui soovite neid seadistusi säilitada, valige OK, muidu katkestage ja saate "
-"seadistada uuesti.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Internetiühenduse Abimees\n"
-"\n"
-"Nüüd hakkame internetiühendust seadistama.\n"
-"Kui Te ei soovi automaatset tuvastamist siis jätke see märkimata.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Valige profiil, mida seadistada"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Kasuta automaattuvastust"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Otsin printerit..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Tavaline modemiühendus"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "leiti port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN ühendus"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "tuvastati %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "LAN ühendus"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "leiti liidesel %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kaabliühendus"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Kaabliühendus"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN ühendus"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "vőrgukaart(i) leiti üles"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Valige kasutatav vahend"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Internetiühenduse jagamine"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Kas soovite luua ühenduse juba alglaadimisel?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Vőrgusätted"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Kas soovite vőrguühendust taaskäivitada?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Őnnitleme, vőrgundus ja internetiühendus on seadistatud.\n"
-"\n"
-"Sätted salvestatakse nüüd.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Soovitame taaskäivitada ka X keskkonna, et vältida vőimalikke\n"
-"masinanime muutmisest tingitud probleeme."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"HOIATUS: See seade on juba seadistatud Interneti jaoks.\n"
-"Valige lihtsalt OK, et sätteid mitte muuta."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Palun andke IP parameetrid selle masina jaoks.\n"
-"Kőik read tuleb sisestada IP-aadressi kujul\n"
-"(Näiteks 12.34.56.78)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Seadistame vőrgukaardi %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (juhtprogramm %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-aadress"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Vőrgu mask"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automaatne IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-aadress peab olema formaadis 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Palun sisestage oma masina nimi.\n"
-"Masina nimi peab olema esitatud täiskujul,\n"
-"nagu ``minumasin.minufirma.ee''.\n"
-"Kui Teil on vaikimisi lüüs, siis sisestage ka selle IP-aadress"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Nimeserver"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Lüüsipoolne seade"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Vahendajate sätted"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP vahendaja"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP vahendaja"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Vahendaja peab olema kujul http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Vahendaja peab olema kujul ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneti sätted"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Kas soovite oma internetiühendust proovida?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testime Teie ühendust..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Süsteem on nüüd Internetti ühendatud"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Turvakaalutlusel katkestan nüüd ühenduse."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Paistab, et süsteem ei ole Internetti ühendatud.\n"
-"Palun seadistage ühendus uuesti."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Internetiühenduse sätted"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Palun täida allpool olev väli"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kaardi IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kaardi mälu (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kaardi IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kaardi IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kaardi IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Teie telefoninumber"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Teenusepakkuja tunnus (näiteks minuisp.ee)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Sissehelistamiskeskuse number"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 (vőib jätta tühjaks)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 (vőib jätta tühjaks)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Klaviatuuri valik"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Valimisviis"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Ühenduse tüüp: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Ühenduse tüüp: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kasutajatunnus"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Salasőna"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "ühendamine ebaőnnestus: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Sellel platformil ei saa laiendatud partitsiooni luua"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Partitsioonitabelis on miskipärast tühi koht, aga see ei ole kasutatav.\n"
-"Ainuke lahendus on nihutada primaarset partitsiooni, et auk satuks "
-"laiendatud partitsioonide kőrvale"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Taastamine failist %s ebaőnnestus: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Viga faili %s kirjutamisel"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Teie kővakettal juhtub imelikke asju. \n"
-"Andmete pidevuse kontroll ebaőnnestus. \n"
-"See tähendab, et kettale kirjutamisel tekivad jamad"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "vajalik"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "tähtis"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "väga kena"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "kena"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "vőib olla"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Kohalik printer"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Vőrguprinter"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "lpd printserver"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Vőrguprinter (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Printserver:"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Printeri seadme URI"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Kohalik printer"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Vőrguprinter"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Viga faili %s kirjutamisel"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(moodul %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS serveri IP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Vaikimisi)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Vali printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kuidas on see printer ühendatud?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Kui vőrgus on CUPS server, siis ei ole Teil vaja siin\n"
-"printereid seadistada, need leitakse automaatselt.\n"
-"Kui kahtlete, valige \"CUPS printserver\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN sätted"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "CUPS printserver"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-aadress peab olema formaadis 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "Pordi number peab olema ikkagi number"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS serveri IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Otsin printerit..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Proovin porte"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Vőrguprinter"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Kasuta automaattuvastust"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Vőrguprinter"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "tuvastati %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Millisesse seerialporti on Teie modem ühendatud?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Seadistused"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Paketi %s installimine"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Paketi %s installimine"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Vőrguprinteri sätted"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Et kasutada teise masina lpd printerit, peate sisestama\n"
-"printserveri nime ja prindijärjekorra nime, mida soovite\n"
-"serveril kasutada."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Vőrguprinter"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Printserveri nimi:"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) printeri sätted"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Et printida SMB printerile, peate andma vastava server SMB nimi\n"
-"(NB! See ei pruugi kokku langeda TCP/IP nimega!) ja vőibolla ka\n"
-"printserveri IP-aadressi, samuti ka serveri poolt jagatava printeri\n"
-"nime ning serveri poolt aktsepteeritud kasutajatunnuse, salasőna ja töögrupi"
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB serveri nimi"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB serveri IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Jagatav printer"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Töögrupp"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare printeri sätted"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Et kasutada NetWare printerit, peate sisestama NetWare printserveri\n"
-"nime (NB! See vőib olla erinev tema TCP/IP nimest!) samuti nagu ka\n"
-"prindijärjekorra nime serveril ning kasutajatunnuse ja salasőna"
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Printserver:"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Prindijärjekorra nimi:"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Pistikprinteri sätted"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Sisestage palun printeri masinanimi ja vőimaluse\n"
-"korral pordi number"
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Printeri seadme URI"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Printeri nimi"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Kirjeldus"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Asukoht"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Vőrguprinter"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Kas see on sobiv?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Vőrguprinter"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Mis tüüpi printer see on?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Proovin porte"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Jah, trüki mőlemad testleheküljed"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printer"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Standardtööriistad"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testlehekülg on saadetus trükideemonile.\n"
-"Nüüd vőib minna natuke aega.\n"
-"Staatus:\n"
-"%s\n"
-"\n"
-"Kas tulemust on juba näha?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testlehekülg on saadetud trükideemonile.\n"
-"Nüüd vőib minna natuke aega.\n"
-"Staatus:\n"
-"%s\n"
-"\n"
-"Kas tulemust on juba näha?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Hiir"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Seiskame vőrguliidesed"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Seiskame vőrguliidesed"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Otse ühendatud printeri sätted"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Printeri nimi tohib sisaldada vaid tähti, numbreid ja alakriipsu"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Printerit ei ole"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Sea printer"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Testime Teie ühendust..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Vőrgusätted"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Vőrguseadistused"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Millist printimissüsteemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Kőrge"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoiline"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Millist printimissüsteemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Vali printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Millist printimissüsteemi soovite kasutada?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Printeri sätted"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Paketi %s installimine"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Otse ühendatud printeri sätted"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Printeri sätted"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Kas soovite printerit seadistada?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Kirjeldatud on järgnevad prindijärjekorrad.\n"
-"Te vőite neid lisada ning olemasolevaid muuta."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Kirjeldatud on järgnevad prindijärjekorrad.\n"
-"Te vőite neid lisada ning olemasolevaid muuta."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Vőrgusätted"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Tavakasutus"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Interneti sätted"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Internetiühenduse jagamine"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Printeri ühendusviis"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Trükitakse testlehekülg(i)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Kas soovite seadistusi proovida?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Vőrguprinter"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Kohalik printer"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Kas soovite vőrguühendust taaskäivitada?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Loetakse CUPS juhtprogramme"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Vahendajate sätted"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Port"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "Vahendaja peab olema kujul http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "Pordi number peab olema ikkagi number"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "Vahendaja peab olema kujul ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Vaikimisi sisenemine"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Salasőna"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Salasőna puudub"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Salasőnad ei klapi"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Juba vormindatud RAID-ile (md%d) ei saa partitsiooni lisada"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ei saa kirjutada faili %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid ebaőnnestus"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid ebaőnnestus (puudub 'raidtools'?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei ole piisavalt partitsiooni RAID-%d jaoks\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Anacron käivitab programme perioodiliselt analoogiliselt cron-ile.\n"
-"Kasutage seda juhul kui Teie arvuti ei tööta 24h."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd on kasutusel pőhiliselt sülearvutites, akude täituvuse jälgimiseks.\n"
-"Samuti suudab see aku tühjenemisel süsteemi viisakalt maha vőtta."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Laseb käivitada ühekordseid käske etteantud ajal vői ootab süsteemi\n"
-"koormuse laskumist käsu käivitamiseks piisavale tasemele."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron on UNIXi süsteemide standardvahend kasutaja programmide perioodiliseks\n"
-"käivitamiseks. Vixie cron sisaldab lisaks veel turvalisust ja kasutus-\n"
-"mugavust tőstvaid omadusi. Soovitav süsteemile mis töötab 24h"
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM annab vőimaluse kasutada hiirt ka tekstikonsoolil. Lisaks tavalisele\n"
-"lőikamisele/kleepimisele saab kasutada ka menüüsüsteeme."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache on maailma juhtiv veebiserveri programm. Tőenäoliselt\n"
-"ka vőimsaim."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneti \"superserver\", nimega inetd laseb käivitada mitmeid vőrgu-\n"
-"teenustel, nagu telnet, ftp, rsh, rlogin jne."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"See programm laeb süsteemi käivitumisel klaviatuuripaigutuse vastavalt\n"
-"failis /etc/sysconfig/keyboard kirjeldatule."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr "lpd on trükideemon, ilma selleta ei ole vőimalik printida."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) on kasutusel nimeserverites, mis teenindavad DNS\n"
-"hierarhiat, tőlkimaks nimesid IP-aadressideks"
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Ühendab ja lahutab kőiki vőrgufailisüsteeme (nii NFS, SMB\n"
-"kui ka NCP)"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr "Aktiveerib süsteemi laadimisel Teile vajalikud vőrguliidesed."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm täidab\n"
-"NFS serveri funktsioone, ja konfigureeritakse failis /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS on UNIXi keskkonna standardne failijaotusprotokoll. See programm täidab\n"
-"NFS failide lukustamise funktsioone. Vajalik serveerimisel."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA tugi on tavaliselt vajalik sülearvutitele vőrgu- ja modemiliideste\n"
-"lisamiseks."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper haldab RPC ühendusi, mida kasutavad NFS ja NIS. Neil \n"
-"serveritel on see hädavajalik."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix on meili transpordiagent, see tähendab programm, mis\n"
-"toimetab meili ühest masinast teise."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Salvestab ja taastab juhuarvude genereerimiseks vajaliku süsteemse\n"
-"entroopiasalve."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed on RIP deemon, mis vahetab selle protokolli alusel marsruutimis-\n"
-"infot. Kui Teil on RIP kasutusel, on vajalik ka routed."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokoll laseb üle vőrgu saada informatsiooni süsteemi\n"
-"töö kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokoll laseb üle vőrgu saada informatsiooni süsteemi\n"
-"kasutajate kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokoll laseb üle vőrgu saada informatsiooni süsteemi\n"
-"kasutajate kohta. Ettevaatust!"
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Käivita X-Windows alglaadimisel"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr "syslog-i kaudu toimub süsteemis toimiva logimine. Vajalik!"
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Stardib X fondiserveri, selleta X ei käivitu."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Valige, millised teenused tuleks alglaadimisel käivitada"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printer"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Töömood"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Vőrguprinteri sätted"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Server, Andmebaasid"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "seade"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "käimas"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "peatatud"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Teenused ja deemonid"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Selle teenuse kohta ei oska\n"
-"lisainformatsiooni anda."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Alglaadimisel"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Olek:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Ülejäänud maailm"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internetiühendus"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimeedia - Graafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Arendus"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Juhtimiskeskus"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Vőrguliides"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB serveri nimi"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Mängud"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "ekspert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "kohustuslik"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Paketi %s installimine"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Partitsioonitabel on loetamatu, liiga rikutud DrakX-i jaoks :(\n"
-"Proovin loetamatud kirjed puhastada"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Viga"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Paigaldusjärgsed sätted"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Alglaaduri stiil"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Őnnitleme!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Installimine"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Tavakasutaja"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Vormindan loopback faili %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Paketigruppide valik"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Eemalda prindijärjekord"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Eemalda Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Kasutajatunnus"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Palun testige hiirt"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Palun proovige veel"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Palun proovige veel"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Salasőna puudub"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN ühendus"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Vali printeri ühendusviis"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Palun valige partitsioon"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Palun testige hiirt"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Vőrgu mask:"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Kasutajatunnus"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Kas optimiseerime kővaketast?"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Kas optimiseerime kővaketast?"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Oodake"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Ratas"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Ratas"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Mooduli parameetrid:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Vőrgu sätted"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-#, fuzzy
-msgid "across Network"
-msgstr "Vőrgu mask:"
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Failisüsteemid"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Eelistused"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Millisesse seerialporti on Teie modem ühendatud?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Vőrgu sätted"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Palun valige hiire tüüp"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Taasta flopilt"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Palun valige hiire tüüp"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Muu"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Süsteemi installimine"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Taasta failist"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Taasta failist"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Isetehtud"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/_Abi"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Eelmine"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Olek:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Taasta failist"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Tekst"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Pakettide valik"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Palun valige kasutatav keel"
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Kőlbmatu tagavarakoopia"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Salvesta faili"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Palun testige hiirt"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Palun valige paketid installimiseks"
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Vőrgu sätted"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Vőrgu sätted"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "ISDN sätted"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Failisüsteemid"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s installimine ebaőnnestus. Tekkis järgnev viga:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s ei leitud"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Tehtud"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Vorminda flopi"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Valmistun installimiseks"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "piiratud"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "piiratud"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Vormindamine"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "RPM-ide eemaldamine"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "ISDN sätted"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Ühenduspunkt"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Valige partitsioonid, mida soovite vormindada"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Kontor"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Katkesta"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printer"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Süsteemi installimine"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Valige fail"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Vőrguprinter"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Initsialiseerimisteade"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Teie süsteemis ei ole vőrgukaarti!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Installimine"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Teie süsteemis ei ole vőrgukaarti!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Välju programmist"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetiühenduse jagamine"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetiühenduse jagamine töötab"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetiühenduse jagamine on juba seadistatud ja see on\n"
-"ka praegu aktiivne.\n"
-"\n"
-"Mida Te soovite teha?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "keela"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "tühista"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "seadista uuesti"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Peaten serverid..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetiühendust nüüd enam ei jagata"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetiühendust hetkel ei jagata"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetiühenduse jagamine on juba seadistatud aga hetkel\n"
-"on see keelatud.\n"
-"\n"
-"Mida Te soovite teha?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "luba"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Käivitan serverid..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetiühenduse jagamine nüüd töötab"
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nüüd on Teil vőimalik seadistada oma arvutit internetiühendust jagama.\n"
-"\n"
-"Märkus: kohtvőrgu (LAN) jaoks on vajalik eraldi vőrgukaardi olemasolu."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liides %s (kasutab moodulit %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Liides %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Teie süsteemis ei ole vőrgukaarti!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ühtki vőrgukaarti ei ole hetkel seadistatud. Palun kasutage selleks "
-"riistvara sätteseadjat."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Vőrguliides"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Teil on vaid üks seadistatud vőrguliides:\n"
-"\n"
-"%s\n"
-"\n"
-"Kohtvőrgu sätted seotakse selle liidesga."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Palun valige millist vőrguliidest soovite kasutada kohtvőrgu\n"
-"jaoks."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Monitor ei ole seadistatud"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Alglaaduri stiil"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Interneti sätted"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "CUPS serveri IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Vőimalik kohtvőrgu aadressi konflikt %s konfiguratsioonis!\n"
-
-#
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Leitud tulemüüri sätted!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Hoiatus! Leiti olemasolevad tulemüüri sätted. Tőenäoliselt peaksite need "
-"hiljem üle vaatame."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Seadistan..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Häälestan skriptid, installin tarkvara, käivitan serverid..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleemid paketi %s installimisel"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kőik on seadistatud.\n"
-"Nüüd saate internetiühendust jagada teistele kohtvőrgu arvutitele, kasutades "
-"neil automaatset konfigureerimist (DHCP)"
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Internetiühenduse jagamine on juba seadistatud aga hetkel keelatud."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"Internetiühenduse jagamine on juba seadistatud ja see on praegu aktiivne."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetiühenduse jagamist ei ole kunagi seadistatud"
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Interneti jagamise seadistamine"
-
-#: ../../standalone/drakgw_.c:703
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Internetiühenduse jagamise Abimees!\n"
-"\n"
-"%s\n"
-"\n"
-"Valige Abimehe käivitamiseks ``OK''"
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Vőrgusätted (%d liidest)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Kustuta profiil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profiil kustutamiseks:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Uus profiil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Masinanimi: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetiühendus"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tüüp: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Vaikelüüs:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Liides:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Olek:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Seadiste internetiühendus..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Juhtprogramm"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Liides"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Olek:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Seadista kohtvőrk (LAN) ..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Abimees..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Rakenda"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Palun oodake... Rakendan seadistusi"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Ühendatud"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ei ole ühendatud"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Ühenda..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Lahuta..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Vőrgukaart %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Laadimisprotokoll"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Käivitub laadimisel"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktiivne"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktiivne"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetiühenduse seadistamine"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetiühenduse seadistamine"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Ühenduse tüüp: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parameetrid"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Vaikelüüs"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Vőrgukaart"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klient"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Turvataseme seadmine"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Juhtimiskeskus"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Valige kasutatav vahend"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanada (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Euroopa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandi"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Euroopa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "seerial"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "kasutamiseks: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Palun valige klaviatuuriasetus"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Kas soovite konsoolil kasutada BackSpace-i kui Delete?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vaheta CD plaat"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Palun sisestage installeerimise CD pealdisega lugejasse ja vajutage <OK>.\n"
-"Kui teil säherdust ei ole, vajutage <Katkesta>, et kiiruendust vältida."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ei saa kiiruuendust alustada !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "DrakNet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fail/_Uus"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fail/_Ava"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fail/_Salvesta"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fail/Salvesta _Kui"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fail/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Eelistused"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Eelistused/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Abi"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Abi/_Misvärk"
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Kasutajatunnus"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Initsialiseerimisteade"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Masin:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Masin:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "LAN sätted"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache ja Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "varjutatud"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "huvitav"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "vormindatakse"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Seadistused"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Salvesta kui..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Palun valige hiire tüüp"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ei leitud: serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Teeskleme keskmist hiirenuppu?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Valige graafikakaart"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Alglaadimisseade"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Tulemüüri sätted"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Tulemüüri sätted"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Tulemüür\n"
-"\n"
-"Tulemüüri olete juba seadistanud.\n"
-"Valige 'Seadista', et midagi muuta"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Tulemüür\n"
-"\n"
-"Valige 'Seadista', selle seadistamiseks nüüd"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Valige sobiv keel"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Valige paigaldusmeetod"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kővaketta leidmine"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Hiire seadmine"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Klaviatuuri valik"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Turvalisus"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Failisüsteemid"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Vormindamine"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Pakettide valik"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Süsteemi installimine"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Tavakasutaja"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Vőrgusätted"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Teenuste sätted"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Alglaaduri sätted"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Loo alglaadimisflopi"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Seadista X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Süsteemi installimine"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Välju programmist"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall seadistamine\n"
-"\n"
-"Selle vahendiga saate luua lihtsa kaitse Interneti ohtude vastu.\n"
-"Kui vajate vőimsat tulemüüri, vaadake palun\n"
-"spetsiaalset MandrakeSecurity Firewall distributsiooni."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nüüd küsitakse Teilt millistele teenustele soovite lubada ligipääsu\n"
-"Internetist. Palun mőelge hoolega, nende vastuste üle, sest tegu on\n"
-"ju Teie arvuti turvalisusega.\n"
-"\n"
-"Palun, kui te ei soovi hetkel mőnd neist kasutada, pange see igaks\n"
-"juhuks tulemüüri taha. Hiljem on Teil soovi korral vaba voli kőike\n"
-"uuesti lubada."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Kas sellel arvutil hakkab tööle veebiserver, mida külastatakse kogu\n"
-"Internetist? Kui vajate ligipääsu vaid samast arvutist, vastake\n"
-"siin EI.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Kas sellel arvutil hakkab tööle nimeserver? Kui Te seda ei soovi\n"
-"siis vastake palun ei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Kas soovite sisenevaid SSH ühendusi? SSH on turvaline asendus telnetile.\n"
-"Telneti kaudu üle vőrgu masinasse sisenemine on äärmisel ebaturvaline\n"
-"kuna sel teel on lihtsate vahenditega vőimalik vőrgus paroole varastada.\n"
-"SSH korral on ühendus krüptitud ja pealtkuulamine praktiliselt välistatud."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Kas soovite lubada sisenevaid telneti ühendusi?\n"
-"See on tőeliselt ebaturvaline, vastake siin palun Ei ja kasutage\n"
-"telneti asemel SSH-d.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Kas soovite sellel arvuti käivitada avaliku FTP serveri? Kui see on\n"
-"tőesti Teie soov, siis lubage palun ainult anonüümne ligipääs, sest\n"
-"muul juhul tekib jälle paroolide varastamise oht, sest FTP ei tunne\n"
-"krüptimist.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Kas Teil on jooksmas avalik meiliserver? Vastasel juhul on\n"
-"palju turvalisem siia tulemü ette panna.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Kas vajate sellel masinal POP vői IMAP serverit?\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Teil on kasutusel 2.2 kernel. Kui IP aadress antakse Teie arvutile\n"
-"dünaamiliselt, siis peaks seda siinkohal lubama.\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Kas see arvuti kuulub vőrku, millest masinad sünkroniseerivad\n"
-"omavahel kellaaega? Tőenäoliselt vőite selle rahulikult keelata."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Seadistused tehtud. Kas salvestada sätted kettale?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Vőrgukaart %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Seadme %s avamine kirjutamiseks ebaőnnestus: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Vőrgu sätete abimees"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Palun oodake, valmistun installimiseks"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Server, Veeb/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Vőrguarvuti (klient)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS, SMB, SSH server, vahendaja (proxy)"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Kontor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Suhtlus Palmi vői Visoriga"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Tulemüür/marsruuter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontoriprogrammid: tekstitöötlus (kword, abiword), tabelarvutus (kspread, "
-"gnumeric), PDF eelvaade jne"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-värgid: mp3 ja midi, mikserid jms"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Raamatud ja Howto-d Linux ja vabavara kohta"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm jt"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimeedia - Video"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Meili, uudiste, veebi, jututamise ja failiülekande programmid"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Server, Andmebaasid"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Vahendid lihtsamaks süsteemi administreerimiseks"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimeedia - Heli"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utiliidid"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentatsioon"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konsooliprogrammid"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneti tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimeedia tööjaam"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN sätted"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Veel graafilisi töölaudu (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, graafiline töökeskkond ja rida seonduvaid rakendusi"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafiline keskkond"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache ja Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Vahendid CD-de kirjutamiseks"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Kontori tööjaam"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Server"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm jne"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Graafikaprogrammid nagu Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ja C++ arendusteegid, programmid ja päisefailid"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Failiserver"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Server, Meil/grupitöö/uudised"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Mänguvahend"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video esitamine ja redigeerimine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimeedia - Graafika"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Meelelahutus: arcade, boards, strategy jne"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr "Komplekt programme meili ja uudiste lugemiseks ning veebi brausimiseks"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiveerimine, emuleerimine, monitoorimine"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Isiklikud finantsid"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Graafiline töökeskkond koos kasutajasőbralike rakendustega"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Mitmete protokollide, sealhulgas ssh kliendid"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Internetiühendus"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Heli ja video esitamine ja redigeerimine"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Muud graafilised töölauad"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorid, shellid, terminalid, failihaldus"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Isiklike finantside haldusvahendid"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Isikliku info haldamine"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimeedia - CD kirjutamine"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Teadustööjaam"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Katkesta"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ei soovi"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Valige uus vaikimisi kasutaja :"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Vőrguprinter"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Nüüd vőite moodulile %s parameetreid määrata"
-
-#~ msgid "mount failed"
-#~ msgstr "ühendamine ebaőnnestus"
-
-#~ msgid "Low"
-#~ msgstr "Madal"
-
-#~ msgid "Medium"
-#~ msgstr "Keskmine"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr "Turvataset on parandatud, lisatud on hoiatusi ja piiranguid."
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Multimeedia"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Ekspert"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linuxil on kombeks hoida sisemist kella Greenwichi (GMT) ajas ja muuta\n"
-#~ "vajadusel süsteemi kella vastavalt Teie valitud ajavööndile."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Loo internetiühendus"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Katkesta internetiühendus"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Seadista vőrguühendus (kohtvőrk vői Internet)"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Millisele kettale soovite seda ümber paigutada?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Palun valige paketid installimiseks"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Info"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Gnome tööjaam"
-
-#, fuzzy
-#~ msgid "user"
-#~ msgstr "Kasutaja:"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Palun valige hiire tüüp"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Välju"
-
-#, fuzzy
-#~ msgid "Removable media"
-#~ msgstr "CD/flopi/.. autoühendamine"
-
-#~ msgid "Active"
-#~ msgstr "Aktiivne"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Ei"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Leiti printer, nimega \"%s\" "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Otse ühendatud printer"
-
-#~ msgid "Printer Device"
-#~ msgstr "Printeri seade"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "CUPS printserver"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote server(s)"
-#~ msgstr "CUPS printserver"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Töömood"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Muu"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Palun valige klaviatuuriasetus"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Palun valige partitsioon"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Tüüp: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Kőlbmatu tagavarakoopia"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Seadista X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Printeri seade"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Katkesta"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "OK"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Hiir"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "tuut"
-
-#, fuzzy
-#~ msgid "Starting your connection..."
-#~ msgstr "Testime Teie ühendust..."
-
-#~ msgid "Closing your connection..."
-#~ msgstr "Sulgeme nüüd ühenduse..."
-
-#~ msgid ""
-#~ "The connection is not closed.\n"
-#~ "Try to do it manually by running\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "in root."
-#~ msgstr ""
-#~ "Vőrguühendus ei ole suletud.\n"
-#~ "Proovige seda teha käsitsi, käivitades\n"
-#~ "/etc/sysconfig/network-scripts/net_cnx_down\n"
-#~ "juurkasutajana."
-
-#~ msgid "The system is now disconnected."
-#~ msgstr "Süsteem on nüüd Internetist lahutatud."
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Valige paigalduse maht"
-
-#~ msgid "Total size: "
-#~ msgstr "Suurus kokku: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Palun oodake, "
-
-#~ msgid "Total time "
-#~ msgstr "Aega kokku "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Kasutada olemasolevat X-i seadistust?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "Mis porti on Teie printer ühendatud? \n"
-#~ "(paneme tähele, et /dev/lp0 on sama mis LPT1:)?\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Hoiatan, vőrguliides on juba seadistatud. Järgnevalt seadistame selle "
-#~ "uuesti."
-
-#~ msgid "New"
-#~ msgstr "Uus"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Eemalda"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Palun valige partitsioon"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Mitmeselt mőistetav (%s), palun täpsustage\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (vaikimisi %s) "
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "Teie valik? (vaikimisi %s, `none' - ei midagi)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "ei saa lugeda faili /etc/sysconfig/autologin: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "Kas soovite vőrguühendust taaskäivitada?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "Kas olete nőus?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Nüüd taaskäivitan vőrguliidese:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Kas olete valmis vőrguliidese %s taaskäivitamiseks?"
-
-#, fuzzy
-#~ msgid ""
-#~ "Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n"
-#~ "(primary master IDE disk) or \"/dev/sda\" (first SCSI disk)."
-#~ msgstr ""
-#~ "Tavaline valik on \"/dev/hda\" (esimese IDE kanali master), kui Te ei\n"
-#~ "tea täpselt, et tahate teisiti teha."
-
-#, fuzzy
-#~ msgid "Connection timeout (in sec) [ beta, not yet implemented ]"
-#~ msgstr "Ühenduse tüüp: "
-
-#, fuzzy
-#~ msgid "Could not set \"%s\" as the default printer!"
-#~ msgstr "Valige uus vaikimisi kasutaja :"
-
-#, fuzzy
-#~ msgid "Test the mouse here."
-#~ msgstr "Palun testige hiirt"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Valige keel süsteemi installimiseks ja kasutamiseks."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Et installimist jätkata, peate nőustuma ülaltoodud "
-#~ "litsentsitingimustega.\n"
-#~ "\n"
-#~ "\n"
-#~ "Palun valige \"Nőus\", kui nőustute nendega.\n"
-#~ "\n"
-#~ "\n"
-#~ "Palun valige \"Keeldun\", kui ei pea neile tingimistele allumist "
-#~ "vőimalikuks. Installimine lőpetatakse, tegemata Teie süsteemis muutusi."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Valige klaviatuuripaigutus ülaltoodud nimekirjast"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Kui soovite, et peale installimist oleks vőimalik kasutada veel "
-#~ "erinevaid\n"
-#~ "keeli, valige need ülaltoodud nimekirjast. Valik \"Kőik\" lisab toe\n"
-#~ "kőigile keeltele."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Valige:\n"
-#~ "\n"
-#~ " - Isetehtud: Olete Linuxiga tuttav ja soovite süsteemi kohandada "
-#~ "vastavalt\n"
-#~ " Teie vajadustele. Järgmisena saate teha valikud sőltuvalt Teie "
-#~ "arvuti \n"
-#~ " edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ " süsteemi, mis sobiks nagu valatult Teie täpsete ootustega.\n"
-#~ " Aga palun, palun: ÄRGE VALIGE SEDA, KUI TE TÄPSELT EI TEA, MIDA TEETE!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ " at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ " will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ " or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ " SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ " server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Nüüd määrake oma arvuti peamne kasutusala. Valikud on:\n"
-#~ "\n"
-#~ "* Tööjaam: valige, kui kavatsete oma arvutit rakendada igapäevategemiste "
-#~ "tarvis (kontorirakendused,\n"
-#~ " graafika ja muu selline).\n"
-#~ "\n"
-#~ "\n"
-#~ "* Arendus: installitakse täiskomplekt vahendeid eri programmeerimiskeelte "
-#~ "kasutamiseks, allikkoodi loomiseks,\n"
-#~ " kompileerimiseks, silumiseks jne.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: valige see, kui vajate Mandrake Linux serverit. Saate "
-#~ "serveerida faile (NFS vői SMB), printida\n"
-#~ " (Unixi stiilis lp vői Windowsi SMB), lisaks andmebaasid, "
-#~ "veebirakendused jms. Installimata\n"
-#~ " jäetakse graafiline kasutajaliides (KDE, GNOME...)."
-
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Nüüd vőite valida paketigruppe installimiseks vői uuendamiseks\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX kontrollib, kas Teil on ikka piisavalt vaba ruumi nende kőigi "
-#~ "jaoks.\n"
-#~ "kui mitte, hoiatab ta Teid. Kui Te hoiatusest ei hooli jäetakse "
-#~ "automaatselt\n"
-#~ "kőrvale vähemolulised paketid.\n"
-#~ "Nimekirja lőpus saate valida \"Valik paketthaaval\"; sel juhul aga peate\n"
-#~ "läbi sirvima üle 1000 üksiku paketi..."
-
-#~ msgid ""
-#~ "You can now choose individually all the packages you\n"
-#~ "wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can expand or collapse the tree by clicking on options in the left "
-#~ "corner of\n"
-#~ "the packages window.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you prefer to see packages sorted in alphabetic order, click on the "
-#~ "icon\n"
-#~ "\"Toggle flat and group sorted\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want not to be warned on dependencies, click on \"Automatic\n"
-#~ "dependencies\". If you do this, note that unselecting one package may "
-#~ "silently\n"
-#~ "unselect several other packages which depend on it."
-#~ msgstr ""
-#~ "Nüüd saate pakette ükshaaval installimiseks valida\n"
-#~ "\n"
-#~ "\n"
-#~ "Paketipuud saate avada ja sulgeda vasakpoolses nurgas asuvatest nuppudest."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Kui Teil on olemas kőik ülaltoodud CD-d, klikkige <OK>.\n"
-#~ "Kui Teil ei ole ühtki neist, klikkige <Katkesta>.\n"
-#~ "Kui puuduvad mőned CD-d, jätke märgituks vaid olemasolevad ja siis <OK>."
-
-#~ msgid ""
-#~ "If you wish to connect your computer to the Internet or\n"
-#~ "to a local network please choose the correct option. Please turn on your "
-#~ "device\n"
-#~ "before choosing the correct option to let DrakX detect it automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you do not have any connection to the Internet or a local network, "
-#~ "choose\n"
-#~ "\"Disable networking\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you wish to configure the network later after installation, or if you "
-#~ "have\n"
-#~ "finished to configure your network connection, choose \"Done\"."
-#~ msgstr ""
-#~ "Kui soovite oma arvuti ühendada Internetti vői kohtvőrku, tehke palun\n"
-#~ "őige valik. Välise seadme korrektseks tuvastamiseks on vajalik, et see "
-#~ "oleks\n"
-#~ "sisse lülitatud ja arvutiga ühendatud\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Te ei soovi vőrguühendust kasutada, valige \"Keela vőrguühendus\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite vőrguühenduse seadistada hiljem, valige \"Tehtud\"."
-
-#~ msgid ""
-#~ "No modem has been detected. Please select the serial port on which it is "
-#~ "plugged.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, the first serial port (called \"COM1\" under Microsoft\n"
-#~ "Windows) is called \"ttyS0\" under Linux."
-#~ msgstr ""
-#~ "Modemit ei leitud. Palun valige seerialport, kuhu see on ühendatud.\n"
-#~ "\n"
-#~ "\n"
-#~ "Igaks juhuks: esimese seerialpordi (\"COM1\" Microsoft Windowsis) nimi\n"
-#~ "on GNU/Linux süsteemis \"ttyS0\"."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you don't know\n"
-#~ "or are not sure what to enter, the correct informations can be obtained "
-#~ "from\n"
-#~ "your Internet Service Provider. If you do not enter the DNS (name "
-#~ "server)\n"
-#~ "information here, this information will be obtained from your Internet "
-#~ "Service\n"
-#~ "Provider at connection time."
-#~ msgstr ""
-#~ "Sisestage sissehelistamiskeskuse andmed. Kui Te neid ei tea\n"
-#~ "vői kahtlete, saate oma teenusepakkujalt (ISP-l) kindlasti abi.\n"
-#~ "Näiteks info nimeserveri (DNS) kohta saab tavaliselt ühenduse\n"
-#~ "loomise ajal automaatselt"
-
-#~ msgid ""
-#~ "If your modem is an external modem, please turn on it now to let DrakX "
-#~ "detect it automatically."
-#~ msgstr ""
-#~ "Kui Teil on väline modem, siis lülitage see palun nüüd sisse, et DrakX "
-#~ "saaks seda tuvastada."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Palun lülitage modem sisse ja valige nimekirjast őige."
-
-#~ msgid ""
-#~ "If you are not sure if informations above are\n"
-#~ "correct or if you don't know or are not sure what to enter, the correct\n"
-#~ "informations can be obtained from your Internet Service Provider. If you "
-#~ "do not\n"
-#~ "enter the DNS (name server) information here, this information will be "
-#~ "obtained\n"
-#~ "from your Internet Service Provider at connection time."
-#~ msgstr ""
-#~ "Kui Te ei ole kindlad, et ülaltoodud informatsioon vastab tőele\n"
-#~ "vői Te ei tea, mida sisestada, küsige abi oma internetiteenuse pakkujalt\n"
-#~ "(ISP-lt). Näiteks info nimeserveri (DNS) kohta saab tavaliselt ühenduse\n"
-#~ "loomise ajal automaatselt"
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Nüüd sisestage oma arvuti nimi, kui see on vajalik. Kui kahtlete, siis "
-#~ "peaksite küsima lisainformatsiooni oma ISP käest."
-
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ " * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ " You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ " ask your network administrator.\n"
-#~ "\n"
-#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ " \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Vőrguliidese seadistamiseks on vajalik:\n"
-#~ "\n"
-#~ " * IP-aadress: kui Te seda ei teha, küsige oma vőrguhaldurilt vői\n"
-#~ "internetiteenuse pakkujalt (ISP).\n"
-#~ "\n"
-#~ " * Vőrgumask: \"255.255.255.0\" on tavaliselt sobiv. Igaks juhuks "
-#~ "vőite\n"
-#~ "vőrguhalduri vői ISP käest üle küsida.\n"
-#~ "\n"
-#~ " * Automaatne IP: Kui Teie vőrgus on kasutusel BOOTP vői DHCP.\n"
-#~ "Selle valimisel ei pea välja \"IP-aadress\" täitma. Kui kahtlete\n"
-#~ "küsige jällegi oma vőrguhaldurilt vői ISP-lt."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Kui Teie vőrgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
-#~ "korral\n"
-#~ "küsige vőrguhaldurilt."
-
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, leave blank."
-#~ msgstr ""
-#~ "Kui vaja, sisestage oma süsteemi nimi. Kui Teil ei\n"
-#~ "ole ühtki head mőtet, jätke see rida tühjaks"
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Nüüd sisestage oma sissehelistamisteenuse pakkuja andmed. Kui ei ole "
-#~ "kindel,\n"
-#~ "mida kuhu sisestada, küsige oma ISP käest üle."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Kui peate kasutama vahendajaid (tulemüüri vms), seadistage need nüüd. "
-#~ "Kui\n"
-#~ "kahtlete, on abiks vőrguhaldur vői ISP"
-
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Krüptopakette saate installida pärast Internetiühenduse seadistamist.\n"
-#~ "Esmalt valige peegel, kust soovite pakette alla laadida ja seejärel\n"
-#~ "valige paketid.\n"
-#~ "\n"
-#~ "\n"
-#~ "Märkus: krüptopakettide valimisel peate arvesse vőtma ka vőimalikke\n"
-#~ "őiguslikke piiranguid oma asukohamaal."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr "Nüüd saate valida ajavőőtme vastavalt oma asukohale."
-
-#~ msgid ""
-#~ "You can configure a local printer (connected to your computer) or remote\n"
-#~ "printer (accessible via a Unix, Netware or Microsoft Windows network)."
-#~ msgstr ""
-#~ "Teil on vőimalus seadistada kas kohalik (Teie arvutiga ühendatud) vői\n"
-#~ "vőrguprinter (Unix, Netware vői Microsoft Windows vőrgus)"
-
-#~ msgid ""
-#~ "If you wish to be able to print, please choose one printing system "
-#~ "between\n"
-#~ "CUPS and LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS is a new, powerful and flexible printing system for Unix systems "
-#~ "(CUPS\n"
-#~ "means \"Common Unix Printing System\"). It is the default printing system "
-#~ "in\n"
-#~ "Mandrake Linux.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR is the old printing system used in previous Mandrake Linux "
-#~ "distributions.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't have printer, click on \"None\"."
-#~ msgstr ""
-#~ "Kui soovite vahetevahel printida, valige palun selleks sobiv meetod, "
-#~ "CUPS\n"
-#~ "vői LPR.\n"
-#~ "\n"
-#~ "\n"
-#~ "CUPS on uus, vőimas ja paindlik printimissüsteem Unix keskkonnas (CUPS -\n"
-#~ "Common Unix Printing System). Mandrake Linux kasutab vaikimisi seda.\n"
-#~ "\n"
-#~ "\n"
-#~ "LPR on vanem meetod, mis oli kasutusel ka eelmistest Mandrake Linux\n"
-#~ "distributsioonides.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teil ei olegi printerit, valige \"Ei soovi\"."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these types "
-#~ "requires\n"
-#~ "a different setup.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select \"Local\n"
-#~ "printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine, select\n"
-#~ "\"Remote printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Microsoft Windows "
-#~ "machine\n"
-#~ "(or on Unix machine using SMB protocol), select \"SMB/Windows 95/98/NT\"."
-#~ msgstr ""
-#~ "GNU/Linux oskab toimetada mitut tüüpi printeritega. Igaüht neist "
-#~ "seadistatakse\n"
-#~ "erinevalt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teie printer on füüsiliselt arvutiga ühendatud, valige \"Kohalik "
-#~ "printer\"\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada vőrguprinterit Unix serveril, valige \"Vőrguprinter"
-#~ "\".\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada vőrguprinteri Windows serveril (vői muidu üle SMB\n"
-#~ "protokolli), valige \"SMB/Windows 95/98/NT\"."
-
-#~ msgid ""
-#~ "Please turn on your printer before continuing to let DrakX detect it.\n"
-#~ "\n"
-#~ "You have to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of printer: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you must have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer a more meaningful name, you "
-#~ "have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Description: this is optional but can be useful if several printers "
-#~ "are connected to your computer or if you allow\n"
-#~ " other computers to access to this printer.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Location: if you want to put some information on your\n"
-#~ " printer location, put it here (you are free to write what\n"
-#~ " you want, for example \"2nd floor\").\n"
-#~ msgstr ""
-#~ "Palun lülitage oma printer sisse ja laske DrakX-il seda tuvastade.\n"
-#~ "\n"
-#~ "Samuti on vaja sisestada lisainformatsiooni:\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
-#~ "peab Teil olema vähemalt ühe printeri nimi \"lp\".\n"
-#~ " Kui Teil ongi ainult üks printer, saate sellele anda ka mitu nime. "
-#~ "Nimed peavad olema eraldatud sümboliga \"|\"\n"
-#~ " Seega, kui soovite, et nimel oleks ka mingi tähendus, kirjutage "
-#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
-#~ " Printer, mille nimede hulgas on \"lp\", saab olema Teie süsteemi "
-#~ "jaoks vaikimisi printeriks.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Kirjeldus: see ei ole kohustuslik, kuid vőib osutuda vajalikuks, kui "
-#~ "Teil on näiteks mitu kohalikku printerit ja soovite neid vőrgus välja "
-#~ "jagada\n"
-#~ "\n"
-#~ "\n"
-#~ " * Asukoht: kui soovite anda täiendavat informatsiooni printeri "
-#~ "asukohast\n"
-#~ " Näiteks: \"Teise korruse keskel\".\n"
-
-#~ msgid ""
-#~ "You need to enter some informations here.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Name of queue: the print spooler uses \"lp\" as default printer "
-#~ "name. So, you need have a printer named \"lp\".\n"
-#~ " If you have only one printer, you can use several names for it. You "
-#~ "just need to separate them by a pipe\n"
-#~ " character (a \"|\"). So, if you prefer to have a more meaningful "
-#~ "name, you have to put it first, eg: \"My printer|lp\".\n"
-#~ " The printer having \"lp\" in its name(s) will be the default "
-#~ "printer.\n"
-#~ "\n"
-#~ " \n"
-#~ " * Spool directory: it is in this directory that printing jobs are "
-#~ "stored. Keep the default choice\n"
-#~ " if you don't know what to use\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printer Connection: If your printer is physically connected to your "
-#~ "computer, select \"Local printer\".\n"
-#~ " If you want to access a printer located on a remote Unix machine, "
-#~ "select \"Remote lpd printer\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to access a printer located on a remote Microsoft "
-#~ "Windows machine (or on Unix machine using SMB\n"
-#~ " protocol), select \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " If you want to acces a printer located on NetWare network, select "
-#~ "\"NetWare\".\n"
-#~ msgstr ""
-#~ "Nüüd on vaja lisainformatsiooni.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printeri nimi: spuuler kasutab vaikimisi printerit \"lp\". Seega "
-#~ "peab Teil olema vähemalt ühe printeri nimi \"lp\".\n"
-#~ " Kui Teil ongi ainult üks printer, saate sellele anda ka mitu nime. "
-#~ "Nimed peavad olema eraldatud sümboliga \"|\"\n"
-#~ " Seega, kui soovite, et nimel oleks ka mingi tähendus, kirjutage "
-#~ "nimeks midagi niisugust: \"Minu printer|lp\".\n"
-#~ " Printer, mille nimede hulgas on \"lp\", saab olema Teie süsteemi "
-#~ "jaoks vaikimisi printeriks.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Spuulkataloog: kataloog, kus spuuler hoiab ajutisi faile enne "
-#~ "printimist. Seda ei ole soovitav muuta.\n"
-#~ "\n"
-#~ "\n"
-#~ " * Printeri ühendusviis: Kui Teie printer on füüsiliselt Teie arvuti "
-#~ "küljes, valige \"Kohalik printer\".\n"
-#~ " Kui soovite kasutada printerit UNIX serveri küljes, valige \"lpd "
-#~ "printserver\".\n"
-#~ "\n"
-#~ "\n"
-#~ " Kui soovite kasutada printerit Microsoft Windows vőrgus (vői SMB "
-#~ "serveril) valige \"SMB/Windows 95/98/NT\".\n"
-#~ "\n"
-#~ "\n"
-#~ " Kui soovite kasutada NetWare serveril asuvat printerit, valige "
-#~ "\"NetWare\".\n"
-
-#~ msgid ""
-#~ "Your printer has not been detected. Please enter the name of the device "
-#~ "on\n"
-#~ "which it is connected.\n"
-#~ "\n"
-#~ "\n"
-#~ "For information, most printers are connected on the first parallel port. "
-#~ "This\n"
-#~ "one is called \"/dev/lp0\" under GNU/Linux and \"LPT1\" under Microsoft "
-#~ "Windows."
-#~ msgstr ""
-#~ "Teie printerit ei őnnestunud tuvastada. Palun abistavat infot vőimaliku\n"
-#~ "ühenduspistiku kohta.\n"
-#~ "\n"
-#~ "\n"
-#~ "Enamasti on printer ühendatud esimesse paralleelporti. GNU/Linuxis on "
-#~ "selle\n"
-#~ "nimeks \"/dev/lp0\" ja Microsoft Windowsis \"LPT1\"."
-
-#~ msgid "You must now select your printer in the above list."
-#~ msgstr "Valige printer ülaltoodud nimekirjast."
-
-#~ msgid ""
-#~ "Please select the right options according to your printer.\n"
-#~ "Please see its documentation if you don't know what choose here.\n"
-#~ "\n"
-#~ "\n"
-#~ "You will be able to test your configuration in next step and you will be "
-#~ "able to modify it if it doesn't work as you want."
-#~ msgstr ""
-#~ "Palun valige oma printerile sobivad sätted.\n"
-#~ "Abi saate ilmselt ka printeri dokumentatsioonist.\n"
-#~ "\n"
-#~ "\n"
-#~ "Järgmisel sammul saate oma seadistusi testida ja soovi korral muuta, kui "
-#~ "midagi ei tööta nagu vaja."
-
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Nüüd peate sisestama süsteemi juurkasutaja (root) parooli. Et vähendada\n"
-#~ "eksimisvőimalust, tehke seda kaks korda.\n"
-#~ "\n"
-#~ "\n"
-#~ "Juurkasutaja on süsteemi tähtsaim kasutaja ja ainuke, kes tohib teha\n"
-#~ "muudatusi süsteemi sätetesse. Seepärast valige juurkasutaja parooli "
-#~ "erilise\n"
-#~ "hoolega.\n"
-#~ "\n"
-#~ "Hea salasőna peaks olema kombinatsioon tähtedest ja numbritest \n"
-#~ "ning vähemalt 8 märki pikk. Ärge *kunagi* kirjutage oma parooli üles!\n"
-#~ "\n"
-#~ "\n"
-#~ "Samas ei peaks see olema liiga pikk ja keeruline meelde jätmiseks."
-
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Nüüd saate luua ühe vői rohkem \"tavakasutaja\" kontot. Äärmiselt "
-#~ "soovitav\n"
-#~ "on luua igale arvuti kasutajale eraldi konto(d). Sel viisi saab iga "
-#~ "kasutaja\n"
-#~ "valida ise endale sobiva graafilise keskkonna kujunduse ja programmide "
-#~ "sätted.\n"
-#~ "Kőik kasutaja failid saavad hoitud ja kaitstud tema isiklikus "
-#~ "kodukataloogis.\n"
-#~ "\n"
-#~ "\n"
-#~ "Esmalt looge konto iseendale, ka siis kui olete süsteemi ainuke "
-#~ "kasutaja.\n"
-#~ "Ärge tehke oma igapäevatoimetusi juurkasutajana, suurendades sel viisil\n"
-#~ "turvariski! Vale juurkasutaja näpuliigutus vőib süsteemi kergesti\n"
-#~ "kasutuskőlbmatuks muuta!\n"
-#~ "\n"
-#~ "\n"
-#~ "Juurkasutaja őigused on ainult administreerimiseks ja hoolduseks,\n"
-#~ "kőike muud tehke palun tavakasutajana"
-
-#~ msgid ""
-#~ "Creating a boot disk is strongly recommended. If you can't\n"
-#~ "boot your computer, it's the only way to rescue your system without\n"
-#~ "reinstalling it."
-#~ msgstr ""
-#~ "Alglaadimisketta loomine on äärmiselt soovitatav. Kui peaks kunagi\n"
-#~ "tekkima probleeme süsteemi laadimisel, vői alglaadmisketas olla Teie\n"
-#~ "ainuke pääsetee uue installimise kőrval."
-
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "LILO ja grub-i peamised suvandid on:\n"
-#~ " - Alglaadimisseade: määratakse kővaketas vői partitsioon, kus asub\n"
-#~ "alglaadimissektor. Kui Te just täpselt ei tea, mida teete,\n"
-#~ "\"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ooteaeg alglaadimisel: määratakse ooteaeg sekundikümnendikes enne\n"
-#~ "vaikimisi laadimist.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Graafikamood: määratakse VGA tekstmood süsteemi laadimisel. "
-#~ "Vőimalikud\n"
-#~ "on järgmised valikud:\n"
-#~ "\n"
-#~ " * normal: tavaline 80x25 tekstimood\n"
-#~ "\n"
-#~ " * <number>: numbrile vastav tekstimood. - Puhasta /tmp "
-#~ "alglaadimisel: kui soovite kustutada süsteemi alglaadimisel,\n"
-#~ "valige see\n"
-#~ "\n"
-#~ "\n"
-#~ " - Täpsust RAM hulk kui vajalik: kahjuks ei ole ühtki standardset "
-#~ "meetodit Teie\n"
-#~ "arvutis leiduva operatiivmälu (RAM) koguse äraarvamiseks. Kui siinkohal "
-#~ "on eksimine\n"
-#~ "2 vői 4 MB, siis ei maksa sellele väga tähelepanu pöörata."
-
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "SILO on alglaadur SPARC arhitektuurile: see vőimaldab laadida\n"
-#~ "kas GNU/Linuxi vői mőne muu Teie arvutis oleva operatsioonisüsteemi.\n"
-#~ "Tavaliselt tuvastakse teised operatsioonisüsteemid őigesti ja seadista-\n"
-#~ "takse ka alglaadur. Kui Teil aga ei ole őnne, tuleb parameetrid seada\n"
-#~ "käsitsi. Olge sel juhul hoolas valima őiged."
-
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ " - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "SILO peamised suvandid on:\n"
-#~ " - Alglaaduri paigaldus: määratakse kővaketas vői partitsioon, kus "
-#~ "soovite\n"
-#~ "hoida GNU/Linuxi laadimiseks vajalikku infot. Kui Te just täpselt ei "
-#~ "tea,\n"
-#~ "mida teete, valige \"Kővaketta esimene sektor (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ooteaeg alglaadimisel: määratakse aeg sekundikümnendikes enne "
-#~ "vaikimisi\n"
-#~ "laadimist."
-
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "On aeg konfigureerida \"X Window System\" ehk lihtsalt X. X on\n"
-#~ "GNU/Linuxi graafilise kasutajaliidese süda. Sel eesmärgil peame koos\n"
-#~ "seadistama Teie graafikakaardi ja monitori. Enamus sellest protsessist\n"
-#~ "on automatiseeritud ja Teie ülesandeks on ainult DrakX-i\n"
-#~ "valikutega nőustuda (vői mitte :))\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui saame seadistamisega hakkama, käivitakse X (kui Te ei anna\n"
-#~ "eraldi käsku mitte nii teha)."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Kui midagi on X-i seadistustega valesti, saab siinkohal vőimalikke vigu\n"
-#~ "parandada."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Kui eelistate graafilist süsteemi sisenemist, valige \"Jah\". "
-#~ "Konsoolimoodi\n"
-#~ "eelistamisel valige \"Ei\"."
-
-#~ msgid ""
-#~ "You can choose a security level for your system. Please refer to the "
-#~ "manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ msgstr ""
-#~ "Nüüd saate valida oma süsteemis kasutatava turvataseme. Palun vaadake "
-#~ "lisainfot selle kohta ka\n"
-#~ " kasutajajuhendist. Üldiselt, kui Te ei tea, mida teete, jätke siia "
-#~ "vaikimisi valik.\n"
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "Teie süsteem sooritab alglaadimise.\n"
-#~ "\n"
-#~ "Taaskäivitumisel laaditakse Teie uus Mandrake Linux süsteem "
-#~ "automaatselt.\n"
-#~ "Kui soovite laadida mőnd muud operatsioonisüsteemi, lugege palun\n"
-#~ "lisainformatsiooni."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Tđehhi (programmeerijad)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Slovaki (programmeerijad)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Loodava profiili nimi:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Kirjuta /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Vorminda kőik"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Pärast kőigi partitsioonide vormindamist"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "on kőik andmed neil partitsioonidel hävivad"
-
-#~ msgid "Reload"
-#~ msgstr "Laadi uuesti"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr "Kas soovite luua kiirpaigaldusflopi (abiks korduval paigaldusel)?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "ADSL sätted"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Kui vőrgus on CUPS server, siis ei ole Teil vaja siin\n"
-#~ "printereid seadistada, need leitakse automaatselt.\n"
-#~ "Kui server asub kuskil kaugemal, peate sisestama CUPS serveri\n"
-#~ "IP-aadress ning soovitavalt ka pordi numbri."
-
-#~ msgid "Remote queue"
-#~ msgstr "Prindijärjekorra nimi"
-
-#, fuzzy
-#~ msgid "Remote queue name missing!"
-#~ msgstr "Prindijärjekorra nimi"
-
-#, fuzzy
-#~ msgid "Command line"
-#~ msgstr "Domeeninimi"
-
-#, fuzzy
-#~ msgid "Modify printer"
-#~ msgstr "Printerit ei ole"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Vőrgusätted"
-
-#~ msgid "Profile "
-#~ msgstr "Profiil "
-
-#, fuzzy
-#~ msgid "Connection Time: "
-#~ msgstr "Ühenduse tüüp: "
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Loo internetiühendus"
-
-#, fuzzy
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Katkesta internetiühendus"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Katkesta internetiühendus"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Katkesta internetiühendus"
-
-#, fuzzy
-#~ msgid "Connection complete."
-#~ msgstr "Ühenduse nimi"
-
-#, fuzzy
-#~ msgid "average"
-#~ msgstr "rämps"
-
-#, fuzzy
-#~ msgid "Default Runlevel"
-#~ msgstr "Vaikimisi"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Sätete fail ei ole arusaadav."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Tundmatu sättefaili"
-
-#~ msgid "Adapter"
-#~ msgstr "Vőrgukaart"
-
-#~ msgid "Disable network"
-#~ msgstr "Keela vőrguühendus"
-
-#, fuzzy
-#~ msgid "Enable network"
-#~ msgstr "Keela vőrguühendus"
-
-#~ msgid ""
-#~ "You can now test your mouse. Use buttons and wheel to verify\n"
-#~ "if settings are good. If not, you can click on \"Cancel\" to choose "
-#~ "another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "Nüüd saate oma hiirt testida. Kasutage nii nuppe kui ratast. Kui tundub\n"
-#~ "midagi valesti olevat, klikkige <Katkesta> uue juhtprogrammi valimiseks."
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "DSL (vői ADSL) ühendus"
-
-#, fuzzy
-#~ msgid "Choose"
-#~ msgstr "Hiir"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr "Vőite anda ette ka URI, mille järgi CUPS printeri leiab."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Jah, trüki ASCII testlehekülg"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Jah, trüki PostSript testlehekülg"
-
-#~ msgid "Paper Size"
-#~ msgstr "Paberi suurus"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "Töö lőpetamisel väljasta kogu leht?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Kas optimiseerime kővaketast?"
-
-#~ msgid "Color depth options"
-#~ msgstr "Mooduli parameetrid:"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "Trükkida tekst PostScriptina?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "Paranda trepitud tekst?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Lehekülgi ühel paberil"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Lehe laiuse märgid punktides (1/72 tollile)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Lehe kőrguse märgid punktides (1/72 tollile)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Lisa GhostScript parameetrid"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Lisa teksti parameetrid"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Viimane leht enne"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Vali vőrguprinteri ühendusviis"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Masinal vőib olla mitu printerit, millest igaüks vajab nime\n"
-#~ "(sageli lp) ja printkataloogi. Millist nime peaks kasutama\n"
-#~ "kasutama selle printeri puhul ja kuidas see on ühendatud?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Masinal vőib olla mitu prindijärjekorda, millest igaüks vajab nime\n"
-#~ "(sageli lp) ja spuulkataloogi (ajutiste failide jaoks). Millist nime\n"
-#~ "ja kataloogi peaks kasutama selle printeri puhul ja kuidas see on "
-#~ "ühendatud?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Printeri nimi"
-
-#~ msgid "Spool directory"
-#~ msgstr "Spuulkataloog"
-
-#~ msgid "Disable"
-#~ msgstr "Keela"
-
-#~ msgid "Enable"
-#~ msgstr "Luba"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "LAN sätted"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Teenusepakkuja DNS 1"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Teenuspakkuja DNS 2"
-
-#, fuzzy
-#~ msgid "fsck failed: "
-#~ msgstr "ühendamine ebaőnnestus: "
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Turvalisema süsteemi saamiseks peaksite valima \"Kasuta varjutatud \n"
-#~ "paroolifaili\" ja \"Kasuta parooli kaitsmiseks MD5 algoritmi\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Kui Teie vőrgus on kasutusel NIS, valige \"Kasuta NIS-i\". Kahtluse "
-#~ "korral\n"
-#~ "küsige vőrguhaldurilt."
-
-#~ msgid "yellow pages"
-#~ msgstr "NIS YP"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "Kuidas soovite luua internetiühendust?"
-
-#~ msgid "Configure..."
-#~ msgstr "Seadista..."
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Valitud suurus %d%s"
-
-#~ msgid "Opening your connection..."
-#~ msgstr "Testime Teie ühendust..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "Seadistused: Lisa asukoht"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr "See skript proovib seadistada USB hiirt"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Alglaadimise stiil"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Nüüd on internetiühendus seadistatud aga Teie arvutit\n"
-#~ "saab panna ka seda jagama teistele arvutitele kohtvőrgus.\n"
-#~ "Märkus: kohtvőrgu jaoks on vajalik eraldi vőrgukaardi olemasolu\n"
-#~ "\n"
-#~ "Kas soovite internetiühendust jagada?\n"
-
-#~ msgid "Welcome to the Internet Connection Sharing utility!"
-#~ msgstr "Internetiühenduse jagamine"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Automaatsed sőltuvused"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "LILO/GRUB seadistamine"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Loo alglaadimisflopi"
-
-#~ msgid "Choice"
-#~ msgstr "Valik"
-
-#~ msgid "horizontal nice looking aurora"
-#~ msgstr "horisontaalne kena aurora"
-
-#~ msgid "vertical traditional aurora"
-#~ msgstr "vertikaalne tavaline aurora"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ " chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ " you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ " your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ " specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ " present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ " typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ " select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ " should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Nüüd saate valida mitmesuguseid süsteemi käitumise vőimalusi.\n"
-#~ "\n"
-#~ "* Optimiseeri kővaketast: selle variandi puhul saate kiirendada\n"
-#~ " kővaketta poole pöördumist, kuid teatud vigaste emaplaatide puhul \n"
-#~ " vőite kővaketta rikkuda. Valige, kui olete endas kindel.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Valige turvatase: saate valida oma süsteemi turvalisuse taseme.\n"
-#~ " Palun vaadake manuaali, et saada turvatasemetest täielik ülevaade.\n"
-#~ " Kui kahtlete, valige \"Keskmine\", et saada tőesti turvalist süsteemi,\n"
-#~ " valige \"Paranoiline\" aga olge ettevaatlik, näiteks EI SAA SELLEL "
-#~ "TASEMEL\n"
-#~ " JUURKASUTAJA SISSE LOGIDA! Peate kasutama käsku 'su'. Mida "
-#~ "turvalisem, \n"
-#~ " seda keerulisem kasutada!\n"
-#~ "\n"
-#~ "* Täpsusta operatiivmälu mahtu: vőib esineda olukord, kus GNU/Linux ei\n"
-#~ " ole suuteline detekteerima täpselt operatiivmälu suurust. Kui see on\n"
-#~ " nii juhtunud, saate öelda ette tegeliku mäluhulga. Paneme tähele, et\n"
-#~ " erinevus 2-4MB tuvastatud ja tegeliku mälu hulga vahel on normaalne.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Irdandmekandjate automaatne ühendamine (supermount): Teie flopid, CD-d\n"
-#~ " ja Zip-kettad ühendatakse automaatselt (ilma mount/umount kasutamata)\n"
-#~ "\n"
-#~ "\n"
-#~ "* Puhasta \"/tmp\" alglaadimisel: süsteemi laadimisel kustutatakse kőik "
-#~ "failid \"/tmp\" kataloogist.\n"
-#~ "\n"
-#~ "* Vőimalda NumLock alglaadimisel: süsteemi laadimisel muudetakse\n"
-#~ " konsoolimoodis NumLock aktiivseks"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr "Vabandan, aga meili seadistamine ei ole praegu veel vőimalik."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "See siin on vőrguühenduse abimees.\n"
-#~ "Mis komponente soovite seadistada?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Internetiühendus"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Muud sätted"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Muud küsimused"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Kőrgel turvatasemel ei saa supermount-i kasutada"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "SELLEL TURVATASEMEL EI OLE VŐIMALIK SÜSTEEMI SISENEDA JUURKASUTAJANA!\n"
-#~ "Juurkasutaja őiguste saamiseks tuleb siseneda tavakasutajana ja siis \n"
-#~ "kasutada \"su\"-d.\n"
-#~ "Serveri puhul on selline piirang täiesti mőistlik.\n"
-#~ "Teid on igal juhul hoiatatud."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Olge ettevaatlik, NumLock-i kasutamine vőib pőhjustada (eriti kantavatel\n"
-#~ "arvutitel) probleeme."
-
-#~ msgid "not connected"
-#~ msgstr "ei ole ühendatud"
-
-#~ msgid "Actions"
-#~ msgstr "Tegevused"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Teadusrakendused"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Server, Faili/prindi/samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "Server, DNS/DHCP"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Esimene nimeserver:"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Teine nimeserver:"
-
-#~ msgid "using module"
-#~ msgstr "kasutades moodulit"
-
-#~ msgid "Development, Database"
-#~ msgstr "Arendus, Andmebaasid"
-
-#~ msgid "Development, Integrated Environment"
-#~ msgstr "Arendus, Graafilised keskkonnad"
-
-#~ msgid "Development, Standard tools"
-#~ msgstr "Arendus, standardvahendid"
-
-#~ msgid ""
-#~ "\n"
-#~ "Warning:\n"
-#~ "Applying the changes while running may crash your X environnement."
-#~ msgstr ""
-#~ "\n"
-#~ "Hoiatus:\n"
-#~ "Muudatuste rakendamine vőib X keskkonna endast välja viia."
-
-#~ msgid ""
-#~ "\n"
-#~ "If you continue, I will shut down your %s environnement"
-#~ msgstr ""
-#~ "\n"
-#~ "Jätkamisel olen sunnitud Teie %s keskkonna seiskama"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Millist alglaadurit soovite kasutada?"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Kiirpaigaldusflopi"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Kas otsida modemit?"
-
-#~ msgid "Configure an ISDN connection"
-#~ msgstr "Seadista ISDN ühendus"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Keela ühendus Internetti"
-
-#~ msgid "Configure local network"
-#~ msgstr "Kohtvőrgu seadistamine"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Seadista internetiühendus / Seadista kohtvőrk"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "Kohtvőrk on juba seadistatud.\n"
-#~ "Kas soovite:"
-
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Seadistan uuesti abimehega..."
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Graafikaprogrammid"
-
-#~ msgid "Sciences"
-#~ msgstr "Teadused"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Jututamise (IRC vői IM) programmid xchat, licq, gaim ja failiülekande "
-#~ "vahendid"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Suhtlemisvahendid"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Interneti värgid"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Andmebaasiserveri ja -kliendid (mysql ja postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "C/C++ arendus"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Ajavöötme määramine"
-
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Esimene vőrguliides (eth0)"
-
-#~ msgid "isdn_internal"
-#~ msgstr "isdn_internal"
-
-#~ msgid "ippp0"
-#~ msgstr "ippp0"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(vőib tekitada andmete hävimist)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Lülita Num Lock käivitamisel sisse"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Salasőna uuesti"
-
-#~ msgid "default"
-#~ msgstr "tavaline"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "Milline on Teie süsteemi kasutusala?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Valige paigalduse maht"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Kasuta diskdrake-i"
-
-#~ msgid "Customized"
-#~ msgstr "Isetehtud"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "Olete ikka kindlasti ekspert? \n"
-#~ "Hei, ilma naljata, eksperdi valikud on laiemad kuid sellevőrra "
-#~ "ohtlikumad.\n"
-#~ "\n"
-#~ "Teilt küsitakse küsimusi näiteks 'paroolifaili varjutamise' jms kohta,\n"
-#~ "olete Te selleks valmis?"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Kasuta varjutatud paroolifaili"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Kasuta parooli kaitsmiseks MD5 algoritmi"
-
-#~ msgid "Search"
-#~ msgstr "Otsi"
-
-#~ msgid "Package"
-#~ msgstr "Pakett"
-
-#~ msgid "Tree"
-#~ msgstr "Puu"
-
-#~ msgid "Sort by"
-#~ msgstr "Sortimine"
-
-#~ msgid "Category"
-#~ msgstr "Kategoori"
-
-#~ msgid "Installed packages"
-#~ msgstr "Installitud paketid"
-
-#~ msgid "Available packages"
-#~ msgstr "Kättesaadavad paketid"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Näita ainult üksikuid"
-
-#~ msgid "Expand all"
-#~ msgstr "Ava kőik"
-
-#~ msgid "Collapse all"
-#~ msgstr "Sule kőik"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Lisa pakettide asukoht"
-
-#~ msgid "Update location"
-#~ msgstr "Uuenda asukoht"
-
-#~ msgid "Find Package"
-#~ msgstr "Leia pakett"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Leia pakett faili järgi"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Installitud/Saadaval"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Kontrollin sőltuvusi"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Eemaldatakse järgmised paketid"
-
-#~ msgid "Regexp"
-#~ msgstr "Regulaaravaldis"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Milline pakett vajab ressurssi"
-
-#~ msgid "No match"
-#~ msgstr "Ei leitud sobivat"
-
-#~ msgid "No more match"
-#~ msgstr "Ei leitud enam sobivaid"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake on hetkel \"säästuresiimil\".\n"
-#~ "Failide otsimiseks käivitan rpmdrake uuesti"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "Millist faili Te otsite?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "Mida Te otsite?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Andke nimi (nagu: 'extra, 'commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Kataloog"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "CD-d ei leitud (vähemalt mitte /mnt/cdrom all)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL kataloogile, kus paiknevad RPM-id"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "FTP ja HTTP jaoks on vaja ka hdlist-i asukohta\n"
-#~ "See peab olema antud eelmise URLi suhtes"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Palun järgmist informatsiooni"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s on juba kasutusel"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Uuendan RPM andmebaasi"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Eemaldan kirje %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Leian ülejäägid"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "Ülejääkide leidmine vőtab veidi aega"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Leitud ISDN kaart:\n"
-
-#~ msgid "Other countries"
-#~ msgstr "Muud maad"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "Millisel maal Te praegu olete ?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Alcatel modem"
-
-#~ msgid "ECI modem"
-#~ msgstr "ECI modem"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Kui teil on Alcatel-i modem, valige Alcatel. Muidu aga ECI"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ära kasuta pppoe-d"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (tähtis)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (väga kena)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (kena)"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "Millisesse seerialporti on Teie hiir ühendatud?"
-
-#~ msgid "Czech"
-#~ msgstr "T¨ehhi"
-
-#~ msgid "Slovakian"
-#~ msgstr "Slovaki"
-
-#~ msgid "Could not install ipchains RPM with urpmi."
-#~ msgstr "Ei saa installida 'ipchains' paketti urpmi abil."
-
-#~ msgid "Could not install dhcp RPM with urpmi."
-#~ msgstr "Ei saa installida DHCP paketti urpmi abil."
-
-#~ msgid "Could not install linuxconf RPM with urpmi."
-#~ msgstr "Ei saa installida linuxconf-i urpmi abil."
-
-#~ msgid "Could not install bind RPM with urpmi."
-#~ msgstr "Ei saa installida 'bind' paketti urpmi abil."
-
-#~ msgid "Could not install caching-nameserver RPM with urpmi."
-#~ msgstr "Ei saa installida nimeserveri vahendajat urpmi abil."
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Seadista kohtvőrk uuesti"
-
-#~ msgid ""
-#~ "Your computer can be configured to share its Internet connection.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Teie arvutit saab seadistada internetiühenduse jagajana.\n"
-#~ "\n"
-
-#~ msgid "Everything has been configured.\n"
-#~ msgstr "Kőik sai seadistatud.\n"
-
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Kasuta Interneti jaoks tavamodemit"
-
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Kasuta Interneti jaoks ISDN modemit"
-
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Kasuta Interneti jaoks DSL (vői ADSL) modemit"
-
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Kasuta Interneti jaoks DOC kaablimodemit"
-
-#~ msgid ""
-#~ "Time (secs) of inactivity after which\n"
-#~ "it hangs up. (leave blank to disable it)"
-#~ msgstr ""
-#~ "Mittekasutamise aeg, mille jooksul ühendus\n"
-#~ "katkestatakse. (vaikimisi ei katkestata)"
-
-#~ msgid "Germany (1TR6)"
-#~ msgstr "Saksa (1TR6)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Mida Te soovite teha?"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Installi/Taasta"
-
-#~ msgid "Rescue"
-#~ msgstr "Taasta"
-
-#~ msgid "Which partition type do you want?"
-#~ msgstr "Mis tüüpi partitsiooni soovite?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of GNU/Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "Choose \"Rescue\" if you wish to rescue a version of Mandrake Linux "
-#~ "already installed.\n"
-#~ "\n"
-#~ "\n"
-#~ "Select:\n"
-#~ "\n"
-#~ " - Recommended: If you have never installed GNU/Linux before, choose "
-#~ "this.\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!\n"
-#~ msgstr ""
-#~ "Valige \"Installimine\" kui varem sellele masinale GNU/Linuxit ei ole "
-#~ "pandud\n"
-#~ "vői soovite kasutada mitut distributsiooni\n"
-#~ "\n"
-#~ "Valige \"Taastamine\" kui soovite taastada mőnd eelmist Mandrake "
-#~ "Linuxit:\n"
-#~ "%s vői %s.\n"
-#~ "\n"
-#~ "\n"
-#~ "Valige:\n"
-#~ "\n"
-#~ " - Soovitatav: Te pole kunagi varem GNU/Linuxit installinud. \n"
-#~ "\n"
-#~ " - Isetehtud: Olete Linuxiga tuttav ja soovite süsteemi kohandada "
-#~ "vastavalt\n"
-#~ " Teie vajadustele. Järgmisena saate teha valikud sőltuvalt Teie "
-#~ "arvuti\n"
-#~ " edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ " - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ " süsteemi, mis sobiks nagu valatult Teie täpsete ootustega.\n"
-#~ " Aga palun, palun: ÄRGE VALIGE SEDA, KUI TE TÄPSELT EI TEA, MIDA "
-#~ "TEETE!\n"
-
-#~ msgid ""
-#~ "At this point, you may choose what partition(s) to use to install\n"
-#~ "your Mandrake Linux system if they have been already defined (from a\n"
-#~ "previous install of GNU/Linux or from another partitioning tool). In "
-#~ "other\n"
-#~ "cases, hard drive partitions must be defined. This operation consists of\n"
-#~ "logically dividing the computer's hard drive capacity into separate\n"
-#~ "areas for use.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you have to create new partitions, use \"Auto allocate\" to "
-#~ "automatically\n"
-#~ "create partitions for GNU/Linux. You can select the disk for partitioning "
-#~ "by\n"
-#~ "clicking on \"hda\" for the first IDE drive,\n"
-#~ "\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n"
-#~ "\n"
-#~ "\n"
-#~ "Two common partition are: the root partition (/), which is the starting\n"
-#~ "point of the filesystem's directory hierarchy, and /boot, which contains\n"
-#~ "all files necessary to start the operating system when the\n"
-#~ "computer is first turned on.\n"
-#~ "\n"
-#~ "SEAL\n"
-#~ "Because the effects of this process are usually irreversible, "
-#~ "partitioning\n"
-#~ "can be intimidating and stressful to the unexperienced user. DiskDrake\n"
-#~ "simplifies the process so that it must not be. Consult the documentation\n"
-#~ "and take your time before proceeding.\n"
-#~ "\n"
-#~ "\n"
-#~ "You can reach any option using the keyboard: navigate through the "
-#~ "partitions\n"
-#~ "using Tab and Up/Down arrows. When a partition is selected, you can use:\n"
-#~ "\n"
-#~ "- Ctrl-c to create a new partition (when an empty partition is "
-#~ "selected)\n"
-#~ "\n"
-#~ "- Ctrl-d to delete a partition\n"
-#~ "\n"
-#~ "- Ctrl-m to set the mount point\n"
-#~ msgstr ""
-#~ "Nüüd peaksite valima partitsioon(id) Mandrake Linux installimiseks\n"
-#~ "kui need on juba varem kettale defineeritud. Kui Te varem ei ole oma\n"
-#~ "kővaketast Linuxi jaoks partitsioneerinud, saate seda järgmises etapis\n"
-#~ "teha. Partitsioneerimine tähendab füüsilise ketta jaotamist loogiliselt\n"
-#~ "eraldatud osadeks.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui ei tunne ennast sel alal kindlalt, valige \"Paiguta ise\", et\n"
-#~ "automaatselt luua Linuxile vajalikud partitsioonid.\n"
-#~ "Linuxi maailmas tähendab \"hda\" esimest, \"hdb\" teist IDE kővaketast,\n"
-#~ "\"sda\" esimest. \"sdb\" teist SCSI kővaketast jne. Partitsioneerimiseks\n"
-#~ "valige kettaseade lihtsalt sellel klikkides.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kaks tavalist partitsiooni on juurpartitsioon (/), kus asub "
-#~ "failisüsteemi\n"
-#~ "hierarhia algus ja /boot, mis sisaldab arvuti alglaadimiseks vajalikke "
-#~ "faile, sealhulgas Linuxi kernelit.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kuna partitsioneerimine ei ole pööratav protsess, vőib see tekitada\n"
-#~ "algajas kerget kőhedust. DiskDrake on selle teinud küll lihtsamaks,\n"
-#~ "aga kindlasti tuleks enne iga liigutust sügavalt järele mőtelda ja\n"
-#~ "soovitavalt ka dokumentatsiooniga tutvuda.\n"
-#~ "\n"
-#~ "Kőiki tegevusi saate teha ka ainult klaviatuuri kasutades: liikuge\n"
-#~ "partitsioonidel <TAB> ja üles-alla noolte abil. Partitsiooni valikul\n"
-#~ "\n"
-#~ "- Ctrl-C loob uue partitsiooni (valige selleks vaba kettaala)\n"
-#~ "- Ctrl-D kustutab partitsiooni\n"
-#~ "\n"
-#~ "- Ctrl-M seab ühenduspunkti\n"
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for\n"
-#~ "use (formatting meaning creating a filesystem). At this time, you may\n"
-#~ "wish to re-format some already existing partitions to erase the data\n"
-#~ "they contain. Note: it is not necessary to re-format pre-existing\n"
-#~ "partitions, particularly if they contain files or data you wish to keep.\n"
-#~ "Typically retained are /home and /usr/local."
-#~ msgstr ""
-#~ "Kőik Teie poolt värskelt loodud partitsioonid tuleb kasutamiseks "
-#~ "vormindada\n"
-#~ "(luua failisüsteemid). Partitsiooni vormindamisel hävitatakse kőik "
-#~ "andmed,\n"
-#~ "mis seal iganes leiduvad. Pange tähele, et varem vormindatud ja "
-#~ "vajalikke\n"
-#~ "andmeid sisaldavaid partitsioone, tüüpiliselt /home ja /usr/local, ei "
-#~ "ole\n"
-#~ "mőistlik üle vormindada, vaid need vőib jätta nii nagu on."
-
-#~ msgid ""
-#~ "The packages selected are now being installed. This operation\n"
-#~ "should take a few minutes unless you have chosen to upgrade an\n"
-#~ "existing system, in that case it can take more time even before\n"
-#~ "upgrade starts."
-#~ msgstr ""
-#~ "Nüüd hakkan Teie valitud pakette installima. Selleks peaks kuluma\n"
-#~ "mőnikümmend minutit. Süsteemi uuendamisel kulub aega küll veidi rohkem,\n"
-#~ "sest siis tuleb enne olemasolevaid pakette analüüsida."
-
-#~ msgid ""
-#~ "If DrakX failed to find your mouse, or if you want to\n"
-#~ "check what it has done, you will be presented the list of mice\n"
-#~ "above.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you agree with DrakX's settings, just click 'Ok'.\n"
-#~ "Otherwise you may choose the mouse that more closely matches your own\n"
-#~ "from the menu above.\n"
-#~ "\n"
-#~ "\n"
-#~ "In case of a serial mouse, you will also have to tell DrakX\n"
-#~ "which serial port it is connected to."
-#~ msgstr ""
-#~ "Kui DrakX ei suutnud Teie hiirt tuvastada, vői soovite vaadata, mida\n"
-#~ "leiti, kuvatakse Teile ülalpool \"hiiretőugude\" nimekiri.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete valikuga nőus, minge lihtsalt vasakpoolses menüüs edasi.\n"
-#~ "Vastasel juhul valige hiire tüüp, mis Teie arvates kőige paremini Teie\n"
-#~ "hiirt iseloomustab\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui tegemist on seerialpordi hiirega, peate ütlema ka, mis porti ta on\n"
-#~ "ühendatud."
-
-#~ msgid ""
-#~ "This section is dedicated to configuring a local area\n"
-#~ "network (LAN) or a modem.\n"
-#~ "\n"
-#~ "Choose \"Local LAN\" and DrakX will\n"
-#~ "try to find an Ethernet adapter on your machine. PCI adapters\n"
-#~ "should be found and initialized automatically.\n"
-#~ "However, if your peripheral is ISA, autodetection will not work,\n"
-#~ "and you will have to choose a driver from the list that will appear "
-#~ "then.\n"
-#~ "\n"
-#~ "\n"
-#~ "As for SCSI adapters, you can let the driver probe for the adapter\n"
-#~ "in the first time, otherwise you will have to specify the options\n"
-#~ "to the driver that you will have fetched from documentation of your\n"
-#~ "hardware.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you install a Mandrake Linux system on a machine which is part\n"
-#~ "of an already existing network, the network administrator will\n"
-#~ "have given you all necessary information (IP address, network\n"
-#~ "submask or netmask for short, and hostname). If you're setting\n"
-#~ "up a private network at home for example, you should choose\n"
-#~ "addresses.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Dialup with modem\" and the Internet connection with\n"
-#~ "a modem will be configured. DrakX will try to find your modem,\n"
-#~ "if it fails you will have to select the right serial port where\n"
-#~ "your modem is connected to."
-#~ msgstr ""
-#~ "See sektsioon on pühendatud kohtvőrgu (LAN) vői sissehelistamisteenuse\n"
-#~ "(DialUp) sätete paikapanemisele.\n"
-#~ "\n"
-#~ "Kui vastate \"LAN\", siis proovitakse Teie arvutist leida vőrgukaarti.\n"
-#~ "Kui Teie vőrgukaart töötab PCI siinil, peaks ta olema leitav ja "
-#~ "kasutatav\n"
-#~ "automaatselt. ISA kaardi puhul, vőib automaatne otsing alt vedada ja Te\n"
-#~ "peate juhtprogrammi ise nimekirjast valima.\n"
-#~ "\n"
-#~ "\n"
-#~ "SCSI kaartide puhul peab juhtprogramm esmalt leidma SCSI liidese, "
-#~ "vastasel\n"
-#~ "juhul peate pöörduma kaardi müüja poole.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui installite Mandrake Linux süsteemi masinale, mis on osake juba "
-#~ "töötavast\n"
-#~ "kohtvőrgust, annab vőrgu haldaja Teile kogu vajaliku informatsiooni (IP-\n"
-#~ "aadressi, alamvőrgu maski ja masina nime). Kui seate üles oma privaatset\n"
-#~ "vőrku, peaksite ise valima aadressid \n"
-#~ "\n"
-#~ "Kui soovite Internetti kasutada modemi ja sissehelistamisteenuse kaudu,\n"
-#~ "valige \"DialUp\" ja DrakX proovib otsida Teie arvutist modemit. Kui\n"
-#~ "modemit ei leita, peate sisestama seerialpordi, kuhu kavatsete modemi\n"
-#~ "ühendada."
-
-#~ msgid ""
-#~ "GNU/Linux can deal with many types of printer. Each of these\n"
-#~ "types require a different setup. Note however that the print\n"
-#~ "spooler uses 'lp' as the default printer name; so you\n"
-#~ "must have one printer with such a name; but you can give\n"
-#~ "several names, separated by '|' characters, to a printer.\n"
-#~ "So, if you prefer to have a more meaningful name you just have\n"
-#~ "to put it first, eg: \"My Printer|lp\".\n"
-#~ "The printer having \"lp\" in its name(s) will be the default printer.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your printer is physically connected to your computer, select\n"
-#~ "\"Local printer\". You will then have to tell which port your\n"
-#~ "printer is connected to, and select the appropriate filter.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a printer located on a remote Unix machine,\n"
-#~ "you will have to select \"Remote lpd\". In order to make\n"
-#~ "it work, no username or password is required, but you will need\n"
-#~ "to know the name of the printing queue on this server.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you want to access a SMB printer (which means, a printer located\n"
-#~ "on a remote Windows 9x/NT machine), you will have to specify its\n"
-#~ "SMB name (which is not its TCP/IP name), and possibly its IP address,\n"
-#~ "plus the username, workgroup and password required in order to\n"
-#~ "access the printer, and of course the name of the printer. The same goes\n"
-#~ "for a NetWare printer, except that you need no workgroup information."
-#~ msgstr ""
-#~ "Linuxi all saate kasutada mitmesuguseid printereid. Igaüks neist nőuab\n"
-#~ "erinevaid sätteid töötamiseks. Siiski tasub tähele panna, et süsteem\n"
-#~ "kasutab nime 'lp' vaikimisi printeri jaoks; seega peab Teil üks \n"
-#~ "selliselt tähistatud, kuigi printeri(te)le vőib panna '|' märgiga "
-#~ "eraldatult\n"
-#~ "mitu nime. Kui eelistate \"tähendusega\" nimesid, pange nimeks\n"
-#~ "näiteks \"Minu printer|lp\" ja see saab olema Teie vaikimisi printer.\n"
-#~ "\n"
-#~ "Kui Teie printer on otse arvuti külge ühendatud, valige \"Kohalik printer"
-#~ "\".\n"
-#~ "Siis saate valida pordi kuhu see on ühendatud ja printerile vastava "
-#~ "filtri.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada printerit, mis on ühendatud Un*x serveriga, peate\n"
-#~ "Valima \"lpd vőrguprinter\". Niisugusel juhul ei vaja Te kasutajatunnust\n"
-#~ "ega salasőna, vaid ainult serveri nime ja printimisjärje nime serveril.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui soovite kasutada SMB printserverit (st. printerit, mida jagab välja\n"
-#~ "Windows 9x/NT, peate ära näitama serveri SMB nime (mis ei pea olema sama\n"
-#~ "TCP/IP nimega) ja kindluse mőttes ka IP-aadressi. Loomulikult on vaja "
-#~ "teada\n"
-#~ "ka serveri poolt jagatava printeri nime ning kasutajatunnust, salasőna "
-#~ "ja\n"
-#~ "töögrupi nime. Sama, välja arvatud töögrupp, on vaja teada ka NetWare\n"
-#~ "printserveri kasutamise korral."
-
-#~ msgid ""
-#~ "It is strongly recommended that you answer \"Yes\" here. If you install\n"
-#~ "Microsoft Windows at a later date it will overwrite the boot sector.\n"
-#~ "Unless you have made a bootdisk as suggested, you will not be able to\n"
-#~ "boot into GNU/Linux any more."
-#~ msgstr ""
-#~ "On äärmiselt soovitatav vastata siin \"Jah\"! Näiteks, kui installite\n"
-#~ "samasse masinasse hiljem MS Windowsi, kirjutab see üle bootsektori.\n"
-#~ "Ilma alglaadimisflopita ei ole Teil siis enam vőimalik GNU/Linuxit\n"
-#~ "laadida."
-
-#~ msgid "Move your wheel!"
-#~ msgstr "Liigutage ratast!"
-
-#~ msgid "Forget the changes?"
-#~ msgstr "Muutusi ei teinudki?"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Mis tüüpi hiirt kasutate?"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Väljapakutavad kuvatihedused"
-
-#~ msgid ""
-#~ "To find the available resolutions I will try different ones.\n"
-#~ "Your screen will blink...\n"
-#~ "You can switch if off if you want, you'll hear a beep when it's over"
-#~ msgstr ""
-#~ "Et leida vőimalikke kuvatihedusi, testin erinevaid variante.\n"
-#~ "Ekraan Teie ees hakkab vilkuma...\n"
-#~ "Kui soovite, lülitage monitor välja. Kui valmis saan, kostab piiks"
-
-#~ msgid ""
-#~ "I can try to find the available resolutions (eg: 800x600).\n"
-#~ "Sometimes, though, it may hang the machine.\n"
-#~ "Do you want to try?"
-#~ msgstr ""
-#~ "Me vőime proovida leida kuvatihedust, näiteks 800x600.\n"
-#~ "Siiski, vahel ajab see arvuti segadusse.\n"
-#~ "Soovite proovida?"
-
-#~ msgid ""
-#~ "No valid modes found\n"
-#~ "Try with another video card or monitor"
-#~ msgstr ""
-#~ "Sobivat olekut ei leitud\n"
-#~ "Proovige palun muud graafikakaarti vői monitori"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Automaatne kuvatiheduste otsing"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Apple ADB hiir"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Apple ADB hiir (2 nuppu)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Apple ADB hiir (3+ nuppu)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Apple USB hiir"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Apple USB hiir (2 nuppu)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Apple USB hiir (3+ nuppu)"
-
-#~ msgid "ASCII MieMouse"
-#~ msgstr "ASCII MieMouse"
-
-#~ msgid "Genius NetMouse Pro"
-#~ msgstr "Genius NetMouse Pro"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "ATI Bus hiir"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Microsoft Bus hiir"
-
-#~ msgid "Logitech Bus Mouse"
-#~ msgstr "Logitech Bus hiir"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "USB hiir (3 vői enam nuppu)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A vői kőrgem (seerial)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (seerial)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (seerial)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (seerial)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Lihtsalt hiir (seerial)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsofti ühilduv (seerial)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Lihtsalt 3-nupuline hiir (seerial)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (seerial)"
-
-#~ msgid ""
-#~ "I need to configure your network adapter to be able to connect to "
-#~ "internet."
-#~ msgstr "Internetiühenduse jaoks on vaja seadistada vőrguliides."
-
-#~ msgid ""
-#~ "Please choose which network adapter do you want to use to connect to "
-#~ "internet.\n"
-#~ "If you don't know, choose eth0.\n"
-#~ msgstr ""
-#~ "Palun valige millist vőrguliidest soovite kasutada kohtvőrgu\n"
-#~ "jaoks.\n"
-#~ "Kui Te ei tea, valige eth0.\n"
-
-#~ msgid "nfs mount failed"
-#~ msgstr "NFS ühendamine ebaőnnestus"
-
-#~ msgid "Socket"
-#~ msgstr "Pistik"
-
-#~ msgid ""
-#~ "DrakX will generate config files for both XFree 3.3 and XFree 4.0.\n"
-#~ "By default, the 4.0 server is used unless your card is not supported.\n"
-#~ "\n"
-#~ "Do you want to keep XFree 3.3?"
-#~ msgstr ""
-#~ "DrakX saab luua sättefailid nii XFree 3.3 kui ka XFree 4.0. \n"
-#~ "Vaikimisi kasutatakse 4.0, kui see toetab Teie riistvara\n"
-#~ "\n"
-#~ "Kas soovite jääda XFree versiooni 3.3 juurde?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Krüpto"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Seadista X"
-
-#~ msgid "Do not set up networking"
-#~ msgstr "Ei seadista vőrku"
-
-#~ msgid "Do you want to configure a local network for your system?"
-#~ msgstr "Kas soovite kasutada kohtvőrku?"
-
-#~ msgid "Show less"
-#~ msgstr "Näita vähem"
-
-#~ msgid "Show more"
-#~ msgstr "Näita rohkem"
-
-#~ msgid "Take over the hard drive"
-#~ msgstr "Kasuta kogu ketast"
-
-#~ msgid "URI for Local printer"
-#~ msgstr "Kohalik printer"
-
-#~ msgid "URI for Network printer"
-#~ msgstr "Vőrguliides"
-
-#~ msgid "Local Printer Device (URI)"
-#~ msgstr "Otse ühendatud printer"
-
-#~ msgid ""
-#~ "What URI device is your printer connected to\n"
-#~ "(nte that parallel:/dev/lp0 is equivalent to LPT1:)?"
-#~ msgstr ""
-#~ "Mis porti on Teie printer ühendatud? \n"
-#~ "(paneme tähele, et /dev/lp0 on sama mis LPT1:)?"
-
-#~ msgid "tie"
-#~ msgstr "pintsaklips"
-
-#~ msgid "brunette"
-#~ msgstr "brünett"
-
-#~ msgid "girl"
-#~ msgstr "neiu"
-
-#~ msgid "woman-blond"
-#~ msgstr "blondiin"
-
-#~ msgid "automagic"
-#~ msgstr "automaagiline"
-
-#~ msgid "Have you been provided with a hostname?"
-#~ msgstr "Anti Teile masinanimi"
-
-#~ msgid "Local Area Network specification"
-#~ msgstr "Kohtvőrgu seaded"
-
-#~ msgid "You may now decide which class C network to use.\n"
-#~ msgstr "Millist C-klassi vőrku soovite kasutada.\n"
-
-#~ msgid "Internet Connection Sharing - setup of %s"
-#~ msgstr "Internetiühenduse jagamine - liides %s"
-
-#~ msgid ""
-#~ "The following interface is about to be configured:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Seatakse sätted järgmisele vőrguliidesele:\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-
-#
-#~ msgid "Everything configured!"
-#~ msgstr "Kőik seadistatud!"
-
-#~ msgid "What is your keyboard layout?"
-#~ msgstr "Milline on Teie klaviatuuriasetus"
-
-#~ msgid ""
-#~ "\n"
-#~ "I recommend that you abort, and then launch this internet wizard after "
-#~ "installation.It will then be able to setup ISA or PCMCIA cards easier.\n"
-#~ "\n"
-#~ "But, if you know the irq, dma, io of your card, you can still configure "
-#~ "your card."
-#~ msgstr ""
-#~ "\n"
-#~ "Soovitan teil praegu katkestada ja käivitada vőrguühenduse abimees pärast "
-#~ "installimist uuesti. Siis on vőimalik Teie ISA vői PCMCIA kaarte lihtsam\n"
-#~ "seadistada\n"
-#~ "Muidugi, kui teil on teada oma kaardi IRQ, DMA ja IO, ei ole probleemi."
-
-#~ msgid "pptp alcatel"
-#~ msgstr "Paiguta ise"
-
-#~ msgid "Try to find PCMCIA cards?"
-#~ msgstr "Kas otsida PCMCIA kaarte?"
-
-#~ msgid "Try to find %s devices?"
-#~ msgstr "Kas otsida %s seadmeid?"
-
-#~ msgid "Small(%dMB)"
-#~ msgstr "Väike (%d MB)"
-
-#~ msgid ""
-#~ "Do you want to configure a dialup connection with modem for your system?"
-#~ msgstr "Kas soovite kasutada DialUp ühendust modemi kaudu?"
-
-#~ msgid "Do you want to configure a ISDN connection for your system?"
-#~ msgstr "Kas soovite kasutada ISDN ühendust?"
-
-#~ msgid "Try to find PCI devices?"
-#~ msgstr "Kas otsida PCI seadmeid?"
-
-#~ msgid "Searching root partition."
-#~ msgstr "Otsin juurpartitsiooni.."
-
-#~ msgid "%s: This is not a root partition, please select another one."
-#~ msgstr "%s: See ei ole juurpartitsioon, palun valige mőni muu."
-
-#~ msgid "Please choose a partition to use as your root partition."
-#~ msgstr "Millist partitsiooni soovite kasutada juurkataloogi jaoks?"
-
-#~ msgid "Autologin at startup"
-#~ msgstr "X stardib nüüd"
-
-#~ msgid "Autologin - Choose default user"
-#~ msgstr "Valige uus suurus"
-
-#~ msgid "You don't have any windows partitions!"
-#~ msgstr "Teil ei ole ühtki Windowsi partitsiooni!"
-
-#~ msgid "You don't have any enough room for Lnx4win"
-#~ msgstr "Teil ei ole piisavalt ruumi Lnx4win jaoks"
-
-#~ msgid ", %U MB"
-#~ msgstr ", %U MB"
-
-# NOTE: this message will be displayed by lilo at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-#~ msgid ""
-#~ "Welcome to LILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or wait %d seconds "
-#~ "for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Tere tulemast! Laadimisel aitab Teid LILO!\n"
-#~ "\n"
-#~ "Valikud kuvab <Tab>.\n"
-#~ "\n"
-#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
-#~ "vaikimisi oodake %d sekundit.\n"
-
-# NOTE: this message will be displayed by SILO at boot time; that is
-# only the ascii charset will be available
-# so use only 7bit for this message
-#
-#~ msgid ""
-#~ "Welcome to SILO the operating system chooser!\n"
-#~ "\n"
-#~ "To list the possible choices, press <TAB>.\n"
-#~ "\n"
-#~ "To load one of them, write its name and press <ENTER> or\n"
-#~ "wait %d seconds for default boot.\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Tere tulemast! Laadimisel aitab Teid SILO!\n"
-#~ "\n"
-#~ "Valikud kuvab <Tab>.\n"
-#~ "\n"
-#~ "Valimiseks sisestage eelistatava nimi ja vajutage <Enter>\n"
-#~ "vaikimisi oodake %d sekundit.\n"
-
-#~ msgid "SILO main options"
-#~ msgstr "SILO peasätted"
-
-#~ msgid ""
-#~ "Here are the following entries in SILO.\n"
-#~ "You can add some more or change the existing ones."
-#~ msgstr ""
-#~ "Praegu on SILO jaoks kirjeldatud alltoodud kirjed.\n"
-#~ "Te vőite neid lisada ning olemasolevaid muuta."
-
-#~ msgid "This label is already in use"
-#~ msgstr "Selline tähis on juba kasutusel"
-
-#~ msgid "Installation of SILO failed. The following error occured:"
-#~ msgstr "SILO installimine ebaőnnestus. Tekkis järgnev viga:"
-
-#~ msgid ""
-#~ "DrakX will attempt at first to look for one or more PCI\n"
-#~ "SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n"
-#~ "to use, it will insert it (them) automatically.\n"
-#~ "\n"
-#~ "\n"
-#~ "If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n"
-#~ "doesn't know which driver to use for this card, or if you have no\n"
-#~ "SCSI adapters at all, you will then be prompted on whether you have\n"
-#~ "one or not. If you have none, answer \"No\". If you have one or more,\n"
-#~ "answer \"Yes\". A list of drivers will then pop up, from which you\n"
-#~ "will have to select one.\n"
-#~ "\n"
-#~ "\n"
-#~ "After you have selected the driver, DrakX will ask if you\n"
-#~ "want to specify options for it. First, try and let the driver\n"
-#~ "probe for the hardware: it usually works fine.\n"
-#~ "\n"
-#~ "\n"
-#~ "If not, do not forget the information on your hardware that you\n"
-#~ "could get from your documentation or from Windows (if you have it\n"
-#~ "on your system), as suggested by the installation guide. These\n"
-#~ "are the options you will need to provide to the driver."
-#~ msgstr ""
-#~ "DrakX proovib esmalt leida Teie süsteemist SCSI liideseid PCI siinil.\n"
-#~ "Kui neid leitakse, ja vastav juhtprogramm on teada, siis laetakse\n"
-#~ "see mällu automaatselt.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Teie SCSI liides kasutab ISA siini vői kui DrakX ei tea,\n"
-#~ "millist juhtprogrammi kasutada vői Teil ei ole üldse SCSI liidest,\n"
-#~ "siis küsitakse Teilt selle kohta.\n"
-#~ "Kui Teil SCSI liidest tőesti ei ole, vastake \"Ei\". Kui Teil aga siiski\n"
-#~ "on, siis vastake \"Jah\". Seejärel lastakse Teil nimekirjast sobiv\n"
-#~ "juhtprogramm valida.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete juhtprogrammi välja valinud, on Teil vőimalus anda sellele\n"
-#~ "ka parameetreid. Siiski, enamasti läheb kőik kenasti ka ilma neid\n"
-#~ "sisestamata: vastavad andmed leiab juhtprogramm ise.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui automaatne parameetrite otsimine ei tööta, pöörduge palun\n"
-#~ "oma SCSI liidese dokumentatsiooni poole. Ka samas masinas olev Windows\n"
-#~ "oskab vahel SCSI kohta vajalikku informatsiooni anda."
-
-#~ msgid "Shutting down"
-#~ msgstr "Sulgemine"
-
-#~ msgid "useless"
-#~ msgstr "kasutu"
-
-#~ msgid ""
-#~ "Some true type fonts from windows have been found on your computer.\n"
-#~ "Do you want to use them? Be sure you have the right to use them under "
-#~ "Linux."
-#~ msgstr ""
-#~ "Teie arvutist mőned hulk Windowsi TrueType fondid.\n"
-#~ "Soovite Te neid ka Linuxis kasutada (eeldusel, et Teil on need legaalsed)?"
-
-#~ msgid ""
-#~ "Choose \"Install\" if there are no previous versions of Linux\n"
-#~ "installed, or if you wish to use multiple distributions or versions.\n"
-#~ "\n"
-#~ "\n"
-#~ "Choose \"Upgrade\" if you wish to update a previous version of Mandrake "
-#~ "Linux:\n"
-#~ "5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios), Gold "
-#~ "2000\n"
-#~ "or 7.0 (Air)."
-#~ msgstr ""
-#~ "Valige \"Installimine\" kui varem sellele masinale Linuxit ei ole pandud\n"
-#~ "vői soovite kasutada mitut distributsiooni\n"
-#~ "\n"
-#~ "\n"
-#~ "Valige \"Uuendamine\" kui soovite uuendada mőnd eelmist Mandrake "
-#~ "Linuxit:\n"
-#~ "5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen), 6.0 (Venus), 6.1 (Helios),\n"
-#~ "Gold 2000 vői 7.0 (Air)."
-
-#~ msgid "Creating and formatting loopback file %s"
-#~ msgstr "Loon ja vormindan loopback faili %s"
-
-#~ msgid "Do you want to use LILO?"
-#~ msgstr "Soovite LILO-t kasutada?"
-
-#~ msgid ""
-#~ "You may now select the packages you wish to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "First you can select group of package to install or upgrade. After that\n"
-#~ "you can select more packages according to the total size you wish to\n"
-#~ "select.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you are in expert mode, you can select packages individually.\n"
-#~ "Please note that some packages require the installation of others.\n"
-#~ "These are referred to as package dependencies. The packages you select,\n"
-#~ "and the packages they require will be automatically selected for\n"
-#~ "install. It is impossible to install a package without installing all\n"
-#~ "of its dependencies."
-#~ msgstr ""
-#~ "Nüüd vőite valida paketigrupi, mida soovite installida vői uuendada.\n"
-#~ "Soovi korral saate valida pakette ka lisaks vastavalt oma äranägemisele\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui olete valinud paigaldusviisi \"Ekspert\", saate pakette ükshaaval\n"
-#~ "Tähelepanu! Mőned paketid vőivad nőuda, et oleks installitud ka mőned\n"
-#~ "teised. Neid nimetatakse paketi sőltuvusteks. Paketi valimisel valitakse\n"
-#~ "automaatselt ka kőik tema sőltuvused. Paketi installimine ilma kőiki\n"
-#~ "sőltuvusi rahuldamata, on vőimatu."
-
-#~ msgid ""
-#~ "LILO (the LInux LOader) can boot Linux and other operating systems.\n"
-#~ "Normally they are correctly detected during installation. If you don't\n"
-#~ "see yours detected, you can add one or more now.\n"
-#~ "\n"
-#~ "\n"
-#~ "If you don't want that everybody could access at one of them, you can "
-#~ "remove\n"
-#~ "it now (a boot disk will be needed to boot it)."
-#~ msgstr ""
-#~ "LILO (LInux LOader) oskab laadida erinevaid Teie arvuti leiduvaid\n"
-#~ "operatsioonisüsteeme. Tavaliselt tuvastatakse need installimise käigus.\n"
-#~ "Kui Te ei näe neid tuvastatuna, saate need nüüd lisada.\n"
-#~ "\n"
-#~ "\n"
-#~ "Kui Te ei soovi mőnd neist laadida, vőite selle kohe eemaldada. Sellisel\n"
-#~ "juhul vajate selle laadimiseks vastavat alglaadimisflopit."
-
-#~ msgid "Choose other CD to install"
-#~ msgstr "Pakettide valik"
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Recommended: If you have never installed Linux before.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Customized: If you are familiar with Linux, you will be able to \n"
-#~ "select the usage for the installed system between normal, development or\n"
-#~ "server. Choose \"Normal\" for a general purpose installation of your\n"
-#~ "computer. You may choose \"Development\" if you will be using the "
-#~ "computer\n"
-#~ "primarily for software development, or choose \"Server\" if you wish to\n"
-#~ "install a general purpose server (for mail, printing...).\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: If you are fluent with GNU/Linux and want to perform\n"
-#~ "a highly customized installation, this Install Class is for you. You "
-#~ "will\n"
-#~ "be able to select the usage of your installed system as for \"Customized"
-#~ "\"."
-#~ msgstr ""
-#~ "Valige:\n"
-#~ "\n"
-#~ " - Soovitatav: Te pole kunagi varem Linuxit installinud.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Oma segu: Olete Linuxiga tuttav ja soovite süsteemi kohandada "
-#~ "vastavalt\n"
-#~ "Teie vajadustele. Järgmisena saate teha valikud \"Tööjaam\", \"Arendus\"\n"
-#~ "ja \"Server\", sőltuvalt Teie arvuti edaspidisest kasutusalast.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Ekspert: Te tunnete end GNU/Linux keskkonnas vabalt ja soovite\n"
-#~ "süsteemi, mis sobiks nagu valatult Teie täpsete ootustege."
-
-#~ msgid "Downloading cryptographic packages"
-#~ msgstr "Laadime krüptopakette"
-
-#~ msgid "Setup SCSI"
-#~ msgstr "SCSI seadistamine"
-
-#~ msgid "Local LAN"
-#~ msgstr "LAN"
-
-#~ msgid "developer"
-#~ msgstr "arendaja"
-
-#~ msgid "beginner"
-#~ msgstr "algaja"
-
-#~ msgid "Linear (needed for some SCSI drives)"
-#~ msgstr "lineaarne (vajalik mőnedel SCSI ketastel)"
-
-#~ msgid "linear"
-#~ msgstr "linearne"
-
-#~ msgid "After %s partition %s,"
-#~ msgstr "Pärast %s partitsioneeri %s,"
-
-#~ msgid "changing type of"
-#~ msgstr "tüübi muutmine"
-
-#~ msgid "resizing"
-#~ msgstr "suuruse muutumine"
-
-#~ msgid "Size: %s MB"
-#~ msgstr "Suurus: %s MB"
-
-#~ msgid "Bad kickstart file %s (failed %s)"
-#~ msgstr "Loetamatu kickstart fail %s (%s viga)"
-
-#~ msgid "Too many packages chosen: %dMB doesn't fit in %dMB"
-#~ msgstr "Valitud on liiga palju pakette: %dMB ei mahu %dMB-le"
-
-#~ msgid "Going to install %d MB. You can choose to install more programs"
-#~ msgstr "Paigalduseks valitud %d MB. Vőite veel programme juurde valida"
-
-#~ msgid "Enter a floppy (all data will be lost)"
-#~ msgstr "Pange tühi flopi masinasse (andmed sellel hävivad)"
-
-#~ msgid "Password:"
-#~ msgstr "Salasőna:"
-
-#~ msgid "User name:"
-#~ msgstr "Kasutajatunnus:"
-
-#~ msgid ""
-#~ "Failed to create an HTP boot floppy.\n"
-#~ "You may have to restart installation and give ``%s'' at the prompt"
-#~ msgstr ""
-#~ "HTP alglaadimisketta loomine ebaőnnestus.\n"
-#~ "Taasalustage installimist, andes parameetriks ``%s''"
-
-#~ msgid "It is necessary to restart installation with the new parameters"
-#~ msgstr "Peate taasalustama installimist uute parameetritega"
-
-#~ msgid "It is necessary to restart installation booting on the floppy"
-#~ msgstr "Peate taasalustama installimist, laadides flopikettalt"
-
-#~ msgid ""
-#~ "Enter a floppy to create an HTP enabled boot\n"
-#~ "(all data on floppy will be lost)"
-#~ msgstr ""
-#~ "Sisesta flopi HTP alglaadimisketta loomiseks\n"
-#~ "(kőik andmed flopil hävivad)"
-
-#~ msgid "A entry %s already exists"
-#~ msgstr "Kirje %s on juba olemas"
-
-#~ msgid "Choose install or upgrade"
-#~ msgstr "Paigaldus vői uuendamine"
-
-#~ msgid "What usage do you want?"
-#~ msgstr "Mis kasutusala soovite?"
diff --git a/perl-install/share/po/eu.po b/perl-install/share/po/eu.po
deleted file mode 100644
index 2baf3fd1e..000000000
--- a/perl-install/share/po/eu.po
+++ /dev/null
@@ -1,12369 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Copyright (c) 1999 MandrakeSoft
-# Joseba Bidaurrazaga van Dierdonck <jbv@euskalnet.net>, 1999-2001.
-# Ińigo Salvador Azurmendi <xalba@euskalnet.net>, 2001
-# Elhuyar, 2002
-# Lore Azkarate <lazkarate@uzei.com>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-12-20 11:28+0100\n"
-"Last-Translator: Josu Walińo <josu@elhuyar.com>\n"
-"Language-Team: Euskara <linux-eu@chanae.alphanet.ch>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Buru guztiak independenteki konfiguratu"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Erabili Xinerama hedapena"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Konfiguratu \"%s\" (%s) txartela soilik"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Buru anitzeko konfigurazioa"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Zure sistemak buru anitzeko konfigurazioa onartzen du.\n"
-"Zer egin nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Txartel grafikoa"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Hautatu txartel grafiko bat"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Aukeratu X zerbitzaria"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X zerbitzaria"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Aukeratu X kontrolatzailea"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X kontrolatzailea"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "XFree-ren zein konfigurazio izan nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria eduki dezake, baina "
-"XFree %s(r)ekin soilik.\n"
-"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
-"2Dan."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
-"ekin."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s 3D hardware-azelerazioarekin"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake XFree %s(r)"
-"ekin,\n"
-"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s 3D hardware-azelerazio ESPERIMENTALAREKIN"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Zure txartelak 3D hardware-azelerazioaren euskarria izan dezake, baina XFree "
-"%s(r)ekin soilik,\n"
-"KONTUAN IZAN EUSKARRI ESPERIMENTALA DELA ETA ORDENAGAILUA BLOKEA DEZAKEELA."
-"Zure txartelak XFree %s euskarria du, eta horrek euskarri hobea izan dezake "
-"2Dan."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalazioaren bistaratze-kontrolatzailea)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree konfigurazioa"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Hautatu txartel grafikoaren memoria-tamaina"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Hautatu zerbitzariaren aukerak"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Aukeratu monitorea"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitorea"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Bi parametro kritikoak freskatze-maiztasun bertikala eta sinkronizazio-"
-"maiztasun\n"
-"horizontala dira. Lehenengoak pantaila osoa freskatzeko maiztasuna \n"
-"zehazten du eta bigarrenak, eskaneatze-lerroak bistaratzekoa.\n"
-"\n"
-"OSO GARRANTZITSUA da zure monitoreak onar dezakeena baino sinkronizazio-"
-"balio \n"
-" handiagoko monitorerik ez zehaztea: monitorea honda dezakezu.\n"
-" Zalantzarik baduzu, aukeratu ezarpen kontserbadore bat."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Freskatze-maiztasun horizontala"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Freskatze-maiztasun bertikala"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Monitorea konfiguratu gabe"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Txartel grafikoa oraindik konfiguratu gabe"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Bereizmenak oraindik aukeratu gabe"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Konfigurazioa probatu nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Kontuz: txartel grafiko hau probatzean ordenagailua blokea daiteke"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Konfigurazioaren proba"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"saiatu parametro batzuk aldatzen"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Errorea gertatu da:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d segundo barru irtengo da"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ezarpen hau zuzena da?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Errorea gertatu da, saiatu parametro batzuk aldatzen"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Bereizmena"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Aukeratu bereizmena eta kolorearen sakonera"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Txartel grafikoa: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 zerbitzaria: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Gehiago"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ados"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Aditu modua"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Erakutsi dena"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Bereizmenak"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Teklatu-diseinua: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Sagu-mota: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Sagu-gailua: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitorea: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorearen SinkHoriz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorearen FreskBert: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Txartel grafikoa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Txartel grafikoaren identifikazioa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria grafikoa: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorearen sakonera: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Bereizmena: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 zerbitzaria: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 kontrolatzailea: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "X-Window konfigurazioa prestatzen"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Zer egin nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Aldatu monitorea"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Aldatu txartel grafikoa"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Aldatu zerbitzariaren aukerak"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Aldatu bereizmena"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Erakutsi informazioa"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Probatu berriro"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Irten"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Aldaketak mantendu?\n"
-"Hau da uneko konfigurazioa:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X abioan"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Ordenagailua abiatzean X automatikoki abiarazteko konfigura dezaket.\n"
-"Berrabiaraztean X hastea nahi duzu?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Hasi berriro saioa %s(e)n aldaketak aktibatzeko"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Amaitu saioa eta, ondoren, sakatu Ktrl-Alt-Atzera"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 kolore (8 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mila kolore (15 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mila kolore (16 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milioi kolore (24 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 mila milioi kolore (32 bit)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB edo gehiago"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estandarra 640x480 - 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 - 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 bateragarria, 1024x768 - 87 Hz gurutzelarkatua (ez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 - 87 Hz gurutzelarkatua, 800x600 - 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA hedatua, 800x600 - 60 Hz, 640x480 - 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Gurutzelarkatu gabeko SVGA, 1024x768 - 60 Hz, 800x600 - 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Frekuentzia altuko SVGA, 1024x768 - 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "1280x1024 - 60 Hz egin dezakeen multifrekuentzia"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "1280x1024 - 74 Hz egin dezakeen multifrekuentzia"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "1280x1024 - 76 Hz egin dezakeen multifrekuentzia"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "1600x1200 - 70 Hz egin dezakeen monitorea"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "1600x1200 - 76 Hz egin dezakeen monitorea"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Arrankeko partizioaren lehen sektorea"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Unitateko lehen sektorea (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalazioa"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Non instalatu nahi duzu abioko kargatzailea?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalazioa"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO testu-menuarekin"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO menu grafikoarekin"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "DOS/Windows-etik abiarazi (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Abioko kargatzailearen aukera nagusiak"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Erabili beharreko abioko kargatzailea"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Abioko kargatzailearen instalazioa"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Abioko gailua"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ez du funtzionatzen BIOS zaharretan)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Trinkoa"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "trinkotu"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Bideo modua"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Imajina lehenetsia abiarazi arteko atzerapena"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Pasahitza"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Pasahitza (berriro)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Murriztu komando-lerroko aukerak"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "murriztu"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Garbitu /tmp abiatzen den bakoitzean"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Zehaztu RAM tamaina beharrezkoa bada (%d MB aurkituak)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Gaitu profil anitzak"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Eman ram-tamaina MBtan"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``Murriztu komando-lerroko aukerak'' aukera ezin da erabili pasahitzik gabe"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Saiatu berriro"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Pasahitzak ez datoz bat"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Hasierako mezua"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Open Firmware-ren atzerapena"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Nukleoaren abioaren denbora-muga"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Gaitu CDtik abiaraztea?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Gaitu OF abiaraztea?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "SE lehenetsia?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Partizio batean abioko kargatzailea instalatzea erabaki duzu.\n"
-"Horrek esan nahi du baduzula abioko kargatzaile bat abioko unitatean (adib.: "
-"System Commander).\n"
-"\n"
-"Zein da zure abioko unitatea?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Hauek dira sarrerak.\n"
-"Beste batzuk gehi ditzakezu edo lehendik daudenak aldatu."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Gehitu"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Eginda"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Aldatu"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Zer sarrera-mota gehitu nahi duzu?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Beste SE bat (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Beste SE bat (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Beste SE bat (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imajina"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Erantsi"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Irakurri/idatzi"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taula"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Ez-segurua"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiketa"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Lehenetsia"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-tamaina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "BideorikEz"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Kendu sarrera"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Ez da etiketa hutsik onartzen"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Nukleo-imajina bat zehaztu behar duzu"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Erroko partizio bat zehaztu behar duzu"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Etiketa hau jadanik erabili da"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s interfaze aurkitu dira"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Baduzu besterik?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ba duzu %s interfazerik?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ez"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Bai"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Ikus hardwarearen informazioa"
-
-# #this syntax doesn't work yet in perl :-(
-# #msgid "Installing driver for %s card %s"
-# #msgstr "%2$s %1$s txartelaren kontrolatzailea instalatzen"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s %s txartelaren kontrolatzailea instalatzen"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(%s modulua)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Zein %s kontrolatzaile probatu behar dut?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Kasu batzuetan, %s kontrolatzaileak informazio gehigarria behar du egoki \n"
-"funtzionatzeko, nahiz eta normalki hori gabe ongi funtzionatzen duen. Aukera "
-"gehigarriak zehaztu \n"
-"nahi dituzu, edo kontrolatzaileari zure makina probatzen\n"
-"utzi, behar duen informazioa bilatzeko? Batzuetan, probatzeak ordenagailua "
-"blokeatuko du, baina\n"
-"horrek ez luke kalterik egin beharko."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autoproba"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Zehaztu aukerak"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Orain %s moduluari bere aukerak eman dizkiozu.\n"
-"Ohartu helbiderean aurretik 0x aurrizkia jarri behar dela, adlib. '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Orain %s moduluari bere aukerak eman diezazkiokezu.\n"
-"Aukerak ``izena=balioa izena2=balioa2 ...'' formatuan daude.\n"
-"Adibidez, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Modulu-aukerak:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Huts egin du %s modulua kargatzean.\n"
-"Beste parametro batzuekin saiatu nahi duzu berriro?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "X programen atzipena"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "rpm tresnen atzipena"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "onartu \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "administrazio-fitxategien atzipena"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s jadanik gehituta)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Pasahitz hau sinpleegia da"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Eman erabiltzaile-izen bat"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Erabiltzaile-izenak minuskulaz idatzitako letrak, zenbakiak, `-' eta `_' "
-"soilik izan ditzake"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Erabiltzaile-izen hau gehituta dago jadanik"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Gehitu erabiltzailea"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Sartu erabiltzaile bat\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Onartu erabiltzailea"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Benetako izena"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Erabiltzaile-izena"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikonoa"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatikoki hasi saioa"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Ordenagailua konfigura dezaket automatikoki erabiltzaile bat sartzeko.\n"
-"Eginbide hau erabili nahi duzu?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Aukeratu erabiltzaile lehenetsia:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Aukeratu exekutatu beharreko leiho-kudeatzailea:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Aukeratu erabiltzeko hizkuntza bat."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Instalatu ondoren erabilgarri egongo diren beste hizkuntza batzuk aukera "
-"ditzakezu"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Denak"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Eman baimena erabiltzaile guztiei"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Pertsonalizatua"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ez konpartitu"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "%s paketea instalatu egin behar da. Instalatu nahi duzu?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "NFS edo Samba erabiliz esporta dezakezu. Zein nahi duzu"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Derrigorrezko %s paketea falta da"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Utzi"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Abiarazi userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Erabiltzaileen araberako konpartitzeak \"fileshare\". \n"
-"taldea erabiltzen du. Userdrake erabil dezakezu talde \n"
-"honetan erabiltzeak gehitzeko."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Ongi etorri Crackers-era"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Txikia"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estandarra"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Handia"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Handiagoa"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidea"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Maila hau kontuz erabili behar da. Sistema erabilerrazagoa izango da, baina\n"
-"oso erraz erasotzekoa: ez da erabili behar beste ordenagailu batzuekin edo \n"
-"Internetekin konektatuta dauden makinetan. Ez dago pasahitzik."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasahitzak gaituta daude orain, baina sareko ordenagailu gisa erabiltzea ez "
-"da komeni oraindik."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Hau da Internetera bezero gisa konektatzeko erabiliko diren "
-"ordenagailuentzat gomendatzen den segurtasun estandarra. "
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Murriztapen batzuk daude, eta egiaztapen automatiko gehiago gauero egiten "
-"dira."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Segurtasun-maila honekin, sistema hau erabil liteke zerbitzari gisa.\n"
-"Segurtasun hau nahikoa da sistema bezero askoren konexioak onartzen dituen \n"
-"zerbitzari gisa erabili ahal izateko. Oharra: zure makina Interneteko bezero "
-"soila bada, hobe duzu maila apalagoa."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Aurreko mailan oinarritua, baina sistema erabat itxita dago.\n"
-"Segurtasun-eginbideak maximoan jarrita daude."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Aukeratu segurtasun-maila"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Segurtasun-maila"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Erabili libsafe zerbitzarietarako"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Buffer-gainezkatzeen eta formatu-kateen erasoen aurka defendatzen duen "
-"liburutegi bat."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Ongi etorri %s sistema eragilearen aukeratzailera!\n"
-"\n"
-"Aukeratu sistema eragile bat goiko zerrendan edo\n"
-"itxaron %d segundo lehenetsitako abiorako.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Ongi etorri GRUB sistema eragilearen aukeratzailera!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Erabili %c eta %c teklak zein sarrera nabarmenduko den hautatzeko."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sakatu sartu hautatutako SE abiarazteko, 'e' abiarazi aurreko"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komandoak editatzeko, edo 'c' komando-lerroa nahi baduzu."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Nabarmendutako sarrera automatikoki abiaraziko da %d segundotan."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "ez dago nahiko leku /boot-en"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Mahaigaina"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Hasi menua"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Abioko kargatzailea ezin da %s partizio batean instalatu\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "oraindik ez da laguntzarik inplementatu.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Abioko estilo-konfigurazioa"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fitxategia"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fitxategia/I_rten"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "NewStyle kategorizatze-monitorea"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NewStyle monitorea"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Monitore tradizionala"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Gtk+ monitore tradizionala"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Abiarazi Aurora abioan"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modua"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot modua"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Orain %s erabiltzen ari zara Abioko Kudeatzaile gisa.\n"
-"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Konfiguratu"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistema modua"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Abiarazi X-Window sistema hasieran"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ez, ez dut saioa automatikoki hasi nahi"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Bai, automatikoki honekin hasi nahi dut (erabiltzailea, mahaigaina)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Ados"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ezin da ireki /etc/inittab irakurtzeko: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutu"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "minutu bat"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundo"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ezin da pantaila-argazkirik egin partizioak egin aurretik"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-"%s(e)n instalazioa egindakoan pantaila-argazkiak erabilgarri egongo dira"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Frantzia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgika"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Txekiar errepublika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Alemania"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grezia"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvegia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Suedia"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Herbehereak"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Estatu Batuak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Egin zure datuen babeskopia lehendabizi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Irakurri arretaz"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot erabiltzeko asmoa baduzu, utzi lekua (2048 sektore nahikoa da)\n"
-"diskoaren hasieran"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Errorea"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Morroia"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Aukeratu ekintza"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"FAT partizio handi bat duzu\n"
-"(normalean MicroSoft Dos/Windows-ek erabilia).\n"
-"Lehendabizi partizio horri tamaina aldatzea gomendatzen dizut\n"
-"(egin klik bertan, gero egin klik \"Aldatu tamaina\"n)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Egin klik partizio batean"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Xehetasunak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Hutsik"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Bestelakoa"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Fitxategi-sistemen motak:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Sortu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Mota"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Erabili ``%s'' horren ordez"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Ezabatu"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Erabili ``Desmuntatu'' lehendabizi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizio-mota aldatu ondoren, partizio honetako datu guztiak galdu egingo "
-"dira"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Aukeratu partizio bat"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Aukeratu beste partizio bat"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Irten"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Aldatu aditu modura"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Aldatu modu normalera"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Desegin"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jarraitu hala ere?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Irten gorde gabe"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Irten partizio-taula idatzi gabe?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "/etc/fstab aldaketak gorde nahi dituzu?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Auto-esleitu"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Garbitu dena"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Disko gogorraren informazioa"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Lehen mailako partizio guztiak erabilita daude"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ezin da partizio gehiago gehitu"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Partizio gehiago edukitzeko, ezabatu horietako bat partizio hedatu bat sortu "
-"ahal izateko"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Gorde partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Leheneratu partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Berreskuratu partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Birkargatu partizio-taula"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Euskarri aldagarrien automuntatzea"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Hautatu fitxategia"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Babeskopiako partizio-taulak ez du tamaina bera\n"
-"Jarraitu hala ere?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Kontuz"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Sartu diskete bat unitatean\n"
-"Disketeko datu guztiak galdu egingo dira"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Partizio-taula berreskuratzen saiatzen"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informazio xehea"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Muntatze-puntua"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Aukerak"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Aldatu tamaina"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Lekuz aldatu"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formateatu"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Muntatu"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Gehitu RAIDi"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Gehitu LVMri"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmuntatu"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Kendu RAIDetik"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Kendu LVMtik"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Aldatu RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Erabili atzera-begiztarako"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Sortu partizio berria"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Hasierako sektorea: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamaina MBtan: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Fitxategi-sistemaren mota: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Muntatze-puntua: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Hobespena: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Atzera-begiztako fitxategia kendu?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Aldatu partizio-mota"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Zein fitxategi-sistema nahi duzu?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "ext2tik ext3ra aldatzen"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Non muntatu nahi duzu %s atzera-begiztako fitxategia?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Non muntatu nahi duzu %s gailua?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ezin da muntatze-puntuaren ezarpena kendu, partizio hau atzera-begiztarako "
-"erabiltzen delako\n"
-"Kendu atzera-begizta lehendabizi"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT fitxategi-sistemaren mugak kalkulatzen"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Tamaina aldatzen"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Partizio honi ezin zaio tamaina aldatu"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Partizio honetako datu guztiek babeskopia eduki beharko lukete"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizioa tamainaz aldatu ondoren, partizioko datu guztiak galdu egingo "
-"dira"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Aukeratu tamaina berria"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Tamaina berria MBtan: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Zein diskotara eraman nahi duzu?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektorea"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Zein sektoretara eraman nahi duzu?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Lekuz aldatzen"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partizioa lekuz aldatzen..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Aukeratu lehendik dagoen RAID bat gehitzeko"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "berria"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Aukeratu lehendik dagoen LVM bat gehitzeko"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM izena?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Partizio hau ezin da atzera-begiztarako erabili"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Atzera-begizta"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Atzera-begiztako fitxategi-izena: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Eman fitxategi-izen bat"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Fitxategi hau beste atzera-begizta batek erabiltzen du, aukeratu beste bat"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Fitxategia badago lehendik ere. Erabili?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Muntatze-aukerak"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Hainbat"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "gailua"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "maila"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "zatiaren tamaina"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Kontuz ibili: eragiketa hau arriskutsua da."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Nolako partizioa?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Ezin dut onartu /boot hain urrun sortzea unitatean (zilindroa > 1024).\n"
-"Edo LILO erabiltzen duzu eta ez du funtzionatuko, edo ez duzu LILO "
-"erabiltzen eta ez duzu /boot erabili beharrik"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Erro gisa gehitzeko hautatu duzun partizioa (/) fisikoki disko gogorraren\n"
-"1024. zilindroaz haratago dago, eta ez duzu /boot partiziorik.\n"
-"LILO abioko kudeatzailea erabiltzeko asmoa baduzu, ez ahaztu /boot partizioa "
-"gehitzea"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Softwareko RAID partizio bat hautatu duzu erro gisa (/).\n"
-"Ez dago abioko kargatzailerik hori /boot partiziorik gabe erabil "
-"dezakeenik.\n"
-"Beraz, kontuan izan /boot partizioa gehitu behar duzula"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s unitatearen partizio-taula diskoan idatziko da!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Berrabiarazi egin beharko duzu aldaketek eragina izan dezaten"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s partizioa formateatu ondoren, partizioko datu guztiak galdu egingo dira"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formateatzen"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "%s atzera-begiztako fitxategia formateatzen"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "%s partizioa formateatzen"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Ezkutatu fitxategiak"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Eraman fitxategiak partizio berrira"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-" %s direktorioak baditu datu batzuk\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Fitxategiak partizio berrira eramaten"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s kopiatzen"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s kentzen"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "%s partizioa %s da orain"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Gailua: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS unitate-letra: %s (uste hutsa)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Mota: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Izena: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Hasi: %s sektorea\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamaina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "%d zilindrotik %d zilindrora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formateatua\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Formateatu gabe\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Muntatuta\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Atzera-begiztako fitxategia(k):\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Lehenespenez abiarazteko partizioa\n"
-" (MS-DOS abiorako, ez lilo-rako)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "%s maila\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "%s zatiaren tamaina\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "%s RAID-diskoak\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Atzera-begiztako fitxategi-izena: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Partizio hau kontrolatzailearen \n"
-"partizioa izan daiteke, hobe duzu\n"
-"bere horretan uztea.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bootstrap partizio berezi hau\n"
-"sistemaren abio bikoitza\n"
-"egiteko da.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamaina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s zilindro, %s buru, %s sektore\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "%s LVM-diskoak\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partizio-taularen mota: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr " - bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Aukerak: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Fitxategi-sistema enkriptatzeko gakoa"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Aukeratu fitxategi-sistema enkriptatzeko gakoa"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Enkriptatze-gako hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Enkriptatze-gakoak ez datoz bat"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Enkriptatze-gakoa"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Enkriptatze-gakoa (berriro)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Aldatu mota"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Egin klik euskarri batean"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Bilatu zerbitzarietan"
-
-# #this syntax doesn't work yet in perl :-(
-# #msgid "%s formatting of %s failed"
-# #msgstr "%2$s(r)i %1$s formatua emateak huts egin du"
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s %s(r)i formatua emateak huts egin du"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ez dakit nola formateatu %s %s motan"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "%s partizioa %s direktorioan muntatzeak huts egin du"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck-k huts egin du %d irteera-kodearekin edo %d seinalearekin"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "errorea %s desmuntatzean: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "sinplea"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "/usr-rekin"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "zerbitzaria"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Ezin da JFS erabili 16MB baino gutxiagoko partizioetarako"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Ezin da ReiserFS erabili 32MB baino gutxiagoko partizioetarako"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Muntatzen-puntuek / batez hasi behar dute"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jadanik badago %s muntatze-puntua duen partizio bat\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ezin da LVM bolumen logikoa erabili %s muntatze-punturako"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Direktorio honek erroko fitxategi-sisteman egon behar du"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Egiazko fitxategi-sistema (ext2, reiserfs) behar duzu muntatze-puntu "
-"honetarako\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Ezin da fitxategi-sistema enkriptatua erabili %s muntatze-punturako"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Ez dago nahikoa leku libre auto-esleitzeko"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ez dago zer eginik"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Errorea %s idazteko irekitzean: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Errorea gertatu da - ez da fitxategi-sistema berriak sortzeko gailu "
-"baliozkorik aurkitu. Aztertu zure hardwarea arazo honen arrazoia bilatzeko"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Ez duzu partiziorik!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux erabiltzaile anitzeko sistema da, hau da, erabiltzaile bakoitzak\n"
-"bere hobespenak eta bere fitxategiak eduki ditzake. Gehiago jakiteko\n"
-"``Erabiltzailearen gida'' irakurri. Baina administratzailea den \"root\"-ak\n"
-"ez bezala, hemen gehitutako erabiltzaileek debekatuta izango dute ezer\n"
-"aldatzea euren fitxategiak eta konfigurazioa izan ezik. Zuretzat gutxienez\n"
-"ohiko erabiltzaile bat sortu beharko duzu. Eta kontu horretan hasi beharko\n"
-"zenuke eguneroko saioa. Eguneroko saioa \"root\" gisa hastea oso\n"
-"erabilgarria den arren, oso arriskutsua ere izan daiteke! Hutsegiterik\n"
-"txikienak sistemak gehiago ez funtzionatzea eragin lezake. Ohiko\n"
-"erabiltzaile gisa hutsegite larri bat egiten baduzu, informazioren bat gal\n"
-"dezakezu, baina ez sistema osoa.\n"
-"\n"
-"Lehendabizi, zure benetako izena sartu beharko duzu. Hori ez da\n"
-"derrigorrezkoa noski - berez nahi duzuna sar dezakezu. DrakXk gero zuk\n"
-"laukian sartutako lehen hitza hartu eta \"Erabiltzaile-izena\" delakora\n"
-"eramango du. Hori izango da erabiltzaile jakin horrek sisteman saioa\n"
-"hasteko erabiliko duen izena. Alda dezakezu. Gero pasahitz bat sartu\n"
-"beharko duzu hemen. Erabiltzaile ez-pribilegiatuaren (arruntaren) pasahitza\n"
-"ez da \"root\"-arena bezain funtsezkoa segurtasunaren aldetik, baina ez da\n"
-"horregatik arduragabekeriaz jokatu behar - izan ere, zure fitxategiak\n"
-"baitaude arriskuan.\n"
-"\n"
-"\"Onartu erabiltzailea\"n klik eginez gero, nahi adina gehi ditzakezu.\n"
-"Gehitu erabiltzaile bat zure lagun bakoitzeko: zure aita edo ahizpa,\n"
-"adibidez. Nahi dituzun erabiltzaile guztiak gehitu ondoren, hautatu\n"
-"\"Eginda\".\n"
-"\n"
-"\"Aurreratua\" botoian klik eginez, erabiltzaile horren \"shell\"-a alda\n"
-"dezakezu (bash lehenespenez)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Goiko zerrendan zure disko gogorrean detektatutako Linux partizioak daude.\n"
-"Morroiak egindako aukerak manten ditzakezu, egokiak dira instalazio \n"
-"ohikoenetarako. Aldaketarik egiten baduzu, gutxienez erroko partizio bat\n"
-"definitu behar duzu (\"/\"). Ez aukeratu partizio txikiegirik edo ezin "
-"izango duzu\n"
-"nahikoa software instalatu. Datuak beste partizio batean biltegiratu\n"
-"nahi badituzu, \"/home\"rako partizio bat ere sortu beharko duzu\n"
-"(Linux partizio bat baino gehiago baduzu soilik da posible).\n"
-"\n"
-"Partizio bakoitza honela zerrendatzen da: \"Izena\", \"Edukiera\".\n"
-"\n"
-"\"Izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko "
-"gogorraren zenbakia\",\n"
-"\"partizio-zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\"Disko gogorraren mota\" \"hd\" da zure diskoa IDE disko gogorra bada eta\n"
-"\"sd\" SCSI disko gogorra bada.\n"
-"\n"
-"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\"ren ondoko letra bat "
-"izaten da. IDE\n"
-"disko gogorretan:\n"
-"\n"
-" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia \" esan nahi "
-"du,\n"
-"\n"
-" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi "
-"du,\n"
-"\n"
-" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-"\n"
-"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b"
-"\"letrak \"bigarren SCSI ID baxuena\", etab."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalazioa hainbat CD-ROMetan dago banatuta dago. DrakXk\n"
-"badaki hautatako pakete bat beste CD-ROM batean kokatuta dagoen edo ez, eta\n"
-"uneko CDa atera eta beste bat sartzeko eskatuko dizu behar ahala."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sisteman zein programa instalatu nahi dituzun zehazteko garaia da. Milaka\n"
-"pakete daude Mandrake Linux-entzat erabilgarri, eta ez duzu denak buruz\n"
-"jakin beharrik.\n"
-"\n"
-"CD-ROMetik instalazio estandarra egin behar baduzu, lehendabizi Orain\n"
-"dituzun CDak zehazteko eskatuko zaizu,(Aditu moduan soilik). Egiaztatu CDen\n"
-"etiketak eta nabarmendu instalaziorako erabilgarri dituzun CDei dagozkien\n"
-"laukiak. Sakatu \"Ados\" jarraitzeko prest zaudenean.\n"
-"\n"
-"Paketeak zure ordenagailuaren erabilera zehatz bati dagozkion Taldeetan\n"
-"ordenatzen dira. Taldeak berak lau sekziotan sailkatzen dira:\n"
-"\n"
-" * \"Lan-estazioa\": zure ordenagailua lan-estazio gisa erabiltzeko asmoa\n"
-"baduzu, hautatu talde bat edo gehiago.\n"
-"\n"
-" * \"Garapena\": ordenagailua programatzeko erabili behar baduzu, aukeratu\n"
-"nahi d(it)uzun taldea(k).\n"
-"\n"
-" * \"Zerbitzaria\": ordenagailua zerbitzari izateko erabili nahi baduzu,\n"
-"bertan instalatu nahi dituzun zerbitzurik ohikoenak hautatu ahal izango\n"
-"dituzu.\n"
-"\n"
-" * \"Ingurune grafikoa\": azkenik, hemen hautatuko duzu zure ingurune\n"
-"grafiko gogokoena. Gutxienez bat hautatu behar duzu, lan-estazio grafikoa\n"
-"eduki nahi baduzu!\n"
-"\n"
-"Saguaren kurtsorea talde-izen baten gainean mugituz, talde horri buruzko\n"
-"azalpen-testu labur bat bistaratuko da.\n"
-"\n"
-"\"Pakete indibidualen hautapena\" laukia hauta dezakezu. Lauki hori oso\n"
-"erabilgarri izango zaizu eskaintzen diren paketeak ezagutzen badituzu, edo\n"
-"instalatutako dena erabat kontrolatu nahi baduzu.\n"
-"\n"
-"Instalazioa \"Eguneratu\" moduan hasi baduzu, talde guztia desauta dezakezu\n"
-"beste paketerik instala ez dadin. Hori erabilgarria da lehendik dagoen\n"
-"sistema bat konpontzeko edo eguneratzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Azkenik, pakete indibidualak hautatu ala ez aukeraren arabera, taldetan eta\n"
-"azpitaldetan sailkatutako pakete guztiak dituen zuhaitz bat aurkeztuko\n"
-"zaizu. Zuhaitza arakatzen duzun bitartean, talde osoak, azpitaldeak nahiz\n"
-"pakete indibidualak hautatu ahal izango dituzu.\n"
-"\n"
-"Pakete bat zuhaitzean hautatzen duzun bakoitzean, azalpen bat agertuko da\n"
-"eskuinean. Hautaketa amaitutakoan, egin klik \"Instalatu\" botoian, eta\n"
-"instalazio-prozesua abiaraziko du. Zure hardwarearen abiaduraren arabera\n"
-"eta instalatu behar diren paketeen kopuruaren arabera, denbora-tarte bat\n"
-"beharko da prozesua burutzeko. Erabat burutzeko denboraren estimazioa\n"
-"bistaratzen da pantailan, kafetxo bat hartzeko denbora nahikorik ote duzun\n"
-"jakin dezazun.\n"
-"\n"
-"!! Zerbitzari-pakete bat hautatu baduzu, nahita edo talde oso baten zati\n"
-"zelako, zerbitzari horiek benetan instalatu nahi dituzun berresteko\n"
-"eskatuko zaizu. Mandrake Linux-en barruan, instalatutako edozein zerbitzari\n"
-"lehenetsitako moduan hasieratzen da. Seguruak diren arren eta banaketa\n"
-"argitaratu zen unean arazorik sortu ez bazuten ere, gerta liteke\n"
-"segurtasun-hutsuneak aurkitzea Mandrake Linux-en bertsio hau bukatu\n"
-"ondoren. Zerbitzu jakin batek zer egin behar duen edo zergatik instalatzen\n"
-"den ez badakizu, hautatu \"Ez\". \"Bai\" sakatzean zerrendatutako\n"
-"zerbitzuak instalatuko dira, eta lehenespen gisa automatikoki abiaraziko\n"
-"dira. !!\n"
-"\n"
-"\"Mendekotasun automatikoak\" aukerak Abisua elkarrizketa-koadroa\n"
-"desgaitzen du instalatzaileak pakete bat hautatzen duen bakoitzean. Hori\n"
-"gertatzen da instalazioa ongi burutzeko behar den beste pakete batekiko\n"
-"mendekotasuna erabaki duelako.\n"
-"\n"
-"Zerrendaren beheko aldean dagoen disketearen ikono txikiak aurreko\n"
-"instalazio batean aukeratutako pakete-zerrenda kargatzea ahalbidetzen du.\n"
-"Ikono horretan klik egitean, beste instalazio baten bukaeran aurrez\n"
-"sortutako diskete bat sartzeko eskatuko zaizu. Ikus diskete hori sortzeko\n"
-"moduari buruzko azken urratsaren bigarren iradokizuna."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Zure ordenagailua Internetera edo sare lokal batera konektatu nahi baduzu,\n"
-"egin aukera zuzena. Aktibatu zure gailua aukera zuzena hautatu aurretik\n"
-"DrakXk automatikoki detekta dezan.\n"
-"\n"
-"Mandrake Linux-ek instalazioa egitean Interneteko konexio bat konfiguratzea\n"
-"proposatzen du. Erabilgarri dauden konexioak: modem tradizionala, ISDN\n"
-"modema, ADSL konexioa, kable-modema, eta azkenik, LAN konexio soila\n"
-"(Ethernet).\n"
-"\n"
-"Hemen ez dugu konfigurazio bakoitza zehaztuko. Ziurtatu Interneteko\n"
-"zerbitzu-hornitzailearen edo sistema-administratzailearen parametro guztiak\n"
-"dituzula.\n"
-"\n"
-"Eskuliburuan Interneteko konexioei buruzko kapitulua kontsulta dezakezu\n"
-"konfigurazioaren xehetasunak ezagutzeko, edo bestela, sistema instalatu\n"
-"arte itxaron, eta zure konexioa konfiguratzeko bertan deskribatzen zaizun\n"
-"programa erabili.\n"
-"\n"
-"Sarea geroago, instalazioa egin ondoren, konfiguratu nahi baduzu, edo\n"
-"sare-konexioa konfiguratzen bukatu baduzu, sakatu \"Utzi\"."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Orain abiarazteko orduan zein zerbitzu abiaraztea nahi duzun aukera\n"
-"dezakezu.\n"
-"\n"
-"Hemen uneko instalazioarekin erabilgarri dauden zerbitzu guztiak ageri\n"
-"dira. Berrikusi arretaz eta kendu hautatze-marka abiaraztean beti behar ez\n"
-"direnei.\n"
-"\n"
-"Zerbitzu jakin bat hautatuz, zerbitzu horri buruzko azalpen-testu labur bat\n"
-"eskuratuko duzu. Hala ere, zerbitzu bat erabilgarria den ala ez ziur ez\n"
-"bazaude, seguruagoa da jokabide lehenetsia uztea.\n"
-"\n"
-"Etapa honetan, kontuz ibili zure ordenagailua zerbitzari gisa erabiltzeko\n"
-"asmoa baduzu: ziur aski ez duzu nahi izango behar ez duzun zerbitzurik\n"
-"abiaraztea. Gogoan izan zerbitzu batzuk arriskutsuak izan daitezkeela\n"
-"zerbitzari batean gaitzen badira. Oro har, benetan behar dituzun zerbitzuak\n"
-"soilik hautatu."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux-ek GMT (Greenwich Mean Time) ordua erabiltzen du eta tokian\n"
-"tokiko ordura aldatzen du, hautatutako ordu-zonaren arabera. Desaktibatu\n"
-"nahi baduzu, desautatu \"Hardwarearen ordua GMTn ezarria\" eta hardwarearen\n"
-"ordua eta sistemaren ordua berdinak izango dira. Erosoa da makinan beste\n"
-"sistema eragile bat dagoenerako, esate baterako, Windows.\n"
-"\n"
-"\" Ordu-sinkronizazio automatikoa\" aukerak automatikoki doituko du "
-"erlojua \n"
-"Interneteko urruneko ordu-zerbitzari batekin konektatuz. Aukera ezazu\n"
-"zuregandik hurbil dagoen zerbitzari bat. Eginbide hau erabili ahal izateko \n"
-"Interneteko konexioa beharko duzu, noski. Zure makinan ordu-zerbitzari bat\n"
-"instalatuko du eta zure sare lokaleko beste makina batzuetatik ere erabili \n"
-"ahal izango duzu, nahi izanez gero."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (X Window sistema) GNU/Linux-en interfaze grafikoaren bihotza da, eta\n"
-"Mandrake Linux-en dauden ingurune grafiko guztiak (KDE, Gnome, AfterStep,\n"
-"WindowMaker...) horren araberakoak dira. Atal honetan, DrakX X automatikoki\n"
-"konfiguratzen saiatuko da.\n"
-"\n"
-"Oso gutxitan huts egiten du, baldin eta hardwarea ez bada oso zaharra (edo\n"
-"oso berria). Ongi badoa, X automatikoki abiaraziko du ahalik eta\n"
-"bereizmenik onenarekin, monitorearen tamainaren arabera. Orduan leiho bat\n"
-"agertuko da eta ikus dezakezun galdetuko dizu.\n"
-"\n"
-"\"Aditu\" instalazio bat egiten ari bazara, X konfigurazioaren morroia\n"
-"sartuko duzu. Ikus eskuliburuan dagokion atala morroi honi buruzko\n"
-"informazio gehiago lortzeko.\n"
-"\n"
-"Menua ikus badezakezu eta \"Bai\" erantzun baduzu, DrakX hurrengo urratsera\n"
-"joango da. Mezua ikusi ezin baduzu, konfigurazioa okerra dela esan nahi du\n"
-"horrek, eta proba automatikoki bukatuko da 10 segundo igarota; pantaila\n"
-"leheneratu egingo da."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"X konfigurazioa probatzen duzun lehen aldian, baliteke oso pozik ez\n"
-"geratzea ikusten denarekin (pantaila txikiegia, ezkerrera edo eskuinera\n"
-"mugitua...). Beraz, X zuzen abiarazten bada ere DrakXk gero konfigurazioa\n"
-"zuretzat egokia den galdetuko dizu. Aldatzea ere proposatuko dizu aurki\n"
-"ditzakeen baliozko moduen zerrenda bistaratuz eta bat hautatzeko eskatuz.\n"
-"\n"
-"Azken baliabide gisa, oraindik Xk funtzionatzea lortu ez baduzu, aukeratu\n"
-"\"Aldatu txartel grafikoak\", hautatu \"Zerrendatu gabeko txartela\", eta\n"
-"zein zerbitzari nahi duzun galdetzean, aukeratu \"FBDev\". Hau aukera\n"
-"segurua da, edozein txartel grafiko modernorekin funtzionatzen duena. Gero,\n"
-"aukeratu \"Probatu berriro\" ziur egoteko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Azkenik, interfaze grafikoa abiaraztean ikusi nahi duzun galdetuko zaizu.\n"
-"Kontuan eduki galdera hori konfigurazioa ez probatzea aukeratu baduzu ere\n"
-"egingo zaizula. Jakina, \"Ez\" erantzun nahi izango duzu zure ordenagailuak\n"
-"zerbitzari gisa jokatu behar badu, edo bistaratzea konfiguratuta edukitzea\n"
-"lortzen ez baduzu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Mandrake Linux-en CD-ROMak Berreskuratu modu inkorporatua dauka. Hiru\n"
-"modutan eskura dezakezu: CD-ROMetik abiaraziz, abioan >>F1<< tekla sakatuz\n"
-"eta, gonbitean, >>berreskuratu<< idatziz. Baina zure ordenagailua\n"
-"CD-ROMetik abiarazi ezin bada, urrats hau erabili beharko zenuke bi egoera\n"
-"hauetan gutxienez:\n"
-"\n"
-" * abioko kargatzailea instalatzean, DrakXk zure disko nagusiko abioko\n"
-"sektorea berridatziko du (MBR) (baldin eta ez bazara beste abioko\n"
-"kudeatzaile bat erabiltzen ari), beraz Windows-ekin nahiz GNU/Linux-ekin\n"
-"(zure sisteman Windows baduzu) has zaitezke. Windows atzera berriz\n"
-"instalatu behar baduzu, Microsoft-en instalazio-prozesuak abioko sektorean\n"
-"gainidatziko du eta ezin izango duzu GNU/Linux abiarazi!\n"
-"\n"
-" * arazoren bat sortzen bada eta GNU/Linux disko gogorretik abiarazi ezin\n"
-"baduzu, diskete hau izango da GNU/Linux abiarazteko bide bakarra. Sistema\n"
-"leheneratzeko makina bat sistema-tresna ditu, eta oso erabilgarria da\n"
-"sistemak huts egiten duenean, argindarra joan delako, idazketa-akats bat\n"
-"egin delako, pasahitzean akats tipografiko bat egin delako edo beste\n"
-"zerbait gertatu delako.\n"
-"\n"
-"Urrats honetan klik egitean, unitatean disko bat sartzeko eskatuko zaizu.\n"
-"Sartzen duzun disketeak hutsik egon behar du, edo behar ez dituzun datuak\n"
-"eduki behar ditu. Ez duzu formateatu beharrik DrakXk disko osoa\n"
-"berridatziko baitu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Hona iritsita, Mandrake Linux sistema eragilea disko gogorrean non\n"
-"instalatu aukeratu beharko duzu. Disko gogorra hutsik badago edo lehendik\n"
-"dagoen sistema eragile batek leku erabilgarri guztia betetzen badu,\n"
-"partizioa egin beharko duzu. Funtsean, disko gogorrean partizioa egitea\n"
-"diskoa logikoki zatitzea da, Mandrake Linux sistema berria instalatzeko\n"
-"lekua sortzeko.\n"
-"\n"
-"Partizio-prozesuaren ondorioak itzulbiderik gabekoak izan ohi direnez,\n"
-"partizioa egitea korapilatsua eta deserosoa izan daiteke esperientziarik\n"
-"gabeko erabiltzailea bazara. Zorionez, badago prozesu hau errazten duen\n"
-"morroi bat. Hasi baino lehen, kontsultatu eskuliburua eta hartu behar duzun\n"
-"denbora.\n"
-"\n"
-"Instalazioa Aditu moduan exekutatzen baduzu, Mandrake Linux-en\n"
-"partizio-tresna den DiskDrake sartuko duzu, partizioak doitzea ahalbidetuko\n"
-"baitizu. Ikusi eskuliburuko DiskDrake-ren atala. Instalazioaren\n"
-"interfazetik, morroiak hemen deskribatu bezala erabil ditzakezu,\n"
-"elkarrizketako \"Morroia\" botoian klik eginez.\n"
-"\n"
-"Partizioak jadanik definitu badira, lehendik dagoen instalazio batetik\n"
-"nahiz beste partizio-tresna batetik, hautatu zure Linux sistema\n"
-"instalatzekoak.\n"
-"\n"
-"Partizioak definitu ez badira, morroia erabiliz sortu beharko dituzu. Disko\n"
-"gogorraren konfigurazioaren arabera, hainbat aukera daude erabilgarri:\n"
-"\n"
-" * \"Leku librea erabili\": aukera honek unitate huts(ar)en partizio\n"
-"automatikoa ekarriko du. Ez zaizu beste galderarik egingo.\n"
-"\n"
-" * \"Lehendik dagoen partizioa erabili\": morroiak lehendik dagoen Linux\n"
-"partizio bat edo gehiago detektatu du disko gogorrean. Erabili nahi\n"
-"badituzu, hautatu aukera hau.\n"
-"\n"
-" * \"Erabili Windows-en partizio leku librea \": zure disko gogorrean\n"
-"Microsoft Windows instalatuta badago eta bertako leku erabilgarri guztia\n"
-"betetzen badu, lekua libratu beharko duzu Linux-en datuentzat. Horretarako,\n"
-"Microsoft Windows-en partizioa eta datuak ezaba ditzakezu (ikus \"Ezabatu\n"
-"disko osoa\" edo \"Aditu modua\"ren irtenbideak) edo Microsoft Windows-en\n"
-"partizioaren tamaina aldatu. Tamaina-aldaketa daturik galdu gabe egin\n"
-"daiteke. Irtenbide hau da gomendagarriena zure ordenagailuan Mandrake Linux\n"
-"eta Microsoft Windows erabili nahi badituzu.\n"
-"\n"
-" Aukera hau egin baino lehen, kontuan eduki prozedura honen ondoren\n"
-"Microsoft Windows-en partizioa orain baino txikiagoa izango dela. Leku\n"
-"gutxiago izango duzu, beraz, Microsoft Windows-eko datuak gordetzeko edo\n"
-"software berria instalatzeko.\n"
-"\n"
-" * \"Ezabatu disko osoa\": disko gogorreko datu eta partizio guztiak "
-"ezabatu\n"
-"eta Mandrake Linux sistema berriaz ordeztu nahi badituzu, aukeratu hau.\n"
-"Kontuz ibili irtenbide honekin, ezin izango baituzu aukeran atzera egin\n"
-"berretsi ondoren.\n"
-"\n"
-" !! Aukera hau egiten baduzu, diskoko datu guztiak galdu egingo dira. !!\n"
-"\n"
-" * \"Kendu leihoak\": honek unitateko guztia ezabatuko du eta berriro "
-"hasiko\n"
-"da, denean hasieratik partizioa eginez. Diskoko datu Guztiak galdu egingo\n"
-"dira.\n"
-"\n"
-" !! Aukera hau egiten baduzu, diskoko datu guztiak galduko dira. !!\n"
-"\n"
-" * \"Aditu modua\": hautatu aukera hau zure disko gogorrean partizioa eskuz\n"
-"egin nahi baduzu. Kontuz - aukera ahaltsua, baina arriskutsua da. Datu\n"
-"guztiak oso erraz gal ditzakezu. Beraz, ez aukeratu hau baldin eta ez\n"
-"badakizu zer egiten ari zaren."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Hortxe duzu. Instalazioa burutu da eta zure GNU/Linux sistema prest duzu\n"
-"erabiltzeko. Sakatu \"Ados\" sistema berrabiarazteko. GNU/Linux edo Windows\n"
-"abiaraz dezakezu, nahiago duzuna (abio bikoitza eginez gero), ordenagailua\n"
-"berrabiarazi bezain laster.\n"
-"\n"
-"\"Aurreratua\" botoiak (Aditu moduan bakarrik) beste bi botoi erakutsiko\n"
-"ditu:\n"
-"\n"
-" * \"auto-instalazioko disketea sortu\": eragile baten laguntzarik gabe\n"
-"oraintsu konfiguratu duzun instalazioaren moduko beste bat automatikoki\n"
-"burutuko duen instalazio-disketea sortzeko.\n"
-"\n"
-" Kontuan eduki beste bi aukera daudela erabilgarri botoian klik egitean:\n"
-"\n"
-" * \"Errepikatu\". Hau partzialki automatizatutako instalazioa da,\n"
-"partizio-urratsa (eta hau soilik) interaktibo geratzen denean.\n"
-"\n"
-" * \"Automatizatua\". Erabat automatizatutako instalazioa: disko gogorra\n"
-"erabat berridazten da, eta datu guztiak galdu egingo dira.\n"
-"\n"
-" Eginbide hau oso praktikoa da antzeko ordenagailu asko instalatzean. "
-"Ikus\n"
-"Auto instalazioa atala gure web gunean.\n"
-"\n"
-" * \"Gorde pakete-hautapena\"(*) : paketeen hautapena lehen bezala "
-"gordetzen\n"
-"du. Gero, beste instalazio bat egitean, sartu disketea kontrolatzailean eta\n"
-"exekutatu instalazioa [F1] tekla sakatuz eta >>linux defcfg=\"floppy\"<<\n"
-"bidaliz, laguntza- pantailara joanez.\n"
-"\n"
-"(*) FAT formatudun disketea behar duzu (GNU/Linux-en bat sortzeko, idatzi\n"
-"\"mformat a:\")"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Berriki definitutako edozein partizio bere erabilerarako formateatu behar\n"
-"da (formatua emateak fitxategi-sistema sortzea esan nahi du).\n"
-"\n"
-"Une honetan, baliteke lehendik dauden partizio batzuei berriro formatua\n"
-"eman nahi izatea dauzkaten datuak ezabatzeko. Hori egin nahi baduzu,\n"
-"partizio horiek ere hautatu.\n"
-"\n"
-"Kontuan hartu ez dela beharrezkoa lehendik dauden partizioei formatua\n"
-"ematea. Sistema eragilea daukaten partizioei eman behar diezu formatua\n"
-"(esaterako \"/\", \"/usr\" edo \"/var\"), baina ez mantendu nahi dituzun\n"
-"datuak dituztenei (normalki, \"/home\").\n"
-"\n"
-"Kontuz ibili partizioak hautatzean. Formateatu ondoren, hautatutako\n"
-"partizioetako datu guztiak ezabatu egingo dira eta ezin izango duzu bat ere\n"
-"berreskuratu.\n"
-"\n"
-"Sakatu \"Ados\" partizioak formateatzeko prest zaudenean.\n"
-"\n"
-"Sakatu \"Utzi\" Mandrake Linux sistema eragile berriaren instalaziorako\n"
-"beste partizio bat aukeratu nahi baduzu.\n"
-"\n"
-"Sakatu \"Aurreratua\" diskoko bloke okerretarako egiaztatuko diren\n"
-"partizioak hautatzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Mandrake Linux sistema eragile berria instalatzen ari zara orain. Zenbat\n"
-"pakete instalatu nahi dituzun eta zure ordenagailuak zein abiadura duen,\n"
-"eragiketa honek minutu batzuk edo denbora-tarte handi samarra beharko\n"
-"izango du.\n"
-"\n"
-"Pazientzia izan."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Mandrake Linux instalatzen duzunean, litekeena da pakete batzuk aldatu\n"
-"izana hasierako argitalpenetik. Beharbada akats batzuk konponduko ziren, \n"
-"eta segurtasun-arazoak gaindituko ziren. Eguneratzeez baliatu ahal izan\n"
-"zaitezen, Internetik deskargatzea gomendatzen dizugu.\n"
-"AUkeratu \"Bai\" Interneteko konexioa martxan badaukazu, edo \"Ez\" pakete\n"
-"eguneratuak geroago instalatu nahi badituzu.\n"
-"\n"
-"\"Bai\" aukeratzen baduzu, eguneratzeak eskaintzen dituzten lekuen "
-"zerrenda \n"
-"azalduko da. Aukeratu zuregandik hurbilen dagoena. Paketeak hautatzeko \n"
-"zuhaitza agertuko da orduan: egin hautapena eta sakatu \"Instalatu\" "
-"hautatutako \n"
-"paketek hartu eta instalatzeko, edo \"Utzi\" abortatzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Aurrera jarraitu baino lehen lizentziaren baldintzak arretaz irakurri.\n"
-"Mandrake Linux banaketa osoari dagozkio eta baldintza guztiekin ados ez\n"
-"bazaude, egin klik \"Ezetsi\" botoian; horrela berehala amaituko da\n"
-"instalazioa. Instalazioarekin aurrera jarraitzeko, egin klik \"Ados\"\n"
-"botoian."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Honaino iritsita, ordenagailuarentzat nahi duzun segurtasun-maila\n"
-"aukeratzeko garaia da. Oro har, zenbat eta babesgabeago egon eta zenbat eta\n"
-"funtsezko datu gehiago eduki biltegiratuta, orduan eta segurtasun-maila\n"
-"handiagoa behar da. Segurtasun-maila handiagoa, ordea, erabiltzeko\n"
-"erraztasunaren kalterako izan ohi da. Ikus ``Erreferentziazko\n"
-"eskuliburua''ren MSEC atala maila horien esanahiari buruzko informazio\n"
-"gehiago lortzeko.\n"
-"\n"
-"Zer aukeratu ez badakizu, eutsi aukera lehenetsiari."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Orain, Mandrake Linux sistema instalatzeko zein partizio erabiliko \n"
-"d(ir)en aukeratu behar duzu. Partizioak jadanik definituta badaude, \n"
-"(GNU/Linux-en aurreko instalazio batek edo beste partizio-tresna batek "
-"definituta),\n"
-"lehendik dauden partizioak erabil ditzakezu. Bestela, disko gogorreko\n"
-"partizioak definitu behar dira.\n"
-"\n"
-"Partizioak sortzeko, lehendabizi disko gogor bat hautatu behar duzu. "
-"Partizioa egiteko\n"
-"diskoa hauta dezakezu, \"hda\" sakatuz lehen IDE unitaterako,\n"
-"\"hdb\" bigarrenerako, \"sda\" lehen SCSI unitaterako eta abar.\n"
-"\n"
-"Hautatutako disko gogorraren partizioa egiteko, aukera hauek erabil\n"
-"ditzakezu:\n"
-" * \"Dena garbitu\": aukera honek hautatutako disko gogorreko partizio "
-"guztiak \n"
-"ezabatzen ditu.\n"
-"\n"
-" * \"Auto-esleitu\": aukera honekin automatikoki sor ditzakezu Ext2 eta\n"
-"swap partizioak disko gogorreko leku librean.\n"
-"\n"
-" * \"Gehiago\": eginbide gehiagotarako aukera ematen du:\n"
-"\n"
-" * \"Gorde partizio-taula\": partizio-taula diskete batean gordetzen du. "
-"Baliagarria\n"
-"de geroago partizio-taula berreskuratzeko, behar izanez gero. Oso "
-"gomendagarria \n"
-"da urrats hau egitea.\n"
-"\n"
-" * \"Leheneratu partizio-taula\": lehen gordetako partizio-taula\n"
-"disketetik berreskuratzeko erabil daiteke.\n"
-"\n"
-" * \"Berreskuratu partizio-taula\": partizio-taula hondatuta badago, \n"
-"berreskuratzen saia zaitezke aukera honen bidez. Kontuz ibili eta gogoan \n"
-"izan huts egin dezakeela.\n"
-"\n"
-" * \"Birkargatu partizio-taula\": aldaketa guztiak desegin nahi badituzu "
-"eta \n"
-"hasierako partizio-taula kargatu nahi baduzu, aukera hau erabil dezakezu \n"
-"\n"
-" * \"euskarri aldagarriak automuntatzea\": aukera hau desgaitzen baduzu, "
-"euskarri \n"
-"aldagarriak (disketeak, CD-ROMak eta horrelakoak) eskuz muntatu eta \n"
-"desmuntatzera behartuko dituzu erabiltzaileak.\n"
-"\n"
-" * \"Morroia\": erabili aukera hau disko gogorreko partizioa egiteko "
-"morroia\n"
-"erabili nahi baduzu. Partizioak egiten ongi ez badakizu, morroia erabiltzea\n"
-"gomendatzen dizugu.\n"
-"\n"
-" * \"Desegin\": aukera hau aldaketak bertan behera uzteko erabil "
-"dezakezu.\n"
-"\n"
-" * \"Eginda\": disko gogorrean partizioak egiten bukatutakoan, aldaketak\n"
-"berriro diskoan gordeko ditu.\n"
-"\n"
-"Oharra: edozein aukera eskura dezakezu teklatuaren bidez. Partizio batetik \n"
-"bestera joateko, [Tab] eta [Gora/Behera] geziak erabil ditzakezu.\n"
-"\n"
-"Partizio bat hautatuta dagoenean, aukera hauek dituzu:\n"
-"\n"
-" * Ktrl-c beste partizio bat sortzeko (partizio huts bat hautatuta "
-"dagoenean);\n"
-"\n"
-" * Ktrl-d partizio bat ezabatzeko;\n"
-"\n"
-" * Ktrl-m muntatze-puntua ezartzeko.\n"
-"\n"
-"Erabil daitezkeen fitxategi-sistema desberdinei buruzko informazioa nahi \n"
-" baduzu, irakurri 'Erreferentzia-eskuliburu'ko ext2fs kapitulua.\n"
-"\n"
-"PPC makina batean instalatu behar baduzu, gutxienez 1 MBko HFS \"bootstrap"
-"\"\n"
-"partizio txiki bat sortu nahi izango duzu, yaboot abioko kargatzaileak\n"
-"erabiliko duena. Partizioa zertxobait handiagoa egitea hautatzen baduzu, "
-"adibidez 50 MBkoa, leku egokia izan daiteke ordezko nukleo bat eta ramdisk \n"
-"imajinak biltegiratzeko emergentziazko abioa egin ahal izateko."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Microsoft Windows partizio bat baino gehiago detektatu da zure disko\n"
-"gogorrean. Aukeratu Mandrake Linux sistema eragile berria instalatzeko\n"
-"tamainaz aldatu nahi duzuna.\n"
-"\n"
-"Partizio bakoitza honela azaltzen da: \"Linux izena\", \"Windows izena\"\n"
-"\"Edukiera\".\n"
-"\n"
-"\"Linux izena\" honela egituratzen da: \"disko gogorraren mota\", \"disko \n"
-"gogorraren zenbakia\", \"partizio-zenbakia\" (adibidez, \"hda1\").\n"
-"\n"
-"\"Disko gogorraren mota\" \"hd\" da zure diskoa IDE disko gogorra bada eta\n"
-"\"sd\" SCSI disko gogorra bada.\n"
-"\n"
-"\"Disko gogorraren zenbakia\" beti \"hd\" edo \"sd\"ren ondoko letra bat \n"
-"izaten da. IDE disko gogorretan:\n"
-"\n"
-" * \"a\"k \"IDE kontroladore primarioko disko gogor nagusia\" esan nahi du,\n"
-"\n"
-" * \"b\"k \"IDE kontroladore primarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-" * \"c\"k \"IDE kontroladore sekundarioko disko gogor nagusia\" esan nahi "
-"du,\n"
-"\n"
-" * \"d\"k \"IDE kontroladore sekundarioko mendeko disko gogorra\" esan nahi "
-"du,\n"
-"\n"
-"SCSI disko gogorretan, \"a\" letrak \"SCSI ID baxuena\" esan nahi du, \"b\"\n"
-"letrak \"bigarren SCSI ID baxuena\", etab.\n"
-"\"Windows izena\" Windows-en dagoen disko gogorraren letra da (lehen\n"
-"diskoak edo partizioak \"C:\" du izena)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Izan pazientzia. Eragiketa honek minutu batzuk beharko ditu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakXk lehenetsitako instalazioa (\"Gomendatua\") egin nahi duzun edo\n"
-"kontrol handiagoa eduki nahi duzun (\"Aditua\") jakin behar du orain.\n"
-"Gainera, instalazio berri bat egiteko edo lehendik dagoen Mandrake Linux\n"
-"sistema eguneratzeko aukera izango duzu. \"Instalatu\" sakatzen baduzu,\n"
-"sistema zaharra erabat garbituko da. Hautatu \"Bertsio-berritu\" lehendik\n"
-"dagoen sistema baten bertsioa berritzen edo konpontzen ari bazara.\n"
-"\n"
-"Aukeratu \"Instalatu\" Mandrake Linux-en beste bertsiorik ez badago edo\n"
-"hainbat sistema-eragileren artean abiarazi nahi baduzu.\n"
-"\n"
-"Aukeratu \"Eguneratu\" Mandrake Linux-en jadanik instalatutako bertsio bat\n"
-"eguneratu edo konpondu nahi baduzu.\n"
-"\n"
-"GNU/Linux-i buruz dakizunaren arabera, aukeratu ondoko hauetako bat\n"
-"Mandrake Linux sistema eragilea instalatzeko edo eguneratzeko:\n"
-"\n"
-" * Gomendatua: aukeratu hau GNU/Linux sistema eragilea inoiz instalatu ez\n"
-"baduzu. Instalazioa oso erraza izango da eta galdera batzuk besterik ez\n"
-"zaizkizu egingo.\n"
-"\n"
-" * Aditua: GNU/Linux ongi ezagutzen baduzu, instalazio-mota hau aukera\n"
-"dezakezu. Instalazio adituak oso instalazio pertsonalizatua egiteko aukera\n"
-"emango dizu. Galdera batzuei erantzutea zaila izan daiteke GNU/Linux ongi\n"
-"ezagutzen ez baduzu, beraz ez aukeratu hau baldin eta zer egiten ari zaren\n"
-"ez badakizu."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalki, DrakXk teklatu egokia hautatzen dizu (aukeratutako hizkuntzaren\n"
-"arabera) eta urrats hau ez duzu ikusi ere egingo. Dena den, baliteke zure\n"
-"hizkuntzari zehazki dagokion teklatua ez edukitzea: adibidez, ingelesez\n"
-"dakien suitzarra bazara, baliteke hala ere Suitzako teklatua nahi izatea.\n"
-"Edo ingeles hiztuna bazara baina Quebec-en bazaude, egoera berean egon\n"
-"zintezke. Bi kasuetan, instalazio-urrats honetan atzera jo eta teklatu\n"
-"egokia hautatu beharko duzu zerrendan.\n"
-"\n"
-"Egin klik \"Gehiago\" botoian onartzen diren teklatuen zerrenda osoa\n"
-"ikusteko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Aukeratu instalaziorako eta sistemaren erabilerarako hizkuntzarik\n"
-"gogokoena.\n"
-"\n"
-"\"Aurreratua\" botoian klik egiten baduzu, instalaziorako beste hizkuntza\n"
-"batzuk aukeratu ahal izango dituzu lan-estazioan. Beste hizkuntza bat\n"
-"hautatzean, sistemaren dokumentaziorako eta aplikazioetarako fitxategi\n"
-"espezifikoak instalatuko dira. Adibidez, zure ordenagailuan Espainiako\n"
-"erabiltzaileei ostatu eman behar badiezu, zuhaitz-ikuspegian hautatu\n"
-"euskara hizkuntza nagusi gisa, eta Aurreratua atalean, egin klik\n"
-"\"espainiera|Espainia\"ri dagokion izar grisean.\n"
-"\n"
-"Kontuan hartu hizkuntza bat baino gehiago instala daitezkeela. Lokal\n"
-"gehigarriak aukeratutakoan, egin klik \"Ados\" botoian jarraitzeko."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"Lehenespenez, DrakXk bi botoiko Sagua duzula suposatuko du, eta hirugarren\n"
-"botoia emula dezan konfiguratuko du. DrakXk automatikoki jakingo du sagua\n"
-"PS/2, seriekoa edo USB motakoa den.\n"
-"\n"
-"Beste mota bateko sagua zehaztu nahi baduzu, hautatu dagokion mota\n"
-"zerrendan.\n"
-"\n"
-"Lehenetsitakoa ez den sagu bat aukeratzen baduzu, sagua egiaztatzeko\n"
-"pantailan agertuko zaizu. Erabili botoiak eta gurpila ezarpenak egokiak\n"
-"direla egiaztatzeko. Saguak ez badu behar bezala funtzionatzen, sakatu\n"
-"zuriune-barra edo ITZULI \"Uzteko\", eta aukeratu berriro."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Hautatu ataka zuzena. Adibidez, MS Windows-eko \"COM1\" atakak\n"
-"\"ttyS0\"du izena GNU/Linux-en."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Hau da erabakigunerik funtsezkoena GNU/Linux sistemaren Segurtasunerako:\n"
-"\"root\"-aren pasahitza sartu duzu. \"root\" sistema-administratzailea da\n"
-"eta berak bakarrik dauka eguneratzeko, erabiltzaileak gehitzeko, sistemaren\n"
-"konfigurazio orokorra aldatzeko eta abar egiteko baimena. Bi hitzetan,\n"
-"\"root\"-ak dena egin dezake! Horregatik, asmatzen zaila den pasahitza\n"
-"aukeratu behar duzu - DrakXk errazegia den esango dizu. Ikus dezakezunez,\n"
-"pasahitza ez sartzea ere aukera dezakezu, baina horrelakorik ez egiteko\n"
-"aholkua emango genizuke, arrazoi batengatik: ez pentsa GNU/Linux abiarazi\n"
-"duzulako zure beste sistema eragileek akatsik eduki ezin dutenik.\n"
-"\"root\"-ak muga guztiak gaindi ditzakeenez, eta partizioetan arduragabeki\n"
-"sartuz partizioetako datu guztiak nahi gabe ezaba ditzakeenez,\n"
-"garrantzitsua da \"root\" bilakatzea zaila izatea.\n"
-"\n"
-"Pasahitzak karaktere alfanumerikoen nahasketa izan behar du eta gutxienez 8\n"
-"karaktere izan behar ditu. Ez idatzi inoiz \"root\"-aren pasahitza -\n"
-"sistema errazegi konprometituko bailuke.\n"
-"\n"
-"Dena den, pasahitza ez egin luzeegia, ahalegin handirik gabe gogoratu behar\n"
-"duzulako.\n"
-"\n"
-"Pasahitza ez da idatzi ahala pantailan bistaratuko. Horregatik, pasahitza\n"
-"bi aldiz idatzi beharko duzu, akats tipografikoen aukera murrizteko. Akats\n"
-"tipografiko bera bi aldiz egiten baduzu, pasahitz \"oker\" hori erabili\n"
-"beharko da konektatzen zaren lehen aldian.\n"
-"\n"
-"Aditu moduan, NIS edo LDAP moduko autentifikazio-zerbitzari batekin\n"
-"konektatuko zaren galdetuko zaizu.\n"
-"\n"
-"Zure sareak autentifikaziorako LDAP (edo NIS) protokoloa erabiltzen badu,\n"
-"hautatu \"LDAP\" (edo \"NIS\") autentifikazio gisa. Ezagutzen ez baduzu,\n"
-"galdetu sareko administratzaileari.\n"
-"\n"
-"Zure ordenagailua administratutako ezein sareri konektatua ez badago,\n"
-"beharbada \"Fitxategi lokalak\" aukeratu nahi izango dituzu\n"
-"autentifikaziorako."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO eta GRUB GNU/Linux-en abioko kargatzaileak dira. Etapa hau,normalean,\n"
-"erabat automatizatuta egoten da. Izan ere, DrakXk diskoaren abioko sektorea\n"
-"aztertu eta horren arabera jokatzen baitu, hor aurkitutakoaren arabera:\n"
-"\n"
-" * Windows-en abioko sektorea aurkitzen bada, GRUB/LILO abioko sektore "
-"batez\n"
-"ordeztuko du. Beraz, GNU/Linux edo beste OS bat kargatu ahal izango duzu;\n"
-"\n"
-" * GRUB edo LILO abioko sektore bat aurkitzen bada, berriz ordeztuko du;\n"
-"\n"
-"Zalantzarik badago, DrakXk hainbat aukera duen elkarrizketa-koadroa\n"
-"bistaratuko du.\n"
-"\n"
-" * \"Erabili beharreko abioko kargatzailea\": hiru aukera dituzu:\n"
-"\n"
-" * \"LILO menu grafikoarekin\": LILO bere interfaze grafikoarekin "
-"nahiago\n"
-"baduzu.\n"
-"\n"
-" * \"GRUB\": GRUB nahiago baduzu (testu-menua).\n"
-"\n"
-" * \"LILO testu-menuarekin\": LILO bere testu-menuaren interfazearekin\n"
-"nahiago baduzu.\n"
-"\n"
-" * \"Abioko gailua\": kasu gehienetan, ez duzu (\"/dev/hda\") lehenetsia\n"
-"aldatuko, baina nahiago baduzu, abioko kargatzailea bigarren unitate\n"
-"gogorrean (\"/dev/hdb\") edo diskete batean (\"/dev/fd0\")instala daiteke.\n"
-"\n"
-" * \"Atzeratu lehenetsitako irudia abiarazi baino lehen\": ordenagailua\n"
-"berrabiaraztean, hau da erabiltzaileari aukeratzeko emandako atzerapena -\n"
-"abioko kargatzailearen menuan lehenetsia ez den beste sarrera bat.\n"
-"\n"
-"!! Kontuan eduki abioko kargatzaile bat ez instalatzea aukeratzen baduzu\n"
-"(hemen \"Utzi\" hautatuz), Mandrake Linux sistema abiarazteko bide bat\n"
-"dagoela! Beraz, ziurtatu edozein aukera aldatu baino lehen zer egiten duzun\n"
-"badakizula. !!\n"
-"\n"
-"Elkarrizketa-koadro honetako \"Aurreratua\" botoian klik eginda aukera\n"
-"aurreratu ugari lortuko dituzu, erabiltzaile adituentzat erreserbatuak.\n"
-"\n"
-"Mandrake Linux-ek abioko bere kargatzailea instalatzen du, eta GNU/Linux\n"
-"edo zure sisteman duzun beste edozein sistema eragile abiarazteko aukera\n"
-"emango dizu.\n"
-"\n"
-"Ordenagailuan beste sistema eragile bat instalatuta baduzu, automatikoki\n"
-"gehituko zaio abioko menuari. Hemen, lehendik dauden aukerak optimizatzea\n"
-"hauta dezakezu. Lehendik dagoen sarrera batean klik bikoitza egitean, bere\n"
-"parametroak aldatu edo kendu egingo dituzu; \"Gehitu\"k beste sarrera bat\n"
-"sortzen du; eta \"Eginda\" instalazioaren hurrengo urratsera joaten da."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) eta grub abioko kargatzaileak dira: GNU/Linux edo \n"
-"ordenagailuan dagoen beste edozein sistema eragile abiaraz dezakete.\n"
-" Normalki, beste sistema eragile horiek ongi detektatzen eta instalatzen\n"
-"dira. Horrela ez bada, pantaila honetan sarrera bat eskuz gehi \n"
-"dezakezu. Kontuz ibili parametroak aukeratzean okerrik ez egiteko.\n"
-"\n"
-"Halaber, baliteke beste sistema eragile horietan inori sartzen utzi nahi ez\n"
-"izatea. Horretarako, sistema eragile horien sarrerak ezaba ditzakezu. Baina\n"
-"gero, abioko disko bat beharko duzu beste sistema eragile horiek abiarazteko!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"GNU/Linux-ekin abiarazteko behar den informazioa non kokatu nahi duzun \n"
-"adierazi behar duzu.\n"
-"\n"
-"Zer egiten ari zaren oso ongi ez badakizu, aukeratu \"Unitateko lehen\n"
-"sektorea (MBR)\"."
-
-#: ../../help.pm_.c:729
-#, fuzzy
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Hemen zure ordenagailuaren inprimatzeko sistema hautatuko dugu. Beste\n"
-"SE batzuek bakarra eskainiko dute beharbada, baina Mandrake-k hiru \n"
-"eskaintzen ditu.\n"
-"\n"
-" * \"pdq\" - ``print, don't queue'' esan nahi du, hau da, 'inprimatu, ez "
-"egon\n"
-"ilaran'. Aukera egokia da inprimagailua zuzenean konektatuta baduzu, papera\n"
-"trabatzen denean ohartu nahi baduzu eta sareko inprimagailurik ez baduzu. "
-"Sareko oso kasu\n"
-"sinpleak maneiatuko ditu eta mantso samarra da sarerako. Aukeratu\n"
-"\"pdq\" GNU/Linux-eko zure lehen bidaia bada. Instalazioa egin\n"
-"ondoren aukerak aldatu nahi badituzu, exekutatu Mandrake-ren kontrol-"
-"zentroko\n"
-"PrinterDrake eta egin klik 'aditua' botoian.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'' oso ona da zure inprimagailu\n"
-"lokalean inprimatzeko eta baita munduaren beste aldean ere. Sinplea da eta \n"
-"\"lpd\" inprimatze-sistema zaharraren zerbitzari edo bezero gisa joka "
-"dezake,\n"
-"beraz bateragarria da lehenagoko sistemekin. Gauza asko egin ditzake,\n"
-"baina oinarrizko konfigurazioa \"pdq\" bezain erraza da. \"lpd\" zerbitzari "
-"bat\n"
-"emulatzeko behar baduzu, \"cups-lpd\" daemon-a aktibatu behar duzu. "
-"Inprimagailuaren\n"
-"aukerak hautatzeko edo inprimatzeko interfaze grafikoak ditu.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. Sistema honek\n"
-"besteek egin ditzaketen gauza bertsuak egin ditzake, baina Novell sarean\n"
-"muntatutako inprimagailuetan inprimatuko du, IPX protokoloa onartzen "
-"duelako,\n"
-"eta shell komandoetan zuzenean inprima dezakeelako. Novell behar baduzu "
-"edo \n"
-"hodirik erabili gabe komandoetan inprimatu behar baduzu, erabili lprNG.\n"
-"Bestela, hobe da CUPS, sareetan lan egiteko sinpleagoa eta hobea delako."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX orain zure ordenagailuan dagoen edozein IDE gailu detektatzen ari da.\n"
-"Zure sistemako PCI SCSI txartel bat edo gehiago ere eskaneatuko ditu. SCSI\n"
-"txartela aurkitzen badu, DrakXek automatikoki instalatuko du unitate\n"
-"egokia.\n"
-"\n"
-"Hardwarearen detekzioak batzuetan hardware-elementurik detektatuko ez\n"
-"duenez, DrakXk PCI SCSI txartelik ote dagoen berresteko eskatuko dizu.\n"
-"Sakatu \"Bai\" zure ordenagailuan SCSI txartela instalatuta dagoela\n"
-"badakizu. SCSI txartelen zerrenda bat aurkeztuko zaizu, bertan aukeratzeko.\n"
-"Sakatu \"Ez\" SCSI hardwarerik ez baduzu. Ziur ez bazaude, zure\n"
-"ordenagailuan detektatutako hardware-zerrenda ikus dezakezu \"Ikus\n"
-"hardwareari buruzko informazioa\" hautatuz eta \"Ados\" sakatuz. Aztertu\n"
-"hardware- zerrenda eta egin klik \"Ados\" botoian SCSI interfazearen\n"
-"galderara itzultzeko.\n"
-"\n"
-"Moldagailua eskuz zehaztu baduzu, DrakXk haren aukerak zehaztu nahi dituzun\n"
-"galdetuko dizu. Hardwareak hasieratzeko behar dituen aukera zehatzak bila\n"
-"ditzan, hardwarea aztertzen utzi beharko zenioke DrakXri. Horrek ondo\n"
-"funtzionatu ohi du.\n"
-"\n"
-"DrakXk pasatu behar diren aukerak egiaztatu ezin baditu, aukerak eskuz eman\n"
-"beharko dizkiozu kontrolatzaileari.Eskatutako parametroak\n"
-"frabrikatzailearen web orritik (Interneteko sarbidea baduzu) edo Microsoft\n"
-"Windows-etik (hardware hau zure sisteman Windows-ekin erabili baduzu)\n"
-"berreskuratzeko aholkuak lortzeko, ikus ``Erabiltzailearen gida '' (3.\n"
-"atala, \"Hardwareari buruzko informazioa biltzen\" sekzioa) ."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Sarrera gehiago erants ditzakezu yaboot-entzat, beste sistema eragile\n"
-"batzuk, nukleo alternatiboak edo emergentziazko abioko imajina gehitzeko.\n"
-"\n"
-"Beste SEentzat, etiketa eta erroko partizioa soilik da sarrera.\n"
-"\n"
-"Linux-entzat, hainbat aukera daude:\n"
-"\n"
-" * Etiketa: yaboot-en gonbitean idatzi beharko duzun izena da, abioko\n"
-"aukera hau hautatzeko.\n"
-"\n"
-" * Imajina: abiarazi beharreko nukleoaren izena izango litzateke. Normalki, "
-"vmlinux\n"
-"edo vmlinux-en aldaera bat, luzapen batekin.\n"
-"\n"
-" * Root: zure Linux instalazioaren \"root\" gailua edo \"/\" \n"
-"\n"
-" * Erantsi: Apple hardwarean, nukleoa eransteko aukera bideo-hardwarea "
-"hasieratzen\n"
-"laguntzeko erabiltzen da askotan, edo ohiko Apple saguetan gehienetan\n"
-"falta izaten diren 2. eta 3. botoien emulazioa gaitzeko teklatuan.\n"
-" Hona hemen adibide batzuk:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: aukera hau hasierako moduluak kargatzeko erabil daiteke, abioko\n"
-"gailua erabilgarri egon aurretik, edo ramdisk imajina bat kargatzeko \n"
-"emergentziazko abioa egin behar denean.\n"
-"\n"
-" * Initrd-tamaina: ramdisk-tamaina lehenetsia 4.096 bytekoa izan ohi da. "
-"Ramdisk\n"
-"handi bat esleitu behar baduzu, aukera hau erabil dezakezu.\n"
-"\n"
-" * Irakurri/idatzi: normalki \"root\" partizioa irakurtzeko soilik agertzen "
-"da hasieran,\n"
-"fitxategi-sistemak egiaztatu ahal izateko, sistema \"aktibo\" egin "
-"aurretik.\n"
-"Hemen, aukera hori gainidatz dezakezu.\n"
-"\n"
-" * BideorikEz: Apple bideoaren hardwarea bereziki problematikoa bada,\n"
-"aukera hau hauta dezakezu \"bideorikez\" moduan abiarazteko, jatorrizko\n"
-"frame buffer euskarriarekin.\n"
-"\n"
-" * Lehenetsia: sarrera hau hautatzen du Linux-en hautapen lehenetsi gisa,\n"
-"eta yaboot-en gonbitean SARTU sakatuz hauta daiteke. Sarrera hau\n"
-"\"*\" batez nabarmenduko da, [Tab] sakatzen baduzu abioko hautapenak\n"
-"ikusteko."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"NewWorld MacIntosh hardwarearentzako abioko kargatzaile bat da Yaboot. GNU/"
-"Linux, \n"
-"MacOS, edo MacOSX abiaraz dezake, ordenagailuan badago.\n"
-"Normalean,\n"
-"beste sistema eragile horiek ongi detektatzen eta instalatzen dira. Horrela "
-"ez bada,\n"
-"pantaila honetan sarrera bat eskuz gehi dezakezu. Kontuz ibili\n"
-"parametroak aukeratzean okerrik ez egiteko\n"
-"\n"
-"Yaboot-en aukera nagusiak hauek dira:\n"
-"\n"
-" * Hasierako mezua: abioko gonbitaren aurretik bistaratzen den mezu-testu\n"
-"laburra.\n"
-"\n"
-" * Abioko gailua: adierazi non kokatu nahi duzun GNU/Linux-ekin abiarazteko "
-"behar den\n"
-"informazioa. Normalean, bootstrap partizio bat konfiguratuko duzu lehenago\n"
-"informazio hau edukitzeko.\n"
-"\n"
-" * Open Firmware atzerapena: LILOrekin ez bezala, bi atzerapen daude "
-"erabilgarri\n"
-"yaboot-ekin. Lehen atzerapena segundotan neurtzen da, eta hemen CD, OF "
-"abioa\n"
-"MacOS edo Linux aukera dezakezu.\n"
-"\n"
-" * Nukleoaren abioaren denbora-muga: denbora-muga hau LILOren abioko "
-"atzerapenaren antzekoa da.\n"
-"Linux hautatu ondoren, 0,1 segundoko atzerapen hau izango duzu "
-"lehenetsitako\n"
-"nukleo-deskribapena hautatu aurretik.\n"
-"\n"
-" * Gaitu CDtik abiaraztea?: aukera hau hautatzen baduzu, \"C\" aukeratu ahal "
-"izango\n"
-"duzu CDarentzat abioko lehen gonbitean.\n"
-"\n"
-" * Gaitu OF abioa?: aukera hau hautatzen baduzu, \"N\" aukeratu ahal izango\n"
-"duzu Open Firmware-rentzat abioko lehen gonbitean.\n"
-"\n"
-" * SE lehenetsia: lehenespenez zein SE abiaraziko den hauta dezakezu Open\n"
-"Firmware Atzerapena igarotzen denean."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/eu/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"Hemen zure ordenagailuari dagozkion parametroak aurkezten dira. Zein\n"
-"hardware instalatuta daukazun, ondoko sarrerak ikusiko dituzu - edo ez:\n"
-"\n"
-" * \"Sagua\": egiaztatu saguaren konfigurazioa eta, beharrezkoa bada, egin\n"
-"klik botoian aldatzeko.\n"
-"\n"
-" * \"Teklatua\": egiaztatu une honetako teklatuaren konfigurazioa eta,\n"
-"beharrezkoa bada, egin klik botoian aldatzeko.\n"
-"\n"
-" * \"Ordu-zona\": DrakXk, lehenespenez, aukeratutako hizkuntzatik asmatzen\n"
-"du zure ordu-zona. Baina teklatuaren aukerari dagokionez, baliteke\n"
-"aukeratutako hizkuntzari dagokion herrialdean ez egotea. Horregatik,\n"
-"\"Ordu-zona\" botoian klik egin beharko duzu ordularia zu zauden\n"
-"ordu-zonaren arabera konfiguratzeko.\n"
-"\n"
-" * \"Inprimagailua\": \"Inprimagailurik ez\" botoian klik eginez,\n"
-"inprimagailuaren konfigurazio-morroia irekiko da.\n"
-"\n"
-" * Zure sisteman \"Soinu-txartela\": soinu-txartela detektatzen bada, hemen\n"
-"bistaratuko da. Instalatzean ezin da aldaketarik egin.\n"
-"\n"
-" * \"telebista-txartela\": zure sisteman telebista-txartela detektatzen\n"
-"bada, hemen bistaratuko da. Instalatzean ezin da aldaketarik egin.\n"
-"\n"
-" * \"ISDN txartela\": zure sisteman ISDN txartela detektatzen bada, hemen\n"
-"bistaratuko da. Egin klik botoian dagozkion parametroak aldatzeko."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Aukeratu Mandrake Linux-en partizio berria instalatzeko ezabatu nahi duzun\n"
-"disko gogorra. Kontuz ibili, bertako datu guztiak galdu egingo dira eta "
-"ezin\n"
-"izango dira berreskuratu!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Sakatu \"Ados\" disko gogor honetako datu eta partizio guztiak ezabatu \n"
-"nahi badituzu. Kontuz ibili, \"Ados\" sakatu ondoren, ezin izango duzu \n"
-"disko gogor honetako daturik eta partiziorik berreskuratu,\n"
-"Windows-eko datuak barne.\n"
-"\n"
-"Sakatu \"Utzi\" disko gogor honetako daturik eta partiziorik galdu gabe\n"
-"eragiketa hau bertan behera uzteko."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "%s ere formateatu behar duzu"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Zerbitzari hau(ek) hautatu d(it)uzu: %s\n"
-"\n"
-"\n"
-"Zerbitzari horiek lehenespenez aktibatzen dira. Ez dute segurtasun-arazo "
-"ezagunik,\n"
-"baina berriren bat ager liteke. Kasu horretan, ziurtatu ahal bezain laster\n"
-"eguneratzen duzula.\n"
-"\n"
-"\n"
-"Zerbitzari horiek benetan instalatu nahi dituzu?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ezin da difusioa erabili NIS domeinurik gabe"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sartu FAT formatuko diskete bat %s unitatean"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Diskete honek ez du FAT formaturik"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Gordetako pakete-hautapen hau erabiltzeko, abiarazi instalazioa ``linux "
-"defcfg=floppy''rekin"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Errorea %s fitxategia irakurtzean"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Zure ordenagailuko hardware batzuek kontrolatzaile ``jabea'' behar dute.\n"
-"Horiei buruzko informazioa hemen aurki dezakezu: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Erroko partizioa eduki behar duzu.\n"
-"Horretarako, sortu partizio bat (edo egin klik lehendik dagoen batean).\n"
-"Gero aukeratu ``Muntatze-puntua'' ekintza eta ezarri `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Swap partizio bat eduki behar duzu"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Ez duzu swap partiziorik\n"
-"\n"
-"Jarraitu hala ere?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "FAT partizio bat eduki behar duzu /boot/efi-n muntatuta"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Erabili leku librea"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ez dago partizio berriak esleitzeko adina leku"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Lehendik dagoen partizioa erabili"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Ez dago erabiltzeko moduko partiziorik"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Erabili Windows partizioa atzera-begiztarako"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Zein partizio erabili nahi duzu Linux4Win-erako?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Aukeratu tamainak"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Erroko partizioaren tamaina MBtan: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Swap partizioaren tamaina MBtan: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Erabili Windows-en partizioko leku librea"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Zein partiziori aldatu nahi diozu tamaina?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Windows fitxategi-sistemaren mugak kalkulatzen"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT tamaina-aldatzaileak ezin du zure partizioa maneiatu, \n"
-"errore hau gertatu da: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Zure Windows partizioa fragmentatuegia dago, exekutatu ``defrag'' lehendabizi"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"KONTUZ!\n"
-"\n"
-"DrakX Windows partizioari tamaina aldatzera doa. Kontuz ibili:\n"
-"eragiketa hau arriskutsua da. Inoiz ez baduzu horrelakorik egin, \n"
-"hobe izango duzu instalaziotik irten eta scandisk exekutatzea \n"
-"Windows-en (eta nahi izanez gero defrag); gero, hasi berriro \n"
-"instalazioarekin. Datuen babeskopia egitea ere komeni da.\n"
-"Ziur zaudenean, sakatu Ados."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Zein tamaina utzi nahi duzu Windows-entzat"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "%s partizioan"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT tamaina-aldaketak huts egin du: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ez dago FAT partiziorik tamainaz aldatzeko edo atzera-begizta gisa "
-"erabiltzeko (edo ez dago nahikoa leku)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Ezabatu disko osoa"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Kendu Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Disko gogor bat baino gehiago duzu, zeinetan instalatuko duzu linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s unitatean dauden partizio eta datu GUZTIAK galdu egingo dira"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Disko-partizio pertsonalizatua"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Erabili fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Orain egin dezakezu %s partizioa.\n"
-"Egin ondoren, ez ahaztu `w' erabiliz gordetzea"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Ez duzu behar adina leku libre Windows partizioan"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ezin dut instalatzeko lekurik aurkitu"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Partizio-morroiak irtenbide hauek aurkitu ditu:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partizioak huts egin du: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Sarea irekitzen"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Sarea ixten"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Errore bat gertatu da, baina ez dakit behar bezala maneiatzen.\n"
-"Jarraitu zure ardurapean."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Bikoiztu %s muntatze-puntua"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Pakete garrantzitsu batzuk ez dira behar bezala instalatu.\n"
-"Zure CDROM unitateak edo CDROMak akatsak ditu.\n"
-"Probatu CDROMa ordenagailu instalatu batean \"rpm -qpl Mandrake/RPMS/*.rpm\" "
-"erabiliz.\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Ongi etorri %s(e)ra"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ez dago diskete-unitate erabilgarririk"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "`%s' urratsean sartzen\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Sistemak baliabide gutxi ditu. Arazoak izan ditzakezu Mandrake \n"
-"Linux instalatzeko. Horrela bada, testu-instalazioa egiten saia zaitezke. "
-"Horretarako,\n"
-"sakatu `F1' CDROMetik abiaraztean, gero sartu `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalazio-klasea"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Aukeratu instalazio-klase hauetako bat:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Hautatu dituzun taldeen tamaina osoa %d MBkoa da gutxi gorabehera.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Tamaina hori baino gutxiago instalatu nahi,\n"
-"baduzu, hautatu instalatu nahi duzun pakete-portzentajea.\n"
-"\n"
-"Ehuneko txiki batekin pakete garrantzitsuenak soilik instalatuko dira;\n"
-"%% 100 aukeratzen baduzu, hautatutako pakete guztiak instalatuko ditu."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Pakete horien %% %d instalatzeko lekua besterik ez duzu diskoan.\n"
-"\n"
-"Hori baino gutxiago instalatu nahi baduzu,\n"
-"hautatu instalatu nahi duzun pakete-portzentajea.\n"
-"Ehuneko txiki batekin pakete garrantzitsuenak soilik instalatuko ditu;\n"
-"%% %d hautatzen baduzu, ahalik eta pakete gehien instalatuko ditu."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Hurrengo urratsean zehazkiago aukeratu ahal izango dituzu."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Instalatzeko pakete-ehunekoa"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakete-taldearen hautapena"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Pakete indibidualen hautapena"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Guztira: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pakete txarra"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Izena: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Bertsioa: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamaina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Garrantzia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Ezin duzu pakete hori hautatu: ez dago instalatzeko lekurik"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Ondorengo pakete hauek instalatuko dira"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Ondorengo pakete hauek kenduko dira"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ezin duzu pakete hau hautatu/desautatu"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Nahitaezko paketea da, ezin da desautatu"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ezin duzu pakete hau desautatu. Dagoeneko instalatuta dago"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Pakete hau bertsio-berritu beharrean dago\n"
-"Ziur zaude desautatu nahi duzula?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ezin duzu pakete hau desautatu. Bertsio-berritu egin behar da"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Erakutsi automatikoki hautatutako paketeak"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalatu"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Kargatu/Gorde disketean"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Pakete-hautapena eguneratzen"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Gutxieneko instalazioa"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Aukeratu instalatu nahi dituzun paketeak"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalatzen"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Kalkulatzen"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Geratzen den denbora "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Itxaron, instalazioa prestatzen"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketeak"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketea instalatzen"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Onartu"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Ezetsi"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Aldatu CDROMa!\n"
-"\n"
-"Sartu \"%s\" etiketa duen CDROMa unitatean eta sakatu Ados.\n"
-"Ez baduzu, sakatu Utzi instalazioa CDROM horretatik egin ez dezan."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Jarraitu hala ere?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Errore bat izan da paketeak ordenatzean:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Errore bat izan da paketeak instalatzean:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Abisua\n"
-"\n"
-"Irakurri arretaz ondorengo baldintzak. Zerbaitekin ados ez bazaude,\n"
-"ez duzu hurrengo CDa instalatzeko baimenik. Sakatu 'Ezetsi' \n"
-"instalazioa euskarri horiek erabili gabe jarraitzeko.\n"
-"\n"
-"\n"
-"Hurrengo CDko osagai batzuk ez dira GPL Lizentziaren edo\n"
-"antzeko akordioen araberakoak. Osagai horietako bakoitza\n"
-"bere lizentzia zehatzaren baldintzen araberakoa da. \n"
-"Irakurri arretaz lizentzia horiek eta bete bertako baldintzak osagai \n"
-"horiek erabili edo birbanatu aurretik. \n"
-"Lizentzia horiek oro har osagaia transferitzea, bikoiztea (babeskopiak\n"
-"egiteko izan ezik), birbanatzea, ingeniaritza alderantzikatzea, \n"
-"desmihiztatzea, deskonpilatzea edo aldatzea eragotziko dute. \n"
-"Kontratua ez betetzeak lizentzia zehatzak ematen dituen eskubide guztiak \n"
-"kentzea ekarriko du berehala. Baldin eta lizentzia zehatzaren baldintzek "
-"eskubidea ematen\n"
-"ez badizute, normalki ezin izango dituzu programak sistema batean baino\n"
-"gehiagotan instalatu, edo sarean erabiltzeko egokitu. Zalantzarik baduzu, "
-"jarri harremanetan\n"
-"osagaiaren banatzailearekin edo editorearekin zuzenean. \n"
-"Osagai horiek hirugarrenei transferitzea edo kopiatzea, dokumentazioa\n"
-"barne, debekatuta egoten da normalki.\n"
-"\n"
-"\n"
-"Hurrengo CDko osagaiei dagozkien eskubide guztiak haien egileenak \n"
-"dira eta software-programei aplikatzen zaizkien jabetza \n"
-"intelektualaren eta copyright-aren legeek babesten dituzte.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Errore bat izan da"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Ziur zaude instalazioa bertan behera utzi nahi duzula?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lizentzia-kontratua"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Sarrera\n"
-"\n"
-"Mandrake Linux banaketako sistema eragileari eta erabilgarri dauden osagaiei "
-"\"Software-produktuak\"\n"
-"deituko zaie aurrerantzean. Software-produktuetan sartzen dira, besteak \n"
-"beste, Mandrake Linux banaketako sistema eragileari eta osagaiei dagozkien "
-"programak, \n"
-"metodoak, arauak eta dokumentazioa.\n"
-"\n"
-"\n"
-"1. Lizentzia-kontratua\n"
-"\n"
-"Irakurri arretaz dokumentu hau. Dokumentu hau zure eta MandrakeSoft S.A.ren "
-"arteko lizentzia-kontratu bat da,\n"
-"Software-produktuei dagokiena.\n"
-"Software-produktuak instalatu, bikoiztu edo era batean edo bestean erabiliz, "
-"esplizituki \n"
-"onartzen dituzu eta erabateko adostasuna adierazten diezu Lizentzia honen "
-"baldintzei. \n"
-"Lizentziaren zatiren batekin ados ez bazaude, ez duzu baimenik izango "
-"Software-produktuak instalatu, \n"
-"bikoiztu edo erabiltzeko. \n"
-"Software-produktuak Lizentzia honekin bat ez datorren moduan instalatu, "
-"bikoiztu edo erabiltzeko \n"
-"saio oro deuseza izango da eta Lizentziari dagozkion eskubideak amaitu "
-"egingo \n"
-"dira. Lizentzia amaitzean, Software-produktuen kopia guztiak berehala "
-"suntsitu \n"
-"behar dituzu.\n"
-"\n"
-"\n"
-"2. Berme mugatua\n"
-"\n"
-"Software-produktuak eta erantsitako dokumentuak \"dauden-daudenean\" ematen "
-"dira, bermerik gabe, \n"
-"legeak onartzen duen neurrian.\n"
-"MandrakeSoft S.A.k ez du, ezein kasutan eta legeak onartzen duen neurrian, "
-"erantzukizunik izango\n"
-"Software-produktuen erabileraren edo erabiltzeko ezgaitasunaren ondorioz "
-"sortutako kalte berezi, ustekabeko,\n"
-"zuzeneko edo zeharkakoengatik (lana galtzea, lana etetea, finantza-galera, "
-"epai baten ondorioz ordaindu \n"
-"beharreko kuotak eta zigorrak edo beste edozein ondoriozko galera barne, "
-"mugarik gabe), \n"
-"MandrakeSoft S.A. jakinaren gainean egon arren halako kalteak gerta "
-"litezkeela.\n"
-"\n"
-"HERRIALDE BATZUETAN SOFTWARE DEBEKATUA EDUKITZEARI EDO ERABILTZEARI LOTUTAKO "
-"ERANTZUKIZUN MUGATUA\n"
-"\n"
-"Legeak onartzen duen neurrian, MandrakeSoft S.A.k edo bere banatzaileek, ez "
-"dute, ezein kasutan,\n"
-"erantzukizunik izango herrialde batzuetan, bertako legeek debekatutako edo "
-"mugatutako software-osagaiak edo\n"
-"Mandrake Linux-en guneetatik deskargatutako software-osagaiak eduki eta "
-"erabiltzearen ondorioz \n"
-"sortutako kalte berezi,ustekabeko,zuzeneko edo zeharkakoengatik (lana "
-"galtzea, lana etetea,\n"
-"finantza-galera, epai baten ondorioz ordaindu beharreko kuotak eta zigorrak "
-"edo beste edozein ondoriozko \n"
-"galera barne, mugarik gabe).\n"
-"Erantzukizun mugatu hau Software-produktuetan sartzen diren kriptografia "
-"handiko osagaiei aplikatzen \n"
-"zaie, baina ez da horietara mugatzen.\n"
-"\n"
-"\n"
-"3. GPL Lizentzia eta Lizentzia erlazionatuak\n"
-"\n"
-"Software-produktuak hainbat pertsonak edo erakundek sortutako osagaiak dira. "
-"Osagai \n"
-"horietako gehienak aurrerantzean\"GPL\" deituko diogun GNU Lizentzia Publiko "
-"Orokorraren\n"
-"edo antzeko lizentzien baldintzen araberakoak dira. Lizentzia horietako "
-"gehienek, \n"
-"beren osagaiak bikoizteko, egokitzeko edo birbanatzeko aukera ematen dute. "
-"Osagai bat erabili aurretik, irakurri \n"
-"arretaz osagai horren lizentzia-kontratuko baldintzak. Osagaiaren "
-"lizentziari\n"
-"buruzko galdera oro osagaiaren egileari egin beharko zaio, eta ez "
-"MandrakeSoft-i.\n"
-"MandrakeSoft S.A.k garatutako programak GPL Lizentziaren araberakoak dira. "
-"MandrakeSoft S.A.k\n"
-"idatzitako dokumentazioa lizentzia zehatz baten araberakoa da. Xehetasun "
-"gehiago nahi izanez gero, \n"
-"jo dokumentaziora.\n"
-"\n"
-"\n"
-"4. Jabetza intelektualaren eskubideak\n"
-"\n"
-"Software-produktuen osagaiei dagozkien eskubide guztiak haien \n"
-"egileenak dira eta software-programei\n"
-"aplikatzen zaizkien jabetza intelektualaren eta copyriht-aren legeek "
-"babesten dituzte.\n"
-"MandrakeSoft S.A.k eskubidea du Software-produktuak bere osotasunean edo "
-"zatika aldatzeko, \n"
-"bide guztiak erabiliz eta helburu guztietarako.\n"
-"\"Mandrake\", \"Mandrake Linux\" eta asoziatutako logotipoak MandrakeSoft S."
-"A.ren marka erregistratuak dira \n"
-"\n"
-"\n"
-"5. Lege arautzaileak \n"
-"\n"
-"Kontratu honen edozein zati epai batek deuseztzat, legez kanpokotzat edo "
-"aplikaezintzat jotzen badu, \n"
-"zati hori kendu egingo da kontratutik. Kontratuaren gainerako atal "
-"aplikagarriek ezarritakoa \n"
-"bete behar duzu.\n"
-"Lizentzia honetako baldintzak Frantziako legeen araberakoak dira.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teklatua"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Aukeratu zure teklatu-diseinua."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Hona hemen teklatu erabilgarri guztien zerrenda"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Zein instalazio-klase nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalatu/Eguneratu"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Zer egin nahi duzu: instalazioa ala eguneratzea?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Gomendatua"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Aditua"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Bertsio-berritu"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Paketeak bakarrik bertsio-berritu"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Aukeratu sagu-mota."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Sagu-ataka"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Aukeratu sagua konektatuta dagoen serieko ataka."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Botoien emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "2. botoiaren emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "3. botoiaren emulazioa"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA txartelak konfiguratzen..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "IDE konfiguratzen"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ez dago partizio erabilgarririk"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Partizioak eskaneatzen muntatze-puntuak aurkitzeko"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Aukeratu muntatze-puntuak"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ezin dut zure partizio-taula irakurri, hondatuegia dago :(\n"
-"Jarraitzen saia naiteke, partizio txarrak garbituz (DATU GUZTIAK galduko "
-"dira!).\n"
-"Beste irtenbidea DrakXri partizio-taula aldatzeko baimenik ez ematea da.\n"
-"(errorea %s da)\n"
-"\n"
-"Ados zaude partizio guztiak galtzearekin?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake-k ezin izan du partizio-taula behar bezala irakurri.\n"
-"Jarraitu zure ardurapean!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Ez dago lekurik 1 MBko bootstrap-a sortzeko! Instalazioak jarraituko du, "
-"baina zure sistema abiarazteko, bootstrap partizioa sortu beharko duzu "
-"DiskDrake-rekin"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Ez da erroko partiziorik aurkitu bertsio-berritzea egiteko"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Erroko partizioa"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Zein da zure sistemaren (/) erroko partizioa?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Berrabiarazi egin behar duzu partizio-taulako aldaketek eragina izateko"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Aukeratu formateatu nahi dituzun partizioak"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Bloke txarrak egiaztatu?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Partizioak formateatzen"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s fitxategia sortzen eta formateatzen"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Ez dago nahikoa swap instalazioa burutzeko, gehitu egin beharko duzu"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Pakete erabilgarriak bilatzen"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Bertsio-berritzeko paketeak bilatzen"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Zure sistemak ez du nahikoa leku instalatzeko edo bertsio-berritzeko (%d > %"
-"d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Osoa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Gutxienekoa (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Gomendatua (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Aukeratu pakete-hautapena disketean kargatzea edo gordetzea.\n"
-"Formatua instalazio automatikoa egiteko sortutako disketeena bezalakoa da."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Disketetik kargatu"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Disketetik kargatzen"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakete-hautapena"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Sartu pakete-hautapena daukan diskete bat"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Gorde disketean"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Hautatutako tamaina handiagoa da leku erabilgarria baino"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Instalazio-mota"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Ez duzu talde edo paketerik hautatuta\n"
-"Nahi duzun gutxieneko instalazioa hautatu behar duzu"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Xrekin"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Oinarrizko dokumentazioarekin (gomendatua)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instalazio minimo-minimoa (batez ere, urpmi gabe)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Beheko zerrendako CD guztiak badituzu, sakatu Ados.\n"
-"CD horietako bat ere ez baduzu, sakatu Utzi.\n"
-"CDetako batzuk soilik falta badituzu, desauta itzazu, eta sakatu Ados."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" etiketadun CDROMa"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Instalazioa prestatzen"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketea instalatzen\n"
-"%% %d"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Instalazio-ondorengo konfigurazioa"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sartu abioko disketea %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sartu moduluak eguneratzeko disketea %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Enkriptatzeko softwarea deskargatzeko aukera duzu orain.\n"
-"\n"
-"ABISUA:\n"
-"\n"
-"Software horiei aplika dakizkiekeen eta hainbat jurisdikziok ezartzen "
-"dituzten eskakizun \n"
-"orokor desberdinak direla eta, software horien bezeroek edo/eta azken "
-"erabiltzaileek \n"
-"segurtatu beharko dute beren jurisdikzioko legeek baimena ematen dutela "
-"softwareok \n"
-"deskargatzeko, biltegiratzeko edo/eta erabiltzeko.\n"
-"\n"
-"Gainera, bezeroek edo/eta azken erabiltzaileek bereziki arduratu behar dute "
-"beren\n"
-"jurisdikzioko legeak ez urratzeaz. Bezeroek edo/eta azken erabiltzaileek\n"
-"lege aplikagarri horiek xedatutakoa betetzen ez badute, zigor handiak "
-"jasoko\n"
-"dituzte.\n"
-"\n"
-"Ezein kasutan, Mandrakesoft-ek eta bere fabrikatzaileek edo/eta banatzaileek "
-"ez dute\n"
-"erantzukizunik izango bezeroak edo/eta azken erabiltzaileak kontratu hau\n"
-"sinatu ondoren eskuratutako softwareak erabiltzearen, edukitzearen edo \n"
-"deskargatze hutsaren ondorioz sortutako kalte berezi, zeharkako edo "
-"ustekabekoengatik \n"
-"(hala nola, irabaziak galtzea, lana etetea, datu komertzialak galtzea\n"
-"eta bestelako diru-galerak eta epai baten erabakiari jarraiki ordaindu\n"
-"beharreko erantzukizunak eta kalte-ordainak, besteak beste).\n"
-"\n"
-"\n"
-"Kontratu honi buruzko edozein kontsulta egiteko, jarri harremanetan\n"
-"Mandrakesoft, Inc.-ekin\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Banaketa erabilgarri izan ondoren kaleratutako pakete eguneratuak\n"
-"deskargatzeko aukera duzu.\n"
-"\n"
-"Segurtasun eta akatsen konponketak hartuko dituzu, baina Interneteko\n"
-"konexio bat behar duzu konfiguratuta, aurrera jarraitzeko.\n"
-"\n"
-"Eguneratze horiek instalatu nahi dituzu?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Mandrake Linux-en web gunearekin kontaktatzen ispiluen zerrenda lortzeko"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Aukeratu ispilu bat paketeak bertatik hartzeko"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Ispiluarekin kontaktatzen pakete erabilgarrien zerrenda lortzeko"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Zein da zure ordu-zona?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarearen ordua GMTn ezarria"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Ordu-sinkronizazio automatikoa (NTP erabiliz)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Urruneko CUPS zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Inprimagailurik ez"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "ISA soinu-txartela duzu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Instalazioa egindakoan, exekutatu \"sndconfig\" soinu-txartela "
-"konfiguratzeko "
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Ez da soinu-txartelik detektatu. Instalazioa egin ondoren, saiatu \"harddrake"
-"\"rekin "
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Laburpena"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Sagua"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Ordu-zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Inprimagailua"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN txartela"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Soinu-txartela"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Telebista-txartela"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Fitxategi lokalak"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ezarri root-aren pasahitza"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Pasahitzik ez"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Pasahitz hau sinpleegia da (gutxienez %d karaktere izan behar ditu)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP basea dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Autentifikazioa"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domeinua"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS zerbitzaria"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
-"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman SILO\n"
-"instalatu nahi ez baduzu, edo beste sistema eragile batek SILO kentzen badu, "
-"edo SILOk\n"
-"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
-"pertsonalizatua Mandrake\n"
-"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
-"larriak\n"
-"errazago gainditu ahal izateko.\n"
-"\n"
-"Zure sistemarako abioko disko bat sortu nahi baduzu, sartu diskete bat "
-"lehen\n"
-"unitatean eta sakatu \"Ados\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Lehen diskete-unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Bigarren diskete-unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Saltatu"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Abioko disko pertsonalizatuak Linux sistema abiarazteko aukera ematen du\n"
-"abioko kargatzaile normala erabili gabe. Baliagarria da zure sisteman LILO "
-"(edo grub)\n"
-"instalatu nahi ez baduzu, edo beste sistema eragile batek LILO kentzen badu, "
-"edo LILOk\n"
-"zure hardware-konfigurazioarekin funtzionatzen ez badu. Abioko disko "
-"pertsonalizatua Mandrake\n"
-"berreskuratzeko imajinarekin ere erabil daiteke, sistemaren hutsegite "
-"larriak\n"
-"errazago gainditu ahal izateko.\n"
-"Zure sistemarako abioko disko bat sortu nahi duzu?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(KONTUZ! XFS erabiltzen ari zara erroko partizioan,\n"
-"abioko diskoa 1,44 Mb-ko disketean sortzeak huts egingo du\n"
-"seguru asko, XFSk oso kontrolatzaile handia behar duelako)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Ez dago diskete-unitate erabilgarririk"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Aukeratu abioko diskoa egiteko erabili nahi duzun diskete-unitatea"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sartu diskete bat %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Abioko disketea sortzen"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Abioko kargatzailea prestatzen"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Badirudi makina zaharra edo ezezaguna duzula,\n"
-"yaboot abioko kargatzaileak ez du funtzionatuko.\n"
-"Instalazioak jarraitu egingo du, baina\n"
-"BootX erabili beharko duzu makina abiarazteko"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "aboot erabili nahi duzu?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Errorea aboot instalatzean, \n"
-"instalazioa ezartzen saiatu lehen partizioa suntsitzen badu ere?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Abioko kargatzailea instalatzen"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Abioko kargatzailea instalatzeak huts egin du. Errore hau gertatu da:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Baliteke Open Firmware abioko gailua aldatu behar izatea\n"
-" abioko kargatzailea gaitzeko. Berrabiaraztean abioko kargatzailearen "
-"gonbita ez\n"
-" baduzu ikusten, eduki sakatuta Command-Option-O-F abiaraztean eta sartu:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Gero, idatzi: shut-down\n"
-"Hurrengo abiaraztean abioko kargatzailearen gonbita ikusi behar duzu."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sartu diskete huts bat %s unitatean"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Auto-instalazioko disketea sortzen"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Urrats batzuk ez dira osatu.\n"
-"\n"
-"Ziur zaude orain irten nahi duzula?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Zorionak, instalazioa burutu da.\n"
-"Atera abioko diskoa eta sakatu itzulera-tekla berrabiarazteko.\n"
-"\n"
-"\n"
-"Mandrake Linux-en bertsio honetarako erabilgarri dauden konponbideen "
-"informaziorako,\n"
-"kontsultatu Erratak helbide honetan:\n"
-"\n"
-"\n"
-"http://www.mandrakelinux.com/.\n"
-"\n"
-"\n"
-"Zure sistema konfiguratzeko informazioa Mandrake-ren Erabiltzailearen \n"
-"Gida Ofizialeko instalatu ondorengo azalpenei buruzko kapituluan duzu."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Sortu auto-instalazioko disketea"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto-instalazioa erabat automatiza daiteke nahi izanez gero,\n"
-"kasu horretan, disko gogorra hartuko du!!\n"
-"(beste makina batean instalatzeko pentsatua da aukera hau).\n"
-"\n"
-"Beharbada nahiago izango duzu instalazioa errepikatzea.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizatua"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Errepikatu"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Gorde pakete-hautapena"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux-en %s instalazioa"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> elementuz aldatzeko | <Zuriunea> hautatzeko | <F12> hurr. "
-"pantaila"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu falta da"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "consolehelper falta da"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Aukeratu fitxategi bat"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Aurreratua"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Oinarrizkoa"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Itxaron"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Informazioa"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Zabaldu zuhaitza"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Tolestu zuhaitza"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Txandakatu alfabetikoaren eta taldeka ordenatuaren artean"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Aukera okerra, saiatu berriro\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Zure aukera? (%s lehenetsia) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Zuk bete beharreko sarrerak:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Zure aukera? (0/1, lehenetsia `%s' da) "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "`%s' botoia : %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Botoi honetan klik egin nahi duzu?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Zure aukera? (lehenetsia: `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hainbat gauza dituzu aukeran (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Aukeratu editatu nahi duzun 10 barrutiko lehen zenbakia,\n"
-"edo sakatu Sartu, jarraitzeko.\n"
-"Zure aukera? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Kontuz, etiketa bat aldatu da:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Berriro bidali"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "txekiarra (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "alemana"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "espainiarra"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "finlandiarra"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "frantsesa"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norvegiarra"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "poloniarra"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "errusiarra"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "suediarra"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Erresuma Batuko teklatua"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Estatu Batuetako teklatua"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "albaniarra"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "armeniarra (zaharra)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "armeniarra (idazmakina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "armeniarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerbaijandarra (latinoa)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belgikarra"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "bulgariarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "bulgariarra (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "brasildarra (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "bielorrusiarra"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "suitzarra (diseinu alemana)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "suitzarra (diseinu frantsesa)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "txekiarra (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "alemana (letra zaharkiturik ez)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "daniarra"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (Estatu Batuak)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (norvegiarra)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (suediarra)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "estoniarra"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "georgiarra (diseinu \"errusiarra\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "georgiarra (diseinu \"latinoa\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "grekoa"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "hungariarra"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "kroaziarra"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "israeldarra"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "israeldarra (fonetikoa)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "iraniarra"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "islandiarra"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "italiarra"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "japoniarra 106 tekla"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Koreako teklatua"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latinamerikarra"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituaniako AZERTY (zaharra)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituaniako AZERTY (berria)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituaniako QWERTY \"ilara numerikoa\""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituaniako QWERTY \"fonetikoa\""
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "letoniarra"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "mazedoniarra"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "holandarra"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "poloniarra (qwerty diseinua)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "poloniarra (qwertz diseinua)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portugesa"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "kanadarra (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "errumaniarra (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "errumaniarra (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "errusiarra (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "esloveniarra"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "eslovakiarra (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "eslovakiarra (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "serbiarra (zirilikoa)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "tamila"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thailandiako teklatua"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajikistango teklatua"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "turkiarra (tradizionala \"F\" modeloa)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "turkiarra (modernoa \"Q\" modeloa)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukrainarra"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Estatu Batuetako teklatua (nazioartekoa)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "vietnamdarra QWERTY \"ilara numerikoa\""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "jugoslaviarra (latinoa)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Eskuineko Alt tekla"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Bi Maius teklak batera"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol eta Maius teklak batera"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "BlokMaius tekla"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ktrl eta Alt teklak batera"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt eta Maius teklak batera"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "\"Menu\" tekla"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Ezkerreko \"Windows\" tekla"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Eskuineko \"Windows\" tekla"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "%s muntaketa zirkularrak\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Kendu bolumen logikoak lehendabizi\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA euskarririk ez dago 2.2 nukleoentzat. Erabili 2.4 nukleoa."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Sagua"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Gurpildun PS2 sagu generikoa"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking sagua"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botoi"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "2 botoiko sagu generikoa"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generikoa"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Gurpila"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "seriekoa"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "3 botoiko sagu generikoa"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech sagua (seriekoa, C7 mota zaharrekoa)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "bus-sagua"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botoi"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botoi"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "bat ere ez"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Sagurik gabe"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Probatu sagua"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Sagua aktibatzeko,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "MUGITU GURPILA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Amaitu"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Hurrengoa ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Aurrekoa"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Zuzena da?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Konektatu Internetekin"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"adsl-rekin konektatzeko modurik ohikoena pppoe da.\n"
-"Konexio batzuek pptp erabiltzen dute, bakan batzuek dhcp.\n"
-"Ez badakizu, aukeratu 'erabili pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "erabili dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "erabili pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "erabili pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Zein dhcp bezero erabili nahi duzu?\n"
-"Lehenetsia dhcpcd da"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Zure sisteman ez da ethernet sare-moldagailurik detektatu.\n"
-"Ezin dut konexio-mota hau konfiguratu."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Aukeratu sare-interfazea"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Aukeratu zein sare-moldagailu erabili nahi duzun Internetera konektatzeko"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ez da sare-txartelik aurkitu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Sarea konfiguratzen"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Sartu zure ostalari-izena, baldin badakizu.\n"
-"DHCP zerbitzari batzuek ostalari-izena behar dute funtzionatzeko.\n"
-"Ostalari-izenak osoa izan behar du, erabat kualifikatua,\n"
-"esate baterako, ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ostalari-izena"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Sarea konfiguratzeko morroia"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Kanpoko ISDN modema"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Barneko ISDN txartela"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Nolakoa da zure ISDN konexioa?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Zein ISDN konfigurazio duzu nahiago?\n"
-"\n"
-"* Konfigurazio zaharrak isdn4net erabiltzen du. Tresna ahaltsuak\n"
-" dauzka, baina korapilatsua da konfiguratzeko, eta ez da estandarra.\n"
-"\n"
-"* Konfigurazio berria errazagoa da ulertzeko, estandarragoa,\n"
-" baina tresna gutxiago ditu.\n"
-"\n"
-"Konfigurazio erraza gomendatzen dugu.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Konfigurazio berria (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Konfigurazio zaharra (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN konfigurazioa"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Hautatu hornitzailea.\n"
-" Zerrendan ez badago, aukeratu Zerrendatu gabe"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europako protokoloa"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europako protokoloa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Munduko gainerako protokoloa"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Munduko gainerako protokoloa \n"
-" D kanalik ez (linea alokatuak)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Zein protokolo erabili nahi duzu?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Nolako txartela duzu?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ez dakit"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"ISA txartela baduzu, hurrengo pantailako balioek zuzenak izan behar dute.\n"
-"\n"
-"PCMCIA txartela baduzu, txartelaren irq eta io jakin behar dituzu.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortatu"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Jarraitu"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Zein da zure ISDN txartela?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"ISDN PCI txartel bat detektatu dut, baina ez dakit zein motatakoa den. "
-"Hautatu PCI txartel bat hurrengo pantailan."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Ez da ISDN PCI txartelik aurkitu. Hautatu bat hurrengo pantailan."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Aukeratu modema konektatuta dagoen serieko ataka."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Telefonoz deitzeko aukerak"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Konexio-izena"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefono-zenbakia"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Saio-hasierako ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-ean oinarritua"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminalean oinarritua"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Domeinu-izena:"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Lehen DNS zerbitzaria (aukerakoa)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Bigarren DNS zerbitzaria (aukerakoa)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Deskonektatu egin zaitezke edo konexioa birkonfiguratu."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Konexioa birkonfigura dezakezu."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Orain Internetekin konektatuta zaude."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Internetekin konekta zaitezke, edo konexioa birkonfiguratu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Orain ez zaude Internetekin konektatuta."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Konektatu"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Deskonektatu"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Konfiguratu konexioa"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Interneteko konexioa eta konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "%s konexioa konfiguratuko dugu orain."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"%s konexioa konfiguratuko dugu orain.\n"
-"\n"
-"\n"
-"Jarraitzeko, sakatu Ados."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Sare-konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Sare-instalazioa egiten ari zarenez, zure sarea konfiguratuta dago jadanik.\n"
-"Hautatu Ados zure konfigurazioa mantentzeko, edo hautatu Utzi Internet eta "
-"Sare-konexioa birkonfiguratzeko.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Ongi etorri Sarea konfiguratzeko morroira\n"
-"\n"
-"Zure Internet/sare-konexioa konfiguratzera goaz.\n"
-"Ez baduzu auto-detekzioa erabili nahi, desautatu kontrol-laukia.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Aukeratu konfiguratzeko profila"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Erabili auto-detekzioa"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Gailuak detektatzen..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Modem-konexio normala"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "%s atakan detektatua"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN konexioa"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "%s detektatua"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL konexioa"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "%s interfazean detektatua"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kable-konexioa"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "kable bidezko konexioa detektatu da"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Sare lokaleko konexioa (LAN)"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet txartela(k) detektatuta"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Aukeratu konfiguratu nahi duzun konexioa"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Internetera konektatzeko modu bat baino gehiago konfiguratu duzu.\n"
-"Aukeratu erabili nahi duzuna.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Interneteko konexioa"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Abioan hasi nahi duzu konexioa?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Sare-konfigurazioa"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Sarea berrabiarazi egin behar da"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Arazo bat izan da sarea berrabiaraztean: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Zorionak, sarearen eta Interneten konfigurazioa amaitu da.\n"
-"\n"
-"Konfigurazioa zure sistemari aplikatuko zaio orain.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Ondoren, zure X ingurunea berrabiaraztea gomendatzen dugu,\n"
-"ostalari-izena aldatzearen arazoa saihesteko."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Arazoak izan dira konfigurazioan zehar.\n"
-"Probatu konexioa net_monitor edo mcc bidez. Konexioak funtzionatzen ez badu, "
-"konfigurazioa berrabiarazi beharko duzu"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ABISUA: Gailu hau Internetera konektatzeko konfiguratu da aldez aurretik.\n"
-"Gailu hau konfiguratuta mantentzeko, onartu, besterik gabe.\n"
-"Ondoko eremuak aldatzen badituzu konfigurazio hau gainidatziko da."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Sartu makina honen IP konfigurazioa.\n"
-"Elementu bakoitza IP helbide gisa sartu behar da puntuz\n"
-"bereizitako zenbakizko notazioan (adibidez, 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Sareko %s gailua konfiguratzen"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (%s kontrolatzailea)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP helbidea"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Sare-maskara"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automatikoa"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP helbideak 1.2.3.4 formatua izan behar du"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Sartu zure ostalari-izena.\n"
-"Ostalari-izenak osoa izan behar du, erabat kualifikatua,\n"
-"esate baterako, ``mybox.mylab.myco.com''.\n"
-"Atebidearen IP helbidea ere sar dezakezu, baldin baduzu"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS zerbitzaria"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Atebidea (adib. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Atebide-gailua"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxy-en konfigurazioa"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy-a"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy-a"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Sare-txartelaren identifikazioa (eramangarrientzat baliagarria)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy-ak http://... izan behar du"
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy-ak ftp://... izan behar du"
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Interneteko konfigurazioa"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Internetera orain konektatu nahi duzu?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Konexioa probatzen..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sistema Internetera konektatuta dago orain."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Segurtasun-arrazoiengatik, deskonektatu egingo da orain."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Badirudi sistema ez dagoela Internetera konektatuta.\n"
-"Saiatu konexioa birkonfiguratzen."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Konexioaren konfigurazioa"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Bete edo egiaztatu ondoko eremua"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Txartelaren IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Txartelaren mem (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Txartelaren S/I"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Txartelaren S/I_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Txartelaren S/I_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Zure telefono-zenbakia"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Hornitzailearen izena (adib. hornitzailea.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Hornitzailearen telefono-zenbakia"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Hornitzailearen dns 1 (aukerakoa)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Hornitzailearen dns 2 (aukerakoa)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Aukeratu zure herrialdea edo estatua"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Markatzeko modua"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Konexioaren abiadura"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Konexioaren denbora-muga (segundotan)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Kontuaren identifikatzailea (erabiltzaile-izena)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Kontuaren pasahitza"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "muntatzeak huts egin du: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Partizio hedatua ez da plataforma honetan onartzen"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Hutsune bat duzu partizio-taulan baina ezin dut erabili.\n"
-"Irtenbide bakarra lehen mailako partizioak mugitzea da, hutsunea partizio "
-"hedatuen ondoren gera dadin"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Huts egin du %s fitxategitik leheneratzean: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Babeskopia txarra"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Errorea %s fitxategian idaztean"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Okerren bat gertatzen ari da zure unitatean. \n"
-"Datuen osotasuna egiaztatzeko probak huts egin du. \n"
-"Horrek esan nahi du, diskoan ezer idazten bada, zaborra sortuko dela ausaz"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "ezinbestekoa"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "garrantzitsua"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "oso baliagarria"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "baliagarria"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "beharbada"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Belaunaldi berrikoa"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue (Inprimatu, ez egon ilaran)"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Inprimagailu lokala"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Urruneko inprimagailua"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Urruneko CUPS zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Urruneko lpd zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Sareko inprimagailua (TCP/socket-a)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "NetWare zerbitzariko inprimagailua"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Adierazi inprimagailuaren URI bat"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Kanalizatu lana komando batean"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modelo ezezaguna"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Inprimagailu lokalak"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Urruneko inprimagailuak"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " - \\/*%s ataka paraleloan"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", \\/*%s USB inprimagailua"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", funtzio anitzeko gailua \\/*%s ataka paraleloan"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", funtzio anitzeko gailua - USB"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", funtzio anitzeko gailua - HP JetDirect"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", funtzio anitzeko gailua"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", %s(e)n inprimatzean"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr " - \"%s\" LPD zerbitzaria, \"%s\" inprimagailua"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", \"%s\" TCP/IP ostalaria, %s ataka"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr " - \"%s\" Windows zerbitzaria, \"%s\" konpartitzea"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr " - \"%s\" Novell zerbitzaria, \"%s\" inprimagailua"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", %s komandoaren bidez"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Inprimagailu gordina (kontrolatzailerik ez)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(makina honetan)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "\"%s\" CUPS zerbitzarian"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (lehenetsia)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Hautatu inprimagailu-konexioa"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Nola dago konektatuta inprimagailua?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Urruneko CUPS zerbitzariko inprimagailuak ez dituzu hemen konfiguratu behar; "
-"horrelako inprimagailuak automatikoki detektatuko dira."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "CUPSen konfigurazioa"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Zehaztu CUPS zerbitzaria"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Sare lokaleko urruneko CUPS zerbitzarietarako sarbidea izateko, ez daukazu "
-"ezer konfiguratu beharrik; CUPS zerbitzariek automatikoki emango diote zure "
-"makinari beren inprimagailuen berri. Zure makinak ezagutzen dituen "
-"inprimagailu guztiak Printerdrake-ren leiho nagusiko \"Urruneko "
-"inprimagailuak\" ataleko zerrendan daude. CUPS zerbitzaria zure sarelokalean "
-"ez badago, CUPS zerbitzariaren IP helbidea eman behar duzu, eta nahi baduzu "
-"atakaren zenbakia, zerbitzaritik inprimagailuaren informazioa eskuratzeko; "
-"bestela, utzi eremu hauek hutsik."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalean, CUPS automatikoki konfiguratzen da sare-ingurunearen\n"
-"arabera, sare lokaleko CUPS zerbitzarietako inprimagailuetara\n"
-"iritsi ahal izan zaitezen. Horrek ez badu ondo funtzionatzen, \n"
-"desaktibatu \"CUPS konfigurazio automatikoa\" eta editatu\n"
-"/etc/cups/cupsd.conf fitxategia eskuz. Ez ahaztu gero CUPS\n"
-"berrabiaraztea (komandoa: \"service cups restart\")."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP helbideak honelako itxura izan behar du: 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Ataka-zenbakiak osoko zenbakia izan behar du!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS zerbitzariaren IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Ataka"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "CUPS konfigurazio automatikoa"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Gailuak detektatzen..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Probatu atakak"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Gehitu inprimagailu berria"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Ongi etorri inprimagailua instalatzeko morroira\n"
-"\n"
-"Morroi honen bidez, ordenagailuan erabil daitezkeen inprimagailu urruneko "
-"edo lokalak instalatzeko laguntza jasoko duzu, baita saretik instalatzeko "
-"ere.\n"
-"\n"
-"Inprimagailua instalatzeko behar duen informazioa eskatuko dizu eta "
-"inprimagailu-kontrolatzaile, kontrolatzaile-aukera eta konexio-mota "
-"erabilgarri guztiak jarriko ditu zure esku."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Inprimagailu lokala"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Ongi etorri inprimagailuak instalatzeko morroira\n"
-"\n"
-"Morroi honen bidez, ordenagailuarekin konektatutako inprimagailuak "
-"instalatzeko laguntza jasoko duzu.\n"
-"\n"
-"Konektatu inprimagailua ordenagailuarekin eta piztu ezazu. Aurrera "
-"jarraitzeko, egin klik \"Hurrengoa\"n, eta instalazioa bertan behera uzteko "
-"egin klik \"Utzi\"n .\n"
-"\n"
-"Ordenagailu batzuk kraskatu egin daitezke inprimagailuen auto-detekzioan, "
-"desaktibatu \"Automatikoki detektatu inprimagailuak\", auto-detekzioa ez "
-"erabiltzeko. Erabili \"Aditu modua\" PrinterDrake-n, urruneko inprimagailu "
-"batean inprimatzea konfiguratu nahi baduzu eta zerrendan agertzen ez bada."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Automatikoki detektatu inprimagailuak"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Zorionak, inprimagailua instalatuta eta konfiguratuta duzu!\n"
-"\n"
-"Inprimatzeko, aplikazioko \"Inprimatu\" komandoa erabil dezakezu (normalean "
-"\"Fitxategia\" menuan izan ohi da).\n"
-"\n"
-"Inprimagailu bat gehitu, kendu, edo izenez aldatu nahi baduzu, edo ezarpen "
-"lehenetsiak (paper-iturria, inprimatze-kalitatea...) aldatu nahi badituzu, "
-"hautatu \"Inprimagailua\" Mandrake Kontrol Zentroko \"Hardwarea\" atalean."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Inprimagailuen detekzio automatikoa"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake-k lokalki konektatutako paraleloko edo USB inprimagailuak "
-"detekta ditzake automatikoki, baina sistema batzuetan auto-detekzioak "
-"BLOKEATU ETA HONDATU EGIN DITZAKE FITXATEGI-SISTEMAK! Beraz, ZUREA DA "
-"ARRISKUAREN ARDURA!\n"
-"\n"
-"Inprimagailuak automatikoki detektatu nahi dituzu?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Egin auto-detekzioa"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Ezarri inprimagailua eskuz"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "%s detektatua"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "\\/*%s ataka paraleloko inprimagailua"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "\\/*%s USB inprimagailua"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ez da inprimagailu lokalik aurkitu! Inprimagailua eskuz instalatzeko, idatzi/"
-"gailu/fitxategi izena (Ataka paraleloak: /dev/lp0, /dev/lp1, ..., "
-"baliokideak dira LPT1:, LPT2:..., lehen USB inprimagailua: /dev/usb/lp0, "
-"bigarren USB inprimagailua: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Gailua edo fitxategi-izena adierazi behar duzu!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Ez da inprimagailu lokalik aurkitu!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Sareko inprimagailuak soilik instalazioaren ondoren instala daitezke. "
-"Hautatu \"Hardwarea\" eta gero \"Inprimagailuak\" Mandrake Kontrol Zentroan."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Sareko inprimagailuak inprimatzeko, hautatu \"Utzi\", hautatu \"Aditu modua"
-"\", eta egin klik \"Gehitu inprimagailu berria\" aukeran berriro."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Inprimagailu hau detektatu da automatikoki, zuk konfiguratu nahi duzuna ez "
-"bada, idatzi gailuaren izena/fitxategi-izena"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Automatikoki detektatutako inprimagailuen zerrenda da hau. Hautatu "
-"konfiguratu nahi duzuna edo idatzi gailuaren izena/fitxategi-izena"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"Inprimagailu hau detektatu da automatikoki. Inprimagailuaren konfigurazioa "
-"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
-"baduzu konfigurazio pertsonalizatua, aldatu \"Eskuzko konfigurazioa"
-"\"aukerara."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Automatikoki detektatutako inprimagailuen zerrenda da hau. Hautatu "
-"konfiguratu nahi duzuna. . Inprimagailuaren konfigurazioa zeharo "
-"automatikoki egingo da. Inprimagailua ondo detektatu ez bada edo nahiago "
-"baduzu konfigurazio pertsonalizatua, hautatu \"Eskuzko konfigurazioa\"."
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Hautatu inprimagailua konektatuta dagoen ataka edo idatzi gailuaren izena/"
-"fitxategi-izena"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Aukeratu inprimagailua konektatuta dagoen ataka."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Ataka paraleloak: /dev/lp0, /dev/lp1..., baliokideak dira LPT1:, LPT2:..., "
-"lehen USB inprimagailua: /dev/usb/lp0, 2. USB inprimagailua: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Inprimagailua/gailua aukeratu/adierazi behar duzu!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Eskuzko konfigurazioa"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Zure inprimagailua funtzio anitzeko HP gailua da (OfficeJet, PSC, "
-"PhotoSmart, LaserJet 1100/1200/1220/3200/3300 eskanerrarekin)?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "HPOJ paketea instalatzen..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Gailua egiaztatzen eta HPOJ konfiguratzen..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "SANE paketea instalatzen..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Funtzio anitzeko HP gailuan eskaneatzen"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Inprimagailu-ataka CUPSerako erabilgarri egiten..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Inprimagailuaren datu-basea irakurtzen..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Urruneko lpd inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Urruneko lpd inprimagailua erabiltzeko, inprimagailu-zerbitzariaren "
-"ostalari-\n"
-"izena eta zerbitzari horretako inprimagailu-izena eman behar dituzu."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Urruneko ostalari-izena"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Urruneko inprimagailu-izena"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Urruneko ostalari izena falta da!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Urruneko inprimagailu-izena falta da!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"SMB inprimagailuan inprimatzeko, SMB ostalari-izena eman behar duzu (Oharra! "
-"Baliteke TCP/IP ostalari-izena desberdina izatea!) eta beharbada inprimaketa-"
-"zerbitzariaren IP helbidea eta baita atzitu nahi duzun inprimagailuaren "
-"konpartitze-izena eta erabiltzaile-izenak, pasahitzak eta lantalde-"
-"informazioa ere."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB zerbitzariaren ostalaria"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB zerbitzariaren IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Konpartitze-izena"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Lantaldea"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Zerbitzari-izena edo zerbitzariaren IP eman behar da!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba konpartitze-izena falta da!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare inprimagailuan inprimatzeko, NetWare inprimaketa-zerbitzariaren "
-"izena eman behar duzu (Oharra! baliteke bere TCP/IP ostalari-izena "
-"desberdina izatea!) eta baita atzitu nahi duzun inprimagailuaren inprimaketa-"
-"ilararen izena eta erabiltzaile-izenak eta pasahitzak ere."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Inprimagailu-zerbitzaria"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Inprimaketa-ilararen izena"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP zerbitzari-izena falta da!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP ilara-izena falta da!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Socket inprimagailuan inprimatzeko, inprimagailuaren ostalari-izena\n"
-"eman behar duzu eta, nahi baduzu, ataka-zenbakia. HP JetDirect "
-"zerbitzarietan ataka-zenbakia normalki 9100 izaten da, beste zerbitzari "
-"batzuetan aldatu egin daiteke. Begiratu zure hardwarearen eskuliburuan."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Inprimagailuaren ostalari-izena"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Inprimagailuaren ostalari izena falta da!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Inprimagailuaren URIa"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Inprimagailua atzitzeko URIa zuzenean zehatz dezakezu. URIak CUPS edo "
-"Foomatic zehaztapenak bete behar ditu. Kontuan izan spooler guztiek ez "
-"dituztela URI mota guztiak onartzen."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Baliozko URI bat sartu behar da!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Inprimagailu bakoitzak izen bat behar du (adibidez \"inprimagailua\"). "
-"Azalpenaren eta Kokalekuaren eremuak ez dira nahitaez bete behar. "
-"Erabiltzaileentzako iruzkinak dira."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Inprimagailuaren izena"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Azalpena"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Kokalekua"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Inprimagailuaren datu-basea prestatzen..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Zure inprimagailu-modeloa"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake-k inprimagailua auto-detektatzean lortutako modelo-izena "
-"inprimagailuen datu-basean dituen modeloekin konparatu du, egokiena "
-"aurkitzeko. Aukera okerrekoa izan daiteke, batez ere zure inprimagailua ez "
-"bada azaltzen datu-baseko zerrendan. Beraz, begiratu aukera egokia den eta, "
-"hala bada, egin klik \"Modeloa zuzena da\"n, bestela, egin klik \"Hautatu "
-"modeloa eskuz\"en hurrengo pantailara joan eta modeloa eskuz hautatzeko.\n"
-"\n"
-"Hau aurkitu du Printerdrake-k zure inprimagailuarentzat:\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Modeloa zuzena da"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Hautatu modeloa eskuz"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Inprimagailu-modeloaren hautapena"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Zein inprimagailu-modelo daukazu?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Begiratu Printerdrake-k ondo detektatu duen automatikoki zure inprimagailu-"
-"modeloa. Bilatu modelo egokia zerrendan kurtsorea okerreko modeloan edo "
-"\"Inprimagailu gordinean\" badago."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Zure inprimagailua ez badago zerrendan, aukeratu bateragarria (ikus "
-"inprimagailuaren eskuliburua) edo antzekoa den bat "
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter-en konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"OKI laser winprinter inprimagailua konfiguratzen ari zara. Inprimagailu "
-"horiek oso komunikazio-protokolo berezia erabiltzen dute eta beraz "
-"paraleloko lehen atakara konektatuta soilik funtzionatzen dute. "
-"Inprimagailua beste ataka batera edo inprimaketa-zerbitzari batera "
-"konektatuta badago, konektatu inprimagailua paraleloko lehen atakarekin "
-"probako orria inprimatu aurretik. Bestela, inprimagailuak ez du "
-"funtzionatuko. Zure konexio-motaren ezarpena ez du kontuan hartuko "
-"kontrolatzaileak."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet inprimagailuaren konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark-en Inkjet inprimagailu-kontrolatzaileek inprimagailu lokalak soilik "
-"onartzen dituzte, ez urruneko makinetako inprimagailuak edo inprimaketa-"
-"zerbitzariak. Konektatu zure inprimagailua ataka lokal batera edo konfigura "
-"ezazu konektatuta dagoen makinan."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Lexmark inkjet-ekin eta konfigurazio honekin inprimatu ahal , izateko, "
-"Lexmark-ek emandako inkjet inprimagailu-kontrolatzaileak behar dituzu "
-"(http://www.lexmark.com/). Joan Estatu Batuetako gunera eta egin klik "
-"\"Drivers\" botoian. Gero aukeratu modeloa eta ondoren \"Linux\" sistema "
-"eragile gisa. Kontrolatzaileak RPM pakete gisa edo instalazio grafiko "
-"interaktiboa duten shell script gisa egoten dira. Ez da beharrezkoa "
-"konfigurazio hau interfaze grafikoen bidez egitea. Ezeztatu zuzenean "
-"lizentzia-kontratuaren ondoren. Gero inprimatu inprimatze-burua lerrokatzeko "
-"orriak \"lexmarkmaintain\"ekin eta doitu burua lerrokatzeko ezarpenak "
-"programa honekin."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Inprimagailuaren ezarpen lehenetsiak\n"
-"\n"
-"Ziurtatu orri-tamaina eta tinta-mota/inprimatzeko modua (erabilgarri badago)"
-"eta laser inprimagailuaren hardware-konfigurazioa zuzen ezarri direla. "
-"Kontuan hartu inprimatzeko kalitatea oso handia bada askoz mantsoago "
-"inprimatuko duela segurutik."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s aukerak osoko zenbakia izan behar du!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s aukerak zenbakia izan behar du!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s aukera barrutitik kanpo dago!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Inprimagailu hau (\"%s\")\n"
-"lehenetsi nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Proba-orriak"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Hautatu inprimatu nahi dituzun proba-orriak.\n"
-"Kontuan hartu: argazkien proba-orriak denbora asko behar izan dezake "
-"inprimatzeko, eta memoria gutxiko laser inprimagailuetan baliteke ez "
-"ateratzea ere. Gehienetan nahikoa izaten da proba-orri estandarra "
-"inprimatzea."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Proba-orririk ez"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Inprimatu"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Proba-orri estandarra"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Proba-orri alternatiboa (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Proba-orri alternatiboa (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Argazkien proba-orria"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Ez inprimatu proba-orririk"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Proba-orria(k) inprimatzen..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Proba-orria(k) inprimagailura bidali dira.\n"
-"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
-"Inprimatze-egoera:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Proba-orria(k) inprimagailura bidali dira.\n"
-"Denbora pixka bat igaro liteke inprimatzen hasi arte.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Ongi egin du?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Inprimagailu \"gordina\""
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, \"%s "
-"<fitxategia>\" komandoa edo inprimatze-tresna grafiko bat erabil dezakezu: "
-"\"xpp <fitxategia>\" edo \"kprinter <fitxategia>\". Tresna grafikoak "
-"inprimagailua hautatzeko eta aukeren ezarpenak erraz aldatzeko erabiltzen "
-"dira.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Komando horiek aplikazio askotako inprimatze-elkarrizketetako \"Inprimatzeko "
-"komandoa\" eremuan erabil ditzakezu ere, baina hor ez eman fitxategi-izena, "
-"inprimatu behar den fitxategia aplikazioak ematen baitu.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\" komandoaren bidez ere alda daitezke inprimatze-lan jakin baten aukera-"
-"ezarpenak. Gehitu nahi dituzun ezarpenak komando-lerroari, adib. \"%s "
-"<fitxategia>\". "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Uneko inprimagailuak dituen aukerak ezagutzeko, irakurri ondoko zerrenda edo "
-"egin klik \"Inprimatzeko aukeren zerrenda\" botoian.%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hemen duzu inprimagailu honen inprimatzeko aukeren zerrenda:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
-"<fitxategia>\" komandoa.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Komando hau aplikazio askotako inprimatze-elkarrizketetako \"Inprimatzeko "
-"komandoa\" eremuan ere erabil dezakezu. Baina hor ez eman fitxategi-izena, "
-"inprimatu behar den fitxategia aplikazioak ematen baitu.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Uneko inprimagailuaren aukera erabilgarrien zerrenda eskuratzeko, egin klik "
-"\"Inprimatzeko aukeren zerrenda\" botoian."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Fitxategi bat komando-lerrotik (terminal-leihoa) inprimatzeko, erabili \"%s "
-"<fitxategia>\" komandoa edo \"%s <fitxategia>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"\"xpdq\" interfaze grafikoa ere erabil dezakezu aukerak ezartzeko eta "
-"inprimatze-lanak maneiatzeko.\n"
-"KDE erabiltzen baduzu mahaigaineko ingurune gisa, \"estualdi-botoi\" bat "
-"egongo da, \"GELDITU inprimagailua!\" dioena, eta inprimatze-lan guztiak "
-"berehala etengo ditu bertan klik egitean. Papera trabatzen denean eta "
-"horrelakoetan erabili ohi da.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" eta \"%s\" komandoen bidez inprimatze-lan baten aukera-ezarpenak alda "
-"daitezke. Aski da nahi diren ezarpenak komando-lerroan gehitzea, adib.: \"%s "
-"<fitxategia>\".\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Itxi"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "\"%s\": inprimatzen/eskaneatzen"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "\"%s\" inprimagailuan inprimatzen"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Inprimatzeko aukeren zerrenda"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Funtzio anitzeko HP gailua automatikoki konfiguratuta dago eskaneatzeko. "
-"Orain \"scanimage\"rekin eskanea dezakezu (\"scanimage -d hp:%s\" eskanerra "
-"zehazteko, bat baino gehiago badituzu) komando-lerrotik edo \"xscanimage\" "
-"edo \"xsane\" interfaze grafikoekin. GIMP erabiltzen baduzu, \"File\"/"
-"\"Acquire\" menuko puntu egokiaren bidez ere eskanea dezakezu. Informazio "
-"gehiago nahi baduzu, idatzi \"man scanimage\" eta \"man sane-hp\" komando-"
-"lerroan.\n"
-"\n"
-"Ez erabili \"scannerdrake\" gailu honekin!"
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Funtzio anitzeko HP gailua automatikoki konfiguratuta dago eskaneatzeko. "
-"Orain komando-lerrotik eskanea dezakezu \"ptal-hp %s scan ...\"ekin. Zure "
-"gailuak ez du onartzen interfaze grafikoaren edo GIMPen bidez eskaneatzea. "
-"Informazio gehiago, sistemako \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" "
-"fitxategian aurkituko duzu. HP LaserJet 1100 edo 1200 baldin baduzu, "
-"eskanerraren aukera instalatuta daukazunean bakarrik eskaneatu ahal izango "
-"duzu.\n"
-"\n"
-"Ez erabili \"scannerdrake\" gailu honekin!"
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Inprimagailu-datuak irakurtzen..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transferitu inprimagailu-konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"%s spooler-erako egin duzun inprimagailu-konfigurazioa %s spooler-era (uneko "
-"spooler-era) kopia dezakezu. Konfigurazio-datu guztiak (inprimagailuaren "
-"izena, azalpena, kokalekua, \n"
-"konexio-mota eta aukera-ezarpenak lehenetsiak) hartuko ditu, baina lanak ez "
-"dira transferituko.\n"
-"Ilara guztiak ezin dira transferitu, ondorengo arrazoiak direla eta:\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPSek ez ditu onartzen Novell zerbitzarietako inprimagailuak edo datuak "
-"libre osatutako komando batean bidaltzen dituztenak.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQk inprimagailu lokalak, urruneko LPD inprimagailuak eta Socket/TCP "
-"inprimagailuak soilik onartzen ditu.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPDk eta LPRng-ek ez dute IPP inprimagailurik onartzen.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Gainera, programa honen edo \"foomatic-configure\"ren bidez sortu ez diren "
-"ilarak ezin dira transferitu."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Halaber, fabrikatzaileek emandako PPD fitxategiekin edo jatorrizko CUPS "
-"kontrolatzaileekin konfiguratutako inprimagailuak ezin dira transferitu."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markatu transferitu nahi dituzun inprimagailuak eta sakatu\n"
-"\"Transferitu\"."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Ez transferitu inprimagailuak"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transferitu"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" izeneko inprimagailu bat badago %s(e)n. \n"
-"Sakatu \"Transferitu\" gainidazteko.\n"
-"Beste izen bat idatz dezakezu, edo inprimagailu hori saltatu."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Inprimagailu-izenak letrak, zenbakiak eta azpimarra soilik eduki behar ditu"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"\"%s\" inprimagailua badago lehendik ere,\n"
-"bere konfigurazioa gainidatzi nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Inprimagailu-izen berria"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "%s transferitzen..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Zure lehengo inprimagailu lehenetsia (\"%s\") transferitu duzu, Inprimagailu "
-"lehenetsia izan behar du %s inprimatze-sistema berrian ere?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Inprimagailuaren datuak freskatzen..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Urruneko inprimagailu baten konfigurazioa"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Sarea abiarazten ..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Konfiguratu sarea orain"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Sare-funtzionalitatea ez dago konfiguratuta"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Urruneko inprimagailu bat konfiguratzera zoaz. Sarerako sarbidea behar duzu "
-"horretarako, baina sarea konfiguratu gabe dago. Aurrera jarraitzen baduzu "
-"sarea konfiguratu gabe, ezin izango duzu orain konfiguratzen ari zaren "
-"inprimagailua erabili. Zer egin nahi duzu?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Jarraitu sarea konfiguratu gabe"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"Instalazioan egindako sare-konfigurazioa ezin da abiarazi orain. "
-"Berrabiarazi sistema eta begiratu ea sarean sartzen zaren eta, ondoren, "
-"zuzendu konfigurazioa Mandrake Kontrol Zentroko \"Sarea eta Internet\"/"
-"\"Konexioa\" atalean, eta gero konfiguratu inprimagailua, Mandrake Kontrol "
-"Zentroan bertan, \"Hardwarea\"/\"Inprimagailua\" atalean."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Sarerako sarbidea ez dago martxan eta ezin da abiarazi. Begiratu "
-"konfigurazioa eta hardwarea ondo dauden. Gero saiatu berriro urruneko "
-"inprimagailua konfiguratzen."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Inprimatze-sistema berrabiarazten ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "handia"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidea"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Inprimatze-sisteman segurtasun-maila %s instalatzen"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"%s inprimatze-sistema segurtasun-maila %sn dabilen sisteman instalatzera "
-"zoaz.\n"
-"\n"
-"Inprimatze-sistema honek inprimatze-lanei itxaroteko eta lanak maneiatzeko "
-"daemon (atzeko planoko prozesu) bat exekutatzen du. Daemon hori urruneko "
-"makinek ere atzitu dezakete sarearen bitartez eta hala, erasoak jasateko "
-"gunea izan daiteke. Beraz, daemon hautatu bakan batzuk besterik ez dira "
-"abiarazten lehenespenez segurtasun-maila honetan.\n"
-"\n"
-"Makina honetan konfiguratu nahi duzu inprimaketa?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Abioan inprimatze-sistema abiarazi"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"(%s) inprimatze-sistema ez da automatikoki hasiko makina abiarazten denean.\n"
-"\n"
-"Baliteke abiarazte automatikoa desaktibatuta egotea segurtasun-maila "
-"handiagora aldatu delako, eta inprimatze-sistema eraso-gune potentziala "
-"delako.\n"
-"\n"
-"Inprimatze-sistema automatikoki hastea berriro aktibatu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Instalatutako softwarea egiaztatzen..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "LPRng kentzen..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "LPD kentzen..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Hautatu inprimagailuaren spooler-a"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Zein inprimatze-sistema (spooler) erabili nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "\"%s\" inprimagailua konfiguratzen..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Foomatic instalatzen ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Inprimagailuaren aukerak"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "PrinterDrake prestatzen..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Aplikazioak konfiguratzen..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Inprimaketa konfiguratu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Inprimatze-sistema: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Ondoko inprimagailuak daude konfiguratuta. Egin klik bikoitza inprimagailu "
-"batean ezarpenak aldatzeko; inprimagailua lehenesteko; informazioa ikusteko; "
-"edo urruneko CUPS zerbitzari bateko inprimagailu bat Star Office/OpenOffice."
-"org-rentzat erabilgarri egiteko."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Ondoko inprimagailuak daude konfiguratuta. Ezarpenak aldatzeko, inprimagailu "
-"bat lehenesteko edo informazioa ikusteko, egin klik bikoitza inprimagailu "
-"batean."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Freskatu inprimagailu-zerrenda (urruneko CUPS inprimagailuak ikusteko)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Aldatu inprimatzeko sistema"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Modu normala"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Beste inprimagailu bat konfiguratu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Aldatu inprimagailuaren konfigurazioa"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"%s inprimagailua\n"
-"Zer da inprimagailu honetan aldatu nahi duzuna?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Egin!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Inprimagailuaren konexio-mota"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Inprimagailuaren izena, azalpena, kokalekua"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Inprimagailuaren fabrikatzailea, modeloa, kontrolatzailea"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Inprimagailuaren fabrikatzailea, modeloa"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Ezarri inprimagailu hau lehenetsi gisa"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Gehitu inprimagailu hau Star Office/OpenOffice.org-n"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Kendu inprimagailu hau Star Office/OpenOffice.org-tik"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Inprimatu proba-orriak"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Ikasi inprimagailua erabiltzen"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Kendu inprimagailua"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "\"%s\" inprimagailu zaharra kentzen..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Inprimagailu lehenetsia"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "\"%s\" inprimagailua lehenetsi gisa ezarri da orain."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Star Office/OpenOffice.org-n inprimagailua gehitzen"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-"\"%s\" inprimagailua behar bezala gehitu da Star Office/OpenOffice.org-n."
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org-n gehitzean."
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Inprimagailua Star Office/OpenOffice.org-tik kentzen"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-"\"%s\" inprimagailua behar bezala kendu da Star Office/OpenOffice.org-tik."
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-"Huts egin du \"%s\" inprimagailua Star Office/OpenOffice.org-tik kentzean."
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "\"%s\" inprimagailua kendu nahi duzu?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "\"%s\" inprimagailua kentzen..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-konfigurazioa"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Ongi etorri proxy-a konfiguratzeko utilitatera.\n"
-"\n"
-"Hemen zure http eta ftp proxy-ak konfiguratu ahal izango\n"
-"dituzu, erabiltzaile-izenarekin eta pasahitzarekin edo gabe.\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Bete http proxy-aren datuak\n"
-"Utzi hutsik ez baduzu http proxy-rik nahi"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URLa"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "ataka"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "URLaren hasieran 'http:' jarri behar du"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Atakaren zatiak zenbakizkoa izan behar du"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Bete ftp proxy-aren datuak\n"
-"Utzi hutsik ez baduzu ftp proxy-rik nahi"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "URLaren hasieran 'ftp:' jarri behar du"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Sartu proxy-aren erabiltzaile-izena eta pasahitza, baldin badago.\n"
-"Utzi hutsik ez baduzu erabiltzaile-izen/pasahitzik nahi"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "erabiltzaile-izena"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "pasahitza"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "idatzi pasahitza berriro"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Pasahitzak ez datoz bat. Saiatu berriro!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ezin zaio partizio bat gehitu RAID md%d-ri (formateatuta dago)"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ezin da %s fitxategia idatzi"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid-ek huts egin du"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid-ek huts egin du (beharbada raid-tresnak faltako dira?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ez dago nahikoa partizio %d RAID mailarako\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Abiarazi ALSA (Advanced Linux Sound Architecture) soinu-sistema"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, komando-antolatzaile periodikoa."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd bateriaren egoera kontrolatzeko eta syslog-en jasotzeko erabiltzen\n"
-"da. Bateria gutxi dagoenean makina itzaltzeko ere erabil daiteke."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at komandoaren bidez programatutako komandoak exekutatzen ditu at \n"
-"exekutatzean zehaztutako orduan, eta batch komandoak exekutatzen ditu \n"
-"batezbesteko karga nahikoa baxua denean."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron UNIX programa estandar bat da, erabiltzaileak zehaztutako programak\n"
-"programatutako orduan exekutatzen dituena. vixie cron-ek hainbat eginbide \n"
-"gehitzen dizkio oinarrizko UNIX cron-i, hala nola segurtasun hobea eta "
-"konfigurazio-aukera ahaltsuagoak."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPMk saguaren euskarria gehitzen die Midnight Commander bezalako\n"
-"testuan oinarritutako Linux aplikazioei. Halaber kontsolan saguaren bidez "
-"ebaki eta itsasteko aukera ematen du eta laster-menuen euskarria eransten du."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake-k hardware-proba bat exekutatzen du eta nahi izanez \n"
-"gero hardware berria/aldatua konfiguratzen du."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache World Wide Web-eko zerbitzari bat da. HTML fitxategiak eta CGI "
-"zerbitzatzeko erabili ohi da."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Interneteko superzerbitzariaren daemon-ak (normalki inetd deitua) beste\n"
-"hainbat Internet-zerbitzu abiarazten ditu, behar izan ahala. Zerbitzu asko "
-"abiarazten ditu,\n"
-"hala nola telnet, ftp, rsh, eta rlogin. inetd desgaitzean bere ardurapeko\n"
-"zerbitzu guztiak desgaitzen dira."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Abiarazi Linux-nukleoen 2.2 serieko pakete-iragazketa, zure \n"
-"makina sareko erasoetatik babesteko suebaki bat ezartzeko."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Pakete honek hautatutako teklatu-mapa kargatzen du\n"
-"/etc/sysconfig/keyboard fitxategian ezarritakoaren arabera. kbdconfig "
-"utilitatearen bidez hauta daiteke teklatu-mapa.\n"
-"Zerbitzu hau gaituta uztea komeni da makina gehienetan."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Nukleoaren goiburukoaren birsortze automatikoa /boot-en\n"
-"honentzat: /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Hardwarea automatikoki detektatu eta konfiguratzea abioan."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf-ek batzuetan hainbat ataza egiten ditu abioan\n"
-"sistemaren konfigurazioa mantentzeko."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd inprimaketako daemon-a da. Beharrezkoa da lpr-k ondo funtziona\n"
-"dezan. Inprimatze-lanak inprimagailu(eta)ra esleitzen dituen zerbitzaria da."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux-en Zerbitzari Birtuala, performantzia handiko zerbitzari oso\n"
-"erabilgarria eraikitzeko erabiltzen da."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) domeinu-izenen zerbitzari bat (DNS) da, ostalari-izenak ebatzi "
-"eta IP helbide bihurtzeko erabiltzen dena."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Network File System (NFS), SMB (Lan Manager/Windows), eta NCP \n"
-"(NetWare) muntatze-puntu guztiak muntatu eta desmuntatzen ditu."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Abioan hasteko konfiguratuta dauden sare-interfaze guztiak\n"
-"aktibatzen/desaktibatzen ditu."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak konpartitzeko.\n"
-"Zerbitzu honek NFS zerbitzariaren funtzionaltasuna (/etc/exports "
-"fitxategian\n"
-"konfiguratua) eskaintzen du."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS protokolo ezagun bat da, TCP/IP sareetan fitxategiak \n"
-"konpartitzeko. Zerbitzu honek NFS fitxategi-blokeatzearen funtzionalitatea\n"
-"eskaintzen du."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Abioan automatikoki aktibatu BlokZenb tekla (zenbakiak\n"
-"blokeatzekoa) kontsolan eta XFree-n."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Onartu OKI 4w eta winprinter bateragarriak."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA euskarria eramangarrietan ethernet eta modemak\n"
-"eta horrelakoak onartzeko izaten da normalki. Ez da abiaraziko "
-"konfiguratuta izan ezean, beraz\n"
-"lasai eduki daiteke instalatuta premiarik izan ez arren."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ataka-mapatzaileak RPC konexioak kudeatzen ditu. Konexio horiek\n"
-"NFS eta NIS moduko protokoloek erabiltzen dituzte. RPC mekanismoa erabiltzen "
-"duten\n"
-"protokoloen zerbitzari gisa jokatzen duten makinetan aktibatu behar da\n"
-"ataka-maparen zerbitzaria."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix posta garraiatzeko agentea da (Mail Transport Agent - MTA), hau da, "
-"posta elektronikoa makina batetik bestera eramaten duen programa."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sistemaren entropia gorde eta leheneratzen du ausazko zenbakiak\n"
-"hobeto sortzeko."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Esleitu gailu \"gordinak\" (raw devices) blokeko gailuei \n"
-"(disko gogorreko partizioak adib.), Oracle bezalako aplikazioentzat."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed daemon-arekin IP bidatze-taula automatikoki egunera daiteke,\n"
-"RIP protokoloaren bidez. RIP asko erabiltzen da sare txikietan, baina\n"
-"banabide-protokolo konplexuagoak behar dira sare konplexuetan."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokoloari esker, sareko erabiltzaileek sare horretako \n"
-"edozein makinaren performantzia nolakoa den jakin dezakete."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokoloak sare bateko erabiltzaileei beste makina batzuetan\n"
-"nor sartzen den identifikatzeko aukera ematen die."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho protokoloak urruneko erabiltzaileei rwho daemon-a (finger-en antzekoa)\n"
-"duen makina batean sartutako erabiltzaile guztien zerrenda eman diezaieke."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Abiarazi zure makinako soinu-sistema"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog, daemon askok erabiltzen duten zerbitzua da, mezuak sistemako\n"
-"hainbat egunkari-fitxategitan sartzeko. Komeni izaten da syslog beti "
-"exekutatzea."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Kargatu USB gailuen kontrolatzaileak."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X letra-tipoen zerbitzaria abiarazten du (nahitaezkoa da XFree-k\n"
-"funtzionatu ahal izan dezan.)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Aukeratu zein zerbitzari abiarazi behar den automatikoki abioan"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Inprimatzea"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Fitxategi-konpartitzea"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Sistema"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Urruneko administrazioa"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Datu-baseen zerbitzaria"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Zerbitzuak: %d aktibatuta / %d erregistratuta"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Zerbitzuak"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "martxan"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "geldituta"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Zerbitzuak eta daemon-ak"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ez dago zerbitzu honi buruzko\n"
-"informazio gehiago."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Abioan"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Hasi"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Gelditu"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Eskerrik asko Mandrake Linux 8.2 aukeratzeagatik"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Ongi etorri iturburu irekiaren mundura"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"MandrakeSoft-en arrakastaren funtsa software librearen printzipioa da. Zure "
-"sistema eragile berria mundu osoko Linux komunitatearen elkarlanaren emaitza "
-"da"
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Sar zaitez software librearen munduan"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Ezagutu iturburu irekiaren komunitatea eta egin zaitez partaide. "
-"Sartu eztabaida-taldeetan \"Komunitatearen\" web orrien bidez eta ikasi, "
-"irakatsi eta lagundu beste batzuei."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet eta mezularitza"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2k software-aukera onenak eskaintzen dizkizu Internetek "
-"eman lezakeen guztia eskura dezazun. Murgildu amaraunean eta ikusi "
-"animazioak Mozilla eta Konqueror-ekin, trukatu mezuak eta antolatu zure "
-"informazio pertsonala Evolution eta Kmail-ekin, eta askoz ere gehiago"
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimedia eta grafikoak"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Mandrake Linux 8.2ekin zure multimedia ordenagailua mugaraino eramango duzu! "
-"Erabili audio-fitxategiak erreproduzitzeko, irudiak eta argazkiak editatu "
-"eta manipulatzeko eta TB eta bideoak ikusteko eta beste gauza askotarako "
-"azken softwarea "
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Garapena"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 garapen-plataforma ezin hobea da. Ezagutu GNU gcc "
-"konpilatzailearen ahalmen osoa eta iturburu irekiko garapen-ingurune onenak"
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake-ren Kontrol Zentroa"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Mandrake Linux 8.2ren Kontrol Zentroak leku bakarretik zure Mandrake sistema "
-"erabat konfiguratu eta pertsonalizatzeko aukera ematen dizu"
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Erabiltzaile-interfazeak"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2k 11 mahaigaineko ingurune grafiko eta leiho-kudeatzaile "
-"desberdin ematen ditu aukeran, horien artean, GNOME 1.4, KDE 2.2.2, Window "
-"Maker 0.8, eta abar"
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Zerbitzari-softwarea"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"Bihur ezazu zure makina zerbitzari ahaltsu, saguaren klik gutxi batzuk "
-"eginez: Web zerbitzaria, posta, suebakia, bidatzailea, fitxategi- eta "
-"inprimaketa-zerbitzaria,..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jokoak"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2k iturburu irekiko jokorik onenak eskaintzen ditu - makina-"
-"jokoak, kiroletakoak, estrategiakoak, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Linux erabiltzen ikasi nahi duzu erraz, bizkor, eta doan? MandrakeSoft-ek "
-"Linux ikasteko doako zerbitzua eskaintzen dugu, zure aurrerapena neurtuz, "
-"MandrakeCampus lineako trebakuntza-zentroaren bidez"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Kalitatezko laguntza-zerbitzua eskaintzen dute Linux komunitateak eta "
-"MandrakeSoft-ek, eta hortxe bertan duzu. Linux-en beteranoa bazara, egin "
-"zaitez \"Aditu\", eta konpartitu zure jakituria eta gure laguntzako web "
-"gunea "
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Zure IT proiektuetarako, hor dituzu gure ahokulariak, zure premiak ulertu "
-"eta konponbide pertsonalizatua emateko prest. MandrakeSoft-ek, Linux ekoizle "
-"gisa duen esperientzia handiarekin, benetako IT alternatiba ematen du "
-"enpresa-antolamendurako"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"Gure denda elektronikoan eskuragai dituzu gure Linux soluzioen aukera "
-"zabala, produktuei buruzko eskaintza bereziak eta bestelako 'gutiziak'"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"MandrakeSoft-en Zerbitzu Profesionalei eta eskaintza komertzialei buruzko "
-"informazioa nahi baduzu, ikus web orri hau:"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Paketeak instalatzen..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ezin dut zure partizio-taula irakurri, hondatuegia dago :(\n"
-"Partizio txarrak garbitzen saiatuko naiz"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Errorea!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ezin da aurkitu `%s' imajina-fitxategia, eta beharrezkoa da."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Instalazio automatikoaren konfiguratzailea"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Auto-instalazioko diskete bat konfiguratzera zoaz. Eginbide hau arriskutsu "
-"samarra da eta kontuz ibili behar da.\n"
-"\n"
-"Eginbide honekin, ordenagailu honetan egin duzun instalazioa errepikatu ahal "
-"izango duzu, eta urrats batzuetan datuak eskatuko zaizkizu interaktiboki, "
-"balioak aldatu ahal izateko.\n"
-"\n"
-"Ahalik eta segurtasun handiena izateko, partizioa egitea eta formateatzea ez "
-"dira inoiz automatikoki egingo, berdin dio zer aukeratu duzun ordenagailu "
-"hau instalatu duzunean.\n"
-"\n"
-"Jarraitu nahi duzu ?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Urrats automatikoen konfigurazioa"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Aukeratu urrats bakoitzean instalazioa errepikatuko den, ala eskuz egingo "
-"duzun"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Ongi etorri.\n"
-"\n"
-"Auto-instalazioko parametroak ezkerreko sekzioetan daude erabilgarri"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Zorionak!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketea behar bezala sortu da.\n"
-"Orain zure instalazioa errepika dezakezu."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Instalazio automatikoa"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Gehitu elementu bat"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Kendu azken elementua"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr "***********************************************************************\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup-en berri-ematea \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup Daemon-aren berri-ematea\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup-en berri-ematearen xehetasunak\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "progresioa guztira"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sistema-fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Disko gogorraren babeskopia fitxategiak... "
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Erabiltzaile-fitxategien babeskopia... "
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Disko gogorraren babeskopia egiten..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Beste fitxategi batzuen babeskopia... "
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"FTPk bidalitako fitxategi-zerrenda: %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP konexio-arazoa: zure babeskopien fitxategiak ezin izan dira bidali "
-"FTP bidez.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Errorea posta bidaltzean. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Fitxategi-hautapena"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Hautatu fitxategiak edo direktorioak eta egin klik 'Gehitu'n"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Hautatu behar dituzun aukera guztiak.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Aukera horiek /etc direktorioko fitxategi guztiak kopiatu eta leheneratu "
-"ditzakete.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sistema-fitxategien babeskopia. ( /etc direktorioa )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Erabili babeskopia inkrementala (ez ordeztu kopia zaharrak)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ez sartu fitxategi kritikoak (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Aukera honekin /etc direktorioaren edozein bertsio leheneratu\n"
-"ahal izango duzu."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Hautatu babeskopian sartu nahi dituzun erabiltzaile guztiak."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ez sartu arakatzailearen cache-a"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Erabili babeskopia inkrementalak (ez ordeztu kopia zaharrak)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Kendu hautatutakoak"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Erabiltzaileak"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Erabili FTP konexioa babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Idatzi ostalariaren izena edo IPa."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Adierazi ostalariko direktorioa\n"
-"babeskopia jartzeko."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Sartu saioa hasteko izena"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Sartu pasahitza"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Gogoratu pasahitza"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP konexioa"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Konexio segurua"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Erabili CD/DVDROMa babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Aukeratu CDko lekua"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Hautatu CDRW euskarria erabiltzen baduzu"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Hautatu CDRWa ezabatu nahi baduzu lehenik"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Hautatu instalazio-abioa gehitu nahi\n"
-" baduzu CDan."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Adierazi CD idazgailuaren gailu-izena \n"
-" adib.: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Erabili zinta babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Adierazi babeskopiarako erabiliko den gailuaren izena"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Adierazi Drakbackup-en gehieneko\n"
-" tamaina "
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Adierazi gorde beharreko direktorioa:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Erabili kuota babeskopia-fitxategientzat"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Sarea"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "orduero"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "egunero"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "astero"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "hilero"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Erabili daemon-a"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Aukeratu babeskopiak egiteko \n"
-"maiztasuna"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Aukeratu babeskopia \n"
-"egiteko euskarria."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Erabili Disko gogorra daemon-arekin"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Erabili FTP daemon-arekin"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Ziurtatu cron daemon-a zerbitzuetan sartuta daukazula."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Babeskopia egindakoan, bidali berri-emateko mezua hona :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Zer"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Non"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Noiz"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Aukera gehiago"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr " Drakbackup-en konfigurazioa"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Aukeratu non egin nahi duzun babeskopia"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "disko gogorrean"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "sarean zehar"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Aukeratu zeren kopia egin nahi duzun"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sistemaren babeskopia "
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Erabiltzaileen babeskopia"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Hautatu erabiltzailea eskuz"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Babeskopien iturburua: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Sistema-fitxategiak:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Erabiltzaile-fitxategiak:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Bestelako fitxategiak:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Gorde disko gogorrean, bide-izen honetan: %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Gorde FTPan, ostalari honetan : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t erabiltzaile-izena: %s\n"
-"\t\t bide-izena: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Aukerak:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tEz sartu sistema-fitxategiak\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBabeskopietan erabili tar eta bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBabeskopietan erabili tar eta gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon-ean (%s) sartzen da :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t Disko gogorra.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CDROMa.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\tFTP bidezko sarea.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\tSSH bidezko sarea.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ez dago konfiguraziorik, egin klik Morroian edo Aurreratuan.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Leheneratu beharreko datuen zerrenda:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Hondatutako datuen zerrenda:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Desautatu edo kendu hurrengo aldian."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Babeskopien fitxategiak hondatuta daude"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr " Hautatu dituzun datu guztiak "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " behar bezala leheneratu dira hona: %s "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr " leheneratzeko konfigurazioa "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Ados, leheneratu beste fitxategiak"
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Leheneratzeko erabiltzaile-zerrenda (erabiltzaile bakoitzaren datu berrienak "
-"bakarrik dira garrantzitsuak)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Kopiatu sistema-fitxategiak lehenago:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "aukeratu leheneratzeko data"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Erabili disko gogorra babeskopia egiteko"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Leheneratu disko gogorretik"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Adierazi zein direktoriotan dauden babeskopiak"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Hautatu beste euskarri bat leheneratzeko"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Beste euskarri bat"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Leheneratu sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Leheneratu erabiltzaileak"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Leheneratu bestelakoak"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "hautatu leheneratzeko bidea ( / ordez)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Egin babeskopia berria leheneratu aurretik (inkrementaletan soilik.)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Kendu erabiltzaile-direktorioak leheneratu aurretik."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Leheneratu babeskopia guztiak."
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Leheneratze pertsonalizatua"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Laguntza"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Aurrekoa"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Gorde"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Egin babeskopia"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Leheneratu"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Hurrengoa"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Egin babeskopia leheneratu aurretik...\n"
-" edo egiaztatu gordetzeko bidea zuzena dela."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-"Errorea posta bidaltzean\n"
-" berri emateko mezua ez da bidali\n"
-" Konfiguratu posta-bidalketa"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Instalatu beharreko pakete-zerrenda"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Errorea FTP bidez fitxategia bidaltzean.\n"
-" Zuzendu FTP konfigurazioa."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Hautatu leheneratzeko datuak..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Hautatu babeskopiaren euskarria..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Hautatu babeskopia egiteko datuak..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ez da konfigurazio-fitxategirik aurkitu \n"
-"egin klik Morroia-n edo Aurreratua-n."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Garatzen... itxaron."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Sistema-fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Erabiltzaile-fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Bestelako fitxategien babeskopia"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Guztizko progresioa"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "fitxategiak FTP bidez bidaltzen"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Fitxategiak bidaltzen..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "CDROMean gehitzeko datu-zerrenda"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Idatzi CD idazgailuaren abiadura"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Idatzi zure CD idazgailuaren izena (adib.: 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Hautatu instalazio-abioa gehitu nahi baduzu CDan."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Egin babeskopia konfigurazio-fitxategitik"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Ikusi babeskopiaren konfigurazioa"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Morroiaren konfigurazioa"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Konfigurazio aurreratua"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Egin babeskopia orain"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-" Urrats honetan, Drakbackup-en bidez aldatuko dituzu:\n"
-"\n"
-" - Konprimitze-modua:\n"
-" \n"
-" bzip2 konpresioa hautatuz, gzip-ekin baino hobeto\n"
-" konprimituko dituzu datuak (% 2-10 inguru).\n"
-" Aukera hau ez da lehenespen gisa hautatzen konpresio-modu\n"
-" honek denbora gehiago (% 1000 gehiago) hartzen duelako.\n"
-" \n"
-" - Eguneratze-modua:\n"
-"\n"
-" Aukera honek babeskopia eguneratuko du, baina ez da\n"
-" oso erabilgarria, eguneratu aurretik babeskopia\n"
-" deskonprimitu egin behar baita.\n"
-" \n"
-" - .backupignore modua:\n"
-"\n"
-" cvs-rekin bezala, Drakbackup-ek ezikusi egingo die\n"
-" .backupignore fitxategietako erreferentzia guztiei.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Posta bidaltzean izandako errore batzuk postfix gaizki \n"
-" konfiguratuta dagoelako izan dira. Konpontzeko, \n"
-" myhostname edo mydomain ezarri behar duzu hemen: /etc/postfix/main.cf\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-" - Sistema-fitxategien babeskopia:\n"
-" \n"
-"\tAukera honen bidez konfigurazio-fitxategi guztiak dituen\n"
-"\t/etc direktorioaren babeskopia egin daiteke. Kontuz ibili\n"
-"\tleheneratze-urratsean, eta ez gainidatzi hauek:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Erabiltzaile-fitxategien babeskopia: \n"
-"\n"
-"\tAukera honen bidez, babeskopia egiteko erabiltzaileak\n"
-"\thauta ditzakezu.\n"
-"\tDisko-lekua gordetzeko, web arakatzailearen cachea ez \n"
-"\tsartzea komeni da.\n"
-"\n"
-" - Bestelako fitxategien babeskopia: \n"
-"\n"
-"\tAukera honen bidez, gordetzeko datu gehiago gehituko dituzu.\n"
-"\tBeste babeskopiekin ezin da oraindik babeskopia inkrementala hautatu.\t\t\n"
-" \n"
-" - Babeskopia inkrementalak:\n"
-"\n"
-"\tBabeskopia-aukera ahaltsuena da. Aukera honen\n"
-"\tbidez, lehen aldian datu guztien babeskopia egin\n"
-"\tdaiteke, eta gero aldatuenak bakarrik.\n"
-"\tGero, leheneratze-urratsean, data jakin bateko\n"
-"\tdatuak leheneratu ahal izango dituzu.\n"
-"\tAukera hau hautatuta ez baduzu, babeskopia zahar guztiak\n"
-"\tezabatzen dira babeskopia bakoitza egin aurretik. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"leheneratze-azalpena:\n"
-" \n"
-"Data berrienak soilik erabiliko dira, babeskopia inkrementalean\n"
-"beharrezkoa delako babeskopia zaharrak banan-banan ezabatzea.\n"
-"\n"
-"Erabiltzaile bat leheneratu nahi ez baduzu, desautatu haren \n"
-"kontrol-laukia.\n"
-"\n"
-"Bestela, hauetako bakarra hautatu ahal izango duzu\n"
-"\n"
-" - Babeskopia inkrementalak:\n"
-"\n"
-"\tBabeskopia-aukera ahaltsuena da. Aukera honen\n"
-"\tbidez, lehen aldian datu guztien babeskopia egin\n"
-"\tdaiteke, eta gero aldatuenak bakarrik.\n"
-"\tGero, leheneratze-urratsean, data jakin bateko\n"
-"\tdatuak leheneratu ahal izango dituzu.\n"
-"\tAukera hau hautatuta ez baduzu, babeskopia zahar guztiak\n"
-"\tezabatzen dira babeskopia bakoitzaren aurretik. \n"
-"\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft, DUPONT Sebastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Programa hau software librea da; birbana eta/edo alda dezakezu\n"
-" Software Foundation-ek argitaratutako GNU Lizentzia Publiko Orokorraren\n"
-" 2. bertsioan, edo (nahiago baduzu) beste berriago batean, jasotako\n"
-" baldintzak betez gero.\n"
-"\n"
-" Programa hau erabilgarria izango delakoan banatzen da, baina\n"
-" INOLAKO BERMERIK GABE; era berean, ez da bermatzen beraren\n"
-" EGOKITASUNA MERKATURATZEKO edo HELBURU PARTIKULARRETARAKO ERABILTZEKO.\n"
-" Argibide gehiago nahi izanez gero, ikus GNU Lizentzia Publiko Orokorra.\n"
-"\n"
-" Programa honekin batera GNU Lizentzia Publiko Orokorraren kopia bat\n"
-" jasoko zenuen; hala ez bada, idatzi hona: Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Azalpena:\n"
-"\n"
-" Drakbackup zure sistemaren babeskopia egiteko erabiltzen da.\n"
-" konfigurazioan zehar hauta ditzakezu: \n"
-"\t- Sistema-fitxategiak, \n"
-"\t- Erabiltzaile-fitxategiak, \n"
-"\t- Bestelako fitxategiak.\n"
-"\tedo Sistema osoa ... eta Bestelakoa (Windows partizioetan bezala)\n"
-"\n"
-" Drakbackup-en bidez, babeskopiak egiteko erabil daiteke:\n"
-"\t- Disko gogorra.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM.\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Zinta.\n"
-"\n"
-" Drakbackup erabiliz, zure sistema hautatutako\n"
-" direktorio batean lehenera dezakezu.\n"
-"\n"
-" Lehenespen gisa, babeskopia guztiak \n"
-" /var/lib/drakbackup direktorioan gordeko dira\n"
-"\n"
-" Konfigurazio-fitxategia:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Leheneratze-urratsa:\n"
-" \n"
-" Leheneratze-urratsean, DrakBackup.ek kendu egingo du\n"
-" jatorrizko direktorioa eta babeskopia-fitxategiak ez\n"
-" daudela hondatuta egiaztatuko du. Leheneratu aurretik\n"
-" babeskopia egitea gomendatzen da.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"aukeren azalpena:\n"
-"\n"
-"Kontuz ftp backup erabiltzean, eginda dauden babeskopiak \n"
-"soilik bidaliko direlako zerbitzarira.\n"
-"Beraz, orain, disko gogorrean egin behar duzu babeskopia\n"
-"zerbitzarira bidali aurretik.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Leheneratze-arazoak:\n"
-"\n"
-"Leheneratze-urratsean, Drakbackup-ek babeskopia-fitxategi\n"
-"guztiak egiaztatuko ditu leheneratu aurretik.\n"
-"Leheneratu aurretik, Drakbackup-ek kendu egingo du\n"
-"jatorrizko direktorioa, eta datu guztiak galduko dituzu.\n"
-"Garrantzizkoa da kontuz ibiltzea eta babeskopia-fitxategiak\n"
-"eskuz ez aldatzea.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Azalpena:\n"
-"\n"
-" Drakbackup zure sistemaren babeskopia egiteko erabiltzen da.\n"
-" konfigurazioan zehar hauta ditzakezu: \n"
-"\t- Sistema-fitxategiak, \n"
-"\t- Erabiltzaile-fitxategiak, \n"
-"\t- Bestelako fitxategiak.\n"
-"\tedo Sistema osoa ... eta Bestelakoa (Windows partizioetan bezala)\n"
-"\n"
-" Drakbackup-en bidez, babeskopiak egiteko erabil daiteke:\n"
-"\t- Disko gogorra.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM.\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Zinta.\n"
-"\n"
-" Drakbackup erabiliz, zure sistema hautatutako\n"
-" direktorio batean lehenera dezakezu.\n"
-"\n"
-" Lehenespen gisa, babeskopia guztiak \n"
-" /var/lib/drakbackup direktorioan gordeko dira\n"
-"\n"
-" Konfigurazio-fitxategia:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Leheneratze-urratsa:\n"
-" \n"
-" Leheneratze-urratsean, DrakBackup.ek kendu egingo du\n"
-" jatorrizko direktorioa eta babeskopia-fitxategiak ez\n"
-" daudela hondatuta egiaztatuko du. Leheneratu aurretik\n"
-" babeskopia egitea gomendatzen da.\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%sren instalazioak huts egin du. Errore hau gertatu da:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Bilatu instalatutako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Desautatu instalatutako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "analizatu letra-tipo guztiak"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "ez da letra-tiporik aurkitu"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "eginda"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "ezin izan da letra-tiporik aurkitu muntatutako partizioetan"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Hautatu berriro letra-tipo egokiak"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "ezin izan da letra-tiporik aurkitu.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Bilatu letra-tipoak instalatutakoen zerrendan"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Letra-tipoen kopia"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type letra-tipoen instalazioa"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "itxaron... ttmkfdir egin bitartean..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type instalazioa eginda"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Letra-tipoen bihurketa"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "type1inst eraikitzen"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Ghostscript erreferentzia"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf letra-tipoen bihurketa"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm letra-tipoen bihurketa"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Ezabatu aldi baterako fitxategiak"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Berrabiarazi XFS"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Ezabatu letra-tipoen fitxategiak"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs berrabiarazi"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Letra-tipoak instalatu aurretik, ziurtatu sisteman erabili eta instalatzeko "
-"baimena duzula.\n"
-"\n"
-"-Letra-tipoak instalatzeko ohiko era erabil dezakezu. Oso gutxitan, akastun "
-"letra-tipoek zure X Zerbitzaria blokea dezakete."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Letra-tipoen inportazioa"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hartu Windows letra-tipoak"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Desinstalatu letra-tipoak"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Aukera aurreratuak"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Letra-tipoen zerrenda"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Hautatu letra-tipoak onartuko dituzten aplikazioak :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Inprimagailu generikoak"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Hautatu letra-tipoen fitxategia edo direktorioa eta egin klik 'Gehitu'n"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Instalatu zerrenda"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "egin klik hemen, ziur bazaude."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "egin klik hemen, ziur ez bazaude."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Desautatutako guztiak"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Hautatutako guztiak"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Kendu zerrenda"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Hasierako probak"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopiatu zure sistemako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Instalatu eta bihurtu letra-tipoak"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Posta-instalazioa"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Kendu zure sistemako letra-tipoak"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Posta-desinstalazioa"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Interneteko konexioa konpartitzea"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Interneteko konexioa konpartitzea gaituta dago orain"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
-"Gaituta dago orain.\n"
-"\n"
-"Zer egin nahi duzu?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desgaitu"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "itxi"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "birkonfiguratu"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Zerbitzariak desgaitzen..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Interneteko konexioa konpartitzea desgaituta dago orain."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Interneteko konexioa konpartitzea desgaituta dago orain"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Interneteko konexioa konpartitzeko konfigurazioa eginda dago.\n"
-"Desgaituta dago orain.\n"
-"\n"
-"Zer egin nahi duzu?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "gaitu"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Zerbitzariak gaitzen..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Interneteko konexioa konpartitzea gaituta dago orain."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ordenagailua Interneteko konexioa konpartitzeko konfiguratzera zoaz.\n"
-"Eginbide horrekin, sare lokaleko ordenagailuek zure ordenagailuko "
-"Interneteko konexioa erabili ahal izango dute.\n"
-"\n"
-"Kontuan hartu: Sare-moldagailu dedikatu bat behar duzu sare lokala (LAN) "
-"konfiguratzeko."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "%s interfazea (%s modulua erabiliz)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "%s interfazea"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Ez dago sare-moldagailurik zure sisteman!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Zure sisteman ez da ethernet sare-moldagailurik detektatu. Exekutatu "
-"hardwarea konfiguratzeko tresna."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Sare-interfazea"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sare-moldagailu konfiguratu bakarra dago zure sisteman:\n"
-"\n"
-"%s\n"
-"\n"
-"Zure sare lokala moldagailu horrekin konfiguratzera noa."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Aukeratu zein sare-moldagailu konektatuko den zure sare lokalarekin."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Sareko interfazea konfiguratuta dago"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Kontuz, sare-moldagailua (%s) jadanik konfiguratuta dago.\n"
-"\n"
-"Automatikoki birkonfiguratu nahi duzu?\n"
-"\n"
-"Eskuz egin dezakezu, baldin eta zertan zabiltzan badakizu."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Birkonfigurazio automatikoa"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Erakutsi uneko interfaze-konfigurazioa"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"`%s' - uneko konfigurazioa:\n"
-"\n"
-"Sarea: %s\n"
-"IP helbidea: %s\n"
-"IP atribuzioa: %s\n"
-"Kontrolatzailea: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Uneko konfigurazioa gorde eta DHCP zerbitzari bat konfiguratuta duzula "
-"pentsa dezaket; hala bada, ziurtatu ondo irakurri dudala sare lokalerako "
-"erabiltzen duzun C klaseko sarea; ez dut birkonfiguratuko eta ez dut ukituko "
-"zure DHCP zerbitzariaren konfigurazioa.\n"
-"\n"
-"Gainera, zure interfazea eta DHCP zerbitzaria (bir)konfigura ditzaket.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C klaseko sare lokala"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "DHCP zerbitzariaren IPa"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Birkonfiguratu interfazea eta DHCP zerbitzaria"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Sare lokalak ez du `.0' amaieran; irteten. "
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"LAN helbide-gatazka potentziala aurkitu da %s(r)en uneko konfigurazioan!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Suebaki-konfigurazioa detektatu da!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Kontuz! Lehendik dagoen suebaki-konfigurazio bat detektatu da. Beharbada "
-"eskuz konponketa batzuk egin beharko dituzu instalazioaren ondoren."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Konfiguratzen..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Script-ak konfiguratzen, softwarea instalatzen, zerbitzariak abiarazten..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Arazoa %s paketea instalatzean"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Dena konfiguratu da.\n"
-"Orain Interneteko konexioa konparti dezakezu sare lokaleko beste ordenagailu "
-"batzuekin, sare-konfigurazio automatikoa (DHCP) erabiliz."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Konfigurazioa eginda dago, baina orain desgaituta dago."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Konfigurazioa eginda dago, eta orain gaituta dago."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Interneteko konexioa konpartitzea ez da inoiz konfiguratu."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Interneteko konexioa konpartitzeko konfigurazioa"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Ongi etorri Interneteko konexioa konpartitzeko utilitatera!\n"
-"\n"
-"%s\n"
-"\n"
-"Egin klik 'Konfiguratu'n instalazio-morroia abiarazteko."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Sare-konfigurazioa (%d moldagailuak)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profila: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Ezabatu profila..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Ezabatu beharreko profila:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Profil berria..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Sortu beharreko profilaren izena (profil berria oraingoaren kopia gisa "
-"sortuko da) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ostalari-izena: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Interneterako sarbidea"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Mota:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Atebidea:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interfazea:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Egoera:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Itxaron"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Konfiguratu Interneterako sarbidea..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Sare lokalaren konfigurazioa (LAN)"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Kontrolatzailea"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interfazea"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokoloa"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Egoera"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Konfiguratu sare lokala..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Egin klik hemen morroia abiarazteko ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Morroia..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Aplikatu"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Itxaron... Konfigurazioa aplikatzen"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Konektatuta"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Konektatu gabe"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Konektatu..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Deskonektatu..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Kontuz, beste Internet konexio bat detektatu da, agian zure sarea erabiltzen "
-"ariko da"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Ez duzu interfaze konfiguraturik.\n"
-"Konfigura itzazu lehendabizi, 'Konfiguratu'n klik eginda"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Sare lokalaren konfigurazioa (LAN)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s moldagailua: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Abioko protokoloa"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Abioan abiaraztekoa"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP bezeroa"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktibatu orain"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "desaktibatu orain"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Interfaze hau ez dago konfiguratuta.\n"
-"Abiarazi konfigurazio-morroia leiho nagusian"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Ez duzu Interneteko konexiorik.\n"
-"Sortu bat lehendabizi, 'Konfiguratu'n klik eginda"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Interneteko konexioaren konfigurazioa"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Interneteko konexioaren konfigurazioa"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Konexio-mota: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametroak"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Atebidea"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet txartela"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP bezeroa"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Segurtasun-maila ezartzen"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrol Zentroa"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Aukeratu erabili nahi duzun tresna"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kablea)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "AEB (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "AEB (kablea)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "AEB (kablea-hrc)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Txina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japonia (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japonia (kablea)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europa Ekialdea"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europa Mendebaldea"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Zeelanda Berria"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Hegoafrika"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Idatzi\n"
-"zure TB araua eta estatua"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TB araua :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Area :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "TB kanalak bilatzen..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "TB kanalak bilatzen"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "erabilera: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Aukeratu zure teklatu-diseinua."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Atzera-teklak Ezabatu itzultzea nahi duzu kontsolan?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Aldatu CDROMa"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Sartu instalazioko CDROMa unitatean eta sakatu Ados.\n"
-"Ez baduzu, sakatu Utzi bertsio-berritzea saihesteko."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ezin da bertsio-berritzea abiarazi!!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr "Aldaketa egin da, baina, eragina izan dezan, saioa amaitu behar duzu"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Erakutsi bakarrik hautatutako egunerako"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fitxategia/_Berria"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fitxategia/_Ireki"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fitxategia/_Gorde"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fitxategia/Gorde _honela"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fitxategia/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Aukerak"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Aukerak/Probatu"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Laguntza"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Laguntza/_Honi buruz..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Erabiltzailea"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Mezuak"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandrake Tools-en azalpenak"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "bilatu"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Zure erregistroak ikusteko tresna"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Ezarpenak"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "bat badatoz"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "bat ez badatoz"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Aukeratu fitxategia"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Egutegia"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Fitxategiaren edukia"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Posta/SMSren abisua"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "itxaron, fitxategia analizatzen: %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Posta/SMSren abisuaren konfigurazioa"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Ongi etorri Posta/SMS konfiguratzeko utilitatera.\n"
-"\n"
-"Hemen zure abisu-sistema konfiguratu ahal izango duzu.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "zerbitzuaren ezarpena"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Hautatutako zerbitzuetakoren bat martxan ez badago, abisua jasoko duzu"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "kargatzeko ezarpenak"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Karga balio hau baino handiagoa bada, abisua jasoko duzu"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "abisu-konfigurazioa"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Konfiguratu abisuak jasotzeko modua"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Gorde honela.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Aukeratu sagu-mota."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "ez da serieko USBrik aurkitu\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Hirugarren botoia emulatu?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s aurkitu da hemen: %s. Konfiguratu nahi duzu ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Hautatu eskaner bat"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "%s eskaner hori ez da onartzen"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Abioko gailua"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"%s eskaner hau printerdrake-rekin konfiguratu behar da.\n"
-"Mandrake Kontrol Zentroko Hardwarearen ataletik abiaraz dezakezu "
-"printerdrake."
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Suebakiaren konfigurazioa"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Suebakiaren konfigurazioa"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Suebakia\n"
-"\n"
-"Jadanik konfiguratu duzu suebaki bat.\n"
-"Suebakia aldatzeko edo kentzeko, egin klik 'Konfiguratu'n"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Suebakia\n"
-"\n"
-"Suebaki estandar bat konfiguratzeko, egin klik 'Konfiguratu'n"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Aukeratu hizkuntza"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Hautatu instalazio-klasea"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Disko gogorren detekzioa"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Konfiguratu sagua"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Aukeratu teklatua"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Segurtasuna"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Ezarri fitxategi-sistemak"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Eman formatua partizioei"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Aukeratu instalatu beharreko paketeak"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalatu sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Gehitu erabiltzaile bat"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Konfiguratu sarea"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Konfiguratu zerbitzuak"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instalatu abioko kargatzailea"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Sortu abioko disko bat"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Konfiguratu X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Instalatu sistema-eguneratzeak"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Irten instalaziotik"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall konfiguratzailea\n"
-"\n"
-"Mandrake Linux makina honetarako suebaki pertsonala konfiguratzen du.\n"
-"Suebaki ahaltsuagoa nahi baduzu, begiratu MandrakeSecurity Firewall \n"
-"banaketa espezializatua."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Orain galdera batzuk egingo dizkizugu, Interneteko zein zerbitzutara \n"
-"konektatu nahi duzun jakiteko. Ongi pentsatu erantzun aurretik, \n"
-"zure ordenagailuaren segurtasuna garrantzitsua baita.\n"
-"\n"
-"Horietako zerbitzuren bat erabiltzen ez baduzu, desaktiba\n"
-"ezazu. Konfigurazio hau nahi duzunean alda dezakezu,\n"
-"aplikazio hau berriro exekutatuz!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Internet osotik ikusi behar den web zerbitzari bat daukazu martxan\n"
-"makina honetan? Makina honetatik bakarrik erabili behar den web zerbitzari\n"
-"bat badaukazu, lasai erantzun dezakezu EZ hemen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Izen-zerbitzari bat erabiltzen duzu makina honetan? Izen-zerbitzaririk ez \n"
-"badaukazu ezarrita IP eta zonako informazioa emateko Internet osorako,\n"
-"erantzun EZ.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Secure Shell (ssh) konexioei sartzeko baimena eman nahi diezu? \n"
-"Telnet-en ordezkoa da, urruneko makinetan sartzeko erabil dezakezuna. \n"
-"telnet erabiltzen baduzu, ssh-ra aldatu behar duzu zalantzarik gabe. \n"
-"telnet ez dago enkriptatuta - hortaz, erasotzaileek zure pasahitza lapur \n"
-"dezakete. ssh enkriptatuta dago eta beraz ezin da harrapatu."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"telnet konexioei sartzen utzi nahi diezu?\n"
-"Hori ez da batere batere segurua, aurreko pantailan azaldu dugunez. \n"
-"Biziki gomendatzen dugu hemen EZ erantzutea eta telnet-en ordez ssh\n"
-"erabiltzea.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Internetetik ikusi behar den FTP zerbitzaririk erabiltzen duzu?\n"
-"Horrela bada, biziki gomendatzen dizugu transferentzia anonimoetarako\n"
-"bakarrik erabiltzea. FTP bidez bidalitako pasahitzak lapurtu egin "
-"ditzakete,\n"
-"FTPk ere ez baitu enkriptatzerik erabiltzen pasahitzak transferitzeko.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Posta-zerbitzaririk baduzu martxan hemen? Mezuak pine, mutt edo\n"
-"testuan oinarritutako beste posta-bezeroren baten bidez bidaltzen\n"
-"badituzu, ziur aski izango duzu. Bestela, desaktibatzea komeni da.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"POP edo IMAP zerbitzaririk baduzu hemen? \n"
-"Web-ean oinarritu gabeko posta-kontuen ostalari izateko \n"
-"erabiltzen da hau.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Badirudi 2.2 bertsioko nukleoa erabiltzen duzula. Zure sarearen \n"
-"IP helbidea automatikoki ezartzen badu zure etxeko edo \n"
-"bulegoko ordenagailu batek (dinamikoki esleituta), onartu \n"
-"egin beharko dugu. Horrela da?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Zure ordenagailua beste batekin sinkronizatuta dabil?\n"
-"Nagusiki, hori Unix/Linux antolamendu ertain eta handiek \n"
-"erabiltzen dute, konexio-orduak sinkronizatzeko eta horrelakoetarako. "
-"Bulego handi batean ari ez bazara eta \n"
-"honelako konturik entzun ez baduzu, ziur aski ez zara\n"
-"inorekin sinkronizatuta egongo."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Konfigurazioa osatu da. Diskoan idatziko ditugu aldaketak?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ezin da %s ireki: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ezin da %s idazteko ireki: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Ez, ez dut DHCP behar"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Bai, DHCP behar dut"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Ez, ez dut NTP behar"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Bai, NTP behar dut"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Ez gorde"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Gorde eta irten"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Suebakia konfiguratzeko morroia"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Ez (egin suebakia Internetetik)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Bai (onartu hau suebakian zehar)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Itxaron... instalatutako paketeak egiaztatzen"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Huts egin du beharrezko pakete hauek instalatzean: %s eta Bastille.\n"
-" Saiatu eskuz instalatzen."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Sare-ordenagailua (bezeroa)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS zerbitzaria, SMB zerbitzaria, Proxy zerbitzaria, ssh zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-ren lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Palm Pilot edo Visor-erako tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Suebakia/Bidatzailea"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinu-izenen eta sareko informazioaren zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Bulego-lanetako programak: testu-prozesadoreak (kword, abiword), kalkulu-"
-"orriak (kspread, gnumeric), pdf ikustaileak, etab."
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio tresnak: mp3 edo midi erreproduzigailuak, nahastaileak, etab."
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linux eta Software libreari buruzko liburuak eta azalpenak"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etab."
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Bideoa"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Posta, berriak, web-a, fitxategi-transferentzia eta berriketa kudeatzeko "
-"tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Datu-basea"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL edo MySQL datu-baseen zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Zure ordenagailuaren konfigurazioa errazteko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Soinua"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitateak"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentazioa"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Kontsola-tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix posta-zerbitzaria, Inn berri-zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Interneteko estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimediako estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Konfigurazioa"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Mahaigain grafiko gehiago (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE, K Desktop Environment, hainbat tresna duen oinarrizko ingurune grafikoa."
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Ingurune grafikoa"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "CDak sortzeko eta grabatzeko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Bulegoko lan-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etab."
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "The Gimp bezalako programa grafikoak"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C eta C++ garapen-liburutegiak, programak eta fitxategiak"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Sare-zerbitzaria"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Posta/Groupware/Berriak"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Joko-estazioa"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Bideo-erreproduzigailuak eta editoreak"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafikoak"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Denbora-pasako programak: makina-jokoak, taula-jokoak, estrategiakoak, etab."
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Posta eta berriak irakurtzeko eta bidaltzeko (pine, mutt, tin..) eta web-a "
-"arakatzeko tresnak"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Artxibatzea, emulatzaileak, monitorizatzea"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finantza pertsonalak"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Aplikazio-multzo eta mahaigaineko tresna lagungarri eta atseginak dituen "
-"ingurune grafikoa"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Hainbat protokolotako bezeroak, ssh-renak barne"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Interneteko atebidea"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Soinua eta bideoa jotzeko/editatzeko programak"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Beste mahaigain grafiko batzuk"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editoreak, shell-ak, fitxategi-tresnak, terminalak"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Zure finantzak kudeatzeko programak, hala nola gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Informazio pertsonalaren kudeaketa"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD grabatzea"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Lan-estazio zientifikoa"
diff --git a/perl-install/share/po/fake_c.pl b/perl-install/share/po/fake_c.pl
deleted file mode 100755
index 21cf25b04..000000000
--- a/perl-install/share/po/fake_c.pl
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/usr/bin/perl -lp
-
-s|^(__?\()| $1|; # add a blank at the beginning (?!)
-
-s|_\(\[(.*),\s*(.*),\s*(.*)\]|ngettext($2,$3,$1)|; # special plural form handling
-
-s,\Qs/#.*//,,; # ugly special case
-
-s,(^|[^\$])#([^+].*),"$1/*" . simpl($2) . "*/",e;
- # rewrite comments to C format except for:
- # - ``#+ xxx'' comments which are kept
- # - ``$#xxx'' which are not comments
-
-s|//|/""/|g; # ensure // or not understood as comments
-
-s|$|\\n\\|; # multi-line strings not handled in C
-
-sub simpl {
- local $_ = $_[0];
- s,\*/,,g;
- $_;
-}
diff --git a/perl-install/share/po/fi.po b/perl-install/share/po/fi.po
deleted file mode 100644
index a3cc4183d..000000000
--- a/perl-install/share/po/fi.po
+++ /dev/null
@@ -1,11489 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999, 2002 Mandrakesoft
-# Kim Enkovaara <kim.enkovaara@iki.fi>, 1999, 2000
-# Matias Griese <mahagr@utu.fi>, 2001, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-02-20 22:55EET\n"
-"Last-Translator: Matias Griese <mahagr@utu.fi>\n"
-"Language-Team: Finnish\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Aseta kaikki näytöt erikseen"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Käytä Xinerama-laajennusta"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Määrittele vain kortin \"%s\" (%s) asetukset"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Monen näytön asettaminen"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Järjestelmäsi tukee monen näytön laitteistokokoonpanoa.\n"
-"Mitä haluat tehdä?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Näytönohjain"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Valitse näytönohjain"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Valitse X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Valitse X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X-palvelin"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Mitä versiota XFree-serveristä haluat käyttää?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"Korttisi on tuettu myös XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s laitteistokiihdytetyllä 3D-tuella"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit XFree %s:ssa.\n"
-"HUOMAA, ETTÄ TUKI ON KOKEELLINEN JA VOI JUMITTAA TIETOKONEESI."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s KOKEELLISELLA laitteistokiihdytetyllä 3D-tuella"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Näytönohjaimelle on olemassa laitteistokiihdytetyt 3D-ajurit vain XFree %s:"
-"ssa.\n"
-"HUOMAA, ETTÄ TUKI ON KOKEELLINEN JA VOI JUMITTAA TIETOKONEESI.Korttisi on "
-"tuettu myös XFree %s:ssa, jossa on mahdollisesti parempi 2D-tuki."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (näytönohjaimen ajurin asennus)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFreen asentaminen"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Valitse näytönohjaimen muistin määrä"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Valitse optioita palvelimelle"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Valitse monitori"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Näyttö"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Sinun tulee valita vaakavirkistystaajuus näytöllesi. Voit joko valita "
-"jonkin\n"
-"allaolevista alueista, jotka vastaavat teollisuusstandardityyppejä tai "
-"syöttää\n"
-"jonkin muun alueen.\n"
-"\n"
-"On HYVIN TÄRKEÄÄ, että et valitse näyttötyyppiä, jonka "
-"vaakavirkistystaajuus\n"
-"on suurempi kuin oman näyttösi. Jos epäröit, valitse pienempi taajuus."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Vaakavirkistystaajuus"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Pystyvirkistystaajuus"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Näyttöä ei ole asetettu"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Näytönohjainta ei ole vielä asetettu"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Näytön resoluutiota ei ole vielä valittu"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Haluatko kokeilla asetuksia?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varoitus: näytönohjaimesi testaaminen voi jumittaa tietokoneen"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Kokeile asetuksia"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"kokeile joidenkin parametrien muuttamista"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Tapahtui virhe:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Lopetan %d sekunnissa"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Onko tämä oikea asetus?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tapahtui virhe, kokeile joidenkin parametrien vaihtamista"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resoluutio"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Valitse resoluutio ja värisyvyys"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Näytönohjain: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 palvelin: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Lisäasetukset"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Asiantuntijatila"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Näytä kaikki"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resoluutiot"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Näppäinasettelu: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Hiiren tyyppi: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Hiiren laite: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Näyttö: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Näytön vaakajuovataajuus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Näytön virkistystaajuus: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Näytönohjain: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Näytönohjaimen tunniste: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafiikkamuisti: %s kt\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Värisyvyys: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resoluutio: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 palvelin: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 ajurit: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Valmistelen X-Windowin asetuksia"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Mitä haluat tehdä?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Vaihda näyttöä"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Vaihda näytönohjainta"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Vaihda palvelimen optioita"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Vaihda resoluutiota"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Näytä tiedot"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Kokeile uudelleen"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Lopeta"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Säilytä muutokset?\n"
-"Nykyiset asetukset ovat:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Käynnistettäessä X:ää"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"X voidaan laittaa käynnistymään automaattisesti käynnistyksen yhteydessä.\n"
-"Haluatko käynnistää X:n automaattisesti?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Kirjaudu uudelleen %s:een aktivoidaksesi muutokset"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Kirjaudu ulos ja kirjoita sitten Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 väriä (8 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tuhatta väriä (15 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tuhatta väriä (16 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 miljoonaa väriä (24 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 miljardia väriä (32 bittiä)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kt"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kt"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mt"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mt tai enemmän"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Perus-VGA, 640x480 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "SVGA, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-yhteensopiva, 1024x768 @ 87 Hz lomitettu (ei 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "SVGA, 1024x768 @ 87 Hz lomitettu, 800x600 @ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Laajennettu SVGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Lomittamaton SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Korkeataajuuksinen SVGA, 1024x768 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Näyttö, joka pystyy 1280x1024 @ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Näyttö, joka pystyy 1280x1024 @ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Näyttö, joka pystyy 1280x1024 @ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Näyttö, joka pystyy 1600x1200 @ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Näyttö, joka pystyy 1600x1200 @ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Ensimmäinen sektori käynnistysosiolla"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Levyn ensimmäinen sektori (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILOn asennus"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Minne haluat asentaa käyttöjärjestelmän lataajan?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub asennus"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO tekstipohjaisella valikolla"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO graafisella valikolla"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Käynnistä DOSista/Windowsista (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Käyttöjärjestelmän lataajan pääasetukset"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Käytettävä käyttöjärjestelmän lataaja"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Käyttöjärjestelmän lataajan asennus"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Käynnistyslaite"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ei toimi vanhoissa BIOSeissa)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Tiivis"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "tiivis"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Näyttötila"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Tauko ennen oletusjärjestelmän käynnistystä"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Salasana"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Salasana (uudelleen)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Rajoita komentorivioptioita"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "rajoita"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Tyhjennä /tmp jokaisella käynnistyskerralla"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tarkka muistin koko, jos tarpeen (löydettiin %d Mt)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Käytä montaa profiilia"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Anna muistin koko megatavuina"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Asetus ``Rajoita komentorivioptioita'' ei ole hyödyllinen ilman salasanaa"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Yritä uudelleen"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Salasanat poikkeavat toisistaan"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Käynnistysviesti"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Vapaa Firmware-viive"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Timeout ytimen käynnistyksessä"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Mahdollista käynnistys CD:ltä"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Mahdollista käynnistys OFilta"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Oletuskäyttöjärjestelmä?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Tässä ovat asetustietueet.\n"
-"Voit lisätä uusia tai muuttaa olemassaolevia."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Lisää"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Valmis"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Muokkaa"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Minkä tyyppisen tietueen haluat lisätä"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Muu käyttöjärjestelmä (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Muu käyttöjärjestelmä (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Muu käyttöjärjestelmä (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Kuva"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Juuri"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Liitä"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Luku-kirjoitus"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Taulukko"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Turvaton"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Otsikko"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Oletus"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd:n koko"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "Ei Näyttöä"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Poista tietue"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Tyhjää otsikkoa ei sallita"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Sinun täytyy määritellä ydin"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Sinulla täytyy määritellä juuriosio"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Otsikko on jo käytössä"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Löysin %s %s liitännät"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Onko sinulla muita?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Onko koneessa %s liityntää?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ei"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Kyllä"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Katso laitteistotietoja"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Asetan ajuria %s ohjaimelle %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(moduli %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Mitä %s-ajuria kokeillaan?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Joissakin tapauksissa %s-ajuri tarvitsee lisätietoja toimiakseen kunnolla,\n"
-"joskin tavallisesti se toimii hyvin ilmankin. Haluaisitko antaa ajurille\n"
-"lisämääreitä vai annatko sen itse etsiä tarvitsemansa tiedot? Joskus haku\n"
-"voi jumittaa tietokoneen, mutta se ei aiheuta vahinkoa."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automaattihaku"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Lisäasetukset"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Voit antaa lisäasetuksia modulille %s.\n"
-"Asetukset ovat muotoa ``nimi=arvo nimi2=arvo2 ...''.\n"
-"Esimerkiksi, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Moduulin optiot:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Modulin %s lataaminen epäonnistui.\n"
-"Haluatko yrittää muilla asetuksilla?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "oikeudet X-ohjelmille"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "oikeudet rpm-työkaluihin"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "salli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "oikeudet ylläpidollisiin tiedostoihin"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(lisätty jo %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Salasana on liian yksinkertainen"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Anna käyttäjätunnus"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Käyttäjätunnus saa sisältää vain pieniä kirjaimia, numeroita, `-' ja `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Käyttäjätunnus on jo lisätty"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Lisää käyttäjä"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Lisää käyttäjä\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Hyväksy käyttäjä"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Oikea nimi"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Käyttäjätunnus"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Komentotulkki"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Kuvake"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automaattinen kirjautuminen"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Yksi käyttäjä voidaan asettaa kirjautumaan automaattisesti sisään "
-"tietokoneellesi.\n"
-"Haluatko käyttää tätä ominaisuutta?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Valitse oletuskäyttäjä:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Valitse käytettävä ikkunointijärjestelmä:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Valitse käytettävä kieli."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Voit valita kielet jotka ovat käytettävissä asennuksen jälkeen"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Kaikki"
-
-# Asennuksen sivuvalikko
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Salli kaikille käyttäjille"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Mukautettu"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Ei jaettu"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paketti %s pitää asentaa. Haluatko asentaa sen?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Voit jakaa sekä NFS:llä että Samballa. Kumpaa haluat käyttää"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Pakollinen paketti %s puuttuu"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Peruuta"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Tervetuloa murtautujat"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Huono"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardi"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Korkea"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Korkea"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidi"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Tätä tasoa tulee käyttää varoen. Se tekee järjestelmästäsi helpomman "
-"käyttää,\n"
-"mutta hyvin herkän: sitä ei tule käyttää koneessa joka on kytketty muihin "
-"koneisiin\n"
-"tai Internettiin. Koneessa ei ole salasanoja."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Salasanat ovat nyt käytössä mutta koneen käyttö verkossa ei ole suositeltua."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Tämä on normaaliturvallisuustaso jota suositellaan tietokoneelle jota\n"
-"käytetään Internettiin liitettynä. Järjestelmässä on "
-"turvallisuustarkastuksia."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Tällä turvallisuustasolla järjestelmän käyttö palvelimena on mahdollista.\n"
-"Järjestelmää voidaan käyttää palvelimena joka hyväksyy yhteyksiä monilta\n"
-"asiakkailta. "
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Pohjautuu edelliseen tasoon, mutta järjestelmä on kokonaan suljettu.\n"
-"Turvallisuusasetukset ovat tiukimmillaan."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Valitse turvataso"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Turvataso"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Käytä libsafea palvelimille"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Kirjasto joka suojelee puskurin ylivuoto ja merkkijonon muotovirhehykkäyksiä "
-"vastaan."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Tervetuloa %s kayttojarjestelmanvalitsijaan!\n"
-"\n"
-"Valitse k~^Dytt~^Tj~^Drjestelm~^D yll~^D olevasta listasta tai\n"
-"odota %d sekuntia oletusk~^Dynnistyst~^D.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Tervetuloa GRUB k~^Dytt~^Tj~^Drjestelm~^Dnvalitsijaan!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Kayt~^D %c- ja %c-napp~^Dimi~^D valitaksesi korostetun tietueen"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Paina enter kaynnist~^D~^Dksesi valitun kaytt”j„rjestelm„n, 'e' muokataksesi"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "komennot ennen k„ynnistyst„, tai 'c' komentoriville"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Korostettu tietue k„ynnistet„„n automaattisesti %d sekunnissa."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "ei tarpeeksi tilaa /boot-hakemistossa"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Työpöytä"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Käynnistysvalikko"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Et voi asentaa käyttöjärjestelmän lataajaa partitiolle %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "ohjeita ei ole vielä olemassa.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Käynnistyksen tavan asetus"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Tiedosto"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Tiedosto/_Poistu"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Uuden tyylin kategoroiva tarkkailija"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Uuden tyylin tarkkailija"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Perinteinen tarkkailija"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Perinteinen Gtk+ tarkkailija"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Käytä Auroraa käynnistyksen aikana"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub-tila"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot-tila"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Tällä hetkellä käytössä oleva järjestelmälataaja on %s.\n"
-"Valitse Aseta käynnistääksesi asennusohjelman."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Määrittele"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Järjestelmän tila"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Käytä X-Window-järjestelmää"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ei, en halua autologinia"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Kyllä, haluan autologinin (käyttäjä, ympäristö)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ei voi lukea tiedostoa /etc/inittab: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Gt"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Kt"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mt"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "Tt"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuuttia"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuutti"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekuntia"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Kuvankaappauksia ei voi tehdä ennen osiointia"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Kuvankaappaukset löytyvät asennuksen jälkeen hakemistosta %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Ranska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgia"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "T'sekin tasavalta"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Saksa"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Kreikka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norja"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Ruotsi"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Alankomaat"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italia"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Itävalta"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Yhdysvallat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Tee ensin varmuuskopio tiedoistasi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Lue tarkkaan!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jos aiot käyttää aboot:ia, varmista että jätät vapaata tilaa levyn alkuun\n"
-"(2048 sektoria on tarpeeksi)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Virhe"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Velho"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Valitse toiminta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Sinulla on yksi suuri FAT-osio.\n"
-"(Yleensä Microsoft DOS/Windowsin käytössä).\n"
-"Ehdotus: muuta ensimmäiseksi osion kokoa\n"
-"(klikkaa osiota ja valitse sitten \"Uusi koko\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Klikkaa osiota"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Yksityiskohdat"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journaloitu FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Tyhjä"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Muut"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tiedostojärjestelmien tyypit:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Luo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tyyppi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Käytä sen sijaan ``%s'':ää"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Poista"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Käytä ensin komentoa ``Irroita''"
-
-# mat
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Vaihdettuasi osion %s tyyppiä kaikki sillä olevat tiedot häviävät"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Valitse osio"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Valitse toinen osio"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Poistu"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Vaihda asiantuntijatilaan"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Vaihda normaalitilaan"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Peruuta"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Jatka joka tapauksessa?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Lopeta tallentamatta"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Lopeta kirjoittamatta osiotalua?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Haluatko tallentaa muutokset tiedostoon /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automaattinen varaus"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Tyhjennä kaikki"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Kiintolevyn tiedot"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Kaikki primääriosiot käytetty"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Uusia osioita ei voida lisätä"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Voidaksesi luoda lisää osioita tuhoa yksi olemassaoleva osio jotta voisit "
-"luoda laajennetun osion"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Tallenna osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Palauta osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Pelasta osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Uudelleenlataa osiotaulu"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Vaihdettavan median automaattinen liittäminen"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Valitse tiedosto"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Osiotaulun varmuuskopio ei ole saman kokoinen\n"
-"Jatka silti?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Varoitus"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Aseta levyke asemaan\n"
-"Kaikki levykkeen tiedot häviävät"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Yritän osiotalulun palautusta"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Yksityiskohtaiset tiedot"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Liitospaikka"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Optiot"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Uusi koko"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Siirrä"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Alusta"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Liitä"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Lisää RAIDiin"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Lisää LVM:iin"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Irroita"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Poista RAIDista"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Poista LVM:stä"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Muokkaa RAIDia"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Käytä loopback-tiedostoa"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Luo uusi osio"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Aloitussektori: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Koko Mt: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tiedostojärjestelmä: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Liitospaikka: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Etuoikeus: "
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Poista loopback-tiedosto?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Muuta osiotyyppiä"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Minkä tiedostojärjestelmän haluat?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Vaihdan ext2:sta ext3:een"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Minne haluat liittää loopback-tiedoston %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Minne haluat liittää laitteen %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ei voida poistaa liitospaikkaa koska osiota käytetään loopback-tilassa.\n"
-"Poista loopback-tiedosto ensin"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Lasken FAT-tiedostojärjestelmän rajoja"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Muutan kokoa"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Tämän osion kokoa ei voi muuttaa"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Kaikki osion tiedot tulee varmuuskopioida"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Osion %s koon muuttamisen jälkeen kaikki osion tiedot tuhoutuvat"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Valitse uusi koko"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Uusi koko (Mt): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Mille levylle haluat siirtää?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektori"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Mille sektorille haluat siirtää?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Siirrän"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Siirrän osiota..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Valitse olemassaoleva RAID johon lisätään"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "uusi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Valitse olemassaoleva LVM johon lisätään"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM:n nimi?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Osiota ei voida käyttää loopback-osiona"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Loopback tiedostonimi: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Anna tiedostonimi"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "Tiedosto on jo käytössä toiselle loopbackille, valitse toinen"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Tiedosto on jo olemassa. Käytä sitä?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Liittämisen optiot"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Useita"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "laite"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "taso"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "palan koko"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Varo: tämä on vaarallinen toiminto"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Minkä tyyppinen osiointi?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"/boot hakemistoa ei voida luoda näin kauas levyn alusta (sylinterille joka "
-"on > 1024).\n"
-"Joko käytät LILOa ja se ei toimi, tai et käytä LILOa, jolloin et tarvitse /"
-"boot -hakemistoa"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Osio jolle valitsit juuren (/) on fyysisesti yli 1024 sylinterin levyllä,\n"
-"eikä sinulla ole /boot osiota.\n"
-"Jos haluat käyttää LILO-käynnistyksenhallintaa, lisää Linuxille /boot osio."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Olet valinnut ohjelmallisen RAID-osion juuriosioksi (/).\n"
-"Mikään käynnistyslataaja ei osaa käsitellä tätä ilman /boot -osiota.\n"
-"Lisää /boot -osio, jos haluat käyttää liloa tai grubia"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Levyn %s osiotaulu kirjotetaan levylle!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Sinun täytyy käynnistää kone uudelleen ennen kuin muutos tulee voimaan"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Kaikki osiolla %s olevat tiedot häviävät osion alustuksen yhteydessä"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Alustan"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Alustan loopback-osiota %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Alustan osiota %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Piilota tiedostot"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Siirrä tiedostot uuteen osioon"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Hakemisto %s sisältää jo jotakin tietoa\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Siirrän tiedostoja uudelle osiolle"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopioidaan %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Poistetaan %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "osio %s tunnetaan nyt nimellä %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Laite: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-asema: %s (vain arvaus)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tyyppi: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nimi: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Alkaa: sektori %s\n"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Koko: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoria"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sylinteristä %d sylinteriin %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Alustettu\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Ei alustettu\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Liitetty\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback tiedosto(t):\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Osiolta käynnistetään oletuksena\n"
-" (MS-DOS käynnistys, ei lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Taso %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Palan koko %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-levyt %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-tiedoston nimi: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"On mahdollista, että tämä osio on\n"
-"ajuriosio. Sinun olisi kaiketi\n"
-"parasta jättää se rauhaan.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tämä erityinen Bootsrap-\n"
-"osio on järjestelmäsi\n"
-"kaksoiskäynnistämiseksi.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Koko: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s sylinteriä, %s lukupäätä, %s sektoria\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Tietoja: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-levyt %s\n"
-
-# mat
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Osion tyyppi: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "väylässä %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Optiot: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Tiedostojärjestelmän salausavain"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Valitse tiedostojärjestelmäsi salausavain"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Salausavain on liian yksinkertainen (sen pitää olla ainakin %d merkkiä pitkä)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Salausavaimet eivät täsmää"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Salausavain"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Salausavain (uudelleen)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Muuta tyyppiä"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Klikkaa mediaa"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Hae palvelimet"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s:n alustus %s:ta epäonnistui"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "en osaa alustaa %s:ää tyyppiä %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck epäonnistui virhekoodilla %d tai signaalilla %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "virhe irroitettaessa %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "yksinkertainen"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "palvelin"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Et voi käyttää JFS:ää alle 16 Mt osioilla"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Et voi käyttää ReiserFS:ää alle 32 Mt osioilla"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Liitospaikan pitää alkaa /-merkillä."
-
-# mat
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "On jo olemassa osio, jonka liitospaikka on %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Et voi käyttää LVM loogista taltiota liitekohtana %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Tämän hakemiston pitäisi olla juuritiedostojärjestelmässä"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Tarvitset tähän liitoskohtaan oikean tiedostojärjestelmän (ext2, reiserfs)\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Et voi käyttää salattua tiedostojärjestelmää liitoskohdassa %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Vapaa tila ei riitä automaattiseen varaukseen"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Ei mitään tekemistä"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Virhe kirjoitettaessa tiedostoon %s: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"On tapahtunut virhe - ei löytynyt ainuttakaan laitetta, joille voi luoda "
-"uuden tiedostojärjestelmän. Tarkista laitteistosi korjataksesi ongelman"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Sinulla ei ole yhtään osiota!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-#, fuzzy
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yllä olevassa listassa ovat kiintolevyiltä löytyneet Linux-osiot. Voit pitää "
-"velhon \n"
-"tekemät valinnat, sillä ne sopivat useimpiin asennuksiin. Jos teet "
-"muutoksia,\n"
-"sinun täytyy määritellä vähintään juuriosio (\"/\"). Älä valitse juureksi "
-"liian pientä \n"
-"osiota, sillä silloin kaikkia ohjelmia ei voida asentaa. Jos haluat "
-"tallettaa tiedot \n"
-"erilliselle osiolle, sinun täytyy luoda oma osio myös \"/home\"-"
-"hakemistolle \n"
-"(mikä on mahdollista vain, jos sinulla on enemmän kuin yksi Linux-osio).\n"
-"\n"
-"Jokaisesta osiosta on listattu seuraavat tiedot: \"Nimi\", \"Kapasiteetti"
-"\".\n"
-"\n"
-"\"Nimi\"-kohdan rakenne on: \"Kiintolevyn tyyppi\", \"Kiintolevyn numero"
-"\",\n"
-"\"Osion numero\" (esimerkiksi \"hda1\").\n"
-"\n"
-"\"Kiintolevyn tyyppi\" on \"hd\", jos kiintolevysi on IDE-levy, ja \"sd\", "
-"jos \n"
-"se on SCSI-levy.\n"
-"\n"
-"\"Kiintolevyn numero\" on aina kirjain heti \"hd\":n tai \"sd\":n jälkeen. \n"
-"IDE-asemilla:\n"
-"\n"
-" * \"a\" tarkoittaa \"herraksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-" * \"b\" tarkoittaa \"orjaksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-" * \"c\" tarkoittaa \"herraksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-" * \"d\" tarkoittaa \"orjaksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"SCSI-levyillä \"a\" tarkoittaa \"pienin SCSI ID\", \"b\" taas \"toiseksi "
-"pienin \n"
-"SCSI ID\", jne..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linuxin asennus koostuu useasta CD-ROM-levystä. DrakX\n"
-"tietää, onko valittu paketti toisella CD:llä ja osaa tarvittaessa syöttää\n"
-"nykyisen levyn ulos ja kysyä oikeaa."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Voit nyt valita mitkä palvelut haluat käynnistää konetta käynnistettäessä.\n"
-"\n"
-"Tässä on lista kaikista palveluista, jotka löytyvät nykyisestä "
-"asennuksesta.\n"
-"Käy lista läpi huolellisesti ja poista kaikki ne palvelut, joita ei tarvita "
-"jokaisella\n"
-"käynnistyskerralla.\n"
-"\n"
-"Saat kustakin palvelusta lyhyen kuvaustekstin valitsemalla sen. Jos et\n"
-"kuitenkaan ole varma palvelun hyödyllisyydestä, on yleensä varmempaa\n"
-"jättää se oletusarvoiseksi.\n"
-"\n"
-"!! Tässä vaiheessa sinun pitää olla erityisen huolellinen, jos aiot käyttää\n"
-"konettasi palvelimena: et varmaankaan halua käynnistää niitä palveluita,\n"
-"joita et tarvitse. Muista myös, että jotkin palvelut voivat olla "
-"vaarallisia,\n"
-"jos ne ovat aktivoituja palvelimessa. Yleensä kannattaa valita vain\n"
-"ne palvelut, joita todella tarvitaan.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Kun kokeilet ensimmäistä kertaa X:n asetuksiasi, et ole välttämättä kovin\n"
-"tyytyväinen sen näyttöön (ruutu on liian pieni, siirtynyt vasemmalle tai\n"
-"oikealle...). Vaikka X käynnistyisikin oikein, DrakX kysyy sinulta, "
-"sopivatko\n"
-"asetukset sinulle. Se ehdottaa myös myös muutoksia näyttämällä listan\n"
-"sen löytämistä voimassa olevista näyttötiloista, pyytäen sinua valitsemaan\n"
-"niistä yksi.\n"
-"\n"
-"Jos et millään saa X:ää toiminaan, kannattaa viimeisenä valita \"Vaihda\n"
-"näytönohjain\", sieltä \"Listaamaton kortti\", ja kun sinulta kysytään, "
-"minkä\n"
-"palvelimen haluat, valitse \"FBDev\". Tämä on vikasietoinen valinta, joka\n"
-"toimii kaikilla nykyaikaisilla näytönohjaimilla. Lopuksi valitse \"Testaa\n"
-"uudelleen\" varmistaaksesi toimimisen."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Lopuksi sinulta kysytään, haluatko käynnistyksessä graafisen rajapinnan.\n"
-"Huomaa, että kysymys esitetään vaikka et olisi testannut asetuksia.\n"
-"Haluat varmaankin vastata \"Ei\", jos koneesi on tarkoitettu palvelimeksi\n"
-"tai jos näytön asetus epäonnistui."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Tässä vaiheessa sinun pitää valita mihin haluat asentaa Mandrake Linux\n"
-"-käyttöjärjestelmän. Jos kiintolevysi on tyhjä tai olemassaoleva "
-"käyttöjärjestelmä\n"
-"käyttää kaiken siinä olevan tilan, sinun pitää osioida kiintolevysi. "
-"Yksinkertaistaen\n"
-"kiintolevyn osiointi koostuu levytilan jakamisesta loogisiin osiin tilan "
-"saamiseksi\n"
-"Mandrake Linux -järjestelmälle.\n"
-"\n"
-"Koska osiointiprosessin vaikutukset ovat tavallisesti peruuttamattomia, voi\n"
-"osiointi olla pelottavaa ja stressaavaa kokemattomalle käyttäjälle. Onneksi\n"
-"on olemassa velho, joka on tehty helpottamaan prosessia. Ennen kuin "
-"aloitat,\n"
-"käytä riittävästi aikaa ohjekirjan lukemiseen.\n"
-"\n"
-"Jos asennus on asiantuntijatilassa, pääset DiskDrakeen, Mandrake Linuxin\n"
-"osiointityökaluun, joka antaa sinun hienosäätää osioitasi. Katso tässä "
-"tapauksessa\n"
-"ohjekirjan DiskDrakea koskeva kappale. Voit myös käyttää asennuksen velhoa\n"
-"painamalla dialogin \"Velho\"-painiketta.\n"
-"\n"
-"Jos osiot on jo määritelty, joko edellisessä asennuksessa tai jonkin toisen\n"
-"osiointityökalun toimesta, voit yksinkertaisesti valita niistä ne, joihin "
-"haluat asentaa\n"
-"Linux-järjestelmäsi.\n"
-"\n"
-"Jos osioita ei ole vielä määritelty, sinun pitää luoda ne käyttämällä "
-"velhoa.\n"
-"Riippuen kiintolevyn asetuksista, on käytössä erilaisia vaihtoehtoja:\n"
-"\n"
-" * \"Käytä vapaa tila\": tämä vaihtoehto osioi automaattisesti tyhjät "
-"kovalevyt.\n"
-"Sinua ei vaivata päätäsi sen enempää.\n"
-"\n"
-" * \"Käytä olemassaolevaa osiota\": velho on löytänyt yhden tai useamman\n"
-"olemassaolevan Linux.osion kiintolevylläsi. Jos haluat käyttää niitä, "
-"valitse\n"
-"tämä vaihtoehto.\n"
-"\n"
-" * \"Käytä tyhjää tilaa Windows-osiossa\": Jos Microsoft Windows on "
-"asennettuna\n"
-"kiintolevyllesi ja se käyttää kaiken levyllä olevan tilan, sinun täytyy "
-"tehdä vapaata\n"
-"tilaa Linuxin tiedoille. Tehdäksesi sen, voit tuhota Microsoft Windowsin "
-"käyttämän\n"
-"osion ja tiedot (katso kohta \"Tyhjennä koko lavy\" tai \"Asiantuntijatila"
-"\") tai voit\n"
-"muuttaa Microsoft Windowsin käyttämän osion kokoa. Koon muuttaminen voidaan "
-"tehdä hävittämättä mitään levyllä olevista tiedoista. Tämä vaihtoehto on "
-"suositeltu,\n"
-"mikäli haluat käyttää sekä Mandrake Linuxia että Microsoft Windowsia "
-"samalla\n"
-"tietokoneella.\n"
-"\n"
-" Ennen kuin valitset tämän vaihtoehdon, sinun tulee tietää, että "
-"Microsoft\n"
-"Windowsin käyttämän osion koko pienenee operaarion johdosta. Sinulla tulee\n"
-"siis olemaan nykyistä vähemmän tilaa uusien ohjelmien asentamiseen ja "
-"tietojen\n"
-"tallentamiseen Microsoft Windowsin alla.\n"
-"\n"
-" * \"Tyhjennä koko lavy\": jos haluat tuhota kaikki levyllä olevan tiedon "
-"sekä sillä\n"
-"olevat osiot ja asentaa Mandrake Linux -järjestelmän niiden tilalle, voit "
-"valita\n"
-"tämän vaihtoehdon. Ole varovainen, sillä et pysty enää palauttamaan levyn "
-"sisältöä\n"
-"ennalleen sen jälkeen, kun olet hyväksynyt toiminnon.\n"
-"\n"
-" !! Jos valitset tämän vaihtoehdon, kaikki levylläsi oleva tieto "
-"tuhoutuu. !!\n"
-"\n"
-" * \"Poista Windows\": tämä yksinkertaisesti poistaa kaiken, mitä levyllä "
-"on, ja\n"
-"aloittaa puhtaasti osioimalla kaiken alusta alkaen. Kaikki levyllä oleva "
-"tieto tuhoutuu.\n"
-"\n"
-" !! Jos valitset tämän vaihtoehdon, kaikki levylläsi oleva tieto "
-"tuhoutuu. !!\n"
-"\n"
-" * \"Asiantuntijatila\": jos haluat osioida kiintolevysi itse, voit valita "
-"tämän\n"
-"vaihtoehdon. Ole varovainen - tämä on tehokas, mutta vaarallinen valinta.\n"
-"Voit todella helposti menettää kaiken tiedon. Joten älä valitse tätä "
-"ratkaisua,\n"
-"ellet tiedä, mitä olet tekemässä."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Kaikki vasta määritellyt osiot täytyy alustaa käyttöä varten (alustaminen\n"
-"tarkoittaa tiedostojärjestelmän luontia).\n"
-"\n"
-"Samalla voit haluta alustaa uudelleen myös olemassaolevia osioita\n"
-"poistaaksesi kaiken niissä olevan tiedon. Jos haluat haluat tehdä niin,\n"
-"valitse myös ne osiot.\n"
-"\n"
-"Huomaa, että sinun ei ole pakko alustaa kaikkia jo olemassa olevia\n"
-"osioita. Sinun pitää alustaa ne osiot, joilla käyttöjärjestelmä\n"
-"sijaitsee (kuten \"/\", \"/usr\" ja \"/var\"), mutta voit säilyttää osiot,\n"
-"joilla henkilökohtaiset tiedostosi sijaitsevat (tavallisesti \"/home\").\n"
-"\n"
-"Ole huolellinen osioita valitessasi. Alustamisen jälkeen kaikki tieto\n"
-"valituilla osioilla on poissa eikä niiden palauttaminen enää onnistu.\n"
-"\n"
-"Valitse \"Ok\", kun olet valmis alustamaan osiot.\n"
-"\n"
-"Valitse \"Peruuta\", jos haluat valita toisen osion Mandrake Linuxin\n"
-"asentamiseen.\n"
-"\n"
-"Valitse \"Lisäasetukset\", jos haluat valita osiot, jotka tarkistetaan "
-"levyllä\n"
-"olevien huonojen kohtien varalta."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Uutta Mandrake Linux -käyttöjärjestelmääsi asennetaan parasta aikaa.\n"
-"Asennettavien pakettien määrästä ja koneesi nopeudesta riippuen\n"
-"vie tämä toiminto muutamasta minuutista useaan tuntiin.\n"
-"\n"
-"Kärsivällisyyttä."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Ennen jatkamista sinun pitäisi lukea huolellisesti lisenssin ehdot. "
-"Lisenssi\n"
-"kattaa koko Mandrake Linux -jakelun, ja jos et hyväksy kaikkia ehtoja,\n"
-"paina \"Kieltäydy\"-painiketta joka keskeyttää asennuksen heti. Jatkaaksesi\n"
-"asennusta paina \"Hyväksy\"-painiketta."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Tässä vaiheessa on aika valita tietokoneellesi sopiva turvataso.Yleisesti\n"
-"mitä avoimempi koneesi on ja mitä enemmän tärkeää tietoa on talletettu\n"
-"koneellesi, sitä korkeampi turvatason pitäisi olla. Huomaa kuitenkin, että\n"
-"korkeampi turvallisuustaso saavutetaan yleensä käytettävyyden\n"
-"kustannuksella. Lue MSEC-kappale \"Reference Manualista\" saadaksesi\n"
-"lisää tietoa turvatasojen merkityksestä.\n"
-"\n"
-"Jos et tiedä mitä valita, käytä oletuksena olevaa vaihtoehtoa."
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Tässä vaiheessa sinun pitää valita mille osioille haluat asentaa Mandrake "
-"Linux\n"
-"-käyttöjärjestelmän. Jos osiot on jo määritelty (edellisessä asennuksessa \n"
-"tai jonkin toisen osiointiohjelman toimesta), voit käyttää olemassaolevia "
-"osioita.\n"
-"Muuten kiintolevyosiot täytyy määrittää.\n"
-"\n"
-"\n"
-"Luodaksesi osioita, sinun täytyy ensiksi valita kiintolevy. Voit valita \n"
-"levyn osioitavaksi painamalla \"hda\" ensimmäille IDE-asemalle, \"hdb\"\n"
-"toiselle tai \"sda\" ensimmäiselle SCSI-levylle ja niin edelleen.\n"
-"\n"
-"\n"
-"Osioidaksesi valitun kiintolevyn, voit käyttää seuraavia vaihtoehtoja:\n"
-"\n"
-"\n"
-" * Tyhjennä kaikki: tämä valinta tuhoaa kaikki osiot valitulla "
-"kiintolevyllä.\n"
-"\n"
-"\n"
-" * Automaattinen varaus: Tämä valinta luo automaattisesti Ext2- ja "
-"virtuaalimuistiosiot kiintolevysi käyttämättömästä osasta.\n"
-"\n"
-"\n"
-" * Pelasta osiointitaulu: jos osiointitaulu on vaurioitunut, voit yrittää "
-"toipua vaurioista käyttämällä tätä valintaa.\n"
-" Muista, että tämä toimenpide voi myös epäonnistua.\n"
-"\n"
-"\n"
-" * Peruuta: voit käyttää tätä valintaa peruaksesi tehdyt muutokset.\n"
-"\n"
-"\n"
-" * Palauta: voit käyttää tätä valintaa, jos haluat perua kaikki muutokset "
-"ja palauttaa alkuperäisen osiointitaulun.\n"
-"\n"
-"\n"
-" * Velho: jos haluat käyttää velhoa kiintolevysi osiointiin, voit käyttä "
-"tätä valintaa. Tämä on \n"
-" suositeltu valinta, jos sinulla ei ole paljoa kokemusta osioinnista.\n"
-"\n"
-"\n"
-" * Palauta levykkeeltä: jos olet tallentanut osiointitaulun levykkeelle, "
-"voit palauttaa tallennushetkellä \n"
-" voimassa olleet asetukset.\n"
-"\n"
-"\n"
-" * Tallenna levykkeelle: jos haluat tallentaa osiointitaulun levylle "
-"pystyäksesi palauttamaan sen,\n"
-" voit käyttää tätä valintaa. Suosittelen, että teet tämän ennen kuin "
-"muutat osiointitietoja.\n"
-"\n"
-"\n"
-" * Valmis: kun olet osioinut kiintolevysi, käytä tätä valintaa "
-"tallentaaksesi muutokset levylle.\n"
-"\n"
-"\n"
-"Kun osio on valittuna voit käyttää:\n"
-"\n"
-"\n"
-" * Ctrl-c luodaksesi uuden osion (kun tyhjä osio on valittuna)\n"
-"\n"
-" * Ctrl-d tuhotaksesi osion\n"
-"\n"
-" * Ctrl-m asettaaksesi osion liitoskohdan tiedostojärjestelmässä\n"
-"\n"
-"\n"
-"Mikäli asennat järjestelmää PPC-koneelta, haluat luoda pienen HFS "
-"'bootstrap'-osion, jonka koko on vähintään \n"
-"1 Mt yaboot-järjestelmänlataajan käyttöön. Jos haluat, voit tehdä "
-"tuostaosiosta myös suuremman, sanotaan 50 Mt, \n"
-"käyttääksesi sitä varaytimen ja ramdisk-imagen tallentamiseksi järjestelmän "
-"latauksen hätätilanteita varten."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Kiintolevyltä on löytynyt useampia kuin yksi Microsoft Windows -osio.\n"
-"Valitse niistä se, jonka kokoa haluat muuttaa pystyäksesi asentamaan\n"
-"Mandrake Linuxn tietokoneeseesi.\n"
-"\n"
-"\n"
-"Tiedoksi: jokaisesta osiosta on listattu seuraavat tiedot: \"Nimi Linuxissa"
-"\", \n"
-"\"Nimi Windowsissa\", \"Kapasiteetti\".\n"
-"\n"
-"\n"
-"\"Nimi Linuxissa\" on koodattu seuraavalla tavalla: \"Kiintolevyn tyyppi"
-"\", \n"
-"\"Kiintolevyn numero\", \"Osion numero\" (esimerkiksi \"hda1\").\n"
-"\n"
-"\n"
-"\"Kiintolevyn tyyppi\" on \"hd\" jos kiintolevysi on IDE-levy ja \"sd\" jos "
-"se on\n"
-"SCSI-levy.\n"
-"\n"
-"\n"
-"\"Kiintolevyn kirjain\" on aina kirjain heti \"hd\":n tai \"sd\":n jälkeen. "
-"IDE-asemilla:\n"
-"\n"
-" * \"a\" tarkoittaa \"herraksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-" * \"b\" tarkoittaa \"orjaksi määritelty kiintolevy ensisijaisella IDE-"
-"laitteella\",\n"
-"\n"
-" * \"c\" tarkoittaa \"herraksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-" * \"d\" tarkoittaa \"orjaksi määritelty kiintolevy toissijaisella IDE-"
-"laitteella\",\n"
-"\n"
-"\n"
-"SCSI-levyillä \"a\" tarkoittaa \"ensisijainen kiintolevy\", \"b\" "
-"puolestaan\n"
-"\"toissijainen kiintolevy\", jne...\n"
-"\n"
-"\"Nimi Windowsissa\" on kiintolevysi kirjain Windowsin alla ( ensimmäinen "
-"levy\n"
-"tai osio on nimetty \"C:\":ksi)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Kärsivällisyyttä. Tämä toiminto voi kestää useita minuutteja."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Valitse \"Asenna\", jos sinulla ei ole aikaisempaa versiota Mandrake "
-"Linuxsta\n"
-"asennettuna tai haluat käyttää useaa käyttöjärjestelmää.\n"
-"\n"
-"\n"
-"Valitse \"Päivitä\", jos haluat päivittää olemassaolevan version Mandrake "
-"Linuxsta.\n"
-"\n"
-"\n"
-"Riippuen osaamisestasi GNU/Linux-järjestelmissä, voit valita jonkin "
-"seuraavista tasoista Mandrake Linux -käyttöjärjestelmän asentamiseen tai "
-"päivittämiseen:\n"
-"\n"
-"\n"
-"* Suositeltu: jos et ole ikinä asentanut GNU/Linux-käyttöjärjestelmää, "
-"valitse tämä vaihtoehto.\n"
-" Asennus tulee olemaan helppo ja sinulta tullaan kysymään vain muutama "
-"kysymys.\n"
-"\n"
-"\n"
-"* Mukautettu: jos tunnet GNU/Linuxin tarpeeksi hyvin, voit valita "
-"järjestelmän tyypin käytön mukaan\n"
-" (työasema, palvelin, kehitys). Sinun tarvitsee vastata useampaan "
-"kysymykseen, kuin \"Suositellussa\" asennuksessa,\n"
-" joten sinun täytyy tietää miten GNU/Linux toimii, jos haluat valita tämän "
-"asennusluokan.\n"
-"\n"
-"\n"
-"* Asiantuntija: jos tunnet GNU/Linux-järjestelmän hyvin, voit valita tämän "
-"asennusluokan. Kuten\n"
-" \"Mukautetussa\" asennuksessa, sinun täytyy valita ensisijainen "
-"käyttökohde (työasema,\n"
-" palvelin, kehitys). Tämä asennusluokka tarjoaa joustavimman asennuksen, "
-"mutta jotkin kysymykset\n"
-" voivat osoittautua erittäin vaikeiksi niille, jotka eivät tunne GNU/"
-"Linuxia riittävän hyvin.\n"
-" Älä valitse tätä asennusluokkaa, ellet ole aivan varma, mitä olet "
-"tekemässä."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Tavallisesti DrakX valitsee sinulle oikean näppäimistön (sen mukaan, minkä\n"
-"kielen olet valinnut) ja et edes näe tätä kohtaa. Kuitenkaan sinulla ei "
-"välttämättä\n"
-"ole näppäimistöä, joka vastaa suoraan kieltäsi. Jos olet esimerkiksi "
-"englanninkielinen\n"
-"sveitsiläinen, voit silti haluta sveitsiläisen näppäimistön. Tai jos puhut "
-"Englantia,\n"
-"mutta asut Quebecissä, sinulla voi olla samanlainen tilanne. Molemmissa "
-"tapauksissa\n"
-"sinun pitää palata takaisin kyseiseen asennusvaiheeseen ja valita sopiva "
-"näppäimistö\n"
-"listasta.\n"
-"\n"
-"Paina \"Lisää\"-painiketta saadaksesi täydellisen listan tuetuista "
-"näppäimistöistä. "
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Valitse mieleisesi kieli asennukseen ja järjestelmän käyttöön.\n"
-"\n"
-"Painamalla \"Lisäasetukset\"-painiketta saat mahdollisuuden valita myös\n"
-"muita kieliä asennettavaksi työasemallesi. Muiden kielien valitseminen\n"
-"asentaa kielikohtaiset tiedostot järjestelmän dokumentoinnista ja\n"
-"ohjelmistoista. Esimerkiksi jos sinulla koneessasi Espanjalaisia käyttäjiä,\n"
-"valitse englanti (tai suomi) pääkieleksi ja lisäasetusten puolelta paina\n"
-"harmaata tähteä, joka vastaa Espanjaa.\n"
-"\n"
-"Huomaa, että voit valita useita kieliä. Kun olet valinnut haluamasi "
-"ylimääräiset\n"
-"kielet, paina \"Ok\"-painiketta jatkaaksesi."
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX olettaa yleisesti, että sinulla on kaksinäppäiminen hiiri ja kytkee\n"
-"sen kolmannen näppäimen emulaatiolla. DrakX tietää myös\n"
-"automaattisesti, onko se PS/2, sarja- vai USB-hiiri.\n"
-"\n"
-"Jos haluat asettaa eri tyyppisen hiiren, valitse sopiva tyyppi oheisesta\n"
-"listasta.\n"
-"\n"
-"Jos valitset muun kuin oletushiiren, saat eteesi hiiren testiruudun. Käytä\n"
-"hiiren nappeja ja rullaa varmistaaksesi, että asetukset ovat oikeat. Jos\n"
-"hiiri ei toimi kunnolla, paina välilyöntiä tai enteriä peruttaaksesi, minkä\n"
-"jälkeen voit valita uudelleen."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Valitse oikea portti. Esimerkiksi \"COM1\" portti Windowsissa\n"
-"on nimetty \"ttyS0\":ksi GNU/Linuxissa."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) ja grub ovat järjestelmälataajia: ne voivat\n"
-"käynnistää joko GNU/Linuxin tai mikä tahansa tietokoneellasi olevan\n"
-"käyttöjärjestelmän. Tavallisesti kaikki käyttöjärjestelmät tunnistuvat ja\n"
-"asentuvat oikein. Jos edellinen ei kuitenkaan pidä paikkaansa, voit lisätä\n"
-"kyseisen kohdan käsin tässä ruudussa. Ole huolellinen, että tulet\n"
-"valinneeksi oikeat parametrit.\n"
-"\n"
-"Jos et halua kenenkään pääsevän osaan käyttöjärjestelmistä, voit\n"
-"tuhoa kyseiset kohdat. Mutta että siinä tapauksessa tarvitset itse\n"
-"käynnistyslevykettä päästäksesi kyseisiin käyttöjärjestelmiin!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sinun pitää osoittaa paikka, jonne haluat asettaa tarvittavat tiedot\n"
-"GNU/Linuxin käynnistämiseksi.\n"
-"\n"
-"Jos et tiedä tarkalleen mitä olet tekemässä, valitse \"Levyn ensimmäinen\n"
-"sektori (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX hakee koneeseen asennettuja PCI-väyläisiä SCSI-laitteita. \n"
-"Jos SCSI-laite löytyy ja DrakX tietää mitä ajuria käyttää, laite otetaan \n"
-"automaattisesti käyttöön.\n"
-"\n"
-"\n"
-"Jos tietokoneessasi ei ole SCSI-laitetta tai DrakX ei tunnista sinulla \n"
-"olevaa ISA- tai PCI-väyläistä SCSI-laitetta, DrakX kysyy onko koneessasi\n"
-"SCSI-liityntää. Jos ei, voit vallita \"Ei\". Jos valitset \"Kyllä\", tulee \n"
-"näkyviin lista ajureista, josta voit valita sinulla olevan laitteen.\n"
-"\n"
-"\n"
-"Jos sinun täytyy valita ajuri manuaalisesti, DrakX kysyy, haluaisitko "
-"määrittää\n"
-"sille lisäoptioita. Sinun kannattaa antaa DrakX:n tutkia laitteistosi "
-"optioiden\n"
-"löytämiseksi, sillä yleensä kyseinen toiminto toimii hyvin.\n"
-"\n"
-"\n"
-"Jos ei, sinun pitää itse antaa optiot kyseiselle ajurille. Katso lisätietoja "
-"käyttöohjeesta\n"
-"(luku 3, osa \"Collective informations on your hardware\"), jossa on "
-"vinkkejä\n"
-"miten nämä tiedot löytyvät laitteiston ohjekirjoista, "
-"laittteistovalmistajan\n"
-"webbisivuilta (jos sinulla on internetyhteys) tai Microsoft Windowsista "
-"(jos\n"
-"se on asennettu tietokoneeseesi)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Valitse kiintolevy, jonka haluat tyhjentää uudelle Mandrake Linux -osiolle.\n"
-"Ole varovainen, koska kaikki asemalla oleva tieto tuhoutuu eikä ole enää\n"
-"palautettavissa!"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Paina \"OK\", jos haluat tuhota kaiken tällä kiintolevyllä olevan tiedon\n"
-"sekä osiot. Ole varovainen, sillä painettuasi \"OK\" et voi enää palauttaa\n"
-"mitään tällä kiintolevyllä olleita tietoja ja osioita, mukaanlukien kaikki\n"
-"Windows-tiedostot.\n"
-"\n"
-"Paina \"Peruuta\" keskeyttääksesi tämän toiminnon ilman että menetät\n"
-"mitään kiintolevyllä ollutta tietoa ja osoita."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Sinun täytyy myös alustaa %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Olet valinnut seuraavat palvelimet: %s\n"
-"\n"
-"\n"
-"Nämä palvelimet otetaan oletuksena käyttöön. Niissä ei ole tunnettuja \n"
-"turvallisuusaukkoja, mutta sellaisia voi löytyä ajan mittaan. Mikäli niin \n"
-"tapahtuu, pitäisi sinun päivittää kyseiset palvelimet niin nopeasti kuin \n"
-"suinkin mahdollista.\n"
-"\n"
-"\n"
-"Haluatko todella asentaa nämä palvelimet?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Aseta tyhjä FAT-alustettu levyke levyasemaan %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Tämä levyke ei ole FAT-alustettu"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Käyttääksesi tätä \"tallennetut paketit\" valintaa, käynnistä asennus "
-"optiolla \"linux defcfg=floppy\""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Virhe lukiessa tiedostoa %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Jokin osa laitteistoasi tarvitsee laitteistovalmistajan ajurit toimiakseen "
-"kunnolla.\n"
-"Voit löytää lisätietoja edellämainituista täältä: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sinulla tulee olla juuriosio.\n"
-"Tätä varten luo osio (tai klikkaa olemassaolevaa).\n"
-"Valitse sitten toiminto ``Liitospaikka'' ja aseta se arvoon `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Sinulla tulee olla heittovaihtotiedosto"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Sinulla ei ole heittovaihto-osiota\n"
-"\n"
-"Jatka kuitenkin?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sinulla pitää olla FAT-osio liitettynä hakemistoon /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Käytä tyhjää tilaa"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ei tarpeeksi tilaa uusien osioiden luomiseksi"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Käytä olemassa olevia osioita"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Ei ole olemassa olevaa osiota käytettäväksi"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Käytä Windows-osiota loopback-tiedostona"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Mille osiolle haluat laittaa Linux4Win:in?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Valitse koot"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Juuriosion koko Mt: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Sivutusosion koko Mt: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Käytä tyhjää tilaa Windows-osiolla"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Minkä osion kokoa haluat muuttaa?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Lasken Windows-tiedostojärjestelmän rajoja"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"FAT-järjestelmän koon muuttaja ei osaa käsitellä osiotasi,\n"
-"saatiin seuraava virhe: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Windows-osiosi on liian pirstoutunut, mene Windowsiin ja aja \"defrag\" ensin"
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROITUS!\n"
-"\n"
-"DrakX aikoo nyt muuttaa Windows-osiosi kokoa. Ole varovainen:\n"
-"tämä toimenpide on vaarallinen. Jos et ole vielä tarkistanut \n"
-"Windows-osioitasi, sinun tulisi poistua asennuksesta, ajaa\n"
-"kiintolevyjen tarkistus Windowsissa (sekä mahdollisesti myös\n"
-"eheyttää levyt). Sen jälkeen voit aloittaa asennuksen uudelleen.\n"
-"Samalla suosittelen ottamaan varmuuskopiot tärkeistä tiedoista.Kun olet "
-"varma, paina Ok."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Kuinka paljon tilaa haluat säilyttää Windowsilla"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "osio %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-tiedostojärjestelmän koon muuttaminen epäonnistui: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Ei ole FAT-osioita, joiden kokoa voisi muuttaa tai käyttää loopback-"
-"tiedostoina (tai osiot ovat täynnä)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Tyhjennä koko levy"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Poista Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Sinulla on enemmän kuin yksi kiintolevy. Mille haluat asentaa Linuxin?"
-
-# mat
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "KAIKKI olemassaolevat osiot ja niissä oleva tieto tuhoutuu asemalta %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Mukautettu levyn osiointi"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Käytä fdiskiä"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Voit nyt osioda kiintolevysi %s\n"
-"Kun olet valmis, älä unohda tallettaa asetuksia komennolla `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Sinulla ei ole tarpeeksi tilaa Windows-osiollasi"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ei ole tarpeeksi tilaa asentamiseen"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX-Osiointivelho löysi seuraavat ratkaisut:"
-
-# mat
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Osiointi epäonnistui: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Käynnistän verkkoa"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ajan alas verkkoa"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Tapahtui virhe, sitä ei voida käsitellä kunnolla.\n"
-"Jatka omalla riskilläsi."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Kahdentunut liitospaikka %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Osa tärkeistä paketeista jäi asentamatta loppuun asti.\n"
-"Joko cdrom-asemasi tai levy on viallinen.\n"
-"Tarkista cdrom Linux-koneessa käyttämällä \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-
-# mat
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Tervetuloa %s:n"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ei levykeasemaa käytettävissä"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Siirryn vaiheeseen `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Järjestelmäsi resurssit ovat lopussa. Voit kohdata ongelmia Mandrake Linuxa "
-"asentaessasi.\n"
-"Jos näin tapahtuu, voit kokeilla tekstipohjaista asennusta. Tehdäksesi niin "
-"paina `F1' kun\n"
-"käynnistät asennusohjelmaa CDROM-asemasta. Tämän jälkeen kirjoita `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Asennusluokka"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Valitse yksi seuraavista asennusluokista:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Valitsemiesi ryhmien kokonaiskoko on suunnilleen %d Mt.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Jos haluat asentaa vähemmän kuin tämä koko,\n"
-"valitse prosenttiosuus paketeista jonka haluat asentaa.\n"
-"\n"
-"Pieni prosenttiosuus asentaa vain tärkeimmät paketit,\n"
-"100%% osuus asentaa kaikki paketit."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Sinulla on levyllä tilaa vain %d%% paketeista\n"
-".Jos haulat asentaa vähemmän kuin tämän osan,\n"
-"valitse prosenttiosuus paketeista jotka haluat asentaa.\n"
-"Pieni prosentti asentaa vain tärkeimmät paketit, %d%%\n"
-" prosenttiosuus asentaa niin monta pakettia kuin on mahdollista."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Voit valita paketit tarkemmin seuraavassa vaiheessa"
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Prosenttiosuus asennettavista paketeista"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Pakettiryhmien valinta"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Yksittäisten pakettien valinta"
-
-# mat
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Koko yhteensä: %d / %d Mt"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Viallinen paketti"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nimi: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versio: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Koko: %d Kt\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Tärkeys: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Et voi asentaa tätä pakettia, koska levyllä ei ole tarpeeksi tilaa sen "
-"asentamiseksi"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Seuraavat paketit asennetaan"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Seuraavat paketit poistetaan"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Et voi valita/poistaa tätä pakettia"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Tämä on pakollinen paketti, sitä ei voida poistaa valinnoista"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Et voi poistaa tämän paketin valintaa. Se on jo asennettu"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tämä paketti tulee päivittää\n"
-"Oletko varma että haluat poistaa valinnan?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Et voi poistaa tämän paketin valintaa. Paketti pitää päivittää."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Näytä automaattisesti valitut paketit"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Asenna"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Lataa/Tallenna levykkeelle"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Päivitän pakettien valintaa"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimaalinen asennus"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Valitse asennettavat paketit"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Asennan"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Arvioin aikaa"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Jäljellä "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Valmistelen asennusta"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pakettia"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Asennan pakettia %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Hyväksy"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Hylkää"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vaihda CD-levyä!\n"
-"\n"
-"Aseta CD-levy nimeltään \"%s\" CD-asemaan ja paina Ok kun olet valmis.\n"
-"Jos sinulla ei ole levyä, paina Peruuta välttääksesi asennukset tältä "
-"levyltä."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Jatka kuitenkin?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Tapahtu virhe järjestettäessä paketteja:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Tapahtu virhe asennettaessa paketteja:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varoitus\n"
-"\n"
-"Lue huolellisesti alla olevat ehdot. Jos et ole samaa mieltä kaikkien\n"
-"ehtojen kanssa, sinulla ei ole oikeuksia asentaa seuraavaa CD-levyä.\n"
-"Paina 'Kieltäydyn' jos haluat jatkaa asennusta käyttämättä näitä osia.\n"
-"\n"
-"\n"
-"Jotkin seuraavalla CD-levyllä olevat komponentit eivät ole GPL:n tai \n"
-"vastaavanlaisen lisenssin alaisia. Jokaisen tällaisen komponentin ehdot \n"
-"on määritelty erikseen niiden omien lisenssien mukaan. Tutustu näihin \n"
-"lisensseihin huolellisesti ennen kuin käytät tai levität näitä "
-"komponentteja \n"
-"eteenpäin. Tällaiset lisenssit kieltävät tavallisesti siirtämisen, "
-"kopioimisen\n"
-"(lukuunottamatta varmuuskopioita), uudelleenlevityksen, "
-"käänteissuunnittelun \n"
-"binäärikoodin kääntämisen tai muokkaamisen. Jokainen rike sopimusta \n"
-"vastaan päättää oikeutesi kyseiseen lisenssiin. Ellei ole olemassa "
-"erityisiä \n"
-"ehtoja, jotka sallivat ohjelmiston asentamisen useaan koneeseen tai \n"
-"niiden käyttämistä verkon yli, et saa myöskään tehdä niin. Jos et ole \n"
-"varma kaikista ehdoista, ota yhteys suoraan kyseisen komponentin \n"
-"tekijään tai jakelijaan. Yllä mainittujen komponenttien tai niiden \n"
-"dokumentaation saattaminen kolmannen osapuolen käsiin on tavallisesti \n"
-"kieletty.\n"
-"\n"
-"\n"
-"Kaikki oikeudet seuraavan levyn komponentteihin kuuluvat niiden \n"
-"asianomaisille tekijöille ja ne on suojattu yksityisen omaisuuden ja \n"
-"ohjelmiston tekijänoikeuslakien avulla.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Tapahtui virhe"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Haluatko todella poistua asennuksesta?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Lisenssin hyväksyminen"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Näppäimistö"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Valitse näppäimistösi asettelu."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Tässä on koko lista olemassa olevista näppäimistöistä"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Valitse asennuksen luokka?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Asenna/Päivitä"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Onko tämä asennus vai päivitys?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Suositeltu"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Asiantuntija"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Päivitä"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Päivitä vain paketit"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Valitse hiiren tyyppi."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Hiiren portti"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Mihin sarjaporttiin hiiresi on liitetty."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Näppäinemulaatio"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "2. näppäimen emulaatio"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "3. näppäimen emulaatio"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Asetan PCMCIA kortteja...."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Asetan IDE-levyä"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ei vapaita osioita"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Tarkistan osioita löytääkseni liitoskohdat"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Valitse liitospaikat"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Osiotaulua ei voida lukea, siinä on liikaa virheitä :(\n"
-"Asennusta voidaan jatkaa yrittämällä tyhjentää virheelliset osiot\n"
-"(KAIKKI TIETO tuhoutuu!). Toinen vaihtoehto on kieltää DrakX:ää\n"
-"muokkaamasta osiointitaulua. (virhe on: %s)\n"
-"\n"
-"Hyväksytkö kaikkien osioiden menettämisen?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ei pystynyt lukemaan osiotaulua oikein.\n"
-"Jatka omalla vastuullasi!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Ei vapaata tilaa 1 Mt:n käynnistyslohkoa varten! Asennusta jatketaan, mutta "
-"käynnistääksesi järjestelmän, sinun pitää luoda käynnistyslohko-osio "
-"DiskDrakessa."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Päivitykseen tarvittavaa juuriosiota ei löytynyt"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Juuriosio"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Mikä on järjestelmäsi juuriosio (/) ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sinun tulee käynnistää järjestelmä uudelleen jotta muutokset tulevat voimaan"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Valitse alustettavat osiot"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Tarkista vialliset lohkot?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Alustan osioita"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Luon ja alustan tiedostoa %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Heittovaihtotiedosto ei ole riittävän suuri, suurenna sitä"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Etsin saatavilla olevia paketteja"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Etsin päivitettäviä paketteja"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Järjestelmässäsi ei ole riittävästi tilaa asennukseen tai päivitykseen (%d > "
-"%d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Täydellinen (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimi (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Suositeltu (%dMt)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Lataa tai tallenna pakettien valinta levykkeelle.\n"
-"Muoto on sama kuin auto_install-toiminnon luomilla levykkeillä."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Lataa levykkeeltä"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Ladataan levykkeeltä"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Pakettien valinta"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Aseta levyke, jossa on pakettien valinta"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Tallenna levykkeelle"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Valittu koko on suurempi kuin olemassa oleva levytila"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Asennuksen tyyppi"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Et ole valinnut yhtäkään pakettiryhmää\n"
-"Valitse haluamasti minimaalinen asennus"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "X:llä"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Perusdokumentaation kanssa (suositeltu!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Pienin mahdollinen asennus (erityisesti ei urpmia)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Jos sinulla on kaikki CD.levyt allaolevalta listalta, paina OK.\n"
-"Jos sinulla ei ole mitään levyistä, paina Peruuta.\n"
-"Jos jotkut levyistä puuttuvat, poista niiden valinnat, ja paina OK."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom nimeltään \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Valmistelen asennusta"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Asennan pakettia %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Asennuksen jälkeiset toiminnot"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Aseta käyttämäsi käynnistyslevyke asemaan %s"
-
-# mat
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Aseta moduulien päivityslevyke asemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sinulla on nyt mahdollisuus hakea internetistä ne ohjelmistot, jotka on \n"
-"suunnattu tiedon salakirjoittamiseen.\n"
-"\n"
-"VAROITUS:\n"
-"\n"
-"Näitä ohjelmistoja koskevien eri tasoisten vaatimusten ja eri "
-"lainsäädäntöjen \n"
-"määräysten vuoksi näiden ohjelmistojen asiakkaan ja/tai loppukäyttäjän \n"
-"pitää varmistaa, että hänen maansa lainsäädäntö sallii hänen hakea, "
-"tallentaa \n"
-"ja käyttää näitä ohjelmistoja.\n"
-"\n"
-"Lisäksi asiakkaan ja/tai loppukäyttäjän tulee olla erityisen varmoja siitä, "
-"etteivät \n"
-"he riko maansa lainsäädäntöä vastaan.Mikäli asiakas ja/tai loppukäyttäjä "
-"ei \n"
-"noudata näiden lakien määräyksiä, heille voidaan langettaa vakaviakin \n"
-"rangaistuksia.\n"
-"\n"
-"Missään tilanteissa ei Mandrakesoft tai sen valmistajat ja/tai "
-"jälleenmyyjät \n"
-"ole vastuuvelvollisia erityisiin, epäsuoriin tai satunnaisiin vahinkoihin, "
-"jotka\n"
-"voivat aiheutua (mukaan lukien, mutta ei rajoittuen: tulonmenetykset, \n"
-"yritystoiminnan katkeaminen, kaupallisten tietojen menetys ja muut \n"
-"rahalliset menetykset, sekä mahdolliset vahingonkorvaukset, jotka oikeus \n"
-"päättää langettaa). ohjelmiston käyttämisestä, hallussapidosta, tai "
-"pelkästä \n"
-"internetistä hakemisesta, jossa asiakas ja/tai loppukäyttäjä voi saada \n"
-"haltuunsa nämä ohjelmistot hyväksyttyään tämän sopimuksen.\n"
-"\n"
-"\n"
-"Mihin tahansa tätä sopimusta koskeviin tiedusteluihin, ota yhteys:"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Sinulla on nyt mahdollisuus hakea päivitetyt paketit, jotka on julkaistu\n"
-"jakelun ilmestymisen jälkeen.\n"
-"\n"
-"Saat turva- ja ohjelmistokorjaukset, mutta tarvitset toimivan internet-\n"
-"yhteyden jatkaaksesi.\n"
-"\n"
-"Haluatko asentaa päivitykset ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Otan yhteyttä Mandrake Linuxin sivustolle saadakseni listan olemassaolevista "
-"peileistä"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Valitse peilijärjestelmä josta paketit haetaan"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Yhdistän peilijärjestelmään hakeakseni uusimman pakettilistan"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Mikä on järjestelmäsi aikavyöhyke?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Laitteistokello asetettu GMT-aikaan"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automaattinen kellon synkronisointi (käyttäen NTP:tä)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Ei kirjoitinta"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "Onko sinulla muita?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Johtopäätös"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Hiiri"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Aikavyöhyke"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Kirjoitin"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN-kortti"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Äänikortti"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV-kortti"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Paikalliset tiedostot"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Ylläpitäjän salasana"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Ei salasanaa"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Salasana on liian yksinkertainen (sen tulee olla ainakin %d merkkiä pitkä)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Tunnistustapa"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Tunnistus LDAPilla"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP perus-dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Tunnistus NIS:llä"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS-alue"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS-palvelin"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Mukautetulla käynnistyslevykkeellä voit käynnistää järjestelmän ilman\n"
-"tavanomaisen käyttöjärjestelmälataajan apua. Tästä on hyötyä, jos et halua\n"
-"asentaa SILOa järjestelmääsi, toinen käyttöjärjestelmä poistaa SILOn,\n"
-"tai SILO ei toimi laitteistossasi. Mukautettua käynnistyslevykettä voidaan\n"
-"käyttää myös Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
-"järjestelmän virhetilanteista on helpompi toipua.\n"
-"\n"
-"Jos haluat luoda käynnistyslevykkeen järjestelmääsi, aseta levyke\n"
-"ensimmäiseen asemaan ja paina \"Ok\","
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Ensimmäinen levyasema"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Toinen levyasema"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Ohita"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Mukautetulla käynnistyslevykkeellä voit käynnistää järjestelmän ilman\n"
-"tavanomaisen käyttöjärjestelmälataajan apua. Tästä on hyötyä, jos et halua\n"
-"asentaa LILOa (tai grubia) järjestelmääsi, toinen käyttöjärjestelmä poistaa\n"
-"LILOn, tai LILO ei toimi laitteistossasi. Mukautettua käynnistyslevykettä "
-"voidaan\n"
-"käyttää myös Mandraken vikasietolevykkeen kanssa, jolloin vakavista\n"
-"järjestelmän virhetilanteista on helpompi toipua.\n"
-"Haluatko luoda käynnistyslevykkeen järjestelmääsi?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Levyajuria ei ole saatavilla"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Valitse levyasema jolla luot käynnistyslevykkeen"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Aseta levyke asemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Luon käynnistyslevykettä"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Valmistelen käyttöjärjestelmän lataajaa"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Sinulla on vanhanaikainen tai tuntematon tietokone,\n"
-"joten yaboot järjestelmänlataaja ei toimi koneessasi.\n"
-"Asennus jatkuu, mutta sinun täytyy käyttää BootX:ää\n"
-"koneesi käynnistämiseen"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Haluatko käyttää aboot:ia?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Virhe asennettaessa aboot:a,\n"
-"yritä pakkoasennusta vaikka se tuhoaa ensimmäisen osion?"
-
-# Asennuksen sivuvalikko
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Asennan käyttöjärjestelmän lataajaa"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Järjestelmälataajan asennus epäonnistu. Seuraava virhe tapahtui:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sinun pitää ehkä muuttaa Open Firmware -käynnistyslaitetta\n"
-"aktivoidaksesi järjeslelmälataajan. Jos et näe järjeslelmälataajaa\n"
-"käynistäessäsi konettasi uudelleen, Paina Command-Option-O-F\n"
-"käynnistyksen yhteydessä ja kirjoita:\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"sitten kirjoita: shut-down\n"
-"Seuraavalla käynnistyskerralla sinun pitäisi nähdä käynnistyslataajan\n"
-"komentokehoite."
-
-# mat
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Aseta tyhjä levyke levyasemaan %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Valmistelen automaattiasennuslevykettä"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Joitain vaiheita ei ole saatettu loppuun.\n"
-"\n"
-"Haluatko todella lopettaa?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Onnittelut, asennus on valmis.\n"
-"Poista käynnistettävä media ja paina Enter käynnistääksesi koneen "
-"uudelleen.\n"
-"\n"
-"\n"
-"Löydät tähän Mandrake Linuxin versioon olemassaolevat korjaukset ja\n"
-"korjattujen virheiden listan osoitteesta:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Järjestelmän asettamisesta saat tietoja virallisen Linux Mandraken\n"
-"käyttäjäoppaan jälkiasennuskappaleesta."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Valmistelen automaattista asennuslevykettä"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Automaattinen asennus voi olla täysin automatisoitu,\n"
-"jos niin halutaan. Siinä tapauksessa asennus täyttää\n"
-"koko kiintolevyn! (tarkoitettu toisen koneen asentamiseksi),\n"
-"\n"
-"Ehkä haluat mieluummin toistaa asennuksen.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automaattinen"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Toista"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Yksittäisten pakettien valinta"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Asennus %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> vaihtaa elementtiä | <Space> valitsee | <F12> seuraava "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu puuttuu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Valitse tiedosto"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Lisäasetukset"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Perusasetukset"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Odota hetki"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Tietoja"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Laajenna puu"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sulje puu"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Vaihda tasaisen ja ryhmäjärjestyksen välillä"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Huono valinta, yritä uudelleen\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Valintasi? (oletus %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Kohdat, jotka sinun pitää täyttää:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Valintasi? (0/1, oletus '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Painike '%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Haluatko klikata tätä painiketta? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Valintasi? (oletus '%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> On monta asiaa, joista valita (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Valitse ensimmäinen numero 10-välistä, jota haluat muokata,\n"
-"tai paina vain Enter jatkaaksesi.\n"
-"Valintasi? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Huomaa, nimike vaihtui:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Lähetä uudelleen"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Tsekki (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Saksa"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espanja"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Suomi"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Ranska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norja"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Puola"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Venäjä"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Ruotsi"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK näppäimistö"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US näppäimistö"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albaani"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armeenia (vanha)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armeenia (kirjoituskone)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armeenia (foneettinen)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgia"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgaria (foneettinen)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaria (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasilia"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Valkovenäjä"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Sveitsi (Saksalainen järjestys)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Sveitsi (Ranskalainen järjestys)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Tsekki (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Saksa (ei kuolleita näppäimiä)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Tanska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Norja (Dvorak)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Ruotsi)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eesti"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgia (\"Venäläinen\"-järjestys)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgia (\"Latin\"-järjestys)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Kreikka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Unkari"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Kroatia"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israeli"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israeli (Foneettinen)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iran"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islanti"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italia"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japani 106-näppäiminen"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korealainen näppäimistö"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinalainen amerikka"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Liettua AZERTY (vanha)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Liettua AZERTY (uusi)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Liettua \"numerorivi\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Liettua \"foneettinen\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvia"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonia"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Hollanti"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Puola (qwerty järjestys)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Puola (qwertz järjestys)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugali"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanada (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Romania (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Romania (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Venäjä (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenia"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakia (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakia (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Serbia (cyrillic)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "Tamil"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Thai-näppäimistö"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik-näppäimistö"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turkki (perinteinen \"F\"-malli)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turkki (perinteinen \"Q\"-malli)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukraina"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US näppäimistö (kansainvälinen)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamilainen \"numerorivi\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavia (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-#, fuzzy
-msgid "Left \"Windows\" key"
-msgstr "Hae Windowsin kirjasimet"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Rengasmaisia liitoksia %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Poista loogiset osiot ensin\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr "PCMCIA:ta ei tueta enää 2.2-sarjan ytimissä. Käytä 2.4 ydintä."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - Hiiri"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Yleinen PS2 rullahiiri"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 näppäin"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Yleinen 2-nappinen hiiri"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Yleinen"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rulla"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "sarja"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Yleinen 3-nappinen hiiri"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sarja, vanha C7 tyyppi)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "väylähiiri"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 näppäintä"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 näppäintä"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ei mikään"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ei hiirtä"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Testaa hiiri"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Aktivoidaksesi hiiren,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "PYÖRITÄ HIIREN RULLAA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Loppu"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Seuraava ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Edellinen"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Onko tämä oikein?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Ota yhteys internettiin"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Yleisin tapa liittyä asdl-verkkoon on käyttää pppoe:a.\n"
-"Jotkin yhteydet käyttävät pptp:tä, muutamat dhcp:tä.\n"
-"Jos et tiedä, mitä valita, valitse 'käytä pppoe:a'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "käytä dhpc:tä"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "käytä pppoe:a"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "käytä pptp:tä"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Mitä dhcp-asiakasohjelmaa haluat käyttää?\n"
-"Oletus on dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Ethernet-verkkokorttia ei löytynyt järjestelmästä.\n"
-"Ei voida asentaa tämän tyyppistä yhteyttä."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Valitse verkkoliittymä"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Valitse mitä verkkokorteista haluat käyttää internetiin liittymiseen"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "verkkokorttia ei löytynyt"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Asetan verkkoa"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Syötä koneesi nimi, jos tiedät sen.\n"
-"Jotkin DHCP-palvelimet tarvitsevat koneen nimen toimiakseen.\n"
-"Koneesi nimen pitäisi olla täysin laillinen nimi, kuten\n"
-"\" minunkone.omapaikka.net\"."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Koneen nimi"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Verkkoasetusten velho"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Ulkoinen ISDN-modeemi"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Sisäinen ISDN-kortti"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Minkälainen ISND-yhteytesi on?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Mitä ISDN-asetuksia haluat käyttää?\n"
-"\n"
-"* Vanha asetusjärjestelmä käyttää isdn4net:iä. Se sisältää tehokkaat\n"
-" työkalut, mutta on vaikea asettaa, eikä se ole standardi.\n"
-"\n"
-"* Uusi asetusjärjestelmä on helpompi ymmärtää, enemmän käytöss',\n"
-" mutta se sisältää vähemmän työkaluja.\n"
-"\n"
-"Suositus on käyttää uutta ja kevyempää asetusjärjestelmää.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Uusi kokoonpano (isdn-kevyt)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Vanha kokoonpano (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN:n asetus"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Valitse palveluntarjoajasi.\n"
-" Jos se ei ole listassa, valitse `Ei listattu'"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Eurooppalainen protokolla"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Eurooppalainen protokolla (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Muun maailman käyttämä protokolla"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Muun maailman käyttämä protokolla \n"
-" ei D-kanavaa (leased lines)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Mitä protokollaa haluat käyttää?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Millainen kortti sinulla on?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "En tiedä"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Jos sinulla on ISA-kortti, seuraavien arvojen pitäisi olla oikeat.\n"
-"\n"
-"Jos sinulla on PCMIA-kortti sinun täytyy tietää korttisi IRQ ja IO.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Hylkää"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Jatka"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Mikä ISDN-kortti sinulla on?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Olen havainnut ISDN PCI-kortin, mutta en tunnista tyyppiä. Valitseyksi "
-"seuraavassa ruudussa olevista korteista."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ISDN PCI-korttia ei löydetty. Valitse yksi seuraavasta ruudusta."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Valitse sarjaportti, johon modeemisi on kytketty."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Soittoasetukset"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Yhteyden nimi"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Puhelinnumero"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Käyttäjä ID"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-pohjainen"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminaalipohjainen"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Verkkoalueen nimi"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Ensimmäinen nimipalvelin (ei pakollinen)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Toinen nimipalvelin (ei pakollinen)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko katkaista yhteyden tai asettaa sen uudelleen."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Voit asettaa yhteytesi uudelleen."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Olet parasta aikaa yhteydessä internettiin."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Voit joko ottaa yhteyden internettiin tai asettaa yhteyden uudelleen."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Et ole juuri nyt yhteydessä internettiin."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Ota yhteys"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Katkaise yhteys"
-
-# Asennuksen sivuvalikko
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Aseta verkkoyhteys"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internetyhteyden muodostus ja asetukset"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Asetamme seuraavaksi %s-yhteyden."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Asetamme seuraavaksi %s-yhteyden.\n"
-"\n"
-"\n"
-"Paina Ok jatkaaksesi."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Verkon asetukset"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Koska asennat käyttöjärjestelmää verkon yli, verkkon asetukset ovat jo "
-"tehty.\n"
-"Paina Ok säilyttääksesi nykyiset asetukset tai peruuta asettaaksesi "
-"internet- ja verkkoasetukset uudelleen.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Tervetuloa verkon asettamisvelhoon\n"
-"\n"
-"Seuraavassa vaiheessa määritellään sinun internet- / verkkoasetukset.\n"
-"Jos et halua käyttää automaattista tunnistusta, poista kyseinen valinta.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Valitse uusi asetusprofiili"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Käytä automaattista tunnistusta"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Etsin laitteita...."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Tavallinen modeemiyhteys"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "löydetty portista %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN-yhteys"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "löydetty %s:sta"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL-yhteys"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "löydetty seuraavasta liitännästä: %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kaapeliyhteys"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Kaapeliyhteys havaittu"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Lähiverkko"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "seuraavat ethernet-verkkokortit löydetty"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Valitse yhteys, jonka haluat asettaa"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Olet asettanut useita eri tapoja ottaa yhteys internetiin.\n"
-"Valitse se, jota haluat käyttää.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internetyhteys"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Haluatko ottaa yhteyden koneen käynnistyksen yhteydessä?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Verkon asetukset"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Verkko pitää käynnistää uudelleen"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ongelma käynnistettäessä verkkoa uudelleen: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Onnittelut, verkko- ja internetyhteyksien asetus valmis.\n"
-"\n"
-"Asetukset tulevat käyttöön myös itse järjestelmässä.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Kun tämä on tehty, suosittelemme käynnistämään X-ympäristön\n"
-"uudelleen välttääksesi järjestelmän nimen vaihdoksesta tulevat ongelmat."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Ongelmia asettamisen aikana.\n"
-"Testaa yhteytesi net_monitor- tai mcc-työkalulla. Jos yhteytesi ei toimi, "
-"voit käynnistää asetustyökalun uudelleen"
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"VAROITUS: Tämä laite on aikaisemmin määritelty internetyhteyden ottoon.\n"
-"Hyväksy, jos haluat pitää laitteen asetukset sellaisina, kun ne olivat.\n"
-"Alla olevien kohtien muokkaaminen korvaa voimassa olevat asetukset."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Anna koneen IP-asetukset. Kukin kohta tulee syöttää IP-osoitteena,\n"
-"pisteillä eroteltuna nelinumeroisena lukuna (esim. 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Asetan verkkolaitetta %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (ajuri %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP-osoite"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Verkkopeite"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automaattinen IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-osoitteen tullee olla muotoa 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Syötä koneesi nimi.\n"
-"Koneesi nimen pitäisi olla täydellinen, kuten ``minunkone.yritys.fi''.\n"
-"Voit antaa myös yhdyskäytävän IP-osoitteen jos sinulla on sellainen."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Nimipalvelin"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Yhdyskäytävä (esim. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Yhdyskäytävän laite"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Proxyjen asettaminen"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP-välityspalvelin:"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP-välityspalvelin:"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Selvitä verkkokortti-id (hyödyllistä sylimikroille)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Välityspalvelimen tulee olla muotoa http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Välityspalvelimen tulee olla muotoa ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Internetin asetukset"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Haluatko kokeilla internetyhteyttä nyt?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testaan yhteyttäsi..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Järjestelmä on nyt internetissä."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Turvallisuussyistä yhteys suljetaan nyt."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Järjestelmä ei näytä olevan internetissä.\n"
-"Yritä muuttaa internet-asetuksia."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Yhteyden asetus"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Valitse alla olevista kohdista"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "Kortin IRQ"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Kortin muisti (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "Kortin IO"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "Kortin IO_0"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "Kortin IO_1"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Henkilökohtainen puhelinnumerosi"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Palveluntarjoajan nimi (esim: tarjoaja.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Palveluntarjoajan puhelinnumero"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Yhteydentarjoajan dns 1 (vapaaehtoinen)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Yhteydentarjoajan dns 2 (vapaaehtoinen)"
-
-# Asennuksen sivuvalikko
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Valitse maasi"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Soittotila"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Yhteyden nopeus"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Yhteyden aikaraja (sekunneissa)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Käyttäjätunnus (käyttäjän nimi)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Salasana"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "liittäminen epäonnistui: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Laajennettua osiotyyppiä ei ole tuettu tässä ympäristössä"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Sinulla on reikä osiotaulussasi eikä sitä voida käyttää.\n"
-"Ainoa ratkaisu on siirtää primääriosioita siten että reikä on ennen "
-"laajennettuja osioita"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Palautus tiedostosta %s epäonnistui: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Huono varmuuskopiotiedosto"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Virhe kirjoitettaessa tiedostoon %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Jotakin kamalaa on tapahtunut kiintolevyllesi.\n"
-"Tiedon oikeellisuuden tarkistus epäonnistui.\n"
-"Kaikki asemalle kirjoitettu tieto muuttuu tunnistamattomaksi"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "pakollinen"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "tärkeä"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "erittäin hyvä"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "hyvä"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "ehkä"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Paikallinen tulostin"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Ulkoinen tulostin"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Tulostin ulkoisella CUPS-palvelimella"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Tulostin ulkoisella lpd-palvelimella"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Verkkotulostin (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tulostin SMB/Windows 95/98/NT -palvelimella"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Tulostin NetWare-palvelimella"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Syötä tulostinlaitteen osoite (URI)"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Putkita työ käskylle"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Tuntematon malli"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Paikalliset tulostimet"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Ulkoiset tulostimet"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " rinnakkaisliitännässä \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", USB tulostin \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", monikäyttölaite rinnakkaisportissa \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", monikäyttölaite USB:ssa"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", monitoimilaite HP JetDirectissä"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", monitoimilaite"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", tulostetaan: %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "LPD-palvelimella \"%s\", tulostin \"%s\""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP -verkkopäätteellä \"%s\", portissa %s"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "Windows-palvelimella \"%s\", jako \"%s\""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "Novell-palvelimella \"%s\", tulostin \"%s\""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", käyttäen komentoa %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raakatulostin (ei ajuria)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(%s:ssa)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(tällä koneella)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-palvelimella \"%s\""
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Oletus)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Valitse tulostinyhteys"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Miten tulostin on liitetty?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Tulostimia, jotka ovat ulkoisella CUPS-palvelimella, ei tarvitse asettaa\n"
-"tässä; nämä tulostimet tunnistetaan automaattisesti."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Asetustyökalut"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Ulkoinen CUPS-palvelin"
-
-#: ../../printerdrake.pm_.c:71
-#, fuzzy
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"CUPS-etäpalvelimilla sinun ei tarvitse asettaa tulostinta tässä; CUPS-"
-"palvelimet kertovat niillä olevat tulostimet itse koneellesi. Kaikki tällä "
-"hetkellä tunnetut tulostimet on listattu \"Oletustulostin\" -kentässä. "
-"Valitse sieltä koneesi oletustulostin ja paina \"Toteuta/Lue uudelleen "
-"tulostimet\" -painiketta. Klikkaamalla samaa painiketta voit myös virkistää "
-"listan (CUPS-tulostimet ilmestyvät 30 sekunnin sisällä). Kun CUPS-"
-"pelvelimesi on eri aliverkossa, sinun pitää antaa CUPS-palvelimesi IP-osoite "
-"ja mahdollisesti myös portin numero saadaksesi tiedot palvelimelta. Muussa "
-"tapauksessa jätä kentät tyhjiksi."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP-osoitteen tullee olla muotoa 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Portin numeron pitäisi olla kokonaisluku!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "CUPS-palvelimen IP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Portti"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "CUPSin automaattinen asettaminen"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Etsin laitteita ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Kokeile portteja"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Lisää uusi tulostin"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Paikallinen tulostin"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Etsi tulostimet"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Tulostimien automaattinen löytäminen"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Tee automaattinen tunnistus"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Aseta tulostin manuaalisesti"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Löydetty %s:sta"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Tulostin rinnakkaisportissa \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "USB-tulostin \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Sinun täytyy syöttää laitteen tai tiedoston nimi!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Paikallisia tulostimia ei löytynyt!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"Seuraava tulostin löydettiin, jos se ei ole se, jonka haluat asettaa, syötä "
-"laite- tai tiedostonimi syöteriville"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Tässä on lista löydetyistä tulostimista. Valitse se tulostin, jonka haluat "
-"asettaa tai syötä laite- tai tiedostonimi syöteriville"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Valitse portti, johon tulostimesi on kytketty tai syötä laitteen tai "
-"tiedoston nimi syöteriville"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Valitse portti, johon tulostimesi on kytketty."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Rinnakkaisportit: /dev/lp0, /dev/lp1, ..., vastaavat LPT1:, LPT2:, ..., 1. "
-"USB-tulostin: /dev/usb/lp0, 2. USB-tulostin: /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Sinun täytyy valita tai syöttää tulostinlaite!"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Manuaalinen asettaminen"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Asennetaan HPOJ-pakettia..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Tarkistetaan laite ja asetetaan HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Asennetaan SANE-paketteja..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Skannataan HP-monikäyttölaitteella"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Asetetaan tulostusportti CUPSin saataville..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Luetaan tulostintietokantaa ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Ulkoisen lpd-palvelimen tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Jotta voisit käyttää ulkoista lpd-tulostinta, sinun pitäisi syöttää "
-"tulostuspalvelimen verkkonimi sekä tulostimen nimi kyseisellä palvelimella."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Palvelimen verkkonimi"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ulkoisen tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Palvelimen verkkonimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Ulkoisen tulostimen nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) -tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"SMB-palvelimen tulostimelle tulostaaksesi sinun pitäisi syöttää SMB-koneen "
-"nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja mahdollisesti "
-"tulostuspalvelimen IP-osoite, tulostimen jakonimi sekä soveltuva "
-"käyttäjätunnus, salasana ja työryhmä-tieto."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB-palvelimen nimi"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "SMB-palvelimen IP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Jakonimi"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Työryhmä"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Joko palvelimen nimi tai IP-numero on annettava!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Samba-jaon nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "NetWare-palvelimen tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare-palvelimen tulostimelle tulostaaksesi sinun pitäisi syöttää NetWare-"
-"palvelinkoneen nimi (joka ei aina ole sama kuin koneen TCP/IP nimi!) ja "
-"mahdollisesti tulostusjonon nimi sille tulostimelle, jota haluat käyttää, "
-"sekä soveltuva käyttäjätunnus ja salasana."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Tulostuspalvelin"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Tulostusjonon nimi"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "NCP-palvelimen nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "NCP-jonon nimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket -tulostimen parametrit"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Tulostaaksesi TCP- tai socket-tulostimella, sinun täytyy antaa tulostimen "
-"verkkonimi ja mahdollisesti portin numero. HP JetDirect-palvelimissa "
-"porttinumero on useimmiten 9100, muissa palvelimissa portti voi vaihdella. "
-"Tarkista portti laitteistosi ohjekirjasta."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Tulostinlaitteen verkkonimi"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Tulostinlaitteen verkkonimi puuttuu!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Tulostinlaitteen osoite (URI)"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Sinun pitää syöttää laillinen URI!"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Kuvaus"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Paikka"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Valmistellaan tulostintietokantaa ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Ulkoisen tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Onko tämä oikein?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Valitse käyttäjät yksitellen"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Tulostimen mallin valinta"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Mikä tulostinmalli sinulla on?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinterin asettaminen"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjetin asettaminen"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valitsimen %s pitää olla kokonaisluku!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valitsimen %s pitää olla luku!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valitsin %s on arvoalueensa ulkopuolella!"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Haluatko asettaa tämän tulostimen (\"%s\")\n"
-"oletustulostimeksi?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testisivut"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Ei testisivuja"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Tulosta"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardi testisivu"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Vaihtoehtoinen testisivu (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Vaihtoehtoinen testisivu (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Valokuvatestisivu"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Älä tulosta testisivua"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Tulostan testisivu(j)a..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testisivu(t) on lähetetty tulostimelle.\n"
-"Voi kestää hetken ennen kuin tulostus alkaa.\n"
-"Tulostuksen tila:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testisivu(t) on lähetetty tulostimelle.\n"
-"Voi kestää hetken ennen kuin tulostus alkaa.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Toimiko tulostus kunnolla?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Raakatulostin"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Saadaksesi selville nykyisen tulostimen parametrit lue joko alla oleva lista "
-"tai klikkaa \"Tulostuksen valintalista\"-painiketta.%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Tässä on lista nykyisen tulostinen käytössä olevista tulostusvalinnoista:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Tulostaaksesi tiedoston komentoriviltä (pääteikkunasta) käytä komentoa \"%s "
-"<tiedosto>\".\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Saadaksesi listan nykyisen tulostimen parametreistä klikkaa \"Tulostuksen "
-"valintalista\"-painiketta."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Tulostaaksesi tiedoston komentoriviltä (pääteikkunasta) käytä komentoa \"%s "
-"<tiedosto>\". tai \"%s <tiedosto>\".\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Sulje"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tulostetaan/skannataan laitteella \"%s\""
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tulostus käynnissä tulostimella \"%s\""
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Tulostusparametrien lista"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Luetaan tulostimen tietoja ..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Siirrä tulostimen asetukset"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ja LPRng eivät tue IPP-tulostimia.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Älä siirrä tulostimia"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Siirrä"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Tulostimen nimi saa sisältää vain kirjaimia, numeroita ja alaviivan"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tulostin \"%s\" on jo olemassa,\n"
-"haluatko todellakin tuhota olemassa olevat asetukset?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Uuden tulostimen nimi"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Siirrän %s ..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Päivitetään tulostintietoja ..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Ulkoisen tulostimen asetukset"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Luon verkkoyhteyttä ..."
-
-# Asennuksen sivuvalikko
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Aseta verkkoyhteys nyt"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Verkkotoimintoja ei ole asetettu"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Jatka asettamatta verkkoyhteyttä"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Käynnistän tulostusjärjestelmää uudelleen ..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "korkea"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoidi"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Asennan tulostusjärjestelmän turvatasolla %s"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Käynnistää tulostusjärjestelmän käynnistyksen aikana"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Tarkistan asennetut ohjelmistot..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Poistetaan LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Poistetaan LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Valitse tulostusjono"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Mitä tulostusjärjestelmää (jonoa) haluat käyttää?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Asetetaan tulostinta \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Asennan Foomaticin ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Tulostimen asetukset"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Valmistellaan PrinterDrakea ..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Asetetaan tulostinta \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Haluatko asettaa tulostuksen?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Tulostusjärjestelmä: "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Päivitä tulostinlistaa (näytä kaikki saatavilla olevat CUPS-etätulostimet)"
-
-# Asennuksen sivuvalikko
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Aseta tulostusjärjestelmä"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Perustila"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Haluatko asettaa toisen tulostimen?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Muokkaa tulostimen asetuksia"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tulostin %s\n"
-"Mitä haluat muokata tästä tulostimesta?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Tee se!"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Tulostusyhteyden tyyppi"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Tulostimen nimi, kuvaus, paikka"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Tulostimen valmistaja, malli, ajuri"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Tulostimen valmistaja, malli"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Aseta tämä tulostin oletukseksi"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Tulosta testisivut"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Tiedä kuinka käyttää tätä tulostinta"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Poista tulostin"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Poistetaan vanha tulostin \"%s\" ..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Oletustulostin"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tulostin \"%s\" on asetettu oletustulostimeksi."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Haluatko todella poistaa tulostimen \"%s\"?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Poistetaan tulostin \"%s\" ..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Proxy-asetukset"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Tervetuloa proxyn asettamisohjelmaan.\n"
-"\n"
-"Täältä voit asettaa http- ja ftp-proxysi sisäänkirjautumisen ja\n"
-"salasanojen kanssa tai ilman niitä\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Täytä http-proxyn tiedot\n"
-"Jätä kohta tyhjäksi, jos et haluat http-proxyä"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "portti"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Web-osoitteen tulee alkaa etuliitteellä 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Porttiosan pitäisi olla numeerinen"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Täytä ftp-proxyn tiedot\n"
-"Jätä kohta tyhjäksi, jos et haluat ftp-proxyä"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Web-osoitteen tulee alkaa etuliitteellä 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Syötä proxyn käyttäjätunnus ja salasana, jos sellaiset on.\n"
-"Jätä kohdat tyhjiksi, jos et halua käyttää tunnus/salasana-yhdistelmää"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "käyttäjätunnus"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "salasana"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "salasana uudelleen"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Salasanat poikkeavat toisistaan. Kokeile uudelleen!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "En voi lisätä osiota _alustetulle_ RAID:lle md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "En voi kirjoittaa tiedostoa %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid epäonnistui"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid epäonnistui (ehkä raid-työkalut puuttuvat?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ei riittävästi osioita RAID tasolle %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Käynnistä ALSA (Advanced Linux Sound Architecture) äänijärjestelmä"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron on jaksottainen komentojen ajastaja."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd:ta käytetään valvomaan paristojen tilaa ja raportoimaan siitä syslogin\n"
-"kautta. apmd:tä voidaan myös käyttää sulkemaan kone patterien ollessa tyhjiä."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Ajaa komentoja määrätyillä ajanhetkillä, jotka on määritelty at-komennolla.\n"
-"Ajaa myös eräajoja, kun järjestelmän kuormitus on riittävän matala."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron on UNIX:n perusohjelma joka ajaa määriteltyjä ohjelmia määrätyillä\n"
-"ajanhetkillä. vixie cron lisää monia omianisuuksia verrattuna normaaliin\n"
-"UNIX:n cron ohjelmaan, kuten paremman turvallisuuden ja laajemmat asetukset."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM lisää hiirituen tekstipohjaisiin Linux-sovelluksiin kuten Midnight\n"
-"Commander. GPM mahdollistaa myös leikkaa/liimaa toiminnot hiirellä,\n"
-"ja sisältää tuen valikoille konsolissa."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake etsii uutta laitteistoa ja mahdollisesti konfiguroi\n"
-"uuden/muuttuneen laitteiston."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache on WWW-palvelin. Palvelinta käytetään jakamaan HTML-\n"
-"tiedostoja ja ajamaan CGI-ohjelmia."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet pääpalvelin (yleensä inetd) käynnistää useita eri\n"
-"internet palveluita tarpeen mukaan. Palvelin käynnistää useita\n"
-"palveluita, kuten telnet, ftp, rsh ja rlogin. inetd:n poistaminen\n"
-"poistaa myös nämä palvelut käytöstä."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Käynnistä pakettifiltteri Linux 2.2-sarjalle, jos haluat\n"
-"pystyttää palomuurin suojaamaan konettasi verkkohyökkäyksiltä."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Paketti lataa valitun näppäinkartan /etc/sysconfig/keyboard\n"
-"tiedoston asetusten mukaisesti. Asetukset voidaan valita kbdconfig "
-"työkalulla.\n"
-"Tämä tulisi ottaa käyttöön lähes kaikissa järjestelmissä."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automaattinen ytimen otsikkotiedoston korjaus /boot-hakemistossa "
-"tiedostolle\n"
-"/usr/include/linux/{autoconf,versio}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automaattinen uuden laitteiston havaitseminen ja asettaminen "
-"käynnistettäessä."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf järjestää joskus aikaa erilaisten tehtävien hoitamiseen\n"
-"käynnistyksen aikana pitääkseen yllä järjestelmän asetuksia."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd on tulostuspalvelin, jonka lpr ohjelma vaatii toimiakseen.\n"
-"lpd on palvelin joka jakaa tulostustöitä kirjoittimille."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, jonka avulla voidaan rakentaa suuritehoinen\n"
-"korkean käytettävyyden palvelin."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) on nimipalvelin (DNS) jota käytetään muunnettaessa koneiden "
-"verkkonimiä IP-osoitteiksi."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Liittää ja irroittaa NFS (Network File System), SMB (Lan\n"
-"Manager/Windows) ja NCP (NetWare) liitospaikat."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivoi/Poistaa kaikki verkkoliittymät jotka on asetettu\n"
-"käynnistyksessä."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. Tämä palvelu mahdollistaa NFS-palvelimen\n"
-"käynnistyksen, jakoa ohjataan tiedostosta /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS on yleinen protokolla tiedostojen jakoon TCP/IP-\n"
-"verkoissa. Tämä palvelu mahdollistaa NSF-tiedostolukot."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Asettaa käynnistyksessä numlock-näppäinlukitsimen päälle\n"
-"sekä konsolille että XFree:lle."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Tuki OKI 4w -yhteensopiville Windows-tulostimille."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMIA tukea käytetään yleensä kannettavissa ethernet- ja modeemi-\n"
-"korttien tukemiseen. Palvelu ei käynnisty ellei sitä ole asetettu, joten\n"
-"sen voi asentaa myös koneisiin jotka eivät sitä tarvitse."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper hallitsee RPC-yhteyksiä, joita käyttävät esimerkiksi\n"
-"NFS ja NIS-protokollat. portmap-palvelin on oltava käynnissä\n"
-"järjestelmissä jotka haluavat tarjota näitä protokollia."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix on sähköpostin siirtoagentti, eli ohjelma joka välittää postia "
-"koneelta toiselle."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Tallentaa ja palauttaa järjestelmän satunnaislukualtaan, tämä parantaa\n"
-"satunnaislukujen laatua."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Määrää raakalaitteet blokkilaitteiksi (kuten kiintolevyn\n"
-"osiot) tietyn tyyppisten sovellusten (esim. Oracle) käyttöön"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed-palvelin mahdollistaa automaattiset IP-reititystaulun päivitykset\n"
-"RIP-protokollalla. Vaikka RIP-protokolla on paljon käytetty pienissä "
-"verkoissa,\n"
-"monimutkaisemmat verkot vaativat parempia reititysprotokollia."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstart-protokolla mahdollistaa verkkokäyttäjille\n"
-"eri koneiden tilatietojen haun."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers-protokolla verkon käyttäjille mahdollisuuden tunnistaa, ketkä\n"
-"ovat sisällä eri koneissa."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"rwho-protokollalla etäkäyttäjät voivat listata kaikki koneella\n"
-"olevat käyttäjät (vastaa fingeriä)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Käynnistä äänijärjestelmä tietokoneessasi"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog on tapa jolla monet palvelimet kirjottavat viestinsä talteen\n"
-"useisiin lokitiedostoihin. On järkevää käyttää syslog-ohjelmaa."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Lataa usb-laitteiden ajurit."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Käynnistää X-kirjasinpalvelimen (pakollinen, jos haluat ajaa XFree:tä)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Valitse mitkä palvelut käynnistetään automaattisesti"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Tulostus"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Tiedostojen jako"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Järjestelmä"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Etähallinta"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Tietokantapalvelin"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Palvelut: %d activoitu %d:stä rekisteröidystä"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Palvelut"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "käynnissä"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "pysähtynyt"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Palvelut ja demonit"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ei lisätietoja\n"
-"tälle palvelulle."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Käynnistyksen yhteydessä"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Käynnistä"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Sammuta"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Liity vapaan ohjelmiston maailmaan"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet ja viestintä"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Grafiikka"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Kehitysympäristö"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandraken hallintapaneeli"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Käyttöliittymät"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Palvelinohjelmisto"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Pelit"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Asennan paketteja..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Osiotaulua ei voida lukea, siinä on liikaa virheitä :(\n"
-"Taulu yritetään korjata nollaamalla se"
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Virhe!"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Tarvittavaa esitystiedostoa `%s' ei löytynyt."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Asenna asennusohjelma automaattisesti"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Automaattisten vaiheiden asetus"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Välitse jokaiselle vaiheelle toistetaanko asennus samalla tapaa kuin nyt vai "
-"onko kyseinen vaihe manuaalinen"
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Tervetuloa.\n"
-"\n"
-"Automaattisen asennuksen parametrit löytyvät vasemmalla olevista lohkoista"
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Onnittelut!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Levykkeen luominen onnistui.\n"
-"Voit nyt toistaa asennuksesi."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Automaattinen asennus"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Lisää alkio"
-
-# mat
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Poista viimeinen alkio"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup-raportti \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup Daemonin raportti\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" DrakBackup-raportin yksityiskohdat\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "kokonaisedistyminen"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Varmuuskopioi järjestelmätiedostot..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Kiintolevyn varmuuskopiotiedostot..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Varmuuskopioi käyttäjätiedostot..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Kiintolevyn varmuuskopion edistyminen..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Varmuuskopioi muut tiedostot..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"tiedostolistan lähetti FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) FTP-yhteysongelma: varmuuskopion lähettäminen FTPn kautta epäonnistui.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Virhe lähetettäessä sähköpostia. \n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Tiedostojen valinta"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Valitse tiedostot tai hakemistot ja klikkaa 'Lisää'"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Valitse kaikki asetukset, jotka tarvitset.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Naillä asetuksilla voit varmuuskopioida ja palauttaa kaikki tiedostot /etc-"
-"hakemistosta.\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Varmuuskopioi systeemitiedostot ( /etc-hakemisto )"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Käytä kasvavaa varmuuskopiointia (älä korvaa vanhoja varmuuskopioita)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Älä sisällytä kriittisiä tiedostoja (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Tällä valitsimella voit palauttaa minkä tahansa version\n"
-"/etc-hakemistostasi."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Valitse kaikki ne käyttäjät, jotka haluat sisällyttää varmuuskopioosi."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Älä sisällytä selaimen välimuistia"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Käytä kasvavia varmuuskopitoita (älä korvaa vanhoja varmuuskopioita)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Poista valitut"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Käyttäjät"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Käytä FTP-yhteyttä varmuuskopiointiin"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Syötä verkkoaseman nimi tai IP."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-"Syötä hakemisto, johon tämän\n"
-"koneen varmuuskopio laitetaan."
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Syötä käyttäjätunnuksesi"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Syötä salasanasi"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Muista tämä salasana"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "FTP-yhteys"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "Salattu yhteys"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Käytä CD/DVD-ROM -levyä varmuuskopioille"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Valitse käytettävä CD:n koko"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "Valitse, jos käytät CD-RW-mediaa"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Valitse, jos haluat tyhjentää CD-RW:n ennen kopiointia"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Valitse, jos haluat tehdä CD-levystäsi\n"
-"käynnistettävän."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Syötä kirjoittavan CD-asemasi laitenimi\n"
-"esim: 0,1,0"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Käytä nauhaa varmuuskopioinnissa"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Syötä varmuuskopioinnissa käytettävän laitteen nimi"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Syötä suurin sallittu koko\n"
-"Drakbackup-varmuuskopiolle"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Syötä hakemisto, johon tallennetaan:"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Käytä quotaa varmuuskopiotiedostoille."
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "Verkko"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CD-ROM / DVD-ROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Kiintolevy / NFS"
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "tunneittain"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "päivittäin"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "viikoittain"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "kuukausittain"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Käytä daemonia"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"Valitse peräkkäisten\n"
-"varmuuskopioiden aikaväli"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr ""
-"Valitse varmuuskopiointiin\n"
-"käytettävä media."
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "Käytä kiintolevyä daemonilla"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "Käytä FTPtä daemonilla"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Varmista että cron-daemon on mukana käytössä olevissa palveluissa."
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Lähetä raportti jokaisesta varmuuskopiosta sähköpostitse :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Mitä"
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Missä"
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Koska"
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Lisävalinnat"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup-asetukset"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Valitse, mihin haluat tehdä varmuuskopiot"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "kiintolevylle"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "verkon yli"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Valitse mitä haluat varmuuskopioida"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Varmuuskopioi järjestelmä"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Varmuuskopioi käyttäjät"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Valitse käyttäjät yksitellen"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Varmuuskopion lähteet: \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Järjestelmätiedostot:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Käyttäjätiedostot:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Muut tiedostot:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Tallenna kiintolevylle polulle : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Tallenna FTP:llä verkkoasemalle : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t käyttäjätunnus: %s\n"
-"\t\t polulla: %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Valitsimet:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tÄlä sisällytä järjestelmätiedostoja\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tVarmuuskopiot käyttävät: tar ja bzip2\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tVarmuuskopiot käyttävät: tar ja gzip\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Daemon (%s) sisältää :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-Kiintolevy.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-CD-ROM.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Verkkoon käyttäen FTP:tä.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Verkkoon käyttäen SSH:ta.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ei asetettu, valitse Velho tai Edistynyt.\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista palautettavista tiedoista:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista vahingoittuneista tiedoista:\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Poista valinta tai poista se seuraavalla kerralla."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Varmuuskopiot ovat vahingoittuneet"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr " Kaikki valitsemasi tieto on "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr " onnistuneesti palautettu paikkaan %s "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr " Palauta asetukset "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "Ok palauttaakseen muut tiedostot."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Palautettava käyttäjälista (vain uusin päivä kutakin käyttäjää kohti on "
-"tärkeä)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Tee järjestelmätiedostoista varmuuskopio ennen:"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Valitse päivämäärä, johon tiedon palauttaminen tehdään"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Käytä kiintolevyä varmuuskopiointiin"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Palauta kiintolevyltä."
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Anna hakemisto, johon varmuuskopiot on tallennettu"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Valitse toinen media, josta palauttaa"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Muu media"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Palauta järjestelmä"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Palauta käyttäjät"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Palauta muut"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "valitse polku, josta palautat (juurihakemiston sijaan)"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Tee uusi varmuuskopio ennen palauttamista (vain kasvavilla varmuuskopioilla)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Poista käyttäjien hakemistot ennen palauttamista."
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Palauta kaikki varmuuskopiot"
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Mukautettu palautus"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Apua"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Edellinen"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Tallenna"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Tee varmuuskopio"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Palauta"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Seuraava"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Tee varmuuskopio ennen kuin yrität palauttaa sen...\n"
-"tai tarkista että tallennuspolku on oikea."
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-"Virhe sendmailin aikana\n"
-" raporttipostiasi ei lähetetty\n"
-" Konfiguroi sendmail"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Lista asennettavista paketeista"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Virhe FTP-siirron aikana.\n"
-" Korjaa FTP-asetuksesi."
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Valitse palautettava tieto..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Valitse varmuuskopioinnissa käytettävä media..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Valitse varmuuskopioitava tieto..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Asetustiedostoa ei löytynyt\n"
-"valitse joko Velho tai Kehittynyt."
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "Kehityksen alla ... odota."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Varmuuskopioi järjestelmätiedostot"
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Varmuuskopioi käyttäjätiedostot"
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Varmuuskopioi muut tiedostot"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "Kokonaisedistyminen"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "tiedostoja lähetetään FTP:n yli"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Lähetän tiedostoja..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Tietolista sisällytettäväksi CD-ROMiin"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Valitse kirjoittavan CD-aseman nopeus"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr "Valitse kirjoittavan CD-aseman laitenimi (esim. 0,1,0)"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Valitse, jos haluat tehdä käynnistettävän CD:n."
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Tee heti asetustiedoston varmuuskopio"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Näytä varmuuskopioinnin asetukset."
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr ""
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Varmuuskopioi heti"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft. Tekijä: DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s:n asennus epäonnistu. Seuraava virhe tapahtui:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Etsi asennetut kirjasimet"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Poista asetettujen kirjasimien valinta"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "jäsennä kaikki kirjasimet"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "kirjasimia ei löytynyt"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "valmis"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "liitetyiltä osioilta ei löytynyt ainoatakaan kirjasinta"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Valitse uudelleen oikeat kirjasimet"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "kirjasimia ei löytynyt.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Etsi kirjasimia asennettujen listalta"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Kirjasimet kopioi"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "True Type kirjasimien asennus"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "odota kunnes ttmkfdir on valmis..."
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "True Type -asennus valmis"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Kirjasinten muuntaminen"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "rakennetaan: type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "ttf kirjasinten muunnos"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "pfm kirjasinten muunnos"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Poista väliaikaistiedostot"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Käynnistä XFS uudelleen"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Poista kirjasintiedostot"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "xfs:n uudelleenkäynnistys"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Ennen kuin asennat uusia kirjasimia, varmista että sinulla on oikeudet "
-"käyttää ja asentaa ne järjestelmääsi.\n"
-"\n"
-"- Voit asentaa kirjasimet perinteisellä tavalla. Harvoissa tapauksissa bogus-"
-"kirjasimet voivat lukitä X-palvelimen."
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Kirjasinten tuonti"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Hae Windowsin kirjasimet"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Poista kirjasimet levyltä"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Lisävalinnat"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Kirjasinlista"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Valitse sovellukset, jotka tukevat kirjasimia :"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Yleiset tulostimet"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Valitse kirjasintiedosto tai hakemisto ja klikkaa 'Lisää'"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Asenna lista"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "paina tähän, kun olet varma."
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "tähän jos et ole."
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Poista valinta kaikista"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Valitse kaikki"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Poista lista"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Alkutestit"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Kopioi kirjasimet järjestelmääsi"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Asenna & muunna kirjasimia"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Asennuksen jälkeiset toiminnot"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Poista järjestelmässäsi olevia kirjasimia"
-
-# Asennuksen sivuvalikko
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Poistamisen jälkeiset toiminnot"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Internetyhteyden jakaminen"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetyhteyden jakaminen on käytössä"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on: käytössä.\n"
-"\n"
-"Mitä haluat tehdä?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "poista käytöstä"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "lopeta"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "aseta uudelleen"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Poistan palvelut käytöstä..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Internetyhteyden jakaminen ei ole enää käytössä."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetyhteyden jakaminen ei ole käytössä"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetyhteyden jakaminen on jo asetettu.\n"
-"Sen nykyinen tila on .ei käytössä\n"
-"\n"
-"Mitä haluat tehdä?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "ota käyttöön"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Otan palvelut käyttöön.."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Internetyhteyden jakaminen on nyt käytössä."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Olet aikeissa asettaa tietokoneesi jakamaan internetyhteyden muiden koneiden "
-"kanssa.\n"
-"Tällä ominaisuudella muut paikallisverkossa olevat tietokoneet voivat "
-"käyttää tämän tietokoneen internetyhteyttä.\n"
-"\n"
-"Huomaa: tarvitset erityisen verkkokortin pystyttääksesi oman paikallisverkon."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Liittymä %s (käyttäen moduulia %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Liittymä %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Koneessasi ei ole verkkokorttia!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Koneestasi ei löytynyt yhtään verkkokorttia. Aja laitteistonhakutyökalu."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Verkkoliittymä"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Tietokoneessasi on vain yksi verkkokortti:\n"
-"\n"
-"%s\n"
-"\n"
-"Valmistaudun asettamaan lähiverkkosi asetukset kyseiselle laitteelle."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Valitse verkkokortti, joka on kytketty paikallisverkkoon."
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Verkkoliitäntä on jo asetettu"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varoitus, verkkokortti (%s) on jo asetettu.\n"
-"\n"
-"Haluatko automaattisen uudelleenasetuksen?\n"
-"\n"
-"Voit asettaa sen myös manuaalisesti, mutta silloin sinun pitää tietää, mitä "
-"olet tekemässä."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Automaattinen uudelleenasetus"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Näytä nykyiset liitäntäasetukset"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Koneen `%s' nykyiset asetukset:\n"
-"\n"
-"Verkko: %s\n"
-"IP-osoite: %s\n"
-"IP-määreet: %s\n"
-"Ajuri: %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Voin säilyttää nykyiset asetuksesi ja olettaa, että olet jo pystyttänyt DHCP-"
-"palvelimen. Siinä tapauksessa varmista että luen oikein C-luokan verkon, "
-"jota käytät paikallisverkkonasi, sillä en muuta sen asetuksia tai koske DHCP-"
-"palvelimesi asetuksiin.\n"
-"\n"
-"Muussa tapauksessa voin asettaa liitäntäsi ja asettaa (uudelleen) DHCP-"
-"palvelimen puolestasi.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "C-luokan paikallisverkko"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "(Tämän) DHCP-palvelimen IP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Aseta liityntärajapinta ja DHCP-palvelin uudelleen"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Paikallisverkko ei loppunut '.0':aan, töydennetään."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Mahdollinen lähiverkon osoitetörmäys löydetty nykyisillä asetuksilla %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Palomuuri löydetty!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Varoitus! Olemassaoleva palomuuri löydetty. Tarvitset mahdollisesti käsin "
-"tehtäviäkorjauksia asennuksen jälkeen."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Määrittelen..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Määrittelen komentotiedostot, asennan ohjelmistot, käynnistän palvelimet..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Asennan pakettia %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Kaikki asetettu.\n"
-"Voit nyt jakaa internetyhteyden muiden lähiverkon koneiden kanssakäyttämällä "
-"automaattista lähiverkon määrittelyä (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"Asetukset on jo tehty, mutta ne ovat tällä hetkellä poistettu käytöstä."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Asetukset on jo tehty ja ne ovat käytössä."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Internetyhteyden jakamista ei ole koskaan asetettu."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Internetyhteyden jakamisen asetukset"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Tervetuloa internetyhteyden jakamisen apuohjelmaan!\n"
-"\n"
-"%s\n"
-"\n"
-"Paina Aseta käynnistääksesi asennusohjelman."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Verkon asetukset (%d-laitteille)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profiili: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Poista profiili..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Valitse poistettava profiili:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Uusi profiili..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Luotavan profiilin nimi (uusi profiili luodaan kopioimalla nykyisen tiedot) :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Koneen nimi:"
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internetyhteys"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tyyppi:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Yhdyskäytävä:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Liitäntä:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Tila:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Odota hetki"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Määrittele internetyhteys..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Lähiverkon asetukset"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Ajurit"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Liitäntä"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokolla"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Tila"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Aseta paikallisverkko..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Paina tähän käynnistääksesi asennusohjelman ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Velho..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Toteuta"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Odota hetki... Otetaan asetukset käyttöön"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Yhteys muodostettu"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Ei yhteyttä"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Yhdistä..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Katkaise yhteys..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Varoitus, toinen internet-yhteys on havaittu, mahdollisesti käyttäen sinun "
-"vekkoasi"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sinulla ei ole ainoatakaan asetettua liityntää.\n"
-"Aseta ne ensin klikkaamalla 'Aseta'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Lähiverkon asetukset"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Laite %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Käynnistysprotokolla"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Käynnistetty koneen käynnistämisen yhteydessä"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP-asiakas"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "aktivoi nyt"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "deaktivoi nyt"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Tätä liityntärajapintaa ei ole vielä asetettu.\n"
-"Käynnistä pääikkunasta löytyvä asetusvelho"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Sinulla ei ole ainoatakaan internet-yhteyttä.\n"
-"Luo sellainen ensin klikkaamalla 'Aseta'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Internetyhteyden asetus"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Internetyhteyden asetus"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Yhteyden nimi: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametrit"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Yhdyskäytävä"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Verkkokortti"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP-asiakas"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Asetan turvatasoa"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrollipaneeli"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Valitse haluamasi työkalu"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Kanada (kaapeli)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "Yhdysvallat (bcast)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "Yhdysvallat (kaapeli)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "Yhdysvallat (hrc-kaapeli)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Kiina (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japani (bcast)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japani (kaapeli)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Itä-Eurooppa"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlanti"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Länsi-Eurooppa"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australia"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Uusi-Seelanti"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Etelä-Afrikka"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentiina"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Ole hyvä,\n"
-"kirjoita käyttämäsi tv-normi sekä asuinmaa"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "TV-normi :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Alue :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "TV-kanavien haku käynnissä ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Haetaan TV-kanavia"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "käyttö: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Valitse näppäimistösi asettelu."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Haluatko BackSpace-näppäimen toimivan kuten Delete konsolissa?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Vaihda CD-levyä"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Aseta asennuslevy CD-asemaan ja paina Ok.\n"
-"Jos sinulla ei ole levyä, paina Peruuta estääksesi järjestelmän päivityksen."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Järjestelmän päivitystä ei voida aloittaa!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "Näytä vain valittu päivä"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Tiedosto/_Uusi"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>U"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Tiedosto/_Avaa"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Tiedosto/_Tallenna"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>T"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/File/Tallenna _Nimellä"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Tiedosto/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Valinnat"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Valinnat/Testi"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Ohje"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Ohje/_Tietoja..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Käyttäjä"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Viestit"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Järjestelmäloki"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Mandraken työkälujen selitykset"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "etsi"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Työkalu lokien seuraamiseen"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Asetukset"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "täsmää"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "mutta ei täsmää"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Valitse tiedosto"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Kalenteri"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Tiedoston sisältö"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Posti- ja SMS-hälytys"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "odota hetki, jäsennän tiedostoa : %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Posti- ja SMS-hälytyksen asetukset"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Tervetuloa sähköpostin ja SMS-viestien asettamisohjelmaan.\n"
-"\n"
-"Täällä voit pystyttää hälyytysjärjestelmän.\n"
-
-# ../../share/compssUsers
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "Palveluiden asettaminen"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr "Saat hälytyksen kun jokin valituista palveluista ei ole enää käynnissä"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "lataa asetukset"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Saat hälytyksen jos kuorma on tätä arvoa suurempi"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "hälytyksen asetukset"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Aseta tapa, jolla järjestelmä hälyttää sinulle"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Tallenna nimellä.."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Valitse hiiren tyyppi."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "serial_usb:ta ei löytynyt\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuloi kolmatta näppäintä?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s löytyi paikasta %s, aseta se ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Valitse skanneri"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Tätä %s skanneria ei ole tuettu"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Käynnistyslaite"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Palomuurin asetukset"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Palomuurin asetukset"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Palomuurin asettaminen\n"
-"\n"
-"Olet jo määritellyt palomuurin. Paina \"Määrittele\" \n"
-"poistaaksesi palomuurin tai muuttaaksesi sen asetuksia"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Palomuurin asettaminen\n"
-"\n"
-"Paina \"Määrittele\" pystyyttääksesi palomuurin"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Kieliasetukset"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Asennuksen luokka"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Kiintolevyjen tunnistus"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Hiiren määrittely"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Näppäimistön valinta"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Tietoturva"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Tiedostojärjestelmät"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Levyjen osiointi"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Asennettavat paketit"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Asenna järjestelmä"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Käyttäjien lisääminen"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Verkkoasetukset"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Palvelujen asettaminen"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Lataajan asetus"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Käynnistyslevyke"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Asenna X"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Asenna päivitykset"
-
-# Asennuksen sivuvalikko
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Lopeta asennus"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewallin asettaminen\n"
-"\n"
-"Tämä vaihe asettaa henkilökohtaisen palomuurin Mandrake Linux\n"
-"-järjestelmääsi. Mikäli haluat tehokkaan palomuuriratkaisun, hae\n"
-"lisätietoja MandrakeSecurity Firewall distribuutiosta."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Tässä vaiheessa kysytään mitä palveluita haluat haluat sallia muille\n"
-"internetin käyttäjille siksi aikaa kun tietokoneesi on internetissä. \n"
-"Harkitse huolellisesti, ennen kuin vastaat näihin kysymyksiin,\n"
-"sillä nämä vaikuttavat tietokoneesi tietoturvaan.\n"
-"\n"
-"Jos et käytä tällä hetkellä ainoatakaan seuraavista palveluista,\n"
-"suojaa tietokoneesi palomuurilla. Voit muuttaa näitä asetuksia milloin \n"
-"haluat vain käynnistämällä tämän ohjelman uudelleen."
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Onko tietokoneessasi webbisivuja, joiden haluat näkyvän kaikkialle\n"
-"internettiin? Jos ajat webbipalvelinta, jonka tarvitsee näkyä väin\n"
-"omalle tietokoneellesi, voit turvallisesti vastata EI tähän kysymykseen.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Haluatko koneesi toimivan nimipalvelimena? Jos et halua pystyttää \n"
-"nimipalvelinta jakamaan IP- ja vyöhyketietoja internettiin, vastaa ei.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Haluatko sallia koneellesi tulevat Secure Shell (ssh) -yhteydet? Tämä\n"
-"on telnetin korvaava palvelu, jota voit käyttää kirjoittautuaksesi sisään\n"
-"internetin kautta. Jos käytät vielä telnetiä, sinun pitäisi vaihtaa se \n"
-"ssh:iin. Telnet-yhteydet eivät ole suojattuja -- hyökkääjä voi varastaa\n"
-"salasanasi, jos käytät sitä. Ssh-yhteys on sitävastoin suojattu, joten\n"
-"kukaan ei pysty salakuuntelemaan sitä."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Haluatko sallia sisään tulevat telnet-yhteydet?\n"
-"Tämä on hirvittävän vaarallista, kuten edellinen kohta osoitti.\n"
-"Suosittelemme että vastaisit Ei tähän kohtaan ja käyttäisit\n"
-"telnetin sijaan ssh:ta.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Ajatko tietokoneellasi FTP-palvelinta, jonka haluat näkyvän myös\n"
-"internettiin? Jos vastasit kyllä, suosittelemme, että käyttäisit sitä\n"
-"vain anonyymeihin siirtoihin. Mikä tahansa salasana voidaan varastaa,\n"
-"mikäli se siirretään FTP-protokollan kautta, sillä FTP ei suojaa\n"
-"siirrettäviä salasanoja.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Toimiiko tietokoneesi postipalvelimena? Jos lähetät sähköpostiviestisi\n"
-"pinen, muttin tai minkä tahansa tekstipohjaisen postinlukuohjelmiston\n"
-"avulla, se on todennäköistä. Muussa tapauksessa sinun pitäisi suojata\n"
-"ominaisuus pois palomuurin avulla.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Ajatko POP- tai IMAP-palvelinta koneellasi? Näitä palvelimia\n"
-"käytetään ylläpitämään ei-webbipohjaisia sähköpostitunnuksia\n"
-"ihmisille, jotka haluavat hakea postinsa tältä koneelta omillensa.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Käytät 2.2-sarjan Linuxin ydintä. Jos internetosoite (IP),\n"
-"jota tietokoneesi käyttää, asetetaan automaattisesti\n"
-"toisesta kotonasi tai työpaikallasi olevasta tietokoneesta\n"
-"(eli se on dynaamisesti määrätty), ominaisuuden käyttö \n"
-"pitää sallia. Pitääkö paikkaansa?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Onko tietokoneesi kello synkronoitu toisen tietokoneen kanssa?\n"
-"Useimmiten tätä ominaisuutta käytetään keskisuurissa Unix/Linux\n"
-"-organisaatioissa esimerkiksi lokin synkronointiin. Jos tietokoneesi\n"
-"ei ole osa suurempaa toimistoa tai et ole kuullut tällaisesta, \n"
-"järjestelmä ei luultavasti ole synkronoitu."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Asetukset tehty. Kirjoitetaanko muutokset levylle?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "En voi avata %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Tiedostoa %s ei voi avata kirjoittamista varten: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Palomuurin asetukset"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Valmistelen asennusta"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Verkkopääte (asiakas)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-, SMB-, SSH- ja välipalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Toimistosovellukset"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome-työasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Työkalut Palm Pilotin tai Visorin liittämiseksi"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Työasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Palomuuri / Reititys"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Nimipalvelin ja tietoverkon informaatiopalvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office-ohjelmistot: tekstinkäsittely (kword, abiword), taulukkolaskenta "
-"(kspread,gnumeric), pdf-lukijat jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Äänenkäsittely: mp3, midi, mikserit, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Kirjoja ja ohjeita Linuxista sekä vapaan lähdekoodin ohjelmista"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE-työasema"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, jne"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Kokoelma työkaluja sähköpostiin, nyytisiin, webiin, tiedostonsiirtoon ja "
-"jutusteluun"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Tietokanta"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL tai MySQL tietokantapalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Työkalut, jotka helpottavat tietokoneesi asetusten muokkaamista"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Ääni"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Apuohjelmat"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentaatio"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Komentorivityökalut"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix-postipalvelin, Inn-nyytispalvelin"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet-asema"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedia-asema"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Asetustyökalut"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Lisää graafisia työpöytiä (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K-työpöytäympäristö. Graafinen perusympäristö ja sen mukana tulevat työkalut"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Graafinen ympäristö"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache WWW-palvelin ja Pro-ftpd FTP-palvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Työkalut CD:iden luomiseen ja polttamiseen"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Toimistotyöasema"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Palvelin"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafiikkaohjelmistot, kuten Gimp"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C ja C++ ohjelmointityökalut, kirjastot ja include-tiedostot"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Verkkotietokone (palvelin)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Sähköposti/Groupware/Nyytiset"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Pelikone"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Videon katselu ja editointi"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Grafiikka"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Pelit: tasohyppely, korttipelit, strategia, jne"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Valikoima työkaluja sähköpostin ja nyytisten lukemiseen (pine, mutt, tin...) "
-"sekä internetissä surffailuun"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Varmuuskopiointi, emulaattorit, järjestelmän tarkkailu"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Henkilökohtainen kirjanpito"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Graafinen ympäristö käyttäjäystävällisellä ohjelmistolla ja työkaluilla."
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Asiakasohjelmat eri protokollille (ssh jne)"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internetyhdyskäytävä"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Äänen sekä videon soitto- ja editointiohjelmat"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Muut graafiset käyttöympäristöt"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorit, komentotulkit, tiedostotyökalut, terminaalit"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Tilinpito-ohjelmia, kuten gnucash"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Henkilökohteisen tiedon hallinta"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - CD:n poltto"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Tieteelliinen työasema"
-
-#~ msgid "About"
-#~ msgstr "Tietoja"
-
-#~ msgid " Help "
-#~ msgstr " Apua "
-
-#~ msgid "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-#~ msgstr "-adobe-utopia-medium-r-normal-*-12-*-*-*-p-*-iso8859-*,*-r-*"
-
-#~ msgid ""
-#~ "Can't access kernel modules corresponding to your kernel (file %s is "
-#~ "missing)"
-#~ msgstr "Ei saantia käytössä olevan ytimen moduuleihin (tiedosto %s puuttuu)"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ei asetettu"
-
-#~ msgid "Choose a default printer!"
-#~ msgstr "Valitse oletustulostin !"
-
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Toteuta/Lue uudelleen tulostimet"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Voit antaa lisäasetuksia modulille %s."
-
-#~ msgid "Low"
-#~ msgstr "Matala"
-
-#~ msgid "Medium"
-#~ msgstr "Keskitaso"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Muutamia parannuksia tällä turvaasolla, suurimpana se että "
-#~ "järjestelmässä\n"
-#~ "on enemmän turvallisuusvaroituksia ja tarkistuksia."
-
-#~ msgid "mount failed"
-#~ msgstr "liittäminen epäonnistui"
-
-#~ msgid "Boot mode"
-#~ msgstr "Käynnistila"
-
-#~ msgid "Export"
-#~ msgstr "Vie"
-
-#~ msgid "click here"
-#~ msgstr "klikkaa tähän"
diff --git a/perl-install/share/po/fr.po b/perl-install/share/po/fr.po
deleted file mode 100644
index abfe2a8c9..000000000
--- a/perl-install/share/po/fr.po
+++ /dev/null
@@ -1,12589 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999 Mandrakesoft
-# David BAUDENS <baudens@mandrakesoft.com>, 1999-2002
-# David ODIN <odin@mandrakesoft.com>, 2000
-# Pablo Saratxaga <pablo@mandrakesoft.com>, 2001
-# KAtiOS <katios@nolabel.net>, 2001
-# Guillaume Cottenceau <gc@mandrakesoft.com>, 2001-2002
-# Thierry Vignaud <tvignaud@mandrakesoft.com>, 2001-2002
-# Combelles Christophe <ccomb@club-internet.fr>, 2002
-#
-# Veuillez ne pas mettre ŕ jour ce fichier ŕ moins d'ętre
-# certain tant de vos traductions que de votre grammaire et
-# de votre orthographe. Ces derničres sont trop souvent
-# approximatives. Elles nécessitent alors des relectures et
-# des corrections qui n'ont d'autre conséquence que de faire
-# perdre du temps ŕ tout le monde (ŕ vous si votre travail est
-# imparfait et aux relecteurs qui doivent rechercher puis corriger
-# vos éventuelles fautes).
-#
-# VEUILLEZ RESPECTER LA TYPOGRAPHIE FRANÇAISE !
-# Les majuscules doivent ętre accentuées si besoin est. Respectez
-# les espaces nécessaires pour la ponctuation (espace aprčs la virgule et
-# le point, espace insécables avant les points d'interrogation,
-# d'exclamation, les deux-points et le point virgule, espace aussi aprčs
-# le point virgule).
-#
-# ESPACES INSÉCABLES
-# Vous devez utiliser un espace insécable (c'est un espace qui ne peut
-# pas servir de rupture ŕ la ligne) avant le point d'exclamation, le
-# point d'interrogation, le deux-points, le point virgules, et pour les
-# "quantités", entre le nombre et l'unité abbrégée (par exemple "10 g").
-# L'espace normal en ISO et UTF8 est le caractere 0x20 tandis que l'espace
-# insécable est le caractčre 0xA0. Sous Emacs en utilisant le po mode
-# livré avec gettext >= 0.10.40-4mdk vous pouvez voir celui-ci avec un
-# fond de couleur spécial. Sous Vi celui-ci est normalement affiché
-# précédé du caractčre pipe "|". Pour le tapper sous la plupart des
-# éditeurs, vous pouvez utiliser la touche "Compose" puis en tappant
-# deux espaces. Si vous n'avez pas de touche compose, vous pouvez
-# donner cette fonction ŕ la touche "Windows" droite de votre clavier
-# avec la commande suivante :
-# xmodmap -e 'keycode 116 = Multi_key'
-#
-# Les guillemets françaises sont Ť et ť et non ". La guillemet ouvrante
-# Ť est suivie d'un espace insécable et la guillemet fermante ť est
-# précédée du męme type d'espace. Pour le tapper, vous pouvez utiliser
-# la combinaison Compose < <, et Compose > >.
-#
-# Enfin, traduisez INTELLIGEMMENT et non mot ŕ mot. Certaines traductions
-# n'ont aucun sens en français.
-#
-# Nous vous remercions de votre compréhension.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX for MDK 8.1\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-06 01:36GMT+1\n"
-"Last-Translator: Combelles Christophe <ccomb@club-internet.fr>\n"
-"Language-Team: french <fr@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Configurer les écrans séparément"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Étaler l'affichage sur plusieurs écrans (Xinerama)"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Configurer seulement la carte Ť %s ť (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Configuration multi-écrans"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Votre systčme peut utiliser simultanément plusieurs écrans.\n"
-"Que souhaitez-vous faire ?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Carte graphique"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Choisissez une carte graphique"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Choisissez un serveur d'affichage (serveur XFree)"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "serveur XFree"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Choisissez un pilote d'affichage X11"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "serveur X11"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Quelle configuration d'XFree désirez-vous utiliser ?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Votre carte vidéo est supportée par XFree %s. Ce dernier peut ętre plus\n"
-"performant en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle avec XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s avec accélération 3D matérielle"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle en utilisant\n"
-"XFree %s.\n"
-"Veuillez noter que ce support est EXPÉRIMENTAL et qu'il peut BLOQUER VOTRE\n"
-"ORDINATEUR."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s avec support EXPÉRIMENTAL de l'accélération 3D matérielle"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Votre carte vidéo peut utiliser l'accélération 3D matérielle mais\n"
-"uniquement en utilisant XFree %s.\n"
-"Attention, veuillez noter que ce support est EXPÉRIMENTAL et peut BLOQUER\n"
-"VOTRE ORDINATEUR.\n"
-"\n"
-"Votre carte vidéo est supportée par XFree %s. Ce dernier peut ętre plus\n"
-"performant en 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installation du pilote d'affichage)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuration d'XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr ""
-"Veuillez préciser la quantité de mémoire vidéo de votre carte graphique"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Choisissez les options du serveur d'affichage"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Choisissez un moniteur"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Moniteur"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Les deux paramčtres importants sont la fréquence de rafraîchissement\n"
-"verticale (qui détermine la vitesse ŕ laquelle l'écran est rafraîchi)\n"
-"et, surtout, la fréquence de synchronisation horizontale (qui détermine\n"
-"la vitesse ŕ laquelle les lignes sont tracées).\n"
-"\n"
-"Il ne faut SURTOUT PAS choisir un type de moniteur ayant\n"
-"une fréquence de rafraîchissement excédant les capacités de votre\n"
-"moniteur. Vous risqueriez de l'endommager.\n"
-"En cas de doute, choisissez un réglage moins performant mais\n"
-"sans risque pour votre matériel."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Fréquence horizontale"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Fréquence verticale"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Le moniteur n'est pas configuré"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "La carte graphique n'est pas encore configurée"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "La résolution n'a pas encore été choisie"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Désirez-vous tester la configuration ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Attention : tester cette carte vidéo peut bloquer votre ordinateur"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Test de la configuration"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"essayez de modifier quelques paramčtres"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Une erreur est survenue :"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Fin du test dans %d secondes"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Ętes-vous satisfait(e) ?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr ""
-"Une erreur est survenue, essayez de modifier\n"
-"quelques paramčtres"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Résolution"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Choix de la résolution et du nombre de couleurs"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carte graphique : %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Serveur XFree86 : %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Davantage"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ok"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mode expert"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Tout montrer"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Résolutions"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Type de clavier : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Type de souris : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Périphérique : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Moniteur : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Fréquence horizontale : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Fréquence verticale : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carte graphique : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Indentification de la carte graphique : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Mémoire vidéo : %s ko\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Nombre de couleurs : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Résolution : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Serveur XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Pilote XFree86 : %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Préparation de la configuration de X Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Que désirez-vous faire ?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Choisir un type de moniteur"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Choisir un type de carte graphique"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Changer les options du serveur d'affichage"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Changer la résolution"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Afficher la configuration actuelle"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Tester ŕ nouveau"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Quitter"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Désirez-vous conserver les changements ?\n"
-"La configuration actuelle est :\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Interface graphique lors du démarrage"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Voulez-vous que l'interface graphique soit\n"
-"automatiquement lancée lors du démarrage ?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Veuillez relancer %s pour activer les changements"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Veuillez vous déconnecter puis presser simultanément les touches Ctrl-Alt-"
-"BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 couleurs (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 768 couleurs (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 536 couleurs (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16,7 millions de couleurs (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4,3 milliards de couleurs (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 ko"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 Mo"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 Mo ou plus"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480 ŕ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ŕ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 ŕ 87 Hz entrelacé (sans 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ŕ 87 Hz entrelacé, 800x600 ŕ 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA étendu, 800x600 ŕ 60 Hz, 640x480 ŕ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non entrelacé, 1024x768 ŕ 60 Hz, 800x600 ŕ 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA haute fréquence, 1024x768 ŕ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-fréquences supportant le 1280x1024 ŕ 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-fréquences supportant le 1280x1024 ŕ 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-fréquences supportant le 1280x1024 ŕ 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Moniteur supportant le 1600x1200 ŕ 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Moniteur supportant le 1600x1200 ŕ 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Premier secteur de la partition d'amorçage"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Premier secteur du disque (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Installation de SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Oů désirez-vous installer le programme d'amorçage ?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Installation de LILO ou Grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO en mode texte"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO en mode graphique"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Démarrer ŕ partir de DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Principales options du programme d'amorçage"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Programme d'amorçage ŕ utiliser"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Installation du programme d'amorçage"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Périphérique d'amorçage"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne fonctionne pas avec des BIOS anciens)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mode vidéo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Délai avant l'activation du choix par défaut"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Mot de passe"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Mot de passe (vérif)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Protéger par mot de passe les options"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "Protection des options"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Vider le dossier /tmp ŕ chaque démarrage"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Précisez la taille mémoire si nécessaire (%d Mo trouvés)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Autoriser plusieurs profils"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Indiquez la quantité de mémoire en Mo"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Le protection des options est inutile sans mot de passe"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Veuillez réessayer"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Les mots de passe ne correspondent pas"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Message de démarrage"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Délai de l'Open Firmware"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Délai d'amorçage du noyau"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Autoriser le démarrage sur CD ?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Autoriser le démarrage sur l'OF ?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS par défaut ?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Vous avez décidé d'installer le programme d'amorçage sur une partition.\n"
-"Cela implique que vous ayez déjŕ un programme d'amorçage sur le disque dur "
-"sur lequel le systčme démarre (ie: System Commander).\n"
-"\n"
-"Sur quel disque est-ce que le systčme démarre ?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Voici les différentes entrées.\n"
-"Vous pouvez en rajouter de nouvelles ou changer les entrées existantes."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Ajouter"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Terminer"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modifier l'élément sélectionné"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Quel type de systčme voulez-vous ajouter ?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Autres systčmes (SunOS, etc.)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Autres systčmes (MacOS, etc.)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Autres systčmes (Windows, etc.)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "fichier noyau"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Partition racine"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "options passées au noyau"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Fichier RamDisk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Préactivé en écriture"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Table des partitions"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Peu sűr"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Choix par défaut"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Taille du RamDisk"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Supprimer l'entrée"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Un label vide n'est pas autorisé"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Vous devez spécifier l'image noyau désirée"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Vous devez spécifier une partition racine"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ce label est déjŕ utilisé"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Interface(s) %s %s détectée(s)"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "En possédez-vous d'autres ?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Possédez-vous des interfaces %s ?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Non"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Oui"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Voir les informations sur le matériel"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installation du pilote pour la carte %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quel pilote %s faut-il essayer ?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Le pilote de matériel Ť %s ť a parfois besoin d'options supplémentaires\n"
-"pour fonctionner de maničre optimale.\n"
-"Vous pouvez lui fournir manuellement ces options,\n"
-"ou bien lui laisser les détecter automatiquement.\n"
-"(La détection peut dans certains cas bloquer l'ordinateur,\n"
-"mais sans lui causer de dommage.)"
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Détection automatique"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Spécifier des options"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Vous pouvez maintenant founir des options au module %s.\n"
-"Veuillez noter que les adresses doivent ętre généralement préfixées de 0x, "
-"comme '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Vous pouvez maintenant préciser les options du module %s.\n"
-"Les options sont de la forme Ť nom=valeur nom2=valeur2 ... ť.\n"
-"Par exemple, Ť io=0x300 irq=7 ť"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Options du module :"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Le chargement du module %s a échoué.\n"
-"Désirez-vous réessayer avec d'autres paramčtres ?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "accčs aux programmes graphiques"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "accčs aux outils rpm"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "autoriser Ť su ť"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "accčs aux fichiers d'administration"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "Utilisateur(s) existant(s) : %s"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ce mot de passe est trop simple"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Veuillez taper un nom d'utilisateur"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Le nom d'utilisateur ne peut contenir que des lettres minuscules,\n"
-"des nombres, ainsi que les caractčres Ť - ť et Ť _ ť"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ce nom d'utilisateur est déjŕ utilisé"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Ajouter un utilisateur"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Créer un compte utilisateur\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Accepter"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nom et prénom"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nom d'utilisateur"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Interpréteur"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icône"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Connexion automatique"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Lors du démarrage, voulez-vous que le systčme connecte\n"
-"automatiquement un utilisateur par défaut ?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Choisissez l'utilisateur par défaut :"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Choisissez l'environnement graphique :"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Choisissez la langue :"
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-"Vous pouvez choisir d'autres langues.\n"
-"Elles seront disponibles aprčs l'installation."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Tout"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Autoriser tous les utilisateurs"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personnalisée"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Pas de partage"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Le paquetage %s doit ętre installé. Voulez-vous l'installer ?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"Voulez-vous exporter par NFS (protocole Unix) ou SMB (protocole Windows)?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Le paquetage %s, qui est obligatoire, est manquant"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Voulez-vous permettre aux utilisateurs de partager certains sous-répertoires de leur répertoire personnel (/home) ?\n"
-"Permettre cela autorisera les utilisateurs ŕ cliquer simplement sur Ť Partager ť dans konqueror et nautilus.\n"
-"\n"
-"Ť Personnalisée ť permet de choisir pour chaque utilisateur.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Annuler"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Lancer userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Le partage par utilisateur utilise le groupe Ť fileshare ť.\n"
-"Vous pouvez utiliser userdrake pour rajouter un utilisater dans ce groupe."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Bienvenue aux pirates"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Trčs faible"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standard"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Élevée"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Plus élevée"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoďaque"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ce niveau de sécurité doit ętre utilisé avec précaution. Il rend votre\n"
-"systčme plus facile ŕ utiliser, aux dépens de la sécurité. Il ne devrait\n"
-"donc pas ętre utilisé sur une machine connectée ŕ un réseau ou ŕ "
-"l'internet.\n"
-"Aucun mot de passe n'est requis."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Les mots de passe sont maintenant requis. Pour autant, il n'est pas\n"
-"recommandé d'utiliser cette machine sur un réseau."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ceci est le niveau de sécurité standard recommandé pour un ordinateur \n"
-"utilisé pour se connecter ŕ l'internet en tant que client."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Il y a déjŕ des restrictions, et des vérifications automatiques sont "
-"effectuées chaque nuit."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Avec ce niveau de sécurité, l'utilisation de cette machine en tant que\n"
-"serveur devient envisageable. La sécurisation est suffisamment forte pour\n"
-"accepter les connexions de nombreux clients. Note : si votre machine est\n"
-"seulement connectée en tant que client sur Internet, vous devriez plutôt\n"
-"choisir un niveau inférieur."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Ce niveau de sécurité est basé sur le précédent mais le systčme est "
-"maintenant\n"
-"complčtement clos (vu du réseau). La sécurité est maximale."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Choisissez le niveau de sécurité"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Niveau de sécurité"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Utilisation de Ť libsafe ť pour les serveurs"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Une bibliothčque qui protčge contre les attaques par débordement de pile.\n"
-"(les plus fréquentes)"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Bienvenue dans %s, le chargeur de systemes d'exploitation.\n"
-"\n"
-"Choisissez un systeme d'exploitation dans la liste ci-dessus.\n"
-"-- Demarrage automatique dans %d secondes.\n"
-"\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Bienvenue dans GRUB, le chargeur de systemes d'exploitation"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Utilisez les touches %c et %c pour faire votre choix."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Appuyez sur <Entree> pour demarrer, sur <e> pour modifier la"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commande de demarrage ou sur <c> pour utiliser la ligne de commande."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Demarrage automatique dans %d secondes."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "il n'y a pas assez de place dans le dossier /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Bureau"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menu Démarrer"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-"Vous ne pouvez pas installer le programme d'amorçage\n"
-"sur une partition %s\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "pas d'aide disponible pour l'instant.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuration du style de démarrage"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fichier"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fichier/_Quitter"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Moniteur nouveau style avec catégorisation"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Moniteur nouveau style"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Moniteur traditionnel"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Moniteur traditionnel Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Démarrage entičrement graphique (Aurora)"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Menu d'amorçage"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Menu d'amorçage"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Le choix du systčme d'exploitation est actuellement géré par %s.\n"
-"Vous pouvez ici modifier la liste du menu d'amorçage."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Configurer"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Choix pour l'interface utilisateur"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lancer l'interface graphique au démarrage"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne pas connecter automatiquement un utilisateur"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Connexion automatique (choisir utilisateur et environnement)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Impossible de lire le fichier /etc/inittab  : %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "Go"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "Ko"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "Mo"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "To"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutes"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minute"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d secondes"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Impossible de faire des captures d'écran avant le partitionnement"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Les captures d'écran seront disponibles aprčs l'installation dans %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "France"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgique"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "République Tchčque"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Allemagne"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grčce"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvčge"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Sučde"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Pays-Bas"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italie"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Autriche"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "États-Unis"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr ""
-"Avant d'utiliser un logiciel de partitionnement de disques,\n"
-"il est prudent de faire une copie de sauvegarde de vos données !!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "MISE EN GARDE"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si vous voulez utiliser Ť aboot ť, vous devez réserver\n"
-"un espace libre d'au moins 2048 secteurs au début du disque."
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erreur"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Assistant"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Choisissez une action"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Votre disque possčde une seule grande partition, qui est de type FAT\n"
-"(généralement utilisé par Microsoft DOS ou Windows).\n"
-"Vous devriez la réduire pour pouvoir créer d'autres partitions :\n"
-"cliquez sur la partition puis sur Ť Redimensionner ť."
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Veuillez cliquer sur une partition"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Détails"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "SF journalisé"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Vide"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Autre"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Types des systčmes de fichiers :"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Créer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Type"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilisez plutôt Ť %s ť"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Supprimer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Cliquez d'abord sur Ť Démonter ť"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Aprčs avoir modifié le type de la partition %s, toutes les données\n"
-"présentes sur cette partition seront perdues."
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Choisissez une partition"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Choisissez une autre partition"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Quitter"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Passer en mode expert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Passer en mode normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "État précédent"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Désirez-vous tout de męme continuer ?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Quitter sans sauvegarder"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Désirez-vous réellement quitter sans écrire la table des partitions ?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Désirez-vous sauvegarder les modifications de /etc/fstab"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Partitionnement automatique"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Supprimer toutes les partitions"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Informations sur les disques durs"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Toutes les partitions primaires sont utilisées"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Impossible d'ajouter une partition"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Pour pouvoir utiliser plus de partitions, vous devez d'abord en supprimer "
-"une pour la remplacer par une partition étendue."
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Sauvegarder la table des partitions..."
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Charger une table des partitions..."
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Deviner automatiquement la table des partitions"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Relire la table des partitions"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Auto-montage des périphériques amovibles"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Sélectionnez un fichier"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La table des partitions contenue sur la sauvegarde\n"
-"n'a pas la męme taille que le disque.\n"
-"Désirez-vous tout de męme continuer ?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Attention"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insérez une disquette dans le lecteur.\n"
-"Toutes les données présentes sur cette disquette seront perdues."
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentative de lecture de l'organisation des partitions..."
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Informations détaillées"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Point de montage"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Options"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionner"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Déplacer"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formater"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Monter"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Ajouter au RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Ajouter au LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Démonter"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Supprimer du RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Supprimer du LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modifier le RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Utiliser pour loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Créer une nouvelle partition"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Secteur de début : "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Taille en Mo : "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Type du systčme de fichiers : "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Point de montage : "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Préférence : "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Supprimer le fichier loopback ?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Changement du type de partition"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Quel systčme de fichiers désirez-vous utiliser ?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Passage de ext2 ŕ ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Oů désirez-vous monter le fichier loopback %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Oů désirez-vous monter la partition %s ?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Il est impossible de désélectionner ce point de montage car il est\n"
-"utilisé pour le loopback. Veuillez supprimer ce dernier d'abord."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calcul des limites du systčme de fichiers FAT ..."
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionnement"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Cette partition ne peut pas ętre redimensionnée"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Toutes les données présentes sur cette partition\n"
-"devraient avoir été sauvegardées."
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Aprčs avoir redimensionné la partition %s, toutes les données présentes\n"
-"sur cette partition seront perdues"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Choisissez la nouvelle taille"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nouvelle taille en Mo : "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Sur quel disque voulez-vous la déplacer ?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Secteur"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Sur quel secteur voulez-vous la déplacer ?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Déplacement"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Déplacement de la partition..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Choisissez un RAID existant"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "Nouveau"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Choisissez un LVM existant"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Nom LVM ?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Cette partition ne peut pas ętre utilisée pour du loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nom du fichier loopback :"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Donnez un nom de fichier"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ce fichier est déjŕ utilisé par un autre loopback.\n"
-"Veuillez en choisir un autre."
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Le fichier existe déjŕ. Faut-il l'utiliser ?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Options de montage"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Divers"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "Périphérique"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "Niveau de RAID"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "Taille de bloc"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Soyez prudent : cette opération est dangereuse."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Quel type de partitionnement ?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Le programme d'amorçage LILO ne peut pas fonctionner si vous placez\n"
-"la partition du dossier /boot aussi loin sur le disque (c'est-ŕ-dire\n"
-"au delŕ du 1024čme cylindre). Si vous n'utilisez pas LILO, vous n'avez\n"
-"pas besoin de partition spécifique pour le dossier /boot."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Attention, votre partition racine se situe au delŕ du 1024čme cylindre.\n"
-"Si vous comptez utiliser le programme d'amorçage LILO, vous devez créer\n"
-"une autre partition juste pour le dossier /boot en deçŕ du 1024čme cylindre."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Attention, vous avez choisi une partition RAID logiciel comme partition\n"
-"racine. Pour que votre systčme puisse démarrer, vous devez ajouter\n"
-"une partition non RAID, spécifique pour le dossier /boot."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-"La table des partitions de %s va maintenant ętre écrite sur le disque !"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Vous devez redémarrer pour que les modifications soient prises en compte"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Aprčs avoir formaté la partition %s, toutes les données présentes\n"
-"sur cette partition seront perdues."
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatage"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatage du fichier loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatage de la partition %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Cacher les fichiers"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Déplacer les fichiers sur la nouvelle partition"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Le dossier %s contient déjŕ des données\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Déplacement des fichiers sur la nouvelle partition..."
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Copie de %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Suppression de %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partition %s est maintenant connue comme %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Périphérique : "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lettre de lecteur DOS supposée : %s:\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Type : "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nom : "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Début : secteur %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Taille : %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s secteurs"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylindre %d ŕ %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatée\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Non formatée\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montée\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "Appartient au RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Fichier(s) loopback :\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition d'amorçage par défaut\n"
-"(pour DOS/Windows, pas pour LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "RAID de niveau %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Taille de bloc %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "disques RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom du fichier loopback : %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Il y a des chances que cette partition\n"
-"soit une partition de pilotes systčmes,\n"
-"vous ne devriez pas la toucher.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Cette partition d'amorçage (bootstrap)\n"
-"est nécessaire si vous avez plusieurs\n"
-"systčmes d'exploitation. \n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Taille : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Géométrie : %s cylindres, %s tętes, %s secteurs\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Information : "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "disques LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Table des partitions de type : %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "sur bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Options : %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Clef de chiffrement du systčme de fichiers"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Choisissez la clef de chiffrement du systčme de fichiers"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Cette clef de chiffrement est trop courte (minimum %d caractčres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Les clefs de chiffrement ne correspondent pas"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Clef de chiffrement"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Clef de chiffrement (confirmation)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Changer le type"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Veuillez cliquer sur une source"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Rechercher les serveurs"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "le formatage au format %s de %s a échoué"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Impossible de formater %s au format %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "le montage de la partition %s dans le répertoire %s a échoué"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck a échoué avec le code de sortie %d ou le signal %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Le démontage de %s a échoué : %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "avec /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "serveur"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Les partitions JFS doivent faire plus de 16 Mo."
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Les partitions ReiserFS doivent faire plus de 32 Mo."
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Les points de montage doivent commencer par /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Le point de montage %s est déjŕ utilisé\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Vous ne pouvez pas utiliser une partition logique LVM pour le point de "
-"montage %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ce dossier devrait rester dans la partition racine"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Vous avez besoin d'un vrai systčme de fichiers (ext2, reiserfs) pour ce "
-"point de montage\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Vous ne pouvez pas utiliser de systčme de fichiers crypté pour le point de "
-"montage %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Pas assez d'espace libre pour le partitionnement automatique"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Rien ŕ faire"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erreur lors de l'ouverture de %s en écriture : %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Une erreur est survenue : aucun périphérique valide n'a été trouvé pour\n"
-"créer de nouvelles partitions. Veuillez vérifier votre matériel."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Vous n'avez défini aucune partition !"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux est un systčme multi-utilisateurs, ce qui signifie généralement que chaque\n"
-"utilisateur peut avoir des préférences différences, ses propres fichiers,\n"
-"etc. Pour plus d'informations, consultez le manuel d'utilisation.\n"
-"Contrairement ŕ Ť root ť qui a tous les droits, les utilisateurs que vous\n"
-"ajouterez ici n'auront que des permissions pour agir sur leurs propres\n"
-"fichiers exclusivement.\n"
-"\n"
-"L'utilisateur/administrateur devrait également se créer un compte\n"
-"Ť normal ť. C'est ŕ travers cet utilisateur que celui-ci devrait se\n"
-"connecter pour accomplir ses tâches quotidiennes. Car, bien qu'il soit\n"
-"pratique d'avoir tous les accčs, cette situation peut également engendrer\n"
-"des situations désastreuses si un fichier est détruit par inadvertance. Un\n"
-"utilisateur normal n'ayant pas accčs aux fichiers sensibles, ne peut causer\n"
-"de dommages majeurs.\n"
-"\n"
-"Il faut d'abord entrer le vrai nom de la personne. Évidemment, vous pouvez\n"
-"y inscrire n'importe quoi. DrakX prendra le premier mot inséré et le\n"
-"transposera comme Ť Nom de login ť. C'est le nom qui sera utilisé pour se\n"
-"connecter au systčme. Vous pouvez le modifier. Il faut maintenant entrer un\n"
-"mot de passe. Celui-ci n'est pas aussi crucial que le mot de passe de\n"
-"Ť root ť, mais ce n'est pas une raison pour rentrer 123456. Aprčs tout,\n"
-"ceci mettrait vos fichiers en péril.\n"
-"\n"
-"Si vous cliquez Ť Accepter ť, il vous sera possible d'ajouter d'autres\n"
-"utilisateurs. Créez un utilisateur différent pour chaque personne devant\n"
-"utiliser votre ordinateur. Une fois chaque utilisateur défini, cliquez sur\n"
-"Ť Terminer ť.\n"
-"\n"
-"En cliquant sur Ť Avancé ť, vous pourrez sélectionner un Ť shell ť\n"
-"différent pour cet utilisateur (bash est assigné par défaut)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ci-dessus sont listées les partitions linux existantes détectées sur votre "
-"systčme.\n"
-"Vous pouvez garder les choix faits par l'assistant, ils sont corrects pour "
-"la plupart\n"
-"des installations courantes. Si vous changez quoi que ce soit, vous devez au "
-"moins\n"
-"définir une partition racine Ť / ť. Ne choisissez pas une partition trop "
-"petite, sinon\n"
-"vous ne pourrez pas installer assez de logiciels. Si vous voulez stocker vos "
-"données\n"
-"sur une partition séparée, vous devrez également créer une partition pour le "
-"dossier\n"
-"Ť /home ť (seulement possible si vous avez au moins deux partitions linux "
-"disponibles).\n"
-"\n"
-"Chaque partition est décrite comme suit : Ť Nom ť, Ť Capacité ť.\n"
-"\n"
-"Le Ť Nom ť est codé comme suit : Ť type du disque dur ť,\n"
-"Ť numéro du disque dur ť, Ť numéro de la partition ť (par exemple,\n"
-"Ť hda1 ť).\n"
-"\n"
-"Le Ť type du disque dur ť est Ť hd ť si votre disque dur\n"
-"est un disque dur IDE ou Ť sd ť s'il s'agit d'un disque SCSI.\n"
-"\n"
-"Le Ť numéro du disque dur ť est toujours une lettre qui suit Ť hd ť ou Ť sd "
-"ť :\n"
-"- avec un disque dur IDE,\n"
-" * Ť a ť signifie Ť disque maître sur le premier port IDE ť,\n"
-" * Ť b ť signifie Ť disque esclave sur le premier port IDE ť,\n"
-" * Ť c ť signifie Ť disque maître sur le second port IDE ť,\n"
-" * Ť d ť signifie Ť disque esclave sur le second port IDE ť.\n"
-"- avec un disque dur SCSI, un Ť a ť signifie Ť premier disque dur ť,\n"
-"Ť b ť signifie Ť second disque dur ť, etc. dans l'ordre des IDs SCSIť."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Les paquetages requis ŕ l'installation de Mandrake Linux sont distribués sur plusieurs\n"
-"CDROM. Heureusement, DrakX connaît l'emplacement de chacun des paquetages.\n"
-"Il éjectera celui présent dans le lecteur et vous demandera d'insérer le\n"
-"CDROM approprié, selon le cas."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"C'est maintenant le moment de choisir les paquetages qui seront installés\n"
-"sur votre systčme. Sachez que Mandrake Linux contient plusieurs milliers de paquetages ŕ\n"
-"installer, et qu'il n'est pas nécessaire de tous les connaître par coeur.\n"
-"\n"
-"Si vous ętes en train de faire une installation normale ŕ partir d'un\n"
-"CDROM, il vous sera d'abord demandé de spécifier quel CD vous avez (en mode\n"
-"Expert). Vérifier les étiquettes et cliquez sur les boîtes leur étant\n"
-"associées. Cliquez sur Ť OK ť, lorsque vous ętes pręt ŕ continuer.\n"
-"\n"
-"Les paquetages sont regroupés selon la nature de l'installation. Les\n"
-"groupes sont divisés en quatre sections principales:\n"
-"\n"
-" * Ť Station de travail ť: si vous comptez utiliser votre machine ainsi,\n"
-"sélectionner un ou plusieurs groupes y correspondant.\n"
-"\n"
-" * Ť Environnement graphique ť: ce groupe vous permettra de déterminer quel\n"
-"environnement graphique vous voulez avoir sur votre systčme. Évidemment, il\n"
-"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
-"\n"
-" * Ť Développement ť: si votre systčme sera utilisé pour la programmation,\n"
-"choisissez les groupes désirés.\n"
-"\n"
-" * Ť Serveur ť: finalement, si vous systčme doit agir en tant que serveur,\n"
-"vous pourrez sélectionner les services que vous voulez installer.\n"
-"\n"
-" * Ť Environnement graphique ť: ce groupe vous permettra de déterminer quel\n"
-"environnement graphique vous voulez avoir sur votre systčme. Évidemment, il\n"
-"vous en faut au moins un pour utiliser votre station en mode graphique.\n"
-"\n"
-"En plaçant votre souris au dessus d'un nom de groupe, vous verrez\n"
-"apparaître une courte description de ce groupe. Si vous désélectionnez tous\n"
-"les groupes lors d'une installation standard (par opposition ŕ une mise ŕ\n"
-"jour), un dialogue apparaîtra proposant différentes options pour une\n"
-"installation minimale:\n"
-"\n"
-" * Ť Avec X ť: installe le moins de paquetages possible pour avoir un\n"
-"environnement de travail graphique;\n"
-"\n"
-" * Ť Avec la documentation de base ť: installe le systčme de base plus\n"
-"certains utilitaires de base et leur documentation. Cette installation est\n"
-"utilisable comme base pour monter un serveur;\n"
-"\n"
-" * Ť Installation vraiment minimale ť: installera le strict minimum\n"
-"nécessaire pour obtenir un systčme fonctionnel, en ligne de commande. Cette\n"
-"installation prends ŕ peu prčs 65Mo.\n"
-"\n"
-"Vous pouvez finalement cocher l'option Ť Sélection individuelle des\n"
-"paquetages ť. Cette option est ŕ utiliser si vous connaissez exactement le\n"
-"paquetage désiré ou si vous voulez avoir le contrôle total de votre\n"
-"installation.\n"
-"\n"
-"Si vous avez démarré l'installation en mode \"mise ŕ jour\", vous pouvez\n"
-"\"dé-sélectionner\" tous les groupes afin d'éviter l'installation de\n"
-"nouveaux programmes. Cette option est trčs utile pour restaurer un systčme\n"
-"défectueux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Finalement, si vous avez choisi de sélectionner individuellement les\n"
-"paquetages ŕ installer, DrakX vous présentera un arbre contenant tous les\n"
-"paquetages, classés par groupes et sous-groupes. En naviguant ŕ travers\n"
-"l'arbre, vous pouvez sélectionner des groupes, des sous-groupes ou des\n"
-"paquetages individuels.\n"
-"\n"
-"Dčs que vous sélectionnez un paquetage dans l'arbre, une descriptions\n"
-"apparaît ŕ droite. Une fois votre sélection complétée, cliquez sur\n"
-"Ť Installation ť pour lancer le processus. Soyez patient, car en fonction\n"
-"du type d'installation choisi ou du nombre de paquetages sélectionnés, le\n"
-"temps requis peut ętre substantiellement différent. Une estimation du temps\n"
-"requis est présentée sur l'écran en cours d'opération afin de vous\n"
-"permettre d'évaluer de combien de temps vous disposez pour prendre votre\n"
-"déjeuner.\n"
-"\n"
-"!! Si un logiciel serveur a été sélectionné, vous devrez confirmer que vous\n"
-"voulez vraiment que celui-ci soit installé. Sous Mandrake, par défaut, tous\n"
-"les serveurs installés sont lancés au démarrage. Malgré tous les efforts\n"
-"investis pour vous livrer une distribution Linux sécuritaire, il est\n"
-"possible que certaines failles de sécurité affectes les serveurs installés\n"
-"au-delŕ de la date de publication. Si vous ne savez pas précisément ŕ quoi\n"
-"sert un serveur en particulier ou pourquoi il est installé, cliquez sur\n"
-"Ť NON ť. En cliquant sur Ť OUI ť, le serveur sera installé et le service\n"
-"rendu disponible au démarrage. !!\n"
-"\n"
-"L'option Ť Dépendances automatiques ť désactive les avertissements qui\n"
-"apparaissent ŕ chaque fois que l'installeur sélectionne un nouveau paquet.\n"
-"Ces avertissements surviennent parce que DrakX a déterminé que pour qu'un\n"
-"paquetage soit fonctionnel, il lui en faut un autre dont il est dépendant.\n"
-"\n"
-"La petite icône de disquette qui apparaît au bas de la liste permet de\n"
-"récupérer une liste de paquetages sélectionnés durant une autre\n"
-"installation. En cliquant dessus, on vous demandera d'insérer la disquette\n"
-"créée lors d'une installation précédente. Voir la deuxičme note de la\n"
-"derničre étape afin de savoir comment créer une telle disquette."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Si vous désirez connecter votre systčme ŕ un réseau ou ŕ l'Internet,\n"
-"cliquez sur Ť OK ť. L'autodétection des périphériques réseau et modems sera\n"
-"alors lancée. Si cette détection échoue, décochez la case Ť Utiliser\n"
-"l'autodétection ť. Vous pouvez aussi choisir de ne pas configurer le\n"
-"réseau, ou de le faire plus tard. Dans ce cas, cliquez simplement sur\n"
-"Ť Annuler ť.\n"
-"\n"
-"Les types de connexion supportées sont: modem téléphonique, modem ISDN,\n"
-"connexion ADSL, modem câble ou simplement LAN (réseau ethernet).\n"
-"\n"
-"Nous ne détaillerons pas ici chacune des configurations possible. Assurez\n"
-"vous seulement que vous avez toutes les informations de votre fournisseur\n"
-"de service Internet ŕ portée de main.\n"
-"\n"
-"Vous pouvez consulter le chapitre du ŤGuide de l'utilisateurť concernant les connexions ŕ Internet\n"
-"pour plus de détails ŕ propos des configurations spécifiques de chaque type\n"
-"de connexion. Vous pouvez également configurer votre connexion ŕ Internet\n"
-"une fois l'installation terminée.\n"
-"\n"
-"Si vous désirez configurer votre réseau plus tard ou si vous avez terminé\n"
-"l'installation de votre réseau, cliquez sur Ť Annuler ť."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Vous pouvez maintenant choisir les services disponibles au démarrage de\n"
-"votre systčme.\n"
-"\n"
-"Ici sont présentés tous les services disponibles avec l'installation en\n"
-"place. Faites une bonne vérification et enlevez tout ce qui n'est pas\n"
-"absolument nécessaire au démarrage du systčme.\n"
-"\n"
-"Vous pouvez obtenir une courte explication des services en les\n"
-"sélectionnant spécifiquement. Cela dit, si vous n'ętes pas certain de\n"
-"l'application d'un service, conservez les paramčtres par défaut\n"
-"\n"
-"!! Ŕ cette étape, soyez particuličrement attentif dans le cas d'un systčme\n"
-"destiné ŕ agir comme serveur. Dans ce cas, vous voudrez probablement\n"
-"permettre exclusivement les services nécessaires. !!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU-Linux manipule l'heure au format GMT (Greenwich Mean Time) et la "
-"convertit en\n"
-"temps local selon le fuseau horaire choisi. Il est néanmoins possible de\n"
-"désactiver cela en désélectionnant Ť Horloge systčme réglée sur le méridien\n"
-"de Greenwich ť de façon ŕ ce que l'horloge matérielle soit la męme que\n"
-"celle du systčme. Cela est particuličrement utile si la machine accueille\n"
-"un autre systčme d'exploitation tel que .\n"
-"\n"
-"La Ť Synchronisation automatique ť permet de régler l'heure automatiquement\n"
-"en se connectant ŕ un serveur de temps sur Internet. Dans la liste qui est\n"
-"alors présentée, choisissez un serveur géographiquement proche de vous.\n"
-"Vous devez avoir une connexion Internet pour que cela fonctionne bien\n"
-"entendu. Cela installera en fait sur votre machine un serveur de temps\n"
-"local qui pourra optionnellement ętre lui-męme utilisé par d'autres\n"
-"machines de votre réseau local."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (pour le X Window system) est le coeur de votre interface graphique sous\n"
-"GNU/Linux. Tous les environnements graphiques (Gnome, KDE, Afterstep, ...) présents\n"
-"sur Mandrake Linux dépendent de X. A cette étape, DrakX, va tenter de le configurer\n"
-"automatiquement.\n"
-"\n"
-"Il est trčs rare que cette étape échoue, ŕ moins d'avoir un équipement\n"
-"obsolčte (ou trop récent). Si le processus réussit, il va démarrer X\n"
-"automatiquement avec la meilleure résolution d'écran possible, en fonction\n"
-"de la taille du moniteur. Une fenętre apparaît alors vous demandant si\n"
-"cette configuration vous convient.\n"
-"\n"
-"Si vous faites une installation Ť Expert ť, vous entrerez dans\n"
-"l'information de configuration de X. Voir les sections correspondantes du\n"
-"manuel pour plus d'information.\n"
-"\n"
-"Si vous pouvez voir le message et cliquez sur oui, DrakX continuera ŕ la\n"
-"prochaine étape. Si vous ne pouvez voir la fenętre, ceci signifie que le\n"
-"test a échoué et vous serez ramené ŕ l'écran précédant en 10 secondes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Il se peut que vous ne soyez pas entičrement satisfait ŕ la premičre\n"
-"tentative de configuration graphique (écran trop petit, peu de\n"
-"couleurs...). Ainsi, męme si X démarre correctement, DrakX vous demande si\n"
-"la configuration vous convient. Il proposera aussi de la changer en\n"
-"affichant une liste des modes valides, si possible.\n"
-"\n"
-"En dernier recours, si vous ne pouvez pas faire fonctionner X, choisissez\n"
-"Ť Changer la carte graphique ť, sélectionnez Ť carte non listée ť, et\n"
-"lorsqu'il vous sera demandé le serveur graphique, choisissez Ť FBDev ť.\n"
-"c'est une option de secours qui fonctionnera sur n'importe quelle carte\n"
-"graphique moderne. Choisissez ensuite Ť Tester ŕ nouveau ť pour vous\n"
-"assurer que tout va bien."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Finalement, il vous sera demandé si vous souhaitez obtenir l'interface\n"
-"graphique dčs le démarrage ou non. Notez que cette question sera posée męme\n"
-"si vous choisissez de ne pas tester la configuration. Il est évidemment\n"
-"souhaitable de répondre Ť Non ť si cette machine est un serveur sur\n"
-"laquelle personne n'est censée travailler en mode graphique."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"Le CDROM d'installation de Mandrake Linux a un mode de récupération prédéfini. Vous pouvez\n"
-"y accéder en démarrant l'ordinateur sur le CDROM. Selon la version de votre\n"
-"Ť BIOS ť, il faut lui spécifier de démarrer sur le CDROM. Vous devriez\n"
-"revenir au disquette de démarrage dans deux cas précis :\n"
-"\n"
-" * Au moment d'installer le Ť Programme d'amorce ť, DrakX va réécrire sur le\n"
-"secteur (MBR) contenant le programme d'amorce (boot loader) afin de vous\n"
-"permettre de démarrer avec Linux ou Windows (en prenant pour acquis que\n"
-"vous avez deux systčmes d'exploitation installés. Si vous réinstallez\n"
-"Windows, celui-ci va réécrire sur le MBR et il vous sera désormais\n"
-"impossible de démarrer Linux.\n"
-"\n"
-" * Si un problčme survient et qu'il vous est impossible de démarrer ŕ partir\n"
-"du disque dur, cette disquette deviendra votre seul moyen de démarrer votre\n"
-"systčme Linux. Elle contient un bon nombre d'outils pour récupérer un\n"
-"systčme défectueux, peu importe la source du problčme.\n"
-"\n"
-"En cliquant sur cette étape, on vous demandera d'insérer une disquette. La\n"
-"disquette insérée sera complčtement effacée et DrakX se chargera de la\n"
-"formater et d'y insérer les fichiers nécessaires."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Cette étape vous permet de déterminer précisément l'emplacement de votre\n"
-"installation de Mandrake Linux. Si votre disque est vide ou utilisé par un autre systčme\n"
-"d'exploitation, vous devrez repartitionner votre disque. Partitionner un\n"
-"disque signifie de le diviser précisément afin de créer un espace pour\n"
-"votre installation.\n"
-"\n"
-"Comme les effets du partition sont irréversibles (l'ensemble du disque est\n"
-"effacé), le partitionnement est généralement intimidant et stressant pour\n"
-"un utilisateur inexpérimenté. Heureusement, une interface a été prévue ŕ\n"
-"cet effet. Avant de commencer, révisez vos manuels et surtout, prenez votre\n"
-"temps.\n"
-"\n"
-"Si vous ętes en mode expert, l'application DiskDrake, l'outil de\n"
-"partitionnement de Mandrake Linux, vous permettra de déterminer précisément l'emplacement\n"
-"de chacune de vos partitions. Ŕ partir de l'interface d'installation, vous\n"
-"pouvez lancer les assistants en cliquant sur Ť Assistant ť.\n"
-"\n"
-"Si des partitions ont déjŕ été définies, peu importe qu'elles proviennent\n"
-"d'une autre installation ou d'un autre outil de partitionnement, il vous\n"
-"suffit de simplement choisir sur quelle partition vous voulez installer\n"
-"Mandrake.\n"
-"\n"
-"Si vos partitions ne sont pas définies, vous devrez les créer en utilisant\n"
-"l'assistant. Selon la configuration de votre disque, plusieurs options sont\n"
-"disponibles :\n"
-"\n"
-" * Ť Utilisez l'espace disponible ť: cette option tentera simplement de\n"
-"partitionner automatiquement l'espace inutilisé sur votre disque. Il n'y\n"
-"aura pas d'autre question.\n"
-"\n"
-" * Ť Utiliser les partitions existantes ť: l' assistant a détecté une ou\n"
-"plusieurs partitions existants sur votre disque. Si vous voulez les\n"
-"utiliser, choisissez cette option.\n"
-"\n"
-" * Ť Utilisez l'espace libre sur une partition Windows ť: si Microsoft Windows est installé\n"
-"sur votre disque et prend l'ensemble de l'espace vous devez créer une place\n"
-"pour votre installation Mandrake. Pour ce faire, vous pouvez tout effacer\n"
-"(voir Ť effacer tout le disque ť ou Ť Mode expert ť) ou vous pouvez\n"
-"redimensionner l'espace utilisé par GNU/Linux. Le redimensionnement peut ętre\n"
-"effectué sans pertes de données, ŕ condition que vous ayez préalablement\n"
-"défragmenté la partition Windows. Une sauvegarde de Vos données ne fera pas de mal\n"
-"non plus. Cette seconde option peut ętre accomplie sans perte de données.\n"
-"Cette solution est recommandée pour faire cohabiter Linux et Windows sur le\n"
-"męme ordinateur.\n"
-"\n"
-" Avant de choisir cette option, il faut comprendre qu'aprčs cette procédure\n"
-"l'espace disponible pour Windows sera réduit. Vous aurez moins d'espace\n"
-"pour installer des logiciels ou sauvegarder de l'information avec Windows.\n"
-"\n"
-" * Ť Effacer tout le disque ť: si vous voulez effacer toutes les données et\n"
-"les applications installées sur votre systčme et les remplacer par votre\n"
-"nouveau systčme Mandrake Linux, choisissez cette option. Soyez prudent, car ce choix est\n"
-"irréversible et permanent. Il vous sera impossible de retrouver vos données\n"
-"effacées.\n"
-"\n"
-" !! En choisissant cette option, l'ensemble du contenu de votre disque sera\n"
-"détruit. !!\n"
-"\n"
-" * Ť Supprimer Microsoft Windows ť: ce choix effacera tout simplement ce que\n"
-"contient le disque et recommencera ŕ zéro. Toutes les données et les\n"
-"programmes présents sur le disque seront effacés.\n"
-"\n"
-" !! En choisissant cette option, l'ensemble de votre disque sera effacé. !!\n"
-"\n"
-" * Ť Mode expert ť: permet de partitionner manuellement votre disque. Soyez\n"
-"prudent, parce que bien que plus puissante, cette option est dangereuse.\n"
-"Vous pouvez facilement perdre l'ensemble du contenu d'un disque. Donc, ne\n"
-"choisissez pas cette option si vous ne savez pas exactement ce que vous\n"
-"devez faire."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"Votre installation de Mandrake Linux est maintenant terminée et votre systčme est pręt ŕ\n"
-"ętre utilisé. Cliquez sur Ť OK ť pour redémarrer votre systčme. Vous aurez\n"
-"alors le choix de démarrer ou Windows (s'il est présent).\n"
-"\n"
-"Le bouton Ť Avancée ť (en mode Expert uniquement) permet deux autres\n"
-"options:\n"
-"\n"
-" * Ť Générer une disquette d'auto-install ť: Pour créer une disquette\n"
-"d'installation qui permettra de reproduire l'installation que vous venez de\n"
-"réaliser sans l'aide d'un administrateur.\n"
-"\n"
-" Notez que les deux options suivantes apparaissent aprčs avoir cliqué sur le\n"
-"bouton:\n"
-"\n"
-" * Ť Replay ť. C'est une installation partiellement automatique oů il est\n"
-"possible de personnaliser le partitionnement du disque (exclusivement).\n"
-"\n"
-" * Ť Automatique ť. Complčtement automatique, cette installation reformate\n"
-"le disque au complet.\n"
-"\n"
-" Cette fonctionnalité est particuličrement pratique pour l'installation de\n"
-"multiples systčmes. Voir la sectionAuto install de notre site Web.\n"
-"\n"
-" * Ť Sauvegarder les paquetages sélectionnés ť(*) sauve la sélection des\n"
-"paquetages installés. Puis, lorsque vous ferez une autre installation,\n"
-"insérer la disquette dans le lecteur et accéder au menu d'aide en tapant\n"
-"[f1], et entrez la commande suivante: Ť linux defcfg=\"floppy\" ť.\n"
-"\n"
-"(*) Vous avez besoin d'une disquette formatée avec FAT (pour la créer sous\n"
-"Linux, tapez Ť mformat a: ť)"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Chaque partition nouvellement définie doit ętre formatée, c'est ŕ dire\n"
-"qu'un systčme de fichier (filesystem) doit y ętre créé.\n"
-"\n"
-"Durant cette étape, vous pouvez également choisir de reformater d'autres\n"
-"partitions existantes afin d'effacer les données qu'elles contiennent. Si\n"
-"c'est ce que vous désirez, il faut également choisir ces partitions.\n"
-"\n"
-"Sachez qu'il n'est pas nécessaire de reformater toutes les partitions\n"
-"existantes. Vous devez reformater les partitions contenant le systčme\n"
-"d'exploitation, (tel que : Ť / ť, Ť /usr ť ou Ť /var ť) mais vous n'avez\n"
-"pas ŕ reformater les partitions de données que vous voulez garder,\n"
-"habituellement Ť /home ť.\n"
-"\n"
-"Restez prudent au moment de sélectionner les partitions. Une fois formatée,\n"
-"toutes les données contenues sur les partitions sélectionnées seront\n"
-"détruites et il sera impossible de les récupérer.\n"
-"\n"
-"Cliquez sur Ť OK ť lorsque vous ętre pręt ŕ formater vos partitions.\n"
-"\n"
-"Cliquez sur Ť Annuler ť si vous voulez choisir d'autres partitions pour\n"
-"votre installation.\n"
-"\n"
-"Cliquez sur Ť Avancé ť, si vous désirez choisir les partitions qui seront\n"
-"vérifiées pour des secteurs corrompus."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Votre nouveau systčme Mandrake Linux est maintenant en cours d'installation. Selon le\n"
-"nombre de paquetages ŕ installer et la puissance de votre ordinateur, cette\n"
-"opération peut prendre de quelques minutes ŕ quelques heures."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-"Au moment oů vous ętes en train d'installer Mandrake Linux, il est possible que certains\n"
-"paquetages aient été mis ŕ jour depuis la sortie du produit. Des bogues ont\n"
-"pu ętre corrigés, et des problčmes de sécurité résolus. Pour vous permettre\n"
-"de bénéficier de ces mises ŕ jour, il vous est maintenant proposé de les\n"
-"télé-charger sur Internet. Choisissez Ť Oui ť si vous avez une connexion\n"
-"Internet, ou Ť Non ť si vous préférez installer les mises ŕ jour plus tard.\n"
-"\n"
-"En choisissant Ť Oui ť, la liste des sites depuis lesquels les mises ŕ\n"
-"jours peuvent ętre télé-chargées est affichée. Choisissez le site le plus\n"
-"proche. Puis un arbre de choix des paquetages apparaît: vérifiez la\n"
-"sélection, puis cliquez sur Ť Installer ť pour télé-charger et installer\n"
-"les mises ŕ jour sélectionnées, ou Ť Annuler ť pour abandonner."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Avant d'aller plus loin, il est fortement recommandé de lire attentivement\n"
-"les termes et conditions d'utilisations de la licence. Celle-ci régit\n"
-"l'ensemble de la distribution Mandrake Linux. Si, pour une raison ou une\n"
-"autre, vous n'acceptez pas ces conditions, cliquez sur Ť Refuser ť.\n"
-"L'installation sera alors immédiatement interrompue. Pour continuer,\n"
-"cliquez sur Ť Accepter ť."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Ŕ cette étape, vous devrez déterminer le niveau de sécurité requis par\n"
-"votre systčme. Le niveau de sécurité requis se détermine en fonction de\n"
-"l'exposition du systčme ŕ d'autres utilisateurs (s'il est connecté\n"
-"directement sur Internet par exemple) et selon le niveau de sensibilité de\n"
-"l'information contenu dans le systčme (des numéros de carte de crédit par\n"
-"exemple). Sachez que, de maničre générale, plus la sécurité d'un systčme\n"
-"est élevée, plus il est complexe ŕ opérer. Référez-vous au chapitre\n"
-"Ť msec ť du Ť Manuel de référence ť pour obtenir plus d'informations sur\n"
-"les niveaux de sécurité.\n"
-"\n"
-"Si vous ne savez pas quel niveau choisir, gardez la sélection par défaut."
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"A cette étape, vous devez choisir quelles partitions seront utilisées pour\n"
-"l'installation de votre systčme Mandrake Linux. Si des partitions ont déjŕ\n"
-"été définies, soit par une installation précédente de GNU/Linux soit grace\n"
-"ŕ un autre outil de partitionnement, vous pouvez les utiliser.\n"
-"Sinon, de nouvelles partitions doivent ętre définies.\n"
-"\n"
-"Pour ce faire, vous devez d'abord sélectionner un disque dur. Vous pouvez\n"
-"ainsi cliquer sur Ť hda ť pour choisir le premier disque IDE (primary "
-"master),\n"
-"Ť hdb ť pour le deuxičme disque IDE (primary slave), Ť sda ť pour le \n"
-"premier disque SCSI, Ť sdb ť pour le second, etc.\n"
-"\n"
-"Pour partitionner le disque sélectionné, vous pouvez utiliser ces options :\n"
-"\n"
-"- Ť Supprimer toutes les partitions ť : efface toutes les partitions du\n"
-"disque choisi. \n"
-"\n"
-"- Ť Partitionnement automatique ť : crée automatiquement les partitions\n"
-"Ext2 et Swap dans l'espace libre du disque. \n"
-"\n"
-"- Ť Davantage ť : donne accčs ŕ des fonctionnalités supplémentaires. \n"
-"\n"
-"- Ť Sauvegarder la table des partitions... ť : sauve la table des "
-"partitions\n"
-" sur une disquette, ce qui est fortement recommandé. Cela peut ętre\n"
-"trčs utile pour la restaurer si elle est endommagée. \n"
-"\n"
-"- Ť Charger une table des partitions... ť : permet de restaurer une table\n"
-"des partitions ŕ partir d'une disquette.\n"
-"\n"
-"- Ť Deviner automatiquement la table des partitions ť : si votre table des\n"
-"partitions est endommagée, vous pouvez essayer de la récuperer \n"
-"automatiquement grace ŕ cette option. Soyez prudent et rappelez-vous\n"
-"que cela peut échouer.\n"
-"\n"
-"- Ť Relire la table des partitions ť : annule tous les changements et \n"
-"recharge votre table des partitions initiale.\n"
-"\n"
-"- Ť Auto-montage des périphériques amovibles ť : désélectionner cette\n"
-"option obligera les utilisateurs ŕ monter et démonter manuellement les\n"
-"périphériques amovibles tels que les disquettes ou cédéroms.\n"
-"\n"
-"- Ť Assistant ť : ŕ utiliser si vous n'avez pas une bonne connaissance\n"
-"du partitionnement.\n"
-"\n"
-"- Ť État précédent ť : pour annuler vos derničres modifications.\n"
-"\n"
-"- Ť Passer en mode expert ť : permet des actions supplémentaires\n"
-"(Type de partition, options, formatage), et donne plus d'informations.\n"
-"\n"
-"- Ť Terminer ť : enregistre physiquement vos changements sur le disque.\n"
-"\n"
-"Note : vous pouvez atteindre les options grace au clavier, en utilisant la\n"
-"touche <Tab> et les flčches haut/bas.\n"
-"Quand une partition est sélectionnée, vous pouvez utiliser :\n"
-"- <Ctrl-C> pour créer une nouvelle partition lorsque une partition vide\n"
-"est sélectionnée. \n"
-"- <Ctrl-D> pour effacer une partition. \n"
-"- <Ctrl-M> pour attribuer un point de montage ŕ la partition.\n"
-"\n"
-"Pour obtenir des informations sur les différents systčmes de fichiers\n"
-"disponibles, vous pouvez lire le chapitre ext2fs du Manuel de Référence.\n"
-"\n"
-"S vous installez une machine ŕ base de PowerPC (Mac), vous devrez\n"
-"créer une petite partition d'amorçage (bootstrap) de type HFS d'au moins\n"
-"1 Mo, qui sera utilisé par le programme d'amorçage Ť yaboot ť. Si vous \n"
-"optez pour une partition un peu plus grande, disons 50 Mo, vous pouvez\n"
-"l'utiliser pour stocker un noyau additionnel et des images ramdisk pour\n"
-" des situations de démarrage de secours."
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Plus d'une partition DOS/Windows ont été détectées sur votre disque dur.\n"
-"Veuillez choisir celle que vous désirez redimensionner pour installer votre\n"
-"nouveau systčme d'exploitation Mandrake Linux.\n"
-"\n"
-"Pour information, chaque partition est décrite comme suit :\n"
-"Ť Nom Linux ť, Ť Nom Windows ť, Ť Capacité ť.\n"
-"\n"
-"Le champ Ť Nom linux  ť est codé comme suit : Ť type du disque dur ť,\n"
-"Ť numéro du disque dur ť, Ť numéro de la partition ť (par exemple,\n"
-"Ť hda1 ť).\n"
-"\n"
-"Le champ Ť type du disque dur ť est Ť hd ť si votre disque dur\n"
-"est un disque dur IDE ou Ť sd ť s'il s'agit d'un disque SCSI.\n"
-"\n"
-"Avec un disque dur IDE,\n"
-" * Ť a ť signifie Ť disque maître sur le premier port IDE ť,\n"
-" * Ť b ť signifie Ť disque esclave sur le premier port IDE ť,\n"
-" * Ť c ť signifie Ť disque maître sur le second port IDE ť,\n"
-" * Ť d ť signifie Ť disque esclave sur le second port IDE ť.\n"
-"\n"
-"Avec un disque dur SCSI, un Ť a ť signifie Ť premier disque dur ť,\n"
-"Ť b ť signifie Ť second disque dur ť, etc. dans l'ordre des IDs SCSIť\n"
-"\n"
-"Le champ Ť Nom Windows ť correspond ŕ la lettre identifiant votre disque\n"
-"dur sous DOS/Windows (le premier disque (ou la premičre partition)\n"
-"est appelé Ť C: ť)."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Veuillez patienter. Cette opération peut prendre plusieurs minutes."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"DrakX doit maintenant savoir quel type d'installation vous désirez\n"
-"réaliser. Deux types d'installations sont proposés: Par défaut (Ť \n"
-"Recommandée ť), qui limite le nombre de questions ŕ l'utilisateur au\n"
-"minimum ou Ť Expert ť qui vous permet de sélectionner individuellement\n"
-"chacune des composantes ŕ installer. Également, on vous propose de faire\n"
-"une Ť Installation ť ou une Ť Mise ŕ jour ť d'un systčme existant:\n"
-"\n"
-" * Ť Installation ť: balaye l'ancien systčme. En fait, selon ce que votre\n"
-"machine comporte, vous pourrez garder intacte certaines des anciennes\n"
-"partition (Linux ou autres);\n"
-"\n"
-" * Ť Mise ŕ jour ť: cette classe d'installation permet de simplement mettre\n"
-"ŕ jours les paquetages qui composent votre systčme GNU/Linux. Elle conserve les\n"
-"partitions existantes, ainsi que la configuration des utilisateurs. Toutes\n"
-"les autres étapes de l'installation sont accessibles en comparaison avec\n"
-"une installation classique;\n"
-"\n"
-" * Ť Mise ŕ jour des paquetages uniquement ť: Cette nouvelle classe\n"
-"d'installation permet de mettre ŕ jour un systčme Mandrake Linux existant, tout en gardant\n"
-"sa configuration inchangée. L'ajout de nouveaux paquetages durant la mise ŕ\n"
-"jour est cependant possible.\n"
-"\n"
-"La mise ŕ jour devrait fonctionner correctement pour les systčmes Mandrake Linux ŕ partir\n"
-"de la version Ť 8.1 ť.\n"
-"\n"
-"Selon votre niveau d'expertise avec les systčmes d'exploitations GNU/Linux, il faut\n"
-"choisir l'un des deux types d'installations suivants:\n"
-"\n"
-" * Ť Recommandée ť: choisissez cette option si vous n'avez jamais installé\n"
-"de systčme d'exploitation GNU/Linux. C'est la méthode la plus facile, la plupart des\n"
-"choix ont déjŕ été fait pour vous.\n"
-"\n"
-" * Expert: si vous avez une bonne connaissance de GNU/Linux, vous pouvez choisir ce\n"
-"type d'installation. Cette méthode vous permettra de personnaliser\n"
-"l'ensemble des composantes de votre systčme. Ces questions peuvent s'avérer\n"
-"complexes, particuličrement en matičre de partitionnement et du choix des\n"
-"paquetages installés. En conséquence, il n'est pas recommandé de s'y\n"
-"aventurer sans de bonnes connaissances au préalable."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-"Normalement, DrakX sélectionne le clavier approprié en fonction de la\n"
-"langue choisie et vous ne devriez pas voir cette étape. Cela dit, il est\n"
-"possible que vous ayez un clavier ne correspondant pas exactement ŕ votre\n"
-"langue d'utilisation. Par exemple, si vous habitez le Québec et parlez le\n"
-"français et l'anglais, vous pouvez vouloir avoir votre clavier anglais pour\n"
-"les tâches d'administration systčme et votre clavier français pour écrire\n"
-"de la poésie. Dans ces cas, il vous faudra revenir ŕ cette étape\n"
-"d'installation et sélectionner un autre clavier ŕ partir de la liste.\n"
-"\n"
-"Vous n'avez qu'a choisir la disposition de clavier qui vous convient.\n"
-"\n"
-"Cliquez sur Ť Davantage ť pour voir toutes les options proposées."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-"Veuillez choisir votre langue de communication. Celle-ci sera utilisée\n"
-"durant le processus d'installation, ainsi que durant les mises ŕ jour de\n"
-"votre systčme.\n"
-"\n"
-"En cliquant sur Ť Avancé ť, le programme vous proposera également d'autres\n"
-"langues pouvant ętre installées sur votre station de travail. En\n"
-"choisissant d'autres langues, le programme vous installera toute la\n"
-"documentation et les applications nécessaires ŕ l'utilisation de cette\n"
-"autre langue. Par exemple, si vous prévoyez d'accueillir des utilisateurs\n"
-"d'Espagne sur votre serveur, choisissez l'anglais comme langue principale,\n"
-"et, dans la section avancée, cliquez sur l'étoile grise correspondant ŕ\n"
-"Spanish|Spain.\n"
-"\n"
-"Sachez que plusieurs langues peuvent ętre installées. Une fois votre\n"
-"sélection complčte terminée, cliquez sur Ť OK ť pour continuer."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-"DrakX détecte généralement le nombre de boutons de votre souris. Sinon, il\n"
-"prend pour acquis que vous avez une souris ŕ deux boutons et configurera\n"
-"l'émulation du troisičme bouton. Également, DrakX saura automatiquement si\n"
-"vous avez une souris PS/2, série ou USB.\n"
-"\n"
-"Si vous désirez installer une souris différente, veuillez la sélectionner ŕ\n"
-"partir de la liste qui vous est proposée.\n"
-"\n"
-"Si vous sélectionnez une souris différente de celle choisie par défaut,\n"
-"DrakX vous présentera un écran de test. Utilisez les boutons et la roue\n"
-"pour vous assurer que tout fonctionne correctement. Si votre souris ne\n"
-"fonctionne pas normalement, appuyer sur la barre d'espacement ou [Entrée]\n"
-"ou encore Ť Annuler ť, puis, sélectionner une autre souris."
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Veuillez sélectionner le bon port. Par exemple, le port Ť COM1 ť de Windows\n"
-" est appelé Ť ttyS0 ť sous GNU-Linux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-"Vous avez ŕ prendre ici une décision cruciale pour la sécurité de votre\n"
-"systčme. L'utilisateur Ť root ť est l'administrateur du systčme qui a tous\n"
-"les droits d'accčs aux fichiers de configuration, etc. Il est donc\n"
-"impératif de choisir un mot de passe difficile ŕ deviner (pensez aux\n"
-"systčmes prévus ŕ cet effet qui anticipent les combinaisons communes des\n"
-"utilisateurs). DrakX vous avertira si le mot de passe entré est trop facile\n"
-"ŕ deviner. Comme vous pouvez le voir, il est également possible de ne pas\n"
-"entrer de mot de passe. Nous déconseillons fortement cette pratique. Comme\n"
-"l'erreur est humaine, un utilisateur avec tous les droits peut tout\n"
-"détruire sur votre systčme, c'est pourquoi le mot de passe doit agir comme\n"
-"barričre ŕ l'entrée.\n"
-"\n"
-"Le mot de passe choisi devrait contenir au moins 8 caractčres\n"
-"alphanumériques. Ne jamais écrire un mot de passe, forcez-vous ŕ vous en\n"
-"souvenir par coeur. Il faut donc ménager accessibilité et mémoire, donc un\n"
-"mot de passe de 30 caractčres est presque impossible ŕ mémoriser.\n"
-"\n"
-"Afin d'éviter les regards indiscrets, le mot de passe n'apparaîtra pas ŕ\n"
-"l'écran. Il vous faudra donc l'inscrire deux fois afin d'éviter les erreurs\n"
-"de frappe. Évidemment, si vous faites deux fois la męme erreur, celle-ci\n"
-"sera sauvegardée et vous devrez la reproduire afin d'accéder ŕ votre\n"
-"systčme pour la premičre fois.\n"
-"\n"
-"En mode expert, on vous demandera si vous comptez vous connecter sur un\n"
-"serveur d'authentification, tel que NIS ou LDAP. Si votre réseau utilise un\n"
-"de ces protocoles, il faut le sélectionner. Si vous n'en avez aucune idée,\n"
-"demandez ŕ votre administrateur de réseau.\n"
-"\n"
-"Si votre ordinateur n'est pas connecté sur un réseau administré, vous devez\n"
-"choisir Ť Fichiers Locaux ť pour l'authentification."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-"LILO et grub sont deux programmes d'amorce pour GNU/Linux. Cette étape est normalement\n"
-"complčtement automatique. En fait, DrakX analyse le secteur de démarrage\n"
-"(master boot record) et agit en fonction de ce qu'il peut y lire:\n"
-"\n"
-" * Si un secteur de démarrage Windows est détecté, il va ętre remplacer par\n"
-"LILO/GRUB. Donc, vous serez capable de démarrer et tout autre systčme\n"
-"d'exploitation.\n"
-"\n"
-" * si GRUB ou LILO est détecté, il sera remplacé par la nouvelle version;\n"
-"\n"
-"En cas de doute, DrakX affiche différentes options.\n"
-"\n"
-" * Ť Programme d'amorçage ŕ utiliser ť vous propose trois choix:\n"
-"\n"
-" * Ť GRUB ť: si vous préférer GRUB (menu texte).\n"
-"\n"
-" * Ť LILO en mode graphique ť: si vous préférez l'interface graphique.\n"
-"\n"
-" * Ť LILO en mode texte ť: si vous préférez la version texte de LILO.\n"
-"\n"
-" * Ť Périphériques de démarrage ť: dans la plupart des cas, vous n'aurez pas\n"
-"ŕ changer le disque par défaut (Ť /dev/hda ť, mais si vous le désirez, le\n"
-"programme d'amorce peut ętre installé sur un second disque, Ť /dev/hdb ť,\n"
-"ou męme sur une disquette, Ť /dev/fd0 ť.\n"
-"\n"
-" * Ť Délais avant l'activation du choix par défaut ť: au redémarrage de\n"
-"l'ordinateur, il s'agit du temps accordé ŕ l'utilisateur pour démarrer un\n"
-"autre systčme d'exploitation.\n"
-"\n"
-"!! Prenez garde, si vous décidez de ne pas installer de programme d'amorce\n"
-"(en cliquant sur Ť Annuler ť), vous devez vous assurez d'avoir une méthode\n"
-"pour démarrer le systčme. Aussi, assurez vous de bien savoir ce que vous\n"
-"faites si vous modifiez les options. !!\n"
-"\n"
-"En cliquant sur Ť Avancée ť, vous aurez accčs ŕ plusieurs autres options de\n"
-"configuration. Sachez que celles-ci sont réservées aux experts en la\n"
-"matičre.\n"
-"\n"
-"Si vous avez d'autres systčmes d'exploitation installés sur votre\n"
-"ordinateur, ils seront automatiquement détectés et ajout ŕ vos menus de\n"
-"démarrage. Ŕ cette étape, vous pouvez décider de préciser ces options. En\n"
-"double-cliquant sur une entrée existante vous pourrez la paramétrer ŕ votre\n"
-"guise, ou l'enlever. Ť Ajouter ť permet de créer de nouvelles entrées, et\n"
-"Ť terminer ť vous conduit ŕ la prochaine étape d'installation."
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (LInux LOader) et grub sont des programme d'amorcage: ils sont\n"
-"capables de démarrer GNU/Linux ou n'importe quel autre systčme\n"
-"d'exploitation présent sur votre machine. Normalement, ces autres\n"
-"systčmes sont censés ętre correctement détectés et installés. Si ce\n"
-"n'est pas le cas, vous pouvez ajouter manuellement une nouvelle entrée \n"
-"via cet écran. Veillez ŕ choisir les paramčtres corrects.\n"
-"\n"
-"Vous pouvez également supprimer l'accčs ŕ ces autres systčmes en\n"
-"détruisant les entrées correspondantes. Mais vous aurez alors besoin\n"
-"d'une disquette de démarrage afin de lancer ces autres systčmes!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Vous devez maintenant choisir oů placer le programme d'amorçage, LILO ou "
-"Grub,\n"
-"nécessaire au démarrage de GNU/Linux.\n"
-"\n"
-"Ŕ moins de savoir exactement ce que vous faites, choisissez\n"
-"toujours Ť Premier secteur du disque (MBR) ť."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-"Il s'agit ici de choisir un gestionnaire d'impression pour votre "
-"ordinateur.\n"
-"Les autres systčmes peuvent n'en proposer qu'un, Mandrake vous en offre "
-"trois :\n"
-"\n"
-"Ť PDQ ť (Print Don't Queue), vous suffira si votre imprimante est\n"
-"reliée directement ŕ votre ordinateur, et que vous ne voulez pas faire\n"
-"d'impression en réseau. C'est une solution fiable, sűre, et simple pour un\n"
-"débutant ŕ GNU/Linux. PDQ peut quand męme gérer certains cas simples\n"
-"d'imprimantes en réseau. Vous pourrez de toute façon modifier votre choix\n"
-"aprčs installation en lançant PrinterDrake en mode expert.\n"
-"\n"
-"Ť CUPS ť (Common Unix Printing System) est excellent ŕ la fois pour\n"
-"l'impression locale et l'impression réseau. Il est simple d'utilisation et "
-"peut\n"
-"agir aussi bien comme serveur que comme client pour l'ancien systčme\n"
-"d'impression LPD. Il est donc rétro-compatible. Il peut faire beaucoup de\n"
-"choses, mais la configuration minimale est aussi simple que pour PDQ,\n"
-"et il possčde une interface graphique pour l'impression et ses options.\n"
-"Si vous avez besoin d'émuler un serveur LPD, vous devez activer le\n"
-"service Ť cups-lpd ť.\n"
-"\n"
-"Ť LPRng ť (Line Printer New Generation) fait approximativement\n"
-"la męme chose que les deux autres, mais il peut en plus imprimer\n"
-"ŕ travers un réseau Novell Network car il supporte le protocole IPX,\n"
-"et il peut également diriger une impression vers une commande shell.\n"
-"Si vous n'avez pas besoin de ces deux fonctionnalités, CUPS est\n"
-"préférable car plus simple, et plus performant pour les réseaux."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX détecte maintenant tous les périphériques IDE présents sur votre\n"
-"systčme. Également, DrakX recherchera les périphériques SCSI. Finalement,\n"
-"selon les composantes détectées, DrakX installera tous les pilotes\n"
-"nécessaires ŕ son fonctionnement.\n"
-"\n"
-"Compte tenu de la vaste gamme de périphériques disponibles sur le marché,\n"
-"dans certain cas la détection de matériel ne fonctionnera pas. Dans ce cas,\n"
-"DrakX vous demandera de confirmer si des composantes SCSI sont présentes\n"
-"sur votre systčme. Cliquez sur Ť Oui ť si vous ętes certain d'avoir un\n"
-"périphérique SCSI sur votre systčme. DrakX vous présentera alors une liste\n"
-"de carte SCSI disponibles. Sélectionnez la vôtre. Évidement, cliquez sur\n"
-"Ť Non ť, si vous n'en avez pas. Si vous n'ętes pas certain, cliquez sur\n"
-"Ť Voir les informations sur le matériel ť, puis sur Ť OK ť. Vérifiez la\n"
-"liste du matériel, puis cliquez sur Ť OK ť pour retourner ŕ la question\n"
-"concernant les périphériques SCSI.\n"
-"\n"
-"Si vous devez spécifier votre carte SCSI manuellement, DrakX vous demandera\n"
-"de confirmer les options du périphérique. Vous devriez permettre ŕ DrakX de\n"
-"vérifier automatiquement votre carte pour les options nécessaires ŕ\n"
-"déterminer.\n"
-"\n"
-"Il peut arriver que DrakX soit incapable de vérifier les options\n"
-"nécessaires. Dans ce cas, vous devrez les déterminer manuellement.\n"
-"Consultez le guide d'utilisation (Chapitre 3, section \"Obtenir des\n"
-"informations sur votre matériel\") pour quelques astuces pour retrouver les\n"
-"paramčtres nécessaires dans la documentation de vos périphériques, sur le\n"
-"site du fabricant (si vous avez un accčs ŕ Internet) ou ŕ partir des menus\n"
-"de Microsoft Windows (si vous utilisiez ce périphérique avec Windows)."
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Vous pouvez ajouter des entrées supplémentaires dans Ť yaboot ť, soit\n"
-"pour démarrer un autre systčme d'exploitation, soit pour des noyaux de\n"
-"secours.\n"
-"\n"
-"Pour les autres systčmes, l'entrée consiste en un label et la partition "
-"racine.\n"
-"\n"
-"Pour Linux, voici les options possibles :\n"
-"\n"
-"- label : le nom que vous devrez taper au message d'invite de yaboot pour\n"
-"activer cette option d'amorçage. \n"
-"\n"
-"- racine : le périphérique racine ou Ť / ť pour votre installation Linux. \n"
-"\n"
-"- options passées au noyau : sur les matériels Apple, des options sont\n"
-" souvent transmises au noyau pour l'initialisation de la carte graphique,\n"
-"ou pour activer l'émulation (au clavier) des deux boutons qui manquent\n"
-"souvent aux souris d'Apple. Voici quelques exemples : \n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-"- Fichier RamDisk : cette option peut ętre utilisée pour charger des\n"
-"modules avant que le périphérique d'amorçage ne soit disponible, ou\n"
-"pour charger une image ramdisk pour un démarrage de secours.\n"
-"\n"
-"- Taille du RamDisk : la taille par défaut est généralement de 4096 octets.\n"
-"Si vous voulez une taille plus grande, utilisez cette option.\n"
-"- Préactivé en écriture : normalement, la partition racine est initialement\n"
-"montée en mode lecture seulement, pour vérifier le systčme de fichier\n"
-"avant qu'il ne soit activé. Avec cette option, vous pouvez autoriser la\n"
-"partition racine ŕ ętre montée directement en mode écriture.\n"
-"\n"
-"- NoVideo : si la carte graphique devait poser trop de problčmes, vous \n"
-"pouvez activer cette option pour démarrer en mode Ť framebuffer ť natif.\n"
-"\n"
-"- Defaut : sélectionne cette entrée comme choix par défaut, activé en \n"
-"pressant juste <ENTREE> au message d'invite de Ť yaboot ť. C'est cette\n"
-"entrée qui sera alors précédée d'un Ť * ť, si vous pressez <Tab> pour voir\n"
-"la liste des possibilités."
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Ť Yaboot ť est un programme d'amorçage pour les MacIntosh dotés de\n"
-"l'architecture NewWorld (iMac, G3, G4, PowerBook G3 Series 99, iBook, etc.)\n"
-"Il est capable de faire démarrer GNU/Linux, MacOS, ou MacOSX, si\n"
-"ces systčmes sont présents sur votre ordinateur. Normalement, les\n"
-"systčmes d'exploitation déjŕ présents devraient avoir été détectés.\n"
-"Si ce n'est pas le cas, vous pouvez ajouter manuellement l'entrée manquante\n"
-"sur cet écran. Veuillez faire attention de choisir les bons paramčtres.\n"
-"\n"
-"Les principales options de Yaboot sont :\n"
-"\n"
-"- Message de démarrage : un simple texte, affiché avant l'amorçage.\n"
-"\n"
-"- Périphérique d'amorçage : indique oů vous souhaitez installer le\n"
-"programme d'amorçage. Généralement, vous aurez configuré auparavant\n"
-"une partition d'amorçage (bootstrap) pour contenir ces informations.\n"
-"\n"
-"- Délai de l'OpenFirmware : ŕ la différence de LILO, il y a deux\n"
-"délais disponibles avec Yaboot. Pendant le premier (mesuré en secondes),\n"
-"vous pouvez choisir entre CD, OF, MacOS, et Linux.\n"
-"\n"
-"- Délai d'amorçage du noyau : ce délai est similaire ŕ celui de\n"
-"LILO. Aprčs avoir sélectionné Linux, vous aurez ce délai (en dixičmes\n"
-"de seconde) avant d'accepter les paramčtres noyau par défaut.\n"
-"\n"
-"- Autoriser l'amorçage sur CD ? : si vous activez cette option, vous\n"
-"pourrez choisir 'C', pour le CD, ŕ la premičre invite d'amorçage.\n"
-"\n"
-"- Autoriser l'amorçage sur l'OF ? : si vous activez cette option, vous\n"
-"pourrez choisir 'N' pour l'OpenFirmware ŕ la premičre invite d'amorçage.\n"
-"\n"
-"- choix par défaut : vous pouvez sélectionner quel systčme démarrera par\n"
-"défaut aprčs expiration du délai de l'Open Firmware."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/fr/drakx-help.xml
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-"On vous présente ici les différents paramčtres de votre systčme. Selon le\n"
-"matériel installé, certaines entrées seront présentes et d'autres pas.\n"
-"\n"
-" * Ť Souris ť: pour vérifier la configuration actuelle de la souris. "
-"Cliquez\n"
-"sur le bouton pour modifier les options.\n"
-"\n"
-" * Ť Clavier ť: vérifie la configuration choisie pour le clavier. Cliquez\n"
-"sur le bouton pour la modifier.\n"
-"\n"
-" * Ť Fuseau horaire ť: DrakX, par défaut, essaie de trouver le fuseau\n"
-"horaire dans lequel vous ętes. Encore une fois, il est possible que vous ne\n"
-"soyez pas dans le fuseau horaire qui vous convient. Donc, vous aurez\n"
-"peut-ętre ŕ cliquer sur le bouton Ť fuseau horaire ť pour identifier\n"
-"précisément l'heure qui doit apparaître dans vos horloges.\n"
-"\n"
-" * Ť Imprimante ť: en cliquant sur Ť Pas d'imprimante ť, l'outil de\n"
-"configuration sera démarré.\n"
-"\n"
-" * Ť Carte son ť: si une carte son a été détectée, elle apparaîtra ici.\n"
-"Aucune modification n'est possible ŕ cette étape.\n"
-"\n"
-" * Ť Carte TV ť: si une carte d'entrée/sortie vidéo (carte TV) a été\n"
-"détectée, elle apparaîtra ici. Aucune modification possible ŕ cette étape.\n"
-"\n"
-" * Ť Carte ISDN ť: si une carte ISDN est détectée, elle apparaîtra ici. "
-"Vous\n"
-"pouvez cliquer sur le bouton pour en modifier les paramčtres."
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Choisissez le disque dur que vous souhaitez effacer pour installer votre\n"
-"nouvelle partition Mandrake Linux. Soyez prudent, toutes les données\n"
-"présentes sur ce disque seront perdues et ne seront pas récupérables !"
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Cliquez sur Ť OK ť seulement si vous désirez supprimer toutes les données\n"
-"et partitions présentes sur ce disque dur. Soyez prudent. Aprčs avoir "
-"cliqué\n"
-"sur Ť OK ť, vous n'aurez aucun moyen de récupérer ces données et\n"
-"partitions, y compris celles de Windows."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Impossible d'accéder aux modules correspondant ŕ votre noyau (le fichier %s "
-"est manquant), cela veut généralement dire que votre disquette de boot est "
-"désynchronisée par rapport ŕ votre medium d'Installation (veuillez créer une "
-"disquette de boot plus récente)"
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Vous devez aussi formater %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vous avez sélectionné le(s) serveur(s) suivant(s) : %s\n"
-"\n"
-"\n"
-"Ces serveurs seront activés par défaut. Ils n'ont pas de trou\n"
-"de sécurité connu, mais de nouveaux problčmes peuvent ętre\n"
-"découverts par la suite. Dans ce cas, vous devrez vous assurer\n"
-"de mettre ŕ jour vos serveurs le plus rapidement possible.\n"
-"\n"
-"\n"
-"Confirmez vous l'installation de ces serveurs ?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "On ne peut pas utiliser l'option broadcast sans domaine NIS"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insérez une disquette formatée en FAT (format DOS/Windows) %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Cette disquette n'est pas au format DOS/Windows"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Pour utiliser cette sauvegarde de sélection des paquetages, veuillez "
-"redémarrer l'installation avec la commande Ť linux defcfg=floppy ť."
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erreur lors de la lecture du fichier %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Certains périphériques présents sur votre systčme nécessitent des pilotes\n"
-"Ť propriétaires ť pour pouvoir fonctionner. Vous pouvez trouver plus\n"
-"d'informations les concernant ici : %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vous devez avoir une partition racine.\n"
-"Pour la définir, créez une partition (ou choisissez-en une déjŕ\n"
-"existante) puis cliquez sur Ť Point de montage ť et choisissez Ť / ť."
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Vous devez créer une partition d'échange (swap)"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vous n'avez pas de partition d'échange (swap).\n"
-"\n"
-"Désirez-vous tout de męme continuer ?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vous devez disposer d'une partition FAT montée en /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Utiliser l'espace libre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Pas assez d'espace libre pour créer de nouvelles partitions"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Utiliser une partition existante"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Pas de partition existante ŕ utiliser"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Utiliser la partition Windows pour le loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quelle partition désirez-vous utiliser pour Linux4Win ?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Choix des tailles"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Taille de la partition racine en Mo : "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Taille de la partition d'échange (swap) en Mo : "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Utiliser l'espace libre sur la partition de Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Quelle partition désirez-vous redimensionner ?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calcul des limites du systčme de fichiers de Windows en cours"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Le programme de redimensionnement des partitions FAT ne peut gérer votre\n"
-"partition. L'erreur suivante est survenue : %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Votre partition FAT est trop fragmentée. Redémarrez sous Windows\n"
-"et lancez le programme de défragmentation Ť defrag ť,\n"
-"puis relancez l'installation de Mandrake Linux."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATTENTION !\n"
-"\n"
-"La taille de votre partition Windows va maintenant ętre réduite.\n"
-"\n"
-"Soyez prudent : cette opération est dangereuse. Si ce n'est pas déjŕ\n"
-"fait, vous devriez tout d'abord sauvegarder vos données et lancer les\n"
-"programmes Ť scandisk ť et Ť defrag ť (fournis avec Windows)\n"
-"sur cette partition.\n"
-"\n"
-"Si vous ętes sűr de vous, cliquez sur OK."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Quelle taille désirez-vous allouer ŕ Windows ?"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Le redimensionnement de la partition FAT a échoué: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Il n'y a aucune partition FAT ŕ redimensionner ou ŕ utiliser en tant que "
-"loopback (ou trop peu d'espace est disponible)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Effacer tout le disque"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Supprimer Microsoft Windows"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Vous possédez plus d'un disque dur.\n"
-"Sur lequel désirez vous installer Linux ?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"TOUTES les partitions et les données présentes sur le disque %s seront "
-"perdues"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Partitionnement personnalisé"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Utiliser fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Vous pouvez maintenant partitionner %s.\n"
-"\n"
-"Lorsque vous aurez terminé, n'oubliez pas d'enregistrer vos\n"
-"modifications en appuyant sur la touche Ť w ť."
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Utiliser l'espace libre sur la partition de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Pas de place disponible pour l'installation"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'assistant de partitionnement de DrakX\n"
-"a trouvé les solutions suivantes :"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Le partitionnement a échoué : %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Démarrage de l'interface réseau"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Arręt de l'interface réseau"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Une erreur est survenue et semble difficile ŕ résoudre correctement.\n"
-"Vous pouvez continuer, mais ŕ vos risques et périls."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Point de montage en double : %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Quelques paquetages importants n'ont pas été correctement installés. Il se\n"
-"peut que le lecteur de cédérom ou le cédérom lui-męme soit défectueux. Vous\n"
-"pouvez vous assurer du bon état de ce dernier en exécutant la commande "
-"suivante\n"
-"sur un ordinateur fonctionnant correctement : Ť rmp -qpl Mandrake/RPMS/*."
-"rpm ť\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bienvenue sur %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Aucun lecteur de disquette disponible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Démarrage de l'étape Ť %s ť\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Votre ordinateur possčde peu de mémoire. Vous aurez peut-ętre quelques\n"
-"problčmes pour installer Mandrake Linux. Si cela se produit, vous pouvez\n"
-"essayer de procéder ŕ une installation en mode texte. Pour cela, appuyez\n"
-"sur la touche Ť F1 ť aprčs l'amorçage sur cédérom puis entrez Ť text ť."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Classe d'installation"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Veuillez choisir une des classes d'installation ci-dessous :"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-"La taille totale pour les groupes sélectionnés est approximativement de %d "
-"Mo.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Si vous voulez réduire la taille de votre installation,\n"
-"choisissez le pourcentage de paquetages que vous souhaitez installer.\n"
-"\n"
-"Un faible pourcentage ne conservera que les paquetages les plus importants.\n"
-"Un pourcentage de 100%% installera tous les paquetages sélectionnés."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Vous n'avez d'espace sur votre disque que pour %d%% de ces paquetages.\n"
-"\n"
-"Si vous souhaitez réduire encore la taille de l'installation,\n"
-"choisissez un pourcentage encore plus faible.\n"
-"\n"
-"Un faible pourcentage ne conserve que les paquetages les plus importants.\n"
-"Un pourcentage de %d%% installera le maximum possible de packages."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-"Vous pourrez affiner la sélection des paquetages lors de la prochaine étape."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Pourcentage de paquetages ŕ installer"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Sélection des groupes de paquetages"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Sélection individuelle des paquetages"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Taille totale : %d / %d Mo"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Mauvais paquetage"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nom : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Version : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Taille : %d Ko\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importance : %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Il n'y a pas assez de place pour installer ce paquetage"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Les paquetages suivants vont ętre installés"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Les paquetages suivants vont ętre désinstallés"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Vous ne pouvez pas sélectionner/désélectionner ce paquetage"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Ce paquetage est nécessaire, vous ne pouvez pas l'enlever."
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Vous ne pouvez pas désélectionner ce paquetage. Il est déjŕ installé."
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ce paquetage doit ętre mis ŕ jour.\n"
-"Ętes-vous certain de vouloir le désélectionner ?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-"Vous ne pouvez pas désélectionner ce paquetage, il doit ętre mis ŕ jour."
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Montrer les paquetages sélectionnés automatiquement"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Installation"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Charger/Sauver sur disquette"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Mise-ŕ-jour de la sélection des paquetages"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Installation minimale"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Choisissez les paquetages que vous voulez installer"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Installation"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimation en cours"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Temps restant "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Veuillez patienter, préparation de l'installation..."
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetages"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation du paquetage %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Accepter"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Refuser"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"--Changement de cédérom--\n"
-"\n"
-"Veuillez insérer le cédérom nommé Ť %s ť,\n"
-"puis cliquez sur Ť OK ť.\n"
-"\n"
-"Si vous ne le possédez pas, cliquez sur Ť Annuler ť."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Souhaitez-vous tout de męme continuer ?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Erreur lors du tri des paquetages :"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Erreur lors de l'installation du paquetage :"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Important\n"
-"\n"
-"Veuillez lire attentivement le présent document. En cas de désaccord \n"
-"avec l'un de ses termes vous n'ętes pas autorisé ŕ installer les cédéroms\n"
-"suivants. Dans ce cas, Cliquez sur Ť Refuser ť pour continuer \n"
-"l'installation sans ces médias.\n"
-"\n"
-"Certains composants logiciels contenus dans les prochains cédéroms \n"
-"ne sont pas soumis aux licences GPL ou similaires permettant la copie, \n"
-"la modification ou la redistribution. Chacun de ces composants logiciels \n"
-"est distribué sous les termes et conditions d'un accord de licence qui \n"
-"lui est propre. Veuillez vous y référer et vous y soumettre avant de les \n"
-"installer ou de les redistribuer. Généralement, ces licences n'autorisent\n"
-"pas la copie (autre qu'ŕ titre de sauvegarde), la redistribution, \n"
-"la décompilation, la désassemblage, l'ingénierie inverse ni la modification "
-"des\n"
-"Logiciels auxquels elles s'appliquent. Toute violation d'un des termes de la "
-"licence applicable entraîne généralement sa\n"
-"résiliation, sans préjudice de tous autres droits ou actions ŕ votre "
-"encontre.\n"
-"Ŕ moins que l'accord de licence ne vous l'y autorise, vous ne pouvez pas \n"
-"installer ces Logiciels sur plus d'une machine ni adapter les Logiciels \n"
-"pour une utilisation en réseau. Le cas échéant, veuillez contacter le \n"
-"distributeur du programme pour acquérir des licences additionnelles.\n"
-"La distribution ŕ des tiers de copies des Logiciels ou de la documentation\n"
-"qui les accompagne est généralement interdite.\n"
-"\n"
-"Tous les droits, titres et intéręt de ces Logiciels sont la propriété \n"
-"exclusive de leurs auteurs respectifs et sont protégés au titre des \n"
-"droits de propriété intellectuelle et de copyright applicables aux "
-"logiciels.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Une erreur est survenue"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Désirez-vous vraiment quitter l'installation?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licence"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Introduction\n"
-"\n"
-"Le systčme d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux sont ci-aprčs dénommés les Ť Logiciels ť.\n"
-"Les Logiciels comprennent notamment, mais de façon non limitative,\n"
-"l'ensemble des programmes, procédés, rčgles et documentations \n"
-"relatifs au systčme d'exploitation et aux divers composants de la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"1. Licence\n"
-"\n"
-"Veuillez lire attentivement le présent document. Ce document constitue \n"
-"un contrat de licence entre vous (personne physique ou personne morale) et \n"
-"MandrakeSoft S.A. portant sur les Logiciels.\n"
-"Le fait d'installer, de reproduire ou d'utiliser les Logiciels de quelque \n"
-"maničre que ce soit indique que vous reconnaissez avoir préalablement eu \n"
-"connaissance et que vous acceptez de vous conformer aux termes et "
-"conditions \n"
-"du présent contrat de licence. En cas de désaccord avec le présent "
-"document \n"
-"vous n'ętes pas autorisé ŕ installer, reproduire et utiliser de quelque \n"
-"maničre que ce soit ce produit.\n"
-"Le contrat de licence sera résilié automatiquement et sans préavis dans le \n"
-"cas oů vous ne vous conformeriez pas aux dispositions du présent document. \n"
-"En cas de résiliation vous devrez immédiatement détruire tout exemplaire "
-"et \n"
-"toute copie de tous programmes et de toutes documentations qui constituent \n"
-"le systčme d'exploitation et les divers composants disponibles dans la \n"
-"distribution Mandrake Linux.\n"
-"\n"
-"\n"
-"2. Garantie et limitations de garantie\n"
-"\n"
-"Les Logiciels et la documentation qui les accompagne sont fournis en "
-"l'état \n"
-"et sans aucune garantie. MandrakeSoft S.A. décline toute responsabilité \n"
-"découlant d'un dommage direct, spécial, indirect ou accessoire, de quelque \n"
-"nature que ce soit, en relation avec l'utilisation des Logiciels, "
-"notamment \n"
-"et de façon non limitative, tout dommage entraîné par les pertes de \n"
-"bénéfices, interruptions d'activité, pertes d'informations commerciales ou \n"
-"autres pertes pécuniaires, ainsi que des éventuelles condamnations et \n"
-"indemnités devant ętre versées par suite d'une décision de justice, et ce \n"
-"męme si MandrakeSoft S.A. a été informée de la survenue ou de \n"
-"l'éventualité de tels dommages.\n"
-"\n"
-"AVERTISSEMENT QUANT Ŕ LA DÉTENTION OU L'UTILISATION DE LOGICIELS \n"
-"PROHIBÉS DANS CERTAINS PAYS \n"
-"\n"
-"En aucun cas, ni MandrakeSoft S.A. ni ses fournisseurs ne pourront ętre \n"
-"tenus responsable ŕ raison d'un préjudice spécial, direct, indirect ou \n"
-"accessoire, de quelque nature que ce soit (notamment et de façon non \n"
-"limitative les pertes de bénéfices, interruptions d'activité, pertes \n"
-"d'informations commerciales ou autres pertes pécuniaires, ainsi que \n"
-"des éventuelles condamnations et indemnités devant ętre versées par suite \n"
-"d'une décision de justice) qui ferait suite ŕ l'utilisation, la détention \n"
-"ou au simple téléchargement depuis l'un des sites de téléchargement de \n"
-"Mandrake Linux de logiciels prohibés par la législation ŕ laquelle vous \n"
-"ętes soumis. Cet avertissement concerne notamment certains logiciels de \n"
-"cryptographie fournis avec les Logiciels.\n"
-"\n"
-"\n"
-"3. Licence GPL et autres licences\n"
-"\n"
-"Les Logiciels sont constitués de modules logiciels créés par diverses \n"
-"personnes (physiques ou morales). Nombre d'entre eux sont distribués sous \n"
-"les termes de la Licence Publique Générale GNU (ci-aprčs dénommée Ť GPL ť)\n"
-"ou d'autres licences similaires. La plupart de ces licences vous "
-"permettent \n"
-"de copier, d'adapter ou de redistribuer les modules logiciels qu'elles \n"
-"régissent. Veuillez lire et agréer les termes et conditions des licences \n"
-"accompagnant chacun d'entre eux avant de les utiliser. Toute question \n"
-"concernant la licence d'un Logiciel est ŕ soumettre ŕ l'auteur (ou ŕ ses\n"
-"représentants) du Logiciel et non ŕ MandrakeSoft. \n"
-"Les programmes conçus par MandrakeSoft sont régis par la licence GPL. \n"
-"La documentation rédigée par MandrakeSoft fait l'objet d'une licence \n"
-"spécifique. Veuillez vous référez ŕ la documentation pour obtenir plus \n"
-"de précisions.\n"
-"\n"
-"\n"
-"4. Propriété intellectuelle\n"
-"\n"
-"Tous les droits, titres et intéręts des différents Logiciels sont la \n"
-"propriété exclusive de leurs auteurs respectifs et sont protégés au titre \n"
-"des droits de propriété intellectuelle et de copyright applicables aux "
-"Logiciels.\n"
-"Les marques \"Mandrake\" et \"Mandrake Linux\" ainsi que les \n"
-"logotypes associés sont déposés par MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Dispositions diverses\n"
-"\n"
-"Si une disposition de ce contrat de licence devait ętre déclarée nulle, \n"
-"illégale ou inapplicable par un tribunal compétent, cette disposition sera \n"
-"exclue du présent contrat. Vous continuerez ŕ ętre liés aux autres \n"
-"dispositions, qui recevront leurs pleins effets. Le contrat de licence \n"
-"est soumis ŕ la Loi française. Toute contestation relative aux présentes \n"
-"dispositions sera réglée préalablement par voie amiable. A défaut d'accord\n"
-"avec MandrakeSoft S.A., les tribunaux compétents de Paris seront saisis du \n"
-"litige. Pour toute question relative au présent document, veuillez \n"
-"contacter MandrakeSoft S.A.\n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Clavier"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Veuillez choisir votre type de clavier."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Voici la liste complčte des claviers disponibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Quelle classe d'installation désirez-vous utiliser ?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Installation/Mise-ŕ-jour"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Désirez-vous faire une installation ou une mise-ŕ-jour ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recommandée"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Expert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Mise-ŕ-jour"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Mise-ŕ-jour seulement des paquetages"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Veuillez choisir le type de votre souris."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port souris"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Veuillez choisir le port série sur lequel votre souris est connectée."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Émulation des boutons"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Émulation du bouton 2"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Émulation du bouton 3"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configuration des cartes PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configuration IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "Aucune partition disponible"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Examen des partitions afin d'identifier les points de montage"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Choix des points de montage"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"La table des partitions ne peut ętre lue car elle est trop endommagée.\n"
-"Il est possible de réinitialiser les partitions endommagées (TOUTES LES\n"
-"DONNÉES seront perdues). Une autre solution consiste ŕ ne pas autoriser\n"
-"le logiciel DrakX ŕ modifier la table des partitions (l'erreur est %s)\n"
-"\n"
-"Ętes-vous d'accord pour perdre toutes vos partitions ?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake ne peut pas lire la table des partitions de façon satisfaisante.\n"
-"Vous pouvez continuer, mais ŕ vos risques et périls."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Pas de place libre pour la partition d'amorçage (bootstrap) de 1 Mo."
-"L'installation va\n"
-"continuer, mais pour que votre systčme puisse démarrer, vous aurez besoin "
-"de\n"
-"créer la partition d'amorçage avec DiskDrake."
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr ""
-"Impossible de trouver une partition racine pour procéder ŕ une mise ŕ jour."
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partition racine"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Quelle est la partition racine (/) de votre systčme ?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Vous devez redémarrer pour que les modifications apportées ŕ la\n"
-"table des partitions soient prises en compte"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Sélectionnez les partitions que vous souhaitez formater"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Vérifier la présence de secteurs endommagés ?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatage des partitions"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Création et formatage du fichier %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Le swap est insuffisant pour achever l'installation, veuillez en ajouter."
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Recherche des paquetages disponibles..."
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Recherche des paquetages ŕ mettre ŕ jour..."
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Votre systčme ne dispose pas d'assez d'espace libre pour l'installation ou "
-"la mise-ŕ-jour (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Complčte (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimale (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recommandée (%d Mo)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Vous avez le choix entre :\n"
-"- Sauver sur disquette la sélection des paquetages.\n"
-"- Établir un nouveau choix de sélection ŕ partir d'une sauvegarde sur "
-"disquette.\n"
-"Le format est le męme que celui des disquettes générées pour l'installation "
-"automatisée."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Charger ŕ partir d'une disquette..."
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Chargement depuis la disquette..."
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Sélection des paquetages"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Insérez une disquette contenant une sélection de paquetages."
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Sauvegarder sur disquette..."
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "La taille sélectionnée est plus importante que la place disponible"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Type d'installation"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Vous n'avez sélectionné aucun groupe de paquetages\n"
-"Veuillez choisir l'installation minimale voulue."
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Avec X"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Avec la documentation de base (recommandé !)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Installation vraiment minimale (et en particulier pas d'urpmi)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si vous possédez tous les cédéroms ci-dessous, cliquez sur Ť OK ť.\n"
-"Si vous n'en possédez aucun, cliquez sur Ť Annuler ť.\n"
-"Sinon désélectionnez ceux que vous n'avez pas, puis cliquez sur Ť OK ť."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "cédérom Ť %s ť"
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Préparation de l'installation"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installation du paquetage %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuration post-installation"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insérez la disquette d'amorçage utilisée dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insérez la disquette de mise-ŕ-jour de modules dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Vous avez maintenant la possibilité de télécharger des paquetages contenant "
-"des logiciels faisant usage de cryptographie si votre connexion internet est "
-"correctement configurée.\n"
-"\n"
-"\n"
-"ATTENTION : EN RAISON DE LA DIVERSITÉ DES RÉGLEMENTATIONS CONCERNANT CES "
-"LOGICIELS, VOUS DEVEZ VOUS ASSURER QUE LES LOIS ET RČGLEMENTS AUXQUELS VOUS "
-"ĘTES SOUMIS VOUS AUTORISENT Ŕ LES TÉLÉCHARGER, LES STOCKER ET/OU LES "
-"UTILISER.\n"
-"\n"
-"\n"
-"NOUS ATTIRONS TOUT PARTICULIČREMENT VOTRE ATTENTION SUR LE RESPECT DE LA "
-"RÉGLEMENTATION EN VIGUEUR DANS VOTRE PAYS. VOUS VOUS EXPOSEZ Ŕ DE GRAVES "
-"SANCTIONS EN CAS DE VIOLATION DESDITES RČGLES.\n"
-"\n"
-"\n"
-"EN AUCUN CAS, NI MANDRAKESOFT NI SES FOURNISSEURS NE POURRONT ĘTRE TENUS "
-"RESPONSABLES Ŕ RAISON D'UN PRÉJUDICE SPÉCIAL, INDIRECT OU ACCESSOIRE, DE "
-"QUELQUE NATURE QUE CE SOIT (NOTAMMENT LES PERTES DE BÉNÉFICES, INTERRUPTIONS "
-"D'ACTIVITÉ, PERTES D'INFORMATIONS COMMERCIALES OU AUTRES PERTES PÉCUNIAIRES, "
-"AINSI QUE DES ÉVENTUELLES CONDAMNATIONS ET INDEMNITÉS DEVANT ĘTRE VERSÉES "
-"PAR SUITE D'UNE DÉCISION DE JUSTICE) QUI FERAIT SUITE Ŕ L'UTILISATION, LA "
-"DÉTENTION OU AU SIMPLE TÉLÉCHARGEMENT DES LOGICIELS DE CRYPTOGRAPHIE "
-"AUXQUELS VOUS POURREZ ÉVENTUELLEMENT ACCÉDER APRČS AVOIR VALIDÉ LE PRÉSENT "
-"ACCORD.\n"
-"\n"
-"\n"
-"Si vous résidez en France, le présent accord est soumis ŕ loi française. Si "
-"vous résidez hors de France, le droit local pourra, le cas échéant, "
-"s'appliquer.\n"
-"\n"
-"\n"
-"Au cas oů vous auriez des questions concernant cet accord, veuillez vous "
-"mettre en relation avec :\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Vous avez maintenant la possibilité de télécharger les mises ŕ jour\n"
-"créées depuis la sortie de cette version de Mandrake Linux.\n"
-"\n"
-"Il s'agit de correctifs de sécurité, ou de correction de bogues,\n"
-"et vous aurez besoin d'une connexion internet pour les obtenir.\n"
-"\n"
-"Voulez-vous installer les mises-ŕ-jour ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Connexion au site web de Mandrake Linux pour obtenir la liste des serveurs "
-"miroirs disponibles..."
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Choisissez un serveur miroir d'oů télécharger les paquetages"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Téléchargement de la liste des paquetages disponibles..."
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Quelle est votre fuseau horaire ?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Horloge systčme réglée sur le Temps Universel (GMT)"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Synchronisation automatique de l'horloge (via NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Serveur NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Serveur CUPS distant"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Pas d'imprimante"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Possédez-vous une carte son ISA ?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "Lancez Ť sndconfig ť aprčs l'installation pour configurer la carte son"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Aucune carte son detectée. Essayez avec Ť harddrake ť aprčs l'installation"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Résumé"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Souris"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Fuseau horaire"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Imprimante"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Carte RNIS/ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Carte son"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Carte TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Fichiers locaux"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Mot de passe root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Pas de mot de passe"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr "Ce mot de passe est trop court (minimum %d caractčres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Authentification"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Authentification LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "Racine (dn) LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Serveur LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Authentification NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Domaine NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Serveur NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Une disquette d'amorçage permet de lancer votre systčme Linux\n"
-"sans utiliser le programme d'amorçage du disque dur.\n"
-"\n"
-"C'est utile si vous ne voulez pas installer SILO sur votre systčme,\n"
-"si un autre systčme d'exploitation supprime le programme d'amorçage, ou "
-"encore\n"
-"si ce dernier ne peut ętre installé sur votre machine.\n"
-"\n"
-"Vous pouvez également utiliser cette disquette avec l'image de secours "
-"Mandrake.\n"
-"Cela permet une récupération plus aisée du systčme en cas de problčmes "
-"majeurs.\n"
-"\n"
-"Si vous voulez créer une disquette d'amorçage pour votre systčme, insérez \n"
-"une disquette dans le premier lecteur et appuyer sur \"Ok\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Premier lecteur de disquette"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Second lecteur de disquette"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Abandonner"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Une disquette d'amorçage permet de lancer votre systčme Linux\n"
-"sans utiliser le programme d'amorçage du disque dur.\n"
-"\n"
-"C'est utile si vous ne voulez pas installer LILO sur votre systčme,\n"
-"si un autre systčme d'exploitation supprime le programme d'amorçage, ou "
-"encore\n"
-"si ce dernier ne peut ętre installé sur votre machine.\n"
-"\n"
-"Vous pouvez également utiliser cette disquette avec l'image de secours "
-"Mandrake.\n"
-"Cela permet une récupération plus aisée du systčme en cas de problčmes "
-"majeurs.\n"
-"\n"
-"Désirez-vous créer une disquette d'amorçage pour votre systčme ?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-"\n"
-"\n"
-"(ATTENTION ! Vous utilisez XFS pour votre partition racine,\n"
-"créer une disquette de boot 1.44 Mb va probablement échouer,\n"
-"parce que XFS a besoin d'un pilote trčs gros)."
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Désolé, aucun lecteur de disquette ne semble disponible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr ""
-"Choisissez le lecteur de disquette ŕ utiliser pour\n"
-"créer votre disquette d'amorçage."
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insérez une disquette dans le %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Création de la disquette d'amorçage..."
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Préparation du programme d'amorçage..."
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Il semble que votre machine ne soit pas dotée de l'architecture Ť NewWorld "
-"ť.\n"
-"Le programme d'amorçage Ť yaboot ť ne fonctionnera pas.\n"
-"L'installation va continuer, mais vous aurez besoin de Ť BootX ť pour "
-"démarrer\n"
-"votre machine."
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Désirez-vous utiliser Ť aboot ť ?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Une erreur est survenue lors de l'installation de Ť aboot ť.\n"
-"Désirez-vous forcer l'installation au risque de détruire la\n"
-"premičre partition du disque ?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Installation du programme d'amorçage..."
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"L'installation du programme d'amorçage a échoué pour la raison suivante :"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Vous aurez peut-ętre besoin de changer le périphérique d'amorçage\n"
-"de l'OpenFirmware pour activer le programme d'amorçage. Si vous\n"
-"ne voyez pas apparaître l'invite du programme d'amorçage lorsque\n"
-"vous redémarrerez, appuyez sur Command-Option-O-F au démarrage et\n"
-"entrez :\n"
-"setenv boot-device %s,\\\\:tbxi\n"
-"Puis tapez : shut-down\n"
-"Au prochain démarrage vous devriez voir apparaître l'invite du\n"
-"programme d'amorçage."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insérez une disquette vierge dans le lecteur %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Création de la disquette d'auto-installation..."
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Certaines étapes ne sont pas terminées.\n"
-"\n"
-"Voulez-vous vraiment quitter maintenant ?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Félicitations, l'installation est terminée.\n"
-"Enlevez la disquette ou le cédérom d'amorçage et appuyez sur Ť Entrée ť.\n"
-"\n"
-"\n"
-"Pour toutes informations sur les corrections disponibles pour cette version "
-"de Mandrake Linux, consultez les Errata disponibles depuis :\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Des informations sur la configuration de votre systčme sont \n"
-"disponibles dans le Guide de l'Utilisateur de Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Créer une disquette d'auto-installation"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"L'auto-installation peut ętre complčtement automatique si nécessaire,\n"
-"dans ce cas elle prend le contrôle du disque dur !!\n"
-"(prévu pour l'installation d'une autre machine).\n"
-"\n"
-"Vous pouvez préférer rejouer l'installation.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatisée"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Rejouer"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Sauvegarder la sélection des paquetages..."
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Installation de Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-"<Tab> suivant | <Alt-Tab> précédent | <Espace> sélectionner | <F12> Écran "
-"suivant "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "le programme Ť kdesu ť est introuvable"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr "le programme Ť consolehelper ť est introuvable"
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Choisissez un fichier"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avancé"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Basique"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Veuillez patienter"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Information"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Développer l'arborescence"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Réduire l'arborescence"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Basculer entre tri alphabétique et tri par groupes"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Choix erroné. Veuillez recommencer\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Que choisissez-vous ? (%s par défaut) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Champs que vous devrez remplir :\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Votre choix ? (0/1, défaut Ť %s ť)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Bouton Ť %s ť : %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Désirez-vous cliquer sur ce bouton ?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Que choisissez-vous ? (Ť %s ť%s par défaut) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Il y a beaucoup de choses ŕ choisir (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Veuillez choisir le premier nombre du groupe de 10 que vous\n"
-"souhaitez modifier, ou appuyez juste sur <Entrée> pour continuer.\n"
-"Votre choix ? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Notez qu'un message a changé :\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Revalider"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "tchčque (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "allemand"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak standard"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "espagnol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "finlandais"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "français"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "norvégien"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "polonais"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "russe"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "suédois"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "anglais"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "américain (États-Unis)"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "albanais"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "arménien (ancien)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "arménien (machine ŕ écrire)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "arménien (phonétique)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "azerbaďdjanais (latin)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "belge"
-
-#: ../../keyboard.pm_.c:199
-msgid "Bulgarian (phonetic)"
-msgstr "bulgare (phonétique)"
-
-#: ../../keyboard.pm_.c:200
-msgid "Bulgarian (BDS)"
-msgstr "bulgare (BDS)"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "brésilien"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "blélorusse"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "suisse (allemand)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "suisse (français)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "tchčque (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "allemand (sans touches mortes)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "danois"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak américain"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak norvégien"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak suédois"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "estonien"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "géorgien (disposition russe)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "géorgien (disposition latine)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "grec"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "hongrois"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "croate"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "israélien"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "israélien (phonétique)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "iranien"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "islandais"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "italien"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "japonais 106 touches"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "coréen"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "latino-américain"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "lituanien (AZERTY, ancien modčle)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "lituanien (AZERTY, nouveau modčle)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "lituanien Ť ligne de nombres ť QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "lituanien Ť phonétique ť QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "letton"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "macédonien"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "hollandais"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "polonais (QWERTY)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "polonais (QWERTZ)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "portugais"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "canadien (Québec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "roumain (QWERTZ)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "roumain (QWERTY)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "russe (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "slovénien"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "slovaque (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "slovaque (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "serbe (cyrillique)"
-
-#: ../../keyboard.pm_.c:258
-msgid "Tamil"
-msgstr "tamoul"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "thaďlandais"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "tadjik"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "turc (modčle traditionnel Ť F ť)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "turc (modčle moderne Ť Q ť)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "ukrainien"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "américain (international)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "vietnamien Ť colonne numérique ť QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "yougoslave (latin)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr "Touche Alt droite"
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr "Deux touches Shift simultanément"
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr "Touches Control et Shift simultanément"
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr "Touche CapsLock (verrouillage majuscule)"
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Touches Ctrl et Alt simultanément"
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr "Touches Alt et Shift simultanément"
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr "Touche Ť Menu ť"
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr "Touche Ť Windows ť gauche"
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr "Touche Ť Windows ť droite"
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Points de montage circulaires %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Enlevez d'abord les volumes logiques\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"Le support du PCMCIA n'est plus disponible avec les noyaux 2.2. Veuillez "
-"utiliser un noyau 2.4."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Souris SUN"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Souris standard PS2 ŕ molette"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 bouton"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Souris standard ŕ 2 boutons"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Générique"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roulette"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "série"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Souris standard ŕ 3 boutons"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Souris Logitech (série, ancien modčle C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "souris bus"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 boutons"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 boutons"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "aucun"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Pas de souris"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Veuillez tester votre souris"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Pour activer la souris,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "veuillez faire tourner la molette"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Terminer"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Suivant ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Précédent"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Est-ce correct ?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Connexion ŕ l'internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"La façon la plus courante de se connecter ŕ l'internet en utilisant\n"
-"une ligne ADSL est d'utiliser Ť pppoe ť.\n"
-"\n"
-"Certaines connexions utilisent Ť pptp ť, quelques unes se servent de Ť DHCP "
-"ť.\n"
-"\n"
-"Si vous ne savez pas quoi choisir, utilisez pppoe."
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel Speedtouch USB"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "utiliser Ť dhcp ť"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "utiliser Ť pppoe ť"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "utiliser Ť pptp ť"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Quel client DHCP désirez-vous utiliser ?\n"
-"\n"
-"Le client par défaut est Ť dhcpcd ť."
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Aucune carte réseau n'a été détectée sur votre systčme.\n"
-"La connexion ne peut donc pas ętre configurée."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Choisissez la carte réseau"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Veuillez choisir la carte réseau qui sera connectée ŕ l'internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "Aucune carte réseau n'a été identifiée"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configuration du réseau"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Veuillez indiquer le nom d'hôte de votre machine si vous le connaissez.\n"
-"Certains serveurs DHCP ont besoin de ce nom d'hôte pour fonctionner.\n"
-"Celui-ci doit ętre pleinenement qualifié, comme par exemple :\n"
-"mamachine.monlabo.masociete.com"
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nom d'hôte :"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Assistant de configuration réseau"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Modem RNIS/ISDN externe"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Carte RNIS/ISDN interne"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Quel est le type de votre connexion RNIS/ISDN ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Quelle configuration RNIS/ISDN préférez-vous?\n"
-"\n"
-"- L'ancienne configuration contient des outils puissants,\n"
-" mais est difficile ŕ configurer, et n'est pas standard.\n"
-" Elle utilise Ť isdn4net ť\n"
-"- La nouvelle configuration est plus facile ŕ comprendre\n"
-" et plus standard, mais a moins d'outils.\n"
-" Elle utilise Ť isdn-light ť\n"
-"Nous recommandons la seconde (isdn-light)\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "nouvelle configuration (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "ancienne configuration (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuration RNIS/ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Veuillez choisir votre fournisseur d'accčs.\n"
-"S'il ne figure pas dans la liste, choisissez Ť Non listé ť."
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Protocole pour l'Europe"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Protocole pour l'Europe (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protocole pour le reste du monde"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protocole pour le reste du monde \n"
-" Pas de D-Channel (lignes louées)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Quel protocole désirez-vous utiliser ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Quel type de carte possédez-vous ?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Je ne sais pas"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Si vous possédez une carte ISA, les données du prochain écran devraient\n"
-"ętre correctes.\n"
-"\n"
-"Si vous possédez une carte PCMCIA, vous avez besoin de connaître\n"
-"les réglages Ť IRQ ť et Ť IO ť de votre carte.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Arręter"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuer"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Quel est le modčle de votre carte RNIS/ISDN ?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Une carte RNIS/ISDN a été détectée mais son type est inconnu. Veuillez "
-"sélectionner une carte PCI dans le prochain écran."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Aucune carte RNIS/ISDN identifiée. Veuillez en sélectionner une dans le\n"
-"prochain écran."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Veuillez choisir le port série sur lequel votre modem est connecté."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Options d'appel"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nom de la connexion"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Numéro de téléphone"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Identifiant de connexion"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Basée sur un script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Manuelle par terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nom de domaine"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "serveur DNS principal (optionnel)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "serveur DNS secondaire (optionnel)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez vous déconnecter ou reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Vous ętes actuellement connecté ŕ l'internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Vous pouvez vous connecter ŕ l'internet ou reconfigurer votre connexion."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Vous n'ętes actuellement pas connecté ŕ l'internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Connecter"
-
-#: ../../network/netconnect.pm_.c:43
-msgid "Disconnect"
-msgstr "Se déconnecter"
-
-#: ../../network/netconnect.pm_.c:45
-msgid "Configure the connection"
-msgstr "Configurez la connection"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Connexion internet et configuration"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Nous allons configurer la connexion %s."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nous allons maintenant configurer la connexion %s.\n"
-"\n"
-"\n"
-"Cliquez sur OK pour continuer."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuration du réseau"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Comme vous ętes en train de faire une installation réseau,\n"
-" cela veut dire que votre réseau est déjŕ configuré.\n"
-"Cliquez sur <Ok> pour conserver votre configuration,\n"
-"ou sur <Annuler> pour reconfigurer votre connexion internet et réseau.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Bienvenue dans l'assistant de configuration réseau.\n"
-"\n"
-"Nous sommes sur le point de configurer votre connexion internet et réseau.\n"
-"Si vous ne souhaitez pas utiliser la détection automatique, désélectionnez "
-"la case correspondante.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Choisissez le profil ŕ configurer"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Utiliser la détection automatique"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Détection des périphériques..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Connexion par modem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "détecté sur le port %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "Connexion par RNIS/ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "détecté %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "Connexion par ADSL"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "détecté sur l'interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Connexion par Cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "Connexion par Cable détectée"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Connection ŕ travers un réseau local (LAN)"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "carte(s) ethernet détectée(s)"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Choisissez la connexion que vous voulez configurer"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Vous avez configuré plusieurs moyens d'accčs ŕ l'internet.\n"
-"Choisissez celui que vous voulez utiliser.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Connexion internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Désirez-vous activer la connexion lors du démarrage ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuration du réseau"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Le réseau doit ętre redémarré"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Un problčme est survenu pendant le redémarrage du réseau : \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Félicitations, votre choix de configuration internet et réseau est "
-"terminée.\n"
-"La configuration va maintenant ętre appliquée ŕ votre systčme.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Une fois terminé, il est recommandé de redémarrer votre interface graphique, "
-"afin d'éviter les problčmes liés au changement de nom d'hôte de la machine."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-"Des problčmes sont apparus pendant la configuration.\n"
-"Testez votre connexion avec le Ť Centre de Contrôle Mandrake ť (dans la "
-"section Ť réseau ť) ou la commande Ť net_monitor ť. Si votre connexion ne "
-"fonctionne pas, vous pouvez essayer de relancer la configuration."
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ATTENTION : Ce périphérique a déjŕ été configuré pour la connexion "
-"internet.\n"
-"\n"
-"Cliquez simplement sur Ť OK ť pour conserver sa configuration.\n"
-"Sinon la configuration actuelle sera écrasée par les modifications que vous "
-"ferez."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Veuillez indiquer la configuration IP de cette machine.\n"
-"Chaque champ doit ętre complété avec une adresse IP en notation\n"
-"décimale pointée (par exemple, 12.34.56.78)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configuration du périphérique réseau %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (pilote %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Adresse IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Masque de sous-réseau"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(BOOTP/DHCP)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Attribution automatique de l'adresse IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adresse IP doit ressembler ŕ quelque chose comme Ť 192.168.1.20 ť"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Veuillez indiquer un nom d'hôte pour la machine.\n"
-"Celui-ci doit ętre un nom de machine pleinement qualifié, par exemple :\n"
-"mamachine.monlabo.masociete.com\n"
-"Vous pouvez également indiquer l'adresse IP de la passerelle\n"
-"si votre réseau local en possčde une."
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Serveur DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Passerelle (p.ex. %s)"
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Périphérique passerelle"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuration des serveurs mandataires (proxy)"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Serveur mandataire HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Serveur mandataire FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Identifiant de la carte réseau (utile pour les portables)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "La syntaxe doit ętre http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "La syntaxe doit ętre ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuration de l'accčs internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voulez-vous vous connecter ŕ l'internet maintenant ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Test de votre connexion..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Le systčme est ŕ présent connecté ŕ l'internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Pour des raisons de sécurité, il va ętre déconnecté maintenant."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Le systčme ne semble pas connecté ŕ l'internet.\n"
-"Essayez de reconfigurer votre connection."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuration de la connexion"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Veuillez compléter ou vérifier les champs ci-dessous"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "n° IRQ de la carte"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Plage mémoire (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "E/S de la carte"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "E/S_O de la carte"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "E/S_1 de la carte"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Votre numéro de téléphone personnel"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Fournisseur d'accčs (ex.: provider.fr)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Numéro de téléphone pour l'accčs"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "1er DNS du fournisseur (optionnel)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "2čme DNS du fournisseur (optionnel)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Choisissez votre pays"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Numérotation"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Vitesse de connexion"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Temps maxi pour établir la connexion (en sec.)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "nom d'utilisateur du compte"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Mot de passe du compte"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "Le montage a échoué : "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Les partitions étendues ne sont pas supportée par cette plateforme"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Il y a un espace vide dans la table des partitions mais il est\n"
-"inutilisable. La seule solution est de déplacer vos partitions primaires\n"
-"de telle façon que cet espace soit placé contre les partitions étendues."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restauration impossible depuis le fichier %s : %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Mauvais fichier de sauvegarde"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erreur d'écriture dans le fichier %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Votre disque dur semble avoir un problčme matériel :\n"
-"le test pour vérifier son aptitude ŕ conserver l'intégrité des données a "
-"échoué.\n"
-"Cela signifie que serez victime de pertes aléatoires de données."
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "doit avoir"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "important"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "trčs utile"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "utile"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "éventuellement"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nouvelle Génération"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Imprimante locale"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Imprimante distante"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Imprimante sur serveur CUPS distant"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Imprimante sur serveur LPD distant"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Imprimante réseau autonome (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Imprimante sur serveur SMB (Windows 95/98/NT)"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Imprimante sur serveur NetWare"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Indiquer l'adresse du périphérique d'impression"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Impression vers une commande shell"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Modčle inconnu"
-
-#: ../../printer.pm_.c:532
-msgid "Local Printers"
-msgstr "Imprimantes locales"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-msgid "Remote Printers"
-msgstr "Imprimantes distantes"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr " sur port parallčle \\/*%s"
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ", imprimante USB \\/*%s"
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ", périphérique multi-fonctions sur le port parallčle \\/*%s"
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ", périphérique USB multi-fonctions"
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ", périphérique HP JetDirect multi-fonctions"
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ", périphérique multi-fonctions"
-
-#: ../../printer.pm_.c:559
-#, c-format
-msgid ", printing to %s"
-msgstr ", impression sur %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr "sur serveur d'impression LPD Ť %s ť, imprimante Ť %s ť"
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", hôte TCP/IP Ť %s ť, port Ť %s ť"
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr "sur serveur Windows Ť %s ť, partage Ť %s ť"
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr "sur serveur Novell Ť %s ť, imprimante Ť %s ť"
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ", en utilisant la commande %s"
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Imprimante ŕ accčs direct (pas de pilote)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(sur %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(sur cette machine)"
-
-#: ../../printer.pm_.c:868
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Sur serveur CUPS Ť %s ť"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Défaut)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Type de connexion de l'imprimante"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Quel est le type de connexion de l'imprimante ?"
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Si vous utilisez un serveur CUPS distant, vous n'avez pas besoin de "
-"configurer d'imprimante ici. Elles seront automatiquement détectées."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-msgid "CUPS configuration"
-msgstr "Configuration de CUPS"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-msgid "Specify CUPS server"
-msgstr "Specifiez le serveur CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-"Avec les serveurs CUPS distants, vous n'avez pas besoin de configurer "
-"d'imprimante ici ; ceux-ci doivent fournir automatiquement ŕ votre machine "
-"des informations sur les imprimantes disponibles. Toutes les imprimantes "
-"connues de votre ordinateur sont actuellement listées dans le champ "
-"Ť Imprimante par défaut ť. Choisissez l'imprimante par défaut pour votre "
-"machine, puis cliquez sur le bouton Ť Valider / Rafraîchir ť. Ce bouton sert "
-"également ŕ rafraîchir la liste. (il peut se passer jusqu'ŕ 30 secondes "
-"avant que toutes les imprimantes distantes soient visibles). Si le serveur "
-"CUPS est sur un réseau différent, vous devez préciser son adresse IP, et "
-"éventuellement le numéro de port afin d'obtenir les informations sur les "
-"imprimantes. Sinon, laissez ces champs vides."
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-"\n"
-"Normalement, CUPS est configuré automatiquement en fonction de votre "
-"environnement réseau, de façon que vous puissiez accéder aux imprimantes "
-"gérées par les serveurs CUPS de votre réseau local. Si cela ne fonctionne "
-"pas, désactivez Ť configuration automatique de CUPS ť et éditez le fichier "
-"manuellement le fichier /etc/cups/cupsd.conf. N'oubliez pas ensuite de "
-"relancer CUPS (ŕ l'aide de la commande : Ť service cups restart ť ou bien "
-"avec le Ť Centre de Contrôle Mandrake ť dans la section Ť Services ť)."
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "L'adresse IP doit ressembler ŕ quelque chose comme Ť 192.168.1.20 ť"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Le numéro de port doit ętre un nombre entier !"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "Adresse IP du serveur CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Configuration automatique du serveur CUPS"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Détection des périphériques..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Test des ports"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-msgid "Add a new printer"
-msgstr "Ajouter une nouvelle imprimante"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Bienvenue dans l'Assistant de Configuration d'Imprimante\n"
-"\n"
-"Cet assistant permet de configurer des imprimantes locales ou réseau afin "
-"d'ętre utilisée ŕ partir de cette machine ainsi que des autres machines du "
-"réseau.\n"
-"\n"
-"Toutes les informations nécessaires pour configurer l'imprimante vous seront "
-"demandées; vous aurez également accčs ŕ tous les pilotes d'imprimantes "
-"disponibles ainsi qu'ŕ toutes leurs options et ŕ tous les types de "
-"connection."
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-msgid "Local Printer"
-msgstr "Imprimante locale"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-"\n"
-"Bienvenue dans l'Assistant de configuration de l'imprimante.\n"
-"\n"
-"Cet assistant vous aidera ŕ installer les imprimantes connectées\n"
-"ŕ cet ordinateur.\n"
-"\n"
-"Veuillez maintenant brancher vos imprimantes sur l'ordinateur, \n"
-"et allumez-les, puis cliquez sur Ť suivant ť. Si vous ne voulez pas\n"
-" installer d'imprimante maintenant, cliquez sur Ť annuler ť.\n"
-"\n"
-"Notez que certains ordinateurs peuvent planter pendant\n"
-"l'autodétection, donc dans ce cas déselectionnez Ť Détection\n"
-"automatique des imprimantes ť. Utilisez le mode expert de\n"
-"printerdrake si vous voulez installer une imprimante réseau\n"
-"qui n'est pas listée automatiquement."
-
-#: ../../printerdrake.pm_.c:186
-msgid "Auto-detect printers"
-msgstr "Détection automatique des imprimantes"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"Félicitation, votre imprimante est maintenant installée et configurée.\n"
-"\n"
-"Vous pouvez imprimer en utilisant la commande Ť imprimer ť de vos\n"
-"applications (souvent dans le menu Ť fichier ť).\n"
-"\n"
-"Si vous voulez ajouter, enlever ou renommer une imprimante, ou sivous voulez "
-"changer les options par défaut (alimentation papier,qualité d'impression, "
-"etc.), rendez-vous dans la partie Ť imprimante ťde la section Ť matériel ť "
-"du Centre de Contrôle Mandrake."
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Détection automatique des imprimantes"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-"Printerdrake est capable d'auto-détecter les imprimantes parallčle et USB\n"
-"connectées directement ŕ votre ordinateur, mais veuillez noter que sur\n"
-"certains systčmes la détection automatique PEUT BLOQUER VOTRE ORDINATEUR\n"
-"ET DONC PEUT-ĘTRE CORROMPRE VOTRE SYSTČME DE FICHIERS !\n"
-"Faites-le donc Ŕ VOS RISQUES ET PÉRILS !\n"
-"\n"
-"Voulez-vous vraiment auto-détecter vos imprimantes ?"
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-msgid "Do auto-detection"
-msgstr "Lancer la détection automatique"
-
-#: ../../printerdrake.pm_.c:228
-msgid "Set up printer manually"
-msgstr "Configurer l'imprimante manuellement"
-
-#: ../../printerdrake.pm_.c:256
-#, c-format
-msgid "Detected %s"
-msgstr "Détecté %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr "Imprimante sur le port parallčle \\/*%s"
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr "Imprimante USB \\/*%s"
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Aucune imprimante locale n'a pu ętre trouvée!\n"
-"Pour en installer une manuellement entrez un nom de périphérique ou de "
-"fichier sur la ligne d'entrée (Ports parallčles : /dev/lp0, /dev/lp1, ..., "
-"équivalents ŕ LPT1:, LPT2:, ..., premičre imprimante USB : /dev/usb/lp0, "
-"deuxičme imprimante USB : /dev/usb/lp1, ...) "
-
-#: ../../printerdrake.pm_.c:383
-msgid "You must enter a device or file name!"
-msgstr "Vous devez enter un nom de fichier ou de périphérique!"
-
-#: ../../printerdrake.pm_.c:394
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr ""
-"Aucune imprimante locale n'a pu ętre trouvée!\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-"Les imprimantes réseaux ne peuvent ętre configurées qu'aprčs l'installation. "
-"Choississez Ť Matériel ť puis Ť Imprimantes ť dans le Centre de Contrôle de "
-"Mandrake."
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-"Pour installer les imprimantes réseaux, cliquez sur Ť Annuler ť, puis passez "
-"en Ť Mode Expert ť et cliquez ŕ nouveau sur Ť Ajouter une nouvelle "
-"imprimante ť."
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-"L'imprimante suivante a été auto-détectée; si ce n'est pas celle que vous "
-"voulez configurer, tapez un nom de fichier ou de périphérique dans le champs "
-"d'entrée"
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-"Voici une liste de toutes les imprimantes auto-détectées. Veuillez choisir "
-"l'imprimante que vous voulez configurer ou tapez un nom de périphérique ou "
-"de fichier dans le champs d'entrée"
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-"L'imprimante suivante a été auto-détectée. La configuration de cette "
-"imprimante sera effectuée automatiquement. Si votre imprimante n'a pas été "
-"correctement détectée ou si vous préférer effectuer une configuration "
-"personalisée, activez Ť Configuration Manuelle  ť ."
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Voici une liste de toutes les imprimantes auto-détectées. Veuillez choisir "
-"l'imprimante que vous voulez configurer. La configuration de cette "
-"imprimante sera effectuée automatiquement. Si votre imprimante n'a pas été "
-"correctement détectée ou si vous préférer effectuer une configuration "
-"personalisée, activez Ť Configuration Manuelle  ť .\""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Veuillez choisir le port sur laquelle votre imprimante est connectée ou "
-"tapez le nom du périphérique ou de fichier dans le champs d'entrée"
-
-#: ../../printerdrake.pm_.c:414
-msgid "Please choose the port where your printer is connected to."
-msgstr "Veuillez choisir le port sur lequel votre imprimante est connectée."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(Ports parallčles : /dev/lp0, /dev/lp1, ..., équivalents ŕ LPT1:, "
-"LPT2:, ..., premičre imprimante USB : /dev/usb/lp0, deuxičme imprimante "
-"USB : /dev/usb/lp1, ...)."
-
-#: ../../printerdrake.pm_.c:421
-msgid "You must choose/enter a printer/device!"
-msgstr "Vous devez choisir ou entrer une imprimante ou un périphérique !"
-
-#: ../../printerdrake.pm_.c:441
-msgid "Manual configuration"
-msgstr "Configuration manuelle"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-"Votre imprimante est-elle un appareil multifonction de HP (OfficeJet, PSC, "
-"PhotoSmart LaserJet 1100/1200/1220/3200/3300 with scanner) ?"
-
-#: ../../printerdrake.pm_.c:482
-msgid "Installing HPOJ package..."
-msgstr "Installation du paquetage HPOJ..."
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr "Vérification du périphérique et configuration de HPOJ ..."
-
-#: ../../printerdrake.pm_.c:505
-msgid "Installing SANE package..."
-msgstr "Installation du paquetage SANE ..."
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr "Acquisition ŕ partir de votre périphérique multi-fonction HP"
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr "Mise ŕ disposition du port imprimante pour CUPS ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Lecture de la base de données des imprimantes..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Configuration d'une imprimante Unix (lpd) distante"
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Pour utiliser une imprimante Unix distante, vous devez indiquer le nom "
-"d'hôte du serveur LPD et le nom attribué ŕ l'imprimante par ce serveur."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Nom d'hôte du serveur"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nom du serveur distant manquant !"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Le nom de l'imprimante est manquant !"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Configuration d'une imprimante SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Afin de pouvoir accéder ŕ une imprimante connectée ŕ un serveur SMB, vous "
-"devez indiquer le nom SMB du serveur (attention, ce dernier peut ętre "
-"différent de son nom TCP/IP) et, éventuellement, son adresse IP ainsi que le "
-"nom de l'imprimante et toute information applicable quant au nom "
-"d'utilisateur, mot de passe et groupe de travail nécessaires pour accéder ŕ "
-"l'imprimante."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Nom du serveur"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "Adresse IP du serveur"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nom de partage de l'imprimante"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Groupe de travail"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Il faut au moins préciser le nom du serveur ou son adresse IP."
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Il faut préciser le nom de partage de l'imprimante."
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr "ALERTE DE SÉCURITÉ !"
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Options de l'imprimante NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Pour pouvoir utiliser une imprimante connectée ŕ un serveur Netware, vous "
-"devez au moins indiquer le nom Netware du serveur (qui peut ętre différent "
-"du nom d'hôte TCP/IP) et le nom de la file d'impression ŕ laquelle vous "
-"voulez accéder ainsi qu'un nom de login et un mot de passe si nécessaire."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Nom du serveur d'impression"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nom de la file d'impression"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Nom du serveur NCP manquant!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nom de la file d'attente NCP manquant!"
-
-#: ../../printerdrake.pm_.c:852
-msgid "TCP/Socket Printer Options"
-msgstr "Options de l'imprimante réseau (TCP/socket)"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Pour imprimer sur une imprimante TCP ou socket, vous devez indiquer le\n"
-"nom d'hôte de l'imprimante et, optionellement, le numéro du port.\n"
-"Pour les serveurs d'impression Ť HP JetDirect ť, le numéro du\n"
-"port est habituellement 9100, mais cela peut ętre différent pour\n"
-"d'autres serveurs. Veuillez consulter le manuel de votre imprimante."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Nom d'hôte de l'imprimante"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nom d'hôte de l'imprimante manquant !"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Adresse réseau du périphérique d'impression"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Si vous la connaissez, vous pouvez spécifier directement l'adresse réseau "
-"(URL) qui permet d'accéder ŕ l'imprimante. Choisissez un en-tęte puis "
-"complétez l'adresse en respectant les spécifications CUPS ou Foomatic. Notez "
-"que tous les types d'URL ne sont pas supportés par tous les gestionnaires "
-"d'impression."
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Une adresse valide doit ętre entrée !"
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Toute imprimante a besoin d'un nom (par exemple Ť lpr ť) auquel on se réfčre "
-"pour pouvoir imprimer.\n"
-"Les champs Ť Description ť et Ť Emplacement ť n'ont pas besoin d'ętre "
-"remplis. Ce sont de simples commentaires pour les utilisateurs."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Description"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Emplacement"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Préparation de la base de données des imprimantes..."
-
-#: ../../printerdrake.pm_.c:1112
-msgid "Your printer model"
-msgstr "Le modčle de votre imprimante"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Le nom de modčle résultant de l'autodétection a été comparée ŕ la basede "
-"données d'imprimantes pour trouver la meilleure correspondance.Ce choix peut "
-"ętre mauvais, particuličrement si votre modčle d'imprimanten'apparaît pas "
-"dans la base de données. Vérifiez ce choix, puis cliquez surŤ Le modčle est "
-"correct ť, ou le cas échéant sur Ť Sélectionner manuellement le modčle ť.\n"
-"\n"
-"Votre imprimante a été détectée comme étant :\n"
-"\n"
-"%s"
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-msgid "The model is correct"
-msgstr "Le modčle est correct"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-msgid "Select model manually"
-msgstr "Sélectionner manuellement le modčle"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Sélection du modčle de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Quel modčle d'imprimante possédez-vous ?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Veuillez vérifier si l'imprimante a été correctement détectée Cherchez le "
-"modčle correct dans la liste si le curseur se situe sur un modčle erroné ou "
-"sur Ť Imprimante ŕ accčs direct ť."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si votre imprimante n'est pas listée, choisissez-en une compatible (voir le "
-"manuel de l'imprimante) ou similaire."
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "Configuration de l'imprimante OKI winprinter"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Vous ętes en train de configurer une imprimante laser OKI winprinter.\n"
-"Ces imprimantes utilisent un protocole de communication trčs spécial, et "
-"elles ne fonctionnent que si elles sont connectées au premier port "
-"parallčle. Si votre imprimante est connectée ŕ un autre port ou ŕ un serveur "
-"d'impression, veuillez la connecter au premier port parallčle avant "
-"l'impression de la page de test. Sans cela, l'imprimante ne fonctionnera pas "
-"Vos paramčtres de type de connexion seront ignorés par le pilote."
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Configuration de l'imprimante Lexmark inkjet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Les pilotes d'impression inkjet fournis par Lexmark ne permettent que "
-"l'utilisation des imprimantes locales, et pas des imprimantes distantes ou "
-"des serveurs d'impression. Veuillez connecter votre imprimante sur un port "
-"local ou configurez-la sur la machine ŕ laquelle elle est connectée."
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-"Afin de pouvoir imprimer avec votre imprimante Lexmark inkjet et la "
-"configuration actuelle, vous avez besoin des pilotes d'impression inkjet "
-"fournis par Lexmark (http://www.lexmark.com/). Allez sur la section "
-"Ť Drivers ť du site américain de Lexmark, puis choisissez votre modčle et "
-"enfin Ť Linux ť comme systčme d'exploitation. Les pilotes sont des "
-"paquetages RPM ou des scripts shell avec une installation graphique "
-"interactive. Vous n'avez pas besoin de faire cette configuration avec "
-"l'interface graphique. Annulez directement aprčs l'acceptation de la "
-"licence. Ensuite, imprimez les pages pour l'alignement des tętes "
-"d'impression avec Ť lexmarkmaintain ť et ajustez les paramčtres de ces tętes "
-"avec ce programme."
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Paramétrage de l'imprimante par défaut.\n"
-"\n"
-"Assurez-vous que la taille de la page et le type d'encre (si disponible) "
-"sont correctement indiqués. Notez que la vitesse d'impression peut diminuer "
-"si vous augmentez la qualité d'impression."
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'option %s doit ętre un nombre entier !"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'option %s ętre un nombre !"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "L'option %s est en dehors des limites !"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Désirez-vous que l'imprimante Ť %s ť soit l'imprimante\n"
-"par défaut ?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Pages de test"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Merci de sélectionner les pages de test que vous voulez imprimer.\n"
-"Note : la page de test photo peut prendre un temps assez long pour "
-"s'imprimer, et sur les imprimantes laser avec trop peu de mémoire, elle peut "
-"męme ne pas sortir.\n"
-"Dans la plupart des cas, l'impression de la page de test standard suffit."
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Pas de page de test"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Imprimer"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Page de test standard"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Page de test alternative (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Page de test alternative (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Page de test photo"
-
-#: ../../printerdrake.pm_.c:1602
-msgid "Do not print any test page"
-msgstr "Ne pas imprimer de page de test"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Impression des pages de test..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Les pages de test ont été envoyées ŕ l'imprimante.\n"
-"Il peut se passer un certain temps avant le début effectif de l'impression.\n"
-"Statut de l'impression :\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Les pages de test ont été envoyées ŕ l'imprimante.\n"
-"Il peut se passer un certain temps avant le début effectif de l'impression.\n"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr "Ętes-vous satisfait du résultat ?"
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-msgid "Raw printer"
-msgstr "Imprimante ŕ accčs direct"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fenętre de "
-"terminal), vous pouvez soit utiliser la commande Ť %s <fichier> ť ou un "
-"utilitaire d'impression graphique: Ť xpp <fichier> ť ou Ť kprinter "
-"<fichier> ť. Les utilitaires graphiques vous permettent de choisir "
-"l'imprimante et de modifier les paramčtres d'impression facilement.\n"
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Vous pouvez également utiliser ces commandes dans le champ Ť commande "
-"d'impression ť des boîtes de dialogue d'impression dans de nombreuses "
-"applications. Dans ce cas n'indiquez pas le nom du fichier puisqu'il sera "
-"fourni par l'application elle-męme.\n"
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"La commande Ť %s ť permet également de modifier les paramčtres d'impression "
-"pour une impression particuličre. Il suffit pour cela d'ajouter les "
-"paramčtres voulus sur la ligne de commande. Par exemple, Ť %s <fichier> ť. "
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-"Pour obtenir la liste des paramčtres disponibles pour l'imprimante courante, "
-"lisez la liste ci-dessous ou cliquez sur le bouton Ť liste des options "
-"d'impression ť.%s\n"
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Voici la listes des options d'impression disponibles pour l'imprimante "
-"courante:\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fenętre de "
-"terminal), utilisez la commande Ť %s <fichier>ť.\n"
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Cette commande peut également ętre utilisée dans le champ Ť commande "
-"d'impression ť des boîtes de dialogue d'impression dans de nombreuses "
-"applications. Dans ce cas, n'indiquez pas le nom du fichier ŕ imprimer "
-"puisque celui-ci sera fourni par l'application elle-męme.\n"
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Pour obtenir la liste des paramčtres disponibles pour l'imprimante courante, "
-"cliquez sur le bouton Ť liste des options d'impression ť."
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pour imprimer un fichier depuis la ligne de commande (une fenętre de "
-"terminal), utilisez la commande Ť %s <fichier> ť ou Ť %s <fichier> ť.\n"
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Vous pouvez également utiliser l'interface graphique Ť xpdq ť pour "
-"positionner des options d'impression et administrer les travaux "
-"d'impression.\n"
-"Si vous utiliser le bureau KDE, vous disposez d'un Ť bouton panique ť, une "
-"icône sur le bureau, nommé Ť STOP Imprimante ! ť, qui peut suspendre tous "
-"les travaux d'impression. Ceci peut ętre utile en cas de bourrage papier, "
-"par exemple.\n"
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Les commandes Ť %s ť et Ť %s ť permettent également de modifier les "
-"paramčtres d'impression pour une impression particuličre. Il suffit pour "
-"cela d'ajouter les paramčtres voulus sur la ligne de commande, par exemple "
-"Ť %s <fichier> ť.\n"
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Fermer"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Impression/Acquisition sur l'imprimante Ť %s ť"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Impression sur l'imprimante Ť %s ť"
-
-#: ../../printerdrake.pm_.c:1744
-msgid "Print option list"
-msgstr "Liste des options d'impression"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Votre appareil multifonction HP a été configuré automatiquement pour ętre "
-"capable de scanner. Maintenant vous pouvez scanner avec "
-"Ť scanimage ť ( Ť scanimage -d hp:%s ť pour spécifier le scanner si vous en "
-"avez plus d'un) ŕ partir de la ligne de commande, ou avec des interfaces "
-"graphiques comme Ť xscanimage ť ou Ť xsane ť. Si vous utilisez Ť Le Gimp ť, "
-"vous pouvez aussi scanner grace au menu Ť Fichier / Acquisition ť. Pour "
-"avoir plus d'information, vous pouvez taper Ť man scanimage ť ou Ť man sane-"
-"hp ť dans une fenętre de commandes.\n"
-"\n"
-"N'utilisez pas Ť scannerdrake ť pour cet appareil ! "
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-"Votre appareil multifonction HP a été configuré automatiquement pour ętre "
-"capable de scanner. Maintenant vous pouvez scanner avec Ť tal-hp %s scan ... "
-"ť dans une fenętre de commandes. L'acquisition par interface graphique ou "
-"grace ŕ Ť Gimp ť n'est pas encore suportée avec cet appareil. Vous trouverez "
-"plus d'informations dans le fichier /usr/share/doc/hpoj-0.8/ptal-hp-scan."
-"html sur votre systčme. Si vous avez une HP LaserJet 1100 ou 1200, vous "
-"pouvez seulement scanner si vous avez l'option Ť scanner ť installée.\n"
-"\n"
-"N'utilisez pas Ť scannerdrake ť pour cet appareil ! "
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr "Lecture des données de l'imprimante..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-msgid "Transfer printer configuration"
-msgstr "Transfert de la configuration de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Vous pouvez copier la configuration de l'imprimante faite pour le "
-"gestionnaire %s vers votre gestionnaire actuel %s. Toutes les données de "
-"configuration (nom de l'imprimante, description, emplacement, type de "
-"connexion, et paramčtres par défaut) sont récupérées, mais les travaux ne "
-"seront pas transférés.\n"
-"Toutes les files d'attente n'ont pas pu ętre transférées ŕ cause des raisons "
-"suivantes :\n"
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne supporte pas les imprimantes sur les serveurs Novell ni les "
-"impressions vers des commandes shell.\n"
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ne supporte que les imprimantes locales, les imprimantes LPD distantes, "
-"et les imprimantes réseau autonomes.\n"
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD et LPRng ne supportent pas les imprimantes IPP.\n"
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"De plus, les files d'attente qui n'ont pas été créées avec ce programme ou "
-"avec Ťfoomatic-configureť ne peuvent pas ętre transférées."
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Aussi, les imprimantes configurées avec les fichiers PPD fournis par leur "
-"fabriquant ou avec des pilotes CUPS natifs ne peuvent pas ętre transférées."
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Cochez les imprimantes que vous voulez transférer, et\n"
-"cliquez sur Ť Transfert ť."
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr "Ne pas transférer les imprimantes"
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr "Transfert"
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Une imprimante nommée Ť %s ť existe déjŕ sous %s.\n"
-"Cliquez sur Ť Transfert ť pour la remplacer.\n"
-"Vous pouvez également taper un nouveau nom ou\n"
-"simplement ignorer cette imprimante."
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Le nom de l'imprimante ne devrait contenir que des lettres, des nombres et "
-"des tirets bas (_)"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"L'imprimante Ť %s ť existe déjŕ,\n"
-"voulez-vous vraiment écraser sa configuration ?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Nouveau nom de l'imprimante"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr "Transfert de %s..."
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Vous avez transféré votre précédente imprimante par défaut (Ť %s ť). Doit-"
-"elle ętre également l'imprimante par défaut de votre nouveau systčme "
-"d'impression %s ?"
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr "Mise ŕ jour des données de l'imprimante..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-msgid "Configuration of a remote printer"
-msgstr "Configuration d'une imprimante distante"
-
-#: ../../printerdrake.pm_.c:1896
-msgid "Starting network ..."
-msgstr "Démarrage du réseau..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-msgid "Configure the network now"
-msgstr "Configurez le réseau maintenant"
-
-#: ../../printerdrake.pm_.c:1931
-msgid "Network functionality not configured"
-msgstr "Les fonctionnalités du réseau ne sont pas configurées"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Vous ętes sur le point de configurer une imprimante distante. Cela nécessite "
-"un accčs au réseau, mais votre réseau n'est pas encore configuré. Si vous "
-"voulez continuer sans configurer le réseau, vous ne pourez pas utiliser "
-"l'imprimante que vous ętes en train de configurer. Que voulez-vous faire ?"
-
-#: ../../printerdrake.pm_.c:1935
-msgid "Go on without configuring the network"
-msgstr "Continuer sans configurer le réseau"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-"L'interface réseau qui a été configurée pendant l'installation ne peut pas "
-"ętre démarrée maintenant. Veuillez vérifier si votre réseau est activé aprčs "
-"démarrage. Démarrez le Ť Centre de Contrôle Mandrake ť, vérifiez la "
-"configuration dans la section Ť réseau et internet / connexion ť. Puis "
-"essayez ŕ nouveau de configurer l'imprimante dans la section Ť Matériel / "
-"Imprimante ť."
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"L'accčs réseau n'a pas pu ętre démarré. Veuillez vérifier la configuration "
-"de votre matériel et de votre accčs réseau grâce au Ť Centre de Contrôle "
-"Mandrake ť puis essayez ŕ nouveau de configurer l'imprimante distante."
-
-#: ../../printerdrake.pm_.c:1979
-msgid "Restarting printing system ..."
-msgstr "Redémarrage du systčme d'impression..."
-
-#: ../../printerdrake.pm_.c:2017
-msgid "high"
-msgstr "élevé"
-
-#: ../../printerdrake.pm_.c:2017
-msgid "paranoid"
-msgstr "paranoďaque"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installation du systčme d'impression sous le niveau de sécurité Ť %s ť"
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Vous ętes sur le point d'installer le systčme d'impression %s sur un systčme "
-"dont le niveau de sécurité est réglé sur Ť %s ť.\n"
-"\n"
-"Ce systčme d'impression écoute en permanence le réseau afin de répondre aux "
-"requętes d'impression. Ceci se fait grâce ŕ un processus (daemon) qui tourne "
-"en tâche de fond et qui est accessible par les autres machines du réseau. "
-"C'est donc une cible possible pour des attaques réseau éventuelles. C'est "
-"pourquoi le minimum possible de Ť daemons ť doivent ętre démarrés dans ce "
-"niveau de sécurité.\n"
-"\n"
-"Voulez-vous réellement installer un systčme d'impression ?"
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr "Activation du systčme d'impression au démarrage"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Le systčme d'impression (%s) ne sera pas activé automatiquement lors du "
-"démarrage de la machine.\n"
-"\n"
-"Il est possible que l'activation automatique ait été supprimée par "
-"l'utilisation d'un plus grand niveau de sécurité, car les systčmes "
-"d'impression sont des cibles potentielles d'attaque.\n"
-"\n"
-"Voulez-vous rétablir l'activation automatique du systčme d'impression ?"
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr "Vérification du logiciel installé..."
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr "Suppression de LPRng..."
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr "Suppression de LPD..."
-
-#: ../../printerdrake.pm_.c:2205
-msgid "Select Printer Spooler"
-msgstr "Choisissez le gestionnaire d'impression"
-
-#: ../../printerdrake.pm_.c:2206
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quel systčme d'impression désirez-vous utiliser ?"
-
-#: ../../printerdrake.pm_.c:2239
-#, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configuration de l'imprimante Ť %s ť..."
-
-#: ../../printerdrake.pm_.c:2252
-msgid "Installing Foomatic ..."
-msgstr "Installation de Foomatic ..."
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Options de l'imprimante"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr "Préparation de PrinterDrake..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-msgid "Configuring applications..."
-msgstr "Configuration des applications...."
-
-#: ../../printerdrake.pm_.c:2355
-msgid "Would you like to configure printing?"
-msgstr "Désirez-vous configurer l'impression ?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr "Systčme d'impression : "
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Les imprimantes suivantes sont configurées. Double-cliquez sur l'une d'entre "
-"elles pour modifier ses paramčtres, en faire l'imprimante par défaut, "
-"consulter les informations ŕ son propos ou pour rendre une imprimante d'un "
-"serveur CUPS distant utilisable par Star Office/OpenOffice.org."
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Les imprimantes suivantes sont configurées. Cliquez sur l'une d'entre elles "
-"pour modifier ses paramčtres, en faire l'imprimante par défaut ou consulter "
-"les informations ŕ son propos."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Rafraîchir la liste des imprimantes (pour afficher toutes les imprimantes "
-"CUPS distantes)"
-
-#: ../../printerdrake.pm_.c:2464
-msgid "Change the printing system"
-msgstr "Changer le systčme d'impression"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Mode normal"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-msgid "Do you want to configure another printer?"
-msgstr "Désirez-vous configurer une autre imprimante ?"
-
-#: ../../printerdrake.pm_.c:2711
-msgid "Modify printer configuration"
-msgstr "Modifier la configuration de l'imprimante"
-
-#: ../../printerdrake.pm_.c:2713
-#, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Imprimante %s\n"
-"Que souhaitez-vous modifier sur cette imprimante ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr "Faire"
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-msgid "Printer connection type"
-msgstr "Type de connexion"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr "Nom, description, emplacement"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr "Marque, modčle, pilote"
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr "Marque, modčle"
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr "Choisir comme imprimante par défaut"
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr "Ajouter cette imprimante ŕ StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr "Retirer cette imprimante de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-msgid "Print test pages"
-msgstr "Imprimer des pages de test"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-msgid "Know how to use this printer"
-msgstr "Savoir comment utiliser cette imprimante"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-msgid "Remove printer"
-msgstr "Désinstaller l'imprimante"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Désinstallation de l'ancienne imprimante Ť %s ť..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Imprimante par défaut"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "L'imprimante Ť %s ť est maintenant celle par défaut."
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr "Ajout de l'imprimante ŕ StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr "L'imprimante Ť %s ť a été ajoutée avec succčs ŕ StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr "Impossible d'ajouter l'imprimante Ť %s ť ŕ StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr "Retrait de l'imprimante de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr "L'imprimante Ť %s ť a été retirée avec succčs de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr "Impossible de retirer l'imprimante Ť %s ť de StarOffice/OpenOffice"
-
-#: ../../printerdrake.pm_.c:2836
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Désirez-vous vraiment désinstaller l'imprimante Ť %s ť?"
-
-#: ../../printerdrake.pm_.c:2838
-#, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Suppression de l'imprimante Ť %s ť..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Configuration des serveurs mandataires (proxy)"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Bienvenue dans la configuration du serveur mandataire (proxy).\n"
-"\n"
-"Vous allez pouvoir configurer ici vos serveurs mandataires http et ftp\n"
-"avec ou sans identifiant et mot de passe\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Veuillez entrer les informations concernant le mandataire http\n"
-"ou laissez-les vide si vous ne voulez pas de ce mandataire"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "L'URL doit commencer par 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Le numéro de port doit ętre numérique"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Veuillez entrer les informations concernant le mandataire ftp\n"
-"ou laissez-les vide si vous ne voulez pas de ce mandataire"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "L'URL doit commencer par 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Veuillez entrer l'identifiant et le mot de passe pour le mandataire,\n"
-"si nécessaire.\n"
-"Laissez-les vides si vous n'en voulez pas"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "identifiant"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Mot de passe"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "Ré-entrer le mot de passe"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Les mots de passe ne correspondent pas. Réessayez !"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-"Impossible d'ajouter une partition au RAID md%d car\n"
-"celui-ci est déjŕ formaté"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Impossible d'écrire le fichier %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "Ť mkraid ť a échoué"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "Ť mkraid ť a échoué (les Ť raidtools ť sont-ils installés ?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Trop peu de partitions pour du RAID de niveau %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"Démarrage ou arręt du systčme sonore ALSA (Advanced Linux Sound "
-"Architecture) Il charge le pilote pour votre carte son, et restaure les "
-"réglages du périphérique de mixage."
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-"Anacron exécute des tâches périodiques avec une précision exprimée en jours. "
-"Les tâches sont exécutées automatiquement au redémarrage de la machine si "
-"elles ont expirés leur délai. Quelques tâches de maintenance quotidiennes et "
-"hebdomadaires sont préconfigurées pour le systčme Mandrake.(Plus d'infos "
-"dans Ť man anacron ť)"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd surveille l'état de la batterie d'un portable, et en garde une trace "
-"(via syslog). Il peut ętre utilisé pour arręter proprement la machine "
-"lorsque la batterie est trčs faible et aprčs avoir averti les utilisateurs."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Service qui permet de démarrer une tâche ŕ une heure précise. Chaque tâche "
-"doit ętre créée par la commande Ť at ť, puis, a l'heure dite, le service "
-"Ť atd ť lance cette tâche. Par exemple pour éteindre automatiquement la "
-"machine ce soir ŕ 23h59, tapez Ť at 23:59 ť dans une fenętre de commande, "
-"puis Ť halt ť et <Ctrl-D>."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron est un planificateur de tâches. Contrairement ŕ Anacron, les tâches "
-"sont exécutées ŕ des moments précis, pendant lesquels la machine doit ętre "
-"allumée. Ť Vixie cron ť ajoute des fonctionnalités au Ť cron ť UNIX de base "
-"(notamment une meilleure sécurité et des options de configuration plus "
-"complčtes)."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM permet d'utiliser la souris dans des applications fonctionnant en mode "
-"texte dans la console (comme par exemple Midnight Commander) . Il permet "
-"également d'utiliser le copier-coller et inclut le support des menus "
-"contextuels sur la console."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake effectue une détection matérielle, et configure éventuellement le "
-"nouveau matériel."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache est un serveur web (HTTP). Il est utilisé pour faire fonctionner un "
-"site internet."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Le métaserveur Ť inetd ť sert ŕ démarrer automatiquement les autres serveurs "
-"réseau lorsqu'une requęte est détectée. Il est notamment responsable du "
-"démarrage des serveurs telnet, ftp, rsh et rlogin, etc. Le désactiver "
-"revient ŕ désactiver tous les services qu'il gčre."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Démarre le filtrage des paquets réseau pour la série 2.2 des noyaux Linux, "
-"afin de mettre en place un pare-feu (firewall) pour protéger votre machine "
-"des attaques réseau. "
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ce paquetage active la disposition de clavier défini dans le fichier /etc/"
-"sysconfig/keyboard. Cette disposition peut ętre modifiée en utilisant "
-"l'outil kbdconfig. Ce service devrait ętre activé sur la plupart des "
-"machines."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Régénération automatique des fichiers d'en-tętes pour le noyau\n"
-"dans le dossier /boot pour /usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Détection automatique et configuration du matériel au démarrage."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf effectue certaines tâches au démarrage afin de maintenir la "
-"configuration du systčme."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Lpd est le serveur d'impression nécessaire au bon fonctionnement de la "
-"commande lpr. Il permet gérer les files d'attente et les demandes "
-"d'impression."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Activation / désactivation du Linux Virtual Server, qui est un service "
-"utilisé pour créer un serveur virtuel haute-performance et haute "
-"disponibilité, composé d'un ensemble de serveur linux reliés entre eux."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Named (BIND) est un Serveur de Noms de Domaine (DNS) qui est utilisé pour "
-"convertir les adresses internet en adresses IP. (Il est principalement mis "
-"en place par les fournisseur d'accčs)"
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Effectue la connexion ou la déconnexion (montage et démontage) vers les "
-"systčmes de fichiers distants ou répertoires partagés de type NFS (Unix), "
-"SMB (Windows), et NCP (Netware) que vous avez configurés. (Pour NFS et SMB, "
-"voir le Ť Centre de contrôle Mandrake ť, dans la section Ť matériel / "
-"points de montage ť)"
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Gestion groupée de toutes les connexions réseau que vous avez configurées et "
-"que vous avez choisi d'activer dčs le démarrage du systčme. (par ex. vos "
-"connexions pour le réseau local et l'ADSL ou le Cable). Vous pouvez accéder "
-"séparément ŕ vos interfaces réseau grâce au Ť Centre de Contrôle Mandrake ť "
-"dans la section Ť Internet et réseau ť."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Démarrage ou arręt du serveur NFS. Un serveur NFS permet d'effectuer un "
-"partage de fichiers en ouvrant l'accčs ŕ certains dossiers depuis un réseau. "
-"Les dossiers partagés sont listés dans le fichier /etc/exports, mais vous "
-"pouvez l'éditer grâce ŕ Ť linuxconf ť dans la section Ť réseau / serveur ť."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Ce service permet le démarrage des fonctionnalités de verrouillage des "
-"fichiers pour NFS, lorsque le noyau ne les a pas démarrées lui-męme. Cela "
-"dit les noyaux récents n'en ont pas besoin. Cependant, le service statd est "
-"aussi démarré et sert ŕ avertir les clients distants de l'arręt du serveur "
-"NFS."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Activation de la touche Ť Verr Num ť du pavé numérique du clavier au "
-"démarrage."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Support des imprimantes winprinter OKI 4w et compatibles."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA permet d'utiliser des périphériques PCCARD comme des cartes Ethernet "
-"ou des modems avec des ordinateurs portables. Ce service ne sera pas démarré "
-"ŕ moins qu'il soit correctement configuré. Il peut donc ętre activé sans "
-"danger sur des machines ne possédant pas ce type de périphériques."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Le portmapper gčre les connexions RPC qui sont utilisées par des serveurs "
-"comme NFS et NIS. Le serveur portmap doit ętre activé sur des machines "
-"jouant le rôle de serveur pour des protocoles utilisant le mécanisme RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix est un agent de transport du courrier (Mail Transport Agent - MTA) "
-"permettant l'échange de courriers électroniques entre machines."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sauvegarde et restaure l'entropie du systčme pour une meilleure génération "
-"de nombres aléatoires. (utile par exemple pour la création de clefs de "
-"cryptographie)"
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Permet de faire apparaître des périphériques de type bloc (par ex. "
-"partitions de disque dur) comme des périphériques bruts ŕ accčs direct (raw "
-"devices). Les correspondances sont établies dans le fichier /etc/sysconfig/"
-"rawdevices, et c'est la commande Ť raw ť qui est utilisée. Cela peut ętre "
-"utilisé par des bases de données comme Oracle."
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Le service routed permet la mise ŕ jour automatique des tables de routage IP "
-"grâce au protocole RIP. Bien que RIP soit trčs utilisé sur les petits "
-"réseaux, des protocoles de routage plus complets sont nécessaires pour les "
-"réseaux de plus grande taille. "
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Le protocole rstat permet aux utilisateurs sur un męme réseau d'obtenir des "
-"mesures de la performance de n'importe quelle machine sur ce réseau."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Le protocole rusers permet aux utilisateurs de connaître tous les "
-"utilisateurs connectés aux machines supportant ce protocole."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Le protocole rwho permet aux utilisateurs distants d'obtenir une liste des "
-"utilisateurs connectés ŕ une machine qui fait tourner le démon rwho "
-"(similaire ŕ finger)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Démarrer le systčme de gestion du son sur votre machine."
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog est un service utilisé par beaucoup d'autres services pour "
-"enregistrer des rapports d'activité. C'est une trčs bonne idée de toujours "
-"l'activer."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Charger les pilotes pour vos périphériques usb."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"Démarre le serveur de polices de caractčres, obligatoire pour le "
-"fonctionnement de l'interface graphique (XFree)"
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Choisissez les services ŕ démarrer automatiquement lors du démarrage du "
-"systčme"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Impression"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr "Partage de fichiers"
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-msgid "System"
-msgstr "Systčme"
-
-#: ../../services.pm_.c:133
-msgid "Remote Administration"
-msgstr "Administration ŕ distance"
-
-#: ../../services.pm_.c:141
-msgid "Database Server"
-msgstr "Serveur de base de données"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Services : %d activés sur %d enregistrés"
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Services"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "actif"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "arręté"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Serveurs et services"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Pas d'autre information au sujet de ce service, désolé."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Au démarrage"
-
-#: ../../services.pm_.c:236
-msgid "Start"
-msgstr "Démarrer"
-
-#: ../../services.pm_.c:236
-msgid "Stop"
-msgstr "Arręter"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr "Merci d'avoir choisi Mandrake Linux 8.2"
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr "Bienvenue dans le monde Open Source"
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-"Le principe du logiciel libre est ŕ l'origine de MandrakeSoft et de son "
-"succčs. Ce systčme d'exploitation est le fruit du travail collaboratif et "
-"ouvert de la communauté Linux. Ses contributeurs passionnés sont répartis "
-"dans le monde entier."
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-msgid "Join the Free Software world"
-msgstr "Rejoignez le monde du logiciel libre !"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-"Pour mieux connaître la communauté Open Source et y contribuer, apprendre, "
-"partager vos connaissances, aider les autres membres et participer au "
-"développement d'outils, vous pouvez accéder aux nombreux forums de "
-"discussions sur nos pages Ť Communauté ť."
-
-#: ../../share/advertising/02-internet.pl_.c:9
-msgid "Internet and Messaging"
-msgstr "Internet et Messagerie"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-"Mandrake Linux 8.2 vous fournit les meilleures applications pour accéder au "
-"meilleur de l'Internet: parcourir le web, visualiser des animations via "
-"Mozilla ou Konqueror, échanger des e-mails et gérer vos informations "
-"personnelles avec Evolution ou Kmail, et bien plus."
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-msgid "Multimedia and Graphics"
-msgstr "Multimédia et Graphisme"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-"Grâce ŕ Mandrake Linux 8.2, profitez au maximum des capacités multimédia de "
-"votre ordinateur. Utilisez les plus récentes applications pour gérer vos "
-"fichiers audio et vidéo, éditer vos images ou collections de photos et "
-"regarder la télévision et vos vidéos, et bien plus."
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Développement"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-"Mandrake Linux 8.2 est la plate-forme de choix pour le développement. "
-"Découvrez la puissance du compilateur GNU gcc ainsi que les meilleurs "
-"environnements Open Source."
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-msgid "Mandrake Control Center"
-msgstr "Mandrake Control Center"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-"Le Centre de Contrôle Mandrake de Mandrake Linux 8.2 vous permet de "
-"configurer entičrement vos matériels et administrer votre machine depuis la "
-"męme application."
-
-#: ../../share/advertising/06-user.pl_.c:9
-msgid "User interfaces"
-msgstr "Interfaces utilisateur"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-"Mandrake Linux 8.2 fournit 11 environnements graphiques et gestionnaires de "
-"fenętres différents : GNOME 1.4, KDE 2.2.2, Window Maker 0.8, ..."
-
-#: ../../share/advertising/07-server.pl_.c:9
-msgid "Server Software"
-msgstr "Logiciels Serveurs"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-"En quelques clics, transformer votre ordinateur en un puissant serveur : "
-"Serveur Web, e-Mail, Pare-Feu, Routeur, Partage de Fichiers et "
-"d'Imprimantes..."
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Jeux"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-"Mandrake Linux 8.2 vous fournit les meilleurs Jeux Open Source en arcade, "
-"action, sport, réflexion, stratégie, ..."
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr "MandrakeCampus"
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-"Voulez-vous apprendre au sujet de Linux de maničre simple, rapide et "
-"gratuite ? MandrakeCampus fournit un service d'apprentissage en ligne "
-"gratuit et Open Source, ainsi que des tests pour mesurer vos progrčs, sur "
-"MandrakeCampus -- votre centre d'apprentissage en ligne."
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-msgid "MandrakeExpert"
-msgstr "MandrakeExpert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-"Bénéficiez de l'aide de la communauté et de MandrakeSoft pour obtenir un "
-"support de qualité. En tant qu'expert, vous pourrez partagez vos "
-"connaissances et proposer du support ŕ d'autres utilisateurs sur :"
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr "MandrakeConsulting"
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-"Parce que chaque projet soulčve une problématique particuličre, nos "
-"consultants sont ŕ vos cotés pour vous aider ŕ trouver les réponses. "
-"MandrakeSoft vous apporte une véritable alternative informatique issue de "
-"son expérience d'éditeur."
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr "MandrakeStore"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-"L'ensemble de nos solutions Linux, de nos offres exclusives sur nos produits "
-"et goodies sont disponibles via notre site de vente en ligne"
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-"Pour plus d'informations sur les services professionnels et les offres "
-"commerciales de MandrakeSoft, veuillez consulter la page web suivante :"
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr "http://www.mandrakesoft.com/sales/contact"
-
-#: ../../standalone.pm_.c:25
-msgid "Installing packages..."
-msgstr "Installation des paquetages..."
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"La table des partitions ne peut ętre lue car elle semble endommagée.\n"
-"Une réinitialisation des partitions endommagées va ętre tentée."
-
-#: ../../standalone/drakautoinst_.c:45
-msgid "Error!"
-msgstr "Erreur !"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Impossible de trouver le fichier image Ť %s ť."
-
-#: ../../standalone/drakautoinst_.c:48
-msgid "Auto Install Configurator"
-msgstr "Configurateur d'installation automatisée"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-"Vous ętes sur le point de configurer une disquette d'auto-installation. "
-"Cette fonctionnalité est relativement dangereuse, et doit donc ętre utilisée "
-"avec précaution.\n"
-"\n"
-"La disquette d'auto-installation vous permettra d'installer un autre "
-"ordinateur avec exactement la męme configuration que le vôtre. Mais parmi "
-"l'ensemble des étapes d'installation, vous pouvez choisir lesquelles seront "
-"complčtement automatisées et lesquelles seront manuelles.\n"
-"Pour une sűreté maximale, les étapes de partitionnement et de formatage ne "
-"seront jamais faites automatiquement, quels que soient les choix que vous "
-"aviez fait lors de la premičre installation de cet ordinateur.\n"
-"\n"
-"Souhaitez-vous continuer ?"
-
-#: ../../standalone/drakautoinst_.c:71
-msgid "Automatic Steps Configuration"
-msgstr "Configuration des étapes automatiques"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Veuillez choisir, pour chaque étape, si celle-ci doit ętre rejouée comme "
-"pendant votre installation, ou si elle doit s'effectuer manuellement."
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Bienvenue.\n"
-"\n"
-"Les paramčtres de l'installation automatique sont disponibles dans les "
-"sections sur la gauche."
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Félicitations !"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"La disquette a été générée avec succčs.\n"
-"Vous pouvez maintenant rejouer votre installation."
-
-#: ../../standalone/drakautoinst_.c:282
-msgid "Auto Install"
-msgstr "Installation automatique"
-
-#: ../../standalone/drakautoinst_.c:352
-msgid "Add an item"
-msgstr "Ajouter un élément"
-
-#: ../../standalone/drakautoinst_.c:359
-msgid "Remove the last item"
-msgstr "Supprimer le dernier élément"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-"\n"
-" Rapport de sauvegarde (DrakBackup) \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" Rapport de sauvegarde périodique (DrakBackup)\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-" Détails du rapport de sauvegarde\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr "TOTAL :"
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr "Sauvegarde des fichiers systčmes..."
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-msgid "Hard Disk Backup files..."
-msgstr "Sauvegarde sur disque dur..."
-
-#: ../../standalone/drakbackup_.c:615
-msgid "Backup User files..."
-msgstr "Sauvegarde des comptes utilisateurs..."
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr "Sauvegarde sur disque dur..."
-
-#: ../../standalone/drakbackup_.c:666
-msgid "Backup Other files..."
-msgstr "Sauvegarde des autres fichiers..."
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-"liste envoyée par FTP : %s\n"
-" "
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"(!) Problčme de connection FTP: impossible d'envoyer les sauvegardes par "
-"FTP.\n"
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr "(!) Erreur lors de l'envoi du mail?\n"
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-msgid "File Selection"
-msgstr "Sélection de fichiers ou dossiers"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Sélectionnez les fichiers ou dossiers puis cliquez sur Ť Ajouter ť"
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Veuillez cocher toutes les options dont vous avez besoin.\n"
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ces options peuvent sauvegarder et restaurer\n"
-"tous les fichiers du dossier de configuration systčme Ť /etc ť\n"
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr "Sauvegarder le dossier de configuration systčme (dossier /etc)"
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr "Sauvegardes incrémentales (économie d'espace)"
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Ne pas inclure les fichiers critiques (passwd, group, fstab)"
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Note : la sauvegarde incrémentale n'écrase pas les anciennes sauvegardes."
-
-#: ../../standalone/drakbackup_.c:812
-msgid "Please check all users that you want to include in your backup."
-msgstr "Veuillez cocher tous les comptes utilisateurs ŕ sauvegarder"
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr "Ne pas inclure le cache du navigateur internet (fichiers tampon)"
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr "Sauvegardes incrémentales (économie d'espace)"
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-msgid "Remove Selected"
-msgstr "Supprimer sélection"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Utilisateurs..."
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr "Sauvegarder par FTP"
-
-#: ../../standalone/drakbackup_.c:967
-msgid "Please enter the host name or IP."
-msgstr "Nom d'hôte ou adresse IP de la machine de sauvegarde"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr "Dossier oů poser la sauvegarde sur cette machine"
-
-#: ../../standalone/drakbackup_.c:977
-msgid "Please enter your login"
-msgstr "Nom de connexion sur cette machine"
-
-#: ../../standalone/drakbackup_.c:982
-msgid "Please enter your password"
-msgstr "Veuillez entrer votre mot de passe"
-
-#: ../../standalone/drakbackup_.c:988
-msgid "Remember this password"
-msgstr "Se souvenir du mot de passe"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-msgid "FTP Connection"
-msgstr "par connexion FTP..."
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-msgid "Secure Connection"
-msgstr "par connexion sécurisée..."
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr "Sauvegarder sur CDR (ou DVDR)"
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-msgid "Please choose your CD space"
-msgstr "Veuillez choisir la taille de votre CD"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-msgid "Please check if you are using CDRW media"
-msgstr "CD Réinscriptible"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr "Effacer le CDRW avant sauvegarde"
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-"Veuillez vérifier que vous voulez inclure\n"
-"le lanceur de l'installation sur votre CD"
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"Veuillez entrer l'emplacement de votre graveur (bus,id,lun)\n"
-"(détecter avec Ť cdrecord -scanbus ť. Par exemple : 0,1,0 )"
-
-#: ../../standalone/drakbackup_.c:1153
-msgid "Use tape to backup"
-msgstr "Sauvegarde sur cartouche"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr "Nom de périphérique du matériel de sauvegarde (/dev/...?)"
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr "Taille maximale de sauvegarde :"
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-msgid "Please enter the directory to save:"
-msgstr "Dossier oů poser la sauvegarde :"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-msgid "Use quota for backup files."
-msgstr "Limiter la taille de la sauvegarde"
-
-#: ../../standalone/drakbackup_.c:1267
-msgid "Network"
-msgstr "par transfert réseau..."
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr "Dans un dossier (local ou partagé)..."
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr "toutes les heures"
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr "tous les jours"
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr "toutes les semaines"
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr "tous les mois"
-
-#: ../../standalone/drakbackup_.c:1312
-msgid "Use daemon"
-msgstr "Sauvegarde périodique"
-
-#: ../../standalone/drakbackup_.c:1317
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Veuillez choisir l'intervalle de temps entre les sauvegardes"
-
-#: ../../standalone/drakbackup_.c:1323
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Quelle sauvegarde sera périodique ?"
-
-#: ../../standalone/drakbackup_.c:1327
-msgid "Use Hard Drive with daemon"
-msgstr "celle sur Disque dur / NFS"
-
-#: ../../standalone/drakbackup_.c:1329
-msgid "Use FTP with daemon"
-msgstr "celle par FTP"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"ATTENTION : Le Ť cron ť doit ętre actif dans vos services. (voir le Ť Centre "
-"de Contrôle Mandrake ť section Ť systčme / services ť)"
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr "Envoyer un rapport par mail aprčs chaque sauvegarde ŕ :"
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr "Quoi..."
-
-#: ../../standalone/drakbackup_.c:1416
-msgid "Where"
-msgstr "Oů..."
-
-#: ../../standalone/drakbackup_.c:1421
-msgid "When"
-msgstr "Quand..."
-
-#: ../../standalone/drakbackup_.c:1426
-msgid "More Options"
-msgstr "Plus d'options..."
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-msgid "Drakbackup Configuration"
-msgstr "Configuration de sauvegarde Drakbackup"
-
-#: ../../standalone/drakbackup_.c:1463
-msgid "Please choose where you want to backup"
-msgstr "Veuillez choisir oů stocker la sauvegarde"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr "sur disque dur"
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr "par réseau"
-
-#: ../../standalone/drakbackup_.c:1540
-msgid "Please choose what you want to backup"
-msgstr "Veuillez choisir ce que vous voulez sauvegarder"
-
-#: ../../standalone/drakbackup_.c:1541
-msgid "Backup system"
-msgstr "Sauvegarder le systčme"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr "Sauvegarder les comptes utilisateurs"
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr "Sélectionner individuellement les utilisateurs"
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sources de sauvegarde : \n"
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Fichiers systčme:\n"
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Données des utilisateurs :\n"
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Autres fichiers ou dossiers :\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-"\n"
-"- Sauvegarde sur le disque dur dans le dossier : %s\n"
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-"\n"
-"- Sauvegarde par FTP sur la machine : %s\n"
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nom de connexion : %s\n"
-"\t\t dans le dossier : %s \n"
-
-#: ../../standalone/drakbackup_.c:1637
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Options:\n"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr "\tFichiers systčmes non inclus\n"
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tLe sauvegarde utilise Ť tar ť et Ť bzip2 ť\n"
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tLa sauvegarde utilise Ť tar ť et Ť gzip ť\n"
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-"\n"
-"- Le Démon (%s) comprend :\n"
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr "\t-celle sur Disque dur.\n"
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr "\t-celle sur CDR.\n"
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr "\t-celle par transfert FTP.\n"
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr "\t-celle par transfert SSH.\n"
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"La configuration de sauvegarde n'est pas encore définie. \n"
-"Veuillez cliquer sur Ť Configuration par assistant ť, ou Ť Configuration "
-"manuelle ť\n"
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste de données ŕ restaurer :\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste des données corrompues :\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:1755
-msgid "Please uncheck or remove it on next time."
-msgstr "Veuillez le décocher ou le retirer la prochaine fois"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr "Les fichiers de sauvegarde sont corrompus"
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr " Toutes vos données sélectionnées ont été "
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-" correctement restaurées en prenant Ť %s ť comme dossier racine "
-
-#: ../../standalone/drakbackup_.c:1886
-msgid " Restore Configuration "
-msgstr " Restauration de la configuration "
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr "OK pour restaurer les autres fichiers."
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Fichiers de sauvegarde ŕ restaurer (seul le plus récent compte)"
-
-#: ../../standalone/drakbackup_.c:1972
-msgid "Backup the system files before:"
-msgstr "Sauvegarder les fichiers systčme avant :"
-
-#: ../../standalone/drakbackup_.c:1974
-msgid "please choose the date to restore"
-msgstr "Veuillez choisir la date ŕ restaurer"
-
-#: ../../standalone/drakbackup_.c:2002
-msgid "Use Hard Disk to backup"
-msgstr "Sauvegarde sur disque dur"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr "Restaurer ŕ partir d'un dossier"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr "Veuillez entrer le dossier oů résident les sauvegardes"
-
-#: ../../standalone/drakbackup_.c:2143
-msgid "Select another media to restore from"
-msgstr "Choisir un autre support de sauvegarde"
-
-#: ../../standalone/drakbackup_.c:2145
-msgid "Other Media"
-msgstr "Autre support"
-
-#: ../../standalone/drakbackup_.c:2151
-msgid "Restore system"
-msgstr "Restaurer le systčme"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr "Restaurer les comptes utilisateurs"
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr "Restaurer les autres fichiers ou dossiers"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr "Choisir un autre dossier racine de restauration ( au lieu de / )"
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Nouvelle sauvegarde avant restauration (seulement pour l'incrémental)"
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr "Retirer les dossiers personnels ds utilisateurs avant restauration"
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr "Restaurer toutes les sauvegardes..."
-
-#: ../../standalone/drakbackup_.c:2225
-msgid "Custom Restore"
-msgstr "Restauration personnalisée..."
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Aide"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "<- Précédent"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-msgid "Save"
-msgstr "Valider"
-
-#: ../../standalone/drakbackup_.c:2317
-msgid "Build Backup"
-msgstr "Sauvegarder !"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Restaurer !"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-msgid "Next"
-msgstr "Suivant ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-"Merci de vouloir faire une sauvegarde avant de vouloir restaurer... (ou bien "
-"vérifiez que votre dossier de sauvegarde est correct)"
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-"Impossible d'envoyer un mail\n"
-" Votre rapport n'a pas été envoyé\n"
-" Veuillez configurer Ť sendmail ť"
-
-#: ../../standalone/drakbackup_.c:2522
-msgid "Package List to Install"
-msgstr "Liste des paquetages ŕ installer"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-"Erreur pendant l'envoi par FTP.\n"
-" Veuillez corriger votre configuration FTP"
-
-#: ../../standalone/drakbackup_.c:2573
-msgid "Please select data to restore..."
-msgstr "Veuillez choisir les données ŕ restaurer..."
-
-#: ../../standalone/drakbackup_.c:2594
-msgid "Please select media for backup..."
-msgstr "Veuillez choisir le support de sauvegarde..."
-
-#: ../../standalone/drakbackup_.c:2616
-msgid "Please select data to backup..."
-msgstr "Veuillez choisir les données ŕ sauvegarder..."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"La configuration de sauvegarde n'est pas encore définie. \n"
-"Veuillez cliquer sur Ť Configuration par assistant ť, ou Ť Configuration "
-"manuelle ť"
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr "En développement ... veuillez patienter."
-
-#: ../../standalone/drakbackup_.c:2739
-msgid "Backup system files"
-msgstr "Sauvegarde des fichiers systčmes..."
-
-#: ../../standalone/drakbackup_.c:2741
-msgid "Backup user files"
-msgstr "Sauvegarde des comptes utilisateurs..."
-
-#: ../../standalone/drakbackup_.c:2743
-msgid "Backup other files"
-msgstr "Sauvegarde des autres fichiers ou dossiers..."
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr "TOTAL :"
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr "Envoi par FTP"
-
-#: ../../standalone/drakbackup_.c:2771
-msgid "Sending files..."
-msgstr "Envoi des fichiers..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr "Liste ŕ include sur le CDR"
-
-#: ../../standalone/drakbackup_.c:2899
-msgid "Please enter the cd writer speed"
-msgstr "Veuillez taper la vitesse de gravure :"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-"Veuillez entrer l'emplacement de votre graveur (bus,id,lun)\n"
-"(détecter avec Ť cdrecord -scanbus ť. Par exemple : 0,1,0 )"
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Veuillez vérifier si vous voulez Inclure l'install boot sur le CD"
-
-#: ../../standalone/drakbackup_.c:2989
-msgid "Backup Now from configuration file"
-msgstr "Sauvegarder ŕ partir de la configuration définie"
-
-#: ../../standalone/drakbackup_.c:2999
-msgid "View Backup Configuration."
-msgstr "Voir la configuration de sauvegarde"
-
-#: ../../standalone/drakbackup_.c:3020
-msgid "Wizard Configuration"
-msgstr "Configuration par assistant"
-
-#: ../../standalone/drakbackup_.c:3024
-msgid "Advanced Configuration"
-msgstr "Configuration manuelle"
-
-#: ../../standalone/drakbackup_.c:3028
-msgid "Backup Now"
-msgstr "Sauvegarder !"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-"description des options :\n"
-"\n"
-" Ŕ cette étape, Drakbackup vous permet de changer :\n"
-"\n"
-" - Le mode de compression :\n"
-" \n"
-" Si vous cochez la compression bzip2, vous compresserez\n"
-" mieux qu'avec gzip (de 2 ŕ 10 %).\n"
-" Cette option n'est pas choisie par défaut\n"
-" parce qu'elle est beaucoup plus lente.\n"
-" \n"
-" - Le mode de mise-ŕ-jour:\n"
-"\n"
-" Cette option mets ŕ jour votre sauvegarde, mais\n"
-" n'est pas vraiment utile car vous devez la\n"
-" décompresser avant de la mettre ŕ jour.\n"
-" \n"
-" - le mode .backupignore :\n"
-"\n"
-" Comme avec CVS, Drakbackup va ignorer les références\n"
-" incluses dans les fichiers .backupignore de chaque dossier.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" Certaines erreurs lors de l'envoi de mails peuvent ętre causées par\n"
-" une mauvaise configuration de postfix. Pour le résoudre, vous devez\n"
-" configurer le nom de machine ou de domaine dans /etc/postfix/main.cf.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-"description des options :\n"
-"\n"
-" - Sauvegarde des fichiers systčmes :\n"
-" \n"
-"\tCette option vous permet de sauvegarder votre dossier /etc,\n"
-"\tqui contient tous les fichiers de configuration. Faites attention\n"
-"\tpendant la restauration de ne pas écraser :\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Sauvegarde des comptes utilisateurs :\n"
-"\n"
-"\tCette option vous permet de choisir les utilisateurs \n"
-"\tŕ sauvegarder.\n"
-"\tPour préserver l'espace disque, il est recommandé\n"
-"\tde ne pas inclure les dossier Ť cache ť des navigateurs.\n"
-"\n"
-" - Sauvegarde des autres fichiers : \n"
-"\n"
-"\tCette option vous permet d'ajouter d'autres données\n"
-"\tŕ sauvegarder. Pour l'instant il n'est pas possible de faire\n"
-"\tune sauvegarde incrémentale avec cette option.\t\t\n"
-" \n"
-" - Sauvegardes incrémentales:\n"
-"\n"
-"\tLa sauvegarde incrémentale est l'option la \n"
-"\tplus puissante pour la sauvegarde. Elle vous permet \n"
-"\tde tout sauver la premičre fois, puis seulement les \n"
-"\tchangements les fois suivantes.\n"
-"\tAinsi vous serez capable de restaurer les données\n"
-"\tcorrespondant ŕ n'importe quelle sauvegarde précédente.\n"
-"\t\n"
-"\tSi vous n'avez pas sélectionné cette option, toutes\n"
-"\tvos sauvegardes précédentes sont préalablement éffacées. \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"description de la restauration :\n"
-" \n"
-"Seule la date de sauvegarde choisie la plus récente sera utilisée, car avec\n"
-"le mode incrémental, toutes les sauvegardes précédentes doivent ętre "
-"restaurées.\n"
-"\n"
-"Donc si vous ne voulez pas restaurer un utilisateur, décochez toutes ses "
-"cases\n"
-"\n"
-"Sinon, vous ne pouvez en choisir qu'une\n"
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-" Copyright (C) 2001 MandrakeSoft par DUPONT Sébastien <dupont_s\\@epita.fr>"
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" Ce programme est un logiciel libre : vous pouvez le redistribuer\n"
-"et/ou le modifier selon les termes de la Ť GNU General Public\n"
-"License ť, tels que publiés par la Ť Free Software Foundation ť; soit\n"
-"la version 2 de cette licence ou (ŕ votre choix) toute version\n"
-"ultérieure.\n"
-"\n"
-"Ce programme est distribué dans l'espoir qu'il sera utile, mais\n"
-"SANS AUCUNE GARANTIE, ni explicite ni implicite; sans męme les\n"
-"garanties de commercialisation ou d'adaptation dans un but spécifique.\n"
-"Se référer ŕ la Ť GNU General Public License ť pour plus de détails.\n"
-"\n"
-"Vous devriez avoir reçu une copie de la Ť GNU General Public License ť\n"
-"en męme temps que ce programme; sinon, écrivez ŕ la Ť Free Software\n"
-"Foundation ť, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-" Drakbackup sert ŕ sauvegarder votre systčme.\n"
-" Pendant sa configuration vous pouvez sélectionner: \n"
-"\t- des fichiers systčmes, \n"
-"\t- des comptes utilisateur, \n"
-"\t- d'autres données.\n"
-"\tou Tout votre systčme ... et d'autres (comme des partitions Windows)\n"
-"\n"
-" Drakbackup vous permet de faire des sauvegarde sur:\n"
-"\t- Disque dur.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (avec autoboot, récupération and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cartouche.\n"
-"\n"
-" Drakbackup peut restaurer votre systčme vers un dossier choisi\n"
-"\n"
-" Par défaut toute sauvegarde sera stockée dans le\n"
-" dossier /var/lib/drakbackup\n"
-"\n"
-" Fichier de configuration :\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Étape de restauration :\n"
-" \n"
-" Pendant l'étape de restauration, DrakBackup va retirer \n"
-" votre dossier d'origine et vérifier que tous les \n"
-" fichiers de sauvegarde ne sont pas corrompus. Il est recommandé \n"
-" de faire une derničre sauvegarde avant restauration.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-"description des options :\n"
-"\n"
-"Attention en utilisant la sauvegarde par FTP, car seulement \n"
-"les sauvegardes déjŕ construites sont envoyées vers le serveur.\n"
-"Ainsi, pour le moment, vous devez faire une sauvegarde sur disque dur\n"
-"avant de l'envoyer vers le serveur.\n"
-"\n"
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-"\n"
-"Problčmes de restauration :\n"
-"\n"
-"Avant l'étape de restauration, Drakbackup va vérifier tous vos\n"
-"fichiers de sauvegarde. Les dossiers originaux seront effacés\n"
-"et vous allez perdre toutes vos données. Il est important de \n"
-"faire les choses avec précaution et de ne pas modifier ŕ la main\n"
-"les fichiers de sauvegarde.\n"
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-"Description:\n"
-"\n"
-" Drakbackup sert ŕ sauvegarder votre systčme.\n"
-" Pendant sa configuration vous pouvez sélectionner: \n"
-"\t- des fichiers systčmes, \n"
-"\t- des comptes utilisateur, \n"
-"\t- d'autres données.\n"
-"\tou Tout votre systčme ... et d'autres (comme des partitions Windows)\n"
-"\n"
-" Drakbackup vous permet de faire des sauvegarde sur:\n"
-"\t- Disque dur.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (avec autoboot, récupération and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Cartouche.\n"
-"\n"
-" Drakbackup peut restaurer votre systčme vers un dossier choisi\n"
-"\n"
-" Par défaut toute sauvegarde sera stockée dans le\n"
-" dossier /var/lib/drakbackup\n"
-"\n"
-" Fichier de configuration :\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Étape de restauration :\n"
-" \n"
-" Pendant l'étape de restauration, DrakBackup va retirer \n"
-" votre dossier d'origine et vérifier que tous les \n"
-" fichiers de sauvegarde ne sont pas corrompus. Il est recommandé \n"
-" de faire une derničre sauvegarde avant restauration.\n"
-"\n"
-"\n"
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "L'installation de %s a échoué pour la raison suivante :"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr "Chercher les polices installées"
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr "Désélectionner les polices installées"
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr "Parcourir toutes les polices"
-
-#: ../../standalone/drakfont_.c:253
-msgid "no fonts found"
-msgstr "aucune fonte trouvée"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "terminé"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr "impossible de trouver des polices dans vos disques"
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr "Résélectionnez des polices correctes"
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr "impossible de trouver des polices.\n"
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr "Chercher des polices dans la liste des installées"
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr "Copie des fontes"
-
-#: ../../standalone/drakfont_.c:353
-msgid "True Type fonts installation"
-msgstr "Installation de polices Ť True Type ť"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr "Veuillez patienter pendant Ť ttmkfdir ť"
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr "Installation Ť True Type ť terminée"
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr "Conversion de polices"
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr "création de type1inst"
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr "Inscription dans ghoscript"
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr "Conversion de polices Ť True Type ť"
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr "Conversion de polices Ť pfm ť"
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr "Supprimer les fichiers temporaires"
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr "Relancer le serveur de polices"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr "Supprimer les fichiers de polices"
-
-#: ../../standalone/drakfont_.c:465
-msgid "xfs restart"
-msgstr "redémarrage du serveur de fonte"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-"Avant d'installer des polices de caractčres, assurez-vous que vous avez\n"
-"les permissions de les utiliser et de les installer sur votre systčme. \n"
-"\n"
-"- Vous pouvez installer les polices par la voie habituelle. Dans de rares "
-"cas,\n"
-"des polices boguées peuvent bloquer votre serveur d'affichage XFree."
-
-#: ../../standalone/drakfont_.c:547
-msgid "Fonts Importation"
-msgstr "Importation de polices"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr "Récupérer les polices de Windows"
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr "Désinstaller des polices"
-
-#: ../../standalone/drakfont_.c:568
-msgid "Advanced Options"
-msgstr "Options avancées"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr "Liste des polices"
-
-#: ../../standalone/drakfont_.c:739
-msgid "Choose the applications that will support the fonts :"
-msgstr "Choisissez les applications qui supporteront ces polices"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: ../../standalone/drakfont_.c:747
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: ../../standalone/drakfont_.c:751
-msgid "Abiword"
-msgstr "Abiword"
-
-#: ../../standalone/drakfont_.c:755
-msgid "Generic Printers"
-msgstr "Imprimante générique"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Sélectionnez les polices ou dossiers et cliquez sur Ť Ajouter ť"
-
-#: ../../standalone/drakfont_.c:828
-msgid "Install List"
-msgstr "Installe la liste"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr "Cliquez ici si vous ętes sűr"
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr "Ici sinon"
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr "Désélectionne tout"
-
-#: ../../standalone/drakfont_.c:899
-msgid "Selected All"
-msgstr "Sélectionne tout"
-
-#: ../../standalone/drakfont_.c:901
-msgid "Remove List"
-msgstr "Désinstalle la liste"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-msgid "Initials tests"
-msgstr "Tests initiaux"
-
-#: ../../standalone/drakfont_.c:920
-msgid "Copy fonts on your system"
-msgstr "Copier les polices sur votre systčme"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr "Installe et convertit des polices"
-
-#: ../../standalone/drakfont_.c:922
-msgid "Post Install"
-msgstr "Post-installation"
-
-#: ../../standalone/drakfont_.c:940
-msgid "Remove fonts on your system"
-msgstr "Retirer des polices de votre systčme"
-
-#: ../../standalone/drakfont_.c:941
-msgid "Post Uninstall"
-msgstr "Post-désinstallation"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Partage de la connexion internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Le partage de la connexion internet est activé"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion ŕ l'internet a déjŕ été\n"
-"effectuée. Elle est actuellement activée.\n"
-"\n"
-"Que voulez-vous faire ?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "désactiver"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "ne rien faire"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurer"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Désactivation des serveurs..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Le partage de la connexion ŕ l'internet est maintenant désactivé."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Le partage de la connexion ŕ l'internet est désactivé"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuration du partage de la connexion ŕ l'internet a déjŕ été\n"
-"effectuée. Elle est actuellement désactivée.\n"
-"\n"
-"Que voulez-vous faire ?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activer"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Activation des serveurs..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Le partage de la connexion internet est maintenant activé."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Votre ordinateur peut ętre paramétré afin de partager sa connexion "
-"internet.\n"
-"Avec cette fonctionnalité, d'autres ordinateurs sur votre réseau local "
-"pourront utiliser la connexion internet de cet ordinateur.\n"
-"\n"
-"Veuillez noter que vous avez besoin d'une carte réseau dédiée ŕ votre réseau "
-"local."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (utilisant le module %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Aucune carte réseau n'est présente dans votre systčme"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Aucune carte réseau n'a été détectée sur votre systčme. Veuillez utiliser "
-"l'outil de configuration du matériel."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Carte réseau"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Une seule carte réseau est configurée sur votre systčme :\n"
-"\n"
-"%s\n"
-"\n"
-"Je vais configurer votre réseau local avec cette carte réseau."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Veuillez choisir quelle carte réseau sera connectée ŕ votre réseau local"
-
-#: ../../standalone/drakgw_.c:271
-msgid "Network interface already configured"
-msgstr "Interface réseau déjŕ configurée"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Attention, la carte réseau (%s) est déjŕ configurée.\n"
-"\n"
-"Désirez-vous une reconfiguration automatique ?\n"
-"\n"
-"Vous pouvez le faire manuellement, mais vous devez savoir ce que vous faites."
-
-#: ../../standalone/drakgw_.c:277
-msgid "Automatic reconfiguration"
-msgstr "Reconfiguration automatique"
-
-#: ../../standalone/drakgw_.c:278
-msgid "Show current interface configuration"
-msgstr "Montrer la configuration actuelle"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Configuration actuelle de Ť %s ť :\n"
-"\n"
-"Réseau : %s\n"
-"Adresse IP : %s\n"
-"Attribution de l'adresse : %s\n"
-"Pilote : %s"
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-"Je peux conserver votre configuration actuelle, et supposer que vous avez "
-"déjŕ\n"
-"configuré un serveur DHCP ; dans ce cas veuillez vérifier que j'ai "
-"correctement\n"
-"lu l'adresse du réseau de Classe C que vous utilisez pour votre réseau "
-"local ;\n"
-"je ne le reconfigurerai pas et je ne toucherai pas ŕ la configuration de "
-"votre\n"
-"serveur DHCP.\n"
-"\n"
-"Sinon, je peux reconfigurer votre interface et (re)configurer un serveur "
-"DHCP.\n"
-"\n"
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr "Réseau Local de class C"
-
-#: ../../standalone/drakgw_.c:298
-msgid "(This) DHCP Server IP"
-msgstr "Adresse IP du serveur DHCP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr "Re-configurer l'interface et le serveur DHCP"
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Le réseau local ne finissait pas par `.0', j'abandonne."
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Conflit potentiel d'adresses du réseau local trouvé dans la configuration de "
-"%s !\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Configuration du Firewall détectée"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Attention ! Une configuration existante du Firewall a été détectée. Vous "
-"devrez peut-ętre modifier la configuration manuellement aprčs l'installation."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configuration en cours..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configuration des scripts, installation des logiciels, démarrage des "
-"serveurs..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Des problčmes sont apparus en installant le paquetage %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Tout a été configuré.\n"
-"Vous pouvez maintenant partager votre connexion internet avec d'autres "
-"ordinateurs sur votre réseau local, en utilisant la configuration réseau "
-"automatique (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"La configuration a déjŕ été effectuée, mais elle est actuellement désactivée."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"La configuration a déjŕ été effectuée, et elle est actuellement activée."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Le partage de la connexion internet n'a encore jamais été configuré."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Configuration du partage de la connexion internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Bienvenue dans l'utilitaire de partage de connexion internet !\n"
-"\n"
-"%s\n"
-"\n"
-"Cliquez sur Configurer pour lancer l'assistant de configuration."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuration du réseau (%d cartes réseaux)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil : "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Effacer le profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil ŕ effacer :"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Nouveau profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Nom du profil ŕ créer (le nouveau profil est créé comme une copie du profil "
-"courant :"
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nom de machine : "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Accčs internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Type :"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Passerelle :"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface :"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "État :"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr "Veuillez patienter"
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurer l'accčs ŕ l'internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuration LAN (réseau local)"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Pilote"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocole"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "État"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurer le réseau local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr "Cliquez ici pour lancer l'assistant ->"
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Assistant..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Appliquer"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Veuillez patienter... mise en place de la configuration"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Connecté"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Non connecté"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Se connecter..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Se déconnecter..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Attention, une autre connexion internet a été détectée, peut-ętre utilisant "
-"votre réseau"
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune interface réseau configurée.\n"
-"Vous pouvez en configurer une en cliquant sur Ť Configurer ť"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuration du LAN (réseau local)"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Carte réseau %s : %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocole d'amorçage"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Lancer au démarrage"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr "activer maintenant"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr "désactiver maintenant"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Cette interface n'a pas encore été configurée.\n"
-"Lancez l'assistant de configuration dans la fenętre principale"
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Vous n'avez aucune connection internet.\n"
-"Vous pouvez en créer une en cliquant sur Ť Configurer ť"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuration de la connexion internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuration de la connexion internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Type de connexion : "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Paramčtres"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Passerelle"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Carte ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Client DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Mise en place du niveau de sécurité"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centre de contrôle"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Choisissez l'outil que vous voulez utiliser"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr "Canada (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr "USA (hertzien)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr "USA (cable)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr "USA (cable ou HRC)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr "Chine (hertzien)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr "Japon (hertzien)"
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr "Japon (cable)"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr "Europe de l'est"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "Ireland"
-msgstr "Irlande"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr "Europe de l'ouest"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Australia"
-msgstr "Australie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr "Nouvelle Zélande"
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr "Afrique du Sud"
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr "Argentine"
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"SVP,\n"
-"Veuillez choisir votre région et votre norme de TV"
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr "Norme TV :"
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr "Zone :"
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr "Recherche des canaux de télévision en cours ..."
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr "Recherche des canaux de télévision"
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr "Aucune carte TV détectée !"
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Aucune carte TV n'a été détectée sur votre ordinateur. Veuillez vérifier qu'une carte TV/Vidéo supportée par Linux est correctement branchée.\n"
-"\n"
-"\n"
-"Vous pouvez visiter notre base de données de support matériel ŕ :\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "utilisation : keyboarddrake [--expert] [clavier]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Veuillez choisir votre type de clavier."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voulez-vous que la touche BackSpace retourne Delete en console ?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Changer de cédérom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Changement de cédérom\n"
-"\n"
-"Veuillez insérer le cédérom d'Installation dans votre lecteur.\n"
-"Ceci fait, cliquez sur Ť OK ť.\n"
-"\n"
-"Si vous ne le possédez pas, cliquez sur Ť Annuler ť pour annuler la mise ŕ "
-"jour."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Impossible de démarrer la mise ŕ jour !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Les changements ont été effectués mais ne seront effectifs qu'aprčs votre "
-"déconnection"
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr "N'afficher que les pour les jours sélectionnés"
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Fichier/_Nouveau"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Fichier/_Ouvrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Fichier/_Enregistrer"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Fichier/Enregistrer _Sous"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Fichier/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Options"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Options/Test"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/_Aide"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Aide/_A propos..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-msgid "User"
-msgstr "Utilisateur"
-
-#: ../../standalone/logdrake_.c:174
-msgid "Messages"
-msgstr "Messages"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr "Syslog"
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr "Explications sur les Outils Mandrake"
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "chercher"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr "Un outil pour voir vos fichiers journaux"
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Paramčtres"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr "contenant"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr "mais ne contenant pas"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Choisir le fichier"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Calendrier"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr "Contenu du fichier"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr "Alerte mail/SMS"
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "s'il vous plaît attendez, examen du fichier : %s"
-
-#: ../../standalone/logdrake_.c:405
-msgid "Mail/SMS alert configuration"
-msgstr "Configuration des alertes mail/SMS"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Bienvenue dans l'utilitaire de configuration mail/SMS.\n"
-"\n"
-"Vous allez pouvoir configurer ici vos les alertes systčmes.\n"
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr "proftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr "sshd"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr "webmin"
-
-#: ../../standalone/logdrake_.c:419
-msgid "xinetd"
-msgstr "xinetd"
-
-#: ../../standalone/logdrake_.c:422
-msgid "service setting"
-msgstr "configuration des services"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-"Vous recevrez une alerte si l'un des services sélectionnés ne tourne plus"
-
-#: ../../standalone/logdrake_.c:433
-msgid "load setting"
-msgstr "chargement des paramčtres"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Vous recevrez une alerte si la charge machine dépasse cette valeur"
-
-#: ../../standalone/logdrake_.c:447
-msgid "alert configuration"
-msgstr "configuration des alertes"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr "Configurer les moyens de vous alerter"
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Enregistrer sous..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Veuillez choisir le type de votre souris."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "aucun périphérique USB série trouvé\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Émuler le troisičme bouton ?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr "%s trouvé sur %s, configurer ?"
-
-#: ../../standalone/scannerdrake_.c:60
-msgid "Select a scanner"
-msgstr "Sélectionnez un scanner"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr "Ce scanner %s n'est pas supporté"
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-"Scannerdrake n'a pas réussi ŕ détecter votre scanner %s.\n"
-"Veuillez sélectionner le périphérique sur lequel votre scanner est branché"
-
-#: ../../standalone/scannerdrake_.c:96
-msgid "choose device"
-msgstr "choisissez le périphérique"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-"Ce scanner (%s) doit ętre configurée par printerdrake.\n"
-"Vous pouvez lancer printerdrake depuis le Centre de Contrôle Mandrake dans "
-"la section Matériel"
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"Votre scanner %s a été configuré.\n"
-"Vous pouvez maintenant scanner des documents en utilisant Ť XSane ť ŕ partir de Multimédia/Graphisme dans le menu des applications."
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Configuration du Firewall"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Configuration du Firewall"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Firewall (pare-feu)\n"
-"\n"
-"Vous avez déjŕ configuré un firewall.\n"
-"Cliquez sur Ť Configurer ť pour changer ou supprimer le firewall"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Pare-feu (Firewall)\n"
-"\n"
-"Cliquez sur Configurer pour mettre en place un pare-feu standard"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Choix de la langue"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Classe d'installation"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Détection des disques durs"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configuration de la souris"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Choix du clavier"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sécurité"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Systčmes de fichiers"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatage des partitions"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Choix des paquetages"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Installation du systčme"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Ajout des utilisateurs"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configuration du réseau"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configuration des services"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Programme d'amorçage"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Disquette d'amorçage"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configuration de X"
-
-#: ../../steps.pm_.c:34
-msgid "Install system updates"
-msgstr "Mise-ŕ-jour systčme"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Fin de l'installation"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Configuration d'un mini-firewall\n"
-"\n"
-"Cela configure un firewall (pare-feu) personnel pour votre machine Mandrake "
-"Linux.\n"
-"Si vous souhaitez un firewall plus puissant ou dédié, veuillez plutôt "
-"utiliser\n"
-"la distribution spécialisée Ť MandrakeSecurity ť."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Nous allons maintenant vous poser des questions sur quels services vous\n"
-"souhaitez pouvoir connecter ŕ l'internet. Veuillez réfléchir avec soin sur\n"
-"chacune de ces questions, car la sécurité de votre ordinateur est\n"
-"importante.\n"
-"\n"
-"S'il vous plaît, si vous n'utilisez par l'un de ces services,\n"
-"désactivez-le. Vous pouvez changer cette configuration n'importe quand, en\n"
-"redémarrant cette application !"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur web sur cette machine, que vous avez besoin de\n"
-"rendre visible depuis tout l'internet ? Si vous utilisez un serveur web\n"
-"pour seulement cette machine, vous pouvez répondre NON ici.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur de nom sur cette machine ? Si vous n'avez pas\n"
-"configuré un tel serveur pour donner des informations d'IP et de zone\n"
-"pour tout l'internet, veuillez répondre NON.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Voulez-vous permettre les connexions sécurisées entrantes (par le\n"
-"protocole ssh) ? C'est un remplacement de telnet que vous pouvez utiliser\n"
-"pour vous connecter sur une machine distante. Si vous utilisez telnet en\n"
-"ce moment, vous devriez vraiment passer ŕ ssh. telnet n'est pas encrypté\n"
-"-- par exemple des pirates peuvent voler votre mot de passe. ssh est\n"
-"encrypté et interdit les écoutes clandestines (eavesdropping)."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Voulez-vous permettre les connexions entrantes en telnet ?\n"
-"C'est trčs dangereux, comme nous l'avons expliqué dans l'écran précédent.\n"
-"Nous recommandons fortement de répondre NON ici et d'utiliser ssh ŕ\n"
-"la place de telnet.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Utilisez-vous un serveur FTP, que vous voulez visible depuis l'internet ?\n"
-"Si c'est le cas, nous recommandons fortement de ne l'utiliser que\n"
-"pour les transferts en mode anonyme. Tous les mots de passe envoyés\n"
-"par FTP peuvent ętre volés par des pirates, car FTP n'utilise pas\n"
-"non plus d'encryption pour transférer les mots de passe.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur de mail (courrier électronique) ? Si vous\n"
-"envoyez des messages avec pine, mutt ou d'autres clients mail texte,\n"
-"vous en utilisez probablement un. Sinon, vous devriez répondre NON.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Utilisez-vous un serveur POP ou IMAP ? C'est utilisé pour\n"
-"héberger des comptes mail qui ne sont pas basés sur des interfaces\n"
-"web.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Vous utilisez un noyau en version 2.2. Si votre adresse IP réseau est\n"
-"attribuée automatiquement par un ordinateur sur votre réseau (adresse\n"
-"dynamique), nous avons besoin d'autoriser cela. Est-ce le cas ?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Est-ce que l'heure de votre ordinateur est synchronisée avec un\n"
-"autre ordinateur ? La plupart du temps, c'est utilisé par des\n"
-"sociétés de taille moyenne ou grande, basées sur Unix/Linux,\n"
-"pour synchroniser les heures de connexion, etc. Si vous ne\n"
-"faites pas partie d'une telle société et n'avez pas entendu\n"
-"parler de ce problčme, vous n'avez probablement pas besoin\n"
-"de ce service."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"La configuration est terminée. Devons nous écrire ces changements sur "
-"disque ?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Échec de l'ouverture de %s : %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Échec de l'ouverture de %s en écriture : %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr "Non, je n'ai pas besoin de DHCP"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr "Oui, j'ai besoin de DHCP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr "Non, je n'ai pas besoin de NTP"
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr "Oui, j'ai besoin de NTP"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr "Ne pas sauver"
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr "Sauver et Quitter"
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-msgid "Firewall Configuration Wizard"
-msgstr "Assisatant de Configuration du Firewall"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr "Non (en bloquer l'accčs depuis le réseau)"
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr "Oui (autoriser ceci ŕ traverser le firewall)"
-
-#: ../../tinyfirewall.pm_.c:232
-msgid "Please Wait... Verifying installed packages"
-msgstr "Veuillez patientez... Vérification des paquetages installés"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-"Échec lors de l'installation des paquetages nécessaires : %s et Bastille.\n"
-"Essayez de les installer manuellement."
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordinateur réseau (client)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Serveur NFS, serveur SMB, serveur Proxy (mandataire), serveur SSH"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Bureautique"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Station de travail Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Outils pour votre Palm Pilot ou votre Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Station de travail"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Routeur"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Serveur de Nom et serveur d'Information Réseau"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programmes pour la bureautique : traitements de texte (kword, abiword), "
-"tableurs (kspread, gnumeric), visualiseur pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Outils audio : lecteurs mp3 ou midi, mixeurs, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Livres et Howto's sur Linux et le Logiciel Libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Station de travail KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimédia - Vidéo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Utilitaires pour le courrier électronique, les news, le web, le transfert de "
-"fichiers, les discussions en ligne"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Base de Données"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "Serveurs de bases de données PostgreSQL ou MySQL"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Outils pour faciliter la configuration de votre ordinateur"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimédia - Son"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilitaires"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentation"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Utilitaires console"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Serveur de courrier Postfix, serveur de news Inn"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimédia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuration"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Plus d'Environnements de Bureau (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Le K Desktop Environement, l'environnement de bureau de base avec sa "
-"collection d'outils"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Environnement graphique"
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache et Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Outils pour créer et graver des CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Station de travail bureautique"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Serveur"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programmes de graphisme comme The gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS"
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"Bibliothčques de développement C et C++, programmes et fichiers d'en-tęte"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Serveur réseau"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "E-mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Jeux"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Lecteurs et éditeurs vidéo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimédia - Graphisme"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-"Programmes de divertissement : jeux d'arcade, de plateaux, de stratégie, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Ensemble d'outils pour lire ou envoyer des courriers électronique (pine, "
-"mutt), des news (tin), et pour naviguer sur le Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Archivage, émulateurs, surveillance"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Gestion Financičre"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un environnement de bureau avec un ensemble d'applications et d'outils "
-"intuitifs"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients pour différents protocoles dont ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Passerelle internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programmes pour jouer/éditer du son et de la vidéo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Autres Environnements de Bureau"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Éditeurs, interpréteurs, utilitaires fichiers, terminaux"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programmes pour gérer votre finance, comme gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Gestionnaire d'Information Personnel"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimédia - Gravage de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Applications scientifiques"
diff --git a/perl-install/share/po/ga.po b/perl-install/share/po/ga.po
deleted file mode 100644
index 30649a12a..000000000
--- a/perl-install/share/po/ga.po
+++ /dev/null
@@ -1,11023 +0,0 @@
-# Irish translations for DrakX, the Mandrake Installer.
-# Copyright (C) 1999 Free Software Foundation, Inc.
-# Irish Linux Users Group <ilug@linux.ie>, 1999
-#
-# Credits where due:
-# Proinnsias Breathnach <breatpro@dublin.ml.com-nospam>
-# Donncha Ó'Caoimh <donncha.ocaoimh@tradesignals.com-nospam>
-# Barra Ó'Caoimh <Care of donncha.ocaoimh@tradesignals.com-nospam>
-# John McDonnell <johnmc@student.nuigalway.ie-nospam>
-# <Alastair McKinstry <mckinstry@computer.org>
-# Who've all contributed so far.
-# Proinnsias 16-Dec-1999
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 1999-12-16 10:33+0100\n"
-"Last-Translator: Proinnsias Breathnach <breatpro@dublin.ml.com>\n"
-"Language-Team: Gaeilge <ga@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Cumraigh gach cinn ar leith"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Cumraigh carta \"%s\" (%s) amhain"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Cumraíochti gach cinn iolrach"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Carta Grafach"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Roghnaigh freastalaí X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X freastalaí"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Roghnaigh freastalaí X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "X freastalaí"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "Freastalaí XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s le luadghearú crua-earraí 3D"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Freastalaí XFree %s le luasghearú crua-earraí 3D TRIALACH"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Cumraíocht XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Roghnaigh an méid cuimhne atá id' charta grafachach"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Roghnaigh cumraíocht an freastalaí"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Roghnaigh scáileán"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Scáileán"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Ráta athnuachana cothrománach"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Ráta athnuachana ingearach"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Níl aon scáileán cumraithe"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Níl aon carta grafachach cumraithe"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Níl aoin réiteach cumraithe"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"bain trial as roinnt paraiméadair a athrú"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Tharla Earráid:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Ag éalú i %d siocand"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Tharla earráid, bain trial as roinnt paraiméadair a athrú"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Réiteach"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Roghnaigh Réiteach agus an méid dath"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Carta Grafach: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Freastalaí XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Mór"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Ceart go Leor"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Mód Saineolaí"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Taispéan gach ceann"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Réiteachaí"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Leagan amach eocharchlára: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Cineál luchóg: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Gaireas luchóige: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Scáileán: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Scáileán HorizSync: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Scáileán VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Carta Grafach: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Carta Grafach: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Cuimhne grafach: %s kb\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, fuzzy, c-format
-msgid "Color depth: %s\n"
-msgstr "Scáileán VertRefresh: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Réiteachaí: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Freastalaí XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Tiománaí XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Ag ullmhú cumraíocht X-Windows"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Athraigh Scáileán"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Athraigh carta grafach"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Athraigh cumraíocht an freastalaí"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Athraigh Réiteach"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Taispeán Eolas"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Bain trial as arís"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Éalaigh"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, fuzzy, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr "Coimead an cumraíocht IP atá ann"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X ag tús"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Is féidir linn do ríomhaire a shocrú le X a thosnú i ndhiadh bootáil.\n"
-"An dteastaíonn uait go dtosnófar X nuair a aththosnítear an ríomhaire?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Éirigh as le do thoil agus Crtl-Alt-BackSpace a úsáid"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 dath (8 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 míle dath (15 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 míle dath (16 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milliún dath (24 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 billiún dath (32 giotáin)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB nó níos mó"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Gnáth VGA, 640x480 ag 60Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 ag 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Cinéal 8514, 1024x768 ag 87 Hz Idirdhuillith (gan 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 ag 87 Hz Idirdhuillithe, 800x600 ag 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "SVGA Leathnaithe, 800x600 ag 60 Hz, 640x480 ag 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA Neamh-idirdhuillithe, 1024x768 ag 60 Hz, 800x600 ag 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA d'árd minicíocht, 1024x768 ag 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Scáileán ilmhinicíocht a bhfuil in ann do 1280x1024 ag 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Scáileán ilmhinicíocht a bhfuil in ann do 1280x1024 ag 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Scáileán ilmhinicíocht a bhfuil in ann do 1280x1024 ag 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Scáileán a bhfuil in ann do 1600x1200 ag 70Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Scáileán a bhfuil in ann do 1600x1200 ag 76Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr ""
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Roghnaigh rang feistiú"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Feistiú LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO le chlár teacs"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO le Chlár Graphaice"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Bootáil as DOS/Windows (loadin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Príomhroghanna bootáil"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Ríomhchlar Tosnaithe a úsáid "
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Feistiú cód tosnaithe"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Gaireas bootáil"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr ""
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compact"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compact"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Mód fís"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr ""
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Pasfhocal"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Pasfhocal (arís)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Teorannaigh roghanna líne ordú"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "teorannaigh"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Glan /tmp nuair a thosnaigh an coráis"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr ""
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Tabhair na Méid Cuimhne as MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Aththrialaigh"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Ní mar a chéile na pasfhocail"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Scéal Tosnú"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "OS Loiceadh?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Suim"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Críochnithe"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Athraigh"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Cén sort iontráil a suimigh do"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "CO Eile (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "CO Eile (MunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "CO Eile (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Iomha"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Léamh-Scríobh"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Baolach"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Lipéad"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Gnáth"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Méid-Initrd"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "GanBhideó"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Scrios iontráil"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Níl ceadaigh an lipéad folamh ann"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Níl aon ranna agat!"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Is ann cheana don ainm úsáideora seo"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Fuair %s %s comhéadan"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "An bhfuil ceann eile agat?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "An bhfuil comhéadan %s agat?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Níl"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Tá"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Leámh an t-eolais crua-earra"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Ag feistáil tiomanaí do %s, carta %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modíl %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr ""
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Cumraigh roghanna"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Roghachais modúil:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Tá an pasfhocal seo ro-shimplí"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr ""
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Is ann cheana don ainm úsáideora seo"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Suimigh úsáideoir"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr ""
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Fíor ainm"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Ainm úsáideora"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Blaosc"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Dealbh"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Uath-Logann"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Is féidir linn do ríomhaire a shocrú le X a thosnú i ndhiadh bootáil.\n"
-"An dteastaíonn uait go dtosnófar X nuair a aththosnítear an ríomhaire?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Roghnagih an úsáidoer gneás:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Roghnaigh an Bainistéoir Fhuinneoga a úsásd:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr ""
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Gach Rud"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Suimigh úsáideoir"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Socraithe"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "Ag Tosnaigh CUPS"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cealaigh"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Bocht"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr ""
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Árd"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Árd"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranóid"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Roghnaigh liebhéal slándáil"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Roghnaigh liebhéal slándáil"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Roghnaigh cumraíocht an freastalaí"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-# FIXME
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Fáile go GRUB, an roghnóir Choráis "
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr ""
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr ""
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Deasc"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Clár Tosnú"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr ""
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Cumraíocht Stíl Tosnú"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/C_omhad"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Comhad/_Ealu"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>E"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Scáileán Stíl Nua"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Scáileán Tradisiúnta"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Monatóir Tradisiúnta Gtk+"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Tosnaigh Aurora "
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Mód Lilo/Grub"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Mód Yaboot"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Cumraigh"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Mód Coras"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr ""
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr ""
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Ceart go Leor"
-
-#: ../../bootlook.pm_.c:229
-#, fuzzy, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Earráid ag oscailt %s do scríobh: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d noiméaid"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 noiméad"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d siocand"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Ní féidir liom rann eile a cur isteach"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Fraince"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belgáiris"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Gearmáinis"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Greicís"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Ioruais"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Amharc"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Iodálais"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "srathach"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Léigh go curamach"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Earráid"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Draíodoir"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Roghnaigh gníomh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tá rann mór FAT amháin agat.\n"
-"Molaim dhuit an rann sin a athmhéadú ar dtús\n"
-"(roghnaigh an rann agus brú ar \"Athméidigh\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Sonraí"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Malairte"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Folamh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Eile"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Cineál córais-comhadlanna"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Cruthaigh"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Cineál"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Scríos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Roghnaigh gníomh"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Leasú"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Lean ar aghaidh ar aon nós?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Éalaigh gan sabháil"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Éalaigh gan an clár-ranna a scríobh?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Glan gach ceann"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Eolas R-Phost"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Tá na ranna príofa uilig úsáidthe"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ní féidir liom rann eile a cur isteach"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Le breis ranna a bheith agat, dealaigh ceann amháin le bheith in ann "
-"rannsínithe a cruthú"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Scriobh clár-ranna"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Scriobh clár-ranna"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Scriobh clár-ranna"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Roghnaigh Comhad"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Níl an méid céanna ar an rann cúltaca\n"
-"Lean ar aghaidh ar aon nós?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Rabhadh"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Cur diosca flapach sa dioscthiomant\n"
-"Caillfear gach sonra ar an dhiosca seo"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Ag iarraidh an clár-ranna a tarrtháil"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Eolas R-Phost"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Roghnachais"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Athméidigh"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Bog"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formáidigh"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Cur le RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Cur le LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Bain ó RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Bain ó RAID"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Athraigh RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Teascán tosasch: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Méid i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Cineál córas-comhadlanna:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Tosaíocht: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Ag formáidiú comhad 'loopback' %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Athraigh cineál ranna"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-#, fuzzy
-msgid "Which filesystem do you want?"
-msgstr "Cén rann atá uait?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Ag ríomhadh teorainn na córais-comhadlanna FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Ag athméadú"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:614
-#, fuzzy
-msgid "All data on this partition should be backed-up"
-msgstr "caillfear gach sonra ar an rann seo"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Roghnaigh an méid nua"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Méid i MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Cén diosca ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Teascán"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Cén tescán ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Ag bogadh"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Ag bogadh rann..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Roghnaigh RAID atá ann le méadú"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "nua"
-
-#: ../../diskdrake/interactive.pm_.c:714
-#, fuzzy
-msgid "Choose an existing LVM to add to"
-msgstr "Roghnaigh RAID atá ann le méadú"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "ainm LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Fíor ainm"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Roghachais modúil:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "gaireas"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "leibhéal"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "méid smután"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Cén sort rannú atá ort?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Níl mé sasta /boot a cruthú comh fada sin isteach sa diosca, (ar sorcóir > "
-"1024).\n"
-"Má tá tú ag úsáid LILO ní oibróidh sé, nó níl /boot uait muna n-úsáideann tú "
-"LILO"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Tá an rann atá roghnaithe agat don fréamh (/) suitithe i ndhiadh an 1024ú\n"
-"sorcóir ar an dhiosca, agus níl aon rann /boot agat.\n"
-"Má tá tú chun LILO a úsáid, beidh ort rann /boot a cruthú ar ball."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Scríobhfar clár diosca %s go dhiosca!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Beidh ort an ríomhaire a aththosnú sula ndéanfar an athrú"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Ag formáidiú"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Ag formáidiú comhad 'loopback' %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Ag formáidiú rann %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "teip ar 'mkraid'"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Cruthaigh rann nua"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Réiteachaí: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Gaireas: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Litir Dioscthiománt DOS: %s (buile faoi thuraim)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Cineál: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ainm: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Tús: teascán %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Méid: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s teascáin"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Sorcóir %d go sorcóir %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formáidithe\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Neamhformáidithe\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Rann tosaithe de ghnáth\n"
-" (do thosnú MS-DOS, ní lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Leibhéal %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Méid smután %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Dioscaí RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Méid: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Céimseasamh: %s sorcóir, %s ceann, %s teascán\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-#, fuzzy
-msgid "Info: "
-msgstr "Eolas"
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Dioscaí LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Cinéal tabla rann: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "ar bhús %d, id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Roghnachais: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Cineál córas-comhadlanna:"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Ní mar a chéile na pasfhocail"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Athraigh cineál ranna"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "freastalaí DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "Formáidiú %s de %s teipithe"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "níl a fhios agam conas %s a formáidiú go %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simplí"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "Freastalaí"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Earráid ag oscailt %s do scríobh: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Tharla earráid - ní fhuaireadh aon gaireas ar a bhféadfaí córais-comhadlanna "
-"nua a cruthu. Ba chóir duit do chuid crua-earraí a seiceáil le cúis an fadhb "
-"a aimsiú"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Níl aon ranna agat!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr ""
-
-#: ../../help.pm_.c:547
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Earráid ag léamh comhad %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Níl aon ranna malairte agat\n"
-"\n"
-"x1Lean ar aghaidh ar aon nós?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Úsáid spás saor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:102
-#, fuzzy
-msgid "There is no existing partition to use"
-msgstr "Ag iarraidh an clár-ranna a tarrtháil"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:112
-#, fuzzy
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Cén rann a bhfuil tú ag iarraidh úsáid mar rann fréamhach"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Roghnaigh an méid nua"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Méid i MB do Rhann Fréamhach:"
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Méid i MB do rhann malairte:"
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:130
-#, fuzzy
-msgid "Computing Windows filesystem bounds"
-msgstr "Ag ríomhadh teorainn na córais-comhadlanna FAT"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "rann %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Theip ar uathathmhéadú FAT: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Glan diosca ina iomlán"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Dealaigh Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Úsáid fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:226
-#, fuzzy
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Níl aon ranna agat!"
-
-#: ../../install_interactive.pm_.c:242
-#, fuzzy
-msgid "I can't find any room for installing"
-msgstr "Ní féidir liom rann eile a cur isteach"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Theip ar rannú: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Ag tosnú suas an ghréasán"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Ag dúnadh síos an ghreasán"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ta earraid ann, níl a fhios agam conas é a cheartú.\n"
-"Lean ort, ar do phriacal féin."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Fáilte go %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Níl dioscthiománt flapach ar fáil"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Ag tosnú ar céim `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Rann Feistiú"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Méid iomlán: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Pacáiste mícheart"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ainm: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Leagan: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Méid: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Tábhacht: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Feistiú"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Sabháil ar dhiosca flapach"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Eirigh as Feistiú"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Ag Feistiú"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Ag meastú"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Am fagtha "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Fan tamall, ag ullmhaigh feistiú"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d pacáistí"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Ag feistiál pacáiste %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aontaigh"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Tarrtháil"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Lean ar aghaidh ar aon nós?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Tharla earráid"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Ceadúnas"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Eocharclár"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Cén leagan amach atá ar d'eocharchlársa"
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Cén rann feistiú atá uait?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Feistiúi/Uadgrádaigh"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Feistigh nó uasgrádaigh ?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Molta"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Saineolaí"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Uasgrádaigh"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Gaireas luchóige"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Cumraigh Cártaí PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Ag cumraigh IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "níl aon ranna saora ann"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:357
-#, fuzzy, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ni féidir liom an tábla rainn a léamh, tá máchaillí ann :(\n"
-"Leanfaidh mé orm ag cealú droch rainn"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"Theip ar DiskDrake an tabla rainn a léamh i gceart.\n"
-"Lean ort, ar do phriacal féin!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Rann Fréamhach"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Céard é an rann fréamhach (/) ded' chóras?"
-
-#: ../../install_steps_interactive.pm_.c:411
-#, fuzzy
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Beidh ort an ríomhaire a aththosnú sula ndéanfar an athrú"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Ag formáidiú ranna"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nil dothain spas malartu chun insealbhu, chuir leis an spas"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Ag curdach do na pacáistí atá ar fáil"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Ag cúrdach pacáistí le húasgrádú"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Críochnaithe (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Íosta (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Molta (%d MB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Aisig ó dhiosca flapach"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Aisig ó dhiosca flapach"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Sabháil ar dhiosca flapach"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Roghnaigh pacáistí a feistiú ..."
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Fan tamall"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Ag Ullmhaigh feistiú"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Ag feisteáil pacáiste %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Cumraíocht Iar-feistú"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Cén ceann do chrois ama"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "An bhfuil an clog cruaearrach ar GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "Freastalaí NTP"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Scrios Freastalaí CUPS"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Gan Printéir"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "An bhfuil ceann eile agat?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Coimriú"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Luchóg"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Am Críos"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Printéir"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Carta ISDN"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Carta Fuaim"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Carta Telefís"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Chomaid Áitiúl"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Socraigh pasfhocal root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Gan pasfhocal"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Deimniú"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "Deimniú LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "Freastalaí LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "Deimniú NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Fearannas NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Freastalaí NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Cead dioscthiománt flapach"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Dara dioscthiomáint flapach"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Scipeáil"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Brón orm, níl aon dioscthiománt flapach ar fáil"
-
-#: ../../install_steps_interactive.pm_.c:1212
-#, fuzzy
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Cur isteach diosca sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Ag Cruthaigh diosca thosnaithe"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Ag Ullmhaigh ríomhchlar thosnaithe"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-#, fuzzy
-msgid "Do you want to use aboot?"
-msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Feistigh cód tosnaithe"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Cur isteach diosca folamh sa dioscthiomant %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1354
-#, fuzzy
-msgid "Generate auto install floppy"
-msgstr "Cruthaigh flapach bootáil"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Athlódaigh"
-
-#: ../../install_steps_interactive.pm_.c:1364
-#, fuzzy
-msgid "Save packages selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../install_steps_newt.pm_.c:22
-#, fuzzy, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Feistiú Linux-Mandrake %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu ar iarraidh"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Roghnaigh gníomh"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Réamhioaíocht"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Fan tamall"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Eolas"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr ""
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Droch rogha, aththrialaigh\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Do rogha? (gnás %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Do rogha? (gnás %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Roghnachais: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Do rogha? (gnás %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Ceichís (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Gearmáinis"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Spáinis"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Fionlainnais"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francaigh"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Ioruais"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polainnais"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruislís"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr ""
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Méarchlár UK"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Meárchlár US"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgáiris"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Bulgáiris"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bulgáiris"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Belarúisis"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Eilvéis (Stíl Ghearmánais)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Eilvéis (Stíl Francaigh)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Ceichís (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Gearmáinis (gach meachlár marbh)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danmharghais"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (Meiriceá)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Ioruais)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Meiriceá)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Eastóinis"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Greicís"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Ungárais"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Cróitis"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr ""
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr ""
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Iodálais"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Seápainis (106 eochair)"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Méarchlár Chóiris"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Mheirceá Theas"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Áit"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr ""
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr ""
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Rúisis (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Rúisis (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Rúisis (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slóbaicis (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slóbaicis (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Table"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr ""
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Meárchlár US"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr ""
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Mearchlár US (idirnaisiúnta)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr ""
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Luchóg - Sun"
-
-#: ../../mouse.pm_.c:32
-#, fuzzy
-msgid "Logitech MouseMan+"
-msgstr "Luchóg Bus Logitech"
-
-#: ../../mouse.pm_.c:33
-#, fuzzy
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Mouse Gnáth (PS/2)"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 Cnaipe"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Luchóg 2-cnaipe Loiceadh"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Gnáth"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Rothar"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "srathach"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Luchóg Gnáth 3-cnaipe"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Luchóg MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Luchóg Logitech CC"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Luchóg Logitech (srathach, séan cinéal C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 cnaipí"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 cnaipí"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "Ar bith"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Luchóg ar bith"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Teastáil an luchóg, le do thoil"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr ""
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "BOG DO ROTHAR!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Fionnlainnis"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "úsáid dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "úsáid pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "úsáid pppoe"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Roghnaigh an cláréadan ghréasán"
-
-#: ../../network/ethernet.pm_.c:93
-#, fuzzy
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ní fuaireathas cárta gréasánú"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Cumraigh gréasánú"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "ÓstAinm"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Draíodóir Cumraíocht Gréasánú"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Móideam ISDN seantrach"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Carta ISDN inmheánamach"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "Éirigh as cumraíocht"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Cumraigh ISDN"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Eorap (EDS11)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Cén cinéal c atá uait?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Níl fhíos agam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA/ PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Tobscoir"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Lean"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Cén sort carta ISDN atá uait?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-
-#: ../../network/modem.pm_.c:39
-#, fuzzy
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Roghanna 'Dialup'"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ainm Nasc"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Uimhir fón"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Ainm Login:"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Script-bhunaithe"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Teirminéal-bhunaithe"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ainm Fearannas"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-#, fuzzy
-msgid "First DNS Server (optional)"
-msgstr "Cead Freastalaí DNS"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-#, fuzzy
-msgid "Second DNS Server (optional)"
-msgstr "Dara Freastalaí DNS"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:34
-#, fuzzy
-msgid "You are currently connected to internet."
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:37
-#, fuzzy
-msgid "You are not currently connected to Internet."
-msgstr "Cén diosca ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Lean"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Cumraigh gréasánú"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:167
-#, fuzzy
-msgid "Choose the profile to configure"
-msgstr "Roghnagih an úsáidoer gneás:"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy
-msgid "Normal modem connection"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, fuzzy
-msgid "ISDN connection"
-msgstr "Cumraigh ISDN"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Nasc LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy, c-format
-msgid "detected on interface %s"
-msgstr "Cláréadan Gréasán"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Nasc LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Nasc Printéir"
-
-#: ../../network/netconnect.pm_.c:233
-#, fuzzy
-msgid "Do you want to start the connection at boot?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Ag cumrú gléas gréasánú %s"
-
-#: ../../network/network.pm_.c:307
-#, fuzzy, c-format
-msgid " (driver %s)"
-msgstr " (tiomáint $module)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Seoladh IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr ""
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Uath-IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "freastalaí DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gaireas na hInneal Geata"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Cumraigh seach-freastalaí"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Seach-HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Seach-FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr ""
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../network/tools.pm_.c:40
-#, fuzzy
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-#, fuzzy
-msgid "Testing your connection..."
-msgstr "Cumraigh nasc ghréasán"
-
-#: ../../network/tools.pm_.c:50
-#, fuzzy
-msgid "The system is now connected to Internet."
-msgstr "Cén diosca ag a dteastaíonn uait é a bhogadh?"
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Cumraíocht Idirlíon."
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ na Carta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Cuimhne Charta (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "I/A Carta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "I/A_0 Carta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "I/A_1 Carta"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-#, fuzzy
-msgid "Your personal phone number"
-msgstr "Uimhir fón"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Uimhir fón"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-#, fuzzy
-msgid "Provider dns 1 (optional)"
-msgstr "Roghanna Printéir"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-#, fuzzy
-msgid "Provider dns 2 (optional)"
-msgstr "Roghanna Printéir"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Roghnaigh mhéarchlár"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr ""
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Athraigh cineál ranna"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Ainm Nasc"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr ""
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Pasfhocal"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr ""
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Droch comhad chúltaca"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Earráidh ag scríobh comhad %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "riachtanas"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "tábhachtach"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "an-dheas"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "deas"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "b'fhéidir"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Printéir áitiúl"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Scríos Printéir"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Scrios Freastalaí CUPS"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Scrios freastalaí lpd"
-
-#: ../../printer.pm_.c:51
-#, fuzzy
-msgid "Network printer (TCP/Socket)"
-msgstr "Printéir Gréasán (lpd)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Freastalaí Printéir"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "Gaireas Printéir (URI)"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Printéir áitiúl"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Scríos Printéir"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Earráidh ag scríobh comhad %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modíl %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP freastalaí SMP"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-#, fuzzy
-msgid " (Default)"
-msgstr "Gnáth"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:25
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "cumraíocht"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Scrios Freastalaí CUPS"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:87
-#, fuzzy
-msgid "CUPS server IP"
-msgstr "IP freastalaí SMP"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Poirt"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Cumraigh ADSL"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Gan Printéir"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Printéir áitiúl"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Pointe taca dublach %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Gaireas Printéir (URI)"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Printéir áitiúl"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Gaireas Printéir (URI)"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Ag feistiál pacáiste %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Ag feistiál pacáiste %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-msgid "Making printer port available for CUPS ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:625
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "ÓstAinm"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Roghanna Printéir SMB (Fuinneoga 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "freastalaí óstann SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP freastalaí SMP"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Comh. ainm"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupa na hOibre"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Roghanna Printéir NetWare"
-
-#: ../../printerdrake.pm_.c:802
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Freastalaí Printéir"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Roghanna Printéir NetWare"
-
-#: ../../printerdrake.pm_.c:853
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Óstainm Printéir"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Óstainm Printéir"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "Gaireas Printéir (URI)"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Ainm Printéir"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Cuntas"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Áit"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "An bhfuil seo ceart?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Nasc Printéir"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "Cén sort printéir atá ort?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Bain trial as arís"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Printéir"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Uirlisí gnáth"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Óstainm Printéir"
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1639
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Gan Printéir"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Dún"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ag dúnadh síos an ghreasán"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ag dúnadh síos an ghreasán"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Roghanna Printéir"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-msgid "Reading printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Gan Printéir"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-msgid "Refreshing printer data ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Cumraigh Printéir"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Nasc Printéir"
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Cumraigh gréasánú"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Níl aon scáileán cumraithe"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Cumraigh gréasánú"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Árd"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranóid"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Nasc Printéir"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Cén rann atá uait?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Cumraigh printéir"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Ag feistiál pacáiste %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Roghanna Printéir"
-
-#: ../../printerdrake.pm_.c:2318
-msgid "Preparing PrinterDrake ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Cumraigh printéir"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "An dteastaěonn uait printéir a chumrú?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Clódóir"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Cumraigh gréasánú"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-#, fuzzy
-msgid "Normal Mode"
-msgstr "Luchóg ar bith"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Nasc Printéir"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-msgid "Printer name, description, location"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Óstainm Printéir"
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Scríos Printéir"
-
-#: ../../printerdrake.pm_.c:2786
-#, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Printéir áitiúl"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Scríos Printéir"
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Cumraigh seach-freastalaí"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Poirt"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr ""
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr ""
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "Logann"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "Pasfhocal"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Gan pasfhocal"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Ní mar a chéile na pasfhocail"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr ""
-
-#: ../../raid.pm_.c:111
-#, fuzzy, c-format
-msgid "Can't write file %s"
-msgstr "Earráidh ag scríobh comhad %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "teip ar 'mkraid'"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr ""
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr ""
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Printéir"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Idirlíon"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mód Coras"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Scríos Printéir"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Freastalaí Printéir"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-msgid "Services"
-msgstr "Seirbishí"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "ag rith"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "ag stoppadh"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr ""
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ar Tús"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Clár Tosnú"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Teascán"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "suimiúil"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Ilmheánach"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Forbairt"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Cláréadan Gréasán"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "freastalaí óstann SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Cluichí"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Saineolaí"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "sainordaitheach"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Ag feistiál pacáiste %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ni féidir liom an tábla rainn a léamh, tá máchaillí ann :(\n"
-"Leanfaidh mé orm ag cealú droch rainn"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Earráid"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Cumraíocht Iar-feistú"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Cumraíocht Stíl Tosnú"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Comhghairdeas!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Feistiú"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Suimigh úsáideoir"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Ag formáidiú comhad 'loopback' %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Roghnú Grúpa Pacáistí"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Scrios ciú"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Dealaigh Windows(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Ainm úsáideora"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Teastáil an luchóg, le do thoil"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Aththrialaigh"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Aththrialaigh"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Gan pasfhocal"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Nasc LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Nasc Printéir"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Cén leagan amach atá ar d'eocharchlársa"
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Roghnaigh rann le do thoil"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Teastáil an luchóg, le do thoil"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Cláréadan Gréasán"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Ainm úsáideora"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Athraigh cumraíocht an freastalaí"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Athraigh cumraíocht an freastalaí"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Fan tamall"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Rothar"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Rothar"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Roghachais modúil:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Socraigh córas chomhad"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Roghnachais"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Aisig ó dhiosca flapach"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Eile"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Feistigh córas"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Aisig ó comhad"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Aisig ó comhad"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Socraithe"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-#, fuzzy
-msgid "Help"
-msgstr "/C_úidiú"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Clár Tosnú"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Aisig ó comhad"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Teacs"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Roghnaigh pacáistí ..."
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Roghnaight do theangam le do thoil."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Droch comhad chúltaca"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Sabháil i gcomhad"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Teastáil an luchóg, le do thoil"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-msgid "Please check if you want to include install boot on your CD."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "cumraíocht"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Éirigh as cumraíocht"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Socraigh córas chomhad"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "Teip ag cuardach %s"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Críochnithe"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formadaigh flapach"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Ag Ullmhaigh feistiú"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "teorannaigh"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formáidigh ranna"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Éirigh as cumraíocht"
-
-#: ../../standalone/drakfont_.c:570
-msgid "Font List"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Roghnaigh na ranna atá le formáidiú"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Oifig"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Tobscoir"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Printéir"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Feistigh córas"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Roghnaigh Comhad"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Scríos Printéir"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Scéal Tosnú"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Níl aon gaireas ghreasán san do chorás!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Feistiú"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Níl aon gaireas ghreasán san do chorás!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Eirigh as Feistiú"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:154
-#, fuzzy
-msgid "Internet connection sharing is now disabled."
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:180
-#, fuzzy
-msgid "Internet connection sharing is now enabled."
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:228
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "suimiúil"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Níl aon gaireas ghreasán san do chorás!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Cláréadan Gréasán"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Níl aon scáileán cumraithe"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP freastalaí SMP"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:340
-#, fuzzy
-msgid "Configuring..."
-msgstr "Ag cumraigh IDE"
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:378
-#, fuzzy, c-format
-msgid "Problems installing package %s"
-msgstr "Ag feistiál pacáiste %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Cumraíocht Gréasánú"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr ""
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-#, fuzzy
-msgid "Hostname: "
-msgstr "Ainm úsáideora"
-
-#: ../../standalone/draknet_.c:168
-#, fuzzy
-msgid "Internet access"
-msgstr "suimiúil"
-
-#: ../../standalone/draknet_.c:181
-#, fuzzy
-msgid "Type:"
-msgstr "Cineál: "
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Inneal Geata:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-#, fuzzy
-msgid "Interface:"
-msgstr "suimiúil"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr ""
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-#, fuzzy
-msgid "Configure Internet Access..."
-msgstr "Cumraigh gréasánú"
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-#, fuzzy
-msgid "LAN configuration"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Tiománaí"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "Interface"
-msgstr "Cláréadan Gréasán"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Clár Tosnú"
-
-#: ../../standalone/draknet_.c:244
-#, fuzzy
-msgid "Configure Local Area Network..."
-msgstr "Cumraigh gréasánú"
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Draíodoir..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-#, fuzzy
-msgid "Please Wait... Applying the configuration"
-msgstr "Trialaigh an cumraíocht"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Ainm Nasc"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Not connected"
-msgstr "Cumraigh ADSL"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr ""
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-#, fuzzy
-msgid "LAN Configuration"
-msgstr "cumraíocht"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr ""
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr ""
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "activate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-msgid "deactivate now"
-msgstr ""
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-#, fuzzy
-msgid "Internet connection configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/draknet_.c:588
-#, fuzzy
-msgid "Internet Connection Configuration"
-msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#: ../../standalone/draknet_.c:597
-#, fuzzy
-msgid "Connection type: "
-msgstr "Athraigh cineál ranna"
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr ""
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Inneal Geata:"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr ""
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr ""
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr ""
-
-#: ../../standalone/drakxconf_.c:47
-#, fuzzy
-msgid "Control Center"
-msgstr "Bainteach le hIdirlíon"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "Canada (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Eorap"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Athlódaigh"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Eorap"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "srathach"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Cén leagan amach atá ar d'eocharchlársa"
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Athraigh CD-ROM"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr "logdrake"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Comhad/_Nua"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Comhad/_Oscail"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>O"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Comhad/_Sábháil"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>S"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Comhad/Sábháil _Mar"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "/Comhad/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Roghanna"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Roghnachais/Teastáil"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/C_úidiú"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Cúidiú/_Faoi..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Ainm úsáideora"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "scéalaí"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr "faigh"
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr "Roghnachais"
-
-#: ../../standalone/logdrake_.c:191
-msgid "matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr "Tóg comhad"
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr "Feilire"
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Ag Parsáil an comhad %s, fan tamall"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Cumraigh Lilo/Grub"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "scáil"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "suimiúil"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Ag formáidiú"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Cumraigh Idirlíon"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Sábháil mar..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Cén cinéal luchóg atá agat?"
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Roghnaigh carta grafachach"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Gaireas bootáil"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "ag leámh cumraíocht"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "ag leámh cumraíocht"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Roghnaigh do theanga"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Roghnaigh rang feistiú"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr ""
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Cumraigh luchóg"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Roghnaigh mhéarchlár"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Slándáil"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Socraigh córas chomhad"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formáidigh ranna"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Roghnaigh pacáistí ..."
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Feistigh córas"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Suimigh úsáideoir"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Cumraigh gréasánú"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Cumraigh seirbhisí"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Feistigh cód tosnaithe"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Cruthaigh an diosca "
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Cumraigh X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Feistigh córas"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Eirigh as Feistiú"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Earráid ag oscailt %s do scríobh: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "ag leámh cumraíocht"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Fan tamall, ag ullmhaigh feistiú"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Greasan/FTP"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "Printéir Gréasán (lpd)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Oifig"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Stáisiún Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Stáisiún Oibre"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Stáisiún KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Video"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Sound"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "Áit"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Stáisiún Idirlíon"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Stáisiún Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "cumraíocht"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Stáisiún Oibre"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Freastalaí"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "Cláréadan Gréasán"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Post/Nuacht/Groupware"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Stáisiún Cluichí"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - Graphics"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Deasc Graphaicí Eile"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia - CD Burning"
-msgstr "Ilmheánach"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Scientific Workstation"
-msgstr "Stáisiún Oibre"
-
-#, fuzzy
-#~ msgid "About"
-#~ msgstr "Tobscoir"
-
-#~ msgid "$f-$g %s)"
-#~ msgstr "$f-$g %s)"
-
-#~ msgid "None"
-#~ msgstr "Ar bith"
-
-#, fuzzy
-#~ msgid "Choose a default printer!"
-#~ msgstr "Roghnagih an úsáidoer gneás:"
-
-#, fuzzy
-#~ msgid "Apply/Re-read printers"
-#~ msgstr "Scríos Printéir"
-
-#~ msgid "Low"
-#~ msgstr "Bun"
-
-#~ msgid "Medium"
-#~ msgstr "Gnáth"
-
-#, fuzzy
-#~ msgid "mount failed"
-#~ msgstr "teip ar 'mkraid'"
-
-#, fuzzy
-#~ msgid "Art and Multimedia"
-#~ msgstr "Ilmheánach"
-
-#~ msgid "Boot mode"
-#~ msgstr "Mód Bootáil"
-
-#, fuzzy
-#~ msgid "Export"
-#~ msgstr "Saineolaí"
-
-#, fuzzy
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#, fuzzy
-#~ msgid "Detected %s, do you want to set it up?"
-#~ msgstr "Cén diosca ag a dteastaíonn uait é a bhogadh?"
-
-#, fuzzy
-#~ msgid "Please choose the printer you want to set up."
-#~ msgstr "Cén cinéal luchóg atá agat?"
-
-#, fuzzy
-#~ msgid "Infos"
-#~ msgstr "Eolas"
-
-#, fuzzy
-#~ msgid "Windows Importation"
-#~ msgstr "Stáisiún Gnome"
-
-#~ msgid "authentification"
-#~ msgstr "údarú"
-
-#~ msgid "user"
-#~ msgstr "úsáideoir"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please choose the desired printer/printer port.\n"
-#~ "\n"
-#~ msgstr "Cén cinéal luchóg atá agat?"
-
-#, fuzzy
-#~ msgid "\\@quit"
-#~ msgstr "Éalaigh"
-
-#~ msgid "Active"
-#~ msgstr "Gníomhach"
-
-#, fuzzy
-#~ msgid "No X"
-#~ msgstr "Níl"
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Gaireas na Printéir Áitiúl"
-
-#~ msgid "Printer Device"
-#~ msgstr "Gaireas Printéir"
-
-#, fuzzy
-#~ msgid "Printer(s) on remote CUPS server(s)"
-#~ msgstr "Scrios Freastalaí CUPS"
-
-#, fuzzy
-#~ msgid " Linux "
-#~ msgstr "Linux"
-
-#, fuzzy
-#~ msgid " System "
-#~ msgstr "Mód Coras"
-
-#, fuzzy
-#~ msgid " Other "
-#~ msgstr "Eile"
-
-#, fuzzy
-#~ msgid "please choose your CD space"
-#~ msgstr "Cén leagan amach atá ar d'eocharchlársa"
-
-#, fuzzy
-#~ msgid " Please check if you are using CDRW media"
-#~ msgstr "Roghnaigh rann le do thoil"
-
-#, fuzzy
-#~ msgid " Tape "
-#~ msgstr "Cineál: "
-
-#, fuzzy
-#~ msgid " Use .backupignore files"
-#~ msgstr "Droch comhad chúltaca"
-
-#, fuzzy
-#~ msgid "Configure it"
-#~ msgstr "Cumraigh X"
-
-#, fuzzy
-#~ msgid "on Tape Device"
-#~ msgstr "Gaireas Printéir"
-
-#, fuzzy
-#~ msgid " Cancel "
-#~ msgstr "Cealaigh"
-
-#, fuzzy
-#~ msgid " Ok "
-#~ msgstr "Ceart go Leor"
-
-#, fuzzy
-#~ msgid "close"
-#~ msgstr "Dún"
-
-#, fuzzy
-#~ msgid "toto"
-#~ msgstr "toot"
-
-#~ msgid "Starting your connection..."
-#~ msgstr "Nasc Printéir"
-
-#, fuzzy
-#~ msgid "Closing your connection..."
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#, fuzzy
-#~ msgid "The system is now disconnected."
-#~ msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#~ msgid "Total size: "
-#~ msgstr "Méid iomlán: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Fan tamall, "
-
-#~ msgid "Total time "
-#~ msgstr "Am iomlán "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "Bain úsáid as an cumraíocht X11 atá ann?"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid "New"
-#~ msgstr "Nua"
-
-#, fuzzy
-#~ msgid "Remote"
-#~ msgstr "Scríos"
-
-#, fuzzy
-#~ msgid ""
-#~ "Please click on a button above\n"
-#~ "\n"
-#~ "Or use \"New\""
-#~ msgstr "Roghnaigh rann le do thoil"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Débhríoch (%s), bí níos cruinn\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (gnás %s)"
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "Do rogha? (gnás %s úsáid `none' do ceann ar bith) "
-
-#, fuzzy
-#~ msgid "Do you want to restart the network"
-#~ msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#, fuzzy
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "An bhfuil tú ag iarraidh an cumraíocht a thrial?"
-
-#~ msgid "Default Runlevel"
-#~ msgstr "Rithléibheal Loiceadh"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Scríobh /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formáidigh gach ceann"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "I ndhiadh na rann ar fad formáidiú,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "caillfear gach sonra ar na ranna"
-
-#~ msgid "Error reading file $f"
-#~ msgstr "Earráid ag léamh comhad $f"
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Ceichis (FIXME)"
-
-#, fuzzy
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#~ msgid "Choose"
-#~ msgstr "Rogha"
-
-#~ msgid "NetWare"
-#~ msgstr "NetWare"
-
-#~ msgid "Remote queue"
-#~ msgstr "Scrios ciú"
-
-#~ msgid "Paper Size"
-#~ msgstr "Méid Páipéir"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Roghanna tiománaí Uniprint"
-
-#~ msgid "Name of queue"
-#~ msgstr "Ainm ciú"
-
-#, fuzzy
-#~ msgid "Disable"
-#~ msgstr "Table"
-
-#, fuzzy
-#~ msgid "Enable"
-#~ msgstr "Table"
-
-#, fuzzy
-#~ msgid "Network Monitoring"
-#~ msgstr "Cumraíocht Gréasánú"
-
-#, fuzzy
-#~ msgid "Connecting to Internet "
-#~ msgstr "Bainteach le hIdirlíon"
-
-#~ msgid "Disconnecting from Internet "
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet failed."
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Disconnection from Internet complete."
-#~ msgstr "Bainteach le hIdirlíon"
-
-#~ msgid "yellow pages"
-#~ msgstr "leathanaigh buí"
-
-#, fuzzy
-#~ msgid "Light configuration"
-#~ msgstr "Cumraigh ADSL"
-
-#, fuzzy
-#~ msgid "Selected size %d%s"
-#~ msgstr "Roghnaigh Comhad"
-
-#, fuzzy
-#~ msgid "Opening your connection..."
-#~ msgstr "Cumraigh nasc ghréasán"
-
-#~ msgid "Configure..."
-#~ msgstr "Cumraigh..."
-
-#, fuzzy
-#~ msgid "Configuration de Lilo/Grub"
-#~ msgstr "cumraíocht"
-
-#, fuzzy
-#~ msgid "Boot style configuration"
-#~ msgstr "Trialaigh an cumraíocht"
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Cumraigh LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Cruthaigh flapach bootáil"
-
-#~ msgid "Choice"
-#~ msgstr "Rogha"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Eile"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Ceisteanna eile"
-
-#~ msgid "First DNS Server"
-#~ msgstr "Cead Freastalaí DNS"
-
-#~ msgid "Second DNS Server"
-#~ msgstr "Dara Freastalaí DNS"
-
-#, fuzzy
-#~ msgid "using module"
-#~ msgstr "Luchóg ar bith"
-
-#, fuzzy
-#~ msgid "Development, Database"
-#~ msgstr "Forbairt"
-
-#, fuzzy
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "Cén tescán ag a dteastaíonn uait é a bhogadh?"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "Déan iarracht móideam a aimsiú?"
-
-#, fuzzy
-#~ msgid "Configure local network"
-#~ msgstr "Cumraigh gréasánú"
-
-#, fuzzy
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Nasc na hIdirlíon agus cumraíocht"
-
-#, fuzzy
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr "Tá gréasánú lóganta cumraithe cheana féin. An dteastaíonn uait:"
-
-#, fuzzy
-#~ msgid "Reconfigure using wizard..."
-#~ msgstr "Cumraigh Cártaí PCMCIA"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Internet Tools"
-#~ msgstr "Uirlisí Idirlíon"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Forbairt C/C++"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Cumraigh crios ama"
-
-#, fuzzy
-#~ msgid "Network adaptater 1 (eth0):"
-#~ msgstr "Printéir Gréasán (lpd)"
-
-#, fuzzy
-#~ msgid "Enable num lock at startup"
-#~ msgstr "X ag tús"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Pasfhocal (arís)"
-
-#~ msgid "Gateway device:"
-#~ msgstr "Gaireas na hInneal Geata:"
-
-#~ msgid "default"
-#~ msgstr "gnáth"
-
-#, fuzzy
-#~ msgid "What is your system used for?"
-#~ msgstr "Cén ceann do chrois ama"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Úsáid diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Socraithe"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Bain úsáid as scáilcomhad"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Bain úsáid as pasfhocail MD5"
-
-#~ msgid "Search"
-#~ msgstr "Cuardaigh"
-
-#~ msgid "Package"
-#~ msgstr "Pacáiste"
-
-#~ msgid "Tree"
-#~ msgstr "Crann"
-
-#~ msgid "Category"
-#~ msgstr "Saghas"
-
-#~ msgid "Installed packages"
-#~ msgstr "Pacáistí feistiú"
-
-#~ msgid "Available packages"
-#~ msgstr "Pacáistí le fáil"
-
-#~ msgid "Find Package"
-#~ msgstr "Cuardaigh Pacáiste"
-
-#~ msgid "Regexp"
-#~ msgstr "Regexp"
-
-#~ msgid "Directory"
-#~ msgstr "Eolaire"
-
-#~ msgid "Other countries"
-#~ msgstr "Tír Eile"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "móideim alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "móideim ECI"
-
-#~ msgid "don't use pppoe"
-#~ msgstr "ná úsáid pppoe"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (tábhachtach)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (an-dheas)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (deas)"
-
-#~ msgid "Czech"
-#~ msgstr "Ceichís"
-
-#~ msgid "Reconfigure local network"
-#~ msgstr "Athchumraigh an gréasánú áitiúl"
-
-#, fuzzy
-#~ msgid "Connect to Internet with a normal modem"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Connect to Internet using ISDN"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Connect to Internet using DSL (or ADSL)"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#, fuzzy
-#~ msgid "Connect to Internet using Cable"
-#~ msgstr "Bainteach le hIdirlíon"
-
-#~ msgid "Automatic resolutions"
-#~ msgstr "Uath-Réiteach"
-
-#~ msgid "Automatical resolutions search"
-#~ msgstr "Uath-cuardaigh réiteach"
-
-#~ msgid "Install/Rescue"
-#~ msgstr "Feistiú/Tarrtháil"
-
-#~ msgid "Rescue"
-#~ msgstr "Tarrtháil"
-
-#~ msgid "Apple ADB Mouse"
-#~ msgstr "Luchóg ADB Apple"
-
-#~ msgid "Apple ADB Mouse (2 Buttons)"
-#~ msgstr "Luchóg ADB Apple (2 Cnaipí)"
-
-#~ msgid "Apple ADB Mouse (3+ Buttons)"
-#~ msgstr "Luchóg Apple ADB (3+ Cnaipí)"
-
-#~ msgid "Apple USB Mouse"
-#~ msgstr "Luchóg USB Apple"
-
-#~ msgid "Apple USB Mouse (2 Buttons)"
-#~ msgstr "Luchóg USB Apple (2 Cnaipí)"
-
-#~ msgid "Apple USB Mouse (3+ Buttons)"
-#~ msgstr "Luchóg USB Apple (3+ Cnaipí)"
-
-#~ msgid "Generic Mouse (PS/2)"
-#~ msgstr "Mouse Gnáth (PS/2)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (ps/2)"
-#~ msgstr "Logitech MouseMan/FirstMouse (ps/2)"
-
-#~ msgid "ASCII MieMouse (PS/2)"
-#~ msgstr "ASCII MieMouse (PS/2)"
-
-#~ msgid "Genius NetMouse Pro (PS/2)"
-#~ msgstr "Genius NetMouse Pro (PS/2)"
-
-#~ msgid "ATI Bus Mouse"
-#~ msgstr "Luchóg Bus ATI"
-
-#~ msgid "Microsoft Bus Mouse"
-#~ msgstr "Luchóg Bus Microsoft"
-
-#~ msgid "USB Mouse (3 buttons or more)"
-#~ msgstr "Luchóg USB (3 cnaipí nó níos mó)"
-
-#~ msgid "Microsoft Rev 2.1A or higher (serial)"
-#~ msgstr "Microsoft Rev 2.1A nó barr (srathach)"
-
-#~ msgid "Logitech MouseMan+/FirstMouse+ (serial)"
-#~ msgstr "Logitech MouseMan+/FirstMouse+ (srathach)"
-
-#~ msgid "ASCII MieMouse (serial)"
-#~ msgstr "ASCII MieMouse (srathach)"
-
-#~ msgid "Genius NetMouse (serial)"
-#~ msgstr "Genius NetMouse (srathach)"
-
-#~ msgid "Microsoft IntelliMouse (serial)"
-#~ msgstr "Microsoft IntelliMouse (srathach)"
-
-#~ msgid "Logitech MouseMan/FirstMouse (serial)"
-#~ msgstr "Logitech MouseMan/FirstMouse (srathach)"
-
-#~ msgid "Generic Mouse (serial)"
-#~ msgstr "Luchóg de gnáth (srathach)"
-
-#~ msgid "Microsoft compatible (serial)"
-#~ msgstr "Microsoft nó comhoriúnach (srathach)"
-
-#~ msgid "Generic 3 Button Mouse (serial)"
-#~ msgstr "Luchóg 3-cnaipe de gnáth (srathach)"
-
-#~ msgid "Kensington Thinking Mouse (serial)"
-#~ msgstr "Kensington Thinking Mouse (srathach)"
-
-#~ msgid "What do you wish to do?"
-#~ msgstr "Céard a theastaíonn uait a dhéanamh?"
-
-#~ msgid "pump"
-#~ msgstr "pump"
-
-#~ msgid "dhcpxd"
-#~ msgstr "dhcpxd"
-
-#~ msgid "dhcp-client"
-#~ msgstr "dhcp-client"
-
-#~ msgid "What is the type of your mouse?"
-#~ msgstr "Cén cinéal luchóg atá agat?"
-
-#~ msgid "Cryptographic"
-#~ msgstr "Rúnscríobhach"
-
-#~ msgid "Configure LAN"
-#~ msgstr "Cumraigh LAN"
-
-#~ msgid "Show less"
-#~ msgstr "Taispéan níos lú"
-
-#~ msgid "Show more"
-#~ msgstr "Taispeán níos mo"
diff --git a/perl-install/share/po/gl.po b/perl-install/share/po/gl.po
deleted file mode 100644
index a0f63f21a..000000000
--- a/perl-install/share/po/gl.po
+++ /dev/null
@@ -1,12241 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 1999, 2000 Mandrakesoft.
-# Copyright (C) 2000 Jesús Bravo Álvarez.
-# José Manuel Cambre <asforber@asforber.com>, 1999
-# Jesús Bravo Álvarez <jba@pobox.com>, 2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2000-06-08 18:14+0200\n"
-"Last-Translator: Jesús Bravo Álvarez (mdk) <jba@pobox.com>\n"
-"Language-Team: Galician <trasno@ceu.fi.udc.es>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:243
-#, fuzzy
-msgid "Use Xinerama extension"
-msgstr "Usar detección automática"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:249
-#, fuzzy
-msgid "Multi-head configuration"
-msgstr "lendo a configuración"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Seleccione unha tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Escolla un servidor X"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "Choose a X driver"
-msgstr "Escolla un servidor X"
-
-#: ../../Xconfigurator.pm_.c:293
-#, fuzzy
-msgid "X driver"
-msgstr "Servidor X"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "żQue configuración de XFree quere usar?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
-"XFree %s. A tarxeta está soportada por XFree %s, que pode ter un mellor\n"
-"soporte en 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware con XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D por hardware"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE É EXPERIMENTAL E PODE COLGAR O SISTEMA."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s con aceleración 3D por hardware EXPERIMENTAL"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A súa tarxeta pode ter soporte de aceleración 3D por hardware, pero só con\n"
-"XFree %s, ADVIRTA QUE ESTE SOPORTE É EXPERIMENTAL E PODE COLGAR O SISTEMA.\n"
-"A súa tarxeta está soportada por XFree %s, que pode ter un mellor soporte en "
-"2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr ""
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "Configuración de XFree"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Seleccione a cantidade de memoria da tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Escolla as opcións para o servidor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Escolla o monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Os dous parámetros críticos son a taxa de actualización vertical, que\n"
-"indica a frecuencia coa que a pantalla completa é actualizada, e máis\n"
-"importante aínda é a taxa de sincronismo horizontal, que é a\n"
-"frecuencia coa que se mostran as lińas de barrido horizontal.\n"
-"\n"
-"É MOI IMPORTANTE que non especifique un tipo de monitor cun intervalo\n"
-"de frecuencias de sincronismo superior á capacidade real do seu monitor,\n"
-"xa que pode danalo.\n"
-"No caso de dúbida, escolla unha configuración conservadora."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Frecuencia de actualización horizontal"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Frecuencia de actualización vertical"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "O monitor non está configurado"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "A tarxeta gráfica aínda non está configurada"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Resolucións aínda non escollidas"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "żDesexa probar a configuración?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Aviso: probar esta tarxeta gráfica pode colgar o ordenador"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Proba da configuración"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"probe a cambiar algúns parámetros"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Ocorreu un erro:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Saíndo en %d segundos"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "żÉ esta a configuración correcta?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Ocorreu un erro, probe a cambiar algúns parámetros"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Resolución"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Escolla a resolución e a profundidade de cor"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Tarxeta gráfica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "Servidor XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Máis"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "Aceptar"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Modo experto"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Ver todo"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Resolucións"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposición do teclado: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipo de rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositivo do rato: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Frecuencia horizontal do monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Frecuencia vertical do monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Tarxeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, fuzzy, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Tarxeta gráfica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Memoria da tarxeta gráfica: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profundidade de cor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolución: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Servidor XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Controlador de XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Preparando a configuración de X-Window"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "żQué desexa facer?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Mudar o monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Mudar a tarxeta gráfica"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Mudar as opcións do servidor"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Mudar a resolución"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Mostrar información"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Probar de novo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Saír"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"żManter os cambios?\n"
-"A configuración actual é:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Lanzar X11 ó arrincar"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Pódese configurar o seu ordenador para que entre automaticamente\n"
-"en X ó arrincar. żDesexa que se execute X ó reiniciar?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Entre de novo en %s para activar os cambios"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Saia da sesión e use Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 cores (8 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil cores (15 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil cores (16 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millóns de cores (24 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 mil millóns de cores (32 bits)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-#, fuzzy
-msgid "16 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-#, fuzzy
-msgid "32 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-#, fuzzy
-msgid "64 MB or more"
-msgstr "16 MB ou máis"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "VGA estándar, 640x480 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "Compatible 8514, 1024x768 a 87 Hz entrelazado (no 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 a 87 Hz entrelazado, 800x600 a 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Super VGA estendido, 800x600 a 60 Hz, 640x480 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "SVGA non-entrelazado, 1024x768 a 60 Hz, 800x600 a 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "SVGA alta-frecuencia, 1024x768 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Monitor multi-frecuencia soportando 1280x1024 a 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor soportando 1600x1200 a 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor soportando 1600x1200 a 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Primeiro sector da partición de arranque"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Primeiro sector do disco (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "Instalación do SILO"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "żOnde quere instalar o cargador de arrinque?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "Instalación do LILO/grub"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO con menú de texto"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO con menú gráfico"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Arrincar dende DOS/Windows (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Opcións principais do cargador de arrinque"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Cargador de arrinque que usar"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Instalación do cargador de arrinque"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Dispositivo de arrinque"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (non funciona en BIOS antigas)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Compacto"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "compacto"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Modo de vídeo"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Retardo antes de arrincar a imaxe por omisión"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Contrasinal"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Contrasinal (de novo)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Restrinxir opcións da lińa de comandos"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "restrinxir"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Baleirar /tmp en cada arrinque"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Tamańo exacto de memoria se for necesario (atopáronse %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Activar perfís múltiples"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Indicar o tamańo da memoria en MB"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"A opción ``restrinxir opcións da lińa de comandos'' non ten sentido sen "
-"contrasinal"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Tente de novo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Mensaxe inicial"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "żPermitir o arrinque de CD?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "żSO por omisión?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Estas son as diferentes entradas.\n"
-"Pode engadir algunhas máis ou cambiar as que xa existen."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Engadir"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Feito"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Modificar"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "żQue tipo de entrada desexa engadir?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Outros SO (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Outros SO (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Outros SO (windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Imaxe"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Raíz"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Agregar"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Lectura-escritura"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Táboa"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Inseguro"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Etiqueta"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Por omisión"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr ""
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr ""
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Quitar entrada"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Etiqueta baleira non permitida"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm_.c:340
-#, fuzzy
-msgid "You must specify a root partition"
-msgstr "Debe ter unha partición de intercambio"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Esta etiqueta xa se está a usar"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s interfaces %s atopadas"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "żTen algunha outra?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "żTen algunha interface %s?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Non"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Si"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Mire a información sobre o hardware"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalando o controlador para a tarxeta %s %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(módulo %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "żQue controlador de %s desexa probar?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Nalgúns casos, o controlador de %s necesita información extra\n"
-"para funcionar correctamente, aínda que normalmente funcione sen ela.\n"
-"żDesexa especificar información extra para o controlador ou deixar que el\n"
-"analice o seu equipo e atope a información que necesita? Ás veces,\n"
-"analizar o equipo pode provocar que se pare, pero non debería\n"
-"causar ningún dano."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Autodetección"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Especificar as opcións"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Aquí deben ir as diferentes opcións para o módulo %s.\n"
-"As opcións son da forma Ťnome=valor nome2=valor2 ...ť.\n"
-"Por exemplo pode ter Ťio=0x300 irq=7ť"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Opcións do módulo:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Fallo o cargar o módulo %s\n"
-"żDesexa retentalo con outros parámetros?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s xa foi engadido)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Este contrasinal é demasiado simple"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Indique o nome de usuario"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "O nome de usuario (login) só debe conter letras, números, '-' e '_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Este nome de usuario xa está engadido"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Engadir usuario"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduza un usuario\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Aceptar usuario"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Nome real"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Nome de usuario"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Shell"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Icona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Login automático"
-
-#: ../../any.pm_.c:829
-#, fuzzy
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Pódese configurar o ordenador para que se autentique automaticamente\n"
-"como un usuario. Se non quere usar esta característica, prema o botón\n"
-"cancelar."
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Escolla o usuario por defecto:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Escolla o xestor de fiestras para executar:"
-
-#: ../../any.pm_.c:849
-#, fuzzy
-msgid "Please choose a language to use."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Pode escoller outras linguas que estarán dispońibles trala instalación"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Todas"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "Allow all users"
-msgstr "Engadir usuario"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Personalizado"
-
-#: ../../any.pm_.c:955
-#, fuzzy
-msgid "No sharing"
-msgstr "CUPS iniciando"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Este paquete ten que ser actualizado\n"
-"żEstá seguro de que quere deseleccionalo?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Cancelar"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Benvida ós crackers"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Pobre"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Estándar"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1039
-#, fuzzy
-msgid "Higher"
-msgstr "Alto"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoico"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Este nivel hai que usalo con coidado. Fai que o seu sistema sexa máis\n"
-"sinxelo de utilizar, pero é moi sensible: non debe usarse nunha máquina\n"
-"conectada a outras ou á Internet. Non hai contrasinais de acceso."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Os contrasinais están activados, pero o uso como ordenador de rede aínda\n"
-"non se recomenda."
-
-#: ../../any.pm_.c:1047
-#, fuzzy
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Esta é a seguridade recomendada para un ordenador usado para conectar\n"
-"á Internet como cliente. Agora hai más comprobacións de seguridade."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../any.pm_.c:1049
-#, fuzzy
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Con este nivel de seguridade, é posible usar este sistema coma servidor.\n"
-"A seguridade é agora alta dabondo para usar o sistema coma un servidor\n"
-"que acepta conexións de múltiples clientes."
-
-#: ../../any.pm_.c:1052
-#, fuzzy
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Tómanse características do nivel 4, pero agora o sistema está completamente\n"
-"pechado. As características de seguridade están ó máximo nivel."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Escola o nivel de seguridade"
-
-#: ../../any.pm_.c:1061
-#, fuzzy
-msgid "Security level"
-msgstr "Establecendo o nivel de seguridade"
-
-#: ../../any.pm_.c:1063
-#, fuzzy
-msgid "Use libsafe for servers"
-msgstr "Escolla as opcións para o servidor"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Benvido ao %s, o selector de sistema operativo!\n"
-"\n"
-"Escolla un sistema operativo na lista de enriba, ou\n"
-"agarde %d segundos para que se arrinque o sistema por defecto.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "­Benvido ao GRUB, o selector de sistemas operativos!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use as teclas %c e %c para seleccionar a entrada marcada."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Prema enter para arrincar o SO seleccionado, 'e' para editar os"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "comandos antes de arrincar, ou 'c' para a li¤a de comandos."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "A entrada marcada arrincarase automaticamente en %d segundos."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "non hai espacio dabondo en /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Escritorio"
-
-# Manter o 'ú' en iso-8859-1
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Menú Inicio"
-
-#: ../../bootloader.pm_.c:1065
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "żOnde quere instalar o cargador de arrinque?"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "axuda aínda non implementada.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Ficheiro"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Ficheiro/_Saír"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:92
-#, fuzzy
-msgid "NewStyle Monitor"
-msgstr "Monitor"
-
-#: ../../bootlook.pm_.c:93
-#, fuzzy
-msgid "Traditional Monitor"
-msgstr "Mudar o monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr ""
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr ""
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Lilo/grub mode"
-msgstr "Modo de marcación"
-
-#: ../../bootlook.pm_.c:98
-#, fuzzy
-msgid "Yaboot mode"
-msgstr "Modo de arrinque"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-#, fuzzy
-msgid "Configure"
-msgstr "Configurar as X"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr ""
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Lanzar o sistema X-Window ó iniciar"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Non, non quero login automático"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Si, quero login automático con este (usuario, escritorio)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "Aceptar"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "non se pode abrir /etc/inittab para lectura: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutos"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d segundos"
-
-#: ../../common.pm_.c:159
-#, fuzzy
-msgid "Can't make screenshots before partitioning"
-msgstr "Non é posible engadir máis particións"
-
-#: ../../common.pm_.c:166
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Pode escoller outras linguas que estarán dispońibles trala instalación"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francia"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr ""
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-#, fuzzy
-msgid "Belgium"
-msgstr "Belga"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr ""
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-#, fuzzy
-msgid "Germany"
-msgstr "Alemán"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-#, fuzzy
-msgid "Greece"
-msgstr "Grego"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-#, fuzzy
-msgid "Norway"
-msgstr "Noruegués"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-#, fuzzy
-msgid "Sweden"
-msgstr "Mirar"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr ""
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Italy"
-msgstr "Italiano"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-#, fuzzy
-msgid "Austria"
-msgstr "serie"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr ""
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Faga primeiro unha copia de seguridade dos seus datos"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "ĄLea coidadosamente!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se ten pensado usar aboot, teńa coidado de deixar un espacio libre (2048\n"
-"sectores abondan) no inicio do disco"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Erro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Axudante"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Escolla a acción"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Ten unha partición FAT grande\n"
-"(xeralmente usada por Microsoft Dos/Windows).\n"
-"Aconséllase que primeiro a redimensione\n"
-"(prema nela, e logo en \"Redimensionar\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Prema nunha partición"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalles"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-#, fuzzy
-msgid "Journalised FS"
-msgstr "mount fallou"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Intercambio"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Baleiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Outros"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Tipos de sist. de ficheiros:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Crear"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Tipo"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Use ``%s'' no seu lugar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Borrar"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Use ``Desmontar'' primeiro"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Ó mudar o tipo da partición %s, perderanse tódolos datos desta partición"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose a partition"
-msgstr "Escolla a acción"
-
-#: ../../diskdrake/interactive.pm_.c:171
-#, fuzzy
-msgid "Choose another partition"
-msgstr "Crear unha nova partición"
-
-#: ../../diskdrake/interactive.pm_.c:196
-#, fuzzy
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Mudar a modo experto"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Mudar a modo normal"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Refacer"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "żContinuar de calquera xeito?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Saír sen gardar"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "żSaír do programa sen gardar a táboa de particións?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-#, fuzzy
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "żDesexa probar a configuración?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Asignación automática"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Borrar todas"
-
-#: ../../diskdrake/interactive.pm_.c:262
-#, fuzzy
-msgid "Hard drive information"
-msgstr "Información do correo"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Tódalas particións primarias están usadas"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Non é posible engadir máis particións"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Para ter máis particións, borre unha para poder crear unha partición "
-"estendida"
-
-#: ../../diskdrake/interactive.pm_.c:295
-#, fuzzy
-msgid "Save partition table"
-msgstr "Escribir táboa de particións"
-
-#: ../../diskdrake/interactive.pm_.c:296
-#, fuzzy
-msgid "Restore partition table"
-msgstr "Táboa de particións de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Táboa de particións de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:299
-#, fuzzy
-msgid "Reload partition table"
-msgstr "Táboa de particións de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:304
-#, fuzzy
-msgid "Removable media automounting"
-msgstr "Automonta-las unidades extraíbles"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Seleccione un ficheiro"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A táboa de particións de rescate non ten\n"
-"o mesmo tamańo. żContinuar de calquera xeito?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Advertencia"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Insira un disquete na unidade\n"
-"Perderanse tódolos datos no disquete"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Tentando recuperar a táboa de particións de rescate"
-
-#: ../../diskdrake/interactive.pm_.c:352
-#, fuzzy
-msgid "Detailed information"
-msgstr "Información do correo"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Punto de montaxe"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcións"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Desprazar"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatar"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montar"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Engadir ó RAID"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Engadir ó LVM"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Desmontar"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Quitar do RAID"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Quitar do LVM"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Modificar o RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Usar para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Crear unha nova partición"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Sector inicial: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Tamańo en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Tipo de sist. de ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Punto de montaxe: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Preferencia: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-#, fuzzy
-msgid "Remove the loopback file?"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mudar o tipo de partición"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "żQué sistema de ficheiros desexa?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "żOnde desexa montar o ficheiro loopback %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "żOnde desexa montar o dispositivo %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Non se pode quitar o punto de montaxe porque esta partición estase a\n"
-"usar de loopback.\n"
-"Quite primeiro o loopback"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Calculando os límites do sistema de ficheiros FAT"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Redimensionando"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Esta partición non se pode redimensionar"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Debería facer unha copia de seguridade dos datos desta partición"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ó redimensionar a partición %s, perderanse tódolos datos desta partición"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Escoller o novo tamańo"
-
-#: ../../diskdrake/interactive.pm_.c:622
-#, fuzzy
-msgid "New size in MB: "
-msgstr "Tamańo en MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "żA que disco desexa desprazala?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sector"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "żA que sector desexa desprazala?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Desprazando"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Desprazando partición..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Escolla un dos RAID para engadirlle"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novo"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Escolla un dos LVM para engadirlle"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "żNome do LVM?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Esta partición non pode usarse para loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Nome do ficheiro loopback: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-#, fuzzy
-msgid "Give a file name"
-msgstr "Nome real"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr "O ficheiro xa está a ser usado por outro loopback, escolla outro"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "O ficheiro xa existe. żUsalo?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-#, fuzzy
-msgid "Mount options"
-msgstr "Opcións do módulo:"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "dispositivo"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "nivel"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "tamańo do bloque de datos"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Teńa coidado: esta operación é perigosa."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "żQué tipo de particionamento quere?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Desculpe, mais non se pode crear o directorio /boot tan lonxe no disco\n"
-"(nun cilindro > 1024). Se usa o LILO, non funcionará, e se non o\n"
-"usa, non necesita /boot"
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"A partición que escolleu para usar como raíz (/) está fisicamente ubicada\n"
-"despois do cilindro 1024 do disco duro, e non ten partición /boot.\n"
-"Se pensa usar o selector de SO de arrinque LILO, lembre engadir unha\n"
-"partición /boot"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Seleccionou unha partición RAID software como raíz (/).\n"
-"Non hai ningún cargador de arrinque que funcione deste xeito sen unha\n"
-"partición /boot.\n"
-"Lembre polo tanto engadir unha partición /boot"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ĄEscribirase ó disco a táboa de particións da unidade %s!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Necesitará reiniciar o equipo para que a modificación sexa tomada en conta"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Ó formatar a partición %s, perderanse tódolos datos desta partición"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatando"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatando a partición %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Hide files"
-msgstr "mkraid fallou"
-
-#: ../../diskdrake/interactive.pm_.c:984
-#, fuzzy
-msgid "Move files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:996
-#, fuzzy
-msgid "Moving files to the new partition"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Resolución: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Dispositivo: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Letra de unidade DOS: %s (aproximación)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Tipo: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Nome: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inicio: sector %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Tamańo: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectores"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindro %d a cilindro %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Non formatado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montado\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Ficheiro(s) loopback: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partición de arrinque por omisión\n"
-" (para arrincar en MS-DOS, non para lilo)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivel %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Tamańo do bloque de datos %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discos RAID %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nome do ficheiro loopback: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Tamańo: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Xeometría: %s cilindros, %s cabezas, %s sectores\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discos LVM %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipo de táboa de particións: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "no bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcións: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-#, fuzzy
-msgid "Filesystem encryption key"
-msgstr "Tipo de sist. de ficheiros: "
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Este contrasinal é demasiado simple (ten que ter polo menos %d caracteres)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-#, fuzzy
-msgid "The encryption keys do not match"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr ""
-
-#: ../../diskdrake/removable.pm_.c:47
-#, fuzzy
-msgid "Change type"
-msgstr "Mudar o tipo de partición"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-#, fuzzy
-msgid "Please click on a media"
-msgstr "Prema nunha partición"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-#, fuzzy
-msgid "Search servers"
-msgstr "Servidor DNS"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "O formato %s de %s fallou"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Descońécese o xeito de formatar %s de tipo %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr ""
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "erro desmontando %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "simple"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr ""
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "servidor"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Non pode usar JFS para particións máis pequenas que 16MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Non pode usar ReiserFS para particións máis pequenas que 32MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Os puntos de montaxe deben empezar por /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Xa existe unha partición co punto de montaxe %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Non pode usar un volume lóxico LVM para o punto de montaxe %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Este directorio debería permanecer dentro do sistema de ficheiros raíz"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Necesita un sistema de ficheiros real (ext2, reiserfs) para este punto de "
-"montaxe\n"
-
-#: ../../fsedit.pm_.c:488
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Non pode usar un volume lóxico LVM para o punto de montaxe %s"
-
-#: ../../fsedit.pm_.c:546
-#, fuzzy
-msgid "Not enough free space for auto-allocating"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Erro ó abrir %s para escritura: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ocorreu un erro - non se atopou ningún dispositivo válido para crear novos "
-"sistemas de ficheiros. Verifique o seu equipo para ver a razón deste problema"
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "ĄNon ten ningunha partición!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-
-#: ../../help.pm_.c:186
-#, fuzzy
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Agora poderá escoller que servicios quere que sexan arrincados ó inicio.\n"
-"Cando o seu rato pasa por riba dun elemento, unha pequena axuda aparecerá\n"
-"describindo o cometido do servicio.\n"
-"\n"
-"Sexa especialmente coidadoso neste paso se pretende utiliza-la súa máquina\n"
-"coma un servidor: probablemente non quererá iniciar servicios que non "
-"precisa."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Neste punto, ten que escoller onde quere instalar o sistema operativo\n"
-"Mandrake Linux no disco duro. Se está baleiro, ou se hai outro sistema\n"
-"ocupando todo o espacio dispońible, terá que particionalo. Basicamente,\n"
-"particionar un disco duro consiste en dividilo loxicamente para crear o\n"
-"espacio para instalar o seu novo sistema Mandrake Linux.\n"
-"\n"
-"\n"
-"Como os efectos do proceso de particionamento son normalmente "
-"irreversibles,\n"
-"o particionamento pode intimidar e resultar estresante para un usuario\n"
-"non experimentado.\n"
-"Este axudante simplifica o proceso. Antes de continuar, consulte o\n"
-"manual e tome o seu tempo.\n"
-"\n"
-"\n"
-"Necesita polo menos dúas particións. Unha é para o propio sistema operativo\n"
-"e a outra é para a memoria virtual (tamén chamada Intercambio ou Swap).\n"
-"\n"
-"\n"
-"Se as particións xa foron definidas (nunha instalación previa ou con outra\n"
-"ferramenta de particionamento), simplemente terá que escoller cales delas\n"
-"usar no seu sistema Linux.\n"
-"\n"
-"\n"
-"Se as particións aínda non foron definidas, terá que crealas. Para facelo,\n"
-"use o axudante dispońible enriba. Dependendo da configuración do seu disco\n"
-"duro, hai varias solucións dispońibles:\n"
-"\n"
-"* Usar a partición existente: o axudante detectou unha ou máis particións de "
-"Linux existentes no seu disco duro. Se\n"
-" quere mantelas, escolla esta opción.\n"
-"\n"
-"\n"
-"* Borrar o disco completo: Se quere borrar tódolos datos e tódalas "
-"particións existentes no disco duro e substituílas\n"
-" polo seu novo sistema Mandrake Linux, pode escoller esta opción. Teńa "
-"coidado con esta solución, xa que non poderá\n"
-" reverter o proceso despois de confirmar.\n"
-"\n"
-"\n"
-"* Usar o espacio libre na partición de Windows: se Microsoft Windows está "
-"instalado no seu disco duro e ocupa todo o espacio\n"
-" dispońible, ten que crear espacio libre para o Linux. Para facelo, pode "
-"borrar a partición de\n"
-" Microsoft Windows e os datos (mire \"Borrar o disco completo\" ou as "
-"solucións do \"Modo experto\"), ou redimensionar\n"
-" a partición de Microsoft Windows. O redimensionamento pódese realizar sen "
-"perda de datos. Esta solución é\n"
-" a recomendada se quere usar Mandrake Linux e Microsoft Windows no mesmo "
-"ordenador.\n"
-"\n"
-"\n"
-" Antes de escoller esta solución, advirta que o tamańo da súa partición de "
-"Microsoft Windows\n"
-" será máis pequeno do que é agora. Isto significa que terá menos espacio "
-"libre en Microsoft Windows para\n"
-" almacenar os seus datos ou instalar novo software.\n"
-"\n"
-"\n"
-"* Modo experto: se quere particionar manualmente o seu disco duro, pode "
-"escoller esta opción. Teńa coidado\n"
-" ó escoller esta solución. É potente pero moi perigosa. Pode perder os seus "
-"datos moi facilmente. Polo tanto,\n"
-" non a escolla a menos que saiba o que está a facer."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: ../../help.pm_.c:513
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Por favor, sexa paciente. Esta operación pode levar varios minutos."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Escolla \"Instalar\" se non hai ningunha versión previa de Mandrake Linux\n"
-"instalada ou se quere usar varios sistemas operativos.\n"
-"\n"
-"\n"
-"Escolla \"Actualizar\" se quere actualizar unha versión xa instalada de\n"
-"Mandrake Linux.\n"
-"\n"
-"\n"
-"Dependendo do seu cońecemento de GNU/Linux, pode escoller un dos seguintes\n"
-"niveis para instalar ou actualizar o seu sistema operativo Mandrake Linux:\n"
-"\n"
-"* Recomendada: se nunca instalou un sistema operativo GNU/Linux, escolla\n"
-"isto. A instalación será moi\n"
-" sinxela e apenas se lle preguntarán unhas poucas cuestións.\n"
-"\n"
-"\n"
-"* Personalizada: se ten familiaridade dabondo con GNU/Linux, pode escoller o "
-"uso principal (estación de traballo,\n"
-" servidor, desenvolvemento) do seu sistema. Terá que responder a máis "
-"cuestións que na clase de instalación\n"
-" \"Recomendada\", polo que necesitará saber como funciona GNU/Linux para "
-"escoller esta opción.\n"
-"\n"
-"\n"
-"* Experto: se ten un bo cońecemento de GNU/Linux, pode escoller esta clase "
-"de instalación. Do mesmo xeito que en\n"
-" \"Personalizada\", poderá escoller o uso principal (estación de traballo, "
-"servidor, desenvolvemento). Teńa\n"
-" moito coidado ó escoller este nivel. Vaille permitir facer unha "
-"instalación altamente personalizada.\n"
-" Responder algunhas cuestións pode ser moi difícil se non ten un bo "
-"cońecemento de GNU/Linux. Polo tanto, non\n"
-" escolla esta clase de instalación a menos que saiba o que está a facer."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Seleccione o porto correcto. Por exemplo, o porto\n"
-"COM1 en MS Windows chámase ttyS0 en GNU/Linux."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
-"Linux ou outro sistema operativo presente no seu ordenador.\n"
-"Normalmente, estes outros sitemas son detectados correctamente e "
-"instalados.\n"
-"Se non é o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
-"coidadoso na escolla dos parámetros correctos.\n"
-"\n"
-"\n"
-"Tamén pode non querer dar acceso a eses outros sitemas operativos a "
-"calquera,\n"
-"poidendo borrar as entradas correspondentes. Pero neste caso, precisará\n"
-"un disquete de arrinque para poder usalos."
-
-#: ../../help.pm_.c:722
-#, fuzzy
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Debe indicar onde desexa pońer a información\n"
-"necesaria para arrincar Linux.\n"
-"\n"
-"\n"
-"A menos que sepa exactamente o que fai, elixa sempre\n"
-"\"Primeiro sector do disco (MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-
-#: ../../help.pm_.c:784
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-
-#: ../../help.pm_.c:830
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: ../../help.pm_.c:896
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Insira un disquete formatado con FAT na unidade %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr ""
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Para usar esta selección de paquetes gardada, arrinque a instalación con "
-"``linux defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Erro lendo o ficheiro %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Algún hardware do seu ordenador necesita controladores ``propietarios''\n"
-"para funcionar. Pode atopar máis información sobre eles en: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Ten que ter unha partición raíz.\n"
-"Para iso, faga unha partición (ou prema nunha que xa exista).\n"
-"Entón escolla a acción ``Punto de montaxe'', e asócieo a `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Debe ter unha partición de intercambio"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Non dispón de partición de intercambio\n"
-"\n"
-"żDesexa continuar de calquera xeito?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-#, fuzzy
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Debe ter unha partición de intercambio"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Usar espacio libre"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Non hai espacio libre dabondo para asignar novas particións"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Usar partición existente"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Non hai ningunha partición existente para usar"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Usar a partición de Windows para loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "żQue partición desexa usar para Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Escolla os tamańos"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Tamańo da partición raíz en MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Tamańo da partición de intercambio en MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Usar o espacio libre da partición de Windows"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "żQue partición desexa redimensionar?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Calculando os límites do sistema de ficheiros de Windows"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"O redimensionador de FAT non é capaz de manexar a súa partición,\n"
-"ocorreu o seguinte erro: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"A partición de Windows está demasiado fragmentada, execute primeiro o "
-"``defrag''"
-
-#: ../../install_interactive.pm_.c:137
-#, fuzzy
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ĄAVISO!\n"
-"\n"
-"O DrakX vai agora redimensionar a partición de Windows. Teńa coidado:\n"
-"esta operación é perigosa. Se aínda non o fixo, debería executar primeiro\n"
-"o scandisk no Windows (e opcionalmente o defrag), e reiniciar a "
-"instalación.\n"
-"Tamén é aconsellable facer unha copia de seguridade dos seus datos.\n"
-"Cando estea seguro, prema Aceptar."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "żQue tamańo desexa manter para o Windows en"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "partición %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "O redimensionamento da FAT fallou: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Non hai particións FAT para redimensionar ou para usar como loopback (ou non "
-"hai espacio libre dabondo)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Borrar o disco completo"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Borrar Windows(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Ten máis dunha unidade de disco duro, żen cal delas desexa instalar linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Perderanse TODAS as particións existentes e os seus datos na unidade %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Particionamento de disco personalizado"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Usar fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Pode agora particionar %s.\n"
-"Cando remate, non esqueza gravar usando `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Non ten espacio libre dabondo na partición de Windows"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Non se pode atopar espacio para a instalación"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "O axudante de particionamento do DrakX atopou as seguintes solucións:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "O particionamento fallou: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Activando a rede"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Desactivando a rede"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Ocorreu un erro, e o programa non sabe como manexalo de\n"
-"maneira limpa. Continúe ó seu propio risco."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Punto de montaxe %s duplicado"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Algúns paquetes importantes non se instalaron correctamente.\n"
-"A unidade de cdrom ou o cdrom están defectuosos.\n"
-"Comprobe o cdrom nun ordenador xa instalado usando \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvido a %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Ningunha disqueteira dispońible"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entrando na etapa '%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"O seu sistema ten poucos recursos. Pode que teńa algún problema\n"
-"instalando Mandrake Linux. Se iso acontece, pode tentar unha instalación\n"
-"en modo texto. Para iso, prema 'F1' cando arrinque o CDROM, e escriba\n"
-"'text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Clase de instalación"
-
-#: ../../install_steps_gtk.pm_.c:162
-#, fuzzy
-msgid "Please choose one of the following classes of installation:"
-msgstr "Escolla unha das seguintes clases de instalación:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "O tamańo total dos grupos que seleccionou é aproximadamente %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Se quere instalar menos deste tamańo,\n"
-"seleccione a porcentaxe de paquetes que desexe.\n"
-"\n"
-"Unha porcentaxe baixa instalará só os paquetes máis importantes;\n"
-"unha porcentaxe dun 100%% instalará tódolos paquetes seleccionados."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Ten espacio no seu disco para unicamente o %d%% destes paquetes.\n"
-"\n"
-"Se desexa instalar menos ca isto,\n"
-"seleccione a porcentaxe de paquetes que quere instalar.\n"
-"Unha porcentaxe baixa instalará só os paquetes máis importantes;\n"
-"unha porcentaxe de %d%% instalará tódolos paquetes posibles."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Vostede poderá escollelos máis especificamente na seguinte etapa."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Porcentaxe de paquetes a instalar"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Selección dos grupos de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Selección individual de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tamańo total: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Paquete erróneo"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Nome: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Versión: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Tamańo: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Importancia: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Non pode seleccionar este paquete xa que non hai espacio dabondo para "
-"instalalo"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Vanse instalar os seguintes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Vanse eliminar os seguintes paquetes"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Non pode seleccionar/deseleccionar este paquete"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Este é un paquete obrigatorio, non se pode deseleccionar"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Non pode deseleccionar este paquete. Xa está instalado"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Este paquete ten que ser actualizado\n"
-"żEstá seguro de que quere deseleccionalo?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Non pode deseleccionar este paquete. Ten que ser actualizado"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instalar"
-
-#: ../../install_steps_gtk.pm_.c:466
-#, fuzzy
-msgid "Load/Save on floppy"
-msgstr "Gardar nun disquete"
-
-#: ../../install_steps_gtk.pm_.c:467
-#, fuzzy
-msgid "Updating package selection"
-msgstr "Gardar a selección de paquetes"
-
-#: ../../install_steps_gtk.pm_.c:472
-#, fuzzy
-msgid "Minimal install"
-msgstr "Desinstalar"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Escolla os paquetes que desexa instalar"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instalando"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Estimando"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Tempo restante "
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Por favor, agarde, preparando a instalación"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paquetes"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalando o paquete %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Aceptar"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Rexeitar"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"ĄMude o Cd-Rom!\n"
-"\n"
-"Por favor, insira o Cd-Rom etiquetado \"%s\" na unidade e prema Aceptar. Se "
-"non o ten, prema Cancelar para omitir a instalación deste Cd-Rom."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "żSeguir adiante?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Houbo un erro ó ordenar os paquetes:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Houbo un erro ó instalar os paquetes:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Ocorreu un erro"
-
-#: ../../install_steps_interactive.pm_.c:85
-#, fuzzy
-msgid "Do you really want to leave the installation?"
-msgstr "żDesexa reiniciar a rede?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Acordo da licencia"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Teclado"
-
-#: ../../install_steps_interactive.pm_.c:206
-#, fuzzy
-msgid "Please choose your keyboard layout."
-msgstr "Escolla a disposición do seu teclado."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Esta é a lista completa de teclados dispońibles"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "żQué clase de instalación desexa?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instalar/Actualizar"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "żÉ isto unha instalación ou unha actualización?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Recomendada"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Experto"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade"
-msgstr "Actualización"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-#, fuzzy
-msgid "Upgrade packages only"
-msgstr "Gardar a selección de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:266
-#, fuzzy
-msgid "Please choose the type of your mouse."
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Porto do rato"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Escolla o porto serie onde está conectado o seu rato."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Configurando tarxetas PCMCIA..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Configurando o IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "ningunha partición dispońible"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Examinando as particións para atopar os puntos de montaxe"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Seleccione os puntos de montaxe"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Non se pode ler a táboa de particións, está demasiado deteriorada :(\n"
-"Pódese probar baleirando as particións erróneas (ĄPerderanse TODOS os "
-"datos!).\n"
-"A outra solución é impedir que o DrakX modifique a táboa de particións.\n"
-"(o erro é %s)\n"
-"\n"
-"żConcorda coa perda de tódalas particións?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"O DiskDrake non puido ler correctamente a táboa de particións.\n"
-"ĄContinúe ó seu propio risco!"
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:395
-#, fuzzy
-msgid "No root partition found to perform an upgrade"
-msgstr "Elixa as particións que desexa formatar"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Partición raíz"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "żCal é a partición raíz (/) do seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Necesita reiniciar o equipo para que a modificación da táboa\n"
-"de particións se tome en conta"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Elixa as particións que desexa formatar"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "żComprobar os bloques erróneos?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatando as particións"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creando e formatando o ficheiro %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr ""
-"Non hai espacio de intercambio dabondo para finalizar a instalación,\n"
-"por favor, engada algún"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Buscando os paquetes dispońibles"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Atopando os paquetes para actualizar"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"O seu sistema non ten espacio libre dabondo para a instalación ou "
-"actualización (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Completo (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Mínimo (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Recomendado (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:571
-#, fuzzy
-msgid "Load from floppy"
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Loading from floppy"
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../install_steps_interactive.pm_.c:573
-#, fuzzy
-msgid "Package selection"
-msgstr "Selección dos grupos de paquetes"
-
-#: ../../install_steps_interactive.pm_.c:578
-#, fuzzy
-msgid "Insert a floppy containing package selection"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Gardar nun disquete"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:671
-#, fuzzy
-msgid "Type of install"
-msgstr "Elixa o paquete a instalar"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:675
-#, fuzzy
-msgid "With X"
-msgstr "Agarde"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se ten tódolos CDs na lista inferior, prema Aceptar.\n"
-"Se non ten ningún deses CDs, prema Cancelar.\n"
-"Se só faltan algúns dos CDs, desmárqueos, e prema Aceptar."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom etiquetado \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Preparando a instalación"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalando o paquete %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Configuración trala instalación"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Vostede terá agora a posibilidade baixar programas de criptografía.\n"
-"\n"
-"AVISO:\n"
-"\n"
-"Por mor de requirimentos xerais aplicables a estes programas, e impostos\n"
-"por varias xurisdiccións, o cliente e/ou o usuario final destes programas "
-"ten\n"
-"que se asegurar de que as leis da súa xurisdicción lle permiten baixar,\n"
-"almacenar e/ou usar estes programas.\n"
-"\n"
-"Ademais, o cliente e/ou o usuario final ten que ter especial coidado en non\n"
-"infrinxi-las leis da súa xurisdicción. Se o cliente e/ou o usuario final "
-"non\n"
-"respeta estas leis aplicables, incorrerá en sancións graves.\n"
-"\n"
-"De ningún xeito Mandrakesoft nin os seus fabricantes e/ou provedores serán\n"
-"responsables de danos especiais, indirectos ou incidentais, sexan o que "
-"foren\n"
-"(incluindo, pero non limitando a, perda de beneficios, interrupción dos\n"
-"negocios, perda de datos comerciais e outras perdas pecuniarias, e nas\n"
-"eventuais responsabilidades e indemnizacións a seren pagadas por decisión\n"
-"dun tribunal) procedentes do uso, posesión, ou simplemente o feito de "
-"baixar\n"
-"este software, ó cal o cliente e/ou o usuario final tivese eventualmente\n"
-"acceso despois de asinar este acordo.\n"
-"\n"
-"Para calquera pregunta acerca de este acordo, por favor póńase en contacto "
-"con\n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:926
-#, fuzzy
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr "Contactando co espello para obter a lista dos paquetes dispońibles"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escoller un espello do que coller os paquetes"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Contactando co espello para obter a lista dos paquetes dispońibles"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "żCal é a súa zona horaria?"
-
-#: ../../install_steps_interactive.pm_.c:972
-#, fuzzy
-msgid "Hardware clock set to GMT"
-msgstr "żO reloxo interno do seu ordenador usa a hora GMT?"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:980
-#, fuzzy
-msgid "NTP Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Sen impresora"
-
-#: ../../install_steps_interactive.pm_.c:1032
-#, fuzzy
-msgid "Do you have an ISA sound card?"
-msgstr "żTen algunha outra?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Resume"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Rato"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Zona horaria"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Impresora"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "Tarxeta RDSI"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Tarxeta de son"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "Tarxeta de TV"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-#, fuzzy
-msgid "NIS"
-msgstr "Usar NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-#, fuzzy
-msgid "Local files"
-msgstr "Impresora local"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Contrasinal de root"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Sen contrasinal"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Este contrasinal é demasiado simple (ten que ter polo menos %d caracteres)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Autenticación"
-
-#: ../../install_steps_interactive.pm_.c:1126
-#, fuzzy
-msgid "Authentication LDAP"
-msgstr "Autenticación"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1128
-#, fuzzy
-msgid "LDAP Server"
-msgstr "Servidor"
-
-#: ../../install_steps_interactive.pm_.c:1134
-#, fuzzy
-msgid "Authentication NIS"
-msgstr "Autenticación NIS"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "Dominio NIS"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: ../../install_steps_interactive.pm_.c:1171
-#, fuzzy
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Un disco de arrinque personalizado dálle a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"útil se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuración do seu equipo.\n"
-"Un disco de arrinque personalizado tamén pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo así moito máis fácil a recuperación no caso de fallo\n"
-"grave do sistema. żDesexa crear un disco de arrinque para o seu sistema?"
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Primeira unidade de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Segunda unidade de disquete"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Omitir"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Un disco de arrinque personalizado dálle a posibilidade de arrincar o seu\n"
-"equipo baixo Linux sen depender do cargador de arrinque normal. Isto pode "
-"ser\n"
-"útil se non desexa instalar LILO (ou grub) no seu sistema, ou se outro "
-"sistema\n"
-"operativo o borra ou se LILO non funciona coa configuración do seu equipo.\n"
-"Un disco de arrinque personalizado tamén pode ser usado coa imaxe de "
-"rescate\n"
-"de Mandrake, facendo así moito máis fácil a recuperación no caso de fallo\n"
-"grave do sistema. żDesexa crear un disco de arrinque para o seu sistema?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Desculpe, pero non hai ningunha disqueteira dispońible"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Escolla a disqueteira que quere usar para crear o disco de arranque"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Insira un disquete na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Creando o disco de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Preparando o cargador de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "żDesexa usar aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Erro instalando aboot, \n"
-"żprobar a forzar a instalación mesmo se iso destrúe a primeira partición?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-#, fuzzy
-msgid "Installing bootloader"
-msgstr "Cargador de arrinque"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "A instalación do xestor de arrinque fallou. Ocorreu o seguinte erro:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Insira un disquete baleiro na unidade %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Creando un disquete de auto-instalación"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Algunhas das etapas non foron completadas.\n"
-"\n"
-"żDesexa realmente saír agora?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Noraboa, a instalación rematou.\n"
-"Quite o disco de arrinque da unidade e prema [enter] para reiniciar.\n"
-"\n"
-"\n"
-"Para información sobre parches dispońibles para esta versión\n"
-"de Mandrake Linux, consulte o ficheiro de erratas dispońibles en\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Para información sobre a configuración do seu sistema, despois\n"
-"da instalación, hai un capítulo na Guía do Usuario Oficial\n"
-"de Mandrake Linux."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Xerar disquete de auto-instalación"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"A auto-instalación pode ser moi automatizada se así\n"
-"se desexa, nese caso adquirirá o control do disco duro\n"
-"(isto vale para a instalación noutro equipo).\n"
-"\n"
-"Pode preferir realizar novamente a instalación.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatizada"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Reproducir"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Gardar a selección de paquetes"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Instalación de Mandrake Linux %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> entre elementos | <Space> escoller | <F12> seguinte "
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "falla o kdesu"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-#, fuzzy
-msgid "Choose a file"
-msgstr "Escolla a acción"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Avanzado"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr ""
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Agarde, por favor"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Expandir árbore"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Pechar árbore"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Mudar entre lista completa e ordenada por grupos"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Elección incorrecta, tente de novo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "żA súa escolla? (por omisión %s)"
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:68
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "żA súa escolla? (por omisión %s)"
-
-#: ../../interactive_stdio.pm_.c:93
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opcións: %s"
-
-#: ../../interactive_stdio.pm_.c:94
-#, fuzzy
-msgid "Do you want to click on this button? "
-msgstr "żDesexa usar aboot?"
-
-#: ../../interactive_stdio.pm_.c:103
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "żA súa escolla? (por omisión %s)"
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr ""
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Checo (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Alemán"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Teclado dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Espańol"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finlandés"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francés"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Noruegués"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Polaco"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruso"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Sueco"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "Británico"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "Estadounidense"
-
-#: ../../keyboard.pm_.c:188
-#, fuzzy
-msgid "Albanian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenio (antigo)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenio (máquina de escribir)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenio (fonético)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaianí (latín)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belga"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenio (fonético)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Búlgaro"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasileiro (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bielorruso"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Suízo (alemán)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Suízo (francés)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Checo (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Alemán (sen teclas acentuadas)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Dinamarqués"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (EUA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Noruegués)"
-
-#: ../../keyboard.pm_.c:212
-#, fuzzy
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (EUA)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonio"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Xeorxiano (\"ruso\")"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Xeorxiano (\"latino\")"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grego"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Húngaro"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Croata"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Israelí"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Israelí (Fonético)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iraniano"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandés"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Italiano"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Xaponés de 106 teclas"
-
-#: ../../keyboard.pm_.c:231
-#, fuzzy
-msgid "Korean keyboard"
-msgstr "Británico"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latinoamericano"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituano AZERTY (antigo)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituano AZERTY (novo)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituano \"ringleira de números\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituano \"fonético\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-#, fuzzy
-msgid "Latvian"
-msgstr "Localización"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Macedonio"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Holandés"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Polaco (disposición qwerty)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Polaco (disposición qwertz)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugués"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Canadiano (Québec)"
-
-#: ../../keyboard.pm_.c:247
-#, fuzzy
-msgid "Romanian (qwertz)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:248
-#, fuzzy
-msgid "Romanian (qwerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruso (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Esloveno"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Eslovaco (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Eslovaco (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-#, fuzzy
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaianí (cirílico)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Táboa"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Teclado Thai"
-
-#: ../../keyboard.pm_.c:261
-#, fuzzy
-msgid "Tajik keyboard"
-msgstr "Teclado Thai"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turco (tradicional modelo \"F\")"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turco (moderno modelo \"Q\")"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ucraíno"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "Estadounidense (internacional)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"ringleira de números\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-#, fuzzy
-msgid "Yugoslavian (latin)"
-msgstr "Iugoslavo (latín/cirílico)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Puntos de montaxe circulares %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Quitar primeiro os volumes lóxicos\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Rato Sun"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Rato de roda PS2 xenérico"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 botón"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Rato de 2 botóns xenérico"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Xenérico"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Roda"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serie"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Rato de 3 botóns xenérico"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Series"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Rato Logitech (serie, antigo tipo C7)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmouse"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 botóns"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 botóns"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "ningún"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Ningún rato"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Probe o seu rato"
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Para activar o rato,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "ĄMOVA A RODA!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Finalizar"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Seguinte ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "żÉ isto correcto?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Conectar á Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"O xeito máis habitual de conectar con adsl é con pppoe.\n"
-"Algunhas conexións usan pptp, e algunhas usan dhcp.\n"
-"Se non o sabe con certeza, escolla 'usar pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr ""
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "usar dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "usar pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "usar pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"żQue cliente dhcp desexa usar?\n"
-"Por omisión é o dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Non se detectou ningún adaptador de rede ethernet no seu sistema.\n"
-"Non se pode configurar este tipo de conexión."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Escolla a interface de rede"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr "Escolla o adaptador de rede que desexa usar para conectar á Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "non se atopou ningunha tarxeta de rede"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Configurando a rede"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Introduza o nome da súa máquina se o cońece.\n"
-"Algúns servidores DHCP precisan o nome da máquina para funcionar.\n"
-"Este nome debe ser completamente cualificado,\n"
-"como ``mińamaquina.meulab.mińacomp.es''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Nome de máquina"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Axudante da configuración de rede"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Módem RDSI externo"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Tarxeta RDSI interna"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "żQue tipo de conexión RDSI ten?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "New configuration (isdn-light)"
-msgstr "ĄDetectouse unha configuración de firewall!"
-
-#: ../../network/isdn.pm_.c:54
-#, fuzzy
-msgid "Old configuration (isdn4net)"
-msgstr "ĄDetectouse unha configuración de firewall!"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "Configuración da RDSI"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Seleccione o seu provedor.\n"
-" Se non está na lista, escolla 'Unlisted'"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol"
-msgstr "Protocolo de arrinque"
-
-#: ../../network/isdn.pm_.c:183
-#, fuzzy
-msgid "Europe protocol (EDSS1)"
-msgstr "Europa (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid "Protocol for the rest of the world"
-msgstr "Resto do mundo"
-
-#: ../../network/isdn.pm_.c:185
-#, fuzzy
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Resto do mundo \n"
-" sen canle-D (lińas dedicadas)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "żQué protocolo desexa usar?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "żQué tipo de tarxeta ten?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Non sei"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Se ten unha tarxeta ISA, os valores na seguinte pantalla deberían ser os "
-"correctos.\n"
-"\n"
-"Se ten unha tarxeta PCMCIA, ten que cońecer a irq e a e/s da tarxeta.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Abortar"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Continuar"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "żCal é a sua tarxeta RDSI?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Detectouse unha Tarxeta RDSI PCI, pero se descońece o tipo. Seleccione unha "
-"tarxeta PCI na seguinte pantalla."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Non se atopou ningunha tarxeta RDSI PCI. Seleccione unha na próxima pantalla."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Escolla o porto serie onde está conectado o seu módem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Opcións de chamada"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Nome da conexión"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Número de teléfono"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "ID do login"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr ""
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Baseado nun script"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Baseado nun terminal"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Nome de dominio"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Primeiro Servidor DNS (opcional)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Segundo Servidor DNS (opcional)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Pode reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Está neste intre conectado á internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Pode conectar á Internet ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Non está neste intre conectado á Internet."
-
-#: ../../network/netconnect.pm_.c:41
-msgid "Connect"
-msgstr "Conectar"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "conexión por RDSI"
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Configurar a rede"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Conexión e configuración de Internet"
-
-#: ../../network/netconnect.pm_.c:100
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:109
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"Pode desconectar ou reconfigurar a súa conexión."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Configuración da rede"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Como está a facer unha instalación de rede, esta xa está configurada.\n"
-"Prema Aceptar para manter a configuración, ou Cancelar para reconfigurar a "
-"conexión de rede e Internet.\n"
-
-#: ../../network/netconnect.pm_.c:165
-#, fuzzy
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Conexión á Internet\n"
-"\n"
-"Vaise configurar a súa conexión á internet/rede.\n"
-"Se non quere usar a detección automática, desmarque a caixa.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Escolla o perfil para configurar"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Usar detección automática"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Detectando os dispositivos..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Conexión normal por módem"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detectado no porto %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "conexión por RDSI"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detectouse %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, fuzzy
-msgid "ADSL connection"
-msgstr "Conexión LAN"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detectouse na interface %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Conexión por cable"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-#, fuzzy
-msgid "cable connection detected"
-msgstr "Conexión por cable"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "Conexión LAN"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "tarxeta(s) ethernet detectada(s)"
-
-#: ../../network/netconnect.pm_.c:202
-#, fuzzy
-msgid "Choose the connection you want to configure"
-msgstr "Elixa a ferramenta que queira usar"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:227
-#, fuzzy
-msgid "Internet connection"
-msgstr "Compartición da conexión á Internet"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "żDesexa que a conexión se inicie ó arrincar?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Configuración da rede"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr ""
-
-#: ../../network/netconnect.pm_.c:252
-#, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "żDesexa reiniciar a rede?"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Noraboa. A configuración da rede e de internet está rematada.\n"
-"\n"
-"Agora vai ser aplicada ó seu sistema.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Tras facer iso, aconséllase reiniciar o sistema X para\n"
-"evitar os problemas de mudar o nome de máquina."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"AVISO: Este dispositivo foi configurado previamente para conectar á "
-"Internet.\n"
-"Simplemente acepte para manter o dispositivo configurado.\n"
-"Se modifica os campos de embaixo, subsituirá esta configuración."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Introduza o enderezo IP desta máquina, por favor.\n"
-"Cada valor ten que ser introducido coma un enderezo IP en\n"
-"notación decimal con puntos (por exemplo: 1.2.3.4)."
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Configurar o dispositivo de rede %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (controlador %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "Enderezo IP"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Máscara de rede"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "IP automático"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Introduza o nome da súa máquina.\n"
-"Ese nome debe ser un nome completamente cualificado,\n"
-"como ``mińamaquina.meulab.mińacomp.es''.\n"
-"Pode tamén introducir o enderezo IP da pasarela se usa unha"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "Servidor DNS"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Dispositivo de pasarela"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Configuración dos proxys"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "Proxy HTTP"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "Proxy FTP"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr ""
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "O proxy debería ser http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "O proxy debería ser ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Configuración de Internet"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "żQuere probar agora a conexión á Internet?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Probando a conexión..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "O sistema está conectado á Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr ""
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Semella que o sistema non está conectado á internet.\n"
-"Probe reconfigurando a conexión."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Configuración da conexión"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Encha ou marque os campos de embaixo"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ da tarxeta"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memoria da tarxeta (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "E/S da tarxeta"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "E/S_0 da tarxeta"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "E/S_1 da tarxeta"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "O seu número de teléfono persoal"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Nome do provedor (p.ex provider.net)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Número de teléfono do provedor"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Dns 1 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Dns 2 do provedor (opcional)"
-
-#: ../../network/tools.pm_.c:89
-#, fuzzy
-msgid "Choose your country"
-msgstr "Escoller teclado"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Modo de marcación"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-#, fuzzy
-msgid "Connection speed"
-msgstr "Tipo de conexión: "
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-#, fuzzy
-msgid "Connection timeout (in sec)"
-msgstr "Tipo de conexión: "
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Login da conta (nome de usuario)"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Contrasinal da conta"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "mount fallou: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "As particións estendidas non están soportadas nesta plataforma"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Ten un burato na táboa de particións, pero non se pode usar.\n"
-"A única solución é desprazar as particións primarias para que\n"
-"o burato esté despois das particións estendidas"
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Fallou a restauración a partir do ficheiro %s: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Erro escribindo ó ficheiro %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Está a acontecer algo grave coa súa unidade.\n"
-"A proba para verificar a integridade dos datos fallou.\n"
-"Isto significa que calquera escritura no disco producirá lixo aleatorio"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "debe telo"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "importante"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "moi bo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "bo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "indiferente"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr ""
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr ""
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr ""
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr ""
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:49
-#, fuzzy
-msgid "Printer on remote CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-#, fuzzy
-msgid "Printer on remote lpd server"
-msgstr "Servidor lpd remoto"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Impresora de rede (TCP/Socket)"
-
-#: ../../printer.pm_.c:52
-#, fuzzy
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impresora SMB/Windows 95/98/NT"
-
-#: ../../printer.pm_.c:53
-#, fuzzy
-msgid "Printer on NetWare server"
-msgstr "Servidor de impresión"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-#, fuzzy
-msgid "Enter a printer device URI"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr ""
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr ""
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Impresora local"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Impresora remota"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Erro escribindo ó ficheiro %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: ../../printer.pm_.c:841
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(módulo %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr ""
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP do servidor CUPS"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Por omisión)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Selección da conexión da impresora"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "żComo está conectada a impresora?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"Cun servidor CUPS remoto, non terá que configurar aquí\n"
-"ningunha impresora, xa que serán detectadas automaticamente.\n"
-"No caso de dúbida, seleccione \"Servidor CUPS remoto\"."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "Configuración da LAN"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Servidor CUPS remoto"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-#, fuzzy
-msgid "The IP address should look like 192.168.1.20"
-msgstr "Os enderezos IP deben estar no formato 1.2.3.4"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-#, fuzzy
-msgid "The port number should be an integer!"
-msgstr "O número de porto debe ser numérico"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Porto"
-
-#: ../../printerdrake.pm_.c:90
-#, fuzzy
-msgid "Automatic CUPS configuration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-#, fuzzy
-msgid "Detecting devices ..."
-msgstr "Detectando os dispositivos..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Probar portos"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Usar detección automática"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detectouse %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Escolla o porto serie onde está conectado o seu módem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Configuración"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-#, fuzzy
-msgid "Reading printer database ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Opcións da impresora remota lpd"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Para utilizar unha fila de impresión remota lpd, é necesario\n"
-"que indique o nome do servidor de impresión e o nome da fila\n"
-"nese servidor."
-
-#: ../../printerdrake.pm_.c:626
-#, fuzzy
-msgid "Remote host name"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:627
-#, fuzzy
-msgid "Remote printer name"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:630
-#, fuzzy
-msgid "Remote host name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:634
-#, fuzzy
-msgid "Remote printer name missing!"
-msgstr "Nome do servidor"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcións de impresora SMB (Windows 9x/NT)"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Para imprimir nunha impresora SMB, é necesario escribir o\n"
-"nome do servidor SMB (que non sempre é o mesmo que o nome de\n"
-"máquina TCP/IP) e posiblemente o enderezo IP do servidor de\n"
-"impresoras, ademais é necesario o nome do recurso compartido\n"
-"da impresora que quere usar, así como calquera nome de usuario,\n"
-"grupo de traballo ou contrasinal que for necesario."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "Servidor de SMB"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP do servidor SMB"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Nome de recurso compartido"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Grupo de traballo"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Opcións de impresora NetWare"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Para imprimir nunha impresora NetWare, é necesario escribir o nome\n"
-"do servidor de impresión NetWare (que non sempre é o mesmo que\n"
-"o nome de máquina TCP/IP), ademais do nome da fila de impresión\n"
-"que desexa usar, así como calquera nome de usuario ou contrasinal\n"
-"que for necesario."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Nome da fila de impresión"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcións da impresora de socket"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Para imprimir nunha impresora de socket, ten que fornecer\n"
-"o nome do servidor da impresora, e opcionalmente o número do porto."
-
-#: ../../printerdrake.pm_.c:854
-#, fuzzy
-msgid "Printer host name"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:858
-#, fuzzy
-msgid "Printer host name missing!"
-msgstr "Servidor de impresión"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI do dispositivo de impresión"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1004
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Nome da impresora"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Descrición"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Localización"
-
-#: ../../printerdrake.pm_.c:1021
-#, fuzzy
-msgid "Preparing printer database ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "żÉ isto correcto?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:1139
-#, fuzzy
-msgid "Printer model selection"
-msgstr "Conexión da impresora"
-
-#: ../../printerdrake.pm_.c:1140
-#, fuzzy
-msgid "Which printer model do you have?"
-msgstr "żQué tipo de impresora ten?"
-
-#: ../../printerdrake.pm_.c:1141
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-#, fuzzy
-msgid "OKI winprinter configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-#, fuzzy
-msgid "Lexmark inkjet configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1565
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "żDesexa probar a impresión?"
-
-#: ../../printerdrake.pm_.c:1582
-#, fuzzy
-msgid "Test pages"
-msgstr "Probar portos"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-#, fuzzy
-msgid "No test pages"
-msgstr "Si, imprimir ambas páxinas de proba"
-
-#: ../../printerdrake.pm_.c:1588
-#, fuzzy
-msgid "Print"
-msgstr "Impresora"
-
-#: ../../printerdrake.pm_.c:1590
-#, fuzzy
-msgid "Standard test page"
-msgstr "Ferramentas estándar"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1596
-#, fuzzy
-msgid "Alternative test page (A4)"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1598
-#, fuzzy
-msgid "Photo test page"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:1635
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"A(s) páxina(s) de proba enviáronse ó servidor de impresión.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"Estado da impresión:\n"
-"%s\n"
-"\n"
-"żFunciona correctamente?"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"A(s) páxina(s) de proba enviáronse ó servidor de impresión.\n"
-"Pode que lle leve un pouco ata que a impresora comece.\n"
-"żFunciona correctamente?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-#, fuzzy
-msgid "Close"
-msgstr "Rato"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Desactivando a rede"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Desactivando a rede"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Opcións da impresora"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1864
-#, fuzzy
-msgid "New printer name"
-msgstr "Sen impresora"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Configurar a impresora"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Probando a conexión..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Configurar a rede"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "O monitor non está configurado"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Configurando a rede"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "żQue sistema de impresión desexa usar?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Alto"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoico"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "żQue sistema de impresión desexa usar?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Selección da conexión da impresora"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "żQue sistema de impresión desexa usar?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Configurar impresora"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instalando o paquete %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Opcións da impresora"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Configurar impresora"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "żDesexa configurar unha impresora?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: ../../printerdrake.pm_.c:2419
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-"Estas son as filas de impresión.\n"
-"Pode engadir unha nova ou cambiar as que xa existen."
-
-#: ../../printerdrake.pm_.c:2420
-#, fuzzy
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Estas son as filas de impresión.\n"
-"Pode engadir unha nova ou cambiar as que xa existen."
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Configurar a rede"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "żDesexa probar a configuración?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Configuración de Internet"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "żDesexa probar a configuración?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Compartición da conexión á Internet"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Conexión da impresora"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Imprimindo páxina(s) de proba..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "żDesexa probar a configuración?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Impresora remota"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../printerdrake.pm_.c:2810
-#, fuzzy
-msgid "Default printer"
-msgstr "Impresora local"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "żDesexa reiniciar a rede?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Lendo a base de datos de controladores de CUPS..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-#, fuzzy
-msgid "Proxy configuration"
-msgstr "Configuración dos proxys"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr ""
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-#, fuzzy
-msgid "port"
-msgstr "Porto"
-
-#: ../../proxy.pm_.c:44
-#, fuzzy
-msgid "Url should begin with 'http:'"
-msgstr "O proxy debería ser http://..."
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-#, fuzzy
-msgid "The port part should be numeric"
-msgstr "O número de porto debe ser numérico"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-
-#: ../../proxy.pm_.c:65
-#, fuzzy
-msgid "Url should begin with 'ftp:'"
-msgstr "O proxy debería ser ftp://..."
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-
-#: ../../proxy.pm_.c:80
-#, fuzzy
-msgid "login"
-msgstr "Login automático"
-
-#: ../../proxy.pm_.c:82
-#, fuzzy
-msgid "password"
-msgstr "Contrasinal"
-
-#: ../../proxy.pm_.c:84
-#, fuzzy
-msgid "re-type password"
-msgstr "Sen contrasinal"
-
-#: ../../proxy.pm_.c:88
-#, fuzzy
-msgid "The passwords don't match. Try again!"
-msgstr "Os contrasinais non coinciden"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Non se pode engadir unha partición ó RAID _formatado_ md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Non se pode escribir o ficheiro %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid fallou"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid fallou (żpode que non estean as raidtools?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Non hai particións dabondo para o nivel RAID %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron, un xestor de comandos periódicos."
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd úsase para monitorizar o estado da batería e rexistralo a través do\n"
-"syslog. Tamén pode usarse para apagar a máquina cando a batería está baixa."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa os comandos programados polo comando at á hora indicada cando\n"
-"se executou at, e lanza comandos de lotes cando a carga media é baixa\n"
-"dabondo."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"O cron é un programa estándar de UNIX que executa programas especificados\n"
-"polo usuario en datas periódicas programadas. O vixie cron engade algunhas\n"
-"características ó cron básico de UNIX, incluindo mellor seguridade e\n"
-"opcións de configuración máis potentes."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM engade soporte para o rato ás aplicacións de texto de Linux, como\n"
-"o Midnight Commander. Tamén permite operacións de cortar e pegar co rato\n"
-"na consola, así como inclúe soporte para menús."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache é un servidor de World Wide Web. Úsase para servir ficheiros HTML\n"
-"e CGI."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"O daemon superservidor de internet (usualmente chamado inetd) lanza varios\n"
-"outros servicios de internet cando se precisan. É o responsable de iniciar\n"
-"moitos servicios, incluíndo telnet, ftp, rsh, e rlogin. Desactivando inetd\n"
-"desactívanse tódolos servicios de internet dos que é responsable."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Este paquete carga o mapa de teclado seleccionado en /etc/sysconfig/"
-"keyboard.\n"
-"Este pode escollerse usando a utilidade kbdconfig. Debería deixar isto\n"
-"activado para a maioría dos sistemas."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd é o daemon de impresión requirido para que o lpr funcione\n"
-"correctamente. É basicamente un servidor que distribúe os traballos de\n"
-"impresión á(s) impresora(s)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) é un servidor de nomes de dominio (DNS), que se emprega\n"
-"para converter os nomes de máquinas a enderezos IP."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monta e desmonta tódolos puntos de montaxe de sistemas de\n"
-"ficheiros de Rede (NFS), SMB (Lan Manager/Windows) e NCP (NetWare)."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/desactiva tódalas interfaces de rede configuradas para\n"
-"seren activadas no arrinque."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS é un protocolo popular para compartir ficheiros a través de redes TCP/"
-"IP.\n"
-"Este servicio fornece funcionalidade de servidor NFS, que se configura co\n"
-"ficheiro /etc/exports."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS é un protocolo popular para compartir ficheiros a través de\n"
-"redes TCP/IP. Este servicio fornece funcionalidade de bloqueo de ficheiros."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"O soporte PCMCIA é normalmente para cousas como ethernet e módems en\n"
-"portátiles. Non será arrincado ata que non estea configurado de xeito\n"
-"que non haxa problemas ó telo instalado en máquinas que non o precisan."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"O portmapper xestiona as conexións RPC, que son usadas por protocolos\n"
-"como NFS e NIS. O servidor portmap ten que estar a se executar en máquinas\n"
-"que actúan de servidores de protocolos que usan o mecanismo RPC."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix é un axente de transporte de correo (MTA), que é o programa\n"
-"que move o correo dunha máquina a outra."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Garda e restaura o estado da entropía do sistema para unha xeración\n"
-"de números aleatorios de calidade."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"O daemon routed permite actualizacións automáticas da táboa de\n"
-"encamińamento IP mediante o protocolo RIP. Mentres RIP se usa amplamente\n"
-"en redes pequenas, outros protocolos máis complexos de encamińamento\n"
-"precísanse para redes máis complexas."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"O protocolo rstat permite ós usuarios dunha rede obter\n"
-"métricas de rendemento de calquera máquina desa rede."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"O protocolo rusers permite ós usuarios dunha rede identificar quen\n"
-"está conectado noutras máquinas activas."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"O protocolo rwho permite que os usuarios remotos obteńan unha lista de\n"
-"tódolos usuarios conectados a unha máquina que está a executar o daemon\n"
-"rwho (similar ó finger)."
-
-#: ../../services.pm_.c:80
-#, fuzzy
-msgid "Launch the sound system on your machine"
-msgstr "Lanzar o sistema X-Window ó iniciar"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"O syslog é o método que usan moitos daemons para rexistrar mensaxes\n"
-"nos diversos ficheiros de rexistro do sistema. É unha boa idea executar\n"
-"sempre o syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: ../../services.pm_.c:84
-#, fuzzy
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Executa e para o Servidor de Fontes X ó arrincar e apagar."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Escolla os servicios que deben ser lanzados no arrinque do sistema"
-
-#: ../../services.pm_.c:122
-#, fuzzy
-msgid "Printing"
-msgstr "Impresora"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Mouse Systems"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Opcións da impresora remota lpd"
-
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Bases de datos"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "dispositivo"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "a se executar"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "parado"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servicios e daemons"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Non hai información adicional\n"
-"sobre este servicio, desculpe."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Ó arrincar"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Estado:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sector"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Resto do mundo"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Acceso á Internet"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedia - Gráficos"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Desenvolvemento"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Centro de control"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Interface de rede"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "Servidor de SMB"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Xogos"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Experto"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-#, fuzzy
-msgid "MandrakeStore"
-msgstr "obrigatorio"
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instalando o paquete %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Non se pode ler a táboa de particións, está demasiado deteriorada :-(\n"
-"Probarase a ir pońendo en branco as particións erróneas"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Erro"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Configuración trala instalación"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "ĄNoraboa!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Engadir usuario"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatando o ficheiro loopback %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Selección dos grupos de paquetes"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Eliminar fila"
-
-#: ../../standalone/drakbackup_.c:900
-msgid "Windows (FAT32)"
-msgstr "Windows(FAT32)"
-
-#: ../../standalone/drakbackup_.c:939
-msgid "Users"
-msgstr "Usuarios"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Probe o seu rato"
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Tente de novo"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Tente de novo"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "Sen contrasinal"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "Conexión LAN"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Selección da conexión da impresora"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Escolla a disposición do seu teclado."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Prema nunha partición"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Probe o seu rato"
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Nome de usuario"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Usar optimizacións de disco duro"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Usar optimizacións de disco duro"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-#, fuzzy
-msgid "What"
-msgstr "Agarde"
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Roda"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Opcións do módulo:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Configuración da rede"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-#, fuzzy
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr "Ficheiros:\n"
-
-#: ../../standalone/drakbackup_.c:1632
-#, fuzzy
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr "Ficheiros:\n"
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcións"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Escolla o porto serie onde está conectado o seu módem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Configuración da rede"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2083
-#, fuzzy
-msgid "Restore from Hard Disk."
-msgstr "Restaurar a partir dun disquete"
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Outros"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakbackup_.c:2152
-#, fuzzy
-msgid "Restore Users"
-msgstr "Restaurar a partir dun ficheiro"
-
-#: ../../standalone/drakbackup_.c:2153
-#, fuzzy
-msgid "Restore Other"
-msgstr "Restaurar a partir dun ficheiro"
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Personalizado"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr "Axuda"
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-msgid "Previous"
-msgstr "Anterior"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Estado:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-msgid "Restore"
-msgstr "Restaurar"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Texto"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Seleccionar paquetes"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Escolla a lingua que desexe usar."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Ficheiro de backup incorrecto"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Gardar nun ficheiro"
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Probe o seu rato"
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Escolla os paquetes que desexa instalar."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Configuración da rede"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Configuración da rede"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Sistemas de ficheiros"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Fallou a instalación do %s. Ocorreu o erro seguinte:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "%s non atopado"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-msgid "done"
-msgstr "feito"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-#, fuzzy
-msgid "Fonts copy"
-msgstr "Formatar disquete"
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Preparando a instalación"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-#, fuzzy
-msgid "Restart XFS"
-msgstr "restrinxir"
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "restrinxir"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatar particións"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-#, fuzzy
-msgid "Uninstall Fonts"
-msgstr "Desinstalando os RPMs"
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Punto de montaxe"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Elixa as particións que desexa formatar"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Office"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Abortar"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Impresora"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instalar sistema"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Seleccione un ficheiro"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Impresora remota"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Mensaxe inicial"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "ĄNon hai ningún adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instalar"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "ĄNon hai ningún adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Saír da instalación"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Compartición da conexión á Internet"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "A compartición da conexión á Internet está activada"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está activada.\n"
-"\n"
-"żQue desexa facer?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "desactivar"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "reconfigurar"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Desactivando os servidores..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "A compartición da conexión á Internet está agora desactivada."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "A compartición da conexión á Internet está desactivada"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está desactivada.\n"
-"\n"
-"żQue desexa facer?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "activar"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Activando os servidores..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "A compartición da conexión á Internet está agora activada."
-
-#: ../../standalone/drakgw_.c:201
-#, fuzzy
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Está a piques de configurar o seu ordenador para que comparta a conexión á "
-"Internet.\n"
-"\n"
-"Nota: necesita un adaptador de rede dedicado para configurar unha rede de "
-"área local (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (usando o módulo %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "ĄNon hai ningún adaptador de rede no seu sistema!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Non se detectou ningún adaptador de rede ethernet no seu sistema. Execute a "
-"ferramenta de configuración de hardware."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Interface de rede"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Só hai un adaptador de rede configurado no seu sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Vaise configurar a rede de área local usando ese adaptador."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Escolla o adaptador de rede que vai estar conectado á rede de área local."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "O monitor non está configurado"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Configuración do estilo de arrinque"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Configuración de Internet"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP do servidor CUPS"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ĄAtopouse un conflicto potencial de enderezos da LAN na configuración actual "
-"de %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "ĄDetectouse unha configuración de firewall!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"ĄAtención! Detectouse unha configuración de firewall existente. Pode que "
-"teńa que facer algún arranxo manual trala instalación."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Configurando..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Configurando os scripts, instalando o software, iniciando os servidores..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemas instalando o paquete %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Xa está todo configurado.\n"
-"Agora pode compartir a conexión á Internet con outros ordenadores da rede de "
-"área local, usando a configuración automática de rede (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-#, fuzzy
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está desactivada.\n"
-"\n"
-"żQue desexa facer?"
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr ""
-"A configuración da compartición da conexión á Internet xa foi feita.\n"
-"Actualmente está activada."
-
-#: ../../standalone/drakgw_.c:691
-#, fuzzy
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "A compartición da conexión á Internet está activada"
-
-#: ../../standalone/drakgw_.c:696
-#, fuzzy
-msgid "Internet connection sharing configuration"
-msgstr "Conexión e configuración de Internet"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuración de rede (%d adaptadores)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Perfil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Borrar perfil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Perfil para borrar:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novo perfil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Nome de máquina: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Acceso á Internet"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tipo:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Pasarela:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Interface:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Estado:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Configurar o acceso á Internet..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Controlador"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protocolo"
-
-#: ../../standalone/draknet_.c:232
-msgid "State"
-msgstr "Estado"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Configurar a rede de área local..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Axudante..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr ""
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Por favor, agarde... Aplicando a configuración"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-#, fuzzy
-msgid "Connected"
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Non conectado"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-#, fuzzy
-msgid "Disconnect..."
-msgstr "Conectar..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Protocolo de arrinque"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Iniciado o arrincar"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Activar"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Activar"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Configuración da conexión á Internet"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Configuración da conexión á Internet"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tipo de conexión: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parámetros"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Pasarela"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Tarxeta Ethernet"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "Cliente DHCP"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Establecendo o nivel de seguridade"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Centro de control"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Elixa a ferramenta que queira usar"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Canadiano (Québec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "East Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandés"
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "West Europe"
-msgstr "Europa"
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serie"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uso: keyboarddrake [--expert] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Escolla a disposición do seu teclado."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "żQuere que a tecla de Borrar devolva Suprimir na consola?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Mude o Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-#, fuzzy
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Por favor, insira o Cd-Rom de instalación na unidade e prema Aceptar.\n"
-"Se non o ten, prema Cancelar para evitar a actualización "
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr ""
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-#, fuzzy
-msgid "logdrake"
-msgstr "draknet"
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-msgid "/File/_New"
-msgstr "/Ficheiro/_Novo"
-
-#: ../../standalone/logdrake_.c:102
-msgid "<control>N"
-msgstr "<control>N"
-
-#: ../../standalone/logdrake_.c:103
-msgid "/File/_Open"
-msgstr "/Ficheiro/_Abrir"
-
-#: ../../standalone/logdrake_.c:103
-msgid "<control>O"
-msgstr "<control>A"
-
-#: ../../standalone/logdrake_.c:104
-msgid "/File/_Save"
-msgstr "/Ficheiro/_Gardar"
-
-#: ../../standalone/logdrake_.c:104
-msgid "<control>S"
-msgstr "<control>G"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr "/Ficheiro/Gardar _como"
-
-#: ../../standalone/logdrake_.c:106
-msgid "/File/-"
-msgstr "Ficheiro/-"
-
-#: ../../standalone/logdrake_.c:108
-msgid "/_Options"
-msgstr "/_Opcións"
-
-#: ../../standalone/logdrake_.c:109
-msgid "/Options/Test"
-msgstr "/Opcións/Proba"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr "/A_xuda"
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr "/Axuda/_Acerca..."
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Nome de usuario"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Mensaxe inicial"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Máquina:"
-
-#: ../../standalone/logdrake_.c:192
-#, fuzzy
-msgid "but not matching"
-msgstr "Máquina:"
-
-#: ../../standalone/logdrake_.c:196
-msgid "Choose file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:201
-msgid "Calendar"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:211
-msgid "Content of the file"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Configuración da LAN"
-
-#: ../../standalone/logdrake_.c:406
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:414
-msgid "proftpd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:417
-#, fuzzy
-msgid "sshd"
-msgstr "shadow"
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Ext2"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "interesante"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatando"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Configuración"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr "Gardar como..."
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Escolla o seu tipo de rato."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "non se atopou ningún serial_usb\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "żEmular o terceiro botón?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Seleccione unha tarxeta gráfica"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Dispositivo de arrinque"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-#, fuzzy
-msgid "Firewalling Configuration"
-msgstr "lendo a configuración"
-
-#: ../../standalone/tinyfirewall_.c:44
-#, fuzzy
-msgid "Firewalling configuration"
-msgstr "lendo a configuración"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Escoller a lingua"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Clase de instalación"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Detectar discos duros"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Configurar o rato"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Escoller teclado"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr ""
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Sistemas de ficheiros"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatar particións"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Seleccionar paquetes"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Engadir usuario"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Configurar a rede"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Configurar servicios"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Cargador de arrinque"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Crear disquete de arrinque"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Configurar as X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instalar sistema"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Saír da instalación"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:82
-#, fuzzy, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Adaptador %s: %s"
-
-#: ../../tinyfirewall.pm_.c:84
-#, fuzzy, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Erro ó abrir %s para escritura: %s"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "lendo a configuración"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Por favor, agarde, preparando a instalación"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Ordenador de rede (cliente)"
-
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Office"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Estación de traballo Gnome"
-
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Ferramentas para o seu Palm Pilot ou o seu Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Estación de traballo"
-
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Firewall/Encamińador"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programas de oficina: procesadores de texto (kword, abiword), follas de "
-"cálculo (kspread, gnumeric), visualizadores de pdf, etc"
-
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Ferramentas de audio: reproductores de mp3 ou midi, mesturadores, etc"
-
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Libros e howtos sobre Linux e o software libre"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "Estación de traballo KDE"
-
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedia - Vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr ""
-"Conxunto de ferramentas para correo, novas, web, transferencia de ficheiros "
-"e chat"
-
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Bases de datos"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Tools to ease the configuration of your computer"
-msgstr "żDesexa probar a configuración?"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedia - Son"
-
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Utilidades"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Documentación"
-
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Ferramentas de consola"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Estación Internet"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Estación multimedia"
-
-#: ../../share/compssUsers:999
-msgid "Configuration"
-msgstr "Configuración"
-
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Máis escritorios gráficos (Gnome, IceWM)"
-
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"O ambiente de escritorio KDE, o ambiente gráfico básico cunha colección de "
-"ferramentas que o acompańan"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Ferramentas para crear e gravar CDs"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Estación de traballo de oficina"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Servidor"
-
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Programas gráficos como o Gimp"
-
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
-
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-"Bibliotecas de desenvolvemento en C e C++, programas e ficheiros include"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Servidor de ordenadores de rede"
-
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Correo/Groupware/Novas"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Estación de xogos"
-
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Reproductores e editores de vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedia - Gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programas de divertimentos: arcade, taboleiros, estratexia, etc"
-
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Conxunto de ferramentas para ler e enviar correo e novas (pine, mutt, tin..) "
-"e para navegar na Web"
-
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arquivado, emuladores, monitorizaxe"
-
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Finanzas persoais"
-
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Un ambiente gráfico cun conxunto de aplicacións amigables e ferramentas de "
-"escritorio"
-
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "Acceso á Internet"
-
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Programas de reproducción/edición de son e vídeo"
-
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Outros escritorios gráficos"
-
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editores, shells, ferramentas de ficheiro, terminais"
-
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programas para xestionar as súas finanzas, como o gnucash"
-
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Xestión de información persoal"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedia - Gravación de CD"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Estación de traballo científica"
-
-#~ msgid "None"
-#~ msgstr "Ningún"
-
-#~ msgid "You may now provide its options to module %s."
-#~ msgstr "Agora pode indicar as opcións para o módulo %s."
-
-#~ msgid "Low"
-#~ msgstr "Baixo"
-
-#~ msgid "Medium"
-#~ msgstr "Medio"
-
-#~ msgid ""
-#~ "Few improvements for this security level, the main one is that there are\n"
-#~ "more security warnings and checks."
-#~ msgstr ""
-#~ "Poucas melloras neste nivel de seguridade, a principal é que hai máis\n"
-#~ "avisos e comprobacións de seguridade."
-
-#~ msgid "mount failed"
-#~ msgstr "mount fallou"
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-#~ "local time according to the time zone you selected."
-#~ msgstr ""
-#~ "Linux xestiona a hora en GMT ou \"Hora do Meridiano de Greenwich\", e a\n"
-#~ "traslada á hora local dependendo da zona que vostede escolla."
-
-#~ msgid "Connect to Internet"
-#~ msgstr "Conectar á Internet"
-
-#~ msgid "Disconnect from Internet"
-#~ msgstr "Desconectar de Internet"
-
-#~ msgid "Configure network connection (LAN or Internet)"
-#~ msgstr "Configurar a conexión de rede (LAN ou Internet)"
-
-#~ msgid "Active"
-#~ msgstr "Activar"
-
-#~ msgid "A printer, model \"%s\", has been detected on "
-#~ msgstr "Unha impresora, de modelo \"%s\", foi detectada en "
-
-#~ msgid "Local Printer Device"
-#~ msgstr "Dispositivo de impresión local"
-
-#~ msgid "Printer Device"
-#~ msgstr "Dispositivo da impresora"
-
-#~ msgid "Choose the size you want to install"
-#~ msgstr "Escolla o tamańo que quere instalar"
-
-#~ msgid "Total size: "
-#~ msgstr "Tamańo total: "
-
-#~ msgid "Please wait, "
-#~ msgstr "Agarde, por favor, "
-
-#~ msgid "Total time "
-#~ msgstr "Tempo total "
-
-#~ msgid "Use existing configuration for X11?"
-#~ msgstr "żUsar a configuración existente para X11?"
-
-#~ msgid ""
-#~ "What device is your printer connected to \n"
-#~ "(note that /dev/lp0 is equivalent to LPT1:)?\n"
-#~ msgstr ""
-#~ "żA que dispositivo está conectada a súa impresora?\n"
-#~ "(advirta que /dev/lp0 é equivalente a LPT1:)\n"
-
-#~ msgid "$_"
-#~ msgstr "$_"
-
-#~ msgid ""
-#~ "Warning, the network adapter is already configured. I will reconfigure it."
-#~ msgstr ""
-#~ "Atención, o adaptador de rede xa está configurado. Vai ser reconfigurado."
-
-#~ msgid "New"
-#~ msgstr "Novo"
-
-#~ msgid "Ambiguity (%s), be more precise\n"
-#~ msgstr "Ambigüidade (%s), sexa máis preciso\n"
-
-#~ msgid " ? (default %s) "
-#~ msgstr " ? (por omisión %s) "
-
-#~ msgid "Your choice? (default %s enter `none' for none) "
-#~ msgstr "żA súa escolla? (por omisión %s, escriba 'none' para ningunha)"
-
-#~ msgid "can not open /etc/sysconfig/autologin for reading: %s"
-#~ msgstr "non se pode abrir /etc/sysconfig/autologin para lectura: %s"
-
-#~ msgid "Do you want to restart the network"
-#~ msgstr "żDesexa reiniciar a rede?"
-
-#~ msgid ""
-#~ "\n"
-#~ "Do you agree?"
-#~ msgstr ""
-#~ "\n"
-#~ "żConcorda?"
-
-#~ msgid "I'm about to restart the network device:\n"
-#~ msgstr "Está a piques de se reiniciar o dispositivo de rede:\n"
-
-#~ msgid "I'm about to restart the network device %s. Do you agree?"
-#~ msgstr "Está a piques de se reiniciar o dispositivo de rede %s. żConcorda?"
-
-#~ msgid ""
-#~ "Please choose your preferred language for installation and system usage."
-#~ msgstr "Escolla a lingua que prefira para a instalación e para o sistema."
-
-#~ msgid ""
-#~ "You need to accept the terms of the above license to continue "
-#~ "installation.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Accept\" if you agree with its terms.\n"
-#~ "\n"
-#~ "\n"
-#~ "Please click on \"Refuse\" if you disagree with its terms. Installation "
-#~ "will end without modifying your current\n"
-#~ "configuration."
-#~ msgstr ""
-#~ "Ten que aceptar os termos da licencia de enriba para continuar coa "
-#~ "instalación.\n"
-#~ "\n"
-#~ "\n"
-#~ "Por favor, prema \"Aceptar\" se concorda con eses termos.\n"
-#~ "\n"
-#~ "\n"
-#~ "Por favor, prema \"Rexeitar\" se non concorda con eses termos. A "
-#~ "instalación rematará sen modificar a súa configuración actual."
-
-#~ msgid "Choose the layout corresponding to your keyboard from the list above"
-#~ msgstr "Escolla a disposición do teclado que corresponda ó seu na lista"
-
-#~ msgid ""
-#~ "If you wish other languages (than the one you choose at\n"
-#~ "beginning of installation) will be available after installation, please "
-#~ "chose\n"
-#~ "them in list above. If you want select all, you just need to select \"All"
-#~ "\"."
-#~ msgstr ""
-#~ "Se desexa ter outras linguas (á parte da que escolleu ó principio da\n"
-#~ "instalación) dispońibles trala instalación, escóllaas na lista de "
-#~ "enriba.\n"
-#~ "Se quere seleccionar todas, só ten que usar \"Todas\"."
-
-#~ msgid ""
-#~ "Select:\n"
-#~ "\n"
-#~ " - Customized: If you are familiar enough with GNU/Linux, you may then "
-#~ "choose\n"
-#~ " the primary usage for your machine. See below for details.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Expert: This supposes that you are fluent with GNU/Linux and want to\n"
-#~ " perform a highly customized installation. As for a \"Customized\"\n"
-#~ " installation class, you will be able to select the usage for your "
-#~ "system.\n"
-#~ " But please, please, DO NOT CHOOSE THIS UNLESS YOU KNOW WHAT YOU ARE "
-#~ "DOING!"
-#~ msgstr ""
-#~ "Seleccione:\n"
-#~ "\n"
-#~ " - Personalizada: Se xa está familiarizado con GNU/Linux, pode entón "
-#~ "escoller\n"
-#~ " o uso principal da súa máquina. Mire embaixo para os detalles.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Experto: Isto supón que vostede manexa ben GNU/Linux e quere facer\n"
-#~ " unha instalación altamente personalizada. Do mesmo xeito que coa\n"
-#~ " clase de instalación \"Personalizada\", poderá escoller o uso do seu\n"
-#~ " sistema. Pero, por favor, ĄNON ESCOLLA ISTO A MENOS QUE SAIBA O QUE\n"
-#~ " ESTÁ A FACER!"
-
-#~ msgid ""
-#~ "You must now define your machine usage. Choices are:\n"
-#~ "\n"
-#~ "* Workstation: this the ideal choice if you intend to use your machine "
-#~ "primarily for everyday use, at office or\n"
-#~ " at home.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Development: if you intend to use your machine primarily for software "
-#~ "development, it is the good choice. You\n"
-#~ " will then have a complete collection of software installed in order to "
-#~ "compile, debug and format source code,\n"
-#~ " or create software packages.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Server: if you intend to use this machine as a server, it is the good "
-#~ "choice. Either a file server (NFS or\n"
-#~ " SMB), a print server (Unix style or Microsoft Windows style), an "
-#~ "authentication server (NIS), a database\n"
-#~ " server and so on. As such, do not expect any gimmicks (KDE, GNOME, "
-#~ "etc.) to be installed."
-#~ msgstr ""
-#~ "Agora ten que definir o uso da súa máquina. As escollas son:\n"
-#~ "\n"
-#~ "* Estación de traballo: esta é a escolla ideal se pretende usar a súa "
-#~ "máquina principalmente para o uso cotián,\n"
-#~ " na oficina ou na casa.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Desenvolvemento: se pretende usar a súa máquina principalmente para o "
-#~ "desenvolvemento de software, esta é unha boa escolla.\n"
-#~ " Terá unha completa colección de software instalado para compilar, "
-#~ "depurar e formatar código fonte, ou\n"
-#~ " para crear paquetes de software.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Servidor: se pretende usar esta máquina coma servidor, é a escolla "
-#~ "correcta. Sexa un servidor de ficheiros (NFS\n"
-#~ " ou SMB), un servidor de impresión (estilo Unix ou Microsoft Windows), "
-#~ "un servidor de autenticación (NIS), un servidor\n"
-#~ " de bases de datos, etc... Como tal, non espere que haxa cousas como "
-#~ "KDE, GNOME, etc. instaladas."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now select the group of packages you wish to\n"
-#~ "install or upgrade.\n"
-#~ "\n"
-#~ "\n"
-#~ "DrakX will then check whether you have enough room to install them all. "
-#~ "If not,\n"
-#~ "it will warn you about it. If you want to go on anyway, it will proceed "
-#~ "onto the\n"
-#~ "installation of all selected groups but will drop some packages of "
-#~ "lesser\n"
-#~ "interest. At the bottom of the list you can select the option \n"
-#~ "\"Individual package selection\"; in this case you will have to browse "
-#~ "through\n"
-#~ "more than 1000 packages..."
-#~ msgstr ""
-#~ "Agora pode selecciona-lo grupo de paquetes que desexa instalar\n"
-#~ "ou actualizar.\n"
-#~ "\n"
-#~ "DrakX comprobará se ten espacio dabondo para instalalos todos. Se non,\n"
-#~ "avisaralle diso. Se quere seguir aínda así, procederá coa instalación\n"
-#~ "de tódolos grupos seleccionados, pero deixará algún de menor interese.\n"
-#~ "Ó final da lista pode marca-la opción \"Selección individual de paquetes"
-#~ "\";\n"
-#~ "neste caso terá que percorrer máis de 1000 paquetes..."
-
-#~ msgid ""
-#~ "If you have all the CDs in the list above, click Ok. If you have\n"
-#~ "none of those CDs, click Cancel. If only some CDs are missing, unselect "
-#~ "them,\n"
-#~ "then click Ok."
-#~ msgstr ""
-#~ "Se ten tódolos CDs da lista superior, prema Aceptar. Se non ten\n"
-#~ "ningún deses CDs, prema Cancelar. Se só faltan algúns dos CDs,\n"
-#~ "desmárqueos, e prema Aceptar."
-
-#~ msgid "Please turn on your modem and choose the correct one."
-#~ msgstr "Acenda o seu módem e escolla o correcto."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, the correct informations can "
-#~ "be\n"
-#~ "obtained from your Internet Service Provider."
-#~ msgstr ""
-#~ "Vostede pode agora introduci-las opcións de chamada. Se non está seguro "
-#~ "de\n"
-#~ "que escribir, a información correcta pode obtela do seu ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now configure your network device.\n"
-#~ "\n"
-#~ " * IP address: if you don't know or are not sure what to enter, ask "
-#~ "your network administrator.\n"
-#~ " You should not enter an IP address if you select the option "
-#~ "\"Automatic IP\" below.\n"
-#~ "\n"
-#~ " * Netmask: \"255.255.255.0\" is generally a good choice. If you don't "
-#~ "know or are not sure what to enter,\n"
-#~ " ask your network administrator.\n"
-#~ "\n"
-#~ " * Automatic IP: if your network uses BOOTP or DHCP protocol, select "
-#~ "this option. If selected, no value is needed in\n"
-#~ " \"IP address\". If you don't know or are not sure if you need to "
-#~ "select this option, ask your network administrator."
-#~ msgstr ""
-#~ "Introduza:\n"
-#~ "\n"
-#~ " - Dirección IP: se non a cońece, pregúntelle ó seu administrador de "
-#~ "rede\n"
-#~ "ou ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Máscara de Rede: \"255.255.255.0\" é normalmente unha boa elección. "
-#~ "Se\n"
-#~ "non está seguro, pregunte ó seu administrador de rede ou ISP.\n"
-#~ "\n"
-#~ "\n"
-#~ " - IP automática: Se a súa rede usa o protocolo bootp ou dhcp, escolla\n"
-#~ "esta opción. Neste caso, non é necesario ningún valor en \"Dirección IP"
-#~ "\".\n"
-#~ "Se non está seguro, pregunte ó seu administrador de rede ou ISP.\n"
-
-#, fuzzy
-#~ msgid ""
-#~ "You may now enter your host name if needed. If you\n"
-#~ "don't know or are not sure what to enter, ask your network administrator."
-#~ msgstr ""
-#~ "Se a súa rede usa NIS, escolla \"Usar NIS\". Se non o sabe, pregúntelle "
-#~ "ó\n"
-#~ "seu administrador de rede."
-
-#~ msgid ""
-#~ "You may now enter dialup options. If you're not sure what to enter, the\n"
-#~ "correct information can be obtained from your ISP."
-#~ msgstr ""
-#~ "Agora pode introducir as opcións de marcado. Se non está seguro do\n"
-#~ "que escribir, a información correcta pode obtela do seu ISP."
-
-#~ msgid ""
-#~ "If you will use proxies, please configure them now. If you don't know if\n"
-#~ "you should use proxies, ask your network administrator or your ISP."
-#~ msgstr ""
-#~ "Se vai usar proxys, configúreos agora. Se non sabe se vai usar proxys,\n"
-#~ "pregunte ó seu administrador de rede ou ó seu ISP."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can install cryptographic package if your internet connection has "
-#~ "been\n"
-#~ "set up correctly. First choose a mirror where you wish to download "
-#~ "packages and\n"
-#~ "after that select the packages to install.\n"
-#~ "\n"
-#~ "\n"
-#~ "Note you have to select mirror and cryptographic packages according\n"
-#~ "to your legislation."
-#~ msgstr ""
-#~ "Pode instalar paquetes de criptografía se xa configurou a súa conexión a\n"
-#~ "internet correctamente. Primeiro escolla un espello do que quere baixa-"
-#~ "los\n"
-#~ "paquetes, e entón escolla os paquetes que desexa instalar.\n"
-#~ "\n"
-#~ "Percátese de que ten que escolle-lo espello e os paquetes criptográficos\n"
-#~ "de acordo coa súa lexislación."
-
-#~ msgid "You can now select your timezone according to where you live."
-#~ msgstr ""
-#~ "Agora pode seleccionar a zona horaria dependendo do lugar onde viva."
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now enter the root password for your Mandrake Linux system.\n"
-#~ "The password must be entered twice to verify that both password entries "
-#~ "are identical.\n"
-#~ "\n"
-#~ "\n"
-#~ "Root is the system's administrator and is the only user allowed to modify "
-#~ "the\n"
-#~ "system configuration. Therefore, choose this password carefully. \n"
-#~ "Unauthorized use of the root account can be extemely dangerous to the "
-#~ "integrity\n"
-#~ "of the system, its data and other system connected to it.\n"
-#~ "\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. It should never be written down.\n"
-#~ "\n"
-#~ "\n"
-#~ "Do not make the password too long or complicated, though: you must be "
-#~ "able to\n"
-#~ "remember it without too much effort."
-#~ msgstr ""
-#~ "Agora pode introduci-lo contrasinal do superusuario para o seu sistema\n"
-#~ "Mandrake Linux. O contrasinal deberá ser tecleado dúas veces para\n"
-#~ "comprobar que ámbolos dous son idénticos.\n"
-#~ "\n"
-#~ "\n"
-#~ "O superusuario (root) é o administrador do sistema, e é o único usuario\n"
-#~ "ó que se lle permete modifica-la configuración do sistema. ĄPor tanto,\n"
-#~ "escolla o contrasinal con coidado! O uso non autorizado da conta de root\n"
-#~ "pode ser extremadamente perigoso para a integridade do sistema e os seus\n"
-#~ "datos, e para os outros sistemas conectados a el. O contrasinal debería\n"
-#~ "ser unha mestura de caracteres alfanuméricos e de 8 caracteres de longo,\n"
-#~ "polo menos. NUNCA debe ser anotado. Non escolla un contrasinal longo\n"
-#~ "de máis ou complicado: ten que ser capaz de lembralo sen moito esforzo."
-
-# Non é realmente fuzzy, é só para revisala. :)
-#, fuzzy
-#~ msgid ""
-#~ "You may now create one or more \"regular\" user account(s), as\n"
-#~ "opposed to the \"privileged\" user account, root. You can create\n"
-#~ "one or more account(s) for each person you want to allow to use\n"
-#~ "the computer. Note that each user account will have its own\n"
-#~ "preferences (graphical environment, program settings, etc.)\n"
-#~ "and its own \"home directory\", in which these preferences are\n"
-#~ "stored.\n"
-#~ "\n"
-#~ "\n"
-#~ "First of all, create an account for yourself! Even if you will be the "
-#~ "only user\n"
-#~ "of the machine, you may NOT connect as root for daily use of the system: "
-#~ "it's a\n"
-#~ "very high security risk. Making the system unusable is very often a typo "
-#~ "away.\n"
-#~ "\n"
-#~ "\n"
-#~ "Therefore, you should connect to the system using the user account\n"
-#~ "you will have created here, and login as root only for administration\n"
-#~ "and maintenance purposes."
-#~ msgstr ""
-#~ "Pode agora crear unha ou varias contas de usuarios Ťnormaisť, como\n"
-#~ "contraposición á conta de usuario Ťprivilexiadoť, root. Vostede\n"
-#~ "pode crear unha ou máis contas para cada persoa á que vostede queira\n"
-#~ "permitirlle o uso do ordenador. Note que cada conta de usuario terá\n"
-#~ "as súas preferencias (ambiente gráfico, configuración dos programas, "
-#~ "etc.)\n"
-#~ "e o seu propio directorio (chamado \"home\"), no que se almacenan esas\n"
-#~ "preferencias.\n"
-#~ "\n"
-#~ "\n"
-#~ "Antes que nada, Ącree unha conta para vostede mesmo! Aínda se é a única\n"
-#~ "persoa que vai usa-la máquina, NON debe entrar como root para o uso\n"
-#~ "diario do sistema: é un risco de seguridade elevado. Facer que o\n"
-#~ "sistema fique totalmente inoperante, pode ser moitas veces causa dun\n"
-#~ "simple erro ó teclear.\n"
-#~ "\n"
-#~ "\n"
-#~ "Polo tanto, debe entrar no sistema usando a conta de usuario normal que\n"
-#~ "vai crear aquí, e entrar como root só para as tarefas de administración\n"
-#~ "que o precisen."
-
-#, fuzzy
-#~ msgid ""
-#~ "LILO and grub main options are:\n"
-#~ " - Boot device: Sets the name of the device (e.g. a hard disk\n"
-#~ "partition) that contains the boot sector. Unless you know specifically\n"
-#~ "otherwise, choose \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Video mode: This specifies the VGA text mode that should be selected\n"
-#~ "when booting. The following values are available: \n"
-#~ "\n"
-#~ " * normal: select normal 80x25 text mode.\n"
-#~ "\n"
-#~ " * <number>: use the corresponding text mode.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories\n"
-#~ "stored in \"/tmp\" when you boot your system, select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the\n"
-#~ "BIOS about the amount of RAM present in your computer. As consequence, "
-#~ "Linux may\n"
-#~ "fail to detect your amount of RAM correctly. If this is the case, you "
-#~ "can\n"
-#~ "specify the correct amount or RAM here. Please note that a difference of "
-#~ "2 or 4\n"
-#~ "MB between detected memory and memory present in your system is normal."
-#~ msgstr ""
-#~ "As opcións principais do LILO e do grub son:\n"
-#~ " - Dispositivo de arrinque: Establece o nome do dispositivo (p.ex unha\n"
-#~ "partición dun disco duro) que contén o sector de arrinque. A menos que\n"
-#~ "saiba específicamente que é outro, escolla \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Retardo antes de arrinca-la imaxe por omisión: Indica o número de\n"
-#~ "décimas de segundo que agardará o cargador de inicio antes de arrincar a\n"
-#~ "primeira imaxe. Isto é útil nos sistemas que arrincan inmediatamente do\n"
-#~ "disco duro tras activa-lo teclado. O boot loader non agarda se o \"retardo"
-#~ "\"\n"
-#~ "é cero ou non se indica.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Modo de vídeo: Indica o modo de texto VGA que será utilizado ó\n"
-#~ "arrincar. Os seguintes valores están dispońibles:\n"
-#~ " * normal: escoller modo de texto normal 80x25.\n"
-#~ " * <número>: usa-lo modo de texto correspondente."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO is a bootloader for SPARC: it is able to boot\n"
-#~ "either GNU/Linux or any other operating system present on your computer.\n"
-#~ "Normally, these other operating systems are correctly detected and\n"
-#~ "installed. If this is not the case, you can add an entry by hand in this\n"
-#~ "screen. Be careful as to choose the correct parameters.\n"
-#~ "\n"
-#~ "\n"
-#~ "You may also want not to give access to these other operating systems to\n"
-#~ "anyone, in which case you can delete the corresponding entries. But\n"
-#~ "in this case, you will need a boot disk in order to boot them!"
-#~ msgstr ""
-#~ "LILO (O LInux LOader) e Grub son cargadores de arrinque: poden arrincar\n"
-#~ "Linux ou outro sistema operativo presente no seu ordenador.\n"
-#~ "Normalmente, estes outros sitemas son detectados correctamente e "
-#~ "instalados.\n"
-#~ "Se non é o caso, pode engadir unha entrada a man nesta pantalla. Sexa\n"
-#~ "coidadoso na escolla dos parámetros correctos.\n"
-#~ "\n"
-#~ "\n"
-#~ "Tamén pode non querer dar acceso a eses outros sitemas operativos a "
-#~ "calquera,\n"
-#~ "poidendo borrar as entradas correspondentes. Pero neste caso, precisará\n"
-#~ "un disquete de arrinque para poder usalos."
-
-#, fuzzy
-#~ msgid ""
-#~ "SILO main options are:\n"
-#~ " - Bootloader installation: Indicate where you want to place the\n"
-#~ "information required to boot to GNU/Linux. Unless you know exactly\n"
-#~ "what you are doing, choose \"First sector of drive (MBR)\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Delay before booting default image: Specifies the number in tenths\n"
-#~ "of a second the boot loader should wait before booting the first image.\n"
-#~ "This is useful on systems that immediately boot from the hard disk after\n"
-#~ "enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n"
-#~ "omitted or is set to zero."
-#~ msgstr ""
-#~ "As opcións principais do LILO e do grub son:\n"
-#~ " - Dispositivo de arrinque: Establece o nome do dispositivo (p.ex unha\n"
-#~ "partición dun disco duro) que contén o sector de arrinque. A menos que\n"
-#~ "saiba específicamente que é outro, escolla \"/dev/hda\".\n"
-#~ "\n"
-#~ "\n"
-#~ " - Retardo antes de arrinca-la imaxe por omisión: Indica o número de\n"
-#~ "décimas de segundo que agardará o cargador de inicio antes de arrincar a\n"
-#~ "primeira imaxe. Isto é útil nos sistemas que arrincan inmediatamente do\n"
-#~ "disco duro tras activa-lo teclado. O boot loader non agarda se o \"retardo"
-#~ "\"\n"
-#~ "é cero ou non se indica.\n"
-#~ "\n"
-#~ "\n"
-#~ " - Modo de vídeo: Indica o modo de texto VGA que será utilizado ó\n"
-#~ "arrincar. Os seguintes valores están dispońibles:\n"
-#~ " * normal: escoller modo de texto normal 80x25.\n"
-#~ " * <número>: usa-lo modo de texto correspondente."
-
-#, fuzzy
-#~ msgid ""
-#~ "Now it's time to configure the X Window System, which is the\n"
-#~ "core of the GNU/Linux GUI (Graphical User Interface). For this purpose,\n"
-#~ "you must configure your video card and monitor. Most of these\n"
-#~ "steps are automated, though, therefore your work may only consist\n"
-#~ "of verifying what has been done and accept the settings :)\n"
-#~ "\n"
-#~ "\n"
-#~ "When the configuration is over, X will be started (unless you\n"
-#~ "ask DrakX not to) so that you can check and see if the\n"
-#~ "settings suit you. If they don't, you can come back and\n"
-#~ "change them, as many times as necessary."
-#~ msgstr ""
-#~ "Agora é o momento de configura-lo sistema de fiestras X, que é\n"
-#~ "o centro da interface gráfica de Linux. Para iso necesita configura-\n"
-#~ "-la súa tarxeta de vídeo e o seu monitor. A maioría deses pasos están\n"
-#~ "automatizados, así que probablemente a súa tarea limitarase a verificar\n"
-#~ "o que se fixo e aceptar a configuración proposta :-)\n"
-#~ "\n"
-#~ "\n"
-#~ "Cando a configuración estea rematada, lanzarase o servidor X\n"
-#~ "(a menos que vostede lle pida a DrakX que non), de xeito que\n"
-#~ "poida comprobar se todo está ben e corresponde ó que desexa.\n"
-#~ "Se non, pode voltar atrás e troca-la configuración; tantas\n"
-#~ "veces como sexa necesario."
-
-#~ msgid ""
-#~ "If something is wrong in X configuration, use these options to correctly\n"
-#~ "configure the X Window System."
-#~ msgstr ""
-#~ "Se algo vai mal coa configuración de X, use estas opcións para "
-#~ "configurar\n"
-#~ "correctamente o sistema X Window."
-
-#~ msgid ""
-#~ "If you prefer to use a graphical login, select \"Yes\". Otherwise, "
-#~ "select\n"
-#~ "\"No\"."
-#~ msgstr ""
-#~ "Se prefire usar un login gráfico, escolla \"Si\". Doutro xeito,\n"
-#~ "seleccione \"Non\"."
-
-#~ msgid ""
-#~ "Your system is going to reboot.\n"
-#~ "\n"
-#~ "After rebooting, your new Mandrake Linux system will load automatically.\n"
-#~ "If you want to boot into another existing operating system, please read\n"
-#~ "the additional instructions."
-#~ msgstr ""
-#~ "O sistema vaise reiniciar.\n"
-#~ "\n"
-#~ "Despois de reiniciar, o seu novo sistema Mandrake Linux cargarase\n"
-#~ "automaticamente. Se vostede quere iniciar outro sistema operativo que xa\n"
-#~ "exista, lea as instruccións adicionais."
-
-#~ msgid "Czech (Programmers)"
-#~ msgstr "Checo (Programadores)"
-
-#~ msgid "Slovakian (Programmers)"
-#~ msgstr "Eslovaco (Programadores)"
-
-#~ msgid "Name of the profile to create:"
-#~ msgstr "Nome do perfil para crear:"
-
-#~ msgid "Write /etc/fstab"
-#~ msgstr "Escribir /etc/fstab"
-
-#~ msgid "Format all"
-#~ msgstr "Formatar todas"
-
-#~ msgid "After formatting all partitions,"
-#~ msgstr "Logo de formatar tódalas particións,"
-
-#~ msgid "all data on these partitions will be lost"
-#~ msgstr "perderanse os datos nesas particións"
-
-#~ msgid "Reload"
-#~ msgstr "Recargar"
-
-#~ msgid ""
-#~ "Do you want to generate an auto install floppy for linux replication?"
-#~ msgstr ""
-#~ "żQuere realmente xerar un disquete de instalación para replicar linux?"
-
-#~ msgid "ADSL configuration"
-#~ msgstr "Configuración de ADSL"
-
-#~ msgid ""
-#~ "With a remote CUPS server, you do not have to configure\n"
-#~ "any printer here; printers will be automatically detected\n"
-#~ "unless you have a server on a different network; in the\n"
-#~ "latter case, you have to give the CUPS server IP address\n"
-#~ "and optionally the port number."
-#~ msgstr ""
-#~ "Cun servidor CUPS remoto, non terá que configurar aquí\n"
-#~ "ningunha impresora, xa que serán detectadas automaticamente,\n"
-#~ "a menos que teńa un servidor nunha rede diferente. Neste\n"
-#~ "caso, terá que indicar o enderezo IP do servidor de CUPS\n"
-#~ "e opcionalmente o número de porto."
-
-#~ msgid "Remote queue"
-#~ msgstr "Fila de impresión remota"
-
-#~ msgid "Profile "
-#~ msgstr "Perfil "
-
-#~ msgid "NetWare"
-#~ msgstr "Impresora Netware"
-
-#~ msgid "Config file content could not be interpreted."
-#~ msgstr "Non foi posible interpretar o contido do ficheiro de configuración."
-
-#~ msgid "Unrecognized config file"
-#~ msgstr "Ficheiro de configuración non recońecido"
-
-#~ msgid "Adapter"
-#~ msgstr "Adaptador"
-
-#~ msgid "Disable network"
-#~ msgstr "Desactivar a rede"
-
-#~ msgid "DSL (or ADSL) connection"
-#~ msgstr "Conexión DSL (ou ADSL)"
-
-#~ msgid "You can specify directly the URI to access the printer with CUPS."
-#~ msgstr ""
-#~ "Pode especificar directamente o URI para acceder á impresora co CUPS."
-
-#~ msgid "Yes, print ASCII test page"
-#~ msgstr "Si, imprimir unha páxina ASCII de proba"
-
-#~ msgid "Yes, print PostScript test page"
-#~ msgstr "Si, imprimir unha páxina PostScript de proba"
-
-#~ msgid "Paper Size"
-#~ msgstr "Tamańo do papel"
-
-#~ msgid "Eject page after job?"
-#~ msgstr "żExtraer a páxina trala impresión?"
-
-#~ msgid "Uniprint driver options"
-#~ msgstr "Opcións do controlador Uniprint"
-
-#~ msgid "Color depth options"
-#~ msgstr "Opcións da profundidade de cor"
-
-#~ msgid "Print text as PostScript?"
-#~ msgstr "żImprimir texto como PostScript?"
-
-#~ msgid "Fix stair-stepping text?"
-#~ msgstr "żCorrixir o efecto escaleira?"
-
-#~ msgid "Number of pages per output pages"
-#~ msgstr "Número de páxinas por páxina de saída"
-
-#~ msgid "Right/Left margins in points (1/72 of inch)"
-#~ msgstr "Marxes dereita/esquerda en puntos (1/72 dunha polgada)"
-
-#~ msgid "Top/Bottom margins in points (1/72 of inch)"
-#~ msgstr "Marxes superior/inferior en puntos (1/72 dunha polgada)"
-
-#~ msgid "Extra GhostScript options"
-#~ msgstr "Opcións extra do Ghostscript"
-
-#~ msgid "Extra Text options"
-#~ msgstr "Opcións extra para texto"
-
-#~ msgid "Reverse page order"
-#~ msgstr "Inverter a orde das páxinas"
-
-#~ msgid "Select Remote Printer Connection"
-#~ msgstr "Seleccionar a conexión á impresora remota"
-
-#~ msgid ""
-#~ "Every printer need a name (for example lp).\n"
-#~ "Other parameters such as the description of the printer or its location\n"
-#~ "can be defined. What name should be used for this printer and\n"
-#~ "how is the printer connected?"
-#~ msgstr ""
-#~ "Cada impresora necesita un nome (por exemplo lp).\n"
-#~ "Pódense definir outros parámetros como a descrición da\n"
-#~ "impresora ou a súa localización. żQue nome quere usar para\n"
-#~ "esta impresora e como está conectada?"
-
-#~ msgid ""
-#~ "Every print queue (which print jobs are directed to) needs a\n"
-#~ "name (often lp) and a spool directory associated with it. What\n"
-#~ "name and directory should be used for this queue and how is the printer "
-#~ "connected?"
-#~ msgstr ""
-#~ "Cada fila de impresión (á que se dirixen os traballos de impresión)\n"
-#~ "necesita un nome (frecuentemente lp) e un directorio spool asociado\n"
-#~ "a el. żQué nome e directorio quere que se utilicen para esta fila e como\n"
-#~ "está conectada a impresora?"
-
-#~ msgid "Name of queue"
-#~ msgstr "Nome da fila"
-
-#~ msgid "Spool directory"
-#~ msgstr "Directorio spool"
-
-#~ msgid "Disable"
-#~ msgstr "Desactivar"
-
-#~ msgid "Enable"
-#~ msgstr "Activar"
-
-#~ msgid ""
-#~ "To enable a more secure system, you should select \"Use shadow file\" "
-#~ "and\n"
-#~ "\"Use MD5 passwords\"."
-#~ msgstr ""
-#~ "Para ter un sistema máis seguro, debería seleccionar \"Usar ficheiro "
-#~ "shadow\"\n"
-#~ "e \"Usar contrasinais MD5\"."
-
-#~ msgid ""
-#~ "If your network uses NIS, select \"Use NIS\". If you don't know, ask "
-#~ "your\n"
-#~ "network administrator."
-#~ msgstr ""
-#~ "Se a súa rede usa NIS, escolla \"Usar NIS\". Se non o sabe, pregúntelle "
-#~ "ó\n"
-#~ "seu administrador de rede."
-
-#~ msgid "yellow pages"
-#~ msgstr "páxinas amarelas (yp)"
-
-#~ msgid "Provider dns 1"
-#~ msgstr "Dns 1 do provedor"
-
-#~ msgid "Provider dns 2"
-#~ msgstr "Dns 2 do provedor"
-
-#~ msgid "How do you want to connect to the Internet?"
-#~ msgstr "żComo quere conectar á Internet?"
-
-#~ msgid "Boot style configuration"
-#~ msgstr "Configuración do estilo de arrinque"
-
-#~ msgid "gMonitor"
-#~ msgstr "gMonitor"
-
-#, fuzzy
-#~ msgid ""
-#~ "You can now select some miscellaneous options for your system.\n"
-#~ "\n"
-#~ "* Use hard drive optimizations: this option can improve hard disk "
-#~ "performance but is only for advanced users. Some buggy\n"
-#~ " chipsets can ruin your data, so beware. Note that the kernel has a "
-#~ "builtin blacklist of drives and chipsets, but if\n"
-#~ " you want to avoid bad surprises, leave this option unset.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Choose security level: you can choose a security level for your system. "
-#~ "Please refer to the manual for complete\n"
-#~ " information. Basically, if you don't know what to choose, keep the "
-#~ "default option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Precise RAM if needed: unfortunately, there is no standard method to "
-#~ "ask the BIOS about the amount of RAM present in\n"
-#~ " your computer. As consequence, Linux may fail to detect your amount of "
-#~ "RAM correctly. If this is the case, you can\n"
-#~ " specify the correct amount or RAM here. Please note that a difference "
-#~ "of 2 or 4 MB between detected memory and memory\n"
-#~ " present in your system is normal.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Removable media automounting: if you would prefer not to manually mount "
-#~ "removable media (CD-Rom, floppy, Zip, etc.) by\n"
-#~ " typing \"mount\" and \"umount\", select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Clean \"/tmp\" at each boot: if you want delete all files and "
-#~ "directories stored in \"/tmp\" when you boot your system,\n"
-#~ " select this option.\n"
-#~ "\n"
-#~ "\n"
-#~ "* Enable num lock at startup: if you want NumLock key enabled after "
-#~ "booting, select this option. Please note that you\n"
-#~ " should not enable this option on laptops and that NumLock may or may "
-#~ "not work under X."
-#~ msgstr ""
-#~ "Vostede pode agora escoller algunhas opcións diversas para o sistema.\n"
-#~ "\n"
-#~ " - Usar optimizacións de disco duro: esta opción pode mellora-lo "
-#~ "rendemento\n"
-#~ " do disco duro, pero é só para usuarios avanzados: algúns chipsets que "
-#~ "non\n"
-#~ " funcionan ben poden estraga-los seus datos. O kernel ten unha lista "
-#~ "negra\n"
-#~ " de unidades e chipsets, pero se quere evitar sorpresas "
-#~ "desagradables,\n"
-#~ " deixe esta opción desactivada.\n"
-#~ "\n"
-#~ " - Escoller un nivel de seguridade: pode escoller un nivel de "
-#~ "seguridade\n"
-#~ " para o seu sistema. Vaia ó manual para información completa. "
-#~ "Basicamente:\n"
-#~ " se non sabe cal, escolla \"Medio\"; se quere realmente ter unha "
-#~ "máquina\n"
-#~ " segura, escolla \"Paranoico\", pero teńa coidado: ĄNESTE NIVEL, ROOT "
-#~ "NON\n"
-#~ " PODE FACER LOGIN NA CONSOLA! Se quere ser root, terá que facer login "
-#~ "como\n"
-#~ " usuario e entón usar \"su\". Máis xeralmente, non agarde usa-la súa\n"
-#~ " máquina para outra cousa que non sexa un servidor. Xa foi avisado.\n"
-#~ "\n"
-#~ " - Tamańo exacto da memoria se se necesita: por desgracia, no mundo "
-#~ "actual\n"
-#~ " de PCs, non hai un método estándar para preguntarlle á BIOS acerca "
-#~ "da\n"
-#~ " cantidade de RAM no seu ordenador. Por iso, Linux pode non ser capaz "
-#~ "de\n"
-#~ " detectar correctamente a cantidade de RAM. Se é o caso, indique a\n"
-#~ " cantidade correcta. Nota: unha diferencia de 2 ou 4 MB é normal.\n"
-#~ "\n"
-#~ " - Automonta-las unidades extraíbles: Se vostede prefere non montar\n"
-#~ " manualmente as unidades extraíbles (CD-ROM, disquete, Zip), "
-#~ "escribindo\n"
-#~ " \"mount\" e \"umount\", escolla esta opción.\n"
-#~ "\n"
-#~ " - Activar Bloq Num ó iniciar: Se quere que Bloq Num estea activado\n"
-#~ " tralo arrinque, escolla esta opción (Nota: Bloq Num pode ou non pode\n"
-#~ " funcionar nas X)."
-
-#~ msgid "Miscellaneous"
-#~ msgstr "Varios"
-
-#~ msgid "Automatic dependencies"
-#~ msgstr "Dependencias automáticas"
-
-#~ msgid "Selected size %d%s"
-#~ msgstr "Tamańo seleccionado %d%s"
-
-#~ msgid "Miscellaneous questions"
-#~ msgstr "Preguntas varias"
-
-#~ msgid "Can't use supermount in high security level"
-#~ msgstr "Non se pode usar o supermount no nivel de seguridade alto"
-
-#~ msgid ""
-#~ "beware: IN THIS SECURITY LEVEL, ROOT LOGIN AT CONSOLE IS NOT ALLOWED!\n"
-#~ "If you want to be root, you have to login as a user and then use \"su\".\n"
-#~ "More generally, do not expect to use your machine for anything but as a "
-#~ "server.\n"
-#~ "You have been warned."
-#~ msgstr ""
-#~ "atención: NESTE NIVEL DE SEGURIDADE, A AUTENTICACIÓN DO ROOT NA CONSOLA\n"
-#~ "NON ESTÁ PERMITIDA! Se quere ser root, terá que conectar coma\n"
-#~ "usuario e logo usar o \"su\". De xeito máis xeral, non agarde que a\n"
-#~ "máquina actúe doutro modo distinto a un servidor.\n"
-#~ "Xa foi avisado."
-
-#~ msgid ""
-#~ "Be carefull, having numlock enabled causes a lot of keystrokes to\n"
-#~ "give digits instead of normal letters (eg: pressing `p' gives `6')"
-#~ msgstr ""
-#~ "Teńa coidado, ter o bloqueo numérico activado causa que moitas teclas\n"
-#~ "dean díxitos en vez de letras normais (p.ex: premer `p' dá un `6')"
-
-#~ msgid "Sorry, the mail configuration is not yet implemented. Be patient."
-#~ msgstr ""
-#~ "Desculpe, a configuración do correo aínda non está implementada. Sexa "
-#~ "paciente."
-
-#~ msgid ""
-#~ "Welcome to The Network Configuration Wizard.\n"
-#~ "Which components do you want to configure?\n"
-#~ msgstr ""
-#~ "Benvido ó axudante da configuración de rede.\n"
-#~ "żQue compońentes desexa configurar?\n"
-
-#~ msgid "Internet/Network access"
-#~ msgstr "Acceso a Internet/Rede"
-
-#~ msgid ""
-#~ "Now that your Internet connection is configured,\n"
-#~ "your computer can be configured to share its Internet connection.\n"
-#~ "Note: you need a dedicated Network Adapter to set up a Local Area Network "
-#~ "(LAN).\n"
-#~ "\n"
-#~ "Would you like to setup the Internet Connection Sharing?\n"
-#~ msgstr ""
-#~ "Agora que a conexión á Internet está configurada,\n"
-#~ "o seu ordenador pode ser configurado para compartila.\n"
-#~ "Nota: Necesita un adaptador de rede dedicado para configurar unha rede de "
-#~ "área local (LAN).\n"
-#~ "\n"
-#~ "żDesexa configurar a compartición da conexión á Internet?\n"
-
-#~ msgid "This startup script try to load your modules for your usb mouse."
-#~ msgstr ""
-#~ "Este script de inicialización tenta cargar os módulos para o rato usb."
-
-#~ msgid "Configure LILO/GRUB"
-#~ msgstr "Configuración do LILO/GRUB"
-
-#~ msgid "Create a boot floppy"
-#~ msgstr "Creación dun disquete de arrinque"
-
-#~ msgid "Choice"
-#~ msgstr "Escolla"
-
-#~ msgid "Actions"
-#~ msgstr "Accións"
-
-#~ msgid "Scientific applications"
-#~ msgstr "Aplicacións científicas"
-
-#~ msgid "File/Print/Samba"
-#~ msgstr "Ficheiro/Impresión/Samba"
-
-#~ msgid "DNS/DHCP "
-#~ msgstr "DNS/DHCP "
-
-#~ msgid "Which bootloader(s) do you want to use?"
-#~ msgstr "żQue cargador(es) de arrinque quere usar?"
-
-#~ msgid "loopback"
-#~ msgstr "loopback"
-
-#~ msgid "Configure timezone"
-#~ msgstr "Zona horaria"
-
-#~ msgid "Auto install floppy"
-#~ msgstr "Disquete de auto-instalación"
-
-#~ msgid "Use diskdrake"
-#~ msgstr "Usar diskdrake"
-
-#~ msgid "Customized"
-#~ msgstr "Personalizada"
-
-#~ msgid ""
-#~ "Are you sure you are an expert? \n"
-#~ "You will be allowed to make powerful but dangerous things here.\n"
-#~ "\n"
-#~ "You will be asked questions such as: ``Use shadow file for passwords?'',\n"
-#~ "are you ready to answer that kind of questions?"
-#~ msgstr ""
-#~ "żEstá seguro de que é un experto? \n"
-#~ "Permitiráselle facer cousas máis potentes pero perigosas.\n"
-#~ "Vánselle preguntar cuestións como: ``żUsar ficheiro shadow para os "
-#~ "contrasinais?'', żestá preparado para responder a este tipo de cuestións?"
-
-#~ msgid "What is your system used for?"
-#~ msgstr "żCal é o uso do seu sistema?"
-
-#~ msgid "Select the size you want to install"
-#~ msgstr "Escolla o tamańo que quere instalar"
-
-#~ msgid "Use shadow file"
-#~ msgstr "Usar ficheiro shadow"
-
-#~ msgid "MD5"
-#~ msgstr "MD5"
-
-#~ msgid "Use MD5 passwords"
-#~ msgstr "Usar contrasinais MD5"
-
-#~ msgid "(may cause data corruption)"
-#~ msgstr "(pode provocar corrupción dos datos)"
-
-#~ msgid "Enable num lock at startup"
-#~ msgstr "Activar Bloq Num ó iniciar"
-
-#~ msgid "Confirm Password"
-#~ msgstr "Confirmar Contrasinal"
-
-#~ msgid "I have found an ISDN Card:\n"
-#~ msgstr "Atopouse unha tarxeta RDSI:\n"
-
-#~ msgid "Try to find a modem?"
-#~ msgstr "żDesexa que se tente atopar un módem?"
-
-#~ msgid "Other countries"
-#~ msgstr "Outros países"
-
-#~ msgid "In which country are you located ?"
-#~ msgstr "żEn que país se atopa vostede?"
-
-#~ msgid "Alcatel modem"
-#~ msgstr "Módem alcatel"
-
-#~ msgid "ECI modem"
-#~ msgstr "Módem ECI"
-
-#~ msgid ""
-#~ "If your adsl modem is an Alcatel one, choose Alcatel. Otherwise, ECI."
-#~ msgstr "Se o seu módem adsl é Alcatel, escolla Alcatel. Doutro xeito, ECI."
-
-#~ msgid "don't use pppoe"
-#~ msgstr "non usar pppoe"
-
-#~ msgid "Disable Internet Connection"
-#~ msgstr "Desactivar a Conexión a Internet"
-
-#~ msgid "Configure the Internet connection / Configure local Network"
-#~ msgstr "Configurar a conexión a Internet / Configurar a Rede local"
-
-#~ msgid ""
-#~ "Local networking has already been configured.\n"
-#~ "Do you want to:"
-#~ msgstr ""
-#~ "A rede local xa foi configurada.\n"
-#~ "Desexa:"
-
-#~ msgid "i18n (important)"
-#~ msgstr "i18n (importante)"
-
-#~ msgid "i18n (very nice)"
-#~ msgstr "i18n (moi bo)"
-
-#~ msgid "i18n (nice)"
-#~ msgstr "i18n (bo)"
-
-#~ msgid "using module"
-#~ msgstr "usando un módulo"
-
-#~ msgid "Search"
-#~ msgstr "Buscar"
-
-#~ msgid "Package"
-#~ msgstr "Paquete"
-
-#~ msgid "Tree"
-#~ msgstr "Árbore"
-
-#~ msgid "Sort by"
-#~ msgstr "Ordenar por"
-
-#~ msgid "Category"
-#~ msgstr "Categoría"
-
-#~ msgid "Installed packages"
-#~ msgstr "Paquetes instalados"
-
-#~ msgid "Available packages"
-#~ msgstr "Paquetes dispońibles"
-
-#~ msgid "Show only leaves"
-#~ msgstr "Amosar só as pólas"
-
-#~ msgid "Expand all"
-#~ msgstr "Expandir todos"
-
-#~ msgid "Collapse all"
-#~ msgstr "Pechar todos"
-
-#~ msgid "Add location of packages"
-#~ msgstr "Engadir localización dos paquetes"
-
-#~ msgid "Update location"
-#~ msgstr "Actualizar lugar"
-
-#~ msgid "Configuration: Add Location"
-#~ msgstr "Configuración: Engadir Lugar"
-
-#~ msgid "Find Package"
-#~ msgstr "Buscar Paquete"
-
-#~ msgid "Find Package containing file"
-#~ msgstr "Buscar paquete que conteńa un ficheiro"
-
-#~ msgid "Toggle between Installed and Available"
-#~ msgstr "Trocar entre Instalado e Dispońible"
-
-#~ msgid "Checking dependencies"
-#~ msgstr "Comprobando dependencias"
-
-#~ msgid "The following packages are going to be uninstalled"
-#~ msgstr "Os seguintes paquetes van ser desinstalados"
-
-#~ msgid "Regexp"
-#~ msgstr "Expr.Reg"
-
-#~ msgid "Which package are looking for"
-#~ msgstr "Que paquetes buscar"
-
-#~ msgid "No match"
-#~ msgstr "Sen coincidencias"
-
-#~ msgid "No more match"
-#~ msgstr "Non hai máis coincidencias"
-
-#~ msgid ""
-#~ "rpmdrake is currently in ``low memory'' mode.\n"
-#~ "I'm going to relaunch rpmdrake to allow searching files"
-#~ msgstr ""
-#~ "rpmdrake está en modo ``baixa memoria''.\n"
-#~ "Vaise reiniciar rpmdrake para permitir a busca de ficheiros"
-
-#~ msgid "Which file are you looking for?"
-#~ msgstr "żQue ficheiro está a buscar?"
-
-#~ msgid "What are looking for?"
-#~ msgstr "żQue está a buscar?"
-
-#~ msgid "Give a name (eg: `extra', `commercial')"
-#~ msgstr "Dea un nome (ex: `extra', `commercial')"
-
-#~ msgid "Directory"
-#~ msgstr "Directorio"
-
-#~ msgid "No cdrom available (nothing in /mnt/cdrom)"
-#~ msgstr "Non hai cdrom dispońible (nada en /mnt/cdrom)"
-
-#~ msgid "URL of the directory containing the RPMs"
-#~ msgstr "URL do directorio que contén os RPMs"
-
-#~ msgid ""
-#~ "For FTP and HTTP, you need to give the location for hdlist\n"
-#~ "It must be relative to the URL above"
-#~ msgstr ""
-#~ "Para FTP e HTTP, ten que indicar o lugar de hdlist\n"
-#~ "Ten que ser relativo á URL anterior"
-
-#~ msgid "Please submit the following information"
-#~ msgstr "Por favor, envíe a seguinte información"
-
-#~ msgid "%s is already in use"
-#~ msgstr "%s xa está en uso"
-
-#~ msgid "Updating the RPMs base"
-#~ msgstr "Actualizando a base de RPMs"
-
-#~ msgid "Going to remove entry %s"
-#~ msgstr "Vaise borra-la entrada %s"
-
-#~ msgid "Finding leaves"
-#~ msgstr "Buscando as pólas"
-
-#~ msgid "Finding leaves takes some time"
-#~ msgstr "A busca das pólas leva un tempo"
-
-#~ msgid "Graphics Manipulation"
-#~ msgstr "Manipulación de Gráficos"
-
-#~ msgid "KDE, QT, Gnome, GTK+"
-#~ msgstr "KDE, QT, Gnome, GTK+"
-
-#~ msgid "Python, Perl, libraries, tools"
-#~ msgstr "Python, Perl, bibliotecas, ferramentas"
-
-#~ msgid "Development applications"
-#~ msgstr "Aplicacións de desenvolvemento"
-
-#~ msgid "Sciences"
-#~ msgstr "Ciencias"
-
-#~ msgid ""
-#~ "Chat (IRC or instant messaging) programs such as xchat, licq, gaim, and "
-#~ "file transfer tools"
-#~ msgstr ""
-#~ "Programas de Chat (IRC ou mensaxería instantánea) como o xchat, licq, "
-#~ "gaim e ferramentas de transferencia de ficheiros"
-
-#~ msgid "Communication facilities"
-#~ msgstr "Facilidades de Comunicación"
-
-#~ msgid "KDE"
-#~ msgstr "KDE"
-
-#~ msgid "Gnome"
-#~ msgstr "Gnome"
-
-#~ msgid "Development other"
-#~ msgstr "Outros de desenvolvemento"
-
-#~ msgid "Databases clients and servers (mysql and postgresql)"
-#~ msgstr "Clientes e servidores de Bases de Datos (mysql e postgresql)"
-
-#~ msgid "Development C/C++"
-#~ msgstr "Desenvolvemento en C/C++"
-
-#~ msgid "Czech"
-#~ msgstr "Checo"
-
-#~ msgid "Which serial port is your mouse connected to?"
-#~ msgstr "żA qué porto serie está conectado o rato?"
diff --git a/perl-install/share/po/help_xml2pm.pl b/perl-install/share/po/help_xml2pm.pl
deleted file mode 100755
index 932b5943f..000000000
--- a/perl-install/share/po/help_xml2pm.pl
+++ /dev/null
@@ -1,218 +0,0 @@
-#!/usr/bin/perl -w
-
-use XML::Parser;
-use MDK::Common;
-
-my $help;
-my $dir = "doc/manual/literal/drakx";
-my $xsltproc = "/usr/bin/xsltproc";
-
-if ( ! -x "$xsltproc" ){
- print "You need to have \"$xsltproc\" - ";
- print "so type \"urpmi libxslt-proc\" please.\n";
- exit 1;
-}
-my @langs = grep { /^..$/ && -e "$dir/$_/drakx-help.xml" } all($dir) or die "no XML help found in $dir\n";
-
-my %helps = map {
- my $lang = $_;
- my $p = new XML::Parser(Style => 'Tree');
- open F, "$xsltproc id.xsl $dir/$lang/drakx-help.xml|";
- my $tree = $p->parse(*F);
-
- $lang => rewrite2(rewrite1(@$tree), $lang);
-} @langs;
-
-my $base = delete $helps{en} || die;
-save_help($base);
-
-foreach my $lang (keys %helps) {
- print "Now transforming: $lang\n";
- local *F;
- my ($charset) = cat_("$lang.po") =~ /charset=([^\\]+)/ or die "missing charset in $lang.po\n";
- open F, "| iconv -f utf8 -t $charset//TRANSLIT > help-$lang.pot";
- #open F, "|cat - > help-$lang.pot";
- print F "\n";
- foreach my $id (keys %{$helps{$lang}}) {
- $base->{$id} or die "$lang:$id doesn't exist in english\n";
- print F qq(# DO NOT BOTHER TO MODIFY HERE, SEE:\n# cvs.mandrakesoft.com:/cooker/doc/manual/literal/drakx/$lang/drakx-help.xml\n);
- print F qq(msgid ""\n");
- print F join(qq(\\n"\n"), split "\n", $base->{$id});
- print F qq("\nmsgstr ""\n");
- print F join(qq(\\n"\n"), split "\n", $helps{$lang}{$id});
- print F qq("\n\n);
- }
-}
-unlink(".memdump");
-
-sub save_help {
- my ($help) = @_;
- local *F;
- open F, "| LC_ALL=fr iconv -f utf8 -t ascii//TRANSLIT > ../../help.pm";
- print F q{package help;
-use common;
-
-# IMPORTANT: Don't edit this File - It is automatically generated
-# from the manuals !!!
-# Write a mail to <documentation@mandrakesoft.com> if
-# you want it changed.
-
-%steps = (
-empty => '',
-};
- print F qq(
-$_ =>
-__("$help->{$_}"),
-) foreach sort keys %$help;
- print F ");\n";
-}
-
-# i don't like the default tree format given by XML::Parser,
-# rewrite it in my own tree format
-sub rewrite1 {
- my ($tag, $tree) = @_;
- my ($attr, @nodes) = @$tree;
- my @l;
- while (@nodes) {
- my ($tag, $tree) = splice(@nodes, 0, 2);
- if ($tag eq '0') {
- foreach ($tree) {
- s/\s+/ /gs;
- s/"/\\"/g;
- }
- push @l, $tree
- } elsif ($tag eq 'screen') {
- $tree->[1] eq '0' or die "screen tag contains non CDATA\n";
- push @l, $tree->[2];
- } else {
- push @l, rewrite1($tag, $tree);
- }
- }
- { attr => $attr, tag => lc $tag, children => \@l };
-}
-
-# return the list of nodes named $tag
-sub find {
- my ($tag, $tree) = @_;
- if (!ref($tree)) {
- ();
- } elsif ($tree->{tag} eq $tag) {
- $tree;
- } else {
- map { find($tag, $_) } @{$tree->{children}};
- }
-}
-
-sub rewrite2 {
- use utf8;
- my ($tree, $lang) = @_;
- our $i18ned_open_text_quote = $ {{
- fr => " ",
- de => "„",
- es => "\\\"",
- it => "''",
- }}{$lang};
- our $i18ned_close_text_quote = $ {{
- fr => " ",
- de => "“",
- es => "\\\"",
- it => "''",
- }}{$lang};
- our $i18ned_open_label_quote = $ {{ fr => "« ", de => "„"}}{$lang};
- our $i18ned_close_label_quote = $ {{ fr => " »", de => "“"}}{$lang};
- our $i18ned_open_command_quote = $ {{ fr => "« ", de => "„"}}{$lang};
- our $i18ned_close_command_quote = $ {{ fr => " »", de => "“"}}{$lang};
- our $i18ned_open_input_quote = $ {{ fr => " ", de => ""}}{$lang};
- our $i18ned_close_input_quote = $ {{ fr => " ", de => ""}}{$lang};
- our $i18ned_open_key_quote = $ {{ de => "["}}{$lang};
- our $i18ned_close_key_quote = $ {{ de => "]"}}{$lang};
- # rewrite2_ fills in $help
- $help = {};
- rewrite2_($tree);
- $help;
-}
-
-sub rewrite2_ {
- my ($tree) = @_;
- ref($tree) or return $tree;
-
- my $text = do {
- my @l = map { rewrite2_($_) } @{$tree->{children}};
- my $text = "";
- foreach (grep { !/^\s*$/ } @l) {
- s/^ // if $text =~ /\s$/;
- $text =~ s/ $// if /^\s/;
- $text =~ s/\n+$// if /^\n/;
- $text .= $_;
- }
- $text;
- };
-
- if (0) {
- } elsif (member($tree->{tag}, 'formalpara', 'para', 'itemizedlist', 'orderedlist')) {
- $text =~ s/^\s(?!\s)//;
- $text =~ s/^( ?\n)+//;
- $text =~ s/\s+$//;
- qq(\n$text\n);
- } elsif (member($tree->{tag}, 'quote', 'citetitle', 'foreignphrase')) {
- ($i18ned_open_text_quote || "``") . $text . ($i18ned_close_text_quote || "''");
- } elsif (member($tree->{tag}, 'guilabel', 'guibutton', 'guimenu', 'literal', 'filename')) {
- ($i18ned_open_label_quote || "\\\"") . $text . ($i18ned_close_label_quote || "\\\"");
- } elsif ($tree->{tag} eq 'command') {
- ($i18ned_open_command_quote || "\\\"") . $text . ($i18ned_close_command_quote || "\\\"");
- } elsif ($tree->{tag} eq 'userinput') {
- ($i18ned_open_input_quote || ">>") . $text . ($i18ned_close_input_quote || "<<");
- } elsif ($tree->{tag} eq 'keycap') {
- ($i18ned_open_key_quote || "[") . $text . ($i18ned_close_key_quote || "]");
- } elsif (member($tree->{tag}, 'keysym')) {
- qq($text);
- } elsif (member($tree->{tag}, 'footnote')) {
- '(*)'
- } elsif ($tree->{tag} eq 'warning') {
- $text =~ s/^(\s+)/$1!! /;
- $text =~ s/(\s+)$/ !!$1/;
- $text;
- } elsif ($tree->{tag} eq 'listitem') {
- my $cnt;
- $text =~ s/^\s+//;
- $text =~ s/^/' ' . ($cnt++ ? ' ' : '* ')/emg;
- "\n$text\n";
-
- } elsif (member($tree->{tag},
- 'acronym', 'application', 'emphasis',
- 'keycombo', 'note',
- 'superscript', 'systemitem',
- 'tip', 'ulink', 'xref'
- )) {
- # ignored tags
- $text;
- } elsif (member($tree->{tag},
- 'title', 'article', 'primary', 'secondary',
- 'indexterm',
- )) {
- # dropped tags
- '';
- } elsif ($tree->{tag} eq 'sect1') {
- $text =~ s/^\s+//;
-
- my @footnotes = map {
- my $s = rewrite2_({ %$_, tag => 'para' });
- $s =~ s/^\s+//;
- "(*) $s";
- } find('footnote', $tree);
- $help->{$tree->{attr}{id}} = aerate($text . join('', @footnotes));
- '';
- } elsif ($tree->{tag} eq 'screen') {
- qq(\n$text\n);
- } else {
- die "unknown tag $tree->{tag}\n";
- }
-}
-
-sub aerate {
- my ($s) = @_;
- #- the warp_text column is adjusted so that xgettext do not wrap text around
- #- which cause msgmerge to add a lot of fuzzy
- my $s2 = join("\n\n", map { join("\n", warp_text($_, 75)) } split "\n", $s);
- $s2;
-}
diff --git a/perl-install/share/po/hr.po b/perl-install/share/po/hr.po
deleted file mode 100644
index 20347847b..000000000
--- a/perl-install/share/po/hr.po
+++ /dev/null
@@ -1,11819 +0,0 @@
-# KTranslator Generated File
-# Copyright (c) 1999 MandrakeSoft
-# Vladimir Vuksan <vuksan@veus.hr>, 1999.
-# Vlatko Kosturjak <kost@iname.com>, 2001.
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 06:59CET\n"
-"Last-Translator: Vlatko Kosturjak <kost@iname.com>\n"
-"Language-Team: Croatian <lokalizacija@linux.hr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.8\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "Podesi sve zaslone nezavisno"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama proširenje"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Podesi samo karticu \"%s\" (%s)"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "Više-zaslonska postava"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Vaš sustav podržava postavu sa više zaslona.\n"
-"Što želite napraviti?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafička kartica"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Odaberite grafičku karticu"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Odaberite X poslužitelj"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X poslužitelj"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Odaberite X upravljački program"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X upravljački program"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Koju konfiguraciju XFree-a želite imati?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaša video kartica može imati 3D ubrzanje samo sa XFree %s.\n"
-"Vaša kartica je podržana od XFree %s koji možda ima bolju podršku u 2D."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Vaša kartica može imati 3D hardware-sku akceleraciju sa XFree %s."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s sa 3D hardware akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Vaša kartica može imati 3D hadware akceleraciju podržanu od XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODRŠKA I MOŽE ZAMRZNUTI VAŠE "
-"RAČUNALO."
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s sa EXPERIMENTALNOM 3D hardware akceleracijom"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Vaša video kartica može imati 3D ubrzanje samo sa XFree %s,\n"
-"UPOZORAVAMO VAS DA JE OVO EKSPERIMENTALNA PODRŠKA I MOŽE ZAMRZNUTI VAŠE "
-"RAČUNALO.Vaša kartica je podržana od XFree %s koja može imati bolju podršku "
-"u 2D."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (instalacijski zaslonski upravljački program)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree postavke"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Odaberite količinu memorije na grafičkoj kartici"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Postavke poslužitelja"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "Odaberite monitor"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritična parametra su vertikalna vrijednost osvježavanja, koja je "
-"vrijednost\n"
-"u kojoj se cijeli zaslon osvježava, i najvažnije horizontalna\n"
-"vrijednost osvježavanja koja ja vrijednost u kojoj se svaka linija "
-"prikazuje.\n"
-"\n"
-"JAKO JE VAŽNO da ne specifirate tip monitora kod kojega je raspon "
-"osvježavanja\n"
-"veći od mogućnosti vašeg monitora jer možete oštetiti vaš monitor.\n"
-" Ukoliko ste u nedoumici, izaberite konzervativne postavke."
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Horizontalna vrijednost osvježavanja"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Vertikalna vrijednost osvježavanja"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "Niste podesili monitor"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "Niste podesili grafičku karticu"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "Niste podesili rezoluciju"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Da li želite iskušati postavu ?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje grafičke kartice može zamrzunti vaše računalo"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "Iskušaj postavu"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"provjerite parametre koje ste unjeli"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Pojavila se greška:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Zatvaram nakon %d sekundi"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Pojavila se greška, provjerite parametre koje ste unjeli"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Odaberite rezoluciju i color depth"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafička kartica: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86 poslužitelj: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Više"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "U redu"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Pokaži sve"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Rezolucije"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tipkovnice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Vrsta miša: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Uređaj miša: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontalna Sinkronizacija Monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikalno Osvježenje Monitora: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "Grafička kartica: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "Identifikacija grafičke kartice: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "Grafička memorija: %s kB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dubina boje: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 poslužitelj: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 upravljački program: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Pripremam X-Window postavu"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Što želite napraviti?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "Promijeni monitor"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "Promijeni grafičku karticu"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Promijeni postavke poslužitelja"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "Promijeni rezoluciju"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Prikaži informacije"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Iskušaj ponovo"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Završi"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zadrži promjene?\n"
-"Trenutna postava je:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "X kod pokretanja sustava"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Mogu podesiti da se X podigne automatski kod podizanja sustava.\n"
-"Da li želite da se X automatski pokreće?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Molim ponovo se logirajte u %s kako bi aktivirali promjenjeno"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molim prvo se odjavite te pritisnite Ctrl-Alt-BackSpace"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisuća boja (15 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisuća boja (16 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 milijuna boja (24 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milijarde boja (32 bita)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 kB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB ili više"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standardni VGA, 640x480 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514 kompatibilan, 1024x768 na 87 Hz s preplitanjem (bez 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768 na 87 Hz s preplitanjem, 800x600 na 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Prošireni Super VGA, 800x600 na 60 Hz, 640x480 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Bez preplitanja SVGA, 1024x768 na 60 Hz, 800x600 na 72 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Visoko frekvencijski SVGA, 1024x768 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 74 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multi-frekvencijski koji ide do 1280x1024 na 76 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Monitor koji ide do 1600x1200 na 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Monitor koji ide do 1600x1200 na 76 Hz"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "Prvi sektor boot particije"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor pogona (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "SILO instalacija"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje želite instalirati bootloader?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafičkim menijem"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Podizanje sa DOS/Windows-a (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Glavne postavke bootloadera"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "Koristiti Bootloader"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "Bootloader instalacija"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Boot uređaj"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (ne radi na starim BIOSima)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Zbijeno"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "zbijeno"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Video mod"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Odgoda prije bootiranja uobičajenog imagea"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Lozinka"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Lozinka (provjera)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "Ograničene opcije na komandnoj liniji"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "ograniči"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "Očisti /tmp na svakom podizanju"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veličina RAMa (pronađeno %d MB)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Omogući više obrazaca"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "Upišite veličinu RAM u Mb"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Postavka ``Ograničene opcije na komandnoj liniji'' nema svrhe ako ne unesete "
-"lozinku"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Molim pokušajte ponovo"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "Lozinke se ne podudaraju"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Init poruka"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Pauza Otvorenog Firmware-a"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Vrijeme čekanja podizanja kernela"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "Omogući CD podizanje?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "Omogući podizanje?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Uobičajeni OS?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Odlučili ste instalirati bootloader na particiju.\n"
-"To podrazumijeva da već imate bootloader na tvrdom disku sa kojeg podižete\n"
-"sustav (npr. System Commander).\n"
-"\n"
-"Sa kojeg diska želite podizati?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Ovo su trenutni zapisi.\n"
-"Možete dodati još koji ili urediti postojeći."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Dodaj"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Gotov"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Promjeni"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Kakvu vrstu zapisa želite dodati"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Drugi OS (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Drugi OS (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Drugi OS (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Slika (image)"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Dodaj na kraj"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Čitaj-piši"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tablica"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nesigurno"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Oznaka"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Uobičajeno"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "Initrd-veličina"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NemaVidea"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Ukloni zapis"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Morate odrediti sliku kernela"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Morate odrediti root particiju"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Ova oznaka već postoji"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "Pronašao sam %s %s međusklopova"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Da li imate još koji?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Da li imate %s međusklopova?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Ne"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Da"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "Pokaži info o hardveru"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram upravljački program %s za karticu %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s upravljački program želite isprobati?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slučajevima, %s upravljački program treba dodatne informacije da bi "
-"radio\n"
-"ispravno, iako normalno radi i bez toga. Da li želite specifirati te "
-"dodatne\n"
-"opcije za njega ili želite dozvoliti upravljačkom programu da isproba vaše\n"
-"računalo za informacije koje treba? Ponekad, isprobavanje može zamrznuti\n"
-"vaše računlo, ali ne bi trebalo izazvati nikakvu štetu."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Auto. ispitaj"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Odredi postavke"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sada možete unijeti opcije za modul %s.\n"
-"Primjetite da svaka adresa treba biti unešena sa prefiksom 0x kao '0x123'"
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada možete unijeti postavke za modul %s.\n"
-"Postavke su formata ``ime=vrijednost ime2=vrijednost2...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "Postavke modula:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Učitavanje modula %s nije uspjelo.\n"
-"Da li želite pokušati ponovo sa drugim parametrima?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "pristup X programima"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "pristup administracijskim datotekama"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(već postoji %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Lozinka je prejednostavna"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Molim dajte korisniku korisničko ime"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisničko ime može sadržavati samo mala slova, brojeve, `-' i `_'"
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Ovaj korisnik već postoji"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesite korisnika\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Puno ime"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Korisničko ime"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Ljuska"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikona"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Auto-prijava"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Mogu podesiti da se vaše računalo automatski prijavi kao jedan korisnik.\n"
-"Da li želite koristiti tu pogodnost?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Izaberite uobičajenog korisnika:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Izaberite prozorski upravitelj koji želite pokrenuti:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Molim izaberite jezik koji želite koristiti."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Možete izabrati druge jezike koji će biti dostupni nakon instalacije"
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Sve"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Prilagođeno"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nema dijeljenja"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba instalirati. Da li ga želite instalirati?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr "Možete izvesti koristeći NFS ili Sambu. Koji od njih želite"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nužni paket %s nedostaje"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Da li želite dozvoliti korisnicima da izvezu neke direktorije u "
-"njihivompolaznom direktoriju?\n"
-"Dozvoljavanjem navedenoga ćete dozvoliti korisnicima da jednostavno kliknuna "
-"\"Dijeljenje\"\n"
-" u konqueroru i nautilusu.\n"
-"\n"
-"\"Proizvoljno\" će omogućiti dozvoljavanje po korisniku.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Odustani"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"Dijeljenje po korisniku koristi grupu \"fileshare\". \n"
-"Možete koristiti userdrake za dodavanje korisnika u navedenu grupu."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Dobrodošli Crackeri"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Slab"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Standardno"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Visok"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Viši"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoidan"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ova razina se treba koristiti sa pažnjom. Ona čini vaš sustav mnogo lakšim "
-"za korištenje,\n"
-"ali vrlo osjetljiv: ne smije biti korišten za računala koja su povezana u "
-"mreži ili na Internet. Naime, nema lozinke za pristup."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Lozinke su sada uključene međutim još ne preporučam korištenje ovog računala "
-"u mrežnom okolišu."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ovo je standardna sigurnosna razina preporučena za računala koja će biti "
-"korištena za spajanje na Internet kao klijent."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Već postoje neka ograničenja i više automatskih provjera se pokreće svake "
-"noći."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Sa ovom sigurnosnom razinom, korištenje ovog sustava kao poslužitelj postaje "
-"moguće.\n"
-"Sigurnost je sada toliko visoka da se sustav može koristiti kao poslužitelj\n"
-"koji prima zahtjeve od mnogo klijenata. Upozorenje: ako je vaše računalo "
-"samo klijent na Internetu, bolje da izaberete nižu razinu."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Temeljeno na prijašnjoj razini, ali je sustav potpuno zatvoren.\n"
-"Sigurnosne značajke su na maksimumu."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Izaberite sigurnosni nivo"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Sigurnosna razina"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za poslužitelje"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Biblioteka koja štiti od prekoračenja spremnika i format string napada."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Dobro dosli u %s izbornik operativnih sustava!\n"
-"\n"
-"Izaberite operativni sustav u popisu iznad ili\n"
-"pričekajte %d sekundi za uobičajeno podizanje.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Dobro dosli u GRUB izbornik operativnih sustava!"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Za mijenjanje izabranog sustava pritisnite tipke %c i %c."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Pritisnite ENTER za bootiranje izabranog OS, 'e' za promjenu"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "naredbe prije bootiranja ili 'c' za komandnu liniju."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Osvjetljeni zapis biti će bootiran automatski za %d sekundi."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nema dovoljno mjesta u /boot"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Radna površina"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start Menu"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Ne možete instalirati bootloader na %s particiju\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "nema još implementirane pomoći.\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Novi stil kategoriziranja Monitora"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "NoviStil Monitora"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Tradicionalni Monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Tradicionalni Gtk+ Monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Pokreni Auroru pri podizanju"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub mod"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mod"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Trenutno koristite %s kao Upravitelj Boot-a.\n"
-"Pritisnite na Podesi za pokretanje čarobnjaka za postavljanje."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Podesi"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Sistemski mod"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Pokreni X-Window sustav pri podizanju"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne, ne želim automatsko prijavljivanje"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Da, želim automatsko prijavljivanje sa ovim korisnikom i okružjem"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "U redu"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "ne mogu otvoriti /etc/inittab za čitanje: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Ne mogu napraviti screenshotove prije particioniranja"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Screenshotovi će biti raspoloživi poslije instalaciju u %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Francuska"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Kosta Rika"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgija"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Češka Republika"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Njemačka"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Grčka"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norveška"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Švedska"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Nizozemska"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Italija"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Austrija"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Sjedinjene Američke Države"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Prvo napravite backup podataka"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Pročitajte pažljivo!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ukoliko želite koristiti aboot morate ostaviti dovoljno mjesta (npr. 2048 "
-"sektora) na\n"
-"početku diska"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Greška"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Čarobnjak"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Izaberite akciju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Vaš sustav sadrži samo jednu veliku particiju.\n"
-"(Microsoft DOS/Windows obično koristi jednu particiju).\n"
-"Preporučam da promijenite veličinu particije\n"
-"(kliknite prvo na particiju te onda na \"Promijeni veličinu\")"
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Molim kliknite na particiju"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Detalji"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Prazno"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Ostali"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Vrste datotečnih sustava:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Napravi"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Vrsta"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Umjesto toga koristi ``%s''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Obriši"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Prvo pritisnite ``Demontiraj''"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja tipa particije %s svi podaci na ovoj particiji biti će "
-"obrisani"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Izaberite particiju"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Izaberite drugu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Izlaz"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Normalno > Ekspert"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Vrati"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Da ipak nastavim?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Da završim bez spremanja"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Da završim bez zapisivanje particijske tablice?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Da li želite spremiti /etc/fstab promjene?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Raspodijeli automatski"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Očisti sve"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Hard disk informacije"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su iskorištene"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Ne mogu dodati niti jednu dodatnu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ako želite dodati još koju particiju molim obrišite jednu od particija kako "
-"bi\n"
-"mogli stvoriti jednu extended particiju."
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "Spremi particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "Vrati particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "Spasi particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "Ponovno učitaj particijsku tabelu"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje prenosivog medija"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Odaberite datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup particijske tablice nema istu veličinu\n"
-"Da ipak nastavim?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Umetnite disketu u pogon\n"
-"Svi podaci na disketi biti će izbrisani"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Pokušavam spasiti particijsku tablicu"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Točka montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Opcije"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Promijeni veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Premjesti"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formatiraj"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Montiraj"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Dodaj RAID-u"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Dodaj LVM-u"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAID-a"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVM-a"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "Promijeni RAID"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Stvori novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Početni sektor:"
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Veličina u MB:"
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "Vrsta datotečnog sustava:"
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Mjesto montiranja:"
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Postavke:"
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "Mijenjam tip particije"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Koji datotečni sustav želite?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Mijenjam iz ext2 u ext3"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Gdje želite montirati loopback datoteku %s?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje želite montirati uređaj %s?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu maknuti točku za montiranje zato što se ova particija koristi za "
-"loop back.\n"
-"Uklonite loopback prvo"
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "Izračunavam granice fat datotečnog sustava"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Mijenjam veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ova particija nije promjenjiva u veličini"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Preporučam da prvo backupirate sve podatke s ove particije"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon mijenjanja veličine particije %s svi podaci na ovoj particiji biti će "
-"izgubljeni"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Odaberite novu veličinu"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Nova veličina u MB: "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Na koji disk se želite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Sektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Na koji se sektor želite premjestiti?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Premještam"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Premještam particiju..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeći RAID na koji želite dodati "
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "novi"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeći LVM na koji želite dodati "
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "LVM ime?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ova particija se ne može koristiti za loopback"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "Ime loopback datoteke:"
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Dajte ime datoteke"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Datoteku koristi neki drugi loopback. Molim izaberite neku drugu datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "Datoteka već postoji. Da li da nju upotrijebim?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Razno"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "uređaj"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "razina"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "chunk veličina"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna"
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Kakav tip particioniranja?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Žalim međutim ne mogu napraviti /boot toliko daleko na disku\n"
-"(cilindar > 1024).\n"
-"Imate dvije opcije ili ćete koristiti LILO pa neće raditi ili nećete\n"
-"koristiti LILO pa vam /boot neće ni trebati."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Particiju koju ste odabrali kao root (/) je fizički locirana poslije 1024-"
-"tog cilindra vašeg hard diska, a nemate /boot particiju.\n"
-"Ukoliko planirate koristiti LILO boot menadžer, budite pažljivi da dodate/"
-"boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Izabrali ste softwaresku RAID particiju kao root (/).\n"
-"Nema bootloader-a koji je u mogućnosti to podržati bez /boot particije.\n"
-"Zato budite pažljivi da dodate /boot particiju"
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Particijska tablica pogona %s će sada biti zapisana na disk!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Trebate ponovo pokrenuti sustav prije nego promjene postanu aktivne"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon formatiranja particije %s svi podaci na ovoj particiji biti će obrisani"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formatiram"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Sakrij datoteku"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Premijesti datoteku na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"Direktorij %s već sadrži neke podatke\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Premiješteam datoteke na novu particiju"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je sada poznata kao %s"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Uređaj:"
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS uređaj slovo: %s (nagađanje)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Vrsta: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Ime: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Početak: sektor %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Veličina: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formatiran\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nije formatiran\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Montiran\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Podrazumijevana boot particija\n"
-" (za MS-DOS boot, ne za LILO)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "Razina %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Chunk veličina %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Ime loopback datoteke: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Šanse su, da je ova particija\n"
-"ustvari particija upravljačkog programa, vjerojatno\n"
-"biste ju trebali ostaviti.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova specijalna bootstrap\n"
-"particija je za\n"
-"dvostruko-podizanje (dual-boot) vašeg sustava.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veličina: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Info: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Vrsta particijske tabele: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "na sabirnici %d id %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Ključ enkriptiranja datotečnog sustava"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite vaš ključ za enkriptiranje datotečnog sustava"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Upisani enkripcijski ključ je prejednostavan (mora biti dug najmanje %d "
-"znakova)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "Enkripcijski ključevi se ne slažu"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Enkripcijski ključ"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Enkripcijski ključ (ponovno)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "Promijeni tip"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Molim kliknite na medij"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Poslužitelji za pretraživanje"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ne znam kako formatirati %s kao vrstu %s"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktorij %s neuspješno"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "fsck neuspješan sa izlaznim kodom %d ili signalom %d"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "greška kod demontiranja %s: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "jednostavno"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "sa /usr"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "poslužitelj"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "JFS se ne može koristiti na particijama koje su manje od 16 MB"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "ReiserFS se ne može koristiti na particijama koje su manje od 32 MB"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "Mjesto montiranja mora početi sa /"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Već postoji particija sa mjestom montiranja %s\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Ne možete koristiti LVM logički prostor za mjesto montiranja %s"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij bi trebao ostati unutar root datotečnog sustava"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Treba vam istinski datotečni sustav (ex2, reiserfs) za ovo mjesto "
-"montiranja\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr ""
-"Ne možete koristiti enkriptirani datotečni sustav za točku montiranja %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno slobodnog prostora za auto-alokaciju"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nema ništa za uraditi"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Greška prilikom otvaranja %s za pisanje: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Pojavila se greška - ne mogu pronaći niti jedan valjani uređaj na kojem\n"
-"bih mogao instalirati datotečni sustav. Provjerite da li je sa vašim "
-"hardverom sve u redu."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Nemate niti jednu particiju!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"GNU/Linux je višekorisnički sustav, i to znači da svaki korisnik može imati\n"
-"vlastita podešenja, vlastite datoteke itd. Možete pročitati ``User Guide''\n"
-"da naučite više. Za razliku od \"root\"-a, koji je administrator, korisnici\n"
-"koje ćete dodati ovdje neće imati ovlaštenja za mijenjanje ničega osim "
-"vlastitih\n"
-"datoteka ili vlastitih postavki. Morati ćete napraviti najmanje jednog "
-"normalnog\n"
-"korisnika za vas. Taj račun ćete koristiti za prijavljivanje za rutinsko\n"
-"korištenje. Iako je vrlo praktično se prijaviti kao \"root\" svaki dan,\n"
-"to može biti vrlo opasno! Najmanja pogreška može značiti da vaš sustav\n"
-"neće više moći raditi. Ako napravite ozbiljnu grešku kao normalan korisnik,\n"
-"možete izgubiti samo neke informacije, ali ne cijeli sustav.\n"
-"\n"
-"Prvo, morate unijeti vaše pravo ime. Ono nije obvezno, naravno\n"
-"možete ustvari unijeti što god želite. DrakX će tada uzeti prvu riječ koju\n"
-"ste unijeli u to polje i prenijeti je u \"Korisničko ime\". To je ime kojim "
-"će \n"
-"se taj konkretni korisnik prijavljivati u sustav. Možete ga mijenjati. "
-"Tada \n"
-"morate ovdje upisati lozinku. Sa gledišta sigurnosti, lozinka "
-"neprivilegiranog \n"
-"(običnog) korisnika nije toliko važna kao \"root\" lozinka, ali je ne treba "
-"zbog\n"
-"toga zanemarivati: naposlijetku, radi se o vašim datotekama.\n"
-"\n"
-"Ako pritisnete \"Prihvati korisnika\", možete ih dodati koliko želite. "
-"Dodajte\n"
-"korisnika za svakog prijatelja: oca ili sestru, npr. Kada ste dodali sve "
-"korisnike\n"
-"koje ste željeli, stisnite \"Završi\".\n"
-"\n"
-"Pritiskanjem na \"Napredno\" možete promijeniti predodređenu \"ljusku\" za "
-"tog\n"
-"korisnika (bash je predodređen)."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Gore su popisane postojeće Linux particije pronađene na\n"
-"vašem hard disku. Možete zadržati izbore napravljene od strane čarobnjaka, "
-"one su dobre za\n"
-"uobičajenu upotrebu. Ukoliko promjenite izbore, morate barem definirati "
-"root\n"
-"particiju (\"/\"). Nemojte izabrati premalu particiju jer nećete moći \n"
-"instalirati dovoljno software-a. Ako želite spremati vaše podatke na "
-"posebnoj particiji,\n"
-"trebate također izabrati \"/home\" (jedino moguće ako imate više od jedne\n"
-"raspoložive Linux particije).\n"
-"\n"
-"\n"
-"Za informaciju, svaka particija je popisana kako slijedi: \"Ime\", "
-"\"Kapacitet\".\n"
-"\n"
-"\n"
-"\"Ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", \"b\" znači "
-"\"sekundarni hard disk\", itd..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"Mandrake Linux instalacija je proširena na nekoliko CDROMova. DrakX\n"
-"zna ukoliko se odabrani paket nalazi na drugom CDROMu i izbaciti će\n"
-"trenutni CD i pitati vas da ubacite drugi koji je potreban."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Sada treba odrediti koje programe želite instalirati u svoj sustav. Za "
-"Mandrake \n"
-"Linux su dostupne tisuće paketa, i ne morate ih sve znati na pamet.\n"
-"\n"
-"Ako pokrećete standarnu instalaciju sa CD-ROMa, prvo ćete biti upitani da "
-"navedete\n"
-"CDove koje imate (samo u modu za stručnjake). Provjerite imena CDova i "
-"označite\n"
-"kućice koje odgovaraju CDovima koje imate. Pritisnite \"U redu\" kada ste "
-"spremni\n"
-"nastaviti.\n"
-"\n"
-"Paketi su podijeljeni po grupama koje odgovaraju određenoj svrsi. Grupe su \n"
-"podijeljene u četiri sekcije:\n"
-"\n"
-" * \"Radna stanica\": ako ćete koristiti stroj kao radnu stanicu, izaberite\n"
-"jednu ili više odgovarajućih grupa;\n"
-"\n"
-" * \"Razvoj\": ako će se Vaš stroj koristiti za programiranje, izaberite\n"
-"željene grupe;\n"
-"\n"
-" * \"Poslužitelj\": ako je Vaš stroj određen za poslužitelja, moći ćete "
-"odabrati\n"
-"koje od uobičajenih servisa želite instalirati na njega;\n"
-"\n"
-" * \"Grafičko okružje\": naposlijetku, ovdje birate grafičko okružje. Barem "
-"jedno\n"
-"mora biti odabrano ako želite imati grafičku radnu stanicu!\n"
-"\n"
-"Pomicanjem pokazivača miša na ime grupe će se prikazati kratak opis te "
-"grupe. Ako\n"
-"nijedna grupa nije odabrana pri normalnoj instalaciji (za razliku od "
-"nadogradnje),\n"
-"iskočit će dijalog sa predloženim opcijama za minimalnu instalaciju:\n"
-"\n"
-" * \"Sa Xima\": instaliranje što je manje paketa moguće za grafičko "
-"sučelje;\n"
-"\n"
-" * \"Sa osnovnom dokumentacijom\": instalira osnovni sustav sa osnovnim "
-"pomoćnim\n"
-"programima i njihovom dokumentacijom. Ova instalacija je pogodna za "
-"namještanje\n"
-"poslužitelja;\n"
-"\n"
-" * \"Stvarno malena instalacija\": instalirat će strogi minimum potreban da "
-"bi\n"
-"imali Linux sustav koji radi, samo u komandnoj liniji. Ova instalacija je "
-"velika\n"
-"oko 65Mb.\n"
-"\n"
-"Možete provjeriti \"Inividualni odabir paketa\", što je korisno ako ste "
-"upoznati\n"
-"sa ponuđenim paketima ili ako želite imati potpunu kontrolu nad "
-"instaliranim\n"
-"sadržajem.\n"
-"\n"
-"Ako ste pokrenuli instalaciju u \"Nadogradnja\" načinu, možete odselektirati "
-"sve\n"
-"grupe da izbjegnete instaliranje novih paketa. Ovo je korisno za "
-"popravljanje\n"
-"ili osuvremenjivanje postojećeg sustava."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Konačno, ovisno o tome da li ste izbrali individualne pakete, prikazat će "
-"vam \n"
-"se stablo sa svim paketima podijeljenim u grupe i podgrupe. Pri "
-"pregledavanju\n"
-"stabla možete izabrati čitave grupe, podgrupe ili pojedine pakete.\n"
-"\n"
-"Kad god izaberet paket na stablu, na desnoj strani se pojavi opisnik. Kada "
-"ste\n"
-"završili odabir, pritisnite \"Instaliraj\", čime ćete pokrenuti proces "
-"instaliranja.\n"
-"Ovisno o brzini računala i broju paketa koji trebaju biti instalirani, "
-"proces može\n"
-"potrajati. Procjena vremena koje će biti potrebno da bi se sve instaliralo "
-"piše\n"
-"na ekranu, da vam pomogne procjeniti imate li vremena za šalicu kave.\n"
-"\n"
-"!! Ako je odabran poslužiteljski paket, namjerno ili jer je pripadao nekoj "
-"grupi,\n"
-"bit ćete upitani da potvrdite da li želite stvarno instalirati te "
-"poslužitelje.\n"
-"Kod Mandrake Linuxa, svi instalirani poslužitelji se pokreću prilikom "
-"podizanja\n"
-"sustava. Čak iako su sigurni, bez poznatih problema u vrijeme izlaska "
-"distribucije,\n"
-"može se dogoditi da se otkriju sigurnosne rupe nakon zgotovljenja ove "
-"inačice\n"
-"Mandrake Linuxa. Ako ne znate što bi pojedini servis trebao raditi ili "
-"zašto \n"
-"se instalira, pritisnite \"Ne\". Pritiskanjem na \"Da\"instalirat će se "
-"navedeni\n"
-"servisi i pokretat će se automatski. !!\n"
-"\n"
-"\"Automatske ovisnosti\" opcija onemogućuje upozorenje koje se pojavi kad "
-"god \n"
-"instalacija automatski izabere paket. Ovo se dešava stoga što je utvrdila "
-"da\n"
-"treba zadovoljiti ovisnost drugim paketom da bi se uspješno završila.\n"
-"\n"
-"Malena ikona diskete na dnu popisa omogućuje učitavanje popisa paketa "
-"izabranih\n"
-"tijekom neke prošle instalacije. Pritiskom na nj upitat će vas da ubacite "
-"disketu\n"
-"napravljenu na kraju neke druge instalacije. Pogledajte drugi savjet u "
-"posljednjem\n"
-"koraku stvaranja takve diskete."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Predloženo Vam je da namjestite Internet/mrežnu vezu. Ako želite računalo\n"
-"povezati s Internetom ili lokalnom mrežom, pristisnite \"U redu\". Pokrenut "
-"će\n"
-"se proces automatskog prepoznavanja mrežnih kartica i modema. Ako ovaj "
-"proces\n"
-"zakaže, isključite \"Koristi autodetekciju\" kućicu slijedeći put. Možete\n"
-"odabrati i da ne namještate mrežu, ili da to učinite kasnije; u tom "
-"slučaju, \n"
-"samo stisnite \"Odustani\".\n"
-"\n"
-"Dostupne veze su: obični modem, ISDN modem, ADSL veza, kablovski modem, te\n"
-"jednostavna LAN veza (Ethernet).\n"
-"\n"
-"Ovdje se nećemo detaljno baviti sa pojedinim konfiguracijama. Samo "
-"provjerite da\n"
-"li imate sve parametre od vašeg pružatelja internet usluga ili sustavskog \n"
-"administratora.\n"
-"\n"
-"Možete pogledati u ``User Guide'', poglavlje o Internet vezama za detalje "
-"o \n"
-"postavkama, ili jednostavno sačekati da se sustav instalira, pa koristiti\n"
-"tamo opisani program da bi namjestili vašu vezu.\n"
-"\n"
-"Ako želite namjestiti mrežu kasnije, poslije instalacije, ili ste završili\n"
-"namještanje mreže, stisnite \"Odustani\"."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Sada možete izabrati servise koje želite pokreniti pri podizanju.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi dostupni sa trenutnom instalacijom.\n"
-"Pregledajet ih pažljivo i maknite one koje nisu uvijek potrebni prilikom\n"
-"podizanja sustava.\n"
-"\n"
-"Odabiranjem određenog servisa dobit ćete kratki opis tog servisa. Međutim, "
-"ako\n"
-"niste sigurni je li servis koristan ili ne, sigurnije je ostaviti "
-"predodređeno\n"
-"ponašanje.\n"
-"\n"
-"!! Na ovoj razini obratite pozornost na to da li ćete koristiti stroj kao\n"
-"poslužitelj: vjerojatno ne želite pokretati neke servise koje ne trebate.\n"
-"Prisjetite se da neki servisi mogu biti opasni ako su pokrenuti na "
-"poslužitelju.\n"
-"Općenito, izaberite samo one servise koji vam stvarno trebaju.\n"
-"!!"
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"GNU/Linux upravlja vremenom po GMTu (Greenwich Mean Time) i prevodi ga u\n"
-"lokalno vrijeme prema vremenskoj zoni koju ste izabrali. Moguće je, doduše,\n"
-"ovo isključiti isključivanjem odabira \"Hardverski sat namješten na GMT\" "
-"tako\n"
-"da je hardverski sat jednak sustavskom. Ovo je korisno kada se na računalu\n"
-"nalazi drugi operacijski sustav, poput Windows.\n"
-"\n"
-"Opcija \"Automatska sinhronizacija vremena\" će automatski podešavati sat\n"
-"tako da će se povezivati sa vremenskim poslužiteljem na Internetu. Sa "
-"popisa\n"
-"izaberite poslužitelj najbliže vama. Naravno, morate imati ispravnu vezu sa\n"
-"Internetom da bi ovo radilo. Također, instalirat će vremenski poslužitelj "
-"na\n"
-"vaše računalo kojeg, opcionalno, mogu koristiti druga računala u vašoj\n"
-"lokalnoj mreži."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"X (od X Window System) jest srce GNU/Linux grafičkog sučelja, na kojem "
-"počivaju\n"
-"sva grafička okružja (KDE, GNOME, AfterStep, WindowMaker, itd.) koja dolaze "
-"sa\n"
-"Mandrake Linuxom. Ovdje će DrakX pokušati automatski podesiti Xe.\n"
-"Jako je rijetko da će zakazati, osim ako hardver nije vrlo star (ili nov)\n"
-"Ako uspije, pokrenut će Xe automatski sa najboljom mogućom rezolucijom, "
-"ovisno\n"
-"o veličini monitora. Pojavit će se prozor s upitom da li ga vidite.\n"
-"\n"
-"Ako ste pokrenuli \"Stručnjak\" instalaciju, ući ćete u čarobnjak za "
-"namještanje\n"
-"Xa. Pogledajte odgovarajući odjeljak u priručniku za više informacija o "
-"ovom\n"
-"čarobnjaku.\n"
-"\n"
-"Ako vidite poruku tijekom testa, i odgovorite \"Da\", onda će DrakX krenuti\n"
-"na slijedeći korak. Ako ne možete vidjeti poruku, to jednostavno znači da "
-"je\n"
-"konfiguracija pogrešna i test će se automatski završiti nakon 10 sekundi, "
-"te\n"
-"povratiti ekran."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Konačno ćete biti pitani da li želite vidjeti grafičko sučelje pri\n"
-"dizanju. Primjetite da ovo pitanje će biti pitano iako ne želite "
-"istestirati\n"
-"konfiguraciju. Vjerojatno, želite odgovoriti sa \"Ne\" ukoliko će vaše "
-"računalo\n"
-"raditi kao poslužitelj, ili ako niste bili uspješni u konfiguriranju vašeg\n"
-"zaslona."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-
-#: ../../help.pm_.c:280
-#, fuzzy
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"U ovom trenutku, trebate izabrati gdje ćete instalirati vaš\n"
-"Mandrake Linux operativni sustav na vaš hard disk. Ukoliko je prazan ili "
-"ako\n"
-"postojeći operativni sustav koristi čitav prostor na disku, trebate ga\n"
-"particionirati. Jednostavno, particioniranje hard diska sastoji se od "
-"logičkog\n"
-"dijeljenja kako bi napravili prostor za instalaciju vašeg novog Mandrake "
-"Linux sustava.\n"
-"\n"
-"\n"
-"Zato što su posljedice procesa particioniranja obično ireverzibilne,\n"
-"particioniranje može biti strašno i stresno ukoliko ste korisnik bez "
-"iskustva.\n"
-"Ovaj čarobnjak pojednostavljuje proces. Prije početka, molimo konzultirajte "
-"upute\n"
-"i uzmite vremena koliko vam je potrebno.\n"
-"\n"
-"\n"
-"Trebate najmanje dvije particije. Jedna je za sam operativni sustav, a\n"
-"druga je za virtualnu memoriju (također zvanu Swap).\n"
-"\n"
-"\n"
-"Ukoliko su particije već definirane (iz prijašnje instalacije iliiz\n"
-"drugih particijskih alata), trebate samo izbarati te particije za "
-"instalaciju vašeg\n"
-"Linux sustava.\n"
-"\n"
-"\n"
-"Ukoliko particije nisu već definirane, trebate ih napraviti. \n"
-"Da biste to napravili, koristite čarobnjak gore raspoloživ. U zavisnosti od "
-"vaših hard disk\n"
-"postavki, nekoliko rješenja je raspoloživo:\n"
-"\n"
-"* Korištenje postojeće particije: čarobnjak je detektirao jednu ili više "
-"postojećih Linux particija na vašem hard disku. Ukoliko\n"
-" ih želite zadržati, izaberite ovu opciju.\n"
-"\n"
-"\n"
-"* Obriši cijeli disk: ukoliko želite obrisati sve podatke i sve particije "
-"koje postoje na vašem hard disku i zamjeniti ih sa\n"
-" vašim novim Mandrake Linux sustavom, možete izabrati ovu opciju. Budite "
-"pažljivi sa ovim rješenjem, nećete moći\n"
-" povratiti vaš izbor nakon potvrde.\n"
-"\n"
-"\n"
-"* Koristiti slobodan prostor na Windows particiji: ukoliko je Microsoft "
-"Windows instaliran na vašem hard disku i zauzima\n"
-" cjeli raspoloživ prostor na njemu, trebate napraviti slobodan prostor za "
-"Linux podatke. Da biste to napravili možete obrisati vašu\n"
-" Microsoft Windows particiju i podatke (pogledajte \"Brisanje cijelog diska"
-"\" ili \"Ekspert mod\" rješenja) ili mjenjati veličinu vaše\n"
-" Microsoft Windows particije. Mjenjanje veličine može se obaviti bez "
-"gubitka bilo kakvih podataka. Ovo rješenje je\n"
-" preporučeno ukoliko želite koristiti zajedno Mandrake Linux i Microsoft "
-"Windows-e na istom računalu.\n"
-"\n"
-"\n"
-" Prije izabiranja ovog rješenja, molimo razumite da će veličina vaše "
-"Microsoft\n"
-" Windows partiticije biti manja nego što je sada. To znači da ćete imati "
-"manje slobodnog prostora pod\n"
-" Microsoft Windows-ima za spremanje vaših podataka ili instaliranje novog "
-"software-a.\n"
-"\n"
-"\n"
-"* Ekspertni mod: Ukoliko želite particionirati ručno vaš hard disk, možete "
-"izabrati ovu opciju. Budite pažljivi prije\n"
-" izabiranja ovog rješenja. Vrlo je moćno, ali i vrlo opasno. Možete "
-"izgubiti sve vaše podatke vrlo lako. Zato,\n"
-" nemojte izabrati ovo rješenje ukoliko ne znate što radite."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-
-#: ../../help.pm_.c:378
-#, fuzzy
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Svaka particija koja je novo definirana mora biti\n"
-"formatirana za korištenje (formatiranje znači pravljenje datotečnog "
-"sustava).\n"
-"\n"
-"\n"
-"Trenutno, možete htjeti ponovno formatirati neke već postojeće particije "
-"kako bi obrisali\n"
-"podatke koje one posjeduju. Ukoliko želite to napraviti, molimo također "
-"izaberite particije\n"
-"koje želite formatirati.\n"
-"\n"
-"\n"
-"Molimo primjetite da nije nužno ponovno formatirati sve već postojeće "
-"particije.\n"
-"Morate ponovno formatirati particije koje sadrže operativni sustav (poput \"/"
-"\",\n"
-"\"/usr\" ili \"/var\") ali ne morate ponovno formatirati particije koje "
-"sadrže podatke\n"
-"koje želite zadržati (tipično /home).\n"
-"\n"
-"\n"
-"Molimo budite pažljivi odabirom particija, poslije formatiranja, svi podaci "
-"će biti\n"
-"obrisani i nećete ih moći povratiti.\n"
-"\n"
-"\n"
-"Pritisnite na \"U redu\" kada ste spremni za formatiranje particije.\n"
-"\n"
-"\n"
-"Pritisnite na \"Odustani\" kada želite izabrati druge particije za "
-"instalaciju vašeg novog\n"
-"Mandrake Linux operativnog sustava."
-
-#: ../../help.pm_.c:404
-msgid ""
-"Your new Mandrake Linux operating system is currently being installed.\n"
-"Depending on the number of packages you will be installing and the speed of\n"
-"your computer, this operation could take from a few minutes to a\n"
-"significant amount of time.\n"
-"\n"
-"Please be patient."
-msgstr ""
-"Vaš novi Mandrake Linux operativni sustav se trenutno instalira.\n"
-"U Zavisnosti od broja paketa koliko instalirate i brzine vašeg računala,\n"
-"ova operacija može potrajati od nekoliko minuta do značajne količine\n"
-"vremena.\n"
-"\n"
-"\n"
-"Molimo budite strpljivi."
-
-#: ../../help.pm_.c:412
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Some bugs may have\n"
-"been fixed, and security issues solved. To allow you to benefit from these\n"
-"updates, you are now proposed to download them from the Internet. Choose\n"
-"\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n"
-"to install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" displays a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. Then a package-selection tree\n"
-"appears: review the selection, and press \"Install\" to retrieve and\n"
-"install the selected package(s), or \"Cancel\" to abort."
-msgstr ""
-
-#: ../../help.pm_.c:425
-msgid ""
-"Before continuing, you should read carefully the terms of the license. It\n"
-"covers the whole Mandrake Linux distribution, and if you do not agree with\n"
-"all the terms in it, click on the \"Refuse\" button which will immediately\n"
-"terminate the installation. To continue with the installation, click on the\n"
-"\"Accept\" button."
-msgstr ""
-"Prije nastavka trebate pažljivo pročitati stavke licence. Ona\n"
-"pokriva cijelu Mandrake Linux distribuciju, i ako se ne slažete u svim\n"
-"stavkama sadržanih u njoj, kliknite na \"Odbij\" gumb koji će automatski\n"
-"završiti instalaciju. Za nastavak instalacije, kliknite na\n"
-"\"Prihvati\" gumb."
-
-#: ../../help.pm_.c:432
-msgid ""
-"At this point, it is time to choose the security level desired for the\n"
-"machine. As a rule of thumb, the more exposed the machine is, and the more\n"
-"the data stored in it is crucial, the higher the security level should be.\n"
-"However, a higher security level is generally obtained at the expense of\n"
-"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n"
-"to get more information about the meaning of these levels.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-
-#: ../../help.pm_.c:442
-#, fuzzy
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive;\n"
-"\n"
-" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n"
-"and swap partitions in free space of your hard drive;\n"
-"\n"
-" * \"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
-"\n"
-" * \"Restore partition table\": allows to restore a previously saved\n"
-"partition table from floppy disk;\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
-"\n"
-" * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
-"partitioning;\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes;\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected);\n"
-"\n"
-" * Ctrl-d to delete a partition;\n"
-"\n"
-" * Ctrl-m to set the mount point.\n"
-"\n"
-"To get information about the different filesystem types available, please\n"
-"read the ext2fs chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"U ovoj točki instalacije, trebate izabrati koje\n"
-"partiticije ćete koristiti za instalaciju vašeg novog Mandrake Linux "
-"sustava. Ukoliko su\n"
-"particije već definirane (iz prethodne instalacije GNU/Linux-a ili iz\n"
-"drugih particijskih alata), možete koristiti postojeće particije. U drugim "
-"slučajevima,\n"
-"hard disk particije moraju biti definirane.\n"
-"\n"
-"\n"
-"Za pravljenje particija, morate prvo izabrati hard disk. Možete izabrati \n"
-"disk za particioniranje klikanjem na \"hda\" za prvi IDE disk, \"hdb\" za\n"
-"drugi ili \"sda\" za prvi SCSI disk i tako dalje.\n"
-"\n"
-"\n"
-"Za particioniranje izabranog hard diska, možete izabrati ove opcije:\n"
-"\n"
-" * Obriši sve: ova opcija će obrisati sve raspoložive particije na "
-"odabranom hard disku.\n"
-"\n"
-"\n"
-" * Auto alokacija: ova opcija vam dozvoljava da automatski napravite Ext2 "
-"i swap particije u slobodnom prostoru vašeg\n"
-" hard diska.\n"
-"\n"
-"\n"
-" * Spasi particijsku tablicu: ukoliko je vaša particijska tablica "
-"oštećena, možete probati spasiti ju koristeći ovu opciju. Molimo\n"
-" budite pažljivi i zapamtite da ne mora biti uspješna.\n"
-"\n"
-"\n"
-" * Povrati: možete koristiti ovu opciju za odustajanje od vaših promjena.\n"
-"\n"
-"\n"
-" * Ponovno učitaj: možete koristiti ovu opciju ukoliko želite vratiti "
-"unazad sve promjene i učitati vašu inicijalnu particijsku tablicu\n"
-"\n"
-"\n"
-" * Čarobnjak: ukoliko želite koristiti čarobnjak za particioniranje vašeg "
-"hard diska, možete koristiti ovu opciju. Preporučeno je ukoliko \n"
-" nemate dovoljno znanja oko particioniranja.\n"
-"\n"
-"\n"
-" * Vrati sa diskete: ukoliko ste spremili vašu particijsku tablicu na "
-"disketu tijekom prijašnje instalacije, možete\n"
-" ju vratiti koristeći ovu opciju.\n"
-"\n"
-"\n"
-" * Spremi na disketu: ukoliko želite spremiti vašu particijsku tablicu na "
-"disketu kako biste ju mogli kasnije vratiti, možete koristiti ovu\n"
-" opciju. Jako je preporučljivo koristiti ovu opciju\n"
-"\n"
-"\n"
-" * Završi: kada ste završili s particioniranjem vašeg hard diska, "
-"koristite ovu opciju za spremanje vaših promjena.\n"
-"\n"
-"\n"
-"Za informaciju, možete dohvatiti bilo koju opciju koristeći tastaturu: "
-"navigiranje kroz particije se obavlja koristeći Tab i Up/Down strelice.\n"
-"\n"
-"\n"
-"Kada je particija odabrana, možete koristiti:\n"
-"\n"
-" * Ctrl-c za pravljenje novih particija (kada je prazna particija "
-"izabrana)\n"
-"\n"
-" * Ctrl-d za brisanje particije\n"
-"\n"
-" * Ctrl-m za postavljanje točke montiranja\n"
-" \n"
-"\n"
-" \n"
-"Ukoliko instalirate na PPC računalo, želiti će te napraviti malu HFS "
-"'bootstrap' particiju od najmanje 1MB za korištenje\n"
-"od strane yaboot bootloader-a. Ukoliko se odlučite za pravljenje malo veće "
-"particije, recimo 50MB, možete ju pronaći korisnom za stavljanje\n"
-"dodatnog kernela i ramdisk slike u slučaju nužde."
-
-#: ../../help.pm_.c:513
-#, fuzzy
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Više od jedne Microsoft Windows particije su pronađene\n"
-"na vašem hard disku. Molimo izaberite jednu kojoj želite promjeniti veličinu "
-"kako bi instalirali\n"
-"vaš novi Mandrake Linux operativni sustav.\n"
-"\n"
-"\n"
-"Za informaciju, svaka particija je popisana kako slijedi; \"Linux ime\", "
-"\"Windows\n"
-"ime\" \"Kapacitet\".\n"
-"\n"
-"\"Linux ime\" je kodirano kako slijedi: \"tip hard diska\", \"broj hard diska"
-"\",\n"
-"\"broj particije\" (naprimjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Tip hard diska\" je \"hd\" ukoliko je hard disk - IDE hard disk i \"sd\"\n"
-"ukoliko je on SCSI hard disk.\n"
-"\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo poslije \"hd\" ili \"sd\". Sa IDE hard "
-"diskovima:\n"
-"\n"
-" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\",\n"
-"\n"
-" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\",\n"
-"\n"
-" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\".\n"
-"\n"
-"\n"
-"Sa SCSI hard diskovima, \"a\" znači \"primarni hard disk\", \"b\" znači "
-"\"sekundarni hard disk\", itd...\n"
-"\n"
-"\"Windows ime\" je slovo vašeg hard diska pod Windows-ima (prvi disk\n"
-"ili particija se zove \"C:\")."
-
-#: ../../help.pm_.c:544
-msgid "Please be patient. This operation can take several minutes."
-msgstr "Molimo budite strpljivi. Ova operacija može potrajati nekoliko minuta."
-
-#: ../../help.pm_.c:547
-#, fuzzy
-msgid ""
-"DrakX now needs to know if you want to perform a default (\"Recommended\")\n"
-"installation or if you want to have greater control (\"Expert\"). You can\n"
-"also choose to do a new install or an upgrade of an existing Mandrake Linux\n"
-"system:\n"
-"\n"
-" * \"Install\": completely wipes out the old system. In fact, depending on\n"
-"what currently holds your machine, you will be able to keep some old (Linux\n"
-"or other) partitions unchanged;\n"
-"\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
-"\n"
-" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
-"existing Mandrake Linux system while keeping all system configurations\n"
-"unchanged. Adding new packages to the current installation is also\n"
-"possible.\n"
-"\n"
-"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n"
-"release.\n"
-"\n"
-"Depending on your knowledge of GNU/Linux, select one of the following\n"
-"choices:\n"
-"\n"
-" * Recommended: choose this if you have never installed a GNU/Linux\n"
-"operating system. The installation will be very easy and you will only be\n"
-"asked a few questions;\n"
-"\n"
-" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n"
-"installation class. The expert installation will allow you to perform a\n"
-"highly-customized installation. Answering some of the questions can be\n"
-"difficult if you do not have a good knowledge of GNU/Linux, so do not\n"
-"choose this unless you know what you are doing."
-msgstr ""
-"Molimo izaberite \"Instalacija\" ukoliko nemate prethodne verzijeMandrake "
-"Linux-a\n"
-"instalirano ili ako želite koristiti nekoliko operativnih sustava.\n"
-"\n"
-"\n"
-"Molimo izaberite \"Dogradnja\" ukoliko želite dograditi već postojeću "
-"verzijuMandrake Linux-a.\n"
-"\n"
-"\n"
-"U zavisnosti od znanja u GNU/Linux, možete izabrati jednu od slijedećih "
-"razina za instalaciju ili dogradnju\n"
-"vašeg Mandrake Linux operativnog sustava:\n"
-"\n"
-"* Preporučeno: ukoliko nikad niste instalirali GNU/Linux operativni sustav "
-"izaberite ovo. Instalacija će biti\n"
-" vrlo laka i pitati će vas samo nekoliko pitanja.\n"
-"\n"
-"\n"
-"* Prilagođeno: ukoliko ste već upoznati sa GNU/Linux, možete izabrati "
-"primarnu upotrebu (radna stanica, poslužitelj,\n"
-" razvoj) za vaš sustav. Trebati ćete odgovoriti na više pitanja nego u "
-"\"Preporučenoj\" instalacijskoj\n"
-" klasi, zato trebate znati više o tome kako GNU/Linux radi kako bi izabrali "
-"ovu instalacijsku klasu.\n"
-"\n"
-"\n"
-"* Stručnjak: ukoliko imate dobro znanje o GNU/Linux-u, možete izabrati ovu "
-"instalacijsku klasu. Kao u \"Prilagođenoj\"\n"
-" instalacijskoj klasi, moći ćete izabrati primarnu upotrebu za vaš sustav "
-"(radna stanica, poslužitelj, razvoj). Budite jako\n"
-" pažljivi prije nego što odaberete ovu instalacijsku klasu. Moći ćete "
-"izvršiti visoko prilagođenu instalaciju.\n"
-" Odgovori na neka pitanja mogu biti jako teški ukoliko nemate dobro znanje "
-"GNU/Linux. Dakle, nemojte izabrati\n"
-" ovu instalacijsku klasu ukoliko ne znate što radite."
-
-#: ../../help.pm_.c:583
-msgid ""
-"Normally, DrakX selects the right keyboard for you (depending on the\n"
-"language you have chosen) and you won't even see this step. However, you\n"
-"might not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may still want\n"
-"your keyboard to be a Swiss keyboard. Or if you speak English but are\n"
-"located in Quebec, you may find yourself in the same situation. In both\n"
-"cases, you will have to go back to this installation step and select an\n"
-"appropriate keyboard from the list.\n"
-"\n"
-"Click on the \"More\" button to be presented with the complete list of\n"
-"supported keyboards."
-msgstr ""
-
-#: ../../help.pm_.c:596
-msgid ""
-"Please choose your preferred language for installation and system usage.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation. Selecting other languages\n"
-"will install the language-specific files for system documentation and\n"
-"applications. For example, if you will host users from Spain on your\n"
-"machine, select English as the main language in the tree view and in the\n"
-"Advanced section click on the box corresponding to \"Spanish|Spain\".\n"
-"\n"
-"Note that multiple languages may be installed. Once you have selected any\n"
-"additional locales, click the \"OK\" button to continue."
-msgstr ""
-
-#: ../../help.pm_.c:609
-msgid ""
-"DrakX generally detects the number of buttons your mouse has. If not, it\n"
-"assumes you have a two-button mouse and will set it up for third-button\n"
-"emulation. DrakX will automatically know whether it is a PS/2, serial or\n"
-"USB mouse.\n"
-"\n"
-"If you wish to specify a different type of mouse select the appropriate\n"
-"type from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct. If the mouse is not working well, press the space bar or [Return]\n"
-"to \"Cancel\" and choose again."
-msgstr ""
-
-#: ../../help.pm_.c:623
-#, fuzzy
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molim odaberite ispravni port. Na primjer, COM1 port pod MS Windowsima\n"
-"je imenovan ttyS0 pod GNU/Linuxom."
-
-#: ../../help.pm_.c:627
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"However, please do not make the password too long or complicated because\n"
-"you must be able to remember it without too much effort.\n"
-"\n"
-"The password will not be displayed on screen as you type it in. Hence, you\n"
-"will have to type the password twice to reduce the chance of a typing\n"
-"error. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"In Expert mode, you will be asked if you will be connecting to an\n"
-"authentication server, like NIS or LDAP.\n"
-"\n"
-"If your network uses the LDAP (or NIS) protocol for authentication, select\n"
-"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n"
-"network administrator.\n"
-"\n"
-"If your computer is not connected to any administrated network, you will\n"
-"want to choose \"Local files\" for authentication."
-msgstr ""
-
-#: ../../help.pm_.c:663
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
-"automated. In fact, DrakX analyzes the disk boot sector and acts\n"
-"accordingly, depending on what it finds here:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. Hence, you will be able to load either GNU/Linux or another\n"
-"OS;\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If in doubt, DrakX will display a dialog with various options.\n"
-"\n"
-" * \"Bootloader to use\": you have three choices:\n"
-"\n"
-" * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-" * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"LILO with text menu\": if you prefer LILO with its text menu "
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
-"another boot entry than the default one.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n"
-"Linux system! Also, be sure you know what you do before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer many advanced\n"
-"options, which are reserved to the expert user.\n"
-"\n"
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options which will be available at boot time will be displayed.\n"
-"\n"
-"If there is another operating system installed on your machine, it will\n"
-"automatically be added to the boot menu. Here, you can choose to fine-tune\n"
-"the existing options. Select an entry and click \"Modify\" to modify or\n"
-"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n"
-"installation step."
-msgstr ""
-
-#: ../../help.pm_.c:711
-#, fuzzy
-msgid ""
-"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
-"either GNU/Linux or any other operating system present on your computer.\n"
-"Normally, these other operating systems are correctly detected and\n"
-"installed. If this is not the case, you can add an entry by hand in this\n"
-"screen. Be careful to choose the correct parameters.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone. In which case, you can delete the corresponding entries. But then,\n"
-"you will need a boot disk in order to boot those other operating systems!"
-msgstr ""
-"LILO (the LInux LOader) i Grub su bootloaderi: oni su u mogućnosti podići\n"
-"ili GNU/Linux ili bilo koji drugi postojeći operativni sustav na vašem "
-"računalu.\n"
-"Normalno, ti drugi operativni sustavi su ispravno pronađeni i\n"
-"instalirani. Ako to nije slučaj, možete ga dodati ručno na ovom\n"
-"zaslonu. Budite pažljivi da izaberete ispravne parametre.\n"
-"\n"
-"\n"
-"Također ćete poželiti ne dati pristup tim drugim operativnim sustavima\n"
-"drugima, u tom slučaju možete obrisati odgovarajuće unose. Ali\n"
-"u tom slučaju, trebati ćete boot disketu kako bi ih mogli podići!"
-
-#: ../../help.pm_.c:722
-msgid ""
-"You must indicate where you wish to place the information required to boot\n"
-"to GNU/Linux.\n"
-"\n"
-"Unless you know exactly what you are doing, choose \"First sector of drive\n"
-"(MBR)\"."
-msgstr ""
-"Sada morate odabrati gdje želite staviti zahtijevane informacije za "
-"podizanje\n"
-"GNU/Linuxa.\n"
-"\n"
-"Ako ne znate točno što radite, izaberite \"Prvi sektor diska\n"
-"(MBR)\"."
-
-#: ../../help.pm_.c:729
-msgid ""
-"Here, we select a printing system for your computer. Other OSs may offer\n"
-"you one, but Mandrake Linux offers three.\n"
-"\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
-"printer jams, and you do not have networked printers. It will handle only\n"
-"very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
-"if this is your maiden voyage to GNU/Linux. You can change your choices\n"
-"after installation by running PrinterDrake from the Mandrake Control Center\n"
-"and clicking the expert button.\n"
-"\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
-"graphical front-ends for printing or choosing printer options.\n"
-"\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
-"approximately the same things the others can do, but it will print to\n"
-"printers mounted on a Novell Network, because it supports the IPX protocol,\n"
-"and it can print directly to shell commands. If you have need of Novell or\n"
-"printing to commands without using a separate pipe construct, use lprNG.\n"
-"Otherwise, CUPS is preferable as it is simpler and better at working over\n"
-"networks."
-msgstr ""
-
-#: ../../help.pm_.c:757
-#, fuzzy
-msgid ""
-"DrakX now detects any IDE device present in your computer. It will also\n"
-"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection does not always detect a piece of hardware,\n"
-"DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n"
-"if you know that there is a SCSI card installed in your machine. You will\n"
-"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n"
-"no SCSI hardware. If you are unsure, you can check the list of hardware\n"
-"detected in your machine by selecting \"See hardware info\" and clicking\n"
-"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n"
-"return to the SCSI interface question.\n"
-"\n"
-"If you have to manually specify your adapter, DrakX will ask if you want to\n"
-"specify options for it. You should allow DrakX to probe the hardware for\n"
-"the card-specific options which the hardware needs to initialize. This\n"
-"usually works well.\n"
-"\n"
-"If DrakX is not able to probe for the options which need to be passed, you\n"
-"will need to provide options to the driver manually. Please review the\n"
-"``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
-"Hardware'' section) for hints on retrieving the parameters required from\n"
-"hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
-"Windows on your system)."
-msgstr ""
-"DrakX će pokušati pronaći PCI SCSI adapter(e). Ukoliko DrakX\n"
-"pronađe SCSI adapter i zna koji upravljački program da koristi, on će "
-"automatski biti\n"
-"instaliran.\n"
-"\n"
-"\n"
-"Ukoliko nemate SCSI adapter, ISA SCSI adapter ili PCI SCSI adapter koji\n"
-"DrakX ne može prepoznati, biti ćete pitani da li imate SCSI adapter u vašem\n"
-"sustavu. Ukoliko nemate adapter, možete kliknuti na \"Ne\". Ukoliko kliknete "
-"na\n"
-"\"Da\", dobiti ćete popis upravljačkih programa odakle možete izabrati vaš\n"
-"specifičan adapter.\n"
-"\n"
-"\n"
-"Ako trebate ručno specifirati vaš adapter, DrakX će pitati da li želite \n"
-"specifirati opcije za njega. Trebali biste dozvoliti DrakX-u da isproba "
-"opcije za\n"
-"hardware. Ovo obično radi dobro.\n"
-"\n"
-"\n"
-"Ako ne, trebati ćete navesti opcije za upravljački program. Molimo "
-"pregledajte User\n"
-"Guide (poglavlje 3, sekciju \"Collective informations on your hardware\") za "
-"preporuke\n"
-"o pribavljanju ovih informacija iz dokumentacije hardware-a, sa \n"
-"proizvođačevog Web site-a (ukoliko imate Internet pristup) ili iz Microsoft "
-"Windows-a\n"
-"(ukoliko ga imate na vašem sustavu)."
-
-#: ../../help.pm_.c:784
-#, fuzzy
-msgid ""
-"You can add additional entries for yaboot, either for other operating\n"
-"systems, alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension;\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation;\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is used quite often\n"
-"to assist in initializing video hardware, or to enable keyboard mouse\n"
-"button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
-"Apple mouse. The following are some examples:\n"
-"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules, before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation;\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n"
-"need to allocate a large ramdisk, this option can be used;\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially brought up in\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"Here, you can override this option;\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support;\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by just pressing ENTER at the yaboot prompt. This entry will\n"
-"also be highlighted with a ``*'', if you press [Tab] to see the boot\n"
-"selections."
-msgstr ""
-"Možete dodati dodatne unose za yaboot, ili za drugi operativni sustav,\n"
-"alternativne kernele, ili za spasonosnu boot sliku.\n"
-"\n"
-"\n"
-"Za druge OS-ove - unos se sastoji samo od labele i root particije.\n"
-"\n"
-"\n"
-"Za Linux, postoji nekoliko mogućih opcija: \n"
-"\n"
-"\n"
-" - Labela: Ovo je jednostavno ime koje ćete napisati u yaboot promptu za "
-"odabir ove \n"
-"boot opcije.\n"
-"\n"
-"\n"
-" - Slika: Ovo će biti ime kernela pri podizanju. Tipično vmlinux ili\n"
-"varijacija vmlinux-a sa ekstenzijom.\n"
-"\n"
-"\n"
-" - Root: root uređaj ili '/' za vašu Linux instalaciju.\n"
-"\n"
-"\n"
-" \n"
-" - Dodatak: Na Apple hardware-u, kernel dodatak opcija se koristi vrlo "
-"često za\n"
-"pomoć pri inicijaliziranju video hardware-a, ili za omogućavanje emulacije "
-"tastaturnih mišjih gumba\n"
-"zbog čestog nedostatka 2-og ili 3-eg mišjeg gumba na Apple miševima. "
-"Slijedeće \n"
-"su neki primjeri:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-" - Initrd: Ova opcija se može koristiti ili za učitavanje inicijalnih "
-"modula, prijenego što je boot\n"
-"uređaj raspoloživ, ili za učitavanje ramdisk slike za spasonosne boot "
-"situacije.\n"
-"\n"
-"\n"
-" - Initrd-veličina: Podrazumijevana veličina ramdisk-a je općenito 4096 "
-"byte-ova. Ukoliko trebate\n"
-"alocirati veći ramdisk, ova opcija može biti korištena.\n"
-"\n"
-"\n"
-" - Čitaj-Piši: Normalno je 'root' particija inicijalno podignuta u čitaj-"
-"samo, za mogućnost\n"
-"provjere datotečnog sustava prije nego sustav postane 'živ'. Možete "
-"nadjačati ovu opciju ovdje.\n"
-"\n"
-"\n"
-" - NoVideo: Ako se Apple hardware pokaže kao iznimno problematičan, možete\n"
-"izabrati ovu opciju za podizanje u 'novideo' modu, sa native framebuffer "
-"podrškom.\n"
-"\n"
-"\n"
-" - Podrazumijevano: Izabire ovaj unos kao podrazumijevani Linux izbor, "
-"moguće izbirati sa samo\n"
-"pritiskom ENTER-a na yaboot pitanju. Ovaj unos će također biti označen sa "
-"'*', ukoliko\n"
-"koristite TAB za pregledavanje boot izbora."
-
-#: ../../help.pm_.c:830
-#, fuzzy
-msgid ""
-"Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
-"either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
-"these other operating systems are correctly detected and installed. If this\n"
-"is not the case, you can add an entry by hand in this screen. Be careful to\n"
-"choose the correct parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt;\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information;\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt;\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot je bootloader za NewWorld MacIntosh hardware. U mogućnosti je\n"
-"podići ili GNU/Linux, MacOS, ili MacOSX, ukoliko postoje na vašem računalu.\n"
-"Normalno, ti drugi operativni sustavi su ispravno pronađeni i\n"
-"instalirani. Ukoliko to nije slučaj, možete dodati unos ručno na ovom\n"
-"zaslonu. Budite pažljivi da izaberete ispravne parametre.\n"
-"\n"
-"\n"
-"Yaboot glavne opcije su:\n"
-"\n"
-"\n"
-" - Init Poruka: Jednostavna tekst poruka koja se prikaže prije pitanja o\n"
-"podizanju.\n"
-"\n"
-"\n"
-" - Boot Uređaj: Označava gdje želite staviti informaciju potrebnu za \n"
-"podizanje GNU/Linux-a. Općenito, morati ćete imati postavljenu bootstrap "
-"particiju prije, \n"
-"da može držati ovu informaciju.\n"
-"\n"
-"\n"
-" - Otvorena Firmware Pauza: Za razliku od LILO-a, postoje dvije raspoložive "
-"pauze sa\n"
-"yaboot-om. Prva pauza se mjeru sekundama i na tom mjestu možete \n"
-"birati izmežu CD-a, OF boot-a, MacOS-a ili Linux-a.\n"
-"\n"
-"\n"
-" - Kernel Boot Čekanje: Ovo čekanje je slično LILO boot čekanju. Poslije \n"
-"izabiranja Linux-a, imati ćete pauzu od 0.1 sekunde prije nego "
-"podrazumijevani\n"
-"kernel opis bude odabran.\n"
-"\n"
-"\n"
-" - Omogući CD Boot?: Postavljanje ove opcije će vam dozvoliti da možete "
-"izabrati 'C' za CD na\n"
-"prvom pitanju pri podizanju.\n"
-"\n"
-"\n"
-" - Omogući OF Boot?: Postavljanje ove opcije će vam dozvoliti da možete "
-"izabrati 'N' za Open\n"
-"Firmware prvi prvom pitanju pri podizanju.\n"
-"\n"
-"\n"
-" - Podrazumijevani OS: Možete izabrati koji OS ćete podići podrazumijevano "
-"kada Open Firmware \n"
-"pauza istekne."
-
-#: ../../help.pm_.c:862
-msgid ""
-"Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary;\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and click on\n"
-"the button to change that if necessary;\n"
-"\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
-"\n"
-" * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
-"configuration wizard;\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. No modification possible at installation time;\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. No modification possible at installation time;\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it is\n"
-"displayed here. You can click on the button to change the parameters\n"
-"associated with it."
-msgstr ""
-
-#: ../../help.pm_.c:891
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk kojeg želite obrisati kako bi instalirali vašu\n"
-"novu Mandrake Linux particiju. Budite pažljivi, svi postojeći podaci\n"
-"biti će izgubljen i neće se moći povratiti!"
-
-#: ../../help.pm_.c:896
-#, fuzzy
-msgid ""
-"Click on \"OK\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"Cancel\" to cancel this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Izaberite \"U redu\" ukoliko želite obrisati sve podatke i\n"
-"postojeće particije na navedenom hard disku. Budite pažljivi, nakon "
-"klikanja\n"
-"na \"U redu\", nećete moći povratiti bilo kakve postojeće podatke ili "
-"particije\n"
-"na ovom hard disku, uključujući Windows podatke.\n"
-"\n"
-"\n"
-"Pritisnite na \"Odustani\" za prekidanje ove operacije bez gubljenja bilo\n"
-"kakvih postojećih podataka i particija na ovom hard disku."
-
-#: ../../install2.pm_.c:113
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: ../../install2.pm_.c:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate također formatirati %s"
-
-#: ../../install_any.pm_.c:411
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new could be found. In that case, you must make sure to "
-"upgrade\n"
-"as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Izabrali ste slijedeće poslužitelje: %s\n"
-"\n"
-"\n"
-"Ti poslužitelji biti će postavljeno aktivirani. Oni nemaju poznatih "
-"sigurnosnih\n"
-"propusta, ali neki novi mogu biti pronađeni. U tom slučaju, morate ga "
-"nadograditi\n"
-"što prije moguće.\n"
-"\n"
-"\n"
-"Da li zaista želite instalirati te poslužitelje?\n"
-
-#: ../../install_any.pm_.c:447
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
-
-#: ../../install_any.pm_.c:793
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Umetnite FAT formatiranu disketu u pogon %s"
-
-#: ../../install_any.pm_.c:797
-msgid "This floppy is not FAT formatted"
-msgstr "Ova disketa nije FAT formatirana"
-
-#: ../../install_any.pm_.c:809
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Za korištenje spremljenog odabira paketa, podignite instalaciju sa ``linux "
-"defcfg=floppy''"
-
-#: ../../install_any.pm_.c:831 ../../partition_table.pm_.c:763
-#, c-format
-msgid "Error reading file %s"
-msgstr "Greška prilikom čitanja datoteke %s"
-
-#: ../../install_interactive.pm_.c:23
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki hardware na vašem računalu treba ``vlasničke'' upravljačke programe\n"
-"kako bi proradio. Možete naći više informaciju o tome na: %s"
-
-#: ../../install_interactive.pm_.c:58
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Prvo napravite particiju (ili kliknite na postojeću) te\n"
-"odaberite akciju ``Mjesto monitranja'' te odaberite `/'"
-
-#: ../../install_interactive.pm_.c:63
-msgid "You must have a swap partition"
-msgstr "Morate imati swap particiju"
-
-#: ../../install_interactive.pm_.c:64
-msgid ""
-"You don't have a swap partition\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Swap particija ne postoji\n"
-"\n"
-"Da ipak nastavim?"
-
-#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:163
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-
-#: ../../install_interactive.pm_.c:90
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: ../../install_interactive.pm_.c:92
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: ../../install_interactive.pm_.c:100
-msgid "Use existing partition"
-msgstr "Koristi postojeće particije"
-
-#: ../../install_interactive.pm_.c:102
-msgid "There is no existing partition to use"
-msgstr "Nema postojećih particija koje bih mogao upotrijebiti"
-
-#: ../../install_interactive.pm_.c:109
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: ../../install_interactive.pm_.c:112
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju želite koristiti za Linux4Win?"
-
-#: ../../install_interactive.pm_.c:114
-msgid "Choose the sizes"
-msgstr "Odaberite veličinu"
-
-#: ../../install_interactive.pm_.c:115
-msgid "Root partition size in MB: "
-msgstr "Veličina korijenske particije u MB: "
-
-#: ../../install_interactive.pm_.c:116
-msgid "Swap partition size in MB: "
-msgstr "Veličina swap particiju u MB: "
-
-#: ../../install_interactive.pm_.c:125
-msgid "Use the free space on the Windows partition"
-msgstr "Iskoristi slobodan prostor na Windows particiji"
-
-#: ../../install_interactive.pm_.c:128
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji želite promijeniti veličinu?"
-
-#: ../../install_interactive.pm_.c:130
-msgid "Computing Windows filesystem bounds"
-msgstr "Izračunavam granice Windows datotečnog sustava"
-
-#: ../../install_interactive.pm_.c:133
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
-msgstr ""
-"Program koji mjenja veličinu FAT-a ne može rukovati vašom particijom, \n"
-"slijedeća greška se dogodila: %s"
-
-#: ../../install_interactive.pm_.c:136
-msgid "Your Windows partition is too fragmented, please run ``defrag'' first"
-msgstr ""
-"Vaša Windows particija je prefragmentirana, molim pokrenite ``defrag'' prvo."
-
-#: ../../install_interactive.pm_.c:137
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX sada mora promijeniti veličinu vaše Windows particije\n"
-"Budite vrlo oprezni budući da je ova operacija\n"
-"izuzetno opasna. Ukoliko još niste mijenjali veličinu particije molim\n"
-"izađite prvo iz instalacije, pokrenite scandisk pod Windowsima (opcionalno "
-"pokrenite defrag), tada ponovno pokrenite instalaciju.\n"
-"Također preporučljivo je da sačuvate vaše podatke (napravite backup).\n"
-"Kada ste sigurni da želite nastaviti, pritisnite U redu."
-
-#: ../../install_interactive.pm_.c:147
-msgid "Which size do you want to keep for windows on"
-msgstr "Koliku veličinu želite zadržati za windowse"
-
-#: ../../install_interactive.pm_.c:148
-#, c-format
-msgid "partition %s"
-msgstr "particija %s"
-
-#: ../../install_interactive.pm_.c:155
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Mijenjanje FAT veličine nije uspjelo: %s"
-
-#: ../../install_interactive.pm_.c:170
-msgid ""
-"There is no FAT partitions to resize or to use as loopback (or not enough "
-"space left)"
-msgstr ""
-"Nema FAT particije za mjenjanje veličine ili za korištenje loopback-a (ili "
-"nema dovoljno prostora)"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Erase entire disk"
-msgstr "Obriši cijeli disk"
-
-#: ../../install_interactive.pm_.c:176
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windowse(TM)"
-
-#: ../../install_interactive.pm_.c:179
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Imate više od jednog hard diska, na koji želite instalirati Linux?"
-
-#: ../../install_interactive.pm_.c:182
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "SVE postojeće particije i podaci biti će izgubljeni na disku %s"
-
-#: ../../install_interactive.pm_.c:190
-msgid "Custom disk partitioning"
-msgstr "Proizvoljno particioniranje diska"
-
-#: ../../install_interactive.pm_.c:194
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: ../../install_interactive.pm_.c:197
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Sada možete razdijeliti %s.\n"
-"Kada ste gotovi ne zaboravite spremiti postavu sa `w'"
-
-#: ../../install_interactive.pm_.c:226
-msgid "You don't have enough free space on your Windows partition"
-msgstr "Nemate dovoljno slobodnog prostora na vašoj Windows particiji"
-
-#: ../../install_interactive.pm_.c:242
-msgid "I can't find any room for installing"
-msgstr "Ne mogu pronaći bilo kakvo mjesto za instaliranje"
-
-#: ../../install_interactive.pm_.c:246
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX čarobnjak za particioniranje je pronašao slijedeća rješenja:"
-
-#: ../../install_interactive.pm_.c:251
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje neuspjelo: %s"
-
-#: ../../install_interactive.pm_.c:261
-msgid "Bringing up the network"
-msgstr "Podižem mrežu"
-
-#: ../../install_interactive.pm_.c:266
-msgid "Bringing down the network"
-msgstr "Onemogućujem mrežu"
-
-#: ../../install_steps.pm_.c:76
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Dogodila se greška, ali neznam kako s njom lijepo rukovati.\n"
-"Nastavite dalje na vlastiti rizik."
-
-#: ../../install_steps.pm_.c:205
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dupliciraj mjesto monitranja %s"
-
-#: ../../install_steps.pm_.c:388
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
-msgstr ""
-"Neki važni paketi nisu se instalirali pravilno.\n"
-"Ili je vaš cdrom pogon ili cd medij u defektu.\n"
-"Provjerite cdrom na instaliranom računalu koristeći \"rpm -qpl Mandrake/RPMS/"
-"*.rpm\"\n"
-
-#: ../../install_steps.pm_.c:458
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobrodošli u %s"
-
-#: ../../install_steps.pm_.c:513 ../../install_steps.pm_.c:755
-msgid "No floppy drive available"
-msgstr "Disketni pogon nije dostupan"
-
-#: ../../install_steps_auto_install.pm_.c:76
-#: ../../install_steps_stdio.pm_.c:22
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Pokrećem korak `%s'\n"
-
-#: ../../install_steps_gtk.pm_.c:148
-msgid ""
-"Your system is low on resource. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Vaš sustav je slab na resursima. Možete imati nekih problem prilikom\n"
-"instalacije Mandrake Linux-a. Ukoliko se to desi, možete probati tekstualnu\n"
-"instalaciju. Za to, pritisnite `F1' kada podižete CDROM, i unesite `text'."
-
-#: ../../install_steps_gtk.pm_.c:159 ../../install_steps_interactive.pm_.c:224
-msgid "Install Class"
-msgstr "Instalacijski razred"
-
-#: ../../install_steps_gtk.pm_.c:162
-msgid "Please choose one of the following classes of installation:"
-msgstr "Molim izaberite jedan od slijedećih razreda instalacije:"
-
-#: ../../install_steps_gtk.pm_.c:228
-#, c-format
-msgid ""
-"The total size for the groups you have selected is approximately %d MB.\n"
-msgstr "Ukupna veličina izabranih grupa je otprilike %d MB.\n"
-
-#: ../../install_steps_gtk.pm_.c:230
-#, c-format
-msgid ""
-"If you wish to install less than this size,\n"
-"select the percentage of packages that you want to install.\n"
-"\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of 100%% will install all selected packages."
-msgstr ""
-"Ukoliko želite instalirati manje od ove veličine,\n"
-"izaberite postotak paketa koliko želite instalirati.\n"
-"\n"
-"Mali postotak će instalirati samo najvažnije pakete;\n"
-"dok postotak od 100%% će instalirati sve odabrane pakete."
-
-#: ../../install_steps_gtk.pm_.c:235
-#, c-format
-msgid ""
-"You have space on your disk for only %d%% of these packages.\n"
-"\n"
-"If you wish to install less than this,\n"
-"select the percentage of packages that you want to install.\n"
-"A low percentage will install only the most important packages;\n"
-"a percentage of %d%% will install as many packages as possible."
-msgstr ""
-"Imate mjesta na vašem disku za samo %d%% paketa.\n"
-"\n"
-"Ukoliko želite instalirati manje od ovoga,\n"
-"izaberite postotak paketa koliko želite instalirati.\n"
-"Mali postotak će instalirati samo najvažnije pakete;\n"
-"dok postotak od %d%% će instalirati koliko god je paketa moguće."
-
-#: ../../install_steps_gtk.pm_.c:241
-msgid "You will be able to choose them more specifically in the next step."
-msgstr "Detaljniji izbor nalazi se u slijedećem koraku."
-
-#: ../../install_steps_gtk.pm_.c:243
-msgid "Percentage of packages to install"
-msgstr "Odaberite postotak paketa koje želite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:291 ../../install_steps_interactive.pm_.c:705
-msgid "Package Group Selection"
-msgstr "Odabir grupe paketa"
-
-#: ../../install_steps_gtk.pm_.c:323 ../../install_steps_interactive.pm_.c:720
-msgid "Individual package selection"
-msgstr "Individualan odabir paketa"
-
-#: ../../install_steps_gtk.pm_.c:346 ../../install_steps_interactive.pm_.c:645
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veličina: %d / %d MB"
-
-#: ../../install_steps_gtk.pm_.c:391
-msgid "Bad package"
-msgstr "Loš paket"
-
-#: ../../install_steps_gtk.pm_.c:392
-#, c-format
-msgid "Name: %s\n"
-msgstr "Ime: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:393
-#, c-format
-msgid "Version: %s\n"
-msgstr "Inačica: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:394
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "Veličina: %d KB\n"
-
-#: ../../install_steps_gtk.pm_.c:395
-#, c-format
-msgid "Importance: %s\n"
-msgstr "Značaj: %s\n"
-
-#: ../../install_steps_gtk.pm_.c:417
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr ""
-"Ne možete označiti ovaj paket budući da nema dovoljno mjesta gdje ga se može "
-"instalirati"
-
-#: ../../install_steps_gtk.pm_.c:422
-msgid "The following packages are going to be installed"
-msgstr "Slijedeći paketi će biti instalirani"
-
-#: ../../install_steps_gtk.pm_.c:423
-msgid "The following packages are going to be removed"
-msgstr "Slijedeći paketi će biti uklonjeni"
-
-#: ../../install_steps_gtk.pm_.c:435
-msgid "You can't select/unselect this package"
-msgstr "Ne možete označiti/odznačiti ovaj paket"
-
-#: ../../install_steps_gtk.pm_.c:447
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Budući da je ovo obvezni paket ne možete ga odznačiti"
-
-#: ../../install_steps_gtk.pm_.c:449
-msgid "You can't unselect this package. It is already installed"
-msgstr "Ne možete odznačiti ovaj paket budući da je već instaliran"
-
-#: ../../install_steps_gtk.pm_.c:453
-msgid ""
-"This package must be upgraded\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket treba nadograditi\n"
-"Da li ste sigurni da ga želite odznačiti?"
-
-#: ../../install_steps_gtk.pm_.c:457
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Ne možete odznačiti ovaj paket budući da ga treba nadograditi"
-
-#: ../../install_steps_gtk.pm_.c:462
-msgid "Show automatically selected packages"
-msgstr "Prikaži automatski odabrane pakete"
-
-#: ../../install_steps_gtk.pm_.c:463 ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Install"
-msgstr "Instaliraj"
-
-#: ../../install_steps_gtk.pm_.c:466
-msgid "Load/Save on floppy"
-msgstr "Učitaj/Spremi na disketu"
-
-#: ../../install_steps_gtk.pm_.c:467
-msgid "Updating package selection"
-msgstr "Dograđujem izbor paketa"
-
-#: ../../install_steps_gtk.pm_.c:472
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
-
-#: ../../install_steps_gtk.pm_.c:487 ../../install_steps_interactive.pm_.c:555
-msgid "Choose the packages you want to install"
-msgstr "Odaberite pakete koje želite instalirati"
-
-#: ../../install_steps_gtk.pm_.c:503 ../../install_steps_interactive.pm_.c:787
-msgid "Installing"
-msgstr "Instaliram"
-
-#: ../../install_steps_gtk.pm_.c:509
-msgid "Estimating"
-msgstr "Procjenjujem"
-
-#: ../../install_steps_gtk.pm_.c:516
-msgid "Time remaining "
-msgstr "Preostalo vrijeme"
-
-#: ../../install_steps_gtk.pm_.c:528
-msgid "Please wait, preparing installation"
-msgstr "Molimo pričekajte, Pripremam instalaciju"
-
-#: ../../install_steps_gtk.pm_.c:611
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: ../../install_steps_gtk.pm_.c:616
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-#: ../../standalone/drakautoinst_.c:203
-msgid "Accept"
-msgstr "Prihvati"
-
-#: ../../install_steps_gtk.pm_.c:657 ../../install_steps_interactive.pm_.c:185
-#: ../../install_steps_interactive.pm_.c:811
-msgid "Refuse"
-msgstr "Odbij"
-
-#: ../../install_steps_gtk.pm_.c:658 ../../install_steps_interactive.pm_.c:812
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promjenite vaš Cd-Rom!\n"
-"\n"
-"Ubacite Cd-Rom označen \"%s\" u vaš pogon i pritisnite U redu kada "
-"završite.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli instalaciju sa ovog "
-"Cd-Rom-a."
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_gtk.pm_.c:676
-#: ../../install_steps_interactive.pm_.c:824
-#: ../../install_steps_interactive.pm_.c:828
-msgid "Go on anyway?"
-msgstr "Da ipak nastavim?"
-
-#: ../../install_steps_gtk.pm_.c:672 ../../install_steps_interactive.pm_.c:824
-msgid "There was an error ordering packages:"
-msgstr "Javila se greška prilikom sortiranja paketa:"
-
-#: ../../install_steps_gtk.pm_.c:676 ../../install_steps_interactive.pm_.c:828
-msgid "There was an error installing packages:"
-msgstr "Pojavila se greška kod instalacije paketa:"
-
-#: ../../install_steps_interactive.pm_.c:10
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Upozorenje\n"
-"\n"
-"Molimo pročitajte pažljivo činjenice niže. Ukoliko se ne slažete sa bilo\n"
-"kojim dijelom, nemate dozvolu instalirati slijedeći CD medij. Pritisnite "
-"'Odbij' \n"
-"za nastavak instalacije bez korištenja ovog medija.\n"
-"\n"
-"\n"
-"Neke komponente sadržane u slijedećem CD mediju nisu pokrivene\n"
-"GPL licencom ili sličnim ugovorom. Svaka takva komponenta je tada\n"
-"pokrivena stavkama i uvjetima svojim vlastitim specifičnim licencama. \n"
-"Molimo pročitajte pažljivo i složite se specifičnim licencama prije \n"
-"vašeg korištenja ili redistribuiranja navedenih komponenti. \n"
-"Takve licence općenito zabranjuju prijenos, dupliciranje \n"
-"(osim za spasonosne kopije), redistribuciju, reverzno inženjerstvo, \n"
-"disasembliranje, dekompilaciju ili promjenu komponente. \n"
-"Svako kršenje ugovora će odmah prekinuti vaša prava kod\n"
-"specifične licence. Ako vam stavke specifične licence ne odobre takva\n"
-"prava, obično ne možete instalirati programe na više od jednog\n"
-"sustava, ili prilagoditi ga za korištenje na mreži. Ako ste u nedoumici,\n"
-"kontaktirajte direktno distributera ili urednika komponente. \n"
-"Prijenos trećim osobama ili kopiranje takvih komponenti uključujući \n"
-"dokumentaciju je obično zabranjeno.\n"
-"\n"
-"\n"
-"Sva prava na komponente slijedećeg CD medija pripadaju njihovim \n"
-"uvaženim autorima i zaštićeni su intelektualnim vlasništvom i \n"
-"autorskim zakonima primjenjivim na software-ske programe.\n"
-
-#: ../../install_steps_interactive.pm_.c:67
-msgid "An error occurred"
-msgstr "Pojavila se greška"
-
-#: ../../install_steps_interactive.pm_.c:85
-msgid "Do you really want to leave the installation?"
-msgstr "Da li zaista želite napustiti instalaciju?"
-
-#: ../../install_steps_interactive.pm_.c:108
-msgid "License agreement"
-msgstr "Licencni dogovor"
-
-#: ../../install_steps_interactive.pm_.c:109
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read carefully this document. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurance of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-msgstr ""
-"Uvod\n"
-"\n"
-"Operativni sustav i njegove različite komponente raspoložive u Mandrake "
-"Linux distribuciji \n"
-"će se zvati \"Software-ski Produkti\" daljnje u tekstu. Software-ski "
-"Produkti uključuju, ali nisu \n"
-"ograničeni na, skup programa, metoda, zakona i dokumentacija vezanih uz "
-"operativni\n"
-"sustav i različite komponente Mandrake Linux distribucije.\n"
-"\n"
-"\n"
-"1. Licencni Dogovor\n"
-"\n"
-"Molimo pažljivo pročitajte ovaj dokument. Ovaj dokument je licenci dogovor "
-"između vas i \n"
-"MandrakeSoft S.A. koji se primjenjuje na Software-ske produkte.\n"
-"Instaliranjem, dupliciranjem ili korištenjem Software-skih Produkata u bilo "
-"kojem obliku,eksplicitno \n"
-"prihvaćate i potpuno se slažete da ćete prihvatiti stavke i uvjete ove "
-"Licence. \n"
-"Ukoliko se ne slažete sa bilo kojim dijelom licence, nije vam dozvoljeno "
-"instalirati, duplicirati ili koristiti \n"
-"Software-ski produkt. \n"
-"Svaki pokušaj instalacije, dupliciranja ili korištenja Software-skog "
-"Produkta u obliku kojem ne priliči \n"
-"sa stavkama i uvjetima ove licence je prazno i uništiti će vaša prava pod "
-"ovom\n"
-"Licencom. Uslijed uništenja licence, morate odmah unišititi sve kopije \n"
-"Software-skog Produkta.\n"
-"\n"
-"\n"
-"2. Ograničeno Jamstvo\n"
-"\n"
-"Software-ski Produkt i pripadajuća dokumentacija je pružena \"kako je\", bez "
-"jamstva, do \n"
-"mjere dozvoljene zakonom.\n"
-"MandrakeSoft S.A. neće, u bilo kojim slučajevima i do te mjere dozvoljene "
-"zakonom, biti odgovaran za bilo kakvu specijalnu,\n"
-"nesretnu, direktnu ili indirektnu štetu bilo kakvu (uključujući granice "
-"štete od gubitka\n"
-"posla, prestanka posla, financijskih gubitaka, legalnih plaćanja i kazni "
-"posljedica sudskih \n"
-"presuda, ili bilo kakvih drugih posljedica gubitka) što je posljedica "
-"korištenja ili nemogućnosti korištenja Software-skog \n"
-"Produkta, iako je MandrakeSoft S.A. bio upozoren od mogućnosti takve \n"
-"štete.\n"
-"\n"
-"OGRANIČENA ODGOVORNOST POVEZANA SA POSJEDOVANJEM ILI KORIŠTENJEM ZABRANJENOG "
-"SOFTWARE-A U NEKIM ZEMLJAMA\n"
-"\n"
-"Do granice dozvoljene zakonom, MandrakeSoft S.A. ili njegovi distributori "
-"neće, u bilo kakvim slučajevima, biti \n"
-"odgovaran za bilo kakvu specijalnu, nesretnu, direktnu ili indirektnu štetu "
-"bilo kako (uključujući \n"
-"ograničene štete zbog gubitka posla, prekida posla, financijskog gubitka, "
-"legalnih plaćanja \n"
-"i kazni posljedica sudskih presuda, ili bilo kakvih drugih "
-"posljedicagubitka) što je posljedica \n"
-"posjedovanja ili korištenja software-skih komponenti ili kao posljedica "
-"skidanja (download-a) software-skih komponenti \n"
-"sa jednog od Mandrake Linux site-ova koja su zabranjena ili ograničena u "
-"nekim zemljama po lokalnim zakonima.\n"
-"Ova ograničena odgovornost se primjenjuje na, ali nije ograničena, jake "
-"kriptografske komponente \n"
-"uključene u Software-ski Produkt.\n"
-"\n"
-"\n"
-"3. GPL Licenca i slične licence\n"
-"\n"
-"Software-ski Prodkt se sastoji od komponenti napravljenih od raznih ljudi "
-"ili entiteta. Veliki \n"
-"broj tih komponenti je pokriveno pod stavkama i uvjetima GNU Opće Javne \n"
-"Licence, u daljnjem tekstu zvana \"GPL\", ili sličnih licenci. Veliki broj "
-"tih licenci dozvoljava vam korištenje, \n"
-"dupliciranje, prilagođavanje ili redistribuciju komponenti koju ona pokriva. "
-"Molimo pročitajte pažljivo stavke \n"
-"i uvjete licencnog dogovora svake komponente prije korištenja bilo koje "
-"komponente. Bilo koje pitanje \n"
-"o licenci komponente trebao bi biti adresiran autoru komponente a ne "
-"MandrakeSoft-u.\n"
-"Programe razvijeni od strane MandrakeSoft S.A. su pokriveni GPL licencom. "
-"Dokumentacija napisana \n"
-"od strane MandrakeSoft S.A. je pokrivena specifičnom licencom. Molimo "
-"pogledajte dokumentaciju za \n"
-"više detalja.\n"
-"\n"
-"\n"
-"4. Prava na intelektualno vlasništvo\n"
-"\n"
-"Sva prava komponenti Software-skog Produkta pripada njihovim uvaženim "
-"autorima i \n"
-"zaštićeni su intelektualnim vlasništvom i autorskim zakonima primjenjivim na "
-"software-ske programe.\n"
-"MandrakeSoft S.A. zadržava svoje pravo za izmjenu ili prilagođavanje "
-"Software-skog Produkta, kao cijelinu ili u\n"
-"dijelovima, u svim slučajevima za sve namjene.\n"
-"\"Mandrake\", \"Mandrake Linux\" i pripadajući logoi su zaštićeni prodajni "
-"znaci MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Državni zakoni \n"
-"\n"
-"Ukoliko neki dio ovog dogovora govori ništa, ilegalan ili neprikladan "
-"sudstvu, taj \n"
-"dio može se isključiti iz ovog ugovora. Ali ostajete obveznu drugim "
-"primjenjivim sekcijama\n"
-"ugovora.\n"
-"Za stavke i uvjete ove Licence je nadležan zakon Francuske.\n"
-"Sve sporove oko stavaka licence će preferirano biti uređeno sudom. Kao "
-"zadnji \n"
-"izlaz, spor će biti predan odgovarajućem Sudu u Parizu - Francuska.\n"
-"Za bilo kakva pitanja o ovom dokumentu, molimo kontaktirajte MandrakeSoft S."
-"A. \n"
-
-#: ../../install_steps_interactive.pm_.c:205
-#: ../../install_steps_interactive.pm_.c:1045
-#: ../../standalone/keyboarddrake_.c:28
-msgid "Keyboard"
-msgstr "Tipkovnica"
-
-#: ../../install_steps_interactive.pm_.c:206
-msgid "Please choose your keyboard layout."
-msgstr "Molim, izaberite raspored tipkovnice."
-
-#: ../../install_steps_interactive.pm_.c:207
-msgid "Here is the full list of keyboards available"
-msgstr "Ovdje je cijeli popis raspoloživih tipkovnica"
-
-#: ../../install_steps_interactive.pm_.c:224
-msgid "Which installation class do you want?"
-msgstr "Koji instalacijski razred želite?"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Install/Update"
-msgstr "Instaliraj/Nadogradi"
-
-#: ../../install_steps_interactive.pm_.c:226
-msgid "Is this an install or an update?"
-msgstr "Da li je ovo instalacija ili nadogradnja?"
-
-#: ../../install_steps_interactive.pm_.c:235
-msgid "Recommended"
-msgstr "Preporučeno"
-
-#: ../../install_steps_interactive.pm_.c:238
-#: ../../install_steps_interactive.pm_.c:241
-msgid "Expert"
-msgstr "Ekspert"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade"
-msgstr "Dogradnja"
-
-#: ../../install_steps_interactive.pm_.c:246
-#: ../../install_steps_interactive.pm_.c:250
-msgid "Upgrade packages only"
-msgstr "Samo dogradi pakete"
-
-#: ../../install_steps_interactive.pm_.c:266
-msgid "Please choose the type of your mouse."
-msgstr "Molim izaberite vašu vrstu miša."
-
-#: ../../install_steps_interactive.pm_.c:272 ../../standalone/mousedrake_.c:65
-msgid "Mouse Port"
-msgstr "Port miša"
-
-#: ../../install_steps_interactive.pm_.c:273 ../../standalone/mousedrake_.c:66
-msgid "Please choose on which serial port your mouse is connected to."
-msgstr "Izaberite na kojem serijskom portu je miš priključen."
-
-#: ../../install_steps_interactive.pm_.c:281
-msgid "Buttons emulation"
-msgstr "Emulacija gumbova"
-
-#: ../../install_steps_interactive.pm_.c:283
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 gumba"
-
-#: ../../install_steps_interactive.pm_.c:284
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 gumba"
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "Configuring PCMCIA cards..."
-msgstr "Podešavam PCMCIA kartice..."
-
-#: ../../install_steps_interactive.pm_.c:305
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "Configuring IDE"
-msgstr "Podešavam IDE"
-
-#: ../../install_steps_interactive.pm_.c:312
-msgid "IDE"
-msgstr "IDE"
-
-#: ../../install_steps_interactive.pm_.c:327
-msgid "no available partitions"
-msgstr "nema dostupnih particija"
-
-#: ../../install_steps_interactive.pm_.c:330
-msgid "Scanning partitions to find mount points"
-msgstr "Tražim particije kako bi pronašao mjesta montiranja"
-
-#: ../../install_steps_interactive.pm_.c:338
-msgid "Choose the mount points"
-msgstr "Odaberite mjesta montiranja"
-
-#: ../../install_steps_interactive.pm_.c:357
-#, c-format
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I can try to go on blanking bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to disallow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ne mogu pročitati particijsku tablicu, previše je koruptirana za mene :(\n"
-"Mogu pokušati sa brisanjem loših particija (SVI PODACI će biti "
-"izgubljeni!).\n"
-"Drugo rješenje je onemogućiti DrakX-u da mjenja particijsku tablicu.\n"
-"(greška je %s)\n"
-"\n"
-"Da li se slažete da izgubite sve particije?\n"
-
-#: ../../install_steps_interactive.pm_.c:370
-msgid ""
-"DiskDrake failed to read correctly the partition table.\n"
-"Continue at your own risk!"
-msgstr ""
-"DiskDrake nije uspio pročitati vašu particijsku tablice.\n"
-"Nastavite o vlastitoj odgovornosti."
-
-#: ../../install_steps_interactive.pm_.c:386
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema slobodnog mjesta za 1 MB bootstrap! Instalacija će nastaviti, ali za "
-"podizanje vašeg sustava, trebati ćete napraviti bootstrap particiju u "
-"DiskDrake-u"
-
-#: ../../install_steps_interactive.pm_.c:395
-msgid "No root partition found to perform an upgrade"
-msgstr "Niti jedna root particija nije pronađena da se obavi dogradnja"
-
-#: ../../install_steps_interactive.pm_.c:396
-msgid "Root Partition"
-msgstr "Korijenska particija"
-
-#: ../../install_steps_interactive.pm_.c:397
-msgid "What is the root partition (/) of your system?"
-msgstr "Koja je korijenska particija (/) vašeg sustava?"
-
-#: ../../install_steps_interactive.pm_.c:411
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Morate ponovo pokrenuti sustav kako bi se aktivirala promjena particijske "
-"tablice"
-
-#: ../../install_steps_interactive.pm_.c:435
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje želite formatirati"
-
-#: ../../install_steps_interactive.pm_.c:436
-msgid "Check bad blocks?"
-msgstr "Provjeri za loše blokove?"
-
-#: ../../install_steps_interactive.pm_.c:462
-msgid "Formatting partitions"
-msgstr "Formatiram particije"
-
-#: ../../install_steps_interactive.pm_.c:464
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Stvaram i formatiram datoteku %s"
-
-#: ../../install_steps_interactive.pm_.c:467
-msgid "Not enough swap to fulfill installation, please add some"
-msgstr "Nema dovoljno swapa za završetak instalacije, molim dodajte još"
-
-#: ../../install_steps_interactive.pm_.c:473
-msgid "Looking for available packages"
-msgstr "Tražim dostupne pakete"
-
-#: ../../install_steps_interactive.pm_.c:479
-msgid "Finding packages to upgrade"
-msgstr "Tražim pakete koje mogu nadograditi"
-
-#: ../../install_steps_interactive.pm_.c:496
-#, c-format
-msgid ""
-"Your system has not enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-"Vaš sustav nema dovoljno prostora za instalaciju ili dogradnju (%d > %d)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Complete (%dMB)"
-msgstr "Kompletno (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Minimum (%dMB)"
-msgstr "Minimum (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:515
-#, c-format
-msgid "Recommended (%dMB)"
-msgstr "Preporučeno (%dMB)"
-
-#: ../../install_steps_interactive.pm_.c:568
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
-"Molimo izaberite učitivanje ili spremanje izbora paketa na disketu.\n"
-"Format je isto kao auto_install napravljene diskete."
-
-#: ../../install_steps_interactive.pm_.c:571
-msgid "Load from floppy"
-msgstr "Učitaj sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Loading from floppy"
-msgstr "Učitavam sa diskete"
-
-#: ../../install_steps_interactive.pm_.c:573
-msgid "Package selection"
-msgstr "Odabir paketa"
-
-#: ../../install_steps_interactive.pm_.c:578
-msgid "Insert a floppy containing package selection"
-msgstr "Umetnite disketu koja sadržava izbor paketa"
-
-#: ../../install_steps_interactive.pm_.c:590
-msgid "Save on floppy"
-msgstr "Spremi na disketu"
-
-#: ../../install_steps_interactive.pm_.c:658
-msgid "Selected size is larger than available space"
-msgstr "Izabrana veličina je veća nego raspoloživ prostor"
-
-#: ../../install_steps_interactive.pm_.c:671
-msgid "Type of install"
-msgstr "Tip instalacije"
-
-#: ../../install_steps_interactive.pm_.c:672
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Niste izabrali niti jednu grupu paketa\n"
-"Izaberite minimalnu instalaciju ako želite"
-
-#: ../../install_steps_interactive.pm_.c:675
-msgid "With X"
-msgstr "Sa X-ima"
-
-#: ../../install_steps_interactive.pm_.c:677
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporučeno!)"
-
-#: ../../install_steps_interactive.pm_.c:678
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno malena instalacija (posebice bez urpmia)"
-
-#: ../../install_steps_interactive.pm_.c:762
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve dolje navedene CDove kliknite U redu.\n"
-"Ako nemate niti jedan od navedenih CD kliknite Odustani.\n"
-"Ako imate samo neke od dolje navedenih CDa odznačite one koje nemate i "
-"kliknite U redu."
-
-#: ../../install_steps_interactive.pm_.c:767
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom naslovljen \"%s\""
-
-#: ../../install_steps_interactive.pm_.c:787
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../install_steps_interactive.pm_.c:796
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm_.c:842
-msgid "Post-install configuration"
-msgstr "Postava nakon instalacije"
-
-#: ../../install_steps_interactive.pm_.c:848
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Molim, umetnite Boot disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:854
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Molim, umetnite Update Modules disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:874
-msgid ""
-"You have now the possibility to download software aimed for encryption.\n"
-"\n"
-"WARNING:\n"
-"\n"
-"Due to different general requirements applicable to these software and "
-"imposed\n"
-"by various jurisdictions, customer and/or end user of theses software "
-"should\n"
-"ensure that the laws of his/their jurisdiction allow him/them to download, "
-"stock\n"
-"and/or use these software.\n"
-"\n"
-"In addition customer and/or end user shall particularly be aware to not "
-"infringe\n"
-"the laws of his/their jurisdiction. Should customer and/or end user not\n"
-"respect the provision of these applicable laws, he/they will incure serious\n"
-"sanctions.\n"
-"\n"
-"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be "
-"liable\n"
-"for special, indirect or incidental damages whatsoever (including, but not\n"
-"limited to loss of profits, business interruption, loss of commercial data "
-"and\n"
-"other pecuniary losses, and eventual liabilities and indemnification to be "
-"paid\n"
-"pursuant to a court decision) arising out of use, possession, or the sole\n"
-"downloading of these software, to which customer and/or end user could\n"
-"eventually have access after having sign up the present agreement.\n"
-"\n"
-"\n"
-"For any queries relating to these agreement, please contact \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-msgstr ""
-"Sada imate mogućnost za skidanje software-a za enkripciju.\n"
-"\n"
-"UPOZORENJE:\n"
-"\n"
-"Zbog različitih općih zahtjeva primjenjivih na ovaj software i presuda\n"
-"raznih sudova, kupac i/ili krajnji korisnik ovog software-a treba se\n"
-"uvjeriti da zakoni njegovog/e sudstva dozvoljava mu/joj da skine, spremi\n"
-"i/ili koristi ovaj software.\n"
-"\n"
-"U dodatku kupac i/ili krajnji korisnik mora dijelom biti svjestan da ne "
-"prekrši\n"
-"zakon svoga sudstva. Ukoliko kupac i/ili krajnji korisnik ne \n"
-"poštuje stavke tih primjenjivih zakona, može ga dovesti do ozbiljnih\n"
-"sankcija.\n"
-"\n"
-"U bilo kojem slučaju Mandrakesoft ili njegovi proizvođači i/ili nabavljačine "
-"mogu biti odgovorni\n"
-"za specijalne, indirektne ili slučajne štete bilo kako (uključujući, ali ne\n"
-"ograničana na gubitak profita, prekid posla, gubitak komercijalnih podataka\n"
-"i\n"
-"drugih novčanih gubitaka, i eventualne odgovornosti i isplate naknade što "
-"treba biti plaćeno\n"
-"odlukom suda) što je posljedica korištenja, posjedovanja ili samog\n"
-"skidanja ovog software-a, kojemu će kupac i/ili krajnji korisnik može\n"
-"eventualno imati pristup poslije potpisivanja postojećeg ugovora/dogovora.\n"
-"\n"
-"\n"
-"Za bilo kakve upite u svezi ovog ugovora, molimo kontaktirajte \n"
-"Mandrakesoft, Inc.\n"
-"2400 N. Lincoln Avenue Suite 243\n"
-"Altadena California 91001\n"
-"USA"
-
-#: ../../install_steps_interactive.pm_.c:912
-#, fuzzy
-msgid ""
-"You have now the possibility to download updated packages that have\n"
-"been released after the distribution has been made available.\n"
-"\n"
-"You will get security fixes or bug fixes, but you need to have an\n"
-"Internet connection configured to proceed.\n"
-"\n"
-"Do you want to install the updates ?"
-msgstr ""
-"Imate mogućnost skidanja (downloada) paketa za dogradnju koji su\n"
-"izašli poslije nego što je distribucija postala raspoloživa.\n"
-"\n"
-"Dobiti ćete sigurnosne popravke i popravke od grešaka, ali trebate imati\n"
-"Internet vezu konfiguriranu za nastavak.\n"
-"\n"
-"Da li želite nastaviti ?"
-
-#: ../../install_steps_interactive.pm_.c:926
-msgid "Contacting Mandrake Linux web site to get the list of available mirrors"
-msgstr ""
-"Kontaktiram Mandrake Linux web site za dobivanje popisa raspoloživih mirrora"
-
-#: ../../install_steps_interactive.pm_.c:931
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg želite skinuti pakete"
-
-#: ../../install_steps_interactive.pm_.c:940
-msgid "Contacting the mirror to get the list of available packages"
-msgstr "Spajam se na mirror kako bih pribavio popis dostupnih paketa"
-
-#: ../../install_steps_interactive.pm_.c:967
-msgid "Which is your timezone?"
-msgstr "Koja je vaša vremenska zona?"
-
-#: ../../install_steps_interactive.pm_.c:972
-msgid "Hardware clock set to GMT"
-msgstr "Vaš hardverski sat namješten je na GMT"
-
-#: ../../install_steps_interactive.pm_.c:973
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska vremenska sinkronizacija (koristeći NTP)"
-
-#: ../../install_steps_interactive.pm_.c:980
-msgid "NTP Server"
-msgstr "NTP Poslužitelj"
-
-#: ../../install_steps_interactive.pm_.c:1014
-#: ../../install_steps_interactive.pm_.c:1022
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS poslužitelj"
-
-#: ../../install_steps_interactive.pm_.c:1015
-msgid "No printer"
-msgstr "Nema pisača"
-
-#: ../../install_steps_interactive.pm_.c:1032
-msgid "Do you have an ISA sound card?"
-msgstr "Da li imate ISA zvučnu karticu?"
-
-#: ../../install_steps_interactive.pm_.c:1034
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Pokrenite \"sndconfig\" poslije instalacije za podešavanje vaše zvučne "
-"kartice"
-
-#: ../../install_steps_interactive.pm_.c:1036
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije pronađena zvučna kartica. Probajte \"harddrake\" poslije instalacije"
-
-#: ../../install_steps_interactive.pm_.c:1041 ../../steps.pm_.c:27
-msgid "Summary"
-msgstr "Sumarno"
-
-#: ../../install_steps_interactive.pm_.c:1044
-msgid "Mouse"
-msgstr "Miš"
-
-#: ../../install_steps_interactive.pm_.c:1046
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: ../../install_steps_interactive.pm_.c:1047 ../../printerdrake.pm_.c:2276
-#: ../../printerdrake.pm_.c:2354
-msgid "Printer"
-msgstr "Pisac"
-
-#: ../../install_steps_interactive.pm_.c:1049
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: ../../install_steps_interactive.pm_.c:1052
-#: ../../install_steps_interactive.pm_.c:1054
-msgid "Sound card"
-msgstr "Zvučna kartica"
-
-#: ../../install_steps_interactive.pm_.c:1056
-msgid "TV card"
-msgstr "TV kartica"
-
-#: ../../install_steps_interactive.pm_.c:1094
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1122
-msgid "LDAP"
-msgstr "LDAP"
-
-#: ../../install_steps_interactive.pm_.c:1095
-#: ../../install_steps_interactive.pm_.c:1118
-#: ../../install_steps_interactive.pm_.c:1131
-msgid "NIS"
-msgstr "NIS"
-
-#: ../../install_steps_interactive.pm_.c:1096
-#: ../../install_steps_interactive.pm_.c:1118
-msgid "Local files"
-msgstr "Lokalne datoteke"
-
-#: ../../install_steps_interactive.pm_.c:1105
-#: ../../install_steps_interactive.pm_.c:1106 ../../steps.pm_.c:24
-msgid "Set root password"
-msgstr "Podešavanje root lozinke"
-
-#: ../../install_steps_interactive.pm_.c:1107
-msgid "No password"
-msgstr "Bez lozinke"
-
-#: ../../install_steps_interactive.pm_.c:1112
-#, c-format
-msgid "This password is too simple (must be at least %d characters long)"
-msgstr ""
-"Ova lozinka je prejednostavna (lozinka mora sadržavati barem %d znakova)"
-
-#: ../../install_steps_interactive.pm_.c:1118 ../../network/modem.pm_.c:49
-#: ../../standalone/draknet_.c:626 ../../standalone/logdrake_.c:172
-msgid "Authentication"
-msgstr "Provjera autentičnosti"
-
-#: ../../install_steps_interactive.pm_.c:1126
-msgid "Authentication LDAP"
-msgstr "LDAP Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1127
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: ../../install_steps_interactive.pm_.c:1128
-msgid "LDAP Server"
-msgstr "LDAP Poslužitelj"
-
-#: ../../install_steps_interactive.pm_.c:1134
-msgid "Authentication NIS"
-msgstr "NIS Autentifikacija"
-
-#: ../../install_steps_interactive.pm_.c:1135
-msgid "NIS Domain"
-msgstr "NIS domena"
-
-#: ../../install_steps_interactive.pm_.c:1136
-msgid "NIS Server"
-msgstr "NIS Poslužitelj"
-
-#: ../../install_steps_interactive.pm_.c:1171
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Proizvoljna boot disketa omogućava način podizanja vašeg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne želite "
-"instalirati\n"
-"SILO na vaš sustav, ili je drugi operativni sustav uklonio SILO, ili SILO "
-"ne\n"
-"želi raditi sa vašom konfiguracijom hardware-a. Proizvoljna boot disketa "
-"također može biti korištena sa\n"
-"Mandrake spasonosnom slikom, omogućavajući tako lakše spašavanje od raznih "
-"sustavskih\n"
-"grešaka.\n"
-"\n"
-"Ako želite napraviti boot disketu za vaš sustav, ubacite disketu u prvi\n"
-" pogon i pritisnite \"U redu\"."
-
-#: ../../install_steps_interactive.pm_.c:1187
-msgid "First floppy drive"
-msgstr "Prvi disketni pogon"
-
-#: ../../install_steps_interactive.pm_.c:1188
-msgid "Second floppy drive"
-msgstr "Drugi disketni pogon"
-
-#: ../../install_steps_interactive.pm_.c:1189 ../../printerdrake.pm_.c:1848
-msgid "Skip"
-msgstr "Preskoči"
-
-#: ../../install_steps_interactive.pm_.c:1194
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Proizvoljna boot disketa omogućava način podizanja vašeg Linux sustava bez\n"
-"ovisnosti o normalnom bootloader-u. Ovo je korisno ukoliko ne želite "
-"instalirati\n"
-"LILO (ili grub) na vaš sustav, ili je drugi operativni sustav uklonio LILO, "
-"ili LILO ne\n"
-"želi raditi sa vašom konfiguracijom hardware-a. Proizvoljna boot disketa "
-"također može biti korištena sa\n"
-"Mandrake spasonosnom slikom, omogućavajući tako lakše spašavanje od raznih\n"
-" sustavskih grešaka.\n"
-"Da li želite napraviti proizvoljnu boot disketu za vaš sustav?\n"
-"%s"
-
-#: ../../install_steps_interactive.pm_.c:1200
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../install_steps_interactive.pm_.c:1208
-msgid "Sorry, no floppy drive available"
-msgstr "Žalim, međutim disketni pogon nije dostupan"
-
-#: ../../install_steps_interactive.pm_.c:1212
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Izaberite disketni pogon koji želite koristiti za izradu boot diskete"
-
-#: ../../install_steps_interactive.pm_.c:1216
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Umetnite disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:1219
-msgid "Creating bootdisk"
-msgstr "Stvaram boot disketu"
-
-#: ../../install_steps_interactive.pm_.c:1226
-msgid "Preparing bootloader"
-msgstr "Pripremam bootloader"
-
-#: ../../install_steps_interactive.pm_.c:1237
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX to boot your machine"
-msgstr ""
-"Čini se da imate OldWorld ili Nepoznato\n"
-" računalo, yaboot bootloader neće moći raditi kod vas.\n"
-"Instalacija će nastaviti, ali ćete morati\n"
-" koristiti BootX da podignete vaše računalo"
-
-#: ../../install_steps_interactive.pm_.c:1243
-msgid "Do you want to use aboot?"
-msgstr "Da li želite koristiti aboot?"
-
-#: ../../install_steps_interactive.pm_.c:1246
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Greška prilikom instalacije aboot-a, \n"
-"probati nasilno instalirati iako to može uništiti prvu particiju?"
-
-#: ../../install_steps_interactive.pm_.c:1253
-msgid "Installing bootloader"
-msgstr "Instaliranje bootloadera"
-
-#: ../../install_steps_interactive.pm_.c:1259
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr ""
-"Instalacija bootloader-a nije uspjela. Prijavljena je slijedeća grešska:"
-
-#: ../../install_steps_interactive.pm_.c:1267
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Trebati ćete promjeniti vaš Otvoreni Firmware boot-uređaj kako bi\n"
-" omogućili bootloader. Ukoliko ne želite vidjeti bootloader prompt pri\n"
-" podizanju, pritisnite Command-Option-O-F pri podizanju i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Tada napišite: shut-down\n"
-"Pri slijedećem podizanju trebali biste vidjeti prompt bootloadera."
-
-#: ../../install_steps_interactive.pm_.c:1311
-#: ../../standalone/drakautoinst_.c:81
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Umetnite praznu disketu u pogon %s"
-
-#: ../../install_steps_interactive.pm_.c:1315
-#: ../../standalone/drakautoinst_.c:83
-msgid "Creating auto install floppy"
-msgstr "Pravim auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1326
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Niste završili sve korake.\n"
-"\n"
-"Želite li zaista završiti?"
-
-#: ../../install_steps_interactive.pm_.c:1337
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Čestitam, instalacija je kompletna.\n"
-"Uklonite boot medij i pritisnite return za ponovno podizanje.\n"
-"\n"
-"\n"
-"Za informacije o popravcima koji su raspoloživi za ovo izdanje Mandrake "
-"Linux-a,\n"
-"konzultirajte Eratu raspoloživu na\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/82errata.php3\n"
-"\n"
-"\n"
-"Informacije o konfiguriranju vašeg sustava je raspoloživo u poslije\n"
-"instalacijskom poglavlju od Official Mandrake Linux User's Guide."
-
-#: ../../install_steps_interactive.pm_.c:1354
-msgid "Generate auto install floppy"
-msgstr "Napravi auto instalacijsku disketu"
-
-#: ../../install_steps_interactive.pm_.c:1356
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Auto instalacija može biti potpuno automatska ukoliko želite,\n"
-"u tom slučaju će preuzeti hard disk!!\n"
-"(ovo znači za instalaciju na drugo računalo).\n"
-"\n"
-"Možete preferirati da ponovite instalaciju.\n"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Automated"
-msgstr "Automatski"
-
-#: ../../install_steps_interactive.pm_.c:1361
-msgid "Replay"
-msgstr "Ponovno prikaži"
-
-#: ../../install_steps_interactive.pm_.c:1364
-msgid "Save packages selection"
-msgstr "Spremi odabir paketa"
-
-#: ../../install_steps_newt.pm_.c:22
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux instalacija %s"
-
-#: ../../install_steps_newt.pm_.c:34
-msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> između elemenata | <Space> bira | <F12> slijedeći zaslon"
-
-#: ../../interactive.pm_.c:87
-msgid "kdesu missing"
-msgstr "kdesu nedostaje"
-
-#: ../../interactive.pm_.c:89 ../../interactive.pm_.c:100
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../interactive.pm_.c:152
-msgid "Choose a file"
-msgstr "Izaberite datoteku"
-
-#: ../../interactive.pm_.c:314
-msgid "Advanced"
-msgstr "Napredno"
-
-#: ../../interactive.pm_.c:315
-msgid "Basic"
-msgstr "Osnovno"
-
-#: ../../interactive.pm_.c:386
-msgid "Please wait"
-msgstr "Molim pričekajte"
-
-#: ../../interactive_gtk.pm_.c:605 ../../services.pm_.c:222
-msgid "Info"
-msgstr "Info"
-
-#: ../../interactive_gtk.pm_.c:715
-msgid "Expand Tree"
-msgstr "Proširi stablo"
-
-#: ../../interactive_gtk.pm_.c:716
-msgid "Collapse Tree"
-msgstr "Sažmi stablo"
-
-#: ../../interactive_gtk.pm_.c:717
-msgid "Toggle between flat and group sorted"
-msgstr "Prebaci između ravno i grupno sortiranog"
-
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
-msgid "Bad choice, try again\n"
-msgstr "Krivi izbor, pokušajte ponovo\n"
-
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vaš izbor? (uobičajeno %s) "
-
-#: ../../interactive_stdio.pm_.c:52
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Unosi koje trebate popuniti:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:68
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Vaš izbor? (0/1, uobičajeno '%s') "
-
-#: ../../interactive_stdio.pm_.c:93
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Gumb `%s': %s"
-
-#: ../../interactive_stdio.pm_.c:94
-msgid "Do you want to click on this button? "
-msgstr "Da li želite kliknuti na ovaj gumb? "
-
-#: ../../interactive_stdio.pm_.c:103
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Vaš izbor? (uobičajeno `%s'%s) "
-
-#: ../../interactive_stdio.pm_.c:121
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari za odabir iz (%s).\n"
-
-#: ../../interactive_stdio.pm_.c:124
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Molim, izaberite prvi broj do 10 kojeg želite urediti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"Vaš izbor? "
-
-#: ../../interactive_stdio.pm_.c:137
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Obavijest, naziv promijenjen:\n"
-"%s"
-
-#: ../../interactive_stdio.pm_.c:144
-msgid "Re-submit"
-msgstr "Ponovno Pošalji"
-
-#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:205
-msgid "Czech (QWERTZ)"
-msgstr "Češka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:175 ../../keyboard.pm_.c:207
-msgid "German"
-msgstr "Njemačka"
-
-#: ../../keyboard.pm_.c:176
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:214
-msgid "Spanish"
-msgstr "Španjolska"
-
-#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:215
-msgid "Finnish"
-msgstr "Finska"
-
-#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:216
-msgid "French"
-msgstr "Francuska"
-
-#: ../../keyboard.pm_.c:180 ../../keyboard.pm_.c:241
-msgid "Norwegian"
-msgstr "Norveška"
-
-#: ../../keyboard.pm_.c:181
-msgid "Polish"
-msgstr "Poljska"
-
-#: ../../keyboard.pm_.c:182 ../../keyboard.pm_.c:249
-msgid "Russian"
-msgstr "Ruska"
-
-#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:251
-msgid "Swedish"
-msgstr "Švedska"
-
-#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:266
-msgid "UK keyboard"
-msgstr "UK tipkovnica"
-
-#: ../../keyboard.pm_.c:186 ../../keyboard.pm_.c:267
-msgid "US keyboard"
-msgstr "US tipkovnica"
-
-#: ../../keyboard.pm_.c:188
-msgid "Albanian"
-msgstr "Albanska"
-
-#: ../../keyboard.pm_.c:189
-msgid "Armenian (old)"
-msgstr "Armenska (stara)"
-
-#: ../../keyboard.pm_.c:190
-msgid "Armenian (typewriter)"
-msgstr "Armenska (pisaća mašina)"
-
-#: ../../keyboard.pm_.c:191
-msgid "Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:196
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbejdžanska (latinica)"
-
-#: ../../keyboard.pm_.c:198
-msgid "Belgian"
-msgstr "Belgijska"
-
-#: ../../keyboard.pm_.c:199
-#, fuzzy
-msgid "Bulgarian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: ../../keyboard.pm_.c:200
-#, fuzzy
-msgid "Bulgarian (BDS)"
-msgstr "Bugarska"
-
-#: ../../keyboard.pm_.c:201
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
-
-#: ../../keyboard.pm_.c:202
-msgid "Belarusian"
-msgstr "Bjeloruska"
-
-#: ../../keyboard.pm_.c:203
-msgid "Swiss (German layout)"
-msgstr "Švicarska (Njemački raspored)"
-
-#: ../../keyboard.pm_.c:204
-msgid "Swiss (French layout)"
-msgstr "Švicarska (francuski raspored)"
-
-#: ../../keyboard.pm_.c:206
-msgid "Czech (QWERTY)"
-msgstr "Češka (QWERTY)"
-
-#: ../../keyboard.pm_.c:208
-msgid "German (no dead keys)"
-msgstr "Njemačka (bez mrtvih tipaka)"
-
-#: ../../keyboard.pm_.c:209
-msgid "Danish"
-msgstr "Danska"
-
-#: ../../keyboard.pm_.c:210
-msgid "Dvorak (US)"
-msgstr "Dvorak (USA)"
-
-#: ../../keyboard.pm_.c:211
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveška)"
-
-#: ../../keyboard.pm_.c:212
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (Švedska)"
-
-#: ../../keyboard.pm_.c:213
-msgid "Estonian"
-msgstr "Estonska"
-
-#: ../../keyboard.pm_.c:217
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Gruzijska (\"Ruski\" raspored)"
-
-#: ../../keyboard.pm_.c:218
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Gruzijska (\"Latin\" raspored)"
-
-#: ../../keyboard.pm_.c:219
-msgid "Greek"
-msgstr "Grčka"
-
-#: ../../keyboard.pm_.c:220
-msgid "Hungarian"
-msgstr "Mađarska"
-
-#: ../../keyboard.pm_.c:221
-msgid "Croatian"
-msgstr "Hrvatska"
-
-#: ../../keyboard.pm_.c:222
-msgid "Israeli"
-msgstr "Izraelska"
-
-#: ../../keyboard.pm_.c:223
-msgid "Israeli (Phonetic)"
-msgstr "Izraelska (fonetska)"
-
-#: ../../keyboard.pm_.c:224
-msgid "Iranian"
-msgstr "Iranska"
-
-#: ../../keyboard.pm_.c:225
-msgid "Icelandic"
-msgstr "Islandska"
-
-#: ../../keyboard.pm_.c:226
-msgid "Italian"
-msgstr "Talijanska"
-
-#: ../../keyboard.pm_.c:228
-msgid "Japanese 106 keys"
-msgstr "Japanska (106 tipaka)"
-
-#: ../../keyboard.pm_.c:231
-msgid "Korean keyboard"
-msgstr "Korejska tipkovnica"
-
-#: ../../keyboard.pm_.c:232
-msgid "Latin American"
-msgstr "Latino američka"
-
-#: ../../keyboard.pm_.c:233
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanska AZERTY (stara)"
-
-#: ../../keyboard.pm_.c:235
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanska AZERTY (nova)"
-
-#: ../../keyboard.pm_.c:236
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanska \"number row\" QWERTY"
-
-#: ../../keyboard.pm_.c:237
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanska \"fonetska\" QWERTY"
-
-#: ../../keyboard.pm_.c:238
-msgid "Latvian"
-msgstr "Latvija"
-
-#: ../../keyboard.pm_.c:239
-msgid "Macedonian"
-msgstr "Makedonska"
-
-#: ../../keyboard.pm_.c:240
-msgid "Dutch"
-msgstr "Nizozemska"
-
-#: ../../keyboard.pm_.c:242
-msgid "Polish (qwerty layout)"
-msgstr "Poljska (qwerty raspored)"
-
-#: ../../keyboard.pm_.c:243
-msgid "Polish (qwertz layout)"
-msgstr "Poljska (qwertz raspored)"
-
-#: ../../keyboard.pm_.c:244
-msgid "Portuguese"
-msgstr "Portugalska"
-
-#: ../../keyboard.pm_.c:245
-msgid "Canadian (Quebec)"
-msgstr "Kanadska (Quebec)"
-
-#: ../../keyboard.pm_.c:247
-msgid "Romanian (qwertz)"
-msgstr "Rumunjska (qwertz)"
-
-#: ../../keyboard.pm_.c:248
-msgid "Romanian (qwerty)"
-msgstr "Rumunjska (qwerty)"
-
-#: ../../keyboard.pm_.c:250
-msgid "Russian (Yawerty)"
-msgstr "Ruska (Yawerty)"
-
-#: ../../keyboard.pm_.c:252
-msgid "Slovenian"
-msgstr "Slovenska"
-
-#: ../../keyboard.pm_.c:253
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovačka (QWERTZ)"
-
-#: ../../keyboard.pm_.c:254
-msgid "Slovakian (QWERTY)"
-msgstr "Slovačka (QWERTY)"
-
-#: ../../keyboard.pm_.c:256
-msgid "Serbian (cyrillic)"
-msgstr "Srpska (čirilica)"
-
-#: ../../keyboard.pm_.c:258
-#, fuzzy
-msgid "Tamil"
-msgstr "Tablica"
-
-#: ../../keyboard.pm_.c:259
-msgid "Thai keyboard"
-msgstr "Tajlandska tipkovnica"
-
-#: ../../keyboard.pm_.c:261
-msgid "Tajik keyboard"
-msgstr "Tajik tipkovnica"
-
-#: ../../keyboard.pm_.c:262
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
-
-#: ../../keyboard.pm_.c:263
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turska (moderna \"Q\" model)"
-
-#: ../../keyboard.pm_.c:265
-msgid "Ukrainian"
-msgstr "Ukrajinska"
-
-#: ../../keyboard.pm_.c:268
-msgid "US keyboard (international)"
-msgstr "US keyboard (internacionalna)"
-
-#: ../../keyboard.pm_.c:269
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamska \"numeric row\" QWERTY"
-
-#: ../../keyboard.pm_.c:270
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslavenska (latinična)"
-
-#: ../../keyboard.pm_.c:278
-msgid "Right Alt key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:279
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:280
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:281
-msgid "CapsLock key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:282
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:283
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: ../../keyboard.pm_.c:284
-msgid "\"Menu\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:285
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: ../../keyboard.pm_.c:286
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: ../../loopback.pm_.c:32
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kružno montiranje %s\n"
-
-#: ../../lvm.pm_.c:88
-msgid "Remove the logical volumes first\n"
-msgstr "Ukloni logički volumen prvo\n"
-
-#: ../../modules.pm_.c:826
-msgid ""
-"PCMCIA support no longer exist for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"PCMCIA podrška više ne postoji za 2.2 kernele. Molimo koristite 2.4 kernel."
-
-#: ../../mouse.pm_.c:25
-msgid "Sun - Mouse"
-msgstr "Sun - miš"
-
-#: ../../mouse.pm_.c:32
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: ../../mouse.pm_.c:33
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generički PS2 miš s kotačićem"
-
-#: ../../mouse.pm_.c:34
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: ../../mouse.pm_.c:38
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68
-msgid "1 button"
-msgstr "1 gumb"
-
-#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51
-msgid "Generic 2 Button Mouse"
-msgstr "Generički miš s 2 gumba"
-
-#: ../../mouse.pm_.c:45
-msgid "Generic"
-msgstr "Generički"
-
-#: ../../mouse.pm_.c:46
-msgid "Wheel"
-msgstr "Kotačić"
-
-#: ../../mouse.pm_.c:49
-msgid "serial"
-msgstr "serijski"
-
-#: ../../mouse.pm_.c:52
-msgid "Generic 3 Button Mouse"
-msgstr "Generički miš s 3 gumba"
-
-#: ../../mouse.pm_.c:53
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: ../../mouse.pm_.c:54
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: ../../mouse.pm_.c:55
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: ../../mouse.pm_.c:57
-msgid "Logitech CC Series"
-msgstr "Logitech CC serije"
-
-#: ../../mouse.pm_.c:58
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: ../../mouse.pm_.c:60
-msgid "MM Series"
-msgstr "MM Serije"
-
-#: ../../mouse.pm_.c:61
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: ../../mouse.pm_.c:62
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Miš (serijski, stari C7 tip)"
-
-#: ../../mouse.pm_.c:66
-msgid "busmouse"
-msgstr "busmiš"
-
-#: ../../mouse.pm_.c:69
-msgid "2 buttons"
-msgstr "2 gumba"
-
-#: ../../mouse.pm_.c:70
-msgid "3 buttons"
-msgstr "3 gumba"
-
-#: ../../mouse.pm_.c:73
-msgid "none"
-msgstr "niti jedan"
-
-#: ../../mouse.pm_.c:75
-msgid "No mouse"
-msgstr "Nema miša"
-
-#: ../../mouse.pm_.c:499
-msgid "Please test the mouse"
-msgstr "Molimo istestirajte miša."
-
-#: ../../mouse.pm_.c:500
-msgid "To activate the mouse,"
-msgstr "Za aktiviranje miša,"
-
-#: ../../mouse.pm_.c:501
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMAKNITE VAŠ KOTAČIĆ!"
-
-#: ../../my_gtk.pm_.c:651
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-2,*-r-*"
-
-#: ../../my_gtk.pm_.c:686
-msgid "Finish"
-msgstr "Završi"
-
-#: ../../my_gtk.pm_.c:686 ../../printerdrake.pm_.c:1588
-msgid "Next ->"
-msgstr "Slijedeće ->"
-
-#: ../../my_gtk.pm_.c:687 ../../printerdrake.pm_.c:1586
-msgid "<- Previous"
-msgstr "<- Prijašnje"
-
-#: ../../my_gtk.pm_.c:1019
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../network/adsl.pm_.c:19 ../../network/ethernet.pm_.c:36
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
-
-#: ../../network/adsl.pm_.c:20
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few ones use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Najčešći način da se povežete sa adsl-om je pppoe.\n"
-"Neke veze koriste pptp, a nekoliko koriste dhcp.\n"
-"Ukoliko neznate, izaberite 'koristi pppoe'"
-
-#: ../../network/adsl.pm_.c:22
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use dhcp"
-msgstr "koristi dhcp"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pppoe"
-msgstr "koristi pppoe"
-
-#: ../../network/adsl.pm_.c:22
-msgid "use pptp"
-msgstr "koristi pptp"
-
-#: ../../network/ethernet.pm_.c:37
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcpcd"
-msgstr ""
-"Koji dhcp klijent želite koristiti?\n"
-"Pretpostavljeni je dhcpcd"
-
-#: ../../network/ethernet.pm_.c:88
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Nije pronađen niti jedan mrežni adapter na vašem sustavu.\n"
-"Ne mogu postaviti ovu vrstu veze."
-
-#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:252
-msgid "Choose the network interface"
-msgstr "Odaberite mrežni međusklop"
-
-#: ../../network/ethernet.pm_.c:93
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet"
-msgstr ""
-"Molimo izaberite sa kojim mrežnim adapterom se želite priključiti na Internet"
-
-#: ../../network/ethernet.pm_.c:178
-msgid "no network card found"
-msgstr "ne mogu pronaći niti jednu mrežnu karticu"
-
-#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:360
-msgid "Configuring network"
-msgstr "Podešavam mrežu"
-
-#: ../../network/ethernet.pm_.c:203
-msgid ""
-"Please enter your host name if you know it.\n"
-"Some DHCP servers require the hostname to work.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''."
-msgstr ""
-"Molim unesite ime računala ukoliko ga znate.\n"
-"Neki DHCP serveri zahtjevaju specifiranje imena računala da bi radili.\n"
-"Vaše ime računala bi trebalo biti potpuno-kvalificirano ime računala,\n"
-"kao što je ``mybox.mylab.myco.com''."
-
-#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:365
-msgid "Host name"
-msgstr "Ime računala"
-
-#: ../../network/isdn.pm_.c:21 ../../network/isdn.pm_.c:44
-#: ../../network/netconnect.pm_.c:95 ../../network/netconnect.pm_.c:109
-#: ../../network/netconnect.pm_.c:164 ../../network/netconnect.pm_.c:175
-#: ../../network/netconnect.pm_.c:202 ../../network/netconnect.pm_.c:225
-#: ../../network/netconnect.pm_.c:233
-msgid "Network Configuration Wizard"
-msgstr "Čarobnjak mrežnih postavki"
-
-#: ../../network/isdn.pm_.c:22
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
-
-#: ../../network/isdn.pm_.c:22
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
-
-#: ../../network/isdn.pm_.c:22
-msgid "What kind is your ISDN connection?"
-msgstr "Kakav tip ISDN veze koristite ?"
-
-#: ../../network/isdn.pm_.c:45
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerfull\n"
-" tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-" standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
-"Koju ISDN konfiguraciju preferirate?\n"
-"\n"
-"* Stara konfiguracija koristi isdn4net. Ona sadrži snažne\n"
-" alate, ali je teška za konfiguriranje, nije standardna.\n"
-"\n"
-"* Nova konfiguracija je lakša za razumiti, mnogo standardnija,\n"
-" ali sa manje alata.\n"
-"\n"
-"Preporučamo laku konfiguraciju.\n"
-
-#: ../../network/isdn.pm_.c:54
-msgid "New configuration (isdn-light)"
-msgstr "Nova konfiguracija (isdn-light)"
-
-#: ../../network/isdn.pm_.c:54
-msgid "Old configuration (isdn4net)"
-msgstr "Stara konfiguracija (isdn4net)"
-
-#: ../../network/isdn.pm_.c:170 ../../network/isdn.pm_.c:188
-#: ../../network/isdn.pm_.c:198 ../../network/isdn.pm_.c:205
-#: ../../network/isdn.pm_.c:215
-msgid "ISDN Configuration"
-msgstr "ISDN postavke"
-
-#: ../../network/isdn.pm_.c:170
-msgid ""
-"Select your provider.\n"
-" If it's not in the list, choose Unlisted"
-msgstr ""
-"Izaberite vašeg pružatelja Internet usluga.\n"
-" Ako nije na popisu odaberite Drugi"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol"
-msgstr "Europski protokol"
-
-#: ../../network/isdn.pm_.c:183
-msgid "Europe protocol (EDSS1)"
-msgstr "Europski protokol (EDSS1)"
-
-#: ../../network/isdn.pm_.c:185
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../network/isdn.pm_.c:185
-msgid ""
-"Protocol for the rest of the world \n"
-" no D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (za iznajmljene linije)"
-
-#: ../../network/isdn.pm_.c:189
-msgid "Which protocol do you want to use ?"
-msgstr "Koji protokol želite koristiti ?"
-
-#: ../../network/isdn.pm_.c:199
-msgid "What kind of card do you have?"
-msgstr "Kakvu karticu posjedujete?"
-
-#: ../../network/isdn.pm_.c:200
-msgid "I don't know"
-msgstr "Ne znam"
-
-#: ../../network/isdn.pm_.c:200
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: ../../network/isdn.pm_.c:200
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm_.c:206
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the irq and io of your card.\n"
-msgstr ""
-"\n"
-"Ukoliko imate ISA karticu, vrijednosti na slijedećem zaslonu trebale bi biti "
-"dobre.\n"
-"\n"
-"Ukoliko imate PCMCIA karticu, morate znati irq i io vaše kartice.\n"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Abort"
-msgstr "Prekini"
-
-#: ../../network/isdn.pm_.c:210
-msgid "Continue"
-msgstr "Nastavi"
-
-#: ../../network/isdn.pm_.c:216
-msgid "Which is your ISDN card ?"
-msgstr "Kakvu ISDN karticu imate?"
-
-#: ../../network/isdn.pm_.c:235
-msgid ""
-"I have detected an ISDN PCI Card, but I don't know the type. Please select "
-"one PCI card on the next screen."
-msgstr ""
-"Pronašao sam ISDN PCI karticu međutim ne znam kojeg je tipa. Molim izaberite "
-"vašu PCI karticu na slijedećem ekranu."
-
-#: ../../network/isdn.pm_.c:244
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr ""
-"Nisam našao niti jednu ISDN PCI karticu. Molim izaberite vašu PCI karticu na "
-"slijedećem ekranu."
-
-#: ../../network/modem.pm_.c:39
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../network/modem.pm_.c:44
-msgid "Dialup options"
-msgstr "Podesi dialup"
-
-#: ../../network/modem.pm_.c:45 ../../standalone/draknet_.c:622
-msgid "Connection name"
-msgstr "Ime veze"
-
-#: ../../network/modem.pm_.c:46 ../../standalone/draknet_.c:623
-msgid "Phone number"
-msgstr "Telefonski broj"
-
-#: ../../network/modem.pm_.c:47 ../../standalone/draknet_.c:624
-msgid "Login ID"
-msgstr "Prijavno ime"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "PAP"
-msgstr "PAP"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Script-based"
-msgstr "Temeljem skripta"
-
-#: ../../network/modem.pm_.c:49 ../../standalone/draknet_.c:626
-msgid "Terminal-based"
-msgstr "Terminal-zasnovano"
-
-#: ../../network/modem.pm_.c:50 ../../standalone/draknet_.c:627
-msgid "Domain name"
-msgstr "Ime domene"
-
-#: ../../network/modem.pm_.c:51 ../../standalone/draknet_.c:628
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS poslužitelj (opciono)"
-
-#: ../../network/modem.pm_.c:52 ../../standalone/draknet_.c:629
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS poslužitelj (opciono)"
-
-#: ../../network/netconnect.pm_.c:34
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
-msgstr ""
-"\n"
-"Možete isključiti ili ponovno konfigurirati vašu vezu."
-
-#: ../../network/netconnect.pm_.c:34 ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"Možete ponovno konfigurirati vašu vezu."
-
-#: ../../network/netconnect.pm_.c:34
-msgid "You are currently connected to internet."
-msgstr "Trenutno ste spojeni na internet."
-
-#: ../../network/netconnect.pm_.c:37
-msgid ""
-"\n"
-"You can connect to Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"Možete se spojiti na Internet ili ponovno konfigurirati vašu vezu."
-
-#: ../../network/netconnect.pm_.c:37
-msgid "You are not currently connected to Internet."
-msgstr "Niste trenutno spojeni na Internet."
-
-#: ../../network/netconnect.pm_.c:41
-#, fuzzy
-msgid "Connect"
-msgstr "Povezan"
-
-#: ../../network/netconnect.pm_.c:43
-#, fuzzy
-msgid "Disconnect"
-msgstr "Odspoji..."
-
-#: ../../network/netconnect.pm_.c:45
-#, fuzzy
-msgid "Configure the connection"
-msgstr "Podesi mrežu"
-
-#: ../../network/netconnect.pm_.c:50
-msgid "Internet connection & configuration"
-msgstr "Internet veza i postava"
-
-#: ../../network/netconnect.pm_.c:100
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Sada ćemo podesiti %s vezu."
-
-#: ../../network/netconnect.pm_.c:109
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Sada ćemo podesiti %s vezu.\n"
-"\n"
-"\n"
-"Pritisnite U redu za nastavak."
-
-#: ../../network/netconnect.pm_.c:138 ../../network/netconnect.pm_.c:252
-#: ../../network/netconnect.pm_.c:271 ../../network/tools.pm_.c:57
-msgid "Network Configuration"
-msgstr "Mrežne postavke"
-
-#: ../../network/netconnect.pm_.c:139
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Pošto radite mrežnu instalaciju, vaša mreža je već konfigurirana.\n"
-"Pritisnite U redu da zadržite postojeće postavke, ili Odustani za ponovno "
-"konfiguriranje vaše mrežne/Internet veze.\n"
-
-#: ../../network/netconnect.pm_.c:165
-msgid ""
-"Welcome to The Network Configuration Wizard\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Dobro Došli u Čarobnjak za podešavanje mreže\n"
-"\n"
-"Sada ćemo konfigurirati vašu internet/mrežnu vezu.\n"
-"Ukoliko ne želite koristiti auto detekciju, odselektirajte kvadratić s "
-"potvrdom.\n"
-
-#: ../../network/netconnect.pm_.c:167
-msgid "Choose the profile to configure"
-msgstr "Izaberite profil za konfiguriranje"
-
-#: ../../network/netconnect.pm_.c:168
-msgid "Use auto detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../network/netconnect.pm_.c:175
-msgid "Detecting devices..."
-msgstr "Otkrivanje uređaja..."
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-msgid "Normal modem connection"
-msgstr "Normalna modemska veza"
-
-#: ../../network/netconnect.pm_.c:186 ../../network/netconnect.pm_.c:195
-#, c-format
-msgid "detected on port %s"
-msgstr "detektiran na portu %s"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-msgid "ISDN connection"
-msgstr "ISDN veza"
-
-#: ../../network/netconnect.pm_.c:187 ../../network/netconnect.pm_.c:196
-#, c-format
-msgid "detected %s"
-msgstr "detektirano %s"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-msgid "ADSL connection"
-msgstr "ADSL veza"
-
-#: ../../network/netconnect.pm_.c:188 ../../network/netconnect.pm_.c:197
-#, c-format
-msgid "detected on interface %s"
-msgstr "detektirano na međusklopu %s"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "Cable connection"
-msgstr "Kablovska veza"
-
-#: ../../network/netconnect.pm_.c:189 ../../network/netconnect.pm_.c:198
-msgid "cable connection detected"
-msgstr "detektirana kablovska veza"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "LAN connection"
-msgstr "LAN veza"
-
-#: ../../network/netconnect.pm_.c:190 ../../network/netconnect.pm_.c:199
-msgid "ethernet card(s) detected"
-msgstr "ethernet kartica(e) pronađene"
-
-#: ../../network/netconnect.pm_.c:202
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite vezu koju želite podesiti"
-
-#: ../../network/netconnect.pm_.c:226
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Odabrali ste više načina za spajanje na Internet.\n"
-"Molimo izaberite koji želite koristiti.\n"
-"\n"
-
-#: ../../network/netconnect.pm_.c:227
-msgid "Internet connection"
-msgstr "Internet veza"
-
-#: ../../network/netconnect.pm_.c:233
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li želite pokreniti vašu vezu kod svakog podizanja (boot) sustava ?"
-
-#: ../../network/netconnect.pm_.c:247
-msgid "Network configuration"
-msgstr "Mrežne postavke"
-
-#: ../../network/netconnect.pm_.c:248
-msgid "The network needs to be restarted"
-msgstr "Mreža treba biti ponovno pokrenuta"
-
-#: ../../network/netconnect.pm_.c:252
-#, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problem se pojavio prilikom ponovnog pokretanja mreže: \n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm_.c:261
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Čestitam, mrežna i internet konfiguracija je završena.\n"
-"\n"
-"Konfiguracija će sada biti primjenjena na vašem sustavu.\n"
-
-#: ../../network/netconnect.pm_.c:265
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon što je to napravljeno, preporučamo da ponovno pokrenete vaše X\n"
-"okružje kako bi izbjegli probleme prilikom promjene imena računala."
-
-#: ../../network/netconnect.pm_.c:266
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration"
-msgstr ""
-
-#: ../../network/network.pm_.c:292
-msgid ""
-"WARNING: This device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"UPOZORENJE: Ovaj uređaj je bio prethodno konfiguriran za spajanje na "
-"Internet.\n"
-"Jednostavno prihvatite ovaj uređaj konfiguriran.\n"
-"Promjena polja niže će prepisati ovu konfiguraciju."
-
-#: ../../network/network.pm_.c:297
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molim unesite IP postavke za ovaj stroj.\n"
-"Svaka stavka treba biti unesena kao IP adresa odvojena\n"
-"točkama (npr. 1.2.3.4)"
-
-#: ../../network/network.pm_.c:306 ../../network/network.pm_.c:307
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Podešavam mrežni uređaj %s"
-
-#: ../../network/network.pm_.c:307
-#, c-format
-msgid " (driver %s)"
-msgstr " (upravljački program %s)"
-
-#: ../../network/network.pm_.c:309 ../../standalone/draknet_.c:232
-#: ../../standalone/draknet_.c:468
-msgid "IP address"
-msgstr "IP adresa"
-
-#: ../../network/network.pm_.c:310 ../../standalone/draknet_.c:469
-msgid "Netmask"
-msgstr "Netmaska"
-
-#: ../../network/network.pm_.c:311
-msgid "(bootp/dhcp)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm_.c:311
-msgid "Automatic IP"
-msgstr "Automatski IP"
-
-#: ../../network/network.pm_.c:332 ../../printerdrake.pm_.c:712
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti oblika 1.2.3.4"
-
-#: ../../network/network.pm_.c:361
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one"
-msgstr ""
-"Molim unesite ime računala.\n"
-"Ime računala treba biti puno ime računala,\n"
-"primjerice mojeracunalo.odjel.domena.hr.\n"
-"Također unesite IP adresu gateway računala ako gateway postoji"
-
-#: ../../network/network.pm_.c:366
-msgid "DNS server"
-msgstr "DNS poslužitelj"
-
-#: ../../network/network.pm_.c:367
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: ../../network/network.pm_.c:369
-msgid "Gateway device"
-msgstr "Gateway uređaj"
-
-#: ../../network/network.pm_.c:381
-msgid "Proxies configuration"
-msgstr "Postava proxy-a"
-
-#: ../../network/network.pm_.c:382
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: ../../network/network.pm_.c:383
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: ../../network/network.pm_.c:384
-msgid "Track network card id (usefull for laptops)"
-msgstr "Prati id mrežne kartice (korisno za laptope)"
-
-#: ../../network/network.pm_.c:387
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
-
-#: ../../network/network.pm_.c:388
-msgid "Proxy should be ftp://..."
-msgstr "Proxy treba biti ftp://..."
-
-#: ../../network/tools.pm_.c:39
-msgid "Internet configuration"
-msgstr "Postava Interneta"
-
-#: ../../network/tools.pm_.c:40
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li želite pokušati spajanje na Internet ?"
-
-#: ../../network/tools.pm_.c:44 ../../standalone/draknet_.c:197
-msgid "Testing your connection..."
-msgstr "Testiram vašu vezu..."
-
-#: ../../network/tools.pm_.c:50
-msgid "The system is now connected to Internet."
-msgstr "Sustav je sada spojen na Internet."
-
-#: ../../network/tools.pm_.c:51
-msgid "For Security reason, it will be disconnected now."
-msgstr "Zbog sigurnosnih razloga, biti će sada odspojen."
-
-#: ../../network/tools.pm_.c:52
-msgid ""
-"The system doesn't seem to be connected to internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Čini se kako sustav nije spojen na internet.\n"
-"Probajte ponovno podesiti vašu vezu."
-
-#: ../../network/tools.pm_.c:76
-msgid "Connection Configuration"
-msgstr "Postava Veze"
-
-#: ../../network/tools.pm_.c:77
-msgid "Please fill or check the field below"
-msgstr "Molim ispunite ili provjerite vrijednost doljnjeg polja"
-
-#: ../../network/tools.pm_.c:79 ../../standalone/draknet_.c:608
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: ../../network/tools.pm_.c:80 ../../standalone/draknet_.c:609
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
-
-#: ../../network/tools.pm_.c:81 ../../standalone/draknet_.c:610
-msgid "Card IO"
-msgstr "IO kartice"
-
-#: ../../network/tools.pm_.c:82 ../../standalone/draknet_.c:611
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
-
-#: ../../network/tools.pm_.c:83 ../../standalone/draknet_.c:612
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: ../../network/tools.pm_.c:84 ../../standalone/draknet_.c:613
-msgid "Your personal phone number"
-msgstr "Vaš osobni telefonski broj"
-
-#: ../../network/tools.pm_.c:85 ../../standalone/draknet_.c:614
-msgid "Provider name (ex provider.net)"
-msgstr "Ime ISP pružatelja (npr. provider.hr)"
-
-#: ../../network/tools.pm_.c:86 ../../standalone/draknet_.c:615
-msgid "Provider phone number"
-msgstr "Telef. broj pružatelja"
-
-#: ../../network/tools.pm_.c:87 ../../standalone/draknet_.c:616
-msgid "Provider dns 1 (optional)"
-msgstr "Pružateljev DNS 1 (opciono)"
-
-#: ../../network/tools.pm_.c:88 ../../standalone/draknet_.c:617
-msgid "Provider dns 2 (optional)"
-msgstr "Pružateljev DNS 2 (opciono)"
-
-#: ../../network/tools.pm_.c:89
-msgid "Choose your country"
-msgstr "Odaberite vašu zemlju"
-
-#: ../../network/tools.pm_.c:90 ../../standalone/draknet_.c:620
-msgid "Dialing mode"
-msgstr "Način biranja"
-
-#: ../../network/tools.pm_.c:91 ../../standalone/draknet_.c:632
-msgid "Connection speed"
-msgstr "Brzina"
-
-#: ../../network/tools.pm_.c:92 ../../standalone/draknet_.c:633
-msgid "Connection timeout (in sec)"
-msgstr "Vrijeme čekanja veze (u sek)"
-
-#: ../../network/tools.pm_.c:93 ../../standalone/draknet_.c:618
-msgid "Account Login (user name)"
-msgstr "Korisničko ime"
-
-#: ../../network/tools.pm_.c:94 ../../standalone/draknet_.c:619
-msgid "Account Password"
-msgstr "Korisnička Lozinka"
-
-#: ../../partition_table.pm_.c:600
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: ../../partition_table.pm_.c:664
-msgid "Extended partition not supported on this platform"
-msgstr "Proširene particije nisu podržane na ovoj platformi"
-
-#: ../../partition_table.pm_.c:682
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions"
-msgstr ""
-"Imate rupu u svojoj particijskoj tablici međutim ja je ne mogu iskoristiti.\n"
-"Jedino rješenje je da pomaknete vašu primarnu particiju kako bi rupa bila\n"
-"odmah do proširenih particija."
-
-#: ../../partition_table.pm_.c:770
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Vraćanje iz datoteke %s nije uspjelo: %s"
-
-#: ../../partition_table.pm_.c:772
-msgid "Bad backup file"
-msgstr "Loša backup datoteka"
-
-#: ../../partition_table.pm_.c:794
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Greška prilikom pisanja u datoteku %s"
-
-#: ../../partition_table_raw.pm_.c:186
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random trash"
-msgstr ""
-"Nešto loše se dešava sa vašim pogonom. \n"
-"Test za provjeru integriteta podataka je neuspješan. \n"
-"To znači da pisanje bilo čega na vaš disk rezultira slučajnim smećem"
-
-#: ../../pkgs.pm_.c:24
-msgid "must have"
-msgstr "potrebno"
-
-#: ../../pkgs.pm_.c:25
-msgid "important"
-msgstr "važno"
-
-#: ../../pkgs.pm_.c:26
-msgid "very nice"
-msgstr "vrlo lijepo"
-
-#: ../../pkgs.pm_.c:27
-msgid "nice"
-msgstr "lijepo"
-
-#: ../../pkgs.pm_.c:28
-msgid "maybe"
-msgstr "možda"
-
-#: ../../printer.pm_.c:23
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: ../../printer.pm_.c:24
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Nova Generacija"
-
-#: ../../printer.pm_.c:25
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: ../../printer.pm_.c:26
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Ispiši, Bez Reda"
-
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
-msgid "CUPS"
-msgstr "CUPS"
-
-#: ../../printer.pm_.c:33
-msgid "LPRng"
-msgstr "LPRng"
-
-#: ../../printer.pm_.c:34
-msgid "LPD"
-msgstr "LPD"
-
-#: ../../printer.pm_.c:35
-msgid "PDQ"
-msgstr "PDQ"
-
-#: ../../printer.pm_.c:47
-msgid "Local printer"
-msgstr "Lokalni pisač"
-
-#: ../../printer.pm_.c:48
-msgid "Remote printer"
-msgstr "Udaljeni pisač"
-
-#: ../../printer.pm_.c:49
-msgid "Printer on remote CUPS server"
-msgstr "Pisač na udaljenom CUPS poslužitelju"
-
-#: ../../printer.pm_.c:50 ../../printerdrake.pm_.c:734
-msgid "Printer on remote lpd server"
-msgstr "Pisač na udaljenom lpd poslužitelju"
-
-#: ../../printer.pm_.c:51
-msgid "Network printer (TCP/Socket)"
-msgstr "Mrežni pisač (TCP/socket)"
-
-#: ../../printer.pm_.c:52
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Pisač na SMB/Windows 95/98/NT poslužitelju"
-
-#: ../../printer.pm_.c:53
-msgid "Printer on NetWare server"
-msgstr "Pisač na NetWare poslužitelju"
-
-#: ../../printer.pm_.c:54 ../../printerdrake.pm_.c:738
-msgid "Enter a printer device URI"
-msgstr "Unesite URI pisača"
-
-#: ../../printer.pm_.c:55
-msgid "Pipe job into a command"
-msgstr "Proslijedi (pipe) na komandu"
-
-#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
-msgid "Unknown model"
-msgstr "Nepoznati model"
-
-#: ../../printer.pm_.c:532
-#, fuzzy
-msgid "Local Printers"
-msgstr "Lokalni pisač"
-
-#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
-#, fuzzy
-msgid "Remote Printers"
-msgstr "Udaljeni pisač"
-
-#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:248
-#, c-format
-msgid " on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:250
-#, c-format
-msgid ", USB printer \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:549
-#, c-format
-msgid ", multi-function device on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printer.pm_.c:552
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: ../../printer.pm_.c:554
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: ../../printer.pm_.c:556
-msgid ", multi-function device"
-msgstr ""
-
-#: ../../printer.pm_.c:559
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Greška prilikom pisanja u datoteku %s"
-
-#: ../../printer.pm_.c:561
-#, c-format
-msgid "on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:563
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: ../../printer.pm_.c:567
-#, c-format
-msgid "on Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:571
-#, c-format
-msgid "on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: ../../printer.pm_.c:573
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1136
-msgid "Raw printer (No driver)"
-msgstr "Raw printer (Bez upravljačkog programa)"
-
-#: ../../printer.pm_.c:841
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: ../../printer.pm_.c:843
-msgid "(on this machine)"
-msgstr "(na ovom računalu)"
-
-#: ../../printer.pm_.c:868
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP CUPS poslužitelja"
-
-#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2391
-#: ../../printerdrake.pm_.c:2402 ../../printerdrake.pm_.c:2618
-#: ../../printerdrake.pm_.c:2670 ../../printerdrake.pm_.c:2697
-#: ../../printerdrake.pm_.c:2867 ../../printerdrake.pm_.c:2869
-msgid " (Default)"
-msgstr " (Uobičajeno)"
-
-#: ../../printerdrake.pm_.c:22
-msgid "Select Printer Connection"
-msgstr "Odaberite vezu pisača"
-
-#: ../../printerdrake.pm_.c:23
-msgid "How is the printer connected?"
-msgstr "Kako je pisač povezan?"
-
-#: ../../printerdrake.pm_.c:25
-#, fuzzy
-msgid ""
-"\n"
-"Printers on remote CUPS servers you do not have to configure here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Pisače na udaljenom CUPS poslužitelju ne morate konfigurirati\n"
-"ovdje; ti pisači će biti automatski pronađeni. Molim,\n"
-"izaberite \"Pisač na udaljenom CUPS poslužitelju\" u tom slučaju."
-
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2454
-#, fuzzy
-msgid "CUPS configuration"
-msgstr "LAN postavke"
-
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2455
-#, fuzzy
-msgid "Specify CUPS server"
-msgstr "Udaljeni CUPS poslužitelj"
-
-#: ../../printerdrake.pm_.c:71
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"do not have to configure anything; the CUPS servers inform your machine "
-"automatically about their printers. All printers currently known to your "
-"machine are listed in the \"Remote printers\" section in the main window of "
-"Printerdrake. When your CUPS server is not in your local network, you have "
-"to enter the CUPS server IP address and optionally the port number to get "
-"the printer information from the server, otherwise leave these fields blank."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:72
-msgid ""
-"\n"
-"Normally, CUPS is automatically configured according to your network "
-"environment, so that you can access the printers on the CUPS servers in your "
-"local network. If this does not work correctly, turn off \"Automatic CUPS "
-"configuration\" and edit your file /etc/cups/cupsd.conf manually. Do not "
-"forget to restart CUPS afterwards (command: \"service cups restart\")."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:76
-msgid "The IP address should look like 192.168.1.20"
-msgstr "IP adresa treba izgledati poput 192.168.1.20"
-
-#: ../../printerdrake.pm_.c:80 ../../printerdrake.pm_.c:862
-msgid "The port number should be an integer!"
-msgstr "Broj porta bi trebao biti cjelobrojni broj!"
-
-#: ../../printerdrake.pm_.c:87
-msgid "CUPS server IP"
-msgstr "IP CUPS poslužitelja"
-
-#: ../../printerdrake.pm_.c:88 ../../printerdrake.pm_.c:855
-msgid "Port"
-msgstr "Port"
-
-#: ../../printerdrake.pm_.c:90
-msgid "Automatic CUPS configuration"
-msgstr "Automatska CUPS konfiguracija"
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Detecting devices ..."
-msgstr "Otkrivanje uređaja ..."
-
-#: ../../printerdrake.pm_.c:145 ../../standalone/scannerdrake_.c:42
-msgid "Test ports"
-msgstr "Iskušaj portove"
-
-#: ../../printerdrake.pm_.c:167 ../../printerdrake.pm_.c:2437
-#: ../../printerdrake.pm_.c:2556
-#, fuzzy
-msgid "Add a new printer"
-msgstr "Nema pisača"
-
-#: ../../printerdrake.pm_.c:168
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:176 ../../printerdrake.pm_.c:203
-#: ../../printerdrake.pm_.c:378 ../../printerdrake.pm_.c:393
-#: ../../printerdrake.pm_.c:403 ../../printerdrake.pm_.c:466
-#, fuzzy
-msgid "Local Printer"
-msgstr "Lokalni pisač"
-
-#: ../../printerdrake.pm_.c:177
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in your printer(s) on this computer and turn it/them on. Click "
-"on \"Next\" when you are ready, and on \"Cancel\" when you do not want to "
-"set up your printer(s) now.\n"
-"\n"
-"Note that some computers can crash during the printer auto-detection, turn "
-"off \"Auto-detect printers\" to do a printer installation without auto-"
-"detection. Use the \"Expert Mode\" of printerdrake when you want to set up "
-"printing on a remote printer if printerdrake does not list it automatically."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:186
-#, fuzzy
-msgid "Auto-detect printers"
-msgstr "Automatski pronalazak pisača"
-
-#: ../../printerdrake.pm_.c:204
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:223
-msgid "Auto-Detection of Printers"
-msgstr "Automatski pronalazak pisača"
-
-#: ../../printerdrake.pm_.c:224
-msgid ""
-"Printerdrake is able to auto-detect your locally connected parallel and USB "
-"printers for you, but note that on some systems the auto-detection CAN "
-"FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do it ON "
-"YOUR OWN RISK!\n"
-"\n"
-"Do you really want to get your printers auto-detected?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:227 ../../printerdrake.pm_.c:229
-#: ../../printerdrake.pm_.c:230
-#, fuzzy
-msgid "Do auto-detection"
-msgstr "Koristi auto detekciju"
-
-#: ../../printerdrake.pm_.c:228
-#, fuzzy
-msgid "Set up printer manually"
-msgstr "Ime udaljenog pisača"
-
-#: ../../printerdrake.pm_.c:256
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "detektirano %s"
-
-#: ../../printerdrake.pm_.c:260 ../../printerdrake.pm_.c:287
-#: ../../printerdrake.pm_.c:306
-#, c-format
-msgid "Printer on parallel port \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:262 ../../printerdrake.pm_.c:289
-#: ../../printerdrake.pm_.c:311
-#, c-format
-msgid "USB printer \\/*%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:379
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:383
-#, fuzzy
-msgid "You must enter a device or file name!"
-msgstr "Unesite URI pisača"
-
-#: ../../printerdrake.pm_.c:394
-#, fuzzy
-msgid ""
-"No local printer found!\n"
-"\n"
-msgstr "Lokalni pisač"
-
-#: ../../printerdrake.pm_.c:395
-msgid ""
-"Network printers can only be installed after the installation. Choose "
-"\"Hardware\" and then \"Printer\" in the Mandrake Control Center."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:396
-msgid ""
-"To install network printers, click \"Cancel\", switch to the \"Expert Mode"
-"\", and click \"Add a new printer\" again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:407
-msgid ""
-"The following printer was auto-detected, if it is not the one you want to "
-"configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:408
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:410
-msgid ""
-"The following printer was auto-detected. The configuration of the printer "
-"will work fully automatically. If your printer was not correctly detected or "
-"if you prefer a customized printer configuration, turn on \"Manual "
-"configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:411
-msgid ""
-"Here is a list of all auto-detected printers. Please choose the printer you "
-"want to set up. The configuration of the printer will work fully "
-"automatically. If your printer was not correctly detected or if you prefer a "
-"customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:413
-msgid ""
-"Please choose the port where your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:414
-#, fuzzy
-msgid "Please choose the port where your printer is connected to."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../printerdrake.pm_.c:416
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:421
-#, fuzzy
-msgid "You must choose/enter a printer/device!"
-msgstr "Unesite URI pisača"
-
-#: ../../printerdrake.pm_.c:441
-#, fuzzy
-msgid "Manual configuration"
-msgstr "Postava Interneta"
-
-#: ../../printerdrake.pm_.c:467
-msgid ""
-"Is your printer a multi-function device from HP (OfficeJet, PSC, PhotoSmart, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner)?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:482
-#, fuzzy
-msgid "Installing HPOJ package..."
-msgstr "Instaliram paket %s"
-
-#: ../../printerdrake.pm_.c:487
-msgid "Checking device and configuring HPOJ ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:505
-#, fuzzy
-msgid "Installing SANE package..."
-msgstr "Instaliram paket %s"
-
-#: ../../printerdrake.pm_.c:517
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:534
-#, fuzzy
-msgid "Making printer port available for CUPS ..."
-msgstr "Čitam bazu pisača ..."
-
-#: ../../printerdrake.pm_.c:544 ../../printerdrake.pm_.c:1018
-#: ../../printerdrake.pm_.c:1132
-msgid "Reading printer database ..."
-msgstr "Čitam bazu pisača ..."
-
-#: ../../printerdrake.pm_.c:624
-msgid "Remote lpd Printer Options"
-msgstr "Postavke udaljenog lpd pisača"
-
-#: ../../printerdrake.pm_.c:625
-#, fuzzy
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Ukoliko želite koristiti udaljeni lpd red morate unijeti\n"
-"ime ispisnog poslužitelja te ime reda na poslužitelju\n"
-"na koji želite ispisivati."
-
-#: ../../printerdrake.pm_.c:626
-msgid "Remote host name"
-msgstr "Udaljeno ime računala"
-
-#: ../../printerdrake.pm_.c:627
-msgid "Remote printer name"
-msgstr "Ime udaljenog pisača"
-
-#: ../../printerdrake.pm_.c:630
-msgid "Remote host name missing!"
-msgstr "Nedostaje ime računala udaljenog pisača!"
-
-#: ../../printerdrake.pm_.c:634
-msgid "Remote printer name missing!"
-msgstr "Nedostaje ime udaljenog pisača!"
-
-#: ../../printerdrake.pm_.c:702
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Postavke SMB (Windows 9x/NT) pisača"
-
-#: ../../printerdrake.pm_.c:703
-#, fuzzy
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Za ispis na SMB pisač, trebate navesti\n"
-"ime SMB domaćina (Primjetite da može biti različit od TCP/IP imena "
-"računala)\n"
-"i vjerojatno IP adresu poslužitelja pisača, kao i\n"
-"ime dijeljenog resursa za pisač kojem želite pristupiti i bilo koje\n"
-"primjenjivo korisničko ime, lozinku ili informacije o radnoj grupi."
-
-#: ../../printerdrake.pm_.c:704
-msgid "SMB server host"
-msgstr "SMB poslužitelj"
-
-#: ../../printerdrake.pm_.c:705
-msgid "SMB server IP"
-msgstr "IP SMB poslužitelja"
-
-#: ../../printerdrake.pm_.c:706
-msgid "Share name"
-msgstr "Ime sharea"
-
-#: ../../printerdrake.pm_.c:709
-msgid "Workgroup"
-msgstr "Radna grupa"
-
-#: ../../printerdrake.pm_.c:716
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ime poslužitelja ili IP poslužitelja mora biti naveden!"
-
-#: ../../printerdrake.pm_.c:720
-msgid "Samba share name missing!"
-msgstr "Ime dijeljenog samba resursa nedostaje!"
-
-#: ../../printerdrake.pm_.c:725
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:726
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:736
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:739
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:801
-msgid "NetWare Printer Options"
-msgstr "Postavke NetWare pisača"
-
-#: ../../printerdrake.pm_.c:802
-#, fuzzy
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Za ispis na NetWare pisač, trebate navesti\n"
-"NetWare ime poslužitelja pisača (Primjetite da može biti različit od\n"
-"njegovog TCP/IP imena računala!) kao i ime ispisnog reda za piač koji\n"
-"želite pristupiti kao i primjenjivo korisničko ime i lozinku."
-
-#: ../../printerdrake.pm_.c:803
-msgid "Printer Server"
-msgstr "Ispisni poslužitelj"
-
-#: ../../printerdrake.pm_.c:804
-msgid "Print Queue Name"
-msgstr "Ime reda pisača"
-
-#: ../../printerdrake.pm_.c:809
-msgid "NCP server name missing!"
-msgstr "Ime NCP poslužitelja nedostaje!"
-
-#: ../../printerdrake.pm_.c:813
-msgid "NCP queue name missing!"
-msgstr "Nedostaje ime NCP reda!"
-
-#: ../../printerdrake.pm_.c:852
-#, fuzzy
-msgid "TCP/Socket Printer Options"
-msgstr "Opcije socket pisača"
-
-#: ../../printerdrake.pm_.c:853
-#, fuzzy
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name of "
-"the printer and optionally the port number. On HP JetDirect servers the port "
-"number is usually 9100, on other servers it can vary. See the manual of your "
-"hardware."
-msgstr ""
-"Za ispis na socket pisač, trebate navesti \n"
-"ime poslužitelja od printera te opciono broj porta."
-
-#: ../../printerdrake.pm_.c:854
-msgid "Printer host name"
-msgstr "Ime računala od pisača"
-
-#: ../../printerdrake.pm_.c:858
-msgid "Printer host name missing!"
-msgstr "Nedostaje ime računala od pisača!"
-
-#: ../../printerdrake.pm_.c:887 ../../printerdrake.pm_.c:889
-msgid "Printer Device URI"
-msgstr "URI Uređaja pisača"
-
-#: ../../printerdrake.pm_.c:888
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:903
-msgid "A valid URI must be entered!"
-msgstr "Ispravan URI mora biti unešen!"
-
-#: ../../printerdrake.pm_.c:1004
-#, fuzzy
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svaki pisač treba ime (na primjer lp).\n"
-"Polja opisa i lokacije ne mora biti \n"
-"popunjeno. To su komentari za korisnike."
-
-#: ../../printerdrake.pm_.c:1005
-msgid "Name of printer"
-msgstr "Ime pisača"
-
-#: ../../printerdrake.pm_.c:1006
-msgid "Description"
-msgstr "Opis"
-
-#: ../../printerdrake.pm_.c:1007
-msgid "Location"
-msgstr "Lokacija"
-
-#: ../../printerdrake.pm_.c:1021
-msgid "Preparing printer database ..."
-msgstr "Pripremam bazu pisača ..."
-
-#: ../../printerdrake.pm_.c:1112
-#, fuzzy
-msgid "Your printer model"
-msgstr "Ime udaljenog pisača"
-
-#: ../../printerdrake.pm_.c:1113
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1118 ../../printerdrake.pm_.c:1121
-#, fuzzy
-msgid "The model is correct"
-msgstr "Da li je ovo ispravno?"
-
-#: ../../printerdrake.pm_.c:1119 ../../printerdrake.pm_.c:1120
-#: ../../printerdrake.pm_.c:1123
-#, fuzzy
-msgid "Select model manually"
-msgstr "Ime udaljenog pisača"
-
-#: ../../printerdrake.pm_.c:1139
-msgid "Printer model selection"
-msgstr "Izabir modela pisača"
-
-#: ../../printerdrake.pm_.c:1140
-msgid "Which printer model do you have?"
-msgstr "Kakav model pisača imate?"
-
-#: ../../printerdrake.pm_.c:1141
-#, fuzzy
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Search the correct model in the list when the cursor is "
-"standing on a wrong model or on \"Raw printer\"."
-msgstr ""
-"\n"
-"\n"
-"Molim, provjerite da li je Printerdrake \n"
-"automatski pronašao vaš model pisača\n"
-"ispravno. Pronađite ispravan model u\n"
-"popisu ukoliko pokazivač pokazuje a\n"
-"krivi model ili na \"Raw pisač\"."
-
-#: ../../printerdrake.pm_.c:1144
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1220
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter konfiguracija"
-
-#: ../../printerdrake.pm_.c:1221
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1264 ../../printerdrake.pm_.c:1291
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguracija"
-
-#: ../../printerdrake.pm_.c:1265
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1292
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Go to the US site and click on the \"Drivers\" button. Then choose "
-"your model and afterwards \"Linux\" as operating system. The drivers come as "
-"RPM packages or shell scripts with interactive graphical installation. You "
-"do not need to do this configuration by the graphical frontends. Cancel "
-"directly after the license agreement. Then print printhead alignment pages "
-"with \"lexmarkmaintain\" and adjust the head alignment settings with this "
-"program."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1508
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1517
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
-
-#: ../../printerdrake.pm_.c:1521
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: ../../printerdrake.pm_.c:1526
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s je izvan dosega!<"
-
-#: ../../printerdrake.pm_.c:1565
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li želite postaviti ovaj pisač (\"%s\")\n"
-"kao podrazumijevani pisač?"
-
-#: ../../printerdrake.pm_.c:1582
-msgid "Test pages"
-msgstr "Testne stranice"
-
-#: ../../printerdrake.pm_.c:1583
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1587
-msgid "No test pages"
-msgstr "Bez testnih stranica"
-
-#: ../../printerdrake.pm_.c:1588
-msgid "Print"
-msgstr "Ispiši"
-
-#: ../../printerdrake.pm_.c:1590
-msgid "Standard test page"
-msgstr "Standardna testna stranica"
-
-#: ../../printerdrake.pm_.c:1593
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna stranica (Letter)"
-
-#: ../../printerdrake.pm_.c:1596
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna stranica (A4)"
-
-#: ../../printerdrake.pm_.c:1598
-msgid "Photo test page"
-msgstr "Foto testna stranica"
-
-#: ../../printerdrake.pm_.c:1602
-#, fuzzy
-msgid "Do not print any test page"
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:1610 ../../printerdrake.pm_.c:1747
-msgid "Printing test page(s)..."
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:1635
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna/e stranica/e su poslane na pisač.\n"
-"Može potrajati neko vrijeme dok ispisivanje ne započne.\n"
-"Status ispisa:\n"
-"%s\n"
-"\n"
-
-#: ../../printerdrake.pm_.c:1639
-#, fuzzy
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Probna stranica(e) poslana je na pisač.\n"
-"Ponekad je potrebno par sekundi prije nego pisač počne s ispisom.\n"
-"Da li sve radi kako treba?"
-
-#: ../../printerdrake.pm_.c:1646
-msgid "Did it work properly?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1667 ../../printerdrake.pm_.c:2732
-#, fuzzy
-msgid "Raw printer"
-msgstr "Nema pisača"
-
-#: ../../printerdrake.pm_.c:1685
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1687
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1690 ../../printerdrake.pm_.c:1706
-#: ../../printerdrake.pm_.c:1716
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1693 ../../printerdrake.pm_.c:1732
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1696
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1701 ../../printerdrake.pm_.c:1711
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1703 ../../printerdrake.pm_.c:1713
-#: ../../printerdrake.pm_.c:1723
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1708 ../../printerdrake.pm_.c:1718
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1721
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1725
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1729
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1738 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:1745 ../../printerdrake.pm_.c:1746
-#: ../../printerdrake.pm_.c:2716 ../../standalone/drakbackup_.c:754
-#: ../../standalone/drakbackup_.c:2458 ../../standalone/drakfont_.c:577
-#: ../../standalone/drakfont_.c:791
-msgid "Close"
-msgstr "Zatvori"
-
-#: ../../printerdrake.pm_.c:1741 ../../printerdrake.pm_.c:1753
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Onemogućujem mrežu"
-
-#: ../../printerdrake.pm_.c:1742 ../../printerdrake.pm_.c:1754
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Onemogućujem mrežu"
-
-#: ../../printerdrake.pm_.c:1744
-#, fuzzy
-msgid "Print option list"
-msgstr "Postavke pisača"
-
-#: ../../printerdrake.pm_.c:1766
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify "
-"the scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" and \"man sane-hp\" on the command line "
-"to get more information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1772
-#, c-format
-msgid ""
-"Your HP multi-function device was configured automatically to be able to "
-"scan. Now you can scan from the command line with \"ptal-hp %s scan ...\". "
-"Scanning via a graphical interface or from the GIMP is not supported yet for "
-"your device. More information you will find in the \"/usr/share/doc/hpoj-0.8/"
-"ptal-hp-scan.html\" file on your system. If you have an HP LaserJet 1100 or "
-"1200 you can only scan when you have the scanner option installed.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1794 ../../printerdrake.pm_.c:2221
-#: ../../printerdrake.pm_.c:2485 ../../standalone/printerdrake_.c:49
-#, fuzzy
-msgid "Reading printer data ..."
-msgstr "Čitam CUPS bazu upravljačkih programa..."
-
-#: ../../printerdrake.pm_.c:1814 ../../printerdrake.pm_.c:1842
-#: ../../printerdrake.pm_.c:1877
-#, fuzzy
-msgid "Transfer printer configuration"
-msgstr "Postava Interneta"
-
-#: ../../printerdrake.pm_.c:1815
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1818
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1820
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1822
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1824
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1825
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1826
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1829
-msgid "Do not transfer printers"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1830 ../../printerdrake.pm_.c:1847
-msgid "Transfer"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1843
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1851
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ime pisača može sadržavati samo slova, brojeve i podvlaku"
-
-#: ../../printerdrake.pm_.c:1856
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Pisač \"%s\" već postoji,\n"
-"da li zaista želite prepisati njegovu konfiguraciju?"
-
-#: ../../printerdrake.pm_.c:1864
-msgid "New printer name"
-msgstr "Novo ime pisača"
-
-#: ../../printerdrake.pm_.c:1867
-#, c-format
-msgid "Transferring %s ..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1878
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1887
-#, fuzzy
-msgid "Refreshing printer data ..."
-msgstr "Čitam CUPS bazu upravljačkih programa..."
-
-#: ../../printerdrake.pm_.c:1895 ../../printerdrake.pm_.c:1966
-#: ../../printerdrake.pm_.c:1978
-#, fuzzy
-msgid "Configuration of a remote printer"
-msgstr "Postavke pisača"
-
-#: ../../printerdrake.pm_.c:1896
-#, fuzzy
-msgid "Starting network ..."
-msgstr "Pokrećem vašu vezu..."
-
-#: ../../printerdrake.pm_.c:1930 ../../printerdrake.pm_.c:1934
-#: ../../printerdrake.pm_.c:1936
-#, fuzzy
-msgid "Configure the network now"
-msgstr "Podesi mrežu"
-
-#: ../../printerdrake.pm_.c:1931
-#, fuzzy
-msgid "Network functionality not configured"
-msgstr "Niste podesili monitor"
-
-#: ../../printerdrake.pm_.c:1932
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1935
-#, fuzzy
-msgid "Go on without configuring the network"
-msgstr "Podešavam mrežu"
-
-#: ../../printerdrake.pm_.c:1968
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network gets accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1969
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:1979
-#, fuzzy
-msgid "Restarting printing system ..."
-msgstr "Koji ispisni sustav želite koristiti?"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "high"
-msgstr "Visok"
-
-#: ../../printerdrake.pm_.c:2017
-#, fuzzy
-msgid "paranoid"
-msgstr "Paranoidan"
-
-#: ../../printerdrake.pm_.c:2018
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2019
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2051
-#, fuzzy
-msgid "Starting the printing system at boot time"
-msgstr "Koji ispisni sustav želite koristiti?"
-
-#: ../../printerdrake.pm_.c:2052
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2075 ../../printerdrake.pm_.c:2113
-#: ../../printerdrake.pm_.c:2143 ../../printerdrake.pm_.c:2176
-#: ../../printerdrake.pm_.c:2281
-msgid "Checking installed software..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2117
-msgid "Removing LPRng..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2147
-msgid "Removing LPD..."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2205
-#, fuzzy
-msgid "Select Printer Spooler"
-msgstr "Odaberite vezu pisača"
-
-#: ../../printerdrake.pm_.c:2206
-#, fuzzy
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji ispisni sustav želite koristiti?"
-
-#: ../../printerdrake.pm_.c:2239
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\" ..."
-msgstr "Podesi pisač"
-
-#: ../../printerdrake.pm_.c:2252
-#, fuzzy
-msgid "Installing Foomatic ..."
-msgstr "Instaliram paket %s"
-
-#: ../../printerdrake.pm_.c:2309 ../../printerdrake.pm_.c:2348
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2803
-msgid "Printer options"
-msgstr "Postavke pisača"
-
-#: ../../printerdrake.pm_.c:2318
-#, fuzzy
-msgid "Preparing PrinterDrake ..."
-msgstr "Čitam CUPS bazu upravljačkih programa..."
-
-#: ../../printerdrake.pm_.c:2335 ../../printerdrake.pm_.c:2890
-#, fuzzy
-msgid "Configuring applications..."
-msgstr "Podesi pisač"
-
-#: ../../printerdrake.pm_.c:2355
-#, fuzzy
-msgid "Would you like to configure printing?"
-msgstr "Da li želite podesiti pisač?"
-
-#: ../../printerdrake.pm_.c:2367
-msgid "Printing system: "
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2415
-#, fuzzy
-msgid "Printerdrake"
-msgstr "Pisac"
-
-#: ../../printerdrake.pm_.c:2419
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; to view information about it; "
-"or to make a printer on a remote CUPS server available for Star Office/"
-"OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2420
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2446
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2464
-#, fuzzy
-msgid "Change the printing system"
-msgstr "Podesi mrežu"
-
-#: ../../printerdrake.pm_.c:2469 ../../standalone/draknet_.c:278
-msgid "Normal Mode"
-msgstr "Normalni mod"
-
-#: ../../printerdrake.pm_.c:2625 ../../printerdrake.pm_.c:2675
-#: ../../printerdrake.pm_.c:2884
-#, fuzzy
-msgid "Do you want to configure another printer?"
-msgstr "Da li želite iskušati postavu ?"
-
-#: ../../printerdrake.pm_.c:2711
-#, fuzzy
-msgid "Modify printer configuration"
-msgstr "Postavke modema"
-
-#: ../../printerdrake.pm_.c:2713
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Da li želite iskušati postavu ?"
-
-#: ../../printerdrake.pm_.c:2717
-msgid "Do it!"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2722 ../../printerdrake.pm_.c:2777
-#, fuzzy
-msgid "Printer connection type"
-msgstr "Dijeljenje Internet Veze"
-
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2781
-#, fuzzy
-msgid "Printer name, description, location"
-msgstr "Veza pisača"
-
-#: ../../printerdrake.pm_.c:2725 ../../printerdrake.pm_.c:2796
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2726 ../../printerdrake.pm_.c:2797
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2807
-msgid "Set this printer as the default"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2812
-msgid "Add this printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2821
-msgid "Remove this printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2739 ../../printerdrake.pm_.c:2830
-#, fuzzy
-msgid "Print test pages"
-msgstr "Ispisujem probnu stranicu(e)..."
-
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
-#, fuzzy
-msgid "Know how to use this printer"
-msgstr "Da li želite iskušati postavu ?"
-
-#: ../../printerdrake.pm_.c:2742 ../../printerdrake.pm_.c:2834
-#, fuzzy
-msgid "Remove printer"
-msgstr "Postavke udaljenog pisača"
-
-#: ../../printerdrake.pm_.c:2786
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\" ..."
-msgstr "Čitam CUPS bazu upravljačkih programa..."
-
-#: ../../printerdrake.pm_.c:2810
-msgid "Default printer"
-msgstr "Podrazumijevani pisač"
-
-#: ../../printerdrake.pm_.c:2811
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2815 ../../printerdrake.pm_.c:2818
-msgid "Adding printer to Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2816
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2819
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2824 ../../printerdrake.pm_.c:2827
-msgid "Removing printer from Star Office/OpenOffice.org"
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2825
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2828
-#, c-format
-msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
-msgstr ""
-
-#: ../../printerdrake.pm_.c:2836
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li želite ponovno pokrenuti mrežu?"
-
-#: ../../printerdrake.pm_.c:2838
-#, fuzzy, c-format
-msgid "Removing printer \"%s\" ..."
-msgstr "Čitam CUPS bazu upravljačkih programa..."
-
-#: ../../proxy.pm_.c:29 ../../proxy.pm_.c:37 ../../proxy.pm_.c:58
-#: ../../proxy.pm_.c:78
-msgid "Proxy configuration"
-msgstr "Postava proxy-a"
-
-#: ../../proxy.pm_.c:30
-msgid ""
-"Welcome to the proxy configuration utility.\n"
-"\n"
-"Here, you'll be able to set up your http and ftp proxies\n"
-"with or without login and password\n"
-msgstr ""
-"Dobro došli u pomoćni program za konfiguriranje proxy-a.\n"
-"\n"
-"Ovdje ćete moći postaviti vaš http i ftp proxi-e\n"
-"sa ili bez logina i lozinke\n"
-
-#: ../../proxy.pm_.c:38
-msgid ""
-"Please fill in the http proxy informations\n"
-"Leave it blank if you don't want an http proxy"
-msgstr ""
-"Molimo popunite http proxy informacije\n"
-"Molimo ostavite prazno ukoliko ne želite http proxy"
-
-#: ../../proxy.pm_.c:39 ../../proxy.pm_.c:60
-msgid "URL"
-msgstr "URL"
-
-#: ../../proxy.pm_.c:40 ../../proxy.pm_.c:61
-msgid "port"
-msgstr "port"
-
-#: ../../proxy.pm_.c:44
-msgid "Url should begin with 'http:'"
-msgstr "Url treba početi sa 'http:'"
-
-#: ../../proxy.pm_.c:48 ../../proxy.pm_.c:69
-msgid "The port part should be numeric"
-msgstr "Broj porta bi trebao biti numerički"
-
-#: ../../proxy.pm_.c:59
-msgid ""
-"Please fill in the ftp proxy informations\n"
-"Leave it blank if you don't want an ftp proxy"
-msgstr ""
-"Molimo unesite ftp proxy informacije\n"
-"Ostavite prazno ukoliko ne želite ftp proxy"
-
-#: ../../proxy.pm_.c:65
-msgid "Url should begin with 'ftp:'"
-msgstr "Url treba početi sa 'ftp:'"
-
-#: ../../proxy.pm_.c:79
-msgid ""
-"Please enter proxy login and password, if any.\n"
-"Leave it blank if you don't want login/passwd"
-msgstr ""
-"Molimo unesite proxy login i lozinku ukoliko postoje.\n"
-"Ostavite prazno ako ne želite login/lozinku"
-
-#: ../../proxy.pm_.c:80
-msgid "login"
-msgstr "login"
-
-#: ../../proxy.pm_.c:82
-msgid "password"
-msgstr "lozinka"
-
-#: ../../proxy.pm_.c:84
-msgid "re-type password"
-msgstr "ponovno unesite lozinku"
-
-#: ../../proxy.pm_.c:88
-msgid "The passwords don't match. Try again!"
-msgstr "Lozinke se ne podudaraju. Pokušajte ponovno!"
-
-#: ../../raid.pm_.c:35
-#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Ne mogu dodati particiju na _formatirani_ RAID md%d"
-
-#: ../../raid.pm_.c:111
-#, c-format
-msgid "Can't write file %s"
-msgstr "Ne mogu pisati u datoteku %s"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed"
-msgstr "mkraid nije uspio"
-
-#: ../../raid.pm_.c:136
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid nije uspio (možda niste instalirali raidtools alate?)"
-
-#: ../../raid.pm_.c:152
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: ../../services.pm_.c:14
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreni ALSA (Naprednu Linux Zvučnu Arhitekturu) zvučni sustav"
-
-#: ../../services.pm_.c:15
-msgid "Anacron a periodic command scheduler."
-msgstr "Anacron periodno zakazivanje komandi"
-
-#: ../../services.pm_.c:16
-msgid ""
-"apmd is used for monitoring batery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd služi za monitoriranje statusa i baterije i njegovo logiranje putem "
-"syslog-a.\n"
-"Također može biti korišten za gašenje računala kada je baterija slaba."
-
-#: ../../services.pm_.c:18
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Pokreće komande zakazane sa at komandom u specifirano vrijeme kada\n"
-"je at pokrenut, i pokreće batch komande kada je prosječna zauzetost dovoljno "
-"niska."
-
-#: ../../services.pm_.c:20
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardan UNIX program koji pokreće korisnički definirane programe\n"
-"u periodično zakazana vremena. vixie cron dodaje veliki broj korisnih "
-"funkcija običnom UNIX cron-u, uključujući bolju sigurnost i veću snagu "
-"konfiguracijskih opcija."
-
-#: ../../services.pm_.c:23
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podršku za mišu tekst baziranim Linux aplikacijama kao što je\n"
-"Midnight Commander. Također pruža miš baziranim konzolama odreži-i-zalijepi "
-"operacije,\n"
-"i uključuje podršku za iskočive menije u konzoli."
-
-#: ../../services.pm_.c:26
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake pokreće isprobavanje hardware-a, i opciono konfigurira\n"
-"novi/promjenjeni hardware."
-
-#: ../../services.pm_.c:28 ../../standalone/logdrake_.c:412
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web poslužitelj. Koristi se za posluživanje HTML\n"
-"dokumenata i CGI skripti."
-
-#: ../../services.pm_.c:29
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver demon (najčešće zvan inetd) pokreće \n"
-"razne druge internet servise po potrebi. Odgovoran je za pokretanje \n"
-"mnogo servisa, uključujući telnet, ftp, rsh, i rlogin. Isključivanje inetd-"
-"a\n"
-"onemogučuje sve servise za koje je zadužen."
-
-#: ../../services.pm_.c:33
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokreće paketno filtriranje za Linux kernel 2.2 serije, za postavljanje\n"
-"vatrozida za zaštitu vašeg računala od mrežnih napada."
-
-#: ../../services.pm_.c:35
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket učitava odabranu tastaturnu mapu kao što je postavljenu u\n"
-"/etc/sysconfig/keyboard. Ona se može odabrati koristeći kbdconfig alat.\n"
-"Trebali biste ostaviti ovo uključeno za većinu računala."
-
-#: ../../services.pm_.c:38
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatsko regeneriranje kernel header-a u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: ../../services.pm_.c:40
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatska detekcija i konfiguracija hardware-a pri podizanju."
-
-#: ../../services.pm_.c:41
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf će ponekada urediti izvršavanje raznih radnji\n"
-"pri samom podizanju kako bi održao sustavsku konfiguraciju."
-
-#: ../../services.pm_.c:43
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je daemon za ispis koji je potreban od lpr-a kako bi radio ispravno.\n"
-"On je pojednostavljeno poslužitelj koji šalje ispisne poslove pisaču(ima)."
-
-#: ../../services.pm_.c:45
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtualni Poslužitelj, koristi se za pravljenje visoko raspoloživog\n"
-"poslužitelja visokih performansi."
-
-#: ../../services.pm_.c:47 ../../standalone/logdrake_.c:413
-#, fuzzy
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) poslužitelj koji se upotrebljava\n"
-"za razlučivanje imena računala u IP adrese."
-
-#: ../../services.pm_.c:48
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i Demontira sve Mrežne datotečne sustave (NFS), SMB (Lan\n"
-"Manager/Windows), i NCP (NetWare) točke montiranja."
-
-#: ../../services.pm_.c:50
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/Deaktivira sva podešena mrežna sučelja prilikom pokretanja\n"
-"sustava."
-
-#: ../../services.pm_.c:52
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mreža.\n"
-"Ovaj servis pruža NFS poslužiteljsku funkcionalnost, koji se konfigurira\n"
-"putem /etc/exports datoteke."
-
-#: ../../services.pm_.c:55
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka putem TCP/IP mreža.\n"
-"Ovaj servis pruža funkcionalnost NFS datotečnog zaključavanja."
-
-#: ../../services.pm_.c:57
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Automatski uključuje numlock tipku u konzoli i\n"
-"XFree-u pri podizanju."
-
-#: ../../services.pm_.c:59
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podržava OKI 4w i kompaktibilne win pisače."
-
-#: ../../services.pm_.c:60
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"PCMCIA podrška je obično za podržavanje stvari poput ethernet i\n"
-"modema u laptopima. Ona neće biti pokrenuta ukoliko nije tako\n"
-" konfigurirana zato je sigurno pokrenuti ju iako na instaliranom\n"
-" računalu ne treba."
-
-#: ../../services.pm_.c:63
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper uređuje RPC vezama, koje su korištene u protokolima\n"
-"poput NFS-a ili NIS-a. Portmap poslužitelj mora biti pokrenut na računalima\n"
-"koji su poslužitelji za protokole koji se služe RPC mehanizmima."
-
-#: ../../services.pm_.c:66 ../../standalone/logdrake_.c:415
-#, fuzzy
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, koji je program koji\n"
-"šalje mail-ove sa jedne mašine na drugu."
-
-#: ../../services.pm_.c:67
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Sprema i vraća sustavsku entropiju za veću kvalitetu generiranja\n"
-"slučajnih brojeva."
-
-#: ../../services.pm_.c:69
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
-msgstr ""
-"Dodjeljuje raw uređaje (kao što su hard disk\n"
-"particije), za uporabu u aplikacijama kao što su Oracle"
-
-#: ../../services.pm_.c:71
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed daemon omogućava automatsku IP ruter tablicu koja se obnavlja\n"
-"putem RIP protokola. Dok se RIP najšire koristi na malim mrežama, više "
-"kompleksniji\n"
-"ruting protokoli su potrebni za kompleksnije mreže."
-
-#: ../../services.pm_.c:74
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol omogućava korisnicima na mreži da dohvate\n"
-"mjerljive performanse za svako računalo koje je na mreži."
-
-#: ../../services.pm_.c:76
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokol omogućava korisnicima na mreži da identificira tko je\n"
-"prijavljen na drugim računalima koja odgovaraju."
-
-#: ../../services.pm_.c:78
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
-msgstr ""
-"Rwho protokol omogućava udaljenim korisnicima da dobiju popis svih\n"
-"korisnika prijavljenih na računalo na kojima je pokrenut rwho (slično finger-"
-"u)."
-
-#: ../../services.pm_.c:80
-msgid "Launch the sound system on your machine"
-msgstr "Pokreni zvučni sustav na vašem računalu"
-
-#: ../../services.pm_.c:81
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
-msgstr ""
-"Syslog je resurs kojega koriste mnogi demoni kako bi logirali poruke\n"
-"u različite sustavske log datoteke. Dobra je ideja uvijek imati pokrenuti "
-"syslog."
-
-#: ../../services.pm_.c:83
-msgid "Load the drivers for your usb devices."
-msgstr "Učitava upravljačke programe za vaše usb uređaje."
-
-#: ../../services.pm_.c:84
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Pokreće X Pismovni Poslužitelj (ovo je nužno za XFree da se pokrene)."
-
-#: ../../services.pm_.c:110 ../../services.pm_.c:152
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi trebaju biti startani automatski kod boot-a"
-
-#: ../../services.pm_.c:122
-msgid "Printing"
-msgstr "Ispisujem"
-
-#: ../../services.pm_.c:123
-msgid "Internet"
-msgstr "Internet"
-
-#: ../../services.pm_.c:126
-msgid "File sharing"
-msgstr ""
-
-#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:934
-#, fuzzy
-msgid "System"
-msgstr "Sistemski mod"
-
-#: ../../services.pm_.c:133
-#, fuzzy
-msgid "Remote Administration"
-msgstr "Postavke udaljenog lpd pisača"
-
-# ../../share/compssUsers
-#: ../../services.pm_.c:141
-#, fuzzy
-msgid "Database Server"
-msgstr "Baze"
-
-#: ../../services.pm_.c:170
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: ../../services.pm_.c:186
-#, fuzzy
-msgid "Services"
-msgstr "uređaj"
-
-#: ../../services.pm_.c:198
-msgid "running"
-msgstr "pokrećem"
-
-#: ../../services.pm_.c:198
-msgid "stopped"
-msgstr "zaustavljen"
-
-#: ../../services.pm_.c:212
-msgid "Services and deamons"
-msgstr "Servisi i daemoni"
-
-#: ../../services.pm_.c:217
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, žalim."
-
-#: ../../services.pm_.c:224
-msgid "On boot"
-msgstr "Pri pokretanju"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Start"
-msgstr "Status:"
-
-#: ../../services.pm_.c:236
-#, fuzzy
-msgid "Stop"
-msgstr "Sektor"
-
-#: ../../share/advertising/00-thanks.pl_.c:9
-msgid "Thank you for choosing Mandrake Linux 8.2"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:10
-msgid "Welcome to the Open Source world"
-msgstr ""
-
-#: ../../share/advertising/00-thanks.pl_.c:11
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work on the part of "
-"the worldwide Linux Community"
-msgstr ""
-
-#: ../../share/advertising/01-gnu.pl_.c:9
-#, fuzzy
-msgid "Join the Free Software world"
-msgstr "Protokol za ostatak svijeta"
-
-#: ../../share/advertising/01-gnu.pl_.c:10
-msgid ""
-"Get to know the Open Source community and become a member. Learn, teach, and "
-"help others by joining the many discussion forums that you will find in our "
-"\"Community\" webpages"
-msgstr ""
-
-#: ../../share/advertising/02-internet.pl_.c:9
-#, fuzzy
-msgid "Internet and Messaging"
-msgstr "Internet pristup"
-
-#: ../../share/advertising/02-internet.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best software to access everything the "
-"Internet has to offer: Surf the web & view animations with Mozilla and "
-"Konqueror, exchange email & organize your personal information with "
-"Evolution and Kmail, and much more"
-msgstr ""
-
-#: ../../share/advertising/03-graphic.pl_.c:9
-#, fuzzy
-msgid "Multimedia and Graphics"
-msgstr "Multimedija - Grafika"
-
-#: ../../share/advertising/03-graphic.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use "
-"the latest software to play music and audio files, edit and organize your "
-"images and photos, watch TV and videos, and much more"
-msgstr ""
-
-#: ../../share/advertising/04-develop.pl_.c:9
-msgid "Development"
-msgstr "Razvoj"
-
-#: ../../share/advertising/04-develop.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 is the ultimate development platform. Discover the power "
-"of the GNU gcc compiler as well as the best Open Source development "
-"environments"
-msgstr ""
-
-#: ../../share/advertising/05-contcenter.pl_.c:9
-#, fuzzy
-msgid "Mandrake Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../share/advertising/05-contcenter.pl_.c:10
-msgid ""
-"The Mandrake Linux 8.2 Control Center is a one-stop location for fully "
-"customizing and configuring your Mandrake system"
-msgstr ""
-
-#: ../../share/advertising/06-user.pl_.c:9
-#, fuzzy
-msgid "User interfaces"
-msgstr "Mrežni međusklop"
-
-#: ../../share/advertising/06-user.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides 11 different graphical desktop environments and "
-"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker "
-"0.8, and the rest"
-msgstr ""
-
-#: ../../share/advertising/07-server.pl_.c:9
-#, fuzzy
-msgid "Server Software"
-msgstr "SMB poslužitelj"
-
-#: ../../share/advertising/07-server.pl_.c:10
-msgid ""
-"Transform your machine into a powerful server with just a few clicks of the "
-"mouse: Web server, email, firewall, router, file and print server, ..."
-msgstr ""
-
-#: ../../share/advertising/08-games.pl_.c:9
-msgid "Games"
-msgstr "Igre"
-
-#: ../../share/advertising/08-games.pl_.c:10
-msgid ""
-"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, "
-"cards, sports, strategy, ..."
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:9
-msgid "MandrakeCampus"
-msgstr ""
-
-#: ../../share/advertising/09-MDKcampus.pl_.c:10
-msgid ""
-"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft "
-"provides free Linux training, as well as a way to test your progress, at "
-"MandrakeCampus -- our online training center"
-msgstr ""
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:9
-#, fuzzy
-msgid "MandrakeExpert"
-msgstr "Ekspert"
-
-#: ../../share/advertising/10-MDKexpert.pl_.c:10
-msgid ""
-"Quality support from the Linux Community, and from MandrakeSoft, is just "
-"around the corner. And if you're already a Linux veteran, become an \"Expert"
-"\" and share your knowledge at our support website"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:9
-msgid "MandrakeConsulting"
-msgstr ""
-
-#: ../../share/advertising/11-consul.pl_.c:10
-msgid ""
-"For all of your IT projects, our consultants are ready to analyze your "
-"requirements and offer a customized solution. Benefit from MandrakeSoft's "
-"vast experience as a Linux producer to provide a true IT alternative for "
-"your business organization"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:9
-msgid "MandrakeStore"
-msgstr ""
-
-#: ../../share/advertising/12-MDKstore.pl_.c:10
-msgid ""
-"A full range of Linux solutions, as well as special offers on products and "
-"'goodies', are available online at our e-store"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:9
-msgid ""
-"For more information on MandrakeSoft's Professional Services and commercial "
-"offerings, please see the following web page:"
-msgstr ""
-
-#: ../../share/advertising/13-Nvert.pl_.c:11
-msgid "http://www.mandrakesoft.com/sales/contact"
-msgstr ""
-
-#: ../../standalone.pm_.c:25
-#, fuzzy
-msgid "Installing packages..."
-msgstr "Instaliram paket %s"
-
-#: ../../standalone/diskdrake_.c:85
-msgid ""
-"I can't read your partition table, it's too corrupted for me :(\n"
-"I'll try to go on blanking bad partitions"
-msgstr ""
-"Ne mogu pročitati vašu particijsku tablicu, previše je uništena za mene :(\n"
-"Pokušati ću sa brisanjem loših particija"
-
-#: ../../standalone/drakautoinst_.c:45
-#, fuzzy
-msgid "Error!"
-msgstr "Greška"
-
-#: ../../standalone/drakautoinst_.c:46
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:48
-#, fuzzy
-msgid "Auto Install Configurator"
-msgstr "Postava nakon instalacije"
-
-#: ../../standalone/drakautoinst_.c:49
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:71
-#, fuzzy
-msgid "Automatic Steps Configuration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../standalone/drakautoinst_.c:72
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:145
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:243 ../../standalone/drakgw_.c:671
-#: ../../standalone/scannerdrake_.c:106
-msgid "Congratulations!"
-msgstr "Čestitke!"
-
-#: ../../standalone/drakautoinst_.c:244
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: ../../standalone/drakautoinst_.c:282
-#, fuzzy
-msgid "Auto Install"
-msgstr "Instaliraj"
-
-#: ../../standalone/drakautoinst_.c:352
-#, fuzzy
-msgid "Add an item"
-msgstr "Dodaj korisnika"
-
-#: ../../standalone/drakautoinst_.c:359
-#, fuzzy
-msgid "Remove the last item"
-msgstr "Formatiram loopback datoteku %s"
-
-#: ../../standalone/drakbackup_.c:448 ../../standalone/drakbackup_.c:451
-#: ../../standalone/drakbackup_.c:455
-msgid ""
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:449
-msgid ""
-"\n"
-" DrakBackup Report \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:450
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:453
-msgid ""
-"\n"
-"\n"
-"***********************************************************************\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:454
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:476
-msgid "total progess"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:555 ../../standalone/drakbackup_.c:602
-msgid "Backup system files..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:603 ../../standalone/drakbackup_.c:667
-#, fuzzy
-msgid "Hard Disk Backup files..."
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:615
-#, fuzzy
-msgid "Backup User files..."
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:616
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:666
-#, fuzzy
-msgid "Backup Other files..."
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:674
-#, c-format
-msgid ""
-"file list send by FTP : %s\n"
-" "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:677
-msgid ""
-"\n"
-"(!) FTP connexion problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:687
-msgid "(!) Error during mail sending. \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:728 ../../standalone/drakbackup_.c:739
-#: ../../standalone/drakbackup_.c:750 ../../standalone/drakfont_.c:787
-#, fuzzy
-msgid "File Selection"
-msgstr "Odabir paketa"
-
-#: ../../standalone/drakbackup_.c:755
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:790
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:791
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:792
-msgid "Backup your System files. ( /etc directory )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:793
-msgid "Use incremental backup (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:794
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:795
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:812
-#, fuzzy
-msgid "Please check all users that you want to include in your backup."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:839
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:840 ../../standalone/drakbackup_.c:864
-msgid "Use Incremental Backups (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:862 ../../standalone/drakfont_.c:827
-#, fuzzy
-msgid "Remove Selected"
-msgstr "Ukloni zapis"
-
-#: ../../standalone/drakbackup_.c:900
-#, fuzzy
-msgid "Windows (FAT32)"
-msgstr "Ukloni Windowse(TM)"
-
-#: ../../standalone/drakbackup_.c:939
-#, fuzzy
-msgid "Users"
-msgstr "Korisničko ime"
-
-#: ../../standalone/drakbackup_.c:964
-msgid "Use FTP connection to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:967
-#, fuzzy
-msgid "Please enter the host name or IP."
-msgstr "Molimo istestirajte miša."
-
-#: ../../standalone/drakbackup_.c:972
-msgid ""
-"Please enter the directory to\n"
-" put the backup on this host."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:977
-#, fuzzy
-msgid "Please enter your login"
-msgstr "Molim pokušajte ponovo"
-
-#: ../../standalone/drakbackup_.c:982
-#, fuzzy
-msgid "Please enter your password"
-msgstr "Molim pokušajte ponovo"
-
-#: ../../standalone/drakbackup_.c:988
-#, fuzzy
-msgid "Remember this password"
-msgstr "ponovno unesite lozinku"
-
-#: ../../standalone/drakbackup_.c:1052 ../../standalone/drakbackup_.c:2048
-#, fuzzy
-msgid "FTP Connection"
-msgstr "LAN veza"
-
-#: ../../standalone/drakbackup_.c:1059 ../../standalone/drakbackup_.c:2056
-#, fuzzy
-msgid "Secure Connection"
-msgstr "Odaberite vezu pisača"
-
-#: ../../standalone/drakbackup_.c:1085 ../../standalone/drakbackup_.c:2889
-msgid "Use CD/DVDROM to backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1088 ../../standalone/drakbackup_.c:2893
-#, fuzzy
-msgid "Please choose your CD space"
-msgstr "Molim izaberite raspored tipkovnice."
-
-#: ../../standalone/drakbackup_.c:1094 ../../standalone/drakbackup_.c:2905
-#, fuzzy
-msgid "Please check if you are using CDRW media"
-msgstr "Molim kliknite na particiju"
-
-#: ../../standalone/drakbackup_.c:1100 ../../standalone/drakbackup_.c:2911
-msgid "Please check if you want to erase your CDRW before"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1106
-#, fuzzy
-msgid ""
-"Please check if you want to include\n"
-" install boot on your CD."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1112
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1153
-#, fuzzy
-msgid "Use tape to backup"
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:1156
-msgid "Please enter the device name to use for backup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1162 ../../standalone/drakbackup_.c:1203
-#: ../../standalone/drakbackup_.c:2013
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1195 ../../standalone/drakbackup_.c:2005
-#, fuzzy
-msgid "Please enter the directory to save:"
-msgstr "Molimo istestirajte miša."
-
-#: ../../standalone/drakbackup_.c:1209 ../../standalone/drakbackup_.c:2019
-#, fuzzy
-msgid "Use quota for backup files."
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:1267
-#, fuzzy
-msgid "Network"
-msgstr "Mrežni međusklop"
-
-#: ../../standalone/drakbackup_.c:1272
-msgid "CDROM / DVDROM"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1277
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1297 ../../standalone/drakbackup_.c:1301
-#: ../../standalone/drakbackup_.c:1305
-msgid "hourly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1298 ../../standalone/drakbackup_.c:1302
-#: ../../standalone/drakbackup_.c:1305
-msgid "daily"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1299 ../../standalone/drakbackup_.c:1303
-#: ../../standalone/drakbackup_.c:1305
-msgid "weekly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1300 ../../standalone/drakbackup_.c:1304
-#: ../../standalone/drakbackup_.c:1305
-msgid "monthly"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1312
-#, fuzzy
-msgid "Use daemon"
-msgstr "Korisničko ime"
-
-#: ../../standalone/drakbackup_.c:1317
-#, fuzzy
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1323
-#, fuzzy
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Molim izaberite jezik koji želite koristiti."
-
-#: ../../standalone/drakbackup_.c:1327
-#, fuzzy
-msgid "Use Hard Drive with daemon"
-msgstr "Otkrivanje hard diskova"
-
-#: ../../standalone/drakbackup_.c:1329
-#, fuzzy
-msgid "Use FTP with daemon"
-msgstr "Korisničko ime"
-
-#: ../../standalone/drakbackup_.c:1333
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1369
-msgid "Send mail report after each backup to :"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1411
-msgid "What"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1416
-#, fuzzy
-msgid "Where"
-msgstr "Kotačić"
-
-#: ../../standalone/drakbackup_.c:1421
-#, fuzzy
-msgid "When"
-msgstr "Kotačić"
-
-#: ../../standalone/drakbackup_.c:1426
-#, fuzzy
-msgid "More Options"
-msgstr "Postavke modula:"
-
-#: ../../standalone/drakbackup_.c:1445 ../../standalone/drakbackup_.c:2801
-#, fuzzy
-msgid "Drakbackup Configuration"
-msgstr "Mrežne postavke"
-
-#: ../../standalone/drakbackup_.c:1463
-#, fuzzy
-msgid "Please choose where you want to backup"
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1465
-msgid "on Hard Drive"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1476
-msgid "across Network"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1540
-#, fuzzy
-msgid "Please choose what you want to backup"
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:1541
-#, fuzzy
-msgid "Backup system"
-msgstr "Podesi datotečne sustave"
-
-#: ../../standalone/drakbackup_.c:1542
-msgid "Backup Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1545
-msgid "Select user manually"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1627
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1628
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1630
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1632
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1634
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1635
-#, c-format
-msgid ""
-"\n"
-"- Save on FTP on host : %s\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1636
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1637
-#, fuzzy
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcije"
-
-#: ../../standalone/drakbackup_.c:1638
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1639
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1640
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1641
-#, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include :\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1642
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1643
-msgid "\t-CDROM.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1644
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1645
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1647
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1652
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1753
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1755
-#, fuzzy
-msgid "Please uncheck or remove it on next time."
-msgstr "Izaberite serijski port na kojemu se nalazi modem."
-
-#: ../../standalone/drakbackup_.c:1765
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1786
-msgid " All your selectionned data have been "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1787
-#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1886
-#, fuzzy
-msgid " Restore Configuration "
-msgstr "Mrežne postavke"
-
-#: ../../standalone/drakbackup_.c:1904
-msgid "OK to restore the other files."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1922
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:1972
-#, fuzzy
-msgid "Backup the system files before:"
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:1974
-#, fuzzy
-msgid "please choose the date to restore"
-msgstr "Molim izaberite koju vrstu miša koristite."
-
-#: ../../standalone/drakbackup_.c:2002
-#, fuzzy
-msgid "Use Hard Disk to backup"
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2083
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2085
-msgid "Please enter the directory where backups are stored"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2143
-#, fuzzy
-msgid "Select another media to restore from"
-msgstr "Molim izaberite koju vrstu miša koristite."
-
-#: ../../standalone/drakbackup_.c:2145
-#, fuzzy
-msgid "Other Media"
-msgstr "Ostali"
-
-#: ../../standalone/drakbackup_.c:2151
-#, fuzzy
-msgid "Restore system"
-msgstr "Instaliraj sustav"
-
-#: ../../standalone/drakbackup_.c:2152
-msgid "Restore Users"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2153
-msgid "Restore Other"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2155
-msgid "select path to restore (instead of / )"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2159
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2160
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2217
-msgid "Restore all backups"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2225
-#, fuzzy
-msgid "Custom Restore"
-msgstr "Prilagođeno"
-
-#: ../../standalone/drakbackup_.c:2266 ../../standalone/drakbackup_.c:2291
-#: ../../standalone/drakbackup_.c:2312 ../../standalone/drakbackup_.c:2333
-#: ../../standalone/drakbackup_.c:2351 ../../standalone/drakbackup_.c:2383
-#: ../../standalone/drakbackup_.c:2399 ../../standalone/drakbackup_.c:2419
-#: ../../standalone/drakbackup_.c:2438 ../../standalone/drakbackup_.c:2460
-#: ../../standalone/drakfont_.c:575
-msgid "Help"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2269 ../../standalone/drakbackup_.c:2296
-#: ../../standalone/drakbackup_.c:2315 ../../standalone/drakbackup_.c:2336
-#: ../../standalone/drakbackup_.c:2354 ../../standalone/drakbackup_.c:2402
-#: ../../standalone/drakbackup_.c:2422 ../../standalone/drakbackup_.c:2441
-#, fuzzy
-msgid "Previous"
-msgstr "<- Prijašnje"
-
-#: ../../standalone/drakbackup_.c:2271 ../../standalone/drakbackup_.c:2338
-#: ../../standalone/logdrake_.c:224
-#, fuzzy
-msgid "Save"
-msgstr "Status:"
-
-#: ../../standalone/drakbackup_.c:2317
-#, fuzzy
-msgid "Build Backup"
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2356 ../../standalone/drakbackup_.c:3033
-#, fuzzy
-msgid "Restore"
-msgstr "Prilagođeno"
-
-#: ../../standalone/drakbackup_.c:2404 ../../standalone/drakbackup_.c:2424
-#: ../../standalone/drakbackup_.c:2445
-#, fuzzy
-msgid "Next"
-msgstr "Slijedeće ->"
-
-#: ../../standalone/drakbackup_.c:2478
-msgid ""
-"Please Build backup before to restore it...\n"
-" or verify that your path to save is correct."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2499
-msgid ""
-"Error durind sendmail\n"
-" your report mail was not sent\n"
-" Please configure sendmail"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2522
-#, fuzzy
-msgid "Package List to Install"
-msgstr "Izabir instaliranih paketa"
-
-#: ../../standalone/drakbackup_.c:2550
-msgid ""
-"Error durind sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2573
-#, fuzzy
-msgid "Please select data to restore..."
-msgstr "Molim izaberite jezik koji želite koristiti."
-
-#: ../../standalone/drakbackup_.c:2594
-#, fuzzy
-msgid "Please select media for backup..."
-msgstr "Molim izaberite jezik koji želite koristiti."
-
-#: ../../standalone/drakbackup_.c:2616
-#, fuzzy
-msgid "Please select data to backup..."
-msgstr "Molim izaberite jezik koji želite koristiti."
-
-#: ../../standalone/drakbackup_.c:2638
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2659
-msgid "Under Devel ... please wait."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2739
-#, fuzzy
-msgid "Backup system files"
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2741
-#, fuzzy
-msgid "Backup user files"
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2743
-#, fuzzy
-msgid "Backup other files"
-msgstr "Loša backup datoteka"
-
-#: ../../standalone/drakbackup_.c:2745 ../../standalone/drakbackup_.c:2776
-msgid "Total Progress"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2767
-msgid "files sending by FTP"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2771
-#, fuzzy
-msgid "Sending files..."
-msgstr "Otkrivanje uređaja..."
-
-#: ../../standalone/drakbackup_.c:2841
-msgid "Data list to include on CDROM."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2899
-#, fuzzy
-msgid "Please enter the cd writer speed"
-msgstr "Molimo istestirajte miša."
-
-#: ../../standalone/drakbackup_.c:2917
-msgid "Please enter your CD Writer device name (ex: 0,1,0)"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:2923
-#, fuzzy
-msgid "Please check if you want to include install boot on your CD."
-msgstr "Odaberite pakete za instalaciju."
-
-#: ../../standalone/drakbackup_.c:2989
-#, fuzzy
-msgid "Backup Now from configuration file"
-msgstr "Mrežne postavke"
-
-#: ../../standalone/drakbackup_.c:2999
-#, fuzzy
-msgid "View Backup Configuration."
-msgstr "Mrežne postavke"
-
-#: ../../standalone/drakbackup_.c:3020
-#, fuzzy
-msgid "Wizard Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/drakbackup_.c:3024
-#, fuzzy
-msgid "Advanced Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/drakbackup_.c:3028
-#, fuzzy
-msgid "Backup Now"
-msgstr "Podesi datotečne sustave"
-
-#: ../../standalone/drakbackup_.c:3053
-msgid "Drakbackup"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3104
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-" \n"
-" If you check bzip2 compression, you will compress\n"
-" your data better than gzip (about 2-10 %).\n"
-" This option is not checked by default because\n"
-" this compression mode needs more time ( about 1000% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-" This option will update your backup, but this\n"
-" option is not really useful because you need to\n"
-" decompress your backup before you can update it.\n"
-" \n"
-" - the .backupignore mode:\n"
-"\n"
-" Like with cvs, Drakbackup will ignore all references\n"
-" included in .backupignore files in each directories.\n"
-" ex: \n"
-" /*> cat .backupignore*/\n"
-" *.o\n"
-" *~\n"
-" ...\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3134
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3142
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-" \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3181
-msgid ""
-"restore description:\n"
-" \n"
-"Only the most recent date will be used ,because with incremental \n"
-"backups it is necesarry to restore one by one each older backups.\n"
-"\n"
-"So if you don't like to restore an user please unselect all his\n"
-"check box.\n"
-"\n"
-"Otherwise, you are able to select only one of this\n"
-"\n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerfull \n"
-"\toption to use backup, this option allow you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed after.\n"
-"\tSo you will be able during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this options all\n"
-"\told backups are deleted before each backup. \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3207 ../../standalone/drakbackup_.c:3282
-msgid ""
-" Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita.fr>"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3209 ../../standalone/drakbackup_.c:3284
-msgid ""
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3223
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, DrakBackup will remove \n"
-" your original directory and verify that all \n"
-" backup files are not corrupted. It is recommended \n"
-" you do a last backup before restoring.\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3261
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3270
-msgid ""
-"\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup_.c:3298
-msgid ""
-"Description:\n"
-"\n"
-" Drakbackup is used to backup your system.\n"
-" During the configuration you can select \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ... and Other (like Windows Partitions)\n"
-"\n"
-" Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
-"\n"
-" Drakbackup allows you to restore your system to\n"
-" a user selected directory.\n"
-"\n"
-" Per default all backup will be stored on your\n"
-" /var/lib/drakbackup directory\n"
-"\n"
-" Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbakup.conf\n"
-"\n"
-"Restore Step:\n"
-" \n"
-" During the restore step, Drakbackup will remove\n"
-" your original directory and verify that all\n"
-" backup files are not corrupted. It is recommended\n"
-" you do a last backup before restoring.\n"
-" \n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakboot_.c:58
-#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Instalacija %s-a nije uspjela. Prijavljena je slijedeća grešska:"
-
-#: ../../standalone/drakfont_.c:229
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:231
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:252
-msgid "parse all fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:253
-#, fuzzy
-msgid "no fonts found"
-msgstr "ne mogu pronaći niti jednu mrežnu karticu"
-
-#: ../../standalone/drakfont_.c:261 ../../standalone/drakfont_.c:303
-#: ../../standalone/drakfont_.c:352 ../../standalone/drakfont_.c:410
-#: ../../standalone/drakfont_.c:417 ../../standalone/drakfont_.c:443
-#: ../../standalone/drakfont_.c:455 ../../standalone/drakfont_.c:468
-#, fuzzy
-msgid "done"
-msgstr "Gotov"
-
-#: ../../standalone/drakfont_.c:265
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:301
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:304
-msgid "could not find any font.\n"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:327
-msgid "Search fonts in installed list"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:350
-msgid "Fonts copy"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:353
-#, fuzzy
-msgid "True Type fonts installation"
-msgstr "Pripremam instalaciju"
-
-#: ../../standalone/drakfont_.c:357
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:359
-msgid "True Type install done"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:366 ../../standalone/drakfont_.c:382
-msgid "Fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:370 ../../standalone/drakfont_.c:386
-#: ../../standalone/drakfont_.c:406
-msgid "type1inst building"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:375 ../../standalone/drakfont_.c:390
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:397
-msgid "ttf fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:401
-msgid "pfm fonts conversion"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:411
-msgid "Suppress temporary Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:414
-msgid "Restart XFS"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:453 ../../standalone/drakfont_.c:463
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:465
-#, fuzzy
-msgid "xfs restart"
-msgstr "ograniči"
-
-#: ../../standalone/drakfont_.c:472 ../../standalone/drakfont_.c:760
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts using the normal way. In rare cases, bogus fonts "
-"may hang up your X Server."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:547
-#, fuzzy
-msgid "Fonts Importation"
-msgstr "Formatiraj particije"
-
-#: ../../standalone/drakfont_.c:562
-msgid "Get Windows Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:564
-msgid "Uninstall Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:568
-#, fuzzy
-msgid "Advanced Options"
-msgstr "LAN postavke"
-
-#: ../../standalone/drakfont_.c:570
-#, fuzzy
-msgid "Font List"
-msgstr "Točka montiranja"
-
-#: ../../standalone/drakfont_.c:739
-#, fuzzy
-msgid "Choose the applications that will support the fonts :"
-msgstr "Izaberite particije koje želite formatirati"
-
-#: ../../standalone/drakfont_.c:743
-msgid "Ghostscript"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:747
-#, fuzzy
-msgid "StarOffice"
-msgstr "Ured"
-
-#: ../../standalone/drakfont_.c:751
-#, fuzzy
-msgid "Abiword"
-msgstr "Prekini"
-
-#: ../../standalone/drakfont_.c:755
-#, fuzzy
-msgid "Generic Printers"
-msgstr "Pisac"
-
-#: ../../standalone/drakfont_.c:792
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:828
-#, fuzzy
-msgid "Install List"
-msgstr "Instaliraj sustav"
-
-#: ../../standalone/drakfont_.c:858
-msgid "click here if you are sure."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:860
-msgid "here if no."
-msgstr ""
-
-#: ../../standalone/drakfont_.c:897
-msgid "Unselected All"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:899
-#, fuzzy
-msgid "Selected All"
-msgstr "Odaberite datoteku"
-
-#: ../../standalone/drakfont_.c:901
-#, fuzzy
-msgid "Remove List"
-msgstr "Postavke udaljenog pisača"
-
-#: ../../standalone/drakfont_.c:919 ../../standalone/drakfont_.c:939
-#, fuzzy
-msgid "Initials tests"
-msgstr "Init poruka"
-
-#: ../../standalone/drakfont_.c:920
-#, fuzzy
-msgid "Copy fonts on your system"
-msgstr "Nema mrežnog adaptera na vašem sustavu!"
-
-#: ../../standalone/drakfont_.c:921
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: ../../standalone/drakfont_.c:922
-#, fuzzy
-msgid "Post Install"
-msgstr "Instaliraj"
-
-#: ../../standalone/drakfont_.c:940
-#, fuzzy
-msgid "Remove fonts on your system"
-msgstr "Nema mrežnog adaptera na vašem sustavu!"
-
-#: ../../standalone/drakfont_.c:941
-#, fuzzy
-msgid "Post Uninstall"
-msgstr "Izlaz iz instalacije"
-
-#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:200
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet Veze"
-
-#: ../../standalone/drakgw_.c:138
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje veze prema internetu je trenutno omogućeno"
-
-#: ../../standalone/drakgw_.c:139
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema internetu je već napravljeno.\n"
-"Trenutno je omogućeno.\n"
-"\n"
-"Što želite napraviti?"
-
-#: ../../standalone/drakgw_.c:143
-msgid "disable"
-msgstr "onemogući"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "dismiss"
-msgstr "odustani"
-
-#: ../../standalone/drakgw_.c:143 ../../standalone/drakgw_.c:168
-msgid "reconfigure"
-msgstr "ponovno postavi"
-
-#: ../../standalone/drakgw_.c:146
-msgid "Disabling servers..."
-msgstr "Onemogućujem poslužitelje..."
-
-#: ../../standalone/drakgw_.c:154
-msgid "Internet connection sharing is now disabled."
-msgstr "Dijeljenje veze prema Internetu je trenutno onemogućeno."
-
-#: ../../standalone/drakgw_.c:163
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje veze prema Internetu je trenutno onemogućeno"
-
-#: ../../standalone/drakgw_.c:164
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Postavljanje dijeljenja veze prema Internetu je već napravljeno.\n"
-"Trenutno je onemogućeno.\n"
-"\n"
-"Što želite napraviti?"
-
-#: ../../standalone/drakgw_.c:168
-msgid "enable"
-msgstr "omogući"
-
-#: ../../standalone/drakgw_.c:175
-msgid "Enabling servers..."
-msgstr "Omogućujem poslužitelje..."
-
-#: ../../standalone/drakgw_.c:180
-msgid "Internet connection sharing is now enabled."
-msgstr "Dijeljenje veze prema internetu je trenutno omogućeno."
-
-#: ../../standalone/drakgw_.c:201
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Vaše računalo može biti konfigurirano da dijeli vlastitu Internet vezu.\n"
-"Sa tom značajkom, druga računala na vašoj lokalnoj mreži mogu koristiti "
-"Internet vezu ovog računala.\n"
-"\n"
-"Upozorenje: trebati ćete primjenjeni Mrežni Uređaj za postavljanje lokalne "
-"mreže (LAN)."
-
-#: ../../standalone/drakgw_.c:227
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Međusklop %s (koristi modul %s)"
-
-#: ../../standalone/drakgw_.c:228
-#, c-format
-msgid "Interface %s"
-msgstr "Međusklop %s"
-
-#: ../../standalone/drakgw_.c:236
-msgid "No network adapter on your system!"
-msgstr "Nema mrežnog adaptera na vašem sustavu!"
-
-#: ../../standalone/drakgw_.c:237
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nije pronađen niti jedan mrežni adapter na vašem sustavu. Molimo pokrenite "
-"hardware-ski konfiguracijski alat."
-
-#: ../../standalone/drakgw_.c:243
-msgid "Network interface"
-msgstr "Mrežni međusklop"
-
-#: ../../standalone/drakgw_.c:244
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Postoji samo jedan konfigurirani mrežni adapter na vašem sustavu:\n"
-"\n"
-"%s\n"
-"\n"
-"Postaviti ću lokalnu mrežu (LAN) sa tim adapterom."
-
-#: ../../standalone/drakgw_.c:253
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Molimo odaberite koji mrežni adapter će biti povezan na vašu lokalnu mrežu."
-
-#: ../../standalone/drakgw_.c:271
-#, fuzzy
-msgid "Network interface already configured"
-msgstr "Niste podesili monitor"
-
-#: ../../standalone/drakgw_.c:272
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:277
-#, fuzzy
-msgid "Automatic reconfiguration"
-msgstr "Postava Stila Podizanja"
-
-#: ../../standalone/drakgw_.c:278
-#, fuzzy
-msgid "Show current interface configuration"
-msgstr "Postavke modema"
-
-#: ../../standalone/drakgw_.c:280
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:292
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the C-Class Network that "
-"you use for your local network; I will not reconfigure it and I will not "
-"touch your DHCP server configuration.\n"
-"\n"
-"Else, I can reconfigure your interface and (re)configure a DHCP server for "
-"you.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:297
-msgid "C-Class Local Network"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:298
-#, fuzzy
-msgid "(This) DHCP Server IP"
-msgstr "IP CUPS poslužitelja"
-
-#: ../../standalone/drakgw_.c:299
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: ../../standalone/drakgw_.c:306
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: ../../standalone/drakgw_.c:317
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalni LAN adresni konflikt je pronađen u trenutnoj konfiguraciji %s!\n"
-
-#: ../../standalone/drakgw_.c:325 ../../standalone/drakgw_.c:331
-msgid "Firewalling configuration detected!"
-msgstr "Detektirana je vatrozidna konfiguracija!"
-
-#: ../../standalone/drakgw_.c:326 ../../standalone/drakgw_.c:332
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fix after installation."
-msgstr ""
-"Upozorenje! Postojeća vatrozidna konfiguracija je pronađena. Morati ćete "
-"ručno popraviti neke dijelove nakon instalacije."
-
-#: ../../standalone/drakgw_.c:340
-msgid "Configuring..."
-msgstr "Podešavam..."
-
-#: ../../standalone/drakgw_.c:341
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Podešavam skriptove, instaliram softver, pokrećem poslužitelje..."
-
-#: ../../standalone/drakgw_.c:378
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problem prilikom instaliranja paketa %s"
-
-#: ../../standalone/drakgw_.c:672
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"Sve je konfigurirano.\n"
-"Sada možete dijeliti vašu internet vezu sa drugim računalima na vašoj "
-"lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP)."
-
-#: ../../standalone/drakgw_.c:689
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Postavljanje je već urađeno, ali je trenutno onemogućeno."
-
-#: ../../standalone/drakgw_.c:690
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Postavljanje je već urađeno, ali je trenutno omogućeno."
-
-#: ../../standalone/drakgw_.c:691
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Dijeljenje veze prema internetu nije bilo konfigurirano."
-
-#: ../../standalone/drakgw_.c:696
-msgid "Internet connection sharing configuration"
-msgstr "Postavke dijeljenja internet veze"
-
-#: ../../standalone/drakgw_.c:703
-#, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Dobro došli u alat za konfiguriranje dijeljenja Internet veze!\n"
-"\n"
-"%s\n"
-"\n"
-"Kliknite na Postavke ukoliko želite pokreniti čarobnjak za postavljanja."
-
-#: ../../standalone/draknet_.c:80
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Mrežne postavke (%d adaptera)"
-
-#: ../../standalone/draknet_.c:87 ../../standalone/draknet_.c:595
-msgid "Profile: "
-msgstr "Profil: "
-
-#: ../../standalone/draknet_.c:95
-msgid "Del profile..."
-msgstr "Obriši profil..."
-
-#: ../../standalone/draknet_.c:101
-msgid "Profile to delete:"
-msgstr "Profil za obrisati:"
-
-#: ../../standalone/draknet_.c:129
-msgid "New profile..."
-msgstr "Novi profil..."
-
-#: ../../standalone/draknet_.c:135
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-
-#: ../../standalone/draknet_.c:161
-msgid "Hostname: "
-msgstr "Ime računala: "
-
-#: ../../standalone/draknet_.c:168
-msgid "Internet access"
-msgstr "Internet pristup"
-
-#: ../../standalone/draknet_.c:181
-msgid "Type:"
-msgstr "Tip:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: ../../standalone/draknet_.c:184 ../../standalone/draknet_.c:376
-msgid "Interface:"
-msgstr "Međusklop:"
-
-#: ../../standalone/draknet_.c:195
-msgid "Status:"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:202
-msgid "Wait please"
-msgstr ""
-
-#: ../../standalone/draknet_.c:220
-msgid "Configure Internet Access..."
-msgstr "Podešavanje Internet Pristupa..."
-
-#: ../../standalone/draknet_.c:227 ../../standalone/draknet_.c:449
-msgid "LAN configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/draknet_.c:232
-msgid "Driver"
-msgstr "Upravljački program"
-
-#: ../../standalone/draknet_.c:232
-msgid "Interface"
-msgstr "Međusklop"
-
-#: ../../standalone/draknet_.c:232
-msgid "Protocol"
-msgstr "Protokol"
-
-#: ../../standalone/draknet_.c:232
-#, fuzzy
-msgid "State"
-msgstr "Status:"
-
-#: ../../standalone/draknet_.c:244
-msgid "Configure Local Area Network..."
-msgstr "Podesi lokalnu mrežu..."
-
-#: ../../standalone/draknet_.c:256
-msgid "Click here to launch the wizard ->"
-msgstr ""
-
-#: ../../standalone/draknet_.c:257
-msgid "Wizard..."
-msgstr "Čarobnjak..."
-
-#: ../../standalone/draknet_.c:283
-msgid "Apply"
-msgstr "Primjeni"
-
-#: ../../standalone/draknet_.c:302
-msgid "Please Wait... Applying the configuration"
-msgstr "Molimo pričekajte... Primjenjujem konfiguraciju"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Connected"
-msgstr "Povezan"
-
-#: ../../standalone/draknet_.c:384 ../../standalone/draknet_.c:407
-msgid "Not connected"
-msgstr "Nije povezan"
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Connect..."
-msgstr "Poveži..."
-
-#: ../../standalone/draknet_.c:385 ../../standalone/draknet_.c:408
-msgid "Disconnect..."
-msgstr "Odspoji..."
-
-#: ../../standalone/draknet_.c:404
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/draknet_.c:431
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate niti jedan konfigurirani međusklop.\n"
-"Konfigurirajte ga prvo klikanjem na 'Postavljanje'"
-
-#: ../../standalone/draknet_.c:453
-msgid "LAN Configuration"
-msgstr "LAN postavke"
-
-#: ../../standalone/draknet_.c:464
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: ../../standalone/draknet_.c:470
-msgid "Boot Protocol"
-msgstr "Boot protokol"
-
-#: ../../standalone/draknet_.c:471
-msgid "Started on boot"
-msgstr "Pokrenuto pri podizanju"
-
-#: ../../standalone/draknet_.c:472
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "activate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:497 ../../standalone/draknet_.c:500
-#, fuzzy
-msgid "deactivate now"
-msgstr "Aktivno"
-
-#: ../../standalone/draknet_.c:503
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-
-#: ../../standalone/draknet_.c:560
-msgid ""
-"You don't have any internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Nemate niti jednu internet vezu.\n"
-"Napravite jednu klikanjem na 'Podesi'"
-
-#: ../../standalone/draknet_.c:584
-msgid "Internet connection configuration"
-msgstr "Postava Internet veze"
-
-#: ../../standalone/draknet_.c:588
-msgid "Internet Connection Configuration"
-msgstr "Postava Internet veze"
-
-#: ../../standalone/draknet_.c:597
-msgid "Connection type: "
-msgstr "Tip veze: "
-
-#: ../../standalone/draknet_.c:603
-msgid "Parameters"
-msgstr "Parametri"
-
-#: ../../standalone/draknet_.c:621
-msgid "Gateway"
-msgstr "Gateway"
-
-#: ../../standalone/draknet_.c:630
-msgid "Ethernet Card"
-msgstr "Ethernet kartica"
-
-#: ../../standalone/draknet_.c:631
-msgid "DHCP Client"
-msgstr "DHCP klijent"
-
-#: ../../standalone/draksec_.c:31
-msgid "Setting security level"
-msgstr "Podešavam sigurnosni nivo"
-
-#: ../../standalone/drakxconf_.c:47
-msgid "Control Center"
-msgstr "Kontrolni Centar"
-
-#: ../../standalone/drakxconf_.c:48
-msgid "Choose the tool you want to use"
-msgstr "Izaberite alat koje želite koristiti"
-
-#: ../../standalone/drakxtv_.c:48
-#, fuzzy
-msgid "Canada (cable)"
-msgstr "Kanadska (Quebec)"
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:48
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "China (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (bcast)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:49
-msgid "Japan (cable)"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-msgid "East Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:50
-#, fuzzy
-msgid "Ireland"
-msgstr "Islandska"
-
-#: ../../standalone/drakxtv_.c:50
-msgid "West Europe"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:51
-#, fuzzy
-msgid "Australia"
-msgstr "serijski"
-
-#: ../../standalone/drakxtv_.c:51
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:52
-msgid "South Africa"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:53
-msgid "Argentina"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:58
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:60
-msgid "TV norm :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:61
-msgid "Area :"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:65
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:72
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:83
-msgid "No TV Card detected!"
-msgstr ""
-
-#: ../../standalone/drakxtv_.c:84
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-
-#: ../../standalone/keyboarddrake_.c:16
-msgid "usage: keyboarddrake [--expert] [keyboard]\n"
-msgstr "uporaba: keyboarddrake [--exper] [keyboard]\n"
-
-#: ../../standalone/keyboarddrake_.c:29
-msgid "Please, choose your keyboard layout."
-msgstr "Molim izaberite raspored tipkovnice."
-
-#: ../../standalone/keyboarddrake_.c:36
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Da li želite da BackSpace vrati Delete u konzoli?"
-
-#: ../../standalone/livedrake_.c:24
-msgid "Change Cd-Rom"
-msgstr "Promjeni Cd-Rom"
-
-#: ../../standalone/livedrake_.c:25
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Molimo ubacite Instalacijski Cd-Rom u vaš pogon i pritisnite U redu kada ste "
-"završili.\n"
-"Ukoliko ga nemate, pritisnite Odustani kako bi izbjegli živu nadogradnju."
-
-#: ../../standalone/livedrake_.c:35
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Ne mogu pokrenuti živu nadogradnju !!!\n"
-
-#: ../../standalone/localedrake_.c:32
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:501
-msgid "logdrake"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:95
-msgid "Show only for the selected day"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "/File/_New"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../standalone/logdrake_.c:102
-#, fuzzy
-msgid "<control>N"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:103
-#, fuzzy
-msgid "/File/_Open"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../standalone/logdrake_.c:103
-#, fuzzy
-msgid "<control>O"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:104
-#, fuzzy
-msgid "/File/_Save"
-msgstr "/Datoteka/_Izlaz"
-
-#: ../../standalone/logdrake_.c:104
-#, fuzzy
-msgid "<control>S"
-msgstr "<control>Q"
-
-#: ../../standalone/logdrake_.c:105
-msgid "/File/Save _As"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:106
-#, fuzzy
-msgid "/File/-"
-msgstr "/_Datoteka"
-
-#: ../../standalone/logdrake_.c:108
-#, fuzzy
-msgid "/_Options"
-msgstr "Opcije"
-
-#: ../../standalone/logdrake_.c:109
-#, fuzzy
-msgid "/Options/Test"
-msgstr "Opcije"
-
-#: ../../standalone/logdrake_.c:110
-msgid "/_Help"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:111
-msgid "/Help/_About..."
-msgstr ""
-
-#: ../../standalone/logdrake_.c:118
-msgid "-misc-fixed-medium-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:119
-msgid "-misc-fixed-bold-r-*-*-*-100-*-*-*-*-*-*,*"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:173
-#, fuzzy
-msgid "User"
-msgstr "Korisničko ime"
-
-#: ../../standalone/logdrake_.c:174
-#, fuzzy
-msgid "Messages"
-msgstr "Testne stranice"
-
-#: ../../standalone/logdrake_.c:175
-msgid "Syslog"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:176
-msgid "Mandrake Tools Explanations"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:179
-msgid "search"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:185
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:186
-msgid "Settings"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:191
-#, fuzzy
-msgid "matching"
-msgstr "Procjenjujem"
-
-#: ../../standalone/logdrake_.c:192
-msgid "but not matching"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:196
-#, fuzzy
-msgid "Choose file"
-msgstr "Izaberite datoteku"
-
-#: ../../standalone/logdrake_.c:201
-#, fuzzy
-msgid "Calendar"
-msgstr "Standardno"
-
-#: ../../standalone/logdrake_.c:211
-#, fuzzy
-msgid "Content of the file"
-msgstr "Spoji se na Internet"
-
-#: ../../standalone/logdrake_.c:215 ../../standalone/logdrake_.c:390
-msgid "Mail/SMS alert"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:268
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Molimo pričekajte, Pripremam instalaciju"
-
-#: ../../standalone/logdrake_.c:405
-#, fuzzy
-msgid "Mail/SMS alert configuration"
-msgstr "Postava Interneta"
-
-#: ../../standalone/logdrake_.c:406
-#, fuzzy
-msgid ""
-"Welcome to the mail/SMS configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Dobro došli u pomoćni program za konfiguriranje proxy-a.\n"
-"\n"
-"Ovdje ćete moći postaviti vaš http i ftp proxi-e\n"
-"sa ili bez logina i lozinke\n"
-
-# ../../share/compssUsers
-#: ../../standalone/logdrake_.c:414
-#, fuzzy
-msgid "proftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: ../../standalone/logdrake_.c:417
-msgid "sshd"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:418
-msgid "webmin"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:419
-#, fuzzy
-msgid "xinetd"
-msgstr "Izlaz"
-
-#: ../../standalone/logdrake_.c:422
-#, fuzzy
-msgid "service setting"
-msgstr "uređaj"
-
-#: ../../standalone/logdrake_.c:423
-msgid ""
-"You will receive an alert if one of the selected service is no more running"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:433
-#, fuzzy
-msgid "load setting"
-msgstr "Formatiram"
-
-#: ../../standalone/logdrake_.c:434
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:447
-#, fuzzy
-msgid "alert configuration"
-msgstr "Postava Interneta"
-
-#: ../../standalone/logdrake_.c:448
-msgid "Configure the way the system will alert you"
-msgstr ""
-
-#: ../../standalone/logdrake_.c:478
-msgid "Save as.."
-msgstr ""
-
-#: ../../standalone/mousedrake_.c:49
-msgid "Please, choose the type of your mouse."
-msgstr "Molim izaberite koju vrstu miša koristite."
-
-#: ../../standalone/mousedrake_.c:59
-msgid "no serial_usb found\n"
-msgstr "niti jedan serial_usb nije pronađen\n"
-
-#: ../../standalone/mousedrake_.c:63
-msgid "Emulate third button?"
-msgstr "Emuliranje treće tipke?"
-
-#: ../../standalone/scannerdrake_.c:53
-#, c-format
-msgid "%s found on %s, configure it ?"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:60
-#, fuzzy
-msgid "Select a scanner"
-msgstr "Odaberite grafičku karticu"
-
-#: ../../standalone/scannerdrake_.c:80
-#, c-format
-msgid "This %s scanner is unsupported"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:94
-#, c-format
-msgid ""
-"Scannerdrake was not able to detect your %s scanner.\n"
-"Please select the device where your scanner is plugged"
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:96
-#, fuzzy
-msgid "choose device"
-msgstr "Boot uređaj"
-
-#: ../../standalone/scannerdrake_.c:102
-#, c-format
-msgid ""
-"This %s scanner must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
-
-#: ../../standalone/scannerdrake_.c:107
-#, c-format
-msgid ""
-"Your %s scanner has been configured.\n"
-"You may now scan documents using ``XSane'' from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-
-#: ../../standalone/tinyfirewall_.c:31
-msgid "Firewalling Configuration"
-msgstr "Vatrozidne postave"
-
-#: ../../standalone/tinyfirewall_.c:44
-msgid "Firewalling configuration"
-msgstr "Vatrozidne postave"
-
-#: ../../standalone/tinyfirewall_.c:79
-msgid ""
-"Firewalling\n"
-"\n"
-"You already have set up a firewall.\n"
-"Click on Configure to change or remove the firewall"
-msgstr ""
-"Vatrozidi\n"
-"\n"
-"Već ste postavili vatrozid.\n"
-"Kliknite na Podesi za promjenu ili brisanje vatrozida"
-
-#: ../../standalone/tinyfirewall_.c:83
-msgid ""
-"Firewalling\n"
-"\n"
-"Click on Configure to set up a standard firewall"
-msgstr ""
-"Vatrozidi\n"
-"\n"
-"Kliknite na Podesi za postavljanje standardnog vatrozida"
-
-#: ../../steps.pm_.c:14
-msgid "Choose your language"
-msgstr "Odaberite jezik"
-
-#: ../../steps.pm_.c:15
-msgid "Select installation class"
-msgstr "Odaberite razred instalacije"
-
-#: ../../steps.pm_.c:16
-msgid "Hard drive detection"
-msgstr "Otkrivanje hard diskova"
-
-#: ../../steps.pm_.c:17
-msgid "Configure mouse"
-msgstr "Podesi miš"
-
-#: ../../steps.pm_.c:18
-msgid "Choose your keyboard"
-msgstr "Odaberite tipkovnicu"
-
-#: ../../steps.pm_.c:19
-msgid "Security"
-msgstr "Sigurnost"
-
-#: ../../steps.pm_.c:20
-msgid "Setup filesystems"
-msgstr "Podesi datotečne sustave"
-
-#: ../../steps.pm_.c:21
-msgid "Format partitions"
-msgstr "Formatiraj particije"
-
-#: ../../steps.pm_.c:22
-msgid "Choose packages to install"
-msgstr "Izabir instaliranih paketa"
-
-#: ../../steps.pm_.c:23
-msgid "Install system"
-msgstr "Instaliraj sustav"
-
-#: ../../steps.pm_.c:25
-msgid "Add a user"
-msgstr "Dodaj korisnika"
-
-#: ../../steps.pm_.c:26
-msgid "Configure networking"
-msgstr "Podesi mrežu"
-
-#: ../../steps.pm_.c:28
-msgid "Configure services"
-msgstr "Podešavanje servisa"
-
-#: ../../steps.pm_.c:29
-msgid "Install bootloader"
-msgstr "Instaliraj bootloader"
-
-#: ../../steps.pm_.c:31
-msgid "Create a bootdisk"
-msgstr "Napravi boot disketu"
-
-#: ../../steps.pm_.c:33
-msgid "Configure X"
-msgstr "Podesi X"
-
-#: ../../steps.pm_.c:34
-#, fuzzy
-msgid "Install system updates"
-msgstr "Instaliraj sustav"
-
-#: ../../steps.pm_.c:35
-msgid "Exit install"
-msgstr "Izlaz iz instalacije"
-
-#: ../../tinyfirewall.pm_.c:9
-msgid ""
-"tinyfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"tinyfirewall podešavanje\n"
-"\n"
-"Ovo podešava osobni vatrozid za ovo Mandrake Linux računalo.\n"
-"Za snažno primjenjena vatrozidna rješenja, molimo pogledajte\n"
-"specijaliziranu MandrakeSecurity Firewall distribuciju."
-
-#: ../../tinyfirewall.pm_.c:14
-msgid ""
-"We'll now ask you questions about which services you'd like to allow\n"
-"the Internet to connect to. Please think carefully about these\n"
-"questions, as your computer's security is important.\n"
-"\n"
-"Please, if you're not currently using one of these services, firewall\n"
-"it off. You can change this configuration anytime you like by\n"
-"re-running this application!"
-msgstr ""
-"Sada ćemo vas pitati nekoliko pitanja o servisima koje želite dozvoliti\n"
-"Internetu da se spoji. Molimo razmislite pažljivo o tim\n"
-"pitanjima, jer sigurnost vašeg računala je važna.\n"
-"\n"
-"Molimo, ukoliko ne koristite trenutno jedan od tih servisa, postavite\n"
-"vatrozid. Možete promjeniti ovu konfiguraciju bilo kad zaželite\n"
-"pokretanjem ponovno ove aplikacije!"
-
-#: ../../tinyfirewall.pm_.c:21
-msgid ""
-"Are you running a web server on this machine that you need the whole\n"
-"Internet to see? If you are running a webserver that only needs to be\n"
-"accessed by this machine, you can safely answer NO here.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut web poslužitelj na ovom računalu kojeg treba cijeli\n"
-"Internet vidjeti? Ukoliko trebate web poslužitelj kojemu će biti pristupan\n"
-"samo sa ovog računala, možete sigurno odgovoriti NE ovdje.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:26
-msgid ""
-"Are you running a name server on this machine? If you didn't set one\n"
-"up to give away IP and zone information to the whole Internet, please\n"
-"answer no.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut imenski poslužitelj na ovom računalu? Ukoliko niste "
-"postavili jedan\n"
-"da daje IP i informacije o zoni cijelom Internet-u, molimo\n"
-"odgovorite ne.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:31
-msgid ""
-"Do you want to allow incoming Secure Shell (ssh) connections? This\n"
-"is a telnet-replacement that you might use to login. If you're using\n"
-"telnet now, you should definitely switch to ssh. telnet is not\n"
-"encrypted -- so some attackers can steal your password if you use\n"
-"it. ssh is encrypted and doesn't allow for this eavesdropping."
-msgstr ""
-"Da li želite omogućiti dolazeće Secure Shell (ssh) veze? To je\n"
-"je telnet zamjena što možete koristiti za prijavljivanje. Ako sada "
-"koristite\n"
-"telnet, trebali biste definitivno se prebaciti na ssh. telnet nije\n"
-"enkriptiran -- tako da neki napadači mogu ukrasti vaše lozinke ako ga "
-"koristite\n"
-"ssh je enkriptiran i nedozvoljava prisluškivanje (sniffanje)."
-
-#: ../../tinyfirewall.pm_.c:36
-msgid ""
-"Do you want to allow incoming telnet connections?\n"
-"This is horribly unsafe, as we explained in the previous screen. We\n"
-"strongly recommend answering No here and using ssh in place of\n"
-"telnet.\n"
-msgstr ""
-"Da li želite dopustiti dolazeće telnet veze?\n"
-"Ovo je užasno nesigurno, kao što smo objasnili na prethodnom zaslonu. Mi\n"
-"jako preporučamo odgovaranjem Ne ovdje i korištenjem ssh-a umjesto\n"
-"telnet-a.\n"
-
-#: ../../tinyfirewall.pm_.c:41
-msgid ""
-"Are you running an FTP server here that you need accessible to the\n"
-"Internet? If you are, we strongly recommend that you only use it for\n"
-"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n"
-"attackers, since FTP also uses no encryption for transferring passwords.\n"
-msgstr ""
-"Da li imate pokrenut FTP poslužitelj ovdje koji treba biti dostupan\n"
-"Internet-u? Ukoliko da, jako preporučamo da ga koristite samo za\n"
-"anonimni prijenos. Svaka lozinka prenesena FTP-om može biti ukradena od\n"
-"nekih napadača, jer FTP također ne koristi enkripciju za prijenos lozinki.\n"
-
-#: ../../tinyfirewall.pm_.c:46
-msgid ""
-"Are you running a mail server here? If you're sending you \n"
-"messages through pine, mutt or any other text-based mail client,\n"
-"you probably are. Otherwise, you should firewall this off.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut mail poslužitelj ovdje? Ako šaljete vaše \n"
-"poruke kroz pine, mutt ili neki drugi tekst-bazirani mail klijent,\n"
-"vjerojatno ga koristite. Ako ne, trebali biste ga odijeliti vatrozidom.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:51
-msgid ""
-"Are you running a POP or IMAP server here? This would\n"
-"be used to host non-web-based mail accounts for people via \n"
-"this machine.\n"
-"\n"
-msgstr ""
-"Da li imate pokrenut POP ili IMAP poslužitelj ovdje? Ovo može\n"
-"koristiti za posluživanje ne-web-baziranih mail računa za osobe preko\n"
-"ovog računala.\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:56
-msgid ""
-"You appear to be running a 2.2 kernel. If your network IP\n"
-"is automatically set by a computer in your home or office \n"
-"(dynamically assigned), we need to allow for this. Is\n"
-"this the case?\n"
-msgstr ""
-"Čini se da imate pokrenut 2.2 kernel. Ukoliko je vaša IP\n"
-"adresa automatski postavljena u vašem domu ili uredu\n"
-"(dinamički dodjeljenja), moramo to dozvoliti. Da\n"
-"li je to slučaj?\n"
-
-#: ../../tinyfirewall.pm_.c:61
-msgid ""
-"Is your computer getting time syncronized to another computer?\n"
-"Mostly, this is used by medium-large Unix/Linux organizations\n"
-"to synchronize time for logging and such. If you're not part\n"
-"of a larger office and haven't heard of this, you probably \n"
-"aren't."
-msgstr ""
-"Da li se vaše računalo vremenski sinkronizira sa drugim računalom?\n"
-"Većinom, ovo se koristi kod srednje-velikih Unix/Linux organizacija\n"
-"za sinkronizaciju vremena za zapisivanje/logiranje i slično. Ukoliko\n"
-"niste dio većeg ureda ili niste čuli za ovo, vjerojatno\n"
-"ne."
-
-#: ../../tinyfirewall.pm_.c:66
-msgid ""
-"Configuration complete. May we write these changes to disk?\n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-"Podešavanje završeno. Možemo li zapisati ove promjene na disk?\n"
-"\n"
-"\n"
-"\n"
-
-#: ../../tinyfirewall.pm_.c:82
-#, c-format
-msgid "Can't open %s: %s\n"
-msgstr "Ne mogu otvoriti %s: %s\n"
-
-#: ../../tinyfirewall.pm_.c:84
-#, c-format
-msgid "Can't open %s for writing: %s\n"
-msgstr "Ne mogu otvoriti %s za pisanje: %s\n"
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "No I don't need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:180
-msgid "Yes I need DHCP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "No I don't need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:181
-msgid "Yes I need NTP"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-msgid "Don't Save"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:182 ../../tinyfirewall.pm_.c:186
-#: ../../tinyfirewall.pm_.c:206
-msgid "Save & Quit"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:197 ../../tinyfirewall.pm_.c:201
-#, fuzzy
-msgid "Firewall Configuration Wizard"
-msgstr "Vatrozidne postave"
-
-#: ../../tinyfirewall.pm_.c:199
-msgid "No (firewall this off from the internet)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:200
-msgid "Yes (allow this through the firewall)"
-msgstr ""
-
-#: ../../tinyfirewall.pm_.c:232
-#, fuzzy
-msgid "Please Wait... Verifying installed packages"
-msgstr "Molimo pričekajte, Pripremam instalaciju"
-
-#: ../../tinyfirewall.pm_.c:238
-#, c-format
-msgid ""
-"Failure installing the needed packages : %s and Bastille.\n"
-" Try to install them manually."
-msgstr ""
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: ../../share/compssUsers:999
-msgid "Network Computer (client)"
-msgstr "Mrežno računalo (klijent)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS poslužitelj, SMB poslužitelj, Proxy poslužitelj, SSH poslužitelj"
-
-#: ../../share/compssUsers:999
-msgid "Office"
-msgstr "Ured"
-
-#: ../../share/compssUsers:999
-msgid "Gnome Workstation"
-msgstr "Gnome radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools for your Palm Pilot or your Visor"
-msgstr "Alati za vaš Palm Pilot ili vaš Visor"
-
-#: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr "Vatrozid/Ruter"
-
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr "Ime Domene i Mrežni Informacijki Poslužitelj (NIS)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Uredski programi: tekst procesori (kword, abiword), tablični kalkulatori "
-"(kspread, gnumeric), pdf preglednici, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Audio-related tools: mp3 or midi players, mixers, etc"
-msgstr "Audio-namjenjeni alati: mp3 ili midi svirači, mikseri, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i Howto-i o Linux-u i slobodnom software-u"
-
-#: ../../share/compssUsers:999
-msgid "KDE Workstation"
-msgstr "KDE radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Video"
-msgstr "Multimedija - Video"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Set of tools for mail, news, web, file transfer, and chat"
-msgstr "Skup alata za mail, news, web, datotečni prijenos, i razgovor"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr "Baze"
-
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL poslužitelj baza"
-
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lako podešavanje vašeg računala"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Sound"
-msgstr "Multimedija - Zvuk"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Utilities"
-msgstr "Pomoćni programi"
-
-#: ../../share/compssUsers:999
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Console Tools"
-msgstr "Konzolni Alati"
-
-#: ../../share/compssUsers:999
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail poslužitelj, Inn news poslužitelj"
-
-#: ../../share/compssUsers:999
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia station"
-msgstr "Multimedijska stanica"
-
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "LAN postavke"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "More Graphical Desktops (Gnome, IceWM)"
-msgstr "Više grafičkih radnih okružja (Gnome, IceWM)"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Radno Okružje, osnovno grafičko okružje sa kolekcijom pripadajućih alata"
-
-#: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafičko Okružje"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
-msgstr "Apache i Pro-ftpd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Tools to create and burn CD's"
-msgstr "Alati za pravljenje i prženje CD-a"
-
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Uredska radna stanica"
-
-#: ../../share/compssUsers:999
-msgid "Server"
-msgstr "Poslužitelj"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Gnome, Icewm, Window Maker, Enlightenment, Fvwm, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Graphics programs such as The Gimp"
-msgstr "Grafički programi poput Gimp-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr "DNS/NIS "
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ razvojne biblioteke, programi i uključujuće datoteke"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Network Computer server"
-msgstr "Mrežni računalni poslužitelj"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Mail/Groupware/News"
-msgstr "Mail/Groupware/News"
-
-#: ../../share/compssUsers:999
-msgid "Game station"
-msgstr "Igračka radna stanica"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Video players and editors"
-msgstr "Video playeri i uređivači"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - Graphics"
-msgstr "Multimedija - Grafika"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkade, ploče, strategije, itd"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"Set of tools to read and send mail and news (pine, mutt, tin..) and to "
-"browse the Web"
-msgstr ""
-"Pribor alata za čitanje i slanje mail-a i news-a (pine, mutt, tin..) i za "
-"pregled Web-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Archiving, emulators, monitoring"
-msgstr "Arhiviranje, emulatori, praćenje"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Finance"
-msgstr "Osobne financije"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafička okružja sa korisnički prijateljskim skupom aplikacija i alatima za "
-"radno okružje"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razne protokole uključujući ssh"
-
-#: ../../share/compssUsers:999
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
-msgstr "Zvučni i video svirački/uređivački programi"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Druga grafička radna okružja"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
-msgstr "Uređivači, ljuske, datotečni alati, terminali"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Programs to manage your finance, such as gnucash"
-msgstr "Programi za uređivanje vaših financija, poput gnucash-a"
-
-# ../../share/compssUsers
-#: ../../share/compssUsers:999
-msgid "Personal Information Management"
-msgstr "Osobni informacijski menadžment"
-
-#: ../../share/compssUsers:999
-msgid "Multimedia - CD Burning"
-msgstr "Multimedija - CD prženje"
-
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Znanstvena radna stanica"
diff --git a/perl-install/share/po/hu.po b/perl-install/share/po/hu.po
deleted file mode 100644
index fd44cc152..000000000
--- a/perl-install/share/po/hu.po
+++ /dev/null
@@ -1,12496 +0,0 @@
-# Translation file of Mandrake graphic install
-# Copyright (C) 2000 Mandrakesoft
-# KOVACS Emese Alexandra <emese@itp.hu>, 2000, 2001
-# Kultsar Kadosa Atilla <kadi@kadi.emg.hu>, 2000
-# Takacs Sandor <taki@dfmk.hu>, 2000
-# Timar Andras <atimar@itp.hu>, 2000
-# Sari Gabor <saga@tux.hu>, 2000
-# Tamas Szanto <tszanto@mol.hu>, 2001
-# Arpad Biro <biro_arpad@yahoo.com>, 2002
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2002-03-11 18:29+0100\n"
-"PO-Revision-Date: 2002-03-13 01:27GMT+1\n"
-"Last-Translator: Arpad Biro <biro_arpad@yahoo.com>\n"
-"Language-Team: Hungarian\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.5\n"
-
-#: ../../Xconfigurator.pm_.c:242
-msgid "Configure all heads independently"
-msgstr "A képernyők egymástól független beállítása"
-
-#: ../../Xconfigurator.pm_.c:243
-msgid "Use Xinerama extension"
-msgstr "A Xinerama kiterjesztés használata"
-
-#: ../../Xconfigurator.pm_.c:246
-#, c-format
-msgid "Configure only card \"%s\" (%s)"
-msgstr "Csak a(z) \"%s\" (%s) kártya beállítása"
-
-#: ../../Xconfigurator.pm_.c:249
-msgid "Multi-head configuration"
-msgstr "A többképernyős mód beállítása"
-
-#: ../../Xconfigurator.pm_.c:250
-msgid ""
-"Your system support multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"A grafikus kártya lehetővé teszi több képernyő használatát.\n"
-"Mit szeretne tenni?"
-
-#: ../../Xconfigurator.pm_.c:261
-msgid "Graphic card"
-msgstr "Grafikus kártya"
-
-#: ../../Xconfigurator.pm_.c:262
-msgid "Select a graphic card"
-msgstr "Válasszon egy grafikus kártyát"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "Choose a X server"
-msgstr "Válasszon egy X-kiszolgálót"
-
-#: ../../Xconfigurator.pm_.c:286
-msgid "X server"
-msgstr "X-kiszolgáló"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "Choose a X driver"
-msgstr "Válasszon egy X-meghajtót"
-
-#: ../../Xconfigurator.pm_.c:293
-msgid "X driver"
-msgstr "X-meghajtó"
-
-#: ../../Xconfigurator.pm_.c:360 ../../Xconfigurator.pm_.c:366
-#: ../../Xconfigurator.pm_.c:416 ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfigurator.pm_.c:363
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Melyik XFree-t szeretné használni?"
-
-#: ../../Xconfigurator.pm_.c:374
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A kártya támogat hardveres 3D-s gyorsítást, de csak az XFree %s verzióban.\n"
-"Az XFree %s is használható; elképzelhető, hogy abban jobb a 2D-s támogatás."
-
-#: ../../Xconfigurator.pm_.c:376 ../../Xconfigurator.pm_.c:409
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "A kártya támogat hardveres 3D-s gyorsítást az XFree %s verzióval."
-
-#: ../../Xconfigurator.pm_.c:378 ../../Xconfigurator.pm_.c:411
-#: ../../Xconfigurator.pm_.c:1507
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s hardveres 3D-s gyorsítással"
-
-#: ../../Xconfigurator.pm_.c:386 ../../Xconfigurator.pm_.c:400
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"A kártya támogat hardveres 3D-s gyorsítást az XFree %s verzióban,\n"
-"DE EZ KÍSÉRLETI JELLEGŰ, HASZNÁLATA AKÁR A GÉP LEFAGYÁSÁHOZ IS VEZETHET!"
-
-#: ../../Xconfigurator.pm_.c:388 ../../Xconfigurator.pm_.c:402
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s KÍSÉRLETI JELLEGŰ hardveres 3D-s gyorsítással"
-
-#: ../../Xconfigurator.pm_.c:397
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"A kártya támogat hardveres 3D-s gyorsítást, de csak az XFree %s verzióban.\n"
-"EZ KÍSÉRLETI JELLEGŰ; HASZNÁLATA AKÁR A GÉP LEFAGYÁSÁHOZ IS VEZETHET.\n"
-"Az XFree %s verzió is használható; elképzelhető, hogy ebben jobb a 2D-s\n"
-"támogatás."
-
-#: ../../Xconfigurator.pm_.c:417
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (telepítési meghajtóprogram)"
-
-#: ../../Xconfigurator.pm_.c:421
-msgid "XFree configuration"
-msgstr "XFree-beállítások"
-
-#: ../../Xconfigurator.pm_.c:496
-msgid "Select the memory size of your graphic card"
-msgstr "Válassza ki a grafikus kártyán található memória mennyiségét"
-
-#: ../../Xconfigurator.pm_.c:550
-msgid "Choose options for server"
-msgstr "Az X beállításai"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Choose a monitor"
-msgstr "A monitor kiválasztása"
-
-#: ../../Xconfigurator.pm_.c:574
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfigurator.pm_.c:577
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"A két legfontosabb paraméter a függőleges frissítés frekvenciája (a teljes\n"
-"képernyő frissítési gyorsasága) és a vízszintes frissítés frekvenciája (a\n"
-"vízszintes sorok megjelenítésének gyorsasága).\n"
-"\n"
-"NAGYON FONTOS, hogy egyik se lépje túl a monitorhoz engedélyezett\n"
-"felső határértéket, mert ilyenkor esetleg a monitor megsérülhet.\n"
-"Ha nem ismeri a monitor jellemzőit, válasszon egy biztonságosan\n"
-"alacsony értéket!"
-
-#: ../../Xconfigurator.pm_.c:584
-msgid "Horizontal refresh rate"
-msgstr "Vízszintes frissítés"
-
-#: ../../Xconfigurator.pm_.c:585
-msgid "Vertical refresh rate"
-msgstr "Függőleges frissítés"
-
-#: ../../Xconfigurator.pm_.c:622
-msgid "Monitor not configured"
-msgstr "A monitor nincs beállítva"
-
-#: ../../Xconfigurator.pm_.c:625
-msgid "Graphic card not configured yet"
-msgstr "A grafikus kártya még nincs beállítva"
-
-#: ../../Xconfigurator.pm_.c:628
-msgid "Resolutions not chosen yet"
-msgstr "A felbontások még nincsenek beállítva"
-
-#: ../../Xconfigurator.pm_.c:646
-msgid "Do you want to test the configuration?"
-msgstr "Ki szeretné próbálni a beállításokat?"
-
-#: ../../Xconfigurator.pm_.c:650
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Vigyázat! A grafikus kártya kipróbálása esetleg a gép lefagyásához is "
-"vezethet!"
-
-#: ../../Xconfigurator.pm_.c:653
-msgid "Test of the configuration"
-msgstr "A beállítások kipróbálása"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid ""
-"\n"
-"try to change some parameters"
-msgstr ""
-"\n"
-"változtasson meg néhány paramétert"
-
-#: ../../Xconfigurator.pm_.c:692 ../../Xconfigurator.pm_.c:704
-msgid "An error has occurred:"
-msgstr "Hiba történt:"
-
-#: ../../Xconfigurator.pm_.c:731
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Kilépés %d másodperc múlva"
-
-#: ../../Xconfigurator.pm_.c:742
-msgid "Is this the correct setting?"
-msgstr "Megfelelő ez a beállítás?"
-
-#: ../../Xconfigurator.pm_.c:751
-msgid "An error has occurred, try to change some parameters"
-msgstr "Hiba történt, változtasson meg néhány paramétert"
-
-#: ../../Xconfigurator.pm_.c:822
-msgid "Resolution"
-msgstr "Felbontás"
-
-#: ../../Xconfigurator.pm_.c:874
-msgid "Choose the resolution and the color depth"
-msgstr "Válassza ki a felbontást és a színmélységet"
-
-#: ../../Xconfigurator.pm_.c:876
-#, c-format
-msgid "Graphic card: %s"
-msgstr "Grafikus kártya: %s"
-
-#: ../../Xconfigurator.pm_.c:877
-#, c-format
-msgid "XFree86 server: %s"
-msgstr "XFree86: %s"
-
-#: ../../Xconfigurator.pm_.c:891 ../../diskdrake/interactive.pm_.c:259
-#: ../../install_steps_interactive.pm_.c:208
-msgid "More"
-msgstr "Egyéb"
-
-#: ../../Xconfigurator.pm_.c:891 ../../install_gtk.pm_.c:84
-#: ../../install_steps_gtk.pm_.c:328 ../../interactive.pm_.c:127
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:686
-#: ../../my_gtk.pm_.c:1019 ../../my_gtk.pm_.c:1041
-#: ../../standalone/drakbackup_.c:2298 ../../standalone/drakbackup_.c:2369
-#: ../../standalone/drakbackup_.c:2385
-msgid "Ok"
-msgstr "OK"
-
-#: ../../Xconfigurator.pm_.c:893 ../../network/netconnect.pm_.c:169
-#: ../../printerdrake.pm_.c:2470 ../../standalone/draknet_.c:275
-#: ../../standalone/draknet_.c:278
-msgid "Expert Mode"
-msgstr "Szakértői mód"
-
-#: ../../Xconfigurator.pm_.c:894
-msgid "Show all"
-msgstr "Mindent mutasson"
-
-#: ../../Xconfigurator.pm_.c:939
-msgid "Resolutions"
-msgstr "Felbontások"
-
-#: ../../Xconfigurator.pm_.c:1509
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Billentyűzetkiosztás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1510
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Az egér típusa: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1511
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Az egeret kezelő eszköz: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1512
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1513
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "A vízsz. frissítési frekvencia: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1514
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "A függ. frissítési frekvencia: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1515
-#, c-format
-msgid "Graphic card: %s\n"
-msgstr "A grafikus kártya: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1516
-#, c-format
-msgid "Graphic card identification: %s\n"
-msgstr "A grafikus kártya azonosítója: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1517
-#, c-format
-msgid "Graphic memory: %s kB\n"
-msgstr "A kártya memóriája: %s KB\n"
-
-#: ../../Xconfigurator.pm_.c:1519
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Színmélység: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1520
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Felbontás: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1522
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1523
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-meghajtó: %s\n"
-
-#: ../../Xconfigurator.pm_.c:1541
-msgid "Preparing X-Window configuration"
-msgstr "Az X beállításának előkészítése"
-
-#: ../../Xconfigurator.pm_.c:1561
-msgid "What do you want to do?"
-msgstr "Mit szeretne tenni?"
-
-#: ../../Xconfigurator.pm_.c:1566
-msgid "Change Monitor"
-msgstr "A monitor módosítása"
-
-#: ../../Xconfigurator.pm_.c:1567
-msgid "Change Graphic card"
-msgstr "A grafikus kártya módosítása"
-
-#: ../../Xconfigurator.pm_.c:1570
-msgid "Change Server options"
-msgstr "Az X beállításainak módosítása"
-
-#: ../../Xconfigurator.pm_.c:1571
-msgid "Change Resolution"
-msgstr "A felbontás módosítása"
-
-#: ../../Xconfigurator.pm_.c:1572
-msgid "Show information"
-msgstr "Az adatok megjelenítése"
-
-#: ../../Xconfigurator.pm_.c:1573
-msgid "Test again"
-msgstr "Még egy próba"
-
-#: ../../Xconfigurator.pm_.c:1574 ../../printerdrake.pm_.c:2473
-#: ../../standalone/logdrake_.c:225
-msgid "Quit"
-msgstr "Kilépés"
-
-#: ../../Xconfigurator.pm_.c:1582
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"Current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Meg szeretné tartani a módosításokat?\n"
-"A jelenlegi beállítás:\n"
-"\n"
-"%s"
-
-#: ../../Xconfigurator.pm_.c:1603
-msgid "X at startup"
-msgstr "Grafikus módú bejelentkezés"
-
-#: ../../Xconfigurator.pm_.c:1604
-msgid ""
-"I can set up your computer to automatically start X upon booting.\n"
-"Would you like X to start when you reboot?"
-msgstr ""
-"Beállítható, hogy rendszerindításkor az X automatikusan elinduljon.\n"
-"Szeretne grafikus módú bejelentkezést?"
-
-#: ../../Xconfigurator.pm_.c:1610
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr ""
-"A módosítások csak a(z) %s programba való következő bejelentkezéskor lépnek "
-"érvénybe"
-
-#: ../../Xconfigurator.pm_.c:1625
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Jelentkezzen ki, majd nyomja meg a Ctrl+Alt+BackSpace billentyűkombinációt"
-
-#: ../../Xconfigurator_consts.pm_.c:6
-msgid "256 colors (8 bits)"
-msgstr "256 szín (8-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:7
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ezer szín (15-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:8
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ezer szín (16-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:9
-msgid "16 million colors (24 bits)"
-msgstr "16 millió szín (24-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:10
-msgid "4 billion colors (32 bits)"
-msgstr "4 milliárd szín (32-bites)"
-
-#: ../../Xconfigurator_consts.pm_.c:113
-msgid "256 kB"
-msgstr "256 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:114
-msgid "512 kB"
-msgstr "512 KB"
-
-#: ../../Xconfigurator_consts.pm_.c:115
-msgid "1 MB"
-msgstr "1 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:116
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:117
-msgid "4 MB"
-msgstr "4 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:118
-msgid "8 MB"
-msgstr "8 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:119
-msgid "16 MB"
-msgstr "16 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:120
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../Xconfigurator_consts.pm_.c:121
-msgid "64 MB or more"
-msgstr "64 MB vagy több"
-
-#: ../../Xconfigurator_consts.pm_.c:129
-msgid "Standard VGA, 640x480 at 60 Hz"
-msgstr "Standard VGA, 640x480, 60 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:130
-msgid "Super VGA, 800x600 at 56 Hz"
-msgstr "Super VGA, 800x600, 56 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:131
-msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)"
-msgstr "8514-kompatibilis, 1024x768, 87 Hz, váltottsoros (nincs 800x600)"
-
-#: ../../Xconfigurator_consts.pm_.c:132
-msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz"
-msgstr "Super VGA, 1024x768, 87 Hz, váltottsoros, 800x600 56 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:133
-msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz"
-msgstr "Extended Super VGA, 800x600, 60 Hz, 640x480 72 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:134
-msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz"
-msgstr "Nem váltottsoros SVGA, 1024x768, 60 Hz, 800x600 72 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:135
-msgid "High Frequency SVGA, 1024x768 at 70 Hz"
-msgstr "Magas frekvenciájú SVGA, 1024x768, 70 Hz"
-
-#: ../../Xconfigurator_consts.pm_.c:136
-msgid "Multi-frequency that can do 1280x1024 at 60 Hz"
-msgstr "Multisync monitor, amely képes 1280x1024-re 60 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:137
-msgid "Multi-frequency that can do 1280x1024 at 74 Hz"
-msgstr "Multisync monitor, amely képes 1280x1024-re 74 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:138
-msgid "Multi-frequency that can do 1280x1024 at 76 Hz"
-msgstr "Multisync monitor, amely képes 1280x1024-re 76 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:139
-msgid "Monitor that can do 1600x1200 at 70 Hz"
-msgstr "Olyan monitor, amely képes 1600x1200-ra 70 Hz-en"
-
-#: ../../Xconfigurator_consts.pm_.c:140
-msgid "Monitor that can do 1600x1200 at 76 Hz"
-msgstr "Olyan monitor, amely képes 1600x1200-ra 76 Hz-en"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141
-msgid "First sector of boot partition"
-msgstr "A rendszerindítási partíció első szektora"
-
-#: ../../any.pm_.c:116 ../../any.pm_.c:141 ../../any.pm_.c:218
-msgid "First sector of drive (MBR)"
-msgstr "A lemezmeghajtó legelső szektora (MBR)"
-
-#: ../../any.pm_.c:120
-msgid "SILO Installation"
-msgstr "A SILO telepítése"
-
-#: ../../any.pm_.c:121 ../../any.pm_.c:134
-msgid "Where do you want to install the bootloader?"
-msgstr "Hová kerüljön a rendszerindító program (bootloader)?"
-
-#: ../../any.pm_.c:133
-msgid "LILO/grub Installation"
-msgstr "A LILO/GRUB telepítése"
-
-#: ../../any.pm_.c:145 ../../any.pm_.c:159
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../any.pm_.c:147
-msgid "LILO with text menu"
-msgstr "LILO, szöveges menüvel"
-
-#: ../../any.pm_.c:148 ../../any.pm_.c:159
-msgid "LILO with graphical menu"
-msgstr "LILO, grafikus menüvel"
-
-#: ../../any.pm_.c:151
-msgid "Grub"
-msgstr "GRUB"
-
-#: ../../any.pm_.c:155
-msgid "Boot from DOS/Windows (loadlin)"
-msgstr "Indítás DOS-ból vagy Windows-ból (loadlin)"
-
-#: ../../any.pm_.c:157 ../../any.pm_.c:159
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../any.pm_.c:166 ../../any.pm_.c:198
-msgid "Bootloader main options"
-msgstr "Rendszerindítási beállítások"
-
-#: ../../any.pm_.c:167 ../../any.pm_.c:199
-msgid "Bootloader to use"
-msgstr "A használni kívánt rendszerbetöltő"
-
-#: ../../any.pm_.c:169
-msgid "Bootloader installation"
-msgstr "A rendszerindító program telepítése"
-
-#: ../../any.pm_.c:171 ../../any.pm_.c:201
-msgid "Boot device"
-msgstr "Rendszerindítási eszköz"
-
-#: ../../any.pm_.c:172
-msgid "LBA (doesn't work on old BIOSes)"
-msgstr "LBA (nem működik régi BIOS-okkal)"
-
-#: ../../any.pm_.c:173
-msgid "Compact"
-msgstr "Kompakt"
-
-#: ../../any.pm_.c:173
-msgid "compact"
-msgstr "kompakt"
-
-#: ../../any.pm_.c:174 ../../any.pm_.c:298
-msgid "Video mode"
-msgstr "Képernyőmód"
-
-#: ../../any.pm_.c:176
-msgid "Delay before booting default image"
-msgstr "Várakozási idő az alapértelmezett rendszer betöltése előtt"
-
-#: ../../any.pm_.c:178 ../../any.pm_.c:796
-#: ../../install_steps_interactive.pm_.c:1115 ../../network/modem.pm_.c:48
-#: ../../printerdrake.pm_.c:708 ../../printerdrake.pm_.c:806
-#: ../../standalone/draknet_.c:625
-msgid "Password"
-msgstr "Jelszó"
-
-#: ../../any.pm_.c:179 ../../any.pm_.c:797
-#: ../../install_steps_interactive.pm_.c:1116
-msgid "Password (again)"
-msgstr "Jelszó (még egyszer)"
-
-#: ../../any.pm_.c:180
-msgid "Restrict command line options"
-msgstr "A parancssorban átadható paraméterek korlátozása"
-
-#: ../../any.pm_.c:180
-msgid "restrict"
-msgstr "korlátozás"
-
-#: ../../any.pm_.c:182
-msgid "Clean /tmp at each boot"
-msgstr "A /tmp törlése minden újraindulásnál"
-
-#: ../../any.pm_.c:183
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "A RAM mérete, ha szükséges (%d MB-ot detektáltam)"
-
-#: ../../any.pm_.c:185
-msgid "Enable multi profiles"
-msgstr "Több profil engedélyezése"
-
-#: ../../any.pm_.c:189
-msgid "Give the ram size in MB"
-msgstr "A fizikai memória mérete MB-ban"
-
-#: ../../any.pm_.c:191
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"\"A parancssorban átadható paraméterek korlátozása\" beállításnak jelszó "
-"nélkül nincs értelme"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../diskdrake/interactive.pm_.c:1135
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "Please try again"
-msgstr "Próbálja meg újra"
-
-#: ../../any.pm_.c:192 ../../any.pm_.c:773
-#: ../../install_steps_interactive.pm_.c:1110
-msgid "The passwords do not match"
-msgstr "A jelszavak nem egyeznek"
-
-#: ../../any.pm_.c:200
-msgid "Init Message"
-msgstr "Indítási üzenet"
-
-#: ../../any.pm_.c:202
-msgid "Open Firmware Delay"
-msgstr "Késleltetés Open Firmware-nél"
-
-#: ../../any.pm_.c:203
-msgid "Kernel Boot Timeout"
-msgstr "Várakozási idő rendszerindításkor"
-
-#: ../../any.pm_.c:204
-msgid "Enable CD Boot?"
-msgstr "CD-ről történhet rendszerindítás?"
-
-#: ../../any.pm_.c:205
-msgid "Enable OF Boot?"
-msgstr "OF-ről történhet rendszerindítás?"
-
-#: ../../any.pm_.c:206
-msgid "Default OS?"
-msgstr "Az alapértelmezett op. rendszer?"
-
-#: ../../any.pm_.c:240
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Azt a lehetőséget választotta, hogy a rendszerbetöltőt egy partícióra "
-"telepíti.\n"
-"Ez arra utal, hogy már van rendszerbetöltő (például: System Commander) azon "
-"a\n"
-"merevlemezen, amelyről a rendszer indítása történik.\n"
-"\n"
-"Melyik meghajtóról végzi a rendszer indítását?"
-
-#: ../../any.pm_.c:255
-msgid ""
-"Here are the different entries.\n"
-"You can add some more or change the existing ones."
-msgstr ""
-"Itt láthatók a jelenlegi bejegyzések.\n"
-"Új bejegyzések vehetők fel, illetve módosíthatók a meglevők."
-
-#: ../../any.pm_.c:265 ../../standalone/drakbackup_.c:752
-#: ../../standalone/drakbackup_.c:861 ../../standalone/drakfont_.c:789
-#: ../../standalone/drakfont_.c:826
-msgid "Add"
-msgstr "Hozzáadás"
-
-#: ../../any.pm_.c:265 ../../any.pm_.c:784 ../../diskdrake/hd_gtk.pm_.c:153
-#: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:86
-#: ../../interactive_http.pm_.c:153
-msgid "Done"
-msgstr "Kész"
-
-#: ../../any.pm_.c:265
-msgid "Modify"
-msgstr "Módosítás"
-
-#: ../../any.pm_.c:273
-msgid "Which type of entry do you want to add?"
-msgstr "Milyen bejegyzést szeretne felvenni?"
-
-#: ../../any.pm_.c:274 ../../standalone/drakbackup_.c:895
-msgid "Linux"
-msgstr "Linux"
-
-#: ../../any.pm_.c:274
-msgid "Other OS (SunOS...)"
-msgstr "Egyéb op. rendszer (SunOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (MacOS...)"
-msgstr "Egyéb op. rendszer (MacOS...)"
-
-#: ../../any.pm_.c:275
-msgid "Other OS (windows...)"
-msgstr "Egyéb op. rendszer (Windows...)"
-
-#: ../../any.pm_.c:294
-msgid "Image"
-msgstr "Indítófájl"
-
-#: ../../any.pm_.c:295 ../../any.pm_.c:306
-msgid "Root"
-msgstr "Gyökér"
-
-#: ../../any.pm_.c:296 ../../any.pm_.c:325
-msgid "Append"
-msgstr "Hozzáfűzés"
-
-#: ../../any.pm_.c:300
-msgid "Initrd"
-msgstr "Kezdeti RAM-diszk"
-
-#: ../../any.pm_.c:301
-msgid "Read-write"
-msgstr "Írható-olvasható"
-
-#: ../../any.pm_.c:308
-msgid "Table"
-msgstr "Tábla"
-
-#: ../../any.pm_.c:309
-msgid "Unsafe"
-msgstr "Nem biztonságos"
-
-#: ../../any.pm_.c:316 ../../any.pm_.c:321 ../../any.pm_.c:324
-msgid "Label"
-msgstr "Címke"
-
-#: ../../any.pm_.c:318 ../../any.pm_.c:329
-msgid "Default"
-msgstr "Alapértelmezés"
-
-#: ../../any.pm_.c:326
-msgid "Initrd-size"
-msgstr "A RAM-diszk mérete"
-
-#: ../../any.pm_.c:328
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm_.c:336
-msgid "Remove entry"
-msgstr "Bejegyzés eltávolítása"
-
-#: ../../any.pm_.c:339
-msgid "Empty label not allowed"
-msgstr "A címke nem lehet üres"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a kernel image"
-msgstr "Meg kell adni egy kernelfájlt"
-
-#: ../../any.pm_.c:340
-msgid "You must specify a root partition"
-msgstr "Meg kell adni egy gyökérpartíciót"
-
-#: ../../any.pm_.c:341
-msgid "This label is already used"
-msgstr "Már van ilyen nevű címke"
-
-#: ../../any.pm_.c:656
-#, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s csatolót találtam"
-
-#: ../../any.pm_.c:657
-msgid "Do you have another one?"
-msgstr "Van még másik is?"
-
-#: ../../any.pm_.c:658
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Van valamilyen %s csatoló?"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:832 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "No"
-msgstr "Nem"
-
-#: ../../any.pm_.c:660 ../../any.pm_.c:831 ../../interactive.pm_.c:132
-#: ../../my_gtk.pm_.c:1018
-msgid "Yes"
-msgstr "Igen"
-
-#: ../../any.pm_.c:661
-msgid "See hardware info"
-msgstr "A hardverjellemzők megjelenítése"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../any.pm_.c:695
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Meghajtóprogram telepítése ehhez a(z) %s-kártyához: %s"
-
-#: ../../any.pm_.c:696
-#, c-format
-msgid "(module %s)"
-msgstr "(%s modul)"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../any.pm_.c:707
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Melyik %s-meghajtóprogramot próbáljam meg?"
-
-#: ../../any.pm_.c:715
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bizonyos esetekben a(z) %s meghajtóprogramnak további paraméterekre van\n"
-"szüksége a helyes működéshez. Szeretne további paramétereket megadni a\n"
-"meghajtóprogramnak, vagy hagyja, hogy az lekérdezze a szükséges\n"
-"információkat? Bizonyos körülmények esetén az automatikus detektálás\n"
-"a gép lefagyásához vezethet, de komolyabb kárt nem okozhat."
-
-#: ../../any.pm_.c:720
-msgid "Autoprobe"
-msgstr "Automatikus detektálás"
-
-#: ../../any.pm_.c:720
-msgid "Specify options"
-msgstr "Paraméterek megadása"
-
-#: ../../any.pm_.c:725
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Most megadhatók a(z) \"%s\" modul paraméterei.\n"
-"A címeket \"0x\" előtaggal kell megadni, például: \"0x123\"."
-
-#: ../../any.pm_.c:731
-#, c-format
-msgid ""
-"You may now provide its options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Itt lehet megadni a(z) %s modul paramétereit\n"
-"a következő formátumban: \"név1=érték1 név2=érték2 ...\".\n"
-"Például: \"io=0x300 irq=7\""
-
-#: ../../any.pm_.c:734
-msgid "Module options:"
-msgstr "A modul paraméterei:"
-
-#: ../../any.pm_.c:745
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"A(z) %s modul betöltése nem sikerült.\n"
-"Megpróbálja a betöltést más paraméterekkel?"
-
-#: ../../any.pm_.c:761
-msgid "access to X programs"
-msgstr "hozzáférés az X-es programokhoz"
-
-#: ../../any.pm_.c:762
-msgid "access to rpm tools"
-msgstr "hozzáférés az RPM-eszközökhöz"
-
-#: ../../any.pm_.c:763
-msgid "allow \"su\""
-msgstr "\"su\" engedélyezése"
-
-#: ../../any.pm_.c:764
-msgid "access to administrative files"
-msgstr "hozzáférés az adminisztrációs fájlokhoz"
-
-#: ../../any.pm_.c:769
-#, c-format
-msgid "(already added %s)"
-msgstr "(már fel van véve: %s)"
-
-#: ../../any.pm_.c:774
-msgid "This password is too simple"
-msgstr "Ez a jelszó túl egyszerű"
-
-#: ../../any.pm_.c:775
-msgid "Please give a user name"
-msgstr "Adjon meg egy felhasználónevet"
-
-#: ../../any.pm_.c:776
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"A felhasználónév csak a következőket tartalmazhatja: kisbetűk, számok, \"-\" "
-"és \"_\""
-
-#: ../../any.pm_.c:777
-msgid "This user name is already added"
-msgstr "Már létezik ilyen felhasználónév"
-
-#: ../../any.pm_.c:781
-msgid "Add user"
-msgstr "Felhasználó hozzáadása"
-
-#: ../../any.pm_.c:782
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Adjon meg egy felhasználónevet\n"
-"%s"
-
-#: ../../any.pm_.c:783
-msgid "Accept user"
-msgstr "Név elfogadása"
-
-#: ../../any.pm_.c:794
-msgid "Real name"
-msgstr "Valódi név"
-
-#: ../../any.pm_.c:795 ../../printerdrake.pm_.c:707
-#: ../../printerdrake.pm_.c:805
-msgid "User name"
-msgstr "Felhasználónév"
-
-#: ../../any.pm_.c:798
-msgid "Shell"
-msgstr "Parancsértelmező"
-
-#: ../../any.pm_.c:800
-msgid "Icon"
-msgstr "Ikon"
-
-#: ../../any.pm_.c:828
-msgid "Autologin"
-msgstr "Automatikus bejelentkezés"
-
-#: ../../any.pm_.c:829
-msgid ""
-"I can set up your computer to automatically log on one user.\n"
-"Do you want to use this feature?"
-msgstr ""
-"Beállítható, hogy indításkor egy felhasználó automatikusan bejelentkezzen.\n"
-"Szeretné használni ezt a lehetőséget?"
-
-#: ../../any.pm_.c:833
-msgid "Choose the default user:"
-msgstr "Adja meg az alapértelmezett felhasználónevet:"
-
-#: ../../any.pm_.c:834
-msgid "Choose the window manager to run:"
-msgstr "Válassza ki a használni kívánt ablakkezelőt:"
-
-#: ../../any.pm_.c:849
-msgid "Please choose a language to use."
-msgstr "Válasszon nyelvet."
-
-#: ../../any.pm_.c:851
-msgid "You can choose other languages that will be available after install"
-msgstr "Választhat más nyelveket is, ezek a telepítés után lesznek elérhetők."
-
-#: ../../any.pm_.c:863 ../../install_steps_interactive.pm_.c:719
-#: ../../standalone/drakxtv_.c:54
-msgid "All"
-msgstr "Mind"
-
-#: ../../any.pm_.c:955
-msgid "Allow all users"
-msgstr "Az összes felhasználó engedélyezése"
-
-#: ../../any.pm_.c:955 ../../install_steps_interactive.pm_.c:521
-msgid "Custom"
-msgstr "Egyéni"
-
-#: ../../any.pm_.c:955
-msgid "No sharing"
-msgstr "Nincs megosztás"
-
-#: ../../any.pm_.c:965 ../../network/smbnfs.pm_.c:45
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "A(z) %s csomagot telepíteni kell. Szeretné telepíteni?"
-
-#: ../../any.pm_.c:968
-msgid "You can export using NFS or Samba. Which one do you want"
-msgstr ""
-"Exportálás NFS-sel vagy Sambával végezhető. Melyiket kívánja használni?"
-
-#: ../../any.pm_.c:976 ../../network/smbnfs.pm_.c:49
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Hiányzik a(z) \"%s\" nevű kötelező csomag"
-
-#: ../../any.pm_.c:982
-msgid ""
-"Do you want to allow users to export some directories in their home?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Szeretné engedélyezni a felhasználók számára azt, hogy a saját "
-"könyvtárukban\n"
-"levő könyvtárakat exportáljanak?\n"
-"Ha ez engedélyezve van, akkor a felhasználók a Konquerorban és a "
-"Nautilusban\n"
-"a \"Megosztás\" funkcióval végezhetnek exportálást.\n"
-"\n"
-"Az \"Egyéni\" opció használatával felhasználónkénti beállítás lehetséges.\n"
-
-#: ../../any.pm_.c:996 ../../bootlook.pm_.c:161
-#: ../../diskdrake/smbnfs_gtk.pm_.c:85 ../../install_steps_gtk.pm_.c:464
-#: ../../install_steps_gtk.pm_.c:522 ../../install_steps_interactive.pm_.c:594
-#: ../../interactive.pm_.c:142 ../../interactive.pm_.c:317
-#: ../../interactive.pm_.c:349 ../../interactive_stdio.pm_.c:141
-#: ../../my_gtk.pm_.c:687 ../../my_gtk.pm_.c:690 ../../my_gtk.pm_.c:1019
-#: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1586
-#: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:2264
-#: ../../standalone/drakbackup_.c:2289 ../../standalone/drakbackup_.c:2310
-#: ../../standalone/drakbackup_.c:2331 ../../standalone/drakbackup_.c:2349
-#: ../../standalone/drakbackup_.c:2397 ../../standalone/drakbackup_.c:2417
-#: ../../standalone/drakbackup_.c:2436 ../../standalone/drakfont_.c:767
-#: ../../standalone/drakgw_.c:721 ../../standalone/draknet_.c:116
-#: ../../standalone/draknet_.c:148 ../../standalone/draknet_.c:290
-#: ../../standalone/draknet_.c:538 ../../standalone/draknet_.c:680
-#: ../../standalone/logdrake_.c:225 ../../standalone/logdrake_.c:512
-#: ../../standalone/tinyfirewall_.c:65
-msgid "Cancel"
-msgstr "Mégsem"
-
-#: ../../any.pm_.c:996
-msgid "Launch userdrake"
-msgstr "UserDrake indítása"
-
-#: ../../any.pm_.c:998
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user in this group."
-msgstr ""
-"A felhasználónkénti megosztás a \"fileshare\" csoportot használja.\n"
-"A UserDrake programmal lehet felhasználót felvenni ebbe a csoportba."
-
-#: ../../any.pm_.c:1035
-msgid "Welcome To Crackers"
-msgstr "Üdvözlet a cracker-eknek"
-
-#: ../../any.pm_.c:1036
-msgid "Poor"
-msgstr "Gyenge"
-
-#: ../../any.pm_.c:1037 ../../mouse.pm_.c:31
-msgid "Standard"
-msgstr "Szabványos"
-
-#: ../../any.pm_.c:1038
-msgid "High"
-msgstr "Magas"
-
-#: ../../any.pm_.c:1039
-msgid "Higher"
-msgstr "Magasabb"
-
-#: ../../any.pm_.c:1040
-msgid "Paranoid"
-msgstr "Paranoiás"
-
-#: ../../any.pm_.c:1043
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive: it must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ezt a szintet csak körültekintéssel használja.\n"
-"Egyszerűbbé teszi a rendszer használatát, de így az sebezhetőbb is lesz:\n"
-"ne válassza ezt a szintet, ha a gép hálózatba van kötve, vagy az "
-"internethez\n"
-"csatlakozik. A hozzáférés nincs jelszóval védve."
-
-#: ../../any.pm_.c:1046
-msgid ""
-"Password are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"A jelszavak be vannak kapcsolva, de hálózatra kapcsolódó gép esetén\n"
-"ez a konfiguráció még mindig nem ajánlott."
-
-#: ../../any.pm_.c:1047
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ez a szabványos biztonsági szint, amely az internetre (kliensként) "
-"csatlakozó gépek esetén javasolt."
-
-#: ../../any.pm_.c:1048
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Már vannak bizonyos megszorítások, és több automatikus ellenőrzés fut "
-"éjszakánként."
-
-#: ../../any.pm_.c:1049
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should better choose a lower level."
-msgstr ""
-"Ezzel a biztonsági szinttel már használhatja a gépét kiszolgálóként.\n"
-"Ez a biztonsági szint elég magas ahhoz, hogy a rendszer sok, hálózaton\n"
-"keresztül csatlakozó klienst szolgáljon ki. Ha a gép az interneten csak "
-"kliensként van jelen, akkor érdemesebb egy alacsonyabb szintet választani."
-
-#: ../../any.pm_.c:1052
-msgid ""
-"Based on the previous level, but the system is entirely closed.\n"
-"Security features are at their maximum."
-msgstr ""
-"Az előző szinten alapul, de itt a rendszer teljesen zárt.\n"
-"Ez a legbiztonságosabb szint."
-
-#: ../../any.pm_.c:1058
-msgid "Choose security level"
-msgstr "Válassza ki a biztonsági szintet"
-
-#: ../../any.pm_.c:1061
-msgid "Security level"
-msgstr "Biztonsági szint"
-
-#: ../../any.pm_.c:1063
-msgid "Use libsafe for servers"
-msgstr "A libsafe használata kiszolgálókhoz"
-
-#: ../../any.pm_.c:1064
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Könyvtár, amely védelmet nyújt a puffertúlcsordulásos és a formátumsztringes "
-"támadások ellen."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm_.c:355
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system in the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"Udvozoljuk a(z) %s rendszerinditoban!\n"
-"\n"
-"Valasszon egy operacios rendszert a listabol, vagy varjon\n"
-"%d masodpercig, amig az alapertelmezett elindul.\n"
-"\n"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:928
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Udvozoljuk a GRUB rendszerindito programban!"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:931
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "A(z) %c es a(z) %c billentyukkel lehet a bejegyzesek kozott lepegetni."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:934
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr ""
-"Nyomja meg az Enter billentyut a kijelolt rendszer inditasahoz, az 'e'-t "
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:937
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "az inditasi parancsok modositasahoz, vagy a 'c'-t a parancssorhoz."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm_.c:940
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "A kijelolt operacios rendszer %d masodperc mulva elindul."
-
-#: ../../bootloader.pm_.c:944
-msgid "not enough room in /boot"
-msgstr "nincs elég hely a /boot partíción"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
-#: ../../bootloader.pm_.c:1044
-msgid "Desktop"
-msgstr "Asztal"
-
-#. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#: ../../bootloader.pm_.c:1046
-msgid "Start Menu"
-msgstr "Start menü"
-
-#: ../../bootloader.pm_.c:1065
-#, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "A rendszerindító program nem tehető %s partícióra\n"
-
-#: ../../bootlook.pm_.c:46
-msgid "no help implemented yet.\n"
-msgstr "még nem használható a segítség\n"
-
-#: ../../bootlook.pm_.c:62
-msgid "Boot Style Configuration"
-msgstr "A rendszerindítás beállításai"
-
-#: ../../bootlook.pm_.c:79 ../../standalone/logdrake_.c:101
-msgid "/_File"
-msgstr "/_Fájl"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "/File/_Quit"
-msgstr "/Fájl/Ki_lépés"
-
-#: ../../bootlook.pm_.c:80 ../../standalone/logdrake_.c:107
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: ../../bootlook.pm_.c:91
-msgid "NewStyle Categorizing Monitor"
-msgstr "Új stílusú kategorizáló monitor"
-
-#: ../../bootlook.pm_.c:92
-msgid "NewStyle Monitor"
-msgstr "Új stílusú monitor"
-
-#: ../../bootlook.pm_.c:93
-msgid "Traditional Monitor"
-msgstr "Hagyományos monitor"
-
-#: ../../bootlook.pm_.c:94
-msgid "Traditional Gtk+ Monitor"
-msgstr "Hagyományos GTK+-monitor"
-
-#: ../../bootlook.pm_.c:95
-msgid "Launch Aurora at boot time"
-msgstr "Az Aurora indítása rendszerindításkor"
-
-#: ../../bootlook.pm_.c:98
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB mód"
-
-#: ../../bootlook.pm_.c:98
-msgid "Yaboot mode"
-msgstr "Yaboot mód"
-
-#: ../../bootlook.pm_.c:104
-#, c-format
-msgid ""
-"You are currently using %s as Boot Manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"Jelenleg a(z) %s rendszerindító programot használja.\n"
-"Kattintson a Beállítás gombra a beállításvarázsló elindításához."
-
-#: ../../bootlook.pm_.c:106 ../../standalone/drakbackup_.c:1467
-#: ../../standalone/drakbackup_.c:1478 ../../standalone/drakgw_.c:715
-#: ../../standalone/tinyfirewall_.c:59
-msgid "Configure"
-msgstr "Beállítás"
-
-#: ../../bootlook.pm_.c:141
-msgid "System mode"
-msgstr "Rendszer-mód"
-
-#: ../../bootlook.pm_.c:143
-msgid "Launch the X-Window system at start"
-msgstr "Az X induljon el rendszerindításkor"
-
-#: ../../bootlook.pm_.c:148
-msgid "No, I don't want autologin"
-msgstr "Ne legyen automatikus bejelentkezés"
-
-#: ../../bootlook.pm_.c:150
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Legyen automatikus bejelentkezés (felhasználónév, grafikus környezet)"
-
-#: ../../bootlook.pm_.c:160 ../../network/netconnect.pm_.c:102
-#: ../../standalone/drakbackup_.c:2441 ../../standalone/drakbackup_.c:3345
-#: ../../standalone/drakfont_.c:532 ../../standalone/drakfont_.c:655
-#: ../../standalone/drakfont_.c:719 ../../standalone/drakfont_.c:765
-#: ../../standalone/draknet_.c:109 ../../standalone/draknet_.c:141
-#: ../../standalone/draknet_.c:297 ../../standalone/draknet_.c:436
-#: ../../standalone/draknet_.c:522 ../../standalone/draknet_.c:565
-#: ../../standalone/draknet_.c:666 ../../standalone/logdrake_.c:505
-msgid "OK"
-msgstr "OK"
-
-#: ../../bootlook.pm_.c:229
-#, c-format
-msgid "can not open /etc/inittab for reading: %s"
-msgstr "Az /etc/inittab fájlt nem sikerült olvasásra megnyitni: %s"
-
-#: ../../common.pm_.c:94
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm_.c:94
-msgid "KB"
-msgstr "KB"
-
-#: ../../common.pm_.c:94
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm_.c:102
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm_.c:110
-#, c-format
-msgid "%d minutes"
-msgstr "%d perc"
-
-#: ../../common.pm_.c:112
-msgid "1 minute"
-msgstr "1 perc"
-
-#: ../../common.pm_.c:114
-#, c-format
-msgid "%d seconds"
-msgstr "%d másodperc"
-
-#: ../../common.pm_.c:159
-msgid "Can't make screenshots before partitioning"
-msgstr "Partícionálás előtt nem készíthetők képernyőfelvételek"
-
-#: ../../common.pm_.c:166
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "A képernyőfelvételek a telepítés után itt lesznek elérhetők: %s"
-
-#: ../../crypto.pm_.c:12 ../../crypto.pm_.c:26 ../../standalone/drakxtv_.c:50
-msgid "France"
-msgstr "Franciaország"
-
-#: ../../crypto.pm_.c:13
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: ../../crypto.pm_.c:14 ../../crypto.pm_.c:27
-msgid "Belgium"
-msgstr "Belgium"
-
-#: ../../crypto.pm_.c:15 ../../crypto.pm_.c:28
-msgid "Czech Republic"
-msgstr "Cseh Köztársaság"
-
-#: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29
-msgid "Germany"
-msgstr "Németország"
-
-#: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30
-msgid "Greece"
-msgstr "Görögország"
-
-#: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31
-msgid "Norway"
-msgstr "Norvégia"
-
-#: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32
-msgid "Sweden"
-msgstr "Svédország"
-
-#: ../../crypto.pm_.c:20 ../../crypto.pm_.c:34
-msgid "Netherlands"
-msgstr "Hollandia"
-
-#: ../../crypto.pm_.c:21 ../../crypto.pm_.c:35 ../../standalone/drakxtv_.c:50
-msgid "Italy"
-msgstr "Olaszország"
-
-#: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36
-msgid "Austria"
-msgstr "Ausztria"
-
-#: ../../crypto.pm_.c:33 ../../crypto.pm_.c:67
-msgid "United States"
-msgstr "Amerikai Egyesült Államok"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94
-msgid "Please make a backup of your data first"
-msgstr "Először készítsen biztonsági mentést az adatokról"
-
-#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:891
-#: ../../diskdrake/interactive.pm_.c:900 ../../diskdrake/interactive.pm_.c:954
-msgid "Read carefully!"
-msgstr "Olvassa el figyelmesen!"
-
-#: ../../diskdrake/hd_gtk.pm_.c:97
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ha az aboot-ot fogja használni, először ellenőrizze, hogy maradt-e elég\n"
-"hely (legalább 2048 szektor) a lemez elején"
-
-#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:325
-#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/smbnfs_gtk.pm_.c:45
-#: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:356 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
-msgid "Error"
-msgstr "Hiba"
-
-#: ../../diskdrake/hd_gtk.pm_.c:151
-msgid "Wizard"
-msgstr "Varázsló"
-
-#: ../../diskdrake/hd_gtk.pm_.c:181 ../../diskdrake/removable_gtk.pm_.c:24
-msgid "Choose action"
-msgstr "Válasszon"
-
-#: ../../diskdrake/hd_gtk.pm_.c:185
-msgid ""
-"You have one big FAT partition\n"
-"(generally used by MicroSoft Dos/Windows).\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Egy nagy FAT partíció van\n"
-"(ez gyakran egy Microsoft DOS/Windows partíció).\n"
-"Célszerű először átméretezni a partíciót\n"
-"(kattintson a partícióra, majd az \"Átméretezés\" gombra)."
-
-#: ../../diskdrake/hd_gtk.pm_.c:188
-msgid "Please click on a partition"
-msgstr "Kattintson egy partícióra"
-
-#: ../../diskdrake/hd_gtk.pm_.c:202 ../../diskdrake/smbnfs_gtk.pm_.c:67
-#: ../../install_steps_gtk.pm_.c:523
-msgid "Details"
-msgstr "Részletek"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "FAT"
-msgstr "FAT"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "HFS"
-msgstr "HFS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Journalised FS"
-msgstr "Naplózott fájlrendszer"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "SunOS"
-msgstr "SunOS"
-
-#: ../../diskdrake/hd_gtk.pm_.c:320
-msgid "Swap"
-msgstr "Lapozóterület (swap)"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../diskdrake/interactive.pm_.c:1050
-msgid "Empty"
-msgstr "Üres"
-
-#: ../../diskdrake/hd_gtk.pm_.c:321 ../../install_steps_gtk.pm_.c:379
-#: ../../install_steps_gtk.pm_.c:439 ../../mouse.pm_.c:162
-#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:944
-msgid "Other"
-msgstr "Egyéb"
-
-#: ../../diskdrake/hd_gtk.pm_.c:325
-msgid "Filesystem types:"
-msgstr "Fájlrendszer-típusok:"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:386
-msgid "Create"
-msgstr "Létrehozás"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/interactive.pm_.c:365
-#: ../../diskdrake/interactive.pm_.c:499 ../../diskdrake/removable.pm_.c:26
-#: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17
-msgid "Type"
-msgstr "Típus"
-
-#: ../../diskdrake/hd_gtk.pm_.c:342 ../../diskdrake/hd_gtk.pm_.c:344
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Használja inkább ezt: \"%s\""
-
-#: ../../diskdrake/hd_gtk.pm_.c:344 ../../diskdrake/interactive.pm_.c:374
-msgid "Delete"
-msgstr "Törlés"
-
-#: ../../diskdrake/hd_gtk.pm_.c:348
-msgid "Use ``Unmount'' first"
-msgstr "Használja először a \"Leválasztás\"-t"
-
-#: ../../diskdrake/hd_gtk.pm_.c:349 ../../diskdrake/interactive.pm_.c:491
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"A(z) %s partíció típusának módosítása után a partíción levő adatok elvesznek"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose a partition"
-msgstr "Válasszon egy partíciót"
-
-#: ../../diskdrake/interactive.pm_.c:171
-msgid "Choose another partition"
-msgstr "Válasszon egy másik partíciót"
-
-#: ../../diskdrake/interactive.pm_.c:196
-msgid "Exit"
-msgstr "Kilépés"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to expert mode"
-msgstr "Átváltás szakértői módba"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Toggle to normal mode"
-msgstr "Átváltás normál módba"
-
-#: ../../diskdrake/interactive.pm_.c:218
-msgid "Undo"
-msgstr "Visszavonás"
-
-#: ../../diskdrake/interactive.pm_.c:237
-msgid "Continue anyway?"
-msgstr "Folytassam a műveletet?"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without saving"
-msgstr "Kilépés mentés nélkül"
-
-#: ../../diskdrake/interactive.pm_.c:242
-msgid "Quit without writing the partition table?"
-msgstr "Ki akar lépni a programból a partíciós tábla mentése nélkül?"
-
-#: ../../diskdrake/interactive.pm_.c:247
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "El szeretné menteni az /etc/fstab fájlban végrehajtott módosításokat?"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Auto allocate"
-msgstr "Automatikus helyfoglalás"
-
-#: ../../diskdrake/interactive.pm_.c:259
-msgid "Clear all"
-msgstr "Teljes törlés"
-
-#: ../../diskdrake/interactive.pm_.c:262
-msgid "Hard drive information"
-msgstr "Merevlemez-jellemzők"
-
-#: ../../diskdrake/interactive.pm_.c:283
-msgid "All primary partitions are used"
-msgstr "Mindegyik elsődleges partíció foglalt"
-
-#: ../../diskdrake/interactive.pm_.c:284
-msgid "I can't add any more partition"
-msgstr "Nem hozható létre több partíció"
-
-#: ../../diskdrake/interactive.pm_.c:285
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"További partíciók létrehozásához törölni kell egyet (hogy egy kiterjesztett "
-"partíciót létre lehessen hozni)"
-
-#: ../../diskdrake/interactive.pm_.c:295
-msgid "Save partition table"
-msgstr "A partíciós tábla mentése"
-
-#: ../../diskdrake/interactive.pm_.c:296
-msgid "Restore partition table"
-msgstr "A partíciós tábla visszatöltése"
-
-#: ../../diskdrake/interactive.pm_.c:297
-msgid "Rescue partition table"
-msgstr "A partíciós tábla helyreállítása"
-
-#: ../../diskdrake/interactive.pm_.c:299
-msgid "Reload partition table"
-msgstr "A partíciós tábla újratöltése"
-
-#: ../../diskdrake/interactive.pm_.c:304
-msgid "Removable media automounting"
-msgstr "Cserélhető lemez automatikus csatlakoztatása"
-
-#: ../../diskdrake/interactive.pm_.c:313 ../../diskdrake/interactive.pm_.c:333
-msgid "Select file"
-msgstr "Fájlválasztás"
-
-#: ../../diskdrake/interactive.pm_.c:320
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"A partíciós tábla két példányának mérete eltér!\n"
-"Folytassam a műveletet?"
-
-#: ../../diskdrake/interactive.pm_.c:334
-msgid "Warning"
-msgstr "Figyelmeztetés"
-
-#: ../../diskdrake/interactive.pm_.c:335
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Helyezzen be egy floppylemezt a meghajtóba!\n"
-"A lemezen található adatok elvesznek"
-
-#: ../../diskdrake/interactive.pm_.c:346
-msgid "Trying to rescue partition table"
-msgstr "Megpróbálom helyrehozni a partíciós táblát"
-
-#: ../../diskdrake/interactive.pm_.c:352
-msgid "Detailed information"
-msgstr "Részletes információ"
-
-#: ../../diskdrake/interactive.pm_.c:364 ../../diskdrake/interactive.pm_.c:534
-#: ../../diskdrake/interactive.pm_.c:554 ../../diskdrake/removable.pm_.c:24
-#: ../../diskdrake/removable_gtk.pm_.c:15 ../../diskdrake/smbnfs_gtk.pm_.c:83
-msgid "Mount point"
-msgstr "Csatlakoztatási pont"
-
-#: ../../diskdrake/interactive.pm_.c:366 ../../diskdrake/removable.pm_.c:25
-#: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:84
-msgid "Options"
-msgstr "Beállítások"
-
-#: ../../diskdrake/interactive.pm_.c:367 ../../diskdrake/interactive.pm_.c:621
-msgid "Resize"
-msgstr "Átméretezés"
-
-#: ../../diskdrake/interactive.pm_.c:368 ../../diskdrake/interactive.pm_.c:674
-msgid "Move"
-msgstr "Áthelyezés"
-
-#: ../../diskdrake/interactive.pm_.c:369
-msgid "Format"
-msgstr "Formázás"
-
-#: ../../diskdrake/interactive.pm_.c:370 ../../diskdrake/smbnfs_gtk.pm_.c:80
-msgid "Mount"
-msgstr "Csatlakoztatás"
-
-#: ../../diskdrake/interactive.pm_.c:371
-msgid "Add to RAID"
-msgstr "Hozzáadás RAID-hez"
-
-#: ../../diskdrake/interactive.pm_.c:372
-msgid "Add to LVM"
-msgstr "Hozzáadás LVM-hez"
-
-#: ../../diskdrake/interactive.pm_.c:373 ../../diskdrake/smbnfs_gtk.pm_.c:79
-msgid "Unmount"
-msgstr "Leválasztás"
-
-#: ../../diskdrake/interactive.pm_.c:375
-msgid "Remove from RAID"
-msgstr "Eltávolítás RAID-ből"
-
-#: ../../diskdrake/interactive.pm_.c:376
-msgid "Remove from LVM"
-msgstr "Eltávolítás LVM-ből"
-
-#: ../../diskdrake/interactive.pm_.c:377
-msgid "Modify RAID"
-msgstr "RAID módosítása"
-
-#: ../../diskdrake/interactive.pm_.c:378
-msgid "Use for loopback"
-msgstr "Loopback-hez használva"
-
-#: ../../diskdrake/interactive.pm_.c:417
-msgid "Create a new partition"
-msgstr "Új partíció létrehozása"
-
-#: ../../diskdrake/interactive.pm_.c:420
-msgid "Start sector: "
-msgstr "Kezdőszektor: "
-
-#: ../../diskdrake/interactive.pm_.c:422 ../../diskdrake/interactive.pm_.c:773
-msgid "Size in MB: "
-msgstr "Méret (MB): "
-
-#: ../../diskdrake/interactive.pm_.c:423 ../../diskdrake/interactive.pm_.c:774
-msgid "Filesystem type: "
-msgstr "A fájlrendszer típusa: "
-
-#: ../../diskdrake/interactive.pm_.c:424
-#: ../../diskdrake/interactive.pm_.c:1034
-#: ../../diskdrake/interactive.pm_.c:1108
-msgid "Mount point: "
-msgstr "Csatlakoztatási pont: "
-
-#: ../../diskdrake/interactive.pm_.c:428
-msgid "Preference: "
-msgstr "Beállítások: "
-
-#: ../../diskdrake/interactive.pm_.c:472
-msgid "Remove the loopback file?"
-msgstr "El szeretné távolítani a loopback fájlt?"
-
-#: ../../diskdrake/interactive.pm_.c:497
-msgid "Change partition type"
-msgstr "A partíciótípus megváltoztatása"
-
-#: ../../diskdrake/interactive.pm_.c:498 ../../diskdrake/removable.pm_.c:48
-msgid "Which filesystem do you want?"
-msgstr "Melyik fájlrendszert szeretné?"
-
-#: ../../diskdrake/interactive.pm_.c:502
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertálás Ext2-ről Ext3-ra"
-
-#: ../../diskdrake/interactive.pm_.c:532
-#, c-format
-msgid "Where do you want to mount loopback file %s?"
-msgstr "Hová szeretné csatlakoztatni a(z) %s loopback fájlt?"
-
-#: ../../diskdrake/interactive.pm_.c:533 ../../diskdrake/interactive.pm_.c:553
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hová szeretné csatlakoztatni a(z) %s eszközt?"
-
-#: ../../diskdrake/interactive.pm_.c:539
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nem lehet megszüntetni a csatlakoztatási pontot, mert ez egy loopback\n"
-"partíció. Először távolítsa el a loopback-et."
-
-#: ../../diskdrake/interactive.pm_.c:577
-msgid "Computing FAT filesystem bounds"
-msgstr "A FAT fájlrendszer jellemzőinek kiszámítása"
-
-#: ../../diskdrake/interactive.pm_.c:577 ../../diskdrake/interactive.pm_.c:636
-#: ../../install_interactive.pm_.c:130
-msgid "Resizing"
-msgstr "Átméretezés"
-
-#: ../../diskdrake/interactive.pm_.c:609
-msgid "This partition is not resizeable"
-msgstr "Ezt a partíciót nem lehet átméretezni"
-
-#: ../../diskdrake/interactive.pm_.c:614
-msgid "All data on this partition should be backed-up"
-msgstr "Készítsen biztonsági mentést erről a partícióról"
-
-#: ../../diskdrake/interactive.pm_.c:616
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"A(z) %s partíció átméretezésekor a partíción található adatok elvesznek"
-
-#: ../../diskdrake/interactive.pm_.c:621
-msgid "Choose the new size"
-msgstr "Adja meg az új méretet"
-
-#: ../../diskdrake/interactive.pm_.c:622
-msgid "New size in MB: "
-msgstr "Az új méret (MB-ban): "
-
-#: ../../diskdrake/interactive.pm_.c:675
-msgid "Which disk do you want to move it to?"
-msgstr "Melyik lemezre szeretné áthelyezni?"
-
-#: ../../diskdrake/interactive.pm_.c:676
-msgid "Sector"
-msgstr "Szektor"
-
-#: ../../diskdrake/interactive.pm_.c:677
-msgid "Which sector do you want to move it to?"
-msgstr "Melyik szektorra szeretné áthelyezni?"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving"
-msgstr "Áthelyezés"
-
-#: ../../diskdrake/interactive.pm_.c:680
-msgid "Moving partition..."
-msgstr "Partíció áthelyezése..."
-
-#: ../../diskdrake/interactive.pm_.c:697
-msgid "Choose an existing RAID to add to"
-msgstr "Válassza ki azt a RAID-et, amelyikhez hozzá szeretné adni a lemezt"
-
-#: ../../diskdrake/interactive.pm_.c:698 ../../diskdrake/interactive.pm_.c:716
-msgid "new"
-msgstr "új"
-
-#: ../../diskdrake/interactive.pm_.c:714
-msgid "Choose an existing LVM to add to"
-msgstr "Válassza ki azt az LVM-et, amelyhez hozzá szeretné adni a lemezt"
-
-#: ../../diskdrake/interactive.pm_.c:719
-msgid "LVM name?"
-msgstr "Az LVM neve?"
-
-#: ../../diskdrake/interactive.pm_.c:759
-msgid "This partition can't be used for loopback"
-msgstr "Ez a partíció nem használható loopback-hez"
-
-#: ../../diskdrake/interactive.pm_.c:771
-msgid "Loopback"
-msgstr "Loopback"
-
-#: ../../diskdrake/interactive.pm_.c:772
-msgid "Loopback file name: "
-msgstr "A loopback fájl neve: "
-
-#: ../../diskdrake/interactive.pm_.c:777
-msgid "Give a file name"
-msgstr "Adjon meg egy fájlnevet"
-
-#: ../../diskdrake/interactive.pm_.c:780
-msgid "File already used by another loopback, choose another one"
-msgstr ""
-"Ez a fájl már egy másik loopback-hez van rendelve, válasszon egy másikat"
-
-#: ../../diskdrake/interactive.pm_.c:781
-msgid "File already exists. Use it?"
-msgstr "A fájl már létezik, használjam?"
-
-#: ../../diskdrake/interactive.pm_.c:804
-msgid "Mount options"
-msgstr "Csatlakoztatási (mount) opciók"
-
-#: ../../diskdrake/interactive.pm_.c:811
-msgid "Various"
-msgstr "Vegyes"
-
-#: ../../diskdrake/interactive.pm_.c:874
-msgid "device"
-msgstr "eszköz"
-
-#: ../../diskdrake/interactive.pm_.c:875
-msgid "level"
-msgstr "szint"
-
-#: ../../diskdrake/interactive.pm_.c:876
-msgid "chunk size"
-msgstr "szeletméret"
-
-#: ../../diskdrake/interactive.pm_.c:891
-msgid "Be careful: this operation is dangerous."
-msgstr "Vigyázat! Ez a művelet adatvesztést okozhat."
-
-#: ../../diskdrake/interactive.pm_.c:906
-msgid "What type of partitioning?"
-msgstr "Milyen típusú partícionálást szeretne?"
-
-#: ../../diskdrake/interactive.pm_.c:924
-msgid ""
-"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > "
-"1024).\n"
-"Either you use LILO and it won't work, or you don't use LILO and you don't "
-"need /boot"
-msgstr ""
-"Nem hozhatom létre a /boot-ot ennyire távol a merevlemez elejétől (cilinder\n"
-"> 1024). Ha a LILO-t használja, akkor az nem fog működni, ha pedig nem\n"
-"használja a LILO-t, akkor nincs szükség a /boot-ra."
-
-#: ../../diskdrake/interactive.pm_.c:928
-msgid ""
-"The partition you've selected to add as root (/) is physically located "
-"beyond\n"
-"the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-"If you plan to use the LILO boot manager, be careful to add a /boot partition"
-msgstr ""
-"Az a partíció, amelyet gyökérpartíciónak (/) jelölt ki, fizikailag az 1024.\n"
-"cilinder után található, és a rendszerben nincs /boot partíció.\n"
-"Ha a LILO-t szeretné használni, hozzon létre egy /boot partíciót."
-
-#: ../../diskdrake/interactive.pm_.c:934
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"So be careful to add a /boot partition"
-msgstr ""
-"Szoftveres RAID partíciót választott ki gyökérpartíciónak (/).\n"
-"Egyik rendszerindító program sem tudja ezt kezelni /boot partíció nélkül,\n"
-"ezért mindenképpen hozzon létre egy /boot partíciót."
-
-#: ../../diskdrake/interactive.pm_.c:954
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "A(z) \"%s\" meghajtó partíciótáblájának mentése következik!"
-
-#: ../../diskdrake/interactive.pm_.c:958
-msgid "You'll need to reboot before the modification can take place"
-msgstr "A változások csak a rendszer újraindításakor lépnek életbe"
-
-#: ../../diskdrake/interactive.pm_.c:969
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "A(z) %s partíció formázásakor a partíción található adatok elvesznek!"
-
-#: ../../diskdrake/interactive.pm_.c:971
-msgid "Formatting"
-msgstr "Formázás"
-
-#: ../../diskdrake/interactive.pm_.c:972
-#, c-format
-msgid "Formatting loopback file %s"
-msgstr "A(z) %s loopback fájl formázása"
-
-#: ../../diskdrake/interactive.pm_.c:973
-#: ../../install_steps_interactive.pm_.c:465
-#, c-format
-msgid "Formatting partition %s"
-msgstr "A(z) %s partíció formázása"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Hide files"
-msgstr "Fájlok elrejtése"
-
-#: ../../diskdrake/interactive.pm_.c:984
-msgid "Move files to the new partition"
-msgstr "Fájlok áthelyezése az új partícióra"
-
-#: ../../diskdrake/interactive.pm_.c:985
-#, c-format
-msgid ""
-"Directory %s already contain some data\n"
-"(%s)"
-msgstr ""
-"A(z) %s könyvtár már tartalmaz adatot\n"
-"(%s)"
-
-#: ../../diskdrake/interactive.pm_.c:996
-msgid "Moving files to the new partition"
-msgstr "Fájlok áthelyezése az új partícióra"
-
-#: ../../diskdrake/interactive.pm_.c:1000
-#, c-format
-msgid "Copying %s"
-msgstr "%s másolása"
-
-#: ../../diskdrake/interactive.pm_.c:1004
-#, c-format
-msgid "Removing %s"
-msgstr "%s eltávolítása"
-
-#: ../../diskdrake/interactive.pm_.c:1014
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "a(z) %s partíció jelenleg \"%s\"-ként ismert"
-
-#: ../../diskdrake/interactive.pm_.c:1035
-#: ../../diskdrake/interactive.pm_.c:1094
-msgid "Device: "
-msgstr "Eszköz: "
-
-#: ../../diskdrake/interactive.pm_.c:1036
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-meghajtó betűjele: %s (ez csak egy tipp)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1040
-#: ../../diskdrake/interactive.pm_.c:1048
-#: ../../diskdrake/interactive.pm_.c:1112
-msgid "Type: "
-msgstr "Típus: "
-
-#: ../../diskdrake/interactive.pm_.c:1044
-msgid "Name: "
-msgstr "Név: "
-
-#: ../../diskdrake/interactive.pm_.c:1052
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Kezdőszektor: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1053
-#, c-format
-msgid "Size: %s"
-msgstr "Méret: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1055
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s szektor"
-
-#: ../../diskdrake/interactive.pm_.c:1057
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "A(z) %d. cilindertől a(z) %d.-ig\n"
-
-#: ../../diskdrake/interactive.pm_.c:1058
-msgid "Formatted\n"
-msgstr "Formázva\n"
-
-#: ../../diskdrake/interactive.pm_.c:1059
-msgid "Not formatted\n"
-msgstr "Nincs formázva\n"
-
-#: ../../diskdrake/interactive.pm_.c:1060
-msgid "Mounted\n"
-msgstr "Csatlakoztatva\n"
-
-#: ../../diskdrake/interactive.pm_.c:1061
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1063
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr ""
-"Loopback fájl(ok):\n"
-" %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1064
-msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Az alapértelmezett indítási partíció\n"
-" (a DOS-nak, nem a LILO-nak)\n"
-
-#: ../../diskdrake/interactive.pm_.c:1066
-#, c-format
-msgid "Level %s\n"
-msgstr "%s. szint\n"
-
-#: ../../diskdrake/interactive.pm_.c:1067
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "A szelet mérete: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1068
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID lemezek: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1070
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "A loopback fájl neve: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1073
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition, you should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Ez a partíció valószínűleg\n"
-"meghajtóknak van fenntartva,\n"
-"ne módosítson rajta.\n"
-
-#: ../../diskdrake/interactive.pm_.c:1076
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ez egy speciális rendszerindítási\n"
-"partíció (hogy többféle operációs\n"
-"rendszert lehessen indítani).\n"
-
-#: ../../diskdrake/interactive.pm_.c:1095
-#, c-format
-msgid "Size: %s\n"
-msgstr "Méret: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1096
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilinder, %s fej, %s szektor\n"
-
-#: ../../diskdrake/interactive.pm_.c:1097
-msgid "Info: "
-msgstr "Információ: "
-
-#: ../../diskdrake/interactive.pm_.c:1098
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-lemezek: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1099
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "A partíciós tábla típusa: %s\n"
-
-#: ../../diskdrake/interactive.pm_.c:1100
-#, c-format
-msgid "on bus %d id %d\n"
-msgstr "busz: %d, id: %d\n"
-
-#: ../../diskdrake/interactive.pm_.c:1114
-#, c-format
-msgid "Options: %s"
-msgstr "Beállítások: %s"
-
-#: ../../diskdrake/interactive.pm_.c:1130
-msgid "Filesystem encryption key"
-msgstr "Fájlrendszer-titkosítási kulcs"
-
-#: ../../diskdrake/interactive.pm_.c:1131
-msgid "Choose your filesystem encryption key"
-msgstr "Válasszon fájlrendszer-titkosítási kulcsot"
-
-#: ../../diskdrake/interactive.pm_.c:1134
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ez a titkosítási kulcs túl egyszerű (legalább %d karakter hosszúnak kell "
-"lennie)"
-
-#: ../../diskdrake/interactive.pm_.c:1135
-msgid "The encryption keys do not match"
-msgstr "A titkosítási kulcsok nem egyeznek"
-
-#: ../../diskdrake/interactive.pm_.c:1138
-msgid "Encryption key"
-msgstr "Titkosítási kulcs"
-
-#: ../../diskdrake/interactive.pm_.c:1139
-msgid "Encryption key (again)"
-msgstr "Titkosítási kulcs (még egyszer)"
-
-#: ../../diskdrake/removable.pm_.c:47
-msgid "Change type"
-msgstr "A típus megváltoztatása"
-
-#: ../../diskdrake/removable_gtk.pm_.c:28
-msgid "Please click on a media"
-msgstr "Kattintson egy médiára"
-
-#: ../../diskdrake/smbnfs_gtk.pm_.c:165
-msgid "Search servers"
-msgstr "Kiszolgálók keresése"
-
-#: ../../fs.pm_.c:485 ../../fs.pm_.c:495 ../../fs.pm_.c:499 ../../fs.pm_.c:503
-#: ../../fs.pm_.c:507 ../../fs.pm_.c:511
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formázás sikertelen a(z) %s eszközön"
-
-#: ../../fs.pm_.c:548
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Nem tudom, hogyan kell megformázni a(z) %s eszközt %s típusúra"
-
-#: ../../fs.pm_.c:620 ../../fs.pm_.c:649 ../../fs.pm_.c:655
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "a(z) %s partíció ide történő csatolása sikertelen: %s"
-
-#: ../../fs.pm_.c:640
-#, c-format
-msgid "fsck failed with exit code %d or signal %d"
-msgstr "Az fsck kilépett \"%d\" hibakóddal vagy \"%d\" szignállal"
-
-#: ../../fs.pm_.c:670 ../../partition_table.pm_.c:596
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "hiba történt a(z) %s leválasztásakor: %s"
-
-#: ../../fsedit.pm_.c:21
-msgid "simple"
-msgstr "egyszerű"
-
-#: ../../fsedit.pm_.c:25
-msgid "with /usr"
-msgstr "/usr-rel"
-
-#: ../../fsedit.pm_.c:30
-msgid "server"
-msgstr "kiszolgáló"
-
-#: ../../fsedit.pm_.c:467
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Nem lehet JFS-t használni 16 MB-nál kisebb partíción"
-
-#: ../../fsedit.pm_.c:468
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Nem lehet ReiserFS-t használni 32 MB-nál kisebb partíción"
-
-#: ../../fsedit.pm_.c:477
-msgid "Mount points must begin with a leading /"
-msgstr "A csatlakoztatási pontoknak /-rel kell kezdődni"
-
-#: ../../fsedit.pm_.c:478
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Már van egy partíció amelynek %s a csatlakoztatási pontja\n"
-
-#: ../../fsedit.pm_.c:482
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Nem használható LVM logikai kötet a(z) %s csatlakoztatási ponthoz"
-
-#: ../../fsedit.pm_.c:484
-msgid "This directory should remain within the root filesystem"
-msgstr "Ennek a könyvtárnak a gyökér-fájlrendszeren belül kell maradnia"
-
-#: ../../fsedit.pm_.c:486
-msgid "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-msgstr ""
-"Valódi fájlrendszert (Ext2, ReiserFS) kell használni ennél a csatlakoztatási "
-"pontnál\n"
-
-#: ../../fsedit.pm_.c:488
-#, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Titkosított fájlrendszer nem használható ehhez a csatolási ponthoz: %s"
-
-#: ../../fsedit.pm_.c:546
-msgid "Not enough free space for auto-allocating"
-msgstr "Nincs elég szabad terület az automatikus helyfoglaláshoz"
-
-#: ../../fsedit.pm_.c:548
-msgid "Nothing to do"
-msgstr "Nincs mit tenni"
-
-#: ../../fsedit.pm_.c:612
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Hiba történt %s írásra való megnyitásánál: %s"
-
-#: ../../fsedit.pm_.c:697
-msgid ""
-"An error has occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Hiba történt - nincs olyan meghajtó, amelyen új fájlrendszert lehetne "
-"létrehozni. Ellenőrizze a gépben található eszközöket."
-
-#: ../../fsedit.pm_.c:720
-msgid "You don't have any partitions!"
-msgstr "Egyetlen partíció sincs!"
-
-#: ../../help.pm_.c:13
-msgid ""
-"GNU/Linux is a multiuser system, and this means that each user can have his\n"
-"own preferences, his own files and so on. You can read the ``User Guide''\n"
-"to learn more. But unlike \"root\", which is the administrator, the users\n"
-"you will add here will not be entitled to change anything except their own\n"
-"files and their own configuration. You will have to create at least one\n"
-"regular user for yourself. That account is where you should log in for\n"
-"routine use. Although it is very practical to log in as \"root\" everyday,\n"
-"it may also be very dangerous! The slightest mistake could mean that your\n"
-"system would not work any more. If you make a serious mistake as a regular\n"
-"user, you may only lose some information, but not the entire system.\n"
-"\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
-"as you can actually enter whatever you want. DrakX will then take the first\n"
-"word you have entered in the box and will bring it over to the \"User\n"
-"name\". This is the name this particular user will use to log onto the\n"
-"system. You can change it. You then have to enter a password here. A\n"
-"non-privileged (regular) user's password is not as crucial as \"root\"' one\n"
-"from a security point of view, but that is no reason to neglect it: after\n"
-"all, your files are at risk.\n"
-"\n"
-"If you click on \"Accept user\", you can then add as many as you want. Add\n"
-"a user for each one of your friends: your father or your sister, for\n"
-"example. When you finish adding all the users you want, select \"Done\".\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default)."
-msgstr ""
-"A Linux többfelhasználós rendszer; ez azt jelenti, hogy minden\n"
-"felhasználónak lehetnek például külön beállításai és saját fájljai.\n"
-"További információkat a Felhasználói Kézikönyvből lehet megtudni.\n"
-"A \"root\" nevű felhasználótól (ez az azonosító a rendszergazdát jelöli)\n"
-"eltérően az itt felvett felhasználóknak csak a saját fájljaikat és a saját\n"
-"beállításaikat lesz joguk módosítani. Javasolt legalább egy \"normál\"\n"
-"felhasználót felvenni az Ön saját használatára. Ezen normál felhasználói\n"
-"azonosítóval érdemes elvégezni az olyan tevékenységeket, amelyek nem\n"
-"igényelnek rendszergazdai jogosultságot. Bár nagyon praktikus minden\n"
-"alkalommal rendszergazdaként jelentkezni be, ez nagyon veszélyes is.\n"
-"Rendszergazdaként használva a legapróbb hiba hatására is meghibásodhat\n"
-"a rendszer. Ha normál felhasználóként követ el hibát, akkor esetleg\n"
-"elveszít bizonyos adatokat, de a rendszert nem teheti tönkre.\n"
-"\n"
-"Először is meg kell adnia a valódi nevét. Ez természetesen nem kötelező;\n"
-"bármit be lehet írni névként. A telepítő a megadott név első szavát\n"
-"ajánlja fel a \"Felhasználónév\" mezőben. Ez utóbbi az a név, amellyel\n"
-"az adott felhasználó be tud majd jelentkezni a rendszerbe. A felkínált név\n"
-"módosítható. A felhasználónév megadása után meg kell adni az ahhoz tartozó\n"
-"kívánt jelszót. Egy normál felhasználó jelszava biztonsági szempontból nem\n"
-"annyira kritikus, mint a rendszergazdáé; ez viszont nem ok arra, hogy\n"
-"felületesen legyen kezelve - végül is az Ön fájljairól van szó.\n"
-"\n"
-"A \"Név elfogadása\" gombbal vehető fel újabb felhasználó. Bármennyi\n"
-"felhasználó létrehozható. Vegyen fel egy-egy felhasználónevet mindazok\n"
-"számára, akik a gépet használni fogják. Amikor végzett a felhasználónevek\n"
-"létrehozásával, kattintson a \"Kész\" gombra.\n"
-"\n"
-"Ha a \"Speciális\" gombra kattint, módosíthatja az adott felhasználó\n"
-"alapértelmezett parancsértelmezőjét (alapértelmezés szerint ez a \"bash\")."
-
-#: ../../help.pm_.c:41
-msgid ""
-"Listed above are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, they are good for most common\n"
-"installations. If you make any changes, you must at least define a root\n"
-"partition (\"/\"). Do not choose too small a partition or you will not be\n"
-"able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a partition for \"/home\"\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Fent láthatók a lemezen talált, már létező linuxos partíciók.\n"
-"A varázsló javaslatai általában elfogadhatók, általános célú telepítésnél\n"
-"általában megfelelnek. Ha megváltoztatja a beállításokat, mindenképpen\n"
-"jelölje ki a gyökérpartíciót (\"/\"). Ne válassza túl kicsire, mert akkor\n"
-"nem lesz elég hely a szoftverek telepítéséhez. Ha külön partícióra\n"
-"szeretné helyezni a felhasználói adatokat, jelöljön ki egy külön \"/home\"\n"
-"partíciót (ez csak akkor lehetséges, ha legalább két Linux partíció\n"
-"létezik).\n"
-"\n"
-"A partíciók listájának mezői: \"név\", \"kapacitás\".\n"
-"\n"
-"A \"név\" képzési szabálya: \"a merevlemez típusa\", \"a lemez\n"
-"azonosítója\", \"a partíció azonosítója\" (például \"hda1\").\n"
-"\n"
-"\"A merevlemez típusa\" \"hd\", ha a lemez IDE-csatolós, és \"sd\",\n"
-"ha SCSI-csatolós.\n"
-"\n"
-"\"A lemez azonosítója\" egy betű a \"hd\" illetve az \"sd\" után.\n"
-"IDE-csatolós merevlemezek esetén:\n"
-"\n"
-" - \"a\" jelentése: \"első (master) meghajtó az első IDE-vezérlőn\"\n"
-"\n"
-" - \"b\" jelentése: \"második (slave) meghajtó az első IDE-vezérlőn\"\n"
-"\n"
-" - \"c\" jelentése: \"első meghajtó a második IDE-vezérlőn\"\n"
-"\n"
-" - \"d\" jelentése: \"második meghajtó a második IDE-vezérlőn\"\n"
-"\n"
-"SCSI-csatolós lemezeknél az \"a\" jelentése: \"a legalacsonyabb\n"
-"SCSI-azonosító\", \"b\" jelentése: \"a második legalacsonyabb\n"
-"SCSI-azonosító\", ..."
-
-#: ../../help.pm_.c:72
-msgid ""
-"The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM and will eject the\n"
-"current CD and ask you to insert a different one as required."
-msgstr ""
-"A Mandrake Linux telepítőanyag több CD-n helyezkedik el. Ha egy "
-"kiválasztott\n"
-"csomag egy másik CD-n található, akkor a DrakX (a telepítő) kiadja az\n"
-"aktuális CD-t, és megkéri Önt, hogy helyezzen be egy másikat."
-
-#: ../../help.pm_.c:77
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"you are not supposed to know them all by heart.\n"
-"\n"
-"If you are performing a standard installation from a CD-ROM, you will first\n"
-"be asked to specify the CDs you currently have (in Expert mode only). Check\n"
-"the CD labels and highlight the boxes corresponding to the CDs you have\n"
-"available for installation. Click \"OK\" when you are ready to continue.\n"
-"\n"
-"Packages are sorted in groups corresponding to a particular use of your\n"
-"machine. The groups themselves are sorted into four sections:\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
-"\n"
-" * \"Development\": if your machine is to be used for programming, choose\n"
-"the desired group(s);\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, you will be able\n"
-"to select which of the most common services you wish to install on your\n"
-"machine;\n"
-"\n"
-" * \"Graphical Environment\": finally, this is where you will choose your\n"
-"preferred graphical environment. At least one must be selected if you want\n"
-"to have a graphical workstation!\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you deselect all groups when performing a regular\n"
-"installation (by opposition to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the fewer packages possible to have a working\n"
-"graphical desktop;\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server;\n"
-"\n"
-" * \"Truly minimal install\": will install the strict minimum necessary to\n"
-"get a working Linux system, in command line only. This installation is\n"
-"about 65Mb large.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Most meg kell adnia, mely programokat kívánja telepíteni a rendszerére.\n"
-"Több ezer program létezik Mandrake Linuxhoz; természetesen Önnek nem\n"
-"szükséges mindet ismernie.\n"
-"\n"
-"Ha szabványos telepítést végez CD-ről, akkor először meg kell adnia, mely\n"
-"CD-kkel rendelkezik (csak a szakértői módra igaz). Nézze át a CD-k címeit,\n"
-"és jelölje be az elérhető CD-ket a listában. Ha készen áll a folytatásra,\n"
-"kattintson az \"OK\" gombra.\n"
-"\n"
-"A csomagok a gép lehetséges felhasználási területei szerint csoportokba\n"
-"vannak rendezve. Maguk a csoportok négy szakaszba vannak sorolva:\n"
-"\n"
-" - \"Munkaállomás\": ha munkaállomásként tervezi használni a gépet, akkor\n"
-"válasszon az ennek megfelelő csoportok közül.\n"
-"\n"
-" - \"Fejlesztés\": ha a gép programozásra is lesz használva, akkor\n"
-"válassza ki a kívánt csoportokat.\n"
-"\n"
-" - \"Kiszolgáló\": ha a gép kiszolgálóként lesz használva, itt lehetőség\n"
-"van annak kiválasztására, hogy a gyakrabban használt szolgáltatások közül\n"
-"melyeket kívánja telepíteni a gépre.\n"
-"\n"
-" - \"Grafikus környezet\": itt választható ki a kívánt grafikus környezet.\n"
-"Ha grafikus munkaállomást szeretne, akkor legalább egyet ki kell\n"
-"választani.\n"
-"\n"
-"Ha az egérkurzort egy csoport neve fölé viszi, akkor megjelenik egy rövid\n"
-"magyarázat az adott csoportról. Ha telepítéskor az összes csoport\n"
-"kijelölését megszünteti (frissítésre ez nem vonatkozik), akkor a telepítő\n"
-"választási lehetőséget fog felkínálni a minimális telepítésre vonatkozóan.\n"
-"A következő lehetőségek választhatók:\n"
-"\n"
-" - \"X-szel együtt\": grafikus rendszer a lehető legkevesebb csomag\n"
-"telepítésével.\n"
-"\n"
-" - \"Alapvető dokumentációval\": az alaprendszer az alapvető programokkal\n"
-"és azok dokumentációjával. Megfelel például kiszolgáló telepítéséhez.\n"
-"\n"
-" - \"Valóban minimális telepítés\": a lehető legkisebb telepítés;\n"
-"parancssorból használható Linux rendszer. Körülbelül 65 megabájt méretű\n"
-"telepítés.\n"
-"\n"
-"Bejelölheti a \"Csomagok egyedi kiválasztása\" opciót; ez akkor hasznos,\n"
-"ha Ön ismeri a felkínált csomagokat, illetve ha teljes mértékben\n"
-"ellenőrizni kívánja, mi lesz a gépre feltelepítve.\n"
-"\n"
-"Ha a telepítést \"Frissítés\" üzemmódban indította el, akkor megszüntetheti\n"
-"akár az összes csoport kijelölését is, hogy elkerülje új programok\n"
-"telepítését. Ez különösen akkor lehet hasznos, ha egy meglevő rendszert\n"
-"kíván helyreállítani vagy frissíteni."
-
-#: ../../help.pm_.c:128
-msgid ""
-"Finally, depending on whether or not you selected individual packages, you\n"
-"will be presented a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right. When your selection is finished, click the \"Install\" button which\n"
-"will then launch the installation process. Depending on the speed of your\n"
-"hardware and the number of packages that need to be installed, it may take\n"
-"a while to complete the process. An estimate of the time it will take to\n"
-"install everything is displayed on the screen, to help you gauge if there\n"
-"is sufficient time to enjoy a cup of coffee.\n"
-"\n"
-"!! If a server package has been selected, either intentionally or because\n"
-"it was part of a whole group, you will be asked to confirm that you really\n"
-"want those servers to be installed. Under Mandrake Linux, any installed\n"
-"servers are started by default at boot time. Even if they are safe and have\n"
-"no known issues at the time the distribution was shipped, it may happen\n"
-"that security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default. !!\n"
-"\n"
-"The \"Automatic dependencies\" option simply disables the warning dialog\n"
-"which appears whenever the installer automatically selects a package. This\n"
-"occurs because it has determined that it needs to satisfy a dependency with\n"
-"another package in order to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows to load the\n"
-"package list chosen during a previous installation. Clicking on this icon\n"
-"will ask you to insert a floppy disk previously created at the end of\n"
-"another installation. See the second tip of last step on how to create such\n"
-"a floppy."
-msgstr ""
-"Végül, attól függően, hogy kívánt-e egyedi csomagkiválasztást használni,\n"
-"megjelenik egy fa, amely az összes telepíthető programcsomagot tartalmazza\n"
-"csoportokba és alcsoportokba kategorizálva. A fa böngészése közben\n"
-"nem csak csomagokat jelölhet ki, hanem egész csoportokat illetve\n"
-"alcsoportokat is.\n"
-"\n"
-"Amikor kiválaszt egy csomagot a fában, a jobb oldalon megjelenik egy leírás\n"
-"az adott csomagról. Ha végzett a kijelölésekkel, kattintson a \"Telepítés\"\n"
-"gombra; ennek hatására megkezdődik a programok telepítése. A gép\n"
-"sebességétől illetve a telepítendő csomagok számától függően a folyamat\n"
-"jelentős időt vehet igénybe. A telepítő megjelenít egy becslést arra\n"
-"vonatkozóan, hogy mennyi idő van hátra a telepítés befejeztéig.\n"
-"\n"
-"Ha kiszolgálócsomagok is ki lettek választva - akár közvetlenül, akár\n"
-"bizonyos csoportok tagjaként -, a telepítő megerősítést kér Öntől arra\n"
-"vonatkozóan, hogy valóban telepíteni kívánja-e azon kiszolgálószoftvereket.\n"
-"A Mandrake Linux rendszerben alapértelmezésben az összes feltelepített\n"
-"kiszolgálóprogram elindításra kerül a rendszer indulásakor. Még ha azok\n"
-"biztonságosak is illetve nem rendelkeznek ismert problémákkal, akkor is\n"
-"előfordulhat, hogy utóbb biztonsági problémák merülnek fel velük\n"
-"kapcsolatban. Ha nem tudja, hogy egy bizonyos - telepítésre kijelölt -\n"
-"szolgáltatásnak mi a feladata illetve miért kerül telepítésre, akkor\n"
-"kattintson a \"Nem\" gombra. Ha az \"Igen\" gombra kattint, akkor a\n"
-"felsorolt szolgáltatások telepítésre kerülnek, és alapértelmezés szerint\n"
-"automatikusan elindításra kerülnek majd.\n"
-"\n"
-"\"Az automatikusan kijelölt csomagok mutatása\" opció bejelölésének\n"
-"hatására a telepítő jelezni fogja, ha automatikusan jelöl ki csomagokat\n"
-"telepítésre. Ilyesmi azért fordul elő, mert bizonyos függőségek miatt\n"
-"szükség lehet további csomagok telepítésére is.\n"
-"\n"
-"A lista alatt levő, floppylemezt ábrázoló ikon lehetővé teszi egy korábbi\n"
-"telepítés során elmentett csomaglista betöltését. Ezen ikonra kattintva a\n"
-"telepítő megkéri Önt, hogy tegyen be egy floppyt, amely egy korábbi\n"
-"telepítés végén készült. Ha szeretné megtudni, hogyan lehet ilyen floppyt\n"
-"készíteni, tekintse meg a telepítés utolsó lépésében szereplő tippet."
-
-#: ../../help.pm_.c:164
-msgid ""
-"You are now proposed to set up your Internet/network connection. If you\n"
-"wish to connect your computer to the Internet or to a local network, click\n"
-"\"OK\". The autodetection of network devices and modem will be launched. If\n"
-"this detection fails, uncheck the \"Use auto detection\" box next time. You\n"
-"may also choose not to configure the network, or do it later; in that case,\n"
-"simply click the \"Cancel\" button.\n"
-"\n"
-"Available connections are: traditional modem, ISDN modem, ADSL connection,\n"
-"cable modem, and finally a simple LAN connection (Ethernet).\n"
-"\n"
-"Here, we will not detail each configuration. Simply make sure that you have\n"
-"all the parameters from your Internet Service Provider or system\n"
-"administrator.\n"
-"\n"
-"You can consult the ``User Guide'' chapter about Internet connections for\n"
-"details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection.\n"
-"\n"
-"If you wish to configure the network later after installation, or if you\n"
-"are finished configuring your network connection, click \"Cancel\"."
-msgstr ""
-"Itt beállíthatja az internetkapcsolatot illetve a hálózati kapcsolatot.\n"
-"Ha szeretné a gépét az internetre vagy egy helyi hálózatra csatlakoztatni,\n"
-"akkor kattintson az \"OK\" gombra. A telepítő felderíti a hálózati\n"
-"eszközöket és a modemeket. Ha a felderítés nem jár sikerrel, akkor a\n"
-"következő alkalommal kapcsolja ki az \"Automatikus detektálás\" opciót. Ha\n"
-"nem kívánja beállítani a hálózatot, vagy később kívánja azt beállítani,\n"
-"akkor kattintson a \"Mégsem\" gombra.\n"
-"\n"
-"A lehetséges kapcsolatok: hagyományos modem, ISDN-modem, ADSL-kapcsolat,\n"
-"kábelmodem, egyszerű helyi hálózati (LAN) kapcsolat (Ethernet).\n"
-"\n"
-"A lehetséges beállítások itt nem kerülnek részletezésre. A szükséges\n"
-"paramétereket az internet-szolgáltatótól illetve a\n"
-"rendszeradminisztrátortól tudhatja meg.\n"
-"\n"
-"A beállításokkal kapcsolatban a felhasználói kézikönyv\n"
-"internetkapcsolatokkal foglalkozó fejezetéből szerezhet további\n"
-"információkat. A kapcsolat beállítását nem szükséges a telepítés közben\n"
-"elvégezni; a kézikönyv leírja, hogyan lehet azt megtenni egy feltelepített\n"
-"rendszeren.\n"
-"\n"
-"Ha a hálózat beállítását a telepítés után kívánja elvégezni, illetve ha\n"
-"befejezte a hálózati kapcsolat beállítását, akkor kattintson a \"Mégsem\"\n"
-"gombra."
-
-#: ../../help.pm_.c:186
-msgid ""
-"You may now choose which services you wish to start at boot time.\n"
-"\n"
-"Here are presented all the services available with the current\n"
-"installation. Review them carefully and uncheck those which are not always\n"
-"needed at boot time.\n"
-"\n"
-"You can get a short explanatory text about a service by selecting a\n"
-"specific service. However, if you are not sure whether a service is useful\n"
-"or not, it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services which you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Most lehet kijelölni az automatikusan elindítandó szolgáltatásokat.\n"
-"\n"
-"Itt látható a jelenleg telepített összes szolgáltatás listája.\n"
-"Vizsgálja meg a listát alaposan, és törölje a kijelölést azok mellől,\n"
-"amelyek automatikus elindítására nincs szükség.\n"
-"\n"
-"Egy szolgáltatás kiválasztásakor mindig megjelenik a hozzá tartozó rövid\n"
-"leírás. Ha nem tudja biztosan, hogy a szolgáltatásra szükség van-e vagy\n"
-"sem, akkor ne változtassa meg az alapértelmezett indítási módot.\n"
-"\n"
-"Gondosan járjon el, ha a gépet kiszolgálónak fogja használni,\n"
-"ne indítson el egy olyan szolgáltatást sem automatikusan, amelyre nincs\n"
-"szükség. A feleslegesen elindított szolgáltatások biztonsági kockázatot\n"
-"jelentenek. Csak a tényleges feladatot ellátó szolgáltatásokat engedélyezze."
-
-#: ../../help.pm_.c:203
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n"
-"local time according to the time zone you selected. It is however possible\n"
-"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n"
-"hardware clock is the same as the system clock. This is useful when the\n"
-"machine is hosting another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization\" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. In the\n"
-"list that is presented, choose a server located near you. Of course you\n"
-"must have a working Internet connection for this feature to work. It will\n"
-"actually install on your machine a time server which can be optionally used\n"
-"by other machines on your local network."
-msgstr ""
-"A Linux az időt a GMT (Greenwich Mean Time) alapján kezeli - a\n"
-"kiválasztott időzónának megfelelő helyi időre konvertálja azt. Az\n"
-"időzónához való igazítás kikapcsolható \"A gép órája GMT-időt mutat\"\n"
-"opció kikapcsolásával - ekkor a rendszeróra szerinti idő azonos lesz a\n"
-"gép órája szerintivel. Ez akkor hasznos, ha van a gépen más operációs\n"
-"rendszer is (például Windows).\n"
-"\n"
-"Az \"Automatikus időszinkronizáció\" opció automatikusan beállítja az órát\n"
-"egy internetes géphez kapcsolódva. Az erre alkalmas gépek megjelenő\n"
-"listájából válasszon ki egy Önhöz közel levőt. Természetesen ehhez szükség\n"
-"van működő internetkapcsolatra. Ez a funkció feltelepít az Ön gépére\n"
-"egy időkiszolgálót, amelyet a helyi hálózat többi gépe is használhat."
-
-#: ../../help.pm_.c:217
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n"
-"will try to configure X automatically.\n"
-"\n"
-"It is extremely rare for it to fail, unless the hardware is very old (or\n"
-"very new). If it succeeds, it will start X automatically with the best\n"
-"resolution possible, depending on the size of the monitor. A window will\n"
-"then appear and ask you if you can see it.\n"
-"\n"
-"If you are doing an \"Expert\" installation, you will enter the X\n"
-"configuration wizard. See the corresponding section of the manual for more\n"
-"information about this wizard.\n"
-"\n"
-"If you can see the message during the test, and answer \"Yes\", then DrakX\n"
-"will proceed to the next step. If you cannot see the message, it simply\n"
-"means that the configuration was wrong and the test will automatically end\n"
-"after 10 seconds, restoring the screen."
-msgstr ""
-"Az X (teljes néven: X Window System) a Linux grafikus felületét nyújtó\n"
-"rendszer. A Mandrake Linuxban levő grafikus környezetek (KDE, GNOME,\n"
-"AfterStep, WindowMaker, ...) ezen grafikus rendszert használják.\n"
-"A telepítő most megkísérli automatikusan beállítani az X rendszert.\n"
-"\n"
-"Bizonyos - ritkán előforduló - esetekben az automatikus beállítás nem\n"
-"hajtható végre; ez általában a nagyon régi illetve a nagyon új\n"
-"hardverelemek esetén van így. Ha sikeres a művelet, akkor az X rendszer\n"
-"automatikusan elindításra kerül a legmegfelelőbb grafikus felbontással (ez\n"
-"utóbbi a monitor méretétől is függ). Egy ablaknak kell megjelennie,\n"
-"amelyben a telepítő megkérdi Önt, hogy az ablak látható-e.\n"
-"\n"
-"Amennyiben \"Szakértő\" módban végzi a telepítést, a telepítő elindítja\n"
-"az X beállítási varázslót. A varázslóval kapcsolatban további információk\n"
-"a kézikönyvben találhatók.\n"
-"\n"
-"Ha látható az ablakban megjelenő üzenet, akkor nyomja le az \"Igen\"\n"
-"gombot; a telepítő ekkor a következő lépésre ugrik. Ha viszont az üzenet\n"
-"nem látható, az azt jelenti, hogy a beállítás nem megfelelő. A beállítás\n"
-"tesztelése 10 másodperc elteltével automatikusan véget ér, a telepítő\n"
-"ezután visszaállítja a képernyőt a korábbi üzemmódba."
-
-#: ../../help.pm_.c:237
-msgid ""
-"The first time you try the X configuration, you may not be very satisfied\n"
-"with its display (screen is too small, shifted left or right...). Hence,\n"
-"even if X starts up correctly, DrakX then asks you if the configuration\n"
-"suits you. It will also propose to change it by displaying a list of valid\n"
-"modes it could find, asking you to select one.\n"
-"\n"
-"As a last resort, if you still cannot get X to work, choose \"Change\n"
-"graphics card\", select \"Unlisted card\", and when prompted on which\n"
-"server, choose \"FBDev\". This is a failsafe option which works with any\n"
-"modern graphics card. Then choose \"Test again\" to be sure."
-msgstr ""
-"Amikor először próbálja ki az X beállításait, elképzelhető, hogy nem lesz\n"
-"megelégedve azokkal (például a képernyő túl kicsi, vagy oldalirányban el\n"
-"van tolódva). Ezért a DrakX még abban az esetben is megkérdi Öntől, hogy\n"
-"megfelelnek-e a beállítások, ha az X rendben elindul. A program megjelenít\n"
-"egy listát az általa felismert érvényes üzemmódokról. A listából\n"
-"kiválasztható egy megfelelő grafikus mód.\n"
-"\n"
-"Végső esetben - ha az X rendszert nem sikerül működésbe hozni - válassza\n"
-"\"A grafikus kártya módosítása\" funkciót, majd az \"Unlisted\" (a\n"
-"listában nem szereplő kártya) bejegyzést, amikor pedig a program megkérdi,\n"
-"hogy Ön melyik kiszolgálót szeretné, akkor válassza az \"FBDev\"-et.\n"
-"Ez egy biztonsági opció, amely bármely modern grafikus kártyával működik.\n"
-"Ezután válassza a \"Még egy próba\" funkciót a biztonság kedvéért."
-
-#: ../../help.pm_.c:249
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Végül el kell dönteni, hogy a rendszer grafikus módban induljon-e vagy sem.\n"
-"A program akkor is felteszi ezt a kérdést, ha Ön kihagyta a beállítások\n"
-"kipróbálását. Ha a gép kiszolgálóként fog üzemelni, vagy nem sikerült\n"
-"beállítani a grafikus módot, akkor a \"Nem\"-et érdemes választani."
-
-#: ../../help.pm_.c:256
-msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
-"booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
-"at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
-"should come back to this step for help in at least two situations:\n"
-"\n"
-" * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n"
-"of your main disk (unless you are using another boot manager), to allow you\n"
-"to start up with either Windows or GNU/Linux (assuming you have Windows in\n"
-"your system). If you need to reinstall Windows, the Microsoft install\n"
-"process will rewrite the boot sector, and then you will not be able to\n"
-"start GNU/Linux!\n"
-"\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
-"contains a fair number of system tools for restoring a system, which has\n"
-"crashed due to a power failure, an unfortunate typing error, a typo in a\n"
-"password, or any other reason.\n"
-"\n"
-"When you click on this step, you will be asked to enter a disk inside the\n"
-"drive. The floppy disk you will insert must be empty or contain data which\n"
-"you do not need. You will not have to format it since DrakX will rewrite\n"
-"the whole disk."
-msgstr ""
-"A Mandrake Linux CD-nek van egy beépített helyreállítási üzemmódja. Ezen\n"
-"üzemmód a következőképpen érhető el: indítsa a rendszert a CD-ről, majd\n"
-"nyomja le az \"F1\" billentyűt, és gépelje be a megjelenő parancssorban\n"
-"azt, hogy \"rescue\". Ha viszont a gép nem képes CD-ről való\n"
-"rendszerindításra, akkor vissza kell térnie ezen lépéshez segítségért - ez\n"
-"legalább két esetben szükséges lehet:\n"
-"\n"
-" - A rendszerbetöltő telepítésekor (hacsak Ön nem használ más\n"
-"rendszerindító programot) a telepítő módosítja a fő lemez\n"
-"betöltőszektorát (boot sector; más néven: MBR) annak érdekében, hogy\n"
-"többféle operációs rendszert is be lehessen tölteni (például: Linux\n"
-"és Windows - ha van a gépen Windows). Ha Ön újratelepíti a Windowst, akkor\n"
-"a Microsoft-féle telepítő át fogja írni a betöltőszektort, és emiatt Ön nem\n"
-"lesz képes Linuxt indítani.\n"
-"\n"
-" - Ha probléma merül fel, és Ön nem tudja elindítani a Linux rendszert\n"
-"a merevlemezről, akkor ezen floppy fogja jelenteni az egyetlen lehetőséget\n"
-"arra, hogy elindítsa a rendszert. A floppy programokat tartalmaz a rendszer\n"
-"helyreállításához (arra az esetre, ha például áramkimaradás történt).\n"
-"\n"
-"Ha kéri ennek a lépésnek a végrehajtását, akkor a telepítő megkéri Önt\n"
-"arra, hogy tegyen be egy floppyt a meghajtóba. Ügyeljen arra, hogy a\n"
-"floppylemezen ne legyen megőrzésre szánt adat. A lemezt nem szükséges\n"
-"előzetesen formázni, mivel a telepítő felülírja a teljes lemez tartalmát."
-
-#: ../../help.pm_.c:280
-msgid ""
-"At this point, you need to choose where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space, you will\n"
-"need to partition it. Basically, partitioning a hard drive consists of\n"
-"logically dividing it to create space to install your new Mandrake Linux\n"
-"system.\n"
-"\n"
-"Because the partitioning process' effects are usually irreversible,\n"
-"partitioning can be intimidating and stressful if you are an inexperienced\n"
-"user. Fortunately, there is a wizard which simplifies this process. Before\n"
-"beginning, please consult the manual and take your time.\n"
-"\n"
-"If you are running the installation in Expert mode, you will enter\n"
-"DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n"
-"fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n"
-"From the installation interface, you can use the wizards as described here\n"
-"by clicking the dialog's \"Wizard\" button.\n"
-"\n"
-"If partitions have already been defined, either from a previous\n"
-"installation or from another partitioning tool, simply select those to\n"
-"install your Linux system.\n"
-"\n"
-"If partitions are not defined, you will need to create them using the\n"
-"wizard. Depending on your hard drive configuration, several options are\n"
-"available:\n"
-"\n"
-" * \"Use free space\": this option will simply lead to an automatic\n"
-"partitioning of your blank drive(s). You will not be prompted further;\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option;\n"
-"\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
-"be performed without the loss of any data, provided you previously\n"
-"defragment the Windows partition. Backing up your data won't hurt either..\n"
-"This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful with this solution because you will\n"
-"not be able to revert your choice after you confirm;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost;\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
-msgstr ""
-"Most kell megadni, hogy a Mandrake Linux telepítése a merevlemez melyik\n"
-"részére történjen. Ha a lemez még teljesen üres, vagy a korábban telepített\n"
-"operációs rendszer(ek) miatt nincs elég szabad hely, akkor újra kell\n"
-"partícionálni a lemezt. A partícionálás a lemezterület logikai\n"
-"újrafelosztását jelenti - erre a Mandrake Linux telepítéséhez szükséges\n"
-"hely létrehozása érdekében van szükség.\n"
-"\n"
-"A partícionálás veszélyes művelet. Hiba esetén adatvesztéssel járhat,\n"
-"ráadásul általában nincs lehetőség visszatérni egy korábbi állapothoz.\n"
-"Emiatt kezdő felhasználóknak sok nehézséget okozhat. Ez a varázsló\n"
-"megkönnyíti a művelet végrehajtását, de mielőtt elindítaná, érdemes\n"
-"alaposan átolvasni a kézikönyv idevágó részét.\n"
-"\n"
-"Ha a telepítést szakértői módban futtatja, el fog indulni a DiskDrake nevű\n"
-"program, amely a Mandrake Linux rendszer partícionálóeszköze. Ezen program\n"
-"lehetővé teszi a partíciók módosítását. További információkat a "
-"felhasználói\n"
-"kézikönyv DiskDrake-ről szóló fejezetében olvashat. Az ott ismertetett\n"
-"varázslók a telepítőből is elindíthatók, ehhez a \"Varázsló\" gombot kell\n"
-"lenyomni.\n"
-"\n"
-"Ha a partíciók már definiálva vannak - akár egy korábbi telepítés által,\n"
-"akár egy másféle partícionálóeszköz által -, akkor egyszerűen válassza ki\n"
-"azokat a Linux rendszer telepítése számára.\n"
-"\n"
-"Ha a szükséges partíciók még nem állnak rendelkezésre, létre kell hozni\n"
-"azokat a varázslóval. A lemezek tartalmától függően többféle módon lehet\n"
-"eljárni:\n"
-"\n"
-" - \"A szabad terület felhasználása\": ez a lehetőség az üres meghajtók\n"
-"automatikus partícionálását jelenti. További kérdést nem tesz fel a\n"
-"telepítő.\n"
-"\n"
-" - \"Már létező partíció használata\": a varázsló talált egy vagy több\n"
-"linuxos partíciót a lemezen. Ha ezeket szeretné használni a\n"
-"telepítéshez, válassza ezt a lehetőséget.\n"
-"\n"
-" - \"A Windows partíción található szabad hely felhasználása\": ha a\n"
-"Windows úgy van feltelepítve a lemezre, hogy elfoglalja az összes\n"
-"elérhető területet, akkor annak egy részét fel kell szabadítani a Linux\n"
-"számára. Ez történhet a Windows-partíció törlésével (lásd \"A teljes\n"
-"lemez törlése\" és a \"Szakértői mód\" lehetőségeket) vagy\n"
-"átméretezésével. Az átméretezés végrehajtható a lemezen levő adatok\n"
-"elvesztése nélkül - feltéve, hogy azt megelőzően töredezettségmentesítve\n"
-"lett a Windows-partíció. Javasolt továbbá az adatok mentése is.\n"
-"Ezen módszer a javasolt abban az esetben, ha a Mandrake Linuxt és a\n"
-"Microsoft Windowst ugyanazon a gépen szeretné használni.\n"
-"\n"
-"Ha ezt a lehetőséget választja, ne feledkezzen meg arról, hogy ennek\n"
-"hatására a Microsoft Windows partíció mérete a mostaninál kisebb lesz,\n"
-"tehát a Windows használatakor kevesebb hely lesz az adatok tárolására\n"
-"és új szoftverek telepítésére.\n"
-"\n"
-" - \"A teljes lemez törlése\": ha minden adatot és minden partíciót\n"
-"törölni szeretne a lemezről, és a telepítéshez az így felszabaduló\n"
-"helyet szeretné használni, akkor válassza ezt a lehetőséget. Legyen\n"
-"nagyon óvatos ezzel a lehetőséggel, mert a lemezen levő adatok\n"
-"véglegesen elvesznek a megerősítés után.\n"
-"\n"
-"Ha ezt a lehetőséget választja, a lemezen levő összes adat elvész.\n"
-"\n"
-" - \"A Windows(TM) eltávolítása\": ez a funkció egyszerűen letöröl mindent\n"
-"a lemezről, és újrapartícionálja azt. A lemezen levő összes adat elvész.\n"
-"\n"
-"Ha ezt a lehetőséget választja, a lemezen levő összes adat elvész.\n"
-"\n"
-" - \"Szakértői mód\": ha közvetlenül (varázsló nélkül) szeretné elvégezni\n"
-"a partícionálást, akkor válassza ezt a lehetőséget. Legyen óvatos - sok\n"
-"minden elvégezhető ebben az üzemmódban, de a használata veszélyes. Könnyen\n"
-"elveszítheti a lemezen levő összes adatot ennek a használatával, ezért\n"
-"csak indokolt esetben válassza ezt a funkciót."
-
-#: ../../help.pm_.c:347
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"OK\" to reboot the system. You can start\n"
-"GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
-"soon as the computer has booted up again.\n"
-"\n"
-"The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"which will automatically perform a whole installation without the help of\n"
-"an operator, similar to the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
-"\n"
-" * \"Replay\". This is a partially automated installation as the\n"
-"partitioning step (and only this one) remains interactive;\n"
-"\n"
-" * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a great number of similar\n"
-"machines. See the Auto install section on our web site;\n"
-"\n"
-" * \"Save packages selection\"(*): saves the package selection as done\n"
-"previously. Then, when doing another installation, insert the floppy inside\n"
-"the drive and run the installation going to the help screen by pressing on\n"
-"the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
-"A telepítés befejeződött; a Linux rendszer készen áll a használatra.\n"
-"A rendszer újraindításához kattintson az \"OK\" gombra. Amikor a gép\n"
-"újraindul, elindíthatja a Linuxt vagy más operációs rendszert (ha több\n"
-"operációs rendszer van a gépen).\n"
-"\n"
-"A \"Speciális\" gomb (csak szakértői módban) lenyomására két újabb gomb\n"
-"jelenik meg:\n"
-"\n"
-" - \"Automatikus telepítőfloppy készítése\": olyan telepítőfloppy\n"
-"készítése, amelynek használatával emberi közreműködés nélkül végezhető\n"
-"a rendszer telepítése. Az így végzett telepítések a jelenlegi telepítés\n"
-"beállításait használják.\n"
-"\n"
-"Két lehetőség közül lehet választani a gomb lenyomása után:\n"
-"\n"
-" - \"Újrajátszás\". Ez részben automatizált telepítést jelent;\n"
-"a partícionálási lépés (csak az az egy) interaktív marad.\n"
-"\n"
-" - \"Automatikus\". Teljesen automatizált telepítés; a merevlemez\n"
-"tartalma felülíródik, az összes korábbi adat elvész.\n"
-"\n"
-"Ez a lehetőség jól használható akkor, amikor nagyobb számú azonos gépre\n"
-"kell a rendszert feltelepíteni. Az automatikus telepítéssel\n"
-"kapcsolatban a Mandrake honlapján találhatók további információk.\n"
-"\n"
-" - \"Csomagösszeállítás mentése\"(*): elmenti a korábban tett\n"
-"csomagkijelölést (a kijelölt csomagok listáját). Ha egy újabb telepítés\n"
-"alkalmával fel kívánja használni az elmentett listát, akkor helyezze be\n"
-"az azt tartalmazó floppyt a telepítés megkezdésekor, majd nyomjon\n"
-"\"F1\"-et, ezután pedig adja ki a következő parancsot:\n"
-"linux defcfg=\"floppy\"\n"
-"\n"
-"\n"
-"(*) Ehhez szükség lesz egy FAT fájlrendszerre formázott floppyra.\n"
-"A formázás Linux alatt a következő paranccsal végezhető el:\n"
-"\"mformat a:\""
-
-#: ../../help.pm_.c:378
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a filesystem).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"any of it.\n"
-"\n"
-"Click on \"OK\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"Cancel\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Az újonnan létrehozott partíciók csak formázás után lesznek használhatók\n"
-"(a \"formázás\" lényegében egy fájlrendszer létrehozását jelenti).\n"
-"\n"
-"Most újraformázhat bizonyos, már létező partíciókat (ha azok tartalmát\n"
-"teljesen le kívánja törölni). Ha ezt kívánja tenni, jelölje ki azon\n"
-"partíciókat is.\n"
-"\n"
-"Nem szükséges újraformázni az összes, korábban létrehozott partíciót.\n"